21 CFR 1271.270 - Records.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Records. 1271.270 Section 1271.270 Food and Drugs... TISSUE-BASED PRODUCTS Current Good Tissue Practice § 1271.270 Records. (a) General. You must maintain records concurrently with the performance of each step required in this subpart and subpart C of this part...

21 CFR 1271.270 - Records.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Records. 1271.270 Section 1271.270 Food and Drugs... TISSUE-BASED PRODUCTS Current Good Tissue Practice § 1271.270 Records. (a) General. You must maintain records concurrently with the performance of each step required in this subpart and subpart C of this part...

Technical Excellence: A Requirement for Good Engineering

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.

2008-01-01

Technical excellence is a requirement for good engineering. Technical excellence has many different ways of expressing itself within engineering. NASA has initiatives that address the enhancement of the Agency's technical excellence and thrust to maintain the associated high level of performance by the Agency on current programs/projects and as it moves into the Constellation Program and the return to the Moon with plans to visit Mars. This paper addresses some of the key initiatives associated with NASA's technical excellence thrust. Examples are provided to illustrate some results being achieved and plans to enhance these initiatives.

Improving indoor air quality through the use of continual multipoint monitoring of carbon dioxide and dew point.

PubMed

Bearg, D W

1998-09-01

This article summarizes an approach for improving the indoor air quality (IAQ) in a building by providing feedback on the performance of the ventilation system. The delivery of adequate quantities of ventilation to all building occupants is necessary for the achievement of good IAQ. Feedback on the performance includes information on the adequacy of ventilation provided, the effectiveness of the distribution of this air, the adequacy of the duration of operation of the ventilation system, and the identification of leakage into the return plenum, either of outdoor or supply air. Keeping track of ventilation system performance is important not only in terms of maintaining good IAQ, but also making sure that this system continues to perform as intended after changes in building use. Information on the performance of the ventilation system is achieved by means of an automated sampling system that draws air from multiple locations and delivers it to both a carbon dioxide monitor and dew point sensor. The use of single shared sensors facilitates calibration checks as well as helps to guarantee data integrity. This approach to monitoring a building's ventilation system offers the possibility of achieving sustainable performance of this important aspect of good IAQ.

Inequalities in maintenance of health and performance between young adult women and men in higher education.

PubMed

Löve, Jesper; Dellve, Lotta; Eklöf, Mats; Hagberg, Mats

2009-04-01

Because of ageing populations, most high-income countries are facing an imminent scarcity of labour. Maintenance of health and performance in young adults therefore becomes a crucial prerequisite for sustainable societies. One major obstruction to this accomplishment is the striking health inequalities between young women and young men. Previously these inequalities have mainly been studied in a cross-sectional way, focusing on ill-health. In this study, we compared the prevalence of maintained health and performance between young adult women and men and the predictors for this outcome. The cohort consisted of 1266 participants from a homogenous sample of university students in Sweden. A combined assessment of self-rated 'very good' health and un-impaired performance took place at three time points (i.e. maintained health and performance). Potential predictors covered stable conditions in health-related behaviours, conditions at work/school and work-home interference. Young women had less maintained health and performance than young men. No major differences in predictors were found. However, there was a tendency for psychosocial factors to be the most important predictors, especially in women. That young women had less maintained health and performance in a homogenous sample beyond well-known differentiating factors suggests explanations other than observable structural differences between the sexes. This was also indicated by the importance attached to perceived demands, and work-home interference, especially in women. The combination of less scheduled, and more unscheduled, schoolwork (i.e. time-flexibility) negatively affected the maintenance of health and performance in our study population, suggesting a focus for future studies.

Highly efficient growth of vertically aligned carbon nanotubes on Fe-Ni based metal alloy foils for supercapacitors

NASA Astrophysics Data System (ADS)

Amalina Raja Seman, Raja Noor; Asyadi Azam, Mohd; Ambri Mohamed, Mohd

2016-12-01

Supercapacitors are highly promising energy devices with superior charge storage performance and a long lifecycle. Construction of the supercapacitor cell, especially electrode fabrication, is critical to ensure good performance in applications. This work demonstrates direct growth of vertically aligned carbon nanotubes (CNTs) on Fe-Ni based metal alloy foils, namely SUS 310S, Inconel 600 and YEF 50, and their use in symmetric vertically aligned CNT supercapacitor electrodes. Alumina and cobalt thin film catalysts were deposited onto the foils, and then CNT growth was performed using alcohol catalytic chemical vapour deposition. By this method, vertically aligned CNTs were successfully grown and used directly as a binder-free supercapacitor electrode to deliver excellent electrochemical performance. The device showed relatively good specific capacitance, a superior rate capability and excellent cycle stability, maintaining about 96% capacitance up to 1000 cycles.

New Water Disinfection Technology for Earth and Space Applications as Part of the NPP Fellowship Research

NASA Technical Reports Server (NTRS)

SilvestryRodriquez, Nadia

2010-01-01

There is the need for a safe, low energy consuming and compact water disinfection technology to maintain water quality for human consumption. The design of the reactor should present no overheating and a constant temperature, with good electrical and optical performance for a UV water treatment system. The study assessed the use of UVA-LEDs to disinfectant water for MS2 Bacteriophage. The log reduction was sufficient to meet US EPA standards as a secondary disinfectant for maintaining water quality control. The study also explored possible inactivation of Pseudomonas aeruginosa and E. coli.

Toward dialysis "a la carte".

PubMed

Funck-Brentano, J L

1987-12-01

From the very beginning, the artificial kidney postponed the death of patients with end-stage renal failure. For years, owing to the performance of the machine, the patient was obliged to follow a severe diet in order to maintain good humoral and circulatory status. Now technological improvements allow "dialysis à la carte," whereby each individual achieves a better clinical status. The next step will be automation of the procedure to improve its security, mainly for dialysis performed at home.

Affective biasing of choices in gambling task decision making.

PubMed

Hinson, John M; Whitney, Paul; Holben, Heather; Wirick, Aaron K

2006-09-01

The proponents of the somatic marker hypothesis presume that rational decision making is guided by emotional reactions that are developed from prior experience. Supporting evidence for the hypothesis comes almost exclusively from the short-term affective reactions that are learned during the course of a hypothetical decision-making task--the gambling task (GT). We examined GT performance and affective reactions to choices when those choices were biased by words that had preexisting affective value. In one experiment, affectively valued words directly signaled good and bad choices. A congruent relation between affective value of word and choice outcome improved GT performance, whereas an incongruent relation greatly interfered with performance. In another experiment, affectively valued words were maintained as a working memory (WM) load between GT choices. A WM load with affectively positive words somewhat improved GT performance, whereas affectively negative words interfered with performance. Somatic markers-indicated by differential anticipatory skin conductance response (SCR) amplitude for good and bad choices-appeared at a point in the GT session when choice performance was superior. However, differential SCR developed during the session after good choice performance was already established. These results indicate that preexisting affective biases can influence GT decision making. In addition, the somatic markers that are regular accompaniments of GT decision making appeared to be temporally lagging indicators of choice performance.

Good death in Japanese cancer care: a qualitative study.

PubMed

Hirai, Kei; Miyashita, Mitsunori; Morita, Tatsuya; Sanjo, Makiko; Uchitomi, Yosuke

2006-02-01

One of the most important goals of palliative care is achieving a "good death" or a "good dying process." The primary aim of this study was to identify the components of a Japanese "good death" through qualitative interviews with cancer patients, their families, physicians, and nurses. Semistructured interviews were conducted. Thirteen advanced cancer patients, 10 family members of such patients, 20 physicians, and 20 nurses were recruited from five regional cancer institutions in Japan. Content analysis was applied to answers, and 58 attributes were extracted and classified into 17 categories as follows: Freedom from pain or physical/psychological symptoms, Having a good family relationship, Dying in one's favorite place/environment, Having a good relationship with medical staff, Not being a burden to others, Maintaining dignity, Completion of life, Maintaining a sense of control, Fighting against cancer, Maintaining hope, Not prolonging life, Contributing to others, Control of future, Not being aware of death, Appreciating others, Maintaining pride, and Having faith. The most frequently cited category was "Freedom from pain or physical/psychological symptoms" and the least common was "Having faith." This study identified important components of a good death in Japan. A future quantitative survey is planned to clarify the generalizability of these findings as the primary endpoint of palliative care in Japan.

Node Redeployment Algorithm Based on Stratified Connected Tree for Underwater Sensor Networks

PubMed Central

Liu, Jun; Jiang, Peng; Wu, Feng; Yu, Shanen; Song, Chunyue

2016-01-01

During the underwater sensor networks (UWSNs) operation, node drift with water environment causes network topology changes. Periodic node location examination and adjustment are needed to maintain good network monitoring quality as long as possible. In this paper, a node redeployment algorithm based on stratified connected tree for UWSNs is proposed. At every network adjustment moment, self-examination and adjustment on node locations are performed firstly. If a node is outside the monitored space, it returns to the last location recorded in its memory along straight line. Later, the network topology is stratified into a connected tree that takes the sink node as the root node by broadcasting ready information level by level, which can improve the network connectivity rate. Finally, with synthetically considering network coverage and connectivity rates, and node movement distance, the sink node performs centralized optimization on locations of leaf nodes in the stratified connected tree. Simulation results show that the proposed redeployment algorithm can not only keep the number of nodes in the monitored space as much as possible and maintain good network coverage and connectivity rates during network operation, but also reduce node movement distance during node redeployment and prolong the network lifetime. PMID:28029124

The Feasibility of a Completely Automated Total IV Anesthesia Drug Delivery System for Cardiac Surgery.

PubMed

Zaouter, Cedrick; Hemmerling, Thomas M; Lanchon, Romain; Valoti, Emanuela; Remy, Alain; Leuillet, Sébastien; Ouattara, Alexandre

2016-10-01

In this pilot study, we tested a novel automatic anesthesia system for closed-loop administration of IV anesthesia drugs for cardiac surgical procedures with cardiopulmonary bypass. This anesthesia drug delivery robot integrates all 3 components of general anesthesia: hypnosis, analgesia, and muscle relaxation. Twenty patients scheduled for elective cardiac surgery with cardiopulmonary bypass were enrolled. Propofol, remifentanil, and rocuronium were administered using closed-loop feedback control. The main objective was the feasibility of closed-loop anesthesia defined as successful automated cardiac anesthesia without manual override by the attending anesthesiologist. Secondary qualitative observations were clinical and controller performances. The clinical performance of hypnosis control was the efficacy to maintain a bispectral index (BIS) of 45. To evaluate the hypnosis performance, BIS values were stratified into 4 categories: "excellent," "good," "poor," and "inadequate" hypnosis control defined as BIS values within 10%, ranging from 11% to 20%, ranging from 21% to 30%, or >30% of the target value, respectively. The clinical performance of analgesia was the efficacy to maintain NociMap values close to 0. The analgesia performance was assessed classifying the NociMap values in 3 pain control groups: -33 to +33 representing excellent pain control, -34 to -66 and +34 to +66 representing good pain control, and -67 to -100 and +67 to +100 representing insufficient pain control. The controller performance was calculated using the Varvel parameters. Robotic anesthesia was successful in 16 patients, which is equivalent to 80% (97.5% confidence interval [CI], 53%-95%) of the patients undergoing cardiac surgery. Four patients were excluded from the final analysis because of technical problems with the automated anesthesia delivery system. The secondary qualitative observations revealed that the clinical performance of hypnosis allowed an excellent and good control during 70% (97.5% CI, 63%-76%) of maintenance time and an insufficient clinical performance of analgesia for only 3% (97.5% CI, 1%-6%) of maintenance time. The completely automated closed-loop system tested in this investigation could be used successfully and safely for cardiac surgery necessitating cardiopulmonary bypass. The results of the present trial showed satisfactory clinical performance of anesthesia control.

78 FR 32541 - Technical Amendments

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-31

... objectives in the most economical and practical manner; and maintaining good public relations with public... economical and practical manner; and maintaining good public relations with public, private and governmental... Enforcement for Mortgage Licensing Act of 2008,\\3\\ which were transferred to the CFPB. \\1\\ Public Law 111-203...

Transparent and Self-Supporting Graphene Films with Wrinkled- Graphene-Wall-Assembled Opening Polyhedron Building Blocks for High Performance Flexible/Transparent Supercapacitors.

PubMed

Li, Na; Huang, Xuankai; Zhang, Haiyan; Li, Yunyong; Wang, Chengxin

2017-03-22

Improving mass loading while maintaining high transparency and large surface area in one self-supporting graphene film is still a challenge. Unfortunately, all of these factors are absolutely essential for enhancing the energy storage performance of transparent supercapacitors for practical applications. To solve the above bottleneck problem, we produce a novel self-supporting flexible and transparent graphene film (STF-GF) with wrinkled-wall-assembled opened-hollow polyhedron building units. Taking advantage of the microscopic morphology, the STF-GF exhibits improved mass loading with high transmittance (70.2% at 550 nm), a large surface area (1105.6 m 2 /g), and good electrochemical performance: high energy (552.3 μWh/cm 3 ), power densities (561.9 mW/cm 3 ), a superlong cycle life, and good cycling stability (the capacitance retention is ∼94.8% after 20,000 cycles).

The Nike KrF laser facility: Performance and initial target experiments

NASA Astrophysics Data System (ADS)

Obenschain, S. P.; Bodner, S. E.; Colombant, D.; Gerber, K.; Lehmberg, R. H.; McLean, E. A.; Mostovych, A. N.; Pronko, M. S.; Pawley, C. J.; Schmitt, A. J.; Sethian, J. D.; Serlin, V.; Stamper, J. A.; Sullivan, C. A.; Dahlburg, J. P.; Gardner, J. H.; Chan, Y.; Deniz, A. V.; Hardgrove, J.; Lehecka, T.; Klapisch, M.

1996-05-01

Krypton-fluoride (KrF) lasers are of interest to laser fusion because they have both the large bandwidth capability (≳THz) desired for rapid beam smoothing and the short laser wavelength (1/4 μm) needed for good laser-target coupling. Nike is a recently completed 56-beam KrF laser and target facility at the Naval Research Laboratory. Because of its bandwidth of 1 THz FWHM (full width at half-maximum), Nike produces more uniform focal distributions than any other high-energy ultraviolet laser. Nike was designed to study the hydrodynamic instability of ablatively accelerated planar targets. First results show that Nike has spatially uniform ablation pressures (Δp/p<2%). Targets have been accelerated for distances sufficient to study hydrodynamic instability while maintaining good planarity. In this review we present the performance of the Nike laser in producing uniform illumination, and its performance in correspondingly uniform acceleration of targets.

Parallel DSMC Solution of Three-Dimensional Flow Over a Finite Flat Plate

NASA Technical Reports Server (NTRS)

Nance, Robert P.; Wilmoth, Richard G.; Moon, Bongki; Hassan, H. A.; Saltz, Joel

1994-01-01

This paper describes a parallel implementation of the direct simulation Monte Carlo (DSMC) method. Runtime library support is used for scheduling and execution of communication between nodes, and domain decomposition is performed dynamically to maintain a good load balance. Performance tests are conducted using the code to evaluate various remapping and remapping-interval policies, and it is shown that a one-dimensional chain-partitioning method works best for the problems considered. The parallel code is then used to simulate the Mach 20 nitrogen flow over a finite-thickness flat plate. It is shown that the parallel algorithm produces results which compare well with experimental data. Moreover, it yields significantly faster execution times than the scalar code, as well as very good load-balance characteristics.

National expenditures, jobs, and economic growth associated with indoor air quality in the United States.

PubMed

Mudarri, David H

2014-05-01

While a number of studies have addressed the economic cost associated with adverse health and productivity effects of poor indoor air quality (IAQ), few have addressed the value of economic expenditures and job creation associated with this industry. This article estimates that the annual sale of IAQ products and services is valued at $18-$30 billion and is associated with approximately 150,000-250,000 current jobs. Compared with other familiar industries, the IAQ market remains relatively small. Given the close association between good IAQ and both job performance of adults and learning performance of children, however, the expenditure to maintain good IAQ in commercial and educational facilities is a useful complement to programs designed to improve education and economic growth.

Hydroponic system design with real time OS based on ARM Cortex-M microcontroller

NASA Astrophysics Data System (ADS)

Atmadja, Wiedjaja; Liawatimena, Suryadiputra; Lukas, Jonathan; Nata, Eka Putra Leo; Alexander, Ivan

2017-12-01

Hydroponic is the process of growing plants without soil, plant root flooded or moist with nutrient-rich solutions in inert material. Hydroponics has become a reality for greenhouse growers in virtually all climates. Large hydroponic installations exist throughout the world for growing flowers, vegetables and some short period fruit like tomato and cucumber. In soilless culture, we must maintain stable pH and conductivity level of nutrient solution to make plant grow well, large variation of pH of certain time will poisoned plant. This paper describes development complete automation hydroponic system, from maintaining stable nutrient composition (conductivity and pH), grow light, and monitor plant environment such as CO2, temperature and humidity. The heart of our automation is ARM Cortex-M4 from ST Microelectronic running ARM mbed OS, the official Real Time Operating System (RTOS) for ARM Cortex-M microcontroller. Using RTOS gives us flexibility to have multithreaded process. Results show that system capable to control desired concentration level with variation of less than 3%, pH sensor show good accuracy 5.83% from pH value 3.23-10. Growing light intensity measurement show result 105 μmol/m2/s therefore we need turn on the light at least 17 hours/day to fulfil plant light requirement. RTOS give good performance with latency and jitter less than 15 us, system overall show good performance and accuracy for automating hydroponic plant in vegetative phase of growth.

Additive-free thick graphene film as an anode material for flexible lithium-ion batteries

NASA Astrophysics Data System (ADS)

Rana, Kuldeep; Kim, Seong Dae; Ahn, Jong-Hyun

2015-04-01

This work demonstrates a simple route to develop mechanically flexible electrodes for Li-ion batteries (LIBs) that are usable as lightweight effective conducting networks for both cathodes and anodes. Removing electrochemically dead elements, such as binders, conducting agents and metallic current collectors, from the battery components will allow remarkable progress in this area. To investigate the feasibility of using thick, additive-free graphene films as anodes for flexible LIBs, we have synthesized and tested thick, additive-free, freestanding graphene films as anodes, first in a coin cell and further in a flexible full cell. As an anode material in a half cell, it showed a discharge capacity of about 350 mA h g-1 and maintained nearly this capacity over 50 cycles at various current rates. This film was also tested as an anode material in a full cell with a LiCoO2 cathode and showed good electrochemical performance. Because the graphene-based flexible film showed good performance in half- and full coin cells, we used this film as a flexible anode for flexible LIBs. No conducting agent or binder was used in the anode side, which helped in realizing the flexible LIBs. Using this, we demonstrate a thin, lightweight and flexible lithium ion battery with good electrochemical performance in both its flat and bent states.This work demonstrates a simple route to develop mechanically flexible electrodes for Li-ion batteries (LIBs) that are usable as lightweight effective conducting networks for both cathodes and anodes. Removing electrochemically dead elements, such as binders, conducting agents and metallic current collectors, from the battery components will allow remarkable progress in this area. To investigate the feasibility of using thick, additive-free graphene films as anodes for flexible LIBs, we have synthesized and tested thick, additive-free, freestanding graphene films as anodes, first in a coin cell and further in a flexible full cell. As an anode material in a half cell, it showed a discharge capacity of about 350 mA h g-1 and maintained nearly this capacity over 50 cycles at various current rates. This film was also tested as an anode material in a full cell with a LiCoO2 cathode and showed good electrochemical performance. Because the graphene-based flexible film showed good performance in half- and full coin cells, we used this film as a flexible anode for flexible LIBs. No conducting agent or binder was used in the anode side, which helped in realizing the flexible LIBs. Using this, we demonstrate a thin, lightweight and flexible lithium ion battery with good electrochemical performance in both its flat and bent states. Electronic supplementary information (ESI) available. See DOI: 10.1039/c4nr06082b

Defining, valuing and providing ecosystem goods and services

Treesearch

Thomas C. Brown; John C. Bergstrom; John B. Loomis

2007-01-01

Ecosystem services are the specific results of ecosystem processes that either directly sustain or enhance human life (as does natural protection from the sun's harmful ultraviolet rays) or maintain the qualify of ecosystem goods (as water purification maintains the quality of streamflow). "Ecosystem service" has come to represent several related topics...

9 CFR 147.26 - Procedures for establishing isolation and maintaining sanitation and good management practices...

Code of Federal Regulations, 2012 CFR

2012-01-01

... rodent population and other pests under control; (6) Tailor vaccination programs to needs of farm and... and maintaining sanitation and good management practices for the control of Salmonella and Mycoplasma... management practices for the control of Salmonella and Mycoplasma infections. (a) The following procedures...

9 CFR 147.26 - Procedures for establishing isolation and maintaining sanitation and good management practices...

Code of Federal Regulations, 2014 CFR

2014-01-01

... rodent population and other pests under control; (6) Tailor vaccination programs to needs of farm and... and maintaining sanitation and good management practices for the control of Salmonella and Mycoplasma... management practices for the control of Salmonella and Mycoplasma infections. (a) The following procedures...

9 CFR 147.26 - Procedures for establishing isolation and maintaining sanitation and good management practices...

Code of Federal Regulations, 2013 CFR

2013-01-01

... rodent population and other pests under control; (6) Tailor vaccination programs to needs of farm and... and maintaining sanitation and good management practices for the control of Salmonella and Mycoplasma... management practices for the control of Salmonella and Mycoplasma infections. (a) The following procedures...

9 CFR 147.26 - Procedures for establishing isolation and maintaining sanitation and good management practices...

Code of Federal Regulations, 2011 CFR

2011-01-01

... and maintaining sanitation and good management practices for the control of Salmonella and Mycoplasma... management practices for the control of Salmonella and Mycoplasma infections. (a) The following procedures...) Allow no visitors except under controlled conditions to minimize the introduction of Salmonella and...

Inventory Control System by Using Vendor Managed Inventory (VMI)

NASA Astrophysics Data System (ADS)

Sabila, Alzena Dona; Mustafid; Suryono

2018-02-01

The inventory control system has a strategic role for the business in managing inventory operations. Management of conventional inventory creates problems in the stock of goods that often runs into vacancies and excess goods at the retail level. This study aims to build inventory control system that can maintain the stability of goods availability at the retail level. The implementation of Vendor Managed Inventory (VMI) method on inventory control system provides transparency of sales data and inventory of goods at retailer level to supplier. Inventory control is performed by calculating safety stock and reorder point of goods based on sales data received by the system. Rule-based reasoning is provided on the system to facilitate the monitoring of inventory status information, thereby helping the process of inventory updates appropriately. Utilization of SMS technology is also considered as a medium of collecting sales data in real-time due to the ease of use. The results of this study indicate that inventory control using VMI ensures the availability of goods ± 70% and can reduce the accumulation of goods ± 30% at the retail level.

Synergistic effects from graphene and carbon nanotubes endow ordered hierarchical structure foams with a combination of compressibility, super-elasticity and stability and potential application as pressure sensors

NASA Astrophysics Data System (ADS)

Kuang, Jun; Dai, Zhaohe; Liu, Luqi; Yang, Zhou; Jin, Ming; Zhang, Zhong

2015-05-01

Nanostructured carbon material based three-dimensional porous architectures have been increasingly developed for various applications, e.g. sensors, elastomer conductors, and energy storage devices. Maintaining architectures with good mechanical performance, including elasticity, load-bearing capacity, fatigue resistance and mechanical stability, is prerequisite for realizing these functions. Though graphene and CNT offer opportunities as nanoscale building blocks, it still remains a great challenge to achieve good mechanical performance in their microarchitectures because of the need to precisely control the structure at different scales. Herein, we fabricate a hierarchical honeycomb-like structured hybrid foam based on both graphene and CNT. The resulting materials possess excellent properties of combined high specific strength, elasticity and mechanical stability, which cannot be achieved in neat CNT and graphene foams. The improved mechanical properties are attributed to the synergistic-effect-induced highly organized, multi-scaled hierarchical architectures. Moreover, with their excellent electrical conductivity, we demonstrated that the hybrid foams could be used as pressure sensors in the fields related to artificial skin.Nanostructured carbon material based three-dimensional porous architectures have been increasingly developed for various applications, e.g. sensors, elastomer conductors, and energy storage devices. Maintaining architectures with good mechanical performance, including elasticity, load-bearing capacity, fatigue resistance and mechanical stability, is prerequisite for realizing these functions. Though graphene and CNT offer opportunities as nanoscale building blocks, it still remains a great challenge to achieve good mechanical performance in their microarchitectures because of the need to precisely control the structure at different scales. Herein, we fabricate a hierarchical honeycomb-like structured hybrid foam based on both graphene and CNT. The resulting materials possess excellent properties of combined high specific strength, elasticity and mechanical stability, which cannot be achieved in neat CNT and graphene foams. The improved mechanical properties are attributed to the synergistic-effect-induced highly organized, multi-scaled hierarchical architectures. Moreover, with their excellent electrical conductivity, we demonstrated that the hybrid foams could be used as pressure sensors in the fields related to artificial skin. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr00841g

A proteinuria cut-off level of 0.7 g/day after 12 months of treatment best predicts long-term renal outcome in lupus nephritis: data from the MAINTAIN Nephritis Trial

PubMed Central

Tamirou, Farah; Lauwerys, Bernard R; Dall'Era, Maria; Mackay, Meggan; Rovin, Brad; Cervera, Ricard; Houssiau, Frédéric A

2015-01-01

Background Although an early decrease in proteinuria has been correlated with good long-term renal outcome in lupus nephritis (LN), studies aimed at defining a cut-off proteinuria value are missing, except a recent analysis performed on patients randomised in the Euro-Lupus Nephritis Trial, demonstrating that a target value of 0.8 g/day at month 12 optimised sensitivity and specificity for the prediction of good renal outcome. The objective of the current work is to validate this target in another LN study, namely the MAINTAIN Nephritis Trial (MNT). Methods Long-term (at least 7 years) renal function data were available for 90 patients randomised in the MNT. Receiver operating characteristic curves were built to test the performance of proteinuria measured within the 1st year as short-term predictor of long-term renal outcome. We calculated the positive and negative predictive values (PPV, NPV). Results After 12 months of treatment, achievement of a proteinuria <0.7 g/day best predicted good renal outcome, with a sensitivity and a specificity of 71% and 75%, respectively. The PPV was high (94%) but the NPV low (29%). Addition of the requirement of urine red blood cells ≤5/hpf as response criteria at month 12 reduced sensitivity from 71% to 41%. Conclusions In this cohort of mainly Caucasian patients suffering from a first episode of LN in most cases, achievement of a proteinuria <0.7 g/day at month 12 best predicts good outcome at 7 years and inclusion of haematuria in the set of criteria at month 12 undermines the sensitivity of early proteinuria decrease for the prediction of good outcome. The robustness of these conclusions stems from the very similar results obtained in two distinct LN cohorts. Trial registration number: NCT00204022. PMID:26629352

With a little help from my assistant: buffering the negative effects of emotional dissonance on dentist performance.

PubMed

Rodríguez-Sánchez, Alma M; Hakanen, Jari J; Perhoniemi, Riku; Salanova, Marisa

2013-10-01

In this study, we hypothesized that dentist' interpersonal resources (good cooperation with one's assistant) together with their personal resources (optimism) buffer the negative effects of emotional dissonance (a demand that occurs when there is a difference between felt and displayed emotions) on job performance (in-role and extra-role performance) over time. We carried out Hierarchical Regression Modeling on a sample of 1954 Finnish dentists who participated in a two-wave 4-year longitudinal study. Results showed that good cooperation with dental assistants buffered the negative effects of emotional dissonance on both in-role and extra-role performance among the dentists in the long term. However, unexpectedly, dentists' high optimism did not buffer their in-role nor extra-role performance over time under conditions of experiencing high emotional dissonance. We conclude that interpersonal job resources such as good cooperation with one's colleagues may buffer the negative effect of emotional dissonance on dentists' job performance even in the long term, whereas the role of personal resources (e.g., optimism) may be less important for maintaining high job performance under conditions of emotional dissonance. The study novelties include the test of the negative effects of emotional dissonance on long-term performance in dentistry and the identification of the job rather than personal resources as the buffers against the negative effects of emotional dissonance on long-term performance. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Managers' duty to maintain good workplace communications skills.

PubMed

Timmins, Fiona

2011-06-01

Communication is a fundamental element of care at every level of nursing practice. It is important, therefore, for nurse managers to create environments that promote and encourage good communication, and help nurses to develop their communication skills formally and informally. This article discusses the effects of communication on the quality of care. It examines nurses' professional duty to maintain good communication skills and how managers can help them do this. It also discusses nurse managers' communication skills in the context of leadership style, conflict resolution and self-awareness. Finally, it considers the notion of shared governance as good practice.

Impact of operating conditions on performance of a novel gas double-dynamic solid-state fermentation bioreactor (GDSFB).

PubMed

Chen, Hongzhang; Li, Yanjun; Xu, Fujian

2013-11-01

A self-designed novel solid-state fermentation (SSF) bioreactor named "gas double-dynamic solid-state fermentation bioreactor (GDSFB)" showed great success in processes for the production of several valuable products. For the present study, a simple GDSFB (2 L in volume) was designed to investigate the impact of exhaust time on SSF performance. Both air pressure and vent aperture significantly influenced the exhaust time. The production of cellulase by Penicillium decumbens JUA10 was studied in this bioreactor. When the vent aperture was maintained at 0.2 cm, the highest FPA activity of 17.2 IU/g dry solid-state medium was obtained at an air pressure of 0.2 MPa (gauge pressure). When the air pressure was maintained at 0.2 MPa, a vent aperture of 0.3 cm gave the highest FPA activity of 18.0 IU/g dry solid-state medium. Further analysis revealed that the exhaust time was a crucial indicator of good performance in GDSFB.

Development of Behaviorally Based Rating Scales for Evaluating the Performance of U. S. Navy Recruits

DTIC Science & Technology

1976-02-01

Providing Knowledgeable and Accu- rate Information About the Navy; G. Administrative Skills; H. Supporting Other Recruiters and the Command; and...groups knowledgeable about Navy recruiting. Special thanks go to CDR Peebles, LT McGann, LCDR Sigmund, and CAPT Hollingworth for coordinating these...Salesmanship Skills E. Establishing and Maintaining Good Relationships in the Community F. Providing Knowledgeable and Accurate Information About the Navy

Wood siding : installing, finishing, maintaining

Treesearch

W.C. Feist; A.E. Oviatt

1983-01-01

Wood siding is put on houses for many good reasons. One reason is that it will keep the bright new “face” of any home attractive for many years to come. In fact, given reasonable care, wood siding will retain its beauty for centuries, as has been amply proved by its performance on houses that date back to early colonial times. It also has great versatility; and the...

Carbon-shell-constrained silicon cluster derived from Al-Si alloy as long-cycling life lithium ion batteries anode

NASA Astrophysics Data System (ADS)

Su, Junming; Zhang, Congcong; Chen, Xiang; Liu, Siyang; Huang, Tao; Yu, Aishui

2018-03-01

Although silicon is the most promising anode material for Li-ion batteries, large volume expansion during lithiation and delithiation is the main obstacle limiting the commercial application of silicon anodes. There are two ways to alleviate volume expansion and prevent further pulverization of a Si anode: fabrication of a rational nanostructure possessing void spaces and uniform distribution of the conducting sites, without a good balance effect in mitigating the limiting factors and enhancing battery performance. In this paper, we propose a novel nanostructure - a carbon-shell-constrained Si cluster (Si/C shell) with both adequate void space and good distribution of electrical contact sites to guarantee homogeneous lithiation in the initial cycle. Benefiting from the ability to maintain electrical conductivity of the outer carbon shell, even after cluster fragmentation, the Si/C shell synthesized from low-cost commercial Al-Si alloy spheres can deliver 0.03% capacity loss from 100th to 1000th cycles at a current density of 1 A g-1. The Si/C shell sample with the dual functional structure mentioned above can also maintain its own nanostructure during cycling and deliver excellent rate performance. It is a concise and scalable strategy which can simplify the preparation of other alloy anode materials for Li-ion batteries.

Culture-specific patterns in the prediction of life satisfaction: roles of emotion, relationship quality, and self-esteem.

PubMed

Kang, Sun-Mee; Shaver, Phillip R; Sue, Stanley; Min, Kyung-Hwan; Jing, Hauibin

2003-12-01

This study was conducted to explore the culture-specific roles of emotion, relationship quality, and self-esteem in determining life satisfaction. It was hypothesized that maintaining good interpersonal relationships would make individuals in collectivistic cultures not only feel good about their lives but also feel better about themselves. Furthermore, two emotion variables--emotional expression and emotion differentiation--were proposed as possible determinants of relationship quality. It was hypothesized that emotional expressiveness would be more important for maintaining good interpersonal relationships in individualistic societies but emotion differentiation would be more important in collectivistic cultures. These hypotheses were tested with Euro-American, Asian American, Korean, and Chinese groups using multigroup analyses in a structural equation model. Results supported all proposed hypotheses and indicated that emotion differentiation contributes to maintaining good interpersonal relationships in collectivistic cultures, which contributes to self-esteem and satisfaction with life.

Man-machine cooperation in advanced teleoperation

NASA Technical Reports Server (NTRS)

Fiorini, Paolo; Das, Hari; Lee, Sukhan

1993-01-01

Teleoperation experiments at JPL have shown that advanced features in a telerobotic system are a necessary condition for good results, but that they are not sufficient to assure consistently good performance by the operators. Two or three operators are normally used during training and experiments to maintain the desired performance. An alternative to this multi-operator control station is a man-machine interface embedding computer programs that can perform some of the operator's functions. In this paper we present our first experiments with these concepts, in which we focused on the areas of real-time task monitoring and interactive path planning. In the first case, when performing a known task, the operator has an automatic aid for setting control parameters and camera views. In the second case, an interactive path planner will rank different path alternatives so that the operator will make the correct control decision. The monitoring function has been implemented with a neural network doing the real-time task segmentation. The interactive path planner was implemented for redundant manipulators to specify arm configurations across the desired path and satisfy geometric, task, and performance constraints.

46 CFR 92.07-90 - Vessels contracted for prior to July 1, 1968.

Code of Federal Regulations, 2010 CFR

2010-10-01

... as they are maintained in good condition to the satisfaction of the Officer in Charge, Marine... satisfaction of the Officer in Charge, Marine Inspection. (b) For industrial vessels of 300 gross tons and over... satisfactory so long as they are maintained in good condition to the satisfaction of the Officer in Charge...

Orion Exploration Flight Test-1 Post-Flight Navigation Performance Assessment Relative to the Best Estimated Trajectory

NASA Technical Reports Server (NTRS)

Gay, Robert S.; Holt, Greg N.; Zanetti, Renato

2016-01-01

This paper details the post-flight navigation performance assessment of the Orion Exploration Flight Test-1 (EFT-1). Results of each flight phase are presented: Ground Align, Ascent, Orbit, and Entry Descent and Landing. This study examines the on-board Kalman Filter uncertainty along with state deviations relative to the Best Estimated Trajectory (BET). Overall the results show that the Orion Navigation System performed as well or better than expected. Specifically, the Global Positioning System (GPS) measurement availability was significantly better than anticipated at high altitudes. In addition, attitude estimation via processing GPS measurements along with Inertial Measurement Unit (IMU) data performed very well and maintained good attitude throughout the mission.

fMRI brain activation in patients with insomnia disorder during a working memory task.

PubMed

Son, Young-Don; Kang, Jae Myeong; Cho, Seong-Jin; Lee, Jung-Sun; Hwang, Hee Young; Kang, Seung-Gul

2018-05-01

This study used functional magnetic resonance imaging (fMRI) to investigate differences in the functional brain activation of patients with insomnia disorder (n = 21, mean age = 36.6) and of good sleepers (n = 26, mean age = 33.2) without other comorbidities or structural brain abnormalities during a working memory task. All participants completed a clinical questionnaire, were subjected to portable polysomnography (PSG), and performed the working memory task during an fMRI scan. The subjects who were suspected of major sleep disorder and comorbid psychiatric disorders except insomnia disorder were excluded. To compare the brain activation on working memory from the insomnia group with those from the good-sleeper group, a two-sample t test was performed. Statistical significance was determined using 3DClustSim with the updated algorithm to obtain a reasonable cluster size and p value for each analysis. We observed higher levels of brain activation in the right lateral inferior frontal cortex and the right superior temporal pole in the insomnia group compared to good sleepers (cluster-based multiple comparison correction, p < 0.001, k = 34 @ α = 0.01). Thus, patients with insomnia disorder showed increased brain activation during working memory relative to good sleepers, and this may be indicative of compensatory brain activation to maintain cognitive performance in patients with insomnia disorder without other comorbidities.

Design and evaluation of a robust dynamic neurocontroller for a multivariable aircraft control problem

NASA Technical Reports Server (NTRS)

Troudet, T.; Garg, S.; Merrill, W.

1992-01-01

The design of a dynamic neurocontroller with good robustness properties is presented for a multivariable aircraft control problem. The internal dynamics of the neurocontroller are synthesized by a state estimator feedback loop. The neurocontrol is generated by a multilayer feedforward neural network which is trained through backpropagation to minimize an objective function that is a weighted sum of tracking errors, and control input commands and rates. The neurocontroller exhibits good robustness through stability margins in phase and vehicle output gains. By maintaining performance and stability in the presence of sensor failures in the error loops, the structure of the neurocontroller is also consistent with the classical approach of flight control design.

A facile method to prepare dual-functional membrane for efficient oil removal and in situ reversible mercury ions adsorption from wastewater

NASA Astrophysics Data System (ADS)

Zhang, Qingdong; Liu, Na; Cao, Yingze; Zhang, Weifeng; Wei, Yen; Feng, Lin; Jiang, Lei

2018-03-01

In this work, a novel thiol covered polyamide (nylon 66) microfiltration membrane was fabricated by combining mussel-inspired chemistry and coupling reaction, which owns excellent dual-function that can simultaneously remove oil from water efficiently and adsorb the mercury ions contained in the wastewater reversibly. Such membrane exhibited high oil/water separation efficiency, outstanding mercury adsorption ability, and good stability. Moreover, it can be regenerated in nitric acid solution, and maintain its good adsorption performance. The as-prepared membrane showed great potentials for water purification to reduce the heavy metal ion pollution and complicated industrial oily wastewater and living wastewater.

Teaching oral hygiene to children with autism.

PubMed

Pilebro, C; Bäckman, B

2005-01-01

The need for improved oral hygiene routines in individuals with disabilities has been documented in many reports. The aim of this study was to evaluate whether visual pedagogy is a suitable way to teach children with autism how to brush their teeth. The investigation took the form of a prospective study including clinical examinations and structured interviews. Based on visual pedagogy, a series of pictures were produced that showed a structured method and technique of tooth brushing. The pictures were placed in the bathroom or wherever tooth brushing was performed. Fourteen children with autism aged between 5 and 13 years (mean age = 9.3 years), and their parents participated. Before the study, all parents found it difficult/very difficult to maintain good oral hygiene in their child. All children had visible plaque on their maxillary incisors and canines. After 12 months, the amount of visible plaque was reduced. After 18 months, most parents found maintaining good oral hygiene easier than before the study. All but one child/parent adopted the programme. Visual pedagogy is a useful tool in helping people with autism to improve their oral hygiene.

A merged pipe organ binary-analog correlator

NASA Astrophysics Data System (ADS)

Miller, R. S.; Berry, M. B.

1982-02-01

The design of a 96-stage, programmable binary-analog correlator is described. An array of charge coupled device (CCD) delay lines of differing lengths perform the delay and sum functions. Merging of several CCD channels is employed to reduce the active area. This device architecture allows simplified output detection while maintaining good device performance at higher speeds (5-10 MHz). Experimental results indicate a 50 dB broadband dynamic range and excellent agreement with the theoretical processing gain (19.8 dB) when operated at a 6 MHz sampling frequency as a p-n sequence matched filter.

Concurrent design of an RTP chamber and advanced control system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spence, P.; Schaper, C.; Kermani, A.

1995-12-31

A concurrent-engineering approach is applied to the development of an axisymmetric rapid-thermal-processing (RTP) reactor and its associated temperature controller. Using a detailed finite-element thermal model as a surrogate for actual hardware, the authors have developed and tested a multi-input multi-output (MIMO) controller. Closed-loop simulations are performed by linking the control algorithm with the finite-element code. Simulations show that good temperature uniformity is maintained on the wafer during both steady and transient conditions. A numerical study shows the effect of ramp rate, feedback gain, sensor placement, and wafer-emissivity patterns on system performance.

Pavement condition assessment to forecast maintenance program on JKR state roads in Petaling district

NASA Astrophysics Data System (ADS)

Hamsan, R.; Hafiz, H.; Azlan, A.; Keprawi, M. F.; Malik, A. K. A.; Adamuddin, A.; Abdullah, A. H.; Shafie, A. M.

2018-02-01

This research allows local authorities to project road maintenance in term of activities and financial expenditure through pavement condition assessment and then Highway Development and Management (HDM-4) analysis. Current form of road maintenance carried out by local authority is on reactive manner where corrective actions were taken based on reports recorded. Some went unrecorded hence causing prolonged damages. This causes the local authority unable to project the required cost to maintain the roads. This affects the socio-economy of the surrounding routes. Hence, it is seen, as preventive maintenance of the roads will provide more feasible option in term of work force and finance to the local authority. To overcome this issue, a preventive model was introduced. This was done through pavement condition assessment (PCA) where analysis was done through HDM-4. Nondestructive test and destructive test were conducted in order to provide an indicator to the road's health. This were then analyzed in HDM-4 where the result was benchmarked with maintenance standard. The scope of this research is set to PCA where DT and NDT were performed on the routes of Petaling and the output is analyzed in HDM-4. The result of this research provides a 10 years forecast maintenance budget in maintaining the roads in Petaling. This allows the local authority to perform good practice in term of maintaining the roads while at the same time helps them in forecasting their budget for the upcoming years. This research will have a strong impact on the local socio-economy as well as local road user confidence towards the authority over good practices. This research can be further expanded to other type of roads as well as highway bridges.

Pay for performance of Estonian family doctors and impact of different practice- and patient-related characteristics on a good outcome: A quantitative assessment.

PubMed

Merilind, Eero; Salupere, Rauno; Västra, Katrin; Kalda, Ruth

2016-01-01

Several practice- and patient-related characteristics are reported to have an influence on a good quality outcome. Estonia started the pay-for-performance (P4P) system for family doctors (FDs) in 2006. Every year the number of FDs participating in P4P has increased, but only half of the FDs achieved good outcome. The aim of this study was to find out which practice- and patient-related characteristics could have an impact on a good outcome. The study was conducted using the database from the Estonian Health Insurance Fund. All working FDs were divided into two groups (with "good" and "poor" outcomes) according their achievements in P4P. We chose characteristics which described structure (practice list size, number of doctors, composition of FDs list: age, number of chronically ill patients) during the observation period 2006-2012. During the observation period 2006-2012, the number of FDs with a good outcome in P4P increased from 6% (2006) to 53% (2012). The high number of FDs in primary care teams, longer experience of participation in P4P and the smaller number of patients on FDs' lists all have an impact on a good outcome. The number of chronically ill patients in FDs lists has no significant effect on an outcome, but P4P increases the number of disease-diagnosed patients. Different practice and patient-related characteristics have an impact on a good outcome. As workload increases, smaller lists of FDs patients or increased staff levels are needed in order to maintain a good outcome. Copyright © 2016 The Lithuanian University of Health Sciences. Production and hosting by Elsevier Urban & Partner Sp. z o.o. All rights reserved.

Structure and Dynamics of End-to-End Loop Formation of the Penta-Peptide Cys-Ala-Gly-Gln-Trp in Implicit Solvents

DTIC Science & Technology

2009-01-01

implicit solvents on peptide structure and dynamics , we performed extensive molecular dynamics simulations on the penta-peptide Cys-Ala-Gly-Gln-Trp. Two...end-to-end distances and dihedral angles obtained from molecular dynamics simulations with implicit solvent models were in a good agreement with those...to maintain the temperature of the systems. Introduction Molecular dynamics (MD) simulation techniques are widely used to study structure and

Software engineering

NASA Technical Reports Server (NTRS)

Fridge, Ernest M., III; Hiott, Jim; Golej, Jim; Plumb, Allan

1993-01-01

Today's software systems generally use obsolete technology, are not integrated properly with other software systems, and are difficult and costly to maintain. The discipline of reverse engineering is becoming prominent as organizations try to move their systems up to more modern and maintainable technology in a cost effective manner. The Johnson Space Center (JSC) created a significant set of tools to develop and maintain FORTRAN and C code during development of the space shuttle. This tool set forms the basis for an integrated environment to reengineer existing code into modern software engineering structures which are then easier and less costly to maintain and which allow a fairly straightforward translation into other target languages. The environment will support these structures and practices even in areas where the language definition and compilers do not enforce good software engineering. The knowledge and data captured using the reverse engineering tools is passed to standard forward engineering tools to redesign or perform major upgrades to software systems in a much more cost effective manner than using older technologies. The latest release of the environment was in Feb. 1992.

Incidentally diagnosed melorheostosis of upper limb: case report.

PubMed

Vyskocil, Vaclav; Koudela, Karel; Pavelka, Tomas; Stajdlova, Kristyna; Suchy, David

2015-01-31

Melorheostosis is quite a rare bone disease with still unclear ethiology. Although multifocal affection is highly debilitating with unfavorable prognosis, there is no clear consensus about therapeutical approach. There is still insufficient evidence in the literature for almost a century after the first description. Affected bone has a typical appearance of melting wax. Diagnosis is usually incidental with pain as a leading symptom. Diagnosis itself is relatively easy, routine X-ray examination is sufficient. Even though it could be easily overlooked and mistaken with other diseases. Melorheostosis is incurable, the therapy is mostly focused on maintaining patient quality of life. Presented case is unique in terms of extent of the affection (index finger, metacarp shaft, carpal bones, forearm, humerus and whole scapula) in combination with osteopoikilotic islands in other 3 regions (vertebrae, manubrium sterni and left collar bone). Currently there is only one such a case published in the literature (Campbell), but without osteopoikilotic islands. Melorheostosis was diagnosed in 26-year old female after injury as an incidental finding. This was quite surprising as the patient already suffered by limited movement in the upper limb and pain before the injury. Detailed examination were performed to confirm the diagnosis, no family history was found. Pharmacotherapy with bisphosphonates, non-steroidal antirheumatics and vasodilatans/rheologic drugs seemed to be effective to maintain the relatively good quality of patient life and good performance in daily routine. Questionable is further development of patient performance status and sustainability of conservative treatment in the long term follow up. Conservative treatment with bisphopshonates and COX-2 inhibitors in combination with naftidrofuryl can delay surgery solution.

Forecasting Advancement Rates to Petty Officer Third Class for U.S. Navy Hospital Corpsmen

DTIC Science & Technology

2014-06-01

variable. c. Designation of Data Subsets for Cross-Validation In order to maintain the integrity of the analysis and test the fitted models’ predictive...two models, an H-L goodness-of-fit test is conducted on the 1,524 individual Sailors within the designated test data set; the results of which are...the total number of sea months, the proportion of vacancies to test takers, Armed Forces Qualification Test score, and performance mark average

Method of manufacturing a heat pipe wick with structural enhancement

DOEpatents

Andraka, Charles E [Albuquerque, NM; Adkins, Douglas R [Albuquerque, NM; Moreno, James B [Albuquerque, NM; Rawlinson, K Scott [Albuquerque, NM; Showalter, Steven K [Albuquerque, NM; Moss, Timothy A [Albuquerque, NM

2006-10-24

Heat pipe wick structure wherein a stout sheet of perforated material overlays a high performance wick material such as stainless steel felt affixed to a substrate. The inventive structure provides a good flow path for working fluid while maintaining durability and structural stability independent of the structure (or lack of structure) associated with the wick material. In one described embodiment, a wick of randomly laid .about.8 micron thickness stainless steel fibers is sintered to a metal substrate and a perforated metal overlay.

Heat pipe wick with structural enhancement

DOEpatents

Andraka, Charles E.; Adkins, Douglas R.; Moreno, James B.; Rawlinson, K. Scott; Showalter, Steven K.; Moss, Timothy A.

2003-11-18

Heat pipe wick structure wherein a stout sheet of perforated material overlays a high performance wick material such as stainless steel felt affixed to a substrate. The inventive structure provides a good flow path for working fluid while maintaining durability and structural stability independent of the structure (or lack of structure) associated with the wick material. In one described embodiment, a wick of randomly laid .about.8 micron thickness stainless steel fibers is sintered to a metal substrate and a perforated metal overlay.

Firefighters' Radios

NASA Technical Reports Server (NTRS)

1976-01-01

Public Technology Inc. asked for NASA assistance to devise the original firefighter's radio. Good short-range radio communications are essential during a fire to coordinate hose lines, rescue victims, and otherwise increase efficiency. Useful firefighting tool is lower cost, more rugged short range two-way radio. Inductorless electronic circuit replaced inductances and coils in radio circuits with combination of transistors and other low-cost components. Substitution promises reduced circuit size and cost. Enhanced electrical performance made radio more durable and improved maintainability by incorporating modular construction.

[Therapeutic strategies against myasthenia gravis].

PubMed

Utsugisawa, Kimiaki; Nagane, Yuriko

2013-05-01

Many patients with myasthenia gravis (MG) still find it difficult to maintain daily activities due to chronic residual fatigability and long-term side effects of oral corticosteroids, since full remission is not common. Our analysis demonstrated that disease severity, oral corticosteroids, and depressive state are the major factors negatively associated with QOL, and that QOL of MM status patients taking < or = 5 mg prednisolne/day is identically good as that seen in CSR and is a target of treatment. In order to achieve early MM or better status with prednisolne < or = 5 mg/day, we advocate the early aggressive treatment strategy that can achieve early improvement by performing an aggressive therapy using combined treatment with plasmapheresis and high-dose intravenous methylprednisolone and then maintain an improved status using low-dose oral corticosteroids and calcineurin inhibitors.

D-Shaped Polarization Maintaining Fiber Sensor for Strain and Temperature Monitoring.

PubMed

Qazi, Hummad Habib; Mohammad, Abu Bakar; Ahmad, Harith; Zulkifli, Mohd Zamani

2016-09-15

A D-shaped polarization-maintaining fiber (PMF) as fiber optic sensor for the simultaneous monitoring of strain and the surrounding temperature is presented. A mechanical end and edge polishing system with aluminum oxide polishing film is utilized to perform sequential polishing on one side (lengthwise) of the PMF in order to fabricate a D-shaped cross-section. Experimental results show that the proposed sensor has high sensitivity of 46 pm/µε and 130 pm/°C for strain and temperature, respectively, which is significantly higher than other recently reported work (mainly from 2013) related to fiber optic sensors. The easy fabrication method, high sensitivity, and good linearity make this sensing device applicable in various applications such as health monitoring and spatial analysis of engineering structures.

D-Shaped Polarization Maintaining Fiber Sensor for Strain and Temperature Monitoring

PubMed Central

Qazi, Hummad Habib; Mohammad, Abu Bakar; Ahmad, Harith; Zulkifli, Mohd Zamani

2016-01-01

A D-shaped polarization-maintaining fiber (PMF) as fiber optic sensor for the simultaneous monitoring of strain and the surrounding temperature is presented. A mechanical end and edge polishing system with aluminum oxide polishing film is utilized to perform sequential polishing on one side (lengthwise) of the PMF in order to fabricate a D-shaped cross-section. Experimental results show that the proposed sensor has high sensitivity of 46 pm/µε and 130 pm/°C for strain and temperature, respectively, which is significantly higher than other recently reported work (mainly from 2013) related to fiber optic sensors. The easy fabrication method, high sensitivity, and good linearity make this sensing device applicable in various applications such as health monitoring and spatial analysis of engineering structures. PMID:27649195

Factors of importance for maintaining work as perceived by men with arthritis.

PubMed

Österholm, Johannes Hjalmarsson; Björk, Mathilda; Håkansson, Carita

2013-01-01

Employment rates are significantly lower among individuals with arthritis compared to a general population. There is, however, limited research about how men with arthritis perceive their ability to maintain working. The aim of this study was thus to explore their perception of this. Nine employed men with arthritis were purposively sampled. Interviews were performed and were informed by the central concepts of the Model of Human Occupation. The Empirical Phenomenological Psychological method was modified and used to analyze and interpret collected data. The findings showed that men with arthritis perceived a desire to work, adjusted their activity pattern, were aware of their own capabilities, had good work conditions, had environmental support and used effective medication to maintain their ability to work. The findings suggest that health care professionals can help men with arthritis to find strategies and a balance between recreation and work. Ultimately, this knowledge could guide health care professionals to target men needing interventions to prevent sick leave.

Study of the performance of the infrasound Station IS48TN during the period 2011 -2017

NASA Astrophysics Data System (ADS)

Mejri, Chourouk

2017-04-01

The Infrasound Station IS48, in Kesra, Tunisia is part of the verification regime for the Comprehensive Nuclear-Test-Ban Treaty. IS48 is managed and maintained by the Tunisian NDC. Its good location in the middle of the Mediterranean Sea allows to have various and interesting detections. Several events were recorded and identified. But since 2010, the performance of the station has began to be noisy , due to a leakage in the pipe array, despite efforts to solve the issue through the pressure test and maintenance . To this issues, PTS decided to upgrade the WNRS at IS48TN.

The Integration Process of Very Thin Mirror Shells with a Particular Regard to Simbol-X

NASA Astrophysics Data System (ADS)

Basso, S.; Pareschi, G.; Tagliaferri, G.; Mazzoleni, F.; Valtolina, R.; Citterio, O.; Conconi, P.

2009-05-01

The optics of Simbol-X are very thin compared to previous X-ray missions (like XMM). Therefore their shells floppy and are unable to maintain the correct shape. To avoid the deformations of their very thin X-ray optics during the integration process we adopt two stiffening rings with a good roundness. In this article the procedure used for the first three prototypes of the Simbol-X optics is presented with a description of the problems involved and with an analysis of the degradation of the performances during the integration. This analysis has been performed with the UV vertical bench measurements at INAF-OAB.

Successful extension of tocilizumab infusion intervals from 4 weeks to 6 or 5 weeks in 90% of RA patients with good response to 4-week intervals.

PubMed

Saiki, Osamu; Uda, Hiroshi

2017-01-01

A period of 4 weeks (w) has been recommended as the interval between tocilizumab (TCZ) infusions for rheumatoid arthritis (RA). However, treating the patients with TCZ (8 mg/kg), we experienced that longer intervals were also effective. We conducted the study to investigate whether the intervals of TCZ infusions could extend from 4w to 5 or 6w. This was a retrospective observational study. RA patients who had shown good response to TCZ infusions at 4w intervals were enrolled, and the intervals of TCZ infusions were extended to 5w. Next, the intervals of TCZ infusion were extended to 6w for the patients who had maintained good response with 5w intervals. The patients who had maintained good response for more than two years were estimated as responders. One hundred patients were enrolled in the present study, and 62 patients maintained good response with 6w-interval infusions, and 28 patients with 5w-interval infusions, indicating that 90% of patients who had shown good response with 4w intervals could extend the intervals from 4w to 5 or 6w. The present study provides evidence that most of RA patients who showed good response to TCZ infusions at 4w could extend the intervals to 6w or 5w. This finding should be of great interest for both financial and labour reasons.

Child and Adolescent Perceptions of Oral Health Over the Life Course

PubMed Central

Maida, Carl A.; Marcus, Marvin; Hays, Ron D.; Coulter, Ian D.; Ramos-Gomez, Francisco; Lee, Steve Y.; McClory, Patricia S.; Van, Laura V.; Wang, Yan; Shen, Jie; Cai, Li; Spolsky, Vladimir W.; Crall, James J.; Liu, Honghu

2016-01-01

Purpose To elicit perceptions of oral health in children and adolescents as an initial step in the in the development of oral health item banks for the Patient-Reported Oral Health Outcomes Measurement Information System project. Methods We conducted focus groups with ethnically, socioeconomically, and geographically diverse youth (8-12, 13-17 years) to identify perceptions of oral health status. We performed content analysis, including a thematic and narrative analysis, to identify important themes. Results We identified three unique themes that the youth associated with their oral health status: 1) understanding the value of maintaining good oral health over the life course, with respect to longevity and quality of life in the adult years; 2) positive association between maintaining good oral health and interpersonal relationships at school, and dating, for older youth; and 3) knowledge of the benefits of orthodontic treatment to appearance and positive self-image, while holding a strong view as to the discomfort associated with braces. Conclusions The results provide valuable information about core domains for the oral health item banks to be developed and generated content for new items to be developed and evaluated with cognitive interviews and in a field test. PMID:26038216

Innovative hyperchaotic encryption algorithm for compressed video

NASA Astrophysics Data System (ADS)

Yuan, Chun; Zhong, Yuzhuo; Yang, Shiqiang

2002-12-01

It is accepted that stream cryptosystem can achieve good real-time performance and flexibility which implements encryption by selecting few parts of the block data and header information of the compressed video stream. Chaotic random number generator, for example Logistics Map, is a comparatively promising substitute, but it is easily attacked by nonlinear dynamic forecasting and geometric information extracting. In this paper, we present a hyperchaotic cryptography scheme to encrypt the compressed video, which integrates Logistics Map with Z(232 - 1) field linear congruential algorithm to strengthen the security of the mono-chaotic cryptography, meanwhile, the real-time performance and flexibility of the chaotic sequence cryptography are maintained. It also integrates with the dissymmetrical public-key cryptography and implements encryption and identity authentification on control parameters at initialization phase. In accord with the importance of data in compressed video stream, encryption is performed in layered scheme. In the innovative hyperchaotic cryptography, the value and the updating frequency of control parameters can be changed online to satisfy the requirement of the network quality, processor capability and security requirement. The innovative hyperchaotic cryprography proves robust security by cryptoanalysis, shows good real-time performance and flexible implement capability through the arithmetic evaluating and test.

Constant-Envelope Waveform Design for Optimal Target-Detection and Autocorrelation Performances

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sen, Satyabrata

2013-01-01

We propose an algorithm to directly synthesize in time-domain a constant-envelope transmit waveform that achieves the optimal performance in detecting an extended target in the presence of signal-dependent interference. This approach is in contrast to the traditional indirect methods that synthesize the transmit signal following the computation of the optimal energy spectral density. Additionally, we aim to maintain a good autocorrelation property of the designed signal. Therefore, our waveform design technique solves a bi-objective optimization problem in order to simultaneously improve the detection and autocorrelation performances, which are in general conflicting in nature. We demonstrate this compromising characteristics of themore » detection and autocorrelation performances with numerical examples. Furthermore, in the absence of the autocorrelation criterion, our designed signal is shown to achieve a near-optimum detection performance.« less

Aerodynamic Performance of an Active Flow Control Configuration Using Unstructured-Grid RANS

NASA Technical Reports Server (NTRS)

Joslin, Ronald D.; Viken, Sally A.

2001-01-01

This research is focused on assessing the value of the Reynolds-Averaged Navier-Stokes (RANS) methodology for active flow control applications. An experimental flow control database exists for a TAU0015 airfoil, which is a modification of a NACA0015 airfoil. The airfoil has discontinuities at the leading edge due to the implementation of a fluidic actuator and aft of mid chord on the upper surface. This paper documents two- and three-dimensional computational results for the baseline wing configuration (no control) with tile experimental results. The two-dimensional results suggest that the mid-chord discontinuity does not effect the aerodynamics of the wing and can be ignored for more efficient computations. The leading-edge discontinuity significantly affects tile lift and drag; hence, the integrity of the leading-edge notch discontinuity must be maintained in the computations to achieve a good match with the experimental data. The three-dimensional integrated performance results are in good agreement with the experiments inspite of some convergence and grid resolution issues.

Main medical results of extended flights on space station Mir in 1986-1990

NASA Astrophysics Data System (ADS)

Grigoriev, A. I.; Bugrov, S. A.; Bogomolov, V. V.; Egorov, A. D.; Polyakov, V. V.; Tarasov, I. K.; Shulzhenko, E. B.

During 1986-1990 seven prime spacecrews (16 cosmonauts) have flow on-board the Mir orbital complex. The longest space mission duration was 366 days. The principal objectives of the medical tasks were the maintenance of good health and performance of the spacecrews and conducting medical research programs which included study of the cardiovascular, motor, endocrine, blood, immune, and metabolic systems. Results obtained point to the ability of humans to readily adapt to a year-long stay in space and maintain good health and performance. Readaptation had a similar course as after other previous long-term space flights of up to 8 months in duration. Primary body system changes were not qualitatively different from findings after flights aboard the Salyut 6 and 7 space stations. In this case, during and after an 11-12 month flight, body system alterations were even less severe which was a result of adequate countermeasure use, their systematic and creative employment and maintenance of required environments to support life and work in space.

The Design and Performance Evaluation of Hydroformed Tubular Torsion Beam Axle

NASA Astrophysics Data System (ADS)

Kim, Jaehyun; Oh, Jinho; Choi, Hanho

2010-06-01

Suspensions for vehicles are structural devices used for suspending a vehicle body and absorbing shocks from the road. Thus, the suspensions must be designed such that they can attenuate shocks from a road and make passengers feel comfortable despite the shocks, and improve steering stability, determined by the ground contact force of tires during running of vehicles. Another important factor to be considered while designing suspensions is that the suspensions must maintain desired stiffness and desired durability despite the repeated application of shocks from roads thereto. The present relates, in general, to a tubular torsion beam for rear suspensions of vehicles and a manufacturing method thereof and, more particularly, to the provision of tubular torsion beams having excellent roll stiffness and excellent roll strength, produced through hydroforming. The hydroforming technology has a lot of benefit which is shape accuracy, good durability caused by compressive pressure, and good forming quality. In this study, the performance evaluation of the hydroformed tubular torsion beam axle is evaluated.

The health belief model and determinants of oral hygiene practices and beliefs in preteen children: a pilot study.

PubMed

Walker, Kimberly; Jackson, Richard

2015-01-01

There is limited understanding of children's behavioral decisions for practicing good oral hygiene. The purpose of this study was to identify factors that may motivate children to practice good oral hygiene. Guided by the Health Belief Model (HBM), eight focus groups of 42 American children (second through fifth graders) were interviewed concerning their histories with caries, perceived confidence in brushing, self-perceived susceptibility and vulnerability for caries and/or poor oral health, and perceived benefits and barriers to practicing oral hygiene. Most children equated good oral health as being central to their overall health; however, some viewed poor oral health as occurring only in the elderly while others believed poor oral health could begin at any age. Children cited esthetic appearance of teeth and the desire to please others by brushing without reminders as motivators of good oral hygiene. The greatest barriers to performing oral hygiene were a perceived lack of time and limited access to toothbrushes and dentifrice when away. To motivate children in this age range, emphasis should be placed on the positive aspects of maintaining good oral hygiene for its contribution to appearance and its implication for an overall healthy body and self-image.

16 CFR 1025.66 - Qualifications and standards of conduct.

Code of Federal Regulations, 2011 CFR

2011-01-01

... standards of conduct. (a) Good faith transactions. The Commission expects all persons appearing in... conducted in good faith. (b) Exclusion of parties, participants, or their representatives. To maintain... reasonable standards of orderly and ethical conduct, failure to act in good faith, or violation of the...

Software reengineering

NASA Technical Reports Server (NTRS)

Fridge, Ernest M., III

1991-01-01

Today's software systems generally use obsolete technology, are not integrated properly with other software systems, and are difficult and costly to maintain. The discipline of reverse engineering is becoming prominent as organizations try to move their systems up to more modern and maintainable technology in a cost effective manner. JSC created a significant set of tools to develop and maintain FORTRAN and C code during development of the Space Shuttle. This tool set forms the basis for an integrated environment to re-engineer existing code into modern software engineering structures which are then easier and less costly to maintain and which allow a fairly straightforward translation into other target languages. The environment will support these structures and practices even in areas where the language definition and compilers do not enforce good software engineering. The knowledge and data captured using the reverse engineering tools is passed to standard forward engineering tools to redesign or perform major upgrades to software systems in a much more cost effective manner than using older technologies. A beta vision of the environment was released in Mar. 1991. The commercial potential for such re-engineering tools is very great. CASE TRENDS magazine reported it to be the primary concern of over four hundred of the top MIS executives.

Healthy Learning.

ERIC Educational Resources Information Center

Kennedy, Mike

2003-01-01

Offers ten suggestions for schools and universities to help maintain a healthy indoor environment: proper flooring, sanitary washrooms, consistent maintenance, indoor air quality, preventing mold, daylighting, good acoustics, avoiding volatile organic compounds (VOCs), ergonomic furniture, and well-maintained roofs. (EV)

Hypersonic Inlet for a Laser Powered Propulsion System

NASA Astrophysics Data System (ADS)

Harrland, Alan; Doolan, Con; Wheatley, Vincent; Froning, Dave

2011-11-01

Propulsion within the lightcraft concept is produced via laser induced detonation of an incoming hypersonic air stream. This process requires suitable engine configurations that offer good performance over all flight speeds and angles of attack to ensure the required thrust is maintained. Stream traced hypersonic inlets have demonstrated the required performance in conventional hydrocarbon fuelled scramjet engines, and has been applied to the laser powered lightcraft vehicle. This paper will outline the current methodology employed in the inlet design, with a particular focus on the performance of the lightcraft inlet at angles of attack. Fully three-dimensional turbulent computational fluid dynamics simulations have been performed on a variety of inlet configurations. The performance of the lightcraft inlets have been evaluated at differing angles of attack. An idealized laser detonation simulation has also been performed to validate that the lightcraft inlet does not unstart during the laser powered propulsion cycle.

Analysis of acute flaccid paralysis surveillance in Ethiopia, 2005-2015: progress and challenges.

PubMed

Tegegne, Ayesheshem Ademe; Fiona, Braka; Shebeshi, Meseret Eshetu; Hailemariam, Fasal Teshager; Aregay, Aron Kassahun; Beyene, Berhane; Asemahgne, Eshetu Wassie; Woyessa, Daddi Jima; Woyessa, Abyot Bekele

2017-01-01

Ethiopia joined the global effort to eradicate polio in 1996, and interrupted indigenous wild poliovirus transmission by December 2001. However, the country experienced numerous separate importations during 2003-2013. Sensitive Acute Flaccid (AFP) surveillance is critical to rule out undetected circulation of WPV and VDPVs. In this study described, we used a retrospective descriptive study design to characterize the surveillance performance from 2005 to 2015. The none-polio AFP rate improved from 2.6/100,000 children <15 years old in 2005 to 3.1 in 2015, while stool adequacy has also improved from 78.5% in 2005 to 92 % in 2015. At the national level, most AFP surveillance performance indicators are achieved and maintained over the years, however, AFP surveillance performance at sub-national level varies greatly particularly in pastoralist regions. In addition, the minimum standard for non-polio enterovirus isolation rate (10%) was not achieved except in 2007 and 2009. Nevertheless, the proportion of cases investigated within 2 days of notification and the proportion of specimens arriving in good condition within 3 days to the laboratory were maintained throughout all the years reviewed. We found that the AFP surveillance system was efficient and progressively improved over the past 10 years in Ethiopia. However, the subnational AFP surveillance performance varies and were not maintained, particularly in pastoralist regions, and the non-polio enterovirus isolation rate declined since 2010. We recommend the institution of community-based surveillance in pastoralist regions and conduct detail review of the laboratory sensitivity and the reverse cold chain system.

Analysis of acute flaccid paralysis surveillance in Ethiopia, 2005-2015: progress and challenges

PubMed Central

Tegegne, Ayesheshem Ademe; Fiona, Braka; Shebeshi, Meseret Eshetu; Hailemariam, Fasal Teshager; Aregay, Aron Kassahun; Beyene, Berhane; Asemahgne, Eshetu Wassie; Woyessa, Daddi Jima; Woyessa, Abyot Bekele

2017-01-01

Introduction Ethiopia joined the global effort to eradicate polio in 1996, and interrupted indigenous wild poliovirus transmission by December 2001. However, the country experienced numerous separate importations during 2003-2013. Sensitive Acute Flaccid (AFP) surveillance is critical to rule out undetected circulation of WPV and VDPVs. Methods In this study described, we used a retrospective descriptive study design to characterize the surveillance performance from 2005 to 2015. Results The none-polio AFP rate improved from 2.6/100,000 children <15 years old in 2005 to 3.1 in 2015, while stool adequacy has also improved from 78.5% in 2005 to 92 % in 2015. At the national level, most AFP surveillance performance indicators are achieved and maintained over the years, however, AFP surveillance performance at sub-national level varies greatly particularly in pastoralist regions. In addition, the minimum standard for non-polio enterovirus isolation rate (10%) was not achieved except in 2007 and 2009. Nevertheless, the proportion of cases investigated within 2 days of notification and the proportion of specimens arriving in good condition within 3 days to the laboratory were maintained throughout all the years reviewed. Conclusion We found that the AFP surveillance system was efficient and progressively improved over the past 10 years in Ethiopia. However, the subnational AFP surveillance performance varies and were not maintained, particularly in pastoralist regions, and the non-polio enterovirus isolation rate declined since 2010. We recommend the institution of community-based surveillance in pastoralist regions and conduct detail review of the laboratory sensitivity and the reverse cold chain system. PMID:28890751

Additive-free thick graphene film as an anode material for flexible lithium-ion batteries.

PubMed

Rana, Kuldeep; Kim, Seong Dae; Ahn, Jong-Hyun

2015-04-28

This work demonstrates a simple route to develop mechanically flexible electrodes for Li-ion batteries (LIBs) that are usable as lightweight effective conducting networks for both cathodes and anodes. Removing electrochemically dead elements, such as binders, conducting agents and metallic current collectors, from the battery components will allow remarkable progress in this area. To investigate the feasibility of using thick, additive-free graphene films as anodes for flexible LIBs, we have synthesized and tested thick, additive-free, freestanding graphene films as anodes, first in a coin cell and further in a flexible full cell. As an anode material in a half cell, it showed a discharge capacity of about 350 mA h g(-1) and maintained nearly this capacity over 50 cycles at various current rates. This film was also tested as an anode material in a full cell with a LiCoO2 cathode and showed good electrochemical performance. Because the graphene-based flexible film showed good performance in half- and full coin cells, we used this film as a flexible anode for flexible LIBs. No conducting agent or binder was used in the anode side, which helped in realizing the flexible LIBs. Using this, we demonstrate a thin, lightweight and flexible lithium ion battery with good electrochemical performance in both its flat and bent states.

The Good Work.

ERIC Educational Resources Information Center

Csikszentmihalyi, Mihaly

2003-01-01

Examines the working lives of geneticists and journalists to place into perspective what lies behind personal ethics and success. Defines "good work" as productive activity that is valued socially and loved by people engaged in it. Asserts that certain cultural values, social controls, and personal standards are necessary to maintain good work and…

Implementation of Good Laboratory Practices (GLP) in basic scientific research: Translating the concept beyond regulatory compliance.

PubMed

Jena, G B; Chavan, Sapana

2017-10-01

The principles of Good Laboratory Practices (GLPs) are mainly intended for the laboratories performing studies for regulatory compliances. However, today GLP can be applied to broad disciplines of science to cater to the needs of the experimental objectives, generation of quality data and assay reproducibility. Considering its significance, it can now be applied in academics; industries as well as government set ups throughout the world. GLP is the best way to promote the reliability, reproducibility of the test data and hence facilitates the international acceptability. Now it is high time to translate and implement the concept of GLP beyond regulatory studies. Thus, it can pave the way for better understanding of scientific problems and help to maintain a good human and environmental health. Through this review, we have made an attempt to explore the uses of GLP principles in different fields of science and its acceptability as well as looking for its future perspectives. Copyright © 2017 Elsevier Inc. All rights reserved.

Designing Process Improvement of Finished Good On Time Release and Performance Indicator Tool in Milk Industry Using Business Process Reengineering Method

NASA Astrophysics Data System (ADS)

Dachyar, M.; Christy, E.

2014-04-01

To maintain position as a major milk producer, the Indonesian milk industry should do some business development with the purpose of increasing customer service level. One strategy is to create on time release conditions for finished goods which will be distributed to customers and distributors. To achieve this condition, management information systems of finished goods on time release needs to be improved. The focus of this research is to conduct business process improvement using Business Process Reengineering (BPR). The deliverable key of this study is a comprehensive business strategy which is the solution of the root problems. To achieve the goal, evaluation, reengineering, and improvement of the ERP system are conducted. To visualize the predicted implementation, a simulation model is built by Oracle BPM. The output of this simulation showed that the proposed solution could effectively reduce the process lead time and increase the number of quality releases.

Alternatives to antibiotics for maximizing growth performance and feed efficiency in poultry: a review.

PubMed

Gadde, U; Kim, W H; Oh, S T; Lillehoj, Hyun S

2017-06-01

With the increase in regulations regarding the use of antibiotic growth promoters and the rise in consumer demand for poultry products from 'Raised Without Antibiotics' or 'No Antibiotics Ever' flocks, the quest for alternative products or approaches has intensified in recent years. A great deal of research has focused on the development of antibiotic alternatives to maintain or improve poultry health and performance. This review describes the potential for the various alternatives available to increase animal productivity and help poultry perform to their genetic potential under existing commercial conditions. The classes of alternatives described include probiotics, prebiotics, synbiotics, organic acids, enzymes, phytogenics, antimicrobial peptides, hyperimmune egg antibodies, bacteriophages, clay, and metals. A brief description of the mechanism of action, efficacy, and advantages and disadvantages of their uses are also presented. Though the beneficial effects of many of the alternatives developed have been well demonstrated, the general consensus is that these products lack consistency and the results vary greatly from farm to farm. Furthermore, their mode of action needs to be better defined. Optimal combinations of various alternatives coupled with good management and husbandry practices will be the key to maximize performance and maintain animal productivity, while we move forward with the ultimate goal of reducing antibiotic use in the animal industry.

Tracking the NOvA Detectors' Performance

NASA Astrophysics Data System (ADS)

Psihas, Fernanda; NOvA Collaboration

2016-03-01

The NOvA experiment measures long baseline νμ -->νe oscillations in Fermilab's NuMI beam. We employ two detectors equipped with over 10 thousand sets of data-taking electronics; avalanche photo diodes and front end boards which collect and process the scintillation signal from particle interactions within the detectors. These sets of electronics -as well as the systems which power and cool them- must be monitored and maintained at precise working conditions to ensure maximal data-taking uptime, good data quality and a lasting life for our detectors. This poster describes the automated systems used on NOvA to simultaneously monitor our data quality, diagnose hardware issues, track our performance and coordinate maintenance for the detectors.

Two-dimensional ultra-thin SiO(x) (0 < x < 2) nanosheets with long-term cycling stability as lithium ion battery anodes.

PubMed

Sun, Lin; Su, Tingting; Xu, Lei; Liu, Meipin; Du, Hong-Bin

2016-03-21

Ultra-thin SiO(x) (0 < x < 2) nanosheets were obtained via a convenient solvothermal route from a Zintl compound CaSi2. After carbon coating, the SiOx@C nanosheet anodes exhibit high capacity, good rate and superior cycling performance for high-capacity lithium ion battery applications. The specific capacity can be maintained as high as 760 mA h g(-1) with almost no capacity decay after 400 cycles at a current density of 0.5 A g(-1).

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Training programs at DOE facilities should prepare personnel to safely and efficiently operate and maintain the facilities in accordance with DOE requirements. This guide presents good practices for a systematic approach to on-the-job training (OJT) and OJT programs and should be used in conjunction with DOE Training Program Handbook: A Systematic Approach to Training, and with the DOE Handbook entitled Alternative Systematic Approaches to Training to develop performance-based OJT programs. DOE contractors may also use this guide to modify existing OJT programs that do not meet the systematic approach to training (SAT) objectives.

A CDMA system implementation with dimming control for visible light communication

NASA Astrophysics Data System (ADS)

Chen, Danyang; Wang, Jianping; Jin, Jianli; Lu, Huimin; Feng, Lifang

2018-04-01

Visible light communication (VLC), using solid-state lightings to transmit information, has become a complement technology to wireless radio communication. As a realistic multiple access scheme for VLC system, code division multiple access (CDMA) has attracted more and more attentions in recent years. In this paper, we address and implement an improved CDMA scheme for VLC system. The simulation results reveal that the improved CDMA scheme not only supports multi-users' transmission but also maintains dimming value at about 50% and enhances the system efficiency. It can also realize the flexible dimming control by adjusting some parameters of system structure, which rarely affects the system BER performance. A real-time experimental VLC system with improved CDMA scheme is performed based on field programmable gate array (FPGA), reaching a good BER performance.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duchaineau, M.; Wolinsky, M.; Sigeti, D.E.

Terrain visualization is a difficult problem for applications requiring accurate images of large datasets at high frame rates, such as flight simulation and ground-based aircraft testing using synthetic sensor stimulation. On current graphics hardware, the problem is to maintain dynamic, view-dependent triangle meshes and texture maps that produce good images at the required frame rate. We present an algorithm for constructing triangle meshes that optimizes flexible view-dependent error metrics, produces guaranteed error bounds, achieves specified triangle counts directly, and uses frame-to-frame coherence to operate at high frame rates for thousands of triangles per frame. Our method, dubbed Real-time Optimally Adaptingmore » Meshes (ROAM), uses two priority queues to drive split and merge operations that maintain continuous triangulations built from pre-processed bintree triangles. We introduce two additional performance optimizations: incremental triangle stripping and priority-computation deferral lists. ROAM execution time is proportionate to the number of triangle changes per frame, which is typically a few percent of the output mesh size, hence ROAM performance is insensitive to the resolution and extent of the input terrain. Dynamic terrain and simple vertex morphing are supported.« less

Optimizing ITO for incorporation into multilayer thin film stacks for visible and NIR applications

NASA Astrophysics Data System (ADS)

Roschuk, Tyler; Taddeo, David; Levita, Zachary; Morrish, Alan; Brown, Douglas

2017-05-01

Indium Tin Oxide, ITO, is the industry standard for transparent conductive coatings. As such, the common metrics for characterizing ITO performance are its transmission and conductivity/resistivity (or sheet resistance). In spite of its recurrent use in a broad range of technological applications, the performance of ITO itself is highly variable, depending on the method of deposition and chamber conditions, and a single well defined set of properties does not exist. This poses particular challenges for the incorporation of ITO in complex optical multilayer stacks while trying to maintain electronic performance. Complicating matters further, ITO suffers increased absorption losses in the NIR - making the ability to incorporate ITO into anti-reflective stacks crucial to optimizing overall optical performance when ITO is used in real world applications. In this work, we discuss the use of ITO in multilayer thin film stacks for applications from the visible to the NIR. In the NIR, we discuss methods to analyze and fine tune the film properties to account for, and minimize, losses due to absorption and to optimize the overall transmission of the multilayer stacks. The ability to obtain high transmission while maintaining good electrical properties, specifically low resistivity, is demonstrated. Trade-offs between transmission and conductivity with variation of process parameters are discussed in light of optimizing the performance of the final optical stack and not just with consideration to the ITO film itself.

Fainting

MedlinePlus

... fainted one time and you are otherwise in good health. Fainting is common and usually not serious. However, if you have serious health problems, you probably should see your doctor. This is ... your overall, good health. It helps maintain your temperature, remove waste ...

Examples of actions that improve partnering cooperation among the participants of construction projects

NASA Astrophysics Data System (ADS)

Radziszewska-Zielina, E.; Szewczyk, B.

2017-10-01

The aim of the article is to present examples of actions that can be undertaken in order to improve partnering cooperation in construction projects. These actions are a practical supplementation to the previously developed fuzzy system of controlling partnering relations in construction projects. The actions relate to 18 parameters of partnering relations that describe cooperation between a general contractor or a company that manages the project and four other participants: the contractors (subcontractors), the designer, the material and equipment suppliers and the real estate developer. The actions have been listed based on a review of subject literature, self-analysis, as well as interviews with participants of construction projects. They can provide examples of good practices that maintain partnering cooperation at a high level. Good cooperation, in turn, translates into a better performance of the project.

In vitro performance of ceramic coatings obtained by high velocity oxy-fuel spray.

PubMed

Melero, H; Garcia-Giralt, N; Fernández, J; Díez-Pérez, A; Guilemany, J M

2014-01-01

Hydroxyapatite coatings obtained by plasma-spraying have been used for many years to improve biological performance of bone implants, but several studies have drawn attention to the problems arising from high temperatures and the lack of mechanical properties. In this study, plasma-spraying is substituted by high velocity oxy-fuel (HVOF) spray, with lower temperatures reached, and TiO2 is added in low amounts to hydroxyapatite in order to improve the mechanical properties. Four conditions have been tested to evaluate which are those with better biological properties. Viability and proliferation tests, as well as differentiation assays and morphology observation, are performed with human osteoblast cultures onto the studied coatings. The hydroxyapatite-TiO2 coatings maintain good cell viability and proliferation, especially the cases with higher amorphous phase amount and specific surface, and promote excellent differentiation, with a higher ALP amount for these cases than for polystyrene controls. Observation by SEM corroborates this excellent behaviour. In conclusion, these coatings are a good alternative to those used industrially, and an interesting issue would be improving biological behaviour of the worst cases, which in turn show the better mechanical properties.

Carbon Cathodes in Rechargeable Lithium-Oxygen Batteries Based on Double-Lithium-Salt Electrolytes.

PubMed

Yoo, Eunjoo; Zhou, Haoshen

2016-06-08

The use of carbon materials as air electrodes in lithium-oxygen (Li-O2 ) batteries is known to be advantageous owing to their good conductivity and because they offer sites suitable for the reversible electrode reactions. However, the exact influence of carbon materials on the electrochemical performance of Li-O2 batteries is not clear. In this study the electrochemical performance of four different types of carbon materials (multiwalled carbon nanotubes (MWCNTs), CMK-3, graphene nanosheets (GNSs), and Ketjen Black (KB)) as air electrodes is examined. We find that a Li-O2 cell based on an electrode of multiwalled carbon nanotubes (MWCNTs) demonstrates good rate performance and cycle stability, when using LiNO3 -LiTFSI/DMSO as electrolyte. Li-O2 cells based on such MWCNT electrodes, with a cut-off capacity of 1000 mAh g(-1) at 500 mA g(-1) , can undergo around 90 cycles without obvious losses of capacity. Even when the discharge depth is increased to 2000 mA h g(-1) , stable cycling is maintained for 45 cycles at a charge potential below 4.0 V. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A knittable fiber-shaped supercapacitor based on natural cotton thread for wearable electronics

NASA Astrophysics Data System (ADS)

Zhou, Qianlong; Jia, Chunyang; Ye, Xingke; Tang, Zhonghua; Wan, Zhongquan

2016-09-01

At present, the topic of building high-performance, miniaturized and mechanically flexible energy storage modules which can be directly integrated into textile based wearable electronics is a hotspot in the wearable technology field. In this paper, we reported a highly flexible fiber-shaped electrode fabricated through a one-step convenient hydrothermal process. The prepared graphene hydrogels/multi-walled carbon nanotubes-cotton thread derived from natural cotton thread is electrochemically active and mechanically strong. Fiber-shaped supercapacitor based on the prepared fiber electrodes and polyvinyl alcohol-H3PO4 gel electrolyte exhibits good capacitive performance (97.73 μF cm-1 at scan rate of 2 mV s-1), long cycle life (95.51% capacitance retention after 8000 charge-discharge cycles) and considerable stability (90.75% capacitance retention after 500 continuous bending cycles). Due to its good mechanical and electrochemical properties, the graphene hydrogels/multi-walled carbon nanotubes-cotton thread based all-solid fiber-shaped supercapacitor can be directly knitted into fabrics and maintain its original capacitive performance. Such a low-cost textile thread based versatile energy storage device may hold great potential for future wearable electronics applications.

Controlling the opto-electronic properties of nc-SiOx:H films by promotion of 〈220〉 orientation in the growth of ultra-nanocrystallites at the grain boundary

NASA Astrophysics Data System (ADS)

Das, Debajyoti; Samanta, Subhashis

2018-01-01

A systematic development of undoped nc-SiOx:H thin films from (SiH4 + CO2) plasma diluted by a combination of H2 and He has been investigated through structural, optical and electrical characterization and correlation. Gradual inclusion of O into a highly crystalline silicon network progressively produces a two-phase structure where Si-nanocrystals (Si-nc) are embedded into the a-SiOx:H matrix. However, at the intermediate grain boundary region the growth of ultra-nanocrystallites controls the effectiveness of the material. The ultra-nanocrystallites are the part and portion of crystallinity accommodating the dominant fraction of thermodynamically preferred 〈220〉 crystallographic orientation, most favourable for stacked layer device performance. Atomic H plays a dominant role in maintaining an improved nanocrystalliny in the network even during O inclusion, while He in its excited state (He*) maintains a good energy balance at the grain boundary and produces a significant fraction of ultra-nanocrystalline component which has been demonstrated to organize the energetically favourable 〈220〉 crystallographic orientation in the network. The nc-SiOx:H films, maintaining proportionally good electrical conductivity over an wide range of optical band gap, remarkably low microstructure factor and simultaneous high crystalline volume fraction dominantly populated by ultra-nanocrystallites of 〈220〉 crystallographic orientation mostly at the grain boundary, have been obtained in technologically most popular 13.56 MHz PECVD SiH4 plasma even at a low substrate temperature ∼250 °C, convenient for device fabrication.

Neural network for image compression

NASA Astrophysics Data System (ADS)

Panchanathan, Sethuraman; Yeap, Tet H.; Pilache, B.

1992-09-01

In this paper, we propose a new scheme for image compression using neural networks. Image data compression deals with minimization of the amount of data required to represent an image while maintaining an acceptable quality. Several image compression techniques have been developed in recent years. We note that the coding performance of these techniques may be improved by employing adaptivity. Over the last few years neural network has emerged as an effective tool for solving a wide range of problems involving adaptivity and learning. A multilayer feed-forward neural network trained using the backward error propagation algorithm is used in many applications. However, this model is not suitable for image compression because of its poor coding performance. Recently, a self-organizing feature map (SOFM) algorithm has been proposed which yields a good coding performance. However, this algorithm requires a long training time because the network starts with random initial weights. In this paper we have used the backward error propagation algorithm (BEP) to quickly obtain the initial weights which are then used to speedup the training time required by the SOFM algorithm. The proposed approach (BEP-SOFM) combines the advantages of the two techniques and, hence, achieves a good coding performance in a shorter training time. Our simulation results demonstrate the potential gains using the proposed technique.

Separating live from dead longleaf pine seeds: good and bad news

Treesearch

James P. Barnett; R. Kasten Dumroese

2006-01-01

Of all southern pine seeds, longleaf pine (Pinus palutris Mill.) are the most difficult to collect, process, treat, and store while maintaining good seed quality. As a result, interest in techniques for separating filled dead from live longleaf pine seeds has developed. The good news is that new technologies are becoming available to evaluate seed...

Recurrent Neural Networks With Auxiliary Memory Units.

PubMed

Wang, Jianyong; Zhang, Lei; Guo, Quan; Yi, Zhang

2018-05-01

Memory is one of the most important mechanisms in recurrent neural networks (RNNs) learning. It plays a crucial role in practical applications, such as sequence learning. With a good memory mechanism, long term history can be fused with current information, and can thus improve RNNs learning. Developing a suitable memory mechanism is always desirable in the field of RNNs. This paper proposes a novel memory mechanism for RNNs. The main contributions of this paper are: 1) an auxiliary memory unit (AMU) is proposed, which results in a new special RNN model (AMU-RNN), separating the memory and output explicitly and 2) an efficient learning algorithm is developed by employing the technique of error flow truncation. The proposed AMU-RNN model, together with the developed learning algorithm, can learn and maintain stable memory over a long time range. This method overcomes both the learning conflict problem and gradient vanishing problem. Unlike the traditional method, which mixes the memory and output with a single neuron in a recurrent unit, the AMU provides an auxiliary memory neuron to maintain memory in particular. By separating the memory and output in a recurrent unit, the problem of learning conflicts can be eliminated easily. Moreover, by using the technique of error flow truncation, each auxiliary memory neuron ensures constant error flow during the learning process. The experiments demonstrate good performance of the proposed AMU-RNNs and the developed learning algorithm. The method exhibits quite efficient learning performance with stable convergence in the AMU-RNN learning and outperforms the state-of-the-art RNN models in sequence generation and sequence classification tasks.

Advancing Clinical Proteomics via Analysis Based on Biological Complexes: A Tale of Five Paradigms.

PubMed

Goh, Wilson Wen Bin; Wong, Limsoon

2016-09-02

Despite advances in proteomic technologies, idiosyncratic data issues, for example, incomplete coverage and inconsistency, resulting in large data holes, persist. Moreover, because of naïve reliance on statistical testing and its accompanying p values, differential protein signatures identified from such proteomics data have little diagnostic power. Thus, deploying conventional analytics on proteomics data is insufficient for identifying novel drug targets or precise yet sensitive biomarkers. Complex-based analysis is a new analytical approach that has potential to resolve these issues but requires formalization. We categorize complex-based analysis into five method classes or paradigms and propose an even-handed yet comprehensive evaluation rubric based on both simulated and real data. The first four paradigms are well represented in the literature. The fifth and newest paradigm, the network-paired (NP) paradigm, represented by a method called Extremely Small SubNET (ESSNET), dominates in precision-recall and reproducibility, maintains strong performance in small sample sizes, and sensitively detects low-abundance complexes. In contrast, the commonly used over-representation analysis (ORA) and direct-group (DG) test paradigms maintain good overall precision but have severe reproducibility issues. The other two paradigms considered here are the hit-rate and rank-based network analysis paradigms; both of these have good precision-recall and reproducibility, but they do not consider low-abundance complexes. Therefore, given its strong performance, NP/ESSNET may prove to be a useful approach for improving the analytical resolution of proteomics data. Additionally, given its stability, it may also be a powerful new approach toward functional enrichment tests, much like its ORA and DG counterparts.

Use of an elastic transarticular external fixator construct for immobilization of the elbow joint.

PubMed

Vedrine, Bertrand

2017-04-01

Transarticular external skeletal fixation usually involves rigid bars that result in a stable but stiff joint. This study describes the technique and the outcome of an elastic transarticular external fixator (ETEF) applied to the elbow joint. Four cases of elbow luxation with collateral ligament injuries were managed with closed reduction and application of an ETEF to maintain the reduction. A triceps tendon avulsion was surgically managed before applying an ETEF. The clinical outcome was considered excellent in 2 cats, good in 2 dogs (1 elbow luxation and the avulsion of the triceps tendon), and poor in 1 dog presented for elbow luxation and a permanent neurological defect. The procedure was rapid, easy to perform, and inexpensive. All animals except the one with a neurological defect had an early return to weight bearing. This method maintains extension of the joint while permitting its motion thereby promoting rehabilitation.

Use of an elastic transarticular external fixator construct for immobilization of the elbow joint

PubMed Central

Vedrine, Bertrand

2017-01-01

Transarticular external skeletal fixation usually involves rigid bars that result in a stable but stiff joint. This study describes the technique and the outcome of an elastic transarticular external fixator (ETEF) applied to the elbow joint. Four cases of elbow luxation with collateral ligament injuries were managed with closed reduction and application of an ETEF to maintain the reduction. A triceps tendon avulsion was surgically managed before applying an ETEF. The clinical outcome was considered excellent in 2 cats, good in 2 dogs (1 elbow luxation and the avulsion of the triceps tendon), and poor in 1 dog presented for elbow luxation and a permanent neurological defect. The procedure was rapid, easy to perform, and inexpensive. All animals except the one with a neurological defect had an early return to weight bearing. This method maintains extension of the joint while permitting its motion thereby promoting rehabilitation. PMID:28373726

Angular stable plates in proximal meta-epiphyseal tibial fractures: study of joint restoration and clinical and functional evaluation.

PubMed

Giannotti, S; Giovannelli, D; Dell'Osso, G; Bottai, V; Bugelli, G; Celli, F; Citarelli, C; Guido, G

2016-04-01

The tibial plateau fractures involve one of the main weight bearing joints of the human body. The goals of surgical treatment are anatomical reduction, articular surface reconstruction and high primary stability. The aim of this study was to evaluate the clinical and functional outcomes after internal plate fixation of this kind of fractures. From January 2009 to December 2012, we treated 75 cases of tibial plateau fracture with angular stable plates. We used Rasmussen Score and the Knee Society Score for the clinical and functional evaluation. Twenty-five cases that underwent hardware removal had arthroscopic and CT evaluation of the joint. No complications occurred. The clinical and functional evaluation, performed by the KSS and Rasmussen Score, highlighted the high percentage of good-to-excellent results (over 90 %). In every case, the range of motion was good with flexion >90°. Arthroscopy showed the presence of chondral damage in 100 % of patients. In all the cases, we found that X-ray images seem better than the CT images. Angular stable plates allow to obtain a good primary stability, permitting an early joint recovery with an excellent range of motion. Avoiding to perform a knee arthrotomy at the time of fracture reduction could prove to be an advantage in terms of functional recovery. The meniscus on the injured bone should be preserved in order to maintain good function of the joint. X-ray images remain the gold standard in checking the progression of post-traumatic osteoarthritis.

Design and evaluation of a hybrid storage system in HEP environment

NASA Astrophysics Data System (ADS)

Xu, Qi; Cheng, Yaodong; Chen, Gang

2017-10-01

Nowadays, the High Energy Physics experiments produce a large amount of data. These data are stored in mass storage systems which need to balance the cost, performance and manageability. In this paper, a hybrid storage system including SSDs (Solid-state Drive) and HDDs (Hard Disk Drive) is designed to accelerate data analysis and maintain a low cost. The performance of accessing files is a decisive factor for the HEP computing system. A new deployment model of Hybrid Storage System in High Energy Physics is proposed which is proved to have higher I/O performance. The detailed evaluation methods and the evaluations about SSD/HDD ratio, and the size of the logic block are also given. In all evaluations, sequential-read, sequential-write, random-read and random-write are all tested to get the comprehensive results. The results show the Hybrid Storage System has good performance in some fields such as accessing big files in HEP.

High-Performance AC Power Source by Applying Robust Stability Control Technology for Precision Material Machining

NASA Astrophysics Data System (ADS)

Chang, En-Chih

2018-02-01

This paper presents a high-performance AC power source by applying robust stability control technology for precision material machining (PMM). The proposed technology associates the benefits of finite-time convergent sliding function (FTCSF) and firefly optimization algorithm (FOA). The FTCSF maintains the robustness of conventional sliding mode, and simultaneously speeds up the convergence speed of the system state. Unfortunately, when a highly nonlinear loading is applied, the chatter will occur. The chatter results in high total harmonic distortion (THD) output voltage of AC power source, and even deteriorates the stability of PMM. The FOA is therefore used to remove the chatter, and the FTCSF still preserves finite system-state convergence time. By combining FTCSF with FOA, the AC power source of PMM can yield good steady-state and transient performance. Experimental results are performed in support of the proposed technology.

Carbon materials-functionalized tin dioxide nanoparticles toward robust, high-performance nitrogen dioxide gas sensor.

PubMed

Zhang, Rui; Liu, Xiupeng; Zhou, Tingting; Wang, Lili; Zhang, Tong

2018-08-15

Carbon (C) materials, which process excellent electrical conductivity and high carrier mobility, are promising sensing materials as active units for gas sensors. However, structural agglomeration caused by chemical processes results in a small resistance change and low sensing response. To address the above issues, structure-derived carbon-coated tin dioxide (SnO 2 ) nanoparticles having distinct core-shell morphology with a 3D net-like structure and highly uniform size are prepared by careful synthesis and fine structural design. The optimum carbon-coated SnO 2 nanoparticles (SnO 2 /C)-based gas sensor exhibits a low working temperature, excellent selectivity and fast response-recovery properties. In addition, the SnO 2 /C-based gas sensor can maintain a sensitivity to nitrogen dioxide (NO 2 ) of 3 after being cycled 4 times at 140 °C for, suggesting its good long-term stability. The structural integrity, good synergistic properties, and high gas-sensing performance of SnO 2 /C render it a promising sensing material for advanced gas sensors. Copyright © 2018 Elsevier Inc. All rights reserved.

Synergistic effects from graphene and carbon nanotubes endow ordered hierarchical structure foams with a combination of compressibility, super-elasticity and stability and potential application as pressure sensors.

PubMed

Kuang, Jun; Dai, Zhaohe; Liu, Luqi; Yang, Zhou; Jin, Ming; Zhang, Zhong

2015-01-01

Nanostructured carbon material based three-dimensional porous architectures have been increasingly developed for various applications, e.g. sensors, elastomer conductors, and energy storage devices. Maintaining architectures with good mechanical performance, including elasticity, load-bearing capacity, fatigue resistance and mechanical stability, is prerequisite for realizing these functions. Though graphene and CNT offer opportunities as nanoscale building blocks, it still remains a great challenge to achieve good mechanical performance in their microarchitectures because of the need to precisely control the structure at different scales. Herein, we fabricate a hierarchical honeycomb-like structured hybrid foam based on both graphene and CNT. The resulting materials possess excellent properties of combined high specific strength, elasticity and mechanical stability, which cannot be achieved in neat CNT and graphene foams. The improved mechanical properties are attributed to the synergistic-effect-induced highly organized, multi-scaled hierarchical architectures. Moreover, with their excellent electrical conductivity, we demonstrated that the hybrid foams could be used as pressure sensors in the fields related to artificial skin.

Optimization in the systems engineering process

NASA Technical Reports Server (NTRS)

Lemmerman, L. A.

1984-01-01

The objective is to look at optimization as it applies to the design process at a large aircraft company. The design process at Lockheed-Georgia is described. Some examples of the impact that optimization has had on that process are given, and then some areas that must be considered if optimization is to be successful and supportive in the total design process are indicated. Optimization must continue to be sold and this selling is best done by consistent good performance. For this good performance to occur, the future approaches must be clearly thought out so that the optimization methods solve the problems that actually occur during design. The visibility of the design process must be maintained as further developments are proposed. Careful attention must be given to the management of data in the optimization process, both for technical reasons and for administrative purposes. Finally, to satisfy program needs, provisions must be included to supply data to support program decisions, and to communicate with design processes outside of the optimization process. If designers fail to adequately consider all of these needs, the future acceptance of optimization will be impeded.

9 CFR 3.28 - Primary enclosures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... for guinea pigs and hamsters shall conform to the following requirements: (a) General. (1) Primary enclosures shall be structurally sound and maintained in good repair to protect the guinea pigs and hamsters... be constructed and maintained so that the guinea pigs or hamsters contained therein have convenient...

Processing of Advanced Ceramics Which Have Potential for Use in Gas Turbine Aero Engines

DTIC Science & Technology

1989-02-01

reaons . Details on the availability of these publications may be obtained from: Graphics Section, National Research Council Canada, National...have been produced by hot isostatic pressing (HIP’ing) have good potential to be used as hot section components in gas turbine aero engines. This...Alumina, for example, maintains good corrosion resistance, good stiffness, and good strength at high temperatures, but exhibits very poor thermal shock

Training and certification program of the operating staff for a 90-day test of a regenerative life support system

NASA Technical Reports Server (NTRS)

1972-01-01

Prior to beginning a 90-day test of a regenerative life support system, a need was identified for a training and certification program to qualify an operating staff for conducting the test. The staff was responsible for operating and maintaining the test facility, monitoring and ensuring crew safety, and implementing procedures to ensure effective mission performance with good data collection and analysis. The training program was designed to ensure that each operating staff member was capable of performing his assigned function and was sufficiently cross-trained to serve at certain other positions on a contingency basis. Complicating the training program were budget and schedule limitations, and the high level of sophistication of test systems.

Permeability optimization and performance evaluation of hot aerosol filters made using foam incorporated alumina suspension.

PubMed

Innocentini, Murilo D M; Rodrigues, Vanessa P; Romano, Roberto C O; Pileggi, Rafael G; Silva, Gracinda M C; Coury, José R

2009-02-15

Porous ceramic samples were prepared from aqueous foam incorporated alumina suspension for application as hot aerosol filtering membrane. The procedure for establishment of membrane features required to maintain a desired flow condition was theoretically described and experimental work was designed to prepare ceramic membranes to meet the predicted criteria. Two best membranes, thus prepared, were selected for permeability tests up to 700 degrees C and their total and fractional collection efficiencies were experimentally evaluated. Reasonably good performance was achieved at room temperature, while at 700 degrees C, increased permeability was obtained with significant reduction in collection efficiency, which was explained by a combination of thermal expansion of the structure and changes in the gas properties.

Railgun armature velocity improvement, SBIR phase 2

NASA Astrophysics Data System (ADS)

Thurmond, Leo E.; Bauer, David P.

1992-08-01

Railgun hypervelocity performance has not been repeatably demonstrated at velocities over 6 km/s. A significant performance limiting phenomena is the formation of secondary current paths in parallel with the main projectile accelerating plasma. A confined plasma armature technique was developed to prevent secondary armature formation. Confinement prevents loss of ionized material from the plasma armature and thereby prevents formation of a low rail-to-rail conductance. We controlled pressure in the confined armature via controlled venting through ports in the rails. Railgun tests with the confined armature show that sealing at the rail-confinement vessel interface is critical and difficult to achieve. Our tests show that during low seal leakage operation secondaries are prevented. However, maintaining good seal for the entire launch is very difficult.

Volunteering leads to rock-paper-scissors dynamics in a public goods game

NASA Astrophysics Data System (ADS)

Semmann, Dirk; Krambeck, Hans-Jürgen; Milinski, Manfred

2003-09-01

Collective efforts are a trademark of both insect and human societies. They are achieved through relatedness in the former and unknown mechanisms in the latter. The problem of achieving cooperation among non-kin has been described as the `tragedy of the commons', prophesying the inescapable collapse of many human enterprises. In public goods experiments, initial cooperation usually drops quickly to almost zero. It can be maintained by the opportunity to punish defectors or the need to maintain good reputation. Both schemes require that defectors are identified. Theorists propose that a simple but effective mechanism operates under full anonymity. With optional participation in the public goods game, `loners' (players who do not join the group), defectors and cooperators will coexist through rock-paper-scissors dynamics. Here we show experimentally that volunteering generates these dynamics in public goods games and that manipulating initial conditions can produce each predicted direction. If, by manipulating displayed decisions, it is pretended that defectors have the highest frequency, loners soon become most frequent, as do cooperators after loners and defectors after cooperators. On average, cooperation is perpetuated at a substantial level.

Quantitative assessment of 12-lead ECG synthesis using CAVIAR.

PubMed

Scherer, J A; Rubel, P; Fayn, J; Willems, J L

1992-01-01

The objective of this study is to assess the performance of patient-specific segment-specific (PSSS) synthesis in QRST complexes using CAVIAR, a new method of the serial comparison for electrocardiograms and vectorcardiograms. A collection of 250 multi-lead recordings from the Common Standards for Quantitative Electrocardiography (CSE) diagnostic pilot study is employed. QRS and ST-T segments are independently synthesized using the PSSS algorithm so that the mean-squared error between the original and estimated waveforms is minimized. CAVIAR compares the recorded and synthesized QRS and ST-T segments and calculates the mean-quadratic deviation as a measure of error. The results of this study indicate that estimated QRS complexes are good representatives of their recorded counterparts, and the integrity of the spatial information is maintained by the PSSS synthesis process. Analysis of the ST-T segments suggests that the deviations between recorded and synthesized waveforms are considerably greater than those associated with the QRS complexes. The poorer performance of the ST-T segments is attributed to magnitude normalization of the spatial loops, low-voltage passages, and noise interference. Using the mean-quadratic deviation and CAVIAR as methods of performance assessment, this study indicates that the PSSS-synthesis algorithm accurately maintains the signal information within the 12-lead electrocardiogram.

STS-47 PS Mohri uses Spacelab Japan microscope to study cells aboard OV-105

NASA Image and Video Library

1992-09-20

STS047-05-025 (12 - 20 Sept 1992) --- Payload specialist Mamoru Mohri, representing Japan's National Space Development Agency (NASDA), uses a microscope to produce photomicrographs of mammalian cells. The mammal cell structure experiment is one of a large number of tests that were performed during the eight-day Spacelab-J mission. On his back, Dr. Mohri totes a health monitoring experiment. The primary objective of the physiological monitoring system is to observe the health condition of the Japanese payload specialist so that good health can be maintained during and after the spaceflight.

The Guareschi Pyridine Scaffold as a Valuable Platform for the Identification of Selective PI3K Inhibitors.

PubMed

Galli, Ubaldina; Ciraolo, Elisa; Massarotti, Alberto; Margaria, Jean Piero; Sorba, Giovanni; Hirsch, Emilio; Tron, Gian Cesare

2015-09-18

A novel series of 4-aryl-3-cyano-2-(3-hydroxyphenyl)-6-morpholino-pyridines have been designed as potential phosphatidylinositol-3-kinase (PI3K) inhibitors. The compounds have been synthesized using the Guareschi reaction to prepare the key 4-aryl-3-cyano-2,6-dihydroxypyridine intermediate. A different selectivity according to the nature of the aryl group has been observed. Compound 9b is a selective inhibitor against the PI3Kα isoform, maintaining a good inhibitory activity. Docking studies were also performed in order to rationalize its profile of selectivity.

The serial message-passing schedule for LDPC decoding algorithms

NASA Astrophysics Data System (ADS)

Liu, Mingshan; Liu, Shanshan; Zhou, Yuan; Jiang, Xue

2015-12-01

The conventional message-passing schedule for LDPC decoding algorithms is the so-called flooding schedule. It has the disadvantage that the updated messages cannot be used until next iteration, thus reducing the convergence speed . In this case, the Layered Decoding algorithm (LBP) based on serial message-passing schedule is proposed. In this paper the decoding principle of LBP algorithm is briefly introduced, and then proposed its two improved algorithms, the grouped serial decoding algorithm (Grouped LBP) and the semi-serial decoding algorithm .They can improve LBP algorithm's decoding speed while maintaining a good decoding performance.

SHared Aperture Diffractive Optical Elements

NASA Technical Reports Server (NTRS)

Rallison, Richard D.; Pearson, Elroy

2004-01-01

All prototypes that can be delivered have been delivered and the quality of the 5 plex copies is good in spot aberration and size, in Bragg angle and in crosstalk but lacks required efficiency because of excessive scatter recorded in the master. The final 4 months of this contract were performed when conditions in the lab were too harsh to complete the extremely long exposures required while maintaining sufficient thermal stability. An improved master HOE will be shot and delivered when the weather is better. It will be a post contract activity at no extra charge to NASA made necessary by bad weather.

A scalable and practical one-pass clustering algorithm for recommender system

NASA Astrophysics Data System (ADS)

Khalid, Asra; Ghazanfar, Mustansar Ali; Azam, Awais; Alahmari, Saad Ali

2015-12-01

KMeans clustering-based recommendation algorithms have been proposed claiming to increase the scalability of recommender systems. One potential drawback of these algorithms is that they perform training offline and hence cannot accommodate the incremental updates with the arrival of new data, making them unsuitable for the dynamic environments. From this line of research, a new clustering algorithm called One-Pass is proposed, which is a simple, fast, and accurate. We show empirically that the proposed algorithm outperforms K-Means in terms of recommendation and training time while maintaining a good level of accuracy.

Employee Health Behaviors, Self-Reported Health Status, and Association With Absenteeism: Comparison With the General Population.

PubMed

Yun, Young Ho; Sim, Jin Ah; Park, Eun-Gee; Park, June Dong; Noh, Dong-Young

2016-09-01

To perform a comparison between health behaviors and health status of employees with those of the general population, to evaluate the association between employee health behaviors, health status, and absenteeism. Cross-sectional study enrolled 2433 employees from 16 Korean companies in 2014, and recruited 1000 general population randomly in 2012. The distribution of employee health behaviors, health status, and association with absenteeism were assessed. Employees had significantly worse health status and low rates of health behaviors maintenance compared with the general population. Multiple logistic regression model revealed that regular exercise, smoking cessation, work life balance, proactive living, religious practice, and good physical health status were associated with lower absenteeism. Maintaining health behaviors and having good health status were associated with less absenteeism. This study suggests investment of multidimensional health approach in workplace health and wellness (WHW) programs.

A hybrid of MnO2 nanowires and MWCNTs as cathode of excellent rate capability for supercapacitors

NASA Astrophysics Data System (ADS)

Tang, W.; Hou, Y. Y.; Wang, X. J.; Bai, Y.; Zhu, Y. S.; Sun, H.; Yue, Y. B.; Wu, Y. P.; Zhu, K.; Holze, R.

2012-01-01

A hybrid of MnO2-nanowires and MWCNTs to be used as cathode in a supercapacitor with good electrochemical performance was prepared by a facile hydrothermal method. In this hybrid the α-MnO2 nanowires are well entangled with MWCNTs. The MWCNTs provide a network for fast electron transport whereas MnO2 nanowires show a fast redox response. Since gain/loss of both electrons and ions can be realized very rapidly at the same time, the hybrid has an excellent rate capability and delivers an energy density of 17.8 Wh kg-1 at 400 W kg-1, which is maintained almost constant even at 3340 W kg-1 in 0.5 M Li2SO4 aqueous electrolyte. The cycling behavior is very good even in the presence of oxygen. The data present great promise for the hybrid as a practical cathode material for aqueous supercapacitor.

Palliative management of pressure ulcers and malignant wounds in patients with advanced illness.

PubMed

McDonald, Amy; Lesage, Pauline

2006-04-01

Pressure ulcers and malignant wounds are prevalent in populations with advanced illness. In these populations, the goals of care may shift from a primary focus on healing to a focus on wound management, palliation and comfort. Many complications associated with these wounds must be palliated. This review explores the palliative approach to managing pressure ulcers and malignant wounds in patients with advanced illness. A comprehensive search of MEDLINE, CINAHL, and Cochrane Databases for articles addressing wound management and palliation was performed. We also reviewed online wound care resources and textbooks related to the field. The key to good wound care is prevention if possible, ongoing wound assessment, correct choice of dressing and use of available adjuvant therapies. The ultimate goals of palliative wound care are to control pain, to manage infection, odor, bleeding, and exudate, and to maintain a good quality of life for the patient and caregiver.

Roll-to-Roll Manufacturing of Robust Superhydrophobic Coating on Metallic Engineering Materials.

PubMed

Dong, Shuliang; Wang, Zhenlong; Wang, Yukui; Bai, Xuelin; Fu, Yong Qing; Guo, Bin; Tan, Chaoliang; Zhang, Jia; Hu, PingAn

2018-01-17

Creating a robust superhydrophobic surface on the conventional engineering materials at mass production is of great importance for a self-cleaning, anti-icing, nonwetting surface and low flow resistance in industrial applications. Herein, we report a roll-to-roll strategy to create durable and robust superhydrophobic surfaces with designed micro-/nanoscale hierarchical structures on many conventional engineering materials by combining electrical discharge machining and coating of carbon nanoparticles, followed by oil penetration and drying. The treated surface shows good superhydrophobic properties with a static water contact angle of 170 ± 2° and slide angle of 3 ± 1°. The treated surface also exhibits good resilience and maintains the performance after being tested in various harsh conditions, including water flushing for several days, sand abrasion, scratching with sandpapers, and corrosive solution. Significantly, the superhydrophobic surfaces also show a high efficiency of self-cleaning properties even after oil contamination during applications.

Guidelines on Good Clinical Laboratory Practice

PubMed Central

Ezzelle, J.; Rodriguez-Chavez, I. R.; Darden, J. M.; Stirewalt, M.; Kunwar, N.; Hitchcock, R.; Walter, T.; D’Souza, M. P.

2008-01-01

A set of Good Clinical Laboratory Practice (GCLP) standards that embraces both the research and clinical aspects of GLP were developed utilizing a variety of collected regulatory and guidance material. We describe eleven core elements that constitute the GCLP standards with the objective of filling a gap for laboratory guidance, based on IND sponsor requirements, for conducting laboratory testing using specimens from human clinical trials. These GCLP standards provide guidance on implementing GLP requirements that are critical for laboratory operations, such as performance of protocol-mandated safety assays, peripheral blood mononuclear cell processing and immunological or endpoint assays from biological interventions on IND-registered clinical trials. The expectation is that compliance with the GCLP standards, monitored annually by external audits, will allow research and development laboratories to maintain data integrity and to provide immunogenicity, safety, and product efficacy data that is repeatable, reliable, auditable and that can be easily reconstructed in a research setting. PMID:18037599

Looking good or doing good? Motivations for organisational citizenship behaviour in Turkish versus South Korean collectivists.

PubMed

Alabak, Merve; Peker, Müjde; Booth, Robert W

2016-06-01

The purpose of this article is to explore potential motivations to perform organisational citizenship behaviour (OCB) in collectivistic Turkish and South Korean societies. Although collectivism has been proposed as a predictor of OCB, previous research has not fully explored the possibility that collectivistic individuals' OCB may result from their self-oriented motives (i.e. social desirability concerns) or their future-oriented motives (i.e. long-term orientation concerns). We predicted that OCB stems from social desirability concerns among Turkish collectivists, meaning it is used for maintaining a positive image within the organisation. However, for South Korean collectivists, we predicted that OCB stems from their long-term orientation concerns, meaning it is used to make the organisation better. The results were in line with our predictions, and the findings are discussed in terms of their implications for firms in collectivistic societies. © 2015 International Union of Psychological Science.

Reciprocity and the Tragedies of Maintaining and Providing the Commons.

PubMed

Gächter, Simon; Kölle, Felix; Quercia, Simone

2017-09-01

Social cooperation often requires collectively beneficial but individually costly restraint to maintain a public good1-4, or it needs costly generosity to create one1,5. Status quo effects6 predict that maintaining a public good is easier than providing a new one. Here we show experimentally and with simulations that even under identical incentives, low levels of cooperation (the 'tragedy of the commons'2) are systematically more likely in Maintenance than Provision. Across three series of experiments, we find that strong and weak positive reciprocity, known to be fundamental tendencies underpinning human cooperation7-10, are substantially diminished under Maintenance compared to Provision. As we show in a fourth experiment, the opposite holds for negative reciprocity ('punishment'). Our findings suggest that incentives to avoid the 'tragedy of the commons' need to contend with dilemma-specific reciprocity.

Structure and performance of anisotropic nanocrystalline Nd-Fe-B magnets fabricated by high-velocity compaction followed by deformation

NASA Astrophysics Data System (ADS)

Zhao, L. Z.; Deng, X. X.; Yu, H. Y.; Guan, H. J.; Li, X. Q.; Xiao, Z. Y.; Liu, Z. W.; Greneche, J. M.

2017-12-01

High-velocity compaction (HVC) has been proposed as an effective approach for the fabrication of nanocrystalline Nd-Fe-B magnets. In this work, the effect of powder size on the density of HVCed magnets has been studied and the anisotropic nanocrystalline Nd-Fe-B magnets were prepared by HVC followed by hot deformation (HD). It is found that a proper particle size range is beneficial to high density. The investigations on the microstructure, magnetic domain structure, and hyperfine structure, indicate that the deformed grain structure and the magnetic domain structure with uniform paramagnetic grain boundary phase give good magnetic properties of HVC + HDed magnets. These magnets also have good mechanical and anti-corrosion properties. The results indicate that HVC is not only a near-net-shape, room temperature and binder-free process but is also able to maintain uniform nanostructure and to achieve good magnetic properties in both isotropic and anisotropic magnets. As a result, HVC can be employed as an ideal alternative process for bonding or hot pressing for the conventional MQI, MQII and MQIII magnets.

40 CFR 1066.105 - Ambient controls and vehicle cooling fans.

Code of Federal Regulations, 2014 CFR

2014-07-01

... range of ambient temperature and humidity. Use good engineering judgment to maintain relatively uniform temperatures throughout the test cell before testing. You are generally not required to maintain uniform temperatures throughout the test cell while the vehicle is running due to the heat generated by the vehicle...

7 CFR 51.56 - Buildings and structures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... waste disposal and plumbing system maintained in good repair; (d) Each room in which the product is graded or stored shall be designed and constructed as to insure operating conditions of a clean and orderly character and shall be maintained in a clean and sanitary manner; and, (e) Every practical...

7 CFR 51.56 - Buildings and structures.

Code of Federal Regulations, 2011 CFR

2011-01-01

... waste disposal and plumbing system maintained in good repair; (d) Each room in which the product is graded or stored shall be designed and constructed as to insure operating conditions of a clean and orderly character and shall be maintained in a clean and sanitary manner; and, (e) Every practical...

24 CFR 904.107 - Responsibilities of homebuyer.

Code of Federal Regulations, 2011 CFR

2011-04-01

... maintaining the common areas and property, including fixtures and equipment, in good condition and appearance... includes the work (labor and materials) of keeping the dwelling structure, grounds and equipment in good... common areas and property. (d) Inspections. A homebuyer shall agree to permit officials, employees, or...

Gifted Students and Sleep

ERIC Educational Resources Information Center

Harsh, John; Karnes, Frances; Eiers, Patrick

2012-01-01

In this article, the authors emphasize that good sleep health is essential if gifted children are to gain the greatest benefit from opportunities to grow intellectually, socially, and spiritually while maintaining good psychological and physical health. The outstanding abilities that characterize these children and enable high levels of…

Sustainable cooperation based on reputation and habituation in the public goods game.

PubMed

Liu, Yan; Chen, Tong

2017-10-01

Reputation can promote cooperation in public goods game and player's cooperative behavior is not pure economical rationality, but habituation would influence their behaviors as well. One's habituation can be formed by repeated behaviors in daily life and be affected by habitual preference. We aim to investigate the sustainable cooperation based on reputation and habit formation. To better investigate the impacts of reputation and habitual preference on the evolution and sustainability of cooperation. We introduce three types of agents into our spatial public goods game. Through numerical simulations, we find that the larger habitual preference make cooperation easier to emerge and maintain. Additionally, we find that a moderate number of agents who want to obtain more reputation (ICs) are best for the sustainability of cooperation. Finally, we observe that the variation of donations of ICs can influence greatly on the equilibrium of public goods game. When ICs reduce their donations, a proper contribution will be better to maintain the cooperative behaviors. Copyright © 2017 Elsevier B.V. All rights reserved.

The key actors maintaining elders in functional autonomy in Bobo-Dioulasso (Burkina Faso)

PubMed Central

2014-01-01

Background Globally, a significant increase in functional disability among the elderly is expected in the near future. It is therefore vital to begin considering how Sub-Saharan Africa countries can best start building or strengthening the care and support system for that target population. Study objectives are: 1) identify the key actors of the social system who maintain elders in functional autonomy at home in Bobo-Dioulasso (Burkina Faso) and 2) to describe the functional status of older people living at home. Methods We conducted a longitudinal descriptive study among the elderly aged 60 and above (351). Their functional status was evaluated using the Functional Autonomy Measurement System (SMAF). Data analysis was done using the statistical software package STATA (SE11). Results In Bobo-Dioulasso, 68% of seniors have good functional capacity or a slight incapacity and 32% have moderate to severe incapacities. Older people die before (3%) or during (14%) moderate to severe disabilities. This would mean that the quality of medical and/or social care is not good for maintaining functional autonomy of older people with moderate to severe disabilities. Two main groups of people contribute to maintain elders in functional autonomy: the elderly themselves and their family. Community, private or public structures for maintaining elders in functional autonomy are non-existent. The social system for maintaining elders in functional autonomy is incomplete and failing. In case of functional handicap at home, the elders die. But stakeholders are not conscious of this situation; they believe that this system is good for maintaining elders in functional autonomy. Conclusion It is likely that the absence of formal care and support structure likely shortens the lifespan of severely disabled older people. Stakeholders have not yet looked at this possibility. The stakeholders should seriously think about: 1) how to establish the third level of actors who can fulfill the needs to maintain elders in functional autonomy that are not satisfied by others (family members or the older individuals themselves), and 2) how to reinforce the role of each actor and the collaboration between the different groups of people of this system. PMID:24997509

Design Recovery for Software Library Population

DTIC Science & Technology

1992-12-01

increase understandability, efficiency, and maintainability of the software and the design. A good representation choice will also aid in...required for a reengineering project. It details the analysis and planning phase and gives good criteria for determining the need for a reengineering...because it deals with all of these issues. With his complete description of the analysis and planning phase, Byrne has a good foundation for

Randomised clinical trial: a herbal preparation of myrrh, chamomile and coffee charcoal compared with mesalazine in maintaining remission in ulcerative colitis--a double-blind, double-dummy study.

PubMed

Langhorst, J; Varnhagen, I; Schneider, S B; Albrecht, U; Rueffer, A; Stange, R; Michalsen, A; Dobos, G J

2013-09-01

The herbal treatment with myrrh, dry extract of chamomile flowers and coffee charcoal has anti-inflammatory and antidiarrhoeal potential and might benefit patients with UC. Aminosalicylates are used as standard treatment for maintaining remission in ulcerative colitis (UC). To compare the efficacy of the two treatments in maintaining remission in patients with ulcerative colitis. We performed a randomised, double-blind, double-dummy study over a 12-month period in patients with UC. Primary endpoint was non-inferiority of the herbal preparation as defined by mean Clinical Colitis Activity Index (CAI-Rachmilewitz). Secondary endpoints were relapse rates, safety profile, relapse-free times, endoscopic activity and faecal biomarkers. A total of 96 patients (51 female) with inactive UC were included. Mean CAI demonstrated no significant difference between the two treatment groups in the intention-to-treat (P = 0.121) or per-protocol (P = 0.251) analysis. Relapse rates in total were 22/49 patients (45%) in the mesalazine treatment group and 25/47 patients (53%) in the herbal treatment group (P = 0.540). Safety profile and tolerability were good and no significant differences were shown in relapse-free time, endoscopy and faecal biomarkers. The herbal preparation of myrrh, chamomile extract and coffee charcoal is well tolerated and shows a good safety profile. We found first evidence for a potential efficacy non-inferior to the gold standard therapy mesalazine, which merits further study of its clinical usefulness in maintenance therapy of patients with ulcerative colitis. EudraCT-Number 2007-007928-18. © 2013 John Wiley & Sons Ltd.

Optical performance of multifocal soft contact lenses via a single-pass method.

PubMed

Bakaraju, Ravi C; Ehrmann, Klaus; Falk, Darrin; Ho, Arthur; Papas, Eric

2012-08-01

A physical model eye capable of carrying soft contact lenses (CLs) was used as a platform to evaluate optical performance of several commercial multifocals (MFCLs) with high- and low-add powers and a single-vision control. Optical performance was evaluated at three pupil sizes, six target vergences, and five CL-correcting positions using a spatially filtered monochromatic (632.8 nm) light source. The various target vergences were achieved by using negative trial lenses. A photosensor in the retinal plane recorded the image point-spread that enabled the computation of visual Strehl ratios. The centration of CLs was monitored by an additional integrated en face camera. Hydration of the correcting lens was maintained using a humidity chamber and repeated instillations of rewetting saline drops. All the MFCLs reduced performance for distance but considerably improved performance along the range of distance to near target vergences, relative to the single-vision CL. Performance was dependent on add power, design, pupil, and centration of the correcting CLs. Proclear (D) design produced good performance for intermediate vision, whereas Proclear (N) design performed well at near vision (p < 0.05). AirOptix design exhibited good performance for distance and intermediate vision. PureVision design showed improved performance across the test vergences, but only for pupils ≥4 mm in diameter. Performance of Acuvue bifocal was comparable with other MFCLs, but only for pupils >4 mm in diameter. Acuvue Oasys bifocal produced performance comparable with single-vision CL for most vergences. Direct measurement of single-pass images at the retinal plane of a physical model eye used in conjunction with various MFCLs is demonstrated. This method may have utility in evaluating the relative effectiveness of commercial and prototype designs.

A Spatially-Explicit Technique for Evaluation of Alternative Scenarios in the Context of Ecosystem Goods and Services

EPA Science Inventory

Ecosystems contribute to maintaining human well-being directly through provision of goods and indirectly through provision of services that support clean water, clean air, flood protection and atmospheric stability. Transparently accounting for biophysical attributes from which h...

Chemically durable polymer electrolytes for solid-state alkaline water electrolysis

NASA Astrophysics Data System (ADS)

Park, Eun Joo; Capuano, Christopher B.; Ayers, Katherine E.; Bae, Chulsung

2018-01-01

Generation of high purity hydrogen using electrochemical splitting of water is one of the most promising methods for sustainable fuel production. The materials to be used as solid-state electrolytes for alkaline water electrolyzer require high thermochemical stability against hydroxide ion attack in alkaline environment during the operation of electrolysis. In this study, two quaternary ammonium-tethered aromatic polymers were synthesized and investigated for anion exchange membrane (AEM)-based alkaline water electrolyzer. The membranes properties including ion exchange capacity (IEC), water uptake, swelling degree, and anion conductivity were studied. The membranes composed of all C-C bond polymer backbones and flexible side chain terminated by cation head groups exhibited remarkably good chemical stability by maintaining structural integrity in 1 M NaOH solution at 95 °C for 60 days. Initial electrochemical performance and steady-state operation performance were evaluated, and both membranes showed a good stabilization of the cell voltage during the steady-state operation at the constant current density at 200 mA/cm2. Although both membranes in current form require improvement in mechanical stability to afford better durability in electrolysis operation, the next generation AEMs based on this report could lead to potentially viable AEM candidates which can provide high electrolysis performance under alkaline operating condition.

Few-layered Ni(OH)2 nanosheets for high-performance supercapacitors

NASA Astrophysics Data System (ADS)

Sun, Wenping; Rui, Xianhong; Ulaganathan, Mani; Madhavi, Srinivasan; Yan, Qingyu

2015-11-01

Few-layered Ni(OH)2 nanosheets (4-5 nm in thickness) are synthesized towards high-performance supercapacitors. The ultrathin Ni(OH)2 nanosheets show high specific capacitance and good rate capability in both three-electrode and asymmetric devices. In the three-electrode device, the Ni(OH)2 nanosheets deliver a high capacitance of 2064 F g-1 at 2 A g-1, and the capacitance still has a retention of 1837 F g-1 at a high current density of 20 A g-1. Such excellent performance is by far one of the best for Ni(OH)2 electrodes. In the two-electrode asymmetric device, the specific capacitance is 248 F g-1 at 1 A g-1, and reaches 113 F g-1 at 20 A g-1. The capacitance of the asymmetric device maintains to be 166 F g-1 during the 4000th cycle at 2 A g-1, suggesting good cycling stability of the device. Besides, the asymmetric device exhibits gravimetric energy density of 22 Wh kg-1 at a power density of 0.8 kW kg-1. The present results demonstrate that the ultrathin Ni(OH)2 nanosheets are highly attractive electrode materials for achieving fast charging/discharging and high-capacity supercapacitors.

External quality assessment for EGFR mutations in Italy: improvements in performances over the time.

PubMed

Normanno, Nicola; Fenizia, Francesca; Castiglione, Francesca; Barberis, Massimo; Taddei, Gian Luigi; Truini, Mauro; De Rosa, Gaetano; Pinto, Carmine; Marchetti, Antonio

2017-01-01

External quality assessment (EQA) schemes are essential procedures to assess the quality level of laboratories performing molecular testing of the epidermal growth factor receptor ( EGFR ) gene in non-small cell lung cancer. The Italian Association of Medical Oncology (AIOM) and the Italian Society of Pathology (SIAPEC-IAP) organise EGFR EQA programmes to ensure that the Italian laboratories achieve the quality standard levels required. Comparing the 2011, 2013 and 2015 EGFR EQA schemes, it was possible to observe improvements in the methodologies used and the outcomes. The use of direct sequencing was reduced from 78.7% in 2011 to only 14.1% in 2015, whereas the use of pyrosequencing and real-time PCR increased. The number of rounds in which centres using direct sequencing failed was significantly higher than the number of rounds that failed using other methods, both when analysing each single scheme and when combining the three EQAs together. In 2011 and 2013, about 29% of the participants failed the first phase of the programmes, compared with the 13% of centres failing in 2015, suggesting that the switch to more sensitive and robust methods could allow to increase the percentage of good performers. Although the molecular analyses are performed with good quality in Italy, the continuous education carried out by AIOM and SIAPEC-IAP remains a fundamental tool to maintain this quality level.

External quality assessment for EGFR mutations in Italy: improvements in performances over the time

PubMed Central

Normanno, Nicola; Fenizia, Francesca; Castiglione, Francesca; Barberis, Massimo; Taddei, Gian Luigi; Truini, Mauro; De Rosa, Gaetano; Pinto, Carmine; Marchetti, Antonio

2017-01-01

External quality assessment (EQA) schemes are essential procedures to assess the quality level of laboratories performing molecular testing of the epidermal growth factor receptor (EGFR) gene in non-small cell lung cancer. The Italian Association of Medical Oncology (AIOM) and the Italian Society of Pathology (SIAPEC-IAP) organise EGFR EQA programmes to ensure that the Italian laboratories achieve the quality standard levels required. Comparing the 2011, 2013 and 2015 EGFR EQA schemes, it was possible to observe improvements in the methodologies used and the outcomes. The use of direct sequencing was reduced from 78.7% in 2011 to only 14.1% in 2015, whereas the use of pyrosequencing and real-time PCR increased. The number of rounds in which centres using direct sequencing failed was significantly higher than the number of rounds that failed using other methods, both when analysing each single scheme and when combining the three EQAs together. In 2011 and 2013, about 29% of the participants failed the first phase of the programmes, compared with the 13% of centres failing in 2015, suggesting that the switch to more sensitive and robust methods could allow to increase the percentage of good performers. Although the molecular analyses are performed with good quality in Italy, the continuous education carried out by AIOM and SIAPEC-IAP remains a fundamental tool to maintain this quality level. PMID:29181190

Patients' experiences of physical limitations in daily life activities when suffering from chronic heart failure; a phenomenographic analysis.

PubMed

Pihl, Emma; Fridlund, Bengt; Mårtensson, Jan

2011-03-01

The aim of the study was to describe how patients suffering from chronic heart failure conceived their physical limitations in daily life activities. An explorative and qualitative design with a phenomenographic approach was chosen, a total of 15 patients were interviewed. The findings indicate that participants perceived a variety of structural aspects pertaining to physical limitations in activities of daily life which resulted in four referential aspects. Need of finding practical solutions in daily life focused on how life had to be changed and other ways of performing activities of daily life had to be invented. Having realistic expectations about the future was characterised by belief that the future itself would be marked by change in physical functioning, but an incentive to maintain functions and activities ensured good quality of or even increased capacity in daily life. Not believing in one's own ability included the perception of having no opportunity to improve ability to perform activities of daily life. There were perceptions of undesired passivity, undefined fear of straining themselves or performing activities that could endanger their health in addition to uncertainty about the future. In Losing one's social role in daily life, participants described losing their social network and their position in society and family because of limited physical capacity. A lack of important issues, mental and physical, occurred when physical capacity was lost. In conclusion, patients suffering from chronic heart failure found new solutions to manage activities in daily life, including willingness to change focus and identify other ways of doing important things. Patients had an incentive to maintain functions and activities to ensure a good quality of and strengthen their physical capacity in daily life. Inability to trust in their physical capacity in combination with experienced limitations in daily life prevented patients from attempting to increase activities. © 2010 The Authors. Scandinavian Journal of Caring Sciences © 2010 Nordic College of Caring Science.

Reciprocity and the Tragedies of Maintaining and Providing the Commons

PubMed Central

Gächter, Simon; Kölle, Felix; Quercia, Simone

2017-01-01

Social cooperation often requires collectively beneficial but individually costly restraint to maintain a public good1–4, or it needs costly generosity to create one1,5. Status quo effects6 predict that maintaining a public good is easier than providing a new one. Here we show experimentally and with simulations that even under identical incentives, low levels of cooperation (the ‘tragedy of the commons’2) are systematically more likely in Maintenance than Provision. Across three series of experiments, we find that strong and weak positive reciprocity, known to be fundamental tendencies underpinning human cooperation7–10, are substantially diminished under Maintenance compared to Provision. As we show in a fourth experiment, the opposite holds for negative reciprocity (‘punishment’). Our findings suggest that incentives to avoid the ‘tragedy of the commons’ need to contend with dilemma-specific reciprocity. PMID:28944297

Challenges of Maintaining Good Clinical Laboratory Practices in Low-Resource Settings:  A Health Program Evaluation Framework Case Study From East Africa.

PubMed

Zhang, Helen L; Omondi, Michael W; Musyoka, Augustine M; Afwamba, Isaac A; Swai, Remigi P; Karia, Francis P; Muiruri, Charles; Reddy, Elizabeth A; Crump, John A; Rubach, Matthew P

2016-08-01

Using a clinical research laboratory as a case study, we sought to characterize barriers to maintaining Good Clinical Laboratory Practice (GCLP) services in a developing world setting. Using a US Centers for Disease Control and Prevention framework for program evaluation in public health, we performed an evaluation of the Kilimanjaro Christian Medical Centre-Duke University Health Collaboration clinical research laboratory sections of the Kilimanjaro Clinical Research Institute in Moshi, Tanzania. Laboratory records from November 2012 through October 2014 were reviewed for this analysis. During the 2-year period of study, seven instrument malfunctions suspended testing required for open clinical trials. A median (range) of 9 (1-55) days elapsed between instrument malfunction and biomedical engineer service. Sixteen (76.1%) of 21 suppliers of reagents, controls, and consumables were based outside Tanzania. Test throughput among laboratory sections used a median (range) of 0.6% (0.2%-2.7%) of instrument capacity. Five (55.6%) of nine laboratory technologists left their posts over 2 years. These findings demonstrate that GCLP laboratory service provision in this setting is hampered by delays in biomedical engineer support, delays and extra costs in commodity procurement, low testing throughput, and high personnel turnover. © American Society for Clinical Pathology, 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Pigeons can discriminate "good" and "bad" paintings by children.

PubMed

Watanabe, Shigeru

2010-01-01

Humans have the unique ability to create art, but non-human animals may be able to discriminate "good" art from "bad" art. In this study, I investigated whether pigeons could be trained to discriminate between paintings that had been judged by humans as either "bad" or "good". To do this, adult human observers first classified several children's paintings as either "good" (beautiful) or "bad" (ugly). Using operant conditioning procedures, pigeons were then reinforced for pecking at "good" paintings. After the pigeons learned the discrimination task, they were presented with novel pictures of both "good" and "bad" children's paintings to test whether they had successfully learned to discriminate between these two stimulus categories. The results showed that pigeons could discriminate novel "good" and "bad" paintings. Then, to determine which cues the subjects used for the discrimination, I conducted tests of the stimuli when the paintings were of reduced size or grayscale. In addition, I tested their ability to discriminate when the painting stimuli were mosaic and partial occluded. The pigeons maintained discrimination performance when the paintings were reduced in size. However, discrimination performance decreased when stimuli were presented as grayscale images or when a mosaic effect was applied to the original stimuli in order to disrupt spatial frequency. Thus, the pigeons used both color and pattern cues for their discrimination. The partial occlusion did not disrupt the discriminative behavior suggesting that the pigeons did not attend to particular parts, namely upper, lower, left or right half, of the paintings. These results suggest that the pigeons are capable of learning the concept of a stimulus class that humans name "good" pictures. The second experiment showed that pigeons learned to discriminate watercolor paintings from pastel paintings. The subjects showed generalization to novel paintings. Then, as the first experiment, size reduction test, grayscale test, mosaic processing test and partial occlusion test were carried out. The results suggest that the pigeons used both color and pattern cues for the discrimination and show that non-human animals, such as pigeons, can be trained to discriminate abstract visual stimuli, such as pictures and may also have the ability to learn the concept of "beauty" as defined by humans.

Assessing and managing rangeland and enterprise resilience using the integrated grazingland assessment method

USDA-ARS?s Scientific Manuscript database

Resilient shifts into undesirable natural States (as described in State-and-Transition models) opens up opportunities for using agronomic practices to maintain the function of rangeland ecosystems as well as maintaining the provisioning of goods and services from these areas. There is a need for a m...

7 CFR 51.56 - Buildings and structures.

Code of Federal Regulations, 2013 CFR

2013-01-01

... be an efficient waste disposal and plumbing system maintained in good repair; (d) Each room in which... a clean and orderly character and shall be maintained in a clean and sanitary manner; and, (e) Every practical precaution shall be taken to exclude dogs, cats, rodents and other vermin from the rooms in which...

7 CFR 51.56 - Buildings and structures.

Code of Federal Regulations, 2014 CFR

2014-01-01

... be an efficient waste disposal and plumbing system maintained in good repair; (d) Each room in which... a clean and orderly character and shall be maintained in a clean and sanitary manner; and, (e) Every practical precaution shall be taken to exclude dogs, cats, rodents and other vermin from the rooms in which...

[Maintaining patients' autonomy at home].

PubMed

Niang, Bénédicte; Coudre, Jean Pierre

2015-01-01

To maintain the flow of hospital discharges, the patient's return home with support from a home nursing service is important. If any difficulties are identified, there are various programmes or good practices which can be put into place. The future law on adapting society to ageing also comprises a scheme combining home assistance and nursing care.

Aquarius L-Band Microwave Radiometer: Three Years of Radiometric Performance and Systematic Effects

NASA Technical Reports Server (NTRS)

Piepmeier, Jeffrey R.; Hong, Liang; Pellerano, Fernando A.

2015-01-01

The Aquarius L-band microwave radiometer is a three-beam pushbroom instrument designed to measure sea surface salinity. Results are analyzed for performance and systematic effects over three years of operation. The thermal control system maintains tight temperature stability promoting good gain stability. The gain spectrum exhibits expected orbital variations with 1f noise appearing at longer time periods. The on-board detection and integration scheme coupled with the calibration algorithm produce antenna temperatures with NEDT 0.16 K for 1.44-s samples. Nonlinearity is characterized before launch and the derived correction is verified with cold-sky calibration data. Finally, long-term drift is discovered in all channels with 1-K amplitude and 100-day time constant. Nonetheless, it is adeptly corrected using an exponential model.

76 FR 68819 - State of Good Repair Bus and Bus Facilities Discretionary Program Funds

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-07

... that are public agencies, private companies engaged in public transportation, or private non-profit... Table 1 will provide funds to help maintain the nation's public transportation bus fleet, infrastructure... DEPARTMENT OF TRANSPORTATION Federal Transit Administration State of Good Repair Bus and Bus...

Creating "Good Citizens" and Maintaining Religious Harmony in Singapore

ERIC Educational Resources Information Center

Tan, Charlene

2008-01-01

This article discusses how the concept of "good citizens" in Singapore is linked to the principle of harmony, characterised by collectivism and a strong interventionist government. The value of religious harmony is actively promoted by the Singapore government and supported by the religious leaders. This article argues that the principle…

Good ergonomics and team diversity reduce absenteeism and errors in car manufacturing.

PubMed

Fritzsche, Lars; Wegge, Jürgen; Schmauder, Martin; Kliegel, Matthias; Schmidt, Klaus-Helmut

2014-01-01

Prior research suggests that ergonomics work design and mixed teams (in age and gender) may compensate declines in certain abilities of ageing employees. This study investigates simultaneous effects of both team level factors on absenteeism and performance (error rates) over one year in a sample of 56 car assembly teams (N = 623). Results show that age was related to prolonged absenteeism and more mistakes in work planning, but not to overall performance. In comparison, high-physical workload was strongly associated with longer absenteeism and increased error rates. Furthermore, controlling for physical workload, age diversity was related to shorter absenteeism, and the presence of females in the team was associated with shorter absenteeism and better performance. In summary, this study suggests that both ergonomics work design and mixed team composition may compensate age-related productivity risks in manufacturing by maintaining the work ability of older employees and improving job quality.

Vertically-aligned BCN Nanotube Arrays with Superior Performance in Electrochemical capacitors

PubMed Central

Zhou, Junshuang; Li, Na; Gao, Faming; Zhao, Yufeng; Hou, Li; Xu, Ziming

2014-01-01

Electrochemical capacitors (EC) have received tremendous interest due to their high potential to satisfy the urgent demand in many advanced applications. The development of new electrode materials is considered to be the most promising approach to enhance the EC performance substantially. Herein, we present a high-capacity capacitor material based on vertically-aligned BC2N nanotube arrays (VA-BC2NNTAs) synthesized by low temperature solvothermal route. The obtained VA-BC2NNTAs display the good aligned nonbuckled tubular structure, which could indeed advantageously enhance capacitor performance. VA-BC2NNTAs exhibit an extremely high specific capacitance, 547 Fg−1, which is about 2–6 times larger than that of the presently available carbon-based materials. Meanwhile, VA-BC2NNTAs maintain an excellent rate capability and high durability. All these characteristics endow VA-BC2NNTAs an alternative promising candidate for an efficient electrode material for electrochemical capacitors (EC). PMID:25124300

Silicon/copper dome-patterned electrodes for high-performance hybrid supercapacitors.

PubMed

Liu, Xuyan; Jung, Hun-Gi; Kim, Sang-Ok; Choi, Ho-Suk; Lee, Sangwha; Moon, Jun Hyuk; Lee, Joong Kee

2013-12-02

This study proposes a method for manufacturing high-performance electrode materials in which controlling the shape of the current collector and electrode material for a Li-ion capacitor (LIC). In particular, the proposed LIC manufacturing method maintains the high voltage of a cell by using a microdome-patterned electrode material, allowing for reversible reactions between the Li-ion and the active material for an extended period of time. As a result, the LICs exhibit initial capacities of approximately 42 F g⁻¹, even at 60 A g⁻¹. The LICs also exhibit good cycle performance up to approximately 15,000 cycles. In addition, these advancements allow for a considerably higher energy density than other existing capacitor systems. The energy density of the proposed LICs is approximately nine, two, and 1.5 times higher than those of the electrochemical double layer capacitor (EDLC), AC/LiMn₂O₄ hybrid capacitor, and intrinsic Si/AC LIC, respectively.

Silicon/copper dome-patterned electrodes for high-performance hybrid supercapacitors

NASA Astrophysics Data System (ADS)

Liu, Xuyan; Jung, Hun-Gi; Kim, Sang-Ok; Choi, Ho-Suk; Lee, Sangwha; Moon, Jun Hyuk; Lee, Joong Kee

2013-12-01

This study proposes a method for manufacturing high-performance electrode materials in which controlling the shape of the current collector and electrode material for a Li-ion capacitor (LIC). In particular, the proposed LIC manufacturing method maintains the high voltage of a cell by using a microdome-patterned electrode material, allowing for reversible reactions between the Li-ion and the active material for an extended period of time. As a result, the LICs exhibit initial capacities of approximately 42 F g-1, even at 60 A g-1. The LICs also exhibit good cycle performance up to approximately 15,000 cycles. In addition, these advancements allow for a considerably higher energy density than other existing capacitor systems. The energy density of the proposed LICs is approximately nine, two, and 1.5 times higher than those of the electrochemical double layer capacitor (EDLC), AC/LiMn2O4 hybrid capacitor, and intrinsic Si/AC LIC, respectively.

Impact of franchisee-protection legislation on the performance of a marketing system: the case of gasoline retailing. [Petroleum Marketing Practices Act of 1978

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heinzelmann, R.

1982-01-01

The Petroleum Marketing Practices Act of 1978 intended to protect franchisee dealers, preserve competition, and maintain trends towards productivity improvements. As such, it represented an expression of countervailing power, service station dealers against their suppliers - large oil companies. This dissertation examines the impact of similar previous laws on the performance of the gasoline-marketing system. Marketing theory and previous research findings suggest that focus towards greater efficiency supporting competitor conditions contribute more performance benefits than legislation of franchisee dealer protection. Such laws, as the Robinson-Patman Act and the Automobile Dealers' Good Faith Act, were found to have only a limitedmore » impact. Their long-term benefits did not materialize. It is, therefore, hypothesized that the law will not have favorable results and serve its purpose satisfactorily.« less

Combined emergency braking and turning of articulated heavy vehicles

NASA Astrophysics Data System (ADS)

Morrison, Graeme; Cebon, David

2017-05-01

'Slip control' braking has been shown to reduce the emergency stopping distance of an experimental heavy goods vehicle by up to 19%, compared to conventional electronic/anti-lock braking systems (EBS). However, little regard has been given to the impact of slip control braking on the vehicle's directional dynamics. This paper uses validated computer models to show that slip control could severely degrade directional performance during emergency braking. A modified slip control strategy, 'attenuated slip demand' (ASD) control, is proposed in order to rectify this. Results from simulations of vehicle performance are presented for combined braking and cornering manoeuvres with EBS and slip control braking with and without ASD control. The ASD controller enables slip control braking to provide directional performance comparable with conventional EBS while maintaining a substantial stopping distance advantage. The controller is easily tuned to work across a wide range of different operating conditions.

Individual and contextual factors associated with community health workers' performance in Nyanza Province, Kenya: a multilevel analysis.

PubMed

Kawakatsu, Yoshito; Sugishita, Tomohiko; Tsutsui, Junya; Oruenjo, Kennedy; Wakhule, Stephen; Kibosia, Kennedy; Were, Eric; Honda, Sumihisa

2015-10-01

Several African and South Asian countries are currently investing in new cadres of community health workers (CHWs) as a major part of strategies aimed at reaching the Millennium Development Goals. However, one review concluded that community health workers did not consistently provide services likely to have substantial effects on health and that quality was usually poor. The objective of this research was to assess the CHWs' performance in Western Kenya and describe determinants of that performance using a multilevel analysis of the two levels, individual and supervisor/community. This study conducted three surveys between August and September 2011 in Nyanza Province, Kenya. The participants of the three surveys were all 1,788 active CHWs, all their supervisors, and 2,560 randomly selected mothers who had children aged 12 to 23 months. CHW performance was generated by three indicators: reporting rate, health knowledge and household coverage. Multilevel analysis was performed to describe the determinants of that performance. The significant factors associated with the CHWs' performance were their marital status, educational level, the size of their household, their work experience, personal sanitation practice, number of supervisions received and the interaction between their supervisors' better health knowledge and the number of supervisions. A high quality of routine supervisions is one of the key interventions in sustaining a CHW's performance. In addition, decreasing the dropout rate of CHWs is important both for sustaining their performance and for avoiding the additional cost of replacing them. As for the selection criteria of new CHWs, good educational status, availability of supporters for household chores and good sanitation practices are all important in selecting CHWs who can maintain their high performance level.

Drivers of U.S. mineral demand

USGS Publications Warehouse

Sznopek, John L.

2006-01-01

Introduction: The word 'demand' has different meanings for different people. To some, it means their 'wants and needs,' to others it is what they consume. Yet, when considering economics, demand refers to the specific amounts of goods or services that individuals will purchase at various prices. Demand is measured over a given time period. It is determined by a number of factors including income, tastes, and the price of complementary and substitute goods. In this paper, the term consumption is used fairly synonymously with the term demand. Most mineral commodities, like iron ore, copper, zinc, and gravel, are intermediate goods, which means that they are used in the production of other goods, called final goods. Demand for intermediate goods is called derived demand because such demand is derived from the demand for final goods. When demand increases for a commodity, generally the price rises. With everything else held constant, this increases the profits for those who provide this commodity. Normally, this would increase profits of existing producers and attract new producers to the market. When demand for a commodity decreases, generally the price falls. Normally, this would cause profits to fall and, as a consequence, the least efficient firms may be forced from the industry. Demand changes for specific materials as final goods or production techniques are reengineered while maintaining or improving product performance, for example, the use of aluminum in the place of copper in long distance electrical transmission lines or plastic replacing steel in automobile bumpers. Substitution contributes to efficient material usage by utilizing cheaper or technically superior materials. In this way, it may also alleviate materials scarcity. If a material becomes relatively scarce (and thus more expensive), a more abundant (and less expensive) material generally replaces it (Wagner and others, 2003, p. 91).

Building a successful trauma practice in a community setting.

PubMed

Althausen, Peter L

2011-12-01

The development of a busy community-based trauma practice is a multifaceted endeavor that requires good clinical judgment, business acumen, interpersonal skills, and negotiation tactics. Private practice is a world in which perfect outcomes are expected and efficiency is paramount. Successful operative outcomes are dependent on solid clinical training, good preoperative planning, and communication with mentors when necessary. Private practitioners must display confidence, polite behavior, and promptness. Maintaining availability for consultation from emergency room physicians, private practice physicians, and local orthopaedic surgeons is a powerful marketing tool. Orthopaedic trauma surgery has been shown to be a profitable field for hospitals and private practitioners. However, physician success depends on a sound understanding of hospital finance, marketing skills, and knowledge of billing and coding. As the financial pressures of medical care increase, hospital negotiation will be paramount, and private practitioners must combine clinical and business skills to provide good patient care while maintaining independence and financial security.

The problems concerning the integration of very thin mirror shells

NASA Astrophysics Data System (ADS)

Basso, S.; Citterio, O.; Mazzoleni, F.; Pareschi, G.; Tagliaferri, G.; Valtolina, R.; Conconi, P.; Parodi, G.

2009-08-01

The necessity to reduce the mass and to increase the collecting area requires that the thickness of the optics becomes more and more thinner. Simbol-X was a typical example of this trend. Such thickness makes the shells floppy and therefore unable to maintain the correct shape. During the integration of the shells into the mechanical structure, only negligible deformation must be introduced. The low thickness means also that the shells must be glued on both sides to reach a good stiffness of the whole mirror module and this fact introduces a set of mounting problems. In INAF - Osservatorio Astronomico di Brera an integration process has been developed. The use of stiffening rings and of a temporary structure is the key to maintain the right shape of the shell. In this article the results of the integration of the first three prototypes of the Simbol-X optics are presented. The description of the process and the analysis of the degradation of the performances during the integration are shown in detail.

Improved Frame Mode Selection for AMR-WB+ Based on Decision Tree

NASA Astrophysics Data System (ADS)

Kim, Jong Kyu; Kim, Nam Soo

In this letter, we propose a coding mode selection method for the AMR-WB+ audio coder based on a decision tree. In order to reduce computation while maintaining good performance, decision tree classifier is adopted with the closed loop mode selection results as the target classification labels. The size of the decision tree is controlled by pruning, so the proposed method does not increase the memory requirement significantly. Through an evaluation test on a database covering both speech and music materials, the proposed method is found to achieve a much better mode selection accuracy compared with the open loop mode selection module in the AMR-WB+.

Thermal stress response of General Purpose Heat Source (GPHS) aeroshell material

NASA Technical Reports Server (NTRS)

Grinberg, I. M.; Hulbert, L. E.; Luce, R. G.

1980-01-01

A thermal stress test was conducted to determine the ability of the GPHS aeroshell 3 D FWPF material to maintain physical integrity when exposed to a severe heat flux such as would occur from prompt reentry of GPHS modules. The test was performed in the Giant Planetary Facility at NASA's Ames Research Center. Good agreement was obtained between the theoretical and experimental results for both temperature and strain time histories. No physical damage was observed in the test specimen. These results provide initial corroboration both of the analysis techniques and that the GPHS reentry member will survive the reentry thermal stress levels expected.

Soybean Root-Derived Hierarchical Porous Carbon as Electrode Material for High-Performance Supercapacitors in Ionic Liquids.

PubMed

Guo, Nannan; Li, Min; Wang, Yong; Sun, Xingkai; Wang, Feng; Yang, Ru

2016-12-14

Soybeans are extensively cultivated worldwide as human food. However, large quantities of soybean roots (SRs), which possess an abundant three-dimensional (3D) structure, remain unused and produce enormous pressure on the environment. Here, 3D hierarchical porous carbon was prepared by the facile carbonization of SRs followed by chemical activation. The as-prepared material, possessing large specific surface area (2143 m 2 g -1 ), good electrical conductivity, and unique 3D hierarchical porosity, shows outstanding electrochemical performance as an electrode material for supercapacitors, such as a high capacitance (276 F g -1 at 0.5 A g -1 ), superior cycle stability (98% capacitance retention after 10,000 cycles at 5 A g -1 ), and good rate capability in a symmetric two-electrode supercapacitor in 6 M KOH. Furthermore, the maximum energy density of as-assembled symmetric supercapacitor can reach 100.5 Wh kg -1 in neat EMIM BF 4 . Moreover, a value of 40.7 Wh kg -1 is maintained at ultrahigh power density (63000 W kg -1 ). These results show that the as-assembled supercapacitor can simultaneously deliver superior energy and power density.

21 CFR 212.110 - How must I maintain records of my production of PET drugs?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 4 2010-04-01 2010-04-01 false How must I maintain records of my production of PET drugs? 212.110 Section 212.110 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR POSITRON...

21 CFR 212.110 - How must I maintain records of my production of PET drugs?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 4 2011-04-01 2011-04-01 false How must I maintain records of my production of PET drugs? 212.110 Section 212.110 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR POSITRON...

Setting apart the amateur from the professional: maintaining the value of standardised representational photography.

PubMed

Banks, Debbie

2014-10-01

The purpose of this paper is to discuss the importance of standard representational photography in clinical photography and its aid in maintaining the gold standard in the medical illustration profession. it is important that professionals are aware of potential threats to good practice with many areas identified in the article.

What Boys with an Autism Spectrum Disorder Say about Establishing and Maintaining Friendships

ERIC Educational Resources Information Center

Daniel, Leslie S.; Billingsley, Bonnie S.

2010-01-01

Seven boys, 10 to 14 years old, with autism spectrum disorders and good verbal communication, were interviewed to determine how they establish and maintain friendships. Parents and the boys' teachers were interviewed for supportive information. All of the boys had friends, and 6 described establishing friendships as the most difficult aspect.…

All-solid state symmetric supercapacitors based on compressible and flexible free-standing 3D carbon nanotubes (CNTs)/poly(3,4-ethylenedioxythiophene) (PEDOT) sponge electrodes

NASA Astrophysics Data System (ADS)

He, Xin; Yang, Wenyao; Mao, Xiling; Xu, Lu; Zhou, Yujiu; Chen, Yan; Zhao, Yuetao; Yang, Yajie; Xu, Jianhua

2018-02-01

Flexible supercapacitors that maintain electrochemical performance under deformation have attracted much attention for the potential application in the flexible electronics market. A compressible and flexible free-standing electrodes sponge and all-solid-state symmetric supercapacitors based on as-prepared electrodes are presented. The carbon nanotubes (CNTs) framework is synthesized by chemical vapor deposition (CVD) method, and then composited with poly (3,4-ethylenedioxythiophene) PEDOT by the electrodeposition. This CNTs/PEDOT sponge electrode shows highest mass-specific capacitance of 147 Fg-1 at 0.5 A g-1, tuned by the PEDOT mass loading, and exhibits good cyclic stability with the evidence that more than 95% of capacitance is remained after 3000 cycles. Furthermore, the symmetric supercapacitor shows the highest energy density of 12.6 Wh kg-1 under the power density of 1 kW kg-1 and highest power density of 10.2 kW kg-1 with energy density of 8 Wh kg-1, which exhibits both high energy density and power density. The electrochemical performance of composite electrode also indicates that the operate voltage of device could be extend to 1.4 V by the n-doping and p-doping process in different potential of PEDOT component. This flexible supercapacitor maintains stable electrochemical performance working on different bending condition, which shows promising prospect for wearable energy storage applications.

Goodness of Fit: A Relational Approach to Field Instruction

ERIC Educational Resources Information Center

Ornstein, Eric D.; Moses, Helene

2010-01-01

This article uses the metaphor of "goodness of fit" to highlight the core features of a relational approach to field instruction. The distinctive attributes of this approach are contrasted with a traditional model of field instruction. The "teach or treat" dilemma is discussed to demonstrate the necessity for field instructors to maintain the…

The Supervisor and the Organised Worker. The Supervisor's "Self-Development" Series 4.

ERIC Educational Resources Information Center

Corfield, Tony

This guide, which is intended for new supervisors and managers to use in an independent study setting, deals with maintaining working relations with organized labor. The following topics are discussed in the individual sections: good personal relations (psychological aspects, wages and job security, a good working environment, techniques for…

Non-Market Valuation

Treesearch

Thomas P. Holmes

2003-01-01

In addition to commodities such as timber, forest ecosystems provide an array of goods and services that are not priced in markets but maintain, to a large degree, the characteristics of public goods (non-rivalry and non-excludability). Markets do not recognize scarcity of non-market resources and cannot be relied upon to allocate these resources to their highest and...

Personal Grooming: "Let's Fact It!". Health and the Consumer.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Elementary and Secondary Education.

Personal grooming is the topic of this learning activity package, which is one part of a consumer education series for secondary students. The module attempts to make students aware of the importance of personal appearance and grooming and to emphasize the direct correlation between maintaining good health and looking good. The learning package…

The Impossibility of Achieving Consistently Good Mental Health.

ERIC Educational Resources Information Center

Ellis, Albert

1987-01-01

People disturb themselves with irrational beliefs, some of which are obvious and blatant while others are subtle and tricky. The latter type make people more disturbed than do the former kind. Even when helped by the most efficient forms of psychotherapy, humans have difficulty achieving and maintaining good mental health. (Author/VM)

Financing Arizona's Schools: Faltering Steps Toward the "Good Society"

ERIC Educational Resources Information Center

First, Patricia F.

2007-01-01

John Kenneth Galbraith proposed a test for the "good society" that deals directly with the financing of education. The Arizona Constitution may require that the legislature establish and maintain a "general and uniform" public school system, but, as the author argues in this article, the chronicle of the school funding cases in…

Systematic sparse matrix error control for linear scaling electronic structure calculations.

PubMed

Rubensson, Emanuel H; Sałek, Paweł

2005-11-30

Efficient truncation criteria used in multiatom blocked sparse matrix operations for ab initio calculations are proposed. As system size increases, so does the need to stay on top of errors and still achieve high performance. A variant of a blocked sparse matrix algebra to achieve strict error control with good performance is proposed. The presented idea is that the condition to drop a certain submatrix should depend not only on the magnitude of that particular submatrix, but also on which other submatrices that are dropped. The decision to remove a certain submatrix is based on the contribution the removal would cause to the error in the chosen norm. We study the effect of an accumulated truncation error in iterative algorithms like trace correcting density matrix purification. One way to reduce the initial exponential growth of this error is presented. The presented error control for a sparse blocked matrix toolbox allows for achieving optimal performance by performing only necessary operations needed to maintain the requested level of accuracy. Copyright 2005 Wiley Periodicals, Inc.

Influence of gate overlap engineering on ambipolar and high frequency characteristics of tunnel-CNTFET

NASA Astrophysics Data System (ADS)

Shaker, Ahmed; Ossaimee, Mahmoud; Zekry, A.; Abouelatta, Mohamed

2015-10-01

In this paper, we have investigated the effect of gate overlapping-on-drain on the ambipolar behavior and high frequency performance of tunnel CNTFET (T-CNTFET). It is found that gate overlapping-on-drain suppresses the ambipolar behavior and improves OFF-state current. The simulation results show that there is an optimum choice for the overlapped length. On the other hand, this overlap deteriorates the high frequency performance. The high frequency figure of merit is analyzed in terms of the unit-gain cutoff frequency (fT). Further, we propose two different approaches to improve the high frequency performance of the overlapped T-CNTFET. The first one is based on inserting a high-dielectric constant material below the overlapped part of the gate and the second is based on depositing a different work function gate metal for the overlapped region. The two solutions show very good improvement in the high frequency performance with maintaining the suppression of the ambipolar characteristics.

Reach performance while wearing the Space Shuttle launch and entry suit during exposure to launch accelerations

NASA Technical Reports Server (NTRS)

Bagian, James P.; Greenisen, M. C.; Schafer, L. E.; Probe, J. D.; Krutz, Robert W., Jr.

1990-01-01

A crew of four veteran astronaut/pilots were subjected to sustained linear accelerations of up to 3G(x) in order to quantify crew reach performance while wearing the currently used Launch and Entry Suit (LES). Photogrammetric techniques were used to quantify magnitudes of reach in any direction while subjects rode a centrifuge. Subjects exhibited small changes of reach capability in the +x (forward) direction which ranged from an improvement of 2.04 cm to a decrease of 14.4 cm while reach performance in the +z (overhead) direction was improved in three of four subjects, indicating that any task which could be accomplished under exposure to 1G(x) could definitely be done at 3G(x). The data from this experiment demonstrated that Shuttle crews in training can expect to maintain all of the overhead reach capability evident in good simulator runs and suffer only moderate degradation in the forward reach performance during the launch phase of an actual Shuttle mission.

Collagenous colitis: Requirement for high-dose budesonide as maintenance treatment.

PubMed

Fernandez-Bañares, Fernando; Piqueras, Marta; Guagnozzi, Danila; Robles, Virginia; Ruiz-Cerulla, Alexandra; Casanova, María José; Gisbert, Javier P; Busquets, David; Arguedas, Yolanda; Pérez-Aisa, Angeles; Fernández-Salazar, Luis; Lucendo, Alfredo J

2017-09-01

Controlled studies show high efficacy of budesonide in inducing short-term clinical remission in collagenous colitis (CC), but relapses are common after its withdrawal. To evaluate the need for high-dose budesonide (≥6mg/d) to maintain clinical remission in CC. Analysis of a multicentre retrospective cohort of 75 patients with CC (62.3±1.5years; 85% women) treated with budesonide in a clinical practice setting between 2013 and 2015. Frequency of budesonide (9mg/d) refractoriness and safety, and the need for high-dose budesonide to maintain clinical remission, were evaluated. Drugs used as budesonide-sparing, including azathioprine and mercaptopurine, were recorded. Logistic regression analysis was performed to evaluate the risk factors associated with the need for high-dose budesonide (≥6mg/d) to maintain clinical remission. Budesonide induced clinical remission in 92% of patients, with good tolerance. Fourteen of 68 patients (21%; 95% CI, 13-32%) needed high-dose budesonide to maintain remission. Only intake of NSAIDs at diagnosis (OR, 8.6; 95% CI, 1.6-44) was associated with the need for high-dose budesonide in the multivariate analysis. with thiopurines was effective in 5 out of 6 patients (83%; 95% CI, 44-97%), allowing for withdrawal from or a dose decrease of budesonide. One fifth of CC patients, especially those with NSAID intake at diagnosis, require high-dose budesonide (≥6mg/d) to maintain clinical remission. In this setting, thiopurines might be effective as budesonide-sparing drugs. Copyright © 2017 Editrice Gastroenterologica Italiana S.r.l. Published by Elsevier Ltd. All rights reserved.

[THE EMPIRICAL DISTINCTIVENESS OF WORK ENGAGEMENT AND WORKAHOLISM AMONG HOSPITAL NURSES IN JAPAN : THE EFFECT ON SLEEP QUALITY AND JOB PERFORMANCE].

PubMed

Kubota, Kazumi; Shimazu, Akihito; Kawakami, Norito; Takahashi, Masaya; Nakata, Akinori; Schaufeli, Wilmar B

2011-01-01

The aim of the present study is to demonstrate the distinctiveness of work engagement and workaholism by examining their relationships with sleep quality and job performance. A total of 447 nurses from 3 hospitals in Japan were surveyed using a self-administrated questionnaire including Utrecht Work Engagement Scale (UWES), the Dutch Workaholism Scale (DUWAS), questions on sleep quality (7 items) regarding (1) difficulty initiating sleep, (2) difficulty maintaining sleep, (3) early morning awakening, (4) dozing off or napping in daytime, (5) excessive daytime sleepiness at work, (6) difficulty awakening in the morning, and (7) tiredness awakening in the morning, and the World Health Organization Health Work Performance Questionnaire. The Structural Equation Modeling showed that, work engagement was positively related to sleep quality and job performance whereas workaholism negatively to sleep quality and job performance. The findings suggest that work engagement and workaholism are conceptually distinctive and that the former is positively and the latter is negatively related to well-being (i.e., good sleep quality and job performance).

Relationship between functional vision and balance and mobility performance in community-dwelling older adults.

PubMed

Aartolahti, Eeva; Häkkinen, Arja; Lönnroos, Eija; Kautiainen, Hannu; Sulkava, Raimo; Hartikainen, Sirpa

2013-10-01

Vision is an important prerequisite for balance control and mobility. The role of objectively measured visual functions has been previously studied but less is known about associations of functional vision, that refers to self-perceived vision-based ability to perform daily activities. The aim of the study was to investigate the relationship between functional vision and balance and mobility performance in a community-based sample of older adults. This study is part of a Geriatric Multidisciplinary Strategy for the Good Care of the Elderly project (GeMS). Participants (576) aged 76-100 years (mean age 81 years, 70 % women) were interviewed using a seven-item functional vision questionnaire (VF-7). Balance and mobility were measured by the Berg balance scale (BBS), timed up and go (TUG), chair stand test, and maximal walking speed. In addition, self-reported fear of falling, depressive symptoms (15-item Geriatric Depression Scale), cognition (Mini-Mental State Examination) and physical activity (Grimby) were assessed. In the analysis, participants were classified into poor, moderate, or good functional vision groups. The poor functional vision group (n = 95) had more comorbidities, depressed mood, cognition decline, fear of falling, and reduced physical activity compared to participants with moderate (n = 222) or good functional vision (n = 259). Participants with poor functional vision performed worse on all balance and mobility tests. After adjusting for gender, age, chronic conditions, and cognition, the linearity remained statistically significant between functional vision and BBS (p = 0.013), TUG (p = 0.010), and maximal walking speed (p = 0.008), but not between functional vision and chair stand (p = 0.069). Poor functional vision is related to weaker balance and mobility performance in community-dwelling older adults. This highlights the importance of widespread assessment of health, including functional vision, to prevent balance impairment and maintain independent mobility among older population.

Key composition optimization of meat processed protein source by vacuum freeze-drying technology.

PubMed

Ma, Yan; Wu, Xingzhuang; Zhang, Qi; Giovanni, Vigna; Meng, Xianjun

2018-05-01

Vacuum freeze-drying technology is a high technology content, a wide range of knowledge of technology in the field of drying technology is involved, it is also a method of the most complex drying equipment, the largest energy consumption, the highest cost of drying method, but due to the particularity of its dry goods: the freeze-drying food has the advantages of complex water performance is good, cooler and luster of freezing and drying food to maintain good products, less nutrient loss, light weight, easy to carry transportation, easy to long-term preservation, and on the quality is far superior to the obvious advantages of other dried food, making it become the forefront of drying technology research and development. The freeze-drying process of Chinese style ham and western Germany fruit tree tenderloin is studied in this paper, their eutectic point, melting point and collapse temperature, freeze-drying curve and its heat and mass transfer characteristics are got, then the precool temperature and the highest limiting temperature of sublimation interface are determined. The effect of system pressure on freeze-dried rate in freeze-drying process is discussed, and the method of regulating pressure circularly is determined.

Nanowire-Assembled Hierarchical ZnCo2O4 Microstructure Integrated with a Low-Power Microheater for Highly Sensitive Formaldehyde Detection.

PubMed

Long, Hu; Harley-Trochimczyk, Anna; Cheng, Siyi; Hu, Hao; Chi, Won Seok; Rao, Ameya; Carraro, Carlo; Shi, Tielin; Tang, Zirong; Maboudian, Roya

2016-11-23

Nanowire-assembled 3D hierarchical ZnCo 2 O 4 microstructure is synthesized by a facile hydrothermal route and a subsequent annealing process. In comparison to simple nanowires, the resulting dandelion-like structure yields more open spaces between nanowires, which allow for better gas diffusion and provide more active sites for gas adsorption while maintaining good electrical conductivity. The hierarchical ZnCo 2 O 4 microstructure is integrated on a low-power microheater platform without using binders or conductive additives. The hierarchical structure of the ZnCo 2 O 4 sensing material provides reliable electrical connection across the sensing electrodes. The resulting sensor exhibits an ultralow detection limit of 3 ppb toward formaldehyde with fast response and recovery as well as good selectivity to CO, H 2 , and hydrocarbons such as n-pentane, propane, and CH 4 . The sensor only consumes ∼5.7 mW for continuous operation at 300 °C with good long-term stability. The excellent sensing performance of this hierarchical structure based sensor suggests the advantages of combining such structures with microfabricated heaters for practical low-power sensing applications.

19 CFR 143.6 - Failure to maintain performance standards.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Failure to maintain performance standards. 143.6... maintain performance standards. ABI participants must adhere to the performance requirements and... maximum of 90 days, if the participant's performance remains below standard, but, except for immediate...

Design, fabrication and testing of a CFA for use in the solar power satellite

NASA Technical Reports Server (NTRS)

Brown, W. C.

1978-01-01

A crossed field amplifier was designed to meet the performance objectives of high signal to noise ratio, an efficiency of 85%, a CW microwave power output of 5-8 kW, and a frequency of 2450 MHz. The signal to noise ratio achieved was better than 69 db/MHz in a 2000 MHz band centered on the carrier. High circuit efficiency of 97% and a sharp knee on voltage current characteristic were achieved. The basic problem of maintaining good transfer of heat to the external radiator while providing for adequate connections to input and output was solved. Maximum efficiency achieved was 70.5% and gain and power level were below objectives. An investigation of causes of reduced performance indicated the poor field pattern in the cathode anode interaction area of the tube was a major cause.

Enabling search over encrypted multimedia databases

NASA Astrophysics Data System (ADS)

Lu, Wenjun; Swaminathan, Ashwin; Varna, Avinash L.; Wu, Min

2009-02-01

Performing information retrieval tasks while preserving data confidentiality is a desirable capability when a database is stored on a server maintained by a third-party service provider. This paper addresses the problem of enabling content-based retrieval over encrypted multimedia databases. Search indexes, along with multimedia documents, are first encrypted by the content owner and then stored onto the server. Through jointly applying cryptographic techniques, such as order preserving encryption and randomized hash functions, with image processing and information retrieval techniques, secure indexing schemes are designed to provide both privacy protection and rank-ordered search capability. Retrieval results on an encrypted color image database and security analysis of the secure indexing schemes under different attack models show that data confidentiality can be preserved while retaining very good retrieval performance. This work has promising applications in secure multimedia management.

Dose-response association between leisure time physical activity and work ability: Cross-sectional study among 3000 workers.

PubMed

Calatayud, Joaquin; Jakobsen, Markus D; Sundstrup, Emil; Casaña, Jose; Andersen, Lars L

2015-12-01

Regular physical activity is important for longevity and health, but knowledge about the optimal dose of physical activity for maintaining good work ability is unknown. This study investigates the association between intensity and duration of physical activity during leisure time and work ability in relation to physical demands of the job. From the 2010 round of the Danish Work Environment Cohort Study, currently employed wage earners with physically demanding work (n = 2952) replied to questions about work, lifestyle and health. Excellent (100 points), very good (75 points), good (50 points), fair (25 points) and poor (0 points) work ability in relation to the physical demands of the job was experienced by 18%, 40%, 30%, 10% and 2% of the respondents, respectively. General linear models that controlled for gender, age, physical and psychosocial work factors, lifestyle and chronic disease showed that the duration of high-intensity physical activity during leisure was positively associated with work ability, in a dose-response fashion (p < 0.001). Those performing ⩾ 5 hours of high-intensity physical activity per week had on average 8 points higher work ability than those not performing such activities. The duration of low-intensity leisure-time physical activity was not associated with work ability (p = 0.5668). The duration of high-intensity physical activity during leisure time is associated in a dose-response fashion with work ability, in workers with physically demanding jobs. © 2015 the Nordic Societies of Public Health.

Good work - how is it recognised by the nurse?

PubMed

Christiansen, Bjørg

2008-06-01

The aim of this paper is to shed light on how nurses describe situations that reflect achievement and provide confirmation that they have done good work. Nurses' recognition of good work does not seem to have been the object of direct investigation, but is indirectly reflected in studies focusing on nurses' perceptions on work environments and the multifaceted nature of nursing. However, acknowledging high-quality performance in professional nurses can facilitate nurses in maintaining and strengthening the goals and values of the profession. This in turn can help nurses shoulder the multifaceted responsibilities they have to patients and next of kin. This paper is part of the Professional Learning in a Changing Society project, Institute of Educational Research, University of Oslo, funded by the Research Council of Norway. The project involves four professional groups. This paper, however, focuses on a group of 10 nurses, nine of whom work in hospitals and one in an outpatient clinic. A qualitative approach was chosen to gain insight into how nurses, as well as the other professional groups in the project, engage in processes of knowledge production and quality assurance work. Data presented in this paper derive from semi-structured in-depth interviews conducted during spring 2005 and focuses on the recognition of good work. The following themes were identified as essential in confirming that one did good work: securing fundamental needs of patients and next of kin; managing the flow of responsibilities; positive feedback. CONCLUSIONS. Good work seems to be related to specific situations and a sense of achievement by the respondents. Recognition of good work is not only rewarding and enjoyable; it may also serve as a source of consciousness raising for professional and ethical guidelines in the work place.

Neuroimaging markers associated with maintenance of optimal memory performance in late-life.

PubMed

Dekhtyar, Maria; Papp, Kathryn V; Buckley, Rachel; Jacobs, Heidi I L; Schultz, Aaron P; Johnson, Keith A; Sperling, Reisa A; Rentz, Dorene M

2017-06-01

Age-related memory decline has been well-documented; however, some individuals reach their 8th-10th decade while maintaining strong memory performance. To determine which demographic and biomarker factors differentiated top memory performers (aged 75+, top 20% for memory) from their peers and whether top memory performance was maintained over 3 years. Clinically normal adults (n=125, CDR=0; age: 79.5±3.57 years) from the Harvard Aging Brain Study underwent cognitive testing and neuroimaging (amyloid PET, MRI) at baseline and 3-year follow-up. Participants were grouped into Optimal (n=25) vs. Typical (n=100) performers using performance on 3 challenging memory measures. Non-parametric tests were used to compare groups. There were no differences in age, sex, or education between Optimal vs. Typical performers. The Optimal group performed better in Processing Speed (p=0.016) and Executive Functioning (p<0.001). Optimal performers had larger hippocampal volumes at baseline compared with Typical Performers (p=0.027) but no differences in amyloid burden (p=0.442). Twenty-three of the 25 Optimal performers had longitudinal data and16 maintained top memory performance while 7 declined. Non-Maintainers additionally declined in Executive Functioning but not Processing Speed. Longitudinally, there were no hippocampal volume differences between Maintainers and Non-Maintainers, however Non-Maintainers exhibited higher amyloid burden at baseline in contrast with Maintainers (p=0.008). Excellent memory performance in late life does not guarantee protection against cognitive decline. Those who maintain an optimal memory into the 8th and 9th decades may have lower levels of AD pathology. Copyright © 2017. Published by Elsevier Ltd.

Maintenance of Vinyl Asbestos and Asphalt Tile Floors in Institutional, Industrial and Commercial Buildings.

ERIC Educational Resources Information Center

Asphalt and Vinyl Asbestos Tile Inst., New York, NY.

The claim is made that proper planning and modest outlays of time, labor, and material costs can provide and maintain a high appearance level for floors in institutional, commercial, and industrial buildings. Instructions for four basic steps in maintaining the good looks of vinyl asbestos and asphalt tile floors are treated in the booklet--(1)…

An Instructional Design Using the Virtual Ecological Pond for Science Education in Elementary Schools

ERIC Educational Resources Information Center

Tarng, Wernhuar; Ou, Kuo-Liang; Tsai, Wen-Shin; Lin, Yu-Si; Hsu, Chen-Kai

2010-01-01

Ecological ponds can be a good teaching tool for science teachers, but they must be built and maintained properly to provide students with a safe and suitable learning environment. However, many schools do not have the ability to build and maintain an ecological pond. This study used virtual reality technology to develop a web-based virtual…

Conformity and Resistance in Self-Management Strategies of "Good Girls"

ERIC Educational Resources Information Center

Sanders, Jackie; Munford, Robyn

2008-01-01

This article examines how girls manage challenging encounters with non-familial adults. Drawing on a subset of qualitative data collected as part of a larger ethnographic study, it examines the ways girls maintain a strong sense of self as a good person in the face of interpersonal challenge from these non-familial adults. The discourse of the…

Criterion 2: Maintenance of productive capacity of forest ecosystems

Treesearch

Stephen R. Shifley; Francisco X. Aguilar; Nianfu Song; Susan I. Stewart; David J. Nowak; Dale D. Gormanson; W. Keith Moser; Sherri Wormstead; Eric J. Greenfield

2012-01-01

People rely on forests, directly and indirectly, for a wide range of goods and services. Measures of forest productive capacity are indicators of the ability of forests to sustainably supply goods and services over time. An ongoing emphasis on maintaining productive capacity of forests can help ensure that utilization of forest resources does not impair long term...

[Evaluation of the clinical results of non-surgical treatment for pediatric sagittal fracture of mandibular condyle].

PubMed

Liu, Chang-kui; Tan, Xin-ying; Xu, Juan; Liu, Hua-wei; Liu, San-xia; Hu, Min

2013-11-01

To investigate the clinical results of occlusal splint in the treatment of sagittal fracture of mandibular condyle (SFMC) in children. Thirty-nine patients (48 condyles)aged 3-8 years with sagittal fracture of mandibular condyle were included in this study. All the patients were treated by occlusal splint.Slight open occlusion was maintained by occlusal splint for 3-6 months. Clinical and radiological examination was performed six mouths and every year after treatment. Good mandibular function was observed in 39 patients. Maximal mouth opening over 35 mm was achieved at 6 months. But 11 of the 39 patients presented with deviation on mouth opening at 6 months. The radiology showed an complete remodeling in 32 condyles (28 patients) and partial remodeling in 16 condyles (11 patients). Poor remodelling was not observed in any patients. Good clinical results can be obtained by using occlusal splint in the treatment of pediatric sagittal fracture of mandibular condyle.

[External rhinoplasty: a useful approach for a young plastic surgeon].

PubMed

Adant, J P; Bluth, F; Fissette, J

1998-12-01

Among the frequently performed plastic surgery operations, rhinoplasty is the most difficult to obtain consistently good results. It is very challenging for young plastic surgeons to modify the external appearance of the nose and restore or maintain a good airway. The external approach has alleviated some of the problems due to understanding and learning of the rhinoplasty operation. Actually, open rhinoplasty allows better visualization of anatomical deformities and better manipulation of tissues allowing better integration of nasal anatomy and physiology. This paper reviews a personal series of 82 patients operated via an open approach between October 94 and October 97. During the same period, 24 patients were operated via an endonasal or percutaneous approach (osteotomies). Indications, advantages and disadvantages of the open approach are discussed. The various techniques used in this series are described and then critically analyzed. In open rhinoplasty, our present revision rate is 8.5%. In conclusion, the open approach seems to be useful for young rhinoplastic surgeons.

A review of fault tolerant control strategies applied to proton exchange membrane fuel cell systems

NASA Astrophysics Data System (ADS)

Dijoux, Etienne; Steiner, Nadia Yousfi; Benne, Michel; Péra, Marie-Cécile; Pérez, Brigitte Grondin

2017-08-01

Fuel cells are powerful systems for power generation. They have a good efficiency and do not generate greenhouse gases. This technology involves a lot of scientific fields, which leads to the appearance of strongly inter-dependent parameters. This makes the system particularly hard to control and increases fault's occurrence frequency. These two issues call for the necessity to maintain the system performance at the expected level, even in faulty operating conditions. It is called "fault tolerant control" (FTC). The present paper aims to give the state of the art of FTC applied to the proton exchange membrane fuel cell (PEMFC). The FTC approach is composed of two parts. First, a diagnosis part allows the identification and the isolation of a fault; it requires a good a priori knowledge of all the possible faults. Then, a control part allows an optimal control strategy to find the best operating point to recover/mitigate the fault; it requires the knowledge of the degradation phenomena and their mitigation strategies.

Composite of K-doped (NH4)2V3O8/graphene as an anode material for sodium-ion batteries.

PubMed

Liu, Xin; Li, Zhiwei; Fei, Hailong; Wei, Mingdeng

2015-11-21

A layer structured K-doped (NH4)2V3O8/graphene (K-NVG) was prepared via a hydrothermal route and then used as an anode material for sodium-ion batteries for the first time. The K-NVG nanosheets have a diameter in the range of 200-500 nm. The K-NVG electrode exhibited stable cycling and a good rate performance with a reversible capacity of 235.4 mA h g(-1), which is much higher than the 90.5 mA h g(-1) value of the (NH4)2V3O8/graphene electrode after 100 cycles at a current density of 100 mA g(-1). Simultaneously, the retention rate was maintained at 82% even after 250 cycles at the current density of 300 mA g(-1). Such good electrochemical properties may be attributed to the K-NVG's stable layered structure.

AMOBH: Adaptive Multiobjective Black Hole Algorithm.

PubMed

Wu, Chong; Wu, Tao; Fu, Kaiyuan; Zhu, Yuan; Li, Yongbo; He, Wangyong; Tang, Shengwen

2017-01-01

This paper proposes a new multiobjective evolutionary algorithm based on the black hole algorithm with a new individual density assessment (cell density), called "adaptive multiobjective black hole algorithm" (AMOBH). Cell density has the characteristics of low computational complexity and maintains a good balance of convergence and diversity of the Pareto front. The framework of AMOBH can be divided into three steps. Firstly, the Pareto front is mapped to a new objective space called parallel cell coordinate system. Then, to adjust the evolutionary strategies adaptively, Shannon entropy is employed to estimate the evolution status. At last, the cell density is combined with a dominance strength assessment called cell dominance to evaluate the fitness of solutions. Compared with the state-of-the-art methods SPEA-II, PESA-II, NSGA-II, and MOEA/D, experimental results show that AMOBH has a good performance in terms of convergence rate, population diversity, population convergence, subpopulation obtention of different Pareto regions, and time complexity to the latter in most cases.

Multispectral optical telescope alignment testing for a cryogenic space environment

NASA Astrophysics Data System (ADS)

Newswander, Trent; Hooser, Preston; Champagne, James

2016-09-01

Multispectral space telescopes with visible to long wave infrared spectral bands provide difficult alignment challenges. The visible channels require precision in alignment and stability to provide good image quality in short wavelengths. This is most often accomplished by choosing materials with near zero thermal expansion glass or ceramic mirrors metered with carbon fiber reinforced polymer (CFRP) that are designed to have a matching thermal expansion. The IR channels are less sensitive to alignment but they often require cryogenic cooling for improved sensitivity with the reduced radiometric background. Finding efficient solutions to this difficult problem of maintaining good visible image quality at cryogenic temperatures has been explored with the building and testing of a telescope simulator. The telescope simulator is an onaxis ZERODUR® mirror, CFRP metered set of optics. Testing has been completed to accurately measure telescope optical element alignment and mirror figure changes in a cryogenic space simulated environment. Measured alignment error and mirror figure error test results are reported with a discussion of their impact on system optical performance.

Selecting a climate model subset to optimise key ensemble properties

NASA Astrophysics Data System (ADS)

Herger, Nadja; Abramowitz, Gab; Knutti, Reto; Angélil, Oliver; Lehmann, Karsten; Sanderson, Benjamin M.

2018-02-01

End users studying impacts and risks caused by human-induced climate change are often presented with large multi-model ensembles of climate projections whose composition and size are arbitrarily determined. An efficient and versatile method that finds a subset which maintains certain key properties from the full ensemble is needed, but very little work has been done in this area. Therefore, users typically make their own somewhat subjective subset choices and commonly use the equally weighted model mean as a best estimate. However, different climate model simulations cannot necessarily be regarded as independent estimates due to the presence of duplicated code and shared development history. Here, we present an efficient and flexible tool that makes better use of the ensemble as a whole by finding a subset with improved mean performance compared to the multi-model mean while at the same time maintaining the spread and addressing the problem of model interdependence. Out-of-sample skill and reliability are demonstrated using model-as-truth experiments. This approach is illustrated with one set of optimisation criteria but we also highlight the flexibility of cost functions, depending on the focus of different users. The technique is useful for a range of applications that, for example, minimise present-day bias to obtain an accurate ensemble mean, reduce dependence in ensemble spread, maximise future spread, ensure good performance of individual models in an ensemble, reduce the ensemble size while maintaining important ensemble characteristics, or optimise several of these at the same time. As in any calibration exercise, the final ensemble is sensitive to the metric, observational product, and pre-processing steps used.

Optimizing associated liver partition and portal vein ligation for staged hepatectomy outcomes: Surgical experience or appropriate patient selection?

PubMed Central

Al Hasan, Ibrahim; Tun-Abraham, Mauro Enrique; Wanis, Kerollos N.; Garcia-Ochoa, Carlos; Levstik, Mark A.; Al-Judaibi, Bandar; Hernandez-Alejandro, Roberto

2017-01-01

Background Early reports of associated liver partition and portal vein ligation for staged hepatectomy (ALPPS) outcomes have been suboptimal. The literature has confirmed that learning curves influence surgical outcomes. We have 54 months of continuous experience performing ALPPS with strict selection criteria. This study aimed to evaluate the impact of the learning curve on ALPPS outcomes. Methods We retrospectively compared patients who underwent ALPPS between April 2012 and March 2016. Patients were grouped into 2 24-month (early and late) periods. All candidates had a high tumour load requiring staged hepatectomy after chemotherapy response, a predicted future liver remnant (FLR) less than 30% and good performance status. Results Thirty-three patients underwent ALPPS during the study period: 16 in the early group (median age 65 yr, mean body mass index [BMI] 27) and 17 in the late group (median age 60 yr, mean BMI 25). Bilobar disease was comparable in both groups (94% v. 88%, p > 0.99). Duration of surgery was not statistically different. Intraoperative blood loss and need for transfusion were significantly lower in the late group (200 ± 109 mL v. 100 ± 43 mL, p < 0.05). The late group had a higher proportion of monosegment ALPPS (4:1). There were no deaths within 90 days in either cohort. Rates of postoperative complications were not statistically significant between groups. The R0 resection rate was similar. The entire 1-year disease-free and overall survival were 52% and 84%, respectively. Conclusion Excellent results can be obtained in innovative complex surgery with careful patient selection and good technical skills. Additionally, the learning curve brought confidence to perform more complex procedures while maintaining good outcomes. PMID:29173259

Optimization of operation conditions for the startup of aerobic granular sludge reactors biologically removing carbon, nitrogen, and phosphorous.

PubMed

Lochmatter, Samuel; Holliger, Christof

2014-08-01

The transformation of conventional flocculent sludge to aerobic granular sludge (AGS) biologically removing carbon, nitrogen and phosphorus (COD, N, P) is still a main challenge in startup of AGS sequencing batch reactors (AGS-SBRs). On the one hand a rapid granulation is desired, on the other hand good biological nutrient removal capacities have to be maintained. So far, several operation parameters have been studied separately, which makes it difficult to compare their impacts. We investigated seven operation parameters in parallel by applying a Plackett-Burman experimental design approach with the aim to propose an optimized startup strategy. Five out of the seven tested parameters had a significant impact on the startup duration. The conditions identified to allow a rapid startup of AGS-SBRs with good nutrient removal performances were (i) alternation of high and low dissolved oxygen phases during aeration, (ii) a settling strategy avoiding too high biomass washout during the first weeks of reactor operation, (iii) adaptation of the contaminant load in the early stage of the startup in order to ensure that all soluble COD was consumed before the beginning of the aeration phase, (iv) a temperature of 20 °C, and (v) a neutral pH. Under such conditions, it took less than 30 days to produce granular sludge with high removal performances for COD, N, and P. A control run using this optimized startup strategy produced again AGS with good nutrient removal performances within four weeks and the system was stable during the additional operation period of more than 50 days. Copyright © 2014 Elsevier Ltd. All rights reserved.

Cooperation and depressive symptoms.

PubMed

Brendan Clark, C; Thorne, Christopher B; Hardy, Sonya; Cropsey, Karen L

2013-09-25

Deficits in pro-social cooperation are common in many individuals with mental illnesses such as depression. For decades, researchers have used economic game paradigms to compare cross-cultural cooperative behavior. However, research using economic games to assess cooperative behavior in clinical populations is in the early stages. We hypothesized that individuals with greater depressive symptoms would struggle to maintain reciprocity in iterative games, but not in single-iteration games measuring personal values. Participants (n=41) played four computer-based economic games (prisoner's dilemma, the public goods game, the ultimatum game, and the trust game) measuring different aspects of cooperation. Participants completed the Depression Anxiety and Stress Scale (DASS) and other measures of personality and demographics. Analyses assessed the relationships between game performance and psychological distress as measured by the DASS. Significant correlations were found between game performance and depressive symptoms, but not symptoms of anxiety or stress. Performance in the prisoner's dilemma and public goods game was significantly related to depression in a linear regression even when known associations with depressive affect such as age, gender, race, education, marital status, and neuroticism were controlled for. Depressive symptoms were associated with an inability to sustain reciprocal cooperation. Participants showed the predicted deficits in cooperation in these economic games. Economic games show the potential for assessing the social deficits associated with depressive symptoms. © 2013 Elsevier B.V. All rights reserved.

The influence of perceived stress and musculoskeletal pain on work performance and work ability in Swedish health care workers.

PubMed

Lindegård, A; Larsman, P; Hadzibajramovic, E; Ahlborg, G

2014-05-01

To evaluate the influence of perceived stress and musculoskeletal ache/pain, separately and in combination, at baseline, on self-rated work ability and work performance at two-year follow-up. Survey data were collected with a 2-year interval. Health care workers participating at both waves were included. Inclusion criteria were good self-reported work ability and unchanged self-rated work performance at baseline, resulting in 770 participants; 617 women and 153 men. Musculoskeletal pain was assessed using the question "How often do you experience pain in joints and muscles, including the neck and low back?", perceived stress with a modified version of a single item from the QPS-Nordic questionnaire, work performance by the question "Have your work performance changed during the preceding 12 months?" and work ability by a single item from the work ability index. Associations between baseline data and the two outcomes at follow-up were analysed by means of the log binomial model and expressed as risk ratios (RR) with 95% confidence intervals (CI). A combination of frequent musculoskeletal pain and perceived stress constituted the highest risk for reporting decreased work performance (RR 1.7; CI 1.28-2.32) and reduced work ability (RR 1.7; CI 1.27-2.30) at follow-up. Separately, frequent pain, but not stress, was clearly associated with both outcomes. The results imply that proactive workplace interventions in order to maintain high work performance and good work ability should include measures to promote musculoskeletal well-being for the employees and measures, both individual and organizational, to minimize the risk of persistent stress reactions.

Expertise for upright faces improves the precision but not the capacity of visual working memory.

PubMed

Lorenc, Elizabeth S; Pratte, Michael S; Angeloni, Christopher F; Tong, Frank

2014-10-01

Considerable research has focused on how basic visual features are maintained in working memory, but little is currently known about the precision or capacity of visual working memory for complex objects. How precisely can an object be remembered, and to what extent might familiarity or perceptual expertise contribute to working memory performance? To address these questions, we developed a set of computer-generated face stimuli that varied continuously along the dimensions of age and gender, and we probed participants' memories using a method-of-adjustment reporting procedure. This paradigm allowed us to separately estimate the precision and capacity of working memory for individual faces, on the basis of the assumptions of a discrete capacity model, and to assess the impact of face inversion on memory performance. We found that observers could maintain up to four to five items on average, with equally good memory capacity for upright and upside-down faces. In contrast, memory precision was significantly impaired by face inversion at every set size tested. Our results demonstrate that the precision of visual working memory for a complex stimulus is not strictly fixed but, instead, can be modified by learning and experience. We find that perceptual expertise for upright faces leads to significant improvements in visual precision, without modifying the capacity of working memory.

Flexible Fe3O4@Carbon Nanofibers Hierarchically Assembled with MnO2 Particles for High-Performance Supercapacitor Electrodes.

PubMed

Iqbal, Nousheen; Wang, Xianfeng; Babar, Aijaz Ahmed; Zainab, Ghazala; Yu, Jianyong; Ding, Bin

2017-11-09

Increasing use of wearable electronic devices have resulted in enhanced demand for highly flexible supercapacitor electrodes with superior electrochemical performance. In this study, flexible composite membranes with electrosprayed MnO 2 particles uniformly anchored on Fe 3 O 4 doped electrospun carbon nanofibers (Fe 3 O 4 @CNF Mn ) have been prepared as flexible electrodes for high-performance supercapacitors. The interconnected porous beaded structure ensures free movement of electrolyte within the composite membranes, therefore, the developed supercapacitor electrodes not only offer high specific capacitance of ~306 F/g, but also exhibit good capacitance retention of ~85% after 2000 cycles, which certify that the synthesized electrodes offer high and stable electrochemical performance. Additionally, the supercapacitors fabricated from our developed electrodes well maintain their performance under flexural stress and exhibit a very minute change in specific capacitance even up to 180° bending angle. The developed electrode fabrication strategy integrating electrospinning and electrospray techniques paves new insights into the development of potential functional nanofibrous materials for light weight and flexible wearable supercapacitors.

7 CFR 1945.27 - Relationship between FCIC and FmHA or its successor agency under Public Law 103-354.

Code of Federal Regulations, 2010 CFR

2010-01-01

... intended to assist in maintaining and improving the working relationship between the FCIC and the FmHA or... provide instructions for actions to be taken by County Supervisors in maintaining a good relationship with... 7 Agriculture 13 2010-01-01 2009-01-01 true Relationship between FCIC and FmHA or its successor...

Au-Ge MEAM potential fitted to the binary phase diagram

NASA Astrophysics Data System (ADS)

Wang, Yanming; Santana, Adriano; Cai, Wei

2017-02-01

We have developed a modified embedded atom method potential for the gold-germanium (Au-Ge) binary system that is fitted to the experimental binary phase diagram. The phase diagram is obtained from the common tangent construction of the free energy curves calculated by the adiabatic switching method. While maintaining the accuracy of the melting points of pure Au and Ge, this potential reproduces the eutectic temperature, eutectic composition and the solubility of Ge in solid Au, all in good agreement with the experimental values. To demonstrate the self-consistency of the potential, we performed benchmark molecular dynamics simulations of Ge crystal growth and etching in contact with a Au-Ge liquid alloy.

A Compton scatter attenuation gamma ray spectrometer

NASA Technical Reports Server (NTRS)

Austin, W. E.

1972-01-01

A Compton scatter attenuation gamma ray spectrometer conceptual design is discussed for performing gamma spectral measurements in monodirectional gamma fields from 100 R per hour to 1,000,000 R per hour. Selectable Compton targets are used to scatter gamma photons onto an otherwise heavily shielded detector with changeable scattering efficiencies such that the count rate is maintained between 500 and 10,000 per second. Use of two sum-Compton coincident detectors, one for energies up to 1.5 MeV and the other for 600 keV to 10 MeV, will allow good peak to tail pulse height ratios to be obtained over the entire spectrum and reduces the neutron recoil background rate.

Measuring the Indonesian provinces competitiveness by using PCA technique

NASA Astrophysics Data System (ADS)

Runita, Ditha; Fajriyah, Rohmatul

2017-12-01

Indonesia is a country which has vast teritoty. It has 34 provinces. Building local competitiveness is critical to enhance the long-term national competitiveness especially for a country as diverse as Indonesia. A competitive local government can attract and maintain successful firms and increase living standards for its inhabitants, because investment and skilled workers gravitate from uncompetitive regions to more competitive ones. Altough there are other methods to measuring competitiveness, but here we have demonstrated a simple method using principal component analysis (PCA). It can directly be applied to correlated, multivariate data. The analysis on Indonesian provinces provides 3 clusters based on the competitiveness measurement and the clusters are Bad, Good and Best perform provinces.

DSN Aperture Enhancement Project Office

NASA Technical Reports Server (NTRS)

Marina, Miguel

2012-01-01

All contracts are underway for antennas, associated facilities modifications and new transmitters. High risk CPI 100kW klystron and JPL high power uplink microwave components have been designed, prototyped and successfully tested at GDSCC to support the 80kW transmitter implementation and testing at vendor facility. Open issues, which might affect project delivery date, have plans in place or are being created, to maintain DSS-35 Operational Date. There are no known open issues that affect performance. Overall good progress has been made in all areas (procurements, contracts, design and development) and the project is confident that DSS-35 & 36 antennas and the three 80kW Uplink systems will be delivered according to plan.

A Comparison of LBG and ADPCM Speech Compression Techniques

NASA Astrophysics Data System (ADS)

Bachu, Rajesh G.; Patel, Jignasa; Barkana, Buket D.

Speech compression is the technology of converting human speech into an efficiently encoded representation that can later be decoded to produce a close approximation of the original signal. In all speech there is a degree of predictability and speech coding techniques exploit this to reduce bit rates yet still maintain a suitable level of quality. This paper is a study and implementation of Linde-Buzo-Gray Algorithm (LBG) and Adaptive Differential Pulse Code Modulation (ADPCM) algorithms to compress speech signals. In here we implemented the methods using MATLAB 7.0. The methods we used in this study gave good results and performance in compressing the speech and listening tests showed that efficient and high quality coding is achieved.

Review of Nichole E. Stanford's "Good God but You Smart!: Language Prejudice and Upwardly Mobile Cajuns"

ERIC Educational Resources Information Center

Sladek, Amanda

2017-01-01

In "Good God but You Smart!" Nichole E. Stanford provides an account of how attitudes toward Cajun English (CE) perpetuate and are perpetuated by an economic system designed to maintain unequal power relations. While non-Cajun Americans are interested in what they see as Cajun culture, Stanford explains that most misunderstand what…

Cats and Portals: Video Games, Learning, and Play

ERIC Educational Resources Information Center

Gee, James Paul

2008-01-01

The author builds on arguments he has made elsewhere that good commercial video games foster deep learning and problem solving and that such games in fact promote mastery as a form of play. Here he maintains that some good video games engage players with an important type of play, namely of play as discovery, of play as surmising new possibilities…

Designing Stories for Educational Video Games: Analysis and Evaluation

ERIC Educational Resources Information Center

López-Arcos, J. R.; Padilla-Zea, N.; Paderewski, P.; Gutiérrez, F. L.

2017-01-01

The use of video games as an educational tool initially causes a higher degree of motivation in students. However, the inclusion of educational activities throughout the game can cause this initial interest to be lost. A good way to maintain motivation is to use a good story that is used as guiding thread with which to contextualize the other…

Dis-Connections in "American" Citizenship and the Post/Neo-Colonial: People of Mexican Descent and Whitestream Pedagogy and Curriculum

ERIC Educational Resources Information Center

Urrieta, Luis, Jr.

2004-01-01

In efforts to create "good" and "responsible" citizens, social educators have sought solutions (assimilation, acculturation, etc.) to the "problem" of racial, ethnic, and linguistic diversity in U.S. society (Houser & Kuzmic, 2001). The "greater good" of this neo-colonial endeavor often focuses on maintaining the privileges of the white, upper…

19 CFR 181.22 - Maintenance of records and submission of Certificate by importer.

Code of Federal Regulations, 2010 CFR

2010-04-01

... request, a written English translation thereof; (4) Shall be accepted by CBP for four years after the date... United States shall maintain in the United States, for five years after the date of entry of the good... English language or in the language of the country from which the good is exported. If the Certificate is...

Teenagers & Parents: Ten Steps for a Better Relationship. First Printing.

ERIC Educational Resources Information Center

McIntire, Roger; McIntire, Carol

Most parents have two goals that seem at odds: (1) getting their teens to behave in the right way, and (2) continuing a good relationship with their teen. To maintain a good relationship, while also continuing some control, steps need to be followed that lead to expanding independence for teens. The steps can build teens' self confidence and…

Positive Behavior Supports: Using Class Dojo as a Token Economy Point System to Encourage and Maintain Good Behaviors

ERIC Educational Resources Information Center

Garcia, Eliana; Hoang, Dana

2015-01-01

The use of positive reinforcement sometimes gets lost in translation because educators forget the importance of acknowledging good behaviors. We instinctively tend to punish and give consequences because we often forget the importance of preventing undesired behaviors from occurring in the first place. More efforts should be spent on maintaining…

47 CFR 73.1570 - Modulation levels: AM, FM, TV and Class A TV aural.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 4 2012-10-01 2012-10-01 false Modulation levels: AM, FM, TV and Class A TV... levels: AM, FM, TV and Class A TV aural. (a) The percentage of modulation is to be maintained at as high a level as is consistent with good quality of transmission and good broadcast service, with maximum...

47 CFR 73.1570 - Modulation levels: AM, FM, TV and Class A TV aural.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 4 2013-10-01 2013-10-01 false Modulation levels: AM, FM, TV and Class A TV... levels: AM, FM, TV and Class A TV aural. (a) The percentage of modulation is to be maintained at as high a level as is consistent with good quality of transmission and good broadcast service, with maximum...

47 CFR 73.1570 - Modulation levels: AM, FM, TV and Class A TV aural.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 4 2014-10-01 2014-10-01 false Modulation levels: AM, FM, TV and Class A TV... levels: AM, FM, TV and Class A TV aural. (a) The percentage of modulation is to be maintained at as high a level as is consistent with good quality of transmission and good broadcast service, with maximum...

Experiences of Public Doctors on Managing Work Difficulties and Maintaining Professional Enthusiasm in Acute General Hospitals: A Qualitative Study.

PubMed

Luk, Andrew Leung; Yau, Adrian Fai To

2018-01-01

Overseas studies suggest that 10-20% of doctors are depressed, 30-45% have burnout, and many report dissatisfaction with work-life balance. A local study on public doctors showed that 31.4% of the respondents satisfied the criteria for high burnout. Young, but moderately experienced doctors who need to work shifts appeared most vulnerable. This study aims to explore the experiences of those public doctors who have managed their work difficulties and maintained professional enthusiasm for references in medical education and continuing professional training. Ten public doctors with reputation were invited respectively from three acute general hospitals for an in-depth interview. Interviews were audio recorded and transcribed. Content analysis was carried out to identify major themes in relation to the research questions. Three themes emerging from difficulties encountered were (1) managing people, mostly are patients, followed by colleagues and then patients' relatives; (2) constraints at work, include time and resources; and (3) managing self with decision-making within a short time. Three themes generating from managing work difficulties included (1) self-adjustment with practicing problem solving and learning good communication appeared more frequently, followed by maintaining a professional attitude and accumulating clinical experiences; (2) seeking help from others; and (3) organizational support is also a theme though it is the least mentioned. Four themes emerging from maintaining work enthusiasm were (1) personal conviction and discipline: believing that they are helping the needy, having the sense of vocation and support from religion; disciplining oneself by continuing education, maintaining harmonious family relationship and volunteer work. (2) Challenging work: different challenging natures of their job. (3) Positive feedback from patients: positive encounters with patients keep a connectedness with their clients. (4) Organization support: working with good colleagues and opportunity for continuous training. Some implications for medical education include, developing good communication skill for medical students and junior doctors, preparing senior doctors to be mentors, and exploring the motivating force of spirituality/religion.

Ramadan and sport: minimizing effects upon the observant athlete.

PubMed

Shephard, Roy J

2013-12-01

The intermittent fasting of Ramadan could affect various aspects of body physiology and biochemistry important to athletic success. Much of the available information on this subject has been collected from sedentary subjects or low-level competitors, often without well matched controls. Other issues requiring clearer definition include the duration of fasting, the local environment, the timing of observations, and changes in training, diet and sleep patterns. Sleep may be shortened or made good with daytime naps. Circadian rhythms of temperature, metabolism, hormonal secretions and physical performance may be disrupted and incidental activities curtailed. Disturbances of psychomotor performance include daytime sleepiness, impaired vigilance and slower reactions. Food intake is limited to night-time meals. Sedentary individuals sometimes exploit Ramadan to reduce body fat stores. Well disciplined athletes usually maintain energy balance unless daily energy expenditures are very high. Protein intake must allow for gluconeogenesis, and provide quality protein ingested around training times. Blood sugar levels are likely to fall over a long and active day, even if morning glycogen reserves are maximized. Metabolism of fat should be encouraged, beginning prior to Ramadan; inclusion of fat in the pre-dawn meal also slows gastric emptying. Daytime fluid depletion is inevitable if athletes exercise in the heat, but the immediate deficit can usually be made good at night. Some studies show an initial fluid depletion, with recovery as Ramadan continues, possibly reflecting changes in urine and sweat production. Top athletes can maintain training throughout Ramadan, although coaches sometimes reduce demands through a pre-competitive tapering of effort. Late night or early morning training requires negotiation with players who are not observing Ramadan, and dietary adjustments to maintain optimal plasma amino acid levels when training. Performance of repeated anaerobic exercise is impaired, but aerobic power and muscular strength show little change during Ramadan. Ratings of fatigue are increased, and vigilance and reaction times are impaired, particularly during the afternoon. Medical issues during Ramadan are few. Athletes with diabetes mellitus should seek a medical exemption from fasting, and prescribed drug schedules should be carefully maintained. There is no major increase of injury rates, but competitors may have difficulty in producing urine for doping controls. Logical measures to minimize the effects of Ramadan include the optimization of mood state, maintenance of training, minimization of sleep loss, appropriate adjustments of diet, and the monitoring of competitors for chronic dehydration. Future research should concentrate on the changes observed in top athletes, particularly women, with data collected in the late afternoon after a known period of fasting in a well defined environment. It will be important to ensure that the lifestyle of those studied has been optimized. Implications of chronic dehydration for doping control also merit further investigation. Current data suggest that the impact of Ramadan upon athletic performance is small relative to the precision of test procedures, although it may be sufficient to cause a loss of medals. Negative effects vary widely with the type of sport, the season when fasting is observed, the local culture and the discipline exercised by the athlete.

Study of the performance of Micromegas detectors in magnetic field

NASA Astrophysics Data System (ADS)

Dimitrios, Sampsonidis

2018-02-01

Resistive Micromegas (MICRO MEsh GAseous Structure) detectors have been chosen by the ATLAS collaboration at LHC for the high luminosity upgrade, due to their capability to maintain full efficiency and high spatial resolution at high occupancy, for tracking muons in the forward region of the detector. The Inner Muon Station, in the high-rapidity region, the so called New Small Wheel (NSW), will be composed of micromegas detectors that will have to maintain good performance in the presence of magnetic field of up to about 0.3 T. The response of micromegas detectors is affected by the magnetic field, where the deflection of the drift electrons is described by the Lorentz angle, resulting in a bias in the reconstructed track position. Several test-beam campaigns have been performed to test the behaviour of small size resistive micromegas prototypes (10×10 cm2) in magnetic fields up to 1 T, using high momentum muon and hadron beams at CERN. These studies are performed in order to validate the capability of the chambers to provide unbiased tracks in the NSW conditions. Measurements of the Lorentz angle and drift velocity as a function of the magnetic field are presented and both are compared to expectations based on Garfield-Magboltz simulations. Several methods to correct the position bias are applied, based on the chamber configuration or on the knowledge of the local value of the magnetic field. The results of these studies are presented together with an overall discussion of the Micromegas tracking capability in magnetic field.

9 CFR 3.2 - Indoor housing facilities.

Code of Federal Regulations, 2013 CFR

2013-01-01

... those breeds that cannot tolerate lower temperatures without stress or discomfort (such as short-haired... in maintaining good housekeeping practices, adequate cleaning, adequate inspection of animals, and...

9 CFR 3.2 - Indoor housing facilities.

Code of Federal Regulations, 2012 CFR

2012-01-01

... those breeds that cannot tolerate lower temperatures without stress or discomfort (such as short-haired... in maintaining good housekeeping practices, adequate cleaning, adequate inspection of animals, and...

9 CFR 3.2 - Indoor housing facilities.

Code of Federal Regulations, 2014 CFR

2014-01-01

... those breeds that cannot tolerate lower temperatures without stress or discomfort (such as short-haired... in maintaining good housekeeping practices, adequate cleaning, adequate inspection of animals, and...

Influence of reactivation on the electrochemical performances of activated carbon based on coconut shell.

PubMed

Geng, Xin; Li, Lixiang; Zhang, Meiling; An, Baigang; Zhu, Xiaoming

2013-12-01

Coconut shell-based activated carbon (AC) were prepared by CO2 activation, and then the ACs with higher mesopore ratio were obtained by steam activation and by impregnating iron catalyst followed by steam activation, respectively. The AC with the highest mesopore ratio (AChmr) shows superior capacitive behavior, power output and high-frequency performance in supercapacitors. The results should attribute to the connection of its wide micropores and mesopores larger than 3 nm, which is more favorable for fast ionic transportation. The pore size distribution exhibits that the mesopore ratios of the ACs are significantly increased by reactivation of steam or catalyst up to 75% and 78%, respectively. As evidenced by cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic measurements, the AChmr shows superior capacitive behaviors, conductivity and performance of electrolytic ionic transportation. The response current densities are evidently enhanced through the cyclic voltammery test at 50 mV/sec scan rate. The electrochemical impedance spectroscopy demonstrates that the conductivity and ion transport performance of the ACs are improved. The specific capacitances of the ACs were increased from 140 to 240 F/g at 500 mA/g current density. The AChmr can provide much higher power density while still maintaining good energy density, and demonstrate excellent high-frequency performances. The pore structure and conductivity of the AChmr also improve the cycleability and self-discharge of supercapacitors. Such AChmr exhibits a great potential in supercapacitors, particularly for applications where high power output and good high-frequency capacitive performances are required. Copyright © 2013 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

Analysis of short-chain fatty acids in human feces: A scoping review.

PubMed

Primec, Maša; Mičetić-Turk, Dušanka; Langerholc, Tomaž

2017-06-01

Short-chain fatty acids (SCFAs) play a crucial role in maintaining homeostasis in humans, therefore the importance of a good and reliable SCFAs analytical detection has raised a lot in the past few years. The aim of this scoping review is to show the trends in the development of different methods of SCFAs analysis in feces, based on the literature published in the last eleven years in all major indexing databases. The search criteria included analytical quantification techniques of SCFAs in different human clinical and in vivo studies. SCFAs analysis is still predominantly performed using gas chromatography (GC), followed by high performance liquid chromatography (HPLC), nuclear magnetic resonance (NMR) and capillary electrophoresis (CE). Performances, drawbacks and advantages of these methods are discussed, especially in the light of choosing a proper pretreatment, as feces is a complex biological material. Further optimization to develop a simple, cost effective and robust method for routine use is needed. Copyright © 2017 Elsevier Inc. All rights reserved.

Compliant mechanism road bicycle brake: a rigid-body replacement case study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olsen, Brian M; Howell, Larry L; Magleby, Spencer P

2011-01-19

The design of high-performance bicycle brakes is complicated by the competing design objectives of increased performance and low weight. But this challenge also provides a good case study to demonstrate the design of compliant mechanisms to replace current rigid-link mechanisms. This paper briefly reviews current road brake designs, demonstrates the use of rigid-body replacement synthesis to design a compliant mechanism, and illustrates the combination of compliant mechanism design tools. The resulting concept was generated from the modified dual-pivot brake design and is a partially compliant mechanism where one pin has the dual role of a joint and a mounting pin.more » The pseudo-rigid-body model, finite element analysis, and optimization algorithms are used to generate design dimensions, and designs are considered for both titanium and E-glass flexures. The resulting design has the potential of reducing the part count and overall weight while maintaining a performance similar to the benchmark.« less

Silicon/copper dome-patterned electrodes for high-performance hybrid supercapacitors

PubMed Central

Liu, Xuyan; Jung, Hun-Gi; Kim, Sang-Ok; Choi, Ho-Suk; Lee, Sangwha; Moon, Jun Hyuk; Lee, Joong Kee

2013-01-01

This study proposes a method for manufacturing high-performance electrode materials in which controlling the shape of the current collector and electrode material for a Li-ion capacitor (LIC). In particular, the proposed LIC manufacturing method maintains the high voltage of a cell by using a microdome-patterned electrode material, allowing for reversible reactions between the Li-ion and the active material for an extended period of time. As a result, the LICs exhibit initial capacities of approximately 42 F g−1, even at 60 A g−1. The LICs also exhibit good cycle performance up to approximately 15,000 cycles. In addition, these advancements allow for a considerably higher energy density than other existing capacitor systems. The energy density of the proposed LICs is approximately nine, two, and 1.5 times higher than those of the electrochemical double layer capacitor (EDLC), AC/LiMn2O4 hybrid capacitor, and intrinsic Si/AC LIC, respectively. PMID:24292725

Evaluating the performance of water purification in a vegetated groundwater recharge basin maintained by short-term pulsed infiltration events.

PubMed

Mindl, Birgit; Hofer, Julia; Kellermann, Claudia; Stichler, Willibald; Teichmann, Günter; Psenner, Roland; Danielopol, Dan L; Neudorfer, Wolfgang; Griebler, Christian

2015-01-01

Infiltration of surface water constitutes an important pillar in artificial groundwater recharge. However, insufficient transformation of organic carbon and nutrients, as well as clogging of sediments often cause major problems. The attenuation efficiency of dissolved organic carbon (DOC), nutrients and pathogens versus the risk of bioclogging for intermittent recharge were studied in an infiltration basin covered with different kinds of macrovegetation. The quality and concentration of organic carbon, major nutrients, as well as bacterial biomass, activity and diversity in the surface water, the porewater, and the sediment matrix were monitored over one recharge period. Additionally, the numbers of viral particles and Escherichia coli were assessed. Our study showed a fast establishment of high microbial activity. DOC and nutrients have sustainably been reduced within 1.2 m of sediment passage. Numbers of E. coli, which were high in the topmost centimetres of sediment porewater, dropped below the detection limit. Reed cover was found to be advantageous over bushes and trees, since it supported higher microbial activities along with a good infiltration and purification performance. Short-term infiltration periods of several days followed by a break of similar time were found suitable for providing high recharge rates, and good water purification without the risk of bioclogging.

9 CFR 3.50 - Facilities, general.

Code of Federal Regulations, 2011 CFR

2011-01-01

... WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment and Transportation of Rabbits... housing facilities for rabbits shall be structurally sound and shall be maintained in good repair, to...

The Nebula Standard Computer Architecture,

DTIC Science & Technology

good target for high level languages, the designers also adopted a visibility approach in architecture design that provides more freedom for the hardware implementor while still maintaining software portability. (Author)

Hierarchically porous carbon/polyaniline hybrid for use in supercapacitors.

PubMed

Joo, Min Jae; Yun, Young Soo; Jin, Hyoung-Joon

2014-12-01

A hierarchically porous carbon (HPC)/polyaniline (PANI) hybrid electrode was prepared by the polymerization of PANI on the surface of the HPC via rapid-mixing polymerization. The surface morphologies and chemical composition of the HPC/PANI hybrid electrode were characterized using transmission electron microscopy and X-ray photoelectron spectroscopy (XPS), respectively. The surface morphologies and XPS results for the HPC, PANI and HPC/PANI hybrids indicate that PANI is coated on the surface of HPC in the HPC/PANI hybrids which have two different nitrogen groups as a benzenoid amine (-NH-) peak and positively charged nitrogen (N+) peak. The electrochemical performances of the HPC/PANI hybrids were analyzed by performing cyclic voltammetry and galvanostatic charge-discharge tests. The HPC/PANI hybrids showed a better specific capacitance (222 F/g) than HPC (111 F/g) because of effect of pseudocapacitor behavior. In addition, good cycle stabilities were maintained over 1000 cycles.

Reduced Graphene Oxide/Carbon Nanotube Composites as Electrochemical Energy Storage Electrode Applications.

PubMed

Yang, Wenyao; Chen, Yan; Wang, Jingfeng; Peng, Tianjun; Xu, Jianhua; Yang, Bangchao; Tang, Ke

2018-06-15

We demonstrate an electrochemical reduction method to reduce graphene oxide (GO) to electrochemically reduced graphene oxide (ERGO) with the assistance of carbon nanotubes (CNTs). The faster and more efficient reduction of GO can be achieved after proper addition of CNTs into GO during the reduction process. This nanotube/nanosheet composite was deposited on electrode as active material for electrochemical energy storage applications. It has been found that the specific capacitance of the composite film was strongly affected by the mass ratio of GO/CNTs and the scanning ratio of cyclic voltammetry. The obtained ERGO/CNT composite electrode exhibited a 279.4 F/g-specific capacitance and showed good cycle rate performance with the evidence that the specific capacitance maintained above 90% after 6000 cycles. The synergistic effect between ERGO and CNTs as well as crossing over of CNTs into ERGO is attributed to the high electrochemical performance of composite electrode.

Impact of open-core threading dislocations on the performance of AlGaN metal-semiconductor-metal photodetectors

NASA Astrophysics Data System (ADS)

Walde, S.; Brendel, M.; Zeimer, U.; Brunner, F.; Hagedorn, S.; Weyers, M.

2018-04-01

The influence of open-core threading dislocations on the bias-dependent external quantum efficiency (EQE) of bottom-illuminated Al0.5Ga0.5N/AlN metal-semiconductor-metal (MSM) photodetectors (PDs) is presented. These defects originate at the Al0.5Ga0.5N/AlN interface and terminate on the Al0.5Ga0.5N surface as hexagonal prisms. They work as electrically active paths bypassing the Al0.5Ga0.5N absorber layer and therefore alter the behavior of the MSM PDs under bias voltage. This effect is included in the model of carrier collection in the MSM PDs showing a good agreement with the experimental data. While such dislocations usually limit the device performance, the MSM PDs benefit by high EQE at a reduced bias voltage while maintaining a low dark current.

Microcontroller-based real-time QRS detection.

PubMed

Sun, Y; Suppappola, S; Wrublewski, T A

1992-01-01

The authors describe the design of a system for real-time detection of QRS complexes in the electrocardiogram based on a single-chip microcontroller (Motorola 68HC811). A systematic analysis of the instrumentation requirements for QRS detection and of the various design techniques is also given. Detection algorithms using different nonlinear transforms for the enhancement of QRS complexes are evaluated by using the ECG database of the American Heart Association. The results show that the nonlinear transform involving multiplication of three adjacent, sign-consistent differences in the time domain gives a good performance and a quick response. When implemented with an appropriate sampling rate, this algorithm is also capable of rejecting pacemaker spikes. The eight-bit single-chip microcontroller provides sufficient throughput and shows a satisfactory performance. Implementation of multiple detection algorithms in the same system improves flexibility and reliability. The low chip count in the design also favors maintainability and cost-effectiveness.

Hierarchical porous poly (ether sulfone) membranes with excellent capacity retention for vanadium flow battery application

NASA Astrophysics Data System (ADS)

Chen, Dongju; Li, Dandan; Li, Xianfeng

2017-06-01

A hierarchical poly (ether sulfone) (PES) porous membrane is facilely fabricated via a hard template method for vanadium flow battery (VFB) application. The construction of this hierarchical porous membrane is prepared via removing templates (phenolphthalein). The pore size can be well controlled by optimizing the template content in the cast solution, ensuring the membrane conductivity and selectively. The prepared hierarchical porous membrane can combine high ion selectivity with high proton conductivity, which renders a good electrochemical performance in a VFB. The optimized hierarchical porous membrane shows a columbic efficiency of 94.52% and energy efficiency of 81.66% along with a superior ability to maintain stable capacity over extended cycling at a current density of 80 mA cm-2. The characteristics of low cost, proven chemical stability and high electrochemical performance afford the hierarchical PES porous membrane great prospect in VFB application.

Durability test with fuel starvation using a Pt/CNF catalyst in PEMFC.

PubMed

Jung, Juhae; Park, Byungil; Kim, Junbom

2012-01-05

In this study, a catalyst was synthesized on carbon nanofibers [CNFs] with a herringbone-type morphology. The Pt/CNF catalyst exhibited low hydrophilicity, low surface area, high dispersion, and high graphitic behavior on physical analysis. Electrodes (5 cm2) were prepared by a spray method, and the durability of the Pt/CNF was evaluated by fuel starvation. The performance was compared with a commercial catalyst before and after accelerated tests. The fuel starvation caused carbon corrosion with a reverse voltage drop. The polarization curve, EIS, and cyclic voltammetry were analyzed in order to characterize the electrochemical properties of the Pt/CNF. The performance of a membrane electrode assembly fabricated from the Pt/CNF was maintained, and the electrochemical surface area and cell resistance showed the same trend. Therefore, CNFs are expected to be a good support in polymer electrolyte membrane fuel cells.

Durability test with fuel starvation using a Pt/CNF catalyst in PEMFC

PubMed Central

2012-01-01

In this study, a catalyst was synthesized on carbon nanofibers [CNFs] with a herringbone-type morphology. The Pt/CNF catalyst exhibited low hydrophilicity, low surface area, high dispersion, and high graphitic behavior on physical analysis. Electrodes (5 cm2) were prepared by a spray method, and the durability of the Pt/CNF was evaluated by fuel starvation. The performance was compared with a commercial catalyst before and after accelerated tests. The fuel starvation caused carbon corrosion with a reverse voltage drop. The polarization curve, EIS, and cyclic voltammetry were analyzed in order to characterize the electrochemical properties of the Pt/CNF. The performance of a membrane electrode assembly fabricated from the Pt/CNF was maintained, and the electrochemical surface area and cell resistance showed the same trend. Therefore, CNFs are expected to be a good support in polymer electrolyte membrane fuel cells. PMID:22221426

Novel magnetic-fluorescent bifunctional Janus nanofiber membrane

NASA Astrophysics Data System (ADS)

Wang, Qiutong; Geng, Yuting; Li, Jianhao; Yin, Meizhen; Hu, Yiseng; Liu, Yangxiu; Pan, Kai

2018-04-01

Magnetic-fluorescent bifunctional materials have received global attention owing to their potential in many fields. Herein, we reported a novel magnetic-fluorescent bifunctional Janus nanofiber membrane (NFM) by adding the as-prepared magnetic CoFe2O4 nanoparticles into the polyacrylonitrile (PAN) side (m-PAN) and the fluorescent molecules of 1,8-naphthalene anhydride (1,8-NAD) into the polyvinylpyrrolidone (PVP) side (f-PVP) via electrospinning method. The obtained m-PAN/f-PVP Janus NFM exhibited excellent magnetic performance and high fluorescent properties due to the unique structure. Compared with the m-PAN/f-PVP composite NFM, the Janus NFM showed higher fluorescent performance because the fluorescent molecules were isolated from the magnetic nanoparticles. In addition, the Janus NFM not only maintain the good self-supporting state in water but also realize a directional movement attracted by a magnet. The unique structure of Janus nanofiber is of great importance and demonstrates great potential applications.

In Situ Synthesis of Vertical Standing Nanosized NiO Encapsulated in Graphene as Electrodes for High-Performance Supercapacitors.

PubMed

Lin, Jinghuang; Jia, Henan; Liang, Haoyan; Chen, Shulin; Cai, Yifei; Qi, Junlei; Qu, Chaoqun; Cao, Jian; Fei, Weidong; Feng, Jicai

2018-03-01

NiO is a promising electrode material for supercapacitors. Herein, the novel vertically standing nanosized NiO encapsulated in graphene layers (G@NiO) are rationally designed and synthesized as nanosheet arrays. This unique vertical standing structure of G@NiO nanosheet arrays can enlarge the accessible surface area with electrolytes, and has the benefits of short ion diffusion path and good charge transport. Further, an interconnected graphene conductive network acts as binder to encapsulate the nanosized NiO particles as core-shell structure, which can promote the charge transport and maintain the structural stability. Consequently, the optimized G@NiO hybrid electrodes exhibit a remarkably enhanced specific capacity up to 1073 C g -1 and excellent cycling stability. This study provides a facial strategy to design and construct high-performance metal oxides for energy storage.

Epitaxial solar cells fabrication

NASA Technical Reports Server (NTRS)

Daiello, R. V.; Robinson, P. H.; Kressel, H.

1975-01-01

Silicon epitaxy has been studied for the fabrication of solar cell structures, with the intent of optimizing efficiency while maintaining suitability for space applications. SiH2CL2 yielded good quality layers and junctions with reproducible impurity profiles. Diode characteristics and lifetimes in the epitaxial layers were investigated as a function of epitaxial growth conditions and doping profile, as was the effect of substrates and epitaxial post-gettering on lifetime. The pyrolytic decomposition of SiH4 was also used in the epitaxial formation of highly doped junction layers on bulk Si wafers. The effects of junction layer thickness and bulk background doping level on cell performance, in particular, open-circuit voltage, were investigated. The most successful solar cells were fabricated with SiH2 CL2 to grow p/n layers on n(+) substrates. The best performance was obtained from a p(+)/p/n/n(+) structure grown with an exponential grade in the n-base layer.

Low-Dimensional Feature Representation for Instrument Identification

NASA Astrophysics Data System (ADS)

Ihara, Mizuki; Maeda, Shin-Ichi; Ikeda, Kazushi; Ishii, Shin

For monophonic music instrument identification, various feature extraction and selection methods have been proposed. One of the issues toward instrument identification is that the same spectrum is not always observed even in the same instrument due to the difference of the recording condition. Therefore, it is important to find non-redundant instrument-specific features that maintain information essential for high-quality instrument identification to apply them to various instrumental music analyses. For such a dimensionality reduction method, the authors propose the utilization of linear projection methods: local Fisher discriminant analysis (LFDA) and LFDA combined with principal component analysis (PCA). After experimentally clarifying that raw power spectra are actually good for instrument classification, the authors reduced the feature dimensionality by LFDA or by PCA followed by LFDA (PCA-LFDA). The reduced features achieved reasonably high identification performance that was comparable or higher than those by the power spectra and those achieved by other existing studies. These results demonstrated that our LFDA and PCA-LFDA can successfully extract low-dimensional instrument features that maintain the characteristic information of the instruments.

Effect of Storage on Performance of Super Nickel-Cadmium Cells

NASA Technical Reports Server (NTRS)

Vaidyanathan, Hari; Rao, Gopalakrishna M.

1997-01-01

A study was undertaken to examine the capacity maintenance features of SUPER nickel-cadmium cells when stored for extended periods to determine whether the features change when the same kinds of positive plates as that used in nickel-hydrogen cells are used, The cells maintained their capacity when stored at 0 C in the discharged state and at 0 C in the charged state by continuously trickle charging. There was a capacity loss when stored in the open-circuit condition at 28 C. A cycling test at 17% depth of discharge for 2400 cycles using cells stored at various conditions showed that cells maintained good end of discharge voltage regardless of their storage history. However, the EOD voltages of stored cells were lower by 10 mV compared to those of fresh cells. The capacity at the end of the cycling test decreased for the stored cells by 2-7 Ah. The storage related capacity loss is lower for SUPER Ni-Cd cells compared to that of Ni-H2 cells containing a hydrogen precharge. The results suggest the pivotal role of hydrogen pressure in the capacity loss phenomenon.

Remodeling of alveolar bone crest after molar intrusion with skeletal anchorage system in dogs.

PubMed

Kanzaki, Reiko; Daimaruya, Takayoshi; Takahashi, Ichiro; Mitani, Hideo; Sugawara, Junji

2007-03-01

The aim of this study was to clarify the influence of supra-alveolar fibers on alveolar bone crest remodeling when several teeth are intruded simultaneously. The skeletal anchorage system was used to bilaterally intrude the second and third premolars of 10 beagles; supracrestal fiberotomies were performed on 1 side only. The amount of intrusion was greater and the amount of alveolar bone resorption was smaller in the fiberotomy group compared with the nonfiberotomy group. The health status (pocket depth <3 mm) of the dentogingival unit was maintained in the nonfiberotomy group during the experimental period. In the fiberotomy group, the number of osteoclasts on the marginal alveolar crest was less than in the nonfiberotomy group. The dense fiber bundles connecting the second and third premolars and the gingival attachments were maintained in the nonfiberotomy group. Pressure from the supra-alveolar fibers generated by segmental molar intrusion with the skeletal anchorage system induced alveolar bone crest resorption and remodeling, and, as a result, it prevented deepening of the gingival pocket. Periodontal status was good during tooth intrusion.

Proper Generalized Decomposition (PGD) for the numerical simulation of polycrystalline aggregates under cyclic loading

NASA Astrophysics Data System (ADS)

Nasri, Mohamed Aziz; Robert, Camille; Ammar, Amine; El Arem, Saber; Morel, Franck

2018-02-01

The numerical modelling of the behaviour of materials at the microstructural scale has been greatly developed over the last two decades. Unfortunately, conventional resolution methods cannot simulate polycrystalline aggregates beyond tens of loading cycles, and they do not remain quantitative due to the plasticity behaviour. This work presents the development of a numerical solver for the resolution of the Finite Element modelling of polycrystalline aggregates subjected to cyclic mechanical loading. The method is based on two concepts. The first one consists in maintaining a constant stiffness matrix. The second uses a time/space model reduction method. In order to analyse the applicability and the performance of the use of a space-time separated representation, the simulations are carried out on a three-dimensional polycrystalline aggregate under cyclic loading. Different numbers of elements per grain and two time increments per cycle are investigated. The results show a significant CPU time saving while maintaining good precision. Moreover, increasing the number of elements and the number of time increments per cycle, the model reduction method is faster than the standard solver.

9 CFR 3.5 - Mobile or traveling housing facilities.

Code of Federal Regulations, 2014 CFR

2014-01-01

... temperatures, for those breeds that cannot tolerate lower temperatures without stress or discomfort (such as... sufficient illumination to aid in maintaining good housekeeping practices, adequate cleaning, adequate...

9 CFR 3.5 - Mobile or traveling housing facilities.

Code of Federal Regulations, 2012 CFR

2012-01-01

... temperatures, for those breeds that cannot tolerate lower temperatures without stress or discomfort (such as... sufficient illumination to aid in maintaining good housekeeping practices, adequate cleaning, adequate...

9 CFR 3.5 - Mobile or traveling housing facilities.

Code of Federal Regulations, 2013 CFR

2013-01-01

... temperatures, for those breeds that cannot tolerate lower temperatures without stress or discomfort (such as... sufficient illumination to aid in maintaining good housekeeping practices, adequate cleaning, adequate...

Food Choices for Good Health [and] Children and Weight: What's a Parent To Do?

ERIC Educational Resources Information Center

Ikeda, Joanne P.; Mitchell, Rita

These two publications offer parents information on food choices for children and children's weight. The first publication is a guide that lists, for each of the five food groups, which foods should be eaten often, sometimes, or rarely in order to maintain good health. The food groups are: (1) milk and milk products; (2) meats, poultry, fish,…

Helical prospective ECG-gating in cardiac computed tomography: radiation dose and image quality.

PubMed

DeFrance, Tony; Dubois, Eric; Gebow, Dan; Ramirez, Alex; Wolf, Florian; Feuchtner, Gudrun M

2010-01-01

Helical prospective ECG-gating (pECG) may reduce radiation dose while maintaining the advantages of helical image acquisition for coronary computed tomography angiography (CCTA). Aim of this study was to evaluate helical pECG-gating in CCTA in regards to radiation dose and image quality. 86 patients undergoing 64-multislice CCTA were enrolled. pECG-gating was performed in patients with regular heart rates (HR) < 65 bpm; with the gating window set at 70-85% of the cardiac cycle. All patients received oral and some received additional IV beta-blockers to achieve HR < 65 bpm. In patients with higher or irregular HR, or for functional evaluation, retrospective ECG-gating (rECG) was performed. The average X-ray dose was estimated from the dose length product. Each arterial segment (modified AHA/ACC 17-segment-model) was evaluated on a 4-point image quality scale (4 = excellent; 3 = good, mild artefact; 2 = acceptable, some artefact, 1 = uninterpretable). pECG-gating was applied in 57 patients, rECG-gating in 29 patients. There was no difference in age, gender, body mass index, scan length or tube output settings between both groups. HR in the pECG-group was 54.7 bpm (range, 43-64). The effective radiation dose was significantly lower for patients scanned with pECG-gating with mean 6.9 mSv +/- 1.9 (range, 2.9-10.7) compared to rECG with 16.9 mSv +/- 4.1 (P < 0.001), resulting in a mean dose reduction of 59.2%. For pECG-gating, out of 969 coronary segments, 99.3% were interpretable. Image quality was excellent in 90.2%, good in 7.8%, acceptable in 1.3% and non-interpretable in 0.7% (n = 7 segments). For patients with steady heart rates <65 bpm, helical prospective ECG-gating can significantly lower the radiation dose while maintaining high image quality.

The BASES expert statement on emotion regulation in sport.

PubMed

Lane, Andrew M; Beedie, Chris J; Jones, Marc V; Uphill, Mark; Devonport, Tracey J

2012-01-01

Emotions experienced before and during sports competition have been found to influence sports performance. Emotion regulation is defined as the automatic or deliberate use of strategies to initiate, maintain, modify or display emotions (Gross & Thompson, 2007) and is proposed to occur when a discrepancy exists between current and desired emotions. Two distinct motivations to regulate emotion - hedonic and instrumental (in short, for pleasure or for purpose) - have been proposed (Tamir, 2009). The instrumental approach might provide a more fruitful area of investigation for sports researchers as some athletes hold beliefs that supposedly pleasant emotions such as happiness and calmness associate with poor performance and supposedly unpleasant emotions such as anxiety and anger associate with good performance (Hanin, 2010). Athletes are more likely to try to regulate an emotion if they believe that doing so will facilitate performance. Strategies that encourage re-appraisal of factors that trigger emotions are proposed to be preferable. In this British Association of Sport and Exercise Sciences (BASES) expert statement, a summary of the key theoretical issues are offered leading to evidence-based recommendations for practitioners and researchers.

High performance binder-free SiO x/C composite LIB electrode made of SiO x and lignin

DOE PAGES

Chen, Tao; Hu, Jiazhi; Zhang, Long; ...

2017-07-19

A high performance binder-free SiO x/C composite electrode was synthesized by mixing SiO x particles and Kraft lignin in a cryo-mill followed by heat treatment at 600 °C. After the heat treatment, lignin formed a conductive matrix hosting SiO x particles, ensuring electronic conductivity, connectivity, and accommodation of volume changes during lithiation/delithiation. As the result, no conventional binder or conductive agent was necessary. When electrochemically cycled, the composite electrode delivered excellent performance, maintaining ~900 mAh g -1 after 250 cycles at a rate of 200 mA g -1, and good rate capability. The robustness of the electrode was also examinedmore » by post-cycling SEM images, where few cracks were observed. The excellent electrochemical performance can be attributed to the comparatively small volume change of SiO x-based electrodes (160%) and the flexibility of the lignin derived carbon matrix to accommodate the volume change. In conclusion, this work should stimulate further interests in using bio-renewable resources in making advanced electrochemical energy storage systems.« less

Ultrafast surface modification of Ni3S2 nanosheet arrays with Ni-Mn bimetallic hydroxides for high-performance supercapacitors.

PubMed

Zou, Xu; Sun, Qing; Zhang, Yuxin; Li, Guo-Dong; Liu, Yipu; Wu, Yuanyuan; Yang, Lan; Zou, Xiaoxin

2018-03-14

Amorphous Ni-Mn bimetallic hydroxide film on the three-dimensional nickle foam (NF)-supported conductive Ni 3 S 2 nanosheets (denoted as Ni-Mn-OH@Ni 3 S 2 /NF) is successfully synthesized by an ultrafast process (5 s). The fascinating structural characteristic endows Ni-Mn-OH@Ni 3 S 2 /NF electrodes better electrochemical performance. The specific capacitance of 2233.3 F g -1 at a current density of 15 A g -1 can achieve high current density charge and discharge at 20/30 A g -1 that the corresponding capacitance is 1529.16 and 1350 F g -1 , respectively. As well as good cycling performance after 1000 cycles can maintain 72% at 15 A g -1 . The excellent performance can be attributed to unique surface modification nanostructures and the synergistic effect of the bimetallic hydroxide film. The impressive results provide new opportunity to produce advanced electrode materials by simple and green route and this material is expected to apply in high energy density storage systems.

High performance binder-free SiO x/C composite LIB electrode made of SiO x and lignin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Tao; Hu, Jiazhi; Zhang, Long

A high performance binder-free SiO x/C composite electrode was synthesized by mixing SiO x particles and Kraft lignin in a cryo-mill followed by heat treatment at 600 °C. After the heat treatment, lignin formed a conductive matrix hosting SiO x particles, ensuring electronic conductivity, connectivity, and accommodation of volume changes during lithiation/delithiation. As the result, no conventional binder or conductive agent was necessary. When electrochemically cycled, the composite electrode delivered excellent performance, maintaining ~900 mAh g -1 after 250 cycles at a rate of 200 mA g -1, and good rate capability. The robustness of the electrode was also examinedmore » by post-cycling SEM images, where few cracks were observed. The excellent electrochemical performance can be attributed to the comparatively small volume change of SiO x-based electrodes (160%) and the flexibility of the lignin derived carbon matrix to accommodate the volume change. In conclusion, this work should stimulate further interests in using bio-renewable resources in making advanced electrochemical energy storage systems.« less

Dual Frequency Head Maps: A New Method for Indexing Mental Workload Continuously during Execution of Cognitive Tasks

PubMed Central

Radüntz, Thea

2017-01-01

One goal of advanced information and communication technology is to simplify work. However, there is growing consensus regarding the negative consequences of inappropriate workload on employee's health and the safety of persons. In order to develop a method for continuous mental workload monitoring, we implemented a task battery consisting of cognitive tasks with diverse levels of complexity and difficulty. We conducted experiments and registered the electroencephalogram (EEG), performance data, and the NASA-TLX questionnaire from 54 people. Analysis of the EEG spectra demonstrates an increase of the frontal theta band power and a decrease of the parietal alpha band power, both under increasing task difficulty level. Based on these findings we implemented a new method for monitoring mental workload, the so-called Dual Frequency Head Maps (DFHM) that are classified by support vectors machines (SVMs) in three different workload levels. The results are in accordance with the expected difficulty levels arising from the requirements of the tasks on the executive functions. Furthermore, this article includes an empirical validation of the new method on a secondary subset with new subjects and one additional new task without any adjustment of the classifiers. Hence, the main advantage of the proposed method compared with the existing solutions is that it provides an automatic, continuous classification of the mental workload state without any need for retraining the classifier—neither for new subjects nor for new tasks. The continuous workload monitoring can help ensure good working conditions, maintain a good level of performance, and simultaneously preserve a good state of health. PMID:29276490

Feeding value of pastures for ruminants.

PubMed

Waghorn, G C; Clark, D A

2004-12-01

Perennial ryegrass is the primary forage component of ruminant diets in New Zealand. It is persistent and palatable, and immature ryegrass has a high nutritive value (NV). However, seedhead development substantially lowers its feeding value (FV) as fibre concentration increases, the rate and extent of digestibility decreases, and voluntary intake declines. Ryegrass pastures are susceptible to accumulation of endophytic and saprophytic fungi in dead material at the base of the sward, especially when mature and laxly grazed. Feeding forage legumes to ruminants grazing grass-dominant pastures will improve animal performance and lessen the reliance on a single species to meet all nutritional requirements. The FV of forage is a function of intake and NV, measured by chemical analyses and animal feeding trials. Performance of individual animals grazing forages is usually limited by energy intake because structural fibre can slow digestion and clearance from the rumen and because of competition between individuals for available feed. The use of metabolisable energy (ME) content of forage to signify FV can give a reasonable indication of animal performance, but it should be used in conjunction with chemical analyses to improve the accuracy of predictions. The relationship between FV, pasture production, animal performance and profitability is complex. The importance of skilled management to maintain pasture quality and optimise animal performance under inconsistent climatic conditions should not be underestimated. Acceptable animal performance with minimal veterinary intervention requires good nutrition, but the genetic potential of livestock in New Zealand cannot be met solely by grazing pasture, especially when a high utilisation of pasture is required to maintain quality and profitability. Producers are responding to industry demands to reduce the seasonality in supply of milk and meat by changing lambing and calving dates, and extending lactation length in dairy cows. Social changes include adoption of once-daily milking in the dairy industry. Some changes have necessitated increased use of supplements and others can be met by feeding forages with a higher FV than ryegrass, all of which require an improved knowledge of feed quality. This information is available through rapid and inexpensive near infrared spectroscopy (NIRS) analysis, enabling animal nutritional needs to be balanced by appropriate nutrient supply. It is essential that producers continue to improve animal welfare, limit excessive use of fertilisers and meet the demands of overseas consumers. Good nutrition, with an increased use of legumes and other forages to complement ryegrass pastures, will enable these objectives to be achieved.

Gibbsian segregating alloys driven by thermal and concentration gradients: A potential grazing collector optics used in EUV lithography

NASA Astrophysics Data System (ADS)

Qiu, Huatan

A critical issue for EUV lithography is the minimization of collector degradation from intense plasma erosion and debris deposition. Reflectivity and lifetime of the collector optics will be heavily dependent on surface chemistry interactions between fuels and various mirror materials, in addition to high-energy ion and neutral particle erosion effects. An innovative Gibbsian segregation (GS) concept has been developed for being a self-healing, erosion-resistant collector optics. A Mo-Au GS alloy is developed on silicon using a DC dual-magnetron co-sputtering system in order for enhanced surface roughness properties, erosion resistance, and self-healing characteristics to maintain reflectivity over a longer period of mirror lifetime. A thin Au segregating layer will be maintained through segregation during exposure, even though overall erosion is taking place. The reflective material, Mo, underneath the segregating layer will be protected by this sacrificial layer which is lost due to preferential sputtering. The two dominant driving forces, thermal (temperature) and surface concentration gradient (surface removal flux), are the focus of this work. Both theoretical and experimental efforts have been performed to prove the effectiveness of the GS alloy used as EUV collection optics, and to elucidate the underlying physics behind it. The segregation diffusion, surface balance, erosion, and in-situ reflectivity will be investigated both qualitatively and quantitatively. Results show strong enhancement effect of temperature on GS performance, while only a weak effect of surface removal rate on GS performance. When equilibrium between GS and erosion is reached, the surface smoothness could be self-healed and reflectivity could be maintained at an equilibrium level, instead of continuously dropping down to an unacceptable level as conventional optic mirrors behave. GS process also shows good erosion resistance. The effectiveness of GS alloy as EUV mirror is dependent on the temperature and surface removal rate. The Mo-Au GS alloy could be effective at elevated temperature as the potential grazing mirror as EUV collector optics.

[A case of obstruction due to right-sided colon cancer in which good quality of life was achieved after colonic stenting].

PubMed

Nakao, Shigetomi; Hori, Takeshi; Miura, Kotaro; Tendo, Masashige; Nakata, Bunzo; Ishikawa, Tetsuro; Hirakawa, Kosei

2013-11-01

We report a case of a 60-year-old woman with abdominal distension who was treated with self-expandable metal stent (SEMS) placement in the proximal transverse colon. She was found to have severe bowel obstruction due to advanced transverse colon cancer on plain computed tomography (CT) and colonoscopy. We performed colonic stenting safely, and the symptom promptly improved. Defecation and flatus were observed on the same day of stenting, and the patient was able to start drinking and eating on the next day. Enhanced abdominal CT revealed multiple liver metastasis, peritoneal dissemination, ascites, and cystic ovarian tumor. After treatment with 1 course of 5-fluorouracil, Leucovorin, and oxaliplatin (mFOLFOX6), the patient was discharged on day 14 after admission. The rapidly enlarging ovarian tumors and primary colonic lesion with SEMS were surgically removed after treatment with mFOLFOX6 for 4 months in an outpatient basis. The patient has been alive with a good quality of life (QOL) and being treated with bevacizumab plus mFOLFOX6/Leucovorin, 5-fluorouracil, and irinotecan( FOLFIRI) for 6 months. SEMS placement could be safe and effective for the treatment of obstruction of the right colon, and could maintain a good QOL in patients.

Double ion production in mercury thrusters. M.S. Thesis

NASA Technical Reports Server (NTRS)

Peters, R. R.

1976-01-01

The development of a model which predicts doubly charged ion density is discussed. The accuracy of the model is shown to be good for two different thruster sizes and a total of 11 different cases. The model indicates that in most cases more than 80% of the doubly charged ions are produced from singly charged ions. This result can be used to develop a much simpler model which, along with correlations of the average plasma properties, can be used to determine the doubly charged ion density in ion thrusters with acceptable accuracy. Two different techniques which can be used to reduce the doubly charged ion density while maintaining good thruster operation, are identified as a result of an examination of the simple model. First, the electron density can be reduced and the thruster size then increased to maintain the same propellant utilization. Second, at a fixed thruster size, the plasma density, temperature and energy can be reduced and then to maintain a constant propellant utilization the open area of the grids to neutral propellant loss can be reduced through the use of a small hole accelerator grid.

Revisiting the Role of Bad News in Maintaining Human Observing Behavior

PubMed Central

Fantino, Edmund; Silberberg, Alan

2010-01-01

Results from studies of observing responses have suggested that stimuli maintain observing owing to their special relationship to primary reinforcement (the conditioned-reinforcement hypothesis), and not because they predict the availability and nonavailability of reinforcement (the information hypothesis). The present article first reviews a study that challenges that conclusion and then reports a series of five brief experiments that provide further support for the conditioned-reinforcement view. In Experiments 1 through 3, participants preferred occasional good news (a stimulus correlated with reinforcement) or no news (a stimulus uncorrelated with reinforcement) to occasional bad news (a stimulus negatively correlated with reinforcement). In Experiment 4 bad news was preferred to no news when the absence of stimulus change following a response to the bad-news option was reliably associated with good news. When this association was weakened in Experiment 5 the results were intermediate. The results support the conclusion that information is reinforcing only when it is positive or useful. As required by the conditioned-reinforcement hypothesis, useless information does not maintain observing. PMID:20885808

Physiological Plasticity Is Important for Maintaining Sugarcane Growth under Water Deficit

PubMed Central

Marchiori, Paulo E. R.; Machado, Eduardo C.; Sales, Cristina R. G.; Espinoza-Núñez, Erick; Magalhães Filho, José R.; Souza, Gustavo M.; Pires, Regina C. M.; Ribeiro, Rafael V.

2017-01-01

The water availability at early phenological stages is critical for crop establishment and sugarcane varieties show differential performance under drought. Herein, we evaluated the relative importance of morphological and physiological plasticity of young sugarcane plants grown under water deficit, testing the hypothesis that high phenotypic plasticity is associated with drought tolerance. IACSP95-5000 is a high yielding genotype and IACSP94-2094 has good performance under water limiting environments. Plants were grown in rhizotrons for 35 days under three water availabilities: high (soil water matric potential [Ψm] higher than -20 kPa); intermediate (Ψm reached -65 and -90 kPa at the end of experimental period) and low (Ψm reached values lower than -150 kPa). Our data revealed that morphological and physiological responses of sugarcane to drought are dependent on genotype and intensity of water deficit. In general, IACSP95-5000 showed higher physiological plasticity given by leaf gas exchange and photochemical traits, whereas IACSP94-2094 showed higher morphological plasticity determined by changes in leaf area (LA) and specific LA. As IACSP94-2094 accumulated less biomass than IACSP95-5000 under varying water availability, it is suggested that high morphological plasticity does not always represent an effective advantage to maintain plant growth under water deficit. In addition, our results revealed that sugarcane varieties face water deficit using distinct strategies based on physiological or morphological changes. When the effectiveness of those changes in maintaining plant growth under low water availability is taken into account, our results indicate that the physiological plasticity is more important than the morphological one in young sugarcane plants. PMID:29326744

[Evaluation on running status of Chinese Polio Laboratories Network in 2008].

PubMed

Zhu, Shuang-li; Yan, Dong-mei; Zhu, Hui

2010-04-01

In order to evaluate the running status and provide the laboratory data for maintaining polio-free status in China, the virology surveillance database of Chinese Polio Laboratories Network (not include Hong Kong, Macao, and Taiwan)in 2008 were analyzed. The case investigation data of Acute Flaccid Paralysis(AFP)cases reported by 31 provinces (municipal, autonomous regions) through EPI surveillance information management system and the database of National Polio Laboratory (NPL) were analyzed, and the indicators of running status of Chinese Polio Laboratories Network were evaluated. 10,116 stool samples were collected from 5116 AFP cases by Chinese Polio Laboratories Network in 2008, and viral isolation and identification of all stool samples were done according to 4th World Health Organization (WHO) Polio Laboratory Manual. The rate of viral isolation and identification performed within 28d was 94.9%. 189 polioviruses (PV) and 597 of non-polio enteroviruses (NPEV) were isolated from AFP cases, the isolatien rates were 3.72% and 11.74% respectively. 251 polio positive isolates were sent to NPL from 31 provincial polio laboratories. There were 318 single serotype PVs were performed VPI sequencing. And no wild polioviruses and Vaccine-derived Polioviruses (VDPVs) were found in 2008. NPL passed the proficiency test and got full accreditation for on-site review by WHO experts in 2008. All 31 provincial Polio laboratories passed the proficiency test with the same panel as NPL, and 13 provincial Polio laboratories joined and passed the on-site review by WHO experts. The running status of Chinese Polio Laboratories Network was good, polio-free status was maintained in China in 2008. The Chinese polio laboratories network running is normaly, the laboratory surveillance system was sensitive and laboratory data were provided for maintaining the polio-free status in China.

Efficient parallel implicit methods for rotary-wing aerodynamics calculations

NASA Astrophysics Data System (ADS)

Wissink, Andrew M.

Euler/Navier-Stokes Computational Fluid Dynamics (CFD) methods are commonly used for prediction of the aerodynamics and aeroacoustics of modern rotary-wing aircraft. However, their widespread application to large complex problems is limited lack of adequate computing power. Parallel processing offers the potential for dramatic increases in computing power, but most conventional implicit solution methods are inefficient in parallel and new techniques must be adopted to realize its potential. This work proposes alternative implicit schemes for Euler/Navier-Stokes rotary-wing calculations which are robust and efficient in parallel. The first part of this work proposes an efficient parallelizable modification of the Lower Upper-Symmetric Gauss Seidel (LU-SGS) implicit operator used in the well-known Transonic Unsteady Rotor Navier Stokes (TURNS) code. The new hybrid LU-SGS scheme couples a point-relaxation approach of the Data Parallel-Lower Upper Relaxation (DP-LUR) algorithm for inter-processor communication with the Symmetric Gauss Seidel algorithm of LU-SGS for on-processor computations. With the modified operator, TURNS is implemented in parallel using Message Passing Interface (MPI) for communication. Numerical performance and parallel efficiency are evaluated on the IBM SP2 and Thinking Machines CM-5 multi-processors for a variety of steady-state and unsteady test cases. The hybrid LU-SGS scheme maintains the numerical performance of the original LU-SGS algorithm in all cases and shows a good degree of parallel efficiency. It experiences a higher degree of robustness than DP-LUR for third-order upwind solutions. The second part of this work examines use of Krylov subspace iterative solvers for the nonlinear CFD solutions. The hybrid LU-SGS scheme is used as a parallelizable preconditioner. Two iterative methods are tested, Generalized Minimum Residual (GMRES) and Orthogonal s-Step Generalized Conjugate Residual (OSGCR). The Newton method demonstrates good parallel performance on the IBM SP2, with OS-GCR giving slightly better performance than GMRES on large numbers of processors. For steady and quasi-steady calculations, the convergence rate is accelerated but the overall solution time remains about the same as the standard hybrid LU-SGS scheme. For unsteady calculations, however, the Newton method maintains a higher degree of time-accuracy which allows tbe use of larger timesteps and results in CPU savings of 20-35%.

49 CFR 234.245 - Signs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Maintenance Standards § 234.245 Signs. Each sign mounted on a highway-rail grade crossing signal post shall be maintained in good condition and be visible to the highway user. Inspections and Tests ...

7 CFR 58.421 - Press.

Code of Federal Regulations, 2014 CFR

2014-01-01

... openings readily cleanable. The pressure device shall be the continuous type. Press cloths shall be maintained in good repair and in a sanitary condition. Single service press cloths shall be used only once. ...

7 CFR 58.421 - Press.

Code of Federal Regulations, 2010 CFR

2010-01-01

... openings readily cleanable. The pressure device shall be the continuous type. Press cloths shall be maintained in good repair and in a sanitary condition. Single service press cloths shall be used only once. ...

7 CFR 58.421 - Press.

Code of Federal Regulations, 2013 CFR

2013-01-01

... openings readily cleanable. The pressure device shall be the continuous type. Press cloths shall be maintained in good repair and in a sanitary condition. Single service press cloths shall be used only once. ...

7 CFR 58.421 - Press.

Code of Federal Regulations, 2012 CFR

2012-01-01

... openings readily cleanable. The pressure device shall be the continuous type. Press cloths shall be maintained in good repair and in a sanitary condition. Single service press cloths shall be used only once. ...

7 CFR 58.421 - Press.

Code of Federal Regulations, 2011 CFR

2011-01-01

... openings readily cleanable. The pressure device shall be the continuous type. Press cloths shall be maintained in good repair and in a sanitary condition. Single service press cloths shall be used only once. ...

7 CFR 1942.104 - Application processing.

Code of Federal Regulations, 2012 CFR

2012-01-01

... needed and generally try to develop and maintain a cooperative working relationship with the applicant... applicant has in good faith exercised any right under the Consumer Credit Protection Act. The Federal agency...

7 CFR 1942.104 - Application processing.

Code of Federal Regulations, 2013 CFR

2013-01-01

... needed and generally try to develop and maintain a cooperative working relationship with the applicant... applicant has in good faith exercised any right under the Consumer Credit Protection Act. The Federal agency...

7 CFR 1942.104 - Application processing.

Code of Federal Regulations, 2014 CFR

2014-01-01

... needed and generally try to develop and maintain a cooperative working relationship with the applicant... applicant has in good faith exercised any right under the Consumer Credit Protection Act. The Federal agency...

7 CFR 1942.104 - Application processing.

Code of Federal Regulations, 2011 CFR

2011-01-01

... needed and generally try to develop and maintain a cooperative working relationship with the applicant... applicant has in good faith exercised any right under the Consumer Credit Protection Act. The Federal agency...

29 CFR 1917.127 - Sanitation.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Washing and toilet facilities shall be regularly cleaned and maintained in good order. (b) Drinking water... containers shall be clean, containing only water and ice, and shall be fitted with covers. (3) Common...

29 CFR 1918.95 - Sanitation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... cleaned and maintained in good order. (b) Drinking water. (1) Potable drinking water shall be accessible... water and ice, and shall be fitted with covers. (3) Common drinking cups are prohibited. (c) Prohibited...

29 CFR 1917.127 - Sanitation.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Washing and toilet facilities shall be regularly cleaned and maintained in good order. (b) Drinking water... containers shall be clean, containing only water and ice, and shall be fitted with covers. (3) Common...

29 CFR 1918.95 - Sanitation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... cleaned and maintained in good order. (b) Drinking water. (1) Potable drinking water shall be accessible... water and ice, and shall be fitted with covers. (3) Common drinking cups are prohibited. (c) Prohibited...

Performance of a completely autotrophic nitrogen removal over nitrite process for treating wastewater with different substrates at ambient temperature.

PubMed

Chang, Xiaoyan; Li, Dong; Liang, Yuhai; Yang, Zhuo; Cui, Shaoming; Liu, Tao; Zeng, Huiping; Zhang, Jie

2013-04-01

The stability and parameters of a bio-ceramic filter for completely autotrophic nitrogen removal were investigated. The completely autotrophic nitrogen removal over nitrite (CANON) reactor was fed with different concentrations of ammonia (400, 300, and 200 mg N/L) but constant influent ammonia load. The results showed that the CANON system can achieve good treatment performance at ambient temperature (15-23 degrees C). The average removal rate and removal loading of NH4(+)-N and TN was 83.90%, 1.26 kg N/(m3 x day), and 70.14%, 1.09 kg N/(m3 x day), respectively. Among the influencing factors like pH, dissolved oxygen and alkalinity, it was indicated that the pH was the key parameter of the performance of the CANON system. Observing the variation of pH would contribute to better control of the CANON system in an intuitive and fast way. Denaturing gradient gel electrophoresis analysis of microorganisms further revealed that there were some significant changes in the community structure of ammonium oxidizing bacteria, which had low diversity in different stages, while the species of anaerobic ammonium oxidizing (anammox) bacteria were fewer and the community composition was relatively stable. These observations showed that anaerobic ammonia oxidation was more stable than the aerobic ammonia oxidation, which could explain that why the CANON system maintained a good removal efficiency under the changing substrate conditions.

Performance of the RAPS4/RAPS4-QF for DSM-5 compared to DSM-IV alcohol use disorders in the general population: Data from the 2000-2010 National Alcohol Surveys.

PubMed

Cherpitel, Cheryl J; Ye, Yu

2015-06-01

A number of relatively short screening instruments have been developed for identifying alcohol use disorders (AUD), but performance has been evaluated against the standard Diagnostic and Statistical Manual of Mental and Behavior Disorders (DSM) criteria, and it is not known how screening instruments may perform based on the newly formulated DSM-5 criteria, which is a radical departure from previous versions of the DSM. Analyzed here is the performance of the RAPS4/RAPS4-QF against DSM-5 criteria for AUD compared to DSM-IV dependence and abuse criteria. Sensitivity and specificity are analyzed in a merged sample of 21,386 respondents from three National Alcohol Surveys of the U.S. general population (2000, 2005, 2010). Sensitivity of the RAPS4 was lower for DSM-5 AUD (62.5%) than for DSM-IV dependence (88%), while the RAPS4-QF was higher for DSM-5 AUD (90.3%) than for DSM-IV abuse (81.3%), or abuse/dependence (85.8%), while maintaining good specificity (84%). Sensitivity of the RAPS4-QF was higher for males (92%) compared to females (86.6%) and highest for whites (93.8%) followed by Hispanics (84.2%) and blacks (82.4%). Screening instruments may not perform similarly for DSM-5 as for DSM-IV AUD, and data here suggest the RAPS4-QF may be a good instrument choice for identifying those meeting criteria for DSM-5 AUD. These data also suggest the need for additional research and a similar evaluation of other commonly used screening instruments for DSM-5 AUD. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Trainee and training issues.

PubMed

Redfern, Nancy; Bartley, Catherine

2006-12-01

This chapter deals with the obligations of trainers and trainees to each other, the responsibilities of the programme and the conflicts of providing a service while training. Management of trainees with differing needs, such as those working part-time or returning to training after sickness, is reviewed. Assessment of performance and the obligation of consultants to identify, manage and support struggling trainees are discussed. Ethical discussion is based on the principles of autonomy, non-maleficence, beneficence, and justice to which fidelity is added. Case studies illustrating the application of ethical principles to work and decision-making are presented to stimulate debate. Opinions vary as to which principle carries more weight in individual cases, and how best to balance the conflicting requirements of the parties involved (patient, trainee,.trainer, employer, society). For all healthcare practitioners, the needs of patients remain our first concern. Acting in a consequentialist way, we must "maximise the good" and minimise the attendant harms in training. However, deontology states that certain sacrosanct rules and principles should never be breached. Doctors must abide by the duties of a doctor described in Good Medical Practice, maintaining standards in a way that ensures professional qualifications are respected. For the patient, there are advantages and disadvantages to receiving care in an educational setting. A 'teaching environment' tends to encourage and maintain high standards of practice from senior clinicians, but it also exposes patients to new learners, who are less efficient and polished and perhaps more prone to make errors. Learning has to fit round and complement the clinical and emotional needs of patients.

Canonical considerations in corporate restructuring.

PubMed

Holland, S

1985-03-01

Religious institutes sponsoring Catholic health facilities face competitive economic pressures that impel them to seek corporate restructuring and joint ventures to fulfill their mission to the poor. They especially must look to the Church's Code of Canon Law to protect ecclesiastical goods and maintain their Catholic identity when entering such ventures. The U.S. bishops directives also assist in guaranteeing patient expectations that the health facility will observe the Church's ethical principles. Institutes first must ensure that subsidiaries will operate according to Catholic mission and philosophy. The canons delineate proper protection of assets and identify ends toward which the religious must apply temporal goods, such as supporting clergy and performing charitable works. Alienation, or conveyance of goods, is a critical consideration in such financial transactions; canons specify the institute's administrative limits and require superiors' written permission along with their councils' consent. All involved must be "thoroughly informed concerning the economic situation," show "just cause" for the transaction, and obtain expert estimates of property values. Religious administrators retain certain faith and executive obligations, such as amending the charter, appointing the board, and merging or dissolving the corporation. With the canons they help to ensure that collaborative efforts preserve the institute's corporate mission and allow religious to carry out their responsibility for ecclesiastical goods. Though alternatives to corporate ventures may be limited, options regarding how to structure and with whom to affiliate do exist. Sponsoring bodies dedicated to providing high-quality care must explore these options

Gyges Effect: An Ethical Critique of Lethal Remotely Piloted Aircraft

DTIC Science & Technology

2017-06-09

maintain legitimacy as a profession while protecting the interests of the American people , it cannot violate the 2 rights of others when using lethal...national values. One such way recent presidential administrations make good on their pledge to protect the American people is by authorizing military...national values. One such way recent presidential administrations make good on their pledge to protect the American people is by authorizing military

Living with Low Vision

MedlinePlus

... highest possible level. • Prevent Accidents and Injury: Recommending lighting that will be most effective for a particular ... other equipment contrasts with the wall. Maintain good lighting in walkways, hallways, stairwells, etc. Use labeled tray ...

28 CFR 548.18 - Observance of religious holy days.

Code of Federal Regulations, 2010 CFR

2010-07-01

... holy days. Consistent with maintaining security, safety, and good order in the institution, the Warden shall endeavor to facilitate the observance of important religious holy days which involve special fasts...

33 CFR 117.993 - Lake Champlain.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) A sufficient number of infrared cameras shall be maintained in good working order at all times with... infrared cameras to verify that the channel is clear of all approaching vessel traffic. All approaching...

33 CFR 117.993 - Lake Champlain.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) A sufficient number of infrared cameras shall be maintained in good working order at all times with... infrared cameras to verify that the channel is clear of all approaching vessel traffic. All approaching...

Vacuum sealing drainage therapy in the presence of an external fixation device

PubMed Central

Sun, Dahui; Ju, Weina; Wang, Tiejun; Yu, Tiecheng; Qi, Baochang

2016-01-01

Abstract Rationale: Vacuum sealing drainage (VSD) is widely utilized for treating traumatic wounds. Patient concerns: It is particularly difficult and time consuming to use in combination with an external fixator. Diagnoses: This is because the hardware or pins used for fixation interfere with maintaining a seal, resulting in poor adhesion and subsequent air leakage. Interventions: To resolve this problem, we have devised a new method for sealing the wound dressing, while maintaining the required vacuum.When using this technique, a rubber strip is wrapped around each pin in 3 circles outside the plastic drape, and then tightly tied. Outcomes: After completing this procedure, a vacuum is obtained, and any air leakage stops. We employed this technique to treat a cohort of patients in our department over a period of two years, and obtained good healing of soft tissue without air leakage, as well as good clinical outcomes. Lessons: We have observed that patients treated with this method experienced good clinical outcomes without air leakage, and we recommend its use in treating cases where an external fixation device is present. PMID:27861393

7-year follow-up after open reduction and internal screw fixation in Bennett fractures.

PubMed

Leclère, Franck Marie Patrick; Jenzer, Achat; Hüsler, Rolf; Kiermeir, David; Bignion, Dietmar; Unglaub, Frank; Vögelin, Esther

2012-07-01

Bennett fractures are unstable, and, with inadequate treatment, lead to osteoarthritis, weakness and loss of function of the first carpometacarpal joint. This study focuses on long-term functional and radiological outcomes after open reduction and internal fixation. Between June 1997 and December 2005, 24 patients with Bennett fractures were treated with open reduction and internal fixation with screws at our center. Radiological and functional assessments including range of motion of the thumb and pinch and grip strength were performed 4 months post-procedure and at the long-term follow-up, on average 83 months after surgery. Reduction of the Bennett fracture was maintained as it was at the time of the procedure in 96 % of the cases when fixation with two lag screws was performed. At the 4-month follow-up, mean pinch and grip strength reached 92 ± 3 and 89 ± 4 % of the contralateral side, respectively. Long-term follow-up demonstrated no correlation between the accuracy of the fracture reduction and the development of post-traumatic arthritis. Good clinical results could be observed, if successful reduction of the fracture was achieved and maintained. However, there was no correlation between the accuracy of the fracture reduction considering a gap and step <2 mm and the development of arthritis.

Least Reliable Bits Coding (LRBC) for high data rate satellite communications

NASA Technical Reports Server (NTRS)

Vanderaar, Mark; Wagner, Paul; Budinger, James

1992-01-01

An analysis and discussion of a bandwidth efficient multi-level/multi-stage block coded modulation technique called Least Reliable Bits Coding (LRBC) is presented. LRBC uses simple multi-level component codes that provide increased error protection on increasingly unreliable modulated bits in order to maintain an overall high code rate that increases spectral efficiency. Further, soft-decision multi-stage decoding is used to make decisions on unprotected bits through corrections made on more protected bits. Using analytical expressions and tight performance bounds it is shown that LRBC can achieve increased spectral efficiency and maintain equivalent or better power efficiency compared to that of Binary Phase Shift Keying (BPSK). Bit error rates (BER) vs. channel bit energy with Additive White Gaussian Noise (AWGN) are given for a set of LRB Reed-Solomon (RS) encoded 8PSK modulation formats with an ensemble rate of 8/9. All formats exhibit a spectral efficiency of 2.67 = (log2(8))(8/9) information bps/Hz. Bit by bit coded and uncoded error probabilities with soft-decision information are determined. These are traded with with code rate to determine parameters that achieve good performance. The relative simplicity of Galois field algebra vs. the Viterbi algorithm and the availability of high speed commercial Very Large Scale Integration (VLSI) for block codes indicates that LRBC using block codes is a desirable method for high data rate implementations.

Outgassing of solid material into vacuum thermal insulation spaces

NASA Technical Reports Server (NTRS)

Wang, Pao-Lien

1994-01-01

Many cryogenic storage tanks use vacuum between inner and outer tank for thermal insulation. These cryogenic tanks also use a radiation shield barrier in the vacuum space to prevent radiation heat transfer. This shield is usually constructed by using multiple wraps of aluminized mylar and glass paper as inserts. For obtaining maximum thermal performance, a good vacuum level must be maintained with the insulation system. It has been found that over a period of time solid insulation materials will vaporize into the vacuum space and the vacuum will degrade. In order to determine the degradation of vacuum, the rate of outgassing of the insulation materials must be determined. Outgassing rate of several insulation materials obtained from literature search were listed in tabular form.

Entry Vehicle Control System Design for the Mars Smart Lander

NASA Technical Reports Server (NTRS)

Calhoun, Philip C.; Queen, Eric M.

2002-01-01

The NASA Langley Research Center, in cooperation with the Jet Propulsion Laboratory, participated in a preliminary design study of the Entry, Descent and Landing phase for the Mars Smart Lander Project. This concept utilizes advances in Guidance, Navigation and Control technology to significantly reduce uncertainty in the vehicle landed location on the Mars surface. A candidate entry vehicle controller based on the Reaction Control System controller for the Apollo Lunar Excursion Module digital autopilot is proposed for use in the entry vehicle attitude control. A slight modification to the phase plane controller is used to reduce jet-firing chattering while maintaining good control response for the Martian entry probe application. The controller performance is demonstrated in a six-degree-of-freedom simulation with representative aerodynamics.

Manipulating the transmission through valve structure composed of zero-index metamaterial

NASA Astrophysics Data System (ADS)

Wang, Yongxing; Sun, Zhouzhou; Xu, Ping

2017-11-01

We propose a valve structure composed of zero-index metamaterial to manipulate the electromagnetic wave conveniently and effectively through regulating the phase of reflected waves. Both the structure and characteristics of zero-index metamaterial need not to be changed when manipulating the transmission, which maintains the stability of zero-index metamaterial. Moreover, the good performance of tuning the electromagnetic wave is not limited by the shape and size of our proposed structure. By using our proposed valve structure, we demonstrate the realization of the tunable curved anisotropic ɛ-near-zero material waveguide with irregular shape, arbitrarily sized isotropic ɛ-near-zero material waveguide with high transmittance and the curved isotropic impedance matched ɛ-near-zero material waveguide without polarization limitations.

Endoscopic third ventriculostomy in the treatment of childhood hydrocephalus.

PubMed

Kulkarni, Abhaya V; Drake, James M; Mallucci, Conor L; Sgouros, Spyros; Roth, Jonathan; Constantini, Shlomi

2009-08-01

To develop a model to predict the probability of endoscopic third ventriculostomy (ETV) success in the treatment for hydrocephalus on the basis of a child's individual characteristics. We analyzed 618 ETVs performed consecutively on children at 12 international institutions to identify predictors of ETV success at 6 months. A multivariable logistic regression model was developed on 70% of the dataset (training set) and validated on 30% of the dataset (validation set). In the training set, 305/455 ETVs (67.0%) were successful. The regression model (containing patient age, cause of hydrocephalus, and previous cerebrospinal fluid shunt) demonstrated good fit (Hosmer-Lemeshow, P = .78) and discrimination (C statistic = 0.70). In the validation set, 105/163 ETVs (64.4%) were successful and the model maintained good fit (Hosmer-Lemeshow, P = .45), discrimination (C statistic = 0.68), and calibration (calibration slope = 0.88). A simplified ETV Success Score was devised that closely approximates the predicted probability of ETV success. Children most likely to succeed with ETV can now be accurately identified and spared the long-term complications of CSF shunting.

A Capacity Forecast Model for Volatile Data in Maintenance Logistics

NASA Astrophysics Data System (ADS)

Berkholz, Daniel

2009-05-01

Maintenance, repair and overhaul processes (MRO processes) are elaborate and complex. Rising demands on these after sales services require reliable production planning and control methods particularly for maintaining valuable capital goods. Downtimes lead to high costs and an inability to meet delivery due dates results in severe contract penalties. Predicting the required capacities for maintenance orders in advance is often difficult due to unknown part conditions unless the goods are actually inspected. This planning uncertainty results in extensive capital tie-up by rising stock levels within the whole MRO network. The article outlines an approach to planning capacities when maintenance data forecasting is volatile. It focuses on the development of prerequisites for a reliable capacity planning model. This enables a quick response to maintenance orders by employing appropriate measures. The information gained through the model is then systematically applied to forecast both personnel capacities and the demand for spare parts. The improved planning reliability can support MRO service providers in shortening delivery times and reducing stock levels in order to enhance the performance of their maintenance logistics.

Facile synthesis of nanocage Co3O4 for advanced lithium-ion batteries

NASA Astrophysics Data System (ADS)

Wang, Ying; Wang, Baofeng; Xiao, Feng; Huang, Zhenguo; Wang, Yijing; Richardson, Christopher; Chen, Zhixin; Jiao, Lifang; Yuan, Huatang

2015-12-01

A facile two-step annealing process is applied to synthesize nanocage Co3O4, using cobalt-based metal-organic framework as precursor and template. The as-obtained nanocages are composed of numerous Co3O4 nanoparticles. N2 adsorption-desorption isotherms show that the as-obtained Co3O4 has a porous structure with a favorable surface area of 110.6 m2 g-1. Electrochemical tests show that nanocage Co3O4 is a potential candidate as anode for lithium-ion batteries. A reversible specific capacity of 810 mAh g-1 was obtained after 100 cycles at a high specific current of 500 mA g-1. The material also displays good rate capability, with a reversible capacity of 1069, 1063, 850, and 720 mAh g-1 at specific current of 100, 200, 800, and 1000 mA g-1, respectively. The good electrochemical performance of nanocage Co3O4 can be attributed to its unique hierarchical hollow structure, which is maintained during electrochemical cycling.

Vaporization and Zonal Mixing in Performance Modeling of Advanced LOX-Methane Rockets

NASA Technical Reports Server (NTRS)

Williams, George J., Jr.; Stiegemeier, Benjamin R.

2013-01-01

Initial modeling of LOX-Methane reaction control (RCE) 100 lbf thrusters and larger, 5500 lbf thrusters with the TDK/VIPER code has shown good agreement with sea-level and altitude test data. However, the vaporization and zonal mixing upstream of the compressible flow stage of the models leveraged empirical trends to match the sea-level data. This was necessary in part because the codes are designed primarily to handle the compressible part of the flow (i.e. contraction through expansion) and in part because there was limited data on the thrusters themselves on which to base a rigorous model. A more rigorous model has been developed which includes detailed vaporization trends based on element type and geometry, radial variations in mixture ratio within each of the "zones" associated with elements and not just between zones of different element types, and, to the extent possible, updated kinetic rates. The Spray Combustion Analysis Program (SCAP) was leveraged to support assumptions in the vaporization trends. Data of both thrusters is revisited and the model maintains a good predictive capability while addressing some of the major limitations of the previous version.

High-performance porous polylactide stereocomplex crystallite scaffolds prepared by solution blending and salt leaching.

PubMed

Xie, Yan; Lan, Xiao-Rong; Bao, Rui-Ying; Lei, Yang; Cao, Zhi-Qiang; Yang, Ming-Bo; Yang, Wei; Wang, Yun-Bing

2018-09-01

Biodegradable stereocomplex crystallite polylactide (SC-PLA) porous scaffolds with well-defined pore structures, high heat resistance, mechanical strength, and solvent resistance together with good biocompatibility, were obtained through solution casting of mixed poly(l-lactide) and poly(d-lactide) solution and subsequent leaching of sodium chloride particles. The pore structure of the SC-PLA scaffolds can be perfectly maintained after a high-pressure sterilization treatment at 121 °C, owing to the extensive formation of stereocomplex crystallites in the scaffolds. In vivo pilot study demonstrates that the fibroblasts of rats can infiltrate into the SC-PLA scaffolds well through the open pores. Degradation tests in phosphate-buffered saline solution reveal that the structure of SC-PLA scaffolds was quite stable due to the enhanced hydrolysis-resistance and improved mechanical properties of the scaffolds. These results reveal that SC-PLA scaffolds with good biocompatibility are potentially to be used as implanted biomaterials for the regeneration and restoration of tissues or organs. Copyright © 2018 Elsevier B.V. All rights reserved.

7 CFR 58.313 - Print and bulk packaging rooms.

Code of Federal Regulations, 2010 CFR

2010-01-01

... mold (not more than 15 colonies per plate during a 15 min. exposure), dust, or other air-borne contamination and maintain a reasonable room temperature in accordance with good commercial practices. Equipment...

Time: The Administrator's Most Precious Resource

ERIC Educational Resources Information Center

Howes, Kimball L.

1974-01-01

Effective administration is dependent upon the determination of objectives and priorities and the monitoring of time expenditure in order to maintain maximum productivity. Good management means getting things done through the efforts of others. (Editor)

Investment in Transportation Assets : Briefing Paper

DOT National Transportation Integrated Search

2017-11-21

Highways, streets, railroad lines, transit systems, ports, and other transportation fixed assets enable the movement of people and goods. Investment in transportation fixed assets helps build and maintain these critical resources. The pattern of tran...

7 CFR 1499.8 - Entry and handling of commodities.

Code of Federal Regulations, 2010 CFR

2010-01-01

... entry and transit. The participant shall store and maintain the donated commodities in good condition...) Banners, posters or other media informing the public of the name and source of the donated commodities...

USDA-ARS?s Scientific Manuscript database

Ecosystems that maximize soil organic matter and good soil structure maintain high soil biological functioning, soil health and plant growth. Natural ecosystems such as prairies are valuable benchmarks for developing sustainable crop and soil management practices. Soil biological properties critical...

30 CFR 77.200 - Surface installations; general.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL... other facilities (including custom coal preparation) shall be maintained in good repair to prevent accidents and injuries to employees. ...

Brain Health

MedlinePlus

... staying socially engaged, and maintaining good heart health. Select a Topic 10 Ways to Love Your Brain ... Security and Privacy Policy Copyrights and Reprints Pressroom Select Language English Español Other © 2018 Alzheimer's Association® | All ...

Maintaining good miRNAs in the body keeps the doctor away?: Perspectives on the relationship between food-derived natural products and microRNAs in relation to exosomes/extracellular vesicles.

PubMed

Otsuka, Kurataka; Yamamoto, Yusuke; Matsuoka, Ryosuke; Ochiya, Takahiro

2018-01-01

During the last decade, it has been uncovered that microRNAs (miRNAs), a class of small non-coding RNAs, are related to many diseases including cancers. With an increase in reports describing the dysregulation of miRNAs in various tumor types, it has become abundantly clear that miRNAs play significant roles in the formation and progression of cancers. Intriguingly, miRNAs are present in body fluids because they are packed in exosomes/extracellular vesicles and released from all types of cells. The miRNAs in the fluids are measured in a relatively simple way and the profile of miRNAs is likely to be an indicator of health condition. In recent years, various studies have demonstrated that some naturally occurring compounds can control tumor-suppressive and oncogenic miRNAs in a positive manner, suggesting that food-derived compounds could maintain the expression levels of miRNAs and help maintain good health. Therefore, our daily food and compounds in food are of great interest. In addition, exogenous diet-derived miRNAs have been indicated to function in the regulation of target mammalian transcripts in the body. These findings highlight the possibility of diet for good health through the regulation of miRNAs, and we also discuss the perspective of food application and health promotion. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Bilastine safety in drivers who need antihistamines: new evidence from high-speed simulator driving test on allergic patients.

PubMed

Demonte, A; Guanti, M B; Liberati, S; Biffi, A; Fernando, F; Fainello, M; Pepe, P

2018-02-01

Bilastine is a highly selective, non-sedating antihistamine, indicated for the symptomatic treatment of allergic rhinoconjunctivitis and urticaria. Available data suggest that bilastine interferes neither with driving ability nor with flying-related performance. However, no data are available on the effect of bilastine on the driving ability in extreme conditions. Here we analyzed the effect of 7 days treatment with 20 mg bilastine in patients with allergic rhinitis and/or chronic urticaria, on psychophysical performance assessed by the Formula One (F1) high-speed simulator-driving test. This study is a phase IV, interventional, prospective, mono-centric, single arm, open-label trial. Eighteen outpatients affected by allergic rhinitis and/or chronic urticaria, able to perform a preliminary driving test on F1 simulator were considered (V-1). First, the patients had a screening visit to assess their eligibility (V0). Visit 1 (V1), at the end of placebo before bilastine treatment and Visit 2 (V2), at the end of bilastine treatment. The primary variable parameter was the ability to maintain the vehicle in a central position at different speeds (50, 150, and 250 km/h). Bilastine had a good safety profile and was well tolerated in terms of adverse events, laboratory parameters and vital signs. Bilastine did not have any negative effect on the ability to maintain the requested path, a constant speed as well as on attention and reactivity levels, even in extreme driving conditions. This study is the first done in patients with allergic rhinitis and/or chronic urticaria using a F1-high speed simulator-driving test evaluating subjects' performance under bilastine treatment.

Humate-assisted Synthesis of MoS2/C Nanocomposites via Co-Precipitation/Calcination Route for High Performance Lithium Ion Batteries

NASA Astrophysics Data System (ADS)

Geng, Qin; Tong, Xin; Wenya, Gideon Evans; Yang, Chao; Wang, Jide; Maloletnev, A. S.; Wang, Zhiming M.; Su, Xintai

2018-04-01

A facile, cost-effective, non-toxic, and surfactant-free route has been developed to synthesize MoS2/carbon (MoS2/C) nanocomposites. Potassium humate consists of a wide variety of oxygen-containing functional groups, which is considered as promising candidates for functionalization of graphene. Using potassium humate as carbon source, two-dimensional MoS2/C nanosheets with irregular shape were synthesized via a stabilized co-precipitation/calcination process. Electrochemical performance of the samples as an anode of lithium ion battery was measured, demonstrating that the MoS2/C nanocomposite calcinated at 700 °C (MoS2/C-700) electrode showed outstanding performance with a high discharge capacity of 554.9 mAh g- 1 at a current density of 100 mA g- 1 and the Coulomb efficiency of the sample maintained a high level of approximately 100% after the first 3 cycles. Simultaneously, the MoS2/C-700 electrode exhibited good cycling stability and rate performance. The success in synthesizing MoS2/C nanocomposites via co-precipitation/calcination route may pave a new way to realize promising anode materials for high-performance lithium ion batteries.

49 CFR 18.36 - Procurement.

Code of Federal Regulations, 2014 CFR

2014-10-01

... subgrantees will maintain a contract administration system which ensures that contractors perform in... and subgrantees will maintain a written code of standards of conduct governing the performance of... resources. (9) Grantees and subgrantees will maintain records sufficient to detail the significant history...

34 CFR 80.36 - Procurement.

Code of Federal Regulations, 2014 CFR

2014-07-01

... subgrantees will maintain a contract administration system which ensures that contractors perform in... and subgrantees will maintain a written code of standards of conduct governing the performance of... resources. (9) Grantees and subgrantees will maintain records sufficient to detail the significant history...

[The "Short Physical Performance Battery" in the Czech Republic -  the pilot and validation study in older persons].

PubMed

Berková, M; Topinková, E; Mádlová, P; Klán, J; Vlachová, M; Běláček, J

2013-04-01

Population ageing increases number of seniors with decline of physical capabilities and functional deficits. Targeted interventions to maintain or increase physical performance are most effective before the development of full frailty, in so-called "prefrail" period. One of the assessment tools for evaluation of the physical performance and/ or frailty in older persons is the "Short Physical Performance Battery" -  SPPB. The aim of the study was to introduce the assessment battery to clinical practice in the CR and to evaluate its selected psychometric properties. Original English SPPB was translated into Czech language and back translated to ensure linguistic accuracy. SPPB was applied in the selected sample of older persons and validated against other performance tools for cognition, self- care and nutrition status used in CR and selected psychometric properties evaluated. We examined 145 older persons (108 women, i.e. 74.48 % and 37 men, i.e. 25.52 %) mean age 80.38 years (54- 101 years, SD ± 8,47). We found good physical performance in 35 (24.1 %) older persons (SPPB 10- 12 points), 21 (14.5 %) were identified as prefrail (SPPB 7- 9 points) and 89 (61.4 %) as frail in high risk of future disability or already disabled (SPPB 6 points). We found statistically significant correlation of global SPPB score with nutritional status (MNA- Short Form), activities of daily living performance (ADL) and cognitive performance (MMSE) -  (Spearman correlation ρ = 0.51; 0.53 and 0.38 respectively). The Cronbachs a for SPPB variables scored 0.821, which is consistent with good internal consistency of SPPB battery. When evaluating 3 age groups [ 75 years (n = 41), 76- 85 (n = 62) and 86- 101 years (n = 42)] the most significant correlations were found between SPPB and MNA, ADL and MMSE in the young elderly (ρ = 0.74, 0.79 and 0.64 respectively) and they diminished with increasing age. We confirmed significant correlations between SPPB and self care activities, cognitive performance and nutritional status and good internal consistency of the battery. SPPB test is simple, easy to perform, with low time and cost requirements. It could be recommended for clinical practice in both community and hospitalized older patients to evaluate their overall physical performance and identify persons at risk of frailty and disability who may profit from targeted interventions.

The Long Island Sound Dredged Material Containment Feasibility Study.

DTIC Science & Technology

1983-02-01

ancilliary businesses, such as sporting goods stores, dockside gasoline dealers, bait and tackle shops, and fast food services would also be negatively...to there is almost always some ex- tached or unable to move fast enough maintain the area’s importance as a change of nutrients and organisms to avoid...basis, authorized depth of 14 feet or less will no longer be maintained by the Corps of (4) Fast -tracking of navigation Engineers. Presently, only 7

77 FR 49167 - Hazardous Materials: Harmonization with International Standards (RRR)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-15

...PHMSA proposes to amend the Hazardous Materials Regulations to maintain alignment with international standards by incorporating various amendments, including changes to proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport quantity limitations, and vessel stowage requirements. These revisions are necessary to harmonize the Hazardous Materials Regulations with recent changes made to the International Maritime Dangerous Goods Code, the International Civil Aviation Organization's Technical Instructions for the Safe Transport of Dangerous Goods by Air, and the United Nations Recommendations on the Transport of Dangerous Goods--Model Regulations and subsequently address a petition for rulemaking.

Hydrothermal Aging Effects on Fe/SSZ-13 and Fe/Beta NH3–SCR Catalysts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gao, Feng; Szanyi, János; Wang, Yilin

Cu/SSZ-13 has been successfully commercialized as a diesel engine exhaust aftertreatment SCR catalyst in the past few years. This catalyst, however, displays undesirable NH3-SCR selectivity at elevated reaction temperature (≥ 350 C) after hydrothermal aging. Fe/zeolites, despite the fact that most of them degrade beyond tolerance after hydrothermal aging at temperatures ≥ 650 C, typically maintain good SCR selectivities. In recent years, Fe/beta has been identified as one of the more robust Fe/zeolites for use in NH3-SCR, where activity maintains even after hydrothermal aging at 750 C. Very recently, we, for the first time, synthesized and tested NH3-SCR performance formore » fresh and hydrothermally aged Fe/SSZ-13 catalysts. This study demonstrated that Fe/SSZ-13 is also a promising robust SCR catalyst, especially for high-temperature applications. In the present study, we compare catalytic performance between Fe/SSZ-13 and Fe/beta with similar Fe loadings and Si/Al ratios. Special attention is paid to effects from hydrothermal aging, aiming to understanding similarities and differences between these two catalysts. The authors gratefully acknowledge the US Department of Energy (DOE), Energy Efficiency and Renewable Energy, Vehicle Technologies Program for the support of this work. The research described in this paper was performed at the Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by the DOE’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is operated for the US DOE by Battelle.« less

7 CFR 1599.8 - Entry and handling of commodities.

Code of Federal Regulations, 2010 CFR

2010-01-01

... approvals for entry and transit. The participant shall store and maintain the donated commodities in good...) Banners, posters or other media informing the public of the name and source of the donated commodities...

7 CFR 1779.88 - Transfers and assumptions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... amount amortized over a period not greater than the remaining life of the debt being transferred, and the... lender must certify that the transferor has cooperated in good faith, used due diligence to maintain the...

46 CFR 76.05-20 - Fixed fire extinguishing systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... all self-propelled vessels and on all barges with sleeping accommodations for more than six persons. Previously approved installations may be retained as long as they are maintained in good condition to the...

46 CFR 76.05-20 - Fixed fire extinguishing systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... all self-propelled vessels and on all barges with sleeping accommodations for more than six persons. Previously approved installations may be retained as long as they are maintained in good condition to the...

46 CFR 76.05-20 - Fixed fire extinguishing systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... all self-propelled vessels and on all barges with sleeping accommodations for more than six persons. Previously approved installations may be retained as long as they are maintained in good condition to the...

46 CFR 76.05-20 - Fixed fire extinguishing systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... all self-propelled vessels and on all barges with sleeping accommodations for more than six persons. Previously approved installations may be retained as long as they are maintained in good condition to the...

46 CFR 76.05-20 - Fixed fire extinguishing systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... all self-propelled vessels and on all barges with sleeping accommodations for more than six persons. Previously approved installations may be retained as long as they are maintained in good condition to the...

In vivo performance of novel soybean/gelatin-based bioactive and injectable hydroxyapatite foams

PubMed Central

Kovtun, Anna; Goeckelmann, Melanie J.; Niclas, Antje A.; Montufar, Edgar B.; Ginebra, Maria-Pau; Planell, Josep A.; Santin, Matteo; Ignatius, Anita

2015-01-01

Major limitations of calcium phosphate cements (CPCs) are their relatively slow degradation rate and the lack of macropores allowing the ingrowth of bone tissue. The development of self-setting cement foams has been proposed as a suitable strategy to overcome these limitations. In previous work we developed a gelatine-based hydroxyapatite foam (G-foam), which exhibited good injectability and cohesion, interconnected porosity and good biocompatibility in vitro. In the present study we evaluated the in vivo performance of the G-foam. Furthermore, we investigated whether enrichment of the foam with soybean extract (SG-foam) increased its bioactivity. G-foam, SG-foam and non-foamed CPC were implanted in a critical-size bone defect in the distal femoral condyle of New Zealand white rabbits. Bone formation and degradation of the materials were investigated after 4, 12 and 20 weeks using histological and biomechanical methods. The foams maintained their macroporosity after injection and setting in vivo. Compared to non-foamed CPC, cellular degradation of the foams was considerably increased and accompanied by new bone formation. The additional functionalization with soybean extract in the SG-foam slightly reduced the degradation rate and positively influenced bone formation in the defect. Furthermore, both foams exhibited excellent biocompatibility, implying that these novel materials may be promising for clinical application in non-loaded bone defects. PMID:25448348

In vivo performance of novel soybean/gelatin-based bioactive and injectable hydroxyapatite foams.

PubMed

Kovtun, Anna; Goeckelmann, Melanie J; Niclas, Antje A; Montufar, Edgar B; Ginebra, Maria-Pau; Planell, Josep A; Santin, Matteo; Ignatius, Anita

2015-01-01

Major limitations of calcium phosphate cements (CPCs) are their relatively slow degradation rate and the lack of macropores allowing the ingrowth of bone tissue. The development of self-setting cement foams has been proposed as a suitable strategy to overcome these limitations. In previous work we developed a gelatine-based hydroxyapatite foam (G-foam), which exhibited good injectability and cohesion, interconnected porosity and good biocompatibility in vitro. In the present study we evaluated the in vivo performance of the G-foam. Furthermore, we investigated whether enrichment of the foam with soybean extract (SG-foam) increased its bioactivity. G-foam, SG-foam and non-foamed CPC were implanted in a critical-size bone defect in the distal femoral condyle of New Zealand white rabbits. Bone formation and degradation of the materials were investigated after 4, 12 and 20weeks using histological and biomechanical methods. The foams maintained their macroporosity after injection and setting in vivo. Compared to non-foamed CPC, cellular degradation of the foams was considerably increased and accompanied by new bone formation. The additional functionalization with soybean extract in the SG-foam slightly reduced the degradation rate and positively influenced bone formation in the defect. Furthermore, both foams exhibited excellent biocompatibility, implying that these novel materials may be promising for clinical application in non-loaded bone defects. Copyright © 2014 Acta Materialia Inc. All rights reserved.

Carbon nanotube network film directly grown on carbon cloth for high-performance solid-state flexible supercapacitors

NASA Astrophysics Data System (ADS)

Zhou, Cheng; Liu, Jinping

2014-01-01

Carbon nanotubes (CNTs) have received increasing attention as electrode materials for high-performance supercapacitors. We herein present a straightforward method to synthesize CNT films directly on carbon cloths as electrodes for all-solid-state flexible supercapacitors (AFSCs). The as-made highly conductive electrodes possess a three-dimensional (3D) network architecture for fast ion diffusion and good flexibility, leading to an AFSC with a specific capacitance of 106.1 F g-1, an areal capacitance of 38.75 mF cm-2, an ultralong cycle life of 100 000 times (capacitance retention: 99%), a good rate capability (can scan at 1000 mV s-1, at which the capacitance is still ˜37.8% of that at 5 mV s-1), a high energy density (2.4 μW h cm-2) and a high power density (19 mW cm-2). Moreover, our AFSC maintains excellent electrochemical attributes even with serious shape deformation (bending, folding, etc), high mechanical pressure (63 kPa) and a wide temperature window (up to 100 ° C). After charging for only 5 s, three such AFSC devices connected in series can efficiently power a red round LED for 60 s. Our work could pave the way for the design of practical AFSCs, which are expected to be used for various flexible portable/wearable electronic devices in the future.

Analysis of pharmaceutical adulterants in plant food supplements by UHPLC-MS/MS.

PubMed

Paíga, Paula; Rodrigues, Manuela J E; Correia, Manuela; Amaral, Joana S; Oliveira, M Beatriz P P; Delerue-Matos, Cristina

2017-03-01

A method based on the Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) extraction and ultra-high performance liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS/MS) was successfully developed and validated for the analysis of 26 pharmaceutical compounds belonging to different therapeutic classes (anorexics, stimulants, anxiolytics, antidepressants and laxatives), which are all prone to be illegally added into weight-loss plant food supplements (PFS) for their pharmacological activity. Internal standard calibration with six isotopically labelled compounds rendered good linearity in the range of 5 to 1000μg/l, depending on the compound, and good sensitivity with limits of quantification in the range of 0.02-9.80μg/l. Recoveries were assessed for all the 16 samples analysed and were found between 70% and 120% for over 90% of the analytes. The average recovery value was 90.8%, for the different studied matrices (liquids, liquid ampoules, tablets and capsules), with RSD values lower than 10% for all forms. The changes introduced to the QuEChERS procedure maintained the good performance characteristics of the extraction method while preserving the chromatographic system for the introduction of unwanted matrix compounds. Synephrine was the only compound detected and quantified in one sample, but at a very low concentration (768μg/l) and its presence may be due to the plant extracts used in the formulation, as synephrine is known to be a natural constituent of Citrus aurantium amara. Despite none of the 16 evaluated samples were found to be adulterated by the illegal addition of the drugs included in this work, the developed methodology can be very useful for monitoring the adulteration of weight-loss PFS. Copyright © 2016 Elsevier B.V. All rights reserved.

Enhancing the Bioactivity of Yttria-Stabilized Tetragonal Zirconia Ceramics via Grain-Boundary Activation.

PubMed

Ke, Jinhuan; He, Fupo; Ye, Jiandong

2017-05-17

Yttria-stabilized tetragonal zirconia (Y-TZP) has been proposed as a potential dental implant because of its good biocompatibility, excellent mechanical properties, and distinctive aesthetic effect. However, Y-TZP cannot form chemical bonds with bone tissue because of its biological inertness, which affects the reliability and long-term efficacy of Y-TZP implants. In this study, to improve the bioactivity of Y-TZP ceramics while maintaining their good mechanical performance, Y-TZP was modified by grain-boundary activation via the infiltration of a bioactive glass (BG) sol into the surface layers of Y-TZP ceramics under different negative pressures (atmospheric pressure, -0.05 kPa, and -0.1 kPa), followed by gelling and sintering. The in vitro bioactivity, mechanical properties, and cell behavior of the Y-TZP with improved bioactivity were systematically investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS), electron probe microanalysis (EPMA), and Raman spectroscopy. The results of the bioactivity test conducted by immersing Y-TZP in simulated body fluid (SBF) showed that a bonelike apatite layer was produced on the entire surface. The mechanical properties of the modified Y-TZP decreased as the negative pressure in the BG-infiltration process increased relative to those of the Y-TZP blank group. However, the samples infiltrated with the BG sol under -0.05 kPa and atmospheric pressure still retained good mechanical performance. The cell-culture results revealed that the bioactive surface modification of Y-TZP could promote cell adhesion and differentiation. The present work demonstrates that the bioactivity of Y-TZP can be enhanced by grain-boundary activation, and the bioactive Y-TZP is expected to be a potential candidate for use as a dental implant material.

Strength and Performance Enhancement of Bonded Joints by Spatial Tailoring of Adhesive Compliance via 3D Printing.

PubMed

Kumar, S; Wardle, Brian L; Arif, Muhamad F

2017-01-11

Adhesive bonding continues to emerge as a preferred route for joining materials with broad applications including advanced structures, microelectronics, biomedical systems, and consumer goods. Here, we study the mechanics of deformation and failure of tensile-loaded single-lap joints with a compliance-tailored adhesive. Tailoring of the adhesive compliance redistributes stresses and strains to reduce both shear and peel concentrations at the ends of the adhesive that determine failure of the joint. Utilizing 3D printing, the modulus of the adhesive is spatially varied along the bondlength. Experimental strength testing, including optical strain mapping, reveals that the strain redistribution results in a greater than 100% increase in strength and toughness concomitant with a 50% increase in strain-to-break while maintaining joint stiffness. The tailoring demonstrated here is immediately realizable in a broad array of 3D printing applications, and the level of performance enhancement suggests that compliance tailoring of the adhesive is a generalizable route for achieving superior performance of joints in other applications, such as advanced structural composites.

Assisting people with disabilities in actively performing physical activities by controlling the preferred environmental stimulation with a gyration air mouse.

PubMed

Shih, Ching-Tien; Shih, Ching-Hsiang; Luo, Ching-Hsing

2013-12-01

The latest researchers have employed software technology to turn gyration air mice into a high performance limb detector to detect specific limb movement, and to further collaborate using the preferred environmental stimulation to help people with disabilities to suppress unwanted behaviors or habits and to reward good behaviors. This study extended the functionality of a gyration air mouse, and used the mouse as a precise physical activity detector integrated with the preferred environmental stimulation to assess if this integrated set can be used to help two disabled people who are overweight and lacking in exercise to actively perform physical activities. The study was conducted based on an A-B-A-B design. The results showed that both participants increased significantly the time duration required for them to maintain their physical activity status so that they could obtain their favorite environmental stimulation during the intervention phases. Both the practical and developmental implications of the findings are then discussed. Copyright © 2013 Elsevier Ltd. All rights reserved.

Instrument response measurements of ion mobility spectrometers in situ: maintaining optimal system performance of fielded systems

NASA Astrophysics Data System (ADS)

Wallis, Eric; Griffin, Todd M.; Popkie, Norm, Jr.; Eagan, Michael A.; McAtee, Robert F.; Vrazel, Danet; McKinly, Jim

2005-05-01

Ion Mobility Spectroscopy (IMS) is the most widespread detection technique in use by the military for the detection of chemical warfare agents, explosives, and other threat agents. Moreover, its role in homeland security and force protection has expanded due, in part, to its good sensitivity, low power, lightweight, and reasonable cost. With the increased use of IMS systems as continuous monitors, it becomes necessary to develop tools and methodologies to ensure optimal performance over a wide range of conditions and extended periods of time. Namely, instrument calibration is needed to ensure proper sensitivity and to correct for matrix or environmental effects. We have developed methodologies to deal with the semi-quantitative nature of IMS and allow us to generate response curves that allow a gauge of instrument performance and maintenance requirements. This instrumentation communicates to the IMS systems via a software interface that was developed in-house. The software measures system response, logs information to a database, and generates the response curves. This paper will discuss the instrumentation, software, data collected, and initial results from fielded systems.

Anaerobic treatment of rice winery wastewater in an upflow filter packed with steel slag under different hydraulic loading conditions.

PubMed

Jo, Yeadam; Kim, Jaai; Hwang, Seokhwan; Lee, Changsoo

2015-10-01

Rice-washing drainage (RWD), a strong organic wastewater, was anaerobically treated using an upflow filter filled with blast-furnace slag. The continuous performance of the reactor was examined at varying hydraulic retention times (HRTs). The reactor achieved 91.7% chemical oxygen demand removal (CODr) for a 10-day HRT (0.6 g COD/Ld organic loading rate) and maintained fairly stable performance until the HRT was shortened to 2.2 days (CODr > 84%). Further decreases in HRT caused process deterioration (CODr < 50% and pH < 5.5 for a 0.7-day HRT). The methane production rate increased with decreasing HRT to reach the peak level for a 1.3-day HRT, whereas the yield was significantly greater for 3.4-day or longer HRTs. The substrate removal and methane production kinetics were successfully evaluated, and the generated kinetic models produced good performance predictions. The methanogenic activity of the reactor likely relies on the filter biofilm, with Methanosaeta being the main driver. Copyright © 2015 Elsevier Ltd. All rights reserved.

How to maintain chain drives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wright, J.L.

1992-06-18

Properly selected and maintained chain drives can be expected to give thousands of hours of reliable service. Selection is usually done just once. This paper reports on good maintenance which must be done regularly to keep the drive operating. An effective maintenance program for roller chain should include correct type and adequate amounts of lubrication, replacement of worn chains and sprockets, and elimination of drive interferences. It is important to set u a lubrication and inspection/correction schedule to ensure that all required maintenance is carried out.

Asphalt surface treatment practice in southeastern United States.

DOT National Transportation Integrated Search

2014-07-01

It costs less to maintain roads in good condition than in poor condition. Pavement preservation is a set of : activities to extend pavement life, improve safety, and meet road user expectations. Surface treatments are : pavement preservation treatmen...

Professional Growth: From First Job to Retirement.

ERIC Educational Resources Information Center

Hitt, Dorothy

1987-01-01

The author discusses how secretaries can manage their own professional development. Major points are (1) practice and update technical skills, (2) work toward certification, and (3) maintain a professional image, good etiquette, and a positive attitude. (CH)

Surviving the staffing crisis.

PubMed

Ehrhardt, Patty

2002-01-01

Numerous seminars and articles discuss the staffing shortage in health care and in the laboratory. Most of these have dealt with the importance of retaining and recruiting good employees. Given the median age of laboratories (49 years old), the decrease in medical technology schools, and a decline in people choosing the laboratory profession, the staffing shortage is here to stay and will affect the way we run our laboratories for years to come. Clinical systems managers need to identify and make the changes necessary in their laboratories to deal with the staffing shortage while maintaining quality testing and good customer service. This article will review the need and the process to assess laboratory operations along with the needs of the facility and/or health-care community. Obvious and not-so-obvious ideas for streamlining laboratory efficiencies along with maintaining high levels of quality and service will be presented.

Clinical evaluation of a simultaneous closed-loop anaesthesia control system for depth of anaesthesia and neuromuscular blockade*.

PubMed

Janda, M; Simanski, O; Bajorat, J; Pohl, B; Noeldge-Schomburg, G F E; Hofmockel, R

2011-12-01

We developed a closed-loop system to control the depth of anaesthesia and neuromuscular blockade using the bispectral index and the electromyogram simultaneously and evaluated the clinical performance of this combined system for general anaesthesia. Twenty-two adult patients were included in this study. Anaesthesia was induced by a continuous infusion of remifentanil at 0.4 μg.kg(-1) .min(-1) (induction dose) and then 0.25 μg.kg(-1) .min(-1) (maintenance dose) and propofol at 2 mg.kg(-1) 3 min later. The combined automatic control was started 2 min after tracheal intubation. The depth of anaesthesia was recorded using bispectral index monitoring using a target value of 40. The target value of neuromuscular blockade, using mivacurium, was a T1/T1(0) twitch height of 10%. The precision of the system was calculated using internationally defined performance parameters. Twenty patients were included in the data analysis. The mean (SD) duration of simultaneous control was 129 (69) min. No human intervention was necessary during the computer-controlled administration of propofol and mivacurium. All patients assessed the quality of anaesthesia as 'good' to 'very good'; there were no episodes of awareness. The mean (SD) median performance error, median absolute performance error and wobble for the control of depth of anaesthesia and for neuromuscular blockade were -0.31 (1.78), 6.76 (3.45), 6.32 (2.93) and -0.38 (1.68), 3.75 (4.83), 3.63 (4.69), respectively. The simultaneous closed-loop system using propofol and mivacurium was able to maintain the target values with a high level of precision in a clinical setting. © 2011 The Authors. Anaesthesia © 2011 The Association of Anaesthetists of Great Britain and Ireland.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nick Cannell; Dr. Mark Samonds; Adi Sholapurwalla

The investment casting process is an expendable mold process where wax patterns of the part and rigging are molded, assembled, shelled and melted to produce a ceramic mold matching the shape of the component to be cast. Investment casting is an important manufacturing method for critical parts because of the ability to maintain dimensional shape and tolerances. However, these tolerances can be easily exceeded if the molding components do not maintain their individual shapes well. In the investment casting process there are several opportunities for the final casting shape to not maintain the intended size and shape, such as shrinkagemore » of the wax in the injection tool, the modification of the shape during shell heating, and with the thermal shrink and distortion in the casting process. Studies have been completed to look at the casting and shell distortions through the process in earlier phases of this project. Dr. Adrian Sabau at Oak Ridge National Labs performed characterizations and validations of 17-4 PH stainless steel in primarily fused silica shell systems with good agreement between analysis results and experimental data. Further tasks provided material property measurements of wax and methodology for employing a viscoelastic definition of wax materials into software. The final set of tasks involved the implementation of the findings into the commercial casting analysis software ProCAST, owned and maintained by ESI Group. This included: o the transfer of the wax material property data from its raw form into separate temperature-dependent thermophysical and mechanical property datasets o adding this wax material property data into an easily viewable and modifiable user interface within the pre-processing application of the ProCAST suite, namely PreCAST o and validating the data and viscoelastic wax model with respect to experimental results« less

Eye movements to audiovisual scenes reveal expectations of a just world.

PubMed

Callan, Mitchell J; Ferguson, Heather J; Bindemann, Markus

2013-02-01

When confronted with bad things happening to good people, observers often engage reactive strategies, such as victim derogation, to maintain a belief in a just world. Although such reasoning is usually made retrospectively, we investigated the extent to which knowledge of another person's good or bad behavior can also bias people's online expectations for subsequent good or bad outcomes. Using a fully crossed design, participants listened to auditory scenarios that varied in terms of whether the characters engaged in morally good or bad behavior while their eye movements were tracked around concurrent visual scenes depicting good and bad outcomes. We found that the good (bad) behavior of the characters influenced gaze preferences for good (bad) outcomes just prior to the actual outcomes being revealed. These findings suggest that beliefs about a person's moral worth encourage observers to foresee a preferred deserved outcome as the event unfolds. We include evidence to show that this effect cannot be explained in terms of affective priming or matching strategies. 2013 APA, all rights reserved

Exercise for midlife women.

PubMed

Shangold, M M; Sherman, C

1998-12-01

Exercise is good for everyone, but it's more important than ever when you reach midlife. While regular exercise may not eliminate symptoms like hot flushes, it can improve your general well-being and increase your strength and stamina in daily life. If you want to lose fat or maintain a healthy weight, exercise is far more effective than diet alone. A physically active lifestyle, along with good nutrition and estrogen therapy, will also help protect you against heart disease, overweight, and osteoporosis.

Guidelines for Aerobic Fitness Training in the U.S. Army

DTIC Science & Technology

1979-08-06

Workouts should be at least three times per week with a 1-2 day rest between each workout . 8. Aerobic training methcds/proqrams The type of training program...hamnstrings) and the calf (gastrocnemius and soleus). There are two calisthenic exercises that are very good for this. The first one involves...physiologist-s agree that a workout of 20-25 minutes, three times per week, will maintain good physical condition. Workouts should always be pre- ceded by warm

Escoja Alimentos Sanos y Que Deben Hacer los Padres de los Ninos Que Pesan Mucho. (Food Choices for Good Health and Children and Weight: What's a Parent To Do?).

ERIC Educational Resources Information Center

Ikeda, Joanne P.; Mitchell, Rita

These two publications offer parents information on food choices for children and children's weight. The first publication is a guide that lists, for each of the five food groups, which foods should be eaten often, sometimes, or rarely in order to maintain good health. The food groups are: (1) milk and milk products; (2) meats, poultry, fish,…

Evidence based vaccinology.

PubMed

Nalin, David R

2002-02-22

Evidence based vaccinology (EBV) is the identification and use of the best evidence in making and implementing decisions during all of the stages of the life of a vaccine, including pre-licensure vaccine development and post-licensure manufacture and research, and utilization of the vaccine for disease control. Vaccines, unlike most pharmaceuticals, are in a continuous process of development both before and after licensure. Changes in biologics manufacturing technology and changes that vaccines induce in population and disease biology lead to periodic review of regimens (and sometimes dosage) based on changing immunologic data or public perceptions relevant to vaccine safety and effectiveness. EBV includes the use of evidence based medicine (EBM) both in clinical trials and in national disease containment programs. The rationale for EBV is that the highest evidentiary standards are required to maintain a rigorous scientific basis of vaccine quality control in manufacture and to ensure valid determination of vaccine efficacy, field effectiveness and safety profiles (including post-licensure safety monitoring), cost-benefit analyses, and risk:benefit ratios. EBV is increasingly based on statistically validated, clearly defined laboratory, manufacturing, clinical and epidemiological research methods and procedures, codified as good laboratory practices (GLP), good manufacturing practices (GMP), good clinical research practices (GCRP) and in clinical and public health practice (good vaccination practices, GVP). Implementation demands many data-driven decisions made by a spectrum of specialists pre- and post-licensure, and is essential to maintaining public confidence in vaccines.

The effects of Ramadan intermittent fasting on athletic performance: recommendations for the maintenance of physical fitness.

PubMed

Chaouachi, Anis; Leiper, John B; Chtourou, Hamdi; Aziz, Abdul Rashid; Chamari, Karim

2012-01-01

The behavioural modifications that accompany Ramadan intermittent fasting (RIF) are usually associated with some alterations in the metabolic, physiological, and psychological responses of athletes that may affect sport performance. Muslim athletes who are required to train and/or compete during the month-long, diurnal fast must adopt coping strategies that allow them to maintain physical fitness and motivation if they are to perform at the highest level. This updated review aims to present the current state of knowledge of the effects of RIF on training and performance, focusing on key-factors that contribute to the effects of Ramadan on exercise performance: energy restriction, sleep deprivation, circadian rhythm perturbation, dehydration, and alterations in the training load. The available literature contain few studies that have examined the effects of RIF on physical performance in athletes and, to date, the results are inconclusive, so the effects of RIF on competition outcomes are not at present wholly understood. The diverse findings probably indicate individual differences in the adaptability and self-generated coping strategies of athletes during fasting and training. However, the results of the small number of well-controlled studies that have examined the effects of Ramadan on athletic performance suggest that few aspects of physical fitness are negatively affected, and where decrements are observed these are usually modest. Subjective feelings of fatigue and other mood indicators are often cited as implying additional stress on the athlete throughout Ramadan, but most studies show that these factors may not result in decreases in performance and that perceived exercise intensity is unlikely to increase to any significant degree. Current evidence from good, well-controlled research supports the conclusion that athletes who maintain their total energy and macronutrient intake, training load, body composition, and sleep length and quality are unlikely to suffer any substantial decrements in performance during Ramadan. Further research is required to determine the effect of RIF on the most challenging events or exercise protocols and on elite athletes competing in extreme environments.

Indexing Volumetric Shapes with Matching and Packing

PubMed Central

Koes, David Ryan; Camacho, Carlos J.

2014-01-01

We describe a novel algorithm for bulk-loading an index with high-dimensional data and apply it to the problem of volumetric shape matching. Our matching and packing algorithm is a general approach for packing data according to a similarity metric. First an approximate k-nearest neighbor graph is constructed using vantage-point initialization, an improvement to previous work that decreases construction time while improving the quality of approximation. Then graph matching is iteratively performed to pack related items closely together. The end result is a dense index with good performance. We define a new query specification for shape matching that uses minimum and maximum shape constraints to explicitly specify the spatial requirements of the desired shape. This specification provides a natural language for performing volumetric shape matching and is readily supported by the geometry-based similarity search (GSS) tree, an indexing structure that maintains explicit representations of volumetric shape. We describe our implementation of a GSS tree for volumetric shape matching and provide a comprehensive evaluation of parameter sensitivity, performance, and scalability. Compared to previous bulk-loading algorithms, we find that matching and packing can construct a GSS-tree index in the same amount of time that is denser, flatter, and better performing, with an observed average performance improvement of 2X. PMID:26085707

Polymer excipients enable sustained drug release in low pH from mechanically strong inorganic geopolymers.

PubMed

Jämstorp, Erik; Yarra, Tejaswi; Cai, Bing; Engqvist, Håkan; Bredenberg, Susanne; Strømme, Maria

2012-01-01

Improving acid resistance, while maintaining the excellent mechanical stability is crucial in the development of a sustained and safe oral geopolymer dosage form for highly potent opioids. In the present work, commercially available Methacrylic acid-ethyl acrylate copolymer, Polyethylene-glycol (PEG) and Alginate polymer excipients were included in dissolved or powder form in geopolymer pellets to improve the release properties of Zolpidem, herein acting as a model drug for the highly potent opioid Fentanyl. Scanning electron microscopy, compression strength tests and drug release experiments, in gastric pH 1 and intestinal pH 6.8 conditions, were performed. The polymer excipients, with an exception for PEG, reduced the drug release rate in pH 1 due to their ability to keep the pellets in shape, in combination with the introduction of an insoluble excipient, and thereby maintain a barrier towards drug diffusion and release. Neither geopolymer compression strength nor the release in pH 6.8 was considerably impaired by the incorporation of the polymer excipients. The geopolymer/polymer composites combine high mechanical strength and good release properties under both gastric and intestinal pH conditions, and are therefore promising oral dosage forms for sustained release of highly potent opioids.

Smart Nanocomposite Coatings with Chameleon Surface Adaptation in Tribological Applications

NASA Astrophysics Data System (ADS)

Voevodin, A. A.; Zabinski, J. S.

Smart nanocomposite tribological coatings were designed to respond to changing environmental conditions by self-adjustment of their surface properties to maintain good tribological performance in any environment. These coatings have been dubbed "chameleon" because of their ability to change their surface chemistry and structure to avoid wear. The first "chameleon" coatings were made of WC, WS2, and DLC; these coatings provided superior mechanical toughness and performance in dry/humid environmental cycling. In order to address temperature variation, the second generation of "chameleon" coatings were made of yttria stabilized zirconia (YSZ) in a gold matrix with encapsulated nano-sized reservoirs of MoS2 and DLC. High temperature lubrication with low melting point glassy ceramic phases was also explored. All coatings were produced using a combination of laser ablation and magnetron sputtering. They were thoroughly characterized by various analytical, mechanical, and tribological methods. Coating toughness was remarkably enhanced by activation of a grain boundary sliding mechanism. Friction and wear endurance measurements were performed in controlled humidity air, dry nitrogen, and vacuum environments, as well as at 500-600 °C in air. Unique friction and wear performance in environmental cycling was demonstrated.

Pediatric intramedullary spinal cord lesions: Pathological spectrum and outcome of surgery

PubMed Central

Sahu, Rajni Kant; Das, Kuntal Kanti; Bhaisora, Kamlesh Singh; Singh, Amit Kumar; Mehrotra, Anant; Srivastava, Arun Kumar; Sahu, Rabi Narayan; Jaiswal, Awadhesh Kumar; Behari, Sanjay

2015-01-01

Background: Pediatric intramedullary spinal cord lesions are not only rare but also different from adults in a number of aspects. We aimed to study the incidence and the frequencies of various pediatric intramedullary mass lesions, their outcome to treatment and the factors determining their outcome of treatment. Materials and Methods: Thirty-one consecutive children (aged 1–18 years, mean 11.1 years, male: female = 1.8:1) with pathologically proven intramedullary spinal cord lesions treated at our center were studied. Clinico-radiological, histopathological, operative, and outcome data were reviewed retrospectively. The functional status was assessed using the modified McCormick grading system. Results: Gross total tumor excision was performed in 19 patients (61.3%), subtotal in 9 patients (29%), partial excision was performed in 2 (6.5%) patient, and only biopsy was performed in 1 patient (6.5%). There was one peroperative death, 2 patients died at follow-up. Complications included wound related complications (n = 4), transient deterioration in the motor power, and respiratory complication requiring a tracheostomy. Six patients showed recurrence at a mean follow-up of 16.4 months. Developmental tumors, high-grade ependymomas, and incompletely excised grade 2 ependymomas showed a tendency to recur. Conclusions: Children constituted nearly 1/5th (17.4%) of intramedullary spinal cord tumors. Astrocytomas and ependymomas taken together constituted the most common intramedullary spinal lesions in children; however, developmental tumors predominated in the first decade. Children usually presented in good functional grades preoperatively and maintained good grades after surgery. Functional outcome was dependent on the preoperative neurological status and histopathology of the lesions. PMID:26557160

Can previously sedentary females use the feeling scale to regulate exercise intensity in a gym environment? an observational study.

PubMed

Hamlyn-Williams, Charlotte C; Tempest, Gavin; Coombs, Sarah; Parfitt, Gaynor

2015-01-01

Recent research suggests that the Feeling Scale (FS) can be used as a method of exercise intensity regulation to maintain a positive affective response during exercise. However, research to date has been carried out in laboratories and is not representative of natural exercise environments. The purpose of this study was to evaluate whether sedentary women can self-regulate their exercise intensity using the FS to experience positive affective responses in a gym environment using their own choice of exercise mode; cycling or treadmill. Fourteen females (24.9 years ± 5.2; height 166.7 ± 5.7 cm; mass 66.3 ± 13.4 kg; BMI 24.1 ± 5.5)) completed a submaximal exercise test and each individual's ventilatory threshold ([Formula: see text]) was identified. Following this, three 20 min gym-based exercise trials, either on a bike or treadmill were performed at an intensity that was self-selected and perceived to correspond to the FS value of +3 (good). Oxygen uptake, heart rate (HR) and ratings of perceived exertion (RPE) were measured during exercise at the participants chosen intensity. Results indicated that on average participants worked close to their [Formula: see text] and increased their exercise intensity during the 20-min session. Participants worked physiologically harder during cycling exercise. Consistency of oxygen uptake, HR and RPE across the exercise trials was high. The data indicate that previously sedentary women can use the FS in an ecological setting to regulate their exercise intensity and that regulating intensity to feel 'good' should lead to individuals exercising at an intensity that would result in cardiovascular gains if maintained.

Electrochemical characteristics of amorphous carbon nanorod synthesized by radio frequency magnetron sputtering

NASA Astrophysics Data System (ADS)

Chang, Hsin-Yueh; Huang, Yung-Jui; Chang, Hsuan-Chen; Su, Wei-Jhih; Shih, Yi-Ting; Chen, John L.; Honda, Shin-ichi; Huang, Ying-Sheng; Lee, Kuei-Yi

2015-01-01

Amorphous carbon nanorods (CNRs) were deposited directly using radio frequency magnetron sputtering. The synthesized CNR electrochemical properties were investigated using graphene as the current collector for an electric double layer capacitor. The CNRs were vertically aligned to the graphene to achieve higher specific surface area. The capacitor performance was characterized using electrochemical impedance spectroscopy, cyclic voltammetry, and galvanostatic charge-discharge testing in 1 M KOH electrolyte at 30°C, 40°C, 50°C, and 60°C. The CNR specific capacitance was observed to increase with increasing measurement temperature and could reach up to 830 F/g at 60°C. Even after extensive measurements, the CNR electrode maintained good adhesion to the graphene current collector thereby suggesting electrode material stability.

Quarter-Shifted Microincisional Sutureless Vitrectomy in Patients with a Glaucoma Drainage Implant or Filtering Bleb.

PubMed

Song, Ji Hun; Jang, Seran; Cho, Eun Hyung; Ahn, Jaehong

2017-05-01

When vitrectomy is performed in eyes that have undergone glaucoma surgery, the site of sclerotomy often overlaps with the previous glaucoma operation site. It can lead to serious complications such as postoperative hypotony, leakage, and/or infection. Our technique involves modification of surgeon's position and two sclerotomy sites 45° away from the original position, with an infusion cannula inserted infranasally to avoid damage to the glaucoma drainage implant or filtering bleb. The modified approach was applied to seven eyes with various indications. Vitrectomy was successfully completed, and there were no sclerotomy site complications, leakage, or hypotony in any case. Good intraocular pressure control was maintained throughout the postoperative course in all cases. © Copyright: Yonsei University College of Medicine 2017.

Initial evaluation of a convection counter streaming galvanization technique of sex separation of human spermatozoa.

PubMed

Daniell, J F; Herbert, C M; Repp, J; Torbit, C A; Wentz, A C

1982-08-01

A new method for separating X and Y human spermatozoa called convection counter streaming galvanization was evaluated. The method was independently performed by this semenology laboratory with the use of the special separation equipment and extending media provided by its developer, Dr. Bhairab C. Bhattacharya. The mean number of Y spermatozoa increased from 48% to 77% in the separated fraction predicted to be Y-enriched. The fraction predicted to be X-enriched increased from a mean of 52% to 77%. The one separation process allowed accumulation of both enriched fractions simultaneously. The separated portions of spermatozoa maintained good motility and penetration of cervical mucus but produced a mean recovery concentration in the X- and Y-enriched fractions of only 15% to 16% of the preseparation concentration.

A linear-to-circular polarization converter based on a second-order band-pass frequency selective surface

NASA Astrophysics Data System (ADS)

Lin, Baoqin; Wu, Jia-liang; Da, Xin-yu; Li, Wei; Ma, Jia-jun

2017-01-01

In this work, we propose a linear-to-circular transmission polarization converter based on a second-order band-pass frequency selective surface (FSS). The FSS is composed of a three-layer aperture-coupled-patch structure, it can be interpreted as an array of antenna-filter-antenna modules, wherein the antenna is just a circularly polarized corner-truncated square microstrip antenna. A prototype of the proposed polarization converter is analyzed, fabricated and tested. Both simulation and experimental results show that the 3-dB axial ratio relative bandwidth of the polarization converter is over 30%, and the maximum insertion loss is only 1.87 dB; in addition, it can maintain good performance over a wide angular bandwidth at TE incidence.

Visual environment, attention allocation, and learning in young children: when too much of a good thing may be bad.

PubMed

Fisher, Anna V; Godwin, Karrie E; Seltman, Howard

2014-07-01

A large body of evidence supports the importance of focused attention for encoding and task performance. Yet young children with immature regulation of focused attention are often placed in elementary-school classrooms containing many displays that are not relevant to ongoing instruction. We investigated whether such displays can affect children's ability to maintain focused attention during instruction and to learn the lesson content. We placed kindergarten children in a laboratory classroom for six introductory science lessons, and we experimentally manipulated the visual environment in the classroom. Children were more distracted by the visual environment, spent more time off task, and demonstrated smaller learning gains when the walls were highly decorated than when the decorations were removed. © The Author(s) 2014.

Writing: the Quarterly as text.

PubMed

Locke, Lawrence F

2005-06-01

The purpose of this essay is to examine how writing has shaped the nature of the Quarterly over 75 years. Here I explore how stylistic elements have changed over time, how form has interacted with function and content, and how well the resulting text has served the several communities within physical education. I make the following assertions. First, the writing style that has become the model for research reports is needlessly dense and daunting for readers. Second, the desire to maintain a journal that serves both as an interdisciplinary resource for a broad audience of physical educators and as an outlet for reports directed to limited audiences of technical specialists has prevented full performance of either function. Those concerns notwithstanding, I find good cause for celebration--as well as for guarded optimism about the future.

Reduction of Electrolyte Components on a Coated Si Anode of Lithium-Ion Batteries.

PubMed

Gomez-Ballesteros, Jose L; Balbuena, Perla B

2017-07-20

Surface modification of Si anodes in Li-ion batteries by deposition of a thin alucone coating has demonstrated an effective way to help maintain a stable anode/electrolyte interface and good battery performance. In this work, we investigate the interactions and reactivity of the film with electrolyte components using ab initio molecular dynamics simulations. Adsorption of solvent molecules (ethylene carbonate, EC) and salt (LiPF 6 ) and reduction by two mechanisms depending on the Li content of the film (yielding open EC adsorbed on the film or C 2 H 4 + CO 3 2- ) take place near the film/electrolyte and film/anode interfaces. Reaction products incorporate into the structure of the film and create a new kind of solid-electrolyte interphase layer.

Fabric-based active electrode design and fabrication for health monitoring clothing.

PubMed

Merritt, Carey R; Nagle, H Troy; Grant, Edward

2009-03-01

In this paper, two versions of fabric-based active electrodes are presented to provide a wearable solution for ECG monitoring clothing. The first version of active electrode involved direct attachment of surface-mountable components to a textile screen-printed circuit using polymer thick film techniques. The second version involved attaching a much smaller, thinner, and less obtrusive interposer containing the active electrode circuitry to a simplified textile circuit. These designs explored techniques for electronic textile interconnection, chip attachment to textiles, and packaging of circuits on textiles for durability. The results from ECG tests indicate that the performance of each active electrode is comparable to commercial Ag/AgCl electrodes. The interposer-based active electrodes survived a five-cycle washing test while maintaining good signal integrity.

Dietary sources of omega 3 fatty acids: public health risks and benefits.

PubMed

Tur, J A; Bibiloni, M M; Sureda, A; Pons, A

2012-06-01

Omega 3 fatty acids can be obtained from several sources, and should be added to the daily diet to enjoy a good health and to prevent many diseases. Worldwide, general population use omega-3 fatty acid supplements and enriched foods to get and maintain adequate amounts of these fatty acids. The aim of this paper was to review main scientific evidence regarding the public health risks and benefits of the dietary sources of omega-3 fatty acids. A systematic literature search was performed, and one hundred and forty-five articles were included in the results for their methodological quality. The literature described benefits and risks of algal, fish oil, plant, enriched dairy products, animal-derived food, krill oil, and seal oil omega-3 fatty acids.

Reduction of Electrolyte Components on a Coated Si Anode of Lithium-Ion Batteries

DOE PAGES

Gomez-Ballesteros, Jose L.; Balbuena, Perla B.

2017-07-07

Surface modification of Si anodes in Li-ion batteries by deposition of a thin alucone coating has demonstrated an effective way to help maintain a stable anode/electrolyte interface and good battery performance. In this paper, we investigate the interactions and reactivity of the film with electrolyte components using ab initio molecular dynamics simulations. Adsorption of solvent molecules (ethylene carbonate, EC) and salt (LiPF 6), and reduction by two mechanisms depending on the Li content of the film (yielding open EC adsorbed on the film or C 2H 4 + CO 3 2-) take place near the film/electrolyte and film/anode interfaces. Finally,more » reactions products incorporate to the structure of the film and create a new kind of solid-electrolyte interphase layer.« less

An automated LS(β)- NaI(Tl)(γ) coincidence system as absolute standard for radioactivity measurements.

PubMed

Joseph, Leena; Das, A P; Ravindra, Anuradha; Kulkarni, D B; Kulkarni, M S

2018-07-01

4πβ-γ coincidence method is a powerful and widely used method to determine the absolute activity concentration of radioactive solutions. A new automated liquid scintillator based coincidence system has been designed, developed, tested and established as absolute standard for radioactivity measurements. The automation is achieved using PLC (programmable logic controller) and SCADA (supervisory control and data acquisition). Radioactive solution of 60 Co was standardized to compare the performance of the automated system with proportional counter based absolute standard maintained in the laboratory. The activity concentrations determined using these two systems were in very good agreement; the new automated system can be used for absolute measurement of activity concentration of radioactive solutions. Copyright © 2018. Published by Elsevier Ltd.

Ebselen Preserves Tissue-Engineered Cell Sheets and their Stem Cells in Hypothermic Conditions

PubMed Central

Katori, Ryosuke; Hayashi, Ryuhei; Kobayashi, Yuki; Kobayashi, Eiji; Nishida, Kohji

2016-01-01

Clinical trials have been performed using autologous tissue-engineered epithelial cell sheets for corneal regenerative medicine. To improve stem cell-based therapy for convenient clinical practice, new techniques are required for preserving reconstructed tissues and their stem/progenitor cells until they are ready for use. In the present study, we screened potential preservative agents and developed a novel medium for preserving the cell sheets and their stem/progenitor cells; the effects were evaluated with a luciferase-based viability assay. Nrf2 activators, specifically ebselen, could maintain high ATP levels during preservation. Ebselen also showed a strong influence on maintenance of the viability, morphology, and stem cell function of the cell sheets preserved under hypothermia by protecting them from reactive oxygen species-induced damage. Furthermore, ebselen drastically improved the preservation performance of human cornea tissues and their stem cells. Therefore, ebselen shows good potential as a useful preservation agent in regenerative medicine as well as in cornea transplantation. PMID:27966584

Evaluation of the performance of irradiated silicon strip sensors for the forward detector of the ATLAS Inner Tracker Upgrade

NASA Astrophysics Data System (ADS)

Mori, R.; Allport, P. P.; Baca, M.; Broughton, J.; Chisholm, A.; Nikolopoulos, K.; Pyatt, S.; Thomas, J. P.; Wilson, J. A.; Kierstead, J.; Kuczewski, P.; Lynn, D.; Arratia-Munoz, M. I.; Hommels, L. B. A.; Ullan, M.; Fleta, C.; Fernandez-Tejero, J.; Bloch, I.; Gregor, I. M.; Lohwasser, K.; Poley, L.; Tackmann, K.; Trofimov, A.; Yildirim, E.; Hauser, M.; Jakobs, K.; Kuehn, S.; Mahboubi, K.; Parzefall, U.; Clark, A.; Ferrere, D.; Sevilla, S. Gonzalez; Ashby, J.; Blue, A.; Bates, R.; Buttar, C.; Doherty, F.; McMullen, T.; McEwan, F.; O'Shea, V.; Kamada, S.; Yamamura, K.; Ikegami, Y.; Nakamura, K.; Takubo, Y.; Unno, Y.; Takashima, R.; Chilingarov, A.; Fox, H.; Affolder, A. A.; Casse, G.; Dervan, P.; Forshaw, D.; Greenall, A.; Wonsak, S.; Wormald, M.; Cindro, V.; Kramberger, G.; Mandić, I.; Mikuž, M.; Gorelov, I.; Hoeferkamp, M.; Palni, P.; Seidel, S.; Taylor, A.; Toms, K.; Wang, R.; Hessey, N. P.; Valencic, N.; Hanagaki, K.; Dolezal, Z.; Kodys, P.; Bohm, J.; Stastny, J.; Mikestikova, M.; Bevan, A.; Beck, G.; Milke, C.; Domingo, M.; Fadeyev, V.; Galloway, Z.; Hibbard-Lubow, D.; Liang, Z.; Sadrozinski, H. F.-W.; Seiden, A.; To, K.; French, R.; Hodgson, P.; Marin-Reyes, H.; Parker, K.; Jinnouchi, O.; Hara, K.; Sato, K.; Sato, K.; Hagihara, M.; Iwabuchi, S.; Bernabeu, J.; Civera, J. V.; Garcia, C.; Lacasta, C.; Garcia, S. Marti i.; Rodriguez, D.; Santoyo, D.; Solaz, C.; Soldevila, U.

2016-09-01

The upgrade to the High-Luminosity LHC foreseen in about ten years represents a great challenge for the ATLAS inner tracker and the silicon strip sensors in the forward region. Several strip sensor designs were developed by the ATLAS collaboration and fabricated by Hamamatsu in order to maintain enough performance in terms of charge collection efficiency and its uniformity throughout the active region. Of particular attention, in the case of a stereo-strip sensor, is the area near the sensor edge where shorter strips were ganged to the complete ones. In this work the electrical and charge collection test results on irradiated miniature sensors with forward geometry are presented. Results from charge collection efficiency measurements show that at the maximum expected fluence, the collected charge is roughly halved with respect to the one obtained prior to irradiation. Laser measurements show a good signal uniformity over the sensor. Ganged strips have a similar efficiency as standard strips.

Nitrogen removal performance and loading capacity of a novel single-stage nitritation-anammox system with syntrophic micro-granules.

PubMed

Wang, Shaopo; Liu, Yuan; Niu, Qigui; Ji, Jiayuan; Hojo, Toshimasa; Li, Yu-You

2017-07-01

The operation performance of a novel micro-granule based syntrophic system of nitritation and anammox was studied by controlling the oxygen concentration and maintaining a constant temperature of 25°C. With the oxygen concentration of around 0.11 (<0.15)mg/L, the single-stage nitritation-anammox system was startup successfully at a nitrogen loading rate (NLR) of 1.5kgN/m 3 /d. The reactor was successfully operated at volumetric N loadings ranging from 0.5 to 2.5kgN/m 3 /d with a high nitrogen removal of 82%. The microbial community was composed by ammonia oxidizing bacteria (AOB) and anammox bacteria forming micro-granules with an average diameter of 0.8mm and good settleability. Results from pyrosequencing analysis revealed that Ca. Kuenenia and Nitrosomonas were selected and enriched in the community over the startup period, and these were identified as the dominant anammox bacteria and AOB species, respectively. Copyright © 2017 Elsevier Ltd. All rights reserved.

An embedded vision system for an unmanned four-rotor helicopter

NASA Astrophysics Data System (ADS)

Lillywhite, Kirt; Lee, Dah-Jye; Tippetts, Beau; Fowers, Spencer; Dennis, Aaron; Nelson, Brent; Archibald, James

2006-10-01

In this paper an embedded vision system and control module is introduced that is capable of controlling an unmanned four-rotor helicopter and processing live video for various law enforcement, security, military, and civilian applications. The vision system is implemented on a newly designed compact FPGA board (Helios). The Helios board contains a Xilinx Virtex-4 FPGA chip and memory making it capable of implementing real time vision algorithms. A Smooth Automated Intelligent Leveling daughter board (SAIL), attached to the Helios board, collects attitude and heading information to be processed in order to control the unmanned helicopter. The SAIL board uses an electrolytic tilt sensor, compass, voltage level converters, and analog to digital converters to perform its operations. While level flight can be maintained, problems stemming from the characteristics of the tilt sensor limits maneuverability of the helicopter. The embedded vision system has proven to give very good results in its performance of a number of real-time robotic vision algorithms.

Vanadium Dioxide Nanoparticle-based Thermochromic Smart Coating: High Luminous Transmittance, Excellent Solar Regulation Efficiency, and Near Room Temperature Phase Transition.

PubMed

Zhu, Jingting; Zhou, Yijie; Wang, Bingbing; Zheng, Jianyun; Ji, Shidong; Yao, Heliang; Luo, Hongjie; Jin, Ping

2015-12-23

An annealing-assisted preparation method of well-crystallized VxW1-xO2(M)@SiO2 core-shell nanoparticles for VO2-based thermochromic smart coatings (VTSC) is presented. The additional annealing process reduces the defect density of the initial hydrothermally prepared VxW1-xO2(M) nanoparticles and enhances their crystallinity so that the thermochromic film based on VxW1-xO2(M)@SiO2 nanoparticles can exhibit outstanding thermochromic performance with balanced solar regulation efficiency (ΔTsol) of 17.3%, luminous transmittance (Tlum) up to 52.2%, and critical phase transition temperature (Tc) around 40.4 °C, which is very promising for practical application. Furthermore, it makes great progress in reducing Tc of VTSC to near room temperature (25.2 °C) and simutaneously maintaining excellent optical properties (ΔTsol = 14.7% and Tlum = 50.6%). Such thermochromic performance is good enough to make VTSC applicable to practical architecture.

A novel teaching system for industrial robots.

PubMed

Lin, Hsien-I; Lin, Yu-Hsiang

2014-03-27

The most important tool for controlling an industrial robotic arm is a teach pendant, which controls the robotic arm movement in work spaces and accomplishes teaching tasks. A good teaching tool should be easy to operate and can complete teaching tasks rapidly and effortlessly. In this study, a new teaching system is proposed for enabling users to operate robotic arms and accomplish teaching tasks easily. The proposed teaching system consists of the teach pen, optical markers on the pen, a motion capture system, and the pen tip estimation algorithm. With the marker positions captured by the motion capture system, the pose of the teach pen is accurately calculated by the pen tip algorithm and used to control the robot tool frame. In addition, Fitts' Law is adopted to verify the usefulness of this new system, and the results show that the system provides high accuracy, excellent operation performance, and a stable error rate. In addition, the system maintains superior performance, even when users work on platforms with different inclination angles.

A Novel Teaching System for Industrial Robots

PubMed Central

Lin, Hsien-I; Lin, Yu-Hsiang

2014-01-01

The most important tool for controlling an industrial robotic arm is a teach pendant, which controls the robotic arm movement in work spaces and accomplishes teaching tasks. A good teaching tool should be easy to operate and can complete teaching tasks rapidly and effortlessly. In this study, a new teaching system is proposed for enabling users to operate robotic arms and accomplish teaching tasks easily. The proposed teaching system consists of the teach pen, optical markers on the pen, a motion capture system, and the pen tip estimation algorithm. With the marker positions captured by the motion capture system, the pose of the teach pen is accurately calculated by the pen tip algorithm and used to control the robot tool frame. In addition, Fitts' Law is adopted to verify the usefulness of this new system, and the results show that the system provides high accuracy, excellent operation performance, and a stable error rate. In addition, the system maintains superior performance, even when users work on platforms with different inclination angles. PMID:24681669

Nanosized CoO Loaded on Copper Foam for High-Performance, Binder-Free Lithium-Ion Batteries.

PubMed

Liao, Mingna; Zhang, Qilun; Tang, Fengling; Xu, Zhiwei; Zhou, Xin; Li, Youpeng; Zhang, Yali; Yang, Chenghao; Ru, Qiang; Zhao, Lingzhi

2018-03-22

The synthesis of nanosized CoO anodes with unique morphologies via a hydrothermal method is investigated. By adjusting the pH values of reaction solutions, nanoflakes (CoO-NFs) and nanoflowers (CoO-FLs) are successfully located on copper foam. Compared with CoO-FLs, CoO-NFs as anodes for lithium ion batteries present ameliorated lithium storage properties, such as good rate capability, excellent cycling stability, and large CoO nanoflakes; CoO nanoflowers; anodes; binder free; lithium ion batteriesreversible capacity. The initial discharge capacity is 1470 mA h g -1 , while the reversible capacity is maintained at 1776 m Ah g -1 after 80 cycles at a current density of 100 mA h g -1 . The excellent electrochemical performance is ascribed to enough free space and enhanced conductivity, which play crucial roles in facilitating electron transport during repetitive Li⁺ intercalation and extraction reaction as well as buffering the volume expansion.

Free-standing hierarchically sandwich-type tungsten disulfide nanotubes/graphene anode for lithium-ion batteries.

PubMed

Chen, Renjie; Zhao, Teng; Wu, Weiping; Wu, Feng; Li, Li; Qian, Ji; Xu, Rui; Wu, Huiming; Albishri, Hassan M; Al-Bogami, A S; El-Hady, Deia Abd; Lu, Jun; Amine, Khalil

2014-10-08

Transition metal dichalcogenides (TMD), analogue of graphene, could form various dimensionalities. Similar to carbon, one-dimensional (1D) nanotube of TMD materials has wide application in hydrogen storage, Li-ion batteries, and supercapacitors due to their unique structure and properties. Here we demonstrate the feasibility of tungsten disulfide nanotubes (WS2-NTs)/graphene (GS) sandwich-type architecture as anode for lithium-ion batteries for the first time. The graphene-based hierarchical architecture plays vital roles in achieving fast electron/ion transfer, thus leading to good electrochemical performance. When evaluated as anode, WS2-NTs/GS hybrid could maintain a capacity of 318.6 mA/g over 500 cycles at a current density of 1A/g. Besides, the hybrid anode does not require any additional polymetric binder, conductive additives, or a separate metal current-collector. The relatively high density of this hybrid is beneficial for high capacity per unit volume. Those characteristics make it a potential anode material for light and high-performance lithium-ion batteries.

Ebselen Preserves Tissue-Engineered Cell Sheets and their Stem Cells in Hypothermic Conditions.

PubMed

Katori, Ryosuke; Hayashi, Ryuhei; Kobayashi, Yuki; Kobayashi, Eiji; Nishida, Kohji

2016-12-14

Clinical trials have been performed using autologous tissue-engineered epithelial cell sheets for corneal regenerative medicine. To improve stem cell-based therapy for convenient clinical practice, new techniques are required for preserving reconstructed tissues and their stem/progenitor cells until they are ready for use. In the present study, we screened potential preservative agents and developed a novel medium for preserving the cell sheets and their stem/progenitor cells; the effects were evaluated with a luciferase-based viability assay. Nrf2 activators, specifically ebselen, could maintain high ATP levels during preservation. Ebselen also showed a strong influence on maintenance of the viability, morphology, and stem cell function of the cell sheets preserved under hypothermia by protecting them from reactive oxygen species-induced damage. Furthermore, ebselen drastically improved the preservation performance of human cornea tissues and their stem cells. Therefore, ebselen shows good potential as a useful preservation agent in regenerative medicine as well as in cornea transplantation.

One-Dimensional Cu2- xSe Nanorods as the Cathode Material for High-Performance Aluminum-Ion Battery.

PubMed

Jiang, Jiali; Li, He; Fu, Tao; Hwang, Bing-Joe; Li, Xue; Zhao, Jinbao

2018-05-30

In this work, nonstoichiometric Cu 2- x Se fabricated by a facile water evaporation process is used as high-performance Al-ion battery cathode materials. Cu 2- x Se electrodes show high reversible capacity and excellent cycling stability, even at a high current density of 200 mA g -1 , the specific charge capacity in the initial cycle is 241 mA h g -1 and maintains 100 mA h g -1 after 100 cycles with a Coulombic efficiency of 96.1%, showing good capacity retention. The prominent kinetics of Cu 2- x Se electrodes is also revealed by the GITT, which is attributed to the ultrahigh electronic conductivity of the Cu 2- x Se material. Most importantly, an extensive research is dedicated to investigating the detailed intercalation and de-intercalation of relatively large chloroaluminate anions into the cubic Cu 2- x Se, which is conducive to better understand the reaction mechanism of the Al/Cu 2- x Se battery.

An Enhanced UV-Vis-NIR an d Flexible Photodetector Based on Electrospun ZnO Nanowire Array/PbS Quantum Dots Film Heterostructure.

PubMed

Zheng, Zhi; Gan, Lin; Zhang, Jianbing; Zhuge, Fuwei; Zhai, Tianyou

2017-03-01

ZnO nanostructure-based photodetectors have a wide applications in many aspects, however, the response range of which are mainly restricted in the UV region dictated by its bandgap. Herein, UV-vis-NIR sensitive ZnO photodetectors consisting of ZnO nanowires (NW) array/PbS quantum dots (QDs) heterostructures are fabricated through modified electrospining method and an exchanging process. Besides wider response region compared to pure ZnO NWs based photodetectors, the heterostructures based photodetectors have faster response and recovery speed in UV range. Moreover, such photodetectors demonstrate good flexibility as well, which maintain almost constant performances under extreme (up to 180°) and repeat (up to 200 cycles) bending conditions in UV-vis-NIR range. Finally, this strategy is further verified on other kinds of 1D nanowires and 0D QDs, and similar enhancement on the performance of corresponding photodetecetors can be acquired, evidencing the universality of this strategy.

Fabrication and Characterization of Thin Film Nickel Hydroxide Electrodes for Micropower Applications.

PubMed

Falahati, Hamid; Kim, Edward; Barz, Dominik P J

2015-06-17

The utilization of micropower sources is attractive in portable microfluidic devices where only low-power densities and energy contents are required. In this work, we report on the microfabrication of patterned α-Ni(OH)2 films on glass substrates which can be used for rechargeable microbatteries as well as for microcapacitors. A multilayer deposition technique is developed based on e-beam evaporation, ultraviolet lithography, and electroplating/electrodeposition which creates thin-film electrodes that are patterned with arrays of micropillars. The morphology and the structure of the patterned electrode films are characterized by employing field emission scanning electron microscopy. The chemical (elemental) composition is investigated by using X-ray diffraction and X-ray photoelectron spectroscopy. Finally, cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge/discharge measurements are used to evaluate the electrochemical performance of the patterned thin film electrodes compared to patternless electrodes. We observe that patterning of the electrodes results in significantly improved stability and, thus, longer endurance while good electrochemical performance is maintained.

Unsteady Probabilistic Analysis of a Gas Turbine System

NASA Technical Reports Server (NTRS)

Brown, Marilyn

2003-01-01

In this work, we have considered an annular cascade configuration subjected to unsteady inflow conditions. The unsteady response calculation has been implemented into the time marching CFD code, MSUTURBO. The computed steady state results for the pressure distribution demonstrated good agreement with experimental data. We have computed results for the amplitudes of the unsteady pressure over the blade surfaces. With the increase in gas turbine engine structural complexity and performance over the past 50 years, structural engineers have created an array of safety nets to ensure against component failures in turbine engines. In order to reduce what is now considered to be excessive conservatism and yet maintain the same adequate margins of safety, there is a pressing need to explore methods of incorporating probabilistic design procedures into engine development. Probabilistic methods combine and prioritize the statistical distributions of each design variable, generate an interactive distribution and offer the designer a quantified relationship between robustness, endurance and performance. The designer can therefore iterate between weight reduction, life increase, engine size reduction, speed increase etc.

Amorphous TiO2 Shells: A Vital Elastic Buffering Layer on Silicon Nanoparticles for High-Performance and Safe Lithium Storage.

PubMed

Yang, Jianping; Wang, Yunxiao; Li, Wei; Wang, Lianjun; Fan, Yuchi; Jiang, Wan; Luo, Wei; Wang, Yang; Kong, Biao; Selomulya, Cordelia; Liu, Hua Kun; Dou, Shi Xue; Zhao, Dongyuan

2017-12-01

Smart surface coatings of silicon (Si) nanoparticles are shown to be good examples for dramatically improving the cyclability of lithium-ion batteries. Most coating materials, however, face significant challenges, including a low initial Coulombic efficiency, tedious processing, and safety assessment. In this study, a facile sol-gel strategy is demonstrated to synthesize commercial Si nanoparticles encapsulated by amorphous titanium oxide (TiO 2 ), with core-shell structures, which show greatly superior electrochemical performance and high-safety lithium storage. The amorphous TiO 2 shell (≈3 nm) shows elastic behavior during lithium discharging and charging processes, maintaining high structural integrity. Interestingly, it is found that the amorphous TiO 2 shells offer superior buffering properties compared to crystalline TiO 2 layers for unprecedented cycling stability. Moreover, accelerating rate calorimetry testing reveals that the TiO 2 -encapsulated Si nanoparticles are safer than conventional carbon-coated Si-based anodes. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Layered conductive polymer on nylon membrane templates for high performance, thin-film supercapacitor electrodes

NASA Astrophysics Data System (ADS)

Shi, HaoTian Harvey; Naguib, Hani E.

2016-04-01

Flexible Thin-film Electrochemical Capacitors (ECs) are emerging technology that plays an important role as energy supply for various electronics system for both present era and the future. Intrinsically conductive polymers (ICPs) are promising pseudo-capacitive materials as they feature both good electrical conductivity and high specific capacitance. This study focuses on the construction and characterization of ultra-high surface area porous electrodes based on coating of nano-sized conductive polymer materials on nylon membrane templates. Herein, a novel nano-engineered electrode material based on nylon membranes was presented, which allows the creation of super-capacitor devices that is capable of delivering competitive performance, while maintaining desirable mechanical characteristics. With the formation of a highly conductive network with the polyaniline nano-layer, the electrical conductivity was also increased dramatically to facilitate the charge transfer process. Cyclic voltammetry and specific capacitance results showed promising application of this type of composite materials for future smart textile applications.

Experimental multiplexing of quantum key distribution with classical optical communication

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Liu-Jun; Chen, Luo-Kan; Ju, Lei

2015-02-23

We demonstrate the realization of quantum key distribution (QKD) when combined with classical optical communication, and synchronous signals within a single optical fiber. In the experiment, the classical communication sources use Fabry-Pérot (FP) lasers, which are implemented extensively in optical access networks. To perform QKD, multistage band-stop filtering techniques are developed, and a wavelength-division multiplexing scheme is designed for the multi-longitudinal-mode FP lasers. We have managed to maintain sufficient isolation among the quantum channel, the synchronous channel and the classical channels to guarantee good QKD performance. Finally, the quantum bit error rate remains below a level of 2% across themore » entire practical application range. The proposed multiplexing scheme can ensure low classical light loss, and enables QKD over fiber lengths of up to 45 km simultaneously when the fibers are populated with bidirectional FP laser communications. Our demonstration paves the way for application of QKD to current optical access networks, where FP lasers are widely used by the end users.« less

Numerical modeling of a 2K J-T heat exchanger used in Fermilab Vertical Test Stand VTS-1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gupta, Prabhat Kumar; Rabehl, Roger

2014-07-01

Fermilab Vertical Test Stand-1 (VTS-1) is in operation since 2007 for testing the superconducting RF cavities at 2 K. This test stand has single layer coiled finned tubes heat exchanger before J-T valve. A finite difference based thermal model has been developed in Engineering Equation Solver (EES) to study its thermal performance during filling and refilling to maintain the constant liquid level of test stand. The model is also useful to predict its performance under other various operating conditions and will be useful to design the similar kind of heat exchanger for future needs. Present paper discusses the different operationalmore » modes of this heat exchanger and its thermal characteristics under these operational modes. Results of this model have also been compared with the experimental data gathered from the VTS-1 heat exchanger and they are in good agreement with the present model.« less

Image degradation by glare in radiologic display devices

NASA Astrophysics Data System (ADS)

Badano, Aldo; Flynn, Michael J.

1997-05-01

No electronic devices are currently available that can display digital radiographs without loss of visual information compared to traditional transilluminated film. Light scattering within the glass faceplate of cathode-ray tube (CRT) devices causes excessive glare that reduces image contrast. This glare, along with ambient light reflection, has been recognized as a significant limitation for radiologic applications. Efforts to control the effect of glare and ambient light reflection in CRTs include the use of absorptive glass and thin film coatings. In the near future, flat panel displays (FPD) with thin emissive structures should provide very low glare, high performance devices. We have used an optical Monte Carlo simulation to evaluate the effect of glare on image quality for typical CRT and flat panel display devices. The trade-off between display brightness and image contrast is described. For CRT systems, achieving good glare ratio requires a reduction of brightness to 30-40 percent of the maximum potential brightness. For FPD systems, similar glare performance can be achieved while maintaining 80 percent of the maximum potential brightness.

High-strain slide-ring shape-memory polycaprolactone-based polyurethane.

PubMed

Wu, Ruiqing; Lai, Jingjuan; Pan, Yi; Zheng, Zhaohui; Ding, Xiaobin

2018-06-06

To enable shape-memory polymer networks to achieve recoverable high deformability with a simultaneous high shape-fixity ratio and shape-recovery ratio, novel semi-crystalline slide-ring shape-memory polycaprolactone-based polyurethane (SR-SMPCLU) with movable net-points constructed by a topologically interlocked slide-ring structure was designed and fabricated. The SR-SMPCLU not only exhibited good shape fixity, almost complete shape recovery, and a fast shape-recovery speed, it also showed an outstanding recoverable high-strain capacity with 95.83% Rr under a deformation strain of 1410% due to the pulley effect of the topological slide-ring structure. Furthermore, the SR-SMPCLU system maintained excellent shape-memory performance with increasing the training cycle numbers at 45% and even 280% deformation strain. The effects of the slide-ring cross-linker content, deformation strain, and successive shape-memory cycles on the shape-memory performance were investigated. A possible mechanism for the shape-memory effect of the SR-SMPCLU system is proposed.

78 FR 987 - Hazardous Materials: Harmonization with International Standards (RRR)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-07

...PHMSA is amending the Hazardous Materials Regulations to maintain alignment with international standards by incorporating various amendments, including changes to proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport quantity limitations, and vessel stowage requirements. These revisions are necessary to harmonize the Hazardous Materials Regulations (HMR) with recent changes made to the International Maritime Dangerous Goods (IMDG) Code, the International Civil Aviation Organization's Technical Instructions for the Safe Transport of Dangerous Goods by Air (ICAO Technical Instructions), and the United Nations Recommendations on the Transport of Dangerous Goods--Model Regulations (UN Model Regulations) and address a petition for rulemaking.

40 CFR 61.162 - Emission limits.

Code of Federal Regulations, 2014 CFR

2014-07-01

... maintain the furnace and associated air pollution control equipment in a manner consistent with good air... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS National Emission Standard for Inorganic Arsenic Emissions...

40 CFR 61.162 - Emission limits.

Code of Federal Regulations, 2011 CFR

2011-07-01

... maintain the furnace and associated air pollution control equipment in a manner consistent with good air... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS National Emission Standard for Inorganic Arsenic Emissions...

40 CFR 61.162 - Emission limits.

Code of Federal Regulations, 2013 CFR

2013-07-01

... maintain the furnace and associated air pollution control equipment in a manner consistent with good air... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS National Emission Standard for Inorganic Arsenic Emissions...

40 CFR 61.162 - Emission limits.

Code of Federal Regulations, 2010 CFR

2010-07-01

... maintain the furnace and associated air pollution control equipment in a manner consistent with good air... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS National Emission Standard for Inorganic Arsenic Emissions...

40 CFR 61.162 - Emission limits.

Code of Federal Regulations, 2012 CFR

2012-07-01

... maintain the furnace and associated air pollution control equipment in a manner consistent with good air... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS National Emission Standard for Inorganic Arsenic Emissions...

Toilet privacy in hospital.

PubMed

Logan, Karen

Good practice in toilet management and continence promotion can help hospital patients to maintain their dignity. This article reports on an audit that highlighted the issues important to patients and nurses in terms of improving privacy and dignity for inpatients using the toilet.

[Perioperative management of a child with central diabetes insipidus who underwent two surgeries before and after desmopressin administration].

PubMed

Kiriyama, Keiji; Tachibana, Kazuya; Nishimura, Nobuyuki; Takeuchi, Muneyuki; Kinouchi, Keiko

2013-03-01

A 14-year-old girl weighing 32 kg was diagnosed with suprasellar tumor causing hydrocephalus, hypothyroidism, adrenal dysfunction and central diabetes insipidus. She was treated with levothyroxine and hydrocortisone and urged to take fluid to replace urine. She was scheduled to undergo ventricular drainage to relieve hydrocephalus prior to tumor resection. For the first surgery, desmopressin was not started and urine output reached 4,000 to 6,000 ml x day(-1), urine osmolality 64 mOsm x l(-1) and urine specific gravity 1.002. Anesthesia was induced with sevoflurane and maintained with propofol and remifentanil. Maintenance fluid was with acetated Ringer's solution and urine loss was replaced with 5% dextrose. Bradycardia and hypotension occurred after intubation, which was treated with volume load. Infusion volume was 750 ml and urine output was 1100 ml during 133 min of anesthesia. Postoperative day 1 nasal desmopressin was started. Ten days later, partial tumor resection was performed. Anesthesia was induced with propofol and fentanyl and maintained with sevoflurane and remifentanil. Infusion volume was 610 ml, urine output 380 ml, and blood loss 151 ml during 344 min of anesthesia. Hemodynamic parameters were stable throughout the procedure. Pathology of the tumor was revealed to be germinoma. Bradycardia and hypotension experienced during the first surgery was suspected to be caused by preoperative hypovolemia brought by polyuria. Desmopressin was proved to be effective to treat excessive urine output and to maintain good perioperative water balance.

Polarization-maintaining performance of large effective area, higher order modes fiber in a coiled configuration

NASA Astrophysics Data System (ADS)

Ahmad, Raja; Nicholson, Jeffrey W.; Abedin, Kazi S.; Westbrook, Paul S.; Headley, Clifford; Wisk, Patrick W.; Monberg, Eric M.; Yan, Man F.; DiGiovanni, David J.

2018-02-01

Scaling the power-level of fiber sources has many practical advantages, while also enabling fundamental studies on the light-matter interaction in amorphous guiding media. In order to scale the power-level of fiber-sources without encountering nonlinear impairments, a strategy is to increase the effective-area of the guided optical-mode. Increasing the effective-area of the fundamental mode in a fiber, however, presents the challenges of increased susceptibility to mode-distortion and effective-area-reduction under the influence of bends. Therefore, higher-order-mode (HOM) fibers, which guide light in large effective-area (Aeff) Bessel-like modes, are a good candidate for scaling the power-level of robust fiber-sources. Many applications of high-power fiber-sources also demand a deterministic control on the polarization-state of light. Furthermore, a polarization-maintaining (PM)-type HOM fiber can afford the added possibility of coherent-beam combination and polarization multiplexing of high-power fiber-lasers. Previously, we reported polarization-maintaining operation in a 1.3 m length of PM-HOM fiber that was held straight. The PM-HOM fiber guided Bessel-like modes with Aeff ranging from 1200-2800 μm2. In this work, we report, for the first time, that the polarization-extinction-ratio (PER) of the HOM exceeds 10 dB in an 8 m long fiber that is coiled down to a diameter of 40 cm. This opens a path towards compact and polarization-controlled high-power fiber-systems.

Determining team cognition from delay analysis using cross recurrence plot.

PubMed

Hajari, Nasim; Cheng, Irene; Bin Zheng; Basu, Anup

2016-08-01

Team cognition is an important factor in evaluating and determining team performance. Forming a team with good shared cognition is even more crucial for laparoscopic surgery applications. In this study, we analyzed the eye tracking data of two surgeons during a laparoscopic simulation operation, then performed Cross Recurrence Analysis (CRA) on the recorded data to study the delay behaviour for good performer and poor performer teams. Dual eye tracking data for twenty two dyad teams were recorded during a laparoscopic task and then the teams were divided into good performer and poor performer teams based on the task times. Eventually we studied the delay between two team members for good and poor performer teams. The results indicated that the good performer teams show a smaller delay comparing to poor performer teams. This study is compatible with gaze overlap analysis between team members and therefore it is a good evidence of shared cognition between team members.

The development and functional control of reading-comprehension behavior.

PubMed

Rosenbaum, M S; Breiling, J

1976-01-01

Reading comprehension, indicated by motor behavior and multiple-choice picture selection called for in written instructions, was taught to an autistic child using verbal prompts, modelling, and physical guidance. The child was rewarded for correct behaviors to training items; nonrewarded probes were used to assess generalization. Probable maintaining events were assessed through their sequential removal in a reversal design. Results showed: (a) following acquisition, performance was maintained at a near-100% level when candy, praise, attention, and training were removed, (b) absence of other persons was correlated with a marked decrease in performance, whereas their presence was associated with performance at near 100%, and (c) performance generalized to probes and across experimenters. Rewards, which may have been reinforcing during acquisition, did not appear necessary to maintain later performance. Instead, presence of others (a setting event) was demonstrated to have control over maintained performance.

Heterogeneity for IGF-II production maintained by public goods dynamics in neuroendocrine pancreatic cancer.

PubMed

Archetti, Marco; Ferraro, Daniela A; Christofori, Gerhard

2015-02-10

The extensive intratumor heterogeneity revealed by sequencing cancer genomes is an essential determinant of tumor progression, diagnosis, and treatment. What maintains heterogeneity remains an open question because competition within a tumor leads to a strong selection for the fittest subclone. Cancer cells also cooperate by sharing molecules with paracrine effects, such as growth factors, and heterogeneity can be maintained if subclones depend on each other for survival. Without strict interdependence between subclones, however, nonproducer cells can free-ride on the growth factors produced by neighboring producer cells, a collective action problem known in game theory as the "tragedy of the commons," which has been observed in microbial cell populations. Here, we report that similar dynamics occur in cancer cell populations. Neuroendocrine pancreatic cancer (insulinoma) cells that do not produce insulin-like growth factor II (IGF-II) grow slowly in pure cultures but have a proliferation advantage in mixed cultures, where they can use the IGF-II provided by producer cells. We show that, as predicted by evolutionary game theory, producer cells do not go extinct because IGF-II acts as a nonlinear public good, creating negative frequency-dependent selection that leads to a stable coexistence of the two cell types. Intratumor cell heterogeneity can therefore be maintained even without strict interdependence between cell subclones. Reducing the amount of growth factors available within a tumor may lead to a reduction in growth followed by a new equilibrium, which may explain relapse in therapies that target growth factors.

Maintenance of antemortem dental records in private dental clinics: Knowledge, attitude, and practice among the practitioners of Mangalore and surrounding areas

PubMed Central

Wadhwani, Surbhi; Shetty, Pushparaja; Sreelatha, S. V.

2017-01-01

Introduction: With time, an increase in the number of crimes, mass disasters, and wars, has led to the identification of the deceased or assailant critical. In such circumstances, antemortem dental records play a crucial role. Materials and Methods: A cross-sectional survey involved 95 dentists practicing in and around Mangalore. The structured questionnaire comprised 24 questions regarding the practice of maintenance of dental records. The questionnaire was given either personally or sent by post. The data obtained was subjected to descriptive analysis. Results: With 87% of the dentists maintaining records, only 31% of them recorded all the details required to be present in a dental record. Of these 18% of them maintained the records for >5 years. Conclusion: The results suggest that most of the practicing dentists in this area either do not maintain or maintain inadequate records, which is alarming. Thus, there is a need to set protocols to increase the awareness for maintaining good dental records. PMID:29263612

Women's work. Maintaining a healthy body weight.

PubMed

Welch, Nicky; Hunter, Wendy; Butera, Karina; Willis, Karen; Cleland, Verity; Crawford, David; Ball, Kylie

2009-08-01

This study describes women's perceptions of the supports and barriers to maintaining a healthy weight among currently healthy weight women from urban and rural socio-economically disadvantaged areas. Using focus groups and interviews, we asked women about their experiences of maintaining a healthy weight. Overwhelmingly, women described their healthy weight practices in terms of concepts related to work and management. The theme of 'managing health' comprised issues of managing multiple responsibilities, time, and emotions associated with healthy practices. Rural women faced particular difficulties in accessing supports at a practical level (for example, lack of childcare) and due to the gendered roles they enacted in caring for others. Family background (in particular, mothers' attitudes to food and weight) also appeared to influence perceptions about healthy weight maintenance. In the context of global increases in the prevalence of obesity, the value of initiatives aimed at supporting healthy weight women to maintain their weight should not be under-estimated. Such initiatives need to work within the social and personal constraints that women face in maintaining good health.

Cold-Weather Engineering, Chapters 1 to 5

DTIC Science & Technology

1949-01-01

adäquate^, except under- extreme con~ ditiOns. of heat loss.. Milkr-Qrie ’pint or mo:re daily;. Eva-? poiiated or powdered milk is- $xistr äs good...as fi;esh milk . Egga^One or two, per day. Dehydrated ¥ggs are- äs good as- fresh eggs.-. Meat-One serving per day> ._ Äth some fat/ Liver...it.i Material for building, maintaining/ and lubricating the human engine is -obtained’ from proteins’ %ae.at;, fish, - milk ,, eggs), and

The need for scientific software engineering in the pharmaceutical industry

NASA Astrophysics Data System (ADS)

Luty, Brock; Rose, Peter W.

2017-03-01

Scientific software engineering is a distinct discipline from both computational chemistry project support and research informatics. A scientific software engineer not only has a deep understanding of the science of drug discovery but also the desire, skills and time to apply good software engineering practices. A good team of scientific software engineers can create a software foundation that is maintainable, validated and robust. If done correctly, this foundation enable the organization to investigate new and novel computational ideas with a very high level of efficiency.

The need for scientific software engineering in the pharmaceutical industry.

PubMed

Luty, Brock; Rose, Peter W

2017-03-01

Scientific software engineering is a distinct discipline from both computational chemistry project support and research informatics. A scientific software engineer not only has a deep understanding of the science of drug discovery but also the desire, skills and time to apply good software engineering practices. A good team of scientific software engineers can create a software foundation that is maintainable, validated and robust. If done correctly, this foundation enable the organization to investigate new and novel computational ideas with a very high level of efficiency.

Medical records. Enhancing privacy, preserving the common good.

PubMed

Etzioni, A

1999-01-01

Personal medical information is now bought and sold on the open market. Companies use it to make hiring and firing decisions and to identify customers for new products. The justification for providing such access to medical information is that doing so benefits the public by securing public safety, controlling costs, and supporting medical research. And individuals have supposedly consented to it. But we can achieve the common goods while better protecting privacy by making institutional changes in the way information is maintained and protected.

Good surgeon: A search for meaning.

PubMed

Akopov, Andrey L; Artioukh, Dmitri Y

2017-01-01

The art and philosophy of surgery are not as often discussed as scientific discoveries and technological advances in the modern era of surgery. Although these are difficult to teach and pass on to the next generations of surgeons they are no less important for training good surgeons and maintaining their high standards. The authors of this review and opinion article tried to define what being a good surgeon really means and to look into the subject by analysing the essential conditions for being a good surgeon and the qualities that such a specialist should possess. In addition to a strong theoretic knowledge and practical skills and among the several described professional and personal characteristics, a good surgeon is expected to have common sense. It enables a surgeon to make a sound practical judgment independent of specialized medical knowledge and training. The possible ways of developing and/or enhancing common sense during surgical training and subsequent practice require separate analysis.

Education, Virtue, and Democracy in the Work of Emile Durkheim.

ERIC Educational Resources Information Center

Cladis, Mark S.

1995-01-01

Contends that a public education similar to that proposed by Emile Durkheim is a condition for a flourishing liberal society. Maintains that Durkheim merged standard liberal and communitarian values by supporting both individual rights and the common good. (CFR)

Uncertainty-based tradeoff analysis methodology for integrated transportation investment decision-making.

DOT National Transportation Integrated Search

2009-10-28

Transportation agencies strive to maintain their systems in good condition and also to provide : acceptable levels of service to users. However, funding is often inadequate to meet the needs : of system preservation and expansion, and thus performanc...

Bribes for Behaving: Why Behaviorism Doesn't Help Children Become Good People.

ERIC Educational Resources Information Center

Kohn, Alfie

1994-01-01

Argues against using punishment and rewards to motivate children, maintaining that, although penalties and prizes may change behavior in the short term, they do not help children become responsible decision makers in the long term. (MDM)

40 CFR 63.802 - Emission limits.

Code of Federal Regulations, 2014 CFR

2014-07-01

... meet the upholstered seating flammability requirements of California Technical Bulletin 116, 117, or... owner or operator must operate and maintain any affected source, including associated air pollution control equipment and monitoring equipment, in a manner consistent with safety and good air pollution...

40 CFR 63.802 - Emission limits.

Code of Federal Regulations, 2013 CFR

2013-07-01

... meet the upholstered seating flammability requirements of California Technical Bulletin 116, 117, or... owner or operator must operate and maintain any affected source, including associated air pollution control equipment and monitoring equipment, in a manner consistent with safety and good air pollution...

Resilience and Acculturation among Unaccompanied Refugee Minors

ERIC Educational Resources Information Center

Keles, Serap; Friborg, Oddgeir; Idsøe, Thormod; Sirin, Selcuk; Oppedal, Brit

2018-01-01

The present study was designed to understand differences between unaccompanied refugees who retained or achieved good mental health ("healthy" or "resilient") and those who maintained or developed poor mental health ("clinical" and "vulnerable"). Using person-based analyses, the role of pre-migration…

Preventing Infectious Disease in Sports.

ERIC Educational Resources Information Center

Howe, Warren B.

2003-01-01

Preventing infectious disease in sports is fundamental to maintaining team effectiveness and helping athletes avoid the adverse effects of illness. Good hygiene, immunization, minimal exposure to specific diseases, and certain prophylactic measures are essential. Teammates, coaches, trainers, officials, healthcare providers, and community public…

The Exercise Capacity of Blind Children.

ERIC Educational Resources Information Center

Jankowski, L. W.; Evans, J. K.

1981-01-01

To determine whether blind children in a well-equipped modern institution are receiving enough physical education activities to maintain good physical condition, the physiological characteristics of 20 institutionalized blind children were measured according to body composition, pulmonary function, and tolerance for exercise. (Author)

Does Your Facility Promote Educational Success?

ERIC Educational Resources Information Center

McGovern, Matthew

2000-01-01

Explains that schools must be maintained to ensure children have a good environment in which to learn and explores the following three components affecting a learning environment: site improvements; building shell; and interior spaces and systems. A building assessment form is included. (GR)

Cardiology needs good planning for the future.

PubMed

Goodroe, J H; Hicks, K J

1990-08-01

In today's health care environment, hospitals have to develop strategies to maintain their market share, especially in cardiac services. The authors share generic strategies in cost leadership, product differentiation and technological leadership that can be adapted and implemented in cardiac centers.

Maintaining Your Threads.

ERIC Educational Resources Information Center

Delack, Renee J.

1996-01-01

Describes how keeping carpets in good condition depends not only on proper maintenance but also on careful carpet selection at the outset. Offers advice for restoring a carpet's new appearance through vacuuming and hot-water extraction and suggests ways to manage spots and stains. (RJM)

The micronutrient genomics project: a community-driven knowledge base for micronutrient research

USDA-ARS?s Scientific Manuscript database

Micronutrients influence multiple metabolic pathways including oxidative and inflammatory processes. Optimum micronutrient supply is important for the maintenance of homeostasis in metabolism and, ultimately, for maintaining good health. With advances in systems biology and genomics technologies, it...

An assessment of maintainability of elevator system to improve facilities management knowledge-base

NASA Astrophysics Data System (ADS)

Siti, N. A.; Asmone, A. S.; Chew, M. Y. L.

2018-02-01

Elevator system is a highly specialized machinery that requires technicians that have a wider array of knowledge in maintaining the system to be safe and reliable. While attaining reliable data of elevator malfunction become challenges, this study has filled the gap by gathering the management-maintenance issues and operational defects of elevator system. Forty-three types of operation defects were found and the consequence defects and their possible causes of occurrences were discussed. To respond to the prime challenges of maintaining elevator system provided by the industry players’ perspective, a theoretical framework is established as a recommendation to improve knowledge base of defects in elevator system which comprises good practices, and solutions to rectify each defects found. Hence, this research paper has theoretically improved the knowledge base of maintainability of elevator system and provide meaningful guidelines in practical senses to the industry professionals.

Relationship between accuracy and complexity when learning underarm precision throwing.

PubMed

Valle, Maria Stella; Lombardo, Luciano; Cioni, Matteo; Casabona, Antonino

2018-06-12

Learning precision ball throwing was mostly studied to explore the early rapid improvement of accuracy, with poor attention on possible adaptive processes occurring later when the rate of improvement is reduced. Here, we tried to demonstrate that the strategy to select angle, speed and height at ball release can be managed during the learning periods following the performance stabilization. To this aim, we used a multivariate linear model with angle, speed and height as predictors of changes in accuracy. Participants performed underarm throws of a tennis ball to hit a target on the floor, 3.42 m away. Two training sessions (S1, S2) and one retention test were executed. Performance accuracy increased over the S1 and stabilized during the S2, with a rate of changes along the throwing axis slower than along the orthogonal axis. However, both the axes contributed to the performance changes over the learning and consolidation time. A stable relationship between the accuracy and the release parameters was observed only during S2, with a good fraction of the performance variance explained by the combination of speed and height. All the variations were maintained during the retention test. Overall, accuracy improvements and reduction in throwing complexity at the ball release followed separate timing over the course of learning and consolidation.

Performance index: An expeditious tool to screen for improved drought resistance in the Lathyrus genus.

PubMed

Silvestre, Susana; Araújo, Susana de Sousa; Vaz Patto, Maria Carlota; Marques da Silva, Jorge

2014-07-01

Some species of the Lathyrus genus are among the most promising crops for marginal lands, with high resilience to drought, flood, and fungal diseases, combined with high yields and seed nutritional value. However, lack of knowledge on the mechanisms underlying its outstanding performance and methodologies to identify elite genotypes has hampered its proper use in breeding. Chlorophyll a fast fluorescence transient (JIP test), was used to evaluate water deficit (WD) resistance in Lathyrus genus. Our results reveal unaltered photochemical values for all studied genotypes showing resistance to mild WD. Under severe WD, two Lathyrus sativus genotypes showed remarkable resilience maintaining the photochemical efficiency, contrary to other genotypes studied. Performance index (PIABS) is the best parameter to screen genotypes with improved performance and grain production under WD. Moreover, we found that JIP indices are good indicators of genotypic grain production under WD. Quantum yield of electron transport (ϕEo) and efficiency with which trapped excitons can move electrons further than QA (ψ0) revealed as important traits related to improved photosynthetic performance and should be exploited in future Lathyrus germplasm improvements. The JIP test herein described showed to be an expeditious tool to screen and to identify elite genotypes with improved drought resistance.

Increased risk environment for emergency general surgery in the context of regionalization and specialization.

PubMed

Beecher, S; O'Leary, D P; McLaughlin, R

2015-09-01

The pressures on tertiary hospitals with increased volume and complexity related to regionalization and specialization has impacted upon availability of operating theatres with consequent displacement of emergencies to high risk out of hours settings. A retrospective review of an electronic emergency theatre list prospectively maintained database was performed over a two year period. Data gathered included type of operation performed, Time to Theatre (TTT), operation start time and length of stay (LOS). Of 7041 emergency operations 25% were performed out of hours. 2949 patient had general surgical emergency procedures with 910 (30%) performed out of hours. 53% of all emergency laparotomies and 54% of appendicectomies were out of hours. 57% of cases operated on out of hours had been awaiting surgery during the day. Mean TTT was shorter for those admitted at the weekend compared to those admitted during the week (15.6 vs 24.9 h) (p < 0.0001). The majority of major emergency surgery is performed out of hours in a way unfavorable to good clinical outcomes. It is of concern that more than half of the most life threating procedures involving laparotomy, take place out of hours. Regionalization needs to be accompanied by infrastructure planning to accommodate emergency surgery. Copyright © 2015 IJS Publishing Group Limited. Published by Elsevier Ltd. All rights reserved.

CFD analysis of the STME nozzle flowfield

NASA Technical Reports Server (NTRS)

Krishnan, Anantha; Tucker, Kevin

1992-01-01

The Space Transportation Main Engine (STME) uses a gas generator cycle to cool the nozzle wall by a film-dump of the turbine exhaust. The ability to cool the skirt is a key concern in the design of the STME. CFD calculations were undertaken to predict the film cooling effectiveness and performance sensitivities for various configurations, operating points, and inlet conditions. The results presented here were obtained for the subscale nozzle. The computations were performed using REFLEQS. The computational analysis showed that a chemical equilibrium model was necessary to obtain correct predictions of the specific impulse. The frozen composition model underpredicts the ISP by about 6 percent. It was also observed that the coolant film was successful in maintaining the nozzle wall well below the stagnation temperature of the core flow. The effect of the coolant flow on the performance of the engine was found to be negligible. The computed heat fluxes at the wall were in good agreement with the empirical data obtained by Pratt and Whitney. Further test data from Pratt and Whitney are forthcoming for the subscale nozzle. Calculations will be performed to determine cooling efficiencies and nozzle performance over a range of conditions, and model predictions will be compared with experimental data. Information is given in viewgraph form.

Reward improves long-term retention of a motor memory through induction of offline memory gains.

PubMed

Abe, Mitsunari; Schambra, Heidi; Wassermann, Eric M; Luckenbaugh, Dave; Schweighofer, Nicolas; Cohen, Leonardo G

2011-04-12

In humans, training in which good performance is rewarded or bad performance punished results in transient behavioral improvements. The relative effects of reward and punishment on consolidation and long-term retention, critical behavioral stages for successful learning, are not known. Here, we investigated the effects of reward and punishment on these different stages of human motor skill learning. We studied healthy subjects who trained on a motor task under rewarded, punished, or neutral control conditions. Performance was tested before and immediately, 6 hr, 24 hr, and 30 days after training in the absence of reward or punishment. Performance improvements immediately after training were comparable in the three groups. At 6 hr, the rewarded group maintained performance gains, whereas the other two groups experienced significant forgetting. At 24 hr, the reward group showed significant offline (posttraining) improvements, whereas the other two groups did not. At 30 days, the rewarded group retained the gains identified at 24 hr, whereas the other two groups experienced significant forgetting. We conclude that training under rewarded conditions is more effective than training under punished or neutral conditions in eliciting lasting motor learning, an advantage driven by offline memory gains that persist over time. Copyright © 2011 Elsevier Ltd. All rights reserved.

Design and optimization of a portable LQCD Monte Carlo code using OpenACC

NASA Astrophysics Data System (ADS)

Bonati, Claudio; Coscetti, Simone; D'Elia, Massimo; Mesiti, Michele; Negro, Francesco; Calore, Enrico; Schifano, Sebastiano Fabio; Silvi, Giorgio; Tripiccione, Raffaele

The present panorama of HPC architectures is extremely heterogeneous, ranging from traditional multi-core CPU processors, supporting a wide class of applications but delivering moderate computing performance, to many-core Graphics Processor Units (GPUs), exploiting aggressive data-parallelism and delivering higher performances for streaming computing applications. In this scenario, code portability (and performance portability) become necessary for easy maintainability of applications; this is very relevant in scientific computing where code changes are very frequent, making it tedious and prone to error to keep different code versions aligned. In this work, we present the design and optimization of a state-of-the-art production-level LQCD Monte Carlo application, using the directive-based OpenACC programming model. OpenACC abstracts parallel programming to a descriptive level, relieving programmers from specifying how codes should be mapped onto the target architecture. We describe the implementation of a code fully written in OpenAcc, and show that we are able to target several different architectures, including state-of-the-art traditional CPUs and GPUs, with the same code. We also measure performance, evaluating the computing efficiency of our OpenACC code on several architectures, comparing with GPU-specific implementations and showing that a good level of performance-portability can be reached.

Cryogenic electrical properties of irradiated cyanate ester/epoxy insulation for fusion magnets

NASA Astrophysics Data System (ADS)

Li, X.; Wu, Z. X.; Li, J.; Xu, D.; Liu, H. M.; Huang, R. J.; Li, L. F.

2017-12-01

The insulation materials used in high field fusion magnets require excellent mechanical properties, high electrical breakdown strength, good thermal conductivity and high radiation tolerance. Previous investigations showed that cyanate ester/epoxy (CE/EP) insulation material, a candidate insulation for fusion magnets, can maintain good mechanical performance at cryogenic temperature after 10 MGy irradiation and has a much longer pot life than traditional epoxy insulation material. In order to quantify the electrical properties of the CE/EP insulation material at low temperature, a cryogenic electrical property testing system cooled by a G-M cryocooler was developed for this study. An insulation material with 40% cyanate ester and 60% epoxy was subjected to 60Co γ-ray irradiation in air at ambient temperature with a dose rate of 300 Gy/min, and total doses of 1 MGy, 5 MGy and 10 MGy. The electrical breakdown strength of this CE/EP insulation material was measured before and after irradiation. The results show that cryogenic temperature has a positive effect on the electrical breakdown strength of this composite, while the influence of 60Co γ-ray irradiation is not obvious at 6.1 K.

Impact of Having a Mentally Disabled Child in the Family on the Oral Health of the Healthy Sibling: A Comparative Study.

PubMed

Chauhan, Astha; Nagarajappa, Sandesh; Dasar, Pralhad L; Mishra, Prashant

To determine and compare oral health status, knowledge and attitude among siblings of mentally disabled with siblings of normal healthy children. 240 study subjects consisting of 120 each of siblings of mentally disabled and normal, healthy children (control group) matched for age and gender were selected by convenience sampling. Oral health was assessed using the WHO-1997 proforma. A pretested questionnaire (30 items) was used for oral health knowledge and attitude assessment. Statistical analysis was performed using the chi-squared and Mann-Whitney tests. Caries prevalence among the siblings of mentally disabled and control group was 82% (mean DMFT 1.68 ± 1.18) and 45% (mean DMFT 0.58 ± 0.72), respectively (p < 0.05). The siblings of mentally disabled children also showed good oral health knowledge (mean 7.1 ± 1.4) and a positive attitude (p < 0.05). Siblings of mentally disabled children showed higher caries experience. Knowledge and attitude towards oral health was comparatively good among siblings of mentally disabled children. They exhibited favourable attitudes and involvement in helping their sibling to maintain oral health.

Enriching lighting design.

PubMed

Brawley, Elizabeth C

2009-01-01

Good lighting is perhaps the most important and least understood element in designing healthcare environments. Both physically and mentally challenged individuals become more vulnerable and dependent on their environment to compensate for sensory impairments, including dimming eyesight, which interferes to some degree with daily activities as well as social and leisure activities - the things that provide emotional and social well-being. Too few building designs today result in lighting that meets the needs of these individuals, regardless of age. Typical lighting in most care environments is inadequate to meet lighting needs affecting both vision and the photobiological (non-visual) needs of synchronization of circadian rhythm, which impacts sleep and depression. Well-designed lighting is one of the most important design elements that will support an individual's ability to perform normal daily activities and decrease the level of disability associated with these impairments. Daylight contains the spectrum to which the circadian clock is most sensitive and provides higher light levels during the day. Easily accessible outdoor gardens encourage individuals outside, providing the necessary regular exposure to direct bright light that sunlight provides. The combination good interior lighting and regular daylight exposure contributes to regaining and maintaining an active and fulfilling lifestyle - greatly improving quality of life.

Reason behind wet pack after steam sterilization and its consequences: An overview from Central Sterile Supply Department of a cancer center in eastern India.

PubMed

Basu, Debabrata

Wet pack after steam sterilization process that means there are surely obtain millions of microorganisms that can breed and multiply rapidly and objects are unsterile and can never be used for further procedure. There are many reasons behind the wet pack occurrences after autoclaving like poor quality of wrapping materials, faulty valves of rigid container, faulty loading and packaging technique, poor steam quality, sterilizer malfunction and may be design related problems in CSSD sterile storage area. Cause of wet pack after steam sterilization processes may occur severe problems because of wasted time and effort, increased work load, increased cost, potentially contaminated instruments, infection risk to the patient, poor patient outcomes and delayed or cancellation of procedures. But such wet pack scenario can be avoided by various methods by using good steam (water) quality, performing periodic maintenance of the Autoclaves, avoidance of sterilizer overloading, allowing adequate post sterilization time to cool down the materials to room temperature, using good quality wrapping materials, properly maintain temperature and humidity of sterile storage area etc. Copyright © 2016 King Saud Bin Abdulaziz University for Health Sciences. Published by Elsevier Ltd. All rights reserved.

Like a slippery fish, a little slime is a good thing: the glycocalyx revealed.

PubMed

Biddle, Chuck

2013-12-01

The glycocalyx is a dynamic network of multiple membrane-bound complexes lining the vascular endothelium. Its role in maintaining vascular homeostasis includes regulating vascular permeability as well as a range of vital functions, such as mechanotransduction, hemostasis, modulation of inflammatory processes, and serving as an antiatherogenic. Revisionist thinking about the Starling principle is discussed in terms of the major influence of the glycocalyx on capillary and tissue fluid homeostasis. The clinical and pathophysiologic threats to the glycocalyx are reviewed as well as strategies to maintain its integrity.

Impact of Water Quality on Chlorine Demand of Corroding Copper

EPA Science Inventory

Copper is the most widely used material in drinking water premise plumbing systems. In buildings such as hospitals, large and complicated plumbing networks make it difficult to maintain good water quality. Sustaining safe disinfectant residuals throughout a building to protect ag...

Integration: For or Against?

ERIC Educational Resources Information Center

Veblen, Kari K.; Elliott, David J.

2000-01-01

Argues in support of integrating music education with other subject areas, discussing the importance of maintaining music's integrity, combining the arts, reasons for integration, and whether integration is always good. Offers an opposing argument that views the integration of music with other subject areas as unsound. (CMK)

21 CFR 226.30 - Equipment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... CURRENT GOOD MANUFACTURING PRACTICE FOR TYPE A MEDICATED ARTICLES Construction and Maintenance of Facilities and Equipment § 226.30 Equipment. Equipment used for the manufacture, processing, packaging, bulk... maintained in a clean and orderly manner and shall be of suitable design, size, construction, and location to...

21 CFR 26.69 - Monitoring of conformity assessment bodies.

Code of Federal Regulations, 2010 CFR

2010-04-01

... MUTUAL RECOGNITION OF PHARMACEUTICAL GOOD MANUFACTURING PRACTICE REPORTS, MEDICAL DEVICE QUALITY SYSTEM AUDIT REPORTS, AND CERTAIN MEDICAL DEVICE PRODUCT EVALUATION REPORTS: UNITED STATES AND THE EUROPEAN... cause to maintain, ongoing surveillance over their CAB's by means of regular audit or assessment; (b...

HOW GOOD ARE MY DATA? INFORMATION QUALITY ASSESSMENT METHODOLOGY

EPA Science Inventory

Quality assurance techniques used in software development and hardware maintenance/reliability help to ensure that data in a computerized information management system are maintained well. However, information workers may not know the quality of the data resident in their inf...

An Office Building Occupants Guide to Indoor Air Quality - Printable Version

EPA Pesticide Factsheets

This guide is intended to help people who work in office buildings learn about the factors that contribute to indoor air quality and comfort problems and the roles of building managers and occupants in maintaining a good indoor environment.

Listening to Students

ERIC Educational Resources Information Center

Phillips, Vicki

2013-01-01

Good teaching involves knowing the course content and how to teach it; building a strong, trusting relationship with students; setting and supporting high expectations; and continually monitoring students' understanding and adjusting instruction accordingly. Of course, those things must be done while maintaining classroom control and managing…

Accounting Systems for School Districts.

ERIC Educational Resources Information Center

Atwood, E. Barrett, Jr.

1983-01-01

Advises careful analysis and improvement of existing school district accounting systems prior to investment in new ones. Emphasizes the importance of attracting and maintaining quality financial staffs, developing an accounting policies and procedures manual, and designing a good core accounting system before purchasing computer hardware and…

21 CFR 110.10 - Personnel.

Code of Federal Regulations, 2010 CFR

2010-04-01

... CONSUMPTION CURRENT GOOD MANUFACTURING PRACTICE IN MANUFACTURING, PACKING, OR HOLDING HUMAN FOOD General... contamination of food. The methods for maintaining cleanliness include, but are not limited to: (1) Wearing outer garments suitable to the operation in a manner that protects against the contamination of food...

Sit Up Straight! It's Good Physics

ERIC Educational Resources Information Center

Colicchia, Giuseppe

2005-01-01

A simplified model has been developed that shows forces and torques involved in maintaining static posture in the cervical spine. The model provides a biomechanical basis to estimate loadings on the cervical discs under various postures. Thus it makes a biological context for teaching statics.

Wishing for deburdening through a sustainable control after bariatric surgery

PubMed Central

Engström, My; Forsberg, Anna

2011-01-01

The aim of this study was an in-depth investigation of the change process experienced by patients undergoing bariatric surgery. A prospective interview study was performed prior to as well as 1 and 2 years after surgery. Data analyses of the transcribed interviews were performed by means of the Grounded Theory method. A core category was identified: Wishing for deburdening through a sustainable control over eating and weight, comprising three related categories: hoping for deburdening and control through surgery, feeling deburdened and practising control through physical restriction, and feeling deburdened and trying to maintain control by own willpower. Before surgery, the participants experienced little or no control in relation to food and eating and hoped that the bariatric procedure would be the first brick in the building of a foundation that would lead to control in this area. The control thus achieved in turn affected the participants' relationship to themselves, their roles in society, and the family as well as to health care. One year after surgery they reported established routines regarding eating as well as higher self-esteem due to weight loss. In family and society they set limits and in relation to health care staff they felt their concern and reported satisfaction with the surgery. After 2 years, fear of weight gain resurfaced and their self-image was modified to be more realistic. They were no longer totally self-confident about their condition, but realised that maintaining control was a matter of struggle to obtaining a foundation of sustainable control. Between 1 and 2 years after surgery, the physical control mechanism over eating habits started to more or less fade for all participants. An implication is that when this occurs, health care professionals need to provide interventions that help to maintain the weight loss in order to achieve a good long-term outcome. PMID:21339891

Wishing for deburdening through a sustainable control after bariatric surgery.

PubMed

Engström, My; Forsberg, Anna

2011-02-15

The aim of this study was an in-depth investigation of the change process experienced by patients undergoing bariatric surgery. A prospective interview study was performed prior to as well as 1 and 2 years after surgery. Data analyses of the transcribed interviews were performed by means of the Grounded Theory method. A core category was identified: Wishing for deburdening through a sustainable control over eating and weight, comprising three related categories: hoping for deburdening and control through surgery, feeling deburdened and practising control through physical restriction, and feeling deburdened and trying to maintain control by own willpower. Before surgery, the participants experienced little or no control in relation to food and eating and hoped that the bariatric procedure would be the first brick in the building of a foundation that would lead to control in this area. The control thus achieved in turn affected the participants' relationship to themselves, their roles in society, and the family as well as to health care. One year after surgery they reported established routines regarding eating as well as higher self-esteem due to weight loss. In family and society they set limits and in relation to health care staff they felt their concern and reported satisfaction with the surgery. After 2 years, fear of weight gain resurfaced and their self-image was modified to be more realistic. They were no longer totally self-confident about their condition, but realised that maintaining control was a matter of struggle to obtaining a foundation of sustainable control. Between 1 and 2 years after surgery, the physical control mechanism over eating habits started to more or less fade for all participants. An implication is that when this occurs, health care professionals need to provide interventions that help to maintain the weight loss in order to achieve a good long-term outcome.

Extending hepatocyte functionality for drug-testing applications using high-viscosity alginate-encapsulated three-dimensional cultures in bioreactors.

PubMed

Miranda, Joana P; Rodrigues, Armanda; Tostões, Rui M; Leite, Sofia; Zimmerman, Heiko; Carrondo, Manuel J T; Alves, Paula M

2010-12-01

The maintenance of differentiated hepatocyte phenotype in vitro depends on several factors-in particular, on extracellular matrix interactions, for example, with three-dimensional (3D) matrices. Alginate hydrogel provides the cells with a good extracellular matrix due to the formation of a massive capsule with semi-permeable properties that allows for diffusion of the medium components into the cells as well as efficient waste product elimination. Simultaneously, alginate protects the cells from shear stress caused by the hydrodynamics when cultured in stirred systems such as bioreactors. We have previously developed a hepatocyte aggregate 3D culture system in a bioreactor where improved hepatocyte functionality could be maintained over longer periods (21 days). In this work, ultra-high-viscosity alginate was used for hepatocyte aggregates entrapment. Hepatocyte biotransformation (phase I and II enzymes), CYP450 inducibility, and secretory capacity (albumin and urea production) were monitored. The analyses were performed in both spinner vessels and bioreactors to test the effect of the pO(2) control, unavailable in the spinners. Performance of alginate-encapsulated hepatocyte aggregates in culture was compared with nonencapsulated aggregate cultures in both bioreactor (controlled environment) and spinner vessels. For both culture systems, hepatocytes' metabolic and biotransformation capacities were maintained for up to 1 month, and encapsulated cells in bioreactors showed the best performance. In particular, albumin production rate increased 2- and 1.5-fold in encapsulated aggregates compared with nonencapsulated aggregates in bioreactor and spinner vessels, respectively. Urea production rate increased twofold in encapsulated cultures compared with nonencapsulated cells, in both bioreactor and spinner vessels. Similarly, in both the bioreactor and the spinner system, cell encapsulation resulted in a 1.5- and 2.8-fold improvement of hepatocyte 7-ethoxycoumarin and uridine diphosphate glucuronosyltransferases (UGT) activities, respectively. For all parameters, but for UGT activity, the bioreactor system resulted better than the spinner vessels; for UGT activity no difference was observed between the two. Furthermore, both encapsulated and nonencapsulated 3D culture systems were inducible by 3-methylcholanthrene and dexamethasone. The encapsulated systems consistently showed improved performance over the nonencapsulated cells, indicating that the protection conferred by the alginate matrix plays a relevant role in maintaining the hepatocyte functionalities in vitro.

Gap analysis: assessing the value perception of consultant pharmacist services and the performance of consultant pharmacists.

PubMed

Clark, Thomas R

2008-09-01

To understand the importance of services provided by consultant pharmacists and to assess perception of their performance of services. Cross-sectional; nursing facility team. Random e-mail survey of consultant pharmacists; phone survey of team members. 233 consultant pharmacists (practicing in a nursing facility); 540 team members (practicing in a nursing facility, interacting with > or = 1 consultant pharmacist): 120 medical directors, 210 directors of nursing, 210 administrators. Consultant pharmacists, directors of nursing, medical directors, and administrators rating importance/performance of 21 services. Gap between teams' ratings of importance and consultant pharmacists' performance is assessed to categorize services. Importance/performance ranked on five-point scale. Mean scores used for gap analysis to cluster services into four categories. Per combined group, six services categorized as "Keep It Up" (important, good performance), consensus with individual groups, except discrepancy with medical directors, for one service. Six services each categorized as "Improve" (important, large gap) and "Improve Second" (lower importance, large gap), with varied responses by individual groups. Three different services were categorized into "Don't Worry," with consensus within individual groups. Consensus from all groups found 5 of 21 services are important and performed well by consultant pharmacists, indicating to maintain performance of services. For three services, consultant pharmacists do not need to worry about their performance. Thirteen services require improvement in consultant pharmacists' performance; various groups differ on extent of improvement needed. Results can serve as benchmark comparisons with results obtained by consultant pharmacists in their own facilities.

Calculating inspector probability of detection using performance demonstration program pass rates

NASA Astrophysics Data System (ADS)

Cumblidge, Stephen; D'Agostino, Amy

2016-02-01

The United States Nuclear Regulatory Commission (NRC) staff has been working since the 1970's to ensure that nondestructive testing performed on nuclear power plants in the United States will provide reasonable assurance of structural integrity of the nuclear power plant components. One tool used by the NRC has been the development and implementation of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code Section XI Appendix VIII[1] (Appendix VIII) blind testing requirements for ultrasonic procedures, equipment, and personnel. Some concerns have been raised, over the years, by the relatively low pass rates for the Appendix VIII qualification testing. The NRC staff has applied statistical tools and simulations to determine the expected probability of detection (POD) for ultrasonic examinations under ideal conditions based on the pass rates for the Appendix VIII qualification tests for the ultrasonic testing personnel. This work was primarily performed to answer three questions. First, given a test design and pass rate, what is the expected overall POD for inspectors? Second, can we calculate the probability of detection for flaws of different sizes using this information? Finally, if a previously qualified inspector fails a requalification test, does this call their earlier inspections into question? The calculations have shown that one can expect good performance from inspectors who have passed appendix VIII testing in a laboratory-like environment, and the requalification pass rates show that the inspectors have maintained their skills between tests. While these calculations showed that the PODs for the ultrasonic inspections are very good under laboratory conditions, the field inspections are conducted in a very different environment. The NRC staff has initiated a project to systematically analyze the human factors differences between qualification testing and field examinations. This work will be used to evaluate and prioritize potential human factors issues that may degrade performance in the field.

Effectiveness enhancement of a cycloidal wind turbine by individual active control of blade motion

NASA Astrophysics Data System (ADS)

Hwang, In Seong; Lee, Yun Han; Kim, Seung Jo

2007-04-01

In this paper, a research for the effectiveness enhancement of a Cycloidal Wind Turbine by individual active control of blade motion is described. To improve the performance of the power generation system, which consists of several straight blades rotating about axis in parallel direction, the cycloidal blade system and the individual active blade control method are adopted. It has advantages comparing with horizontal axis wind turbine or conventional vertical axis wind turbine because it maintains optimal blade pitch angles according to wind speed, wind direction and rotor rotating speed to produce high electric power at any conditions. It can do self-starting and shows good efficiency at low wind speed and complex wind condition. Optimal blade pitch angle paths are obtained through CFD analysis according to rotor rotating speed and wind speed. The individual rotor blade control system consists of sensors, actuators and microcontroller. To realize the actuating device, servo motors are installed to each rotor blade. Actuating speed and actuating force are calculated to compare with the capacities of servo motor, and some delays of blade pitch angles are corrected experimentally. Performance experiment is carried out by the wind blowing equipment and Labview system, and the rotor rotates from 50 to 100 rpm according to the electric load. From this research, it is concluded that developing new vertical axis wind turbine, Cycloidal Wind Turbine which is adopting individual active blade pitch control method can be a good model for small wind turbine in urban environment.

Simulation of disturbance rejection control of half-car active suspension system using active disturbance rejection control with decoupling transformation

NASA Astrophysics Data System (ADS)

Hasbullah, Faried; Faris, Waleed F.

2017-12-01

In recent years, Active Disturbance Rejection Control (ADRC) has become a popular control alternative due to its easy applicability and robustness to varying processes. In this article, ADRC with input decoupling transformation (ADRC-IDT) is proposed to improve ride comfort of a vehicle with an active suspension system using half-car model. The ride performance of the ADRC-IDT is evaluated and compared with decentralized ADRC control as well as the passive system. Simulation results show that both ADRC and ADRC-IDT manage to appreciably reduce body accelerations and able to cope well with varying conditions typically encountered in an active suspension system. Also, it is sufficient to control only the body motions with both active controllers to improve ride comfort while maintaining good road holding and small suspension working space.

What approach to brain partial volume correction is best for PET/MRI?

NASA Astrophysics Data System (ADS)

Hutton, B. F.; Thomas, B. A.; Erlandsson, K.; Bousse, A.; Reilhac-Laborde, A.; Kazantsev, D.; Pedemonte, S.; Vunckx, K.; Arridge, S. R.; Ourselin, S.

2013-02-01

Many partial volume correction approaches make use of anatomical information, readily available in PET/MRI systems but it is not clear what approach is best. Seven novel approaches to partial volume correction were evaluated, including several post-reconstruction methods and several reconstruction methods that incorporate anatomical information. These were compared with an MRI-independent approach (reblurred van Cittert ) and uncorrected data. Monte Carlo PET data were generated for activity distributions representing both 18F FDG and amyloid tracer uptake. Post-reconstruction methods provided the best recovery with ideal segmentation but were particularly sensitive to mis-registration. Alternative approaches performed better in maintaining lesion contrast (unseen in MRI) with good noise control. These were also relatively insensitive to mis-registration errors. The choice of method will depend on the specific application and reliability of segmentation and registration algorithms.

Environmentally friendly and breathable wet-laid hydroentangled nonwovens for personal hygiene care with excellent water absorbency and flushability

NASA Astrophysics Data System (ADS)

Deng, Chao; Liu, Wanjun; Zhang, Yinjiang; Huang, Chen; Zhao, Yi; Jin, Xiangyu

2018-04-01

Developing wet-laid papers with a good wet strength remains a longstanding challenge in the papermaking industry. In this study, hydroentanglement, a mechanical bonding technique is developed to consolidate the wet-laid fibre web. The results indicate that wet tensile strength, ductile stretching property, softness, air permeability and water absorbency of the wet-laid fibre web are significantly improved by hydroentanglement. In addition, the abrasion test shows that the dusting off rate of wet-laid fibre web can be effectively reduced through hydroentanglement. Moreover, the disintegration experiment proves that wet-laid hydroentangled nonwovens could be easily dispersed when compared with conventional carded hydroentangled nonwovens. Therefore, the new wet-laid hydroentangled nonwovens can maintain excellent performance in a wet state, showing a great potential for personal hygiene applications.

Golf Ball

NASA Technical Reports Server (NTRS)

1998-01-01

The Ultra 500 Series golf balls, introduced in 1995 by Wilson Sporting Goods Company, has 500 dimples arranged in a pattern of 60 spherical triangles. The design employs NASA's aerodynamics technology analysis of air loads of the tank and Shuttle orbiter that was performed under the Space Shuttle External Tank program. According to Wilson, this technology provides 'the most symmetrical ball surface available, sustaining initial velocity longer and producing the most stable ball flight for unmatched accuracy and distance.' The dimples are in three sizes, shapes and depths mathematically positioned for the best effect. The selection of dimples and their placement optimizes the interaction of opposing forces of lift and drag. Large dimples reduce air drag, enhance lift, and maintain spin for distance. Small dimples prevent excessive lift that destabilizes the ball flight and the medium size dimples blend the other two.

Preparation of Ag superhydrophobic surface on metal substrates

NASA Astrophysics Data System (ADS)

Li, J. Y.; Lu, S. X.; Xu, W. G.; Duan, Y. Q.; Yang, X. C.; Cheng, Y. Y.; He, G.; Cui, S.

2018-01-01

In this work, the facile approaches are developed for preparation the Ag superhydrophobic surfaces (SHSs) on zinc (Zn), copper (Cu) and aluminium (Al) substrates. The water contact angles (WCAs) of the Ag SHSs on Zn, Cu and Al substrates are 167°, 165° and 154°, respectively. Furthermore, the water sliding angle (WSA) of each surface is less than 1°. The morphology and chemical composition of the samples are characterized using scanning electron microscopy (SEM) and X-ray diffraction pattern (XRD). The as-prepared three kinds of SHSs possess the self-cleaning performance, which can quickly take the chalk away when the water droplets fall down the SHSs. In addition, the superhydrophobicity of the SHSs can well maintain after exposure to the air for 6 months, indicating that the surfaces can sustain good stability.

NASA Intellectual Property Negotiation Practices and their Relationship to Quantitative Measures of Technology Transfer

NASA Technical Reports Server (NTRS)

Bush, Lance B.

1997-01-01

In the current political climate NASA must be able to show reliable measures demonstrating successful technology transfer. The currently available quantitative data of intellectual property technology transfer efforts portray a less than successful performance. In this paper, the use of only quantitative values for measurement of technology transfer is shown to undervalue the effort. In addition, NASA's current policy in negotiating intellectual property rights results in undervalued royalty rates. NASA has maintained that it's position of providing public good precludes it from negotiating fair market value for its technology and instead has negotiated for reasonable cost in order to recover processing fees. This measurement issue is examined and recommendations made which include a new policy regarding the intellectual property rights negotiation, and two measures to supplement the intellectual property measures.

Benefit from NASA

NASA Image and Video Library

1998-01-01

The Ultra 500 Series golf balls, introduced in 1995 by Wilson Sporting Goods Company, has 500 dimples arranged in a pattern of 60 spherical triangles. The design employs NASA's aerodynamics technology analysis of air loads of the tank and Shuttle orbiter that was performed under the Space Shuttle External Tank program. According to Wilson, this technology provides "the most symmetrical ball surface available, sustaining initial velocity longer and producing the most stable ball flight for unmatched accuracy and distance." The dimples are in three sizes, shapes and depths mathematically positioned for the best effect. The selection of dimples and their placement optimizes the interaction of opposing forces of lift and drag. Large dimples reduce air drag, enhance lift, and maintain spin for distance. Small dimples prevent excessive lift that destabilizes the ball flight and the medium size dimples blend the other two.

Low Temperature Characterization of Ceramic and Film Power Capacitors

NASA Technical Reports Server (NTRS)

Hammoud, Ahmad; Overton, Eric

1996-01-01

Among the key requirements for advanced electronic systems is the ability to withstand harsh environments while maintaining reliable and efficient operation. Exposures to low temperature as well as high temperature constitute such stresses. Applications where low temperatures are encountered include deep space missions, medical imaging equipment, and cryogenic instrumentation. Efforts were taken to design and develop power capacitors capable of wide temperature operation. In this work, ceramic and film power capacitors were developed and characterized as a function of temperature from 20 C to -185 C in terms of their dielectric properties. These properties included capacitance stability and dielectric loss in the frequency range of 50 Hz to 100 kHz. DC leakage current measurements were also performed on the capacitors. The manuscript presents the results that indicate good operational characteristic behavior and stability of the components tested at low temperatures.

Parallel discontinuous Galerkin FEM for computing hyperbolic conservation law on unstructured grids

NASA Astrophysics Data System (ADS)

Ma, Xinrong; Duan, Zhijian

2018-04-01

High-order resolution Discontinuous Galerkin finite element methods (DGFEM) has been known as a good method for solving Euler equations and Navier-Stokes equations on unstructured grid, but it costs too much computational resources. An efficient parallel algorithm was presented for solving the compressible Euler equations. Moreover, the multigrid strategy based on three-stage three-order TVD Runge-Kutta scheme was used in order to improve the computational efficiency of DGFEM and accelerate the convergence of the solution of unsteady compressible Euler equations. In order to make each processor maintain load balancing, the domain decomposition method was employed. Numerical experiment performed for the inviscid transonic flow fluid problems around NACA0012 airfoil and M6 wing. The results indicated that our parallel algorithm can improve acceleration and efficiency significantly, which is suitable for calculating the complex flow fluid.

1060-nm VCSEL-based parallel-optical modules for optical interconnects

NASA Astrophysics Data System (ADS)

Nishimura, N.; Nagashima, K.; Kise, T.; Rizky, A. F.; Uemura, T.; Nekado, Y.; Ishikawa, Y.; Nasu, H.

2015-03-01

The capability of mounting a parallel-optical module onto a PCB through solder-reflow process contributes to reduce the number of piece parts, simplify its assembly process, and minimize a foot print for both AOC and on-board applications. We introduce solder-reflow-capable parallel-optical modules employing 1060-nm InGaAs/GaAs VCSEL which leads to the advantages of realizing wider modulation bandwidth, longer transmission distance, and higher reliability. We demonstrate 4-channel parallel optical link performance operated at a bit stream of 28 Gb/s 231-1 PRBS for each channel and transmitted through a 50-μm-core MMF beyond 500 m. We also introduce a new mounting technology of paralleloptical module to realize maintaining good coupling and robust electrical connection during solder-reflow process between an optical module and a polymer-waveguide-embedded PCB.

Determination of capsaicinoids in topical cream by liquid-liquid extraction and liquid chromatography.

PubMed

Kaale, Eliangiringa; Van Schepdael, Ann; Roets, Eugène; Hoogmartens, Jos

2002-11-07

A reversed-phase liquid chromatography (LC) method has been developed, optimised and validated for the separation and quantitation of capsaicin (CP) and dihydrocapsaicin (DHCP) in a topical cream formulation. Sample preparation involves liquid-liquid extraction prior to LC analysis. The method uses a Hypersil C(18) BDS, 5 micrometer, 250x4.6 mm I.D. column maintained at 35 degrees C. The mobile phase comprises methanol, water, acetonitrile (ACN) and acetic acid (47:42:10:1, v/v/v/v) at a flow rate of 1.0 ml/min. Robustness was evaluated by performing a central composite face-centred design (CCF) experiment. The method shows good selectivity, linearity, sensitivity and repeatability. The conditions allow the separation and quantitation of CP and DHCP without interference from the other substances contained in the cream.

Environmentally friendly and breathable wet-laid hydroentangled nonwovens for personal hygiene care with excellent water absorbency and flushability.

PubMed

Deng, Chao; Liu, Wanjun; Zhang, Yinjiang; Huang, Chen; Zhao, Yi; Jin, Xiangyu

2018-04-01

Developing wet-laid papers with a good wet strength remains a longstanding challenge in the papermaking industry. In this study, hydroentanglement, a mechanical bonding technique is developed to consolidate the wet-laid fibre web. The results indicate that wet tensile strength, ductile stretching property, softness, air permeability and water absorbency of the wet-laid fibre web are significantly improved by hydroentanglement. In addition, the abrasion test shows that the dusting off rate of wet-laid fibre web can be effectively reduced through hydroentanglement. Moreover, the disintegration experiment proves that wet-laid hydroentangled nonwovens could be easily dispersed when compared with conventional carded hydroentangled nonwovens. Therefore, the new wet-laid hydroentangled nonwovens can maintain excellent performance in a wet state, showing a great potential for personal hygiene applications.

Full-duplex radio over fiber link with colorless source-free base station based on single sideband optical mm-wave signal with polarization rotated optical carrier

NASA Astrophysics Data System (ADS)

Ma, Jianxin

2016-07-01

A full-duplex radio-over fiber (RoF) link scheme based on single sideband (SSB) optical millimeter (mm)-wave signal with polarization-rotated optical carrier is proposed to realize the source-free colorless base station (BS), in which a polarization beam splitter (PBS) is used to abstract part of the optical carrier for conveying the uplink data. Since the optical carrier for the uplink does not bear the downlink signal, no cross-talk from the downlink contaminates the uplink signal. The simulation results demonstrate that both down- and up-links maintain good performance. The mm-wave signal distribution network based on the proposed full duplex fiber link scheme can use the uniform source-free colorless BSs, which makes the access system very simpler.

21 CFR 26.15 - Monitoring continued equivalence.

Code of Federal Regulations, 2014 CFR

2014-04-01

... COMMUNITY Specific Sector Provisions for Pharmaceutical Good Manufacturing Practices § 26.15 Monitoring continued equivalence. Monitoring activities for the purpose of maintaining equivalence shall include review... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Monitoring continued equivalence. 26.15 Section 26...

21 CFR 26.15 - Monitoring continued equivalence.

Code of Federal Regulations, 2013 CFR

2013-04-01

... COMMUNITY Specific Sector Provisions for Pharmaceutical Good Manufacturing Practices § 26.15 Monitoring continued equivalence. Monitoring activities for the purpose of maintaining equivalence shall include review... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Monitoring continued equivalence. 26.15 Section 26...

21 CFR 26.15 - Monitoring continued equivalence.

Code of Federal Regulations, 2012 CFR

2012-04-01

... COMMUNITY Specific Sector Provisions for Pharmaceutical Good Manufacturing Practices § 26.15 Monitoring continued equivalence. Monitoring activities for the purpose of maintaining equivalence shall include review... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Monitoring continued equivalence. 26.15 Section 26...

9 CFR 3.28 - Primary enclosures.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Pigs and Hamsters Facilities and Operating Standards § 3.28 Primary enclosures. All primary enclosures for guinea pigs and hamsters shall conform to the following requirements: (a) General. (1) Primary enclosures shall be structurally sound and maintained in good repair to protect the guinea pigs and hamsters...

21 CFR 225.202 - Formula, production, and distribution records.

Code of Federal Regulations, 2014 CFR

2014-04-01

... SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR MEDICATED FEEDS Records § 225.202 Formula, production, and distribution records. Records shall be maintained identifying the... 21 Food and Drugs 4 2014-04-01 2014-04-01 false Formula, production, and distribution records. 225...

21 CFR 225.202 - Formula, production, and distribution records.

Code of Federal Regulations, 2012 CFR

2012-04-01

... SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR MEDICATED FEEDS Records § 225.202 Formula, production, and distribution records. Records shall be maintained identifying the... 21 Food and Drugs 4 2012-04-01 2012-04-01 false Formula, production, and distribution records. 225...

21 CFR 225.202 - Formula, production, and distribution records.

Code of Federal Regulations, 2013 CFR

2013-04-01

... SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR MEDICATED FEEDS Records § 225.202 Formula, production, and distribution records. Records shall be maintained identifying the... 21 Food and Drugs 4 2013-04-01 2013-04-01 false Formula, production, and distribution records. 225...

21 CFR 225.202 - Formula, production, and distribution records.

Code of Federal Regulations, 2011 CFR

2011-04-01

... SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR MEDICATED FEEDS Records § 225.202 Formula, production, and distribution records. Records shall be maintained identifying the... 21 Food and Drugs 4 2011-04-01 2011-04-01 false Formula, production, and distribution records. 225...

30 CFR 56.6202 - Vehicles.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Vehicles. 56.6202 Section 56.6202 Mineral... Vehicles. (a) Vehicles containing explosive material shall be— (1) Maintained in good condition and shall... device being used in the loading operation. (b) Vehicles containing explosives shall have— (1) No...

30 CFR 56.6202 - Vehicles.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Vehicles. 56.6202 Section 56.6202 Mineral... Vehicles. (a) Vehicles containing explosive material shall be— (1) Maintained in good condition and shall... device being used in the loading operation. (b) Vehicles containing explosives shall have— (1) No...

30 CFR 56.6202 - Vehicles.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Vehicles. 56.6202 Section 56.6202 Mineral... Vehicles. (a) Vehicles containing explosive material shall be— (1) Maintained in good condition and shall... device being used in the loading operation. (b) Vehicles containing explosives shall have— (1) No...

30 CFR 56.6202 - Vehicles.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Vehicles. 56.6202 Section 56.6202 Mineral... Vehicles. (a) Vehicles containing explosive material shall be— (1) Maintained in good condition and shall... device being used in the loading operation. (b) Vehicles containing explosives shall have— (1) No...

30 CFR 56.6202 - Vehicles.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Vehicles. 56.6202 Section 56.6202 Mineral... Vehicles. (a) Vehicles containing explosive material shall be— (1) Maintained in good condition and shall... device being used in the loading operation. (b) Vehicles containing explosives shall have— (1) No...

Intentional Mathematics Teaching in Early Childhood Classrooms

ERIC Educational Resources Information Center

Jung, Myoungwhon; Conderman, Gregory

2013-01-01

Studies and discussions around "good teaching practices" have often identified intentionality as the chief characteristic of outstanding teachers. Intentional teachers are identified as maintaining the habit of informed reflection as they plan, teach, reflect on, and revise the effectiveness of their practices. Intentional teaching strategies are…

29 CFR 1910.183 - Helicopters.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 5 2014-07-01 2014-07-01 false Helicopters. 1910.183 Section 1910.183 Labor Regulations... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Materials Handling and Storage § 1910.183 Helicopters. (a) [Reserved...) Housekeeping. Good housekeeping shall be maintained in all helicopter loading and unloading areas. (h) Load...

29 CFR 1910.183 - Helicopters.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 5 2013-07-01 2013-07-01 false Helicopters. 1910.183 Section 1910.183 Labor Regulations... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Materials Handling and Storage § 1910.183 Helicopters. (a) [Reserved...) Housekeeping. Good housekeeping shall be maintained in all helicopter loading and unloading areas. (h) Load...

29 CFR 1910.183 - Helicopters.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 5 2012-07-01 2012-07-01 false Helicopters. 1910.183 Section 1910.183 Labor Regulations... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Materials Handling and Storage § 1910.183 Helicopters. (a) [Reserved...) Housekeeping. Good housekeeping shall be maintained in all helicopter loading and unloading areas. (h) Load...

Heating, Ventilation and Air-Conditioning Systems, Part of Indoor Air Quality Design Tools for Schools

EPA Pesticide Factsheets

The main purposes of a Heating, Ventilation, and Air-Conditioning system are to help maintain good indoor air quality through adequate ventilation with filtration and provide thermal comfort. HVAC systems are among the largest energy consumers in schools.

Postmodern Chapel Services for Generation X and Millennial Generation Soldiers

DTIC Science & Technology

2008-06-13

expressed in Beyond Good and Evil. The first essay continues the discussion of master morality versus servant morality, and maintains that the...revenge, resentment, hatred, impotence, and cowardice. The third essay also contains one of Nietzsche’s clearest expressions of “perspectivism

Insurance and Risk Management at the National Outdoor Leadership School.

ERIC Educational Resources Information Center

Chu, Lantien

1990-01-01

Describes how an outdoor program specializing in wilderness expeditions approaches risk management, liability, and insurance. Discusses maintaining good communications with insurance agents, managing crisis situations, participating in program audits, reading the fine print, international insurance coverage, and the basis for insurance premiums.…

Sleep Tips for Sjogren's Patients

MedlinePlus

... important for those with Sjögren’s syndrome, saying that sleep deprivation exacerbates daytime fatigue and can affect the immune system. Make sure the bedroom is comfortable, secure, dark, and quiet. Try to maintain good “sleep hygiene:” Get out of bed at the same ...

9 CFR 3.28 - Primary enclosures.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Pigs and Hamsters Facilities and Operating Standards § 3.28 Primary enclosures. All primary enclosures for guinea pigs and hamsters shall conform to the following requirements: (a) General. (1) Primary enclosures shall be structurally sound and maintained in good repair to protect the guinea pigs and hamsters...

The enabling effect of food assistance in improving adherence and/or treatment completion for antiretroviral therapy and tuberculosis treatment: a literature review.

PubMed

de Pee, Saskia; Grede, Nils; Mehra, Divya; Bloem, Martin W

2014-10-01

Socioeconomic costs of HIV and TB and the difficulty of maintaining optimal treatment are well documented. Social protection measures such as food assistance may be required to offset some of the treatment related costs as well as to ensure food security and maintain good health of the affected individual and household. Programmes have started placing greater emphasis on treatment adherence and are looking for proven interventions that can optimize it. This paper looks at the effect of food assistance for enabling treatment adherence and reviews studies that used food assistance to promote adherence. Eight of ten studies found that provision of food can improve adherence and/or treatment completion for HIV care and treatment, ART and TB-DOTS. This indicates that food provision is not only a biological, but also a behavioural intervention, and underscores that unresolved food insecurity can be an impediment to treatment adherence and consequently to good treatment outcomes.

76 FR 44591 - Notice of Hearing: Reconsideration of Disapproval of Indiana State Plan Amendments (SPA) 11-011

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-26

... perform abortions or maintain or operate facilities where abortions are performed, except for hospitals or... restrictions on Federal funding of abortion services. Section 1116 of the Act and Federal regulations at 42 CFR... providers that perform abortions or maintain or operate facilities where abortions are performed, except for...

Contralateral Delay Activity Tracks Fluctuations in Working Memory Performance.

PubMed

Adam, Kirsten C S; Robison, Matthew K; Vogel, Edward K

2018-01-08

Neural measures of working memory storage, such as the contralateral delay activity (CDA), are powerful tools in working memory research. CDA amplitude is sensitive to working memory load, reaches an asymptote at known behavioral limits, and predicts individual differences in capacity. An open question, however, is whether neural measures of load also track trial-by-trial fluctuations in performance. Here, we used a whole-report working memory task to test the relationship between CDA amplitude and working memory performance. If working memory failures are due to decision-based errors and retrieval failures, CDA amplitude would not differentiate good and poor performance trials when load is held constant. If failures arise during storage, then CDA amplitude should track both working memory load and trial-by-trial performance. As expected, CDA amplitude tracked load (Experiment 1), reaching an asymptote at three items. In Experiment 2, we tracked fluctuations in trial-by-trial performance. CDA amplitude was larger (more negative) for high-performance trials compared with low-performance trials, suggesting that fluctuations in performance were related to the successful storage of items. During working memory failures, participants oriented their attention to the correct side of the screen (lateralized P1) and maintained covert attention to the correct side during the delay period (lateralized alpha power suppression). Despite the preservation of attentional orienting, we found impairments consistent with an executive attention theory of individual differences in working memory capacity; fluctuations in executive control (indexed by pretrial frontal theta power) may be to blame for storage failures.

The Experience of Young Women Living in a Prostitution Area in Maintaining Their Reproductive Health.

PubMed

Dovis, Vonyca; Setyowati; Kurniawati, Wiwit

Young women face a difficult situation when they live in a prostitution area or red light district. A phenomenological approach was applied to explore the experiences in maintaining reproductive health of 10 young women living in the prostitution area in Lampung, one of the provinces in Sumatra. Thematic content analysis found 7 themes including: (1) The participants' perception of prostitution as a place of naughty women and free sexual activity that can transmit STDs and influence adolescent psychology; (2) The ways the participants kept their reproductive organs healthy were through maintaining friendships, maintaining personal hygiene, avoiding free sexual activity, eating healthy food, and having routine medical checkups; (3) Information support was gained from family, health workers, media, and teachers; (4) Emotional support from family and friends; (5) Barriers to maintaining good health were inaccessible health facilities and an underfunded health service; (6) The needs of the participants were reproductive health services and clean environment; (7) The participants hoped for health education and intensive health services with friendly nurses. The results of this research illustrate that there is a need for socializing intensive ways to maintain reproductive health, especially in a risky environment.

Novel biomarker-based model for the prediction of sorafenib response and overall survival in advanced hepatocellular carcinoma: a prospective cohort study.

PubMed

Kim, Hwi Young; Lee, Dong Hyeon; Lee, Jeong-Hoon; Cho, Young Youn; Cho, Eun Ju; Yu, Su Jong; Kim, Yoon Jun; Yoon, Jung-Hwan

2018-03-20

Prediction of the outcome of sorafenib therapy using biomarkers is an unmet clinical need in patients with advanced hepatocellular carcinoma (HCC). The aim was to develop and validate a biomarker-based model for predicting sorafenib response and overall survival (OS). This prospective cohort study included 124 consecutive HCC patients (44 with disease control, 80 with progression) with Child-Pugh class A liver function, who received sorafenib. Potential serum biomarkers (namely, hepatocyte growth factor [HGF], fibroblast growth factor [FGF], vascular endothelial growth factor receptor-1, CD117, and angiopoietin-2) were tested. After identifying independent predictors of tumor response, a risk scoring system for predicting OS was developed and 3-fold internal validation was conducted. A risk scoring system was developed with six covariates: etiology, platelet count, Barcelona Clinic Liver Cancer stage, protein induced by vitamin K absence-II, HGF, and FGF. When patients were stratified into low-risk (score ≤ 5), intermediate-risk (score 6), and high-risk (score ≥ 7) groups, the model provided good discriminant functions on tumor response (concordance [c]-index, 0.884) and 12-month survival (area under the curve [AUC], 0.825). The median OS was 19.0, 11.2, and 6.1 months in the low-, intermediate-, and high-risk group, respectively (P < 0.001). In internal validation, the model maintained good discriminant functions on tumor response (c-index, 0.825) and 12-month survival (AUC, 0.803), and good calibration functions (all P > 0.05 between expected and observed values). This new model including serum FGF and HGF showed good performance in predicting the response to sorafenib and survival in patients with advanced HCC.

Synthesis and properties of novel sulfonated polybenzimidazoles from disodium 4,6-bis(4-carboxyphenoxy)benzene-1,3-disulfonate

NASA Astrophysics Data System (ADS)

Sheng, Li; Xu, Hongjie; Guo, Xiaoxia; Fang, Jianhua; Fang, Liang; Yin, Jie

2011-03-01

A series of sulfonated polybenzimidazoles (SPBIs) with varied ion exchange capacities (IECs) have been synthesized by random condensation copolymerization of a new sulfonated dicarboxylic acid monomer 4,6-bis(4-carboxyphenoxy)benzene-1,3-disulfonate (BCPOBDS-Na), 4,4‧-dicarboxydiphenyl ether (DCDPE) and 3,3‧-diaminobenzidine (DAB) in Eaton's reagent at 140 °C. Most of the SPBIs show good solubility in polar aprotic organic solvents such as dimethylsulfoxide (DMSO) and N,N-dimethylacetamide (DMAc). Thermogravimetric analysis (TGA) reveals that the SPBIs have excellent thermal stability (desulfonation temperatures (on-set) > 370 °C). The SPBI membranes show good mechanical properties of which tensile strength, elongation at break, and storage modulus are in the range of 89-96 MPa, 12-42%, and 2.4-3.1 GPa, respectively. Moreover, the SPBI membranes exhibit phosphoric acid (PA) uptake in the range of 180-240% (w/w) in 85 wt% PA at 50 °C, while high mechanical properties (13-20 MPa) are maintained. The SPBI membrane with 240% (w/w) PA uptake displays fairly high proton conductivity (37.3 mS cm-1) at 0% relative humidity at 170 °C. The fuel cell fabricated with the PA-doped SPBI membrane (PA uptake = 240% (w/w)) displays good performance with the highest output power density of 0.58 W cm-2 at 170 °C with hydrogen-oxygen gases under ambient pressure without external humidification.

[Adaptation of the Hinting Task theory of the mind test to Spanish].

PubMed

Gil, David; Fernández-Modamio, Mar; Bengochea, Rosario; Arrieta, Marta

2012-01-01

Many studies have found that patients with schizophrenia have a deficit in theory of mind. Some authors associate this deficit with the presence of symptoms, while others maintain that it can also be observed in patients in the remission phase. There is no reference test to assess theory of mind in schizophrenia, although one of the most used is the Hinting Task. The aim of the present study consists of adapting and validating, in Spanish, the 10 histories that make up this test. The study was conducted on a sample of 39 control subjects and 40 patients with schizophrenia. The internal consistency and the between-observer reliability and test-retest were assessed in both sample groups. The performance of the patients and control subjects were also compared. Good reliability data was obtained in the inter-observer and test-retest in the two samples. On the other hand, the internal consistency was somewhat low for all of the 10 histories. For this reason, and starting from a previous study, a reduced version of 5 histories was prepared, which showed good internal consistency. The patients with schizophrenia obtained a significantly lower score than the control subjects in 8 out of the 10 histories. The reduced Spanish version of the Hinting Task demonstrated good psychometric properties. When compared to the control group, the patients with schizophrenia had a deficit in theory of mind. Copyright © 2011 SEP y SEPB. Published by Elsevier Espana. All rights reserved.

High-resolution handheld rigid endomicroscope based on full-field optical coherence tomography

NASA Astrophysics Data System (ADS)

Benoit a la Guillaume, Emilie; Martins, Franck; Boccara, Claude; Harms, Fabrice

2016-02-01

Full-field optical coherence tomography (FF-OCT) is a powerful tool for nondestructive assessment of biological tissue, i.e., for the structural examination of tissue in depth at a cellular resolution. Mostly known as a microscopy device for ex vivo analysis, FF-OCT has also been adapted to endoscopy setups since it shows good potential for in situ cancer diagnosis and biopsy guidance. Nevertheless, all the attempts to perform endoscopic FF-OCT imaging did not go beyond lab setups. We describe here, to the best of our knowledge, the first handheld FF-OCT endoscope based on a tandem interferometry assembly using incoherent illumination. A common-path passive imaging interferometer at the tip of an optical probe makes it robust and insensitive to environmental perturbations, and a low finesse Fabry-Perot processing interferometer guarantees a compact system. A good resolution (2.7 μm transverse and 6 μm axial) is maintained through the long distance, small diameter relay optics of the probe, and a good signal-to-noise ratio is achieved in a limited 100 ms acquisition time. High-resolution images and a movie of a rat brain slice have been recorded by moving the contact endoscope over the surface of the sample, allowing for tissue microscopic exploration at 20 μm under the surface. These promising ex vivo results open new perspectives for in vivo imaging of biological tissue, in particular, in the field of cancer and surgical margin assessment.

Extreme High and Low Temperature Operation of the Silicon-On-Insulator Type CHT-OPA Operational Amplifier

NASA Technical Reports Server (NTRS)

Patterson, Richard; Hammoud, Ahmad; Elbuluk, Malik

2008-01-01

A new operational amplifier chip based on silicon-on-insulator technology was evaluated for potential use in extreme temperature environments. The CHT-OPA device is a low power, precision operational amplifier with rail-to-rail output swing capability, and it is rated for operation between -55 C and +225 C. A unity gain inverting circuit was constructed utilizing the CHT-OPA chip and a few passive components. The circuit was evaluated in the temperature range from -190 C to +200 C in terms of signal gain and phase shift, and supply current. The investigations were carried out to determine suitability of this device for use in space exploration missions and aeronautic applications under wide temperature incursion. Re-restart capability at extreme temperatures, i.e. power switched on while the device was soaked at extreme temperatures, was also investigated. In addition, the effects of thermal cycling under a wide temperature range on the operation of this high performance amplifier were determined. The results from this work indicate that this silicon-on-insulator amplifier chip maintained very good operation between +200 C and -190 C. The limited thermal cycling had no effect on the performance of the amplifier, and it was able to re-start at both -190 C and +200 C. In addition, no physical degradation or packaging damage was introduced due to either extreme temperature exposure or thermal cycling. The good performance demonstrated by this silicon-on-insulator operational amplifier renders it a potential candidate for use in space exploration missions or other environments under extreme temperatures. Additional and more comprehensive characterization is, however, required to establish the reliability and suitability of such devices for long term use in extreme temperature applications.