Science teacher’s idea about environmental concepts in science learning as the first step of science teacher training

NASA Astrophysics Data System (ADS)

Tapilouw, M. C.; Firman, H.; Redjeki, S.; Chandra, D. T.

2018-05-01

To refresh natural environmental concepts in science, science teacher have to attend a teacher training. In teacher training, all participant can have a good sharing and discussion with other science teacher. This study is the first step of science teacher training program held by education foundation in Bandung and attended by 20 science teacher from 18 Junior High School. The major aim of this study is gathering science teacher’s idea of environmental concepts. The core of questions used in this study are basic competencies linked with environmental concepts, environmental concepts that difficult to explain, the action to overcome difficulties and references in teaching environmental concepts. There are four major findings in this study. First finding, most environmental concepts are taught in 7th grade. Second finding, most difficult environmental concepts are found in 7th grade. Third finding, there are five actions to overcome difficulties. Fourth finding, science teacher use at least four references in mastering environmental concepts. After all, teacher training can be a solution to reduce difficulties in teaching environmental concepts.

De novo biosynthesis of anthocyanins in Saccharomyces cerevisiae.

PubMed

Eichenberger, Michael; Hansson, Anders; Fischer, David; Dürr, Lara; Naesby, Michael

2018-06-01

Anthocyanins (ACNs) are plant secondary metabolites responsible for most of the red, purple and blue colors of flowers, fruits and vegetables. They are increasingly used in the food and beverage industry as natural alternative to artificial colorants. Production of these compounds by fermentation of microorganisms would provide an attractive alternative. In this study, Saccharomyces cerevisiae was engineered for de novo production of the three basic anthocyanins, as well as the three main trans-flavan-3-ols. Enzymes from different plant sources were screened and efficient variants found for most steps of the biosynthetic pathway. However, the anthocyanidin synthase was identified as a major obstacle to efficient production. In yeast, this enzyme converts the majority of its natural substrates leucoanthocyanidins into the off-pathway flavonols. Nonetheless, de novo biosynthesis of ACNs was shown for the first time in yeast and for the first time in a single microorganism. It provides a framework for optimizing the activity of anthocyanidin synthase and represents an important step towards sustainable industrial production of these highly relevant molecules in yeast.

Preliminary Assessment of Operational Hazards and Safety Requirements for Airborne Trajectory Management (ABTM) Roadmap Applications

NASA Technical Reports Server (NTRS)

Cotton, William B.; Hilb, Robert; Koczo, Stefan, Jr.; Wing, David J.

2016-01-01

A set of five developmental steps building from the NASA TASAR (Traffic Aware Strategic Aircrew Requests) concept are described, each providing incrementally more efficiency and capacity benefits to airspace system users and service providers, culminating in a Full Airborne Trajectory Management capability. For each of these steps, the incremental Operational Hazards and Safety Requirements are identified for later use in future formal safety assessments intended to lead to certification and operational approval of the equipment and the associated procedures. Two established safety assessment methodologies that are compliant with the FAA's Safety Management System were used leading to Failure Effects Classifications (FEC) for each of the steps. The most likely FEC for the first three steps, Basic TASAR, Digital TASAR, and 4D TASAR, is "No effect". For step four, Strategic Airborne Trajectory Management, the likely FEC is "Minor". For Full Airborne Trajectory Management (Step 5), the most likely FEC is "Major".

Space station, 1959 to . .

NASA Astrophysics Data System (ADS)

Butler, G. V.

1981-04-01

Early space station designs are considered, taking into account Herman Oberth's first space station, the London Daily Mail Study, the first major space station design developed during the moon mission, and the Manned Orbiting Laboratory Program of DOD. Attention is given to Skylab, new space station studies, the Shuttle and Spacelab, communication satellites, solar power satellites, a 30 meter diameter radiometer for geological measurements and agricultural assessments, the mining of the moons, and questions of international cooperation. It is thought to be very probable that there will be very large space stations at some time in the future. However, for the more immediate future a step-by-step development that will start with Spacelab stations of 3-4 men is envisaged.

The evolution of the Antarctic ice sheet at the Eocene-Oligocene Transition.

NASA Astrophysics Data System (ADS)

Ladant, Jean-Baptiste; Donnadieu, Yannick; Dumas, Christophe

2017-04-01

An increasing number of studies suggest that the Middle to Late Eocene has witnessed the waxing and waning of relatively small ephemeral ice sheets. These alternating episodes culminated in the Eocene-Oligocene transition (34 - 33.5 Ma) during which a sudden and massive glaciation occurred over Antarctica. Data studies have demonstrated that this glacial event is constituted of two 50 kyr-long steps, the first of modest (10 - 30 m of equivalent sea level) and the second of major (50 - 90 m esl) glacial amplitude, and separated by 200 kyrs. Since a decade, modeling studies have put forward the primary role of CO2 in the initiation of this glaciation, in doing so marginalizing the original "gateway hypothesis". Here, we investigate the impacts of CO2 and orbital parameters on the evolution of the ice sheet during the 500 kyrs of the EO transition using a tri-dimensional interpolation method. The latter allows precise orbital variations, CO2 evolution and ice sheet feedbacks (including the albedo) to be accounted for. Our results show that orbital variations are instrumental in initiating the first step of the EO glaciation but that the primary driver of the major second step is the atmospheric pCO2 crossing a modelled glacial threshold of 900 ppm. Although model-dependant, this higher glacial threshold makes a stronger case for ephemeral Middle-Late Eocene ice sheets. In addition, sensitivity tests demonstrate that the small first step only exists if the absolute pCO2 value remains within 100 ppm higher than the glacial threshold during the first 250 kyrs of the transition. Thereby, the pCO2 sufficiently counterbalances the strong insolation minima occurring at 33.9 and 33.8 Ma but is low enough to allow the ice sheet to nucleate. Nevertheless, questions remain as to what may cause this pCO2 drop.

'Fishing' for Alternatives to Mountaintop Mining in Southern West Virginia

EPA Science Inventory

Mountaintop removal mining (MTR) is a major industry in southern West Virginia with many detrimental effects for small to mid-sized streams, and interest in alternative, sustainable industries is on the rise. As a first step in a larger effort to assess the value of sport fisheri...

USING WASTE TO CLEAN UP THE ENVIRONMENT: CELLULOSIC ETHANOL, THE FUTURE OF FUELS

EPA Science Inventory

In the process of converting municipal solid waste (MSW) into ethanol we optimized the first two major steps of pretreatment and enzymatic hydrolysis stages to enhance the sugar yield and to reduce the cost. For the pretreatment process, we tested different parameters of react...

Fundamental Reaction Pathway for Peptide Metabolism by Proteasome: Insights from First-principles Quantum Mechanical/Molecular Mechanical Free Energy Calculations

PubMed Central

Wei, Donghui; Fang, Lei; Tang, Mingsheng; Zhan, Chang-Guo

2013-01-01

Proteasome is the major component of the crucial nonlysosomal protein degradation pathway in the cells, but the detailed reaction pathway is unclear. In this study, first-principles quantum mechanical/molecular mechanical free energy calculations have been performed to explore, for the first time, possible reaction pathways for proteasomal proteolysis/hydrolysis of a representative peptide, succinyl-leucyl-leucyl-valyl-tyrosyl-7-amino-4-methylcoumarin (Suc-LLVY-AMC). The computational results reveal that the most favorable reaction pathway consists of six steps. The first is a water-assisted proton transfer within proteasome, activating Thr1-Oγ. The second is a nucleophilic attack on the carbonyl carbon of a Tyr residue of substrate by the negatively charged Thr1-Oγ, followed by the dissociation of the amine AMC (third step). The fourth step is a nucleophilic attack on the carbonyl carbon of the Tyr residue of substrate by a water molecule, accompanied by a proton transfer from the water molecule to Thr1-Nz. Then, Suc-LLVY is dissociated (fifth step), and Thr1 is regenerated via a direct proton transfer from Thr1-Nz to Thr1-Oγ. According to the calculated energetic results, the overall reaction energy barrier of the proteasomal hydrolysis is associated with the transition state (TS3b) for the third step involving a water-assisted proton transfer. The determined most favorable reaction pathway and the rate-determining step have provided a reasonable interpretation of the reported experimental observations concerning the substituent and isotopic effects on the kinetics. The calculated overall free energy barrier of 18.2 kcal/mol is close to the experimentally-derived activation free energy of ~18.3–19.4 kcal/mol, suggesting that the computational results are reasonable. PMID:24111489

Gynecologic oncology group strategies to improve timeliness of publication.

PubMed

Bialy, Sally; Blessing, John A; Stehman, Frederick B; Reardon, Anne M; Blaser, Kim M

2013-08-01

The Gynecologic Oncology Group (GOG) is a multi-institution cooperative group funded by the National Cancer Institute to conduct clinical trials encompassing clinical and basic scientific research in gynecologic malignancies. These results are disseminated via publication in peer-reviewed journals. This process requires collaboration of numerous investigators located in diverse cancer research centers. Coordination of manuscript development is positioned within the Statistical and Data Center (SDC), thus allowing the SDC personnel to manage the process and refine strategies to promote earlier dissemination of results. A major initiative to improve timeliness utilizing the assignment, monitoring, and enforcement of deadlines for each phase of manuscript development is the focus of this investigation. Document improvement in timeliness via comparison of deadline compliance and time to journal submission due to expanded administrative and technologic initiatives implemented in 2006. Major steps in the publication process include generation of first draft by the First Author and submission to SDC, Co-author review, editorial review by Publications Subcommittee, response to journal critique, and revision. Associated with each step are responsibilities of First Author to write or revise, collaborating Biostatistician to perform analysis and interpretation, and assigned SDC Clinical Trials Editorial Associate to format/revise according to journal requirements. Upon the initiation of each step, a deadline for completion is assigned. In order to improve efficiency, a publications database was developed to track potential steps in manuscript development that enables the SDC Director of Administration and the Publications Subcommittee Chair to assign, monitor, and enforce deadlines. They, in turn, report progress to Group Leadership through the Operations Committee. The success of the strategies utilized to improve the GOG publication process was assessed by comparing the timeliness of each potential step in the development of primary Phase II manuscripts during 2003-2006 versus 2007-2010. Improvement was noted in 10 of 11 identified steps resulting in a cumulative average improvement of 240 days from notification of data maturity to First Author through first submission to a journal. Moreover, the average time to journal acceptance has improved by an average of 346 days. The investigation is based on only Phase II trials to ensure comparability of manuscript complexity. Nonetheless, the procedures employed are applicable to the development of any clinical trials manuscript. The assignment, monitoring, and enforcement of deadlines for all stages of manuscript development have resulted in increased efficiency and timeliness. The positioning and support of manuscript development within the SDC provide a valuable resource to authors in meeting assigned deadlines, accomplishing peer review, and complying with journal requirements.

Rapid Two-Step Procedure for Large-Scale Purification of Pediocin-Like Bacteriocins and Other Cationic Antimicrobial Peptides from Complex Culture Medium

PubMed Central

Uteng, Marianne; Hauge, Håvard Hildeng; Brondz, Ilia; Nissen-Meyer, Jon; Fimland, Gunnar

2002-01-01

A rapid and simple two-step procedure suitable for both small- and large-scale purification of pediocin-like bacteriocins and other cationic peptides has been developed. In the first step, the bacterial culture was applied directly on a cation-exchange column (1-ml cation exchanger per 100-ml cell culture). Bacteria and anionic compounds passed through the column, and cationic bacteriocins were subsequently eluted with 1 M NaCl. In the second step, the bacteriocin fraction was applied on a low-pressure, reverse-phase column and the bacteriocins were detected as major optical density peaks upon elution with propanol. More than 80% of the activity that was initially in the culture supernatant was recovered in both purification steps, and the final bacteriocin preparation was more than 90% pure as judged by analytical reverse-phase chromatography and capillary electrophoresis. PMID:11823243

Fracture control methods for space vehicles. Volume 1: Fracture control design methods. [for space shuttle configuration planning

NASA Technical Reports Server (NTRS)

Liu, A. F.

1974-01-01

A systematic approach for applying methods for fracture control in the structural components of space vehicles consists of four major steps. The first step is to define the primary load-carrying structural elements and the type of load, environment, and design stress levels acting upon them. The second step is to identify the potential fracture-critical parts by means of a selection logic flow diagram. The third step is to evaluate the safe-life and fail-safe capabilities of the specified part. The last step in the sequence is to apply the control procedures that will prevent damage to the fracture-critical parts. The fracture control methods discussed include fatigue design and analysis methods, methods for preventing crack-like defects, fracture mechanics analysis methods, and nondestructive evaluation methods. An example problem is presented for evaluation of the safe-crack-growth capability of the space shuttle crew compartment skin structure.

A proposed adaptive step size perturbation and observation maximum power point tracking algorithm based on photovoltaic system modeling

NASA Astrophysics Data System (ADS)

Huang, Yu

Solar energy becomes one of the major alternative renewable energy options for its huge abundance and accessibility. Due to the intermittent nature, the high demand of Maximum Power Point Tracking (MPPT) techniques exists when a Photovoltaic (PV) system is used to extract energy from the sunlight. This thesis proposed an advanced Perturbation and Observation (P&O) algorithm aiming for relatively practical circumstances. Firstly, a practical PV system model is studied with determining the series and shunt resistances which are neglected in some research. Moreover, in this proposed algorithm, the duty ratio of a boost DC-DC converter is the object of the perturbation deploying input impedance conversion to achieve working voltage adjustment. Based on the control strategy, the adaptive duty ratio step size P&O algorithm is proposed with major modifications made for sharp insolation change as well as low insolation scenarios. Matlab/Simulink simulation for PV model, boost converter control strategy and various MPPT process is conducted step by step. The proposed adaptive P&O algorithm is validated by the simulation results and detail analysis of sharp insolation changes, low insolation condition and continuous insolation variation.

Sequence-Dependent Diastereospecific and Diastereodivergent Crosslinking of DNA by Decarbamoylmitomycin C.

PubMed

Aguilar, William; Paz, Manuel M; Vargas, Anayatzinc; Clement, Cristina C; Cheng, Shu-Yuan; Champeil, Elise

2018-04-20

Mitomycin C (MC), a potent antitumor drug, and decarbamoylmitomycin C (DMC), a derivative lacking the carbamoyl group, form highly cytotoxic DNA interstrand crosslinks. The major interstrand crosslink formed by DMC is the C1'' epimer of the major crosslink formed by MC. The molecular basis for the stereochemical configuration exhibited by DMC was investigated using biomimetic synthesis. The formation of DNA-DNA crosslinks by DMC is diastereospecific and diastereodivergent: Only the 1''S-diastereomer of the initially formed monoadduct can form crosslinks at GpC sequences, and only the 1''R-diastereomer of the monoadduct can form crosslinks at CpG sequences. We also show that CpG and GpC sequences react with divergent diastereoselectivity in the first alkylation step: 1"S stereochemistry is favored at GpC sequences and 1''R stereochemistry is favored at CpG sequences. Therefore, the first alkylation step results, at each sequence, in the selective formation of the diastereomer able to generate an interstrand DNA-DNA crosslink after the "second arm" alkylation. Examination of the known DNA adduct pattern obtained after treatment of cancer cell cultures with DMC indicates that the GpC sequence is the major target for the formation of DNA-DNA crosslinks in vivo by this drug. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Current surgical management of mitral regurgitation.

PubMed

Calvinho, Paulo; Antunes, Manuel

2008-04-01

From Walton Lillehei, who performed the first successful open mitral valve surgery in 1956, until the advent of robotic surgery in the 21st Century, only 50 years have passed. The introduction of the first heart valve prosthesis, in 1960, was the next major step forward. However, correction of mitral disease by valvuloplasty results in better survival and ventricular performance than mitral valve replacement. However, the European Heart Survey demonstrated that only 40% of the valves are repaired. The standard procedures (Carpentier's techniques and Alfieri's edge-to-edge suture) are the surgical basis for the new technical approaches. Minimally invasive surgery led to the development of video-assisted and robotic surgery and interventional cardiology is already making the first steps on endovascular procedures, using the classical concepts in highly differentiated approaches. Correction of mitral regurgitation is a complex field that is still growing, whereas classic surgery is still under debate as the new era arises.

Early Warning Systems: Re-Engaging Chronic Truants

ERIC Educational Resources Information Center

Chorneau, Tom

2012-01-01

School attendance can be an early indicator that something is going wrong with a student. Gathering, analyzing, and acting on attendance information is a first step toward school improvement. Meanwhile, the majority of the states are moving to build and enhance what are called "early warning systems," intended to flag at-risk students during their…

Continuing Education Needs of the Office Oncology Nurse.

ERIC Educational Resources Information Center

Rogers, Miriam P.

1999-01-01

A study determined the learning needs of office oncology nurses (n=290)as a critical first step in planning education programs. Participants ranked cancer-care topics similarly, regardless of age, background, or experience. The highest-ranked needs were clustered in the areas of cancer nursing practice, major cancers, and cancer treatment.…

Communication Within the Educational Research and Development Community--Suggested Steps Toward Further Structure and Order

ERIC Educational Resources Information Center

Nelson, Carnot E.

1973-01-01

Identifies two major problems--first, both the formal and informal communication networks are extremely diffuse; and second, the interval from the start of a piece of research until its integration into the archival body of scientific knowledge is long--and presents some suggestions for alleviating them. (Author/JM)

Parental Perceptions and Recommendations of Computing Majors: A Technology Acceptance Model Approach

ERIC Educational Resources Information Center

Powell, Loreen; Wimmer, Hayden

2017-01-01

Currently, there are more technology related jobs then there are graduates in supply. The need to understand user acceptance of computing degrees is the first step in increasing enrollment in computing fields. Additionally, valid measurement scales for predicting user acceptance of Information Technology degree programs are required. The majority…

Evidence of major genes affecting stress response in rainbow trout using Bayesian methods of complex segregation analysis

USDA-ARS?s Scientific Manuscript database

As a first step towards the genetic mapping of quantitative trait loci (QTL) affecting stress response variation in rainbow trout, we performed complex segregation analyses (CSA) fitting mixed inheritance models of plasma cortisol using Bayesian methods in large full-sib families of rainbow trout. ...

Using Personality Data to Make Decisions about Global Managers

ERIC Educational Resources Information Center

Ramesh, Anuradha; Hazucha, Joy F.; Bank, Jurgen

2008-01-01

A major challenge that decisions makers face in multi-national organizations is how to compare managers from different parts of the globe. This challenge is both psychometric and practical. We draw on the cross-cultural psychology literature to propose a three-step framework to compare personality data from different countries. The first step…

Elementary School English Teachers' Professional Learning from Teaching Demonstrations as Professional Development

ERIC Educational Resources Information Center

Chien, Chin-Wen

2017-01-01

This study used interviews, observations and documentary evidence to analyze the professional learning of sixteen elementary school English teachers and two expert teachers during the pre-observation conference, observation, and post-observation conference from three-step teaching demonstrations. This study has the following major findings. First,…

Serial transverse enteroplasty to facilitate enteral autonomy in selected children with short bowel syndrome.

PubMed

Wester, T; Borg, H; Naji, H; Stenström, P; Westbacke, G; Lilja, H E

2014-09-01

Serial transverse enteroplasty (STEP) was first described in 2003 as a method for lengthening and tapering of the bowel in short bowel syndrome. The aim of this multicentre study was to review the outcome of a Swedish cohort of children who underwent STEP. All children who had a STEP procedure at one of the four centres of paediatric surgery in Sweden between September 2005 and January 2013 were included in this observational cohort study. Demographic details, and data from the time of STEP and at follow-up were collected from the case records and analysed. Twelve patients had a total of 16 STEP procedures; four children underwent a second STEP. The first STEP was performed at a median age of 5·8 (range 0·9-19·0) months. There was no death at a median follow-up of 37·2 (range 3·0-87·5) months and no child had small bowel transplantation. Seven of the 12 children were weaned from parenteral nutrition at a median of 19·5 (range 2·3-42·9) months after STEP. STEP is a useful procedure for selected patients with short bowel syndrome and seems to facilitate weaning from parenteral nutrition. At mid-term follow-up a majority of the children had achieved enteral autonomy. The study is limited by the small sample size and lack of a control group. © 2014 The Authors. BJS published by John Wiley & Sons Ltd on behalf of BJS Society Ltd.

DEFICIENT LIMB SUPPORT IS A MAJOR CONTRIBUTOR TO AGE-DIFFERENCES IN FALLING

PubMed Central

Pavol, Michael J.; Pai, Yi-Chung

2010-01-01

Older adults are more likely than young to fall upon a loss of balance, yet the factors responsible for this difference are not well understood. This study investigated whether age-related differences in movement stability, limb support, and reactive stepping contribute to the greater likelihood of falling among older adults. Sixty young and 41 older, safety-harnessed, healthy adults were exposed to a novel and unexpected forward slip during a sit-to-stand task. More older than young adults fell (76% vs. 30%). Falls in both age groups were related to lesser stability and lower hip height at first step touchdown, with 97.1% of slip outcomes correctly classified based on these variables. Decreases in hip height at touchdown had over 20 times greater effect on the odds of falling than equivalent decreases in stability. Three age-differences placed older adults at greater risk of falling: older adults had lower and more slowly rising hips at slip onset, they were less likely to respond to slipping with forceful limb extension, and they placed their stepping foot less posterior to their center of mass. The first two differences, each associated with deficient limb support, reduced hip ascent and increased hip descent. The third difference resulted in lesser stability at step touchdown. These results suggest that deficient limb support in normal movement patterns and in the reactive response to a perturbation is a major contributor to the high incidence of falls in older adults. Improving proactive and reactive limb support should be a focus of fall prevention efforts. PMID:16876174

Deficient limb support is a major contributor to age differences in falling.

PubMed

Pavol, Michael J; Pai, Yi-Chung

2007-01-01

Older adults are more likely than young to fall upon a loss of balance, yet the factors responsible for this difference are not well understood. This study investigated whether age-related differences in movement stability, limb support, and protective stepping contribute to the greater likelihood of falling among older adults. Sixty young and 41 older, safety-harnessed, healthy adults were exposed to a novel and unexpected forward slip during a sit-to-stand task. More older than young adults fell (76% vs. 30%). Falls in both age groups were related to lesser stability and lower hip height at first step touchdown, with 97.1% of slip outcomes correctly classified based on these variables. Decreases in hip height at touchdown had over 20 times greater effect on the odds of falling than equivalent decreases in stability. Three age differences placed older adults at greater risk of falling: older adults had lower and more slowly rising hips at slip onset, they were less likely to respond to slipping with ample limb support, and they placed their stepping foot less posterior to their center of mass. The first two differences, each associated with deficient limb support, reduced hip ascent and increased hip descent. The third difference resulted in lesser stability at step touchdown. These results suggest that deficient limb support in normal movement patterns and in the reactive response to a perturbation is a major contributor to the high incidence of falls in older adults. Improving proactive and reactive limb support should be a focus of fall prevention efforts.

Titanium: Industrial Base, Price Trends, and Technology Initiatives

DTIC Science & Technology

2009-01-01

respectively.3 All titanium metal production begins with rutile (titanium oxide, or TiO2). High-titania slag , produced by ilmen- ite smelting, is the first...Ilmenite ores are used in iron production. They leave a TiO2-rich slag , which is usually upgraded to be used in titanium production. 4 According to the...and least expensive process for producing titanium sponge, has four major steps. First, rutile con- centrate or synthetic rutile (titanium slag ) is

Childhood malnutrition in Egypt using geoadditive Gaussian and latent variable models.

PubMed

Khatab, Khaled

2010-04-01

Major progress has been made over the last 30 years in reducing the prevalence of malnutrition amongst children less than 5 years of age in developing countries. However, approximately 27% of children under the age of 5 in these countries are still malnourished. This work focuses on the childhood malnutrition in one of the biggest developing countries, Egypt. This study examined the association between bio-demographic and socioeconomic determinants and the malnutrition problem in children less than 5 years of age using the 2003 Demographic and Health survey data for Egypt. In the first step, we use separate geoadditive Gaussian models with the continuous response variables stunting (height-for-age), underweight (weight-for-age), and wasting (weight-for-height) as indicators of nutritional status in our case study. In a second step, based on the results of the first step, we apply the geoadditive Gaussian latent variable model for continuous indicators in which the 3 measurements of the malnutrition status of children are assumed as indicators for the latent variable "nutritional status".

[The biomechanics of hyperextension injuries of the subaxial cervical spine].

PubMed

Stein, G; Meyer, C; Ingenhoff, L; Bredow, J; Müller, L P; Eysel, P; Schiffer, G

2017-07-01

Hyperextension injuries of the subaxial cervical spine are potentially hazardous due to relevant destabilization. Depending on the clinical condition, neurologic or vascular damage may occur. Therefore an exact knowledge of the factors leading to destabilization is essential. In a biomechanical investigation, 10 fresh human cadaver cervical spine specimens were tested in a spine simulator. The tested segments were C4 to 7. In the first step, physiologic motion was investigated. Afterwards, the three steps of injury were dissection of the anterior longitudinal ligament, removal of the intervertebral disc/posterior longitudinal ligament, and dissection of the interspinous ligaments/ligamentum flavum. After each step, the mobility was determined. Regarding flexion and extension, an increase in motion of 8.36 % after the first step, 90.45 % after the second step, and 121.67 % after the last step was observed. Testing of lateral bending showed an increase of mobility of 7.88 %/27.48 %/33.23 %; axial rotation increased by 2.87 %/31.16 %/45.80 %. Isolated dissection of the anterior longitudinal ligament led to minor destabilization, whereas the intervertebral disc has to be seen as a major stabilizer of the cervical spine. Few finite-element studies showed comparable results. If a transfer to clinical use is undertaken, an isolated rupture of the anterior longitudinal ligament can be treated without surgical stabilization.

Network meta-analysis: application and practice using Stata

PubMed Central

2017-01-01

This review aimed to arrange the concepts of a network meta-analysis (NMA) and to demonstrate the analytical process of NMA using Stata software under frequentist framework. The NMA tries to synthesize evidences for a decision making by evaluating the comparative effectiveness of more than two alternative interventions for the same condition. Before conducting a NMA, 3 major assumptions—similarity, transitivity, and consistency—should be checked. The statistical analysis consists of 5 steps. The first step is to draw a network geometry to provide an overview of the network relationship. The second step checks the assumption of consistency. The third step is to make the network forest plot or interval plot in order to illustrate the summary size of comparative effectiveness among various interventions. The fourth step calculates cumulative rankings for identifying superiority among interventions. The last step evaluates publication bias or effect modifiers for a valid inference from results. The synthesized evidences through five steps would be very useful to evidence-based decision-making in healthcare. Thus, NMA should be activated in order to guarantee the quality of healthcare system. PMID:29092392

Network meta-analysis: application and practice using Stata.

PubMed

Shim, Sungryul; Yoon, Byung-Ho; Shin, In-Soo; Bae, Jong-Myon

2017-01-01

This review aimed to arrange the concepts of a network meta-analysis (NMA) and to demonstrate the analytical process of NMA using Stata software under frequentist framework. The NMA tries to synthesize evidences for a decision making by evaluating the comparative effectiveness of more than two alternative interventions for the same condition. Before conducting a NMA, 3 major assumptions-similarity, transitivity, and consistency-should be checked. The statistical analysis consists of 5 steps. The first step is to draw a network geometry to provide an overview of the network relationship. The second step checks the assumption of consistency. The third step is to make the network forest plot or interval plot in order to illustrate the summary size of comparative effectiveness among various interventions. The fourth step calculates cumulative rankings for identifying superiority among interventions. The last step evaluates publication bias or effect modifiers for a valid inference from results. The synthesized evidences through five steps would be very useful to evidence-based decision-making in healthcare. Thus, NMA should be activated in order to guarantee the quality of healthcare system.

USDA Forest Service national protocols for sampling air pollution-sensitive waters

Treesearch

T. J. Sullivan

2012-01-01

The first step in designing a surface water sampling program is identifying one or more problems or questions that require information on water quality. Common water quality problems include nutrient enrichment (from a variety of causes), effects of atmospheric deposition (acidification, eutrophication, toxicity), and effects of major disturbances such as fire or pest...

Our Kids: A McREL Report Prepared for Stupski Foundation's Learning System

ERIC Educational Resources Information Center

Germeroth, Carrie; Barker, Jane; Arens, Sheila; Wang, Xin

2009-01-01

This document is one of eight reports prepared to support the development of a new learning system, a development effort that is the first step in a major initiative undertaken by the Stupski Foundation. This document synthesizes recent research and theoretical literature on the special learning needs of urban, underserved students, whom are…

Truancy: First Step to a Lifetime of Problems.

ERIC Educational Resources Information Center

Garry, Eileen M.; And Others

1996-01-01

Truancy is a major problem in the United States that can have negative effects on the futures of young people. Truancy may lead to dropping out of school; may be a precursor to delinquent and criminal activity; and places students at higher risk of being drawn into behaviors involving drugs, alcohol, or violence. Furthermore, truancy has high…

Improving Student Performance in California: Analysis of First Year's Education Legislation.

ERIC Educational Resources Information Center

Berman, Weiler Associates, Berkeley, CA.

The California Roundtable (CRT) played a critical role in the shaping and passage of California's Senate Bill 813 (SB 813), the State's major education reform legislation enacted in July 1983. This working paper analyzes the content of the legislation, assesses its likely impact on student performance, and recommends steps the CRT (a consortium of…

Student Supports: A McREL Report Prepared for Stupski Foundation's Learning System

ERIC Educational Resources Information Center

Moore, Laurie; Rease, David; Barker, Jane

2009-01-01

This document is one of eight reports prepared to support the development of a new learning system, a development effort that is the first step in a major initiative undertaken by the Stupski Foundation. This document synthesizes recent research and theoretical literature on effective strategies for supporting urban, underserved students'…

Cultural Context of School Communities in Rural Hawaii to Inform Youth Violence Prevention

ERIC Educational Resources Information Center

Affonso, Dyanne D.; Mayberry, Linda; Shibuya, June Y.; Archambeau, Olga G.; Correa, Mary; Deliramich, Aimee N.; Frueh, B. Christopher

2010-01-01

Background: Escalation of youth violence within a large geographic school-complex area in southeastern rural Hawaii became a major problem in 2006. How cultural forces impact the problem was an impetus to examine youth violence from perspectives of adults and children in rural communities. Gathering these data was an essential first step toward…

Equitably Distributing Quality of Marine Security Guards Using Integer Programming

DTIC Science & Technology

2013-03-01

Model for Fix-It Shop-Assignment (From Balakrishnan et al ., 2007...LP; Balakrishnan et al ., 2007). The Soviet mathematician A. N. Kolmogorov is recognized as the first person to conceptually develop the idea of LP...commercial sector today. Balakrishnan et al . (2007) captured the three major steps in LP, which are formulation, solution, and interpretation and

First Steps to the Last Frontier: Programming Suggestions for Alaskan Adventures.

ERIC Educational Resources Information Center

Miner, Todd

This article provides an overview of trip programming in Alaska for those seeking a low-cost wilderness adventure. Alaska is a land of glaciers, mountains, lakes, rivers, forests, and wildlife. Safety is a major concern when traveling in Alaska. A local guide or outdoor educator can assist with safety and logistical planning. Travelers should plan…

Against the inalienable right to withdraw from research.

PubMed

Chwang, Eric

2008-08-01

In this paper I argue, against the current consensus, that the right to withdraw from research is sometimes alienable. In other words, research subjects are sometimes morally permitted to waive their right to withdraw. The argument proceeds in three major steps. In the first step, I argue that rights typically should be presumed alienable, both because that is not illegitimately coercive and because the general paternalistic motivation for keeping them inalienable is untenable. In the second step of the argument, I consider three special characteristics of the right to withdraw, first that its waiver might be exploitative, second that research involves intimate bodily access, and third that it is irreversible. I argue that none of these characteristics justify an inalienable right to withdraw. In the third step, I examine four considerations often taken to justify various other allegedly inalienable rights: concerns about treating yourself merely as a means as might be the case in suicide, concerns about revoking all your future freedoms in slavery contracts, the resolution of coordination problems, and public interest. I argue that the motivations involved in these four types of situations do not apply to the right to withdraw from research.

Revealing biological information using data structuring and automated learning.

PubMed

Mohorianu, Irina; Moulton, Vincent

2010-11-01

The intermediary steps between a biological hypothesis, concretized in the input data, and meaningful results, validated using biological experiments, commonly employ bioinformatics tools. Starting with storage of the data and ending with a statistical analysis of the significance of the results, every step in a bioinformatics analysis has been intensively studied and the resulting methods and models patented. This review summarizes the bioinformatics patents that have been developed mainly for the study of genes, and points out the universal applicability of bioinformatics methods to other related studies such as RNA interference. More specifically, we overview the steps undertaken in the majority of bioinformatics analyses, highlighting, for each, various approaches that have been developed to reveal details from different perspectives. First we consider data warehousing, the first task that has to be performed efficiently, optimizing the structure of the database, in order to facilitate both the subsequent steps and the retrieval of information. Next, we review data mining, which occupies the central part of most bioinformatics analyses, presenting patents concerning differential expression, unsupervised and supervised learning. Last, we discuss how networks of interactions of genes or other players in the cell may be created, which help draw biological conclusions and have been described in several patents.

First Isolate of KPC-2-Producing Klebsiella pneumonaie Sequence Type 23 from the Americas

PubMed Central

Cejas, Daniela; Fernández Canigia, Liliana; Rincón Cruz, Giovanna; Elena, Alan X.; Maldonado, Ivana; Gutkind, Gabriel O.

2014-01-01

KPC-2-producing Klebsiella pneumoniae isolates mainly correspond to clonal complex 258 (CC258); however, we describe KPC-2-producing K. pneumoniae isolates belonging to invasive sequence type 23 (ST23). KPC-2 has scarcely been reported to occur in ST23, and this report describes the first isolation of this pathogen in the Americas. Acquisition of resistant markers in virulent clones could mark an evolutionary step toward the establishment of these clones as major nosocomial pathogens. PMID:25031447

Modeling fatigue.

PubMed

Sumner, Walton; Xu, Jin Zhong

2002-01-01

The American Board of Family Practice is developing a patient simulation program to evaluate diagnostic and management skills. The simulator must give temporally and physiologically reasonable answers to symptom questions such as "Have you been tired?" A three-step process generates symptom histories. In the first step, the simulator determines points in time where it should calculate instantaneous symptom status. In the second step, a Bayesian network implementing a roughly physiologic model of the symptom generates a value on a severity scale at each sampling time. Positive, zero, and negative values represent increased, normal, and decreased status, as applicable. The simulator plots these values over time. In the third step, another Bayesian network inspects this plot and reports how the symptom changed over time. This mechanism handles major trends, multiple and concurrent symptom causes, and gradually effective treatments. Other temporal insights, such as observations about short-term symptom relief, require complimentary mechanisms.

Interactions of aniline with soil and groundwater at an industrial spill site.

PubMed Central

Kosson, D S; Byrne, S V

1995-01-01

The interactions of aniline with soil at an industrial spill site were investigated. Sorption of aniline to the soil was observed to occur through a two-step mechanism. The first step was an ion exchange process with the protonated amine serving as an organic cation. This step was influenced by solution pH and ionic composition. The second step was covalent bonding most likely with quinone moieties and oxidation with polymerization of aniline. The extent of covalent bonding was influenced by the presence of oxygen and redox potential. The majority of aniline that was bound to the soil did not readily desorb under a variety of abiotic conditions. However, aniline was released to a significant extent in the presence of denitrifying and methanogenic microbial activity. Aniline in aqueous solution was readily biodegradable under aerobic and denitrifying conditions. Soil-bound aniline was observed not to be biodegradable. This paper provides an overview of results. PMID:8565915

Building a World-Class Front-Line Workforce: The Need for Occupational Skill Standards in State Workforce Preparation Programs. EQW Working Papers.

ERIC Educational Resources Information Center

Sheets, Robert G.

Establishment of a national-state system of world-class occupational skill standards is a first step in restructuring adult vocational-technical education and job training programs. Occupational skills standards provide the necessary foundation for addressing three major state policy issues: the state's proper role in private work-based training,…

Cultivating Innovative and Entrepreneurial Talent in the Higher Vocational Automotive Major with the "On-Board Educational Factory" Model

ERIC Educational Resources Information Center

Wu, Zhuang-Wen; Zhu, Liang-Rong

2017-01-01

In this paper, we investigate the steps necessary to initiate reform in professional education. First, we analyze the advantages and disadvantages of the unified theory and practice model of education currently adopted in mainland China. Next, we suggest a talent cultivation strategy that prioritizes students and views industrial (factory)…

Effects of temperature on anaerobic decomposition of high-molecular weight organic matter under sulfate-reducing conditions

NASA Astrophysics Data System (ADS)

Matsui, Takato; Kojima, Hisaya; Fukui, Manabu

2013-03-01

Most sedimentary mineralization occurs along coasts under anaerobic conditions. In the absence of oxygen, high-molecular weight organic matter in marine sediments is gradually decomposed by hydrolysis, fermentation and sulfate reduction. Because of the different responses of the respective steps to temperature, degradation may be specifically slowed or stopped in certain step. To evaluate the effect of temperature on cellobiose degradation, culture experiments were performed at six different temperatures (3 °C, 8 °C, 13 °C, 18 °C, 23 °C, and 28 °C) under sulfate-reducing conditions. This study measured the concentrations of sulfide, dissolved organic carbon (DOC), and organic acids during that degradation. Degradation patterns were divided into three temperature groups: 3 °C, 8/13 °C, and 18/23/28 °C. The decrease in DOC proceeded in two steps, except at 3 °C. The length of the stagnant phase separating these two steps differed greatly between temperatures of 8/13 °C and 18/23/28 °C. In the first step, organic carbon was consumed by hydrolysis, fermentation and sulfate reduction. In the second step, acetate accumulated during the first step was oxidized by sulfate reduction. Bacterial communities in the cultures were analyzed by denaturing gradient gel electrophoresis (DGGE); the major differences among the three temperature groups were attributed to shifts in acetate-using sulfate reducers of the genus Desulfobacter. This suggests that temperature characteristics of dominant acetate oxidizers are important factors in determining the response of carbon flow in coastal marine sediments in relation to the changes in temperature.

Mobilization of major inorganic ions during experimental diagenesis of characterized peats

USGS Publications Warehouse

Bailey, A.M.; Cohen, A.D.; Orem, W.H.; Blackson, J.H.

2000-01-01

Laboratory experiments were undertaken to study changes in concentrations of major inorganic ions during simulated burial of peats to about 1.5 km. Cladium, Rhizophora, and Cyrilla peats were first analyzed to determine cation distributions among fractions of the initial materials and minerals in residues from wet oxidation. Subsamples of the peats (80 g) were then subjected to increasing temperatures and pressures in steps of 5??C and 300 psi at 2-day intervals and produced solutions collected. After six steps, starting from 30??C and 300 psi, a final temperature of 60??C and a final pressure of 2100 psi were achieved. The system was then allowed to stand for an additional 2 weeks at 60??C and 2100 psi. Treatments resulted in highly altered organic solids resembling lignite and expelled solutions of systematically varying compositions. Solutions from each step were analyzed for Na+, Ca2+, Mg2+, total dissolved Si (Si(T)), Cl-, SO42-, and organic acids and anions (OAAs). Some data on total dissolved Al (Al(T)) were also collected. Mobilization of major ions from peats during these experiments is controlled by at least three processes: (1) loss of dissolved ions in original porewater expelled during compaction, (2) loss of adsorbed cations as adsorption sites are lost during modification of organic solids, and (3) increased dissolution of inorganic phases at later steps due to increased temperatures (Si(T)) and increased complexing by OAAs (Al(T)). In general, results provide insight into early post-burial inorganic changes occurring during maturation of terrestrial organic matter. (C) 2000 Elsevier Science B.V. All rights reserved.

Objectively Measured Daily Steps and Subsequent Long Term All-Cause Mortality: The Tasped Prospective Cohort Study.

PubMed

Dwyer, Terence; Pezic, Angela; Sun, Cong; Cochrane, Jenny; Venn, Alison; Srikanth, Velandai; Jones, Graeme; Shook, Robin P; Shook, Robin; Sui, Xuemei; Ortaglia, Andrew; Blair, Steven; Ponsonby, Anne-Louise

2015-01-01

Self-reported physical activity has been inversely associated with mortality but the effect of objectively measured step activity on mortality has never been evaluated. The objective is to determine the prospective association of daily step activity on mortality among free-living adults. Cohort study of free-living adults residing in Tasmania, Australia between 2000 and 2005 who participated in one of three cohort studies (n = 2 576 total participants). Daily step activity by pedometer at baseline at a mean of 58.8 years of age, and for a subset, repeated monitoring was available 3.7 (SD 1.3) years later (n = 1 679). All-cause mortality (n = 219 deaths) was ascertained by record-linkage to the Australian National Death Index; 90% of participants were followed-up over ten years, until June 2011. Higher daily step count at baseline was linearly associated with lower all-cause mortality (adjusted hazard ratio AHR, 0.94; 95% CI, 0.90 to 0.98 per 1 000 steps; P = 0.004). Risk was altered little by removing deaths occurring in the first two years. Increasing baseline daily steps from sedentary to 10 000 steps a day was associated with a 46% (95% CI, 18% to 65%; P = 0.004) lower risk of mortality in the decade of follow-up. In addition, those who increased their daily steps over the monitoring period had a substantial reduction in mortality risk, after adjusting for baseline daily step count (AHR, 0.39; 95% CI, 0.22 to 0.72; P = 0.002), or other factors (AHR, 0.38; 95% CI, 0.21-0.70; P = 0.002). Higher daily step count was linearly associated with subsequent long term mortality among free living adults. These data are the first to quantify mortality reductions using an objective measure of physical activity in a free living population. They strongly underscore the importance of physical inactivity as a major public health problem.

Step-grandparenthood in the United States.

PubMed

Yahirun, Jenjira J; Park, Sung S; Seltzer, Judith A

2018-01-18

This study provides new information about the demography of step-grandparenthood in the United States. Specifically, we examine the prevalence of step-grandparenthood across birth cohorts and for socioeconomic and racial/ethnic groups. We also examine lifetime exposure to the step-grandparent role. Using data from the Panel Study of Income Dynamics and the Health and Retirement Study, we use percentages to provide first estimates of step-grandparenthood and to describe demographic and socioeconomic variation in who is a step-grandparent. We use life tables to estimate the exposure to step-grandparenthood. The share of step-grandparents is increasing across birth cohorts. However, individuals without a college education and non-Whites are more likely to become step-grandparents. Exposure to the step-grandparent role accounts for approximately 15% of total grandparent years at age 65 for women and men. A growing body of research finds that grandparents are increasingly instrumental in the lives of younger generations. However, the majority of this work assumes that these ties are biological, with little attention paid to the role of family complexity across three generations. Understanding the demographics of step-grandparenthood sheds light on the family experiences of an overlooked, but growing segment of the older adult population in the United States. © The Author(s) 2018. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Inverting the planning gradient: adjustment of grasps to late segments of multi-step object manipulations.

PubMed

Mathew, Hanna; Kunde, Wilfried; Herbort, Oliver

2017-05-01

When someone grasps an object, the grasp depends on the intended object manipulation and usually facilitates it. If several object manipulation steps are planned, the first step has been reported to primarily determine the grasp selection. We address whether the grasp can be aligned to the second step, if the second step's requirements exceed those of the first step. Participants grasped and rotated a dial first by a small extent and then by various extents in the opposite direction, without releasing the dial. On average, when the requirements of the first and the second step were similar, participants mostly aligned the grasp to the first step. When the requirements of the second step were considerably higher, participants aligned the grasp to the second step, even though the first step still had a considerable impact. Participants employed two different strategies. One subgroup initially aligned the grasp to the first step and then ceased adjusting the grasp to either step. Another group also initially aligned the grasp to the first step and then switched to aligning it primarily to the second step. The data suggest that participants are more likely to switch to the latter strategy when they experienced more awkward arm postures. In summary, grasp selections for multi-step object manipulations can be aligned to the second object manipulation step, if the requirements of this step clearly exceed those of the first step and if participants have some experience with the task.

Big Data-Based Approach to Detect, Locate, and Enhance the Stability of an Unplanned Microgrid Islanding

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Huaiguang; Li, Yan; Zhang, Yingchen

In this paper, a big data-based approach is proposed for the security improvement of an unplanned microgrid islanding (UMI). The proposed approach contains two major steps: the first step is big data analysis of wide-area monitoring to detect a UMI and locate it; the second step is particle swarm optimization (PSO)-based stability enhancement for the UMI. First, an optimal synchrophasor measurement device selection (OSMDS) and matching pursuit decomposition (MPD)-based spatial-temporal analysis approach is proposed to significantly reduce the volume of data while keeping appropriate information from the synchrophasor measurements. Second, a random forest-based ensemble learning approach is trained to detectmore » the UMI. When combined with grid topology, the UMI can be located. Then the stability problem of the UMI is formulated as an optimization problem and the PSO is used to find the optimal operational parameters of the UMI. An eigenvalue-based multiobjective function is proposed, which aims to improve the damping and dynamic characteristics of the UMI. Finally, the simulation results demonstrate the effectiveness and robustness of the proposed approach.« less

Distributed parameter modeling of repeated truss structures

NASA Technical Reports Server (NTRS)

Wang, Han-Ching

1994-01-01

A new approach to find homogeneous models for beam-like repeated flexible structures is proposed which conceptually involves two steps. The first step involves the approximation of 3-D non-homogeneous model by a 1-D periodic beam model. The structure is modeled as a 3-D non-homogeneous continuum. The displacement field is approximated by Taylor series expansion. Then, the cross sectional mass and stiffness matrices are obtained by energy equivalence using their additive properties. Due to the repeated nature of the flexible bodies, the mass, and stiffness matrices are also periodic. This procedure is systematic and requires less dynamics detail. The first step involves the homogenization from a 1-D periodic beam model to a 1-D homogeneous beam model. The periodic beam model is homogenized into an equivalent homogeneous beam model using the additive property of compliance along the generic axis. The major departure from previous approaches in literature is using compliance instead of stiffness in homogenization. An obvious justification is that the stiffness is additive at each cross section but not along the generic axis. The homogenized model preserves many properties of the original periodic model.

'Stepping in' or 'stepping back': how first year nursing students begin to learn about person-centred care.

PubMed

Currie, Kay; Bannerman, Samantha; Howatson, Val; MacLeod, Fiona; Mayne, Wendy; Organ, Christine; Renton, Sarah; Scott, Janine

2015-01-01

The concept of person-centred care has gained international recognition over the last decade and forms one of the key concepts of our Nursing Quality Improvement Curricular Framework. This study aimed to investigate nursing students' learning about person-centred care during the first-year of their programme. Qualitative thematic analysis of a section of placement learning documents from two consecutive cohorts of students from all fields of nursing (n=405), supplemented by three focus group discussions. Two conceptual categories of student approaches to learning emerged. Firstly, 'stepping back', or learning from a distance about how nurses provide care, often through reading case notes and care plans; second, 'stepping in', learning about the patient as a person by direct interaction with service users. Evidence of reflection on the patient's experience of care was limited. These results have resonance with existing pedagogical theories around preferences for active or passive styles of learning. The potential for clinical mentors to build student confidence and encourage direct engagement with patients was highlighted. Students are aware of the concepts, principles and professional values of person-centred care from early in their programme; however, the majority tend to be preoccupied by learning about what nurses 'do', rather than 'how patients experience care'. Development towards a more person-centred approach may require targeted support from mentors to help students gain confidence and begin reflecting on how patients experience care. Copyright © 2014 Elsevier Ltd. All rights reserved.

First isolate of KPC-2-producing Klebsiella pneumonaie sequence type 23 from the Americas.

PubMed

Cejas, Daniela; Fernández Canigia, Liliana; Rincón Cruz, Giovanna; Elena, Alan X; Maldonado, Ivana; Gutkind, Gabriel O; Radice, Marcela A

2014-09-01

KPC-2-producing Klebsiella pneumoniae isolates mainly correspond to clonal complex 258 (CC258); however, we describe KPC-2-producing K. pneumoniae isolates belonging to invasive sequence type 23 (ST23). KPC-2 has scarcely been reported to occur in ST23, and this report describes the first isolation of this pathogen in the Americas. Acquisition of resistant markers in virulent clones could mark an evolutionary step toward the establishment of these clones as major nosocomial pathogens. Copyright © 2014, American Society for Microbiology. All Rights Reserved.

Development of a high-throughput screening system for identification of novel reagents regulating DNA damage in human dermal fibroblasts.

PubMed

Bae, Seunghee; An, In-Sook; An, Sungkwan

2015-09-01

Ultraviolet (UV) radiation is a major inducer of skin aging and accumulated exposure to UV radiation increases DNA damage in skin cells, including dermal fibroblasts. In the present study, we developed a novel DNA repair regulating material discovery (DREAM) system for the high-throughput screening and identification of putative materials regulating DNA repair in skin cells. First, we established a modified lentivirus expressing the luciferase and hypoxanthine phosphoribosyl transferase (HPRT) genes. Then, human dermal fibroblast WS-1 cells were infected with the modified lentivirus and selected with puromycin to establish cells that stably expressed luciferase and HPRT (DREAM-F cells). The first step in the DREAM protocol was a 96-well-based screening procedure, involving the analysis of cell viability and luciferase activity after pretreatment of DREAM-F cells with reagents of interest and post-treatment with UVB radiation, and vice versa. In the second step, we validated certain effective reagents identified in the first step by analyzing the cell cycle, evaluating cell death, and performing HPRT-DNA sequencing in DREAM-F cells treated with these reagents and UVB. This DREAM system is scalable and forms a time-saving high-throughput screening system for identifying novel anti-photoaging reagents regulating DNA damage in dermal fibroblasts.

Sensing cocaine in saliva with attenuated total reflection infrared (ATR-IR) spectroscopy combined with a one-step extraction method

NASA Astrophysics Data System (ADS)

Hans, Kerstin M.-C.; Gianella, Michele; Sigrist, Markus W.

2012-03-01

On-site drug tests have gained importance, e.g., for protecting the society from impaired drivers. Since today's drug tests are majorly only positive/negative, there is a great need for a reliable, portable and preferentially quantitative drug test. In the project IrSens we aim to bridge this gap with the development of an optical sensor platform based on infrared spectroscopy and focus on cocaine detection in saliva. We combine a one-step extraction method, a sample drying technique and infrared attenuated total reflection (ATR) spectroscopy. As a first step we have developed an extraction technique that allows us to extract cocaine from saliva to an almost infrared-transparent solvent and to record ATR spectra with a commercially available Fourier Transform-infrared spectrometer. To the best of our knowledge this is the first time that such a simple and easy-to-use one-step extraction method is used to transfer cocaine from saliva into an organic solvent and detect it quantitatively. With this new method we are able to reach a current limit of detection around 10 μg/ml. This new extraction method could also be applied to waste water monitoring and controlling caffeine content in beverages.

Use of proteomics for validation of the isolation process of clotting factor IX from human plasma.

PubMed

Clifton, James; Huang, Feilei; Gaso-Sokac, Dajana; Brilliant, Kate; Hixson, Douglas; Josic, Djuro

2010-01-03

The use of proteomic techniques in the monitoring of different production steps of plasma-derived clotting factor IX (pd F IX) was demonstrated. The first step, solid-phase extraction with a weak anion-exchange resin, fractionates the bulk of human serum albumin (HSA), immunoglobulin G, and other non-binding proteins from F IX. The proteins that strongly bind to the anion-exchange resin are eluted by higher salt concentrations. In the second step, anion-exchange chromatography, residual HSA, some proteases and other contaminating proteins are separated. In the last chromatographic step, affinity chromatography with immobilized heparin, the majority of the residual impurities are removed. However, some contaminating proteins still remain in the eluate from the affinity column. The next step in the production process, virus filtration, is also an efficient step for the removal of residual impurities, mainly high molecular weight proteins, such as vitronectin and inter-alpha inhibitor proteins. In each production step, the active component, pd F IX and contaminating proteins are monitored by biochemical and immunochemical methods and by LC-MS/MS and their removal documented. Our methodology is very helpful for further process optimization, rapid identification of target proteins with relatively low abundance, and for the design of subsequent steps for their removal or purification.

Proteomic study of activated Taenia solium oncospheres

PubMed Central

Santivañez, S.; Hernández-González, A.; Chile, N.; Oleaga, A.; Arana, Y.; Palma, S.; Verastegui, M.; Gonzalez, A.E.; Gilman, R.; Garcia, H.H.; Siles-Lucas, M.

2010-01-01

Taenia solium cysticerci are a major cause of human seizures and epilepsy in the world. In the gastrointestinal tract of infected individuals, taeniid eggs release the oncospheres, which are then activated by intestinal stimuli, getting ready to penetrate the gut wall and reach distant locations where they transform in cysticerci. Information about oncospheral molecules is scarce, and elucidation of the oncosphere proteome could help understanding the host-parasite relationship during the first steps of infection. In this study, using liquid chromatography and tandem mass spectrometry (LC-MS/MS) analysis, we could identify a set of oncospheral proteins involved in adhesion, protein folding, detoxification and proteolysis, among others. In addition, we have characterized one of the identified molecules, the parasite 14-3-3, by immunoblot and immunolocalization. The identification of these oncospheral proteins represents the first step to elucidate their specific roles in the biology of the host-parasite relationship. PMID:20144663

Monitoring the invasion of an exotic tree (Ligustrum lucidum) from 1983 to 2006 with Landsat TM/ETM+ satellite data and support vector machines in Cordoba, Argentina

Treesearch

Gregorio I. Gavier-Pizarro; Tobias Kuemmerle; Laura E. Hoyos; Susan I. Stewart; Cynthia D. Huebner; Nicholas S. Keuler; Volker C. Radeloff

2012-01-01

In central Argentina, the Chinese tree glossy privet (Ligustrum lucidum) is an aggressive invasive species replacing native forests, forming dense stands, and is thus a major conservation concern. Mapping the spread of biological invasions is a necessary first step toward understanding the factors determining invasion patterns. Urban areas may...

First S.T.E.P.: A Model for the Early Identification of Children with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Koegel, Lynn Kern; Koegel, Robert L.; Nefdt, Nicolette; Fredeen, Rosy; Klein, Eileen F.; Bruinsma, Yvonne E. M.

2005-01-01

Even though children with autism spectrum disorder (ASD) can be reliably identified by autism experts at 18 months, and the majority of parents report symptoms before age 2, the average age of diagnosis for children with autism in the United States is 3 to 4 years of age. Early identification is especially vital given the growing amount of…

Human depression: a new approach in quantitative psychiatry

PubMed Central

2010-01-01

The biomolecular approach to major depression disorder is explained by the different steps that involve cell membrane viscosity, Gsα protein and tubulin. For the first time it is hypothesised that a biomolecular pathway exists, moving from cell membrane viscosity through Gsα protein and Tubulin, which can condition the conscious state and is measurable by electroencephalogram study of the brain's γ wave synchrony. PMID:20525273

Independent Evaluation of California's Race to the Top: Early Learning Challenge Quality Rating and Improvement System. Half-Term Report

ERIC Educational Resources Information Center

Hawkinson, Laura E.; Quick, Heather E.; Muenchow, Susan; Anthony, Jennifer; Weinberg, Emily; Holod, Aleksandra; Parrish, Deborah; Meakin, John; Lee, Dong Hoon; Tarrant, Kate; Cannon, Jill S.; Zellman, Gail L.; Karoly, Lynn A.

2015-01-01

The first step in the Validity and Reliability Study summarizes the history and purpose of California's quality rating and improvement system (QRIS), reviews findings from other QRIS evaluation studies, and describes the approach to validating the system in California. The majority of this report focuses on providing context for the California…

Cost Effective Analysis of New Markets: First Steps of Enrollment Management for Nursing and Allied Health Programs. AIR 1997 Annual Forum Paper.

ERIC Educational Resources Information Center

Coyne, Thomas J.; Nordone, Ronald; Donovan, Joseph W.; Thygeson, William

This paper describes the initial analyses needed to help institutions of higher education plan majors in nursing and allied health as institutions look for new markets based on demographic and employment factors. Twelve variables were identified and weighted to describe an ideal recruitment market. Using a three-phase process, potential U.S.…

New insight of high temperature oxidation on self-exfoliation capability of graphene oxide.

PubMed

Liu, Yuhang; Zeng, Jie; Han, Di; Wu, Kai; Yu, Bowen; Chai, Songgang; Chen, Feng; Fu, Qiang

2018-05-04

The preparation of graphene oxide (GO) via Hummers method is usually divided into two steps: low temperature oxidation at 35 °C (step I oxidation) and high temperature oxidation at 98 °C (step II oxidation). However, the effects of these two steps on the exfoliation capability and chemical structure of graphite oxide remain unclear. In this study, both the functional group content of graphite oxide and the entire evolution of interlayer spacing were investigated during the two steps. Step I oxidation is a slowly inhomogeneous oxidation step to remove unoxidized graphite flakes. The prepared graphite oxide can be easily self-exfoliated but contains a lot of organic sulfur. During the first 20 min of step II oxidation, the majority of organic sulfur can be efficiently removed and graphite oxide still remains a good exfoliation capability due to sharp increasing of carboxyl groups. However, with a longer oxidation time at step II oxidation, the decrease of organic sulfur content is slowed down apparently but without any carboxyl groups forming, then graphite oxide finally loses self-exfoliation capability. It is concluded that a short time of step II oxidation can produce purer and ultralarge GO sheets via self-exfoliation. The pure GO is possessed with better thermal stability and liquid crystal behavior. Besides, reduced GO films prepared from step II oxidation show better mechanical and electric properties after reducing compared with that obtained only via step I oxidation.

New insight of high temperature oxidation on self-exfoliation capability of graphene oxide

NASA Astrophysics Data System (ADS)

Liu, Yuhang; Zeng, Jie; Han, Di; Wu, Kai; Yu, Bowen; Chai, Songgang; Chen, Feng; Fu, Qiang

2018-05-01

The preparation of graphene oxide (GO) via Hummers method is usually divided into two steps: low temperature oxidation at 35 °C (step I oxidation) and high temperature oxidation at 98 °C (step II oxidation). However, the effects of these two steps on the exfoliation capability and chemical structure of graphite oxide remain unclear. In this study, both the functional group content of graphite oxide and the entire evolution of interlayer spacing were investigated during the two steps. Step I oxidation is a slowly inhomogeneous oxidation step to remove unoxidized graphite flakes. The prepared graphite oxide can be easily self-exfoliated but contains a lot of organic sulfur. During the first 20 min of step II oxidation, the majority of organic sulfur can be efficiently removed and graphite oxide still remains a good exfoliation capability due to sharp increasing of carboxyl groups. However, with a longer oxidation time at step II oxidation, the decrease of organic sulfur content is slowed down apparently but without any carboxyl groups forming, then graphite oxide finally loses self-exfoliation capability. It is concluded that a short time of step II oxidation can produce purer and ultralarge GO sheets via self-exfoliation. The pure GO is possessed with better thermal stability and liquid crystal behavior. Besides, reduced GO films prepared from step II oxidation show better mechanical and electric properties after reducing compared with that obtained only via step I oxidation.

Recovery of actinides from actinide-aluminium alloys by chlorination: Part III - Chlorination with HCl(g)

NASA Astrophysics Data System (ADS)

Meier, Roland; Souček, Pavel; Walter, Olaf; Malmbeck, Rikard; Rodrigues, Alcide; Glatz, Jean-Paul; Fanghänel, Thomas

2018-01-01

Two steps of a pyrochemical route for the recovery of actinides from spent metallic nuclear fuel are being investigated at JRC-Karlsruhe. The first step consists in electrorefining the fuel in molten salt medium implying aluminium cathodes. The second step is a chlorination process for the separation of actinides (An) from An-Al alloys formed on the cathodes. The chlorination process, in turn, consists of three steps; the distillation of adhered salt (1), the chlorination of An-Al by HCl/Cl2 under formation of AlCl3 and An chlorides (2), and the subsequent sublimation of AlCl3 (3). In the present work UAl2, UAl3, NpAl2, and PuAl2 were chlorinated with HCl(g) in a temperature range between 300 and 400 °C forming UCl4, NpCl4 or PuCl3 as the major An containing phases, respectively. Thermodynamic calculations were carried out to support the experimental work. The results showed a high chlorination efficiency for all used starting materials and indicated that the sublimation step may not be necessary when using HCl(g).

Method of treating alkali metal sulfide and carbonate mixtures

DOEpatents

Kohl, Arthur L.; Rennick, Robert D.; Savinsky, Martin W.

1978-01-01

A method of removing and preferably recovering sulfur values from an alkali metal sulfide and carbonate mixture comprising the steps of (1) introducing the mixture in an aqueous medium into a first carbonation zone and reacting the mixture with a gas containing a major amount of CO.sub.2 and a minor amount of H.sub.2 S; (2) introducing the resultant product from step 1 into a stripping zone maintained at subatmospheric pressure, and contacting this product with steam to produce a gaseous mixture, comprising H.sub.2 S and water vapor, and a liquor of reduced sulfide content; (3) introducing the liquor of reduced sulfide content into a second carbonation zone, and reacting the liquor with substantially pure gaseous CO.sub.2 in an amount sufficient to precipitate bicarbonate crystals and produce an offgas containing CO.sub.2 and H.sub.2 S for use in step 1; (4) recovering the bicarbonate crystals from step 3, and thermally decomposing the crystals to produce an alkaline metal carbonate product and a substantially pure CO.sub.2 offgas for use in step 3.

Defense Intelligence: Additional Steps Could Better Integrate Intelligence Input into DODs Acquisition of Major Weapon Systems

DTIC Science & Technology

2016-11-01

DEFENSE INTELLIGENCE Additional Steps Could Better Integrate Intelligence Input into DOD’s Acquisition of Major Weapon...States Government Accountability Office Highlights of GAO-17-10, a report to congressional committees November 2016 DEFENSE INTELLIGENCE ...Additional Steps Could Better Integrate Intelligence Input into DOD’s Acquisition of Major Weapon Systems What GAO Found The Department of Defense (DOD

KSC-05PD-1783

NASA Technical Reports Server (NTRS)

2005-01-01

KENNEDY SPACE CENTER, FLA. Workers in the Payload Hazardous Servicing Facility stand by as the first half of the fairing (left) is moved closer to the Mars Reconnaissance Orbiter (right) for installation. The fairing protects the spacecraft during launch and flight through the atmosphere. Once in space, it is jettisoned. Launch of the MRO aboard an Atlas V rocket will be from Launch Complex 41 at Cape Canaveral Air Force Station in Florida. The MRO is the next major step in Mars exploration and scheduled for launch from Cape Canaveral Air Force Station in a window opening Aug. 10. The MRO is an important next step in fulfilling NASAs vision of space exploration and ultimately sending human explorers to Mars and beyond.

Tumor image signatures and habitats: a processing pipeline of multimodality metabolic and physiological images.

PubMed

You, Daekeun; Kim, Michelle M; Aryal, Madhava P; Parmar, Hemant; Piert, Morand; Lawrence, Theodore S; Cao, Yue

2018-01-01

To create tumor "habitats" from the "signatures" discovered from multimodality metabolic and physiological images, we developed a framework of a processing pipeline. The processing pipeline consists of six major steps: (1) creating superpixels as a spatial unit in a tumor volume; (2) forming a data matrix [Formula: see text] containing all multimodality image parameters at superpixels; (3) forming and clustering a covariance or correlation matrix [Formula: see text] of the image parameters to discover major image "signatures;" (4) clustering the superpixels and organizing the parameter order of the [Formula: see text] matrix according to the one found in step 3; (5) creating "habitats" in the image space from the superpixels associated with the "signatures;" and (6) pooling and clustering a matrix consisting of correlation coefficients of each pair of image parameters from all patients to discover subgroup patterns of the tumors. The pipeline was applied to a dataset of multimodality images in glioblastoma (GBM) first, which consisted of 10 image parameters. Three major image "signatures" were identified. The three major "habitats" plus their overlaps were created. To test generalizability of the processing pipeline, a second image dataset from GBM, acquired on the scanners different from the first one, was processed. Also, to demonstrate the clinical association of image-defined "signatures" and "habitats," the patterns of recurrence of the patients were analyzed together with image parameters acquired prechemoradiation therapy. An association of the recurrence patterns with image-defined "signatures" and "habitats" was revealed. These image-defined "signatures" and "habitats" can be used to guide stereotactic tissue biopsy for genetic and mutation status analysis and to analyze for prediction of treatment outcomes, e.g., patterns of failure.

Catechol-O-Methyltransferase and UDP-Glucuronosyltransferases in the Metabolism of Baicalein in Different Species.

PubMed

Zhang, Ruiya; Cui, Yonglei; Wang, Yan; Tian, Xiangge; Zheng, Lu; Cong, HaiJian; Wu, Bin; Huo, Xiaokui; Wang, Chao; Zhang, BaoJing; Wang, Xiaobo; Yu, Zhonghui

2017-12-01

Baicalein is the major bioactive flavonoid in some herb medicines and dietary plants; however, the detailed metabolism pathway of its major metabolite oroxylin A-7-O-β-D-glucuronide in human was not clear. It was important to illustrate the major metabolic enzymes that participate in its elimination for the clinic use of baicalein. We first revealed a two-step metabolism profile for baicalein and illustrated the combination of catechol-O-methyltransferase (COMT) and uridine diphosphate-glucuronosyltransferases (UGTs) in drug metabolism, further evaluated its bioactivity variation during drug metabolism. The metabolism profiles were systematically characterized in different human biology preparations; after then, the anti-inflammatory activities of metabolites were evaluated in LPS-induced RAW264.7 cell. The first-step metabolite of baicalein was isolated and identified as oroxylin A; soluble-bound COMT (S-COMT) was the major enzyme responsible for its biotransformation. Specially, position 108 mutation of S-COMT significantly decreases the elimination. Meantime, oroxylin A was rapidly metabolized by UGTs, UGT1A1, -1A3, -1A6, -1A7, -1A8, -1A9, and -1A10 which were involved in the glucuronidation. Considerable species differences were observed with 1060-fold K m (3.05 ± 1.86-3234 ± 475 μM) and 330-fold CL int (5.93-1973 μL/min/mg) variations for baicalein metabolism. Finally, the middle metabolite oroxylin A exhibited a potent anti-inflammatory activity with the IC 50 value of 28 μM. The detailed kinetic parameters indicated that COMT provide convenience for the next glucuronidation; monkey would be a preferred animal model for the preclinical investigation of baicalein. Importantly, oroxylin A should be reconsidered in evaluating baicalein efficacy against inflammatory diseases.

Oil rigs and offshore sport fishing in Louisiana

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dugas, R.; Guillory, V.; Fischer, M.

Forty years ago, offshore sport fishing in Louisiana was almost nonexistent. Offshore oil drilling platforms are the primary cause of the present increase in sport fishing in this area. Algae and other organisms forming the first step in the food chain cluster around the subsurface structures of the rigs, attracting fish that seek food and shelter. Major game species frequenting these rigs are identified. (3 photos, 22 references, 2 tables)

Synthesis of Hydrophobic, Crosslinkable Resins.

DTIC Science & Technology

1985-12-01

product by methanol precipitation the majority of the first oligomer was L-"- lost. 4.14 DIFFERENTIAL SCANNING CALORIMETRY. The DSC trace of a typical...polymer from the DSC traces obtained to dcte. Preliminary studies using an automated torsional pendulum indicate that the Tg of the crosslinked polymer is...enabling water to be used in the purification steps. The diethyl phosphonates are readily prepared by heating triethyl phosphite with the chloromethyl

A resolution honoring Congresswoman Geraldine A. Ferraro, the first woman selected by a major political party as its candidate for Vice President of the United States, and extending the condolences of the Senate on her death.

THOMAS, 112th Congress

Sen. Gillibrand, Kirsten E. [D-NY

2011-03-29

Senate - 03/29/2011 Submitted in the Senate, considered, and agreed to without amendment and with a preamble by Unanimous Consent. (All Actions) Tracker: This bill has the status Agreed to in SenateHere are the steps for Status of Legislation:

Thermal degradation of polybrominated diphenyl ethers over as-prepared Fe3O4 micro/nano-material and hypothesized mechanism.

PubMed

Li, Qianqian; Yang, Fan; Su, Guijin; Huang, Linyan; Lu, Huijie; Zhao, Yuyang; Zheng, Minghui

2016-01-01

The thermal degradation of decabromodiphenyl ether (BDE-209) featuring fully substituted bromines was investigated over an as-prepared Fe3O4 micro/nano-material at 300 °C. Degradation followed pseudo-first-order kinetics with kobs = 0.15 min(-1) higher than that for decachlorobiphenyl (CB-209). Twenty-six newly produced polybrominated diphenyl ether (PBDE) congeners were identified using the available PBDE standards, while four PBDE congener products were predicted using third-order polynomial regression equation. Analysis of the products indicated that BDE-209 underwent stepwise hydrodebromination over as-prepared Fe3O4. Similar to the case for CB-209, two initial hydrodebromination steps are favored at the BDE-209 meta-positions, giving the major products BDE-207 and BDE-197. However, the variance about the preferred products began to emerge from the start of heptabromodiphenyl ethers (hepta-BDEs). The majorly produced hepta-BDE isomer with BDE-183 is unbrominated at one ortho-position. However, this is different from the reported degradation of CB-209, which always produced the products chlorinated at all four ortho-positions until the ortho-position had to be removed for the formation of trichlorobiphenyls and dichlorobiphenyl still majorly chlorinated at three or two ortho-positions. The early BDE-209 hydrodebromination steps appear to be strongly influenced by steric effects, whereas subsequent hydrodebromination steps, as more bromine atoms are removed, will be gradually governed more by thermodynamics.

Estimating continuous floodplain and major river bed topography mixing ordinal coutour lines and topographic points

NASA Astrophysics Data System (ADS)

Bailly, J. S.; Dartevelle, M.; Delenne, C.; Rousseau, A.

2017-12-01

Floodplain and major river bed topography govern many river biophysical processes during floods. Despite the grow of direct topographic measurements from LiDARS on riverine systems, it still room to develop methods for large (e.g. deltas) or very local (e.g. ponds) riverine systems that take advantage of information coming from simple SAR or optical image processing on floodplain, resulting from waterbodies delineation during flood up or down, and producing ordered coutour lines. The next challenge is thus to exploit such data in order to estimate continuous topography on the floodplain combining heterogeneous data: a topographic points dataset and a located but unknown and ordered contourline dataset. This article is comparing two methods designed to estimate continuous topography on the floodplain mixing ordinal coutour lines and continuous topographic points. For both methods a first estimation step is to value each contourline with elevation and a second step is next to estimate the continuous field from both topographic points and valued contourlines. The first proposed method is a stochastic method starting from multigaussian random-fields and conditional simualtion. The second is a deterministic method based on radial spline fonction for thin layers used for approximated bivariate surface construction. Results are first shown and discussed from a set of synoptic case studies presenting various topographic points density and topographic smoothness. Next, results are shown and discuss on an actual case study in the Montagua laguna, located in the north of Valparaiso, Chile.

Estimating continuous floodplain and major river bed topography mixing ordinal coutour lines and topographic points

NASA Astrophysics Data System (ADS)

Brown, T. G.; Lespez, L.; Sear, D. A.; Houben, P.; Klimek, K.

2016-12-01

Floodplain and major river bed topography govern many river biophysical processes during floods. Despite the grow of direct topographic measurements from LiDARS on riverine systems, it still room to develop methods for large (e.g. deltas) or very local (e.g. ponds) riverine systems that take advantage of information coming from simple SAR or optical image processing on floodplain, resulting from waterbodies delineation during flood up or down, and producing ordered coutour lines. The next challenge is thus to exploit such data in order to estimate continuous topography on the floodplain combining heterogeneous data: a topographic points dataset and a located but unknown and ordered contourline dataset. This article is comparing two methods designed to estimate continuous topography on the floodplain mixing ordinal coutour lines and continuous topographic points. For both methods a first estimation step is to value each contourline with elevation and a second step is next to estimate the continuous field from both topographic points and valued contourlines. The first proposed method is a stochastic method starting from multigaussian random-fields and conditional simualtion. The second is a deterministic method based on radial spline fonction for thin layers used for approximated bivariate surface construction. Results are first shown and discussed from a set of synoptic case studies presenting various topographic points density and topographic smoothness. Next, results are shown and discuss on an actual case study in the Montagua laguna, located in the north of Valparaiso, Chile.

Biochemistry of methyl-coenzyme M reductase: the nickel metalloenzyme that catalyzes the final step in synthesis and the first step in anaerobic oxidation of the greenhouse gas methane.

PubMed

Ragsdale, Stephen W

2014-01-01

Methane, the major component of natural gas, has been in use in human civilization since ancient times as a source of fuel and light. Methanogens are responsible for synthesis of most of the methane found on Earth. The enzyme responsible for catalyzing the chemical step of methanogenesis is methyl-coenzyme M reductase (MCR), a nickel enzyme that contains a tetrapyrrole cofactor called coenzyme F430, which can traverse the Ni(I), (II), and (III) oxidation states. MCR and methanogens are also involved in anaerobic methane oxidation. This review describes structural, kinetic, and computational studies aimed at elucidating the mechanism of MCR. Such studies are expected to impact the many ramifications of methane in our society and environment, including energy production and greenhouse gas warming.

A kinetic study of xanthohumol cyclization to isoxanthohumol - A role of water

NASA Astrophysics Data System (ADS)

Kamiński, Daniel M.; Gawęda, Karolina; Arczewska, Marta; Senczyna, Bogusław; Gagoś, Mariusz

2017-07-01

Xanthohumol, a major prenylated chalcone found in hop resin, has recently attracted scientific interest due to its health-promoting properties. In the present work, we investigated the mechanism of xanthohumol cyclization to isoxanthohumol in an aqueous solution with a high pH by means of UV-Vis spectroscopy and liquid chromatography. The results were modeled by DFT methods with the SMD solvation model. The results of theoretical calculations were consistent with experimental data. The proposed mechanism comprises two stages, where the first step involves cyclization of xanthohumol ions and the second step involves the addition of H+ ion from a water molecule to an isoxanthohumol ion. The second step is responsible for the stabilization of isoxanthohumol. Based on these results some practical information can be drawn, which may be important from the point of view of the problem xanthohumol stability in commercial dietary supplements.

CDC Kerala 1: Organization of clinical child development services (1987-2013).

PubMed

Nair, M K C; George, Babu; Nair, G S Harikumaran; Bhaskaran, Deepa; Leena, M L; Russell, Paul Swamidhas Sudhakar

2014-12-01

The main objective of establishing the Child Development Centre (CDC), Kerala for piloting comprehensive child adolescent development program in India, has been to understand the conceptualization, design and scaling up of a pro-active positive child development initiative, easily replicable all over India. The process of establishing the Child Development Centre (CDC) Kerala for research, clinical services, training and community extension services over the last 25 y, has been as follows; Step 1: Conceptualization--The life cycle approach to child development; Step 2: Research basis--CDC model early stimulation is effective; Step 3: Development and validation of seven simple developmental screening tools; Step 4: CDC Diagnostic services--Ultrasonology and genetic, and metabolic laboratory; Step 5: Developing seven intervention packages; Step 6: Training--Post graduate diploma in clinical child development; Step 7: CDC Clinic Services--seven major ones; Step 8: CDC Community Services--Child development referral units; Step 9: Community service delivery models--Childhood disability and for adolescent care counselling projects; Step 10: National capacity building--Four child development related courses. CDC Kerala follow-up and clinic services are offered till 18 y of age and premarital counselling till 24 y of age as shown in "CDC Kerala Clinic Services Flow Chart" and 74,291 children have availed CDC clinic services in the last 10 y. CDC Kerala is the first model for comprehensive child adolescent development services using a lifecycle approach in the Government sector and hence declared as the collaborative centre for Rashtriya Bal Swasthya Karyakram (RBSK), in Kerala.

[Human dignity as a key notion in the UNESCO declaration on the human genome].

PubMed

Andorno, R

2001-01-01

The notion of human dignity plays an increasing role in the bioethical discussion. The UNESCO Universal Declaration on the Human Genome and Human Rights is the best example of this phenomenon. This instrument is the first important step to establish international standards with regard to the ethical and legal problems raised by genetic advances. Nevertheless, the major work is still pending. First, because the concept of dignity requires a better characterization with reference to the new bioethical dilemmas. Second, because the principles enunciated at the international level should be concretized locally through well-crafted national law.

The Arabian Cradle: Mitochondrial Relicts of the First Steps along the Southern Route out of Africa

PubMed Central

Fernandes, Verónica; Alshamali, Farida; Alves, Marco; Costa, Marta D.; Pereira, Joana B.; Silva, Nuno M.; Cherni, Lotfi; Harich, Nourdin; Cerny, Viktor; Soares, Pedro; Richards, Martin B.; Pereira, Luísa

2012-01-01

A major unanswered question regarding the dispersal of modern humans around the world concerns the geographical site of the first human steps outside of Africa. The “southern coastal route” model predicts that the early stages of the dispersal took place when people crossed the Red Sea to southern Arabia, but genetic evidence has hitherto been tenuous. We have addressed this question by analyzing the three minor west-Eurasian haplogroups, N1, N2, and X. These lineages branch directly from the first non-African founder node, the root of haplogroup N, and coalesce to the time of the first successful movement of modern humans out of Africa, ∼60 thousand years (ka) ago. We sequenced complete mtDNA genomes from 85 Southwest Asian samples carrying these haplogroups and compared them with a database of 300 European examples. The results show that these minor haplogroups have a relict distribution that suggests an ancient ancestry within the Arabian Peninsula, and they most likely spread from the Gulf Oasis region toward the Near East and Europe during the pluvial period 55–24 ka ago. This pattern suggests that Arabia was indeed the first staging post in the spread of modern humans around the world. PMID:22284828

Clinical outcomes of a stepped care program for borderline personality disorder.

PubMed

Laporte, Lise; Paris, Joel; Bergevin, Tanya; Fraser, Ronald; Cardin, Jean-François

2018-04-30

This study examines the clinical outcomes of two clinics for borderline personality disorder (BPD) in a naturalistic setting, offering a stepped care model with both short-term (ST) treatment lasting 12 weeks and extended care (EC) up to 24 months. A total of 479 patients attending the ST clinic and 145 attending the EC clinic were assessed on depression, impulsivity, self-esteem, emotion dysregulation, substance abuse, self-harm and suicidality. There were significant reductions in all symptoms in both clinics with the exception that substance abuse was only reduced in the EC clinic. On all symptoms, no significant differences in magnitude of changes were observed between patients who stayed in EC clinic for 6-12 months in comparison to those who stayed for 18-24 months. These results support the concept that for the majority of patients with BPD, brief treatment can be effective. While some patients still need longer treatment, the results are encouraging for brief treatment as a first step for the majority of patients with BPD. While this study adds to the weight of evidence to support ST interventions for patients with BPD, further research using a control group is needed. Copyright © 2018 John Wiley & Sons, Ltd. Copyright © 2018 John Wiley & Sons, Ltd.

The Constitutionality of the K-12 Funding System in Illinois, Volume I: Legal Issues. MacArthur/Spencer Series Number 3.

ERIC Educational Resources Information Center

Franklin, David L.; And Others

This is volume I of a two-volume study of the constitutionality of the K-12 funding system in Illinois. In this volume, seven steps are presented in the issues and outcomes of the major judicial challenges to systems of state aid to public schools. The first chapter looks at the history of state aid litigation up to the time California became the…

Impact of user influence on information multi-step communication in a micro-blog

NASA Astrophysics Data System (ADS)

Wu, Yue; Hu, Yong; He, Xiao-Hai; Deng, Ken

2014-06-01

User influence is generally considered as one of the most critical factors that affect information cascading spreading. Based on this common assumption, this paper proposes a theoretical model to examine user influence on the information multi-step communication in a micro-blog. The multi-steps of information communication are divided into first-step and non-first-step, and user influence is classified into five dimensions. Actual data from the Sina micro-blog is collected to construct the model by means of an approach based on structural equations that uses the Partial Least Squares (PLS) technique. Our experimental results indicate that the dimensions of the number of fans and their authority significantly impact the information of first-step communication. Leader rank has a positive impact on both first-step and non-first-step communication. Moreover, global centrality and weight of friends are positively related to the information non-first-step communication, but authority is found to have much less relation to it.

Effect of two-step and one-step surface conditioning of glass ceramic on adhesion strength of orthodontic bracket and effect of thermo-cycling on adhesion strength.

PubMed

Asiry, Moshabab A; AlShahrani, Ibrahim; Alaqeel, Samer M; Durgesh, Bangalore H; Ramakrishnaiah, Ravikumar

2018-08-01

The adhesion strength of orthodontic brackets bonded to dental glass ceramics was evaluated after ceramic surface was treated with two-step and one-step surface conditioning systems, and subjecting to thermo-cycling. A total of forty specimens were fabricated from silica based glass ceramic (lithium disilicate) by duplicating the buccal surface of maxillary first premolar. The specimens were randomly assigned to two experimental groups (n = 20), group one specimens were treated with two-step surface conditioning system (IPS ceramic etching gel™ and Monobond plus™) and group two specimens were treated with one-step surface conditioning system (Monobond etch and prime™). The surface roughness of the specimens after treatment with two-step and one-step surface conditioning system was measured using non-contact surface profilometer. Ten randomly selected specimens from each group were subjected to thermo-cycling and the remaining ten served as baseline. The shear bond strength of the specimens was measured using universal material testing machine. The adhesive remnant index score was calculated, and the results of surface roughness and bond strength were tabulated and subjected to analysis of variance and post hoc tukey's test at a significance level of p < 0.05. The results of the study showed that the specimens treated with two-step conditioning system had higher surface roughness and bond strength than one-step conditioning system. The majority of the specimens treated with both two-step and one-step conditioned specimens showed adhesive failure after subjecting thermo-cycling. Traditional two-step conditioning provides better bond strength. The clinical importance of the study is that, the silane promoted adhesion significantly reduces on exposure to thermo-cycling. Copyright © 2018 Elsevier Ltd. All rights reserved.

KSC-05PD-1784

NASA Technical Reports Server (NTRS)

2005-01-01

KENNEDY SPACE CENTER, FLA. Workers in the Payload Hazardous Servicing Facility make adjustments as they get ready to move the second half of the fairing (right) and install it with the first half around the Mars Reconnaissance Orbiter. The fairing protects the spacecraft during launch and flight through the atmosphere. Once in space, it is jettisoned. Launch of the MRO aboard an Atlas V rocket will be from Launch Complex 41 at Cape Canaveral Air Force Station in Florida. The MRO is the next major step in Mars exploration and scheduled for launch from Cape Canaveral Air Force Station in a window opening Aug. 10. The MRO is an important next step in fulfilling NASAs vision of space exploration and ultimately sending human explorers to Mars and beyond.

Progress in palliative care in Israel: comparative mapping and next steps

PubMed Central

2012-01-01

Palliative care was established rapidly in some countries, while in other countries its establishment has taken a different trajectory. This paper identifies core steps in developing a medical specialty and examines those taken by Israel as compared with the US and England for palliative care. It considers the next steps Israel may take. Palliative care aims to provide quality of life for those with serious illnesses by attending to the illness-prompted physical, mental, social, and spiritual needs of patients and their families. It has ancient roots in medicine; its modern iteration began against the backdrop of new cures and life-sustaining technology which challenged conceptions of how to respect the sanctity of life. The first modern hospice was created by Saunders; it provided proof that palliative care works, and this has occurred in Israel as well (the first step). Another key step is usually skills development among clinicians; in Israel, few education and training opportunities exist so far. Specialty recognition also has not yet occurred in Israel. Service development remains limited and a major shortage of services exists, compared to the US. Research capacity in Israel is also limited. Policy to develop and sustain palliative care in Israel is underway; in 2009, the Ministry of Health established policy for implementing palliative care. However, it still lacks a financially viable infrastructure. We conclude that palliative care in Israel is emerging but has far to go. Adequate resource allocation, educational guidelines, credentialed manpower and specialty leadership are the key factors that palliative care development in Israel needs. PMID:22913773

Survey by the European Board and College of Obstetrics and Gynaecology on screening for gestational diabetes in Europe.

PubMed

Benhalima, Katrien; Mathieu, Chantal; Van Assche, André; Damm, Peter; Devlieger, Roland; Mahmood, Tahir; Dunne, Fidelma

2016-06-01

More uniformity is necessary in screening and diagnosis for gestational diabetes (GDM) across Europe. The European Board and College of Obstetrics and Gynaecology (EBCOG) has recently recommended to use the 2013 World Health Organization (WHO) criteria for the diagnosis of GDM. We evaluated the uptake of these EBCOG recommendations in guidelines for GDM screening across Europe. Between September and November 2015, an online survey on the current national or regional recommendations for GDM screening was directed to the 33 European countries that are members of EBCOG. There was a response rate of 84.8% (28 countries). From Belgium, data were separately obtained from the Dutch-and the French-speaking parts and from the UK data were also obtained from Scotland, leading to data from 30 responders. The response rates were high in Central Europe (100%), Northern Europe (100%) and Southern Europe (85.7%) with lower response rates in Eastern Europe (71.4%). 82.1% of guidelines recommend screening for unknown diabetes at first prenatal visit and 67.9% recommend to screen for GDM before 24 weeks of pregnancy. All guidelines recommend to screen for GDM ≥24 weeks, based on risk factors in 64.3% and by universal screening in 35.7%. The most commonly used diagnostic criteria for GDM are the 2013 WHO criteria in 67.9%, the 1999 WHO criteria in 10.7%, the European Association for the Study of Diabetes criteria in 7.1% and the Carpenter & Coustan criteria in 7.1%. Of all societies advising the use of the 2013 WHO criteria, 52.6% recommends this based on risk factors, 10.5% recommends universal screening in a two-step strategy and 36.8% recommends a universal one-step approach with a 75g OGTT. Our survey shows that the majority of European societies now advise to use the 2013 WHO criteria for GDM. However, only 36.8% recommends a universal one-step approach with a 75g OGTT with the majority of societies recommending screening based on risk factors. The use of common diagnostic criteria for GDM by the majority of societies is an important first step towards achieving uniformity in GDM screening across Europe. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

ERTS-1, a new window on our planet

USGS Publications Warehouse

Williams, Richard S.; Carter, William Douglas

1976-01-01

The launch, on July 23, 1972, of the first Earth Resources Technology Satellite (ERTS-1) by the National Aeronautics and Space Administration was a major step forward in extending man 's ability to inventory the Earth 's resources and to evaluate objectively his impact upon the environment. ERTS spacecraft represent the first step in merging space and remote-sensing technologies into a system for inventorying and managing the Earth 's resources. Examples presented in this book demonstrate ERTS ' vast potential for inventorying resources, monitoring environmental conditions, and measuring changes. Such information is essential for the full evaluation of the Federal lands and determining their future use, as well as for improved planning of overall land use throughout the United States and the world. Ten bureaus of the U.S. Department of Interior have roles in the ERTS project. Nearly all of these participating bureaus are represented in almost 100 papers included in this book. Chapter 3 is entitled ' Applications to Water Resources ' and contains 23 separate sections. (Woodard-USGS)

Characterization of pulsed flow attenuation on a regulated montane river

NASA Astrophysics Data System (ADS)

Fong, C. S.; Yarnell, S. M.; Fleenor, W. E.; Viers, J. H.

2013-12-01

A major benefit of hydropower is its ability to respond quickly to fluctuating electrical loads. However, the sharp changes in discharge caused by this practice have detrimental environmental effects downstream. This study investigated the effects of hydrograph shape on attenuation of regulated pulsed flow events by first categorizing, then modeling the downstream movement of representative pulses on the upper Tuolumne River below Holm Powerhouse in the Sierra Nevada mountains of California. This system was managed by a public utility and produced flow pulses primarily for hydroelectricity generation and/or whitewater recreation. Operations were highly influenced by a system-wide "Water First" policy, which prioritized drinking water supply and quality over other beneficial uses. Pulses were therefore associated with a spectrum of time scales, from predetermined schedules decided far in advance to hydropeaking operations responding to real-time demands. We extracted underlying hydrograph shape patterns using principal component analysis on individual pulsed flow events released from 1988-2012 (n=4439). From principal component loadings, six shape categories were determined: rectangular, front-step, back-step, goalpost, centered tower, and other. The rectangular and stepped shapes were the most frequent, composing 62% and 24% of total events, respectively. The rectangular shape was often produced by 'standard' hydropeaking or recreational releases, while the stepped shapes were often used for water conservation or were recreational flows bordered by periods of electricity generation. The stepped shape increased in occurrence after the "Water First" policy took effect in 1993 and dominated two drier years (2007 and 2009). After categorization by shape, magnitude and durational indices were used to fabricate representative pulsed flow events. Attenuation of these representative pulses was then modeled using a 1D hydraulic model of 42 river km prepared in HEC-RAS. As no operational measures or physical structures existed within the system to counter the adverse effects of pulsed flow events, natural attenuation was the only potential major mitigation agent. However, model results demonstrated a clear durational threshold for representative pulses (~ 3-5 hrs) over which the degree of attenuation of ramping rates and peak discharge approached a limit. These thresholds were unique to the study reach and were dependent upon river morphology, bed characteristics, and flow rates. Increasing baseflows did not necessarily increase attenuation of pulses, most likely due to minimal increases in bed friction forces in this fairly steep and confined channel. Simulations of front and back-step representative pulses showed trade-offs between attenuation of peak magnitudes and steepness of ramping rates. Finally, a range of rising ramping rates were shown to steepen downstream above initial rates due to the study reach's channel morphology. Reshaping pulses to be more ecologically benign at all points downstream was infeasible if the system was required to maintain current electricity production and recreational service levels.

40 CFR 93.104 - Frequency of conformity determinations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... in the project's design concept and scope; three years elapse since the most recent major step to.... Major steps include NEPA process completion; start of final design; acquisition of a significant portion...

Expanding the Range of the First Step to Success Intervention: Tertiary-Level Support for Children, Teachers, and Families

ERIC Educational Resources Information Center

Frey, Andy J.; Small, Jason W.; Lee, Jon; Walker, Hill M.; Seeley, John R.; Feil, Edward G.; Golly, Annemeike

2015-01-01

This study presents the findings of a quasi-experimental feasibility study examining the Tertiary First Step intervention, an enhanced version of the First Step to Success early intervention program. Tertiary FirstStep was developed to engage families more effectively and influence and improve parenting practices for children having challenging…

Expanding the Range of the First Step to Success Intervention: Tertiary-Level Support for Children, Teachers, and Families

ERIC Educational Resources Information Center

Frey, Andy J.; Small, Jason W.; Lee, Jon; Walker, Hill M.; Seeley, John R.; Feil, Edward G.; Golly, Annemeike

2015-01-01

This study presents the findings of a quasi-experimental feasibility study examining the Tertiary First Step intervention, an enhanced version of the First Step to Success early intervention program. Tertiary First Step was developed to engage families more effectively and influence and improve parenting practices for children having challenging…

On the Possibility of Ill-Conditioned Covariance Matrices in the First-Order Two-Step Estimator

NASA Technical Reports Server (NTRS)

Garrison, James L.; Axelrod, Penina; Kasdin, N. Jeremy

1997-01-01

The first-order two-step nonlinear estimator, when applied to a problem of orbital navigation, is found to occasionally produce first step covariance matrices with very low eigenvalues at certain trajectory points. This anomaly is the result of the linear approximation to the first step covariance propagation. The study of this anomaly begins with expressing the propagation of the first and second step covariance matrices in terms of a single matrix. This matrix is shown to have a rank equal to the difference between the number of first step states and the number of second step states. Furthermore, under some simplifying assumptions, it is found that the basis of the column space of this matrix remains fixed once the filter has removed the large initial state error. A test matrix containing the basis of this column space and the partial derivative matrix relating first and second step states is derived. This square test matrix, which has dimensions equal to the number of first step states, numerically drops rank at the same locations that the first step covariance does. It is formulated in terms of a set of constant vectors (the basis) and a matrix which can be computed from a reference trajectory (the partial derivative matrix). A simple example problem involving dynamics which are described by two states and a range measurement illustrate the cause of this anomaly and the application of the aforementioned numerical test in more detail.

First Data Release of the ESO-ARO Public Survey SAMPLING—SMT “All-sky” Mapping of Planck Interstellar Nebulae in the Galaxy

NASA Astrophysics Data System (ADS)

Wang, Ke; Zahorecz, Sarolta; Cunningham, Maria R.; Tóth, L. Viktor; Liu, Tie; Lu, Xing; Wang, Yuan; Cosentino, Giuliana; Sung, Ren-Shiang; Sokolov, Vlas; Wang, Shen; Wang, Yuwei; Zhang, Zhiyu; Li, Di; Kim, Kee-Tae; Tatematsu, Ken’ichi; Testi, Leonardo; Wu, Yuefang; Yang, Ji; SAMPLING Collaboration

2018-01-01

We make the first data release (DR1) of the ongoing ESO Public Survey SAMPLING (http://dx.doi.org/10.7910/DVN/0L8NHX). DR1 comprises of 124 fields distributed in $70^\\circ < l < 216^\\circ$, $-35^\\circ < b < 25^\\circ$. The 12CO and 13CO (2-1) cubes are gridded in $8"$ pixels, with an effective resolution of $36"$. The channel width is 0.33 km/s and the RMS noise is $T_{\\rm mb}<0.2$ K. Once completed, SAMPLING and complementary surveys will initiate the first major step forward to characterize molecular clouds and star formation on truly Galactic scales.

An Approach for Stitching Satellite Images in a Bigdata Mapreduce Framework

NASA Astrophysics Data System (ADS)

Sarı, H.; Eken, S.; Sayar, A.

2017-11-01

In this study we present a two-step map/reduce framework to stitch satellite mosaic images. The proposed system enable recognition and extraction of objects whose parts falling in separate satellite mosaic images. However this is a time and resource consuming process. The major aim of the study is improving the performance of the image stitching processes by utilizing big data framework. To realize this, we first convert the images into bitmaps (first mapper) and then String formats in the forms of 255s and 0s (second mapper), and finally, find the best possible matching position of the images by a reduce function.

Personal stories of growing up sexually.

PubMed

Beausang, C C

2000-01-01

Prevention of problems related to sexuality during adolescence continues to be a major public health challenge. Describing childhood perceptions of sexuality is an important step in understanding sexual issues during adolescence. However, there is a paucity of information about sexuality in early life. Therefore, the purpose of this study was to describe recurrent themes in personal stories of growing up sexually. A thematic analysis with a narrative perspective was applied using the method described by Miles and Huberman (1994). Four interrelated themes pervaded the stories: parents as teachers, sex is secret, learning by experience, and first intercourse as a turning point. These findings have major implications for sexual health education and counseling in addition to further research.

Cyanide Degradation under Alkaline Conditions by a Strain of Fusarium solani Isolated from Contaminated Soils

PubMed Central

Dumestre, A.; Chone, T.; Portal, J.; Gerard, M.; Berthelin, J.

1997-01-01

Several cyanide-tolerant microorganisms have been selected from alkaline wastes and soils contaminated with cyanide. Among them, a fungus identified as Fusarium solani IHEM 8026 shows a good potential for cyanide biodegradation under alkaline conditions (pH 9.2 to 10.7). Results of K(sup14)CN biodegradation studies show that fungal metabolism seems to proceed by a two-step hydrolytic mechanism: (i) the first reaction involves the conversion of cyanide to formamide by a cyanide-hydrolyzing enzyme, cyanide hydratase (EC 4.2.1.66); and (ii) the second reaction consists of the conversion of formamide to formate, which is associated with fungal growth. No growth occurred during the first step of cyanide degradation, suggesting that cyanide is toxic to some degree even in cyanide-degrading microorganisms, such as F. solani. The presence of organic nutrients in the medium has a major influence on the occurrence of the second step. Addition of small amounts of yeast extract led to fungal growth, whereas no growth was observed in media containing cyanide as the sole source of carbon and nitrogen. The simple hydrolytic detoxification pathway identified in the present study could be used for the treatment of many industrial alkaline effluents and wastes containing free cyanide without a prior acidification step, thus limiting the risk of cyanhydric acid volatilization; this should be of great interest from an environmental and health point of view. PMID:16535647

Web vulnerability study of online pharmacy sites.

PubMed

Kuzma, Joanne

2011-01-01

Consumers are increasingly using online pharmacies, but these sites may not provide an adequate level of security with the consumers' personal data. There is a gap in this research addressing the problems of security vulnerabilities in this industry. The objective is to identify the level of web application security vulnerabilities in online pharmacies and the common types of flaws, thus expanding on prior studies. Technical, managerial and legal recommendations on how to mitigate security issues are presented. The proposed four-step method first consists of choosing an online testing tool. The next steps involve choosing a list of 60 online pharmacy sites to test, and then running the software analysis to compile a list of flaws. Finally, an in-depth analysis is performed on the types of web application vulnerabilities. The majority of sites had serious vulnerabilities, with the majority of flaws being cross-site scripting or old versions of software that have not been updated. A method is proposed for the securing of web pharmacy sites, using a multi-phased approach of technical and managerial techniques together with a thorough understanding of national legal requirements for securing systems.

Cough Hypersensitivity Syndrome: A Few More Steps Forward

PubMed Central

Song, Woo-Jung

2017-01-01

Cough reflex is a vital protective mechanism against aspiration, but when dysregulated, it can become hypersensitive. In fact, chronic cough is a significant medical problem with a high degree of morbidity. Recently, a unifying paradigm of cough hypersensitivity syndrome has been proposed. It represents a clinical entity in which chronic cough is a major presenting problem, regardless of the underlying condition. Although it remains a theoretical construct, emerging evidence suggests that aberrant neurophysiology is the common etiology of this syndrome. Recent success in randomized clinical trials using a P2X3 receptor antagonist is the first major advance in the therapeutics of cough in the past 30 years; it at last provides a strategy for treating intractable cough as well as an invaluable tool for dissecting the mechanism underpinning cough hypersensitivity. Additionally, several cough measurement tools have been validated for use and will help assess the clinical relevance of cough in various underlying conditions. Along with this paradigm shift, our understanding of cough mechanisms has improved during the past decades, allowing us to continue to take more steps forward in the future. PMID:28677352

Multi-objective design optimization of antenna structures using sequential domain patching with automated patch size determination

NASA Astrophysics Data System (ADS)

Koziel, Slawomir; Bekasiewicz, Adrian

2018-02-01

In this article, a simple yet efficient and reliable technique for fully automated multi-objective design optimization of antenna structures using sequential domain patching (SDP) is discussed. The optimization procedure according to SDP is a two-step process: (i) obtaining the initial set of Pareto-optimal designs representing the best possible trade-offs between considered conflicting objectives, and (ii) Pareto set refinement for yielding the optimal designs at the high-fidelity electromagnetic (EM) simulation model level. For the sake of computational efficiency, the first step is realized at the level of a low-fidelity (coarse-discretization) EM model by sequential construction and relocation of small design space segments (patches) in order to create a path connecting the extreme Pareto front designs obtained beforehand. The second stage involves response correction techniques and local response surface approximation models constructed by reusing EM simulation data acquired in the first step. A major contribution of this work is an automated procedure for determining the patch dimensions. It allows for appropriate selection of the number of patches for each geometry variable so as to ensure reliability of the optimization process while maintaining its low cost. The importance of this procedure is demonstrated by comparing it with uniform patch dimensions.

Effect of data quality on a hybrid Coulomb/STEP model for earthquake forecasting

NASA Astrophysics Data System (ADS)

Steacy, Sandy; Jimenez, Abigail; Gerstenberger, Matt; Christophersen, Annemarie

2014-05-01

Operational earthquake forecasting is rapidly becoming a 'hot topic' as civil protection authorities seek quantitative information on likely near future earthquake distributions during seismic crises. At present, most of the models in public domain are statistical and use information about past and present seismicity as well as b-value and Omori's law to forecast future rates. A limited number of researchers, however, are developing hybrid models which add spatial constraints from Coulomb stress modeling to existing statistical approaches. Steacy et al. (2013), for instance, recently tested a model that combines Coulomb stress patterns with the STEP (short-term earthquake probability) approach against seismicity observed during the 2010-2012 Canterbury earthquake sequence. They found that the new model performed at least as well as, and often better than, STEP when tested against retrospective data but that STEP was generally better in pseudo-prospective tests that involved data actually available within the first 10 days of each event of interest. They suggested that the major reason for this discrepancy was uncertainty in the slip models and, in particular, in the geometries of the faults involved in each complex major event. Here we test this hypothesis by developing a number of retrospective forecasts for the Landers earthquake using hypothetical slip distributions developed by Steacy et al. (2004) to investigate the sensitivity of Coulomb stress models to fault geometry and earthquake slip. Specifically, we consider slip models based on the NEIC location, the CMT solution, surface rupture, and published inversions and find significant variation in the relative performance of the models depending upon the input data.

Load forecasting via suboptimal seasonal autoregressive models and iteratively reweighted least squares estimation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mbamalu, G.A.N.; El-Hawary, M.E.

The authors propose suboptimal least squares or IRWLS procedures for estimating the parameters of a seasonal multiplicative AR model encountered during power system load forecasting. The proposed method involves using an interactive computer environment to estimate the parameters of a seasonal multiplicative AR process. The method comprises five major computational steps. The first determines the order of the seasonal multiplicative AR process, and the second uses the least squares or the IRWLS to estimate the optimal nonseasonal AR model parameters. In the third step one obtains the intermediate series by back forecast, which is followed by using the least squaresmore » or the IRWLS to estimate the optimal season AR parameters. The final step uses the estimated parameters to forecast future load. The method is applied to predict the Nova Scotia Power Corporation's 168 lead time hourly load. The results obtained are documented and compared with results based on the Box and Jenkins method.« less

Melt Conditioning of Light Metals by Application of High Shear for Improved Microstructure and Defect Control

NASA Astrophysics Data System (ADS)

Patel, Jayesh B.; Yang, Xinliang; Mendis, Chamini L.; Fan, Zhongyun

2017-04-01

Casting is the first step toward the production of majority of metal products whether the final processing step is casting or other thermomechanical processes such as extrusion or forging. The high shear melt conditioning provides an easily adopted pathway to producing castings with a more uniform fine-grained microstructure along with a more uniform distribution of the chemical composition leading to fewer defects as a result of reduced shrinkage porosities and the presence of large oxide films through the microstructure. The effectiveness of high shear melt conditioning in improving the microstructure of processes used in industry illustrates the versatility of the high shear melt conditioning technology. The application of high shear process to direct chill and twin roll casting process is demonstrated with examples from magnesium melts.

Microvascular Decompression for Trigeminal Neuralgia: Technical Refinement for Complication Avoidance.

PubMed

Tomasello, Francesco; Esposito, Felice; Abbritti, Rosaria V; Angileri, Filippo F; Conti, Alfredo; Cardali, Salvatore M; La Torre, Domenico

2016-10-01

Microvascular decompression (MVD) represents the most effective and safe surgical option for the treatment of trigeminal neuralgia since it was first popularized by Jannetta 50 years ago. Despite several advances, complications such as cerebellar and vascular injury, hearing loss, muscular atrophy, cerebrospinal fluid (CSF) leak, postoperative cutaneous pain, and sensory disturbances still occur and may negatively affect the outcome. We propose some technical nuances of the surgical procedure that were used in our recent series. We used a novel hockey stick-shaped retromastoid skin incision, preserving the major nerves of the occipital and temporal areas. Microsurgical steps were performed without the use of retractors. CSF leakage was prevented with a watertight dural closure and multilayer osteodural reconstruction. The refined surgical steps were perfected in the last consecutive 15 cases of our series. In these cases we did not record any cutaneous pain, sensory disturbances, or CSF leakage. The average diameter of the craniectomy was 18 mm. No patient reported major complications related to the intradural microsurgical maneuvers. In all cases the neurovascular conflict was found and solved with a good outcome in terms of pain disappearance. Our minimally invasive approach was demonstrated to guarantee an optimal exposure of the cerebellopontine angle and minimize the rate of complications related to skin incision and muscular dissection, microsurgical steps, and closure. Copyright © 2016 Elsevier Inc. All rights reserved.

Building Roof Segmentation from Aerial Images Using a Line-and Region-Based Watershed Segmentation Technique

PubMed Central

Merabet, Youssef El; Meurie, Cyril; Ruichek, Yassine; Sbihi, Abderrahmane; Touahni, Raja

2015-01-01

In this paper, we present a novel strategy for roof segmentation from aerial images (orthophotoplans) based on the cooperation of edge- and region-based segmentation methods. The proposed strategy is composed of three major steps. The first one, called the pre-processing step, consists of simplifying the acquired image with an appropriate couple of invariant and gradient, optimized for the application, in order to limit illumination changes (shadows, brightness, etc.) affecting the images. The second step is composed of two main parallel treatments: on the one hand, the simplified image is segmented by watershed regions. Even if the first segmentation of this step provides good results in general, the image is often over-segmented. To alleviate this problem, an efficient region merging strategy adapted to the orthophotoplan particularities, with a 2D modeling of roof ridges technique, is applied. On the other hand, the simplified image is segmented by watershed lines. The third step consists of integrating both watershed segmentation strategies into a single cooperative segmentation scheme in order to achieve satisfactory segmentation results. Tests have been performed on orthophotoplans containing 100 roofs with varying complexity, and the results are evaluated with the VINETcriterion using ground-truth image segmentation. A comparison with five popular segmentation techniques of the literature demonstrates the effectiveness and the reliability of the proposed approach. Indeed, we obtain a good segmentation rate of 96% with the proposed method compared to 87.5% with statistical region merging (SRM), 84% with mean shift, 82% with color structure code (CSC), 80% with efficient graph-based segmentation algorithm (EGBIS) and 71% with JSEG. PMID:25648706

The Best Aircraft for Close Air Support in the Twenty First Century

DTIC Science & Technology

2016-09-01

movement of those forces.”8 In addition to CAS, the Air Force em - ploys its aircraft to perform a myriad of roles during combat operations, such as offen...distance to bombing ranges, and so forth.14 Once these figures are accumulated for each major com- mand’s fleet, the second step is developing a CPFH...the GBU-39 small diameter bomb and the AGM-176 Griffin missile, it is still in operational test and development.26 The new squadron (replacement

The Observing Time Distribution in Major Groundbased Observatories - a Complex Task

NASA Astrophysics Data System (ADS)

Breysacher, J.

The aim of the present paper is to give, first, a brief description of the different steps related to the general procedure of telescope time allocation at the European Southern Observatory, and then, a detailed review of the various constraints one has to take into account when preparing the final observing schedule on the various telescopes installed at La Silla. A succinct discussion will be given of how, in the future, remote control observing may facilitate the coordination of multiwavelength investigations.

How MAG4 Improves Space Weather Forecasting

NASA Technical Reports Server (NTRS)

Falconer, David; Khazanov, Igor; Barghouty, Nasser

2013-01-01

Dangerous space weather is driven by solar flares and Coronal Mass Ejection (CMEs). Forecasting flares and CMEs is the first step to forecasting either dangerous space weather or All Clear. MAG4 (Magnetogram Forecast), developed originally for NASA/SRAG (Space Radiation Analysis Group), is an automated program that analyzes magnetograms from the HMI (Helioseismic and Magnetic Imager) instrument on NASA SDO (Solar Dynamics Observatory), and automatically converts the rate (or probability) of major flares (M- and X-class), Coronal Mass Ejections (CMEs), and Solar Energetic Particle Events.

Electrical impedance imaging in two-phase, gas-liquid flows: 1. Initial investigation

NASA Technical Reports Server (NTRS)

Lin, J. T.; Ovacik, L.; Jones, O. C.

1991-01-01

The determination of interfacial area density in two-phase, gas-liquid flows is one of the major elements impeding significant development of predictive tools based on the two-fluid model. Currently, these models require coupling of liquid and vapor at interfaces using constitutive equations which do not exist in any but the most rudimentary form. Work described herein represents the first step towards the development of Electrical Impedance Computed Tomography (EICT) for nonintrusive determination of interfacial structure and evolution in such flows.

49 CFR 40.251 - What are the first steps in an alcohol confirmation test?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false What are the first steps in an alcohol... What are the first steps in an alcohol confirmation test? As the BAT for an alcohol confirmation test, you must follow these steps to begin the confirmation test process: (a) You must carry out a...

The pedagogical value of Disassemble/Analyze/Assemble (DAA) activities: Assessing the potential for motivation and transfer

NASA Astrophysics Data System (ADS)

Dalrymple, Odesma Onika

Undergraduate engineering institutions are currently seeking to improve recruiting practices and to retain engineering majors particularly by addressing what many studies document as a major challenge of poor instruction. There is an undisputed need for instructional practices that motivate students in addition to facilitating the transfer of learning beyond the classroom. Reverse engineering and product dissection, more broadly termed Disassemble/Analyze/Assemble (DAA) activities, have shown potential to address these concerns, based on the reviews of students and professors alike. DAA activities involve the systematic deconstruction of an artifact, the subsequent analysis and possible reconstruction of its components for the purpose of understanding the embodied fundamental concepts, design principles and developmental processes. These activities have been part of regular industry practice for some time; however, the systematic analysis of their benefits for learning and instruction is a relatively recent phenomenon. A number of studies have provided highly descriptive accounts of curricula and possible outcomes of DAA activities; but, relatively few have compared participants doing DAA activities to a control group doing more traditional activities. In this respect, two quasi-experiments were conducted as part of a first-year engineering laboratory, and it was hypothesized that students who engaged in the DAA activity would be more motivated and would demonstrate higher frequencies of transfer than the control. A DAA activity that required students to disassemble a single-use camera and analyze its components to discover how it works was compared to a step-by-step laboratory activity in the first experiment and a lecture method of instruction in the second experiment. In both experiments, over forty percent of the students that engaged in the DAA activity demonstrated the ability to transfer the knowledge gained about the functions of the camera's components and their interconnectedness and describe an approach for modifying the camera that involved the adaptation of a current mechanism to add new functionality. This exhibition of transfer was significantly greater than the frequency of transfer yielded by the comparative traditional activities. In addition, the post laboratory surveys indicated that the DAA activities elicited significantly higher levels of motivation than the step-by-step laboratory and the direct instructional method.

Development of a hydro kinetic river turbine with simulation and operational measurement results in comparison

NASA Astrophysics Data System (ADS)

Ruopp, A.; Ruprecht, A.; Riedelbauch, S.; Arnaud, G.; Hamad, I.

2014-03-01

The development of a hydro-kinetic prototype was shown including the compound structure, guide vanes, runner blades and a draft tube section with a steeply sloping, short spoiler. The design process of the hydrodynamic layout was split into three major steps. First the compound and the draft tube section was designed and the best operating point was identified using porous media as replacement for the guide vane and runner section (step one). The best operating point and the volume flux as well as the pressure drop was identified and used for the design of the guide vane section and the runner section. Both were designed and simulated independently (step two). In step three, all parts were merged in stationary simulation runs detecting peak power and operational bandwidth. In addition, the full scale demonstrator was installed in August 2010 and measured in the St. Lawrence River in Quebec supporting the average inflow velocity using ADCP (Acoustic Doppler Current Profiler) and the generator power output over the variable rotational speed. Simulation data and measurements are in good agreement. Thus, the presented approach is a suitable way in designing a hydro kinetic turbine.

ATP-sulfurylase, sulfur-compounds, and plant stress tolerance

PubMed Central

Anjum, Naser A.; Gill, Ritu; Kaushik, Manjeri; Hasanuzzaman, Mirza; Pereira, Eduarda; Ahmad, Iqbal; Tuteja, Narendra; Gill, Sarvajeet S.

2015-01-01

Sulfur (S) stands fourth in the list of major plant nutrients after N, P, and K. Sulfate (SO42-), a form of soil-S taken up by plant roots is metabolically inert. As the first committed step of S-assimilation, ATP-sulfurylase (ATP-S) catalyzes SO42--activation and yields activated high-energy compound adenosine-5′-phosphosulfate that is reduced to sulfide (S2-) and incorporated into cysteine (Cys). In turn, Cys acts as a precursor or donor of reduced S for a range of S-compounds such as methionine (Met), glutathione (GSH), homo-GSH (h-GSH), and phytochelatins (PCs). Among S-compounds, GSH, h-GSH, and PCs are known for their involvement in plant tolerance to varied abiotic stresses, Cys is a major component of GSH, h-GSH, and PCs; whereas, several key stress-metabolites such as ethylene, are controlled by Met through its first metabolite S-adenosylmethionine. With the major aim of briefly highlighting S-compound-mediated role of ATP-S in plant stress tolerance, this paper: (a) overviews ATP-S structure/chemistry and occurrence, (b) appraises recent literature available on ATP-S roles and regulations, and underlying mechanisms in plant abiotic and biotic stress tolerance, (c) summarizes ATP-S-intrinsic regulation by major S-compounds, and (d) highlights major open-questions in the present context. Future research in the current direction can be devised based on the discussion outcomes. PMID:25904923

Experimental study of electrochemical fluorination of trichloroethylene

NASA Technical Reports Server (NTRS)

Polisena, C.; Liu, C. C.; Savinell, R. F.

1982-01-01

The electrochemical fluorination of trichloroethylene in anhydrous hydrogen fluoride at 0 C and at constant cell potential was investigated. A microprocessor-aided electrochemical fluorination reactor system that yields highly reproducible results was utilized. The following major two-carbon-chain products were observed: CHCl2-CCl2F, CHCl2-CClF2, CHClF-CCl2F, and CCl2F-CClF2. The first step in the reaction sequence was determined to be fluorine addition to the double bond, followed by replacement of first hydrogen and then chlorine by fluorine. Polymerization reactions yielded higher molecular weight or possible ring-type chlorofluorohydrocarbons. A comparison of the reaction products of electrochemical and chemical fluorinations of trichloroethylene is also discussed.

WWC Review of the Report “Assessing the Effectiveness of First Step to Success: Are Short-Term Results the First Step to Long-Term Behavioral Improvements.” What Works Clearinghouse Single Study Review

ERIC Educational Resources Information Center

What Works Clearinghouse, 2013

2013-01-01

The study reported in this paper examined the effects of “First Step to Success (First Step),” a school- and home-based program intended to improve outcomes for students with moderate to severe behavior problems who may be at risk for academic failure. The study took place in six locations across five states: San Jose, California; Tampa, Florida;…

5 CFR 534.203 - Maximum stipends.

Code of Federal Regulations, 2010 CFR

2010-01-01

... (minus 3 steps). L-9 First year postgraduate (Ph. D.) GS-11-1 (minus 3 steps). L-9 First year medical or dental residency GS-11-1 (minus 3 steps). L-10 Second year postdoctoral (Ph. D.) GS-12-1 (minus 3 steps...

45 CFR 16.7 - The first steps in the appeal process: The notice of appeal and the Board's response.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false The first steps in the appeal process: The notice... SERVICES GENERAL ADMINISTRATION PROCEDURES OF THE DEPARTMENTAL GRANT APPEALS BOARD § 16.7 The first steps... of these procedures, and advise the appellant of the next steps. The Board will also send a copy of...

Space station crew safety: Human factors interaction model

NASA Technical Reports Server (NTRS)

Cohen, M. M.; Junge, M. K.

1985-01-01

A model of the various human factors issues and interactions that might affect crew safety is developed. The first step addressed systematically the central question: How is this space station different from all other spacecraft? A wide range of possible issue was identified and researched. Five major topics of human factors issues that interacted with crew safety resulted: Protocols, Critical Habitability, Work Related Issues, Crew Incapacitation and Personal Choice. Second, an interaction model was developed that would show some degree of cause and effect between objective environmental or operational conditions and the creation of potential safety hazards. The intermediary steps between these two extremes of causality were the effects on human performance and the results of degraded performance. The model contains three milestones: stressor, human performance (degraded) and safety hazard threshold. Between these milestones are two countermeasure intervention points. The first opportunity for intervention is the countermeasure against stress. If this countermeasure fails, performance degrades. The second opportunity for intervention is the countermeasure against error. If this second countermeasure fails, the threshold of a potential safety hazard may be crossed.

Ebola virus host cell entry.

PubMed

Sakurai, Yasuteru

2015-01-01

Ebola virus is an enveloped virus with filamentous structure and causes a severe hemorrhagic fever in human and nonhuman primates. Host cell entry is the first essential step in the viral life cycle, which has been extensively studied as one of the therapeutic targets. A virus factor of cell entry is a surface glycoprotein (GP), which is an only essential viral protein in the step, as well as the unique particle structure. The virus also interacts with a lot of host factors to successfully enter host cells. Ebola virus at first binds to cell surface proteins and internalizes into cells, followed by trafficking through endosomal vesicles to intracellular acidic compartments. There, host proteases process GPs, which can interact with an intracellular receptor. Then, under an appropriate circumstance, viral and endosomal membranes are fused, which is enhanced by major structural changes of GPs, to complete host cell entry. Recently the basic research of Ebola virus infection mechanism has markedly progressed, largely contributed by identification of host factors and detailed structural analyses of GPs. This article highlights the mechanism of Ebola virus host cell entry, including recent findings.

CHANGING OUR DIAGNOSTIC PARADIGM: MOVEMENT SYSTEM DIAGNOSTIC CLASSIFICATION

PubMed Central

Kamonseki, Danilo H.; Staker, Justin L.; Lawrence, Rebekah L.; Braman, Jonathan P.

2017-01-01

Proper diagnosis is a first step in applying best available treatments, and prognosticating outcomes for clients. Currently, the majority of musculoskeletal diagnoses are classified according to pathoanatomy. However, the majority of physical therapy treatments are applied toward movement system impairments or pain. While advocated within the physical therapy profession for over thirty years, diagnostic classification within a movement system framework has not been uniformly developed or adopted. We propose a basic framework and rationale for application of a movement system diagnostic classification for atraumatic shoulder pain conditions, as a case for the broader development of movement system diagnostic labels. Shifting our diagnostic paradigm has potential to enhance communication, improve educational efficiency, facilitate research, directly link to function, improve clinical care, and accelerate preventive interventions. PMID:29158950

The effect of a novel minimally invasive strategy for infected necrotizing pancreatitis.

PubMed

Tong, Zhihui; Shen, Xiao; Ke, Lu; Li, Gang; Zhou, Jing; Pan, Yiyuan; Li, Baiqiang; Yang, Dongliang; Li, Weiqin; Li, Jieshou

2017-11-01

Step-up approach consisting of multiple minimally invasive techniques has gradually become the mainstream for managing infected pancreatic necrosis (IPN). In the present study, we aimed to compare the safety and efficacy of a novel four-step approach and the conventional approach in managing IPN. According to the treatment strategy, consecutive patients fulfilling the inclusion criteria were put into two time intervals to conduct a before-and-after comparison: the conventional group (2010-2011) and the novel four-step group (2012-2013). The conventional group was essentially open necrosectomy for any patient who failed percutaneous drainage of infected necrosis. And the novel drainage approach consisted of four different steps including percutaneous drainage, negative pressure irrigation, endoscopic necrosectomy and open necrosectomy in sequence. The primary endpoint was major complications (new-onset organ failure, sepsis or local complications, etc.). Secondary endpoints included mortality during hospitalization, need of emergency surgery, duration of organ failure and sepsis, etc. Of the 229 recruited patients, 92 were treated with the conventional approach and the remaining 137 were managed with the novel four-step approach. New-onset major complications occurred in 72 patients (78.3%) in the two-step group and 75 patients (54.7%) in the four-step group (p < 0.001). For other important endpoints, although there was no statistical difference in mortality between the two groups (p = 0.403), significantly fewer patients in the four-step group required emergency surgery when compared with the conventional group [14.6% (20/137) vs. 45.6% (42/92), p < 0.001]. In addition, stratified analysis revealed that the four-step approach group presented significantly lower incidence of new-onset organ failure and other major complications in patients with the most severe type of AP. Comparing with the conventional approach, the novel four-step approach significantly reduced the rate of new-onset major complications and requirement of emergency operations in treating IPN, especially in those with the most severe type of acute pancreatitis.

A VTVH MCD and EPR Spectroscopic Study of the Maturation of the "Second" Nitrogenase P-Cluster.

PubMed

Rupnik, Kresimir; Lee, Chi Chung; Hu, Yilin; Ribbe, Markus W; Hales, Brian J

2018-04-16

The P-cluster of the nitrogenase MoFe protein is a [ Fe 8 S 7 ] cluster that mediates efficient transfer of electrons to the active site for substrate reduction. Arguably the most complex homometallic FeS cluster found in nature, the biosynthetic mechanism of the P-cluster is of considerable theoretical and synthetic interest to chemists and biochemists alike. Previous studies have revealed a biphasic assembly mechanism of the two P-clusters in the MoFe protein upon incubation with Fe protein and ATP, in which the first P-cluster is formed through fast fusion of a pair of [ Fe 4 S 4 ] + clusters within 5 min and the second P-cluster is formed through slow fusion of the second pair of [ Fe 4 S 4 ] + clusters in a period of 2 h. Here we report a VTVH MCD and EPR spectroscopic study of the biosynthesis of the slow-forming, second P-cluster within the MoFe protein. Our results show that the first major step in the formation of the second P-cluster is the conversion of one of the precursor [ Fe 4 S 4 ] + clusters into the integer spin cluster [ Fe 4 S 3-4 ] α , a process aided by the assembly protein NifZ, whereas the second major biosynthetic step appears to be the formation of a diamagnetic cluster with a possible structure of [ Fe 8 S 7-8 ] β , which is eventually converted into the P-cluster.

Changes in temperature and precipitation extremes in western central Africa, Guinea Conakry, and Zimbabwe, 1955-2006

NASA Astrophysics Data System (ADS)

Aguilar, E.; Aziz Barry, A.; Brunet, M.; Ekang, L.; Fernandes, A.; Massoukina, M.; Mbah, J.; Mhanda, A.; Do Nascimento, D. J.; Peterson, T. C.; Thamba Umba, O.; Tomou, M.; Zhang, X.

2009-01-01

Understanding how extremes are changing globally, regionally, and locally is an important first step for planning appropriate adaptation measures, as changes in extremes have major impacts. The Intergovernmental Panel on Climate Change's synthesis of global extremes was not able to say anything about western central Africa, as no analysis of the region was available nor was there an adequate internationally exchanged long-term daily data set available to use for analysis of extremes. This paper presents the first analysis of extremes in this climatically important region along with analysis of Guinea Conakry and Zimbabwe. As per many other parts of the world, the analysis shows a decrease in cold extremes and an increase in warm extremes. However, while the majority of the analyzed world has shown an increase in heavy precipitation over the last half century, central Africa showed a decrease. Furthermore, the companion analysis of Guinea Conakry and Zimbabwe showed no significant increases.

Undergraduate Social Support and Career Networking as a Result of Membership in the University of Arizona Astronomy Club

NASA Astrophysics Data System (ADS)

Towner, Allison P.; Hardegree-Ullman, K.; Walker-LaFollette, A.; McGraw, A. M.; Robertson, A.; Smith, C.; Biddle, L. I.; Turner, J.

2013-06-01

Membership in formal or informal groups of students with similar interests provides many benefits to undergraduate astronomy majors at the University of Arizona. First and foremost, members benefit from peer social and academic support within the major. These benefits are both tangible and intangible: students form friendships with like-minded peers, which can sustain them through difficult periods of study, but these social networks are the basis of later professional networks as well. Students in the U of A Astronomy Club have received both informal and formal research positions at other institutions as a direct result of the support, peer mentoring, and connections of club members, and at least six also hold paid, non-research positions within the department as a result of their connection to the club. Finally, most Astronomy Club members take their first steps into professional astronomy, such as attendance at a AAS Meeting, as a result of Club membership and the encouragement of older club members.

The predictive validity of the MCAT exam in relation to academic performance through medical school: a national cohort study of 2001-2004 matriculants.

PubMed

Dunleavy, Dana M; Kroopnick, Marc H; Dowd, Keith W; Searcy, Cynthia A; Zhao, Xiaohui

2013-05-01

Most research examining the predictive validity of the Medical College Admission Test (MCAT) has focused on the relationship between MCAT scores and scores on the United States Medical Licensing Examination Step exams. This study examined whether MCAT scores predict students' unimpeded progress toward graduation (UP), which the authors defined as not withdrawing or being dismissed for academic reasons, graduating within five years of matriculation, and passing the Step 1, Step 2 Clinical Knowledge, and Step 2 Clinical Skills exams on the first attempt. Students who matriculated during 2001-2004 at 119 U.S. medical schools were included in the analyses. Logistic regression analyses were used to estimate the relationships between UP and MCAT total scores alone, undergraduate grade point averages (UGPAs) alone, and UGPAs and MCAT total scores together. All analyses were conducted at the school level and were considered together to evaluate relationships across schools. The majority of matriculants experienced UP. Together, UGPAs and MCAT total scores predicted UP well. MCAT total scores alone were a better predictor than UGPAs alone. Relationships were similar across schools; however, there was more variability across schools in the relationship between UP and UGPAs than between UP and MCAT total scores. The combination of UGPAs and MCAT total scores performs well as a predictor of UP. Both UGPAs and MCAT total scores are strong predictors of academic performance in medical school through graduation, not just the first two years. Further, these relationships generalize across medical schools.

[Results from ten years newborn hearing screening in a secondary hospital].

PubMed

Sequi Canet, José Miguel; Sala Langa, Maria José; Collar Del Castillo, José Ignacio

2016-10-01

A critical analysis is performed on the results of a newborn hearing screening program in a regional hospital. Screening results from 14,247 newborns in our maternity ward from 2002 to 2013. Two step recordings of bilateral otoacoustic emissions (initial and repeat, if failed, at about one month of life). Assessment by clinical brainstem responses. The first step was performed on 14,015 newborns (98.3% of the total) reaching the screening objective. The first step pass figures were 93.7%, which implies a good pass rate with a few patients to repeat. The second step is also good because it has a pass rate of 88.9% of newborns examined (only 0.63% of initial group needed brainstem responses assessment), but 10.6% were lost to follow up, and that is a major problem. In newborns, scheduled for brainstem responses, the loss to follow-up is worse, with a figure of 29.5%, despite the high accuracy of this test given that 69.4% of those assessed showed hearing loss. This figure represents a 0.31% of the initial group, and is a similar to that published for congenital hearing loss. Including patients that were lost to follow up this figure could be greater. Newborn hearing screening is useful but needs stronger control to avoid the follow up loss. In order to achieve this, it is crucial to have a good database and a screening coordinator. Copyright © 2015 Asociación Española de Pediatría. Publicado por Elsevier España, S.L.U. All rights reserved.

Space Commercialization Trends and Consequences for the Workforce

NASA Astrophysics Data System (ADS)

Peeters, W.

2002-01-01

The major trend we are currently witnessing in space activities is an increasing level of commercialization. This trend is emphasized by: consolidation, mergers and forming strategic alliances. In USA, from the 20 major space companies in the 80's only 3 `prime' ones were left by 1997. A similar effect took place in Europe in the 90's, where at present only primarily 2 major space conglomerates are operating at prime contractor level. Such strategic alliances in the first place result in the creation of end-to-end capabilities, with larger internal R&D and broader access to technologies. Due to the bigger financial volume of such conglomerates there is also better access to new capital and sharing of risks. In a second step, we can at present observe the creation of transatlantic alliances to enter the worldwide market. These trends have a considerable effect on the workforce requirements in industry:

Enantioselective catalysis of photochemical reactions.

PubMed

Brimioulle, Richard; Lenhart, Dominik; Maturi, Mark M; Bach, Thorsten

2015-03-23

The nature of the excited state renders the development of chiral catalysts for enantioselective photochemical reactions a considerable challenge. The absorption of a 400 nm photon corresponds to an energy uptake of approximately 300 kJ mol(-1) . Given the large distance to the ground state, innovative concepts are required to open reaction pathways that selectively lead to a single enantiomer of the desired product. This Review outlines the two major concepts of homogenously catalyzed enantioselective processes. The first part deals with chiral photocatalysts, which intervene in the photochemical key step and induce an asymmetric induction in this step. In the second part, reactions are presented in which the photochemical excitation is mediated by an achiral photocatalyst and the transfer of chirality is ensured by a second chiral catalyst (dual catalysis). © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Solar Project Development Pathway & Resources

EPA Pesticide Factsheets

The Local Government Solar Project Portal's Solar Project Development Pathway and Resources page details the major steps along the project development pathway and each step includes resources and tools to assist you with that step.

Treatment of urological complications in more than 1,000 kidney transplantations: the role of interventional radiology.

PubMed

Fonio, Paolo; Appendino, Elena; Calandri, Marco; Faletti, Riccardo; Righi, Dorico; Gandini, Giovanni

2015-02-01

The aim of this study is to evaluate the efficacy and safety of interventional radiology procedures in the treatment of major urological complications after kidney transplantation. Between 2000 and 2010, 1,146 kidney transplants were performed at our institution. A total of 146 major complications occurred, including 77 obstructions, 36 leaks and 33 associated perigraft fluid collections. Percutaneous treatment was carried out in 118/146 complications in 91 patients. In the case of stenosis-obstruction and fistulas (104 complications), the first therapeutic step was placement of a nephrostomy catheter, followed by balloon ureteroplasty, placement of external-internal catheters and double-J stents; 14/33 collections were drained under ultrasound guidance. In all 118 percutaneous interventions, we were able to place a nephrostomy or drainage catheter, with a technical success rate of 100 %. The long-term success rate was 49.6 %: in 57/115 (three patients were lost to follow-up) we obtained the complete resolution of the complication. The procedure-related mortality rate was 0 %. There was only one major complication and the rate of minor complications was 14.4 %. Interventional radiology is the first choice option in the treatment of urological complications after kidney transplantation.

Data sensitivity in a hybrid STEP/Coulomb model for aftershock forecasting

NASA Astrophysics Data System (ADS)

Steacy, S.; Jimenez Lloret, A.; Gerstenberger, M.

2014-12-01

Operational earthquake forecasting is rapidly becoming a 'hot topic' as civil protection authorities seek quantitative information on likely near future earthquake distributions during seismic crises. At present, most of the models in public domain are statistical and use information about past and present seismicity as well as b-value and Omori's law to forecast future rates. A limited number of researchers, however, are developing hybrid models which add spatial constraints from Coulomb stress modeling to existing statistical approaches. Steacy et al. (2013), for instance, recently tested a model that combines Coulomb stress patterns with the STEP (short-term earthquake probability) approach against seismicity observed during the 2010-2012 Canterbury earthquake sequence. They found that the new model performed at least as well as, and often better than, STEP when tested against retrospective data but that STEP was generally better in pseudo-prospective tests that involved data actually available within the first 10 days of each event of interest. They suggested that the major reason for this discrepancy was uncertainty in the slip models and, in particular, in the geometries of the faults involved in each complex major event. Here we test this hypothesis by developing a number of retrospective forecasts for the Landers earthquake using hypothetical slip distributions developed by Steacy et al. (2004) to investigate the sensitivity of Coulomb stress models to fault geometry and earthquake slip, and we also examine how the choice of receiver plane geometry affects the results. We find that the results are strongly sensitive to the slip models and moderately sensitive to the choice of receiver orientation. We further find that comparison of the stress fields (resulting from the slip models) with the location of events in the learning period provides advance information on whether or not a particular hybrid model will perform better than STEP.

Getting on the List

MedlinePlus

... on the list Getting on the list First step For most people, the first step in receiving ... Langhorne, explains how the national waiting list works: Steps you need to take Here are the necessary ...

Development of personal pollen information—the next generation of pollen information and a step forward for hay fever sufferers

NASA Astrophysics Data System (ADS)

Kmenta, Maximilian; Bastl, Katharina; Jäger, Siegfried; Berger, Uwe

2014-10-01

Pollen allergies affect a large part of the European population and are considered likely to increase. User feedback indicates that there are difficulties in providing proper information and valid forecasts using traditional methods of aerobiology due to a variety of factors. Allergen content, pollen loads, and pollen allergy symptoms vary per region and year. The first steps in challenging such issues have already been undertaken. A personalized pollen-related symptom forecast is thought to be a possible answer. However, attempts made thus far have not led to an improvement in daily forecasting procedures. This study describes a model that was launched in 2013 in Austria to provide the first available personal pollen information. This system includes innovative forecast models using bi-hourly pollen data, traditional pollen forecasts based on historical data, meteorological data, and recent symptom data from the patient's hayfever diary. Furthermore, it calculates the personal symptom load in real time, in particular, the entries of the previous 5 days, to classify users. The personal pollen information was made available in Austria on the Austrian pollen information website and via a mobile pollen application, described herein for the first time. It is supposed that the inclusion of personal symptoms will lead to major improvements in pollen information concerning hay fever sufferers.

Step responses of a torsional system with multiple clearances: Study of vibro-impact phenomenon using experimental and computational methods

NASA Astrophysics Data System (ADS)

Oruganti, Pradeep Sharma; Krak, Michael D.; Singh, Rajendra

2018-01-01

Recently Krak and Singh (2017) proposed a scientific experiment that examined vibro-impacts in a torsional system under a step down excitation and provided preliminary measurements and limited non-linear model studies. A major goal of this article is to extend the prior work with a focus on the examination of vibro-impact phenomena observed under step responses in a torsional system with one, two or three controlled clearances. First, new measurements are made at several locations with a higher sampling frequency. Measured angular accelerations are examined in both time and time-frequency domains. Minimal order non-linear models of the experiment are successfully constructed, using piecewise linear stiffness and Coulomb friction elements; eight cases of the generic system are examined though only three are experimentally studied. Measured and predicted responses for single and dual clearance configurations exhibit double sided impacts and time varying periods suggest softening trends under the step down torque. Non-linear models are experimentally validated by comparing results with new measurements and with those previously reported. Several metrics are utilized to quantify and compare the measured and predicted responses (including peak to peak accelerations). Eigensolutions and step responses of the corresponding linearized models are utilized to better understand the nature of the non-linear dynamic system. Finally, the effect of step amplitude on the non-linear responses is examined for several configurations, and hardening trends are observed in the torsional system with three clearances.

Failure mode and effects analysis: A community practice perspective.

PubMed

Schuller, Bradley W; Burns, Angi; Ceilley, Elizabeth A; King, Alan; LeTourneau, Joan; Markovic, Alexander; Sterkel, Lynda; Taplin, Brigid; Wanner, Jennifer; Albert, Jeffrey M

2017-11-01

To report our early experiences with failure mode and effects analysis (FMEA) in a community practice setting. The FMEA facilitator received extensive training at the AAPM Summer School. Early efforts focused on department education and emphasized the need for process evaluation in the context of high profile radiation therapy accidents. A multidisciplinary team was assembled with representation from each of the major department disciplines. Stereotactic radiosurgery (SRS) was identified as the most appropriate treatment technique for the first FMEA evaluation, as it is largely self-contained and has the potential to produce high impact failure modes. Process mapping was completed using breakout sessions, and then compiled into a simple electronic format. Weekly sessions were used to complete the FMEA evaluation. Risk priority number (RPN) values > 100 or severity scores of 9 or 10 were considered high risk. The overall time commitment was also tracked. The final SRS process map contained 15 major process steps and 183 subprocess steps. Splitting the process map into individual assignments was a successful strategy for our group. The process map was designed to contain enough detail such that another radiation oncology team would be able to perform our procedures. Continuous facilitator involvement helped maintain consistent scoring during FMEA. Practice changes were made responding to the highest RPN scores, and new resulting RPN scores were below our high-risk threshold. The estimated person-hour equivalent for project completion was 258 hr. This report provides important details on the initial steps we took to complete our first FMEA, providing guidance for community practices seeking to incorporate this process into their quality assurance (QA) program. Determining the feasibility of implementing complex QA processes into different practice settings will take on increasing significance as the field of radiation oncology transitions into the new TG-100 QA paradigm. © 2017 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

Method and apparatus for characterizing propagation delays of integrated circuit devices

NASA Technical Reports Server (NTRS)

Blaes, Brent R. (Inventor); Buehler, Martin G. (Inventor)

1987-01-01

Propagation delay of a signal through a channel is measured by cyclically generating a first step-wave signal for transmission through the channel to a two-input logic element and a second step-wave signal with a controlled delay to the second input terminal of the logic element. The logic element determines which signal is present first at its input terminals and stores a binary signal indicative of that determination for control of the delay of the second signal which is advanced or retarded for the next cycle until both the propagation delayed first step-wave signal and the control delayed step-wave signal are coincident. The propagation delay of the channel is then determined by measuring the time between the first and second step-wave signals out of the controlled step-wave signal generator.

Steps toward Gaining Knowledge of World Music Pedagogy

ERIC Educational Resources Information Center

Carlisle, Katie

2013-01-01

This article presents steps toward gaining knowledge of world music pedagogy for K-12 general music educators. The majority of the article details steps that invite engagement within everyday contexts with accessible resources within local and online communities. The steps demonstrate ways general music teachers can diversify and self-direct their…

Short bowel mucosal morphology, proliferation and inflammation at first and repeat STEP procedures.

PubMed

Mutanen, Annika; Barrett, Meredith; Feng, Yongjia; Lohi, Jouko; Rabah, Raja; Teitelbaum, Daniel H; Pakarinen, Mikko P

2018-04-17

Although serial transverse enteroplasty (STEP) improves function of dilated short bowel, a significant proportion of patients require repeat surgery. To address underlying reasons for unsuccessful STEP, we compared small intestinal mucosal characteristics between initial and repeat STEP procedures in children with short bowel syndrome (SBS). Fifteen SBS children, who underwent 13 first and 7 repeat STEP procedures with full thickness small bowel samples at median age 1.5 years (IQR 0.7-3.7) were included. The specimens were analyzed histologically for mucosal morphology, inflammation and muscular thickness. Mucosal proliferation and apoptosis was analyzed with MIB1 and Tunel immunohistochemistry. Median small bowel length increased 42% by initial STEP and 13% by repeat STEP (p=0.05), while enteral caloric intake increased from 6% to 36% (p=0.07) during 14 (12-42) months between the procedures. Abnormal mucosal inflammation was frequently observed both at initial (69%) and additional STEP (86%, p=0.52) surgery. Villus height, crypt depth, enterocyte proliferation and apoptosis as well as muscular thickness were comparable at first and repeat STEP (p>0.05 for all). Patients, who required repeat STEP tended to be younger (p=0.057) with less apoptotic crypt cells (p=0.031) at first STEP. Absence of ileocecal valve associated with increased intraepithelial leukocyte count and reduced crypt cell proliferation index (p<0.05 for both). No adaptive mucosal hyperplasia or muscular alterations occurred between first and repeat STEP. Persistent inflammation and lacking mucosal growth may contribute to continuing bowel dysfunction in SBS children, who require repeat STEP procedure, especially after removal of the ileocecal valve. Level IV, retrospective study. Copyright © 2018 Elsevier Inc. All rights reserved.

Evaluating and selecting an information system, Part 1.

PubMed

Neal, T

1993-01-01

Initial steps in the process of evaluating and selecting a computerized information system for the pharmacy department are described. The first step in the selection process is to establish a steering committee and a project committee. The steering committee oversees the project, providing policy guidance, making major decisions, and allocating budgeted expenditures. The project committee conducts the departmental needs assessment, identifies system requirements, performs day-to-day functions, evaluates vendor proposals, trains personnel, and implements the system chosen. The second step is the assessment of needs in terms of personnel, workload, physical layout, and operating requirements. The needs assessment should be based on the department's mission statement and strategic plan. The third step is the development of a request for information (RFI) and a request for proposal (RFP). The RFI is a document designed for gathering preliminary information from a wide range of vendors; this general information is used in deciding whether to send the RFP to a given vendor. The RFP requests more detailed information and gives the purchaser's exact specifications for a system; the RFP also includes contractual information. To help ensure project success, many institutions turn to computer consultants for guidance. The initial steps in selecting a computerized pharmacy information system are establishing computerization committees, conducting a needs assessment, and writing an RFI and an RFP. A crucial early decision is whether to seek a consultant's expertise.

Multicenter collaborative for orthopaedic research in India: An opportunity for global leadership

PubMed Central

Mathew, George; Sancheti, Parag; Jain, Anil; Bhandari, Mohit

2008-01-01

Road traffic accidents are increasing at an alarming rate and have become a major public health concern in India. In addition, there is a lack of trauma research output and reliable data from India. There are several issues and challenges that have presented an opportunity for researchers and surgeons in India to develop a collaborative aimed at improving the quality and productivity of orthopaedic trauma research. Establishing a network of surgical researchers across India is a necessary first step towards global leadership in orthopaedic surgery trials. PMID:19826521

Determination of 241Am in sediments by isotope dilution high resolution inductively coupled plasma mass spectrometry (ID HR ICP-MS).

PubMed

Agarande, M; Benzoubir, S; Bouisset, P; Calmet, D

2001-08-01

Trace levels (pg kg(-1)) of 241Am in sediments were determined by isotope dilution high resolution inductively coupled plasma mass spectrometry (ID HR ICP-MS) using a microconcentric nebulizer. 241Am was isolated from major elements like Ca and Fe by different selective precipitations. In further steps. Am was first separated from other transuranic elements and purified by anion exchange and extraction chromatography prior to the mass spectrometric measurements. The ID HR ICP-MS results are compared with isotope dilution alpha spectrometry.

Undocumented migration to Venezuela.

PubMed

Van Roy, R

1984-01-01

"In 1980 Venezuela took...steps to regularize the undocumented migrant population. While the number responding to the amnesty was small relative to expectations, the majority of illegals appeared to have regularized their status. For the first time it was possible to assess objectively the characteristics of the undocumented population. Moreover, the problem of illegal migrants seems to have been temporarily solved, a result of both the amnesty and the country's declining economic activity." Topics covered in the present article include the nationality, geographic distribution, sex and age distribution, educational status, and occupations of undocumented migrants. excerpt

One‐Step Reforming of CO2 and CH4 into High‐Value Liquid Chemicals and Fuels at Room Temperature by Plasma‐Driven Catalysis

PubMed Central

Wang, Li; Yi, Yanhui; Wu, Chunfei; Guo, Hongchen

2017-01-01

Abstract The conversion of CO2 with CH4 into liquid fuels and chemicals in a single‐step catalytic process that bypasses the production of syngas remains a challenge. In this study, liquid fuels and chemicals (e.g., acetic acid, methanol, ethanol, and formaldehyde) were synthesized in a one‐step process from CO2 and CH4 at room temperature (30 °C) and atmospheric pressure for the first time by using a novel plasma reactor with a water electrode. The total selectivity to oxygenates was approximately 50–60 %, with acetic acid being the major component at 40.2 % selectivity, the highest value reported for acetic acid thus far. Interestingly, the direct plasma synthesis of acetic acid from CH4 and CO2 is an ideal reaction with 100 % atom economy, but it is almost impossible by thermal catalysis owing to the significant thermodynamic barrier. The combination of plasma and catalyst in this process shows great potential for manipulating the distribution of liquid chemical products in a given process. PMID:28842938

Step-up training for colorectal and gastric ESD and the challenge of ESD training in the proximal colon: results from a German Center.

PubMed

Ebigbo, Alanna; Probst, Andreas; Römmele, Christoph; Messmann, Helmut

2018-05-01

The endoscopic submucosal dissection (ESD) of cancerous and precancerous lesions in the gastrointestinal (GI) tract is an effective but difficult-to-learn procedure, especially for Western endoscopists. We developed a step-up training protocol and evaluated its outcome on a single endoscopist using specific performance measures. The training protocol included a 12-month period of 50 observational and supervised ESD cases as well as 24 animal procedures. After completion of the protocol, ESD competency was evaluated in the first 30 independent ESD cases. Majority of lesions were located in the stomach and rectum. Performance measures included R0-resection rate, complication rate and resection speed. R0 resection rate was 93 %, complication rate was 7 % and median resection speed was 6,77 cm 2 /h. 1 case of delayed perforation with subsequent hemicolectomy occurred in the descending colon. The ESD step-up training protocol used in this study on a single endoscopist showed excellent outcomes for lesions in the rectum and stomach. However, ESD training in the upper colon remains a challenge.

A major trauma course based on posters, audio-guides and simulation improves the management skills of medical students: Evaluation via medical simulator.

PubMed

Cuisinier, Adrien; Schilte, Clotilde; Declety, Philippe; Picard, Julien; Berger, Karine; Bouzat, Pierre; Falcon, Dominique; Bosson, Jean Luc; Payen, Jean-François; Albaladejo, Pierre

2015-12-01

Medical competence requires the acquisition of theoretical knowledge and technical skills. Severe trauma management teaching is poorly developed during internship. Nevertheless, the basics of major trauma management should be acquired by every future physician. For this reason, the major trauma course (MTC), an educational course in major traumatology, has been developed for medical students. Our objective was to evaluate, via a high fidelity medical simulator, the impact of the MTC on medical student skills concerning major trauma management. The MTC contains 3 teaching modalities: posters with associated audio-guides, a procedural workshop on airway management and a teaching session using a medical simulator. Skills evaluation was performed 1 month before (step 1) and 1 month after (step 3) the MTC (step 2). Nineteen students were individually evaluated on 2 different major trauma scenarios. The primary endpoint was the difference between steps 1 and 3, in a combined score evaluating: admission, equipment, monitoring and safety (skill set 1) and systematic clinical examinations (skill set 2). After the course, the combined primary outcome score improved by 47% (P<0.01). Scenario choice or the order of use had no significant influence on the skill set evaluations. This study shows improvement in student skills for major trauma management, which we attribute mainly to the major trauma course developed in our institution. Copyright © 2015 Société française d’anesthésie et de réanimation (Sfar). Published by Elsevier Masson SAS. All rights reserved.

The Scientific Publications of Richard H. Dalitz, FRS (1925-2006)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aitchison, Ian J.R.; Close, Frank E.; Gal, Avraham

2006-03-29

Professor Richard H. Dalitz passed away on January 13, 2006. He was almost 81 years old and his outstanding contributions are intimately connected to some of the major breakthroughs of the 20th century in particle and nuclear physics. These outstanding contributions go beyond the Dalitz Plot, Dalitz Pair and CDD poles that bear his name. He pioneered the theoretical study of strange baryon resonances, of baryon spectroscopy in the quark model, and of hypernuclei, to all of which he made lasting contributions. His formulation of the ''{theta} - {tau} puzzle'' led to the discovery that parity is not a symmetrymore » of the weak interactions. A brief scientific evaluation of Dalitz's major contributions to particle and nuclear physics is hereby presented, followed by the first comprehensive list of his scientific publications, as assembled from several sources. The list is divided into two categories: the first, main part comprises Dalitz's research papers and reviews, including topics in the history of particle physics, biographies and reminescences; the second part lists book reviews, public lectures and obituaries authored by Dalitz, and books edited by him. This provides the first necessary step towards a more systematic research of the Dalitz heritage in modern physics.« less

Continuous track paths reveal additive evidence integration in multistep decision making.

PubMed

Buc Calderon, Cristian; Dewulf, Myrtille; Gevers, Wim; Verguts, Tom

2017-10-03

Multistep decision making pervades daily life, but its underlying mechanisms remain obscure. We distinguish four prominent models of multistep decision making, namely serial stage, hierarchical evidence integration, hierarchical leaky competing accumulation (HLCA), and probabilistic evidence integration (PEI). To empirically disentangle these models, we design a two-step reward-based decision paradigm and implement it in a reaching task experiment. In a first step, participants choose between two potential upcoming choices, each associated with two rewards. In a second step, participants choose between the two rewards selected in the first step. Strikingly, as predicted by the HLCA and PEI models, the first-step decision dynamics were initially biased toward the choice representing the highest sum/mean before being redirected toward the choice representing the maximal reward (i.e., initial dip). Only HLCA and PEI predicted this initial dip, suggesting that first-step decision dynamics depend on additive integration of competing second-step choices. Our data suggest that potential future outcomes are progressively unraveled during multistep decision making.

A history of neutrons in biology: the development of neutron protein crystallography at BNL and LANL.

PubMed

Schoenborn, Benno P

2010-11-01

The first neutron diffraction data were collected from crystals of myoglobin almost 42 years ago using a step-scan diffractometer with a single detector. Since then, major advances have been made in neutron sources, instrumentation and data collection and analysis, and in biochemistry. Fundamental discoveries about enzyme mechanisms, biological complex structures, protein hydration and H-atom positions have been and continue to be made using neutron diffraction. The promise of neutrons has not changed since the first crystal diffraction data were collected. Today, with the developments of beamlines at spallation neutron sources and the use of the Laue method for data collection, the field of neutrons in structural biology has renewed vitality.

Fabrication of magnetic tunnel junctions connected through a continuous free layer to enable spin logic devices

NASA Astrophysics Data System (ADS)

Wan, Danny; Manfrini, Mauricio; Vaysset, Adrien; Souriau, Laurent; Wouters, Lennaert; Thiam, Arame; Raymenants, Eline; Sayan, Safak; Jussot, Julien; Swerts, Johan; Couet, Sebastien; Rassoul, Nouredine; Babaei Gavan, Khashayar; Paredis, Kristof; Huyghebaert, Cedric; Ercken, Monique; Wilson, Christopher J.; Mocuta, Dan; Radu, Iuliana P.

2018-04-01

Magnetic tunnel junctions (MTJs) interconnected via a continuous ferromagnetic free layer were fabricated for spin torque majority gate (STMG) logic. The MTJs are biased independently and show magnetoelectric response under spin transfer torque. The electrical control of these devices paves the way to future spin logic devices based on domain wall (DW) motion. In particular, it is a significant step towards the realization of a majority gate. To our knowledge, this is the first fabrication of a cross-shaped free layer shared by several perpendicular MTJs. The fabrication process can be generalized to any geometry and any number of MTJs. Thus, this framework can be applied to other spin logic concepts based on magnetic interconnect. Moreover, it allows exploration of spin dynamics for logic applications.

Detection and control of Ganoderma boninense: strategies and perspectives.

PubMed

Hushiarian, Roozbeh; Yusof, Nor Azah; Dutse, Sabo Wada

2013-01-01

The oil palm, an economically important tree, has been one of the world's major sources of edible oil and a significant precursor of biodiesel fuel. Unfortunately, it now faces the threat of a devastating disease. Many researchers have identified Ganoderma boninense as the major pathogen that affects the oil palm tree and eventually kills it. But identification of the pathogen is just the first step. No single method has yet been able to halt the continuing spread of the disease. This paper discusses the modes of infection and transmission of Ganoderma boninense and suggests techniques for its early detection. Additionally, the paper proposes some possible ways of controlling the disease. Such measures, if implemented, could contribute significantly to the sustainability of the palm oil industry in South East Asia.

Space experiment development process

NASA Technical Reports Server (NTRS)

Depauw, James F.

1987-01-01

Described is a process for developing space experiments utilizing the Space Shuttle. The role of the Principal Investigator is described as well as the Principal Investigator's relation with the project development team. Described also is the sequence of events from an early definition phase through the steps of hardware development. The major interactions between the hardware development program and the Shuttle integration and safety activities are also shown. The presentation is directed to people with limited Shuttle experiment experience. The objective is to summarize the development process, discuss the roles of major participants, and list some lessons learned. Two points should be made at the outset. First, no two projects are the same so the process varies from case to case. Second, the emphasis here is on Code EN/Microgravity Science and Applications Division (MSAD).

Ammonia oxidation: Ecology, physiology, biochemistry and why they must all come together.

PubMed

Lehtovirta-Morley, Laura E

2018-05-01

Ammonia oxidation is a fundamental core process in the global biogeochemical nitrogen cycle. Oxidation of ammonia (NH3) to nitrite (NO2 -) is the first and rate-limiting step in nitrification and is carried out by distinct groups of microorganisms. Ammonia oxidation is essential for nutrient turnover in most terrestrial, aquatic and engineered ecosystems and plays a major role, both directly and indirectly, in greenhouse gas production and environmental damage. Although ammonia oxidation has been studied for over a century, this research field has been galvanised in the past decade by the surprising discoveries of novel ammonia oxidising microorganisms. This review reflects on the ammonia oxidation research to date and discusses the major gaps remaining in our knowledge of the biology of ammonia oxidation.

49 CFR 40.175 - What steps does the first laboratory take with a split specimen?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false What steps does the first laboratory take with a split specimen? 40.175 Section 40.175 Transportation Office of the Secretary of Transportation... steps does the first laboratory take with a split specimen? (a) As the laboratory at which the primary...

The relationship between communication scores from the USMLE Step 2 Clinical Skills examination and communication ratings for first-year internal medicine residents.

PubMed

Winward, Marcia L; Lipner, Rebecca S; Johnston, Mary M; Cuddy, Monica M; Clauser, Brian E

2013-05-01

This study extends available evidence about the relationship between scores on the Step 2 Clinical Skills (CS) component of the United States Medical Licensing Examination and subsequent performance in residency. It focuses on the relationship between Step 2 CS communication and interpersonal skills scores and communication skills ratings that residency directors assign to residents in their first postgraduate year of internal medicine training. It represents the first large-scale evaluation of the extent to which Step 2 CS communication and interpersonal skills scores can be extrapolated to examinee performance in supervised practice. Hierarchical linear modeling techniques were used to examine the relationships among examinee characteristics, residency program characteristics, and residency-director-provided ratings. The sample comprised 6,306 examinees from 238 internal medicine residency programs who completed Step 2 CS for the first time in 2005 and received ratings during their first year of internal medicine residency training. Although the relationship is modest, Step 2 CS communication and interpersonal skills scores predict communication skills ratings for first-year internal medicine residents after accounting for other factors. The results of this study make a reasonable case that Step 2 CS communication and interpersonal skills scores provide useful information for predicting the level of communication skill that examinees will display in their first year of internal medicine residency training. This finding demonstrates some level of extrapolation from the testing context to behavior in supervised practice, thus providing validity-related evidence for using Step 2 CS communication and interpersonal skills scores in high-stakes decisions.

A multistage gene normalization system integrating multiple effective methods.

PubMed

Li, Lishuang; Liu, Shanshan; Li, Lihua; Fan, Wenting; Huang, Degen; Zhou, Huiwei

2013-01-01

Gene/protein recognition and normalization is an important preliminary step for many biological text mining tasks. In this paper, we present a multistage gene normalization system which consists of four major subtasks: pre-processing, dictionary matching, ambiguity resolution and filtering. For the first subtask, we apply the gene mention tagger developed in our earlier work, which achieves an F-score of 88.42% on the BioCreative II GM testing set. In the stage of dictionary matching, the exact matching and approximate matching between gene names and the EntrezGene lexicon have been combined. For the ambiguity resolution subtask, we propose a semantic similarity disambiguation method based on Munkres' Assignment Algorithm. At the last step, a filter based on Wikipedia has been built to remove the false positives. Experimental results show that the presented system can achieve an F-score of 90.1%, outperforming most of the state-of-the-art systems.

A marker-free system for the analysis of movement disabilities.

PubMed

Legrand, L; Marzani, F; Dusserre, L

1998-01-01

A major step toward improving the treatments of disabled persons may be achieved by using motion analysis equipment. We are developing such a system. It allows the analysis of plane human motion (e.g. gait) without using the tracking of markers. The system is composed of one fixed camera which acquires an image sequence of a human in motion. Then the treatment is divided into two steps: first, a large number of pixels belonging to the boundaries of the human body are extracted at each acquisition time. Secondly, a two-dimensional model of the human body, based on tapered superquadrics, is successively matched with the sets of pixels previously extracted; a specific fuzzy clustering process is used for this purpose. Moreover, an optical flow procedure gives a prediction of the model location at each acquisition time from its location at the previous time. Finally we present some results of this process applied to a leg in motion.

STS-114: Crew Interviews: 1. Jim Kelly 2. Charlie Camarda

NASA Technical Reports Server (NTRS)

2005-01-01

1) STS-114 Pilot James Kelly mentions his primary job as the Pilot is to back up Commander Eileen Collins all through the flight. James discusses in detail his robotics operations for all of the extravehicular activities and spacewalk work, as well as moving the logistics module back and forth, onto the station and back in the payload bay. He shares his thoughts on the Columbia, the STS-114 mission as a new chapter in space exploration, and the International Space Station. 2) STS-114 Mission Specialist Charlie Camarda discusses his major role in the mission, his feelings for this being his first Space Shuttle flight; shares his thoughts on the Columbia; mentioned that STS-114 is a baby step to what is needed to do for the next step in space exploration, and gave some examples on how the International Space Station can help pave the path to future space exploration.

Major mechanistic differences between the reactions of hydroxylamine with phosphate di- and tri-esters.

PubMed

Medeiros, Michelle; Wanderlind, Eduardo H; Mora, José R; Moreira, Raphaell; Kirby, Anthony J; Nome, Faruk

2013-10-07

Hydroxylamine reacts as an oxygen nucleophile, most likely via its ammonia oxide tautomer, towards both phosphate di- and triesters of 2-hydroxypyridine. But the reactions are very different. The product of the two-step reaction with the triester TPP is trapped by the NH2OH present in solution to generate diimide, identified from its expected disproportionation and trapping products. The reaction with H3N(+)-O(-) shows general base catalysis, which calculations show is involved in the breakdown of the phosphorane addition-intermediate of a two-step reaction. The reactivity of the diester anion DPP(-) is controlled by its more basic pyridyl N. Hydroxylamine reacts preferentially with the substrate zwitterion DPP(±) to displace first one then a second 2-pyridone, in concerted S(N)2(P) reactions, forming O-phosphorylated products which are readily hydrolysed to inorganic phosphate. The suggested mechanisms are tested and supported by extensive theoretical calculations.

Ubiquitin and Proteasomes in Transcription

PubMed Central

Geng, Fuqiang; Wenzel, Sabine; Tansey, William P.

2013-01-01

Regulation of gene transcription is vitally important for the maintenance of normal cellular homeostasis. Failure to correctly regulate gene expression, or to deal with problems that arise during the transcription process, can lead to cellular catastrophe and disease. One of the ways cells cope with the challenges of transcription is by making extensive use of the proteolytic and nonproteolytic activities of the ubiquitin-proteasome system (UPS). Here, we review recent evidence showing deep mechanistic connections between the transcription and ubiquitin-proteasome systems. Our goal is to leave the reader with a sense that just about every step in transcription—from transcription initiation through to export of mRNA from the nucleus—is influenced by the UPS and that all major arms of the system—from the first step in ubiquitin (Ub) conjugation through to the proteasome—are recruited into transcriptional processes to provide regulation, directionality, and deconstructive power. PMID:22404630

Optimized performance of quasi-solid-state DSSC with PEO-bismaleimide polymer blend electrolytes filled with a novel procedure.

PubMed

Lee, Dong Ha; Sun, Kyung Chul; Qadir, Muhammad Bilal; Jeong, Sung Hoon

2014-12-01

Dye-sensitized solar cell (DSSC) is an attractive renewable energy technology currently under intense investigation. Electrolyte plays an important role in the photovoltaic performance of the DSSCs and many efforts have been contributed to study different kinds of electrolytes with various characteristics such as liquid electrolytes, polymer electrolytes and so on. In this study, DSSC is developed by using quasi-solid electrolyte and a novel procedure is adopted for filling this electrolyte. The quasi-solid-state electrolyte was prepared by mixing Poly ethylene oxide (PEO) and bismaleimide together and constitution was taken as PEO (15 wt%) at various bismaleimide concentrations (1, 3, 5 wt%). The novel procedure of filling electrolyte consists of three major steps (first step: filling liquid electrolyte, second step: vaporization of liquid electrolyte, third step: refilling quasi-solid-state electrolyte). The electrochemical and photovoltaic performances of DSSCs with these electrolytes were also investigated. The electrochemical impedance spectroscopy (EIS) indicated that TiO2/Dye/electrolyte impedance is reduced and electron lifetime is increased, and consequently efficiency of cell has been improved after using this novel procedure. The photovoltaic power conversion efficiency of 6.39% has been achieved under AM 1.5 simulated sunlight (100 W/cm2) through this novel procedure and by using specified blend of polymers.

STEP and STEPSPL: Computer programs for aerodynamic model structure determination and parameter estimation

NASA Technical Reports Server (NTRS)

Batterson, J. G.

1986-01-01

The successful parametric modeling of the aerodynamics for an airplane operating at high angles of attack or sideslip is performed in two phases. First the aerodynamic model structure must be determined and second the associated aerodynamic parameters (stability and control derivatives) must be estimated for that model. The purpose of this paper is to document two versions of a stepwise regression computer program which were developed for the determination of airplane aerodynamic model structure and to provide two examples of their use on computer generated data. References are provided for the application of the programs to real flight data. The two computer programs that are the subject of this report, STEP and STEPSPL, are written in FORTRAN IV (ANSI l966) compatible with a CDC FTN4 compiler. Both programs are adaptations of a standard forward stepwise regression algorithm. The purpose of the adaptation is to facilitate the selection of a adequate mathematical model of the aerodynamic force and moment coefficients of an airplane from flight test data. The major difference between STEP and STEPSPL is in the basis for the model. The basis for the model in STEP is the standard polynomial Taylor's series expansion of the aerodynamic function about some steady-state trim condition. Program STEPSPL utilizes a set of spline basis functions.

A novel automatic segmentation workflow of axial breast DCE-MRI

NASA Astrophysics Data System (ADS)

Besbes, Feten; Gargouri, Norhene; Damak, Alima; Sellami, Dorra

2018-04-01

In this paper we propose a novel process of a fully automatic breast tissue segmentation which is independent from expert calibration and contrast. The proposed algorithm is composed by two major steps. The first step consists in the detection of breast boundaries. It is based on image content analysis and Moore-Neighbour tracing algorithm. As a processing step, Otsu thresholding and neighbors algorithm are applied. Then, the external area of breast is removed to get an approximated breast region. The second preprocessing step is the delineation of the chest wall which is considered as the lowest cost path linking three key points; These points are located automatically at the breast. They are respectively, the left and right boundary points and the middle upper point placed at the sternum region using statistical method. For the minimum cost path search problem, we resolve it through Dijkstra algorithm. Evaluation results reveal the robustness of our process face to different breast densities, complex forms and challenging cases. In fact, the mean overlap between manual segmentation and automatic segmentation through our method is 96.5%. A comparative study shows that our proposed process is competitive and faster than existing methods. The segmentation of 120 slices with our method is achieved at least in 20.57+/-5.2s.

Open repair of pectus carinatum

PubMed Central

Scarci, Marco; Bertolaccini, Luca; Panagiotopoulos, Nikolaos

2016-01-01

Pectus carinatum is a chest deformity characterized by a protrusion of the sternum and ribs (usually 3–7 ribs). The treatment of these patients varies in relation to age. In younger patients we prefer to use a custom-made brace, surgery is the elective treatment for older patients. The minimally-invasive technique (Abramson procedure) is used rarely and for mild defects, whereas open surgery is still preferred by many surgeons to repair major deformities. In our institution we use a modified Ravitch approach trough a vertical incision, which is performed on top of the most prominent part of the defect. The first step is the mobilisation of the pectoralis muscle to allow the exposure of the skeletal structure of the sternum and of the deformed costal cartilages. The second step is to perform multiple parasternal rib cartilage resections to shorten the overabundant length that causes the deformity, avoiding damaging the perichondrium. The third step consists of a wedge osteotomy at the level of the most prominent point of the sternum. The last step is the remodelling and the stabilization of the chest wall. The sternum stabilization is obtained through the placement of one titanium bar and with the filling of the space created at the osteotomy line with fragments of cartilages or with demineralized bone tissue. The perichondrial sheats of the ribs are sutured to the sternum with absorbable sutures. The postoperative pain management should be a priority in order to avoid further complications. In our institution we use a patient-controlled analgesia (PCA) with morphine on the day of the surgery. On the first postoperative day we remove the PCA and start an oral therapy with the combination of opioids and non-steroidal anti-inflammatory drugs. Early mobilisation is also a milestone in the postoperative management of these patients. PMID:29078478

Open repair of pectus carinatum.

PubMed

Scarci, Marco; Bertolaccini, Luca; Panagiotopoulos, Nikolaos; Bedetti, Benedetta

2016-01-01

Pectus carinatum is a chest deformity characterized by a protrusion of the sternum and ribs (usually 3-7 ribs). The treatment of these patients varies in relation to age. In younger patients we prefer to use a custom-made brace, surgery is the elective treatment for older patients. The minimally-invasive technique (Abramson procedure) is used rarely and for mild defects, whereas open surgery is still preferred by many surgeons to repair major deformities. In our institution we use a modified Ravitch approach trough a vertical incision, which is performed on top of the most prominent part of the defect. The first step is the mobilisation of the pectoralis muscle to allow the exposure of the skeletal structure of the sternum and of the deformed costal cartilages. The second step is to perform multiple parasternal rib cartilage resections to shorten the overabundant length that causes the deformity, avoiding damaging the perichondrium. The third step consists of a wedge osteotomy at the level of the most prominent point of the sternum. The last step is the remodelling and the stabilization of the chest wall. The sternum stabilization is obtained through the placement of one titanium bar and with the filling of the space created at the osteotomy line with fragments of cartilages or with demineralized bone tissue. The perichondrial sheats of the ribs are sutured to the sternum with absorbable sutures. The postoperative pain management should be a priority in order to avoid further complications. In our institution we use a patient-controlled analgesia (PCA) with morphine on the day of the surgery. On the first postoperative day we remove the PCA and start an oral therapy with the combination of opioids and non-steroidal anti-inflammatory drugs. Early mobilisation is also a milestone in the postoperative management of these patients.

Assessing the Effectiveness of First Step to Success: Are Short-Term Results the First Step to Long-Term Behavioral Improvements?

ERIC Educational Resources Information Center

Sumi, W. Carl; Woodbridge, Michelle W.; Javitz, Harold S.; Thornton, S. Patrick; Wagner, Mary; Rouspil, Kristen; Yu, Jennifer W.; Seeley, John R.; Walker, Hill M.; Golly, Annemieke; Small, Jason W.; Feil, Edward G.; Severson, Herbert H.

2013-01-01

This article reports on the effectiveness of First Step to Success, a secondary-level intervention appropriate for students in early elementary school who experience moderate to severe behavior problems and are at risk for academic failure. The authors demonstrate the intervention's short-term effects on multiple behavioral and academic outcomes…

40 CFR 35.4105 - What is the first step for getting a TAG?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false What is the first step for getting a TAG? 35.4105 Section 35.4105 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND... Tag § 35.4105 What is the first step for getting a TAG? To let EPA know of your group's interest in...

A nonchromatographic process for purification of secretory immunoglobulins from caprine whey.

PubMed

Matlschweiger, Alexander; Himmler, Gottfried; Linhart, Clemens; Harasek, Michael; Hahn, Rainer

2017-05-01

Secretory immunoglobulins are an important antibody class being primarily responsible for immunoprotection of mucosal surfaces. A simple, non-chromatographic purification process for secretory immunoglobulins from caprine whey was developed. In the first process step whey was concentrated 30-40-fold on a 500 kDa membrane, thereby increasing the purity from 3% to 15%. The second step consisted of a fractionated PEG precipitation, in which high molecular weight impurities were removed first and in the second stage the secretory immunoglobulins were precipitated, leaving a majority of the low molecular weight proteins in solution. The re-dissolved secretory immunoglobulin fraction had a purity of 43% which could then be increased to 72% by diafiltration at a volume exchange factor of 10. Further increase of purity was only possible at the expense of very high buffer consumption. If diafiltration was performed directly after ultrafiltration, followed by precipitation, the yield was higher but purity was only 54%. Overall, filtration performance was characterized by high concentration polarization, therefore process conditions were set to low trans-membrane pressure and moderate protein concentration. As such purity and to a lesser extent throughput were the major objectives rather than yield, since whey, as a by-product of the dairy industry, is a cheap raw material of almost unlimited supply. Ultra-/diafiltration performance was described well by correlations using dimensionless numbers. Compared with a theoretical model (Graetz/Leveque solution) the flux was slightly overestimated. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:642-653, 2017. © 2017 American Institute of Chemical Engineers.

A first step toward understanding best practices in leadership training in undergraduate medical education: a systematic review.

PubMed

Webb, Allison M B; Tsipis, Nicholas E; McClellan, Taylor R; McNeil, Michael J; Xu, MengMeng; Doty, Joseph P; Taylor, Dean C

2014-11-01

To characterize leadership curricula in undergraduate medical education as a first step toward understanding best practices in leadership education. The authors systematically searched the PubMed, Education Resources Information Center, Academic Search Complete, and Education Full Text databases for peer-reviewed English-language articles published 1980-2014 describing curricula with interventions to teach medical students leadership skills. They characterized educational settings, curricular format, and learner and instructor types. They assessed effectiveness and quality of evidence using five-point scales adapted from Kirkpatrick's four-level training evaluation model (scale: 0-4) and a Best Evidence Medical Education guide (scale: 1-5), respectively. They classified leadership skills taught into the five Medical Leadership Competency Framework (MLCF) domains. Twenty articles describing 24 curricula met inclusion criteria. The majority of curricula (17; 71%) were longitudinal, delivered over periods of one semester to four years. The most common setting was the classroom (12; 50%). Curricula were frequently provided to both preclinical and clinical students (11; 46%); many (9; 28%) employed clinical faculty as instructors. The majority (19; 79%) addressed at least three MLCF domains; most common were working with others (21; 88%) and managing services (18; 75%). The median effectiveness score was 1.5, and the median quality of evidence score was 2. Most studies did not demonstrate changes in student behavior or quantifiable results. Aligning leadership curricula with competency models, such as the MLCF, would create opportunities to standardize evaluation of outcomes, leading to better measurement of student competency and a better understanding of best practices.

Historical evolution of ideas on eclampsia/preeclampsia: A proposed optimistic view of preeclampsia.

PubMed

Robillard, Pierre-Yves; Dekker, Gustaaf; Chaouat, Gérard; Scioscia, Marco; Iacobelli, Silvia; Hulsey, Thomas C

2017-09-01

Eclampsia (together with epilepsy) being the first disease ever written down since the beginning of writings in mankind 5000 years ago, we will make a brief presentation of the different major steps in comprehension of Pre-eclampsia. 1) 1840. Rayer, description of proteinuria in eclampsia, 2) 1897 Vaquez, discovery of gestational hypertension in eclamptic women, 3) In the 1970's, description of the "double" trophoblastic invasion existing only in humans (Brosens & Pijnenborg,), 4) between the 1970's and the 1990's, description of preeclampsia being a couple disease. The "paternity problem" (and therefore irruption of immunology), 5) at the end of the 1980's, a major step forward: Preeclampsia being a global endothelial cell disease (glomeruloendotheliosis, hepatic or cerebral endotheliosis, HELLP, eclampsia), inflammation (J.Roberts.C Redman, R Taylor), 6) End of the 1990's: Consensus for a distinction between early onset preeclampsia EOP and late onset LOP (34 weeks gestation), EOP being rather a problem of implantation of the trophoblast (and the placenta), LOP being rather a pre-existing maternal problem (obesity, diabetes, coagulopathies etc…). LOP is predominant everywhere on this planet, but enormously predominant in developed countries: 90% of cases. This feature is very different in countries where women have their first child very young (88% of world births), where the fatal EOP (early onset) occurs in more than 30% of cases. 7) What could be the common factor which could explain the maternal global endotheliosis in EOP and LOP? Discussion about the inositol phospho glycans P type. Copyright © 2017. Published by Elsevier B.V.

The endothermic ATP hydrolysis and crossbridge attachment steps drive the increase of force with temperature in isometric and shortening muscle

PubMed Central

Offer, Gerald; Ranatunga, K W

2015-01-01

The isometric tetanic tension of skeletal muscle increases with temperature because attached crossbridge states bearing a relatively low force convert to those bearing a higher force. It was previously proposed that the tension-generating step(s) in the crossbridge cycle was highly endothermic and was therefore itself directly targeted by changes in temperature. However, this did not explain why a rapid rise in temperature (a temperature jump) caused a much slower rate of rise of tension than a rapid length step. This led to suggestions that the step targeted by a temperature rise is not the tension-generating step but is an extra step in the attached pathway of the crossbridge cycle, perhaps located on a parallel pathway. This enigma has been a major obstacle to a full understanding of the operation of the crossbridge cycle. We have now used a previously developed mechano-kinetic model of the crossbridge cycle in frog muscle to simulate the temperature dependence of isometric tension and shortening velocity. We allowed all five steps in the cycle to be temperature-sensitive. Models with different starting combinations of enthalpy changes and activation enthalpies for the five steps were refined by downhill simplex runs and scored by their ability to fit experimental data on the temperature dependence of isometric tension and the relationship between force and shortening velocity in frog muscle. We conclude that the first tension-generating step may be weakly endothermic and that the rise of tension with temperature is largely driven by the preceding two strongly endothermic steps of ATP hydrolysis and attachment of M.ADP.Pi to actin. The refined model gave a reasonable fit to the available experimental data and after a temperature jump the overall rate of tension rise was much slower than after a length step as observed experimentally. The findings aid our understanding of the crossbridge cycle by showing that it may not be necessary to include an additional temperature-sensitive step. PMID:25564737

Establishment of chronic hepatitis C virus infection: Translational evasion of oxidative defence

PubMed Central

Chan, Shiu-Wan

2014-01-01

Hepatitis C virus (HCV) causes a clinically important disease affecting 3% of the world population. HCV is a single-stranded, positive-sense RNA virus belonging to the genus Hepacivirus within the Flaviviridae family. The virus establishes a chronic infection in the face of an active host oxidative defence, thus adaptation to oxidative stress is key to virus survival. Being a small RNA virus with a limited genomic capacity, we speculate that HCV deploys a different strategy to evade host oxidative defence. Instead of counteracting oxidative stress, it utilizes oxidative stress to facilitate its own survival. Translation is the first step in the replication of a plus strand RNA virus so it would make sense if the virus can exploit the host oxidative defence in facilitating this very first step. This is particularly true when HCV utilizes an internal ribosome entry site element in translation, which is distinctive from that of cap-dependent translation of the vast majority of cellular genes, thus allowing selective translation of genes under conditions when global protein synthesis is compromised. Indeed, we were the first to show that HCV translation was stimulated by an important pro-oxidant-hydrogen peroxide in hepatocytes, suggesting that HCV is able to adapt to and utilize the host anti-viral response to facilitate its own translation thus allowing the virus to thrive under oxidative stress condition to establish chronicity. Understanding how HCV translation is regulated under oxidative stress condition will advance our knowledge on how HCV establishes chronicity. As chronicity is the initiator step in disease progression this will eventually lead to a better understanding of pathogenicity, which is particularly relevant to the development of anti-virals and improved treatments of HCV patients using anti-oxidants. PMID:24659872

The first steps towards a de minimus, affordable NEA exploration architecture

NASA Astrophysics Data System (ADS)

Landis, Rob R.; Abell, Paul A.; Adamo, Daniel R.; Barbee, Brent W.; Johnson, Lindley N.

2013-03-01

The impetus for asteroid exploration is scientific, political, and pragmatic. The notion of sending human explorers to asteroids is not new. Piloted missions to these primitive bodies were first discussed in the 1960s, pairing Saturn V rockets with enhanced Apollo spacecraft to explore what were then called "Earth-approaching asteroids." Two decades ago, NASA's Space Exploration Initiative (SEI) also briefly examined the possibility of visiting these small celestial bodies. Most recently, the US Human Space Flight Review Committee (the second Augustine Commission) suggested that near-Earth objects (NEOs) represent a target-rich environment for exploration via the "Flexible Path" option. However, prior to seriously considering human missions to NEOs, it has become clear that we currently lack a robust catalog of human-accessible targets. The majority of the known NEOs identified by a study team across several NASA centers as "human-accessible" are probably too small and have orbits that are too uncertain to consider mounting piloted expeditions to these small worlds. The first step in developing a comprehensive catalog is, therefore, to complete a space-based NEO survey. The resulting catalog of candidate NEOs would then be transformed into a matrix of opportunities for robotic and human missions for the next several decades and shared with the international community. This initial step of a space-based NEO survey is therefore the linchpin to laying the foundation of a low-risk architecture to venture out and explore these primitive bodies. We suggest such a minimalist framework architecture from (1) extensive ground-based and precursor spacecraft investigations (while applying operational knowledge from science-driven robotic missions), (2) astronaut servicing of spacecraft operating at geosynchronous Earth orbit to retain essential skills and experience, and (3) applying the sum of these skills, knowledge and experience to piloted missions to NEOs.

20 CFR 404.231 - Steps in computing your primary insurance amount under the guaranteed alternative-general.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Steps in computing your primary insurance... Steps in computing your primary insurance amount under the guaranteed alternative—general. If you reach age 62 after 1978 but before 1984, we follow three major steps in finding your guaranteed alternative...

The University of Minnesota Morris (UMM) STEP Program: an initiative to encourage the participation of Native Americans in the sciences

NASA Astrophysics Data System (ADS)

Cotter, J. F.

2009-12-01

The goal of the UMM STEP program is to increase the number of graduates in STEM fields through innovative curricular, recruiting and mentoring strategies. A unique focus of the UMM STEP program is increasing the number of Native American science majors. The STEP program fosters a summer research environment where peer interaction and mentoring creates a web of support. To do so we will establish a supportive and fulfilling pipeline that: 1) Identifies Native American students and involves them in research while they are high school; 2) Mentors and prepares participants for university academics the summer before their freshman year; 3) Provides a complete tuition waiver, mentoring and a support network throughout their undergraduate career; and 4) Involves participants in an active and dynamic summer undergraduate research environment where under-represented individuals are in the majority. The third and fourth components of this pipeline are in very good shape. The Morris campus was originally established as an Indian School in 1887. When the federal government deeded the Indian school campus to the University of Minnesota a stipulation was that Native American students attend the college for free. At present, 196 Native Americans are enrolled at UMM (50 are STEM majors). The UMM STEP research experience provides the unique opportunity to interact with a scientific community that both breaks down a number of traditional barriers and aids in the maturation of these students as scientists. In Summer 2008, 4 students were involved in summer research and in 2009 seven Native American students participated. Early efforts of the UMM STEP program are encouraging. UMM Admissions staff used the UMM STEP program to recruit Native American students and the P.I. phoned “uncommitted admits”, visited reservations and hosted reservation student visits. The result was an increase in freshman Native American Science majors from 7 in Fall 2007, 15 in fall 2008 and 20 in fall 2009. Overall, Native American Science majors increased from 33 (2007) to 39 (2008) and now 50 (2009). One UMM STEP participant from summer of 2008 graduated and is now in the University of Wisconsin Pharmacy Program. The biggest challenge to date for the UMM STEP program is making contact with rising junior and senior High School students. As a result, the envisioned UMM STEP “pipeline” remains without a solid foundation. Strategies employed to resolve this situation include: 1) writing to all educators with announcements and advertisements for summer opportunities for High School Juniors, 2) contacting alumni who educators in school districts with a significant number of Native American students, 3) utilizing the UMM STEP review board to make additional contacts in reservations, and 4) bringing UMM STEP students to High Schools to talk about their experiences and answer questions about UMM. This research is funded by the NSF STEP program (NSF/DUE-0653063).

Sewage treatment method

DOEpatents

Fassbender, Alex G.

1995-01-01

The invention greatly reduces the amount of ammonia in sewage plant effluent. The process of the invention has three main steps. The first step is dewatering without first digesting, thereby producing a first ammonia-containing stream having a low concentration of ammonia, and a second solids-containing stream. The second step is sending the second solids-containing stream through a means for separating the solids from the liquid and producing an aqueous stream containing a high concentration of ammonia. The third step is removal of ammonia from the aqueous stream using a hydrothermal process.

Mechanical work for step-to-step transitions is a major determinant of the metabolic cost of human walking.

PubMed

Donelan, J Maxwell; Kram, Rodger; Kuo, Arthur D

2002-12-01

In the single stance phase of walking, center of mass motion resembles that of an inverted pendulum. Theoretically, mechanical work is not necessary for producing the pendular motion, but work is needed to redirect the center of mass velocity from one pendular arc to the next during the transition between steps. A collision model predicts a rate of negative work proportional to the fourth power of step length. Positive work is required to restore the energy lost, potentially exacting a proportional metabolic cost. We tested these predictions with humans (N=9) walking over a range of step lengths (0.4-1.1 m) while keeping step frequency fixed at 1.8 Hz. We measured individual limb external mechanical work using force plates, and metabolic rate using indirect calorimetry. As predicted, average negative and positive external mechanical work rates increased with the fourth power of step length (from 1 W to 38 W; r(2)=0.96). Metabolic rate also increased with the fourth power of step length (from 7 W to 379 W; r(2)=0.95), and linearly with mechanical work rate. Mechanical work for step-to-step transitions, rather than pendular motion itself, appears to be a major determinant of the metabolic cost of walking.

Kinematic and behavioral analyses of protective stepping strategies and risk for falls among community living older adults.

PubMed

Bair, Woei-Nan; Prettyman, Michelle G; Beamer, Brock A; Rogers, Mark W

2016-07-01

Protective stepping evoked by externally applied lateral perturbations reveals balance deficits underlying falls. However, a lack of comprehensive information about the control of different stepping strategies in relation to the magnitude of perturbation limits understanding of balance control in relation to age and fall status. The aim of this study was to investigate different protective stepping strategies and their kinematic and behavioral control characteristics in response to different magnitudes of lateral waist-pulls between older fallers and non-fallers. Fifty-two community-dwelling older adults (16 fallers) reacted naturally to maintain balance in response to five magnitudes of lateral waist-pulls. The balance tolerance limit (BTL, waist-pull magnitude where protective steps transitioned from single to multiple steps), first step control characteristics (stepping frequency and counts, spatial-temporal kinematic, and trunk position at landing) of four naturally selected protective step types were compared between fallers and non-fallers at- and above-BTL. Fallers took medial-steps most frequently while non-fallers most often took crossover-back-steps. Only non-fallers varied their step count and first step control parameters by step type at the instants of step initiation (onset time) and termination (trunk position), while both groups modulated step execution parameters (single stance duration and step length) by step type. Group differences were generally better demonstrated above-BTL. Fallers primarily used a biomechanically less effective medial-stepping strategy that may be partially explained by reduced somato-sensation. Fallers did not modulate their step parameters by step type at first step initiation and termination, instances particularly vulnerable to instability, reflecting their limitations in balance control during protective stepping. Copyright © 2016. Published by Elsevier Ltd.

Patient accounting systems: needs and capabilities.

PubMed

Kennedy, O G; Collignon, S

1987-09-01

In the first article of this series, it was stated that most finance executives are not very satisfied with the performance of their current patient accounting systems. What steps can a patient accounting system planner take to help ensure the system selected will garner high ratings from managers and users? Two primarily steps need to be taken. First, the planner needs to perform a thorough evaluation of both near- and long-term patient accounting requirements. He should determine which features and functions are most critical and ensure they are incorporated as selection criteria. The planner should also incorporate institutional planning into that process, such as planned expansion of facilities or services, to ensure that the system selected has the growth potential, interfacing capabilities, and flexibility to respond to the changing environment. Then, once system needs are fully charted, the planner should educate himself about the range of patient accounting system solutions available. The data show that most financial managers lack knowledge about most of the major patient accounting system vendors in the marketplace. Once vendors that offer systems that seemingly could meet needs are identified, the wise system planner will also want to obtain information from users about those vendors, to determine whether the systems perform as described and whether the vendor has been responsive to the needs of its customers. This step is a particularly important part of the planning process, because the data also show that users of some systems are significantly more satisfied than users of other patient accounting systems.

Does First Step to Success Have Long-Term Impacts on Student Behavior? An Analysis of Efficacy Trial Data

ERIC Educational Resources Information Center

Woodbridge, Michelle W.; Sumi, W. Carl; Wagner, Mary M.; Javitz, Harold S.; Seeley, John R.; Walker, Hill M.; Small, Jason W.; Golly, Annemieke; Feil, Edward G.; Severson, Herbert H.

2014-01-01

First Step to Success (First Step; Walker et al., 1997, 1998) is a secondary-level intervention for students with behavior problems in early elementary school. The purposes of this study were to assess whether effects in student behavior and academics at posttest shown in a recent efficacy trial (Walker et al., 2009) were maintained at follow-up…

The possible influence of L-histidine on the origin of the first peptides on the primordial Earth.

PubMed

Reiner, Hannes; Plankensteiner, Kristof; Fitz, Daniel; Rode, Bernd Michael

2006-06-01

One of the most unsettled problems of prebiotic evolution and the origin of life is the explanation why one enantiomeric form of biomolecules prevailed. In the experiments presented in this paper, the influence of L-histidine on the peptide formation in the Salt-Induced Peptide Formation (SIPF) reaction of the enantiomeric forms of valine, proline, serine, lysine, and tryptophan, and the catalytic effects in this first step toward the first building blocks of proteins on the primordial earth were investigated. In the majority of the produced dipeptides, a remarkable increase of yields was shown, and the preference of the L-amino acids in the peptide formation in most cases cannot be denied. In summary, our data provide further experimental evidence for the plausibility of the SIPF reaction and point at a possible important role of L-histidine in the chemical evolution on the primordial Earth.

Influence of the random walk finite step on the first-passage probability

NASA Astrophysics Data System (ADS)

Klimenkova, Olga; Menshutin, Anton; Shchur, Lev

2018-01-01

A well known connection between first-passage probability of random walk and distribution of electrical potential described by Laplace equation is studied. We simulate random walk in the plane numerically as a discrete time process with fixed step length. We measure first-passage probability to touch the absorbing sphere of radius R in 2D. We found a regular deviation of the first-passage probability from the exact function, which we attribute to the finiteness of the random walk step.

Climate change and world food supply, demand, and trade

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fischer, G.; Frohberg, K.; Parry, M.L.

This chapter summarizes the findings of a major interdisciplinary research effort by scientists in 25 countries. The study examined the potential biophysical responses of major food crops to changing atmospheric composition and climate, and projected potential socio-economic consequences. In a first step, crop models were used to estimate how changing climatic conditions may alter yields of major crops at a number of sites representing both major production areas and vulnerable regions at low, mid, and high latitudes. Then socio-economic impacts were assessed for the period 1990 up to the Year 2060 with a dynamic recursive model of the world foodmore » system. The results of the assessment suggest that a doubling of the atmospheric CO{sub 2} concentration will have little effect on global food production levels. Globally, impacts on crop production will be small compared to the required production increases between now and the middle of the next century. But, under all simulated scenarios possible negative impacts were mostly observed in low latitudes thus tending to increase the disparity between developed and developing countries.« less

A hybrid image fusion system for endovascular interventions of peripheral artery disease.

PubMed

Lalys, Florent; Favre, Ketty; Villena, Alexandre; Durrmann, Vincent; Colleaux, Mathieu; Lucas, Antoine; Kaladji, Adrien

2018-07-01

Interventional endovascular treatment has become the first line of management in the treatment of peripheral artery disease (PAD). However, contrast and radiation exposure continue to limit the feasibility of these procedures. This paper presents a novel hybrid image fusion system for endovascular intervention of PAD. We present two different roadmapping methods from intra- and pre-interventional imaging that can be used either simultaneously or independently, constituting the navigation system. The navigation system is decomposed into several steps that can be entirely integrated within the procedure workflow without modifying it to benefit from the roadmapping. First, a 2D panorama of the entire peripheral artery system is automatically created based on a sequence of stepping fluoroscopic images acquired during the intra-interventional diagnosis phase. During the interventional phase, the live image can be synchronized on the panorama to form the basis of the image fusion system. Two types of augmented information are then integrated. First, an angiography panorama is proposed to avoid contrast media re-injection. Information exploiting the pre-interventional computed tomography angiography (CTA) is also brought to the surgeon by means of semiautomatic 3D/2D registration on the 2D panorama. Each step of the workflow was independently validated. Experiments for both the 2D panorama creation and the synchronization processes showed very accurate results (errors of 1.24 and [Formula: see text] mm, respectively), similarly to the registration on the 3D CTA (errors of [Formula: see text] mm), with minimal user interaction and very low computation time. First results of an on-going clinical study highlighted its major clinical added value on intraoperative parameters. No image fusion system has been proposed yet for endovascular procedures of PAD in lower extremities. More globally, such a navigation system, combining image fusion from different 2D and 3D image sources, is novel in the field of endovascular procedures.

Developing stepped care treatment for depression (STEPS): study protocol for a pilot randomised controlled trial.

PubMed

Hill, Jacqueline J; Kuyken, Willem; Richards, David A

2014-11-20

Stepped care is recommended and implemented as a means to organise depression treatment. Compared with alternative systems, it is assumed to achieve equivalent clinical effects and greater efficiency. However, no trials have examined these assumptions. A fully powered trial of stepped care compared with intensive psychological therapy is required but a number of methodological and procedural uncertainties associated with the conduct of a large trial need to be addressed first. STEPS (Developing stepped care treatment for depression) is a mixed methods study to address uncertainties associated with a large-scale evaluation of stepped care compared with high-intensity psychological therapy alone for the treatment of depression. We will conduct a pilot randomised controlled trial with an embedded process study. Quantitative trial data on recruitment, retention and the pathway of patients through treatment will be used to assess feasibility. Outcome data on the effects of stepped care compared with high-intensity therapy alone will inform a sample size calculation for a definitive trial. Qualitative interviews will be undertaken to explore what people think of our trial methods and procedures and the stepped care intervention. A minimum of 60 patients with Major Depressive Disorder will be recruited from an Improving Access to Psychological Therapies service and randomly allocated to receive stepped care or intensive psychological therapy alone. All treatments will be delivered at clinic facilities within the University of Exeter. Quantitative patient-related data on depressive symptoms, worry and anxiety and quality of life will be collected at baseline and 6 months. The pilot trial and interviews will be undertaken concurrently. Quantitative and qualitative data will be analysed separately and then integrated. The outcomes of this study will inform the design of a fully powered randomised controlled trial to evaluate the effectiveness and efficiency of stepped care. Qualitative data on stepped care will be of immediate interest to patients, clinicians, service managers, policy makers and guideline developers. A more informed understanding of the feasibility of a large trial will be obtained than would be possible from a purely quantitative (or qualitative) design. Current Controlled Trials ISRCTN66346646 registered on 2 July 2014.

Congopain from Trypanosoma congolense: drug target and vaccine candidate.

PubMed

Lalmanach, Gilles; Boulangé, Alain; Serveau, Carole; Lecaille, Fabien; Scharfstein, Julio; Gauthier, Francis; Authié, Edith

2002-05-01

Trypanosomes are the etiological agents of human sleeping sickness and livestock trypanosomosis (nagana), which are major diseases in Africa. Their cysteine proteases (CPs), which are members of the papain family, are expressed during the infective stages of the parasites' life cycle. They are suspected to act as pathogenic factors in the mammalian host, where they also trigger prominent immune responses. Trypanosoma congolense, a major pathogenic species in livestock, possesses at least two families of closely related CPs, named CP1 and CP2. Congopain, a CP2-type of enzyme, shares structural and functional resemblances with cruzipain from T. cruzi and with mammalian cathepsin L. Like CPs from other Trypanosomatids, congopain might be an attractive target for trypanocidal drugs. Here we summarise the current knowledge in the two main areas of research on congopain: first, the biochemical properties of congopain were characterised and its substrate specificity was determined, as a first step towards drug design; second, the possibility was being explored that inhibition of congopain by host-specific antibodies may mitigate the pathology associated with trypanosome infection.

The Early to Middle Triassic continental-marine transition of NW Bulgaria: sedimentology, palynology and sequence stratigraphy

NASA Astrophysics Data System (ADS)

Ajdanlijsky, George; Götz, Annette E.; Strasser, André

2018-04-01

Sedimentary facies and cycles of the Triassic continental-marine transition of NW Bulgaria are documented in detail from reference sections along the Iskar river gorge between the villages of Tserovo and Opletnya. The depositional environments evolved from anastomosing and meandering river systems in the Petrohan Terrigenous Group to mixed fluvial and tidal settings in the Svidol Formation, and to peritidal and shallow-marine conditions in the Opletnya Member of the Mogila Formation. For the first time, the palynostratigraphic data presented here allow for dating the transitional interval and for the precise identification of a major sequence boundary between the Petrohan Terrigenous Group and the Svidol Formation (Iskar Carbonate Group). This boundary most probably corresponds to the major sequence boundary Ol4 occurring in the upper Olenekian of the Tethyan realm and thus enables interregional correlation. The identification of regionally traceable sequence boundaries based on biostratigraphic age control is a first step towards a more accurate stratigraphic correlation and palaeogeographic interpretation of the Early to early Middle Triassic in NW Bulgaria.

Mission to Planet Earth Strategic Enterprise Plan 1996-2002

NASA Technical Reports Server (NTRS)

1996-01-01

Mission to Planet Earth's (MTPE's) first Strategic Enterprise Plan, issued in May 1995, defined the Agency's major goals and objectives as well as constraints. This update of the Strategic Enterprise Plan identifies the following major changes: a focused Science Research Plan that integrates space-based and in situ observational critical science to address critical science uncertainties; a technology infusion plan to reduce the cost of future missions; a series of flight opportunities to infuse new science into the overall program; and a tighter coupling between NASA and NOAA to reduce costs and to improve the overall program. Three important new initiatives are also under development and are described briefly in this plan: MTPE Education Strategy, MTPE Commercial Strategy, and an emerging concept for an Integrated Global Observing Strategy. This first update to the MTPE Strategic Enterprise Plan captures these new developments, and takes a significant step forward in planning this complex Earth system science endeavor. The plan and other information on MTPE may be viewed via the Internet at http://www.hq.nasa.gov/office/mtpe/.

Predictive brain networks for major depression in a semi-multimodal fusion hierarchical feature reduction framework.

PubMed

Yang, Jie; Yin, Yingying; Zhang, Zuping; Long, Jun; Dong, Jian; Zhang, Yuqun; Xu, Zhi; Li, Lei; Liu, Jie; Yuan, Yonggui

2018-02-05

Major depressive disorder (MDD) is characterized by dysregulation of distributed structural and functional networks. It is now recognized that structural and functional networks are related at multiple temporal scales. The recent emergence of multimodal fusion methods has made it possible to comprehensively and systematically investigate brain networks and thereby provide essential information for influencing disease diagnosis and prognosis. However, such investigations are hampered by the inconsistent dimensionality features between structural and functional networks. Thus, a semi-multimodal fusion hierarchical feature reduction framework is proposed. Feature reduction is a vital procedure in classification that can be used to eliminate irrelevant and redundant information and thereby improve the accuracy of disease diagnosis. Our proposed framework primarily consists of two steps. The first step considers the connection distances in both structural and functional networks between MDD and healthy control (HC) groups. By adding a constraint based on sparsity regularization, the second step fully utilizes the inter-relationship between the two modalities. However, in contrast to conventional multi-modality multi-task methods, the structural networks were considered to play only a subsidiary role in feature reduction and were not included in the following classification. The proposed method achieved a classification accuracy, specificity, sensitivity, and area under the curve of 84.91%, 88.6%, 81.29%, and 0.91, respectively. Moreover, the frontal-limbic system contributed the most to disease diagnosis. Importantly, by taking full advantage of the complementary information from multimodal neuroimaging data, the selected consensus connections may be highly reliable biomarkers of MDD. Copyright © 2017 Elsevier B.V. All rights reserved.

Mining the Sloan Digital Sky Survey in Search of Extremely α-poor Stars in the Galaxy

NASA Astrophysics Data System (ADS)

Xing, Q. F.; Zhao, G.

2014-07-01

As we know, the majority of metal-poor Galactic halo stars appear to have chemical abundances that were enhanced by α-elements (e.g., O, Mg, Si, Ca, and Ti) during the early stage of the Galaxy. Observed metal-poor halo stars preserved this pattern by exhibiting abundance ratios [α/Fe] ~+0.4. A few striking exceptions that show severe departures from the general enhanced α-element chemical abundance trends of the halo have been discovered in recent years. They possess relatively low [α/Fe] compared to other comparable-metallicity stars, with abundance ratios over 0.5 dex lower. These stars may have a different chemical enrichment history from the majority of the halo. Similarly, low-α abundances are also displayed by satellite dwarf spheroidal (dSph) galaxies. We present a method to select extremely α-poor (EAP) stars from the SDSS/SEGUE survey. The method consists of a two-step approach. In the first step, we select suspected metal-poor ([Fe/H] <-0.5) and α-poor ([Mg/Fe] <0) stars as our targets. In the second step, we determine [Mg/Fe] from low-resolution (R = 2000) stellar spectra for our targets and select stars with [Mg/Fe] <-0.1 as candidate EAP stars. In a sample of 40,000 stars with atmospheric parameters in the range of T eff = [4500, 7000] K, log g = [1.0, 5.0], and [Fe/H] = [-4.0, +0.5], 14 candidate stars were identified. Three of these stars are found to have already been confirmed by other research.

Fundamental mechanisms in premixed flame propagation via vortex-flame interactions: Numerical simulations

NASA Technical Reports Server (NTRS)

Mantel, Thierry

1994-01-01

The goal of the present study is to assess numerically the ability of single-step and two-step chemical models to describe the main features encountered during the interaction between a two-dimensional vortex pair and a premixed laminar flame. In the two-step mechanism, the reaction kinetics are represented by a first chain branching reaction A + X yields 2X and a second chain termination reaction X + X yields P. This paper presents the fundamental mechanisms occurring during vortex-flame interactions and the relative impact of the major parameters encountered in turbulent premixed flames and suspected of playing a role in quenching mechanism: (1) Influence of stretch is investigated by analyzing the contribution of curvature and tangential strain on the local structure of the flame. The effect of Lewis number on the flame response to a strained field is analyzed. (2) Radiative heat losses which are suspected to be partially or totally responsible for quenching are also investigated. (3) The effect of the diffusion of the radicals is studied using a two-step mechanism in which an intermediate species is present. The parameters of the two-step mechanism are entirely determined from physical arguments. (4) Precise quantitative comparisons between the DNS and the experimental results of Samaniego et al are performed. These comparisons concern the evolution of the minimum heat release rate found along the flame front during the interaction and the distribution of the heat release rate along the flame front.

Users guide to E859 phoswich analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Costales, J.B.

1992-11-30

In this memo the authors describe the analysis path used to transform the phoswich data from raw data banks into cross sections suitable for publication. The primary purpose of this memo is not to document each analysis step in great detail but rather to point the reader to the fortran code used and to point out the essential features of the analysis path. A flow chart which summarizes the various steps performed to massage the data from beginning to end is given. In general, each step corresponds to a fortran program which was written to perform that particular task. Themore » automation of the data analysis has been kept purposefully minimal in order to ensure the highest quality of the final product. However, tools have been developed which ease the non--automated steps. There are two major parallel routes for the data analysis: data reduction and acceptance determination using detailed GEANT Monte Carlo simulations. In this memo, the authors will first describe the data reduction up to the point where PHAD banks (Pass 1-like banks) are created. They the will describe the steps taken in the GEANT Monte Carlo route. Note that a detailed memo describing the methodology of the acceptance corrections has already been written. Therefore the discussion of the acceptance determination will be kept to a minimum and the reader will be referred to the other memo for further details. Finally, they will describe the cross section formation process and how final spectra are extracted.« less

[Facing, accepting, growing and expecting: the practical experience of nursing students during their first clinical practice].

PubMed

Sun, Jia-Jing; Sun, Hui-Lin

2011-04-01

Clinical practice experiences, while important, can be highly stressful for nursing students and have a deep effect on their subsequent professional development. This study explored nursing student experiences during their first clinical practice. The study used exploratory and descriptive research methodologies, and researchers selected a phenomenological approach to analysis. Nine nursing students described experiences centered on their first clinical practices using daily dairies and assignments. Transcripts were analyzed using interpretative phenomenological analysis. Four major themes emerged from the data, including: (1) Joining an exciting and intimidating journey in which participants anticipated a precious learning opportunity while fearing failure; (2) Identifying professional role models in which participants learned about nursing content from nursing staff and through step by step instruction from teachers; (3) Growing into caring relationships in which participants increasingly realized the importance of communication, gave empathy and caring to patients, and discovered that patients are the best teachers; and (4) Insight into self-professional capacity and the expectation of their future learning in which participants learned from actual experience, evaluated self-performance and encouraged themselves. Such facilitated self-improvement and instilled the learning necessary to advance to the next stage. Nursing student clinical practice experiences may be used to both advance academic studies and enhance understanding of student feelings, difficulties and experiences. Such can assist nursing students to gain greater positive experiences in their profession.

Expression and immunogenicity of an Escherichia coli K99 fimbriae subunit antigen in soybean.

PubMed

Piller, Kenneth J; Clemente, Thomas E; Jun, Sang Mu; Petty, Cynthia C; Sato, Shirley; Pascual, David W; Bost, Kenneth L

2005-09-01

Enterotoxigenic Escherichia coli (ETEC) cause acute diarrhea in humans and farm animals, and can be fatal if the host is left untreated. As a potential alternative to traditional needle vaccination of cattle, we investigated the feasibility of expressing the major K99 fimbrial subunit, FanC, in soybean (Glycine max) for use as an edible subunit vaccine. As a first step in this developmental process, a synthetic version of fanC was optimized for expression in the cytosol and transferred to soybean via Agrobacterium-mediated transformation. Western analysis of T(0) events revealed the presence of a peptide with the expected mobility for FanC in transgenic protein extracts, and immunofluorescense confirmed localization to the cytosol. Two T(0) lines, which accumulated FanC to levels near 0.5% of total soluble protein, were chosen for further molecular characterization in the T(1) and T(2) generations. Mice immunized intraperitoneally with protein extract derived from transgenic leaves expressing synthetic FanC developed significant antibody titers against bacterially derived FanC and produced antigen-specific CD4(+) T lymphocytes, demonstrating the ability of transgenic FanC to function as an immunogen. These experiments are the first to demonstrate the expression and immunogenicity of a model subunit antigen in the soybean system, and mark the first steps toward the development of a K99 edible vaccine to protect against ETEC.

A Seminar Course to Prepare Astronomy Undergraduate Students for Multiple Career Paths

NASA Astrophysics Data System (ADS)

Hayes-Gehrke, Melissa; Harris, Andrew

2018-01-01

The increasing focus on the importance of STEM careers has led increasing numbers of students to enroll in STEM majors at the University of Maryland, including traditionally smaller majors such as Astronomy. The pursuit of a PhD is neither desirable nor appropriate for many of these students, but most of them lack knowledge of other options open to students with a rigorous science undergraduate degree. We have developed an interactive seminar (1-credit) course (first offered in Fall 2017) intended to expose new Astronomy majors to an array of possible career paths, and give them guidance on steps they can take to prepare for these careers as well as graduate school. Supporting topics include discussions of the elements necessary for success in their undergraduate studies, skills needed preparing for undergraduate research and internship experiences, and showing them how and when an undergraduate research experience will be beneficial for them. We present the seminar course learning goals, topic list and course structure, and results of pre- and post-attitudes surveys.

A Randomized Controlled Trial of the First Step to Success Early Intervention: Demonstration of Program Efficacy Outcomes in a Diverse, Urban School District

ERIC Educational Resources Information Center

Walker, Hill M.; Seeley, John R.; Small, Jason; Severson, Herbert H.; Graham, Bethany A.; Feil, Edward G.; Serna, Loretta; Golly, Annemieke M.; Forness, Steven R.

2009-01-01

This article reports on a randomized controlled trial of the First Step to Success early intervention that was conducted over a 4-year period in Albuquerque Public Schools. First Step is a selected intervention for students in Grades 1 through 3 with externalizing behavior problems, and it addresses secondary prevention goals and objectives. It…

Earth Resources Technology Satellite-1 (ERTS-1) data and anthropology: Use of these data in carrying capacity estimates for sites in Upper Volta and Niger

NASA Technical Reports Server (NTRS)

Reining, P. (Principal Investigator)

1974-01-01

The author has identified the following significant results. Repetitively derived multispectral band imagery from ERTS-1 is now available for many parts of the earth's land surface and represents major new data sources for anthropological work in habitat, land use, and settlement patterns. A completed first step test of ERTS-1 data is available in carrying capacity estimates for Mossi, Hausa, and Sonrai sites derived from: (1) field work; (2) aerial photography; and (3) ERTS-1. Data can test more than one carrying capacity formula.

Managing innovation to overhaul a patient-care environment.

PubMed

McKenna, W

1989-01-01

Innovation in public service organizations must be managed, just as it must be in any business. However, in older, large public organizations, specific strategies are needed. One such strategy is described in development and impact. The first step was utilizing external demands to create an atmosphere in which change was accepted as necessary. This was followed by a relaxation of top down procedural direction accompanied by persistent concentration on establishing new standards and objectives. The final major component was a management system intended to guide and shape development of innovations into an integrated program effectively addressing the new objectives and standards.

A Most Probable Point-Based Method for Reliability Analysis, Sensitivity Analysis and Design Optimization

NASA Technical Reports Server (NTRS)

Hou, Gene J.-W; Newman, Perry A. (Technical Monitor)

2004-01-01

A major step in a most probable point (MPP)-based method for reliability analysis is to determine the MPP. This is usually accomplished by using an optimization search algorithm. The minimum distance associated with the MPP provides a measurement of safety probability, which can be obtained by approximate probability integration methods such as FORM or SORM. The reliability sensitivity equations are derived first in this paper, based on the derivatives of the optimal solution. Examples are provided later to demonstrate the use of these derivatives for better reliability analysis and reliability-based design optimization (RBDO).

Synergistic biofilm formation by Treponema denticola and Porphyromonas gingivalis.

PubMed

Yamada, Mitsunori; Ikegami, Akihiko; Kuramitsu, Howard K

2005-09-15

Biofilm formation is an important step in the etiology of periodontal diseases. In this study, in vitro biofilm formation by Treponema denticola and Porphyromonas gingivalis 381 displayed synergistic effects. Confocal microscopy demonstrated that P. gingivalis attaches to the substratum first as a primary colonizer followed by coaggregation with T. denticola to form a mixed biofilm. The T. denticola flagella mutant as well as the cytoplasmic filament mutant were shown to be essential for biofilm formation as well as coaggregation with P. gingivalis. The major fimbriae and Arg-gingipain B of P. gingivalis also play important roles in biofilm formation with T. denticola.

Diversity of the human intestinal microbial flora.

PubMed

Eckburg, Paul B; Bik, Elisabeth M; Bernstein, Charles N; Purdom, Elizabeth; Dethlefsen, Les; Sargent, Michael; Gill, Steven R; Nelson, Karen E; Relman, David A

2005-06-10

The human endogenous intestinal microflora is an essential "organ" in providing nourishment, regulating epithelial development, and instructing innate immunity; yet, surprisingly, basic features remain poorly described. We examined 13,355 prokaryotic ribosomal RNA gene sequences from multiple colonic mucosal sites and feces of healthy subjects to improve our understanding of gut microbial diversity. A majority of the bacterial sequences corresponded to uncultivated species and novel microorganisms. We discovered significant intersubject variability and differences between stool and mucosa community composition. Characterization of this immensely diverse ecosystem is the first step in elucidating its role in health and disease.

Obtaining correct compile results by absorbing mismatches between data types representations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Horie, Michihiro; Horii, Hiroshi H.; Kawachiya, Kiyokuni

Methods and a system are provided. A method includes implementing a function, which a compiler for a first language does not have, using a compiler for a second language. The implementing step includes generating, by the compiler for the first language, a first abstract syntax tree. The implementing step further includes converting, by a converter, the first abstract syntax tree to a second abstract syntax tree of the compiler for the second language using a conversion table from data representation types in the first language to data representation types in the second language. When a compilation error occurs, the implementingmore » step also includes generating a special node for error processing in the second abstract syntax tree and storing an error token in the special node. When unparsing, the implementing step additionally includes outputting the error token, in the form of source code written in the first language.« less

Obtaining correct compile results by absorbing mismatches between data types representations

DOEpatents

Horie, Michihiro; Horii, Hiroshi H.; Kawachiya, Kiyokuni; Takeuchi, Mikio

2017-03-21

Methods and a system are provided. A method includes implementing a function, which a compiler for a first language does not have, using a compiler for a second language. The implementing step includes generating, by the compiler for the first language, a first abstract syntax tree. The implementing step further includes converting, by a converter, the first abstract syntax tree to a second abstract syntax tree of the compiler for the second language using a conversion table from data representation types in the first language to data representation types in the second language. When a compilation error occurs, the implementing step also includes generating a special node for error processing in the second abstract syntax tree and storing an error token in the special node. When unparsing, the implementing step additionally includes outputting the error token, in the form of source code written in the first language.

Obtaining correct compile results by absorbing mismatches between data types representations

DOEpatents

Horie, Michihiro; Horii, Hiroshi H.; Kawachiya, Kiyokuni; Takeuchi, Mikio

2017-11-21

Methods and a system are provided. A method includes implementing a function, which a compiler for a first language does not have, using a compiler for a second language. The implementing step includes generating, by the compiler for the first language, a first abstract syntax tree. The implementing step further includes converting, by a converter, the first abstract syntax tree to a second abstract syntax tree of the compiler for the second language using a conversion table from data representation types in the first language to data representation types in the second language. When a compilation error occurs, the implementing step also includes generating a special node for error processing in the second abstract syntax tree and storing an error token in the special node. When unparsing, the implementing step additionally includes outputting the error token, in the form of source code written in the first language.

Power requirements for the first lunar outpost (FLO)

NASA Technical Reports Server (NTRS)

Cataldo, Robert L.; Bozek, John M.

1993-01-01

NASA's Exploration Program Office is currently developing a preliminary reference mission description that lays the framework from which the nation can return to the Moon by the end of the decade. The First Lunar Outpost is the initial phase of establishing a permanent presence on the Moon and the next step of sending humans to Mars. Many systems required for missions to Mars will be verified on the Moon, while still accomplishing valuable lunar science and in-situ resource utilization (ISRU). Some of FLO's major accomplishments will be long duration habitation, extended surface roving (both piloted and teleoperated) and a suite of science experiments, including lunar resources extraction. Of equal challenge will be to provide long life, reliable power sources to meet the needs of a lunar mission.

Econometrics of exhaustible resource supply: a theory and an application

DOE Office of Scientific and Technical Information (OSTI.GOV)

Epple, D.

1983-01-01

This report takes a major step toward developing a fruitful approach to empirical analysis of resource supply. It is the first empirical application of resource theory that has successfully integrated the effects of depletion of nonrenewable resources with the effects of uncertainty about future costs and prices on supply behavior. Thus, the model is a major improvement over traditional engineering-optimization models that assume complete certainty, and over traditional econometrics models that are only implicitly related to the theory of resource supply. The model is used to test hypotheses about interdependence of oil and natural gas discoveries, depletion, ultimate recovery, andmore » the role of price expectations. This paper demonstrates the feasibility of using exhaustible resource theory in the development of empirically testable models. 19 refs., 1 fig., 5 tabs.« less

On applications of chimera grid schemes to store separation

NASA Technical Reports Server (NTRS)

Cougherty, F. C.; Benek, J. A.; Steger, J. L.

1985-01-01

A finite difference scheme which uses multiple overset meshes to simulate the aerodynamics of aircraft/store interaction and store separation is described. In this chimera, or multiple mesh, scheme, a complex configuration is mapped using a major grid about the main component of the configuration, and minor overset meshes are used to map each additional component such as a store. As a first step in modeling the aerodynamics of store separation, two dimensional inviscid flow calculations were carried out in which one of the minor meshes is allowed to move with respect to the major grid. Solutions of calibrated two dimensional problems indicate that allowing one mesh to move with respect to another does not adversely affect the time accuracy of an unsteady solution. Steady, inviscid three dimensional computations demonstrate the capability to simulate complex configurations, including closely packed multiple bodies.

Analytical separations of mammalian decomposition products for forensic science: a review.

PubMed

Swann, L M; Forbes, S L; Lewis, S W

2010-12-03

The study of mammalian soft tissue decomposition is an emerging area in forensic science, with a major focus of the research being the use of various chemical and biological methods to study the fate of human remains in the environment. Decomposition of mammalian soft tissue is a postmortem process that, depending on environmental conditions and physiological factors, will proceed until complete disintegration of the tissue. The major stages of decomposition involve complex reactions which result in the chemical breakdown of the body's main constituents; lipids, proteins, and carbohydrates. The first step to understanding this chemistry is identifying the compounds present in decomposition fluids and determining when they are produced. This paper provides an overview of decomposition chemistry and reviews recent advances in this area utilising analytical separation science. Copyright © 2010 Elsevier B.V. All rights reserved.

Do low step count goals inhibit walking behavior: a randomized controlled study.

PubMed

Anson, Denis; Madras, Diane

2016-07-01

Confirmation and quantification of observed differences in goal-directed walking behavior. Single-blind, split-half randomized trial. Small rural university, Pennsylvania, United States. A total of 94 able-bodied subjects (self-selected volunteer students, faculty and staff of a small university) were randomly assigned walking goals, and 53 completed the study. Incentivized pedometer-monitored program requiring recording the step-count for 56-days into a custom-made website providing daily feedback. Steps logged per day. During the first half of the study, the 5000 and 10,000 step group logged significantly different steps 7500 and 9000, respectively (P > 0.05). During the second half of the study, the 5000 and 10,000 step groups logged 7000 and 8600 steps, respectively (significance P > 0.05). The group switched from 5000 to →10,000 steps logged, 7900 steps for the first half and 9500 steps for the second half (significance P > 0.05). The group switched from 10,000 to 5000 steps logged 9700 steps for the first half and 9000 steps for the second half, which was significant (p > 0.05). Levels of walking behavior are influenced by the goals assigned. Subjects with high goals walk more than those with low goals, even if they do not meet the assigned goal. Reducing goals from a high to low level can reduce walking behavior. © The Author(s) 2015.

Clinical features of and risk factors for major depression with history of postpartum episodes in Han Chinese women: A retrospective study.

PubMed

Yang, Fuzhong; Gardner, Charles O; Bigdeli, Tim; Gao, Jingfang; Zhang, Zhen; Tao, Ming; Liu, Ying; Li, Youhui; Wang, Gang; Shi, Jianguo; Gao, Chengge; Zhang, Kerang; Li, Kan; Wang, Xumei; Liu, Lanfen; Sun, Jing; Du, Bo; Shi, Shenxun; Zhang, Jingbei; Wu, Wenyuan; Wang, Xueyi; Shen, Jianhua; Liu, Tiebang; Gu, Danhua; Liang, Wei; Deng, Hong; Pan, Jiyang; Yang, Lijun; Jian, Hu; Jiang, Guoqin; Meng, Huaqing; Miao, Guodong; Li, Yi; Hu, Chunmei; Huang, Guoping; Zhang, Yutang; Chen, Yunchun; Ha, Baowei; Gao, Shu; Fang, Xiang; Mei, Qiyi; Hong, Xiaohong; Yang, Donglin; Liu, Tieqiao; Fengyu, Yu; Zhong, Hui; Sang, Hong; Chen, Guibing; Cai, Min; Song, Yan; Dong, Jicheng; Shen, Zhenmin; Zhang, Wei; Wang, Xiaoping; Pan, Runde; Liu, Xiaojuan; Li, Yi; Liu, Zhengrong; Zhang, Qiwen; Li, Gongying; Flint, Jonathan; Kendler, Kenneth S

2015-09-01

We sought to investigate the clinical features of and risk factors for recurrent major depression (MD) with history of postpartum episodes (PPD) in Han Chinese women and the differences between first-onset postpartum MD (MD that has its first lifetime depressive episode in the postpartum period) and first-onset non-postpartum MD (MD with history of PPD and has its first lifetime depressive episode in a period other than postpartum). Data were derived from the China, Oxford and Virginia Commonwealth University Experimental Research on Genetic Epidemiology (CONVERGE) study (N=6017 cases) and analyzed in two steps. We first examined the clinical features of and risk factors for MD patients with (N=981) or without (N=4410) a history of PPD. We then compared the differences between first-onset postpartum MD (N=583) and first-onset non-postpartum MD (N=398) in those with a history of PPD. Linear, logistic and multinomial logistic models were employed to measure the associations. A history of PPD was associated with more guilt feelings, greater psychiatric comorbidity, higher neuroticism, earlier onset and more chronicity (OR 0.2-2.8). Severe premenstrual symptoms (PMS) and more childbirths increased the risk of PPD, as did a family history of MD, childhood sexual abuse, stressful life events and lack of social support (OR 1.1-1.3). In the MD with history of PPD subsample, first-onset postpartum MD was associated with fewer recurrent major depressive episodes, less psychiatric comorbidity, lower neuroticism, less severe PMS and fewer disagreements with their husbands (OR 0.5-0.8), but more childbirths (OR 1.2). Data were obtained retrospectively through interview and recall bias may have affected the results. MD with history of PPD in Han Chinese women is typically chronic and severe, with particular risk factors including severe PMS and more childbirths. First-onset postpartum MD and first-onset non-postpartum MD can be partly differentiated by their clinical features and risk factors, but are not clearly distinctive. Copyright © 2015. Published by Elsevier B.V.

Introduction to Polymer Chemistry.

ERIC Educational Resources Information Center

Harris, Frank W.

1981-01-01

Reviews the physical and chemical properties of polymers and the two major methods of polymer synthesis: addition (chain, chain-growth, or chain-reaction), and condensation (step-growth or step-reaction) polymerization. (JN)

Fission control system for nuclear reactor

DOEpatents

Conley, G.H.; Estes, G.P.

Control system for nuclear reactor comprises a first set of reactivity modifying rods fixed in a reactor core with their upper ends stepped in height across the core, and a second set of reactivity modifying rods movable vertically within the reactor core and having their lower ends stepped to correspond with the stepped arrangement of the first set of rods, pairs of the rods of the first and second sets being in coaxial alignment.

Simulation of drift of pesticides: development and validation of a model.

PubMed

Brusselman, E; Spanoghe, P; Van der Meeren, P; Gabriels, D; Steurbaut, W

2003-01-01

Over the last decade drift of pesticides has been recognized as a major problem for the environment. High fractions of pesticides can be transported through the air and deposited in neighbouring ecosystems during and after application. A new computer-two steps-drift model is developed: FYDRIMO or F(ph)Ysical DRift MOdel. In the first step the droplet size spectrum of a nozzle is analysed. In this way the volume percentage of droplets with a certain size is known. In the second step the model results in a prediction of deposition of each droplet with a certain size. This second part of the model runs in MATLAB and is grounded on a combination of two physical factors: gravity force and friction forces. In this stage of development corrections are included for evaporation and wind force following a certain measured wind profile. For validation wind tunnel experiments were performed. Salt solutions were sprayed at two wind velocities and variable distance above the floor. Small gutters in the floor filled with filter paper were used to collect the sprayed droplets. After analysing and comparing the wind tunnel results with the model predictions, FYDRIMO seems to have good predicting capacities.

Agent-based modeling of physical activity behavior and environmental correlations: an introduction and illustration.

PubMed

Zhu, Weimo; Nedovic-Budic, Zorica; Olshansky, Robert B; Marti, Jed; Gao, Yong; Park, Youngsik; McAuley, Edward; Chodzko-Zajko, Wojciech

2013-03-01

To introduce Agent-Based Model (ABM) to physical activity (PA) research and, using data from a study of neighborhood walkability and walking behavior, to illustrate parameters for an ABM of walking behavior. The concept, brief history, mechanism, major components, key steps, advantages, and limitations of ABM were first introduced. For illustration, 10 participants (age in years: mean = 68, SD = 8) were recruited from a walkable and a nonwalkable neighborhood. They wore AMP 331 triaxial accelerometers and GeoLogger GPA tracking devices for 21 days. Data were analyzed using conventional statistics and highresolution geographic image analysis, which focused on a) path length, b) path duration, c) number of GPS reporting points, and d) interaction between distances and time. Average steps by subjects ranged from 1810-10,453 steps per day (mean = 6899, SD = 3823). No statistical difference in walking behavior was found between neighborhoods (Walkable = 6710 ± 2781, Nonwalkable = 7096 ± 4674). Three environment parameters (ie, sidewalk, crosswalk, and path) were identified for future ABM simulation. ABM should provide a better understanding of PA behavior's interaction with the environment, as illustrated using a real-life example. PA field should take advantage of ABM in future research.

Scaled-up production of poacic acid, a plant-derived antifungal agent

DOE PAGES

Yue, Fengxia; Gao, Ruili; Piotrowski, Jeff S.; ...

2017-09-01

Poacic acid, a decarboxylated product from 8–5-diferulic acid that is commonly found in monocot lignocellulosic hydrolysates, has been identified as a natural antifungal agent against economically significant fungi and oomycete plant pathogens. Starting from commercially available or monocot-derivable ferulic acid, a three-step synthetic procedure has been developed for the production of poacic acid needed for field testing in a controlled agricultural setting. First, ferulic acid was esterified to produce ethyl ferulate in 92% yield. Second, peroxidase-catalyzed free radical dehydrodimerization of ethyl ferulate produced crude diferulates, mainly 8–5-diferulate, in 91% yield. Finally, crystalline poacic acid was obtained in 25% yield viamore » alkaline hydrolysis of the crude diferulates after purification by flash-column chromatography. Thus, this new procedure offers two key improvements relevant to large-scale production: 1) bubbling air through the reaction mixture in the second step to remove acetone greatly improves the recovery efficiency of the crude diferulates; and 2) telescoping minor impurities directly into the alkaline hydrolysis step eliminates the need for additional column purifications, thus reducing the overall cost of production and removing a major impediment to process scale-up.« less

Scaled-up production of poacic acid, a plant-derived antifungal agent

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yue, Fengxia; Gao, Ruili; Piotrowski, Jeff S.

Poacic acid, a decarboxylated product from 8–5-diferulic acid that is commonly found in monocot lignocellulosic hydrolysates, has been identified as a natural antifungal agent against economically significant fungi and oomycete plant pathogens. Starting from commercially available or monocot-derivable ferulic acid, a three-step synthetic procedure has been developed for the production of poacic acid needed for field testing in a controlled agricultural setting. First, ferulic acid was esterified to produce ethyl ferulate in 92% yield. Second, peroxidase-catalyzed free radical dehydrodimerization of ethyl ferulate produced crude diferulates, mainly 8–5-diferulate, in 91% yield. Finally, crystalline poacic acid was obtained in 25% yield viamore » alkaline hydrolysis of the crude diferulates after purification by flash-column chromatography. Thus, this new procedure offers two key improvements relevant to large-scale production: 1) bubbling air through the reaction mixture in the second step to remove acetone greatly improves the recovery efficiency of the crude diferulates; and 2) telescoping minor impurities directly into the alkaline hydrolysis step eliminates the need for additional column purifications, thus reducing the overall cost of production and removing a major impediment to process scale-up.« less

One-Step Reforming of CO2 and CH4 into High-Value Liquid Chemicals and Fuels at Room Temperature by Plasma-Driven Catalysis.

PubMed

Wang, Li; Yi, Yanhui; Wu, Chunfei; Guo, Hongchen; Tu, Xin

2017-10-23

The conversion of CO 2 with CH 4 into liquid fuels and chemicals in a single-step catalytic process that bypasses the production of syngas remains a challenge. In this study, liquid fuels and chemicals (e.g., acetic acid, methanol, ethanol, and formaldehyde) were synthesized in a one-step process from CO 2 and CH 4 at room temperature (30 °C) and atmospheric pressure for the first time by using a novel plasma reactor with a water electrode. The total selectivity to oxygenates was approximately 50-60 %, with acetic acid being the major component at 40.2 % selectivity, the highest value reported for acetic acid thus far. Interestingly, the direct plasma synthesis of acetic acid from CH 4 and CO 2 is an ideal reaction with 100 % atom economy, but it is almost impossible by thermal catalysis owing to the significant thermodynamic barrier. The combination of plasma and catalyst in this process shows great potential for manipulating the distribution of liquid chemical products in a given process. © 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

Low Complexity Compression and Speed Enhancement for Optical Scanning Holography

PubMed Central

Tsang, P. W. M.; Poon, T.-C.; Liu, J.-P.; Kim, T.; Kim, Y. S.

2016-01-01

In this paper we report a low complexity compression method that is suitable for compact optical scanning holography (OSH) systems with different optical settings. Our proposed method can be divided into 2 major parts. First, an automatic decision maker is applied to select the rows of holographic pixels to be scanned. This process enhances the speed of acquiring a hologram, and also lowers the data rate. Second, each row of down-sampled pixels is converted into a one-bit representation with delta modulation (DM). Existing DM-based hologram compression techniques suffers from the disadvantage that a core parameter, commonly known as the step size, has to be determined in advance. However, the correct value of the step size for compressing each row of hologram is dependent on the dynamic range of the pixels, which could deviate significantly with the object scene, as well as OSH systems with different opical settings. We have overcome this problem by incorporating a dynamic step-size adjustment scheme. The proposed method is applied in the compression of holograms that are acquired with 2 different OSH systems, demonstrating a compression ratio of over two orders of magnitude, while preserving favorable fidelity on the reconstructed images. PMID:27708410

Testing a stepped care model for binge-eating disorder: a two-step randomized controlled trial.

PubMed

Tasca, Giorgio A; Koszycki, Diana; Brugnera, Agostino; Chyurlia, Livia; Hammond, Nicole; Francis, Kylie; Ritchie, Kerri; Ivanova, Iryna; Proulx, Genevieve; Wilson, Brian; Beaulac, Julie; Bissada, Hany; Beasley, Erin; Mcquaid, Nancy; Grenon, Renee; Fortin-Langelier, Benjamin; Compare, Angelo; Balfour, Louise

2018-05-24

A stepped care approach involves patients first receiving low-intensity treatment followed by higher intensity treatment. This two-step randomized controlled trial investigated the efficacy of a sequential stepped care approach for the psychological treatment of binge-eating disorder (BED). In the first step, all participants with BED (n = 135) received unguided self-help (USH) based on a cognitive-behavioral therapy model. In the second step, participants who remained in the trial were randomized either to 16 weeks of group psychodynamic-interpersonal psychotherapy (GPIP) (n = 39) or to a no-treatment control condition (n = 46). Outcomes were assessed for USH in step 1, and then for step 2 up to 6-months post-treatment using multilevel regression slope discontinuity models. In the first step, USH resulted in large and statistically significant reductions in the frequency of binge eating. Statistically significant moderate to large reductions in eating disorder cognitions were also noted. In the second step, there was no difference in change in frequency of binge eating between GPIP and the control condition. Compared with controls, GPIP resulted in significant and large improvement in attachment avoidance and interpersonal problems. The findings indicated that a second step of a stepped care approach did not significantly reduce binge-eating symptoms beyond the effects of USH alone. The study provided some evidence for the second step potentially to reduce factors known to maintain binge eating in the long run, such as attachment avoidance and interpersonal problems.

Technical pitfalls and tips for the valve-in-valve procedure

PubMed Central

2017-01-01

Transcatheter aortic valve implantation (TAVI) has emerged as a viable treatment modality for patients with severe aortic valve stenosis and multiple co-morbidities. More recent indications include the use of transcatheter heart valves (THV) to treat degenerated bioprosthetic surgical heart valves (SHV), which are failing due to stenosis or regurgitation. Valve-in-valve (VIV) procedures in the aortic position have been performed with a variety of THV devices, although the balloon-expandable SAPIEN valve platform (Edwards Lifesciences Ltd, Irvine, CA, USA) and self-expandable CoreValve platform (Medtronic Inc., MN, USA) have been used in majority of the patients. VIV treatment is appealing as it is less invasive than conventional surgery but optimal patient selection is vital to avoid complications such as malposition, residual high gradients and coronary obstruction. To minimize the risk of complications, thorough procedural planning is critical. The first step is identification of the degenerated SHV, including its model, size, fluoroscopic appearance. Although label size and stent internal diameter (ID) are provided by the manufacturer, it is important to note the true ID. The true ID is the ID of a SHV after the leaflets are mounted and helps determine the optimal size of THV. The second step is to determine the type and size of the THV. Although this is determined in the majority of the cases by user preference, in certain situations one THV may be more suitable than another. As the procedure is performed under fluoroscopy, the third step is to become familiarized with the fluoroscopic appearance of both the SHV and THV. This helps to determine the landmarks for optimal positioning, which in turn determines the gradients and fixation. The fourth step is to assess the risk of coronary obstruction. This is performed with either aortic root angiography or ECG-gated computerised tomography (CT). Finally, the route of approach must be carefully planned. Once these aspects are addressed, the procedure can be performed efficiently with a low risk of complications. PMID:29062752

Developing Poultry Facility Type Information from USDA Agricultural Census Data for Use in Epidemiological and Economic Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Melius, C

2007-12-05

The epidemiological and economic modeling of poultry diseases requires knowing the size, location, and operational type of each poultry type operation within the US. At the present time, the only national database of poultry operations that is available to the general public is the USDA's 2002 Agricultural Census data, published by the National Agricultural Statistics Service, herein referred to as the 'NASS data'. The NASS data provides census data at the county level on poultry operations for various operation types (i.e., layers, broilers, turkeys, ducks, geese). However, the number of farms and sizes of farms for the various types aremore » not independent since some facilities have more than one type of operation. Furthermore, some data on the number of birds represents the number sold, which does not represent the number of birds present at any given time. In addition, any data tabulated by NASS that could identify numbers of birds or other data reported by an individual respondent is suppressed by NASS and coded with a 'D'. To be useful for epidemiological and economic modeling, the NASS data must be converted into a unique set of facility types (farms having similar operational characteristics). The unique set must not double count facilities or birds. At the same time, it must account for all the birds, including those for which the data has been suppressed. Therefore, several data processing steps are required to work back from the published NASS data to obtain a consistent database for individual poultry operations. This technical report documents data processing steps that were used to convert the NASS data into a national poultry facility database with twenty-six facility types (7 egg-laying, 6 broiler, 1 backyard, 3 turkey, and 9 others, representing ducks, geese, ostriches, emus, pigeons, pheasants, quail, game fowl breeders and 'other'). The process involves two major steps. The first step defines the rules used to estimate the data that is suppressed within the NASS database. The first step is similar to the first step used to estimate suppressed data for livestock [Melius et al (2006)]. The second step converts the NASS poultry types into the operational facility types used by the epidemiological and economic model. We also define two additional facility types for high and low risk poultry backyards, and an additional two facility types for live bird markets and swap meets. The distribution of these additional facility types among counties is based on US population census data. The algorithm defining the number of premises and the corresponding distribution among counties and the resulting premises density plots for the continental US are provided.« less

Abundance of ammonia oxidizing bacteria and archaea under long-term maize cropping systems.

USDA-ARS?s Scientific Manuscript database

Nitrification involves the oxidation of ammonium and is an important component of the overall N cycle. Nitrification occurs in two steps; first by oxidizing ammonium to nitrite, and then to nitrate. The first step is often the rate limiting step. Until recently ammonia-oxidizing bacteria were though...

Numerical modeling of regional stress distributions for geothermal exploration

NASA Astrophysics Data System (ADS)

Guillon, Theophile; Peter-Borie, Mariane; Gentier, Sylvie; Blaisonneau, Arnold

2017-04-01

Any high-enthalpy unconventional geothermal projectcan be jeopardized by the uncertainty on the presence of the geothermal resource at depth. Indeed, for the majority of such projects the geothermal resource is deeply seated and, with the drilling costs increasing accordingly, must be located as precisely as possible to increase the chance of their economic viability. In order to reduce the "geological risk", i.e., the chance to poorly locate the geothermal resource, a maximum amount of information must be gathered prior to any drilling of exploration and/or operational well. Cross-interpretation from multiple disciplines (e.g., geophysics, hydrology, geomechanics …) should improve locating the geothermal resource and so the position of exploration wells ; this is the objective of the European project IMAGE (grant agreement No. 608553), under which the work presented here was carried out. As far as geomechanics is concerned, in situ stresses can have a great impact on the presence of a geothermal resource since they condition both the regime within the rock mass, and the state of the major fault zones (and hence, the possible flow paths). In this work, we propose a geomechanical model to assess the stress distribution at the regional scale (characteristic length of 100 kilometers). Since they have a substantial impact on the stress distributions and on the possible creation of regional flow paths, the major fault zones are explicitly taken into account. The Distinct Element Method is used, where the medium is modeled as fully deformable blocks representing the rock mass interacting through mechanically active joints depicting the fault zones. The first step of the study is to build the model geometry based on geological and geophysical evidences. Geophysical and structural geology results help positioning the major fault zones in the first place. Then, outcrop observations, structural models and site-specific geological knowledge give information on the fault zones family sets and their priority rule. In the second step, the physical model must be established, including constitutive equations for the rock mass and the fault zones, initial state and boundary conditions. At such large scales, physical laws and parameters are difficult to assess and must be constrained by sensitivity analysis. In the last step of the study, the results can be interpreted to highlight areas where the mechanical conditions favor the presence of a geothermal resource. The DEM enables accounting for the strong stress redistributions inherent to highly-segmented geometries, and to the dilational opening of fault zones under shearing. A 130x150 square-kilometers region within the Upper Rhine Graben is used as a case-study to illustrate the building and interpretation of a regional stress model.

Biochemical Kinetics Model of DSB Repair and GammaH2AX FOCI by Non-homologous End Joining

NASA Technical Reports Server (NTRS)

Cucinotta, Francis, A.; Pluth, Janice M.; Anderson, Jennifer A.; Harper, Jane V.; O'Neill, Peter

2007-01-01

We developed a biochemical kinetics approach to describe the repair of double strand breaks (DSB) produced by low LET radiation by modeling molecular events associated with the mechanisms of non-homologous end-joining (NHEJ). A system of coupled non-linear ordinary differential equations describes the induction of DSB and activation pathways for major NHEJ components including Ku(sub 70/80), DNA-PK(sub cs), and the Ligase IV-XRCC4 hetero-dimer. The autophosphorylation of DNA-PK(sub cs and subsequent induction of gamma-H2AX foci observed after ionizing radiation exposure were modeled. A two-step model of DNA-PK(sub cs) regulation of repair was developed with the initial step allowing access of other NHEJ components to breaks, and a second step limiting access to Ligase IV-XRCC4. Our model assumes that the transition from the first to second-step depends on DSB complexity, with a much slower-rate for complex DSB. The model faithfully reproduced several experimental data sets, including DSB rejoining as measured by pulsed-field electrophoresis (PFGE), quantification of the induction of gamma-H2AX foci, and live cell imaging of the induction of Ku(sub 70/80). Predictions are made for the behaviors of NHEJ components at low doses and dose-rates, where a steady-state is found at dose-rates of 0.1 Gy/hr or lower.

Molecular detection assay of five Salmonella serotypes of public interest: Typhimurium, Enteritidis, Newport, Heidelberg, and Hadar.

PubMed

Bugarel, M; Tudor, A; Loneragan, G H; Nightingale, K K

2017-03-01

Foodborne illnesses due to Salmonella represent an important public-health concern worldwide. In the United States, a majority of Salmonella infections are associated with a small number of serotypes. Furthermore, some serotypes that are overrepresented among human disease are also associated with multi-drug resistance phenotypes. Rapid detection of serotypes of public-health concern might help reduce the burden of salmonellosis cases and limit exposure to multi-drug resistant Salmonella. We developed a two-step real-time PCR-based rapid method for the identification and detection of five Salmonella serotypes that are either overrepresented in human disease or frequently associated with multi-drug resistance, including serotypes Enteritidis, Typhimurium, Newport, Hadar, and Heidelberg. Two sets of four markers were developed to detect and differentiate the five serotypes. The first set of markers was developed as a screening step to detect the five serotypes; whereas, the second set was used to further distinguish serotypes Heidelberg, Newport and Hadar. The utilization of these markers on a two-step investigation strategy provides a diagnostic specificity of 97% for the detection of Typhimurium, Enteritidis, Heidelberg, Infantis, Newport and Hadar. The diagnostic sensitivity of the detection makers is >96%. The availability of this two-step rapid method will facilitate specific detection of Salmonella serotypes that contribute to a significant proportion of human disease and carry antimicrobial resistance. Published by Elsevier B.V.

A New Insight into the Mechanism of NADH Model Oxidation by Metal Ions in Non-Alkaline Media.

PubMed

Yang, Jin-Dong; Chen, Bao-Long; Zhu, Xiao-Qing

2018-06-11

For a long time, it has been controversial that the three-step (e-H+-e) or two-step (e-H•) mechanism was used for the oxidations of NADH and its models by metal ions in non-alkaline media. The latter mechanism has been accepted by the majority of researchers. In this work, 1-benzyl-1,4-dihydronicotinamide (BNAH) and 1-phenyl-l,4-dihydronicotinamide (PNAH) are used as NADH models, and ferrocenium (Fc+) metal ion as an electron acceptor. The kinetics for oxidations of the NADH models by Fc+ in pure acetonitrile were monitored by using UV-Vis absorption and quadratic relationship between of kobs and the concentrations of NADH models were found for the first time. The rate expression of the reactions developed according to the three-step mechanism is quite consistent with the quadratic curves. The rate constants, thermodynamic driving forces and KIEs of each elementary step for the reactions were estimated. All the results supported the three-step mechanism. The intrinsic kinetic barriers of the proton transfer from BNAH+• to BNAH and the hydrogen atom transfer from BNAH+• to BNAH+• were estimated, the results showed that the former is 11.8 kcal/mol, and the latter is larger than 24.3 kcal/mol. It is the large intrinsic kinetic barrier of the hydrogen atom transfer that makes the reactions choose the three-step rather than two-step mechanism. Further investigation of the factors affecting the intrinsic kinetic barrier of chemical reactions indicated that the large intrinsic kinetic barrier of the hydrogen atom transfer originated from the repulsion of positive charges between BNAH+• and BNAH+•. The greatest contribution of this work is the discovery of the quadratic dependence of kobs on the concentrations of the NADH models, which is inconsistent with the conventional viewpoint of the "two-step mechanism" on the oxidations of NADH and its models by metal ions in the non-alkaline media.

International Symposium on Visually Handicapped Infants and Young Children: Birth to Seven (2nd, Aruba, 1987). "The First Steps." Proceedings = Simpasio Internacional sobre Ninos Visualmente Deficientes de Nacimiento hasta Siete Anos (2nd, Aruba, 1987). "Los Primeros Pasos."

ERIC Educational Resources Information Center

Palmer, Lillian, Ed.; And Others

This symposium focused on the special needs of visually handicapped infants and young children. Texts of 48 papers are presented, including keynote addresses by W. Aubrey Webson ("The First Steps") and Heather Hewitt ("First Steps--Parenting, Prevention and Programming"). Regional reports are provided for Japan, Bangladesh, the…

Performance upgrades in the EUV engineering test stand

NASA Astrophysics Data System (ADS)

Tichenor, Daniel A.; Replogle, William C.; Lee, Sang Hun; Ballard, William P.; Leung, Alvin H.; Kubiak, Glenn D.; Klebanoff, Leonard E.; Graham, Samual, Jr.; Goldsmith, John E. M.; Jefferson, Karen L.; Wronosky, John B.; Smith, Tony G.; Johnson, Terry A.; Shields, Harry; Hale, Layton C.; Chapman, Henry N.; Taylor, John S.; Sweeney, Donald W.; Folta, James A.; Sommargren, Gary E.; Goldberg, Kenneth A.; Naulleau, Patrick P.; Attwood, David T., Jr.; Gullikson, Eric M.

2002-07-01

The EUV Engineering Test Stand (ETS) has demonstrated the printing of 100-nm-resolution scanned images. This milestone was first achieved while the ETS operated in an initial configuration using a low power laser and a developmental projection system, PO Box 1. The drive laser has ben upgraded to a single chain of the three-chain Nd:YAG laser developed by TRW. The result in exposure time is approximately 4 seconds for static exposures. One hundred nanometer dense features have been printed in step-and-scan operation with the same image quality obtained in static printing. These experiments are the first steps toward achieving operation using all three laser chains for a total drive laser power of 1500 watts. In a second major upgrade the developmental wafer stage platen, used to demonstrate initial full-field imaging, has been replaced with the final low-expansion platen made of Zerodur. Additional improvements in the hardware and control software have demonstrated combined x and jitter from 2 to 4 nm RMS Over most of the wafer stage travel range, while scanning at the design scan speed of 10 mm/s at the wafer. This value, less than half of the originally specified jitter, provides sufficient stability to support printing of 70 nm features as planned, when the upgraded projection system is installed. The third major upgrade will replace PO Box 1 with an improved projection system, PO Box 2, having lower figure error and lower flare. In addition to these upgrades, dose sensors at the reticle and wafer planes and an EUV- sensitive aerial image monitor have been integrated into the ETS. This paper reports on ETS system upgrades and the impact on system performance.

CT-Guided Percutaneous Step-by-Step Radiofrequency Ablation for the Treatment of Carcinoma in the Caudate Lobe

PubMed Central

Dong, Jun; Li, Wang; Zeng, Qi; Li, Sheng; Gong, Xiao; Shen, Lujun; Mao, Siyue; Dong, Annan; Wu, Peihong

2015-01-01

Abstract The location of the caudate lobe and its complex anatomy make caudate lobectomy and radiofrequency ablation (RFA) under ultrasound guidance technically challenging. The objective of the exploratory study was to introduce a novel modality of treatment of lesions in caudate lobe and discuss all details with our experiences to make this novel treatment modality repeatable and educational. The study enrolled 39 patients with liver caudate lobe tumor first diagnosed by computerized tomography (CT) or magnetic resonance imaging (MRI). After consultation of multi-disciplinary team, 7 patients with hepatic caudate lobe lesions were enrolled and accepted CT-guided percutaneous step-by-step RFA treatment. A total of 8 caudate lobe lesions of the 7 patients were treated by RFA in 6 cases and RFA combined with percutaneous ethanol injection (PEI) in 1 case. Median tumor diameter was 29 mm (range, 18–69 mm). A right approach was selected for 6 patients and a dorsal approach for 1 patient. Median operative time was 64 min (range, 59–102 min). Median blood loss was 10 mL (range, 8-16 mL) and mainly due to puncture injury. Median hospitalization time was 4 days (range, 2–5 days). All lesions were completely ablated (8/8; 100%) and no recurrence at the site of previous RFA was observed during median 8 months follow-up (range 3–11 months). No major or life-threatening complications or deaths occurred. In conclusion, percutaneous step-by-step RFA under CT guidance is a novel and effective minimally invasive therapy for hepatic caudate lobe lesions with well repeatability. PMID:26426638

Full-waveform data for building roof step edge localization

NASA Astrophysics Data System (ADS)

Słota, Małgorzata

2015-08-01

Airborne laser scanning data perfectly represent flat or gently sloped areas; to date, however, accurate breakline detection is the main drawback of this technique. This issue becomes particularly important in the case of modeling buildings, where accuracy higher than the footprint size is often required. This article covers several issues related to full-waveform data registered on building step edges. First, the full-waveform data simulator was developed and presented in this paper. Second, this article provides a full description of the changes in echo amplitude, echo width and returned power caused by the presence of edges within the laser footprint. Additionally, two important properties of step edge echoes, peak shift and echo asymmetry, were noted and described. It was shown that these properties lead to incorrect echo positioning along the laser center line and can significantly reduce the edge points' accuracy. For these reasons and because all points are aligned with the center of the beam, regardless of the actual target position within the beam footprint, we can state that step edge points require geometric corrections. This article presents a novel algorithm for the refinement of step edge points. The main distinguishing advantage of the developed algorithm is the fact that none of the additional data, such as emitted signal parameters, beam divergence, approximate edge geometry or scanning settings, are required. The proposed algorithm works only on georeferenced profiles of reflected laser energy. Another major advantage is the simplicity of the calculation, allowing for very efficient data processing. Additionally, the developed method of point correction allows for the accurate determination of points lying on edges and edge point densification. For this reason, fully automatic localization of building roof step edges based on LiDAR full-waveform data with higher accuracy than the size of the lidar footprint is feasible.

Contact formation and gettering of precipitated impurities by multiple firing during semiconductor device fabrication

DOEpatents

Sopori, Bhushan

2014-05-27

Methods for contact formation and gettering of precipitated impurities by multiple firing during semiconductor device fabrication are provided. In one embodiment, a method for fabricating an electrical semiconductor device comprises: a first step that includes gettering of impurities from a semiconductor wafer and forming a backsurface field; and a second step that includes forming a front contact for the semiconductor wafer, wherein the second step is performed after completion of the first step.

Management of septic non-union of the tibia by the induced membrane technique. What factors could improve results?

PubMed

Siboni, Renaud; Joseph, Etienne; Blasco, Laurent; Barbe, Coralie; Bajolet, Odile; Diallo, Saïdou; Ohl, Xavier

2018-06-07

Management of septic non-union of the tibia requires debridement and excision of all infected bone and soft tissues. Various surgical techniques have been described to fill the bone defect. The "Induced Membrane" technique, described by A. C. Masquelet in 1986, is a two-step procedure using a PMMA cement spacer around which an induced membrane develops, to be used in the second step as a bone graft holder for the bone graft. The purpose of this study was to assess our clinical and radiological results with this technique in a series managed in our department. Nineteen traumatic septic non-unions of the tibia were included in a retrospective single-center study between November 2007 and November 2014. All patients were followed up clinically and radiologically to assess bone union time. Multivariate analysis was used to identify factors influencing union. The series comprised 4 women and 14 men (19 legs); mean age was 53.9 years. Vascularized flap transfer was required in 26% of cases before the first stage of treatment. All patients underwent a two-step procedure, with a mean interval of 7.9 weeks. Mean bone defect after the first step was 52.4mm. The bone graft was harvested from the iliac crest in the majority of cases (18/19). The bone was stabilized with an external fixator, locking plate or plaster cast after the second step. Mean follow-up was 34 months. Bony union rate was 89% (17/19), at a mean 16 months after step 2. Eleven patients underwent one or more (mean 2.1) complementary procedures. Severity of index fracture skin opening was significantly correlated with union time (Gustilo III vs. Gustilo I or II, p=0.028). A trend was found for negative impact of smoking on union (p=0.06). Bone defect size did not correlate with union rate or time. The union rate was acceptable, at 89%, but with longer union time than reported in the literature. Many factors could explain this: lack of rigid fixation after step 2 (in case of plaster cast or external fixator), or failure to cease smoking. The results showed that the induced membrane technique is effective in treating tibial septic non-union, but could be improved by stable fixation after the second step and by cessation of smoking. IV, Retrospective study. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Using a cane

MedlinePlus

... with a cane. Stepping Up or Down a Step or Curb To go up one step or a curb: Step up with your stronger leg first. Place your ... to help your balance. To go down one step or a curb: Set your cane down below ...

40 CFR 35.927-3 - Rehabilitation.

Code of Federal Regulations, 2013 CFR

2013-07-01

... minor rehabilitation concurrently with the sewer system evaluation survey in any step under a grant if... consisting of major rehabilitation work may be awarded concurrently with step 2 work for the design of the...

Examine Your Skin

MedlinePlus Videos and Cool Tools

... Suggestions Examine Your Skin Newly Diagnosed? Understanding Your Pathology Biopsy: The First Step Sentinel Node Biopsy Melanoma ... Suggestions Examine Your Skin Newly Diagnosed? Understanding Your Pathology Biopsy: The First Step Sentinel Node Biopsy Melanoma ...

Developing and Modifying Behavioral Coding Schemes in Pediatric Psychology: A Practical Guide

PubMed Central

McMurtry, C. Meghan; Chambers, Christine T.; Bakeman, Roger

2015-01-01

Objectives To provide a concise and practical guide to the development, modification, and use of behavioral coding schemes for observational data in pediatric psychology. Methods This article provides a review of relevant literature and experience in developing and refining behavioral coding schemes. Results A step-by-step guide to developing and/or modifying behavioral coding schemes is provided. Major steps include refining a research question, developing or refining the coding manual, piloting and refining the coding manual, and implementing the coding scheme. Major tasks within each step are discussed, and pediatric psychology examples are provided throughout. Conclusions Behavioral coding can be a complex and time-intensive process, but the approach is invaluable in allowing researchers to address clinically relevant research questions in ways that would not otherwise be possible. PMID:25416837

A Study to Identify the Characteristics of the Beneficiaries Residing Within the Catchment Area of Keller AMC

DTIC Science & Technology

1992-06-01

civilian providers. Morrill (1987) performed the first step of the marketing effort, which was marketing research . First, Morrill began searching for a...strategy I adopt from them is a marketing research strategy. According to Kotler and Clarke, "The marketing research process consists of five steps...and report presentation" (p. 184). My paper will follow this marketing research process. The first step of this process is covered in the statement of

Aerobic Degradation of N-Methyl-4-Nitroaniline (MNA) by Pseudomonas sp. Strain FK357 Isolated from Soil

PubMed Central

Khan, Fazlurrahman; Vyas, Bhawna; Pal, Deepika; Cameotra, Swaranjit Singh

2013-01-01

N-Methyl-4-nitroaniline (MNA) is used as an additive to lower the melting temperature of energetic materials in the synthesis of insensitive explosives. Although the biotransformation of MNA under anaerobic condition has been reported, its aerobic microbial degradation has not been documented yet. A soil microcosms study showed the efficient aerobic degradation of MNA by the inhabitant soil microorganisms. An aerobic bacterium, Pseudomonas sp. strain FK357, able to utilize MNA as the sole carbon, nitrogen, and energy source, was isolated from soil microcosms. HPLC and GC-MS analysis of the samples obtained from growth and resting cell studies showed the formation of 4-nitroaniline (4-NA), 4-aminophenol (4-AP), and 1, 2, 4-benzenetriol (BT) as major metabolic intermediates in the MNA degradation pathway. Enzymatic assay carried out on cell-free lysates of MNA grown cells confirmed N-demethylation reaction is the first step of MNA degradation with the formation of 4-NA and formaldehyde products. Flavin-dependent transformation of 4-NA to 4-AP in cell extracts demonstrated that the second step of MNA degradation is a monooxygenation. Furthermore, conversion of 4-AP to BT by MNA grown cells indicates the involvement of oxidative deamination (release of NH2 substituent) reaction in third step of MNA degradation. Subsequent degradation of BT occurs by the action of benzenetriol 1, 2-dioxygenase as reported for the degradation of 4-nitrophenol. This is the first report on aerobic degradation of MNA by a single bacterium along with elucidation of metabolic pathway. PMID:24116023

Aerobic degradation of N-methyl-4-nitroaniline (MNA) by Pseudomonas sp. strain FK357 isolated from soil.

PubMed

Khan, Fazlurrahman; Vyas, Bhawna; Pal, Deepika; Cameotra, Swaranjit Singh

2013-01-01

N-Methyl-4-nitroaniline (MNA) is used as an additive to lower the melting temperature of energetic materials in the synthesis of insensitive explosives. Although the biotransformation of MNA under anaerobic condition has been reported, its aerobic microbial degradation has not been documented yet. A soil microcosms study showed the efficient aerobic degradation of MNA by the inhabitant soil microorganisms. An aerobic bacterium, Pseudomonas sp. strain FK357, able to utilize MNA as the sole carbon, nitrogen, and energy source, was isolated from soil microcosms. HPLC and GC-MS analysis of the samples obtained from growth and resting cell studies showed the formation of 4-nitroaniline (4-NA), 4-aminophenol (4-AP), and 1, 2, 4-benzenetriol (BT) as major metabolic intermediates in the MNA degradation pathway. Enzymatic assay carried out on cell-free lysates of MNA grown cells confirmed N-demethylation reaction is the first step of MNA degradation with the formation of 4-NA and formaldehyde products. Flavin-dependent transformation of 4-NA to 4-AP in cell extracts demonstrated that the second step of MNA degradation is a monooxygenation. Furthermore, conversion of 4-AP to BT by MNA grown cells indicates the involvement of oxidative deamination (release of NH2 substituent) reaction in third step of MNA degradation. Subsequent degradation of BT occurs by the action of benzenetriol 1, 2-dioxygenase as reported for the degradation of 4-nitrophenol. This is the first report on aerobic degradation of MNA by a single bacterium along with elucidation of metabolic pathway.

Stepwise DNA Methylation Changes Are Linked to Escape from Defined Proliferation Barriers and Mammary Epithelial Cell Immortalization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Novak, Petr; Jensen, Taylor J.; Garbe, James C.

The timing and progression of DNA methylation changes during carcinogenesis are not completely understood. To develop a timeline of aberrant DNA methylation events during malignant transformation, we analyzed genome-wide DNA methylation patterns in an isogenic human mammary epithelial cell (HMEC) culture model of transformation. To acquire immortality and malignancy, the cultured finite lifespan HMEC must overcome two distinct proliferation barriers. The first barrier, stasis, is mediated by the retinoblastoma protein and can be overcome by loss of p16(INK4A) expression. HMEC that escape stasis and continue to proliferate become genomically unstable before encountering a second more stringent proliferation barrier, telomere dysfunctionmore » due to telomere attrition. Rare cells that acquire telomerase expression may escape this barrier, become immortal, and develop further malignant properties. Our analysis of HMEC transitioning from finite lifespan to malignantly transformed showed that aberrant DNA methylation changes occur in a stepwise fashion early in the transformation process. The first aberrant DNA methylation step coincides with overcoming stasis, and results in few to hundreds of changes, depending on how stasis was overcome. A second step coincides with immortalization and results in hundreds of additional DNA methylation changes regardless of the immortalization pathway. A majority of these DNA methylation changes are also found in malignant breast cancer cells. These results show that large-scale epigenetic remodeling occurs in the earliest steps of mammary carcinogenesis, temporally links DNA methylation changes and overcoming cellular proliferation barriers, and provides a bank of potential epigenetic biomarkers that mayprove useful in breast cancer risk assessment.« less

First step to reducing infection risk as a system: evaluation of infection prevention processes for 71 hospitals.

PubMed

Fakih, Mohamad G; Heavens, Michelle; Ratcliffe, Carol J; Hendrich, Ann

2013-11-01

Hospitals can better focus their efforts to prevent health care-associated infections (HAIs) if they identify specific areas for improvement. We administered a 96-question survey to infection preventionists at 71 Ascension Health hospitals to evaluate opportunities for the prevention of catheter-associated urinary tract infection, central line-associated bloodstream infection, ventilator-associated pneumonia, and surgical site infection. Seventy-one (100%) infection preventionists completed the survey. The majority of hospitals had established policies for urinary catheter placement and maintenance (55/70, 78.6%), central venous catheter maintenance (68/71, 95.8%), and care for the mechanically ventilated patient (62/66, 93.9%). However, there was variation in health care worker practice and evaluation of competencies and outcomes. When addressing device need, 55 of 71 (77.5%) hospitals used a nurse-driven evaluation of urinary catheter need, 26 of 71 (36.6%) had a team evaluation for central venous catheters on transfer out of intensive care, and 53 of 57 (93%) assessed daily ventilator support for continued need. Only 19 of 71 (26.8%) hospitals had annual nursing competencies for urinary catheter placement and maintenance, 29 of 71 (40.8%) for nursing venous catheter maintenance, and 38 of 66 (57.6%) for appropriate health care worker surgical scrubbing. We suggest evaluating infection prevention policies and practices as a first step to improvement efforts. The next steps include implementing spread of evidence-based practices, with focus on competencies and feedback on performance. Copyright © 2013 Association for Professionals in Infection Control and Epidemiology, Inc. All rights reserved.

Late Eocene obliquity domination and impact of the Eocene/Oligocene climate transition on central Asian climate at the northeastern margin of the Tibetan Plateau

NASA Astrophysics Data System (ADS)

Xiao, Guoqiao; Abels, Hemmo A.; Yao, Zhengquan; Dupont-Nivet, Guillaume; Hilgen, Frederik J.

2010-05-01

At the boundary between the Eocene and Oligocene epochs, approximately 34 million years ago (Ma), the Earth experienced a significant change from a greenhouse world to an icehouse world. The present understanding of the triggering mechanisms, processes and environmental effects of this climatic event is mostly based upon ocean sediment records and climatic modeling results. Terrestrial records of the critical interval are rare and, where available, often poorly constrained in time. Here, we present a continuous continental record (Tashan section) from the Xining basin at the northeastern edge of Tibetan Plateau, covering the period between ~35 to 33 Ma. Lithology supplemented with high-resolution magnetic susceptibility (MS), median grain size (MGS) and color reflectance (a*) records show clear Late Eocene basic cyclicity of ~3.5 m in length. Our detailed magnetostratigraphic age model indicates that this cycle was most likely forced by the 41-kyr obliquity cycle driving drier and wetter periods in northern hemisphere Asian interior climates already 1 million year before the Eocene-Oligocene Climate Transition (EOCT). Detailed comparison of the E/O boundary interval in the Tashan section with marine records show that the most pronounced lithofacies change in the Xining Basin corresponds to the first of two widely recognized steps in oxygen isotopes making up the EOCT. This first step is reported to precede the major and second step (base of the Oi-1 phase) by around 0.2 to 0.3 Myr and has recently been suggested to be mainly related to atmospheric cooling rather than ice volume growth.

Influence of gait speed on stability: recovery from anterior slips and compensatory stepping.

PubMed

Bhatt, T; Wening, J D; Pai, Y-C

2005-02-01

Falls precipitated by slipping are a major health concern, with the majority of all slip-related falls occurring during gait. Recent evidence shows that a faster and/or more anteriorly positioned center of mass (COM) is more stable against backward balance loss, and that compensatory stepping is the key to recovering stability upon balance loss. The purposes of this paper were to determine whether walking speed affected gait stability for backward balance loss at slip onset and touchdown of compensatory stepping, and whether compensatory stepping response resembled the regular gait pattern. Forty-seven young subjects were slipped unexpectedly either at a self-selected fast, natural or slow speed. Speed-related differences in stability at slip onset and touchdown of the subsequent compensatory step were analyzed using the COM position-velocity state. The results indicate that gait speed highly correlated with stability against backward balance loss at slip onset. The low COM velocity of the slow group was not sufficiently compensated for by a more anteriorly positioned COM associated with a shorter step length at slip onset. At touchdown of the compensatory step, the speed-related differences in stability diminished, due to the continued advantage of anterior COM positioning from a short compensatory step retained by the slow group, coupled with an increase in COM velocity. Compensatory step length and relative COM position altered as a function of gait speed, indicating the motor program for gait regulation may play a role in modulating the compensatory step.

Autonomy for Constellation

NASA Technical Reports Server (NTRS)

Truszkowski, Walt; Szczur, Martha R. (Technical Monitor)

2000-01-01

The newer types of space systems, which are planned for the future, are placing challenging demands for newer autonomy concepts and techniques. Motivating these challenges are resource constraints. Even though onboard computing power will surely increase in the coming years, the resource constraints associated with space-based processes will continue to be a major factor that needs to be considered when dealing with, for example, agent-based spacecraft autonomy. To realize "economical intelligence", i.e., constrained computational intelligence that can reside within a process under severe resource constraints (time, power, space, etc.), is a major goal for such space systems as the Nanosat constellations. To begin to address the new challenges, we are developing approaches to constellation autonomy with constraints in mind. Within the Agent Concepts Testbed (ACT) at the Goddard Space Flight Center we are currently developing a Nanosat-related prototype for the first of the two-step program.

Origins of multicellular evolvability in snowflake yeast

PubMed Central

Ratcliff, William C.; Fankhauser, Johnathon D.; Rogers, David W.; Greig, Duncan; Travisano, Michael

2015-01-01

Complex life has arisen through a series of ‘major transitions’ in which collectives of formerly autonomous individuals evolve into a single, integrated organism. A key step in this process is the origin of higher-level evolvability, but little is known about how higher-level entities originate and gain the capacity to evolve as an individual. Here we report a single mutation that not only creates a new level of biological organization, but also potentiates higher-level evolvability. Disrupting the transcription factor ACE2 in Saccharomyces cerevisiae prevents mother–daughter cell separation, generating multicellular ‘snowflake’ yeast. Snowflake yeast develop through deterministic rules that produce geometrically defined clusters that preclude genetic conflict and display a high broad-sense heritability for multicellular traits; as a result they are preadapted to multicellular adaptation. This work demonstrates that simple microevolutionary changes can have profound macroevolutionary consequences, and suggests that the formation of clonally developing clusters may often be the first step to multicellularity. PMID:25600558

Recovery of permittivity and depth from near-field data as a step toward infrared nanotomography.

PubMed

Govyadinov, Alexander A; Mastel, Stefan; Golmar, Federico; Chuvilin, Andrey; Carney, P Scott; Hillenbrand, Rainer

2014-07-22

The increasing complexity of composite materials structured on the nanometer scale requires highly sensitive analytical tools for nanoscale chemical identification, ideally in three dimensions. While infrared near-field microscopy provides high chemical sensitivity and nanoscopic spatial resolution in two dimensions, the quantitative extraction of material properties of three-dimensionally structured samples has not been achieved yet. Here we introduce a method to perform rapid recovery of the thickness and permittivity of simple 3D structures (such as thin films and nanostructures) from near-field measurements, and provide its first experimental demonstration. This is accomplished via a novel nonlinear invertible model of the imaging process, taking advantage of the near-field data recorded at multiple harmonics of the oscillation frequency of the near-field probe. Our work enables quantitative nanoscale-resolved optical studies of thin films, coatings, and functionalization layers, as well as the structural analysis of multiphase materials, among others. It represents a major step toward the further goal of near-field nanotomography.

Building capacity for sustainable research programmes for cancer in Africa.

PubMed

Adewole, Isaac; Martin, Damali N; Williams, Makeda J; Adebamowo, Clement; Bhatia, Kishor; Berling, Christine; Casper, Corey; Elshamy, Karima; Elzawawy, Ahmed; Lawlor, Rita T; Legood, Rosa; Mbulaiteye, Sam M; Odedina, Folakemi T; Olopade, Olufunmilayo I; Olopade, Christopher O; Parkin, Donald M; Rebbeck, Timothy R; Ross, Hana; Santini, Luiz A; Torode, Julie; Trimble, Edward L; Wild, Christopher P; Young, Annie M; Kerr, David J

2014-05-01

Cancer research in Africa will have a pivotal role in cancer control planning in this continent. However, environments (such as those in academic or clinical settings) with limited research infrastructure (laboratories, biorespositories, databases) coupled with inadequate funding and other resources have hampered African scientists from carrying out rigorous research. In September 2012, over 100 scientists with expertise in cancer research in Africa met in London to discuss the challenges in performing high-quality research, and to formulate the next steps for building sustainable, comprehensive and multi-disciplinary programmes relevant to Africa. This was the first meeting among five major organizations: the African Organisation for Research and Training in Africa (AORTIC), the Africa Oxford Cancer Foundation (AfrOx), and the National Cancer Institutes (NCI) of Brazil, France and the USA. This article summarizes the discussions and recommendations of this meeting, including the next steps required to create sustainable and impactful research programmes that will enable evidenced-based cancer control approaches and planning at the local, regional and national levels.

Moving object detection and tracking in videos through turbulent medium

NASA Astrophysics Data System (ADS)

Halder, Kalyan Kumar; Tahtali, Murat; Anavatti, Sreenatha G.

2016-06-01

This paper addresses the problem of identifying and tracking moving objects in a video sequence having a time-varying background. This is a fundamental task in many computer vision applications, though a very challenging one because of turbulence that causes blurring and spatiotemporal movements of the background images. Our proposed approach involves two major steps. First, a moving object detection algorithm that deals with the detection of real motions by separating the turbulence-induced motions using a two-level thresholding technique is used. In the second step, a feature-based generalized regression neural network is applied to track the detected objects throughout the frames in the video sequence. The proposed approach uses the centroid and area features of the moving objects and creates the reference regions instantly by selecting the objects within a circle. Simulation experiments are carried out on several turbulence-degraded video sequences and comparisons with an earlier method confirms that the proposed approach provides a more effective tracking of the targets.

Translation between representation languages

NASA Technical Reports Server (NTRS)

Vanbaalen, Jeffrey

1994-01-01

A capability for translating between representation languages is critical for effective knowledge base reuse. A translation technology for knowledge representation languages based on the use of an interlingua for communicating knowledge is described. The interlingua-based translation process consists of three major steps: translation from the source language into a subset of the interlingua, translation between subsets of the interlingua, and translation from a subset of the interlingua into the target language. The first translation step into the interlingua can typically be specified in the form of a grammar that describes how each top-level form in the source language translates into the interlingua. In cases where the source language does not have a declarative semantics, such a grammar is also a specification of a declarative semantics for the language. A methodology for building translators that is currently under development is described. A 'translator shell' based on this methodology is also under development. The shell has been used to build translators for multiple representation languages and those translators have successfully translated nontrivial knowledge bases.

Building capacity for sustainable research programmes for cancer in Africa

PubMed Central

Adewole, Isaac; Martin, Damali N.; Williams, Makeda J.; Adebamowo, Clement; Bhatia, Kishor; Berling, Christine; Casper, Corey; Elshamy, Karima; Elzawawy, Ahmed; Lawlor, Rita T.; Legood, Rosa; Mbulaiteye, Sam M.; Odedina, Folakemi T.; Olopade, Olufunmilayo I.; Olopade, Christopher O.; Parkin, Donald M.; Rebbeck, Timothy R.; Ross, Hana; Santini, Luiz A.; Torode, Julie; Trimble, Edward L.; Wild, Christopher P.; Young, Annie M.; Kerr, David J.

2015-01-01

Cancer research in Africa will have a pivotal role in cancer control planning in this continent. However, environments (such as those in academic or clinical settings) with limited research infrastructure (laboratories, biorespositories, databases) coupled with inadequate funding and other resources have hampered African scientists from carrying out rigorous research. In September 2012, over 100 scientists with expertise in cancer research in Africa met in London to discuss the challenges in performing high-quality research, and to formulate the next steps for building sustainable, comprehensive and multi-disciplinary programmes relevant to Africa. This was the first meeting among five major organizations: the African Organisation for Research and Training in Africa (AORTIC), the Africa Oxford Cancer Foundation (AfrOx), and the National Cancer Institutes (NCI) of Brazil, France and the USA. This article summarizes the discussions and recommendations of this meeting, including the next steps required to create sustainable and impactful research programmes that will enable evidenced-based cancer control approaches and planning at the local, regional and national levels. PMID:24614139

A smart technique for attendance system to recognize faces through parallelism

NASA Astrophysics Data System (ADS)

Prabhavathi, B.; Tanuja, V.; Madhu Viswanatham, V.; Rajashekhara Babu, M.

2017-11-01

Major part of recognising a person is face with the help of image processing techniques we can exploit the physical features of a person. In the old approach method that is used in schools and colleges it is there that the professor calls the student name and then the attendance for the students marked. Here in paper want to deviate from the old approach and go with the new approach by using techniques that are there in image processing. In this paper we presenting spontaneous presence for students in classroom. At first classroom image has been in use and after that image is kept in data record. For the images that are stored in the database we apply system algorithm which includes steps such as, histogram classification, noise removal, face detection and face recognition methods. So by using these steps we detect the faces and then compare it with the database. The attendance gets marked automatically if the system recognizes the faces.

An adaptive-binning method for generating constant-uncertainty/constant-significance light curves with Fermi -LAT data

DOE PAGES

Lott, B.; Escande, L.; Larsson, S.; ...

2012-07-19

Here, we present a method enabling the creation of constant-uncertainty/constant-significance light curves with the data of the Fermi-Large Area Telescope (LAT). The adaptive-binning method enables more information to be encapsulated within the light curve than with the fixed-binning method. Although primarily developed for blazar studies, it can be applied to any sources. Furthermore, this method allows the starting and ending times of each interval to be calculated in a simple and quick way during a first step. The reported mean flux and spectral index (assuming the spectrum is a power-law distribution) in the interval are calculated via the standard LATmore » analysis during a second step. In the absence of major caveats associated with this method Monte-Carlo simulations have been established. We present the performance of this method in determining duty cycles as well as power-density spectra relative to the traditional fixed-binning method.« less

Heat and Mass Transfer Model in Freeze-Dried Medium

NASA Astrophysics Data System (ADS)

Alfat, Sayahdin; Purqon, Acep

2017-07-01

There are big problems in agriculture sector every year. One of the major problems is abundance of agricultural product during the peak of harvest season that is not matched by an increase in demand of agricultural product by consumers, this causes a wasted agricultural products. Alternative way was food preservation by freeze dried method. This method was already using heat transfer through conduction and convection to reduce water quality in the food. The main objective of this research was to design a model heat and mass transfer in freeze-dried medium. We had two steps in this research, the first step was design of medium as the heat injection site and the second was simulate heat and mass transfer of the product. During simulation process, we use physical property of some agriculture product. The result will show how temperature and moisture distribution every second. The method of research use finite element method (FEM) and will be illustrated in three dimensional.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kamireddy, Srinivas Reddy; Kozliak, Evguenii I.; Tucker, Melvin

A kinetic study of acid pretreatment was conducted for sorghum non-brown mid rib (SNBMR) ( Sorghum bicolor L Moench), sorghum-brown mid rib (SBMR), sunn hemp ( Crotalaria juncea L) and kenaf ( Gossypiumhirsutum L), focusing on rates of xylose monomer and furfural formation. The kinetics was investigated using two independent variables, reaction temperature (150 and 160°C) and acid concentration (1 and 2 wt%), with a constant dry biomass loading of 10 wt% and a treatment time up to 20 min while sampling the mixture every 2 min. The experimental data were fitted using a two-step kinetic model based on irreversiblemore » pseudo first order kinetics at each step. Varied kinetic orders on the acid concentration, ranging from 0.2 to >3, were observed for both xylose and furfural formation, the values depending on the feedstock. The crystallinity index of raw biomass was shown to be a major factor influencing the rate of both xylose and furfural formation. As a result, a positive correlation was observed between the activation energy and biomass crystallinity index for xylose formation.« less

Transient transfection of mammalian cells using a violet diode laser

NASA Astrophysics Data System (ADS)

Torres-Mapa, Maria Leilani; Angus, Liselotte; Ploschner, Martin; Dholakia, Kishan; Gunn-Moore, Frank J.

2010-07-01

We demonstrate the first use of the violet diode laser for transient mammalian cell transfection. In contrast to previous studies, which showed the generation of stable cell lines over a few weeks, we develop a methodology to transiently transfect cells with an efficiency of up to ~40%. Chinese hamster ovary (CHO-K1) and human embryonic kidney (HEK293) cells are exposed to a tightly focused 405-nm laser in the presence of plasmid DNA encoding for a mitochondrial targeted red fluorescent protein. We report transfection efficiencies as a function of laser power and exposure time for our system. We also show, for the first time, that a continuous wave laser source can be successfully applied to selective gene silencing experiments using small interfering RNA. This work is a major step towards an inexpensive and portable phototransfection system.

Detection of paint polishing defects

NASA Astrophysics Data System (ADS)

Rebeggiani, S.; Wagner, M.; Mazal, J.; Rosén, B.-G.; Dahlén, M.

2018-06-01

Surface finish plays a major role on perceived product quality, and is the first thing a potential buyer sees. Today end-of-line repairs of the body of cars and trucks are inevitably to secure required surface quality. Defects that occur in the paint shop, like dust particles, are eliminated by manual sanding/polishing which lead to other types of defects when the last polishing step is not performed correctly or not fully completed. One of those defects is known as ‘polishing roses’ or holograms, which are incredibly hard to detect in artificial light but are clearly visible in sunlight. This paper will present the first tests with a measurement set-up newly developed to measure and analyse polishing roses. The results showed good correlations to human visual evaluations where repaired panels were estimated based on the defects’ intensity, severity and viewing angle.

Method and apparatus for fault tolerance

NASA Technical Reports Server (NTRS)

Masson, Gerald M. (Inventor); Sullivan, Gregory F. (Inventor)

1993-01-01

A method and apparatus for achieving fault tolerance in a computer system having at least a first central processing unit and a second central processing unit. The method comprises the steps of first executing a first algorithm in the first central processing unit on input which produces a first output as well as a certification trail. Next, executing a second algorithm in the second central processing unit on the input and on at least a portion of the certification trail which produces a second output. The second algorithm has a faster execution time than the first algorithm for a given input. Then, comparing the first and second outputs such that an error result is produced if the first and second outputs are not the same. The step of executing a first algorithm and the step of executing a second algorithm preferably takes place over essentially the same time period.

Synchrotron x-ray microtomography of the interior microstructure of chocolate

NASA Astrophysics Data System (ADS)

Lügger, Svenja K.; Wilde, Fabian; Dülger, Nihan; Reinke, Lennart M.; Kozhar, Sergii; Beckmann, Felix; Greving, Imke; Vieira, Josélio; Heinrich, Stefan; Palzer, Stefan

2016-10-01

The structure of chocolate, a multicomponent food product, was analyzed using microtomography. Chocolate consists of a semi-solid cocoa butter matrix and a dense network of suspended particles. A detailed analysis of the microstructure is needed to understand mass transport phenomena. Transport of lipids from e.g. a filling or liquid cocoa butter is responsible for major problems in the confectionery industry such as formation of chocolate bloom, which is the formation of visible white spots or a grayish haze on the chocolate surface and leads to consumer rejections and thus large sales losses for the confectionery industry. In this study it was possible to visualize the inner structure of chocolate and clearly distinguish the particles from the continuous phase by taking advantage of the high density contrast of synchrotron radiation. Consequently, particle arrangement and cracks within the sample were made visible. The cracks are several micrometers thick and propagate throughout the entire sample. Images of pure cocoa butter, chocolate without any particles, did not show any cracks and thus confirmed that cracks are a result of embedded particles. They arise during the manufacturing process. Thus, the solidification process, a critical manufacturing step, was simulated with finite element methods in order to understand crack formation during this step. The simulation showed that cracks arise because of significant contraction of cocoa butter, the matrix phase, without any major change of volume of the suspended particles. Tempering of the chocolate mass prior to solidification is another critical step for a good product quality. We found that samples which solidified in an uncontrolled manner are less homogeneous than tempered samples. In summary, our study visualized for the first time the inner microstructure of tempered and untempered cocoa butter as well as chocolate without sample destruction and revealed cracks, which might act as transport pathways.

Cost-effectiveness of a stepped-care intervention to prevent major depression in patients with type 2 diabetes mellitus and/or coronary heart disease and subthreshold depression: design of a cluster-randomized controlled trial.

PubMed

van Dijk, Susan E M; Pols, Alide D; Adriaanse, Marcel C; Bosmans, Judith E; Elders, Petra J M; van Marwijk, Harm W J; van Tulder, Maurits W

2013-05-07

Co-morbid major depression is a significant problem among patients with type 2 diabetes mellitus and/or coronary heart disease and this negatively impacts quality of life. Subthreshold depression is the most important risk factor for the development of major depression. Given the highly significant association between depression and adverse health outcomes and the limited capacity for depression treatment in primary care, there is an urgent need for interventions that successfully prevent the transition from subthreshold depression into a major depressive disorder. Nurse led stepped-care is a promising way to accomplish this. The aim of this study is to evaluate the cost-effectiveness of a nurse-led indicated stepped-care program to prevent major depression among patients with type 2 diabetes mellitus and/or coronary heart disease in primary care who also have subthreshold depressive symptoms. An economic evaluation will be conducted alongside a cluster-randomized controlled trial in approximately thirty general practices in the Netherlands. Randomization takes place at the level of participating practice nurses. We aim to include 236 participants who will either receive a nurse-led indicated stepped-care program for depressive symptoms or care as usual. The stepped-care program consists of four sequential but flexible treatment steps: 1) watchful waiting, 2) guided self-help treatment, 3) problem solving treatment and 4) referral to the general practitioner. The primary clinical outcome measure is the cumulative incidence of major depressive disorder as measured with the Mini International Neuropsychiatric Interview. Secondary outcomes include severity of depressive symptoms, quality of life, anxiety and physical outcomes. Costs will be measured from a societal perspective and include health care utilization, medication and lost productivity costs. Measurements will be performed at baseline and 3, 6, 9 and 12 months. The intervention being investigated is expected to prevent new cases of depression among people with type 2 diabetes mellitus and/or coronary heart disease and subthreshold depression, with subsequent beneficial effects on quality of life, clinical outcomes and health care costs. When proven cost-effective, the program provides a viable treatment option in the Dutch primary care system. Dutch Trial Register NTR3715.

Varieties of second modernity: the cosmopolitan turn in social and political theory and research.

PubMed

Beck, Ulrich; Grande, Edgar

2010-09-01

The theme of this special issue is the necessity of a cosmopolitan turn in social and political theory. The question at the heart of this introductory chapter takes the challenge of 'methodological cosmopolitanism', already addressed in a Special Issue on Cosmopolitan Sociology in this journal (Beck and Sznaider 2006), an important step further: How can social and political theory be opened up, theoretically as well as methodologically and normatively, to a historically new, entangled Modernity which threatens its own foundations? How can it account for the fundamental fragility, the mutability of societal dynamics (of unintended side effects, domination and power), shaped by the globalization of capital and risks at the beginning of the twenty-first century? What theoretical and methodological problems arise and how can they be addressed in empirical research? In the following, we will develop this 'cosmopolitan turn' in four steps: firstly, we present the major conceptual tools for a theory of cosmopolitan modernities; secondly, we de-construct Western modernity by using examples taken from research on individualization and risk; thirdly, we address the key problem of methodological cosmopolitanism, namely the problem of defining the appropriate unit of analysis; and finally,we discuss normative questions, perspectives, and dilemmas of a theory of cosmopolitan modernities, in particular problems of political agency and prospects of political realization.

Non-enhanced magnetic resonance imaging of the small bowel at 7 Tesla in comparison to 1.5 Tesla: First steps towards clinical application.

PubMed

Hahnemann, Maria L; Kraff, Oliver; Maderwald, Stefan; Johst, Soeren; Orzada, Stephan; Umutlu, Lale; Ladd, Mark E; Quick, Harald H; Lauenstein, Thomas C

2016-06-01

To perform non-enhanced (NE) magnetic resonance imaging (MRI) of the small bowel at 7 Tesla (7T) and to compare it with 1.5 Tesla (1.5T). Twelve healthy subjects were prospectively examined using a 1.5T and 7T MRI system. Coronal and axial true fast imaging with steady-state precession (TrueFISP) imaging and a coronal T2-weighted (T2w) half-Fourier acquisition single-shot turbo spin-echo (HASTE) sequence were acquired. Image analysis was performed by 1) visual evaluation of tissue contrast and detail detectability, 2) measurement and calculation of contrast ratios and 3) assessment of artifacts. NE MRI of the small bowel at 7T was technically feasible. In the vast majority of the cases, tissue contrast and image details were equivalent at both field strengths. At 7T, two cases revealed better detail detectability in the TrueFISP, and better contrast in the HASTE. Susceptibility artifacts and B1 inhomogeneities were significantly increased at 7T. This study provides first insights into NE ultra-high field MRI of the small bowel and may be considered an important step towards high quality T2w abdominal imaging at 7T MRI. Copyright © 2016 Elsevier Inc. All rights reserved.

One-step hydroprocessing of fatty acids into renewable aromatic hydrocarbons over Ni/HZSM-5: insights into the major reaction pathways.

PubMed

Xing, Shiyou; Lv, Pengmei; Wang, Jiayan; Fu, Junying; Fan, Pei; Yang, Lingmei; Yang, Gaixiu; Yuan, Zhenhong; Chen, Yong

2017-01-25

For high caloricity and stability in bio-aviation fuels, a certain content of aromatic hydrocarbons (AHCs, 8-25 wt%) is crucial. Fatty acids, obtained from waste or inedible oils, are a renewable and economic feedstock for AHC production. Considerable amounts of AHCs, up to 64.61 wt%, were produced through the one-step hydroprocessing of fatty acids over Ni/HZSM-5 catalysts. Hydrogenation, hydrocracking, and aromatization constituted the principal AHC formation processes. At a lower temperature, fatty acids were first hydrosaturated and then hydrodeoxygenated at metal sites to form long-chain hydrocarbons. Alternatively, the unsaturated fatty acids could be directly deoxygenated at acid sites without first being saturated. The long-chain hydrocarbons were cracked into gases such as ethane, propane, and C 6 -C 8 olefins over the catalysts' Brønsted acid sites; these underwent Diels-Alder reactions on the catalysts' Lewis acid sites to form AHCs. C 6 -C 8 olefins were determined as critical intermediates for AHC formation. As the Ni content in the catalyst increased, the Brønsted-acid site density was reduced due to coverage by the metal nanoparticles. Good performance was achieved with a loading of 10 wt% Ni, where the Ni nanoparticles exhibited a polyhedral morphology which exposed more active sites for aromatization.

Parent Cortisol and Family Relatedness Predict Anxious Behavior in Emerging Adults

PubMed Central

Johnson, Vanessa Kahen; Gans, Susan E.

2016-01-01

Emerging adult cortisol response during family interaction predicts change in EA anxious behavior during the transition to college (Gans & Johnson, in press). In the present study, we take an additional step toward integrating family systems research and physiology by including assessment of parent physiology. We collect salivary cortisol from parents and emerging-adults during triadic family interaction. Emerging adults (N = 101) between the ages of 17 and 19 were assessed at three time points across their first college year: the summer before college, fall and spring semesters. Two parents accompanied the emerging adult child to the summer assessment; all family members provided four saliva samples each at 20-minute intervals. Later assessments of emerging adults included measures of internalizing behaviors. Parents’ cortisol secretion patterns during family interaction predict their emerging adult child’s cortisol secretion pattern, parent perceptions of the family environment, and emerging adult children’s internalizing behavior during the college transition. Different patterns of results emerged for mothers’ and fathers’ cortisol response to family interaction, and for families with sons or with daughters. The approach taken by this study provides a first step toward understanding how interrelationships among elements of physiology and family functioning contribute to adjustment during major life transitions. PMID:27536860

Parent cortisol and family relatedness predict anxious behavior in emerging adults.

PubMed

Johnson, Vanessa Kahen; Gans, Susan E

2016-10-01

Emerging-adult cortisol response during family interaction predicts change in emerging-adult anxious behavior during the transition to college (Gans & Johnson, in press). In the present study, we take an additional step toward integrating family systems research and physiology by including assessment of parent physiology. We collect salivary cortisol from parents and emerging adults during triadic family interaction. Emerging adults (N = 101) between the ages of 17 and 19 years were assessed at 3 time points across their first college year: the summer before college and the Fall and Spring semesters. Two parents accompanied the emerging-adult child to the summer assessment; all family members provided 4 saliva samples each at 20-min intervals. Later assessments of emerging adults included measures of internalizing behaviors. Parents' cortisol secretion patterns during family interaction predict their emerging-adult children's cortisol secretion pattern, parent perceptions of the family environment, and emerging-adult children's internalizing behavior during the college transition. Different patterns of results emerged for mothers' and fathers' cortisol response to family interaction and for families with sons or with daughters. The approach taken by this study provides a first step toward understanding how interrelationships among elements of physiology and family functioning contribute to adjustment during major life transitions. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Acute migraine in the Emergency Department: extending European principles of management.

PubMed

Martelletti, Paolo; Farinelli, Ivano; Steiner, Timothy J

2008-10-01

The World Health Organization (WHO) placed migraine 19th among all causes of disability (12th in women) measured in years of healthy life lost to disability (YLD). The importance of headache disorders, particularly of the primary forms, is established by their distribution worldwide, their duration (the majority being life-long conditions) and their imposition of both disability and life-style restrictions among large numbers of people. For these reasons, headache disorders should represent a public-health priority. In the Emergency Department (ED), as elsewhere, migraine is often under-diagnosed-and under-treated when it is diagnosed. The result is likely to be failure of treatment. Particular attention to diagnosis is needed in ED patients with acute headache, since there is a higher probability of secondary headache due to underlying pathologies. According to European principles of management, acute migraine treatment generally is stepwise. Of the two main steps, the first relies on symptomatic medication, preferably NSAIDs with or without antiemetics. The second step uses specific therapies, usually triptans. Modifications to routine practice are appropriate in the ED. Parenteral administration of symptomatic therapies is a preferred first choice, whilst immediate resort to triptans may be appropriate, and achieve better outcomes, in patients with severe headache and diagnostic confirmation of migraine.

A Taxonomy of Instructional Strategies in Early Childhood Education; Toward a Developmental Theory of Instructional Design.

ERIC Educational Resources Information Center

Vance, Barbara

This paper suggests two steps in instructional deisgn for early childhood that can be derived from a recent major paper on instructional strategy taxonomy. These steps, together with the instructional design variables involved in each step, are reviewed relative to current research in child development and early education. The variables reviewed…

Step-2 Thai Medical Licensing Examination result: a follow-up study.

PubMed

Wanvarie, Samkaew; Prakunhungsit, Supavadee

2008-12-01

The Thai medical students sat for the Medical Licensing Examination of Thailand (MLET) Step 2 for the first time in 2008. This paper analysed the first batch of Ramathibodi students taking the MLET Steps 1 and 2 in 2006 and 2008 respectively. The scores from the MLET Steps1 and 2, and fifth-year cumulative grade point averages (GPAX) of 108 students were analysed. Only 6 (5.6%) students failed the MLET Step 2 examination. Students who failed the MLET Step1 were more likely to fail their MLET Step 2 (relative risk, 5.8; 95% confidence interval, 1.3-26.0). Students with low GPAX or scoring in the lowest quintile or tertile on the MLET Step1 were also at increased risk of failing the LET Step 2. The data suggest that performance on the MLET Step 1 and GPAX are important predictors of a student's chances of passing the MLET Step 2. Students with poor academic achievement or failing the MLET Step1 should be given intensive tutorials to pass the medical licensing examination.

The Inquiry Based Science and Technology Education Program (IN-STEP): The Evaluation of the First Year

ERIC Educational Resources Information Center

Corcoran, Thomas B.

2008-01-01

This is the first report on the evaluation of the Inquiry Based Science and Technology Education Program (IN-STEP), an innovative and ambitious science education initiative for lower secondary schools being undertaken by a public-private partnership in Thailand funded by MSD-Thailand, an affiliate of Merck & Co. IN-STEP is a public-private…

Taking Stock and Creating a Vision: A Middle School Community Takes the First Steps toward Creating an Accelerated School.

ERIC Educational Resources Information Center

McBride, Ron E.; Stuessy, Carol

1996-01-01

Accelerated schools strive to bring at-risk students into the educational mainstream and perform at grade level through acceleration rather than remediation. Describes four steps to initiate the accelerated process and how a Texas middle school involved all members of the school community in implementing the first two steps, taking stock and…

A First Step in Learning Analytics: Pre-Processing Low-Level Alice Logging Data of Middle School Students

ERIC Educational Resources Information Center

Werner, Linda; McDowell, Charlie; Denner, Jill

2013-01-01

Educational data mining can miss or misidentify key findings about student learning without a transparent process of analyzing the data. This paper describes the first steps in the process of using low-level logging data to understand how middle school students used Alice, an initial programming environment. We describe the steps that were…

Analysis and improved characterization of minor antioxidants from leaves of Malus doumeri using a combination of major constituents' knockout with high-performance liquid chromatography-diode array detector-quadrupole time-of-flight tandem mass spectrometry.

PubMed

Zhao, Huading; Hu, Xin; Chen, Xiaoqin; Shi, Shuyun; Jiang, Xinyu; Liang, Xuejuan; Chen, Wei; Zhang, Shuihan

2015-06-12

Due to the complexity of natural products, efficient identification of bioactive compounds, especially for minor compounds, would require a huge effort. Here, we developed an effective strategy based on combining major constituents' knockout with high-performance liquid chromatography-diode array detector-quadrupole time-of-flight tandem mass spectrometry (HPLC-DAD-QTOF-MS/MS) to comprehensively identify minor antioxidants in Malus doumeri, one of the longest known and most used tonic plant in Taiwan. First, five major compounds (I-V) in M. doumeri were knocked out by two-step stepwise high-speed countercurrent chromatography (HSCCC). Second, minor antioxidants were screened by 1,1-diphenyl-2-picrylhydrazyl radical-HPLC (DPPH-HPLC) assay. Third, structures of thirty minor antioxidants, including 11 dihydrochalcones, 4 flavanones, 3 flavonols, 2 flavones, 3 aurones and 7 phenolic acids, were unambiguously or tentatively identified by matching their characteristic UV spectra, accurate mass signals and key diagnostic fragment ions with standards or previously reported compounds. Twenty-six of them, as far as was known, were discovered from M. doumeri for the first time. The results indicated that the proposed method was a useful approach to explore minor bioactive compounds from complex natural products. Copyright © 2015 Elsevier B.V. All rights reserved.

The path to extreme violence: nazism and serial killers.

PubMed

Cotter, Philippe

2010-01-01

In people's minds, extreme violence is an enigma. The tortures inflicted on defenceless victims seem to defy reason. Yet, the fact that these incidents keep recurring is proof that there are rules governing them. It is these rules that I have attempted to isolate. We shall see that they are clearly defined and that they are to be found in individual as well as collective violence. To categorise them is the first step towards implementing preventative measures which would help to protect the rational majority from a dangerous minority. Practice and theory are inextricably linked in the analysis of "organised insanity" that is extreme violence.

The Path to Extreme Violence: Nazism and Serial Killers

PubMed Central

Cotter, Philippe

2009-01-01

In people's minds, extreme violence is an enigma. The tortures inflicted on defenceless victims seem to defy reason. Yet, the fact that these incidents keep recurring is proof that there are rules governing them. It is these rules that I have attempted to isolate. We shall see that they are clearly defined and that they are to be found in individual as well as collective violence. To categorise them is the first step towards implementing preventative measures which would help to protect the rational majority from a dangerous minority. Practice and theory are inextricably linked in the analysis of “organised insanity” that is extreme violence. PMID:20126638

ICARUS 600 ton: A status report

NASA Astrophysics Data System (ADS)

Vignoli, C.; Arneodo, F.; Badertscher, A.; Barbieri, E.; Benetti, P.; di Tigliole, A. Borio; Brunetti, R.; Bueno, A.; Calligarich, E.; Campanelli, M.; Carli, F.; Carpanese, C.; Cavalli, D.; Cavanna, F.; Cennini, P.; Centro, S.; Cesana, A.; Chen, C.; Chen, Y.; Cinquini, C.; Cline, D.; De Mitri, I.; Dolfini, R.; Favaretto, D.; Ferrari, A.; Berzolari, A. Gigli; Goudsmit, P.; He, K.; Huang, X.; Li, Z.; Lu, F.; Ma, J.; Mannocchi, G.; Mauri, F.; Mazza, D.; Mazzone, L.; Montanari, C.; Nurzia, G. P.; Otwinowski, S.; Palamara, O.; Pascoli, D.; Pepato, A.; Periale, L.; Petrera, S.; Piano-Mortari, G.; Piazzoli, A.; Picchi, P.; Pietropaolo, F.; Rancati, T.; Rappoldi, A.; Raselli, G. L.; Rebuzzi, D.; Revol, J. P.; Rico, J.; Rossella, M.; Rossi, C.; Rubbia, A.; Rubbia, C.; Sala, P.; Scannicchio, D.; Sergiampietri, F.; Suzuki, S.; Terrani, M.; Ventura, S.; Verdecchia, M.; Wang, H.; Woo, J.; Xu, G.; Xu, Z.; Zhang, C.; Zhang, Q.; Zheng, S.

2000-05-01

The goal of the ICARUS Project is the installation of a multi-kiloton LAr TPC in the underground Gran Sasso Laboratory. The programme foresees the realization of the detector in a modular way. The first step is the construction of a 600 ton module which is now at an advanced phase. It will be mounted and tested in Pavia in one year and then it will be moved to Gran Sasso for the final operation. The major cryogenic and purification systems and the mechanical components of the detector have been constructed and tested in a 10 m 3 prototype. The results of these tests are here summarized.

The Psychology of Safety

NASA Technical Reports Server (NTRS)

Anderson, Brenda Lindley

2011-01-01

Many studies of mishaps show that human error is a factor in a significant majority of accidents. Trying to decide how to change human behavior to be safer is generally the biggest challenge of any safety program. However, understanding the human psyche is the first step to changing behavior. Many studies focus on the before and after of an accident, but what about the thoughts of a person in the commission of an unsafe act? This is a less understood area. Examining it reveals why it is not well comprehended. This paper attempts to examine a part of the thought process, with an eye to helping influence people to less hurtful actions.

Selective association of a fragment of the knob protein with spectrin, actin and the red cell membrane.

PubMed

Kilejian, A; Rashid, M A; Aikawa, M; Aji, T; Yang, Y F

1991-02-01

The knob protein of Plasmodium falciparum is essential for the formation of knob-like protrusions on the host erythrocyte membrane. A functional domain of the knob protein was identified. This peptide formed stable complexes with the two major red cell skeletal proteins, spectrin and actin. When introduced into resealed normal erythrocytes, the peptide associated selectively with the cytoplasmic surface of the membrane and formed knob-like electron dense deposits. Knobs are thought to play an important role in the immunopathology of P. falciparum infections. Our findings provide a first step towards understanding the molecular basis for selective membrane changes at knobs.

[Anti-angiogenic drugs].

PubMed

Sato, Yasufumi

2010-06-01

Angiogenesis or neovascularization, the formation of neo-vessels, is a physiological phenomenon endued in vasculature, but is involved in various pathological conditions. Angiogenesis is required for tumor growth and metastasis, and thus constitutes an important target for the control of tumor progression. Indeed, the recent development of bevacizumab, a neutralizing anti-VEGF monoclonal antibody as the first anti-angiogenic drug, legalized the clinical merit of anti-angiogenesis in cancers. Thereafter, various drugs targeting VEGF-mediated signals have been developed to control tumor angiogenesis. Thus, anti-angiogenic drugs are now recognized in the clinic as a major step forward for the treatment of cancers. This review focuses on the current status of antiangiogenesis treatment in cancers.

Effective Field Theory on Manifolds with Boundary

NASA Astrophysics Data System (ADS)

Albert, Benjamin I.

In the monograph Renormalization and Effective Field Theory, Costello made two major advances in rigorous quantum field theory. Firstly, he gave an inductive position space renormalization procedure for constructing an effective field theory that is based on heat kernel regularization of the propagator. Secondly, he gave a rigorous formulation of quantum gauge theory within effective field theory that makes use of the BV formalism. In this work, we extend Costello's renormalization procedure to a class of manifolds with boundary and make preliminary steps towards extending his formulation of gauge theory to manifolds with boundary. In addition, we reorganize the presentation of the preexisting material, filling in details and strengthening the results.

The VA augmentation and switching treatments for improving depression outcomes (VAST-D) study: Rationale and design considerations.

PubMed

Mohamed, Somaia; Johnson, Gary R; Vertrees, Julia E; Guarino, Peter D; Weingart, Kimberly; Young, Ilanit Tal; Yoon, Jean; Gleason, Theresa C; Kirkwood, Katherine A; Kilbourne, Amy M; Gerrity, Martha; Marder, Stephen; Biswas, Kousick; Hicks, Paul; Davis, Lori L; Chen, Peijun; Kelada, AlexandraMary; Huang, Grant D; Lawrence, David D; LeGwin, Mary; Zisook, Sidney

2015-10-30

Because two-thirds of patients with Major Depressive Disorder do not achieve remission with their first antidepressant, we designed a trial of three "next-step" strategies: switching to another antidepressant (bupropion-SR) or augmenting the current antidepressant with either another antidepressant (bupropion-SR) or with an atypical antipsychotic (aripiprazole). The study will compare 12-week remission rates and, among those who have at least a partial response, relapse rates for up to 6 months of additional treatment. We review seven key efficacy/effectiveness design decisions in this mixed "efficacy-effectiveness" trial. Copyright © 2015. Published by Elsevier Ireland Ltd.

Potential carcinogenicity of homoisoflavanoids and flavonoids from Resina sanguinis draconis (Dracaena cinnabari Balf.).

PubMed

Vachálková, A; Novotný, L; Nejedlíková, M; Suchý, V

1995-01-01

Polarographic behavior of three homoisoflavanoids and four flavanoids isolated from the dragon's blood (Resina sanguinis draconis. Dracaena cinnabari Balf.), collected at Sokotra, was investigated in aprotic solution and an index of potential carcinogenicity tg alpha was determined. Generally, homoisoflavanoids and flavanoids were reduced in two two-electron steps, the first being reversible and the second one irreversible. The parameter tg alpha values indicated that the majority of these compounds possesses no or only marginal potential carcinogenic activity. However, it was demonstrated that some structural modifications in basic flavonoid structure lead to changed electrochemical properties and a substantial increase of derivative potential carcinogenicity.

The epidemiology of major depression in South Africa: Results from the South African Stress and Health study

PubMed Central

Tomlinson, Mark; Grimsrud, Anna T; Stein, Dan J; Williams, David R; Myer, Landon

2011-01-01

Background Mental disorders are a major contributor to the burden of disease in all regions of the world. There are limited data on the epidemiology of major depressive disorder in South Africa. Methods A nationally representative household survey was conducted between 2002 and 2004 using the World Health Organization Composite International Diagnostic Interview (CIDI) to establish a diagnosis of depression. The dataset analysed included 4 351 adult South Africans of all racial groups. Results The prevalence of major depression was 9.7% for lifetime and 4.9% for the 12 months prior to the interview. The prevalence of depression was significantly higher among females than among males. The prevalence was also higher among those with a low level of education. Over 90% of all respondents with depression reported global role impairment. Conclusion In comparison with data from other countries, South Africa has lower rates of depression than the USA but higher rates than Nigeria. The findings are broadly consistent with previous findings in South Africa. These findings are the first step in documenting a level of need for care in a context of significant under-funding of mental health services and research in South Africa PMID:19588800

Investigating the Conceptual Variation of Major Physics Textbooks

NASA Astrophysics Data System (ADS)

Stewart, John; Campbell, Richard; Clanton, Jessica

2008-04-01

The conceptual problem content of the electricity and magnetism chapters of seven major physics textbooks was investigated. The textbooks presented a total of 1600 conceptual electricity and magnetism problems. The solution to each problem was decomposed into its fundamental reasoning steps. These fundamental steps are, then, used to quantify the distribution of conceptual content among the set of topics common to the texts. The variation of the distribution of conceptual coverage within each text is studied. The variation between the major groupings of the textbooks (conceptual, algebra-based, and calculus-based) is also studied. A measure of the conceptual complexity of the problems in each text is presented.

A robust platform based on ultra-high performance liquid chromatography Quadrupole time of flight tandem mass spectrometry with a two-step data mining strategy in the investigation, classification, and identification of chlorogenic acids in Ainsliaea fragrans Champ.

PubMed

Ouyang, Hui; Li, Junmao; Wu, Bei; Zhang, Xiaoyong; Li, Yan; Yang, Shilin; He, Mingzhen; Feng, Yulin

2017-06-16

The chlorogenic acids are the major bioactive constituents of the whole plant of Ainsliaea fragrans Champ. (Xingxiang Tuerfeng). These compounds are usually present as isomeric forms in Xingxiang Tuerfeng. Therefore, an efficient approach should be developed for the rapid discovery and identification of chlorogenic acids isomers through the fragmentation pathway and rules. In this study, the collision induced dissociation tandem mass spectrometry (CID-MS/MS) fragmentation routes of chlorogenic acids were systematically investigated by UHPLC-QTOF-MS/MS in the negative ion mode using eight chlorogenic acids standards. As a result, diagnostic product ions for rapid discovery and classification of chlorogenic acids isomers were determined according to their MS/MS fragmentation patterns and intensity analysis. Based on these findings, a novel two-step data mining strategy was established. The first key step was to screen different kinds of substitution and the skeleton of the quinic acid using the characteristic product ions and neutral losses. The second key step was to screen and classify different types of chlorogenic acids using their diagnostic product ions. It was apply to the rapid investigation, classification, and identification of chlorogenic acids. And the same carbon skeletons from a complex extract of Ainsliaea fragrans Champ. were effectively identified. 88 constituents, including 14 chlorogenic acids types, were rapidly discovered and identified, and in particular, 12 types of chlorogenic acids, including p-CoQC, FQA, BQC, CQA-Glu, CFQA, p-Co-CQC, di-p-CoQC, BCQA, di-CQA-Glu, PCQA, tri-QCA, and P-di-CQA, were first discovered in Ainsliaea fragrans Champ. In conclusion, UHPLC-QTOF-MS/MS method together with a systematic two-step data mining strategy was established as a feasible, effective, and rational technique for analyzing chlorogenic acids. Additionally, this study laid a foundation for the study of the active substances and quality control of Ainsliaea fragrans Champ. Copyright © 2017 Elsevier B.V. All rights reserved.

Methods for the continuous production of plastic scintillator materials

DOEpatents

Bross, Alan; Pla-Dalmau, Anna; Mellott, Kerry

1999-10-19

Methods for producing plastic scintillating material employing either two major steps (tumble-mix) or a single major step (inline-coloring or inline-doping). Using the two step method, the polymer pellets are mixed with silicone oil, and the mixture is then tumble mixed with the dopants necessary to yield the proper response from the scintillator material. The mixture is then placed in a compounder and compounded in an inert gas atmosphere. The resultant scintillator material is then extruded and pelletized or formed. When only a single step is employed, the polymer pellets and dopants are metered into an inline-coloring extruding system. The mixture is then processed under a inert gas atmosphere, usually argon or nitrogen, to form plastic scintillator material in the form of either scintillator pellets, for subsequent processing, or as material in the direct formation of the final scintillator shape or form.

Developing and modifying behavioral coding schemes in pediatric psychology: a practical guide.

PubMed

Chorney, Jill MacLaren; McMurtry, C Meghan; Chambers, Christine T; Bakeman, Roger

2015-01-01

To provide a concise and practical guide to the development, modification, and use of behavioral coding schemes for observational data in pediatric psychology. This article provides a review of relevant literature and experience in developing and refining behavioral coding schemes. A step-by-step guide to developing and/or modifying behavioral coding schemes is provided. Major steps include refining a research question, developing or refining the coding manual, piloting and refining the coding manual, and implementing the coding scheme. Major tasks within each step are discussed, and pediatric psychology examples are provided throughout. Behavioral coding can be a complex and time-intensive process, but the approach is invaluable in allowing researchers to address clinically relevant research questions in ways that would not otherwise be possible. © The Author 2014. Published by Oxford University Press on behalf of the Society of Pediatric Psychology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Data processing has major impact on the outcome of quantitative label-free LC-MS analysis.

PubMed

Chawade, Aakash; Sandin, Marianne; Teleman, Johan; Malmström, Johan; Levander, Fredrik

2015-02-06

High-throughput multiplexed protein quantification using mass spectrometry is steadily increasing in popularity, with the two major techniques being data-dependent acquisition (DDA) and targeted acquisition using selected reaction monitoring (SRM). However, both techniques involve extensive data processing, which can be performed by a multitude of different software solutions. Analysis of quantitative LC-MS/MS data is mainly performed in three major steps: processing of raw data, normalization, and statistical analysis. To evaluate the impact of data processing steps, we developed two new benchmark data sets, one each for DDA and SRM, with samples consisting of a long-range dilution series of synthetic peptides spiked in a total cell protein digest. The generated data were processed by eight different software workflows and three postprocessing steps. The results show that the choice of the raw data processing software and the postprocessing steps play an important role in the final outcome. Also, the linear dynamic range of the DDA data could be extended by an order of magnitude through feature alignment and a charge state merging algorithm proposed here. Furthermore, the benchmark data sets are made publicly available for further benchmarking and software developments.

Low-coverage surface diffusion in complex periodic energy landscapes: Analytical solution for systems with symmetric hops and application to intercalation in topological insulators

NASA Astrophysics Data System (ADS)

Gosálvez, Miguel A.; Otrokov, Mikhail M.; Ferrando, Nestor; Ryabishchenkova, Anastasia G.; Ayuela, Andres; Echenique, Pedro M.; Chulkov, Evgueni V.

2016-02-01

This is the first of two papers that introduce a general expression for the tracer diffusivity in complex, periodic energy landscapes with M distinct hop rates in one-, two-, and three-dimensional diluted systems (low-coverage, single-tracer limit). The present report focuses on the analysis of diffusion in systems where the end sites of the hops are located symmetrically with respect to the hop origins (symmetric hops), as encountered in many ideal surfaces and bulk materials. For diffusion in two dimensions, a number of formulas are presented for complex combinations of the different hops in systems with triangular, rectangular, and square symmetry. The formulas provide values in excellent agreement with kinetic Monte Carlo simulations, concluding that the diffusion coefficient can be directly determined from the proposed expressions without performing the simulations. Based on the diffusion barriers obtained from first-principles calculations and a physically meaningful estimate of the attempt frequencies, the proposed formulas are used to analyze the diffusion of Cu, Ag, and Rb adatoms on the surface and within the van der Waals (vdW) gap of a model topological insulator, Bi2Se3 . Considering the possibility of adsorbate intercalation from the terraces to the vdW gaps at morphological steps, we infer that, at low coverage and room temperature, (i) a majority of the Rb atoms bounce back at the steps and remain on the terraces, (ii) Cu atoms mostly intercalate into the vdW gap, the remaining fraction staying at the steps, and (iii) Ag atoms essentially accumulate at the steps and gradually intercalate into the vdW gap. These conclusions are in good qualitative agreement with previous experiments. The companion report (M. A. Gosálvez et al., Phys. Rev. B, submitted] extends the present study to the description of systems that contain asymmetric hops.

Event-triggered logical flow control for comprehensive process integration of multi-step assays on centrifugal microfluidic platforms.

PubMed

Kinahan, David J; Kearney, Sinéad M; Dimov, Nikolay; Glynn, Macdara T; Ducrée, Jens

2014-07-07

The centrifugal "lab-on-a-disc" concept has proven to have great potential for process integration of bioanalytical assays, in particular where ease-of-use, ruggedness, portability, fast turn-around time and cost efficiency are of paramount importance. Yet, as all liquids residing on the disc are exposed to the same centrifugal field, an inherent challenge of these systems remains the automation of multi-step, multi-liquid sample processing and subsequent detection. In order to orchestrate the underlying bioanalytical protocols, an ample palette of rotationally and externally actuated valving schemes has been developed. While excelling with the level of flow control, externally actuated valves require interaction with peripheral instrumentation, thus compromising the conceptual simplicity of the centrifugal platform. In turn, for rotationally controlled schemes, such as common capillary burst valves, typical manufacturing tolerances tend to limit the number of consecutive laboratory unit operations (LUOs) that can be automated on a single disc. In this paper, a major advancement on recently established dissolvable film (DF) valving is presented; for the very first time, a liquid handling sequence can be controlled in response to completion of preceding liquid transfer event, i.e. completely independent of external stimulus or changes in speed of disc rotation. The basic, event-triggered valve configuration is further adapted to leverage conditional, large-scale process integration. First, we demonstrate a fluidic network on a disc encompassing 10 discrete valving steps including logical relationships such as an AND-conditional as well as serial and parallel flow control. Then we present a disc which is capable of implementing common laboratory unit operations such as metering and selective routing of flows. Finally, as a pilot study, these functions are integrated on a single disc to automate a common, multi-step lab protocol for the extraction of total RNA from mammalian cell homogenate.

Specificity of the trypanothione-dependent Leishmania major glyoxalase I: structure and biochemical comparison with the human enzyme.

PubMed

Ariza, Antonio; Vickers, Tim J; Greig, Neil; Armour, Kirsten A; Dixon, Mark J; Eggleston, Ian M; Fairlamb, Alan H; Bond, Charles S

2006-02-01

Trypanothione replaces glutathione in defence against cellular damage caused by oxidants, xenobiotics and methylglyoxal in the trypanosomatid parasites, which cause trypanosomiasis and leishmaniasis. In Leishmania major, the first step in methylglyoxal detoxification is performed by a trypanothione-dependent glyoxalase I (GLO1) containing a nickel cofactor; all other characterized eukaryotic glyoxalases use zinc. In kinetic studies L. major and human enzymes were active with methylglyoxal derivatives of several thiols, but showed opposite substrate selectivities: N1-glutathionylspermidine hemithioacetal is 40-fold better with L. major GLO1, whereas glutathione hemithioacetal is 300-fold better with human GLO1. Similarly, S-4-bromobenzylglutathionylspermidine is a 24-fold more potent linear competitive inhibitor of L. major than human GLO1 (Kis of 0.54 microM and 12.6 microM, respectively), whereas S-4-bromobenzylglutathione is >4000-fold more active against human than L. major GLO1 (Kis of 0.13 microM and >500 microM respectively). The crystal structure of L. major GLO1 reveals differences in active site architecture to both human GLO1 and the nickel-dependent Escherichia coli GLO1, including increased negative charge and hydrophobic character and truncation of a loop that may regulate catalysis in the human enzyme. These differences correlate with the differential binding of glutathione and trypanothione-based substrates, and thus offer a route to the rational design of L. major-specific GLO1 inhibitors.

Oxidation of InP nanowires: a first principles molecular dynamics study.

PubMed

Berwanger, Mailing; Schoenhalz, Aline L; Dos Santos, Cláudia L; Piquini, Paulo

2016-11-16

InP nanowires are candidates for optoelectronic applications, and as protective capping layers of III-V core-shell nanowires. Their surfaces are oxidized under ambient conditions which affects the nanowire physical properties. The majority of theoretical studies of InP nanowires, however, do not take into account the oxide layer at their surfaces. In this work we use first principles molecular dynamics electronic structure calculations to study the first steps in the oxidation process of a non-saturated InP nanowire surface as well as the properties of an already oxidized surface of an InP nanowire. Our calculations show that the O 2 molecules dissociate through several mechanisms, resulting in incorporation of O atoms into the surface layers. The results confirm the experimental observation that the oxidized layers become amorphous but the non-oxidized core layers remain crystalline. Oxygen related bonds at the oxidized layers introduce defective levels at the band gap region, with greater contributions from defects involving In-O and P-O bonds.

Remotely Sensed Quantitative Drought Risk Assessment in Vulnerable Agroecosystems

NASA Astrophysics Data System (ADS)

Dalezios, N. R.; Blanta, A.; Spyropoulos, N. V.

2012-04-01

Hazard may be defined as a potential threat to humans and their welfare and risk (or consequence) as the probability of a hazard occurring and creating loss. Drought is considered as one of the major natural hazards with significant impact to agriculture, environment, economy and society. This paper deals with drought risk assessment, which the first step designed to find out what the problems are and comprises three distinct steps, namely risk identification, risk management which is not covered in this paper, there should be a fourth step to address the need for feedback and to take post-audits of all risk assessment exercises. In particular, quantitative drought risk assessment is attempted by using statistical methods. For the qualification of drought, the Reconnaissance Drought Index (RDI) is employed, which is a new index based on hydrometeorological parameters, such as precipitation and potential evapotranspiration. The remotely sensed estimation of RDI is based on NOA-AVHRR satellite data for a period of 20 years (1981-2001). The study area is Thessaly, central Greece, which is a drought-prone agricultural region characterized by vulnerable agriculture. Specifically, the undertaken drought risk assessment processes are specified as follows: 1. Risk identification: This step involves drought quantification and monitoring based on remotely sensed RDI and extraction of several features such as severity, duration, areal extent, onset and end time. Moreover, it involves a drought early warning system based on the above parameters. 2. Risk estimation: This step includes an analysis of drought severity, frequency and their relationships. 3. Risk evaluation: This step covers drought evaluation based on analysis of RDI images before and after each drought episode, which usually lasts one hydrological year (12month). The results of these three-step drought assessment processes are considered quite satisfactory in a drought-prone region such as Thessaly in central Greece. Moreover, remote sensing has proven very effective in delineating spatial variability and features in drought monitoring and assessment.

Incentivising innovation in antibiotic drug discovery and development: progress, challenges and next steps

PubMed Central

Simpkin, Victoria L; Renwick, Matthew J; Kelly, Ruth; Mossialos, Elias

2017-01-01

Political momentum and funding for combatting antimicrobial resistance (AMR) continues to build. Numerous major international and national initiatives aimed at financially incentivising the research and development (R&D) of antibiotics have been implemented. However, it remains unclear how to effectively strengthen the current set of incentive programmes to further accelerate antibiotic innovation. Based on a literature review and expert input, this study first identifies and assesses the major international, European Union, US and UK antibiotic R&D funding programmes. These programmes are then evaluated across market and public health criteria necessary for comprehensively improving the antibiotic market. The current set of incentive programmes are an important initial step to improving the economic feasibility of antibiotic development. However, there appears to be a lack of global coordination across all initiatives, which risks duplicating efforts, leaving funding gaps in the value chain and overlooking important AMR goals. This study finds that incentive programmes are overly committed to early-stage push funding of basic science and preclinical research, while there is limited late-stage push funding of clinical development. Moreover, there are almost no pull incentives to facilitate transition of antibiotic products from early clinical phases to commercialisation, focus developer concentration on the highest priority antibiotics and attract large pharmaceutical companies to invest in the market. Finally, it seems that antibiotic sustainability and patient access requirements are poorly integrated into the array of incentive mechanisms. PMID:29089600

Incentivising innovation in antibiotic drug discovery and development: progress, challenges and next steps.

PubMed

Simpkin, Victoria L; Renwick, Matthew J; Kelly, Ruth; Mossialos, Elias

2017-12-01

Political momentum and funding for combatting antimicrobial resistance (AMR) continues to build. Numerous major international and national initiatives aimed at financially incentivising the research and development (R&D) of antibiotics have been implemented. However, it remains unclear how to effectively strengthen the current set of incentive programmes to further accelerate antibiotic innovation. Based on a literature review and expert input, this study first identifies and assesses the major international, European Union, US and UK antibiotic R&D funding programmes. These programmes are then evaluated across market and public health criteria necessary for comprehensively improving the antibiotic market. The current set of incentive programmes are an important initial step to improving the economic feasibility of antibiotic development. However, there appears to be a lack of global coordination across all initiatives, which risks duplicating efforts, leaving funding gaps in the value chain and overlooking important AMR goals. This study finds that incentive programmes are overly committed to early-stage push funding of basic science and preclinical research, while there is limited late-stage push funding of clinical development. Moreover, there are almost no pull incentives to facilitate transition of antibiotic products from early clinical phases to commercialisation, focus developer concentration on the highest priority antibiotics and attract large pharmaceutical companies to invest in the market. Finally, it seems that antibiotic sustainability and patient access requirements are poorly integrated into the array of incentive mechanisms.

Initial steps of the peroxidase-catalyzed polymerization of coniferyl alcohol and/or sinapyl aldehyde: capillary zone electrophoresis study of pH effect.

PubMed

Fournand, David; Cathala, Bernard; Lapierre, Catherine

2003-01-01

Capillary zone electrophoresis has been used to monitor the first steps of the dehydrogenative polymerization of coniferyl alcohol, sinapyl aldehyde, or a mixture of both, catalyzed by the horseradish peroxidase (HRP)-H(2)O(2) system. When coniferyl alcohol was the unique HRP substrate, three major dimers were observed (beta-5, beta-beta, and beta-O-4 interunit linkages) and their initial formation velocity as well as their relative abundance varied with pH. The beta-O-4 interunit linkage was thus slightly favored at lower pH values. In contrast, sinapyl aldehyde turned out to be a very poor substrate for HRP except in basic conditions (pH 8). The major dimer observed was the beta,beta'-di-sinapyl aldehyde, a red-brown exhibiting compound which might partly participate in the red coloration usually observed in cinnamyl alcohol dehydrogenase-deficient angiosperms. Finally, when a mixture of coniferyl alcohol and sinapyl aldehyde was used, it looked as if sinapyl aldehyde became a very good substrate for HRP. Indeed, coniferyl alcohol turned out to serve as a redox mediator (i.e. "shuttle oxidant") for the sinapyl aldehyde incorporation in the lignin-like polymer. This means that in particular conditions the specificity of oxidative enzymes might not hinder the incorporation of poor substrates into the growing lignin polymer.

Shigella Diversity and Changing Landscape: Insights for the Twenty-First Century

PubMed Central

Anderson, Mark; Sansonetti, Philippe J.; Marteyn, Benoit S.

2016-01-01

Shigella is a pathovar of Escherichia coli comprising four groups, Shigella flexneri, Shigella sonnei, Shigella dysenteriae, and Shigella boydii, each of them, with the exception of S.sonnei, comprising several serotypes. Shigella accounts for the majority of dysentery causing infections occurring world-wide each year. Recent advancements in the Shigella field have led to a better understanding of the molecular mechanisms underlying host epithelial cell invasion and immune cell function manipulation, mainly using S. flexneri as a model. Host-cell invasion is the final step of the infection process, as Shigella's virulence strategy relies also on its ability to survive hostile conditions during its journey through the gastro-intestinal tract, to compete with the host microbiota and to cross the intestinal mucus layer. Hence, the diversity of the virulence strategies among the different Shigella species has not yet been deeply investigated, which might be an important step to understand the epidemiological spreading of Shigella species worldwide and a key aspect for the validation of novel vaccine candidates. The recent development of high-throughput screening and sequencing methods will facilitate these complex comparison studies. In this review we discuss several of the major avenues that the Shigella research field has taken over the past few years and hopefully gain some insights into the questions that remain surrounding this important human pathogen. PMID:27148494

Distinct motor impairments of dopamine D1 and D2 receptor knockout mice revealed by three types of motor behavior

PubMed Central

Nakamura, Toru; Sato, Asako; Kitsukawa, Takashi; Momiyama, Toshihiko; Yamamori, Tetsuo; Sasaoka, Toshikuni

2014-01-01

Both D1R and D2R knock out (KO) mice of the major dopamine receptors show significant motor impairments. However, there are some discrepant reports, which may be due to the differences in genetic background and experimental procedures. In addition, only few studies directly compared the motor performance of D1R and D2R KO mice. In this paper, we examined the behavioral difference among N10 congenic D1R and D2R KO, and wild type (WT) mice. First, we examined spontaneous motor activity in the home cage environment for consecutive 5 days. Second, we examined motor performance using the rota-rod task, a standard motor task in rodents. Third, we examined motor ability with the Step-Wheel task in which mice were trained to run in a motor-driven turning wheel adjusting their steps on foothold pegs to drink water. The results showed clear differences among the mice of three genotypes in three different types of behavior. In monitoring spontaneous motor activities, D1R and D2R KO mice showed higher and lower 24 h activities, respectively, than WT mice. In the rota-rod tasks, at a low speed, D1R KO mice showed poor performance but later improved, whereas D2R KO mice showed a good performance at early days without further improvement. When first subjected to a high speed task, the D2R KO mice showed poorer rota-rod performance at a low speed than the D1R KO mice. In the Step-Wheel task, across daily sessions, D2R KO mice increased the duration that mice run sufficiently close to the spout to drink water, and decreased time to touch the floor due to missing the peg steps and number of times the wheel was stopped, which performance was much better than that of D1R KO mice. These incongruent results between the two tasks for D1R and D2R KO mice may be due to the differences in the motivation for the rota-rod and Step-Wheel tasks, aversion- and reward-driven, respectively. The Step-Wheel system may become a useful tool for assessing the motor ability of WT and mutant mice. PMID:25076876

Development and evaluation of the content validity, practicability and feasibility of the Innovative dementia-oriented Assessment system for challenging behaviour in residents with dementia.

PubMed

Halek, Margareta; Holle, Daniela; Bartholomeyczik, Sabine

2017-08-14

One of the most difficult issues for care staff is the manifestation of challenging behaviour among residents with dementia. The first step in managing this type of behaviour is analysing its triggers. A structured assessment instrument can facilitate this process and may improve carers' management of the situation. This paper describes the development of an instrument designed for this purpose and an evaluation of its content validity and its feasibility and practicability in nursing homes. The development process and evaluation of the content validity were based on Lynn's methodology (1998). A literature review (steps 1 + 2) provided the theoretical framework for the instrument and for item formation. Ten experts (step 3) evaluated the first version of the instrument (the Innovative dementia-oriented Assessment (IdA®)) regarding its relevance, clarity, meaningfulness and completeness; content validity indices at the scale-level (S-CVI) and item-level (I-CVI) were calculated. Health care workers (step 4) evaluated the second version in a workshop. Finally, the instrument was introduced to 17 units in 11 nursing homes in a field study (step 5), and 60 care staff members assessed its practicability and feasibility. The IdA® used the need-driven dementia-compromised behaviour (NDB) model as a theoretical framework. The literature review and expert-based panel supported the content validity of the IdA®. At the item level, 77% of the ratings had a CVI greater than or equal to 0.78. The majority of the question-ratings (84%, n = 154) and answer-ratings (69%, n = 122) showed valid results, with none below 0.50. The health care workers confirmed the understandability, completeness and plausibility of the IdA®. Steps 3 and 4 led to further item clarification. The carers in the study considered the instrument helpful for reflecting challenging behaviour and beneficial for the care of residents with dementia. Negative ratings referred to the time required and the lack of effect on residents´ behaviour. There was strong evidence supporting the content validity of the IdA®. Despite the substantial length and time requirement, the instrument was considered helpful for analysing challenging behaviour. Thus, further research on the psychometric qualities, implementation aspects and effectiveness of the IdA® in understanding challenging behaviour is needed.

Distinct motor impairments of dopamine D1 and D2 receptor knockout mice revealed by three types of motor behavior.

PubMed

Nakamura, Toru; Sato, Asako; Kitsukawa, Takashi; Momiyama, Toshihiko; Yamamori, Tetsuo; Sasaoka, Toshikuni

2014-01-01

Both D1R and D2R knock out (KO) mice of the major dopamine receptors show significant motor impairments. However, there are some discrepant reports, which may be due to the differences in genetic background and experimental procedures. In addition, only few studies directly compared the motor performance of D1R and D2R KO mice. In this paper, we examined the behavioral difference among N10 congenic D1R and D2R KO, and wild type (WT) mice. First, we examined spontaneous motor activity in the home cage environment for consecutive 5 days. Second, we examined motor performance using the rota-rod task, a standard motor task in rodents. Third, we examined motor ability with the Step-Wheel task in which mice were trained to run in a motor-driven turning wheel adjusting their steps on foothold pegs to drink water. The results showed clear differences among the mice of three genotypes in three different types of behavior. In monitoring spontaneous motor activities, D1R and D2R KO mice showed higher and lower 24 h activities, respectively, than WT mice. In the rota-rod tasks, at a low speed, D1R KO mice showed poor performance but later improved, whereas D2R KO mice showed a good performance at early days without further improvement. When first subjected to a high speed task, the D2R KO mice showed poorer rota-rod performance at a low speed than the D1R KO mice. In the Step-Wheel task, across daily sessions, D2R KO mice increased the duration that mice run sufficiently close to the spout to drink water, and decreased time to touch the floor due to missing the peg steps and number of times the wheel was stopped, which performance was much better than that of D1R KO mice. These incongruent results between the two tasks for D1R and D2R KO mice may be due to the differences in the motivation for the rota-rod and Step-Wheel tasks, aversion- and reward-driven, respectively. The Step-Wheel system may become a useful tool for assessing the motor ability of WT and mutant mice.

Theoretical analysis of the effects of light intensity on the photocorrosion of semiconductor electrodes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benito, R.M.; Nozik, A.J.

1985-07-18

A kinetic model was developed to describe the effects of light intensity on the photocorrosion of n-type semiconductor electrodes. The model is an extension of previous work by Gomes and co-workers that includes the possibility of multiple steps for the oxidation reaction of the reducing agent in the electrolyte. Six cases are considered where the semiconductor decomposition reaction is multistep (each step involves a hole); the oxidation reaction of the reducing agent is multistep (each step after the first involves a hole or a chemical intermediate), and the first steps of the competing oxidation reactions are reversible or irreversible. Itmore » was found, contrary to previous results, that the photostability of semiconductor electrodes could increase with increased light intensity if the desired oxidation reaction of the reducing agent in the electrolyte was multistep with the first step being reversible. 14 references, 5 figures, 1 table.« less

High mobility high efficiency organic films based on pure organic materials

DOEpatents

Salzman, Rhonda F [Ann Arbor, MI; Forrest, Stephen R [Ann Arbor, MI

2009-01-27

A method of purifying small molecule organic material, performed as a series of operations beginning with a first sample of the organic small molecule material. The first step is to purify the organic small molecule material by thermal gradient sublimation. The second step is to test the purity of at least one sample from the purified organic small molecule material by spectroscopy. The third step is to repeat the first through third steps on the purified small molecule material if the spectroscopic testing reveals any peaks exceeding a threshold percentage of a magnitude of a characteristic peak of a target organic small molecule. The steps are performed at least twice. The threshold percentage is at most 10%. Preferably the threshold percentage is 5% and more preferably 2%. The threshold percentage may be selected based on the spectra of past samples that achieved target performance characteristics in finished devices.

Walk This Way: Detailed Steps for Transferring Born-Digital Content from Media You Can Read In-House

ERIC Educational Resources Information Center

Barrera-Gomez, Julianna; Erway, Ricky

2013-01-01

This document is a companion to the report, "You've Got to Walk before You Can Run: First Steps for Managing Born-Digital Content Received on Physical Media." Like the "First Steps" report, the intended audience is those who are just starting to manage born-digital materials, from those wondering where to begin, to those who…

Frequency-velocity mismatch: a fundamental abnormality in parkinsonian gait.

PubMed

Cho, Catherine; Kunin, Mikhail; Kudo, Koji; Osaki, Yasuhiro; Olanow, C Warren; Cohen, Bernard; Raphan, Theodore

2010-03-01

Gait dysfunction and falling are major sources of disability for patients with advanced Parkinson's disease (PD). It is presently thought that the fundamental defect is an inability to generate normal stride length. Our data suggest, however, that the basic problem in PD gait is an impaired ability to match step frequency to walking velocity. In this study, foot movements of PD and normal subjects were monitored with an OPTOTRAK motion-detection system while they walked on a treadmill at different velocities. PD subjects were also paced with auditory stimuli at different frequencies. PD gait was characterized by step frequencies that were faster and stride lengths that were shorter than those of normal controls. At low walking velocities, PD stepping had a reduced or absent terminal toe lift, which truncated swing phases, producing shortened steps. Auditory pacing was not able to normalize step frequency at these lower velocities. Peak forward toe velocities increased with walking velocity and PD subjects could initiate appropriate foot dynamics during initial phases of the swing. They could not control the foot appropriately in terminal phases, however. Increased treadmill velocity, which matched the natural PD step frequency, generated a second toe lift, normalizing step size. Levodopa increased the bandwidth of step frequencies, but was not as effective as increases in walking velocity in normalizing gait. We postulate that the inability to control step frequency and adjust swing phase dynamics to slower walking velocities are major causes for the gait impairment in PD.

Frequency-Velocity Mismatch: A Fundamental Abnormality in Parkinsonian Gait

PubMed Central

Kunin, Mikhail; Kudo, Koji; Osaki, Yasuhiro; Olanow, C. Warren; Cohen, Bernard; Raphan, Theodore

2010-01-01

Gait dysfunction and falling are major sources of disability for patients with advanced Parkinson's disease (PD). It is presently thought that the fundamental defect is an inability to generate normal stride length. Our data suggest, however, that the basic problem in PD gait is an impaired ability to match step frequency to walking velocity. In this study, foot movements of PD and normal subjects were monitored with an OPTOTRAK motion-detection system while they walked on a treadmill at different velocities. PD subjects were also paced with auditory stimuli at different frequencies. PD gait was characterized by step frequencies that were faster and stride lengths that were shorter than those of normal controls. At low walking velocities, PD stepping had a reduced or absent terminal toe lift, which truncated swing phases, producing shortened steps. Auditory pacing was not able to normalize step frequency at these lower velocities. Peak forward toe velocities increased with walking velocity and PD subjects could initiate appropriate foot dynamics during initial phases of the swing. They could not control the foot appropriately in terminal phases, however. Increased treadmill velocity, which matched the natural PD step frequency, generated a second toe lift, normalizing step size. Levodopa increased the bandwidth of step frequencies, but was not as effective as increases in walking velocity in normalizing gait. We postulate that the inability to control step frequency and adjust swing phase dynamics to slower walking velocities are major causes for the gait impairment in PD. PMID:20042701

Adsorption process to recover hydrogen from feed gas mixtures having low hydrogen concentration

DOEpatents

Golden, Timothy Christopher; Weist, Jr., Edward Landis; Hufton, Jeffrey Raymond; Novosat, Paul Anthony

2010-04-13

A process for selectively separating hydrogen from at least one more strongly adsorbable component in a plurality of adsorption beds to produce a hydrogen-rich product gas from a low hydrogen concentration feed with a high recovery rate. Each of the plurality of adsorption beds subjected to a repetitive cycle. The process comprises an adsorption step for producing the hydrogen-rich product from a feed gas mixture comprising 5% to 50% hydrogen, at least two pressure equalization by void space gas withdrawal steps, a provide purge step resulting in a first pressure decrease, a blowdown step resulting in a second pressure decrease, a purge step, at least two pressure equalization by void space gas introduction steps, and a repressurization step. The second pressure decrease is at least 2 times greater than the first pressure decrease.

Disruption of striatal-enriched protein tyrosine phosphatase (STEP) function in neuropsychiatric disorders

PubMed Central

Karasawa, Takatoshi; Lombroso, Paul J.

2014-01-01

Striatal-enriched protein tyrosine phosphatase (STEP) is a brain-specific tyrosine phosphatase that plays a major role in the development of synaptic plasticity. Recent findings have implicated STEP in several psychiatric and neurological disorders, including Alzheimer’s disease, schizophrenia, fragile X syndrome, Huntington’s disease, stroke/ischemia, and stress-related psychiatric disorders. In these disorders, STEP protein expression levels and activity are dysregulated, contributing to the cognitive deficits that are present. In this review, we focus on the most recent findings on STEP, discuss how STEP expression and activity are maintained during normal cognitive function, and how disruptions in STEP activity contribute to a number of illnesses. PMID:25218562

Treating the Tough Adolescent: A Family-Based, Step-by-Step Guide. The Guilford Family Therapy Series.

ERIC Educational Resources Information Center

Sells, Scott P.

A model for treating difficult adolescents and their families is presented. Part 1 offers six basic assumptions about the causes of severe behavioral problems and presents the treatment model with guidelines necessary to address each of these six causes. Case examples highlight and clarify major points within each of the 15 procedural steps of the…

Interference resolution in major depression.

PubMed

Joormann, Jutta; Nee, Derek Evan; Berman, Marc G; Jonides, John; Gotlib, Ian H

2010-03-01

In two experiments, we investigated individual differences in the ability to resolve interference in participants diagnosed with major depressive disorder (MDD). Participants were administered the "Ignore/Suppress" task, a short-term memory task composed of two steps. In Step 1 ("ignore"), participants were instructed to memorize a set of stimuli while ignoring simultaneously presented irrelevant material. In Step 2 ("suppress"), participants were instructed to forget a subset of the previously memorized material. The ability to resolve interference was indexed by response latencies on two recognition tasks in which participants decided whether a probe was a member of the target set. In Step 1, we compared response latencies to probes from the to-be-ignored list with response latencies to nonrecently presented items. In Step 2, we compared response latencies to probes from the to-be-suppressed list with response latencies to nonrecently presented items. The results indicate that, compared with control participants, depressed participants exhibited increased interference in the "suppress" but not in the "ignore" step of the task, when the stimuli were negative words. No group differences were obtained when we presented letters instead of emotional words. These findings indicate that depression is associated with difficulty in removing irrelevant negative material from short-term memory.

The "Aachen fall prevention App" - a Smartphone application app for the self-assessment of elderly patients at risk for ground level falls.

PubMed

Rasche, Peter; Mertens, Alexander; Bröhl, Christina; Theis, Sabine; Seinsch, Tobias; Wille, Matthias; Pape, Hans-Christoph; Knobe, Matthias

2017-01-01

Fall incidents are a major problem for patients and healthcare. The "Aachen Fall Prevention App" (AFPA) represents the first mobile Health (mHealth) application (app) empowering older patients (persons 50+ years) to self-assess and monitor their individual fall risk. Self-assessment is based on the "Aachen Fall Prevention Scale," which consists of three steps. First, patients answer ten standardized yes-no questions (positive criterion ≥ 5 "Yes" responses). Second, a ten-second test of free standing without compensatory movement is performed (positive criterion: compensatory movement). Finally, during the third step, patients rate their subjective fall risk on a 10-point Likert scale, based on the results of steps one and two. The purpose of this app is (1) to offer a low-threshold service through which individuals can independently monitor their individual fall risk and (2) to collect data about how a patient-centered mHealth app for fall risk assessment is used in the field. The results represent the first year of an ongoing field study. From December 2015 to December 2016, 197 persons downloaded the AFPA (iOS ™ and Android ™ ; free of charge). N  = 111 of these persons voluntarily shared their data and thereby participated in the field study. Data from a final number of n  = 79 persons were analyzed due to exclusion criteria (age, missing objective fall risk, missing self-assessment). The objective fall risk and the self-assessed subjective risk measured by the AFPA showed a significant positive relationship. The "Aachen Fall Prevention App" (AFPA) is an mHealth app released for iOS and Android. This field study revealed the AFPA as a promising tool to raise older adults' awareness of their individual fall risk by means of a low-threshold patient-driven fall risk assessment tool.

Mars brine formation experiment

NASA Technical Reports Server (NTRS)

Moore, Jeffrey M.; Bullock, Mark A.; Stoker, Carol R.

1993-01-01

The presence of water-soluble cations and anions in the Martian regolith has been the subject of speculation for some time. Viking lander data provided evidence for salt-cemented crusts on the Martian surface. If the crusts observed at the two Viking landing sites are, in fact, cemented by salts, and these crusts are globally widespread, as IRTM-derived thermal inertia studies of the Martian surface seem to suggest, then evaporite deposits, probably at least in part derived from brines, are a major component of the Martian regolith. The composition of liquid brines in the subsurface, which not only may be major agents of physical weathering but may also presently constitute a major deep subsurface liquid reservoir, is currently unconstrained by experimental work. A knowledge of the chemical identity and rate of production of Martian brines is a critical first-order step toward understanding the nature of both these fluids and their precipitated evaporites. Laboratory experiments are being conducted to determine the identity and production rate of water-soluble ions that form in initially pure liquid water in contact with Mars-mixture gases and unaltered Mars-analog minerals.

FROM THE HISTORY OF PHYSICS: The development of the first Soviet atomic bomb

NASA Astrophysics Data System (ADS)

Goncharov, German A.; Ryabev, Lev D.

2001-01-01

In the late 1930s and early 1940s, two remarkable physical phenomena — the fission of heavy nuclei and the chain fission reaction — were discovered, implying that a new powerful source of energy (nuclear fission energy) might become a practical possibility for mankind. At that time, however, the political situation in the world made the development of the atomic bomb the main objective of nuclear energy research in the countries involved. The first atomic bombs, notoriously used in the war against Japan, were produced by the United States of America only six and a half years after the discovery of fission. Four years later, the first Soviet atomic bomb was tested. This was a major step toward the establishment of nuclear parity which led to stability and global peace and thus greatly influenced the destiny of human kind. Based on documentary materials covering the period from 1939 to 1949, this paper traces the origin and evolution of the physical ideas behind the first Soviet atomic bomb and discusses the most important events associated with the project.

Ancient numerical daemons of conceptual hydrological modeling: 1. Fidelity and efficiency of time stepping schemes

NASA Astrophysics Data System (ADS)

Clark, Martyn P.; Kavetski, Dmitri

2010-10-01

A major neglected weakness of many current hydrological models is the numerical method used to solve the governing model equations. This paper thoroughly evaluates several classes of time stepping schemes in terms of numerical reliability and computational efficiency in the context of conceptual hydrological modeling. Numerical experiments are carried out using 8 distinct time stepping algorithms and 6 different conceptual rainfall-runoff models, applied in a densely gauged experimental catchment, as well as in 12 basins with diverse physical and hydroclimatic characteristics. Results show that, over vast regions of the parameter space, the numerical errors of fixed-step explicit schemes commonly used in hydrology routinely dwarf the structural errors of the model conceptualization. This substantially degrades model predictions, but also, disturbingly, generates fortuitously adequate performance for parameter sets where numerical errors compensate for model structural errors. Simply running fixed-step explicit schemes with shorter time steps provides a poor balance between accuracy and efficiency: in some cases daily-step adaptive explicit schemes with moderate error tolerances achieved comparable or higher accuracy than 15 min fixed-step explicit approximations but were nearly 10 times more efficient. From the range of simple time stepping schemes investigated in this work, the fixed-step implicit Euler method and the adaptive explicit Heun method emerge as good practical choices for the majority of simulation scenarios. In combination with the companion paper, where impacts on model analysis, interpretation, and prediction are assessed, this two-part study vividly highlights the impact of numerical errors on critical performance aspects of conceptual hydrological models and provides practical guidelines for robust numerical implementation.

CEF1/CDC5 alleles modulate transitions between catalytic conformations of the spliceosome

PubMed Central

Query, Charles C.; Konarska, Maria M.

2012-01-01

Conformational change within the spliceosome is required between the first and second catalytic steps of pre-mRNA splicing. A prior genetic screen for suppressors of an intron mutant that stalls between the two steps yielded both prp8 and non-prp8 alleles that suppressed second-step splicing defects. We have now identified the strongest non-prp8 suppressors as alleles of the NTC (Prp19 complex) component, CEF1. These cef1 alleles generally suppress second-step defects caused by a variety of intron mutations, mutations in U6 snRNA, or deletion of the second-step protein factor Prp17, and they can activate alternative 3′ splice sites. Genetic and functional interactions between cef1 and prp8 alleles suggest that they modulate the same event(s) in the first-to-second-step transition, most likely by stabilization of the second-step spliceosome; in contrast, alleles of U6 snRNA that also alter this transition modulate a distinct event, most likely by stabilization of the first-step spliceosome. These results implicate a myb-like domain of Cef1/CDC5 in interactions that modulate conformational states of the spliceosome and suggest that alteration of these events affects splice site use, resulting in alternative splicing-like patterns in yeast. PMID:22408182

Microphytobenthos potential productivity estimated in three tidal embayments of the San Francisco Bay system

USGS Publications Warehouse

Guarini, Jean-Marc; Cloern, James E.; Edmunds, Jody L.; Gros, Philippe

2002-01-01

In this paper we describe a three-step procedure to infer the spatial heterogeneity in microphytobenthos primary productivity at the scale of tidal estuaries and embayments. The first step involves local measurement of the carbon assimilation rate of benthic microalgae to determine the parameters of the photosynthesis-irradiance (P-E) curves (using non-linear optimization methods). In the next step, a resampling technique is used to rebuild pseudo-sampling distributions of the local productivity estimates; these provide error estimates for determining the significance level of differences between sites. The third step combines the previous results with deterministic models of tidal elevation and solar irradiance to compute mean and variance of the daily areal primary productivity over an entire intertidal mudflat area within each embayment. This scheme was applied on three different intertidal mudflat regions of the San Francisco Bay estuary during autumn 1998. Microphytobenthos productivity exhibits strong (ca. 3-fold) significant differences among the major sub-basins of San Francisco Bay. This spatial heterogeneity is attributed to two main causes: significant differences in the photosynthetic competence (P-E parameters) of the microphytobenthos in the different sub-basins, and spatial differences in the phase shifts between the tidal and solar cycles controlling the exposure of intertidal areas to sunlight. The procedure is general and can be used in other estuaries to assess the magnitude and patterns of spatial variability of microphytobenthos productivity at the level of the ecosystems.

Microphytobenthic potential productivity estimated in three tidal embayments of the San Francisco Bay: A comparative study

USGS Publications Warehouse

Guarini, J.-M.; Cloern, James E.; Edmunds, J.

2002-01-01

In this paper we describe a three-step procedure to infer the spatial heterogeneity in microphytobenthos primary productivity at the scale of tidal estuaries and embayments. The first step involves local measurement of the carbon assimilation rate of benthic microalgae to determine the parameters of the photosynthesis-irradiance (P-E) curves (using non-linear optimization methods). In the next step, a resampling technique is used to rebuild pseudo-sampling distributions of the local productivity estimates; these provide error estimates for determining the significance level of differences between sites. The third step combines the previous results with deterministic models of tidal elevation and solar irradiance to compute mean and variance of the daily areal primary productivity over an entire intertidal mudflat area within each embayment. This scheme was applied on three different intertidal mudflat regions of the San Francisco Bay estuary during autumn 1998. Microphytobenthos productivity exhibits strong (ca. 3-fold) significant differences among the major sub-basins of San Francisco Bay. This spatial heterogeneity is attributed to two main causes: significant differences in the photosynthetic competence (P-E parameters) of the microphytobenthos in the different sub-basins, and spatial differences in the phase shifts between the tidal and solar cycles controlling the exposure of intertidal areas to sunlight. The procedure is general and can be used in other estuaries to assess the magnitude and patterns of spatial variability of microphytobenthos productivity at the level of the ecosystems.

Determination of Silicon in Hydrazine

NASA Technical Reports Server (NTRS)

McClure, Mark B.; Mast, Dion; Greene, Ben; Maes, Miguel J.

2006-01-01

Inductively coupled plasma-mass spectrometry (ICP-MS) is a highly sensitive technique sometimes used for the trace determination of silicon at a mass-to-charge (m/z) ratio of 28, the most abundant natural isotope of silicon. Unfortunately, ICP-MS is unable to differentiate between other sources of m/z 28 and false positive results for silicon will result when other sources of m/z 28 are present. Nitrogen was a major source of m/z 28 and contributes to the m/z 28 signal when hydrazine sample or nitric acid preservative is introduced into the plasma. Accordingly, this work was performed to develop a sample preparation step coupled with an ICP-MS analysis that minimized non-silicon sources of m/z 28. In the preparatory step of this method, the hydrazine sample was first decomposed predominately to nitrogen gas and water with copper-catalyzed hydrogen peroxide. In the analysis step, ICP-MS was used without nitric acid preservative in samples or standards. Glass, a potential source of silicon contamination, was also avoided where possible. The method was sensitive, accurate, and reliable for the determination of silicon in monopropellant grade hydrazine (MPH) in AF-E-332 elastomer leaching tests. Results for silicon in MPH were comparable to those reported in the literature for other studies.

Conceptual design of a water treatment system to support a manned Mars colony

NASA Technical Reports Server (NTRS)

1988-01-01

The initial tasks addressed by the Prairie View A&M University team were the conceptual design of a breathable-air manufacturing system, a means of drilling for underground water, and a method for storing water for future use. Subsequently, the design objective of the team for the 1987-1988 academic year was the conceptual design of an integrated system for the supply of quality water for biological consumption, farming, residential and industrial use. The source of water for these applications is assumed to be artesian or subsurface. The first step of the project was to establish design criteria and major assumptions. The second step of the effort was to generate a block diagram of the expected treatment system and assign tasks to individual students. The list of processes for water purification and wastewater treatment given above suggests that there will be a need for on-site chemicals manufacturing for ion-exchange regeneration and disinfection. The third step of the project was to establish a basis for the design capacity of the system. A total need of 10,000 gal/day was assumed to be required. It was also assumed that 30,000 gallon raw-water intake volume is needed to produce the desired effluent volume.

Regression Trees Identify Relevant Interactions: Can This Improve the Predictive Performance of Risk Adjustment?

PubMed

Buchner, Florian; Wasem, Jürgen; Schillo, Sonja

2017-01-01

Risk equalization formulas have been refined since their introduction about two decades ago. Because of the complexity and the abundance of possible interactions between the variables used, hardly any interactions are considered. A regression tree is used to systematically search for interactions, a methodologically new approach in risk equalization. Analyses are based on a data set of nearly 2.9 million individuals from a major German social health insurer. A two-step approach is applied: In the first step a regression tree is built on the basis of the learning data set. Terminal nodes characterized by more than one morbidity-group-split represent interaction effects of different morbidity groups. In the second step the 'traditional' weighted least squares regression equation is expanded by adding interaction terms for all interactions detected by the tree, and regression coefficients are recalculated. The resulting risk adjustment formula shows an improvement in the adjusted R 2 from 25.43% to 25.81% on the evaluation data set. Predictive ratios are calculated for subgroups affected by the interactions. The R 2 improvement detected is only marginal. According to the sample level performance measures used, not involving a considerable number of morbidity interactions forms no relevant loss in accuracy. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yuan, Chris, E-mail: cyuan@uwm.edu; Wang, Endong; Zhai, Qiang

Temporal homogeneity of inventory data is one of the major problems in life cycle assessment (LCA). Addressing temporal homogeneity of life cycle inventory data is important in reducing the uncertainties and improving the reliability of LCA results. This paper attempts to present a critical review and discussion on the fundamental issues of temporal homogeneity in conventional LCA and propose a theoretical framework for temporal discounting in LCA. Theoretical perspectives for temporal discounting in life cycle inventory analysis are discussed first based on the key elements of a scientific mechanism for temporal discounting. Then generic procedures for performing temporal discounting inmore » LCA is derived and proposed based on the nature of the LCA method and the identified key elements of a scientific temporal discounting method. A five-step framework is proposed and reported in details based on the technical methods and procedures needed to perform a temporal discounting in life cycle inventory analysis. Challenges and possible solutions are also identified and discussed for the technical procedure and scientific accomplishment of each step within the framework. - Highlights: • A critical review for temporal homogeneity problem of life cycle inventory data • A theoretical framework for performing temporal discounting on inventory data • Methods provided to accomplish each step of the temporal discounting framework.« less

Endoscopic or surgical step-up approach for infected necrotising pancreatitis: a multicentre randomised trial.

PubMed

van Brunschot, Sandra; van Grinsven, Janneke; van Santvoort, Hjalmar C; Bakker, Olaf J; Besselink, Marc G; Boermeester, Marja A; Bollen, Thomas L; Bosscha, Koop; Bouwense, Stefan A; Bruno, Marco J; Cappendijk, Vincent C; Consten, Esther C; Dejong, Cornelis H; van Eijck, Casper H; Erkelens, Willemien G; van Goor, Harry; van Grevenstein, Wilhelmina M U; Haveman, Jan-Willem; Hofker, Sijbrand H; Jansen, Jeroen M; Laméris, Johan S; van Lienden, Krijn P; Meijssen, Maarten A; Mulder, Chris J; Nieuwenhuijs, Vincent B; Poley, Jan-Werner; Quispel, Rutger; de Ridder, Rogier J; Römkens, Tessa E; Scheepers, Joris J; Schepers, Nicolien J; Schwartz, Matthijs P; Seerden, Tom; Spanier, B W Marcel; Straathof, Jan Willem A; Strijker, Marin; Timmer, Robin; Venneman, Niels G; Vleggaar, Frank P; Voermans, Rogier P; Witteman, Ben J; Gooszen, Hein G; Dijkgraaf, Marcel G; Fockens, Paul

2018-01-06

Infected necrotising pancreatitis is a potentially lethal disease and an indication for invasive intervention. The surgical step-up approach is the standard treatment. A promising alternative is the endoscopic step-up approach. We compared both approaches to see whether the endoscopic step-up approach was superior to the surgical step-up approach in terms of clinical and economic outcomes. In this multicentre, randomised, superiority trial, we recruited adult patients with infected necrotising pancreatitis and an indication for invasive intervention from 19 hospitals in the Netherlands. Patients were randomly assigned to either the endoscopic or the surgical step-up approach. The endoscopic approach consisted of endoscopic ultrasound-guided transluminal drainage followed, if necessary, by endoscopic necrosectomy. The surgical approach consisted of percutaneous catheter drainage followed, if necessary, by video-assisted retroperitoneal debridement. The primary endpoint was a composite of major complications or death during 6-month follow-up. Analyses were by intention to treat. This trial is registered with the ISRCTN registry, number ISRCTN09186711. Between Sept 20, 2011, and Jan 29, 2015, we screened 418 patients with pancreatic or extrapancreatic necrosis, of which 98 patients were enrolled and randomly assigned to the endoscopic step-up approach (n=51) or the surgical step-up approach (n=47). The primary endpoint occurred in 22 (43%) of 51 patients in the endoscopy group and in 21 (45%) of 47 patients in the surgery group (risk ratio [RR] 0·97, 95% CI 0·62-1·51; p=0·88). Mortality did not differ between groups (nine [18%] patients in the endoscopy group vs six [13%] patients in the surgery group; RR 1·38, 95% CI 0·53-3·59, p=0·50), nor did any of the major complications included in the primary endpoint. In patients with infected necrotising pancreatitis, the endoscopic step-up approach was not superior to the surgical step-up approach in reducing major complications or death. The rate of pancreatic fistulas and length of hospital stay were lower in the endoscopy group. The outcome of this trial will probably result in a shift to the endoscopic step-up approach as treatment preference. The Dutch Digestive Disease Foundation, Fonds NutsOhra, and the Netherlands Organization for Health Research and Development. Copyright © 2018 Elsevier Ltd. All rights reserved.

Methods of operation of apparatus measuring formation resistivity from within a cased well having one measurement and two compensation steps

DOEpatents

Vail, III, William B.

1993-01-01

Methods of operation of an apparatus having at least two pairs of voltage measurement electrodes vertically disposed in a cased well to measure the resistivity of adjacent geological formations from inside the cased well. During stationary measurements with the apparatus at a fixed vertical depth within the cased well, the invention herein discloses methods of operation which include a measurement step and subsequent first and second compensation steps respectively resulting in improved accuracy of measurement. First and second order errors of measurement are identified, and the measurement step and two compensation steps provide methods to substantially eliminate their influence on the results. A multiple frequency apparatus adapted to movement within the well is described which simultaneously provide the measurement and two compensation steps.

Morphological evolution of TiO2 nanotube arrays with lotus-root-shaped nanostructure

NASA Astrophysics Data System (ADS)

Yu, Dongliang; Song, Ye; Zhu, Xufei; Yang, Ruiquan; Han, Aijun

2013-07-01

TiO2 nanotube arrays (TNAs) with lotus-root-shaped nanostructure have been fabricated by a modified two-step electrochemical anodization method. In the present work, different morphologies formed under different anodizing voltages are investigated in detail by field-emission scanning electron microscope. The results show that the concaves left by the first-step anodization can guide the uniform growth of TNAs in some degree as the second-step anodizing voltage is the same with that in the first step, however, when lower voltages are adopted in the second-step anodization, no guidance can be achieved, and different morphological TNAs with lotus-root-shaped nanostructure are fabricated. And we find that the nanotube diameters are directly proportional to the applied voltage in the second-step anodization. Furthermore, a possible mechanism for the growth of the TiO2 nanotubes with the special morphology is proposed for the first time, which depends on both the oxygen bubble mold and the viscous flow of the barrier oxide from the pore base to the pore wall.

How to Compute Electron Ionization Mass Spectra from First Principles.

PubMed

Bauer, Christoph Alexander; Grimme, Stefan

2016-06-02

The prediction of electron ionization (EI) mass spectra (MS) from first principles has been a major challenge for quantum chemistry (QC). The unimolecular reaction space grows rapidly with increasing molecular size. On the one hand, statistical models like Eyring's quasi-equilibrium theory and Rice-Ramsperger-Kassel-Marcus theory have provided valuable insight, and some predictions and quantitative results can be obtained from such calculations. On the other hand, molecular dynamics-based methods are able to explore automatically the energetically available regions of phase space and thus yield reaction paths in an unbiased way. We describe in this feature article the status of both methodologies in relation to mass spectrometry for small to medium sized molecules. We further present results obtained with the QCEIMS program developed in our laboratory. Our method, which incorporates stochastic and dynamic elements, has been a significant step toward the reliable routine calculation of EI mass spectra.

Controlled, Stepwise Reduction and Band Gap Manipulation of Graphene Oxide.

PubMed

Mathkar, Akshay; Tozier, Dylan; Cox, Paris; Ong, Peijie; Galande, Charudatta; Balakrishnan, Kaushik; Leela Mohana Reddy, Arava; Ajayan, Pulickel M

2012-04-19

Graphene oxide (GO) has drawn tremendous interest as a tunable precursor in numerous areas, due to its readily manipulable surface. However, its inhomogeneous and nonstoichiometric structure makes achieving chemical control a major challenge. Here, we present a room-temperature based, controlled method for the stepwise reduction of GO, with evidence of sequential removal of each organic moiety. By analyzing signature infrared absorption frequencies, we identify the carbonyl group as the first to be reduced, while the tertiary alcohol takes the longest to be completely removed from the GO surface. Controlled reduction allows for progressive tuning of the optical gap from 3.5 eV down to 1 eV, while XPS spectra show a concurrent increase in the C/O ratio. This study is the first step toward selectively enhancing the chemical homogeneity of GO, thus providing greater control over its structure, and elucidating the order of removal of functional groups and hydrazine-vapor reduction.

Stages as models of scene geometry.

PubMed

Nedović, Vladimir; Smeulders, Arnold W M; Redert, André; Geusebroek, Jan-Mark

2010-09-01

Reconstruction of 3D scene geometry is an important element for scene understanding, autonomous vehicle and robot navigation, image retrieval, and 3D television. We propose accounting for the inherent structure of the visual world when trying to solve the scene reconstruction problem. Consequently, we identify geometric scene categorization as the first step toward robust and efficient depth estimation from single images. We introduce 15 typical 3D scene geometries called stages, each with a unique depth profile, which roughly correspond to a large majority of broadcast video frames. Stage information serves as a first approximation of global depth, narrowing down the search space in depth estimation and object localization. We propose different sets of low-level features for depth estimation, and perform stage classification on two diverse data sets of television broadcasts. Classification results demonstrate that stages can often be efficiently learned from low-dimensional image representations.

Predicting orogenic wedge styles as a function of analogue erosion law and material softening

NASA Astrophysics Data System (ADS)

Mary, Baptiste C. L.; Maillot, Bertrand; Leroy, Yves M.

2013-10-01

The evolution of a compressive frictional wedge on a weak, frictional and planar décollement, subjected to frontal accretion, is predicted with a two step method called sequential limit analysis. The first step consists in finding, with the kinematic approach of limit analysis, the length of the active décollement and the dips of the emerging ramp and of the conjugate shear plane composing the emerging thrust fold. The second step leads to a modification of the geometry, first, because of the thrust fold development due to compression and, second, because of erosion. Erosion consists in removing periodically any material above a fictitious line at a selected slope, as done in analogue experiments. This application of sequential limit analysis generalizes the critical Coulomb wedge theory since it follows the internal deformation development. With constant frictional properties, the deformation is mostly diffuse, a succession of thrust folds being activated so that the topographic slope reaches exactly the theoretical, critical value. Frictional weakening on the ramps results in a deformation style composed of thrust sheets and horses. Applying an erosion slope at the critical topographic value leads to exhumation in the frontal, central, or rear region of the wedge depending on the erosion period and the weakening. Erosion at slopes slightly above or below the critical value results in exhumation toward the foreland or the hinterland, respectively, regardless of the erosion period. Exhumation is associated with duplexes, imbricate fans, antiformal stacks, and major backthrusting. Comparisons with sandbox experiments confirm that the thickness, dips, vergence, and exhumation of thrust sheets can be reproduced with friction and erosion parameters within realistic ranges of values.

Can fine-scale post-pollination variation of fig volatile compounds explain some steps of the temporal succession of fig wasps associated with Ficus racemosa?

NASA Astrophysics Data System (ADS)

Proffit, Magali; Bessière, Jean-Marie; Schatz, Bertrand; Hossaert-McKey, Martine

2018-07-01

Volatile organic compounds (VOCs) emitted by flowers play an essential role in mediating the attraction of pollinators. However, they also attract other species exploiting resources associated with flowers. For instance, VOCs emitted by figs play a major role in encounters between Ficus spp., their mutualistic pollinating wasps, and all the members of the community of non-pollinating fig wasps (NPFWs) that exploit the mutualistic interaction. Because pollinators might be in limited supply for a tree bearing many inflorescences, the plant might maximize its individual reproductive success by reducing the attractiveness of inflorescences once they are pollinated, so that pollinators orient only towards the tree's unpollinated figs. Changes in VOCs emission that bring this about could represent an important cue for NPFWs that exploit particular stages of fig development. In this study, by monitoring precisely the presence of fig-associated wasps on figs of F. racemosa, a common widespread fig species, we demonstrated that 4-5 days and 15 days following pollination represent two critical transitional steps in the succession of different wasp species. Then, focusing on the first one of these transitional steps, by investigating the composition of fig VOCs at receptivity and from 1 to 5 days following pollination, we detected progressive quantitative and qualitative variation of floral scent following pollination. These changes are significant at 5 days following pollination. The qualitative changes are mainly due to an increase in the relative proportions of two monoterpenes (α-pinene and limonene). These variations of the floral VOCs following pollination could explain why pollinating wasps stop visiting figs very shortly after the first pollinators enter receptive figs. They also possibly explain the succession of non-pollinating wasps on the figs following pollination.

Temperature-and field dependent characterization of a twisted stacked-tape cable

NASA Astrophysics Data System (ADS)

Barth, C.; Takayasu, M.; Bagrets, N.; Bayer, C. M.; Weiss, K.-P.; Lange, C.

2015-04-01

The twisted stacked-tape cable (TSTC) is one of the major high temperature superconductor cable concepts combining scalability, ease of fabrication and high current density making it a possible candidate as conductor for large scale magnets. To simulate the boundary conditions of such a magnets as well as the temperature dependence of TSTCs a 1.16 m long sample consisting of 40, 4 mm wide SuperPower REBCO tapes is characterized using the ‘FBI’ (force-field-current) superconductor test facility of the Institute for Technical Physics of the Karlsruhe Institute of Technology. In a first step, the magnetic background field is cycled while measuring the current carrying capabilities to determine the impact of Lorentz forces on the TSTC sample performance. In the first field cycle, the critical current of the TSTC sample is tested up to 12 T. A significant Lorentz force of up to 65.6 kN m-1 at the maximal magnetic background field of 12 T result in a 11.8% irreversible degradation of the current carrying capabilities. The degradation saturates (critical cable current of 5.46 kA at 4.2 K and 12 T background field) and does not increase in following field cycles. In a second step, the sample is characterized at different background fields (4-12 T) and surface temperatures (4.2-37.8 K) utilizing the variable temperature insert of the ‘FBI’ test facility. In a third step, the performance along the length of the sample is determined at 77 K, self-field. A 15% degradation is obtained for the central part of the sample which was within the high field region of the magnet during the in-field measurements.

Clustering of longitudinal data by using an extended baseline: A new method for treatment efficacy clustering in longitudinal data.

PubMed

Schramm, Catherine; Vial, Céline; Bachoud-Lévi, Anne-Catherine; Katsahian, Sandrine

2018-01-01

Heterogeneity in treatment efficacy is a major concern in clinical trials. Clustering may help to identify the treatment responders and the non-responders. In the context of longitudinal cluster analyses, sample size and variability of the times of measurements are the main issues with the current methods. Here, we propose a new two-step method for the Clustering of Longitudinal data by using an Extended Baseline. The first step relies on a piecewise linear mixed model for repeated measurements with a treatment-time interaction. The second step clusters the random predictions and considers several parametric (model-based) and non-parametric (partitioning, ascendant hierarchical clustering) algorithms. A simulation study compares all options of the clustering of longitudinal data by using an extended baseline method with the latent-class mixed model. The clustering of longitudinal data by using an extended baseline method with the two model-based algorithms was the more robust model. The clustering of longitudinal data by using an extended baseline method with all the non-parametric algorithms failed when there were unequal variances of treatment effect between clusters or when the subgroups had unbalanced sample sizes. The latent-class mixed model failed when the between-patients slope variability is high. Two real data sets on neurodegenerative disease and on obesity illustrate the clustering of longitudinal data by using an extended baseline method and show how clustering may help to identify the marker(s) of the treatment response. The application of the clustering of longitudinal data by using an extended baseline method in exploratory analysis as the first stage before setting up stratified designs can provide a better estimation of treatment effect in future clinical trials.

Determination of the apparent transfer coefficient for CO oxidation on Pt(poly), Pt(111), Pt(665) and Pt(332) using a potential modulation technique.

PubMed

Wang, Han-Chun; Ernst, Siegfried; Baltruschat, Helmut

2010-03-07

The apparent transfer coefficient, which gives the magnitude of the potential dependence of the electrochemical reaction rates, is the key quantity for the elucidation of electrochemical reaction mechanisms. We introduce the application of an ac method to determine the apparent transfer coefficient alpha' for the oxidation of pre-adsorbed CO at polycrystalline and single-crystalline Pt electrodes in sulfuric acid. The method allows to record alpha' quasi continuously as a function of potential (and time) in cyclic voltammetry or at a fixed potential, with the reaction rate varying with time. At all surfaces (Pt(poly), Pt(111), Pt(665), and Pt(332)) we clearly observed a transition of the apparent transfer coefficient from values around 1.5 at low potentials to values around 0.5 at higher potentials. Changes of the apparent transfer coefficients for the CO oxidation with potential were observed previously, but only from around 0.7 to values as low as 0.2. In contrast, our experimental findings completely agree with the simulation by Koper et al., J. Chem. Phys., 1998, 109, 6051-6062. They can be understood in the framework of a Langmuir-Hinshelwood mechanism. The transition occurs when the sum of the rate constants for the forward reaction (first step: potential dependent OH adsorption, second step: potential dependent oxidation of CO(ad) with OH(ad)) exceeds the rate constant for the back-reaction of the first step. We expect that the ac method for the determination of the apparent transfer coefficient, which we used here, will be of great help also in many other cases, especially under steady conditions, where the major limitations of the method are avoided.

Relevance of a subjective quality of life questionnaire for long-term homeless persons with schizophrenia.

PubMed

Girard, V; Tinland, A; Bonin, J P; Olive, F; Poule, J; Lancon, C; Apostolidis, T; Rowe, M; Greacen, T; Simeoni, M C

2017-02-17

Increasing numbers of programs are addressing the specific needs of homeless people with schizophrenia in terms of access to housing, healthcare, basic human rights and other domains. Although quality of life scales are being used to evaluate such programs, few instruments have been validated for people with schizophrenia and none for people with schizophrenia who experience major social problems such as homelessness. The aim of the present study was to validate the French version of the S-QoL a self-administered, subjective quality of life questionnaire specific to schizophrenia for people with schizophrenia who are homeless. In a two-step process, the S-QoL was first administered to two independent convenience samples of long-term homeless people with schizophrenia in Marseille, France. The objective of the first step was to analyse the psychometric properties of the S-QoL. The objective of the second step was to examine, through qualitative interviews with members of the population in question, the relevance and acceptability of the principle quality of life indicators used in the S-QoL instrument. Although the psychometric characteristics of the S-QoL were found to be globally satisfactory, from the point of view of the people being interviewed, acceptability was poor. Respondents frequently interrupted participation complaining that questionnaire items did not take into account the specific context of life on the streets. Less intrusive questions, more readily understandable vocabulary and greater relevance to subjects' living conditions are needed to improve the S-QoL questionnaire for this population. A modular questionnaire with context specific sections or specific quality of life instruments for socially excluded populations may well be the way forward.

First-Person Perspectives on Dual Diagnosis Anonymous (DDA): A Qualitative Study.

PubMed

Roush, Sean; Monica, Corbett; Carpenter-Song, Elizabeth; Drake, Robert E

2015-01-01

People with dually diagnosed substance abuse and mental illnesses often feel alienated at traditional 12-step meetings, yet they need the peer support provided by such groups. Dual Diagnosis Anonymous (DDA) is a peer-support program specifically for people with co-occurring disorders, which addresses many of the factors that members find alienating about traditional 12-step groups. This study aimed to elicit first-person perspectives on DDA. Occupational therapy students conducted 13 focus groups with 106 DDA members in three settings: the community (6 groups, n = 36), correctional facilities (5 groups, n = 53), and the state psychiatric hospital (2 groups, n = 17). Researchers inductively analyzed focus group transcripts to identify prominent themes. The vast majority of participants were between the ages of 18 and 49 (n = 87, 82.1%) and were non-Hispanic/White (n = 82, 77.4%). Most participants had been using substances for more than 10 years and had a diagnosed mental illness for more than 10 years. The most common substance of choice among those in the community and corrections setting was multiple substances, while those in the state hospital identified alcohol most often. Bipolar disorder was the most common mental illness diagnosis among participants in the state hospital, but depression and anxiety were the two most common diagnoses in the community and corrections participants. Four primary themes emerged from the qualitative analysis: (1) feeling accepted by others in the group, (2) understanding the interactive nature of dual disorders, (3) the open discussions in DDA meetings, and (4) a focus on hope and recovery from both illnesses. DDA provides a helpful alternative for individuals who do not feel comfortable at traditional 12-step groups due to their mental illness. Members value the acceptance, understanding, discussion, and hope in DDA meetings.

Failure modes and effects analysis for ocular brachytherapy.

PubMed

Lee, Yongsook C; Kim, Yongbok; Huynh, Jason Wei-Yeong; Hamilton, Russell J

The aim of the study was to identify potential failure modes (FMs) having a high risk and to improve our current quality management (QM) program in Collaborative Ocular Melanoma Study (COMS) ocular brachytherapy by undertaking a failure modes and effects analysis (FMEA) and a fault tree analysis (FTA). Process mapping and FMEA were performed for COMS ocular brachytherapy. For all FMs identified in FMEA, risk priority numbers (RPNs) were determined by assigning and multiplying occurrence, severity, and lack of detectability values, each ranging from 1 to 10. FTA was performed for the major process that had the highest ranked FM. Twelve major processes, 121 sub-process steps, 188 potential FMs, and 209 possible causes were identified. For 188 FMs, RPN scores ranged from 1.0 to 236.1. The plaque assembly process had the highest ranked FM. The majority of FMs were attributable to human failure (85.6%), and medical physicist-related failures were the most numerous (58.9% of all causes). After FMEA, additional QM methods were included for the top 10 FMs and 6 FMs with severity values > 9.0. As a result, for these 16 FMs and the 5 major processes involved, quality control steps were increased from 8 (50%) to 15 (93.8%), and major processes having quality assurance steps were increased from 2 to 4. To reduce high risk in current clinical practice, we proposed QM methods. They mainly include a check or verification of procedures/steps and the use of checklists for both ophthalmology and radiation oncology staff, and intraoperative ultrasound-guided plaque positioning for ophthalmology staff. Copyright © 2017 American Brachytherapy Society. Published by Elsevier Inc. All rights reserved.

Analysis/test correlation using VAWT-SDS on a step-relaxation test for the rotating Sandia 34 m test bed

DOE Office of Scientific and Technical Information (OSTI.GOV)

Argueello, J.G.; Dohrmann, C.R.; Carne, T.G.

The combined analysis/test effort described in this paper compares predictions with measured data from a step-relaxation test in the absence of significant wind-driven aerodynamic loading. The process described here is intended to illustrate a method for validation of time domain codes for structural analysis of wind turbine structures. Preliminary analyses were performed to investigate the transient dynamic response that the rotating Sandia 34 m Vertical Axis Wind Turbine (VAWT) would undergo when one of the two blades was excited by step-relaxation. The calculations served two purposes. The first was for pretest planning to evaluate the relative importance of the variousmore » forces that would be acting on the structure during the test and to determine if the applied force in the step-relaxation would be sufficient to produce an excitation that was distinguishable from that produced by the aerodynamic loads. The second was to provide predictions that could subsequently be compared to the data from the test. The test was carried out specifically to help in the validation of the time-domain structural dynamics code, VAWT-SDS, which predicts the dynamic response of VAWTs subject to transient events. Post-test comparisons with the data were performed and showed a qualitative agreement between pretest predictions and measured response. However, they also showed that there was significantly more damping in the measurements than included in the predictions. Efforts to resolve this difference, including post-test analyses, were undertaken and are reported herein. The overall effort described in this paper represents a major step in the process of arriving at a validated structural dynamics code.« less

Method and allocation device for allocating pending requests for data packet transmission at a number of inputs to a number of outputs of a packet switching device in successive time slots

DOEpatents

Abel, Francois [Rueschlikon, CH; Iliadis, Ilias [Rueschlikon, CH; Minkenberg, Cyriel J. A. [Adliswil, CH

2009-02-03

A method for allocating pending requests for data packet transmission at a number of inputs to a number of outputs of a switching system in successive time slots, including a matching method including the steps of providing a first request information in a first time slot indicating data packets at the inputs requesting transmission to the outputs of the switching system, performing a first step in the first time slot depending on the first request information to obtain a first matching information, providing a last request information in a last time slot successive to the first time slot, performing a last step in the last time slot depending on the last request information and depending on the first matching information to obtain a final matching information, and assigning the pending data packets at the number of inputs to the number of outputs based on the final matching information.

Electron correlations and pre-collision in the re-collision picture of high harmonic generation

NASA Astrophysics Data System (ADS)

Mašín, Zdeněk; Harvey, Alex G.; Spanner, Michael; Patchkovskii, Serguei; Ivanov, Misha; Smirnova, Olga

2018-07-01

We discuss the seminal three-step model and the re-collision picture in the context of high harmonic generation in molecules. In particular, we stress the importance of multi-electron correlation during the first and the third of the three steps of the process: (1) the strong-field ionization and (3) the recombination. We point out how an accurate account of multi-electron correlations during the third recombination step allows one to gauge the importance of pre-collision: the term coined by Eberly (n.d. private communication) to describe unusual pathways during the first, ionization, step.

Backwards Fading to Speed Task Learning

DTIC Science & Technology

2013-09-01

estimates.) Table 1 Finalized Task List Task Domain Task Name Knot Tying Hand Cuff Rappel First Aid Fracture Bleed Map Reading* Resection...materials used. Hand Cuff . There are 10 steps in this task. To complete this task, the learner must manipulate a short length of rope (e.g...Design for Experiment 1 – Step Fade Experiment 1 (Step Fade) Task Type: Knot Tying Task Type: First Aid Task Complexity: Low (1) Hand Cuff (10

UWB transmitter

DOEpatents

Dallum, Gregory E.; Pratt, Garth C.; Haugen, Peter C.; Romero, Carlos E.

2013-01-15

An ultra-wideband (UWB) dual impulse transmitter is made up of a trigger edge selection circuit actuated by a single trigger input pulse; a first step recovery diode (SRD) based pulser connected to the trigger edge selection circuit to generate a first impulse output; and a second step recovery diode (SRD) based pulser connected to the trigger edge selection circuit in parallel to the first pulser to generate a second impulse output having a selected delay from the first impulse output.

The parallel programming of voluntary and reflexive saccades.

PubMed

Walker, Robin; McSorley, Eugene

2006-06-01

A novel two-step paradigm was used to investigate the parallel programming of consecutive, stimulus-elicited ('reflexive') and endogenous ('voluntary') saccades. The mean latency of voluntary saccades, made following the first reflexive saccades in two-step conditions, was significantly reduced compared to that of voluntary saccades made in the single-step control trials. The latency of the first reflexive saccades was modulated by the requirement to make a second saccade: first saccade latency increased when a second voluntary saccade was required in the opposite direction to the first saccade, and decreased when a second saccade was required in the same direction as the first reflexive saccade. A second experiment confirmed the basic effect and also showed that a second reflexive saccade may be programmed in parallel with a first voluntary saccade. The results support the view that voluntary and reflexive saccades can be programmed in parallel on a common motor map.

Gummel Symmetry Test on charge based drain current expression using modified first-order hyperbolic velocity-field expression

NASA Astrophysics Data System (ADS)

Singh, Kirmender; Bhattacharyya, A. B.

2017-03-01

Gummel Symmetry Test (GST) has been a benchmark industry standard for MOSFET models and is considered as one of important tests by the modeling community. BSIM4 MOSFET model fails to pass GST as the drain current equation is not symmetrical because drain and source potentials are not referenced to bulk. BSIM6 MOSFET model overcomes this limitation by taking all terminal biases with reference to bulk and using proper velocity saturation (v -E) model. The drain current equation in BSIM6 is charge based and continuous in all regions of operation. It, however, adopts a complicated method to compute source and drain charges. In this work we propose to use conventional charge based method formulated by Enz for obtaining simpler analytical drain current expression that passes GST. For this purpose we adopt two steps: (i) In the first step we use a modified first-order hyperbolic v -E model with adjustable coefficients which is integrable, simple and accurate, and (ii) In the second we use a multiplying factor in the modified first-order hyperbolic v -E expression to obtain correct monotonic asymptotic behavior around the origin of lateral electric field. This factor is of empirical form, which is a function of drain voltage (vd) and source voltage (vs) . After considering both the above steps we obtain drain current expression whose accuracy is similar to that obtained from second-order hyperbolic v -E model. In modified first-order hyperbolic v -E expression if vd and vs is replaced by smoothing functions for the effective drain voltage (vdeff) and effective source voltage (vseff), it will as well take care of discontinuity between linear to saturation regions of operation. The condition of symmetry is shown to be satisfied by drain current and its higher order derivatives, as both of them are odd functions and their even order derivatives smoothly pass through the origin. In strong inversion region and technology node of 22 nm the GST is shown to pass till sixth-order derivative and for weak inversion it is shown till fifth-order derivative. In the expression of drain current major short channel phenomena like vertical field mobility reduction, velocity saturation and velocity overshoot have been taken into consideration.

Common Challenges Faced by Women of Color in Physics, and Actions Faculty Can Take to Minimize Those Challenges

NASA Astrophysics Data System (ADS)

Johnson, Angela; Ong, Maria; Ko, Lily T.; Smith, Janet; Hodari, Apriel

2017-09-01

Women of color are deeply underrepresented in physics. Between 2002 and 2012, only 1% of graduating physics majors were Black women and another 1% were Latinas; only 61 American Indian women total completed degrees in physics in those years (out of 48,000 physics majors). This isolation can lead to additional obstacles that women of color majoring in physics must face above and beyond the challenging material. In this article we draw on qualitative findings to describe common obstacles women of color face. However, departments can take deliberate steps so that underrepresentation need not turn into loneliness and isolation. We describe the characteristics of a department where women of color report that they are thriving. We end with concrete steps physics faculty can take to support women physics majors of color.

Effect of a Quality Improvement Intervention on Clinical Outcomes in Patients in India With Acute Myocardial Infarction: The ACS QUIK Randomized Clinical Trial.

PubMed

Huffman, Mark D; Mohanan, Padinhare P; Devarajan, Raji; Baldridge, Abigail S; Kondal, Dimple; Zhao, Lihui; Ali, Mumtaj; Krishnan, Mangalath N; Natesan, Syam; Gopinath, Rajesh; Viswanathan, Sunitha; Stigi, Joseph; Joseph, Johny; Chozhakkat, Somanathan; Lloyd-Jones, Donald M; Prabhakaran, Dorairaj

2018-02-13

Wide heterogeneity exists in acute myocardial infarction treatment and outcomes in India. To evaluate the effect of a locally adapted quality improvement tool kit on clinical outcomes and process measures in Kerala, a southern Indian state. Cluster randomized, stepped-wedge clinical trial conducted between November 10, 2014, and November 9, 2016, in 63 hospitals in Kerala, India, with a last date of follow-up of December 31, 2016. During 5 predefined steps over the study period, hospitals were randomly selected to move in a 1-way crossover from the control group to the intervention group. Consecutively presenting patients with acute myocardial infarction were offered participation. Hospitals provided either usual care (control group; n = 10 066 participants [step 0: n = 2915; step 1: n = 2649; step 2: n = 2251; step 3: n = 1422; step 4; n = 829; step 5: n = 0]) or care using a quality improvement tool kit (intervention group; n = 11 308 participants [step 0: n = 0; step 1: n = 662; step 2: n = 1265; step 3: n = 2432; step 4: n = 3214; step 5: n = 3735]) that consisted of audit and feedback, checklists, patient education materials, and linkage to emergency cardiovascular care and quality improvement training. The primary outcome was the composite of all-cause death, reinfarction, stroke, or major bleeding using standardized definitions at 30 days. Secondary outcomes included the primary outcome's individual components, 30-day cardiovascular death, medication use, and tobacco cessation counseling. Mixed-effects logistic regression models were used to account for clustering and temporal trends. Among 21 374 eligible randomized participants (mean age, 60.6 [SD, 12.0] years; n = 16 183 men [76%] ; n = 13 689 [64%] with ST-segment elevation myocardial infarction), 21 079 (99%) completed the trial. The primary composite outcome was observed in 5.3% of the intervention participants and 6.4% of the control participants. The observed difference in 30-day major adverse cardiovascular event rates between the groups was not statistically significant after adjustment (adjusted risk difference, -0.09% [95% CI, -1.32% to 1.14%]; adjusted odds ratio, 0.98 [95% CI, 0.80-1.21]). The intervention group had a higher rate of medication use including reperfusion but no effect on tobacco cessation counseling. There were no unexpected adverse events reported. Among patients with acute myocardial infarction in Kerala, India, use of a quality improvement intervention compared with usual care did not decrease a composite of 30-day major adverse cardiovascular events. Further research is needed to understand the lack of efficacy. clinicaltrials.gov Identifier: NCT02256657.

A new test environment for the SOFIA secondary mirror assembly to reduce the required time for in-flight testing

NASA Astrophysics Data System (ADS)

Lammen, Yannick; Reinacher, Andreas; Brewster, Rick; Greiner, Benjamin; Graf, Friederike; Krabbe, Alfred

2016-07-01

The Stratospheric Observatory For Infrared Astronomy (SOFIA) reached its full operational capability in 2014 and takes off from the NASA Armstrong Flight Research Center to explore the universe about three times a week. Maximizing the program's scientific output naturally leaves very little flight time for implementation and test of improved soft- and hardware. Consequently, it is very important to have a comparable test environment and infrastructure to perform troubleshooting, verifications and improvements on ground without interfering with science missions. SOFIA's Secondary Mirror Mechanism is one of the most complex systems of the observatory. In 2012 a first simple laboratory mockup of the mechanism was built to perform basic controller tests in the lower frequency band of up to 50Hz. This was a first step to relocate required engineering tests from the active observatory into the laboratory. However, to test and include accurate filters and damping methods as well as to evaluate hardware modifications a more precise mockup is required that represents the system characteristics over a much larger frequency range. Therefore the mockup has been improved in several steps to a full test environment representing the system dynamics with high accuracy. This new ground equipment allows moving almost the entire secondary mirror test activities away from the observatory. As fast actuator in the optical path, the SMM also plays a major role in SOFIA's pointing stabilization concept. To increase the steering bandwidth, hardware changes are required that ultimately need to be evaluated using the telescope optics. One interesting concept presented in this contribution is the in- stallation of piezo stack actuators between the mirror and the chopping mechanism. First successful baseline tests are presented. An outlook is given about upcoming performance tests of the actively controlled piezo stage with local metrology and optical feedback. To minimize the impact on science time, the laboratory test setup will be expanded with an optical measurement system so that it can be used for the vast majority of testing.

Additional Improvements to the NASA Lewis Ice Accretion Code LEWICE

NASA Technical Reports Server (NTRS)

Wright, William B.; Bidwell, Colin S.

1995-01-01

Due to the feedback of the user community, three major features have been added to the NASA Lewis ice accretion code LEWICE. These features include: first, further improvements to the numerics of the code so that more time steps can be run and so that the code is more stable; second, inclusion and refinement of the roughness prediction model described in an earlier paper; third, inclusion of multi-element trajectory and ice accretion capabilities to LEWICE. This paper will describe each of these advancements in full and make comparisons with the experimental data available. Further refinement of these features and inclusion of additional features will be performed as more feedback is received.

Restricting lignin and enhancing sugar deposition in secondary cell walls enhances monomeric sugar release after low temperature ionic liquid pretreatment

DOE PAGES

Scullin, Chessa; Cruz, Alejandro G.; Chuang, Yi -De; ...

2015-07-04

Lignocellulosic biomass has the potential to be a major source of renewable sugar for biofuel production. Before enzymatic hydrolysis, biomass must first undergo a pretreatment step in order to be more susceptible to saccharification and generate high yields of fermentable sugars. Lignin, a complex, interlinked, phenolic polymer, associates with secondary cell wall polysaccharides, rendering them less accessible to enzymatic hydrolysis. Herein, we describe the analysis of engineered Arabidopsis lines where lignin biosynthesis was repressed in fiber tissues but retained in the vessels, and polysaccharide deposition was enhanced in fiber cells with little to no apparent negative impact on growth phenotype.

A concise classification of bencao (materia medica).

PubMed

Zhao, Zhongzhen; Guo, Ping; Brand, Eric

2018-01-01

Books that record the sources and applications of medicinal materials are commonly known as bencao ( materia medica ) in China. Bencao ( materia medica ) literature review is the very first step in the standard authentication procedure of Chinese medicinals. As an important part of China's cultural heritage, these various bencao ( materia medica ) texts represent centuries of accumulated wisdom in combating disease and preserving health. In this short review, bencao ( materia medica ) classics of China are broadly divided into three major categories in our routine practice: mainstream bencao ( materia medica ), thematic bencao ( materia medica ) and regional bencao ( materia medica ). The overall significance and current situation of exploration of bencao ( materia medica ) literature are summarized as well.

The pentose phosphate pathway and cancer

PubMed Central

Patra, Krushna C.; Hay, Nissim

2015-01-01

The pentose phosphate pathway (PPP), which branches from glycolysis at the first committed step of glucose metabolism, is required for the synthesis of ribonucleotides and is a major source of NADPH. NADPH is required for and consumed during fatty acid synthesis and the scavenging of reactive oxygen species. Therefore, the PPP plays a pivotal role in helping glycolytic cancer cells to meet their anabolic demands and combat oxidative stress. Recently, several neoplastic lesions were shown to have evolved to facilitate the flux of glucose into the pentose phosphate pathway. This review summarizes the fundamental functions of the PPP, its regulation in cancer cells, and its importance in cancer cell metabolism and survival. PMID:25037503

Effect of compressibility at high subsonic velocities on the lifting force acting on an elliptic cylinder

NASA Technical Reports Server (NTRS)

Kaplan, Carl

1946-01-01

An extended form of the Ackeret iteration method, applicable to arbitrary profiles, is utilized to calculate the compressible flow at high subsonic velocities past an elliptic cylinder. The angle of attack to the direction of the undisturbed stream is small and the circulation is fixed by the Kutta condition at the trailing end of the major axis. The expression for the lifting force on the elliptic cylinder is derived and shows a first-step improvement of the Prandtl-Glauert rule. It is further shown that the expression for the lifting force, although derived specifically for an elliptic cylinder, may be extended to arbitrary symmetrical profiles.

Effects of spin-orbit coupling and many-body correlations in STM transport through copper phthalocyanine.

PubMed

Siegert, Benjamin; Donarini, Andrea; Grifoni, Milena

2015-01-01

The interplay of exchange correlations and spin-orbit interaction (SOI) on the many-body spectrum of a copper phtalocyanine (CuPc) molecule and their signatures in transport are investigated. We first derive a minimal model Hamiltonian in a basis of frontier orbitals that is able to reproduce experimentally observed singlet-triplet splittings. In a second step SOI effects are included perturbatively. Major consequences of the SOI are the splitting of former degenerate levels and a magnetic anisotropy, which can be captured by an effective low-energy spin Hamiltonian. We show that scanning tunneling microscopy-based magnetoconductance measurements can yield clear signatures of both these SOI-induced effects.

A Case Study on Sepsis Using PubMed and Deep Learning for Ontology Learning.

PubMed

Arguello Casteleiro, Mercedes; Maseda Fernandez, Diego; Demetriou, George; Read, Warren; Fernandez Prieto, Maria Jesus; Des Diz, Julio; Nenadic, Goran; Keane, John; Stevens, Robert

2017-01-01

We investigate the application of distributional semantics models for facilitating unsupervised extraction of biomedical terms from unannotated corpora. Term extraction is used as the first step of an ontology learning process that aims to (semi-)automatic annotation of biomedical concepts and relations from more than 300K PubMed titles and abstracts. We experimented with both traditional distributional semantics methods such as Latent Semantic Analysis (LSA) and Latent Dirichlet Allocation (LDA) as well as the neural language models CBOW and Skip-gram from Deep Learning. The evaluation conducted concentrates on sepsis, a major life-threatening condition, and shows that Deep Learning models outperform LSA and LDA with much higher precision.

Restricting lignin and enhancing sugar deposition in secondary cell walls enhances monomeric sugar release after low temperature ionic liquid pretreatment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scullin, Chessa; Cruz, Alejandro G.; Chuang, Yi -De

Lignocellulosic biomass has the potential to be a major source of renewable sugar for biofuel production. Before enzymatic hydrolysis, biomass must first undergo a pretreatment step in order to be more susceptible to saccharification and generate high yields of fermentable sugars. Lignin, a complex, interlinked, phenolic polymer, associates with secondary cell wall polysaccharides, rendering them less accessible to enzymatic hydrolysis. Herein, we describe the analysis of engineered Arabidopsis lines where lignin biosynthesis was repressed in fiber tissues but retained in the vessels, and polysaccharide deposition was enhanced in fiber cells with little to no apparent negative impact on growth phenotype.

Crystallization of Macromolecules

PubMed Central

Friedmann, David; Messick, Troy; Marmorstein, Ronen

2014-01-01

X-ray crystallography has evolved into a very powerful tool to determine the three-dimensional structure of macromolecules and macromolecular complexes. The major bottleneck in structure determination by X-ray crystallography is the preparation of suitable crystalline samples. This unit outlines steps for the crystallization of a macromolecule, starting with a purified, homogeneous sample. The first protocols describe preparation of the macromolecular sample (i.e., proteins, nucleic acids, and macromolecular complexes). The preparation and assessment of crystallization trials is then described, along with a protocol for confirming whether the crystals obtained are composed of macromolecule as opposed to a crystallization reagent . Next, the optimization of crystallization conditions is presented. Finally, protocols that facilitate the growth of larger crystals through seeding are described. PMID:22045560

Iris Positioning Using a Grid Attached to a Spring Bow for a Custom Ocular Prosthesis.

PubMed

Chamaria, Ankita; Aras, Meena Ajay; Chitre, Vidya; Costa, Godwin Clovis Da

2017-03-01

Eyes are among the first features of the face to be noticed. Loss of an eye due to congenital, traumatic or pathologic aetiologies causes disfigurement and loss of sensory feedback. It leaves a psychological impact on the patient, thus prosthesis should be provided at the earliest to raise the spirits of the afflicted. Iris positioning is one of the important steps in fabricating customized ocular prosthesis. In facial asymmetry cases, comparison of both irises together can be a major disadvantage. This case report illustrates the use of a unique customized frame spring bow assembly to position the iris disk using the established parallelism between inter pupillary line to the horizontal plane.

Continuous-variable quantum key distribution with 1 Mbps secure key rate.

PubMed

Huang, Duan; Lin, Dakai; Wang, Chao; Liu, Weiqi; Fang, Shuanghong; Peng, Jinye; Huang, Peng; Zeng, Guihua

2015-06-29

We report the first continuous-variable quantum key distribution (CVQKD) experiment to enable the creation of 1 Mbps secure key rate over 25 km standard telecom fiber in a coarse wavelength division multiplexers (CWDM) environment. The result is achieved with two major technological advances: the use of a 1 GHz shot-noise-limited homodyne detector and the implementation of a 50 MHz clock system. The excess noise due to noise photons from local oscillator and classical data channels in CWDM is controlled effectively. We note that the experimental verification of high-bit-rate CVQKD in the multiplexing environment is a significant step closer toward large-scale deployment in fiber networks.

Multi-objective optimization of process parameters of multi-step shaft formed with cross wedge rolling based on orthogonal test

NASA Astrophysics Data System (ADS)

Han, S. T.; Shu, X. D.; Shchukin, V.; Kozhevnikova, G.

2018-06-01

In order to achieve reasonable process parameters in forming multi-step shaft by cross wedge rolling, the research studied the rolling-forming process multi-step shaft on the DEFORM-3D finite element software. The interactive orthogonal experiment was used to study the effect of the eight parameters, the first section shrinkage rate φ1, the first forming angle α1, the first spreading angle β1, the first spreading length L1, the second section shrinkage rate φ2, the second forming angle α2, the second spreading angle β2 and the second spreading length L2, on the quality of shaft end and the microstructure uniformity. By using the fuzzy mathematics comprehensive evaluation method and the extreme difference analysis, the influence degree of the process parameters on the quality of the multi-step shaft is obtained: β2>φ2L1>α1>β1>φ1>α2L2. The results of the study can provide guidance for obtaining multi-stepped shaft with high mechanical properties and achieving near net forming without stub bar in cross wedge rolling.

Detailed reaction mechanism of macrophomate synthase. Extraordinary enzyme catalyzing five-step transformation from 2-pyrones to benzoates.

PubMed

Watanabe, K; Mie, T; Ichihara, A; Oikawa, H; Honma, M

2000-12-08

Macrophomate synthase from the fungus Macrophoma commelinae IFO 9570 is a Mg(II)-dependent dimeric enzyme that catalyzes an extraordinary, complex five-step chemical transformation from 2-pyrone and oxalacetate to benzoate involving decarboxylation, C-C bond formation, and dehydration. The catalytic mechanism of the whole pathway was investigated in three separate chemical steps. In the first decarboxylation step, the enzyme loses oxalacetate decarboxylation activity upon incubation with EDTA. Activity is fully restored by addition of Mg(II) and is not restored with other divalent metal cations. The dissociation constant of 0.93 x 10(-)(7) for Mg(II) and atomic absorption analysis established a 1:1 stoichiometric complex. Inhibition of pyruvate formation with 2-pyrone revealed that the actual product in the first step is a pyruvate enolate, which undergoes C-C bond formation in the presence of 2-pyrone. Incubation of substrate analogs provided aberrant adducts that were produced via C-C bond formation and rearrangement. This strongly indicates that the second step is two C-C bond formations, affording a bicyclic intermediate. Based on the stereospecificity, involvement of a Diels-Alder reaction at the second step is proposed. Incubation of the stereospecifically deuterium-labeled malate with 2-pyrones in the presence of malate dehydrogenase provided information for the stereochemical course of the reaction catalyzed by macrophomate synthase, indicating that the first decarboxylation provides pyruvate (Z)-[3-(2)H]enolate and that dehydration at the final step occurs with anti-elimination accompanied by concomitant decarboxylation. Examination of kinetic parameters in the individual steps suggests that the third step is the rate-determining step of the overall transformation.

A preliminary evaluation of an F100 engine parameter estimation process using flight data

NASA Technical Reports Server (NTRS)

Maine, Trindel A.; Gilyard, Glenn B.; Lambert, Heather H.

1990-01-01

The parameter estimation algorithm developed for the F100 engine is described. The algorithm is a two-step process. The first step consists of a Kalman filter estimation of five deterioration parameters, which model the off-nominal behavior of the engine during flight. The second step is based on a simplified steady-state model of the compact engine model (CEM). In this step, the control vector in the CEM is augmented by the deterioration parameters estimated in the first step. The results of an evaluation made using flight data from the F-15 aircraft are presented, indicating that the algorithm can provide reasonable estimates of engine variables for an advanced propulsion control law development.

A preliminary evaluation of an F100 engine parameter estimation process using flight data

NASA Technical Reports Server (NTRS)

Maine, Trindel A.; Gilyard, Glenn B.; Lambert, Heather H.

1990-01-01

The parameter estimation algorithm developed for the F100 engine is described. The algorithm is a two-step process. The first step consists of a Kalman filter estimation of five deterioration parameters, which model the off-nominal behavior of the engine during flight. The second step is based on a simplified steady-state model of the 'compact engine model' (CEM). In this step the control vector in the CEM is augmented by the deterioration parameters estimated in the first step. The results of an evaluation made using flight data from the F-15 aircraft are presented, indicating that the algorithm can provide reasonable estimates of engine variables for an advanced propulsion-control-law development.

[Implementation of a rational standard of hygiene for preparation of operating rooms].

PubMed

Bauer, M; Scheithauer, S; Moerer, O; Pütz, H; Sliwa, B; Schmidt, C E; Russo, S G; Waeschle, R M

2015-10-01

The assurance of high standards of care is a major requirement in German hospitals while cost reduction and efficient use of resources are mandatory. These requirements are particularly evident in the high-risk and cost-intensive operating theatre field with multiple process steps. The cleaning of operating rooms (OR) between surgical procedures is of major relevance for patient safety and requires time and human resources. The hygiene procedure plan for OR cleaning between operations at the university hospital in Göttingen was revised and optimized according to the plan-do-check-act principle due to not clearly defined specifications of responsibilities, use of resources, prolonged process times and increased staff engagement. The current status was evaluated in 2012 as part of the first step "plan". The subsequent step "do" included an expert symposium with external consultants, interdisciplinary consensus conferences with an actualization of the former hygiene procedure plan and the implementation process. All staff members involved were integrated into this management change process. The penetration rate of the training and information measures as well as the acceptance and compliance with the new hygiene procedure plan were reviewed within step "check". The rates of positive swabs and air sampling as well as of postoperative wound infections were analyzed for quality control and no evidence for a reduced effectiveness of the new hygiene plan was found. After the successful implementation of these measures the next improvement cycle ("act") was performed in 2014 which led to a simplification of the hygiene plan by reduction of the number of defined cleaning and disinfection programs for preparation of the OR. The reorganization measures described led to a comprehensive commitment of the hygiene procedure plan by distinct specifications for responsibilities, for the course of action and for the use of resources. Furthermore, a simplification of the plan, a rational staff assignment and reduced process times were accomplished. Finally, potential conflicts due to an insufficient evidence-based knowledge of personnel was reduced. This present project description can be used by other hospitals as a guideline for similar changes in management processes.

Absolute phase estimation: adaptive local denoising and global unwrapping.

PubMed

Bioucas-Dias, Jose; Katkovnik, Vladimir; Astola, Jaakko; Egiazarian, Karen

2008-10-10

The paper attacks absolute phase estimation with a two-step approach: the first step applies an adaptive local denoising scheme to the modulo-2 pi noisy phase; the second step applies a robust phase unwrapping algorithm to the denoised modulo-2 pi phase obtained in the first step. The adaptive local modulo-2 pi phase denoising is a new algorithm based on local polynomial approximations. The zero-order and the first-order approximations of the phase are calculated in sliding windows of varying size. The zero-order approximation is used for pointwise adaptive window size selection, whereas the first-order approximation is used to filter the phase in the obtained windows. For phase unwrapping, we apply the recently introduced robust (in the sense of discontinuity preserving) PUMA unwrapping algorithm [IEEE Trans. Image Process.16, 698 (2007)] to the denoised wrapped phase. Simulations give evidence that the proposed algorithm yields state-of-the-art performance, enabling strong noise attenuation while preserving image details. (c) 2008 Optical Society of America

Mg2+ in the Major Groove Modulates B-DNA Structure and Dynamics

PubMed Central

Guéroult, Marc; Boittin, Olivier; Mauffret, Oliver; Etchebest, Catherine; Hartmann, Brigitte

2012-01-01

This study investigates the effect of Mg2+ bound to the DNA major groove on DNA structure and dynamics. The analysis of a comprehensive dataset of B-DNA crystallographic structures shows that divalent cations are preferentially located in the DNA major groove where they interact with successive bases of (A/G)pG and the phosphate group of 5′-CpA or TpG. Based on this knowledge, molecular dynamics simulations were carried out on a DNA oligomer without or with Mg2+ close to an ApG step. These simulations showed that the hydrated Mg2+ forms a stable intra-strand cross-link between the two purines in solution. ApG generates an electrostatic potential in the major groove that is particularly attractive for cations; its intrinsic conformation is well-adapted to the formation of water-mediated hydrogen bonds with Mg2+. The binding of Mg2+ modulates the behavior of the 5′-neighboring step by increasing the BII (ε-ζ>0°) population of its phosphate group. Additional electrostatic interactions between the 5′-phosphate group and Mg2+ strengthen both the DNA-cation binding and the BII character of the 5′-step. Cation binding in the major groove may therefore locally influence the DNA conformational landscape, suggesting a possible avenue for better understanding how strong DNA distortions can be stabilized in protein-DNA complexes. PMID:22844516

Noble gas composition of Indian carbonatites (Amba Dongar, Siriwasan): Implications on mantle source compositions and late-stage hydrothermal processes

NASA Astrophysics Data System (ADS)

Hopp, Jens; Viladkar, Shrinivas G.

2018-06-01

Within a stepwise crushing study we determined the noble gas composition of several calcite separates, one aegirine and one pyrochlore-aegirine separate of the carbonatite ring dyke complex of Amba Dongar and carbonatite sill complex of Siriwasan, India. Both carbonatites are related to the waning stages of volcanic activity of the Deccan Igneous Province ca. 65 Ma ago. Major observations are a clear radiogenic 4He* and nucleogenic 21Ne* imprint related to in situ production from U and Th in mineral impurities, most likely minute apatite grains, or late incorporation of crustal fluids. However, in first crushing steps of most calcites from Amba Dongar a well-resolvable mantle neon signal is observed, with lowest air-corrected mantle 21Ne/22Ne-compositions equivalent to the Réunion hotspot mantle source. In case of the aegirine separate from Siriwasan we found a neon composition similar to the Loihi hotspot mantle source. This transition from a mantle plume signal in first crushing step to a more nucleogenic signature with progressive crushing indicates the presence of an external (crustal) or in situ nucleogenic component unrelated and superposed to the initial mantle neon component whose composition is best approximated by results of first crushing step(s). This contradicts previous models of a lithospheric mantle source of the carbonatitic magmas from Amba Dongar containing recycled crustal components which base on nucleogenic neon compositions. Instead, the mantle source of both investigated carbonatite complexes is related to a primitive mantle plume source that we tentatively ascribe to the postulated Deccan mantle plume. If, as is commonly suggested, the present location of the Deccan mantle plume source is below Réunion Island, the currently observed more nucleogenic neon isotopic composition of the Réunion hotspot might be obliterated by significant upper mantle contributions. In addition, compared with other carbonatite complexes worldwide a rather significant contribution of atmospheric noble gases is observed. This is documented in cut-off 20Ne/22Ne-ratios of ca. 10.2 (Amba Dongar) and 10.45 (Siriwasan) and cut-off 40Ar/36Ar-ratios of about 1500. This atmospheric component had been added at shallow levels during the emplacement process or later during hydrothermal alteration. However, understanding the late-stage interaction between atmospheric gases and magmatic mantle fluids still requires further investigation.

Mutational Effects and Population Dynamics During Viral Adaptation Challenge Current Models

PubMed Central

Miller, Craig R.; Joyce, Paul; Wichman, Holly A.

2011-01-01

Adaptation in haploid organisms has been extensively modeled but little tested. Using a microvirid bacteriophage (ID11), we conducted serial passage adaptations at two bottleneck sizes (104 and 106), followed by fitness assays and whole-genome sequencing of 631 individual isolates. Extensive genetic variation was observed including 22 beneficial, several nearly neutral, and several deleterious mutations. In the three large bottleneck lines, up to eight different haplotypes were observed in samples of 23 genomes from the final time point. The small bottleneck lines were less diverse. The small bottleneck lines appeared to operate near the transition between isolated selective sweeps and conditions of complex dynamics (e.g., clonal interference). The large bottleneck lines exhibited extensive interference and less stochasticity, with multiple beneficial mutations establishing on a variety of backgrounds. Several leapfrog events occurred. The distribution of first-step adaptive mutations differed significantly from the distribution of second-steps, and a surprisingly large number of second-step beneficial mutations were observed on a highly fit first-step background. Furthermore, few first-step mutations appeared as second-steps and second-steps had substantially smaller selection coefficients. Collectively, the results indicate that the fitness landscape falls between the extremes of smooth and fully uncorrelated, violating the assumptions of many current mutational landscape models. PMID:21041559

Preliminary characterization of carbon dioxide transfer in a hollow fiber membrane module as a possible solution for gas-liquid transfer in microgravity conditions

NASA Astrophysics Data System (ADS)

Farges, Bérangère; Duchez, David; Dussap, Claude-Gilles; Cornet, Jean-François

2012-01-01

In microgravity, one of the major challenge encountered in biological life support systems (BLSS) is the gas-liquid transfer with, for instance, the necessity to provide CO2 (carbon source, pH control) and to recover the evolved O2 in photobioreactors used as atmosphere bioregenerative systems.This paper describes first the development of a system enabling the accurate characterization of the mass transfer limiting step for a PTFE membrane module used as a possible efficient solution to the microgravity gas-liquid transfer. This original technical apparatus, together with a technical assessment of membrane permeability to different gases, is associated with a balance model, determining thus completely the CO2 mass transfer problem between phases. First results are given and discussed for the CO2 mass transfer coefficient kLCO obtained in case of absorption experiments at pH 8 using the hollow fiber membrane module. The consistency of the proposed method, based on a gas and liquid phase balances verifying carbon conservation enables a very accurate determination of the kLCO value as a main limiting step of the whole process. Nevertheless, further experiments are still needed to demonstrate that the proposed method could serve in the future as reference method for mass transfer coefficient determination if using membrane modules for BLSS in reduced or microgravity conditions.

First-order analytic propagation of satellites in the exponential atmosphere of an oblate planet

NASA Astrophysics Data System (ADS)

Martinusi, Vladimir; Dell'Elce, Lamberto; Kerschen, Gaëtan

2017-04-01

The paper offers the fully analytic solution to the motion of a satellite orbiting under the influence of the two major perturbations, due to the oblateness and the atmospheric drag. The solution is presented in a time-explicit form, and takes into account an exponential distribution of the atmospheric density, an assumption that is reasonably close to reality. The approach involves two essential steps. The first one concerns a new approximate mathematical model that admits a closed-form solution with respect to a set of new variables. The second step is the determination of an infinitesimal contact transformation that allows to navigate between the new and the original variables. This contact transformation is obtained in exact form, and afterwards a Taylor series approximation is proposed in order to make all the computations explicit. The aforementioned transformation accommodates both perturbations, improving the accuracy of the orbit predictions by one order of magnitude with respect to the case when the atmospheric drag is absent from the transformation. Numerical simulations are performed for a low Earth orbit starting at an altitude of 350 km, and they show that the incorporation of drag terms into the contact transformation generates an error reduction by a factor of 7 in the position vector. The proposed method aims at improving the accuracy of analytic orbit propagation and transforming it into a viable alternative to the computationally intensive numerical methods.

Understanding Solar Eruptions with SDO/HMI Measuring Photospheric Flows, Testing Models, and Steps Towards Forecasting Solar Eruptions

NASA Technical Reports Server (NTRS)

Schuck, Peter W.; Linton, Mark; Muglach, Karin; Welsch, Brian; Hageman, Jacob

2010-01-01

The imminent launch of Solar Dynamics Observatory (SDO) will carry the first full-disk imaging vector magnetograph, the Helioseismic and Magnetic Imager (HMI), into an inclined geosynchronous orbit. This magnetograph will provide nearly continuous measurements of photospheric vector magnetic fields at cadences of 90 seconds to 12 minutes with I" resolution, precise pointing, and unfettered by atmospheric seeing. The enormous data stream of 1.5 Terabytes per day from SDO will provide an unprecedented opportunity to understand the mysteries of solar eruptions. These ground-breaking observations will permit the application of a new technique, the differential affine velocity estimator for vector magnetograms (DAVE4VM), to measure photospheric plasma flows in active regions. These measurements will permit, for the first time, accurate assessments of the coronal free energy available for driving CMEs and flares. The details of photospheric plasma flows, particularly along magnetic neutral-lines, are critical to testing models for initiating coronal mass ejections (CMEs) and flares. Assimilating flows and fields into state-of-the art 3D MHD simulations that model the highly stratified solar atmosphere from the convection zone to the corona represents the next step towards achieving NASA's Living with a Star forecasting goals of predicting "when a solar eruption leading to a CME will occur." This talk will describe these major science and predictive advances that will be delivered by SDO /HMI.

Understanding Solar Eruptions with SDO/HMI Measuring Photospheric Flows, Testing Models, and Steps Towards Forecasting Solar Eruptions

NASA Technical Reports Server (NTRS)

Schuck, Peter W.; Linton, M.; Muglach, K.; Hoeksema, T.

2010-01-01

The Solar Dynamics Observatory (SDO) is carrying the first full-disk imaging vector magnetograph, the Helioseismic and Magnetic Imager (HMI), into an inclined geosynchronous orbit. This magnetograph will provide nearly continuous measurements of photospheric vector magnetic fields at cadences of 90 seconds to 12 minutes with 1" resolution, precise pointing, and unfettered by atmospheric seeing. The enormous data stream of 1.5 Terabytes per day from SAO will provide an unprecedented opportunity to understand the mysteries of solar eruptions. These ground-breaking observations will permit the application of a new technique, the differential affine velocity estimator for vector magnetograms (DAVE4VM), to measure photospheric plasma flows in active regions. These measurements will permit, for the first time, accurate assessments of the coronal free energy available for driving CMEs and flares. The details of photospheric plasma flows, particularly along magnetic neutral-lines, are critical to testing models for initiating coronal mass ejections (CMEs) and flares. Assimilating flows and fields into state-of-the art 3D MHD simulations that model the highly stratified solar atmosphere from the convection zone to the corona represents the next step towards achieving NASA's Living with a Star forecasting goals of predicting "when a solar eruption leading to a CME will occur." Our presentation will describe these major science and predictive advances that will be delivered by SDO/HMI.

Biotransformation of Two Pharmaceuticals by the Ammonia-Oxidizing Archaeon Nitrososphaera gargensis.

PubMed

Men, Yujie; Han, Ping; Helbling, Damian E; Jehmlich, Nico; Herbold, Craig; Gulde, Rebekka; Onnis-Hayden, Annalisa; Gu, April Z; Johnson, David R; Wagner, Michael; Fenner, Kathrin

2016-05-03

The biotransformation of some micropollutants has previously been observed to be positively associated with ammonia oxidation activities and the transcript abundance of the archaeal ammonia monooxygenase gene (amoA) in nitrifying activated sludge. Given the increasing interest in and potential importance of ammonia-oxidizing archaea (AOA), we investigated the capabilities of an AOA pure culture, Nitrososphaera gargensis, to biotransform ten micropollutants belonging to three structurally similar groups (i.e., phenylureas, tertiary amides, and tertiary amines). N. gargensis was able to biotransform two of the tertiary amines, mianserin (MIA) and ranitidine (RAN), exhibiting similar compound specificity as two ammonia-oxidizing bacteria (AOB) strains that were tested for comparison. The same MIA and RAN biotransformation reactions were carried out by both the AOA and AOB strains. The major transformation product (TP) of MIA, α-oxo MIA was likely formed via a two-step oxidation reaction. The first hydroxylation step is typically catalyzed by monooxygenases. Three RAN TP candidates were identified from nontarget analysis. Their tentative structures and possible biotransformation pathways were proposed. The biotransformation of MIA and RAN only occurred when ammonia oxidation was active, suggesting cometabolic transformations. Consistently, a comparative proteomic analysis revealed no significant differential expression of any protein-encoding gene in N. gargensis grown on ammonium with MIA or RAN compared with standard cultivation on ammonium only. Taken together, this study provides first important insights regarding the roles played by AOA in micropollutant biotransformation.

Innovative technologies for decentralised water-, wastewater and biowaste management in urban and peri-urban areas.

PubMed

Otterpohl, R; Braun, U; Oldenburg, M

2003-01-01

Avoiding the comingling of water flows coming from different sources and thus obtaining flows with a very low dilution factor is the first and major step key to technical solutions for adequate treatment of household wastewaters. Through their decentral structure and effective recovery of water, energy and fertiliser these systems can be highly cost efficient. Fresh water consumption can be reduced by up to 80% while nutrients can be recovered to a large extent. Source control is also advantageous for hygienic reasons: low volumes are far easier to sanitise. Source separation technology in municipal waste water treatment does often lead decentralised or semicentral systems. The first essential step is the separate collection and treatment of toilet waste in households, which contains almost all pathogens and nutrients. New toilet systems with very low dilution factors, ranging from vacuum- through urine sorting to dry toilets, have been introduced in several projects and proven feasible. New ideas such as the black- and greywater cycle systems are presently under research at the Technical University Hamburg Harburg. Such modular, integrated and small scale systems are only possible through recent advances in membrane technology and, due to their small scale, do have the potential to be installed in densely populated regions. These technologies are options for following the principles of ecological sanitation, to contain, to sanitise and to reuse also in urban areas (EcoSanRes, 2003).

The High School Environment and the Gender Gap in Science and Engineering

PubMed Central

Legewie, Joscha; DiPrete, Thomas A.

2016-01-01

Despite the striking reversal of the gender gap in education, women pursue science, technology, engineering, and mathematics (STEM) degrees at much lower rates than those of their male peers. This study extends existing explanations for these gender differences and examines the role of the high school context for plans to major in STEM fields. Building on recent gender theories, we argue that widely shared and hegemonic gender beliefs manifest differently across schools so that the gender-specific formation of study plans is shaped by the local environment of high schools. Using the National Education Longitudinal Study, we first show large variations between high schools in the ability to attract students to STEM fields conditional on a large set of pre–high school measures. Schools that are successful in attracting students to these fields reduce the gender gap by 25 percent or more. As a first step toward understanding what matters about schools, we then estimate the effect of two concrete high school characteristics on plans to major in STEM fields in college—a high school's curriculum in STEM and gender segregation of extracurricular activities. These factors have a substantial effect on the gender gap in plans to major in STEM: a finding that is reaffirmed in a number of sensitivity analyses. Our focus on the high school context opens concrete avenues for policy intervention and is of central theoretical importance to understand the gender gap in orientations toward STEM fields. PMID:27857451

The High School Environment and the Gender Gap in Science and Engineering.

PubMed

Legewie, Joscha; DiPrete, Thomas A

2014-10-01

Despite the striking reversal of the gender gap in education, women pursue science, technology, engineering, and mathematics (STEM) degrees at much lower rates than those of their male peers. This study extends existing explanations for these gender differences and examines the role of the high school context for plans to major in STEM fields. Building on recent gender theories, we argue that widely shared and hegemonic gender beliefs manifest differently across schools so that the gender-specific formation of study plans is shaped by the local environment of high schools. Using the National Education Longitudinal Study, we first show large variations between high schools in the ability to attract students to STEM fields conditional on a large set of pre-high school measures. Schools that are successful in attracting students to these fields reduce the gender gap by 25 percent or more. As a first step toward understanding what matters about schools, we then estimate the effect of two concrete high school characteristics on plans to major in STEM fields in college-a high school's curriculum in STEM and gender segregation of extracurricular activities. These factors have a substantial effect on the gender gap in plans to major in STEM: a finding that is reaffirmed in a number of sensitivity analyses. Our focus on the high school context opens concrete avenues for policy intervention and is of central theoretical importance to understand the gender gap in orientations toward STEM fields.

Does pedometer goal setting improve physical activity among Native elders? Results from a randomized pilot study.

PubMed

Sawchuk, Craig N; Russo, Joan E; Charles, Steve; Goldberg, Jack; Forquera, Ralph; Roy-Byrne, Peter; Buchwald, Dedra

2011-01-01

We examined if step-count goal setting resulted in increases in physical activity and walking compared to only monitoring step counts with pedometers among American Indian/Alaska Native elders. Outcomes included step counts, self-reported physical activity and well-being, and performance on the 6-minute walk test. Although no significant between-group differences were found, within-group analyses indicated that elders significantly improved on the majority of step count, physical activity, health-related quality of life, and 6-minute walk outcomes.

A Systems Approach towards an Intelligent and Self-Controlling Platform for Integrated Continuous Reaction Sequences**

PubMed Central

Ingham, Richard J; Battilocchio, Claudio; Fitzpatrick, Daniel E; Sliwinski, Eric; Hawkins, Joel M; Ley, Steven V

2015-01-01

Performing reactions in flow can offer major advantages over batch methods. However, laboratory flow chemistry processes are currently often limited to single steps or short sequences due to the complexity involved with operating a multi-step process. Using new modular components for downstream processing, coupled with control technologies, more advanced multi-step flow sequences can be realized. These tools are applied to the synthesis of 2-aminoadamantane-2-carboxylic acid. A system comprising three chemistry steps and three workup steps was developed, having sufficient autonomy and self-regulation to be managed by a single operator. PMID:25377747

First Step to Success--A School/Home Intervention Program for Preventing Problem Behaviors in Young Children: Examining the Effectiveness and Social Validity in Turkey

ERIC Educational Resources Information Center

Diken, Ibrahim H.; Cavkaytar, Atilla; Batu, E. Sema; Bozkurt, Funda; Kurtyilmaz, Yildiz

2010-01-01

This study examined the effectiveness of the First Step to Success (FSS) early intervention program for preventing antisocial behavior in Turkey. Participants included 24 students, their teachers and parents from four K-8 elementary schools. The experimental group included 12 targeted students (four kindergarten, four first-grade and four…

The First-Year Teacher: Teaching with Confidence (K-8). New Revised Edition.

ERIC Educational Resources Information Center

Bosch, Karen A.; Kersey, Katharine C.

This book offers beginning teachers daily step-by-step plans for the first 4 weeks of school. It is based on a survey of first year teachers that examined their problems, concerns, needs, and feelings. It is also based on a task force of preservice and inservice teachers who set an agenda and tasks to find out more about beginning teacher needs.…

Race Attribution Modifies the Association Between Daily Discrimination and Major Depressive Disorder Among Blacks: the Role of Gender and Ethnicity.

PubMed

Assari, Shervin; Watkins, Daphne C; Caldwell, Cleopatra H

2015-06-01

Although the association between discrimination and depression among Blacks is well-known, we do not know if this effect is influenced by race attribution. In this current study, we investigated the effect modification of race attribution on the association between everyday discrimination and major depressive disorder (MDD) among Blacks in the United States, and whether this effect modification is influenced by the intersection of ethnicity and gender. With a cross-sectional design, this study used data from the National Survey of American Life (NSAL), 2001-2003. The study included a nationally representative sample of Blacks (n = 5,008), composed of 3,570 African Americans and 1,438 Caribbean Blacks. Everyday discrimination, two single-item measures of race attribution (race as the major barrier against upward social mobility, and race as the main cause for being discriminated against) and 12-month MDD were measured. In the first step, we fit logistic regressions to the pooled sample. In the next step, we ran regressions specific to the intersections of ethnicity and gender. Interaction between race attribution and discrimination were also entered into the models. Among Caribbean Black men, the belief that race is a major barrier against one's own upward social mobility modified the association between exposure to daily discrimination and MDD. In this group, the association between discrimination and MDD was weaker among those who believed that race is a major barrier against one's own upward social mobility. Race attribution did not modify the association between discrimination and MDD among African American men, African American women, and Caribbean Black women. The other measure of race attribution (race as the main cause of being discriminated against) did not modify the association between discrimination and MDD in any ethnicity by gender subgroups. Among Caribbean Black men, the link between everyday discrimination and depression may depend on seeing race as the main barrier against upward social mobility. Among African American men and women, however, the link between discrimination and MDD does not depend on race attribution. Our results suggest that ethnicity, gender, and race attribution may alter the association between discrimination and risk of MDD among Blacks.

Temperature- and field-dependent characterization of a conductor on round core cable

NASA Astrophysics Data System (ADS)

Barth, C.; van der Laan, D. C.; Bagrets, N.; Bayer, C. M.; Weiss, K.-P.; Lange, C.

2015-06-01

The conductor on round core (CORC) cable is one of the major high temperature superconductor cable concepts combining scalability, flexibility, mechanical strength, ease of fabrication and high current density; making it a possible candidate as conductor for large, high field magnets. To simulate the boundary conditions of such magnets as well as the temperature dependence of CORC cables a 1.16 m long sample consisting of 15, 4 mm wide SuperPower REBCO tapes was characterized using the ‘FBI’ (force—field—current) superconductor test facility of the Institute for Technical Physics of the Karlsruhe Institute of Technology. In a five step investigation, the CORC cable’s performance was determined at different transverse mechanical loads, magnetic background fields and temperatures as well as its response to swift current changes. In the first step, the sample’s 77 K, self-field current was measured in a liquid nitrogen bath. In the second step, the temperature dependence was measured at self-field condition and compared with extrapolated single tape data. In the third step, the magnetic background field was repeatedly cycled while measuring the current carrying capabilities to determine the impact of transverse Lorentz forces on the CORC cable sample’s performance. In the fourth step, the sample’s current carrying capabilities were measured at different background fields (2-12 T) and surface temperatures (4.2-51.5 K). Through finite element method simulations, the surface temperatures are converted into average sample temperatures and the gained field- and temperature dependence is compared with extrapolated single tape data. In the fifth step, the response of the CORC cable sample to rapid current changes (8.3 kA s-1) was observed with a fast data acquisition system. During these tests, the sample performance remains constant, no degradation is observed. The sample’s measured current carrying capabilities correlate to those of single tapes assuming field- and temperature dependence as published by the manufacturer.

Stepwise identification of HLA-A*0201-restricted CD8+ T-cell epitope peptides from herpes simplex virus type 1 genome boosted by a StepRank scheme.

PubMed

Bi, Jianjun; Song, Rengang; Yang, Huilan; Li, Bingling; Fan, Jianyong; Liu, Zhongrong; Long, Chaoqin

2011-01-01

Identification of immunodominant epitopes is the first step in the rational design of peptide vaccines aimed at T-cell immunity. To date, however, it is yet a great challenge for accurately predicting the potent epitope peptides from a pool of large-scale candidates with an efficient manner. In this study, a method that we named StepRank has been developed for the reliable and rapid prediction of binding capabilities/affinities between proteins and genome-wide peptides. In this procedure, instead of single strategy used in most traditional epitope identification algorithms, four steps with different purposes and thus different computational demands are employed in turn to screen the large-scale peptide candidates that are normally generated from, for example, pathogenic genome. The steps 1 and 2 aim at qualitative exclusion of typical nonbinders by using empirical rule and linear statistical approach, while the steps 3 and 4 focus on quantitative examination and prediction of the interaction energy profile and binding affinity of peptide to target protein via quantitative structure-activity relationship (QSAR) and structure-based free energy analysis. We exemplify this method through its application to binding predictions of the peptide segments derived from the 76 known open-reading frames (ORFs) of herpes simplex virus type 1 (HSV-1) genome with or without affinity to human major histocompatibility complex class I (MHC I) molecule HLA-A*0201, and find that the predictive results are well compatible with the classical anchor residue theory and perfectly match for the extended motif pattern of MHC I-binding peptides. The putative epitopes are further confirmed by comparisons with 11 experimentally measured HLA-A*0201-restrcited peptides from the HSV-1 glycoproteins D and K. We expect that this well-designed scheme can be applied in the computational screening of other viral genomes as well.

Development of a Targeted Smoking Relapse-Prevention Intervention for Cancer Patients.

PubMed

Meltzer, Lauren R; Meade, Cathy D; Diaz, Diana B; Carrington, Monica S; Brandon, Thomas H; Jacobsen, Paul B; McCaffrey, Judith C; Haura, Eric B; Simmons, Vani N

2018-04-01

We describe the series of iterative steps used to develop a smoking relapse-prevention intervention customized to the needs of cancer patients. Informed by relevant literature and a series of preliminary studies, an educational tool (DVD) was developed to target the unique smoking relapse risk factors among cancer patients. Learner verification interviews were conducted with 10 cancer patients who recently quit smoking to elicit feedback and inform the development of the DVD. The DVD was then refined using iterative processes and feedback from the learner verification interviews. Major changes focused on visual appeal, and the inclusion of additional testimonials and graphics to increase comprehension of key points and further emphasize the message that the patient is in control of their ability to maintain their smoking abstinence. Together, these steps resulted in the creation of a DVD titled Surviving Smokefree®, which represents the first smoking relapse-prevention intervention for cancer patients. If found effective, the Surviving Smokefree® DVD is an easily disseminable and low-cost portable intervention which can assist cancer patients in maintaining smoking abstinence.

Terraforming the Moon: a Viable Step in the Colonization of the Solar System?

NASA Astrophysics Data System (ADS)

Renn, H. W.

2002-01-01

One potential option for the colonization of other celestial bodies is Terraforming. The latter involves, as a first step, the creation of a breathable, artificial atmosphere. While terraforming other planets, especially Mars, has been under discussion for several decades, applying the same concept to Earth's closest neighbor, namely the Moon, plays virtually no role in existing plans for space colonization. This paper investigates the technical and economical feasibility of supplying the Moon with an artificial atmosphere. Based on existing concepts for life support systems, essential requirements for an artificial Lunar atmosphere are defined. Various alternatives for the atmospheric composition are investigated and the parameters of a preferred `reference atmosphere' are described in detail. In order to assess the latter's habitability, particularly with respect to wind speeds and temperature cycles, the Moon's wind system and temperature field are analyzed by using a customized climate simulation model. Aspects of technical feasibility are evaluated and major obstacles are identified. Finally, various assessment criteria with particular respect to economical and ethical considerations are discussed and preliminary conclusions are presented.

Accurate registration of temporal CT images for pulmonary nodules detection

NASA Astrophysics Data System (ADS)

Yan, Jichao; Jiang, Luan; Li, Qiang

2017-02-01

Interpretation of temporal CT images could help the radiologists to detect some subtle interval changes in the sequential examinations. The purpose of this study was to develop a fully automated scheme for accurate registration of temporal CT images for pulmonary nodule detection. Our method consisted of three major registration steps. Firstly, affine transformation was applied in the segmented lung region to obtain global coarse registration images. Secondly, B-splines based free-form deformation (FFD) was used to refine the coarse registration images. Thirdly, Demons algorithm was performed to align the feature points extracted from the registered images in the second step and the reference images. Our database consisted of 91 temporal CT cases obtained from Beijing 301 Hospital and Shanghai Changzheng Hospital. The preliminary results showed that approximately 96.7% cases could obtain accurate registration based on subjective observation. The subtraction images of the reference images and the rigid and non-rigid registered images could effectively remove the normal structures (i.e. blood vessels) and retain the abnormalities (i.e. pulmonary nodules). This would be useful for the screening of lung cancer in our future study.

Development of the VS-50 as an Intermediate Step Towards LM-1

NASA Astrophysics Data System (ADS)

Ettl, J.; Kirchhartz, R.; Hrbud, I.; Basken, R.; Raith, G.; Hecht, M.; de Almeide, F. A.; Roda, E. D.

2015-09-01

The VS-50 launch vehicle is the designated intermediate development step of the VLM-1. The VLM-1 launch system is a joint venture between the research center for space DCTAIIAE in Brazil and the German Aerospace Center (DLR) in Germany. Development highlights are application of carbon fiber technologies for the S50 motor case and interstage adaptor, use of fiberglass for the fairing, newly developed thrust vector assembly (TVA) consisting of commercial components, unique navigation system encompassing two IMUs, a GPS receiver, and adaptive control algorithms guiding the vehicle. The VS-50 is a two-stage vehicle using S50 and S44 motors. The development of the VS-50 serves two major purposes: First, VS-SO represents a technological development stage in the VLM-1 development roadmap, and second, it serves as a carrier for scientific payloads. Potential payloads are aerodynamic probes for yielding scientific aero-dynamic and thermo-dynamic data sets at regimes up to 18 Mach. Further, the VS-50 could be used for re-entry research and investigation of re-usable flight objectives.

MreB and MurG as scaffolds for the cytoplasmic steps of peptidoglycan biosynthesis.

PubMed

Favini-Stabile, Sandy; Contreras-Martel, Carlos; Thielens, Nicole; Dessen, Andréa

2013-12-01

Peptidoglycan is a major determinant of cell shape in bacteria, and its biosynthesis involves the concerted action of cytoplasmic, membrane-associated and periplasmic enzymes. Within the cytoplasm, Mur enzymes catalyse the first steps leading to peptidoglycan precursor biosynthesis, and have been suggested as being part of a multicomponent complex that could also involve the transglycosylase MurG and the cytoskeletal protein MreB. In order to initialize the characterization of a potential Mur interaction network, we purified MurD, MurE, MurF, MurG and MreB from Thermotoga maritima and characterized their interactions using membrane blotting and surface plasmon resonance. MurD, MurE and MurF all recognize MurG and MreB, but not each other, while the two latter proteins interact. In addition, we solved the crystal structures of MurD, MurE and MurF, which indicate that their C-termini display high conformational flexibilities. The differences in Mur conformations could be important parameters for the stability of an intracytoplasmic murein biosynthesis complex. © 2013 Society for Applied Microbiology and John Wiley & Sons Ltd.

Hepatitis C virus replicons: dinosaurs still in business?

PubMed Central

Woerz, I; Lohmann, V; Bartenschlager, R

2009-01-01

Since the molecular cloning of the hepatitis C virus (HCV) genome for the first time in 1989, there has been tremendous progress in our understanding of the multiple facets of the replication cycle of this virus. Key to this progress has been the development of systems to propagate the virus in cell culture, which turned out to be a notoriously difficult task. A major breakthrough has been the construction of subgenomic replicons that self-amplify in cultured human hepatoma cells. These RNAs recapitulate the intracellular steps of the HCV replication cycle and have been instrumental to decipher details of the RNA amplification steps including the identification of key host cell factors. However, reproduction of the complete viral replication cycle only became possible with the advent of a particular molecular HCV clone designated JFH-1 that replicates to very high levels and supports the production of infectious virus particles. The availability of this new culture system raises the question, whether the use of replicons is still justified. In this review, we will discuss the pros and cons of both systems.

Precise non-steady-state characterization of solid active materials with no preliminary mechanistic assumptions

DOE PAGES

Constales, Denis; Yablonsky, Gregory S.; Wang, Lucun; ...

2017-04-25

This paper presents a straightforward and user-friendly procedure for extracting a reactivity characterization of catalytic reactions on solid materials under non-steady-state conditions, particularly in temporal analysis of products (TAP) experiments. The kinetic parameters derived by this procedure can help with the development of detailed mechanistic understanding. The procedure consists of the following two major steps: 1) Three “Laplace reactivities” are first determined based on the moments of the exit flow pulse response data; 2) Depending on a select kinetic model, kinetic constants of elementary reaction steps can then be expressed as a function of reactivities and determined accordingly. In particular,more » we distinguish two calculation methods based on the availability and reliability of reactant and product data. The theoretical results are illustrated using a reverse example with given parameters as well as an experimental example of CO oxidation over a supported Au/SiO 2 catalyst. The procedure presented here provides an efficient tool for kinetic characterization of many complex chemical reactions.« less

Low cost hydrogen/novel membrane technology for hydrogen separation from synthesis gas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1986-02-01

To make the coal-to-hydrogen route economically attractive, improvements are being sought in each step of the process: coal gasification, water-carbon monoxide shift reaction, and hydrogen separation. This report addresses the use of membranes in the hydrogen separation step. The separation of hydrogen from synthesis gas is a major cost element in the manufacture of hydrogen from coal. Separation by membranes is an attractive, new, and still largely unexplored approach to the problem. Membrane processes are inherently simple and efficient and often have lower capital and operating costs than conventional processes. In this report current ad future trends in hydrogen productionmore » and use are first summarized. Methods of producing hydrogen from coal are then discussed, with particular emphasis on the Texaco entrained flow gasifier and on current methods of separating hydrogen from this gas stream. The potential for membrane separations in the process is then examined. In particular, the use of membranes for H{sub 2}/CO{sub 2}, H{sub 2}/CO, and H{sub 2}/N{sub 2} separations is discussed. 43 refs., 14 figs., 6 tabs.« less

[Osaka Medical Laboratory ISO15189 Study Group: History and Future Prospects of the Group].

PubMed

Iguchi, Ken

2016-02-01

The IS015189 "Medical laboratories: Specific requirements regarding quality and competence" is an international standard issued by the International Organization for Standardization (ISO) in February 2003. In October 2004, pilot surveys were initiated in Japan prior to accreditation surveys scheduled to be started in 2005. In September 2005, the first ever ISO15189-accredited facility was established in Japan. With the background of limited information about and few opportunities to study ISO15189 in 2004, we established the Osaka Medical Laboratory ISO15189 Study Group as a unique association that anyone interested in the ISO is able to join. Approximately 900 people have participated in group meetings, which have been held a total of 11 times. Thus, our group has played a major role in ISO development in Japan. To date, approximately 100 facilities have been ISO15189-accredited in Japan, suggesting the need to take new steps regarding its accreditation. As our group has achieved our initial objective, we are planning to work towards taking new steps, such as interaction with accredited facilities.

Evaluation of MEDALUS model for desertification hazard zonation using GIS; study area: Iyzad Khast plain, Iran.

PubMed

Farajzadeh, Manuchehr; Egbal, Mahbobeh Nik

2007-08-15

In this study, the MEDALUS model along with GIS mapping techniques are used to determine desertification hazards for a province of Iran to determine the desertification hazard. After creating a desertification database including 20 parameters, the first steps consisted of developing maps of four indices for the MEDALUS model including climate, soil, vegetation and land use were prepared. Since these parameters have mostly been presented for the Mediterranean region in the past, the next step included the addition of other indicators such as ground water and wind erosion. Then all of the layers weighted by environmental conditions present in the area were used (following the same MEDALUS framework) before a desertification map was prepared. The comparison of two maps based on the original and modified MEDALUS models indicates that the addition of more regionally-specific parameters into the model allows for a more accurate representation of desertification processes across the Iyzad Khast plain. The major factors affecting desertification in the area are climate, wind erosion and low land quality management, vegetation degradation and the salinization of soil and water resources.

Step Bunching: Influence of Impurities and Solution Flow

NASA Technical Reports Server (NTRS)

Chernov, A. A.; Vekilov, P. G.; Coriell, S. R.; Murray, B. T.; McFadden, G. B.

1999-01-01

Step bunching results in striations even at relatively early stages of its development and in inclusions of mother liquor at the later stages. Therefore, eliminating step bunching is crucial for high crystal perfection. At least 5 major effects causing and influencing step bunching are known: (1) Basic morphological instability of stepped interfaces. It is caused by concentration gradient in the solution normal to the face and by the redistribution of solute tangentially to the interface which redistribution enhances occasional perturbations in step density due to various types of noise; (2) Aggravation of the above basic instability by solution flowing tangentially to the face in the same directions as the steps or stabilization of equidistant step train if these flows are antiparallel; (3) Enhanced bunching at supersaturation where step velocity v increases with relative supersaturation s much faster than linear. This v(s) dependence is believed to be associated with impurities. The impurities of which adsorption time is comparable with the time needed to deposit one lattice layer may also be responsible for bunching; (4) Very intensive solution flow stabilizes growing interface even at parallel solution and step flows; (5) Macrosteps were observed to nucleate at crystal corners and edges. Numerical simulation, assuming step-step interactions via surface diffusion also show that step bunching may be induced by random step nucleation at the facet edge and by discontinuity in the step density (a ridge) somewhere in the middle of a face. The corresponding bunching patterns produce the ones observed in experiment. The nature of step bunching generated at the corners and edges and by dislocation step sources, as well as the also relative importance and interrelations between mechanisms 1-5 is not clear, both from experimental and theoretical standpoints. Furthermore, several laws controlling the evolution of existing step bunches have been suggested, though unambiguous conclusions are still missing. Addressing these issues is the major goal of the present project. The theory addressing the above problem, experimental methods, several figures which include: (1) the spatial wave numbers at which the system is neutrally stable as a function of growth velocity for linear kinetics and supersaturation for nonlinear kinetics; (2) a schematic of the experiment of lysozyme crystal growing under conditions of natural convection; (3) fluctuations in time, t, of the normal growth rate, R(t), vicinal slope, p(t) and Fourier Spectra of R(t), discussions and conclusions are presented.

Perspectives of unlicensed assistive personnel on career development.

PubMed

Akaragian, Salpy; Crooks, Heidi; Pieters, Huibrie C

2013-09-01

An equivalency program, Method 3, is a viable but underused option for unlicensed assistive personnel (UAP) who pursue licensure. This study describes the perceptions of UAP on opportunities for career development. Eighteen UAP participated in three focus groups. Thematic analysis was conducted with verbatim transcription. Three major themes represented the lively discussions that occurred: core driving forces, processes of career development, and anticipated and desirable outcomes. Various subthemes described these major themes. Method 3 provides a realistic approach to help UAP persevere with career development. Collaboration with management and peers, encouragement, and effective communication contributed to the success of participants, despite obstacles and challenges. Camaraderie and flexible scheduling were critical elements in participants' pursuit of first licensure. Taking small steps was described as an effective approach for UAP to persevere with career development. Support for informal career development is essential. Nursing leaders should consider an equivalency approach to accommodate individual preferences and learning needs for career development. Copyright 2013, SLACK Incorporated.

Peel LTP (Pru p 3)--the major allergen of peach--is methylated. A proteomic study.

PubMed

Larocca, Marilena; Martelli, Giuseppe; Grossi, Gerarda; Padula, Maria Carmela; Riccio, Paolo; Rossano, Rocco

2013-12-01

Lipid transfer protein (LTP, Pru p 3) is the major allergen of peach (Prunus persica), and is in a greater abundance in the peel than in the pulp of the fruit. Peel LTP is more allergenic than pulp LTP, but it is not clear whether this is due to its specific allergenic properties or to its higher concentration. In this study, we have used a new one-step, rapid procedure for the purification of LTP from peel and pulp of four peach varieties [Gladys (white flesh), California (nectarine yellow flesh), Plusplus (yellow flesh), Red Fair (nectarine yellow flesh)] harvested in a field grown in Southern Italy. Purification was based on miniature reversed-phase chromatography, a procedure suitable for proteomic study. Proteomic analysis of purified LTPs revealed that the amino acid sequence of LTP was identical in all peach genotypes but, for the first time, peel LTP was found to be methylated. Copyright © 2013 Elsevier Ltd. All rights reserved.

A Series of Computational Neuroscience Labs Increases Comfort with MATLAB.

PubMed

Nichols, David F

2015-01-01

Computational simulations allow for a low-cost, reliable means to demonstrate complex and often times inaccessible concepts to undergraduates. However, students without prior computer programming training may find working with code-based simulations to be intimidating and distracting. A series of computational neuroscience labs involving the Hodgkin-Huxley equations, an Integrate-and-Fire model, and a Hopfield Memory network were used in an undergraduate neuroscience laboratory component of an introductory level course. Using short focused surveys before and after each lab, student comfort levels were shown to increase drastically from a majority of students being uncomfortable or with neutral feelings about working in the MATLAB environment to a vast majority of students being comfortable working in the environment. Though change was reported within each lab, a series of labs was necessary in order to establish a lasting high level of comfort. Comfort working with code is important as a first step in acquiring computational skills that are required to address many questions within neuroscience.

A Series of Computational Neuroscience Labs Increases Comfort with MATLAB

PubMed Central

Nichols, David F.

2015-01-01

Computational simulations allow for a low-cost, reliable means to demonstrate complex and often times inaccessible concepts to undergraduates. However, students without prior computer programming training may find working with code-based simulations to be intimidating and distracting. A series of computational neuroscience labs involving the Hodgkin-Huxley equations, an Integrate-and-Fire model, and a Hopfield Memory network were used in an undergraduate neuroscience laboratory component of an introductory level course. Using short focused surveys before and after each lab, student comfort levels were shown to increase drastically from a majority of students being uncomfortable or with neutral feelings about working in the MATLAB environment to a vast majority of students being comfortable working in the environment. Though change was reported within each lab, a series of labs was necessary in order to establish a lasting high level of comfort. Comfort working with code is important as a first step in acquiring computational skills that are required to address many questions within neuroscience. PMID:26557798

High-pressure jet cutters improve capping operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abel, L.W.; Campbell, P.J.; Bowden, J.R. Sr.

1995-05-08

Advances in abrasive cutting technology have improved the methods for removing damaged equipment and preparing wellheads for capping. This technology, much of which was refined during well control operations in Kuwait in 1991, can improve the safety and efficiency of capping jobs by cutting wellheads or casing quickly and cleanly. The majority of well control jobs involve one of three types of capping operations: capping to a flange, capping by installing a wellhead, or capping to a casing stub. Capping operations are often the first major step in regaining control of the well during blowout intervention. Proper planning of amore » capping operation must take into account the mass flow rate, combustible nature of the flow, well bore geometry, and operations in the post-capping phase of the project. The paper discusses capping vehicles, tree removal, jet cutters, capping to a flange, capping to a stub, swallowing the stub, spin-on technique, capping on fire, stinging, offshore blowouts, firefighting, pollution control, intervention equipment, and rig removal.« less

Rapid saccharification for production of cellulosic biofuels.

PubMed

Lee, Dae-Seok; Wi, Seung Gon; Lee, Soo Jung; Lee, Yoon-Gyo; Kim, Yeong-Suk; Bae, Hyeun-Jong

2014-04-01

The economical production of biofuels is hindered by the recalcitrance of lignocellulose to processing, causing high consumption of processing enzymes and impeding hydrolysis of pretreated lignocellulosic biomass. We determined the major rate-limiting factor in the hydrolysis of popping pre-treated rice straw (PPRS) by examining cellulase adsorption to lignin and cellulose, amorphogenesis of PPRS, and re-hydrolysis. Based on the results, equivalence between enzyme loading and the open structural area of cellulose was required to significantly increase productive adsorption of cellulase and to accelerate enzymatic saccharification of PPRS. Amorphogenesis of PPRS by phosphoric acid treatment to expand open structural area of the cellulose fibers resulted in twofold higher cellulase adsorption and increased the yield of the first re-hydrolysis step from 13% to 46%. The total yield from PPRS was increased to 84% after 3h. These results provide evidence that cellulose structure is one of major effects on the enzymatic hydrolysis. Copyright © 2014 Elsevier Ltd. All rights reserved.

An infrared search in our solar system as part of a more flexible search strategy

NASA Astrophysics Data System (ADS)

Papagiannis, M. D.

One of several explanations for the Fermi Paradox is that the whole Galaxy, including the solar system, has already been colonized, but that for a variety of reasons the extraterrestrials have chosen not to reveal their presence. IRAS has obtained a large volume of infrared data at 12, 25, 60, and 100 microns from which a special working group at JPL, is trying to establish a special catalog of solar system objects, the vast majority of which are asteroids. A careful search through this data bank for objects with peculiar infrared spectra would be the first step in the search for major artificial objects, such as space stations or materials processing plants, in the solar system. The asteroid belt is an ideal source of raw materials for space colonies, which could have easily escaped detection lost among the many thousands of natural asteroids. Checking them out for excesses in the infrared is an ideal screening test for artificial objects in the solar system.

"Wood already touched by fire is not hard to set alight": Comment on "Constraints to applying systems thinking concepts in health systems: A regional perspective from surveying stakeholders in Eastern Mediterranean countries".

PubMed

Agyepong, Irene Akua

2015-03-01

A major constraint to the application of any form of knowledge and principles is the awareness, understanding and acceptance of the knowledge and principles. Systems Thinking (ST) is a way of understanding and thinking about the nature of health systems and how to make and implement decisions within health systems to maximize desired and minimize undesired effects. A major constraint to applying ST within health systems in Low- and Middle-Income Countries (LMICs) would appear to be an awareness and understanding of ST and how to apply it. This is a fundamental constraint and in the increasing desire to enable the application of ST concepts in health systems in LMIC and understand and evaluate the effects; an essential first step is going to be enabling of a wide spread as well as deeper understanding of ST and how to apply this understanding.

Generation of Leishmania Hybrids by Whole Genomic DNA Transformation

PubMed Central

Coelho, Adriano C.; Leprohon, Philippe; Ouellette, Marc

2012-01-01

Genetic exchange is a powerful tool to study gene function in microorganisms. Here, we tested the feasibility of generating Leishmania hybrids by electroporating genomic DNA of donor cells into recipient Leishmania parasites. The donor DNA was marked with a drug resistance marker facilitating the selection of DNA transfer into the recipient cells. The transferred DNA was integrated exclusively at homologous locus and was as large as 45 kb. The independent generation of L. infantum hybrids with L. major sequences was possible for several chromosomal regions. Interfering with the mismatch repair machinery by inactivating the MSH2 gene enabled an increased efficiency of recombination between divergent sequences, hence favouring the selection of hybrids between species. Hybrids were shown to acquire the phenotype derived from the donor cells, as demonstrated for the transfer of drug resistance genes from L. major into L. infantum. The described method is a first step allowing the generation of in vitro hybrids for testing gene functions in a natural genomic context in the parasite Leishmania. PMID:23029579

Transfusion service disaster planning.

PubMed

Bundy, K L; Foss, M L; Stubbs, J R

2008-01-01

The Mayo Clinic, in Rochester, Minnesota, recently set forth a directive to develop a Mayo Emergency Incident Command System (MEICS) plan to respond to major disasters. The MEICS plan that was developed interfaces with national response plans to ensure effective communication and coordination between our institution and local, state, and federal agencies to establish a common language and communication structure. The MEICS plan addresses multiple aspects of dealing with resource needs during a crisis, including the need for blood and transfusion medicine services. The MEICS plan was developed to supplement our current local emergency preparedness procedures and provide a mechanism for responding to the escalating severity of an emergency to deal with situations of a magnitude that is outside the normal experience. A plan was developed to interface the existing Transfusion Medicine disaster plan standard operating procedures (SOP) with the institutional and Department of Laboratory Medicine (DLMP) MEICS plans. The first step in developing this interface was defining MEICS. Other major steps were defining the chain of command, developing a method for visually indicating who is "in charge," planning communication, defining the actions to be taken, assessing resource needs, developing flowcharts and updating SOPs, and developing a blood rationing team to deal with anticipated blood shortages. Several key features of the interface and updated disaster plan that were developed are calling trees for response personnel, plans for relocating leadership to alternative command centers, and action sheets to assist with resource assessment. The action sheets also provide documentation of key actions by response personnel.

Child Sexual Abuse Prevention: How to Take the First Steps.

ERIC Educational Resources Information Center

Anderson, Cordelia

This booklet provides advice and guidelines for persons interested in developing and implementing child sexual abuse prevention programs. Eight steps to child sexual abuse prevention are outlined. Step 1 involves recognition that child sexual abuse can be prevented, and provides facts to use when discussing sexual abuse. Step 2 highlights ways of…

Impact of Preadmission Variables on USMLE Step 1 and Step 2 Performance

ERIC Educational Resources Information Center

Kleshinski, James; Khuder, Sadik A.; Shapiro, Joseph I.; Gold, Jeffrey P.

2009-01-01

Purpose: To examine the predictive ability of preadmission variables on United States Medical Licensing Examinations (USMLE) step 1 and step 2 performance, incorporating the use of a neural network model. Method: Preadmission data were collected on matriculants from 1998 to 2004. Linear regression analysis was first used to identify predictors of…

Treatment of ectopic eruption of maxillary permanent first molars.

PubMed

Taloumis, L J; Allinder, J R

1993-01-01

A review of treatment of the ectopic maxillary permanent first molar is presented; prevalence and possible etiologies of the condition are explained. A step-by-step procedure for correctly diagnosing and treating the problem is suggested. A case is described in which diagnosis and treatment followed the principles outlined.

Another Curriculum Requirement? Quantitative Reasoning in Economics: Some First Steps

ERIC Educational Resources Information Center

O'Neill, Patrick B.; Flynn, David T.

2013-01-01

In this paper, we describe first steps toward focusing on quantitative reasoning in an intermediate microeconomic theory course. We find student attitudes toward quantitative aspects of economics improve over the duration of the course (as we would hope). Perhaps more importantly, student attitude toward quantitative reasoning improves, in…

Think First: Addressing Aggressive Behavior in Secondary Schools

ERIC Educational Resources Information Center

Larson, Jim

2005-01-01

This highly practical book presents a complete anger and aggression management training program for middle and high school students. The volume incorporates a newly revised version of the author's proven "Think First" manual, which includes step-by-step skills training guidelines and 20 reproducible handouts and forms. Also provided are…

Webinar Presentation: Environmental Exposures and Health Risks in California Child Care Facilities: First Steps to Improve Environmental Health where Children Spend Time

EPA Pesticide Factsheets

This presentation, Environmental Exposures and Health Risks in California Child Care Facilities: First Steps to Improve Environmental Health where Children Spend Time, was given at the NIEHS/EPA Children's Centers 2016 Webinar Series: Exposome.

Direct and Collateral Effects of the First Step to Success Program

ERIC Educational Resources Information Center

Sprague, Jeffrey; Perkins, Kindle

2009-01-01

First Step to Success is a multicomponent behavioral program for at-risk children who show signs of antisocial behavior at the point of school entry. The program incorporates behavioral intervention techniques, including praise and feedback, positive reinforcement, social skills training, teacher and parent collaboration, and time-out/response…

The Competition "First Step to Nobel Prize in Physics"

ERIC Educational Resources Information Center

Gorzkowski, W.; Surya, Y; Zuberek, R

2011-01-01

This paper presents the history of the competition First Step to Nobel Prize in Physics organized by Poland, its development from a national workshop in 1991/92 to an international competition nowadays and its organization, as well as the results obtained by the participants. (Contains 1 table.)

Bottleneck Concepts in Psychology: Exploratory First Steps

ERIC Educational Resources Information Center

Gurung, Regan A. R.; Landrum, R. Eric

2013-01-01

The authors take an initial step in identifying potential bottleneck concepts in psychology, that is, concepts that are deceptively difficult, perhaps due to student overconfidence. In order to first identify bottleneck concepts, faculty (n = 65) rated the difficulty of 91 psychological concepts from across the discipline. Students (n = 35) rated…

Chronic nausea in advanced cancer patients: a retrospective assessment of a metoclopramide-based antiemetic regimen.

PubMed

Bruera, E; Seifert, L; Watanabe, S; Babul, N; Darke, A; Harsanyi, Z; Suarez-Almazor, M

1996-03-01

The purpose of this retrospective study is to assess the frequency and intensity of chronic nausea in patients admitted to the Palliative Care Unit and the results of a metoclopramide-based treatment regimen. We reviewed the medical records of 100 consecutive patients admitted to the Palliative Care Unit at the Edmonton General Hospital until death during 1992-1993. All patients had terminal cancer and normal cognitive function. All patients completed the Functional Analogue Scale for appetite, nausea, pain, activity, shortness of breath, and sensation of well-being at 1000 and 1600 hours every day. Patients who complained of nausea initially received metoclopramide 10 mg every 4 hr orally or subcutaneously (Step 1). If nausea persisted, dexamethasone 10 mg twice daily was added (Step 2). Step 3 consisted of a continuous subcutaneous infusion of metoclopramide of 60-120 mg/day plus dexamethasone. If no response was observed, other antiemetics were administered (Step 4). Upon admission to the unit, 32 patients (32%) presented with nausea. During the average admission of 25 +/- 13 days, 98 patients (98%) developed nausea. Twenty-five patients (25%) required other antiemetics because of bowel obstruction (18), extrapyramidal side effects (3), or other reasons (4). Most patients without bowel obstruction achieved excellent control of nausea using the metoclopramide-based regimen. During the first 5 days and last 5 days of admission, nausea had significantly lower intensity than the rest of the symptoms that were monitored. Our results suggest that, although nausea is very frequent, it can be well controlled in the majority of patients using safe and simple antiemetic regimens.

French intensive truck garden

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edwards, T D

1983-01-01

The French Intensive approach to truck gardening has the potential to provide substantially higher yields and lower per acre costs than do conventional farming techniques. It was the intent of this grant to show that there is the potential to accomplish the gains that the French Intensive method has to offer. It is obvious that locally grown food can greatly reduce transportation energy costs but when there is the consideration of higher efficiencies there will also be energy cost reductions due to lower fertilizer and pesticide useage. As with any farming technique, there is a substantial time interval for completemore » soil recovery after there have been made substantial soil modifications. There were major crop improvements even though there was such a short time since the soil had been greatly disturbed. It was also the intent of this grant to accomplish two other major objectives: first, the garden was managed under organic techniques which meant that there were no chemical fertilizers or synthetic pesticides to be used. Second, the garden was constructed so that a handicapped person in a wheelchair could manage and have a higher degree of self sufficiency with the garden. As an overall result, I would say that the garden has taken the first step of success and each year should become better.« less

The relevance of supply chain characteristics in GHG emissions: The carbon footprint of Maltese juices.

PubMed

Roibás, L; Rodríguez-García, S; Valdramidis, V P; Hospido, A

2018-05-01

Foods and drinks are major contributors (17%) to the greenhouse gas (GHG) emissions caused by private consumption in Europe. The carbon footprint (CF) of a certain product expresses the total GHG emissions over its whole life cycle, and its calculation for foodstuff is a necessary first step to reduce their contribution to global warming. The calculation of the CF of Maltese food products is especially relevant for two reasons: the economic characteristics of the island, whose food sector is highly dependent on imports, implying longer transport distances; and the Maltese electricity production mix, based almost exclusively on oil combustion. The CF of ten multi-fruit juices marketed in Malta has been determined, covering all the processes from the agricultural stage to the distribution of the final products. As a functional unit (FU), a 250 ml bottle of packaged product arriving at the retailer has been considered. The Maltese orange juice, the only final product in which only local ingredients are used, presents the lowest CF (0.50 kgCO 2 /FU), while the remaining ones range from 0.67 kgCO 2 /FU to 0.80 kgCO 2 /FU. The major contributor to all the CFs is juice processing at the Maltese plant (0.42 kgCO 2 /FU), mainly due to the use of electricity (78%). The influence of both the electricity mix and the Maltese supply chain in the CF of the final products has been demonstrated. Alternatives to reduce the impacts of the final products have been proposed and evaluated that could lower the average CF of the juices by 32%. The calculation of the CF of Maltese juices represents an innovative case study due to the characteristics of the island, and it is expected to act as a first step to lower their environmental impacts. Copyright © 2018 Elsevier Ltd. All rights reserved.

Role of N-S strike-slip faulting in structuring of north-eastern Tunisia; geodynamic implications

NASA Astrophysics Data System (ADS)

Arfaoui, Aymen; Soumaya, Abdelkader; Ben Ayed, Noureddine; Delvaux, Damien; Ghanmi, Mohamed; Kadri, Ali; Zargouni, Fouad

2017-05-01

Three major compressional events characterized by folding, thrusting and strike-slip faulting occurred in the Eocene, Late Miocene and Quaternary along the NE Tunisian domain between Bou Kornine-Ressas-Msella and Cap Bon Peninsula. During the Plio-Quaternary, the Grombalia and Mornag grabens show a maximum of collapse in parallelism with the NNW-SSE SHmax direction and developed as 3rd order distensives zones within a global compressional regime. Using existing tectonic and geophysical data supplemented by new fault-kinematic observations, we show that Cenozoic deformation of the Mesozoic sedimentary sequences is dominated by first order N-S faults reactivation, this sinistral wrench system is responsible for the formation of strike-slip duplexes, thrusts, folds and grabens. Following our new structural interpretation, the major faults of N-S Axis, Bou Kornine-Ressas-Messella (MRB) and Hammamet-Korbous (HK) form an N-S first order compressive relay within a left lateral strike-slip duplex. The N-S master MRB fault is dominated by contractional imbricate fans, while the parallel HK fault is characterized by a trailing of extensional imbricate fans. The Eocene and Miocene compression phases in the study area caused sinistral strike-slip reactivation of pre-existing N-S faults, reverse reactivation of NE-SW trending faults and normal-oblique reactivation of NW-SE faults, creating a NE-SW to N-S trending system of east-verging folds and overlaps. Existing seismic tomography images suggest a key role for the lithospheric subvertical tear or STEP fault (Slab Transfer Edge Propagator) evidenced below this region on the development of the MRB and the HK relay zone. The presence of extensive syntectonic Pliocene on top of this crustal scale fault may be the result of a recent lithospheric vertical kinematic of this STEP fault, due to the rollback and lateral migration of the Calabrian slab eastward.

Factors influencing seedling emergence of three global invaders in greenhouses representing major eco-regions of the world.

PubMed

Arfin-Khan, M A S; Vetter, V M S; Reshi, Z A; Dar, P A; Jentsch, A

2018-05-01

Successful germination and seedling emergence in new environments are crucial first steps in the life history of global plant invaders and thus play a key role in processes of range expansion. We examined the germination and seedling emergence success of three global plant invaders - Lupinus polyphyllus, Senecio inaequidens and Verbascum thapsus - in greenhouses and climate chambers under climate regimes corresponding to seven eco-regions. Seed materials were collected from one non-native population for L. polyphyllus and S. inaequidens, and from 12 populations for V. thapsus (six natives and six non-natives). Experimental climates had significant effects on species responses. No species germinated in the dry (humidity ≤ 50%) and cool (≤ 5 °C) experimental climates. But all species germinated and emerged in two moderately cool (12-19 °C) and in three warm (24-27 °C) experimental climates. In general, V. thapsus showed higher fitness than S. inaequidens and L. polyphyllus. The climate of the seed source region influenced responses of native and non-native populations of V. thapsus. Non-native populations of V. thapsus, originating from the warmer seed source, showed higher performance in warm experimental climates and lower performance in moderately cool experimental climates compared to native populations. Responses of V. thapsus populations were also related to precipitation of the seed source region in moderately dry experimental climates. The warm, semi-arid and humid experimental climates are suitable for the crucial first steps of invasion success for L. polyphyllus, S. inaequidens and V. thapsus. The species adaptation to its source region modified the responses of our studied plants under different experimental climates representing major eco-regions of the world. © 2018 German Society for Plant Sciences and The Royal Botanical Society of the Netherlands.

Understanding, Developing, and Writing Effective IEPs: A Step-by-Step Guide for Educators

ERIC Educational Resources Information Center

Pierangelo, Roger; Giuliani, George A.

2007-01-01

Creating and evaluating Individualized Education Programs (IEPs) for students with disabilities is a major responsibility for teachers and school leaders, yet the process involves legal components not always understood by educators. In "Understanding, Developing, and Writing Effective IEPs," legal and special education experts Roger…

Is lower peripheral information weighted differently as a function of step number during step climbing?

PubMed

Graci, Valentina; Rabuffetti, Marco; Frigo, Carlo; Ferrarin, Maurizio

2017-02-01

The importance of peripheral visual information during stair climbing and how peripheral visual information is weighted as a function of step number during step climbing is unclear. Previous authors postulated that the knowledge of predictable characteristics of the steps may decrease reliance on foveal vision and transfer the online visual guidance of stair climbing to peripheral vision. Hence the aim of this study was to investigate if and how the occlusion of the lower peripheral visual field influenced stair climbing and if peripheral visual information was weighted differently between steps. Ten young adult male participants ascended a 5-step staircase under 2 visual conditions: full vision (FV) and lower visual occlusion (LO). Kinematic data (100Hz) were collected. The effect of Vision and Step condition on vertical forefoot clearance was examined with a Repeated Measures 2-way ANOVA. Tukey's HSD test was used for post-hoc comparisons. A significant interaction Vision x Step and main effect of Step were found (p<=0.04): vertical forefoot clearance was greater in LO compared to FV condition only on the 1st and the 2nd steps (p<0.013) and on the last step compared to the other steps (p<0.01). These findings suggest that online peripheral visual information is more relevant when negotiating the first two steps, rather than the end of a staircase and that the steps subsequent the first few ones may require different information likely based on proprioception or working memory of the step height. Copyright © 2016 Elsevier B.V. All rights reserved.

Modular Training for Robot-Assisted Radical Prostatectomy: Where to Begin?

PubMed

Lovegrove, Catherine; Ahmed, Kamran; Novara, Giacomo; Guru, Khurshid; Mottrie, Alex; Challacombe, Ben; der Poel, Henk Van; Peabody, James; Dasgupta, Prokar

Effective training is paramount for patient safety. Modular training entails advancing through surgical steps of increasing difficulty. This study aimed to construct a modular training pathway for use in robot-assisted radical prostatectomy (RARP). It aims to identify the sequence of procedural steps that are learnt before surgeons are able to perform a full procedure without an intervention from mentor. This is a multi-institutional, prospective, observational, longitudinal study. We used a validated training tool (RARP Score). Data regarding surgeons' stage of training and progress were collected for analysis. A modular training pathway was constructed with consensus on the level of difficulty and evaluation of individual steps. We identified and recorded the sequence of steps performed by fellows during their learning curves. We included 15 urology fellows from UK, Europe, and Australia. A total of 15 surgeons were assessed by mentors in 425 RARP cases over 8 months (range: 7-79) across 15 international centers. There were substantial differences in the sequence of RARP steps according to the chronology of the procedure, difficulty level, and the order in which surgeons actually learned steps. Steps were not attempted in chronological order. The greater the difficulty, the later the cohort first undertook the step (p = 0.021). The cohort undertook steps of difficulty level I at median case number 1. Steps of difficulty levels II, III, and IV showed more variation in median case number of the first attempt. We recommend that, in the operating theater, steps be learned in order of increasing difficulty. A new modular training route has been designed. This incorporates the steps of RARP with the following order of priority: difficulty level > median case number of first attempt > most frequently undertaken in surgical training. An evidence-based modular training pathway has been developed that facilitates a safe introduction to RARP for novice surgeons. Copyright © 2017 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Ground Reaction Forces of the Lead and Trail Limbs when Stepping Over an Obstacle

PubMed Central

Bovonsunthonchai, Sunee; Khobkhun, Fuengfa; Vachalathiti, Roongtiwa

2015-01-01

Background Precise force generation and absorption during stepping over different obstacles need to be quantified for task accomplishment. This study aimed to quantify how the lead limb (LL) and trail limb (TL) generate and absorb forces while stepping over obstacle of various heights. Material/Methods Thirteen healthy young women participated in the study. Force data were collected from 2 force plates when participants stepped over obstacles. Two limbs (right LL and left TL) and 4 conditions of stepping (no obstacle, stepping over 5 cm, 20 cm, and 30 cm obstacle heights) were tested for main effect and interaction effect by 2-way ANOVA. Paired t-test and 1-way repeated-measure ANOVA were used to compare differences of variables between limbs and among stepping conditions, respectively. The main effects on the limb were found in first peak vertical force, minimum vertical force, propulsive peak force, and propulsive impulse. Results Significant main effects of condition were found in time to minimum force, time to the second peak force, time to propulsive peak force, first peak vertical force, braking peak force, propulsive peak force, vertical impulse, braking impulse, and propulsive impulse. Interaction effects of limb and condition were found in first peak vertical force, propulsive peak force, braking impulse, and propulsive impulse. Conclusions Adaptations of force generation in the LL and TL were found to involve adaptability to altered external environment during stepping in healthy young adults. PMID:26169293

Interaction of tetraethoxysilane with OH-terminated SiO2 (0 0 1) surface: A first principles study

NASA Astrophysics Data System (ADS)

Deng, Xiaodi; Song, Yixu; Li, Jinchun; Pu, Yikang

2014-06-01

First principles calculates have been performed to investigate the surface reaction mechanism of tetraethoxysilane (TEOS) with fully hydroxylated SiO2(0 0 1) substrate. In semiconductor industry, this is the key step to understand and control the SiO2 film growth in chemical vapor deposition (CVD) and atomic layer deposition (ALD) processes. During the calculation, we proposed a model which breaks the surface dissociative chemisorption into two steps and we calculated the activation barriers and thermochemical energies for each step. Our calculation result for step one shows that the first half reaction is thermodynamically favorable. For the second half reaction, we systematically studied the two potential reaction pathways. The comparing result indicates that the pathway which is more energetically favorable will lead to formation of crystalline SiO2 films while the other will lead to formation of disordered SiO2 films.

Mentoring in Native American Communities using STEM Concepts

NASA Astrophysics Data System (ADS)

Angrum, A.; Alexander, C. J.; Martin, M.

2011-12-01

In this paper we will present a concept for mentoring built on STEM principles, and applied to the Native American community in Chinle, AZ. Effective mentoring includes being sensitive, listening to, and advising mentees based upon a 'correct' appreciation not only of their needs but also of the desires of the community they come from. Our project is an outreach effort on the part of NASA's contribution to the International Rosetta mission. Our initial program design incorporated ambitious STEM materials developed by NASA/JPL for other communities that excite and engage future generations in geoscience careers, to be re-packaged and brought to the Navajo community in Chinle. We were cognizant of the communities' emphasis on the need to know themselves and their own culture when teaching their students. Recognizing that one of the most important near-term problems in Native American communities across the country is preservation of aboriginal language, a first step in our program involved defining STEM vocabulary. Community participation was required to identify existing words, write a STEM thesaurus, and also define contemporary words (what we called 'NASA words') that have no equivalent in the native tongue. This step critically involved obtaining approval of new words from tribal Elders. Finally, our objective was to put this newly defined STEM vocabulary to work, helping the kids to learn STEM curriculum in their own language. The communities' response to our approach was guarded interest, an invitation to return for further work, and finally a request that we co-sponsor a Summer Science Academy that was not focused on the subjects of space exploration originally envisioned by the project. Thus a first lesson learned was that ambitious material might not be the first step to a sustained educational program on the reservation. Understanding the end-users' environment, requirements and constraints is a major component to sustainability. After several months of visits to the community, listening to individuals, educators and administrators we have been able to successfully sponsor a program that is responsive to the district's requests, and well received by the community. Importantly, these steps resulted in (a) the project gaining a better understanding of qualitative needs in the community and (b) better techniques to enhance the quality and efficacy of the program. Enhancements for future summer academies include: college preparation and recruitment workshops; targeted teacher training; quantitative homework and exercises -- rehearsing kids in the dialog of numbers; laboratory work co-sponsored by the local tribal technical college that will allow kids to potentially perform environmental studies on their own land. Working as partners creates a relationship of trust, which opens doors of mutual understanding for both the community and project, allowing us to 'mentor' the curriculum requested by the district. Working within and understanding the community paradigm is a critical first step building a bridge for Native American students that ultimately will help them gain access to geoscience education and the workforce, and survive in a multi-cultural world.

Van Allen Discovery Most Important

NASA Technical Reports Server (NTRS)

Jastrow, R.

1959-01-01

The first step toward the exploration of space occurred approximately 22 months ago as a part of the International Geophysical Year. In the short interval since October, 1957, the new tools of research, the satellite and the space rocket, have produced two unexpected results of fundamental scientific importance. First, instruments placed in the Explorer satellites by James A. Van Allen have revealed the existence of layers of energetic particles in the outer atmosphere. This discovery constitutes the most significant research achievement of the IGY satellite program. The layers may provide the explanation for the aurora and other geophysical phenomena, and they will also influence the design of vehicles for manned space flight, whose occupants must be shielded against their harmful biological effects. Second, the shape of the earth has been determined very accurately with the aid of data from the first Vanguard. As a result of this investigation, we have found that our planet tends toward the shape of a pear, with its stem at the North Pole. This discovery may produce major changes in our ideas on the interior structure of the earth.

Photomask applications of traceable atomic force microscope dimensional metrology at NIST

NASA Astrophysics Data System (ADS)

Dixson, Ronald; Orji, Ndubuisi G.; Potzick, James; Fu, Joseph; Allen, Richard A.; Cresswell, Michael; Smith, Stewart; Walton, Anthony J.; Tsiamis, Andreas

2007-10-01

The National Institute of Standards and Technology (NIST) has a multifaceted program in atomic force microscope (AFM) dimensional metrology. Three major instruments are being used for traceable measurements. The first is a custom in-house metrology AFM, called the calibrated AFM (C-AFM), the second is the first generation of commercially available critical dimension AFM (CD-AFM), and the third is a current generation CD-AFM at SEMATECH - for which NIST has established the calibration and uncertainties. All of these instruments have useful applications in photomask metrology. Linewidth reference metrology is an important application of CD-AFM. We have performed a preliminary comparison of linewidths measured by CD-AFM and by electrical resistance metrology on a binary mask. For the ten selected test structures with on-mask linewidths between 350 nm and 600 nm, most of the observed differences were less than 5 nm, and all of them were less than 10 nm. The offsets were often within the estimated uncertainties of the AFM measurements, without accounting for the effect of linewidth roughness or the uncertainties of electrical measurements. The most recent release of the NIST photomask standard - which is Standard Reference Material (SRM) 2059 - was also supported by CD-AFM reference measurements. We review the recent advances in AFM linewidth metrology that will reduce the uncertainty of AFM measurements on this and future generations of the NIST photomask standard. The NIST C-AFM has displacement metrology for all three axes traceable to the 633 nm wavelength of the iodine-stabilized He-Ne laser. One of the important applications of the C-AFM is step height metrology, which has some relevance to phase shift calibration. In the current generation of the system, the approximate level of relative standard uncertainty for step height measurements at the 100 nm scale is 0.1 %. We discuss the monitor history of a 290 nm step height, originally measured on the C-AFM with a 1.9 nm (k = 2) expanded uncertainty, and describe advances that bring the step height uncertainty of recent measurements to an estimated 0.6 nm (k = 2). Based on this work, we expect to be able to reduce the topographic component of phase uncertainty in alternating aperture phase shift masks (AAPSM) by a factor of three compared to current calibrations based on earlier generation step height references.

Future aircraft networks and schedules

NASA Astrophysics Data System (ADS)

Shu, Yan

2011-07-01

Because of the importance of air transportation scheduling, the emergence of small aircraft and the vision of future fuel-efficient aircraft, this thesis has focused on the study of aircraft scheduling and network design involving multiple types of aircraft and flight services. It develops models and solution algorithms for the schedule design problem and analyzes the computational results. First, based on the current development of small aircraft and on-demand flight services, this thesis expands a business model for integrating on-demand flight services with the traditional scheduled flight services. This thesis proposes a three-step approach to the design of aircraft schedules and networks from scratch under the model. In the first step, both a frequency assignment model for scheduled flights that incorporates a passenger path choice model and a frequency assignment model for on-demand flights that incorporates a passenger mode choice model are created. In the second step, a rough fleet assignment model that determines a set of flight legs, each of which is assigned an aircraft type and a rough departure time is constructed. In the third step, a timetable model that determines an exact departure time for each flight leg is developed. Based on the models proposed in the three steps, this thesis creates schedule design instances that involve almost all the major airports and markets in the United States. The instances of the frequency assignment model created in this thesis are large-scale non-convex mixed-integer programming problems, and this dissertation develops an overall network structure and proposes iterative algorithms for solving these instances. The instances of both the rough fleet assignment model and the timetable model created in this thesis are large-scale mixed-integer programming problems, and this dissertation develops subproblem schemes for solving these instances. Based on these solution algorithms, this dissertation also presents computational results of these large-scale instances. To validate the models and solution algorithms developed, this thesis also compares the daily flight schedules that it designs with the schedules of the existing airlines. Furthermore, it creates instances that represent different economic and fuel-prices conditions and derives schedules under these different conditions. In addition, it discusses the implication of using new aircraft in the future flight schedules. Finally, future research in three areas---model, computational method, and simulation for validation---is proposed.

Gaussian Radial Basis Function for Efficient Computation of Forest Indirect Illumination

NASA Astrophysics Data System (ADS)

Abbas, Fayçal; Babahenini, Mohamed Chaouki

2018-06-01

Global illumination of natural scenes in real time like forests is one of the most complex problems to solve, because the multiple inter-reflections between the light and material of the objects composing the scene. The major problem that arises is the problem of visibility computation. In fact, the computing of visibility is carried out for all the set of leaves visible from the center of a given leaf, given the enormous number of leaves present in a tree, this computation performed for each leaf of the tree which also reduces performance. We describe a new approach that approximates visibility queries, which precede in two steps. The first step is to generate point cloud representing the foliage. We assume that the point cloud is composed of two classes (visible, not-visible) non-linearly separable. The second step is to perform a point cloud classification by applying the Gaussian radial basis function, which measures the similarity in term of distance between each leaf and a landmark leaf. It allows approximating the visibility requests to extract the leaves that will be used to calculate the amount of indirect illumination exchanged between neighbor leaves. Our approach allows efficiently treat the light exchanges in the scene of a forest, it allows a fast computation and produces images of good visual quality, all this takes advantage of the immense power of computation of the GPU.

Dual Adaptive Filtering by Optimal Projection Applied to Filter Muscle Artifacts on EEG and Comparative Study

PubMed Central

Peyrodie, Laurent; Szurhaj, William; Bolo, Nicolas; Pinti, Antonio; Gallois, Philippe

2014-01-01

Muscle artifacts constitute one of the major problems in electroencephalogram (EEG) examinations, particularly for the diagnosis of epilepsy, where pathological rhythms occur within the same frequency bands as those of artifacts. This paper proposes to use the method dual adaptive filtering by optimal projection (DAFOP) to automatically remove artifacts while preserving true cerebral signals. DAFOP is a two-step method. The first step consists in applying the common spatial pattern (CSP) method to two frequency windows to identify the slowest components which will be considered as cerebral sources. The two frequency windows are defined by optimizing convolutional filters. The second step consists in using a regression method to reconstruct the signal independently within various frequency windows. This method was evaluated by two neurologists on a selection of 114 pages with muscle artifacts, from 20 clinical recordings of awake and sleeping adults, subject to pathological signals and epileptic seizures. A blind comparison was then conducted with the canonical correlation analysis (CCA) method and conventional low-pass filtering at 30 Hz. The filtering rate was 84.3% for muscle artifacts with a 6.4% reduction of cerebral signals even for the fastest waves. DAFOP was found to be significantly more efficient than CCA and 30 Hz filters. The DAFOP method is fast and automatic and can be easily used in clinical EEG recordings. PMID:25298967

Source apportionment and a novel approach of estimating regional contributions to ambient PM2.5 in Haikou, China.

PubMed

Liu, Baoshuang; Li, Tingkun; Yang, Jiamei; Wu, Jianhui; Wang, Jiao; Gao, Jixin; Bi, Xiaohui; Feng, Yinchang; Zhang, Yufen; Yang, Haihang

2017-04-01

A novel approach was developed to estimate regional contributions to ambient PM 2.5 in Haikou, China. In this paper, the investigation was divided into two main steps. The first step: analysing the characteristics of the chemical compositions of ambient PM 2.5 , as well as the source profiles, and then conducting source apportionments by using the CMB and CMB-Iteration models. The second step: the development of estimation approaches for regional contributions in terms of local features of Haikou and the results of source apportionment, and estimating regional contributions to ambient PM 2.5 in Haikou by this new approach. The results indicate that secondary sulphate, resuspended dust and vehicle exhaust were the major sources of ambient PM 2.5 in Haikou, contributing 9.9-21.4%, 10.1-19.0% and 10.5-20.2%, respectively. Regional contributions to ambient PM 2.5 in Haikou in spring, autumn and winter were 22.5%, 11.6% and 32.5%, respectively. The regional contribution in summer was assumed to be zero according to the better atmospheric quality and assumptions of this new estimation approach. The higher regional contribution in winter might be mainly attributable to the transport of polluted air originating in mainland China, especially from the north, where coal is burned for heating in winter. Copyright © 2017 Elsevier Ltd. All rights reserved.

Diagnostic, design and implementation of an integrated model of care in France: a bottom-up process with a continuous leadership

PubMed Central

de Stampa, Matthieu; Vedel, Isabelle; Mauriat, Claire; Bagaragaza, Emmanuel; Routelous, Christelle; Bergman, Howard; Lapointe, Liette; Cassou, Bernard; Ankri, Joel; Henrard, Jean-Claude

2010-01-01

Purpose To present an innovative bottom-up and pragmatic strategy used to implement a new integrated care model in France for community-dwelling elderly people with complex needs. Context Sustaining integrated care is difficult, in large part because of problems encountered securing the participation of health care and social service professionals and, in particular, general practitioners (GPs). Case description In the first step, a diagnostic study was conducted with face-to-face interviews to gather data on current practices from a sample of health and social stakeholders working with elderly people. In the second step, an integrated care model called Coordination Personnes Agées (COPA) was designed by the same major stakeholders in order to define its detailed characteristics based on the local context. In the third step, the model was implemented in two phases: adoption and maintenance. This strategy was carried out by a continuous and flexible leadership throughout the process, initially with a mixed leadership (clinician and researcher) followed by a double one (clinician and managers of services) in the implementation phase. Conclusions The implementation of this bottom-up and pragmatic strategy relied on establishing a collaborative dynamic among health and social stakeholders. This enhanced their involvement throughout the implementation phase, particularly among the GPs, and allowed them to support the change practices and services arrangements.

Sensitivity and specificity: twin goals of proteomics assays. Can they be combined?

PubMed

Wilson, Robert

2013-04-01

A major ambition of proteomics is the provision of assays that can diagnose disease and monitor therapies. These assays are required to be sensitive and specific for individual proteins, and in most cases to quantify more than one protein in the same sample. The two main technologies currently used for proteomics assays are based on mass spectrometry and panels of affinity molecules such as antibodies. In the first part of this review the most sensitive existing assays based on these technologies are described and compared with the gold standard of ELISA. Analytical sensitivity is defined and related to the limit of detection, and analytical specificity is defined and shown to depend on molecular proofreading steps, similar to those applied in living systems whenever there is a need for high fidelity. It is shown that at present neither mass spectrometry nor panels of affinity molecules offer the necessary combination of sensitivity and specificity required for multiplexed assays. In the second part of this review the growing numbers of assays that use additional proofreading steps to combine sensitivity with specificity are described. These include assays based on proximity ligation and slow off-rate modified aptamers. Finally the review considers what improvements might be possible in the near future, and concludes that further development of proteomics assays incorporating advanced proofreading steps are most likely to provide the necessary combination of sensitivity and specificity, without incurring high development costs.

Development and usability of a computer-tailored pedometer-based physical activity advice for breast cancer survivors.

PubMed

De Cocker, K; Charlier, C; Van Hoof, E; Pauwels, E; Lechner, L; Bourgois, J; Spittaels, H; Vandelanotte, C; De Bourdeaudhuij, I

2015-09-01

This observational study aimed to adapt a computer-tailored step advice for the general population into a feasible advice for breast cancer survivors and to test its usability. First, several adaptations were made to the original design (adding cancer-related physical activity (PA) barriers and beliefs, and self-management strategies to improve survivors' personal control). Second, the adapted advice was evaluated in two phases: (1) a usability testing in healthy women (n = 3) and survivors (n = 6); and (2) a process evaluation during 3 weeks in breast cancer survivors (n = 8). Preliminary usability testing revealed no problems during logging-in; however, three survivors misinterpreted some questions. After refining the questionnaire and advice, survivors evaluated the advice as interesting, attractive to read, comprehensible and credible. Inactive survivors found the advice novel, but too long. The process evaluation indicated that the majority of the women (n = 5/8) reported increased steps. Monitoring step counts by using a pedometer was perceived as an important motivator to be more active. To conclude, this study provides initial support for the usability and acceptability of a computer-tailored pedometer-based PA advice for breast cancer survivors. After testing efficacy and effectiveness of this intervention, this tool can broaden the reach of PA promotion in breast cancer survivors. © 2014 John Wiley & Sons Ltd.

Text vectorization based on character recognition and character stroke modeling

NASA Astrophysics Data System (ADS)

Fan, Zhigang; Zhou, Bingfeng; Tse, Francis; Mu, Yadong; He, Tao

2014-03-01

In this paper, a text vectorization method is proposed using OCR (Optical Character Recognition) and character stroke modeling. This is based on the observation that for a particular character, its font glyphs may have different shapes, but often share same stroke structures. Like many other methods, the proposed algorithm contains two procedures, dominant point determination and data fitting. The first one partitions the outlines into segments and second one fits a curve to each segment. In the proposed method, the dominant points are classified as "major" (specifying stroke structures) and "minor" (specifying serif shapes). A set of rules (parameters) are determined offline specifying for each character the number of major and minor dominant points and for each dominant point the detection and fitting parameters (projection directions, boundary conditions and smoothness). For minor points, multiple sets of parameters could be used for different fonts. During operation, OCR is performed and the parameters associated with the recognized character are selected. Both major and minor dominant points are detected as a maximization process as specified by the parameter set. For minor points, an additional step could be performed to test the competing hypothesis and detect degenerated cases.

An exploratory study with preliminary results: The development and evaluation of a Genetics Concept Inventory

NASA Astrophysics Data System (ADS)

Hott, Adam M.

Modern science education reform includes the development of standards and recommendations for content as well as the development and evaluation of pedagogy, but demonstrates limited assessment of student knowledge. Student knowledge assessment is an important factor in measuring the scientific literacy of current students. Concept inventories have been developed and used for the past fourteen years to assess non-science major student conceptual understanding of a content area. Inventories have been developed in the fields of physics, astronomy, chemistry and biology. The development and evaluation of a Genetics Concept Inventory (GCI) is presented here. The reliability estimate of 0.62 is supported by a respected panel of genetics educators' revisions, no significant gender bias, and the ability of junior and senior biology majors to outperform the non-science majors. Pretest/Posttest comparisons show a significant increase in five of six genetics content areas as well as a 9% increase on the overall percent score for the instrument. Although the Genetics Concept Inventory presented here needs further modification and testing, it is the first step in the development of a quality assessment tool for genetics content.

Organization of descending neurons in Drosophila melanogaster

PubMed Central

Hsu, Cynthia T.; Bhandawat, Vikas

2016-01-01

Neural processing in the brain controls behavior through descending neurons (DNs) - neurons which carry signals from the brain to the spinal cord (or thoracic ganglia in insects). Because DNs arise from multiple circuits in the brain, the numerical simplicity and availability of genetic tools make Drosophila a tractable model for understanding descending motor control. As a first step towards a comprehensive study of descending motor control, here we estimate the number and distribution of DNs in the Drosophila brain. We labeled DNs by backfilling them with dextran dye applied to the neck connective and estimated that there are ~1100 DNs distributed in 6 clusters in Drosophila. To assess the distribution of DNs by neurotransmitters, we labeled DNs in flies in which neurons expressing the major neurotransmitters were also labeled. We found DNs belonging to every neurotransmitter class we tested: acetylcholine, GABA, glutamate, serotonin, dopamine and octopamine. Both the major excitatory neurotransmitter (acetylcholine) and the major inhibitory neurotransmitter (GABA) are employed equally; this stands in contrast to vertebrate DNs which are predominantly excitatory. By comparing the distribution of DNs in Drosophila to those reported previously in other insects, we conclude that the organization of DNs in insects is highly conserved. PMID:26837716

Organization of descending neurons in Drosophila melanogaster.

PubMed

Hsu, Cynthia T; Bhandawat, Vikas

2016-02-03

Neural processing in the brain controls behavior through descending neurons (DNs) - neurons which carry signals from the brain to the spinal cord (or thoracic ganglia in insects). Because DNs arise from multiple circuits in the brain, the numerical simplicity and availability of genetic tools make Drosophila a tractable model for understanding descending motor control. As a first step towards a comprehensive study of descending motor control, here we estimate the number and distribution of DNs in the Drosophila brain. We labeled DNs by backfilling them with dextran dye applied to the neck connective and estimated that there are ~1100 DNs distributed in 6 clusters in Drosophila. To assess the distribution of DNs by neurotransmitters, we labeled DNs in flies in which neurons expressing the major neurotransmitters were also labeled. We found DNs belonging to every neurotransmitter class we tested: acetylcholine, GABA, glutamate, serotonin, dopamine and octopamine. Both the major excitatory neurotransmitter (acetylcholine) and the major inhibitory neurotransmitter (GABA) are employed equally; this stands in contrast to vertebrate DNs which are predominantly excitatory. By comparing the distribution of DNs in Drosophila to those reported previously in other insects, we conclude that the organization of DNs in insects is highly conserved.

A comprehensive survey of fruit grading systems for tropical fruits of Maharashtra.

PubMed

Khoje, Suchitra A; Bodhe, S K

2015-01-01

It is said that the backbone of Indian economy is agriculture. The contribution of the agriculture sector to the national GDP (Gross Domestic Products) was 14.6% in the year 2010. To attain a growth rate equivalent to that of industry (viz., about 9%), it is highly mandatory for Indian agriculture to modernize and use automation at various stages of cultivation and post-harvesting techniques. The use of computers in assessing the quality of fruits is one of the major activities in post-harvesting technology. As of now, this assessment is majorly done manually, except for a few fruits. Currently, the fruit quality assessment by machine vision in India is still at research level. Major research has been carried out in countries like China, Malaysia, UK, and Netherlands. To suit the Indian market and psychology of Indian farmers, it is necessary to develop indigenous technology. This paper is the first step toward evaluating the research carried out by the research community all over world for tropical fruits. For the purpose of survey, we have concentrated on the tropical fruits of the state of Maharashtra, while keeping in focus of the review image processing algorithms.

Supercritical Fluid Atomic Layer Deposition: Base-Catalyzed Deposition of SiO2.

PubMed

Kalan, Roghi E; McCool, Benjamin A; Tripp, Carl P

2016-07-19

An in situ FTIR thin film technique was used to study the sequential atomic layer deposition (ALD) reactions of SiCl4, tetraethyl orthosilicate (TEOS) precursors, and water on nonporous silica powder using supercritical CO2 (sc-CO2) as the solvent. The IR work on nonporous powders was used to identify the reaction sequence for using a sc-CO2-based ALD to tune the pore size of a mesoporous silica. The IR studies showed that only trace adsorption of SiCl4 occurred on the silica, and this was due to the desiccating power of sc-CO2 to remove the adsorbed water from the surface. This was overcome by employing a three-step reaction scheme involving a first step of adsorption of triethylamine (TEA), followed by SiCl4 and then H2O. For TEOS, a three-step reaction sequence using TEA, TEOS, and then water offered no advantage, as the TEOS simply displaced the TEA from the silica surface. A two-step reaction involving the addition of TEOS followed by H2O in a second step did lead to silica film growth. However, higher growth rates were obtained when using a mixture of TEOS/TEA in the first step. The hydrolysis of the adsorbed TEOS was also much slower than that of the adsorbed SiCl4, and this was overcome by using a mixture of water/TEA during the second step. While the three-step process with SiCl4 showed a higher linear growth rate than obtained with two-step process using TEOS/TEA, its use was not practical, as the HCl generated led to corrosion of our sc-CO2 delivery system. However, when applying the two-step ALD reaction using TEOS on an MCM-41 powder, a 0.21 nm decrease in pore diameter was obtained after the first ALD cycle whereas further ALD cycles did not lead to further pore size reduction. This was attributed to the difficulty in removal of the H2O in the pores after the first cycle.

A 3D Kinematic Measurement of Knee Prosthesis Using X-ray Projection Images

NASA Astrophysics Data System (ADS)

Hirokawa, Shunji; Ariyoshi, Shogo; Hossain, Mohammad Abrar

We have developed a technique for estimating 3D motion of knee prosthesis from its 2D perspective projections. As Fourier descriptors were used for compact representation of library templates and contours extracted from the prosthetic X-ray images, the entire silhouette contour of each prosthetic component was required. This caused such a problem as our algorithm did not function when the silhouettes of tibio and femoral components overlapped with each other. Here we planned a novel method to overcome it; which was processed in two steps. First, the missing part of silhouette contour due to overlap was interpolated using a free-formed curvature such as Bezier. Then the first step position/orientation estimation was performed. In the next step, a clipping window was set in the projective coordinate so as to separate the overlapped silhouette drawn using the first step estimates. After that the localized library whose templates were clipped in shape was prepared and the second step estimation was performed. Computer model simulation demonstrated sufficient accuracies of position/orientation estimation even for overlapped silhouettes; equivalent to those without overlap.

A Fuzzy Goal Programming for a Multi-Depot Distribution Problem

NASA Astrophysics Data System (ADS)

Nunkaew, Wuttinan; Phruksaphanrat, Busaba

2010-10-01

A fuzzy goal programming model for solving a Multi-Depot Distribution Problem (MDDP) is proposed in this research. This effective proposed model is applied for solving in the first step of Assignment First-Routing Second (AFRS) approach. Practically, a basic transportation model is firstly chosen to solve this kind of problem in the assignment step. After that the Vehicle Routing Problem (VRP) model is used to compute the delivery cost in the routing step. However, in the basic transportation model, only depot to customer relationship is concerned. In addition, the consideration of customer to customer relationship should also be considered since this relationship exists in the routing step. Both considerations of relationships are solved using Preemptive Fuzzy Goal Programming (P-FGP). The first fuzzy goal is set by a total transportation cost and the second fuzzy goal is set by a satisfactory level of the overall independence value. A case study is used for describing the effectiveness of the proposed model. Results from the proposed model are compared with the basic transportation model that has previously been used in this company. The proposed model can reduce the actual delivery cost in the routing step owing to the better result in the assignment step. Defining fuzzy goals by membership functions are more realistic than crisps. Furthermore, flexibility to adjust goals and an acceptable satisfactory level for decision maker can also be increased and the optimal solution can be obtained.

Enantioselective Total Synthesis of (−)-Minovincine in Nine Chemical Steps: An Approach to Ketone Activation in Cascade Catalysis

PubMed Central

Laforteza, Brian N.; Pickworth, Mark

2014-01-01

More cycling–fewer steps The first enantioselective total synthesis of (−)-minovincine has been accomplished in nine chemical steps and 13% overall yield. A novel, one-step Diels–Alder/β-elimination/conjugate addition organocascade sequence allowed rapid access to the central tetracyclic core in an asymmetric manner. PMID:24000234

49 CFR 399.207 - Truck and truck-tractor access requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... requirements: (1) Vertical height. All measurements of vertical height shall be made from ground level with the... vertical height of the first step shall be no more than 609 millimeters (24 inches) from ground level. (3... requirement. The step need not retain the disc at rest. (5) Step strength. Each step must withstand a vertical...

49 CFR 399.207 - Truck and truck-tractor access requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... requirements: (1) Vertical height. All measurements of vertical height shall be made from ground level with the... vertical height of the first step shall be no more than 609 millimeters (24 inches) from ground level. (3... requirement. The step need not retain the disc at rest. (5) Step strength. Each step must withstand a vertical...

49 CFR 399.207 - Truck and truck-tractor access requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... requirements: (1) Vertical height. All measurements of vertical height shall be made from ground level with the... vertical height of the first step shall be no more than 609 millimeters (24 inches) from ground level. (3... requirement. The step need not retain the disc at rest. (5) Step strength. Each step must withstand a vertical...

49 CFR 399.207 - Truck and truck-tractor access requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... requirements: (1) Vertical height. All measurements of vertical height shall be made from ground level with the... vertical height of the first step shall be no more than 609 millimeters (24 inches) from ground level. (3... requirement. The step need not retain the disc at rest. (5) Step strength. Each step must withstand a vertical...

Tectonic and metallogenic model for northeast Asia

USGS Publications Warehouse

Parfenov, Leonid M.; Nokleberg, Warren J.; Berzin, Nikolai A.; Badarch, Gombosuren; Dril, Sergy I.; Gerel, Ochir; Goryachev, Nikolai A.; Khanchuk, Alexander I.; Kuz'min, Mikhail I.; Prokopiev, Andrei V.; Ratkin, Vladimir V.; Rodionov, Sergey M.; Scotese, Christopher R.; Shpikerman, Vladimir I.; Timofeev, Vladimir F.; Tomurtogoo, Onongin; Yan, Hongquan; Nokleberg, Warren J.

2011-01-01

This document describes the digital files in this report that contains a tectonic and metallogenic model for Northeast Asia. The report also contains background materials. This tectonic and metallogenic model and other materials on this report are derived from (1) an extensive USGS Professional Paper, 1765, on the metallogenesis and tectonics of Northeast Asia that is available on the Internet at http://pubs.usgs.gov/pp/1765/; and (2) the Russian Far East parts of an extensive USGS Professional Paper, 1697, on the metallogenesis and tectonics of the Russian Far East, Alaska, and the Canadian Cordillera that is available on the Internet at http://pubs.usgs.gov/pp/pp1697/. The major purpose of the tectonic and metallogenic model is to provide, in movie format, a colorful summary of the complex geology, tectonics, and metallogenesis of the region. To accomplish this goal four steps were taken: (1) 13 time-stage diagrams, from the late Neoproterozoic (850 Ma) through the present (0 Ma), were adapted, generalized, and transformed into color static time-stage diagrams; (2) the 13 time-stage diagrams were placed in a computer morphing program to produce the model; (3) the model was examined and each diagram was successively adapted to preceding and subsequent diagrams to match the size and surface expression of major geologic units; and (4) the final version of the model was produced in successive iterations of steps 2 and 3. The tectonic and metallogenic model and associated materials in this report are derived from a project on the major mineral deposits, metallogenesis, and tectonics of the Northeast Asia and from a preceding project on the metallogenesis and tectonics of the Russian Far East, Alaska, and the Canadian Cordillera. Both projects provide critical information on bedrock geology and geophysics, tectonics, major metalliferous mineral resources, metallogenic patterns, and crustal origin and evolution of mineralizing systems for this region. The major scientific goals and benefits of the projects are to: (1) provide a comprehensive international data base on the mineral resources of the region that is the first extensive knowledge available in English; (2) provide major new interpretations of the origin and crustal evolution of mineralizing systems and their host rocks, thereby enabling enhanced, broad-scale tectonic reconstructions and interpretations; and (3) promote trade and scientific and technical exchanges between North America and eastern Asia.

A Quality Classification System for Young Hardwood Trees - The First Step in Predicting Future Products

Treesearch

David L. Sonderman; Robert L. Brisbin

1978-01-01

Forest managers have no objective way to determine the relative value of culturally treated forest stands in terms of product potential. This paper describes the first step in the development of a quality classification system based on the measurement of individual tree characteristics for young hardwood stands.

Fox Valley Technical College Quality First Process Model.

ERIC Educational Resources Information Center

Fox Valley Technical Coll., Appleton, WI.

An overview is provided of the Quality First Process Model developed by Fox Valley Technical College (FVTC), Wisconsin, to provide guidelines for quality instruction and service consistent with the highest educational standards. The 16-step model involves activities that should be adaptable to any organization. The steps of the quality model are…

Mathematics Games with the Alphabet

ERIC Educational Resources Information Center

Gough, John

2004-01-01

Sometimes the first step towards making a new (mathematics) game is discovering an unexpected possibility in some hitherto unplayed-with piece of equipment. At other times the first step is inventing new equipment. But rarely is any "new" idea for a game wholly original, either as a way of playing a game, or in its equipment. As…

Coupling Admissions and Curricular Data to Predict Medical Student Outcomes

ERIC Educational Resources Information Center

Sesate, Diana B.; Milem, Jeffrey F.; McIntosh, Kadian L.; Bryan, W. Patrick

2017-01-01

The relative impact of admissions factors and curricular measures on the first medical licensing exam (United States Medical Licensing Exam [USMLE] Step 1) scores is examined. The inclusion of first-year and second-year curricular measures nearly doubled the variance explained in Step 1 scores from the amount explained by the combination of…

First Steps to School Readiness: South Carolina's Response to At-Risk Early Childhood Population.

ERIC Educational Resources Information Center

Buford, Rhonda; Stegelin, Dolores A.

2003-01-01

Describes South Carolina's new state early childhood program, First Steps to School Readiness. Includes a profile of the state's at-risk child population, noting poverty and education risk indicators, and describing key program components. The article discusses program oversight, local program partnerships, program funding mechanisms, and local…

Sustainability of a Targeted Intervention Package: First Step to Success in Oregon

ERIC Educational Resources Information Center

Loman, Sheldon L.; Rodriguez, Billie Jo; Horner, Robert H.

2010-01-01

Variables affecting the sustained implementation of evidence-based practices are receiving increased attention. A descriptive analysis of the variables associated with sustained implementation of First Step to Success (FSS), a targeted intervention for young students at risk for behavior disorders, is provided. Measures based on a conceptual model…

Prematriculation variables associated with suboptimal outcomes for the 1994 – 1999 cohort of U.S. medical-school matriculants

PubMed Central

Andriole, Dorothy A.; Jeffe, Donna B.

2010-01-01

Context The relationship between increasing numbers and diversity of medical-school enrollees and the US physician workforce size and composition has not been described. Objective Identify demographic and pre-matriculation factors associated with medical-school matriculants’ outcomes. Design, Setting, and Participants De-identified data for the 1994–1999 national cohort of 97445 matriculants, followed through March 2, 2009 to graduation or withdrawal/dismissal, were analyzed using multivariable logistic regression to identify factors associated with suboptimal outcomes. Main Outcome Measures Academic withdrawal/dismissal, non-academic withdrawal/dismissal, and graduation without first-attempt passing scores on United States Medical Licensing Examination (USMLE) Step 1 and/or Step 2CK, each compared with graduation with first-attempt passing scores on both examinations. Results Of 84018 (86.2%) matriculants, 74494 (88.7%) graduated with first-attempt passing scores on Step 1 and Step 2CK, 6743 (8.0%) graduated without first-attempt passing scores on Step 1 and/or Step 2CK, 1049 (1.2%) withdrew/were dismissed for academic reasons, and 1732 (2.1%) withdrew/were dismissed for non-academic reasons. Variables associated with greater likelihood of graduation without first-attempt passing scores on Step 1 and/or Step 2CK and of academic withdrawal/dismissal included Medical College Admission Test (MCAT) scores (MCAT 18–20 [2.9% of sample]: adjusted odds ratio [OR]=13.06, 95% confidence interval [95% CI]=11.56–14.76 and OR=11.08, 95% CI=8.50–14.45, respectively; MCAT 21–23 [5.6%]: OR=7.52, 95% CI=6.79–8.33 and OR=5.97, 95% CI=4.68–7.62; MCAT 24–26 [13.9%]: OR=4.27, 95% CI=3.92–4.65 and OR=3.56, CI=2.88–4.40) each compared with MCAT>29; Asian/Pacific Islander ([18.2%]: OR=2.15, 95% CI=2.00–2.32 and OR=1.69, 95% CI = 1.37–2.09) or underrepresented minority ([14.9%]: OR=2.30, 95% CI=2.13–2.48 and OR=2.96, 95% CI=2.48–3.54) compared with white race/ethnicity, and premedical debt > $50,000 ([1.0%]:OR=1.68, 95% CI=1.35–2.08 and OR=2.33, 95% CI=1.57–3.46) compared with no debt. Conclusions Lower MCAT scores, non-white race/ethnicity, and premedical debt > $50,000 were independently associated with greater likelihood of academic withdrawal/dismissal and graduating without first-attempt passing scores on USMLE Step 1 and/or Step 2CK. PMID:20841535

Functional-to-form mapping for assembly design automation

NASA Astrophysics Data System (ADS)

Xu, Z. G.; Liu, W. M.; Shen, W. D.; Yang, D. Y.; Liu, T. T.

2017-11-01

Assembly-level function-to-form mapping is the most effective procedure towards design automation. The research work mainly includes: the assembly-level function definitions, product network model and the two-step mapping mechanisms. The function-to-form mapping is divided into two steps, i.e. mapping of function-to-behavior, called the first-step mapping, and the second-step mapping, i.e. mapping of behavior-to-structure. After the first step mapping, the three dimensional transmission chain (or 3D sketch) is studied, and the feasible design computing tools are developed. The mapping procedure is relatively easy to be implemented interactively, but, it is quite difficult to finish it automatically. So manual, semi-automatic, automatic and interactive modification of the mapping model are studied. A mechanical hand F-F mapping process is illustrated to verify the design methodologies.

Data System Design.

ERIC Educational Resources Information Center

Thomas, Charles R.

Some of the major elements of administrative information systems design as applied to higher education are described. Differences between the application of computer technology in the commercial environment and the educational environment are discussed. The major steps in systems development from problem definition through implementation are…

Involvement of α-, γ- and δ-Tocopherol Isomers from
Pumpkin (Cucurbita pepo L.) Seed Oil or Oil Mixtures in
the Biphasic DPPH˙ Disappearance Kinetics

PubMed Central

Broznić, Dalibor; Milin, Čedomila

2016-01-01

Summary The antioxidant activity of three types of pumpkin seed oil or oil mixtures (cold- -pressed, produced from roasted seed paste and salad) produced in the northern part of Croatia and the kinetics of their behaviour as free radical scavengers were investigated using DPPH˙. In addition, the involvement of oil tocopherol isomers (α-, γ- and δ-) in different steps of DPPH˙ disappearance and their impact on the rate of reaction were analysed. The kinetics of DPPH˙ disappearance is a two-step process. In the first step, rapid disappearance of DPPH˙ occurs during the first 11 min of the reaction, depending on the oil type, followed by a slower decline in the second step. To describe DPPH˙ disappearance kinetics, six mathematical models (mono- and biphasic) were tested. Our findings showed that γ- and δ-tocopherols affected DPPH˙ disappearance during the first step, and α-tocopherol in the second step of the reaction. Moreover, α-tocopherol demonstrated 30 times higher antioxidant activity than γ- and δ-tocopherols. The results indicated the biphasic double-exponential behaviour of DPPH˙ disappearance in oil samples, due to the complexity of reactions that involve different tocopherol isomers and proceed through different chemical pathways. PMID:27904410

Involvement of α-, γ- and δ-Tocopherol Isomers from
Pumpkin (Cucurbita pepo L.) Seed Oil or Oil Mixtures in
the Biphasic DPPH˙ Disappearance Kinetics.

PubMed

Broznić, Dalibor; Jurešić, Gordana Čanadi; Milin, Čedomila

2016-06-01

The antioxidant activity of three types of pumpkin seed oil or oil mixtures (cold- -pressed, produced from roasted seed paste and salad) produced in the northern part of Croatia and the kinetics of their behaviour as free radical scavengers were investigated using DPPH˙. In addition, the involvement of oil tocopherol isomers (α-, γ- and δ-) in different steps of DPPH˙ disappearance and their impact on the rate of reaction were analysed. The kinetics of DPPH˙ disappearance is a two-step process. In the first step, rapid disappearance of DPPH˙ occurs during the first 11 min of the reaction, depending on the oil type, followed by a slower decline in the second step. To describe DPPH˙ disappearance kinetics, six mathematical models (mono- and biphasic) were tested. Our findings showed that γ- and δ-tocopherols affected DPPH˙ disappearance during the first step, and α-tocopherol in the second step of the reaction. Moreover, α-tocopherol demonstrated 30 times higher antioxidant activity than γ- and δ-tocopherols. The results indicated the biphasic double-exponential behaviour of DPPH˙ disappearance in oil samples, due to the complexity of reactions that involve different tocopherol isomers and proceed through different chemical pathways.

Nurse Executive Leadership During Organizational Mergers.

PubMed

Piper, Letty Roth; Schneider, Maureen

2015-12-01

The recent growth in hospital mergers and the resultant mergers of nursing service departments (NSDs) have produced a need for chief nursing officers (CNOs) to be aware of implications and anticipated dynamic changes. This article addresses the major issues raised by mergers for NSDs and presents an operational step-by-step checklist for CNOs.

Developing an Integrated Library Program. Professional Growth Series.

ERIC Educational Resources Information Center

Miller, Donna P.; Anderson, J'Lynn

This book provides teachers, media specialists, and administrators with a step-by-step method for integrating library resources and skills into the classroom curriculum. In this method, all curriculum areas are integrated into major units of study that are team-planned, team-produced, and team-taught. Topics include: components of the program and…

Termination of flat conductor cable to NASA/MSFC plugs

NASA Technical Reports Server (NTRS)

Angele, W.

1972-01-01

Data, supplemented with artwork, are presented on the major steps involved with terminating flat conductor cable (FCC) to MSFC's FCC plugs. Cable and shield preparation steps include material cutting, insulation stripping, and plating of exposed conductors. Methods and equipment required to terminate FCC to each of four MSFC plugs are described.

Castor diacylglycerol acyltransferase type1(DGAT1)displays greater activity with diricinolein than Arabidopsis DGAT1

USDA-ARS?s Scientific Manuscript database

Castor oil contains the hydroxy fatty acid ricinoleate as a major (90%) component. The diacylglycerol acyltransferase (DGAT) carries out the final reaction step in the biosynthesis of triacylglycerol, the principal constituent of seed oil, and has been considered to be the step that controls the oil...

Student Athletes: Shattering the Myths & Sharing the Realities.

ERIC Educational Resources Information Center

Kirk, Wyatt D., Ed.; Kirk, Sarah V., Ed.

This book covers the developmental benefits of athletics. It provides a step-by-step model for setting up a comprehensive high school program, a guide for college-bound athletes, seven case studies, and an outline of counselors' responsibilities. The book is divided into three major parts: the athletic environment and the athlete's participation…

How To Build a Strategic Plan: A Step-by-Step Guide for School Managers.

ERIC Educational Resources Information Center

Clay, Katherine; And Others

Strategic planning techniques for administrators, with a focus on process managers, are presented in this guidebook. The three major tasks of the strategic planning process include the assessment of the current organizational situation, goal setting, and the development of strategies to accomplish this. Strategic planning differs from long-range…

Evaluating Validity Evidence for USMLE Step 2 Clinical Skills Data Gathering and Data Interpretation Scores: Does Performance Predict History-Taking and Physical Examination Ratings for First-Year Internal Medicine Residents?

PubMed

Cuddy, Monica M; Winward, Marcia L; Johnston, Mary M; Lipner, Rebecca S; Clauser, Brian E

2016-01-01

To add to the small body of validity research addressing whether scores from performance assessments of clinical skills are related to performance in supervised patient settings, the authors examined relationships between United States Medical Licensing Examination (USMLE) Step 2 Clinical Skills (CS) data gathering and data interpretation scores and subsequent performance in history taking and physical examination in internal medicine residency training. The sample included 6,306 examinees from 238 internal medicine residency programs who completed Step 2 CS for the first time in 2005 and whose performance ratings from their first year of residency training were available. Hierarchical linear modeling techniques were used to examine the relationships among Step 2 CS data gathering and data interpretation scores and history-taking and physical examination ratings. Step 2 CS data interpretation scores were positively related to both history-taking and physical examination ratings. Step 2 CS data gathering scores were not related to either history-taking or physical examination ratings after other USMLE scores were taken into account. Step 2 CS data interpretation scores provide useful information for predicting subsequent performance in history taking and physical examination in supervised practice and thus provide validity evidence for their intended use as an indication of readiness to enter supervised practice. The results show that there is less evidence to support the usefulness of Step 2 CS data gathering scores. This study provides important information for practitioners interested in Step 2 CS specifically or in performance assessments of medical students' clinical skills more generally.

Parental qualities as perceived by borderline personality disorders.

PubMed

Goldberg, R L; Mann, L S; Wise, T N; Segall, E A

1985-01-01

This study explores the contribution of parental qualities to the borderline personality disorder. The Parental Bonding Inventory is used to compare four parental qualities (caring mother, caring father, overprotective father, and overprotective mother) across three groups (borderline personality disorders, assorted psychiatric controls and normal controls). The major finding was that the borderline patients perceived their parents to be significantly less caring and more overprotective than both the psychiatric control or nonclinical control groups. This study was verified previous reports that patients diagnosed with an affective illness (in either the borderline group or psychiatric control group) reported no significant differences on the inventory. Pinpointing parental characteristics which antecede mental disorders may be an important first step in devising primary preventive interventions for adult disorders.

Bimetallic catalysis for C–C and C–X coupling reactions

PubMed Central

Pye, Dominic R.

2017-01-01

Bimetallic catalysis represents an alternative paradigm for coupling chemistry that complements the more traditional single-site catalysis approach. In this perspective, recent advances in bimetallic systems for catalytic C–C and C–X coupling reactions are reviewed. Behavior which complements that of established single-site catalysts is highlighted. Two major reaction classes are covered. First, generation of catalytic amounts of organometallic species of e.g. Cu, Au, or Ni capable of transmetallation to a Pd co-catalyst (or other traditional cross-coupling catalyst) has allowed important new C–C coupling technologies to emerge. Second, catalytic transformations involving binuclear bond-breaking and/or bond-forming steps, in some cases involving metal–metal bonds, represent a frontier area for C–C and C–X coupling processes.

fMRI paradigm designing and post-processing tools

PubMed Central

James, Jija S; Rajesh, PG; Chandran, Anuvitha VS; Kesavadas, Chandrasekharan

2014-01-01

In this article, we first review some aspects of functional magnetic resonance imaging (fMRI) paradigm designing for major cognitive functions by using stimulus delivery systems like Cogent, E-Prime, Presentation, etc., along with their technical aspects. We also review the stimulus presentation possibilities (block, event-related) for visual or auditory paradigms and their advantage in both clinical and research setting. The second part mainly focus on various fMRI data post-processing tools such as Statistical Parametric Mapping (SPM) and Brain Voyager, and discuss the particulars of various preprocessing steps involved (realignment, co-registration, normalization, smoothing) in these software and also the statistical analysis principles of General Linear Modeling for final interpretation of a functional activation result. PMID:24851001

Applications of remote sensing to stream discharge predictions

NASA Technical Reports Server (NTRS)

Krause, F. R.; Winn, C. B.

1972-01-01

A feasibility study has been initiated on the use of remote earth observations for augmenting stream discharge prediction for the design and/or operation of major reservoir systems, pumping systems and irrigation systems. The near-term objectives are the interpolation of sparsely instrumented precipitation surveillance networks and the direct measurement of water loss by evaporation. The first steps of the study covered a survey of existing reservoir systems, stream discharge prediction methods, gage networks and the development of a self-adaptive variation of the Kentucky Watershed model, SNOPSET, that includes snowmelt. As a result of these studies, a special three channel scanner is being built for a small aircraft, which should provide snow, temperature and water vapor maps for the spatial and temporal interpolation of stream gages.

The International Space University

NASA Technical Reports Server (NTRS)

Davidian, Kenneth J.

1990-01-01

The International Space University (ISU) was founded on the premise that any major space program in the future would require international cooperation as a necessary first step toward its successful completion. ISU is devoted to being a leading center for educating future authorities in the world space industry. ISU's background, goals, current form, and future plans are described. The results and benefits of the type of education and experience gained from ISU include technical reports describing the design projects undertaken by the students, an exposure to the many different disciplines which are a part of a large space project, an awareness of the existing activities from around the world in the space community, and an international professional network which spans all aspects of space activities and covers the globe.

Evidence for the widespread distribution of CRISPR-Cas system in the Phylum Cyanobacteria

PubMed Central

Cai, Fei; Axen, Seth D.; Kerfeld, Cheryl A.

2013-01-01

Members of the phylum Cyanobacteria inhabit ecologically diverse environments. However, the CRISPR-Cas (clustered regularly interspaced short palindromic repeats, CRISPR associated genes), an extremely adaptable defense system, has not been surveyed in this phylum. We analyzed 126 cyanobacterial genomes and, surprisingly, found CRISPR-Cas in the majority except the marine subclade (Synechococcus and Prochlorococcus), in which cyanophages are a known force shaping their evolution. Multiple observations of CRISPR loci in the absence of cas1/cas2 genes may represent an early stage of losing a CRISPR-Cas locus. Our findings reveal the widespread distribution of their role in the phylum Cyanobacteria and provide a first step to systematically understanding CRISPR-Cas systems in cyanobacteria. PMID:23628889

Simulant Basis for the Standard High Solids Vessel Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, Reid A.; Fiskum, Sandra K.; Suffield, Sarah R.

The Waste Treatment and Immobilization Plant (WTP) is working to develop a Standard High Solids Vessel Design (SHSVD) process vessel. To support testing of this new design, WTP engineering staff requested that a Newtonian simulant and a non-Newtonian simulant be developed that would represent the Most Adverse Design Conditions (in development) with respect to mixing performance as specified by WTP. The majority of the simulant requirements are specified in 24590-PTF-RPT-PE-16-001, Rev. 0. The first step in this process is to develop the basis for these simulants. This document describes the basis for the properties of these two simulant types. Themore » simulant recipes that meet this basis will be provided in a subsequent document.« less

Data base manipulation for assessment of multiresource suitability and land change

NASA Technical Reports Server (NTRS)

Colwell, J.; Sanders, P.; Davis, G.; Thomson, F. (Principal Investigator)

1981-01-01

Progress is reported in three tasks which support the overall objectives of renewable resources inventory task of the AgRISTARS program. In the first task, the geometric correction algorithms of the Master Data Processor were investigated to determine the utility of data corrected by this processor for U.S. Forest Service uses. The second task involved investigation of logic to form blobs as a precursor step to automatic change detection involving two dates of LANDSAT data. Some routine procedures for selecting BLOB (spatial averaging) parameters were developed. In the third task, a major effort was made to develop land suitability modeling approches for timber, grazing, and wildlife habitat in support of resource planning efforts on the San Juan National Forest.

Coal gasification systems engineering and analysis. Appendix E: Cost estimation and economic evaluation methodology

NASA Technical Reports Server (NTRS)

1980-01-01

The cost estimation and economic evaluation methodologies presented are consistent with industry practice for assessing capital investment requirements and operating costs of coal conversion systems. All values stated are based on January, 1980 dollars with appropriate recognition of the time value of money. Evaluation of project economic feasibility can be considered a two step process (subject to considerable refinement). First, the costs of the project must be quantified and second, the price at which the product can be manufacturd must be determined. These two major categories are discussed. The summary of methodology is divided into five parts: (1) systems costs, (2)instant plant costs, (3) annual operating costs, (4) escalation and discounting process, and (5) product pricing.

Iris Positioning Using a Grid Attached to a Spring Bow for a Custom Ocular Prosthesis

PubMed Central

Aras, Meena Ajay; Chitre, Vidya; Costa, Godwin Clovis Da

2017-01-01

Eyes are among the first features of the face to be noticed. Loss of an eye due to congenital, traumatic or pathologic aetiologies causes disfigurement and loss of sensory feedback. It leaves a psychological impact on the patient, thus prosthesis should be provided at the earliest to raise the spirits of the afflicted. Iris positioning is one of the important steps in fabricating customized ocular prosthesis. In facial asymmetry cases, comparison of both irises together can be a major disadvantage. This case report illustrates the use of a unique customized frame spring bow assembly to position the iris disk using the established parallelism between inter pupillary line to the horizontal plane. PMID:28511522

Analysis of strong-interaction dynamic stall for laminar flow on airfoils

NASA Technical Reports Server (NTRS)

Gibeling, H. J.; Shamroth, S. J.; Eiseman, P. R.

1978-01-01

A compressible Navier-Stokes solution procedure is applied to the flow about an isolated airfoil. Two major problem areas were investigated. The first area is that of developing a coordinate system and an initial step in this direction has been taken. An airfoil coordinate system obtained from specification of discrete data points developed and the heat conduction equation has been solved in this system. Efforts required to allow the Navier-Stokes equations to be solved in this system are discussed. The second problem area is that of obtaining flow field solutions. Solutions for the flow about a circular cylinder and an isolated airfoil are presented. In the former case, the prediction is shown to be in good agreement with data.

Bioluminescence Monitoring of Neuronal Activity in Freely Moving Zebrafish Larvae

PubMed Central

Knafo, Steven; Prendergast, Andrew; Thouvenin, Olivier; Figueiredo, Sophie Nunes; Wyart, Claire

2017-01-01

The proof of concept for bioluminescence monitoring of neural activity in zebrafish with the genetically encoded calcium indicator GFP-aequorin has been previously described (Naumann et al., 2010) but challenges remain. First, bioluminescence signals originating from a single muscle fiber can constitute a major pitfall. Second, bioluminescence signals emanating from neurons only are very small. To improve signals while verifying specificity, we provide an optimized 4 steps protocol achieving: 1) selective expression of a zebrafish codon-optimized GFP-aequorin, 2) efficient soaking of larvae in GFP-aequorin substrate coelenterazine, 3) bioluminescence monitoring of neural activity from motor neurons in free-tailed moving animals performing acoustic escapes and 4) verification of the absence of muscle expression using immunohistochemistry. PMID:29130058

Optimisation of Critical Infrastructure Protection: The SiVe Project on Airport Security

NASA Astrophysics Data System (ADS)

Breiing, Marcus; Cole, Mara; D'Avanzo, John; Geiger, Gebhard; Goldner, Sascha; Kuhlmann, Andreas; Lorenz, Claudia; Papproth, Alf; Petzel, Erhard; Schwetje, Oliver

This paper outlines the scientific goals, ongoing work and first results of the SiVe research project on critical infrastructure security. The methodology is generic while pilot studies are chosen from airport security. The outline proceeds in three major steps, (1) building a threat scenario, (2) development of simulation models as scenario refinements, and (3) assessment of alternatives. Advanced techniques of systems analysis and simulation are employed to model relevant airport structures and processes as well as offences. Computer experiments are carried out to compare and optimise alternative solutions. The optimality analyses draw on approaches to quantitative risk assessment recently developed in the operational sciences. To exploit the advantages of the various techniques, an integrated simulation workbench is build up in the project.

StochKit2: software for discrete stochastic simulation of biochemical systems with events.

PubMed

Sanft, Kevin R; Wu, Sheng; Roh, Min; Fu, Jin; Lim, Rone Kwei; Petzold, Linda R

2011-09-01

StochKit2 is the first major upgrade of the popular StochKit stochastic simulation software package. StochKit2 provides highly efficient implementations of several variants of Gillespie's stochastic simulation algorithm (SSA), and tau-leaping with automatic step size selection. StochKit2 features include automatic selection of the optimal SSA method based on model properties, event handling, and automatic parallelism on multicore architectures. The underlying structure of the code has been completely updated to provide a flexible framework for extending its functionality. StochKit2 runs on Linux/Unix, Mac OS X and Windows. It is freely available under GPL version 3 and can be downloaded from http://sourceforge.net/projects/stochkit/. petzold@engineering.ucsb.edu.

A stochastical event-based continuous time step rainfall generator based on Poisson rectangular pulse and microcanonical random cascade models

NASA Astrophysics Data System (ADS)

Pohle, Ina; Niebisch, Michael; Zha, Tingting; Schümberg, Sabine; Müller, Hannes; Maurer, Thomas; Hinz, Christoph

2017-04-01

Rainfall variability within a storm is of major importance for fast hydrological processes, e.g. surface runoff, erosion and solute dissipation from surface soils. To investigate and simulate the impacts of within-storm variabilities on these processes, long time series of rainfall with high resolution are required. Yet, observed precipitation records of hourly or higher resolution are in most cases available only for a small number of stations and only for a few years. To obtain long time series of alternating rainfall events and interstorm periods while conserving the statistics of observed rainfall events, the Poisson model can be used. Multiplicative microcanonical random cascades have been widely applied to disaggregate rainfall time series from coarse to fine temporal resolution. We present a new coupling approach of the Poisson rectangular pulse model and the multiplicative microcanonical random cascade model that preserves the characteristics of rainfall events as well as inter-storm periods. In the first step, a Poisson rectangular pulse model is applied to generate discrete rainfall events (duration and mean intensity) and inter-storm periods (duration). The rainfall events are subsequently disaggregated to high-resolution time series (user-specified, e.g. 10 min resolution) by a multiplicative microcanonical random cascade model. One of the challenges of coupling these models is to parameterize the cascade model for the event durations generated by the Poisson model. In fact, the cascade model is best suited to downscale rainfall data with constant time step such as daily precipitation data. Without starting from a fixed time step duration (e.g. daily), the disaggregation of events requires some modifications of the multiplicative microcanonical random cascade model proposed by Olsson (1998): Firstly, the parameterization of the cascade model for events of different durations requires continuous functions for the probabilities of the multiplicative weights, which we implemented through sigmoid functions. Secondly, the branching of the first and last box is constrained to preserve the rainfall event durations generated by the Poisson rectangular pulse model. The event-based continuous time step rainfall generator has been developed and tested using 10 min and hourly rainfall data of four stations in North-Eastern Germany. The model performs well in comparison to observed rainfall in terms of event durations and mean event intensities as well as wet spell and dry spell durations. It is currently being tested using data from other stations across Germany and in different climate zones. Furthermore, the rainfall event generator is being applied in modelling approaches aimed at understanding the impact of rainfall variability on hydrological processes. Reference Olsson, J.: Evaluation of a scaling cascade model for temporal rainfall disaggregation, Hydrology and Earth System Sciences, 2, 19.30

A long-term change of the AR/KR/XE fractionation in the solar corpuscular radiation

NASA Technical Reports Server (NTRS)

Wieler, R.; Baur, H.; Signer, P.

1993-01-01

Solar noble gases in an ilmenite separate from breccia 79035 (antiquity greater than 1 Ga) were analyzed by closed system stepped etching (CSSE). All five gases show the familiar two-component structure: first solar-wind (SW) gases are released, followed by gases from solar energetic particles (SEP). Element patterns in 79035 are similar to those of 71501 ilmenite. SW-He-Ne were partly lost, but SEP-He-Ne-Ar are retained (nearly) unfractionated. Constant Ar/Kr/Xe ratios indicate that ilmenites contain an unfractionated sample of the heavy SW-SEP noble gases. Ar/Kr/Xe ratios in the solar corpuscular radiation are, however, different from 'solar system' values, whereby the Kr/Xe difference in 79035 is about twice as large as in 71501. We propose that Xe is less fractionated than Kr and Ar, though its first ionization potential (FIP) is higher than the 'cutoff' at approximately 11.5 eV, above which all elements in SEP are usually assumed to be depleted by a roughly constant factor. SW-Ne may be isotopically slightly heavier in the ancient SW trapped by 79035, as proposed earlier. In this work we extend our previous CSSE studies of solar noble gases including Kr and Xe to a lunar sample irradiated at least 1 Ga ago (breccia 79035, ilmenite separate, 42-64 microns). This sample was particularly gently etched in the first steps. Surprisingly, the first three steps, each releasing less than or equal to 0.5% of the total 36-Ar, showed an SEP-like trapped component plus relatively large concentrations of cosmogenic gases. Steps 4ff contain much less cosmogenic and more solar gas with a SW-like isotope pattern. Thus, a very minor easily etchable phase that has completely lost its SW-gases must be responsible for steps 1-3. We will not discuss these steps here and refer to the actual step 4 as the 'initial' etching step.

Initial experience with the world's first digital drainage system. The benefits of recording air leaks with graphic representation.

PubMed

Dernevik, Leif; Belboul, Ali; Rådberg, Göran

2007-02-01

To evaluate the clinical efficacy of a new digital drainage system, the DigiVent Chest Drainage System that gives accurate measurements of air leakage and pleural pressures and can display those measurements over time. The DigiVent Chest Drainage System was tested in three steps: Step 1; first clinical use in five patients, Step 2; management and acceptance in further 15 patients and Step 3; reliability in routine use in 50 patients. The results from Steps 1 and 2 showed that the system was good enough for extended use. The results from Step 3 showed excellent clinical performance, however, we experienced device malfunctions in four cases without any consequences for the patients. The cause of the malfunctions was identified and steps taken to prevent their further occurrence. The ability of the DigiVent to measure airflow and present mean values for 1, 3 and 6h proved to be very practical. The ability to save data and present curves for the entire course of treatment will be an advantage for research in the field of lung surgery.

Two-step Raman spectroscopy method for tumor diagnosis

NASA Astrophysics Data System (ADS)

Zakharov, V. P.; Bratchenko, I. A.; Kozlov, S. V.; Moryatov, A. A.; Myakinin, O. O.; Artemyev, D. N.

2014-05-01

Two-step Raman spectroscopy phase method was proposed for differential diagnosis of malignant tumor in skin and lung tissue. It includes detection of malignant tumor in healthy tissue on first step with identification of concrete cancer type on the second step. Proposed phase method analyze spectral intensity alteration in 1300-1340 and 1640-1680 cm-1 Raman bands in relation to the intensity of the 1450 cm-1 band on first step, and relative differences between RS intensities for tumor area and healthy skin closely adjacent to the lesion on the second step. It was tested more than 40 ex vivo samples of lung tissue and more than 50 in vivo skin tumors. Linear Discriminant Analysis, Quadratic Discriminant Analysis and Support Vector Machine were used for tumors type classification on phase planes. It is shown that two-step phase method allows to reach 88.9% sensitivity and 87.8% specificity for malignant melanoma diagnosis (skin cancer); 100% sensitivity and 81.5% specificity for adenocarcinoma diagnosis (lung cancer); 90.9% sensitivity and 77.8% specificity for squamous cell carcinoma diagnosis (lung cancer).

The 5-Step Method: Principles and Practice

ERIC Educational Resources Information Center

Copello, Alex; Templeton, Lorna; Orford, Jim; Velleman, Richard

2010-01-01

This article includes a description of the 5-Step Method. First, the origins and theoretical basis of the method are briefly described. This is followed by a discussion of the general principles that guide the delivery of the method. Each step is then described in more detail, including the content and focus of each of the five steps that include:…

Primary palliative Care in General Practice - study protocol of a three-stage mixed-methods organizational health services research study.

PubMed

Ewertowski, Helen; Tetzlaff, Fabian; Stiel, Stephanie; Schneider, Nils; Jünger, Saskia

2018-01-30

The focus of this project is on improving the provision of primary palliative care (PC) by general practitioners (GPs). While approximately 10-15% of the incurable, seriously ill or dying people will be in need of specialist PC, the vast majority can be adequately treated within generalist care. The strengthening of the GP's role in PC, as well as ensuring close collaboration between specialist PC services and GPs have been identified as top priorities for the improvement of PC in Germany. Despite healthcare policy actions, diverse obstacles still exist to successful implementation of primary PC on a structural, process, and economic level. Therefore, this project aims at addressing barriers and facilitators to primary PC delivery in general practice in Germany. The study follows a three-step approach; first, it aims at systematically analyzing barriers and facilitators to primary PC provision by GPs. Second, based on these outcomes, a tailored intervention package will be developed to enhance the provision of primary PC by GPs. Third, the intervention package will be implemented and evaluated in practice. The expected outcome will be an evidence-based model for successful implementation of primary PC delivery tailored to the German healthcare system, followed by a strategic action plan on how to improve current practice both on a local level and nationally. The first step of the project has been partly completed at the time of writing. The chosen methodologies of four sub-projects within this first step have opened up different advantages and disadvantages for the data collection. In sum of all sub-projects, the different methodologies and target groups contributed valuable information to the systematic analysis of barriers and facilitators to primary PC provision by GPs. The study (BMBF-FK 01 GY 1610) was retrospectively registered at the German Clinical Trials Register (Deutsches Register Klinischer Studien) (Registration N° DRKS00011821 ; date of registration: December 04th 2017) and at the German Register of health care research (Versorgungsforschung Deutschland - Datenbank) (Registration N° VfD_ALLPRAX_16_003817 ; date of registration: March 30th 2017).

Soliton radiation beat analysis of optical pulses generated from two continuous-wave lasers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zajnulina, M.; Giannone, D.; Haynes, R.

We propose a fibre-based approach for generation of optical frequency combs (OFCs) with the aim of calibration of astronomical spectrographs in the low and medium-resolution range. This approach includes two steps: in the first step, an appropriate state of optical pulses is generated and subsequently moulded in the second step delivering the desired OFC. More precisely, the first step is realised by injection of two continuous-wave (CW) lasers into a conventional single-mode fibre, whereas the second step generates a broad OFC by using the optical solitons generated in step one as initial condition. We investigate the conversion of a bichromaticmore » input wave produced by two initial CW lasers into a train of optical solitons, which happens in the fibre used as step one. Especially, we are interested in the soliton content of the pulses created in this fibre. For that, we study different initial conditions (a single cosine-hump, an Akhmediev breather, and a deeply modulated bichromatic wave) by means of soliton radiation beat analysis and compare the results to draw conclusion about the soliton content of the state generated in the first step. In case of a deeply modulated bichromatic wave, we observed the formation of a collective soliton crystal for low input powers and the appearance of separated solitons for high input powers. An intermediate state showing the features of both, the soliton crystal and the separated solitons, turned out to be most suitable for the generation of OFC for the purpose of calibration of astronomical spectrographs.« less