A review of design issues specific to hypersonic flight vehicles

NASA Astrophysics Data System (ADS)

Sziroczak, D.; Smith, H.

2016-07-01

This paper provides an overview of the current technical issues and challenges associated with the design of hypersonic vehicles. Two distinct classes of vehicles are reviewed; Hypersonic Transports and Space Launchers, their common features and differences are examined. After a brief historical overview, the paper takes a multi-disciplinary approach to these vehicles, discusses various design aspects, and technical challenges. Operational issues are explored, including mission profiles, current and predicted markets, in addition to environmental effects and human factors. Technological issues are also reviewed, focusing on the three major challenge areas associated with these vehicles: aerothermodynamics, propulsion, and structures. In addition, matters of reliability and maintainability are also presented. The paper also reviews the certification and flight testing of these vehicles from a global perspective. Finally the current stakeholders in the field of hypersonic flight are presented, summarizing the active programs and promising concepts.

MODELING ACUTE EXPOSURE TO SOLAR RADIATION

EPA Science Inventory

One of the major technical challenges in calculating solar flux on the human form has been the complexity of the surface geometry (i.e., the surface normal vis a vis the incident radiation). The American Cancer Society reports that over 80% of skin cancers occur on the face, he...

A Concept of Operations for an Integrated Vehicle Health Assurance System

NASA Technical Reports Server (NTRS)

Hunter, Gary W.; Ross, Richard W.; Berger, David E.; Lekki, John D.; Mah, Robert W.; Perey, Danie F.; Schuet, Stefan R.; Simon, Donald L.; Smith, Stephen W.

2013-01-01

This document describes a Concept of Operations (ConOps) for an Integrated Vehicle Health Assurance System (IVHAS). This ConOps is associated with the Maintain Vehicle Safety (MVS) between Major Inspections Technical Challenge in the Vehicle Systems Safety Technologies (VSST) Project within NASA s Aviation Safety Program. In particular, this document seeks to describe an integrated system concept for vehicle health assurance that integrates ground-based inspection and repair information with in-flight measurement data for airframe, propulsion, and avionics subsystems. The MVS Technical Challenge intends to maintain vehicle safety between major inspections by developing and demonstrating new integrated health management and failure prevention technologies to assure the integrity of vehicle systems between major inspection intervals and maintain vehicle state awareness during flight. The approach provided by this ConOps is intended to help optimize technology selection and development, as well as allow the initial integration and demonstration of these subsystem technologies over the 5 year span of the VSST program, and serve as a guideline for developing IVHAS technologies under the Aviation Safety Program within the next 5 to 15 years. A long-term vision of IVHAS is provided to describe a basic roadmap for more intelligent and autonomous vehicle systems.

Dual effectiveness of ascorbic acid and ethanol combined treatment to inhibit browning and inactivate pathogens on fresh-cut apples

USDA-ARS?s Scientific Manuscript database

Commercially-produced apple wedges have recently been associated with several recalls due to foodborne pathogen contamination. The fresh-cut industry faces a major technical challenge due to the incompatibility between chemicals used to control spoilage and pathogenic microorganisms (usually oxidize...

“FROM THE SOURCE – TAP WATER AS A SUSTAINABLE ALTERNATIVE”

EPA Science Inventory

The major technical challenge to sustainability is reduction of use of plastic bottled water and bottled water in general. This will be done by a student administered water assessment survey on campus, coupled with a public education campaign on the benefits of using tap water...

MODELING THE ANATOMICAL DISTRIBUTION OF SUNLIGHT

EPA Science Inventory

One of the major technical challenges in calculating solar irradiance on the human form has been the complexity of the surface geometry (i.e. the surface normal vis a vis the incident radiation. Over 80 percent of skin cancers occur on the face, head, and back of the hands. The...

Novel technical solutions for wireless ECG transmission & analysis in the age of the internet cloud.

PubMed

Al-Zaiti, Salah S; Shusterman, Vladimir; Carey, Mary G

2013-01-01

Current guidelines recommend early reperfusion therapy for ST-elevation myocardial infarction (STEMI) within 90 min of first medical encounter. Telecardiology entails the use of advanced communication technologies to transmit the prehospital 12-lead electrocardiogram (ECG) to offsite cardiologists for early triage to the cath lab; which has been shown to dramatically reduce door-to-balloon time and total mortality. However, hospitals often find adopting ECG transmission technologies very challenging. The current review identifies seven major technical challenges of prehospital ECG transmission, including: paramedics inconvenience and transport delay; signal noise and interpretation errors; equipment malfunction and transmission failure; reliability of mobile phone networks; lack of compliance with the standards of digital ECG formats; poor integration with electronic medical records; and costly hardware and software pre-requisite installation. Current and potential solutions to address each of these technical challenges are discussed in details and include: automated ECG transmission protocols; annotatable waveform-based ECGs; optimal routing solutions; and the use of cloud computing systems rather than vendor-specific processing stations. Nevertheless, strategies to monitor transmission effectiveness and patient outcomes are essential to sustain initial gains of implementing ECG transmission technologies. © 2013.

Pluripotent Stem Cells for Retinal Tissue Engineering: Current Status and Future Prospects.

PubMed

Singh, Ratnesh; Cuzzani, Oscar; Binette, François; Sternberg, Hal; West, Michael D; Nasonkin, Igor O

2018-04-19

The retina is a very fine and layered neural tissue, which vitally depends on the preservation of cells, structure, connectivity and vasculature to maintain vision. There is an urgent need to find technical and biological solutions to major challenges associated with functional replacement of retinal cells. The major unmet challenges include generating sufficient numbers of specific cell types, achieving functional integration of transplanted cells, especially photoreceptors, and surgical delivery of retinal cells or tissue without triggering immune responses, inflammation and/or remodeling. The advances of regenerative medicine enabled generation of three-dimensional tissues (organoids), partially recreating the anatomical structure, biological complexity and physiology of several tissues, which are important targets for stem cell replacement therapies. Derivation of retinal tissue in a dish creates new opportunities for cell replacement therapies of blindness and addresses the need to preserve retinal architecture to restore vision. Retinal cell therapies aimed at preserving and improving vision have achieved many improvements in the past ten years. Retinal organoid technologies provide a number of solutions to technical and biological challenges associated with functional replacement of retinal cells to achieve long-term vision restoration. Our review summarizes the progress in cell therapies of retina, with focus on human pluripotent stem cell-derived retinal tissue, and critically evaluates the potential of retinal organoid approaches to solve a major unmet clinical need-retinal repair and vision restoration in conditions caused by retinal degeneration and traumatic ocular injuries. We also analyze obstacles in commercialization of retinal organoid technology for clinical application.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kippen, Karen Elizabeth

This is Los Alamos National Laboratory's (LANL) June 2016 newsletter of the Materials Science and Technology Division. The following are major topics in this newsletter: MST-8 scientists guide national efforts to overcome nuclear energy technical challenges, first-ever scanning probe microscopy capabilities for plutonium, laboratory metallurgists make thorium targets for production of cancer-fighting isotopes, and a spotlight on Veronica Livescu.

Coordinated pre-preemption of traffic signals to enhance railroad grade crossing safety in urban areas and estimation of train impacts to arterial travel time delay : [technical summary].

DOT National Transportation Integrated Search

2014-01-01

Rail lines present two major challenges to the : roadways they intersect: potential for collisions : and increased congestion. In addition, congestion : can contribute collision hazards when drivers are : impatient or vehicles are prevented from clea...

Support from Afar: Using Chemical Safety Information on the Internet.

ERIC Educational Resources Information Center

Stuart, Ralph

One of the major challenges facing people committed to Teaching Safety in High Schools, Colleges, and Universities is keeping up with both the wide range of relevant technical information about potential hazards (ranging from fire protection to chemical hazards to biological issues) and the ever-changing world of safety regulations and standards.…

Prospects and Challenges for Using Microcomputers in School. Technical Report No. 7.

ERIC Educational Resources Information Center

Pea, Roy D.

Prepared as an address for educator groups, this paper provides a theoretical perspective for thinking about problems and prospects for integrating microcomputer uses in school activities. Six major aspects of the perspective are defined: (1) the computer as general-purpose symbolic device; (2) the importance of developmental studies of children's…

Endoscopic and keyhole endoscope-assisted neurosurgical approaches: a qualitative survey on technical challenges and technological solutions.

PubMed

Marcus, Hani J; Cundy, Thomas P; Hughes-Hallett, Archie; Yang, Guang-Zhong; Darzi, Ara; Nandi, Dipankar

2014-10-01

The literature reflects a resurgence of interest in endoscopic and keyhole endoscope-assisted neurosurgical approaches as alternatives to conventional microsurgical approaches in carefully selected cases. The aim of this study was to assess the technical challenges of neuroendoscopy, and the scope for technological innovations to overcome these barriers. All full members of the Society of British Neurosurgeons (SBNS) were electronically invited to participate in an online survey. The open-ended structured survey asked three questions; firstly, whether the surgeon presently utilises or has experience with endoscopic or endoscope-assisted approaches; secondly, what they consider to be the major technical barriers to adopting such approaches; and thirdly, what technological advances they foresee improving safety and efficacy in the field. Responses were subjected to a qualitative research method of multi-rater emergent theme analysis. Three clear themes emerged: 1) surgical approach and better integration with image-guidance systems (20%), 2) intra-operative visualisation and improvements in neuroendoscopy (49%), and 3) surgical manipulation and improvements in instruments (74%). The analysis of responses to our open-ended survey revealed that although opinion was varied three major themes could be identified. Emerging technological advances such as augmented reality, high-definition stereo-endoscopy, and robotic joint-wristed instruments may help overcome the technical difficulties associated with neuroendoscopic approaches. Results of this qualitative survey provide consensus amongst the technology end-user community such that unambiguous goals and priorities may be defined. Systems integrating these advances could improve the safety and efficacy of endoscopic and endoscope-assisted neurosurgical approaches.

Endoscopic and Keyhole Endoscope-assisted Neurosurgical Approaches: A Qualitative Survey on Technical Challenges and Technological Solutions

PubMed Central

Marcus, Hani J; Cundy, Thomas P; Hughes-Hallett, Archie; Yang, Guang-Zhong; Darzi, Ara; Nandi, Dipankar

2014-01-01

Introduction The literature reflects a resurgence of interest in endoscopic and keyhole endoscope-assisted neurosurgical approaches as alternatives to conventional microsurgical approaches in carefully selected cases. The aim of this study was to assess the technical challenges of neuroendoscopy, and the scope for technological innovations to overcome these barriers. Materials and Methods All full members of the Society of British Neurosurgeons (SBNS) were electronically invited to participate in an online survey. The open-ended structured survey asked three questions; firstly, whether the surgeon presently utilises or has experience with endoscopic or endoscope-assisted approaches; secondly, what they consider to be the major technical barriers to adopting such approaches; and thirdly, what technological advances they foresee improving safety and efficacy in the field. Responses were subjected to a qualitative research method of multi-rater emergent themes analysis. Results Three clear themes emerged: 1) surgical approach and better integration with image-guidance systems (20%), 2) intra-operative visualisation and improvements in neuroendoscopy (49%), and 3) surgical manipulation and improvements in instruments (74%). Discussion The analysis of responses to our open-ended survey revealed that although opinion was varied three major themes could be identified. Emerging technological advances such as augmented reality, high-definition stereo-endoscopy, and robotic joint-wristed instruments may help overcome the technical difficulties associated with neuroendoscopic approaches. Conclusions Results of this qualitative survey provide consensus amongst the technology end-user community such that unambiguous goals and priorities may be defined. Systems integrating these advances could improve the safety and efficacy of endoscopic and endoscope-assisted neurosurgical approaches. PMID:24533591

Technical Assessment: Integrated Photonics

DTIC Science & Technology

2015-10-01

in global internet protocol traffic as a function of time by local access technology. Photonics continues to play a critical role in enabling this...communication networks. This has enabled services like the internet , high performance computing, and power-efficient large-scale data centers. The...signal processing, quantum information science, and optics for free space applications. However major obstacles challenge the implementation of

Development and preliminary evaluation of a new bin filler for apple harvesting and and infield sorting

USDA-ARS?s Scientific Manuscript database

The bin filler, which is used for filling the fruit container or bin with apples coming from the sorting system, plays a critical role for the self-propelled apple harvest and infield sorting (HIS) machine that is being developed in our laboratory. Two major technical challenges in developing the bi...

Development of a new bin filler for apple harvesting and infield sorting with a review of existing technologies

USDA-ARS?s Scientific Manuscript database

The bin filler, which receives apples from the sorting system and then places them in the bin evenly without causing bruise damage, plays a critical role for the self-propelled apple harvest and infield sorting (HIS) machine that is being developed in our laboratory. Two major technical challenges ...

What have we learned, and what is new in watershed science?

Treesearch

Robert R. Ziemer; Leslie M. Reid

1997-01-01

Abstract - Important new lessons are not in technical details, but in how to scale up the details to apply to large watersheds and landscapes. Nearly three years of experience with the Northwest Forest Plan have revealed some major new challenges in the fields of watershed science. In particular, managers and resource specialists engaged in watershed analysis...

Acoustic Shotgun System

DTIC Science & Technology

2009-09-16

dispersing a plurality of relatively small, supercavitating projectiles in the water over a wide spatial field at long ranges from an underwater gun...or surface gun. (2) Description of the Prior Art [0004] One major technical challenge related to employing supercavitating projectiles against...accordingly is more limited. [0005] A second problem common to supercavitating projectiles is the configuration of the projectile itself. The primary

The Economic Crisis and Other Challenges in Accessing Science and Technological Information in Asia.

ERIC Educational Resources Information Center

Stueart, Robert D.

This paper discusses access to scientific and technical information in Asia. The first section considers the economic crisis, including the growth in information service as a major indicator of the success or failure of the economies of developing countries. Libraries' response to the economic crisis is addressed in the second section, including…

Connectivity inference from neural recording data: Challenges, mathematical bases and research directions.

PubMed

Magrans de Abril, Ildefons; Yoshimoto, Junichiro; Doya, Kenji

2018-06-01

This article presents a review of computational methods for connectivity inference from neural activity data derived from multi-electrode recordings or fluorescence imaging. We first identify biophysical and technical challenges in connectivity inference along the data processing pipeline. We then review connectivity inference methods based on two major mathematical foundations, namely, descriptive model-free approaches and generative model-based approaches. We investigate representative studies in both categories and clarify which challenges have been addressed by which method. We further identify critical open issues and possible research directions. Copyright © 2018 The Author(s). Published by Elsevier Ltd.. All rights reserved.

FacetGist: Collective Extraction of Document Facets in Large Technical Corpora.

PubMed

Siddiqui, Tarique; Ren, Xiang; Parameswaran, Aditya; Han, Jiawei

2016-10-01

Given the large volume of technical documents available, it is crucial to automatically organize and categorize these documents to be able to understand and extract value from them. Towards this end, we introduce a new research problem called Facet Extraction. Given a collection of technical documents, the goal of Facet Extraction is to automatically label each document with a set of concepts for the key facets ( e.g. , application, technique, evaluation metrics, and dataset) that people may be interested in. Facet Extraction has numerous applications, including document summarization, literature search, patent search and business intelligence. The major challenge in performing Facet Extraction arises from multiple sources: concept extraction, concept to facet matching, and facet disambiguation. To tackle these challenges, we develop FacetGist, a framework for facet extraction. Facet Extraction involves constructing a graph-based heterogeneous network to capture information available across multiple local sentence-level features, as well as global context features. We then formulate a joint optimization problem, and propose an efficient algorithm for graph-based label propagation to estimate the facet of each concept mention. Experimental results on technical corpora from two domains demonstrate that Facet Extraction can lead to an improvement of over 25% in both precision and recall over competing schemes.

FacetGist: Collective Extraction of Document Facets in Large Technical Corpora

PubMed Central

Siddiqui, Tarique; Ren, Xiang; Parameswaran, Aditya; Han, Jiawei

2017-01-01

Given the large volume of technical documents available, it is crucial to automatically organize and categorize these documents to be able to understand and extract value from them. Towards this end, we introduce a new research problem called Facet Extraction. Given a collection of technical documents, the goal of Facet Extraction is to automatically label each document with a set of concepts for the key facets (e.g., application, technique, evaluation metrics, and dataset) that people may be interested in. Facet Extraction has numerous applications, including document summarization, literature search, patent search and business intelligence. The major challenge in performing Facet Extraction arises from multiple sources: concept extraction, concept to facet matching, and facet disambiguation. To tackle these challenges, we develop FacetGist, a framework for facet extraction. Facet Extraction involves constructing a graph-based heterogeneous network to capture information available across multiple local sentence-level features, as well as global context features. We then formulate a joint optimization problem, and propose an efficient algorithm for graph-based label propagation to estimate the facet of each concept mention. Experimental results on technical corpora from two domains demonstrate that Facet Extraction can lead to an improvement of over 25% in both precision and recall over competing schemes. PMID:28210517

Status of the Regenerative ECLS Water Recovery System

NASA Technical Reports Server (NTRS)

Carter, Donald Layne

2010-01-01

The regenerative Water Recovery System (WRS) has completed its first full year of operation on the International Space Station (ISS). The major assemblies included in this system are the Water Processor Assembly (WPA) and Urine Processor Assembly (UPA). This paper summarizes the on-orbit status as of May 2010, and describes the technical challenges encountered and lessons learned over the past year.

Integration of the Common Core State Standards into CTE: Challenges and Strategies of Career and Technical Teachers

ERIC Educational Resources Information Center

Asunda, Paul A.; Finnell, Alicia M.; Berry, Nicholas R.

2015-01-01

In recent years, conversations about the importance of education standards in our school systems have intensified. Common Core State Standards (CCSS) are being implemented across most of the country. The standards require a major shift in instruction and the needed supports really are not there. This study investigated the common barriers,…

Technical paper contest for women 1992. Space challenges: Earth and beyond

NASA Technical Reports Server (NTRS)

Orans, Robin (Editor)

1993-01-01

Two of the major concerns of the NASA Ames Research Center (NASA ARC) Advisory Committee for Women (ACW) are that recruitment of women scientists, engineers, and technicians needs to increase and that barriers to advancement need to be removed for improved representation of women in middle and upper management and scientific positions. One strategy that addressed this concern was the ACW sponsorship of a Technical Paper Contest for Women at Ames Research Center. Other sponsors of the Contest were the Ames Equal Opportunity Council and the Ames Contractor Council. The Technical Paper Contest for Women greatly increased the visibility of both the civil service women and the women who work for contractors at Ames. The women had the opportunity to hone their written and oral presentation skills. Networking among Ames women increased.

Photodynamic therapy for treatment of solid tumors – potential and technical challenges

PubMed Central

Huang, Zheng; Xu, Heping; Meyers, Arlen D.; Musani, Ali I.; Wang, Luowei; Tagg, Randall; Barqawi, Al B.; Chen, Yang K.

2008-01-01

Photodynamic therapy (PDT) involves the administration of photosensitizer followed by local illumination with visible light of specific wavelength(s). In the presence of oxygen molecules, the light illumination of photosensitizer can lead to a series of photochemical reactions and consequently the generation of cytotoxic species. The quantity and location of PDT-induced cytotoxic species determine the nature and consequence of PDT. Much progress has been seen in both basic research and clinical application in recent years. Although the majority of approved PDT clinical protocols have primarily been used for the treatment of superficial lesions of both malignant and non-malignant diseases, interstitial PDT for the ablation of deep-seated solid tumors are now being investigated worldwide. The complexity of the geometry and non-homogeneity of solid tumor pose a great challenge on the implementation of minimally invasive interstitial PDT and the estimation of PDT dosimetry. This review will discuss the recent progress and technical challenges of various forms of interstitial PDT for the treatment of parenchymal and/or stromal tissues of solid tumors. PMID:18642969

[Health situation and issues in the Seychelles in 2012].

PubMed

Bovet, P; Gédéon, J; Louange, M; Durasnel, P; Aubry, P; Gaüzère, B-A

2013-01-01

Off the coast of Kenya, the Seychelles, home to 87,400 inhabitants mostly of African origin, have largely completed their demographic and epidemiologic transitions. Major investments in infrastructure and social services have fostered steady economic growth. Health care and education are free. The predominance of chronic non-communicable diseases and rapid aging of the population nonetheless present significant challenges for public health and the health system. Like the other small island states in the region, the Seychelles continue to be threatened by arbovirus outbreaks. Health indicators are good, but the geographic isolation, the small and aging population, and limited resources make a major challenge maintaining and sustaining an effective workforce of health professionals, a constantly evolving technical platform, and increasing amount of medications particularly in view of the increasing burden of chronic diseases.

In the public interest: assessing expert and stakeholder influence in public deliberation about biobanks.

PubMed

MacLean, Samantha; Burgess, Michael M

2010-07-01

Providing technical and experiential information without overwhelming participants' perspectives presents a major challenge to public involvement in policy decisions. This article reports the design and analysis of a case study on incorporating expert and stakeholder knowledge without including them as deliberators, while supporting deliberative participants' ability to introduce and critically assess different perspectives. Analysis of audio-recorded deliberations illustrates how expert and stakeholder knowledge was cited, criticized and incorporated into deliberations. In conclusion, separating experts and stakeholders from deliberations may be an important prima facie principle when the goal is to enhance citizen representation on technical issues and related policy.

A review of Integrated Vehicle Health Management tools for legacy platforms: Challenges and opportunities

NASA Astrophysics Data System (ADS)

Esperon-Miguez, Manuel; John, Philip; Jennions, Ian K.

2013-01-01

Integrated Vehicle Health Management (IVHM) comprises a set of tools, technologies and techniques for automated detection, diagnosis and prognosis of faults in order to support platforms more efficiently. Specific challenges are faced when IVHM tools are to be retrofitted into legacy vehicles since major modifications are much more challenging than with platforms whose design can still be modified. The topics covered in this Review Paper include the state of the art of IVHM tools and how their characteristics match the requirements of legacy aircraft, a summary of problems faced in the past trying to retrofit IVHM tools both from a technical and organisational perspective and the current level of implementation of IVHM in industry. Although the technology has not reached the level necessary to implement IVHM to its full potential on every kind of component, significant progress has been achieved on rotating equipment, structures or electronics. Attempts to retrofit some of these tools in the past faced both technical difficulties and opposition by some stakeholders, the later being responsible for the failure of technically sound projects in more than one occasion. Nevertheless, despite these difficulties, products and services based on IVHM technology have started to be offered by the manufacturers and, what is more important, demanded by the operators, providing guidance on what the industry would demand from IVHM on legacy aircraft.

Data issues in the life sciences.

PubMed

Thessen, Anne E; Patterson, David J

2011-01-01

We review technical and sociological issues facing the Life Sciences as they transform into more data-centric disciplines - the "Big New Biology". Three major challenges are: 1) lack of comprehensive standards; 2) lack of incentives for individual scientists to share data; 3) lack of appropriate infrastructure and support. Technological advances with standards, bandwidth, distributed computing, exemplar successes, and a strong presence in the emerging world of Linked Open Data are sufficient to conclude that technical issues will be overcome in the foreseeable future. While motivated to have a shared open infrastructure and data pool, and pressured by funding agencies in move in this direction, the sociological issues determine progress. Major sociological issues include our lack of understanding of the heterogeneous data cultures within Life Sciences, and the impediments to progress include a lack of incentives to build appropriate infrastructures into projects and institutions or to encourage scientists to make data openly available.

Data issues in the life sciences

PubMed Central

Thessen, Anne E.; Patterson, David J.

2011-01-01

Abstract We review technical and sociological issues facing the Life Sciences as they transform into more data-centric disciplines - the “Big New Biology”. Three major challenges are: 1) lack of comprehensive standards; 2) lack of incentives for individual scientists to share data; 3) lack of appropriate infrastructure and support. Technological advances with standards, bandwidth, distributed computing, exemplar successes, and a strong presence in the emerging world of Linked Open Data are sufficient to conclude that technical issues will be overcome in the foreseeable future. While motivated to have a shared open infrastructure and data pool, and pressured by funding agencies in move in this direction, the sociological issues determine progress. Major sociological issues include our lack of understanding of the heterogeneous data cultures within Life Sciences, and the impediments to progress include a lack of incentives to build appropriate infrastructures into projects and institutions or to encourage scientists to make data openly available. PMID:22207805

The Role of Urban Primary and Secondary Schools in Minimizing Disease Outbreak Caused by Environmental Contamination: A Case of Chinhoyi, Zimbabwe

ERIC Educational Resources Information Center

Mutungwe, Edlight; Tsvere, Maria; Dondo, Beauty; Munikwa, Simbarashe

2011-01-01

Waste management is a major challenge facing urban councils in Zimbabwe and Chinhoyi Municipality is no exception. Lack of resources and technical and administrative know-how is hindering proper waste management. Raw sewage and industrial waste flow into streams and rivers and uncollected rubbish bins and strewn litter is a common feature in the…

Food systems transition and disruptive low carbon innovation: implications for a food security research agenda.

PubMed

Tyfield, David

2011-07-01

There is a growing consensus that we are facing epochal challenges in global food security. Moreover, these challenges are multiple and complex. Meeting these challenges will involve nothing less than a wholesale socio-technical transition of the agri-food system. Optimizing the efficacy of the contribution of research to such a food security agenda will probably also need new institutional mechanisms and career structures to facilitate new kinds of collaborations and ongoing, longer-term projects. In short, the multiple challenges of food security demand a different political economy of research for effective intervention by science. In making this argument, the paper summarizes the major findings of a recent report regarding the potential impact of so-called 'disruptive' low-carbon innovations in China.

Opinions of researchers based in the UK on recruiting subjects from developing countries into randomized controlled trials.

PubMed

Newton, Sam K; Appiah-Poku, John

2007-12-01

Explaining technical terms in consent forms prior to seeking informed consent to recruit into trials can be challenging in developing countries, and more so when the studies are randomized controlled trials. This study was carried out to examine the opinions of researchers on ways of dealing with these challenges in developing countries. Recorded in-depth interviews with 12 lecturers and five doctoral students, who had carried out research in developing countries, at a leading school of public health in the United Kingdom. A purposive, snowballing approach was used to identify interviewees. Researchers were divided on the feasibility of explaining technical trials in illiterate populations; the majority of them held the view that local analogies could be used to explain these technical terms. Others were of the opinion that this could not be done since it was too difficult to explain technical trials, such as randomized controlled trials, even to people in developed countries. Researchers acknowledged the difficulty in explaining randomized controlled trials but it was also their perception that this was an important part of the ethics of the work of scientific research involving human subjects. These difficulties notwithstanding, efforts should be made to ensure that subjects have sufficient understanding to consent, taking into account the fact that peculiar situations in developing countries might compound this difficulty.

FOREIGN ASSISTANCE: Peru on Track for Free and Fair Elections but Faces Major Challenges

DTIC Science & Technology

2001-03-14

Procesos Electorales , ONPE), and the National Registry of Identification and Civil Status (Registro Nacional de Identificacion y Estado Civil, RENIEC...kind of intentional fraud and intimidation that arose last year and the type of incidental mistakes that can arise in any large election. Once the...organization Amount Technical assistance $3,298,438 Oficina Nacional de Procesos Electorales 1,520,000 International Foundation for

In situ fenestrations for the aortic arch and visceral segment: advances and challenges.

PubMed

Riga, Celia V; McWilliams, Richard G; Cheshire, Nicholas J W

2011-09-01

The management of complex aortic pathologies remains a major challenge particularly in the emergency setting. Bespoke fenestrated and branch stent graft technology has shown encouraging short- and mid-term results in selected patients. Despite tremendous technological advances in this field however, factors such as the inherent delay in device manufacturing, anatomical and technical challenges, high degree of planning, and cost hinder the wider applications of minimally invasive endovascular therapy. In situ fenestration of aortic stent grafts is an attractive alternative that eliminates the need for preoperative custom tailoring with the potential to widen the therapeutic options available and to offer a bailout option after inadvertent side branch occlusion. This article summarizes the principles of this technique and discusses its current applications.

Fostering successful scientific software communities

NASA Astrophysics Data System (ADS)

Bangerth, W.; Heister, T.; Hwang, L.; Kellogg, L. H.

2016-12-01

Developing sustainable open source software packages for the sciences appears at first to be primarily a technical challenge: How can one create stable and robust algorithms, appropriate software designs, sufficient documentation, quality assurance strategies such as continuous integration and test suites, or backward compatibility approaches that yield high-quality software usable not only by the authors, but also the broader community of scientists? However, our experience from almost two decades of leading the development of the deal.II software library (http://www.dealii.org, a widely-used finite element package) and the ASPECT code (http://aspect.dealii.org, used to simulate convection in the Earth's mantle) has taught us that technical aspects are not the most difficult ones in scientific open source software. Rather, it is the social challenge of building and maintaining a community of users and developers interested in answering questions on user forums, contributing code, and jointly finding solutions to common technical and non-technical challenges. These problems are posed in an environment where project leaders typically have no resources to reward the majority of contributors, where very few people are specifically paid for the work they do on the project, and with frequent turnover of contributors as project members rotate into and out of jobs. In particular, much software work is done by graduate students who may become fluent enough in a software only a year or two before they leave academia. We will discuss strategies we have found do and do not work in maintaining and growing communities around the scientific software projects we lead. Specifically, we will discuss the management style necessary to keep contributors engaged, ways to give credit where credit is due, and structuring documentation to decrease reliance on forums and thereby allow user communities to grow without straining those who answer questions.

A Perpendicular Biased 2nd Harmonic Cavity for the Fermilab Booster

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tan, C. Y.; Dey, J.; Madrak, R. L.

2015-07-13

A perpendicular biased 2nd harmonic cavity is currently being designed for the Fermilab Booster. Its purpose cavity is to flatten the bucket at injection and thus change the longitudinal beam distribution so that space charge effects are decreased. It can also with transition crossing. The reason for the choice of perpendicular biasing over parallel biasing is that the Q of the cavity is much higher and thus allows the accelerating voltage to be a factor of two higher than a similar parallel biased cavity. This cavity will also provide a higher accelerating voltage per meter than the present folded transmissionmore » line cavity. However, this type of cavity presents technical challenges that need to be addressed. The two major issues are cooling of the garnet material from the effects of the RF and the cavity itself from eddy current heating because of the 15 Hz bias field ramp. This paper will address the technical challenge of preventing the garnet from overheating.« less

A Thin Film Multifunction Sensor for Harsh Environments

NASA Technical Reports Server (NTRS)

Wrbanek, John D.; Fralick, Gustave C.; Martin, Lisa C.; Blaha, Charles A.

2001-01-01

The status of work at NASA Glenn Research Center to develop a minimally intrusive integrated sensor to provide realtime measurement of strain, heat flux and flow in high temperature environments is presented in this paper. The sensor can be beneficial as a single package to characterize multiple stress and strain modes simultaneously on materials and components during engine development and validation. A major technical challenge is to take existing individual gauge designs and modify them into one integrated thin film sensor. Ultimately, the goal is to develop the ability to deposit the sensors directly onto internal engine parts or on a small thin substrate that can be attached to engine components. Several prototype sensors constructed of platinum, platinum-rhodium alloy, and alumina on constant-strain alumina beams have been built and bench-tested. The technical challenges of the design. construction, and testing are discussed. Data from the preliminary testing of the sensor array is presented. The future direction for the sensor development is discussed as well.

The Challenges of Career and Technical Education Concurrent Enrollment: An Administrative Perspective

ERIC Educational Resources Information Center

Haag, Patricia W.

2015-01-01

Career and technical education concurrent enrollment may pose unique challenges in programming and enrollment for program administrators, and this chapter describes the experiences and challenges of a CTE concurrent enrollment administrator.

Laboratory Directed Research and Development 1998 Annual Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pam Hughes; Sheila Bennett eds.

1999-07-14

The Laboratory's Directed Research and Development (LDRD) program encourages the advancement of science and the development of major new technical capabilities from which future research and development will grow. Through LDRD funding, Pacific Northwest continually replenishes its inventory of ideas that have the potential to address major national needs. The LDRD program has enabled the Laboratory to bring to bear its scientific and technical capabilities on all of DOE's missions, particularly in the arena of environmental problems. Many of the concepts related to environmental cleanup originally developed with LDRD funds are now receiving programmatic support from DOE, LDRD-funded work inmore » atmospheric sciences is now being applied to DOE's Atmospheric Radiation Measurement Program. We also have used concepts initially explored through LDRD to develop several winning proposals in the Environmental Management Science Program. The success of our LDRD program is founded on good management practices that ensure funding is allocated and projects are conducted in compliance with DOE requirements. We thoroughly evaluate the LDRD proposals based on their scientific and technical merit, as well as their relevance to DOE's programmatic needs. After a proposal is funded, we assess progress annually using external peer reviews. This year, as in years past, the LDRD program has once again proven to be the major enabling vehicle for our staff to formulate new ideas, advance scientific capability, and develop potential applications for DOE's most significant challenges.« less

The role of advanced sensing in smart cities.

PubMed

Hancke, Gerhard P; Silva, Bruno de Carvalho E; Hancke, Gerhard P

2012-12-27

In a world where resources are scarce and urban areas consume the vast majority of these resources, it is vital to make cities greener and more sustainable. Advanced systems to improve and automate processes within a city will play a leading role in smart cities. From smart design of buildings, which capture rain water for later use, to intelligent control systems, which can monitor infrastructures autonomously, the possible improvements enabled by sensing technologies are immense. Ubiquitous sensing poses numerous challenges, which are of a technological or social nature. This paper presents an overview of the state of the art with regards to sensing in smart cities. Topics include sensing applications in smart cities, sensing platforms and technical challenges associated with these technologies. In an effort to provide a holistic view of how sensing technologies play a role in smart cities, a range of applications and technical challenges associated with these applications are discussed. As some of these applications and technologies belong to different disciplines, the material presented in this paper attempts to bridge these to provide a broad overview, which can be of help to researchers and developers in understanding how advanced sensing can play a role in smart cities.

The Role of Advanced Sensing in Smart Cities

PubMed Central

Hancke, Gerhard P.; de Carvalho e Silva, Bruno; Hancke, Gerhard P.

2013-01-01

In a world where resources are scarce and urban areas consume the vast majority of these resources, it is vital to make cities greener and more sustainable. Advanced systems to improve and automate processes within a city will play a leading role in smart cities. From smart design of buildings, which capture rain water for later use, to intelligent control systems, which can monitor infrastructures autonomously, the possible improvements enabled by sensing technologies are immense. Ubiquitous sensing poses numerous challenges, which are of a technological or social nature. This paper presents an overview of the state of the art with regards to sensing in smart cities. Topics include sensing applications in smart cities, sensing platforms and technical challenges associated with these technologies. In an effort to provide a holistic view of how sensing technologies play a role in smart cities, a range of applications and technical challenges associated with these applications are discussed. As some of these applications and technologies belong to different disciplines, the material presented in this paper attempts to bridge these to provide a broad overview, which can be of help to researchers and developers in understanding how advanced sensing can play a role in smart cities. PMID:23271603

The MetSkill Program — Rapidly Developing Effective Young Engineers in the Workplace

NASA Astrophysics Data System (ADS)

Drinkwater, Diana; Bianco, Nina

MetSkill is a professional development program for metallurgical engineers that integrates with normal duties in their first one or two years of service. Graduates work together on a structured technical project, facilitated by specialists and supported by formal learning, and ultimately reported to their technical managers. The program enables graduates to "fill the gaps" in their undergraduate education, which is increasingly pertinent as engineering degrees become more general. Participants report that they enjoy the focus on more challenging (rewarding) aspects of their jobs and feel more confident about problem solving. Sponsor companies add that the relationships developed with external technical specialists enhances opportunities for innovation and development. MetSkill was delivered to two major resource companies in Australia in 2012. This paper provides an outline of the program and the reasons for its success, and demonstrates how the learning model could be applied to groups of graduates in other engineering disciplines.

Future heliospheric missions from Russian perspective

NASA Astrophysics Data System (ADS)

Petrukovich, Anatoli; Izmodenov, Vladislav; Zelenyi, Lev; Kuzin, Sergey; Kuznetsov, Vladimir; Eismont, Natan

Structure and plasma processes of the heliosphere will be in the focus of attention for the next decade with the launch of Solar Orbiter, Solar Probe Plus, Interhelioprobe and SPORT, as well as the continuing flight of Voyagers and New Horizons. We review possible scientific goals and technical challenges for even more distant projects which are under discussion now. The projects include high-ecliptic observations with the help of solar sail, remote observations of heliospheric outer boundaries with interstellar medium as well as local high resolution turbulence studies. A major future challenge for the space weather research is the support for manned spaceflight beyond low Earth orbit.

A journey through meaningful use at a large academic medical center: lessons of leadership, administration, and technical implementation.

PubMed

Unger, Melissa D; Aldrich, Alison M; Hefner, Jennifer L; Rizer, Milisa K

2014-01-01

Successfully reporting meaningful use of electronic health records to the Centers for Medicare and Medicaid Services can be a challenging process, particularly for healthcare organizations with large numbers of eligible professionals. This case report describes a successful meaningful use attestation process undertaken at a major academic medical center. It identifies best practices in the areas of leadership, administration, communication, ongoing support, and technological implementation.

Computed tomography-guided percutaneous microwave ablation of hepatocellular carcinoma in challenging locations: safety and efficacy of high-power microwave platforms.

PubMed

Filippiadis, Dimitrios K; Spiliopoulos, Stavros; Konstantos, Chrysostomos; Reppas, Lazaros; Kelekis, Alexis; Brountzos, Elias; Kelekis, Nikolaos

2017-09-03

To evaluate the clinical efficacy/safety of CT-guided percutaneous microwave ablation for HCC in challenging locations using high-power microwave platforms. A retrospective review was conducted in 26 patients with 36 HCC tumours in challenging locations (hepatic dome, subcapsular, close to the heart/diaphragm/hepatic hilum, exophytic) undergoing CT-guided percutaneous microwave ablation in a single centre since January 2011. Two different microwave platforms were used both operating at 2.45 GHz: AMICA and Acculis MWA System. Patient demographics including age, sex, tumour size and location, as well as technical details were recorded. Technical success, treatment response, patients survival and complication rate were evaluated. Treated tumours were located in the hepatic dome (n = 14), subcapsularly (n = 16), in proximity to the heart (n = 2) or liver hilum (n = 2), while two were exophytic tumours at segment VI (n = 2). Mean tumour diameter was 3.30 cm (range 1.4-5 cm). In 3/26 patients (diameter >4 cm), an additional session of DEB-TACE was performed due to tumour size. Technical success rate was 100%; complete response rate was recorded in 33/36 tumours (91.6%). According to Kaplan-Meier analysis, survival rate was 92.3% and 72.11% at 24- and 60-month follow-up, respectively. There were no major complications; two cases of minor pneumothorax and two cases of small subcapsular haematoma were resolved only with observation requiring no further treatment. CT-guided percutaneous microwave ablation for hepatocellular carcinoma tumours in challenging locations and up to 5 cm in diameter can be performed with high efficacy and safety rates.

New Mexico Small Business Assistance

Science.gov Websites

expertise Technical Assistance Individual Assistance Individual Assistance Request Form Leveraged Projects Assistance (NMSBA) Program allows New Mexico small businesses facing a technical challenge to access the business, small businesses with a technical challenge can seek assistance from lab scientists or engineers

The aerodynamic challenges of the design and development of the space shuttle orbiter

NASA Technical Reports Server (NTRS)

Young, J. C.; Underwood, J. M.; Hillje, E. R.; Whitnah, A. M.; Romere, P. O.; Gamble, J. D.; Roberts, B. B.; Ware, G. M.; Scallion, W. I.; Spencer, B., Jr.

1985-01-01

The major aerodynamic design challenge at the beginning of the United States Space Transportation System (STS) research and development phase was to design a vehicle that would fly as a spacecraft during early entry and as an aircraft during the final phase of entry. The design was further complicated because the envisioned vehicle was statically unstable during a portion of the aircraft mode of operation. The second challenge was the development of preflight aerodynamic predictions with an accuracy consistent with conducting a manned flight on the initial orbital flight. A brief history of the early contractual studies is presented highlighting the technical results and management decisions influencing the aerodynamic challenges. The configuration evolution and the development of preflight aerodynamic predictions will be reviewed. The results from the first four test flights shows excellent agreement with the preflight aerodynamic predictions over the majority of the flight regimes. The only regimes showing significant disagreement is confined primarily to early entry, where prediction of the basic vehicle trim and the influence of the reaction control system jets on the flow field were found to be deficient. Postflight results are analyzed to explain these prediction deficiencies.

The MedlinePlus public user interface: studies of design challenges and opportunities.

PubMed

Marill, Jennifer L; Miller, Naomi; Kitendaugh, Paula

2006-01-01

What are the challenges involved in designing, modifying, and improving a major health information portal that serves over sixty million page views a month? MedlinePlus, the National Library of Medicine's (NLM's) consumer health Website, is examined. Challenges are presented as six "studies," which describe selected design issues and how NLM staff resolved them. Improving MedlinePlus is an iterative process. Changes in the public user interface are ongoing, reflecting Web design trends, usability testing recommendations, user survey results, new technical requirements, and the need to grow the site in an orderly way. Testing and analysis should accompany Website design modifications. New technologies may enhance a site but also introduce problems. Further modifications to MedlinePlus will be informed by the experiences described here.

The Colombian nuclear scenario: Challenges and opportunities

NASA Astrophysics Data System (ADS)

Martinez, Isabel

2016-07-01

In Colombia, the absence of nuclear-oriented policies based on technical knowledge, the closing of the Nuclear Affairs Institute (1956-1998), the association of the word "nuclear" with weapons, plus the country's last six decades of internal conflict and narcotraffic have discourage the technical, social and environmental nuclear advance. However, there are technical, social and economic national challenges that could be faced by the present nuclear technical capacities.

A Perkins Challenge: Assessing Technical Skills in CTE

ERIC Educational Resources Information Center

Stone, James R., III

2009-01-01

Federal law requires state to develop performance measures and data-collection systems for secondary and postsecondary technical-skill attainment. This poses many challenges, such as defining a technical skills, measurement and when to assess students. In this article, the author outlines various assessment models and looks at the challenges…

Education for a Working America. A Vision of Vocational Technical Education.

ERIC Educational Resources Information Center

National Association of State Directors of Vocational Technical Education Consortium.

This document presents the views of the National Association of State Directors of Vocational Technical Education regarding the challenge, mission, vision, underlying principles, practice, needs, and benefits/potential outcomes of vocational-technical education (VTE). The following topics are discussed: the challenge of making VTE the cornerstone…

Overcoming Resistance to New Ideas

ERIC Educational Resources Information Center

Powell, William; Kusuma-Powell, Ochan

2015-01-01

There are two types of challenges that adults face in their professional learning: technical and adaptive. Technical challenges simply require informational learning while adaptive challenges require transformational learning, which requires us to rethink our deeply held values, beliefs, assumptions, and even our professional identity. Adaptive…

Status of the Regenerative ECLSS Water Recovery System

NASA Technical Reports Server (NTRS)

Carter, Donald Layne

2009-01-01

NASA has completed the delivery of the regenerative Water Recovery System (WRS) for the International Space Station (ISS). The major assemblies included in this system are the Water Processor Assembly (WPA) and Urine Processor Assembly (UPA). This paper summarizes the final effort to deliver the hardware to the Kennedy Space Center for launch on STS-126, the on-orbit status as of April 2009, and describes some of the technical challenges encountered and lessons learned over the past year.

Linear Actuator System for the NASA Docking System

NASA Technical Reports Server (NTRS)

Dick, Brandon N.; Oesch, Christopher; Rupp, Timothy W.

2017-01-01

The Linear Actuator System (LAS) is a major sub-system within the NASA Docking System (NDS). The NDS Block 1 will be used on the Boeing Crew Space Transportation (CST-100) system to achieve docking with the International Space Station. Critical functions in the Soft Capture aspect of docking are performed by the LAS. This paper describes the general function of the LAS, the system's key requirements and technical challenges, and the development and qualification approach for the system.

On the Feasibility of a Pulsed 14 TeV C.M.E. Muon Collider in the LHC Tunnel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shiltsev, Vladimir; Neuffer, D.

We discuss the technical feasibility, key machine pa-rameters and major challenges of a 14 TeV c.m.e. muon-muon collider in the LHC tunnel [1]. The luminosity of the collider is evaluated for three alternative muon sources – the PS synchrotron, one of a type developed by the US Muon Accelerator Program (MAP) and a low-emittance option based on resonant μ-pair production.

A Journey through Meaningful Use at a Large Academic Medical Center: Lessons of Leadership, Administration, and Technical Implementation

PubMed Central

Unger, Melissa D.; Aldrich, Alison M.; Hefner, Jennifer L.; Rizer, Milisa K.

2014-01-01

Successfully reporting meaningful use of electronic health records to the Centers for Medicare and Medicaid Services can be a challenging process, particularly for healthcare organizations with large numbers of eligible professionals. This case report describes a successful meaningful use attestation process undertaken at a major academic medical center. It identifies best practices in the areas of leadership, administration, communication, ongoing support, and technological implementation. PMID:25593572

The potential for a new era of supersonic and hypersonic aviation

NASA Technical Reports Server (NTRS)

Harris, Roy V.

1990-01-01

A new era of supersonic and hypersonic aviation is envisioned. The potential for supersonic and hypersonic flight vehicles in this new era is analyzed. Technology challenges that must be met in order to bring in this new era of flight are discussed. The current technical status and future potential are cited in the areas of aerodynamics, propulsion, and structural materials. A next major step in the development of high-speed air transportation is suggested.

Irrigated Agriculture and Water Resources in the Western U.S. (Invited)

NASA Astrophysics Data System (ADS)

Trout, T. J.

2013-12-01

Agriculture in semi-arid areas such as the western U.S. was created by diverting and pumping water from rivers and groundwater. With that water, highly productive irrigated agriculture produces 40% of the crop value and the large majority of the fruits, vegetables, and nuts in the U.S. Irrigation water use and area is declining in the West, due both to overexploitation and increasing competing needs, although productivity continues to increase. The challenges for irrigated agriculture are to maximize productivity per unit of water consumed, minimize negative environmental impacts, and make water available to other needs while sustaining food production and rural economies. Meeting these challenges require both technical and policy advances.

Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spivey, James J.

The research summarized here has the goal of developing a fundamental understanding of how catalysts work. These materials are demonstrably essential to our daily life, from the cars we drive to the clothes we wear. Our Center advances the science behind how we prepare, analyze, and describe catalysts. This has been identified by one of the documents guiding Federal research objectives (Directing Matter and Energy: Five Challenges for Science and the Imagination): “Major challenges in heterogeneous catalysis are to more clearly define the nature of the active sites, to engineer at the molecular level catalysis with designed properties in threemore » dimensions, and to create new catalysts for new transformations.” This directly addresses this objective.« less

Using mixed methods research designs in health psychology: an illustrated discussion from a pragmatist perspective.

PubMed

Bishop, Felicity L

2015-02-01

To outline some of the challenges of mixed methods research and illustrate how they can be addressed in health psychology research. This study critically reflects on the author's previously published mixed methods research and discusses the philosophical and technical challenges of mixed methods, grounding the discussion in a brief review of methodological literature. Mixed methods research is characterized as having philosophical and technical challenges; the former can be addressed by drawing on pragmatism, the latter by considering formal mixed methods research designs proposed in a number of design typologies. There are important differences among the design typologies which provide diverse examples of designs that health psychologists can adapt for their own mixed methods research. There are also similarities; in particular, many typologies explicitly orient to the technical challenges of deciding on the respective timing of qualitative and quantitative methods and the relative emphasis placed on each method. Characteristics, strengths, and limitations of different sequential and concurrent designs are identified by reviewing five mixed methods projects each conducted for a different purpose. Adapting formal mixed methods designs can help health psychologists address the technical challenges of mixed methods research and identify the approach that best fits the research questions and purpose. This does not obfuscate the need to address philosophical challenges of mixing qualitative and quantitative methods. Statement of contribution What is already known on this subject? Mixed methods research poses philosophical and technical challenges. Pragmatism in a popular approach to the philosophical challenges while diverse typologies of mixed methods designs can help address the technical challenges. Examples of mixed methods research can be hard to locate when component studies from mixed methods projects are published separately. What does this study add? Critical reflections on the author's previously published mixed methods research illustrate how a range of different mixed methods designs can be adapted and applied to address health psychology research questions. The philosophical and technical challenges of mixed methods research should be considered together and in relation to the broader purpose of the research. © 2014 The British Psychological Society.

International Approaches for Nuclear Waste Disposal in Geological Formations: Geological Challenges in Radioactive Waste Isolation—Fifth Worldwide Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Faybishenko, Boris; Birkholzer, Jens; Sassani, David

The overall objective of the Fifth Worldwide Review (WWR-5) is to document the current state-of-the-art of major developments in a number of nations throughout the World pursuing geological disposal programs, and to summarize challenging problems and experience that have been obtained in siting, preparing and reviewing cases for the operational and long-term safety of proposed and operating nuclear waste repositories. The scope of the Review is to address current specific technical issues and challenges in safety case development along with the interplay of technical feasibility, siting, engineering design issues, and operational and post-closure safety. In particular, the chapters included inmore » the report present the following types of information: the current status of the deep geological repository programs for high level nuclear waste and low- and intermediate level nuclear waste in each country, concepts of siting and radioactive waste and spent nuclear fuel management in different countries (with the emphasis of nuclear waste disposal under different climatic conditions and different geological formations), progress in repository site selection and site characterization, technology development, buffer/backfill materials studies and testing, support activities, programs, and projects, international cooperation, and future plans, as well as regulatory issues and transboundary problems.« less

Where Is Current Research on Blockchain Technology?—A Systematic Review

PubMed Central

Yli-Huumo, Jesse; Ko, Deokyoon; Park, Sooyong; Smolander, Kari

2016-01-01

Blockchain is a decentralized transaction and data management technology developed first for Bitcoin cryptocurrency. The interest in Blockchain technology has been increasing since the idea was coined in 2008. The reason for the interest in Blockchain is its central attributes that provide security, anonymity and data integrity without any third party organization in control of the transactions, and therefore it creates interesting research areas, especially from the perspective of technical challenges and limitations. In this research, we have conducted a systematic mapping study with the goal of collecting all relevant research on Blockchain technology. Our objective is to understand the current research topics, challenges and future directions regarding Blockchain technology from the technical perspective. We have extracted 41 primary papers from scientific databases. The results show that focus in over 80% of the papers is on Bitcoin system and less than 20% deals with other Blockchain applications including e.g. smart contracts and licensing. The majority of research is focusing on revealing and improving limitations of Blockchain from privacy and security perspectives, but many of the proposed solutions lack concrete evaluation on their effectiveness. Many other Blockchain scalability related challenges including throughput and latency have been left unstudied. On the basis of this study, recommendations on future research directions are provided for researchers. PMID:27695049

Where Is Current Research on Blockchain Technology?-A Systematic Review.

PubMed

Yli-Huumo, Jesse; Ko, Deokyoon; Choi, Sujin; Park, Sooyong; Smolander, Kari

2016-01-01

Blockchain is a decentralized transaction and data management technology developed first for Bitcoin cryptocurrency. The interest in Blockchain technology has been increasing since the idea was coined in 2008. The reason for the interest in Blockchain is its central attributes that provide security, anonymity and data integrity without any third party organization in control of the transactions, and therefore it creates interesting research areas, especially from the perspective of technical challenges and limitations. In this research, we have conducted a systematic mapping study with the goal of collecting all relevant research on Blockchain technology. Our objective is to understand the current research topics, challenges and future directions regarding Blockchain technology from the technical perspective. We have extracted 41 primary papers from scientific databases. The results show that focus in over 80% of the papers is on Bitcoin system and less than 20% deals with other Blockchain applications including e.g. smart contracts and licensing. The majority of research is focusing on revealing and improving limitations of Blockchain from privacy and security perspectives, but many of the proposed solutions lack concrete evaluation on their effectiveness. Many other Blockchain scalability related challenges including throughput and latency have been left unstudied. On the basis of this study, recommendations on future research directions are provided for researchers.

Production of Copper-Plated Beamline Bellows and Spools for LCLS-II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, Katherine M.; Carpenter, Brian C.; Daly, Ed

The SLAC National Accelerator Laboratory is currently constructing a major upgrade to its accelerator, the Linac Coherent Light Source II (LCLS-II). Several Department of Energy national laboratories, including the Thomas Jefferson National Accelerator Facility (JLab) and Fermi National Accelerator Laboratory (FNAL), are participating in this project. The 1.3-GHz cryomodules for this project consist of eight cavities separated by bellows (expansion joints) and spools (tube sections), which are copper plated for RF conduction. JLab is responsible for procurement of these bellows and spools, which are delivered to JLab and FNAL for assembly into cryomodules. Achieving accelerator-grade copper plating is always amore » challenge and requires careful specification of requirements and application of quality control processes. Due to the demanding technical requirements of this part, JLab implemented procurement strategies to make the process more efficient as well as provide process redundancy. This paper discusses the manufacturing challenges that were encountered and resolved, as well as the strategies that were employed to minimize the impact of any technical issues.« less

Security challenges in integration of a PHR-S into a standards based national EHR.

PubMed

Mense, Alexander; Hoheiser Pförtner, Franz; Sauermann, Stefan

2014-01-01

Health related data provided by patients themselves is expected to play a major role in future healthcare. Data from personal health devices, vaccination records, health diaries or observations of daily living, for instance, is stored in personal health records (PHR) which are maintained by personal health record systems (PHR-S). Combining this information with medical records provided by healthcare providers in electronic health records (EHR) is one of the next steps towards "personal care". Austria currently sets up a nationwide EHR system that incorporates all healthcare providers and is technically based on international standards (IHE, HL7, OASIS, ...). Looking at the expected potential of merging PHR and EHR data it is worth to analyse integration approaches. Although knowing that an integration requires the coordination of processes, information models and technical architectures, this paper specifically focuses on security issues by evaluating general security requirements for a PHR-S (based on HL7 PHR-S FM), comparing them with the information security specifications for the Austrian's national EHR (based on ISO/IES 27000 series) and identifying the main challenges as well as possible approaches.

"Endovascular embolic hemispherectomy": a strategy for the initial management of catastrophic holohemispheric epilepsy in the neonate.

PubMed

Oluigbo, Chima; Pearl, Monica S; Tsuchida, Tammy N; Chang, Taeun; Ho, Cheng-Ying; Gaillard, William D

2017-03-01

Conflicting challenges abound in the management of the newborn with intractable epilepsy related to hemimegalencephaly. Early hemispherectomy to stop seizures and prevent deleterious consequences to future neurocognitive development must be weighed against the technical and anesthetic challenges of performing major hemispheric surgery in the neonate. We hereby present our experience with two neonates with hemimegalencephaly and intractable seizures who were managed using a strategy of initial minimally invasive embolization of the cerebral blood supply to the involved hemisphere. Immediate significant seizure control was achieved after embolization of the cerebral blood supply to the involved hemisphere followed by delayed ipsilateral hemispheric resection at a later optimal age. The considerations and challenges encountered in the course of the management of these patients are discussed, and a literature review is presented.

Scaffold Translation: Barriers Between Concept and Clinic

PubMed Central

Murphy, William L.

2011-01-01

Translation of scaffold-based bone tissue engineering (BTE) therapies to clinical use remains, bluntly, a failure. This dearth of translated tissue engineering therapies (including scaffolds) remains despite 25 years of research, research funding totaling hundreds of millions of dollars, over 12,000 papers on BTE and over 2000 papers on BTE scaffolds alone in the past 10 years (PubMed search). Enabling scaffold translation requires first an understanding of the challenges, and second, addressing the complete range of these challenges. There are the obvious technical challenges of designing, manufacturing, and functionalizing scaffolds to fill the Form, Fixation, Function, and Formation needs of bone defect repair. However, these technical solutions should be targeted to specific clinical indications (e.g., mandibular defects, spine fusion, long bone defects, etc.). Further, technical solutions should also address business challenges, including the need to obtain regulatory approval, meet specific market needs, and obtain private investment to develop products, again for specific clinical indications. Finally, these business and technical challenges present a much different model than the typical research paradigm, presenting the field with philosophical challenges in terms of publishing and funding priorities that should be addressed as well. In this article, we review in detail the technical, business, and philosophical barriers of translating scaffolds from Concept to Clinic. We argue that envisioning and engineering scaffolds as modular systems with a sliding scale of complexity offers the best path to addressing these translational challenges. PMID:21902613

Blood Sampling and Preparation Procedures for Proteomic Biomarker Studies of Psychiatric Disorders.

PubMed

Guest, Paul C; Rahmoune, Hassan

2017-01-01

A major challenge in proteomic biomarker discovery and validation for psychiatric diseases is the inherent biological complexity underlying these conditions. There are also many technical issues which hinder this process such as the lack of standardization in sampling, processing and storage of bio-samples in preclinical and clinical settings. This chapter describes a reproducible procedure for sampling blood serum and plasma that is specifically designed for maximizing data quality output in two-dimensional gel electrophoresis, multiplex immunoassay and mass spectrometry profiling studies.

Employment of telemedicine in emergency medicine. Clinical requirement analysis, system development and first test results.

PubMed

Czaplik, M; Bergrath, S; Rossaint, R; Thelen, S; Brodziak, T; Valentin, B; Hirsch, F; Beckers, S K; Brokmann, J C

2014-01-01

Demographic change, rising co-morbidity and an increasing number of emergencies are the main challenges that emergency medical services (EMS) in several countries worldwide are facing. In order to improve quality in EMS, highly trained personnel and well-equipped ambulances are essential. However several studies have shown a deficiency in qualified EMS physicians. Telemedicine emerges as a complementary system in EMS that may provide expertise and improve quality of medical treatment on the scene. Hence our aim is to develop and test a specific teleconsultation system. During the development process several use cases were defined and technically specified by medical experts and engineers in the areas of: system administration, start-up of EMS assistance systems, audio communication, data transfer, routine tele-EMS physician activities and research capabilities. Upon completion, technical field tests were performed under realistic conditions to test system properties such as robustness, feasibility and usability, providing end-to-end measurements. Six ambulances were equipped with telemedical facilities based on the results of the requirement analysis and 55 scenarios were tested under realistic conditions in one month. The results indicate that the developed system performed well in terms of usability and robustness. The major challenges were, as expected, mobile communication and data network availability. Third generation networks were only available in 76.4% of the cases. Although 3G (third generation), such as Universal Mobile Telecommunications System (UMTS), provides beneficial conditions for higher bandwidth, system performance for most features was also acceptable under adequate 2G (second generation) test conditions. An innovative concept for the use of telemedicine for medical consultations in EMS was developed. Organisational and technical aspects were considered and practical requirements specified. Since technical feasibility was demonstrated in these technical field tests, the next step would be to prove medical usefulness and technical robustness under real conditions in a clinical trial.

City-integrated renewable energy for urban sustainability.

PubMed

Kammen, Daniel M; Sunter, Deborah A

2016-05-20

To prepare for an urban influx of 2.5 billion people by 2050, it is critical to create cities that are low-carbon, resilient, and livable. Cities not only contribute to global climate change by emitting the majority of anthropogenic greenhouse gases but also are particularly vulnerable to the effects of climate change and extreme weather. We explore options for establishing sustainable energy systems by reducing energy consumption, particularly in the buildings and transportation sectors, and providing robust, decentralized, and renewable energy sources. Through technical advancements in power density, city-integrated renewable energy will be better suited to satisfy the high-energy demands of growing urban areas. Several economic, technical, behavioral, and political challenges need to be overcome for innovation to improve urban sustainability. Copyright © 2016, American Association for the Advancement of Science.

First Li-Ion Battery On-Board A Russian Commercial Geo Satellite

NASA Astrophysics Data System (ADS)

Masgrangeas, David; Lagattu, Benoit; Nesterishin, Michael; Krenko, Alexander

2011-10-01

This paper deals with the first integration of a Li-ion battery from a western company aboard a Russian commercial GEO satellite. State of the art electrochemistry allied with innovative battery design lead to successful contract for development, manufacturing and delivery of flight hardware. After several months of joint technical work, two batteries were delivered for integration and tested inside a GEO spacecraft. Delivery conditions of a Li-ion battery were also part of the challenge and were successfully filled by both parties. This paper presents the first results of interfacing batteries and spacecraft. Mechanical, thermal and electrical aspects are discussed as well as learned lessons. Beyond cultural and technical habits and despite language barriers, this contract was a true success story between two major companies, each leading its own market share.

Vocational and Technical Education in Lebanon: Strategic Issues and Challenges

ERIC Educational Resources Information Center

Karam, Gebran

2006-01-01

The current status of the Lebanese vocational and technical education (VTE) system is assessed and the strategic issues and challenges facing it are identified. In addition to the economic and social challenges that are common to many developing countries, the Lebanese system suffers from idiosyncratic problems, which may require innovative and…

Recent microfluidic devices for studying gamete and embryo biomechanics.

PubMed

Lai, David; Takayama, Shuichi; Smith, Gary D

2015-06-25

The technical challenges of biomechanic research such as single cell analysis at a high monetary cost, labor, and time for just a small number of measurements is a good match to the strengths of microfluidic devices. New scientific discoveries in the fertilization and embryo development process, of which biomechanics is a major subset of interest, is crucial to fuel the continual improvement of clinical practice in assisted reproduction. The following review will highlight some recent microfluidic devices tailored for gamete and embryo biomechanics where biomimicry arises as a major theme of microfluidic device design and function, and the application of fundamental biomechanic principles are used to improve outcomes of cryopreservation. Copyright © 2015 Elsevier Ltd. All rights reserved.

Decoding genes with coexpression networks and metabolomics - 'majority report by precogs'.

PubMed

Saito, Kazuki; Hirai, Masami Y; Yonekura-Sakakibara, Keiko

2008-01-01

Following the sequencing of whole genomes of model plants, high-throughput decoding of gene function is a major challenge in modern plant biology. In view of remarkable technical advances in transcriptomics and metabolomics, integrated analysis of these 'omics' by data-mining informatics is an excellent tool for prediction and identification of gene function, particularly for genes involved in complicated metabolic pathways. The availability of Arabidopsis public transcriptome datasets containing data of >1000 microarrays reinforces the potential for prediction of gene function by transcriptome coexpression analysis. Here, we review the strategy of combining transcriptome and metabolome as a powerful technology for studying the functional genomics of model plants and also crop and medicinal plants.

Supersonics Project: Airport Noise Technical Challenge

NASA Technical Reports Server (NTRS)

Bridges, James E.

2008-01-01

This presentation gives an overview of the work being done under the Airport Noise Technical Challenge portion of the Supersonics Project in the Fundamental Aeronautics Program. The objective of the Challenge is to provide technology (e.g. low noise nozzle concepts) and engineering tools required for a viable supersonic aircraft. To accomplish this we have activities divided into Prediction, Diagnostics, and Engineering elements. Each of the tasks reviewed here have potential applications to work being done at other flight regimes and other aircraft and are of interest to the Acoustics Technical Working Group.

Health and Safety Advisory Committee (HASAC) of the International Embryo Transfer Society (IETS) has managed critical challenges for two decades.

PubMed

Thibier, M; Stringfellow, D A

2003-02-01

The International Embryo Transfer Society (IETS) was founded in 1974. Early members used the society as a forum for the exchange of scientific and technical information relevant to a newly emerging embryo transfer industry. The impact that embryo transfer could have on the international trade of livestock genetics was clear by 1982, so the IETS commissioned the Import/Export Committee. The initial challenge for this Committee was to deal with concerns about disease transmission via embryo transfer. Many of the early concerns have been dispelled, but at the time they threatened the continued development of a fledgling industry. Over the past two decades, many new critical challenges have been met and managed by this Committee, which was recently renamed the Health and Safety Advisory Committee (HASAC). Assessing risks of animal disease transmission via reproductive technologies and establishing protocols for managing these risks are still major issues for HASAC. However, additional concerns have developed as views of the society changed and as novel applications of biotechnology in farm animals were identified. This paper is intended to chronicle some of the major changes and challenges that were managed by members of the HASAC and its Subcommittees from the early years of embryo transfer to the current millennium with technological advances in molecular biology.

Reaching a 1.5°C target: socio-technical challenges for a rapid transition to low-carbon electricity systems.

PubMed

Eyre, Nick; Darby, Sarah J; Grünewald, Philipp; McKenna, Eoghan; Ford, Rebecca

2018-05-13

A 1.5°C global average target implies that we should no longer focus on merely incremental emissions reductions from the electricity system, but rather on fundamentally re-envisaging a system that, sooner rather than later, becomes carbon free. Many low-carbon technologies are surpassing mainstream predictions for both uptake and cost reduction. Their deployment is beginning to be disruptive within established systems. 'Smart technologies' are being developed to address emerging challenges of system integration, but their rates of future deployment remain uncertain. We argue that transition towards a system that can fully displace carbon generation sources will require expanding the focus of our efforts beyond technical solutions. Recognizing that change has social and technical dimensions, and that these interact strongly, we set out a socio-technical review that covers electricity infrastructure, citizens, business models and governance. It describes some of the socio-technical challenges that need to be addressed for the successful transition of the existing electricity systems. We conclude that a socio-technical understanding of electricity system transitions offers new and better insights into the potential and challenges for rapid decarbonization.This article is part of the theme issue 'The Paris Agreement: understanding the physical and social challenges for a warming world of 1.5°C above pre-industrial levels'. © 2018 The Author(s).

Membranes for bioelectrochemical systems: challenges and research advances.

PubMed

Dhar, Bipro Ranjan; Lee, Hyung-Sool

2013-01-01

Increasing energy demand has been a big challenge for current society, as the fossil fuel sources are gradually decreasing. Hence, development of renewable and sustainable energy sources for the future is considered one of the top priorities in national strategic plans. Bioenergy can meet future energy requirements - renewability, sustainability, and even carbon-neutrality. Bioenergy production from wastes and wastewaters is especially attractive because of dual benefits of energy generation and contaminant stabilization. There are several bioenergy technologies using wastes and wastewaters as electron donor, which include anaerobic digestion, dark biohydrogen fermentation, biohydrogen production using photosynthetic microorganisms, and bioelectrochemical systems (BESs). Among them BES seems to be very promising as we can produce a variety of value-added products from wastes and wastewaters, such as electric power, hydrogen gas, hydrogen peroxide, acetate, ethanol etc. Most ofthe traditional BES uses a membrane to separate the anode and cathode chamber, which is essential for improving microbial metabolism on the anode and the recovery of value-added products on the cathode. Performance of BES lacking a membrane can be seriously deteriorated, due to oxygen diffusion or substantial loss of synthesized products. For this reason, usage of a membrane seems essential to facilitate BES performance. However, a membrane can bring several technical challenges to BES application compared to membrane-less BES. These challenges include poor proton permeability, substrate loss, oxygen back diffusion, pH gradient, internal resistance, biofouling, etc. This paper aims to review the major technical barriers associated with membranes and future research directions for their application in BESs.

NASA's Space Launch Transitions: From Design to Production

NASA Technical Reports Server (NTRS)

Askins, Bruce; Robinson, Kimberly

2016-01-01

NASA's Space Launch System (SLS) successfully completed its Critical Design Review (CDR) in 2015, a major milestone on the journey to an unprecedented era of exploration for humanity. CDR formally marked the program's transition from design to production phase just four years after the program's inception and the first such milestone for a human launch vehicle in 40 years. While challenges typical of a complex development program lie ahead, CDR evaluators concluded that the design is technically and programmatically sound and ready to press forward to Design Certification Review (DCR) and readiness for launch of Exploration Mission 1 (EM-1) in the 2018 timeframe. SLS is prudently based on existing propulsion systems, infrastructure and knowledge with a clear, evolutionary path as required by mission needs. In its initial configuration, designated Block I, SLS will a minimum of 70 metric tons (t) of payload to low Earth orbit (LEO). It can evolve to a 130 t payload capacity by upgrading its engines, boosters, and upper stage, dramatically increasing the mass and volume of human and robotic exploration while decreasing mission risk, increasing safety, and simplifying ground and mission operations. CDR was the central programmatic accomplishment among many technical accomplishments that will be described in this paper. The government/industry SLS team successfully test fired a flight-like five-segment solid rocket motor, as well as seven hotfire development tests of the RS-25 core stage engine. The majority of the major test article and flight barrels, rings, and domes for the core stage liquid oxygen, liquid hydrogen, engine section, intertank, and forward skirt were manufactured at NASA's Michoud Assembly Facility. Renovations to the B-2 test stand for stage green run testing were completed at NASA Stennis Space Center. Core stage test stands are rising at NASA Marshall Space Flight Center. The modified Pegasus barge for core stage transportation from manufacturing to testing and launch sites was delivered. The Interim Cryogenic Propulsion System test article was also completed. This paper will discuss these and other technical and programmatic successes and challenges over the past year and provide a preview of work ahead before the first flight of this new capability.

Scaffold translation: barriers between concept and clinic.

PubMed

Hollister, Scott J; Murphy, William L

2011-12-01

Translation of scaffold-based bone tissue engineering (BTE) therapies to clinical use remains, bluntly, a failure. This dearth of translated tissue engineering therapies (including scaffolds) remains despite 25 years of research, research funding totaling hundreds of millions of dollars, over 12,000 papers on BTE and over 2000 papers on BTE scaffolds alone in the past 10 years (PubMed search). Enabling scaffold translation requires first an understanding of the challenges, and second, addressing the complete range of these challenges. There are the obvious technical challenges of designing, manufacturing, and functionalizing scaffolds to fill the Form, Fixation, Function, and Formation needs of bone defect repair. However, these technical solutions should be targeted to specific clinical indications (e.g., mandibular defects, spine fusion, long bone defects, etc.). Further, technical solutions should also address business challenges, including the need to obtain regulatory approval, meet specific market needs, and obtain private investment to develop products, again for specific clinical indications. Finally, these business and technical challenges present a much different model than the typical research paradigm, presenting the field with philosophical challenges in terms of publishing and funding priorities that should be addressed as well. In this article, we review in detail the technical, business, and philosophical barriers of translating scaffolds from Concept to Clinic. We argue that envisioning and engineering scaffolds as modular systems with a sliding scale of complexity offers the best path to addressing these translational challenges. © Mary Ann Liebert, Inc.

Integrating security in multiple, remote, and diverse facilities: how major health systems are meeting today's and tomorrow's technological and organizational challenges.

PubMed

1996-11-01

As the trend to mergers and diversification of healthcare facilities grows, so too does the challenge to security directors to effectively and efficiently protect not only acute care, emergency, and outpatient facilities, but physician office buildings, parking garages, long-term-care units, medical schools, technical service units, and even health clubs. Besides the different security and communications problems posed by each type of facility, the problem of distance between facilities and their geographic location must also be met. In this report, we'll update you on the approaches being taken by security and planning executives at three leading health systems and how they are dealing with current and future problems.

Protein glycosylation in diverse cell systems: implications for modification and analysis of recombinant proteins.

PubMed

Brooks, Susan A

2006-06-01

A major challenge for the biotechnology industry is to engineer the glycosylation pathways of expression systems to synthesize recombinant proteins with human glycosylation. Inappropriate glycosylation can result in reduced activity, limited half-life in circulation and unwanted immunogenicity. In this review, the complexities of glycosylation in human cells are explained and compared with glycosylation in bacteria, yeasts, fungi, insects, plants and nonhuman mammalian species. Key advances in the engineering of the glycosylation of expression systems are highlighted. Advances in the challenging and technically complex field of glycan analysis are also described. The emergence of a new generation of expression systems with sophisticated engineering for humanized glycosylation of glycoproteins appears to be on the horizon.

Under the sea: microbial life in volcanic oceanic crust.

PubMed

Edwards, Katrina J; Wheat, C Geoffrey; Sylvan, Jason B

2011-09-06

Exploration of the microbiology in igneous, 'hard rock' oceanic crust represents a major scientific frontier. The igneous crust harbours the largest aquifer system on Earth, most of which is hydrologically active, resulting in a substantial exchange of fluids, chemicals and microorganisms between oceanic basins and crustal reservoirs. Study of the deep-subsurface biosphere in the igneous crust is technically challenging. However, technologies have improved over the past decade, providing exciting new opportunities for the study of deep-seated marine life, including in situ and cross-disciplinary experimentation in microbiology, geochemistry and hydrogeology. In this Progress article, we describe the recent advances, available technology and remaining challenges in the study of the marine intraterrestrial microbial life that is harboured in igneous oceanic crust.

SOFIA Program SE and I Lessons Learned

NASA Technical Reports Server (NTRS)

Ray, Ronald J.; Fobel, Laura J.; Brignola, Michael P.

2011-01-01

Once a "Troubled Project" threatened with cancellation, the Stratospheric Observatory for Infrared Astronomy (SOFIA) Program has overcome many difficult challenges and recently achieved its first light images. To achieve success, SOFIA had to overcome significant deficiencies in fundamental Systems Engineering identified during a major Program restructuring. This presentation will summarize the lessons learn in Systems Engineering on the SOFIA Program. After the Program was reformulated, an initial assessment of Systems Engineering established the scope of the problem and helped to set a list of priorities that needed to be work. A revised Systems Engineering Management Plan (SEMP) was written to address the new Program structure and requirements established in the approved NPR7123.1A. An important result of the "Technical Planning" effort was the decision by the Program and Technical Leadership team to re-phasing the lifecycle into increments. The reformed SOFIA Program Office had to quickly develop and establish several new System Engineering core processes including; Requirements Management, Risk Management, Configuration Management and Data Management. Implementing these processes had to consider the physical and cultural diversity of the SOFIA Program team which includes two Projects spanning two NASA Centers, a major German partnership, and sub-contractors located across the United States and Europe. The SOFIA Program experience represents a creative approach to doing "System Engineering in the middle" while a Program is well established. Many challenges were identified and overcome. The SOFIA example demonstrates it is never too late to benefit from fixing deficiencies in the System Engineering processes.

Using natural products for drug discovery: the impact of the genomics era.

PubMed

Zhang, Mingzi M; Qiao, Yuan; Ang, Ee Lui; Zhao, Huimin

2017-05-01

Evolutionarily selected over billions of years for their interactions with biomolecules, natural products have been and continue to be a major source of pharmaceuticals. In the 1990s, pharmaceutical companies scaled down their natural product discovery programs in favor of synthetic chemical libraries due to major challenges such as high rediscovery rates, challenging isolation, and low production titers. Propelled by advances in DNA sequencing and synthetic biology technologies, insights into microbial secondary metabolism provided have inspired a number of strategies to address these challenges. Areas covered: This review highlights the importance of genomics and metagenomics in natural product discovery, and provides an overview of the technical and conceptual advances that offer unprecedented access to molecules encoded by biosynthetic gene clusters. Expert opinion: Genomics and metagenomics revealed nature's remarkable biosynthetic potential and her vast chemical inventory that we can now prioritize and systematically mine for novel chemical scaffolds with desirable bioactivities. Coupled with synthetic biology and genome engineering technologies, significant progress has been made in identifying and predicting the chemical output of biosynthetic gene clusters, as well as in optimizing cluster expression in native and heterologous host systems for the production of pharmaceutically relevant metabolites and their derivatives.

Using natural products for drug discovery: the impact of the genomics era

PubMed Central

Zhang, Mingzi M; Qiao, Yuan; Ang, Ee Lui; Zhao, Huimin

2017-01-01

Introduction Evolutionarily selected over billions of years for their interactions with biomolecules, natural products have been and continue to be a major source of pharmaceuticals. In the 1990s, pharmaceutical companies scaled down their natural product discovery programs in favor of synthetic chemical libraries due to major challenges such as high rediscovery rates, challenging isolation, and low production titers. Propelled by advances in DNA sequencing and synthetic biology technologies, insights into microbial secondary metabolism provided have inspired a number of strategies to address these challenges. Areas covered This review highlights the importance of genomics and metagenomics in natural product discovery, and provides an overview of the technical and conceptual advances that offer unprecedented access to molecules encoded by biosynthetic gene clusters. Expert opinion Genomics and metagenomics revealed nature’s remarkable biosynthetic potential and her vast chemical inventory that we can now prioritize and systematically mine for novel chemical scaffolds with desirable bioactivities. Coupled with synthetic biology and genome engineering technologies, significant progress has been made in identifying and predicting the chemical output of biosynthetic gene clusters, as well as in optimizing cluster expression in native and heterologous host systems for the production of pharmaceutically relevant metabolites and their derivatives. PMID:28277838

Digital Pharmacovigilance and Disease Surveillance: Combining Traditional and Big-Data Systems for Better Public Health

PubMed Central

Salathé, Marcel

2016-01-01

The digital revolution has contributed to very large data sets (ie, big data) relevant for public health. The two major data sources are electronic health records from traditional health systems and patient-generated data. As the two data sources have complementary strengths—high veracity in the data from traditional sources and high velocity and variety in patient-generated data—they can be combined to build more-robust public health systems. However, they also have unique challenges. Patient-generated data in particular are often completely unstructured and highly context dependent, posing essentially a machine-learning challenge. Some recent examples from infectious disease surveillance and adverse drug event monitoring demonstrate that the technical challenges can be solved. Despite these advances, the problem of verification remains, and unless traditional and digital epidemiologic approaches are combined, these data sources will be constrained by their intrinsic limits. PMID:28830106

Technical Writing Teachers and the Challenges of Desktop Publishing.

ERIC Educational Resources Information Center

Kalmbach, James

1988-01-01

Argues that technical writing teachers must understand desktop publishing. Discusses the strengths that technical writing teachers bring to desktop publishing, and the impact desktop publishing will have on technical writing courses and programs. (ARH)

[Governance of HIV/AIDS organizations in Bobo-Dioulasso (Burkina Faso)].

PubMed

Sanon, Anselme; Berthé, Abdramane; Traoré, Isidore; Ouédraogo, Salif; Etoudji, Albert; Konaté, Issouf; Thiénou, Jean Richard; Konaté, Blahima; Barbari, Aboubaracri; Soulama, Achille; Nagot, Nicolas

2014-01-01

Although HIV/AIDS organizations continue to play a major role in the fight against pandemic HIV infections, they are still faced with enormous governance challenges that impair their operations / interventions and their sustainability. The objective of this study was to develop an inventory of the quality of governance within HIV/AIDS organizations in Bobo-Dioulasso. This qualitative research was conducted in 40 organizations from Bobo-Dioulasso. Qualitative data were collected over a 45-day period using an interview guide. Thematic analysis of the data was performed and the results were reported. Although all 40 organizations had established good governance mechanisms, only fifteen complied with the major rules of democratic functioning and the roles of the various bodies. The majority of these organizations (29/40) ignored many democratic rules. The number of members required for the Executive Board was not met in 29/40 organizations resulting in monopolization of decision-making by a handful of people. Technical and financial reports were not published, resulting in limited access to information on the organization's activities. Gender equality also constituted a weakness. Application of good governance principles was limited in these organizations. Organization members, leaders and technical and financial partners must reinforce good governance efforts in order to improve good governance in these organizations.

Advances in addressing technical challenges of point-of-care diagnostics in resource-limited settings

PubMed Central

Wang, ShuQi; Lifson, Mark A.; Inci, Fatih; Liang, Li-Guo; Sheng, Ye-Feng; Demirci, Utkan

2016-01-01

The striking prevalence of HIV, TB and malaria, as well as outbreaks of emerging infectious diseases, such as influenza A (H7N9), Ebola and MERS, poses great challenges for patient care in resource-limited settings (RLS). However, advanced diagnostic technologies cannot be implemented in RLS largely due to economic constraints. Simple and inexpensive point-of-care (POC) diagnostics, which rely less on environmental context and operator training, have thus been extensively studied to achieve early diagnosis and treatment monitoring in non-laboratory settings. Despite great input from material science, biomedical engineering and nanotechnology for developing POC diagnostics, significant technical challenges are yet to be overcome. Summarized here are the technical challenges associated with POC diagnostics from a RLS perspective and the latest advances in addressing these challenges are reviewed. PMID:26777725

Oil-Free Shaft Support System Rotordynamics: Past, Present, and Future Challenges and Opportunities

NASA Technical Reports Server (NTRS)

DellaCorte, Christopher

2011-01-01

Recent breakthroughs in Oil-Free technologies have enabled new high-speed rotor systems and turbomachinery. Such technologies can include compliant-surface gas bearings, magnetic bearings, and advanced solid lubricants and tribo-materials. This presentation briefly reviews critical technology developments and the current state-of-the-art, emerging Oil-Free rotor systems and discusses obstacles preventing more widespread use. Key examples of "best practices" for deploying Oil-Free technologies will be presented and remaining major technical questions surrounding Oil-Free technologies will be brought forward.

Evaluation of Warm and Cold Shaft Designs for Large Multi-megawatt Direct Drive Offshore Superconducting Wind Generators

NASA Astrophysics Data System (ADS)

Kulkarni, Devdatta; Chen, Edward; Ho, Mantak; Karmaker, Haran

For offshore large multi-megawatt direct drive wind generators, because of its ability to generate high flux fields, superconducting (SC) technology can offer significant size and mass reduction over traditional technologies. However, cryogenic cooling design remains as one of the major obstacles to overcome. Different cryogenic cooling designs, such as warm shaft and cold shaft rotor design, present different advantages and challenges technically and commercially. This paper presents the investigations on both designs for large SC generators from manufacturability and service perspectives.

An innovative use of instant messaging technology to support a library's single-service point.

PubMed

Horne, Andrea S; Ragon, Bart; Wilson, Daniel T

2012-01-01

A library service model that provides reference and instructional services by summoning reference librarians from a single service point is described. The system utilizes Libraryh3lp, an open-source, multioperator instant messaging system. The selection and refinement of this solution and technical challenges encountered are explored, as is the design of public services around this technology, usage of the system, and best practices. This service model, while a major cultural and procedural change at first, is now a routine aspect of customer service for this library.

Current Trends in the Management of Blunt Solid Organ Injuries.

PubMed

Taviloglu, Korhan; Yanar, Hakan

2009-04-01

The management of patients with solid organ injuries has changed since the introduction of technically advanced imaging tools, such as ultrasonography and multiple scan computerized tomography, interventional radiological techniques and modern intensive care units. In spite of this development in the management of these patients, major solid organ traumas can still be challenging. There has been great improvement in the non-operative management (NOM) of intra-abdominal solid organ injury in recent decades. In most cases treatment of injuries has shifted from early surgical treatment to NOM.

Lignin carbon fiber: The path for quality

DOE PAGES

Yuan, Joshua S.; Li, Qiang; Ragauskas, Arthur J.

2017-03-01

Lignin represents an abundant biopolymer and a major waste from lignocellulosic processing plants, yet the utilization of lignin for fungible products remains one of the most challenging technical barriers for pulp mills and the modern biorefinery industry. In recent decades, lignin has been sought after as a precursor polymer for carbon fiber due to the high carbon content (up to 60%). Furthermore lignin carbon fiber is expected to be compatible with the market size of the pulp and paper industry and may have transformative impact on petroleum-based carbon fiber.

Foraminoplastic transfacet epidural endoscopic approach for removal of intraforaminal disc herniation at the L5-S1 level

PubMed Central

Kaczmarczyk, Jacek; Nowakowski, Andrzej; Sulewski, Adam

2014-01-01

Transforaminal endoscopic disc removal in the L5-S1 motion segment of the lumbar spine creates a technical challenge due to anatomical reasons and individual variability. The majority of surgeons prefer a posterior classical or minimally invasive approach. There is only one foraminoplastic modification of the technique in the literature so far. In this paper we present a new technique with a foraminoplastic transfacet approach that may be suitable in older patients with advanced degenerative disease of the spine. PMID:24729817

Linear Actuator System for the NASA Docking System

NASA Technical Reports Server (NTRS)

Dick, Brandon; Oesch, Chris

2017-01-01

The Linear Actuator System (LAS) is a major sub-system within the NASA Docking System (NDS). The NDS Block 1 will be used on the Boeing Crew Space Transportation (CST-100) system to achieve docking with the International Space Station. Critical functions in the Soft Capture aspect of docking are performed by the LAS, which implements the Soft Impact Mating and Attenuation Concept (SIMAC). This paper describes the general function of the LAS, the system's key requirements and technical challenges, and the development and qualification approach for the system.

Overview of Frontal Sinus Pathology and Management.

PubMed

Vázquez, Alejandro; Baredes, Soly; Setzen, Michael; Eloy, Jean Anderson

2016-08-01

The frontal sinus is the most complex of all paranasal sinuses. Given its proximity to the cranial vault and orbit, frontal sinus pathology can progress to involve these structures and lead to significant morbidity, or even mortality. Surgical management of the frontal sinus is technically challenging. Various open and endoscopic surgical techniques are available to the otolaryngologist. This article presents an overview of the major disease entities that affect the frontal sinus, with a special emphasis on treatment principles and surgical management. Copyright © 2016 Elsevier Inc. All rights reserved.

Teaching Intracultural and Intercultural Communication: A Critique and Suggested Method.

ERIC Educational Resources Information Center

DeVoss, Danielle; Jasken, Julia; Hayden, Dawn

2002-01-01

Summarizes recent literature about the importance of paying attention to intercultural communication. Analyzes the productive approaches in popular business and technical communication textbooks. Presents five challenges for business and technical communication teachers to consider. Includes teaching modules that address these challenges. Notes…

Health innovation for patient safety improvement.

PubMed

Sellappans, Renukha; Chua, Siew Siang; Tajuddin, Nur Amani Ahmad; Mei Lai, Pauline Siew

2013-01-01

Medication error has been identified as a major factor affecting patient safety. Many innovative efforts such as Computerised Physician Order Entry (CPOE), a Pharmacy Information System, automated dispensing machines and Point of Administration Systems have been carried out with the aim of improving medication safety. However, areas remain that require urgent attention. One main area will be the lack of continuity of care due to the breakdown of communication between multiple healthcare providers. Solutions may include consideration of "health smart cards" that carry vital patient medical information in the form of a "credit card" or use of the Malaysian identification card. However, costs and technical aspects associated with the implementation of this health smart card will be a significant barrier. Security and confidentiality, on the other hand, are expected to be of primary concern to patients. Challenges associated with the implementation of a health smart card might include physician buy-in for use in his or her everyday practice. Training and technical support should also be available to ensure the smooth implementation of this system. Despite these challenges, implementation of a health smart card moves us closer to seamless care in our country, thereby increasing the productivity and quality of healthcare.

Chemical and technical challenges in the analysis of central carbon metabolites by liquid-chromatography mass spectrometry.

PubMed

Siegel, David; Permentier, Hjalmar; Reijngoud, Dirk-Jan; Bischoff, Rainer

2014-09-01

This review deals with chemical and technical challenges in the analysis of small-molecule metabolites involved in central carbon and energy metabolism via liquid-chromatography mass-spectrometry (LC-MS). The covered analytes belong to the prominent pathways in biochemical carbon oxidation such as glycolysis or the tricarboxylic acid cycle and, for the most part, share unfavorable properties such as a high polarity, chemical instability or metal-affinity. The topic is introduced by selected examples on successful applications of metabolomics in the clinic. In the core part of the paper, the structural features of important analyte classes such as nucleotides, coenzyme A thioesters or carboxylic acids are linked to "problematic hotspots" along the analytical chain (sample preparation and-storage, separation and detection). We discuss these hotspots from a chemical point of view, covering issues such as analyte degradation or interactions with metals and other matrix components. Based on this understanding we propose solutions wherever available. A major notion derived from these considerations is that comprehensive carbon metabolomics inevitably requires multiple, complementary analytical approaches covering different chemical classes of metabolites. Copyright © 2013 Elsevier B.V. All rights reserved.

Advancing the field of 3D biomaterial printing.

PubMed

Jakus, Adam E; Rutz, Alexandra L; Shah, Ramille N

2016-01-11

3D biomaterial printing has emerged as a potentially revolutionary technology, promising to transform both research and medical therapeutics. Although there has been recent progress in the field, on-demand fabrication of functional and transplantable tissues and organs is still a distant reality. To advance to this point, there are two major technical challenges that must be overcome. The first is expanding upon the limited variety of available 3D printable biomaterials (biomaterial inks), which currently do not adequately represent the physical, chemical, and biological complexity and diversity of tissues and organs within the human body. Newly developed biomaterial inks and the resulting 3D printed constructs must meet numerous interdependent requirements, including those that lead to optimal printing, structural, and biological outcomes. The second challenge is developing and implementing comprehensive biomaterial ink and printed structure characterization combined with in vitro and in vivo tissue- and organ-specific evaluation. This perspective outlines considerations for addressing these technical hurdles that, once overcome, will facilitate rapid advancement of 3D biomaterial printing as an indispensable tool for both investigating complex tissue and organ morphogenesis and for developing functional devices for a variety of diagnostic and regenerative medicine applications.

DOE Office of Scientific and Technical Information (OSTI.GOV)

R. Strykowsky, T. Brown, J. Chrzanowski, M. Cole, P. Heitzenroeder, G.H. Neilson, Donald Rej, and M. Viola

The National Compact Stellarator Experiment (NCSX) was designed to test physics principles of an innovative fusion energy confinement device developed by the Princeton Plasma Physics Laboratory (PPPL) and Oak Ridge National Laboratory (ORNL) under contract from the US Department of Energy. The project was technically very challenging, primarily due to the complex component geometries and tight tolerances that were required. As the project matured these challenges manifested themselves in significant cost overruns through all phases of the project (i.e. design, R&D, fabrication and assembly). The project was subsequently cancelled by the DOE in 2008. Although the project was not completed,more » several major work packages, comprising about 65% of the total estimated cost (excluding management and contingency), were completed, providing a data base of actual costs that can be analyzed to understand cost drivers. Technical factors that drove costs included the complex geometry, tight tolerances, material requirements, and performance requirements. Management factors included imposed annual funding constraints that throttled project cash flow, staff availability, and inadequate R&D. Understanding how requirements and design decisions drove cost through this top-down forensic cost analysis could provide valuable insight into the configuration and design of future state-of-the art machines and other devices.« less

Missing data and technical variability in single-cell RNA-sequencing experiments.

PubMed

Hicks, Stephanie C; Townes, F William; Teng, Mingxiang; Irizarry, Rafael A

2017-11-06

Until recently, high-throughput gene expression technology, such as RNA-Sequencing (RNA-seq) required hundreds of thousands of cells to produce reliable measurements. Recent technical advances permit genome-wide gene expression measurement at the single-cell level. Single-cell RNA-Seq (scRNA-seq) is the most widely used and numerous publications are based on data produced with this technology. However, RNA-seq and scRNA-seq data are markedly different. In particular, unlike RNA-seq, the majority of reported expression levels in scRNA-seq are zeros, which could be either biologically-driven, genes not expressing RNA at the time of measurement, or technically-driven, genes expressing RNA, but not at a sufficient level to be detected by sequencing technology. Another difference is that the proportion of genes reporting the expression level to be zero varies substantially across single cells compared to RNA-seq samples. However, it remains unclear to what extent this cell-to-cell variation is being driven by technical rather than biological variation. Furthermore, while systematic errors, including batch effects, have been widely reported as a major challenge in high-throughput technologies, these issues have received minimal attention in published studies based on scRNA-seq technology. Here, we use an assessment experiment to examine data from published studies and demonstrate that systematic errors can explain a substantial percentage of observed cell-to-cell expression variability. Specifically, we present evidence that some of these reported zeros are driven by technical variation by demonstrating that scRNA-seq produces more zeros than expected and that this bias is greater for lower expressed genes. In addition, this missing data problem is exacerbated by the fact that this technical variation varies cell-to-cell. Then, we show how this technical cell-to-cell variability can be confused with novel biological results. Finally, we demonstrate and discuss how batch-effects and confounded experiments can intensify the problem. © The Author 2017. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Technical challenges involved in supporting the Lambda Point Experiment

NASA Technical Reports Server (NTRS)

Petrac, D.; Israelsson, U.; Otth, D.; Simmons, L.; Staats, J.; Thompson, A.

1990-01-01

The Lambda Point Experiment (LPE) is one of the instruments included in the U.S. Microgravity Payload Mission 1 planned for one of the Space Shuttle flights in 1992. The objective of the experiment is to measure the heat capacity of liquid helium within a narrow interval around the transition between superfluid and normal helium (the lambda point) with an unprecedented temperature resolution of about 10 to the -10th. Multiple technical challenges are presented in the areas of structural support, safety analysis, and modal frequency tests. This paper describes the technical challenges of JPL's multidisciplinary involvement in support of these experiments in microgravity.

Uganda's National Transmission Backbone Infrastructure Project: Technical Challenges and the Way Forward

NASA Astrophysics Data System (ADS)

Bulega, T.; Kyeyune, A.; Onek, P.; Sseguya, R.; Mbabazi, D.; Katwiremu, E.

2011-10-01

Several publications have identified technical challenges facing Uganda's National Transmission Backbone Infrastructure project. This research addresses the technical limitations of the National Transmission Backbone Infrastructure project, evaluates the goals of the project, and compares the results against the technical capability of the backbone. The findings of the study indicate a bandwidth deficit, which will be addressed by using dense wave division multiplexing repeaters, leasing bandwidth from private companies. Microwave links for redundancy, a Network Operation Center for operation and maintenance, and deployment of wireless interoperability for microwave access as a last-mile solution are also suggested.

Lessons learned from the manufacture of the W7-X planar coils

NASA Astrophysics Data System (ADS)

Viebke, H.; Gustke, D.; Rummel, T.; Sborchia, C.; Schroeder, R.; Williams, D.; Bates, S.; Leigh, B.; Winter, R.

2006-06-01

WENDELSTEIN 7-X (W7-X) is a superconducting stellarator. The planar coils are in charge to modify the magnetic filed configuration of the W7-X. The major challenges during manufacturing were the fabrication of the cable-in-conduit conductor, the accuracy of the coil cases after welding and machining and the development of electrical joints with a resistance below 1 nΩ. Leaks were detected during repetitive in the case cooling system, which were caused by stress corrosion cracking. High voltage tests in a reduced vacuum environment (Paschen conditions) revealed that the insulation had to be reinforced and the quench detection wires had to be exchanged. This paper gives an overview about the main technical challenges of the planar coils and the lessons learned during production.

Challenges for Insertion of Structural Nanomaterials in Aerospace Applications

NASA Technical Reports Server (NTRS)

Sochi, Emilie J.

2012-01-01

In the two decades since Iijima's report on carbon nanotubes (CNT), there has been great interest in realizing the benefits of mechanical properties observed at the nanoscale in large-scale structures. The weight savings possible due to dramatic improvements in mechanical properties relative to state-of-the-art material systems can be game changing for applications like aerospace vehicles. While there has been significant progress in commercial production of CNTs, major aerospace applications that take advantage of properties offered by this material have yet to be realized. This paper provides a perspective on the technical challenges and barriers for insertion of CNTs as an emerging material technology in aerospace applications and proposes approaches that may reduce the typical timeframe for technology maturation and insertion into aerospace structures.

TB control: challenges and opportunities for India.

PubMed

Pai, Madhukar; Daftary, Amrita; Satyanarayana, Srinath

2016-03-01

India's TB control programme has treated over 19 million patients, but the incidence of TB continues to be high. TB is a major killer and drug-resistant TB is a growing threat. There are several likely reasons, including social conditions and co-morbidities that fuel the TB epidemic: under-investment by the government, weak programme implementation and management, suboptimal quality of care in the private sector, and insufficient advocacy around TB. Fortunately, India possesses the technical know-how, competence and resources to address these challenges. The End TB Strategy by WHO offers India an excellent blueprint to advance the agenda of TB control. © The Author 2016. Published by Oxford University Press on behalf of Royal Society of Tropical Medicine and Hygiene. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Technical trends of large-size photomasks for flat panel displays

NASA Astrophysics Data System (ADS)

Yoshida, Koichiro

2017-06-01

Currently, flat panel displays (FPDs) are one of the main parts for information technology devices and sets. From 1990's to 2000's, liquid crystal displays (LCDs) and plasma displays had been mainstream FPDs. In the middle of 2000's, demand of plasma displays declined and organic light emitting diodes (OLEDs) newly came into FPD market. And today, major technology of FPDs are LCDs and OLEDs. Especially for mobile devices, the penetration of OLEDs is remarkable. In FPDs panel production, photolithography is the key technology as same as LSI. Photomasks for FPDs are used not only as original master of circuit pattern, but also as a tool to form other functional structures of FPDs. Photomasks for FPDs are called as "Large Size Photomasks(LSPMs)", since the remarkable feature is " Size" which reaches over 1- meter square and over 100kg. In this report, we discuss three LSPMs technical topics with FPDs technical transition and trend. The first topics is upsizing of LSPMs, the second is the challenge for higher resolution patterning, and the last is "Multi-Tone Mask" for "Half -Tone Exposure".

Introduction and historical perspective.

PubMed

Gunning, Peter

2008-01-01

Tropomyosin is a coiled coil dimer which forms a polymer along the major groove of the majority of actin filaments. It is therefore one of the two primary components of the actin filament. Our understanding of the biological function of tropomyosin has been driven almost entirely by its role in striated muscle. This reflects both its original discovery as part of the thin filament in skeletal muscle and its pivotal role in regulating muscle contraction. In contrast, its role in the function of the cytoskeleton of all cells has been poorly understood due, at least in part, to the technical challenge of deciphering the function of a large number of isoforms. This book has brought together many of the leading researchers who have defined the function of tropomyosin in both normal and pathological conditions. Each author brings their own perspective in a series of stand alone reviews of the areas of tropomyosin research they have played a major role in defining.

Technical documentation challenges in aviation maintenance : a proceedings report.

DOT National Transportation Integrated Search

2012-11-01

The 2012 Technical Documentation workshop addressed both problems and solutions associated with technical : documentation for maintenance. These issues are known to cause errors, rework, maintenance delays, other : safety hazards, and FAA administrat...

Chemical Sensors Based on Metal Oxide Nanostructures

NASA Technical Reports Server (NTRS)

Hunter, Gary W.; Xu, Jennifer C.; Evans, Laura J.; VanderWal, Randy L.; Berger, Gordon M.; Kulis, Mike J.; Liu, Chung-Chiun

2006-01-01

This paper is an overview of sensor development based on metal oxide nanostructures. While nanostructures such as nanorods show significan t potential as enabling materials for chemical sensors, a number of s ignificant technical challenges remain. The major issues addressed in this work revolve around the ability to make workable sensors. This paper discusses efforts to address three technical barriers related t o the application of nanostructures into sensor systems: 1) Improving contact of the nanostructured materials with electrodes in a microse nsor structure; 2) Controling nanostructure crystallinity to allow co ntrol of the detection mechanism; and 3) Widening the range of gases that can be detected by using different nanostructured materials. It is concluded that while this work demonstrates useful tools for furt her development, these are just the beginning steps towards realizati on of repeatable, controlled sensor systems using oxide based nanostr uctures.

Elements of Engineering Excellence

NASA Technical Reports Server (NTRS)

Blair, J. C.; Ryan, R. S.; Schutzenhofer

2012-01-01

The inspiration for this Contract Report (CR) originated in discussions with the director of Marshall Space Flight Center (MSFC) Engineering who asked that we investigate the question: "How do you achieve excellence in aerospace engineering?" Engineering a space system is a complex activity. Avoiding its inherent potential pitfalls and achieving a successful product is a challenge. This CR presents one approach to answering the question of how to achieve Engineering Excellence. We first investigated the root causes of NASA major failures as a basis for developing a proposed answer to the question of Excellence. The following discussions integrate a triad of Technical Understanding and Execution, Partnership with the Project, and Individual and Organizational Culture. The thesis is that you must focus on the whole process and its underlying culture, not just on the technical aspects. In addition to the engineering process, emphasis is given to the need and characteristics of a Learning Organization as a mechanism for changing the culture.

Quantitative techniques for musculoskeletal MRI at 7 Tesla.

PubMed

Bangerter, Neal K; Taylor, Meredith D; Tarbox, Grayson J; Palmer, Antony J; Park, Daniel J

2016-12-01

Whole-body 7 Tesla MRI scanners have been approved solely for research since they appeared on the market over 10 years ago, but may soon be approved for selected clinical neurological and musculoskeletal applications in both the EU and the United States. There has been considerable research work on musculoskeletal applications at 7 Tesla over the past decade, including techniques for ultra-high resolution morphological imaging, 3D T2 and T2* mapping, ultra-short TE applications, diffusion tensor imaging of cartilage, and several techniques for assessing proteoglycan content in cartilage. Most of this work has been done in the knee or other extremities, due to technical difficulties associated with scanning areas such as the hip and torso at 7 Tesla. In this manuscript, we first provide some technical context for 7 Tesla imaging, including challenges and potential advantages. We then review the major quantitative MRI techniques being applied to musculoskeletal applications on 7 Tesla whole-body systems.

Establishing an online continuing and professional development library for nurses and midwives in east, central, and southern Africa

PubMed Central

Hosey, Kristen N.; Kalula, Alphonce; Voss, Joachim

2016-01-01

Over the previous 4 years, the African Health Profession Regulatory Collaborative for nurses and midwives has supported 12 countries to establish national continuing and professional development frameworks and programs, linking continuing education to nursing and midwifery re-licensure through technical assistance and improvement grants. However, lack of electronic media and rural practice sites, differences in priority content, and varying legal frameworks make providing accessible, certifiable, and up-to-date online continuing education content for the more than 300,000 nurses and midwives in the 17 member countries of the East, Central, and Southern Africa College of Nursing a major challenge. We report here on how the East, Central, and Southern Africa College of Nursing, with technical assistance from an Afya Bora Fellow, developed an online continuing professional development library hosted on their Website using data collected in a survey of nursing and midwifery leaders in the region. PMID:27086190

Tactical and operational response to major incidents: feasibility and reliability of skills assessment using novel virtual environments.

PubMed

Cohen, Daniel; Sevdalis, Nick; Patel, Vishal; Taylor, Michael; Lee, Henry; Vokes, Mick; Heys, Mick; Taylor, David; Batrick, Nicola; Darzi, Ara

2013-07-01

To determine feasibility and reliability of skills assessment in a multi-agency, triple-site major incident response exercise carried out in a virtual world environment. Skills assessment was carried out across three scenarios. The pre-hospital scenario required paramedics to triage and treat casualties at the site of an explosion. Technical skills assessment forms were developed using training syllabus competencies and national guidelines identified by pre-hospital response experts. Non-technical skills were assessed using a seven-point scale previously developed for use by pre-hospital paramedics. The two in-hospital scenarios, focusing on a trauma team leader and a silver/clinical major incident co-ordinator, utilised the validated Trauma-NOTECHS scale to assess five domains of performance. Technical competencies were assessed using an ATLS-style competency scale for the trauma scenario. For the silver scenario, the assessment document was developed using competencies described from a similar role description in a real-life hospital major incident plan. The technical and non-technical performance of all participants was assessed live by two experts in each of the three scenarios and inter-assessor reliability was computed. Participants also self-assessed their performance using identical proformas immediately after the scenarios were completed. Self and expert assessments were correlated (assessment cross-validation). Twenty-three participants underwent all scenarios and assessments. Performance assessments were feasible for both experts as well as the participants. Non-technical performance was generally scored higher than technical performance. Very good inter-rater reliability was obtained between expert raters across all scenarios and both technical and non-technical aspects of performance (reliability range 0.59-0.90, Ps<0.01). Significant positive correlations were found between self and expert assessment in technical skills across all three scenarios (correlation range 0.52-0.84, Ps<0.05), although no such correlations were observed in non-technical skills. This study establishes feasibility and reliability of virtual environment technical and non-technical skills assessment in major incident scenarios for the first time. The development for further scenarios and validated assessment scales will enable major incident planners to utilise virtual technologies for improved major incident preparation and training. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Transsphenoidal surgery in patients with acromegaly: operative strategies for overcoming technically challenging anatomical variations.

PubMed

Zada, Gabriel; Cavallo, Luigi M; Esposito, Felice; Fernandez-Jimenez, Julio Cesar; Tasiou, Anastasia; De Angelis, Michelangelo; Cafiero, Tullio; Cappabianca, Paolo; Laws, Edward R

2010-10-01

In addition to difficulties with anesthetic and medical management, transsphenoidal operations in patients with longstanding acromegaly are associated with inherent intraoperative challenges because of anatomical variations that occur frequently in these patients. The object of this study was to review the overall safety profile and anatomical/technical challenges associated with transsphenoidal surgery in patients with acromegaly. The authors performed a retrospective analysis of 169 patients who underwent endoscopic transsphenoidal operations for growth hormone-secreting adenomas to assess the incidence of surgical complications. A review of frequently occurring anatomical challenges and operative strategies employed during each phase of the operation to address these particular issues was performed. Of 169 cases reviewed, there was no perioperative mortality. Internal carotid artery injury occurred in 1 patient (0.6%) with complex sinus anatomy, who remained neurologically intact following endovascular unilateral carotid artery occlusion. Other complications included: significant postoperative epistaxis (5 patients [3%]), transient diabetes insipidus (5 patients [3%]), delayed symptomatic hyponatremia (4 patients [2%]), CSF leak (2 patients [1%]), and pancreatitis (1 patient [0.6%]). Preoperative considerations in patients with acromegaly should include a cardiopulmonary evaluation and planning regarding intubation and other aspects of the anesthetic technique. During the nasal phase of the transsphenoidal operation, primary challenges include maintaining adequate visualization and hemostasis, which is frequently compromised by redundant, edematous nasal mucosa and bony hypertrophy of the septum and the nasal turbinates. During the sphenoid phase, adequate bony removal, optimization of working space, and correlation of imaging studies to intraoperative anatomy are major priorities. The sellar phase is frequently challenged by increased sellar floor thickness, distinct patterns of tumor extension and bony invasion, and anatomical variations in the caliber and course of the internal carotid artery. Specific operative techniques for addressing each of these intraoperative challenges are discussed. Transsphenoidal surgery in patients with longstanding acromegaly frequently poses greater challenges than operations for other types of sellar lesions, yet these challenges may be safely and effectively overcome with the anticipation of specific issues and implementation of various intraoperative techniques.

Antenna Electronics Concept for the Next-Generation Very Large Array

NASA Astrophysics Data System (ADS)

Beasley, Anthony J.; Jackson, Jim; Selina, Robert

2017-01-01

The National Radio Astronomy Observatory (NRAO), in collaboration with its international partners, completed two major projects over the past decade: the sensitivity upgrade for the Karl Jansky Very Large Array (VLA) and the construction of the Atacama Large Millimeter/Sub-Millimeter Array (ALMA). The NRAO is now considering the scientific potential and technical feasibility of a next-generation VLA (ngVLA) with an emphasis on thermal imaging at milli-arcsecond resolution. The preliminary goals for the ngVLA are to increase both the system sensitivity and angular resolution of the VLA tenfold and to cover a frequency range of 1.2-116 GHz.A number of key technical challenges have been identified for the project. These include cost-effective antenna manufacturing (in the hundreds), suitable wide-band feed and receiver designs, broad-band data transmission, and large-N correlators. Minimizing the overall operations cost is also a fundamental design requirement.The designs of the antenna electronics, reference distribution system, and data transmission system are anticipated to be major construction and operations cost drivers for the facility. The electronics must achieve a high level of performance, while maintaining low operation and maintenance costs and a high level of reliability. Additionally, due to the uncertainty in the feasibility of wideband receivers, advancements in digitizer technology, and budget constraints, the hardware system architecture should be scalable to the number of receiver bands and the speed and resolution of available digitizers.Here, we present the projected performance requirements of the ngVLA, a proposed block diagram for the instrument’s electronics systems, parameter tradeoffs within the system specifications, and areas of technical risk where technical advances may be required for successful production and installation.

Accomplishments and challenges of surgical simulation.

PubMed

Satava, R M

2001-03-01

For nearly a decade, advanced computer technologies have created extraordinary educational tools using three-dimensional (3D) visualization and virtual reality. Pioneering efforts in surgical simulation with these tools have resulted in a first generation of simulators for surgical technical skills. Accomplishments include simulations with 3D models of anatomy for practice of surgical tasks, initial assessment of student performance in technical skills, and awareness by professional societies of potential in surgical education and certification. However, enormous challenges remain, which include improvement of technical fidelity, standardization of accurate metrics for performance evaluation, integration of simulators into a robust educational curriculum, stringent evaluation of simulators for effectiveness and value added to surgical training, determination of simulation application to certification of surgical technical skills, and a business model to implement and disseminate simulation successfully throughout the medical education community. This review looks at the historical progress of surgical simulators, their accomplishments, and the challenges that remain.

Machinery health prognostics: A systematic review from data acquisition to RUL prediction

NASA Astrophysics Data System (ADS)

Lei, Yaguo; Li, Naipeng; Guo, Liang; Li, Ningbo; Yan, Tao; Lin, Jing

2018-05-01

Machinery prognostics is one of the major tasks in condition based maintenance (CBM), which aims to predict the remaining useful life (RUL) of machinery based on condition information. A machinery prognostic program generally consists of four technical processes, i.e., data acquisition, health indicator (HI) construction, health stage (HS) division, and RUL prediction. Over recent years, a significant amount of research work has been undertaken in each of the four processes. And much literature has made an excellent overview on the last process, i.e., RUL prediction. However, there has not been a systematic review that covers the four technical processes comprehensively. To fill this gap, this paper provides a review on machinery prognostics following its whole program, i.e., from data acquisition to RUL prediction. First, in data acquisition, several prognostic datasets widely used in academic literature are introduced systematically. Then, commonly used HI construction approaches and metrics are discussed. After that, the HS division process is summarized by introducing its major tasks and existing approaches. Afterwards, the advancements of RUL prediction are reviewed including the popular approaches and metrics. Finally, the paper provides discussions on current situation, upcoming challenges as well as possible future trends for researchers in this field.

Integrating Technical Communication in the Mechanical Engineering Curriculum

NASA Astrophysics Data System (ADS)

Norberg, Seth; Ashcraft, Timothy; van Poppel, Bret

2017-11-01

Technical communication is essential to engineering practice, but these skills can be challenging to teach and assess in the classroom. Instructors in the Mechanical Engineering (ME) program at the United States Military Academy are developing new learning exercises to prepare students for success in their capstone design course and beyond. In this paper we highlight the recent successes and lessons learned from two courses: junior-level Thermal-Fluid Systems and the senior-level ME Seminar. Both courses support the newly implemented West Point Writing Program (WPWP), an institutional, writing-across-the-curriculum program. The junior course incorporates four hands-on experiments, which provide an abundance of data for students to analyze, assess, and present. In the senior course the majority of the content that students present is from their ongoing capstone design projects. Between the two courses, students craft essays, lab reports, short summaries, posters, quad charts, and technical presentations. Both courses include peer evaluation, revision exercises, and timed (on demand) writing assignments. The junior course includes assignments co-authored by a group as well as an individual report. An overview of both courses' assignments with course-end feedback from the students and the faculty is provided. Strengths and weaknesses are identified and recommendations for instructors seeking to implement similar technical communications assignments in their own courses are presented.

ASF: Facing the Challenges for 15 Years and Counting

NASA Astrophysics Data System (ADS)

La Belle-Hamer, N.; Nicoll, J.; Atwood, D.; Arko, S.

2006-12-01

The Alaska Satellite Facility (ASF) of the Geophysical Institute, University of Alaska Fairbanks, has just celebrated its 15th year of experience in satellite remote sensing. ASF is involved in a wide range of activities - - from downlinking satellite data to developing data analysis tools, value-added products, and training for Synthetic Aperture Radar (SAR) users. Satellite remote sensing data are acquired, processed, analyzed, and archived by ASF from several satellites; ASF has built expertise in handling and manipulating the data, SAR in particular. SAR is the only satellite imagery in the world today that can be acquired at any time of the day or night and during adverse weather conditions. It can be used to develop value-added products to aid in global climate change research. Examples include the SAR-derived coastal winds in the Gulf of Alaska and Bering Sea; monitoring of the major ice shelves in the Arctic and Antarctic; and examining the impact on sea level from the Greenland ice sheets and glaciers. The challenges facing the use of remote-sensing data in climate change research can be divided into three major categories: economical, political, and technical. The expense of designing, building, and launching a satellite is substantial. The costs of the ground segment including data management can be substantial and should not be neglected. The US agency funding climate often has the research community pushing for new missions against declining federal budgets in direct competition with ongoing missions. On the political front, data policy, data ownership, and cost recovery are issues often perceived as insurmountable by the user community. The technical issues, while challenging, are often the easiest to solve. The Japan Aerospace Exploration Agency, with the successful launch of the Advanced Land Observing System (ALOS), has embarked on a new way of handling the ground segment with the introduction of international data nodes. ASF will serve with NOAA as the Americas ALOS Data Node. With the success of the ALOS data node structure, it may well be that international cooperation will become the standard method for overcoming the challenges of global climate change research.

Soil fertility status and challenges in Burundi: an overview

NASA Astrophysics Data System (ADS)

Kaboneka, Salvator

2015-04-01

Landlocked and thousands miles away from international sea ports, Burundi is one of the poorest country in the world. 58% of the population suffers chronic malnutrition, 67% live in absolute poverty (MDG report 2012). 90% of the estimated 10 million people depends on subsistence agriculture, on about 3 million ha of cultivable land. The average size of a family farm is less than 0.5 ha which has to support a family of typically 7 people . As a consequence, fallow practices are no longer possible and continuous land cultivation leads to enormous soil losses by erosion. As much as 100-200 metric tons per hectare of soil losses have been reported on the hill sides of the Mumirwa region, whose landscape is currently so degraded that the local community now say that "stones grow" in the zone. In medium to high altitude areas, about 1 million of ha are acidic (pH < 5) with a high risk of Al toxicity and deficiencies in major (P, Ca, Mg, K) and micro-nutrients (Cu, Zn). Some parts of the low land of the Imbo zone, dedicated to rice cultivation, manifest indications of salinity. A recent survey showed that 14% of the 2.800 ha of land committed to rice production is affected by rising salinity. Although soil salinity constitutes a challenge to rice producers in that region, soil acidity, often combined with Al toxicity, is the major limitation to soil productivity throughout Burundi. Almuminum saturation up to 60% and pH as low as 4.5 are observed. As elsewhere, technical solutions do exist, but the level of poverty of the population is such that access to fertilizers and adoption of sustainable practices is very weak. We believe that the main challenge to soil productivity in Burundi is more socio-economic than technical, and farmers should be helped with simple tools that should be linked to their indigenous knowledge about soil fertility. Sustainable management of soil fertility is the key challenge for farmers to optimize a sustainable yield. Key words: micro nutrient, soil fertility, nutrient depletion, soil acidity.

Space Fence PDR Concept Development Phase

NASA Astrophysics Data System (ADS)

Haines, L.; Phu, P.

2011-09-01

The Space Fence, a major Air Force acquisition program, will become the dominant low-earth orbit uncued sensor in the space surveillance network (SSN). Its primary objective is to provide a 24/7 un-cued capability to find, fix, and track small objects in low earth orbit to include emerging and evolving threats, as well as the rapidly growing population of orbital debris. Composed of up to two geographically dispersed large-scale S-band phased array radars, this new system-of-systems concept will provide comprehensive Space Situational Awareness through net-centric operations and integrated decision support. Additionally, this program will facilitate cost saving force structure changes in the SSN, specifically including the decommissioning of very-high frequency VHF Air Force Space Surveillance System (AFSSS). The Space Fence Program Office entered a Preliminary Design Review (PDR) concept development phase in January 2011 to achieve the delivery of the Initial Operational Capability (IOC) expected in FY17. Two contractors were awarded to perform preliminary system design, conduct radar performance analyses and evaluations, and develop a functional PDR radar system prototype. The key objectives for the Phase A PDR effort are to reduce Space Fence total program technical, cost, schedule, and performance risk. The overall program objective is to achieve a preliminary design that demonstrates sufficient technical and manufacturing maturity and that represents a low risk, affordable approach to meet the Space Fence Technical Requirements Document (TRD) requirements for the final development and production phase to begin in 3QFY12. This paper provides an overview of the revised Space Fence program acquisition strategy for the Phase-A PDR phase to IOC, the overall program milestones and major technical efforts. In addition, the key system trade studies and modeling/simulation efforts undertaken during the System Design Requirement (SDR) phase to address and mitigate technical challenges of the Space Fence System will also be discussed. Examples include radar system optimization studies, modeling and simulation for system performance assessment, investigation of innovative Astrodynamics algorithms for initial orbit determination and observation correlation.

Challenges and Opportunities: Two Weeks of Teaching Technical Communication at Suzhou University, China.

ERIC Educational Resources Information Center

Ding, Daniel; Jablonski, John

2001-01-01

Relates the authors' experience teaching technical writing for two weeks at Suzhou University in China. Discusses activities; examines four technical writing textbooks purchased there; and offers suggestions about how technical communication might be established as a separate academic discipline in Chinese universities. Discusses technical…

Technical and Vocational Education in Nigeria: Issues, Challenges and a Way Forward

ERIC Educational Resources Information Center

Okoye, Reko; Arimonu, Maxwell Onyenwe

2016-01-01

Technical education, as enshrined in the Nigerian national policy on education, is concerned with qualitative technological human resources development directed towards a national pool of skilled and self reliant craftsmen, technicians and technologists in technical and vocational education fields. In Nigeria, the training of technical personnel…

NASA's Space Launch System Transitions From Design To Production

NASA Technical Reports Server (NTRS)

Askins, Bruce R.; Robinson, Kimberly F.

2016-01-01

NASA's Space Launch System (SLS) successfully completed its Critical Design Review (CDR) in 2015, a major milestone on the journey to an unprecedented era of exploration for humanity. CDR formally marked the program's transition from design to production phase just four years after the program's inception and the first such milestone for a human launch vehicle in 40 years. While challenges typical of a complex development program lie ahead, CDR evaluators concluded that the design is technically and programmatically sound and ready to press forward to Design Certification Review (DCR) and readiness for launch of Exploration Mission 1 (EM-1) in the 2018 timeframe. SLS is prudently based on existing propulsion systems, infrastructure and knowledge with a clear, evolutionary path as required by mission needs. In its initial configuration, designated Block 1, SLS will a minimum of 70 metric tons (t) (154,324 pounds) of payload to low Earth orbit (LEO). It will evolve to a 130 t (286,601 pound) payload capacity by upgrading its engines, boosters, and upper stage, dramatically increasing the mass and volume of human and robotic exploration while decreasing mission risk, increasing safety, and simplifying ground and mission operations. CDR was the central programmatic accomplishment among many technical accomplishments that will be described in this paper. The government/industry SLS team successfully test-fired a flight-like five-segment solid rocket motor, as well as seven hotfire development tests of the RS-25 core stage engine. The majority of the major test article and flight barrels, rings, and domes for the core stage liquid oxygen, liquid hydrogen, engine section, intertank, and forward skirt were manufactured at NASA's Michoud Assembly Facility in New Orleans, Louisiana. Renovations to the B-2 test stand for stage green run testing were completed at NASA's Stennis Space Center (SSC), near Bay St. Louis, Mississippi. Core stage test stands are reaching completion at NASA's Marshall Space Flight Center in Huntsville, Alabama. The modified Pegasus barge for core stage transportation from manufacturing to testing and launch sites was delivered to SSC. The Interim Cryogenic Propulsion System test article was also completed. This paper will discuss these and other technical and programmatic successes and challenges over the past year and provide a preview of work ahead before the first flight of this new capability.

Iridium: failures & successes

NASA Astrophysics Data System (ADS)

Christensen, CarissaBryce; Beard, Suzette

2001-03-01

This paper will provide an overview of the Iridium business venture in terms of the challenges faced, the successes achieved, and the causes of the ultimate failure of the venture — bankruptcy and system de-orbit. The paper will address technical, business, and policy issues. The intent of the paper is to provide a balanced and accurate overview of the Iridium experience, to aid future decision-making by policy makers, the business community, and technical experts. Key topics will include the history of the program, the objectives and decision-making of Motorola, the market research and analysis conducted, partnering strategies and their impact, consumer equipment availability, and technical issues — target performance, performance achieved, technical accomplishments, and expected and unexpected technical challenges. The paper will use as sources trade media and business articles on the Iridium program, technical papers and conference presentations, Wall Street analyst's reports, and, where possible, interviews with participants and close observers.

NASA's Pursuit of Low-Noise Propulsion for Low-Boom Commercial Supersonic Vehicles

NASA Technical Reports Server (NTRS)

Bridges, James; Brown, Clifford A.; Seidel, Jonathan A.

2018-01-01

Since 2006, when the Fundamental Aeronautics Program was instituted within NASA's Aeronautics Mission Directorate, there has been a Project looking at the technical barriers to commercial supersonic flight. Among the barriers is the noise produced by aircraft during landing and takeoff. Over the years that followed, research was carried out at NASA aeronautics research centers, often in collaboration with academia and industry, addressing the problem. In 2013, a high-level milestone was established, described as a Technical Challenge, with the objective of demonstrating the feasibility of a low-boom supersonic airliner that could meet current airport noise regulations. The Technical Challenge was formally called "Low Noise Propulsion for Low Boom Aircraft", and was completed in late 2016. This paper reports the technical findings from this Technical Challenge, reaching back almost 10 years to review the technologies and tools that were developed along the way. It also discusses the final aircraft configuration and propulsion systems required for a supersonic civilian aircraft to meet noise regulations using the technologies available today. Finally, the paper documents the model-scale tests that validated the acoustic performance of the study aircraft.

NASA's Pursuit of Low-Noise Propulsion for Low-Boom Commercial Supersonic Vehicles

NASA Technical Reports Server (NTRS)

Bridges, James; Brown, Clifford A.; Seidel, Jonathan

2018-01-01

Since 2006, when the Fundamental Aeronautics Program was instituted within NASA's Aeronautics Mission Directorate, there has been a Project looking at the technical barriers to commercial supersonic flight. Among the barriers is the noise produced by aircraft during landing and takeoff. Over the years that followed, research was carried out at NASA aeronautics research centers, often in collaboration with academia and industry, addressing the problem. In 2013, a high-level milestone was established, described as a Technical Challenge, with the objective of demonstrating the feasibility of a low-boom supersonic airliner that could meet current airport noise regulations. The Technical Challenge was formally called a Low Noise Propulsion for Low Boom Aircraft and was completed in late 2016. This paper reports the technical findings from this Technical Challenge, reaching back almost 10 years to review the technologies and tools that were developed along the way. It also discusses the final aircraft configuration and propulsion systems required for a supersonic civilian aircraft to meet noise regulations using the technologies available today. Finally, the paper documents the model-scale tests that validated the acoustic performance of the study aircraft.

Challenge theme 6: Natural hazard risks in the Borderlands: Chapter 8 in United States-Mexican Borderlands: Facing tomorrow's challenges through USGS science

USGS Publications Warehouse

Page, William R.; Parcher, Jean W.; Stefanov, Jim

2013-01-01

Natural hazards such as earthquakes, landslides and debris flows, wildfires, hurricanes, and intense storm-induced flash floods threaten communities to varying degrees all along the United States–Mexican border. The U.S. Geological Survey (USGS) collaborates with Federal, State, and local agencies to minimize the effects of natural hazards by providing timely, unbiased science information to emergency response officials, resource managers, and the public to help reduce property damage, injury, and loss of life. The USGS often mobilizes response efforts during and after a natural hazard event to provide technical and scientific counsel on recovery and response, and it has a long history of deploying emergency response teams to major disasters in both domestic and international locations. This chapter describes the challenges of natural hazards in the United States–Mexican border region and the capabilities of the USGS in the fields of hazard research, monitoring, and assessment, as well as preventative mitigation and post-disaster response.

Digital Pharmacovigilance and Disease Surveillance: Combining Traditional and Big-Data Systems for Better Public Health.

PubMed

Salathé, Marcel

2016-12-01

The digital revolution has contributed to very large data sets (ie, big data) relevant for public health. The two major data sources are electronic health records from traditional health systems and patient-generated data. As the two data sources have complementary strengths-high veracity in the data from traditional sources and high velocity and variety in patient-generated data-they can be combined to build more-robust public health systems. However, they also have unique challenges. Patient-generated data in particular are often completely unstructured and highly context dependent, posing essentially a machine-learning challenge. Some recent examples from infectious disease surveillance and adverse drug event monitoring demonstrate that the technical challenges can be solved. Despite these advances, the problem of verification remains, and unless traditional and digital epidemiologic approaches are combined, these data sources will be constrained by their intrinsic limits. © The Author 2016. Published by Oxford University Press for the Infectious Diseases Society of America.

Development of the first infrared satellite observatory

NASA Technical Reports Server (NTRS)

Smith, G. M.; Squibb, G. F.

1984-01-01

A development history is given for the Infrared Astronomical Satelite (IRAS), whose primary mission objective is an unbiased, all-sky survey in the 8-120 micron wavelength range. A point source catalog of more than 200,000 IR sources, to be published later this year, represents the accomplishment of this objective. IRAS has also conducted 10,000 pointed observations of specific objects. Attention is given to the cost increases and schedule slips which resulted from the substantial technical challenges of IRAS hardware and software development, and to the management techniques which had to be employed in this major international project.

Science, technology and the future of small autonomous drones.

PubMed

Floreano, Dario; Wood, Robert J

2015-05-28

We are witnessing the advent of a new era of robots - drones - that can autonomously fly in natural and man-made environments. These robots, often associated with defence applications, could have a major impact on civilian tasks, including transportation, communication, agriculture, disaster mitigation and environment preservation. Autonomous flight in confined spaces presents great scientific and technical challenges owing to the energetic cost of staying airborne and to the perceptual intelligence required to negotiate complex environments. We identify scientific and technological advances that are expected to translate, within appropriate regulatory frameworks, into pervasive use of autonomous drones for civilian applications.

Management in biophotonics and biotechnologies

NASA Astrophysics Data System (ADS)

Meglinski, I. V.; Tuchin, V. V.

2005-10-01

Biophotonics, one of the most exciting and rapidly growing areas, offers vast potential for changing traditional approaches to meeting many critical needs in medicine, biology, pharmacy, food, health care and cosmetic industries. Follow the market trends we developed new MSc course Management in Biophotonics and Biotechnologies (MBB) that provide students of technical disciplines with the necessary training, education and problem-solving skills to produce professionals and managers who are better equipped to handle the challenges of modern science and business in biophotonics and biotechnology. A major advantage of the course is that it provides skills not currently available to graduates in other Master programs.

Double-double bend achromat cell upgrade at the Diamond Light Source: From design to commissioning

NASA Astrophysics Data System (ADS)

Bartolini, R.; Abraham, C.; Apollonio, M.; Bailey, C. P.; Cox, M. P.; Day, A.; Fielder, R. T.; Hammond, N. P.; Heron, M. T.; Holdsworth, R.; Kay, J.; Martin, I. P. S.; Mhaskar, S.; Miller, A.; Pulampong, T.; Rehm, G.; Rial, E. C. M.; Rose, A.; Shahveh, A.; Singh, B.; Thomson, A.; Walker, R. P.

2018-05-01

Diamond has recently successfully commissioned a major change in the lattice consisting of the substitution of a standard double-bend achromat (DBA) cell with a modified four-bend achromat (4BA) cell called "double-double bend achromat" (DDBA). This work stems from the original studies initiated in 2012 towards a Diamond upgrade and provides the benefit of an additional straight section in the ring available for insertion devices. This paper reviews the DDBA design and layout, the implications for technical subsystems, the associated engineering challenges and the main results of the commissioning completed in April 2017.

Research Update: The materials genome initiative: Data sharing and the impact of collaborative ab initio databases

DOE PAGES

Jain, Anubhav; Persson, Kristin A.; Ceder, Gerbrand

2016-03-24

Materials innovations enable new technological capabilities and drive major societal advancements but have historically required long and costly development cycles. The Materials Genome Initiative (MGI) aims to greatly reduce this time and cost. Here, we focus on data reuse in the MGI and, in particular, discuss the impact of three different computational databases based on density functional theory methods to the research community. Finally, we discuss and provide recommendations on technical aspects of data reuse, outline remaining fundamental challenges, and present an outlook on the future of MGI's vision of data sharing.

The Systems Autonomy Demonstration Project - Catalyst for Space Station advanced automation

NASA Technical Reports Server (NTRS)

Healey, Kathleen J.

1988-01-01

The Systems Autonomy Demonstration Project (SADP) was initiated by NASA to address the advanced automation needs for the Space Station program. The application of advanced automation to the Space Station's operations management system (OMS) is discussed. The SADP's future goals and objectives are discussed with respect to OMS functional requirements, design, and desired evolutionary capabilities. Major technical challenges facing the designers, developers, and users of the OMS are identified in order to guide the definition of objectives, plans, and scenarios for future SADP demonstrations, and to focus the efforts on the supporting research.

Laser induced forward transfer of graphene

NASA Astrophysics Data System (ADS)

Smits, Edsger C. P.; Walter, Arnaud; de Leeuw, Dago M.; Asadi, Kamal

2017-10-01

Transfer of graphene and other two-dimensional materials is still a technical challenge. The 2D-materials are typically patterned after transfer, which leads to a major loss of material. Here, we present laser induced forward transfer of chemical vapor deposition grown graphene layers with well-defined shapes and geometries. The transfer is based on photo-decomposition of a triazene-based transfer layer that produces N2 gas, which propels a graphene layer from the donor to the acceptor substrate. The functionality of the graphene-metal junction was verified by realizing functional bottom contact bottom gate field-effect transistors.

Cuba Country Analysis Brief

EIA Publications

2016-01-01

Cuba imports the majority of their energy needs, but offshore oil and gas potential could help mitigate their reliance imports. Cuba has entered into many agreements with various countries to help with exploration and drilling efforts. As a result of the ongoing U.S. trade embargo against Cuba, U.S. companies are unable to own any Cuban oil assets. However, U.S. oil companies are allowed to participate in drilling as well as sending technology and supplies with an executive license. While there is interest in Cuban offshore assets, the combination of low oil prices and technically challenging fields could be stumbling blocks for foreign investment.

The dilemma of BME research projects in developing countries: a case study.

PubMed

Zahedi, Edmond; Attar, Hamid Movahedian

2011-01-01

Researchers are faced with huge challenges when undertaking BME research projects in developing countries. Various administrative, technical, economic and even cultural barriers have to be overcome whereas the quality and quantity of the output has to be comparable with the developed world in order to make results publishable. This paper uses a real project context to highlight the major problems and the necessity of a holistic approach which would take into consideration all stakeholders interests. It is only by tackling problems such as relationship between academia-industry and administration efficiency at their root that significant progress can be achieved.

Digital media in the home: technical and research challenges

NASA Astrophysics Data System (ADS)

Ribas-Corbera, Jordi

2005-03-01

This article attempts to identify some of the technology and research challenges facing the digital media industry in the future. We first discuss several trends in the industry, such as the rapid growth of broadband Internet networks and the emergence of networking and media-capable devices in the home. Next, we present technical challenges that result from these trends, such as effective media interoperability in devices, and provide a brief overview of Windows Media, which is one of the technologies in the market attempting to address these challenges. Finally, given these trends and the state of the art, we argue that further research on data compression, encoder optimization, and multi-format transcoding can potentially make a significant technical and business impact in digital media. We also explore the reasons that research on related techniques such as wavelets or scalable video coding is having a relatively minor impact in today"s practical digital media systems.

Dilemmas and challenges for the shelter sector: lessons learned from the Sphere revision process.

PubMed

Saunders, Graham

2004-06-01

Key dilemmas and challenges for those involved in the shelter sector are described, based on issues that emerged from the extensive global consultative process undertaken to inform the revision of the Sphere handbook. The range of perspectives on the major themes is presented, with suggestions as to how these issues could be progressed. Themes include the poor definition of the sector and the lack of a consistent approach among the leading shelter actors; the absence of a common terminology; the conflict between "temporary" versus "durable" solutions; the disconnect between technical advisers and the field; the need for greater recognition of local coping strategies and the local context; the involvement of recipients and host governments in policy development; the need for better "how-to" guidance; and the limited incorporation of the emerging themes of livelihoods etc. to date.

Student-Centered and Dynamic Interfaces that Enrich Technical Learning for Online Science Learners: A Review of the Literature

ERIC Educational Resources Information Center

Killian, Susan A.; Beck, Dennis E.; O'Bryan, Corliss A.; Jarvis, Nathan; Clausen, Edgar C.; Crandall, Philip G.

2014-01-01

Communicating complex scientific and technical information presents a challenge for food science educators. The most efficient learning occurs when all senses are engaged, one reason that many educators believe that scientific principles are best taught with hands-on laboratory experiences. Today there are many challenges to the continuation of…

Introduction of Geographical Information Systems (GIS) in Technical University Education in Ghana: Challenges and the Way Forward

ERIC Educational Resources Information Center

Acquah, Prince C.; Asamoah, Jack N.; Konadu, Daniel D.

2017-01-01

Geographic Information System (GIS) continue to play very important role in improving spatial thinking skills of graduates from higher educational institutions. However, teaching and learning of GIS at the technical university level in Ghana remains very limited due to some implementation challenges. This paper reviews the implementation of GIS in…

Wireless Instrumentation Systems for Flight Testing at NASA AFRC

NASA Technical Reports Server (NTRS)

Hang, Richard

2017-01-01

NASA Armstrong Flight Research Center is revolutionizing its traditional wired instrumentation systems with wireless technologies. This effort faces many technical challenges, such as spectrum compliance, time synchronization, power distribution and airworthiness. This presentation summarizes NASA AFRC's flight test capabilities with current conventional instrumentation methodology and highlights the technical challenges of wireless systems used for flight test research applications.

76 FR 66078 - Notice of Industry Workshop on Technical and Regulatory Challenges in Deep and Ultra-Deep Outer...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-25

...-0087] Notice of Industry Workshop on Technical and Regulatory Challenges in Deep and Ultra-Deep Outer... and gas exploration and production in deep and ultra-deep OCS waters. Through this workshop, BSEE will... structured venue for consultation among offshore deepwater oil and gas industry and regulatory experts in...

Optimizing care for the obese patient in interventional radiology

PubMed Central

Aberle, Dwight; Charles, Hearns; Hodak, Steven; O’Neill, Daniel; Oklu, Rahmi; Deipolyi, Amy R.

2017-01-01

With the rising epidemic of obesity, interventional radiologists are treating increasing numbers of obese patients, as comorbidities associated with obesity preclude more invasive treatments. These patients are at heightened risk of vascular and oncologic disease, both of which often require interventional radiology care. Obese patients pose unique challenges in imaging, technical feasibility, and periprocedural monitoring. This review describes the technical and clinical challenges posed by this population, with proposed methods to mitigate these challenges and optimize care. PMID:28082253

Health situation and issues in the Seychelles in 2012.

PubMed

Bovet, P; Gédéon, J; Louange, M; Durasnel, P; Aubry, P; Gaüzère, B A

2013-11-27

Located off the coast of Kenya, the Republic of the Seychelles is an island archipelago nation whose citizens are mostly of African origin. The population, independent from the United Kingdom since 1976, has largely completed its demographic and epidemiological transitions. Major investments in infrastructure and social services have fostered a steady economic growth. Health services and education are free. The predominance of chronic non-communicable diseases and rapid aging of the population cause significant new challenges for public health and the health system. However, like the other small island states in the region, the Seychelles remains under the threat of outbreaks, particularly of arboviruses. Health indicators from 2012 are generally very good. There are concerns, however, about the future of health care in the country. Geographic isolation, the small and aging population and limited resources provide major challenges for maintaining and sustaining an effective workforce of health professionals, a constantly evolving technical platform and an increasing number of available medications. This is true particularly in view of the increasing burden of chronic diseases and the continued threat to the population of current or emerging infectious diseases. The purpose of this article is to provide a brief introduction to the geography, history, and political context of Seychelles to provide an account of the current situation regarding major diseases in the Seychelles and to review health priorities of the last few decades. To our knowledge, no comprehensive inventory of sporadic, endemic or epidemic events has been attempted before, except for a remarkable report from the 1950s [1]. Using health data from the past few decades, information from health personnel who live and practice in the Indian Ocean, we attempt to identify major current and future health challenges in the Seychelles.

Funding options for research: facing the market as well as government.

PubMed

Mitchell, G; Nossal, G

1999-06-01

Parasitology is a challenge. At one level, the structural and genetic complexities of parasites provide ample technical challenges in regard to an understanding of parasite variability and adaptability, epidemiological diversity, drug resistance, etc. The intricacies of host parasite relationships including the immunology of parasitism will continually surprise yet frustrate the vaccine developer and keep the bravest immunoparasitologist busy and creative for decades. As if the technical considerations were not challenging enough, we see difficulties arising in sustaining a research endeavour and preserving a critical mass of researchers through the generation of high-level, long-term funding support. Contributing to this situation is the fact that most parasitic diseases of major impact in humans are largely centred around the rural poor in tropical, less industrially-developed countries and therefore of little or of fickle interest to the strictly commercially oriented. Moreover, the focus in the rural industries has moved away from aspects of on-farm production with lower priority given to studies on even the 'economically-important' parasites of livestock. It is contended that this may change again with pressures and clear marketing advantages to preserving a 'clean and green' image for Australia's primary industries. Overall, the extraordinary technical and conceptual advances in recent times have been tempered by uncertainties in research funding and severe cuts from some traditional sources for both fundamental and strategic/applied research in Parasitology. Several have highlighted the fact that deliverables in terms of new methods of disease control have been sparse and some claims made in the past have certainly been exaggerated. Yet the prospects and achievements at the front end of the long R&D pathway have never been brighter. In this article we examine the merits of a 'portfolio approach' to generating research funds in Parasitology and Science and Technology in Australia more generally, with an emphasis on strategies that, through welding good science with clear, medium-term product objectives, increase research funding opportunities.

[OurPuppet - Caring support with an interactive puppet for informal caregivers : Opportunities and challenges in the social and technical developmental process].

PubMed

Kuhlmann, Andrea; Reuter, Verena; Schramek, Renate; Dimitrov, Todor; Görnig, Matthias; Matip, Eva-Maria; Matthies, Olaf; Naroska, Edwin

2018-01-01

The "OurPuppet" project comprises a sensor-based, interactive puppet that will be developed to communicate with people in need of care during a short period of absence of the informal caregiver. Specially qualified puppet guides will support the use of the new technical development. They instruct people with dementia and caregivers on how to use the puppet and supervise the (informal) care relationship through discussions on a regular basis. The article shows the specific components of users' needs for which the concrete technical development should find answers. It also focuses on the opportunities and challenges for the technical and social developmental process accompanied by these demands. The analysis of the users' needs is based on a participatory approach. Semi-structured focus group interviews were conducted with informal caregivers, nurses and volunteers in order to identify typical situations in home care settings. The interviews were paraphrased and summarized in order to deduce inductive categories (qualitative data analysis), which describe everyday situations that the technical system should address. Such analyses provide information about the needs of potential users and indicate how to design such technical systems. Furthermore, opportunities and challenges of the development process as well as important contextual information were identified.

Inter-organisational communication networks in healthcare: centralised versus decentralised approaches

PubMed Central

Pirnejad, Habibollah; Bal, Roland; Stoop, Arjen P.; Berg, Marc

2007-01-01

Background To afford efficient and high quality care, healthcare providers increasingly need to exchange patient data. The existence of a communication network amongst care providers will help them to exchange patient data more efficiently. Information and communication technology (ICT) has much potential to facilitate the development of such a communication network. Moreover, in order to offer integrated care interoperability of healthcare organizations based upon the exchanged data is of crucial importance. However, complications around such a development are beyond technical impediments. Objectives To determine the challenges and complexities involved in building an Inter-organisational Communication network (IOCN) in healthcare and the appropriations in the strategies. Case study Interviews, literature review, and document analysis were conducted to analyse the developments that have taken place toward building a countrywide electronic patient record and its challenges in The Netherlands. Due to the interrelated nature of technical and non-technical problems, a socio-technical approach was used to analyse the data and define the challenges. Results Organisational and cultural changes are necessary before technical solutions can be applied. There are organisational, financial, political, and ethicolegal challenges that have to be addressed appropriately. Two different approaches, one “centralised” and the other “decentralised” have been used by Dutch healthcare providers to adopt the necessary changes and cope with these challenges. Conclusion The best solutions in building an IOCN have to be drawn from both the centralised and the decentralised approaches. Local communication initiatives have to be supervised and supported centrally and incentives at the organisations' interest level have to be created to encourage the stakeholder organisations to adopt the necessary changes. PMID:17627296

Inter-organisational communication networks in healthcare: centralised versus decentralised approaches.

PubMed

Pirnejad, Habibollah; Bal, Roland; Stoop, Arjen P; Berg, Marc

2007-05-16

To afford efficient and high quality care, healthcare providers increasingly need to exchange patient data. The existence of a communication network amongst care providers will help them to exchange patient data more efficiently. Information and communication technology (ICT) has much potential to facilitate the development of such a communication network. Moreover, in order to offer integrated care interoperability of healthcare organizations based upon the exchanged data is of crucial importance. However, complications around such a development are beyond technical impediments. To determine the challenges and complexities involved in building an Inter-organisational Communication network (IOCN) in healthcare and the appropriations in the strategies. Interviews, literature review, and document analysis were conducted to analyse the developments that have taken place toward building a countrywide electronic patient record and its challenges in The Netherlands. Due to the interrelated nature of technical and non-technical problems, a socio-technical approach was used to analyse the data and define the challenges. Organisational and cultural changes are necessary before technical solutions can be applied. There are organisational, financial, political, and ethicolegal challenges that have to be addressed appropriately. Two different approaches, one "centralised" and the other "decentralised" have been used by Dutch healthcare providers to adopt the necessary changes and cope with these challenges. The best solutions in building an IOCN have to be drawn from both the centralised and the decentralised approaches. Local communication initiatives have to be supervised and supported centrally and incentives at the organisations' interest level have to be created to encourage the stakeholder organisations to adopt the necessary changes.

Single Cell and Metagenomic Assemblies: Biology Drives Technical Choices and Goals (Metagenomics Informatics Challenges Workshop: 10K Genomes at a Time)

ScienceCinema

Stepanauskas, Ramunas

2018-02-06

DOE JGI's Tanja Woyke, chair of the Single Cells and Metagenomes session, delivers an introduction, followed by Bigelow Laboratory's Ramunas Stepanauskas on "Single Cell and Metagenomic Assemblies: Biology Drives Technical Choices and Goals" at the Metagenomics Informatics Challenges Workshop held at the DOE JGI on October 12-13, 2011.

Challenge Study: A Project-Based Learning on a Wireless Communication System at Technical High School

ERIC Educational Resources Information Center

Terasawa, Ikuo

2016-01-01

The challenge study is a project based learning curriculum at Technical High School aimed at the construction of a wireless communication system. The first period was engineering issues in the construction of an artificial satellite and the second period was a positional locating system based on the general purpose wire-less device--ZigBee device.…

Materials education activities

NASA Technical Reports Server (NTRS)

Ries, Heidi R.; Harris, Jonice; Leake, Woodrow W.; Bunnell, L. Roy; Berrettini, Robert

1993-01-01

Last year, at NEW: Update '91, a panel discussion was held to address the unique difficulties of attracting and retaining minorities and women in technical studies. Unfortunately, retention in technical majors is a problem of varying proportions for the entire student population, and must be improved in order to maintain the strength of the nation's industrial base. To investigate the cause of student attrition in technical majors, in-depth interviews of both current and former (non-graduating) engineering students at four colleges and universities in Colorado were conducted by Hewitt and Seymour. They found that there was no significant difference in the level of high school preparation and undergraduate academic performance in these two groups, despite the prevailing faculty perception that most students who switch from technical to nontechnical majors were underprepared. The majority of engineering students who changed majors reported that they were turned off by science, while one-third complained of poor teaching.

NASA Environmentally Responsible Aviation's Highly-Loaded Front Block Compressor Demonstration

NASA Technical Reports Server (NTRS)

Celestina, Mark

2017-01-01

The ERA project was created in 2009 as part of NASAs Aeronautics Research Mission Directorates (ARMD) Integrated Systems Aviation Program (IASP). The purpose of the ERA project was to explore and document the feasibility, benefit, and technical risk of vehicles concepts and enabling technologies to reduce aviations impact on the environment. The metrics for this technology is given in Figure 1 with the N+2 metrics highlighted in green. It is anticipated that the United States air transportation system will continue to expand significantly over the next few decades thus adversely impacting the environment unless new technology is incorporated to simultaneously reduce nitrous oxides (NOx), noise and fuel consumption. In order to achieve the overall goals and meet the technology insertion challenges, these goals were divided into technical challenges that were to be achieved during the execution of the ERA project. Technical challenges were accomplished through test campaigns conducted by Integrated Technology Demonstration (ITDs). ERAs technical performance period ended in 2015.

Site Guidelines for a "Making Middle Grades Work" Technical Review Visit

ERIC Educational Resources Information Center

Southern Regional Education Board, 2004

2004-01-01

The purpose of the Technical Review Visit (TRV) is to follow up on the actions taken to implement the recommendations indicated for each challenge in the most recent Technical Assistance Visit (TAV) report. This document provides the following: (1) Site Guidelines for the Making Middle Grades Work (MMGW) Technical Review Visit; (2) Site Checklist;…

Proceedings of the Annual National Clinic on Technical Education (12th, Spokane, Washington, March 26-28, 1975). Human Resource Development: Technical Education's Challenge.

ERIC Educational Resources Information Center

Rutledge, Gene; And Others

This report includes the presentations of the speakers appearing before the National Clinic on Technical Education. Topics cover human resource development; the impact of technical education on economic development (in Mississippi); economics of allied health education; manpower implications of environmental protection; manpower needs for…

Human Resource Development: Technical Education's Challenge. Proceedings of the Annual National Clinic on Technical Education (12th, Spokane, Washington, March 26-28, 1975).

ERIC Educational Resources Information Center

Washington State Community Coll. District 17, Spokane.

Speeches and discussions are transcribed in this report, which also includes a listing of the American Technical Education Association (ATEA) committee members, exhibitors, officers, and directory of speakers. Speeches covered "Human Resource Development" by Gene Rutledge; "The Impact of Technical Education on Economic…

Describing Acupuncture: A New Challenge for Technical Communicators.

ERIC Educational Resources Information Center

Karanikas, Marianthe

1997-01-01

Considers acupuncture as an increasingly popular alternative medical therapy, but difficult to describe in technical communication. Notes that traditional Chinese medical explanations of acupuncture are unscientific, and that scientific explanations of acupuncture are inconclusive. Finds that technical communicators must translate acupuncture for…

Planning as an Iterative Process

NASA Technical Reports Server (NTRS)

Smith, David E.

2012-01-01

Activity planning for missions such as the Mars Exploration Rover mission presents many technical challenges, including oversubscription, consideration of time, concurrency, resources, preferences, and uncertainty. These challenges have all been addressed by the research community to varying degrees, but significant technical hurdles still remain. In addition, the integration of these capabilities into a single planning engine remains largely unaddressed. However, I argue that there is a deeper set of issues that needs to be considered namely the integration of planning into an iterative process that begins before the goals, objectives, and preferences are fully defined. This introduces a number of technical challenges for planning, including the ability to more naturally specify and utilize constraints on the planning process, the ability to generate multiple qualitatively different plans, and the ability to provide deep explanation of plans.

78 FR 50404 - Advanced Scientific Computing Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-19

... for the exascale challenges charge. Tentative Agenda: Agenda will include discussion of the following: Exascale Challenges Workshop and preliminary list of most critical challenges, and technical approaches to...

Delivery of high-tech home care by hospital-based nursing units in Quebec: clinical and technical challenges.

PubMed

Lehoux, Pascale; Richard, L; Pineault, R; Saint-Arnaud, J

2006-03-01

The role that hospital-based nurses should play in the delivery of high-tech home care, and how they should be supported in that role, are topics that remain understudied. Our research objective was to document how hospital-based nursing teams perceive and deal with the clinical and technical challenges associated with the provision of high-tech home care. Four home care interventions were selected: antibiotic intravenous therapy, parenteral nutrition, peritoneal dialysis and oxygen therapy. A self-administered survey was sent to all hospital-based units providing these interventions in the province of Quebec, Canada (n = 154; response rate: 70.8%). We used descriptive statistical analyses to derive mean values for scores on either a five- or a six-level Likert scale. Despite variation across the four interventions, our results indicate that while nursing teams believe these interventions increase patients' autonomy, they also recognize that they generate anxiety and impose constraints on patients' lives. Nurses must increase efforts to deal with both clinical and technical challenges and help patients overcome the barriers to appropriate use of home care technologies. While nursing teams generally perceive high-tech home care as beneficial, they still experience significant technical and clinical challenges. Some of these challenges could be addressed by strengthening professional training initiatives, while others require broader home care policy interventions.

Crowd Sourcing for Challenging Technical Problems and Business Model

NASA Technical Reports Server (NTRS)

Davis, Jeffrey R.; Richard, Elizabeth

2011-01-01

Crowd sourcing may be defined as the act of outsourcing tasks that are traditionally performed by an employee or contractor to an undefined, generally large group of people or community (a crowd) in the form of an open call. The open call may be issued by an organization wishing to find a solution to a particular problem or complete a task, or by an open innovation service provider on behalf of that organization. In 2008, the Space Life Sciences Directorate (SLSD), with the support of Wyle Integrated Science and Engineering, established and implemented pilot projects in open innovation (crowd sourcing) to determine if these new internet-based platforms could indeed find solutions to difficult technical challenges. These unsolved technical problems were converted to problem statements, also called "Challenges" or "Technical Needs" by the various open innovation service providers, and were then posted externally to seek solutions. In addition, an open call was issued internally to NASA employees Agency wide (10 Field Centers and NASA HQ) using an open innovation service provider crowd sourcing platform to post NASA challenges from each Center for the others to propose solutions). From 2008 to 2010, the SLSD issued 34 challenges, 14 externally and 20 internally. The 14 external problems or challenges were posted through three different vendors: InnoCentive, Yet2.com and TopCoder. The 20 internal challenges were conducted using the InnoCentive crowd sourcing platform designed for internal use by an organization. This platform was customized for NASA use and promoted as NASA@Work. The results were significant. Of the seven InnoCentive external challenges, two full and five partial awards were made in complex technical areas such as predicting solar flares and long-duration food packaging. Similarly, the TopCoder challenge yielded an optimization algorithm for designing a lunar medical kit. The Yet2.com challenges yielded many new industry and academic contacts in bone imaging, microbial detection and even the use of pharmaceuticals for radiation protection. The internal challenges through NASA@Work drew over 6000 participants across all NASA centers. Challenges conducted by each NASA center elicited ideas and solutions from several other NASA centers and demonstrated rapid and efficient participation from employees at multiple centers to contribute to problem solving. Finally, on January 19, 2011, the SLSD conducted a workshop on open collaboration and innovation strategies and best practices through the newly established NASA Human Health and Performance Center (NHHPC). Initial projects will be described leading to a new business model for SLSD.

Turbines, Wind Tunnels, and Teamwork: The 2017 Collegiate Wind Competition Technical Challenge

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Ten college teams put their turbines to the test at the U.S. Department of Energy’s 2017 Collegiate Wind Competition Technical Challenge, held April 20–22 at the National Wind Technology Center (NWTC). The competition showcased a wide variety of turbine designs and highlighted the competitors’ brilliance, agility, and ingenuity. College students weren’t the only future wind energy experts at the NWTC that weekend: elementary and middle school students tested their turbines—crafted creatively from materials like soda bottles and aluminum foil—in the Colorado KidWind Challenge.

Web-based technical assistance and training to promote community tobacco control policy change.

PubMed

Young, Walter F; Montgomery, Debbie; Nycum, Colleen; Burns-Martin, Lavon; Buller, David B

2006-01-01

In 1998 the tobacco industry was released of claims that provided monetary relief for states. A significant expansion of tobacco control activity in many states created a need to develop local capacity. Technical assistance and training for new and experienced staff became a significant challenge for tobacco control leadership. In Colorado, this challenge was addressed in part through the development of a technical assistance and training Web site designed for local tobacco control staff and coalition members. Researchers, technical Web site development specialists, state health agency, and state tobacco control coalition staff collaborated to develop, promote, and test the efficacy of this Web site. The work group embodied a range of skills including tobacco control, Web site technical development, marketing, training, and project management. Persistent marketing, updating of Web site content, and institutionalizing it as a principal source of information and training were key to use by community coalition members.

High-Resolution X-Ray Telescopes

NASA Technical Reports Server (NTRS)

ODell, Stephen L.; Brissenden, Roger J.; Davis, William; Elsner, Ronald F.; Elvis, Martin; Freeman, Mark; Gaetz, Terry; Gorenstein, Paul; Gubarev, Mikhail V.

2010-01-01

Fundamental needs for future x-ray telescopes: a) Sharp images => excellent angular resolution. b) High throughput => large aperture areas. Generation-X optics technical challenges: a) High resolution => precision mirrors & alignment. b) Large apertures => lots of lightweight mirrors. Innovation needed for technical readiness: a) 4 top-level error terms contribute to image size. b) There are approaches to controlling those errors. Innovation needed for manufacturing readiness. Programmatic issues are comparably challenging.

TADS and Technical Assistance.

ERIC Educational Resources Information Center

Trohanis, Pascal L.

1983-01-01

Accomplishments of the Technical Assistance Development System (TADS) are cited, current challenges (including program development, and communication and coordination) are noted, and the mission mandated for TADS is outlined. (CL)

Communicable diseases in the Eastern Mediterranean Region: prevention and control 2010-2011.

PubMed

Haq, Z; Mahjour, J; Khan, W

2013-10-01

One-third of all morbidities and mortalities in the Eastern Mediterranean Region are attributed to communicable diseases. A continued situation of war and conflict, and growing political unrest in the Region, coupled with factors such as travel and migration, and insufficient infrastructure and inadequate technical and managerial capacity ofthe programmes are the major challenges. Despite these challenges, the Region continued making progress towards the elimination of specific diseases such as lymphatic filariasis, measles, malaria, schistosomiasis and dracunculiasis during 2010-11. Coverage for vaccine-preventable diseases was enhanced. Preparedness and response to emerging (e.g. dengue fever in Pakistan and Yemen) and re-emerging (e.g. cholera in Sudan) infections was improved. The Region has continued its efforts for controlling tuberculosis and curbing HIV/AIDS. Looking ahead, the Region aims to improve surveillance and response capacities, legislation issues, coordination, bio-risk and bio-security and quality management in the coming years.

Health and Environment Linked for Information Exchange in Atlanta (HELIX-Atlanta): A Pilot Tracking System

NASA Technical Reports Server (NTRS)

Rickman, Doug; Shire, J.; Qualters, J.; Mitchell, K.; Pollard, S.; Rao, R.; Kajumba, N.; Quattrochi, D.; Estes, M., Jr.; Meyer, P.;

The Omics Revolution in Agricultural Research.

PubMed

Van Emon, Jeanette M

2016-01-13

The Agrochemicals Division cosponsored the 13th International Union of Pure and Applied Chemistry International Congress of Pesticide Chemistry held as part of the 248th National Meeting and Exposition of the American Chemical Society in San Francisco, CA, USA, August 10-14, 2014. The topic of the Congress was Crop, Environment, and Public Health Protection; Technologies for a Changing World. Over 1000 delegates participated in the Congress with interactive scientific programming in nine major topic areas including the challenges and opportunities of agricultural biotechnology. Plenary speakers addressed global issues related to the Congress theme prior to the daily technical sessions. The plenary lecture addressing the challenges and opportunities that omic technologies provide agricultural research is presented here. The plenary lecture provided the diverse audience with information on a complex subject to stimulate research ideas and provide a glimpse of the impact of omics on agricultural research.

The management of large cabling campaigns during the Long Shutdown 1 of LHC

NASA Astrophysics Data System (ADS)

Meroli, S.; Machado, S.; Formenti, F.; Frans, M.; Guillaume, J. C.; Ricci, D.

2014-03-01

The Large Hadron Collider at CERN entered into its first 18 month-long shutdown period in February 2013. During this period the entire CERN accelerator complex will undergo major consolidation and upgrade works, preparing the machines for LHC operation at nominal energy (7 TeV/beam). One of the most challenging activities concerns the cabling infrastructure (copper and optical fibre cables) serving the CERN data acquisition, networking and control systems. About 1000 kilometres of cables, distributed in different machine areas, will be installed, representing an investment of about 15 MCHF. This implies an extraordinary challenge in terms of project management, including resource and activity planning, work execution and quality control. The preparation phase of this project started well before its implementation, by defining technical solutions and setting financial plans for staff recruitment and material supply. Enhanced task coordination was further implemented by deploying selected competences to form a central support team.

The Omics Revolution in Agricultural Research

PubMed Central

2015-01-01

The Agrochemicals Division cosponsored the 13th International Union of Pure and Applied Chemistry International Congress of Pesticide Chemistry held as part of the 248th National Meeting and Exposition of the American Chemical Society in San Francisco, CA, USA, August 10–14, 2014. The topic of the Congress was Crop, Environment, and Public Health Protection; Technologies for a Changing World. Over 1000 delegates participated in the Congress with interactive scientific programming in nine major topic areas including the challenges and opportunities of agricultural biotechnology. Plenary speakers addressed global issues related to the Congress theme prior to the daily technical sessions. The plenary lecture addressing the challenges and opportunities that omic technologies provide agricultural research is presented here. The plenary lecture provided the diverse audience with information on a complex subject to stimulate research ideas and provide a glimpse of the impact of omics on agricultural research. PMID:26468989

Technical communication: Notes toward defining discipline

NASA Technical Reports Server (NTRS)

Rubens, P. M.

1981-01-01

In the field of technical communication, definitions posited in virtually any major text violate every major rule of definitions. The most popular method for defining the field is to state that technical writing is any writing that supports technology or technological activities. There is a need for a nice yardstick for measuring what "technology" is. Some ways in which the field can be defined in a tightly structured empirical way and some implications of technical communication for a humanistic education in a technological age are suggested.

United states national land cover data base development? 1992-2001 and beyond

USGS Publications Warehouse

Yang, L.

2008-01-01

An accurate, up-to-date and spatially-explicate national land cover database is required for monitoring the status and trends of the nation's terrestrial ecosystem, and for managing and conserving land resources at the national scale. With all the challenges and resources required to develop such a database, an innovative and scientifically sound planning must be in place and a partnership be formed among users from government agencies, research institutes and private sectors. In this paper, we summarize major scientific and technical issues regarding the development of the NLCD 1992 and 2001. Experiences and lessons learned from the project are documented with regard to project design, technical approaches, accuracy assessment strategy, and projecti imiplementation.Future improvements in developing next generation NLCD beyond 2001 are suggested, including: 1) enhanced satellite data preprocessing in correction of atmospheric and adjacency effect and the topographic normalization; 2) improved classification accuracy through comprehensive and consistent training data and new algorithm development; 3) multi-resolution and multi-temporal database targeting major land cover changes and land cover database updates; 4) enriched database contents by including additional biophysical parameters and/or more detailed land cover classes through synergizing multi-sensor, multi-temporal, and multi-spectral satellite data and ancillary data, and 5) transform the NLCD project into a national land cover monitoring program. ?? 2008 IEEE.

Use of technical skills and medical devices among new registered nurses: A questionnaire study.

PubMed

Ewertsson, Mona; Gustafsson, Margareta; Blomberg, Karin; Holmström, Inger K; Allvin, Renée

2015-12-01

One comprehensive part of nursing practice is performing technical skills and handling of medical equipment. This might be challenging for new registered nurses (RNs) to do in patient-safe way. The aim of this study was to describe and compare the extent to which new RNs perform various technical skills and handle medical devices in different settings, and to investigate their possibility for continued learning in this respect. A further aim was to describe their perceptions of incident reporting related to technical skills and medical devices. A cross-sectional study with descriptive and comparative design. RNs who recently graduated from a nursing programme at three Swedish universities and had worked as a RN for up to 1 year were included in the study (n=113, response rate 57%). Data were collected by means of a postal questionnaire. Half of the RNs reported that they performed several of the listed tasks every day or every week, regardless of workplace. These tasks were most frequently performed in surgical departments. The majority of the participants (76%) stated a need of continued practical training. However, less than half of them (48%) had access to a training environment. Several participants (43%) had been involved in incidents related to technical skills or medical devices, which were not always reported. Nearly a third of the participants (31%) did not use the existing guidelines when performing technical skills, and reflection on performance was uncommon. This study highlights the importance of shared responsibilities between nurse educators and health care employers to provide learning opportunities for new RNs in technical skills, to maintain patient safety. To increase the safety culture where nursing students and new RNs understand the importance of using evidence-based guidelines and taking a reflective approach in the performance of technical tasks is needed. Copyright © 2015 Elsevier Ltd. All rights reserved.

Barriers and facilitators to Electronic Medical Record (EMR) use in an urban slum.

PubMed

Jawhari, Badeia; Keenan, Louanne; Zakus, David; Ludwick, Dave; Isaac, Abraam; Saleh, Abdullah; Hayward, Robert

2016-10-01

Rapid urbanization has led to the growth of urban slums and increased healthcare burdens for vulnerable populations. Electronic Medical Records (EMRs) have the potential to improve continuity of care for slum residents, but their implementation is complicated by technical and non-technical limitations. This study sought practical insights about facilitators and barriers to EMR implementation in urban slum environments. Descriptive qualitative method was used to explore staff perceptions about a recent open-source EMR deployment in two primary care clinics in Kibera, Nairobi. Participants were interviewed using open-ended, semi-structured questions. Content analysis was used when exploring transcribed data. Three major themes - systems, software, and social considerations - emerged from content analysis, with sustainability concerns prevailing. Although participants reported many systems (e.g., power, network, Internet, hardware, interoperability) and software (e.g., data integrity, confidentiality, function) challenges, social factors (e.g., identity management, training, use incentives) appeared the most important impediments to sustainability. These findings are consistent with what others have reported, especially the importance of practical barriers to EMR deployments in resource-constrained settings. Other findings contribute unique insights about social determinants of EMR impact in slum settings, including the challenge of multiple-identity management and development of meaningful incentives to staff compliance. This study exposes front-line experiences with opportunities and shortcomings of EMR implementations in urban slum primary care clinics. Although the promise is great, there are a number of unique system, software and social challenges that EMR advocates should address before expecting sustainable EMR use in resource-constrained settings. Copyright © 2016 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

The history of head transplantation: a review.

PubMed

Lamba, Nayan; Holsgrove, Daniel; Broekman, Marike L

2016-12-01

Since the turn of the last century, the prospect of head transplantation has captured the imagination of scientists and the general public. Recently, head transplant has regained attention in popular media, as neurosurgeons have proposed performing this procedure in 2017. Given the potential impact of such a procedure, we were interested in learning the history of the technical hurdles that need to be overcome, and determine if it is even technically possible to perform such a procedure on humans today. We conducted a historical review of available literature on the technical challenges and developments of head transplantation. The many social, psychological, ethical, religious, cultural, and legal questions of head transplantation were beyond the scope of this review. Our historical review identified the following important technical considerations related to performing a head transplant: maintenance of blood flow to an isolated brain via vessel anastomosis; availability of immunosuppressive agents; spinal anastomosis and fusion following cord transfection; pain control in the recipient. Several animal studies have demonstrated success in maintaining recipient cerebral perfusion and achieving immunosuppression. However, there is currently sparse evidence in favor of successful spinal anastomosis and fusion after transection. While recent publications by an Italian group offer novel approaches to this challenge, research on this topic has been sparse and hinges on procedures performed in animal models in the 1970s. How transferrable these older methods are to the human nervous system is unclear and warrants further exploration. Our review identified several important considerations related to performing a viable head transplantation. Besides the technical challenges that remain, there are important ethical issues to consider, such as exploitation of vulnerable patients and informed consent. Thus, besides the remaining technical challenges, these ethical issues will also need to be addressed before moving these studies to the clinic.

Quantitative techniques for musculoskeletal MRI at 7 Tesla

PubMed Central

Taylor, Meredith D.; Tarbox, Grayson J.; Palmer, Antony J.; Park, Daniel J.

2016-01-01

Whole-body 7 Tesla MRI scanners have been approved solely for research since they appeared on the market over 10 years ago, but may soon be approved for selected clinical neurological and musculoskeletal applications in both the EU and the United States. There has been considerable research work on musculoskeletal applications at 7 Tesla over the past decade, including techniques for ultra-high resolution morphological imaging, 3D T2 and T2* mapping, ultra-short TE applications, diffusion tensor imaging of cartilage, and several techniques for assessing proteoglycan content in cartilage. Most of this work has been done in the knee or other extremities, due to technical difficulties associated with scanning areas such as the hip and torso at 7 Tesla. In this manuscript, we first provide some technical context for 7 Tesla imaging, including challenges and potential advantages. We then review the major quantitative MRI techniques being applied to musculoskeletal applications on 7 Tesla whole-body systems. PMID:28090448

Nuclear Energy Present and Future

NASA Astrophysics Data System (ADS)

Hutchinson, I. H.

2006-10-01

Nuclear power plants currently generate about 20% of US and 17% of world electricity, which makes nuclear the largest non-emitting energy source in current use. Concerns about global climate change have led to a remarkable transformation of attitudes towards nuclear energy. There remain key challenges that must be faced when considering expansion of its contribution. In summary they are: Economics, Safety, Waste Disposal, and Proliferation. Electricity from legacy fission plants is highly competitive with fossil, but perceived financial risks make the large capital cost fraction a key hurdle to new-construction, and costs of 2 per installed Watt electrical are currently considered only just economically attractive. Proliferation of nuclear-weapons-enabling technology is a major concern for global stability, in which fusion may have significant technical advantages over fission. But proliferation control requires a combination of both technical and political initiatives. The feasibility of supplying process heat or hydrogen from nuclear energy inspires additional research into novel reactor concepts and associated technologies. The presentation will lay out this overall context of the nuclear energy renaissance.

Gravitational wave searches using the DSN (Deep Space Network)

NASA Technical Reports Server (NTRS)

Nelson, S. J.; Armstrong, J. W.

1988-01-01

The Deep Space Network Doppler spacecraft link is currently the only method available for broadband gravitational wave searches in the 0.01 to 0.001 Hz frequency range. The DSN's role in the worldwide search for gravitational waves is described by first summarizing from the literature current theoretical estimates of gravitational wave strengths and time scales from various astrophysical sources. Current and future detection schemes for ground based and space based detectors are then discussed. Past, present, and future planned or proposed gravitational wave experiments using DSN Doppler tracking are described. Lastly, some major technical challenges to improve gravitational wave sensitivities using the DSN are discussed.

Aberrant Left Inferior Bronchial Artery Originating from the Left Gastric Artery in a Patient with Acute Massive Hemoptysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Sen, E-mail: jasfly77@vip.163.com; Sun, Xi-Wen, E-mail: xwsun@citiz.net; Yu, Dong, E-mail: yudong_mail@126.com

Massive hemoptysis is a life-threatening condition, and the major source of bleeding in this condition is the bronchial circulation. Bronchial artery embolization is a safe and effective treatment for controlling hemoptysis. However, the sites of origin of the bronchial arteries (BAs) have numerous anatomical variations, which can result in a technical challenge to identify a bleeding artery. We present a rare case of a left inferior BA that originated from the left gastric artery in a patient with recurrent massive hemoptysis caused by bronchiectasis. The aberrant BA was embolized, and hemoptysis has been controlled for 8 months.

Air traffic management as principled negotiation between intelligent agents

NASA Technical Reports Server (NTRS)

Wangermann, J. P.

1994-01-01

The major challenge facing the world's aircraft/airspace system (AAS) today is the need to provide increased capacity, while reducing delays, increasing the efficiency of flight operations, and improving safety. Technologies are emerging that should improve the performance of the system, but which could also introduce uncertainty, disputes, and inefficiency if not properly implemented. The aim of our research is to apply techniques from intelligent control theory and decision-making theory to define an Intelligent Aircraft/Airspace System (IAAS) for the year 2025. The IAAS would make effective use of the technical capabilities of all parts of the system to meet the demand for increased capacity with improved performance.

The rendez-vous of mobile sieve-element and abundant companion-cell proteins.

PubMed

De Marco, Federica; Le Hir, Rozenn; Dinant, Sylvie

2018-06-01

Thousands of sieve tube exudate proteins (STEP) have now been identified and predicted to fulfill a diversity of functions. However, most STEPs should be considered putative, since methods to collect sieve tube exudates have many technical drawbacks, and advanced functional characterization will be required to distinguish contaminant from bonafide proteins, and determine the latter's location and activity in sieve elements (SE). One major challenge is to develop new approaches to elucidate the function of these SE proteins, which in turn, is expected to shed light on intriguing aspects of SE cell biology. Copyright © 2018 Elsevier Ltd. All rights reserved.

Transoral robotic thyroid surgery

PubMed Central

Clark, James H.; Kim, Hoon Yub

2015-01-01

There is currently significant demand for minimally invasive thyroid surgery; however the majority of proposed surgical approaches necessitate a compromise between minimal tissue dissection with a visible cervical scar or extensive tissue dissection with a remote, hidden scar. The development of transoral endoscopic thyroid surgery however provides an approach which is truly minimally invasive, as it conceals the incision within the oral cavity without significantly increasing the amount of required dissection. The transoral endoscopic approach however presents multiple technical challenges, which could be overcome with the incorporation of a robotic operating system. This manuscript summarizes the literature on the feasibility and current clinical experience with transoral robotic thyroid surgery. PMID:26425456

Retention of the Native Epigenome in Purified Mammalian Chromatin

PubMed Central

Ehrensberger, Andreas H.; Franchini, Don-Marc; East, Philip; George, Roger; Matthews, Nik; Maslen, Sarah L.; Svejstrup, Jesper Q.

2015-01-01

A protocol is presented for the isolation of native mammalian chromatin as fibers of 25–250 nucleosomes under conditions that preserve the natural epigenetic signature. The material is composed almost exclusively of histones and DNA and conforms to the structure expected by electron microscopy. All sequences probed for were retained, indicating that the material is representative of the majority of the genome. DNA methylation marks and histone marks resembled the patterns observed in vivo. Importantly, nucleosome positions also remained largely unchanged, except on CpG islands, where nucleosomes were found to be unstable. The technical challenges of reconstituting biochemical reactions with native mammalian chromatin are discussed. PMID:26248330

NASA's Flexible Path for the Human Exploration

NASA Technical Reports Server (NTRS)

Soeder, James F.

2016-01-01

The idea of human exploration of Mars has been a topic in science fiction for close to a century. For the past 50 years it has been a major thrust in NASAs space mission planning. Currently, NASA is pursuing a flexible development path with the final goal to have humans on Mars. To reach Mars, new hardware will have to be developed and many technology hurdles will have to be overcome. This presentation discusses Mars and its Moons; the flexible path currently being followed; the hardware under development to support exploration; and the technical and organizational challenges that must be overcome to realize the age old dream of humans traveling to Mars.

The off-label use of the Amplatzer muscular VSD occluder for large patent ductus arteriosus: a case report and review.

PubMed

Cubeddu, Roberto J; Babin, Ivan; Inglessis, Ignacio

2014-07-01

A percutaneous approach to the closure of patent ductus arteriosus (PDA) is the preferred procedure in the majority of cases. However, there is little experience with percutaneous closure of unusually large PDA. We report the case of a 28-year-old female with moderate left ventricular dilation and pulmonary hypertension resulting from a large 16 mm PDA. Percutaneous closure was successfully performed using an off-label Amplatzer muscular ventricular septal defect occluder after intravascular ultrasound assessment. Technical challenges, including accurate assessment of defect size and device selection are exemplified along with a comprehensive overview of the available literature.

Design and Analysis of Single-Cell Sequencing Experiments.

PubMed

Grün, Dominic; van Oudenaarden, Alexander

2015-11-05

Recent advances in single-cell sequencing hold great potential for exploring biological systems with unprecedented resolution. Sequencing the genome of individual cells can reveal somatic mutations and allows the investigation of clonal dynamics. Single-cell transcriptome sequencing can elucidate the cell type composition of a sample. However, single-cell sequencing comes with major technical challenges and yields complex data output. In this Primer, we provide an overview of available methods and discuss experimental design and single-cell data analysis. We hope that these guidelines will enable a growing number of researchers to leverage the power of single-cell sequencing. Copyright © 2015 Elsevier Inc. All rights reserved.

Dedicated bifurcation stents

PubMed Central

Pillai, Ajith Ananthakrishna; Jayaraman, Balachander

2012-01-01

Bifurcation percutaneous coronary intervention (PCI) is still a difficult call for the interventionist despite advancements in the instrumentation, technical skill and the imaging modalities. With major cardiac events relate to the side-branch (SB) compromise, the concept and practice of dedicated bifurcation stents seems exciting. Several designs of such dedicated stents are currently undergoing trials. This novel concept and pristine technology offers new hope notwithstanding the fact that we need to go a long way in widespread acceptance and practice of these gadgets. Some of these designs even though looks enterprising, the mere complex delivering technique and the demanding knowledge of the exact coronary anatomy makes their routine use challenging. PMID:22572498

Establishing and Maintaining an Extensive Library of Patient-Derived Xenograft Models.

PubMed

Mattar, Marissa; McCarthy, Craig R; Kulick, Amanda R; Qeriqi, Besnik; Guzman, Sean; de Stanchina, Elisa

2018-01-01

Patient-derived xenograft (PDX) models have recently emerged as a highly desirable platform in oncology and are expected to substantially broaden the way in vivo studies are designed and executed and to reshape drug discovery programs. However, acquisition of patient-derived samples, and propagation, annotation and distribution of PDXs are complex processes that require a high degree of coordination among clinic, surgery and laboratory personnel, and are fraught with challenges that are administrative, procedural and technical. Here, we examine in detail the major aspects of this complex process and relate our experience in establishing a PDX Core Laboratory within a large academic institution.

Managing Challenges in a Multi Contractor Project

NASA Technical Reports Server (NTRS)

King, Ron

2011-01-01

The presentation provides a project description, describes the integrated product team, and review project challenges. The challenges include programmatic, technical, basic drop tests, heavy drop tests, C-17 envelope expansion, and Ares I-X.

Crowdsourcing for Challenging Technical Problems - It Works!

NASA Technical Reports Server (NTRS)

Davis, Jeffrey R.

2011-01-01

The NASA Johnson Space Center Space Life Sciences Directorate (SLSD) and Wyle Integrated Science and Engineering (Wyle) will conduct a one-day business cluster at the 62nd IAC so that IAC attendees will understand the benefits of open innovation (crowdsourcing), review successful results of conducting technical challenges in various open innovation projects, and learn how an organization can effectively deploy these new problem solving tools to innovate more efficiently and effectively. Results from both the SLSD open innovation pilot program and the open innovation workshop conducted by the NASA Human Health and Performance Center will be discussed. NHHPC members will be recruited to participate in the business cluster (see membership http://nhhpc.nasa.gov) and as IAF members. Crowdsourcing may be defined as the act of outsourcing tasks that are traditionally performed by an employee or contractor to an undefined, generally large group of people or community (a crowd) in the form of an open call. The open call may be issued by the organization wishing to find a solution to a particular problem or complete a task, or by an open innovation service provider on behalf of that organization. In 2008, the SLSD, with the support of Wyle, established and implemented pilot projects in open innovation (crowdsourcing) to determine if these new internet-based platforms could indeed find solutions to difficult technical challenges. These unsolved technical problems were converted to problem statements, called Challenges by some open innovation service providers, and were then posted externally to seek solutions to these problems. In addition, an open call was issued internally to NASA employees Agency wide (11 Field Centers and NASA HQ) using an open innovation service provider crowdsourcing platform to post NASA challenges from each Center for the others to propose solutions). From 2008 to 2010, the SLSD issued 34 challenges, 14 externally and 20 internally. The 14 external problems or challenges were posted through three different vendors: InnoCentive, yet2.com and TopCoder. The 20 internal challenges were conducted using the InnoCentive crowdsourcing platform designed for use internal to an organization and customized for NASA use, and promoted as NASA@Work. The results were significant. Of the seven InnoCentive external challenges, two full and five partial awards were made in complex technical areas such as predicting solar flares and long-duration food packaging.

Developing Technical Skill Assessments

ERIC Educational Resources Information Center

Hyslop, Alisha

2009-01-01

One of the biggest challenges facing the career and technical education (CTE) community as it works to implement the 2006 Perkins Act is responding to more rigorous requirements for reporting on CTE students' technical skill attainment. The U.S. Department of Education suggested in non-regulatory guidance that states and locals use the number of…

A Decision Support Tool to Evaluate Sources and Sinks of Nitrogen within a Watershed Framework

EPA Science Inventory

Human transformation of the nitrogen (N) cycle is causing a number of environmental and human health problems. Federal, state and local authorities focusing on management of N loadings face both technical and non-technical challenges. One technical issue is that we need a bette...

The Technical Communicator as Corporate Spokesperson: A Public Relations Primer.

ERIC Educational Resources Information Center

Troester, Rod; Warburton, Terrence L.

2001-01-01

Examines the changing role of the technical communication professional in the rapidly evolving environment of organizational life. Presents five principles that serve as an initial step in laying a foundation for the preparation of technical communicators for the challenges and opportunities awaiting in contemporary organizations and the…

Design requirements, challenges, and solutions for high-temperature falling particle receivers

NASA Astrophysics Data System (ADS)

Christian, Joshua; Ho, Clifford

2016-05-01

Falling particle receivers (FPR) utilize small particles as a heat collecting medium within a cavity receiver structure. Previous analysis for FPR systems include computational fluid dynamics (CFD), analytical evaluations, and experiments to determine the feasibility and achievability of this CSP technology. Sandia National Laboratories has fabricated and tested a 1 MWth FPR that consists of a cavity receiver, top hopper, bottom hopper, support structure, particle elevator, flux target, and instrumentation. Design requirements and inherent challenges were addressed to enable continuous operation of flowing particles under high-flux conditions and particle temperatures over 700 °C. Challenges include being able to withstand extremely high temperatures (up to 1200°C on the walls of the cavity), maintaining particle flow and conveyance, measuring temperatures and mass flow rates, filtering out debris, protecting components from direct flux spillage, and measuring irradiance in the cavity. Each of the major components of the system is separated into design requirements, associated challenges and corresponding solutions. The intent is to provide industry and researchers with lessons learned to avoid pitfalls and technical problems encountered during the development of Sandia's prototype particle receiver system at the National Solar Thermal Test Facility (NSTTF).

A Qualitative Study of the Job Challenges of Instructional Deans in the Technical College System of Georgia

ERIC Educational Resources Information Center

Alford, Perrin J.

2014-01-01

The Technical College System of Georgia serves the people and the state by creating a system of technical education whose purpose is to use the latest technology and easy access for all adult Georgians and corporate citizens. Within each technical college is a hierarchy of faculty, staff, and administrators. The instructional deans serve a vital…

Barriers and Facilitators to Implementing a Change Initiative in Long-Term Care Using the INTERACT® Quality Improvement Program.

PubMed

Tappen, Ruth M; Wolf, David G; Rahemi, Zahra; Engstrom, Gabriella; Rojido, Carolina; Shutes, Jill M; Ouslander, Joseph G

Implementation of major organizational change initiatives presents a challenge for long-term care leadership. Implementation of the INTERACT® (Interventions to Reduce Acute Care Transfers) quality improvement program, designed to improve the management of acute changes in condition and reduce unnecessary emergency department visits and hospitalizations of nursing home residents, serves as an example to illustrate the facilitators and barriers to major change in long-term care. As part of a larger study of the impact of INTERACT® on rates of emergency department visits and hospitalizations, staff of 71 nursing homes were called monthly to follow-up on their progress and discuss successful facilitating strategies and any challenges and barriers they encountered during the yearlong implementation period. Themes related to barriers and facilitators were identified. Six major barriers to implementation were identified: the magnitude and complexity of the change (35%), instability of facility leadership (27%), competing demands (40%), stakeholder resistance (49%), scarce resources (86%), and technical problems (31%). Six facilitating strategies were also reported: organization-wide involvement (68%), leadership support (41%), use of administrative authority (14%), adequate training (66%), persistence and oversight on the part of the champion (73%), and unfolding positive results (14%). Successful introduction of a complex change such as the INTERACT® quality improvement program in a long-term care facility requires attention to the facilitators and barriers identified in this report from those at the frontline.

1996 DOE technical standards program workshop: Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-07-01

The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOEmore » representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.« less

Pervasive mobile healthcare systems for chronic disease monitoring.

PubMed

Huzooree, Geshwaree; Kumar Khedo, Kavi; Joonas, Noorjehan

2017-05-01

Pervasive mobile healthcare system has the potential to improve healthcare and the quality of life of chronic disease patients through continuous monitoring. Recently, many articles related to pervasive mobile healthcare system focusing on health monitoring using wireless technologies have been published. The main aim of this review is to evaluate the state-of-the-art pervasive mobile healthcare systems to identify major technical requirements and design challenges associated with the realization of a pervasive mobile healthcare system. A systematic literature review was conducted over IEEE Xplore Digital Library to evaluate 20 pervasive mobile healthcare systems out of 683 articles from 2011 to 2016. The classification of the pervasive mobile healthcare systems and other important factors are discussed. Potential opportunities and challenges are pointed out for the further deployment of effective pervasive mobile healthcare systems. This article helps researchers in health informatics to have a holistic view toward understanding pervasive mobile healthcare systems and points out new technological trends and design challenges that researchers have to consider when designing such systems for better adoption, usability, and seamless integration.

Progress and challenges: implementation and use of health information technology among critical-access hospitals.

PubMed

Gabriel, Meghan Hufstader; Jones, Emily B; Samy, Leila; King, Jennifer

2014-07-01

Despite major national investments to support the adoption of health information technology (IT), concerns persist that barriers are inhibiting that adoption and the use of advanced health IT capabilities in rural areas in particular. Using a survey of Medicare-certified critical-access hospitals, we examined electronic health record (EHR) adoption, key EHR functionalities, telehealth, and teleradiology, as well as challenges to EHR adoption. In 2013, 89 percent of critical-access hospitals had implemented a full or partial EHR. Adoption of key EHR capabilities varied. Critical-access hospitals that had certain types of technical assistance and resources available to support health IT were more likely to have adopted health IT capabilities and less likely to report significant challenges to EHR implementation and use, compared to other hospitals in the survey. It is important to ensure that the necessary resources and support are available to critical-access hospitals, especially those that operate independently, to assist them in adopting health IT and becoming able to electronically link to the broader health care system. Project HOPE—The People-to-People Health Foundation, Inc.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rittmann, Bruce; Krajmalnik‐Brown, Rosa; Zevin, Alexander

The grandest challenge facing human society today is providing large amounts of energy and industrial chemicals that are renewable and carbon-neutral. An outstanding opportunity lies in employing photosynthetic microorganisms, which have the potential to generate energy and chemical feedstock from sunlight and CO 2 at rates 10 to 100 times greater than plants. Major challenges for solar-powered production using photosynthetic microorganisms are associated with the harvesting and downstream processing of biomass to yield the usable energy or material feedstock e.g. The technical challenges and costs of downstream processing could be avoided if, powered by solar energy, the photosynthetic microorganisms weremore » to convert CO 2 directly to the desired product, which they release for direct harvesting. This approach creates a true photosynthetic factory, our goal for Photosynthetic Factory Direct! Our team is able to genetically modify the cyanobacterium Synechocystis sp. PCC 6803 so that it produces and excretes a range of renewable energy and chemical products directly from CO 2 and sunlight. Essential to realizing the potential of the photosynthetic factory is an engineered Advanced Photobioreactor (APBR) for reliable synthesis and harvest of the products.« less

Technical Assistance Project Map | State, Local, and Tribal Governments |

Science.gov Websites

), NREL provides research to help stakeholders understand challenges and barriers to the development of offers various types of technical assistance to state and local governments. Clear All Filter by: State (0) All states Year (0) All years Type (0) All types Category (0) All categories Technical Assistance

Integrated bioleaching of copper metal from waste printed circuit board-a comprehensive review of approaches and challenges.

PubMed

Awasthi, Abhishek Kumar; Zeng, Xianlai; Li, Jinhui

2016-11-01

Waste electrical and electronic equipment (e-waste) is the most rapidly growing waste stream in the world, and the majority of the residues are openly disposed of in developing countries. Waste printed circuit boards (WPCBs) make up the major portion of e-waste, and their informal recycling can cause environmental pollution and health risks. Furthermore, the conventional disposal and recycling techniques-mechanical treatments used to recover valuable metals, including copper-are not sustainable in the long term. Chemical leaching is rapid and efficient but causes secondary pollution. Bioleaching is a promising approach, eco-friendly and economically feasible, but it is slower process. This review considers the recycling potential of microbes and suggests an integrated bioleaching approach for Cu extraction and recovery from WPCBs. The proposed recycling system should be more effective, efficient and both technically and economically feasible.

Challenges Faced by Female-Students in Engineering-Education

ERIC Educational Resources Information Center

Madara, Diana Starovoytova; Cherotich, Sharon

2016-01-01

Gender-related challenges in learning technical courses are universal phenomenon. These challenges could restrain female students from achieving their fullest potential. The main focus of this study, therefore, is to examine self-recognized challenges faced by undergraduate female students in pursuing engineering at the School of Engineering…

The Use of Dynamic Stochastic Social Behavior Models to Produce Likelihood Functions for Risk Modeling of Proliferation and Terrorist Attacks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Young, Jonathan; Thompson, Sandra E.; Brothers, Alan J.

The ability to estimate the likelihood of future events based on current and historical data is essential to the decision making process of many government agencies. Successful predictions related to terror events and characterizing the risks will support development of options for countering these events. The predictive tasks involve both technical and social component models. The social components have presented a particularly difficult challenge. This paper outlines some technical considerations of this modeling activity. Both data and predictions associated with the technical and social models will likely be known with differing certainties or accuracies – a critical challenge is linkingmore » across these model domains while respecting this fundamental difference in certainty level. This paper will describe the technical approach being taken to develop the social model and identification of the significant interfaces between the technical and social modeling in the context of analysis of diversion of nuclear material.« less

Analytical Components of the Benefits and Costs of the Clean Air Act 1990-2020, the Second Prospective Study

EPA Pesticide Factsheets

The major analytical components of the Second Prospective Study are shown on this page. For other major components of the study, supporting technical reports are available which provide additional technical information.

Supervised normalization of microarrays

PubMed Central

Mecham, Brigham H.; Nelson, Peter S.; Storey, John D.

2010-01-01

Motivation: A major challenge in utilizing microarray technologies to measure nucleic acid abundances is ‘normalization’, the goal of which is to separate biologically meaningful signal from other confounding sources of signal, often due to unavoidable technical factors. It is intuitively clear that true biological signal and confounding factors need to be simultaneously considered when performing normalization. However, the most popular normalization approaches do not utilize what is known about the study, both in terms of the biological variables of interest and the known technical factors in the study, such as batch or array processing date. Results: We show here that failing to include all study-specific biological and technical variables when performing normalization leads to biased downstream analyses. We propose a general normalization framework that fits a study-specific model employing every known variable that is relevant to the expression study. The proposed method is generally applicable to the full range of existing probe designs, as well as to both single-channel and dual-channel arrays. We show through real and simulated examples that the method has favorable operating characteristics in comparison to some of the most highly used normalization methods. Availability: An R package called snm implementing the methodology will be made available from Bioconductor (http://bioconductor.org). Contact: jstorey@princeton.edu Supplementary information: Supplementary data are available at Bioinformatics online. PMID:20363728

Climate Change and Water Infrastructure in Central Asia: adaptation capacities and institutional challenges

NASA Astrophysics Data System (ADS)

Abdullaev, Iskandar; Rakhmatullaev, Shavkat

2014-05-01

The paper discusses vulnerability areas of water sector in arid Central Asia due to climate change projections with particular focus on adaptation to sustainable operation of physical infrastructure capacities (from legal, institutional and technical aspects). Two types of technical installations are the main focus of this paper, i.e., electrical lift irrigation systems and water reservoirs. The first set of electrical lift infrastructure is strategic for delivering water to water users via pumps, diversion structures, vertical drainage facilities and groundwater boreholes; on the other hand, the primarily task of second set of structures is to accumulate the water resources for sectors of economy. In Central Asia, approximately, 20-50% of irrigation water is lifted, yet major of lift structures are in very poor technical conditions coupled with ever increasing of electricity tariffs. Furthermore, useful volumes capacities of water reservoirs are being severely diminished due to bio-physical geomorphologic processes, improper operational regimes and chronic financing for special in-house sedimentation surveys. Most importantly, the key argument is that irrigation sector should internalize its adaptation efforts, i.e., integrate renewable energy technologies, energy audit programs and lastly design comprehensive investment prioritization processes and programs. Otherwise, water sector will be at great risk for continued provision of fundamental services to the public, food security and industry

Technical support and delegation to practice staff - status quo and (possible) future perspectives for primary health care in Germany.

PubMed

Urban, Elisabeth; Ose, Dominik; Joos, Stefanie; Szecsenyi, Joachim; Miksch, Antje

2012-08-01

Primary health care in industrialized countries faces major challenges due to demographic changes, an increasing prevalence of chronic diseases and a shortage of primary care physicians. One approach to counteract these developments might be to reduce primary care physicians' workload supported by the use of health information technology (HIT) and non-physician practice staff. In 2009, the U.S. Commonwealth Fund (CWF) conducted an international survey of primary care physicians which the present secondary descriptive analysis is based on. The aim of this analysis was twofold: First, to explore to what extend German primary care physicians already get support by HIT and non-physician practice staff, and second, to show possible future perspectives. The CWF questionnaire was sent to a representative random sample of 1,500 primary care physicians all over Germany. The data was descriptively analyzed. Group comparisons regarding differences in gender and age groups were made by means of Chi Square Tests for categorical variables. An alpha-level of p < 0.05 was used for statistical significance. Altogether 715 primary care physicians answered the questionnaire (response rate 49%). Seventy percent of the physicians use electronic medical records. Technical features such as electronic ordering and access to laboratory parameters are mainly used. However, the majority does not routinely use technical functions for drug prescribing, reminder-systems for guideline-based interventions or recall of patients. Six percent of surveyed physicians are able to transfer prescriptions electronically to a pharmacy, 1% use email communication with patients regularly. Seventy-two percent of primary care physicians get support by non-physician practice staff in patient care, mostly in administrative tasks or routine preventive services. One fourth of physicians is supported in telephone calls to the patient or in patient education and counseling. Within this sample the majority of primary care physicians get support by HIT and non-physician practice staff in their daily work. However, the potential has not yet been fully used. Supportive technical functions like electronic alarm functions for medication or electronic prescribing should be improved technically and more adapted to physicians' needs. To warrant pro-active health care, recall and reminder systems should get refined to encourage their use. Adequately qualified non-physician practice staff could play a more active role in patient care. Reimbursement should not only be linked to doctors', but also to non-physician practice staff services.

Finance Program, Technical Assistance Brief 1

DOT National Transportation Integrated Search

1993-01-01

This four page pamphlet highlights the work of the Federal Transit : Administration's Office of Technical Assistance and Safety. Articles in this : issue are: Transit's Finance Challenge, which discusses the three main aspects : of the Office's Finan...

Assessment of Technical Skills Competence in the Operating Room: A Systematic and Scoping Review.

PubMed

Fahim, Christine; Wagner, Natalie; Nousiainen, Markku T; Sonnadara, Ranil

2018-05-01

While academic accreditation bodies continue to promote competency-based medical education (CBME), the feasibility of conducting regular CBME assessments remains challenging. The purpose of this study was to identify evidence pertaining to the practical application of assessments that aim to measure technical competence for surgical trainees in a nonsimulated, operative setting. In August 2016, the authors systematically searched Medline, Embase, and the Cochrane Database of Systematic Reviews for English-language, peer-reviewed articles published in or after 1996. The title, abstract, and full text of identified articles were screened. Data regarding study characteristics, psychometric and measurement properties, implementation of assessment, competency definitions, and faculty training were extracted. The findings from the systematic review were supplemented by a scoping review to identify key strategies related to faculty uptake and implementation of CBME assessments. A total of 32 studies were included. The majority of studies reported reasonable scores of interrater reliability and internal consistency. Seven articles identified minimum scores required to establish competence. Twenty-five articles mentioned faculty training. Many of the faculty training interventions focused on timely completion of assessments or scale calibration. There are a number of diverse tools used to assess competence for intraoperative technical skills and a lack of consensus regarding the definition of technical competence within and across surgical specialties. Further work is required to identify when and how often trainees should be assessed and to identify strategies to train faculty to ensure timely and accurate assessment.

The Apollo Experience Lessons Learned for Constellation Lunar Dust Management

NASA Technical Reports Server (NTRS)

Wagner, Sandra

2008-01-01

In 2008, NASA was embarking on its Exploration Vision, knowing that many technical challenges would be encountered. For lunar exploration missions, one challenge was to learn to manage lunar dust. References to problems associated with lunar dust during the Apollo Program were found on many of pages of the mission reports and technical debriefs. All engineers designing hardware that would come into contact with lunar dust had to mitigate its effects in the design.

Quality Career/Technical Programs Prepare Students to Succeed in a New, More Challenging Economy

ERIC Educational Resources Information Center

Southern Regional Education Board (SREB), 2008

2008-01-01

Quality career/technical education and its role in school improvement was a primary theme of the 2008 "High Schools That Work" ("HSTW") Staff Development Conference. This newsletter covers crucial topics in quality CTE (career and technical education), including assessing the quality and effectiveness of CT programs, preparing students to succeed…

Strategic Management for Competitive Advantage: A Case Study of Higher Technical and Vocational Education in Taiwan

ERIC Educational Resources Information Center

Huang, Hsun-I; Lee, Cheng-Fei

2012-01-01

Higher technical and vocational education institutions in Taiwan face the pressure of an oversupply of student places and fierce competition from domestic and international institutions. To cope with these challenges, higher technical and vocational education institutions that are better equipped to respond to market requirements are expected to…

Critical evaluation of the EU-technical guidance on shelf-life studies for L. monocytogenes on RTE-foods: a case study for smoked salmon.

PubMed

Vermeulen, A; Devlieghere, F; De Loy-Hendrickx, A; Uyttendaele, M

2011-01-31

In November 2008, a technical guidance document on the challenge test protocol was published by the EU CRL (Community of Reference Laboratory) for L. monocytogenes. This document describes the practical aspects on the execution of a challenge test in order to comply to the EU Commission regulation N° 2073/2005 on microbiological criteria for foodstuff. In this guideline two approaches are specified. On the one hand challenge tests, based on actual data measurements at the beginning and end of the shelf-life of products stored under reasonably foreseen T-profile, are described. On the other hand, growth potential is calculated by predictive models using a validated maximum specific growth rate. The present study evaluates the two above mentioned approaches on cold smoked salmon, a typical risk product for L. monocytogenes. The focus is on: (i) the relative importance of intrabatch versus interbatch variability, (ii) the concept of a simple challenge test based on actual data at start and end of shelf life versus a modelling approach and (iii) the interpretation of challenge tests. Next to this, available tertiary models were used to estimate the growth potential of these products based on their initial physicochemical characteristics. From the results it could be concluded that in some batches considerable intrabatch variability was obtained. In general, however, the interbatch variability was significantly higher than intrabatch variability. Concerning the two above mentioned methods for challenge tests, it can be stated that the first approach (simple challenge test) can be set up rather rapidly and is cost-effective for SMEs (small and medium enterprises) but provides only a single isolated outcome. This implies that challenge tests should be redone if changes occur in composition or production process. The second (modelling) approach, using extended challenge tests to establish growth parameters needs larger set ups and more complicated data analysis, which makes them more expensive. Using available tertiary models has the major advantage that the most important intrinsic and extrinsic factors can be included for the prediction of the growth parameter. It was clear that product specific models, taking into account the interaction effects with background flora, performed the best. Regarding the challenge tests, it can be concluded that the best approach to choose will depend on the particular context as in the end both approaches will lead to the same conclusion. Copyright © 2010 Elsevier B.V. All rights reserved.

A Comparison of Robotically Assisted Microsurgery versus Manual Microsurgery in Challenging Situations.

PubMed

Willems, Joost I P; Shin, Alexandra M; Shin, Delaney M; Bishop, Allen T; Shin, Alexander Y

2016-04-01

Microsurgery can be challenging secondary to orientation of the vessels, accessibility, or depth of the wound. Robotically assisted microsurgery reduces tremors and improves visualization and may improve the quality of anastomosis compared with traditional microsurgery. The purpose of this study was to compare robotically assisted microsurgery to traditional microsurgery in technically challenging situations with respect to time of anastomosis, quality of anastomosis, and Objective Structured Assessment of Technical Skills. Two investigators with no prior surgery or microsurgery experience performed 160 anastomoses on artificial microvessels after undergoing standardized traditional and robotically assisted microsurgery courses. Five different exposure groups were created with depths of 0, 10, and 20 cm and sidewall angles of 20 and 30 degrees. A comparison of 80 manual with 80 robotically assisted microsurgery anastomoses in different exposure groups was undertaken. The modified Objective Structured Assessment of Technical Skills scoring system, duration per anastomosis, and a subjective comfort scale were evaluated. In the most difficult exposure, Objective Structured Assessment of Technical Skills scores were similar in both groups (p = 0.98), the duration was higher in the manual group (p = 0.004), and the subjective comfort rating was higher in the robotically assisted microsurgery group (p < 0.001). In the easiest (0-cm depth, flat) exposure, Objective Structured Assessment of Technical Skills scores were higher in the manual group (p = 0.018) and the duration was longer in the robotically assisted microsurgery group (p = 0.008). Manual surgery was superior to robotically assisted microsurgery in technically easy exposures. In difficult exposures (greater depth and lower sidewall angles), however, robotically assisted microsurgery had a shorter surgery time and a higher comfort rating, with Objective Structured Assessment of Technical Skills scores similar to those assessing traditional microsurgery. Therapeutic, V.

An analysis of the technical status of high level radioactive waste and spent fuel management systems

NASA Technical Reports Server (NTRS)

English, T.; Miller, C.; Bullard, E.; Campbell, R.; Chockie, A.; Divita, E.; Douthitt, C.; Edelson, E.; Lees, L.

1977-01-01

The technical status of the old U.S. mailine program for high level radioactive nuclear waste management, and the newly-developing program for disposal of unreprocessed spent fuel was assessed. The method of long term containment for both of these waste forms is considered to be deep geologic isolation in bedded salt. Each major component of both waste management systems is analyzed in terms of its scientific feasibility, technical achievability and engineering achievability. The resulting matrix leads to a systematic identification of major unresolved technical or scientific questions and/or gaps in these programs.

PET/MRI – Technical Review

PubMed Central

Muzic, Raymond F.; DiFilippo, Frank P.

2015-01-01

PET/MR is a hybrid imaging technology with the potential to combine the molecular and functional information of PET with the soft-tissue contrast of MR. Herein we review the technical features and challenges of putting these different technologies together. We emphasize the conceptual to make the material accessible to a wide audience. We begin by reviewing PET/CT, a more mature multi-modality imaging technology, to provide a basis for comparison to the history of PET/MR development. We discuss the motivation and challenges of PET/MR and different approaches that have been used to meet the challenges. We conclude with a speculation about the future of this exciting imaging method. PMID:25497909

Case-based medical informatics

PubMed Central

Pantazi, Stefan V; Arocha, José F; Moehr, Jochen R

2004-01-01

Background The "applied" nature distinguishes applied sciences from theoretical sciences. To emphasize this distinction, we begin with a general, meta-level overview of the scientific endeavor. We introduce the knowledge spectrum and four interconnected modalities of knowledge. In addition to the traditional differentiation between implicit and explicit knowledge we outline the concepts of general and individual knowledge. We connect general knowledge with the "frame problem," a fundamental issue of artificial intelligence, and individual knowledge with another important paradigm of artificial intelligence, case-based reasoning, a method of individual knowledge processing that aims at solving new problems based on the solutions to similar past problems. We outline the fundamental differences between Medical Informatics and theoretical sciences and propose that Medical Informatics research should advance individual knowledge processing (case-based reasoning) and that natural language processing research is an important step towards this goal that may have ethical implications for patient-centered health medicine. Discussion We focus on fundamental aspects of decision-making, which connect human expertise with individual knowledge processing. We continue with a knowledge spectrum perspective on biomedical knowledge and conclude that case-based reasoning is the paradigm that can advance towards personalized healthcare and that can enable the education of patients and providers. We center the discussion on formal methods of knowledge representation around the frame problem. We propose a context-dependent view on the notion of "meaning" and advocate the need for case-based reasoning research and natural language processing. In the context of memory based knowledge processing, pattern recognition, comparison and analogy-making, we conclude that while humans seem to naturally support the case-based reasoning paradigm (memory of past experiences of problem-solving and powerful case matching mechanisms), technical solutions are challenging. Finally, we discuss the major challenges for a technical solution: case record comprehensiveness, organization of information on similarity principles, development of pattern recognition and solving ethical issues. Summary Medical Informatics is an applied science that should be committed to advancing patient-centered medicine through individual knowledge processing. Case-based reasoning is the technical solution that enables a continuous individual knowledge processing and could be applied providing that challenges and ethical issues arising are addressed appropriately. PMID:15533257

Biological research survey for the efficient conversion of biomass to biofuels.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kent, Michael Stuart; Andrews, Katherine M.

2007-01-01

The purpose of this four-week late start LDRD was to assess the current status of science and technology with regard to the production of biofuels. The main focus was on production of biodiesel from nonpetroleum sources, mainly vegetable oils and algae, and production of bioethanol from lignocellulosic biomass. One goal was to assess the major technological hurdles for economic production of biofuels for these two approaches. Another goal was to compare the challenges and potential benefits of the two approaches. A third goal was to determine areas of research where Sandia's unique technical capabilities can have a particularly strong impactmore » in these technologies.« less

Development of a high resolution liquid xenon imaging chamber for gamma-ray astronomy

NASA Technical Reports Server (NTRS)

Aprile, Elena

1991-01-01

The objective was to develop the technology of liquid xenon (LXe) detectors for spectroscopy and imaging of gamma rays from astrophysical sources emitting in the low to medium energy regime. In particular, the technical challenges and the physical processes relevant to the realization of the LXe detector operated as a Time Projection Chamber (TPC) were addressed and studied. Experimental results were obtained on the following topics: (1) long distance drift of free electrons in LXe (purity); (2) scintillation light yield for electrons and alphas in LXe (triggering); and (3) ionization yield for electrons and gamma rays in LXe (energy resolution). The major results from the investigations are summarized.

Photolithographic surface micromachining of polydimethylsiloxane (PDMS).

PubMed

Chen, Weiqiang; Lam, Raymond H W; Fu, Jianping

2012-01-21

A major technical hurdle in microfluidics is the difficulty in achieving high fidelity lithographic patterning on polydimethylsiloxane (PDMS). Here, we report a simple yet highly precise and repeatable PDMS surface micromachining method using direct photolithography followed by reactive ion etching (RIE). Our method to achieve surface patterning of PDMS applied an O(2) plasma treatment to PDMS to activate its surface to overcome the challenge of poor photoresist adhesion on PDMS for photolithography. Our photolithographic PDMS surface micromachining technique is compatible with conventional soft lithography techniques and other silicon-based surface and bulk micromachining methods. To illustrate the general application of our method, we demonstrated fabrication of large microfiltration membranes and free-standing beam structures in PDMS.

Photolithographic surface micromachining of polydimethylsiloxane (PDMS)

PubMed Central

Chen, Weiqiang; Lam, Raymond H. W.

2014-01-01

A major technical hurdle in microfluidics is the difficulty in achieving high fidelity lithographic patterning on polydimethylsiloxane (PDMS). Here, we report a simple yet highly precise and repeatable PDMS surface micromachining method using direct photolithography followed by reactive ion etching (RIE). Our method to achieve surface patterning of PDMS applied an O2 plasma treatment to PDMS to activate its surface to overcome the challenge of poor photoresist adhesion on PDMS for photolithography. Our photolithographic PDMS surface micromachining technique is compatible with conventional soft lithography techniques and other silicon-based surface and bulk micromachining methods. To illustrate the general application of our method, we demonstrated fabrications of large microfiltration membranes and free-standing beam structures in PDMS. PMID:22089984

IT as an enabler of sustainable use of data from innovative technical components for assisted living.

PubMed

Knaup, Petra; Schöpe, Lothar

2012-01-01

The authors see the major potential of systematically processing data from AAL-technology in higher sustainability, higher technology acceptance, higher security, higher robustness, higher flexibility and better integration in existing structures and processes. This potential is currently underachieved and not yet systematically promoted. The authors have written a position paper on potential and necessity of substantial IT research enhancing Ambient Assisted Living (AAL) applications. This paper summarizes the most important challenges in the fields health care, data protection, operation and user interfaces. Research in medical informatics is necessary among others in the fields flexible authorization concept, medical information needs, algorithms to evaluate user profiles and visualization of aggregated data.

Space station: A step into the future

NASA Technical Reports Server (NTRS)

Stofan, Andrew J.

1989-01-01

The Space Station is an essential element of NASA's ongoing program to recover from the loss of the Challenger and to regain for the United States its position of leadership in space. The Space Station Program has made substantial progress and some of the major efforts undertaken are discussed briefly. A few of the Space Station policies which have shaped the program are reviewed. NASA is dedicated to building a Station that, in serving science, technology, and commerce assured the United States a future in space as exciting and rewarding as the past. In cooperation with partners in the industry and abroad, the intent is to develop a Space Station that is intellectually productive, technically demanding, and genuinely useful.

A History of the ARPANET: The First Decade

DTIC Science & Technology

1981-04-01

10 2.2 Major Technical Problems and Approaches 11-12 2.3 Major Changes in Objectives and Approaches 11-19 3, ,3 Scientific and Technical Results and...successful projects ever undertaken by DARPA! The program has initiated extensive changes in the Defense Department’s use of computers as well as in...the ARPANET project represents a similarly far-reaching change in the use of computers by mankind. The full impact of the technical changes set in

Adapting Project Management Practices to Research-Based Projects

NASA Technical Reports Server (NTRS)

Bahr, P.; Baker, T.; Corbin, B.; Keith, L.; Loerch, L.; Mullenax, C.; Myers, R.; Rhodes, B.; Skytland, N.

2007-01-01

From dealing with the inherent uncertainties in outcomes of scientific research to the lack of applicability of current NASA Procedural Requirements guidance documentation, research-based projects present challenges that require unique application of classical project management techniques. If additionally challenged by the creation of a new program transitioning from basic to applied research in a technical environment often unfamiliar with the cost and schedule constraints addressed by project management practices, such projects can find themselves struggling throughout their life cycles. Finally, supplying deliverables to a prime vehicle customer, also in the formative stage, adds further complexity to the development and management of research-based projects. The Biomedical Research and Countermeasures Projects Branch at NASA Johnson Space Center encompasses several diverse applied research-based or research-enabling projects within the newly-formed Human Research Program. This presentation will provide a brief overview of the organizational structure and environment in which these projects operate and how the projects coordinate to address and manage technical requirements. We will identify several of the challenges (cost, technical, schedule, and personnel) encountered by projects across the Branch, present case reports of actions taken and techniques implemented to deal with these challenges, and then close the session with an open forum discussion of remaining challenges and potential mitigations.

48 CFR 227.7103-13 - Government right to review, verify, challenge and validate asserted restrictions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... validation. Contracting officers must have reasonable grounds to challenge the current validity of an... available information pertaining to the assertion. All challenges must be made in accordance with the provisions of the clause at 252.227-7037, Validation of Restrictive Markings on Technical Data. (1) Challenge...

Managing Adaptive Challenges: Learning with Principals in Bermuda and Florida

ERIC Educational Resources Information Center

Drago-Severson, Eleanor; Maslin-Ostrowski, Patricia; Hoffman, Alexander M.; Barbaro, Justin

2014-01-01

We interviewed eight principals from Bermuda and Florida about how they identify and manage their most pressing challenges. Their challenges are composed of both adaptive and technical work, requiring leaders to learn to diagnose and manage them. Challenges focused on change and were traced to accountability contexts, yet accountability was not…

Addressing tomorrow's DMO technical challenges today

NASA Astrophysics Data System (ADS)

Milligan, James R.

2009-05-01

Distributed Mission Operations (DMO) is essentially a type of networked training that pulls in participants from all the armed services and, increasingly, allies to permit them to "game" and rehearse highly complex campaigns, using a mix of local, distant, and virtual players. The United States Air Force Research Laboratory (AFRL) is pursuing Science and Technology (S&T) solutions to address technical challenges associated with distributed communications and information management as DMO continues to progressively scale up the number, diversity, and geographic dispersal of participants in training and rehearsal exercises.

Sonic Boom Modeling Technical Challenge

NASA Technical Reports Server (NTRS)

Sullivan, Brenda M.

2007-01-01

This viewgraph presentation reviews the technical challenges in modeling sonic booms. The goal of this program is to develop knowledge, capabilities and technologies to enable overland supersonic flight. The specific objectives of the modeling are: (1) Develop and validate sonic boom propagation model through realistic atmospheres, including effects of turbulence (2) Develop methods enabling prediction of response of and acoustic transmission into structures impacted by sonic booms (3) Develop and validate psychoacoustic model of human response to sonic booms under both indoor and outdoor listening conditions, using simulators.

Cockpit Accommodation Assessment of the Bell 412CF Helicopter (Evaluation du Poste de Pilotage de l’Hellcoptere Bell 412CF)

DTIC Science & Technology

2009-12-01

Research, Ottawa , 1998 as issued jointly by the Canadian Institutes of Health Research, the Natural Sciences and Engineering Research Council of Canada...Flight Rules ) skills. Nine Bell 412CF helicopters were produced from existing CH-146 Griffons, which posed technical challenges. One such compromise was...IFR (Instrument Flight Rules ) skills. Nine Bell 412CF helicopters were produced from existing CH-146 Griffons, which posed technical challenges. One

LUVOIR Tech Notes

NASA Technical Reports Server (NTRS)

Bolcar, Matthew R.; Shaklan, Stuart; Roberge, Aki; Rioux, Norman; Feinberg, Lee; Werner, Michael; Rauscher, Bernard; Mandell, Avi; France, Kevin; Schiminovich, David

2016-01-01

We present nine "tech notes" prepared by the Large UV/Optical/Infrared (LUVOIR) Science and Technology Definition Team (STDT), Study Office, and Technology Working Group. These tech notes are intended to highlight technical challenges that represent boundaries in the trade space for developing the LUVOIR architecture that may impact the science objectives being developed by the STDT. These tech notes are intended to be high-level discussions of the technical challenges and will serve as starting points for more in-depth analysis as the LUVOIR study progresses.

Robotic-Assisted Versus Manual Prostatic Arterial Embolization for Benign Prostatic Hyperplasia: A Comparative Analysis.

PubMed

Bagla, Sandeep; Smirniotopoulos, John; Orlando, Julie C; Piechowiak, Rachel

2017-03-01

Prostatic artery embolization (PAE) is a safe and efficacious procedure for benign prostatic hyperplasia (BPH), though is technically challenging. We present our experience of technical and clinical outcomes of robotic and manual PAE in patients with BPH. IRB-approved retrospective study of 40 consecutive patients 49-81 years old with moderate or severe grade BPH from May 2014 to July 2015: 20 robotic-assisted PAE (group 1), 20 manual PAE (group 2). Robotic-assisted PAE was performed using the Magellan Robotic System. American Urological Association (AUA-SI) score, cost, technical and clinical success, radiation dose, fluoroscopy, and procedure time were reviewed. Statistical analysis was performed within and between each group using paired t test and one-way analysis of variance respectively, at 1 and 3 months. No significant baseline differences in age and AUA-SI between groups. Technical success was 100% (group 1) and 95% (group 2). One unsuccessful subject from group 2 returned for a successful embolization using robotic assistance. Fluoroscopy and procedural times were similar between groups, with a non-significant lower patient radiation dose in group 1 (30,632.8 mGy/cm 2 vs 35,890.9, p = 0.269). Disposable cost was significantly different between groups with the robotic-assisted PAE incurring a higher cost (group 1 $4530.2; group 2 $1588.5, p < 0.0001). Clinical improvement was significant in both arms at 3 months: group 1 mean change in AUA-SI of 8.3 (p = 0.006), group 2: 9.6 (p < 0.0001). No minor or major complications occurred. Robotic-assisted PAE offers technical success comparable to manual PAE, with similar clinical improvement with an increased cost.

A quasi-Delphi study on technological barriers to the uptake of hydrogen as a fuel for transport applications-Production, storage and fuel cell drivetrain considerations

NASA Astrophysics Data System (ADS)

Hart, David; Anghel, Alexandra T.; Huijsmans, Joep; Vuille, François

The introduction of hydrogen in transport, particularly using fuel cell vehicles, faces a number of technical and non-technical hurdles. However, their relative importance is unclear, as are the levels of concern accorded them within the expert community conducting research and development within this area. To understand what issues are considered by experts working in the field to have significant potential to slow down or prevent the introduction of hydrogen technology in transport, a study was undertaken, primarily during 2007. Three key technology areas within hydrogen transport were selected - hydrogen storage, fuel cell drivetrains, and small-scale hydrogen production - and interviews with selected experts conducted. Forty-nine experts from 34 organisations within the fuel cell, automotive, industrial gas and other related industries participated, in addition to some key academic and government figures. The survey was conducted in China, Japan, North America and Europe, and analysed using conventional mathematical techniques to provide weighted and averaged rankings of issues viewed as important by the experts. It became clear both from the interviews and the subsequent analysis that while a primary concern in China was fundamental technical performance, in the other regions cost and policy were rated more highly. Although a few individual experts identified possible technical showstoppers, the overall message was that pre-commercial hydrogen fuel cell vehicles could realistically be on the road in tens of thousands within 5 years, and that full commercialisation could take place within 10-15 years, without the need for radical technical breakthroughs. Perhaps surprisingly, the performance of hydrogen storage technologies was not viewed as a showstopper, though cost was seen as a significant challenge. Overall, however, coherent policy development was more frequently identified as a major issue to address.

Total Quality Management (TQM) in Self-Financed Technical Institutions: A Quality Function Deployment (QFD) and Force Field Analysis Approach

ERIC Educational Resources Information Center

Thakkar, Jitesh; Deshmukh, S. G.; Shastree, Anil

2006-01-01

Purpose: To explore the potential for adoption of TQM in self-financed technical institutions in the light of new demands and challenges posed by customers/students and society. Design/methodology/approach: The paper presents use of quality function deployment (QFD) which prioritizes technical requirements and correlates them with various…

CFD Analysis of a Maneuvering F/A-18E Super Hornet

DTIC Science & Technology

2016-10-12

UNCLASSIFIED UNCLASSIFIED NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION PATUXENT RIVER, MARYLAND TECHNICAL INFORMATION MEMORANDUM...THE ABOVE ADDRESS. 1. REPORT DATE 12 October 2016 2. REPORT TYPE Technical Information Memorandum 3. DATES COVERED 2016 4. TITLE...dynamic unsteady effects of rapid motions of both the vehicle and its associated control surfaces is a known technical challenge. When aircraft

The Changing Role of Vocational and Technical Education and Training (VOTEC). Women in Vocational and Technical Education: Changes and Challenges.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France).

Changes in the vocational and technical education (VTE) opportunities available for women in Organisation for Economic Cooperation Development (OECD) member countries in response to changing labor markets and job skill requirements were discussed at a June 1994 meeting of experts. The discussions focused on the following issues: gender differences…

Prototype design for a predictive model to improve evacuation operations : technical report.

DOT National Transportation Integrated Search

2011-08-01

Mass evacuations of the Texas Gulf Coast remain a difficult challenge. These events are massive in scale, : highly complex, and entail an intricate, ever-changing conglomeration of technical and jurisdictional issues. : This project focused primarily...

Promises and challenges in solid-state lighting

NASA Astrophysics Data System (ADS)

Schubert, Fred

2010-03-01

Lighting technologies based on semiconductor light-emitting diodes (LEDs) offer unprecedented promises that include three major benefits: (i) Gigantic energy savings enabled by efficient conversion of electrical energy to optical energy; (ii) Substantial positive contributions to sustainability through reduced emissions of global-warming gases, acid-rain gases, and toxic substances such as mercury; and (iii) The creation of new paradigms in lighting driven by the unique controllability of solid-state lighting sources. Due to the powerful nature of these benefits, the transition from conventional lighting sources to solid-state lighting is virtually assured. This presentation will illustrate the new world of lighting and illustrate the pervasive changes to be expected in lighting, displays, communications, and biotechnology. The presentation will also address the formidable challenges that must be addressed to continue the further advancement of solid-state lighting technology. These challenges offer opportunities for research and innovation. Specific challenges include light management, carrier transport, and optical design. We will present some innovative approaches in order to solve known technical challenges faced by solid-state lighting. These approaches include the demonstration and use of new optical thin-film materials with a continuously tunable refractive index. These approaches also include the use of polarization-matched structures that reduce the polarization fields in GaInN LEDs and the hotly debated efficiency droop, that is, the decreasing LED efficiency at high currents.

Assessing the feasibility of introducing health insurance in Afghanistan: a qualitative stakeholder analysis.

PubMed

Zeng, Wu; Kim, Christine; Archer, Lauren; Sayedi, Omarzaman; Jabarkhil, Mohammad Yousuf; Sears, Kathleen

2017-02-22

In the last decade, the health status of Afghans has improved drastically. However, the health financing system in Afghanistan remains fragile due to high out-of-pocket spending and reliance on donor funding. To address the country's health financing challenges, the Ministry of Public Health investigated health insurance as a mechanism to mobilize resources for health. This paper presents stakeholders' opinions on seven preconditions of implementing this approach, as their understanding and buy-in to such an approach will determine its success. Key informant interviews and focus group discussions were conducted with stakeholders. The interviews focused on perceptions of the seven preconditions of introducing health insurance, and adapting a framework developed by the International Labor Organization. Content analysis was conducted after interviews and discussions were transcribed and coded. Almost all of the stakeholders from government agencies, the private sector, and development partners are interested in introducing health insurance in Afghanistan, and they were aware of the challenges of the country's health financing system. Stakeholders acknowledged that health insurance could be an instrument to address these challenges. However, stakeholders differed in their beliefs about how and when to initiate a health insurance scheme. In addition to increasing insecurity in the country, they saw a lack of clear legal guidance, low quality of healthcare services, poor awareness among the population, limited technical capacity, and challenges to willingness to pay as the major barriers to establishing a successful nationwide health insurance scheme. The identified barriers prevent Afghanistan from establishing health insurance in the short term. Afghanistan must progressively address these major impediments in order to build a health insurance system.

Benchmarking Big Data Systems and the BigData Top100 List.

PubMed

Baru, Chaitanya; Bhandarkar, Milind; Nambiar, Raghunath; Poess, Meikel; Rabl, Tilmann

2013-03-01

"Big data" has become a major force of innovation across enterprises of all sizes. New platforms with increasingly more features for managing big datasets are being announced almost on a weekly basis. Yet, there is currently a lack of any means of comparability among such platforms. While the performance of traditional database systems is well understood and measured by long-established institutions such as the Transaction Processing Performance Council (TCP), there is neither a clear definition of the performance of big data systems nor a generally agreed upon metric for comparing these systems. In this article, we describe a community-based effort for defining a big data benchmark. Over the past year, a Big Data Benchmarking Community has become established in order to fill this void. The effort focuses on defining an end-to-end application-layer benchmark for measuring the performance of big data applications, with the ability to easily adapt the benchmark specification to evolving challenges in the big data space. This article describes the efforts that have been undertaken thus far toward the definition of a BigData Top100 List. While highlighting the major technical as well as organizational challenges, through this article, we also solicit community input into this process.

Supersonics--Airport Noise

NASA Technical Reports Server (NTRS)

Bridges, James

2007-01-01

At this, the first year-end meeting of the Fundamental Aeronautics Program, an overview of the Airport Noise discipline of the Supersonics Project leads the presentation of technical plans and achievements in this area of the Project. The overview starts by defining the Technical Challenges targeted by Airport Noise efforts, and the Approaches planned to meet these challenges. These are fleshed out in Elements, namely Prediction, Diagnostics, and Engineering, and broken down into Tasks. The Tasks level is where individual researchers' work is defined and from whence the technical presentations to follow this presentation come. This overview also presents the Milestones accomplished to date and to be completed in the next year. Finally, the NASA Research Announcement cooperative agreement activities are covered and tied to the Tasks and Milestones.

Anaesthetic perioperative management of patients with pancreatic cancer

PubMed Central

De Pietri, Lesley; Montalti, Roberto; Begliomini, Bruno

2014-01-01

Pancreatic cancer remains a significant and unresolved therapeutic challenge. Currently, the only curative treatment for pancreatic cancer is surgical resection. Pancreatic surgery represents a technically demanding major abdominal procedure that can occasionally lead to a number of pathophysiological alterations resulting in increased morbidity and mortality. Systemic, rather than surgical complications, cause the majority of deaths. Because patients are increasingly referred to surgery with at advanced ages and because pancreatic surgery is extremely complex, anaesthesiologists and surgeons play a crucial role in preoperative evaluations and diagnoses for surgical intervention. The anaesthetist plays a key role in perioperative management and can significantly influence patient outcome. To optimise overall care, patients should be appropriately referred to tertiary centres, where multidisciplinary teams (surgical, medical, radiation oncologists, gastroenterologists, interventional radiologists and anaesthetists) work together and where close cooperation between surgeons and anaesthesiologists promotes the safe performance of major gastrointestinal surgeries with acceptable morbidity and mortality rates. In this review, we sought to provide simple daily recommendations to the clinicians who manage pancreatic surgery patients to make their work easier and suggest a joint approach between surgeons and anaesthesiologists in daily decision making. PMID:24605028

Fundamental Aeronautics Program: Overview of Propulsion Work in the Supersonic Cruise Efficiency Technical Challenge

NASA Technical Reports Server (NTRS)

Castner, Ray

2012-01-01

The Supersonics Project, part of NASA's Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2012) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

Identification of usual interstitial pneumonia pattern using RNA-Seq and machine learning: challenges and solutions.

PubMed

Choi, Yoonha; Liu, Tiffany Ting; Pankratz, Daniel G; Colby, Thomas V; Barth, Neil M; Lynch, David A; Walsh, P Sean; Raghu, Ganesh; Kennedy, Giulia C; Huang, Jing

2018-05-09

We developed a classifier using RNA sequencing data that identifies the usual interstitial pneumonia (UIP) pattern for the diagnosis of idiopathic pulmonary fibrosis. We addressed significant challenges, including limited sample size, biological and technical sample heterogeneity, and reagent and assay batch effects. We identified inter- and intra-patient heterogeneity, particularly within the non-UIP group. The models classified UIP on transbronchial biopsy samples with a receiver-operating characteristic area under the curve of ~ 0.9 in cross-validation. Using in silico mixed samples in training, we prospectively defined a decision boundary to optimize specificity at ≥85%. The penalized logistic regression model showed greater reproducibility across technical replicates and was chosen as the final model. The final model showed sensitivity of 70% and specificity of 88% in the test set. We demonstrated that the suggested methodologies appropriately addressed challenges of the sample size, disease heterogeneity and technical batch effects and developed a highly accurate and robust classifier leveraging RNA sequencing for the classification of UIP.

Augmented digestion of lignocellulose by steam explosion, acid and alkaline pretreatment methods: a review.

PubMed

Singh, Joginder; Suhag, Meenakshi; Dhaka, Anil

2015-03-06

Lignocellulosic materials can be explored as one of the sustainable substrates for bioethanol production through microbial intervention as they are abundant, cheap and renewable. But at the same time, their recalcitrant structure makes the conversion process more cumbersome owing to their chemical composition which adversely affects the efficiency of bioethanol production. Therefore, the technical approaches to overcome recalcitrance of biomass feedstock has been developed to remove the barriers with the help of pretreatment methods which make cellulose more accessible to the hydrolytic enzymes, secreted by the microorganisms, for its conversion to glucose. Pretreatment of lignocellulosic biomass in cost effective manner is a major challenge to bioethanol technology research and development. Hence, in this review, we have discussed various aspects of three commonly used pretreatment methods, viz., steam explosion, acid and alkaline, applied on various lignocellulosic biomasses to augment their digestibility alongwith the challenges associated with their processing. Copyright © 2014 Elsevier Ltd. All rights reserved.

International involvement and national health governance: the basic benefit package in Tajikistan.

PubMed

Rechel, Bernd; Khodjamurodov, Ghafur

2010-06-01

Tajikistan, a Central Asian state of 7.4 million inhabitants, is facing particular health policy challenges: not only is the country the poorest of the former Soviet republics, but its capacity to deal with post-communist transition and economic crisis has been further undermined through civil war and large-scale migration. This paper, examining the introduction of the basic benefit package and formal co-payments, elucidates how international involvement in Tajikistan's health sector has impacted on national health governance. Based on documentary sources and information provided by key informants, we find that external agencies have both strengthened and weakened national health governance. Although they have played a major part in supporting Tajikistan's health sector, these efforts have often been fragmented, as donor coordination was at times less than optimal. A key challenge for national health governance is the limited technical and institutional capacity of the Ministry of Health and further efforts are needed to build national capacity. Copyright 2010 Elsevier Ltd. All rights reserved.

The Future of Low-Carbon Transportation Fuels

NASA Astrophysics Data System (ADS)

Yang, Christopher; Yeh, Sonia

2011-11-01

Petroleum fuel uses make up essentially all of transportation fuel usage today and will continue to dominate transportation fuel usage well into future without any major policy changes. This chapter focuses on low-carbon transportation fuels, specifically, biofuels, electricity and hydrogen, that are emerging options to displace petroleum based fuels. The transition to cleaner, lower carbon fuel sources will need significant technology advancement, and sustained coordination efforts among the vehicle and fuel industry and policymakers/regulators over long period of time in order to overcome market barriers, consumer acceptance, and externalities of imported oil. We discuss the unique infrastructure challenges, and compare resource, technology, economics and transitional issues for each of these fuels. While each fuel type has important technical and implementation challenges to overcome (including vehicle technologies) in order to contribute a large fraction of our total fuel demand, it is important to note that a portfolio approach will give us the best chance of meeting stringent environmental and energy security goals for a sustainable transportation future.

Theranostic quantum dots for crossing blood–brain barrier in vitro and providing therapy of HIV-associated encephalopathy

PubMed Central

Xu, Gaixia; Mahajan, Supriya; Roy, Indrajit; Yong, Ken-Tye

2013-01-01

The blood–brain barrier (BBB) is a complex physiological checkpoint that restricts the free diffusion of circulating molecules from the blood into the central nervous system. Delivering of drugs and other active agents across the BBB is one of the major technical challenges faced by scientists and medical practitioners. Therefore, development of novel methodologies to address this challenge holds the key for both the diagnosis and treatment of brain diseases, such as HIV-associated encephalopathy. Bioconjugated quantum dots (QDs) are excellent fluorescent probes and nano-vectors, being designed to transverse across the BBB and visualize drug delivery inside the brain. This paper discusses the use of functionalized QDs for crossing the blood–brain barrier and treating brain disease. We highlight the guidelines for using in vitro BBB models for brain disease studies. The theranostic QDs offers a strategy to significantly improve the effective dosages of drugs to transverse across the BBB and orientate to the targets inside the brain. PMID:24298256

Use of GPM Data Products in SERVIR Hydrological Applications

NASA Astrophysics Data System (ADS)

Limaye, A. S.; Mithieu, F.; Gurung, D. R.; Blankenship, C. B.; Crosson, W. L.; Anderson, E. R.; Flores, A.; Delgado, F.; Stanton, K.; Irwin, D.

2015-12-01

Availability of reliable precipitation data is a major challenge for SERVIR, a joint USAID-NASA project aimed at improving the environmental decision-making capacity of developing countries. GPM data products are fulfilling that challenge through frequent, high spatial resolution precipitation products over regional scales. SERVIR is using the products in different ways. First, SERVIR is using those in hydrologic modeling over Eastern Africa and in Hindu Kush Himalaya. SERVIR's distributed hydrologic modeling capability is helping the hydrological and meteorological departments in SERVIR regions, or Hubs, identify local watershed deserving immediate attention - such as recurring floods. Additionally, SERVIR technical implementers in the Hubs are building capacities of the departments and ministries in their member countries to effectively use the GPM products. SERVIR also provides an easy access for efficient integration of GPM products in web map services. This presentation will highlight ongoing collaborations and results generated through collaborative partnership among the water resources and hydrometeorology departments in Kenya, Uganda, Rwanda, Namibia, and Bhutan, SERVIR Hubs, and SERVIR Applied Sciences Team projects

Development Roadmap of an Evolvable and Extensible Multi-Mission Telecom Planning and Analysis Framework

NASA Technical Reports Server (NTRS)

Cheung, Kar-Ming; Tung, Ramona H.; Lee, Charles H.

2003-01-01

In this paper, we describe the development roadmap and discuss the various challenges of an evolvable and extensible multi-mission telecom planning and analysis framework. Our long-term goal is to develop a set of powerful flexible telecommunications analysis tools that can be easily adapted to different missions while maintain the common Deep Space Communication requirements. The ability of re-using the DSN ground models and the common software utilities in our adaptations has contributed significantly to our development efforts measured in terms of consistency, accuracy, and minimal effort redundancy, which can translate into shorter development time and major cost savings for the individual missions. In our roadmap, we will address the design principles, technical achievements and the associated challenges for following telecom analysis tools (i) Telecom Forecaster Predictor - TFP (ii) Unified Telecom Predictor - UTP (iii) Generalized Telecom Predictor - GTP (iv) Generic TFP (v) Web-based TFP (vi) Application Program Interface - API (vii) Mars Relay Network Planning Tool - MRNPT.

Genetic resistance: tolerance to vector-borne diseases and the prospects and challenges of genomics.

PubMed

Bahbahani, H; Hanotte, O

2015-04-01

Vector-borne diseases in cattle and small ruminants (e.g. trypanosomosis, Rift Valley fever and East Coast fever) are associated with major economic losses in tropical countries, and particularly on the African continent. A variety of control strategies (e.g. management, vaccination and/or acaricide treatments) are used to minimise their negative impacts. These strategies are often associated with environmental, technical and/or economic drawbacks. However, several indigenous livestock populations have been reported to show a level of genetic tolerance or resistance to such disease challenges (e.g. trypanotolerant N'Dama cattle and Djallonké sheep). Use of these populations represents a sustainable alternative approach to minimising the negative impact of such infection/infestation on livestock production. This review summarises the current understanding of the genetic control of these adaptations, identifies knowledge gaps and critically examines the possible impacts of genomics approaches to the genetic improvement of tolerance and/or resistance to vector-borne diseases.

Skeletal Muscle Tissue Engineering: Methods to Form Skeletal Myotubes and Their Applications

PubMed Central

Ostrovidov, Serge; Hosseini, Vahid; Ahadian, Samad; Fujie, Toshinori; Parthiban, Selvakumar Prakash; Ramalingam, Murugan; Bae, Hojae; Kaji, Hirokazu

2014-01-01

Skeletal muscle tissue engineering (SMTE) aims to repair or regenerate defective skeletal muscle tissue lost by traumatic injury, tumor ablation, or muscular disease. However, two decades after the introduction of SMTE, the engineering of functional skeletal muscle in the laboratory still remains a great challenge, and numerous techniques for growing functional muscle tissues are constantly being developed. This article reviews the recent findings regarding the methodology and various technical aspects of SMTE, including cell alignment and differentiation. We describe the structure and organization of muscle and discuss the methods for myoblast alignment cultured in vitro. To better understand muscle formation and to enhance the engineering of skeletal muscle, we also address the molecular basics of myogenesis and discuss different methods to induce myoblast differentiation into myotubes. We then provide an overview of different coculture systems involving skeletal muscle cells, and highlight major applications of engineered skeletal muscle tissues. Finally, potential challenges and future research directions for SMTE are outlined. PMID:24320971

Assessing Induced Seismicity Risk at CO 2 Storage Projects: Recent Progress and Remaining Challenges

DOE PAGES

White, Joshua A.; Foxall, William

2016-04-13

It is well established that fluid injection has the potential to induce earthquakes—from microseismicity to magnitude 5+ events—by altering state-of-stress conditions in the subsurface. This paper reviews recent lessons learned regarding induced seismicity at carbon storage sites. While similar to other subsurface injection practices, CO 2 injection has distinctive features that should be included in a discussion of its seismic hazard. Induced events have been observed at CO 2 injection projects, though to date it has not been a major operational issue. Nevertheless, the hazard exists and experience with this issue will likely grow as new storage operations come online.more » This review paper focuses on specific technical difficulties that can limit the effectiveness of current risk assessment and risk management approaches, and highlights recent research aimed at overcoming them. Finally, these challenges form the heart of the induced seismicity problem, and novel solutions to them will advance our ability to responsibly deploy large-scale CO 2 storage.« less

Education Industry, 2006

DTIC Science & Technology

2006-01-01

resulted in the U.S. Department of Education referring to it as Career and Technical Education (CTE). Minuteman High School, a highly successful...whole, and ultimately the students and the nation, will suffer the consequences. 7 Vocational Education The challenge for Career and Technical Education (CTE

Quantitative proteomics in cardiovascular research: global and targeted strategies

PubMed Central

Shen, Xiaomeng; Young, Rebeccah; Canty, John M.; Qu, Jun

2014-01-01

Extensive technical advances in the past decade have substantially expanded quantitative proteomics in cardiovascular research. This has great promise for elucidating the mechanisms of cardiovascular diseases (CVD) and the discovery of cardiac biomarkers used for diagnosis and treatment evaluation. Global and targeted proteomics are the two major avenues of quantitative proteomics. While global approaches enable unbiased discovery of altered proteins via relative quantification at the proteome level, targeted techniques provide higher sensitivity and accuracy, and are capable of multiplexed absolute quantification in numerous clinical/biological samples. While promising, technical challenges need to be overcome to enable full utilization of these techniques in cardiovascular medicine. Here we discuss recent advances in quantitative proteomics and summarize applications in cardiovascular research with an emphasis on biomarker discovery and elucidating molecular mechanisms of disease. We propose the integration of global and targeted strategies as a high-throughput pipeline for cardiovascular proteomics. Targeted approaches enable rapid, extensive validation of biomarker candidates discovered by global proteomics. These approaches provide a promising alternative to immunoassays and other low-throughput means currently used for limited validation. PMID:24920501

The remote sensing data from your UAV probably isn't scientific, but it should be!

NASA Astrophysics Data System (ADS)

McKee, Mac

2017-05-01

The application of unmanned autonomous vehicles (UAVs), or "drones", to generate data to support better decisions for agricultural management and farm operations is a relatively new technology that is now beginning to enter the market. This potentially disruptive technology is still in its infancy and must mature in ways that the current market cannot clearly foresee and probably does not fully understand. Major technical and regulatory hurdles must be overcome before the full potential of this remote sensing technology can be realized in agricultural applications. Further, and most importantly, buyers and sellers in today's market must both gain a deeper understanding of the potential that this technology might achieve and the technical challenges that must be met before advances that will bring significant market value will be possible. A lack of understanding of some of the basic concepts of remote sensing can translate into poor decisions regarding the acquisition and deployment of UAVs in agriculture. This paper focuses on some of the details of remote sensing that few growers, and, indeed, few university researchers fully understand.

A Review of Intravascular Ultrasound–Based Multimodal Intravascular Imaging: The Synergistic Approach to Characterizing Vulnerable Plaques

PubMed Central

Ma, Teng; Zhou, Bill; Hsiai, Tzung K.; Shung, K. Kirk

2015-01-01

Catheter-based intravascular imaging modalities are being developed to visualize pathologies in coronary arteries, such as high-risk vulnerable atherosclerotic plaques known as thin-cap fibroatheroma, to guide therapeutic strategy at preventing heart attacks. Mounting evidences have shown three distinctive histopathological features—the presence of a thin fibrous cap, a lipid-rich necrotic core, and numerous infiltrating macrophages—are key markers of increased vulnerability in atherosclerotic plaques. To visualize these changes, the majority of catheter-based imaging modalities used intravascular ultrasound (IVUS) as the technical foundation and integrated emerging intravascular imaging techniques to enhance the characterization of vulnerable plaques. However, no current imaging technology is the unequivocal “gold standard” for the diagnosis of vulnerable atherosclerotic plaques. Each intravascular imaging technology possesses its own unique features that yield valuable information although encumbered by inherent limitations not seen in other modalities. In this context, the aim of this review is to discuss current scientific innovations, technical challenges, and prospective strategies in the development of IVUS-based multi-modality intravascular imaging systems aimed at assessing atherosclerotic plaque vulnerability. PMID:26400676

Technical status of the International Monitoring System for the Comprehensive Nuclear-Test-Ban Treaty

NASA Astrophysics Data System (ADS)

Grenard, P.

2009-04-01

The International Monitoring System (IMS) for the Comprehensive Nuclear Test-ban-Treaty Organization is a global Network of stations for detecting and providing evidence of possible nuclear explosions. Upon completion, the IMS will consist of 321 monitoring facilities and 16 radionuclide laboratories distributed worldwide in locations designated by the Treaty. Many of these sites are located in areas that are remote and difficult to access, posing major engineering and logistical challenges. The IMS uses seismic, hydroacoustic and infrasound monitoring waveform technologies to detect signals released from an explosion or a naturally occurring event (e.g. earthquakes) in the underground, underwater and atmospheric environments. The radionuclide technology as an integral part of the IMS uses air samples to collect particular matter from the atmosphere. Samples are then analyzed for evidence of physical products created by a nuclear explosion and carried through the atmosphere. The certification process of the IMS stations assures their compliance with the IMS technical requirements. In 2008 significant progress was made towards the completion of the IMS Network. So far 75% of the IMS stations have been built and certified.

Thinking Outside the Lab

NASA Astrophysics Data System (ADS)

Colter, Tabitha

2017-01-01

As an undergraduate physics major who spent 2015 deep in a quantum optics lab at Oak Ridge National Laboratory, I knew my 2016 experience with the House of Representatives Energy and Commerce Committee would be a completely new challenge. I have long had a passion for the bridge of communication between the technical and non-technical worlds but it was only through my AIP Mather internship this summer that I was able to see that passion come to life in the realm of science policy. Suddenly, I went from squeezing political philosophy classes into my packed schedule to witnessing the political process first-hand. I was thrilled to find that the skills of critical thinking and communicating complex issues I have developed throughout my training as a physicist were directly applicable to my work in Congress. Overall, my experience this summer has given me insight into the inner workings of the federal policy process, deepened my appreciation for the work of government employees to keep Congressional members informed on the pressing current issues, and exposed me to a whole range of alternative careers within science. AIP and SPS

Concentrating solar power (CSP) power cycle improvements through application of advanced materials

NASA Astrophysics Data System (ADS)

Siefert, John A.; Libby, Cara; Shingledecker, John

2016-05-01

Concentrating solar power (CSP) systems with thermal energy storage (TES) capability offer unique advantages to other renewable energy technologies in that solar radiation can be captured and stored for utilization when the sun is not shining. This makes the technology attractive as a dispatchable resource, and as such the Electric Power Research Institute (EPRI) has been engaged in research and development activities to understand and track the technology, identify key technical challenges, and enable improvements to meet future cost and performance targets to enable greater adoption of this carbon-free energy resource. EPRI is also involved with technically leading a consortium of manufacturers, government labs, and research organizations to enable the next generation of fossil fired power plants with advanced ultrasupercritical (A-USC) steam temperatures up to 760°C (1400°F). Materials are a key enabling technology for both of these seemingly opposed systems. This paper discusses how major strides in structural materials for A-USC fossil fired power plants may be translated into improved CSP systems which meet target requirements.

Application of dexterous space robotics technology to myoelectric prostheses

NASA Astrophysics Data System (ADS)

Hess, Clifford; Li, Larry C. H.; Farry, Kristin A.; Walker, Ian D.

1994-02-01

Future space missions will require robots equipped with highly dexterous robotic hands to perform a variety of tasks. A major technical challenge in making this possible is an improvement in the way these dexterous robotic hands are remotely controlled or teleoperated. NASA is currently investigating the feasibility of using myoelectric signals to teleoperate a dexterous robotic hand. In theory, myoelectric control of robotic hands will require little or no mechanical parts and will greatly reduce the bulk and weight usually found in dexterous robotic hand control devices. An improvement in myoelectric control of multifinger hands will also benefit prosthetics users. Therefore, as an effort to transfer dexterous space robotics technology to prosthetics applications and to benefit from existing myoelectric technology, NASA is collaborating with the Limbs of Love Foundation, the Institute for Rehabilitation and Research, and Rice University in developing improved myoelectric control multifinger hands and prostheses. In this paper, we will address the objectives and approaches of this collaborative effort and discuss the technical issues associated with myoelectric control of multifinger hands. We will also report our current progress and discuss plans for future work.

Application of dexterous space robotics technology to myoelectric prostheses

NASA Technical Reports Server (NTRS)

Hess, Clifford; Li, Larry C. H.; Farry, Kristin A.; Walker, Ian D.

1994-01-01

Future space missions will require robots equipped with highly dexterous robotic hands to perform a variety of tasks. A major technical challenge in making this possible is an improvement in the way these dexterous robotic hands are remotely controlled or teleoperated. NASA is currently investigating the feasibility of using myoelectric signals to teleoperate a dexterous robotic hand. In theory, myoelectric control of robotic hands will require little or no mechanical parts and will greatly reduce the bulk and weight usually found in dexterous robotic hand control devices. An improvement in myoelectric control of multifinger hands will also benefit prosthetics users. Therefore, as an effort to transfer dexterous space robotics technology to prosthetics applications and to benefit from existing myoelectric technology, NASA is collaborating with the Limbs of Love Foundation, the Institute for Rehabilitation and Research, and Rice University in developing improved myoelectric control multifinger hands and prostheses. In this paper, we will address the objectives and approaches of this collaborative effort and discuss the technical issues associated with myoelectric control of multifinger hands. We will also report our current progress and discuss plans for future work.

Space Communications and Navigation (SCaN) Integrated Network Architecture Definition Document (ADD). Volume 1; Executive Summary; Revision 1

NASA Technical Reports Server (NTRS)

Younes, Badri A.; Schier, James S.

2010-01-01

The SCaN Program has defined an integrated network architecture that fully meets the Administrator s mandate to the Program, and will result in a NASA infrastructure capable of providing the needed and enabling communications services to future space missions. The integrated network architecture will increase SCaN operational efficiency and interoperability through standardization, commonality and technology infusion. It will enable NASA missions requiring advanced communication and tracking capabilities such as: a. Optical communication b. Antenna arraying c. Lunar and Mars Relays d. Integrated network management (service management and network control) and integrated service execution e. Enhanced tracking for navigation f. Space internetworking with DTN and IP g. End-to-end security h. Enhanced security services Moreover, the SCaN Program has created an Integrated Network Roadmap that depicts an orchestrated and coherent evolution path toward the target architecture, encompassing all aspects that concern network assets (i.e., operations and maintenance, sustaining engineering, upgrade efforts, and major development). This roadmap identifies major NASA ADPs, and shows dependencies and drivers among the various planned undertakings and timelines. The roadmap is scalable to accommodate timely adjustments in response to Agency needs, goals, objectives and funding. Future challenges to implementing this architecture include balancing user mission needs, technology development, and the availability of funding within NASA s priorities. Strategies for addressing these challenges are to: define a flexible architecture, update the architecture periodically, use ADPs to evaluate options and determine when to make decisions, and to engage the stakeholders in these evaluations. In addition, the SCaN Program will evaluate and respond to mission need dates for technical and operational capabilities to be provided by the SCaN integrated network. In that regard, the architecture defined in this ADD is scalable to accommodate programmatic and technical changes.

A Report to the U.S. Department of Education on Educational Challenges and Technical Assistance Needs for the Northeast Region

ERIC Educational Resources Information Center

CNA Corporation, 2005

2005-01-01

The Northeast Regional Advisory Committee (NE RAC) provides an assessment of the technical assistance needs of educators in the Northeast Region in response to a directive from the Secretary of the U.S. Department of Education (ED). The Secretary will use this assessment in establishing 20 comprehensive centers to provide technical assistance to…

The Challenge of the Future. Future Trends in Adult and Continuing Technical and Vocational Education. An International Symposium (Berlin, Germany, October 16-20, 1995).

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Hamburg (Germany). Inst. for Education.

This report on an international symposium on the strengthening of the development and improvement of vocational education begins with a description of UNEVOC, the International Project on Technical and Vocational Education. Section 2 presents discussions of the following topics: adult and continuing technical and vocational education and its…

Introducing Development Education in Technical Universities: Successful Experiences in Spain

ERIC Educational Resources Information Center

Boni, A.; Perez-Foguet, A.

2008-01-01

This paper presents and analyses the main characteristics of successful experiences of Development Education (DE) introduced in two major Spanish Technical Universities (Technical University of Catalonia, TUC, and Technical University of Valencia, TUV) during the nineties and the beginning of the twenty-first century. In this paper, after a brief…

An Interdisciplinary Program in Technical Communications: Problems Encountered.

ERIC Educational Resources Information Center

Eckman, Martha

The need for experts in technical communication is growing significantly while the number of college graduates in the field accounts for less than one percent of the need. Three major types of problems should be considered in trying to establish a technical communication program: those involving society's need for better technical communicators,…

LANDFILL GAS ENERGY UTILIZATION EXPERIENCE: DISCUSSION OF TECHNICAL AND NON-TECHNICAL ISSUES, SOLUTIONS, AND TRENDS

EPA Science Inventory

The report discusses technical and non-technical considerations associated with the development and operation of landfill gas to energy projects. Much of the report is based on interviews and site visits with the major developers and operators of the more than 110 projects in the...

Space Shuttle Guidance, Navigation, and Rendezvous Knowledge Capture Reports. Revision 1

NASA Technical Reports Server (NTRS)

Goodman, John L.

2011-01-01

This document is a catalog and readers guide to lessons learned, experience, and technical history reports, as well as compilation volumes prepared by United Space Alliance personnel for the NASA/Johnson Space Center (JSC) Flight Dynamics Division.1 It is intended to make it easier for future generations of engineers to locate knowledge capture documentation from the Shuttle Program. The first chapter covers observations on documentation quality and research challenges encountered during the Space Shuttle and Orion programs. The second chapter covers the knowledge capture approach used to create many of the reports covered in this document. These chapters are intended to provide future flight programs with insight that could be used to formulate knowledge capture and management strategies. The following chapters contain descriptions of each knowledge capture report. The majority of the reports concern the Space Shuttle. Three are included that were written in support of the Orion Program. Most of the reports were written from the years 2001 to 2011. Lessons learned reports concern primarily the shuttle Global Positioning System (GPS) upgrade and the knowledge capture process. Experience reports on navigation and rendezvous provide examples of how challenges were overcome and how best practices were identified and applied. Some reports are of a more technical history nature covering navigation and rendezvous. They provide an overview of mission activities and the evolution of operations concepts and trajectory design. The lessons learned, experience, and history reports would be considered secondary sources by historians and archivists.

EHRs in primary care practices: benefits, challenges, and successful strategies.

PubMed

Goetz Goldberg, Debora; Kuzel, Anton J; Feng, Lisa Bo; DeShazo, Jonathan P; Love, Linda E

2012-02-01

To understand the current use of electronic health records (EHRs) in small primary care practices and to explore experiences and perceptions of physicians and staff toward the benefits, challenges, and successful strategies for implementation and meaningful use of advanced EHR functions. Qualitative case study of 6 primary care practices in Virginia. We performed surveys and in-depth interviews with clinicians and administrative staff (N = 38) and observed interpersonal relations and use of EHR functions over a 16-month period. Practices with an established EHR were selected based on a maximum variation of quality activities, location, and ownership. Physicians and staff report increased efficiency in retrieving medical records, storing patient information, coordination of care, and office operations. Costs, lack of knowledge of EHR functions, and problems transforming office operations were barriers reported for meaningful use of EHRs. Major disruption to patient care during upgrades and difficulty utilizing performance tracking and quality functions were also reported. Facilitators for adopting and using advanced EHR functions include team-based care, adequate technical support, communication and training for employees and physicians, alternative strategies for patient care during transition, and development of new processes and work flow procedures. Small practices experience difficulty with implementation and utilization of advanced EHR functions. Federal and state policies should continue to support practices by providing technical assistance and financial incentives, grants, and/or loans. Small practices should consider using regional extension center services and reaching out to colleagues and other healthcare organizations with similar EHR systems for advice and guidance.

Laser geodynamic satellite thermal/optical/ vibrational analyses and testing. Volume 2: Technical report, book 1. [retroreflector design

NASA Technical Reports Server (NTRS)

1974-01-01

The results of the LAGEOS thermal/optical/vibrational analysis and test program are reported. Through analyses and tests it is verified that the MSFC LAGEOS design provides a retroreflector thermal environment which maintains acceptable retroflector internal thermal gradients. The technical results of the study, organized by the major task areas are presented. The interrelationships of the major tasks are described and the major decisions are identified.

Open Source in Education

ERIC Educational Resources Information Center

Lakhan, Shaheen E.; Jhunjhunwala, Kavita

2008-01-01

Educational institutions have rushed to put their academic resources and services online, beginning the global community onto a common platform and awakening the interest of investors. Despite continuing technical challenges, online education shows great promise. Open source software offers one approach to addressing the technical problems in…

Technician Education Yearbook 1984.

ERIC Educational Resources Information Center

Prakken Publications, Inc., Ann Arbor, MI.

This yearbook deals with technician education. Included in a section on new issues, problems, and proposals for technician education are the following papers: "High Technology Challenges the Vocational-Technical Curriculum," by Walter J. Brooking; "Assessment of Technical Competency," by Gordon C. McMahon; "Industry and Education Cooperation…

Challenges in leveraging existing human performance data for quantifying the IDHEAS HRA method

DOE PAGES

Liao, Huafei N.; Groth, Katrina; Stevens-Adams, Susan

2015-07-29

Our article documents an exploratory study for collecting and using human performance data to inform human error probability (HEP) estimates for a new human reliability analysis (HRA) method, the IntegrateD Human Event Analysis System (IDHEAS). The method was based on cognitive models and mechanisms underlying human behaviour and employs a framework of 14 crew failure modes (CFMs) to represent human failures typical for human performance in nuclear power plant (NPP) internal, at-power events [1]. A decision tree (DT) was constructed for each CFM to assess the probability of the CFM occurring in different contexts. Data needs for IDHEAS quantification aremore » discussed. Then, the data collection framework and process is described and how the collected data were used to inform HEP estimation is illustrated with two examples. Next, five major technical challenges are identified for leveraging human performance data for IDHEAS quantification. Furthermore, these challenges reflect the data needs specific to IDHEAS. More importantly, they also represent the general issues with current human performance data and can provide insight for a path forward to support HRA data collection, use, and exchange for HRA method development, implementation, and validation.« less

Evolving Applications, Technological Challenges and Future Opportunities in Neuromodulation: Proceedings of the Fifth Annual Deep Brain Stimulation Think Tank

PubMed Central

Ramirez-Zamora, Adolfo; Giordano, James J.; Gunduz, Aysegul; Brown, Peter; Sanchez, Justin C.; Foote, Kelly D.; Almeida, Leonardo; Starr, Philip A.; Bronte-Stewart, Helen M.; Hu, Wei; McIntyre, Cameron; Goodman, Wayne; Kumsa, Doe; Grill, Warren M.; Walker, Harrison C.; Johnson, Matthew D.; Vitek, Jerrold L.; Greene, David; Rizzuto, Daniel S.; Song, Dong; Berger, Theodore W.; Hampson, Robert E.; Deadwyler, Sam A.; Hochberg, Leigh R.; Schiff, Nicholas D.; Stypulkowski, Paul; Worrell, Greg; Tiruvadi, Vineet; Mayberg, Helen S.; Jimenez-Shahed, Joohi; Nanda, Pranav; Sheth, Sameer A.; Gross, Robert E.; Lempka, Scott F.; Li, Luming; Deeb, Wissam; Okun, Michael S.

2018-01-01

The annual Deep Brain Stimulation (DBS) Think Tank provides a focal opportunity for a multidisciplinary ensemble of experts in the field of neuromodulation to discuss advancements and forthcoming opportunities and challenges in the field. The proceedings of the fifth Think Tank summarize progress in neuromodulation neurotechnology and techniques for the treatment of a range of neuropsychiatric conditions including Parkinson's disease, dystonia, essential tremor, Tourette syndrome, obsessive compulsive disorder, epilepsy and cognitive, and motor disorders. Each section of this overview of the meeting provides insight to the critical elements of discussion, current challenges, and identified future directions of scientific and technological development and application. The report addresses key issues in developing, and emphasizes major innovations that have occurred during the past year. Specifically, this year's meeting focused on technical developments in DBS, design considerations for DBS electrodes, improved sensors, neuronal signal processing, advancements in development and uses of responsive DBS (closed-loop systems), updates on National Institutes of Health and DARPA DBS programs of the BRAIN initiative, and neuroethical and policy issues arising in and from DBS research and applications in practice. PMID:29416498

The Promise of Systems Biology Approaches for Revealing Host Pathogen Interactions in Malaria

PubMed Central

Zuck, Meghan; Austin, Laura S.; Danziger, Samuel A.; Aitchison, John D.; Kaushansky, Alexis

2017-01-01

Despite global eradication efforts over the past century, malaria remains a devastating public health burden, causing almost half a million deaths annually (WHO, 2016). A detailed understanding of the mechanisms that control malaria infection has been hindered by technical challenges of studying a complex parasite life cycle in multiple hosts. While many interventions targeting the parasite have been implemented, the complex biology of Plasmodium poses a major challenge, and must be addressed to enable eradication. New approaches for elucidating key host-parasite interactions, and predicting how the parasite will respond in a variety of biological settings, could dramatically enhance the efficacy and longevity of intervention strategies. The field of systems biology has developed methodologies and principles that are well poised to meet these challenges. In this review, we focus our attention on the Liver Stage of the Plasmodium lifecycle and issue a “call to arms” for using systems biology approaches to forge a new era in malaria research. These approaches will reveal insights into the complex interplay between host and pathogen, and could ultimately lead to novel intervention strategies that contribute to malaria eradication. PMID:29201016

Implementing PAT with Standards

NASA Astrophysics Data System (ADS)

Chandramohan, Laakshmana Sabari; Doolla, Suryanarayana; Khaparde, S. A.

2016-02-01

Perform Achieve Trade (PAT) is a market-based incentive mechanism to promote energy efficiency. The purpose of this work is to address the challenges inherent to inconsistent representation of business processes, and interoperability issues in PAT like cap-and-trade mechanisms especially when scaled. Studies by various agencies have highlighted that as the mechanism evolves including more industrial sectors and industries in its ambit, implementation will become more challenging. This paper analyses the major needs of PAT (namely tracking, monitoring, auditing & verifying energy-saving reports, and providing technical support & guidance to stakeholders); and how the aforesaid reasons affect them. Though current technologies can handle these challenges to an extent, standardization activities for implementation have been scanty for PAT and this work attempts to evolve them. The inconsistent modification of business processes, rules, and procedures across stakeholders, and interoperability among heterogeneous systems are addressed. This paper proposes the adoption of specifically two standards into PAT, namely Business Process Model and Notation for maintaining consistency in business process modelling, and Common Information Model (IEC 61970, 61968, 62325 combined) for information exchange. Detailed architecture and organization of these adoptions are reported. The work can be used by PAT implementing agencies, stakeholders, and standardization bodies.

Evolving Applications, Technological Challenges and Future Opportunities in Neuromodulation: Proceedings of the Fifth Annual Deep Brain Stimulation Think Tank.

PubMed

Ramirez-Zamora, Adolfo; Giordano, James J; Gunduz, Aysegul; Brown, Peter; Sanchez, Justin C; Foote, Kelly D; Almeida, Leonardo; Starr, Philip A; Bronte-Stewart, Helen M; Hu, Wei; McIntyre, Cameron; Goodman, Wayne; Kumsa, Doe; Grill, Warren M; Walker, Harrison C; Johnson, Matthew D; Vitek, Jerrold L; Greene, David; Rizzuto, Daniel S; Song, Dong; Berger, Theodore W; Hampson, Robert E; Deadwyler, Sam A; Hochberg, Leigh R; Schiff, Nicholas D; Stypulkowski, Paul; Worrell, Greg; Tiruvadi, Vineet; Mayberg, Helen S; Jimenez-Shahed, Joohi; Nanda, Pranav; Sheth, Sameer A; Gross, Robert E; Lempka, Scott F; Li, Luming; Deeb, Wissam; Okun, Michael S

2017-01-01

The annual Deep Brain Stimulation (DBS) Think Tank provides a focal opportunity for a multidisciplinary ensemble of experts in the field of neuromodulation to discuss advancements and forthcoming opportunities and challenges in the field. The proceedings of the fifth Think Tank summarize progress in neuromodulation neurotechnology and techniques for the treatment of a range of neuropsychiatric conditions including Parkinson's disease, dystonia, essential tremor, Tourette syndrome, obsessive compulsive disorder, epilepsy and cognitive, and motor disorders. Each section of this overview of the meeting provides insight to the critical elements of discussion, current challenges, and identified future directions of scientific and technological development and application. The report addresses key issues in developing, and emphasizes major innovations that have occurred during the past year. Specifically, this year's meeting focused on technical developments in DBS, design considerations for DBS electrodes, improved sensors, neuronal signal processing, advancements in development and uses of responsive DBS (closed-loop systems), updates on National Institutes of Health and DARPA DBS programs of the BRAIN initiative, and neuroethical and policy issues arising in and from DBS research and applications in practice.

Access Barriers to Distance Education Perceived by Inservice and Preservice Career and Technical Education Majors.

ERIC Educational Resources Information Center

Zirkle, Chris

The access barriers to distance education faced by inservice and preservice career and technical education (CTE) majors were examined through a survey of 76 students enrolled in undergraduate- and graduate-level CTE education programs. Completed questionnaires were received from 60 students (response rate, 78.9%). Forty respondents worked…

Vocational-Technical Education; A Prospectus for Change.

ERIC Educational Resources Information Center

Schaefer, Carl J., Ed.; Kaufman, Jacob J., Ed.

To seek resolution of problems in providing education for youth and adults oriented toward the world of work, the Massachusetts Advisory Council on Education (MACE) undertook a study of vocational-technical education as a major project. This publication contains the major papers and prepared reactions to these papers, which were presented at a…

Climate Change Challenges for Extension Educators: Technical Capacity and Cultural Attitudes

ERIC Educational Resources Information Center

Becerra, Terrie A.; Middendorf, Gerad; Campbell, Amber; Tomlinson, Peter

2016-01-01

We surveyed Extension educators in the southern Great Plains about their attitudes and beliefs regarding climate change, their interactions with constituents surrounding climate change, and challenges they face in engaging constituents on the topic of climate change. Production-oriented and sociocultural challenges in meeting constituents'…

Survey of Dust Issues for Lunar Seals and the RESOLVE Project

NASA Technical Reports Server (NTRS)

Proctor, Margaret P.; Dempsey, Paula

2006-01-01

Lunar dust poses a technical challenge for sealing applications on the moon. A survey of seals used in Apollo lunar missions is presented as well as lunar soil characteristics and a description of the lunar environment. Seal requirements and technical challenges for the volatiles characterization oven and hydrogen reduction reaction chamber of the RESOLVE project are discussed. The purpose of the RESOLVE project is to find water or ice in lunar soil and demonstrate the ability to produce water, and hence oxygen and hydrogen, from lunar regolith for life support and propellants.

Establishing ecological and social continuities: new challenges to optimize urban watershed management

NASA Astrophysics Data System (ADS)

Mitroi, V.; de Coninck, A.; Vinçon-Leite, B.; Deroubaix, J.-F.

2014-09-01

The (re)construction of the ecological continuity is stated as one of the main objectives of the European Water Framework Directive for watershed management in Europe. Analysing the social, political, technical and scientific processes characterising the implementation of different projects of ecological continuity in two adjacent peri-urban territories in Ile-de-France, we observed science-driven approaches disregarding the social contexts. We show that, in urbanized areas, ecological continuity requires not only important technical and ecological expertise, but also social and political participation to the definition of a common vision and action plan. Being a challenge for both, technical water management institutions and "classical" ecological policies, we propose some social science contributions to deal with ecological unpredictability and reconsider stakeholder resistance to this kind of project.

Planning for planetary protection : challenges beyond Mars

NASA Technical Reports Server (NTRS)

Belz, Andrea P.; Cutts, James A.

2006-01-01

This document summarizes the technical challenges to planetary protection for these targets of interest and outlines some of the considerations, particularly at the system level, in designing an appropriate technology investment strategy for targets beyond Mars.

Machine learning challenges in Mars rover traverse science

NASA Technical Reports Server (NTRS)

Castano, R.; Judd, M.; Anderson, R. C.; Estlin, T.

2003-01-01

The successful implementation of machine learning in autonomous rover traverse science requires addressing challenges that range from the analytical technical realm, to the fuzzy, philosophical domain of entrenched belief systems within scientists and mission managers.

IT Labs Proof-of-Concept Project: Technical Data Interoperability (TDI) Pathfinder Via Emerging Standards

NASA Technical Reports Server (NTRS)

Conroy, Mike; Gill, Paul; Ingalls, John; Bengtsson, Kjell

2014-01-01

No known system is in place to allow NASA technical data interoperability throughout the whole life cycle. Life Cycle Cost (LCC) will be higher on many developing programs if action isn't taken soon to join disparate systems efficiently. Disparate technical data also increases safety risks from poorly integrated elements. NASA requires interoperability and industry standards, but breaking legacy ways is a challenge.

Up to the Challenge: The Role of Career and Technical Education and 21st Century Skills in College and Career Readiness

ERIC Educational Resources Information Center

Partnership for 21st Century Skills, 2010

2010-01-01

This report highlights the demand for skills in the global economy and the ways in which educators can meet this demand by drawing on both career and technical education and the Partnership for 21st Century Skills' Framework for 21st Century Learning. Twenty-first century skills and career and technical education are essential in every state,…

The interactive systems framework applied to the strategic prevention framework: the Rhode Island experience.

PubMed

Florin, Paul; Friend, Karen B; Buka, Stephen; Egan, Crystelle; Barovier, Linda; Amodei, Brenda

2012-12-01

The Interactive Systems Framework for Dissemination and Implementation (ISF) was introduced as a heuristic systems level model to help bridge the gap between research and practice (Wandersman et al., in Am J Commun Psychol 41:171-181, 2008). This model describes three interacting systems with distinct functions that (1) distill knowledge to develop innovations; (2) provide supportive training and technical assistance for dissemination to; (3) a prevention delivery system responsible for implementation in the field. The Strategic Prevention Framework (SPF) is a major prevention innovation launched by the Center for Substance Abuse Prevention (CSAP) of the Substance Abuse and Mental Health Services Administration (SAMHSA). The SPF offers a structured, sequential, data-driven approach that explicitly targets environmental conditions in the community and aims for change in substance use and problems at the population level. This paper describes how the ISF was applied to the challenges of implementing the SPF in 14 Rhode Island communities, with a focus on the development of a new Training and Technical Assistance Resources Center to support SPF efforts. More specifically, we (1) describe each of the three ISF interacting systems as they evolved in Rhode Island; (2) articulate the lines of communication between the three systems; and (3) examine selected evaluation data to understand relationships between training and technical assistance and SPF implementation and outcomes.

Coupled plasma filtration adsorption: rationale, technical development and early clinical experience.

PubMed

Ronco, Claudio; Brendolan, Alessandra; d'Intini, Vincenzo; Ricci, Zaccaria; Wratten, Mary Lou; Bellomo, Rinaldo

2003-01-01

The adjuvant treatment of sepsis remains a major therapeutic challenge. Blood purification is theoretically appealing if the humoral theory of sepsis is accepted as the basis for intervention. In this setting, blood purification would provide a broad-based restoration of humoral homeostasis thereby avoiding both excessive inflammation and counterinflammation. Several techniques of blood purification have been tried or are under active investigation. One of these is the so-called coupled plasma filtration adsorption (CPFA). CPFA is a novel extracorporeal blood purification therapy aimed at nonselectively reducing the circulating levels and activities of both pro- and anti-inflammatory mediators during sepsis and multiorgan failure. In vitro studies have shown CPFA to be effective in binding a broad range of such mediators proving its technical efficacy. Subsequent animal models have shown a beneficial effect on survival in endotoxemia. These studies have provided the necessary technical developments and biologic rationale for initial human studies. Two phase I/IIa clinical studies have now been performed. Both studies have shown that CPFA improves blood pressure and restores immune function in patients with severe sepsis and multiorgan dysfunction. In this article, we will discuss some of the basic principles involved in sorbent technology, and how these may contribute to treatment efficacy, review animal experiments with CPFA and finally discuss the results of recent human studies and their implications. Copyright 2003 S. Karger AG, Basel

VLT/I Instrumentation: Lessons Learned FORUM

NASA Astrophysics Data System (ADS)

Monnet, G.; Bacon, R.

2003-09-01

This paper is the result of a joint effort by ESO and its Scientific and Technical Committee (STC) to extract the main lessons from last April's 'VLT/VLTI Instrumentation: Lessons learned' Forum and start applying them, in particular in the framework of the development of second generation VLT -and soon VLTI- instruments. This is but one step in a continuing effort to optimize these complex and challenging developments which involve a significant fraction of Europe's astronomical instrument builders in the near-UV to mid-IR range. With a major effort in the European radio community to build multiple receiver systems for ALMA now being pursued at an accelerated pace, it was also vital to revisit very quickly our whole procurement strategy in this area.

A subperiosteal maxillary implant causing severe osteolysis.

PubMed

Maï, Nguyen Tan; Jean-Baptiste, Caruhel; Hossein, Khonsari Roman

2018-06-22

Subperiosteal implant denture therapy was initially introduced in 1942 in Sweden and was then used worldwide for the treatment of fully edentulous maxillary or mandibular arches with advanced bone atrophy. Most authors describe decent success rates for mandibular subperiosteal implants in cases with major bone atrophy but follow-up studies for maxillary subperiosteal implants are not available. Here, we report a case of severe maxillary osteolysis secondary to the placement of a subperiosteal in-house implant. Subperiosteal implants are rarely used today but patients still carrying these devices with severe complications can be challenging to manage. New technical advances, including the use of surgical planification and additive manufacturing, may lead to a new interest in subperiosteal implants. Copyright © 2018. Published by Elsevier Masson SAS.

Text mining patents for biomedical knowledge.

PubMed

Rodriguez-Esteban, Raul; Bundschus, Markus

2016-06-01

Biomedical text mining of scientific knowledge bases, such as Medline, has received much attention in recent years. Given that text mining is able to automatically extract biomedical facts that revolve around entities such as genes, proteins, and drugs, from unstructured text sources, it is seen as a major enabler to foster biomedical research and drug discovery. In contrast to the biomedical literature, research into the mining of biomedical patents has not reached the same level of maturity. Here, we review existing work and highlight the associated technical challenges that emerge from automatically extracting facts from patents. We conclude by outlining potential future directions in this domain that could help drive biomedical research and drug discovery. Copyright © 2016 Elsevier Ltd. All rights reserved.

Mars Atmospheric Characterization Using Advanced 2-Micron Orbiting Lidar

NASA Technical Reports Server (NTRS)

Singh, U.; Engelund, W.; Refaat, T.; Kavaya, M.; Yu, J.; Petros, M.

2015-01-01

Mars atmospheric characterization is critical for exploring the planet. Future Mars missions require landing massive payloads to the surface with high accuracy. The accuracy of entry, descent and landing (EDL) of a payload is a major technical challenge for future Mars missions. Mars EDL depends on atmospheric conditions such as density, wind and dust as well as surface topography. A Mars orbiting 2-micron lidar system is presented in this paper. This advanced lidar is capable of measuring atmospheric pressure and temperature profiles using the most abundant atmospheric carbon dioxide (CO2) on Mars. In addition Martian winds and surface altimetry can be mapped, independent of background radiation or geographical location. This orbiting lidar is a valuable tool for developing EDL models for future Mars missions.

Application of Game Theory Approaches in Routing Protocols for Wireless Networks

NASA Astrophysics Data System (ADS)

Javidi, Mohammad M.; Aliahmadipour, Laya

2011-09-01

An important and essential issue for wireless networks is routing protocol design that is a major technical challenge due to the function of the network. Game theory is a powerful mathematical tool that analyzes the strategic interactions among multiple decision makers and the results of researches show that applied game theory in routing protocol lead to improvement the network performance through reduce overhead and motivates selfish nodes to collaborate in the network. This paper presents a review and comparison for typical representatives of routing protocols designed that applied game theory approaches for various wireless networks such as ad hoc networks, mobile ad hoc networks and sensor networks that all of them lead to improve the network performance.

Defining Operational Space Suit Requirements for Commercial Orbital Spaceflight

NASA Technical Reports Server (NTRS)

Alpert, Brian K.

2015-01-01

As the commercial spaceflight industry transitions from suborbital brevity to orbital outposts, spacewalking will become a major consideration for tourists, scientists, and hardware providers. The challenge exists to develop a space suit designed for the orbital commercial spaceflight industry. The unique needs and requirements of this industry will drive space suit designs and costs that are unlike any existing product. Commercial space tourists will pay for the experience of a lifetime, while scientists may not be able to rely on robotics for all operations and external hardware repairs. This study was aimed at defining space suit operational and functional needs across the spectrum of spacewalk elements, identifying technical design drivers and establishing appropriate options. Recommendations from the analysis are offered for consideration

Complex surgery for locally advanced bone and soft tissue sarcomas of the shoulder girdle.

PubMed

Lesenský, Jan; Mavrogenis, Andreas F; Igoumenou, Vasilios G; Matejovsky, Zdenek; Nemec, Karel; Papagelopoulos, Panayiotis J; Fabbri, Nicola

2017-08-01

Surgical management of primary musculoskeletal tumors of the shoulder girdle is cognitively and technically demanding. Over the last decades, advances in the medical treatments, imaging and surgical techniques have fostered limb salvage surgery and reduced the need for amputation. Despite well-accepted general principles, an individualized approach is often necessary to accommodate tumor extension, anatomical challenges and patient characteristics. A combination of techniques is often required to achieve optimal oncologic and durable functional outcome. Goal of this article is to review approach and management of patients with locally advanced sarcomas of the shoulder girdle requiring major tumor surgery, to illustrate principles of surgical strategy, outcome and complications, and to provide useful guidelines for the treating physicians.

Initial operation of high power ICRF system for long pulse in EAST

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qin, C. M., E-mail: chmq@ipp.ac.cn; Zhao, Y. P.; Zhang, X. J.

2015-12-10

The ICRF heating system on EAST upgraded by active cooling aims for long pulse operation. In this paper, the main technical features of the ICRF system are described. One of a major challenges for long pulse operation is RF-edge interactions induced impurity production and heat loading. In EAST, ICRF antenna protections and Faraday screen bars damaged due to LH electron beam are found. Preliminary results for the analysis of the interaction between LHCD and ICRF antenna are discussed. Increase of metal impurities in the plasma during RF pulse and in a larger core radiation are also shown. These RF-edge interactionsmore » at EAST and some preliminary results for the optimizing RF performance will be presented.« less

Challenges of Human Space Flight

NASA Technical Reports Server (NTRS)

Davis, Jeffrey R.; Charles, John B.

2006-01-01

The presentations will be given during the X-Prize symposium, exploring the multi-faceted dimensions of spaceflight ranging from the technical developments necessary to achieve safe routine flight to and from and through space to the new personal business opportunities and economic benefits that will open in space and here on Earth. The symposium will delve into the technical, regulatory, market and financial needs and challenges that must be met in charting and executing the incremental developments leading to Personal Spaceflight and the opening of a Place Called Space. The presentation covers facets of human space flight including descriptions of life in space, the challenges of delivering medical care in space, and the preparations needed for safe and productive human travel to the moon and Mars.

15 CFR 295.6 - Criteria for selection.

Code of Federal Regulations, 2011 CFR

2011-01-01

... proposal will be funded unless the Program determines that it has scientific and technological merit and... does not have an adequate technical and commercialization plan. (a) Scientific and technological merit... innovation, the technical approach, major technical hurdles, the attendant risks, and clearly establish...

Third Progress and Information Report of the Vocational-Technical Education Consortium of States.

ERIC Educational Resources Information Center

Lee, Connie W.; And Others

This description of major activities and accomplishments of the Vocational-Technical Education Consortium of the States (V-TECS) since the second progress report of May, 1975, is designed to provide the reader with a basic understanding of the processes and procedures used by the consortium in achieving its major goal: The production of catalogs…

Demographics, Interests, and Quality of Life of Canadian Neurosurgery Residents.

PubMed

Iorio-Morin, Christian; Ahmed, Syed Uzair; Bigder, Mark; Dakson, Ayoub; Elliott, Cameron; Guha, Daipayan; Kameda-Smith, Michelle; Lavergne, Pascal; Makarenko, Serge; Taccone, Michael S; Tso, Michael K; Wang, Bill; Winkler-Schwartz, Alexander; Fortin, David

2018-03-01

Neurosurgical residents face a unique combination of challenges, including long duty hours, technically challenging cases, and uncertain employment prospects. We sought to assess the demographics, interests, career goals, self-rated happiness, and overall well-being of Canadian neurosurgery residents. A cross-sectional survey was developed and sent through the Canadian Neurosurgery Research Collaborative to every resident enrolled in a Canadian neurosurgery program as of April 1, 2016. We analyzed 76 completed surveys of 146 eligible residents (52% response rate). The median age was 29 years, with 76% of respondents being males. The most popular subspecialties of interest for fellowship were spine, oncology, and open vascular neurosurgery. The most frequent self-reported number of worked hours per week was the 80- to 89-hour range. The majority of respondents reported a high level of happiness as well as stress. Sense of accomplishment and fatigue were reported as average to high and overall quality of life was low for 19%, average for 49%, and high for 32%. Satisfaction with work-life balance was average for 44% of respondents and was the only tested domain in which significant dissatisfaction was identified (18%). Overall, respondents were highly satisfied with their choice of specialty, choice of program, surgical exposure, and work environment; however, intimidation was reported in 36% of respondents and depression by 17%. Despite a challenging residency and high workload, the majority of Canadian neurosurgery residents are happy and satisfied with their choice of specialty and program. However, work-life balance, employability, resident intimidation, and depression were identified as areas of active concern.

The relevance of economic data in the decision-making process for orbital launch vehicle programs, a U.S. perspective

NASA Astrophysics Data System (ADS)

Hertzfeld, Henry R.; Williamson, Ray A.; Peter, Nicolas

2007-12-01

Over the past fifteen years, major U.S. initiatives for the development of new launch vehicles have been remarkably unsuccessful. The list is long: NLI, SLI, and X-33, not to mention several cancelled programs aimed at high speed airplanes (NASP, HSCT) which would share some similar technological problems. The economic aspects of these programs are equally as important to their success as are the technical aspects. In fact, by largely ignoring economic realities in the decisions to undertake these programs and in subsequent management decisions, space agencies (and their commercial partners) have inadvertently contributed to the eventual demise of these efforts. The transportation revolution that was envisaged by the promises of these programs has never occurred. Access to space is still very expensive; reliability of launch vehicles has remained constant over the years; and market demand has been relatively low, volatile and slow to develop. The changing international context of the industry (launching overcapacity, etc.) has also worked against the investment in new vehicles in the U.S. Today, unless there are unforeseen technical breakthroughs, orbital space access is likely to continue as it has been with high costs and market stagnation. Space exploration will require significant launching capabilities. The details of the future needs are not yet well defined. But, the question of the launch costs, the overall demand for vehicles, and the size and type of role that NASA will play in the overall launch market is likely to influence the industry. This paper will emphasize the lessons learned from the economic and management perspective from past launch programs, analyze the issues behind the demand for launches, and project the challenges that NASA will face as only one new customer in a very complex market situation. It will be important for NASA to make launch vehicle decisions based as much on economic considerations as it does on solving new technical challenges.

When a plant shuts down: The psychology of decommissioning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schulz, J.; Crawford, A.C.

Within the next decade, 10 to 25 nuclear plants in the United States may be taken off line. Many will have reached the end of their 40-year life cycles, but others will be retired because the cost of operating them has begun to outweigh their economic benefit. Such was the case at Fort St. Vrain, the first decommissioning of a US commercial plant under new Nuclear Regulatory Commission (NRC) regulations. Two major problems associated with decommissioning plants have been obvious: (1) the technical challenges and costs of decommissioning, and (2) the cost of maintaining and finally decommissioning a plant aftermore » a safe storage (SAFSTOR) period of approximately 60 years. What has received little attention is the challenge that affects not only the people who make a plant work, but the quality of the solutions to these problems: how to maintain effective organizational performance during the process of downsizing and decommissioning and/or SAFSTOR. The quality of technical solutions for closing a plant, as well as how successfully the decommissioning process is held within or below budget, will depend largely on how effectively the nuclear organization functions as a social unit. Technical and people issues are bound together. The difficulty is how to operate a plant effectively when plant personnel have no sense of long-term security. As the nuclear power industry matures and the pace for closing operating plants accelerates, the time has come to prepare for the widespread decommissioning of plants. The industry would be well served by conducting a selective, industry-wide evaluation of plants to assess its overall readiness for the decommissioning process. A decommissioning is not likely to be trouble free, but with a healthy appreciation for the human side of the process, it will undoubtedly go more smoothly than if approached as a matter of dismantling a machine.« less

How does decentralisation affect health sector planning and financial management? a case study of early effects of devolution in Kilifi County, Kenya.

PubMed

Tsofa, Benjamin; Molyneux, Sassy; Gilson, Lucy; Goodman, Catherine

2017-09-15

A common challenge for health sector planning and budgeting has been the misalignment between policies, technical planning and budgetary allocation; and inadequate community involvement in priority setting. Health system decentralisation has often been promoted to address health sector planning and budgeting challenges through promoting community participation, accountability, and technical efficiency in resource management. In 2010, Kenya passed a new constitution that introduced 47 semi-autonomous devolved county governments, and a substantial transfer of responsibility for healthcare from the central government to these counties. This study analysed the effects of this major political decentralization on health sector planning, budgeting and overall financial management at county level. We used a qualitative, case study design focusing on Kilifi County, and were guided by a conceptual framework which drew on decentralisation and policy analysis theories. Qualitative data were collected through document reviews, key informant interviews, and participant and non-participant observations conducted over an eighteen months' period. We found that the implementation of devolution created an opportunity for local level prioritisation and community involvement in health sector planning and budgeting hence increasing opportunities for equity in local level resource allocation. However, this opportunity was not harnessed due to accelerated transfer of functions to counties before county level capacity had been established to undertake the decentralised functions. We also observed some indication of re-centralisation of financial management from health facility to county level. We conclude by arguing that, to enhance the benefits of decentralised health systems, resource allocation, priority setting and financial management functions between central and decentralised units are guided by considerations around decision space, organisational structure and capacity, and accountability. In acknowledging the political nature of decentralisation polices, we recommend that health sector policy actors develop a broad understanding of the countries' political context when designing and implementing technical strategies for health sector decentralisation.

SOFIA: Stratospheric Observatory For Infrared Astronomy

NASA Technical Reports Server (NTRS)

Kunz, Nans; Bowers, Al

2007-01-01

This viewgraph presentation reviews the great astronomical observatories both space and land based that are now operational. It shows the history of the development of SOFIA, from its conception in 1986 through the contract awards in 1996 and through the planned first flight in 2007. The major components of the observatory are shown and there is a comparison of the SOFIA with the Kuiper Airborne Observatory (KAO), which is the direct predecessor to SOFIA. The development of the aft ramp of the KAO was developed as a result of the wind tunnel tests performed for SOFIA development. Further slides show the airborne observatory layout and the telescope's optical layout. Included are also vies of the 2.5 Meter effective aperture, and the major telescope's components. The presentations reviews the technical challenges encountered during the development of SOFIA. There are also slides that review the wind tunnel tests, and CFD modeling performed during the development of SOFIA. Closing views show many views of the airplane, and views of SOFIA.

Improvement of industrially important microbial strains by genome shuffling: Current status and future prospects.

PubMed

Magocha, Tinashe Archbold; Zabed, H; Yang, Miaomiao; Yun, Junhua; Zhang, Huanhuan; Qi, Xianghui

2018-06-01

The growing demand for biotechnological products against limited metabolic capacity of industrially used microorganisms has led to an increased interest on strain-improvement over the last several decades, which aimed to enhance metabolite yield, substrate uptake and tolerance of the strains. Among a few techniques of strain-improvement, genome shuffling is the most recent and promising approach used for rapid strain-improvement that can yield a new strain by combining whole genomes of multi-parental microorganisms using the principles of protoplast fusion. Genome shuffling has brought a major breakthrough in the strain-improvement concept as it is found to be effective and reliable for expressing complex phenotypes. This review will discuss the technical aspects and applications of genome shuffling for various industrial strains to present its current status and recent progress. In the concluding remarks, a summary will be presented focusing on the major challenges and future outlooks of this technology. Copyright © 2018 Elsevier Ltd. All rights reserved.

Technical Assistance | NREL

Science.gov Websites

Multi-Wind Heat Smart Grid Project. Advancing Energy Solutions in Alaska NREL provides analysis mission to transfer knowledge and innovation to solve the nation's energy challenges. The goal of this transportation energy efficiency and reduce transportation energy costs State Technical Assistance-solar market

Vertical Lift - Not Just For Terrestrial Flight

NASA Technical Reports Server (NTRS)

Young, Larry A

2000-01-01

Autonomous vertical lift vehicles hold considerable potential for supporting planetary science and exploration missions. This paper discusses several technical aspects of vertical lift planetary aerial vehicles in general, and specifically addresses technical challenges and work to date examining notional vertical lift vehicles for Mars, Titan, and Venus exploration.

Approach to the E-ELT dome and main structure challenges

NASA Astrophysics Data System (ADS)

Bilbao, Armando; Murga, Gaizka; Gómez, Celia; Llarena, Javier

2014-07-01

The E-ELT as a whole could be classified as an extremely challenging project. More precisely, it should be defined as an array of many different sub-challenges, which comprise technical, logistical and managerial matters. This paper reviews some of these critical challenges, in particular those related to the Dome and the Main Structure, suggesting ways to face them in the most pragmatic way possible. Technical challenges for the Dome and the Main Structure are mainly related to the need to upscale current design standards to an order of magnitude larger design. Trying a direct design escalation is not feasible; it would not work. A design effort is needed to cross hybridize current design standards with technologies coming from other different applications. Innovative design is therefore not a wish but a must. And innovative design comes along with design risk. Design risk needs to be tackled from two angles: on the one hand through thorough design validation analysis and on the other hand through extensive pre-assembly and testing. And, once again, full scale integrated pre-assembly and testing of extremely large subsystems is not always possible. Therefore, defining a comprehensive test plan for critical components, critical subsystems and critical subassemblies becomes essential. Logistical challenges are linked to the erection site. Cerro Armazones is a remote site and this needs to be considered when evaluating transport and erection requirements. But it is not only the remoteness of the site that needs to be considered. The size of both Dome and Main Structure require large construction cranes and a well defined erection plan taking into account pre-assembly strategies, limited plan area utilization, erection sequence, erection stability during intermediate stages and, very specifically, efficient coordination between the Dome and the Main Structure erection processes. Managerial issues pose another set of challenges in this project. Both the size of the project and its special technical characteristics require specific managerial skills. Due to the size of the project it becomes essential to effectively manage and integrate a large number of suppliers and fabricators, of very different nature and geographically distributed. Project management plans need to cope with this situation. Also, extensive on site activities require intensive on site organization in line with large construction management strategies. Finally, the technical edge of the project requires deep technical understanding at management level in order to be able to take sound strategic decisions throughout the project in terms of the overall project quality, cost and schedule.

In Translation: School Leaders Learning in and from Leadership Practice While Confronting Pressing Policy Challenges

ERIC Educational Resources Information Center

Drago-Severson, Eleanor; Maslin-Ostrowski, Patricia

2018-01-01

Background/Context: Worldwide, principals face enormous challenges while translating policies and mandates for which they are accountable into their mission and practice. While some of these school-level challenges are technical, many are adaptive (Heifetz), requiring leaders and those in their care to grow their cognitive and affective…

2017 Exploration Rover Challenge event.

NASA Image and Video Library

2017-03-03

2017 Exploration Rover Challenge events at the U.S. Space and Rocket Center in Huntsville, Alabama. High school and college students from around the U.S. and the world come together for this 2 day event which challenges them to compete for the fastest time as well as technical design of the actual rover itself.

48 CFR 207.106 - Additional requirements for major systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... of complete technical data packages. (viii) Periodic competitions for subsystem upgrades. (ix... Government to use technical data to competitively reprocure identical items or components of the system if... otherwise entitled to unlimited rights in technical data. (B) If the contracting officer makes a...

48 CFR 207.106 - Additional requirements for major systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... of complete technical data packages. (viii) Periodic competitions for subsystem upgrades. (ix... Government to use technical data to competitively reprocure identical items or components of the system if... otherwise entitled to unlimited rights in technical data. (B) If the contracting officer makes a...

48 CFR 207.106 - Additional requirements for major systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... of complete technical data packages. (viii) Periodic competitions for subsystem upgrades. (ix... Government to use technical data to competitively reprocure identical items or components of the system if... otherwise entitled to unlimited rights in technical data. (B) If the contracting officer makes a...

48 CFR 207.106 - Additional requirements for major systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... of complete technical data packages. (viii) Periodic competitions for subsystem upgrades. (ix... Government to use technical data to competitively reprocure identical items or components of the system if... otherwise entitled to unlimited rights in technical data. (B) If the contracting officer makes a...

48 CFR 207.106 - Additional requirements for major systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... of complete technical data packages. (viii) Periodic competitions for subsystem upgrades. (ix... Government to use technical data to competitively reprocure identical items or components of the system if... otherwise entitled to unlimited rights in technical data. (B) If the contracting officer makes a...

Basic Research Needs for Carbon Capture: Beyond 2020

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alivisatos, Paul; Buchanan, Michelle

2010-03-04

This report is based on a SC/FE workshop on Carbon Capture: Beyond 2020, held March 4–5, 2010, to assess the basic research needed to address the current technical bottlenecks in carbon capture processes and to identify key research priority directions that will provide the foundations for future carbon capture technologies. The problem of thermodynamically efficient and scalable carbon capture stands as one of the greatest challenges for modern energy researchers. The vast majority of US and global energy use derives from fossil fuels, the combustion of which results in the emission of carbon dioxide into the atmosphere. These anthropogenic emissionsmore » are now altering the climate. Although many alternatives to combustion are being considered, the fact is that combustion will remain a principal component of the global energy system for decades to come. Today’s carbon capture technologies are expensive and cumbersome and energy intensive. If scientists could develop practical and cost-effective methods to capture carbon, those methods would at once alter the future of the largest industry in the world and provide a technical solution to one of the most vexing problems facing humanity. The carbon capture problem is a true grand challenge for today’s scientists. Postcombustion CO2 capture requires major new developments in disciplines spanning fundamental theoretical and experimental physical chemistry, materials design and synthesis, and chemical engineering. To start with, the CO2 molecule itself is thermodynamically stable and binding to it requires a distortion of the molecule away from its linear and symmetric arrangement. This binding of the gas molecule cannot be too strong, however; the sheer quantity of CO2 that must be captured ultimately dictates that the capture medium must be recycled over and over. Hence the CO2 once bound, must be released with relatively little energy input. Further, the CO2 must be rapidly and selectively pulled out of a mixture that contains many other gaseous components. The related processes of precombustion capture and oxycombustion pose similar challenges. It is this nexus of high-speed capture with high selectivity and minimal energy loss that makes this a true grand challenge problem, far beyond any of today’s artificial molecular manipulation technologies, and one whose solution will drive the advancement of molecular science to a new level of sophistication. We have only to look to nature, where such chemical separations are performed routinely, to imagine what may be achieved. The hemoglobin molecule transports oxygen in the blood rapidly and selectively and releases it with minimal energy penalty. Despite our improved understanding of how this biological system works, we have yet to engineer a molecular capture system that uses the fundamental cooperativity process that lies at the heart of the functionality of hemoglobin. While such biological examples provide inspiration, we also note that newly developed theoretical and computational capabilities; the synthesis of new molecules, materials, and membranes; and the remarkable advances in characterization techniques enabled by the Department of Energy’s measurement facilities all create a favorable environment for a major new basic research push to solve the carbon capture problem within the next decade. The Department of Energy has established a comprehensive strategy to meet the nation’s needs in the carbon capture arena. This framework has been developed following a series of workshops that have engaged all the critical stakeholder communities. The strategy that has emerged is based upon a tiered approach, with Fossil Energy taking the lead in a series of applied research programs that will test and extend our current systems. ARPA-E (Advanced Research Projects Agency–Energy) is supporting potential breakthroughs based upon innovative proposals to rapidly harness today’s technical capabilities in ways not previously considered. These needs and plans have been well summarized in the report from a recent workshop—Carbon Capture 2020, held in October 5 and 6, 2009—focused on near-term strategies for carbon capture improvements (http://www.netl.doe.gov/publications/ proceedings/09/CC2020/pdfs/Richards_Summary.pdf ). Yet the fact remains that when the carbon capture problem is looked at closely, we see today’s technologies fall far short of making carbon capture an economically viable process. This situation reinforces the need for a parallel, intensive use-inspired basic research effort to address the problem. This was the overwhelming conclusion of a recent workshop—Carbon Capture: Beyond 2020, held March 4 and 5, 2010—and is the subject of the present report. To prepare for the second workshop, an in-depth assessment of current technologies for carbon capture was conducted; the result of this study was a factual document, Technology and Applied R&D Needs for Carbon Capture: Beyond 2020. This document, which was prepared by experts in current carbon capture processes, also summarized the technological gaps or bottlenecks that limit currently available carbon capture technologies. The report considered the separation processes needed for all three CO2 emission reduction strategies—postcombustion, precombustion, and oxycombustion—and assessed three primary separation technologies based on liquid absorption, membranes, and solid adsorption. The workshop “Carbon Capture: Beyond 2020” convened approximately 80 attendees from universities, national laboratories, and industry to assess the basic research needed to address the current technical bottlenecks in carbon capture processes and to identify key research priority directions that will provide the foundations for future carbon capture technologies. The workshop began with a plenary session including speakers who summarized the extent of the carbon capture challenge, the various current approaches, and the limitations of these technologies. Workshop attendees were then given the charge to identify high-priority basic research directions that could provide revolutionary new concepts to form the basis for separation technologies in 2020 and beyond. The participants were divided into three major panels corresponding to different approaches for separating gases to reduce carbon emissions—liquid absorption, solid adsorption, and membrane separations. Two other panels were instructed to attend each of these three technology panels to assess crosscutting issues relevant to characterization and computation. At the end of the workshop, a final plenary session was convened to summarize the most critical research needs identified by the workshop attendees in each of the three major technical panels and from the two cross-cutting panels. The reports of the three technical panels included a set of high level Priority Research Directions meant to serve as inspiration to researchers in multiple disciplines—materials science, chemistry, biology, computational science, engineering, and others—to address the huge scientific challenges facing this nation and the world as we seek technologies for large-scale carbon capture beyond 2020. These Priority Research Directions were clustered around three main areas, all tightly coupled: Understand and control the dynamic atomic-level and molecular-level interactions of the targeted species with the separation media. Discover and design new materials that incorporate designed structures and functionalities tuned for optimum separation properties. Tailor capture/release processes with alternative driving forces, taking advantage of a new generation of materials. In each of the technical panels, the participants identified two major crosscutting research themes. The first was the development of new analytical tools that can characterize materials structure and molecular processes across broad spatial and temporal scales and under realistic conditions that mimic those encountered in actual separation processes. Such tools are needed to examine interfaces and thin films at the atomic and molecular levels, achieving an atomic/molecular-scale understanding of gas–host structures, kinetics, and dynamics, and understanding and control of nanoscale synthesis in multiple dimensions. A second major crosscutting theme was the development of new computational tools for theory, modeling, and simulation of separation processes. Computational techniques can be used to elucidate mechanisms responsible for observed separations, predict new desired features for advanced separations materials, and guide future experiments, thus complementing synthesis and characterization efforts. These two crosscut areas underscored the fact that the challenge for future carbon capture technologies will be met only with multidisciplinary teams of scientists and engineers. In addition, it was noted that success in this fundamental research area must be closely coupled with successful applied research to ensure the continuing assessment and maturation of new technologies as they undergo scale-up and deployment. Carbon capture is a very rich scientific problem, replete with opportunity for basic researchers to advance the frontiers of science as they engage on one of the most important technical challenges of our times. This workshop report outlines an ambitious agenda for addressing the very difficult problem of carbon capture by creating foundational new basic science. This new science will in turn pave the way for many additional advances across a broad range of scientific disciplines and technology sectors.« less

Core Noise Reduction

NASA Technical Reports Server (NTRS)

Hultgren, Lennart S.

2011-01-01

This presentation is a technical summary of and outlook for NASA-internal and NASA-sponsored external research on core (combustor and turbine) noise funded by the Fundamental Aeronautics Program Subsonic Fixed Wing (SFW) Project. Sections of the presentation cover: the SFW system-level noise metrics for the 2015, 2020, and 2025 timeframes; turbofan design trends and their aeroacoustic implications; the emerging importance of core noise and its relevance to the SFW Reduce-Perceived-Noise Technical Challenge; and the current research activities in the core noise area. Recent work1 on the turbine-transmission loss of combustor noise is briefly described, two2,3 new NRA efforts in the core-noise area are outlined, and an effort to develop CMC-based acoustic liners for broadband noise reduction suitable for turbofan-core application is delineated. The NASA Fundamental Aeronautics Program has the principal objective of overcoming today's national challenges in air transportation. The reduction of aircraft noise is critical to enabling the anticipated large increase in future air traffic. The Subsonic Fixed Wing Project's Reduce-Perceived-Noise Technical Challenge aims to develop concepts and technologies to dramatically reduce the perceived aircraft noise outside of airport boundaries.

DOE Advanced Scientific Computing Advisory Subcommittee (ASCAC) Report: Top Ten Exascale Research Challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lucas, Robert; Ang, James; Bergman, Keren

2014-02-10

Exascale computing systems are essential for the scientific fields that will transform the 21st century global economy, including energy, biotechnology, nanotechnology, and materials science. Progress in these fields is predicated on the ability to perform advanced scientific and engineering simulations, and analyze the deluge of data. On July 29, 2013, ASCAC was charged by Patricia Dehmer, the Acting Director of the Office of Science, to assemble a subcommittee to provide advice on exascale computing. This subcommittee was directed to return a list of no more than ten technical approaches (hardware and software) that will enable the development of a systemmore » that achieves the Department's goals for exascale computing. Numerous reports over the past few years have documented the technical challenges and the non¬-viability of simply scaling existing computer designs to reach exascale. The technical challenges revolve around energy consumption, memory performance, resilience, extreme concurrency, and big data. Drawing from these reports and more recent experience, this ASCAC subcommittee has identified the top ten computing technology advancements that are critical to making a capable, economically viable, exascale system.« less

Assessment of the State-of-the-Art of System-Wide Safety and Assurance Technologies

NASA Technical Reports Server (NTRS)

Roychoudhury, Indranil; Reveley, Mary S.; Phojanamongkolkij, Nipa; Leone, Karen M.

2017-01-01

Since its initiation, the System-wide Safety Assurance Technologies (SSAT) Project has been focused on developing multidisciplinary tools and techniques that are verified and validated to ensure prevention of loss of property and life in NextGen and enable proactive risk management through predictive methods. To this end, four technical challenges have been listed to help realize the goals of SSAT, namely (i) assurance of flight critical systems, (ii) discovery of precursors to safety incidents, (iii) assuring safe human-systems integration, and (iv) prognostic algorithm design for safety assurance. The objective of this report is to provide an extensive survey of SSAT-related research accomplishments by researchers within and outside NASA to get an understanding of what the state-of-the-art is for technologies enabling each of the four technical challenges. We hope that this report will serve as a good resource for anyone interested in gaining an understanding of the SSAT technical challenges, and also be useful in the future for project planning and resource allocation for related research.

Aviation Trends Related to Atmospheric Environment Safety Technologies Project Technical Challenges

NASA Technical Reports Server (NTRS)

Reveley, Mary S.; Withrow, Colleen A.; Barr, Lawrence C.; Evans, Joni K.; Leone, Karen M.; Jones, Sharon M.

2014-01-01

Current and future aviation safety trends related to the National Aeronautics and Space Administration's Atmospheric Environment Safety Technologies Project's three technical challenges (engine icing characterization and simulation capability; airframe icing simulation and engineering tool capability; and atmospheric hazard sensing and mitigation technology capability) were assessed by examining the National Transportation Safety Board (NTSB) accident database (1989 to 2008), incidents from the Federal Aviation Administration (FAA) accident/incident database (1989 to 2006), and literature from various industry and government sources. The accident and incident data were examined for events involving fixed-wing airplanes operating under Federal Aviation Regulation (FAR) Parts 121, 135, and 91 for atmospheric conditions related to airframe icing, ice-crystal engine icing, turbulence, clear air turbulence, wake vortex, lightning, and low visibility (fog, low ceiling, clouds, precipitation, and low lighting). Five future aviation safety risk areas associated with the three AEST technical challenges were identified after an exhaustive survey of a variety of sources and include: approach and landing accident reduction, icing/ice detection, loss of control in flight, super density operations, and runway safety.

The Presidential Address to the Association for Career and Technical Education Research: Using Standards to Reform Teacher Preparation in Career and Technical Education--A Successful Reformation

ERIC Educational Resources Information Center

Whittington, M. Susie

2005-01-01

This article presents the presidential address at the annual conference of the Association for Career and Technical Education Research by M. Susie Whittington, ACTER President 2005. The purpose of the presidential address is to examine a current issue facing the profession, and pose challenges to the membership in the context of that issue. In her…

Technical Challenges for a Comprehensive Test Ban: A historical perspective to frame the future (Invited)

NASA Astrophysics Data System (ADS)

Wallace, T. C.

2013-12-01

In the summer of 1958 scientists from the Soviet block and the US allies met in Geneva to discuss what it would take to monitor a forerunner to a Comprehensive Test Ban Treaty at the 'Conference of Experts to Study the Possibility of Detecting Violations of a Possible Agreement on Suspension of Nuclear Tests'. Although armed with a limited resume of observations, the conference recommended a multi-phenomenology approach (air sampling, acoustics, seismic and electromagnetic) deployed it a network of 170 sites scattered across the Northern Hemisphere, and hypothesized a detection threshold of 1kt for atmospheric tests and 5kt for underground explosions. The conference recommendations spurred vigorous debate, with strong disagreement with the stated detection hypothesis. Nevertheless, the technical challenges posed lead to a very focused effort to improve facilities, methodologies and, most importantly, research and development on event detection, location and identification. In the ensuing 50 years the various challenges arose and were eventually 'solved'; these included quantifying yield determination to enter a Limited Threshold Test Ban, monitoring broad areas of emerging nuclear nations, and after the mid-1990s lowering the global detection threshold to sub-kiloton levels for underground tests. Today there is both an international monitoring regime (ie, the International Monitoring System, or IMS) and a group of countries that have their own national technical means (NTM). The challenges for the international regime are evolving; the IMS has established itself as a very credible monitoring system, but the demand of a CTBT to detect and identify a 'nuclear test' of diminished size (zero yield) poses new technical hurdles. These include signal processing and understanding limits of resolution, location accuracy, integration of heterogeneous data, and accurately characterizing anomalous events. It is possible to extrapolate past technical advances to predict what should be available by 2020; detection of coupled explosions to 100s of tons for all continental areas, as well as a probabilistic assessment of event identification.

Post-Secondary Occupational Education and the Energy Crisis.

ERIC Educational Resources Information Center

Riendeau, Albert J.

Many implications exist for postsecondary educational institutions in the challenge of arriving at a responsible solution to the energy problem. The intent of the Energy Materials Conservation Education Act of 1975 is to call for a commitment by educators (community colleges, technical institutes, and trade and technical schools) to: (1) help…

Evaluating Instructor Technology Integration in Community and Technical Colleges: A Performance Evaluation Matrix

ERIC Educational Resources Information Center

Del Favero, Marietta; Hinson, Janice M.

2007-01-01

The press for implementing technology based instructional delivery systems in community and technical colleges is well documented. Yet faculty face numerous challenges in integrating technology into instruction (AL-Bataineh & Brooks, 2003; Groves & Zemel, 2000; Khoury, 1997). Stimulating faculty ownership in technology, diffusion of technology use…

Definition of Intervener Services and Interveners in Educational Settings. Technical Report

ERIC Educational Resources Information Center

National Consortium on Deaf-Blindness, 2013

2013-01-01

This technical report synthesizes the process and information used by National Consortium on Deaf-Blindness (NCDB) in the development of a consistently applied definition of intervener services. It addresses challenges and questions, provides comparisons between interveners and paraprofessionals, and offers definitions, roles and concepts used by…

Parallels in Arts Education and CTE: Some Guiding Reflections

ERIC Educational Resources Information Center

Hull, Bradley J.

2010-01-01

Many forces shape the current national conversation regarding career and technical education (CTE). Perkins IV guides the discussion through concepts such as challenging academic and technical standards; high skill, high wage, or high demand occupations; and programs of study. Workforce development and training, the economic recession,…

48 CFR 227.7103-15 - Subcontractor rights in technical data.

Code of Federal Regulations, 2010 CFR

2010-10-01

... clauses at 252.227-7013, Rights in Technical Data—Noncommercial Items, and 252.227-7037, Validation of... subcontractor to transact directly with the Government matters relating to the validation of its asserted... contractor's agreement that the direct transaction of validation or challenge matters with subcontractors at...

Diving into Real World Challenges

ERIC Educational Resources Information Center

Saldana, Matt; Rodden, Leslie

2012-01-01

In this article, the authors discuss how educators can engage students in real world learning using their academic knowledge and technical skills. They describe how school districts have discovered that the world of robotics can help students use technical skills to solve simulated problems found in the real world, while understanding the…

Making Advanced Computer Science Topics More Accessible through Interactive Technologies

ERIC Educational Resources Information Center

Shao, Kun; Maher, Peter

2012-01-01

Purpose: Teaching advanced technical concepts in a computer science program to students of different technical backgrounds presents many challenges. The purpose of this paper is to present a detailed experimental pedagogy in teaching advanced computer science topics, such as computer networking, telecommunications and data structures using…

48 CFR 227.7103-15 - Subcontractor rights in technical data.

Code of Federal Regulations, 2011 CFR

2011-10-01

... clauses at 252.227-7013, Rights in Technical Data—Noncommercial Items, and 252.227-7037, Validation of... subcontractor to transact directly with the Government matters relating to the validation of its asserted... contractor's agreement that the direct transaction of validation or challenge matters with subcontractors at...

48 CFR 227.7103-15 - Subcontractor rights in technical data.

Code of Federal Regulations, 2013 CFR

2013-10-01

... clauses at 252.227-7013, Rights in Technical Data—Noncommercial Items, and 252.227-7037, Validation of... subcontractor to transact directly with the Government matters relating to the validation of its asserted... contractor's agreement that the direct transaction of validation or challenge matters with subcontractors at...

48 CFR 227.7103-15 - Subcontractor rights in technical data.

Code of Federal Regulations, 2012 CFR

2012-10-01

... clauses at 252.227-7013, Rights in Technical Data—Noncommercial Items, and 252.227-7037, Validation of... subcontractor to transact directly with the Government matters relating to the validation of its asserted... contractor's agreement that the direct transaction of validation or challenge matters with subcontractors at...

48 CFR 227.7103-15 - Subcontractor rights in technical data.

Code of Federal Regulations, 2014 CFR

2014-10-01

... clauses at 252.227-7013, Rights in Technical Data—Noncommercial Items, and 252.227-7037, Validation of... subcontractor to transact directly with the Government matters relating to the validation of its asserted... contractor's agreement that the direct transaction of validation or challenge matters with subcontractors at...

GREEN KIT: A MODULAR, VARIABLE APPLICATION SYSTEM FOR SUSTAINABLE COOLING

EPA Science Inventory

Definition of technical challenge to sustainability One of the challenges to sustainability is to build shelters that provide human comfort (people) using limited resources (prosperity) and minimum environment impact (planet). Current practices in building ...

WASTE TO VALUE: INCORPORATING INDUSTRIAL SYMBIOSIS FOR SUSTAINABLE INFRASTRUCTURE

EPA Science Inventory

Technical Challenge: Investigators will examine the role of technology innovations as well as environmental justice (EJ) obligations in initiating and implementing urban-industrial symbiosis in Commerce City (CC), CO. The sustainability challenge invol...

Genomics and breeding in food crops

USDA-ARS?s Scientific Manuscript database

Plant biology is in the midst of a revolution. The generation of tremendous volumes of sequence information introduce new technical challenges into plant biology and agriculture. The relatively new field of bioinformatics addresses these challenges by utilizing efficient data management strategies;...

Middlesex Community College Software Technical Writing Program.

ERIC Educational Resources Information Center

Middlesex Community Coll., Bedford, MA.

This document describes the Software Technical Writing Program at Middlesex Community College (Massachusetts). The program is a "hands-on" course designed to develop job-related skills in three major areas: technical writing, software, and professional skills. The program was originally designed in cooperation with the Massachusetts High…

Digital government and public health.

PubMed

Fountain, Jane E

2004-10-01

Digital government is typically defined as the production and delivery of information and services inside government and between government and the public using a range of information and communication technologies. Two types of government relationships with other entities are government-to-citizen and government-to-government relationships. Both offer opportunities and challenges. Assessment of a public health agency's readiness for digital government includes examination of technical, managerial, and political capabilities. Public health agencies are especially challenged by a lack of funding for technical infrastructure and expertise, by privacy and security issues, and by lack of Internet access for low-income and marginalized populations. Public health agencies understand the difficulties of working across agencies and levels of government, but the development of new, integrated e-programs will require more than technical change - it will require a profound change in paradigm.

15 CFR 295.6 - Criteria for selection.

Code of Federal Regulations, 2010 CFR

2010-01-01

... innovation, the technical approach, major technical hurdles, the attendant risks, and clearly establish... project and project's organizational structure and management plan, including the extent to which...

Hierarchical event selection for video storyboards with a case study on snooker video visualization.

PubMed

Parry, Matthew L; Legg, Philip A; Chung, David H S; Griffiths, Iwan W; Chen, Min

2011-12-01

Video storyboard, which is a form of video visualization, summarizes the major events in a video using illustrative visualization. There are three main technical challenges in creating a video storyboard, (a) event classification, (b) event selection and (c) event illustration. Among these challenges, (a) is highly application-dependent and requires a significant amount of application specific semantics to be encoded in a system or manually specified by users. This paper focuses on challenges (b) and (c). In particular, we present a framework for hierarchical event representation, and an importance-based selection algorithm for supporting the creation of a video storyboard from a video. We consider the storyboard to be an event summarization for the whole video, whilst each individual illustration on the board is also an event summarization but for a smaller time window. We utilized a 3D visualization template for depicting and annotating events in illustrations. To demonstrate the concepts and algorithms developed, we use Snooker video visualization as a case study, because it has a concrete and agreeable set of semantic definitions for events and can make use of existing techniques of event detection and 3D reconstruction in a reliable manner. Nevertheless, most of our concepts and algorithms developed for challenges (b) and (c) can be applied to other application areas. © 2010 IEEE

Analysis of Aviation Safety Reporting System Incident Data Associated With the Technical Challenges of the Vehicle Systems Safety Technology Project

NASA Technical Reports Server (NTRS)

Withrow, Colleen A.; Reveley, Mary S.

2014-01-01

This analysis was conducted to support the Vehicle Systems Safety Technology (VSST) Project of the Aviation Safety Program (AVsP) milestone VSST4.2.1.01, "Identification of VSST-Related Trends." In particular, this is a review of incident data from the NASA Aviation Safety Reporting System (ASRS). The following three VSST-related technical challenges (TCs) were the focus of the incidents searched in the ASRS database: (1) Vechicle health assurance, (2) Effective crew-system interactions and decisions in all conditions; and (3) Aircraft loss of control prevention, mitigation, and recovery.

DCE-MRI, DW-MRI, and MRS in Cancer: Challenges and Advantages of Implementing Qualitative and Quantitative Multi-parametric Imaging in the Clinic

PubMed Central

Winfield, Jessica M.; Payne, Geoffrey S.; Weller, Alex; deSouza, Nandita M.

2016-01-01

Abstract Multi-parametric magnetic resonance imaging (mpMRI) offers a unique insight into tumor biology by combining functional MRI techniques that inform on cellularity (diffusion-weighted MRI), vascular properties (dynamic contrast-enhanced MRI), and metabolites (magnetic resonance spectroscopy) and has scope to provide valuable information for prognostication and response assessment. Challenges in the application of mpMRI in the clinic include the technical considerations in acquiring good quality functional MRI data, development of robust techniques for analysis, and clinical interpretation of the results. This article summarizes the technical challenges in acquisition and analysis of multi-parametric MRI data before reviewing the key applications of multi-parametric MRI in clinical research and practice. PMID:27748710

Conceptual study of superconducting urban area power systems

NASA Astrophysics Data System (ADS)

Noe, Mathias; Bach, Robert; Prusseit, Werner; Willén, Dag; Gold-acker, Wilfried; Poelchau, Juri; Linke, Christian

2010-06-01

Efficient transmission, distribution and usage of electricity are fundamental requirements for providing citizens, societies and economies with essential energy resources. It will be a major future challenge to integrate more sustainable generation resources, to meet growing electricity demand and to renew electricity networks. Research and development on superconducting equipment and components have an important role to play in addressing these challenges. Up to now, most studies on superconducting applications in power systems have been concentrated on the application of specific devices like for example cables and current limiters. In contrast to this, the main focus of our study is to show the consequence of a large scale integration of superconducting power equipment in distribution level urban power systems. Specific objectives are to summarize the state-of-the-art of superconducting power equipment including cooling systems and to compare the superconducting power system with respect to energy and economic efficiency with conventional solutions. Several scenarios were considered starting from the replacement of an existing distribution level sub-grid up to a full superconducting urban area distribution level power system. One major result is that a full superconducting urban area distribution level power system could be cost competitive with existing solutions in the future. In addition to that, superconducting power systems offer higher energy efficiency as well as a number of technical advantages like lower voltage drops and improved stability.

Natural product-based amyloid inhibitors.

PubMed

Velander, Paul; Wu, Ling; Henderson, Frances; Zhang, Shijun; Bevan, David R; Xu, Bin

2017-09-01

Many chronic human diseases, including multiple neurodegenerative diseases, are associated with deleterious protein aggregates, also called protein amyloids. One common therapeutic strategy is to develop protein aggregation inhibitors that can slow down, prevent, or remodel toxic amyloids. Natural products are a major class of amyloid inhibitors, and several dozens of natural product-based amyloid inhibitors have been identified and characterized in recent years. These plant- or microorganism-extracted compounds have shown significant therapeutic potential from in vitro studies as well as in vivo animal tests. Despite the technical challenges of intrinsic disordered or partially unfolded amyloid proteins that are less amenable to characterizations by structural biology, a significant amount of research has been performed, yielding biochemical and pharmacological insights into how inhibitors function. This review aims to summarize recent progress in natural product-based amyloid inhibitors and to analyze their mechanisms of inhibition in vitro. Major classes of natural product inhibitors and how they were identified are described. Our analyses comprehensively address the molecular interactions between the inhibitors and relevant amyloidogenic proteins. These interactions are delineated at molecular and atomic levels, which include covalent, non-covalent, and metal-mediated mechanisms. In vivo animal studies and clinical trials have been summarized as an extension. To enhance natural product bioavailability in vivo, emerging work using nanocarriers for delivery has also been described. Finally, issues and challenges as well as future development of such inhibitors are envisioned. Copyright © 2017 Elsevier Inc. All rights reserved.

Natural product-based amyloid inhibitors

PubMed Central

Velander, Paul; Wu, Ling; Henderson, Frances; Zhang, Shijun; Bevan, David R.; Xu, Bin

2018-01-01

Many chronic human diseases, including multiple neurodegenerative diseases, are associated with deleterious protein aggregates, also called protein amyloids. One common therapeutic strategy is to develop protein aggregation inhibitors that can slow down, prevent, or remodel toxic amyloids. Natural products are a major class of amyloid inhibitors, and several dozens of natural product-based amyloid inhibitors have been identified and characterized in recent years. These plant- or microorganism-extracted compounds have shown significant therapeutic potential from in vitro studies as well as in vivo animal tests. Despite the technical challenges of intrinsic disordered or partially unfolded amyloid proteins that are less amenable to characterizations by structural biology, a significant amount of research has been performed, yielding biochemical and pharmacological insights into how inhibitors function. This review aims to summarize recent progress in natural product-based amyloid inhibitors and to analyze their mechanisms of inhibition in vitro. Major classes of natural product inhibitors and how they were identified are described. Our analyses comprehensively address the molecular interactions between the inhibitors and relevant amyloidogenic proteins. These interactions are delineated at molecular and atomic levels, which include covalent, non-covalent, and metal-mediated mechanisms. In vivo animal studies and clinical trials have been summarized as an extension. To enhance natural product bioavailability in vivo, emerging work using nanocarriers for delivery has also been described. Finally, issues and challenges as well as future development of such inhibitors are envisioned. PMID:28390938

The Boston Study: Analysis of a Major Metropolitan Business- and Technical-Communication Market.

ERIC Educational Resources Information Center

Buchholz, William J.

1989-01-01

Presents a year-long study of the duties, skills, and knowledge required of business- and technical-communication professionals in Boston, Massachusetts. Focuses on six categories of practice: technical communication, publishing, public relations, marketing, development, and training. Suggests that in the next decade communication practitioners…

A Taxonomy of Technical Assistance Skills.

ERIC Educational Resources Information Center

Ogden, Evelyn; Musumeci, Marilyn

To operationalize the Technical Assistance Brokerage System, the first major task called for the development of a taxonomy of training and technical assistance services specifying requisite skills and skill clusters by the dimensions of client type, stages of dissemination, and levels of experience. From a literature search approximately 400…

Centennial Challenges

NASA Image and Video Library

2010-02-26

Doug Comstock, NASA's Director, Innovative Partnership Office, speaks during a ceremony for winners and participants of NASA’s 2009 Centennial Challenges, Friday, Feb. 26, 2010, at NASA Headquarters in Washington. The year-long competition addresses a range of technical challenges that support NASA's missions in aeronautics and space with a goal of encouraging novel solutions from non-traditional sources. Photo Credit: (NASA/Paul E. Alers)

Challenges in Fingertip Replantation

PubMed Central

Kim, Jin-Soo; Yang, Jae-Won; Lee, Dong-Chul; Ki, Sae-Hwi; Roh, Si-Young

2013-01-01

Fingertip amputation is a challenging injury to manage. Among various reconstructive procedures, replantation results in superior outcome, but is seldom considered in many institutions. From the identification of vessel ends to reanastomosis of the submillimeter vessels, fingertip's highly specialized anatomy requires technical excellence. By addressing these anatomic challenges, fingertip replantation can be a routine reconstructive option for microvascular surgeons. PMID:24872765

Transesophageal echocardiography and intracardiac echocardiography differently predict potential technical challenges or failures of interatrial shunts catheter-based closure.

PubMed

Rigatelli, Gianluca; Rigateli, Gianluca; Cardaioli, Paolo; Braggion, Gabriele; Aggio, Silvio; Giordan, Massimo; Magro, Beatrice; Nascimben, Alberto; Favaro, Alberto; Roncon, Loris; Rincon, Loris

2007-02-01

We sought to prospectively assess the role of transesophageal (TEE) and intracardiac echocardiography (ICE) in detecting potential technical difficulties or failures in patients submitted to interatrial shunts percutaneous closure. We prospectively enrolled 46 consecutive patients (mean age 35+/-28, 8 years, 30 female) referred to our center for catheter-based closure of interatrial shunts. All patients were screened with TEE before the intervention. Patients who met the inclusion criteria underwent ICE study before the closure attempt (40 patients). TEE detected potential technical difficulties in 22.5% (9/40) patients, whereas ICE detected technical difficulties in 32.5% (13/40 patients). In patients with positive TEE/ICE the procedural success (92.4% versus 100% and, P = ns) and follow-up failure rate (7.7% versus 0%, P = ns) were similar to patients with negative TEE/ICE, whereas the fluoroscopy time (7 +/- 1.2 versus 5 +/- 0.7 minutes, P < 0.03), the procedural time (41 +/- 4.1 versus 30 +/- 8.2 minutes, P +/- 0.03), and technical difficulties rate (23.1% versus 0%, P = 0.013) were higher. Differences between ICE and TEE in the evaluation of rims, measurement of ASD or fossa ovalis, and detection of venous valve and embryonic septal membrane remnants impacted on technical challenges and on procedural and fluoroscopy times but did not influence the success rate and follow-up failure rate.

BI Project Success

ERIC Educational Resources Information Center

Tracey, Graham; Riha, James

2009-01-01

Managing business intelligence (BI) projects in higher education is a formidable responsibility that challenges even the most experienced technical project managers. Data source dependencies, uncertain data quality, changing information requirements, and urgency for actionable information are but a few examples among the multitude of challenges.…

The Asteroid Impact and Deflection Assessment Mission and its Potential Contributions to Human Exploration of Asteroids

NASA Technical Reports Server (NTRS)

Abell, Paul A.; Rivkin, Andy S.

2014-01-01

The joint ESA and NASA Asteroid Impact and Deflection Assessment (AIDA) mission will directly address aspects of NASA's Asteroid Initiative and will contribute to future human exploration. The NASA Asteroid Initiative is comprised of two major components: the Grand Challenge and the Asteroid Mission. The first component, the Grand Challenge, focuses on protecting Earth's population from asteroid impacts by detecting potentially hazardous objects with enough warning time to either prevent them from impacting the planet, or to implement civil defense procedures. The Asteroid Mission, involves sending astronauts to study and sample a near-Earth asteroid (NEA) prior to conducting exploration missions of the Martian system, which includes Phobos and Deimos. AIDA's primary objective is to demonstrate a kinetic impact deflection and characterize the binary NEA Didymos. The science and technical data obtained from AIDA will aid in the planning of future human exploration missions to NEAs and other small bodies. The dual robotic missions of AIDA, ESA's Asteroid Impact Monitor (AIM) and NASA's Double Asteroid Redirection Test (DART), will provide a great deal of technical and engineering data on spacecraft operations for future human space exploration while conducting in-depth scientific examinations of the binary target Didymos both prior to and after the kinetic impact demonstration. The knowledge gained from this mission will help identify asteroidal physical properties in order to maximize operational efficiency and reduce mission risk for future small body missions. The AIDA data will help fill crucial strategic knowledge gaps concerning asteroid physical characteristics that are relevant for human exploration considerations at similar small body destinations.

Visualization of uncertainties and forecast skill in user-tailored seasonal climate predictions for agriculture

NASA Astrophysics Data System (ADS)

Sedlmeier, Katrin; Gubler, Stefanie; Spierig, Christoph; Flubacher, Moritz; Maurer, Felix; Quevedo, Karim; Escajadillo, Yury; Avalos, Griña; Liniger, Mark A.; Schwierz, Cornelia

2017-04-01

Seasonal climate forecast products potentially have a high value for users of different sectors. During the first phase (2012-2015) of the project CLIMANDES (a pilot project of the Global Framework for Climate Services led by WMO [http://www.wmo.int/gfcs/climandes]), a demand study conducted with Peruvian farmers indicated a large interest in seasonal climate information for agriculture. The study further showed that the required information should by precise, timely, and understandable. In addition to the actual forecast, two complex measures are essential to understand seasonal climate predictions and their limitations correctly: forecast uncertainty and forecast skill. The former can be sampled by using an ensemble of climate simulations, the latter derived by comparing forecasts of past time periods to observations. Including uncertainty and skill information in an understandable way for end-users (who are often not technically educated) poses a great challenge. However, neglecting this information would lead to a false sense of determinism which could prove fatal to the credibility of climate information. Within the second phase (2016-2018) of the project CLIMANDES, one goal is to develop a prototype of a user-tailored seasonal forecast for the agricultural sector in Peru. In this local context, the basic education level of the rural farming community presents a major challenge for the communication of seasonal climate predictions. This contribution proposes different graphical presentations of climate forecasts along with possible approaches to visualize and communicate the associated skill and uncertainties, considering end users with varying levels of technical knowledge.

New and improved tuberculosis diagnostics: evidence, policy, practice, and impact.

PubMed

Pai, Madhukar; Minion, Jessica; Steingart, Karen; Ramsay, Andrew

2010-05-01

The aim is to summarize the evidence base for tuberculosis (TB) diagnostics, review recent policies on TB diagnostics, and discuss issues such as how evidence is translated into policy, limitations of the existing evidence base, and challenges involved in translating policies into impact. Case detection continues to be a major obstacle to global TB control. Fortunately, due to an unprecedented level of interest, funding, and activity, the new diagnostics pipeline for TB has rapidly expanded. There have been several new policies and guidelines on TB diagnostics. However, there are major gaps in the existing pipeline (e.g. lack of a point-of-care test) and the evidence base is predominantly made up of research studies of test accuracy. With the availability of new diagnostics and supporting policies, the next major step is translation of policy into practice. The impact of new tests will depend largely on the extent of their introduction and acceptance into the global public sector. This will itself depend in part on policy decisions by international technical agencies and national TB programs. With the engagement of all key stakeholders, we will need to translate evidence-based policies into epidemiological and public health impact.

Preparing Facilitators From Community-Based Organizations for Evidence-Based Intervention Training in Second Life

PubMed Central

Valladares, Angel Felix; Tschannen, Dana; Villarruel, Antonia Maria

2014-01-01

Background A major barrier to the use and scale-up of evidence-based interventions are challenges related to training and capacity building. A cost-effective and highly interactive multi-user virtual environment, Second Life (SL) is a promising alternative for comprehensive face-to-face facilitator training. Objective The purpose of this study was to examine the feasibility of using SL to train facilitators from community-based organizations to use ¡Cuídate! (Take Care of Yourself), one of the few evidence-based interventions developed and tested with Latino youth to reduce sexual risk behaviors. Methods We recruited 35 participants from community-based organizations throughout the United States to participate in the SL ¡Cuídate! Training of Facilitators. Preparation to use SL consisted of four phases: (1) recruitment and computer capacity screening, (2) enrollment, (3) orientation to the SL program, and (4) technical support throughout the synchronous training sessions. Technical difficulties, the associated cause, and the mitigation strategy implemented were recorded during each session. Participants completed evaluations including perceptions of self-efficacy and confidence to complete the necessary skills to participate in SL training. Results Overall, participants reported high levels of self-efficacy for all skills necessary to participate in SL training. Based on an 11-point scale (0-10), self-efficacy to download and access the software was rated the highest: mean 8.29 (SD 2.19). Interacting with items in SL had the lowest mean score: mean 7.49 (SD 2.89). The majority of technical difficulties experienced by participants were related to inadequate Internet connections or computer malfunctions. Conclusions Our findings support the feasibility of using SL for the ¡Cuídate! Training of Facilitators. The process used in this study to prepare participants to use SL can be used as a basis for other evidence-based intervention training in SL. This study is an important contribution to developing cost-effective and accessible training options for evidence-based interventions. PMID:25270991

Preparing facilitators from community-based organizations for evidence-based intervention training in Second Life.

PubMed

Valladares, Angel Felix; Aebersold, Michelle; Tschannen, Dana; Villarruel, Antonia Maria

2014-09-30

A major barrier to the use and scale-up of evidence-based interventions are challenges related to training and capacity building. A cost-effective and highly interactive multi-user virtual environment, Second Life (SL) is a promising alternative for comprehensive face-to-face facilitator training. The purpose of this study was to examine the feasibility of using SL to train facilitators from community-based organizations to use ¡Cuídate! (Take Care of Yourself), one of the few evidence-based interventions developed and tested with Latino youth to reduce sexual risk behaviors. We recruited 35 participants from community-based organizations throughout the United States to participate in the SL ¡Cuídate! Training of Facilitators. Preparation to use SL consisted of four phases: (1) recruitment and computer capacity screening, (2) enrollment, (3) orientation to the SL program, and (4) technical support throughout the synchronous training sessions. Technical difficulties, the associated cause, and the mitigation strategy implemented were recorded during each session. Participants completed evaluations including perceptions of self-efficacy and confidence to complete the necessary skills to participate in SL training. Overall, participants reported high levels of self-efficacy for all skills necessary to participate in SL training. Based on an 11-point scale (0-10), self-efficacy to download and access the software was rated the highest: mean 8.29 (SD 2.19). Interacting with items in SL had the lowest mean score: mean 7.49 (SD 2.89). The majority of technical difficulties experienced by participants were related to inadequate Internet connections or computer malfunctions. Our findings support the feasibility of using SL for the ¡Cuídate! Training of Facilitators. The process used in this study to prepare participants to use SL can be used as a basis for other evidence-based intervention training in SL. This study is an important contribution to developing cost-effective and accessible training options for evidence-based interventions.

Technical success, technique efficacy and complications of minimally-invasive imaging-guided percutaneous ablation procedures of breast cancer: A systematic review and meta-analysis.

PubMed

Mauri, Giovanni; Sconfienza, Luca Maria; Pescatori, Lorenzo Carlo; Fedeli, Maria Paola; Alì, Marco; Di Leo, Giovanni; Sardanelli, Francesco

2017-08-01

To systematically review studies concerning imaging-guided minimally-invasive breast cancer treatments. An online database search was performed for English-language articles evaluating percutaneous breast cancer ablation. Pooled data and 95% confidence intervals (CIs) were calculated. Technical success, technique efficacy, minor and major complications were analysed, including ablation technique subgroup analysis and effect of tumour size on outcome. Forty-five studies were analysed, including 1,156 patients and 1,168 lesions. Radiofrequency (n=577; 50%), microwaves (n=78; 7%), laser (n=227; 19%), cryoablation (n=156; 13%) and high-intensity focused ultrasound (HIFU, n=129; 11%) were used. Pooled technical success was 96% (95%CI 94-97%) [laser=98% (95-99%); HIFU=96% (90-98%); radiofrequency=96% (93-97%); cryoablation=95% (90-98%); microwave=93% (81-98%)]. Pooled technique efficacy was 75% (67-81%) [radiofrequency=82% (74-88); cryoablation=75% (51-90); laser=59% (35-79); HIFU=49% (26-74)]. Major complications pooled rate was 6% (4-8). Minor complications pooled rate was 8% (5-13%). Differences between techniques were not significant for technical success (p=0.449), major complications (p=0.181) or minor complications (p=0.762), but significant for technique efficacy (p=0.009). Tumour size did not impact on variables (p>0.142). Imaging-guided percutaneous ablation techniques of breast cancer have a high rate of technical success, while technique efficacy remains suboptimal. Complication rates are relatively low. • Imaging-guided ablation techniques for breast cancer are 96% technically successful. • Overall technique efficacy rate is 75% but largely inhomogeneous among studies. • Overall major and minor complication rates are low (6-8%).

76 FR 72666 - Pipeline Safety: Expanding the Use of Excess Flow Valves in Gas Distribution Systems to...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-25

... technical feasibility and cost of the installation of such valves; (D) The public safety benefits of the... public comment regarding the technical challenges, and the potential costs and the potential benefits of... a cost-benefit perspective. DATES: Persons interested in submitting written comments on this ANPRM...

Replacing Technically Skilled Workers: Challenges and Suggestions

ERIC Educational Resources Information Center

Evanciew, Cheryl E. P.; Wither, Steven V.

2004-01-01

Throughout the early 1900s, the United States could either find technically skilled workers based upon their backgrounds or was able to train workers quickly. Farmers, military personnel, and other sources of skilled workers were available to fill the needs of the workforce. These sources of readily available skilled workers are no longer as…

Verification of Accurate Technical Insight: A Prerequisite for Self-Directed Surgical Training

ERIC Educational Resources Information Center

Hu, Yinin; Kim, Helen; Mahmutovic, Adela; Choi, Joanna; Le, Ivy; Rasmussen, Sara

2015-01-01

Simulation-based surgical skills training during preclinical education is a persistent challenge due to time constraints of trainees and instructors alike. Self-directed practice is resource-efficient and flexible; however, insight into technical proficiency among trainees is often lacking. The purpose of this study is to prospectively assess the…

Education Student Perceptions of Virtual Reality as a Learning Tool

ERIC Educational Resources Information Center

Domingo, Jelia R.; Bradley, Elizabeth Gates

2018-01-01

The purpose of this study was to ascertain student perceptions of the use and value of three-dimensional virtual environments. A grounded theory approach was used to gather and examine data. Just over half of student participants reported positive experiences. However, most experienced technical difficulties. Despite the technical challenges of…

Teacher Collaborative Curriculum Design in Technical Vocational Colleges: A Strategy for Maintaining Curriculum Consistency?

ERIC Educational Resources Information Center

Albashiry, Nabeel M.; Voogt, Joke M.; Pieters, Jules M.

2015-01-01

The Technical Vocational Education and Training (TVET) curriculum requires continuous renewal and constant involvement of stakeholders in the redesign process. Due to a lack of curriculum design expertise, TVET institutions in developing contexts encounter challenges maintaining and advancing the quality and relevance of their programmes to the…

College Readiness and Workforce Challenges

ERIC Educational Resources Information Center

Evans, Thomas G.; Cook, Harry J.

2011-01-01

One of the key points of agreement among educators is that highly successful schools must disseminate best practices so that all can benefit. Eastern Technical High School, part of Baltimore County (MD) Public Schools, is a career and technical education (CTE) high school where students gain the knowledge and skills they need to pursue a career in…

Technical and Vocational Education and Training (TVET): Understanding the Nigerian Experience

ERIC Educational Resources Information Center

Dike, Victor Ebipuruonwu

2013-01-01

The descriptive mixed-methods study explores and describes the challenges and prospects of the growth and development of technical and vocational education and training (TVET) schools and science-based technology education in Nigeria. It is not understood how Nigerians in the United States perceive the impacts of governmental policies on education…

Challenges and Rewards of Teaching Intercultural Communication in a Technical Writing Course: A Case Study

ERIC Educational Resources Information Center

Cardenas, Diana L.

2012-01-01

Community-based projects immerse technical writing students in intercultural communication, addressing local needs and shaping documents in human terms. Students at a South Texas university work to establish communication with clients in a city-county health department to create effective documents and disseminate family health legislation. To…

Globalization, Critical Post-Colonialism and Career and Technical Education in Africa: Challenges and Possibilities

ERIC Educational Resources Information Center

Goura, Tairou

2012-01-01

In Sub-Saharan Africa (SSA), technical and vocational education and training (TVET) is central to political discourses and educational concerns as a means for economic development, poverty alleviation, youth employment, and social mobility. Yet, there is an intriguing contradiction between this consideration and the real attention dedicated to…

CareerTech VISION 2012--Transforming CTE Together

ERIC Educational Resources Information Center

Bray, Janet B.

2012-01-01

As the leader in career and technical education (CTE), the Association for Career and Technical Education (ACTE) understands the ongoing challenges faced by the CTE community. That is why ACTE has created CareerTech VISION 2012, a bold and visionary event that addresses the evolving needs of the global society and meets all individual and…

Technical College Teachers Sharing Their Knowledge: Does Leadership, Institutional Factors or Barriers Predict Their Practices?

ERIC Educational Resources Information Center

Tahir, Lokman Mohd; Musah, Muhamad Berhanddin; Abdullah, Abdul Halim; Musta'amal, Aede Hatib; Abdullah, Mohd Hazim Asran

2016-01-01

This study determines the preferable leadership practised by colleges' directors, institutional factors and challenges encountered in knowledge sharing in Malaysian technical higher learning institutions (HLIs). Using a pragmatic mixed-method strand, we obtained 212 teachers and instructors' viewpoints on knowledge sharing factors and barriers.…

A Tanzanian Perspective of the Technical Aspects of IT Service Management Education

ERIC Educational Resources Information Center

Kemppainen, Jyri; Tedre, Matti; Sutinen, Erkki

2012-01-01

Information technology (IT) professionals face markedly different kinds of challenges in developing countries from the ones in developed countries. Based on the research literature and our fourteen years of fieldwork in Iringa, Tanzania, we have identified eight groups of technical characteristics of IT work that significantly affect the work of…

Traceability in healthcare: crossing boundaries.

PubMed

Lovis, C

2008-01-01

This paper is a survey on the problem of traceability in healthcare. Traceability covers many different aspects and its understanding varies among different players. In supply chains and retails, traceability usually covers aspects pertaining to logistics. The challenge is to keep trace of objects manufactured, to track their locations in a production and distribution processes. In food industry, traceability has received a lot of attention because of public health problems related to infectious diseases. For instance, in Europe, the challenge of traceability has been to build the tracking of meat, from the living animal to the shell. In the health sector, traceability has mostly been involved in patient safety around human products such as blood derivates contaminants or implanted devices and prosthesis such as mammary implants. There are growing interests involving traceability in health related to drug safety, including the problem of counterfeited drugs, and to privacy. Traceability is also increasingly seen as a mean to improve efficiency of the logistics of care and a way to better understand costs and usage of resources. This survey is reviewing the literature and proposes a discussion based on the real use and needs of traceability in a large teaching hospital. Traceability in healthcare is at the crossroads of numerous needs. It is therefore of particular complexity and raises many new challenges. Identification management and entity tracking, from serialization of consumers' good production in the supply chains, to the identification of actors, patients, care providers, locations and processes is a huge effort, tackling economical, political, ethical and technical challenges. New requirements are needed, not usually met in the supply chain, such as serialization and persistence in time. New problems arise, such as privacy and legal frameworks. There are growing needs to increase traceability for drug products, related to drug safety, counterfeited drugs, and to privacy. Technical problems around reliability, robustness and efficiency of carriers are still to be resolved. There is a lot at stakes. Traceability is a major aspect of the future in healthcare and requires the attention of the community of medical informatics.

A Summary of Technical Problems Associated With Broadband Cable Teleservices Development. A Survey of Technical Requirements for Broadband Cable Teleservices; Volume One.

ERIC Educational Resources Information Center

McManamon, P. M.; Utlaut, W. F.

The results of a survey of cable television (CATV) and related technological industries are summarized. In this, the first of a series of seven reports, attention is focused upon some major technical factors which need to be considered in order that a transition from the technical state of today's cable television and services to new teleservices…

Curriculum Programs in Action, Their Administration and Evaluation; Report of a Conference Devoted to Description, Demonstration, and Evaluative Discussions of Innovative Programs in Vocational-Technical Education.

ERIC Educational Resources Information Center

San Francisco State Coll., CA. Center for Technological Education.

The presentation, review and evaluation of innovative vocational-technical curriculums in operation was the major function of a San Francisco conference sponsored jointly by the Center for Technical Education at San Francisco State College and the Center for Studies in Vocational and Technical Education at the University of Wisconsin. Major…

Capability Gap Assessment - Blending Warfighter Experience with Science

DTIC Science & Technology

2013-02-15

This technical report describes the gap assessment method and the results of using it. 15. SUBJECT TERMS capability gap assessment, operational risk ...29 Challenges ...approach that blends warfighter experience with science. This paper describes the process, challenges , and opportunities associated with this technique

Organizational responses to a changing aid environment: the German Agency for Technical Cooperation (GTZ).

PubMed

Hill, Peter S

2002-01-01

As a major European donor, German government development assistance faces a series of challenges. Recent political changes have raised expectations for demonstrable health outcomes as a result of German development assistance; there has been a deepened commitment to collaboration with other bilateral and multilateral donors; and partner countries are increasingly open to new approaches to development. German development assistance also reflects a new ethos of partnership and the shift to programmatic and sector based development approaches. At the same time, its particular organizational structure and administrative framework highlight the extent of structural and systems reforms required of donors by changing development relationships, and the tensions created in responding to these. This paper examines organizational changes within the German Agency for Technical Cooperation (Deutsche Gesellschaft für Technische, Zusammenarbeit) (GTZ), aimed at increasing its Regional, Sectoral, Managerial and Process competence as they affect health and related sectors. These include the decentralization of GTZ, the trend to integration of projects, the increasing focus on policy and health systems reform, increased inter-sectoral collaboration, changes in recruitment and training, new perspectives in planning and evaluation and the introduction of a quality management programme.

An urgent need for building technical capacity for rapid diagnosis of multidrug-resistant tuberculosis (MDR-TB) among new cases: A case report from Maharashtra, India.

PubMed

Atre, Sachin

2015-01-01

Multidrug-resistant tuberculosis (MDR-TB), the prevalence of which has increased across the globe in recent years, is a serious threat to public health. Timely diagnosis of MDR-TB, especially among new TB cases, is essential to facilitate appropriate treatment, which can prevent further emergence of drug resistance and its spread in the population. The present case report from India aims to address some operational challenges in diagnosing MDR-TB among new cases and potential measures to overcome them. It argues that even after seven years of implementing the DOTS-Plus program for controlling MDR-TB, India still lacks the technical capacity for rapid MDR-TB diagnosis. The case report underscores an urgent need to explore the use of WHO-endorsed techniques such as Xpert MTB/Rif and commercial assays such as Genotype MTBDR for rapid diagnosis of MDR-TB among new cases. Suitable applications may be found for other TB high-burden countries where MDR-TB is a major concern. Copyright © 2015 King Saud Bin Abdulaziz University for Health Sciences. Published by Elsevier Ltd. All rights reserved.

Civil engineering at the crossroads in the twenty-first century.

PubMed

Ramírez, Francisco; Seco, Andres

2012-12-01

The twenty-first century presents a major challenge for civil engineering. The magnitude and future importance of some of the problems perceived by society are directly related to the field of the civil engineer, implying an inescapable burden of responsibility for a group whose technical soundness, rational approach and efficiency is highly valued and respected by the citizen. However, the substantial changes in society and in the way it perceives the problems that it considers important call for a thorough review of our structures, both professional and educational; so that our profession, with its undeniable historical prestige, may modernize certain approaches and attitudes in order to continue to be a reliable instrument in the service of society, giving priority from an ethical standpoint to its actions in pursuit of "the public good". It possesses important tools to facilitate this work (new technologies, the development of communications, the transmission of scientific thought.···); but there is nevertheless a need for deep reflection on the very essence of civil engineering: what we want it to be in the future, and the ability and willingness to take the lead at a time when society needs disinterested messages, technically supported, reasonably presented and dispassionately transmitted.

Biogenic and Synthetic Peptides with Oppositely Charged Amino Acids as Binding Sites for Mineralization.

PubMed

Lemloh, Marie-Louise; Altintoprak, Klara; Wege, Christina; Weiss, Ingrid M; Rothenstein, Dirk

2017-01-28

Proteins regulate diverse biological processes by the specific interaction with, e.g., nucleic acids, proteins and inorganic molecules. The generation of inorganic hybrid materials, such as shell formation in mollusks, is a protein-controlled mineralization process. Moreover, inorganic-binding peptides are attractive for the bioinspired mineralization of non-natural inorganic functional materials for technical applications. However, it is still challenging to identify mineral-binding peptide motifs from biological systems as well as for technical systems. Here, three complementary approaches were combined to analyze protein motifs consisting of alternating positively and negatively charged amino acids: (i) the screening of natural biomineralization proteins; (ii) the selection of inorganic-binding peptides derived from phage display; and (iii) the mineralization of tobacco mosaic virus (TMV)-based templates. A respective peptide motif displayed on the TMV surface had a major impact on the SiO₂ mineralization. In addition, similar motifs were found in zinc oxide- and zirconia-binding peptides indicating a general binding feature. The comparative analysis presented here raises new questions regarding whether or not there is a common design principle based on acidic and basic amino acids for peptides interacting with minerals.

[The theme of disaster in health care: profile of technical and scientific production in the specialized database on disasters of the Virtual Health Library - VHL].

PubMed

Rocha, Vania; Ximenes, Elisa Francioli; Carvalho, Mauren Lopes de; Alpino, Tais de Moura Ariza; Freitas, Carlos Machado de

2014-09-01

In the specialized database of the Virtual Health Library (VHL), the DISASTER database highlights the importance of the theme for the health sector. The scope of this article is to identify the profiles of technical and scientific publications in the specialized database. Based on systematic searches and the analysis of results it is possible to determine: the type of publication; the main topics addressed; the most common type of disasters mentioned in published materials, countries and regions as subjects, historic periods with the most publications and the current trend of publications. When examining the specialized data in detail, it soon becomes clear that the number of major topics is very high, making a specific search process in this database a challenging exercise. On the other hand, it is encouraging that the disaster topic is discussed and assessed in a broad and diversified manner, associated with different aspects of the natural and social sciences. The disaster issue requires the production of interdisciplinary knowledge development to reduce the impacts of disasters and for risk management. In this way, since the health sector is a interdisciplinary area, it can contribute to knowledge production.

Proteomics technique opens new frontiers in mobilome research.

PubMed

Davidson, Andrew D; Matthews, David A; Maringer, Kevin

2017-01-01

A large proportion of the genome of most eukaryotic organisms consists of highly repetitive mobile genetic elements. The sum of these elements is called the "mobilome," which in eukaryotes is made up mostly of transposons. Transposable elements contribute to disease, evolution, and normal physiology by mediating genetic rearrangement, and through the "domestication" of transposon proteins for cellular functions. Although 'omics studies of mobilome genomes and transcriptomes are common, technical challenges have hampered high-throughput global proteomics analyses of transposons. In a recent paper, we overcame these technical hurdles using a technique called "proteomics informed by transcriptomics" (PIT), and thus published the first unbiased global mobilome-derived proteome for any organism (using cell lines derived from the mosquito Aedes aegypti ). In this commentary, we describe our methods in more detail, and summarise our major findings. We also use new genome sequencing data to show that, in many cases, the specific genomic element expressing a given protein can be identified using PIT. This proteomic technique therefore represents an important technological advance that will open new avenues of research into the role that proteins derived from transposons and other repetitive and sequence diverse genetic elements, such as endogenous retroviruses, play in health and disease.

Minimally invasive repair of pectus excavatum

PubMed Central

Calder, Bennett W.; Lesher, Aaron

2016-01-01

Pectus excavatum, an acquired or congenital depression of the anterior chest wall, is the most commonly occurring chest wall deformity. Patients with pectus excavatum experience psychosocial and physiologic consequences such as impaired social development and pulmonary and/or cardiac dysfunction as a result of the deformity. Traditionally, repair of the defect was performed with a major open operation, the most common being based on modifications of the Ravitch procedure. In the late 1990’s, the operative approach was challenged with a new minimally invasive technique described by Dr. Donald Nuss. This approach utilizes thoracoscopic visualization with small incisions and placement of a temporary metal bar positioned behind the sternum for support it while the costal cartilages remodel. Since introduction, the minimally invasive repair of pectus excavatum (MIRPE) has become accepted in many centers as the procedure of choice for repair of pectus excavatum. In experienced hands, the procedure has excellent outcomes, shorter procedural length, and outstanding cosmetic results. However, proper patient selection and attention to technical details are essential to achieve optimal outcomes and prevent significant complications. In the following, we describe our perspective on pectus excavatum deformities, operative planning, and technical details of the MIRPE procedure. PMID:29078501

Printed batteries and conductive patterns in technical textiles

NASA Astrophysics Data System (ADS)

Willert, Andreas; Meuser, Carmen; Baumann, Reinhard R.

2018-05-01

Various applications of functional devices need a tailored and reliable supply of electrical energy. Batteries are electrochemical systems that deliver energy for functional devices and applications. Due to the common use, several rigid types of batteries have been standardized. To fully integrate the battery into a product that is bendable, free in geometry and less than 1 mm thick, printing of power adaptable batteries is a challenging area of research. Therefore, the well-known zinc-manganese system, which is very promising due to its environmental sustainability and its simplicity, has been used to manufacture battery solutions on a new kind of substrate: technical textiles. Another challenge is the deposition of conductive patterns. At present, embroidery with metallic yarn is the only possibility to provide conducting paths on technical textiles, a time-consuming and elaborate process. Screen printed conductive pathways will generate a new momentum in the manufacturing of conductivity on textiles.

Robotic-Assisted Versus Manual Prostatic Arterial Embolization for Benign Prostatic Hyperplasia: A Comparative Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bagla, Sandeep, E-mail: sandeep.bagla@gmail.com; Smirniotopoulos, John; Orlando, Julie C.

PurposeProstatic artery embolization (PAE) is a safe and efficacious procedure for benign prostatic hyperplasia (BPH), though is technically challenging. We present our experience of technical and clinical outcomes of robotic and manual PAE in patients with BPH.Materials and MethodsIRB-approved retrospective study of 40 consecutive patients 49–81 years old with moderate or severe grade BPH from May 2014 to July 2015: 20 robotic-assisted PAE (group 1), 20 manual PAE (group 2). Robotic-assisted PAE was performed using the Magellan Robotic System. American Urological Association (AUA-SI) score, cost, technical and clinical success, radiation dose, fluoroscopy, and procedure time were reviewed. Statistical analysis was performedmore » within and between each group using paired t test and one-way analysis of variance respectively, at 1 and 3 months.ResultsNo significant baseline differences in age and AUA-SI between groups. Technical success was 100% (group 1) and 95% (group 2). One unsuccessful subject from group 2 returned for a successful embolization using robotic assistance. Fluoroscopy and procedural times were similar between groups, with a non-significant lower patient radiation dose in group 1 (30,632.8 mGy/cm{sup 2} vs 35,890.9, p = 0.269). Disposable cost was significantly different between groups with the robotic-assisted PAE incurring a higher cost (group 1 $4530.2; group 2 $1588.5, p < 0.0001). Clinical improvement was significant in both arms at 3 months: group 1 mean change in AUA-SI of 8.3 (p = 0.006), group 2: 9.6 (p < 0.0001). No minor or major complications occurred.ConclusionsRobotic-assisted PAE offers technical success comparable to manual PAE, with similar clinical improvement with an increased cost.« less

Digital devices: big challenge in color management

NASA Astrophysics Data System (ADS)

Vauderwange, Oliver; Curticapean, Dan; Dreβler, Paul; Wozniak, Peter

2014-09-01

The paper will present how the students learn to find technical solutions in color management by using adequate digital devices and recognize the specific upcoming tasks in this area. Several issues, problems and their solutions will be discussed. The scientific background offer specific didactical solutions in this area of optics. Color management is the major item of this paper. Color management is a crucial responsibility for media engineers and designers. Print, screen and mobile applications must independently display the same colors. Predictability and consistency in the color representation are the aims of a color management system. This is only possible in a standardized and audited production workflow. Nowadays digital media have a fast-paced development process. An increasing number of different digital devices with different display sizes and display technologies are a great challenge for every color management system. The authors will present their experience in the field of color management. The design and development of a suitable learning environment with the required infrastructure is in the focus. The combination of theoretical and practical lectures creates a deeper understanding in the area of the digital color representation.

Simulation in surgery: a review.

PubMed

Tan, Shaun Shi Yan; Sarker, Sudip K

2011-05-01

The ability to acquire surgical skills requires consistent practice, and evidence suggests that many of these technical skills can be learnt away from the operating theatre. The aim of this review article is to discuss the importance of surgical simulation today and its various types, exploring the effectiveness of simulation in the clinical setting and its challenges for the future. Surgical simulation offers the opportunity for trainees to practise their surgical skills prior to entering the operating theatre, allowing detailed feedback and objective assessment of their performance. This enables better patient safety and standards of care. Surgical simulators can be divided into organic or inorganic simulators. Organic simulators, consisting of live animal and fresh human cadaver models, are considered to be of high-fidelity. Inorganic simulators comprise virtual reality simulators and synthetic bench models. Current evidence suggests that skills acquired through training with simulators, positively transfers to the clinical setting and improves operative outcome. The major challenge for the future revolves around understanding the value of this new technology and developing an educational curriculum that can incorporate surgical simulators.

The Use and Value of Defense Technical Information Center Products and Services.

ERIC Educational Resources Information Center

Roderer, Nancy K.; And Others

This study describes the use and value of the major information products and services provided by the Defense Technical Information Center (DTIC). These products and services include technical report distribution on an on-demand basis and through the Automatic Document Distribution (ADD) program; secondary information dissemination through online…

Scientific and Technical Information in Canada, Part II, Chapter 1: Government Departments and Agencies.

ERIC Educational Resources Information Center

Science Council of Canada, Ottawa (Ontario).

Canada's major scientific and technical information resources are supported largely by the Federal Government. They consist of libraries, data files, specialized information centers, and field services. The Canadian Government has no overall policy concerning the handling of scientific and technical information. The need for a national information…

Role-Playing as Critical Thinking in the Technical Writing Classroom.

ERIC Educational Resources Information Center

Wilner, Arlene

Given the affective dimension of writing in the workplace, assignments based on casebook scenarios have definite advantages in a technical or professional writing course. An English professor surveyed faculty in the Schools of Business and Education at Rider College prior to revising a course in technical writing. A majority of faculty, when asked…

Technical Writing 1987: Galloping Off in at Least Two Directions.

ERIC Educational Resources Information Center

Stohrer, Freda F.

Technical writing instructors generally agree about the absolute need for communication skills throughout the technological work place, but a survey of technical writing journal articles shows a lack of focus on ways to address business's needs for on-the-job literacy. One major advance within the profession in recent years has been the…

Launch Vehicle Design and Optimization Methods and Priority for the Advanced Engineering Environment

NASA Technical Reports Server (NTRS)

Rowell, Lawrence F.; Korte, John J.

2003-01-01

NASA's Advanced Engineering Environment (AEE) is a research and development program that will improve collaboration among design engineers for launch vehicle conceptual design and provide the infrastructure (methods and framework) necessary to enable that environment. In this paper, three major technical challenges facing the AEE program are identified, and three specific design problems are selected to demonstrate how advanced methods can improve current design activities. References are made to studies that demonstrate these design problems and methods, and these studies will provide the detailed information and check cases to support incorporation of these methods into the AEE. This paper provides background and terminology for discussing the launch vehicle conceptual design problem so that the diverse AEE user community can participate in prioritizing the AEE development effort.

Status of the International Space Station Regenerative ECLSS Water Recovery and Oxygen Generation Systems

NASA Technical Reports Server (NTRS)

Bagdigian, Robert M.; Cloud, Dale

2005-01-01

NASA is developing three racks containing regenerative water recovery and oxygen generation systems (WRS and OGS) for deployment on the International Space Station (ISS). The major assemblies included in these racks are the Water Processor Assembly (WPA), Urine Processor Assembly (UPA), Oxygen Generation Assembly (OGA), and the Power Supply Module (PSM) supporting the OGA. The WPA and OGA are provided by Hamilton Sundstrand Space Systems International (HSSSI), Inc., while the UPA and PSM are developed in- house by the Marshall Space Flight Center (MSFC). The assemblies have completed the manufacturing phase and are in various stages of testing and integration into the flight racks. This paper summarizes the status as of April 2005 and describes some of the technical challenges encountered and lessons learned over the past year.

[Severe infective endocarditis through the history].

PubMed

Rouzé, S; Leguerrier, A; Verhoye, J P; Flécher, E

2017-02-01

The history of infective endocarditis (IE) is a good example of medical progress. Initially incurable, endocarditis, when diagnosed, was synonym of death. After significant diagnostic progress, thanks to Osler's contribution especially, the first surgeries and antibacterial drugs obtained very few successful cures. We had to wait until Flamming's discovery to observe frequent cures thanks to antibiotics. Surgery manages to push possibilities of cure a bit further. However, paravalvular extensions, described since the first surgical case of IE, was a real technical matter. Thus, the second half of 20th century was devoted to overcoming this surgical challenge. In this historical review, we describe the story of severe IE, especially with paravalvular involvement, by highlighting major progress - clinical and surgical, that allows its current management. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

The NASA "PERS" Program: Solid Polymer Electrolyte Development for Advanced Lithium-Based Batteries

NASA Technical Reports Server (NTRS)

Baldwin, Richard S.; Bennett, William R.

2007-01-01

In fiscal year 2000, The National Aeronautics and Space Administration (NASA) and the Air Force Research Laboratory (AFRL) established a collaborative effort to support the development of polymer-based, lithium-based cell chemistries and battery technologies to address the next generation of aerospace applications and mission needs. The ultimate objective of this development program, which was referred to as the Polymer Energy Rechargeable System (PERS), was to establish a world-class technology capability and U.S. leadership in polymer-based battery technology for aerospace applications. Programmatically, the PERS initiative exploited both interagency collaborations to address common technology and engineering issues and the active participation of academia and private industry. The initial program phases focused on R&D activities to address the critical technical issues and challenges at the cell level. Out of a total of 38 proposals received in response to a NASA Research Announcement (NRA) solicitation, 18 proposals (13 contracts and 5 grants) were selected for initial award to address these technical challenges. Brief summaries of technical approaches, results and accomplishments of the PERS Program development efforts are presented. With Agency support provided through FY 2004, the PERS Program efforts were concluded in 2005, as internal reorganizations and funding cuts resulted in shifting programmatic priorities within NASA. Technically, the PERS Program participants explored, to various degrees over the lifetime of the formal program, a variety of conceptual approaches for developing and demonstrating performance of a viable advanced solid polymer electrolyte possessing the desired attributes, as well as several participants addressing all components of an integrated cell configuration. Programmatically, the NASA PERS Program was very successful, even though the very challenging technical goals for achieving a viable solid polymer electrolyte material or the overall envisioned long-term, program objectives were not met due to funding reductions. The NASA PERS Program provided research opportunities and generated and disseminated a wealth of new scientific knowledge and technical competencies within the polymer electrolyte area.

The global Filipino nurse: An integrative review of Filipino nurses' work experiences.

PubMed

Montayre, Jed; Montayre, Jasmine; Holroyd, Eleanor

2018-05-01

To understand the work-related experiences of Philippine-trained nurses working globally. The Philippines is a major source country of foreign-trained nurses located globally. However, there is paucity of research on professional factors and career related issues affecting foreign-trained nurses' work experiences. An integrative review through a comprehensive search of literature was undertaken from November 2015 and was repeated in August 2016. Seven articles satisfied the selection criteria. Filipino nurses experienced differences in the practice of nursing in terms of work process, roles and autonomy. Moreover, they encountered challenges such as work-related discrimination and technical difficulties within the organisation. A clear understanding of Filipino nurses' work experiences and the challenges they have encountered suggests identification of important constructs influencing effective translation of nursing practice across cultures and health systems, which then form the basis for support strategies. It is critical to recognize foreign-trained nurses' experience of work-related differences and challenges as these foster favorable conditions for the management team to plan and continually evaluate policies around recruitment, retention and support offered to these nurses. Furthermore, findings suggest internationalization of nursing framework and standards integrating a transcultural paradigm among staff members within a work organisation. © 2017 John Wiley & Sons Ltd.

[Airway management in Ludwig's angina - a challenge: case report].

PubMed

Fellini, Roberto Taboada; Volquind, Daniel; Schnor, Otávio Haygert; Angeletti, Marcelo Gustavo; Souza, Olívia Egger de

Ludwig's angina (LA) is an infection of the submandibular space, first described by Wilhelm Frederick von Ludwig in 1836. It represents an entity difficult to manage due to the rapid progression and difficulty in maintaining airway patency, a major challenge in medical practice, resulting in asphyxia and death in 8-10% of patients. Describe a case of a patient with Ludwig's angina undergoing surgery, with emphasis on airway management, in addition to reviewing the articles published in the literature on this topic. Male patient, 21 years, drug addict, admitted by the emergency department and diagnosed with LA. Difficult airway was identified during the anesthetic examination. In additional tests, significant deviation from the tracheal axis was seen. Undergoing bilateral thoracoscopic pleural drainage, we opted for airway management through tracheal intubation using fiberoptic bronchoscopy, and balanced general anesthesia was proposed. There were no complications during the surgical-anesthetic act. After the procedure, the patient remained intubated and mechanically ventilated in the intensive care unit. Airway management in patients with Ludwig's angina remains challenging. The choice of the safest technique should be based on clinical signs, technical conditions available, and the urgent need to preserve the patient's life. Copyright © 2015 Sociedade Brasileira de Anestesiologia. Publicado por Elsevier Editora Ltda. All rights reserved.

Surrogate Joint Aerial Layer Network (JALN) Experiment: Applications of Commercial-Off-The-Shelf Technologies for Researching Future JALN Challenges

DTIC Science & Technology

2014-12-01

CHALLENGES DECEMBER 2014 TECHNICAL REPORT APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED STINFO COPY AIR FORCE RESEARCH LABORATORY INFORMATION...JOINT AERIAL LAYER NETWORK (JALN) EXPERIMENT: APPLICATION OF COMMERCIAL-OFF-THE-SHELF TECHNOLOGIES FOR RESEARCHING FUTURE JALN CHALLENGES 5a... challenge JALN developers. The use of low-cost COTS wireless technology is found to be a suitable surrogate for military hardware for investigating

Launch Vehicle Design Process: Characterization, Technical Integration, and Lessons Learned

NASA Technical Reports Server (NTRS)

Blair, J. C.; Ryan, R. S.; Schutzenhofer, L. A.; Humphries, W. R.

2001-01-01

Engineering design is a challenging activity for any product. Since launch vehicles are highly complex and interconnected and have extreme energy densities, their design represents a challenge of the highest order. The purpose of this document is to delineate and clarify the design process associated with the launch vehicle for space flight transportation. The goal is to define and characterize a baseline for the space transportation design process. This baseline can be used as a basis for improving effectiveness and efficiency of the design process. The baseline characterization is achieved via compartmentalization and technical integration of subsystems, design functions, and discipline functions. First, a global design process overview is provided in order to show responsibility, interactions, and connectivity of overall aspects of the design process. Then design essentials are delineated in order to emphasize necessary features of the design process that are sometimes overlooked. Finally the design process characterization is presented. This is accomplished by considering project technical framework, technical integration, process description (technical integration model, subsystem tree, design/discipline planes, decision gates, and tasks), and the design sequence. Also included in the document are a snapshot relating to process improvements, illustrations of the process, a survey of recommendations from experienced practitioners in aerospace, lessons learned, references, and a bibliography.

Urban Rail Supporting Technology Program Fiscal Year 1974 Year End Summary

DOT National Transportation Integrated Search

1975-03-01

Major areas include program management, technical support and application engineering, facilities development, test and evaluation, and technology development. Specific technical discussion includes track measurement systems; UMTA facilities developm...

15 CFR 1180.8 - Appointment of Agency Liaison Officers.

Code of Federal Regulations, 2014 CFR

2014-01-01

... SCIENTIFIC, TECHNICAL AND ENGINEERING INFORMATION TO THE NATIONAL TECHNICAL INFORMATION SERVICE § 1180.8... instruments); (3) Appoint additional liaison officers for major units or components of an agency if the...

Monitored natural attenuation of chlorinated solvents—Moving beyond reductive dechlorination

USGS Publications Warehouse

Vangelas, Karen M.; Looney, Brian B.; Early, Tom O.; Gilmore, Tyler; Chapelle, Francis H.; Adams, Karen M.; Sink, Claire H.

2006-01-01

Monitored natural attenuation (MNA), while a remedy of choice for many sites, can be challenging when the contaminants are chlorinated solvents. Even with many high-quality technical guidance references available, there continue to be challenges implementing MNA at some chlorinated solvent sites. The U.S. Department of Energy, as one organization facing such challenges, is leading a project that will incorporate developing concepts and tools into the existing toolbox for selecting and implementing MNA as a remediation option at sites with chlorinated solvent contamination. The structure and goals of this project were introduced in an article in the Winter 2004 issue of Remediation (Sink et al., 2004). This article is a summary of the three technical areas being developed through the project: mass balance, enhanced attenuation, and characterization and monitoring supporting the first two areas.

Final tolerancing approach and the value of short-cutting tolerances by measurement

NASA Astrophysics Data System (ADS)

Grupp, Frank; Prieto, Eric; Geis, Norbert; Bode, Andreas; Bodendorf, Christof; Costille, Anne; Katterloher, Reinhard; Penka, Daniela; Bender, Ralf

2016-07-01

Within the ESAs 2015 - 2025 Cosmic Vision framework the 1.2 m aperture EUCLID space telescope addresses cosmological questions related to dark matter and dark energy. Being equipped with two instruments that are simultaneously observing patches of > 0.5 square degree on the sky EUCLID is aiming at major cosmological probes in a large seven years survey scanning the entire extragalactic sky. These two instruments, the visual light high spacial resolution imager (VIS) and the near infrared spectrometer and photometer (NISP) are separated by a dichroic beam splitter. Its huge field of view (FoV) - larger than the full moon disk - together with high demands on the optical performance and strong requirements on in flight stability lead to very challenging demands on alignment and post launch - post cool-down optical element position. The role of an accurate and trust-worthy tolerance analysis which is well adopted to the stepwise integration and alignment concept, as well as to the missions stability properties is therefore crucial for the missions success. While the previous contributions of this series of papers (e.g.[1])was addressing the technical aspects of tolerancing, the mechanical challenges and the answers of the NISP instrument to these challenges, this paper will focus on our concept of shortcutting the tolerance chain by measurement wherever useful and possible. The NISP instrument is only possible, due to the innovative use of technologies such as computer generated hologram (CGH) based manufacturing and alignment. Expanding this concept, certain steps in the assembly process, such as focal length determination before detector placement allow to reduce the overall tolerance induced imaging errors. With this papers we show three major examples of this shortcutting strategy.

High Energy Density Li-ion Cells for EV’s Based on Novel, High Voltage Cathode Material Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kepler, Keith D.; Slater, Michael

This Li-ion cell technology development project had three objectives: to develop advanced electrode materials and cell components to enable stable high-voltage operation; to design and demonstrate a Li-ion cell using these materials that meets the PHEV40 performance targets; and to design and demonstrate a Li-ion cell using these materials that meets the EV performance targets. The major challenge to creating stable high energy cells with long cycle life is system integration. Although materials that can give high energy cells are known, stabilizing them towards long-term cycling in the presence of other novel cell components is a major challenge. The majormore » technical barriers addressed by this work include low cathode specific energy, poor electrolyte stability during high voltage operation, and insufficient capacity retention during deep discharge for Si-containing anodes. Through the course of this project, Farasis was able to improve capacity retention of NCM materials for 4.4+ V operation, through both surface treatment and bulk-doping approaches. Other material advances include increased rate capability and of HE-NCM materials through novel synthesis approach, doubling the relative capacity at 1C over materials synthesized using standard methods. Silicon active materials proved challenging throughout the project and ultimately were the limiting factor in the energy density vs. cycle life trade off. By avoiding silicon anodes for the lower energy PHEV design, we manufactured cells with intermediate energy density and long cycle life under high voltage operation for PHEV applications. Cells with high energy density for EV applications were manufactured targeting a 300 Wh/kg design and were able to achieve > 200 cycles.« less

A qualitative study of the current situation of elderly care in Iran: what can we do for the future?

PubMed

Goharinezhad, Salime; Maleki, Mohammadreza; Baradaran, Hamid Reza; Ravaghi, Hamid

2016-01-01

With the successful improvement of global health systems and social security in societies, the world is now advancing toward aging. All countries have to face the phenomenon of population aging sooner or later depending on their degree of development; however, elderly care is predicted to soon become a major concern for developing countries such as Iran. This study was conducted to identify the challenges of elderly care in Iran and to help policymakers develop roadmaps for the future through providing a clearer image of the current state of affairs in this area of healthcare. This study has adopted a framework approach to qualitative data analysis. For this purpose, 37 semi-structured interviews were conducted in 2015 with a number of key informants in elderly care who were familiar with the process at macro-, meso-, and micro-levels. Maximum variation purposive sampling was performed to select the study samples. A conceptual framework was designed using a review of the literature, and key issues were then identified for data analysis. The elderly care process yielded five major challenges, including policymaking, access, technical infrastructure, integrity and coordination, and health-based care services. According to the stakeholders of elderly care in Iran, the current care system is not well-suited for meeting the needs of the elderly, as the elderly tend to receive the services they need sporadically and in a non-coherent manner. Given the rapid growth of the elderly population in the coming decades, it is the authorities' job to concentrate on the challenges faced by the health system and to use foresight methods for the comprehensive and systematical management of the issue.

The Global Outbreak Alert and Response Network

PubMed Central

Mackenzie, John S.; Drury, Patrick; Arthur, Ray R.; Ryan, Michael J.; Grein, Thomas; Slattery, Raphael; Suri, Sameera; Domingo, Christine Tiffany; Bejtullahu, Armand

2014-01-01

The Global Outbreak Alert and Response Network (GOARN) was established in 2000 as a network of technical institutions, research institutes, universities, international health organisations and technical networks willing to contribute and participate in internationally coordinated responses to infectious disease outbreaks. It reflected a recognition of the need to strengthen and coordinate rapid mobilisation of experts in responding to international outbreaks and to overcome the sometimes chaotic and fragmented operations characterising previous responses. The network partners agreed that the World Health Organization would coordinate the network and provide a secretariat, which would also function as the operational support team. The network has evolved to comprise 153 institutions/technical partners and 37 additional networks, the latter encompassing a further 355 members and has been directly involved in 137 missions to 79 countries, territories or areas. Future challenges will include supporting countries to achieve the capacity to detect and respond to outbreaks of international concern, as required by the International Health Regulations (2005). GOARN's increasing regional focus and expanding geographic composition will be central to meeting these challenges. The paper summarises some of network's achievements over the past 13 years and presents some of the future challenges. PMID:25186571

The global outbreak alert and response network.

PubMed

Mackenzie, John S; Drury, Patrick; Arthur, Ray R; Ryan, Michael J; Grein, Thomas; Slattery, Raphael; Suri, Sameera; Domingo, Christine Tiffany; Bejtullahu, Armand

2014-01-01

The Global Outbreak Alert and Response Network (GOARN) was established in 2000 as a network of technical institutions, research institutes, universities, international health organisations and technical networks willing to contribute and participate in internationally coordinated responses to infectious disease outbreaks. It reflected a recognition of the need to strengthen and coordinate rapid mobilisation of experts in responding to international outbreaks and to overcome the sometimes chaotic and fragmented operations characterising previous responses. The network partners agreed that the World Health Organization would coordinate the network and provide a secretariat, which would also function as the operational support team. The network has evolved to comprise 153 institutions/technical partners and 37 additional networks, the latter encompassing a further 355 members and has been directly involved in 137 missions to 79 countries, territories or areas. Future challenges will include supporting countries to achieve the capacity to detect and respond to outbreaks of international concern, as required by the International Health Regulations (2005). GOARN's increasing regional focus and expanding geographic composition will be central to meeting these challenges. The paper summarises some of network's achievements over the past 13 years and presents some of the future challenges.

Regulatory Issues and Challenges in Developing Seismic Source Characterizations for New Nuclear Power Plant Applications in the US

NASA Astrophysics Data System (ADS)

Fuller, C. W.; Unruh, J.; Lindvall, S.; Lettis, W.

2009-05-01

An integral component of the safety analysis for proposed nuclear power plants within the US is a probabilistic seismic hazard assessment (PSHA). Most applications currently under NRC review followed guidance provided within NRC Regulatory Guide 1.208 (RG 1.208) for developing seismic source characterizations (SSC) for their PSHA. Three key components of RG 1.208 guidance is that applicants should: (1) use existing PSHA models and SSCs accepted by the NRC as SSC as a starting point for their SSCs; (2) evaluate new information and data developed since acceptance of the starting model to determine if the model should be updated; and (3) follow guidelines set forth by the Senior Seismic Hazard Analysis Committee (SSHAC) (NUREG/CR-6372) in developing significant updates (i.e., updates should capture SSC uncertainty through representing the "center, body, and range of technical interpretations" of the informed technical community). Major motivations for following this guidance are to ensure accurate representations of hazard and regulatory stability in hazard estimates for nuclear power plants. All current applications with the NRC have used the EPRI-SOG source characterizations developed in the 1980s as their starting point model, and all applicants have followed RG 1.208 guidance in updating the EPRI- SOG model. However, there has been considerable variability in how applicants have interpreted the guidance, and thus there has been considerable variability in the methodology used in updating the SSCs. Much of the variability can be attributed to how different applicants have interpreted the implications of new data, new interpretations of new and/or old data, and new "opinions" of members of the informed technical community. For example, many applicants and the NRC have wrestled with the challenge of whether or not to update SSCs in light of new opinions or interpretations of older data put forth by one member of the technical community. This challenge has been further complicated by: (1) a given applicant's uncertainty in how to revise the EPRI-SOG model, which was developed using a process similar to that dictated by SSHAC for a level 3 or 4 study, without conducting a resource-intensive SSHAC level 3 or higher study for their respective application; and (2) a lack of guidance from the NRC on acceptable methods of demonstrating that new data, interpretations, and opinions are adequately represented within the EPRI-SOG model. Partly because of these issues, initiative was taken by the nuclear industry, NRC and DOE to develop a new base PSHA model for the central and eastern US. However, this new SSC model will not be completed for several years and does not resolve many of the fundamental regulatory and philosophical issues that have been raised during the current round of applications. To ensure regulatory stability and to provide accurate estimates of hazard for nuclear power plants, a dialog must be started between regulators and industry to resolve these issues. Two key issues that must be discussed are: (1) should new data and new interpretations or opinions of old data be treated differently in updated SSCs, and if so, how?; and (2) how can new data or interpretations developed by a small subset of the technical community be weighed against and potentially combined with a SSC model that was originally developed to capture the "center, body and range" of the technical community?

Constraints Militating against the Implementation of Production/Service Work in Technical Colleges in North Central Nigeria

ERIC Educational Resources Information Center

Agu, Peter A.

2016-01-01

Skill acquisition is a critical component of any vocational technical training program. When this component is missing or falls below expectation, it tends to defeat the objectives of the program. In Nigeria, many skill-oriented schools experience great challenges in trying to provide for the necessary facilities required for effective technical…

Tips for a Successful Job Search. PEPNet Tipsheet

ERIC Educational Resources Information Center

PEPNet-Northeast, 2009

2009-01-01

Looking for a job can be a challenging experience. It helps to have a positive attitude and to be well prepared for every aspect of the job search. This tipsheet uses information from the NTID (National Technical Institute for the Deaf) Center on Employment (NCE) at Rochester Institute of Technology/National Technical Institute for the Deaf and…

A Framework for 21st-Century Career-Technical and Workforce Education Curricula

ERIC Educational Resources Information Center

Rojewski, Jay W.; Hill, Roger B.

2017-01-01

Increasingly, career-technical and workforce education professionals are challenged with determining the best ways to prepare people for work, when many of the jobs those people will perform do not exist yet. Twenty-first-century work is evolving rapidly, with some jobs going away, other types of work appearing, and many people working in jobs…

Promoting Equal Access of Girls/Women to Technical and Vocational Education.

ERIC Educational Resources Information Center

Mishra, Arun; Khanna, Pinki; Shrivastava, Nalini

Despite United Nations' efforts, inequality of access for girls and women to technical and vocational education (TVE) persists in India. Challenges of the 21st century with regard to ensuring equal access of girls and women to TVE include: increasing the participation of girls (especially rural girls) in TVE; overcoming gender bias and…

Exploring Electrochromics: A Series of Eye-Catching Experiments to Introduce Students to Multidisciplinary Research

ERIC Educational Resources Information Center

Small, Leo J.; Wolf, Steven; Spoerke, Erik D.

2014-01-01

Introducing students to a multidisciplinary research laboratory presents challenges in terms of learning specific technical skills and concepts but also with respect to integrating different technical elements to form a coherent picture of the research. Here we present a multidisciplinary series of experiments we have developed in the Electronic,…

Technical and Vocational Education and Training and the Labour Market in Israel

ERIC Educational Resources Information Center

Eisenberg, Eli

2006-01-01

The aim of this report is to contribute to a better understanding of the current status of technical and vocational education and training (TVET) for human resources development (HRD) and the labour market in Israel. It describes the role and involvement of the various sectors in HRD and identifies the barriers, challenges, priorities, initiatives…

Wisconsin Technical College System Board Equity Staff Development Workshops and Services--Phase IV. Final Report.

ERIC Educational Resources Information Center

Baldus, Lorayne

A staff development program on gender equity was conducted for personnel in Wisconsin's technical colleges using the train-the-trainer method. The training took two approaches: a class for college personnel and career challenge training for project directors of single parent and displaced homemaker grants. The inservice class resulted in increased…

Technical and Professional Communication Programs and the Small College Setting: Opportunities and Challenges

ERIC Educational Resources Information Center

Latterell, Catherine G.

2003-01-01

This article argues that the small school context has been a relatively unexamined or under-examined context for technical and professional communication program development. While graduate program development holds a large share of the field's attention in recent national forums, growth in graduate programs is a consequence of demand in the job…

Design and sampling plan optimization for RT-qPCR experiments in plants: a case study in blueberry

USDA-ARS?s Scientific Manuscript database

The qPCR assay has become a routine technology in plant biotechnology and agricultural research. It is unlikely to be technically improved in the near future, but there are still challenges which center around minimizing the variability in results and transparency when reporting technical data in su...

Patterns of technical error among surgical malpractice claims: an analysis of strategies to prevent injury to surgical patients.

PubMed

Regenbogen, Scott E; Greenberg, Caprice C; Studdert, David M; Lipsitz, Stuart R; Zinner, Michael J; Gawande, Atul A

2007-11-01

To identify the most prevalent patterns of technical errors in surgery, and evaluate commonly recommended interventions in light of these patterns. The majority of surgical adverse events involve technical errors, but little is known about the nature and causes of these events. We examined characteristics of technical errors and common contributing factors among closed surgical malpractice claims. Surgeon reviewers analyzed 444 randomly sampled surgical malpractice claims from four liability insurers. Among 258 claims in which injuries due to error were detected, 52% (n = 133) involved technical errors. These technical errors were further analyzed with a structured review instrument designed by qualitative content analysis. Forty-nine percent of the technical errors caused permanent disability; an additional 16% resulted in death. Two-thirds (65%) of the technical errors were linked to manual error, 9% to errors in judgment, and 26% to both manual and judgment error. A minority of technical errors involved advanced procedures requiring special training ("index operations"; 16%), surgeons inexperienced with the task (14%), or poorly supervised residents (9%). The majority involved experienced surgeons (73%), and occurred in routine, rather than index, operations (84%). Patient-related complexities-including emergencies, difficult or unexpected anatomy, and previous surgery-contributed to 61% of technical errors, and technology or systems failures contributed to 21%. Most technical errors occur in routine operations with experienced surgeons, under conditions of increased patient complexity or systems failure. Commonly recommended interventions, including restricting high-complexity operations to experienced surgeons, additional training for inexperienced surgeons, and stricter supervision of trainees, are likely to address only a minority of technical errors. Surgical safety research should instead focus on improving decision-making and performance in routine operations for complex patients and circumstances.

Technical Writing: Library Resources for Engineers. A Self-Paced Workbook for the University of Arkansas Libraries. Revised.

ERIC Educational Resources Information Center

Dew, Stephen H.

This self-paced library workbook is a course requirement of all "technical writing" freshman English classes at the University of Arkansas. The technical writing course is required of all engineering students, and its major focus is on writing a term paper containing a bibliography produced through library research. The workbook…

Flow of Scientific and Technical Information: The Results of a Recent Major Investigation.

ERIC Educational Resources Information Center

Goodman, A. F.

Characterized were the scientific and technical information needs of 1,500 scientists and engineers from 73 companies, 8 research institutes, and 2 universities; and the flow of scientific and technical information (flow process) inherent in satisfying these needs. Interviewers asked 63 questions in the subject areas of (1) the user of scientific…

Lost in translation: assessing effectiveness of focus group questioning techniques to develop improved translation of terminology used in HIV prevention clinical trials.

PubMed

Mack, Natasha; Ramirez, Catalina B; Friedland, Barbara; Nnko, Soori

2013-01-01

Achieving participant comprehension has proven to be one of the most difficult, practical, and ethical challenges of HIV prevention clinical trials. It becomes even more challenging when local languages do not have equivalent scientific and technical vocabularies, rendering communication of scientific concepts in translated documents extremely difficult. Even when bilingual lexicons are developed, there is no guarantee that participants understand the terminology as translated. We conducted twelve focus groups with women of reproductive age in Mwanza, Tanzania to explore the effectiveness of four questioning techniques for: (1) assessing participants' familiarity with existing technical terms and concepts, (2) generating a list of acceptable technical and non-technical terms, (3) testing our definitions of technical terms, and (4) verifying participants' preferences for terms. Focus groups were transcribed, translated, and qualitatively analyzed. A translation process that uses all four questioning techniques in a step-wise approach is an effective way to establish a baseline understanding of participants' familiarity with research terms, to develop and test translatable definitions, and to identify participants' preferred terminology for international HIV clinical research. This may help to ensure that important concepts are not "lost in translation." The results emphasize the importance of using a variety of techniques depending on the level of participant familiarity with research concepts, the existence of colloquial or technical terms in the target language, and the inherent complexity of the terms.

Lost in Translation: Assessing Effectiveness of Focus Group Questioning Techniques to Develop Improved Translation of Terminology Used in HIV Prevention Clinical Trials

PubMed Central

Mack, Natasha; Ramirez, Catalina B.; Friedland, Barbara; Nnko, Soori

2013-01-01

Introduction Achieving participant comprehension has proven to be one of the most difficult, practical, and ethical challenges of HIV prevention clinical trials. It becomes even more challenging when local languages do not have equivalent scientific and technical vocabularies, rendering communication of scientific concepts in translated documents extremely difficult. Even when bilingual lexicons are developed, there is no guarantee that participants understand the terminology as translated. Methods We conducted twelve focus groups with women of reproductive age in Mwanza, Tanzania to explore the effectiveness of four questioning techniques for: (1) assessing participants' familiarity with existing technical terms and concepts, (2) generating a list of acceptable technical and non-technical terms, (3) testing our definitions of technical terms, and (4) verifying participants' preferences for terms. Focus groups were transcribed, translated, and qualitatively analyzed. Results and Discussion A translation process that uses all four questioning techniques in a step-wise approach is an effective way to establish a baseline understanding of participants' familiarity with research terms, to develop and test translatable definitions, and to identify participants' preferred terminology for international HIV clinical research. This may help to ensure that important concepts are not “lost in translation.” The results emphasize the importance of using a variety of techniques depending on the level of participant familiarity with research concepts, the existence of colloquial or technical terms in the target language, and the inherent complexity of the terms. PMID:24040075

Identifying best practices for managing operating costs for rural and small urban transportation systems: technical report.

DOT National Transportation Integrated Search

2016-08-01

Rural and small urban transit providers across the United States face fiscal challenges caused by the growing : gap between the cost of providing transit service and available federal, state, and local funding. In Texas, the : fiscal challenges facin...

Teaching Sustainable Design Using BIM and Project-Based Energy Simulations

ERIC Educational Resources Information Center

Shen, Zhigang; Jensen, Wayne; Wentz, Timothy; Fischer, Bruce

2012-01-01

The cross-disciplinary nature of energy-efficient building design has created many challenges for architecture, engineering and construction instructors. One of the technical challenges in teaching sustainable building design is enabling students to quantitatively understand how different building designs affect a building's energy performance.…

Major Management Challenges and Program Risks. Department of Education

DTIC Science & Technology

2001-01-01

GAO United States General Accounting Office Performance and Accountability SeriesJanuary 2001 Major Management Challenges and Program Risks ...34) Title and Subtitle Major Management Challenges and Program Risks Department of Education Contract or Grant Number Program Element Number Authors...Accountability Series: Major Management Challenges and Program Risks . In that series, GAO advised the Congress that it planned to reassess the

Interoperable Acquisition for Systems of Systems: The Challenges

DTIC Science & Technology

2006-09-01

Interoperable Acquisition for Systems of Systems: The Challenges James D. Smith II D. Mike Phillips September 2006 TECHNICAL NOTE...Failure of Program-Centric Risk Management 10 3.3.2 Absence of System-of-Systems Engineering 12 3.3.3 Disconnect Between System-of-Systems...SOFTWARE ENGINEERING INSTITUTE | vii viii | CMU/SEI-2006-TN-034 Abstract Large, complex systems development has always been challenging , even when the

NASA Extreme Environment Mission Operation (NEEMO) 12: Collaborative Accelerated Medical Technology Development

DTIC Science & Technology

2007-12-01

tremendous opportunity to support telesurgical care using mobile systems, where communication assets are challenging . BODY RESEARCH PLAN This... challenged with constraints of remoteness, limited resources, and limited technical expertise. This telesurgery research, funded by TATRC and reported...utilized iChat (V.2.1.3) for the Apple Macintosh. Technology Summary The challenges of implementing the technology were numerous. Beyond the fact that

Investigation of propulsion system for large LNG ships

NASA Astrophysics Data System (ADS)

Sinha, R. P.; Nik, Wan Mohd Norsani Wan

2012-09-01

Requirements to move away from coal for power generation has made LNG as the most sought after fuel source, raising steep demands on its supply and production. Added to this scenario is the gradual depletion of the offshore oil and gas fields which is pushing future explorations and production activities far away into the hostile environment of deep sea. Production of gas in such environment has great technical and commercial impacts on gas business. For instance, laying gas pipes from deep sea to distant receiving terminals will be technically and economically challenging. Alternative to laying gas pipes will require installing re-liquefaction unit on board FPSOs to convert gas into liquid for transportation by sea. But, then because of increased distance between gas source and receiving terminals the current medium size LNG ships will no longer remain economical to operate. Recognizing this business scenario shipowners are making huge investments in the acquisition of large LNG ships. As power need of large LNG ships is very different from the current small ones, a variety of propulsion derivatives such as UST, DFDE, 2-Stroke DRL and Combined cycle GT have been proposed by leading engine manufacturers. Since, propulsion system constitutes major element of the ship's capital and life cycle cost, which of these options is most suited for large LNG ships is currently a major concern of the shipping industry and must be thoroughly assessed. In this paper the authors investigate relative merits of these propulsion options against the benchmark performance criteria of BOG disposal, fuel consumption, gas emissions, plant availability and overall life cycle cost.

Lung Transplantation From Donors After Previous Cardiac Surgery: Ideal Graft in Marginal Donor?

PubMed

Palleschi, A; Mendogni, P; Tosi, D; Montoli, M; Carrinola, R; Mariolo, A V; Briganti, F; Nosotti, M

2017-05-01

Lung transplantation is a limited by donor pool shortage. Despite the efforts to extend the graft acceptability with recurrent donor criteria reformulations, previous cardiothoracic surgery is still considered a contraindication. A donor who underwent cardiac surgery could potentially provide an ideal lung but high intraoperative risks and intrinsic technical challenges are expected during the graft harvesting. The purpose of this study is to present our dedicated protocol and four clinical cases of successful lung procurements from donors who had a previous major cardiac surgery. One donor had ascending aortic root (AAR) substitution, another had mitral valve substitution, and two had coronary artery bypass surgery. The others' eligibility criteria for organ allocation, such as ABO compatibility, PaO 2 /FiO 2 ratio, absence of aspiration, or sepsis were respected. In one of the cases with previous coronary bypass grafting, the donor had a veno-arterial extracorporeal membrane oxygenation support. Consequently, the grafts required an ex vivo lung perfusion evaluation. We report the technical details of procurement and postoperative courses of recipients. All procurements were uneventful, without lung damage or waste of abdominal organs related to catastrophic intraoperative events. All recipients had a successful clinical outcome. We believe that successful transplantation is achievable even in a complicated setting, such as cases involving donors with previous cardiac surgery frequently are. Facing lung donor shortage, we strongly support any effort to avoid the loss of possible acceptable lungs. In particular, previous major cardiac surgery does not strictly imply a poor quality of lungs as well as unsustainable graft procurement. Copyright © 2017 Elsevier Inc. All rights reserved.

Independent technical review, handbook

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Purpose Provide an independent engineering review of the major projects being funded by the Department of Energy, Office of Environmental Restoration and Waste Management. The independent engineering review will address questions of whether the engineering practice is sufficiently developed to a point where a major project can be executed without significant technical problems. The independent review will focus on questions related to: (1) Adequacy of development of the technical base of understanding; (2) Status of development and availability of technology among the various alternatives; (3) Status and availability of the industrial infrastructure to support project design, equipment fabrication, facility construction,more » and process and program/project operation; (4) Adequacy of the design effort to provide a sound foundation to support execution of project; (5) Ability of the organization to fully integrate the system, and direct, manage, and control the execution of a complex major project.« less

Book Analysis: Challenger: A Major Malfunction.

DTIC Science & Technology

1988-04-01

REPORT NUMBER 88-113S TITLE BOOK ANALYSIS: CHALLENGER : A MAJOR MALFUNCTION AUTHOR(S) MAJOR THOMAS M. HALL, USAF FACULTY ADVISOR LT COL JOhN R. GRELLMAN... CHALLENGER : A MAJOR MALFUNCTION 12. PERSONAL AUTHOR(S) Hall, Thomas M., Major, USAF 13a. TYPE OF REPORT 13b. TIME COVERED 14. DATE OF REPORT (Year, Month...identify by block number) FIELD GROUP SUB-GROUP 19. ABSTRACT Continue on reverse if necessary and identify by block number) This report analyzes Challenger

Analysis of the Parameters Required for Performance Monitoring and Assessment of Military Communications Systems by Military Technical Controller

DTIC Science & Technology

1975-12-01

139 APPENDIX A* BASIC CONCEPT OF MILITARY TECHNICAL CONTROL.142 6 APIENDIX Es TEST EQUIPMENI REQUIRED FOR lEASURF.4ENr OF 1AF’AMETE RS...Control ( SATEC ) Automatic Facilities heport Army Automated Quality Monitoring Reporting System (AQMPS) Army Autcmated Technical Control-Semi (ATC-Semi...technical control then beco.. es equipment status monitoring. All the major equipment in a system wculd have internal sensors with properly selected parameters

Explosive and chemical threat detection by surface-enhanced Raman scattering: a review.

PubMed

Hakonen, Aron; Andersson, Per Ola; Stenbæk Schmidt, Michael; Rindzevicius, Tomas; Käll, Mikael

2015-09-17

Acts of terror and warfare threats are challenging tasks for defense agencies around the world and of growing importance to security conscious policy makers and the general public. Explosives and chemical warfare agents are two of the major concerns in this context, as illustrated by the recent Boston Marathon bombing and nerve gas attacks on civilians in the Middle East. To prevent such tragic disasters, security personnel must be able to find, identify and deactivate the threats at multiple locations and levels. This involves major technical and practical challenges, such as detection of ultra-low quantities of hazardous compounds at remote locations for anti-terror purposes and monitoring of environmental sanitation of dumped or left behind toxic substances and explosives. Surface-enhanced Raman scattering (SERS) is one of todays most interesting and rapidly developing methods for label-free ultrasensitive vibrational "fingerprinting" of a variety of molecular compounds. Performance highlights include attomolar detection of TNT and DNT explosives, a sensitivity that few, if any, other technique can compete with. Moreover, instrumentation needed for SERS analysis are becoming progressively better, smaller and cheaper, and can today be acquired for a retail price close to 10,000 US$. This contribution aims to give a comprehensive overview of SERS as a technique for detection of explosives and chemical threats. We discuss the prospects of SERS becoming a major tool for convenient in-situ threat identification and we summarize existing SERS detection methods and substrates with particular focus on ultra-sensitive real-time detection. General concepts, detection capabilities and perspectives are discussed in order to guide potential users of the technique for homeland security and anti-warfare purposes. Copyright © 2015 Elsevier B.V. All rights reserved.

Translational Challenges in Cardiovascular Tissue Engineering.

PubMed

Emmert, Maximilian Y; Fioretta, Emanuela S; Hoerstrup, Simon P

2017-04-01

Valvular heart disease and congenital heart defects represent a major cause of death around the globe. Although current therapy strategies have rapidly evolved over the decades and are nowadays safe, effective, and applicable to many affected patients, the currently used artificial prostheses are still suboptimal. They do not promote regeneration, physiological remodeling, or growth (particularly important aspects for children) as their native counterparts. This results in the continuous degeneration and subsequent failure of these prostheses which is often associated with an increased morbidity and mortality as well as the need for multiple re-interventions. To overcome this problem, the concept of tissue engineering (TE) has been repeatedly suggested as a potential technology to enable native-like cardiovascular replacements with regenerative and growth capacities, suitable for young adults and children. However, despite promising data from pre-clinical and first clinical pilot trials, the translation and clinical relevance of such TE technologies is still very limited. The reasons that currently limit broad clinical adoption are multifaceted and comprise of scientific, clinical, logistical, technical, and regulatory challenges which need to be overcome. The aim of this review is to provide an overview about the translational problems and challenges in current TE approaches. It further suggests directions and potential solutions on how these issues may be efficiently addressed in the future to accelerate clinical translation. In addition, a particular focus is put on the current regulatory guidelines and the associated challenges for these promising TE technologies.

Pathways to Self-Sufficiency: Successful Entrepreneurship for Refugees

ERIC Educational Resources Information Center

Fong, Rowena; Busch, Noel Bridget; Armour, Marilyn; Heffron, Laurie Cook; Chanmugam, Amy

2007-01-01

This study examined the successes and challenges of refugee entrepreneurs by interviewing 50 refugees, service providers, and technical assistance providers. Qualitative data analyses revealed that successes and challenges occurred both at the individual and family levels as well as at the community and agency levels. The findings underscore the…

The "Virtual" Reality of High-Tech Training

ERIC Educational Resources Information Center

Justice, Jamie

2004-01-01

Community and technical colleges are at a crossroads in their history and mission in preparing individuals for the challenges of lifelong learning and the workforce of the future. Many industries are faced with the challenges of replacing an aging and retiring workforce, updating employee skill sets, and maintaining quality and production…

Challenges in Archetypes Terminology Binding Using SNOMED-CT Compositional Grammar: The Norwegian Patient Summary Case.

PubMed

Marco-Ruiz, Luis; Pedersen, Rune

2017-01-01

In order to cover the requirements for interoperability in the Norwegian context, we studied the terminology binding of archetypes to terminology expressions created with the SNOMED-CT compositional grammar. As a result we identified important challenges categorized as technical, expressivity, human, and models mismatch.

Shared Challenges and in a Networked Cultural Space.

ERIC Educational Resources Information Center

Greenstein, Daniel

This paper supplements a previous paper that reported on a tour of leading U.S. research libraries that are investing significantly in and have significant experience with innovative online collections and services. The previous paper reported the following five key challenges: architectural and technical; standards and best practices; strategies…

Autonomy, Interdependence, and Social Control: NASA and the Space Shuttle "Challenger."

ERIC Educational Resources Information Center

Vaughan, Diane

1990-01-01

Shows that the organizations responsible for regulating safety at the National Aeronautics and Space Administration (NASA) failed to identify flaws in management procedures and technical design that, if corrected, might have prevented the "Challenger" tragedy. Regulatory effectiveness was inhibited by the autonomy and interdependence of…

Information Superhighway: An Overview of Technology Challenges. Report to the Congress.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC.

This report focuses on the pivotal technical issues associated with the National Information Infrastructure program, security and privacy, interoperability, and reliability, and presents the General Accounting Office's findings on these challenges. It is reported that while the structures and services to be offered by the information superhighway…

The European Project Semester at ISEP: The Challenge of Educating Global Engineers

ERIC Educational Resources Information Center

Malheiro, Benedita; Silva, Manuel; Ribeiro, Maria Cristina; Guedes, Pedro; Ferreira, Paulo

2015-01-01

Current engineering education challenges require approaches that promote scientific, technical, design and complementary skills while fostering autonomy, innovation and responsibility. The European Project Semester (EPS) at Instituto Superior de Engenharia do Porto (ISEP) (EPS@ISEP) is a one semester project-based learning programme (30 European…

Challenges in Sustaining Public Health Interventions

ERIC Educational Resources Information Center

Altman, David G.

2009-01-01

Sustainability remains a key challenge in public health. The perspective article by Fagen and Flay adds to our understanding of technical factors associated with sustaining health interventions in schools. In this commentary, the Fagen and Flay article (2009) is considered within the broader literature on sustainability. By taking a broad view,…

Experiences of New Information Technology Managers: A Qualitative Hermeneutic Phenomenological Study of IT Managers

ERIC Educational Resources Information Center

Snyder, Walter Wesley, V.

2012-01-01

Transitioning from a technical role to a managerial role has many challenges, particularly in information technology (IT) (Lester & Parnell, 2006). These challenges include people or soft skills, language skills, knowledge, intuition, mentoring, and delegation (Brokett, 2007; Feyerherm & Rice, 2002; Lester & Parnell, 2006). The IT…

Development of Lignocellulosic Biorefinery Technologies: Recent Advances and Current Challenges

DOE PAGES

Amore, Antonella; Ciesielski, Peter N.; Lin, Chien-Yuan; ...

2016-06-06

We describe some recent developments of the biorefinery concept within this review, which focuses on the efforts required to make the lignocellulosic biorefinery a sustainable and economically viable reality. In spite of the major research and development endeavours directed towards this goal over the past several decades, the integrated production of biofuel and other bio-based products still needs to be optimized from both technical and economical perspectives. This review will highlight recent progress towards the optimization of the major biorefinery processes, including biomass pretreatment and fractionation, saccharification of sugars, and conversion of sugars and lignin into fuels and chemical precursors.more » Additionally, advances in genetic modification of biomass structure and composition for the purpose of enhancing the efficacy of conversion processes, which is emerging as a powerful tool for tailoring biomass fated for the biorefinery, will be overviewed. The continual improvement of these processes and their integration in the format of a modern biorefinery is paving the way for a sustainable bio-economy which will displace large portions of petroleum-derived fuels and chemicals with renewable substitutes.« less

Development of Lignocellulosic Biorefinery Technologies: Recent Advances and Current Challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amore, Antonella; Ciesielski, Peter N.; Lin, Chien-Yuan

We describe some recent developments of the biorefinery concept within this review, which focuses on the efforts required to make the lignocellulosic biorefinery a sustainable and economically viable reality. In spite of the major research and development endeavours directed towards this goal over the past several decades, the integrated production of biofuel and other bio-based products still needs to be optimized from both technical and economical perspectives. This review will highlight recent progress towards the optimization of the major biorefinery processes, including biomass pretreatment and fractionation, saccharification of sugars, and conversion of sugars and lignin into fuels and chemical precursors.more » Additionally, advances in genetic modification of biomass structure and composition for the purpose of enhancing the efficacy of conversion processes, which is emerging as a powerful tool for tailoring biomass fated for the biorefinery, will be overviewed. The continual improvement of these processes and their integration in the format of a modern biorefinery is paving the way for a sustainable bio-economy which will displace large portions of petroleum-derived fuels and chemicals with renewable substitutes.« less

PESI - a taxonomic backbone for Europe.

PubMed

de Jong, Yde; Kouwenberg, Juliana; Boumans, Louis; Hussey, Charles; Hyam, Roger; Nicolson, Nicola; Kirk, Paul; Paton, Alan; Michel, Ellinor; Guiry, Michael D; Boegh, Phillip S; Pedersen, Henrik Ærenlund; Enghoff, Henrik; von Raab-Straube, Eckhard; Güntsch, Anton; Geoffroy, Marc; Müller, Andreas; Kohlbecker, Andreas; Berendsohn, Walter; Appeltans, Ward; Arvanitidis, Christos; Vanhoorne, Bart; Declerck, Joram; Vandepitte, Leen; Hernandez, Francisco; Nash, Róisín; Costello, Mark John; Ouvrard, David; Bezard-Falgas, Pascale; Bourgoin, Thierry; Wetzel, Florian Tobias; Glöckler, Falko; Korb, Günther; Ring, Caroline; Hagedorn, Gregor; Häuser, Christoph; Aktaç, Nihat; Asan, Ahmet; Ardelean, Adorian; Borges, Paulo Alexandre Vieira; Dhora, Dhimiter; Khachatryan, Hasmik; Malicky, Michael; Ibrahimov, Shaig; Tuzikov, Alexander; De Wever, Aaike; Moncheva, Snejana; Spassov, Nikolai; Chobot, Karel; Popov, Alexi; Boršić, Igor; Sfenthourakis, Spyros; Kõljalg, Urmas; Uotila, Pertti; Olivier, Gargominy; Dauvin, Jean-Claude; Tarkhnishvili, David; Chaladze, Giorgi; Tuerkay, Michael; Legakis, Anastasios; Peregovits, László; Gudmundsson, Gudmundur; Ólafsson, Erling; Lysaght, Liam; Galil, Bella Sarah; Raimondo, Francesco M; Domina, Gianniantonio; Stoch, Fabio; Minelli, Alessandro; Spungis, Voldermars; Budrys, Eduardas; Olenin, Sergej; Turpel, Armand; Walisch, Tania; Krpach, Vladimir; Gambin, Marie Therese; Ungureanu, Laurentia; Karaman, Gordan; Kleukers, Roy M J C; Stur, Elisabeth; Aagaard, Kaare; Valland, Nils; Moen, Toril Loennechen; Bogdanowicz, Wieslaw; Tykarski, Piotr; Węsławski, Jan Marcin; Kędra, Monika; M de Frias Martins, Antonio; Abreu, António Domingos; Silva, Ricardo; Medvedev, Sergei; Ryss, Alexander; Šimić, Smiljka; Marhold, Karol; Stloukal, Eduard; Tome, Davorin; Ramos, Marian A; Valdés, Benito; Pina, Francisco; Kullander, Sven; Telenius, Anders; Gonseth, Yves; Tschudin, Pascal; Sergeyeva, Oleksandra; Vladymyrov, Volodymyr; Rizun, Volodymyr Bohdanovych; Raper, Chris; Lear, Dan; Stoev, Pavel; Penev, Lyubomir; Rubio, Ana Casino; Backeljau, Thierry; Saarenmaa, Hannu; Ulenberg, Sandrine

2015-01-01

Reliable taxonomy underpins communication in all of biology, not least nature conservation and sustainable use of ecosystem resources. The flexibility of taxonomic interpretations, however, presents a serious challenge for end-users of taxonomic concepts. Users need standardised and continuously harmonised taxonomic reference systems, as well as high-quality and complete taxonomic data sets, but these are generally lacking for non-specialists. The solution is in dynamic, expertly curated web-based taxonomic tools. The Pan-European Species-directories Infrastructure (PESI) worked to solve this key issue by providing a taxonomic e-infrastructure for Europe. It strengthened the relevant social (expertise) and information (standards, data and technical) capacities of five major community networks on taxonomic indexing in Europe, which is essential for proper biodiversity assessment and monitoring activities. The key objectives of PESI were: 1) standardisation in taxonomic reference systems, 2) enhancement of the quality and completeness of taxonomic data sets and 3) creation of integrated access to taxonomic information. This paper describes the results of PESI and its future prospects, including the involvement in major European biodiversity informatics initiatives and programs.

Pilot testing a digital pet avatar for older adults.

PubMed

Chi, Nai-Ching; Sparks, Olivia; Lin, Shih-Yin; Lazar, Amanda; Thompson, Hilaire J; Demiris, George

Social isolation in older adults is a major public health concern. An embodied conversational agent (ECA) has the potential to enhance older adults' social interaction. However, little is known about older adults' experience with an ECA. In this paper, we conducted a pilot study to examine the perceived acceptance and utility of a tablet-based conversational agent in the form of an avatar (termed "digital pet") for older adults. We performed secondary analysis of data collected from a study that employed the use of a digital pet in ten older adults' homes for three months. Most of the participants enjoyed the companionship, entertainment, reminders, and instant assistance from the digital pet. However, participants identified limited conversational ability and technical issues as system challenges. Privacy, dependence, and cost were major concerns. Future applications should maximize the agent's conversational ability and the system's overall usability. Our results can inform future designs of conversational agents for older adults, which need to include older adults as system co-designers to maximize usability and acceptance. Copyright © 2017 Elsevier Inc. All rights reserved.

PESI - a taxonomic backbone for Europe

PubMed Central

Kouwenberg, Juliana; Boumans, Louis; Hussey, Charles; Hyam, Roger; Nicolson, Nicola; Kirk, Paul; Paton, Alan; Michel, Ellinor; Guiry, Michael D.; Boegh, Phillip S.; Pedersen, Henrik Ærenlund; Enghoff, Henrik; von Raab-Straube, Eckhard; Güntsch, Anton; Geoffroy, Marc; Müller, Andreas; Kohlbecker, Andreas; Berendsohn, Walter; Appeltans, Ward; Arvanitidis, Christos; Vanhoorne, Bart; Declerck, Joram; Vandepitte, Leen; Hernandez, Francisco; Nash, Róisín; Costello, Mark John; Ouvrard, David; Bezard-Falgas, Pascale; Bourgoin, Thierry; Wetzel, Florian Tobias; Glöckler, Falko; Korb, Günther; Ring, Caroline; Hagedorn, Gregor; Häuser, Christoph; Aktaç, Nihat; Asan, Ahmet; Ardelean, Adorian; Borges, Paulo Alexandre Vieira; Dhora, Dhimiter; Khachatryan, Hasmik; Malicky, Michael; Ibrahimov, Shaig; Tuzikov, Alexander; De Wever, Aaike; Moncheva, Snejana; Spassov, Nikolai; Chobot, Karel; Popov, Alexi; Boršić, Igor; Sfenthourakis, Spyros; Kõljalg, Urmas; Uotila, Pertti; Olivier, Gargominy; Dauvin, Jean-Claude; Tarkhnishvili, David; Chaladze, Giorgi; Tuerkay, Michael; Legakis, Anastasios; Peregovits, László; Gudmundsson, Gudmundur; Ólafsson, Erling; Lysaght, Liam; Galil, Bella Sarah; Raimondo, Francesco M.; Domina, Gianniantonio; Stoch, Fabio; Minelli, Alessandro; Spungis, Voldermars; Budrys, Eduardas; Olenin, Sergej; Turpel, Armand; Walisch, Tania; Krpach, Vladimir; Gambin, Marie Therese; Ungureanu, Laurentia; Karaman, Gordan; Kleukers, Roy M.J.C.; Stur, Elisabeth; Aagaard, Kaare; Valland, Nils; Moen, Toril Loennechen; Bogdanowicz, Wieslaw; Tykarski, Piotr; Węsławski, Jan Marcin; Kędra, Monika; M. de Frias Martins, Antonio; Abreu, António Domingos; Silva, Ricardo; Medvedev, Sergei; Ryss, Alexander; Šimić, Smiljka; Marhold, Karol; Stloukal, Eduard; Tome, Davorin; Ramos, Marian A.; Valdés, Benito; Pina, Francisco; Kullander, Sven; Telenius, Anders; Gonseth, Yves; Tschudin, Pascal; Sergeyeva, Oleksandra; Vladymyrov, Volodymyr; Rizun, Volodymyr Bohdanovych; Raper, Chris; Lear, Dan; Stoev, Pavel; Penev, Lyubomir; Rubio, Ana Casino; Backeljau, Thierry; Saarenmaa, Hannu; Ulenberg, Sandrine

2015-01-01

Abstract Background Reliable taxonomy underpins communication in all of biology, not least nature conservation and sustainable use of ecosystem resources. The flexibility of taxonomic interpretations, however, presents a serious challenge for end-users of taxonomic concepts. Users need standardised and continuously harmonised taxonomic reference systems, as well as high-quality and complete taxonomic data sets, but these are generally lacking for non-specialists. The solution is in dynamic, expertly curated web-based taxonomic tools. The Pan-European Species-directories Infrastructure (PESI) worked to solve this key issue by providing a taxonomic e-infrastructure for Europe. It strengthened the relevant social (expertise) and information (standards, data and technical) capacities of five major community networks on taxonomic indexing in Europe, which is essential for proper biodiversity assessment and monitoring activities. The key objectives of PESI were: 1) standardisation in taxonomic reference systems, 2) enhancement of the quality and completeness of taxonomic data sets and 3) creation of integrated access to taxonomic information. New information This paper describes the results of PESI and its future prospects, including the involvement in major European biodiversity informatics initiatives and programs. PMID:26491393

Biomimetics in Tribology

NASA Astrophysics Data System (ADS)

Gebeshuber, I. C.; Majlis, B. Y.; Stachelberger, H.

Science currently goes through a major change. Biology is evolving as new Leitwissenschaft, with more and more causation and natural laws being uncovered. The term `technoscience' denotes the field where science and technology are inseparably interconnected, the trend goes from papers to patents, and the scientific `search for truth' is increasingly replaced by search for applications with a potential economic value. Biomimetics, i.e. knowledge transfer from biology to technology, is a field that has the potential to drive major technical advances. The biomimetic approach might change the research landscape and the engineering culture dramatically, by the blending of disciplines. It might substantially support successful mastering of current tribological challenges: friction, adhesion, lubrication and wear in devices and systems from the meter to the nanometer scale. A highly successful method in biomimectics, the biomimicry innovation method, is applied in this chapter to identify nature's best practices regarding two key issues in tribology: maintenance of the physical integrity of a system, and permanent as well as temporary attachment. The best practices identified comprise highly diverse organisms and processes and are presented in a number of tables with detailed references.

A Brief Literature Overview of Various Routes to Biorenewable Fuels from Lipids for the National Alliance for Advanced Biofuels and Bio-products (NAABB) Consortium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Albrecht, Karl O.; Hallen, Richard T.

2011-03-29

Renewable methods of producing transportation fuels are currently the focus of numerous large research efforts across the globe. Renewable fuel produced from algal lipids is one aspect of this research that could have profound implications on future transportation fuel requirements. However, technical challenges remain in several areas of algal-lipid-based fuels. These challenges include the identification and development of robust and productive algal species as well as extraction methods to recover the produced lipids. Not the least of these technical challenges is the conversion of the algae lipids to fungible fuels. This brief literature review focuses primarily on state-of-the-art “downstream” applicationsmore » of producing fuel from fats and lipids, which can be applied to ongoing research with algae-derived lipids.« less

I Got 99 Problems, and eHealth Is One.

PubMed

Wass, Sofie; Vimarlund, Vivian

2017-01-01

Many eHealth initiatives are never implemented or merely end as pilot projects. Previous studies report that organisational, technical and human issues need to be properly taken into consideration if such initiatives are to be successful. The aim of this paper is to explore whether previously identified challenges within the area have remained in the Swedish eHealth setting or whether they have changed. After interviewing experts in eHealth, we present a classification of areas of concern. Recurrence of previously identified challenges was found, but also new issues were identified. The results of the study indicate that there is a need to consider organisational and semantic issues on both national and international levels. Legal and technical challenges still exist but it seems even more important to support eHealth initiatives financially, increase practitioners' knowledge in health informatics and manage new expectations from patients.

Technical challenges in the construction of the steady-state stellarator Wendelstein 7-X

NASA Astrophysics Data System (ADS)

Bosch, H.-S.; Wolf, R. C.; Andreeva, T.; Baldzuhn, J.; Birus, D.; Bluhm, T.; Bräuer, T.; Braune, H.; Bykov, V.; Cardella, A.; Durodié, F.; Endler, M.; Erckmann, V.; Gantenbein, G.; Hartmann, D.; Hathiramani, D.; Heimann, P.; Heinemann, B.; Hennig, C.; Hirsch, M.; Holtum, D.; Jagielski, J.; Jelonnek, J.; Kasparek, W.; Klinger, T.; König, R.; Kornejew, P.; Kroiss, H.; Krom, J. G.; Kühner, G.; Laqua, H.; Laqua, H. P.; Lechte, C.; Lewerentz, M.; Maier, J.; McNeely, P.; Messiaen, A.; Michel, G.; Ongena, J.; Peacock, A.; Pedersen, T. S.; Riedl, R.; Riemann, H.; Rong, P.; Rust, N.; Schacht, J.; Schauer, F.; Schroeder, R.; Schweer, B.; Spring, A.; Stäbler, A.; Thumm, M.; Turkin, Y.; Wegener, L.; Werner, A.; Zhang, D.; Zilker, M.; Akijama, T.; Alzbutas, R.; Ascasibar, E.; Balden, M.; Banduch, M.; Baylard, Ch.; Behr, W.; Beidler, C.; Benndorf, A.; Bergmann, T.; Biedermann, C.; Bieg, B.; Biel, W.; Borchardt, M.; Borowitz, G.; Borsuk, V.; Bozhenkov, S.; Brakel, R.; Brand, H.; Brown, T.; Brucker, B.; Burhenn, R.; Buscher, K.-P.; Caldwell-Nichols, C.; Cappa, A.; Cardella, A.; Carls, A.; Carvalho, P.; Ciupiński, Ł.; Cole, M.; Collienne, J.; Czarnecka, A.; Czymek, G.; Dammertz, G.; Dhard, C. P.; Davydenko, V. I.; Dinklage, A.; Drevlak, M.; Drotziger, S.; Dudek, A.; Dumortier, P.; Dundulis, G.; Eeten, P. v.; Egorov, K.; Estrada, T.; Faugel, H.; Fellinger, J.; Feng, Y.; Fernandes, H.; Fietz, W. H.; Figacz, W.; Fischer, F.; Fontdecaba, J.; Freund, A.; Funaba, T.; Fünfgelder, H.; Galkowski, A.; Gates, D.; Giannone, L.; García Regaña, J. M.; Geiger, J.; Geißler, S.; Greuner, H.; Grahl, M.; Groß, S.; Grosman, A.; Grote, H.; Grulke, O.; Haas, M.; Haiduk, L.; Hartfuß, H.-J.; Harris, J. H.; Haus, D.; Hein, B.; Heitzenroeder, P.; Helander, P.; Heller, R.; Hidalgo, C.; Hildebrandt, D.; Höhnle, H.; Holtz, A.; Holzhauer, E.; Holzthüm, R.; Huber, A.; Hunger, H.; Hurd, F.; Ihrke, M.; Illy, S.; Ivanov, A.; Jablonski, S.; Jaksic, N.; Jakubowski, M.; Jaspers, R.; Jensen, H.; Jenzsch, H.; Kacmarczyk, J.; Kaliatk, T.; Kallmeyer, J.; Kamionka, U.; Karaleviciu, R.; Kern, S.; Keunecke, M.; Kleiber, R.; Knauer, J.; Koch, R.; Kocsis, G.; Könies, A.; Köppen, M.; Koslowski, R.; Koshurinov, J.; Krämer-Flecken, A.; Krampitz, R.; Kravtsov, Y.; Krychowiak, M.; Krzesinski, G.; Ksiazek, I.; Kubkowska, M.; Kus, A.; Langish, S.; Laube, R.; Laux, M.; Lazerson, S.; Lennartz, M.; Li, C.; Lietzow, R.; Lohs, A.; Lorenz, A.; Louche, F.; Lubyako, L.; Lumsdaine, A.; Lyssoivan, A.; Maaßberg, H.; Marek, P.; Martens, C.; Marushchenko, N.; Mayer, M.; Mendelevitch, B.; Mertens, Ph.; Mikkelsen, D.; Mishchenko, A.; Missal, B.; Mizuuchi, T.; Modrow, H.; Mönnich, T.; Morizaki, T.; Murakami, S.; Musielok, F.; Nagel, M.; Naujoks, D.; Neilson, H.; Neubauer, O.; Neuner, U.; Nocentini, R.; Noterdaeme, J.-M.; Nührenberg, C.; Obermayer, S.; Offermanns, G.; Oosterbeek, H.; Otte, M.; Panin, A.; Pap, M.; Paquay, S.; Pasch, E.; Peng, X.; Petrov, S.; Pilopp, D.; Pirsch, H.; Plaum, B.; Pompon, F.; Povilaitis, M.; Preinhaelter, J.; Prinz, O.; Purps, F.; Rajna, T.; Récsei, S.; Reiman, A.; Reiter, D.; Remmel, J.; Renard, S.; Rhode, V.; Riemann, J.; Rimkevicius, S.; Riße, K.; Rodatos, A.; Rodin, I.; Romé, M.; Roscher, H.-J.; Rummel, K.; Rummel, Th.; Runov, A.; Ryc, L.; Sachtleben, J.; Samartsev, A.; Sanchez, M.; Sano, F.; Scarabosio, A.; Schmid, M.; Schmitz, H.; Schmitz, O.; Schneider, M.; Schneider, W.; Scheibl, L.; Scholz, M.; Schröder, G.; Schröder, M.; Schruff, J.; Schumacher, H.; Shikhovtsev, I. V.; Shoji, M.; Siegl, G.; Skodzik, J.; Smirnow, M.; Speth, E.; Spong, D. A.; Stadler, R.; Sulek, Z.; Szabó, V.; Szabolics, T.; Szetefi, T.; Szökefalvi-Nagy, Z.; Tereshchenko, A.; Thomsen, H.; Thumm, M.; Timmermann, D.; Tittes, H.; Toi, K.; Tournianski, M.; Toussaint, U. v.; Tretter, J.; Tulipán, S.; Turba, P.; Uhlemann, R.; Urban, J.; Urbonavicius, E.; Urlings, P.; Valet, S.; Van Eester, D.; Van Schoor, M.; Vervier, M.; Viebke, H.; Vilbrandt, R.; Vrancken, M.; Wauters, T.; Weissgerber, M.; Weiß, E.; Weller, A.; Wendorf, J.; Wenzel, U.; Windisch, T.; Winkler, E.; Winkler, M.; Wolowski, J.; Wolters, J.; Wrochna, G.; Xanthopoulos, P.; Yamada, H.; Yokoyama, M.; Zacharias, D.; Zajac, J.; Zangl, G.; Zarnstorff, M.; Zeplien, H.; Zoletnik, S.; Zuin, M.

2013-12-01

The next step in the Wendelstein stellarator line is the large superconducting device Wendelstein 7-X, currently under construction in Greifswald, Germany. Steady-state operation is an intrinsic feature of stellarators, and one key element of the Wendelstein 7-X mission is to demonstrate steady-state operation under plasma conditions relevant for a fusion power plant. Steady-state operation of a fusion device, on the one hand, requires the implementation of special technologies, giving rise to technical challenges during the design, fabrication and assembly of such a device. On the other hand, also the physics development of steady-state operation at high plasma performance poses a challenge and careful preparation. The electron cyclotron resonance heating system, diagnostics, experiment control and data acquisition are prepared for plasma operation lasting 30 min. This requires many new technological approaches for plasma heating and diagnostics as well as new concepts for experiment control and data acquisition.

Utah's 1988-93 Vocational-Technical Education Master Plan: A Powerful Resource for Human and Economic Development.

ERIC Educational Resources Information Center

Utah State Board of Higher Education, Salt Lake City.

For Utah residents to remain in the forefront or even stay competitive economically, the state's work force must acquire the knowledge and skills that match or exceed those of their most technically advanced competitors. A powerful engine for economic growth is a high-quality system of vocational-technical education. The majority of Utah public…

A Report by the Governor's Task Force on Vocational and Technical Education.

ERIC Educational Resources Information Center

Governor's Task Force on Vocational and Technical Education, Columbus, OH.

On July 19, 1968, a Task Force on Vocational and Technical Education was created by the governor of Ohio to develop proposals for organization, financing, and legislation. Some major problems to which the Task Force gave attention were: (1) the serious gap between the need for and the availability of vocational and technical education, (2) the…

The Technology of Technology Transfer. The Case of the Japan-Singapore Technical Institute. Discussion Paper No. 93.

ERIC Educational Resources Information Center

Araujo e Oliveira, Joao Batista; Pillay, Gerald F.

The new economic and industrial policies of the 1980s called for a major restructuring of the industrial profile of Singapore. The government decided to set up three new technical institutes to prepare and supply skilled workers to new investors: French-, German-, and Japan-Singapore Technical Institutes with the collaboration of the government…

Women and Feminism in Technical Communication: A Qualitative Content Analysis of Journal Articles Published in 1989 through 1997.

ERIC Educational Resources Information Center

Thompson, Isabelle

1999-01-01

Identifies 40 articles about women and feminism published in five technical communication journals in a period of nine years. Notes major themes, all concerning inclusion. Concludes that although research about women and feminism has been accepted as part of the scholarly purview of technical communication, the ways in which this research has…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kovoor-Misra, S.

Technical organizations are not only vulnerable to crises, but have the potential to create catastrophic crises. This has been devastatingly illustrated by recent crises, such as the gas leak in Bhopal, India, the Exxon Valdez oil spill, and the Challenger explosion. Thus, crises preparation for these organizations. This paper describes a Multidimensional Approach to crisis preparation for technical organizations. As part of this approach, come critical factors for crisis preparation are also described. The Multidimensional Approach is derived from the literature and a study of the crisis preparation of nine technical organizations. 28 refs., 3 figs., 4 tab.

Technical Desiderata for the Integration of Genomic Data into Electronic Health Records

PubMed Central

Masys, Daniel R.; Jarvik, Gail P.; Abernethy, Neil F.; Anderson, Nicholas R.; Papanicolaou, George J.; Paltoo, Dina N.; Hoffman, Mark A.; Kohane, Isaac S.; Levy, Howard P.

2012-01-01

The era of “Personalized Medicine,” guided by individual molecular variation in DNA, RNA, expressed proteins and other forms of high volume molecular data brings new requirements and challenges to the design and implementation of Electronic Health Records (EHRs). In this article we describe the characteristics of biomolecular data that differentiate it from other classes of data commonly found in EHRs, enumerate a set of technical desiderata for its management in healthcare settings, and offer a candidate technical approach to its compact and efficient representation in operational systems. PMID:22223081

Communication and Collaboration in Library Technical Services: A Case Study of New York University in Abu Dhabi

ERIC Educational Resources Information Center

Parrott, Justin

2016-01-01

New York University Abu Dhabi Library has developed new strategies to increase efficiency in technical services processing between units based in New York and Abu Dhabi. This case study discusses the challenges specific to the international context and the methods used to overcome them, increase speed processing, and ultimately improve patron…

Vicarious Violence on the Screen: A Challenge to Educators and Families. Technical Assistance Bulletin No. 16. [Updated Version].

ERIC Educational Resources Information Center

Hepburn, Mary A.

This technical bulletin poses questions of concern to law-related educators (LRE) and citizenship educators working to reduce violence among students and the larger community. Maintaining that the sociological implications of violence on television and in video games should be a serious concern to all educators, the bulletin describes the…

78 FR 17871 - Changes To Implement the Technical Corrections to the Leahy-Smith America Invents Act as to Inter...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-25

... rule eliminates the nine-month ``dead zone'' for filing an inter partes review petition challenging a..., section 1(d) of the AIA Technical Corrections Act and this final rule eliminate the nine-month ``dead zone... the nine-month ``dead zone'' as to first-to-invent patents and reissue patents. Costs and Benefits...

Using Simplified English to Identify Potential Problems for Non-Native Speakers in the Language of Engineering Examination Papers

ERIC Educational Resources Information Center

Harrison, Sandra; Morgan, Roger

2012-01-01

There is an increasing sensitivity to the challenges posed by the language of examination papers and of instruction in scientific subjects, especially for non-native speakers of English. It has been observed that in addition to technical subject-specific vocabulary, non-technical words such as instructional verbs have been sources of difficulty,…

77 FR 53912 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; H-1B...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-04

... for OMB Review; Comment Request; H-1B Technical Skills Training Grants and H-1B Jobs and Innovation..., ``H-1B Technical Skills Training Grants and H-1B Jobs and Innovation Accelerator Challenge Grants,'' to the Office of Management and Budget (OMB) for review and approval for use in accordance with the...

Crafting a New Vision for High School: How States Can Join Academic and Technical Studies to Promote More Powerful Learning

ERIC Educational Resources Information Center

Bottoms, Gene; Young, Marna

2008-01-01

The authors advocate harnessing the applied teaching strategies of career/technical education (CTE) and infusing them into college-preparatory academics to transform secondary schools into high-performing centers of learning where students are both challenged and engaged. By pursuing this strategy, say the authors, states can help many more…

Curriculum Integration: Helping Career and Technical Education Students Truly Develop College and Career Readiness

ERIC Educational Resources Information Center

Park, Travis; Pearson, Donna; Richardson, George B.

2017-01-01

All students need to learn how to read, write, solve mathematics problems, and understand and apply scientific principles to succeed in college and/or careers. The challenges posed by entry-level career fields are no less daunting than those posed by college-level study. Thus, career and technical education students must learn effective math,…

Summaries of the Regional Conferences Held in Preparation for the Second International Congress on Technical and Vocational Education.

ERIC Educational Resources Information Center

UNEVOC Info, 1999

1999-01-01

In 1998, five regional conferences were held in preparation for the Second International Congress on Technical and Vocational Education (TVE). The Asia-Pacific regional conference focused on challenges of the 21st century, demands of the world of work, and changing patterns in the delivery of training programs. The European symposium covered five…

The PRO-TECH Program. A Program for Gifted and Talented High School Students in Connecticut's Vocational-Technical School System.

ERIC Educational Resources Information Center

Brann, Ronald E.

This document describes Connecticut's PRO-TECH Program, which is designed to link pupils in vocational-technical schools, resources of school and community, and opportunity for growth in order to teach advanced skills, explore new interests, challenge old ideas, and highlight individual talents. The document consists of sections on the following…

Separate and Unequal at Hillsborough High: A Principal's Challenges in Integrating "Academic" and Career and Technical Education Coursework

ERIC Educational Resources Information Center

Malin, Joel R.; Hackmann, Donald G.

2015-01-01

Dr. Edward White, Hillsborough High School principal, has decided to allocate faculty in-service time to address an unproductive chasm between academic and career and technical education programming within the school, which has created tensions among the faculty. On returning to his office after the professional development session, which was…

The Perkins Act of 2006: Connecting Career and Technical Education with the College and Career Readiness Agenda. Achieve Policy Brief

ERIC Educational Resources Information Center

Meeder, Hans

2008-01-01

Policymakers and educators around the nation are wrestling with an important challenge--how to raise expectations for high school achievement, while increasing relevance and engagement in learning to keep students in school. Career and technical education (CTE) is receiving renewed attention as a strategy for increasing school engagement and rigor…

1969 Proceedings of the Technical Information Advisory Committee...

ERIC Educational Resources Information Center

National Security Industrial Association, Washington, DC.

The meetings were set up to find ways to overcome the barriers that regulate or reduce the flow of scientific/Technical information and data to the user. Giving the user what he needs, when he needs it, and at a cost he can afford is the basic challenge faced by information services. Obtaining information depends on: (1) personal habits; (2)…

Towards Quality Technical Vocational Education and Training (Tvet) Programmes in Nigeria: Challenges and Improvement Strategies

ERIC Educational Resources Information Center

Ayonmike, Chinyere Shirley; Okwelle, P. Chijioke; Okeke, Benjamin Chukwumaijem

2015-01-01

Technical Vocational Education and Training (TVET) is widely recognized as a vital driving force for the socio-economic growth and technological development of nations. In achieving the goals and objectives of TVET in Nigeria, the quality of the programme needs to be improved and sustained. The purpose of this study is to ascertain the challenges…

Evaluation of the Hanford 200 West Groundwater Treatment System: Fluidized Bed Bioreactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Looney, Brian B.; Jackson, Dennis G.; Dickson, John O.

A fluidized bed reactor (FBR) in the 200W water treatment facility at Hanford is removing nitrate from groundwater as part of the overall pump-treat-reinject process. Control of the FBR bed solids has proven challenging, impacting equipment, increasing operations and maintenance (O&M), and limiting the throughput of the facility. In response to the operational challenges, the Department of Energy Richland Office (DOE-RL) commissioned a technical assistance team to facilitate a system engineering evaluation and provide focused support recommendations to the Hanford Team. The DOE Environmental Management (EM) technical assistance process is structured to identify and triage technologies and strategies that addressmore » the target problem(s). The process encourages brainstorming and dialog and allows rapid identification and prioritization of possible options. Recognizing that continuous operation of a large-scale FBR is complex, requiring careful attention to system monitoring data and changing conditions, the technical assistance process focused on explicit identification of the available control parameters (“knobs”), how these parameters interact and impact the FBR system, and how these can be adjusted under different scenarios to achieve operational goals. The technical assistance triage process was performed in collaboration with the Hanford team.« less

The impact of age on the art of mammography and how to adapt accordingly.

PubMed

Lake, B; Cielecki, L; Williams, S; Worrall, C; Metelko, M

2017-11-01

Breast cancer is increasingly a disease of the elderly, and combined with the NHS Breast Screening Extension means that more elderly patients are having mammography. Increasing age can make mammography more technically difficult. This is a technical note detailing the results of a local audit which may be of interest due to potential service implications. A retrospective audit of the first year of screening extension of The Shropshire Breast Screening Programme. Aims to collect data on patient demographics and describe the technical adaptations developed in Shropshire. Breast screening extension has increased by 2.5 times the number of women aged 70-74 screened, and doubled the overall numbers of women over 70 screened. Significantly more older patients are being screened to present technical challenges to a screening programme. Data was obtained from a month of screening showed that 29% of patients over 70 needed extra time for positioning. Reasons included 22% difficulty in obtaining adequate positioning and 15% needed a relative to aid with consent. In the Shropshire screening programme different technical adaptations have been developed and are key to ensuring adequate images. These include double appointments, two radiographers, thorough assessment, steeper angles, seated examinations, from-below imaging and pre-planning for subsequent screen. Significantly more older women are having breast screening due to the increasing incidence of breast cancer and the Breast Screening Programme extension. Increasing age can significantly increase time taken for adequate imaging and present technical challenges. Development of technical adaptations to art of mammography is key to achieve adequate images. Copyright © 2017 The College of Radiographers. Published by Elsevier Ltd. All rights reserved.