Experiment Definition Using the Space Laboratory, Long Duration Exposure Facility, and Space Transportation System Shuttle

NASA Technical Reports Server (NTRS)

Sheppard, Albert P.; Wood, Joan M.

1976-01-01

Candidate experiments designed for the space shuttle transportation system and the long duration exposure facility are summarized. The data format covers: experiment title, Experimenter, technical abstract, benefits/justification, technical discussion of experiment approach and objectives, related work and experience, experiment facts space properties used, environmental constraints, shielding requirements, if any, physical description, and sketch of major elements. Information was also included on experiment hardware, research required to develop experiment, special requirements, cost estimate, safety considerations, and interactions with spacecraft and other experiments.

Preparing Students for Jobs: Managing and Writing for Specialized Magazines.

ERIC Educational Resources Information Center

Eynon, Derry

In this paper, two magazine courses offered at Colorado State University as part of the Technical-Business Journalism concentration are described in terms of course content, class assignments, and course objectives. The course entitled "Writing for Specialized Audiences" assumes that the majority of magazines published today are edited for readers…

10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

Code of Federal Regulations, 2010 CFR

2010-01-01

... analysis of the structures, systems, and components of the reactor to be manufactured, with emphasis upon... assumed for this evaluation should be based upon a major accident, hypothesized for purposes of site... structures, systems, and components with the objective of assessing the risk to public health and safety...

California Community Colleges Economic Development Program Annual Report, 2000-2001.

ERIC Educational Resources Information Center

Ferrier, Kay; Magee, Mike

This document discusses the Small Business Development Center initiative which addresses the needs of California businesses to grow through the delivery of one-on-one counseling, seminars, workshops, conferences, and other technical activities. The community colleges host 21 full centers. Some of the major objectives of the initiative are the…

Operational Initiative Review Report of The Small Business Development Center Initiative.

ERIC Educational Resources Information Center

Orr-Carpenter, Deborah

This document discusses the Small Business Development Center initiative which addresses the needs of California businesses to grow through the delivery of one-on-one counseling, seminars, workshops, conferences, and other technical activities. The community colleges host 21 full centers. Some of the major objectives of the initiative are the…

[Prospects in getting accordance between chemical analytic control means and medical technical requirements to safety system concerning chemical weapons destruction].

PubMed

Rembovskiĭ, V R; Mogilenkova, L A; Savel'eva, E I

2005-01-01

The major unit monitoring chemical weapons destruction objects is a system of chemical analyticcontrol over the technologic process procedures and possibility of environment and workplace pollution withtoxicchemicals and their destruction products. At the same time, physical and chemical control means meet sanitary and hygienic requirements incompletely. To provide efficient control, internationally recognized approaches should be adapted to features of Russian system monitoring pollution of chemical weapons destruction objects with toxic chemicals.

Development of the first infrared satellite observatory

NASA Technical Reports Server (NTRS)

Smith, G. M.; Squibb, G. F.

1984-01-01

A development history is given for the Infrared Astronomical Satelite (IRAS), whose primary mission objective is an unbiased, all-sky survey in the 8-120 micron wavelength range. A point source catalog of more than 200,000 IR sources, to be published later this year, represents the accomplishment of this objective. IRAS has also conducted 10,000 pointed observations of specific objects. Attention is given to the cost increases and schedule slips which resulted from the substantial technical challenges of IRAS hardware and software development, and to the management techniques which had to be employed in this major international project.

Scientific-Technical and Business Careers Training Grant

NASA Technical Reports Server (NTRS)

Conway, Mary P.

2001-01-01

The 1996 renewal of the NGT2-1001 grant included three objectives and expected outcomes. The information highlights the results and progress to address the grant objectives and outcomes for the time period of July 1, 2000 through June 30, 2001. Objective Number One indicated that the internship staff would annually recruit and place at least 90 community college students in internship positions related to their college majors. Internship enrollments for the summer, fall, winter and spring quarters of 2000-2001 show an average enrollment of 121 students per quarter. This number includes (13) interns sponsored by Ames contractors.

Continuing Education for Physicians. Report of a WHO (World Health Organization) Expert Committee. Technical Report Series No. 534.

ERIC Educational Resources Information Center

World Health Organization, Geneva (Switzerland).

The state of continuing education for physicians was examined by a World Health Organization Expert Committee. The study touched on five major areas: (1) the motivation and stimulation during basic medical education and during the physicians professional career; (2) the definition of objectives, selection of instructional methods, and evaluation…

77 FR 21993 - Endangered and Threatened Wildlife and Plants; Notice of Availability of a Technical/Agency Draft...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-12

... encompassed all major rivers in the Mobile Basin, including the Alabama, Tombigbee, and Cahaba River systems... plans. Recovery Plan Components The objective of this plan is to provide a framework for the recovery of... Before including your address, phone number, email address, or other personal identifying information in...

National Project: Increasing Participation of Native Americans in Vocational Education. 1976-1977 Final Report.

ERIC Educational Resources Information Center

Stufflebean, Tana; And Others

The overall objective of the 1977 national project was to assist participating states in increasing the number and participation of Native American students, teachers, and teacher educators in vocational and technical education. Participants in the major training activity (a 3-day workshop) were 15 3-member state teams and about 30 tribal and…

On-The-Job Training and the Prlvate Industry Council: A Technical Assistance Guide.

ERIC Educational Resources Information Center

Norris, Claudia K.

The 1978 reauthorization of the Comprehensive Employment and Training Act (CETA) introduced a new title, Title VII: the Private Sector Initiative Program (PSIP). This title instructs Prime Sponsors to form a new kind of intermediary organization, a Private Industry Council (PIC), which has the major objective of increasing the opportunities of…

Getting Beyond Technical Rationality in Developing Health Behavior Programs With Youth

ERIC Educational Resources Information Center

Perry, Cheryl L.

2004-01-01

Objective: To explore 2 major components of health behavior research, etiologic research and action research. To argue that action research is both an artistic as well as scientific process. Methods: Review of the development process of effective health behavior programs with youth. Review of literature on art as part of the scientific process,…

Telescope technology for space-borne submillimeter astronomy

NASA Technical Reports Server (NTRS)

Lehman, David H.; Helou, George

1990-01-01

The Precision Segmented Reflector (PSR) project which is developing telescope technology needed for future spaceborne submillimeter astronomy missions is described. Four major technical areas are under development. Lighweight composite mirrors and associated materials, precision structures and segmented reflector figure sensing and control are discussed. The objectives of the PSR project, approaches, and project technology status, are reported.

University of Tokyo, Institute of Astronomy

NASA Astrophysics Data System (ADS)

Murdin, P.

2000-11-01

Founded in 1987, the Institute of Astronomy, University of Tokyo, is located at Ohsawa, Mitaka, Japan, 30 km west of central Tokyo. Its objectives are research and education in observational astronomy. It has a staff of 3 professors; 5 associate professors; 8 research associates, 2 technical support staff, 2 administrative officers and several part-time staff (secretary, catering etc). Its major ...

Intraoperative adverse events can be compensated by technical performance in neonates and infants after cardiac surgery: a prospective study.

PubMed

Nathan, Meena; Karamichalis, John M; Liu, Hua; del Nido, Pedro; Pigula, Frank; Thiagarajan, Ravi; Bacha, Emile A

2011-11-01

Our objective was to define the relationship between surgical technical performance score, intraoperative adverse events, and major postoperative adverse events in complex pediatric cardiac repairs. Infants younger than 6 months were prospectively followed up until discharge from the hospital. Technical performance scores were graded as optimal, adequate, or inadequate based on discharge echocardiograms and need for reintervention after initial surgery. Case complexity was determined by Risk Adjustment in Congenital Heart Surgery (RACHS-1) category, and preoperative illness severity was assessed by Pediatric Risk of Mortality (PRISM) III score. Intraoperative adverse events were prospectively monitored. Outcomes were analyzed using nonparametric methods and a logistic regression model. A total of 166 patients (RACHS 4-6 [49%]), neonates [50%]) were observed. Sixty-one (37%) had at least 1 intraoperative adverse event, and 47 (28.3%) had at least 1 major postoperative adverse event. There was no correlation between intraoperative adverse events and RACHS, preoperative PRISM III, technical performance score, or postoperative adverse events on multivariate analysis. For the entire cohort, better technical performance score resulted in lower postoperative adverse events, lower postoperative PRISM, and lower length of stay and ventilation time (P < .001). Patients requiring intraoperative revisions fared as well as patients without, provided the technical score was at least adequate. In neonatal and infant open heart repairs, technical performance score is one of the main predictors of postoperative morbidity. Outcomes are not affected by intraoperative adverse events, including surgical revisions, provided technical performance score is at least adequate. Copyright © 2011 The American Association for Thoracic Surgery. Published by Mosby, Inc. All rights reserved.

Technical Report on Research to Identify, Analyze, and Disseminate Information about Opportunities for Males and Females in Nontraditional Occupations. July 1978 through June 1979.

ERIC Educational Resources Information Center

Carvell, Fred; And Others

This project was conducted to improve the quality and availability of information pertaining to opportunities in nontraditional occupations for use by teachers, counselors, and interested students. The major project objectives were (1) to review current employment patterns in California to identify nontraditional occupations; (2) to collect and…

Status of the NASA YF-12 Propulsion Research Program

NASA Technical Reports Server (NTRS)

Albers, J. A.

1976-01-01

The YF-12 research program was initiated to establish a technology base for the design of an efficient propulsion system for supersonic cruise aircraft. The major technology areas under investigation in this program are inlet design analysis, propulsion system steady-state performance, propulsion system dynamic performance, inlet and engine control systems, and airframe/propulsion system interactions. The objectives, technical approach, and status of the YF-12 propulsion program are discussed. Also discussed are the results obtained to date by the NASA Ames, Lewis, and Dryden research centers. The expected technical results and proposed future programs are also given. Propulsion system configurations are shown.

DETERMINE THE FEASIBILITY OF DEVELOPING A MODEL DESCRIBING THE FLOW OF OCCUPATIONAL AND ECONOMIC INFORMATION INTO THE SECONDARY VOCATIONAL-TECHNICAL SCHOOL. FINAL REPORT.

ERIC Educational Resources Information Center

SILVERN, LEONARD C.

THE MAJOR OBJECTIVES OF THIS FEASIBILITY STUDY WERE (1) TO IDENTIFY INFORMATION SOURCES WHICH FURNISH OCCUPATIONAL AND ECONOMIC DATA TO SECONDARY SCHOOLS, (2) TO SELECT THOSE SOURCES WHICH ARE BELIEVED TO HAVE A MEASURABLE INFLUENCE ON THE VOCATIONAL CURRICULUM, AND (3) TO CATEGORIZE, RELATE, AND COMBINE OR RESTRUCTURE THOSE SOURCES INTO A…

Photovoltaic Performance and Reliability Workshop summary

NASA Astrophysics Data System (ADS)

Kroposki, Benjamin

1997-02-01

The objective of the Photovoltaic Performance and Reliability Workshop was to provide a forum where the entire photovoltaic (PV) community (manufacturers, researchers, system designers, and customers) could get together and discuss technical issues relating to PV. The workshop included presentations from twenty-five speakers and had more than one hundred attendees. This workshop also included several open sessions in which the audience and speakers could discuss technical subjects in depth. Several major topics were discussed including: PV characterization and measurements, service lifetimes for PV devices, degradation and failure mechanisms for PV devices, standardization of testing procedures, AC module performance and reliability testing, inverter performance and reliability testing, standardization of utility interconnect requirements, experience from field deployed systems, and system certification.

Nuclear Technology, Global Warming, and the Politicization of Science

NASA Astrophysics Data System (ADS)

Weart, Spencer

2016-03-01

Since the mid 20th century physical scientists have engaged in two fierce public debates on issues that posed existential risks to modern society: nuclear weapons and global warming. The two overlapped with a third major debate over the deployment of nuclear power reactors. Each controversy included technical disagreements raised by a minority among the scientists themselves. Despite efforts to deal with the issues objectively, the scientists became entangled in left vs. right political polarization. All these debates, but particularly the one over climate change, resulted in a deterioration of public faith in the objectivity and integrity of scientists.

The Systems Autonomy Demonstration Project - Catalyst for Space Station advanced automation

NASA Technical Reports Server (NTRS)

Healey, Kathleen J.

1988-01-01

The Systems Autonomy Demonstration Project (SADP) was initiated by NASA to address the advanced automation needs for the Space Station program. The application of advanced automation to the Space Station's operations management system (OMS) is discussed. The SADP's future goals and objectives are discussed with respect to OMS functional requirements, design, and desired evolutionary capabilities. Major technical challenges facing the designers, developers, and users of the OMS are identified in order to guide the definition of objectives, plans, and scenarios for future SADP demonstrations, and to focus the efforts on the supporting research.

AgRISTARS: Agriculture and resources inventory surveys through aerospace remote sensing

NASA Technical Reports Server (NTRS)

1981-01-01

The major objectives and FY 1980 accomplishments are described of a long term program designed to determine the usefulness, cost, and extent to which aerospace remote sensing data can be integrated into existing or future USDA systems to improve the objectivity, reliability, timeliness, and adequacy of information. A general overview, the primary and participating agencies, and the technical highlights of each of the following projects are presented: early warning/crop condition assessment; foreign commodity production forecasting; yield model development; supporting research; soil moisture; domestic crops and land cover; renewable resources inventory; and conservation and pollution.

Study of low density air transportation concepts

NASA Technical Reports Server (NTRS)

Webb, H. M.

1972-01-01

Low density air transport refers to air service to sparsely populated regions. There are two major objectives. The first is to examine those characteristics of sparsely populated areas which pertain to air transportation. This involves determination of geographical, commercial and population trends, as well as those traveler characteristics which affect the viability of air transport in the region. The second objective is to analyze the technical, economic and operational characteristics of low density air service. Two representative, but diverse arenas, West Virginia and Arizona, were selected for analysis: The results indicate that Arizona can support air service under certain assumptions whereas West Virginia cannot.

Guiding bioprocess design by microbial ecology.

PubMed

Volmer, Jan; Schmid, Andreas; Bühler, Bruno

2015-06-01

Industrial bioprocess development is driven by profitability and eco-efficiency. It profits from an early stage definition of process and biocatalyst design objectives. Microbial bioprocess environments can be considered as synthetic technical microbial ecosystems. Natural systems follow Darwinian evolution principles aiming at survival and reproduction. Technical systems objectives are eco-efficiency, productivity, and profitable production. Deciphering technical microbial ecology reveals differences and similarities of natural and technical systems objectives, which are discussed in this review in view of biocatalyst and process design and engineering strategies. Strategies for handling opposing objectives of natural and technical systems and for exploiting and engineering natural properties of microorganisms for technical systems are reviewed based on examples. This illustrates the relevance of considering microbial ecology for bioprocess design and the potential for exploitation by synthetic biology strategies. Copyright © 2015 Elsevier Ltd. All rights reserved.

Crowdsourcing: a valid alternative to expert evaluation of robotic surgery skills.

PubMed

Polin, Michael R; Siddiqui, Nazema Y; Comstock, Bryan A; Hesham, Helai; Brown, Casey; Lendvay, Thomas S; Martino, Martin A

2016-11-01

Robotic-assisted gynecologic surgery is common, but requires unique training. A validated assessment tool for evaluating trainees' robotic surgery skills is Robotic-Objective Structured Assessments of Technical Skills. We sought to assess whether crowdsourcing can be used as an alternative to expert surgical evaluators in scoring Robotic-Objective Structured Assessments of Technical Skills. The Robotic Training Network produced the Robotic-Objective Structured Assessments of Technical Skills, which evaluate trainees across 5 dry lab robotic surgical drills. Robotic-Objective Structured Assessments of Technical Skills were previously validated in a study of 105 participants, where dry lab surgical drills were recorded, de-identified, and scored by 3 expert surgeons using the Robotic-Objective Structured Assessments of Technical Skills checklist. Our methods-comparison study uses these previously obtained recordings and expert surgeon scores. Mean scores per participant from each drill were separated into quartiles. Crowdworkers were trained and calibrated on Robotic-Objective Structured Assessments of Technical Skills scoring using a representative recording of a skilled and novice surgeon. Following this, 3 recordings from each scoring quartile for each drill were randomly selected. Crowdworkers evaluated the randomly selected recordings using Robotic-Objective Structured Assessments of Technical Skills. Linear mixed effects models were used to derive mean crowdsourced ratings for each drill. Pearson correlation coefficients were calculated to assess the correlation between crowdsourced and expert surgeons' ratings. In all, 448 crowdworkers reviewed videos from 60 dry lab drills, and completed a total of 2517 Robotic-Objective Structured Assessments of Technical Skills assessments within 16 hours. Crowdsourced Robotic-Objective Structured Assessments of Technical Skills ratings were highly correlated with expert surgeon ratings across each of the 5 dry lab drills (r ranging from 0.75-0.91). Crowdsourced assessments of recorded dry lab surgical drills using a validated assessment tool are a rapid and suitable alternative to expert surgeon evaluation. Copyright © 2016 Elsevier Inc. All rights reserved.

Mediation of Artefacts, Tools and Technical Objects: An International and French Perspective

ERIC Educational Resources Information Center

Impedovo, Maria Antonietta; Andreucci, Colette; Ginestié, Jacques

2017-01-01

In this article we present a review of literature on the concept of Artefact, Tool and Technical Object in the light of sociocultural approach. Particular attention is given to present and discuss the French research tradition on the Technical Object and Technological education. The aim is to give a broad perspective to explore the mediation…

Technical Objects between Categorisation and Learning: An Exploratory Case Study in French Middle School

ERIC Educational Resources Information Center

Impedovo, M. A.; Andreucci, C.; Delserieys-Pedregosa, A.; Coiffard, C.; Ginestié, J.

2015-01-01

In this article we present exploratory research carried out in order to understand how students (from 12 to 14 years old) relate to technical objects. It uses technical objects that are part of everyday life and mediated reality. A questionnaire was administered to 57 students in French classes. The questionnaire was composed of three parts: 1)…

High Speed Research Program Sonic Fatigue

NASA Technical Reports Server (NTRS)

Rizzi, Stephen A. (Technical Monitor); Beier, Theodor H.; Heaton, Paul

2005-01-01

The objective of this sonic fatigue summary is to provide major findings and technical results of studies, initiated in 1994, to assess sonic fatigue behavior of structure that is being considered for the High Speed Civil Transport (HSCT). High Speed Research (HSR) program objectives in the area of sonic fatigue were to predict inlet, exhaust and boundary layer acoustic loads; measure high cycle fatigue data for materials developed during the HSR program; develop advanced sonic fatigue calculation methods to reduce required conservatism in airframe designs; develop damping techniques for sonic fatigue reduction where weight effective; develop wing and fuselage sonic fatigue design requirements; and perform sonic fatigue analyses on HSCT structural concepts to provide guidance to design teams. All goals were partially achieved, but none were completed due to the premature conclusion of the HSR program. A summary of major program findings and recommendations for continued effort are included in the report.

NASA-UVa Light Aerospace Alloy and Structures Technology Program: Aluminum-Based Materials for High Speed Aircraft

NASA Technical Reports Server (NTRS)

Starke, E. A., Jr. (Editor)

1996-01-01

This report is concerned with 'Aluminum-Based Materials for High Speed Aircraft' which was initiated to identify the technology needs associated with advanced, low-cost aluminum base materials for use as primary structural materials. Using a reference baseline aircraft, these materials concept will be further developed and evaluated both technically and economically to determine the most attractive combinations of designs, materials, and manufacturing techniques for major structural sections of an HSCT. Once this has been accomplished, the baseline aircraft will be resized, if applicable, and performance objectives and economic evaluations made to determine aircraft operating costs. The two primary objectives of this study are: (1) to identify the most promising aluminum-based materials with respect to major structural use on the HSCT and to further develop those materials, and (2) to assess these materials through detailed trade and evaluation studies with respect to their structural efficiency on the HSCT.

Preliminary Design of a Modular Unmanned Research Vehicle. Volume 2. Subsystem Technical Development Design Study

DTIC Science & Technology

1988-12-01

members of our committee for their contributions to our work : Major Lanson Hudson, Lieutenant Colonel Paul King, and Dr. Curtis Spenny provided many... Effectiveness MSL Mean Sea Level MURV Modular Unmanned Research Vehicle n.p. neutral point NASA National Aeronautics and Space Administration PAM Pulse Amplitude...subsystem objectives and measures of effectiveness , see Volume One, Figure 2.2 The systems approach was then applied to generate and select the best

B-70 Aircraft Study. Volume 1

NASA Technical Reports Server (NTRS)

Johnson, V. T.

1972-01-01

This Phase 2 final report for the B-70 aircraft study contains the data location matrix, which provides a summary of the major cost, schedule, and technical items provided in the report; work breakdown structure; cost definitions; and B-70 program level summary data. The Phase 2 objective was to provide the B-70 aircraft data in accordance with the approved study plan. Several minor modifications to the original plan have been made as the result of the Phase 2 effort.

Commission 5: Documentation and Astronomical Data

NASA Astrophysics Data System (ADS)

Norris, Raymond P.; Ohishi, Masatoshi; Genova, Françoise; Grothkopf, Uta; Malkov, Oleg Yu.; Pence, William D.; Schmitz, Marion; Hanisch, Robert J.; Zhou, Xu

IAU Commission 5 deals with data management issues, and its working groups and task groups deal specifically with information handling, with data centres and networks, with technical aspects of collection, archiving, storage and dissemination of data, with designations and classification of astronomical objects, with library services, editorial policies, computer communications, ad hoc methodologies, and with various standards, reference frames, etc., FITS, astronomys Flexible Image Transport System, the major data exchange format, is controlled, maintained and updated by the Working Group FITS.

COMO: a numerical model for predicting furnace performance in axisymmetric geometries. Volume 1. Technical summary. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fiveland, W.A.; Oberjohn, W.J.; Cornelius, D.K.

1985-12-01

This report summarizes the work conducted during a 30-month contract with the United States Department of Energy (DOE) Pittsburgh Energy Technology Center (PETC). The general objective is to develop and verify a computer code capable of modeling the major aspects of pulverized coal combustion. Achieving this objective will lead to design methods applicable to industrial and utility furnaces. The combustion model (COMO) is based mainly on an existing Babcock and Wilcox (B and W) computer program. The model consists of a number of relatively independent modules that represent the major processes involved in pulverized coal combustion: flow, heterogeneous and homogeneousmore » chemical reaction, and heat transfer. As models are improved or as new ones are developed, this modular structure allows portions of the COMO model to be updated with minimal impact on the remainder of the program. The report consists of two volumes. This volume (Volume 1) contains a technical summary of the COMO model, results of predictions for gas phase combustion, pulverized coal combustion, and a detailed description of the COMO model. Volume 2 is the Users Guide for COMO and contains detailed instructions for preparing the input data and a description of the program output. Several example cases have been included to aid the user in usage of the computer program for pulverized coal applications. 66 refs., 41 figs., 21 tabs.« less

Description and status update on GELLO: a proposed standardized object-oriented expression language for clinical decision support.

PubMed

Sordo, Margarita; Boxwala, Aziz A; Ogunyemi, Omolola; Greenes, Robert A

2004-01-01

A major obstacle to sharing computable clinical knowledge is the lack of a common language for specifying expressions and criteria. Such a language could be used to specify decision criteria, formulae, and constraints on data and action. Al-though the Arden Syntax addresses this problem for clinical rules, its generalization to HL7's object-oriented data model is limited. The GELLO Expression language is an object-oriented language used for expressing logical conditions and computations in the GLIF3 (GuideLine Interchange Format, v. 3) guideline modeling language. It has been further developed under the auspices of the HL7 Clinical Decision Support Technical Committee, as a proposed HL7 standard., GELLO is based on the Object Constraint Language (OCL), because it is vendor-independent, object-oriented, and side-effect-free. GELLO expects an object-oriented data model. Although choice of model is arbitrary, standardization is facilitated by ensuring that the data model is compatible with the HL7 Reference Information Model (RIM).

A novel approach to assessing technical competence of colorectal surgery residents: the development and evaluation of the Colorectal Objective Structured Assessment of Technical Skill (COSATS).

PubMed

de Montbrun, Sandra L; Roberts, Patricia L; Lowry, Ann C; Ault, Glenn T; Burnstein, Marcus J; Cataldo, Peter A; Dozois, Eric J; Dunn, Gary D; Fleshman, James; Isenberg, Gerald A; Mahmoud, Najjia N; Reznick, Richard K; Satterthwaite, Lisa; Schoetz, David; Trudel, Judith L; Weiss, Eric G; Wexner, Steven D; MacRae, Helen

2013-12-01

To develop and evaluate an objective method of technical skills assessment for graduating subspecialists in colorectal (CR) surgery-the Colorectal Objective Structured Assessment of Technical Skill (COSATS). It may be reasonable for the public to assume that surgeons certified as competent have had their technical skills assessed. However, technical skill, despite being the hallmark of a surgeon, is not directly assessed at the time of certification by surgical boards. A procedure-based, multistation technical skills examination was developed to reflect a sample of the range of skills necessary for CR surgical practice. These consisted of bench, virtual reality, and cadaveric models. Reliability and construct validity were evaluated by comparing 10 graduating CR residents with 10 graduating general surgery (GS) residents from across North America. Expert CR surgeons, blinded to level of training, evaluated performance using a task-specific checklist and a global rating scale. The mean global rating score was used as the overall examination score and a passing score was set at "borderline competent for CR practice." The global rating scale demonstrated acceptable interstation reliability (0.69) for a homogeneous group of examinees. Both the overall checklist and global rating scores effectively discriminated between CR and GS residents (P < 0.01), with 27% of the variance attributed to level of training. Nine CR residents but only 3 GS residents were deemed competent. The Colorectal Objective Structured Assessment of Technical Skill effectively discriminated between CR and GS residents. With further validation, the Colorectal Objective Structured Assessment of Technical Skill could be incorporated into the colorectal board examination where it would be the first attempt of a surgical specialty to formally assess technical skill at the time of certification.

Tactical and operational response to major incidents: feasibility and reliability of skills assessment using novel virtual environments.

PubMed

Cohen, Daniel; Sevdalis, Nick; Patel, Vishal; Taylor, Michael; Lee, Henry; Vokes, Mick; Heys, Mick; Taylor, David; Batrick, Nicola; Darzi, Ara

2013-07-01

To determine feasibility and reliability of skills assessment in a multi-agency, triple-site major incident response exercise carried out in a virtual world environment. Skills assessment was carried out across three scenarios. The pre-hospital scenario required paramedics to triage and treat casualties at the site of an explosion. Technical skills assessment forms were developed using training syllabus competencies and national guidelines identified by pre-hospital response experts. Non-technical skills were assessed using a seven-point scale previously developed for use by pre-hospital paramedics. The two in-hospital scenarios, focusing on a trauma team leader and a silver/clinical major incident co-ordinator, utilised the validated Trauma-NOTECHS scale to assess five domains of performance. Technical competencies were assessed using an ATLS-style competency scale for the trauma scenario. For the silver scenario, the assessment document was developed using competencies described from a similar role description in a real-life hospital major incident plan. The technical and non-technical performance of all participants was assessed live by two experts in each of the three scenarios and inter-assessor reliability was computed. Participants also self-assessed their performance using identical proformas immediately after the scenarios were completed. Self and expert assessments were correlated (assessment cross-validation). Twenty-three participants underwent all scenarios and assessments. Performance assessments were feasible for both experts as well as the participants. Non-technical performance was generally scored higher than technical performance. Very good inter-rater reliability was obtained between expert raters across all scenarios and both technical and non-technical aspects of performance (reliability range 0.59-0.90, Ps<0.01). Significant positive correlations were found between self and expert assessment in technical skills across all three scenarios (correlation range 0.52-0.84, Ps<0.05), although no such correlations were observed in non-technical skills. This study establishes feasibility and reliability of virtual environment technical and non-technical skills assessment in major incident scenarios for the first time. The development for further scenarios and validated assessment scales will enable major incident planners to utilise virtual technologies for improved major incident preparation and training. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Percutaneous Dual-Switching Monopolar Radiofrequency Ablation Using a Separable Clustered Electrode: A Preliminary Study

PubMed Central

Choi, Tae Won; Lee, Dong Ho; Lee, Jeong-Hoon; Yu, Su Jong; Kim, Yoon Jun; Yoon, Jung-Hwan; Han, Joon Koo

2017-01-01

Objective To prospectively evaluate the safety and therapeutic effectiveness of dual-switching monopolar (DSM) radiofrequency ablation (RFA) for the treatment of hepatocellular carcinoma (HCC), and to retrospectively compare the results with those of single-switching monopolar (SSM) RFA in a historical control group. Materials and Methods This study was approved by the Institutional Review Board, with informed consent obtained from all patients. Fifty-two HCC patients who underwent DSM-RFA using a separable clustered electrode and dual-generators were prospectively enrolled. Technical parameters, complications, technical success, technical effectiveness, and local tumor progression (LTP) rates were evaluated by means of post-procedural and follow-up imaging. Thereafter, the outcome of DSM-RFA was compared with those of 249 retrospectively included HCC patients treated with SSM-RFA. Results There were two major complications (3.8%, 2/52) including pleural and pericardial effusion in the DSM-RFA group. The DSM-RFA yielded a 100% technical success rate, a 98.1% technical effectiveness rate, and a 4.3% 2-year LTP rate. In a retrospective comparison between the two groups, DSM-RFA created significantly larger ablation volume (4.20 ± 2.07 cm3/min vs. 3.03 ± 1.99 cm3/min, p < 0.01), and delivered higher energy (1.43 ± 0.37 kcal/min vs. 1.25 ± 0.50 kcal/min, p < 0.01) per given time, than SSM-RFA. There was no significant difference in major procedure-related complications (3.8% vs. 4.4%) and technical effectiveness rate (98.1% vs. 96.4%) between the two groups (p = 1.00). In addition, the 2-year LTP rate of DSM-RFA and SSM-RFA were 4.3% and 10.1%, respectively (p = 0.15). Conclusion DSM-RFA using a separable clustered electrode is safe and provides high local tumor control and good preliminary clinical outcome for small HCCs, which are at least comparable to those of SSM-RFA. PMID:28860897

7 CFR 1775.33 - Objectives.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Objectives. 1775.33 Section 1775.33 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE (CONTINUED) TECHNICAL ASSISTANCE GRANTS Technical Assistance and Training Grants § 1775.33 Objectives. The...

Collected software engineering papers, volume 9

NASA Technical Reports Server (NTRS)

1991-01-01

This document is a collection of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) from November 1990 through October 1991. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. This is the ninth such volume of technical papers produced by the SEL. Although these papers cover several topics related to software engineering, they do not encompass the entire scope of SEL activities and interests. For the convenience of this presentation, the eight papers contained here are grouped into three major categories: (1) software models studies; (2) software measurement studies; and (3) Ada technology studies. The first category presents studies on reuse models, including a software reuse model applied to maintenance and a model for an organization to support software reuse. The second category includes experimental research methods and software measurement techniques. The third category presents object-oriented approaches using Ada and object-oriented features proposed for Ada. The SEL is actively working to understand and improve the software development process at GSFC.

Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spivey, James J.

The research summarized here has the goal of developing a fundamental understanding of how catalysts work. These materials are demonstrably essential to our daily life, from the cars we drive to the clothes we wear. Our Center advances the science behind how we prepare, analyze, and describe catalysts. This has been identified by one of the documents guiding Federal research objectives (Directing Matter and Energy: Five Challenges for Science and the Imagination): “Major challenges in heterogeneous catalysis are to more clearly define the nature of the active sites, to engineer at the molecular level catalysis with designed properties in threemore » dimensions, and to create new catalysts for new transformations.” This directly addresses this objective.« less

Tether Dynamics Simulation

NASA Technical Reports Server (NTRS)

1987-01-01

The proceedings of the conference are presented. The objective was to provide a forum for the discussion of the structure and status of existing computer programs which are used to simulate the dynamics of a variety of tether applications in space. A major topic was different simulation models and the process of validating them. Guidance on future work in these areas was obtained from a panel discussion; the panel was composed of resource and technical managers and dynamic analysts in the tether field. The conclusions of this panel are also presented.

Machine-aided indexing for NASA STI

NASA Technical Reports Server (NTRS)

Wilson, John

1987-01-01

One of the major components of the NASA/STI processing system is machine-aided indexing (MAI). MAI is a computer process that generates a set of indexing terms selected from NASA's thesaurus, is used for indexing technical reports, is based on text, and is reviewed by indexers. This paper summarizes the MAI objectives and discusses the NASA Lexical Dictionary, subject switching, and phrase matching or natural languages. The benefits of using MAI are mentioned, and MAI production improvement and the future of MAI are briefly addressed.

Mobilization and Defense Management Technical Reports Series. Achievement of Industrial Mobilization Objectives in an Economically Interdependent World.

DTIC Science & Technology

1983-05-01

maintenance of the essential industrial base and to put in place the framework and processes---’ DD I O 1473 £O,TION OF I NOV65 IS OBSOLETE{ SECjBITY...the essential indu,, ......... -: -, :.It .n pl3ce the framework and processes necessary to resolve the conflict between liberal trade and national...domestic capabilities of selected industries essential to national security. Major Recommendations 1. Modify U.S. trade policy to allow for goverr ent

Relations between phytoplankton growth rates and nutrient dynamics in Lake Norman, North Carolina. Technical report series

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rodriguez, M.S.

A baseline study of phytoplankton production and nutrient dynamics was conducted on Lake Norman, NC, a 13000-ha, warm-monomictic reservoir, prior to the initiation of thermal inputs from an 1180-MW nuclear electric generation facility. The objective of the study was to identify the major physical, chemical and biological processes controlling nutrient dynamics in Lake Norman, with specific reference to the impact of phytoplankton production on the cycling of carbon, nitrogen and phosphorus.

The ac power system testbed

NASA Technical Reports Server (NTRS)

Mildice, J.; Sundberg, R.

1987-01-01

The object of this program was to design, build, test, and deliver a high frequency (20 kHz) Power System Testbed which would electrically approximate a single, separable power channel of an IOC Space Station. That program is described, including the technical background, and the results are discussed showing that the major assumptions about the characteristics of this class of hardware (size, mass, efficiency, control, etc.) were substantially correct. This testbed equipment was completed and delivered and is being operated as part of the Space Station Power System Test Facility.

Web vulnerability study of online pharmacy sites.

PubMed

Kuzma, Joanne

2011-01-01

Consumers are increasingly using online pharmacies, but these sites may not provide an adequate level of security with the consumers' personal data. There is a gap in this research addressing the problems of security vulnerabilities in this industry. The objective is to identify the level of web application security vulnerabilities in online pharmacies and the common types of flaws, thus expanding on prior studies. Technical, managerial and legal recommendations on how to mitigate security issues are presented. The proposed four-step method first consists of choosing an online testing tool. The next steps involve choosing a list of 60 online pharmacy sites to test, and then running the software analysis to compile a list of flaws. Finally, an in-depth analysis is performed on the types of web application vulnerabilities. The majority of sites had serious vulnerabilities, with the majority of flaws being cross-site scripting or old versions of software that have not been updated. A method is proposed for the securing of web pharmacy sites, using a multi-phased approach of technical and managerial techniques together with a thorough understanding of national legal requirements for securing systems.

Technical Writing: Past, Present and Future

NASA Technical Reports Server (NTRS)

Mathes, J. C. (Compiler); Pinelli, T. E. (Compiler)

1981-01-01

The training of technical writers and the objectives of such education are discussed. Special emphasis was placed on the communication between technical personnel and non-technical personnel. The liabilities that affect technical writers were also discussed.

System Engineering of Aerospace and Advanced Technology Programs at AN Astronautics Company

NASA Astrophysics Data System (ADS)

Kennedy, Mike O.

The purpose of this Record of Study is to document an internship with the Martin Marietta Astronautics Group in Denver, Colorado that was performed in partial fulfillment of the requirements for the Doctor of Engineering degree at Texas A&M University, and to demonstrate that the internship objectives have been met. The internship included assignments with two Martin Marietta companies, on three different programs and in four areas of engineering. The Record of Study takes a first-hand look at system engineering, SDI and advanced program management, and the way Martin Marietta conducts business. The five internship objectives were related to assignments in system modeling, system integration, engineering analysis and technical management. In support of the first objective, the effects of thermally and mechanically induced mirror surface distortions upon the wavefront intensity field of a high energy laser beam passing through the optical train of a space-based laser system were modeled. To satisfy the second objective, the restrictive as opposed to the broad interpretation of the 1972 ABM Treaty, and the capability of the Strategic Defense Initiative Zenith Star Program to comply with the Treaty were evaluated. For the third objective, the capability of Martin Marietta to develop an automated analysis system to integrate and analyze Superconducting Super Collider detector designs was investigated. For the fourth objective, the thermal models that were developed in support of the Small Intercontinental Ballistic Missile flight tests were described. And in response to the fifth objective, the technical management role of the Product Integrity Engineer assigned to the Zenith Star spacecraft's Beam Control and Transfer Subsystem was discussed. This Record of Study explores the relationships between the engineering, business, security and social concerns associated with the practice of engineering and the management of programs by a major defense contractor.

[Governance of HIV/AIDS organizations in Bobo-Dioulasso (Burkina Faso)].

PubMed

Sanon, Anselme; Berthé, Abdramane; Traoré, Isidore; Ouédraogo, Salif; Etoudji, Albert; Konaté, Issouf; Thiénou, Jean Richard; Konaté, Blahima; Barbari, Aboubaracri; Soulama, Achille; Nagot, Nicolas

2014-01-01

Although HIV/AIDS organizations continue to play a major role in the fight against pandemic HIV infections, they are still faced with enormous governance challenges that impair their operations / interventions and their sustainability. The objective of this study was to develop an inventory of the quality of governance within HIV/AIDS organizations in Bobo-Dioulasso. This qualitative research was conducted in 40 organizations from Bobo-Dioulasso. Qualitative data were collected over a 45-day period using an interview guide. Thematic analysis of the data was performed and the results were reported. Although all 40 organizations had established good governance mechanisms, only fifteen complied with the major rules of democratic functioning and the roles of the various bodies. The majority of these organizations (29/40) ignored many democratic rules. The number of members required for the Executive Board was not met in 29/40 organizations resulting in monopolization of decision-making by a handful of people. Technical and financial reports were not published, resulting in limited access to information on the organization's activities. Gender equality also constituted a weakness. Application of good governance principles was limited in these organizations. Organization members, leaders and technical and financial partners must reinforce good governance efforts in order to improve good governance in these organizations.

Numerical simulation of deformation and failure processes of a complex technical object under impact loading

NASA Astrophysics Data System (ADS)

Kraus, E. I.; Shabalin, I. I.; Shabalin, T. I.

2018-04-01

The main points of development of numerical tools for simulation of deformation and failure of complex technical objects under nonstationary conditions of extreme loading are presented. The possibility of extending the dynamic method for construction of difference grids to the 3D case is shown. A 3D realization of discrete-continuum approach to the deformation and failure of complex technical objects is carried out. The efficiency of the existing software package for 3D modelling is shown.

Materials education activities

NASA Technical Reports Server (NTRS)

Ries, Heidi R.; Harris, Jonice; Leake, Woodrow W.; Bunnell, L. Roy; Berrettini, Robert

1993-01-01

Last year, at NEW: Update '91, a panel discussion was held to address the unique difficulties of attracting and retaining minorities and women in technical studies. Unfortunately, retention in technical majors is a problem of varying proportions for the entire student population, and must be improved in order to maintain the strength of the nation's industrial base. To investigate the cause of student attrition in technical majors, in-depth interviews of both current and former (non-graduating) engineering students at four colleges and universities in Colorado were conducted by Hewitt and Seymour. They found that there was no significant difference in the level of high school preparation and undergraduate academic performance in these two groups, despite the prevailing faculty perception that most students who switch from technical to nontechnical majors were underprepared. The majority of engineering students who changed majors reported that they were turned off by science, while one-third complained of poor teaching.

Recovery Act: Pilot Integrated Cellulosic Biorefinery Operations to Fuel Ethanol

DOE Office of Scientific and Technical Information (OSTI.GOV)

Javers, Jeremy

DOE EE002875 Technical Report Public Release. The objective was to leverage ICM’s pre-existing corn to ethanol pilot plant to build and to commission a fully functional pilot integrated cellulosic biorefinery. ICM’s Integrated Biorefinery (IBR) project was designed to achieve four major objectives. These primary goals were achieved during the performance period from December 2009 – August 2015. The design and construction phase took place from December 2009 until August 2011, with an increase in budget of nearly 4 million dollars. This increased cost was offset by operational changes, so the amount spent for the overall project increased by less thanmore » $500,000. There were three 1,000-hour performance test conducted, which produced cellulosic feedstock.« less

[Ecological and economic approaches to removing radioactively dangerous objects from service].

PubMed

Korenkov, I P; Lashchenova, T N; Neveĭkin, P P; Shandala, N K; Veselov, E I; Maksimova, O A

2011-01-01

The paper considers major ecological and economic problems when removing radiation dangerous objects from service and rehabilitating the areas, which require their solution: the absence of specific guidelines for ranking the contaminated lands exposed to radioactive and chemical pollution from the potential risk to the population and environment; no clear criteria for ceasing area rehabilitation works; radiation exposure levels for the population living in the areas after rehabilitation; allowable levels of residual specific activity, and levels of heavy metals in soil, surface and underground water and bed sediment. The cost such works is the most important and decisive problem. A decision-making algorithm consisting of three main blocks: organizational-technical, engineering, geological and medicoecological measures is proposed to solve managerial, economic, and scientific problems.

Studies on combined model based on functional objectives of large scale complex engineering

NASA Astrophysics Data System (ADS)

Yuting, Wang; Jingchun, Feng; Jiabao, Sun

2018-03-01

As various functions were included in large scale complex engineering, and each function would be conducted with completion of one or more projects, combined projects affecting their functions should be located. Based on the types of project portfolio, the relationship of projects and their functional objectives were analyzed. On that premise, portfolio projects-technics based on their functional objectives were introduced, then we studied and raised the principles of portfolio projects-technics based on the functional objectives of projects. In addition, The processes of combined projects were also constructed. With the help of portfolio projects-technics based on the functional objectives of projects, our research findings laid a good foundation for management of large scale complex engineering portfolio management.

Learning Objects and Virtual Learning Environments Technical Evaluation Criteria

ERIC Educational Resources Information Center

Kurilovas, Eugenijus; Dagiene, Valentina

2009-01-01

The main scientific problems investigated in this article deal with technical evaluation of quality attributes of the main components of e-Learning systems (referred here as DLEs--Digital Libraries of Educational Resources and Services), i.e., Learning Objects (LOs) and Virtual Learning Environments (VLEs). The main research object of the work is…

Forest health monitoring: 2007 national technical report

Treesearch

Barbara L. Conkling

2011-01-01

The Forest Health Monitoring Program produces an annual technical report that has two main objectives. The first objective is to present information about forest health from a national perspective. The second objective is to present examples of useful techniques for analyzing forest health data new to the annual national reports and new applications of techniques...

Wind Fins: Novel Lower-Cost Wind Power System

DOE Office of Scientific and Technical Information (OSTI.GOV)

David C. Morris; Dr. Will D. Swearingen

This project evaluated the technical feasibility of converting energy from the wind with a novel “wind fin” approach. This patent-pending technology has three major components: (1) a mast, (2) a vertical, hinged wind structure or fin, and (3) a power takeoff system. The wing structure responds to the wind with an oscillating motion, generating power. The overall project goal was to determine the basic technical feasibility of the wind fin technology. Specific objectives were the following: (1) to determine the wind energy-conversion performance of the wind fin and the degree to which its performance could be enhanced through basic designmore » improvements; (2) to determine how best to design the wind fin system to survive extreme winds; (3) to determine the cost-effectiveness of the best wind fin designs compared to state-of-the-art wind turbines; and (4) to develop conclusions about the overall technical feasibility of the wind fin system. Project work involved extensive computer modeling, wind-tunnel testing with small models, and testing of bench-scale models in a wind tunnel and outdoors in the wind. This project determined that the wind fin approach is technically feasible and likely to be commercially viable. Project results suggest that this new technology has the potential to harvest wind energy at approximately half the system cost of wind turbines in the 10kW range. Overall, the project demonstrated that the wind fin technology has the potential to increase the economic viability of small wind-power generation. In addition, it has the potential to eliminate lethality to birds and bats, overcome public objections to the aesthetics of wind-power machines, and significantly expand wind-power’s contribution to the national energy supply.« less

The RAAF Logistics Study. Volume 3,

DTIC Science & Technology

human activity system which has been analysed by the Central Studies Establishment on behalf of the Defence Logistics Organisation. This work, now reported on, stems from a conviction that improved decision making can flow from an enhanced and integrated understanding of the activities necessary to fulfil the objectives of the system, by those involved in it or affected by it. This particular Volume deals with the description, using the Soft Systems Methodology described in Volume 1, of the RAAF Technical System which constitutes a major component of the overall RAAF

A market survey of geothermal wellhead power generation systems

NASA Technical Reports Server (NTRS)

Leeds, M. W.

1978-01-01

The market potential for a portable geothermal wellhead power conversion device is assessed. Major study objectives included identifying the most promising applications for such a system, the potential impediments confronting their industrialization, and the various government actions needed to overcome these impediments. The heart of the study was a series of structured interviews with key decision-making individual in the various disciplines of the geothermal community. In addition, some technical and economic analyses of a candidate system were performed to support the feasibility of the basic concept.

Biology, ecology, and social aspects of wild edible mushrooms in the forests of the Pacific northwest: A preface to managing commercial harvest. Forest Service general technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Molina, R.; O'Dell, T.; Luoma, D.

1993-02-01

The commercial harvest of edible, forest fungi has a multimillion dollar industry with several thousand tons harvested annually. The primary objectives of the overview paper are to provide information on the biology of forest fungi, describe the major edible fungi harvested in the Pacific Northwest, integrate a perspective on the social aspects of the mushroom harvest issue, summarize the development of the commercial mushroom industry, and suggest research and monitoring protocols for developing management guidelines.

Commission 5: Documentation and Astronomical Data

NASA Astrophysics Data System (ADS)

Ohishi, Masatoshi; Hanisch, Robert J.; Norris, Ray P.; Andernach, Heinz; Bishop, Marsha; Griffin, Elizabeth; Kembhavi, Ajit; Murphy, Tara; Pasian, Fabio

2012-04-01

IAU Commission 5 (http://www.nao.ac.jp/IAU/Com5/) deals with data management issues, and its working groups and task group deal specifically with information handling, with data centers and networks, with technical aspects of collection, archiving, storage and dissemination of data, with designations and classification of astronomical objects, with library services, editorial policies, computer communications, ad hoc methodologies, and with various standards, reference frames, etc. FITS (Flexible Image Transport System), the major data exchange format in astronomy, has been standardized, maintained and updated by the FITS working group under Commission 5.

AC power system breadboard

NASA Technical Reports Server (NTRS)

Wappes, Loran J.; Sundberg, R.; Mildice, J.; Peterson, D.; Hushing, S.

1987-01-01

The object of this program was to design, build, test, and deliver a high-frequency (20-kHz) Power System Breadboard which would electrically approximate a pair of dual redundant power channels of an IOC Space Station. This report describes that program, including the technical background, and discusses the results, showing that the major assumptions about the characteristics of this class of hardware (size, mass, efficiency, control, etc.) were substantially correct. This testbed equipment has been completed and delivered to LeRC, where it is operating as a part of the Space Station Power System Test Facility.

Inventory of greenhouse gas emissions from on-road vehicles in Midwestern USA States and integrated approach to achieving environmental sustainability in transportation : USDOT Region V Regional University Transportation Center final report : technical su

DOT National Transportation Integrated Search

2016-12-29

Two project objectives one technical and one educational- were laid out in this project. The technical objective was to assess current inventory of greenhouse gases (GHG) in the six Midwestern states of the nation and to estimate improvements as ...

Technical communication: Notes toward defining discipline

NASA Technical Reports Server (NTRS)

Rubens, P. M.

1981-01-01

In the field of technical communication, definitions posited in virtually any major text violate every major rule of definitions. The most popular method for defining the field is to state that technical writing is any writing that supports technology or technological activities. There is a need for a nice yardstick for measuring what "technology" is. Some ways in which the field can be defined in a tightly structured empirical way and some implications of technical communication for a humanistic education in a technological age are suggested.

Lawrence Berkeley Laboratory/University of California lighting program overview

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berman, S.

1981-12-01

The objective of the Lighting Program is to assist and work in concert with the lighting community (composed of manufacturers, designers, and users) to achieve a more efficient lighting economy. To implement its objectives, the Lighting Program has been divided into three major categories: technical engineering, buildings applications, and human impacts (impacts on health and vision). The technical program aims to undertake research and development projects that are both long-range and high-risk and which the lighting industry has little interest in pursuing on its own, but from which significant benefits could accrue to both the public and the industry. Themore » building applications program studies the effects that introducing daylighting in commercial buildings has on lighting and cooling electrical energy requirements as well as on peak demand. This program also examines optimization strategies for integrating energy-efficient design, lighting hardware, daylighting, and overall building energy requirements. The impacts program examines relationships between the user and the physical lighting environment, in particular how new energy-efficient technologies relate to human productivity and health. These efforts are interdisciplinary, involving engineering, optometry, and medicine. The program facilities are described and the personnel in the program is identified.« less

Object and event recognition for stroke rehabilitation

NASA Astrophysics Data System (ADS)

Ghali, Ahmed; Cunningham, Andrew S.; Pridmore, Tony P.

2003-06-01

Stroke is a major cause of disability and health care expenditure around the world. Existing stroke rehabilitation methods can be effective but are costly and need to be improved. Even modest improvements in the effectiveness of rehabilitation techniques could produce large benefits in terms of quality of life. The work reported here is part of an ongoing effort to integrate virtual reality and machine vision technologies to produce innovative stroke rehabilitation methods. We describe a combined object recognition and event detection system that provides real time feedback to stroke patients performing everyday kitchen tasks necessary for independent living, e.g. making a cup of coffee. The image plane position of each object, including the patient"s hand, is monitored using histogram-based recognition methods. The relative positions of hand and objects are then reported to a task monitor that compares the patient"s actions against a model of the target task. A prototype system has been constructed and is currently undergoing technical and clinical evaluation.

Flight test and evaluation of Omega navigation in a general aviation aircraft. Volume 1: Technical

NASA Technical Reports Server (NTRS)

Howell, J. D.; Hoffman, W. C.; Hwoschinsky, P. V.; Wischmeyer, C. E.

1975-01-01

A low cost flight research program was conducted to evaluate the performance of differential Omega navigation in a general aviation aircraft. The flight program consisted of two distinct parts corresponding to the two major objectives of the study. The Wallops Flight Program was conducted to obtain Omega signal and phase data in the Wallops Flight Center vicinity to provide preliminary technical information and experience in preparation for a comprehensive NASA/FAA flight test program of an experimental differential Omega system. The Northeast Corridor Flight Program was conducted to examine Omega operational suitability and performance on low altitude area navigation (RNAV) routes for city-center to city-center VTOL commercial operations in the Boston-New York-Washington corridor. The development, execution and conclusions of the flight research program are discribed. The results of the study provide both quantitative and qualitative data on the Omega Navigation System under actual operating conditions.

Asteroid Impacts and Modern Civilization: Can We Prevent a Catastrophe?

NASA Astrophysics Data System (ADS)

Harris, A. W.; Boslough, M.; Chapman, C. R.; Drube, L.; Michel, P.; Harris, A. W.

We are now approaching the level of technical expertise necessary to deflect a near-Earth asteroid (NEA) capable of destroying a large urban area, if not a small country. The current level of activity in the field, including search programs, physical characterization, and international initiatives to assess mitigation strategies, is unprecedented. However, we have only just started to explore the relevant properties of the small end of the NEA population (diameter <300 m), of which the next major impactor is most likely to be a member. The Chelyabinsk event has reminded us that objects as small as 20 m, about which we know very little, impact frequently and are a serious threat to life and property. Political awareness and international response efforts are still at a very primitive stage. For a global guarantee of protection, advances in scientific and technical competence must be matched by improvements in international coordination, as well as preparedness at the political level.

Standardization in software conversion of (ROM) estimating

NASA Technical Reports Server (NTRS)

Roat, G. H.

1984-01-01

Technical problems and their solutions comprise by far the majority of work involved in space simulation engineering. Fixed price contracts with schedule award fees are becoming more and more prevalent. Accurate estimation of these jobs is critical to maintain costs within limits and to predict realistic contract schedule dates. Computerized estimating may hold the answer to these new problems, though up to now computerized estimating has been complex, expensive, and geared to the business world, not to technical people. The objective of this effort was to provide a simple program on a desk top computer capable of providing a Rough Order of Magnitude (ROM) estimate in a short time. This program is not intended to provide a highly detailed breakdown of costs to a customer, but to provide a number which can be used as a rough estimate on short notice. With more debugging and fine tuning, a more detailed estimate can be made.

The awareness and attitudes of students of one indian dental school toward information technology and its use to improve patient care.

PubMed

Jathanna, Vinod R; Jathanna, Ramya V; Jathanna, Roopalekha

2014-01-01

Many obstacles need to be overcome if digital and electronic technologies are to be fully integrated in the operation of dental clinics in some countries. These obstacles may be physical, technical, or psychosocial barriers in the form of perceptions and attitudes related to software incompatibilities, patient privacy, and interference with the patient-practitioner relationship. The objectives of the study are to assess the perceptions of Indian dental students of one school toward the usefulness of digital technologies in improving dental practice; their willingness to use digital and electronic technologies; the perceived obstacles to the use of digital and electronic technologies in dental care setups; and their attitudes toward Internet privacy issues. The study population consisted of 186 final year undergraduate dental students from the A. B. Shetty Memorial institute of Dental Sciences, Rajiv Gandhi University of Health Sciences, Mangalore, India. Survey data were analyzed descriptively . Most students indicated that information technology enhances patient satisfaction, the quality of dental record, diagnosis, treatment planning, and doctor-doctor communication. Cost of equipment and need for technical training were regarded as major obstacles by substantial proportions of respondents. Most dental students at our school feel that the information technology will support their decision making in diagnoses and devising effective treatment plans, which in turn increase patient satisfaction and quality of care. Students also perceived that lack of technical knowledge and the high cost of implementation are major barriers to developing information technology in India.

A Comparison of Robotically Assisted Microsurgery versus Manual Microsurgery in Challenging Situations.

PubMed

Willems, Joost I P; Shin, Alexandra M; Shin, Delaney M; Bishop, Allen T; Shin, Alexander Y

2016-04-01

Microsurgery can be challenging secondary to orientation of the vessels, accessibility, or depth of the wound. Robotically assisted microsurgery reduces tremors and improves visualization and may improve the quality of anastomosis compared with traditional microsurgery. The purpose of this study was to compare robotically assisted microsurgery to traditional microsurgery in technically challenging situations with respect to time of anastomosis, quality of anastomosis, and Objective Structured Assessment of Technical Skills. Two investigators with no prior surgery or microsurgery experience performed 160 anastomoses on artificial microvessels after undergoing standardized traditional and robotically assisted microsurgery courses. Five different exposure groups were created with depths of 0, 10, and 20 cm and sidewall angles of 20 and 30 degrees. A comparison of 80 manual with 80 robotically assisted microsurgery anastomoses in different exposure groups was undertaken. The modified Objective Structured Assessment of Technical Skills scoring system, duration per anastomosis, and a subjective comfort scale were evaluated. In the most difficult exposure, Objective Structured Assessment of Technical Skills scores were similar in both groups (p = 0.98), the duration was higher in the manual group (p = 0.004), and the subjective comfort rating was higher in the robotically assisted microsurgery group (p < 0.001). In the easiest (0-cm depth, flat) exposure, Objective Structured Assessment of Technical Skills scores were higher in the manual group (p = 0.018) and the duration was longer in the robotically assisted microsurgery group (p = 0.008). Manual surgery was superior to robotically assisted microsurgery in technically easy exposures. In difficult exposures (greater depth and lower sidewall angles), however, robotically assisted microsurgery had a shorter surgery time and a higher comfort rating, with Objective Structured Assessment of Technical Skills scores similar to those assessing traditional microsurgery. Therapeutic, V.

MM T for linear resonant cooler. Volume 1. Final report, October 1984-September 1986

DOE Office of Scientific and Technical Information (OSTI.GOV)

Narayan, R.; Silvestro, J.

1988-02-16

The three-fold objectives of this contract were to: (1) enhance the producibility and performance of the prototype cooler design developed in a prior contract, (b) qualify the design to the target specification in the contract (basically the HD1045/UA B2 specification amended for 2,500 hour MTTF and low audible noise), and (c) develop and demonstrate a pilot production facility for the cooler. Technical difficulties and cost growth related to objectives (a) and (b) above precluded accomplishing (c) as part of this contract's activities. Nevertheless, performance within or exceeding all major requirements has been demonstrated, and the company is currently producing themore » cooler for use on a U.S. Air Force airborne IR system.« less

Delivering the EarthScope Transportable Array as a Community Asset

NASA Astrophysics Data System (ADS)

Busby, R. W.; Woodward, R.; Simpson, D. W.; Hafner, K.

2009-12-01

The Transportable Array element of EarthScope/USArray is a culmination of years of coordination and planning for a large science initiative via the NSF MREFC program. US researchers and the IRIS Consortium conceived of the science objectives for a continental scale array and, together with the geodetic (PBO) and fault drilling (SAFOD) communities and NSF, successfully merged these scientific objectives with a compelling scientific and technical proposal, accompanied with the budget and schedule to accomplish it. The Transportable Array is now an efficient and exacting execution of an immense technical challenge that, by many measures, is yielding exciting science return, both expected and unanticipated. The technical facility is first-rate in its implementation, yet responsive to science objectives and discovery, actively engaging the community in discussion and new direction. The project is carried out by a core of dedicated and professional staff , guided and advised through considerable feedback from science users who have unprecedented access to high-quality data. This, in a sense, lets seismologists focus on research, rather than be administrators, drivers, shippers, battery mules, electronic technicians and radio hams. Now that USArray is operational, it is interesting to reflect on whether the TA, as a professionally executed project, could succeed as well if it were an independent endeavor, managed and operated outside of the resources developed and available through IRIS and its core programs. We detail how the support the USArray facility provides improves data accessibility and enhances interdisciplinary science. We suggest that the resources and community leadership provided by the IRIS Consortium, and the commitment to the principle of free and open data access, have been basic underpinnings for the success of the TA. This involvement of community-based, scientific leadership in the development of large facilities should be considered in planning future large Earth science or even basic science endeavors. The Global Seismographic Network provides another example where, with strong scientific leadership, the technical objectives have returned far more than expected results from all manner of application of new techniques to high quality data. Again, the key ingredient may be that the project oversight is driven by scientists with free and open access to data and broad and evolving expectations as to how the facility might be applied towards research objectives. Major projects must clearly follow defined plans and budgets; but, while it is important to have managers to motivate schedules and control costs, the energy, vigor and effort to optimize new measures and discover new applications derive from the insights and enthusiasm of the science community.

7 CFR 1944.401 - Objective.

Code of Federal Regulations, 2011 CFR

2011-01-01

... REGULATIONS (CONTINUED) HOUSING Self-Help Technical Assistance Grants § 1944.401 Objective. This subpart sets... to eligible applicants to finance programs of technical and supervisory assistance for self-help... aid needy very low- and low-income families in carrying out self-help housing efforts in rural areas...

What You Should Get from a Professionally Oriented Master's Degree Program in Technical Communication.

ERIC Educational Resources Information Center

Carliner, Saul

1992-01-01

Cites reasons for pursuing a curriculum in technical communication, lists objectives a program should achieve, and outlines a four-part program that includes theory, professional skills, technical proficiency, and an internship. Lists schools offering programs in technical communication. (SR)

Analytical Components of the Benefits and Costs of the Clean Air Act 1990-2020, the Second Prospective Study

EPA Pesticide Factsheets

The major analytical components of the Second Prospective Study are shown on this page. For other major components of the study, supporting technical reports are available which provide additional technical information.

The French Space Operation Act: Technical Regulations

NASA Astrophysics Data System (ADS)

Trinchero, J. P.; Lazare, B.

2010-09-01

The French Space Operation Act(FSOA) stipulates that a prime objective of the National technical regulations is to protect people, property, public health and the environment. Compliance with these technical regulations is mandatory as of 10 December 2010 for space operations by French space operators and for space operations from French territory. The space safety requirements and regulations governing procedures are based on national and international best practices and experience. A critical design review of the space system and procedures shall be carried out by the applicant, in order to verify compliance with the Technical Regulations. An independent technical assessment of the operation is delegated to CNES. The principles applied when drafting technical regulations are as follows: requirements must as far as possible establish the rules according to the objective to be obtained, rather than how it is to be achieved; requirements must give preference to international standards recognised as being the state of the art; requirements must take previous experience into account. Technical regulations are divided into three sections covering common requirements for the launch, control and return of a space object. A dedicated section will cover specific rules to be applied at the Guiana Space Centre. The main topics addressed by the technical regulations are: operator safety management system; study of risks to people, property, public health and the Earth’s environment; impact study on the outer space environment: space debris generated by the operation; planetary protection.

Architectural Drafting: Commercial Applications. Teacher Guide.

ERIC Educational Resources Information Center

Whitney, Terry A.

This curriculum guide contains the technical information and tasks necessary for a student (who has already completed basic drafting) to be employed as an architectural drafter trainee. The curriculum is written in terms of student performance using measurable objectives, technical information, tasks developed to accomplish those objectives, and…

The Author’s Guide to Writing Air Force Flight Test Center Technical Reports

DTIC Science & Technology

2009-08-01

or designated technical expert 2. Author(s): you and anyone also listed as an author 3. Author’s lead at the test organization 4. An operator...it was designed to do, not what it actually did (it should not sound like results). 4. Objectives: State the general objective(s). Do not list the...met or could not meet design objectives and whether or not it was cleared for operational release, as applicable. Do not provide recommendations

Abandoning wells working group

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The primary objective of this working group is to identify major technical, regulatory, and environmental issues that are relevant to the abandonment of offshore wellbores. Once the issues have been identified, the working group also has the objective of making recommendations or providing potential solutions for consideration. Areas for process improvement will be identified and {open_quotes}best practices{close_quotes} will be discussed and compared to {open_quotes}minimum standards.{close_quotes} The working group will primarily focus on wellbore abandonment in the Gulf of Mexico. However, workshop participants are encouraged to discuss international issues which may be relevant to wellbore abandonment practices in the Gulf ofmore » Mexico. The Abandoning Wells Group has identified several major areas for discussion that have concerns related to both operators and service companies performing wellbore abandonments in the Gulf of Mexico. The following broad topics were selected for the agenda: (1) MMS minimum requirements and state regulations. (2) Co-existence of best practices, new technology, and P & A economics. (3) Liability and environmental issues relating to wellbore abandonment.« less

Virtual expansion of the technical vision system for smart vehicles based on multi-agent cooperation model

NASA Astrophysics Data System (ADS)

Krapukhina, Nina; Senchenko, Roman; Kamenov, Nikolay

2017-12-01

Road safety and driving in dense traffic flows poses some challenges in receiving information about surrounding moving object, some of which can be in the vehicle's blind spot. This work suggests an approach to virtual monitoring of the objects in a current road scene via a system with a multitude of cooperating smart vehicles exchanging information. It also describes the intellectual agent model, and provides methods and algorithms of identifying and evaluating various characteristics of moving objects in video flow. Authors also suggest ways for integrating the information from the technical vision system into the model with further expansion of virtual monitoring for the system's objects. Implementation of this approach can help to expand the virtual field of view for a technical vision system.

Radio Meteors Observations Techniques at RI NAO

NASA Astrophysics Data System (ADS)

Vovk, Vasyl; Kaliuzhnyi, Mykola

2016-07-01

The Solar system is inhabited with large number of celestial bodies. Some of them are well studied, such as planets and vast majority of big asteroids and comets. There is one group of objects which has received little attention. That is meteoroids with related to them meteors. Nowadays enough low-technology high-efficiency radio-technical solutions are appeared which allow to observe meteors daily. At RI NAO three methodologies for meteor observation are developed: single-station method using FM-receiver, correlation method using FM-receiver and Internet resources, and single-station method using low-cost SDR-receiver.

NASA/LaRC jet plume research

NASA Technical Reports Server (NTRS)

Seiner, John M.; Ponton, Michael K.; Manning, James C.

1992-01-01

The following provides a summary for research being conducted by NASA/LaRC and its contractors and grantees to develop jet engine noise suppression technology under the NASA High Speed Research (HSR) program for the High Speed Civil Transport (HSCT). The objective of this effort is to explore new innovative concepts for reducing noise to Federally mandated guidelines with minimum compromise on engine performance both in take-off and cruise. The research program is divided into four major technical areas: (1) jet noise research on advanced nozzles; (2) plume prediction and validation; (3) passive and active control; and (4) methodology for noise prediction.

A Government/Industry Summary of the Design Analysis Methods for Vibrations (DAMVIBS) Program

NASA Technical Reports Server (NTRS)

Kvaternik, Raymond G. (Compiler)

1993-01-01

The NASA Langley Research Center in 1984 initiated a rotorcraft structural dynamics program, designated DAMVIBS (Design Analysis Methods for VIBrationS), with the objective of establishing the technology base needed by the rotorcraft industry for developing an advanced finite-element-based dynamics design analysis capability for vibrations. An assessment of the program showed that the DAMVIBS Program has resulted in notable technical achievements and major changes in industrial design practice, all of which have significantly advanced the industry's capability to use and rely on finite-element-based dynamics analyses during the design process.

The Method of Immersion the Problem of Comparing Technical Objects in an Expert Shell in the Class of Artificial Intelligence Algorithms

NASA Astrophysics Data System (ADS)

Sergey Vasilievich, Buharin; Aleksandr Vladimirovich, Melnikov; Svetlana Nikolaevna, Chernyaeva; Lyudmila Anatolievna, Korobova

2017-08-01

The method of dip of the underlying computational problem of comparing technical object in an expert shell in the class of data mining methods is examined. An example of using the proposed method is given.

Taxonomy of Behavioral Objectives for Vocational Programs. Vol. I.

ERIC Educational Resources Information Center

Gloucester County Vocational-Technical School, Sewell, NJ.

Developed from courses of study in two-year vocational technical programs at the Gloucester County Vocational Technical School, these taxonomies present behavioral objectives for 12 subjects. They are intended for use by vocational teachers in the preparation of the vocational component of the individualized educational plan (IEP) for special…

Women in Technical Education. Annual Report 1990-91.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

First-year activities of Women in Technical Education, a project to develop a model for women in that field, were evaluated. A formative evaluation showed that intense development and implementation activity enabled achievement of first-year goals and objectives during the 1990-91 year. Procedures to accomplish objectives were effective.…

DOE scientific and technical information management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beasly, M.

The objective of this paper was a discussion of the mission objectives and program activities of the DOE Office of Scientific and Technical Information. Topics of discussion were: (1) program direction and structure; (2) representation in gov`t and international organizations; (3) management of information; and (4) consultation and assistance.

48 CFR 927.402-1 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

... PATENTS, DATA, AND COPYRIGHTS Technical Data and Copyrights 927.402-1 General. (a) The provisions herein... technical data. The satisfaction of these needs and the achievement of DOE's objectives through a sound data... delivery of technical data and rights in technical data. The legal rights which the Government acquires in...

Invention and Writing in Technical Work: Representing the Object.

ERIC Educational Resources Information Center

Winsor, Dorothy A.

1994-01-01

Describes the way invention is relevant to the practice of technical writing. Studies three engineering students engaged in a real-world project. Shows how the students' technical work and invention for the final report were simultaneous activities. Claims that invention for and through writing overlaps with technical invention. (HB)

An analysis of the technical status of high level radioactive waste and spent fuel management systems

NASA Technical Reports Server (NTRS)

English, T.; Miller, C.; Bullard, E.; Campbell, R.; Chockie, A.; Divita, E.; Douthitt, C.; Edelson, E.; Lees, L.

1977-01-01

The technical status of the old U.S. mailine program for high level radioactive nuclear waste management, and the newly-developing program for disposal of unreprocessed spent fuel was assessed. The method of long term containment for both of these waste forms is considered to be deep geologic isolation in bedded salt. Each major component of both waste management systems is analyzed in terms of its scientific feasibility, technical achievability and engineering achievability. The resulting matrix leads to a systematic identification of major unresolved technical or scientific questions and/or gaps in these programs.

Proceedings of the magnetic fusion energy blanket and shield workshop. A technical assessment. Volume I

DOE Office of Scientific and Technical Information (OSTI.GOV)

Powell, J.R.; Fillo, J.A.; Twining, B.G.

1975-08-01

The first volume of these Proceedings is devoted to summarizing the results of the activities of the five technical area Study Groups. These Study Groups played a major role in the Workshop since it was their mission to identify key research and development requirements in their technical areas, etimate the prospects for success of research and development projects directed toward fulfilling these requirements, and determine appropriate time scales for the initiation and completion of these efforts. The determination of which new scientific and technological knowledge, data, and techniques will be required to achieve the Division of Magnetic Fusion Energy programmore » goals, and the construction of an evaluated compilation of research and development needs along with suggestions for levels of effort needed to achieve these goals were among the objectives of the Study Groups. The Conclusions and Recommendations of the Study Groups are summaries of the individual Study Group's findings prepared by the chairmen and co-chairmen/secretaries. These findings were presented to all the Workshop participants in a plenary session, and the discussion and comments on the findings are included in this volume.« less

Decision making in urological surgery.

PubMed

Abboudi, Hamid; Ahmed, Kamran; Normahani, Pasha; Abboudi, May; Kirby, Roger; Challacombe, Ben; Khan, Mohammed Shamim; Dasgupta, Prokar

2012-06-01

Non-technical skills are important behavioural aspects that a urologist must be fully competent at to minimise harm to patients. The majority of surgical errors are now known to be due to errors in judgment and decision making as opposed to the technical aspects of the craft. The authors reviewed the published literature regarding decision-making theory and in practice related to urology as well as the current tools available to assess decision-making skills. Limitations include limited number of studies, and the available studies are of low quality. Decision making is the psychological process of choosing between alternative courses of action. In the surgical environment, this can often be a complex balance of benefit and risk within a variable time frame and dynamic setting. In recent years, the emphasis of new surgical curriculums has shifted towards non-technical surgical skills; however, the assessment tools in place are far from objective, reliable and valid. Surgical simulators and video-assisted questionnaires are useful methods for appraisal of trainees. Well-designed, robust and validated tools need to be implemented in training and assessment of decision-making skills in urology. Patient safety can only be ensured when safe and effective decisions are made.

Technical Skills Training for Veterinary Students: A Comparison of Simulators and Video for Teaching Standardized Cardiac Dissection.

PubMed

Allavena, Rachel E; Schaffer-White, Andrea B; Long, Hanna; Alawneh, John I

The goal of the study was to evaluate alternative student-centered approaches that could replace autopsy sessions and live demonstration and to explore refinements in assessment procedures for standardized cardiac dissection. Simulators and videos were identified as feasible, economical, student-centered teaching methods for technical skills training in medical contexts, and a direct comparison was undertaken. A low-fidelity anatomically correct simulator approximately the size of a horse's heart with embedded dissection pathways was constructed and used with a series of laminated photographs of standardized cardiac dissection. A video of a standardized cardiac dissection of a normal horse's heart was recorded and presented with audio commentary. Students were allowed to nominate a preference for learning method, and students who indicated no preference were randomly allocated to keep group numbers even. Objective performance data from an objective structure assessment criterion and student perception data on confidence and competency from surveys showed both innovations were similarly effective. Evaluator reflections as well as usage logs to track patterns of student use were both recorded. A strong selection preference was identified for kinesthetic learners choosing the simulator and visual learners choosing the video. Students in the video cohort were better at articulating the reasons for dissection procedures and sequence due to the audio commentary, and student satisfaction was higher with the video. The major conclusion of this study was that both methods are effective tools for technical skills training, but consideration should be given to the preferred learning style of adult learners to maximize educational outcomes.

Integrated modeling tool for performance engineering of complex computer systems

NASA Technical Reports Server (NTRS)

Wright, Gary; Ball, Duane; Hoyt, Susan; Steele, Oscar

1989-01-01

This report summarizes Advanced System Technologies' accomplishments on the Phase 2 SBIR contract NAS7-995. The technical objectives of the report are: (1) to develop an evaluation version of a graphical, integrated modeling language according to the specification resulting from the Phase 2 research; and (2) to determine the degree to which the language meets its objectives by evaluating ease of use, utility of two sets of performance predictions, and the power of the language constructs. The technical approach followed to meet these objectives was to design, develop, and test an evaluation prototype of a graphical, performance prediction tool. The utility of the prototype was then evaluated by applying it to a variety of test cases found in the literature and in AST case histories. Numerous models were constructed and successfully tested. The major conclusion of this Phase 2 SBIR research and development effort is that complex, real-time computer systems can be specified in a non-procedural manner using combinations of icons, windows, menus, and dialogs. Such a specification technique provides an interface that system designers and architects find natural and easy to use. In addition, PEDESTAL's multiview approach provides system engineers with the capability to perform the trade-offs necessary to produce a design that meets timing performance requirements. Sample system designs analyzed during the development effort showed that models could be constructed in a fraction of the time required by non-visual system design capture tools.

Technical factors associated with anastomotic leak after Roux-en-Y gastric bypass.

PubMed

Smith, Mark D; Adeniji, Abidemi; Wahed, Abdus S; Patterson, Emma; Chapman, William; Courcoulas, Anita P; Dakin, Gregory; Flum, David; McCloskey, Carol; Mitchell, James E; Pomp, Alfons; Staten, Myrlene; Wolfe, Bruce

2015-01-01

Anastomotic leak is one of the most serious complications after Roux-en-Y gastric bypass (RYGB). Our objective was to examine the relationship between technical factors and incidence of clinically relevant anastomotic leak after RYGB in longitudinal assessment of bariatric surgery (LABS). The setting of the study was 11 bariatric centers in the United States, university, and private practice. Patient characteristics, technical factors of surgery, and postoperative outcomes were assessed by trained researchers using standardized protocols. Correlation of surgical factors of patients undergoing RYGB (n = 4444) with the incidence of postoperative anastomotic leak was assessed by univariate χ(2) analysis. Forty-four participants (1.0%, 95% CI .7%-1.3%) experienced a clinically relevant anastomotic leak. Of these, 39 (89%) underwent abdominal reoperation and 3 (7%) died. Technical factors associated with anastomotic leak were open surgery (P<.0001), revision surgery (P<.0001), and use of an abdominal drain (P = .02). Provocative leak testing, method of gastrojejunostomy, and use of fibrin sealant were not associated with anastomotic leak. Anastomotic leak after RYGB was rare (1.0%). Most cases required reintervention; however, the majority (93%) recovered from this event. Open surgery, revision surgery, and routine drain placement were associated with increased leak rate. Some of these findings may be due to differences in preoperative patient risk. Copyright © 2015 American Society for Metabolic and Bariatric Surgery. All rights reserved.

Technical Communications in Aeronautics: Results of an Exploratory Study. NASA Technical Memorandum 101534, Parts 1 and 2.

ERIC Educational Resources Information Center

Pinelli, Thomas E.; And Others

An exploratory study investigated technical communications in aeronautics by surveying aeronautical engineers and scientists. The study had five specific objectives: to solicit the opinions of aeronautical engineers and scientists regarding the importance of technical communications to their profession; to determine their use and production of…

48 CFR 1515.404-471 - EPA structured approach for developing profit or fee objectives.

Code of Federal Regulations, 2011 CFR

2011-10-01

... profit or fee objective. (5) The weight factors discussed in this section are designed for arriving at... involving creative design. (B) Consideration should be given to the managerial and technical efforts.../technical and general labor. Analysis of labor should include evaluation of the comparative quality and...

48 CFR 1515.404-471 - EPA structured approach for developing profit or fee objectives.

Code of Federal Regulations, 2013 CFR

2013-10-01

... profit or fee objective. (5) The weight factors discussed in this section are designed for arriving at... involving creative design. (B) Consideration should be given to the managerial and technical efforts.../technical and general labor. Analysis of labor should include evaluation of the comparative quality and...

48 CFR 1515.404-471 - EPA structured approach for developing profit or fee objectives.

Code of Federal Regulations, 2012 CFR

2012-10-01

... profit or fee objective. (5) The weight factors discussed in this section are designed for arriving at... involving creative design. (B) Consideration should be given to the managerial and technical efforts.../technical and general labor. Analysis of labor should include evaluation of the comparative quality and...

48 CFR 1515.404-471 - EPA structured approach for developing profit or fee objectives.

Code of Federal Regulations, 2014 CFR

2014-10-01

... profit or fee objective. (5) The weight factors discussed in this section are designed for arriving at... involving creative design. (B) Consideration should be given to the managerial and technical efforts.../technical and general labor. Analysis of labor should include evaluation of the comparative quality and...

48 CFR 1515.404-471 - EPA structured approach for developing profit or fee objectives.

Code of Federal Regulations, 2010 CFR

2010-10-01

... profit or fee objective. (5) The weight factors discussed in this section are designed for arriving at... involving creative design. (B) Consideration should be given to the managerial and technical efforts.../technical and general labor. Analysis of labor should include evaluation of the comparative quality and...

Strategic Planning in a Government Organization: The Experience of the Technical Information Division at NRaD.

ERIC Educational Resources Information Center

Cathcart, Margaret E.

1997-01-01

Describes development of strategic objectives at the Research, Development, Test, and Evaluation Division of the Naval Command, Control and Ocean Surveillance Center (NRaD). Discusses its plan to achieve these objectives. States that the organization's responsibilities span the continuum of information using technical communication skills. Uses…

An Object-Oriented Architecture for Intelligent Tutoring Systems. Technical Report No. LSP-3.

ERIC Educational Resources Information Center

Bonar, Jeffrey; And Others

This technical report describes a generic architecture for building intelligent tutoring systems which is developed around objects that represent the knowledge elements to be taught by the tutor. Each of these knowledge elements, called "bites," inherits both a knowledge organization describing the kind of knowledge represented and…

1988 Underground Storage Tanks; Technical Requirements; Final Rule and Underground Storage Tanks Containing Petroleum-Financial Responsibility Requirements and State Program Approval Objective; Final Rule

EPA Pesticide Factsheets

EPA's 1988 regulations concerning USTs are contained in 40 CFR Part 280, 40 CFR Part 281 and 40 CFR Parts 282.50-282.105 and divided into three sections: technical requirements, financial responsibility requirements, and state program approval objectives.

Simulation fails to replicate stress in trainees performing a technical procedure in the clinical environment.

PubMed

Baker, B G; Bhalla, A; Doleman, B; Yarnold, E; Simons, S; Lund, J N; Williams, J P

2017-01-01

Simulation-based training (SBT) has become an increasingly important method by which doctors learn. Stress has an impact upon learning, performance, technical, and non-technical skills. However, there are currently no studies that compare stress in the clinical and simulated environment. We aimed to compare objective (heart rate variability, HRV) and subjective (state trait anxiety inventory, STAI) measures of stress theatre with a simulated environment. HRV recordings were obtained from eight anesthetic trainees performing an uncomplicated rapid sequence induction at pre-determined procedural steps using a wireless Polar RS800CX monitor © in an emergency theatre setting. This was repeated in the simulated environment. Participants completed an STAI before and after the procedure. Eight trainees completed the study. The theatre environment caused an increase in objective stress vs baseline (p = .004). There was no significant difference between average objective stress levels across all time points (p = .20) between environments. However, there was a significant interaction between the variables of objective stress and environment (p = .045). There was no significant difference in subjective stress (p = .27) between environments. Simulation was unable to accurately replicate the stress of the technical procedure. This is the first study that compares the stress during SBT with the theatre environment and has implications for the assessment of simulated environments for use in examinations, rating of technical and non-technical skills, and stress management training.

Technical Assistance and Changes in Nutrition and Physical Activity Practices in the National Early Care and Education Learning Collaboratives Project, 2015–2016

PubMed Central

Smith, Teresa M.; Estabrooks, Paul A.; Rasmussen, Cristy Geno; Blaser, Casey; Yaroch, Amy L

2018-01-01

Purpose and Objectives The National Early Care and Education Learning Collaboratives Project (ECELC) aims to improve best practices in early care and education (ECE) programs in topic areas of the Nutrition and Physical Activity Self-Assessment in Child Care (NAP SACC). Technical assistance is a component of the ECELC, yet its effect on outcomes is unclear. Beyond dose and duration of technical assistance, limited research exists on characteristics of technical assistance that contribute to outcomes. The objective of this study was to identify and describe technical assistance characteristics and explore associations with NAP SACC outcomes. Intervention Approach We collected data from 10 collaboratives comprising 84 ECE programs in 2 states in 2015–2016. The objective of technical assistance was to support programs in improving best practices. Technical assistance was provided to programs via on-site, telephone, or email and was tailored to program needs. Evaluation Methods We used a mixed-methods design to examine associations between technical assistance and NAP SACC outcomes. We used multiple regression analysis to assess quantitative data and qualitative comparative analysis to determine necessary and sufficient technical assistance conditions supporting NAP SACC outcomes. We also conducted a document review to describe technical assistance that referred conditions identified by the qualitative comparative analysis. Results Regression analyses detected an inverse relationship between changes in NAP SACC scores and hours of technical assistance. No clear pattern emerged in the qualitative comparative analysis, leaving no necessary and sufficient conditions. However, the qualitative comparative analysis identified feedback as a potentially important component of technical assistance, whereas resource sharing and frequent email were characteristics that seemed to reduce the likelihood of improved outcomes. Email and resource sharing were considered primarily general information rather than tailored technical assistance. Implications for Public Health Technical assistance may be used in programs and made adaptable to program needs. The inclusion and evaluation of technical assistance, especially tailored approaches, is warranted for environmental interventions, including ECE settings. PMID:29704371

Coal gasification systems engineering and analysis. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1980-01-01

Feasibility analyses and systems engineering studies for a 20,000 tons per day medium Btu (MBG) coal gasification plant to be built by TVA in Northern Alabama were conducted. Major objectives were as follows: (1) provide design and cost data to support the selection of a gasifier technology and other major plant design parameters, (2) provide design and cost data to support alternate product evaluation, (3) prepare a technology development plan to address areas of high technical risk, and (4) develop schedules, PERT charts, and a work breakdown structure to aid in preliminary project planning. Volume one contains a summary of gasification system characterizations. Five gasification technologies were selected for evaluation: Koppers-Totzek, Texaco, Lurgi Dry Ash, Slagging Lurgi, and Babcock and Wilcox. A summary of the trade studies and cost sensitivity analysis is included.

Toward an objective assessment of technical skills: a national survey of surgical program directors in Saudi Arabia.

PubMed

Alkhayal, Abdullah; Aldhukair, Shahla; Alselaim, Nahar; Aldekhayel, Salah; Alhabdan, Sultan; Altaweel, Waleed; Magzoub, Mohi Elden; Zamakhshary, Mohammed

2012-01-01

After almost a decade of implementing competency-based programs in postgraduate training programs, the assessment of technical skills remains more subjective than objective. National data on the assessment of technical skills during surgical training are lacking. We conducted this study to document the assessment tools for technical skills currently used in different surgical specialties, their relationship with remediation, the recommended tools from the program directors' perspective, and program directors' attitudes toward the available objective tools to assess technical skills. This study was a cross-sectional survey of surgical program directors (PDs). The survey was initially developed using a focus group and was then sent to 116 PDs. The survey contains demographic information about the program, the objective assessment tools used, and the reason for not using assessment tools. The last section discusses the recommended tools to be used from the PDs' perspective and the PDs' attitude and motivation to apply these tools in each program. The associations between the responses to the assessment questions and remediation were statistically evaluated. Seventy-one (61%) participants responded. Of the respondents, 59% mentioned using only nonstandardized, subjective, direct observation for technical skills assessment. Sixty percent use only summative evaluation, whereas 15% perform only formative evaluations of their residents, and the remaining 22% conduct both summative and formative evaluations of their residents' technical skills. Operative portfolios are kept by 53% of programs. The percentage of programs with mechanisms for remediation is 29% (19 of 65). The survey showed that surgical training programs use different tools to assess surgical skills competency. Having a clear remediation mechanism was highly associated with reporting remediation, which reflects the capability to detect struggling residents. Surgical training leadership should invest more in standardizing the assessment of surgical skills.

A Procedural Skills OSCE: Assessing Technical and Non-Technical Skills of Internal Medicine Residents

ERIC Educational Resources Information Center

Pugh, Debra; Hamstra, Stanley J.; Wood, Timothy J.; Humphrey-Murto, Susan; Touchie, Claire; Yudkowsky, Rachel; Bordage, Georges

2015-01-01

Internists are required to perform a number of procedures that require mastery of technical and non-technical skills, however, formal assessment of these skills is often lacking. The purpose of this study was to develop, implement, and gather validity evidence for a procedural skills objective structured clinical examination (PS-OSCE) for internal…

[Experience of the development special medical technical laboratory for studies of effects caused by potent electromagnetic radiation in biologic objects].

PubMed

Gorodetsky, B N; Kalyada, T V; Petrov, S V

2015-01-01

This article covers topics of creating special medical technical laboratory for medial and biologic studies concerning influence of potent high-frequency elecromagnetic radiation on various biologic objects. The authors gave example of such laboratory, described its construction features, purpose and main characteristics of the included devices.

Fiscal Year 1986 Technical Objective Document (TOD).

DTIC Science & Technology

1986-03-01

abilties superior to other IR and manual turrets. - START DATE: FY 88 END DATE: FY 90" PROJECT TITLE: COMPOSITE METAL FIRES EE 62:06 JON: 2673XXXX...TECHNOLOGY: FIRE ELEMENT: INTERACTION DESCRIPTION (TECHNICAL OBJECTIVE) Evaluate a new series of agents "BORALONS" capable of extinguishing metal fires and...PROJECT TITLE: COMPOSITE METAL FIRES PE: 63723 JON: 2104XXXX

Social Embodiment of Technical Devices: Eyeglasses over the Centuries and According to Their Uses

ERIC Educational Resources Information Center

Veyrat, Nicolas; Blanco, Eric; Trompette, Pascale

2008-01-01

This article is an attempt to prepare the ground for the analysis and theorization of the connection between the body and technical devices emerging from miniaturized wearable technologies. The research object is a secular and common "body object," namely, eyeglasses. The article reviews the social history of this artifact and analyzes its…

Tank characterization report for single-shell tank 241-C-109

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simpson, B.C.

1997-05-23

One of the major functions of the Tank Waste Remediation System (TWRS) is to characterize wastes in support of waste management and disposal activities at the Hanford Site. Analytical data from sampling and analysis, along with other available information about a tank, are compiled and maintained in a tank characterization report (TCR). This report and its appendices serve as the TCR for single-shell tank 241-C-109. The objectives of this report are: (1) to use characterization data in response to technical issues associated with tank 241 C-109 waste; and (2) to provide a standard characterization of this waste in terms ofmore » a best-basis inventory estimate. The response to technical issues is summarized in Section 2.0, and the best-basis inventory estimate is presented in Section 3.0. Recommendations regarding safety status and additional sampling needs are provided in Section 4.0. Supporting data and information are contained in the appendices.« less

48 CFR 2052.215-75 - Proposal presentation and format.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., i.e., competitive vs. noncompetitive, and the cost evaluation. (c) “Written Technical and Management... * copies. (1) The written Technical and Management Proposal or Oral Presentation and Supporting... objectives of this procurement. (3) The written Technical Proposal or Oral Presentation and Supporting...

Introducing Development Education in Technical Universities: Successful Experiences in Spain

ERIC Educational Resources Information Center

Boni, A.; Perez-Foguet, A.

2008-01-01

This paper presents and analyses the main characteristics of successful experiences of Development Education (DE) introduced in two major Spanish Technical Universities (Technical University of Catalonia, TUC, and Technical University of Valencia, TUV) during the nineties and the beginning of the twenty-first century. In this paper, after a brief…

An Interdisciplinary Program in Technical Communications: Problems Encountered.

ERIC Educational Resources Information Center

Eckman, Martha

The need for experts in technical communication is growing significantly while the number of college graduates in the field accounts for less than one percent of the need. Three major types of problems should be considered in trying to establish a technical communication program: those involving society's need for better technical communicators,…

LANDFILL GAS ENERGY UTILIZATION EXPERIENCE: DISCUSSION OF TECHNICAL AND NON-TECHNICAL ISSUES, SOLUTIONS, AND TRENDS

EPA Science Inventory

The report discusses technical and non-technical considerations associated with the development and operation of landfill gas to energy projects. Much of the report is based on interviews and site visits with the major developers and operators of the more than 110 projects in the...

Systems and technologies for objective evaluation of technical skills in laparoscopic surgery.

PubMed

Sánchez-Margallo, Juan A; Sánchez-Margallo, Francisco M; Oropesa, Ignacio; Gómez, Enrique J

2014-01-01

Minimally invasive surgery is a highly demanding surgical approach regarding technical requirements for the surgeon, who must be trained in order to perform a safe surgical intervention. Traditional surgical education in minimally invasive surgery is commonly based on subjective criteria to quantify and evaluate surgical abilities, which could be potentially unsafe for the patient. Authors, surgeons and associations are increasingly demanding the development of more objective assessment tools that can accredit surgeons as technically competent. This paper describes the state of the art in objective assessment methods of surgical skills. It gives an overview on assessment systems based on structured checklists and rating scales, surgical simulators, and instrument motion analysis. As a future work, an objective and automatic assessment method of surgical skills should be standardized as a means towards proficiency-based curricula for training in laparoscopic surgery and its certification.

Laser geodynamic satellite thermal/optical/ vibrational analyses and testing. Volume 2: Technical report, book 1. [retroreflector design

NASA Technical Reports Server (NTRS)

1974-01-01

The results of the LAGEOS thermal/optical/vibrational analysis and test program are reported. Through analyses and tests it is verified that the MSFC LAGEOS design provides a retroreflector thermal environment which maintains acceptable retroflector internal thermal gradients. The technical results of the study, organized by the major task areas are presented. The interrelationships of the major tasks are described and the major decisions are identified.

Access Barriers to Distance Education Perceived by Inservice and Preservice Career and Technical Education Majors.

ERIC Educational Resources Information Center

Zirkle, Chris

The access barriers to distance education faced by inservice and preservice career and technical education (CTE) majors were examined through a survey of 76 students enrolled in undergraduate- and graduate-level CTE education programs. Completed questionnaires were received from 60 students (response rate, 78.9%). Forty respondents worked…

Vocational-Technical Education; A Prospectus for Change.

ERIC Educational Resources Information Center

Schaefer, Carl J., Ed.; Kaufman, Jacob J., Ed.

To seek resolution of problems in providing education for youth and adults oriented toward the world of work, the Massachusetts Advisory Council on Education (MACE) undertook a study of vocational-technical education as a major project. This publication contains the major papers and prepared reactions to these papers, which were presented at a…

Computational Design Tool for the Synthesis and Optimization of Gel Formulations (SOGeF)

DTIC Science & Technology

2009-01-01

ACCOMPLISHMENTS 2.1 Phase I Technical Objectives TIle primary technical objective of the Phase I program was the development of a model(s) to describe the...Figure 37: Storage Modulus G’, Loss Modulus G", and Stress vs. Strain. Yield Stress ~460Pa. (Tri-ethylamine 11% Cabosil) The primary detenninant of...GUI The primary objective of this task was to design and implement a graphical user interface (GUI) for the NN algorithms and gel database files. The

Synthetic biology and the technicity of biofuels.

PubMed

Mackenzie, Adrian

2013-06-01

The principal existing real-world application of synthetic biology is biofuels. Several 'next generation biofuel' companies-Synthetic Genomics, Amyris and Joule Unlimited Technologies-claim to be using synthetic biology to make biofuels. The irony of this is that highly advanced science and engineering serves the very mundane and familiar realm of transport. Despite their rather prosaic nature, biofuels could offer an interesting way to highlight the novelty of synthetic biology from several angles at once. Drawing on the French philosopher of technology and biology Gilbert Simondon, we can understand biofuels as technical objects whose genesis involves processes of concretisation that negotiate between heterogeneous geographical, biological, technical, scientific and commercial realities. Simondon's notion of technicity, the degree of concretisation of a technical object, usefully conceptualises this relationality. Viewed in terms of technicity, we might understand better how technical entities, elements, and ensembles are coming into being in the name of synthetic biology. The broader argument here is that when we seek to identify the newness of disciplines, their newness might be less epistemic and more logistic. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

The Role of the Technical Specialist in Disaster Response and Recovery

NASA Astrophysics Data System (ADS)

Curtis, J. C.

2017-12-01

Technical Specialists provide scientific expertise for making operational decisions during natural hazards emergencies. Technical Specialists are important members of any Incident Management Team (IMT) as is described in in the National Incident Management System (NIMS) that has been designed to respond to emergencies. Safety for the responders and the threatened population is the foremost consideration in command decisions and objectives, and the Technical Specialist is on scene and in the command post to support and promote safety while aiding decisions for incident objectives. The Technical Specialist's expertise can also support plans, logistics, and even finance as well as operations. This presentation will provide actual examples of the value of on-scene Technical Specialists, using National Weather Service "Decision Support Meteorologists" and "Incident Meteorologists". These examples will demonstrate the critical role of scientists that are trained in advising and presenting life-critical analysis and forecasts during emergencies. A case will be made for local, state, and/or a national registry of trained and deployment-ready scientists that can support emergency response.

A strategy for Earth science from space in the 1980s. Part 1: Solid earth and oceans

NASA Technical Reports Server (NTRS)

1982-01-01

The report develops a ten-year science strategy for investigating the solid earth and dynamics of world oceans from Earth orbit. The strategy begins from the premise that earth studies have proceeded to the point where further advances in understanding Earth processes must be based on a global perspective and that the U.S. is technically ready to begin a global study approach from Earth orbit. The major areas of study and their fundamental problems are identified. The strategy defines the primary science objectives to be addressed and the essential measurements and precision to achieve them.

Availability Control for Means of Transport in Decisive Semi-Markov Models of Exploitation Process

NASA Astrophysics Data System (ADS)

Migawa, Klaudiusz

2012-12-01

The issues presented in this research paper refer to problems connected with the control process for exploitation implemented in the complex systems of exploitation for technical objects. The article presents the description of the method concerning the control availability for technical objects (means of transport) on the basis of the mathematical model of the exploitation process with the implementation of the decisive processes by semi-Markov. The presented method means focused on the preparing the decisive for the exploitation process for technical objects (semi-Markov model) and after that specifying the best control strategy (optimal strategy) from among possible decisive variants in accordance with the approved criterion (criteria) of the activity evaluation of the system of exploitation for technical objects. In the presented method specifying the optimal strategy for control availability in the technical objects means a choice of a sequence of control decisions made in individual states of modelled exploitation process for which the function being a criterion of evaluation reaches the extreme value. In order to choose the optimal control strategy the implementation of the genetic algorithm was chosen. The opinions were presented on the example of the exploitation process of the means of transport implemented in the real system of the bus municipal transport. The model of the exploitation process for the means of transports was prepared on the basis of the results implemented in the real transport system. The mathematical model of the exploitation process was built taking into consideration the fact that the model of the process constitutes the homogenous semi-Markov process.

Application of objective clinical human reliability analysis (OCHRA) in assessment of technical performance in laparoscopic rectal cancer surgery.

PubMed

Foster, J D; Miskovic, D; Allison, A S; Conti, J A; Ockrim, J; Cooper, E J; Hanna, G B; Francis, N K

2016-06-01

Laparoscopic rectal resection is technically challenging, with outcomes dependent upon technical performance. No robust objective assessment tool exists for laparoscopic rectal resection surgery. This study aimed to investigate the application of the objective clinical human reliability analysis (OCHRA) technique for assessing technical performance of laparoscopic rectal surgery and explore the validity and reliability of this technique. Laparoscopic rectal cancer resection operations were described in the format of a hierarchical task analysis. Potential technical errors were defined. The OCHRA technique was used to identify technical errors enacted in videos of twenty consecutive laparoscopic rectal cancer resection operations from a single site. The procedural task, spatial location, and circumstances of all identified errors were logged. Clinical validity was assessed through correlation with clinical outcomes; reliability was assessed by test-retest. A total of 335 execution errors identified, with a median 15 per operation. More errors were observed during pelvic tasks compared with abdominal tasks (p < 0.001). Within the pelvis, more errors were observed during dissection on the right side than the left (p = 0.03). Test-retest confirmed reliability (r = 0.97, p < 0.001). A significant correlation was observed between error frequency and mesorectal specimen quality (r s = 0.52, p = 0.02) and with blood loss (r s = 0.609, p = 0.004). OCHRA offers a valid and reliable method for evaluating technical performance of laparoscopic rectal surgery.

MAAG Job Position: Rolebooks and Technical Vocabulary (Iberian Spanish). Methods for Determining Language Objectives and Criteria, Volume VII.

ERIC Educational Resources Information Center

Setzler, Hubert H., Jr.; And Others

Rolebooks and technical Iberian Spanish vocabulary for the job position of military advisory and assistance group (MAAG) officer of the Air Force are presented. The materials are part of the communication/language objectives-based system (C/LOBS), which supports the front-end analysis efforts of the Defense Language Institute Foreign Language…

Constructing a Validity Argument for the Objective Structured Assessment of Technical Skills (OSATS): A Systematic Review of Validity Evidence

ERIC Educational Resources Information Center

Hatala, Rose; Cook, David A.; Brydges, Ryan; Hawkins, Richard

2015-01-01

In order to construct and evaluate the validity argument for the Objective Structured Assessment of Technical Skills (OSATS), based on Kane's framework, we conducted a systematic review. We searched MEDLINE, EMBASE, CINAHL, PsycINFO, ERIC, Web of Science, Scopus, and selected reference lists through February 2013. Working in duplicate, we selected…

Learning How (and How Not) to Weld: Vocational Learning in Technical Vocational Education

ERIC Educational Resources Information Center

Asplund, Stig-Börje; Kilbrink, Nina

2018-01-01

This article focuses on vocational learning in technical vocational education in upper-secondary school, with a special focus on the object of learning to weld. A concrete teaching situation where the learning object to weld is the focus of the interaction between a vocational teacher and an upper-secondary student was documented by a video camera…

Evolution of Scientific and Technical Information Distribution

NASA Technical Reports Server (NTRS)

Esler, Sandra; Nelson, Michael L.

1998-01-01

World Wide Web (WWW) and related information technologies are transforming the distribution of scientific and technical information (STI). We examine 11 recent, functioning digital libraries focusing on the distribution of STI publications, including journal articles, conference papers, and technical reports. We introduce 4 main categories of digital library projects: based on the architecture (distributed vs. centralized) and the contributor (traditional publisher vs. authoring individual/organization). Many digital library prototypes merely automate existing publishing practices or focus solely on the digitization of the publishing cycle output, not sampling and capturing elements of the input. Still others do not consider for distribution the large body of "gray literature." We address these deficiencies in the current model of STI exchange by suggesting methods for expanding the scope and target of digital libraries by focusing on a greater source of technical publications and using "buckets," an object-oriented construct for grouping logically related information objects, to include holdings other than technical publications.

Laser Atmospheric Wind Sounder (LAWS) phase 1. Volume 2

NASA Technical Reports Server (NTRS)

1990-01-01

This report summarizes and documents the results of the 12-month phase 1 work effort. The objective of phase 1 was to establish the conceptional definition of the laser atmospheric wind sounder (LAWS) sensor system, including accommodations analyses to ensure compatibility with the Space Station Freedom (SSF) and the Earth Observing System (EOS) Polar Orbiting Platform (POP). Various concepts were investigated with trade studies performed to select the configuration to be carried forward to the phase 2 Preliminary Design Definition. A summary of the LAWS system and subsystem trade studies that were performed leading to the baseline design configuration is presented in the appendix. The overall objective of the LAWS Project is to define, design, and implement an operational space based facility, LAWS, for accurate measurement of Earth wind profiles. Phase 1 addressed three major areas: (1) requirements definition; (2) instrument concepts and configurations; and (3) performance analysis. For the LAWS instrument concepts and configurations, the issues which press the technological state of the art are reliable detector lifetime and laser performance and lifetime. Lag angle compensation, pointing accuracy, satellite navigation, and telescope design are significant technical issues, but they are considered to be currently state of the art. The primary issues for performance analysis concern interaction with the atmosphere in terms of backscatter and attenuation, wind variance, and cloud blockage. The phase 1 tasks were formulated to address these significant technical issues and demonstrate the technical feasibility of the LAWS concept. Primary emphasis was placed on analysis/trade and identification of candidate concepts. Promising configurations were evaluated for performance, sensitivities, risks, and budgetary costs. Lockheed's baseline LAWS configuration is presented.

15 CFR 295.6 - Criteria for selection.

Code of Federal Regulations, 2011 CFR

2011-01-01

... proposal will be funded unless the Program determines that it has scientific and technological merit and... does not have an adequate technical and commercialization plan. (a) Scientific and technological merit... innovation, the technical approach, major technical hurdles, the attendant risks, and clearly establish...

Flywheel energy storage for electromechanical actuation systems

NASA Technical Reports Server (NTRS)

Hockney, Richard L.; Goldie, James H.; Kirtley, James L.

1991-01-01

The authors describe a flywheel energy storage system designed specifically to provide load-leveling for a thrust vector control (TVC) system using electromechanical actuators (EMAs). One of the major advantages of an EMA system over a hydraulic system is the significant reduction in total energy consumed during the launch profile. Realization of this energy reduction will, however, require localized energy storage capable of delivering the peak power required by the EMAs. A combined flywheel-motor/generator unit which interfaces directly to the 20-kHz power bus represents an ideal candidate for this load leveling. The overall objective is the definition of a flywheel energy storage system for this application. The authors discuss progress on four technical objectives: (1) definition of the specifications for the flywheel-motor/generator system, including system-level trade-off analysis; (2) design of the flywheel rotor; (3) design of the motor/generator; and (4) determination of the configuration for the power management system.

Joint Integration Office Independent Review Committee annual report, 1985

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Comprised of seven persons with extensive experience in the issues of nuclear waste, the Independent Review Committee (IRC) provides independent and objective review of Defense Transuranic Waste Program (DTWP) activities managed by the Joint Integration Office (JIO), formerly the Defense Transuranic Waste Lead Organization (TLO). The Committee is ensured a broad, interdisciplinary perspective since its membership includes representatives from the fields of nuclear engineering, nuclear waste transportation, industrial quality control, systems and environmental engineering and state and local government. The scope of IRC activities includes overall review of specific TLO plans, projects and activities, and technical review of particular researchmore » and development projects. The Committee makes specific suggestions and recommendations based upon expertise in the field of TRU Waste Management. The IRC operates as a consulting group, under an independent charter providing objective review of program activities. This report summarizes the 12 major topics reviewed by the committee during 1985.« less

The development of a center cell structure in bonded aluminum for the Ferrari 408 research vehicle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seeds, A.; Nardini, D.; Cassese, F.

1989-01-01

In F408 research vehicle has enabled Ferrari Engineering to evaluate new forms of transmission, suspension, bodywork and structure for future production vehicles. As Alcan worked with Ferrari Engineering to adapt its Aluminum Structured Vehicle Technology (ASVT) to develop a bonded version of a central section of the structure (center cell). This paper begins with an outline of the major F408 project objectives and indicates the performance and manufacturing advantages for the features of interest, particularly the center cell structure. The paper describes the development stages of the bonded aluminum center cell. It shows that the performance and manufacturing objectives weremore » met with a substantial weight-saving and improvement in stiffness compared to laser-welded stainless steel. The paper concludes with a summary of the other technical innovations and developments in the F408 vehicle.« less

Flywheel energy storage for electromechanical actuation systems

NASA Astrophysics Data System (ADS)

Hockney, Richard L.; Goldie, James H.; Kirtley, James L.

The authors describe a flywheel energy storage system designed specifically to provide load-leveling for a thrust vector control (TVC) system using electromechanical actuators (EMAs). One of the major advantages of an EMA system over a hydraulic system is the significant reduction in total energy consumed during the launch profile. Realization of this energy reduction will, however, require localized energy storage capable of delivering the peak power required by the EMAs. A combined flywheel-motor/generator unit which interfaces directly to the 20-kHz power bus represents an ideal candidate for this load leveling. The overall objective is the definition of a flywheel energy storage system for this application. The authors discuss progress on four technical objectives: (1) definition of the specifications for the flywheel-motor/generator system, including system-level trade-off analysis; (2) design of the flywheel rotor; (3) design of the motor/generator; and (4) determination of the configuration for the power management system.

Management of the aging of critical safety-related concrete structures in light-water reactor plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naus, D.J.; Oland, C.B.; Arndt, E.G.

1990-01-01

The Structural Aging Program has the overall objective of providing the USNRC with an improved basis for evaluating nuclear power plant safety-related structures for continued service. The program consists of a management task and three technical tasks: materials property data base, structural component assessment/repair technology, and quantitative methodology for continued-service determinations. Objectives, accomplishments, and planned activities under each of these tasks are presented. Major program accomplishments include development of a materials property data base for structural materials as well as an aging assessment methodology for concrete structures in nuclear power plants. Furthermore, a review and assessment of inservice inspection techniquesmore » for concrete materials and structures has been complete, and work on development of a methodology which can be used for performing current as well as reliability-based future condition assessment of concrete structures is well under way. 43 refs., 3 tabs.« less

Bibliography on ground water in glacial-aquifer systems in the Northeastern United States

USGS Publications Warehouse

Wiltshire, Denise A.; Lyford, Forest P.; Cohen, A.J.

1986-01-01

The U.S. Geological Survey established the Regional Aquifer-System Analysis (RASA) program to evaluate major interconnected aquifers or groups of aquifers that share similar characteristics within a region. One of the objectives of the Northeastern Glacial RASA is to provide information on the occurrence and quality of ground water in glacial deposits in ten States: Maine, New Hampshire, Vermont, Massachusetts, Rhode Island, Connecticut, New York, Ohio, Pennsylvania, and New Jersey. To help meet the objectives of the RASA program, an automated bibliographic data base was developed. The data base contains references to ground-water resources of glacial-aquifer systems in the ten States listed above. This bibliography contains more than 700 ground-water related references that date from 1839 through 1984. The bibliography lists books, journal articles, conference proceedings, government and other technical reports, theses, and maps. Unpublished manuscripts, publications in press, newspaper articles, and book reviews are omitted from the bibliography.

HLLV avionics requirements study and electronic filing system database development

NASA Technical Reports Server (NTRS)

1994-01-01

This final report provides a summary of achievements and activities performed under Contract NAS8-39215. The contract's objective was to explore a new way of delivering, storing, accessing, and archiving study products and information and to define top level system requirements for Heavy Lift Launch Vehicle (HLLV) avionics that incorporate Vehicle Health Management (VHM). This report includes technical objectives, methods, assumptions, recommendations, sample data, and issues as specified by DPD No. 772, DR-3. The report is organized into two major subsections, one specific to each of the two tasks defined in the Statement of Work: the Index Database Task and the HLLV Avionics Requirements Task. The Index Database Task resulted in the selection and modification of a commercial database software tool to contain the data developed during the HLLV Avionics Requirements Task. All summary information is addressed within each task's section.

Creating technical heritage object replicas in a virtual environment

NASA Astrophysics Data System (ADS)

Egorova, Olga; Shcherbinin, Dmitry

2016-03-01

The paper presents innovative informatics methods for creating virtual technical heritage replicas, which are of significant scientific and practical importance not only to researchers but to the public in general. By performing 3D modeling and animation of aircrafts, spaceships, architectural-engineering buildings, and other technical objects, the process of learning is achieved while promoting the preservation of the replicas for future generations. Modern approaches based on the wide usage of computer technologies attract a greater number of young people to explore the history of science and technology and renew their interest in the field of mechanical engineering.

Third Progress and Information Report of the Vocational-Technical Education Consortium of States.

ERIC Educational Resources Information Center

Lee, Connie W.; And Others

This description of major activities and accomplishments of the Vocational-Technical Education Consortium of the States (V-TECS) since the second progress report of May, 1975, is designed to provide the reader with a basic understanding of the processes and procedures used by the consortium in achieving its major goal: The production of catalogs…

ECUT (Energy Conversion and Utilization Technologies) program: Biocatalysis project

NASA Technical Reports Server (NTRS)

Baresi, Larry

1989-01-01

The Annual Report presents the fiscal year (FY) 1988 research activities and accomplishments, for the Biocatalysis Project of the U.S. Department of Energy, Energy Conversion and Utilization Technologies (ECUT) Division. The ECUT Biocatalysis Project is managed by the Jet Propulsion Laboratory, California Institute of Technology. The Biocatalysis Project is a mission-oriented, applied research and exploratory development activity directed toward resolution of the major generic technical barriers that impede the development of biologically catalyzed commercial chemical production. The approach toward achieving project objectives involves an integrated participation of universities, industrial companies and government research laboratories. The Project's technical activities were organized into three work elements: (1) The Molecular Modeling and Applied Genetics work element includes research on modeling of biological systems, developing rigorous methods for the prediction of three-dimensional (tertiary) protein structure from the amino acid sequence (primary structure) for designing new biocatalysis, defining kinetic models of biocatalyst reactivity, and developing genetically engineered solutions to the generic technical barriers that preclude widespread application of biocatalysis. (2) The Bioprocess Engineering work element supports efforts in novel bioreactor concepts that are likely to lead to substantially higher levels of reactor productivity, product yields and lower separation energetics. Results of work within this work element will be used to establish the technical feasibility of critical bioprocess monitoring and control subsystems. (3) The Bioprocess Design and Assessment work element attempts to develop procedures (via user-friendly computer software) for assessing the energy-economics of biocatalyzed chemical production processes, and initiation of technology transfer for advanced bioprocesses.

ECUT (Energy Conversion and Utilization Technologies) program: Biocatalysis project

NASA Astrophysics Data System (ADS)

Baresi, Larry

1989-03-01

The Annual Report presents the fiscal year (FY) 1988 research activities and accomplishments, for the Biocatalysis Project of the U.S. Department of Energy, Energy Conversion and Utilization Technologies (ECUT) Division. The ECUT Biocatalysis Project is managed by the Jet Propulsion Laboratory, California Institute of Technology. The Biocatalysis Project is a mission-oriented, applied research and exploratory development activity directed toward resolution of the major generic technical barriers that impede the development of biologically catalyzed commercial chemical production. The approach toward achieving project objectives involves an integrated participation of universities, industrial companies and government research laboratories. The Project's technical activities were organized into three work elements: (1) The Molecular Modeling and Applied Genetics work element includes research on modeling of biological systems, developing rigorous methods for the prediction of three-dimensional (tertiary) protein structure from the amino acid sequence (primary structure) for designing new biocatalysis, defining kinetic models of biocatalyst reactivity, and developing genetically engineered solutions to the generic technical barriers that preclude widespread application of biocatalysis. (2) The Bioprocess Engineering work element supports efforts in novel bioreactor concepts that are likely to lead to substantially higher levels of reactor productivity, product yields and lower separation energetics. Results of work within this work element will be used to establish the technical feasibility of critical bioprocess monitoring and control subsystems. (3) The Bioprocess Design and Assessment work element attempts to develop procedures (via user-friendly computer software) for assessing the energy-economics of biocatalyzed chemical production processes, and initiation of technology transfer for advanced bioprocesses.

Isotope Fractionation by Diffusion in Liquids (Final Technical Report)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richter, Frank

The overall objective of the DOE-funded research by grant DE-FG02-01ER15254 was document and quantify kinetic isotope fractionations during chemical and thermal (i.e., Soret) diffusion in liquids (silicate melts and water) and in the later years to include alloys and major minerals such as olivine and pyroxene. The research involved both laboratory experiments and applications to natural settings. The key idea is that major element zoning on natural geologic materials is common and can arise for either changes in melt composition during cooling and crystallization or from diffusion. The isotope effects associated with diffusion that we have documented are the keymore » for determining whether or not the zoning observed in a natural system was the result of diffusion. Only in those cases were the zoning is demonstrably due to diffusion can use independently measured rates of diffusion to constrain the thermal evolution of the system.« less

New Directions in Space: A Report on the Lunar and Mars Initiatives

NASA Technical Reports Server (NTRS)

Seitz, Frederick; Hawkins, Willis; Jastrow, Robert; Nierenberg, William A.

1990-01-01

This report focuses on one aspect of the current space program: The establishment of a manned base on the Moon and the manned exploration of Mars. These missions were announced by the President last year as a major U.S. space policy objective to be implemented under the leadership of the Vice President, acting as Chairman of the National Space Council. On March 8, 1990, the White House released Presidential guidelines for the execution of the lunar and Mars programs. The guidelines stressed the need for new approaches and the development of innovative technologies with a potential for major cost, schedule and performance improvements. They also called for a competitive environment, with several years allotted to the definition of at least two significantly different human space exploration "reference architectures." Selection of the final technical concepts for the mission is scheduled to occur only after the relative merits of the competing reference architectures have been evaluated.

A Comparison of Career Technical Education--16 Career Pathway High School Participants with Non-Participants on Academic Achievement, School Engagement, and Development of Technical Skills

ERIC Educational Resources Information Center

Orozco, Edith Aimee

2010-01-01

The objective of this research was to compare Career Technical Education--16 Career Pathway high school participants with non-participants on academic achievement, development of technical skills and school engagement. Academic achievement was measured by Exit Level Math and English Language Arts Texas Assessment of Knowledge and Skills (TAKS)…

34 CFR 366.15 - What selection criteria does the Secretary use?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Training and Technical Assistance § 366.15 What selection criteria does the Secretary use? The Secretary uses the following criteria to evaluate applications for new awards for training and technical... project; and (2) How the objectives further training and technical assistance with respect to planning...

Critical Field Experiments on Uses of Scientific and Technical Information.

ERIC Educational Resources Information Center

Rubenstein, Albert H.; And Others

Research in the field of "information-seeking behavior of scientists and engineers" has been done on the behavior and preferences of researchers with respect to technical literature, computer-based information systems, and other scientific and technical information (STI) systems and services. The objectives of this project are: (1) to…

76 FR 33332 - Announcement of Funding Awards for the Technical Assistance and Capacity Building under the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-08

... of key Departmental objectives, including but not limited to, energy efficiency and green building... Awards for the Technical Assistance and Capacity Building under the Transformation Initiative Program...) for the Technical Assistance and Capacity Building under the Transformation Initiative program for...

Implementation of quality improvement techniques for management and technical processes in the ACRV project

NASA Technical Reports Server (NTRS)

Raiman, Laura B.

1992-01-01

Total Quality Management (TQM) is a cooperative form of doing business that relies on the talents of everyone in an organization to continually improve quality and productivity, using teams and an assortment of statistical and measurement tools. The objective of the activities described in this paper was to implement effective improvement tools and techniques in order to build work processes which support good management and technical decisions and actions which are crucial to the success of the ACRV project. The objectives were met by applications in both the technical and management areas. The management applications involved initiating focused continuous improvement projects with widespread team membership. The technical applications involved applying proven statistical tools and techniques to the technical issues associated with the ACRV Project. Specific activities related to the objective included working with a support contractor team to improve support processes, examining processes involved in international activities, a series of tutorials presented to the New Initiatives Office and support contractors, a briefing to NIO managers, and work with the NIO Q+ Team. On the technical side, work included analyzing data from the large-scale W.A.T.E.R. test, landing mode trade analyses, and targeting probability calculations. The results of these efforts will help to develop a disciplined, ongoing process for producing fundamental decisions and actions that shape and guide the ACRV organization .

Implementation of quality improvement techniques for management and technical processes in the ACRV project

NASA Astrophysics Data System (ADS)

Raiman, Laura B.

1992-12-01

Total Quality Management (TQM) is a cooperative form of doing business that relies on the talents of everyone in an organization to continually improve quality and productivity, using teams and an assortment of statistical and measurement tools. The objective of the activities described in this paper was to implement effective improvement tools and techniques in order to build work processes which support good management and technical decisions and actions which are crucial to the success of the ACRV project. The objectives were met by applications in both the technical and management areas. The management applications involved initiating focused continuous improvement projects with widespread team membership. The technical applications involved applying proven statistical tools and techniques to the technical issues associated with the ACRV Project. Specific activities related to the objective included working with a support contractor team to improve support processes, examining processes involved in international activities, a series of tutorials presented to the New Initiatives Office and support contractors, a briefing to NIO managers, and work with the NIO Q+ Team. On the technical side, work included analyzing data from the large-scale W.A.T.E.R. test, landing mode trade analyses, and targeting probability calculations. The results of these efforts will help to develop a disciplined, ongoing process for producing fundamental decisions and actions that shape and guide the ACRV organization .

Tanks Focus Area site needs assessment FY 1998

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This report documents the process used by the Tanks Focus Area (TFA) to analyze and develop responses to technology needs submitted by four major US Department of Energy (DOE) sites with radioactive tank waste problems, and the initial results of the analysis. The sites are the Hanford Site, Idaho National Engineering and Environmental Laboratory (INEEL), Oak Ridge Reservation (ORR), and Savannah River Site (SRS). This document describes the TFA`s process of collecting site needs, analyzing them, and creating technical responses to the sites. It also summarizes the information contained within the TFA needs database, portraying information provided by four majormore » DOE sites with tank waste problems. The overall TFA program objective is to deliver a tank technology program that reduces the current cost, and the operational and safety risks of tank remediation. The TFA`s continues to enjoy close, cooperative relationships with each site. During the past year, the TFA has fostered exchanges of technical information between sites. These exchanges have proven to be healthy for all concerned. The TFA recognizes that site technology needs often change, and the TFA must be prepared not only to amend its program in response, but to help the sites arrive at the best technical approach to solve revised site needs.« less

48 CFR 207.106 - Additional requirements for major systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... of complete technical data packages. (viii) Periodic competitions for subsystem upgrades. (ix... Government to use technical data to competitively reprocure identical items or components of the system if... otherwise entitled to unlimited rights in technical data. (B) If the contracting officer makes a...

48 CFR 207.106 - Additional requirements for major systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... of complete technical data packages. (viii) Periodic competitions for subsystem upgrades. (ix... Government to use technical data to competitively reprocure identical items or components of the system if... otherwise entitled to unlimited rights in technical data. (B) If the contracting officer makes a...

48 CFR 207.106 - Additional requirements for major systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... of complete technical data packages. (viii) Periodic competitions for subsystem upgrades. (ix... Government to use technical data to competitively reprocure identical items or components of the system if... otherwise entitled to unlimited rights in technical data. (B) If the contracting officer makes a...

48 CFR 207.106 - Additional requirements for major systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... of complete technical data packages. (viii) Periodic competitions for subsystem upgrades. (ix... Government to use technical data to competitively reprocure identical items or components of the system if... otherwise entitled to unlimited rights in technical data. (B) If the contracting officer makes a...

48 CFR 207.106 - Additional requirements for major systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... of complete technical data packages. (viii) Periodic competitions for subsystem upgrades. (ix... Government to use technical data to competitively reprocure identical items or components of the system if... otherwise entitled to unlimited rights in technical data. (B) If the contracting officer makes a...

Department of Clinical Investigation Annual Research Progress Report, Fiscal Year 1984. Volume 1,

DTIC Science & Technology

1984-10-01

on a low dosage of medication . Technical Approach: None. Progress: The placebo has not been received from the company. Since the drug company...determine the effect of high dose Ar-C intensification therapy on the -. incidence of CNS relapse. - Technical Approach: All patients with a new...Enrolled to Date: 7 Date of Periodic Review Results Objective(s): To determine the incidence of

Setting Performance Standards for Technical and Nontechnical Competence in General Surgery.

PubMed

Szasz, Peter; Bonrath, Esther M; Louridas, Marisa; Fecso, Andras B; Howe, Brett; Fehr, Adam; Ott, Michael; Mack, Lloyd A; Harris, Kenneth A; Grantcharov, Teodor P

2017-07-01

The objectives of this study were to (1) create a technical and nontechnical performance standard for the laparoscopic cholecystectomy, (2) assess the classification accuracy and (3) credibility of these standards, (4) determine a trainees' ability to meet both standards concurrently, and (5) delineate factors that predict standard acquisition. Scores on performance assessments are difficult to interpret in the absence of established standards. Trained raters observed General Surgery residents performing laparoscopic cholecystectomies using the Objective Structured Assessment of Technical Skill (OSATS) and the Objective Structured Assessment of Non-Technical Skills (OSANTS) instruments, while as also providing a global competent/noncompetent decision for each performance. The global decision was used to divide the trainees into 2 contrasting groups and the OSATS or OSANTS scores were graphed per group to determine the performance standard. Parametric statistics were used to determine classification accuracy and concurrent standard acquisition, receiver operator characteristic (ROC) curves were used to delineate predictive factors. Thirty-six trainees were observed 101 times. The technical standard was an OSATS of 21.04/35.00 and the nontechnical standard an OSANTS of 22.49/35.00. Applying these standards, competent/noncompetent trainees could be discriminated in 94% of technical and 95% of nontechnical performances (P < 0.001). A 21% discordance between technically and nontechnically competent trainees was identified (P < 0.001). ROC analysis demonstrated case experience and trainee level were both able to predict achieving the standards with an area under the curve (AUC) between 0.83 and 0.96 (P < 0.001). The present study presents defensible standards for technical and nontechnical performance. Such standards are imperative to implementing summative assessments into surgical training.

New technology implementation: Technical, economic and political factors

NASA Technical Reports Server (NTRS)

Dean, J. W., Jr.; Susman, G. I.; Porter, P. S.

1985-01-01

An analysis is presented of the process of implementing advanced manufacturing technology, based on studies of numerous organizations. This process is seen as consisting of a series of decisions with technical, economic, and political objectives. Frequency decisions involve specifications, equipment, resources/organization, and location. Problems in implementation are viewed as resulting from tradeoffs among the objectives, the tendency of decision makers to emphasize some objectives at the expense of others, and the propensity of problems to spread from one area to another. Three sets of recommendations, based on this analysis, are presented.

Middlesex Community College Software Technical Writing Program.

ERIC Educational Resources Information Center

Middlesex Community Coll., Bedford, MA.

This document describes the Software Technical Writing Program at Middlesex Community College (Massachusetts). The program is a "hands-on" course designed to develop job-related skills in three major areas: technical writing, software, and professional skills. The program was originally designed in cooperation with the Massachusetts High…

15 CFR 295.6 - Criteria for selection.

Code of Federal Regulations, 2010 CFR

2010-01-01

... innovation, the technical approach, major technical hurdles, the attendant risks, and clearly establish... project and project's organizational structure and management plan, including the extent to which...

77 FR 12799 - Census Scientific Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-02

...-SAC). The Committee will address policy, research, and technical issues relating to a full range of... and technical expertise, as appropriate, to address Census Bureau program needs and objectives. The...

75 FR 16078 - Census Scientific Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-31

...-SAC). The Committee will address policy, research, and technical issues relating to a full range of... and technical expertise, as appropriate, to address Census Bureau program needs and objectives. The...

76 FR 54197 - Census Scientific Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-31

...-SAC). The Committee will address policy, research, and technical issues relating to a full range of... scientific and technical expertise, as appropriate, to address Census Bureau program needs and objectives...

Reader-Centered Technical Writing

NASA Astrophysics Data System (ADS)

Narayanan, M.

2012-12-01

Technical writing is an essential part of professional communication and in recent years it has shifted from a genre-based approach. Formerly, technical writing primarily focused on generating templates of documents and sometimes it was creating or reproducing traditional forms with minor modifications and updates. Now, technical writing looks at the situations surrounding the need to write. This involves deep thinking about the goals and objectives of the project on hand. Furthermore, one observes that it is very important for any participatory process to have the full support of management. This support needs to be well understood and believed by employees. Professional writing may be very persuasive in some cases. When presented in the appropriate context, technical writing can persuade a company to improve work conditions ensuring employee safety and timely production. However, one must recognize that lot of professional writing still continues to make use of reports and instruction manuals. Normally, technical and professional writing addresses four aspects. Objective: The need for generating a given professionally written technical document and the goals the document is expected to achieve and accomplish. Clientele: The clientele who will utilize the technical document. This may include the people in the organization. This may also include "unintended readers." Customers: The population that may be affected by the content of the technical document generated. This includes the stakeholders who will be influenced. Environment: The background in which the document is created. Also, the nature of the situation that warranted the generation of the document. Swiss Psychologist Jean Piaget's view of Learning focuses on three aspects. The author likes to extend Jean Piaget's ideas to students, who are asked to prepare and submit Reader-Centered Technical Writing reports and exercises. Assimilation: Writers may benefit specifically, by assimilating a new object into an old schema. This reinforces basic engineering and mathematical design concepts. Accommodation: Here, it may work in a different manner. Writers may have to accommodate an old schema to a new object. This helps engineers to focus more on applications. Adaptation: Assimilation and accommodation are the two sides of adaptation, Jean Piaget's term for what most of us would call learning. Mathematical design concepts generated by students should be suitable for creative engineering applications. References : Phillips, D. C. and Soltis, Jonas F. (2003) "Piagetian Structures and Psychological Constructivism," in Perspectives on Learning (4th edition). New York: Teachers College Press. Salvo, Michael J. (2001). Ethics of Engagement: User-Centered Design and Rhetorical Methodology. Technical Communication Quarterly Volume 10, Issue 3, 2001. pages 273-290. http://www.ship.edu/~cgboeree/piaget.html http://owl.english.purdue.edu/owl/resource/624/01/

Environmental Sciences Division annual progress report for period ending September 30, 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-04-01

This progress report summarizes the research and development activities conducted in the Environmental Sciences Division of Oak Ridge National Laboratory during the period October 1, 1990, through September 30, 1991. The report is structured to provide descriptions of current activities and accomplishments in each of the division's major organizational units. Following the sections describing the organizational units is a section devoted to lists of information necessary to convey the scope of the work in the division. The Environmental Sciences Division (ESD) at Oak Ridge National Laboratory (ORNL) conducts environmental research and analyses associated with both energy technology development and themore » interactions between people and the environment. The division engages in basic and applied research for a diverse list of sponsors. While the US Department of Energy (DOE) is the primary sponsor ESD staff also perform research for other federal agencies, state agencies, and private industry. The division works collaboratively with federal agencies, universities, and private organizations in achieving its research objectives and hosts a large number of visiting investigators from these organizations. Given the diverse interdisciplinary specialization of its staff, ESD provides technical expertise on complex environmental problems and renders technical leadership for major environmental issues of national and local concern. This progress report highlights many of ESD's accomplishment in these and other areas in FY 1991.« less

Environmental Sciences Division annual progress report for period ending September 30, 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-04-01

This progress report summarizes the research and development activities conducted in the Environmental Sciences Division of Oak Ridge National Laboratory during the period October 1, 1990, through September 30, 1991. The report is structured to provide descriptions of current activities and accomplishments in each of the division`s major organizational units. Following the sections describing the organizational units is a section devoted to lists of information necessary to convey the scope of the work in the division. The Environmental Sciences Division (ESD) at Oak Ridge National Laboratory (ORNL) conducts environmental research and analyses associated with both energy technology development and themore » interactions between people and the environment. The division engages in basic and applied research for a diverse list of sponsors. While the US Department of Energy (DOE) is the primary sponsor ESD staff also perform research for other federal agencies, state agencies, and private industry. The division works collaboratively with federal agencies, universities, and private organizations in achieving its research objectives and hosts a large number of visiting investigators from these organizations. Given the diverse interdisciplinary specialization of its staff, ESD provides technical expertise on complex environmental problems and renders technical leadership for major environmental issues of national and local concern. This progress report highlights many of ESD`s accomplishment in these and other areas in FY 1991.« less

Developments in Technical Education in the British Caribbean, 1940-60.

ERIC Educational Resources Information Center

Pemberton, S. Macpherson

The paper discusses developments in technical education in the British West Indies from 1940-1960 emphasizing the relation between education and economic development. The objective is to analyze the economic basis of progress in technical education. The document is presented in four chapters. Chapter I summarizes historical background prior to…

User Problems Associated with the Services of Federal and Quasi-Federal Technical Information Producing Agencies.

ERIC Educational Resources Information Center

Los Angeles Regional Technical Information Users Council, CA.

Nine reports of the Los Angeles Regional Technical Information Users Council, which identify and discuss user problem areas and recommend solutions, comprise this document. The topics of the reports are: (1) Air Force Technical Objective Document Release Program (AFTOD); (2) Army Qualitative Requirements Information Program (QDRI); (3)…

Design Study for Project on Standard Operating Procedures for Technical Library Services.

ERIC Educational Resources Information Center

Libbey, Miles A.; And Others

The overall objective of the Technical Information Support Activities (TISA) Project is the production of a "Post Commander's Handbook." The handbook will be instrumental in achieving greater utilization of available technical information resources to assist army scientists and engineers engaged in the support of army combat and other…

78 FR 66375 - Announcement of Funding Awards for the OneCPD Plus: Technical Assistance and Capacity Building...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-05

... of key Departmental objectives, including but not limited to, energy efficiency and green building... Awards for the OneCPD Plus: Technical Assistance and Capacity Building Under the Transformation... Notice of Funding Availability (NOFA) for the OneCPD Plus: Technical Assistance and Capacity Building...

Exotic objects of atomic physics

NASA Astrophysics Data System (ADS)

Eletskii, A. V.

2017-11-01

There has been presented a short survey of physical properties, methods of production and exploration as well as directions of practical usage of the objects of atomic physics which are not yet described in detail in modern textbooks and manuals intended for students of technical universities. The family of these objects includes negative and multicharged ions, Rydberg atoms, excimer molecules, clusters. Besides of that, in recent decades this family was supplemented with new nanocarbon structures such as fullerenes, carbon nanotubes and graphene. The textbook “Exotic objects of atomic physics” [1] edited recently contains some information on the above-listed objects of the atomic physics. This textbook can be considered as a supplement to classic courses of atomic physics teaching in technical universities.

The Boston Study: Analysis of a Major Metropolitan Business- and Technical-Communication Market.

ERIC Educational Resources Information Center

Buchholz, William J.

1989-01-01

Presents a year-long study of the duties, skills, and knowledge required of business- and technical-communication professionals in Boston, Massachusetts. Focuses on six categories of practice: technical communication, publishing, public relations, marketing, development, and training. Suggests that in the next decade communication practitioners…

A Taxonomy of Technical Assistance Skills.

ERIC Educational Resources Information Center

Ogden, Evelyn; Musumeci, Marilyn

To operationalize the Technical Assistance Brokerage System, the first major task called for the development of a taxonomy of training and technical assistance services specifying requisite skills and skill clusters by the dimensions of client type, stages of dissemination, and levels of experience. From a literature search approximately 400…

Ferroelectric Polymers with Ultrahigh Energy Density, Low Loss, and Broad Operation Temperature for Navy Pulse Power Capacitors

DTIC Science & Technology

2014-02-01

by the electron hopping theory in the amorphous material. By further tailoring the molecular structures, meta-aromatic polyurea which possesses a...higher dipolar density than many polyureas reported in the literature has been synthesized. Preliminary experimental results show that an enhanced...dielectric constant and higher energy density can be achieved in the new meta-aromatic polyurea . Technical section; Technical Objective: The objective

Technical Objective Document. Fiscal Year 1989

DTIC Science & Technology

1987-12-01

other special interest areas/technologies; and throuch a " delphi " process with the Center Technical Investment Committee *develop a "puts and takes...radar and larce optical systems in space, the detection and trackina of low observables, and the operation of sensors for tracking objects in space for...for reducing the processing time for adaptive beamforming in receive arrays, self-coherina techniques in larce distributed arrays and array self

Extraction and Analysis of Major Autumn Crops in Jingxian County Based on Multi - Temporal gf - 1 Remote Sensing Image and Object-Oriented

NASA Astrophysics Data System (ADS)

Ren, B.; Wen, Q.; Zhou, H.; Guan, F.; Li, L.; Yu, H.; Wang, Z.

2018-04-01

The purpose of this paper is to provide decision support for the adjustment and optimization of crop planting structure in Jingxian County. The object-oriented information extraction method is used to extract corn and cotton from Jingxian County of Hengshui City in Hebei Province, based on multi-period GF-1 16-meter images. The best time of data extraction was screened by analyzing the spectral characteristics of corn and cotton at different growth stages based on multi-period GF-116-meter images, phenological data, and field survey data. The results showed that the total classification accuracy of corn and cotton was up to 95.7 %, the producer accuracy was 96 % and 94 % respectively, and the user precision was 95.05 % and 95.9 % respectively, which satisfied the demand of crop monitoring application. Therefore, combined with multi-period high-resolution images and object-oriented classification can be a good extraction of large-scale distribution of crop information for crop monitoring to provide convenient and effective technical means.

Product Development as a Fuzzy Interface between Technical and Non-technical Education.

ERIC Educational Resources Information Center

Masarnau, Juan

1988-01-01

Discusses a product development structure, including marketing, design, technology, industrial manufacturing, reasoning, and objects. Describes needs of the interface in terms of marketing, industrial design, technology, and industry. (YP)

Technical success, technique efficacy and complications of minimally-invasive imaging-guided percutaneous ablation procedures of breast cancer: A systematic review and meta-analysis.

PubMed

Mauri, Giovanni; Sconfienza, Luca Maria; Pescatori, Lorenzo Carlo; Fedeli, Maria Paola; Alì, Marco; Di Leo, Giovanni; Sardanelli, Francesco

2017-08-01

To systematically review studies concerning imaging-guided minimally-invasive breast cancer treatments. An online database search was performed for English-language articles evaluating percutaneous breast cancer ablation. Pooled data and 95% confidence intervals (CIs) were calculated. Technical success, technique efficacy, minor and major complications were analysed, including ablation technique subgroup analysis and effect of tumour size on outcome. Forty-five studies were analysed, including 1,156 patients and 1,168 lesions. Radiofrequency (n=577; 50%), microwaves (n=78; 7%), laser (n=227; 19%), cryoablation (n=156; 13%) and high-intensity focused ultrasound (HIFU, n=129; 11%) were used. Pooled technical success was 96% (95%CI 94-97%) [laser=98% (95-99%); HIFU=96% (90-98%); radiofrequency=96% (93-97%); cryoablation=95% (90-98%); microwave=93% (81-98%)]. Pooled technique efficacy was 75% (67-81%) [radiofrequency=82% (74-88); cryoablation=75% (51-90); laser=59% (35-79); HIFU=49% (26-74)]. Major complications pooled rate was 6% (4-8). Minor complications pooled rate was 8% (5-13%). Differences between techniques were not significant for technical success (p=0.449), major complications (p=0.181) or minor complications (p=0.762), but significant for technique efficacy (p=0.009). Tumour size did not impact on variables (p>0.142). Imaging-guided percutaneous ablation techniques of breast cancer have a high rate of technical success, while technique efficacy remains suboptimal. Complication rates are relatively low. • Imaging-guided ablation techniques for breast cancer are 96% technically successful. • Overall technique efficacy rate is 75% but largely inhomogeneous among studies. • Overall major and minor complication rates are low (6-8%).

Development of a high resolution liquid xenon imaging chamber for gamma-ray astronomy

NASA Technical Reports Server (NTRS)

Aprile, Elena

1991-01-01

The objective was to develop the technology of liquid xenon (LXe) detectors for spectroscopy and imaging of gamma rays from astrophysical sources emitting in the low to medium energy regime. In particular, the technical challenges and the physical processes relevant to the realization of the LXe detector operated as a Time Projection Chamber (TPC) were addressed and studied. Experimental results were obtained on the following topics: (1) long distance drift of free electrons in LXe (purity); (2) scintillation light yield for electrons and alphas in LXe (triggering); and (3) ionization yield for electrons and gamma rays in LXe (energy resolution). The major results from the investigations are summarized.

Enhanced Molecular Sieve CO2 Removal Evaluation

NASA Technical Reports Server (NTRS)

Rose, Susan; ElSherif, Dina; MacKnight, Allen

1996-01-01

The objective of this research is to quantitatively characterize the performance of two major types of molecular sieves for two-bed regenerative carbon dioxide removal at the conditions compatible with both a spacesuit and station application. One sorbent is a zeolite-based molecular sieve that has been substantially improved over the materials used in Skylab. The second sorbent is a recently developed carbon-based molecular sieve. Both molecular sieves offer the potential of high payoff for future manned missions by reducing system complexity, weight (including consumables), and power consumption in comparison with competing concepts. The research reported here provides the technical data required to improve CO2 removal systems for regenerative life support systems for future IVA and EVA missions.

A Summary of Technical Problems Associated With Broadband Cable Teleservices Development. A Survey of Technical Requirements for Broadband Cable Teleservices; Volume One.

ERIC Educational Resources Information Center

McManamon, P. M.; Utlaut, W. F.

The results of a survey of cable television (CATV) and related technological industries are summarized. In this, the first of a series of seven reports, attention is focused upon some major technical factors which need to be considered in order that a transition from the technical state of today's cable television and services to new teleservices…

Curriculum Programs in Action, Their Administration and Evaluation; Report of a Conference Devoted to Description, Demonstration, and Evaluative Discussions of Innovative Programs in Vocational-Technical Education.

ERIC Educational Resources Information Center

San Francisco State Coll., CA. Center for Technological Education.

The presentation, review and evaluation of innovative vocational-technical curriculums in operation was the major function of a San Francisco conference sponsored jointly by the Center for Technical Education at San Francisco State College and the Center for Studies in Vocational and Technical Education at the University of Wisconsin. Major…

Cigarette Smoking and Cessation among Trade or Technical School Students in Texas

ERIC Educational Resources Information Center

Loukas, Alexandra; Murphy, Jonna L.; Gottlieb, Nell H.

2008-01-01

Although students enrolled in trade or technical colleges are at an elevated risk for tobacco use, virtually no information exists regarding their smoking behaviors. Objective and Participants: In the present study, the authors examined (1) the prevalence of smoking and quitting among 617 students in 2 trade or technical colleges in East Texas and…

System of technical vision for autonomous unmanned aerial vehicles

NASA Astrophysics Data System (ADS)

Bondarchuk, A. S.

2018-05-01

This paper is devoted to the implementation of image recognition algorithm using the LabVIEW software. The created virtual instrument is designed to detect the objects on the frames from the camera mounted on the UAV. The trained classifier is invariant to changes in rotation, as well as to small changes in the camera's viewing angle. Finding objects in the image using particle analysis, allows you to classify regions of different sizes. This method allows the system of technical vision to more accurately determine the location of the objects of interest and their movement relative to the camera.

Technical devices of powered roof support for the top coal caving as automation objects

NASA Astrophysics Data System (ADS)

Nikitenko, M. S.; Kizilov, S. A.; Nikolaev, P. I.; Kuznetsov, I. S.

2018-05-01

In the paper technical devices for the top coal caving as automation objects in the composition of the longwall mining complex (LTCC) are considered. The proposed concept for automation of the top coal caving process allows caving efficiency to be ensured, coal dilution to be prevented, conveyor overloading to be prevented, the shearer service personnel to be unloaded, the influence of the “human factor” to be reduced.

Research and Technology Objectives and Plans Summary (RTOPS)

NASA Technical Reports Server (NTRS)

1977-01-01

The NASA Research and Technology program for FY 1978 is represented by this compilation of the 'Summary' portions of each of the Research and Technology Objectives and Plans (RTOPS). The RTOP Summary is designed to facilitate communication and coordination among concerned technical personnel in government, in industry, and in universities. The first section contains citations and abstracts of the RTOPs. Following this section are four indexes: Subject, Technical Monitor, Responsible NASA Organization, and RTOP Number.

[Des-interest in professional educating in the production of the National Seminar on Guidelines for Nursing Education].

PubMed

Vieira, Silvana Lima; da Silva, Gilberto Tadeu Reis; Fernandes, Josicelia Dumêt; e Silva, Ana Cláudia de Azevêdo Bião; Santana, Monique Santos; Santos, Thadeu Borges Souza

2014-01-01

Documentary, retrospective, quali-quantitative research, which aimed to examine the approaches of scientific productions through summaries of the 12 and 13 national seminar on guidelines for the education in nursing, which raised the medium-level technical professional education in nursing. quantify and discuss the scientific production of events regarding the geographical distribution of authors, objectives and methodology of the studies. As a criterion for inclusion the abstracts should contain at least one of the following descriptors in the title and/or objectives: education in nursing, technical education in nursing, vocational education. Reviewed 637 abstracts, 23 met the inclusion criteria. The production was concentrated in the Southeast region in Brazil and the objectives featured mainly teaching practices of the nurses. There was little expressiveness of vocational at the event, signaling the need for more studies, considering the relevance of the technical level professionals for the Nursing profession and the health system.

The Use and Value of Defense Technical Information Center Products and Services.

ERIC Educational Resources Information Center

Roderer, Nancy K.; And Others

This study describes the use and value of the major information products and services provided by the Defense Technical Information Center (DTIC). These products and services include technical report distribution on an on-demand basis and through the Automatic Document Distribution (ADD) program; secondary information dissemination through online…

Scientific and Technical Information in Canada, Part II, Chapter 1: Government Departments and Agencies.

ERIC Educational Resources Information Center

Science Council of Canada, Ottawa (Ontario).

Canada's major scientific and technical information resources are supported largely by the Federal Government. They consist of libraries, data files, specialized information centers, and field services. The Canadian Government has no overall policy concerning the handling of scientific and technical information. The need for a national information…

Role-Playing as Critical Thinking in the Technical Writing Classroom.

ERIC Educational Resources Information Center

Wilner, Arlene

Given the affective dimension of writing in the workplace, assignments based on casebook scenarios have definite advantages in a technical or professional writing course. An English professor surveyed faculty in the Schools of Business and Education at Rider College prior to revising a course in technical writing. A majority of faculty, when asked…

Technical Writing 1987: Galloping Off in at Least Two Directions.

ERIC Educational Resources Information Center

Stohrer, Freda F.

Technical writing instructors generally agree about the absolute need for communication skills throughout the technological work place, but a survey of technical writing journal articles shows a lack of focus on ways to address business's needs for on-the-job literacy. One major advance within the profession in recent years has been the…

Technical Assistance and Changes in Nutrition and Physical Activity Practices in the National Early Care and Education Learning Collaboratives Project, 2015-2016.

PubMed

Chiappone, Alethea; Smith, Teresa M; Estabrooks, Paul A; Rasmussen, Cristy Geno; Blaser, Casey; Yaroch, Amy L

2018-04-26

The National Early Care and Education Learning Collaboratives Project (ECELC) aims to improve best practices in early care and education (ECE) programs in topic areas of the Nutrition and Physical Activity Self-Assessment in Child Care (NAP SACC). Technical assistance is a component of the ECELC, yet its effect on outcomes is unclear. Beyond dose and duration of technical assistance, limited research exists on characteristics of technical assistance that contribute to outcomes. The objective of this study was to identify and describe technical assistance characteristics and explore associations with NAP SACC outcomes. We collected data from 10 collaboratives comprising 84 ECE programs in 2 states in 2015-2016. The objective of technical assistance was to support programs in improving best practices. Technical assistance was provided to programs via on-site, telephone, or email and was tailored to program needs. We used a mixed-methods design to examine associations between technical assistance and NAP SACC outcomes. We used multiple regression analysis to assess quantitative data and qualitative comparative analysis to determine necessary and sufficient technical assistance conditions supporting NAP SACC outcomes. We also conducted a document review to describe technical assistance that referred conditions identified by the qualitative comparative analysis. Regression analyses detected an inverse relationship between changes in NAP SACC scores and hours of technical assistance. No clear pattern emerged in the qualitative comparative analysis, leaving no necessary and sufficient conditions. However, the qualitative comparative analysis identified feedback as a potentially important component of technical assistance, whereas resource sharing and frequent email were characteristics that seemed to reduce the likelihood of improved outcomes. Email and resource sharing were considered primarily general information rather than tailored technical assistance. Technical assistance may be used in programs and made adaptable to program needs. The inclusion and evaluation of technical assistance, especially tailored approaches, is warranted for environmental interventions, including ECE settings.

Low Activity Waste Pretreatment System Bench-Scale Testing: Supporting Integrated Testing and Facility Safety Analyses - 17171

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schonewill, Philip P.; Russell, Renee L.; Daniel, Richard C.

The Low Activity Waste Pretreatment System (LAWPS) is being designed to enable the direct feed of waste to the Hanford Tank Waste Treatment and Immobilization Plant (WTP) Low Activity Waste (LAW) facility to be immobilized. Prior to construction of the LAWPS, pilot-scale integrated testing of the key unit operations (crossflow filtration, ion exchange using spherical resorcinol-formaldehyde (sRF) resin) will be conducted by a team led by Washington River Protection Solutions (WRPS) to increase the technology maturation level of the facility’s critical technology elements. As a part of this effort, Pacific Northwest National Laboratory (PNNL) has conducted a series of bench-scalemore » (or engineering-scale) tests to perform two major objectives: (1) support pilot-scale integrated testing of the LAWPS by supplying information or performance data in advance of operating the pilot-scale facility; and (2) collect data needed to establish or confirm assumptions/approaches planned for implementation in the LAWPS safety basis. The first objective was focused in two technical areas: developing simulants that are representative of expected waste feed and can be produced at larger scales, and using these simulants in a bench-scale crossflow filter to establish expected solid-liquid separation performance. The crossflow filter was also used to observe the efficacy (with respect to filter production rate) of selected operational strategies. The second objective also included two technical areas: measuring the effect of sRF resin on hydrogen generation rate under irradiation, and demonstrating that the planned hydrogen management approach is effective and robust. The hydrogen management strategy involves fluidization of the sRF resin bed in the ion exchange columns and recirculating the liquid, a scenario that is planned for testing at full column height. The full height tests at PNNL also supported full-scale IX column testing conducted as part of the technology maturation plan. The experimental approaches used at PNNL in these four technical areas are summarized and selected key preliminary results are provided.« less

The needs analysis of learning Inventive Problem Solving for technical and vocational students

NASA Astrophysics Data System (ADS)

Sai'en, Shanty; Tze Kiong, Tee; Yunos, Jailani Md; Foong, Lee Ming; Heong, Yee Mei; Mohaffyza Mohamad, Mimi

2017-08-01

Malaysian Ministry of Education highlighted in their National Higher Education Strategic plan that higher education’s need to focus adopting 21st century skills in order to increase a graduate’s employability. Current research indicates that most graduate lack of problem solving skills to help them securing the job. Realising the important of this skill hence an alternative way suggested as an option for high institution’s student to solve their problem. This study was undertaken to measure the level of problem solving skills, identify the needs of learning inventive problem solving skills and the needs of developing an Inventive problem solving module. Using a questionnaire, the study sampled 132 students from Faculty of Technical and Vocational Education. Findings indicated that majority of the students fail to define what is an inventive problem and the root cause of a problem. They also unable to state the objectives and goal thus fail to solve the problem. As a result, the students agreed on the developing Inventive Problem Solving Module to assist them.

Materials R&D-student internships

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thompson, R.B.; Jiles, D.C.; Chumbley, L.S.

1995-05-01

This program has as an objective the conduct of programmatic research for the Advanced Industrial Concepts Materials Program while training minority graduate students in the process. Well-known demographics indicate that minorities will constitute an increasing fraction of our future work force. Consequently, efforts have been initiated to increase the fraction of minorities and women who choose technical career paths. Included are a wide ranging set of programs beginning with pre-school education, progressing through efforts to retain students in technical paths in grades K-12 and undergraduate education, and ending with encouraging graduate education. The Materials R & D - Student Internshipsmore » is a unique approach in the latter category. Here, we have focused on a particular area of applied materials research, the Advanced Industrial Concepts Materials Program. Our goal, then, is to educate minority graduate students in the context of this program. The Ames Laboratory was selected as a site for this pilot project since it is a DOE national laboratory, located on the campus of a major research university, which includes in its research interests programs with a strong technological flavor.« less

Novel Dissimilar Joints Between Alloy 800H and 2.25%Cr and 1%Mo Steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

DebRoy, Tarasankar

Dissimilar metal joints between ferritic steels and nickel base alloys are currently fabricated using conventional arc welding processes with selected filler metal combinations. The dissimilar metal joints contain abrupt changes in composition over a relatively small distance. Many years of service at elevated temperatures has shown that these welds are susceptible to creep and creep fatigue failures. The primary mechanism for these creep failures involves carbon diffusion from the ferritic steel to the nickel base alloy. As a result, a carbon depleted zone is created that contains very few stable carbides. This work used additive manufacturing (AM) technologies as amore » highly controllable means for reducing carbon migration through theoretically designed, compositionally graded transition joints guided by appropriate thermodynamic, kinetic and heat transfer and fluid flow modeling. The contents of the report include the objectives and tasks set forth by the PI and collaborators, major technical accomplishments throughout the research and additional details in the form of technical publications resulting from the NEUP grant and reports from the collaborating university and national laboratory.« less

B-70 Aircraft Study. Volume 2

NASA Technical Reports Server (NTRS)

1972-01-01

Volume 2 of the final report on the B-70 aircraft study is presented here. The B-70 Program, at the onset, was a full weapon system capable of sustained Mach 3 flight for the major portion of its design missions. The weapon system was to enter the SAC inventory as an RS-70 with the first intercontinental resonnaissance/bomber wing scheduled to go operational in July, 1964. After several redirections, a two XB-70 air vehicle program emerged with its prime objective being to demonstrate the technical feasibility of sustained Mach 3 flight. This section describes the original Weapon System 110A concepts, the evolution of the RS-70 design, and the XB-70 air vehicles which demonstrated the design, fabrication, and technical feasibility of long range Mach 3 flights at high altitude. The data presented shows that a very large step forward in the state-of-the-art of manned aircraft design was achieved during the B-70 development program and that advances were made and incorporated in every area, including design, materials application, and manufacturing techniques.

Tank characterization report for single-shell tank 241-S-111

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conner, J.M.

1997-04-28

One of the major functions of the Tank Waste Remediation System (TWRS) is to characterize wastes in support of waste management and disposal activities at the Hanford Site. Analytical data from sampling and analysis, along with other available information about a tank, are compiled and maintained in a tank characterization report (TCR). This report and its appendices serve as the TCR for single-shell tank 241-S-111. The objectives of this report are: (1) to use characterization data to address technical issues associated with tank 241-S-111 waste; and (2) to provide a standard characterization of this waste in terms of a best-basismore » inventory estimate. The response to technical issues is summarized in Section 2.0, and the best-basis inventory estimate is presented in Section 3.0. Recommendations regarding safety status and additional sampling needs are provided in Section 4.0. Supporting data and information are contained in the appendices. This report also supports the requirements of Hanford Federal Facility Agreement and Consent Order (Ecology et al. 1996) milestone M-44-10.« less

[Overall design and proof-test of an integrated environmental control and life support system (ECLSS) for demonstration and verification].

PubMed

Rui, Jia-bai; Zheng, Chuan-xian; Zeng, Qing-tang

2002-12-01

Objective. To test and demonstrate embryonic form of our future space station ECLSS, which will also form an advanced research and test ground facility. Method. The following functions of the system were tested and demonstrated: integrated solid amine CO2 collection and concentration, Sabatier CO2 reduction, urine processing thermoelectric integrated membrane evaporation, solid polymer water electrolysis O2 generation, concentrated ventilation, temperature and humidity control, the measurement and control system, and other non-regenerative techniques. All of these were demonstrated in a sealed adiabatic module, and passed the proof-tests. Result. The principal technical requirements of the system and each regenerative subsystem were met. The integration of system general and each subsystem was successful, and the partial closed loop of the system's integration has been realized basically. Conclusion. The reasonableness of the project design was verified, and the major system technical requirements were satisfied. The suitability and harmonization among system general and each subsystem were good, the system operated normally, and the parameters measured were correct.

Application of dexterous space robotics technology to myoelectric prostheses

NASA Astrophysics Data System (ADS)

Hess, Clifford; Li, Larry C. H.; Farry, Kristin A.; Walker, Ian D.

1994-02-01

Future space missions will require robots equipped with highly dexterous robotic hands to perform a variety of tasks. A major technical challenge in making this possible is an improvement in the way these dexterous robotic hands are remotely controlled or teleoperated. NASA is currently investigating the feasibility of using myoelectric signals to teleoperate a dexterous robotic hand. In theory, myoelectric control of robotic hands will require little or no mechanical parts and will greatly reduce the bulk and weight usually found in dexterous robotic hand control devices. An improvement in myoelectric control of multifinger hands will also benefit prosthetics users. Therefore, as an effort to transfer dexterous space robotics technology to prosthetics applications and to benefit from existing myoelectric technology, NASA is collaborating with the Limbs of Love Foundation, the Institute for Rehabilitation and Research, and Rice University in developing improved myoelectric control multifinger hands and prostheses. In this paper, we will address the objectives and approaches of this collaborative effort and discuss the technical issues associated with myoelectric control of multifinger hands. We will also report our current progress and discuss plans for future work.

Application of dexterous space robotics technology to myoelectric prostheses

NASA Technical Reports Server (NTRS)

Hess, Clifford; Li, Larry C. H.; Farry, Kristin A.; Walker, Ian D.

1994-01-01

Future space missions will require robots equipped with highly dexterous robotic hands to perform a variety of tasks. A major technical challenge in making this possible is an improvement in the way these dexterous robotic hands are remotely controlled or teleoperated. NASA is currently investigating the feasibility of using myoelectric signals to teleoperate a dexterous robotic hand. In theory, myoelectric control of robotic hands will require little or no mechanical parts and will greatly reduce the bulk and weight usually found in dexterous robotic hand control devices. An improvement in myoelectric control of multifinger hands will also benefit prosthetics users. Therefore, as an effort to transfer dexterous space robotics technology to prosthetics applications and to benefit from existing myoelectric technology, NASA is collaborating with the Limbs of Love Foundation, the Institute for Rehabilitation and Research, and Rice University in developing improved myoelectric control multifinger hands and prostheses. In this paper, we will address the objectives and approaches of this collaborative effort and discuss the technical issues associated with myoelectric control of multifinger hands. We will also report our current progress and discuss plans for future work.

Urban Rail Supporting Technology Program Fiscal Year 1974 Year End Summary

DOT National Transportation Integrated Search

1975-03-01

Major areas include program management, technical support and application engineering, facilities development, test and evaluation, and technology development. Specific technical discussion includes track measurement systems; UMTA facilities developm...

15 CFR 1180.8 - Appointment of Agency Liaison Officers.

Code of Federal Regulations, 2014 CFR

2014-01-01

... SCIENTIFIC, TECHNICAL AND ENGINEERING INFORMATION TO THE NATIONAL TECHNICAL INFORMATION SERVICE § 1180.8... instruments); (3) Appoint additional liaison officers for major units or components of an agency if the...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cazzato, Roberto Luigi, E-mail: gigicazzato@hotmail.it; Garnon, Julien; Department of Interventional Radiology, Nouvel Hôpital Civil

ObjectivesThe purpose of this study is to discuss technical aspects and rationales of magnetic resonance (MR)-guided cryoablation (CA) of Morton’s neuroma (MN); preliminary clinical experience is also retrospectively reviewed.MethodsProcedures were performed under local anaesthesia on an outpatient basis. Lesion size and location, procedural (technical success, procedural time, complications) and clinical outcomes (patient satisfaction according to a four-point scale, residual pain according to a 0–10 visual analogue scale and instances of “stump neuroma”) were assessed via chart review and cross-sectional telephone survey after the 20th case.ResultsTwenty patients (15 female, 5 male; mean age 50.3 years) were included; 24 MN (mean size 12.7 mm)more » were treated. Technical success was 100 %. Mean procedural time was 40.9 ± 10.4 min (range 35–60). One minor complication (superficial cellulitis) was reported (4.2 %). Follow-up (mean 19.7 months) was available for 18/24 MN. Patient satisfaction on a per-lesion basis was as follows: “completely satisfied” in 77.7 %, “satisfied with minor reservations” in 16.6 % and “satisfied with major reservations” in 5.7 % of cases. Mean pain score at last follow-up post-CA was 3.0. No instances of “stump neuroma” were reported.ConclusionsMR-guided CA of MN is a novel therapy which appears technically feasible. Clinical advantages of the procedure are high patient satisfaction, reduced risk of “stump neuroma” syndrome and good patient tolerance on an outpatient basis. Further, prospective studies are needed to confirm these encouraging results.« less

Objective structured assessment of technical skills evaluation of theoretical compared with hands-on training of shoulder dystocia management: a randomized controlled trial.

PubMed

Buerkle, Bernd; Pueth, Julia; Hefler, Lukas A; Tempfer-Bentz, Eva-Katrin; Tempfer, Clemens B

2012-10-01

To compare the skills of performing a shoulder dystocia management algorithm after hands-on training compared with demonstration. We randomized medical students to a 30-minute hands-on (group 1) and a 30-minute demonstration (group 2) training session teaching a standardized shoulder dystocia management scheme on a pelvic training model. Participants were tested with a 22-item Objective Structured Assessment of Technical Skills scoring system after training and 72 hours thereafter. Objective Structured Assessment of Technical Skills scores were the primary outcome. Performance time, self-assessment, confidence, and global rating scale were the secondary outcomes. Statistics were performed using Mann-Whitney U test, χ test, and multiple linear regression analysis. Two hundred three participants were randomized. Objective Structured Assessment of Technical Skills scores were significantly higher in group 1 (n=103) compared with group 2 (n=100) (17.95±3.14 compared with 15.67±3.18, respectively; P<.001). The secondary outcomes global rating scale (GRS; 10.94±2.71 compared with 8.57±2.61, respectively; P<.001), self-assessment (3.15±0.94 compared with 2.72±1.01; P=.002), and confidence (3.72±0.98 compared with 3.34±0.90, respectively; P=.005), but not performance time (3:19±0:48 minutes compared with 3:31±1:05 minutes; P=.1), were also significantly different, favoring group 1. After 72 hours, Objective Structured Assessment of Technical Skills scores were still significantly higher in group 1 (n=67) compared with group 2 (n=60) (18.17±2.76 compared with 14.98±3.03, respectively; P<.001) as were GRS (10.80±2.62 compared with 8.15±2.59; P<.001) and self assessment (SA; 3.44±0.87 compared with 2.95±0.94; P=.003). In a multiple linear regression analysis, group assignment (group 1 compared with 2; P<.001) and sex (P=.002) independently influenced Objective Structured Assessment of Technical Skills scores. Hands-on training helps to achieve a significant improvement of shoulder dystocia management on a pelvic training model. www.ClinicalTrials.gov, NCT01618565. I.

Audit Report on "Work for Others Performed by the Department of Energy for the Department of Defense"

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Pursuant to the Atomic Energy Act of 1954, as amended, and the Economy Act of 1932, the Department of Energy and its semi-autonomous National Nuclear Security Administration (NNSA) provide research and technical assistance to other Federal agencies on a reimbursable, full cost recovery basis through the Work for Others (WFO) program. For the vast majority of WFO technical projects, Department Federal officials furnish administrative project oversight while the actual detailed scientific or technical work is completed by the Department's 'management and operating' contractors. These contractors are awarded a special contract type specifically created under the Federal Acquisition Regulation to managemore » and operate Department sites and facilities, including sophisticated laboratories and technical centers, on a government-owned, contractor-operated basis. With annual expenditures exceeding $1 billion, the Department of Defense (DoD) is one of the Department's largest WFO customers. Work performed for DoD at the Department's national laboratories and other facilities includes highly technical research in areas such as nuclear weapons systems, counter-terrorism, and in-theater troop support. The National Defense Authorization Act for Fiscal Year (FY) 2009, required the Inspectors General of the DoD and the Department to review procurement methods to determine whether the Department complied with DoD procurement requirements and/or whether alternative procurement policies were in place. In response, we focused our review on projects performed by NNSA because it completes the vast majority (approximately $900 million in FY 2008) of the Department's work for DoD. As part of this effort, and, at the specific request of the DoD Office of Inspector General (DoD OIG), we identified the universe of WFO technical projects that received new funding in the fourth quarter of FY 2008 at NNSA sites. We independently reviewed a judgmental sample of 11 projects selected by the DoD OIG to meet the objectives of this audit. Our review revealed that NNSA managed DoD WFO technical projects in a manner consistent with requirements of the Atomic Energy Act of 1954, the Federal Acquisition Regulation, and the Department's implementing guidance, the Department of Energy Acquisition Regulation. Because of the very nature of the Department's management and operating contracting model, WFO projects may not be technically compliant with DoD procurement regulations in certain instances. We found that NNSA did not let new contracts or task orders for the DoD WFO technical projects we reviewed and instead managed them under its existing internal control process as part of its management and operating contract structure. In one instance, we noted that the Department had, at DoD's request, supplemented its control structure to incorporate specific DoD procurement requirements. Senior Department of Energy procurement officials acknowledged that neither the Department nor NNSA modified their existing prime contracts to incorporate specific defense procurement requirements because such modifications would be inappropriate, costly, and inefficient. In short, they informed us that the Department had developed and implemented a series of controls designed to monitor overall contractor performance, including WFO technical projects. Department and NNSA officials noted, however, that they were willing to incorporate DoD specific requirements into work orders should DoD request and fund such efforts. Additional details regarding management of WFO technical projects are discussed in the body of this report.« less

Transportation planning effectiveness: twenty case studies

DOT National Transportation Integrated Search

1977-12-31

This document consists of 20 site-specific case studies of urban area experience with the Technical Study Grant Program of the Urban Mass Transportation Administration (UMTA). The objective of the case studies is to determine how the Technical Study ...

A Service Learning Structural Engineering Capstone Course and the Assessment of Technical and Non-Technical Objectives

ERIC Educational Resources Information Center

Dinehart, David W.; Gross, Shawn P.

2010-01-01

The primary role of a civil engineer is to serve the community; thus, it is essential that students understand the impact of engineering projects on, and the context of engineering projects within, society. One goal of an engineering capstone design course should be to mesh the technical knowledge of the discipline with an encompassing engineering…

How Should "Quality" Technical Education and Training Be Defined? A Statement from the National Council for Occupational Education.

ERIC Educational Resources Information Center

Everett, James; Gershwin, Mary; Hayes, Homer; Jacobs, James; Mundhenk, Robert

Although objectively measurable achievement of outcomes is an important guide to the quality of education, the process of defining and assuring the quality of technical education and training must include consideration for the context in which technical education and training occurs. It is also critical to remember that education has two sets of…

Improved Understanding of In Situ Chemical Oxidation. Technical Objective I: Contaminant Oxidation Kinetics Contaminant Oxidation Kinetics

DTIC Science & Technology

2009-05-01

methyl tert butyl ether NAPL non-aqueous phase liquid NOD natural oxidant demand •OH hydroxide radical Ox oxidant O3 ozone PCE...and persulfate; and Technical Objective 2, assess how soil properties (e.g., soil mineralogy , natural carbon content) affect oxidant mobility and...to develop a general description of kobs vs. T because there are many reactions that can contribute to the concentration of the reactive intermediate

The Role of Fixation and Visual Attention in Object Recognition.

DTIC Science & Technology

1995-01-01

computers", Technical Report, Aritificial Intelligence Lab, M.I. T., AI-Memo-915, June 1986. [29] D.P. Huttenlocher and S.Ullman, "Object Recognition Using...attention", Technical Report, Aritificial Intelligence Lab, M.I. T., AI-memo-770, Jan 1984. [35] E.Krotkov, K. Henriksen and R. Kories, "Stereo...MIT Artificial Intelligence Laboratory [ PCTBTBimON STATEMENT X \\ Afipioved tor puciic reieo*«* \\ »?*•;.., jDi*tiibutK» U»lisut»d* 19951004

Patterns of technical error among surgical malpractice claims: an analysis of strategies to prevent injury to surgical patients.

PubMed

Regenbogen, Scott E; Greenberg, Caprice C; Studdert, David M; Lipsitz, Stuart R; Zinner, Michael J; Gawande, Atul A

2007-11-01

To identify the most prevalent patterns of technical errors in surgery, and evaluate commonly recommended interventions in light of these patterns. The majority of surgical adverse events involve technical errors, but little is known about the nature and causes of these events. We examined characteristics of technical errors and common contributing factors among closed surgical malpractice claims. Surgeon reviewers analyzed 444 randomly sampled surgical malpractice claims from four liability insurers. Among 258 claims in which injuries due to error were detected, 52% (n = 133) involved technical errors. These technical errors were further analyzed with a structured review instrument designed by qualitative content analysis. Forty-nine percent of the technical errors caused permanent disability; an additional 16% resulted in death. Two-thirds (65%) of the technical errors were linked to manual error, 9% to errors in judgment, and 26% to both manual and judgment error. A minority of technical errors involved advanced procedures requiring special training ("index operations"; 16%), surgeons inexperienced with the task (14%), or poorly supervised residents (9%). The majority involved experienced surgeons (73%), and occurred in routine, rather than index, operations (84%). Patient-related complexities-including emergencies, difficult or unexpected anatomy, and previous surgery-contributed to 61% of technical errors, and technology or systems failures contributed to 21%. Most technical errors occur in routine operations with experienced surgeons, under conditions of increased patient complexity or systems failure. Commonly recommended interventions, including restricting high-complexity operations to experienced surgeons, additional training for inexperienced surgeons, and stricter supervision of trainees, are likely to address only a minority of technical errors. Surgical safety research should instead focus on improving decision-making and performance in routine operations for complex patients and circumstances.

Development of requirements on safety cases of machine industry products for power engineering

NASA Astrophysics Data System (ADS)

Aronson, K. E.; Brezgin, V. I.; Brodov, Yu. M.; Gorodnova, N. V.; Kultyshev, A. Yu.; Tolmachev, V. V.; Shablova, E. G.

2016-12-01

This article considers security assurance for power engineering machinery in the design and production phases. The Federal Law "On Technical Regulation" and the Customs Union Technical Regulations "On Safety of Machinery and Equipment" are analyzed in the legal, technical, and economic aspect with regard to power engineering machine industry products. From the legal standpoint, it is noted that the practical enforcement of most norms of the Law "On Technical Regulation" makes it necessary to adopt subordinate statutory instruments currently unavailable; moreover, the current level of adoption of technical regulations leaves much to be desired. The intensive integration processes observed in the Eurasian Region in recent years have made it a more pressing task to harmonize the laws of the region's countries, including their technical regulation framework. The technical aspect of analyzing the technical regulation of the Customs Union has been appraised by the IDEF0 functional modeling method. The object of research is a steam turbine plant produced at the turbine works. When developing the described model, we considered the elaboration of safety case (SC) requirements from the standpoint of the chief designer of the turbine works as the person generally responsible for the elaboration of the SC document. The economic context relies on risk analysis and appraisal methods. In their respect, these are determined by the purposes and objectives of analysis, complexity of considered objects, availability of required data, and expertise of specialists hired to conduct the analysis. The article proposes the description of all sources of hazard and scenarios of their actualization in all production phases of machinery life cycle for safety assurance purposes. The detection of risks and hazards allows forming the list of unwanted events. It describes the sources of hazard, various risk factors, conditions for their rise and development, tentative risk appraisals, and elaboration of tentative guidelines for reducing hazard and risk levels.

Technical Writing: Library Resources for Engineers. A Self-Paced Workbook for the University of Arkansas Libraries. Revised.

ERIC Educational Resources Information Center

Dew, Stephen H.

This self-paced library workbook is a course requirement of all "technical writing" freshman English classes at the University of Arkansas. The technical writing course is required of all engineering students, and its major focus is on writing a term paper containing a bibliography produced through library research. The workbook…

Use of Career Education and Occupation Information Services in Boosting Enrolment into Vocational and Technical Education Programs in Nigeria

ERIC Educational Resources Information Center

Igbinedion, V. I.; Ojeaga, I. J.

2012-01-01

The major thrust of technical and vocational education (TVE) worldwide is to address issues of youth unemployment, poverty and international competitiveness in skills development towards current and projected opportunities and challenges. The paper posits that despite the evidence of numerous reforms in vocational and technical education programs…

Flow of Scientific and Technical Information: The Results of a Recent Major Investigation.

ERIC Educational Resources Information Center

Goodman, A. F.

Characterized were the scientific and technical information needs of 1,500 scientists and engineers from 73 companies, 8 research institutes, and 2 universities; and the flow of scientific and technical information (flow process) inherent in satisfying these needs. Interviewers asked 63 questions in the subject areas of (1) the user of scientific…

Teaching Intercultural Communication in a Basic Technical Writing Course: A Survey of Our Current Practices and Methods

ERIC Educational Resources Information Center

Matveeva, Natalia

2008-01-01

This research article reports the results of an online survey distributed among technical writing instructors in 2006. The survey aimed to examine how we teach intercultural communication in basic technical writing courses: our current practices and methods. The article discusses three major challenges that instructors may face when teaching about…

Scope and Challenges of Technical Education: A Kerala Perspective

ERIC Educational Resources Information Center

Rahman, M. Abdul; Unnikrishnan, Ramesh

2015-01-01

Technical education contributes a major share to the overall education system and plays a vital role in the social and economic development of our nation. Since independence, the technical education system in our country has grown into a fairly large-sized system, offering opportunities for education and training in a wide variety of trades and…

Development, Technical, and User Evaluation of a Web Mobile Application for Self-Control of Diabetes.

PubMed

Garcia-Zapirain, Begoña; de la Torre Díez, Isabel; Sainz de Abajo, Beatriz; López-Coronado, Miguel

2016-09-01

The main objective of this research was to develop and evaluate a Web-based mobile application (app) known as "Diario Diabetes" on both a technical and user level, by means of which individuals with diabetes may monitor their illness easily at any time and in any place using any device that has Internet access. The technologies used to develop the app were HTML, CSS, JavaScript, PHP, and MySQL, all of which are an open source. Once the app was developed, it was evaluated on a technical level (by measuring loading times) and on a user level, through a survey. Different loading times for the application were measured, with it being noted that under no circumstances does this exceed 2 s. Usability was evaluated by 150 users who initially used the application. A majority (71%) of users used a PC to access the app, 83% considered the app's design to be attractive, 67% considered the tasks to be very useful, and 67% found it very easy to use. Although applications exist for controlling diabetes both at mobile virtual shops or on a research level, our app may help to improve the administration of these types of patients and they are the ones who will ultimately opt for one or the other. According to the results obtained, we can state that all users would recommend the app's use to other users.

Randomized clinical trial to evaluate mental practice in enhancing advanced laparoscopic surgical performance.

PubMed

Louridas, M; Bonrath, E M; Sinclair, D A; Dedy, N J; Grantcharov, T P

2015-01-01

Mental practice, the cognitive rehearsal of a task without physical movement, is known to enhance performance in sports and music. Investigation of this technique in surgery has been limited to basic operations. The purpose of this study was to develop mental practice scripts, and to assess their effect on advanced laparoscopic skills and surgeon stress levels in a crisis scenario. Twenty senior surgical trainees were randomized to either conventional training or mental practice groups, the latter being trained by an expert performance psychologist. Participants' skills were assessed while performing a porcine laparoscopic jejunojejunostomy as part of a crisis scenario in a simulated operating room, using the Objective Structured Assessment of Technical Skill (OSATS) and bariatric OSATS (BOSATS) instruments. Objective and subjective stress parameters were measured, as well as non-technical skills using the Non-Technical Skills for Surgeons rating tool. An improvement in OSATS (P = 0.003) and BOSATS (P = 0.003) scores was seen in the mental practice group compared with the conventional training group. Seven of ten trainees improved their technical performance during the crisis scenario, whereas four of the ten conventionally trained participants deteriorated. Mental imagery ability improved significantly following mental practice training (P = 0.011), but not in the conventional group (P = 0.083). No differences in objective or subjective stress levels or non-technical skills were evident. Mental practice improves technical performance for advanced laparoscopic tasks in the simulated operating room, and allows trainees to maintain or improve their performance despite added stress. © 2014 BJS Society Ltd. Published by John Wiley & Sons Ltd.

The technical editing internship: What makes it work

DOE Office of Scientific and Technical Information (OSTI.GOV)

Caruthers, C.M.; Caruthers, L.E.; Schmidt, B.J.

1988-01-01

The following paper presents the experiences and perceptions of the three main participants of a technical editing internship at Argonne National Laboratory during the summer of 1986. Linda Caruthers, Clifford Caruthers, and Bryan Schmidt/emdash/teacher, supervisor, and intern, respectively/emdash/share what they received as their roles and responsibilities in guiding, managing, and becoming an entry-level technical editor. The following discussions demonstrate how the efforts of three people pursuing different objectives achieve the primary goal of all technical writers and editors: high-quality publications.

Strategic Control Algorithm Development : Volume 2A. Technical Report.

DOT National Transportation Integrated Search

1974-08-01

The technical report presents a detailed description of the strategic control functional objectives, followed by a presentation of the basic strategic control algorithm and how it evolved. Contained in this discussion are results of analyses that con...

Strategic Control Algorithm Development : Volume 2B. Technical Report (Concluded)

DOT National Transportation Integrated Search

1974-08-01

The technical report presents a detailed description of the strategic control functional objectives, followed by a presentation of the basic strategic control algorithm and how it evolved. Contained in this discussion are the results of analyses that...

7 CFR 3401.17 - Review criteria.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Regulations of the Department of Agriculture (Continued) COOPERATIVE STATE RESEARCH, EDUCATION, AND EXTENSION.... Overall scientific and technical quality of proposal 10 2. Scientific and technical quality of the.... Feasibility of attaining objectives; adequacy of professional training and experience, facilities and...

Commercial Building Tenant Energy Usage Data Aggregation and Privacy: Technical Appendix

DOE Office of Scientific and Technical Information (OSTI.GOV)

Livingston, Olga V.; Pulsipher, Trenton C.; Anderson, David M.

2014-11-12

This technical appendix accompanies report PNNL–23786 “Commercial Building Tenant Energy Usage Data Aggregation and Privacy”. The objective is to provide background information on the methods utilized in the statistical analysis of the aggregation thresholds.

Integrated Measurement of Crew Resource Management and Technical Flying Skills

DOT National Transportation Integrated Search

1993-08-01

This report presents the findings of a study designed with two objectives: to produce a prototype performance : measurement instrument (PMI) that integrates the assessment of Crew Resource Management (CRM) and technical flying : skills and to investi...

7 CFR 610.32 - Technical assistance furnished.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE CONSERVATION OPERATIONS TECHNICAL ASSISTANCE Conservation of Private Grazing Land... managers to plan and implement resource conservation on grazing land. The objective of planning on grazing...

7 CFR 610.32 - Technical assistance furnished.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE CONSERVATION OPERATIONS TECHNICAL ASSISTANCE Conservation of Private Grazing Land... managers to plan and implement resource conservation on grazing land. The objective of planning on grazing...

7 CFR 610.32 - Technical assistance furnished.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE CONSERVATION OPERATIONS TECHNICAL ASSISTANCE Conservation of Private Grazing Land... managers to plan and implement resource conservation on grazing land. The objective of planning on grazing...

7 CFR 610.32 - Technical assistance furnished.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE CONSERVATION OPERATIONS TECHNICAL ASSISTANCE Conservation of Private Grazing Land... managers to plan and implement resource conservation on grazing land. The objective of planning on grazing...

7 CFR 610.32 - Technical assistance furnished.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE CONSERVATION OPERATIONS TECHNICAL ASSISTANCE Conservation of Private Grazing Land... managers to plan and implement resource conservation on grazing land. The objective of planning on grazing...

Independent technical review, handbook

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Purpose Provide an independent engineering review of the major projects being funded by the Department of Energy, Office of Environmental Restoration and Waste Management. The independent engineering review will address questions of whether the engineering practice is sufficiently developed to a point where a major project can be executed without significant technical problems. The independent review will focus on questions related to: (1) Adequacy of development of the technical base of understanding; (2) Status of development and availability of technology among the various alternatives; (3) Status and availability of the industrial infrastructure to support project design, equipment fabrication, facility construction,more » and process and program/project operation; (4) Adequacy of the design effort to provide a sound foundation to support execution of project; (5) Ability of the organization to fully integrate the system, and direct, manage, and control the execution of a complex major project.« less

Analysis of the Parameters Required for Performance Monitoring and Assessment of Military Communications Systems by Military Technical Controller

DTIC Science & Technology

1975-12-01

139 APPENDIX A* BASIC CONCEPT OF MILITARY TECHNICAL CONTROL.142 6 APIENDIX Es TEST EQUIPMENI REQUIRED FOR lEASURF.4ENr OF 1AF’AMETE RS...Control ( SATEC ) Automatic Facilities heport Army Automated Quality Monitoring Reporting System (AQMPS) Army Autcmated Technical Control-Semi (ATC-Semi...technical control then beco.. es equipment status monitoring. All the major equipment in a system wculd have internal sensors with properly selected parameters

Costs and Returns for Investments in Technical Schooling by a Group of North Carolina High School Graduates. Economics Research Report No. 5

ERIC Educational Resources Information Center

Carroll, Adger B.; Ihnen, Loren A.

Personal, educational, employment, and earnings data were collected from 45 matched pairs, each pair consisting of a Gaston Technical Institute graduate and a high school classmate who did not engage in post secondary education. The objective of the study was to estimate the functional relationship between 2 years of technical schooling and the…

Environmental Hazards Assessment Program. Quarterly report, January 1994--March 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-05-04

The objectives of the EHAP program are to: Develop a holistic, national basis for risk assessment, risk management and risk communication; Develop a pool of talented scientists and experts in cleanup activities, especially in human health aspects, and; Identify needs and develop programs addressing the critical shortage of well-educated, highly-skilled technical and scientific personnel to address the health oriented aspects of environmental restoration and waste management. This report describes activities and reports on progress for the third quarter of year two (January-March, 1994) of the grant. To better accomplish objectives, grant efforts are organized into three major elements: The Crossroadsmore » of Humanity Series; Research, Science and Education Programs; and Program Management. The Crossroads of Humanity Series charted a new course, incorporating lessons learned during previous quarters into a series of programs designed to address environmental issues in a real world setting. Reports are included on the various research programs with milestones and deliverables from the third quarter.« less

The Orbital Debris Problem and the Challenges for Environment Remediation

NASA Technical Reports Server (NTRS)

Liou, J.-C.

2014-01-01

LEO debris population will continue to increase even with a good implementation of the commonly-adopted mitigation measures. The root-cause of the increase is catastrophic collisions involving large/massive intact objects (rocket bodies or spacecraft). The major mission-ending risks for most operational spacecraft, however, come from impacts with debris just above the threshold of the protection shields (5-mm to 1-cm). A solution-driven approach is to seek: Concepts for removal of massive intacts with high P(collision); Concepts capable of preventing collisions involving intacts; Concepts for removal of 5-mm to 1-cm debris; Enhanced impact protection shields for valuable space assets. Key questions for remediation consideration of orbital debris: What is the acceptable threat level? What are the mission objectives? What is the appropriate roadmap/timeframe for remediation? Support advanced technology development when an economically viable approach is identified. Address non-technical issues, such as policy, coordination, ownership, legal, and liability at the national and international levels.

Research and Technology Objectives and Plans Summary (RTOPS)

NASA Technical Reports Server (NTRS)

1990-01-01

The NASA research and technology program for FY 1990 is presented. The summary portions is compiled of each of the RTOPs (Research and Technology Objectives and Plans) used for management review and control of research currently in progress throughout NASA. The RTOP summary is designed to facilitate communication and coordination among concerned technical personnel in government, industry, and universities. The first section containing citations and abstracts of the RTOPs is followed by four indices: Subject; Technical Monitor; Responsible NASA Organization; and RTOP number.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wester, W., editor

Fermilab is executing Laboratory Directed Research and Development (LDRD) as outlined by order DOE O 413.2B in order to enhance and realize the mission of the laboratory in a manner that also supports the laboratory’s strategic objectives and the mission of the Department of Energy. LDRD funds enable scientific creativity, allow for exploration of “high risk, high payoff” research, and allow for the demonstration of new ideas, technical concepts, and devices. LDRD also has an objective of maintaining and enhancing the scientific and technical vitality of Fermilab.

Recognizing 3 D Objects from 2D Images Using Structural Knowledge Base of Genetic Views

DTIC Science & Technology

1988-08-31

technical report. [BIE85] I. Biederman , "Human image understanding: Recent research and a theory", Computer Vision, Graphics, and Image Processing, vol...model bases", Technical Report 87-85, COINS Dept, University of Massachusetts, Amherst, MA 01003, August 1987 . [BUR87b) Burns, J. B. and L. J. Kitchen...34Recognition in 2D images of 3D objects from large model bases using prediction hierarchies", Proc. IJCAI-10, 1987 . [BUR891 J. B. Burns, forthcoming

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

It has been five years since the last in-depth American College of Nuclear Physicians/Society of Nuclear Medicine Symposium on the subject of single photon emission computed tomography (SPECT) was held. Because this subject was nominated as the single most desired topic we have selected SPECT imaging as the basis for this year's program. The objectives of this symposium are to survey the progress of SPECT clinical applications that have taken place over the last five years and to provide practical and timely guidelines to users of SPECT so that this exciting imaging modality can be fully integrated into the evaluationmore » of pathologic processes. The first half was devoted to a consideration of technical factors important in SPECT acquisition and the second half was devoted to those organ systems about which sufficient clinical SPECT imaging data are available. With respect to the technical aspect of the program we have selected the key areas which demand awareness and attention in order to make SPECT operational in clinical practice. These include selection of equipment, details of uniformity correction, utilization of phantoms for equipment acceptance and quality assurance, the major aspect of algorithms, an understanding of filtered back projection and appropriate choice of filters and an awareness of the most commonly generated artifacts and how to recognize them. With respect to the acquisition and interpretation of organ images, the faculty will present information on the major aspects of hepatic, brain, cardiac, skeletal, and immunologic imaging techniques. Individual papers are processed separately for the data base. (TEM)« less

Training Manuals and Technical Publications.

ERIC Educational Resources Information Center

Army Test and Evaluation Command, Aberdeen Proving Ground, MD.

The objective of the Materiel Test Procedure is to describe methods for determining the need for adequacy of comprehensiveness, and clarity of training manuals and technical publications (or other pertinent types of literature) relating to the ammunition or ammunition components being tested. (Author)

Handbook of sensor technical characteristics

NASA Astrophysics Data System (ADS)

Tanner, S.

1982-07-01

Space and terrestrial applications remote sensor systems are described. Each sensor is presented separately. Information is included on its objectives, description, technical characteristics, data products obtained, data archives location, period of operation, and measurement and potential derived parameters. Each sensor is cross indexed.

Handbook of sensor technical characteristics

NASA Technical Reports Server (NTRS)

Tanner, S.

1982-01-01

Space and terrestrial applications remote sensor systems are described. Each sensor is presented separately. Information is included on its objectives, description, technical characteristics, data products obtained, data archives location, period of operation, and measurement and potential derived parameters. Each sensor is cross indexed.

Utah's 1988-93 Vocational-Technical Education Master Plan: A Powerful Resource for Human and Economic Development.

ERIC Educational Resources Information Center

Utah State Board of Higher Education, Salt Lake City.

For Utah residents to remain in the forefront or even stay competitive economically, the state's work force must acquire the knowledge and skills that match or exceed those of their most technically advanced competitors. A powerful engine for economic growth is a high-quality system of vocational-technical education. The majority of Utah public…

A Report by the Governor's Task Force on Vocational and Technical Education.

ERIC Educational Resources Information Center

Governor's Task Force on Vocational and Technical Education, Columbus, OH.

On July 19, 1968, a Task Force on Vocational and Technical Education was created by the governor of Ohio to develop proposals for organization, financing, and legislation. Some major problems to which the Task Force gave attention were: (1) the serious gap between the need for and the availability of vocational and technical education, (2) the…

The Technology of Technology Transfer. The Case of the Japan-Singapore Technical Institute. Discussion Paper No. 93.

ERIC Educational Resources Information Center

Araujo e Oliveira, Joao Batista; Pillay, Gerald F.

The new economic and industrial policies of the 1980s called for a major restructuring of the industrial profile of Singapore. The government decided to set up three new technical institutes to prepare and supply skilled workers to new investors: French-, German-, and Japan-Singapore Technical Institutes with the collaboration of the government…

Women and Feminism in Technical Communication: A Qualitative Content Analysis of Journal Articles Published in 1989 through 1997.

ERIC Educational Resources Information Center

Thompson, Isabelle

1999-01-01

Identifies 40 articles about women and feminism published in five technical communication journals in a period of nine years. Notes major themes, all concerning inclusion. Concludes that although research about women and feminism has been accepted as part of the scholarly purview of technical communication, the ways in which this research has…

Prototyping a Sensor Enabled 3d Citymodel on Geospatial Managed Objects

NASA Astrophysics Data System (ADS)

Kjems, E.; Kolář, J.

2013-09-01

One of the major development efforts within the GI Science domain are pointing at sensor based information and the usage of real time information coming from geographic referenced features in general. At the same time 3D City models are mostly justified as being objects for visualization purposes rather than constituting the foundation of a geographic data representation of the world. The combination of 3D city models and real time information based systems though can provide a whole new setup for data fusion within an urban environment and provide time critical information preserving our limited resources in the most sustainable way. Using 3D models with consistent object definitions give us the possibility to avoid troublesome abstractions of reality, and design even complex urban systems fusing information from various sources of data. These systems are difficult to design with the traditional software development approach based on major software packages and traditional data exchange. The data stream is varying from urban domain to urban domain and from system to system why it is almost impossible to design a complete system taking care of all thinkable instances now and in the future within one constraint software design complex. On several occasions we have been advocating for a new end advanced formulation of real world features using the concept of Geospatial Managed Objects (GMO). This paper presents the outcome of the InfraWorld project, a 4 million Euro project financed primarily by the Norwegian Research Council where the concept of GMO's have been applied in various situations on various running platforms of an urban system. The paper will be focusing on user experiences and interfaces rather then core technical and developmental issues. The project was primarily focusing on prototyping rather than realistic implementations although the results concerning applicability are quite clear.

10 CFR 63.113 - Performance objectives for the geologic repository after permanent closure.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Performance objectives for the geologic repository after...-LEVEL RADIOACTIVE WASTES IN A GEOLOGIC REPOSITORY AT YUCCA MOUNTAIN, NEVADA Technical Criteria Postclosure Performance Objectives § 63.113 Performance objectives for the geologic repository after permanent...

Professional Development Policies and Programs.

ERIC Educational Resources Information Center

Department of the Interior, Washington, DC.

This memorandum sets forth policies, objectives, plans and programs for providing opportunities to professional staff for development of their technical and managerial skills. Section titles are: Policy and Objectives; Methods of Achieving Objectives; Cooperative Determination of Training Needs, Professional Development Plan; Agency Financial…

Computer integration of engineering design and production: A national opportunity

NASA Astrophysics Data System (ADS)

1984-10-01

The National Aeronautics and Space Administration (NASA), as a purchaser of a variety of manufactured products, including complex space vehicles and systems, clearly has a stake in the advantages of computer-integrated manufacturing (CIM). Two major NASA objectives are to launch a Manned Space Station by 1992 with a budget of $8 billion, and to be a leader in the development and application of productivity-enhancing technology. At the request of NASA, a National Research Council committee visited five companies that have been leaders in using CIM. Based on these case studies, technical, organizational, and financial issues that influence computer integration are described, guidelines for its implementation in industry are offered, and the use of CIM to manage the space station program is recommended.

Computer integration of engineering design and production: A national opportunity

NASA Technical Reports Server (NTRS)

1984-01-01

The National Aeronautics and Space Administration (NASA), as a purchaser of a variety of manufactured products, including complex space vehicles and systems, clearly has a stake in the advantages of computer-integrated manufacturing (CIM). Two major NASA objectives are to launch a Manned Space Station by 1992 with a budget of $8 billion, and to be a leader in the development and application of productivity-enhancing technology. At the request of NASA, a National Research Council committee visited five companies that have been leaders in using CIM. Based on these case studies, technical, organizational, and financial issues that influence computer integration are described, guidelines for its implementation in industry are offered, and the use of CIM to manage the space station program is recommended.

Progress report to the Arkansas State Highway and Transportation Department, year ending September 30, 1981

USGS Publications Warehouse

Gilstrap, R.C.; Lamb, T.E.

1982-01-01

The objectives of the cooperative program with the Arkansas State Highway and Transportation Department are described. Accomplishments within the program are summarized and reports are listed. The accomplishments include operation of a crest-stage station network, modeling of rainfall-runoff station data, publication of drainage-area reports for all major river basins in Arkansas, floodflow-characteristics reports at proposed bridge sites, furnishing peak-flow and stage information at many sites, and furnishing technical advice and field training to Highway and Transportation Department personnel. Program plans for the 1982 fiscal year are listed and discussed. Other water-resources programs and publications that may be of interest are discussed and all available flood-prone-area maps for Arkansas are listed.

Critical analysis of robotic surgery for laryngeal tumours.

PubMed

Esteban, Francisco; Menoyo, Alicia; Abrante, Antonio

2014-01-01

In recent years, transoral robotic surgery (TORS) with the Da Vinci robot has been used for the removal of laryngeal cancers with the objective to improve functional and aesthetic outcomes without worsening survival. The advantages of TORS are described in this article. However, its disadvantages, mainly high cost amongst others, do not make robotic surgery the current treatment of choice for laryngeal tumours; transoral laser surgery is superior in most cases. Major technical improvements are expected. Smaller, more ergonomic, new-generation robots better adapted to the head and neck will probably be available in the near future. Copyright © 2013 Elsevier España, S.L.U. y Sociedad Española de Otorrinolaringología y Patología Cérvico-Facial. All rights reserved.

Advanced Launch System propulsion focused technology liquid methane turbopump technical implementation plan

NASA Technical Reports Server (NTRS)

Csomor, A.; Nielson, C. E.

1989-01-01

This program will focus on the integration of all functional disciplines of the design, manufacturing, materials, fabrication and producibility to define and demonstrate a highly reliable, easily maintained, low cost liquid methane turbopump as a component for the STBE (Space Transportation Booster Engine) using the STME (main engine) oxygen turbopump. A cost model is to be developed to predict the recurring cost of production hardware and operations. A prime objective of the program is to design the liquid methane turbopump to be used in common with a LH2 turbopump optimized for the STME. Time phasing of the effort is presented and interrelationship of the tasks is defined. Major subcontractors are identified and their roles in the program are described.

An Approach to the Reuse of Technical Materials for Educational Purposes

NASA Technical Reports Server (NTRS)

Levinstein, Irwin; Bryant, Wayne H. (Technical Monitor)

2001-01-01

This project addresses the problem of transforming technical documents intended for a technical audience into educational materials directed toward segments of the general public. In particular it addresses the conversion of technical material into Internet based educational materials. A major consideration of the project is the conservation of the time of subject matter experts in the organization in recognition of the fact that such experts are likely to be more valuable to the organization for purposes other than the production of educational outreach.

Feasibility of Retrofitting Lifts on Commuter and Light Rail Vehicles

DOT National Transportation Integrated Search

1980-09-01

The objectives of this study were to determine if lift retrofit applications to rail vehicles are technically feasible, and if so, the extent to which existing bus lift technology can be utilized. This report examines some of the technical issues ass...

A New Undergraduate Course on the Physics of Space Situational Awareness

NASA Astrophysics Data System (ADS)

Jost, T.; Dearborn, M.; Chun, F.; McHarg, G.

As documented in the National Defense Authorization Act for fiscal year 2010, space situational awareness (SSA) is a high priority for the DoD and intelligence community. A fundamental understanding of the technical issues involved with SSA requires knowledge in many different scientific areas. The mission of the United States Air Force Academy (USAFA) is to educate, train, and inspire men and women to become officers of character motivated to lead the United States Air Force in service to our Nation. The physics department is implementing the USAFA mission and the need for technically competent officers in SSA through a comprehensive SSA Initiative. As part of the Initiative, we are developing a course to provide junior or senior cadets with the scientific background necessary to understand the challenges associated with SSA missions and systems. This presentation introduces the planned course objectives and includes a discussion of topics to be covered. Examples of topics include, optically resolved imaging, radiometry and photometry, radar detection and tracking, orbital prediction, debris and collision avoidance, detection of proximity operations and modeling and simulation tools. Cadets will have hands-on opportunities to collect metrics of a designated object using Academy assets such as the 41 cm telescope. Cadets will convert telescope gimbal angles into an orbital data. Cadets will synthesize what they learned in the course by completing the semester with a final project where the collected data is merged with a notional scenario to present a mock decision briefing. This class will be open to cadets of any academic major, since the intent is to prepare officers with basic technical competence in SSA applications. This is critical since graduates of the Academy become commissioned officers in the military and serve in a large variety of leadership positions -- from the researcher to the warfighter. Since we are currently developing the course, the SSA community will be invited to send online feedback to USAFA physics department faculty and to participate by providing materials that may be integrated into course.

48 CFR 52.227-21 - Technical Data Declaration, Revision, and Withholding of Payment-Major Systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., ________, hereby declares that, to the best of its knowledge and belief, the technical data delivered herewith... reflect engineering design changes made during the performance of this contract and affecting the form...

Structured light optical microscopy for three-dimensional reconstruction of technical surfaces

NASA Astrophysics Data System (ADS)

Kettel, Johannes; Reinecke, Holger; Müller, Claas

2016-04-01

In microsystems technology quality control of micro structured surfaces with different surface properties is playing an ever more important role. The process of quality control incorporates three-dimensional (3D) reconstruction of specularand diffusive reflecting technical surfaces. Due to the demand on high measurement accuracy and data acquisition rates, structured light optical microscopy has become a valuable solution to solve this problem providing high vertical and lateral resolution. However, 3D reconstruction of specular reflecting technical surfaces still remains a challenge to optical measurement principles. In this paper we present a measurement principle based on structured light optical microscopy which enables 3D reconstruction of specular- and diffusive reflecting technical surfaces. It is realized using two light paths of a stereo microscope equipped with different magnification levels. The right optical path of the stereo microscope is used to project structured light onto the object surface. The left optical path is used to capture the structured illuminated object surface with a camera. Structured light patterns are generated by a Digital Light Processing (DLP) device in combination with a high power Light Emitting Diode (LED). Structured light patterns are realized as a matrix of discrete light spots to illuminate defined areas on the object surface. The introduced measurement principle is based on multiple and parallel processed point measurements. Analysis of the measured Point Spread Function (PSF) by pattern recognition and model fitting algorithms enables the precise calculation of 3D coordinates. Using exemplary technical surfaces we demonstrate the successful application of our measurement principle.

Technical Training on High-Order Spectral Analysis and Thermal Anemometry Applications

NASA Technical Reports Server (NTRS)

Maslov, A. A.; Shiplyuk, A. N.; Sidirenko, A. A.; Bountin, D. A.

2003-01-01

The topics of thermal anemometry and high-order spectral analyses were the subject of the technical training. Specifically, the objective of the technical training was to study: (i) the recently introduced constant voltage anemometer (CVA) for high-speed boundary layer; and (ii) newly developed high-order spectral analysis techniques (HOSA). Both CVA and HOSA are relevant tools for studies of boundary layer transition and stability.

A technical platform for environments for ageing--lessons learned from three field studies.

PubMed

Eichelberg, Marco; Büsching, Felix; Steen, Enno-Edzard; Helmer, Axel; Thiel, Andreas; Hein, Andreas; Wolf, Lars

2014-01-01

The Lower Saxony Research Network "Design of Environments for Ageing" (GAL) studied possible applications of assistive technology for enabling older adults to live longer and independent in their own home. As part of this work, a technical platform was developed as a common technical basis for all assistive systems in the project. This article presents an overview of the architecture and core functionality of the technical platform, which in the first generation was developed for use in a laboratory setting, and in a second generation was extended for use in the project's field studies, i.e. prototype installations in end-users homes. The field studies' primary objective was the evaluation of the assistive technologies, that were developed within the overall project. However, these studies also confirmed that the fundamental concept of the technical platform is valid, and the prototypes continuously worked 24 h a day for several months. However, there were some problems related to lack of infrastructure in the older adults' homes and human factors such as inadvertent placement of objects across sensors' field of view, acceptance problems due to aesthetical reasons or simply communication problems, which show that making complex technologies work for users with little technical experience is well possible, but requires a careful consideration of the complete service chain and related "soft factors".

Preparing Facilitators From Community-Based Organizations for Evidence-Based Intervention Training in Second Life

PubMed Central

Valladares, Angel Felix; Tschannen, Dana; Villarruel, Antonia Maria

2014-01-01

Background A major barrier to the use and scale-up of evidence-based interventions are challenges related to training and capacity building. A cost-effective and highly interactive multi-user virtual environment, Second Life (SL) is a promising alternative for comprehensive face-to-face facilitator training. Objective The purpose of this study was to examine the feasibility of using SL to train facilitators from community-based organizations to use ¡Cuídate! (Take Care of Yourself), one of the few evidence-based interventions developed and tested with Latino youth to reduce sexual risk behaviors. Methods We recruited 35 participants from community-based organizations throughout the United States to participate in the SL ¡Cuídate! Training of Facilitators. Preparation to use SL consisted of four phases: (1) recruitment and computer capacity screening, (2) enrollment, (3) orientation to the SL program, and (4) technical support throughout the synchronous training sessions. Technical difficulties, the associated cause, and the mitigation strategy implemented were recorded during each session. Participants completed evaluations including perceptions of self-efficacy and confidence to complete the necessary skills to participate in SL training. Results Overall, participants reported high levels of self-efficacy for all skills necessary to participate in SL training. Based on an 11-point scale (0-10), self-efficacy to download and access the software was rated the highest: mean 8.29 (SD 2.19). Interacting with items in SL had the lowest mean score: mean 7.49 (SD 2.89). The majority of technical difficulties experienced by participants were related to inadequate Internet connections or computer malfunctions. Conclusions Our findings support the feasibility of using SL for the ¡Cuídate! Training of Facilitators. The process used in this study to prepare participants to use SL can be used as a basis for other evidence-based intervention training in SL. This study is an important contribution to developing cost-effective and accessible training options for evidence-based interventions. PMID:25270991

Simulation of pipeline in the area of the underwater crossing

NASA Astrophysics Data System (ADS)

Burkov, P.; Chernyavskiy, D.; Burkova, S.; Konan, E. C.

2014-08-01

The article studies stress-strain behavior of the main oil-pipeline section Alexandrovskoye-Anzhero-Sudzhensk using software system Ansys. This method of examination and assessment of technical conditions of objects of pipeline transport studies the objects and the processes that affect the technical condition of these facilities, including the research on the basis of computer simulation. Such approach allows to develop the theory, methods of calculations and designing of objects of pipeline transport, units and parts of machines, regardless of their industry and destination with a view to improve the existing constructions and create new structures, machines of high performance, durability and reliability, maintainability, low material capacity and cost, which have competitiveness on the world market.

Decoupling Coupled Constraints Through Utility Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, N; Marden, JR

2014-08-01

Several multiagent systems exemplify the need for establishing distributed control laws that ensure the resulting agents' collective behavior satisfies a given coupled constraint. This technical note focuses on the design of such control laws through a game-theoretic framework. In particular, this technical note provides two systematic methodologies for the design of local agent objective functions that guarantee all resulting Nash equilibria optimize the system level objective while also satisfying a given coupled constraint. Furthermore, the designed local agent objective functions fit into the framework of state based potential games. Consequently, one can appeal to existing results in game-theoretic learning tomore » derive a distributed process that guarantees the agents will reach such an equilibrium.« less

An international survey of medical licensing requirements for immigrating physicians, focusing on communication evaluation

PubMed Central

Weedle, Rebecca; Morris, Marie; Ridgway, Paul

2016-01-01

Objectives To identify current entry requirements set by international medical licensing bodies for immigrating physicians, focusing on postgraduate level communication skills, clinical and technical skill assessments. Methods A standardised, author developed survey was administered to a selection of national, state and provincial licensing institutions across 6 continents. Representative institutions were selected from the most populated regions of each continent. Surveys were administered by email and telephone. The information was also searched by website review. Website information alone was used if no response was received by the targeted institution after 2 phone/2 email attempts. Statistical analysis of the non-parametric data was conducted using SPSS (v.21). Results Thirty-seven licensing bodies were contacted from 30 countries; verifiable information was available for 29; twenty-six responded to the communication inquiry. Sixty five 65.4% (n=17) surveyed communication skills, 100% involved language proficiency testing; 11.5% tested other forms of communication skills. For clinical and technical skills, 86.2% (n=25) assessed candidates by credential review, 72.4% (n=21) required both credential review and exam and 62.1% (n=18) used country-specific examination. A mentorship period were required by 37.9% (n=11), ranging from 3 months to 1 year. Only 2 countries identified examinations for recertification. No technical/clinical skills nor communication skill evaluation (beyond language proficiency) are routinely assessed at the postgraduate level. Conclusions International assessments of migrating physicians are heterogeneous. Communication skills, beyond language proficiency, are not routinely assessed in foreign trained physicians seeking entry. The majority of clinical and technical skills are assessed by credential review only. This study highlights the lack of standardisation of assessment internationally and the need for steps toward a global agreement on training schemes and summative assessment. PMID:26851517

Coil-Assisted Retrograde Transvenous Obliteration (CARTO) for the Treatment of Portal Hypertensive Variceal Bleeding: Preliminary Results

PubMed Central

Lee, Edward W; Saab, Sammy; Gomes, Antoinette S; Busuttil, Ronald; McWilliams, Justin; Durazo, Francisco; Han, Steven-Huy; Goldstein, Leonard; Tafti, Bashir A; Moriarty, John; Loh, Christopher T; Kee, Stephen T

2014-01-01

OBJECTIVES: To describe the technical feasibility, safety, and clinical outcomes of coil-assisted retrograde transvenous obliteration (CARTO) in treating portal hypertensive non-esophageal variceal hemorrhage. METHODS: From October 2012 to December 2013, 20 patients who received CARTO for the treatment of portal hypertensive non-esophageal variceal bleeding were retrospectively evaluated. All 20 patients had at least 6-month follow-up. All patients had detachable coils placed to occlude the efferent shunt and retrograde gelfoam embolization to achieve complete thrombosis/obliteration of varices. Technical success, clinical success, rebleeding, and complications were evaluated at follow-up. RESULTS: A 100% technical success rate (defined as achieving complete occlusion of efferent shunt with complete thrombosis/obliteration of bleeding varices and/or stopping variceal bleeding) was demonstrated in all 20 patients. Clinical success rate (defined as no variceal rebleeding) was 100%. Follow-up computed tomography after CARTO demonstrated decrease in size with complete thrombosis and disappearance of the varices in all 20 patients. Thirteen out of the 20 had endoscopic confirmation of resolution of varices. Minor post-CARTO complications, including worsening of esophageal varices (not bleeding) and worsening of ascites/hydrothorax, were noted in 5 patients (25%). One patient passed away at 24 days after the CARTO due to systemic and portal venous thrombosis and multi-organ failure. Otherwise, no major complication was noted. No variceal rebleeding was noted in all 20 patients during mean follow-up of 384±154 days. CONCLUSIONS: CARTO appears to be a technically feasible and safe alternative to traditional balloon-occluded retrograde transvenous obliteration or transjugular intrahepatic portosystemic shunt, with excellent clinical outcomes in treating portal hypertensive non-esophageal variceal bleeding. PMID:25273155

Interventional Radiology-Operated Cholecystoscopy for the Management of Symptomatic Cholelithiasis: Approach, Technical Success, Safety, and Clinical Outcomes.

PubMed

Patel, Nishant; Chick, Jeffrey Forris Beecham; Gemmete, Joseph J; Castle, Jordan C; Dasika, Narasimham; Saad, Wael E; Srinivasa, Ravi N

2018-05-01

The objective of our study was to report the technique, complications, and clinical outcomes of interventional radiology-operated cholecystoscopy with stone removal for the management of symptomatic cholelithiasis. Ten (77%) men and three (23%) women (mean age, 65 years) with symptomatic cholelithiasis underwent cholecystostomy followed by interventional radiology-operated cholecystoscopy with stone removal. Major comorbidities precluding cholecystectomy included prior cardiac, pulmonary, or abdominal surgery; cirrhosis; sepsis with hyponatremia; seizure disorder; developmental delay; and cholecystoduodenal fistula. Cholecystostomy access, time between cholecystostomy and cholecystoscopy, endoscopic and fragmentation devices used, technical success, procedure time, fluoroscopy time, complications, length of hospital stay, time between cholecystoscopy and cholecystostomy removal, follow-up, and acute cholecystitis recurrence were recorded. Eleven (85%) patients underwent transhepatic cholecystostomy, and two (15%) patients underwent transperitoneal cholecystostomy. The mean time from cholecystostomy to cholecystoscopy was 151 days. Flexible endoscopy was used in eight (62%) patients, rigid endoscopy in three (23%), and both flexible and rigid in two (15%). Electrohydraulic lithotripsy was used in eight procedures, nitinol baskets in seven, ultrasonic lithotripsy in two, and percutaneous thrombectomy devices in one. Primary technical success was achieved in 11 (85%) patients, and secondary technical success was achieved in 13 (100%) patients. The mean procedure time was 164 minutes, and the mean number of procedures required to clear all gallstones was 1. One (8%) patient developed acute pancreatitis, and one (8%) patient died of gastrointestinal hemorrhage. The median hospital length of stay after cholecystoscopy was 1 day for postoperative monitoring. The mean time between cholecystoscopy and cholecystostomy removal was 39 days. One (8%) patient developed recurrent acute cholecystitis 1095 days after cholecystoscopy. Interventional radiology-operated cholecystoscopy may serve as an effective method for percutaneous gallstone removal in patients with multiple comorbidities precluding cholecystectomy.

Ceramic High Efficiency Particulate Air (HEPA) Filter Final Report CRADA No. TC02160.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mitchell, M.; Bergman, W.

2017-08-25

The technical objective of this project was to develop a ceramic HEPA filter technology, by initially producing and testing coupon ceramics, small scale prototypes, and full scale prototype HEPA filters, and to address relevant manufacturing and commercialization technical issues.

An approach to knowledge structuring for advanced phases of the Technical and Management Information System (TMIS)

NASA Technical Reports Server (NTRS)

Goranson, H. T.

1986-01-01

The Technical and Management Information System (TMIS) must employ on enlightened approach to its object structure, but basic issues in conceptual structuring remain to be resolved. Sirius outlines the necessary agenda and reports on progress toward solutions.

EST Readers: Some Principles for Their Design and Use.

ERIC Educational Resources Information Center

Moore, Christopher J.

1983-01-01

The editor of "Heinemann's Science and Technology Readers" responds to questions concerning the objectives and design of the series. The market for technical readers; reader format and difficulty level; illustrations, technical exercises, and the language teacher; and the intended classroom use are discussed. (MSE)

Theoretical Perspectives on Fishing Vessel Accidents and Their Prevention.

ERIC Educational Resources Information Center

Boshier, Roger

Fishing vessel accidents occur because of complex interactions of human, technical, and environmental factors. Although they usually occur because of human actions, thoughts, or behavior, investigators and prevention educators are preoccupied with technical matters and equipment. Equipment, machinery, weather, and other objective facts are…

Crowd-sourced assessment of technical skills: an opportunity for improvement in the assessment of laparoscopic surgical skills.

PubMed

Deal, Shanley B; Lendvay, Thomas S; Haque, Mohamad I; Brand, Timothy; Comstock, Bryan; Warren, Justin; Alseidi, Adnan

2016-02-01

Objective, unbiased assessment of surgical skills remains a challenge in surgical education. We sought to evaluate the feasibility and reliability of Crowd-Sourced Assessment of Technical Skills. Seven volunteer general surgery interns were given time for training and then testing, on laparoscopic peg transfer, precision cutting, and intracorporeal knot-tying. Six faculty experts (FEs) and 203 Amazon.com Mechanical Turk crowd workers (CWs) evaluated 21 deidentified video clips using the Global Objective Assessment of Laparoscopic Skills validated rating instrument. Within 19 hours and 15 minutes we received 662 eligible ratings from 203 CWs and 126 ratings from 6 FEs over 10 days. FE video ratings were of borderline internal consistency (Krippendorff's alpha = .55). FE ratings were highly correlated with CW ratings (Pearson's correlation coefficient = .78, P < .001). We propose the use of Crowd-Sourced Assessment of Technical Skills as a reliable, basic tool to standardize the evaluation of technical skills in general surgery. Copyright © 2016 Elsevier Inc. All rights reserved.

The Efficiency and Budgeting of Public Hospitals: Case Study of Iran

PubMed Central

Yusefzadeh, Hasan; Ghaderi, Hossein; Bagherzade, Rafat; Barouni, Mohsen

2013-01-01

Background Hospitals are the most costly and important components of any health care system, so it is important to know their economic values, pay attention to their efficiency and consider factors affecting them. Objective The aim of this study was to assess the technical scale and economic efficiency of hospitals in the West Azerbaijan province of Iran, for which Data Envelopment Analysis (DEA) was used to propose a model for operational budgeting. Materials and Methods This study was a descriptive-analysis that was conducted in 2009 and had three inputs and two outputs. Deap2, 1 software was used for data analysis. Slack and radial movements and surplus of inputs were calculated for selected hospitals. Finally, a model was proposed for performance-based budgeting of hospitals and health sectors using the DEA technique. Results The average scores of technical efficiency, pure technical efficiency (managerial efficiency) and scale efficiency of hospitals were 0.584, 0.782 and 0.771, respectively. In other words the capacity of efficiency promotion in hospitals without any increase in costs and with the same amount of inputs was about 41.5%. Only four hospitals among all hospitals had the maximum level of technical efficiency. Moreover, surplus production factors were evident in these hospitals. Conclusions Reduction of surplus production factors through comprehensive planning based on the results of the Data Envelopment Analysis can play a major role in cost reduction of hospitals and health sectors. In hospitals with a technical efficiency score of less than one, the original and projected values of inputs were different; resulting in a surplus. Hence, these hospitals should reduce their values of inputs to achieve maximum efficiency and optimal performance. The results of this method was applied to hospitals a benchmark for making decisions about resource allocation; linking budgets to performance results; and controlling and improving hospitals performance. PMID:24349726

Base compaction specification feasibility analysis.

DOT National Transportation Integrated Search

2012-12-01

The objective of this research is to establish the technical engineering and cost : analysis concepts that will enable WisDOT management to objectively evaluate the : feasibility of switching construction specification philosophies for aggregate base...

Final Test and Evaluation Results from the Solar Two Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

BRADSHAW, ROBERT W.; DAWSON, DANIEL B.; DE LA ROSA, WILFREDO

Solar Two was a collaborative, cost-shared project between 11 U. S. industry and utility partners and the U. S. Department of Energy to validate molten-salt power tower technology. The Solar Two plant, located east of Barstow, CA, comprised 1926 heliostats, a receiver, a thermal storage system, a steam generation system, and steam-turbine power block. Molten nitrate salt was used as the heat transfer fluid and storage media. The steam generator powered a 10-MWe (megawatt electric), conventional Rankine cycle turbine. Solar Two operated from June 1996 to April 1999. The major objective of the test and evaluation phase of the projectmore » was to validate the technical characteristics of a molten salt power tower. This report describes the significant results from the test and evaluation activities, the operating experience of each major system, and overall plant performance. Tests were conducted to measure the power output (MW) of the each major system, the efficiencies of the heliostat, receiver, thermal storage, and electric power generation systems and the daily energy collected, daily thermal-to-electric conversion, and daily parasitic energy consumption. Also included are detailed test and evaluation reports.« less

Implementing and Evaluating a National Certification Technical Skills Examination: The Colorectal Objective Structured Assessment of Technical Skill.

PubMed

de Montbrun, Sandra; Roberts, Patricia L; Satterthwaite, Lisa; MacRae, Helen

2016-07-01

To implement the Colorectal Objective Structured Assessment of Technical skill (COSATS) into American Board of Colon and Rectal Surgery (ABCRS) certification and build evidence of validity for the interpretation of the scores of this high stakes assessment tool. Currently, technical skill assessment is not a formal component of board certification. With the technical demands of surgical specialties, documenting competence in technical skill at the time of certification with a valid tool is ideal. In September 2014, the COSATS was a mandatory component of ABCRS certification. Seventy candidates took the examination, with their performance evaluated by expert colorectal surgeons using a task-specific checklist, global rating scale, and overall performance scale. Passing scores were set and compared using 2 standard setting methodologies, using a compensatory and conjunctive model. Inter-rater reliability and the reliability of the pass/fail decision were calculated using Cronbach alpha and Subkoviak methodology, respectively. Overall COSATS scores and pass/fail status were compared with results on the ABCRS oral examination. The pass rate ranged from 85.7% to 90%. Inter-rater reliability (0.85) and reliability of the pass/fail decision (0.87 and 0.84) were high. A low positive correlation (r= 0.25) was seen between the COSATS and oral examination. All individuals who failed the COSATS passed the ABCRS oral examination. COSATS is the first technical skill examination used in national surgical board certification. This study suggests that the current certification process may be failing to identify individuals who have demonstrated technical deficiencies on this standardized assessment tool.

7 CFR 600.9 - Major land resource area soil survey offices.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 6 2014-01-01 2014-01-01 false Major land resource area soil survey offices. 600.9... CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE GENERAL ORGANIZATION § 600.9 Major land resource area soil... soil survey production. Major land resource area soil survey offices (MO) provide the technical...

7 CFR 600.9 - Major land resource area soil survey offices.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 6 2010-01-01 2010-01-01 false Major land resource area soil survey offices. 600.9... CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE GENERAL ORGANIZATION § 600.9 Major land resource area soil... soil survey production. Major land resource area soil survey offices (MO) provide the technical...

7 CFR 600.9 - Major land resource area soil survey offices.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 6 2011-01-01 2011-01-01 false Major land resource area soil survey offices. 600.9... CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE GENERAL ORGANIZATION § 600.9 Major land resource area soil... soil survey production. Major land resource area soil survey offices (MO) provide the technical...

7 CFR 600.9 - Major land resource area soil survey offices.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 6 2012-01-01 2012-01-01 false Major land resource area soil survey offices. 600.9... CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE GENERAL ORGANIZATION § 600.9 Major land resource area soil... soil survey production. Major land resource area soil survey offices (MO) provide the technical...

7 CFR 600.9 - Major land resource area soil survey offices.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 6 2013-01-01 2013-01-01 false Major land resource area soil survey offices. 600.9... CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE GENERAL ORGANIZATION § 600.9 Major land resource area soil... soil survey production. Major land resource area soil survey offices (MO) provide the technical...

47 CFR 78.109 - Major and minor modifications to stations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false Major and minor modifications to stations. 78... SERVICES CABLE TELEVISION RELAY SERVICE Technical Regulations § 78.109 Major and minor modifications to stations. (a) Amendments to applications and modifications to stations are classified as major or minor. A...

Research and Technology Objectives and Plans Summary (RTOPS)

NASA Technical Reports Server (NTRS)

1992-01-01

This publication represents the NASA research and technology program for FY92. It is a compilation of the Summary portions of each of the RTOP's (Research and Technology Objectives and Plans) used for management review and control of research currently in progress throughout NASA. The RTOP Summary is designed to facilitate communication and coordination among concerned technical personnel in government, in industry, and in universities. The first section containing citations and abstracts of the RTOP's is followed by four indexes: Subject, Technical Monitor, Responsible NASA Organization, and RTOP Number.

Research and technology objectives and plans: Summary fiscal year 1991

NASA Technical Reports Server (NTRS)

1991-01-01

This publication represents the NASA research and technology program for FY 1991. It is a compilation of the Summary portions of each of the RTOP's (Research and Technology Objectives and Plans) used for management review and control of research currently in progress throughout NASA. The RTOP Summary is designed to facilitate communication and coordination among concerned technical personnel in government, industry, and in universities. The first section contains citations and abstracts of the RTOP's and is followed by four indexes: Subject, Technical Monitor, Responsible NASA Organization, and RTOP Number.

Research and Technology Objectives and Plans Summary (RTOPS)

NASA Technical Reports Server (NTRS)

1993-01-01

This publication represents the NASA research and technology program for FY-93. It is a compilation of the Summary portions of each of the RTOP's (Research and Technology Objectives and Plans) used for management review and control of research currently in progress throughout NASA. The RTOP Summary is designed to facilitate communication and coordination among concerned technical personnel in government, in industry, and in universities. The first section containing citations and abstracts of the RTOP's is followed by four indexes: Subject, Technical Monitor, Responsible NASA Organization, and RTOP Number.

2014 Fermilab Laboratory Directed Research & Development Program Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wester, W., editor

2016-05-26

Fermilab is executing Laboratory Directed Research and Development (LDRD) as outlined by order DOE O 413.2B in order to enhance and realize the mission of the laboratory in a manner that also supports the laboratory’s strategic objectives and the mission of the Department of Energy. LDRD funds enable scientific creativity, allow for exploration of “high risk, high payoff” research, and allow for the demonstration of new ideas, technical concepts, and devices. LDRD also has an objective of maintaining and enhancing the scientific and technical vitality of Fermilab.

Research and Technology Objectives and Plans Summary (RTOPS)

NASA Technical Reports Server (NTRS)

1988-01-01

This publication represents the NASA research and technology program for FY88. It is a compilation of the Summary portions of each of the RTOPs (Research and Technology Objectives and Plans) used for management review and control of research currently in progress throughout NASA. The RTOP Summary is designed to facilitate communication and coordination among concerned technical personnel in government, in industry, and in universities. The first section containing citations and abstracts of the RTOPs is followed by four indexes: Subject, Technical Monitor, Responsible NASA Organization, and RTOP Number.

Research and Technology Objectives and Plans Summary (RTOPS)

NASA Technical Reports Server (NTRS)

1989-01-01

This publication represents the NASA research and technology program for FY89. It is a compilation of the Summary portions of each of the RTOPs (Research and Technology Objectives and Plans) used for management review and control of research currently in progress throughout NASA. The RTOP Summary is designed to facilitate communication and coordination among concerned technical personnel in government, in industry, and in universities. The first section containing citations and abstracts of the RTOPs is followed by four indexes: Subject, Technical Monitor, Responsible NASA Organization, and RTOP Number.

Research and Technology Objectives and Plans Summary (RTOPS)

NASA Technical Reports Server (NTRS)

1985-01-01

This publication represents the NASA research and technology program for FY 1985. It is a compilation of the Summary portions of each of the RTOPs (Research and Technology Objectives and Plans) used for management review and control of research currently in progress throughout NASA. The RTOP summary is designed to facilitate communication and coordination among concerned technical personnel in government, in industry, and in universities. The first section containing citations and abstracts of the RTOPs is followed by four indexes: Subject, Technical Monitor, Responsible NASA Organization, and RTOP number.

Research and Technology Objectives and Plans Summary (RTOPS)

NASA Technical Reports Server (NTRS)

1987-01-01

This publication represents the NASA research and technology program for FY87. It is a compilation of the Summary portions of each of the RTOPs (Research and Technology Objectives and Plans) used for management review and control of research currently in progress throughout NASA. The RTOP Summary is designed to facilitate communication and coordination among concerned technical personnel in government, in industry, and in universities. The first section containing citations and abstracts of the RTOPs is followed by four indexes: Subject, Technical Monitor, Responsible NASA Organization, and RTOP Number.

X-Ray Equipment and Protective Devices of Dental Assistant Programs in Pennsylvania Vocational Technical Schools. Vocational-Technical Education Research Report, Health Occupations, Monograph No. 7, Vol. 16, No. 1.

ERIC Educational Resources Information Center

Hominsky, Dolores J.; Hole, F. Marvin

Objectives of a Pennsylvania study were (1) to investigate the ways in which the vocational technical schools of the state have met the recommendations of the Pennsylvania Department of Environmental Resources for classroom structural design and dental x-ray machines in dental assistant training programs and (2) to collect data on the methods by…

The Design and Transfer of Advanced Command and Control (C2) Computer-Based Systems

DTIC Science & Technology

1980-03-31

TECHNICAL REPORT 80-02 QUARTERLY TECHNICAL REPORT: THE DESIGN AND TRANSFER OF ADVANCED COMMAND AND CONTROL (C 2 ) COMPUTER-BASED SYSTEMS ARPA...The Tasks/Objectives and/or Purposes of the overall project are connected with the design , development, demonstration and transfer of advanced...command and control (C2 ) computer-based systems; this report covers work in the computer-based design and transfer areas only. The Technical Problems thus

NDA Batch 2002-13

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hollister, R

QC sample results (daily background check drum and 100-gram SGS check drum) were within acceptance criteria established by WIPP's Quality Assurance Objectives for TRU Waste Characterization. Replicate runs were performed on drum LL85501243TRU. Replicate measurement results are identical at the 95% confidence level as established by WIPP criteria. HWM NCAR No. 02-1000168 issued on 17-Oct-2002 regarding a partially dislodged Cd sheet filter on the HPGe coaxial detector. This physical geometry occurred on 01-Oct-2002 and was not corrected until 10-Oct-2002, during which period is inclusive of the present batch run of drums. Per discussions among the Independent Technical Reviewer, Expert Reviewermore » and the Technical QA Supervisor, as well as in consultation with John Fleissner, Technical Point of Contact from Canberra, the analytical results are technically reliable. All QC standard runs during this period were in control. Data packet for SGS Batch 2002-13 generated using passive gamma-ray spectroscopy with the Pu Facility SGS unit is technically reasonable. All QC samples are in compliance with establiShed control limits. The batch data packet has been reviewed for correctness, completeness, consistency and compliance with WIPP's Quality Assurance Objectives and determined to be acceptable.« less

A major trauma course based on posters, audio-guides and simulation improves the management skills of medical students: Evaluation via medical simulator.

PubMed

Cuisinier, Adrien; Schilte, Clotilde; Declety, Philippe; Picard, Julien; Berger, Karine; Bouzat, Pierre; Falcon, Dominique; Bosson, Jean Luc; Payen, Jean-François; Albaladejo, Pierre

2015-12-01

Medical competence requires the acquisition of theoretical knowledge and technical skills. Severe trauma management teaching is poorly developed during internship. Nevertheless, the basics of major trauma management should be acquired by every future physician. For this reason, the major trauma course (MTC), an educational course in major traumatology, has been developed for medical students. Our objective was to evaluate, via a high fidelity medical simulator, the impact of the MTC on medical student skills concerning major trauma management. The MTC contains 3 teaching modalities: posters with associated audio-guides, a procedural workshop on airway management and a teaching session using a medical simulator. Skills evaluation was performed 1 month before (step 1) and 1 month after (step 3) the MTC (step 2). Nineteen students were individually evaluated on 2 different major trauma scenarios. The primary endpoint was the difference between steps 1 and 3, in a combined score evaluating: admission, equipment, monitoring and safety (skill set 1) and systematic clinical examinations (skill set 2). After the course, the combined primary outcome score improved by 47% (P<0.01). Scenario choice or the order of use had no significant influence on the skill set evaluations. This study shows improvement in student skills for major trauma management, which we attribute mainly to the major trauma course developed in our institution. Copyright © 2015 Société française d’anesthésie et de réanimation (Sfar). Published by Elsevier Masson SAS. All rights reserved.

North Carolina Agricultural and Technical State University Drug Education Policy.

ERIC Educational Resources Information Center

Welborne, Sullivan; And Others

This drug education policy statement for North Carolina Agricultural and Technical State University establishes two educational objectives: to develop an educational program that increases the university community's knowledge and competency regarding controlled substances and to increase the skills required to take corrective action for potential…

Boiler MACT Technical Assistance (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2012-03-01

Fact sheet describing the changes to Environmental Protection Act process standards. The DOE will offer technical assistance to ensure that major sources burning coal and oil have information on cost-effective, clean energy strategies for compliance, and to promote cleaner, more efficient boiler burning to cut harmful pollution and reduce operational costs. The U.S. Environmental Protection Agency (EPA) is expected to finalize the reconsideration process for its Clean Air Act pollution standards National Emissions Standards for Hazardous Air Pollutants for Major Sources: Industrial, Commercial, and Institutional Boilers and Process Heaters (known as Boiler Maximum Achievable Control Technology (MACT)), in Spring 2012.more » This rule applies to large and small boilers in a wide range of industrial facilities and institutions. The U.S. Department of Energy (DOE) will offer technical assistance to ensure that major sources burning coal or oil have information on cost-effective clean energy strategies for compliance, including combined heat and power, and to promote cleaner, more efficient boilers to cut harmful pollution and reduce operational costs.« less

Programs of Study as a State Policy Mandate: A Longitudinal Study of the South Carolina Personal Pathways to Success Initiative. Final Technical Report: Major Findings and Implications

ERIC Educational Resources Information Center

Hammond, Cathy; Drew, Sam F.; Withington, Cairen; Griffith, Cathy; Swiger, Caroline M.; Mobley, Catherine; Sharp, Julia L.; Stringfield, Samuel C.; Stipanovic, Natalie; Daugherty, Lindsay

2013-01-01

This is the final technical report from the National Research Center for Career and Technical Education's (NRCCTE's) five-year longitudinal study of South Carolina's Personal Pathway to Success initiative, which was authorized by the state's Education and Economic Development Act (EEDA) in 2005. NRCCTE-affiliated researchers at the National…

An Assessment of the College Market Spring-Summer 1980.

DTIC Science & Technology

1983-05-01

access to jobs which lead to upper management in business or finance. Men are more likely than women to choose technical majors, plan on technical... feminism in society, the women in the sample strongly endorsed equality in jobs and rejected traditional female roles. They were ambivalent about the...appreciation of the difficulties women would face in selecting technical occupations, as well as business occupations. It is generally accepted, though it

Transit safety retrofit package development : applications requirements document.

DOT National Transportation Integrated Search

2014-05-01

This Application Requirements Document for the Transit Safety Retrofit Package (TRP) Development captures the system, hardware and software requirements towards fulfilling the technical objectives stated within the contract. To achieve the objective ...

ACE: A distributed system to manage large data archives

NASA Technical Reports Server (NTRS)

Daily, Mike I.; Allen, Frank W.

1993-01-01

Competitive pressures in the oil and gas industry are requiring a much tighter integration of technical data into E and P business processes. The development of new systems to accommodate this business need must comprehend the significant numbers of large, complex data objects which the industry generates. The life cycle of the data objects is a four phase progression from data acquisition, to data processing, through data interpretation, and ending finally with data archival. In order to implement a cost effect system which provides an efficient conversion from data to information and allows effective use of this information, an organization must consider the technical data management requirements in all four phases. A set of technical issues which may differ in each phase must be addressed to insure an overall successful development strategy. The technical issues include standardized data formats and media for data acquisition, data management during processing, plus networks, applications software, and GUI's for interpretation of the processed data. Mass storage hardware and software is required to provide cost effective storage and retrieval during the latter three stages as well as long term archival. Mobil Oil Corporation's Exploration and Producing Technical Center (MEPTEC) has addressed the technical and cost issues of designing, building, and implementing an Advanced Computing Environment (ACE) to support the petroleum E and P function, which is critical to the corporation's continued success. Mobile views ACE as a cost effective solution which can give Mobile a competitive edge as well as a viable technical solution.

Basic targeting strategies for rendezvous and flyby missions to the near-Earth asteroids

NASA Astrophysics Data System (ADS)

Perozzi, Ettore; Rossi, Alessandro; Valsecchi, Giovanni B.

2001-01-01

Missions to asteroids and comets are becoming increasingly feasible both from a technical and a financial point of view. In particular, those directed towards the Near-Earth Asteroids have proven suitable for a low-cost approach, thus attracting the major space agencies as well as private companies. The choice of a suitable target involves both scientific relevance and mission design considerations, being often a difficult task to accomplish due to the limited energy budget at disposal. The aim of this paper is to provide an approach to basic trajectory design which allows to account for both aspects of the problem, taking into account scientific and technical information. A global characterization of the Near-Earth Asteroids population carried out on the basis of their dynamics, physical properties and flight dynamics considerations, allows to identify a group of candidates which satisfy both, the scientific and engineering requirements. The feasibility of rendezvous and flyby missions towards them is then discussed and the possibility of repeated encounters with the same object is investigated, as an intermediate scenario. Within this framework, the capability of present and near future launch and propulsion systems for interplanetary missions is also addressed.

Validating the Use of pPerformance Risk Indices for System-Level Risk and Maturity Assessments

NASA Astrophysics Data System (ADS)

Holloman, Sherrica S.

With pressure on the U.S. Defense Acquisition System (DAS) to reduce cost overruns and schedule delays, system engineers' performance is only as good as their tools. Recent literature details a need for 1) objective, analytical risk quantification methodologies over traditional subjective qualitative methods -- such as, expert judgment, and 2) mathematically rigorous system-level maturity assessments. The Mahafza, Componation, and Tippett (2005) Technology Performance Risk Index (TPRI) ties the assessment of technical performance to the quantification of risk of unmet performance; however, it is structured for component- level data as input. This study's aim is to establish a modified TPRI with systems-level data as model input, and then validate the modified index with actual system-level data from the Department of Defense's (DoD) Major Defense Acquisition Programs (MDAPs). This work's contribution is the establishment and validation of the System-level Performance Risk Index (SPRI). With the introduction of the SPRI, system-level metrics are better aligned, allowing for better assessment, tradeoff and balance of time, performance and cost constraints. This will allow system engineers and program managers to ultimately make better-informed system-level technical decisions throughout the development phase.

Water resources scientific information center

USGS Publications Warehouse

Cardin, C. William; Campbell, J.T.

1986-01-01

The Water Resources Scientific Information Center (WRSIC) acquires, abstracts and indexes the major water resources related literature of the world, and makes information available to the water resources community and the public. A component of the Water Resources Division of the US Geological Survey, the Center maintains a searchable computerized bibliographic data base, and publishers a monthly journal of abstracts. Through its services, the Center is able to provide reliable scientific and technical information about the most recent water resources developments, as well as long-term trends and changes. WRSIC was established in 1966 by the Secretary of the Interior to further the objectives of the Water Resources Research Act of 1964--legislation that encouraged research in water resources and the prevention of needless duplication of research efforts. It was determined the WRSIC should be the national center for information on water resources, covering research reports, scientific journals, and other water resources literature of the world. WRSIC would evaluate all water resources literature, catalog selected articles, and make the information available in publications or by computer access. In this way WRSIC would increase the availability and awareness of water related scientific and technical information. (Lantz-PTT)

The Role of Semantics in Open-World, Integrative, Collaborative Science Data Platforms

NASA Astrophysics Data System (ADS)

Fox, Peter; Chen, Yanning; Wang, Han; West, Patrick; Erickson, John; Ma, Marshall

2014-05-01

As collaborative science spreads into more and more Earth and space science fields, both participants and funders are expressing stronger needs for highly functional data and information capabilities. Characteristics include a) easy to use, b) highly integrated, c) leverage investments, d) accommodate rapid technical change, and e) do not incur undue expense or time to build or maintain - these are not a small set of requirements. Based on our accumulated experience over the last ~ decade and several key technical approaches, we adapt, extend, and integrate several open source applications and frameworks to handle major portions of functionality for these platforms. This includes: an object-type repository, collaboration tools, identity management, all within a portal managing diverse content and applications. In this contribution, we present our methods and results of information models, adaptation, integration and evolution of a networked data science architecture based on several open source technologies (Drupal, VIVO, the Comprehensive Knowledge Archive Network; CKAN, and the Global Handle System; GHS). In particular we present the Deep Carbon Observatory - a platform for international science collaboration. We present and discuss key functional and non-functional attributes, and discuss the general applicability of the platform.

Revisiting the utility of technical performance scores following tetralogy of Fallot repair.

PubMed

Lodin, Daud; Mavrothalassitis, Orestes; Haberer, Kim; Sunderji, Sherzana; Quek, Ruben G W; Peyvandi, Shabnam; Moon-Grady, Anita; Karamlou, Tara

2017-08-01

Although an important quality metric, current technical performance scores may not be generalizable and may omit operative factors that influence outcomes. We examined factors not included in current technical performance scores that may contribute to increased postoperative length of stay, major complications, and cost after primary repair of tetralogy of Fallot. This is a retrospective single site study of patients younger than age 2 years with tetralogy of Fallot undergoing complete repair between 2007 and 2015. Medical record data and discharge echocardiograms were reviewed to ascertain component and composite technical performance scores. Primary outcomes included postoperative length of stay, major complications, and total hospital costs. Multivariable logistic and linear regression identified determinants of each outcome. Patient population (n = 115) had a median postoperative length of stay of 8 days (interquartile range, 6-10 days), and a median total cost of $71,147. Major complications occurred in 33 patients (29%) with 1 death. Technical performance scores assigned were optimum in 28 patients (25%), adequate in 59 patients (52%), and inadequate in 26 patients (23%). Neither technical performance score components nor composite scores were associated with increased postoperative length of stay. Optimum or adequate repairs versus inadequate had equal risk of a complication (P = .79), and equivalent mean total cost ($100,000 vs $187,000; P = .25). Longer cardiopulmonary bypass time per 1-minute increase (P < .01) was associated with longer postoperative length of stay and reintervention (P = .02). The need to return to bypass also increased total cost (P < .01). Current tetralogy of Fallot technical performance scores were not associated with selected outcomes in our postoperative population. Although returning to bypass and bypass length are not included as components in the current score, these are important factors influencing complications and resource use in our population. Revisions anticipated from a prospective trial should consider including these variables. Copyright © 2017 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.

Cluster: Drafting. Course: Introduction to Technical Drafting.

ERIC Educational Resources Information Center

Sanford - Lee County Schools, NC.

The set of 10 units is designed for use with an instructor as an introduction to technical drafting, and is also keyed to other texts. Each unit contains several task packages specifying prerequisites, rationale for learning, objectives, learning activities to be supervised by the instructor, and learning practice. The units cover: drafting…

Terrestrial Ecological Unit Inventory technical guide

Treesearch

E. Winthers; D. Fallon; J. Haglund; T. DeMeo; G. Nowacki; D. Tart; M. Ferwerda; G. Robertson; A. Gallegos; A. Rorick; D. T. Cleland; W. Robbie

2005-01-01

The purpose of this technical guide is to provide specific direction and guidance for conducting Terrestrial Ecological Unit Inventory (TEUI) at the landscape and land-unit scales. TEUI seeks to classify ecological types and map terrestrial ecological units (TEUs) to a consistent standard throughout National Forest System lands. The objectives, policies, and...

"Let There Be Light" Minicourse, Career Oriented Pre-Technical Physics.

ERIC Educational Resources Information Center

Dallas Independent School District, TX.

This instructional guide, intended for student use, develops the concept of light through a series of sequential activities. A technical development of the subject is pursued with examples stressing practical aspects of the concepts. Included in the minicourse are: (1) the rationale, (2) terminal behavioral objectives, (3) enabling behavioral…

Engineering Technology Careers; Career Guidance Information for Engineering Technicians. Publication No. 1065.

ERIC Educational Resources Information Center

National Council of Technical Schools, Washington, DC.

Prepared by the National Council of Technical Schools, this reference may be used by prospective students , their parents, and counselors in learning the philosophy and objectives, historical background, and present status of technical schools and career opportunities as a technician. Career opportunities included are: (1) Aerospace/Aviation…

Radioactivity and Man Minicourse, Career Oriented Pre-Technical Physics.

ERIC Educational Resources Information Center

Dallas Independent School District, TX.

This instructional guide, intended for student use, develops the subject of radioactivity and man through a series of sequential activities. A technical development of the subject is pursued with examples stressing practical aspects of the concepts. Included in the minicourse are: (1) the rationale, (2) terminal behavioral objectives, (3) enabling…

Technical Drafting and Mental Visualization in Interior Architecture Education

ERIC Educational Resources Information Center

Arslan, Ali Riza; Dazkir, Sibel Seda

2017-01-01

We explored how beginning-level interior architecture students develop skills to create mental visualizations of three-dimensional objects and environments, how they develop their technical drawing skills, and whether or not physical and computer generated models aid this design process. We used interviews and observations to collect data. The…

Word Processing for Technical Writers and Teachers.

ERIC Educational Resources Information Center

Mullins, Carolyn J.; West, Thomas W.

This discussion of the computing network and word processing facilities available to professionals on the Indiana University campuses identifies the word and text processing needs of technical writers and faculty, describes the current computing network, and outlines both long- and short-range objectives, policies, and plans for meeting these…

A Technical Evaluation of the First Stage of the Mediterranean Regional Project.

ERIC Educational Resources Information Center

Hollister, Robinson

Objectives of this technical evaluation concerning the transfer of experience in the development of human resources were to develop educational plans based upon comprehensive estimates of manpower requirements and to evaluate the methods used in estimating manpower requirements for educational planning. The methodology involved estimates of the…

National Data Program for the Marine Environment Technical Development Plan. Final Report, Volume Two.

ERIC Educational Resources Information Center

System Development Corp., Santa Monica, CA.

A national data program for the marine environment is recommended. Volume 2 includes: (1) objectives, scope, and methodology; (2) summary of the technical development plan; (3) agency development plans - Great Lakes and coastal development and (4) marine data network development plans. (Author)

Emergency Care Skills for Occupational Health Nurses.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh. Occupational Information Center.

Designed for use in community colleges, technical colleges, and technical institutes, this manual contains a course for teaching emergency care skills to both licensed practical and registered nurses employed in occupational health. The manual consists of three sections. In section 1 the need for the course, its content, objectives, length,…

Examining Differences between Light and Heavier Smoking Vocational Students: A Pilot Study

ERIC Educational Resources Information Center

de Araujo, Vanessa A.; Loukas, Alexandra; Gottlieb, Nell H.

2011-01-01

Objective: To examine differences between light and heavier smoking vocational/technical students in tobacco use, related behaviors, and cessation. Design: Cross-sectional. Setting and Methods: Two hundred and four smokers attending two vocational/technical colleges in east Texas, USA, completed an anonymous survey during a regularly scheduled…

The Shaping of Managers' Security Objectives through Information Security Awareness Training

ERIC Educational Resources Information Center

Harris, Mark A.

2010-01-01

Information security research states that corporate security policy and information security training should be socio-technical in nature and that corporations should consider training as a primary method of protecting their information systems. However, information security policies and training are predominately technical in nature. In addition,…

NUTRIENT CRITERIA TECHNICAL GUIDANCE MANUAL - ESTUARINE AND COASTAL MARINE WATERS, OCTOBER 2001

EPA Science Inventory

Nutrient overenrichment is a major cause of water pollution in the United States. The purpose of this manual is to provide scientifically defensible technical guidance to assist States, authorized Tribes, and other governmental entities in developing numeric nutrient criteria fo...

Technical variations in low-input RNA-seq methodologies.

PubMed

Bhargava, Vipul; Head, Steven R; Ordoukhanian, Phillip; Mercola, Mark; Subramaniam, Shankar

2014-01-14

Recent advances in RNA-seq methodologies from limiting amounts of mRNA have facilitated the characterization of rare cell-types in various biological systems. So far, however, technical variations in these methods have not been adequately characterized, vis-à-vis sensitivity, starting with reduced levels of mRNA. Here, we generated sequencing libraries from limiting amounts of mRNA using three amplification-based methods, viz. Smart-seq, DP-seq and CEL-seq, and demonstrated significant technical variations in these libraries. Reduction in mRNA levels led to inefficient amplification of the majority of low to moderately expressed transcripts. Furthermore, noise in primer hybridization and/or enzyme incorporation was magnified during the amplification step resulting in significant distortions in fold changes of the transcripts. Consequently, the majority of the differentially expressed transcripts identified were either high-expressed and/or exhibited high fold changes. High technical variations ultimately masked subtle biological differences mandating the development of improved amplification-based strategies for quantitative transcriptomics from limiting amounts of mRNA.

Astronomy Instruction at a Two-year Technical College

NASA Astrophysics Data System (ADS)

Sirola, C. J.

2000-12-01

Over half of all students now begin their college careers at two-year institutions (technical colleges, junior colleges, vocational schools, etc.). This shift in student demographics has broad implications for college-level science instruction, including astronomy instruction. We compare astronomy instruction at two-year institutions to that at traditional four-year universities. A typical two-year school like Tri-County Technical College profers challenges not typically faced by research universities such as lack of research funding, little equipment or facilities, and a generally lower level of student ability. Conversely, a Tri-County Tech offers opportunities such as extensive training in teaching methodologies, a wide range of student demographics, and small classroom sizes. Our students are rarely interested in astronomy as a major, but instead take astronomy to fulfill other major requirements or to ensure the transfer of science credits to four-year universities. We present several examples of astronomy instruction at Tri-County Technical College and discuss our philosophy of teaching in a post-secondary environment whose enrollment is on the rise.

Career Education Curriculum Development Project: Instructional Objectives. Technical Paper No. 339-1.

ERIC Educational Resources Information Center

Bergan, John R.; And Others

Part of the AIR Career Education Curriculum Development Project, the paper is directed to assisting teachers with a step-by-step procedure in preparing instructional objectives for career education programs. Clearly defined objectives are useful in providing: direction for teacher and learner, opportunity for questioning traditional educational…

Learning Objects--Instructional Metadata and Sequencing.

ERIC Educational Resources Information Center

Redeker, Giselher

The main focus of current discussions within the standardization process of learning technology is on economical opportunities and technical aspects of learning objects. There has been little discussion about the instructional or didactical issues. The purpose of this paper is to conceptualize a taxonomy of learning objects for the facilitation of…

10 CFR 60.112 - Overall system performance objective for the geologic repository after permanent closure.

Code of Federal Regulations, 2010 CFR

2010-01-01

... repository after permanent closure. 60.112 Section 60.112 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Technical Criteria Performance Objectives § 60.112 Overall system performance objective for the geologic repository after permanent closure...

Multi-criteria decision models for forestry and natural resources management: an annotated bibliography

Treesearch

Joseph E. de Steiguer; Leslie Liberti; Albert Schuler; Bruce Hansen

2003-01-01

Foresters and natural resource managers must balance conflicting objectives when developing land-management plans. Conflicts may encompass economic, environmental, social, cultural, technical, and aesthetic objectives. Selecting the best combination of management uses from numerous objectives is difficult and challenging. Multi-Criteria Decision Models (MCDM) provide a...

Interaction of Flowing Plasma with Collecting Objects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hutchinson, Ian; Haakonsen, Christian Brent; Zhou, Chuteng

Grant DE-SC0010491 has supported ground-breaking research into the wakes and interaction of flowing plasma with collecting objects. This fi nal report outlines the technical achievements and statistics concerning products, participants, and impact.

Hanford Environmental Dose Reconstruction Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cannon, S.D.; Finch, S.M.

1992-10-01

The objective of the Hanford Environmental Dose Reconstruction (HEDR) Project is to estimate the radiation doses that individuals and populations could have received from nuclear operations at Hanford since 1944. The independent Technical Steering Panel (TSP) provides technical direction. The project is divided into the following technical tasks. These tasks correspond to the path radionuclides followed from release to impact on humans (dose estimates):Source Terms, Environmental Transport, Environmental Monitoring Data, Demography, Food Consumption, and Agriculture, and Environmental Pathways and Dose Estimates.

Managing change: an overview.

PubMed

Lorenzi, N M; Riley, R T

2000-01-01

As increasingly powerful informatics systems are designed, developed, and implemented, they inevitably affect larger, more heterogeneous groups of people and more organizational areas. In turn, the major challenges to system success are often more behavioral than technical. Successfully introducing such systems into complex health care organizations requires an effective blend of good technical and good organizational skills. People who have low psychological ownership in a system and who vigorously resist its implementation can bring a "technically best" system to its knees. However, effective leadership can sharply reduce the behavioral resistance to change-including to new technologies-to achieve a more rapid and productive introduction of informatics technology. This paper looks at four major areas-why information system failures occur, the core theories supporting change management, the practical applications of change management, and the change management efforts in informatics.

The Asteroid Impact and Deflection Assessment Mission and its Potential Contributions to Human Exploration of Asteroids

NASA Technical Reports Server (NTRS)

Abell, Paul A.; Rivkin, Andy S.

2014-01-01

The joint ESA and NASA Asteroid Impact and Deflection Assessment (AIDA) mission will directly address aspects of NASA's Asteroid Initiative and will contribute to future human exploration. The NASA Asteroid Initiative is comprised of two major components: the Grand Challenge and the Asteroid Mission. The first component, the Grand Challenge, focuses on protecting Earth's population from asteroid impacts by detecting potentially hazardous objects with enough warning time to either prevent them from impacting the planet, or to implement civil defense procedures. The Asteroid Mission, involves sending astronauts to study and sample a near-Earth asteroid (NEA) prior to conducting exploration missions of the Martian system, which includes Phobos and Deimos. AIDA's primary objective is to demonstrate a kinetic impact deflection and characterize the binary NEA Didymos. The science and technical data obtained from AIDA will aid in the planning of future human exploration missions to NEAs and other small bodies. The dual robotic missions of AIDA, ESA's Asteroid Impact Monitor (AIM) and NASA's Double Asteroid Redirection Test (DART), will provide a great deal of technical and engineering data on spacecraft operations for future human space exploration while conducting in-depth scientific examinations of the binary target Didymos both prior to and after the kinetic impact demonstration. The knowledge gained from this mission will help identify asteroidal physical properties in order to maximize operational efficiency and reduce mission risk for future small body missions. The AIDA data will help fill crucial strategic knowledge gaps concerning asteroid physical characteristics that are relevant for human exploration considerations at similar small body destinations.

3D Model Generation From the Engineering Drawing

NASA Astrophysics Data System (ADS)

Vaský, Jozef; Eliáš, Michal; Bezák, Pavol; Červeňanská, Zuzana; Izakovič, Ladislav

2010-01-01

The contribution deals with the transformation of engineering drawings in a paper form into a 3D computer representation. A 3D computer model can be further processed in CAD/CAM system, it can be modified, archived, and a technical drawing can be then generated from it as well. The transformation process from paper form to the data one is a complex and difficult one, particularly owing to the different types of drawings, forms of displayed objects and encountered errors and deviations from technical standards. The algorithm for 3D model generating from an orthogonal vector input representing a simplified technical drawing of the rotational part is described in this contribution. The algorithm was experimentally implemented as ObjectARX application in the AutoCAD system and the test sample as the representation of the rotational part was used for verificaton.

The Earth Resources Data Project

NASA Technical Reports Server (NTRS)

Harwood, P.

1981-01-01

The Council of State Planning Agencies, in consultation with the National Governor's Association and NASA, initiated the Earth Resources Data Project to encourage the appropriate application of cost-effective science and technology to state natural resources issues and problems. This project was established to provide a focal point for identifying those issues associated with state use of remote sensing and related technology. One project goal is to elevate to the consciousness of state policy and program officials new technologies, such as LANDSAT, by association with major issues to which policy officials are attuned. The project assists the coordination between the states and NASA and promotes communication on those issues. A related project objective is to encourage technical assistance opportunities for states that will promote better use of remote sensing and natural resources data in state programs.

Long Baseline Nulling Interferometry with the Keck Telescopes: A Progress Report

NASA Technical Reports Server (NTRS)

Mennesson, Bertrand; Akeson, R.; Appleby, E.; Bell, J.; Booth, A.; Colavita, M. M.; Crawford, S.; Creech-Eakman, M. J.; Dahl, W.; Fanson, J.;

ERD WATERSHED AND WATER QUALITY MODEL DEVELOPMENT AND TECHNICAL SUPPORT PROGRAM

EPA Science Inventory

The ERD has a long history in providing model research and development and technical support to Regions, States and the Office of Water for watersheds/water quality ecosystem research. The ERD efforts are described in major subtasks comprising the Program. Briefly, these are:

Airborne Laser Remote Sensor for Oil Detection and Classification : Engineering Requirements and Technical Considerations Relevant to a Performance Specification

DOT National Transportation Integrated Search

1975-08-01

This report outlines the engineering requirements for an Airborne Laser Remote Sensor for Oil Detection and Classification System. Detailed engineering requirements are given for the major units of the system. Technical considerations pertinent to a ...

Vocational and Technical Education.

ERIC Educational Resources Information Center

Compact, 1968

1968-01-01

Volume 2, Issue 3 of "Compact" was designed to point out the problems and potential of vocational-technical education and to offer some suggestions for action. Major content includes: (1) "Education for Twenty-First Century Employment," by Wayne Morse, (2) "Pending Federal Legislation Encourages Vocational Innovation," by Grant Venn, (3)…

Institutional ethics policies on medical end-of-life decisions: a literature review.

PubMed

Lemiengre, Joke; de Casterlé, Bernadette Dierckx; Van Craen, Katleen; Schotsmans, Paul; Gastmans, Chris

2007-10-01

The responsibility of healthcare administrators for handling ethically sensitive medical practices, such as medical end-of-life decisions (MELDs), within an institutional setting has been receiving more attention. The overall aim of this paper is to thoroughly examine the prevalence, content, communication, and implementation of written institutional ethics policies on MELDs by means of a literature review. Major databases (Pubmed, Cinahl, PsycINFO, Cochrane Library, FRANCIS, and Philosopher's Index) and reference lists were systematically searched for all relevant papers. Inclusion criteria for relevance were that the study was empirically based and that it focused on the prevalence, content, communication, or implementation of written institutional ethics policies concerning MELDs. Our search yielded 19 studies of American, Canadian, Dutch and Belgian origin. The majority of studies dealt with do-not-resuscitate (DNR) policies (prevalence: 10-89%). Only Dutch and Belgian studies dealt with policies on pain and symptom control (prevalence: 15-19%) and policies on euthanasia (prevalence: 30-79%). Procedural and technical aspects were a prime focus, while the defining of the specific roles of involved parties was unclear. Little attention was given to exploring ethical principles that question the ethical function of policies. In ethics policies on euthanasia, significant consideration was given to procedures that dealt with conscientious objections of physicians and nurses. Empirical studies about the implementation of ethics policies are scarce. With regard to providing support for physicians and nurses, DNR and euthanasia policies expressed support by primarily providing technical and procedural guidelines. Further research is needed whether and in which way written institutional ethics policies on MELDs could contribute to better end-of-life care.

Professional Technical Standards in Colleges and Schools of Pharmacy

PubMed Central

Berry, Tricia M.; Chichester, Clinton O.; Sanoski, Cynthia A.; Woodward, Donald A.; Worley, Marcia M.; Early, Johnnie L.

2011-01-01

Objective To determine the prevalence, characteristics, and use of professional technical standards among colleges and schools of pharmacy accredited by the Accreditation Council for Pharmacy Education (ACPE). Methods The Web site of every college and school of pharmacy accredited by ACPE was searched to identify information regarding the availability, content, and use of technical standards and to obtain demographic information. Results Information was obtained from all of the 114 colleges and schools of pharmacy and 67 (59%) had technical standards in place. Common themes for technical standards were: observation; communication; motor; intellectual, conceptual, integrative and quantitative abilities; and behavioral and social attributes. Of those colleges and schools with technical standards, 61 (91%) had standards that addressed all 5 of these themes and 34 (51%) specified that the technical standards were used in their admission, progression, and graduation procedures. Conclusion More than half of the colleges and schools of pharmacy examined in this study have technical standards; however, 41% have yet to develop and implement them. Colleges and schools of pharmacy looking for guidance in technical standards development could use the technical standards themes identified in this study. PMID:21655404

USDI DCS technical support: Mississippi Test Facility

NASA Technical Reports Server (NTRS)

Preble, D. M.

1975-01-01

The objective of the technical support effort is to provide hardware and data processing support to DCS users so that application of the system may be simply and effectively implemented. Technical support at Mississippi Test Facility (MTF) is concerned primarily with on-site hardware. The first objective of the DCP hardware support was to assure that standard measuring apparatus and techniques used by the USGS could be adapted to the DCS. The second objective was to try to standardize the miscellaneous variety of parameters into a standard instrument set. The third objective was to provide the necessary accessories to simplify the use and complement the capabilities of the DCP. The standard USGS sites have been interfaced and are presently operating. These sites are stream gauge, ground water level and line operated quality of water. Evapotranspiration, meteorological and battery operated quality of water sites are planned for near future DCP operation. Three accessories which are under test or development are the Chu antenna, solar power supply and add-on memory. The DCP has proven to be relatively easy to interface with many monitors. The large antenna is awkward to install and transport. The DCS has met the original requirements well; it has and is proving that an operation, satellite-based data collection system is feasible.

ENVIRONMENTAL TECHNOLOGY VERIFICATION FOR AIR POLLUTION CONTROL TECHNOLOGIES: FINAL REPORT

EPA Science Inventory

The technical objective of the Environmental Technology Verification (ETV) Program's Air Pollution Control Technology (APCT) Center is to verify environmental technology performance by obtaining objective quality-assured data, thus providing potential purchasers and permitters wi...

Uplink Coding

NASA Technical Reports Server (NTRS)

Andrews, Ken; Divsalar, Dariush; Dolinar, Sam; Moision, Bruce; Hamkins, Jon; Pollara, Fabrizio

2007-01-01

This slide presentation reviews the objectives, meeting goals and overall NASA goals for the NASA Data Standards Working Group. The presentation includes information on the technical progress surrounding the objective, short LDPC codes, and the general results on the Pu-Pw tradeoff.

19 CFR 151.13 - Approval of commercial gaugers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... gauger). In general, each technical staff member should have, at a minimum, six months training and..., manufacturer, and country-of-origin. (ii) Major equipment records. Records for each major piece of equipment...

Statewide Invitational Conference on Curriculum Development in Vocational-Technical Education (Chapel Hill, Tennessee, March 1-3, 1971).

ERIC Educational Resources Information Center

Tennessee Univ., Knoxville. Occupational Research and Development Coordinating Unit.

Over 50 educational leaders representing academic and vocational-technical interests met for a 3-day conference to identify curriculum needs and techniques used in curriculum development and to suggest curriculum priorities and coordinated projected plans to attain recommended goals. Conference objectives were accomplished through small group…

United States Air Force Training Line Simulator. Final Report.

ERIC Educational Resources Information Center

Nauta, Franz; Pierce, Michael B.

This report describes the technical aspects and potential applications of a computer-based model simulating the flow of airmen through basic training and entry-level technical training. The objective of the simulation is to assess the impacts of alternative recruit classification and training policies under a wide variety of assumptions regarding…

Multimedia

NASA Technical Reports Server (NTRS)

Kaye, Karen

1993-01-01

Multimedia initiative objectives for the NASA Scientific and Technical Information (STI) program are described. A multimedia classification scheme was developed and the types of non-print media currently in use are inventoried. The NASA STI Program multimedia initiative is driven by a changing user population and technical requirements in the areas of publications, dissemination, and user and management support.

Horry-Georgetown Technical College Summary Report on Institutional Effectiveness.

ERIC Educational Resources Information Center

Wilson, H. Neyle

This document is the Horry-Georgetown Technical College comprehensive assessment of missions, goals, and objectives. The assessment addressed the mission statement of the college as well as its long-term goals. The mission statement was unchanged. In regards to long-term goals for the college, the college deleted one goal that had already been…

Computer Education Curriculum. Connecticut Vocational Technical School System. Version 4.

ERIC Educational Resources Information Center

Kittell, Linda; Walczak, Joseph

This computer education curriculum is designed specifically for Connecticut's Regional Vocational Technical Schools' grade 9 computer education course. Each of the 24 lessons is expected to cover at least one class period of 50 minutes. Introductory materials include a listing of course goals and objectives, an outline of sequence and scope via…

So You "Gotta" Wear Glasses Minicourse, Career Oriented Pre-Technical Physics.

ERIC Educational Resources Information Center

Dallas Independent School District, TX.

This instructional guide, intended for student use, develops the topic of optics through a series of sequential activities. A technical development of the subject is pursued with examples stressing practical aspects of the concepts. Included in the minicourse are: (1) the rationale, (2) terminal behavioral objectives, (3) enabling behavioral…

Cluster: Drafting. Course: Basic Technical Drafting. Research Project.

ERIC Educational Resources Information Center

Sanford - Lee County Schools, NC.

The set of six units is designed for use with an instructor in basic technical drafting and is also keyed to other texts. Each unit contains several task packages specifying prerequisites, rationale for learning, objectives, learning activities to be supervised by the instructor, and learning practice. The units cover: pictorial drawing; screw…

A National Approach to Scientific and Technical Information in the United States.

ERIC Educational Resources Information Center

Becker, Joseph

Over the past 30 years, science has placed great stress on the importance of scientific and technical information (STI) to the individual scientist. The Baker, Crawford, Weinberg, SATCOM, Greenberger, and Conference Board reports extended this objective by emphasizing the need for new supporting methodology and by pointing up the critical…

[The 80-th anniversary of the use of an operating microscope in otorhinolaryngology. Part II. Technical principle and operation of surgical microscope].

PubMed

Mroczkowski, Edward; Wielgosz, Romuald

2004-01-01

The first step to microsurgery is getting to know about technical principle and operation of the surgical microscopes. Special attention is paid to those modules and items of microscopes, which surgeon use most frequently, such as objectives, binocular tubes, eyepieces.

NATIONAL VOCATIONAL-TECHNICAL EDUCATION SEMINAR ON OCCUPATIONAL MOBILITY AND MIGRATION. CENTER SEMINAR AND CONFERENCE REPORT, NUMBER 2.

ERIC Educational Resources Information Center

BEARD, H.G.

THIRTY-THREE STATE-LEVEL LEADERS WITH RESEARCH RESPONSIBILITIES IN VOCATIONAL-TECHNICAL EDUCATION FROM 23 STATES AND TERRITORIES ATTENDED THE SEMINAR WHICH HAD THE OBJECTIVES TO -- (1) SECURE A BETTER UNDERSTANDING OF THE PROBLEMS AND DECISIONS FACING EDUCATIONAL POLICYMAKERS, PROGRAM PLANNERS, ADMINISTRATORS, AND TEACHERS, (2) DEVELOP A…

The SI Metric System and Practical Applications.

ERIC Educational Resources Information Center

Carney, Richard W.

Intended for use in the technical program of a technical institute or community college, this student manual is designed to provide background in the metric system contributing to employability. Nine units are presented with objectives stated for each unit followed by questions or exercises. (Printed answers are supplied when necessary.) Unit 1…

Report of the Education Technical Subcommittee on Food/Beverage Occupations.

ERIC Educational Resources Information Center

Oregon State Dept. of Education, Salem. Div. of Vocational Education.

Written by a technical committee of persons from industry, professional associations, and labor, as well as persons with special expertise, state officials, and educators in Oregon, this document lists the skills and knowledge required of employees in food and beverage occupations. It also identifies the industry standards (performance objectives)…

Utah's Best Project: Behavioral and Educational Strategies for Teachers. Technical Assistance Manuals, Edited Versions.

ERIC Educational Resources Information Center

Reavis, H. Kenton, Ed.; And Others

The 10 Technical Assistance Manuals compiled in this document were produced under cooperative agreements between the Utah State Office of Education and several school districts. Each module, an entity unto itself, is designed to assist classroom teachers with developing behavioral and educational strategies, concentrating on the objectives,…

SURVEY OF INFORMATION ON VOCATIONAL AND TECHNICAL EDUCATION IN THE STATE OF ILLINOIS. FINAL REPORT.

ERIC Educational Resources Information Center

Corplan Associates, Chicago, IL. Technology Center.

THE BASIC OBJECTIVE OF THE SURVEY WAS TO GATHER INFORMATION HELPFUL IN PLANNING AND DEVELOPING VOCATIONAL AND TECHNICAL EDUCATION PRIMARILY WITHIN THE PUBLIC SCHOOL SYSTEM. OCCUPATIONAL NEEDS WERE IDENTIFIED FROM FORECASTS OF CHANGES IN CURRENT OCCUPATIONS, AN ANALYSIS OF THE IMPLICATIONS OF SCIENTIFIC AND TECHNOLOGICAL DEVELOPMENTS, AND…

Engineer's Needs for Scientific and Technical Information.

ERIC Educational Resources Information Center

David, A., Ed.; And Others

This study has as its main object the formulation of an approach, as global and comprehensive as possible, to the multiple aspects of the engineer's needs for scientific and technical information. The basis of the study is an analysis of the engineer's role, its characteristics, different specialties, levels of training, and categories of…

REACTOR PHYSICS QUARTERLY REPORT JANUARY, FEBRUARY, MARCH 1970

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schmid, L. C.; Clayton, E. D.; Heineman, R. E.

1970-05-01

The objective of the Reactor Physics Quarterly Report is to inform the scientific community in a timely manner of the technical progress made on the many phases of reactor physics work within the laboratory. The report contains brief technical discussions of accomplishments in all areas where significant progress has been made during the quarter.

Hanford Environmental Dose Reconstruction Project. Monthly report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cannon, S.D.; Finch, S.M.

1992-10-01

The objective of the Hanford Environmental Dose Reconstruction (HEDR) Project is to estimate the radiation doses that individuals and populations could have received from nuclear operations at Hanford since 1944. The independent Technical Steering Panel (TSP) provides technical direction. The project is divided into the following technical tasks. These tasks correspond to the path radionuclides followed from release to impact on humans (dose estimates):Source Terms, Environmental Transport, Environmental Monitoring Data, Demography, Food Consumption, and Agriculture, and Environmental Pathways and Dose Estimates.

Necessity of creating digital tools to ensure efficiency of technical means

NASA Astrophysics Data System (ADS)

Rakov, V. I.; Zakharova, O. V.

2018-05-01

The authors estimated the problems of functioning of technical objects. The article notes that the increasing complexity of automation systems may lead to an increase of the redundant resource in proportion to the number of components and relationships in the system, and to the need of the redundant resource constant change that can make implementation of traditional structures with redundancy unnecessarily costly (Standby System, Fault Tolerance, High Availability). It proposes the idea of creating digital tools to ensure efficiency of technical facilities.

Technical writing practically unified through industry

NASA Technical Reports Server (NTRS)

Houston, L. S.

1981-01-01

General background details in the development of a university level technical writing program, based upon the writing tasks of the student's occupations, are summarized. Objectives and methods for unifying the courses of study with the needs of industry are discussed. Four academic course divisions, Industries Technologies, in which preparation and training are offered are: Animal, Horticulture, Agriculture, and Agricultural Business. Occupational competence is cited as the main goal for these programs in which technical writing is to be practically unified through industry. Course descriptions are also provided.

Recent Experiences of the NASA Engineering and Safety Center (NESC) Guidance Navigation and Control (GN and C) Technical Discipline Team (TDT)

NASA Technical Reports Server (NTRS)

Dennehy, Cornelius J.

2011-01-01

The NASA Engineering and Safety Center (NESC) is an independently funded NASA Program whose dedicated team of technical experts provides objective engineering and safety assessments of critical, high risk projects. NESC's strength is rooted in the diverse perspectives and broad knowledge base that add value to its products, affording customers a responsive, alternate path for assessing and preventing technical problems while protecting vital human and national resources. The Guidance Navigation and Control (GN&C) Technical Discipline Team (TDT) is one of fifteen such discipline-focused teams within the NESC organization. The TDT membership is composed of GN&C specialists from across NASA and its partner organizations in other government agencies, industry, national laboratories, and universities. This paper will briefly define the vision, mission, and purpose of the NESC organization. The role of the GN&C TDT will then be described in detail along with an overview of how this team operates and engages in its objective engineering and safety assessments of critical NASA.

Knowledge-based graphical interfaces for presenting technical information

NASA Technical Reports Server (NTRS)

Feiner, Steven

1988-01-01

Designing effective presentations of technical information is extremely difficult and time-consuming. Moreover, the combination of increasing task complexity and declining job skills makes the need for high-quality technical presentations especially urgent. We believe that this need can ultimately be met through the development of knowledge-based graphical interfaces that can design and present technical information. Since much material is most naturally communicated through pictures, our work has stressed the importance of well-designed graphics, concentrating on generating pictures and laying out displays containing them. We describe APEX, a testbed picture generation system that creates sequences of pictures that depict the performance of simple actions in a world of 3D objects. Our system supports rules for determining automatically the objects to be shown in a picture, the style and level of detail with which they should be rendered, the method by which the action itself should be indicated, and the picture's camera specification. We then describe work on GRIDS, an experimental display layout system that addresses some of the problems in designing displays containing these pictures, determining the position and size of the material to be presented.

38 CFR 4.73 - Schedule of ratings-muscle injuries.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 5302Group II. Function: Depression of arm from vertical overhead to hanging at side (1, 2); downward... muscles of shoulder girdle: (1) Pectoralis major II (costosternal); (2) latissimus dorsi and teres major (teres major, although technically an intrinsic muscle, is included with latissimus dorsi); (3...

38 CFR 4.73 - Schedule of ratings-muscle injuries.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 5302Group II. Function: Depression of arm from vertical overhead to hanging at side (1, 2); downward... muscles of shoulder girdle: (1) Pectoralis major II (costosternal); (2) latissimus dorsi and teres major (teres major, although technically an intrinsic muscle, is included with latissimus dorsi); (3...

38 CFR 4.73 - Schedule of ratings-muscle injuries.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 5302Group II. Function: Depression of arm from vertical overhead to hanging at side (1, 2); downward... muscles of shoulder girdle: (1) Pectoralis major II (costosternal); (2) latissimus dorsi and teres major (teres major, although technically an intrinsic muscle, is included with latissimus dorsi); (3...

38 CFR 4.73 - Schedule of ratings-muscle injuries.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 5302Group II. Function: Depression of arm from vertical overhead to hanging at side (1, 2); downward... muscles of shoulder girdle: (1) Pectoralis major II (costosternal); (2) latissimus dorsi and teres major (teres major, although technically an intrinsic muscle, is included with latissimus dorsi); (3...

38 CFR 4.73 - Schedule of ratings-muscle injuries.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 5302Group II. Function: Depression of arm from vertical overhead to hanging at side (1, 2); downward... muscles of shoulder girdle: (1) Pectoralis major II (costosternal); (2) latissimus dorsi and teres major (teres major, although technically an intrinsic muscle, is included with latissimus dorsi); (3...

Tinkering and Technical Self-Efficacy of Engineering Students at the Community College

ERIC Educational Resources Information Center

Baker, Dale R.; Wood, Lorelei; Corkins, James; Krause, Stephen

2015-01-01

Self-efficacy in engineering is important because individuals with low self-efficacy have lower levels of achievement and persistence in engineering majors. To examine self-efficacy among community college engineering students, an instrument to specifically measure two important aspects of engineering, tinkering and technical self-efficacy, was…

Automated Coastal Engineering System: Technical Reference

DTIC Science & Technology

1992-09-01

of Contents ACES Technical Reference Wave Transmission Through Permeable Structures ..................................... 5-4 Littoral Processes...A-2 Table A-4: Grain-Size Scales ( Soil Classification) ..................................... A-3 Table A-5: Major Tidal Constituents... Permeable Structures Lonphore Sediment Tranaport Littoral Numerical Si~ulation of Time-Dependent Beach and Dune Erosion Processes Calculation of Composite

Vocational Education and Training: A Major Shift in World Bank Policy.

ERIC Educational Resources Information Center

Foster, Phillip

1992-01-01

Comments on the World Bank's policy paper on vocational and technical education and training. Argues that past failures in establishing effective vocational and technical education were a result of not applying conventional neoclassical economic theory. Asserts that the World Bank's policy paper corrects this approach. (CFR)

Aristotelian Rhetorical Theory as a Framework for Teaching Scientific and Technical Communication.

ERIC Educational Resources Information Center

Newman, Sara

1999-01-01

Describes an upper level rhetorical theory course for Scientific and Technical Communication majors (developed and taught by the author) that is grounded in Aristotle's "On Rhetoric" and in his understanding that effective communication is a systematic "tekhne"/art. Describes how the course uses Aristotle's work as a…

Using a Business Framework to Teach Technical Writing to Nonscientists

ERIC Educational Resources Information Center

Devet, Bonnie

2005-01-01

Today, students other than biology, computer science, or physics majors are enrolling in technical writing. English and communication students, seeking lucrative careers as professional writers or editors, are increasingly signing up for the course. Lacking extensive scientific backgrounds, these students may have a difficult time writing about…

Stressing the Need for Safety in Technical Education

ERIC Educational Resources Information Center

Defore, Jesse j.

1974-01-01

Discusses the importance of a safety orientation program in technical education and major components of a safety-conscious working enviroment. Suggests every institution take such measures as appointment of a safety officer, maintenance of a safety posture, inclusion of safety in curricula, and application of good safety practices. (CC)

A Portable Presentation Package for Audio-Visual Instruction. Technical Documentary Report.

ERIC Educational Resources Information Center

Smith, Edgar A.; And Others

The Portable Presentation Package is a prototype of an audiovisual equipment package designed to facilitate technical training in remote areas, situations in which written communications are difficult, or in situations requiring rapid presentation of instructional material. The major criteria employed in developing the package were (1) that the…

RL-34 ring laser gyro laboratory evaluation for the Deep Space Network antenna application

NASA Technical Reports Server (NTRS)

1991-01-01

The overall results of this laboratory evaluation are quite encouraging. The gyro data is in good agreement with the system's overall pointing performance, which is quite close to the technical objectives for the Deep Space Network (DSN) application. The system can be calibrated to the levels required for millidegree levels of pointing performance, and initialization performance is within the required 0.001 degree objective. The blind target acquisition performance is within a factor of two of the 0.0001 degree objective, limited only by a combination of the slow rate (0.5 deg/sec) and the existing production quantization logic (0.38 arc-sec/pulse). Logic circuitry exists to better this performance such that it will better the objective by 50 percent. Representative data with this circuitry has been provided for illustration. Target tracking performance is about twice the one millidegree objective, with several factors contributing. The first factor is the bias stability of the gyros, which is exceptional, but will limit performance to the 0.001 and 0.002 degree range for long tracking periods. The second contributing factor is the accelerometer contributions when the system is elevated. These degrade performance into the 0.003 to 0.004 degree range, which could be improved upon with some additional changes. Finally, we have provided a set of recommendations to improve performance closer to the technical objectives. These recommendations include gyro, electronics, and system configurational changes that form the basis for additional work to achieve the desired performance. In conclusion, we believe that the RL-34 ring laser gyro-based advanced navigation system demonstrated performance consistent with expectations and technical objectives, and it has the potential for even further enhancement for the DSN application.

The Use of Minimum Objectives in Curriculum Research and Development, 1975-1976. Technical Report #45.

ERIC Educational Resources Information Center

Crowell, Doris

This report describes a curriculum, based on stated performance objectives, which was developed and implemented by the Kamehameha Early Education Program (KEEP). The structure of the mathematics and reading curriculum is described briefly and the use of performance objectives in evaluating student progress is discussed. Advantages of the…

A Framework for the Flexible Content Packaging of Learning Objects and Learning Designs

ERIC Educational Resources Information Center

Lukasiak, Jason; Agostinho, Shirley; Burnett, Ian; Drury, Gerrard; Goodes, Jason; Bennett, Sue; Lockyer, Lori; Harper, Barry

2004-01-01

This paper presents a platform-independent method for packaging learning objects and learning designs. The method, entitled a Smart Learning Design Framework, is based on the MPEG-21 standard, and uses IEEE Learning Object Metadata (LOM) to provide bibliographic, technical, and pedagogical descriptors for the retrieval and description of learning…

NASA Scientific and Technical Publications: A Catalog of Special Publications, Reference Publications, Conference Publications, and Technical Papers 1987-1990

DTIC Science & Technology

1991-02-01

Technical Papers present the results of significant research conducted by NASA scientists and engineers. Presented here are citations for reports from each...CSCL contains photographs of 322 galaxies including the majority of all 03A Shapley-Ames bright galaxies, plus cluster members in the Virgo A...Catalog of Open Clusters and Associated Interstellar Matter Research Council, London, United Kingdom Sponsored by NASA, summarizes observations of 128 open

What does a Performance Measurement System Tell Us about the National Comprehensive Cancer Control Program?

PubMed Central

Townsend, Julie S.; Moore, Angela R.; Mulder, Tiffani N.; Boyd, Mary

2015-01-01

Context The National Comprehensive Cancer Control Program (NCCCP) performance measurement system seeks to understand both the processes that funded programs undertake with their respective coalitions to implement the objectives of their cancer plans and outcomes of those efforts. Objective To identify areas of achievement and technical assistance needs of NCCCP awardees. Design Program performance was assessed through surveys completed by program directors on performance indicators in 2009 and 2010 and queries from a web-based management information system in 2011 and 2012. Setting Programs funded by CDC’s NCCCP. Participants 69 programs. Main Outcome Measure(s) The key performance measures assessed were: inclusion of diverse partners and key sectors in cancer coalitions; partners’ involvement in activities; receiving in-kind resources from partners; using evidence-based interventions and data for setting priorities; conducting program evaluation; using community- or organization-level strategies to address cancer control efforts; and demonstrating progress toward achieving health outcomes. Results Most programs reported having active coalitions that represent diverse organizational sectors. Nearly all programs routinely assess the burden of cancer. In-kind resources to implement activities peaked at $64,716 in the second year of a five year funding cycle, and declined in subsequent project years. By year 3, over 70% of programs reported having an evaluation plan. While programs reported that nearly two-thirds of their interventions were evidence-based, some programs implemented non-evidence-based interventions. A majority of programs successfully used at least one community- or organization-level change strategy. However, many programs did not incorporate objectives linked to health outcomes as they reported progress in implementing interventions. Conclusions: While NCCCP programs were strong at building and maintaining infrastructure, some programs may need additional technical assistance to increase the adoption of evidence-based interventions, develop solid and responsive evaluation plans, and better link efforts to population-based measures that demonstrate impact toward reducing the burden of cancer. PMID:25136936

Cryogenics for HL-LHC

NASA Astrophysics Data System (ADS)

Tavian, L.; Brodzinski, K.; Claudet, S.; Ferlin, G.; Wagner, U.; van Weelderen, R.

The discovery of a Higgs boson at CERN in 2012 is the start of a major program of work to measure this particle's properties with the highest possible precision for testing the validity of the Standard Model and to search for further new physics at the energy frontier. The LHC is in a unique position to pursue this program. Europe's top priority is the exploitation of the full potential of the LHC, including the high-luminosity upgrade of the machine and detectors with an objective to collect ten times more data than in the initial design, by around 2030. To reach this objective, the LHC cryogenic system must be upgraded to withstand higher beam current and higher luminosity at top energy while keeping the same operation availability by improving the collimation system and the protection of electronics sensitive to radiation. This chapter will present the conceptual design of the cryogenic system upgrade with recent updates in performance requirements, the corresponding layout and architecture of the system as well as the main technical challenges which have to be met in the coming years.

Conceptual Design of the Cryogenic System for the High-luminosity Upgrade of the Large Hadron Collider (LHC)

NASA Astrophysics Data System (ADS)

Brodzinski, K.; Claudet, S.; Ferlin, G.; Tavian, L.; Wagner, U.; Van Weelderen, R.

The discovery of a Higgs boson at CERN in 2012 is the start of a major program of work to measure this particle's properties with the highest possible precision for testing the validity of the Standard Model and to search for further new physics at the energy frontier. The LHC is in a unique position to pursue this program. Europe's top priority is the exploitation of the full potential of the LHC, including the high-luminosity upgrade of the machine and detectors with an objective to collect ten times more data than in the initial design, by around 2030. To reach this objective, the LHC cryogenic system must be upgraded to withstand higher beam current and higher luminosity at top energy while keeping the same operation availability by improving the collimation system and the protection of electronics sensitive to radiation. This paper will present the conceptual design of the cryogenic system upgrade with recent updates in performance requirements, the corresponding layout and architecture of the system as well as the main technical challenges which have to be met in the coming years.

The DAWN Project's Transition to Mission Operations: on Its Way to Rendezvous with (4) Vesta and (1) Ceres

NASA Technical Reports Server (NTRS)

Rayman, Marc D.; Patel, Keyur C.

2008-01-01

Dawn launched on 27 September 2007 on a mission to orbit main belt asteroids (4) Vesta in 2011 - 2012 and (1) Ceres in 2015. The operations team conducted an extensive set of assessments of the engineering subsystems and science instruments during the first 80 days of the mission. A major objective of this period was to thrust for one week with the ion propulsion system to verify flight and ground systems readiness for typical interplanetary operations. Upon successful conclusion of the checkout phase, the interplanetary cruise phase began, most of which will be devoted to thrusting. The flexibility afforded by the use of ion propulsion enabled the project to accommodate a launch postponement of more than 3 months caused by a combination of launch vehicle and tracking system readiness, unfavorable weather, and then conflicts with other launches. Even with the shift in the launch date, all of the science objectives are retained with the same schedule and greater technical margins. This paper describes the conclusion of the development phase of the project, launch operations, and the progress of mission operations.

Developing and Validating the Socio-Technical Model in Ontology Engineering

NASA Astrophysics Data System (ADS)

Silalahi, Mesnan; Indra Sensuse, Dana; Giri Sucahyo, Yudho; Fadhilah Akmaliah, Izzah; Rahayu, Puji; Cahyaningsih, Elin

2018-03-01

This paper describes results from an attempt to develop a model in ontology engineering methodology and a way to validate the model. The approach to methodology in ontology engineering is from the point view of socio-technical system theory. Qualitative research synthesis is used to build the model using meta-ethnography. In order to ensure the objectivity of the measurement, inter-rater reliability method was applied using a multi-rater Fleiss Kappa. The results show the accordance of the research output with the diamond model in the socio-technical system theory by evidence of the interdependency of the four socio-technical variables namely people, technology, structure and task.

Global anthropogenic methane emissions 2005-2030: technical mitigation potentials and costs

NASA Astrophysics Data System (ADS)

Höglund-Isaksson, L.

2012-10-01

This paper presents estimates of current and future global anthropogenic methane emissions, their technical mitigation potential and associated costs for the period 2005 to 2030. The analysis uses the GAINS model framework to estimate emissions, mitigation potentials and costs for all major sources of anthropogenic methane for 83 countries/regions, which are aggregated to produce global estimates. Global emissions are estimated at 323 Mt methane in 2005, with an expected increase to 414 Mt methane in 2030. The technical mitigation potential is estimated at 195 Mt methane in 2030, whereof about 80 percent is found attainable at a marginal cost less than 20 Euro t-1 CO2eq when using a social planner cost perspective. With a private investor cost perspective, the corresponding fraction is only 30 percent. Major uncertainty sources in emission estimates are identified and discussed.

Reflections On The Feasibility and Implications of The Eu Water Framework Directive

NASA Astrophysics Data System (ADS)

Bauwens, W.; Goethals, P. L. M.

The Water Framework Directive (WFD) raises a lot of challenges: the complexity of the text and the diversity of possible solutions to the problems, the timetable for implementation, the incomplete technical and scientific basis, the limitation of human and financial resources,... The paper addresses a number of the key challenges from a technical-scientific, socio-economic and ethical point of view. From a technical-scientific point of view, the major problems are related to the def- inition of the reference conditions and to the simulation tools that will be needed to predict the impact of the River Basin Management Plans. The proper definition of the system of objectives (the reference conditions and the al- lowed deviation from those conditions) throughout the EU has to be considered as one of the key issues of the WFD and remains to be done. Extensive research is actually carried out, both with respect to the conceptual considerations as with respect to the definition of the ecological status. The emphasis that the 5th Research Framework Programme put on the development of integrated simulation models illustrates the need for a further development of such tools. While many models exist for dealing with sub-components of the system (flows, point pollution sources, diffuse pollution, ecosystem models,...) the integration and the adequate model structure and process representation remain major scientific issues. Especially the link between the physico-chemistry and the ecosystem modelling can still be considered to be in its infancy. More research is also needed on the issues of the calibration and the uncertainty of such complex integrated models. It should also be mentioned that the actual - and future - quality monitoring programs in most countries are by far insufficient for the calibration of complex, dynamic quality models. The objective of the WFD is to obtain, in all water bodies in the EU, an ecological quality that is close to the reference or pristine conditions. The rationale behind this definition of the objective is that it allows a harmonisation of the regulation in the EU, hereby accounting for the large diversity of climatologic and geo-physical conditions in the different regions. A fundamental issue that has been neglected when opting for this definition, however, relates to the role of men in the environment. As a conse- 1 quence, regions with an inhabitant density of 500 inhabitants per square km (ISQ) have to reach the same objectives as regions with a density of 50 ISQ. The full cost of the implementation of the WFD is yet unknown, but it will be high to very high, depending on the final definition of the objectives. With respect to the latter, it would be good to keep in mind the economic principle of the lesser return. While the WFD recognises that the water problems should be dealt with in an in- tegrated and holistic way, one may wonder if the integrated approach should not be applied to the environment as a whole. From this point of view, and accounting for the limited resources available, the setting of the objectives with regard to the water environment to an extremely high level may be questioned. The question that hereby arises relates to the definition of the priorities with regard to the allocation of the lim- ited resources for the different environmental problems in and outside the EU. Finally, one should be attentive to the consequences of the WFD on the socio- economic situation and priorities in the EU, in the candidate countries and in the developing world. Especially with regard to developing countries, one can indeed ob- serve that the environmental policy of the EU is used more and more as an economic weapon. Imposing the WFD on these countries would pose severe ethical questions. 2

The College Mathematics Experience and Changes in Majors: A Structural Model Analysis.

ERIC Educational Resources Information Center

Whiteley, Meredith A.; Fenske, Robert H.

1990-01-01

Testing of a structural equation model with college mathematics experience as the focal variable in 745 students' final decisions concerning major or dropping out over 4 years of college yielded separate model estimates for 3 fields: scientific/technical, quantitative business, and business management majors. (Author/MSE)

Overall Control on Solid Rocket Motor Hazard Zone: Example of VEGA an Innovative Solution at System Level

NASA Astrophysics Data System (ADS)

Vertueux, M.

2013-09-01

The arrival of additional Space launch vehicles Soyouz and Vega in Guiana Space Center facilities faced a new ground range safety major question: The technical hazards assessment and management related to the preparation of these three launchers simultaneously with the same high level of safety. The objective of this publication is to highlight the new safety solutions that are applied in CSG to reduce the risk of self-propulsion of the stages of VEGA launcher. During all the preparation campaign of VEGA launch vehicle, the explosive risk due to the use of solid propellant is permanent. Uncontrolled propulsion of a solid rocket motor is capable of destruction of other important installations with catastrophic effects. This event could cause loss of human lives and great damages to the CSG launch site structures. Early in the space program development phases of VEGA, the risk of self- propulsion of solid rocket motors and the solutions to avoid the "domino effects" on neighboring facilities have been issued as one of the major concern in term of safety.

Coordination and Integration of Global Ocean Observing through JCOMM

NASA Astrophysics Data System (ADS)

Legler, D. M.; Meldrum, D. T.; Hill, K. L.; Charpentier, E.

2016-02-01

The primary objective of the JCOMM Observations Coordination Group (OCG) is to provide technical coordination to implement fully integrated ocean observing system across the entire marine meteorology and oceanographic community. JCOMM OCG works in partnership with the Global Ocean Observing System, , which focusses on setting observing system requirements and conducting evalutions. JCOMM OCG initially focused on major global observing networks (e.g. Argo profiling floats, moored buoys, ship based observations, sea level stations, reference sites, etc), and is now expanding its horizon in recognition of new observing needs and new technologies/networks (e.g. ocean gliders). Over the next five years the JCOMM OCG is focusing its attention on integration and coordination in four major areas: observing network implementation particularly in response to integrated ocean observing requirements; observing system monitoring and metrics; standards and best practices; and improving integrated data management and access. This presentation will describe the scope and mission of JCOMM OCG; summarize the state of the global ocean observing system; highlight recent successes and resources for the research, prediction, and assessment communities; summarize our plans for the next several years; and suggest engagement opportunities.

PESI - a taxonomic backbone for Europe.

PubMed

de Jong, Yde; Kouwenberg, Juliana; Boumans, Louis; Hussey, Charles; Hyam, Roger; Nicolson, Nicola; Kirk, Paul; Paton, Alan; Michel, Ellinor; Guiry, Michael D; Boegh, Phillip S; Pedersen, Henrik Ærenlund; Enghoff, Henrik; von Raab-Straube, Eckhard; Güntsch, Anton; Geoffroy, Marc; Müller, Andreas; Kohlbecker, Andreas; Berendsohn, Walter; Appeltans, Ward; Arvanitidis, Christos; Vanhoorne, Bart; Declerck, Joram; Vandepitte, Leen; Hernandez, Francisco; Nash, Róisín; Costello, Mark John; Ouvrard, David; Bezard-Falgas, Pascale; Bourgoin, Thierry; Wetzel, Florian Tobias; Glöckler, Falko; Korb, Günther; Ring, Caroline; Hagedorn, Gregor; Häuser, Christoph; Aktaç, Nihat; Asan, Ahmet; Ardelean, Adorian; Borges, Paulo Alexandre Vieira; Dhora, Dhimiter; Khachatryan, Hasmik; Malicky, Michael; Ibrahimov, Shaig; Tuzikov, Alexander; De Wever, Aaike; Moncheva, Snejana; Spassov, Nikolai; Chobot, Karel; Popov, Alexi; Boršić, Igor; Sfenthourakis, Spyros; Kõljalg, Urmas; Uotila, Pertti; Olivier, Gargominy; Dauvin, Jean-Claude; Tarkhnishvili, David; Chaladze, Giorgi; Tuerkay, Michael; Legakis, Anastasios; Peregovits, László; Gudmundsson, Gudmundur; Ólafsson, Erling; Lysaght, Liam; Galil, Bella Sarah; Raimondo, Francesco M; Domina, Gianniantonio; Stoch, Fabio; Minelli, Alessandro; Spungis, Voldermars; Budrys, Eduardas; Olenin, Sergej; Turpel, Armand; Walisch, Tania; Krpach, Vladimir; Gambin, Marie Therese; Ungureanu, Laurentia; Karaman, Gordan; Kleukers, Roy M J C; Stur, Elisabeth; Aagaard, Kaare; Valland, Nils; Moen, Toril Loennechen; Bogdanowicz, Wieslaw; Tykarski, Piotr; Węsławski, Jan Marcin; Kędra, Monika; M de Frias Martins, Antonio; Abreu, António Domingos; Silva, Ricardo; Medvedev, Sergei; Ryss, Alexander; Šimić, Smiljka; Marhold, Karol; Stloukal, Eduard; Tome, Davorin; Ramos, Marian A; Valdés, Benito; Pina, Francisco; Kullander, Sven; Telenius, Anders; Gonseth, Yves; Tschudin, Pascal; Sergeyeva, Oleksandra; Vladymyrov, Volodymyr; Rizun, Volodymyr Bohdanovych; Raper, Chris; Lear, Dan; Stoev, Pavel; Penev, Lyubomir; Rubio, Ana Casino; Backeljau, Thierry; Saarenmaa, Hannu; Ulenberg, Sandrine

2015-01-01

Reliable taxonomy underpins communication in all of biology, not least nature conservation and sustainable use of ecosystem resources. The flexibility of taxonomic interpretations, however, presents a serious challenge for end-users of taxonomic concepts. Users need standardised and continuously harmonised taxonomic reference systems, as well as high-quality and complete taxonomic data sets, but these are generally lacking for non-specialists. The solution is in dynamic, expertly curated web-based taxonomic tools. The Pan-European Species-directories Infrastructure (PESI) worked to solve this key issue by providing a taxonomic e-infrastructure for Europe. It strengthened the relevant social (expertise) and information (standards, data and technical) capacities of five major community networks on taxonomic indexing in Europe, which is essential for proper biodiversity assessment and monitoring activities. The key objectives of PESI were: 1) standardisation in taxonomic reference systems, 2) enhancement of the quality and completeness of taxonomic data sets and 3) creation of integrated access to taxonomic information. This paper describes the results of PESI and its future prospects, including the involvement in major European biodiversity informatics initiatives and programs.

[Major rural accident: the pesticide "rain" case in Lucas do Rio Verde city - MT].

PubMed

Pignati, Wanderlei Antonio; Machado, Jorge M H; Cabral, James F

2007-01-01

The article reports the environmental accident caused by aerial pesticide spraying that reached the urban space of Lucas do Rio Verde-MT, in March 2006. It was characterized as a "major rural accident" of environmental and occupational aspects whose seriousness and extension crossed the agriculturally productive unit boundaries causing sanitary, social and environmental impact. This case study had as its objective the understanding of the social-technical scene of the accident and the monitoring process in health-environment in a research-action dynamic. The information was collected through interviews, documents and daily observation reports. It also referred to accidents, multidisciplinary and participatory analyses with the participation of local institutions of health, agriculture and environment, political and union leaderships, ranchers and farmers, the public prosecutor's office, journalists and the University. The study shows that the pesticide "use and abuse" monitoring actions have been extended to [a] "movement for the sustainable development of the region" supported by the participative monitoring and the fight for democracy and social justice in the search of a sustainable agriculture and/or environment.

PESI - a taxonomic backbone for Europe

PubMed Central

Kouwenberg, Juliana; Boumans, Louis; Hussey, Charles; Hyam, Roger; Nicolson, Nicola; Kirk, Paul; Paton, Alan; Michel, Ellinor; Guiry, Michael D.; Boegh, Phillip S.; Pedersen, Henrik Ærenlund; Enghoff, Henrik; von Raab-Straube, Eckhard; Güntsch, Anton; Geoffroy, Marc; Müller, Andreas; Kohlbecker, Andreas; Berendsohn, Walter; Appeltans, Ward; Arvanitidis, Christos; Vanhoorne, Bart; Declerck, Joram; Vandepitte, Leen; Hernandez, Francisco; Nash, Róisín; Costello, Mark John; Ouvrard, David; Bezard-Falgas, Pascale; Bourgoin, Thierry; Wetzel, Florian Tobias; Glöckler, Falko; Korb, Günther; Ring, Caroline; Hagedorn, Gregor; Häuser, Christoph; Aktaç, Nihat; Asan, Ahmet; Ardelean, Adorian; Borges, Paulo Alexandre Vieira; Dhora, Dhimiter; Khachatryan, Hasmik; Malicky, Michael; Ibrahimov, Shaig; Tuzikov, Alexander; De Wever, Aaike; Moncheva, Snejana; Spassov, Nikolai; Chobot, Karel; Popov, Alexi; Boršić, Igor; Sfenthourakis, Spyros; Kõljalg, Urmas; Uotila, Pertti; Olivier, Gargominy; Dauvin, Jean-Claude; Tarkhnishvili, David; Chaladze, Giorgi; Tuerkay, Michael; Legakis, Anastasios; Peregovits, László; Gudmundsson, Gudmundur; Ólafsson, Erling; Lysaght, Liam; Galil, Bella Sarah; Raimondo, Francesco M.; Domina, Gianniantonio; Stoch, Fabio; Minelli, Alessandro; Spungis, Voldermars; Budrys, Eduardas; Olenin, Sergej; Turpel, Armand; Walisch, Tania; Krpach, Vladimir; Gambin, Marie Therese; Ungureanu, Laurentia; Karaman, Gordan; Kleukers, Roy M.J.C.; Stur, Elisabeth; Aagaard, Kaare; Valland, Nils; Moen, Toril Loennechen; Bogdanowicz, Wieslaw; Tykarski, Piotr; Węsławski, Jan Marcin; Kędra, Monika; M. de Frias Martins, Antonio; Abreu, António Domingos; Silva, Ricardo; Medvedev, Sergei; Ryss, Alexander; Šimić, Smiljka; Marhold, Karol; Stloukal, Eduard; Tome, Davorin; Ramos, Marian A.; Valdés, Benito; Pina, Francisco; Kullander, Sven; Telenius, Anders; Gonseth, Yves; Tschudin, Pascal; Sergeyeva, Oleksandra; Vladymyrov, Volodymyr; Rizun, Volodymyr Bohdanovych; Raper, Chris; Lear, Dan; Stoev, Pavel; Penev, Lyubomir; Rubio, Ana Casino; Backeljau, Thierry; Saarenmaa, Hannu; Ulenberg, Sandrine

2015-01-01

Abstract Background Reliable taxonomy underpins communication in all of biology, not least nature conservation and sustainable use of ecosystem resources. The flexibility of taxonomic interpretations, however, presents a serious challenge for end-users of taxonomic concepts. Users need standardised and continuously harmonised taxonomic reference systems, as well as high-quality and complete taxonomic data sets, but these are generally lacking for non-specialists. The solution is in dynamic, expertly curated web-based taxonomic tools. The Pan-European Species-directories Infrastructure (PESI) worked to solve this key issue by providing a taxonomic e-infrastructure for Europe. It strengthened the relevant social (expertise) and information (standards, data and technical) capacities of five major community networks on taxonomic indexing in Europe, which is essential for proper biodiversity assessment and monitoring activities. The key objectives of PESI were: 1) standardisation in taxonomic reference systems, 2) enhancement of the quality and completeness of taxonomic data sets and 3) creation of integrated access to taxonomic information. New information This paper describes the results of PESI and its future prospects, including the involvement in major European biodiversity informatics initiatives and programs. PMID:26491393

Production of biosolid fuels from municipal sewage sludge: Technical and economic optimisation.

PubMed

Wzorek, Małgorzata; Tańczuk, Mariusz

2015-08-01

The article presents the technical and economic analysis of the production of fuels from municipal sewage sludge. The analysis involved the production of two types of fuel compositions: sewage sludge with sawdust (PBT fuel) and sewage sludge with meat and bone meal (PBM fuel). The technology of the production line of these sewage fuels was proposed and analysed. The main objective of the study is to find the optimal production capacity. The optimisation analysis was performed for the adopted technical and economic parameters under Polish conditions. The objective function was set as a maximum of the net present value index and the optimisation procedure was carried out for the fuel production line input capacity from 0.5 to 3 t h(-1), using the search step 0.5 t h(-1). On the basis of technical and economic assumptions, economic efficiency indexes of the investment were determined for the case of optimal line productivity. The results of the optimisation analysis show that under appropriate conditions, such as prices of components and prices of produced fuels, the production of fuels from sewage sludge can be profitable. In the case of PBT fuel, calculated economic indexes show the best profitability for the capacity of a plant over 1.5 t h(-1) output, while production of PBM fuel is beneficial for a plant with the maximum of searched capacities: 3.0 t h(-1). Sensitivity analyses carried out during the investigation show that influence of both technical and economic assessments on the location of maximum of objective function (net present value) is significant. © The Author(s) 2015.

Mechanochemical endovenous ablation of saphenous veins using the ClariVein: A systematic review.

PubMed

Witte, Marianne E; Zeebregts, Clark J; de Borst, Gert Jan; Reijnen, Michel M P J; Boersma, Doeke

2017-12-01

Objective To systematically review all available English literature on mechanochemical endovenous ablation and to report on the anatomical, technical, and clinical success. Methods A systematic literature search was performed in PubMed, EMBASE, and the Cochrane Library on mechanochemical endovenous ablation for the treatment of insufficient great and/or small saphenous vein. Methodological quality of the included studies was evaluated using the MINORS score. The primary outcome measure was anatomical success, defined as closure of the treated vein on follow-up duplex ultrasound imaging. Secondary outcomes were technical and clinical success, and major complications defined as deep venous thrombosis, pulmonary embolisms or paresthesia. Results The literature search identified 759 records, of which 13 were included, describing 10 unique cohorts. A total of 1521 veins (1267 great saphenous vein and 254 small saphenous vein) were included, with cohort sizes ranging from 30 to 570 veins. The pooled anatomical success rate after short-term follow up was 92% (95% CI 90-94%) ( n = 1314 veins). After 6 and 12 months these numbers were 92% (95% CI 88-95%) ( n = 284) and 91% (95% CI 86-94%) ( n = 228), respectively. The long-term anatomical success rates at 2 and 3 years were 91% (95% CI 85-95%) ( n = 136) and 87% (95% CI 75-94%) ( n = 48), respectively. Major complications and especially nerve injury were very rare (≤ 0.2%). All studies were of moderate or good quality using the MINORS scoring scale. Conclusions Mechanochemical endovenous ablation using the ClariVein in combination with liquid sclerosant is associated with an anatomical success rate ranging from 87% to 92% and good clinical success. To date, no randomized controlled trials are available studying the anatomical success after mechanochemical ablation, compared to the endothermal ablation. The risk of major complications is very low after the procedure.

Technical Assistance to Developers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rockward, Tommy; Borup, Rodney L.; Garzon, Fernando H.

2012-07-17

This task supports the allowance of technical assistance to fuel-cell component and system developers as directed by the DOE. This task includes testing of novel materials and participation in the further development and validation of single cell test protocols. This task also covers technical assistance to DOE Working Groups, the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Driving Research and Innovation for Vehicle efficiency and Energy sustainability (U.S. Drive) Fuel Cell Technology Team. Assistance includes technical validation of new fuel cell materials and methods, single cell fuel cell testing to support the development of targets and test protocols,more » and regular advisory participation in other working groups and reviews. This assistance is made available to PEM fuel cell developers by request and DOE Approval. The objectives are to: (1) Support technically, as directed by DOE, fuel cell component and system developers; (2) Assess fuel cell materials and components and give feedback to developers; (3) Assist the DOE Durability Working Group with the development of various new material durability Testing protocols; and (4) Provide support to the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Fuel Cell Technology Team. FY2012 specific technical objectives are: (1) Evaluate novel MPL materials; (2) Develop of startup/ shutdown protocol; (3) Test the impact of hydrophobic treatment on graphite bi-polar plates; (4) Perform complete diagnostics on metal bi-polar plates for corrosion; and (5) Participate and lead efforts in the DOE Working Groups.« less

First annual report SHRP C103 task 4 : rapid repair techniques.

DOT National Transportation Integrated Search

1989-01-01

The objective of task four is to develop technically and economically feasible methods of concrete bridge deck protection, rehabilitation, and replacement. The objective of the task will be accomplished through a progression of six subtasks. The subt...

48 CFR 15.406-1 - Prenegotiation objectives.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the results of the contracting officer's analysis of the offeror's proposal, taking into consideration all pertinent information including field pricing assistance, audit reports and technical analysis... and depth of the analysis supporting the objectives should be directly related to the dollar value...

Aluminum Rich Epoxy Primer for Ground and Air Vehicles

DTIC Science & Technology

2017-03-01

UNCLASSIFIED DOCUMENT Aluminum Rich Epoxy Primer for Ground and Air Vehicles Monthly Technical Report for the Period: January 20, 2017...Objective: To further develop the Aluminum Rich Epoxy Primer systems for Air and Ground Vehicles while addressing the objective requirements

48 CFR 15.406-1 - Prenegotiation objectives.

Code of Federal Regulations, 2011 CFR

2011-10-01

... the results of the contracting officer's analysis of the offeror's proposal, taking into consideration all pertinent information including field pricing assistance, audit reports and technical analysis... and depth of the analysis supporting the objectives should be directly related to the dollar value...

Evaluation of stone/RAP interlayers under accelerated loading : technical summary.

DOT National Transportation Integrated Search

2008-08-01

The primary objective of this study was to determine the effectiveness of using an untreated RAP interlayer in lieu of a stone interlayer in a soil-cement asphalt pavement structure under accelerated loading. The secondary objective was to investigat...

Random lattice structures. Modelling, manufacture and FEA of their mechanical response

NASA Astrophysics Data System (ADS)

Maliaris, G.; Sarafis, I. T.; Lazaridis, T.; Varoutoglou, A.; Tsakataras, G.

2016-11-01

The implementation of lightweight structures in various applications, especially in Aerospace/ Automotive industries and Orthopaedics, has become a necessity due to their exceptional mechanical properties with respect to reduced weight. In this work we present a Voronoi tessellation based algorithm, which has been developed for modelling stochastic lattice structures. With the proposed algorithm, is possible to generate CAD geometry with controllable structural parameters, such as porosity, cell number and strut thickness. The digital structures were transformed into physical objects through the combination of 3D printing technics and investment casting. This process was applied to check the mechanical behaviour of generated digital models. Until now, the only way to materialize such structures into physical objects, was feasible through 3D printing methods such as Selective Laser Sintering/ Melting (SLS/ SLM). Investment casting possesses numerous advantages against SLS or SLA, with the major one being the material variety. On the other hand, several trials are required in order to calibrate the process parameters to have successful castings, which is the major drawback of investment casting. The manufactured specimens were subjected to compression tests, where their mechanical response was registered in the form of compressive load - displacement curves. Also, a finite element model was developed, using the specimens’ CAD data and compression test parameters. The FE assisted calculation of specimen plastic deformation is identical with the one of the physical object, which validates the conclusions drawn from the simulation results. As it was observed, strut contact is initiated when specimen deformation is approximately 5mm. Although FE calculated compressive force follows the same trend for the first 3mm of compression, then diverges because of the elasto-plastic FE model type definition and the occurred remeshing steps.

A prototype for the PASS Permanent All Sky Survey

NASA Astrophysics Data System (ADS)

Deeg, H. J.; Alonso, R.; Belmonte, J. A.; Horne, K.; Alsubai, K.; Collier Cameron, A.; Doyle, L. R.

2004-10-01

A prototype system for the Permanent All Sky Survey (PASS) project is presented. PASS is a continuous photometric survey of the entire celestial sphere with a high temporal resolution. Its major objectives are the detection of all giant-planet transits (with periods up to some weeks) across stars up to mag 10.5, and to deliver continuously photometry that is useful for the study of any variable stars. The prototype is based on CCD cameras with short focal length optics on a fixed mount. A small dome to house it at Teide Observatory, Tenerife, is currently being constructed. A placement at the antarctic Dome C is also being considered. The prototype will be used for a feasibility study of PASS, to define the best observing strategies, and to perform a detailed characterization of the capabilities and scope of the survey. Afterwards, a first partial sky surveying will be started with it. That first survey may be able to detect transiting planets during its first few hundred hours of operation. It will also deliver a data set around which software modules dealing with the various scientific objectives of PASS will be developed. The PASS project is still in its early phase and teams interested in specific scientific objectives, in providing technical expertise, or in participating with own observations are invited to collaborate.

Establishing Mandatory Academic Degree Guidance for AFROTC (Air Force Reserve Officer Training Corps) Rated Officer Accessions

DTIC Science & Technology

1984-04-01

Scientific- Architecture 4% 4% Technical Computer Sci 38% 37% Math 40% 40% Meteorology 6% 6% Physics 12 % 13% Nontechnical Quality Freeflow 2/ Quality...Architecture 4 Computer Sci 48 43 40 Math 30 35 38 Meteorology 6 6 6 Physics 12 12 12 Engineer Electrical 40% 50% 50% Aero Group 25 25 30 Other / 35 25 20...with Technical Degrees by Major Weapon System. . . 12 FIGURE 4 - Pilots with Technical Degrees by Category . . . . . . 13 FIGURE 5 - Regression

25 CFR 547.14 - What are the minimum technical standards for electronic random number generation?

Code of Federal Regulations, 2011 CFR

2011-04-01

... CLASS II GAMES § 547.14 What are the minimum technical standards for electronic random number generation... rules of the game. For example, if a bingo game with 75 objects with numbers or other designations has a... serial correlation (outcomes shall be independent from the previous game); and (x) Test on subsequences...

25 CFR 547.14 - What are the minimum technical standards for electronic random number generation?

Code of Federal Regulations, 2012 CFR

2012-04-01

... CLASS II GAMES § 547.14 What are the minimum technical standards for electronic random number generation... rules of the game. For example, if a bingo game with 75 objects with numbers or other designations has a... serial correlation (outcomes shall be independent from the previous game); and (x) Test on subsequences...

25 CFR 547.14 - What are the minimum technical standards for electronic random number generation?

Code of Federal Regulations, 2010 CFR

2010-04-01

... CLASS II GAMES § 547.14 What are the minimum technical standards for electronic random number generation... rules of the game. For example, if a bingo game with 75 objects with numbers or other designations has a... serial correlation (outcomes shall be independent from the previous game); and (x) Test on subsequences...

Forest health monitoring: 2008 national technical report

Treesearch

Kevin M. Potter; Barbara L. Conkling

2012-01-01

The Forest Health Monitoring (FHM) Program’s annual national technical report has three objectives: (1) to present forest health status and trends from a national or a multi-State regional perspective using a variety of sources, (2) to introduce new techniques for analyzing forest health data, and (3) to report results of recently completed evaluation monitoring...

Man in the North Technical Paper. Education in the Canadian North, Report Two: Apprentice Teachers.

ERIC Educational Resources Information Center

Brown, Doug; And Others

The objective of this applied research project was to evaluate a formula by which young native Canadians would become teachers through in-service training coupled with academic upgrading. The experiment design paired apprentice and cooperating teachers, provided technical help, planned a schedule of activities for the apprentice, and assessed the…

Scientific and Technical Information and Transfer for Education (STITE). Research Report No. 1.

ERIC Educational Resources Information Center

Zunde, Pranas

STITE (Scientific and Technical Information Transfer for Education) is basically a system to interface between science information and the science learner. As such STITE acts as a link between STIC (Science and Technology Information Centers) and LIS (Learning Information Systems). After an introduction to the goals and objectives of the ongoing…

Evaluation of the Industrial Maintenance Program at Caldwell Community College and Technical Institute.

ERIC Educational Resources Information Center

Pipes, V. David

In 1982-83, a study was conducted at Caldwell Community College and Technical Institute to determine whether the objectives of the Industrial Maintenance Program were being met, to measure program success, and to identify aspects needing improvement. Surveys were sent to 30 students who graduated from the program before 1978, yielding a 57%…

Constraints Militating against the Implementation of Production/Service Work in Technical Colleges in North Central Nigeria

ERIC Educational Resources Information Center

Agu, Peter A.

2016-01-01

Skill acquisition is a critical component of any vocational technical training program. When this component is missing or falls below expectation, it tends to defeat the objectives of the program. In Nigeria, many skill-oriented schools experience great challenges in trying to provide for the necessary facilities required for effective technical…

Managing Technical and Cost Uncertainties During Product Development in a Simulation-Based Design Environment

NASA Technical Reports Server (NTRS)

Karandikar, Harsh M.

1997-01-01

An approach for objective and quantitative technical and cost risk analysis during product development, which is applicable from the earliest stages, is discussed. The approach is supported by a software tool called the Analytical System for Uncertainty and Risk Estimation (ASURE). Details of ASURE, the underlying concepts and its application history, are provided.

Space Electrochemical Research and Technology Conference: Abstracts

NASA Technical Reports Server (NTRS)

1989-01-01

The objectives of the conference were to examine current technologies, research efforts, and advanced ideas, and to identify technical barriers which affect the advancement of electrochemical energy storage systems for space applications. Papers were presented and workshops were conducted in four technical areas: advanced concepts, hydrogen-oxygen fuel cells and electrolyzers, the nickel electrode, and advanced rechargeable batteries.

Gender, Career and Technical Education (CTE) Nontraditional Coursetaking, and Wage Gap

ERIC Educational Resources Information Center

Fluhr, Stephanie A.; Choi, Namok; Herd, Ann; Woo, Hongryun; Alagaraja, Meera

2017-01-01

The two main objectives of this study were to examine the relationship between high school student (9th-12th) gender and nontraditional career and technical education (CTE) course taking, and the combined effects of gender and program area on estimated future wage earnings for male and female CTE completers. A Midwestern state CTE database…

Skiing, Cheese Fondue and Swiss Watches: Analogical Discourse in Vocational Training Interactions

ERIC Educational Resources Information Center

Filliettaz, Laurent; de Saint-Georges, Ingrid; Duc, Barbara

2010-01-01

When trainers or teachers in the field of initial vocational education explain abstract notions, refer to technical objects or emphasize the specificities of technical skills, they often call forth concepts and practices different from those that are directly salient in the training situations in which they engage. The aim of this paper is to…

78 FR 77721 - Office of Small Credit Unions (OSCUI) Grant Program Access for Credit Unions

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-24

... any success or failure to meet objectives for use of proceeds, outcome, or impact. NCUA, in its sole... availability. The OSCUI Grant Program serves as a source of financial support, in the form of technical... provides financial support in the form of technical assistance grants to LICUs. These funds help improve...

A Curriculum to Enhance Decision-Making Skills of Technical Personnel Working in Teams

ERIC Educational Resources Information Center

Raju, P. K.; Sankar, Chetan S.; Xue, Yajiong

2004-01-01

Rapidly changing engineering designs and business scenarios make it essential for engineers and technical personnel to be trained to be effective team players and project managers. This paper reports the experiences gained in developing and implementing a workshop to train engineers at a steel manufacturing plant. The objective of the workshop was…

Instructional Design in Technical Areas. Australian Education Review, No. 43.

ERIC Educational Resources Information Center

Sweller, John

This book details the findings from a research team that used cognitive principles and a large range of experiments to devise a variety of instructional designs. Their recommendations are based on 20 years of objective, published research. Although the program focused on technical subjects, the findings can easily be applied to a range of…

Evaluation of the Radiography Program at Caldwell Community College and Technical Institute--Summer, 1982.

ERIC Educational Resources Information Center

Pipes, V. David

As part of a periodic evaluation of the occupational programs at Caldwell Community College and Technical Institute (CCC&TI), a study of the radiography program was conducted to collect information to facilitate planning, aid in program improvement, and meet accountability demands. The specific objectives of the program evaluation were to…

Spatial Abilities of Medical Graduates and Choice of Residency Programs

ERIC Educational Resources Information Center

Langlois, Jean; Wells, George A.; Lecourtois, Marc; Bergeron, Germain; Yetisir, Elizabeth; Martin, Marcel

2015-01-01

Spatial abilities have been related in previous studies to three-dimensional (3D) anatomy knowledge and the performance in technical skills. The objective of this study was to relate spatial abilities to residency programs with different levels of content of 3D anatomy knowledge and technical skills. The hypothesis was that the choice of residency…

Assembling a Career: Labor Market Outcomes for Manufacturing Program Students in Two-Year Technical Colleges

ERIC Educational Resources Information Center

Matheny, Christopher J.; Chan, Hsun-yu; Wang, Xueli

2015-01-01

Objective: Research on labor market outcomes for individuals who enroll in technical colleges is limited, with even less attention to the effects of short-term certificates than associate degrees. Also, despite the importance of manufacturing programs, there is a lack of research on employment outcomes for individuals who enroll in these programs…

Le Francais des Professions Scientifiques et Techniques (French for the Scientific and Technical Professions).

ERIC Educational Resources Information Center

Muller, Brigitte

Two sequential courses in scientific and technical French developed as a supplement to third- and fourth-year college French, in response to expressed student and industry demand, had as their objectives to develop a general familiarity with products of the large French industrial companies and their United States affiliates and to develop means…

A Computerized Information System Model for Decision Making for the Oklahoma State Department of Vocational and Technical Education.

ERIC Educational Resources Information Center

Smith, Hubert Gene

The objectives of the study presented in the dissertation were to identify present and anticipated information requirements of the various departments within the Oklahoma State Department of Vocational and Technical Education, to design a computerized information system model utilizing an integrated systems concept to meet information…

Factor Structure and Reliability of the 2008 and 2009 SERU/UCUES Questionnaire Core. SERU Project Technical Report

ERIC Educational Resources Information Center

Chatman, Steve

2009-01-01

This technical report summarizes the third independent factor analysis of the SERU/UCUES questionnaire responses of students with majors. The 2009 solution employed the same quantitative analysis used in the prior solutions--varimax orthogonal rotation to determine principal components followed by promax oblique rotation to identify…

One Step beyond What the Literature Says on Institutional Effectiveness of Community, Junior, and Technical Colleges.

ERIC Educational Resources Information Center

Welker, William F.; Morgan, Samuel D.

1991-01-01

Analyzes the content of the literature on community, junior, and technical colleges, utilizing a matrix with seven major classifications (i.e., governance, organization, staffing, clientele, curriculum, finance, and evaluation) and three dimensions (i.e., structure/form, function/role, and process/operations). Offers observations on effectiveness…

Examining the Impact of Non-Technical Security Management Factors on Information Security Management in Health Informatics

ERIC Educational Resources Information Center

Imam, Abbas H.

2013-01-01

Complexity of information security has become a major issue for organizations due to incessant threats to information assets. Healthcare organizations are particularly concerned with security owing to the inherent vulnerability of sensitive information assets in health informatics. While the non-technical security management elements have been at…

Some Characteristics and Writing Problems of Technically Oriented Students.

ERIC Educational Resources Information Center

Ruehr, Ruthann

An understanding of the writing problems and personalities of some of the technically oriented students at Michigan Technological University may help others who teach similar students. Although their scores on aptitude tests are high, these students have had very little experience in writing. In addition, the majority of the students have had very…

Construction Mechanic, Engine Tune-Up II (Diesel), 8-8. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for vocational and technical education, teaches students to restore diesel engine performance to the manufacturer's specifications through troubleshooting and analyzing diesel engine fuel systems and to make minor and major adjustments to those components that directly affect engine…

Cost-Effective Technical and Vocational Education in Developing Countries. Coombe Lodge Report.

ERIC Educational Resources Information Center

Gray, Lynton; Warrender, Ann-Marie

1993-01-01

A study examined ways of reducing the costs of technical and vocational education in developing countries. The major study activities were as follows: an extensive literature search; interviews with individuals experienced in designing and delivering vocational programs for developing countries; field investigations in Thailand and Nigeria; and an…

Perceptions of Former Occupational-Technical Students. Research Report No. 4.

ERIC Educational Resources Information Center

Trufant, John E.; And Others

Former occupational-technical students were questioned as to their attitudes toward their community college programs. The large majority of respondents rated their overall experience very high, and said they would recommend their college to someone seeking the same program. Social activities, however, were rated quite low. Women and graduates were…

The Users and Uses of Scientific and Technical Information: Critical Research Needs.

ERIC Educational Resources Information Center

Freeman, James E.; Rubenstein, Albert H.

At a 1973 workshop held in Denver, Colorado, 21 participants familiar with the uses of Scientific and Technical Information (STI) services gathered to identify the system's major research needs. Initially, 50 research projects were suggested in the areas of design, management, operations, marketing, and global considerations. Using a priority…

Occupational/Technical Programs at Piedmont Virginia Community College. Research Report Number 3-91.

ERIC Educational Resources Information Center

Head, Ronald B.

In 1991, a study was conducted at Piedmont Virginia Community College (PVCC) to identify key trends and provide information regarding occupational/technical programs at PVCC, particularly with respect to student enrollment, student completion, and occupational opportunities for graduates. Major findings of the study included the following: (1)…

Report of the Joint Industry - DoD Task Force on Computer Aided Logistic Support (CALS). Volume 3. Report of Architecture Subgroup.

DTIC Science & Technology

1985-06-01

competitive commercial items such as automobiles and aircraft. 1.3 Implementation Considerations. 1.3.1 Technical Considerations. The major technical...and easily reprogrammable discs; and integrated portable videocomputer devices will become available. 13 139 1 1.2 Projected Performance of the Target

A Review of Technical Communication Programs Outside the United States.

ERIC Educational Resources Information Center

Alred, Gerald J.

2001-01-01

Examines technical communication programs outside the United States and comments on such features as their location in the university structure, links with public relations, the inclusion of internships or practicums, the balance of theory and practice, and typical course offerings. Lists a dozen major programs in seven countries. Concludes that…

Conducting a Social Network Audit

ERIC Educational Resources Information Center

Gumm, Jim; Hatala, John-Paul

2007-01-01

Current research makes it abundantly clear that career and technical educators in North America know how to give students the technical skills they need to be competitive in the 21st century marketplace. However, there may be a gap in many educators' toolboxes. The latest research findings indicate that the majority of people have a difficult time…

Career and Technical Education (CTE) Student Success in Community Colleges: A Conceptual Model

ERIC Educational Resources Information Center

Hirschy, Amy S.; Bremer, Christine D.; Castellano, Marisa

2011-01-01

Career and technical education (CTE) students pursuing occupational associate's degrees or certificates differ from students seeking academic majors at 2-year institutions in several ways. This article examines several theoretical models of student persistence and offers a conceptual model of student success focused on CTE students in community…

Location-Based Augmented Reality for Mobile Learning: Algorithm, System, and Implementation

ERIC Educational Resources Information Center

Tan, Qing; Chang, William; Kinshuk

2015-01-01

AR technology can be considered as mainly consisting of two aspects: identification of real-world object and display of computer-generated digital contents related the identified real-world object. The technical challenge of mobile AR is to identify the real-world object that mobile device's camera aim at. In this paper, we will present a…

Iridium: failures & successes

NASA Astrophysics Data System (ADS)

Christensen, CarissaBryce; Beard, Suzette

2001-03-01

This paper will provide an overview of the Iridium business venture in terms of the challenges faced, the successes achieved, and the causes of the ultimate failure of the venture — bankruptcy and system de-orbit. The paper will address technical, business, and policy issues. The intent of the paper is to provide a balanced and accurate overview of the Iridium experience, to aid future decision-making by policy makers, the business community, and technical experts. Key topics will include the history of the program, the objectives and decision-making of Motorola, the market research and analysis conducted, partnering strategies and their impact, consumer equipment availability, and technical issues — target performance, performance achieved, technical accomplishments, and expected and unexpected technical challenges. The paper will use as sources trade media and business articles on the Iridium program, technical papers and conference presentations, Wall Street analyst's reports, and, where possible, interviews with participants and close observers.

Technical solutions for mitigating security threats caused by health professionals in clinical settings.

PubMed

Fernandez-Aleman, Jose Luis; Belen Sanchez Garcia, Ana; Garcia-Mateos, Gines; Toval, Ambrosio

2015-08-01

The objective of this paper is to present a brief description of technical solutions for health information system security threats caused by inadequate security and privacy practices in healthcare professionals. A literature search was carried out in ScienceDirect, ACM Digital Library and IEEE Digital Library to find papers reporting technical solutions for certain security problems in information systems used in clinical settings. A total of 17 technical solutions were identified: measures for password security, the secure use of e-mail, the Internet, portable storage devices, printers and screens. Although technical safeguards are essential to the security of healthcare organization's information systems, good training, awareness programs and adopting a proper information security policy are particularly important to prevent insiders from causing security incidents.

[NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 4:] Technical communications in aerospace: An analysis of the practices reported by US and European aerospace engineers and scientists

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.; Glassman, Myron

1990-01-01

Two pilot studies were conducted that investigated the technical communications practices of U.S. and European aerospace engineers and scientists. Both studies had the same five objectives: (1) solicit opinions regarding the importance of technical communications; (2) determine the use and production of technical communications; (3) seek views about the appropriate content of an undergraduate course in technical communications; (4) determine use of libraries, information centers, and online database; (5) determine use and importance of computer and information technology to them. A self-administered questionnaire was mailed to randomly selected aerospace engineers and scientists, with a slightly modified version sent to European colleagues. Their responses to selected questions are presented in this paper.

The Preclose Technique in Percutaneous Endovascular Aortic Repair: A Systematic Literature Review and Meta-analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jaffan, Abdel Aziz A., E-mail: aajaffan@gmail.com; Prince, Ethan A., E-mail: eprince@lifespan.org; Hampson, Christopher O., E-mail: christopherohampson@gmail.com

2013-06-15

Purpose. To establish the efficacy and safety of the preclose technique in total percutaneous endovascular aortic repair (PEVAR).MethodsA systematic literature search of Medline database was conducted for series on PEVAR published between January 1999 and January 2012.ResultsThirty-six articles comprising 2,257 patients and 3,606 arterial accesses were included. Anatomical criteria used to exclude patients from undergoing PEVAR were not uniform across all series. The technical success rate was 94 % per arterial access. Failure was unilateral in the majority (93 %) of the 133 failed PEVAR cases. The groin complication rate in PEVAR was 3.6 %; a minority (1.6 %) ofmore » these groin complications required open surgery. The groin complication rate in failed PEVAR cases converted to groin cutdown was 6.1 %. A significantly higher technical success rate was achieved when arterial access was performed via ultrasound guidance. Technical failure rate was significantly higher with larger sheath size ({>=}20F). Conclusion. The preclose technique in PEVAR has a high technical success rate and a low groin complication rate. Technical success tends to increase with ultrasound-guided arterial access and decrease with larger access. When failure occurs, it is unilateral in the majority of cases, and conversion to surgical cutdown does not appear to increase the operative risk.« less

Passive Optical Link Budget for LEO Space Surveillance

NASA Astrophysics Data System (ADS)

Wagner, P.; Hasenohr, T.; Hampf, D.; Sproll, F.; Humbert, L.; Rodmann, J.; Riede, W.

The rising space debris population is becoming an increasing risk for space assets. Even objects with the size of 10mm can cause major damages to active spacecraft. Especially the orbits around 800km high are densely populated with space debris objects. To assess the risk of collisions with active satellites, the Earth orbits need to be surveyed permanently. Space debris laser ranging systems for example can deliver highly accurate positional data for precise orbit determination. Therefor a priori information about the objects coarse trajectory is needed. Such initial orbit information can be provided by wide angle optical sensors. The Institute of Technical Physics at the German Aerospace Center in Stuttgart runs an observatory to perform passive as well as laser optical measurements to LEO objects. In order to detect unknown objects, a wide-angle imaging system with a field of view in the range of 5° to 15° equipped with an astronomical CCD camera and a commercial off the shelf (COTS) lens was designed to continuously observe the night sky for LEO objects. This paper presents the passive optical link budget for observing LEO objects to show the benefits and limits of the physical performance of an optical surveillance system. A compact COTS system is able to detect objects with a couple of decimeters in size while a large aperture telescope can detect objects with diameters below 10cm. Additionally, data captured by a passive optical staring system with a 10 cm aperture was analyzed. It is shown that 90% of all objects with a radar cross section larger than 2m² are detected with such a system during twilight conditions. The smallest detected LEO object with this system has a size of 0.32m x 0.32m x 0.26m. These measurements are compared to the developed link budget which allows an estimation of the performance of larger systems.

Engineering directorate technical facilities catalog

NASA Technical Reports Server (NTRS)

Maloy, Joseph E.

1993-01-01

The Engineering Directorate Technical Facilities Catalog is designed to provide an overview of the technical facilities available within the Engineering Directorate at the National Aeronautics and Space Administration (NASA), Lyndon B. Johnson Space Center (JSC) in Houston, Texas. The combined capabilities of these engineering facilities are essential elements of overall JSC capabilities required to manage and perform major NASA engineering programs. The facilities are grouped in the text by chapter according to the JSC division responsible for operation of the facility. This catalog updates the facility descriptions for the JSC Engineering Directorate Technical Facilities Catalog, JSC 19295 (August 1989), and supersedes the Engineering Directorate, Principle test and Development Facilities, JSC, 19962 (November 1984).

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 21: Technological innovation and technical communications: Their place in aerospace engineering curricula. A survey of European, Japanese, and US Aerospace Engineers and Scientists

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Holland, Maurita Peterson; Keene, Michael L.; Kennedy, John M.

1991-01-01

Aerospace engineers and scientists from Western Europe, Japan, and the United States were surveyed as part of the NASA/DoD Aerospace Knowledge Diffusion Research Project. Questionnaires were used to solicit their opinions regarding the following: (1) the importance of technical communications to their profession; (2) the use and production of technical communications; and (3) their views about the appropriate content of an undergraduate course in technical communications. The ability to communicate technical information effectively was very important to the aerospace engineers and scientists who participated in the study. A considerable portion of their working week is devoted to using and producing technical information. The types of technical communications used and produced varied within and among the three groups. The type of technical communication product used and produced appears to be related to respondents' professional duties. Respondents from the three groups made similar recommendations regarding the principles, mechanics, and on-the-job communications to be included in an undergraduate technical communications course for aerospace majors.

The influence of deficient retro-aortic rim on technical success and early adverse events following device closure of secundum atrial septal defects: An Analysis of the IMPACT Registry®.

PubMed

O'Byrne, Michael L; Gillespie, Matthew J; Kennedy, Kevin F; Dori, Yoav; Rome, Jonathan J; Glatz, Andrew C

2017-01-01

Concern regarding aortic erosion has focused attention on the retro-aortic rim in patients undergoing device closure of atrial septal defects (ASD), but its effect on early outcomes is not well studied. A multicenter retrospective cohort study of patients undergoing device occlusion of ASD between 1/2011-10/2014 was performed, using data from the IMproving Pediatric and Adult Congenital Treatment Registry. Subjects were divided between those with retro-aortic rim <5 and ≥5 mm. Primary outcomes were technical failure and major early adverse events. Case times were measured as surrogates of technical complexity. The effect of deficient retro-aortic rim on primary outcomes was assessed using hierarchical logistic regression, adjusting for other suspected covariates and assessing whether they represent independent risk factors RESULTS: 1,564 subjects (from 77 centers) were included, with deficient retro-aortic rim present in 40%. Technical failure occurred in 91 subjects (5.8%) and a major early adverse event in 64 subjects (4.1%). Adjusting for known covariates, the presence of a deficient retro-aortic rim was not significantly associated with technical failure (OR: 1.3, 95% CI: 0.9-2.1) or major early adverse event (OR: 0.7, 95% CI: 0.4-1. 2). Total case (P = 0.01) and fluoroscopy time (P = 0.02) were greater in subjects with deficient rim, but sheath time was not significantly different (P = 0.07). Additional covariates independently associated with these outcomes were identified. Deficient retro-aortic rim was highly prevalent but not associated with increased risk of technical failure or early adverse events. Studies with longer follow-up are necessary to assess other outcomes, including device erosion. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

[Facing the challenges of ubiquitous computing in the health care sector].

PubMed

Georgieff, Peter; Friedewald, Michael

2010-01-01

The steady progress of microelectronics, communications and information technology will enable the realisation of the vision for "ubiquitous computing" where the Internet extends into the real world embracing everyday objects. The necessary technical basis is already in place. Due to their diminishing size, constantly falling price and declining energy consumption, processors, communications modules and sensors are being increasingly integrated into everyday objects today. This development is opening up huge opportunities for both the economy and individuals. In the present paper we discuss possible applications, but also technical, social and economic barriers to a wide-spread use of ubiquitous computing in the health care sector. .

Feasibility study for mega-electron-volt electron beam tomography.

PubMed

Hampel, U; Bärtling, Y; Hoppe, D; Kuksanov, N; Fadeev, S; Salimov, R

2012-09-01

Electron beam tomography is a promising imaging modality for the study of fast technical processes. But for many technical objects of interest x rays of several hundreds of keV energy are required to achieve sufficient material penetration. In this article we report on a feasibility study for fast electron beam computed tomography with a 1 MeV electron beam. The experimental setup comprises an electrostatic accelerator with beam optics, transmission target, and a single x-ray detector. We employed an inverse fan-beam tomography approach with radiographic projections being generated from the linearly moving x-ray source. Angular projections were obtained by rotating the object.

Maximizing mitigation benefits-making a difference with strategic inter-resource agency planning : year two technical report.

DOT National Transportation Integrated Search

2014-11-01

The objective of this research project is to assess current mitigation policies and practices in comparison to : resource agency objectives and to identify mitigation strategies and priorities that provide greater cost-benefit potential and implement...

Research and Technology Objectives and Plans Summary (RTOPS)

NASA Technical Reports Server (NTRS)

1982-01-01

A compilation of summary portions of each of the Research and Technology Objectives and Plans (RTOPS) used for management review and control of research currently in progress throughout NASA is presented. Subject, technical monitors, responsible NASA organization, and RTOP number indexes are included.

Maximizing mitigation benefits-making a difference with strategic inter-resource agency planning : year one technical report.

DOT National Transportation Integrated Search

2014-04-01

The objective of this research project is to assess current mitigation policies and practices in comparison to : resource agency objectives, and identify mitigation strategies and priorities that provide greater cost-benefit : potential and implement...

Research and Technology Objectives and Plans Summary (RTOPS)

NASA Technical Reports Server (NTRS)

1981-01-01

A compilation of the summary portions of each of the Research and Technology Objective Plans (RTOP) used for management review and control of research currently in progress throughout NASA is presented. Indexes include: subject, technical monitor, responsible NASA organization, and RTOP number.

Mission objectives and trajectories

NASA Technical Reports Server (NTRS)

1973-01-01

The present state of the knowledge of asteroids was assessed to identify mission and target priorities for planning asteroidal flights in the 1980's and beyond. Mission objectives, mission analysis, trajectory studies, and cost analysis are discussed. A bibliography of reports and technical memoranda is included.

Research and Technology Objectives and Plans Summary (RTOPS)

NASA Technical Reports Server (NTRS)

1980-01-01

A compilation of the summary portions of each of the Research and Technology Objectives and Plans (RTOPS) used for management review and control research currently in progress throughout NASA is presented. Indexes include: subject, technical monitor, responsible NASA organization, and RTOP number.

[Home hemodialysis: the technical overview. A 2010 survey].

PubMed

Ponson, Laurent; Arkouche, Walid; Laville, Maurice

2012-04-01

Compared to the daily work in dialysis units, home haemodialysis represents a particular task for the technical services of healthcare facilities. This survey concerns this modality of treatment of end-stage chronic renal failure, and was led to three objectives: to make a snapshot of the practices done by the technical staff, to point out significant differences, and to identify common issues. This is also an opportunity to discuss about the future of this treatment. Numbers of registries show a continuous decline of home haemodialysis during past decades. This could be explained by many factors, but on the other hand several points tend to forecast a renewed interest for this method of treatment. A questionnaire was sent to every technical service of health organizations dispensing dialysis in France. Seventeen health facilities providing home haemodialysis have sent back their information, representing 238 patients, that to say almost the totality of the patients of the country. These data were analysed, relevant indicators were sorted out, so that initial objectives could be completed. The results are explained as follows: site activities, procedures before and during patient installation, equipment, preventive visits, and corrective maintenance. In lack of a precise regulation on the technical support of these patients, significant differences of operations were noted and are detailed, as well as several common difficulties. All these elements can be used as a basis for the development of a practical guide intended to technical services. This work is voluntarily centered on the technical aspects, but other levers exist to revitalize this method. Copyright © 2012 Association Société de néphrologie. Published by Elsevier SAS. All rights reserved.

An operational air quality objective analysis of surface pollutants

NASA Astrophysics Data System (ADS)

Menard, R.; Robichaud, A.

2013-05-01

As of December 2012 a surface analysis of O3, PM2.5 at a resolution of 10 km over Canada and USA has become an operational product of Environment Canada. Analyses based an optimum interpolation scheme adapted to the variability of surface pollutant is run each hour. We will briefly discuss the specifics of the scheme, the technical implementation that lead to an operational implementation, a description and validation of the product as it stands today. An analysis of NO2 and a map of an air quality health index is also under way. We are now developing a high resolution analysis, 2.5 km over major cities over the Montreal-Toronto area and over the Oil sands region. The effect of state-dependent error covariance modeling will be present with some early results of the high resolutions analysis/assimilation.

Workshop on Two-Phase Fluid Behavior in a Space Environment

NASA Technical Reports Server (NTRS)

Swanson, Theodore D. (Editor); Juhasz, AL (Editor); Long, W. Russ (Editor); Ottenstein, Laura (Editor)

1989-01-01

The Workshop was successful in achieving its main objective of identifying a large number of technical issues relating to the design of two-phase systems for space applications. The principal concern expressed was the need for verified analytical tools that will allow an engineer to confidently design a system to a known degree of accuracy. New and improved materials, for such applications as thermal storage and as heat transfer fluids, were also identified as major needs. In addition to these research efforts, a number of specific hardware needs were identified which will require development. These include heat pumps, low weight radiators, advanced heat pipes, stability enhancement devices, high heat flux evaporators, and liquid/vapor separators. Also identified was the need for a centralized source of reliable, up-to-date information on two-phase flow in a space environment.

United States benefits of improved worldwide wheat crop information from a LANDSAT system

NASA Technical Reports Server (NTRS)

Heiss, K. P.; Sand, F.; Seidel, A.; Warner, D.; Sheflin, N.; Bhattacharyya, R.; Andrews, J.

1975-01-01

The value of worldwide information improvements on wheat crops, promised by LANDSAT, is measured in the context of world wheat markets. These benefits are based on current LANDSAT technical goals and assume that information is made available to all (United States and other countries) at the same time. A detailed empirical sample demonstration of the effect of improved information is given; the history of wheat commodity prices for 1971-72 is reconstructed and the price changes from improved vs. historical information are compared. The improved crop forecasting from a LANDSAT system assumed include wheat crop estimates of 90 percent accuracy for each major wheat producing region. Accurate, objective worldwide wheat crop information using space systems may have a very stabilizing influence on world commodity markets, in part making possible the establishment of long-term, stable trade relationships.

Final Technical Report "Study of Efficiency of Raman Backscattering Amplification in Plasma"

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suckewer, Szymon

2014-03-31

General : Our major scientific achievements in Raman Backscattering (RBS) amplification and compression of short laser pulses in plasma. The laser system based on RBS steps in where the current technology of chirped pulse amplification (CPA) (extremely successful in developing ultra-short and ultra-intense laser pulses in last 2 decades) becomes difficult and very expensive to apply. Good base for such RBS laser was created by our recent experiments, which were supported by GPS grants. The main objective of the present grant was: improvement efficiency of energy transfer from pump to seed. The results surpassed our expectations; we improved the efficiencymore » of energy transfer from pump to seed by a factor of 6 compared to the best of our previous results and amplified seed pulse compressed down to about 50 fsec.« less

Technical Evaluation Motor No. 10 (TEM-10)

NASA Technical Reports Server (NTRS)

1993-01-01

Technical Evaluation Motor No. 10 (TEM-10) was static fired on 27 Apr. 1993 at the Thiokol Corporation full-scale motor static test bay, T-24. This final test report documents the procedures, performance, and results of the static test firing of TEM-10. All observations, discussions, conclusions, and recommendations contained are final. Included is a presentation and discussion of TEM-10 performance, anomalies, and test results in concurrence with the objectives outlined in CTP-0110, Revision D, Space Shuttle Technical Evaluation Motor No. 10 (TEM-10) Static Fire Test Plan.

Supersonics Project: Airport Noise Technical Challenge

NASA Technical Reports Server (NTRS)

Bridges, James E.

2008-01-01

This presentation gives an overview of the work being done under the Airport Noise Technical Challenge portion of the Supersonics Project in the Fundamental Aeronautics Program. The objective of the Challenge is to provide technology (e.g. low noise nozzle concepts) and engineering tools required for a viable supersonic aircraft. To accomplish this we have activities divided into Prediction, Diagnostics, and Engineering elements. Each of the tasks reviewed here have potential applications to work being done at other flight regimes and other aircraft and are of interest to the Acoustics Technical Working Group.

Evaluating the effectiveness of case method instruction in technical communication

NASA Technical Reports Server (NTRS)

Feinberg, S. G.

1981-01-01

The effectiveness of the case method as an instructional technique in improving technical writing was evaluated. The development of a self-report instrument that attempts to measure changes in attitude toward technical communication and the presentation results change are the purpose of this paper. Standards for developing a case set forth by Goldstein and Couture, were used to design an evaluation instrument to measure the effect instruction on student attitude toward technical communication. This self-report instrument is based on model developed and tested by Daly and Miller who studied writer attitude and apprehension toward writing. It was the most important objective of any evaluation is to provide information for improving the program.

Percutaneous Cryoablation of Clinical T2 (> 7 cm) Renal Masses: Technical Considerations, Complications, and Short-Term Outcomes.

PubMed

Moynagh, Michael R; Schmit, Grant D; Thompson, Robert H; Boorjian, Stephen A; Woodrum, David A; Curry, Timothy B; Atwell, Thomas D

2015-06-01

To determine the technical success, safety, and preliminary clinical outcome of percutaneous cryoablation of large (> 7 cm) renal masses. Twelve patients underwent percutaneous cryoablation for treatment of renal tumors measuring greater than 7 cm (clinical stage II, T2aN0M0) between 2004 and 2013. Median patient age was 75 years (range, 46-84 y), median Charlson comorbidity index was 5 (range, 4-9), and median maximal tumor diameter was 8.4 cm (range, 7.2-9.7 cm). Seven of the 12 patients underwent superselective intraarterial tumor embolization before cryoablation. Technical success, procedural complications, renal function, and oncologic and survival outcomes were evaluated for each patient. All cryoablation procedures were technically successful in a single treatment session, with no mortalities at 30 days. Two patients (17%) experienced major complications related to postprocedural hemorrhage. Median change in estimated glomerular filtration rate within 7 days following cryoablation treatment was 11 mL/min (range, 7-14 mL/min). One patient with baseline stage IV chronic kidney disease and a major bleeding complication required temporary dialysis in the periprocedural period. In 11 patients (92%) who had follow-up beyond 3 months after the procedure (mean, 19 mo; range, 4-49 mo), recurrence-free survival and overall survival rates at 2 years were 100% and 91%, respectively. Percutaneous cryoablation of large (> 7 cm) renal masses was technically successful, with effective preliminary clinical outcomes. However, major complications are more common with cryoablation of stage T2 tumors than is typically encountered with treatment of smaller stage T1 tumors. Copyright © 2015 SIR. Published by Elsevier Inc. All rights reserved.

[NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 1, part 1:] Technical communications in aeronautics: Results of an exploratory study

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Glassman, Myron; Oliu, Walter E.; Barclay, Rebecca O.

1989-01-01

A study was undertaken that explored several aspects of technical communications in aeronautics. The study, which utilized survey research in the form of a self-administered questionnaire, was sent to 2,000 randomly selected members of the American Institute of Aeronautics and Astronautics. Six hundred and six usable questionnaires (30.3 percent) were received by the established cut off date. The study had five objectives. The first was to solicit the opinions of aeronautical engineers and scientists regarding the importance of technical communications to their profession; second, to determine their use and production of technical communications; third, to seek their views on the content of an undergraduate course in technical communications; fourth, to determine their use of libraries/technical information centers; and finally, to determine the use and importance of computer and information technology to them. The findings add considerable information to the knowledge of technical communications practices among aeronautical engineers and scientists and reinforce some of the conventional wisdom about technical communications and question other widely-held notions.

The Relationship Between Technical And Nontechnical Skills Within A Simulation-Based Ureteroscopy Training Environment.

PubMed

Brunckhorst, Oliver; Shahid, Shahab; Aydin, Abdullatif; Khan, Shahid; McIlhenny, Craig; Brewin, James; Sahai, Arun; Bello, Fernando; Kneebone, Roger; Shamim Khan, Muhammad; Dasgupta, Prokar; Ahmed, Kamran

2015-01-01

Little integration of technical and nontechnical skills (e.g., situational awareness, communication, decision making, teamwork, and leadership) teaching exists within surgery. We therefore aimed to (1) evaluate the relationship between these 2 skill sets within a simulation-based environment and (2) assess if certain nontechnical skill components are of particular relevance to technical performance. A prospective analysis of data acquired from a comparative study of simulation vs nonsimulation training was conducted. Half of the participants underwent training of technical and nontechnical skills within ureteroscopy, with the remaining half undergoing no training. All were assessed within a full immersion environment against both technical (time to completion, Objective Structured Assessment of Technical Skills, and task-specific checklist scores) and nontechnical parameters (Nontechnical Skills for Surgeons [NOTSS] rating scale). The data of whole and individual cohorts were analyzed using Pearson correlation coefficient. The trial took place within the Simulation and Interactive Learning Centre at Guy's Hospital, London, UK. In total, 32 novice participants with no prior practical ureteroscopy experience were included within the data analysis. A correlation was found within all outcome measures analyzed. For the whole cohort, a strong negative correlation was found between time to completion and NOTSS scores (r = -0.75, p < 0.001), with strong positive correlations identified when NOTSS scores were compared with Objective Structured Assessment of Technical Skills (r = 0.89, p < 0.001) and task-specific checklist scores (r = 0.91, p < 0.001). Similar results were observed when each cohort was analyzed separately. Finally, all individual nontechnical skill components demonstrated a strong correlation with all technical skill parameters, regardless of training. A strong correlation between technical and nontechnical performance exists, which was demonstrated to be irrespective of training received. This may suggest an inherent link between skill sets. Furthermore, all nontechnical skill sets are important in technical performance. This supports the notion that both of these skills should be trained and assessed together within 1 curriculum. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Composites for Exploration Upper Stage

NASA Technical Reports Server (NTRS)

Fikes, J. C.; Jackson, J. R.; Richardson, S. W.; Thomas, A. D.; Mann, T. O.; Miller, S. G.

2016-01-01

The Composites for Exploration Upper Stage (CEUS) was a 3-year, level III project within the Technology Demonstration Missions program of the NASA Space Technology Mission Directorate. Studies have shown that composites provide important programmatic enhancements, including reduced weight to increase capability and accelerated expansion of exploration and science mission objectives. The CEUS project was focused on technologies that best advanced innovation, infusion, and broad applications for the inclusion of composites on future large human-rated launch vehicles and spacecraft. The benefits included near- and far-term opportunities for infusion (NASA, industry/commercial, Department of Defense), demonstrated critical technologies and technically implementable evolvable innovations, and sustained Agency experience. The initial scope of the project was to advance technologies for large composite structures applicable to the Space Launch System (SLS) Exploration Upper Stage (EUS) by focusing on the affordability and technical performance of the EUS forward and aft skirts. The project was tasked to develop and demonstrate critical composite technologies with a focus on full-scale materials, design, manufacturing, and test using NASA in-house capabilities. This would have demonstrated a major advancement in confidence and matured the large-scale composite technology to a Technology Readiness Level 6. This project would, therefore, have bridged the gap for providing composite application to SLS upgrades, enabling future exploration missions.

Motivations for Participation in an Online Social Media Community for Diabetes.

PubMed

White, Katherine; Gebremariam, Achamyeleh; Lewis, Dana; Nordgren, Weston; Wedding, James; Pasek, Josh; Garrity, Ashley; Hirschfeld, Emily; Lee, Joyce M

2018-05-01

Our objectives were to describe individuals' motivations for participation in an online social media community and to assess their level of trust in medical information provided by medical professionals and community members. A purposive survey was delivered to participants recruited through posts on the CGM in the Cloud group, Twitter, and blogs. Individuals were asked a series of demographic and social media use questions. A total of 1268 members of the CGM in the Cloud community responded to the survey. The majority were non-Hispanic White (92.1%) and caregivers of an individual with diabetes (80.9%). Mean age was 41 years old, and 74.8% were female. Primary goals of the Facebook group were to learn more about Nightscout technology and to receive technological assistance. Individuals provided assistance to the community through spreading awareness, technical assistance, support, and donation. Respondents put a high level of trust in their peers versus health professionals in many health situations with nearly 40% of individuals reported to be helped by following advice found in the Facebook group, and 99% reported no harm. Our findings suggest that patients with diabetes and their caregivers use social media for many health-related purposes including medical recommendations and technical support for medical devices and systems as well as emotional support.

Efficiency of U.S. Dialysis Centers: An Updated Examination of Facility Characteristics That Influence Production of Dialysis Treatments

PubMed Central

Shreay, Sanatan; Ma, Martin; McCluskey, Jill; Mittelhammer, Ron C; Gitlin, Matthew; Stephens, J Mark

2014-01-01

Objective To explore the relative efficiency of dialysis facilities in the United States and identify factors that are associated with efficiency in the production of dialysis treatments. Data Sources/Study Setting Medicare cost report data from 4,343 free-standing dialysis facilities in the United States that offered in-center hemodialysis in 2010. Study Design A cross-sectional, facility-level retrospective database analysis, utilizing data envelopment analysis (DEA) to estimate facility efficiency. Data Collection/Extraction Methods Treatment data and cost and labor inputs of dialysis treatments were obtained from 2010 Medicare Renal Cost Reports. Demographic data were obtained from the 2010 U.S. Census. Principal Findings Only 26.6 percent of facilities were technically efficient. Neither the intensity of market competition nor the profit status of the facility had a significant effect on efficiency. Facilities that were members of large chains were less likely to be efficient. Cost and labor savings due to changes in drug protocols had little effect on overall dialysis center efficiency. Conclusions The majority of free-standing dialysis facilities in the United States were functioning in a technically inefficient manner. As payment systems increasingly employ capitation and bundling provisions, these institutions will need to evaluate their efficiency to remain competitive. PMID:24237043

International Approaches for Nuclear Waste Disposal in Geological Formations: Geological Challenges in Radioactive Waste Isolation—Fifth Worldwide Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Faybishenko, Boris; Birkholzer, Jens; Sassani, David

The overall objective of the Fifth Worldwide Review (WWR-5) is to document the current state-of-the-art of major developments in a number of nations throughout the World pursuing geological disposal programs, and to summarize challenging problems and experience that have been obtained in siting, preparing and reviewing cases for the operational and long-term safety of proposed and operating nuclear waste repositories. The scope of the Review is to address current specific technical issues and challenges in safety case development along with the interplay of technical feasibility, siting, engineering design issues, and operational and post-closure safety. In particular, the chapters included inmore » the report present the following types of information: the current status of the deep geological repository programs for high level nuclear waste and low- and intermediate level nuclear waste in each country, concepts of siting and radioactive waste and spent nuclear fuel management in different countries (with the emphasis of nuclear waste disposal under different climatic conditions and different geological formations), progress in repository site selection and site characterization, technology development, buffer/backfill materials studies and testing, support activities, programs, and projects, international cooperation, and future plans, as well as regulatory issues and transboundary problems.« less

Optimal planning for the sustainable utilization of municipal solid waste.

PubMed

Santibañez-Aguilar, José Ezequiel; Ponce-Ortega, José María; Betzabe González-Campos, J; Serna-González, Medardo; El-Halwagi, Mahmoud M

2013-12-01

The increasing generation of municipal solid waste (MSW) is a major problem particularly for large urban areas with insufficient landfill capacities and inefficient waste management systems. Several options associated to the supply chain for implementing a MSW management system are available, however to determine the optimal solution several technical, economic, environmental and social aspects must be considered. Therefore, this paper proposes a mathematical programming model for the optimal planning of the supply chain associated to the MSW management system to maximize the economic benefit while accounting for technical and environmental issues. The optimization model simultaneously selects the processing technologies and their location, the distribution of wastes from cities as well as the distribution of products to markets. The problem was formulated as a multi-objective mixed-integer linear programing problem to maximize the profit of the supply chain and the amount of recycled wastes, where the results are showed through Pareto curves that tradeoff economic and environmental aspects. The proposed approach is applied to a case study for the west-central part of Mexico to consider the integration of MSW from several cities to yield useful products. The results show that an integrated utilization of MSW can provide economic, environmental and social benefits. Copyright © 2013 Elsevier Ltd. All rights reserved.

LCA and design for environment (DFE) -- Application to the automotive industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bensahel, J.F.; Teulon, H.

End of life of large plastic parts is a major issue for the automotive industry, whereas metal parts are easily recycled. Ecobilan is carrying out a study on plastic bumpers, for the French car manufacturer Peugeot SA. This study aims at estimating the environmental impacts of three alternative treatments for plastic bumpers at the end of life of the car: (1 ) crushing and shredding with the whole automobile, screening of the metallic and mineral part, and incineration of the automobile shredder residue, (2) dismantling and separate incineration of bumpers, (3) dismantling and recycling of bumpers, as new plastic partsmore » for the automobile industry. Systems boundaries are defined so as to include into the systems only the steps which makes difference between the three options. The long term stake of the study is to include environmental data in the design of the car, along with technical and economic elements, that is to say to Design For Environment. The objective is to find economic, technical and environmental optimum for complex products, that makes sense on the whole life cycle of the product. Peugeot SA agrees to publish some results, which will be available by May 1995. These results will mix both environmental and economic analysis.« less

Funding for the 2ND IAEA technical meeting on fusion data processing, validation and analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greenwald, Martin

The International Atomic Energy Agency (IAEA) will organize the second Technical Meeting on Fusion Da Processing, Validation and Analysis from 30 May to 02 June, 2017, in Cambridge, MA USA. The meeting w be hosted by the MIT Plasma Science and Fusion Center (PSFC). The objective of the meeting is to provide a platform where a set of topics relevant to fusion data processing, validation and analysis are discussed with the view of extrapolation needs to next step fusion devices such as ITER. The validation and analysis of experimental data obtained from diagnostics used to characterize fusion plasmas are crucialmore » for a knowledge based understanding of the physical processes governing the dynamics of these plasmas. The meeting will aim at fostering, in particular, discussions of research and development results that set out or underline trends observed in the current major fusion confinement devices. General information on the IAEA, including its mission and organization, can be found at the IAEA websit Uncertainty quantification (UQ) Model selection, validation, and verification (V&V) Probability theory and statistical analysis Inverse problems & equilibrium reconstru ction Integrated data analysis Real time data analysis Machine learning Signal/image proc essing & pattern recognition Experimental design and synthetic diagnostics Data management« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ghosh, A.; Hsiung, S.M.; Chowdhury, A.H.

Long-term stability of emplacement drifts and potential near-field fluid flow resulting from coupled effects are among the concerns for safe disposal of high-level nuclear waste (HLW). A number of factors can induce drift instability or change the near-field flow patterns. Repetitive seismic loads from earthquakes and thermal loads generated by the decay of emplaced waste are two significant factors. One of two key technical uncertainties (KTU) that can potentially pose a high risk of noncompliance with the performance objectives of 10 CFR Part 60 is the prediction of thermal-mechanical (including repetitive seismic load) effects on stability of emplacement drifts andmore » the engineered barrier system. The second KTU of concern is the prediction of thermal-mechanical-hydrological (including repetitive seismic load) effects on the host rock surrounding the engineered barrier system. The Rock Mechanics research project being conducted at the Center for Nuclear Waste Regulatory Analyses (CNWRA) is intended to address certain specific technical issues associated with these two KTUs. This research project has two major components: (i) seismic response of rock joints and a jointed rock mass and (ii) coupled thermal-mechanical-hydrological (TMH) response of a jointed rock mass surrounding the engineered barrier system (EBS). This final report summarizes the research activities concerned with the repetitive seismic load aspect of both these KTUs.« less

Evaluating the effectiveness of the Minamata Convention on Mercury: Principles and recommendations for next steps.

PubMed

Evers, David C; Keane, Susan Egan; Basu, Niladri; Buck, David

2016-11-01

The Minamata Convention on Mercury is a multilateral environmental agreement that obligates Parties to reduce or control sources of mercury pollution in order to protect human health and the environment. The Convention includes provisions on providing technical assistance and capacity building, particularly for developing countries and countries with economies in transition, to promote its effective implementation. Evaluating the effectiveness of the Convention (as required by Article 22) is a crucial component to ensure that it meets this objective. We describe an approach to measure effectiveness, which includes a suite of short-, medium-, and long-term metrics related to five major mercury control Articles in the Convention, as well as metrics derived from monitoring of mercury in the environment using select bioindicators, including people. The use of existing biotic Hg data will define spatial gradients (e.g., biological mercury hotspots), baselines to develop relevant temporal trends, and an ability to assess risk to taxa and human communities of greatest concern. We also recommend the development of a technical document that describes monitoring options for the Conference of Parties, to provide science-based standardized guidelines for collecting relevant monitoring information, as guided by Article 19. Copyright © 2016 Elsevier B.V. All rights reserved.

Where Is Current Research on Blockchain Technology?—A Systematic Review

PubMed Central

Yli-Huumo, Jesse; Ko, Deokyoon; Park, Sooyong; Smolander, Kari

2016-01-01

Blockchain is a decentralized transaction and data management technology developed first for Bitcoin cryptocurrency. The interest in Blockchain technology has been increasing since the idea was coined in 2008. The reason for the interest in Blockchain is its central attributes that provide security, anonymity and data integrity without any third party organization in control of the transactions, and therefore it creates interesting research areas, especially from the perspective of technical challenges and limitations. In this research, we have conducted a systematic mapping study with the goal of collecting all relevant research on Blockchain technology. Our objective is to understand the current research topics, challenges and future directions regarding Blockchain technology from the technical perspective. We have extracted 41 primary papers from scientific databases. The results show that focus in over 80% of the papers is on Bitcoin system and less than 20% deals with other Blockchain applications including e.g. smart contracts and licensing. The majority of research is focusing on revealing and improving limitations of Blockchain from privacy and security perspectives, but many of the proposed solutions lack concrete evaluation on their effectiveness. Many other Blockchain scalability related challenges including throughput and latency have been left unstudied. On the basis of this study, recommendations on future research directions are provided for researchers. PMID:27695049

Where Is Current Research on Blockchain Technology?-A Systematic Review.

PubMed

Yli-Huumo, Jesse; Ko, Deokyoon; Choi, Sujin; Park, Sooyong; Smolander, Kari

2016-01-01

Blockchain is a decentralized transaction and data management technology developed first for Bitcoin cryptocurrency. The interest in Blockchain technology has been increasing since the idea was coined in 2008. The reason for the interest in Blockchain is its central attributes that provide security, anonymity and data integrity without any third party organization in control of the transactions, and therefore it creates interesting research areas, especially from the perspective of technical challenges and limitations. In this research, we have conducted a systematic mapping study with the goal of collecting all relevant research on Blockchain technology. Our objective is to understand the current research topics, challenges and future directions regarding Blockchain technology from the technical perspective. We have extracted 41 primary papers from scientific databases. The results show that focus in over 80% of the papers is on Bitcoin system and less than 20% deals with other Blockchain applications including e.g. smart contracts and licensing. The majority of research is focusing on revealing and improving limitations of Blockchain from privacy and security perspectives, but many of the proposed solutions lack concrete evaluation on their effectiveness. Many other Blockchain scalability related challenges including throughput and latency have been left unstudied. On the basis of this study, recommendations on future research directions are provided for researchers.

Development of a cultural heritage object BIM model

NASA Astrophysics Data System (ADS)

Braila, Natalya; Vakhrusheva, Svetlana; Martynenko, Elena; Kisel, Tatyana

2017-10-01

The BIM technology during her creation has been aimed, first of all, at design and construction branch, but its application in the field of studying and operation of architectural heritage can essentially change and transfer this kind of activity to new qualitative level. The question of effective introduction of BIM technologies at the solution of administrative questions of operation and development of monuments of architecture is considered in article. Creation of the information model of the building object of cultural heritage including a full complex of information on an object is offered: historical and archival, legal, technical, administrative, etc. The 3D model of an object of cultural heritage with color marking of elements on degree of wear and a first priority of carrying out repair will become one of components of model. This model will allow to estimate visually technical condition of the building in general and to gain general idea about scales of necessary repair and construction actions that promotes improvement of quality of operation of an object, and also simplifies and accelerates processing of information and in need of a memorial building assessment as subject to investment.