Progressive Damage and Failure Analysis of Composite Laminates

NASA Astrophysics Data System (ADS)

Joseph, Ashith P. K.

Composite materials are widely used in various industries for making structural parts due to higher strength to weight ratio, better fatigue life, corrosion resistance and material property tailorability. To fully exploit the capability of composites, it is required to know the load carrying capacity of the parts made of them. Unlike metals, composites are orthotropic in nature and fails in a complex manner under various loading conditions which makes it a hard problem to analyze. Lack of reliable and efficient failure analysis tools for composites have led industries to rely more on coupon and component level testing to estimate the design space. Due to the complex failure mechanisms, composite materials require a very large number of coupon level tests to fully characterize the behavior. This makes the entire testing process very time consuming and costly. The alternative is to use virtual testing tools which can predict the complex failure mechanisms accurately. This reduces the cost only to it's associated computational expenses making significant savings. Some of the most desired features in a virtual testing tool are - (1) Accurate representation of failure mechanism: Failure progression predicted by the virtual tool must be same as those observed in experiments. A tool has to be assessed based on the mechanisms it can capture. (2) Computational efficiency: The greatest advantages of a virtual tools are the savings in time and money and hence computational efficiency is one of the most needed features. (3) Applicability to a wide range of problems: Structural parts are subjected to a variety of loading conditions including static, dynamic and fatigue conditions. A good virtual testing tool should be able to make good predictions for all these different loading conditions. The aim of this PhD thesis is to develop a computational tool which can model the progressive failure of composite laminates under different quasi-static loading conditions. The analysis tool is validated by comparing the simulations against experiments for a selected number of quasi-static loading cases.

Multicomponent analysis of a digital Trail Making Test.

PubMed

Fellows, Robert P; Dahmen, Jessamyn; Cook, Diane; Schmitter-Edgecombe, Maureen

2017-01-01

The purpose of the current study was to use a newly developed digital tablet-based variant of the TMT to isolate component cognitive processes underlying TMT performance. Similar to the paper-based trail making test, this digital variant consists of two conditions, Part A and Part B. However, this digital version automatically collects additional data to create component subtest scores to isolate cognitive abilities. Specifically, in addition to the total time to completion and number of errors, the digital Trail Making Test (dTMT) records several unique components including the number of pauses, pause duration, lifts, lift duration, time inside each circle, and time between circles. Participants were community-dwelling older adults who completed a neuropsychological evaluation including measures of processing speed, inhibitory control, visual working memory/sequencing, and set-switching. The abilities underlying TMT performance were assessed through regression analyses of component scores from the dTMT with traditional neuropsychological measures. Results revealed significant correlations between paper and digital variants of Part A (r s  = .541, p < .001) and paper and digital versions of Part B (r s  = .799, p < .001). Regression analyses with traditional neuropsychological measures revealed that Part A components were best predicted by speeded processing, while inhibitory control and visual/spatial sequencing were predictors of specific components of Part B. Exploratory analyses revealed that specific dTMT-B components were associated with a performance-based medication management task. Taken together, these results elucidate specific cognitive abilities underlying TMT performance, as well as the utility of isolating digital components.

The High-Stakes Test Mess

ERIC Educational Resources Information Center

Goldberg, Mark F.

2004-01-01

Tests are a natural part of education, from the quizzes, essays, and classroom tests that teachers have traditionally administered to the high-stakes tests that states use to make decisions about graduation, promotion, and school funding and governance. In this article, the author stresses the need to learn the unintended consequences of…

CrossTalk, The Journal of Defense Software Engineering. Volume 27, Number 4. July/August 2014

DTIC Science & Technology

2014-07-01

hires him for the work.” To do this with a development project, isolate parts of the sys- tem the development of which is not obvious and develop...class. Coupling makes it more difficult to isolate units of code for testing. The interdependence also makes code comprehension more difficult and...coupled, it is more difficult or impossible to isolate the module under test to ensure the test is focusing only on the desired code and producing

14 CFR 21.35 - Flight tests.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Flight tests. 21.35 Section 21.35... PROCEDURES FOR PRODUCTS AND PARTS Type Certificates § 21.35 Flight tests. (a) Each applicant for an aircraft type certificate (other than under §§ 21.24 through 21.29) must make the tests listed in paragraph (b...

14 CFR 21.35 - Flight tests.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Flight tests. 21.35 Section 21.35... PROCEDURES FOR PRODUCTS AND PARTS Type Certificates § 21.35 Flight tests. (a) Each applicant for an aircraft type certificate (other than under §§ 21.24 through 21.29) must make the tests listed in paragraph (b...

14 CFR 21.35 - Flight tests.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Flight tests. 21.35 Section 21.35... PROCEDURES FOR PRODUCTS AND PARTS Type Certificates § 21.35 Flight tests. (a) Each applicant for an aircraft type certificate (other than under §§ 21.24 through 21.29) must make the tests listed in paragraph (b...

Hypothesis driven drug design: improving quality and effectiveness of the design-make-test-analyse cycle.

PubMed

Plowright, Alleyn T; Johnstone, Craig; Kihlberg, Jan; Pettersson, Jonas; Robb, Graeme; Thompson, Richard A

2012-01-01

In drug discovery, the central process of constructing and testing hypotheses, carefully conducting experiments and analysing the associated data for new findings and information is known as the design-make-test-analyse cycle. Each step relies heavily on the inputs and outputs of the other three components. In this article we report our efforts to improve and integrate all parts to enable smooth and rapid flow of high quality ideas. Key improvements include enhancing multi-disciplinary input into 'Design', increasing the use of knowledge and reducing cycle times in 'Make', providing parallel sets of relevant data within ten working days in 'Test' and maximising the learning in 'Analyse'. Copyright © 2011 Elsevier Ltd. All rights reserved.

PowerPack Developments

NASA Technical Reports Server (NTRS)

2007-01-01

A vintage 1960 J-2 thrust chamber is fitted with brackets and pumps recently at the Pratt & Whitney Rocketdyne assembly facility in Stennis Space Center's Building 9101. Together, the parts comprise the J-2X Powerpack 1A test article. Mississippi Space Services machined the new bracket (the V-shaped arm on the right), making this the first time parts for an engine test article were machined, welded and assembled on site at SSC.

PowerPack Developments

NASA Image and Video Library

2007-04-11

A vintage 1960 J-2 thrust chamber is fitted with brackets and pumps recently at the Pratt & Whitney Rocketdyne assembly facility in Stennis Space Center's Building 9101. Together, the parts comprise the J-2X Powerpack 1A test article. Mississippi Space Services machined the new bracket (the V-shaped arm on the right), making this the first time parts for an engine test article were machined, welded and assembled on site at SSC.

Complex Parts, Complex Data: Why You Need to Understand What Radiation Single Event Testing Data Does and Doesn't Show and the Implications Thereof

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Berg, Melanie D.

2015-01-01

Electronic parts (integrated circuits) have grown in complexity such that determining all failure modes and risks from single particle event testing is impossible. In this presentation, the authors will present why this is so and provide some realism on what this means. Its all about understanding actual risks and not making assumptions.

Alternative Test Methods for Electronic Parts

NASA Technical Reports Server (NTRS)

Plante, Jeannette

2004-01-01

It is common practice within NASA to test electronic parts at the manufacturing lot level to demonstrate, statistically, that parts from the lot tested will not fail in service using generic application conditions. The test methods and the generic application conditions used have been developed over the years through cooperation between NASA, DoD, and industry in order to establish a common set of standard practices. These common practices, found in MIL-STD-883, MIL-STD-750, military part specifications, EEE-INST-002, and other guidelines are preferred because they are considered to be effective and repeatable and their results are usually straightforward to interpret. These practices can sometimes be unavailable to some NASA projects due to special application conditions that must be addressed, such as schedule constraints, cost constraints, logistical constraints, or advances in the technology that make the historical standards an inappropriate choice for establishing part performance and reliability. Alternate methods have begun to emerge and to be used by NASA programs to test parts individually or as part of a system, especially when standard lot tests cannot be applied. Four alternate screening methods will be discussed in this paper: Highly accelerated life test (HALT), forward voltage drop tests for evaluating wire-bond integrity, burn-in options during or after highly accelerated stress test (HAST), and board-level qualification.

The CERAD Neuropsychological Battery in Patients with Frontotemporal Lobar Degeneration

PubMed Central

Haanpää, Ramona M.; Suhonen, Noora-Maria; Hartikainen, Päivi; Koivisto, Anne M.; Moilanen, Virpi; Herukka, Sanna-Kaisa; Hänninen, Tuomo; Remes, Anne M.

2015-01-01

Background/Aims The diagnosis of frontotemporal lobar degeneration (FTLD) is based on neuropsychological examination in addition to clinical symptoms and brain imaging. There is no simple, validated, cognitive tool available in screening for FTLD. The Consortium to Establish a Registry for Alzheimer's Disease neuropsychological battery (CERAD-NB) was originally devised to identify the early cognitive changes related to Alzheimer's disease (AD). Our aim was to investigate the utility of the CERAD-NB in FTLD. Methods Patients with FTLD (n = 95) and AD (n = 90) were assessed with the CERAD-NB, Trail Making Test parts A and B and single-letter Phonemic Fluency. Results FTLD patients were more severely impaired in the Verbal Fluency subtest in the CERAD-NB and Trail Making Test part A compared to AD patients. In addition, AD patients were more impaired in memory subtests compared to FTLD patients. Conclusion The CERAD-NB may be a useful tool in screening for FTLD. Impaired performance in Verbal Fluency with moderately well-preserved Delayed Recall and Memory Tests may help in identifying patients with probable FTLD and discriminating FTLD from AD. Adding the Trail Making Test to the battery might enhance its value as a screening instrument for FTLD. PMID:25999981

Evaluation of Composite Components on the Bell 206L and Sikorsky S-76 Helicopters

NASA Technical Reports Server (NTRS)

Baker, Donald J.

1990-01-01

Progress on two programs to evaluate structural composite parts in flight service on Bell 206L and Sikorsky S-76 commercial helicopters is described. Forty ship sets of composite parts that include the litter door, baggage door, forward fairing, and vertical fin were installed on Bell Model 206L helicopters that are operating in widely different climates. Part installation started in 1981 and selected parts are being removed and tested at prescribed intervals over a 10 yr evaluation. Four horizontal stabilizers and eleven tail rotor spars that are production parts on the S-76 helicopter are being tested after prescribed periods of service to determine the effects of the operating environment on their performance. Concurrent with the flight evaluation, materials used to fabricate the parts are being exposed in ground racks and tested at specified intervals to determine the effects of outdoor environments. Results achieved from 123,000 hrs of accumulated service on the Bell 206L parts and 53,000 hrs on the Sikorsky S-76 parts are reported. Seventy-eight Bell 206L parts were removed and tested statically. Results of 7 yrs of ground exposure of materials used to make the Bell 206L parts are presented.

Analysis of Porosity Defects in Aluminum as Part Handle Motor Vehicle Lever Processed by High-pressure Die Casting

NASA Astrophysics Data System (ADS)

Anggraini, L.; Sugeng

2018-05-01

This research discusses the testing and analysis of cracking Aluminum (Al) material. Al as a handle lever was used for a braking device on a motor vehicle. Cracking of handle lever due to the part content of porosity from hydrogen gas. The existence of the H2 can be caused by the casting process and dies design that is less perfect, especially at the gate or brisket and overflow. This research is to optimize the process of making Al part handle lever, and the construction dies by following the standard. The results of these improvements were reevaluated through the chemical and mechanical testing properties stages, such as density test and tensile test on the workpiece as part handle lever. The loads on the tensile test are 25 kg and 35 kg, and the tensile test result has met the standard set by the motor vehicle company. The optimization result has the porosity defect can be reduced by 99 %. Therefore the best part handle lever can be produced.

Reducing the Need for Guesswork in Multiple-Choice Tests

ERIC Educational Resources Information Center

Bush, Martin

2015-01-01

The humble multiple-choice test is very widely used within education at all levels, but its susceptibility to guesswork makes it a suboptimal assessment tool. The reliability of a multiple-choice test is partly governed by the number of items it contains; however, longer tests are more time consuming to take, and for some subject areas, it can be…

29 CFR Appendix A to Subpart Q of... - References to subpart Q of Part 1926

Code of Federal Regulations, 2010 CFR

2010-07-01

... (ASTM C39-86). • Standard Test Method for Making and Curing Concrete Test Specimens in the Field (ASTM C31-85). • Standard Test Method for Penetration Resistance of Hardened Concrete (ASTM C803-82... (ASTM C873-85). • Standard Method for Developing Early Age Compressive Test Values and Projecting Later...

Do Choice Experiments Generate Reliable Willingness to Pay Estimates Theory and Experimental Evidence

DTIC Science & Technology

2015-01-01

make a series of choices over sets of goods which vary in terms of the levels of their attributes and their costs. The results of these surveys...results motivated the development of the theoretical model reported in Part II, followed by a second experiment (reported in Part III) to test the...deviations from truthful preference revelation in each choice mechanism. The results demonstrate that of the four choice mechanisms tested , only the repeated

Lightweight long life heat exchanger

NASA Technical Reports Server (NTRS)

Moore, E. K.

1975-01-01

The design, fabrication, and evaluation of a full scale shuttle-type condensing heat exchanger constructed of aluminum and utilizing aluminum clad titanium parting sheets is described. A long term salt spray test of candidate parting sheet specimens is described. The results of an investigation into an alternate method of making composite sheet material are discussed.

40 CFR 80.585 - What is the process for approval of a test method for determining the sulfur content of diesel or...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Society for Testing and Materials (ASTM) or International Standards Organization (ISO), shall be approved... description of the technology and/or instrumentation that makes the method functional. (2) Information... part 51. Anyone may purchase copies of this standard from the American Society for Testing and...

40 CFR 80.585 - What is the process for approval of a test method for determining the sulfur content of diesel or...

Code of Federal Regulations, 2011 CFR

2011-07-01

... Society for Testing and Materials (ASTM) or International Standards Organization (ISO), shall be approved... description of the technology and/or instrumentation that makes the method functional. (2) Information... part 51. Anyone may purchase copies of this standard from the American Society for Testing and...

Development of a Medicare Beneficiary Comprehension Test: Assessing Medicare Part D Beneficiaries' Comprehension of Their Benefits

PubMed Central

Aruru, Meghana V.; Salmon, J. Warren

2013-01-01

Background Medicare Part D, the senior prescription drug benefit plan, was introduced through the Medicare Modernization Act of 2003. Medicare beneficiaries receive information about plan options through multiple sources, and it is often assumed by consumer health plans and healthcare providers that beneficiaries can understand and compare plan information. Medicare beneficiaries are older, may have cognitive problems, and may not have a true understanding of managed care. They are more likely than younger persons to have inadequate health literacy, thereby demonstrating significant gaps in knowledge and information about healthcare. Objective To develop a Medicare Beneficiary Comprehension Test (MBCT) to evaluate Medicare beneficiaries' understanding of Part D plan concepts, as presented in the 2008 Medicare & You handbook. Methods A 10-question MBCT was developed using a case-vignette approach that required beneficiaries to read portions of the Medicare & You handbook and answer Part D–related questions associated with healthcare decision-making. The test was divided into 2 sections: (I) insurance concepts and (II) utilization management/appeals and grievances to cover standard terminology, as well as newer utilization management and appeals and grievances procedures that are unique to Part D. The test was administered to 100 beneficiaries at 2 sites—a university geriatrics clinic and a private retirement facility. Beneficiaries were tested for cognition and health literacy before being administered the test. Results The mean score on the MBCT was 3.5 of a maximum of 5, with no statistical difference found between both sites. Ten faculty members and 4 graduate students assessed the content validity of the instrument using a 4-point Likert rating rubric. The construct validity of the instrument was assessed using a principal components analysis with varimax rotation. The principal components analysis yielded 4 factors that were labeled as “Plan D concepts,” “managed care/utilization management,” “cost-sharing,” and “plan comparisons.” The factor analysis indicated that the test is multidimensional and did measure the construct. Conclusions Medicare beneficiaries' understanding of Part D may play a key role in the management of their drug use and health and the associated outcomes. The MBCT and its pending revisions can be administered to beneficiaries with differing health outcomes. Medicare beneficiaries are often faced with several pieces of information involving a complex array of choices amidst bewildering plan options. It is crucial that beneficiaries and/or their family members involved in the decision-making process understand the plan benefits to truly make an informed decision. As the number of Medicare beneficiaries increases over the coming years with the baby boomers, it becomes even more imperative that the elderly have improved access to treatments that can achieve desirable outcomes. Measuring comprehension by Medicare beneficiaries may be an initial step toward understanding more complex issues, such as treatment adherence, decision-making, and, ultimately, trends in healthcare utilization and outcomes. PMID:24991375

The PM-200 lubrication system

NASA Technical Reports Server (NTRS)

Sliney, Harold E.

1991-01-01

Plasma sprayed composite coating of metal-bonded chromium carbide with additions of silver and thermochemically stable fluorides were previously reported to be lubricative in pin on desk bench tests from room temperature to 900 C. An early coating formulation of this type, designated as PS-200, was successfully tested as a cylinder coating in a Stirling engine at a TRRT of 760 C in a hydrogen atmosphere, and as a backup lubricant for gas bearings to 650 C. A subsequent optimization program has shown that tribological properties are further improved by increasing the solid lubricant content. The improved coating is designated as PS-212. The same powder formulation was used to make free-standing powder metallurgy (PM-212) parts by sintering or hot isostatic pressing. The process is very attractive for making parts that cannot be readily plasma sprayed such as bushings and cylinders that have small bore diameters and/or high length to diameter ratios. The properties of coatings and free-standing parts fabricated from these powders are reviewed.

Programming and machining of complex parts based on CATIA solid modeling

NASA Astrophysics Data System (ADS)

Zhu, Xiurong

2017-09-01

The complex parts of the use of CATIA solid modeling programming and simulation processing design, elaborated in the field of CNC machining, programming and the importance of processing technology. In parts of the design process, first make a deep analysis on the principle, and then the size of the design, the size of each chain, connected to each other. After the use of backstepping and a variety of methods to calculate the final size of the parts. In the selection of parts materials, careful study, repeated testing, the final choice of 6061 aluminum alloy. According to the actual situation of the processing site, it is necessary to make a comprehensive consideration of various factors in the machining process. The simulation process should be based on the actual processing, not only pay attention to shape. It can be used as reference for machining.

Effect of Computer-Delivered Testing on Achievement in a Mastery Learning Course of Study with Partial Scoring and Variable Pacing.

ERIC Educational Resources Information Center

Evans, Richard M.; Surkan, Alvin J.

The recent arrival of portable computer systems with high-level language interpreters now makes it practical to rapidly develop complex testing and scoring programs. These programs permit undergraduates access, at arbitrary times, to testing as an integral part of a mastery learning strategy. Effects of introducing the computer were studied by…

Biostatistics primer: part I.

PubMed

Overholser, Brian R; Sowinski, Kevin M

2007-12-01

Biostatistics is the application of statistics to biologic data. The field of statistics can be broken down into 2 fundamental parts: descriptive and inferential. Descriptive statistics are commonly used to categorize, display, and summarize data. Inferential statistics can be used to make predictions based on a sample obtained from a population or some large body of information. It is these inferences that are used to test specific research hypotheses. This 2-part review will outline important features of descriptive and inferential statistics as they apply to commonly conducted research studies in the biomedical literature. Part 1 in this issue will discuss fundamental topics of statistics and data analysis. Additionally, some of the most commonly used statistical tests found in the biomedical literature will be reviewed in Part 2 in the February 2008 issue.

HullBUG Technology Development for Underwater Hull Cleaning

DTIC Science & Technology

2014-01-15

Grooming Tool would be generated. These drawings would be vended out to approved vendors for quoting. Quotes would be obtained for different levels...determined, parts would be vended out and manufactured. These parts would then be assembled at SRC. A test program would then follow to fully...identified all machined parts as well as all purchased hardware Top Assembly Based on total cost, a decision was made to make 1 grooming tool and 1

Making Links: Guidance for Summer Schools. Key Stage 3. National Strategy.

ERIC Educational Resources Information Center

Department for Education and Skills, London (England).

Summer schools are an integral part of the Key Stage 3 of England's National Literacy Strategy. They play an important role in giving students, who are still at Level 3 in the National Curriculum tests, a flying start to their secondary school career by making links between the Year 6 and Year 7 curriculum. Students are expected to achieve the…

The Independent Living Scales in civil competency evaluations: initial findings and prediction of competency adjudication.

PubMed

Quickel, Emalee J W; Demakis, George J

2013-06-01

We address a gap in the literature on civil competency by examining characteristics of those who undergo civil competency evaluations and how well Managing Money and Health and Safety subscales of the Independent Living Scales (ILS) predict legal competency adjudications. We were also interested whether these subscales are more accurate in making such predictions than the Mini-Mental State Examination and Trail-Making Test, Parts A and B, well-known measures of neuropsychological functioning. Actual legal competency decisions were obtained from public court records on 71 individuals with either mental retardation/borderline intellectual functioning (MR/BIF) or psychiatric, neurological, or combined psychiatric or neurological diagnoses. We found that those with neurological diagnoses performed significantly better on the Trail-Making Test, Part A, than the MR/BIF and combined neurological and psychiatric groups, and they demonstrated trends in the same direction for other measures. Both ILS subscales performed better than the cognitive measures, in terms of both hit rate and predictive value, in predicting ultimate judicial decision-making about competency. These findings are particularly relevant for clinicians who must decide what measures to include in an assessment battery in civil competency evaluations.

The Twenty-Foot Propeller Research Tunnel of the National Advisory Committee for Aeronautics

NASA Technical Reports Server (NTRS)

Weick, Fred E; Wood, Donald H

1929-01-01

This report describes in detail the new propeller research tunnel of the National Advisory Committee for Aeronautics at Langley Field, Va. This tunnel has an open jet air stream 20 feet in diameter in which velocities up to 110 M. P. H. Are obtained. Although the tunnel was built primarily to make possible accurate full-scale tests on aircraft propellers, it may also be used for making aerodynamic tests on full-size fuselages, landing gears, tail surfaces, and other aircraft parts, and on model wings of large size. (author)

Thyroid hormones and cognitive functioning in healthy, euthyroid women: a correlational study.

PubMed

Grigorova, Miglena; Sherwin, Barbara B

2012-04-01

Thyroid hormones (THs) play a critical role in differentiation, growth, and metabolism of animal and human organ systems, including the brain. Although associations between normal levels of THs and cognitive functions in healthy elderly individuals have been reported, the findings are inconsistent, possibly due to differences in study designs. Because thyroid disease occurs more frequently in women, the goal of the present study was to examine the relationship between levels of THs and performance on neuropsychological tests in 122 healthy, euthyroid women whose mean age was 51 years. Higher levels of free T3 were positively associated with longer completion times (slower performance) on Trail Making Test - Part A (p = 0.006) and Part B (p = 0.032) and on the Tower of London test (p = 0.002). Higher levels of thyroglobulin antibodies (TgAb) were positively correlated with more errors on the Trail Making Test Part B (p = 0.000), on the Word Fluency test (p = 0.023), and on the Design Fluency test (p = 0.045). No significant correlations between TH levels and scores on mood, verbal memory, or working memory measures were observed. The findings point to a possible link between THs and cognitive processes that are mediated primarily by frontal cortex, areas associated with executive function tasks, and suggest that elevations in levels of free T3 and TgAB within the normal range may negatively influence executive functions. Copyright © 2012 Elsevier Inc. All rights reserved.

75 FR 13009 - Procedures for Transportation Workplace Drug and Alcohol Testing Programs

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-18

... DEPARTMENT OF TRANSPORTATION Office of the Secretary 49 CFR Part 40 [Docket DOT-OST-2008-0088] RIN OST 2105-AD84 Procedures for Transportation Workplace Drug and Alcohol Testing Programs Correction In rule document 2010-3731 beginning on page 8528 in the issue of Thursday, February 25, 2010, make the...

NAEP Test-Taking Pool Grows More Inclusive

ERIC Educational Resources Information Center

Maxwell, Lesli A.; Shah, Nirvi

2011-01-01

Following a push to make "the nation's report card" better reflect the academic performance of all children in America's schools, most states boosted the numbers of students with disabilities and English-language learners who participated in the 2011 reading and math tests that are part of the National Assessment of Educational Progress (NAEP).…

Working Smarter, Not Harder (Part IV).

ERIC Educational Resources Information Center

LaBelle, Sandy

2003-01-01

Discusses ways of improving student attitudes and motivation, such as changing the focus of tests, making students responsible for their work, using a grid to show test results, instituting in-class breaks, using a personal grade book, discussing with students the effects of sleep deprivation, and using separate folders for papers of each class.…

Hot Runner Mold Design of Fan Diverter Parts

NASA Astrophysics Data System (ADS)

Juan, D. J.; Cheng, Y. L.

2017-09-01

In this study, we discuss the case of plastic parts for the production of fan steering gear shaft parts injection molding, and use POM plastic steel to produce plastic parts from traditional cold runners. Because of the parts have a hole, which need side slide. The runner produce more waste after plastic parts injection make the runner waste account for the cost is relatively high, the cost of stock preparation is relatively increased when the product quantity demanded is great. After the crushing treatment of the waste, the backfill will affect the quality, and in the crushing process, the volume generated will make the operator to withstand up to 130 dB of noise. The actual test results show that the production cycle reduce 6.25%, while the production yield increase by about 5% and material costs reduced by 2% . It can be recovered within a year, not to mention the increase of the quality and reduction the noise on the staff of the benefit is impossible to estimate.

Predicting Older Driver On-Road Performance by Means of the Useful Field of View and Trail Making Test Part B

PubMed Central

Wang, Yanning; Crizzle, Alexander M.; Winter, Sandra M.; Lanford, Desiree N.

2013-01-01

The Useful Field of View® (UFOV) and Trail Making Test Part B (Trails B) are measures of divided attention. We determined which measure was more accurate in predicting on-road outcomes among drivers (N = 198, mean age = 73.86, standard deviation = 6.05). Receiver operating characteristic curves for the UFOV (Risk Index [RI] and Subtests 1–3) and Trails B significantly predicted on-road outcomes. Contrasting Trails B with the UFOV RI and subtests, the only difference was found between the UFOV RI and Trails B, indicating the UFOV RI was the best predictor of on-road outcomes. Misclassifications of drivers totaled 28 for the UFOV RI, 62 for Trails B, and 58 for UFOV Subtest 2. The UFOV RI is a superior test in predicting on-road outcomes, but the Trails B has acceptable accuracy and is comparable to the other UFOV subtests. PMID:23968796

Distributed Wind Competitiveness Improvement Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

The Competitiveness Improvement Project (CIP) is a periodic solicitation through the U.S. Department of Energy and its National Renewable Energy Laboratory. The Competitiveness Improvement Project (CIP) is a periodic solicitation through the U.S. Department of Energy and its National Renewable Energy Laboratory. Manufacturers of small and medium wind turbines are awarded cost-shared grants via a competitive process to optimize their designs, develop advanced manufacturing processes, and perform turbine testing. The goals of the CIP are to make wind energy cost competitive with other distributed generation technology and increase the number of wind turbine designs certified to national testing standards. Thismore » fact sheet describes the CIP and funding awarded as part of the project.ufacturers of small and medium wind turbines are awarded cost-shared grants via a competitive process to optimize their designs, develop advanced manufacturing processes, and perform turbine testing. The goals of the CIP are to make wind energy cost competitive with other distributed generation technology and increase the number of wind turbine designs certified to national testing standards. This fact sheet describes the CIP and funding awarded as part of the project.« less

Why do some wood-adhesive bonds respond poorly to accelerated moisture-resistant tests?

Treesearch

Charles R. Frihart; James M. Wescott

2008-01-01

The most challenging part of developing acceptable adhesives for wood bonding often is to create a bond that will withstand exposure to wet conditions or wet/dry cycles. Products that pass these tests have been developed empirically, but the aspects that make it difficult for adhesives to pass these tests and systematically ways to develop more durable adhesive bonds...

Development and validation of a computer-based situational judgement test to assess medical students' communication skills in the field of shared decision making.

PubMed

Kiessling, Claudia; Bauer, Johannes; Gartmeier, Martin; Iblher, Peter; Karsten, Gudrun; Kiesewetter, Jan; Moeller, Grit E; Wiesbeck, Anne; Zupanic, Michaela; Fischer, Martin R

2016-11-01

To develop a computer-based test (CBT) measuring medical students' communication skills in the field of shared decision making (SDM) and to evaluate its construct validity. The CBT was developed in the context of an experimental study comparing three different trainings for SDM (including e-learning and/or role-play) and a control group. Assessment included a CBT (Part A: seven context-poor questions, Part B: 15 context-rich questions) and interviews with two simulated patients (SP-assessment). Cronbach's α was used to test the internal consistency. Correlations between CBT and SP-assessment were used to further evaluate construct validity of the CBT. Seventy-two students took part in the study. Mean value for the CBT score was 72% of the total score. Cronbach's α was 0.582. After eliminating three items, Cronbach's α increased to 0.625. Correlations between the CBT and SP-assessment were low to moderate. The control group scored significantly lower than the training settings (p<0.001). The CBT was reliable enough to test for group differences. For summative assessment purposes, considerably more questions would be needed. We encourage teachers who particularly work with large student numbers to consider CBT as a feasible assessment method for cognitive aspects of communication skills. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Pulse wave velocity and cognitive function in older adults.

PubMed

Zhong, Wenjun; Cruickshanks, Karen J; Schubert, Carla R; Carlsson, Cynthia M; Chappell, Richard J; Klein, Barbara E K; Klein, Ronald; Acher, Charles W

2014-01-01

Arterial stiffness may be associated with cognitive function. In this study, pulse wave velocity (PWV) was measured from the carotid to femoral (CF-PWV) and from the carotid to radial (CR-PWV) with the Complior SP System. Cognitive function was measured by 6 tests of executive function, psychomotor speed, memory, and language fluency. A total of 1433 participants were included (mean age 75 y, 43% men). Adjusting for age, sex, education, pulse rate, hemoglobin A1C, high-density lipoprotein cholesterol, hypertension, cardiovascular disease history, smoking, drinking, and depression symptoms, a CF-PWV>12 m/s was associated with a lower Mini-Mental State Examination score (coefficient: -0.31, SE: 0.11, P=0.005), fewer words recalled on Auditory Verbal Learning Test (coefficient: -1.10, SE: 0.43, P=0.01), and lower score on the composite cognition score (coefficient: -0.10, SE: 0.05, P=0.04) and marginally significantly associated with longer time to complete Trail Making Test-part B (coefficient: 6.30, SE: 3.41, P=0.06), CF-PWV was not associated with Trail Making Test-part A, Digit Symbol Substation Test, or Verbal Fluency Test. No associations were found between CR-PWV and cognitive performance measures. Higher large artery stiffness was associated with worse cognitive function, and longitudinal studies are needed to confirm these associations.

Color Trails Test: normative data and criterion validity for the greek adult population.

PubMed

Messinis, Lambros; Malegiannaki, Amaryllis-Chryssi; Christodoulou, Tessa; Panagiotopoulos, Vassillis; Papathanasopoulos, Panagiotis

2011-06-01

The Color Trails Test (CTT) was developed as a culturally fair analog of the Trail Making Test. In the present study, normative data for the CTT were developed for the Greek adult population and further the criterion validity of the CTT was examined in two clinical groups (29 Parkinson's disease [PD] and 25 acute stroke patients). The instrument was applied to 163 healthy participants, aged 19-75. Stepwise linear regression analyses revealed a significant influence of age and education level on completion time in both parts of the CTT (increased age and decreased educational level contributed to slower completion times for both parts), whereas gender did not influence time to completion of part B. Further, the CTT appears to discriminate adequately between the performance of PD and acute stroke patients and matched healthy controls.

Associations of Nocturnal Blood Pressure With Cognition by Self-Identified Race in Middle-Aged and Older Adults: The GENOA (Genetic Epidemiology Network of Arteriopathy) Study.

PubMed

Yano, Yuichiro; Butler, Kenneth R; Hall, Michael E; Schwartz, Gary L; Knopman, David S; Lirette, Seth T; Jones, Daniel W; Wilson, James G; Hall, John E; Correa, Adolfo; Turner, Stephen T; Mosley, Thomas H

2017-10-27

Whether the association of blood pressure (BP) during sleep (nocturnal BP) with cognition differs by race is unknown. Participants in the GENOA (Genetic Epidemiology Network of Arteriopathy) Study underwent ambulatory BP measurements, brain magnetic resonance imaging, and cognitive function testing (the Rey Auditory Verbal Learning Test, the Digit Symbol Substitution Task, and the Trail Making Test Part B) between 2000 and 2007. We examined multivariable linear regression models of the nocturnal BP-cognition association. Among 755 participants (mean age, 63 years; 64% women; 42% self-identified black race; 76% taking antihypertensive medication), mean nocturnal systolic BP (SBP)/diastolic BP was 126/69 mm Hg, daytime SBP/diastolic BP level was 139/82 mm Hg, and mean reduction in SBP from day to night (dipping) was 9%. Among the entire sample, a race interaction was observed in Digit Symbol Substitution Task and Trail Making Test Part B (both P <0.15). Race-stratified analyses showed that a 1-SD increase in nocturnal SBP levels was associated with poorer Digit Symbol Substitution Task and log-transformed Trail Making Test Part B scores (unstandardized regression coefficient [95% confidence interval]: -1.98 [-3.28 to -0.69] and 0.06 [0.004-0.12]; both P< 0.05) in black but not white individuals. Additional adjustments for white matter hyperintensity volumes or brain atrophy, measured via brain magnetic resonance imaging, did not change the results. Results were similar when nocturnal SBP dipping was assessed as the exposure, yet daytime SBP levels yielded no association with cognition. Nocturnal SBP measurements may be useful in assessing the potential risk for lower cognitive function in middle-aged and older adults, particularly in black individuals. © 2017 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley.

Lead oxide as used in lead acid storage batteries, part two

DOE Office of Scientific and Technical Information (OSTI.GOV)

Orsino, J.A.

1986-06-01

Without oxide controls, the battery manufacturing business can become one of the most confusing and frustrating experiences known. Inexplicable things happen during mixing, pasting and assembly, and testing, in the laboratory or in the field becomes an unhappy event. Almost any oxide of sufficient purity can be processed to make a good battery, but the characteristics must be known to be able to process it right, and once the process has been established, the oxide must be uniformly made to make the resulting batteries uniformly good. Fortunately, the tests required to assure uniformity are few, and simple to perform. Assumingmore » pure pig lead from primary sources or from carefully refined secondary sources, three tests can tell the whole story. These tests are described.« less

49 CFR 40.160 - What does the MRO do when a valid test result cannot be produced and a negative result is required?

Code of Federal Regulations, 2010 CFR

2010-10-01

... determine if there is clinical evidence that the individual is currently an illicit drug user. You must make... Secretary of Transportation PROCEDURES FOR TRANSPORTATION WORKPLACE DRUG AND ALCOHOL TESTING PROGRAMS...., blood) as part of the medically appropriate procedures in determining clinical evidence of drug use. (d...

Evaluation of the ARDESOS Program: An Initiative to Improve Critical Thinking Skills

ERIC Educational Resources Information Center

Saiz, Carlos; Rivas, Silvia F.

2011-01-01

It is desirable that reasoning, problem-solving and decision-making skills should form an integral part of our private and professional lives. Here we show how these skills can be improved through the use of the ARDESOS program. To test the effect of the program, we have also developed an assessment test (PENCRISAL). Our results are going in the…

76 FR 70918 - Energy Conservation Program: Test Procedures for Residential Clothes Washers

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

... DEPARTMENT OF ENERGY 10 CFR Parts 429 and 430 [Docket No. EERE-2010-BT-TP-0021] RIN 1904-AC08 Energy Conservation Program: Test Procedures for Residential Clothes Washers Correction In proposed rule document 2011-28543 appearing on pages 69870-69893 in the issue of November 9, 2011, make the following correction: On page 69870, in the first...

Older people experiencing homelessness show marked impairment on tests of frontal lobe function.

PubMed

Rogoz, Astrid; Burke, David

2016-03-01

Reported rates of mild and moderate cognitive impairment in older people experiencing homelessness range from 5-80%. The objective of this study was to determine the prevalence and characteristics of cognitive impairment in older people experiencing homelessness in the inner city of Sydney, Australia. Men and women experiencing homelessness aged 45 years and over in the inner city were screened for cognitive impairment. Participants who scored 26 or below on the mini-mental state examination and/or were impaired on any one of the clock-drawing test, the verbal fluency test and the trail-making test, part B were then assessed with a semi-structured interview, including the 21-item Depression Anxiety Stress Scale and the 12-item General Health Questionnaire. Screening of 144 men and 27 women aged between 45 years and 93 years identified cognitive impairment in 78%. Subsequently, high rates of mental and physical illness were identified, and 75% of subjects who were cognitively impaired performed poorly on frontal lobe tests. The trail-making test, part B was the most sensitive measure of frontal function. This study demonstrated that a large majority of older people experiencing homelessness, in the inner city of a high-income country, showed impairment on tests of frontal lobe function, a finding that could have significant implications for any medical or psychosocial intervention. Copyright © 2015 John Wiley & Sons, Ltd.

LIKELIHOOD RATIO TESTS OF HYPOTHESES ON MULTIVARIATE POPULATIONS, VOLUME II, TEST OF HYPOTHESIS--STATISTICAL MODELS FOR THE EVALUATION AND INTERPRETATION OF EDUCATIONAL CRITERIA. PART 4.

ERIC Educational Resources Information Center

SAW, J.G.

THIS PAPER DEALS WITH SOME TESTS OF HYPOTHESIS FREQUENTLY ENCOUNTERED IN THE ANALYSIS OF MULTIVARIATE DATA. THE TYPE OF HYPOTHESIS CONSIDERED IS THAT WHICH THE STATISTICIAN CAN ANSWER IN THE NEGATIVE OR AFFIRMATIVE. THE DOOLITTLE METHOD MAKES IT POSSIBLE TO EVALUATE THE DETERMINANT OF A MATRIX OF HIGH ORDER, TO SOLVE A MATRIX EQUATION, OR TO…

Real-time implementation of a color sorting system

NASA Astrophysics Data System (ADS)

Srikanteswara, Srikathyanyani; Lu, Qiang O.; King, William; Drayer, Thomas H.; Conners, Richard W.; Kline, D. Earl; Araman, Philip A.

1997-09-01

Wood edge glued panels are used extensively in the furniture and cabinetry industries. They are used to make doors, tops, and sides of solid wood furniture and cabinets. Since lightly stained furniture and cabinets are gaining in popularity, there is an increasing demand to color sort the parts used to make these edge glued panels. The goal of the sorting processing is to create panels that are uniform in both color and intensity across their visible surface. If performed manually, the color sorting of edge-glued panel parts is very labor intensive and prone to error. This paper describes a complete machine vision system for performing this sort. This system uses two color line scan cameras for image input and a specially designed custom computing machine to allow real-time implementation. Users define the number of color classes that are to be used. An 'out' class is provided to handle unusually colored parts. The system removes areas of character mark, e.g., knots, mineral streak, etc., from consideration when assigning a color class to a part. The system also includes a better face algorithm for determining which part face would be the better to put on the side of the panel that will show. The throughput is two linear feet per second. Only a four inch between part spacing is required. This system has undergone extensive in plant testing and will be commercially available in the very near future. The results of this testing will be presented.

An Investment Behavior Analysis using by Brain Computer Interface

NASA Astrophysics Data System (ADS)

Suzuki, Kyoko; Kinoshita, Kanta; Miyagawa, Kazuhiro; Shiomi, Shinichi; Misawa, Tadanobu; Shimokawa, Tetsuya

In this paper, we will construct a new Brain Computer Interface (BCI), for the purpose of analyzing human's investment decision makings. The BCI is made up of three functional parts which take roles of, measuring brain information, determining market price in an artificial market, and specifying investment decision model, respectively. When subjects make decisions, their brain information is conveyed to the part of specifying investment decision model through the part of measuring brain information, whereas, their decisions of investment order are sent to the part of artificial market to form market prices. Both the support vector machine and the 3 layered perceptron are used to assess the investment decision model. In order to evaluate our BCI, we conduct an experiment in which subjects and a computer trader agent trade shares of stock in the artificial market and test how the computer trader agent can forecast market price formation and investment decision makings from the brain information of subjects. The result of the experiment shows that the brain information can improve the accuracy of forecasts, and so the computer trader agent can supply market liquidity to stabilize market volatility without his loss.

Identification of an Abbreviated Test Battery for Detection of HIV-Associated Neurocognitive Impairment in an Early-Managed HIV-Infected Cohort

DTIC Science & Technology

2012-11-01

within the fronto-striatal regions (e.g., processing speed) [5–7] than cortical dementias such as Alzheimer disease. As such, traditional cognitive...Part A, PASAT, and HVLT-R Learning avoids the requirement of having the color stimuli of the Stroop tests and replaces it with the Trail Making Test...assessment time points to avoid practice effect problems; however, this would require those who administer the tests to be trained on a wider range of

[Spanish normative studies in a young adult population (NEURONORMA young adults Project): norms for the verbal span, visuospatial span, Letter-Number Sequencing, Trail Making Test and Symbol Digit Modalities Test].

PubMed

Tamayo, F; Casals-Coll, M; Sánchez-Benavides, G; Quintana, M; Manero, R M; Rognoni, T; Calvo, L; Palomo, R; Aranciva, F; Peña-Casanova, J

2012-01-01

Verbal and visuospatial span, Letter-Number Sequencing, Trail Making Test, and Symbol Digit Modalities Test are frequently used in clinical practice to assess attention, executive functions and memory. In the present study, as part of the Spanish normative studies of NEURONORMA young adults Project, normative data adjusted by age and education are provided for digits, Corsi Block-Tapping Task, Letter-Number Sequencing, Trail Making Test, and Symbol Digit Modalities Test. The sample consisted of 179 participants from 18 to 49 years old, who were cognitively normal. Tables to convert raw scores to scaled scores are provided. Age and education adjusted scores are provided by applying linear regressions. Education affected scores in most of the attention tests; age was found to be related to the visuospatial span and to speed of visuomotor tracking, and there was no relationship as regards sex. The data obtained will be useful in the clinical evaluation of young Spanish adults. Copyright © 2011 Sociedad Española de Neurología. Published by Elsevier Espana. All rights reserved.

Jesus Heard the Word of God, but Mohammed had Convulsions: How Religion Clause Principles Should Be Applied to Religion in the Public School Social Studies Curriculum.

ERIC Educational Resources Information Center

Kaiser, Elizabeth D.

2003-01-01

Discusses why public schools are making religion an important part of social-studies curriculum and why teaching of religion may create unintended constitutional violations. Explores the efficacy of current legal tests of constitutionality of religion in schools. Proposes new test for evaluating the constitutionality of religion in public-school…

Objective Analysis and Prediction Techniques.

DTIC Science & Technology

1986-11-30

contract work performance period extended from November 25, 1981 to November 24, 1986. This report consists of two parts: Part One details the results and...be added to the ELAN to make it a truly effective research tool. Also, muach more testing and streamlining should be performed to insure that Its...before performing some kind of matching. Classification of Lhe data in this manner reduces the number of data points with which we need to work from

Improving PTSD Outcomes in OIF/OEF Returnees: A Randomized Clinical Trial of Hydrocortisone Augmentation of Prolonged Exposure Therapy

DTIC Science & Technology

2012-08-01

Melissa D . Altman, PhD will ensure that the ratings are accomplished in a reasonable time frame, and make the results available to the PI and co...Glucocorticoid augmentation of prolonged exposure therapy: rationale and case report. European Journal of Traumatology. 2010(1): 5643. d . Solutions to...Brief Assessment of Cognition in Schizophrenia (BACS): Symbol-Coding Category Fluency: Animal Naming Trail Making Test: Part A Timed paper

27 CFR 19.277 - Measuring devices and proofing instruments.

Code of Federal Regulations, 2010 CFR

2010-04-01

... provide for their own use accurate hydrometers, thermometers, and other necessary equipment to determine proof or volume. (b) Instruments. Hydrometers and thermometers used by proprietors to gauge spirits... those prescribed in 27 CFR part 30. Proprietors shall make frequent tests of their hydrometers and...

Automated procedure for developing hybrid computer simulations of turbofan engines. Part 1: General description

NASA Technical Reports Server (NTRS)

Szuch, J. R.; Krosel, S. M.; Bruton, W. M.

1982-01-01

A systematic, computer-aided, self-documenting methodology for developing hybrid computer simulations of turbofan engines is presented. The methodology that is pesented makes use of a host program that can run on a large digital computer and a machine-dependent target (hybrid) program. The host program performs all the calculations and data manipulations that are needed to transform user-supplied engine design information to a form suitable for the hybrid computer. The host program also trims the self-contained engine model to match specified design-point information. Part I contains a general discussion of the methodology, describes a test case, and presents comparisons between hybrid simulation and specified engine performance data. Part II, a companion document, contains documentation, in the form of computer printouts, for the test case.

Development of a Crush and Mix Machine for Composite Brick Fabrication

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sothea, Kruy; Fazli, Nik; Hamdi, M.

2011-01-17

Currently, people are more and more concerned about the environmental protection. Municipal solid wastes (MSW) have bad effect on the environment and also human health. In addition, the amounts of municipal solid wastes are increasing due to the economic development, density of population, especially in the developing countries and they are recycled in a little percentage. To address this problem, the composite brick forming machine was designed and developed to make brick using combination of MSW and mortar. The machine consists of two independent parts, crusher and mixer part, and molding part. This paper explores the design of crusher andmore » mixer part. The crusher has ability to cut MSW such as wood, paper and plastic into small size. There are two mixers; one is used for making mortar and other use for making slurry. FEA analyses were carried out to address the suitable strength of the critical parts of the crusher which ensures that crusher can run properly with high efficiency. The experimentation of the crusher shows that it has high performance for cutting MSW. The mixers also work very well in high efficiency. The results of composite brick testing have been shown that ability of the machine can performance well. This is the innovation of crush and mix machine which is portable and economic by using MSW in replacement of sand.« less

Development of a Crush and Mix Machine for Composite Brick Fabrication

NASA Astrophysics Data System (ADS)

Sothea, Kruy; Fazli, Nik; Hamdi, M.; Aoyama, Hideki

2011-01-01

Currently, people are more and more concerned about the environmental protection. Municipal solid wastes (MSW) have bad effect on the environment and also human health. In addition, the amounts of municipal solid wastes are increasing due to the economic development, density of population, especially in the developing countries and they are recycled in a little percentage. To address this problem, the composite brick forming machine was designed and developed to make brick using combination of MSW and mortar. The machine consists of two independent parts, crusher and mixer part, and molding part. This paper explores the design of crusher and mixer part. The crusher has ability to cut MSW such as wood, paper and plastic into small size. There are two mixers; one is used for making mortar and other use for making slurry. FEA analyses were carried out to address the suitable strength of the critical parts of the crusher which ensures that crusher can run properly with high efficiency. The experimentation of the crusher shows that it has high performance for cutting MSW. The mixers also work very well in high efficiency. The results of composite brick testing have been shown that ability of the machine can performance well. This is the innovation of crush and mix machine which is portable and economic by using MSW in replacement of sand.

Pre-Flight Ground Testing of the Full-Scale HIFiRE-1 Vehicle at Fully Duplicated Flight Conditions: Part 2

DTIC Science & Technology

2008-05-14

survey rake installed in the test section to measure pitot pressure, static pressure and stagnation point heat transfer in the freestream. From these...on the cone, employing time of arrival pressure transducers to obtain 2"d mode transition frequencies, and making pitot pressure measurements to...these studies have proven to be the most accurate measurement technique in supersonic and hypersonic test facilities, and the small size of the sensing

Ethics and genomic medicine, how to navigate decisions in surgical oncology.

PubMed

Devon, Karen M; Lerner-Ellis, Jordan P; Ganai, Sabha; Angelos, Peter

2015-01-01

Using genetic information to make medical decisions and tailor treatments to individuals will likely provide major benefits and become an important part of health care. Surgical oncologists must ethically apply scientific genetic information in a complex and evolving environment to the benefit of their patients. In this review we address ethical issues associated with: indications for genetic testing, informed consent for testing and therapy, confidentiality, targeted therapy, prophylactic surgery, and genetic testing in children. © 2014 Wiley Periodicals, Inc.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Raymond H.; Stone, James; Truax, Ryan

Batch tests, column tests, and predictive reactive transport modeling can be done before ISR begins as part of the decision making/permitting process by bracketing possible post-restoration conditions; Help address stakeholder concerns; The best predictions require actual restored groundwater in contact with the downgradient solid phase; Resulting modeling provides a range of natural attenuation rates and assists with designing the best locations and time frames for continued monitoring; Field pilot tests are the best field-scale data and can provide the best model input and calibration data

Manual and computer-aided materials selection for industrial production: An exercise in decision making

NASA Technical Reports Server (NTRS)

Bates, Seth P.

1990-01-01

Students are introduced to methods and concepts for systematic selection and evaluation of materials which are to be used to manufacture specific products in industry. For this laboratory exercise, students are asked to work in groups to identify and describe a product, then to proceed through the process to select a list of three candidates to make the item from. The exercise draws on knowledge of mechanical, physical, and chemical properties, common materials test techniques, and resource management skills in finding and assessing property data. A very important part of the exercise is the students' introduction to decision making algorithms, and learning how to apply them to a complex decision making process.

Multigenerational effects of parental prenatal exposure to famine on adult offspring cognitive function

PubMed Central

Li, Jie; Na, Lixin; Ma, Hao; Zhang, Zhe; Li, Tianjiao; Lin, Liqun; Li, Qiang; Sun, Changhao; Li, Ying

2015-01-01

The effects of prenatal nutrition on adult cognitive function have been reported for one generation. However, human evidence for multigenerational effects is lacking. We examined whether prenatal exposure to the Chinese famine of 1959–61 affects adult cognitive function in two consecutive generations. In this retrospective family cohort study, we investigated 1062 families consisting of 2124 parents and 1215 offspring. We assessed parental and offspring cognitive performance by means of a comprehensive test battery. Generalized linear regression model analysis in the parental generation showed that prenatal exposure to famine was associated with a 8.1 (95% CI 5.8 to 10.4) second increase in trail making test part A, a 7.0 (1.5 to 12.5) second increase in trail making test part B, and a 5.5 (−7.3 to −3.7) score decrease in the Stroop color-word test in adulthood, after adjustment for potential confounders. In the offspring generation, linear mixed model analysis found no significant association between parental prenatal exposure to famine and offspring cognitive function in adulthood after adjustment for potential confounders. In conclusion, prenatal exposure to severe malnutrition is negatively associated with visual- motor skill, mental flexibility, and selective attention in adulthood. However, these associations are limited to only one generation. PMID:26333696

Developing and pilot testing a shared decision-making intervention for dialysis choice.

PubMed

Finderup, Jeanette; Jensen, Jens K D; Lomborg, Kirsten

2018-04-17

Evidence is inconclusive on how best to guide the patient in decision-making around haemodialysis and peritoneal dialysis choice. International guidelines recommend involvement of the patient in the decision to choose the dialysis modality most suitable for the individual patient. Nevertheless, studies have shown lack of involvement of the patient in decision-making. To develop and pilot test an intervention for shared decision-making targeting the choice of dialysis modality. This study reflects the first two phases of a complex intervention design: phase 1, the development process and phase 2, feasibility and piloting. Because decision aids were a part of the intervention, the International Patient Decision Aid Standards were considered. The pilot test included both the intervention and the feasibility of the validated shared decision-making questionnaire (SDM Q9) and the Decision Quality Measure (DQM) applied to evaluate the intervention. A total of 137 patients tested the intervention. After the intervention, 80% of the patients chose dialysis at home reflecting an increase of 23% in starting dialysis at home prior to the study. The SDM Q9 showed the majority of the patients experienced this intervention as shared decision-making. An intervention based on shared decision-making supported by decision aids seemed to increase the number of patients choosing home dialysis. The SDM Q9 and DQM were feasible evaluation tools. Further research is needed to gain insight into the patients' experiences of involvement and the implications for their choice of dialysis modality. © 2018 European Dialysis and Transplant Nurses Association/European Renal Care Association.

76 FR 10917 - Draft Regulatory Guide: Issuance, Availability

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-28

... in the agency's ``Regulatory Guide'' series. This series was developed to describe and make available... connection assemblies can perform their safety functions during and after a design-basis event. Title 10 of... Reprocessing Plants,'' Criterion III, ``Design Control,'' requires, in part, that test programs used to verify...

76 FR 16629 - Agency Forms Undergoing Paperwork Reduction Act Review

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-24

... Project Formative Research to Develop Social Marketing Campaigns--Routine HIV Testing for Emergency... formative research study to support CDC's efforts in further developing three social marketing campaigns... component of the PIC social marketing campaign is to make HIV partner services a routine part of medical...

Prevention, Not Punishment.

ERIC Educational Resources Information Center

DuPont Robert L.

2003-01-01

Describes eight suggestions for implementing a drug-testing program based on study of nine successful programs: Stress student health and safety, make it part of comprehensive education and prevention program, get it in writing, protect student privacy, focus on prevention, not punishment, involve parents and community from the start, evaluate and…

Native Intelligence

ERIC Educational Resources Information Center

Seven, Richard

2006-01-01

Amid concerns from tribal leaders that No Child Left Behind testing is squeezing out electives that have traditionally covered their history and cultures, an ambitious brace of programs is making Native America part of the core curriculum at David Wolfle Elementary School and other schools in the western Washington State. By tapping into…

The Shock and Vibration Bulletin. Part 4. Underwater Problems, Environments and Measurements

DTIC Science & Technology

1974-08-01

6585th Test Group, Holloman AFB, New Mexico FLOW-INDUCED VIBRATIONS OF A GLASS-REINFORCED PLASTIC SONAR DOME D.A. King, Rockwell International...Bolts plasticity 10 Fig 13b Fig. 13 - Underwater Explosion Experimental Results on 2.5 t Mass (Nun Linear Mount) y Energy transfer calculation...makes it possible to access the stress level which is reached in every part of the fixture system in- cluding the region of plasticity . VI

A Mobile Phone App to Support Young People in Making Shared Decisions in Therapy (Power Up): Study Protocol

PubMed Central

Martin, Kate; Webber, Helen; Craven, Michael P; Hollis, Chris; Deighton, Jessica; Law, Roslyn; Fonagy, Peter; Wolpert, Miranda

2017-01-01

Background Evidence suggests that young people want to be active participants in their care and involved in decisions about their treatment. However, there is a lack of digital shared decision-making tools available to support young people in child and adolescent mental health services (CAMHS). Objective The primary aim of this paper is to present the protocol of a feasibility trial for Power Up, a mobile phone app to empower young people in CAMHS to make their voices heard and participate in decisions around their care. Methods In the development phase, 30 young people, parents, and clinicians will take part in interviews and focus groups to elicit opinions on an early version of the app. In the feasibility testing phase, 60 young people from across 7 to 10 London CAMHS sites will take part in a trial looking at the feasibility and acceptability of measuring the impact of Power Up on shared decision making. Results Data collection for the development phase ended in December 2016. Data collection for the feasibility testing phase will end in December 2017. Conclusions Findings will inform the planning of a cluster controlled trial and contribute to the development and implementation of a shared decision-making app to be integrated into CAMHS. Trial Registration ISRCTN77194423; http://www.isrctn.com/ISRCTN77194423 (Archived by WebCite at http://www.webcitation.org/6td6MINP0). ClinicalTrials.gov NCT02987608; https://clinicaltrials.gov/ct2/show/NCT02987608 (Archived by WebCite at http://www.webcitation.org/6td6PNBZM) PMID:29084708

Cultivating Peace through Design Thinking: Problem Solving with PAST Foundation

ERIC Educational Resources Information Center

Deaner, Kat; McCreery-Kellert, Heather

2018-01-01

Design thinking is a methodology that emphasizes reasoning and decision-making as part of the problem-solving process. It is a structured framework for identifying challenges, gathering information, generating potential solutions, refining ideas, and testing solutions. Design thinking offers valuable skills that will serve students well as they…

Idea Project Final Report, A Sequential Hypothesis Testing-Based Decision-Making System For Freeway Incident Response

DOT National Transportation Integrated Search

1995-10-01

THIS INVESTIGATION WAS COMPLETED AS PART OF THE ITS-IDEA PROGRAM WHICH IS ONE OF THREE IDEA PROGRAMS MANAGED BY THE TRANSPORTATION RESEARCH BOARD (TRB) TO FOSTER INNOVATIONS IN SURFACE TRANSPORTATION. IT FOCUSES ON PRODUCTS AND RESULT FOR THE DEVELOP...

Impaired anterior swim bladder inflation following exposure to the thyroid peroxidase inhibitor 2-Mercaptobenzothiazole Part I: Fathead minnow

EPA Science Inventory

Development of adverse outcome pathways linking specific chemical-induced pathway perturbations to adverse outcomes relevant to regulatory decision-making has potential to support the development of alternatives to traditional whole organism toxicity tests, such as the fish early...

47 CFR 101.129 - Transmitter location.

Code of Federal Regulations, 2013 CFR

2013-10-01

... survey tests to be made pursuant to an experimental license under part 5 of this chapter. In such cases... data obtained from such surveys and its analysis, including a description of the methods used and the name, address and qualifications of the engineer making the survey, must be supplied to the Commission...

47 CFR 101.129 - Transmitter location.

Code of Federal Regulations, 2014 CFR

2014-10-01

... survey tests to be made pursuant to an experimental license under part 5 of this chapter. In such cases... data obtained from such surveys and its analysis, including a description of the methods used and the name, address and qualifications of the engineer making the survey, must be supplied to the Commission...

78 FR 9577 - Importation of Horses From Contagious Equine Metritis-Affected Countries

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-11

... conduct regular training of testing officials and make unscheduled visits to animal import centers... DEPARTMENT OF AGRICULTURE Animal and Plant Health Inspection Service 9 CFR Part 93 [Docket No... AGENCY: Animal and Plant Health Inspection Service, USDA. ACTION: Final rule. SUMMARY: We are adopting as...

Listening. Why? How?

ERIC Educational Resources Information Center

Chambers, Gary N.

1996-01-01

Focuses on listening activities in the second-language classroom. After discussing problems related to listening and listening as a test versus listening as a learning experience, the article suggests that the teacher exploit what is known about the language and the world to make listening part of a learning whole as opposed to a distinct…

School Democratization in Prefigurative Form: Two Brazilian Experiences

ERIC Educational Resources Information Center

McCowan, Tristan

2010-01-01

Recent moves towards greater pupil participation in school decision-making have in part been based on instrumental rationales, such as increases in test scores and improvements in behaviour. This article assesses a different approach--that of the "prefigurative"--through which the school embodies the democratic society it aims to create.…

Evaluation of Additive Manufacturing for Composite Part Molds

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duty, Chad E.; Springfield, Robert M.

2015-02-01

The ORNL Manufacturing Demonstration Facility (MDF) collaborated with Tru-Design to test the quality and durability of molds used for making fiber reinforced composites using additive manufacturing. The partners developed surface treatment techniques including epoxy coatings and machining to improve the quality of the surface finish. Test samples made using the printed and surface finished molds demonstrated life spans suitable for one-of-a-kind and low-volume applications, meeting the project objective.

Personality Module. Test Booklet. Test Items for Booklets 1, 2, 3=Modulo de personalidad. Libro de prueba. Itemes de prueba para los libros 1, 2, 3.

ERIC Educational Resources Information Center

California State Univ., Los Angeles. National Dissemination and Assessment Center.

The booklet is part of a grade 10-12 social studies series produced for bilingual education. The series consists of six major thematic modules, with four to five booklets in each. The interdisciplinary modules are based on major ideas and designed to help students understand some major human problems and make sound, responsive decisions to improve…

Stress Free Temperature Testing and Residual Stress Calculations on Out-of-Autoclave Composites

NASA Technical Reports Server (NTRS)

Cox, Sarah; Tate, LaNetra C.; Danley, Susan; Sampson, Jeff; Taylor, Brian; Miller, Sandi

2012-01-01

Future launch vehicles will require the incorporation large composite parts that will make up primary and secondary components of the vehicle. NASA has explored the feasibility of manufacturing these large components using Out-of-Autoclave impregnated carbon fiber composite systems through many composites development projects. Most recently, the Composites for Exploration Project has been looking at the development of a 10 meter diameter fairing structure, similar in size to what will be required for a heavy launch vehicle. The development of new material systems requires the investigation of the material properties and the stress in the parts. Residual stress is an important factor to incorporate when modeling the stresses that a part is undergoing. Testing was performed to verify the stress free temperature with two-ply asymmetric panels. A comparison was done between three newly developed out of autoclave IM7 /Bismalieimide (BMI) systems. This paper presents the testing results and the analysis performed to determine the residual stress of the materials.

Stress Free Temperature Testing and Calculations on Out-of-Autoclave Composites

NASA Technical Reports Server (NTRS)

Cox, Sarah B.; Tate, LeNetra C.; Danley, Susan E.; Sampson, Jeffrey W.; Taylor, Brian J.; Sutter, James K.; Miller, Sandi G.

2013-01-01

Future launch vehicles will require the incorporation of large composite parts that will make up primary and secondary components of the vehicle. NASA has explored the feasibility of manufacturing these large components using Out-of-Autoclave impregnated carbon fiber composite systems through many composites development projects. Most recently, the Composites for Exploration Project has been looking at the development of a 10 meter diameter fairing structure, similar in size to what will be required for a heavy launch vehicle. The development of new material systems requires the investigation of the material properties and the stress in the parts. Residual stress is an important factor to incorporate when modeling the stresses that a part is undergoing. Testing was performed to verify the stress free temperature with two-ply asymmetric panels. A comparison was done between three newly developed out of autoclave IM7/Bismaleimide (BMI) systems. This paper presents the testing results and the analysis performed to determine the stress free temperature of the materials

Genetic Testing and Post-Testing Decision Making among BRCA-Positive Mutation Women: A Psychosocial Approach.

PubMed

Hesse-Biber, Sharlene; An, Chen

2016-10-01

Through an analysis of an online survey of women who tested positive for the BRCA genetic mutation for breast cancer, this research uses a social constructionist and feminist standpoint lens to understand the decision-making process that leads BRCA-positive women to choose genetic testing. Additionally, this research examines how they socially construct and understand their risk for developing breast cancer, as well as which treatment options they undergo post-testing. BRCA-positive women re-frame their statistical medical risk for developing cancer and their post-testing treatment choices through a broad psychosocial context of engagement that also includes their social networks. Important psychosocial factors drive women's medical decisions, such as individual feelings of guilt and vulnerability, and the degree of perceived social support. Women who felt guilty and fearful that they might pass the BRCA gene to their children were more likely to undergo risk reducing surgery. Women with at least one daughter and women without children were more inclined toward the risk reducing surgery compared to those with only sons. These psychosocial factors and social network engagements serve as a "nexus of decision making" that does not, for the most part, mirror the medical assessments of statistical odds for hereditary cancer development, nor the specific treatment protocols outlined by the medical establishment.

The influence of a game-making project on male and female learners' attitudes to computing

NASA Astrophysics Data System (ADS)

Robertson, Judy

2013-03-01

There is a pressing need for gender inclusive approaches to engage young people in computer science. A recent popular approach has been to harness learners' enthusiasm for computer games to motivate them to learn computer science concepts through game authoring. This article describes a study in which 992 learners across 13 schools took part in a game-making project. It provides evidence from 225 pre-test and post-test questionnaires on how learners' attitudes to computing changed during the project, as well as qualitative reflections from the class teachers on how the project affected their learners. Results indicate that girls did not enjoy the experience as much as boys, and that in fact, the project may make pupils less inclined to study computing in the future. This has important implications for future efforts to engage young people in computing.

First-degree relatives of suicide completers may have impaired decision-making but functional cognitive control.

PubMed

Hoehne, A; Richard-Devantoy, S; Ding, Y; Turecki, G; Jollant, F

2015-09-01

The heritability of suicide is well established. Transmission of risk appears to follow traits more than disorders like depression. In the present project, we aimed at investigating the potential for transmission of cognitive deficits previously observed in suicide attempters, specifically impaired decision-making and cognitive control. Seventeen healthy first-degree relatives of suicide completers with no personal history of suicidal act were compared to 18 first-degree relatives of individuals with major depressive disorder but no family history of suicidal act, and 19 healthy controls. Decision-making was assessed with the Iowa Gambling Task, and cognitive control with the Stroop Task, the Hayling Sentence Completion Test, and the Trail-Making Test. Both suicide and depressed relatives showed lower gambling task net scores than healthy controls. However, there were trends toward lower learning abilities in suicide than depressed relatives (interaction: p = 0.07), with more risky choices at the end of the test. Suicide relatives also showed a higher number of self-corrected errors relative to the total number of errors in the Stroop colour test compared to both control groups, with no difference in interference scores. There was no group-difference for any other cognitive tests. Our findings suggest that decision-making impairment may be found in healthy relatives of suicides and represent a cognitive endophenotype of suicidal behaviour. Normal cognitive control (or self-corrected deficits) may protect relatives against suicidal acts. Impairments in value-based and control processes may, therefore, be part of the suicide vulnerability and represent potential targets of preventative interventions. Copyright © 2015 Elsevier Ltd. All rights reserved.

Performance deterioration due to acceptance testing and flight loads; JT90 jet engine diagnostic program

NASA Technical Reports Server (NTRS)

Olsson, W. J.

1982-01-01

The results of a flight loads test of the JT9D-7 engine are presented. The goals of this test program were to: measure aerodynamic and inertia loads on the engine during flight, explore the effects of airplane gross weight and typical maneuvers on these flight loads, simultaneously measure the changes in engine running clearances and performance resulting from the maneuvers, make refinements of engine performance deterioration prediction models based on analytical results of the tests, and make recommendations to improve propulsion system performance retention. The test program included a typical production airplane acceptance test plus additional flights and maneuvers to encompass the range of flight loads in revenue service. The test results indicated that aerodynamic loads, primarily at take-off, were the major cause of rub-indicated that aerodynamic loads, primarily at take-off, were the major cause of rub-induced deterioration in the cold sectin of the engine. Differential thermal expansion between rotating and static parts plus aerodynamic loads combined to cause blade-to-seal rubs in the turbine.

Multi-response permutation procedure as an alternative to the analysis of variance: an SPSS implementation.

PubMed

Cai, Li

2006-02-01

A permutation test typically requires fewer assumptions than does a comparable parametric counterpart. The multi-response permutation procedure (MRPP) is a class of multivariate permutation tests of group difference useful for the analysis of experimental data. However, psychologists seldom make use of the MRPP in data analysis, in part because the MRPP is not implemented in popular statistical packages that psychologists use. A set of SPSS macros implementing the MRPP test is provided in this article. The use of the macros is illustrated by analyzing example data sets.

The Mark 3 Haploscope

NASA Technical Reports Server (NTRS)

Decker, T. A.; Williams, R. E.; Kuether, C. L.; Logar, N. D.; Wyman-Cornsweet, D.

1975-01-01

A computer-operated binocular vision testing device was developed as one part of a system designed for NASA to evaluate the visual function of astronauts during spaceflight. This particular device, called the Mark 3 Haploscope, employs semi-automated psychophysical test procedures to measure visual acuity, stereopsis, phoria, fixation disparity, refractive state and accommodation/convergence relationships. Test procedures are self-administered and can be used repeatedly without subject memorization. The Haploscope was designed as one module of the complete NASA Vision Testing System. However, it is capable of stand-alone operation. Moreover, the compactness and portability of the Haploscope make possible its use in a broad variety of testing environments.

Unit: Making Life Easier, Inspection Pack, National Trial Print.

ERIC Educational Resources Information Center

Australian Science Education Project, Toorak, Victoria.

As a part of the unit materials in the series produced by the Australian Science Education Project, this teacher edition is primarily composed of three sections: a core relating to a bicycle, tests, and options. The core is concerned with basic properties of a machine such as force multiplication, speed multiplication, energy dissipation, and…

Making the Most of Multiple Choice

ERIC Educational Resources Information Center

Brookhart, Susan M.

2015-01-01

Multiple-choice questions draw criticism because many people perceive they test only recall or atomistic, surface-level objectives and do not require students to think. Although this can be the case, it does not have to be that way. Susan M. Brookhart suggests that multiple-choice questions are a useful part of any teacher's questioning repertoire…

Edison - A New Cray Supercomputer Advances Discovery at NERSC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dosanjh, Sudip; Parkinson, Dula; Yelick, Kathy

2014-02-06

When a supercomputing center installs a new system, users are invited to make heavy use of the computer as part of the rigorous testing. In this video, find out what top scientists have discovered using Edison, a Cray XC30 supercomputer, and how NERSC's newest supercomputer will accelerate their future research.

75 FR 75473 - Proposed Data Collections Submitted for Public Comment and Recommendations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-03

... Services Social Marketing Campaigns--Extension--(0920-0775, exp. 4/30/2011), National Center for HIV/AIDS... CDC-sponsored social marketing campaigns: Social Marketing Campaign to Make HIV Testing a Routine Part... living with HIV. The goal of the Partner Services component of the PIC social marketing campaign is to...

76 FR 23914 - National Organic Program; Periodic Residue Testing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-29

... Service 7 CFR Part 205 [Document Number AMS-NOP-10-0102; NOP-10-10] RIN 0581-AD10 National Organic Program... proposed rule would clarify a provision of the Organic Foods Production Act of 1990 and the regulations...) National Organic Program (NOP) regulations to make clear that accredited certifying agents must conduct...

Edison - A New Cray Supercomputer Advances Discovery at NERSC

ScienceCinema

Dosanjh, Sudip; Parkinson, Dula; Yelick, Kathy; Trebotich, David; Broughton, Jeff; Antypas, Katie; Lukic, Zarija, Borrill, Julian; Draney, Brent; Chen, Jackie

2018-01-16

When a supercomputing center installs a new system, users are invited to make heavy use of the computer as part of the rigorous testing. In this video, find out what top scientists have discovered using Edison, a Cray XC30 supercomputer, and how NERSC's newest supercomputer will accelerate their future research.

Forming Limit Diagram of Titanium and Stainless Steel Alloys to Study the Formability of Hydro-Mechanical Deep Drawing Parts

NASA Astrophysics Data System (ADS)

Shirizly, A.

2005-08-01

The increase demand for stronger, lighter and economic sheet metal products, make the Hydromecanical deep drawing process lately more and more popular. The Hydromecanical process is used in almost all types of sheet metal parts from home appliances and kitchenware to automotive and aviation industries. Therefore, many common materials were tested and characterized by their ability to sustain large strains via the well known Forming Limit Diagram (FLD). The aim of this work is to examine the forming capability if the Hydromecanical process in production of hemisphere parts made of materials commonly used in the aviation and aerospace industries. Experimental procedures were carried out to assess their ductility through FLD and the Forming Limit Carve (FLC).Two type of material sheets were tested herewith for demonstrating the procedure: commercial pure titanium and stainless steel 316L. A numerical simulation of the Hydromecanical process was examined and compared to self made Hydromecanical deep drawing of hemispherical parts.

Segmentation algorithm of colon based on multi-slice CT colonography

NASA Astrophysics Data System (ADS)

Hu, Yizhong; Ahamed, Mohammed Shabbir; Takahashi, Eiji; Suzuki, Hidenobu; Kawata, Yoshiki; Niki, Noboru; Suzuki, Masahiro; Iinuma, Gen; Moriyama, Noriyuki

2012-02-01

CT colonography is a radiology test that looks at people's large intestines(colon). CT colonography can screen many options of colon cancer. This test is used to detect polyps or cancers of the colon. CT colonography is safe and reliable. It can be used if people are too sick to undergo other forms of colon cancer screening. In our research, we proposed a method for automatic segmentation of the colon from abdominal computed Tomography (CT) images. Our multistage detection method extracted colon and spited colon into different parts according to the colon anatomy information. We found that among the five segmented parts of the colon, sigmoid (20%) and rectum (50%) are more sensitive toward polyps and masses than the other three parts. Our research focused on detecting the colon by the individual diagnosis of sigmoid and rectum. We think it would make the rapid and easy diagnosis of colon in its earlier stage and help doctors for analysis of correct position of each part and detect the colon rectal cancer much easier.

Planning and conducting meetings effectively, part I: planning a meeting.

PubMed

Harolds, Jay

2011-12-01

Meetings are held by leaders for many purposes, including conveying information, raising morale, asking for opinions, brain storming, making people part of the problem-solving process, building trust, getting to a consensus, and making decisions. However, many meetings waste time, some undermine the leader's power, and some decrease morale. Part I of this series of articles gives some tips on basic planning for decision-making meetings. Part II of this series of articles analyzes selected components of decision-making meetings. Part III of this series will be on how the chairperson keeps decision-making meetings on track to make them efficient and productive.

Health-Related Decision-Making in HIV Disease

PubMed Central

Doyle, Katie L.; Woods, Steven Paul; Morgan, Erin E.; Iudicello, Jennifer E.; Cameron, Marizela V.; Gilbert, Paul E.; Beltran, Jessica

2016-01-01

Individuals living with HIV show moderate decision-making deficits, though no prior studies have evaluated the ability to make optimal health-related decisions across the HIV healthcare continuum. Forty-three HIV+ individuals with HIV−associated neurocognitive disorders (HAND+), 50 HIV+ individuals without HAND (HAND−), and 42 HIV− participants were administered two measures of health-related decision-making as part of a comprehensive neuropsychological battery: 1) The Decisional Conflict Scale (DCS), and 2) The Modified UCSD Brief Assessment for Capacity to Consent (UBACC-T). Multiple regression analyses revealed that HAND was an independent predictor of both the DCS and the UBACC-T, such that the HAND+ sample evidenced significantly poorer scores relative to comparison groups. Within the HIV+ sample, poorer health-related decision-making was associated with worse performance on tests of episodic memory, risky decision-making, and health literacy. Findings indicate that individuals with HAND evidence moderate deficits in effectively comprehending and evaluating various health-related choices. PMID:26946300

Out-of-Autoclave Manufacturing of Aerospace Representative Parts

NASA Astrophysics Data System (ADS)

Cauberghs, Julien

The use of carbon fibre reinforced composites for aerospace structures has seen a high increase in recent years, and is still growing. The high stiffness-to-weight ratio of these materials makes them ideal for primary structures on airplanes, satellites, and spacecrafts. Nevertheless, the manufacturing of composites remains very costly since it requires equipment investment such as an autoclave, and very qualified workers. Out-of-autoclave manufacturing technology is very promising since it only requires a traditional oven, while still aiming at similar part quality. However, the absence of positive pressure compared with an autoclave makes it more difficult to achieve low porosity parts. This research investigates the manufacturing of complex features with out-of autoclave prepreg technology. The features studied are tight-radius corners with a curvature change, and ply drop-offs. Ply drop-offs tests were conducted to identify if porosity is higher at ply terminations. In corners, the bagging arrangement was modified to achieve the most uniform thickness in areas of curvature change, even with small radii. The conclusions from these studies provided us with guidelines to manufacture larger representative parts, which included these features. The representative parts were tested for porosity, thickness uniformity, mechanical performance, and glass transition temperature (Tg). A total of four representative parts were manufactured with out-of-autoclave technology, and one more was manufactured with an autoclave to allow for a proper comparison between the two processes. The materials used were MTM45-1 5 harness satin and CYCOM5320 plain weave for the out-of-autoclave parts, and CYCOM5276-1 plain weave for the autoclave part. The effect of ply drop-offs on porosity was found to be negligible. Thickness deviation in corners was attributed to a combination of consumable bridging, prepreg's bulk factor and inter-ply shear. Overall, out-of-autoclave prepregs showed performance similar to autoclave prepregs.

Local density measurement of additive manufactured copper parts by instrumented indentation

NASA Astrophysics Data System (ADS)

Santo, Loredana; Quadrini, Fabrizio; Bellisario, Denise; Tedde, Giovanni Matteo; Zarcone, Mariano; Di Domenico, Gildo; D'Angelo, Pierpaolo; Corona, Diego

2018-05-01

Instrumented flat indentation has been used to evaluate local density of additive manufactured (AM) copper samples with different relative density. Indentations were made by using tungsten carbide (WC) flat pins with 1 mm diameter. Pure copper powders were used in a selective laser melting (SLM) machine to produce samples to test. By changing process parameters, samples density was changed from the relative density of 63% to 71%. Indentation tests were performed on the xy surface of the AM samples. In order to make a correlation between indentation test results and sample density, the indentation pressure at fixed displacement was selected. Results show that instrumented indentation is a valid technique to measure density distribution along the geometry of an SLM part. In fact, a linear trend between indentation pressure and sample density was found for the selected density range.

40 CFR Appendix C to Part 60 - Determination of Emission Rate Change

Code of Federal Regulations, 2011 CFR

2011-07-01

... emission rate to the atmosphere. The method used is the Student's t test, commonly used to make inferences.... EC01JN92.294 3.5 Calculate the test statistic, t, using Equation 4. EC01JN92.295 4.Results 4.1If E b>,E a... occurred. Table 1 Degrees of freedom (n a=n b−2) t′ (95 percent confidence level) 2 2.920 3 2.353 4 2.132 5...

DoD Needs to Improve Oversight of the Afghan National Police Training/Mentoring and Logistics Support Contract

DTIC Science & Technology

2013-06-25

test Waste Water Treatment Plant” because no testing kit was onsite. The COR additionally stated he identified failed equipment and the contractor...Officer ( PCO ) confirmed with the previous ACC-Rl PCO and neither recall ever making this statement. The previous PCO recalls discussing that a QASP...performance surveillance and have access to all contract documents. Adequate contract oversight is always a concern of the PCO , in part due to the

Economic Organization Module. Test Booklet. Test Items for Booklets 1, 2, 3=Libro de prueba. Modulo de organizacion economica. Itemes de prueba para los libros 1, 2, 3.

ERIC Educational Resources Information Center

California State Univ., Los Angeles. National Dissemination and Assessment Center.

The booklet is part of a grade 10-12 social studies series produced for bilingual education. The series consists of six major thematic modules, with four to five booklets in each. The interdisciplinary modules are based on major ideas and designed to help students understand some major human problems and make sound, responsive decisions to improve…

Environment Module. Test Booklet. Test Items for Booklets 1, 2, 3, 4=Libro de prueba. Modulo del medio ambiente. Itemes de prueba para los libros 1, 2, 3, 4.

ERIC Educational Resources Information Center

California State Univ., Los Angeles. National Dissemination and Assessment Center.

The booklet is part of a grade 10-12 social studies series produced for bilingual education. The series consists of six major thematic modules, with four to five booklets in each. The interdisciplinary modules are based on major ideas and are designed to help students understand some major human problems and make sound, responsive decisions to…

[Multi-central controlled study on three-part massage therapy for treatment of insomnia of deficiency of both the heart and spleen].

PubMed

Zhou, Yun-feng; Wei, Yu-long; Zhang, Pu-lin; Gao, Shan; Ning, Guo-li; Zhang, Zhen-qiang; Hu, Bin; Wang, Dan-yi; Yan, Mei-rong; Liu, Wen-jun

2006-06-01

To make multi-central clinical evaluation for three-part massage therapy for treatment of insomnia of deficiency of both the heart and spleen. One hundred and sixty-six cases were randomly divided into a test group (n = 84) and a control group (n = 82). Multi-central, randomized and controlled methods were adopted. The test group were treated by the three-part massage therapy, i. e. acupoints at the head, abdomen and back were massaged, once each day; and the control group by oral administration of Guipi Pills [symbol: see text], 8 pills each time, thrice daily. The treatment was given for 15 consecutive days and then the therapeutic effects were observed. Sixty-seven cases were cured, 11 markedly effective, 3 effective, and 3 ineffective in the test group, and the corresponding figures were 10, 21, 29 and 22 in the control group with a very significant difference between the two groups (P< 0.001). The test group was superior to the control group in improvement for Pittsburgh Sleep Quality Index (PSQI), Sleepless Anxiety Scale (SAS) and Sleepless Depression Scale (SDS) (P < 0.001). The three-part massage therapy has definite therapeutic effect on insomnia of deficiency of both the heart and spleen with safety.

Using cognitive status to predict crash risk: blazing new trails?

PubMed

Staplin, Loren; Gish, Kenneth W; Sifrit, Kathy J

2014-02-01

A computer-based version of an established neuropsychological paper-and-pencil assessment tool, the Trail-Making Test, was applied with approximately 700 drivers aged 70 years and older in offices of the Maryland Motor Vehicle Administration. This was a volunteer sample that received a small compensation for study participation, with an assurance that their license status would not be affected by the results. Analyses revealed that the study sample was representative of Maryland older drivers with respect to age and indices of prior driving safety. The relationship between drivers' scores on the Trail-Making Test and prospective crash experience was analyzed using a new outcome measure that explicitly takes into account error responses as well as correct responses, the error-compensated completion time. For the only reliable predictor of crash risk, Trail-Making Test Part B, this measure demonstrated a modest gain in specificity and was a more significant predictor of future safety risk than the simple time-to-completion measure. Improved specificity and the potential for autonomous test administration are particular advantages of this measure for use with large populations, in settings such as health care or driver licensing. © 2013.

Hatha Yoga Practice Improves Attention and Processing Speed in Older Adults: Results from an 8-Week Randomized Control Trial.

PubMed

Gothe, Neha P; Kramer, Arthur F; McAuley, Edward

2017-01-01

Age-related cognitive decline is well documented across various aspects of cognitive function, including attention and processing speed, and lifestyle behaviors such as physical activity play an important role in preventing cognitive decline and maintaining or even improving cognitive function. The purpose of this study was to evaluate the effects of an 8-week Hatha yoga intervention on attention and processing speed among older adults. Participants (n = 118; mean age, 62 ± 5.59) were randomly assigned to an 8-week Hatha yoga group or a stretching control group and completed cognitive assessments-Attention Network Task, Trail Making Test parts A and B, and Pattern Comparison Test-at baseline and after the 8-week intervention. Analyses of covariance revealed significantly faster reaction times for the yoga group on the Attention Network Task's neutral, congruent, and incongruent conditions (p ≤ 0.04). The yoga intervention also improved participants' visuospatial and perceptual processing on the Trail Making Test part B (p = 0.002) and pattern comparison (p < 0.001) tests. These results suggest that yoga practice that includes postures, breathing, and meditative exercises lead to improved attentional and information processing abilities. Although the underlying mechanisms remain largely speculative, more systematic trials are needed to explore the extent of cognitive benefits and their neurobiological mechanisms.

Impact of poor sleep quality and physical inactivity on cognitive function in community-dwelling older adults.

PubMed

Nakakubo, Sho; Makizako, Hyuma; Doi, Takehiko; Tsutsumimoto, Kota; Lee, Sangyoon; Lee, Sungchul; Hotta, Ryo; Bae, Seongryu; Suzuki, Takao; Shimada, Hiroyuki

2017-11-01

The purpose of the present study was to examine whether the combination of subjective sleep quality and physical activity is associated with cognitive performance among community-dwelling older adults. Cross-sectional data on 5381 older adults who participated in part of the National Center for Geriatrics and Gerontology - Study of Geriatric Syndromes were analyzed. We assessed general cognitive impairment using the Mini-Mental State Examination, and also assessed story memory, attention, executive function and processing speed using the National Center for Geriatrics and Gerontology Functional Assessment Tool. Physical activity was assessed using two questionnaires, and participants were categorized as active or inactive. Sleep quality was assessed using the Pittsburgh Sleep Quality Index, and participants were categorized as having poor (PS) or good sleep quality (GS). Participants in the inactive + PS group had worse performances than those in the active + GS group in all cognitive measures (Mini-Mental State Examination: P = 0.008, story memory: P = 0.007, other cognitive measures: P < 0.001), and also had worse performances than those in the inactive + GS and active + PS groups in the trail-making test, part B, and the symbol digit substitution test (P < 0.001, respectively). Additionally, participants in the inactive + GS group had worse performances than in the active + GS in the trail-making test, part B, and the symbol digit substitution test (P = 0.002 and P = 0.001, respectively). Inactivity and poor sleep quality were associated with poor cognitive performance among community-dwelling older adults. The combination of poor sleep quality and physical inactivity also worsened cognitive performance. Geriatr Gerontol Int 2017; 17: 1823-1828. © 2017 Japan Geriatrics Society.

Scan-Based Implementation of JPEG 2000 Extensions

NASA Technical Reports Server (NTRS)

Rountree, Janet C.; Webb, Brian N.; Flohr, Thomas J.; Marcellin, Michael W.

2001-01-01

JPEG 2000 Part 2 (Extensions) contains a number of technologies that are of potential interest in remote sensing applications. These include arbitrary wavelet transforms, techniques to limit boundary artifacts in tiles, multiple component transforms, and trellis-coded quantization (TCQ). We are investigating the addition of these features to the low-memory (scan-based) implementation of JPEG 2000 Part 1. A scan-based implementation of TCQ has been realized and tested, with a very small performance loss as compared with the full image (frame-based) version. A proposed amendment to JPEG 2000 Part 2 will effect the syntax changes required to make scan-based TCQ compatible with the standard.

A Mobile Phone App to Support Young People in Making Shared Decisions in Therapy (Power Up): Study Protocol.

PubMed

Chapman, Louise; Edbrooke-Childs, Julian; Martin, Kate; Webber, Helen; Craven, Michael P; Hollis, Chris; Deighton, Jessica; Law, Roslyn; Fonagy, Peter; Wolpert, Miranda

2017-10-30

Evidence suggests that young people want to be active participants in their care and involved in decisions about their treatment. However, there is a lack of digital shared decision-making tools available to support young people in child and adolescent mental health services (CAMHS). The primary aim of this paper is to present the protocol of a feasibility trial for Power Up, a mobile phone app to empower young people in CAMHS to make their voices heard and participate in decisions around their care. In the development phase, 30 young people, parents, and clinicians will take part in interviews and focus groups to elicit opinions on an early version of the app. In the feasibility testing phase, 60 young people from across 7 to 10 London CAMHS sites will take part in a trial looking at the feasibility and acceptability of measuring the impact of Power Up on shared decision making. Data collection for the development phase ended in December 2016. Data collection for the feasibility testing phase will end in December 2017. Findings will inform the planning of a cluster controlled trial and contribute to the development and implementation of a shared decision-making app to be integrated into CAMHS. ISRCTN77194423; http://www.isrctn.com/ISRCTN77194423 (Archived by WebCite at http://www.webcitation.org/6td6MINP0). ClinicalTrials.gov NCT02987608; https://clinicaltrials.gov/ct2/show/NCT02987608 (Archived by WebCite at http://www.webcitation.org/6td6PNBZM). ©Louise Chapman, Julian Edbrooke-Childs, Kate Martin, Helen Webber, Michael P Craven, Chris Hollis, Jessica Deighton, Roslyn Law, Peter Fonagy, Miranda Wolpert. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 30.10.2017.

Utility of behavioral versus cognitive measures in differentiating between subtypes of frontotemporal lobar degeneration and Alzheimer's disease.

PubMed

Heidler-Gary, Jennifer; Gottesman, Rebecca; Newhart, Melissa; Chang, Shannon; Ken, Lynda; Hillis, Argye E

2007-01-01

We hypothesized that a modified version of the Frontal Behavioral Inventory (FBI-mod), along with a few cognitive tests, would be clinically useful in distinguishing between clinically defined Alzheimer's disease (AD) and subtypes of frontotemporal lobar degeneration (FTLD): frontotemporal dementia (dysexecutive type), progressive nonfluent aphasia, and semantic dementia. We studied 80 patients who were diagnosed with AD (n = 30) or FTLD (n = 50), on the basis of a comprehensive neuropsychological battery, imaging, neurological examination, and history. We found significant between-group differences on the FBI-mod, two subtests of the Rey Auditory Verbal Learning Test (verbal learning and delayed recall), and the Trail Making Test Part B (one measure of 'executive functioning'). AD was characterized by relatively severe impairment in verbal learning, delayed recall, and executive functioning, with relatively normal scores on the FBI-mod. Frontotemporal dementia was characterized by relatively severe impairment on the FBI-mod and executive functioning in the absence of severe impairment in verbal learning and recall. Progressive nonfluent aphasia was characterized by severe impairment in executive functioning with relatively normal scores on verbal learning and recall and FBI-mod. Finally, semantic dementia was characterized by relatively severe deficits in delayed recall, but relatively normal performance on new learning, executive functioning, and on FBI-mod. Discriminant function analysis confirmed that the FBI-mod, in conjunction with the Rey Auditory Verbal Learning Test, and the Trail Making Test Part B categorized the majority of patients as subtypes of FTLD or AD in the same way as a full neuropsychological battery, neurological examination, complete history, and imaging. These tests may be useful for efficient clinical diagnosis, although progressive nonfluent aphasia and semantic dementia are likely to be best distinguished by language tests not included in standard neuropsychological test batteries.

Aerobots as a Ubiquitous Part of Society

NASA Technical Reports Server (NTRS)

Young, Larry A.

2006-01-01

Small autonomous aerial robots (aerobots) have the potential to make significant positive contributions to modern society. Aerobots of various vehicle-types - CTOL, STOL, VTOL, and even possibly LTA - will be a part of a new paradigm for the distribution of goods and services. Aerobots as a class of vehicles may test the boundaries of aircraft design. New system analysis and design tools will be required in order to account for the new technologies and design parameters/constraints for such vehicles. The analysis tools also provide new approaches to defining/assessing technology goals and objectives and the technology portfolio necessary to accomplish those goals and objectives. Using the aerobot concept as an illustrative test case, key attributes of these analysis tools are discussed.

System Testing of Ground Cooling System Components

NASA Technical Reports Server (NTRS)

Ensey, Tyler Steven

2014-01-01

This internship focused primarily upon software unit testing of Ground Cooling System (GCS) components, one of the three types of tests (unit, integrated, and COTS/regression) utilized in software verification. Unit tests are used to test the software of necessary components before it is implemented into the hardware. A unit test determines that the control data, usage procedures, and operating procedures of a particular component are tested to determine if the program is fit for use. Three different files are used to make and complete an efficient unit test. These files include the following: Model Test file (.mdl), Simulink SystemTest (.test), and autotest (.m). The Model Test file includes the component that is being tested with the appropriate Discrete Physical Interface (DPI) for testing. The Simulink SystemTest is a program used to test all of the requirements of the component. The autotest tests that the component passes Model Advisor and System Testing, and puts the results into proper files. Once unit testing is completed on the GCS components they can then be implemented into the GCS Schematic and the software of the GCS model as a whole can be tested using integrated testing. Unit testing is a critical part of software verification; it allows for the testing of more basic components before a model of higher fidelity is tested, making the process of testing flow in an orderly manner.

Lunar Science: Using the Moon as a Testbed

NASA Technical Reports Server (NTRS)

Taylor, G. J.

1993-01-01

The Moon is an excellent test bed for innovative instruments and spacecraft. Excellent science can be done, the Moon has a convenient location, and previous measurements have calibrated many parts of it. I summarize these attributes and give some suggestions for the types of future measurements. The Lunar Scout missions planned by NASA's Office of Exploration will not make all the measurements needed. Thus, test missions to the Moon can also return significant scientific results, making them more than technology demonstrations. The Moon is close to Earth, so cruise time is insignificant, tracking is precise, and some operations can be controlled from Earth, but it is in the deep space environment, allowing full tests of instruments and spacecraft components. The existing database on the Moon allows tests of new instruments against known information. The most precise data come from lunar samples, where detailed analyses of samples from a few places on the Moon provide data on chemical and mineralogical composition and physical properties.

Study on the applicability of a precise, accurate method for rapid evaluation of engine and lubricant performance. [determination of wear metal in used lubricating oils

NASA Technical Reports Server (NTRS)

Kinard, J. T.

1975-01-01

The development of a procedure for obtaining data related to wear metal determinations in used lubricants is discussed. The procedure makes it possible to obtain rapid, simultaneous determinations of a number of wear metals at levels of parts per thousand to low parts per billion using a small amount of sample. The electrode assembly and instrumentation used in the process are described. Samples of data obtained from tests conducted under controlled conditions are tabulated.

Culture and Social Organization Module. Test Booklet. Test Items for Booklets 1, 2, 3, 4=Libro de prueba. Modulo de cultura y organizacion social. Itemes de prueba para los libros 1, 2, 3, 4.

ERIC Educational Resources Information Center

California State Univ., Los Angeles. National Dissemination and Assessment Center.

The booklet is part of a grade 10-12 social studies series produced for bilingual education. The series consists of six major thematic modules, with four to five booklets in each. The interdisciplinary modules are based on major ideas and are designed to help students understand some major human problems and make sound, responsive decisions to…

78 FR 285 - Supplemental Final Environmental Impact Statement for Healy Power Generation Unit #2, Healy, AK

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-03

... Valley Electric Association (GVEA) since 1967. Healy Unit 2 is a 50 MW coal- fired steam generator owned by AIDEA, which underwent test operation for two years as part of DOE's Clean Coal Technology Program... RUS. The RUS Electric Program is authorized to make loans and loan guarantees that finance the...

Wives, Husbands, and Hidden Power in Marriage

ERIC Educational Resources Information Center

Zipp, John F.; Prohaska, Ariane; Bemiller, Michelle

2004-01-01

A recurrent theme in scholarship on gender and the family is the asymmetry between husbands and wives on decision making, the division of household labor, child care, and so forth. In this article, the authors tested to see if this asymmetry can be explained, in part, by taking into account the invisible power of men. Using data from the third…

Ethics and Personality: Empathy and Narcissism as Moderators of Ethical Decision Making in Business Students

ERIC Educational Resources Information Center

Brown, Todd A.; Sautter, John A.; Littvay, Levente; Sautter, Alberta C.; Bearnes, Brennen

2010-01-01

Many studies have reported that business students have been more apt to act in self-interested ways when compared to their counterparts in other academic fields. Beginning with the premise that ethical behavior derives in part from personality characteristics, the authors tested whether (a) measures of an empathetic or narcissistic personality…

32 CFR Appendix A to Part 68 - DOD Voluntary Education Partnership Memorandum of Understanding (MOU) Between DoD Office of the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... multimedia) and correspondence courses. d. This MOU includes high school programs, academic skills programs... competency testing; make course placement based on student readiness. (8) Designate a person or office at the... eliminate aggressive marketing aimed at Service members. h. Refrain from high-pressure recruitment tactics...

Making history: Field testing of blight-resistant American chestnut (Castanea dentata) in the Southern Region

Treesearch

Stacy L. Clark; Scott E. Schlarbaum; A.M. Saxton; Fred V. Hebard

2011-01-01

The American chestnut (Castanea dentata Marsh. Borkh.) was decimated by an exotic fungus (chestnut blight [Cryphonectria parasitica Murr. Bar]) in the early part of the 20th century. The American Chestnut Foundation (TACF) uses a back-cross breeding program to produce a tree that is predicted to be American chestnut in character...

Design and implementation of a general and automatic test platform base on NI PXI system

NASA Astrophysics Data System (ADS)

Shi, Long

2018-05-01

Aiming at some difficulties of test equipment such as the short product life, poor generality and high development cost, a general and automatic test platform base on NI PXI system is designed in this paper, which is able to meet most test requirements of circuit boards. The test platform is devided into 5 layers, every layer is introduced in detail except for the "Equipment Under Test" layer. An output board of a track-side equipment, which is an important part of high speed train control system, is taken as an example to make the functional circuit test by the test platform. The results show that the test platform is easy to realize add-on functions development, automatic test, wide compatibility and strong generality.

Corrosion Characterization in Nickel Plated 110 ksi Low Alloy Steel and Incoloy 925: An Experimental Case Study

NASA Astrophysics Data System (ADS)

Thomas, Kiran; Vincent, S.; Barbadikar, Dipika; Kumar, Shresh; Anwar, Rebin; Fernandes, Nevil

2018-04-01

Incoloy 925 is an age hardenable Nickel-Iron-Chromium alloy with the addition of Molybdenum, Copper, Titanium and Aluminium used in many applications in oil and gas industry. Nickel alloys are preferred mostly in corrosive environments where there is high concentration of H2S, CO2, chlorides and free Sulphur as sufficient nickel content provides protection against chloride-ion stress-corrosion cracking. But unfortunately, Nickel alloys are very expensive. Plating an alloy steel part with nickel would cost much lesser than a part make of nickel alloy for large quantities. A brief study will be carried out to compare the performance of nickel plated alloy steel with that of an Incoloy 925 part by conducting corrosion tests. Tests will be carried out using different coating thicknesses of Nickel on low alloy steel in 0.1 M NaCl solution and results will be verified. From the test results we can confirm that Nickel plated low alloy steel is found to exhibit fairly good corrosion in comparison with Incoloy 925 and thus can be an excellent candidate to replace Incoloy materials.

Comparison of Signal Response Between EDM Notch and Cracks in Eddy-Current Testing

NASA Technical Reports Server (NTRS)

Kane, Mary; Koshti, Ajay

2008-01-01

In the field of ET an eddy-current instrument is calibrated on a manufactured notch that is designed to simulate a defect in a part. The calibrated instrument is then used to scan parts with the assumption that any response that is over half the amplitude of the notch signal is taken to be defective. The purpose of this study is to attempt a direct comparison of the signal response observed from an EDM notch to a crack of the same size. To make this comparison test equipment will be set up and calibrated as per normal inspection procedures. Once this has been achieved both notches and as many different sizes of crack specimens will be scanned and the data recorded. This data will then be analyzed to provide a comparison of the response. The results should also provide information that shows it is acceptable to use the half-amplitude method for determining if a part is defective. The tests will be performed on two different materials commonly inspected, titanium and aluminum. This will allow a comparison of the results between materials.

Taking the fifth amendment in Turing's imitation game

NASA Astrophysics Data System (ADS)

Warwick, Kevin; Shah, Huma

2017-03-01

In this paper, we look at a specific issue with practical Turing tests, namely the right of the machine to remain silent during interrogation. In particular, we consider the possibility of a machine passing the Turing test simply by not saying anything. We include a number of transcripts from practical Turing tests in which silence has actually occurred on the part of a hidden entity. Each of the transcripts considered here resulted in a judge being unable to make the 'right identification', i.e., they could not say for certain which hidden entity was the machine.

MRI and Neuropsychological Correlates in African Americans with Hypertension and left vEntricular Hypertrophy.

PubMed

Waldron-Perrine, B; Kisser, J E; Brody, A; Haacke, E M; Dawood, R; Millis, S; Levy, P

2018-04-17

African Americans (AA) are at high risk for hypertension (HTN) and poor blood pressure (BP) control. Persistently elevated BP contributes to cardiovascular morbidity. White matter hyperintensities (WMH) are a definable magnetic resonance imaging (MRI) marker of cerebrovascular injury linked to impairments in higher level thinking (i.e., executive functions), memory formation and speed of perceptual-motor processing. This sub-investigation evaluated neuropsychological functioning in association with WMH on brain MRIs in 23 otherwise healthy hypertensive AAs participating in an NIH-funded study of the effects of Vitamin D on BP and cardiac remodeling in AA patients 30-74 years of age with HTN and left ventricular hypertrophy. Neuropsychological assessment included psychomotor processing speed [(Symbol Digit Modality Test (SDMT) and Trail Making Test], executive functioning (Controlled Oral Word Association Test and Trail Making Test Part B), memory (Rey Auditory Verbal Learning Test), and fine motor functioning (Finger Tapping). Significant correlations (p< .05) were found between volume of periventricular lesions and Trails A (r = .51) and dominant hand finger tapping speed (r = -.69) and between subcortical lesion volume and Trails A (r = .60), both dominant (r = -.62) and non-dominant hand finger tapping speed (r = -.76) and oral SDMT (r = -.60); higher lesion volumes correlated to worse neuropsychological performance. Psychomotor tests including the Trail Making Test and finger tapping speed are sensitive indicators of subclinical deficits in mental processing speed and could serve as early markers of deep subcortical cerebrovascular injury in otherwise-healthy individuals with uncontrolled chronic HTN.

Neuropsychology of domestic violence: a comparative preliminary study of executive functioning.

PubMed

Becerra-García, Juan Antonio

2015-01-01

In neuropsychological studies of executive functioning in domestic violence offenders, the different investigations conducted have only studied differences within this group or in relation to control groups of non-offenders. To minimize the limitations in relation to comparison groups, the purpose of this study was to compare executive functioning in domestic violence offenders in relation to different groups of offenders (i.e. sexual, violent and non-violent) and a control group of non-offenders, with all groups matched on socio-demographic and clinical characteristics. Executive functioning was tested of all participants with the Trail Making Test (direct and derived scores). Compared with the control group, the domestic violence offenders and sex offenders exhibited the poorest performance on the Trail Making Test part B (time) and on the B-A derived index; whereas, the violent offenders group (i.e. convicted of assault, wounding, homicide etc.) showed a high number of errors in part B. These findings suggest that domestic violence offenders exhibit similar performance on the TMT as sex offenders, where both have poorer cognitive flexibility and executive control. Other violent offenders exhibited different patterns of difficulty on this test (e.g. more impulsivity responses). Executive functioning may be a central psychological process that could help explain the interrelations between domestic and sexual aggression, and could be a relevant construct for common treatment of domestic batterers and sex offenders. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Behavioral variant frontotemporal dementia patients do not succumb to the Allais paradox.

PubMed

Bertoux, Maxime; Cova, Florian; Pessiglione, Mathias; Hsu, Ming; Dubois, Bruno; Bourgeois-Gironde, Sacha

2014-01-01

The Allais Paradox represents one of the earliest empirical challenges to normative models of decision-making, and suggests that choices in one part of a gamble may depend on the possible outcome in another, independent, part of the gamble-a violation of the so-called "independence axiom." To account for Allaisian behavior, one well-known class of models propose that individuals' choices are influenced not only by possible outcomes resulting from one's choices, but also the anticipation of regret for foregone options. Here we test the regret hypothesis using a population of patients with behavioral variant frontotemporal dementia (bvFTD), a clinical population known to present ventromedial prefrontal cortex dysfunctions and associated with impaired regret processing in previous studies of decision-making. Compared to matched controls and Alzheimer's disease (AD) patients, we found a striking diminution of Allaisian behavior among bvFTD patients. These results are consistent with the regret hypothesis and furthermore suggest a crucial role for prefrontal regions in choices that typically stands in contradiction with a basic axiom of rational decision-making.

Automated plasma control with optical emission spectroscopy

NASA Astrophysics Data System (ADS)

Ward, P. P.

Plasma etching and desmear processes for printed wiring board (PWB) manufacture are difficult to predict and control. Non-uniformity of most plasma processes and sensitivity to environmental changes make it difficult to maintain process stability from day to day. To assure plasma process performance, weight loss coupons or post-plasma destructive testing must be used. These techniques are not real-time methods however, and do not allow for immediate diagnosis and process correction. These tests often require scrapping some fraction of a batch to insure the integrity of the rest. Since these tests verify a successful cycle with post-plasma diagnostics, poor test results often determine that a batch is substandard and the resulting parts unusable. These tests are a costly part of the overall fabrication cost. A more efficient method of testing would allow for constant monitoring of plasma conditions and process control. Process anomalies should be detected and corrected before the parts being treated are damaged. Real time monitoring would allow for instantaneous corrections. Multiple site monitoring would allow for process mapping within one system or simultaneous monitoring of multiple systems. Optical emission spectroscopy conducted external to the plasma apparatus would allow for this sort of multifunctional analysis without perturbing the glow discharge. In this paper, optical emission spectroscopy for non-intrusive, in situ process control will be explored along with applications of this technique to for process control, failure analysis and endpoint determination in PWB manufacture.

Counterfactual Thinking Deficit in Huntington's Disease.

PubMed

Solca, Federica; Poletti, Barbara; Zago, Stefano; Crespi, Chiara; Sassone, Francesca; Lafronza, Annalisa; Maraschi, Anna Maria; Sassone, Jenny; Silani, Vincenzo; Ciammola, Andrea

2015-01-01

Counterfactual thinking (CFT) refers to the generation of mental simulations of alternatives to past events, actions and outcomes. CFT is a pervasive cognitive feature in every-day life and is closely related to decision-making, planning and problem-solving - all of which are cognitive processes linked to unimpaired frontal lobe functioning. Huntington's Disease (HD) is a neurodegenerative disorder characterised by motor, behavioral and cognitive dysfunctions. Because an impairment in frontal and executive functions has been described in HD, we hypothesised that HD patients may have a CFT impairment. Tests of spontaneous counterfactual thoughts and counterfactual-derived inferences were administered to 24 symptomatic HD patients and 24 age- and sex-matched healthy subjects. Our results show a significant impairment in the spontaneous generation of CFT and low performance on the Counterfactual Inference Test (CIT) in HD patients. Low performance on the spontaneous CFT test significantly correlates with impaired attention abilities, verbal fluency and frontal lobe efficiency, as measured by Trail Making Test - Part A, Phonemic Verbal Fluency Test and FAB. Spontaneous CFT and the use of this type of reasoning are impaired in HD patients. This deficit may be related to frontal lobe dysfunction, which is a hallmark of HD. Because CFT has a pervasive role in patients' daily lives regarding their planning, decision making and problem solving skills, cognitive rehabilitation may improve HD patients' ability to analyse current behaviors and future actions.

Adaptation of Instructional Materials: A Commentary on the Research on Adaptations of "Who Polluted the Potomac"

ERIC Educational Resources Information Center

Ercikan, Kadriye; Alper, Naim

2009-01-01

This commentary first summarizes and discusses the analysis of the two translation processes described in the Oliveira, Colak, and Akerson article and the inferences these researchers make based on their research. In the second part of the commentary, we describe procedures and criteria used in adapting tests into different languages and how they…

The Shock and Vibration Bulletin. Part 3. Vibration Testing, Instrumentation and Data Analysis, Loads and Environments.

DTIC Science & Technology

1977-09-01

Ibrahim , Old Dominion University, Norfolk, VA and E.C. Mikulcik, _ 9 The University of Calgary, Calgary, Alberta, Canada LABORATORY IDENTIFICATION OF...existed for a shaker control application. We only had to write a "GP DAP " program to make it a calculator-type program. S S. ". Voice: What are the

Field Programmable Gate Aray (FPGA) Radiation Data: All Data is Not Equal

NASA Technical Reports Server (NTRS)

Label, Kenneth A.; Berg, Melanie D.

2016-01-01

Electronic parts (integrated circuits) have grown in complexity such that determining all failure modes and risks based on single particle event radiation testing is impossible. In this presentation, the authors will present why this is so and provide some realism on what this means to FPGAs. Its all about understanding actual risks and not making assumptions.

40 CFR Appendix III to Part 600 - Sample Fuel Economy Label Calculation

Code of Federal Regulations, 2011 CFR

2011-07-01

... miles per gallon. Note that the car line of the test vehicle using a given engine makes no difference... engine. These four car lines are: Ajax Boredom III Dodo Castor (Station Wagon) A. A car line is defined... different car line than the normal Castor car line made up of sedans, coupes, etc. B. The engine considered...

40 CFR Appendix III to Part 600 - Sample Fuel Economy Label Calculation

Code of Federal Regulations, 2014 CFR

2014-07-01

... miles per gallon. Note that the car line of the test vehicle using a given engine makes no difference... engine. These four car lines are: Ajax Boredom III Dodo Castor (Station Wagon) A. A car line is defined... different car line than the normal Castor car line made up of sedans, coupes, etc. B. The engine considered...

40 CFR Appendix III to Part 600 - Sample Fuel Economy Label Calculation

Code of Federal Regulations, 2013 CFR

2013-07-01

... miles per gallon. Note that the car line of the test vehicle using a given engine makes no difference... engine. These four car lines are: Ajax Boredom III Dodo Castor (Station Wagon) A. A car line is defined... different car line than the normal Castor car line made up of sedans, coupes, etc. B. The engine considered...

40 CFR Appendix III to Part 600 - Sample Fuel Economy Label Calculation

Code of Federal Regulations, 2012 CFR

2012-07-01

... miles per gallon. Note that the car line of the test vehicle using a given engine makes no difference... engine. These four car lines are: Ajax Boredom III Dodo Castor (Station Wagon) A. A car line is defined... different car line than the normal Castor car line made up of sedans, coupes, etc. B. The engine considered...

The U.S. Army’s Health Risk Appraisal (HRA) Survey, Part I, History, Reliability, and Validity

DTIC Science & Technology

2003-08-01

reports as a clinical decision-making rule in deciding whether or not to administer the screening test. Second, accuracy of patient self-reports may...10): 1665-1669, 1997. 6. Baker, F., S. R. Ainsworth, J. T. Dye, C. Crammer , M. J. Thun, D. Hoffmann, J. L. Repace, J. E. Henningfield, J. Slade, J

Transitions: A Classroom Management Concept Related to Effective Teaching. Student Guide. Utah Protocol Materials Project.

ERIC Educational Resources Information Center

Utah State Univ., Logan. Utah Protocol Materials Project.

This student guide is part of a protocol learning module designed to teach the prospective teacher to make smooth transitions from one activity to another, in order to deter disruptive behavior in the course of the transition. The entire module consists of this guide, a protocol film, and testing materials. The student guide contains: (a)…

Small Mammal Jointed Models to Make, Description Cards, and a Menu of Follow-on Activities in Different Intelligence Areas

ERIC Educational Resources Information Center

Rule, Audrey C.; Vander Zanden, Sarah

2012-01-01

Instilling an appreciation of nature in our youth is an important precursor to environmental protection and support for sustainability. Research has shown that involving students in environmental projects improves their motivation, skills, and achievement on standardized tests, This document contains images of the body parts of small mammals with…

Traces: making sense of urodynamics testing--Part 8: Evaluating sensations of bladder filling.

PubMed

Gray, Mikel

2011-01-01

The "Traces" series discusses how the urodynamic clinician generates usable data from a filling cystometrogram (CMG). Part 8 focuses on the question, "What are the sensations of bladder filling?" Recent research suggests that sensations of bladder filling wax and wane from consciousness in healthy persons free of bothersome lower urinary tract symptoms. Because of its invasive and atypical nature when compared to daily life, multichannel urodynamics testing cannot reproduce the numerous and complex variables that influence bladder sensation in the healthy individual, making the evaluation of sensations of bladder filling a particularly challenging component of the filling CMG. Routine assessment of bladder sensations focuses on identification of three landmarks--first sensation of bladder filling, first desire to void, and a strong desire to void. A fourth sensation, bladder fullness or a compelling desire to void, is recommended. In addition to assessing these sensations, the urodynamic clinician must assess sensations indicating associated disease or disorders affecting lower urinary tract function, including urgency, pain, and atypical sensations. This assessment should be completed in the context of the results of one or more validated instruments used to measure bladder sensations.

Goals of Care or Goals of Trust? How Family Members Perceive Goals for Dying Nursing Home Residents.

PubMed

Rosemond, Cherie; Hanson, Laura C; Zimmerman, Sheryl

2017-04-01

Dementia affects more than 5 million Americans, and is a leading cause of death. Family members of nursing home (NH) residents with advanced dementia report difficulty making decisions about care toward the end of life. As part of a randomized trial testing an intervention to improve decision making, this qualitative study aimed to understand how family decision makers experienced goal-based decision making in advance of the death of their relative. This qualitative study was conducted as part of the goals of care clinical trial. Study participants (n = 16) were family decision makers in North Carolina whose relative with advanced dementia died after participating in the goals of care intervention. Semi-structured interviews were analyzed using a qualitative description approach. Family members' experience of decision making and death differed based on the presence or absence of trusting relationships with NH staff. Family members who reported trust described a positive end-of-life experience and less need for prescribed goals of care discussions. In the absence of trust, family members reported that goals of care discussions were ignored by staff or created confusion. Among family members of persons who recently died from dementia in NHs, expressions of trust in staff were strongly related to perceptions of decision making about goals of care. Although goals of care discussions may potentially promote communication to earn trust, the presence of pre-existing trust ultimately influenced the decision making and end-of-life experiences of residents and families.

Theory of mind deficits partly mediate impaired social decision-making in schizophrenia.

PubMed

Yang, Liuqing; Li, Peifu; Mao, Haiying; Wang, Huiling; Shu, Chang; Bliksted, Vibeke; Zhou, Yuan

2017-05-05

Using paradigms from game theory, researchers have reported abnormal decision-making in social context in patients with schizophrenia. However, less is known about the underpinnings of the impairment. This study aimed to test whether theory of mind (ToM) deficits and/or neurocognitive dysfunctions mediate impaired social decision-making in patients with schizophrenia. We compared thirty-five patients with schizophrenia to thirty-eight matched healthy controls with regard to social decision-making using the mini Ultimatum Game (mini UG), a paradigm from game theory. Additionally, we assessed ToM using the Theory of Mind Picture Stories Task, a mental state attribution task, and assessed neurocognition using the Brief Assessment of Cognition in Schizophrenia. Mediation analyses were performed on the data. In contrast to the behavioral pattern of healthy controls in the mini UG, the patients with schizophrenia significantly accepted more disadvantageous offers and rejected more advantageous offers, and showed reduced sensitivity to the fairness-related context changes in the mini UG. Impaired ToM and neurocognition were also found in the patients. Mediation analyses indicated that ToM but not neurocognition partially mediated the group differences on the disadvantageous and advantageous offers in the mini UG. Patients with schizophrenia exhibited impaired social decision-making. This impairment can be partly explained by their ToM deficits rather than neurocognitive deficits. However, the exact nature of the ToM deficits that mediate impaired social decision-making needs to be identified in future.

Computed Tomography and Thermography Increases CMC Material and Process Development Efficiency and Testing Effectiveness

NASA Technical Reports Server (NTRS)

Effinger, Michael; Beshears, Ron; Hufnagle, David; Walker, James; Russell, Sam; Stowell, Bob; Myers, David

2002-01-01

Nondestructive characterization techniques have been used to steer development and testing of CMCs. Computed tomography is used to determine the volumetric integrity of the CMC plates and components. Thermography is used to determine the near surface integrity of the CMC plates and components. For process and material development, information such as density uniformity, part delamination, and dimensional tolerance conformity is generated. The information from the thermography and computed tomography is correlated and then specimen cutting maps are superimposed on the thermography images. This enables for tighter data and potential explanation of off nominal test data. Examples of nondestructive characterization utilization to make decisions in process and material development and testing are presented.

On the Use of 3dB Qualification Margin for Structural Parts on Expendable Launch Vehicles

NASA Technical Reports Server (NTRS)

Yunis, Isam

2007-01-01

The standard random vibration qualification test used for Expendable Launch Vehicle components is Maximum Predicted Environment (MPE) + 6dB for a duration of 4 times the service life of the part. This can be a severe qualification test for these fatigue-sensitive structures. This paper uses flight data from several launch vehicles to establish that reducing the qualification approach to MPE+3dB for the duration of the peak environment (1x life) is valid for fatigue-sensitive structural components. Items that can be classified as fatigue-sensitive are probes, ducts, tubing, bellows, hoses, and any non-functional structure. Non-functional structure may be flight critical or carry fluid, but it cannot include any moving parts or electronics. This reduced qualification approach does not include primary or secondary structure which would be exclusively designed by peak loads, either transient or quasi-static, that are so large and of so few cycles as to make fatigue a moot point.

The Study on the Overall Plasma Electrolytic Oxidation for 6061–7075 Dissimilar Aluminum Alloy Welded Parts Based on the Dielectric Breakdown Theory

PubMed Central

Song, Xiaocun; Zhou, Jixue; Liu, Hongtao; Yang, Yuansheng

2018-01-01

Electrical connection of dissimilar metals will lead to galvanic corrosion. Therefore, overall surface treatment is necessary for the protection of dissimilar metal welded parts. However, serious unbalanced reactions may occur during overall surface treatment, which makes it difficult to prepare integral coating. In this paper, an overall ceramic coating was fabricated by plasma electrolytic oxidation to wrap the 6061–7075 welded part integrally. Moreover, the growth mechanism of the coating on different areas of the welded part was studied based on the dielectric breakdown theory. The reaction sequence of each area during the treatment was verified through specially designed dielectric breakdown tests. The results showed that the high impedance overall of ceramic coating can inhibit the galvanic corrosion of the 6061–7075 welded part effectively. PMID:29301306

Distributed Wind Competitiveness Improvement Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

2016-05-01

The Competitiveness Improvement Project (CIP) is a periodic solicitation through the U.S. Department of Energy and its National Renewable Energy Laboratory. Manufacturers of small and medium wind turbines are awarded cost-shared grants via a competitive process to optimize their designs, develop advanced manufacturing processes, and perform turbine testing. The goals of the CIP are to make wind energy cost competitive with other distributed generation technology and increase the number of wind turbine designs certified to national testing standards. This fact sheet describes the CIP and funding awarded as part of the project.

STS-48 Pilot Reightler on OV-103's aft flight deck poses for ESC photo

NASA Technical Reports Server (NTRS)

1991-01-01

STS-48 Pilot Kenneth S. Reightler, Jr, positioned under overhead window W8, poses for an electronic still camera (ESC) photo on the aft flight deck of the earth-orbiting Discovery, Orbiter Vehicle (OV) 103. Crewmembers were testing the ESC as part of Development Test Objective (DTO) 648, Electronic Still Photography. The digital image was stored on a removable hard disk or small optical disk, and could be converted to a format suitable for downlink transmission. The ESC is making its initial appearance on this Space Shuttle mission.

76 FR 21431 - Medicare Program; Changes to the Medicare Advantage and the Medicare Prescription Drug Benefit...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-15

...This final rule makes revisions to the Medicare Advantage (MA) program (Part C) and Prescription Drug Benefit Program (Part D) to implement provisions specified in the Patient Protection and Affordable Care Act and the Health Care and Education Reconciliation Act of 2010 (collectively referred to as the Affordable Care Act) (ACA) and make other changes to the regulations based on our experience in the administration of the Part C and Part D programs. These latter revisions clarify various program participation requirements; make changes to strengthen beneficiary protections; strengthen our ability to identify strong applicants for Part C and Part D program participation and remove consistently poor performers; and make other clarifications and technical changes.

Metrology of Large Parts. Chapter 5

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2012-01-01

As discussed in the first chapter of this book, there are many different methods to measure a part using optical technology. Chapter 2 discussed the use of machine vision to measure macroscopic features such as length and position, which was extended to the use of interferometry as a linear measurement tool in chapter 3, and laser or other trackers to find the relation of key points on large parts in chapter 4. This chapter looks at measuring large parts to optical tolerances in the sub-micron range using interferometry, ranging, and optical tools discussed in the previous chapters. The purpose of this chapter is not to discuss specific metrology tools (such as interferometers or gauges), but to describe a systems engineering approach to testing large parts. Issues such as material warpage and temperature drifts that may be insignificant when measuring a part to micron levels under a microscope, as will be discussed in later chapters, can prove to be very important when making the same measurement over a larger part. In this chapter, we will define a set of guiding principles for successfully overcoming these challenges and illustrate the application of these principles with real world examples. While these examples are drawn from specific large optical testing applications, they inform the problems associated with testing any large part to optical tolerances. Manufacturing today relies on micrometer level part performance. Fields such as energy and transportation are demanding higher tolerances to provide increased efficiencies and fuel savings. By looking at how the optics industry approaches sub-micrometer metrology, one can gain a better understanding of the metrology challenges for any larger part specified to micrometer tolerances. Testing large parts, whether optical components or precision structures, to optical tolerances is just like testing small parts, only harder. Identical with what one does for small parts, a metrologist tests large parts and optics in particular to quantify their mechanical properties (such as dimensions, mass, etc); their optical prescription or design (i.e. radius of curvature, conic constant, vertex location, size); and their full part shape. And, just as with small parts, a metrologist accomplishes these tests using distance measuring instruments such as tape measures, inside micrometers, coordinate measuring machines, distance measuring interferometers; angle measuring instruments such as theodolites, autocollimators; and surface measuring instruments including interferometers, stylus profilers, interference microscopes, photogrammetric cameras, or other tools. However, while the methodology may be similar, it is more difficult to test a large object for the simple reason that most metrologists do not have the necessary intuition. The skills used to test small parts or optics in a laboratory do not extrapolate to testing large parts in an industrial setting any more than a backyard gardener might successfully operate a farm. But first, what is a large part? A simple definition might be the part's size or diameter. For optics and diffuse surface parts alike, the driving constraint is ability to illuminate the part's surface. For reflective convex mirrors, large is typically anything greater than 1 meter. But, for refractive optics, flats or convex mirrors, large is typically greater than 0.5 meter. While a size definition is simple, it may be less than universal. A more nuanced definition might be that a large part is any component which cannot be easily tested in a standard laboratory environment, on a standard vibration isolated table using standard laboratory infrastructure. A micro-switch or a precision lens might be easily measured to nanometer levels under a microscope in a lab, but a power turbine spline or a larger telescope mirror will not fit under that microscope and may not even fit on the table.

Competence to make treatment decisions in anorexia nervosa: thinking processes and values

PubMed Central

Tan, Dr. Jacinta O. A.; Hope, Professor Tony; Stewart, Dr. Anne; Fitzpatrick, Professor Raymond

2005-01-01

This paper explores the ethical and conceptual implications of the findings from an empirical study of decision-making capacity in anorexia nervosa. In the study, ten female patients aged 13 to 21 years with a diagnosis of anorexia nervosa, and eight sets of parents, took part in semi-structured interviews. The purpose of the interviews was to identify aspects of thinking that might be relevant to the issue of competence to refuse treatment. All the patient participants were also tested using the MacCAT-T test of competence. This is a formalised, structured interviewer-administered test of competence, which is a widely accepted clinical tool for determining capacity. The young women also completed five brief self-administered questionnaires to assess their levels of psychopathology. The issues identified from the interviews are described under two headings: difficulties with thought processing, and changes in values. The results suggest that competence to refuse treatment may be compromised in people with anorexia nervosa in ways that are not captured by traditional legal approaches or current standardised tests of competence. PMID:18066393

Direct surgeon control of the computer in the operating room.

PubMed

Onceanu, Dumitru; Stewart, A James

2011-01-01

This paper describes the design and evaluation of a joystick-like device that allows direct surgeon control of the computer in the operating room. The device contains no electronic parts, is easy to use, is unobtrusive, has no physical connection to the computer, and makes use of an existing surgical tool. The device was tested in comparison to a mouse and to verbal dictation.

Understanding Optimal Decision-Making in Wargaming III

DTIC Science & Technology

2015-10-01

attention - deficit / hyperactivity disorder assessed by the Keio version of the Wisconsin card sorting test. Brain and Development, 34(5), 354-359...immediate feedback regarding friendly, enemy, and total damage. In addition to latency response (LR), attention to feedback also was measured by...measures can detect poor attention allocation. This material is based upon work supported in part by the Army Research Office (62626- NS). The

Testing the Concept of Academic Housework in a European Setting: Part of Academic Career-Making or Gendered Barrier to the Top?

ERIC Educational Resources Information Center

Heijstra, Thamar M.; Einarsdóttir, Þorgerður; Pétursdóttir, Gyða M.; Steinþórsdóttir, Finnborg S.

2017-01-01

In the labour market women's jobs have frequently been conceptually and literally tied to housework and hence thought of as unskilled and therefore undervalued. Although academic institutions have undergone changes, the fact that women still carry the main responsibility for domestic and caring tasks continues to follow them into the academic work…

Construction Equipment

NASA Astrophysics Data System (ADS)

1983-01-01

FMC Corporation conducts extensive proof lift tests and computerized analysis to insure that the cranes can lift rated capacity loads up to one million pounds in a wide range of applications. In their analysis work, engineers makes use of a computer program supplied by COSMIC. Called Analysis of Beam Columns, the program is used as part of the required analysis for determining bending moments, deflections and critical load for latticed crane booms.

Microscale Thermal-Transpiration Gas Pump

NASA Technical Reports Server (NTRS)

Vargo, Stephen; Muntz, Phillip; Shiflett, Geoff

2003-01-01

A recent addition to the growing class of microelectromechanical systems (MEMS) is a single stage of a Knudsen compressor. This device was fabricated and tested to demonstrate the feasibility of Knudsen compressors as miniature vacuum pumps for future portable scientific instruments. The attributes of Knudsen compressors that make them attractive as miniature vacuum pumps are that they contain no moving parts and operate without need for lubricants or working fluids.

The Impact of Communication and Collaboration between Test Developers and Teachers on a High-Stakes ESL Exam: Aligning External Assessment and Classroom Practices

ERIC Educational Resources Information Center

Tan, May; Turner, Carolyn E.

2015-01-01

In Quebec the high-stakes Secondary Five ESL exit writing exam developed by the Education Ministry (MELS) is administered and corrected by classroom teachers. In this distinctive situation, the MELS works toward aligning classroom-based assessment (CBA) and the writing exam by making ongoing teacher involvement part of its development and…

Portable field kit for determining uranium in water

USGS Publications Warehouse

McHugh, John B.

1979-01-01

The pressing need for on-site field analyses of the uranium content of surface and ground waters has promoted the development of a simple, light-weight, relatively cheap, portable kit to make such determinations in the field. Forty to sixty water samples per day can be analyzed for uranium to less than 0.2 parts per billion. The kit was tested in the field with excellent results.

State Test Score Trends through 2007-08, Part 6: Has Progress Been Made in Raising Achievement for English Language Learners?

ERIC Educational Resources Information Center

Chudowsky, Naomi; Chudowsky, Victor

2010-01-01

This report by the Center on Education Policy (CEP), an independent nonprofit organization, examines progress in raising achievement for English language learners. It also describes the factors that make it difficult to accurately assess what ELLs know and can do. The data for this analysis were collected by CEP with technical support from the…

Deployment Repeatability

DTIC Science & Technology

2016-04-01

environment. Modeling is suitable for well- characterized parts, and stochastic modeling techniques can be used for sensitivity analysis and generating a...large cohort of trials to spot unusual cases. However, deployment repeatability is inherently a nonlinear phenomenon, which makes modeling difficult...recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the U.S. Air Force. 1. Test the flight model

12 CFR Appendix H to Part 1022 - Appendix H-Model Forms for Risk-Based Pricing and Credit Score Disclosure Exception Notices

Code of Federal Regulations, 2013 CFR

2013-01-01

... addresses that may change over time. ii. The addition of graphics or icons, such as the person's corporate... change the forms by rearranging the format or by making technical modifications to the language of the... required to conduct consumer testing when rearranging the format of the model forms. a. Acceptable changes...

Can procedural and substantive elements of decision-making be reconciled in assessments of mental capacity?

PubMed Central

Banner, Natalie F.

2016-01-01

Capacity legislation aims to protect individual autonomy and avoid undue paternalism as far as possible, partly through ensuring patients are not deemed to lack capacity because they make an unwise decision. To this end, the law employs a procedural test of capacity that excludes substantive judgments about patients’ decisions. However, clinical intuitions about patients’ capacity to make decisions about their treatment often conflict with a strict reading of the legal criteria for assessing capacity, particularly in psychiatry. In this article I argue that this tension arises because the procedural conception of capacity is inadequate and does not reflect the clinical or legal realities of assessing capacity. I propose that conceptualising capacity as having ‘recognisable reasons’ for a treatment decision provides a practical way of legitimately incorporating both procedural and substantive elements of decision-making into assessments of capacity. PMID:27891169

Effect size for the main cognitive function determinants in a large cross-sectional study.

PubMed

Mura, T; Amieva, H; Goldberg, M; Dartigues, J-F; Ankri, J; Zins, M; Berr, C

2016-11-01

The aim of our study was to examine the effect sizes of different cognitive function determinants in middle and early old age. Cognitive functions were assessed in 11 711 volunteers (45 to 75 years old), included in the French CONSTANCES cohort between January 2012 and May 2014, using the free and cued selective reminding test (FCSRT), verbal fluency tasks, digit-symbol substitution test (DSST) and trail making test (TMT), parts A and B. The effect sizes of socio-demographic (age, sex, education), lifestyle (alcohol, tobacco, physical activity), cardiovascular (diabetes, blood pressure) and psychological (depressive symptomatology) variables were computed as omega-squared coefficients (ω 2 ; part of the variation of a neuropsychological score that is independently explained by a given variable). These sets of variables explained from R 2 = 10% (semantic fluency) to R 2 = 26% (DSST) of the total variance. In all tests, socio-demographic variables accounted for the greatest part of the explained variance. Age explained from ω 2 = 0.5% (semantic fluency) to ω 2 = 7.5% (DSST) of the total score variance, gender from ω 2 = 5.2% (FCSRT) to a negligible part (semantic fluency or TMT) and education from ω 2 = 7.2% (DSST) to ω 2 = 1.4% (TMT-A). Behavioral, cardiovascular and psychological variables only slightly influenced the cognitive test results (all ω 2 < 0.8%, most ω 2 < 0.1%). Socio-demographic variables (age, gender and education) are the main variables associated with cognitive performance variations between 45 and 75 years of age in the general population. © 2016 EAN.

STI: An objective measure for the performance of voice communication systems

NASA Astrophysics Data System (ADS)

Houtgast, T.; Steeneken, H. J. M.

1981-06-01

A measuring device was developed for determining the quality of speech communication systems. It comprises two parts, a signal source which replaces the talker, producing an artificial speech-like signal, and an analysis part which replaces the listener, by which the signal at the receiving end of the system under test is evaluated. Each single measurement results in an index (ranging from 0-100%) which indicates the effect of that communication system on speech intelligibility. The index is called STI (Speech Transmission Index). A careful design of the characteristics of the test signal and of the type of signal analysis makes the present approach widely applicable. It was verified experimentally that a given STI implies a given effect on speech intelligibility, irrespective of the nature of the actual disturbance (noise interference, band-pass limiting, peak clipping, etc.).

Weather Information Communication (WINCOMM) VDL-3 and 1090ES Final Test Requirements, Test Plans, and Test Results

NASA Technical Reports Server (NTRS)

Griner, James H.; Jirberg, Russ; Frantz, Brian; Kachmar, Brian A.

2006-01-01

NASA s Aviation Safety Program was created for the purpose of making a significant reduction in the incidents of weather related aviation accidents by improving situational awareness. The objectives of that program are being met in part through advances in weather sensor technology, and in part through advances in the communications technology that are developed for use in the National Airspace System. It is this latter element, i.e., the improvements in aviation communication technologies, that is the focus of the Weather Information Communications project. This report describes the final flight test results completed under the WINCOMM project at the NASA Glenn Research Center of the 1090 Extended Squitter (1090ES) and VDL Mode 3 (VDL-3) data links as a medium for weather data exchange. It presents the use of 1090ES to meet the program objectives of sending broadcast turbulence information and the use of VDL-3 to send graphical weather images. This report provides the test requirements and test plans, which led to flight tests, as well as final results from flight testing. The reports define the changes made to both avionics and ground-based receivers as well as the ground infrastructure to support implementation of the recommended architecture, with a focus on the issues associated with these changes.

Does the Medicare Part D Decision-Making Experience Differ by Rural/Urban Location?

PubMed

Henning-Smith, Carrie; Casey, Michelle; Moscovice, Ira

2017-01-01

Although much has been written about Medicare Part D enrollment, much less is known about beneficiaries' personal experiences with choosing a Part D plan, especially among rural residents. This study sought to address this gap by examining geographic differences in Part D enrollees' perceptions of the plan decision-making process, including their confidence in their choice, their knowledge about the program, and their satisfaction with available information. We used data from the 2012 Medicare Current Beneficiary Survey and included adults ages 65 and older who were enrolled in Part D at the time of the survey (n = 3,706). We used ordered logistic regression to model 4 outcomes based on beneficiaries' perceptions of the Part D decision-making and enrollment process, first accounting only for differences by rurality, then adjusting for sociodemographic, health, and coverage characteristics. Overall, half of all beneficiaries were not very confident in their Part D knowledge. Rural beneficiaries had lower odds of being confident in the plan they chose and in being satisfied with the amount of information available to them during the decision-making process. After adjusting for all covariates, micropolitan residents continued to have lower odds of being confident in the plan that they chose. Policy-makers should pay particular attention to making information about Part D easily accessible for all beneficiaries and to addressing unique barriers that rural residents have in accessing information while making decisions, such as reduced Internet availability. Furthermore, confidence in the decision-making process may be improved by simplifying the Part D program. © 2016 National Rural Health Association.

A prototype coarse pointing mechanism for laser communication

NASA Astrophysics Data System (ADS)

Miller, Eric D.; DeSpenza, Michael; Gavrilyuk, Ilya; Nelson, Graham; Erickson, Brent; Edwards, Britney; Davis, Ethan; Truscott, Tony

2017-02-01

Laser communication systems promise orders-of-magnitude improvement in data throughput per unit SWaP (size, weight and power) compared to conventional RF systems. However, in order for lasercom to make sense economically as part of a worldwide connectivity solution, the cost per terminal still needs to be significantly reduced. In this paper, we describe a coarse pointing mechanism that has been designed with an emphasis on simplicity, making use of conventional materials and commercial off-the-shelf components wherever possible. An overview of the design architecture and trades is presented, along with various results and practical lessons learned during prototype integration and test.

RAPIDR: an analysis package for non-invasive prenatal testing of aneuploidy

PubMed Central

Lo, Kitty K.; Boustred, Christopher; Chitty, Lyn S.; Plagnol, Vincent

2014-01-01

Non-invasive prenatal testing (NIPT) of fetal aneuploidy using cell-free fetal DNA is becoming part of routine clinical practice. RAPIDR (Reliable Accurate Prenatal non-Invasive Diagnosis R package) is an easy-to-use open-source R package that implements several published NIPT analysis methods. The input to RAPIDR is a set of sequence alignment files in the BAM format, and the outputs are calls for aneuploidy, including trisomies 13, 18, 21 and monosomy X as well as fetal sex. RAPIDR has been extensively tested with a large sample set as part of the RAPID project in the UK. The package contains quality control steps to make it robust for use in the clinical setting. Availability and implementation: RAPIDR is implemented in R and can be freely downloaded via CRAN from here: http://cran.r-project.org/web/packages/RAPIDR/index.html. Contact: kitty.lo@ucl.ac.uk Supplementary information: Supplementary data are available at Bioinformatics online. PMID:24990604

NEET-AMM Final Technical Report on Laser Direct Manufacturing (LDM) for Nuclear Power Components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Scott; Baca, Georgina; O'Connor, Michael

2015-12-31

Final technical report summarizes the program progress and technical accomplishments of the Laser Direct Manufacturing (LDM) for Nuclear Power Components project. A series of experiments varying build process parameters (scan speed and laser power) were conducted at the outset to establish the optimal build conditions for each of the alloys. Fabrication was completed in collaboration with Quad City Manufacturing Laboratory (QCML). The density of all sample specimens was measured and compared to literature values. Optimal build process conditions giving fabricated part densities close to literature values were chosen for making mechanical test coupons. Test coupons whose principal axis is onmore » the x-y plane (perpendicular to build direction) and on the z plane (parallel to build direction) were built and tested as part of the experimental build matrix to understand the impact of the anisotropic nature of the process.. Investigations are described 316L SS, Inconel 600, 718 and 800 and oxide dispersion strengthed 316L SS (Yttria) alloys.« less

Counterfactual Thinking Deficit in Huntington’s Disease

PubMed Central

Solca, Federica; Poletti, Barbara; Zago, Stefano; Crespi, Chiara; Sassone, Francesca; Lafronza, Annalisa; Maraschi, Anna Maria; Sassone, Jenny; Silani, Vincenzo; Ciammola, Andrea

2015-01-01

Background and Objective Counterfactual thinking (CFT) refers to the generation of mental simulations of alternatives to past events, actions and outcomes. CFT is a pervasive cognitive feature in every-day life and is closely related to decision-making, planning and problem-solving – all of which are cognitive processes linked to unimpaired frontal lobe functioning. Huntington’s Disease (HD) is a neurodegenerative disorder characterised by motor, behavioral and cognitive dysfunctions. Because an impairment in frontal and executive functions has been described in HD, we hypothesised that HD patients may have a CFT impairment. Methods Tests of spontaneous counterfactual thoughts and counterfactual-derived inferences were administered to 24 symptomatic HD patients and 24 age- and sex-matched healthy subjects. Results Our results show a significant impairment in the spontaneous generation of CFT and low performance on the Counterfactual Inference Test (CIT) in HD patients. Low performance on the spontaneous CFT test significantly correlates with impaired attention abilities, verbal fluency and frontal lobe efficiency, as measured by Trail Making Test – Part A, Phonemic Verbal Fluency Test and FAB. Conclusions Spontaneous CFT and the use of this type of reasoning are impaired in HD patients. This deficit may be related to frontal lobe dysfunction, which is a hallmark of HD. Because CFT has a pervasive role in patients’ daily lives regarding their planning, decision making and problem solving skills, cognitive rehabilitation may improve HD patients’ ability to analyse current behaviors and future actions. PMID:26070155

Teaching About CO2 as a Climate Regulator During the Phanerozoic and Today

NASA Astrophysics Data System (ADS)

St John, K. K.; Krissek, L. A.; Jones, M. H.; Leckie, R. M.; Pound, K. S.

2010-12-01

As part of the NSF-funded CCLI Type 1 project “Building Core Knowledge - Reconstructing Earth History”, this new four-part student-active learning exercise explores how the exchange of carbon into and out of the atmosphere is a primary factor in regulating climate over timescales of years to millions of years. In Part 1, students make initial observations about the short term global carbon cycle, its reservoirs, and the rates of carbon transfer from one reservoir to another. In Part 2, students investigate how CO2 directly and indirectly affects temperature. This understanding is developed though quantitative analysis of the changes in radiative forcing of CO2 and other factors (e.g., land surface albedo) between 1750 and 2005 based on IPCC climate models, and by constructing qualitative logic scenarios of positive and negative feedbacks in Earth’s climate system. In Part 3, students examine instrumental and ice core records of atmospheric CO2 levels, and identify which parts of the carbon cycle are most important at regulating climate over historical time periods. In Part 4, students, investigate the long-term global carbon cycle, CO2, and Phanerozoic climate history. Using proxy data and general circulation model results they identify Greenhouse and Icehouse times, and place modern climate change in a geologic context. The exercise set is designed for use in introductory undergraduate geoscience classes, either as a series of separate 30 to 60-minute in-class activities, as a single concentrated lab activity, or as homework assignments. In addition to developing content knowledge about CO2 as a climate regulator during the Phanerozoic and today, students also develop and practice their skills in making observations, interpreting data from graphs and tables, performing calculations, differentiating and making connections between processes and results, identifying scientific uncertainties, and communicating scientific results. This exercise set is currently being classroom tested, and is part of a larger undergraduate curriculum called “Building Core Knowledge - Reconstructing Earth History”, which uses authentic data to teach anchor concepts of climate change through sediment core archives (NSF Grant # 0737335).

44 CFR Appendix A to Part 9 - Decision-making Process for E.O. 11988

Code of Federal Regulations, 2010 CFR

2010-10-01

... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Decision-making Process for E.O. 11988 A Appendix A to Part 9 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT..., App. A Appendix A to Part 9—Decision-making Process for E.O. 11988 EC02FE91.074 ...

14 CFR 382.45 - Must carriers make copies of this Part available to passengers?

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Must carriers make copies of this Part available to passengers? 382.45 Section 382.45 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF... TRAVEL Information for Passengers § 382.45 Must carriers make copies of this Part available to passengers...

14 CFR 382.45 - Must carriers make copies of this Part available to passengers?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Must carriers make copies of this Part available to passengers? 382.45 Section 382.45 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF... TRAVEL Information for Passengers § 382.45 Must carriers make copies of this Part available to passengers...

14 CFR 382.45 - Must carriers make copies of this Part available to passengers?

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Must carriers make copies of this Part available to passengers? 382.45 Section 382.45 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF... TRAVEL Information for Passengers § 382.45 Must carriers make copies of this Part available to passengers...

14 CFR 382.45 - Must carriers make copies of this Part available to passengers?

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Must carriers make copies of this Part available to passengers? 382.45 Section 382.45 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF... TRAVEL Information for Passengers § 382.45 Must carriers make copies of this Part available to passengers...

14 CFR 382.45 - Must carriers make copies of this Part available to passengers?

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Must carriers make copies of this Part available to passengers? 382.45 Section 382.45 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF... TRAVEL Information for Passengers § 382.45 Must carriers make copies of this Part available to passengers...

Adaptation of instructional materials: a commentary on the research on adaptations of Who Polluted the Potomac

NASA Astrophysics Data System (ADS)

Ercikan, Kadriye; Alper, Naim

2009-03-01

This commentary first summarizes and discusses the analysis of the two translation processes described in the Oliveira, Colak, and Akerson article and the inferences these researchers make based on their research. In the second part of the commentary, we describe procedures and criteria used in adapting tests into different languages and how they may apply to adaptation of instructional materials. The authors provide a good theoretical analysis of what took place in two translation instances and make an important contribution by taking the first step in providing a systematic discussion of adaptation of instructional materials. Our discussion proposes procedures for adapting instructional materials for examining equivalence of source and target versions of adapted instructional materials. We highlight that many of the procedures and criteria used in examining comparability of educational tests is missing in this emerging research of area.

Recent flight-test results of optical airdata techniques

NASA Technical Reports Server (NTRS)

Bogue, Rodney K.

1993-01-01

Optical techniques for measuring airdata parameters were demonstrated with promising results on high performance fighter aircraft. These systems can measure the airspeed vector, and some are not as dependent on special in-flight calibration processes as current systems. Optical concepts for measuring freestream static temperature and density are feasible for in-flight applications. The best feature of these concepts is that the air data measurements are obtained nonintrusively, and for the most part well into the freestream region of the flow field about the aircraft. Current requirements for measuring air data at high angle of attack, and future need to measure the same information at hypersonic flight conditions place strains on existing techniques. Optical technology advances show outstanding potential for application in future programs and promise to make common use of optical concepts a reality. Results from several flight-test programs are summarized, and the technology advances required to make optical airdata techniques practical are identified.

How does dementia with Lewy bodies start? prodromal cognitive changes in REM sleep behavior disorder.

PubMed

Génier Marchand, Daphné; Postuma, Ronald B; Escudier, Frédérique; De Roy, Jessie; Pelletier, Amélie; Montplaisir, Jacques; Gagnon, Jean-François

2018-04-17

We describe the progression of cognitive decline and identify the predictive values of cognitive tests in three groups of REM sleep behavior disorder (RBD) patients classified at their last follow-up as having Parkinson's disease (PD), dementia with Lewy bodies (DLB), or still-idiopathic. Patients (n = 109) underwent polysomnographic, neurological, and neuropsychological assessments. We used linear mixed-model analyses to compare the progression of cognitive test performance between the three groups over a 3-year prodromal period, and performed linear regressions for a 6-year prodromal period. We compared the proportions of patients with clinically impaired performance (z scores < -1.5). DLB patients were pair-matched according to age, sex, and education to healthy controls (2:1 ratio), and receiver operating characteristic curves were performed to identify the psychometric properties of cognitive tests to predict dementia. At follow-up, 38 patients (35%) developed a neurodegenerative disorder: 20 had PD and 18 DLB. Cognitive performance changes over time were strongly associated with later development of dementia. Clear deficits in attention and executive functions were observed 6 years before diagnosis. Verbal episodic learning and memory deficits started later, deviating from normal approximately 5 to 6 years and becoming clinically impaired at 1 to 2 years before diagnosis. Visuospatial abilities progressed variably, with inconsistent prodromal latencies. The Trail Making Test (part B), Verbal Fluency (semantic), and Rey Auditory-Verbal Learning Test (total, immediate, and delayed recalls) were the best predictors for dementia (area under the curve = 0.90-0.97). Prodromal DLB is detectible up to 6 years before onset. For clinical utility, the Trail Making Test (part B) best detects early prodromal dementia stages, whereas Verbal Fluency (semantic) and verbal episodic learning tests are best for monitoring changes over time. Ann Neurol 2018. © 2018 American Neurological Association.

A perception and manipulation system for collecting rock samples

NASA Technical Reports Server (NTRS)

Choi, T.; Delingette, H.; Deluise, M.; Hsin, Y.; Hebert, M.; Ikeuchi, Katsushi

1991-01-01

An important part of a planetary exploration mission is to collect and analyze surface samples. As part of the Carnegie Mellon University Ambler Project, researchers are investigating techniques for collecting samples using a robot arm and a range sensor. The aim of this work is to make the sample collection operation fully autonomous. Described here are the components of the experimental system, including a perception module that extracts objects of interest from range images and produces models of their shapes, and a manipulation module that enables the system to pick up the objects identified by the perception module. The system was tested on a small testbed using natural terrain.

Integrated intelligent systems in advanced reactor control rooms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beckmeyer, R.R.

1989-01-01

An intelligent, reactor control room, information system is designed to be an integral part of an advanced control room and will assist the reactor operator's decision making process by continuously monitoring the current plant state and providing recommended operator actions to improve that state. This intelligent system is an integral part of, as well as an extension to, the plant protection and control systems. This paper describes the interaction of several functional components (intelligent information data display, technical specifications monitoring, and dynamic procedures) of the overall system and the artificial intelligence laboratory environment assembled for testing the prototype. 10 refs.,more » 5 figs.« less

How to perform a critically appraised topic: part 2, appraise, evaluate, generate, and recommend.

PubMed

Kelly, Aine Marie; Cronin, Paul

2011-11-01

This article continues the discussion of a critically appraised topic started in Part 1. A critically appraised topic is a practical tool for learning and applying critical appraisal skills. This article outlines steps 4-7 involved in performing a critically appraised topic for studies of diagnostic tests: Appraise, Appraise the literature; Evaluate, evaluate the strength of the evidence from the literature; Generate, generate graphs of conditional probability; and Recommend, draw conclusions and make recommendations. For steps 4-7 of performing a critically appraised topic, the main study results are summarized and translated into clinically useful measures of accuracy, efficacy, or risk.

Fully Integral, Flexible Composite Driveshaft

NASA Technical Reports Server (NTRS)

Lawrie, Duncan

2014-01-01

An all-composite driveshaft incorporating integral flexible diaphragms was developed for prime contractor testing. This new approach makes obsolete the split lines required to attach metallic flex elements and either metallic or composite spacing tubes in current solutions. Subcritical driveshaft weights can be achieved that are half that of incumbent technology for typical rotary wing shaft lengths. Spacing tubes compose an integral part of the initial tooling but remain part of the finished shaft and control natural frequencies and torsional stability. A concurrently engineered manufacturing process and design for performance competes with incumbent solutions at significantly lower weight and with the probability of improved damage tolerance and fatigue life.

KSC-08pd1957

NASA Image and Video Library

2008-07-11

CAPE CANAVERAL, Fla. – In the Orbiter Processing Facility at NASA's Kennedy Space Center, STS-125 Mission Specialist Michael Good checks out part of the equipment in space shuttle Atlantis' payload bay. Equipment familiarization is part of the crew equipment interface test, which provides hands-on experience with hardware and equipment for the mission. Atlantis is targeted to launch Oct. 8 on the STS-125 mission to service the Hubble Space Telescope. The mission crew will perform history-making, on-orbit “surgery” on two important science instruments aboard the telescope. After capturing the telescope, two teams of spacewalking astronauts will perform the repairs during five planned spacewalks. Photo credit: NASA/Kim Shiflett

Soviet Youth Indoctrination

DTIC Science & Technology

1975-07-01

teacher "helps" students make the right decisions. Peer criticism and the encouragement of Informing on others is an important part of Soviet social ...are legal and officially recognized. The courts may even condemn 1 acts as being " socially undesirable." The court situation uses peer participation... social behavior in the test where the peers would be allowed to view the results. In the con- Adition where the adults would see the results, the

Novel technique used to treat melanoma and epithelial tumors in new clinical trial | Center for Cancer Research

Cancer.gov

Exomic sequencing allows researchers to read the “letters” in the part of your DNA that makes proteins to see where the letters are correct and where the letters are incorrect. This information allows white blood cells engineered from the patient to recognize these tumor-specific mutations and be made into vaccines, called dendritic cell (DC) vaccines, to test effects on

Career Advancement and Work Support Services on the Job: Implementing the Fort Worth Work Advancement and Support Center Program. Executive Summary

ERIC Educational Resources Information Center

Schultz, Caroline; Seith, David

2011-01-01

The Work Advancement and Support Center (WASC) program in Fort Worth was part of a demonstration that is testing innovative strategies to help increase the income of low-wage workers, who make up a large segment of the U.S. workforce. The program offered services to help workers stabilize their employment, improve their skills, and increase their…

Career Advancement and Work Support Services on the Job: Implementing the Fort Worth Work Advancement and Support Center Program

ERIC Educational Resources Information Center

Schultz, Caroline; Seith, David

2011-01-01

The Work Advancement and Support Center (WASC) program in Fort Worth was part of a demonstration that is testing innovative strategies to help increase the income of low-wage workers, who make up a large segment of the U.S. workforce. The program offered services to help workers stabilize their employment, improve their skills, and increase their…

Does depression matter in neuropsychological performances in anorexia nervosa? A descriptive review.

PubMed

Abbate-Daga, Giovanni; Buzzichelli, Sara; Marzola, Enrica; Aloi, Matteo; Amianto, Federico; Fassino, Secondo

2015-09-01

This review aims to examine the impact of depressive symptoms on the assessment of cognitive flexibility, central coherence, and decision-making in individuals with anorexia nervosa (AN). An online search was carried out using PubMed and PsycInfo. Articles were selected for review if they were published in English between 1990 and 2014 and used the Wisconsin Card Sorting Test, the Trail Making Task parts A and B, the Brixton Test, the Rey-Osterrieth Complex Figure Test, and/or the Iowa Gambling Task. Sixty-two studies were included. Thirty (48%) of the studies statistically assessed the association between depression and neurocognition in AN versus healthy controls. Where significant correlations were found, it became clear that the more serious the depression, the greater the neuropsychological impairment. Only six (10%) studies examined whether increased depressive symptoms were able to eliminate the differences between individuals with AN and healthy controls, and one study found that depressive symptoms did eliminate group differences in cognitive flexibility and decision-making. Only a subgroup of articles on neuropsychology in AN adjusted for depression. However, given the role of depression that some articles suggest, future studies should pay closer attention to the evaluation of this potential confounder. © 2015 Wiley Periodicals, Inc.

Science teachers' mission impossible?: a qualitative study of obstacles in assessing students' practical abilities

NASA Astrophysics Data System (ADS)

Sund, Per

2016-09-01

Science teachers regard practical work as important and many claim that it helps students to learn science. Besides theoretical knowledge, such as concepts and formulas, practical work is considered to be an integral and basic part of science education. As practical work is perceived and understood in different ways, comparing the results between classes and schools is difficult. One way of making the results comparable is to develop systematic inquiries to be assessed in national large-scale tests. However, introducing similar testing conditions in a laboratory environment is not always possible. Although the instructions and assessment guides for such tests are detailed, many obstacles need to be overcome if equality in the overall test situation is to be achieved. This empirical case study investigates two secondary school science teachers' assessments of 15-16 years old students in three separate groups in the practical part of a Swedish national test in chemistry. Data are gathered using two video cameras and three pairs of spy camera glasses. The results show that individual and independent assessments are difficult due to the social interactions that take place and the physical sources of errors that occur in this type of setting.

Using willingness-to-pay to establish patient preferences for cancer testing in primary care.

PubMed

Hollinghurst, Sandra; Banks, Jonathan; Bigwood, Lin; Walter, Fiona M; Hamilton, Willie; Peters, Tim J

2016-08-09

Shared decision making is a stated aim of several healthcare systems. In the area of cancer, patients' views have informed policy on screening and treatment but there is little information about their views on diagnostic testing in relation to symptom severity. We used the technique of willingness-to-pay to determine public preferences around diagnostic testing for colorectal, lung, and pancreatic cancer in primary care in the UK. Participants were approached in general practice waiting rooms and asked to complete a two-stage electronic survey that described symptoms of cancer, the likelihood that the symptoms indicate cancer, and information about the appropriate diagnostic test. Part 1 asked for a binary response (yes/no) as to whether they would choose to have a test if it were offered. Part 2 elicited willingness-to-pay values of the tests using a payment scale followed by a bidding exercise, with the aim that these values would provide a strength of preference not detectable using the binary approach. A large majority of participants chose to be tested for all cancers, with only colonoscopy (colorectal cancer) demonstrating a risk gradient. In the willingness-to-pay exercise participants placed a lower value on an X-ray (lung cancer) than the tests for colorectal or pancreatic cancer and X-ray was the only test where risk was clearly related to the willingness-to-pay value. Willingness-to-pay values did not enhance the binary responses in the way intended; participants appeared to be motivated differently when responding to the two parts of the questionnaire. More work is needed to understand how participants perceive risk in this context and how they respond to questions about willingness-to-pay. Qualitative methods could provide useful insights.

Effects of prevalence on visual search and decision making in fracture detection

NASA Astrophysics Data System (ADS)

Ethell, Susan C.; Manning, David

2001-06-01

Research concerning disease prevalence has inferred that indices of observer performance become, in part, a function of predetermined prevalence. The cause of this modified performance and decision-making is not fully understood, although the alteration of the criterion level of the observer may be a feature. Novice radiography students were randomly assigned to one of three digitised test banks of 72 wrist images. Test bank A, B and C represented a fracture prevalence of 50%, 83% and 22% respectively. Half of the observers from each group were made aware of the prevalence of their respective test bank. Observers recorded their decisions on an operator rating scale. Results showed significant differences in overall Az between the 50% and 83% prevalence sets (p equals 0.04) and the 50% and 22% prevalence sets (p equals 0.005). Knowledge of the prevalence influenced both sensitivity and specificity values at the 83% prevalence level (p equals 0.03 and 0.02) but not at the lower levels. For test bank A sensitivity was 87%; specificity 53%; Az 0.80, test bank B sensitivity 81%; specificity 48%; Az 0.71 and test bank C sensitivity 85%; specificity 43%; Az 0.68. Analysis of the eye movement patterns of observers under conditions of varying prevalence is in progress.

Aspects of fracture mechanics in cryogenic model design. Part 2: NTF materials

NASA Technical Reports Server (NTRS)

Newman, J. C., Jr.; Lisagor, W. B.

1983-01-01

Results of fatigue crack growth and fracture toughness tests conducted on three candidate materials are presented. Fatigue crack growth and fracture toughness tests were conducted on NITRONIC 40 at room temperature and -275 F. Fracture toughness tests were also conducted on Vascomax 200 and 250 maraging steel from room temperature to -320 F. NITRONIC 40 was used to make the Pathfinder 1 model. The fatigue crack growth rate tests were conducted at room temperature and -275 F on three-point notch bend specimens. The fracture toughness tests on the as received and stress relieved materials at -275 F were conducted on the center crack tension specimens. Toughness tests were also conducted on Vascomax CVM-200 and CVM-250 maraging steel from room temperature to -320 F using round and rectangular compact specimens.

Correlation Tests of the Ditching Behavior of an Army B-24D Airplane and a 1/16-size Model

NASA Technical Reports Server (NTRS)

Jarvis, George A.; Fisher, Lloyd J.

1946-01-01

Behaviors of both model and full-scale airplanes were ascertained by making visual observations, by recording time histories of decelerations, and by taking motion picture records of ditchings. Results are presented in form of sequence photographs and time-history curves for attitudes, vertical and horizontal displacements, and longitudinal decelerations. Time-history curves for attitudes and horizontal and vertical displacements for model and full-scale tests were in agreement; maximum longitudinal decelerations for both ditchings did not occur at same part of run; full-scale maximum deceleration was 50 percent greater.

STS-48 MS Buchli, eating crackers on OV-103's middeck, is captured by ESC

NASA Technical Reports Server (NTRS)

1991-01-01

STS-48 Mission Specialist (MS) James F. Buchli 'catches' goldfish snack crackers as they float in the weightless environment of the earth-orbiting Discovery, Orbiter Vehicle (OV) 103. Buchli's eating activity on the middeck was documented using the Electronic Still Camera (ESC). Crewmembers were testing the ESC as part of Development Test Objective (DTO) 648, Electronic Still Photography. The digital image was stored on a removable hard disk or small optical disk, and could be converted to a format suitable for downlink transmission. The ESC is making its initial appearance on this Space Shuttle mission.

KSC-04PD-0671

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. -- At Astrotech Space Operations facilities near KSC, workers make adjustments to the Mercury Surface, Space Environment, Geochemistry and Ranging (MESSENGER) spacecraft now resting on the turnover fixture. Workers will perform the propulsion system phasing test firing gas through the thrusters in order to verify that the right thrusters fire when expected as part of prelaunch testing at the site. Launch is scheduled for May 11 from Pad 17-B, Cape Canaveral Air Force Station. The spacecraft will fly past Venus three times and Mercury twice before starting a year-long orbital study of Mercury in July 2009.

Nuisance or Not? Part 2 "Wood" New Additives Make a Difference?

NASA Astrophysics Data System (ADS)

Vilardi, J. R.

2017-12-01

Nuisance or Not? Part 2"Wood" New Additives Make a Difference? Julian Vilardi Wetumpka Middle School, Wetumpka, USA Last year fuel briquettes were created out of nuisance organisms. Several samples had results better or comparable to the controls. This project is a revision/ extension. Purpose: Find process and formula for a long lasting environmentally friendly biofuel that produces high energy with low byproducts and low cost. Hypotheses: If wisteria is processed to make a biofuel that contains 90% wisteria leaves and vines and 10% pine cones, then a high energy, low byproduct, biofuel will be created. Procedure: Collect, dry and chop material, compress mass, burn test, repeat for every organism. Kudzu was combined in a 70 % kudzu: 30 % wood additive with used cooking oil and pressed into logs. Logs were massed, burned and temperature was recorded and compared to controls. Results: Kudzu had the longest flame but produced smoke. Kudzu logs with recycled cooking oil had less smoke and burned for an hour plus. Conclusions: Wisteria did not compact or have great flammability. Pine cones did not flame well either. This hypothesis was unsupported. All kudzu samples when compacted and combined with any additive were the best biofuel. Kudzu logs with the mixture of wood additives burned the longest and was one of the hottest. The gas chromatograph/emissions tests showed the organic byproducts produced on burning the kudzu logs were less than the accepted range for air quality. These supported the hypothesis and met the purpose of this project. A low cost, environmentally friendly, efficient fuel source was created!

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cappiello, M.; Hobbins, R.; Penny, K.

As part of the Department of Energy Advanced Fuel Cycle program, a series of fuels development irradiation tests have been performed in the Advanced Test Reactor (ATR) at the Idaho National Laboratory. These tests are providing excellent data for advanced fuels development. The program is focused on the transmutation of higher actinides which best can be accomplished in a sodium-cooled fast reactor. Because a fast test reactor is no longer available in the US, a special test vehicle is used to achieve near-prototypic fast reactor conditions (neutron spectra and temperature) for use in ATR (a water-cooled thermal reactor). As partmore » of the testing program, there were many successful tests of advanced fuels including metals and ceramics. Recently however, there have been three experimental campaigns using metal fuels that experienced failure during irradiation. At the request of the program, an independent review committee was convened to review the post-test analyses performed by the fuels development team, to assess the conclusions of the team for the cause of the failures, to assess the adequacy and completeness of the analyses, to identify issues that were missed, and to make recommendations for improvements in the design and operation of future tests. Although there is some difference of opinion, the review committee largely agreed with the conclusions of the fuel development team regarding the cause of the failures. For the most part, the analyses that support the conclusions are sufficient.« less

Decision Processes in Discrimination: Fundamental Misrepresentations of Signal Detection Theory

NASA Technical Reports Server (NTRS)

Balakrishnan, J. D.

1998-01-01

In the first part of this article, I describe a new approach to studying decision making in discrimination tasks that does not depend on the technical assumptions of signal detection theory (e.g., normality of the encoding distributions). Applying these new distribution-free tests to data from three experiments, I show that base rate and payoff manipulations had substantial effects on the participants' encoding distributions but no effect on their decision rules, which were uniformly unbiased in equal and unequal base rate conditions and in symmetric and asymmetric payoff conditions. In the second part of the article, I show that this seemingly paradoxical result is readily explained by the sequential sampling models of discrimination. I then propose a new, "model-free" test for response bias that seems to more properly identify both the nature and direction of the biases induced by the classical bias manipulations.

Strategies for making oral presentations about clinical issues: Part I. At the workplace.

PubMed

Brown, Janet M; Schmidt, Nola A

2009-04-01

This column offers strategies that clinicians can use to make effective oral presentations at work. Part II, which will be published next month, will offer strategies for making oral presentations at professional conferences.

Executive Functions in Children Who Experience Bullying Situations

PubMed Central

Medeiros, Wandersonia; Torro-Alves, Nelson; Malloy-Diniz, Leandro F.; Minervino, Carla M.

2016-01-01

Bullying is characterized by intentional, repetitive, and persistent aggressive behavior that causes damage to the victim. Many studies investigate the social and emotional aspects related to bullying, but few assess the cognitive aspects it involves. Studies with aggressive individuals indicate impairment in executive functioning and decision-making. The objective of this study was to assess hot and cold executive functions in children who experience bullying. A total of 60 children between 10 and 11 years of age were included in the study. They were divided into four groups: aggressors (bullies), victims, bully-victims, and control. Tests for decision-making, inhibitory control, working memory, and cognitive flexibility were used. The bully group made more unfavorable choices on the Iowa Gambling Task, which may indicate difficulties in the decision-making process. The victim group took longer to complete the Trail Making Test (Part B) than aggressors, suggesting lower cognitive flexibility in victims. The hypothesis that aggressors would have lower performance in other executive functions such as inhibitory control, working memory, and cognitive flexibility has not been confirmed. This study indicates that bullies have an impairment of hot executive functions whereas victims have a comparatively lower performance in cold executive functions. In addition to social and cultural variables, neurocognitive and emotional factors seem to influence the behavior of children in bullying situations. PMID:27616998

Pre- and post-test genetic counseling for chromosomal and Mendelian disorders.

PubMed

Fonda Allen, Jill; Stoll, Katie; Bernhardt, Barbara A

2016-02-01

Genetic carrier screening, prenatal screening for aneuploidy, and prenatal diagnostic testing have expanded dramatically over the past 2 decades. Driven in part by powerful market forces, new complex testing modalities have become available after limited clinical research. The responsibility for offering these tests lies primarily on the obstetrical care provider and has become more burdensome as the number of testing options expands. Genetic testing in pregnancy is optional, and decisions about undergoing tests, as well as follow-up testing, should be informed and based on individual patients' values and needs. Careful pre- and post-test counseling is central to supporting informed decision-making. This article explores three areas of technical expansion in genetic testing: expanded carrier screening, non-invasive prenatal screening for fetal aneuploidies using cell-free DNA, and diagnostic testing using fetal chromosomal microarray testing, and provides insights aimed at enabling the obstetrical practitioner to better support patients considering these tests. Copyright © 2016 Elsevier Inc. All rights reserved.

[The relationship between executive functions, physical and functional capability in people over 60 years old].

PubMed

Rajtar-Zembaty, Anna; Sałakowski, Andrzej; Rajtar-Zembaty, Jakub

Nowadays it is believed that cognitive decline may contribute to the formation of gait disturbance and increased risk of falls. Currently the importance of executive functions to maintain proper control of gait is emphasized. The aim of the study was to assess the relationship between the level of executive function, functional and physical capability in patients over 60 years of age. The study included 300 patients (199 women and 101 men) aged 60-88 years. In order to screening for cognitive function Mini-Mental State Examination (MMSE) was used. The following researchers tools were used to conduct functional assessment: a) Short Physical Performance Battery (SPPB), b) Timed “Up and Go” (TUG) and c) Fast Walking Test. To assess executive fucntion Trail Making Test (TMT) was selected. The relationship between the speed of information processing (part A, TMT), executive functions (Part B, TMT), level of functional and physical capability was observed. The strongest positive correlation was noted between the time of TUG test and TMT part B (r=0.32; p<0.01), and also between Fast Gait Test and TMT part A (r=0.27; p<0.01). It has been proven that the level of executive function is related to the level of functional capability (β=0.18; p=0.001). It was found that 15% of variation in the level of the TUG test was explained by age, TMT- B, GDS and BMI. There is a relationship between level of executive functions, functional and physical capability in patients over 60 years of age. Cognitive processes play an important role in the control of motor functions therefore it is important to incorporate examination of cognitive functions in the early geriatric diagnosis.

Structural damage detection based on stochastic subspace identification and statistical pattern recognition: II. Experimental validation under varying temperature

NASA Astrophysics Data System (ADS)

Lin, Y. Q.; Ren, W. X.; Fang, S. E.

2011-11-01

Although most vibration-based damage detection methods can acquire satisfactory verification on analytical or numerical structures, most of them may encounter problems when applied to real-world structures under varying environments. The damage detection methods that directly extract damage features from the periodically sampled dynamic time history response measurements are desirable but relevant research and field application verification are still lacking. In this second part of a two-part paper, the robustness and performance of the statistics-based damage index using the forward innovation model by stochastic subspace identification of a vibrating structure proposed in the first part have been investigated against two prestressed reinforced concrete (RC) beams tested in the laboratory and a full-scale RC arch bridge tested in the field under varying environments. Experimental verification is focused on temperature effects. It is demonstrated that the proposed statistics-based damage index is insensitive to temperature variations but sensitive to the structural deterioration or state alteration. This makes it possible to detect the structural damage for the real-scale structures experiencing ambient excitations and varying environmental conditions.

39 CFR 3001.7 - Ex parte communications.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Applicability § 3001.7 Ex parte communications. (a) Definitions—(1) Decision-making Commission personnel... persons are designated “decision-making Commission personnel”: (i) The Commissioners and their personal... involved in the decisional process. (2) Non-decision-making Commission personnel. The following categories...

76 FR 52625 - Empowering Consumers To Prevent and Detect Billing for Unauthorized Charges (“Cramming...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-23

...'' proceeding in accordance with the Commission's ex parte rules. Persons making ex parte presentations must...). Persons making oral ex parte presentations are reminded that memoranda summarizing the presentation must: (1) List all persons attending or otherwise participating in the meeting at which the ex parte...

Validation and structural analysis of the kinematics concept test

NASA Astrophysics Data System (ADS)

Lichtenberger, A.; Wagner, C.; Hofer, S. I.; Stern, E.; Vaterlaus, A.

2017-06-01

The kinematics concept test (KCT) is a multiple-choice test designed to evaluate students' conceptual understanding of kinematics at the high school level. The test comprises 49 multiple-choice items about velocity and acceleration, which are based on seven kinematic concepts and which make use of three different representations. In the first part of this article we describe the development and the validation process of the KCT. We applied the KCT to 338 Swiss high school students who attended traditional teaching in kinematics. We analyzed the response data to provide the psychometric properties of the test. In the second part we present the results of a structural analysis of the test. An exploratory factor analysis of 664 student answers finally uncovered the seven kinematics concepts as factors. However, the analysis revealed a hierarchical structure of concepts. At the higher level, mathematical concepts group together, and then split up into physics concepts at the lower level. Furthermore, students who seem to understand a concept in one representation have difficulties transferring the concept to similar problems in another representation. Both results have implications for teaching kinematics. First, teaching mathematical concepts beforehand might be beneficial for learning kinematics. Second, instructions have to be designed to teach students the change between different representations.

Supervision of dynamic systems: Monitoring, decision-making and control

NASA Technical Reports Server (NTRS)

White, T. N.

1982-01-01

Effects of task variables on the performance of the human supervisor by means of modelling techniques are discussed. The task variables considered are: The dynamics of the system, the task to be performed, the environmental disturbances and the observation noise. A relationship between task variables and parameters of a supervisory model is assumed. The model consists of three parts: (1) The observer part is thought to be a full order optimal observer, (2) the decision-making part is stated as a set of decision rules, and (3) the controller part is given by a control law. The observer part generates, on the basis of the system output and the control actions, an estimate of the state of the system and its associated variance. The outputs of the observer part are then used by the decision-making part to determine the instants in time of the observation actions on the one hand and the controls actions on the other. The controller part makes use of the estimated state to derive the amplitude(s) of the control action(s).

Manufacture of large glass honeycomb mirrors. [for astronomical telescopes

NASA Technical Reports Server (NTRS)

Angel, J. R. P.; Hill, J. M.

1982-01-01

The problem of making very large glass mirrors for astronomical telescopes is examined, and the advantages of honeycomb mirrors made of borosilicate glass are discussed. Thermal gradients in the glass that degrade the figure of thick borosilicate mirrors during use can be largely eliminated in a honeycomb structure by internal ventilation (in air) or careful control of the radiation environment (in space). It is expected that ground-based telescopes with honeycomb mirrors will give better images than those with solid mirrors. Materials, techniques, and the experience that has been gained making trial mirrors and test castings as part of a program to develop 8-10-m-diameter lightweight mirrors are discussed.

Replacement of steel parts with extruded aluminum alloys in an automobile

NASA Astrophysics Data System (ADS)

Daggula, Manikantha Reddy

Over the past years, vehicle emissions have shown a negative impact on environment and human health. A new strategy has been used by automakers to reduce a vehicle's weight which significantly reduce fuel consumption and C02 emissions. A very light car consumes very less fuel as it needs to overcome less inertia, decreasing the required power to movie the vehicle. Reducing weight is the easiest way to increase fuel economy and making it by just 10% can increase its efficiency 6 to 8 percent. For a normal scale 80% of vehicles weight is shared among chassis, power train and other exterior components. Almost 60% of the vehicles weight is comprised of steel and the remaining is with cast and extruded aluminum and magnesium alloys. Our main aim is to look for the parts like Fuel tank holder, Fuel filler neck, Turbo inlet assembly, and Brake lines, Dash board frame which are made from steel and replace them with extruded aluminum alloys, to analyze a conventional rear wheel aluminum drive shaft and replace it with a new design and with a new aluminum alloy. The current project involves dismantling an automobile and looking for feasible steel parts and making samples, analyzing the hardness of the samples. These parts are optimally analyzed using Ansys Finite element analysis tool, these parts are subjected to the constraints such as three-point bending, tensile testing, hydrostatic pressure and also torsional stress action on the drive shaft, the deformation and stress are observed in these parts. The results show the current steel parts can be replaced with 3000 series aluminum alloy and the drive shaft can be replaced with new design with 6061-T6 Al-alloy which decreases 25% of the shaft weight.

Demonstration Testing of Plastic Media Blasting (PMB) at LetterKenny Army Depot.

DTIC Science & Technology

1989-01-10

media can typically be purchased in three grades; Type I (polyester), Type II ( urea formaldehyde ), and Type III ( melamine formaldehyde ). The hardness of...outlet for waste thermoset resin from button making operations. As plastic media is synthetic, the~properties of plastic oedia can be controlled to a...After the oven comes to temperature, the parts are heated for an appropriate time, usually several hours, to pyrolyze the organic resin coating. The

Shift focal spot X-ray tube to the imposition anode under long exposure

NASA Astrophysics Data System (ADS)

Obodovskiy, A. V.; Bessonov, V. B.; Larionov, I. A.

2018-02-01

X-ray non-destructive testing is an integral part of any modern industrial production. Microfocus X-ray sources make it possible to obtain projected images with an increased spatial resolution by using a direct geometric magnification during the survey. On the basis of the St. Petersburg State Electrotechnical University staff of the department of electronic devices and equipment has been designed model of microfocus X-ray computed tomography.

The Citicoline Brain Injury Treatment (COBRIT) Trial: Design and Methods

PubMed Central

Zafonte, Ross; Lee, Shing M.; Levin, Bruce; Diaz-Arrastia, Ramon; Ansel, Beth; Eisenberg, Howard; Timmons, Shelly D.; Temkin, Nancy; Novack, Thomas; Ricker, Joseph; Merchant, Randall; Jallo, Jack

2009-01-01

Abstract Traumatic brain injury (TBI) is a major cause of death and disability. In the United States alone approximately 1.4 million sustain a TBI each year, of which 50,000 people die, and over 200,000 are hospitalized. Despite numerous prior clinical trials no standard pharmacotherapy for the treatment of TBI has been established. Citicoline, a naturally occurring endogenous compound, offers the potential of neuroprotection, neurorecovery, and neurofacilitation to enhance recovery after TBI. Citicoline has a favorable side-effect profile in humans and several meta-analyses suggest a benefit of citicoline treatment in stroke and dementia. COBRIT is a randomized, double-blind, placebo-controlled, multi-center trial of the effects of 90 days of citicoline on functional outcome in patients with complicated mild, moderate, and severe TBI. In all, 1292 patients will be recruited over an estimated 32 months from eight clinical sites with random assignment to citicoline (1000 mg twice a day) or placebo (twice a day), administered enterally or orally. Functional outcomes are assessed at 30, 90, and 180 days after the day of randomization. The primary outcome consists of a set of measures that will be analyzed as a composite measure using a global test procedure at 90 days. The measures comprise the following core battery: the California Verbal Learning Test II; the Controlled Oral Word Association Test; Digit Span; Extended Glasgow Outcome Scale; the Processing Speed Index; Stroop Test part 1 and Stroop Test part 2; and Trail Making Test parts A and B. Secondary outcomes include survival, toxicity, and rate of recovery. PMID:19803786

Data Analysis for the LISA Pathfinder Mission

NASA Technical Reports Server (NTRS)

Thorpe, James Ira

2009-01-01

The LTP (LISA Technology Package) is the core part of the Laser Interferometer Space Antenna (LISA) Pathfinder mission. The main goal of the mission is to study the sources of any disturbances that perturb the motion of the freely-falling test masses from their geodesic trajectories as well as 10 test various technologies needed for LISA. The LTP experiment is designed as a sequence of experimental runs in which the performance of the instrument is studied and characterized under different operating conditions. In order to best optimize subsequent experimental runs, each run must be promptly analysed to ensure that the following ones make best use of the available knowledge of the instrument ' In order to do this, all analyses must be designed and tested in advance of the mission and have sufficient built-in flexibility to account for unexpected results or behaviour. To support this activity, a robust and flexible data analysis software package is also required. This poster presents two of the main components that make up the data analysis effort: the data analysis software and the mock-data challenges used to validate analysis procedures and experiment designs.

Neuropsychological Correlates of Hazard Perception in Older Adults.

PubMed

McInerney, Katalina; Suhr, Julie

2016-03-01

Hazard perception, the ability to identify and react to hazards while driving, is of growing importance in driving research, given its strong relationship to real word driving variables. Furthermore, although poor hazard perception is associated with novice drivers, recent research suggests that it declines with advanced age. In the present study, we examined the neuropsychological correlates of hazard perception in a healthy older adult sample. A total of 68 adults age 60 and older who showed no signs of dementia and were active drivers completed a battery of neuropsychological tests as well as a hazard perception task. Tests included the Repeatable Battery for the Assessment of Neuropsychological Status, Wechsler Test of Adult Reading, Trail Making Test, Block Design, Useful Field of View, and the Delis-Kaplan Executive Function System Color Word Interference Test. Hazard perception errors were related to visuospatial/constructional skills, processing speed, memory, and executive functioning skills, with a battery of tests across these domains accounting for 36.7% of the variance in hazard perception errors. Executive functioning, particularly Trail Making Test part B, emerged as a strong predictor of hazard perception ability. Consistent with prior work showing the relationship of neuropsychological performance to other measures of driving ability, neuropsychological performance was associated with hazard perception skill. Future studies should examine the relationship of neuropsychological changes in adults who are showing driving impairment and/or cognitive changes associated with Mild Cognitive Impairment or dementia.

Comparative study of impact of hemodialysis and renal transplantation on cognitive functions in ESRD patients.

PubMed

Anwar, Waleed; Ezzat, Haitham; Mohab, Amr

2015-01-01

Cognitive impairment is defined as a newly appeared deficit in at least two areas of cognitive functions, including disturbances in memory, executive functioning, attention or speed of information processing, perceptual motor abilities, or language. Cognitive impairment is highly prevalent in ESRD patients when compared with the general population. It has also been associated with a decreased quality of life. Cognitive functions in patients with ESRD showed improvement with dialysis and renal transplantation. These findings illustrate the potential importance of evaluating and comparing the effects of hemodialysis and transplantation regarding cognitive performance and thus quality of life in ESRD patients and normal subjects. This study was carried out in 100 patients (50 ESRD patients on regular hemodialysis for at least 6 months and 50 post-transplant patients who had maintained successful kidney graft for at least 3 months). All patients underwent laboratory and psychometric scoring tests, including trail making test part A, trail making test part B, digit span, and mini-mental state examination. Thirty healthy adults matched by age and sex served as a control group. The results showed significant differences in cognitive function tests results between transplant and hemodialysis patients (P<0.01), suggesting that transplant patients were superior in their cognitive performance, with the correction of anemia being the most important factor for improving cognitive performance in both groups. There were no significant differences between transplant patients and control subjects in psychometric measures (P>0.05). Renal transplantation as a modality of treatment, in ESRD patients, is superior to hemodialysis in terms of cognitive performance improvement. Copyright © 2015 Sociedad Española de Nefrología. Published by Elsevier España, S.L.U. All rights reserved.

Neuropsychological, balance, and mobility risk factors for falls in people with multiple sclerosis: a prospective cohort study.

PubMed

Hoang, Phu D; Cameron, Michelle H; Gandevia, Simon C; Lord, Stephen R

2014-03-01

To determine whether impaired performance in a range of vision, proprioception, neuropsychological, balance, and mobility tests and pain and fatigue are associated with falls in people with multiple sclerosis (PwMS). Prospective cohort study with 6-month follow-up. A multiple sclerosis (MS) physiotherapy clinic. Community-dwelling people (N=210; age range, 21-74y) with MS (Disease Steps 0-5). Not applicable. Incidence of falls during 6 months' follow-up. In the 6-month follow-up period, 83 participants (39.7%) experienced no falls, 57 (27.3%) fell once or twice, and 69 (33.0%) fell 3 or more times. Frequent falling (≥3) was associated with increased postural sway (eyes open and closed), poor leaning balance (as assessed with the coordinated stability task), slow choice stepping reaction time, reduced walking speed, reduced executive functioning (as assessed with the difference between Trail Making Test Part B and Trail Making Test Part A), reduced fine motor control (performance on the 9-Hole Peg Test [9-HPT]), and reported leg pain. Increased sway with the eyes closed, poor coordinated stability, and reduced performance in the 9-HPT were identified as variables that significantly and independently discriminated between frequent fallers and nonfrequent fallers (model χ(2)3=30.1, P<.001). The area under the receiver operating characteristic curve for this model was .712 (95% confidence interval, .638-.785). The study reveals important balance, coordination, and cognitive determinants of falls in PwMS. These should assist the development of effective strategies for prevention of falls in this high-risk group. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

47 CFR 1.1200 - Introduction.

Code of Federal Regulations, 2010 CFR

2010-10-01

... § 1.1200 Introduction. (a) Purpose. To ensure the fairness and integrity of its decision-making, the...-but-disclose” proceedings, in which ex parte presentations to Commission decision-making personnel are... ex parte presentations to and from Commission decision-making personnel are generally prohibited (§ 1...

Analysis of separation test for automatic brake adjuster based on linear radon transformation

NASA Astrophysics Data System (ADS)

Luo, Zai; Jiang, Wensong; Guo, Bin; Fan, Weijun; Lu, Yi

2015-01-01

The linear Radon transformation is applied to extract inflection points for online test system under the noise conditions. The linear Radon transformation has a strong ability of anti-noise and anti-interference by fitting the online test curve in several parts, which makes it easy to handle consecutive inflection points. We applied the linear Radon transformation to the separation test system to solve the separating clearance of automatic brake adjuster. The experimental results show that the feature point extraction error of the gradient maximum optimal method is approximately equal to ±0.100, while the feature point extraction error of linear Radon transformation method can reach to ±0.010, which has a lower error than the former one. In addition, the linear Radon transformation is robust.

Transport Properties of Bulk Thermoelectrics An International Round-Robin Study, Part I: Seebeck Coefficient and Electrical Resistivity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Hsin; Porter, Wallace D; Bottner, Harold

2013-01-01

Recent research and development of high temperature thermoelectric materials has demonstrated great potential of converting automobile exhaust heat directly into electricity. Thermoelectrics based on classic bismuth telluride have also started to impact the automotive industry by enhancing air conditioning efficiency and integrated cabin climate control. In addition to engineering challenges of making reliable and efficient devices to withstand thermal and mechanical cycling, the remaining issues in thermoelectric power generation and refrigeration are mostly materials related. The figure-of-merit, ZT, still needs to improve from the current value of 1.0 - 1.5 to above 2 to be competitive to other alternative technologies.more » In the meantime, the thermoelectric community could greatly benefit from the development of international test standards, improved test methods and better characterization tools. Internationally, thermoelectrics have been recognized by many countries as an important area for improving energy efficiency. The International Energy Agency (IEA) group under the implementing agreement for Advanced Materials for Transportation (AMT) identified thermoelectric materials as an important area in 2009. This paper is Part I of the international round-robin testing of transport properties of bulk thermoelectrics. The main focuses in Part I are on two electronic transport properties: Seebeck coefficient and electrical resistivity.« less

Transport Properties of Bulk Thermoelectrics—An International Round-Robin Study, Part I: Seebeck Coefficient and Electrical Resistivity

NASA Astrophysics Data System (ADS)

Wang, Hsin; Porter, Wallace D.; Böttner, Harald; König, Jan; Chen, Lidong; Bai, Shengqiang; Tritt, Terry M.; Mayolet, Alex; Senawiratne, Jayantha; Smith, Charlene; Harris, Fred; Gilbert, Patricia; Sharp, Jeff W.; Lo, Jason; Kleinke, Holger; Kiss, Laszlo

2013-04-01

Recent research and development of high-temperature thermoelectric materials has demonstrated great potential for converting automobile exhaust heat directly into electricity. Thermoelectrics based on classic bismuth telluride have also started to impact the automotive industry by enhancing air-conditioning efficiency and integrated cabin climate control. In addition to engineering challenges of making reliable and efficient devices to withstand thermal and mechanical cycling, the remaining issues in thermoelectric power generation and refrigeration are mostly materials related. The dimensionless figure of merit, ZT, still needs to be improved from the current value of 1.0 to 1.5 to above 2.0 to be competitive with other alternative technologies. In the meantime, the thermoelectric community could greatly benefit from the development of international test standards, improved test methods, and better characterization tools. Internationally, thermoelectrics have been recognized by many countries as a key component for improving energy efficiency. The International Energy Agency (IEA) group under the Implementing Agreement for Advanced Materials for Transportation (AMT) identified thermoelectric materials as an important area in 2009. This paper is part I of the international round-robin testing of transport properties of bulk thermoelectrics. The main foci in part I are the measurement of two electronic transport properties: Seebeck coefficient and electrical resistivity.

Test Rack Development for Extended Operation of Advanced Stirling Convertors at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Dugala, Gina M.

2010-01-01

The U.S. Department of Energy, Lockheed Martin Space Systems Company, Sunpower Inc., and NASA Glenn Research Center (GRC) have been developing an Advanced Stirling Radioisotope Generator (ASRG) for use as a power system on space science missions. This generator will make use of free-piston Stirling convertors to achieve higher conversion efficiency than with currently available alternatives. One part of NASA GRC's support of ASRG development includes extended operation testing of Advanced Stirling Convertors (ASCs) developed by Sunpower Inc. and GRC. The ASC consists of a free-piston Stirling engine integrated with a linear alternator. NASA GRC has been building test facilities to support extended operation of the ASCs for several years. Operation of the convertors in the test facility provides convertor performance data over an extended period of time. One part of the test facility is the test rack, which provides a means for data collection, convertor control, and safe operation. Over the years, the test rack requirements have changed. The initial ASC test rack utilized an alternating-current (AC) bus for convertor control; the ASRG Engineering Unit (EU) test rack can operate with AC bus control or with an ASC Control Unit (ACU). A new test rack is being developed to support extended operation of the ASC-E2s with higher standards of documentation, component selection, and assembly practices. This paper discusses the differences among the ASC, ASRG EU, and ASC-E2 test racks.

The Iowa Gambling Task in fMRI Images

PubMed Central

Li, Xiangrui; Lu, Zhong-Lin; D'Argembeau, Arnaud; Ng, Marie; Bechara, Antoine

2009-01-01

The Iowa Gambling Task (IGT) is a sensitive test for the detection of decision-making impairments in several neurologic and psychiatric populations. Very few studies have employed the IGT in fMRI investigations, in part, because the task is cognitively complex. Here we report a method for exploring brain activity using fMRI during performance of the IGT. Decision-making during the IGT was associated with activity in several brain regions in a group of healthy individuals. The activated regions were consistent with the neural circuitry hypothesized to underlie somatic marker activation and decision-making. Specifically, a neural circuitry involving the dorsolateral prefrontal cortex (for working memory), the insula and posterior cingulate cortex (for representations of emotional states), the mesial orbitofrontal and ventromedial prefrontal cortex (for coupling the two previous processes), the ventral striatum and anterior cingulate/SMA (supplementary motor area) for implementing behavioral decisions was engaged. These results have implications for using the IGT to study abnormal mechanisms of decision making in a variety of clinical populations. PMID:19777556

Asset Analysis and Operational Concepts for Separation Assurance Flight Testing at Dryden Flight Research Center

NASA Technical Reports Server (NTRS)

Costa, Guillermo J.; Arteaga, Ricardo A.

2011-01-01

A preliminary survey of existing separation assurance and collision avoidance advancements, technologies, and efforts has been conducted in order to develop a concept of operations for flight testing autonomous separation assurance at Dryden Flight Research Center. This effort was part of the Unmanned Aerial Systems in the National Airspace System project. The survey focused primarily on separation assurance projects validated through flight testing (including lessons learned), however current forays into the field were also examined. Comparisons between current Dryden flight and range assets were conducted using House of Quality matrices in order to allow project management to make determinations regarding asset utilization for future flight tests. This was conducted in order to establish a body of knowledge of the current collision avoidance landscape, and thus focus Dryden s efforts more effectively towards the providing of assets and test ranges for future flight testing within this research field.

Reliability and Construct Validity of Limits of Stability Test in Adolescents Using a Portable Forceplate System.

PubMed

Alsalaheen, Bara; Haines, Jamie; Yorke, Amy; Broglio, Steven P

2015-12-01

To examine the reliability, convergent, and discriminant validity of the limits of stability (LOS) test to assess dynamic postural stability in adolescents using a portable forceplate system. Cross-sectional reliability observational study. School setting. Adolescents (N=36) completed all measures during the first session. To examine the reliability of the LOS test, a subset of 15 participants repeated the LOS test after 1 week. Not applicable. Outcome measurements included the LOS test, Balance Error Scoring System, Instrumented Balance Error Scoring System, and Modified Clinical Test for Sensory Interaction on Balance. A significant relation was observed among LOS composite scores (r=.36-.87, P<.05). However, no relation was observed between LOS and static balance outcome measurements. The reliability of the LOS composite scores ranged from moderate to good (intraclass correlation coefficient model 2,1=.73-.96). The results suggest that the LOS composite scores provide unique information about dynamic postural stability, and the LOS test completed at 100% of the theoretical limit appeared to be a reliable test of dynamic postural stability in adolescents. Clinicians should use dynamic balance measurement as part of their balance assessment and should not use static balance testing (eg, Balance Error Scoring System) to make inferences about dynamic balance, especially when balance assessment is used to determine rehabilitation outcomes, or when making return to play decisions after injury. Copyright © 2015 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Improving Decision Making about Genetic Testing in the Clinic: An Overview of Effective Knowledge Translation Interventions.

PubMed

Légaré, France; Robitaille, Hubert; Gane, Claire; Hébert, Jessica; Labrecque, Michel; Rousseau, François

2016-01-01

Knowledge translation (KT) interventions are attempts to change behavior in keeping with scientific evidence. While genetic tests are increasingly available to healthcare consumers in the clinic, evidence about their benefits is unclear and decisions about genetic testing are thus difficult for all parties. We sought to identify KT interventions that involved decisions about genetic testing in the clinical context and to assess their effectiveness for improving decision making in terms of behavior change, increased knowledge and wellbeing. We searched for trials assessing KT interventions in the context of genetic testing up to March 2014 in all systematic reviews (n = 153) published by two Cochrane review groups: Effective Practice and Organisation of Care (EPOC) and Consumers and Communication. We retrieved 2473 unique trials of which we retained only 28 (1%). Two EPOC reviews yielded two trials of KT interventions: audit and feedback (n = 1) and educational outreach (n = 1). Both targeted health professionals and the KT intervention they assessed was found to be effective. Four Consumers and Communication reviews yielded 26 trials: decision aids (n = 15), communication of DNA-based disease risk estimates (n = 7), personalized risk communication (n = 3) and mobile phone messaging (n = 1). Among these, 25 trials targeted only health consumers or patients and the KT interventions were found to be effective in four trials, partly effective in seven, and ineffective in four. Lastly, only one trial targeted both physicians and patients and was found to be effective. More research on the effectiveness of KT interventions regarding genetic testing in the clinical context may contribute to patients making informed value-based decisions and drawing the maximum benefit from clinical applications of genetic and genomic innovations.

Assessment of oxidative stress in serum by d-ROMs test.

PubMed

Kilk, K; Meitern, R; Härmson, O; Soomets, U; Hõrak, P

2014-08-01

Assessment of oxidative stress is an important but technically challenging procedure in medical and biological research. The reactive oxygen metabolites (d-ROMs) test is a simple assay marketed for analyzing the total amount of hydroperoxides in serum via the Fenton's reaction. Earlier reports have raised a suspicion that a part of the signal detected in the assay comes from sources other than metabolites generated by oxidative stress. The aim of this study was to identify which serum components interfere with the d-ROMs signal. By application of sodium azide, ethylenediaminetetraacetic acid, sodium dodecylsulphate, varying temperature, and spiking endogenous substances we demonstrate that in the case of mammalian sera the assay determines ceruloplasmin (CP) activity with potential interferences from hydroperoxides, iron level, thiols, and albumin. In sera of avian species hydroperoxides contribute more to the test outcome, but the CP part is insensitive to inhibition by azide. In conclusion, this assay has deficiencies in terms of detecting realistic concentrations of hydroperoxides, is mostly measuring CP and is also interfered with other serum components, making it very difficult to interpret in most biological systems.

Intelligent Soft Computing on Forex: Exchange Rates Forecasting with Hybrid Radial Basis Neural Network

PubMed Central

Marcek, Dusan; Durisova, Maria

2016-01-01

This paper deals with application of quantitative soft computing prediction models into financial area as reliable and accurate prediction models can be very helpful in management decision-making process. The authors suggest a new hybrid neural network which is a combination of the standard RBF neural network, a genetic algorithm, and a moving average. The moving average is supposed to enhance the outputs of the network using the error part of the original neural network. Authors test the suggested model on high-frequency time series data of USD/CAD and examine the ability to forecast exchange rate values for the horizon of one day. To determine the forecasting efficiency, they perform a comparative statistical out-of-sample analysis of the tested model with autoregressive models and the standard neural network. They also incorporate genetic algorithm as an optimizing technique for adapting parameters of ANN which is then compared with standard backpropagation and backpropagation combined with K-means clustering algorithm. Finally, the authors find out that their suggested hybrid neural network is able to produce more accurate forecasts than the standard models and can be helpful in eliminating the risk of making the bad decision in decision-making process. PMID:26977450

Intelligent Soft Computing on Forex: Exchange Rates Forecasting with Hybrid Radial Basis Neural Network.

PubMed

Falat, Lukas; Marcek, Dusan; Durisova, Maria

2016-01-01

This paper deals with application of quantitative soft computing prediction models into financial area as reliable and accurate prediction models can be very helpful in management decision-making process. The authors suggest a new hybrid neural network which is a combination of the standard RBF neural network, a genetic algorithm, and a moving average. The moving average is supposed to enhance the outputs of the network using the error part of the original neural network. Authors test the suggested model on high-frequency time series data of USD/CAD and examine the ability to forecast exchange rate values for the horizon of one day. To determine the forecasting efficiency, they perform a comparative statistical out-of-sample analysis of the tested model with autoregressive models and the standard neural network. They also incorporate genetic algorithm as an optimizing technique for adapting parameters of ANN which is then compared with standard backpropagation and backpropagation combined with K-means clustering algorithm. Finally, the authors find out that their suggested hybrid neural network is able to produce more accurate forecasts than the standard models and can be helpful in eliminating the risk of making the bad decision in decision-making process.

Effect of weight loss, exercise, or both on cognition and quality of life in obese older adults1234

PubMed Central

Napoli, Nicola; Shah, Krupa; Waters, Debra L; Sinacore, David R; Qualls, Clifford; Villareal, Dennis T

2014-01-01

Background: Obesity impairs cognition and health-related quality of life (HRQOL) in older adults; however, the appropriate treatment of obese older adults remains controversial. Objective: The objective was to determine the independent and combined effects of weight loss and exercise on cognition, mood, and HRQOL in obese older adults. Design: One hundred seven frail, obese older adults were randomly assigned to a control, weight-management (diet), exercise, or weight-management-plus-exercise (diet-exercise) group for 1 y. In this secondary analysis, main outcomes were Modified Mini-Mental State Examination (3MS) and total Impact of Weight on Quality of Life-Lite (IWQOL) scores. Other outcomes included Word Fluency Test, Trail Making Test Parts A and B, and Geriatric Depression Scale (GDS) scores. Results: Scores on the 3MS improved more in the diet (mean ± SE: 1.7 ± 0.4), exercise (2.8 ± 0.4), and diet-exercise (2.9 ± 0.4) groups than in the control group (0.1 ± 0.4) (between-group P = 0.0001–0.04); scores in the diet-exercise group improved more than in the diet group but not more than in the exercise group. Scores on the Word Fluency Test improved more in the exercise (4.1 ± 0.8) and diet-exercise (4.2 ± 0.7) groups than in the control group (−0.8 ± 0.8; both P = 0.001). For the Trail Making Test Part A, scores in the diet-exercise group (−11.8 ± 1.9) improved more than in the control group (−0.8 ± 1.9) (P = 0.001); a similar finding was observed for the Trail Making Test Part B. Scores on the IWQOL improved more in the diet (7.6 ± 1.6), exercise (10.1 ± 1.6), and diet-exercise (14.0 ± 1.4) groups than in the control group (0.3 ± 1.6) (P = 0.0001–0.03); scores in the diet-exercise group improved more than in the diet group but not more than in the exercise group. In the diet-exercise group, peak oxygen consumption and strength changes were independent predictors of 3MS changes; weight and strength changes were independent predictors of IWQOL changes. GDS scores did not change. Conclusions: Weight loss and exercise each improve cognition and HRQOL, but their combination may provide benefits similar to exercise alone. These findings could inform practice guidelines with regard to optimal treatment strategies for obese older adults. This trial was registered atclinicaltrials.govas NCT00146107. PMID:24787497

Effects of rumenic acid rich conjugated linoleic acid supplementation on cognitive function and handgrip performance in older men and women.

PubMed

Jenkins, Nathaniel D M; Housh, Terry J; Miramonti, Amelia A; McKay, Brianna D; Yeo, Noelle M; Smith, Cory M; Hill, Ethan C; Cochrane, Kristen C; Cramer, Joel T

2016-11-01

The purpose of this study was to investigate the effects of 8weeks at 6g per day of RAR CLA versus placebo on cognitive function and handgrip performance in older men and women. Sixty-five (43 women, 22 men) participants (mean±SD; age=72.4±5.9yrs; BMI=26.6±4.2kg·m -2 ) were randomly assigned to a RAR CLA (n=30: 10 men, 20 women) or placebo (PLA; high oleic sunflower oil; n=35: 12 men, 23 women) group in double-blind fashion and consumed 6g·d -1 of their allocated supplement for 8weeks. Before (Visit 1) and after supplementation (Visit 2), subjects completed the Serial Sevens Subtraction Test (S 7 ), Trail Making Test Part A (TM A ) and Part B (TM B ), and Rey's Auditory Verbal Learning Test (RAVLT) to measure cognitive function. The RAVLT included 5, 15-item auditory word recalls (R 1-5 ), an interference word recall (R B ), a 6th word recall (R 6 ), and a 15-item visual word recognition trial (R R ). For handgrip performance, subjects completed maximal voluntary isometric handgrip strength (MVIC) testing before (MVIC PRE ) and after (MVIC POST ) a handgrip fatigue test at 50% MVIC PRE . Hand joint discomfort was measured during MVIC PRE , MVIC POST , and the handgrip fatigue test. There were no treatment differences (p>0.05) for handgrip strength, handgrip fatigue, or cognitive function as measured by the Trail Making Test and Serial Seven's Subtraction Test in men or women. However, RAR CLA supplementation improved cognitive function as indicated by the RAVLT R 5 in men. A qualitative examination of the mean change scores suggested that, compared to PLA, RAR CLA supplementation was associated with a small improvement in joint discomfort in both men and women. Longer-term studies are needed to more fully understand the potential impact of RAR CLA on cognitive function and hand joint discomfort in older adults, particularly in those with lower cognitive function. Copyright © 2016 Elsevier Inc. All rights reserved.

Trait anxiety affects decision-making differently in healthy men and women: towards gender-specific endophenotypes of anxiety.

PubMed

de Visser, L; van der Knaap, L J; van de Loo, A J A E; van der Weerd, C M M; Ohl, F; van den Bos, R

2010-05-01

Excessive levels of trait anxiety are a risk factor for psychiatric conditions, including anxiety disorders and substance abuse. High trait anxiety has been associated with altered cognitive functioning, in particular with an attentional bias towards aversive stimuli. Decision-making is a crucial aspect of cognitive functioning that relies on the correct processing and control of emotional stimuli. Interestingly, anxiety and decision-making share underlying neural substrates, involving cortico-limbic pathways, including the amygdala, striatum and medial and dorsolateral prefrontal cortices. In the present study, we investigated the relationship between trait anxiety, measured by the State-Trait Anxiety Inventory, and complex decision-making, measured by the Iowa Gambling Task, in healthy male and female volunteers. The main focus of this study was the inclusion of gender as a discriminative factor. Indeed, we found distinct gender-specific effects of trait anxiety: in men, both low and high anxiety groups showed impaired decision-making compared to medium anxiety individuals, whereas in women only high anxiety individuals performed poorly. Furthermore, anxiety affected decision-making in men early in the task, i.e. the exploration phase, as opposed to an effect on performance in women during the second part of the test, i.e. the exploitation phase. These findings were related to different profiles of trait anxiety in men and women, and were independent of performance in the Wisconsin Card Sorting Test and cortisol levels. Our data show gender-specific effects of trait anxiety on emotional decision-making. We suggest gender-specific endophenotypes of anxiety to exist, that differentially affect cognitive functioning. 2010 Elsevier Ltd. All rights reserved.

Exploring, tuning, and exploiting the basicity of hydrotalcites for applications in heterogeneous catalysis.

PubMed

Debecker, Damien P; Gaigneaux, Eric M; Busca, Guido

2009-01-01

Basic catalysis! The basic properties of hydrotalcites (see picture) make them attractive for numerous catalytic applications. Probing the basicity of the catalysts is crucial to understand the base-catalysed processes and to optimise the catalyst preparation. Various parameters can be employed to tune the basic properties of hydrotalcite-based catalysts towards the basicity demanded by each target chemical reaction.Hydrotalcites offer unique basic properties that make them very attractive for catalytic applications. It is of primary interest to make use of accurate tools for probing the basicity of hydrotalcite-based catalysts for the purpose of 1) fundamental understanding of base-catalysed processes with hydrotalcites and 2) optimisation of the catalytic performance achieved in reactions of industrial interest. Techniques based on probe molecules, titration techniques and test reactions along with physicochemical characterisation are overviewed in the first part of this review. The aim is to provide the tools for understanding how series of parameters involved in the preparation of hydrotalcite-based catalytic materials can be employed to control and adapt the basic properties of the catalyst towards the basicity demanded by each target chemical reaction. An overview of recent and significant achievements in that perspective is presented in the second part of the paper.

Making Healthy Choices Easier: Regulation versus Nudging.

PubMed

Hansen, Pelle Guldborg; Skov, Laurits Rohden; Skov, Katrine Lund

2016-01-01

In recent years, the nudge approach to behavior change has emerged from the behavioral sciences to challenge the traditional use of regulation in public health strategies to address modifiable individual-level behaviors related to the rise of noncommunicable diseases and their treatment. However, integration and testing of the nudge approach as part of more comprehensive public health strategies aimed at making healthy choices easier are being threatened by inadequate understandings of its scientific character, its relationship with regulation, and its ethical implications. This article reviews this character and its ethical implication with a special emphasis on the compatibility of nudging with traditional regulation, special domains of experience, and the need for a more nuanced approach to the ethical debate. The aim is to advance readers' understanding and give guidance to those who have considered working with or incorporating the nudge approach into programs or policies aimed at making healthful choices easier.

KSC-2009-4610

NASA Image and Video Library

2009-08-12

CAPE CANAVERAL, Fla. – In the Vehicle Assembly Building's High Bay 3, the Ares I-X rocket is being assembled on the mobile launcher platform. Super Stack 4 has just been mated to Super Stack 3 on top. Five super stacks make up the upper stage that will be integrated with the four-segment solid rocket booster first stage on the mobile launch platform. Ares I-X is the test vehicle for the Ares I, which is part of the Constellation Program to return men to the moon and beyond. The Ares I-X flight test is targeted for Oct. 31, pending formal NASA Headquarters approval. Photo credit: NASA/Jack Pfaller

KSC-2009-4609

NASA Image and Video Library

2009-08-12

CAPE CANAVERAL, Fla. – In the Vehicle Assembly Building's High Bay 3, the Ares I-X rocket is being assembled on the mobile launcher platform. Super Stack 4 has just been mated to Super Stack 3 on top. Five super stacks make up the upper stage that will be integrated with the four-segment solid rocket booster first stage on the mobile launch platform. Ares I-X is the test vehicle for the Ares I, which is part of the Constellation Program to return men to the moon and beyond. The Ares I-X flight test is targeted for Oct. 31, pending formal NASA Headquarters approval. Photo credit: NASA/Jack Pfaller

Mechatronics Education: From Paper Design to Product Prototype Using LEGO NXT Parts

NASA Astrophysics Data System (ADS)

Lofaro, Daniel M.; Le, Tony Truong Giang; Oh, Paul

The industrial design cycle starts with design then simulation, prototyping, and testing. When the tests do not match the design requirements the design process is started over again. It is important for students to experience this process before they leave their academic institution. The high cost of the prototype phase, due to CNC/Rapid Prototype machine costs, makes hands on study of this process expensive for students and the academic institutions. This document shows that the commercially available LEGO NXT Robot kit is a viable low cost surrogate to the expensive industrial CNC/Rapid Prototype portion of the industrial design cycle.

STS-48 MS Brown on OV-103's aft flight deck poses for ESC photo

NASA Technical Reports Server (NTRS)

1991-01-01

STS-48 Mission Specialist (MS) Mark N. Brown looks away from the portable laptop computer screen to pose for an Electronic Still Camera (ESC) photo on the aft flight deck of the earth-orbiting Discovery, Orbiter Vehicle (OV) 103. Brown was working at the payload station before the interruption. Crewmembers were testing the ESC as part of Development Test Objective (DTO) 648, Electronic Still Photography. The digital image was stored on a removable hard disk or small optical disk, and could be converted to a format suitable for downlink transmission. The ESC is making its initial appearance on this Space Shuttle mission.

STS-48 Commander Creighton on OV-103's aft flight deck poses for ESC photo

NASA Technical Reports Server (NTRS)

1991-01-01

STS-48 Commander John O. Creighton, positioned under overhead window W8, interrupts an out-the-window observation to display a pleasant countenance for an electronic still camera (ESC) photo on the aft flight deck of the earth-orbiting Discovery, Orbiter Vehicle (OV) 103. Crewmembers were testing the ESC as part of Development Test Objective (DTO) 648, Electronic Still Photography. The digital image was stored on a removable hard disk or small optical disk, and could be converted to a format suitable for downlink transmission. The ESC is making its initial appearance on this Space Shuttle mission.

An efficiency-decay model for Lumen maintenance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bobashev, Georgiy; Baldasaro, Nicholas G.; Mills, Karmann C.

Proposed is a multicomponent model for the estimation of light-emitting diode (LED) lumen maintenance using test data that were acquired in accordance with the test standards of the Illumination Engineering Society of North America, i.e., LM-80-08. Lumen maintenance data acquired with this test do not always follow exponential decay, particularly data collected in the first 1000 h or under low-stress (e.g., low temperature) conditions. This deviation from true exponential behavior makes it difficult to use the full data set in models for the estimation of lumen maintenance decay coefficient. As a result, critical information that is relevant to the earlymore » life or low-stress operation of LED light sources may be missed. We present an efficiency-decay model approach, where all lumen maintenance data can be used to provide an alternative estimate of the decay rate constant. The approach considers a combined model wherein one part describes an initial “break-in” period and another part describes the decay in lumen maintenance. During the break-in period, several mechanisms within the LED can act to produce a small (typically <; 10%) increase in luminous flux. The effect of the break-in period and its longevity is more likely to be present at low-ambient temperatures and currents, where the discrepancy between a standard TM-21 approach and our proposed model is the largest. For high temperatures and currents, the difference between the estimates becomes nonsubstantial. Finally, our approach makes use of all the collected data and avoids producing unrealistic estimates of the decay coefficient.« less

An efficiency-decay model for Lumen maintenance

DOE PAGES

Bobashev, Georgiy; Baldasaro, Nicholas G.; Mills, Karmann C.; ...

2016-08-25

Proposed is a multicomponent model for the estimation of light-emitting diode (LED) lumen maintenance using test data that were acquired in accordance with the test standards of the Illumination Engineering Society of North America, i.e., LM-80-08. Lumen maintenance data acquired with this test do not always follow exponential decay, particularly data collected in the first 1000 h or under low-stress (e.g., low temperature) conditions. This deviation from true exponential behavior makes it difficult to use the full data set in models for the estimation of lumen maintenance decay coefficient. As a result, critical information that is relevant to the earlymore » life or low-stress operation of LED light sources may be missed. We present an efficiency-decay model approach, where all lumen maintenance data can be used to provide an alternative estimate of the decay rate constant. The approach considers a combined model wherein one part describes an initial “break-in” period and another part describes the decay in lumen maintenance. During the break-in period, several mechanisms within the LED can act to produce a small (typically <; 10%) increase in luminous flux. The effect of the break-in period and its longevity is more likely to be present at low-ambient temperatures and currents, where the discrepancy between a standard TM-21 approach and our proposed model is the largest. For high temperatures and currents, the difference between the estimates becomes nonsubstantial. Finally, our approach makes use of all the collected data and avoids producing unrealistic estimates of the decay coefficient.« less

Exploring decision-making for environmental health services: perspectives from four cities.

PubMed

Hunt, C; Lewin, S

2000-01-01

Increasing resources are being allocated to environmental health monitoring, especially for developing methods and collecting data to construct environmental health indicators (EHIs). Yet, little research has focused on understanding how communities and service providers make decisions with regard to environmental health priorities and the role of indicators in this process. This paper presents insights regarding local decision-making that arose from a project to test the feasibility of using community-based EHIs to facilitate communication between the providers and the recipients of environmental services in four developing-country cities. The results of the study indicate that decision-making for environmental health services is complex and iterative rather than rational and linear. Contextual and process factors play an important role. These factors include the morale of service providers, the extent of collaboration between service agencies, the priorities of different community groups and relations between service providers and communities. Scientific information, in the form of EHIs, did not appear to be a key element of decision-making in the settings studied. As tools, EHIs are unlikely to become part of the decision-making process unless they are integrated with local agendas and backed by strong local representation.

25 CFR 516.2 - When may a person to whom this part applies give testimony, make a statement or submit to interview?

Code of Federal Regulations, 2010 CFR

2010-04-01

... testimony, make a statement or submit to interview? 516.2 Section 516.2 Indians NATIONAL INDIAN GAMING... whom this part applies give testimony, make a statement or submit to interview? (a) No person to whom... regulation, shall provide testimony, make a statement or submit to interview. (b) Whenever a subpoena...

A qualitative study looking at informed choice in the context of non‐invasive prenatal testing for aneuploidy

PubMed Central

Hill, Melissa; Chitty, Lyn S.

2016-01-01

Abstract Objective To explore women's attitudes towards non‐invasive prenatal testing (NIPT) and determine factors influencing their decisions around uptake of NIPT. Method We conducted qualitative interviews to assess knowledge, attitude and deliberation amongst women offered NIPT in a public health service. In total, 45 women took part in telephone interviews (79% participation rate). Results Most women could recount the key aspects of NIPT discussed during pre‐test counselling but had variable knowledge about Down syndrome. Analysis of women's attitudes towards undergoing NIPT revealed three dominant factors they considered when reflecting on the test: (1) how NIPT compared with alternative testing options, (2) reflections on coping and (3) moral or religious values. Exploring the deliberative process revealed the different paths women take when making decisions. For some, it was an extension of the decision to have Down syndrome screening; some considered it early on following the booking‐in appointment; others made step‐wise decisions about NIPT when it became relevant to them. Conclusion Our findings support the importance of personalised counselling, whereby women and their partners have the opportunity to reflect on the implications of the test results in the context of their own lives and values. Our data highlight the influence of personal circumstances on decision‐making. © 2016 The Authors. Prenatal Diagnosis published by John Wiley & Sons, Ltd. PMID:27477537

Development of a Procedure to Increase Awareness and Reporting of Counterintelligence and Terrorism Indicators: Personal Acknowledgment of Staff Security (PASS)

DTIC Science & Technology

2013-02-27

signed certification by supervisors that they understand and intend to comply with reporting policy. Recent psychological research suggests that the...intend to comply with reporting policy. Recent psychological research suggests that the additional step of requiring a signed acknowledgment may make...prepared by the Defense Personnel Security Research Center (PERSEREC) as part of an effort to design and pilot test the proposed system. This report was

Novel technique used to treat melanoma and epithelial tumors in new clinical trial | Center for Cancer Research

Cancer.gov

Exomic sequencing allows researchers to read the “letters” in the part of your DNA that makes proteins to see where the letters are correct and where the letters are incorrect. This information allows white blood cells engineered from the patient to recognize these tumor-specific mutations and be made into vaccines, called dendritic cell (DC) vaccines, to test effects on melanoma and epithelial tumors. Read more…

Scramjet test flow reconstruction for a large-scale expansion tube, Part 1: quasi-one-dimensional modelling

NASA Astrophysics Data System (ADS)

Gildfind, D. E.; Jacobs, P. A.; Morgan, R. G.; Chan, W. Y. K.; Gollan, R. J.

2018-07-01

Large-scale free-piston driven expansion tubes have uniquely high total pressure capabilities which make them an important resource for development of access-to-space scramjet engine technology. However, many aspects of their operation are complex, and their test flows are fundamentally unsteady and difficult to measure. While computational fluid dynamics methods provide an important tool for quantifying these flows, these calculations become very expensive with increasing facility size and therefore have to be carefully constructed to ensure sufficient accuracy is achieved within feasible computational times. This study examines modelling strategies for a Mach 10 scramjet test condition developed for The University of Queensland's X3 facility. The present paper outlines the challenges associated with test flow reconstruction, describes the experimental set-up for the X3 experiments, and then details the development of an experimentally tuned quasi-one-dimensional CFD model of the full facility. The 1-D model, which accurately captures longitudinal wave processes, is used to calculate the transient flow history in the shock tube. This becomes the inflow to a higher-fidelity 2-D axisymmetric simulation of the downstream facility, detailed in the Part 2 companion paper, leading to a validated, fully defined nozzle exit test flow.

Scramjet test flow reconstruction for a large-scale expansion tube, Part 1: quasi-one-dimensional modelling

NASA Astrophysics Data System (ADS)

Gildfind, D. E.; Jacobs, P. A.; Morgan, R. G.; Chan, W. Y. K.; Gollan, R. J.

2017-11-01

Large-scale free-piston driven expansion tubes have uniquely high total pressure capabilities which make them an important resource for development of access-to-space scramjet engine technology. However, many aspects of their operation are complex, and their test flows are fundamentally unsteady and difficult to measure. While computational fluid dynamics methods provide an important tool for quantifying these flows, these calculations become very expensive with increasing facility size and therefore have to be carefully constructed to ensure sufficient accuracy is achieved within feasible computational times. This study examines modelling strategies for a Mach 10 scramjet test condition developed for The University of Queensland's X3 facility. The present paper outlines the challenges associated with test flow reconstruction, describes the experimental set-up for the X3 experiments, and then details the development of an experimentally tuned quasi-one-dimensional CFD model of the full facility. The 1-D model, which accurately captures longitudinal wave processes, is used to calculate the transient flow history in the shock tube. This becomes the inflow to a higher-fidelity 2-D axisymmetric simulation of the downstream facility, detailed in the Part 2 companion paper, leading to a validated, fully defined nozzle exit test flow.

Testing can counteract proactive interference by integrating competing information.

PubMed

Wahlheim, Christopher N

2015-01-01

Testing initially learned information before presenting new information has been shown to counteract the deleterious effects of proactive interference by segregating competing sources of information. The present experiments were conducted to demonstrate that testing can also have its effects in part by integrating competing information. Variations of classic A-B, A-D paired-associate learning paradigms were employed that included two lists of word pairs and a cued-recall test. Repeated pairs appeared in both lists (A-B, A-B), control pairs appeared in List 2 only (A-B, C-D), and changed pairs appeared with the same cue in both lists but with different responses (A-B, A-D). The critical manipulation was whether pairs were tested or restudied in an interpolated phase that occurred between Lists 1 and 2. On a final cued-recall test, participants recalled List 2 responses and then indicated when they recollected that responses had earlier changed between lists. The change recollection measure indexed the extent to which competing responses were integrated during List 2. Change was recollected more often for tested than for restudied pairs. Proactive facilitation was obtained in cued recall when change was recollected, whereas proactive interference was obtained when change was not recollected. These results provide evidence that testing counteracted proactive interference in part by making List 1 responses more accessible during List 2, thus promoting integration and increasing later recollection of change. These results have theoretical implications because they show that testing can counteract proactive interference by integrating or segregating competing information.

New possibilities using additive manufacturing with materials that are difficult to process and with complex structures

NASA Astrophysics Data System (ADS)

Olsson, Anders; Hellsing, Maja S.; Rennie, Adrian R.

2017-05-01

Additive manufacturing (or 3D printing) opens the possibility of creating new designs and manufacturing objects with new materials rapidly and economically. Particularly for use with polymers and polymer composites, simple printers can make high quality products, and these can be produced easily in offices, schools and in workshops and laboratories. This technology has opened a route for many to test ideas or to make custom devices. It is possible to easily manufacture complex geometries that would be difficult or even impossible to create with traditional methods. Naturally this technology has attracted attention in many fields that include the production of medical devices and prostheses, mechanical engineering as well as basic sciences. Materials that are highly problematic to machine can be used. We illustrate process developments with an account of the production of printer parts to cope with polymer fillers that are hard and abrasive; new nozzles with ruby inserts designed for such materials are durable and can be used to print boron carbide composites. As with other materials, complex parts can be printed using boron carbide composites with fine structures, such as screw threads and labels to identify materials. General ideas about design for this new era of manufacturing customised parts are presented.

Metal Matrix Composite LOX Turbopump Housing Via Novel Tool-Less Net-Shape Pressure Infiltration Casting Technology

NASA Technical Reports Server (NTRS)

Shah, Sandeep; Lee, Jonathan; Bhat, Biliyar; Wells, Doug; Gregg, Wayne; Marsh, Matthew; Genge, Gary; Forbes, John; Salvi, Alex; Cornie, James A.;

Metal Matrix Composite LOX Turbopump Housing Via Novel Tool-Less Net-Shape Pressure Infiltration Casting Technology

NASA Technical Reports Server (NTRS)

Shah, Sandeep; Lee, Jonathan; Bhat, Biliyar; Wells, Doug; Gregg, Wayne; Marsh, Matthew; Genge, Gary; Forbes, John; Salvi, Alex; Cornie, James A.;

Metal Matrix Composite LOX Turbopump Housing Via Novel Tool-less Net-Shape Pressure Infiltration Casting Technology

NASA Technical Reports Server (NTRS)

Shah, Sandeep; Lee, Jonathan; Bhat, Biliyar; Wells, Doug; Gregg, Wayne; Marsh, Matthew; Genge, Gary; Forbes, John; Salvi, Alex; Cornie, James A.;

Trends in computer applications in science assessment

NASA Astrophysics Data System (ADS)

Kumar, David D.; Helgeson, Stanley L.

1995-03-01

Seven computer applications to science assessment are reviewed. Conventional test administration includes record keeping, grading, and managing test banks. Multiple-choice testing involves forced selection of an answer from a menu, whereas constructed-response testing involves options for students to present their answers within a set standard deviation. Adaptive testing attempts to individualize the test to minimize the number of items and time needed to assess a student's knowledge. Figurai response testing assesses science proficiency in pictorial or graphic mode and requires the student to construct a mental image rather than selecting a response from a multiple choice menu. Simulations have been found useful for performance assessment on a large-scale basis in part because they make it possible to independently specify different aspects of a real experiment. An emerging approach to performance assessment is solution pathway analysis, which permits the analysis of the steps a student takes in solving a problem. Virtually all computer-based testing systems improve the quality and efficiency of record keeping and data analysis.

The students' ability in the mathematical literacy for uncertainty problems on the PISA adaptation test

NASA Astrophysics Data System (ADS)

Julie, Hongki; Sanjaya, Febi; Anggoro, Ant. Yudhi

2017-08-01

One of purposes of this study was to describe the solution profile of the junior high school students for the PISA adaptation test. The procedures conducted by researchers to achieve this objective were (1) adapting the PISA test, (2) validating the adapting PISA test, (3) asking junior high school students to do the adapting PISA test, and (4) making the students' solution profile. The PISA problems for mathematics could be classified into four areas, namely quantity, space and shape, change and relationship, and uncertainty. The research results that would be presented in this paper were the result test for uncertainty problems. In the adapting PISA test, there were fifteen questions. Subjects in this study were 18 students from 11 junior high schools in Yogyakarta, Central Java, and Banten. The type of research that used by the researchers was a qualitative research. For the first uncertainty problem in the adapting test, 66.67% of students reached level 3. For the second uncertainty problem in the adapting test, 44.44% of students achieved level 4, and 33.33% of students reached level 3. For the third uncertainty problem in the adapting test n, 38.89% of students achieved level 5, 11.11% of students reached level 4, and 5.56% of students achieved level 3. For the part a of the fourth uncertainty problem in the adapting test, 72.22% of students reached level 4 and for the part b of the fourth uncertainty problem in the adapting test, 83.33% students achieved level 4.

Hexavalent Chromium IV-Free Primer Development

NASA Technical Reports Server (NTRS)

Alldredge, Michael J.; Buck, Amy L.

2015-01-01

Primer materials provide corrosion protection for metal parts as well as an increased adhesion between metallic substrates and thermal protection systems (TPSs). Current primers for use in cryogenic applications contain hexavalent chromium. This hexavalent chromium provides excellent corrosion protection even in a cryogenic environment, but it is a carcinogen that requires special equipment and waste control procedures to use. The hazardous nature of hexavalent chromium makes it an obsolescence risk in the future. This study included two phases of evaluation. Thirteen primers were initially identified as candidates and twelve of those primers were tested in phase 1. Four of the best performing candidates from phase 1 continued into phase 2 testing. Phase 1 testing consisted mostly of liquid constituent and physical property testing. Cryoflex and salt fog testing were included in phase 1 because of their importance to the overall success of a candidate material. Phase 2 consisted of physical, thermal, and mechanical properties for nominally processed and fabricated specimens.

Interleukin-6 and C-Reactive Protein Levels and 9-Year Cognitive Decline in Community-Dwelling Older Women: The Women's Health and Aging Study II.

PubMed

Palta, Priya; Xue, Qian-Li; Deal, Jennifer A; Fried, Linda P; Walston, Jeremy D; Carlson, Michelle C

2015-07-01

Elevated inflammation is a proposed mechanism relating chronic diseases to cognitive dysfunction. The objective of this study was to test the hypothesis that greater levels of inflammation, as measured by the proinflammatory cytokine interleukin-6 (IL-6) and C-reactive protein, are associated with faster rates of cognitive decline among cognitively intact community-dwelling older women. We analyzed 336 women from the Women's Health and Aging Study II. Cognitive assessments were performed at baseline and every 18-36 months, and included the following domains: immediate and delayed memory (Hopkins Verbal Learning Test), psychomotor speed (Trail Making Test, Part A), and executive function (Trail Making Test, Part B). Aggregate measures of IL-6 and C-reactive protein, based on the average from visits one and two, were analyzed categorically. Random effects models were employed to test the relationship between tertiles of each inflammatory marker and changes in cognitive domain scores over 9 years. Moderate and high levels of IL-6 predicted early declines in psychomotor speed by 1.0 connection/min per year. There were no differences in baseline scores or rates of change across tertiles of IL-6 in memory or executive function. No differences were observed across tertiles of C-reactive protein for all cognitive domains. Higher levels of serum IL-6 were associated with greater declines in psychomotor speed over 9 years. This finding could suggest that elevated IL-6 may result in microvascular changes that may lead to damage of myelin sheaths that line neuronal axons, leading to decreased neuron propagation and impaired processing speed; however, mechanistic studies are needed to evaluate these hypotheses. © The Author 2014. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Improving the Quality of Hot Stamping Parts with Innovative Press Technology and Inline Process Control

NASA Astrophysics Data System (ADS)

Vollmer, R.; Palm, C.

2017-09-01

The increasing number of hot stamped parts in the automotive industry is challenging different process areas. This paper presents a method how to improve the production rates over the whole life cycle of a hot forming part. In the core element of a hot forming line, the hydraulic press, mainly two processing steps are performed. Forming and quenching of the sheet metal part. In addition to the forming operation, it is inevitable to optimize the quenching condition in the bottom dead centre in order to reach a fully martensitic structure and tight geometrical tolerances of the part. Deviations in the blank thickness, tool wear, polishing of classical tools impair the quenching condition and therefore the part quality over the time. A new press and tool design has been developed to counter this effect by providing homogenous contact pressure over the whole die. Especially with a multi cavity tool, the new method is advantageous. Test series have shown that the new tool and press concept can produce parts with a blank thickness of 1.0 mm within 8.0 s cycle time. The so called PCH flex principle makes it possible to produce such high output rates under reliable conditions.

Design an optimum safety policy for personnel safety management - A system dynamic approach

NASA Astrophysics Data System (ADS)

Balaji, P.

2014-10-01

Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamics model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making.

Making Professional Development Schools Work: Politics, Practice, and Policy. The Series on School Reform.

ERIC Educational Resources Information Center

Levine, Marsha, Ed.; Trachtman, Roberta, Ed.

The 11 chapters in this book are organized into 3 parts. "Part 1: Making Changes at the Core" contains five chapters: (1) "Learning To Teach in Professional Development Schools" (Kenneth Zeichner and Maurine Miller); (2) "'Making It Happen': Creating a Subculture of Mentoring in a Professional Development School"…

CONSIDERATION ON THE WEAKENING PHENOMENON OF FILAMENT USED FOR ELECTRIC LAMPS BY P-32 TRACER TECHNIQUE (in Japanese)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ozasa, M.; Ichikawa, S.; Kohara, R.

1963-01-01

The filament of high-wattage electric lamps using red phosphorus as getter has a tendency to down at the end parts. According to the metallurgical study, the phenomenon seems to be caused by phosphorus. Hence an attempt was made to trace the behavior of a smail amount of phosphorus on the filament with the aid of radioactive red phosphorus, P/sup 32/, in order to make clear the role of phosphorus in the weakening phenomenon by comparing the results with the metallurgical observation. Radioactive red phosphorus obtained as an irradiated unit was refined chemically, powdered, and spread on the filaments in themore » form of an alcoholic suspension. The test lamps using these filaments were raade and then running tests were carried out under several conditions. After running tests the filaments were taken out and the phosphorus remaining on the fllaments was determined by beta counting. The distribution of phosphorus on the filaments was observed by autoradiography. Before running tests, 247 plus or minus 57 mu g of phosphorus existed over a whole filament, although its distribution was not necessarily uniform. Most of the phosphorus vaporized from the filament during the running test. However, 0.05 to 0.5 mu g of phosphorus remained at the end parts of the filament even after 600 min of running time. The remaining phosphorus is due to the temperature of the end parts of the filament, which is about 1000 deg C lower than that of the central part (about 2500 deg C). In addition, it was confirmed by microautoradiography that phosphorus diffused into the filament at those parts. According to the metallurgical study, reductive non- metallic elements such as phosphorus affect the recrystallization of tungsten crystals by reducing the doping materials. From the microphotographic observation of those parts, it was found that the fiber structure changed completely to the block structure after running, which fact causes the filament to weaken. Further experimental results show that such a structure appears at a temperature higher than 1200 deg C when the filament contacts with phosphorus. It is thus presumed that the weakening phenomenon at the end parts of the filament will be caused by phosphorus remaining at those parts. Therefore, when phosphorus is spread only near the central part of the filament, where the temperature is high enough to vaporize phosphorus rapidly, phosphorus was not found anywhere on the filament after running, and the change of crystal structure was not recognized. (JAIF)« less

Low Cost Injection Mold Creation via Hybrid Additive and Conventional Manufacturing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dehoff, Ryan R.; Watkins, Thomas R.; List, III, Frederick Alyious

2015-12-01

The purpose of the proposed project between Cummins and ORNL is to significantly reduce the cost of the tooling (machining and materials) required to create injection molds to make plastic components. Presently, the high cost of this tooling forces the design decision to make cast aluminum parts because Cummins typical production volumes are too low to allow injection molded plastic parts to be cost effective with the amortized cost of the injection molding tooling. In addition to reducing the weight of components, polymer injection molding allows the opportunity for the alternative cooling methods, via nitrogen gas. Nitrogen gas cooling offersmore » an environmentally and economically attractive cooling option, if the mold can be manufactured economically. In this project, a current injection molding design was optimized for cooling using nitrogen gas. The various components of the injection mold tooling were fabricated using the Renishaw powder bed laser additive manufacturing technology. Subsequent machining was performed on the as deposited components to form a working assembly. The injection mold is scheduled to be tested in a projection setting at a commercial vendor selected by Cummins.« less

Three-dimensional Boltzmann-Hydro Code for Core-collapse in Massive Stars. II. The Implementation of Moving-mesh for Neutron Star Kicks

NASA Astrophysics Data System (ADS)

Nagakura, Hiroki; Iwakami, Wakana; Furusawa, Shun; Sumiyoshi, Kohsuke; Yamada, Shoichi; Matsufuru, Hideo; Imakura, Akira

2017-04-01

We present a newly developed moving-mesh technique for the multi-dimensional Boltzmann-Hydro code for the simulation of core-collapse supernovae (CCSNe). What makes this technique different from others is the fact that it treats not only hydrodynamics but also neutrino transfer in the language of the 3 + 1 formalism of general relativity (GR), making use of the shift vector to specify the time evolution of the coordinate system. This means that the transport part of our code is essentially general relativistic, although in this paper it is applied only to the moving curvilinear coordinates in the flat Minknowski spacetime, since the gravity part is still Newtonian. The numerical aspect of the implementation is also described in detail. Employing the axisymmetric two-dimensional version of the code, we conduct two test computations: oscillations and runaways of proto-neutron star (PNS). We show that our new method works fine, tracking the motions of PNS correctly. We believe that this is a major advancement toward the realistic simulation of CCSNe.

Static and dynamic characterization of alluvial deposits in the Tiber River Valley: New data for assessing potential ground motion in the City of Rome

NASA Astrophysics Data System (ADS)

Bozzano, F.; Caserta, A.; Govoni, A.; Marra, F.; Martino, S.

2008-01-01

The paper presents the results of a case study conducted on the Holocene alluvial deposits of the Tiber River valley, in the city of Rome. The main test site selected for the study, Valco S. Paolo, is located about 2 km South of Rome's historical centre. The alluvial deposits were dynamically characterized in a comprehensive way via site investigations and geotechnical laboratory tests. Normalized shear modulus decay and damping curves (G/G0 and D/D0 vs γ) were obtained for the dominantly fine-grained levels. The curves demonstrate that these levels have a more marked shear stiffness decay if compared with the underlying Pliocene bedrock. Decay curves from laboratory tests for the Tiber alluvia correlated well with the trend of the function proposed by Hardin and Drnevich, making it possible to derive their specific interpolation function coefficients. Use was made of the extrapolation of the findings from the Valco S. Paolo test site to a large part of Rome's historical centre by means of two other test sites, supported by an engineering-geology model of the complex spatial distribution of the Tiber alluvia. The experimental Valco S. Paolo Vs profile was extrapolated to the other test sites on the basis of a stratigraphic criterion; the analysis of seismic noise measurements, obtained for the three test sites, validated the engineering-geology based extrapolation and showed that the main rigidity contrast occurs inside the alluvial body (at the contact with the underlying basal gravel-level G) and not between the alluvia and the Plio-Pleistocene bedrock, composed of highly consistent clay (Marne Vaticane). The 1D modeling of local seismic response to the maximum expected earthquakes in the city of Rome confirms that the deposits have one principal mode of vibration at about 1 Hz. However, the simulation also evidenced that the silty-clay deposits (level C), making up the most part of the Tiber alluvial body, play a key role in characterizing the soil column deformation profile since it can be affected by non linear effects induced by the maximum expected earthquake when some stratigraphic conditions are satisfied.

Are quantitative cultures useful in the diagnosis of hospital-acquired pneumonia?

PubMed

San Pedro, G

2001-02-01

Noninvasive and invasive tests have been developed and studied for their utility in diagnosing and guiding the treatment of hospital-acquired pneumonia, a condition with an inherently high mortality. Early empiric antibiotic treatment has been shown to reduce mortality, so delaying this treatment until test results are available is not justifiable. Furthermore, tailoring therapy based on results of either noninvasive or invasive tests has not been clearly shown to affect morbidity and mortality. This may be related to quantitative limitations of these tests or possibly to a high false-negative rate in patients who receive early antibiotic treatment and may therefore have suppressed bacterial counts. Results of these tests, however, do influence treatment. It is therefore hoped that they may ultimately provide a rational basis for making therapeutic decisions. In the future, outcomes research should be a part of large-scale clinical trials, and noninvasive and invasive tests should be incorporated into the design in an attempt to provide a better understanding of the value of such tests.

Parametric Modeling for Fluid Systems

NASA Technical Reports Server (NTRS)

Pizarro, Yaritzmar Rosario; Martinez, Jonathan

2013-01-01

Fluid Systems involves different projects that require parametric modeling, which is a model that maintains consistent relationships between elements as is manipulated. One of these projects is the Neo Liquid Propellant Testbed, which is part of Rocket U. As part of Rocket U (Rocket University), engineers at NASA's Kennedy Space Center in Florida have the opportunity to develop critical flight skills as they design, build and launch high-powered rockets. To build the Neo testbed; hardware from the Space Shuttle Program was repurposed. Modeling for Neo, included: fittings, valves, frames and tubing, between others. These models help in the review process, to make sure regulations are being followed. Another fluid systems project that required modeling is Plant Habitat's TCUI test project. Plant Habitat is a plan to develop a large growth chamber to learn the effects of long-duration microgravity exposure to plants in space. Work for this project included the design and modeling of a duct vent for flow test. Parametric Modeling for these projects was done using Creo Parametric 2.0.

Credit BG. The north and west sides of this structure ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Credit BG. The north and west sides of this structure appear as seen when looking east (88°). Building E-67, the tunnel entrance, gives personnel access to the tunnel system. The Assembly Building served as a shop for test crews; it contained a small lathe and other tools for making specialized parts. No explosives were allowed in this structure. Air conditioning ducts are on the roof - Jet Propulsion Laboratory Edwards Facility, Assembly Building, Edwards Air Force Base, Boron, Kern County, CA

The development and validation of the clinicians' awareness towards cognitive errors (CATChES) in clinical decision making questionnaire tool.

PubMed

Chew, Keng Sheng; Kueh, Yee Cheng; Abdul Aziz, Adlihafizi

2017-03-21

Despite their importance on diagnostic accuracy, there is a paucity of literature on questionnaire tools to assess clinicians' awareness toward cognitive errors. A validation study was conducted to develop a questionnaire tool to evaluate the Clinician's Awareness Towards Cognitive Errors (CATChES) in clinical decision making. This questionnaire is divided into two parts. Part A is to evaluate the clinicians' awareness towards cognitive errors in clinical decision making while Part B is to evaluate their perception towards specific cognitive errors. Content validation for both parts was first determined followed by construct validation for Part A. Construct validation for Part B was not determined as the responses were set in a dichotomous format. For content validation, all items in both Part A and Part B were rated as "excellent" in terms of their relevance in clinical settings. For construct validation using exploratory factor analysis (EFA) for Part A, a two-factor model with total variance extraction of 60% was determined. Two items were deleted. Then, the EFA was repeated showing that all factor loadings are above the cut-off value of >0.5. The Cronbach's alpha for both factors are above 0.6. The CATChES questionnaire tool is a valid questionnaire tool aimed to evaluate the awareness among clinicians toward cognitive errors in clinical decision making.

[ISO 15189, Up-To-Date Information and Prospective View].

PubMed

Shimoda, Katsuji

2016-02-01

"Accreditation Activities for Medical Laboratories in Japan" Audits for transition to ISO 15189:2012 continue to progress. Besides the continual increase of accreditations for medical laboratory testing and pathological examinations, preparations for the addition of physiological testing to the scope of accreditation have finally been completed. As a part of the revision to Japan's Medical Service Act, the external evaluation of medical laboratories is now a requirement to approve clinical trial core hospitals. Accordingly, the importance of third-party accreditation in medical laboratory testing is attracting a growing level of attention. World Accreditation Day 2015 "Accreditation: Supporting the Delivery of Health and Social Care" JAB is being used to make every effort to contribute to this system in order to improve the quality of healthcare in Japan and the health of its citizens.

Material-specific difficulties in episodic memory tasks in mild traumatic brain injury.

PubMed

Tsirka, Vassiliki; Simos, Panagiotis; Vakis, Antonios; Vourkas, Michael; Arzoglou, Vasileios; Syrmos, Nikolaos; Stavropoulos, Stavros; Micheloyannis, Sifis

2010-03-01

The study examines acute, material-specific secondary memory performance in 26 patients with mild traumatic brain injury (MTBI) and 26 healthy controls, matched on demographic variables and indexes of crystallized intelligence. Neuropsychological tests were used to evaluate primary and secondary memory, executive functions, and verbal fluency. Participants were also tested on episodic memory tasks involving words, pseudowords, pictures of common objects, and abstract kaleidoscopic images. Patients showed reduced performance on episodic memory measures, and on tasks associated with visuospatial processing and executive function (Trail Making Test part B, semantic fluency). Significant differences between groups were also noted for correct rejections and response bias on the kaleidoscope task. MTBI patients' reduced performance on memory tasks for complex, abstract stimuli can be attributed to a dysfunction in the strategic component of memory process.

Invited Commentary: Can Issues With Reproducibility in Science Be Blamed on Hypothesis Testing?

PubMed Central

Weinberg, Clarice R.

2017-01-01

Abstract In the accompanying article (Am J Epidemiol. 2017;186(6):646–647), Dr. Timothy Lash makes a forceful case that the problems with reproducibility in science stem from our “culture” of null hypothesis significance testing. He notes that when attention is selectively given to statistically significant findings, the estimated effects will be systematically biased away from the null. Here I revisit the recent history of genetic epidemiology and argue for retaining statistical testing as an important part of the tool kit. Particularly when many factors are considered in an agnostic way, in what Lash calls “innovative” research, investigators need a selection strategy to identify which findings are most likely to be genuine, and hence worthy of further study. PMID:28938713

Genetic screening and testing in an episode-based payment model: preserving patient autonomy.

PubMed

Sutherland, Sharon; Farrell, Ruth M; Lockwood, Charles

2014-11-01

The State of Ohio is implementing an episode-based payment model for perinatal care. All costs of care will be tabulated for each live birth and assigned to the delivering provider, creating a three-tiered model for reimbursement for care. Providers will be reimbursed as usual for care that is average in cost and quality, while instituting rewards or penalties for those outside the expected range in either domain. There are few exclusions, and all methods of genetic screening and diagnostic testing are included in the episode cost calculation as proposed. Prenatal ultrasonography, genetic screening, and diagnostic testing are critical components of the delivery of high-quality, evidence-based prenatal care. These tests provide pregnant women with key information about the pregnancy, which, in turn, allows them to work closely with their health care provider to determine optimal prenatal care. The concepts of informed consent and decision-making, cornerstones of the ethical practice of medicine, are founded on the principles of autonomy and respect for persons. These principles recognize that patients' rights to make choices and take actions are based on their personal beliefs and values. Given the personal nature of such decisions, it is critical that patients have unbarred access to prenatal genetic tests if they elect to use them as part of their prenatal care. The proposed restructuring of reimbursement creates a clear conflict between patient autonomy and physician financial incentives.

The amygdala and decision-making.

PubMed

Gupta, Rupa; Koscik, Timothy R; Bechara, Antoine; Tranel, Daniel

2011-03-01

Decision-making is a complex process that requires the orchestration of multiple neural systems. For example, decision-making is believed to involve areas of the brain involved in emotion (e.g., amygdala, ventromedial prefrontal cortex) and memory (e.g., hippocampus, dorsolateral prefrontal cortex). In this article, we will present findings related to the amygdala's role in decision-making, and differentiate the contributions of the amygdala from those of other structurally and functionally connected neural regions. Decades of research have shown that the amygdala is involved in associating a stimulus with its emotional value. This tradition has been extended in newer work, which has shown that the amygdala is especially important for decision-making, by triggering autonomic responses to emotional stimuli, including monetary reward and punishment. Patients with amygdala damage lack these autonomic responses to reward and punishment, and consequently, cannot utilize "somatic marker" type cues to guide future decision-making. Studies using laboratory decision-making tests have found deficient decision-making in patients with bilateral amygdala damage, which resembles their real-world difficulties with decision-making. Additionally, we have found evidence for an interaction between sex and laterality of amygdala functioning, such that unilateral damage to the right amygdala results in greater deficits in decision-making and social behavior in men, while left amygdala damage seems to be more detrimental for women. We have posited that the amygdala is part of an "impulsive," habit type system that triggers emotional responses to immediate outcomes. Copyright © 2010 Elsevier Ltd. All rights reserved.

KSC-2011-1201

NASA Image and Video Library

2011-01-25

CAPE CANAVERAL, Fla. -- Space shuttle Atlantis goes through a routine landing gear test in Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida. Technicians are checking to make sure the shuttle's wheels, brakes, elevons and body flap function properly. Seen here, an elevon is tested. Elevons are located on the trailing edge of each wing and help control pitch of the shuttle as it comes in for landing. Atlantis is being prepared for the STS-135 mission, which will deliver the Raffaello multi-purpose logistics module packed with supplies, logistics and spare parts to the International Space Station. STS-135 is targeted to launch June 28, and will be the last spaceflight for the Space Shuttle Program. Photo credit: NASA/Jack Pfaller

KSC-2011-1202

NASA Image and Video Library

2011-01-25

CAPE CANAVERAL, Fla. -- Space shuttle Atlantis goes through a routine landing gear test in Orbiter Processing Facility-1 at NASA's Kennedy Space Center in Florida. Technicians are checking to make sure the shuttle's wheels, brakes, elevons and body flap function properly. Seen here, an elevon is tested. Elevons are located on the trailing edge of each wing and help control pitch of the shuttle as it comes in for landing. Atlantis is being prepared for the STS-135 mission, which will deliver the Raffaello multi-purpose logistics module packed with supplies, logistics and spare parts to the International Space Station. STS-135 is targeted to launch June 28, and will be the last spaceflight for the Space Shuttle Program. Photo credit: NASA/Jack Pfaller

The new postirradiation examination facility of the Atomic Energy Corporation of South Africa

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walt, P.L. van der; Aspeling, J.C.; Jonker, W.D.

1992-01-01

The Pelindaba Hot Cell Complex (HCC) forms an important part of the infrastructure and support services of the Atomic Energy Corporation (AEC) of South Africa. It is a comprehensive, one-stop facility designed to make South Africa self-sufficient in the fields of spent-fuel qualification and verification, reactor pressure vessel surveillance program testing, ad hoc failure analyses for the nuclear power industry, and research and development studies in conjunction with the Safari I material test reactor (MTR) and irradiation rigs. Local technology and expertise was used for the design and construction of the HCC, which start up in 1980. The facility wasmore » commissioned in 1990.« less

40 CFR 85.2115 - Notification of intent to certify.

Code of Federal Regulations, 2010 CFR

2010-07-01

... which the part is being certified including make(s), model(s), year(s), engine size(s) and all other... submitted by the aftermarket manufacturer to: Mod Director, MOD (EN-340F), Attention: Aftermarket Parts, 401...

Attrition from Web-Based Cognitive Testing: A Repeated Measures Comparison of Gamification Techniques

PubMed Central

Skinner, Andy; Coyle, David; Lawrence, Natalia; Munafo, Marcus

2017-01-01

Background The prospect of assessing cognition longitudinally and remotely is attractive to researchers, health practitioners, and pharmaceutical companies alike. However, such repeated testing regimes place a considerable burden on participants, and with cognitive tasks typically being regarded as effortful and unengaging, these studies may experience high levels of participant attrition. One potential solution is to gamify these tasks to make them more engaging: increasing participant willingness to take part and reducing attrition. However, such an approach must balance task validity with the introduction of entertaining gamelike elements. Objective This study aims to investigate the effects of gamelike features on participant attrition using a between-subjects, longitudinal Web-based testing study. Methods We used three variants of a common cognitive task, the Stop Signal Task (SST), with a single gamelike feature in each: one variant where points were rewarded for performing optimally; another where the task was given a graphical theme; and a third variant, which was a standard SST and served as a control condition. Participants completed four compulsory test sessions over 4 consecutive days before entering a 6-day voluntary testing period where they faced a daily decision to either drop out or continue taking part. Participants were paid for each session they completed. Results A total of 482 participants signed up to take part in the study, with 265 completing the requisite four consecutive test sessions. No evidence of an effect of gamification on attrition was observed. A log-rank test showed no evidence of a difference in dropout rates between task variants (χ22=3.0, P=.22), and a one-way analysis of variance of the mean number of sessions completed per participant in each variant also showed no evidence of a difference (F2,262=1.534, P=.21, partial η2=0.012). Conclusions Our findings raise doubts about the ability of gamification to reduce attrition from longitudinal cognitive testing studies. PMID:29167090

Testing can counteract proactive interference by integrating competing information

PubMed Central

Wahlheim, Christopher N.

2015-01-01

Testing initially learned information before presenting new information has been shown to counteract the deleterious effects of proactive interference by segregating competing sources of information. The present experiments were conducted to demonstrate that testing can also have its effects in part by integrating competing information. Variations of classic A–B, A–D paired-associate learning paradigms were employed that included two lists of word pairs and a cued-recall test. Repeated pairs appeared in both lists (A–B, A–B), control pairs appeared in List 2 only (A–B, C–D), and changed pairs appeared with the same cue in both lists but with different responses (A–B, A–D). The critical manipulation was whether pairs were tested or restudied in an interpolated phase that occurred between Lists 1 and 2. On a final cued-recall test, participants recalled List 2 responses and then indicated when they recollected that responses had earlier changed between lists. The change recollection measure indexed the extent to which competing responses were integrated during List 2. Change was recollected more often for tested than for restudied pairs. Proactive facilitation was obtained in cued recall when change was recollected, whereas proactive interference was obtained when change was not recollected. These results provide evidence that testing counteracted proactive interference in part by making List 1 responses more accessible during List 2, thus promoting integration and increasing later recollection of change. These results have theoretical implications because they show that testing can counteract proactive interference by integrating or segregating competing information. PMID:25120241

Prefrontal cortex damage abolishes brand-cued changes in cola preference.

PubMed

Koenigs, Michael; Tranel, Daniel

2008-03-01

Human decision-making is remarkably susceptible to commercial advertising, yet the neurobiological basis of this phenomenon remains largely unexplored. With a series of Coke and Pepsi taste tests we show that patients with damage specifically involving ventromedial prefrontal cortex (VMPC), an area important for emotion, did not demonstrate the normal preference bias when exposed to brand information. Both comparison groups (neurologically normal adults and lesion patients with intact VMPC) preferred Pepsi in a blind taste test, but in subsequent taste tests that featured brand information ('semi-blind' taste tests), both comparison groups' preferences were skewed toward Coke, illustrating the so-called 'Pepsi paradox'. Like comparison groups, the VMPC patients preferred Pepsi in the blind taste test, but unlike comparison groups, the VMPC patients maintained their Pepsi preference in the semi-blind test. The result that VMPC damage abolishes the 'Pepsi paradox' suggests that the VMPC is an important part of the neural substrate for translating commercial images into brand preferences.

Subsurface temperature data in Jemez Mountains, New Mexico. Circular 151

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reiter, M.; Weidman, C.; Edwards, C.L.

1976-01-01

Temperature data taken in 13 drill tests around the Valles Caldera are presented. Seven of these tests were shallow auger holes (less than approximately 30m), 4 were rotary holes of intermediate depth (140 m to 170 m), and 2 were relatively deep tests (350 m and 730 m). Heat-flow measurements were obtained in the 4 intermediate drill tests whereas only geothermal gradients were measured in the remaining tests. Potential ground-water movement, lack of good thermal conductivity control, and the shallow depth of many of the drill tests makes the heat-flow pattern in the area uncertain. Two trends appear likely: highermore » heat flows are to the western side of the Valles Caldera (as opposed to the eastern side) and heat flows increase rapidly in approaching the margin of the Valles Caldera from the west. Both observations suggest a relatively shallow heat source located beneath the western part of the Valles Caldera.« less

Managing Science Operations During Planetary Surface: The 2010 Desert RATS Test

NASA Technical Reports Server (NTRS)

Eppler, Dean B.; Ming, D. W.

2011-01-01

Desert Research and Technology Studies (Desert RATS) is a multi-year series of hardware and operations tests carried out annually in the high desert of Arizona on the San Francisco Volcanic Field. Conducted since 1997, these activities are designed to exercise planetary surface hardware and operations in conditions where long-distance, multi-day roving is achievable. Such activities not only test vehicle subsystems through extended rough-terrain driving, they also stress communications and operations systems and allow testing of science operations approaches to advance human and robotic surface capabilities. Desert RATS is a venue where new ideas can be tested, both individually and as part of an operation with multiple elements. By conducting operations over multiple yearly cycles, ideas that make the cut can be iterated and tested during follow-on years. This ultimately gives both the hardware and the personnel experience in the kind of multi-element integrated operations that will be necessary in future human planetary exploration.

Prefrontal cortex damage abolishes brand-cued changes in cola preference

PubMed Central

Tranel, Daniel

2008-01-01

Human decision-making is remarkably susceptible to commercial advertising, yet the neurobiological basis of this phenomenon remains largely unexplored. With a series of Coke and Pepsi taste tests we show that patients with damage specifically involving ventromedial prefrontal cortex (VMPC), an area important for emotion, did not demonstrate the normal preference bias when exposed to brand information. Both comparison groups (neurologically normal adults and lesion patients with intact VMPC) preferred Pepsi in a blind taste test, but in subsequent taste tests that featured brand information (‘semi-blind’ taste tests), both comparison groups’ preferences were skewed toward Coke, illustrating the so-called ‘Pepsi paradox’. Like comparison groups, the VMPC patients preferred Pepsi in the blind taste test, but unlike comparison groups, the VMPC patients maintained their Pepsi preference in the semi-blind test. The result that VMPC damage abolishes the ‘Pepsi paradox’ suggests that the VMPC is an important part of the neural substrate for translating commercial images into brand preferences. PMID:18392113

Unified Tri-service Cognitive Performance Assessment Battery (UTC-PAB). Part 1: Design and specification of the battery

NASA Astrophysics Data System (ADS)

Englund, C. E.; Reeves, D. L.; Shingledecker, C. A.; Thorne, D. R.; Wilson, K. P.

1987-02-01

The Unified Tri-Service Cognitive Performance Assessment Battery (UTC-PAB) represents the primary metric for a Level 2 evaluation of cognitive performance in the JWGD3 MILPERF chemical defense biomedical drug screening program. Emphasis for UTC-PAB development has been on the standardization of test batteries across participating laboratories with respect to content, computer-based administration, test scoring, and data formatting. This effort has produced a 25-test UTC-PAB that represents the consolidation and unification of independent developments by the Tri-service membership. Test selection was based on established test validity and relevance of military performance. Sensitivity to effects of hostile environments and sustained operations were also considerations involved in test selection. Information processing, decision making, perception, and mental workload capacity are among the processes and abilities addressed in the battery. The UTC-PAB represents a dynamic approach to battery development. The nature of the biomedical drugs screened and information from performance centered task analyses will direct the form of future versions of the battery.

Can patients' preferences for involvement in decision-making regarding the use of medicines be predicted?

PubMed

Garfield, S; Smith, F; Francis, S A; Chalmers, C

2007-06-01

The current study aimed to develop a model of patients' preferences for involvement in decision-making concerning the use of medicines for chronic conditions in the UK and test it in a large representative sample of patients with one of two clinical conditions. Following a structured literature review, an instrument was developed which measured the variables that had been identified as predictors of patients' preferences for involvement in decision making in previous research. Five hundred and sixteen patients with rheumatoid arthritis or type 2 diabetes were recruited from outpatient and primary care clinics and asked to complete the instrument. Multivariate analysis revealed that age, social class and clinical condition were associated with preferences for involvement in decision-making concerning the use of medicines for chronic illness but gender, ethnic group, concerns about medicines, beliefs about necessity of medicines, health status, quality of life and time since diagnosis were not. In total, the fitted model explained only 14% of the variance. This study has demonstrated that current research does not provide a basis for predicting patients' preferences for involvement in decision-making. Building concordant relationships may depend on practitioners developing strategies to establish individuals' preferences for involvement in decision-making as part of the ongoing prescriber-patient relationship.

Diagnosing Allergic Contact Dermatitis Through Elimination, Perception, Detection and Deduction.

PubMed

Pongpairoj, Korbkarn; Puangpet, Pailin; Thaiwat, Supitchaya; McFadden, John P

2017-10-01

Several authors have commented upon the skills of detection required in making a diagnosis of allergic contact dermatitis. Here, we emphasise the search for clues in a systematic manner. We describe four stages as part of a systematic method for diagnosing allergic contact dermatitis. Firstly, elimination (or inclusion) of non-allergic diagnoses. Secondly, perception: the pre-patch test diagnosis and the 'three scenarios' principle. Thirdly, detection: optimising the sensitivity of the patch test process. Fourthly, deduction: diagnosing allergic contact dermatitis by associating the dermatitis with the allergen exposure. We further compare and contrast the pre-patch test history and examination with the markedly different one ('microhistory' and 'microexamination') used after patch testing. The importance of knowledge of contact dermatitis literature is emphasised with a review of recent publications. Finally, we also highlight the use of contact allergy profiling as an investigative tool in the diagnosis of allergic contact dermatitis.

Autobiologies on YouTube: Narratives of Direct-to-Consumer Genetic Testing.

PubMed

Harris, Anna; Kelly, Susan E; Wyatt, Sally

2014-03-01

Despite a growing personal genomics market, little is known about how people engage with the possibilities offered by direct-to-consumer (DTC) genetic testing. In order to help address this gap, this study deploys narrative analysis of YouTube videos posted by individuals who have purchased DTC genetic testing for disease. Genetic testing is said to be contributing to new states of illness, where individuals may become "patients-in-waiting." In the videos analyzed, we found a new form of storytelling about this ambiguous state of illness, which we refer to as autobiology. Autobiology - the study of, and story about, one's own biology - concerns narratives of sense-making through forms of biological practice, as well as wayfaring narratives which interweave genetic markers and family histories of disease. These autobiologies - part of a broader shift toward public stories about genetics and other healthcare technologies - exhibit playfulness, as well as being bound with consumerist practices.

Workers in the VAB test SRB cables on STS-98 solid rocket boosters

NASA Technical Reports Server (NTRS)

2001-01-01

KENNEDY SPACE CENTER, Fla. -- Working near the top of a solid rocket booster, NASA and United Space Alliance SRB technicians hook up SRB cables to a CIRRUS computer for testing. From left are Jim Glass, with USA, performing a Flex test on the cable; Steve Swichkow, with NASA, and Jim Silviano, with USA, check the results on a computer. The SRB is part of Space Shuttle Atlantis, rolled back from Launch Pad 39A in order to conduct tests on the cables. A prior extensive evaluation of NASA'''s SRB cable inventory on the shelf revealed conductor damage in four (of about 200) cables. Shuttle managers decided to prove the integrity of the system tunnel cables already on Atlantis before launching. Workers are conducting inspections, making continuity checks and conducting X-ray analysis on the cables. The launch has been rescheduled no earlier than Feb. 6.

Wind-Tunnel Tests on a Series of Wing Models Through a Large Angle of Attack Range. Part I : Force Tests

NASA Technical Reports Server (NTRS)

Knight, Montgomery; Wenzinger, Carl J

1930-01-01

This investigation covers force tests through a large range of angle of attack on a series of monoplane and biplane wing models. The tests were conducted in the atmospheric wind tunnel of the National Advisory Committee for Aeronautics. The models were arranged in such a manner as to make possible a determination of the effects of variations in tip shape, aspect ratio, flap setting, stagger, gap, decalage, sweep back, and airfoil profile. The arrangements represented most of the types of wing systems in use on modern airplanes. The effect of each variable is illustrated by means of groups of curves. In addition, there are included approximate autorotational characteristics in the form of calculated ranges of "rotary instability." a correction for blocking in this tunnel which applies to monoplanes at large angles of attack has been developed, and is given in an appendix. (author)

Comprehensive Trail Making Test Performance in Children and Adolescents with Traumatic Brain Injury

ERIC Educational Resources Information Center

Allen, Daniel N.; Thaler, Nicholas S.; Ringdahl, Erik N.; Barney, Sally J.; Mayfield, Joan

2012-01-01

The sensitivity of the Trail Making Test to brain damage has been well-established over many years, making it one of the most commonly used tests in clinical neuropsychological evaluations. The current study examined the validity of scores from a newer version of the Trail Making Test, the Comprehensive Trail Making Test (CTMT), in children and…

New method of processing heat treatment experiments with numerical simulation support

NASA Astrophysics Data System (ADS)

Kik, T.; Moravec, J.; Novakova, I.

2017-08-01

In this work, benefits of combining modern software for numerical simulations of welding processes with laboratory research was described. Proposed new method of processing heat treatment experiments leading to obtaining relevant input data for numerical simulations of heat treatment of large parts was presented. It is now possible, by using experiments on small tested samples, to simulate cooling conditions comparable with cooling of bigger parts. Results from this method of testing makes current boundary conditions during real cooling process more accurate, but also can be used for improvement of software databases and optimization of a computational models. The point is to precise the computation of temperature fields for large scale hardening parts based on new method of temperature dependence determination of the heat transfer coefficient into hardening media for the particular material, defined maximal thickness of processed part and cooling conditions. In the paper we will also present an example of the comparison standard and modified (according to newly suggested methodology) heat transfer coefficient data’s and theirs influence on the simulation results. It shows how even the small changes influence mainly on distribution of temperature, metallurgical phases, hardness and stresses distribution. By this experiment it is also possible to obtain not only input data and data enabling optimization of computational model but at the same time also verification data. The greatest advantage of described method is independence of used cooling media type.

Properties of Lightning Strike Protection Coatings

NASA Astrophysics Data System (ADS)

Gagne, Martin

Composite materials are being increasingly used by many industries. In the case of aerospace companies, those materials are installed on their aircraft to save weight, and thus, fuel costs. These aircraft are lighter, but the loss of electrical conductivity makes aircraft vulnerable to lightning strikes, which hit commercial aircrafts on average once per year. This makes lightning strike protection very important, and while current metallic expanded copper foils offer good protection, they increase the weight of composites. Therefore, under the CRIAQ COMP-502 project, a team of industrial partners and academic researchers are investigating new conductive coatings with the following characteristics: High electromagnetic protection, high mechanical resistance, good environmental protection, manufacturability and moderate cost. The main objectives of this thesis, as part of this project, was to determine the main characteristics, such as electrical and tribomechanical properties, of conductive coatings on composite panels. Their properties were also to be tested after destructive tests such as current injection and environmental testing. Bombardier Aerospace provided the substrate, a composite of carbon fiber reinforced epoxy matrix, and the current commercial product, a surfacing film that includes an expanded copper foil used to compare with the other coatings. The conductive coatings fabricated by the students are: silver nanoparticles inside a binding matrix (PEDOT:PSS or a mix of Epoxy and PEDOT:PSS), silvered carbon nanofibers embedded in the surfacing film, cold sprayed tin, graphene oxide functionalized with silver nanowires, and electroless plated silver. Additionally as part of the project and thesis, magnetron sputtered aluminum coated samples were fabricated. There are three main types of tests to characterize the conductive coatings: electrical, mechanical and environmental. Electrical tests consist of finding the sheet resistance and specific resistivity of conductive coatings. Mechanical tests include adhesion, scratch, hardness and Young's modulus of the coatings. The environmental tests are temperature cycling and salt spray cycling. These basic characteristics were investigated first, but further tests also combine the categories, such as electrical tests before, during and after environmental tests, and the effects on the sample's mechanical properties after high electrical current injections. The electrical properties of the conductive coatings have improved and are very close to that of current expanded metallic foil or within an order of magnitude. The mechanical properties of most of these coatings are also good. They exhibit good adhesion, hardness, and no significant loss of flexion properties after current injections. The environmental tests are more mitigated, with some conductive coatings losing their surface conductivity, others having a small increase in specific resistivity, and some were simply unaffected. Tests such as thermogravimetric analysis, scanning electron microscope analysis of scratch tests, and optical microscope observations are included to provide additional analysis of the results of the conductive coatings. The conductive coatings were characterized and tested as part of the CRIAQ project. Lightning strike tests are required to gather further information on these conductive coatings. The main application for these coatings is for lightning strike protection of aircraft, but they can also be used for ground based lightning strike protection and general electromagnetic shielding.

Test-retest assessment of functional near-infrared spectroscopy to measure risk decision making in young adults

NASA Astrophysics Data System (ADS)

Li, Lin; Lin, Zijing; Cazzell, Mary; Liu, Hanli

2013-03-01

Investigation of the reliability and reproducibility of the hemodynamic response is important for interpretation and understanding of the results of functional near-infrared spectroscopy (fNIRS). It measures optical signals absorbed by the brain tissue and reflects the neuronal activities indirectly. Here we described an fNIRS study measured in the prefrontal region (Brodman area 9, 10, part of 46)to examine the risk decision-making behavior in nine young adults. The Balloon Analog Risk Task (BART) is widely used to test the level of risk taking ability in the field of psychology. BART was a protocol utilized in this study to evoke a risk-taking environment with a gambling-like balloon game in each subject. Specifically, we recorded the brain oxygenated-hemoglobin (HbO) and deoxygenated-hemoglobin (HHb) changes during the two repeated measurements within a time interval of 3 weeks. The results demonstrate that the changes in HbO2 amplitudes have high reliability at the group level, and that the spatial patterns of the tomographic images have high reproducibility in size and a moderate degree of overlap. Overall, this study confirms that the hemodynamic response to risk decision-making (i.e., BART) seen by fNIRS is highly reliable and reproducible.

Theoferometer for High Accuracy Optical Alignment and Metrology

NASA Technical Reports Server (NTRS)

Toland, Ronald; Leviton, Doug; Koterba, Seth

2004-01-01

The accurate measurement of the orientation of optical parts and systems is a pressing problem for upcoming space missions, such as stellar interferometers, requiring the knowledge and maintenance of positions to the sub-arcsecond level. Theodolites, the devices commonly used to make these measurements, cannot provide the needed level of accuracy. This paper describes the design, construction, and testing of an interferometer system to fill the widening gap between future requirements and current capabilities. A Twyman-Green interferometer mounted on a 2 degree of freedom rotation stage is able to obtain sub-arcsecond, gravity-referenced tilt measurements of a sample alignment cube. Dubbed a 'theoferometer,' this device offers greater ease-of-use, accuracy, and repeatability than conventional methods, making it a suitable 21st-century replacement for the theodolite.

Design Considerations for High Energy Electron -- Positron Storage Rings

DOE R&D Accomplishments Database

Richter, B.

1966-11-01

High energy electron-positron storage rings give a way of making a new attack on the most important problems of elementary particle physics. All of us who have worked in the storage ring field designing, building, or using storage rings know this. The importance of that part of storage ring work concerning tests of quantum electrodynamics and mu meson physics is also generally appreciated by the larger physics community. However, I do not think that most of the physicists working tin the elementary particle physics field realize the importance of the contribution that storage ring experiments can make to our understanding of the strongly interacting particles. I would therefore like to spend the next few minutes discussing the sort of things that one can do with storage rings in the strongly interacting particle field.

Intrinsic Factors Influencing Decision making of Arbitrators in Dispute Resolution of variation Claims

NASA Astrophysics Data System (ADS)

Iyer, K. C.; Chaphalkar, N. B.; Patil, Smita K.

2018-06-01

Occurrence of disputes is a common feature in construction contracts. Adjudication of disputes through the arbitration process involves detailed and through analysis of facts and evidences related to the case before arriving at the final decision. These facts and evidences have been explored by researchers to develop dispute resolution mechanisms. As a part of the research, the present work identifies the factors which influence the decision making of arbitrators in resolving disputes through a case study of 72 arbitration awards and settled court cases related to Indian construction contracts. This work further seeks consensus for the identified factors from experts and also ranks the factors based on their importance with the help of the responses obtained through a questionnaire survey and statistical tests.

Advanced quantitative measurement methodology in physics education research

NASA Astrophysics Data System (ADS)

Wang, Jing

The ultimate goal of physics education research (PER) is to develop a theoretical framework to understand and improve the learning process. In this journey of discovery, assessment serves as our headlamp and alpenstock. It sometimes detects signals in student mental structures, and sometimes presents the difference between expert understanding and novice understanding. Quantitative assessment is an important area in PER. Developing research-based effective assessment instruments and making meaningful inferences based on these instruments have always been important goals of the PER community. Quantitative studies are often conducted to provide bases for test development and result interpretation. Statistics are frequently used in quantitative studies. The selection of statistical methods and interpretation of the results obtained by these methods shall be connected to the education background. In this connecting process, the issues of educational models are often raised. Many widely used statistical methods do not make assumptions on the mental structure of subjects, nor do they provide explanations tailored to the educational audience. There are also other methods that consider the mental structure and are tailored to provide strong connections between statistics and education. These methods often involve model assumption and parameter estimation, and are complicated mathematically. The dissertation provides a practical view of some advanced quantitative assessment methods. The common feature of these methods is that they all make educational/psychological model assumptions beyond the minimum mathematical model. The purpose of the study is to provide a comparison between these advanced methods and the pure mathematical methods. The comparison is based on the performance of the two types of methods under physics education settings. In particular, the comparison uses both physics content assessments and scientific ability assessments. The dissertation includes three parts. The first part involves the comparison between item response theory (IRT) and classical test theory (CTT). The two theories both provide test item statistics for educational inferences and decisions. The two theories are both applied to Force Concept Inventory data obtained from students enrolled in The Ohio State University. Effort was made to examine the similarity and difference between the two theories, and the possible explanation to the difference. The study suggests that item response theory is more sensitive to the context and conceptual features of the test items than classical test theory. The IRT parameters provide a better measure than CTT parameters for the educational audience to investigate item features. The second part of the dissertation is on the measure of association for binary data. In quantitative assessment, binary data is often encountered because of its simplicity. The current popular measures of association fail under some extremely unbalanced conditions. However, the occurrence of these conditions is not rare in educational data. Two popular association measures, the Pearson's correlation and the tetrachoric correlation are examined. A new method, model based association is introduced, and an educational testing constraint is discussed. The existing popular methods are compared with the model based association measure with and without the constraint. Connections between the value of association and the context and conceptual features of questions are discussed in detail. Results show that all the methods have their advantages and disadvantages. Special attention to the test and data conditions is necessary. The last part of the dissertation is focused on exploratory factor analysis (EFA). The theoretical advantages of EFA are discussed. Typical misunderstanding and misusage of EFA are explored. The EFA is performed on Lawson's Classroom Test of Scientific Reasoning (LCTSR), a widely used assessment on scientific reasoning skills. The reasoning ability structures for U.S. and Chinese students at different educational levels are given by the analysis. A final discussion on the advanced quantitative assessment methodology and the pure mathematical methodology is presented at the end.

Characterization and modeling of a highly-oriented thin film for composite forming

NASA Astrophysics Data System (ADS)

White, K. D.; Sherwood, J. A.

2018-05-01

Ultra High Molecular Weight Polyethylene (UHMWPE) materials exhibit high impact strength, excellent abrasion resistance and high chemical resistance, making them attractive for a number of impact applications for automotive, marine and medical industries. One format of this class of materials that is being considered for the thermoforming process is a highly-oriented extruded thin film. Parts are made using a two-step manufacturing process that involves first producing a set of preforms and then consolidating these preforms into a final shaped part. To assist in the design of the processing parameters, simulations of the preforming and compression molding steps can be completed using the finite element method. Such simulations require material input data as developed through a comprehensive characterization test program, e.g. shear, tensile and bending, over the range of potential processing temperatures. The current research investigates the challenges associated with the characterization of thin, highly-oriented UHMWPE films. Variations in grip type, sample size and testing rates are explored to achieve convergence of the characterization data. Material characterization results are then used in finite element simulations of the tension test to explore element formulations that work well with the mechanical behavior. Comparisons of the results from the material characterization tests to results of simulations of the same test are performed to validate the finite element method parameters and the credibility of the user-defined material model.

Assessment of driving after stroke--a pluridisciplinary task.

PubMed

Ponsford, A-S; Viitanen, M; Lundberg, C; Johansson, K

2008-03-01

The aim of the study was to analyze the assessment procedure and identify predictors for the team decision when assessing fitness to drive a car after stroke. The material used was a retrospective data set with 200 stroke clients from Queen Elisabeth's Foundation Mobility Centre at Banstead UK. Fifty-four percent of clients were considered fit to continue driving where 9% could resume driving after car adaptation and training. Important factors for the outcome were vision (acuity and field), neuropsychological functions (divided attention), and track and/or on road test (reaction time, anticipation, speed, and positioning). Cognitive impairment was the main problem in those who failed the driving test and judged not fit for continued driving. Car adaptation, mainly comprising infrared transmitted secondary controls together with automatic transmission was recommended in 35% of the cases. The contribution of different specialist groups appears to be necessary for an effective evaluation, but the assessment procedure can be done more cost-effectively by dividing it into two separate parts and removing certain subtests. The in-car track test is an important part of the assessment procedure with a high face validity and could in many cases make it unnecessary to perform in-traffic tests with unsafe drivers. Car adaptation is often necessary for a client with pronounced hemi-paresis and a full road test can for those only be performed after training the use of car controls.

Charge-Control Unit for Testing Lithium-Ion Cells

NASA Technical Reports Server (NTRS)

Reid, Concha M.; Mazo, Michelle A.; Button, Robert M.

2008-01-01

A charge-control unit was developed as part of a program to validate Li-ion cells packaged together in batteries for aerospace use. The lithium-ion cell charge-control unit will be useful to anyone who performs testing of battery cells for aerospace and non-aerospace uses and to anyone who manufacturers battery test equipment. This technology reduces the quantity of costly power supplies and independent channels that are needed for test programs in which multiple cells are tested. Battery test equipment manufacturers can integrate the technology into their battery test equipment as a method to manage charging of multiple cells in series. The unit manages a complex scheme that is required for charging Li-ion cells electrically connected in series. The unit makes it possible to evaluate cells together as a pack using a single primary test channel, while also making it possible to charge each cell individually. Hence, inherent cell-to-cell variations in a series string of cells can be addressed, and yet the cost of testing is reduced substantially below the cost of testing each cell as a separate entity. The unit consists of electronic circuits and thermal-management devices housed in a common package. It also includes isolated annunciators to signal when the cells are being actively bypassed. These annunciators can be used by external charge managers or can be connected in series to signal that all cells have reached maximum charge. The charge-control circuitry for each cell amounts to regulator circuitry and is powered by that cell, eliminating the need for an external power source or controller. A 110-VAC source of electricity is required to power the thermal-management portion of the unit. A small direct-current source can be used to supply power for an annunciator signal, if desired.

Trial by Dutch laboratories for evaluation of non‐invasive prenatal testing. Part II—women's perspectives†

PubMed Central

van Schendel, Rachèl V.; Page‐Christiaens, G. C. (Lieve); Beulen, Lean; Bilardo, Catia M.; de Boer, Marjon A.; Coumans, Audrey B. C.; Faas, Brigitte H.; van Langen, Irene M.; Lichtenbelt, Klaske D.; van Maarle, Merel C.; Macville, Merryn V. E.; Oepkes, Dick; Pajkrt, Eva

2016-01-01

Abstract Objective To evaluate preferences and decision‐making among high‐risk pregnant women offered a choice between Non‐Invasive Prenatal Testing (NIPT), invasive testing or no further testing. Methods Nationwide implementation study (TRIDENT) offering NIPT as contingent screening test for women at increased risk for fetal aneuploidy based on first‐trimester combined testing (>1:200) or medical history. A questionnaire was completed after counseling assessing knowledge, attitudes and participation following the Multidimensional Measure of Informed Choice. Results A total of 1091/1253 (87%) women completed the questionnaire. Of these, 1053 (96.5%) underwent NIPT, 37 (3.4%) invasive testing and 1 (0.1%) declined testing. 91.7% preferred NIPT because of test safety. Overall, 77.9% made an informed choice, 89.8% had sufficient knowledge and 90.5% had positive attitudes towards NIPT. Women with intermediate (odds ratio (OR) = 3.51[1.70–7.22], p < 0.001) or high educational level (OR = 4.36[2.22–8.54], p < 0.001) and women with adequate health literacy (OR = 2.60[1.36–4.95], p = 0.004) were more likely to make an informed choice. Informed choice was associated with less decisional conflict and less anxiety (p < 0.001). Intention to terminate the pregnancy for Down syndrome was higher among women undergoing invasive testing (86.5%) compared to those undergoing NIPT (58.4%) (p < 0.001). Conclusions The majority of women had sufficient knowledge and made an informed choice. Continuous attention for counseling is required, especially for low‐educated and less health‐literate women. © 2016 The Authors. Prenatal Diagnosis published by John Wiley & Sons, Ltd. PMID:27739584

Amelioration de la precision d'un bras robotise pour une application d'ebavurage

NASA Astrophysics Data System (ADS)

Mailhot, David

Process automation is a more and more referred solution when it comes to complex, tedious or even dangerous tasks for human. Flexibility, low cost and compactness make industrial robots very attractive for automation. Even if many developments have been made to enhance robot's performances, they still can not meet some industries requirements. For instance, aerospace industry requires very tight tolerances on a large variety of parts, which is not what robots were designed for at first. When it comes to robotic deburring, robot imprecision is a major problem that needs to be addressed before it can be implemented in production. This master's thesis explores different calibration techniques for robot's dimensions that could overcome the problem and make the robotic deburring application possible. Some calibration techniques that are easy to implement in production environment are simulated and compared. A calibration technique for tool's dimensions is simulated and implemented to evaluate its potential. The most efficient technique will be used within the application. Finally, the production environment and requirements are explained. The remaining imprecision will be compensated by the use of a force/torque sensor integrated with the robot's controller and by the use of a camera. Many tests are made to define the best parameters to use to deburr a specific feature on a chosen part. Concluding tests are shown and demonstrate the potential use of robotic deburring. Keywords: robotic calibration, robotic arm, robotic precision, robotic deburring

Should I Perform Genetic Testing? A Qualitative Look into the Decision Making Considerations of Religious Israeli Undergraduate Students.

PubMed

Siani, Merav; Assaraf, Orit Ben-Zvi

2016-10-01

The aim of this study is to draw a picture of the concerns that guide the decision making of Israeli religious undergraduate students and the complex considerations they take into account while facing the need to have genetic testing or to attend a genetic counseling session. We examined how the religious affiliation of the students influences their perceptions toward genetics and how these are expressed. Qualitative data were collected from 51 semi-structured interviews with students, in which recurring themes were identified using 'thematic analysis.' The codes from the thematic analysis were obtained according to 'grounded theory'. Our results show that religious undergraduate students' decision making in these issues is influenced by factors that fall under three main categories: knowledge and perceptions, values, and norms. In order to include all the components of influence, we created the Triple C model: "Culture influences Choices towards genetic Counseling" which aims to generalize the complex decision making considerations that we detected. Our model places religion, as part of culture, as its central point of influence that impacts all three of the main categories we detected. It also traces the bidirectional influences that each of these main categories have on one another. Using this model may help identify the sociocultural differences between different types of patients, helping genetic counselors to better assist them in addressing their genetic status by tailoring the counseling more specifically to the patient's cultural uniqueness.

Design an optimum safety policy for personnel safety management - A system dynamic approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Balaji, P.

2014-10-06

Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamicsmore » model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making.« less

Neuropsychological performance changes following subthalamic versus pallidal deep brain stimulation in Parkinson's disease: a systematic review and metaanalysis.

PubMed

Elgebaly, Ahmed; Elfil, Mohamed; Attia, Attia; Magdy, Mayar; Negida, Ahmed

2018-02-01

Studies comparing subthalamus (STN) and globus pallidus internus (GPi) deep brain stimulation (DBS) for the management of Parkinson's disease in terms of neuropsychological performance are scarce and heterogeneous. Therefore, we performed a systematic review and metaanalysis to compare neuropsychological outcomes following STN DBS versus GPi DBS. A computer literature search of PubMed, the Web of Science, and Cochrane Central was conducted. Records were screened for eligible studies, and data were extracted and synthesized using Review Manager (v. 5.3 for Windows). Seven studies were included in the qualitative synthesis. Of them, four randomized controlled trials (n=345 patients) were pooled in the metaanalysis models. The standardized mean difference (SMD) of change in the Stroop color-naming test favored the GPi DBS group (SMD=-0.31, p=0.009). However, other neuropsychological outcomes did not favor either of the two groups (Stroop word-reading: SMD=-0.21, p=0.08; the Wechsler Adult Intelligence Scale (WAIS) digits forward: SMD=0.08, p=0.47; Trail Making Test Part A: SMD=-0.05, p=0.65; WAIS-R digit symbol: SMD=-0.16, p=0.29; Trail Making Test Part B: SMD=-0.14, p=0.23; Stroop color-word interference: SMD=-0.16, p=0.18; phonemic verbal fluency: bilateral DBS SMD=-0.04, p=0.73, and unilateral DBS SMD=-0.05, p=0.83; semantic verbal fluency: bilateral DBS SMD=-0.09, p=0.37, and unilateral DBS SMD=-0.29, p=0.22; Boston Naming Test: SMD=-0.11, p=0.33; Beck Depression Inventory: bilateral DBS SMD=0.15, p=0.31, and unilateral DBS SMD=0.36, p=0.11). There was no statistically significant difference in most of the neuropsychological outcomes. The present evidence does not favor any of the targets in terms of neuropsychological performance.

Selective traditions in group discussions: teachers' views about good science and the possible obstacles when encountering a new topic

NASA Astrophysics Data System (ADS)

Lundqvist, Eva; Sund, Per

2016-11-01

There is an ongoing discussion about what content that should be taught in science education and there are different views among teachers about what represent good science content. However, teachers are not isolated individuals making their own interpretations, but are part of institutionalised systems building on patterns in the selection of teaching goals and content. Earlier research shows that teachers teach in alignment with different selective traditions, which can be understood as well-developed teaching habits. Individual teachers seem to develop their personal habits on the basis of the contextual situations created by earlier generations of teachers. In order to find out which content teachers find representative for science education, we asked nine teachers to take part in group interviews to talk about what they value as "good" science content. The participants were grouped according to their selective traditions expressed in earlier studies. The method was used to dynamically explore, challenge and highlight teachers' views. The starting point for the group discussions is national tests in science. In Sweden, national tests in biology, physics and chemistry were introduced in secondary school science (year 9) in 2009. One overarching aim of these tests is to support the implementation of the science curricula and to include for example knowledge about socio-scientific issues (SSI). The content of the tests can consequently be seen as important for teachers to consider. The findings show that `resistance' to including SSI is not just an issue for individual teachers. As individuals teachers can create many kinds of obstacles, but still be interested in integrating SSI in their science teaching. However, in group discussions the teachers tend to collectively adopt the scientific rational discourse. This discourse is what joins them and creates their common identity as science teachers. In turn, they seek to free scientific knowledge from social knowledge and thereby make assessment easier.

Effect of oral amino acids on counterregulatory responses and cognitive function during insulin-induced hypoglycemia in nondiabetic and type 1 diabetic people.

PubMed

Rossetti, Paolo; Porcellati, Francesca; Busciantella Ricci, Natalia; Candeloro, Paola; Cioli, Patrizia; Nair, K Sreekumaran; Santeusanio, Fausto; Bolli, Geremia B; Fanelli, Carmine G

2008-07-01

Amino acids stimulate glucagon responses to hypoglycemia and may be utilized by the brain. The aim of this study was to assess the responses to hypoglycemia in nondiabetic and type 1 diabetic subjects after ingestion of an amino acid mixture. Ten nondiabetic and 10 diabetic type 1 subjects were studied on three different occasions during intravenous insulin (2 mU . kg(-1) . min(-1)) plus variable glucose for 160 min. In two studies, clamped hypoglycemia (47 mg/dl plasma glucose for 40 min) was induced and either oral placebo or an amino acid mixture (42 g) was given at 30 min. In the third study, amino acids were given, but euglycemia was maintained. Plasma glucose and insulin were no different in the hypoglycemia studies with both placebo and amino acids (P > 0.2). After the amino acid mixture, plasma amino acid concentrations increased to levels observed after a mixed meal (2.4 +/- 0.13 vs. placebo study 1.7 +/- 0.1 mmol/l, P = 0.02). During clamped euglycemia, ingestion of amino acids resulted in transient increases in glucagon concentrations, which returned to basal by the end of the study. During clamped hypoglycemia, glucagon response was sustained and increased more in amino acid studies versus placebo in nondiabetic and diabetic subjects (P < 0.05), but other counter-regulatory hormones and total symptom score were not different. Beta-OH-butyrate was less suppressed after amino acids (200 +/- 15 vs. 93 +/- 9 micromol/l, P = 0.01). Among the cognitive tests administered, the following indicated less deterioration after amino acids than placebo: Trail-Making part B, PASAT (Paced Auditory Serial Addition Test) (2 s), digit span forward, Stroop colored words, and verbal memory tests for nondiabetic subjects; and Trail-Making part B, digit span backward, and Stroop color tests for diabetic subjects. Oral amino acids improve cognitive function in response to hypoglycemia and enhance the response of glucagon in nondiabetic and diabetic subjects.

Pressurized Shell Molds For Metal-Matrix Composites

NASA Technical Reports Server (NTRS)

Kashalikar, Uday K.; Lusignea, Richard N.; Cornie, James

1993-01-01

Balanced-pressure molds used to make parts in complex shapes from fiber-reinforced metal-matrix composite materials. In single step, molding process makes parts in nearly final shapes; only minor finishing needed. Because molding pressure same on inside and outside, mold does not have to be especially strong and can be made of cheap, nonstructural material like glass or graphite. Fibers do not have to be cut to conform to molds. Method produces parts with high content of continuous fibers. Parts stiff but light in weight, and coefficients of thermal expansion adjusted. Parts resistant to mechanical and thermal fatigue superior to similar parts made by prior fabrication methods.

Concept-Development of a Structure Supported Membrane for Deployable Space Applications - From Nature to Manufacture and Testing

NASA Technical Reports Server (NTRS)

Zander, Martin; Belvin, W. K.

2012-01-01

Current space applications of membrane structures include large area solar power arrays, solar sails, antennas, and numerous other large aperture devices like the solar shades of the new James Webb Space Telescope. These expandable structural systems, deployed in-orbit to achieve the desired geometry, are used to collect, reflect and/or transmit electromagnetic radiation. This work, a feasibility study supporting a diploma thesis, describes the systematic process for developing a biologically inspired concept for a structure supported (integrated) membrane, that features a rip stop principle, makes self-deployment possible and is part of an ultra-light weight space application. Novel manufacturing of membrane prototypes and test results are presented for the rip-stop concepts. Test data showed that the new membrane concept has a higher tear resistance than neat film of equivalent mass.

Procedures for testing and evaluating spacecraft-type heat pipes

NASA Astrophysics Data System (ADS)

Tower, L. K.; Kaufman, W. B.

1984-04-01

This report describes part of an effort to develop dependable, cost effective spacecraft thermal control heat pipes. In the program the reliability and performance of 30 commercially available heat pipes were assessed. The pipes comprised 10 groups of varying design, with aluminum and stainless steel as structural materials, and methanol and ammonia as working fluids. The factors studied were noncondensible gas accumulation and heat transfer capability in one g. The present report supplements a brief earlier report by describing in detail the procedures required to conduct a comprehensive evaluation of heat pipes for thermal control. It discusses the test facilities and testing procedures. The manner in which data may be taken for estimating useful life and comparing performance is described. Some of the pitfalls in making such judgments are illustrated. Originator supplied keywords include: heat transfer, and corrosion.

KSC-2010-5769

NASA Image and Video Library

2010-12-03

CAPE CANAVERAL, Fla. -- The SpaceX Falcon 9 rocket static fire test on Space Launch Complex-40 at Cape Canaveral Air Force Station was aborted at T minus 1.1 seconds due to high engine chamber pressure. During the test, all nine Merlin engines, which use rocket-grade kerosene and liquid oxygen to produce 1 million pounds of thrust, are expected to fire at once. After the test, SpaceX will conduct a thorough review of all data as engineers make final preparations for the first launch of the Commercial Orbital Transportation Services (COTS) Dragon spacecraft to low Earth orbit atop the Falcon 9. This first stage firing is part of a full launch dress rehearsal, which will end after the engines fire at full power for two seconds, with only the hold-down system restraining the rocket from flight. Photo credit: NASA/Rusty Backer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stein, Joshua; Burnham, Laurie; Jones, Christian Birk

The U.S. DOE Regional Test Center for Solar Technologies program was established to validate photovoltaic (PV) technologies installed in a range of different climates. The program is funded by the Energy Department's SunShot Initiative. The initiative seeks to make solar energy cost competitive with other forms of electricity by the end of the decade. Sandia National Laboratory currently manages four different sites across the country. The National Renewable Energy Laboratory manages a fifth site in Colorado. The entire PV portfolio currently includes 20 industry partners and almost 500 kW of installed systems. The program follows a defined process that outlinesmore » tasks, milestones, agreements, and deliverables. The process is broken out into four main parts: 1) planning and design, 2) installation, 3) operations, and 4) decommissioning. This operations manual defines the various elements of each part.« less

Biodegradable Hydrophilic Polyurethane PEGU25 Loading Antimicrobial Peptide Bmap-28: A Sustained-release Membrane Able to Inhibit Bacterial Biofilm Formation in Vitro

PubMed Central

Wang, Jianzhong; Liu, Qinyu; Tian, Ye; Jian, Zhongyu; Li, Hong; Wang, Kunjie

2015-01-01

Catheter-related infection makes up a large part of hospital infection and contributes 80% to all nosocomial urological infection, costing hundreds of millions dollar per year for treatment. Biodegradable hydrophilic material incorporating antibiotic substance is a promising way to prevent catheter-related infection. And antimicrobial peptide seems an optimal drug for its desirable antibiotic effect. In the current research, we produced a new kind of antibiotic material by incorporating antimicrobial peptide Bmap-28 with polyurethane PEGU25 and tested its effect on Proteus mirabilis in vitro. Compared with the control group, PEGU25 membrane incorporating Bmap-28 had a significant lower bacteria load after co-cultured with the Proteus mirabilis. And its antibiotic effect could be observed throughout the whole 7-day test. Also the Bmap-28 membrane could delay catheter obstruction caused by encrustation. Our findings reveal that PEGU25 incorporating Bmap-28 can well inhibit bacterial biofilm formation of common pathogens for catheter-related urinary tract infection in vitro, which makes it a promising antibiotic material for medical tubes for urology. PMID:25727362

New molecular medicine: Diagnomics and pharmacogenomics

NASA Astrophysics Data System (ADS)

Kauffman, Michael G.

1999-04-01

Millennium Predictive Medicine (MPMx), a subsidiary of Millennium Pharmaceuticals, is focusing on the discovery and clinical validation of Diagnomic and Pharmacogenomic Tests which will replace many of the subjective elements of clinical decision making. Diagnomics are molecular diagnostic markers with prognostic and economic impact. While the majority of currently available diagnostics represent data points, Diagnomics allow patients and physicians to make scientifically based, individualized decisions about their disease and its therapy. Pharmacogenomics are diagnostics that specify the use or avoidance of specific therapeutics based on an individual genotype and/or disease subtype. MPMx uses the broad Millennium genomics, proteomics, and bioinformatics technologies in the analysis of human disease and drug response. These technologies permit global and unbiased approaches towards the elucidation of disease pathways and mechanisms at the molecular level. Germline or somatic mutations, RNA levels, or protein levels comprising these pathways and mechanisms are currently being evaluated as markers for disease predisposition, stage, aggressiveness, and likely drug response or drug toxicity. Diagnomic and Pharmacogenomic Tests are part of the new molecular medicine that is transforming clinical practice forma symptom/pathology-based art into a pre-symptom, mechanism- based science.

Improving Quality of Seal Leak Test Product using Six Sigma

NASA Astrophysics Data System (ADS)

Luthfi Malik, Abdullah; Akbar, Muhammad; Irianto, Dradjad

2016-02-01

Seal leak test part is a polyurethane material-based product. Based on past data, defect level of this product was 8%, higher than the target of 5%. Quality improvement effort was done using six sigma method that included phases of define, measure, analyse, improve, and control. In the design phase, a Delphi method was used to identify factors that were critical to quality. In the measure phase, stability and process capability was measured. Fault tree analysis (FTA) and failure mode and effect analysis (FMEA) were used in the next phase to analize the root cause and to determine the priority issues. Improve phase was done by compiling, selecting, and designing alternative repair. Some improvement efforts were identified, i.e. (i) making a checklist for maintenance schedules, (ii) making written reminder form, (iii) modifying the SOP more detail, and (iv) performing a major service to the vacuum machine. To ensure the continuity of improvement efforts, some control activities were executed, i.e. (i) controlling, monitoring, documenting, and setting target frequently, (ii) implementing reward and punishment system, (iii) adding cleaning tool, and (iv) building six sigma organizational structure.

The GRADE Evidence to Decision (EtD) framework for health system and public health decisions.

PubMed

Moberg, Jenny; Oxman, Andrew D; Rosenbaum, Sarah; Schünemann, Holger J; Guyatt, Gordon; Flottorp, Signe; Glenton, Claire; Lewin, Simon; Morelli, Angela; Rada, Gabriel; Alonso-Coello, Pablo

2018-05-29

To describe a framework for people making and using evidence-informed health system and public health recommendations and decisions. We developed the GRADE Evidence to Decision (EtD) framework for health system and public health decisions as part of the DECIDE project, in which we simultaneously developed frameworks for these and other types of healthcare decisions, including clinical recommendations, coverage decisions and decisions about diagnostic tests. Building on GRADE EtD tables, we used an iterative approach, including brainstorming, consultation of the literature and with stakeholders, and an international survey of policy-makers. We applied the framework to diverse examples, conducted workshops and user testing with health system and public health guideline developers and policy-makers, and observed and tested its use in real-life guideline panels. All the GRADE EtD frameworks share the same basic structure, including sections for formulating the question, making an assessment and drawing conclusions. Criteria listed in the assessment section of the health system and public health framework cover the important factors for making these types of decisions; in addition to the effects and economic impact of an option, the priority of the problem, the impact of the option on equity, and its acceptability and feasibility are important considerations that can inform both whether and how to implement an option. Because health system and public health interventions are often complex, detailed implementation considerations should be made when making a decision. The certainty of the evidence is often low or very low, but decision-makers must still act. Monitoring and evaluation are therefore often important considerations for these types of decisions. We illustrate the different components of the EtD framework for health system and public health decisions by presenting their application in a framework adapted from a real-life guideline. This framework provides a structured and transparent approach to support policy-making informed by the best available research evidence, while making the basis for decisions accessible to those whom they will affect. The health system and public health EtD framework can also be used to facilitate dissemination of recommendations and enable decision-makers to adopt, and adapt, recommendations or decisions.

Shared decision making as part of value based care: New U.S. policies challenge our readiness.

PubMed

Spatz, Erica S; Elwyn, Glyn; Moulton, Benjamin W; Volk, Robert J; Frosch, Dominick L

2017-06-01

Shared decision making in the United States is increasingly being recognized as part of value-based care. During the last decade, several state and federal initiatives have linked shared decision making with reimbursement and increased protection from litigation. Additionally, private and public foundations are increasingly funding studies to identify best practices for moving shared decision making from the research world into clinical practice. These shifts offer opportunities and challenges for ensuring effective implementation. Copyright © 2017. Published by Elsevier GmbH.

STS-48 ESC image of the MODE-01 Fluid Test Article (FTA) on OV-103's middeck

NASA Technical Reports Server (NTRS)

1991-01-01

An electronic still camera (ESC) closeup shows the STS-48 Middeck Zero ('0') Gravity Dynamics Experiment 01 (MODE-01) Fluid Test Article (FTA) attached to an experimental support module (ESM) located in a forward middeck locker onboard the earth-orbiting Discovery, Orbiter Vehicle (OV) 103. The FTA is a 3.1-cm diameter cylindrical sealed Lexan tank. The FTA electromagnetic actuator has excited the test article sinusoidally, which causes the fluid inside the tank to slosh. These slosh forces, along with other data such as acceleration levels of the entire assembly, are measured by the force balance and recorded in digital form on an optical disk for later ground analysis. Crewmembers were testing the ESC as part of Development Test Objective (DTO) 648, Electronic Still Photography. The digital image was stored on a removable hard disk or small optical disk, and could be converted to a format suitable for downlink transmission. The ESC is making its initial appearance on this Space Shutt

Environmental testing, official methods, and attitudes toward noncompliance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krages, B.P. II

1999-08-01

The US Environmental Protection Agency (EPA) has established longstanding regulations that prescribe the analytical procedures to be followed when parties submit information pursuant to regulatory programs. However, problems associated with unnecessary or irrational testing requirements along with the difficulty in obtaining approval of alternate procedures, has resulted in widespread noncompliance with those regulations. For the most part, agencies have tolerated this attitude of noncompliance and have in some ways contributed to it by adopting testing requirements that make little or no sense. Unfortunately, this complacency leaves agencies and regulated parties vulnerable to legal problems, such as court challenges to environmentalmore » permits. Regulatory agencies should confront the problems that have led to pervasive noncompliance and amend regulations to reflect that concerns about having useful data frequently override concerns about the national uniformity of test methods. In addition, the regulated community should be more mindful of the legal enforceability of promulgated testing requirements and affirmatively address those concerns with the promulgating agencies.« less

Perspectives on Validation of High-Throughput Assays Supporting 21st Century Toxicity Testing1

PubMed Central

Judson, Richard; Kavlock, Robert; Martin, Matt; Reif, David; Houck, Keith; Knudsen, Thomas; Richard, Ann; Tice, Raymond R.; Whelan, Maurice; Xia, Menghang; Huang, Ruili; Austin, Christopher; Daston, George; Hartung, Thomas; Fowle, John R.; Wooge, William; Tong, Weida; Dix, David

2014-01-01

Summary In vitro, high-throughput screening (HTS) assays are seeing increasing use in toxicity testing. HTS assays can simultaneously test many chemicals, but have seen limited use in the regulatory arena, in part because of the need to undergo rigorous, time-consuming formal validation. Here we discuss streamlining the validation process, specifically for prioritization applications in which HTS assays are used to identify a high-concern subset of a collection of chemicals. The high-concern chemicals could then be tested sooner rather than later in standard guideline bioassays. The streamlined validation process would continue to ensure the reliability and relevance of assays for this application. We discuss the following practical guidelines: (1) follow current validation practice to the extent possible and practical; (2) make increased use of reference compounds to better demonstrate assay reliability and relevance; (3) deemphasize the need for cross-laboratory testing, and; (4) implement a web-based, transparent and expedited peer review process. PMID:23338806

43 CFR 46.20 - How to use this part.

Code of Federal Regulations, 2010 CFR

2010-10-01

....4501505.2 (b) The Responsible Official will ensure that the decision making process for proposals subject to this part includes appropriate NEPA review. (c) During the decision making process for each... the relevant environmental document. The Responsible Official's decision may combine elements of...

Nurse educators and decision making: a female perspective.

PubMed

Valentine, P E

1992-01-01

Quality of work life issues are major concerns of nurses today. Decision making is one such issue. This article is part of a larger case study of a Canadian hospital school of nursing that asked whether women nurse educators bring unique orientations to the workplace that have relevance for the administration of nursing organizations. The process of decision making, a small part of the larger study, is discussed in this article. The results suggested that women nurse educators used a cooperative, collaborative, highly participatory style of decision making that resulted in decisions based on consensus. The implications this female style of decision making has for nurses and nurse administrators is discussed.

Use, Assessment, and Improvement of the Loci-CHEM CFD Code for Simulation of Combustion in a Single Element GO2/GH2 Injector and Chamber

NASA Technical Reports Server (NTRS)

Westra, Douglas G.; Lin, Jeff; West, Jeff; Tucker, Kevin

2006-01-01

This document is a viewgraph presentation of a paper that documents a continuing effort at Marshall Space Flight Center (MSFC) to use, assess, and continually improve CFD codes to the point of material utility in the design of rocket engine combustion devices. This paper describes how the code is presently being used to simulate combustion in a single element combustion chamber with shear coaxial injectors using gaseous oxygen and gaseous hydrogen propellants. The ultimate purpose of the efforts documented is to assess and further improve the Loci-CHEM code and the implementation of it. Single element shear coaxial injectors were tested as part of the Staged Combustion Injector Technology (SCIT) program, where detailed chamber wall heat fluxes were measured. Data was taken over a range of chamber pressures for propellants injected at both ambient and elevated temperatures. Several test cases are simulated as part of the effort to demonstrate use of the Loci-CHEM CFD code and to enable us to make improvements in the code as needed. The simulations presented also include a grid independence study on hybrid grids. Several two-equation eddy viscosity low Reynolds number turbulence models are also evaluated as part of the study. All calculations are presented with a comparison to the experimental data. Weaknesses of the code relative to test data are discussed and continuing efforts to improve the code are presented.

United States Air Force High School Apprenticeship Program: 1989 Program Management Report. Volume 1

DTIC Science & Technology

1988-12-01

itself, and Kevin Thayer for acquainting me with and making me comfortable with the laboratory and the engineers and for being very patient and helpful...zenalti:_s is - resuit of the offsets. A series of free flignt tests waere cooc ;c s part of *-r.e offset fon vesti;tion, .Iorz o In n AC coce -,-n of...time to patiently answer all my questions and explaining what I wanted to know. Kevin Morgan for the advice and help throughout the summer about

The Shock and Vibration Bulletin. Part 1. Welcome, Keynote Address Invited Papers MIL-STD-810D MIL-STD-810D Panel Session

DTIC Science & Technology

1984-06-01

computer. The testing purposes is both expensive and time failure criterion is basically the effective comsuming , making it more difficult to obtain... behavior of a structure in terms of do critical review on a science because a its normal modes. The fundamental *science is something that ia fact... behavior expressed in some simple sort of rules of living in the Garden of Eden; they characteristic, and a deflected shape of each could eat from any

Metal-Organic Vapor Phase Epitaxial Reactor for the Deposition of Infrared Detector Materials

DTIC Science & Technology

2015-04-09

out during 2013. A set of growth experiments to deposit CdTe and ZnTe thin films on GaAs and Si substrates was carried out to test the system...After several dummy runs, a few growth runs to deposit CdTe and ZnTe, both doped and undoped, were grown on 3-inch diameter Si substrates or part of...to deposit CdTe and ZnTe on Si and GaAs substrates for use in this project. Some layers have been processed to make solar cells. Project 3

Online medical symbol recognition using a Tablet PC

NASA Astrophysics Data System (ADS)

Kundu, Amlan; Hu, Qian; Boykin, Stanley; Clark, Cheryl; Fish, Randy; Jones, Stephen; Moore, Stephen

2011-01-01

In this paper we describe a scheme to enhance the usability of a Tablet PC's handwriting recognition system by including medical symbols that are not a part of the Tablet PC's symbol library. The goal of this work is to make handwriting recognition more useful for medical professionals accustomed to using medical symbols in medical records. To demonstrate that this new symbol recognition module is robust and expandable, we report results on both a medical symbol set and an expanded symbol test set which includes selected mathematical symbols.

High-performance packaging for monolithic microwave and millimeter-wave integrated circuits

NASA Technical Reports Server (NTRS)

Shalkhauser, K. A.; Li, K.; Shih, Y. C.

1992-01-01

Packaging schemes are developed that provide low-loss, hermetic enclosure for enhanced monolithic microwave and millimeter-wave integrated circuits. These package schemes are based on a fused quartz substrate material offering improved RF performance through 44 GHz. The small size and weight of the packages make them useful for a number of applications, including phased array antenna systems. As part of the packaging effort, a test fixture was developed to interface the single chip packages to conventional laboratory instrumentation for characterization of the packaged devices.

Antimatter interferometry for gravity measurements.

PubMed

Hamilton, Paul; Zhmoginov, Andrey; Robicheaux, Francis; Fajans, Joel; Wurtele, Jonathan S; Müller, Holger

2014-03-28

We describe a light-pulse atom interferometer that is suitable for any species of atom and even for electrons and protons as well as their antiparticles, in particular, for testing the Einstein equivalence principle with antihydrogen. The design obviates the need for resonant lasers through far-off resonant Bragg beam splitters and makes efficient use of scarce atoms by magnetic confinement and atom recycling. We expect to reach an initial accuracy of better than 1% for the acceleration of the free fall of antihydrogen, which can be improved to the part-per million level.

The construction of bilingual teaching of optoelectronic technology

NASA Astrophysics Data System (ADS)

Zhang, Yang; Zhao, Enming; Yang, Fan; Li, Qingbo; Zhu, Zheng; Li, Cheng; Sun, Peng

2017-08-01

This paper combines the characteristics of optoelectronic technology with that of bilingual teaching. The course pays attention to integrating theory with practice, and cultivating learners' ability. Reform and exploration have been done in the fields of teaching materials, teaching content, teaching methods, etc. The concrete content mainly includes five parts: selecting teaching materials, establishing teaching syllabus, choosing suitable teaching method, making multimedia courseware and improving the test system, which can arouse students' interest in their study and their autonomous learning ability to provide beneficial references for improving the quality of talents of optoelectronic bilingual courses.

Influence of educational status on executive function and functional balance in individuals with Parkinson disease.

PubMed

Souza, Carolina de Oliveira; Voos, Mariana Callil; Francato, Débora Valente; Chien, Hsin Fen; Barbosa, Egberto Reis

2013-03-01

This study investigated whether educational status influenced how people with Parkinson disease (PD) performed on Parts A, B, and DELTA of the Trail Making Test (TMT) and on the Berg Balance Scale (BBS). Recent studies have shown that educational status may influence cognitive and motor test performance. We gave the TMT and the BBS to assess executive function and functional balance in 28 people with PD (Hoehn and Yahr score between 2 and 3) and 30 healthy elderly people. Participants reported their number of years of formal education. We divided each group of participants by educational status: low (4 to 10 years of education) or high (≥11 years). In both the PD (P=0.018) and control (P=0.003) groups, participants with low educational status performed worse on the TMT Part B than did those with high educational status. Within the PD group, the less-educated participants scored worse on the BBS than did the more educated (P<0.001); this difference was not significant between the more- and less-educated controls (P=0.976). Whether or not they had PD, less-educated people performed worse than more-educated people on the TMT Part B. Educational status affected executive function, but PD status did not. Among individuals with PD, educational status influenced functional balance.

A new free and open source tool for space plasma modeling.

NASA Astrophysics Data System (ADS)

Honkonen, I. J.

2014-12-01

I will present a new distributed memory parallel, free and open source computational model for studying space plasma. The model is written in C++ with emphasis on good software development practices and code readability without sacrificing serial or parallel performance. As such the model could be especially useful for education, for learning both (magneto)hydrodynamics (MHD) and computational model development. By using latest features of the C++ standard (2011) it has been possible to develop a very modular program which improves not only the readability of code but also the testability of the model and decreases the effort required to make changes to various parts of the program. Major parts of the model, functionality not directly related to (M)HD, have been outsourced to other freely available libraries which has reduced the development time of the model significantly. I will present an overview of the code architecture as well as details of different parts of the model and will show examples of using the model including preparing input files and plotting results. A multitude of 1-, 2- and 3-dimensional test cases are included in the software distribution and the results of, for example, Kelvin-Helmholtz, bow shock, blast wave and reconnection tests, will be presented.

X-ray Fluorescence Spectroscopy Study of Coating Thickness and Base Metal Composition

NASA Technical Reports Server (NTRS)

Rolin, T. D.; Leszczuk, Y.

2008-01-01

For electrical, electronic, and electromechanical (EEE) parts to be approved for space use, they must be able to meet safety standards approved by NASA. A fast, reliable, and precise method is needed to make sure these standards are met. Many EEE parts are coated in gold (Au) and nickel (Ni), and the thickness coating is crucial to a part s performance. A nondestructive method that is efficient in measuring coating thickness is x-ray fluorescence (XRF) spectroscopy. The XRF spectrometer is a machine designed to measure layer thickness and composition of single or multilayered samples. By understanding the limitations in the collection of the data by this method, accurate composition and thickness measurements can be obtained for samples with Au and Ni coatings. To understand the limitations of data found, measurements were taken with the XRF spectrometer and compared to true values of standard reference materials (SRM) that were National Institute of Standards and Technology (NIST) traceable. For every sample, six different parameters were varied to understand measurement error: coating/substrate combination, number of layers, counting interval, collimator size, coating thickness, and test area location. Each measurement was taken in accordance with standards set by the American Society for Testing and Materials (ASTM) International Standard B 568.

A comparison of the lattice discrete particle method to the finite-element method and the K&C material model for simulating the static and dynamic response of concrete.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Jovanca J.; Bishop, Joseph E.

2013-11-01

This report summarizes the work performed by the graduate student Jovanca Smith during a summer internship in the summer of 2012 with the aid of mentor Joe Bishop. The projects were a two-part endeavor that focused on the use of the numerical model called the Lattice Discrete Particle Model (LDPM). The LDPM is a discrete meso-scale model currently used at Northwestern University and the ERDC to model the heterogeneous quasi-brittle material, concrete. In the first part of the project, LDPM was compared to the Karagozian and Case Concrete Model (K&C) used in Presto, an explicit dynamics finite-element code, developed atmore » Sandia National Laboratories. In order to make this comparison, a series of quasi-static numerical experiments were performed, namely unconfined uniaxial compression tests on four varied cube specimen sizes, three-point bending notched experiments on three proportional specimen sizes, and six triaxial compression tests on a cylindrical specimen. The second part of this project focused on the application of LDPM to simulate projectile perforation on an ultra high performance concrete called CORTUF. This application illustrates the strengths of LDPM over traditional continuum models.« less

Moving Technologies from the Test Tube to Commercial Products

NASA Technical Reports Server (NTRS)

Bryant, Robert G.

2013-01-01

Successful technologies include objects, processes, and procedures that share a common theme; they are being used to generate new products that create economic growth. The foundation is the invention, but the invention is a small part of the overall effort. The pathway to success is understanding the competition, proper planning, record keeping, integrating a supply chain, understanding actual costs, intellectual property (IP), benchmarking, and timing. Additionally, there are obstacles that include financing, what to make, buy, and sell, and the division of labor i.e. recognizing who is best at what task. Over the past two decades, NASA Langley Research Center (LaRC) has developed several commercially available technologies. The approach to commercialization of three of these inventions; Langley Research Center-Soluble Imide (LaRC-SI, Imitec Inc.), the Thin Layer Unimorph Driver (THUNDER, FACE International), and the Macrofiber Composite (MFC, Smart Material Corp.) will be described, as well as some of the lessons learned from the process. What makes these three inventions interesting is that one was created in the laboratory; another was built using the previous invention as part of its process, and the last one was created by packaging commercial-off-the-shelf (COTS) materials thereby creating a new component.

CT scan range estimation using multiple body parts detection: let PACS learn the CT image content.

PubMed

Wang, Chunliang; Lundström, Claes

2016-02-01

The aim of this study was to develop an efficient CT scan range estimation method that is based on the analysis of image data itself instead of metadata analysis. This makes it possible to quantitatively compare the scan range of two studies. In our study, 3D stacks are first projected to 2D coronal images via a ray casting-like process. Trained 2D body part classifiers are then used to recognize different body parts in the projected image. The detected candidate regions go into a structure grouping process to eliminate false-positive detections. Finally, the scale and position of the patient relative to the projected figure are estimated based on the detected body parts via a structural voting. The start and end lines of the CT scan are projected to a standard human figure. The position readout is normalized so that the bottom of the feet represents 0.0, and the top of the head is 1.0. Classifiers for 18 body parts were trained using 184 CT scans. The final application was tested on 136 randomly selected heterogeneous CT scans. Ground truth was generated by asking two human observers to mark the start and end positions of each scan on the standard human figure. When compared with the human observers, the mean absolute error of the proposed method is 1.2% (max: 3.5%) and 1.6% (max: 5.4%) for the start and end positions, respectively. We proposed a scan range estimation method using multiple body parts detection and relative structure position analysis. In our preliminary tests, the proposed method delivered promising results.

KSC-2009-2562

NASA Image and Video Library

2009-04-08

CAPE CANAVERAL, Fla. – Members of the 920th Rescue Wing make their way toward the mockup Orion crew exploration vehicle floating in the open water of the Trident Basin at Port Canaveral, Fla. They will place a flotation collar around the mockup vehicle. The mockup vehicle will undergo testing in open water. The goal of the operation, dubbed the Post-landing Orion Recovery Test, or PORT, is to determine what kind of motion astronauts can expect after landing, as well as outside conditions for recovery teams. Orion is targeted to begin carrying humans to the International Space Station in 2015 and to the moon by 2020. Orion, along with the Ares I and V rockets and the Altair lunar lander, are part of the Constellation Program. Photo credit: NASA/Kim Shiflett

Tensile strength of various nylon PA6 specimen modes

NASA Astrophysics Data System (ADS)

Raz, Karel; Zahalka, Martin

2017-05-01

This article explores the influence of production technique on the strength of nylon parts. Identical specimens were manufactured by various techniques. The material of specimens was nylon PA6. 3D printing and injection molding were used, with various orientations of printed layers, and various orientations of specimens in the working space of the 3D printer. The variants are described in detail. A special mold was used for the injection molding process in order to make specimens with and without a weld line. The effect of this weld line was evaluated. All specimens were tested using the standard tensile test configuration. The strength was compared. It was found that the same plastic material has very different mechanical properties depending on the production process.

KSC-2010-5768

NASA Image and Video Library

2010-12-03

CAPE CANAVERAL, Fla. -- The SpaceX Falcon 9 rocket awaits a static fire test on Space Launch Complex-40 at Cape Canaveral Air Force Station, in which all nine Merlin engines will fire at once. The engines use rocket-grade kerosene and liquid oxygen to produce 1 million pounds of thrust. After the test, SpaceX will conduct a thorough review of all data as engineers make final preparations for the first launch of the Commercial Orbital Transportation Services (COTS) Dragon spacecraft to low Earth orbit atop the Falcon 9. This first stage firing is part of a full launch dress rehearsal, which will end after the engines fire at full power for two seconds, with only the hold-down system restraining the rocket from flight. Photo credit: NASA/Rusty Backer

Clean birth kits to improve birth practices: development and testing of a country level decision support tool.

PubMed

Hundley, Vanora A; Avan, Bilal I; Ahmed, Haris; Graham, Wendy J

2012-12-19

Clean birth practices can prevent sepsis, one of the leading causes of both maternal and newborn mortality. Evidence suggests that clean birth kits (CBKs), as part of package that includes education, are associated with a reduction in newborn mortality, omphalitis, and puerperal sepsis. However, questions remain about how best to approach the introduction of CBKs in country. We set out to develop a practical decision support tool for programme managers of public health systems who are considering the potential role of CBKs in their strategy for care at birth. Development and testing of the decision support tool was a three-stage process involving an international expert group and country level testing. Stage 1, the development of the tool was undertaken by the Birth Kit Working Group and involved a review of the evidence, a consensus meeting, drafting of the proposed tool and expert review. In Stage 2 the tool was tested with users through interviews (9) and a focus group, with federal and provincial level decision makers in Pakistan. In Stage 3 the findings from the country level testing were reviewed by the expert group. The decision support tool comprised three separate algorithms to guide the policy maker or programme manager through the specific steps required in making the country level decision about whether to use CBKs. The algorithms were supported by a series of questions (that could be administered by interview, focus group or questionnaire) to help the decision maker identify the information needed. The country level testing revealed that the decision support tool was easy to follow and helpful in making decisions about the potential role of CBKs. Minor modifications were made and the final algorithms are presented. Testing of the tool with users in Pakistan suggests that the tool facilitates discussion and aids decision making. However, testing in other countries is needed to determine whether these results can be replicated and to identify how the tool can be adapted to meet country specific needs.

Additive Manufacturing Design Considerations for Liquid Engine Components

NASA Technical Reports Server (NTRS)

Whitten, Dave; Hissam, Andy; Baker, Kevin; Rice, Darron

2014-01-01

The Marshall Space Flight Center's Propulsion Systems Department has gained significant experience in the last year designing, building, and testing liquid engine components using additive manufacturing. The department has developed valve, duct, turbo-machinery, and combustion device components using this technology. Many valuable lessons were learned during this process. These lessons will be the focus of this presentation. We will present criteria for selecting part candidates for additive manufacturing. Some part characteristics are 'tailor made' for this process. Selecting the right parts for the process is the first step to maximizing productivity gains. We will also present specific lessons we learned about feature geometry that can and cannot be produced using additive manufacturing machines. Most liquid engine components were made using a two-step process. The base part was made using additive manufacturing and then traditional machining processes were used to produce the final part. The presentation will describe design accommodations needed to make the base part and lessons we learned about which features could be built directly and which require the final machine process. Tolerance capabilities, surface finish, and material thickness allowances will also be covered. Additive Manufacturing can produce internal passages that cannot be made using traditional approaches. It can also eliminate a significant amount of manpower by reducing part count and leveraging model-based design and analysis techniques. Information will be shared about performance enhancements and design efficiencies we experienced for certain categories of engine parts.

The students’ ability in mathematical literacy for the quantity, and the change and relationship problems on the PISA adaptation test

NASA Astrophysics Data System (ADS)

Julie, Hongki; Sanjaya, Febi; Yudhi Anggoro, Ant.

2017-09-01

One of purposes of this study was to describe the solution profile of the junior high school students for the PISA adaptation test. The procedures conducted by researchers to achieve this objective were (1) adapting the PISA test, (2) validating the adapting PISA test, (3) asking junior high school students to do the adapting PISA test, and (4) making the students’ solution profile. The PISA problems for mathematics could be classified into four areas, namely quantity, space and shape, change and relationship, and uncertainty. The research results that would be presented in this paper were the result test for quantity, and change and relationship problems. In the adapting PISA test, there were fifteen questions that consist of two questions for the quantity group, six questions for space and shape group, three questions for the change and relationship group, and four questions for uncertainty. Subjects in this study were 18 students from 11 junior high schools in Yogyakarta, Central Java, and Banten. The type of research that used by the researchers was a qualitative research. For the first quantity problem, there were 38.89 % students who achieved level 3. For the second quantity problem, there were 88.89 % students who achieved level 2. For part a of the first change and relationship problem, there were 55.56 % students who achieved level 5. For part b of the first change and relationship problem, there were 77.78 % students who achieved level 2. For the second change and relationship problem, there were 38.89 % students who achieved level 2.

14 CFR 145.61 - Limited ratings.

Code of Federal Regulations, 2013 CFR

2013-01-01

... of airframe, powerplant, propeller, radio, instrument, or accessory, or part thereof, or performs... station ratings. Such a rating may be limited to a specific model aircraft, engine, or constituent part...— (1) Airframes of a particular make and model; (2) Engines of a particular make and model; (3...

Rethinking HIV exceptionalism: the ethics of opt-out HIV testing in sub-Saharan Africa

PubMed Central

2010-01-01

Abstract Opt-out testing for the human immunodeficiency virus (HIV) incorporates testing as a routine part of health care for all patients unless they refuse. The ethics of this approach to testing in sub-Saharan Africa is a source of controversy. Opt-out HIV testing is expected to improve survival by increasing case detection and thus linking more HIV-infected people to earlier treatment, provided there is effective patient follow-up and programme sustainability. At the population level, these benefits will likely outweigh the potential negative consequences of individuals experiencing HIV-related stigma. These justifications appeal to consequentialist moral theories that the acceptability of an action depends upon its outcomes. On the other hand, liberal moral theories state that the autonomy of individuals should always be protected unless restricting autonomy is necessary to protect the welfare of others. Opt-out consent may restrict autonomy and it is unclear whether it would benefit people other than those being tested. Yet, the doctrine of libertarian paternalism proposes that it is justifiable and desirable to use unobtrusive mechanisms to help individuals make choices to maximize their own welfare. Central to this idea are the premises featured by supporters of opt-out consent that individuals will not always make the best choices for their own welfare but they may be influenced to do so in ways that will not compromise their freedom of choice. Also important is the premise that all policies inevitably exert some such influence: opt-in consent encourages test refusal just as opt-out consent encourages acceptance. Based on these premises, opt-out testing may be an effective and ethically acceptable policy response to Africa’s HIV epidemic. PMID:20865076

Rethinking HIV exceptionalism: the ethics of opt-out HIV testing in sub-Saharan Africa.

PubMed

April, Michael D

2010-09-01

Opt-out testing for the human immunodeficiency virus (HIV) incorporates testing as a routine part of health care for all patients unless they refuse. The ethics of this approach to testing in sub-Saharan Africa is a source of controversy. Opt-out HIV testing is expected to improve survival by increasing case detection and thus linking more HIV-infected people to earlier treatment, provided there is effective patient follow-up and programme sustainability. At the population level, these benefits will likely outweigh the potential negative consequences of individuals experiencing HIV-related stigma. These justifications appeal to consequentialist moral theories that the acceptability of an action depends upon its outcomes. On the other hand, liberal moral theories state that the autonomy of individuals should always be protected unless restricting autonomy is necessary to protect the welfare of others. Opt-out consent may restrict autonomy and it is unclear whether it would benefit people other than those being tested. Yet, the doctrine of libertarian paternalism proposes that it is justifiable and desirable to use unobtrusive mechanisms to help individuals make choices to maximize their own welfare. Central to this idea are the premises featured by supporters of opt-out consent that individuals will not always make the best choices for their own welfare but they may be influenced to do so in ways that will not compromise their freedom of choice. Also important is the premise that all policies inevitably exert some such influence: opt-in consent encourages test refusal just as opt-out consent encourages acceptance. Based on these premises, opt-out testing may be an effective and ethically acceptable policy response to Africa's HIV epidemic.

Crew Procedures for Continuous Descent Arrivals Using Conventional Guidance

NASA Technical Reports Server (NTRS)

Oseguera-Lohr, Rosa M.; Williams, David H.; Lewis, Elliot T,

2007-01-01

This paper presents results from a simulation study which investigated the use of Continuous Descent Arrival (CDA) procedures for conducting a descent through a busy terminal area, using conventional transport-category automation. This research was part of the Low Noise Flight Procedures (LNFP) element within the Quiet Aircraft Technology (QAT) Project, that addressed development of flight guidance, and supporting pilot and Air Traffic Control (ATC) procedures for low noise operations. The procedures and chart were designed to be easy to understand, and to make it easy for the crew to make changes via the Flight Management Computer Control-Display Unit (FMC-CDU) to accommodate changes from ATC. The test runs were intended to represent situations typical of what exists in many of today's terminal areas, including interruptions to the descent in the form of clearances issued by ATC.

Electromagnetic inhibition of high frequency thermal bonding machine

NASA Astrophysics Data System (ADS)

He, Hong; Zhang, Qing-qing; Li, Hang; Zhang, Da-jian; Hou, Ming-feng; Zhu, Xian-wei

2011-12-01

The traditional high frequency thermal bonding machine had serious radiation problems at dominant frequency, two times frequency and three times frequency. Combining with its working principle, the problems of electromagnetic compatibility were studied, three following measures were adopted: 1.At the head part of the high frequency thermal bonding machine, resonant circuit attenuator was designed. The notch groove and reaction field can make the radiation being undermined or absorbed; 2.The electromagnetic radiation shielding was made for the high frequency copper power feeder; 3.Redesigned the high-frequency oscillator circuit to reduce the output of harmonic oscillator. The test results showed that these measures can make the output according with the national standard of electromagnetic compatibility (GB4824-2004-2A), the problems of electromagnetic radiation leakage can be solved, and good social, environmental and economic benefits would be brought.

Effect of continuous theta burst stimulation of the right dorsolateral prefrontal cortex on cerebral blood flow changes during decision making.

PubMed

Cho, Sang Soo; Pellecchia, Giovanna; Ko, Ji Hyun; Ray, Nicola; Obeso, Ignacio; Houle, Sylvain; Strafella, Antonio P

2012-04-01

Decision making is a cognitive function relaying on a complex neural network. In particular, the right dorsolateral prefrontal cortex (DLPFC) plays a key role within this network. We used positron emission tomography (PET) combined with continuous theta burst transcranial magnetic stimulation (cTBS) to investigate neuronal and behavioral changes in normal volunteers while performing a delay discounting (DD) task. We aimed to test whether stimulation of right DLPFC would modify the activation pattern of the neural circuit underlying decision making during the DD task and influence discounting behavior. We found that cTBS of the right DLPFC influenced decision making by reducing impulsivity and inducing participants to favor large but delayed rewards instead of immediate but small rewards. Stimulation also affected activation in several prefrontal areas associated with DD. In particular, we observed a reduced regional cerebral blood flow (rCBF) in the ipsilateral DLPFC (BA 46) extending into the rostral part of the prefrontal cortex (BA 10) as well as a disrupted relationship between impulsivity (k-value) and rCBF in these and other prefrontal areas. These findings suggest that transcranial magnetic stimulation of the DLPFC influences the neural network underlying impulsive decision making behavior. Copyright © 2012 Elsevier Inc. All rights reserved.

Haptic control of a pneumatic muscle actuator to provide resistance for simulated isokinetic exercise; part II: control development and testing.

PubMed

Hall, Kara L; Phillips, Chandler A; Reynolds, David B; Mohler, Stanley R; Rogers, Dana B; Neidhard-Doll, Amy T

2015-01-01

Pneumatic muscle actuators (PMAs) have a high power to weight ratio and possess unique characteristics which make them ideal actuators for applications involving human interaction. PMAs are difficult to control due to nonlinear dynamics, presenting challenges in system implementation. Despite these challenges, PMAs have great potential as a source of resistance for strength training and rehabilitation. The objective of this work was to control a PMA for use in isokinetic exercise, potentially benefiting anyone in need of optimal strength training through a joint's range of motion. The controller, based on an inverse three-element phenomenological model and adaptive nonlinear control, allows the system to operate as a type of haptic device. A human quadriceps dynamic simulator was developed (as described in Part I of this work) so that control effectiveness and accommodation could be tested prior to human implementation. Tracking error results indicate that the control system is effective at producing PMA displacement and resistance necessary for a scaled, simulated neuromuscular actuator to maintain low-velocity isokinetic movement during simulated concentric and eccentric knee extension.

Cracking Problems and Mechanical Characteristics of PME and BME Ceramic Capacitors

NASA Technical Reports Server (NTRS)

Teverovsky, Alexander

2018-01-01

Most failures in MLCCs are caused by cracking that create shorts between opposite electrodes of the parts. A use of manual soldering makes this problem especially serious for space industry. Experience shows that different lots of ceramic capacitors might have different susceptibility to cracking under manual soldering conditions. This simulates a search of techniques that would allow revealing capacitors that are most robust to soldering-induced stresses. Currently, base metal electrode (BME) capacitors are introduced to high-reliability applications as a replacement of precious metal electrode (PME) parts. Understanding the difference in the susceptibility to cracking between PME and BME capacitors would facilitate this process. This presentation gives a review of mechanical characteristics measured in-situ on MLCCs that includes flexural strength, Vickers hardness, indentation fracture toughness, and the board flex testing and compare characteristics of BME and PME capacitors. A history case related to cracking in PME capacitors that caused flight system malfunctions and mechanisms of failure are considered. Possible qualification tests that would allow evaluation of the resistance of MLCCs to manual soldering are suggested and perspectives related to introduction of BME capacitors discussed.

The influence of printing parameters on selected mechanical properties of FDM/FFF 3D-printed parts

NASA Astrophysics Data System (ADS)

Ćwikła, G.; Grabowik, C.; Kalinowski, K.; Paprocka, I.; Ociepka, P.

2017-08-01

Rapid Prototyping technologies, especially 3D printing are becoming increasingly popular due to their usability and the constant decrease in price of printing equipment and materials. The article focuses on the study of selected mechanical strength properties of 3D-printed elements, which are not very important if the element is only a model for further manufacturing techniques, but which are important when 3D-printed elements will be a part of a functioning device, e.g. a part of unique scientific equipment. The research was carried out on a set of standardised samples, printed with low-cost standard materials (ABS), using a cheap 3D printer. The influence of parameters (such as the type of infill pattern, infill density, shell thickness, printing temperature, the type of material) on selected mechanical properties of the samples, were tested. The obtained results allows making conscious decisions on the printing of elements to be durable enough, either on a non-professional printer, or when to ordered by a professional manufacturer.

Traceability and Risk Analysis Strategies for Addressing Counterfeit Electronics in Supply Chains for Complex Systems.

PubMed

DiMase, Daniel; Collier, Zachary A; Carlson, Jinae; Gray, Robin B; Linkov, Igor

2016-10-01

Within the microelectronics industry, there is a growing concern regarding the introduction of counterfeit electronic parts into the supply chain. Even though this problem is widespread, there have been limited attempts to implement risk-based approaches for testing and supply chain management. Supply chain risk management tends to focus on the highly visible disruptions of the supply chain instead of the covert entrance of counterfeits; thus counterfeit risk is difficult to mitigate. This article provides an overview of the complexities of the electronics supply chain, and highlights some gaps in risk assessment practices. In particular, this article calls for enhanced traceability capabilities to track and trace parts at risk through various stages of the supply chain. Placing the focus on risk-informed decision making through the following strategies is needed, including prioritization of high-risk parts, moving beyond certificates of conformance, incentivizing best supply chain management practices, adoption of industry standards, and design and management for supply chain resilience. © 2016 Society for Risk Analysis.

Firing Room Remote Application Software Development & Swamp Works Laboratory Robot Software Development

NASA Technical Reports Server (NTRS)

Garcia, Janette

2016-01-01

The National Aeronautics and Space Administration (NASA) is creating a way to send humans beyond low Earth orbit, and later to Mars. Kennedy Space Center (KSC) is working to make this possible by developing a Spaceport Command and Control System (SCCS) which will allow the launch of Space Launch System (SLS). This paper's focus is on the work performed by the author in her first and second part of the internship as a remote application software developer. During the first part of her internship, the author worked on the SCCS's software application layer by assisting multiple ground subsystems teams including Launch Accessories (LACC) and Environmental Control System (ECS) on the design, development, integration, and testing of remote control software applications. Then, on the second part of the internship, the author worked on the development of robot software at the Swamp Works Laboratory which is a research and technology development group which focuses on inventing new technology to help future In-Situ Resource Utilization (ISRU) missions.

11 CFR 114.6 - Twice yearly solicitations.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., and may not participate in the decision making process whereby the separate segregated fund makes... received in accordance with the requirements of part 102 and shall also— (i) Establish a separate account... provide this information within a reasonable time prior to the reporting date of the fund under part 104...

Making Diversity Awareness Part of Your Teaching.

ERIC Educational Resources Information Center

Kirk, Rea; Nkemnji, John; Gudgeon, Katherine; Hardy, Sarah; Hooker, Gina; Lowry, Mark; Roberts, Brionne

This paper presents a series of interactive activities designed to help educators make diversity awareness part of their teaching. The activities are: "Best Friends," which helps people recognize the role race plays in their perceptions of people and in their values; "Conclusion Jumping," which helps people identify common stereotypes and raise…

The role of decision-making in cannabis-related problems among young adults

PubMed Central

Gonzalez, Raul; Schuster, Randi M.; Mermelstein, Robin M.; Diviak, Kathleen R.

2015-01-01

Background Deficits in decision-making and episodic memory are often reported among heavy cannabis users, yet little is known on how they influence negative consequences from cannabis use. Individual differences in decision-making may explain, in part, why some individuals experience significant problems from their cannabis use whereas others do not. We hypothesized that poor decision-making would moderate relationships between amount of cannabis use and problems from cannabis use whereas episodic memory performance would not. Method Young adult cannabis users (n = 52) with cannabis as their drug of choice and with minimal comorbidities completed semi-structured interviews, self-report questionnaires, and measures of neurocognitive functioning, with decision-making accessed via the Iowa Gambling Task (IGT), episodic memory via the Hopkins Verbal Learning Test – Revised (HVLT) and problems from cannabis use with the Marijuana Problems Scale. Results Strong relationships were observed between amount of cannabis use (lifetime, 12-month, and 30-day) and problems reported from use, but only among participants with Low (impaired) decision-making (R2 = .39 to .51; p < .01). No significant relationships were observed among those with better (low average to high average) decision-making performance (p > .05). In contrast, episodic memory performance was not a significant moderator of the relationship between amount of cannabis use and cannabis problems (p > .05). Conclusions Cannabis users with poor decision-making may be at greater risk for experiencing significant negative consequences from their cannabis use. Our results lend further support to emerging evidence of decision-making as a risk factor for addiction and extend these findings to cannabis users. PMID:26199058

Recent Patterns in Shared Decision Making for Prostate-Specific Antigen Testing in the United States.

PubMed

Fedewa, Stacey A; Gansler, Ted; Smith, Robert; Sauer, Ann Goding; Wender, Richard; Brawley, Otis W; Jemal, Ahmedin

2018-03-01

Previous studies report infrequent use of shared decision making for prostate-specific antigen (PSA) testing. It is unknown whether this pattern has changed recently considering increased emphasis on shared decision making in prostate cancer screening recommendations. Thus, the objective of this study is to examine recent changes in shared decision making. We conducted a retrospective cross-sectional study among men aged 50 years and older in the United States using 2010 and 2015 National Health Interview Survey (NHIS) data (n = 9,598). Changes in receipt of shared decision making were expressed as adjusted prevalence ratios (aPR) and 95% confidence intervals (CI). Analyses were stratified on PSA testing (recent [in the past year] or no testing). Elements of shared decision making assessed included the patient being informed about the advantages only, advantages and disadvantages, and full shared decision making (advantages, disadvantages, and uncertainties). Among men with recent PSA testing, 58.5% and 62.6% reported having received ≥1 element of shared decision making in 2010 and 2015, respectively ( P = .054, aPR = 1.04; 95% CI, 0.98-1.11). Between 2010 and 2015, being told only about the advantages of PSA testing significantly declined (aPR = 0.82; 95% CI, 0.71-0.96) and full shared decision making prevalence significantly increased (aPR = 1.51; 95% CI, 1.28-1.79) in recently tested men. Among men without prior PSA testing, 10% reported ≥1 element of shared decision making, which did not change with time. Between 2010 and 2015, there was no increase in shared decision making among men with recent PSA testing though there was a shift away from only being told about the advantages of PSA testing towards full shared decision making. Many men receiving PSA testing did not receive shared decision making. © 2018 Annals of Family Medicine, Inc.

Dynamic-Type Ice Thermal Storage Systems

NASA Astrophysics Data System (ADS)

Ohira, Akiyoshi

This paper deals with reviews for research and development of a dynamic-type ice thermal storage system. This system has three main features. First, the ice thermal storage tank and the ice generator are separate. Second, ice is transported to the tank from the ice generator by water or air. Third, the ice making and melting processes are operated at the same time. Outlet water temperature from the dynamic-type ice thermal storage tank remains low for a longer time. In this paper, dynamic-Type ice thermal storage systems are divided into three parts: the ice making part, the ice transport part, and the cold energy release part. Each part is reviewed separately.

Developmental changes and individual differences in risk and perspective taking in adolescence.

PubMed

Crone, Eveline A; Bullens, L; van der Plas, E A A; Kijkuit, E J; Zelazo, P D

2008-01-01

Despite the assumed prevalence of risk-taking behavior in adolescence, the laboratory evidence of risk taking remains scarce, and the individual variation poorly understood. Drawing from neuroscience studies, we tested whether risk and reward orientation are influenced by the perspective that adolescents take when making risky decisions. Perspective taking was manipulated by cuing participants prior to each choice whether the decision was made for "self," or from the perspective of an "other" (the experimenter in Experiment 1; a hypothetical peer in Experiment 2). In Experiment 1, we show a developmental decrease in risk-taking behavior across different stages of adolescence. In addition, all age groups made fewer risky choices for the experimenter, but the difference between self and other was larger in early adolescence. In Experiment 2, we show that high sensation-seeking (SS) adolescents make more risky choices than low SS adolescents, but both groups make a similar differentiation for other individuals (low risk-taking or high risk-taking peers). Together, the results show that younger adolescents and high SS adolescents make more risky choices for themselves, but can appreciate that others may make fewer risky choices. The developmental change toward more rational decisions versus emotional, impulsive decisions may reflect, in part, more efficient integration of others' perspectives into one's decision making. These developmental results are discussed regarding brain systems important for risk taking and perspective taking.

The quality of instruments to assess the process of shared decision making: A systematic review.

PubMed

Gärtner, Fania R; Bomhof-Roordink, Hanna; Smith, Ian P; Scholl, Isabelle; Stiggelbout, Anne M; Pieterse, Arwen H

2018-01-01

To inventory instruments assessing the process of shared decision making and appraise their measurement quality, taking into account the methodological quality of their validation studies. In a systematic review we searched seven databases (PubMed, Embase, Emcare, Cochrane, PsycINFO, Web of Science, Academic Search Premier) for studies investigating instruments measuring the process of shared decision making. Per identified instrument, we assessed the level of evidence separately for 10 measurement properties following a three-step procedure: 1) appraisal of the methodological quality using the COnsensus-based Standards for the selection of health status Measurement INstruments (COSMIN) checklist, 2) appraisal of the psychometric quality of the measurement property using three possible quality scores, 3) best-evidence synthesis based on the number of studies, their methodological and psychometrical quality, and the direction and consistency of the results. The study protocol was registered at PROSPERO: CRD42015023397. We included 51 articles describing the development and/or evaluation of 40 shared decision-making process instruments: 16 patient questionnaires, 4 provider questionnaires, 18 coding schemes and 2 instruments measuring multiple perspectives. There is an overall lack of evidence for their measurement quality, either because validation is missing or methods are poor. The best-evidence synthesis indicated positive results for a major part of instruments for content validity (50%) and structural validity (53%) if these were evaluated, but negative results for a major part of instruments when inter-rater reliability (47%) and hypotheses testing (59%) were evaluated. Due to the lack of evidence on measurement quality, the choice for the most appropriate instrument can best be based on the instrument's content and characteristics such as the perspective that they assess. We recommend refinement and validation of existing instruments, and the use of COSMIN-guidelines to help guarantee high-quality evaluations.

Manufacture of mold of polymeric composite water pipe reinforced charcoal

NASA Astrophysics Data System (ADS)

Zulfikar; Misdawati; Idris, M.; Nasution, F. K.; Harahap, U. N.; Simanjuntak, R. K.; Jufrizal; Pranoto, S.

2018-03-01

In general, household wastewater pipelines currently use thermoplastic pipes of Polyvinyl Chloride (PVC). This material is known to be not high heat resistant, contains hazardous chemicals (toxins), relatively inhospitable, and relatively more expensive. Therefore, researchers make innovations utilizing natural materials in the form of wood charcoal as the basic material of making the water pipe. Making this pipe requires a simple mold design that can be worked in the scale of household and intermediate industries. This research aims to produce water pipe mold with simple design, easy to do, and making time relatively short. Some considerations for molding materials are weight of mold, ease of raw material, strong, sturdy, and able to cast. Pipe molds are grouped into 4 (four) main parts, including: outer diameter pipe molding, pipe inside diameter, pipe holder, and pipe alignment control. Some materials have been tested as raw materials for outer diameter of pipes, such as wood, iron / steel, cement, and thermoset. The best results are obtained on thermoset material, where the process of disassembling is easier and the resulting mold weight is relatively lighter. For the inside diameter of the pipe is used stainless steel, because in addition to be resistant to chemical processes that occur, in this part of the mold must hold the press load due to shrinkage of raw materials of the pipe during the process of hardening (polymerization). Therefore, it needs high pressure resistant material and does not blend with the raw material of the pipe. The base of the mold is made of stainless steel material because it must be resistant to corrosion due to chemical processes. As for the adjustment of the pipe is made of ST 37 carbon steel, because its function is only as a regulator of the alignment of the pipe structure.

The study of memory and executive dysfunction in patients infected with Helicobacter pylori.

PubMed

Rezvani, Farzaneh; Sayadnasiri, Mohammad; Rezaei, Omid

2017-11-01

Background Infectious agents are considered as potential causes of Alzheimer's disease. Recently, evidence of a high prevalence of Helicobacter pylori (H. pylori) infection in patients with Alzheimer's disease has been observed. The aim of this study was to investigate memory and executive function in H. pylori positive persons not suffering from Alzheimer's or other marked cognitive disorders. Methods This is a cross-sectional study. A total 140 participants were selected using purposive sampling from the patients within the age group of 18-60 years old at Fayyaz Bakhsh Hospital, Tehran in spring 2016. The participants were divided into two groups of H. pylori positive and negative according to results of the serologic tests to measure the levels of specific antibodies of IgA and IgG against H. pylori using ELISA method. They were subsequently assessed using two tests of Trail Making (TMT) part A and B and Wechsler Memory Scale - Third Edition. Data were analyzed using independent t-test and chi-square. The level of significance was considered P-value ≤ 0.05. Results Out of 140 participants, there were 41 male (29.3%) and 99 female (70.7%) among which 84 patients (60%) suffered from H. pylori infection (seropositive) and 56 patients (40%) were not infected. Comparison of the results using independent t-test showed a significant difference (P = 0.006) between the memory scores of patients (M: 106, SD: 8.12) and healthy ones (M: 112, SD: 1.12). In addition, the executive function showed there is a significant difference in the executive ability of seropositive individuals in the two age groups of 20-50 years old (Part A: M: 1.36, SD: 7.11, and Part B: M: 8.8, SD: 8.25 p = 0.01) and over 50 years old (Part A: M: 55, SD: 8.20, and Part B: M: 106, SD: 7.22, p = 0.009). Conclusion The results of this study showed that the infected patients have a lower cognitive performance in comparison to healthy individuals. In other words, H. pylori infection increases the prevalence of memory and executive dysfunction.

Numerical investigation of tube hyroforming of TWT using Corner Fill Test

NASA Astrophysics Data System (ADS)

Zribi, Temim; Khalfallah, Ali

2018-05-01

Tube hydroforming presents a very good alternative to conventional forming processes for obtaining good quality mechanical parts used in several industrial fields, such as the automotive and aerospace sectors. Research in the field of tube hydroforming is aimed at improving the formability, stiffness and weight reduction of manufactured parts using this process. In recent years, a new method of hydroforming appears; it consists of deforming parts made from welded tubes and having different thicknesses. This technique which contributes to the weight reduction of the hydroformed tubes is a good alternative to the conventional tube hydroforming. This technique makes it possible to build rigid and light structures with a reduced cost. However, it is possible to improve the weight reduction by using dissimilar tailor welded tubes (TWT). This paper is a first attempt to analyze by numerical simulation the behavior of TWT hydroformed in square cross section dies, commonly called (Corner Fill Test). Considered tubes are composed of two materials assembled by butt welding. The present analysis will focus on the effect of loading paths on the formability of the structure by determining the change in thickness in several sections of the part. A comparison between the results obtained by hydroforming the butt joint of tubes made of dissimilar materials and those obtained using single-material tube is achieved. Numerical calculations show that the bi-material welded tube has better thinning resistance and a more even thickness distribution in the circumferential directions when compared to the single-material tube.

Shared decision making in the United States: policy and implementation activity on multiple fronts.

PubMed

Frosch, Dominick L; Moulton, Benjamin W; Wexler, Richard M; Holmes-Rovner, Margaret; Volk, Robert J; Levin, Carrie A

2011-01-01

Shared decision making in the United States has become an important element in health policy debates. The recently passed federal health care reform legislation includes several key provisions related to shared decision making (SDM) and patient decision support. Several states have passed or are considering legislation that incorporates SDM as a key component of improved health care provision. Research on SDM is funded by a range of public and private organizations. Non-profit, for-profit, academic and government organizations are developing decision support interventions for numerous conditions. Some interventions are publicly available; others are distributed to patients through health insurance and healthcare providers. A significant number of clinical implementation projects are underway to test and evaluate different ways of incorporating SDM and patient decision support into routine clinical care. Numerous professional organizations are advocating for SDM and social networking efforts are increasing their advocacy as well. Policy makers are intrigued by the potential of SDM to improve health care provision and potentially lower costs. The role of shared decision making in policy and practice will be part of the larger health care reform debate. 2011. Published by Elsevier GmbH.

Rational's experience using Ada for very large systems

NASA Technical Reports Server (NTRS)

Archer, James E., Jr.; Devlin, Michael T.

1986-01-01

The experience using the Rational Environment has confirmed the advantages forseen when the project was started. Interactive syntatic and semantic information makes a tremendous difference in the ease of constructing programs and making changes to them. The ability to follow semantic references makes it easier to understand exisiting programs and the impact of changes. The integrated debugger makes it much easier to find bugs and test fixes quickly. Taken together, these facilites have helped greatly in reducing the impact of ongoing maintenance of the ability to produce a new code. Similar improvements are anticipated as the same level of integration and interactivity are achieved for configuration management and version control. The environment has also proven useful in introducing personnel to the project and existing personnel to new parts of the system. Personnel benefit from the assistance with syntax and semantics; everyone benefits from the ability to traverse and understand the structure of unfamiliar software. It is often possible for someone completely unfamiliar with a body of code to use these facilities, to understand it well enough to successfully with a body of code to use these facilities to understand it well enough to successfully diagnose and fix bugs in a matter of minutes.

Evaluation of Mycology Laboratory Proficiency Testing

PubMed Central

Reilly, Andrew A.; Salkin, Ira F.; McGinnis, Michael R.; Gromadzki, Sally; Pasarell, Lester; Kemna, Maggi; Higgins, Nancy; Salfinger, Max

1999-01-01

Changes over the last decade in overt proficiency testing (OPT) regulations have been ostensibly directed at improving laboratory performance on patient samples. However, the overt (unblinded) format of the tests and regulatory penalties associated with incorrect values allow and encourage laboratorians to take extra precautions with OPT analytes. As a result OPT may measure optimal laboratory performance instead of the intended target of typical performance attained during routine patient testing. This study addresses this issue by evaluating medical mycology OPT and comparing its fungal specimen identification error rates to those obtained in a covert (blinded) proficiency testing (CPT) program. Identifications from 188 laboratories participating in the New York State mycology OPT from 1982 to 1994 were compared with the identifications of the same fungi recovered from patient specimens in 1989 and 1994 as part of the routine procedures of 88 of these laboratories. The consistency in the identification of OPT specimens was sufficient to make accurate predictions of OPT error rates. However, while the error rates in OPT and CPT were similar for Candida albicans, significantly higher error rates were found in CPT for Candida tropicalis, Candida glabrata, and other common pathogenic fungi. These differences may, in part, be due to OPT’s use of ideal organism representatives cultured under optimum growth conditions. This difference, as well as the organism-dependent error rate differences, reflects the limitations of OPT as a means of assessing the quality of routine laboratory performance in medical mycology. PMID:10364601

The Use of Variants of the Trail Making Test in Serial Assessment: A Construct Validity Study

ERIC Educational Resources Information Center

Atkinson, Thomas M.; Ryan, Jeanne P.

2008-01-01

The construct validity of three variants of the Trail Making Test was investigated using 162 undergraduate psychology students. During a 3-week period, the Trail Making Test of the Delis-Kaplan Executive Function System, Comprehensive Trail Making Test, and Connections Task were administered in six possible orders. Using confirmatory factor…

The Dilution Effect and Information Integration in Perceptual Decision Making

PubMed Central

Hotaling, Jared M.; Cohen, Andrew L.; Shiffrin, Richard M.; Busemeyer, Jerome R.

2015-01-01

In cognitive science there is a seeming paradox: On the one hand, studies of human judgment and decision making have repeatedly shown that people systematically violate optimal behavior when integrating information from multiple sources. On the other hand, optimal models, often Bayesian, have been successful at accounting for information integration in fields such as categorization, memory, and perception. This apparent conflict could be due, in part, to different materials and designs that lead to differences in the nature of processing. Stimuli that require controlled integration of information, such as the quantitative or linguistic information (commonly found in judgment studies), may lead to suboptimal performance. In contrast, perceptual stimuli may lend themselves to automatic processing, resulting in integration that is closer to optimal. We tested this hypothesis with an experiment in which participants categorized faces based on resemblance to a family patriarch. The amount of evidence contained in the top and bottom halves of each test face was independently manipulated. These data allow us to investigate a canonical example of sub-optimal information integration from the judgment and decision making literature, the dilution effect. Splitting the top and bottom halves of a face, a manipulation meant to encourage controlled integration of information, produced farther from optimal behavior and larger dilution effects. The Multi-component Information Accumulation model, a hybrid optimal/averaging model of information integration, successfully accounts for key accuracy, response time, and dilution effects. PMID:26406323

The Dilution Effect and Information Integration in Perceptual Decision Making.

PubMed

Hotaling, Jared M; Cohen, Andrew L; Shiffrin, Richard M; Busemeyer, Jerome R

2015-01-01

In cognitive science there is a seeming paradox: On the one hand, studies of human judgment and decision making have repeatedly shown that people systematically violate optimal behavior when integrating information from multiple sources. On the other hand, optimal models, often Bayesian, have been successful at accounting for information integration in fields such as categorization, memory, and perception. This apparent conflict could be due, in part, to different materials and designs that lead to differences in the nature of processing. Stimuli that require controlled integration of information, such as the quantitative or linguistic information (commonly found in judgment studies), may lead to suboptimal performance. In contrast, perceptual stimuli may lend themselves to automatic processing, resulting in integration that is closer to optimal. We tested this hypothesis with an experiment in which participants categorized faces based on resemblance to a family patriarch. The amount of evidence contained in the top and bottom halves of each test face was independently manipulated. These data allow us to investigate a canonical example of sub-optimal information integration from the judgment and decision making literature, the dilution effect. Splitting the top and bottom halves of a face, a manipulation meant to encourage controlled integration of information, produced farther from optimal behavior and larger dilution effects. The Multi-component Information Accumulation model, a hybrid optimal/averaging model of information integration, successfully accounts for key accuracy, response time, and dilution effects.

What ethical and legal principles should guide the genotyping of children as part of a personalised screening programme for common cancer?

PubMed

Hall, Alison Elizabeth; Chowdhury, Susmita; Pashayan, Nora; Hallowell, Nina; Pharoah, Paul; Burton, Hilary

2014-03-01

Increased knowledge of the gene-disease associations contributing to common cancer development raises the prospect of population stratification by genotype and other risk factors. Individual risk assessments could be used to target interventions such as screening, treatment and health education. Genotyping neonates, infants or young children as part of a systematic programme would improve coverage and uptake, and facilitate a screening package that maximises potential benefits and minimises harms including overdiagnosis. This paper explores the potential justifications and risks of genotyping children for genetic variants associated with common cancer development within a personalised screening programme. It identifies the ethical and legal principles that might guide population genotyping where the predictive value of the testing is modest and associated risks might arise in the future, and considers the standards required by population screening programme validity measures (such as the Wilson and Jungner criteria including cost-effectiveness and equitable access). These are distinguished from the normative principles underpinning predictive genetic testing of children for adult-onset diseases-namely, to make best-interests judgements and to preserve autonomy. While the case for population-based genotyping of neonates or young children has not yet been made, the justifications for this approach are likely to become increasingly compelling. A modified evaluative and normative framework should be developed, capturing elements from individualistic and population-based approaches. This should emphasise proper communication and genuine parental consent or informed choice, while recognising the challenges associated with making unsolicited approaches to an asymptomatic group. Such a framework would be strengthened by complementary empirical research.

New pediatric vision screener, part II: electronics, software, signal processing and validation.

PubMed

Gramatikov, Boris I; Irsch, Kristina; Wu, Yi-Kai; Guyton, David L

2016-02-04

We have developed an improved pediatric vision screener (PVS) that can reliably detect central fixation, eye alignment and focus. The instrument identifies risk factors for amblyopia, namely eye misalignment and defocus. The device uses the birefringence of the human fovea (the most sensitive part of the retina). The optics have been reported in more detail previously. The present article focuses on the electronics and the analysis algorithms used. The objective of this study was to optimize the analog design, data acquisition, noise suppression techniques, the classification algorithms and the decision making thresholds, as well as to validate the performance of the research instrument on an initial group of young test subjects-18 patients with known vision abnormalities (eight male and 10 female), ages 4-25 (only one above 18) and 19 controls with proven lack of vision issues. Four statistical methods were used to derive decision making thresholds that would best separate patients with abnormalities from controls. Sensitivity and specificity were calculated for each method, and the most suitable one was selected. Both the central fixation and the focus detection criteria worked robustly and allowed reliable separation between normal test subjects and symptomatic subjects. The sensitivity of the instrument was 100 % for both central fixation and focus detection. The specificity was 100 % for central fixation and 89.5 % for focus detection. The overall sensitivity was 100 % and the overall specificity was 94.7 %. Despite the relatively small initial sample size, we believe that the PVS instrument design, the analysis methods employed, and the device as a whole, will prove valuable for mass screening of children.

Ground-water areas and well logs, central Sevier Valley, Utah

USGS Publications Warehouse

Young, Richard A.

1960-01-01

Between September 1959 and June 1960 the United States Geological Survey and the Utah State Engineer, with financial assistance from Garfield, Millard, Piute, Sanpete, and Sevier Counties and from local water-users’ associations, cooperated in an investigation to determine the structural framework of the central Sevier Valley and to evaluate the valley’s ground-water potential. An important aspect of the study was the drilling of 22 test holes under private contract. These data and other data collected during the course of the larger ground-water investigation of which the test drilling was a part will be evaluated in a report on the geology and ground-water resources of the central Sevier Valley. The present report has been prepared to make available the logs of test holes and to describe in general terms the availability of ground water in the different areas of the valley.

Invited Commentary: Can Issues With Reproducibility in Science Be Blamed on Hypothesis Testing?

PubMed

Weinberg, Clarice R

2017-09-15

In the accompanying article (Am J Epidemiol. 2017;186(6):646-647), Dr. Timothy Lash makes a forceful case that the problems with reproducibility in science stem from our "culture" of null hypothesis significance testing. He notes that when attention is selectively given to statistically significant findings, the estimated effects will be systematically biased away from the null. Here I revisit the recent history of genetic epidemiology and argue for retaining statistical testing as an important part of the tool kit. Particularly when many factors are considered in an agnostic way, in what Lash calls "innovative" research, investigators need a selection strategy to identify which findings are most likely to be genuine, and hence worthy of further study. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health 2017. This work is written by (a) US Government employee(s) and is in the public domain in the US.

The Last Big Bang

DOE Office of Scientific and Technical Information (OSTI.GOV)

McGuire, Austin D.; Meade, Roger Allen

As one of the very few people in the world to give the “go/no go” decision to detonate a nuclear device, Austin “Mac” McGuire holds a very special place in the history of both the Los Alamos National Laboratory and the world. As Commander of Joint Task Force Unit 8.1.1, on Christmas Island in the spring and summer of 1962, Mac directed the Los Alamos data collection efforts for twelve of the last atmospheric nuclear detonations conducted by the United States. Since data collection was at the heart of nuclear weapon testing, it fell to Mac to make the ultimatemore » decision to detonate each test device. He calls his experience THE LAST BIG BANG, since these tests, part of Operation Dominic, were characterized by the dramatic displays of the heat, light, and sounds unique to atmospheric nuclear detonations – never, perhaps, to be witnessed again.« less

Developing interpretable models with optimized set reduction for identifying high risk software components

NASA Technical Reports Server (NTRS)

Briand, Lionel C.; Basili, Victor R.; Hetmanski, Christopher J.

1993-01-01

Applying equal testing and verification effort to all parts of a software system is not very efficient, especially when resources are limited and scheduling is tight. Therefore, one needs to be able to differentiate low/high fault frequency components so that testing/verification effort can be concentrated where needed. Such a strategy is expected to detect more faults and thus improve the resulting reliability of the overall system. This paper presents the Optimized Set Reduction approach for constructing such models, intended to fulfill specific software engineering needs. Our approach to classification is to measure the software system and build multivariate stochastic models for predicting high risk system components. We present experimental results obtained by classifying Ada components into two classes: is or is not likely to generate faults during system and acceptance test. Also, we evaluate the accuracy of the model and the insights it provides into the error making process.

Centroid Detector Assembly for the AXAF-I Alignment Test System

NASA Technical Reports Server (NTRS)

Glenn, Paul

1995-01-01

The High Resolution Mirror Assembly (HRMA) of the Advanced X-ray Astrophysics Facility (imaging) (AXAF-I) consists of four nested paraboloids and four nested hyperboloids, all of meter-class size, and all of which are to be assembled and aligned in a special 15 meter tower at Eastman Kodak Company in Rochester, NY. The goals of the alignment are (1) to make the images of the four telescopes coincident; (2) to remove coma from each image individually; and (3) to control and determine the final position of the composite focus. This will be accomplished by the HRMA Aligment Test System (HATS) which is essentially a scanning Hartmann test system. The scanning laser source and the focal plane of the HATS are part of the Centroid Detector Assembly (CDA) which also includes processing electronics and software. In this paper we discuss the design and the measured performance of the CDA.

KSC-2010-5773

NASA Image and Video Library

2010-12-03

CAPE CANAVERAL, Fla. -- The SpaceX Falcon 9 rocket static fire test on Space Launch Complex-40 at Cape Canaveral Air Force Station was aborted at T minus 1.1 seconds due to high engine chamber pressure. During the test, all nine Merlin engines, which use rocket-grade kerosene and liquid oxygen to produce 1 million pounds of thrust, are expected to fire at once. After the test, SpaceX will conduct a thorough review of all data as engineers make final preparations for the first launch of the Commercial Orbital Transportation Services (COTS) Dragon spacecraft to low Earth orbit atop the Falcon 9. This first stage firing is part of a full launch dress rehearsal, which will end after the engines fire at full power for two seconds, with only the hold-down system restraining the rocket from flight. Photo credit: NASA/Tony Gray and Kevin O'Connell

KSC-2010-5770

NASA Image and Video Library

2010-12-03

CAPE CANAVERAL, Fla. -- The SpaceX Falcon 9 rocket static fire test on Space Launch Complex-40 at Cape Canaveral Air Force Station was aborted at T minus 1.1 seconds due to high engine chamber pressure. During the test, all nine Merlin engines, which use rocket-grade kerosene and liquid oxygen to produce 1 million pounds of thrust, are expected to fire at once. After the test, SpaceX will conduct a thorough review of all data as engineers make final preparations for the first launch of the Commercial Orbital Transportation Services (COTS) Dragon spacecraft to low Earth orbit atop the Falcon 9. This first stage firing is part of a full launch dress rehearsal, which will end after the engines fire at full power for two seconds, with only the hold-down system restraining the rocket from flight. Photo credit: NASA/Tony Gray and Kevin O'Connell

KSC-2010-5771

NASA Image and Video Library

2010-12-03

CAPE CANAVERAL, Fla. -- The SpaceX Falcon 9 rocket static fire test on Space Launch Complex-40 at Cape Canaveral Air Force Station was aborted at T minus 1.1 seconds due to high engine chamber pressure. During the test, all nine Merlin engines, which use rocket-grade kerosene and liquid oxygen to produce 1 million pounds of thrust, are expected to fire at once. After the test, SpaceX will conduct a thorough review of all data as engineers make final preparations for the first launch of the Commercial Orbital Transportation Services (COTS) Dragon spacecraft to low Earth orbit atop the Falcon 9. This first stage firing is part of a full launch dress rehearsal, which will end after the engines fire at full power for two seconds, with only the hold-down system restraining the rocket from flight. Photo credit: NASA/Tony Gray and Kevin O'Connell

Conception of a course for professional training and education in the field of computer and mobile forensics, part III: network forensics and penetration testing

NASA Astrophysics Data System (ADS)

Kröger, Knut; Creutzburg, Reiner

2014-02-01

IT security and computer forensics are important components in the information technology. From year to year, incidents and crimes increase that target IT systems or were done with their help. More and more companies and authorities have security problems in their own IT infrastructure. To respond to these incidents professionally, it is important to have well trained staff. The fact that many agencies and companies work with very sensitive data make it necessary to further train the own employees in the field of network forensics and penetration testing. Motivated by these facts, this paper - a continuation of a paper of January 2012 [1], which showed the conception of a course for professional training and education in the field of computer and mobile forensics - addresses the practical implementation important relationships of network forensic and penetration testing.

Experimental investigation of basic oxygen furnace slag used as aggregate in asphalt mixture.

PubMed

Xue, Yongjie; Wu, Shaopeng; Hou, Haobo; Zha, Jin

2006-11-16

Chinese researchers have commenced a great deal of researches on the development of application fields of basic oxygen steel making furnace slag (BOF slag) for many years. Lots of new applications and properties have been found, but few of them in asphalt mixture of road construction engineering. This paper discussed the feasibility of BOF steel slag used as aggregate in asphalt pavement by two points of view including BOF steel slag's physical and micro-properties as well as steel slag asphalt materials and pavement performances. For the former part, this paper mainly concerned the mechanochemistry and physical changes of the steel slag and studied it by performing XRD, SEM, TG and mercury porosimeter analysis and testing method. In the second part, this paper intended to use BOF steel slag as raw material, and design steel slag SMA mixture. By using traditional rutting test, soak wheel track and modified Lottman test, the high temperature stability and water resistance ability were tested. Single axes compression test and indirect tensile test were performed to evaluate the low temperature crack resistance performance and fatigue characteristic. Simultaneously, by observing steel slag SMA pavement which was paved successfully. A follow-up study to evaluate the performance of the experimental pavement confirmed that the experimental pavement was comparable with conventional asphalt pavement, even superior to the later in some aspects. All of above test results and analysis had only one main purpose that this paper validated the opinion that using BOF slag in asphalt concrete is feasible. So this paper suggested that treated and tested steel slag should be used in a more extensive range, especially in asphalt mixture paving projects in such an abundant steel slag resource region.

Thalassemia

MedlinePlus

... disorder that affects the way the body makes hemoglobin. Hemoglobin is the part of red blood cells that ... alpha globin and beta globin; these proteins make hemoglobin. In thalassemia, a gene that makes these proteins ...

Cross-Domain Analogies as Relating Derived Relations among Two Separate Relational Networks

PubMed Central

Ruiz, Francisco J; Luciano, Carmen

2011-01-01

Contemporary behavior analytic research is making headway in analyzing analogy as the establishment of a relation of coordination among common types of trained or derived relations. Previous studies have been focused on within-domain analogy. The current study expands previous research by analyzing cross-domain analogy as relating relations among separate relational networks and by correlating participants' performance with a standard measure of analogical reasoning. In two experiments, adult participants first completed general intelligence and analogical reasoning tests. Subsequently, they were exposed to a computerized conditional discrimination training procedure designed to create two relational networks, each consisting of two 3-member equivalence classes. The critical test was a two-part analogical test in which participants had to relate combinatorial relations of coordination and distinction between the two relational networks. In Experiment 1, combinatorial relations for each network were individually tested prior to analogical testing, but in Experiment 2 they were not. Across both experiments, 65% of participants passed the analogical test on the first attempt. Moreover, results from the training procedure were strongly correlated with the standard measure of analogical reasoning. PMID:21547072

Allium-test as a tool for toxicity testing of environmental radioactive-chemical mixtures

NASA Astrophysics Data System (ADS)

Oudalova, A. A.; Geras'kin, S. A.; Dikareva, N. S.; Pyatkova, S. V.

2017-01-01

Bioassay-based approaches have been propagated to assess toxicity of unknown mixtures of environmental contaminants, but it was rarely applied in cases of chemicals with radionuclides combinations. Two Allium-test studies were performed to assess environmental impact from potential sources of combined radioactive-chemical pollution. Study sites were located at nuclear waste storage facilities in European and in Far-Eastern parts of Russia. As environmental media under impact, waters from monitor wells and nearby water bodies were tested. Concentrations of some chemicals and radionuclides in the samples collected enhanced the permitted limits. Cytogenetic and cytotoxic effects were used as biological endpoints, namely, frequency and spectrum of chromosome aberrations and mitotic abnormalities in anatelophase cells as well as mitotic activity in Allium root tips. Sample points were revealed where waters have an enhanced mutagenic potential. The findings obtained could be used to optimize monitoring system and advance decision making on management and rehabilitation of industrial sites. The Allium-test could be recommended and applied as an effective tool for toxicity testing in case of combined contamination of environmental compartments with radionuclides and chemical compounds.

The impact of cognitive deficit on self-reported car crashes in ultra-octogenarian population: data of an Italian population-based study.

PubMed

Rozzini, Luca; Riva, Maddalena; Zanetti, Marina; Gottardi, Federica; Caratozzolo, Salvatore; Vicini Chilovi, Barbara; Trabucchi, Marco; Padovani, Alessandro

2013-06-01

To examine the usefulness of specific neurocognitive tests for predicting the crash involvement in ultra-octogenarian population. A total of 800 subjects (mean age 82.4 + 3.1 years) underwent a battery of neuropsychological tests. Global intellectual functioning was assessed using the Mini Mental State Examination, mental flexibility and information processing speed were assessed using the Trail Making Test parts A and B (TMT-A and TMT-B), long-term memory was evaluated with the short story, and visuo-spatial skills were tested with Clock Drawing Test. One year after this evaluation, 343 (43%) participants have been interviewed by a telephone call to know if they were currently driving and if they had a car crash during this period. Two hundred ninety-seven subjects had their driving license renewed and completed the follow-up 1 year after. Data shows that less than 11% of this group had a car crash during the first year of observation (Crash Involved). Older subjects involved in a car crash showed significant worse performances on TMT-B (TMT-B pathological Crash Involved vs. Noncrash Involved 47% vs. 27%; p = 0.02) and on short story (short story pathological Crash Involved vs. Noncrash Involved 19% vs. 5%; p = 0.02). Trail Making test B and short story have been demonstrated to provide a predictive value of driving performance of older people. Therefore, we suggest that a simple and standardized battery of neuropsychological tests, lasting about 30 min and administered by an experienced staff, is a good diagnostic instrument for risk prevention of driving activity of older drivers. Copyright © 2012 John Wiley & Sons, Ltd.

Hiding text in gray image using mapping technique

NASA Astrophysics Data System (ADS)

Hussein, Hussein L.; Abbass, Ahmed A.; Naji, Sinan A.; Al-augby, Salam; Lafta, Jasim H.

2018-05-01

In order to hide the significant and secret message inside a cover object, Steganography is considered as one of the most used technique because of its strength. This paper presents a new steganography technique that it is difficult to discover or break by a third party. The ASCII Mapping Technique (AMT) is used to create an encoded table by mapping the text message and matching some bits with that of the cover image. The system saves the character parts matching and the location of which part of the pixels. Then change the related flag from zero to one the for matched locations so that they cannot be used again to strength the technique and make it more secure. The proposed technique was tested and showed low computational cost with effective performance to be used for multi-purpose applications.

Reduced projection angles for binary tomography with particle aggregation.

PubMed

Al-Rifaie, Mohammad Majid; Blackwell, Tim

This paper extends particle aggregate reconstruction technique (PART), a reconstruction algorithm for binary tomography based on the movement of particles. PART supposes that pixel values are particles, and that particles diffuse through the image, staying together in regions of uniform pixel value known as aggregates. In this work, a variation of this algorithm is proposed and a focus is placed on reducing the number of projections and whether this impacts the reconstruction of images. The algorithm is tested on three phantoms of varying sizes and numbers of forward projections and compared to filtered back projection, a random search algorithm and to SART, a standard algebraic reconstruction method. It is shown that the proposed algorithm outperforms the aforementioned algorithms on small numbers of projections. This potentially makes the algorithm attractive in scenarios where collecting less projection data are inevitable.

KSC-08pd3440

NASA Image and Video Library

2008-10-29

CAPE CANAVERAL, Fla. – On Launch Pad 39A at NASA's Kennedy Space Center in Florida, STS-126 Mission Specialists (from left) Sandra Magnus, Shane Kimbrough and Heidemarie Stefanyshyn-Piper make their way to the slidewire baskets on the 195-foot level of the fixed service structure after taking part in a simulated countdown in space shuttle Endeavour. The crew is at Kennedy to take part in the Terminal Countdown Demonstration Test, which includes equipment familiarization, emergency exit training and the simulated countdown. On the STS-126 mission, space shuttle Endeavour's crew will deliver equipment and supplies to the International Space Station in preparation for expansion from a three- to six-person resident crew aboard the complex. The mission also will include four spacewalks to service the station’s Solar Alpha Rotary Joints. Endeavour is targeted to launch Nov. 14. Photo credit: NASA/Troy Cryder

Correlation analysis of the variation of weld seam and tensile strength in laser welding of galvanized steel

NASA Astrophysics Data System (ADS)

Sinha, Amit Kumar; Kim, Duck Young; Ceglarek, Darek

2013-10-01

Many advantages of laser welding technology such as high speed and non-contact welding make the use of the technology more attractive in the automotive industry. Many studies have been conducted to search the optimal welding condition experimentally that ensure the joining quality of laser welding that relies both on welding system configuration and welding parameter specification. Both non-destructive and destructive techniques, for example, ultrasonic inspection and tensile test are widely used in practice for estimating the joining quality. Non-destructive techniques are attractive as a rapid quality testing method despite relatively low accuracy. In this paper, we examine the relationship between the variation of weld seam and tensile shear strength in the laser welding of galvanized steel in a lap joint configuration in order to investigate the potential of the variation of weld seam as a joining quality estimator. From the experimental analysis, we identify a trend in between maximum tensile shear strength and the variation of weld seam that clearly supports the fact that laser welded parts having larger variation in the weld seam usually have lower tensile strength. The discovered relationship leads us to conclude that the variation of weld seam can be used as an indirect non-destructive testing method for estimating the tensile strength of the welded parts.

HARBO, a simple computer-aided observation method for recording work postures.

PubMed

Wiktorin, C; Mortimer, M; Ekenvall, L; Kilbom, A; Hjelm, E W

1995-12-01

The aim of the study was to present an observation method focusing on the positions of the hands relative to the body and to evaluate whether this simple observation technique gives a reliable estimate of the total time spent in each of five work postures during one workday. In the first part of the study the interobserver reliability of the observation method was tested with eight blue-collar workers. In the second part the observed time spent with work above the shoulder level was tested in relation to an upper-arm position analyzer, and observed time spent in work below knuckle level was tested in relation to a trunk flexion analyzer, both with 72 blue-collar workers. The interobserver reliability for full-day registrations was high. The intraclass correlation coefficients ranged from 0.99 to 1.00. The observed duration of work with hands above shoulder level correlated well with the measured duration of pronounced arm elevation (> 75 degrees). The product moment correlation coefficient was 0.97. The observed duration of work with hands below knuckle level correlated well with the measured duration of pronounced trunk flexion angles (> 40 degrees). The product moment correlation coefficient was 0.98. The present observation method, designed to make postural observations continuously for several hours, is easy to learn and seems reliable.

Northern part, Ten Mile and Taunton River basins

USGS Publications Warehouse

Williams, John R.; Willey, Richard E.

1967-01-01

This report is one of two prepared by the Geological Survey for the Water Resources Commission. The principal purpose of this report is to make available the basic data on which the other, a map showing availability of ground water, is based. This basic-data report also can be used by engineers, planners, and others interested in or responsible for water-resources planning to determine the materials to be encountered (tables 3 and 4) and the yields which may be obtained from wells and test holes (tables 1 and 2) in the stratified sand and gravel that are the principal source of ground water and in bedrock. Partial and complete chemical analyses (tables 7 and 8) of these test holes and of some privately-owned wells provide information on the general quality of the water for domestic and other uses. A tabulation of existing municipal supplies, their capacity, production (table 5), and chemical quality of the water (table 6) may be used for regional planning purposes. Water-level measurements (figure 1) can be used to determine the annual fluctuations of the water table in certain types of materials. Seismic work (table 9) in the Canoe River valley, Norton, and test drilling with a power augur (tables 2 and 4) were done for the Geological Survey as  part of the investigation.

Design and Analysis of Solar Smartflower Simulation by Solidwork Program

NASA Astrophysics Data System (ADS)

Mulyana, Tatang; Sebayang, Darwin; Fajrina, Fildzah; Raihan; Faizal, M.

2018-03-01

The potential of solar energy that is so large in Indonesia can be a driving force for the use of renewable energy as a solution for energy needs. Government with the community can utilize and optimize this technology to increase the electrification ratio up to 100% in all corners of Indonesia. Because of its modular and practical nature, making this technology easy to apply. One of the latest imported products that have started to be offered and sold in Indonesia but not yet widely used for solar power generation is the kind of smartflower. Before using the product, it is of course very important and immediately to undertake an in-depth study of the utilization, use, maintenance, repair, component supply and fabrication. The best way to know the above is through a review of the design and simulation. To meet this need, this paper presents a solar-smartflower design and then simulated using the facilities available in the solidwork program. Solid simulation express is a tool that serves to create power simulation of a design part modelling. With the simulation is very helpful at all to reduce errors in making design. Accurate or not a design created is also influenced by several other factors such as material objects, the silent part of the part, and the load given. The simulation is static simulation and body battery drop test, and based on the results of this simulation is known that the design results have been very satisfactory.

The School Safety Handbook: Taking Action for Student and Staff Protection.

ERIC Educational Resources Information Center

Lane, Kenneth E., Ed.; Richardson, Michael D., Ed.; Van Berkum, Dennis W., Ed.

This collection of essays describes how communities can make their schools safe. The text is divided into four parts: "Roots of Violence"; "Legal Issues"; "Strategies for Making Schools Safe"; and "Conclusions and Recommendations." The chapters in part 1 include the following: "The Impact of Violence in Schools" (Donald F. DeMoulin);…

77 FR 4948 - Structure and Practices of the Video Relay Service Program; Telecommunications Relay Services and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-01

... difficult to detect on an ex post basis, particularly when comingled with legitimate minutes or submitted by... ``permit-but-disclose'' proceeding in accordance with the Commission's ex parte rules. Persons making ex... Sunshine period applies). Persons making oral ex parte presentations are reminded that memoranda...

3D Pit Stop Printing

ERIC Educational Resources Information Center

Wright, Lael; Shaw, Daniel; Gaidds, Kimberly; Lyman, Gregory; Sorey, Timothy

2018-01-01

Although solving an engineering design project problem with limited resources or structural capabilities of materials can be part of the challenge, students making their own parts can support creativity. The authors of this article found an exciting solution: 3D printers are not only one of several tools for making but also facilitate a creative…

Educational Decision-Making: Rationality and the Impact of Time

ERIC Educational Resources Information Center

Adshead, Lesley; Jamieson, Anne

2008-01-01

This paper explores educational decision-making within a life course perspective. It draws on interviews carried out with 34 people, ages 30-81, as part of a longitudinal study into educational experiences of part-time mature students in continuing education at a London university. It considers to what extent their decisions about study are…

VIEW OF MICROMACHINING, HIGH PRECISION EQUIPMENT USED TO CUSTOM MAKE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF MICRO-MACHINING, HIGH PRECISION EQUIPMENT USED TO CUSTOM MAKE SMALL PARTS. LUMPS OF CLAY; SHOWN IN THE PHOTOGRAPH, WERE USED TO STABILIZE PARTS BEING MACHINED. (11/1/87) - Rocky Flats Plant, Stainless Steel & Non-Nuclear Components Manufacturing, Southeast corner of intersection of Cottonwood & Third Avenues, Golden, Jefferson County, CO

Embedded object concept with a telepresence robot system

NASA Astrophysics Data System (ADS)

Vallius, Tero; Röning, Juha

2005-10-01

This paper presents the Embedded Object Concept (EOC) and a telepresence robot system which is a test case for the EOC. The EOC utilizes common object-oriented methods used in software by applying them to combined Lego-like software-hardware entities. These entities represent objects in object-oriented design methods, and they are the building blocks of embedded systems. The goal of the EOC is to make the designing of embedded systems faster and easier. This concept enables people without comprehensive knowledge in electronics design to create new embedded systems, and for experts it shortens the design time of new embedded systems. We present the current status of the EOC, including two generations of embedded objects named Atomi objects. The first generation of the Atomi objects has been tested with different applications, and found to be functional, but not optimal. The second generation aims to correct the issues found with the first generation, and it is being tested in a relatively complex test case. The test case is a telepresence robot consisting of a two wheeled human height robot and its computer counter part. The robot has been constructed using incremental device development, which is made possible by the architecture of the EOC. The robot contains video and audio exchange capability, and a controlling and balancing system for driving with two wheels. The robot is built in two versions, the first consisting of a PDA device and Atomi objects, and the second consisting of only Atomi objects. The robot is currently incomplete, but for the most part it has been successfully tested.

24 CFR 55.20 - Decision making process.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Decision making process. 55.20... Decision making process. The decision making process for compliance with this part contains eight steps... decision making process are: (a) Step 1. Determine whether the proposed action is located in a 100-year...

Attrition from Web-Based Cognitive Testing: A Repeated Measures Comparison of Gamification Techniques.

PubMed

Lumsden, Jim; Skinner, Andy; Coyle, David; Lawrence, Natalia; Munafo, Marcus

2017-11-22

The prospect of assessing cognition longitudinally and remotely is attractive to researchers, health practitioners, and pharmaceutical companies alike. However, such repeated testing regimes place a considerable burden on participants, and with cognitive tasks typically being regarded as effortful and unengaging, these studies may experience high levels of participant attrition. One potential solution is to gamify these tasks to make them more engaging: increasing participant willingness to take part and reducing attrition. However, such an approach must balance task validity with the introduction of entertaining gamelike elements. This study aims to investigate the effects of gamelike features on participant attrition using a between-subjects, longitudinal Web-based testing study. We used three variants of a common cognitive task, the Stop Signal Task (SST), with a single gamelike feature in each: one variant where points were rewarded for performing optimally; another where the task was given a graphical theme; and a third variant, which was a standard SST and served as a control condition. Participants completed four compulsory test sessions over 4 consecutive days before entering a 6-day voluntary testing period where they faced a daily decision to either drop out or continue taking part. Participants were paid for each session they completed. A total of 482 participants signed up to take part in the study, with 265 completing the requisite four consecutive test sessions. No evidence of an effect of gamification on attrition was observed. A log-rank test showed no evidence of a difference in dropout rates between task variants (χ 2 2 =3.0, P=.22), and a one-way analysis of variance of the mean number of sessions completed per participant in each variant also showed no evidence of a difference (F 2,262 =1.534, P=.21, partial η 2 =0.012). Our findings raise doubts about the ability of gamification to reduce attrition from longitudinal cognitive testing studies. ©Jim Lumsden, Andy Skinner, David Coyle, Natalia Lawrence, Marcus Munafo. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 22.11.2017.

How to succeed in science: a concise guide for young biomedical scientists. Part II: making discoveries

PubMed Central

Yewdell, Jonathan W.

2009-01-01

Making discoveries is the most important part of being a scientist, and also the most fun. Young scientists need to develop the experimental and mental skill sets that enable them to make discoveries, including how to recognize and exploit serendipity when it strikes. Here, I provide practical advice to young scientists on choosing a research topic, designing, performing and interpreting experiments and, last but not least, on maintaining your sanity in the process. PMID:18401347

How to succeed in science: a concise guide for young biomedical scientists. Part II: making discoveries.

PubMed

Yewdell, Jonathan W

2008-06-01

Making discoveries is the most important part of being a scientist, and also the most fun. Young scientists need to develop the experimental and mental skill sets that enable them to make discoveries, including how to recognize and exploit serendipity when it strikes. Here, I provide practical advice to young scientists on choosing a research topic, designing, performing and interpreting experiments and, last but not least, on maintaining your sanity in the process.

Finite Element Simulation for Analysing the Design and Testing of an Energy Absorption System

PubMed Central

Segade, Abraham; López-Campos, José A.; Fernández, José R.; Casarejos, Enrique; Vilán, José A.

2016-01-01

It is not uncommon to use profiles to act as energy absorption parts in vehicle safety systems. This work analyses an impact attenuator based on a simple design and discusses the use of a thermoplastic material. We present the design of the impact attenuator and a mechanical test for the prototype. We develop a simulation model using the finite element method and explicit dynamics, and we evaluate the most appropriate mesh size and integration for describing the test results. Finally, we consider the performance of different materials, metallic ones (steel AISI 4310, Aluminium 5083-O) and a thermoplastic foam (IMPAXX500™). This reflects the car industry’s interest in using new materials to make high-performance, low-mass energy absorbers. We show the strength of the models when it comes to providing reliable results for large deformations and strong non-linearities, and how they are highly correlated with respect to the test results both in value and behaviour. PMID:28773778

Autobiologies on YouTube: Narratives of Direct-to-Consumer Genetic Testing

PubMed Central

Harris, Anna; Kelly, Susan E.; Wyatt, Sally

2014-01-01

Despite a growing personal genomics market, little is known about how people engage with the possibilities offered by direct-to-consumer (DTC) genetic testing. In order to help address this gap, this study deploys narrative analysis of YouTube videos posted by individuals who have purchased DTC genetic testing for disease. Genetic testing is said to be contributing to new states of illness, where individuals may become “patients-in-waiting.” In the videos analyzed, we found a new form of storytelling about this ambiguous state of illness, which we refer to as autobiology. Autobiology – the study of, and story about, one's own biology – concerns narratives of sense-making through forms of biological practice, as well as wayfaring narratives which interweave genetic markers and family histories of disease. These autobiologies – part of a broader shift toward public stories about genetics and other healthcare technologies – exhibit playfulness, as well as being bound with consumerist practices. PMID:24772003

Executive Functioning of Combat Mild Traumatic Brain Injury.

PubMed

Gaines, Katy D; Soper, Henry V; Berenji, Gholam R

2016-01-01

This study investigates neuropsychological deficits in recently deployed veterans with mild traumatic brain injury (mTBI). Veterans discharged from 2007 to 2012 were recruited from Veterans Affairs clinics. Independent groups of participants with mTBI (n = 57) and those without TBI (n = 57) were administered the Beck Depression Inventory-II, Combat Exposure Scale, Word Memory Test, and the Self-Awareness of Deficits Interview. Neuropsychological instruments included the Rey-Osterrieth Complex Figure Test, Letter and Category Fluency, Trail-Making Test-Parts A and B, Christiansen H-abbreviated, Soper Neuropsychology Screen, Wechsler Memory Scale subtests Logical Memory I and II, and the Street Completion Test. The mTBI group performed significantly worse on all of the executive and nonexecutive measurements with the exception of Category Fluency, after controlling for age, depression effort, and combat exposure. Depression and combat exposure were greater for the mTBI group. The mTBI group scored poorer on effort, but only the Multiple Choice subtest was significant. The mTBI group had good awareness of their deficits.

Cosmological constraints on neutrinos with Planck data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spinelli, M.

2015-07-15

Neutrinos take part in the dance of the evolving Universe influencing its history from leptogenesis, to Big Bang nucleosynthesis, until late time structure formation. This makes cosmology, and in particular one of its primary observables the Cosmic Microwave Background (CMB), an unusual but valuable tool for testing Neutrino Physics. The best measurement to date of full-sky CMB anisotropies comes from the Planck satellite launched in 2009 by the European Space Agency (ESA) and successful follower of COBE and WMAP. Testing Planck data against precise theoretical predictions allow us to shed light on various interesting open questions such as the valuemore » of the absolute scale of neutrino masses or their energy density. We revise here the results concerning neutrinos obtained by the Planck Collaboration in the 2013 data release.« less

Alternative Green Solvents Project

NASA Technical Reports Server (NTRS)

Maloney, Phillip R.

2012-01-01

Necessary for safe and proper functioning of equipment. Mainly halogenated solvents. Tetrachloride, Trichloroethylene (TCE), CFC-113. No longer used due to regulatory/safety concerns. Precision Cleaning at KSC: Small % of total parts. Used for liquid oxygen (LOX) systems. Dual solvent process. Vertrel MCA (decafluoropentane (DFP) and trons-dichloroethylene) HFE-7100. DFP has long term environmental concerns. Project Goals: a) Identify potential replacements. b) 22 wet chemical processes. c) 3 alternative processes. d) Develop test procedures. e) Contamination and cleaning. f) Analysis. g) Use results to recommend alternative processes. Conclusions: a) No alternative matched Vertrel in this study. b) No clear second place solvent. c) Hydrocarbons- easy; Fluorinated greases- difficult. d) Fluorinated component may be needed in replacement solvent. e) Process may need to make up for shortcoming of the solvent. f) Plasma and SCC02 warrant further testing.

Automated Attitude Sensor Calibration: Progress and Plans

NASA Technical Reports Server (NTRS)

Sedlak, Joseph; Hashmall, Joseph

2004-01-01

This paper describes ongoing work a NASA/Goddard Space Flight Center to improve the quality of spacecraft attitude sensor calibration and reduce costs by automating parts of the calibration process. The new calibration software can autonomously preview data quality over a given time span, select a subset of the data for processing, perform the requested calibration, and output a report. This level of automation is currently being implemented for two specific applications: inertial reference unit (IRU) calibration and sensor alignment calibration. The IRU calibration utility makes use of a sequential version of the Davenport algorithm. This utility has been successfully tested with simulated and actual flight data. The alignment calibration is still in the early testing stage. Both utilities will be incorporated into the institutional attitude ground support system.

Workers in the VAB test SRB cables on STS-98 solid rocket boosters

NASA Technical Reports Server (NTRS)

2001-01-01

KENNEDY SPACE CENTER, Fla. -- NASA and United Space Alliance SRB technicians hook up solid rocket booster cables to a Cirris Signature Touch 1 cable tester. From left are Loren Atkinson and Steve Swichkow, with NASA, and Jeff Suter, with USA. The SRB is part of Space Shuttle Atlantis, rolled back from Launch Pad 39A in order to conduct tests on the cables. A prior extensive evaluation of NASA'''s SRB cable inventory on the shelf revealed conductor damage in four (of about 200) cables. Shuttle managers decided to prove the integrity of the system tunnel cables already on Atlantis before launching. Workers are conducting inspections, making continuity checks and conducting X-ray analysis on the cables. The launch has been rescheduled no earlier than Feb. 6.

Workers in the VAB test SRB cables on STS-98 solid rocket boosters

NASA Technical Reports Server (NTRS)

2001-01-01

KENNEDY SPACE CENTER, Fla. -- In the Vehicle Assembly Building, United Space Alliance SRB technician Frank Meyer pulls cables out of the solid rocket booster system tunnel. Cable end covers are in a box near his feet. The SRB is part of Space Shuttle Atlantis, rolled back from Launch Pad 39A in order to conduct tests on the cables. A prior extensive evaluation of NASA'''s SRB cable inventory on the shelf revealed conductor damage in four (of about 200) cables. Shuttle managers decided to prove the integrity of the system tunnel cables already on Atlantis before launching. Workers are conducting inspections, making continuity checks and conducting X-ray analysis on the cables. The launch has been rescheduled no earlier than Feb. 6.

Cosmological constraints on neutrinos with Planck data

NASA Astrophysics Data System (ADS)

Spinelli, M.

2015-07-01

Neutrinos take part in the dance of the evolving Universe influencing its history from leptogenesis, to Big Bang nucleosynthesis, until late time structure formation. This makes cosmology, and in particular one of its primary observables the Cosmic Microwave Background (CMB), an unusual but valuable tool for testing Neutrino Physics. The best measurement to date of full-sky CMB anisotropies comes from the Planck satellite launched in 2009 by the European Space Agency (ESA) and successful follower of COBE and WMAP. Testing Planck data against precise theoretical predictions allow us to shed light on various interesting open questions such as the value of the absolute scale of neutrino masses or their energy density. We revise here the results concerning neutrinos obtained by the Planck Collaboration in the 2013 data release.

KSC-2010-5772

NASA Image and Video Library

2010-12-03

CAPE CANAVERAL, Fla. -- The SpaceX Falcon 9 rocket awaits a static fire test on Space Launch Complex-40 at Cape Canaveral Air Force Station, in which all nine Merlin engines will fire at once. The engines use rocket-grade kerosene and liquid oxygen to produce 1 million pounds of thrust. After the test, SpaceX will conduct a thorough review of all data as engineers make final preparations for the first launch of the Commercial Orbital Transportation Services (COTS) Dragon spacecraft to low Earth orbit atop the Falcon 9. This first stage firing is part of a full launch dress rehearsal, which will end after the engines fire at full power for two seconds, with only the hold-down system restraining the rocket from flight. Photo credit: NASA/Tony Gray and Kevin O'Connell

KSC-2010-5774

NASA Image and Video Library

2010-12-04

CAPE CANAVERAL, Fla. -- During a static fire test on Space Launch Complex-40 at Cape Canaveral Air Force Station, all nine Merlin engines of the SpaceX Falcon 9 rocket fire at once. The engines use rocket-grade kerosene and liquid oxygen to produce 1 million pounds of thrust. After the test, SpaceX began to conduct a thorough review of all data as engineers make final preparations for the first launch of the Commercial Orbital Transportation Services (COTS) Dragon spacecraft to low Earth orbit atop the Falcon 9. This first stage firing is part of a full launch dress rehearsal, which ended after the engines fired at full power for two seconds, with only the hold-down system restraining the rocket from flight. Photo credit: NASA/Tony Gray and Kevin O'Connell

KSC-2010-5775

NASA Image and Video Library

2010-12-04

CAPE CANAVERAL, Fla. -- During a static fire test on Space Launch Complex-40 at Cape Canaveral Air Force Station, all nine Merlin engines of the SpaceX Falcon 9 rocket fire at once. The engines use rocket-grade kerosene and liquid oxygen to produce 1 million pounds of thrust. After the test, SpaceX began to conduct a thorough review of all data as engineers make final preparations for the first launch of the Commercial Orbital Transportation Services (COTS) Dragon spacecraft to low Earth orbit atop the Falcon 9. This first stage firing is part of a full launch dress rehearsal, which ended after the engines fired at full power for two seconds, with only the hold-down system restraining the rocket from flight. Photo credit: NASA/Tony Gray and Kevin O'Connell

KSC-2010-5776

NASA Image and Video Library

2010-12-04

CAPE CANAVERAL, Fla. -- During a static fire test on Space Launch Complex-40 at Cape Canaveral Air Force Station, all nine Merlin engines of the SpaceX Falcon 9 rocket fire at once. The engines use rocket-grade kerosene and liquid oxygen to produce 1 million pounds of thrust. After the test, SpaceX began to conduct a thorough review of all data as engineers make final preparations for the first launch of the Commercial Orbital Transportation Services (COTS) Dragon spacecraft to low Earth orbit atop the Falcon 9. This first stage firing is part of a full launch dress rehearsal, which ended after the engines fired at full power for two seconds, with only the hold-down system restraining the rocket from flight. Photo credit: NASA/Tony Gray and Kevin O'Connell

A Generic Software Architecture For Prognostics

NASA Technical Reports Server (NTRS)

Teubert, Christopher; Daigle, Matthew J.; Sankararaman, Shankar; Goebel, Kai; Watkins, Jason

2017-01-01

Prognostics is a systems engineering discipline focused on predicting end-of-life of components and systems. As a relatively new and emerging technology, there are few fielded implementations of prognostics, due in part to practitioners perceiving a large hurdle in developing the models, algorithms, architecture, and integration pieces. As a result, no open software frameworks for applying prognostics currently exist. This paper introduces the Generic Software Architecture for Prognostics (GSAP), an open-source, cross-platform, object-oriented software framework and support library for creating prognostics applications. GSAP was designed to make prognostics more accessible and enable faster adoption and implementation by industry, by reducing the effort and investment required to develop, test, and deploy prognostics. This paper describes the requirements, design, and testing of GSAP. Additionally, a detailed case study involving battery prognostics demonstrates its use.

Plasma process control with optical emission spectroscopy

NASA Astrophysics Data System (ADS)

Ward, P. P.

Plasma processes for cleaning, etching and desmear of electronic components and printed wiring boards (PWB) are difficult to predict and control. Non-uniformity of most plasma processes and sensitivity to environmental changes make it difficult to maintain process stability from day to day. To assure plasma process performance, weight loss coupons or post-plasma destructive testing must be used. The problem with these techniques is that they are not real-time methods and do not allow for immediate diagnosis and process correction. These methods often require scrapping some fraction of a batch to insure the integrity of the rest. Since these methods verify a successful cycle with post-plasma diagnostics, poor test results often determine that a batch is substandard and the resulting parts unusable. Both of these methods are a costly part of the overall fabrication cost. A more efficient method of testing would allow for constant monitoring of plasma conditions and process control. Process failures should be detected before the parts being treated. are damaged. Real time monitoring would allow for instantaneous corrections. Multiple site monitoring would allow for process mapping within one system or simultaneous monitoring of multiple systems. Optical emission spectroscopy conducted external to the plasma apparatus would allow for this sort of multifunctional analysis without perturbing the glow discharge. In this paper, optical emission spectroscopy for non-intrusive, in situ process control will be explored. A discussion of this technique as it applies towards process control, failure analysis and endpoint determination will be conducted. Methods for identifying process failures, progress and end of etch back and desmear processes will be discussed.

Decision making about Pap test use among Korean immigrant women: A qualitative study.

PubMed

Kim, Kyounghae; Kim, Soohyun; Gallo, Joseph J; Nolan, Marie T; Han, Hae-Ra

2017-08-01

Understanding how individuals make decisions about Pap tests concerning their personal values helps health-care providers offer tailored approaches to guide patients' decision making. Yet research has largely ignored decision making about Pap tests among immigrant women who experience increased risk of cervical cancer. To explore decision making about Pap tests among Korean immigrant women. We conducted a qualitative descriptive study using 32 semi-structured, in-depth interviews with Korean immigrant women residing in a north-eastern metropolitan area. Data were audio-recorded, transcribed verbatim and analysed using inductive coding. Although most women with positive decisions made their own decisions, some women deferred to their providers, and others made decisions in collaboration with their providers and significant others. While women making positive decisions tended to consider both barriers to and facilitators of having Pap tests, women making negative decisions predominantly discussed the barriers to having Pap tests, such as modesty and differences between the South Korean and US health-care systems. The women's reflections on their decisions differed regarding their Pap test decisions. Women's desired roles in the decision-making process and reflection on their decision outcome appeared to vary, although most participants with positive decisions made their own decisions and were satisfied with their decisions. Future research should conduct longitudinal, quantitative studies to test our findings regarding decision-making processes and outcomes about Pap tests. The findings should be incorporated into cervical cancer screening practices to fulfil the unmet needs of immigrant women in patient-provider communication and to facilitate women's decision making about Pap tests. © 2016 The Authors. Health Expectations published by John Wiley & Sons Ltd.

Untapped Potential of Observational Research to Inform Clinical Decision Making: American Society of Clinical Oncology Research Statement.

PubMed

Visvanathan, Kala; Levit, Laura A; Raghavan, Derek; Hudis, Clifford A; Wong, Sandra; Dueck, Amylou; Lyman, Gary H

2017-06-01

ASCO believes that high-quality observational studies can advance evidence-based practice for cancer care and are complementary to randomized controlled trials (RCTs). Observational studies can generate hypotheses by evaluating novel exposures or biomarkers and by revealing patterns of care and relationships that might not otherwise be discovered. Researchers can then test these hypotheses in RCTs. Observational studies can also answer or inform questions that either have not been or cannot be answered by RCTs. In addition, observational studies can be used for postmarketing surveillance of new cancer treatments, particularly in vulnerable populations. The incorporation of observational research as part of clinical decision making is consistent with the position of many leading institutions. ASCO identified five overarching recommendations to enhance the role of observational research in clinical decision making: (1) improve the quality of electronic health data available for research, (2) improve interoperability and the exchange of electronic health information, (3) ensure the use of rigorous observational research methodologies, (4) promote transparent reporting of observational research studies, and (5) protect patient privacy.

Self-efficacy as a predictor of dietary change in a low-socioeconomic-status southern adult population.

PubMed

Shannon, J; Kirkley, B; Ammerman, A; Keyserling, T; Kelsey, K; DeVellis, R; Simpson, R J

1997-06-01

There is an increasing emphasis on designing health promotion interventions for low-socioeconomic-status (SES) individuals. However, many previously developed behavior change tools have not been tested in this population. Self-efficacy was measured at pre- and postintervention as part of a randomized clinical trial to reduce cholesterol levels in rural low-SES Southern adults. A 22-item scale was designed and validated to measure subjects' confidence in their abilities to make dietary changes. High mean self-efficacy was noted in both control and intervention subjects at pre- and postintervention. Mean self-efficacy score was a significant predictor of dietary change at both preintervention and postintervention. This study demonstrates that self-efficacy is a predictor of ability to make dietary changes in a low-SES rural population. This finding is of significance to researchers and practitioners wishing to design theory-based health promotion interventions in this population.

A comparative analysis of British and Taiwanese students' conceptual and procedural knowledge of fraction addition

NASA Astrophysics Data System (ADS)

Li, Hui-Chuan

2014-10-01

This study examines students' procedural and conceptual achievement in fraction addition in England and Taiwan. A total of 1209 participants (561 British students and 648 Taiwanese students) at ages 12 and 13 were recruited from England and Taiwan to take part in the study. A quantitative design by means of a self-designed written test is adopted as central to the methodological considerations. The test has two major parts: the concept part and the skill part. The former is concerned with students' conceptual knowledge of fraction addition and the latter is interested in students' procedural competence when adding fractions. There were statistically significant differences both in concept and skill parts between the British and Taiwanese groups with the latter having a higher score. The analysis of the students' responses to the skill section indicates that the superiority of Taiwanese students' procedural achievements over those of their British peers is because most of the former are able to apply algorithms to adding fractions far more successfully than the latter. Earlier, Hart [1] reported that around 30% of the British students in their study used an erroneous strategy (adding tops and bottoms, for example, 2/3 + 1/7 = 3/10) while adding fractions. This study also finds that nearly the same percentage of the British group remained using this erroneous strategy to add fractions as Hart found in 1981. The study also provides evidence to show that students' understanding of fractions is confused and incomplete, even those who are successfully able to perform operations. More research is needed to be done to help students make sense of the operations and eventually attain computational competence with meaningful grounding in the domain of fractions.

The Politics of Education at the Local, State and Federal Levels.

ERIC Educational Resources Information Center

Kirst, Michael W., Ed.

The contents of this book are organized in three parts, the first of which is divided into two sections. Part I. Political Influence in Local Education Policy Making. Section A. Politics of education in large cities: "Schools and politics in the big city," Robert H. Salisbury; "Fiscal status and school policy making in six large…

17 CFR Appendix B to Part 38 - Guidance on, and Acceptable Practices in, Compliance With Core Principles

Code of Federal Regulations, 2014 CFR

2014-04-01

.... The designated contract market must demonstrate that it is making a good-faith effort to resolve... decision-making and implementation of emergency intervention in the market. At a minimum, the DCM must have... COMMODITY FUTURES TRADING COMMISSION DESIGNATED CONTRACT MARKETS Pt. 38, App. B Appendix B to Part 38...

34 CFR 350.62 - What are the matching requirements?

Code of Federal Regulations, 2012 CFR

2012-07-01

... requirements? (a)(1) The Secretary may make grants to pay for part of the costs of research and demonstration... projects. (2) Each grantee must participate in the costs of those projects. (3) The specific amount of cost... considered in the selection process. (b)(1) The Secretary may make grants to pay for part or all of the costs...

Getting Off to a Good Start: The Choices Authors Make (Part Three of a Three-Part Series).

ERIC Educational Resources Information Center

Ohanian, Susan

1997-01-01

Discusses student reaction to how fairy tales should begin and proceed and the language choices authors make when adapting fairy tales. Cites several different versions of "The Frog Prince" and describes them. Discusses students' own versions. Gives questions for stimulating student response to "The Frog Prince." (PA)

Design without Make--A New Design Pedagogy for STEM Education

ERIC Educational Resources Information Center

Thompson, Brandon; Vernado, Terri; Matthews, Brian

2009-01-01

This paper describes the first part of a new three-part study of STEM and engineering design research termed Design-Without-Make to be conducted by NC [North Carolina] State University in 2009-10 in an NC high school. The hybrid quantitative, qualitative case study is being developed with the purpose of capturing what new technological learning…

Assessing the health equity impacts of regional land-use plan making: An equity focussed health impact assessment of alternative patterns of development of the Whitsunday Hinterland and Mackay Regional Plan, Australia (Short report)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gunning, Colleen, E-mail: Colleen_Gunning@health.qld.gov.a; Harris, Patrick; Mallett, John

2011-07-15

Health service and partners completed an equity focussed health impact assessment to influence the consideration of health and equity within regional land-use planning in Queensland, Australia. This project demonstrated how an equity oriented assessment matrix can assist in testing regional planning scenarios. It is hoped that this HIA will contribute to the emerging interest in ensuring that potential differential health impacts continue to be considered as part of land-use planning processes.

Project Viking.

NASA Technical Reports Server (NTRS)

1973-01-01

NASA will launch two spacecraft to Mars in 1975 to soft-land on the surface and test for signs of life. After confirming the site data from orbit, each of the spacecraft will separate into two parts, an orbiter and a lander. Together they will conduct scientific studies of the Martian atmosphere and surface. The lander's instruments will collect data for transmission to earth, direct or via the orbiter, including panoramic, stereo color pictures of its immediate surroundings, molecular organic and inorganic analyses of the soil, and atmospheric, meteorological, magnetic, and seismic characteristics. It will also make measurements of the atmosphere as it descends to the surface.

Criteria for site selection and frequency allocation (keynote paper), part 5

NASA Technical Reports Server (NTRS)

Rottger, J.

1985-01-01

Technical aspects of mesosphere-stratosphere-troposphere (MST) Radar on site and frequency selection were discussed. Recommendations on site selections are presented. Tests of interference will be conducted before selecting a site. A small directional antenna may be suitable to simulate sidelobe sensitivity of radars however, sophisticated data-processing methods make system sensitivity extremely good. The use of the complete data system to look for interference is recommended. There is the difficulty of allocation of frequencies -- almost continuous use by these radars will be made when the band 40 to 60 MHz is allocated to other services.

Development of deep drawn aluminum piston tanks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitehead, J.C.; Bronder, R.L.; Kilgard, L.W.

1990-06-08

An aluminum piston tank has been developed for applications requiring lightweight, low cost, low pressure, positive-expulsion liquid storage. The 3 liter (183 in{sup 3}) vessel is made primarily from aluminum sheet, using production forming and joining operations. The development process relied mainly on pressurizing prototype parts and assemblies to failure, as the primary source of decision making information for driving the tank design toward its optimum minimum-mass configuration. Critical issues addressed by development testing included piston operation, strength of thin-walled formed shells, alloy choice, and joining the end cap to the seamless deep drawn can. 9 refs., 8 figs.

KSC01pp0149

NASA Image and Video Library

2001-01-20

KENNEDY SPACE CENTER, FLA. -- Solid rocket booster cables are exposed after removal of the SRB system tunnel cover. The SRB is part of Space Shuttle Atlantis, rolled back from Launch Pad 39A in order to conduct tests on the cables. A prior extensive evaluation of NASA’s SRB cable inventory on the shelf revealed conductor damage in four (of about 200) cables. Shuttle managers decided to prove the integrity of the system tunnel cables already on Atlantis before launching. Workers are conducting inspections, making continuity checks and conducting X-ray analysis on the cables. The launch has been rescheduled no earlier than Feb. 6.

Naturally Inspired Firefly Controller For Stabilization Of Double Inverted Pendulum

NASA Astrophysics Data System (ADS)

Srikanth, Kavirayani; Nagesh, Gundavarapu

2015-12-01

A double inverted pendulum plant as an established model that is analyzed as part of this work was tested under the influence of time delay, where the controller was fine tuned using a firefly algorithm taking into considering the fitness function of variation of the cart position and to minimize the cart position displacement and still stabilize it effectively. The naturally inspired algorithm which imitates the fireflies definitely is an energy efficient method owing to the inherent logic of the way the fireflies respond collectively and has shown that critical time delays makes the system healthy.

29 CFR 98.50 - How is this part written?

Code of Federal Regulations, 2010 CFR

2010-07-01

... this part written? (a) This part uses a “plain language” format to make it easier for the general... Labor. (c) The “Covered Transactions” diagram in the appendix to this part shows the levels or “tiers...

22 CFR 1006.50 - How is this part written?

Code of Federal Regulations, 2010 CFR

2010-04-01

... (NONPROCUREMENT) § 1006.50 How is this part written? (a) This part uses a “plain language” format to make it... part shows the levels or “tiers” at which the Inter-American Foundation enforces an exclusion under...

22 CFR 1508.50 - How is this part written?

Code of Federal Regulations, 2010 CFR

2010-04-01

... (NONPROCUREMENT) § 1508.50 How is this part written? (a) This part uses a “plain language” format to make it... this part shows the levels or “tiers” at which the African Development Foundation enforces an exclusion...

Reduced Structural Connectivity in Frontostriatal White Matter Tracts in the Associative Loop in Schizophrenia.

PubMed

Levitt, James J; Nestor, Paul G; Levin, Laura; Pelavin, Paula; Lin, Pan; Kubicki, Marek; McCarley, Robert W; Shenton, Martha E; Rathi, Yogesh

2017-11-01

The striatum receives segregated and integrative white matter tracts from the cortex facilitating information processing in the cortico-basal ganglia network. The authors examined both types of input tracts in the striatal associative loop in chronic schizophrenia patients and healthy control subjects. Structural and diffusion MRI scans were acquired on a 3-T system from 26 chronic schizophrenia patients and 26 matched healthy control subjects. Using FreeSurfer, the associative cortex was parcellated into ventrolateral prefrontal cortex and dorsolateral prefrontal cortex subregions. The striatum was manually parcellated into its associative and sensorimotor functional subregions. Fractional anisotropy and normalized streamlines, an estimate of fiber counts, were assessed in four frontostriatal tracts (dorsolateral prefrontal cortex-associative striatum, dorsolateral prefrontal cortex-sensorimotor striatum, ventrolateral prefrontal cortex-associative striatum, and ventrolateral prefrontal cortex-sensorimotor striatum). Furthermore, these measures were correlated with a measure of cognitive control, the Trail-Making Test, Part B. Results showed reduced fractional anisotropy and fewer streamlines in chronic schizophrenia patients for all four tracts, both segregated and integrative. Post hoc t tests showed reduced fractional anisotropy in the left ventrolateral prefrontal cortex-associative striatum and left ventrolateral prefrontal cortex-sensorimotor striatum and fewer normalized streamlines in the right dorsolateral prefrontal cortex-sensorimotor striatum and in the left and right ventrolateral prefrontal cortex-sensorimotor striatum in chronic schizophrenia patients. Furthermore, normalized streamlines in the right dorsolateral prefrontal cortex-sensorimotor striatum negatively correlated with Trail-Making Test, Part B, time spent in healthy control subjects but not in chronic schizophrenia patients. These findings demonstrated that structural connectivity is reduced in both segregated and integrative tracts in the striatal associative loop in chronic schizophrenia and that reduced normalized streamlines in the right-hemisphere dorsolateral prefrontal cortex-sensorimotor striatum predicted worse cognitive control in healthy control subjects but not in chronic schizophrenia patients, suggesting a loss of a "normal" brain-behavior correlation in chronic schizophrenia.

Geologic structure and occurrence of gas in part of southwestern New York. Part 2, Subsurface structure inpart of southwestern New York and mode of occurrence of gas in the Medina group

USGS Publications Warehouse

Richardson, G.B.

1941-01-01

Based on the records of several hundred deep wells, contour maps have been prepared showing the monoclinal structure of part of western New York, and isopach lines have been drawn showing the westward convergence of the rocks. The mode of occurrence of natural gas in the Medina group is briefly discussed. The location of the gas fields has not been determined by structural traps, but rather stratigraphy and lithology are the controlling factors in trapping the gas, which occurs in porous lenses and streaks of sandstone sealed within impermeable beds. This mode of occurrences of the Medina gas makes the search for new fields in western New York more hazardous than in most natural gas regions. As structure has not formed traps for the gas there is no surface guide to favorable sites for testing, and new fields are found by haphazard drilling. It would be helpful, however, when wells are sunk, to study the lithology of the gas-bearing zone by an examination of the drill cuttings and core samples of the sand and to have electrical logs made of the wells to obtain measurements of permeability and porosity. Such tests may indicate the direction of greatest porosity in which the sand is more likely to contain gas.

Evaluation of Cable Harness Post-Installation Testing. Part B

NASA Technical Reports Server (NTRS)

King, M. S.; Iannello, C. J.

2011-01-01

The Cable Harness Post-Installation Testing Report was written in response to an action issued by the Ares Project Control Board (PCB). The action for the Ares I Avionics & Software Chief Engineer and the Avionics Integration and Vehicle Systems Test Work Breakdown Structure (WBS) Manager in the Vehicle Integration Office was to develop a set of guidelines for electrical cable harnesses. Research showed that post-installation tests have been done since the Apollo era. For Ares I-X, the requirement for post-installation testing was removed to make it consistent with the avionics processes used on the Atlas V expendable launch vehicle. Further research for the report involved surveying government and private sector launch vehicle developers, military and commercial aircraft, spacecraft developers, and harness vendors. Responses indicated crewed launch vehicles and military aircraft perform post-installation tests. Key findings in the report were as follows: Test requirements identify damage, human-rated vehicles should be tested despite the identification of statistically few failures, data does not support the claim that post-installation testing damages the harness insulation system, and proper planning can reduce overhead associated with testing. The primary recommendation of the report is for the Ares projects to retain the practice of post-fabrication and post-installation cable harness testing.

The Development and Application of Simulative Insulation Resistance Tester

NASA Astrophysics Data System (ADS)

Jia, Yan; Chai, Ziqi; Wang, Bo; Ma, Hao

2018-02-01

The insulation state determines the performance and insulation life of electrical equipment, so it has to be judged in a timely and accurate manner. Insulation resistance test, as the simplest and most basic test of high voltage electric tests, can measure the insulation resistance and absorption ratio which are effective criterion of part or whole damp or dirty, breakdown, severe overheating aging and other insulation defects. It means that the electrical test personnel need to be familiar with the principle of insulation resistance test, and able to operate the insulation resistance tester correctly. At present, like the insulation resistance test, most of electrical tests are trained by physical devices with the real high voltage. Although this allows the students to truly experience the test process and notes on security, it also has certain limitations in terms of safety and test efficiency, especially for a large number of new staves needing induction training every year. This paper presents a new kind of electrical test training system based on the simulative device of dielectric loss measurement and simulative electrical testing devices. It can not only overcome the defects of current training methods, but also provide other advantages in economical efficiency and scalability. That makes it possible for the system to be allied in widespread.

Nondestructive Techniques to Evaluate the Characteristics and Development of Engineered Cartilage

PubMed Central

Mansour, Joseph M.; Lee, Zhenghong; Welter, Jean F.

2016-01-01

In this review, methods for evaluating the properties of tissue engineered (TE) cartilage are described. Many of these have been developed for evaluating properties of native and osteoarthritic articular cartilage. However, with the increasing interest in engineering cartilage, specialized methods are needed for nondestructive evaluation of tissue while it is developing and after it is implanted. Such methods are needed, in part, due to the large inter- and intra-donor variability in the performance of the cellular component of the tissue, which remains a barrier to delivering reliable TE cartilage for implantation. Using conventional destructive tests, such variability makes it near-impossible to predict the timing and outcome of the tissue engineering process at the level of a specific piece of engineered tissue and also makes it difficult to assess the impact of changing tissue engineering regimens. While it is clear that the true test of engineered cartilage is its performance after it is implanted, correlation of pre and post implantation properties determined non-destructively in vitro and/or in vivo with performance should lead to predictive methods to improve quality-control and to minimize the chances of implanting inferior tissue. PMID:26817458

Making and Testing Hybrid Gravitational Waves from Colliding Black Holes and Neutron Stars

NASA Astrophysics Data System (ADS)

Garcia, Alyssa; Lovelace, Geoffrey; SXS Collaboration

2016-03-01

The Laser Interferometer Gravitational-wave Observatory (LIGO) is a detector that is currently working to observe gravitational waves (GW) from astronomical sources, such as colliding black holes and neutron stars, which are among LIGO's most promising sources. Observing as many waves as possible requires accurate predictions of what the waves look like, which are only possible with numerical simulations. In this poster, I will present results from new simulations of colliding black holes made using the Spectral Einstein Code (SpEC). In particular, I will present results for extending new and existing waveforms and using an open-source library. To construct a waveform that spans the frequency range where LIGO is most sensitive, we combine inexpensive, post-Newtonian approximate waveforms (valid far from merger) and numerical relativity waveforms (valid near the time of merger, when all approximations fail), making a hybrid GW. This work is one part of a new prototype framework for Numerical INJection Analysis with Matter (Matter NINJA). The complete Matter NINJA prototype will test GW search pipelines' abilities to find hybrid waveforms, from simulations containing matter (such as black hole-neutron star binaries), hidden in simulated detector noise.

Association between Four-Level Categorisation of Indoor Exposure and Perceived Indoor Air Quality.

PubMed

Tähtinen, Katja; Lappalainen, Sanna; Karvala, Kirsi; Remes, Jouko; Salonen, Heidi

2018-04-04

The aim of this study was to develop and test a tool for assessing urgency of indoor air quality (IAQ) measures. The condition of the 27 buildings were investigated and results were categorized. Statistical test studied the differences between the categories and the employees’ complaints about their work environment. To study the employees’ experiences of the work premises, a validated indoor air (IA) questionnaire was used. This study reveals a multifaceted problem: many factors affecting IAQ may also affect perceived IAQ, making it difficult to separate the impurity sources and ventilation system deficiencies affecting to employee experiences. An examination of the relationship between the categories and perceived IAQ revealed an association between the mould odour perceived by employees and mould detected by the researcher. A weak link was also found between the assessed categories and environmental complaints. However, we cannot make far-reaching conclusions regarding the assessed probability of abnormal IA exposure in the building on the basis of employee experiences. According to the results, categorising tool can partly support the assessment of the urgency for repairs when several factors that affect IAQ are taken into account.

Association between Four-Level Categorisation of Indoor Exposure and Perceived Indoor Air Quality

PubMed Central

Tähtinen, Katja; Lappalainen, Sanna; Karvala, Kirsi; Remes, Jouko; Salonen, Heidi

2018-01-01

The aim of this study was to develop and test a tool for assessing urgency of indoor air quality (IAQ) measures. The condition of the 27 buildings were investigated and results were categorized. Statistical test studied the differences between the categories and the employees’ complaints about their work environment. To study the employees’ experiences of the work premises, a validated indoor air (IA) questionnaire was used. This study reveals a multifaceted problem: many factors affecting IAQ may also affect perceived IAQ, making it difficult to separate the impurity sources and ventilation system deficiencies affecting to employee experiences. An examination of the relationship between the categories and perceived IAQ revealed an association between the mould odour perceived by employees and mould detected by the researcher. A weak link was also found between the assessed categories and environmental complaints. However, we cannot make far-reaching conclusions regarding the assessed probability of abnormal IA exposure in the building on the basis of employee experiences. According to the results, categorising tool can partly support the assessment of the urgency for repairs when several factors that affect IAQ are taken into account. PMID:29617335

Predictors of outcome after treatment of mild traumatic brain injury: a pilot study.

PubMed

Leininger, Shelley; Strong, Carrie-Ann H; Donders, Jacobus

2014-01-01

To determine factors affecting outcome of comprehensive outpatient rehabilitation of individuals who sustained a mild traumatic brain injury. From a 4-year series of referrals, 49 nonconsecutive participants met criteria for mild traumatic brain injury (ie, loss of consciousness <30 minutes, Glasgow Coma Scale score >12). Outpatient, community-based postconcussion clinic at a rehabilitation hospital. Participants and therapy staff completed the Mayo-Portland Adaptability Inventory-Fourth Edition (MPAI-4) at the initiation and conclusion of treatment. Participants were also administered the Trail Making Test at the start of treatment. Participants generally gave poorer adaptability ratings than staff at the beginning and discharge of treatment. Regression analyses revealed that after controlling for baseline ratings, psychiatric history was associated with worse participant-rated MPAI-4 Adjustment scores at treatment discharge, whereas better Trail Making Test Part B performance at initiation of treatment predicted better participant-rated MPAI-4 Ability at treatment discharge. Premorbid demographic and baseline neurocognitive factors should be taken into account prior to comprehensive treatment of mild traumatic brain injury, as they can influence long-term outcomes. Adaptability ratings from both staff and participants can be useful in gaining different perspectives and assessing factors affecting recovery.

An exploratory analysis linking neuropsychological testing to quantification of tractography using High Definition Fiber Tracking (HDFT) in military TBI.

PubMed

Presson, Nora; Beers, Sue R; Morrow, Lisa; Wagener, Lauren M; Bird, William A; Van Eman, Gina; Krishnaswamy, Deepa; Penderville, Joshua; Borrasso, Allison J; Benso, Steven; Puccio, Ava; Fissell, Catherine; Okonkwo, David O; Schneider, Walter

2015-09-01

To realize the potential value of tractography in traumatic brain injury (TBI), we must identify metrics that provide meaningful information about functional outcomes. The current study explores quantitative metrics describing the spatial properties of tractography from advanced diffusion imaging (High Definition Fiber Tracking, HDFT). In a small number of right-handed males from military TBI (N = 7) and civilian control (N = 6) samples, both tract homologue symmetry and tract spread (proportion of brain mask voxels contacted) differed for several tracts among civilian controls and extreme groups in the TBI sample (high scorers and low scorers) for verbal recall, serial reaction time, processing speed index, and trail-making. Notably, proportion of voxels contacted in the arcuate fasciculus distinguished high and low performers on the CVLT-II and PSI, potentially reflecting linguistic task demands, and GFA in the left corticospinal tract distinguished high and low performers in PSI and Trail Making Test Part A, potentially reflecting right hand motor response demands. The results suggest that, for advanced diffusion imaging, spatial properties of tractography may add analytic value to measures of tract anisotropy.

Effect of Krueger nose flaps on the experimental force and moment characteristics of an oblique wing

NASA Technical Reports Server (NTRS)

Hopkins, E. J.; Lovette, G. H.

1976-01-01

Experimental force and moment data are presented for an oblique wing mounted on a body of revolution and equipped with Krueger type nose flaps. The effectiveness of these flaps in making the moment curves more linear by controlling the flow separation on the downstream wing panel at high lift coefficients was determined. The investigation of the effects of the Krueger flaps covered two cases: (1) use of the flaps on the downstream wing panel only and (2) use of the flaps on both wing panels. For part of the tests, the Krueger flaps were mounted on nose flaps that were drooped either 5 deg or 10 deg. The wing was elliptical in planform, had an aspect ratio of 6.0 (based on the unswept span) and was tested at sweep angles of 0, 45 deg, and 50 deg. The Mach-number range covered was from 0.25 to 0.95. It was found that the most effective arrangement of the Krueger flaps for making the pitching-, rolling-, and yawing-moment curves more linear at high lift coefficients was having the Krueger flaps mounted on the nose flaps drooped 5 deg and only on the downstream wing panel.

Bilateral subthalamic or pallidal stimulation for Parkinson's disease affects neither memory nor executive functions: a consecutive series of 62 patients.

PubMed

Ardouin, C; Pillon, B; Peiffer, E; Bejjani, P; Limousin, P; Damier, P; Arnulf, I; Benabid, A L; Agid, Y; Pollak, P

1999-08-01

There is a renewal of interest in surgical approaches including lesions and deep brain stimulation directed at motor subcorticofrontal loops. Bilateral lesioning presents a far greater risk of adverse effects, especially cognitive impairment. Furthermore, the main advantages of the stimulation procedure over lesioning are adaptability and reversibility of effects. The aim of this study was to assess the influence of bilateral stimulation of the subthalamic nucleus or internal globus pallidus on memory and executive functions in Parkinson's disease. Sixty-two patients were assessed before and after 3 to 6 months of chronic bilateral stimulation of the subthalamic nucleus (n = 49) or internal globus pallidus (n = 13). The neuropsychological tests used were the Mattis Dementia Rating Scale, the Grober and Buschke Verbal Learning Test, the Wisconsin Card Sorting Test, category and literal fluency, graphic and motor series, the Stroop Test, and the Trail Making Test. Mood was evaluated by the Beck Depression Inventory. Only 4 of 25 cognitive variables were affected by deep brain stimulation. Under stimulation, performance improved for Parts A and B of the Trail Making Test, but there was a deterioration in literal and total lexical fluency. There was also a mild but significant improvement in mood. It may therefore be concluded that stimulation of the subthalamic nucleus or internal globus pallidus does not change the overall cognitive performance in Parkinson's disease and does not greatly affect the functioning of subcorticofrontal loops involved in cognition in humans. This relative absence of cognitive impairment in bilateral deep brain stimulation is likely because of the accurate positioning of the electrodes, allowing the effects of stimulation to be confined to sensorimotor circuits.

A critique of statistical hypothesis testing in clinical research

PubMed Central

Raha, Somik

2011-01-01

Many have documented the difficulty of using the current paradigm of Randomized Controlled Trials (RCTs) to test and validate the effectiveness of alternative medical systems such as Ayurveda. This paper critiques the applicability of RCTs for all clinical knowledge-seeking endeavors, of which Ayurveda research is a part. This is done by examining statistical hypothesis testing, the underlying foundation of RCTs, from a practical and philosophical perspective. In the philosophical critique, the two main worldviews of probability are that of the Bayesian and the frequentist. The frequentist worldview is a special case of the Bayesian worldview requiring the unrealistic assumptions of knowing nothing about the universe and believing that all observations are unrelated to each other. Many have claimed that the first belief is necessary for science, and this claim is debunked by comparing variations in learning with different prior beliefs. Moving beyond the Bayesian and frequentist worldviews, the notion of hypothesis testing itself is challenged on the grounds that a hypothesis is an unclear distinction, and assigning a probability on an unclear distinction is an exercise that does not lead to clarity of action. This critique is of the theory itself and not any particular application of statistical hypothesis testing. A decision-making frame is proposed as a way of both addressing this critique and transcending ideological debates on probability. An example of a Bayesian decision-making approach is shown as an alternative to statistical hypothesis testing, utilizing data from a past clinical trial that studied the effect of Aspirin on heart attacks in a sample population of doctors. As a big reason for the prevalence of RCTs in academia is legislation requiring it, the ethics of legislating the use of statistical methods for clinical research is also examined. PMID:22022152

Combustor Operability and Performance Verification for HIFiRE Flight 2

NASA Technical Reports Server (NTRS)

Storch, Andrea M.; Bynum, Michael; Liu, Jiwen; Gruber, Mark

2011-01-01

As part of the Hypersonic International Flight Research Experimentation (HIFiRE) Direct-Connect Rig (HDCR) test and analysis activity, three-dimensional computational fluid dynamics (CFD) simulations were performed using two Reynolds-Averaged Navier Stokes solvers. Measurements obtained from ground testing in the NASA Langley Arc-Heated Scramjet Test Facility (AHSTF) were used to specify inflow conditions for the simulations and combustor data from four representative tests were used as benchmarks. Test cases at simulated flight enthalpies of Mach 5.84, 6.5, 7.5, and 8.0 were analyzed. Modeling parameters (e.g., turbulent Schmidt number and compressibility treatment) were tuned such that the CFD results closely matched the experimental results. The tuned modeling parameters were used to establish a standard practice in HIFiRE combustor analysis. Combustor performance and operating mode were examined and were found to meet or exceed the objectives of the HIFiRE Flight 2 experiment. In addition, the calibrated CFD tools were then applied to make predictions of combustor operation and performance for the flight configuration and to aid in understanding the impacts of ground and flight uncertainties on combustor operation.

Damage in Monolithic Thin-Film Photovoltaic Modules Due to Partial Shade

DOE Office of Scientific and Technical Information (OSTI.GOV)

Silverman, Timothy J.; Mansfield, Lorelle; Repins, Ingrid

2016-09-01

The typical configuration of monolithic thin-film photovoltaic modules makes it possible for partial shade to place one or more cells in such a module in reverse bias. Reverse bias operation leads to high voltage, current density, and power density conditions, which can act as driving forces for failure. We showed that a brief outdoor shadow event can cause a 7% permanent loss in power. We applied an indoor partial shade durability test that moves beyond the standard hot spot endurance test by using more realistic mask and bias conditions and by carefully quantifying the permanent change in performance due tomore » the stress. With the addition of a pass criterion based on change in maximum power, this procedure will soon be proposed as a part of the module-type qualification test. All six commercial copper indium gallium diselenide and cadmium telluride modules we tested experienced permanent damage due to the indoor partial shade test, ranging from 4% to 14% loss in maximum power. We conclude by summarizing ways to mitigate partial shade stress at the cell, module, and system levels.« less

Multi-scale Salinity Fronts Observed by Saildrones During the SPURS-2 Field Campaign

NASA Astrophysics Data System (ADS)

Cronin, M. F.; Zhang, D.; Sutton, A. J.; Meinig, C.; Jenkins, R.; Keene, J.

2017-12-01

As part of the Tropical Pacific Observing System (TPOS)-2020 project, two Saildrone Inc. "Saildrones" will be deployed to test the ability of these new autonomous sailing vessel drones for making climate quality meteorological, oceanic and biogeochemical measurements. During the first part of the 6-month mission, in October 2017, the two Saildrones will participate in the Salinity Processes in the Upper Ocean Regional Study-2 (SPURS-2) final field campaign in the eastern tropical Pacific. In this presentation we will show early results from the mission, including intercomparisons of Saildrone measurements against similar measurements from moorings and a research vessel, and Saildrone observations of multi-scale fronts in the eastern Pacific Intertropical Convergence Zone (ITCZ). With its ability to transit at speeds of up to 3-5 knots (for 10-20 knot winds) and to adapt its course and sampling scheme upon demand, Saildrones offer a powerful new tool for oceanographic research. If the measurements are shown to be climate quality, this exciting new platform could play a major new role in the TPOS, either as stationary pseudo-moorings, and/or for making repeat sections (e.g., across cold tongue front, or ITCZ), and/or monitoring evolving conditions, such as the eastern edge of the warm pool as it shifts eastward during an El Niño.

34 CFR 85.50 - How is this part written?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) § 85.50 How is this part written? (a) This part uses a “plain language” format to make it easier for... Department of Education. (c) The “Covered Transactions” diagram in the appendix to this part shows the levels...

21 CFR 1404.50 - How is this part written?

Code of Federal Regulations, 2010 CFR

2010-04-01

... (NONPROCUREMENT) § 1404.50 How is this part written? (a) This part uses a “plain language” format to make it... appendix to this part shows the levels or “tiers” at which the Office of National Drug Control Policy...

Field Test Report: NETL Portable Raman Gas Composition Monitor - Initial Industrial tests at NETL and General Electric (GE)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michael, Buric; Jessica, Mullen; Steven, Woodruff

2012-02-24

NETL has developed new technology which enables the use of Raman spectroscopy in the real-time measurement of gas mixtures. This technology uses a hollow reflective metal-lined capillary waveguide as a gas sampling cell which contains the sample gas, and efficiently collects optical Raman scattering from the gas sample, for measurement with a miniature spectrometer. The result is an optical Raman “fingerprint” for each gas which is tens or hundreds of times larger than that which can be collected with conventional free-space optics. In this manner, the new technology exhibits a combination of measurement speed and accuracy which is unprecedented formore » spontaneous Raman measurements of gases. This makes the system especially well-suited to gas turbine engine control based on a-priori measurement of incoming fuel composition. The system has been developed to produce a measurement of all of the common components of natural gas, including the lesser nitrogen, oxygen, carbon-dioxide, and carbon monoxide diluents to better than 1% concentration accuracy each second. The objective of this task under CRADA 10-N100 was to evaluate the capability of a laser Raman capillary gas sensor for combustion fuels. A portable version of the Raman gas sensor, constructed at NETL, was used for field-trials conducted in a cooperative research effort at a GE facility. Testing under the CRADA was performed in 5 parts. Parts 1-4 were successful in testing of the Raman Gas Composition Monitor with bottled calibration gases, and in continuous monitoring of several gas streams at low pressure, in comparison with an online mass spectrometer. In part 5, the Raman Gas Composition Monitor was moved outdoors for testing with high pressure gas supplies. Some difficulties were encountered during industrial testing including the condensation of heavy hydrocarbons inside the sample cell (in part 5), communication with the GE data collection system, as well as some drift in the optical noise background. The difficulties with liquid contaminants will be overcome through the use of prodigious sample-cell heating and additional line filtration including liquid ingress-protection. The communication problem was resolved through site-specific troubleshooting of the MODBUS data tags.« less

Trajectories of change in cognitive function in people with chronic obstructive pulmonary disease.

PubMed

Park, Soo Kyung

2018-04-01

To describe changes in cognitive function, as measured by the trail making test; to identify distinct patterns of change in cognitive function; and to examine predictors of change in cognitive function in people with severe chronic obstructive pulmonary disease. How cognitive function changes in people with chronic obstructive pulmonary disease and what factors influence those changes over time is not well known, despite the fact that it declines rapidly in this population and significantly impacts functional decline in healthy older adults. A secondary analysis and longitudinal study with a follow-up period of 3 years. A data set from the National Emphysema Treatment Trial provided participant data. Patients with severe chronic obstructive pulmonary disease (n = 307) were recruited at a clinical site. Several demographic and clinical measures were assessed at baseline. Trail making test scores were measured at baseline, 1, 2 and 3 years. Cognitive function was stable for 3 years in people with chronic obstructive pulmonary disease. However, four distinct patterns of change in cognitive function were identified. Age, education, 6-min walk distance and cognitive impairment scores at baseline on the trail making test Part B were significant predictors of worsening cognitive function and below-average cognitive function over 3 years. These findings suggest that increasing exercise capacity improves cognitive function and delays deterioration of cognitive function in people with COPD. Understanding the trajectories of change in cognitive function and predictors of change in cognitive function over 3 years may enable health care providers to identify patients at greatest risk of developing mental deterioration and those who might benefit from interventions to improve cognitive function. Health care providers should periodically assess and frequently screen people with COPD for cognitive function. © 2018 John Wiley & Sons Ltd.

The Utility of Impulsive Bias and Altered Decision Making as Predictors of Drug Efficacy and Target Selection: Rethinking Behavioral Screening for Antidepressant Drugs.

PubMed

Marek, Gerard J; Day, Mark; Hudzik, Thomas J

2016-03-01

Cognitive dysfunction may be a core feature of major depressive disorder, including affective processing bias, abnormal response to negative feedback, changes in decision making, and increased impulsivity. Accordingly, a translational medicine paradigm predicts clinical action of novel antidepressants by examining drug-induced changes in affective processing bias. With some exceptions, these concepts have not been systematically applied to preclinical models to test new chemical entities. The purpose of this review is to examine whether an empirically derived behavioral screen for antidepressant drugs may screen for compounds, at least in part, by modulating an impulsive biasing of responding and altered decision making. The differential-reinforcement-of-low-rate (DRL) 72-second schedule is an operant schedule with a documented fidelity for discriminating antidepressant drugs from nonantidepressant drugs. However, a theoretical basis for this empirical relationship has been lacking. Therefore, this review will discuss whether response bias toward impulsive behavior may be a critical screening characteristic of DRL behavior requiring long inter-response times to obtain rewards. This review will compare and contrast DRL behavior with the five-choice serial reaction time task, a test specifically designed for assessing motoric impulsivity, with respect to psychopharmacological testing and the neural basis of distributed macrocircuits underlying these tasks. This comparison suggests that the existing empirical basis for the DRL 72-second schedule as a pharmacological screen for antidepressant drugs is complemented by a novel hypothesis that altering impulsive response bias for rodents trained on this operant schedule is a previously unrecognized theoretical cornerstone for this screening paradigm. Copyright © 2016 by The American Society for Pharmacology and Experimental Therapeutics.

[Study on the deteriorating course of fresh milk by laser-induced fluorescence spectra].

PubMed

Liu, J; Yu, C Q; Li, J Z; Yan, J X

2001-12-01

Along with the development of living standard, people's demand for food quality and food hygiene also rises. People demand food not only with rich nutrition, inexpensive price, but also with safety. So food hygiene test is paid common attention of society. Milk is a nourishing food and is loved by people. Sour milk goods from milk is also in great demand. But nourishing foods are good for growing many microbes. Fresh milk and sour milk are easy contaminated by microbes and go bad. Laser-induced fluorescence (LIF) technology is an important part of modern optics. It is broadly applied in biomedicine, diagnostics, test of food hygiene, environment protecting, owing to its high sensitivity, high speed, automation, untouched testing. In this paper, we attempted to LIF technology to test milk food quality. We used the third harmonics pulsed Nd:YAG laser (355 nm) as the exciting source, and a multi-track spectrometer as the detector and measured the intensities of apply LIF of fresh milk and sour milk during their deteriorating course. Test system and test method are introduced, fluorescence spectra of deteriorating course are also attached. The test result makes clear that there are close connection between deteriorating course and fluorescence spectra.

Search for a test for fracture potential of asphalt mixes : close out meeting.

DOT National Transportation Integrated Search

2012-08-01

Presentation Outline : 1)Part A Introduction : 2)Part B The OT test method : 3)Part C Surrogate crack tests (6 No.) : 4)Part D Comparison of the crack test methods : 5)Part E Summary & recommendations : 6)Miscellaneous & discussions

The harms of screening: a proposed taxonomy and application to lung cancer screening.

PubMed

Harris, Russell P; Sheridan, Stacey L; Lewis, Carmen L; Barclay, Colleen; Vu, Maihan B; Kistler, Christine E; Golin, Carol E; DeFrank, Jessica T; Brewer, Noel T

2014-02-01

Making rational decisions about screening requires information about its harms, but high-quality evidence is often either not available or not used. One reason may be that we lack a coherent framework, a taxonomy, for conceptualizing and studying these harms. To create a taxonomy, we categorized harms from several sources: systematic reviews of screening, other published literature, and informal discussions with clinicians and patients. We used this information to develop an initial taxonomy and vetted it with local and national experts, making revisions as needed. We propose a taxonomy with 4 domains of harm from screening: physical effects, psychological effects, financial strain, and opportunity costs. Harms can occur at any step of the screening cascade. We provide definitions for each harm domain and illustrate the taxonomy using the example of screening for lung cancer. The taxonomy provides a systematic way to conceptualize harms as experienced by patients. As shown in the lung cancer screening example, the taxonomy also makes clear where (which domains of harms and which parts of the screening cascade) we have useful information and where there are gaps in our knowledge. The taxonomy needs further testing and validation across a broad range of screening programs. We hope that further development of this taxonomy can improve our thinking about the harms of screening, thus informing our research, policy making, and decision making with patients about the wisdom of screening.

Dopaminergic Drug Effects on Probability Weighting during Risky Decision Making.

PubMed

Ojala, Karita E; Janssen, Lieneke K; Hashemi, Mahur M; Timmer, Monique H M; Geurts, Dirk E M; Ter Huurne, Niels P; Cools, Roshan; Sescousse, Guillaume

2018-01-01

Dopamine has been associated with risky decision-making, as well as with pathological gambling, a behavioral addiction characterized by excessive risk-taking behavior. However, the specific mechanisms through which dopamine might act to foster risk-taking and pathological gambling remain elusive. Here we test the hypothesis that this might be achieved, in part, via modulation of subjective probability weighting during decision making. Human healthy controls ( n = 21) and pathological gamblers ( n = 16) played a decision-making task involving choices between sure monetary options and risky gambles both in the gain and loss domains. Each participant played the task twice, either under placebo or the dopamine D 2 /D 3 receptor antagonist sulpiride, in a double-blind counterbalanced design. A prospect theory modelling approach was used to estimate subjective probability weighting and sensitivity to monetary outcomes. Consistent with prospect theory, we found that participants presented a distortion in the subjective weighting of probabilities, i.e., they overweighted low probabilities and underweighted moderate to high probabilities, both in the gain and loss domains. Compared with placebo, sulpiride attenuated this distortion in the gain domain. Across drugs, the groups did not differ in their probability weighting, although gamblers consistently underweighted losing probabilities in the placebo condition. Overall, our results reveal that dopamine D 2 /D 3 receptor antagonism modulates the subjective weighting of probabilities in the gain domain, in the direction of more objective, economically rational decision making.

40 CFR 98.240 - Definition of the source category.

Code of Federal Regulations, 2013 CFR

2013-07-01

... makes methanol, hydrogen, and/or ammonia from synthesis gas is part of the petrochemical source category... hydrogen recovered as product and ammonia. The facility is part of subpart P of this part (Hydrogen... levels of both methanol and ammonia. The facility is part of subpart G of this part (Ammonia...

40 CFR 98.240 - Definition of the source category.

Code of Federal Regulations, 2011 CFR

2011-07-01

... makes methanol, hydrogen, and/or ammonia from synthesis gas is part of the petrochemical source category... hydrogen recovered as product and ammonia. The facility is part of subpart P of this part (Hydrogen... levels of both methanol and ammonia. The facility is part of subpart G of this part (Ammonia...

40 CFR 98.240 - Definition of the source category.

Code of Federal Regulations, 2012 CFR

2012-07-01

... makes methanol, hydrogen, and/or ammonia from synthesis gas is part of the petrochemical source category... hydrogen recovered as product and ammonia. The facility is part of subpart P of this part (Hydrogen... levels of both methanol and ammonia. The facility is part of subpart G of this part (Ammonia...

40 CFR 98.240 - Definition of the source category.

Code of Federal Regulations, 2014 CFR

2014-07-01

... makes methanol, hydrogen, and/or ammonia from synthesis gas is part of the petrochemical source category... hydrogen recovered as product and ammonia. The facility is part of subpart P of this part (Hydrogen... levels of both methanol and ammonia. The facility is part of subpart G of this part (Ammonia...

Stages of behavioural change after direct-to-consumer disease risk profiling: study protocol of two integrated controlled pragmatic trials.

PubMed

Stewart, Kelly F J; Wesselius, Anke; Schols, Annemie M W J; Zeegers, Maurice P

2018-04-19

The incidence and prevalence of chronic diseases have reached epidemic proportions during the last decades and are not expected to diminish. Chronic diseases increasingly affect younger individuals too, with over 40% of all deaths due to non-communicable diseases occurring before the age of 70. This has led to the development of information services aimed at preventive health care, such as Health Potential®. This counselling service estimates a personal disease risk of a carefully selected list of preventable common chronic diseases that have both a genetic and a lifestyle component of development. The results are delivered face-to-face by a lifestyle counsellor, simultaneously stimulating initial steps towards behaviour change. This information can assist in lifestyle decision-making. The primary aim is to study the effect of the Health Potential® service on change in lifestyle behaviour in distinguishable customer populations. The secondary aims are (1) to study the effect of the Health Potential® service on determinants of behaviour change, (2) to study the effect of additional lifestyle counselling on behaviour change and determinants thereof, and (3) to describe the characteristics of the Health Potential® customer. The study consists of two integrated designs: (A) a two-armed non-randomised controlled pre-test/post-test trial (1.5:1 ratio), followed by (B) a two-armed randomised controlled pre-test/post-test trial (1:1 ratio), resulting in three study arms. Participants are clients of local prevention clinics, purchasing a personalised health check (PHC; intervention condition), consisting of Health Potential® and a general health check, or the general health check alone (GHC; control condition) (part A). PHC participants will be randomised to receive four additional lifestyle counselling sessions over a period of 3 months (part B). This research can provide valuable insights into the effectiveness of and possible ways forward in the field of personalised prevention making use of lifestyle interventions enriched with modern genetic advancements. Nederlands Trial Register, NTR6289 and NTR6288 . Registered on 24 February 2017.

Inverse Tomo-Lithography for Making Microscopic 3D Parts

NASA Technical Reports Server (NTRS)

White, Victor; Wiberg, Dean

2003-01-01

According to a proposal, basic x-ray lithography would be extended to incorporate a technique, called inverse tomography, that would enable the fabrication of microscopic three-dimensional (3D) objects. The proposed inverse tomo-lithographic process would make it possible to produce complex shaped, submillimeter-sized parts that would be difficult or impossible to make in any other way. Examples of such shapes or parts include tapered helices, paraboloids with axes of different lengths, and even Archimedean screws that could serve as rotors in microturbines. The proposed inverse tomo-lithographic process would be based partly on a prior microfabrication process known by the German acronym LIGA (lithographie, galvanoformung, abformung, which means lithography, electroforming, molding). In LIGA, one generates a precise, high-aspect ratio pattern by exposing a thick, x-ray-sensitive resist material to an x-ray beam through a mask that contains the pattern. One can electrodeposit metal into the developed resist pattern to form a precise metal part, then dissolve the resist to free the metal. Aspect ratios of 100:1 and patterns into resist thicknesses of several millimeters are possible.

Relevance and reliability of experimental data in human health risk assessment of pesticides.

PubMed

Kaltenhäuser, Johanna; Kneuer, Carsten; Marx-Stoelting, Philip; Niemann, Lars; Schubert, Jens; Stein, Bernd; Solecki, Roland

2017-08-01

Evaluation of data relevance, reliability and contribution to uncertainty is crucial in regulatory health risk assessment if robust conclusions are to be drawn. Whether a specific study is used as key study, as additional information or not accepted depends in part on the criteria according to which its relevance and reliability are judged. In addition to GLP-compliant regulatory studies following OECD Test Guidelines, data from peer-reviewed scientific literature have to be evaluated in regulatory risk assessment of pesticide active substances. Publications should be taken into account if they are of acceptable relevance and reliability. Their contribution to the overall weight of evidence is influenced by factors including test organism, study design and statistical methods, as well as test item identification, documentation and reporting of results. Various reports make recommendations for improving the quality of risk assessments and different criteria catalogues have been published to support evaluation of data relevance and reliability. Their intention was to guide transparent decision making on the integration of the respective information into the regulatory process. This article describes an approach to assess the relevance and reliability of experimental data from guideline-compliant studies as well as from non-guideline studies published in the scientific literature in the specific context of uncertainty and risk assessment of pesticides. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Improving Judgment Calls: Using a Normative Model of Human Inference in the Advanced Preparation of Educational Administrators.

ERIC Educational Resources Information Center

Galvin, Patrick; Ogawa, Rodney T.

The conceptual orientation that guides the University of Utah's field-based doctoral program in educational administration is described in this paper, with a focus on making judgments within the decision-making process. The first part explains the rationale for adopting the conceptual orientation and the second part describes the normative model…

Remember Our Mission: Making Education and Schools Better for Students. The 2009 Yearbook of the National Council of Professors of Educational Administration

ERIC Educational Resources Information Center

Achilles, Charles M., Ed.; Irby, Beverly J., Ed.; Alford, Betty, Ed.; Perreault, George, Ed.

2009-01-01

This volume presents the 2009 Yearbook of the National Council of Professors of Educational Administration. This year's theme is "Remembering Our Mission: Making Education and Schools Better for Students." This Yearbook contains six parts. Part 1, Invited Chapters, includes the following: (1) President's Message: Remembering Our Mission…

Design without Make: A Feasible Direction for American Technology Education

ERIC Educational Resources Information Center

Thompson, Brandon; Varnado, Terri; Matthews, Brian

2010-01-01

This paper describes the second part of a new three-part study of STEM and engineering design research--termed Design-Without-Make--conducted by NC State University in 2009-10 in an NC high school. The hybrid quantitative, qualitative case study is being developed with the purpose of capturing what new technological learning occurs and how the new…

27 CFR 19.524 - Payment of tax by electronic fund transfer.

Code of Federal Regulations, 2010 CFR

2010-04-01

... under this part and parts 26 and 27 of this chapter, shall use a commercial bank in making payment by... shall direct the taxpayer's bank to make an electronic fund transfer in the amount of the taxpayment to... bank early enough for the transfer to be made to the Treasury Account by no later than the close of...

Towards an evaluation framework for Laboratory Information Systems.

PubMed

Yusof, Maryati M; Arifin, Azila

Laboratory testing and reporting are error-prone and redundant due to repeated, unnecessary requests and delayed or missed reactions to laboratory reports. Occurring errors may negatively affect the patient treatment process and clinical decision making. Evaluation on laboratory testing and Laboratory Information System (LIS) may explain the root cause to improve the testing process and enhance LIS in supporting the process. This paper discusses a new evaluation framework for LIS that encompasses the laboratory testing cycle and the socio-technical part of LIS. Literature review on discourses, dimensions and evaluation methods of laboratory testing and LIS. A critical appraisal of the Total Testing Process (TTP) and the human, organization, technology-fit factors (HOT-fit) evaluation frameworks was undertaken in order to identify error incident, its contributing factors and preventive action pertinent to laboratory testing process and LIS. A new evaluation framework for LIS using a comprehensive and socio-technical approach is outlined. Positive relationship between laboratory and clinical staff resulted in a smooth laboratory testing process, reduced errors and increased process efficiency whilst effective use of LIS streamlined the testing processes. The TTP-LIS framework could serve as an assessment as well as a problem-solving tool for the laboratory testing process and system. Copyright © 2016 King Saud Bin Abdulaziz University for Health Sciences. Published by Elsevier Ltd. All rights reserved.

Predictive Psychiatric Genetic Testing in Minors: An Exploration of the Non-Medical Benefits.

PubMed

Manzini, Arianna; Vears, Danya F

2018-03-01

Predictive genetic testing for susceptibility to psychiatric conditions is likely to become part of standard practice. Because the onset of most psychiatric diseases is in late adolescence or early adulthood, testing minors could lead to early identification that may prevent or delay the development of these disorders. However, due to their complex aetiology, psychiatric genetic testing does not provide the immediate medical benefits that current guidelines require for testing minors. While several authors have argued non-medical benefits may play a crucial role in favour of predictive testing for other conditions, little research has explored such a role in psychiatric disorders. This paper outlines the potential non-medical benefits and harms of psychiatric genetic testing in minors in order to consider whether the non-medical benefits could ever make such testing appropriate. Five non-medical themes arise in the literature: psychological impacts, autonomy/self-determination, implications of the biomedical approach, use of financial and intellectual resources, and discrimination. Non-medical benefits were prominent in all of them, suggesting that psychiatric genetic testing in minors may be appropriate in some circumstances. Further research needs to empirically assess these potential non-medical benefits, incorporate minors in the debate, and include normative reflection to evaluate the very purposes and motivations of psychiatric genetic testing in minors.

47 CFR 1.8003 - Providing the FRN in Commission filings.

Code of Federal Regulations, 2011 CFR

2011-10-01

... subpart G of this part, anyone participating in a spectrum auction, making up-front payments or deposits in a spectrum auction, anyone making a payment on an auction loan, anyone making a contribution to...

47 CFR 1.8003 - Providing the FRN in Commission filings.

Code of Federal Regulations, 2010 CFR

2010-10-01

... subpart G of this part, anyone participating in a spectrum auction, making up-front payments or deposits in a spectrum auction, anyone making a payment on an auction loan, anyone making a contribution to...

KSC-2011-2705

NASA Image and Video Library

2011-04-01

CAPE CANAVERAL, Fla. -- During a simulated pad emergency on Launch Pad 39A at NASA's Kennedy Space Center in Florida, STS-134 Mission Specialist Roberto Vittori, with the European Space Agency, front, and a fellow crewmate make their way toward a slidewire basket that would take them to a safe bunker below the pad in an unlikely emergency situation. The emergency training while aboard space shuttle Endeavour is part of a week-long Terminal Countdown Demonstration Test (TCDT). Endeavour's six crew members are targeted to launch April 19 at 7:48 p.m. EDT. They will deliver the Express Logistics Carrier-3, Alpha Magnetic Spectrometer-2 (AMS), a high-pressure gas tank, additional spare parts for the Dextre robotic helper and micrometeoroid debris shields to the International Space Station. This will be the final spaceflight for Endeavour. For more information visit, www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts134/index.html. Photo credit: NASA/Kim Shiflett

KSC-2013-4342

NASA Image and Video Library

2013-12-11

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, from the left, Leandro James, rocket avionics lead, Gary Dahlke, high powered rocket subject matter expert, and Julio Najarro of Mechanical Systems make final adjustments to a small rocket prior to launch as part of Rocket University. The launch will test systems designed by the student engineers. As part of Rocket University, the engineers are given an opportunity to work a fast-track project to develop skills in developing spacecraft systems of the future. As NASA plans for future spaceflight programs to low-Earth orbit and beyond, teams of engineers at Kennedy are gaining experience in designing and flying launch vehicle systems on a small scale. Four teams of five to eight members from Kennedy are designing rockets complete with avionics and recovery systems. Launch operations require coordination with federal agencies, just as they would with rockets launched in support of a NASA mission. Photo credit: NASA/Jim Grossmann

KSC-2013-4343

NASA Image and Video Library

2013-12-11

CAPE CANAVERAL, Fla. -- At NASA's Kennedy Space Center in Florida, from the left, Leandro James, rocket avionics lead, and Julio Najarro of Mechanical Systems make final adjustments to a small rocket prior to launch as part of Rocket University. The launch will test systems designed by the student engineers. As part of Rocket University, the engineers are given an opportunity to work a fast-track project to develop skills in developing spacecraft systems of the future. As NASA plans for future spaceflight programs to low-Earth orbit and beyond, teams of engineers at Kennedy are gaining experience in designing and flying launch vehicle systems on a small scale. Four teams of five to eight members from Kennedy are designing rockets complete with avionics and recovery systems. Launch operations require coordination with federal agencies, just as they would with rockets launched in support of a NASA mission. Photo credit: NASA/Jim Grossmann