Mandible Fractures.

PubMed

Pickrell, Brent B; Serebrakian, Arman T; Maricevich, Renata S

2017-05-01

Mandible fractures account for a significant portion of maxillofacial injuries and the evaluation, diagnosis, and management of these fractures remain challenging despite improved imaging technology and fixation techniques. Understanding appropriate surgical management can prevent complications such as malocclusion, pain, and revision procedures. Depending on the type and location of the fractures, various open and closed surgical reduction techniques can be utilized. In this article, the authors review the diagnostic evaluation, treatment options, and common complications of mandible fractures. Special considerations are described for pediatric and atrophic mandibles.

A reassessment of the Montmaurin-La Niche mandible (Haute Garonne, France) in the context of European Pleistocene human evolution

PubMed Central

Vialet, Amélie; Modesto-Mata, Mario; Martinón-Torres, María; Martínez de Pinillos, Marina

2018-01-01

We here present a comparative study of the Montmaurin-LN Middle Pleistocene mandible (Haute-Garonne, France). This mandible, of which its right and left molar series are preserved in situ, was found in La Niche cave (Montmaurin’s karst system) in 1949, and was first attributed to the ‘Mindel-Riss’ interglacial (= MIS 9 to 11) based on its geological context. Later studies based on geological and faunal evidence have attributed the Montmaurin-LN mandible to MIS 7. Following a detailed morphological and metric comparative study of the mandible in the 1970s, it was interpreted in the light of a still limited fossil record and the prevailing paradigm back then. Waiting for geochronological studies in the forthcoming years, here we review the main morphological and metrical features of this mandible and its molars, which have been reassessed in the framework of a remarkably enlarged Pleistocene fossil record since the mandible was first described, and our current, more in-depth understanding of human evolution in Europe. Using a selection of mandibular features with potential taxonomic signal we have found that the Montmaurin-LN mandible shares only a few derived traits with Neandertals. Our analyses reveal that this mandible is more closely related to the ancient specimens from the African and Eurasian Early and Middle Pleistocene, particularly due to the presence of primitive features of the Homo clade. In contrast, the external morphology of the molars is clearly similar to that of Neandertals. The results are assessed in the light of the present competing hypotheses used to explain the European hominin fossil record. PMID:29337994

Unsuccessful Treatment of Atrophic Mandible Fracture by Use of Improper Materials.

PubMed

de Moraes Ferreira, Ana Carulina Rezende; Garcia Junior, Idelmo Rangel; Silva, Adalberto Novaes; de Carvalho Reis, Erik Neiva Ribeiro; Pires, Willian Ricardo; Bonardi, João Paulo; Borba, Alexandre Meireles

2016-06-01

Fractures of atrophic mandibles are present on the day by day of buccomaxillofacial surgeons. Mandible atrophy occurs due to tooth loss, which over time induces bone resorption leading to a fragile and susceptible to fracture structure. This paper reports the case of a patient victim of face trauma resulting in atrophic mandible fracture with treatment failure through the use of shared load miniplate. Therefore, a new treatment was performed with miniplate of system 2.4 along with bone graft. After 6 months, the patient was rehabilitated with implant-supported prosthesis installation. It is concluded that for successful treatment of atrophic mandible fractures, the use of rigid plates is necessary, allowing an excellent rehabilitation of the stomatognathic system.

A novel approach for planning orthognathic surgery: the integration of dental casts into three-dimensional printed mandibular models.

PubMed

Ayoub, A F; Rehab, M; O'Neil, M; Khambay, B; Ju, X; Barbenel, J; Naudi, K

2014-04-01

A method of producing a composite model consisting of a three-dimensional printed mandible bearing plaster teeth is presented. Printed models were obtained from cone beam computed tomograms (CBCT) of dry human mandibles. The plaster casts of the teeth were obtained from impressions of the teeth of the dry mandibles. The distorted teeth of the printed models were removed and replaced by the plaster casts of the teeth using a simple transfer jig. The accuracy of the composite models obtained from six mandibles was assessed from laser scans. The scans of the dry mandibles and the composite models were superimposed and the magnitude of the discrepancies at six points on the dentition and six on the mandible were obtained. It was concluded that the errors of the method were small enough to be clinically significant. The use of the composite models is illustrated in two clinical cases. Copyright © 2013 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Evaluation of stress changes in the mandible with a fixed functional appliance: a finite element study.

PubMed

Chaudhry, Anshul; Sidhu, Maninder S; Chaudhary, Girish; Grover, Seema; Chaudhry, Nimisha; Kaushik, Ashutosh

2015-02-01

The aim of this study was to evaluate the effects of a fixed functional appliance (Forsus Fatigue Resistant Device; 3M Unitek, Monrovia, Calif) on the mandible with 3-dimensional finite element stress analysis. A 3-dimensional finite element model of the mandible was constructed from the images generated by cone-beam computed tomography of a patient undergoing fixed orthodontic treatment. The changes were studied with the finite element method, in the form of highest von Mises stress and maximum principal stress regions. More areas of stress were seen in the model of the mandible with the Forsus compared with the model of the mandible in the resting stage. This fixed functional appliance studied by finite element model analysis caused increases in the maximum principal stress and the von Mises stress in both the cortical bone and the condylar region of the mandible by more than 2 times. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Onset of mandible and tibia osteoradionecrosis – a comparative pilot study in the rat

PubMed Central

Damek-Poprawa, Monika; Both, Stefan; Wright, Alexander C.; Maity, Amit; Akintoye, Sunday O.

2012-01-01

Objectives Osteoradionecrosis (ORN) is common in the jaws following radiotherapy. We hypothesized that mandible is more susceptible to ORN than tibia based on site-disparity in hypoxic-hypocellular-hypovascular tissue breakdown. Study Design Twelve rats received 50 Gy irradiation to mandible or tibia; 4 of 12 rats further received minor surgical trauma to the irradiated sites. Structural and cellular skeletal changes were assessed with computer tomography, histology and immunostaining. Results Mandible developed ORN with 70% mean bone loss 10 weeks post-irradiation (p < 0.05) while tibia was structurally and radiological intact for 20 weeks post-irradiation. Hypocellularity, hypoxia and oxidative stress were higher in irradiated mandible (p < 0.001) than tibia (p < 0.01) but vascular damage was similar at both skeletal sites. Combined effects of radiation and minor trauma promoted mandibular alveolar bone loss and tibial fracture Conclusion ORN has a more rapid onset in mandible relative to tibia in the rat PMID:23254371

Management of gunshot wounds to the mandible.

PubMed

Peleg, Michael; Sawatari, Yoh

2010-07-01

The gunshot wound to the mandible is a unique traumatic injury. The resultant injury from the gunshot wound is diverse because of the variability of the projectile, motion, velocity, and tissue characteristics. When a high-velocity projectile strikes the mandible, often times the wound will consist of a severely comminuted mandible surrounded by nonvital soft tissues and the implantation of multiple foreign bodies. This represents a challenge for the treating surgeon. The anatomy and function of the mandible make it such that the care of the gunshot wound requires a combination of trauma and reconstructive surgeries. There are varying techniques advocated for the management of gunshot wound to the face. However, for the comminuted mandible fracture sustained from a gunshot wound, an approach involving the fabrication of an occlusal splint, intermaxillary fixation, aggressive debridement of hard and soft tissues, and immediate reconstruction with a titanium plate is a comprehensive approach that can restore the appropriate function and contour of the patient. At the Division of Oral and Maxillofacial Surgery, University of Miami, this approach to the comminuted mandible fracture secondary to the gunshot wound has led to the effective management of this specific subset of injury. The complication rate is comparable with the current literature and provides an advantage as a 1-stage management to restore appropriate function and cosmesis to the patient.

A Volumetric Assessment Using Computed Tomography of Canine and First Molar Roots in Dogs of Varying Weight.

PubMed

Scherer, Ellen; Snyder, Christopher J; Malberg, Jessica; Rigby, Brittney; Hetzel, Scott; Waller, Ken

2018-06-01

Mandibular volume and tooth root volumes were shown to increase at different rates at locations containing the roots of the canine (C) and mesial and distal roots of the first molar (M1). Thirty-six dogs were included in this study. Data were generated using computed tomography at locations of the mandible involving the roots of the C and M1 teeth. Software was used to trace the external surface of the mandible, calculating the volume of the mandible at each location. Similar techniques were used to trace and calculate the volume of the C and M1 roots. Mandible volume, tooth root volume, and root percentage of mandible volume were analyzed and compared using the slopes of the best fit line. At the M1 mesial and distal roots, mandible volume ( P < .001) and root volume ( P < .001) were both noted to increase, with increasing weight at different rates. The rate of change in the root percentage by weight of M1 roots was not different ( P = .214). Each location demonstrated a different increasing rate of change for mandibular volume and increasing root volume. Results show that as patient's weight increases, the mandible and root volumes increase at different rates. Root percentage by volume at all three locations was noted to decrease by the same rate. Canine and M1 roots are proportionally larger than the supporting mandibular bone in smaller patients. Care should be taken to recommend periodontal disease prevention for owners of small dogs and consideration made when performing extractions or other surgery that may destabilize the mandible.

Ameloblastic odontoma in the mandible of a llama

PubMed Central

Step, Douglas L.; Ritchey, Jerry W.; Drost, William Tod; Bahr, Robert J.

2003-01-01

A 4-year-old llama had an aggressive, multiloculated, expansile bone lesion involving the rostral mandible. The mandibular lesion was imaged using radiography and computed tomography. Antemortem diagnosis of an ossifying fibroma was made histologically. Postmortem findings showed the lesion to be limited to the mandible. Final diagnosis was ameloblastic odontoma. PMID:14601679

Anatomical shape analysis of the mandible in Caucasian and Chinese for the production of preformed mandible reconstruction plates.

PubMed

Metzger, Marc C; Vogel, Mathias; Hohlweg-Majert, Bettina; Mast, Hansjörg; Fan, Xianqun; Rüdell, Alexandra; Schlager, Stefan

2011-09-01

The purpose of this study was to evaluate and analyze statistical shapes of the outer mandible contour of Caucasian and Chinese people, offering data for the production of preformed mandible reconstruction plates. A CT-database of 925 Caucasians (male: n=463, female: n=462) and 960 Chinese (male: n=469, female: n=491) including scans of unaffected mandibles were used and imported into the 3D modeling software Voxim (IVS-Solutions, Chemnitz, Germany). Anatomical landmarks (n=22 points for both sides) were set using the 3D view along the outer contour of the mandible at the area where reconstruction plates are commonly located. We used morphometric methods for statistical shape analysis. We found statistical relevant differences between populations including a distinct discrimination given by the landmarks at the mandible. After generating a metric model this shape information which separated the populations appeared to be of no clinical relevance. The metric size information given by ramus length however provided a profound base for the production of standard reconstruction plates. Clustering by ramus length into three sizes and calculating means of these size-clusters seem to be a good solution for constructing preformed reconstruction plates that will fit a vast majority. Copyright © 2010 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Does shape co-variation between the skull and the mandible have functional consequences? A 3D approach for a 3D problem

PubMed Central

Cornette, Raphaël; Baylac, Michel; Souter, Thibaud; Herrel, Anthony

2013-01-01

Morpho-functional patterns are important drivers of phenotypic diversity given their importance in a fitness-related context. Although modularity of the mandible and skull has been studied extensively in mammals, few studies have explored shape co-variation between these two structures. Despite being developmentally independent, the skull and mandible form a functionally integrated unit. In the present paper we use 3D surface geometric morphometric methods allowing us to explore the form of both skull and mandible in its 3D complexity using the greater white-toothed shrew as a model. This approach allows an accurate 3D description of zones devoid of anatomical landmarks that are functionally important. Two-block partial least-squares approaches were used to describe the co-variation of form between skull and mandible. Moreover, a 3D biomechanical model was used to explore the functional consequences of the observed patterns of co-variation. Our results show the efficiency of the method in investigations of complex morpho-functional patterns. Indeed, the description of shape co-variation between the skull and the mandible highlighted the location and the intensity of their functional relationships through the jaw adductor muscles linking these two structures. Our results also demonstrated that shape co-variation in form between the skull and mandible has direct functional consequences on the recruitment of muscles during biting. PMID:23964811

Cortical Bone Morphological and Trabecular Bone Microarchitectural Changes in the Mandible and Femoral Neck of Ovariectomized Rats

PubMed Central

Hsu, Pei-Yu; Tsai, Ming-Tzu; Wang, Shun-Ping; Chen, Ying-Ju; Wu, Jay; Hsu, Jui-Ting

2016-01-01

Objective This study used microcomputed tomography (micro-CT) to evaluate the effects of ovariectomy on the trabecular bone microarchitecture and cortical bone morphology in the femoral neck and mandible of female rats. Materials and Methods Twelve female Wister rats were divided into two groups: the control and ovariectomized groups. The rats in the ovariectomized group received ovariectomy at 8 weeks of age; all the rats were sacrificed at 20 weeks of age, and their mandibles and femurs were removed and scanned using micro-CT. Four microstructural trabecular bone parameters were measured for the region below the first mandibular molar and the femoral neck region: bone volume fraction (BV/TV), trabecular thickness (TbTh), trabecular separation (TbSp), and trabecular number (TbN). In addition, four cortical bone parameters were measured for the femoral neck region: total cross-sectional area (TtAr), cortical area (CtAr), cortical bone area fraction (CtAr/TtAr), and cortical thickness (CtTh). The CtTh at the masseteric ridge was used to assess the cortical bone morphology in the mandible. The trabecular bone microarchitecture and cortical bone morphology in the femoral necks and mandibles of the control group were compared with those of the ovariectomized group. Furthermore, Spearman’s correlation (rs) was conducted to analyze the correlation between the osteoporosis conditions of the mandible and femoral neck. Results Regarding the trabecular bone microarchitectural parameters, the BV/TV of the trabecular bone microarchitecture in the femoral necks of the control group (61.199±11.288%, median ± interquartile range) was significantly greater than that of the ovariectomized group (40.329±5.153%). Similarly, the BV/TV of the trabecular bone microarchitecture in the mandibles of the control group (51.704±6.253%) was significantly greater than that of the ovariectomized group (38.486±9.111%). Furthermore, the TbSp of the femoral necks in the ovariectomized group (0.185±0.066 mm) was significantly greater than that in the control group (0.130±0.026mm). Similarly, the TbSp of the mandibles in the ovariectomized group (0.322±0.047mm) was significantly greater than that in the control group (0.285±0.041mm). However, the TbTh and TbN trends for the mandibles and femoral necks were inconsistent between the control and ovariectomized groups. Regarding the cortical bone morphology parameters, the TtAr of the femoral necks in the ovariectomized group was significantly smaller than that in the control group. There was no significant difference in the TtAr, CtAr, or CtTh of the femoral necks between the control and ovariectomized groups, and no significant difference in the CtTh of the mandibles between the control and ovariectomized groups. Moreover, the BV/TV and TbSp of the mandibles were highly correlated with those of the femurs (rs = 0.874 and rs = 0.755 for BV/TV and TbSp, respectively). Nevertheless, the TbTh, TbN, and CtTh of the mandibles were not correlated with those of the femoral necks. Conclusion After the rats were ovariectomized, osteoporosis of the trabecular bone microarchitecture occurred in their femurs and mandibles; however, ovariectomy did not influence the cortical bone morphology. In addition, the parametric values of the trabecular bone microarchitecture in the femoral necks were highly correlated with those of the trabecular bone microarchitecture in the mandibles. PMID:27127909

The mandible and its foramen: anatomy, anthropology, embryology and resulting clinical implications.

PubMed

Lipski, M; Tomaszewska, I M; Lipska, W; Lis, G J; Tomaszewski, K A

2013-11-01

The aim of this paper is to summarise the knowledge about the anatomy, embryology and anthropology of the mandible and the mandibular foramen and also to highlight the most important clinical implications of the current studies regarding anaesthesia performed in the region of the mandible. An electronic journal search was undertaken to identify all the relevant studies published in English. The search included MEDLINE and EMBASE databases and years from 1950 to 2012. The subject search used a combination of controlled vocabulary and free text based on the search strategy for MEDLINE using key words: 'mandible', 'mandibular', 'foramen', 'anatomy', 'embryology', 'anthropology', and 'mental'. The reference lists of all the relevant studies and existing reviews were screened for additional relevant publications. Basing on relevant manuscripts, this short review about the anatomy, embryology and anthropology of the mandible and the mandibular foramen was written.

Automatic segmentation of mandible in panoramic x-ray.

PubMed

Abdi, Amir Hossein; Kasaei, Shohreh; Mehdizadeh, Mojdeh

2015-10-01

As the panoramic x-ray is the most common extraoral radiography in dentistry, segmentation of its anatomical structures facilitates diagnosis and registration of dental records. This study presents a fast and accurate method for automatic segmentation of mandible in panoramic x-rays. In the proposed four-step algorithm, a superior border is extracted through horizontal integral projections. A modified Canny edge detector accompanied by morphological operators extracts the inferior border of the mandible body. The exterior borders of ramuses are extracted through a contour tracing method based on the average model of mandible. The best-matched template is fetched from the atlas of mandibles to complete the contour of left and right processes. The algorithm was tested on a set of 95 panoramic x-rays. Evaluating the results against manual segmentations of three expert dentists showed that the method is robust. It achieved an average performance of [Formula: see text] in Dice similarity, specificity, and sensitivity.

A custom-made temporomandibular joint prosthesis for fabrication by selective laser melting: Finite element analysis.

PubMed

Xu, Xiangliang; Luo, Danmei; Guo, Chuanbin; Rong, Qiguo

2017-08-01

A novel and custom-made selective laser melting (SLM) 3D-printed alloplastic temporomandibular joint (TMJ) prosthesis is proposed. The titanium-6aluminium-4vanadium (Ti-6Al-4V) condyle component and ultra-high molecular weight polyethylene (UHMWPE) fossa component comprised the total alloplastic TMJ replacement prosthesis. For the condyle component, an optimized tetrahedral open-porous scaffold with combined connection structures, i.e. an inlay rod and an onlay plate, between the prosthesis and remaining mandible was designed. The trajectory of movement of the intact condyle was assessed via kinematic analysis to facilitate the design of the fossa component. The behaviours of the intact mandible and mandible with the prosthesis were compared. The biomechanical behaviour was analysed by assessing the stress distribution on the prosthesis and strain distribution on the mandible. After muscle force was applied, the magnitude of the compressive strain on the condyle neck of the mandible with the prosthesis was lower than that on the condyle neck of the intact mandible, with the exception of the area about the screws; additionally, the magnitude of the strain at the scaffold-bone interface was relatively high. Copyright © 2017. Published by Elsevier Ltd.

Failure location prediction by finite element analysis for an additive manufactured mandible implant.

PubMed

Huo, Jinxing; Dérand, Per; Rännar, Lars-Erik; Hirsch, Jan-Michaél; Gamstedt, E Kristofer

2015-09-01

In order to reconstruct a patient with a bone defect in the mandible, a porous scaffold attached to a plate, both in a titanium alloy, was designed and manufactured using additive manufacturing. Regrettably, the implant fractured in vivo several months after surgery. The aim of this study was to investigate the failure of the implant and show a way of predicting the mechanical properties of the implant before surgery. All computed tomography data of the patient were preprocessed to remove metallic artefacts with metal deletion technique before mandible geometry reconstruction. The three-dimensional geometry of the patient's mandible was also reconstructed, and the implant was fixed to the bone model with screws in Mimics medical imaging software. A finite element model was established from the assembly of the mandible and the implant to study stresses developed during mastication. The stress distribution in the load-bearing plate was computed, and the location of main stress concentration in the plate was determined. Comparison between the fracture region and the location of the stress concentration shows that finite element analysis could serve as a tool for optimizing the design of mandible implants. Copyright © 2015 IPEM. Published by Elsevier Ltd. All rights reserved.

Outcomes of vascularized bone graft reconstruction of the mandible in bisphosphonate-related osteonecrosis of the jaws.

PubMed

Seth, Rahul; Futran, Neal D; Alam, Daniel S; Knott, P Daniel

2010-11-01

To describe the clinical entity and therapeutic challenges of bisphosphonate-related osteonecrosis of the jaws (BRONJ). The use of vascularized bone grafts for reconstruction of the mandible in extensive BRONJ is proposed. Multi-institutional retrospective review. Patients undergoing mandible reconstruction with vascularized bone grafts after segmental mandible resection for BRONJ were evaluated. Mandible reconstruction was only performed on patients with intractable pain, fistulae, or pathologic fracture and after failure of comprehensive conservative therapy. No patients had a history of primary or metastatic head and neck malignancy or radiation therapy. Bone union was established with follow-up radiography. Eleven patients met inclusion criteria. Mean patient age was 61.3 years. Median follow-up was 13.9 months. All patients had undergone therapy with bisphosphonates and had no other identifiable cause of mandible osteonecrosis. Preoperatively, pathologic mandible fractures were present in 73% of patients, and 36% had orocutaneous fistulae. Fibula osteocutaneous flaps were used in all cases with no failures. In all patients, bony union was demonstrated clinically and radiographically. Postoperative wound complications occurred in 36% of patients but were all treated successfully with conservative therapy. There was no BRONJ recurrence within the study follow-up period. Osteonecrosis is a significant complication of bisphosphonate therapy, and current literature does not support vascularized reconstruction. We demonstrate that vascularized bone graft reconstruction with the fibula free flap offers a high success rate of bony union and fistula closure and should be offered to selected patients with advanced cases of BRONJ.

Characterization of the perinatal mandible growth pattern: preliminary results.

PubMed

Remy, F; Godio-Raboutet, Y; Verna, E; Gorincour, G; Bonnaure, P; Adalian, P; Guyot, L; Thollon, L

2018-06-01

The fetal development of the mandible is nowadays quite understood, and it is already known that craniofacial growth reaches its highest rate during the first 5 years of postnatal life. However, there are very few data focusing on the perinatal period. Thus, the present article is addressing this concern by studying the mandible morphology and its evolution around the birth with a morphometric method. Thirty-one mandibles modelled in three dimensions from post-mortem CT-scans were analyzed. This sample was divided into two subgroups composed of, respectively, 15 fetuses (aged from 36 gestational weeks), and 16 infants (aged to 12 postnatal weeks). 17 distances, 3 angles, and 8 thicknesses were measured via the prior set of 14 landmarks, illustrating the whole mandible morphology. Although this methodology may depend on the image reconstruction quality, its reliability was demonstrated with low variability in the results. It highlighted two distinct growth patterns around birth: fetuses mandibles do not significantly evolve during the perinatal period, whereas, from the second postnatal weeks, most of the measurements increased in a homogeneous tendency and in correlation with age. The protocol developed in this study highlighted the morphologic evolution of the mandible around birth, identifying a different growth pattern from 2 postnatal weeks, probably because of the progressive activation of masticatory muscles and tongue. However, considering the small sample size, these results should be thorough, so identification and management of anatomic abnormalities could eventually be achieved.

An analysis of beak shape variation in two ages of domestic turkeys (Meleagris gallopavo) using landmark-based geometric morphometrics.

PubMed

Dalton, Hillary A; Wood, Benjamin J; Widowski, Tina M; Guerin, Michele T; Torrey, Stephanie

2017-01-01

The objective of this study was to assess beak shape variation in domestic turkeys (Meleagris gallopavo) and determine the effects of age, sex, and beak size on beak shape variation using geometric morphometrics. Dorsal and right lateral images were taken of 2442 turkeys at 6 and 18.5 weeks of age. Landmarks were digitized in tpsDig in three analyses of the dorsal upper mandible, lateral upper mandible, and lateral lower mandible shape of each turkey at both ages. The coordinate data were then subjected to a principal components analysis (PCA), multivariate regression, and a canonical variates analysis (CVA) with a Procrustes ANOVA in MorphoJ. For the dorsal images, three principal components (PCs) showed beak shape variation ranged from long, narrow, and pointed to short, wide, and blunt upper mandibles at both ages (6 weeks: 95.36%, 18.5 weeks: 92.21%). Three PCs showed the lateral upper mandible shape variation ranged from long, wide beaks with long, curved beak tips to short, narrow beaks with short, pointed beak tips at both ages (6 weeks: 94.91%, 18.5 weeks: 94.33%). Three PCs also explained 97.80% (6 weeks) and 97.11% (18.5 weeks) of the lateral lower mandible shape variation ranging from wide and round to narrow and thin lower mandibles with superior/inferior beak tip shifts. Beak size accounted for varying proportions of the beak shape variation (0.96-54.76%; P < 0.0001) in the three analyses of each age group. For all the analyses, the CVA showed sexual dimorphism in beak shape (P < 0.0001) with female upper mandibles appearing wider and blunter dorsally with long, curved beak tips laterally. Whereas male turkey upper mandibles had a narrow, pointed dorsal appearance and short, pointed beak tips laterally. Future applications of beak shape variability could have a genetic and welfare value by incorporating beak shape variation to select for specific turkey beak phenotypes as an alternative to beak treatment.

An analysis of beak shape variation in two ages of domestic turkeys (Meleagris gallopavo) using landmark-based geometric morphometrics

PubMed Central

Widowski, Tina M.; Guerin, Michele T.

2017-01-01

The objective of this study was to assess beak shape variation in domestic turkeys (Meleagris gallopavo) and determine the effects of age, sex, and beak size on beak shape variation using geometric morphometrics. Dorsal and right lateral images were taken of 2442 turkeys at 6 and 18.5 weeks of age. Landmarks were digitized in tpsDig in three analyses of the dorsal upper mandible, lateral upper mandible, and lateral lower mandible shape of each turkey at both ages. The coordinate data were then subjected to a principal components analysis (PCA), multivariate regression, and a canonical variates analysis (CVA) with a Procrustes ANOVA in MorphoJ. For the dorsal images, three principal components (PCs) showed beak shape variation ranged from long, narrow, and pointed to short, wide, and blunt upper mandibles at both ages (6 weeks: 95.36%, 18.5 weeks: 92.21%). Three PCs showed the lateral upper mandible shape variation ranged from long, wide beaks with long, curved beak tips to short, narrow beaks with short, pointed beak tips at both ages (6 weeks: 94.91%, 18.5 weeks: 94.33%). Three PCs also explained 97.80% (6 weeks) and 97.11% (18.5 weeks) of the lateral lower mandible shape variation ranging from wide and round to narrow and thin lower mandibles with superior/inferior beak tip shifts. Beak size accounted for varying proportions of the beak shape variation (0.96–54.76%; P < 0.0001) in the three analyses of each age group. For all the analyses, the CVA showed sexual dimorphism in beak shape (P < 0.0001) with female upper mandibles appearing wider and blunter dorsally with long, curved beak tips laterally. Whereas male turkey upper mandibles had a narrow, pointed dorsal appearance and short, pointed beak tips laterally. Future applications of beak shape variability could have a genetic and welfare value by incorporating beak shape variation to select for specific turkey beak phenotypes as an alternative to beak treatment. PMID:28934330

Bone remodelling in Neanderthal mandibles from the El Sidrón site (Asturias, Spain)

PubMed Central

Martinez-Maza, Cayetana; Rosas, Antonio; García-Vargas, Samuel; Estalrrich, Almudena; de la Rasilla, Marco

2011-01-01

Skull morphology results from the bone remodelling mechanism that underlies the specific bone growth dynamics. Histological study of the bone surface from Neanderthal mandible specimens of El Sidrón (Spain) provides information about the distribution of the remodelling fields (bone remodelling patterns or BRP) indicative of the bone growth directions. In comparison with other primate species, BRP shows that Neanderthal mandibles from the El Sidrón (Spain) sample present a specific BRP. The interpretation of this map allows inferences concerning the growth directions that explain specific morphological traits of the Neanderthal mandible, such as its quadrangular shape and the posterior location of the mental foramen. PMID:21307043

Fibre Bragg grating sensing and finite element analysis of the biomechanics of the mandible

NASA Astrophysics Data System (ADS)

Silva, J. C. C.; Ramos, A.; Carvalho, L.; Nogueira, R. N.; Ballu, A.; Mesnard, M.; Pinto, J. L.; Kalinowski, Hypolito J.; Simoes, J. A.

2005-05-01

This paper describes the application of fibre Bragg grating (FBG) sensors to measure strains at the outer surface of a mandible. The strains were correlated to identical ones obtained with a numerical finite element model. For this purpose, a synthetic mandible was used and 4 Bragg sensors were glued to the mandible. Strain patterns were assessed for different load configurations which included the forces of the masseter and temporal muscles and occlusion loads on different tooth (incisor, canine and molar). Overall the strains obtained using different measuring methods were identical, namely for the case of symmetric loading. When loading was non-symmetric, strain differences were observed at one sensor.

The edentulous mandible opposed by natural maxillary teeth: a report of six cases treated with implant-retained prostheses.

PubMed

Clark, R K; Comfort, M B

1994-01-01

Dental restoration of the edentulous mandible opposing natural maxillary teeth is often associated with a number of problems, particularly in the occlusion, and an accelerated rate of alveolar bone resorption in the edentulous mandible resulting from occlusal loading. The advent of osseointegrated implants would seem to provide a new means of treating these cases. Accordingly, the cases of six patients for whom either fixed partial dentures or over-dentures supported by Brånemark implants were provided, are reviewed. Three of the mandibles were normal and three had bone grafts. Results so far indicate that this is a viable alternative for treating such cases.

Complete Midline Cleft of Lower Lip, Mandible, Tongue, Floor of Mouth with Neck Contracture: A Case Report and Review of Literature

PubMed Central

Rao, Anantheswar Y. N.

2015-01-01

Midline cleft of the lower lip and mandible is an extremely rare condition. Since 1819, when the first case was reported by Couronne, fewer than 80 cases have been described in the world literature so far. The cleft has also been described as facial cleft no. 30 by Paul Tessier. The condition varies in severity from a mild variety in which there is a submucous cleft and notching in the lower lip to a severe variety, involving the tongue, floor of the mouth, mandible, absent hyoid, atrophic neck muscles, and sternum. In this case report, a female child having complete midline cleft of the lower lip and mandible, with bifid tongue stuck to the floor of the mouth, absent hyoid bone and flexion contracture band extending from the confluence of the tip of the tongue, floor of the mouth, cleft mandible to the manubrium sterni is described, with special emphasis on surgical planning and management. PMID:26576245

The use of computer-aided design/manufacturing (CAD/CAM) technology to aid in the reconstruction of congenitally deficient pediatric mandibles: A case series.

PubMed

Gougoutas, Alexander J; Bastidas, Nicholas; Bartlett, Scott P; Jackson, Oksana

2015-12-01

Microvascular reconstruction of the pediatric mandible, particularly when necessitated by severe, congenital hypoplasia, presents a formidable challenge. Complex cases, however, may be simplified by computer-aided design/computer-aided manufacturing (CAD/CAM) assisted surgical planning. This series represents the senior authors' preliminary experiences with CAD/CAM assisted, microvascular reconstruction of the pediatric mandible. Presented are two patients with hemifacial/bifacial microsomia, both with profound mandibular hypoplasia, who underwent CAD/CAM assisted reconstruction of their mandibles with vascularized fibula flaps. Surgical techniques, CAD/CAM routines employed, complications, and long-term outcomes are reported. Successful mandibular reconstructions were achieved in both patients with centralization of their native mandibles and augmentation of deficient mandibular subunits. No long-term complications were observed. CAD/CAM technology can be utilized in pediatric mandibular reconstruction, and is particularly beneficial in cases of profound, congenital hypoplasia requiring extensive, multi-planar, bony reconstructions. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Elastic properties and apparent density of human edentulous maxilla and mandible

PubMed Central

Seong, Wook-Jin; Kim, Uk-Kyu; Swift, James Q.; Heo, Young-Cheul; Hodges, James S.; Ko, Ching-Chang

2009-01-01

The aim of this study aim was to determine whether elastic properties and apparent density of bone differ in different anatomical regions of the maxilla and mandible. Additional analyses assessed how elastic properties and apparent density were related. Four pairs of edentulous maxilla and mandibles were retrieved from fresh human cadavers. Bone samples from four anatomical regions (maxillary anterior, maxillary posterior, mandibular anterior, mandibular posterior) were obtained. Elastic modulus (EM) and hardness (H) were measured using the nano-indentation technique. Bone samples containing cortical and trabecular bone were used to measure composite apparent density (cAD) using Archimedes’ principle. Statistical analyses used repeated measures ANOVA and Pearson correlations. Bone physical properties differed between regions of the maxilla and mandible. Generally, mandible had higher physical property measurements than maxilla. EM and H were higher in posterior than in anterior regions; the reverse was true for cAD. Posterior maxillary cAD was significantly lower than that in the three other regions. PMID:19647417

Elastic properties and apparent density of human edentulous maxilla and mandible.

PubMed

Seong, W-J; Kim, U-K; Swift, J Q; Heo, Y-C; Hodges, J S; Ko, C-C

2009-10-01

The aim of this study was to determine whether elastic properties and apparent density of bone differ in different anatomical regions of the maxilla and mandible. Additional analyses assessed how elastic properties and apparent density were related. Four pairs of edentulous maxilla and mandibles were retrieved from fresh human cadavers. Bone samples from four anatomical regions (maxillary anterior, maxillary posterior, mandibular anterior, mandibular posterior) were obtained. Elastic modulus (EM) and hardness (H) were measured using the nano-indentation technique. Bone samples containing cortical and trabecular bone were used to measure composite apparent density (cAD) using Archimedes' principle. Statistical analyses used repeated measures ANOVA and Pearson correlations. Bone physical properties differed between regions of the maxilla and mandible. Generally, mandible had higher physical property measurements than maxilla. EM and H were higher in posterior than in anterior regions; the reverse was true for cAD. Posterior maxillary cAD was significantly lower than that in the three other regions.

A Descriptive Morphometric Approach of the Skull and Mandible of the Common Opossum (Didelphis Marsupialis Linnaeus, 1758) in the Caribbean and its Clinical Application during Regional Anaesthesia.

PubMed

Mohamed, Reda

2018-03-09

The aim of this study was to determine the morphometric values of the skull and the mandible of the common opossum from the Caribbean island of Trinidad and Tobago. The skulls and mandibles were obtained from ten opossums captured for research purposes. The skulls and mandibles were prepared and cleaned using standard method. Some anatomical landmarks of the skulls and mandibles were identified and measured. The results were important for identification of the common opossum via comparison and discussion of our results with that of other marsupial species. Furthermore, the results had clinical importance with regard to regional nerve blocks of the infraorbital, inferior alveolar, and mental nerves for dental extraction and head surgery. This study concluded that by using the anatomical landmarks of the infraorbital and mental foramina it will be easier for the veterinarian surgeons during the application of local anesthetic agent for the infraorbital, inferior alveolar, and mental nerve blocks.

A Descriptive Morphometric Approach of the Skull and Mandible of the Common Opossum (Didelphis Marsupialis Linnaeus, 1758) in the Caribbean and its Clinical Application during Regional Anaesthesia

PubMed Central

Mohamed, Reda

2018-01-01

The aim of this study was to determine the morphometric values of the skull and the mandible of the common opossum from the Caribbean island of Trinidad and Tobago. The skulls and mandibles were obtained from ten opossums captured for research purposes. The skulls and mandibles were prepared and cleaned using standard method. Some anatomical landmarks of the skulls and mandibles were identified and measured. The results were important for identification of the common opossum via comparison and discussion of our results with that of other marsupial species. Furthermore, the results had clinical importance with regard to regional nerve blocks of the infraorbital, inferior alveolar, and mental nerves for dental extraction and head surgery. This study concluded that by using the anatomical landmarks of the infraorbital and mental foramina it will be easier for the veterinarian surgeons during the application of local anesthetic agent for the infraorbital, inferior alveolar, and mental nerve blocks. PMID:29522485

Asymmetric larval head and mandibles of Hydrophilus acuminatus (Insecta: Coleoptera, Hydrophilidae): Fine structure and embryonic development.

PubMed

Sato, Shun'ichi; Inoda, Toshio; Niitsu, Shuhei; Kubota, Souichirou; Goto, Yuji; Kobayashi, Yukimasa

2017-11-01

The larvae of a water scavenger beetle, Hydrophilus acuminatus, have strongly asymmetric mandibles; the right one is long and slender, whereas the left one is short and stout. The fine structure and embryonic development of the head capsule and mandibles of this species were examined using light and scanning electron microscopy, and asymmetries in shape were detected in these structures applying an elliptic Fourier analysis. The larval mandibles are asymmetric in the following aspects: whole length, the number, structure and arrangement of retinacula (inner teeth), and size and shape of both the molar and incisor regions. The larval head is also asymmetric; the left half of the head capsule is larger than the right, and the left adductor muscle of the mandible is much thicker than the right. The origin and developmental process of asymmetric mandibles were traced in developing embryos whose developmental period is about 270 h and divided into 10 stages. Mandibular asymmetries are produced by the cumulative effects of six stepwise modifications that occur from about 36% of the total developmental time onward. The significance of these modifications was discussed with respect to the functional advantages of asymmetries and the phylogeny of members of the Hydrophilidae. Copyright © 2017 Elsevier Ltd. All rights reserved.

A numerical simulation of the effect of using porous superelastic Nitinol and stiff Titanium fixation hardware on the bone remodeling

NASA Astrophysics Data System (ADS)

Raad, Bahram; Shayesteh Moghaddam, Narges; Elahinia, Mohammad

2016-04-01

The aim of this article is to investigate the effect of two different fixation hardware materials on bone remodeling after a mandibular reconstruction surgery and to restore the mandible's function, healthy appearance, mastication, swallowing, breathing, and speech. The hypothesis is that using fixation hardware with stiffness close to that of the surrounding bone will result in a more successful healing process in the mandible bone. The finite element model includes the material properties and forces of the cancellous bone, cortical bone, ligaments, muscles, and teeth. The reconstruction surgery is modeled by including the fixation hardware and the grafted bone. In the sectioned mandible, to best mimic the geometry of the mandible, two single barrel grafts are placed at the top of each other to form a double barrel graft set. Two different materials were used as the mandibular fixation parts, stiff Ti-6Al-4V, and porous superelastic Nickel-Titanium (NiTi) alloys. A comparison of these two alloys demonstrates that using porous NiTi alloy as the fixation part results in a faster healing pace. Furthermore, the density distribution in the mandibular bone after the healing process is more similar to the normal mandible density distribution. The simulations results indicate that the porous superelastic NiTi fixation hardware transfers and distributes the existing forces on the mandible bone more favorably. The probability of stress shielding and/or stress concentration decrease. This type of fixation hardware, therefore, is more appropriate for mandible bone reconstruction surgery. These predictions are in agreement with the clinical observations.

Effect of the mandible on mouthguard measurements of head kinematics.

PubMed

Kuo, Calvin; Wu, Lyndia C; Hammoor, Brad T; Luck, Jason F; Cutcliffe, Hattie C; Lynall, Robert C; Kait, Jason R; Campbell, Kody R; Mihalik, Jason P; Bass, Cameron R; Camarillo, David B

2016-06-14

Wearable sensors are becoming increasingly popular for measuring head motions and detecting head impacts. Many sensors are worn on the skin or in headgear and can suffer from motion artifacts introduced by the compliance of soft tissue or decoupling of headgear from the skull. The instrumented mouthguard is designed to couple directly to the upper dentition, which is made of hard enamel and anchored in a bony socket by stiff ligaments. This gives the mouthguard superior coupling to the skull compared with other systems. However, multiple validation studies have yielded conflicting results with respect to the mouthguard׳s head kinematics measurement accuracy. Here, we demonstrate that imposing different constraints on the mandible (lower jaw) can alter mouthguard kinematic accuracy in dummy headform testing. In addition, post mortem human surrogate tests utilizing the worst-case unconstrained mandible condition yield 40% and 80% normalized root mean square error in angular velocity and angular acceleration respectively. These errors can be modeled using a simple spring-mass system in which the soft mouthguard material near the sensors acts as a spring and the mandible as a mass. However, the mouthguard can be designed to mitigate these disturbances by isolating sensors from mandible loads, improving accuracy to below 15% normalized root mean square error in all kinematic measures. Thus, while current mouthguards would suffer from measurement errors in the worst-case unconstrained mandible condition, future mouthguards should be designed to account for these disturbances and future validation testing should include unconstrained mandibles to ensure proper accuracy. Copyright © 2016 Elsevier Ltd. All rights reserved.

Bite of the cats: relationships between functional integration and mechanical performance as revealed by mandible geometry.

PubMed

Piras, Paolo; Maiorino, Leonardo; Teresi, Luciano; Meloro, Carlo; Lucci, Federico; Kotsakis, Tassos; Raia, Pasquale

2013-11-01

Cat-like carnivorous mammals represent a relatively homogeneous group of species whose morphology appears constrained by exclusive adaptations for meat eating. We present the most comprehensive data set of extant and extinct cat-like species to test for evolutionary transformations in size, shape and mechanical performance, that is, von Mises stress and surface traction, of the mandible. Size and shape were both quantified by means of geometric morphometrics, whereas mechanical performance was assessed applying finite element models to 2D geometry of the mandible. Additionally, we present the first almost complete composite phylogeny of cat-like carnivorans for which well-preserved mandibles are known, including representatives of 35 extant and 59 extinct species of Felidae, Nimravidae, and Barbourofelidae. This phylogeny was used to test morphological differentiation, allometry, and covariation of mandible parts within and among clades. After taking phylogeny into account, we found that both allometry and mechanical variables exhibit a significant impact on mandible shape. We also tested whether mechanical performance was linked to morphological integration. Mechanical stress at the coronoid process is higher in sabertoothed cats than in any other clade. This is strongly related to the high degree of covariation within modules of sabertooths mandibles. We found significant correlation between integration at the clade level and per-clade averaged stress values, on both original data and by partialling out interclade allometry from shapes when calculating integration. This suggests a strong interaction between natural selection and the evolution of developmental and functional modules at the clade level.

Comparison of 3D reconstruction of mandible for pre-operative planning using commercial and open-source software

NASA Astrophysics Data System (ADS)

Abdullah, Johari Yap; Omar, Marzuki; Pritam, Helmi Mohd Hadi; Husein, Adam; Rajion, Zainul Ahmad

2016-12-01

3D printing of mandible is important for pre-operative planning, diagnostic purposes, as well as for education and training. Currently, the processing of CT data is routinely performed with commercial software which increases the cost of operation and patient management for a small clinical setting. Usage of open-source software as an alternative to commercial software for 3D reconstruction of the mandible from CT data is scarce. The aim of this study is to compare two methods of 3D reconstruction of the mandible using commercial Materialise Mimics software and open-source Medical Imaging Interaction Toolkit (MITK) software. Head CT images with a slice thickness of 1 mm and a matrix of 512x512 pixels each were retrieved from the server located at the Radiology Department of Hospital Universiti Sains Malaysia. The CT data were analysed and the 3D models of mandible were reconstructed using both commercial Materialise Mimics and open-source MITK software. Both virtual 3D models were saved in STL format and exported to 3matic and MeshLab software for morphometric and image analyses. Both models were compared using Wilcoxon Signed Rank Test and Hausdorff Distance. No significant differences were obtained between the 3D models of the mandible produced using Mimics and MITK software. The 3D model of the mandible produced using MITK open-source software is comparable to the commercial MIMICS software. Therefore, open-source software could be used in clinical setting for pre-operative planning to minimise the operational cost.

Characterizing mandibular growth using three-dimensional imaging techniques and anatomic landmarks

PubMed Central

Kelly, Michael P.; Vorperian, Houri K.; Wang, Yuan; Tillman, Katelyn K.; Werner, Helen M.; Chung, Moo K.; Gentry, Lindell R.

2017-01-01

Objective To provide quantitative data on the multi-planar growth of the mandible, this study derived accurate linear and angular mandible measurements using landmarks on three dimensional (3D) mandible models. This novel method was used to quantify 3D mandibular growth and characterize the emergence of sexual dimorphism. Design Cross-sectional and longitudinal imaging data were obtained from a retrospective computed tomography (CT) database for 51 typically developing individuals between the ages of one and nineteen years. The software Analyze was used to generate 104 3DCT mandible models. Eleven landmarks placed on the models defined six linear measurements (lateral condyle, gonion, and endomolare width, ramus and mental depth, and mandible length) and three angular measurements (gonion, gnathion, and lingual). A fourth degree polynomial fit quantified growth trends, its derivative quantified growth rates, and a composite growth model determined growth types (neural/cranial and somatic/skeletal). Sex differences were assessed in four age cohorts, each spanning five years, to determine the ontogenetic pattern producing sexual dimorphism of the adult mandible. Results Mandibular growth trends and growth rates were non-uniform. In general, structures in the horizontal plane displayed predominantly neural/cranial growth types, whereas structures in the vertical plane had somatic/skeletal growth types. Significant prepubertal sex differences in the inferior aspect of the mandible dissipated when growth in males began to outpace that of females at eight to ten years of age, but sexual dimorphism re-emerged during and after puberty. Conclusions This 3D analysis of mandibular growth provides preliminary normative developmental data for clinical assessment and craniofacial growth studies. PMID:28161602

Insight of Dogs' Inner Mandible Anatomy using Mathematical Models.

PubMed

Santos, M; Carreira, L M

2016-12-01

This study was performed in a sample of 20 dogs (n = 20) and aimed to: (1) characterize the mandible height (Mh), mandibular canal height (MCh) and distance between the inter-dental alveolar margin and the mandibular canal (dIAM-MC) dimensions, and (2) to develop mathematical models that express the insight's mandible anatomy of those important mandible structural elements allowing the prediction of their dimensions using physical parameters such as patient body weight (Wg) and the canine tooth width at the free gingival margin level-(wCGM). Lateral-view X-rays of both sides of the skull were taken for all the individuals. Three mathematical prediction models were developed to calculate Mh, MCh and dIAM-MC. Achieved proportions of the mandible considered parameters regarding its height were of 36.45% for MCh, 50.90% for dMAI-MC and 12.65% for vMC. Statistically significant differences were registered between the Wg and wCGM (P = 0.00), Mh (P = 0.00), MCh (P = 0.00) and dIAM-MC (P = 0.00). Only the Wg presented a strong correlation with the wCGM (R = 0.58), Mh (R = 0.70), dIAM-MC (R = 0.60) and MCh (R = 0.68). These models will allow a clinician to estimate the size of the mandible structures by only using data obtained during the physiological examination, with a sufficiently high prediction capacity and a very low standard error. The study points out the relationships of physiological parameters such as Wg and wCGM with mandible anatomical structural elements considered as important in oral surgery. The results of this study give the surgeon a new additional tool providing more information on the mandible anatomical structures and its relationships. This reduces the risk of iatrogenic lesions during the oral surgical procedures and improves patient safety. © 2016 Blackwell Verlag GmbH.

A mandible from the Middle Pleistocene Hexian site and its significance in relation to the variability of Asian Homo erectus.

PubMed

Liu, Wu; Martinón-Torres, María; Kaifu, Yousuke; Wu, Xiujie; Kono, Reiko T; Chang, Chun-Hsiang; Wei, Pianpian; Xing, Song; Huang, Wanbo; Bermúdez de Castro, José María

2017-04-01

This study presents the first detailed morphological description and comparison of a Middle Pleistocene hominin mandibular fragment (PA 831) and associated teeth from the Hexian site in Eastern China. We aim to investigate where the Hexian mandible fits within the genus Homo variability in the light of an increased and better characterized Asian fossils record. Comparative samples include Pleistocene Homo mandibles and teeth from Africa, Asia, and Europe, as well as earlier African hominins (Australopithecus and early Homo) and Holocene recent humans. Both conventional morphological description and metric analysis were used. In addition, virtual reconstructions of the enamel dentine junction (EDJ) surface, pulp cavity, and roots with micro-CT were used to the mandible and teeth. The Hexian mandible is characterized by a plesiomorphic structural pattern for the Homo clade, with strong corpus robustness and a subparallel and low-positioned mylohyoid line that differentiates the swollen subalveolar planum from the shallow subalveolar fossa. Features that are derived compared to early Homo include a moderately curved dental arcade, a well-developed lateral prominence placed at the M 2 -M 3 level, and multiple mental foramina. The Hexian mandible's complex enamel surface and strong, stout root structure are primitive traits for the Homo clade. Finally, the highly crenulated "dendrite-like" EDJ found in the molars may represent a dental feature specific to the continental Asian Homo erectus, but more data is needed to confirm this. Mandibular and dental features indicate that the Hexian mandible and teeth differ from northern Chinese H. erectus and European Middle Pleistocene hominins, but show some affinities with the Early Pleistocene specimens from Africa (Homo ergaster) and Java (H. erectus), as well as the Middle-Late Pleistocene mandible from Penghu, Taiwan. Compared to contemporaneous continental Asian hominin populations, the Hexian fossils may represent the survival of a primitive hominin, with more primitive morphologies than other contemporaneous or some chronologically older Asian hominin specimens. © 2017 Wiley Periodicals, Inc.

Cap’n’collar differentiates the mandible from the maxilla in the beetle Tribolium castaneum

PubMed Central

2012-01-01

Background The biting mandible of the arthropods is thought to have evolved in the ancestor of the insects, crustaceans and myriapods: the Mandibulata. A unique origin suggests a common set of developmental genes will be required to pattern the mandible in different arthropods. To date we have functional studies on patterning of the mandibular segment of Drosophila melanogaster showing in particular the effects of the gene cap’n’collar (cnc), however, the dipteran head is far from representative of insects or of more distantly related mandibulates; Drosophila does not even possess a mandibular appendage. To study the development of a more representative insect mandible, we chose the red flour beetle Tribolium castaneum and investigated the function of the Tribolium orthologs of cap’n’collar (Tc-cnc) and the Hox gene Deformed (Tc-Dfd). In order to determine the function of Tc-cnc and Tc-Dfd, transcripts were knocked down by maternal RNA interference (RNAi). The effects of gene knockdown were examined in the developing embryos and larvae. The effect of Tc-cnc and Tc-Dfd knockdown on the expression of other genes was determined by using in situ hybridization on Tribolium embryos. Results Our analyses show that Tc-cnc is required for specification of the identity of the mandibular segment of Tribolium and differentiates the mandible from maxillary identity. Loss of Tc-cnc function results in a transformation of the mandible to maxillary identity as well as deletion of the labrum. Tc-Dfd and the Tribolium homolog of proboscipedia (Tc-mxp = maxillopedia), Hox genes that are required to pattern the maxillary appendage, are expressed in a maxilla-like manner in the transformed mandible. Tribolium homologs of paired (Tc-prd) and Distal-less (Tc-Dll) that are expressed in the endites and telopodites of embryonic appendages are also expressed in a maxilla-like manner in the transformed mandible. We also show that Tc-Dfd is required to activate the collar of Tc-cnc expression in the mandibular segment but not the cap expression in the labrum. Tc-Dfd is also required for the activation of Tc-prd in the endites of the mandible and maxillary appendages. Conclusions Tc-cnc is necessary for patterning the mandibular segment of Tribolium. Together, Tc-cnc and Tc-Dfd cooperate to specify mandibular identity, as in Drosophila. Expression patterns of the homologs of cnc and Dfd are conserved in mandibulate arthropods suggesting that the mandible specifying function of cnc is likely to be conserved across the mandibulate arthropods. PMID:23114106

“Partial duplication of lower lip and hemimandible” A rare case

PubMed Central

Nayak, Bibhuti Bhusan; Mohanty, Nilamani

2012-01-01

Duplication of mandible and lower lip is a very rare congenital entity. We report an extremely uncommon case of Congenital Duplication of Lower lip and Mandible in a 3 year old girl, who was treated surgically in a single stage for correction of both lip and mandible. This was a commissure preserving single staged procedure. The Surgical procedure, the problems related to this anomaly and the embryology are discussed. PMID:23450337

Microdamage of the cortical bone during mini-implant insertion with self-drilling and self-tapping techniques: a randomized controlled trial.

PubMed

Yadav, Sumit; Upadhyay, Madhur; Liu, Sean; Roberts, Eugene; Neace, William P; Nanda, Ravindra

2012-05-01

The purpose of this research was to evaluate microdamage accumulation after mini-implant placement by self-drilling (without a pilot hole) and self-tapping (screwed into a pilot hole) insertion techniques. The null hypothesis was that the mini-implant insertion technique would have no influence on microcrack accumulation and propagation in the cortical bones of the maxillae and mandibles of adult hounds. Mini-implants (n = 162; diameter, 1.6 mm; length, 6 mm) were placed in the maxillae and mandibles of 9 hounds (12-14 months old) with self-drilling and self-tapping insertion techniques. The techniques were randomly assigned to the left or the right side of each jaw. Each hound received 18 mini-implants (10 in the mandible, 8 in the maxilla). Histomorphometric parameters including total crack length and crack surface density were measured. The null hypothesis was rejected in favor of an alternate hypothesis: that the self-drilling technique results in more microdamage (microcracks) accumulation in the adjacent cortical bone in both the maxilla and the mandible immediately after mini-implant placement. A cluster level analysis was used to analyze the data on the outcome measured. Since the measurements were clustered within dogs, a paired-samples t test was used to analyze the average differences between insertion methods at both jaw locations. A significance level of 0.05 was used for both analyses. The self-drilling technique resulted in greater total crack lengths in both the maxilla and the mandible (maxilla: mean difference, 18.70 ± 7.04 μm/mm(2); CI, 13.29-24.11; mandible: mean difference, 22.98 ± 6.43 μm/mm(2); CI, 18.04-27.93; P <0.05), higher crack surface density in both the maxilla and the mandible (maxilla: mean difference, 10.39 ± 9.16 μm/mm(2); CI, 3.34-17.43; mandible: mean difference, 11.28 ± 3.41 μm/mm(2); CI, 8.65-13.90; P <0.05). This study demonstrated greater microdamage in the cortical bones of adult hounds in both the maxilla and the mandible by the self-drilling insertion technique compared with the self-tapping technique. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

[Normal and pathologic mandible development: practical deductions in maxillo-dento-facial orthopedics].

PubMed

Salagnac, Jean-Michel

2016-09-01

The mandible consists of different segments, each of which possess its own specific characteristics regarding emergence, ossification during growth and pathologies. Orthodontists need to be very familiar with these developmental anomalies if they are to avoid failure in their orthopedic or orthodontic treatments and in order to understand the reasons for the lack of success of "conventional" treatments. Each segment must develop correctly if the mandible is to achieve optimal development and occupy a normal position within the cranio-facial complex. The position of the mandible in the cranio-facial block is also conditioned by its attachment to the base of the skull. Combining a detailed semiologic study and a three-dimensional architectural and structural radiologic analysis of clinical cases, this article investigates the various anomalies affecting the mandibular segments and their impact on the craniofacial structure as a whole. An understanding of these anomalies and this analytical method can enable clinicians to perform early diagnosis, avoid undertaking orthopedic and orthodontic treatments which are likely to fail, understand the reasons for unsuccessful "conventional" treatments, provide an orthopedic-surgical guide and make it possible to inform patients correctly. Anomalies affecting the growth of the mandible and its position on the cranial base and their impact on cranio-facial skeletal balance are clearly revealed by structural and architectural analysis, which pinpoints the different clinical elements in skeletal Class II et III cases. In maxilla-dento-facial orthopedics when confronted with a pathology of mandibular origin, it is essential to carefully study the radiographs of each segment of the mandible, to seek out the minor forms of the anomalies and to calculate the position of the mandible on the cranial base relative to the neighboring structures; the skull, the cervical vertebrae and the maxilla. © EDP Sciences, SFODF, 2016.

Random Positional Variation Among the Skull, Mandible, and Cervical Spine With Treatment Progression During Head-and-Neck Radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ahn, Peter H.; Ahn, Andrew I.; Lee, C. Joe

2009-02-01

Purpose: With 54{sup o} of freedom from the skull to mandible to C7, ensuring adequate immobilization for head-and-neck radiotherapy (RT) is complex. We quantify variations in skull, mandible, and cervical spine movement between RT sessions. Methods and Materials: Twenty-three sequential head-and-neck RT patients underwent serial computed tomography. Patients underwent planned rescanning at 11, 22, and 33 fractions for a total of 93 scans. Coordinates of multiple bony elements of the skull, mandible, and cervical spine were used to calculate rotational and translational changes of bony anatomy compared with the original planning scan. Results: Mean translational and rotational variations on rescanningmore » were negligible, but showed a wide range. Changes in scoliosis and lordosis of the cervical spine between fractions showed similar variability. There was no correlation between positional variation and fraction number and no strong correlation with weight loss or skin separation. Semi-independent rotational and translation movement of the skull in relation to the lower cervical spine was shown. Positioning variability measured by means of vector displacement was largest in the mandible and lower cervical spine. Conclusions: Although only small overall variations in position between head-and-neck RT sessions exist on average, there is significant random variation in patient positioning of the skull, mandible, and cervical spine elements. Such variation is accentuated in the mandible and lower cervical spine. These random semirigid variations in positioning of the skull and spine point to a need for improved immobilization and/or confirmation of patient positioning in RT of the head and neck.« less

Mandible-first sequence in bimaxillary orthognathic surgery: a systematic review.

PubMed

Borba, A M; Borges, A H; Cé, P S; Venturi, B A; Naclério-Homem, M G; Miloro, M

2016-04-01

The sequencing of bimaxillary orthognathic surgery remains controversial, although the traditional maxilla-first approach is performed routinely. The goal of this study was to present a systematic review of the mandible-first sequence in bimaxillary orthognathic surgery, to provide data that may assist in the decision as to which jaw should undergo osteotomy first in bimaxillary orthognathic surgery cases. A literature search was conducted for articles published in the English language, reporting the use of the altered sequence for bimaxillary orthognathic surgery (mandible-first), using the following descriptors: 'orthognathic' and 'double-jaw', 'orthognathic' and 'two-jaw', 'orthognathic' and 'mandible-first', 'orthognathic' and 'bimaxillary'. Eight hundred eighty-seven abstracts were initially identified and were evaluated for inclusion according to the proposed inclusion criteria. After evaluation of these abstracts and relevant references, six publications met the criteria for consideration. Performing mandible-first surgery in bimaxillary orthognathic cases dates back to the 1970s; however the decision regarding the jaw to be operated on first seems to rely on accurate preoperative planning based upon the surgeon's experience and preference. While there appear to be significant theoretical advantages to support the use of the altered orthognathic sequence (mandible-first), future prospective studies on its reliability, accuracy, and short- and long-term outcomes are required. Copyright © 2015 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Preliminary observations on the mandibles of palaemonoid shrimp (Crustacea: Decapoda: Caridea: Palaemonoidea)

PubMed Central

De Grave, Sammy; Johnson, Magnus L.

2015-01-01

The mandibles of caridean shrimps have been widely studied in the taxonomy and functional biology of the group. Within the Palaemonoidea the mandibles reach a high level of structural diversity reflecting the diverse lifestyles within the superfamily. However, the majority of studies have been restricted to light microscopy, with the ultrastructure at finer levels poorly known. This study investigates the mandible of nine species belonging to six of the recognised families of the Palaemonoidea using SEM and analyses the results in a phylogenetic and dietary framework. The results of the study indicate that little phylogenetic information is conveyed by the structure of the mandible, but that its form is influenced by primary food sources of each species. With the exception of Anchistioides antiguensis, all species examined possessed cuticular structures at the distal end of the pars molaris (molar process). Five types of cuticular structures are recognised herein, each with a unique form, but variable in number, placement and arrangement. Each type is presumed to have a different function which is likewise related to diet. PMID:25825676

Surgical Management of Duplication of the Pituitary Gland-Plus Syndrome With Epignathus, Cleft Palate, Duplication of Mandible, and Lobulated Tongue.

PubMed

Noguchi, Tadahide; Sugiyama, Tomoko; Sasaguri, Ken-Ichi; Ono, Shigeru; Maeda, Kosaku; Nishino, Hiroshi; Jinbu, Yoshinori; Mori, Yoshiyuki

2017-03-01

A 1-day-old male infant was referred to our department for evaluation of multiple malformations in his oral cavity. He was diagnosed duplication of the pituitary gland-plus syndrome with epignathus, cleft palate, duplication of the mandible, and a lobulated tongue. A thumb-sized mass lesion was visible on the hard palate. The duplicated mandible and lower lip was fused at the midline. The alveolar ridge was protruding through a wide-cleft soft palate involving the uvula. Further examination showed a lobulated tongue, which was seen behind the duplicated part of the mandible. Five days after birth, tracheotomy and epignathus resection were performed. At 7 months of age, the excess tissue of the duplicated mandible was resected at the area of adhesion on the lingual side, and the duplicated tongue and lip were reconstructed. A palatoplasty was performed at 20 months of age. Thereafter, the patient's progress was uneventful, with no abnormality in swallowing. No recurrence of epignathus has been observed during 2 years of follow-up.

Evidence-based medicine: Mandible fractures.

PubMed

Morrow, Brad T; Samson, Thomas D; Schubert, Warren; Mackay, Donald R

2014-12-01

After studying this article, the participant should be able to: 1. Describe the anatomy and subunits of the mandible. 2. Review the cause and epidemiology of mandible fractures. 3. Discuss the preoperative evaluation and diagnostic imaging. 4. Understand the principles and techniques of mandible fracture reduction and fixation. The management of mandibular fractures has undergone significant improvement because of advancements in plating technology, imaging, and instrumentation. As the techniques in management continue to evolve, it is imperative for the practicing physician to remain up-to-date with the growing body of scientific literature. The objective of this Maintenance of Certification article is to present a review of the literature so that the physician may make treatment recommendation based on the best evidence available. Pediatric fractures have been excluded from this article.

Scaling of rotational inertia of primate mandibles.

PubMed

Ross, Callum F; Iriarte-Diaz, Jose; Platts, Ellen; Walsh, Treva; Heins, Liam; Gerstner, Geoffrey E; Taylor, Andrea B

2017-05-01

The relative importance of pendulum mechanics and muscle mechanics in chewing dynamics has implications for understanding the optimality criteria driving the evolution of primate feeding systems. The Spring Model (Ross et al., 2009b), which modeled the primate chewing system as a forced mass-spring system, predicted that chew cycle time would increase faster than was actually observed. We hypothesized that if mandibular momentum plays an important role in chewing dynamics, more accurate estimates of the rotational inertia of the mandible would improve the accuracy with which the Spring Model predicts the scaling of primate chew cycle period. However, if mass-related momentum effects are of negligible importance in the scaling of primate chew cycle period, this hypothesis would be falsified. We also predicted that greater "robusticity" of anthropoid mandibles compared with prosimians would be associated with higher moments of inertia. From computed tomography scans, we estimated the scaling of the moment of inertia (I j ) of the mandibles of thirty-one species of primates, including 22 anthropoid and nine prosimian species, separating I j into the moment about a transverse axis through the center of mass (I xx ) and the moment of the center of mass about plausible axes of rotation. We found that across primates I j increases with positive allometry relative to jaw length, primarily due to positive allometry of jaw mass and I xx , and that anthropoid mandibles have greater rotational inertia compared with prosimian mandibles of similar length. Positive allometry of I j of primate mandibles actually lowers the predictive ability of the Spring Model, suggesting that scaling of primate chew cycle period, and chewing dynamics in general, are more strongly influenced by factors other than scaling of inertial properties of the mandible, such as the dynamic properties of the jaw muscles and neural control. Differences in cycle period scaling between chewing and locomotion systems reinforce the suggestion that displacement and force control are more important in the design of feeding systems than energetics and speed. Copyright © 2017 Elsevier Ltd. All rights reserved.

An assessment of early mandibular growth.

PubMed

Hutchinson, E F; L'Abbé, E N; Oettlé, A C

2012-04-10

Quantification of skeletal data has been shown to be an effective and reliable method of demonstrating variation in human growth as well as for monitoring and interpreting growth. In South Africa as well as internationally, few researchers have assessed mandibular growth in late fetal period and early childhood and therefore standards for growth and age determination in these groups are limited. The purpose of this study was to evaluate growth in the mandible from the period of 31 gestational weeks to 36 months postnatal. A total of 74 mandibles were used. Dried mandibles were sourced from the Raymond A. Dart Collection (University of Witwatersrand), and cadaveric remains were obtained from the Universities of Pretoria and the Witwatersrand. The sample was divided into four groups; 31-40 gestational weeks (group 1), 0-11 months (group 2), 12-24 months (group 3), and 25-36 months (group 4). Twenty-one osteological landmarks were digitized using a MicroScribe G2. Ten standard measurements were created and included: the maximum length of mandible, mandibular body length and width, mandibular notch width and depth, mental foramen to inferior border of mandible, mandibular basilar widths bigonial and biantegonial, bigonial width of mental foramen and mental angle. Data were analyzed using PAST statistical software and Morphologika2 v2.5. Statistically significant differences were noted in the linear measurements for all group comparisons except between groups 3 and 4. The mandible morphologically changed from a round, smooth contour anteriorly to adopt a more sharp and narrow adult shape. A progressive increase in the depth and definition of the mandibular arch was also noted. In conclusion, the mandible initially grows to accommodate the developing tongue (up to 11 months), progressive dental eruption and mastication from 12 to 36 months. Mastication is associated with muscle mass development; this would necessitate an increase in the dimensions of the mandibular notch and associated muscle attachment sites. These findings might be valuable in the estimation of age in unidentified individuals and to monitor prenatal growth of the mandible for the early diagnosis of conditions associated with stunted mandibular growth. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Adaptive plasticity in the mouse mandible.

PubMed

Anderson, Philip S L; Renaud, Sabrina; Rayfield, Emily J

2014-04-18

Plasticity, i.e. non-heritable morphological variation, enables organisms to modify the shape of their skeletal tissues in response to varying environmental stimuli. Plastic variation may also allow individuals to survive in the face of new environmental conditions, enabling the evolution of heritable adaptive traits. However, it is uncertain whether such a plastic response of morphology constitutes an evolutionary adaption itself. Here we investigate whether shape differences due to plastic bone remodelling have functionally advantageous biomechanical consequences in mouse mandibles. Shape characteristics of mandibles from two groups of inbred laboratory mice fed either rodent pellets or ground pellets mixed with jelly were assessed using geometric morphometrics and mechanical advantage measurements of jaw adductor musculature. Mandibles raised on diets with differing food consistency showed significant differences in shape, which in turn altered their biomechanical profile. Mice raised on a soft food diet show a reduction in mechanical advantage relative to mice of the same inbred strain raised on a typical hard food diet. Further, the soft food eaters showed lower levels of integration between jaw regions, particularly between the molar and angular region relative to hard food eaters. Bone remodelling in mouse mandibles allows for significant shifts in biomechanical ability. Food consistency significantly influences this process in an adaptive direction, as mice raised on hard food develop jaws better suited to handle hard foods. This remodelling also affects the organisation of the mandible, as mice raised on soft food appear to be released from developmental constraints showing less overall integration than those raised on hard foods, but with a shift of integration towards the most solicited regions of the mandible facing such a food, namely the incisors. Our results illustrate how environmentally driven plasticity can lead to adaptive functional changes that increase biomechanical efficiency of food processing in the face of an increased solicitation. In contrast, decreased demand in terms of food processing seems to release developmental interactions between jaw parts involved in mastication, and may generate new patterns of co-variation, possibly opening new directions to subsequent selection. Overall, our results emphasize that mandible shape and integration evolved as parts of a complex system including mechanical loading food resource utilization and possibly foraging behaviour.

The Additively Manufactured Porous NiTi and Ti-6Al-4V in Mandibular Reconstruction: Introducing the Stiffness-Matched and the Variable Stiffness Options for the Reconstruction Plates

NASA Astrophysics Data System (ADS)

Jahadakbar, Ahmadreza

Mandibular reconstruction surgery is a part of treatment for cancer, tumor, and all the cases that involve segmental defects. One of the most common approaches for the reconstruction surgery is to resect the segmental defect and use a double barrel fibula graft to fill the resected region and recover the mandible's normal functions, such as chewing. The grafted bone is connected to the host mandible, using the standard of the care Ti-6Al-4V fixation plates. The fixation plates are available in the form of prefabricated plates and also patient-specific plates in the market. Due to the high stiffness of the Ti-6Al-4V plates in comparison with the mandible bone and the grafted bone, the loading distribution on the whole reconstructed mandible will be different from a healthy mandible. The high stiffness fixation hardware carries a great portion of the loading and causes stress shielding on the grafted bone and the surrounding host bone. Based on the bone remodeling theory, the stress shielding on the cortical bone causes bone resorption and may lead to implant failure. A solution to reduce the risk of implant failure is to use a low stiffness biocompatible material for the mandibular fixation plates. We have proposed the use of stiffness-matched, porous NiTi fixation plates either in the form of patient-specific or prefabricated, instead of the standard of the care Ti-6Al-4V plates. NiTi is a biocompatible material that has a low stiffness in comparison with Ti-6Al-4V and also benefits from the superelastic feature. Superelasticity, which can also be found in bone tissues, allows the material to recover large strains (up to 8%) and increases the shock absorption. In this thesis, we have evaluated the use of proposed fixation hardware by comparing it with a healthy mandible and a reconstructed mandible using the standard method. To this end, first different models including a healthy mandible, a reconstructed mandible using patient-specific Ti-6Al-4V fixation hardware, a reconstructed mandible using stiffness-match patient-specific hardware, and several prefabricated fixation plates were prepared. After verification of the models, the cases of reconstructed mandibles were used to simulate different periods, including during healing, and post-healing periods. Also, different loading conditions including highest bite force on the first molar tooth, rest condition, and also highest bite force on a dental implant right in the grafted bone were simulated. Also, the theory of applying pretention to the fixation plates was evaluated using the finite element method. We also designed and evaluated a set of prefabricated fixation kits with various stiffness option. After all these finite element simulations and having the CAD files of the porous fixation plates, the possibility of fabrication of the proposed hardware, in both forms of patient-specific, and prefabricated plates was evaluated using selective laser melting.

[The application of the asymmetry index in assessment of mandible size in difficult diagnostic case].

PubMed

Syryńska, Maria; Szyszka, Liliana; Post, Marcin

2008-01-01

Recognised and unrecognised bone diseases including maxilla and/or mandible may have influance on formation of malocclusions. In first stages of diseases the patients are directed or report for orthodontic treatment which starting need additional examinations mainly pantomographic views. In spite doing necessary additional examinations sometimes we can't recognise disorder like patient presented in our study. Then we can observate and if changes will begin disturbing the function--surgical intervention. Establishment of orthodontic treatment plan and explanation if during three years the dimension of asymmetry resulting from wrong growth right and left part of mandible and the estimation the rate of changes happening in this time. In study we used the own asymmetry index to estimate the patient's pantomographic views who reported for orthodontic treatment because of occlusion disorders, facial asymmetry and discomfort of mastication and speech. The telerentgenographic lateral views in right and posterior-anterior (PA) projection were also done. We measured and estimated the own asymmetry index on pantomographic views. The radiographs reveal the asymmetry of left part of mandible. The comparative analysis of pantomographic views enables the estimation of changes happening in time and the telerentgenographic lateral views, PA and computer tomography (CT) confirm changes which increase the asymmetry. The asymmetry index is the instrument which enable the estimation of growth changes in mandible with unsteady aetiology and histopathological unrecognised, allow determine the growth rate and facilitate the permanent control the dimension of mandible asymmetry.

[Three-dimensional finite element study on the change of glossopharyngeum in patient with obstructive sleep apnea hypopnea syndrome during titrated mandible advancement].

PubMed

Yang, Suixing; Feng, Jing; Zhang, Zuo; Qu, Aili; Gong, Miao; Tang, Jie; Fan, Junheng; Li, Songqing; Zhao, Yanling

2013-04-01

To construct a three-dimensional finite element model of the upper airway and adjacent structure of an obstructive sleep apnea hypopnea syndrome (OSAHS) patient for biomechanical analysis. And to study the influence of glossopharyngeum of an OSAHS patient with three-dimensional finite element model during titrated mandible advancement. DICOM format image information of an OSAHS patient's upper airway was obtained by thin-section CT scanning and digital image processing were utilized to construct a three-dimensional finite element model by Mimics 10.0, Imageware 10.0 and Ansys software. The changes and the law of glossopharyngeum were observed by biomechanics and morphology after loading with titrated mandible advancement. A three-dimensional finite element model of the adjacent upper airway structure of OSAHS was established successfully. After loading, the transverse diameter of epiglottis tip of glossopharyngeum increased significantly, although the sagittal diameter decreased correspondingly. The principal stress was mainly distributed in anterior wall of the upper airway. The location of principal stress concentration did not change significantly with the increasing of distance. The stress of glossopharyngeum increased during titrated mandible advancement. A more precise three-dimensional finite model of upper airway and adjacent structure of an OSAHS patient is established and improved efficiency by Mimics, Imageware and Ansys software. The glossopharyngeum of finite element model of OSAHS is analyzed by titrated mandible advancement and can effectively show the relationship between mandible advancement and the glossopharyngeum.

[The influences upon the passive tensile of the masticatory muscles and ligaments by Herbst appliance under various bite reconstruction--a three dimensional finite element analysis].

PubMed

Song, J; Zhao, Z; Hu, L; Jiang, W; Fan, Y; Chen, J

2001-02-01

This study aimed to provide some biomechanical references for the clinical use and improvement of Herbst appliance. The three-dimensional model of the 'Temporomandibular joint mandible Herbst appliance system' was set up by SUPER SAP software (version 9.3). On this model, the passive tensile in the masticatory muscles and ligaments were analyzed under various bit reconstruction designed according to specified advanced displacement and vertical bite opening. When Herbst appliance drove the mandible forward, there was not any tensile in the medial, lateral pterygoid and the collateral ligament, while the temporalis, the deep paret of masseter, the stylomandibular ligament, and the sphenomandibular ligament were passively drawn. Under various bite reconstruction, the passive tensile in the medial temporalis, the posterior temporalis, the stylomandibular ligament and the sphenomandibular ligament increased with the amount of the advancement of the mandible; The passive tensile in the posterior temporalis and the deep part of masseter increased with the amount of vertical bite opening of the mandible. The StL, SpL, PT and AT played an important role in functional reconstruction of mandible by Herbst. All five group of bite reconstruction (3-7 mm advancement, 4-2 mm vertical bite opening of the mandible) designed by this study can be selected in clinic according to the patient's capability of adaptation, the extent of malocclusion and the potential and direction of growth.

Estimation of optimal nasotracheal tube depth in adult patients.

PubMed

Ji, Sung-Mi

2017-12-01

The aim of this study was to estimate the optimal depth of nasotracheal tube placement. We enrolled 110 patients scheduled to undergo oral and maxillofacial surgery, requiring nasotracheal intubation. After intubation, the depth of tube insertion was measured. The neck circumference and distances from nares to tragus, tragus to angle of the mandible, and angle of the mandible to sternal notch were measured. To estimate optimal tube depth, correlation and regression analyses were performed using clinical and anthropometric parameters. The mean tube depth was 28.9 ± 1.3 cm in men (n = 62), and 26.6 ± 1.5 cm in women (n = 48). Tube depth significantly correlated with height (r = 0.735, P < 0.001). Distances from nares to tragus, tragus to angle of the mandible, and angle of the mandible to sternal notch correlated with depth of the endotracheal tube (r = 0.363, r = 0.362, and r = 0.546, P < 0.05). The tube depth also correlated with the sum of these distances (r = 0.646, P < 0.001). We devised the following formula for estimating tube depth: 19.856 + 0.267 × sum of the three distances (R 2 = 0.432, P < 0.001). The optimal tube depth for nasotracheally intubated adult patients correlated with height and sum of the distances from nares to tragus, tragus to angle of the mandible, and angle of the mandible to sternal notch. The proposed equation would be a useful guide to determine optimal nasotracheal tube placement.

The role of the titanium functionally dynamic bridging plate for the treatment of the atrophic mandible fractures.

PubMed

Hachleitner, Johannes; Enzinger, Simon; Brandtner, Christian; Gaggl, Alexander

2014-07-01

The role of the titanium functionally dynamic bridging plate (TFDBP) in the fracture treatment of the severely atrophic mandible was assessed retrospectively. In 28 consecutive patients with fractures of a severely atrophic mandible fixation was carried out with TFDBPs. Twenty-one patients with 27 fractures were included in the study and then followed up for complications and the progress of fracture healing for 17 months postoperatively on average. There was only one case that required plate removal. All patients showed bone healing 3 months after surgery. The mental nerve sensation improved in 12 out of 23 fractures that had presented with nerve function disturbance. Every patient who had dentures prior to sustaining the fracture was able to return to denture wearing 3 weeks after surgery. No major complications occurred. A high proportion of bone healing with a low complication rate was observed with the use of TFDBPs in the treatment of severely atrophic mandible fractures. The TFDBP is an excellent alternative to conventional plating of the severely atrophic mandible. Copyright © 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Reduced somatosensory impairment by piezosurgery during orthognathic surgery of the mandible.

PubMed

Brockmeyer, Phillipp; Hahn, Wolfram; Fenge, Stefan; Moser, Norman; Schliephake, Henning; Gruber, Rudolf Matthias

2015-09-01

This clinical trial aimed to test the hypothesis that piezosurgery causes reduced nerval irritations and, thus, reduced somatosensory impairment when used in orthognathic surgery of the mandible. To this end, 37 consecutive patients with Angle Class II and III malocclusion were treated using bilateral sagittal split osteotomies (BSSO) of the mandible. In a split mouth design, randomized one side of the mandible was operated using a conventional saw, while a piezosurgery device was used on the contralateral side. In order to test the individual qualities of somatosensory function, quantitative sensory testings (QSTs) were performed 1 month, 6 months and 1 year after surgery. A comparison of the data using a two-way analysis of variance (ANOVA) revealed a significant reduction in postoperative impairment in warm detection threshold (WDT) (P = 0.046), a decreased dynamic mechanical allodynia (ALL) (P = 0.002) and a decreased vibration detection threshold (VDT) (P = 0.030) on the piezosurgery side of the mandible as opposed to the conventionally operated control side. In the remaining QSTs, minor deviations from the preoperative baseline conditions and a more rapid regression could be observed. Piezosurgery caused reduced somatosensory impairment and a faster recovery of somatosensory functions in the present investigation.

Osteosclerotic bone dysplasia (melorheostosis) of the mandible.

PubMed

Kuttenberger, J J; Hardt, N; Gebbers, J-O; Hofer, B

2006-12-01

Melorheostosis is a linear bone dysplasia of unknown origin that may be associated with soft-tissue alterations. Although any part of the skeleton can be affected, this condition is rarely observed in the craniofacial region. Only seven cases of melorheostosis with craniofacial involvement have been reported and cranial manifestation only is even rarer. To the authors' knowledge, manifestation in the mandible only has not yet been documented. A patient with isolated melorheostosis of the mandible with characteristic symptomatic bone pain is presented. The clinical, radiological and histological findings are described and possible therapeutic options are discussed.

[Anatomical and radiological studies on additional mandible teeth anesthesia considering innervation variability].

PubMed

Tarasenko, S V; Dydykin, S S; Kuzin, A V

2013-01-01

The paper presents studies on nutritional foramina of the mandible. Some nutritional foramina located in the frontal mandibular region on the lingual surface and containing significant blood vessels and nerves are found to be more typical for teeth-bearing mandible. In retromolar area in case of third molars presence intraosseous canals were revealed leading to inferior alveolar nerve canal. One should consider intraligamental and lingual anesthesia by lower incisors extraction. Intraosseous anesthesia and retromolar area infiltration significantly increase anesthesia efficiency by third molar extraction.

Developmental link between sex and nutrition; doublesex regulates sex-specific mandible growth via juvenile hormone signaling in stag beetles.

PubMed

Gotoh, Hiroki; Miyakawa, Hitoshi; Ishikawa, Asano; Ishikawa, Yuki; Sugime, Yasuhiro; Emlen, Douglas J; Lavine, Laura C; Miura, Toru

2014-01-01

Sexual dimorphisms in trait expression are widespread among animals and are especially pronounced in ornaments and weapons of sexual selection, which can attain exaggerated sizes. Expression of exaggerated traits is usually male-specific and nutrition sensitive. Consequently, the developmental mechanisms generating sexually dimorphic growth and nutrition-dependent phenotypic plasticity are each likely to regulate the expression of extreme structures. Yet we know little about how either of these mechanisms work, much less how they might interact with each other. We investigated the developmental mechanisms of sex-specific mandible growth in the stag beetle Cyclommatus metallifer, focusing on doublesex gene function and its interaction with juvenile hormone (JH) signaling. doublesex genes encode transcription factors that orchestrate male and female specific trait development, and JH acts as a mediator between nutrition and mandible growth. We found that the Cmdsx gene regulates sex differentiation in the stag beetle. Knockdown of Cmdsx by RNA-interference in both males and females produced intersex phenotypes, indicating a role for Cmdsx in sex-specific trait growth. By combining knockdown of Cmdsx with JH treatment, we showed that female-specific splice variants of Cmdsx contribute to the insensitivity of female mandibles to JH: knockdown of Cmdsx reversed this pattern, so that mandibles in knockdown females were stimulated to grow by JH treatment. In contrast, mandibles in knockdown males retained some sensitivity to JH, though mandibles in these individuals did not attain the full sizes of wild type males. We suggest that moderate JH sensitivity of mandibular cells may be the default developmental state for both sexes, with sex-specific Dsx protein decreasing sensitivity in females, and increasing it in males. This study is the first to demonstrate a causal link between the sex determination and JH signaling pathways, which clearly interact to determine the developmental fates and final sizes of nutrition-dependent secondary-sexual characters.

Developmental Link between Sex and Nutrition; doublesex Regulates Sex-Specific Mandible Growth via Juvenile Hormone Signaling in Stag Beetles

PubMed Central

Gotoh, Hiroki; Miyakawa, Hitoshi; Ishikawa, Asano; Ishikawa, Yuki; Sugime, Yasuhiro; Emlen, Douglas J.; Lavine, Laura C.; Miura, Toru

2014-01-01

Sexual dimorphisms in trait expression are widespread among animals and are especially pronounced in ornaments and weapons of sexual selection, which can attain exaggerated sizes. Expression of exaggerated traits is usually male-specific and nutrition sensitive. Consequently, the developmental mechanisms generating sexually dimorphic growth and nutrition-dependent phenotypic plasticity are each likely to regulate the expression of extreme structures. Yet we know little about how either of these mechanisms work, much less how they might interact with each other. We investigated the developmental mechanisms of sex-specific mandible growth in the stag beetle Cyclommatus metallifer, focusing on doublesex gene function and its interaction with juvenile hormone (JH) signaling. doublesex genes encode transcription factors that orchestrate male and female specific trait development, and JH acts as a mediator between nutrition and mandible growth. We found that the Cmdsx gene regulates sex differentiation in the stag beetle. Knockdown of Cmdsx by RNA-interference in both males and females produced intersex phenotypes, indicating a role for Cmdsx in sex-specific trait growth. By combining knockdown of Cmdsx with JH treatment, we showed that female-specific splice variants of Cmdsx contribute to the insensitivity of female mandibles to JH: knockdown of Cmdsx reversed this pattern, so that mandibles in knockdown females were stimulated to grow by JH treatment. In contrast, mandibles in knockdown males retained some sensitivity to JH, though mandibles in these individuals did not attain the full sizes of wild type males. We suggest that moderate JH sensitivity of mandibular cells may be the default developmental state for both sexes, with sex-specific Dsx protein decreasing sensitivity in females, and increasing it in males. This study is the first to demonstrate a causal link between the sex determination and JH signaling pathways, which clearly interact to determine the developmental fates and final sizes of nutrition-dependent secondary-sexual characters. PMID:24453990

A Novel Objective Method of Estimating the Age of Mandibles from African Elephants (Loxodonta africana Africana)

PubMed Central

Stansfield, Fiona J.

2015-01-01

The importance of assigning an accurate estimate of age and sex to elephant carcasses found in the wild has increased in recent years with the escalation in levels of poaching throughout Africa. Irregularities identified in current ageing techniques prompted the development of a new method to describe molar progression throughout life. Elephant mandibles (n = 323) were studied and a point near the distal dental alveolus was identified as being most useful in ranking each jaw according to molar progression. These ‘Age Reference Lines’ were then associated with an age scale based on previous studies and Zimbabwean mandibles of known age. The new ranking produced a single age scale that proved useful for both male and female mandibles up to the maximum lifespan age of 70–75 years. Methods to aid in molar identification and the sexing of found jaws were also identified. PMID:25970428

Enamel-like apatite crown covering amorphous mineral in a crayfish mandible

PubMed Central

Bentov, Shmuel; Zaslansky, Paul; Al-Sawalmih, Ali; Masic, Admir; Fratzl, Peter; Sagi, Amir; Berman, Amir; Aichmayer, Barbara

2012-01-01

Carbonated hydroxyapatite is the mineral found in vertebrate bones and teeth, whereas invertebrates utilize calcium carbonate in their mineralized organs. In particular, stable amorphous calcium carbonate is found in many crustaceans. Here we report on an unusual, crystalline enamel-like apatite layer found in the mandibles of the arthropod Cherax quadricarinatus (freshwater crayfish). Despite their very different thermodynamic stabilities, amorphous calcium carbonate, amorphous calcium phosphate, calcite and fluorapatite coexist in well-defined functional layers in close proximity within the mandible. The softer amorphous minerals are found primarily in the bulk of the mandible whereas apatite, the harder and less soluble mineral, forms a wear-resistant, enamel-like coating of the molar tooth. Our findings suggest a unique case of convergent evolution, where similar functional challenges of mastication led to independent developments of structurally and mechanically similar, apatite-based layers in the teeth of genetically remote phyla: vertebrates and crustaceans. PMID:22588301

Treatment of a large radicular cyst-enucleation or decompression?

PubMed

Matijević, Stevo; Jovivić, Bojan; Bubalo, Marija; Dukić, Smiljka; Cutović, Tatjana

2015-04-01

Radicular cysts treatment involves surgical approach, more or less aggressive. However, treatment of large cystic lesions, including radicular cysts, causes some of dilemmas concerning the choice of the surgical method, especially the degree of radicalism. We presented a 65-year-old male patient with large radicular cyst in the mandible. A large elliptical multilocular radiolucency, located in the left side of the mandible, being in close vicinity to the mandibular canal, was registered at the orthopantomographic radiography. There was a risk of pathological fracture of the mandible. However, the cyst was completely removed by enucleation without intraoperative and postoperative complications. The presented case support the opinion that careful enucleation of large mandibular cysts may be done without complications, such as damages of surrounding anatomical structures or mandibular fracture. The authors indicate reasons for strong support of the undertaken surgical approach of treating large radicular cysts in the mandible.

Morphological Integration of the Modern Human Mandible during Ontogeny

PubMed Central

Polanski, Joshua M.

2011-01-01

Craniofacial integration is prevalent in anatomical modernity research. Little investigation has been done on mandibular integration. Integration patterns were quantified in a longitudinal modern human sample of mandibles. This integration pattern is one of modularization between the alveolar and muscle attachment regions, but with age-specific differences. The ascending ramus and nonalveolar portions of the corpus remain integrated throughout ontogeny. The alveolar region is dynamic, becoming modularized according to the needs of the mandible at a particular developmental stage. Early in ontogeny, this modularity reflects the need for space for the developing dentition; later, modularity is more reflective of mastication. The overall pattern of modern human mandibular integration follows the integration pattern seen in other mammals, including chimpanzees. Given the differences in craniofacial integration patterns between humans and chimpanzees, but the similarities in mandibular integration, it is likely that the mandible has played the more passive role in hominin skull evolution. PMID:21716741

A Complex Facial Trauma Case with Multiple Mandibular Fractures and Dentoalveolar Injuries

PubMed Central

Zorlu, Sevgi; Cankaya, Abdulkadir Burak; Aktoren, Oya; Gencay, Koray

2015-01-01

The principles of management of mandibular fractures differ in children when compared to adults and depend on the specific age-related status of the growing mandible and the developing dentition. This paper presents a case report with a complex facial trauma affecting the mandibular body and condyle region and dentoalveolar complex. Clinical examination revealed soft tissue injuries, limited mouth opening, lateral deviation of the mandible, an avulsed incisor, a subluxated incisor, and a fractured crown. CBCT examination revealed a nondisplaced fracture and an oblique greenstick fracture of the mandibular body and unilateral fracture of the condyle. Closed reduction technique was chosen to manage fractures of the mandible. Favorable healing outcomes on multiple fractures of the mandible throughout the 6-year follow-up period proved the success of the conservative treatment. This case report is important since it presents a variety of pathological sequelae to trauma within one case. PMID:26339511

Primary Intraosseous Adenoid Cystic Carcinoma of the Mandible: A Comprehensive Review With Analysis of 2 Additional Cases.

PubMed

Hu, Hong Ying; Liu, Yuan Yuan; Wang, Hu; Jiang, Meng

2017-08-01

Primary intraosseous adenoid cystic carcinoma (IACC) of the mandible is poorly understood because of its rarity. This study performed a comprehensive literature review on IACC of the mandible. Forty-five cases of IACC reported in the literature and 2 additional cases in the authors' hospital were reviewed. IACC of the mandible generally occurred in the fourth to sixth decades, with no meaningful gender predilection. Pain and swelling were the most common clinical manifestations. Radical surgery combined with postsurgical radiotherapy was recommended as the best treatment. The diagnosis of IACC should be based on clinical, radiologic, and pathologic examinations. Radical surgery combined with postsurgical radiotherapy seems to be the best treatment. In addition, the histologic subtype of the tumor is an important prognostic factor in patients with IACC. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

[3-D finite element modeling of internal fixation of mandibular mental fracture and the design of boundary constraints].

PubMed

Luo, Xiaohui; Wang, Hang; Fan, Yubo

2007-04-01

This study was aimed to develop a 3-D finite element (3-D FE) model of the mental fractured mandible and design the boundary constrains. The CT images from a health volunteer were used as the original information and put into ANSYS program to build a 3-D FE model. The model of the miniplate and screw which were used for the internal fixation was established by Pro/E. The boundary constrains of different muscle loadings were used to simulate the 3 functional conditions of the mandible. A 3-D FE model of mental fractured mandible under the miniplate-screw internal fixation system was constructed. And by the boundary constraints, the 3 biting conditions were simulated and the model could serve as a foundation on which to analyze the biomechanical behavior of the fractured mandible.

Bilateral fractures of the coronoid processes: differential diagnosis of intra-oral gunshot trauma and scavenging using a sheep crania model.

PubMed

Puskas, Cathy M

2003-11-01

Approximately half of the skeleton of an adult male (minus the cranium) was found in a forested part of Greater Vancouver, Canada, in August 2000 by the Royal Canadian Mounted Police (RCMP). Authorities ruled the death as suicide. The only compelling signs of perimortem trauma were symmetrically fractured coronoid processes of the mandible, which can be attributed to a gunshot in the mouth. However, the remains had also been scavenged by canids, raising a problem in differential diagnosis. Could canid scavenging produce bilateral fracturing of the mandible indistinguishable from gunshot wounds to the mouth? We found that canid scavengers could not mimic the type of damage to the mandible caused by intra-oral gunshot wounding using a sheep model (n = 20). Bilateral fracturing of the coronoid processes was found to be characteristic of intra-oral gunshot wounding, while canid scavengers typically ignore this region of the mandible.

Sexual dimorphism of the mandible in a contemporary Chinese Han population.

PubMed

Dong, Hongmei; Deng, Mohong; Wang, WenPeng; Zhang, Ji; Mu, Jiao; Zhu, Guanghui

2015-10-01

A present limitation of forensic anthropology practice in China is the lack of population-specific criteria on contemporary human skeletons. In this study, a sample of 203 maxillofacial Cone beam computed tomography (CBCT) images, including 96 male and 107 female cases (20-65 years old), was analyzed to explore mandible sexual dimorphism in a population of contemporary adult Han Chinese to investigate the potential use of the mandible as sex indicator. A three-dimensional image from mandible CBCT scans was reconstructed using the SimPlant Pro 11.40 software. Nine linear and two angular parameters were measured. Discriminant function analysis (DFA) and logistic regression analysis (LRA) were used to develop the mathematics models for sex determination. All of the linear measurements studied and one angular measurement were found to be sexually dimorphic, with the maximum mandibular length and bi-condylar breadth being the most dimorphic by univariate DFA and LRA respectively. The cross-validated sex allocation accuracies on multivariate were ranged from 84.2% (direct DFA), 83.5% (direct LRA), 83.3% (stepwise DFA) to 80.5% (stepwise LRA). In general, multivariate DFA yielded a higher accuracy and LRA obtained a lower sex bias, and therefore both DFA and LRA had their own advantages for sex determination by the mandible in this sample. These results suggest that the mandible expresses sexual dimorphism in the contemporary adult Han Chinese population, indicating an excellent sexual discriminatory ability. Cone beam computed tomography scanning can be used as alternative source for contemporary osteometric techniques. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Structure and Function in the Lunge Feeding Apparatus: Mechanical Properties of the Fin Whale Mandible.

PubMed

Shadwick, Robert E; Goldbogen, Jeremy A; Pyenson, Nicholas D; Whale, James C A

2017-11-01

The mandibles of rorqual whales are highly modified to support loads associated with lunge-feeding, a dynamic filter feeding mechanism that is characterized by rapid changes in gape angle and acceleration. Although these structures are the largest ossified elements in animals and an important part of the rorqual engulfment apparatus, details of internal structure are limited and no direct measurements of mechanical properties exist. Likewise, the forces that are sustained by the mandibles are unknown. Here we report on the structure and mechanical behavior of the mandible of an adult fin whale. A series of transverse sections were cut at locations along the entire length of a 3.6-m left mandible recovered post-mortem from a 16-m fin whale, and CT scanned to make density maps. Cored samples 6-8 mm in diameter were tested in compression to determine the Young's modulus and strength. In addition, wet density, dry density and mineral density were measured. Dense cortical bone occupies only a relatively narrow peripheral layer while much less dense and oil-filled trabecular bone occupies the rest. Mineral density of both types is strongly correlated with dry density and CT Hounsfield units. Compressive strength is strongly correlated with Young's modulus, while strength and stiffness are both correlated with mineral density. It appears that the superficial compact layer is the main load bearing element, and that the mandible is reinforced against dorso-vental flexion that would occur during the peak loads while feeding. Anat Rec, 300:1953-1962, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Anthropometrics of mental foramen in dry dentate and edentulous mandibles in Coastal Andhra population of Andhra Pradesh State.

PubMed

Moogala, Srinivas; Sanivarapu, Sahitya; Boyapati, Ramanarayana; Devulapalli, Narasimha Swamy; Chakrapani, Swarna; Kolaparthy, Laxmikanth

2014-07-01

The aim of this study is to determine the morphological features and morphometrics of mental foramen with reference to surrounding anatomical landmarks in Coastal Andhra population of Andhra Pradesh State. Two-hundred and nineteen dry dentate and edentulous mandibles are examined in this study. Out of these 127 were dentate and 92 were edentulous. Various morphological and morphometrical parameters were measured by using digital Vernier caliper, metallic wire and metallic scale on both the right and left sides. In the present study, the distance between most anterior margin of mental foramen and posterior border of ramus of the mandible is [MF-PR], MF-PR is 69.61 ± 6.03 mm on the right side and is 69.17 ± 6. 0 mm on left side in dentate mandible. In edentulous type, MF-PR is 68.39 ±6.4 mm on right side and 68.81 ± 6.55 mm on left side. In the present study, the distance between symphysis menti and most anterior margin of mental foramen [MF-SM] in dentate mandible is 28.24 ± 5.09 mm on right side and is 27.45 ± 3.7 mm on left side. In edentulous mandible (MF-SM) is 28.51 ± 4.5 mm on right side and on left side is 27.99 ± 4.50 mm. Acquiring the knowledge and importance of anatomy of mental foramen is helpful in avoiding neurovascular complications, during regional anesthesia, peri apical surgeries, nerve repositioning and dental implant placement.

215 mandible fractures in 120 children: demographics, treatment, outcomes, and early growth data.

PubMed

Smith, Darren M; Bykowski, Michael R; Cray, James J; Naran, Sanjay; Rottgers, S Alex; Shakir, Sameer; Vecchione, Lisa; Schuster, Lindsay; Losee, Joseph E

2013-06-01

Optimal management of pediatric mandible fractures demands that the practitioner balance reduction and fixation with preservation of growth potential and function. The ideal synthesis of these goals has not yet been defined. The authors catalogue their experience with pediatric mandible fractures at a major pediatric teaching hospital with reference to demographics, injury type, treatment, and outcomes to inform future management of these injuries. Demographics, management, and outcomes of pediatric mandible fractures presenting over 10 years at a pediatric trauma center were assessed. Cephalometric analysis was conducted. Relationships among demographics, fracture type, management, outcomes, and growth were explored. Two hundred fifteen mandible fractures in 120 patients younger than 18 years were analyzed (average follow-up, 19.5 months). The condylar head and neck were fractured most frequently. Operative management was significantly more likely for children older than 12 years (p<0.05). Operative management and multiple fractures were significantly associated with a higher rate of adverse outcomes (p<0.05), but no adverse outcomes were considered to significantly affect mandibular function by patient or surgeon. No significant growth differences existed on cephalometric analysis between our cohort and age- and sex-matched controls (p>0.05). This study reports the demographics, treatment, and early follow-up of a sizable cohort of pediatric mandible fractures. Management principles for these injuries are outlined. Although definitive recommendations must be withheld until longer follow-up is available, the data presented here show that the treatment protocols used at the authors' center have yielded largely uncompromised mandibular function and growth thus far.

Fast and Powerful: Biomechanics and Bite Forces of the Mandibles in the American Cockroach Periplaneta americana

PubMed Central

Weihmann, Tom; Reinhardt, Lars; Weißing, Kevin; Siebert, Tobias; Wipfler, Benjamin

2015-01-01

Knowing the functionality and capabilities of masticatory apparatuses is essential for the ecological classification of jawed organisms. Nevertheless insects, especially with their outstanding high species number providing an overwhelming morphological diversity, are notoriously underexplored with respect to maximum bite forces and their dependency on the mandible opening angles. Aiming for a general understanding of insect biting, we examined the generalist feeding cockroach Periplaneta americana, characterized by its primitive chewing mouth parts. We measured active isometric bite forces and passive forces caused by joint resistance over the entire mandibular range with a custom-built 2D force transducer. The opening angle of the mandibles was quantified by using a video system. With respect to the effective mechanical advantage of the mandibles and the cross-section areas, we calculated the forces exerted by the mandible closer muscles and the corresponding muscle stress values. Comparisons with the scarce data available revealed close similarities of the cockroaches’ mandible closer stress values (58 N/cm2) to that of smaller specialist carnivorous ground beetles, but strikingly higher values than in larger stag beetles. In contrast to available datasets our results imply the activity of faster and slower muscle fibres, with the latter becoming active only when the animals chew on tough material which requires repetitive, hard biting. Under such circumstances the coactivity of fast and slow fibres provides a force boost which is not available during short-term activities, since long latencies prevent a specific effective employment of the slow fibres in this case. PMID:26559671

Different Surgical Approaches for Multiple Fractured Atrophic Mandibles

PubMed Central

Pereira, Felipe Ladeira; Gealh, Walter Cristiano; Barbosa, Carlos Eduardo Braga; Filho, Liogi Iwaki

2011-01-01

Atrophic edentulous mandible fractures in geriatric patients have low incidence but present several biological and biomechanical peculiarities that produce a nonunion rate of around 20%. Surgical extraoral approaches for internal fixation of these fractures can be transcervical or by one or two submandibular incisions. Two patients sustaining multiple fractures in atrophic edentulous mandible are presented: the first patient was 72-years-old, treated by two submandibular incisions, and the second was 81-years-old, treated by transcervical approach. We discuss the advantages and drawbacks of each approach and their indications according to the Luhr et al (1996) atrophy index. PMID:22379503

Coexistent Superscan and Lincoln Sign on Bone Scintigraphy.

PubMed

Kulkarni, Mukta; Soni, Atul; Shetkar, Shubhangi; Amer, Momin; Mulavekar, Amruta; Joshi, Prathamesh

2017-08-01

A 70-year-old man underwent Tc-methylene diphosphonate scintigraphy for staging of adenocarcinoma prostate. Scintigraphy revealed diffuse increased tracer uptake in skeletal system along with faint renal visualization, a pattern compatible with metastatic superscan. The scintigraphy also revealed increased radiotracer uptake in the body of the mandible-Lincoln sign or black beard sign. Radiological imaging revealed sclerotic lesions throughout the skeleton including the mandible, confirming widespread skeletal metastases. Lincoln sign is previously described in monostotic Paget disease of the mandible and in contiguous spread of oral malignancy. We describe this pattern in distant metastatic involvement from carcinoma prostate with coexistent superscan pattern.

[A new method of fabricating photoelastic model by rapid prototyping].

PubMed

Fan, Li; Huang, Qing-feng; Zhang, Fu-qiang; Xia, Yin-pei

2011-10-01

To explore a novel method of fabricating the photoelastic model using rapid prototyping technique. A mandible model was made by rapid prototyping with computerized three-dimensional reconstruction, then the photoelastic model with teeth was fabricated by traditional impression duplicating and mould casting. The photoelastic model of mandible with teeth, which was fabricated indirectly by rapid prototyping, was very similar to the prototype in geometry and physical parameters. The model was of high optical sensibility and met the experimental requirements. Photoelastic model of mandible with teeth indirectly fabricated by rapid prototyping meets the photoelastic experimental requirements well.

Relationship between the cranial base and the mandible in artificially deformed skulls.

PubMed

Ferros, I; Mora, M J; Obeso, I F; Jimenez, P; Martinez-Insua, A

2016-11-01

There is controversy regarding the relationship between mandibular position and alterations of the cranial base that provoke a more anterior location of the glenoid fossa. Artificially deformed skulls display marked alterations of the cranial base. This study evaluates mandibular changes as function of the morphology of the cranial base in these skulls. A geometric morphometric study was performed on lateral cephalometric X-rays of three groups of skulls: 32 with anteroposterior deformity, 17 with circumferential deformity and 39 with no apparent deformity. In artificially deformed skulls, the cranial base was deformed causing the mandibular condyle to be in a more anterior position. There was a complete remodelling of the mandible involving narrowing and elongation of the mandibular ramus, rotation of the corpus of the mandible and increased vertical height of the symphysis. Forward displacement did not occur. Integration between mandible and cranial base is not altered by deformation of the skull. Deformity of the cranial vault exerts an influence on the mandible, supporting the theory of modular units in complete integration. This also supports the theory that mandibular prognathism is a multifactorial result and not a direct effect of displacement of the cranial base. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Strong selection on mandible and nest features in a carpenter bee that nests in two sympatric host plants

PubMed Central

Flores-Prado, Luis; Pinto, Carlos F; Rojas, Alejandra; Fontúrbel, Francisco E

2014-01-01

Host plants are used by herbivorous insects as feeding or nesting resources. In wood-boring insects, host plants features may impose selective forces leading to phenotypic differentiation on traits related to nest construction. Carpenter bees build their nests in dead stems or dry twigs of shrubs and trees; thus, mandibles are essential for the nesting process, and the nest is required for egg laying and offspring survival. We explored the shape and intensity of natural selection on phenotypic variation on three size measures of the bees (intertegular width, wing length, and mandible area) and two nest architecture measures (tunnel length and diameter) on bees using the native species Chusquea quila (Poaceae), and the alloctonous species Rubus ulmifolius (Rosaceae), in central Chile. Our results showed significant and positive linear selection gradients for tunnel length on both hosts, indicating that bees building long nests have more offspring. Bees with broader mandibles show greater fitness on C. quila but not on R. ulmifolius. Considering that C. quila represents a selective force on mandible area, we hypothesized a high adaptive value of this trait, resulting in higher fitness values when nesting on this host, despite its wood is denser and hence more difficult to be bored. PMID:24963379

Strong selection on mandible and nest features in a carpenter bee that nests in two sympatric host plants.

PubMed

Flores-Prado, Luis; Pinto, Carlos F; Rojas, Alejandra; Fontúrbel, Francisco E

2014-05-01

Host plants are used by herbivorous insects as feeding or nesting resources. In wood-boring insects, host plants features may impose selective forces leading to phenotypic differentiation on traits related to nest construction. Carpenter bees build their nests in dead stems or dry twigs of shrubs and trees; thus, mandibles are essential for the nesting process, and the nest is required for egg laying and offspring survival. We explored the shape and intensity of natural selection on phenotypic variation on three size measures of the bees (intertegular width, wing length, and mandible area) and two nest architecture measures (tunnel length and diameter) on bees using the native species Chusquea quila (Poaceae), and the alloctonous species Rubus ulmifolius (Rosaceae), in central Chile. Our results showed significant and positive linear selection gradients for tunnel length on both hosts, indicating that bees building long nests have more offspring. Bees with broader mandibles show greater fitness on C. quila but not on R. ulmifolius. Considering that C. quila represents a selective force on mandible area, we hypothesized a high adaptive value of this trait, resulting in higher fitness values when nesting on this host, despite its wood is denser and hence more difficult to be bored.

Reverse engineering of mandible and prosthetic framework: Effect of titanium implants in conjunction with titanium milled full arch bridge prostheses on the biomechanics of the mandible.

PubMed

De Santis, Roberto; Gloria, Antonio; Russo, Teresa; D'Amora, Ugo; Varriale, Angelo; Veltri, Mario; Balleri, Piero; Mollica, Francesco; Riccitiello, Francesco; Ambrosio, Luigi

2014-12-18

This study aimed at investigating the effects of titanium implants and different configurations of full-arch prostheses on the biomechanics of edentulous mandibles. Reverse engineered, composite, anisotropic, edentulous mandibles made of a poly(methylmethacrylate) core and a glass fibre reinforced outer shell were rapid prototyped and instrumented with strain gauges. Brånemark implants RP platforms in conjunction with titanium Procera one-piece or two-piece bridges were used to simulate oral rehabilitations. A lateral load through the gonion regions was used to test the biomechanical effects of the rehabilitations. In addition, strains due to misfit of the one-piece titanium bridge were compared to those produced by one-piece cast gold bridges. Milled titanium bridges had a better fit than cast gold bridges. The stress distribution in mandibular bone rehabilitated with a one-piece bridge was more perturbed than that observed with a two-piece bridge. In particular the former induced a stress concentration and stress shielding in the molar and symphysis regions, while for the latter design these stresses were strongly reduced. In conclusion, prosthetic frameworks changed the biomechanics of the mandible as a result of both their design and manufacturing technology. Copyright © 2014 Elsevier Ltd. All rights reserved.

Mesodermal Tbx1 is required for patterning the proximal mandible in mice

PubMed Central

Aggarwal, Vimla S.; Carpenter, Courtney; Freyer, Laina; Liao, Jun; Petti, Marilena; Morrow, Bernice E.

2010-01-01

Defects in the lower jaw, or mandible, occur commonly either as isolated malformations or in association with genetic syndromes. Understanding its formation and genetic pathways required for shaping its structure in mammalian model organisms will shed light into the pathogenesis of malformations in humans. The lower jaw is derived from the mandibular process of the first pharyngeal arch (MdPA1) during embryogenesis. Integral to the development of the mandible, is the signaling interplay between Fgf8 and Bmp4 in the rostral ectoderm and their downstream effector genes in the underlying neural crest derived mesenchyme. The non-neural crest MdPA1 core mesoderm is needed to form muscles of mastication, but its role in patterning the mandible is unknown. Here, we show that mesoderm specific deletion of Tbx1, a T- box transcription factor and gene for velo-cardio-facial/DiGeorge syndrome, results in defects in formation of the proximal mandible by shifting expression of Fgf8, Bmp4 and their downstream effector genes in mouse embryos at E10.5. This occurs without significant changes in cell proliferation or apoptosis at the same stage. Our results elucidate a new function for the non-neural crest core mesoderm and specifically, mesodermal Tbx1, in shaping the lower jaw. PMID:20501333

Additive manufacturing for microvascular reconstruction of the mandible in 20 patients.

PubMed

Lethaus, Bernd; Poort, Lucas; Böckmann, Roland; Smeets, Ralf; Tolba, Rene; Kessler, Peter

2012-01-01

The aim of this study was to evaluate the use of model mandibles made preoperatively by additive manufacturing, which were used to prebend reconstruction plates prior to mandibular resection and reconstruction with microvascular bony flaps. Computer Tomography (CT) or Cone Beam Tomography (CBT) scans acquired preoperatively were used to obtain DICOM data sets to produce a model of the mandible using rapid prototyping. This model was used as a template to prebend and then sterilize a 2.3 or 2.7 reconstruction plate, which was used to reconstruct the mandible with a microvascular bony flap. This technique was used in 20 consecutive patients who required mandibular resection and reconstruction because of a tumour or osteoradionecrosis. The prebent plate was used in all patients intraoperatively without the need for any further bending. The average time to bend a plate on a nonsterile model was 0.42 h (range 0.25-0.68 h). This is felt to represent the minimum amount of time saved during the operation. Additive manufacture of the mandible prior to resection and reconstruction with a microvascular flap is a useful technique which reduces the operating time. Copyright © 2011 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Effect of piezopuncture on tooth movement and bone remodeling in dogs.

PubMed

Kim, Young-Seok; Kim, Su-Jung; Yoon, Hyun-Joo; Lee, Peter Joohak; Moon, Won; Park, Young-Guk

2013-07-01

The aim of the study was to elucidate whether a newly developed, minimally invasive procedure, piezopuncture, would be a logical modification for accelerating tooth movement in the maxilla and the mandible. Ten beagle dogs were divided into 2 groups. Traditional orthodontic tooth movement was performed in the control group. In the experimental group, a piezotome was used to make cortical punctures penetrating the gingiva around the moving tooth. Measurements were made in weeks 1 through 6. Tooth movement and bone apposition rates from the histomorphometric analyses were evaluated by independent t tests. The cumulative tooth movement distance was greater in the piezopuncture group than in the control group: 3.26-fold in the maxilla and 2.45-fold in the mandible. Piezopuncture significantly accelerated the tooth movements at all observation times, and the acceleration was greatest during the first 2 weeks for the maxilla and the second week for the mandible. Anabolic activity was also increased by piezopuncture: 2.55-fold in the maxilla and 2.35-fold in the mandible. Based on the different effects of piezopuncture on the maxilla and the mandible, the results of a clinical trial of piezopuncture with optimized protocols might give orthodontists a therapeutic benefit for reducing treatment duration. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Treatment of Brodie's Syndrome using parasymphyseal distraction through virtual surgical planning and RP assisted customized surgical osteotomy guide-A mock surgery report

NASA Astrophysics Data System (ADS)

Dahake, Sandeep; Kuthe, Abhaykumar; Mawale, Mahesh

2017-10-01

This paper aims to describe virtual surgical planning (VSP), computer aided design (CAD) and rapid prototyping (RP) systems for the preoperative planning of accurate treatment of the Brodie's Syndrome. 3D models of the patient's maxilla and mandible were separately generated based on computed tomography (CT) image data and fabricated using RP. During the customized surgical osteotmy guide (CSOG) design process, the correct position was identified and the geometry of the CSOG was generated based on affected mandible of the patient and fabricated by a RP technique. Surgical approach such as preoperative planning and simulation of surgical procedures was performed using advanced software. The VSP and RP assisted CSOG was used to avoid the damage of the adjacent teeth and neighboring healthy tissues. Finally the mock surgery was performed on the biomodel (i.e. diseased RP model) of mandible with reference to the normal maxilla using osteotomy bur with the help of CSOG. Using this CSOG the exact osteotomy of the mandible and the accurate placement of the distractor were obtained. It ultimately improved the accuracy of the surgery in context of the osteotomy and distraction. The time required in cutting the mandible and placement of the distractor was found comparatively less than the regular free hand surgery.

Morphometric study on mandibular foramen and incidence of accessory mandibular foramen in mandibles of south Indian population and its clinical implications in inferior alveolar nerve block.

PubMed

Shalini, R; RaviVarman, C; Manoranjitham, R; Veeramuthu, M

2016-12-01

The mandibular foramen is a landmark for procedures like inferior alveolar nerve block, mandibular implant treatment, and mandibular osteotomies. The present study was aimed to identify the precise location of the mandibular foramen and the incidence of accessory mandibular foramen in dry adult mandibles of South Indian population. The distance of mandibular foramen from the anterior border of the ramus, posterior border of the ramus, mandibular notch, base of the mandible, third molar, and apex of retromolar trigone was measured with a vernier caliper in 204 mandibles. The mean distance of mandibular foramen from the anterior border of ramus of mandible was 17.11±2.74 mm on the right side and 17.41±3.05 mm on the left side, from posterior border was 10.47±2.11 mm on the right side and 9.68±2.03 mm on the left side, from mandibular notch was 21.74±2.74 mm on the right side and 21.92±3.33 mm on the left side, from the base of the ramus was 22.33±3.32 mm on the right side and 25.35±4.5 mm on the left side, from the third molar tooth was 22.84±3.94 mm on the right side and 23.23±4.21 mm on the left side, from the apex of retromolar trigone was 12.27±12.13 mm on the right side and 12.13±2.35 mm on the left side. Accessory mandibular foramen was present in 32.36% of mandibles. Knowledge of location mandibular foramen is useful to the maxillofacial surgeons, oncologists and radiologists.

Morphometric study on mandibular foramen and incidence of accessory mandibular foramen in mandibles of south Indian population and its clinical implications in inferior alveolar nerve block

PubMed Central

RaviVarman, C.; Manoranjitham, R.; Veeramuthu, M.

2016-01-01

The mandibular foramen is a landmark for procedures like inferior alveolar nerve block, mandibular implant treatment, and mandibular osteotomies. The present study was aimed to identify the precise location of the mandibular foramen and the incidence of accessory mandibular foramen in dry adult mandibles of South Indian population. The distance of mandibular foramen from the anterior border of the ramus, posterior border of the ramus, mandibular notch, base of the mandible, third molar, and apex of retromolar trigone was measured with a vernier caliper in 204 mandibles. The mean distance of mandibular foramen from the anterior border of ramus of mandible was 17.11±2.74 mm on the right side and 17.41±3.05 mm on the left side, from posterior border was 10.47±2.11 mm on the right side and 9.68±2.03 mm on the left side, from mandibular notch was 21.74±2.74 mm on the right side and 21.92±3.33 mm on the left side, from the base of the ramus was 22.33±3.32 mm on the right side and 25.35±4.5 mm on the left side, from the third molar tooth was 22.84±3.94 mm on the right side and 23.23±4.21 mm on the left side, from the apex of retromolar trigone was 12.27±12.13 mm on the right side and 12.13±2.35 mm on the left side. Accessory mandibular foramen was present in 32.36% of mandibles. Knowledge of location mandibular foramen is useful to the maxillofacial surgeons, oncologists and radiologists. PMID:28127498

Is there enough evidence so that mandible can be used as a tool for sex dimorphism? A systematic review.

PubMed

Hazari, Puja; Hazari, Rakesh S; Mishra, Sunil Kumar; Agrawal, Surendra; Yadav, Mukesh

2016-01-01

One of the most challenging tasks for forensic science is to identify the unknown human skeletal remains of deceased individuals. Study of sex by distinguishing the various morphological characteristics of bones is utmost important in forensic anthropology and for medico-legal assessment. The purpose of this article is to review the literature, to find if there is sufficient evidence to establish the use of mandible in sex identification. An electronic search was performed to identify suitable literature, using database of MEDLINE, PubMed, and EBSCOhost. Published articles in between January 2000 and April 2015 were searched. The main focus of search was on the various parameters of mandible studied in last 15 years for sex dimorphism. The focus was on the articles published on radiographic studies as well as on morphometric studies of dry mandible in which skeletal parameters were studied. The screening of titles and abstracts were done, suitable literature that fulfilled the inclusion criteria was selected for a full-text reading. The initial literature search resulted in 89 articles, out of which only 36 articles fulfilled the inclusion criteria and were included in this systematic review. Out of 16 radiographic studies, 14 showed statistically significant results that the adult mandible could be used with increased sensitivity and objectivity to identify both sex and population affinity compared to other standard analytical techniques, whereas two studies showed insignificant results. Out of 20 morphometric studies of dry mandible 15 studies showed a positive correlation between sex dimorphism and mandibular parameters and five studies did not show any positive correlations between the two.

Standardized Protocol for Virtual Surgical Plan and 3-Dimensional Surgical Template-Assisted Single-Stage Mandible Contour Surgery.

PubMed

Fu, Xi; Qiao, Jia; Girod, Sabine; Niu, Feng; Liu, Jian Feng; Lee, Gordon K; Gui, Lai

2017-09-01

Mandible contour surgery, including reduction gonioplasty and genioplasty, has become increasingly popular in East Asia. However, it is technically challenging and, hence, leads to a long learning curve and high complication rates and often needs secondary revisions. The increasing use of 3-dimensional (3D) technology makes accurate single-stage mandible contour surgery with minimum complication rates possible with a virtual surgical plan (VSP) and 3-D surgical templates. This study is to establish a standardized protocol for VSP and 3-D surgical templates-assisted mandible contour surgery and evaluate the accuracy of the protocol. In this study, we enrolled 20 patients for mandible contour surgery. Our protocol is to perform VSP based on 3-D computed tomography data. Then, design and 3-D print surgical templates based on preoperative VSP. The accuracy of the method was analyzed by 3-D comparison of VSP and postoperative results using detailed computer analysis. All patients had symmetric, natural osteotomy lines and satisfactory facial ratios in a single-stage operation. The average relative error of VSP and postoperative result on the entire skull was 0.41 ± 0.13 mm. The average new left gonial error was 0.43 ± 0.77 mm. The average new right gonial error was 0.45 ± 0.69 mm. The average pognion error was 0.79 ± 1.21 mm. Patients were very satisfied with the aesthetic results. Surgeons were very satisfied with the performance of surgical templates to facilitate the operation. Our standardized protocol of VSP and 3-D printed surgical templates-assisted single-stage mandible contour surgery results in accurate, safe, and predictable outcome in a single stage.

Sex determination from the mandibular ramus flexure of Koreans by discrimination function analysis using three-dimensional mandible models.

PubMed

Lin, Chenghe; Jiao, Benzheng; Liu, Shanshan; Guan, Feng; Chung, Nak-Eun; Han, Seung-Ho; Lee, U-Young

2014-03-01

It has been known that mandible ramus flexure is an important morphologic trait for sex determination. However, it will be unavailable when mandible is incomplete or fragmented. Therefore, the anthropometric analysis on incomplete or fragmented mandible becomes more important. The aim of this study is to investigate the sex-discriminant potential of mandible ramus flexure on the Korean three-dimensional (3D) mandible models with anthropometric analysis. The sample consists of 240 three dimensional mandibular models obtained from Korean population (M:F; 120:120, mean age 46.2 y), collected by The Catholic Institute for Applied Anatomy, The Catholic University of Korea. Anthropometric information about 11 metric was taken with Mimics, anthropometry libraries toolkit. These parameters were subjected to different discriminant function analyses using SPSS 17.0. Univariate analyses showed that the resubstitution accuracies for sex determination range from 50.4 to 77.1%. Mandibular flexure upper border (MFUB), maximum ramus vertical height (MRVH), and upper ramus vertical height (URVH) expressed the greatest dimorphism, 72.1 to 77.1%. Bivariate analyses indicated that the combination of MFUB and MRVH hold even higher resubstitution accuracy of 81.7%. Furthermore, the direct and stepwise discriminant analyses with the variables on the upper ramus above flexure could predict sex in 83.3 and 85.0%, respectively. When all variables of mandibular ramus flexure were input in stepwise discriminant analysis, the resubstitution accuracy arrived as high as 88.8%. Therefore, we concluded that the upper ramus above flexure hold the larger potentials than the mandibular ramus flexure itself to predict sexes, and that the equations in bivariate and multivariate analysis from our study will be helpful for sex determination on Korean population in forensic science and law. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Submandibular approach to the C2-3 disc level: microsurgical anatomy with clinical application.

PubMed

Russo, Antonino; Albanese, Erminia; Quiroga, Monica; Ulm, Arthur J

2009-04-01

Approaching the C2-3 disc level is challenging because of its location behind the mandible and the vital neurovascular structures overlying the area. The purpose of this study was to illustrate in a stepwise fashion the microsurgical anatomy of the submandibular approach to the C2-3 disc. Ten adult formalin-fixed cadaveric specimens (20 sides) were studied. Particular attention was paid to the structures limiting the exposure. The authors measured the distance between the inferior border of the mandible and the marginal mandibular branch of the facial nerve running inferior to the mandible, the distance between the horizontal segment of the hypoglossal nerve and the hyoid bone, and the distance between the horizontal segment of the hypoglossal nerve and the mandible. They compared the location of the superior laryngeal nerve with regard to the submandibular and the standard Smith-Robinson approaches. A clinical case illustrating the usefulness of the surgical technique in this region is presented. The mean distance between the inferior border of the mandible and the lowest point of the marginal mandibular branch of the facial nerve was 6.7 +/- 1.69 mm. The hypoglossal nerve's mean distance above the hyoid bone was 8.4 +/- 1.78 mm and below the mandible was 19.6 +/- 6.39 mm. The internal branch of the superior laryngeal nerve, with respect to the cervical spine, always entered the thyrohyoid membrane just inferior to the C-3 vertebral body. The superior laryngeal nerve was found to be an impediment to approaching the C2-3 disc through the standard Smith-Robinson approach. The submandibular approach provides excellent exposure, with a perpendicular view of the C2-3 disc level. This approach is one of the options to be considered when dealing with high cervical pathologies.

Implant-based three-dimensional superimposition of the growing mandible in a rabbit model.

PubMed

Parton, Andrew L; Duncan, Warwick J; Oliveira, Marcelo E; Key, Oscar; Farella, Mauro

2016-10-01

The reliable assessment of craniofacial morphological changes during growth requires invariant regions for image registration. As these regions have not yet been identified in three dimensions, intra-osseous implants are required as fiducial markers for the reliable assessment of three-dimensional (3D) mandibular growth changes. The objective of this study was to develop an animal model for the assessment of the 3D morphological changes of the mandible during growth, using implants as fiducial markers. Titanium implants were placed in the body of the mandible of six New Zealand White rabbits. Cone beam computed tomography (CBCT) scans were taken 1-week following implant placement and after an additional 8-weeks of growth. Segmentations of CBCT images were exported into custom-made scripts, implant centroids were identified, implant stability during growth calculated, and the segmented mandibles were registered on the implant centroids. The buccal cortical bone of the body of the mandible was stable during growth and suitable for fiducial marker placement. Bilateral implants resulted in more accurate rigid registration of the growing rabbit mandible than only unilateral implants. 3D mandibular growth changes were visualised by means of semi-transparencies. This animal model appears to be feasible for the assessment of the 3D morphological changes occurring during mandibular growth. To the best of our knowledge this is the first time that the implant superimposition method has been combined with 3D imaging to accurately reveal mandibular growth changes. © The Author 2015. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

A novel 3D template for mandible and maxilla reconstruction: Rapid prototyping using stereolithography

PubMed Central

Kumta, Samir; Kumta, Monica; Jain, Leena; Purohit, Shrirang; Ummul, Rani

2015-01-01

Introduction: Replication of the exact three-dimensional (3D) structure of the maxilla and mandible is now a priority whilst attempting reconstruction of these bones to attain a complete functional and aesthetic rehabilitation. We hereby present the process of rapid prototyping using stereolithography to produce templates for modelling bone grafts and implants for maxilla/mandible reconstructions, its applications in tumour/trauma, and outcomes for primary and secondary reconstruction. Materials and Methods: Stereolithographic template-assisted reconstruction was used on 11 patients for the reconstruction of the mandible/maxilla primarily following tumour excision and secondarily for the realignment of post-traumatic malunited fractures or deformity corrections. Data obtained from the computed tomography (CT) scans with 1-mm resolution were converted into a computer-aided design (CAD) using the CT Digital Imaging and Communications in Medicine (DICOM) data. Once a CAD model was constructed, it was converted into a stereolithographic format and then processed by the rapid prototyping technology to produce the physical anatomical model using a resin. This resin model replicates the native mandible, which can be thus used off table as a guide for modelling the bone grafts. Discussion: This conversion of two-dimensional (2D) data from CT scan into 3D models is a very precise guide to shaping the bone grafts. Further, this CAD can reconstruct the defective half of the mandible using the mirror image principle, and the normal anatomical model can be created to aid secondary reconstructions. Conclusion: This novel approach allows a precise translation of the treatment plan directly to the surgical field. It is also an important teaching tool for implant moulding and fixation, and helps in patient counselling. PMID:26933279

A novel 3D template for mandible and maxilla reconstruction: Rapid prototyping using stereolithography.

PubMed

Kumta, Samir; Kumta, Monica; Jain, Leena; Purohit, Shrirang; Ummul, Rani

2015-01-01

Replication of the exact three-dimensional (3D) structure of the maxilla and mandible is now a priority whilst attempting reconstruction of these bones to attain a complete functional and aesthetic rehabilitation. We hereby present the process of rapid prototyping using stereolithography to produce templates for modelling bone grafts and implants for maxilla/mandible reconstructions, its applications in tumour/trauma, and outcomes for primary and secondary reconstruction. Stereolithographic template-assisted reconstruction was used on 11 patients for the reconstruction of the mandible/maxilla primarily following tumour excision and secondarily for the realignment of post-traumatic malunited fractures or deformity corrections. Data obtained from the computed tomography (CT) scans with 1-mm resolution were converted into a computer-aided design (CAD) using the CT Digital Imaging and Communications in Medicine (DICOM) data. Once a CAD model was constructed, it was converted into a stereolithographic format and then processed by the rapid prototyping technology to produce the physical anatomical model using a resin. This resin model replicates the native mandible, which can be thus used off table as a guide for modelling the bone grafts. This conversion of two-dimensional (2D) data from CT scan into 3D models is a very precise guide to shaping the bone grafts. Further, this CAD can reconstruct the defective half of the mandible using the mirror image principle, and the normal anatomical model can be created to aid secondary reconstructions. This novel approach allows a precise translation of the treatment plan directly to the surgical field. It is also an important teaching tool for implant moulding and fixation, and helps in patient counselling.

Mechanical mandible competence in rats with nutritional growth retardation.

PubMed

Lezón, Christian Esteban; Pintos, Patricia Mabel; Bozzini, Clarisa; Romero, Alan Agüero; Casavalle, Patricia; Friedman, Silvia María; Boyer, Patricia Mónica

2017-08-01

In order to provide a better understanding of the sympathetic nervous system as a negative regulator of bone status, the aim of the study was to establish the biomechanical mandible response to different doses of a β-adrenergic antagonist such as propranolol (P) in a stress-induced food restriction model of growth retardation. Rats were assigned to eight groups: Control (C), C+P3.5 (CP3.5), C+P7 (CP7), C+P14 (CP14), NGR, NGR+P3.5 (NGRP3.5), NGR+P7 (NGRP7) and NGR+P14 (NGRP14). C, CP3.5, CP7 and CP14 rats were freely fed with the standard diet. NGR, NGRP3.5, NGRP7 and NGRP14 rats received, for 4 weeks (W4), 80% of the amount of controls food consumed. Propranolol 3.5, 7 and 14mg/kg/day was injected ip 5days per week in CP3.5 and NGRP3.5, CP7 and NGRP7, CP14 and NGRP14, respectively. At W4, zoometry, mandible morphometry, static histomorphometric and biomechanical competence were performed. A dose of Propranolol 7mg/kg/day induced interradicular bone volume accretion reaching a mandible stiffness according to chronological age. These findings evidenced that sympathetic nervous system activity is a negative regulator of mandible mechanical competence in the nutritional growth retardation model. Propranolol 7mg/kg/day, under the regimen usage, seems to be appropriate to blockade SNS activity on mandible mechanical performance in NGR rats, probably associated to an effect on bone mechanostat system ability to detect disuse mode as an error. Copyright © 2017 Elsevier Ltd. All rights reserved.

Nonextraction and nonsurgical treatment of an adult with skeletal Class II open bite with severe retrognathic mandible and temporomandibular disorders.

PubMed

Kondo, Etsuko

2007-01-01

The treatment of an adult patient with a skeletal Class II Division 1 malocclusion, retrognathic mandible with downward and backward rotation, anterior open bite, and temporomandibular disorders is presented. Treatment objectives included establishing a stable occlusion with normal respiration, eliminating temporomandibular disorder symptoms, and improving facial esthetics through nonextraction and nonsurgical treatment. The patient was a Japanese adult female, who had previously been advised to have orthognathic surgery. An expansion plate was used to reshape the maxillary dentoalveolar arch. Distalization of the maxillary arch and forward movement of the mandible were achieved by reduced excessive posterior occlusal vertical dimension, through uprighting and intruding the mandibular posterior teeth, and rotating the mandible slightly upward and forward. The functional occlusal plane was reconstructed by uprighting and intruding the mandibular posterior teeth with a full-bracket appliance, combined with a maxillary expansion plate and short Class II elastics. Myofunctional therapy and masticatory and cervical muscle training involved chewing gum exercises and neck-muscle massage. The excessive posterior vertical occlusal dimension was significantly reduced, creating a small clearance between the posterior maxilla and mandible. The occlusal interferences in the posterior area were eliminated by the expansion of the maxillary dentoalveolar arch. As a result, the mandible moved forward, creating a more favorable jaw relationship. Distal movement of the maxillary arch was also achieved. The functional occlusal plane was reconstructed and a normal overjet and overbite were created. Adequate tongue space for normal respiration was established during the early stage of treatment. A stable occlusion with adequate posterior support and anterior guidance was established in a treatment time of 25 months, without orthognathic surgery, extraction, or headgear; this result was maintained at more than 1 year 8 months posttreatment.

[A case report of giant cemento-ossifying fibroma].

PubMed

Lu, Run; Liang, Wen-Wu; Yang, Zhan; Liu, Chun-Hai; Zhao, Yue-Tao

2010-12-01

Cemento-ossifying fibroma is a rare benign tumor from periodontium, which usually occurs in mandible body and mandible ramus. It consists of collagen fibrils, fibroblast, and cementoblast. This article reported a case of giant cemento-ossifying fibroma and discussed the clinical features and treatment.

Specification of jaw identity by the Hand2 transcription factor

PubMed Central

Funato, Noriko; Kokubo, Hiroki; Nakamura, Masataka; Yanagisawa, Hiromi; Saga, Yumiko

2016-01-01

Acquisition of the lower jaw (mandible) was evolutionarily important for jawed vertebrates. In humans, syndromic craniofacial malformations often accompany jaw anomalies. The basic helix-loop-helix transcription factor Hand2, which is conserved among jawed vertebrates, is expressed in the neural crest in the mandibular process but not in the maxillary process of the first branchial arch. Here, we provide evidence that Hand2 is sufficient for upper jaw (maxilla)-to-mandible transformation by regulating the expression of homeobox transcription factors in mice. Altered Hand2 expression in the neural crest transformed the maxillae into mandibles with duplicated Meckel’s cartilage, which resulted in an absence of the secondary palate. In Hand2-overexpressing mutants, non-Hox homeobox transcription factors were dysregulated. These results suggest that Hand2 regulates mandibular development through downstream genes of Hand2 and is therefore a major determinant of jaw identity. Hand2 may have influenced the evolutionary acquisition of the mandible and secondary palate. PMID:27329940

[Registration technology for mandibular angle osteotomy based on augmented reality].

PubMed

Zhu, Ming; Chai, Gang; Zhang, Yan; Ma, Xiao-Fei; Yu, Zhe-Yuan; Zhu, Yi-Jia

2010-12-01

To establish an effective path to register the operative plan to the real model of mandible made by rapid prototyping (RP) technology. Computerize tomography (CT) was performed on 20 patients to create 3D images, and computer aided operation planning information can be merged with the 3D images. Then dental cast was used to fix the signal which can be recognized by the software. The dental cast was transformed to 3D data with a laser scanner and a programmer that run on a personal computer named Rapidform matching the dental cast and the mandible image to generate the virtual image. Then the registration was achieved by video monitoring system. By using this technology, the virtual image of mandible and the cutting planes both can overlay the real model of mandible made by RP. This study found an effective way for registration by using dental cast, and this way might be a powerful option for the registration of augmented reality. Supported by Program for Innovation Research Team of Shanghai Municipal Education Commission.

The Watinglo mandible: a second terminal Pleistocene Homo sapiens fossil from tropical Sahul with a test on existing models for the human settlement of the region.

PubMed

Bulbeck, D; O'Connor, S

2011-02-01

This paper analyses a fossil human mandible, dated to circa 10ka, from Watinglo rockshelter on the north coast of Papua New Guinea. The fossil is metrically and morphologically similar to male mandibles of recent Melanesians and Australian Aborigines. It is distinguished from Kow Swamp and Coobool Creek male mandibles (Murray Valley, terminal Pleistocene) by being smaller and having different shape characteristics, as well as smaller teeth and a slower rate of tooth wear. It pairs with the Liang Lemdubu female (Late Glacial Maximum, Aru Islands) in suggesting that the morphology of the terminal Pleistocene inhabitants of tropical Sahul was gracile compared to their contemporaries within the southern Murray drainage. An explanatory scenario for this morphological contrast is developed in the context of the Homo sapiens early fossil record, Australasian mtDNA evidence, terminal Pleistocene climatic variation, and the possibility of multiple entry points into Sahul. Copyright © 2010 Elsevier GmbH. All rights reserved.

An Early Pleistocene hominin mandible from Atapuerca-TD6, Spain

PubMed Central

Carbonell, E.; Bermúdez de Castro, J. M.; Arsuaga, J. L.; Allue, E.; Bastir, M.; Benito, A.; Cáceres, I.; Canals, T.; Díez, J. C.; van der Made, J.; Mosquera, M.; Ollé, A.; Pérez-González, A.; Rodríguez, J.; Rodríguez, X. P.; Rosas, A.; Rosell, J.; Sala, R.; Vallverdú, J.; Vergés, J. M.

2005-01-01

We present a mandible recovered in 2003 from the Aurora Stratum of the TD6 level of the Gran Dolina site (Sierra de Atapuerca, northern Spain). The specimen, catalogued as ATD6-96, adds to the hominin sample recovered from this site in 1994–1996, and assigned to Homo antecessor. ATD6-96 is the left half of a gracile mandible belonging to a probably female adult individual with premolars and molars in place. This mandible shows a primitive structural pattern shared with all African and Asian Homo species. However, it is small and exhibits a remarkable gracility, a trait shared only with the Early and Middle Pleistocene Chinese hominins. Furthermore, none of the mandibular features considered apomorphic in the European Middle and Early Upper Pleistocene hominin lineage are present in ATD6-96. This evidence reinforces the taxonomic identity of H. antecessor and is consistent with the hypothesis of a close relationship between this species and Homo sapiens. PMID:15824320

Global human mandibular variation reflects differences in agricultural and hunter-gatherer subsistence strategies

PubMed Central

von Cramon-Taubadel, Noreen

2011-01-01

Variation in the masticatory behavior of hunter-gatherer and agricultural populations is hypothesized to be one of the major forces affecting the form of the human mandible. However, this has yet to be analyzed at a global level. Here, the relationship between global mandibular shape variation and subsistence economy is tested, while controlling for the potentially confounding effects of shared population history, geography, and climate. The results demonstrate that the mandible, in contrast to the cranium, significantly reflects subsistence strategy rather than neutral genetic patterns, with hunter-gatherers having consistently longer and narrower mandibles than agriculturalists. These results support notions that a decrease in masticatory stress among agriculturalists causes the mandible to grow and develop differently. This developmental argument also explains why there is often a mismatch between the size of the lower face and the dentition, which, in turn, leads to increased prevalence of dental crowding and malocclusions in modern postindustrial populations. Therefore, these results have important implications for our understanding of human masticatory adaptation. PMID:22106280

Longitudinal study of relative growth rates of the maxilla and the mandible according to quantitative cervical vertebral maturation.

PubMed

Chen, Lili; Liu, Jiarong; Xu, Tianmin; Lin, Jiuxiang

2010-06-01

The purpose of this study was to investigate the relative growth rates (RGR) of the maxilla and the mandible according to quantitative cervical vertebral maturation (QCVM) of adolescents with normal occlusion. Mixed longitudinal data were used. The sample included 87 adolescents (32 boys, 55 girls) from 8 to 18 years of age with normal occlusion, selected from 901 candidates. Sequential lateral cephalograms and hand-wrist films were taken once a year for 6 consecutive years. The growth magnitude (GM) and RGR of the maxilla and the mandible were measured and analyzed. GM and RGR were not always consistent, because subjects had different periods of time between the QCVM stages. GM was not as reliable as RGR. RGR had no significant sex differences in the maxilla and the mandible, in spite of different decelerating curves. However, statistically significant sex differences were found in the GM of mandibular measurements. The greatest growth potentials were not synchronized between the maxilla and the mandible. For both sexes, the greatest RGR of maxillary length and height was in QCVM stage I; then, deceleration occurred. The greatest RGR of mandibular length and height was in QCVM stage II, and the next largest was in QCVM stage I. Understanding the RGR can provide references for orthodontic treatment and orthognathic surgery. 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

The effect of fluoridation and its discontinuation on fluoride profiles in the alveolar bone of rat.

PubMed

Ohmi, Kyohei; Nakagaki, Haruo; Tsuboi, Shinji; Okumura, Akihiro; Sugiyama, Tomoko; Thuy, Tran Thu; Robinson, Colin

2005-10-01

We investigated the effect of fluoridation and its discontinuation on fluoride content in the alveolar portion of the mandible in rats. Drinking water with three different fluoride contents (0, 50, 100 ppmF) was given to rats for three different periods (4, 13 and 25 weeks). Fluoride concentrations were measured in the crest, the middle, and the apical parts of the alveolar bone and in the body of the mandible. Furthermore, after fluoridated drinking water was given to rats for 4 or 13 weeks, distilled water was given to them for 21 or 12 weeks respectively; and the effect of the discontinuation on fluoride profiles was investigated. Layer samples were analyzed by abrasive microsampling. Fluoride and phosphorus concentrations were determined by ion-specific electrode and colorimetric procedures, respectively. There was an increase in fluoride concentrations in the mandible in proportion to the fluoride content in the drinking water and the duration of fluoridation. After fluoridation was discontinued, fluoride concentrations in the surface layers of the mandible presented a decrease. Among the four different parts of the mandible, the upper part of the alveolar bone and the alveolar crest part presented the highest rates of reduction. The relative reduction rate of fluoride concentration was closely related to the duration of discontinuation. The alveolar crest was affected most by the discontinuation of fluoridation, presenting the greatest reduction.

Bilateral bifid mandibular canal

PubMed Central

Sheikhi, Mahnaz; Badrian, Hamid; Ghorbanizadeh, Sajad

2012-01-01

One of the normal interesting variations that we may encounter in the mandible is bifid mandibular canal. This condition can lead to difficulties when performing mandibular anesthesia or during extraction of lower third molar, placement of implants, and surgery in the mandible. Therefore diagnosis of this variation is sometimes very important and necessary. PMID:23814555

Congenital zygomatico-mandibular fusion (pseudo-syngnathia?) in conjunction with unilateral anophthalmia: review of terminology and classification.

PubMed

Tauro, David P; Kallappanavar, N K; Kiran, H Y; Girhe, Vijaykumar J

2012-09-01

Syngnathia per se is a rare congenital disorder. A literature survey reveals a total of 26 cases of syngnathia in the English literature since 1936, of which only seven cases involved fusion of the ascending ramus of the mandible to the posterior portion of the maxilla and zygomatic complex. The remaining 19 involved fusion of the alveolar ridges of the maxilla and mandible. This is a unique case of fusion of the mandible to the zygomatic complex presenting with a unilateral anophthalmic orbit in an 18-day-old neonate. The use of the term syngnathia has been reviewed and a modification in classification has been suggested.

Temporal distribution of endogenous retinoids in the embryonic mouse mandible.

PubMed

Beeman, C S; Kronmiller, J E

1994-09-01

Retinoids play an important part in embryonic pattern formation. They are necessary for normal differentiation of odontogenic tissues and, in excess, disrupt the pattern of tooth formation. Excess retinoids produce supernumerary buds of the dental lamina in the diastema region of the mouse embryonic mandible where teeth do not normally form. This effect is coincident with an increase in epithelial proliferation and an alteration in epidermal growth factor mRNA expression (a gene product necessary for tooth formation). It was found by high-performance liquid chromatography that endogenous retinoids are present in the developing murine mandible and that concentrations of some retinoids reach a peak at the time of the initiation of odontogenesis (dental lamina formation).

Spatial distribution of endogenous retinoids in the murine embryonic mandible.

PubMed

Kronmiller, J E; Beeman, C S

1994-12-01

Retinoids play an important part in pattern formation during embryonic development. Exogenous retinoids alter the pattern of skeletal, neural and odontogenic tissues. Endogenous retinoids have been demonstrated previously in the murine embryonic mandible, reaching a concentration peak during the initiation of odontogenesis. It was now found that endogenous retinoids are present in a concentration gradient in the embryonic mouse mandible at the time of the initiation of the dental lamina. All-trans-retinoic acid was more concentrated in the incisor region and retinol in the molar region. These results, and the fact that exogenous retinoids produce supernumerary incisors and missing molars, suggest that all-trans-retinoic acid may instruct incisor morphology.

Cemento-ossifying fibroma of mandible: An unusual case report and review of literature.

PubMed

Mohapatra, Mounabati; Banushree, C S; Nagarajan, K; Pati, Debashish

2015-01-01

The term ossifying fibroma (OF) has recently been included under fibro-osseous lesions. Cemento-OF (COF) is a benign neoplasm that arises from the periodontal membrane which contains multipotential cells that are capable of forming cementum, lamellar bone and fibrous tissue. These tumors occur in the third and fourth decades of life with a predilection for women. The mandible is more commonly involved than the maxilla. This lesion has caused considerable controversy regarding the use of terminology, origin and diagnostic criteria. This article describes an unusual case of COF presenting as unilocular lytic lesion of mandible in a 38-year-old male patient with review of literature.

Cemento-ossifying fibroma of mandible: An unusual case report and review of literature

PubMed Central

Mohapatra, Mounabati; Banushree, CS; Nagarajan, K; Pati, Debashish

2015-01-01

The term ossifying fibroma (OF) has recently been included under fibro-osseous lesions. Cemento-OF (COF) is a benign neoplasm that arises from the periodontal membrane which contains multipotential cells that are capable of forming cementum, lamellar bone and fibrous tissue. These tumors occur in the third and fourth decades of life with a predilection for women. The mandible is more commonly involved than the maxilla. This lesion has caused considerable controversy regarding the use of terminology, origin and diagnostic criteria. This article describes an unusual case of COF presenting as unilocular lytic lesion of mandible in a 38-year-old male patient with review of literature. PMID:26980975

Cineradiographic Examination of Articulatory Movement of Pseudo-Tongue, Hyoid, and Mandible in Congenital Aglossia

ERIC Educational Resources Information Center

McMicken, Betty; Vento-Wilson, Margaret; Von Berg, Shelley; Rogers, Kelly

2014-01-01

This research examined cineradiographic films (CRF) of articulatory movements in a person with congenital aglossia (PWCA) during speech production of four phrases. Pearson correlations and a multiple regression model investigated co-variation of independent variables, positions of mandible and hyoid; and pseudo-tongue-dependent variables,…

Duplication of lower lip and mandible--a rare diprosopus.

PubMed

Suhaili, D N Pengiran; Somasundaram, S; Lau, S H; Ajura, A J; Roslan, A R; Ramli, R

2011-01-01

Diprosopus or duplication of the lower lip and mandible is a very rare congenital anomaly. We report this unusual case occurring in a girl who presented to our hospital at the age of 4 months. Surgery and problems related to this anomaly are discussed. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Finite element analysis of the human mastication cycle.

PubMed

Commisso, Maria S; Martínez-Reina, Javier; Ojeda, Joaquín; Mayo, Juana

2015-01-01

The aim of this paper is to propose a biomechanical model that could serve as a tool to overcome some difficulties encountered in experimental studies of the mandible. One of these difficulties is the inaccessibility of the temporomandibular joint (TMJ) and the lateral pterygoid muscle. The focus of this model is to study the stresses in the joint and the influence of the lateral pterygoid muscle on the mandible movement. A finite element model of the mandible, including the TMJ, was built to simulate the process of unilateral mastication. Different activation patterns of the left and right pterygoid muscles were tried. The maximum stresses in the articular disc and in the whole mandible during a complete mastication cycle were reached during the instant of centric occlusion. The simulations show a great influence of the coordination of the right and left lateral pterygoid muscles on the movement of the jaw during mastication. An asynchronous activation of the lateral pterygoid muscles is needed to achieve a normal movement of the jaw during mastication. Copyright © 2014 Elsevier Ltd. All rights reserved.

Pre-operative planning for mandibular reconstruction - A full digital planning workflow resulting in a patient specific reconstruction

PubMed Central

2011-01-01

Objectives Reconstruction of large mandiblular defects following ablative oncologic surgery could be done by using vascularized bone transfer or, more often, primarily with simultaneous or delayed bone grafting, using load bearing reconstruction plates. Bending of these reconstruction plates is typically directed along the outer contour of the original mandible. Simultaneously or in a second operation vascularized or non-vascularized bone is fixed to the reconstruction plate. However, the prosthodontic-driven backward planning to ease bony reconstruction of the mandible in terms of dental rehabilitation using implant-retained overdentures might be an eligible solution. The purpose of this work was to develop, establish and clinically evaluate a novel 3D planning procedure for mandibular reconstruction. Materials and methods Three patients with tumors involving the mandible, which included squamous cell carcinoma in the floor of the mouth and keratocystic odontogenic tumor, were treated surgically by hemimandibulectomy. Results In primary alloplastic mandible reconstruction, shape and size of the reconstruction plate could be predefined and prebent prior to surgery. Clinical relevance This study provides modern treatment strategies for mandibular reconstruction. PMID:21968330

Application of two segmentation protocols during the processing of virtual images in rapid prototyping: ex vivo study with human dry mandibles.

PubMed

Ferraz, Eduardo Gomes; Andrade, Lucio Costa Safira; dos Santos, Aline Rode; Torregrossa, Vinicius Rabelo; Rubira-Bullen, Izabel Regina Fischer; Sarmento, Viviane Almeida

2013-12-01

The aim of this study was to evaluate the accuracy of virtual three-dimensional (3D) reconstructions of human dry mandibles, produced from two segmentation protocols ("outline only" and "all-boundary lines"). Twenty virtual three-dimensional (3D) images were built from computed tomography exam (CT) of 10 dry mandibles, in which linear measurements between anatomical landmarks were obtained and compared to an error probability of 5 %. The results showed no statistically significant difference among the dry mandibles and the virtual 3D reconstructions produced from segmentation protocols tested (p = 0,24). During the designing of a virtual 3D reconstruction, both "outline only" and "all-boundary lines" segmentation protocols can be used. Virtual processing of CT images is the most complex stage during the manufacture of the biomodel. Establishing a better protocol during this phase allows the construction of a biomodel with characteristics that are closer to the original anatomical structures. This is essential to ensure a correct preoperative planning and a suitable treatment.

Exploration of the Genetic Organization of Morphological Modularity on the Mouse Mandible Using a Set of Interspecific Recombinant Congenic Strains Between C57BL/6 and Mice of the Mus spretus Species

PubMed Central

Burgio, Gaëtan; Baylac, Michel; Heyer, Evelyne; Montagutelli, Xavier

2012-01-01

Morphological integration and modularity within semi-autonomous modules are essential mechanisms for the evolution of morphological traits. However, the genetic makeup responsible for the control of variational modularity is still relatively unknown. In our study, we tested the hypothesis that the genetic variation for mandible shape clustered into two morphogenetic components: the alveolar group and the ascending ramus. We used the mouse as a model system to investigate genetics determinants of mandible shape. To do this, we used a combination of geometric morphometric tools and a set of 18 interspecific recombinant congenic strains (IRCS) derived from the distantly related species, Mus spretus SEG/Pas and Mus musculus C57BL/6. Quantitative trait loci (QTL) analysis comparing mandible morphometry between the C57BL/6 and the IRCSs identified 42 putative SEG/Pas segments responsible for the genetic variation. The magnitude of the QTL effects was dependent on the proportion of SEG/Pas genome inherited. Using a multivariate correlation coefficient adapted for modularity assessment and a two-block partial least squares analysis to explore the morphological integration, we found that these QTL clustered into two well-integrated morphogenetic groups, corresponding to the ascending ramus and the alveolar region. Together, these results provide evidence that the mouse mandible is subjected to genetic coordination in a modular manner. PMID:23050236

Postglacial recolonization and Holocene diversification of Crocidura suaveolens (Mammalia, Soricidae) on the north-western fringe of the European continent

NASA Astrophysics Data System (ADS)

Rofes, Juan; Cucchi, Thomas; Hanot, Pauline; Herman, Jeremy; Stephan, Pierre; Cersoy, Sophie; Horáček, Ivan; Kerr, Elizabeth; Allberry, Kate; Valenzuela, Silvia; Zazzo, Antoine; Cornette, Raphaël; Tresset, Anne

2018-06-01

Phenotypic variation was characterized in 187 modern and archaeological specimens of the lesser white-toothed shrew (Crocidura suaveolens), obtained from both insular and continental European locations. Geometric morphometric methods were used to quantify variation in size and shape of the mandible. The phenotypic distance between populations, and the influence of several eco-geographical factors on the size and shape of the mandible in island populations, were assessed. Based on mandible shape divergence, the populations of C. suaveolens were clustered into continental, insular Atlantic and insular Mediterranean groups. Archaeological specimens from Molène Island, more than 3400 years old, display a mandible shape signal closer to that of the continental population than those of modern island populations. Conversely, the continental shape signals of the modern populations from Höedic and Sark suggest that these are relatively recent anthropogenic introductions. The populations of C. suaveolens from both the Atlantic and Mediterranean islands (except for Rouzic and Cyprus) show a significant increase in mandible size, compared to those from continental Europe. Significant phenotypic differences support the indigenous condition of C. suaveolens on most of the Atlantic islands, suggesting that the species arrived there before the separation of the Scilly Isles and Ushant from the continent due to the post-glacial rise in sea level. This provides an ante quem for its colonization of the north-western fringe of continental Europe, notwithstanding its absence from the region in the present day.

Biomechanical analysis comparing natural and alloplastic temporomandibular joint replacement using a finite element model.

PubMed

Mesnard, Michel; Ramos, Antonio; Ballu, Alex; Morlier, Julien; Cid, M; Simoes, J A

2011-04-01

Prosthetic materials and bone present quite different mechanical properties. Consequently, mandible reconstruction with metallic materials (or a mandible condyle implant) modifies the physiologic behavior of the mandible (stress, strain patterns, and condyle displacements). The changing of bone strain distribution results in an adaptation of the temporomandibular joint, including articular contacts. Using a validated finite element model, the natural mandible strains and condyle displacements were evaluated. Modifications of strains and displacements were then assessed for 2 different temporomandibular joint implants. Because materials and geometry play important key roles, mechanical properties of cortical bone were taken into account in models used in finite element analysis. The finite element model allowed verification of the worst loading configuration of the mandibular condyle. Replacing the natural condyle by 1 of the 2 tested implants, the results also show the importance of the implant geometry concerning biomechanical mandibular behavior. The implant geometry and stiffness influenced mainly strain distribution. The different forces applied to the mandible by the elevator muscles, teeth, and joint loads indicate that the finite element model is a relevant tool to optimize implant geometry or, in a subsequent study, to choose a more suitable distribution of the screws. Bone screws (number and position) have a significant influence on mandibular behavior and on implant stress pattern. Stress concentration and implant fracture must be avoided. Copyright © 2011 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Evolution of Skull and Mandible Shape in Cats (Carnivora: Felidae)

PubMed Central

Christiansen, Per

2008-01-01

The felid family consists of two major subgroups, the sabretoothed and the feline cats, to which all extant species belong, and are the most anatomically derived of all carnivores for predation on large prey with a precision killing bite. There has been much controversy and uncertainty about why the skulls and mandibles of sabretoothed and feline cats evolved to become so anatomically divergent, but previous models have focused on single characters and no unifying hypothesis of evolutionary shape changes has been formulated. Here I show that the shape of the skull and mandible in derived sabrecats occupy entirely different positions within overall morphospace from feline cats, and that the evolution of skull and mandible shape has followed very different paths in the two subgroups. When normalised for body-size differences, evolution of bite forces differ markedly in the two groups, and are much lower in derived sabrecats, and they show a significant relationship with size and cranial shape, whereas no such relationship is present in feline cats. Evolution of skull and mandible shape in modern cats has been governed by the need for uniform powerful biting irrespective of body size, whereas in sabrecats, shape evolution was governed by selective pressures for efficient predation with hypertrophied upper canines at high gape angles, and bite forces were secondary and became progressively weaker during sabrecat evolution. The current study emphasises combinations of new techniques for morphological shape analysis and biomechanical studies to formulate evolutionary hypotheses for difficult groups. PMID:18665225

The Design of Mechanically Compatible Fasteners for Human Mandible Reconstruction

NASA Technical Reports Server (NTRS)

Roberts, Jack C.; Ecker, John A.; Biermann, Paul J.

1993-01-01

Mechanically compatible fasteners for use with thin or weakened bone sections in the human mandible are being developed to help reduce large strain discontinuities across the bone/implant interface. Materials being considered for these fasteners are a polyetherertherketone (PEEK) resin with continuous quartz or carbon fiber for the screw. The screws were designed to have a shear strength equivalent to that of compact/trabecular bone and to be used with a conventional nut, nut plate, or an expandable shank/blind nut made of a ceramic filled polymer. Physical and finite element models of the mandible were developed in order to help select the best material fastener design. The models replicate the softer inner core of trabecular bone and the hard outer shell of compact bone. The inner core of the physical model consisted of an expanding foam and the hard outer shell consisted of ceramic particles in an epoxy matrix. This model has some of the cutting and drilling attributes of bone and may be appropriate as an educational tool for surgeons and medical students. The finite element model was exercised to establish boundary conditions consistent with the stress profiles associated with mandible bite forces and muscle loads. Work is continuing to compare stress/strain profiles of a reconstructed mandible with the results from the finite element model. When optimized, these design and fastening techniques may be applicable, not only to other skeletal structures, but to any composite structure.

Cephalometric superimpositions.

PubMed

Gu, Yan; McNamara, James A

2008-11-01

To test the hypothesis that there is no difference between the information produced by superimposition of serial lateral headfilms on anatomical structures and that produced by superimposition on metallic implants according to the protocols of Björk. Serial cephalograms of 10 untreated subjects who had tantalum implants placed in the maxilla and mandible during childhood were analyzed. Headfilms taken at six consecutive stages of cervical vertebral maturation (CS1-CS6) for six female and four male subjects were used. Tracings were superimposed according to the methods of superimpositions advocated by the American Board of Orthodontics (ABO). In addition, superimpositions along the inferior border of the mandible were performed. Finally, superimpositions of serial tracings on stable intraosseous implants were made to determine the actual growth and remodeling patterns of the maxilla and mandible. The ABO maxillary superimposition method underestimates the vertical displacement and overestimates the forward movement of maxillary landmarks. Superimposing on the internal cortical outline of the symphysis and the inferior alveolar nerve canals generally approximates the mandibular superimposition on implants, although the lower anterior border of the symphysis may be a preferable area of superimposition. Superimposition on the lower border of the mandible does not reflect accurately the actual pattern of growth and remodeling of the mandible. When analyzing serial headfilms, erroneous information concerning patterns of bone growth and remodeling can be obtained if convenient, but biologically incorrect superimposition protocols are used. In addition, tooth movements measured can be distorted significantly depending on the method of superimposition.

On the Variability of the Dmanisi Mandibles

PubMed Central

Bermúdez de Castro, José María; Martinón-Torres, María; Sier, Mark Jan; Martín-Francés, Laura

2014-01-01

The description of a new skull (D4500) from the Dmanisi site (Republic of Georgia) has reopened the debate about the morphological variability within the genus Homo. The new skull fits with a mandible (D2600) often referred as ‘big’ or ‘enigmatic’ because of its differences with the other Dmanisi mandibles (D211 and D2735). In this report we present a comparative study of the variability of the Dmanisi mandibles under a different perspective, as we focus in morphological aspects related to growth and development. We have followed the notion of modularity and phenotypic integration in order to understand the architectural differences observed within the sample. Our study reveals remarkable shape differences between D2600 and the other two mandibles, that are established early in the ontogeny (during childhood or even before) and that do not depend on size or sexual dimorphism. In addition, D2600 exhibits a mosaic of primitive and derived features regarding the Homo clade, which is absent in D211 and D2735. This mosaic expression is related to the location of the features and can be explained under the concept of modularity. Our study would support the possibility of two different paleodemes represented at the Dmanisi site. This hypothesis has been previously rejected on the basis that all the individuals were constrained in the same stratigraphic and taphonomic settings. However, our revision of the complex Dmanisi stratigraphy suggests that the accumulation could cover an undetermined period of time. Even if “short” in geological terms, the hominin accumulation was not necessarily synchronic. In the same line we discard that the differences between D2600 and the small mandibles are consequence of wear-related dentoalveolar remodeling. In addition, dental wear pattern of D2600 could suggest an adaptation to a different ecological niche than the other Dmanisi individuals. PMID:24586309

An ultrastructural study on indirect injury of dental pulp caused by high-speed missile projectile to mandible in dogs.

PubMed

Ren, Changqun; Liu, Ruifeng; Tian, Lei; Chen, Peng; Zhou, Shuxia

2008-12-01

The aim of this study was to evaluate the characteristics of indirect injury of dental pulp caused by high-speed missile projectile to mandible in dogs. Eighteen dogs aged 12-13 months were divided equally into six groups (n = 3 in each group) with random allocation, then a high-speed missile projectile (a ball bearing of stainless steel, phi6.0 mm, 0.88 g) was shot at right mandible body (the wound tract was below the fourth premolar, 1 cm or so to the root tips) of each dog, but the teeth were not wounded directly. The dogs were killed 6 h (n = 3), 24 h (n = 3), 3 days (n = 3), 7 days (n = 3), 2 weeks (n = 3) and 4 weeks (n = 3) after the wound, respectively; then ultrastructural change of dental pulp of the fourth premolar and the second premolar of right mandible, and the second premolar of left mandible was observed through transmission electron microscope. The results showed that mean initial velocity of projectiles was 778.0 +/- 33.2 m s(-1) and mean projection energy was 266.1 +/- 19.1 J, which were in conformity with parameters of gunshot wound. On the wound side, dental pulp of the fourth mandibular premolar was injured seriously and irreversible necrosis happened in the end; yet, dental pulp of the second mandibular premolar was injured less seriously, reversibly; on the opposite side, dental pulp of the second mandibular premolar was injured slightly and temporarily. It may be concluded that there are several characteristics in indirect injury of dental pulp caused by high-speed missile projectile to dogs' mandible: the injured area is relatively extensive; traumatic degree decreases progressively and sharply with the distance to the wound tract increasing; ultrastructural change of nerval damage takes place in early stage after wound, etc.

78 FR 61621 - Endangered and Threatened Wildlife and Plants; Proposed Threatened Status for the Western...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-03

... length, depth of upper mandible, and wing length) of almost 700 specimens of adult yellow-billed cuckoos... wing length, bill length, and mandible depth; and (3) no statistically significant differences for... west side of the Cascades at the Sandy River Delta near its confluence with the Columbia River in July...

The mandibular canal of the "old man" of Cro-Magnon: anatomical-radiological study.

PubMed

Goudot, Patrick

2002-08-01

The radiological study of the 'old man' of Cro-Magnon mandible complements the one published about the mandibular canal of the "Neanderthal Man" of La Chapelle-aux-Saints with which it is compared. The purpose of this study was to explore the internal structure of this famous fossil. The mandible of the "old man" of Cro-Magnon (22,000 BC) was studied with panoramic radiography and CT scanning. The mandibular canal is similar to that of modern man. The images obtained are of a good quality and can be used for analysis of the internal structures of bony fossils. The mandible of the "old man" of Cro-Magnon belongs to the species Homo sapiens sapiens. Copyright 2002 Published by Elsevier Science Ltd.

Massive dedifferentiated chondrosarcoma affecting whole mandible with high recurrence potential

PubMed Central

Mishra, Niranjan; Singh, Akhilesh Kumar; Agrawal, Rahul; Singh, Shreya

2015-01-01

Chondrosarcomas (CS) are slow-growing, malignant mesenchymal tumors characterized by the formation of cartilage by the tumor cells. Benign cartilage-producing tumors within the jaws are extremely uncommon, but most ultimately prove to represent low-grade CS. In the maxillofacial region, the maxilla is more commonly affected than the mandible, it comprises less than 2% of all jaw tumors. Clinically, the tumor presents as a swelling that may be painful and cause loosening of the involved teeth, with widening of the periodontal ligament space. The treatment of such lesions is wide surgical excision with regular follow up. The present report discusses the case of a 55-year-old female patient with massive multiple recurring dedifferentiated CS of mandible. PMID:27390502

Measurement of intraosseous pressures generated by the Wand, high-pressure periodontal ligament syringe, and the Stabident system.

PubMed

Shepherd, P A; Eleazer, P D; Clark, S J; Scheetz, J P

2001-06-01

Intraosseous pressure generated by the use of three anesthetic systems-the Wand; a hand-operated high-pressure periodontal ligament (PDL) syringe; and the Stabident system-were studied in fresh mandibles of 14 large swine. The mandibles were drilled and tapped in one area of both the right and left posterior molar regions. Pressure gauges were attached via threaded fittings. Pressures during injection were recorded for the Wand first, then the PDL syringe, and finally Stabident. Results showed averages of 8.3 mm Hg generated by the Wand, 16.3 mm Hg with the high-pressure PDL syringe, and 43.7 mm Hg from the Stabident system. Results were corroborated with data from three human cadaver mandibles.

[Dynamic magnetotherapy use in comprehensive treatment phlegmons of maxillofacial region and mandible fractures].

PubMed

Lepilin, A V; Raĭgorodckiĭ, Iu M; Nozdrachev, V G; Erokina, N L

2007-01-01

145 patients (60 with phlegmons of submandibular and submental regions, 85--with fractures of mandible) were observed and treated with the use of moving pulse magnetic field (MPMF) produced by special apparatus (AMO-ATOS-E, , Saratov-city), 60 patients with the same pathology were treated by traditional physical methods and served as control. Use of MPMF led to quicker patient recovery: quicker reduction (if compared with traditional physical methods of treatment) of oedema and soft tissue inflammatory infiltration, quicker relief from inflammatory reaction (according to data of cytokinin profile), improvement of tissue blood supply in the region of fractures in patients with mandible fractures. As the result--we had shortening treatment terms of such patients and complication number reduction.

Realization of masticatory movement by 3-dimensional simulation of the temporomandibular joint and the masticatory muscles.

PubMed

Park, Jong-Tae; Lee, Jae-Gi; Won, Sung-Yoon; Lee, Sang-Hee; Cha, Jung-Yul; Kim, Hee-Jin

2013-07-01

Masticatory muscles are closely involved in mastication, pronunciation, and swallowing, and it is therefore important to study the specific functions and dynamics of the mandibular and masticatory muscles. However, the shortness of muscle fibers and the diversity of movement directions make it difficult to study and simplify the dynamics of mastication. The purpose of this study was to use 3-dimensional (3D) simulation to observe the functions and movements of each of the masticatory muscles and the mandible while chewing. To simulate the masticatory movement, computed tomographic images were taken from a single Korean volunteer (30-year-old man), and skull image data were reconstructed in 3D (Mimics; Materialise, Leuven, Belgium). The 3D-reconstructed masticatory muscles were then attached to the 3D skull model. The masticatory movements were animated using Maya (Autodesk, San Rafael, CA) based on the mandibular motion path. During unilateral chewing, the mandible was found to move laterally toward the functional side by contracting the contralateral lateral pterygoid and ipsilateral temporalis muscles. During the initial mouth opening, only hinge movement was observed at the temporomandibular joint. During this period, the entire mandible rotated approximately 13 degrees toward the bicondylar horizontal plane. Continued movement of the mandible to full mouth opening occurred simultaneously with sliding and hinge movements, and the mandible rotated approximately 17 degrees toward the center of the mandibular ramus. The described approach can yield data for use in face animation and other simulation systems and for elucidating the functional components related to contraction and relaxation of muscles during mastication.

Architecture and Microstructure of Cortical Bone in Reconstructed Canine Mandibles after Bone Transport Distraction Osteogenesis

PubMed Central

Zapata, Uriel; Halvachs, Emily K.; Dechow, Paul C.; Elsalanty, Mohammed E.; Opperman, Lynne A.

2011-01-01

Purpose Reconstruction of the canine mandible using bone transport distraction osteogenesis has been shown to be a suitable method for correcting segmental bone defects produced by cancer, gunshots, and trauma. Although the mechanical quality of the new regenerate cortical bone seems to be related to the mineralization process, several questions regarding the micro-structural patterns of the new bony tissue remain unanswered. The purpose of this study was to quantify any microstructural differences that may exist between the regenerate and control cortical bone. Methods Five adult American foxhound dogs underwent unilateral bone transport distraction of the mandible to repair 30–35 mm bone defects. Animals were sacrificed 12 weeks after the beginning of the consolidation period. Fourteen cylindrical cortical samples were extracted from the superior, medial, and inferior aspects of the lingual and buccal plates of the reconstructed aspect of the mandible and 21 specimens were collected similarly from the contralateral aspect of the mandible. The specimens were evaluated using histomorphometric and micro-computed tomography techniques to compare their microstructure. Results Except for differences in Haversian canal area, histomorphometric analyses suggested no statistical differences in microstructure between regenerate and control cortical bone. Morphological evaluation suggested a consistent level of anisotropy possibly related to the distraction vector. Conclusions After 12 weeks consolidation, bone created during bone transport distraction osteogenesis is comparable to native bone in microstructure, architecture, and mechanical properties. It is proposed that after enough time, the properties of the regenerate bone will be identical to that of native bone. PMID:21927873

Mechanical evaluation of the SLM fabricated, stiffness-matched, mandibular bone fixation plates

NASA Astrophysics Data System (ADS)

Jahadakbar, Ahmadreza; Shayesteh Moghaddam, Narges; Amerinatanzi, Amirhesam; Dean, David; Elahinia, Mohammad

2018-03-01

The standard of the care for the treatment of mandibular segmental defects is the use of Ti-6Al-4V bone fixation plates and screws to immobilize the grafted bone and the host mandible. While Ti-6Al-4V bone fixation plates provide strong immobilization during the healing period, they may disturb the stress distribution in the repaired mandible. The highly stiff Ti-6Al-4V fixation carries a great portion of the load which was previously borne by the mandible, and stress shielding may occur on the surrounding cortical bone. Based on the bone remodeling theory, stress shielding causes bone resorption in the effected region and may eventually lead to the failure of the surgical reconstruction. To address this issue, we have developed a new generation of the patient-specific, porous NiTi bone fixation plates which benefit from stiffness-matching of the adjacent bone. Using the CT scan data of the patient's defective mandible, the geometry for the required bone fixation plates is designed and the stiffness of the surrounding regions is measured. By introducing specific level and type of porosity to the bone fixation plate, its stiffness can be tuned. Finite Element simulations has verified the reduced level of stress shielding on the reconstructed mandible, in case of using the proposed bone fixation plates. Selective Lase Sintering has been used for fabrication of the porous NiTi bone fixation plates with six different levels of stiffness. Finite element simulations, and mechanical tests have been done to verify the performance of the fabricated parts resulting from our design and fabrication method.

Features of lateral cephalograms associated with difficult laryngoscopy in Japanese children undergoing oral and maxillofacial surgery.

PubMed

Kohjitani, Atsushi; Miyawaki, Takuya; Miyawaki, Shouichi; Nakamura, Norifumi; Iwase, Yoko; Nishihara, Kazuhide; Ohno, Sachi; Shimada, Masahiko; Sugiyama, Kazuna

2013-11-01

Difficult laryngoscopy and tracheal intubation are occasionally encountered in children with congenital anomalies or micrognathia. However, no study has elucidated anatomical etiology in relation to craniofacial development. Two hundred ten patients aged 8 months-18 years were analyzed. We analyzed the lateral cephalograms of: (i) eight patients in whom laryngoscopy was anticipated as difficult before anesthesia and who were unable to be intubated by direct laryngoscopy and needed fiberoptic bronchoscopy (group A); (ii) 11 patients in whom laryngoscopy was anticipated as difficult before anesthesia but who were able to be intubated by direct laryngoscopy (group B); and (iii) 191 patients in whom laryngoscopy was anticipated as easy before anesthesia and was actually found to be easy (group C). Eight cephalometric parameters were measured and age-parameter relationships were plotted. Logistic regression analysis was performed to characterize group A children for each of the cephalometric variables. Apparently insufficient growth of the mandible was observed in the group A children. Furthermore, the group A children of aged <4 years had undeveloped maxilla, longer mandibular plane-hyoid distances (≥1.3 cm), and deeper depth of the oropharynx; those of aged ≥4 years showed increased inclination of the mandible (sella-nasion plane to mandibular plane angle of ≥46.5°). Difficult laryngoscopy and tracheal intubation are expected in children aged <4 years with lower-positioned hyoid bone caused by caudal larynx as well as undeveloped maxilla and mandible, and in those aged ≥4 years with increased inclination of the mandible as well as undeveloped mandible. © 2013 John Wiley & Sons Ltd.

A finite element study on the effects of midsymphyseal distraction osteogenesis on the mandible and articular disc.

PubMed

Kim, Ki-Nam; Cha, Bong-Kuen; Choi, Dong-Soon; Jang, Insan; Yi, Yang-Jin; Jost-Brinkmann, Paul-Georg

2012-05-01

To evaluate the biomechanical effect of midsymphyseal distraction osteogenesis with three types of distractors on the mandible and articular disc using a three-dimensional finite element model analysis. A virtual model of the mandible was produced from computed tomography scan images of a healthy 27-year-old man. On the finite element model of the mandible, expansion of the bone-borne, tooth-borne, and hybrid type distractors were simulated with the jaw-closing muscles. The displacement and stress distribution of the mandible and articular disc were analyzed. With the bone-borne appliance the alveolar process area was displaced more than the basal bone area. The tooth-borne appliance displaced the mandibular body in a parallel manner and showed high level of the von Mises stress in the alveolar process and the ramal region as well as in the condylar neck area. The hybrid type showed medium amount of displacement and stress distribution compared with the bone-borne and tooth-borne type. At the articular disc the compressive stress was concentrated in the anteromedial and posterolateral area, and it was highest in the tooth-borne distractor, followed by hybrid appliance and bone-borne appliance. The tooth-borne distractor produced more parallel bony widening in the midsymphyseal area and larger expansion in the molar region; however, it induced higher stress concentration on the articular disc than the hybrid appliance and bone-borne appliance. Whether any long-term side effects on the temporomandibular joint are anticipated, especially in tooth-borne distractor, remains to be investigated.

Characterization of the Correct Mandibular Premolar Region for Delayed Dental Implantation in Beagle Dogs.

PubMed

Xie, Chenxi; Fu, Xiaoming; Xu, Ling; Xu, Sheng

2018-05-01

For delayed dental implantation into the mandible, the implant size should be chosen according to the characteristics of that bone. This study investigated anatomic features of the mandible in beagle dogs, to develop recommendations regarding the correct implantation region and available bone area for delayed dental implantation surgery. We used 20 healthy male beagle dogs to create delayed dental implantation models. The dogs' mandibles underwent cone beam CT (CBCT) imaging; the locations of the middle mental foramen and canine root apex were measured on CBCT images. The dogs then were euthanized and their mandibles measured by using a digital vernier caliper. In addition, the correct implantation region and available bone areas were evaluated. The data obtained by using the 2 measuring methods were compared statistically. The results showed that the positions of the middle mental foramen and canine root apex were relatively fixed, with little variation. The implantation and available bone regions showed little variation among dogs and did not differ significantly between the 2 measuring methods. In conclusion, the correct implantation region (mean ± 1 SD) in the beagle mandible for delayed dental implantation surgery was 17.53 ± 0.46 mm in width. The recommended available bone areas (height × width) were 7.22 ± 0.68 mm × 5.32 ± 0.49 mm (P2), 8.21 ± 0.71 mm × 5.81 ± 0.56 mm (P3), and 9.17 ± 0.65 mm × 6.39 ± 0.56 mm (P4) in the premolar region.

A resorbable and rapid method for maxillomandibular fixation in pediatric mandible fractures.

PubMed

Eppley, B L

2000-05-01

Maxillomandibular immobilization in pediatric mandible fractures is accomplished through a resorbable screw placed into the zygomatic body to which is attached a large, monofilament, circummandibular suture. Although the screw must be placed intraoperatively, this method of jaw immobilization is rapid, secure, does not damage the teeth, and can be removed in the office in the older child.

The use of resorbable hardware for fixation of pediatric mandible fracture. Case report.

PubMed

Poore, Matthew C; Penna, Kevin J

2008-01-01

The diagnosis and management of mandible fractures in the pediatric patient population can pose multiple challenges to the oral and maxillofacial surgeon. Resorbable plates and screws for fixation in this population are both well tolerated and effective. They enable realignment and stable positioning of rapidly healing fracture segments, while obviating any potential impediments to long-term metal retention.

Case report 834: Chronic sclerosing osteomyelitis of the mandible with long bone periostitis.

PubMed

Stewart, A; Carneiro, R; Pollock, L; Shaw, D

1994-04-01

We present the case of a patient with primary chronic osteomyelitis of the mandible, the radiological appearance of which is compatible with a diagnosis of chronic sclerosing osteomyelitis. The accompanying femoral and tibial periosteal reactive new bone formation and the benign clinical course suggest that this presentation may represent a form of chronic multifocal osteomyelitis.

Effect of pacifier use on mandibular position in preterm infants.

PubMed

Tonkin, Shirley L; Lui, Dana; McIntosh, Christine G; Rowley, Simon; Knight, David B; Gunn, Alistair J

2007-10-01

It has been hypothesized that the association of pacifier use with reduced risk of sudden infant death is mediated by forward movement of the mandible and tongue that helps open the upper airway. Our aim was to examine whether the mandible is moved forward when an infant is sucking on a pacifier, and if so, whether the mandible remains advanced after the pacifier is removed. In sixty clinically stable premature infants (corrected gestation age 36.5 +/- 0.3 weeks, mean +/- SEM) the distance from each ear where the pinna met the cheek to the most prominent point of the chin was measured bilaterally, and the average was used as an index of mandibular position. Mandibular position was determined before and after allowing the infants to suck on a pacifier for 10-15 min, and after removing the pacifier. There was a significant forward movement of the mandible when the infants were sucking on the pacifier (59.5 +/- 0.7 vs. 58.6 +/- 0.7 mm, p = 0.001), with no significant change after the pacifier was removed. Pacifier use in preterm infants was associated with a small significant forward displacement of the jaw. These data suggest that pacifier use may help protect the upper airway.

The Comprehensive AOCMF Classification System: Mandible Fractures- Level 2 Tutorial

PubMed Central

Cornelius, Carl-Peter; Audigé, Laurent; Kunz, Christoph; Rudderman, Randal; Buitrago-Téllez, Carlos H.; Frodel, John; Prein, Joachim

2014-01-01

This tutorial outlines the details of the AOCMF image-based classification system for fractures of the mandible at the precision level 2 allowing description of their topographical distribution. A short introduction about the anatomy is made. Mandibular fractures are classified by the anatomic regions involved. For this purpose, the mandible is delineated into an array of nine regions identified by letters: the symphysis/parasymphysis region anteriorly, two body regions on each lateral side, combined angle and ascending ramus regions, and finally the condylar and coronoid processes. A precise definition of the demarcation lines between these regions is given for the unambiguous allocation of fractures. Four transition zones allow an accurate topographic assignment if fractures end up in or run across the borders of anatomic regions. These zones are defined between angle/ramus and body, and between body and symphysis/parasymphysis. A fracture is classified as “confined” as long as it is located within a region, in contrast to a fracture being “nonconfined” when it extents to an adjoining region. Illustrations and case examples of mandible fractures are presented to become familiar with the classification procedure in daily routine. PMID:25489388

Biodegradable fixation of mandibular fractures in children: stability and early results.

PubMed

Yerit, Kaan C; Hainich, Sibylle; Enislidis, Georg; Turhani, Dritan; Klug, Clemens; Wittwer, Gert; Ockher, Michael; Undt, Gerhard; Kermer, Christian; Watzinger, Franz; Ewers, Rolf

2005-07-01

The aim of this study was to assess the safety and efficiency of biodegradable self-reinforced (SR-PLDLA) bone plates and screws in open reduction and internal fixation of mandible fractures in children. Thirteen patients (5 female, 8 male; mean age 12 years, range 5-16 years) were operated on various fractures of the mandible (2 symphyseal, 6 parasymphyseal, 4 body, 3 angle, 1 ramus, 2 condylar fractures). The mean follow-up time was 26.4 months (range 10.9-43.4 months). Intermaxillary fixation was applied in cases with concomitant condylar fractures up to 3 weeks. Primary healing of the fractured mandible was observed in all patients. Postoperative complications were minor and transient. The outcome of the operations was not endangered. Adverse tissue reactions to the implants, malocclusion, and growth restrictions did not occur during the observation period. Pediatric patients benefit from the advantages of resorbable materials, especially from faster mobilization and the avoidance of secondary removal operations. Based on these preliminary results, self-reinforced fixation devices are safe and efficient in the treatment of pediatric mandible fractures. However, further clinical investigations are necessary to evaluate the long-term reliability.

The TUNEL assay suggests mandibular regression by programmed cell death during presoldier differentiation in the nasute termite Nasutitermes takasagoensis

NASA Astrophysics Data System (ADS)

Toga, Kouhei; Yoda, Shinichi; Maekawa, Kiyoto

2011-09-01

Termite soldiers are the most specialized caste of social insects in terms of their morphology and function. Soldier development requires increased juvenile hormone (JH) titer and the two molts via a presoldier stage. These molts are accompanied by dramatic morphological changes, including the exaggeration and regression of certain organs. Soldiers of the most apical termitid subfamily Nasutitermitinae possess not only a horn-like frontal tube, called the nasus, for the projection of defensive chemicals from the frontal gland reservoir but also regressed mandibles. Although candidate genes regulating soldier mandibular growth were reported in a relatively basal termite species, the regulatory mechanisms of mandibular regression remain unknown. To clarify these mechanisms, we performed morphological and histological examinations of the mandibles during soldier differentiation in Nasutitermes takasagoensis. Mandibular size reduced dramatically during soldier differentiation, and mandibular regression occurred just prior to the presoldier molt. Spotted TUNEL signals were observed in regressing mandibles of presoldiers, suggesting that the regression involved programmed cell death. Because soldiers of N. takasagoensis possess exaggerated organs (nasus and frontal gland), the present results suggest that JH-dependent regressive mechanisms exist in the mandibles without interfering with the formation of the exaggerated organs.

Immediate Implant Placement in Single-Tooth Molar Extraction Sockets: A 1- to 6-Year Retrospective Clinical Study.

PubMed

Amato, Francesco; Polara, Giorgio

The aim of this study was to investigate the survival rate of implants immediately placed in fresh extraction sockets of molars in the maxilla and mandible with a single-stage procedure. A total of 102 patients were treated, and 107 implants (53 in the maxilla and 54 in the mandible) were placed in a fresh molar extraction socket and connected to a healing abutment. After a mean follow-up of 3 years (range: 1 to 6 years) 1 implant failed, for a cumulative success rate of 99.06% (98.11% for the mandible and 100% for the maxilla). The results of this study support placement of an implant immediately after the extraction of a molar, applying a single-stage procedure.

Peripheral osteoma, compound odontoma, focal cemento-osseous dysplasia, and cemento-ossifying fibroma in the same hemimandible: CBCT findings of an unusual case.

PubMed

Borghesi, Andrea; Tonni, Ingrid; Pezzotti, Stefania; Maroldi, Roberto

2017-12-01

Peripheral osteoma is the most common subtype of osteoma that arises most frequently in the craniofacial bones. It may occur at any age with a male-to-female ratio of 2:1. Peripheral osteoma may affect the mandible, particularly the ramus and the condyle. Compound odontoma is a subtype of odontoma that occurs in young subjects without gender predilection. It affects the maxilla more frequently than the mandible. Focal cemento-osseous dysplasia and cemento-ossifying fibroma are 2 benign fibro-osseous lesions with a female predominance that occur most commonly in the posterior region of the mandible. We report the first case involving the simultaneous occurrence of these 4 benign lesions in the same hemimandible diagnosed by CBCT.

[Inferior hemiarthroplasty of the temporo-mandibular joint with articulated condylar prosthesis type Stryker].

PubMed

Bucur, A; Dincă, O; Totan, C; Ghită, V

2007-01-01

The optimal reconstruction of the mandible and of the temporo-mandibular joint after mandibular hemi-resection with disarticulation is still controversial in literature. This paperwork presents our experience on four cases in the reconstruction of the mandible together with the inferior arthroplasty of the temporo-mandibular joint, after the resection of extended benign tumors of the mandible, based on fibular free vascularized grafts having attached a Stryker titanium condylar prosthesis reconstructing the inferior segment of the temporo-mandibular joint. Our results for the this technique were excellent, with a functional rehabilitation very close to normal. After reviewing the various techniques and their arguments in literature, with accent on the TMJ reconstruction, we consider this method to be optimal for the reconstruction of mandibular defects in patients with neoplastic conditions.

Telangiectatic osteosarcoma affecting the mandible

PubMed Central

Naik, LR Kumaraswamy; Shetty, Pushparaja; Teerthanath, S; Jagadeesh, H Makannavar

2014-01-01

Osteosarcomas are relatively rare in jaws and maxillomandibular lesions in children are distinctly uncommon. Telengiactic osteosarcomas in jaws are still a very rare variant and till now just 3 cases are reported in English literature. Herein, we report the first case of telangiectatic osteosarcoma occurring in mandible in pediatric patient. Patient was treated by hemimandibulectomy and is free of disease since seven years with regular follow-up. PMID:25364166

Telangiectatic osteosarcoma affecting the mandible.

PubMed

Naik, Lr Kumaraswamy; Shetty, Pushparaja; Teerthanath, S; Jagadeesh, H Makannavar

2014-09-01

Osteosarcomas are relatively rare in jaws and maxillomandibular lesions in children are distinctly uncommon. Telengiactic osteosarcomas in jaws are still a very rare variant and till now just 3 cases are reported in English literature. Herein, we report the first case of telangiectatic osteosarcoma occurring in mandible in pediatric patient. Patient was treated by hemimandibulectomy and is free of disease since seven years with regular follow-up.

Morphological assessment of the mandibular canal trajectory in edentate subjects.

PubMed

Nimigean, Victor; Sîrbu, Valentin Daniel; Nimigean, Vanda Roxana; Bădiţă, Daniela Gabriela; Poll, Alexandru; Moraru, Simona Andreea; Păun, Diana Loreta

2018-01-01

The mandibular canal and its content represent the vital structure, which can complicate dentoalveolar surgical procedures in the posterior region of the mandible. The purpose of the present study was to determine the path the mandibular canal takes in relation to the horizontal and the vertical anatomical reference planes in edentate subjects, in order to minimize the risk of affecting its neurovascular content during various oral surgery procedures. Morphometric evaluations were performed on 12 dried fully edentulous human mandibles and on cone-beam computed tomography (CBCT) cross-sectional images of the mandible, from 20 patients with either partial or complete edentulism. Both methods were utilized, in three target areas (corresponding to the second premolar, to the first molar and to the second molar regions), in order to measure the distance between the mandibular canal and the following reference points: (i) the lateral (buccal) surface of the mandible (MC-BS distance); (ii) the medial (lingual) surface of the mandible (MC-LS distance); (iii) the alveolar surface of the mandible (MC-AS distance). The results were statistically processed in Stata MP/13 software package using analysis of variance (ANOVA) test. The mandibular canal crossed the trabecular bone from the posterior towards the anterior, and from the lingual towards the buccal, reaching the premolar region, distal to the mental foramen, where it was located in the centre of the trabecular bone, main topographic pattern encountered in 27 (84.37%) of the cases. In five (15.63%) of the cases, in the premolar region, the mandibular canal was located near the buccal cortical plate. The mandibular canal descended from the second molar region towards the premolar region, main topographic pattern found in 28 (87.5%) of the cases. In four (12.5%) cases, the mandibular canal had a descending trajectory in the molar regions and it took a slightly ascending course in the premolar region. According to the results, the second molar region represents the highest risk area in the accidental injury to the content of the mandibular canal, during various oral surgery procedures.

Occlusion of artificial teeth in partial dentures in the "chewing center"--first exploratory population-based evaluations.

PubMed

Kordass, B; Ruge, S; Quooss, A; Hugger, A; Mundt, T

2014-01-01

Occlusal performance is a substantial determinant of the quality of dental prosthetic restorations. In the follow-up (SHIP 1) to the Study of Health in Pomerania (SHIP), a representative population of 3300 subjects was studied in the first exploratory evaluation of the occlusion of artificial teeth in the chewing center (first molar region) of partial dentures. A digital analysis of interocclusal records of habitual intercuspation position (ICP) was performed using the Greifswald Digital Analyzing System (GEDAS), a software package that identifies contact points as transparent areas. 562 subjects (280 men aged 61.7 ± 11.9 years and 282 women aged 60.7 ± 10.7 years) had maxillary removable partial dentures (RPDs), and 619 (271 men aged 65.0 ± 11.5 years and 348 women aged 62.4 ± 10.6 years) had mandibular RPDs. Most RPDs were retained with either attachment retainers (11.7% maxilla, 11.7% mandible), cast clasps (38.4% maxilla, 40.7% mandible), telescopes with double crowns (15.7% maxilla, 19.1% mandible), or wrought wire clasps (16.4% maxilla, 8.2% mandible). Some had a combination of different retention elements. The mean number of artificial teeth was 7.8 ± 2.9 in the maxilla and 7.5 ± 3.0 in the mandible. Only the artificial teeth (first molars) in mandibular partial dentures showed differences in the frequency of occlusal contacts between groups (chi-square test). Of these, telescopic crown-retained RPDs had the highest frequency of occlusal contacts (74.4% at tooth 36 and 77.1% at tooth 46), and wrought wire-retained RPDs had the lowest (48.4% at tooth 36 and 45.2% at tooth 46). The results for RPDs with a free-end saddle were comparable and analogous; contact frequencies for those with an interdental saddle did not differ significantly. Notably, the overall frequency of occlusal contacts was greater for tooth 46 (62.9%) than for tooth 36. In conclusion, when replacing teeth in the chewing center, particularly in the mandible, telescopic crown-retained RPDs offer a distinct advantage in terms of occlusal contacts and thus provide better occlusal stability.

Assessing the Amount of Interdental Bone in Posterior Areas of the Mandible for Placing Orthodontic Mini-Implants

PubMed Central

Esfahanizadeh, Nasrin; Shahraki, Damoun; Daneshparvar, Hamidreza; Talaei Pour, Ahmad Reza; Saghiri, Mohammad Ali; Sheibaninia, Ahmad; Rashtak, Shadab

2013-01-01

Objective : The aim of this study was to assess the amount of interdental bone in posterior areas of the mandible for placing orthodontic mini-implants to provide and control anchorage in orthodontic treatment. Materials and Methods : The amount of interdental bone in areas between the second premolars and first molars, first and second molars on the right and left sides of the mandible were determined in fifty patients by RVG using periapical radiographs. The images were assessed using Cygnus Media Software to determine the mesio-distal width of the interdental bone, starting at the crest of the alveolar bone (2 mm below the CEJ) every one millimeter up to 12 mm from the CEJ. The actual amount of interdental bone and the effect of related factors were assessed using chi-square test at a 95% confidence interval. Results : The minimum desired interdental bone width for placing mini-implants, 3 mm from the CEJ, between the second premolar and first molar and the first and second molars of the mandible on both sides were significantly different (p<0.01): 1.8 mm (31%) more apical in the area between the second premolar and the first molar. There was also a statistically significant difference between the areas under study on the right side (p<0.002), which was 2.2 mm (44%) more apical in the area of the second premolar and the first molar. Conclusion : The most secure site for placing orthodontic mini-implants in the mandible is between the first and second molars at the height of 5.8 mm from the CEJ. PMID:25512751

Facial skeleton asymmetry and its relationship to mastication in the Early Medieval period (Great Moravian Empire, Mikulčice, 9th-10th century).

PubMed

Ibrová, Alexandra; Dupej, Ján; Stránská, Petra; Velemínský, Petr; Poláček, Lumír; Velemínská, Jana

2017-12-01

The aim of this study was to analyse the relationship of mastication and directional asymmetry (DA) of upper facial skeleton in Early Medieval sample from the Mikulčice settlement (Czech Republic). The settlement is divided into two burial areas of presumably different socioeconomic status: the castle and the sub-castle. The material consisted of 193 individuals (125 castle, 68 sub-castle). The relationship of facial skeleton DA and mastication was analysed by examining tooth wear and mandibular shape by means of 3D geometric morphometrics. Tooth wear of premolars and molars was evaluated using appropriate scoring systems. 3D coordinates of 35 mandibular landmarks were scanned using MicroScribe G2X digitizing system. The results did not reveal any significant differences in tooth wear DA or mandible DA values between burial areas or sexes. Mandibular shape, however, differed significantly between burial areas and sexes. Directional changes of mandibular landmarks supported a right chewing side preference in the sample. Significant relationship between upper facial skeleton DA and mandible DA was recorded. Differences in subsistence between burial areas and sexes did not translate into differences in mandible DA and dental wear. However, mandibular shape analysis revealed prominence of areas affected by masticatory muscles in individuals from the castle. Higher consumption of tough material, such as meat, has been proposed as possible explanation. The right side was found to be preferential for chewing. The relationship between upper facial skeleton DA and mandible DA was concluded to be the result of the compensatory and adaptive function of mandible. Copyright © 2017 Elsevier Ltd. All rights reserved.

Adaptation of BAp crystal orientation to stress distribution in rat mandible during bone growth

NASA Astrophysics Data System (ADS)

Nakano, T.; Fujitani, W.; Ishimoto, T.; Umakoshi, Y.

2009-05-01

Biological apatite (BAp) c-axis orientation strongly depends on stress distribution in vivo and tends to align along the principal stress direction in bones. Dentulous mandible is subjected to a complicated stress condition in vivo during chewing but few studies have been carried out on the BAp c-axis orientation; so the adaptation of BAp crystal orientation to stress distribution was examined in rat dentulous mandible during bone growth and mastication. Female SD rats 4 to 14 weeks old were prepared, and the bone mineral density (BMD) and BAp crystal orientation were analyzed in a cross-section of mandible across the first molar focusing on two positions: separated from and just under the tooth root on the same cross-section perpendicular to the mesiodistal axis. The degree of BAp orientation was analyzed by a microbeam X-ray diffractometer using Cu-Kα radiation equipped with a detector of curved one-dimensional PSPC and two-dimensional PSPC in the reflection and transmission optics, respectively. BMD quickly increased during bone growth up to 14 weeks, although it was independent of the position from the tooth root. In contrast, BAp crystal orientation strongly depended on the age and the position from the tooth root, even in the same cross-section and direction, especially along the mesiodistal and the biting axes. With increased biting stress during bone growth, the degree of BAp orientation increased along the mesiodistal axis in a position separated from the tooth root more than that near the tooth root. In contrast, BAp preferential alignment clearly appeared along the biting axis near the tooth root. We conclude that BAp orientation rather than BMD sensitively adapts to local stress distribution, especially from the chewing stress in vivo in the mandible.

Can different occlusal positions instantaneously impact spine and body posture? : A pilot study using rasterstereography for a three-dimensional evaluation.

PubMed

März, Karoline; Adler, Werner; Matta, Ragai-Edward; Wolf, Linda; Wichmann, Manfred; Bergauer, Bastian

2017-05-01

Orthodontists influence dental occlusion directly. To suggest any link between dental occlusion and body posture is highly contentious, as evidenced by the literature. Rasterstereography, an optical technique that enables three-dimensional (3D) body measurements to be collected, has not yet been used to impartially examine whether different occlusal positions could instantaneously alter spine and body posture. We therefore set out to use this technique to nonsubjectively evaluate this question under static conditions. Optical body scans were collected for 44 subjects, using the Diers formetric 4D system, for seven different mandible positions. In total, ten spinal and body posture parameters were assessed (trunk inclination, trunk imbalance, pelvic tilt, pelvic torsion, fleche cervicale, fleche lombaire, kyphotic angle, lordotic angle, surface rotation, and lateral deviation) for each mandible position and compared with scans performed with habitual intercuspation (HIC). Significant body posture deviations were found for the fleche cervicale (position of the mandible: right eccentrically), fleche lombaire (positions of the mandible: physiologic rest position, cotton rolls on both sides, bite elevation 1 mm), and the kyphotic angle (positions of the mandible: cotton rolls on both sides, right eccentrically). No other significant differences were detected. Data for the parameters that varied with different dental occlusions generated high standard deviations. Therefore, within the limitations of this pilot study, we could not conclusively associate dental occlusion to an instantaneous impact on the tested parameters. The posture changes that we detected could also have arisen from individual neuromuscular compensation; a possibility that must now be ruled-in, or out, by further research studies with a higher number of subjects.

Use of an intraoperative navigation system for retrieving a broken dental instrument in the mandible: a case report.

PubMed

Sukegawa, Shintaro; Kanno, Takahiro; Shibata, Akane; Matsumoto, Kenichi; Sukegawa-Takahashi, Yuka; Sakaida, Kyosuke; Furuki, Yoshihiko

2017-01-15

A fracture of root canal instruments, with a fractured piece protruding beyond the apex, is a troublesome incident during an endodontic treatment. Locating and retrieving them represents a challenge to maxillofacial surgeons because it is difficult to access due to the proximity between the foreign body and vital structures. Although safe and accurate for surgery, radiographs and electromagnetic devices do not provide a precise three-dimensional position. In contrast, computer-aided navigation provides a correlation between preoperatively collected data and intraoperatively encountered anatomy. However, using a navigation system for mandible treatment is difficult as the mobile nature of the mandible complicates its synchronization with the preoperative imaging data during surgery. This report describes a case of a dental instrument breakage in the mandible during an endodontic treatment for a restorative dental procedure in a 65-year-old Japanese woman. The broken dental instrument was removed using a minimally invasive approach with a surgical navigation system and an interocclusal splint for a stable, identically repeatable positioning of the mandible. Using the three-dimensional position of the navigation probe, a location that best approximated the most anterior extent of the fragment was selected. A minimally invasive vestibular incision was made at this location, a subperiosteal reflection was performed, and the foreign body location was confirmed using a careful navigation system. The instrument was carefully visualized and extruded from the apical to the tooth crown side and was then removed using mosquito forceps through the medullary cavity of the crown side of the tooth. Follow-up was uneventful; her clinical course was good. The use of a surgical navigation system together with an interocclusal splint enabled the retrieval of a broken dental instrument in a safe and minimally invasive manner without damaging the surrounding vital structures.

Exploring Biological and Geological Age-related Changes through Variations in Intra- and Intertooth Proteomes of Ancient Dentine.

PubMed

Procopio, Noemi; Chamberlain, Andrew T; Buckley, Michael

2018-03-02

Proteomic analyses are becoming more widely used in archeology not only due to the greater preservation of proteins in ancient specimens than DNA but also because they can offer different information, particularly relating to compositional preservation and potentially a means to estimate biological and geological age. However, it remains unclear to what extent different burial environments impact these aspects of proteome decay. Teeth have to date been much less studied than bone but are ideal to explore how proteins decay with time due to the negligible turnover that occurs in dentine relative to bone. We investigated the proteome variability and deamidation levels of different sections of molar teeth from archeological bovine mandibles as well as their mandibular bone. We obtained a greater yield of proteins from the crown of the teeth but did not find differences between the different molars analyzed within each mandible. We also obtained the best variety of protein from a well-preserved mandible that was not the youngest one in terms of chronological age, showing the influence of the preservation conditions on the final proteomic outcome. Intriguingly, we also noticed an increase in abundance levels of fetuin-A in biologically younger mandibles as reported previously, but the opposite trend in tooth dentine. Interestingly, we observed higher glutamine deamidation levels in teeth from the geologically oldest mandible despite it being the biologically youngest specimen, showing that the archeological age strongly impacts on the level of deamidations observed, much more so than biological aging. This indicates that the glutamine deamidation ratio of selected peptides may act as a good predictor of the relative geochronological age of archeological specimens.

Computer-assisted resection and reconstruction of bilateral osteoradionecrosis of the mandible using 2 separate flaps prepared from a single fibula.

PubMed

Chen, Rui; Zhang, Han-Qing; Huang, Zi-Xian; Li, Shi-Hao; Zhang, Da-Ming; Huang, Zhi-Quan

2018-03-07

Osteoradionecrosis of the mandible is a late radiation-induced complication, which is a major concern in survivors of head and neck cancer. In this study, we present a case of a patient with nasopharyngeal carcinoma who developed extensive bilateral osteoradionecrosis of the ascending ramus of the mandible. After preoperative virtual surgical planning, the obtained data were used to fabricate patient-specific cutting templates. The bilateral mandibular defects were reconstructed using 2 separate flaps prepared from a single fibula. Both defects were successfully reconstructed, and satisfactory aesthetic and functional results were achieved. Bilateral mandibular osteoradionecrosis can be managed with virtual surgical planning, and the defects can be reconstructed using 2 separate flaps prepared from a single fibula. Copyright © 2018 Elsevier Inc. All rights reserved.

Mandible shape and dwarfism in squirrels (Mammalia, Rodentia): interaction of allometry and adaptation

NASA Astrophysics Data System (ADS)

Hautier, Lionel; Fabre, Pierre-Henri; Michaux, Jacques

2009-06-01

Squirrels include several independent lineages of dwarf forms distributed into two ecological groups: the dwarf tree and flying squirrels. The mandible of dwarf tree squirrels share a highly reduced coronoid process and a condylar process drawn backwards. Dwarf flying squirrels on the other hand, have an elongated coronoid process and a well-differentiated condylar process. To interpret such a difference, Elliptic Fourier Transform was used to evaluate how mandible shape varies with dwarfism in sciurids. The results obtained show that this clear-cut difference cannot be explained by a simple allometric relationship in relation with size decrease. We concluded that the retention of anteriorly positioned eye sockets, in relation with distance estimation, allowed the conservation of a well-differentiated coronoid process in all flying species, despite the trend towards its reduction observed among sciurids as their size decreases.

Mucormycosis of Mandible with Unfavorable Outcome

PubMed Central

Oswal, Nitin Prakash; Gadre, Pushkar Kiran; Sathe, Prachee; Gadre, Kiran Shrikrishna

2012-01-01

Mucormycosis is a fulminant fungal infection that occurs most often in diabetic and immunocompromised individuals. Our patient, with uncontrolled diabetes mellitus and multiple systemic disorders, developed postextraction mucormycosis of mandible, an extremely rare complication. An initial clinical and radiographic diagnosis of mandibular osteomyelitis was made and the lesion was treated medically and surgically with curettage and saucerisation. The specimen was sent for histopathological evaluation, which showed necrotic area containing broad aseptate fungal hyphae with right angle branching consistent with mucormycosis. The patient succumbed to multipleorgan failure secondary to septicemia. The disease is usually fatal with a poor survival rate; there is still paucity of literature on the definitive management of this disease involving the mandible. This paper emphasizes the need for correction of underlying immunodeficiency and early diagnosis with aggressive multimodality treatment approach to offer the best chance of survival. PMID:22779014

Mucormycosis of mandible with unfavorable outcome.

PubMed

Oswal, Nitin Prakash; Gadre, Pushkar Kiran; Sathe, Prachee; Gadre, Kiran Shrikrishna

2012-01-01

Mucormycosis is a fulminant fungal infection that occurs most often in diabetic and immunocompromised individuals. Our patient, with uncontrolled diabetes mellitus and multiple systemic disorders, developed postextraction mucormycosis of mandible, an extremely rare complication. An initial clinical and radiographic diagnosis of mandibular osteomyelitis was made and the lesion was treated medically and surgically with curettage and saucerisation. The specimen was sent for histopathological evaluation, which showed necrotic area containing broad aseptate fungal hyphae with right angle branching consistent with mucormycosis. The patient succumbed to multipleorgan failure secondary to septicemia. The disease is usually fatal with a poor survival rate; there is still paucity of literature on the definitive management of this disease involving the mandible. This paper emphasizes the need for correction of underlying immunodeficiency and early diagnosis with aggressive multimodality treatment approach to offer the best chance of survival.

A case of Sotos syndrome treated with distraction osteogenesis in maxilla and mandible.

PubMed

Takano, Masayuki; Kasahara, Kiyohiro; Ogawa, Chiharu; Katada, Hidenori; Sueishi, Kenji

2012-01-01

Sotos syndrome is inherited in an autosomal-dominant manner and is characterized by increased birth weight, excessive growth, advanced bone age, and distinctive facial features, including dolichocephaly, hypertelorism, and a prominent mandible. We treated a jaw deformity due to Sotos syndrome consisting of malocclusion due to a narrow maxillary dental arch and mandibular retrusion from hypoplasia of the rami. The patient was a 17-year-old man. Malocclusion due to a narrow maxillary dental arch and mandibular retrusion was diagnosed. Rapid maxillary expansion with Lines corticotomy and mandibular advancement with distraction osteogenesis were performed. The maxilla was expanded laterally a total of 3 mm and the mandible prolonged 12 mm in the posterior area of the mandibular body. Subsequently, orthodontic treatment was continued. At present, 5 years after surgery, occlusion remains good and stable.

Andy Gump Fracture of the Mandible in a Pediatric Patient.

PubMed

Mulinari-Santos, Gabriel; Lima, Valthierre Nunes; Palacio-Muñoz, Xiomara Mónica Johanna; Oliva, André Hergesel de; Momesso, Gustavo Antonio Correa; Polo, Tárik Ocon Braga; Souza, Francisley Ávila; Garcia-Júnior, Idelmo Rangel; Faverani, Leonardo Perez

2017-10-01

The mandibular fractures in pediatric patients are rare, and they can need a fast and safe treatment. We present a case of a pediatric patient with "Andy Gump" fracture, resulting in a retrognathic mandible, distress to breathe, and functional discomfort to the patient caused by a cycling accident. The treatment was successful with the fast release of airway path and use of titanium plates to fix the fracture.

Irradiation autogenous mandibular grafts in primary reconstructions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamaker, R.C.

1981-07-01

The procedure, irradiated mandibular autografts, for primary reconstruction, is presented with an immediate success rate of 88%. Eight cases have undergone primary mandibular reconstruction with the tumorous mandible irradiated to 10,000 rads in a single dose. The longest follow-up is 2 3/4 years. The autograft has proven to be an ideal implant. Major resections of the mandible in conjunction with large myocutaneous flaps have been reconstructed utilizing this implant.

Titanium Mesh Shaping and Fixation for the Treatment of Comminuted Mandibular Fractures.

PubMed

Dai, Jiewen; Shen, Guofang; Yuan, Hao; Zhang, Wenbin; Shen, Shunyao; Shi, Jun

2016-02-01

Treating comminuted mandibular fractures remains a challenge. In this study, we used titanium mesh to treat comminuted mandibular fractures. Nine patients with traumatically comminuted mandibular fractures who received open reduction and internal stable fixation with titanium mesh were retrospectively reviewed. Open reduction-internal stable fixation was performed 7 to 10 days after primary debridement of the facial trauma. After the fractured mandible and the displaced fragments were reduced, the titanium mesh was reshaped according to the morphology of the mandible, and the reduced bone fragments were fixed with the reshaped titanium mesh and screws. Then, the surgical effects were evaluated during routine follow-up. Most of the displaced fragments were preserved and exhibited a favorable shaping ability in restoring the morphology of the mandible during surgery. No intraoperative complications were encountered. In addition, all patients were infection free, with no obvious resorption in the fixed fragments after surgery. The mandible also exhibited favorable morphology and offered sufficient bone mass for dental implantation or a denture prosthesis. We conclude that titanium mesh shaping and fixation can effectively treat comminuted mandibular fractures with little bone fragment loss, little soft tissue exposure, a low infection rate, and favorable mandibular morphology. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Use of mini dental implants in ectodermal dysplasia children: follow-up of three cases.

PubMed

Sfeir, E; Nassif, N; Moukarzel, C

2014-07-01

Ectodermal dysplasia is a hereditary genodermatosis characterised by a congenital defect of ectodermal structures, causing tooth malformations and anomalies. Implantology has become accepted in these subjects. However cases are often complicated by a reduction in the size of the alveolar process, making the insertion of conventional implants difficult without bone grafting. The reduced diameter of mini-implants and their ease of insertion provide an interesting solution in supporting removable or fixed prosthesis. The purpose of this paper is to report the follow-up of three cases of children (11-12 year- old) with ectodermal dysplasia in which mini-implants were used to support the prostheses. In the first case, two mini-implants were inserted into the anterior part of the mandible for stabilising a removable denture (2 years follow-up). In the other two cases, mini- implants were inserted in the maxilla and mandible to replace missing front teeth with fixed prostheses. Patients were called for follow- up every 6 months: in the sencod case follow-up lasted 4 years in the mandible and 2 years in the maxilla; in the third case, 2 years in the maxilla and 1 year in the mandible. The use of mini-implants in children with ectodermal dysplasia can enhance aesthetics, and functional and psychosocial development.

Occurrence of the Retromolar Foramen in Dry Mandibles of South-Eastern Part of India: A Morphological Study with Review of the Literature

PubMed Central

Potu, Bhagath Kumar; Kumar, Vinod; Salem, Abdel-Halim; Abu-Hijleh, Marwan

2014-01-01

The retromolar foramen (RMF) is a rare anatomical structure situated in the retromolar fossa behind the third molar tooth. When it is present, the foramen is connected with the mandibular canal and is believed to transmit neurovascular structures that provide accessory source to the mandibular molars and the buccal area. Reports from the literature show that the presence of RMF could pose a challenge in complete blockage of the inferior alveolar nerve during mandibular surgeries. We report the incidence of retromolar foramen from ninety-four dry mandibles of south-eastern part of Karnataka State, India. The foramen was observed in 11 mandibles out of 94 included in the study (11.7%). In three mandibles, the foramen was present bilaterally (3.2%) and in three it was on the left side (3.2%) and in five it was on the right side (5.3%). For the first time, we also measured the dimensions of the retromolar area and distance of the foramen from third molar tooth to understand its risks during the surgical extraction of the lower third molar tooth. A thorough review of the literature has also been done to compare the present findings with the studies reported from the various populations. PMID:25489487

Implant-supported rehabilitation after treatment of atrophic mandibular fractures: report of two cases.

PubMed

Oliveira, Leandro Benetti de; Gabrielli, Marisa Aparecida Cabrini; Gabrielli, Mario Francisco Real; Pereira-Filho, Valfrido Antonio Pereira

2015-12-01

The objective of this article is to present options of rehabilitation with dental implants in two cases of severely atrophic mandibles (<10 mm) after rigid internal fixation of fractures. Two patients who sustained fractures in severely atrophic mandibles with less than 10 mm of bone height were treated by open reduction and internal fixation through a transcervical access. Internal fixation was obtained with 2.4-mm locking reconstruction plates. The first patient presented satisfactory bone height at the area between the mental foramens and after 2 years, received flapless guided implants in the anterior mandible and an immediate protocol prosthesis. The second patient received a tent pole iliac crest autogenous graft after 2 years of fracture treatment and immediate implants. After 5 months, a protocol prosthesis was installed in the second patient. In both cases, the internal fixation followed AO principles for load-bearing osteosynthesis. Both prosthetic devices were Branemark protocol prosthesis. The mandibular reconstruction plates were not removed. Both patients are rehabilitated without complications and satisfied with esthetic and functional results. With the current techniques of internal fixation, grafting, and guided implants, the treatment of atrophic mandible fractures can achieve very good results, which were previously not possible.

Mood-induced variations of mandible and tongue postures.

PubMed

Bourdiol, P; Mishellany-Dutour, A; Peyron, M-A; Woda, A

2013-06-01

Twelve young adults in a good general health were observed during habitual posture of tongue and jaw in different emotional conditions induced by watching three video sequences. The position of the mandible was tracked by the displacements of an electromagnetic sensor glued to the chin. The tongue-to-palate distance was obtained by 2-D location of three electromagnetic sensors placed on the tongue upper midline surface. Head displacements were evaluated with a sensor fixed to an upper central incisor and were subtracted from corresponding displacements of tongue and chin sensors to obtain the real tongue and mandible positions during continuous recording sequences. Emotional conditioning by a fear movie influenced the vertical position of the mandible: the mean interarch distances during the fear movie (2·34 ± 0·24 mm) were significantly different from those measured during the tender (3·13 ± 0·35) and neutral (3·42 ± 0·80) movies, respectively (anova repeated measure, SNK; P < 0·05). anova repeated measure indicated that the tongue-to-palate distance differed significantly when the subjects were watching the conditioning movies (P = 0·003), the tip of the tongue taking a lower position during the fear movie than during the tender and neutral movies. © 2013 John Wiley & Sons Ltd.

Dental application of novel finite element analysis software for three-dimensional finite element modeling of a dentulous mandible from its computed tomography images.

PubMed

Nakamura, Keiko; Tajima, Kiyoshi; Chen, Ker-Kong; Nagamatsu, Yuki; Kakigawa, Hiroshi; Masumi, Shin-ich

2013-12-01

This study focused on the application of novel finite-element analysis software for constructing a finite-element model from the computed tomography data of a human dentulous mandible. The finite-element model is necessary for evaluating the mechanical response of the alveolar part of the mandible, resulting from occlusal force applied to the teeth during biting. Commercially available patient-specific general computed tomography-based finite-element analysis software was solely applied to the finite-element analysis for the extraction of computed tomography data. The mandibular bone with teeth was extracted from the original images. Both the enamel and the dentin were extracted after image processing, and the periodontal ligament was created from the segmented dentin. The constructed finite-element model was reasonably accurate using a total of 234,644 nodes and 1,268,784 tetrahedral and 40,665 shell elements. The elastic moduli of the heterogeneous mandibular bone were determined from the bone density data of the computed tomography images. The results suggested that the software applied in this study is both useful and powerful for creating a more accurate three-dimensional finite-element model of a dentulous mandible from the computed tomography data without the need for any other software.

Prediction of age and gender using digital radiographic method: A retrospective study.

PubMed

Poongodi, V; Kanmani, R; Anandi, M S; Krithika, C L; Kannan, A; Raghuram, P H

2015-08-01

To investigate age, sex based on gonial angle, width and breadth of the ramus of the mandible by digital orthopantomograph. A total of 200 panoramic radiographic images were selected. The age of the individuals ranged between 4 and 75 years of both the gender - males (113) and females (87) and selected radiographic images were measured using KLONK image measurement software tool with linear, angular measurement. The investigated radiographs were collected from the records of SRM Dental College, Department of Oral Medicine and Radiology. Radiographs with any pathology, facial deformities, if no observation of mental foramen, congenital deformities, magnification, and distortion were excluded. Mean, median, standard deviation, derived to check the first and third quartile, linear regression is used to check age and gender correlation with angle of mandible, height and width of the ramus of mandible. The radiographic method is a simpler and cost-effective method of age identification compared with histological and biochemical methods. Mandible is strongest facial bone after the skull, pelvic bone. It is validatory to predict age and gender by many previous studies. Radiographic and tomographic images have become an essential aid for human identification in forensic dentistry forensic dentists can choose the most appropriate one since the validity of age and gender estimation crucially depends on the method used and its proper application.

Vertical augmentation of the posterior atrophic mandible by interpositional grafts in a split-mouth design: a human tomography evaluation pilot study.

PubMed

Domingues, Eduardo Pinheiro; Ribeiro, Rafael Fernandes; Horta, Martinho Campolina Rebello; Manzi, Flávio Ricardo; Côsso, Maurício Greco; Zenóbio, Elton Gonçalves

2017-10-01

Using computed tomography, to compare vertical and volumetric bone augmentation after interposition grafting with bovine bone mineral matrix (GEISTLICH BIO-OSS ® ) or hydroxyapatite/tricalcium phosphate (STRAUMANN ® BONECERAMIC) for atrophic posterior mandible reconstruction through segmental osteotomy. Seven patients received interposition grafts in the posterior mandible for implant rehabilitation. The computed tomography cone beam images were analysed with OsiriX Imaging Software 6.5 (Pixmeo Geneva, Switzerland) in the pre-surgical period (T0), at 15 days post-surgery (T1) and at 180 days post-surgery (T2). The tomographic analysis was performed by a single trained and calibrated radiologist. Descriptive statistics and nonparametric methods were used to analyse the data. There was a significant difference in vertical and volume augmentation with both biomaterials using the technique (P < 0.05). There were no significant differences (P > 0.05) in volume change of the graft, bone volume augmentation, or augmentation of the maximum linear vertical distance between the two analysed biomaterials. The GEISTLICH BIO-OSS ® and STRAUMANN ® BONECERAMIC interposition grafts exhibited similar and sufficient dimensional stability and volume gain for short implants in the atrophic posterior mandible. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Biting and chewing in overdentures, full dentures, and natural dentitions.

PubMed

Fontijn-Tekamp, F A; Slagter, A P; Van Der Bilt, A; Van 'T Hof, M A; Witter, D J; Kalk, W; Jansen, J A

2000-07-01

It has been suggested that the provision of dental implants can improve the oral function of subjects with severely resorbed mandibles, possibly restoring function to the level experienced by satisfied wearers of conventional complete dentures. Nevertheless, a quantitative comparison has never been made and can be drawn from the literature only with difficulty, since studies differ greatly in methodology. To make such a comparison, we measured bite force and chewing efficiency by using identical methods in subjects with overdentures, complete full dentures, and natural dentitions. Our results indicated that bite forces achieved with overdentures on dental implants were between those achieved with artificial and natural dentitions. Chewing efficiency was significantly greater than that of subjects with full dentures (low mandible), but was still lower than that of subjects with full dentures (high mandible) and overdentures on bare roots. Differences in the height of the mandible revealed significant differences in chewing efficiency between the two full-denture groups. Furthermore, subjects with a shortened dental arch exerted bite forces similar to those of subjects with a complete-natural dentition, but their chewing efficiency was limited due to the reduced occlusal area. For all groups combined, a significant correlation was found between maximum bite force and chewing efficiency. Nearly half of the variation in chewing efficiency was explained by bite force alone.

Chewing efficiency and maximum bite force with different attachment systems of implant overdentures: a crossover study.

PubMed

Elsyad, Moustafa Abdou; Khairallah, Ahmed Samir

2017-06-01

This crossover study aimed to evaluate and compare chewing efficiency and maximum bite force (MBF) with resilient telescopic and bar attachment systems of implant overdentures in patients with atrophied mandibles. Ten participants with severely resorbed mandibles and persistent denture problems received new maxillary and mandibular conventional dentures (control, CD). After 3 months of adaptation, two implants were inserted in canine region of the mandible. In a quasi-random method, overdentures were connected to the implants with either bar overdentures (BOD) or resilient telescopic overdentures (TOD) attachment systems. Chewing efficiency in terms of unmixed fraction (UF) was measured using chewing gum (after 5, 10, 20, 30 and 50 strokes), and MBF was measured using a bite force transducer. Measurements were performed 3 months after using each of the following prostheses: CD, BOD and TOD. Chewing efficiency and MBF increased significantly with BOD and TOD compared to CD. As the number of chewing cycles increased, the UF decreased. TOD recorded significant higher chewing efficiency and MBF than BOD. Resilient telescopic attachments are associated with increased chewing efficiency and MBF compared bar attachments when used to retain overdentures to the implants in patients with atrophied mandibles. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Chewing on the trees: Constraints and adaptation in the evolution of the primate mandible.

PubMed

Meloro, Carlo; Cáceres, Nilton Carlos; Carotenuto, Francesco; Sponchiado, Jonas; Melo, Geruza Leal; Passaro, Federico; Raia, Pasquale

2015-07-01

Chewing on different food types is a demanding biological function. The classic assumption in studying the shape of feeding apparatuses is that animals are what they eat, meaning that adaptation to different food items accounts for most of their interspecific variation. Yet, a growing body of evidence points against this concept. We use the primate mandible as a model structure to investigate the complex interplay among shape, size, diet, and phylogeny. We find a weak but significant impact of diet on mandible shape variation in primates as a whole but not in anthropoids and catarrhines as tested in isolation. These clades mainly exhibit allometric shape changes, which are unrelated to diet. Diet is an important factor in the diversification of strepsirrhines and platyrrhines and a phylogenetic signal is detected in all primate clades. Peaks in morphological disparity occur during the Oligocene (between 37 and 25 Ma) supporting the notion that an adaptive radiation characterized the evolution of South American monkeys. In all primate clades, the evolution of mandible size is faster than its shape pointing to a strong effect of allometry on ecomorphological diversification in this group. © 2015 The Author(s). Evolution © 2015 The Society for the Study of Evolution.

Tessier Number 30 Median Mandibular Cleft With Congenital Heart Anomalies in Qena, Egypt.

PubMed

Ali, Ahmed Ali Abdelrahim

2018-01-01

Median cleft deformities of the lower lip and mandible are very rare congenital anomalies. Our patient had median cleft of the lower lip, mandible, and the chin with tongue duplication, ankyloglossia, and cleft strap muscles with 2 neck contracture bands. This anomaly was associated with congenital heart disease transposition of great vessels, large ventricular septal defect, and severe pulmonary stenosis. Early repair was done at 6 months to improve feeding.

Bifid condyle of the mandible with associated polythelia and manual anomalies.

PubMed

Zohar, Y; Laurian, N

1987-12-01

Syndromes of oro-mandibular-skeletal anomalies are confusing by their ambiguous and overlapping components. It is our purpose to bring attention to a case comprising a group of anomalies: bifid mandibular condyle, asymmetric contralateral ascending ramus of the mandible, supernumerary nipples (polythelia), supernumerary-rudimentary postaxial sixth fingers and clinodactyly. The associated malformations presented do not correspond to any previous report. The case may therefore represent a new malformation syndrome.

[3-D analysis obtained in mandible movements in children 7-15 years old with different types of occlusion].

PubMed

Matveev, V M; Dzaraev, Ch R; Persin, L S

2007-01-01

60 children with different types occlusion--normal, distal, mesial and transverse between the ages 7-15 years were selected. Using unique computer software programme and 3D digitizer MicroScribe-G2 (Company Immersion, USA) on the articulator with mounted casts, persuaded measuring the scores in different movements of mandible habitual occlusion, maximum forward movement and maximum lateral movements. Scores were calculated and results interpreted.

Experiment K-310: The effect of spaceflight on osteogenesis and dentinogenesis in the mandibles of rats

NASA Technical Reports Server (NTRS)

Simmons, D. J.; Russell, J. E.; Winter, F.; Rosenberg, G. D.; Walker, W. V.

1981-01-01

Normal rates of dentinogenesis and osteogenesis in the body of the mandible were observed. The total calcium, inorganic phosphorus and hydroxyproline levels in the jaws and incisors of the flight rats were normal. Gravity density fractionation studies suggested, however, that spaceflight caused a delay in the normal maturation of bone mineral and matrix; normal values were reestablished by 6 days postflight. The teeth were spared. The circadian and ultradian patterns of dentin calcification were normal during spaceflight and recovery periods, but the enamel rhythms displayed a greater amplitude of sulfur concentrations and this abnormal calcium to sulfur ratios only during exposure to zero gravity. The rat mandible and teeth do not suffer the deficits of bone formation common to weight bearing parts of the skeleton during spaceflight. The only derangements detected were in the quality of the matrix and mineral moieties.

Rotational Distraction for the Treatment of Severe Mandibular Retrognathia

PubMed Central

Mitsugi, Masaharu; Alcalde, Rafael E.; Yano, Tomoyuki; Uemura, Noriko; Okazaki, Mutsumi

2015-01-01

Backgrounds: The main problem with intraoral distraction of the mandible is the inability to achieve the three-dimensional mandibular correction as planned preoperatively. We developed a technique that allows spontaneous changes in the direction of mandibular elongation using an intraoral distractor. Methods: After mandibular osteotomy, the distractor is fixed to the distal segment of the mandible using a single bicortical screw, allowing anterior-posterior, vertical and limited lateromedial changes in the vector of distraction. Mandibular lengthening is performed while keeping the maxilla and mandible in class I occlusion with intermaxillary fixation. Results: As the distraction device is activated allowing mandibular elongation, the proximal segment, guided by the surrounding soft tissues, moves and rotates posterosuperiorly. Mandibular lengthening is continued until the condylar head reaches an adequate position in the mandibular fossa as confirmed clinically and radiographically. Conclusion Thirty-three patients with mandibular retrognathia received this treatment and good results were obtained. PMID:26301156

Rotational Distraction for the Treatment of Severe Mandibular Retrognathia.

PubMed

Ito, Osamu; Mitsugi, Masaharu; Alcalde, Rafael E; Yano, Tomoyuki; Uemura, Noriko; Okazaki, Mutsumi

2015-07-01

The main problem with intraoral distraction of the mandible is the inability to achieve the three-dimensional mandibular correction as planned preoperatively. We developed a technique that allows spontaneous changes in the direction of mandibular elongation using an intraoral distractor. After mandibular osteotomy, the distractor is fixed to the distal segment of the mandible using a single bicortical screw, allowing anterior-posterior, vertical and limited lateromedial changes in the vector of distraction. Mandibular lengthening is performed while keeping the maxilla and mandible in class I occlusion with intermaxillary fixation. As the distraction device is activated allowing mandibular elongation, the proximal segment, guided by the surrounding soft tissues, moves and rotates posterosuperiorly. Mandibular lengthening is continued until the condylar head reaches an adequate position in the mandibular fossa as confirmed clinically and radiographically. Thirty-three patients with mandibular retrognathia received this treatment and good results were obtained.

Solitary plasmacytoma of the mandible - a rare entity.

PubMed

Baad, Rajendra; Kapse, Sonam C; Rathod, Nanita; Sonawane, Kishor; Thete, Sanjay Gangadhar; Kumar, M Naveen

2013-06-01

Plasma cell dyscrasias (multiple myeloma, solitary plasmocytoma of bone and extra medullary plasmocytoma) are cha¬racterized by a monoclonal neoplastic proliferation of plasma cells of which Solitary plasmocytoma of bone (SPB) is a localized form. SPB is most frequently seen in vertebrae and secondarily in long bones. Its presence in jaws is extremely rare. The malignant plasma cells express monotypic cytoplasmic immunoglobulins and plasma cell-associated antigens, with an absence of immature B-cell antigens. Here we report a unique case of plasmacytoma in the right side of mandible, a chronology for diagnosis of the lesion is also reviewed along with clinical, radiographic, histopathological and immunohistochemical evidence. How to cite this article: Baad R, Kapse S C, Rathod N, Sonawane K, Thete S G, Naveen M K. Solitary Plasmacytoma of the Mandible - A Rare Entity. J Int Oral Health 2013; 5(3):97-101.

Coexistence of salivary gland cysticercosis with squamous cell carcinoma of the mandible.

PubMed

Mahajan, Dipti; Khurana, Nita; Setia, Namrata

2007-03-01

Cysticercosis is a parasitic infestation caused by the pork tapeworm larval stage, Cysticercus cellulosae. The majority of the cases present in ocular, cerebral, and subcutaneous locations. We report the presence of cysticercosis inside the submandibular gland in association with squamous cell carcinoma of the inferior alveolar ramus of the mandible. To the best of our knowledge, this is the first case report documenting cysticercosis inside a salivary gland. A 65-year-old male presented with complaints of an ulcerative lesion on the inferior alveolar ramus present for 2 months. Histological examination revealed a keratinizing well-differentiated squamous cell carcinoma involving the alveolar margin and mandible. The histopathological examination of the submandibular gland revealed cysticercosis. This case emphasizes the importance of adequate sampling of all the tissues obtained for associated infectious disorders, more so in immunosuppressed patients, which will help the clinician to manage the case appropriately.

Variant facial artery in the submandibular region.

PubMed

Vadgaonkar, Rajanigandha; Rai, Rajalakshmi; Prabhu, Latha V; Bv, Murlimanju; Samapriya, Neha

2012-07-01

Facial artery has been considered to be the most important vascular pedicle in facial rejuvenation procedures and submandibular gland (SMG) resection. It usually arises from the external carotid artery and passes from the carotid to digastric triangle, deep to the posterior belly of digastric muscle, and lodges in a groove at the posterior end of the SMG. It then passes between SMG and the mandible to reach the face after winding around the base of the mandible. During a routine dissection, in a 62-year-old female cadaver, in Kasturba Medical College Mangalore, an unusual pattern in the cervical course of facial artery was revealed. The right facial artery was found to pierce the whole substance of the SMG before winding around the lower border of the mandible to enter the facial region. Awareness of existence of such a variant and its comparison to the normal anatomy will be useful to oral and maxillofacial surgeons.

Skeletal anchorage for intrusion of bimaxillary molars in a patient with skeletal open bite and temporomandibular disorders

PubMed Central

Iwasa, Akihiko; Horiuchi, Shinya; Kinouchi, Nao; Izawa, Takashi; Hiasa, Masahiro; Kawai, Nobuhiko; Yasue, Akihiro; Hassan, Ali H.; Tanaka, Eiji

2017-01-01

The treatment of severe skeletal anterior open bite is extremely difficult in adults, and orthognathic surgery is generally selected for its treatment. We report the case of an 18-year-old adult patient with skeletal anterior open bite and temporomandibular disorders who was successfully treated using temporary anchorage devices. She had an open bite of −2.0 mm and an increased facial height. Miniplates were implanted in both the maxilla and mandible, and molar intrusion resulted in counterclockwise rotation of the mandible over a period of 12 months. After active treatment, her upper and lower first molars were intruded by approximately 2 mm and her overbite became +2.5 mm. Her retrognathic profile improved with counterclockwise rotation of the mandible. Orthodontic treatment aided with skeletal anchorage is beneficial for intrusion of bimaxillary molars in patients with anterior open bite. PMID:29119097

Cemento-ossifying fibroma of the mandible.

PubMed

Trijolet, J-P; Parmentier, J; Sury, F; Goga, D; Mejean, N; Laure, B

2011-01-01

Cemento-ossifying fibroma is a rare benign tumor most often discovered incidentally. A 72-year-old patient was referred for a subclinical lesion of the mandible. The orthopantomogram showed a well-circumscribed radiolucent osteolytic image, 1 cm in diameter, on the mandibular angle. On CT, the single lesion had a tissue aspect with a peripheral halo without enhancement after contrast injection. A cortical lacuna on the lingual side was noted. Surgical enucleation of the lesion was performed. The pathological examination confirmed the ossifying fibroma. Slow and progressive, cemento-ossifying fibroma is a rare benign tumor that reaches the maxilla and more frequently the mandible. The ossifying and cementifying fibromas are differentiated by their clinical, radiological, and histological findings. The authors discuss the pathogenesis and radiological signs guiding the choice of diagnostic and therapeutic methods. The treatment is surgical with an enucleation or wider resection with bone reconstruction for large fibromas. Copyright © 2010. Published by Elsevier Masson SAS.

Multifocal tenosynovial giant cell tumors in a child with Noonan syndrome.

PubMed

Meyers, Arthur B; Awomolo, Agboola O; Szabo, Sara

2017-03-01

Noonan syndrome is a genetic disorder with variable expression of distinctive facial features, webbed neck, chest deformity, short stature, cryptorchidism and congenital heart disease. The association of Noonan syndrome and giant cell granulomas of the mandible is widely reported. However, Noonan syndrome may also be associated with single or multifocal tenosynovial giant cell tumors, also referred to as pigmented villonodular synovitis. We report a child with Noonan syndrome, giant cell granulomas of the mandible and synovial and tenosynovial giant cell tumors involving multiple joints and tendon sheaths who was initially misdiagnosed with juvenile idiopathic arthritis. It is important for radiologists to be aware of the association of Noonan syndrome and multifocal giant cell lesions, which can range from the more commonly described giant cell granulomas of the mandible to isolated or multifocal intra- or extra-articular tenosynovial giant cell tumors or a combination of all of these lesions.

Biomechanical implications of cortical elastic properties of the macaque mandible.

PubMed

Dechow, Paul C; Panagiotopoulou, Olga; Gharpure, Poorva

2017-10-01

Knowledge of the variation in the elastic properties of mandibular cortical bone is essential for modeling bone function. Our aim was to characterize the elastic properties of rhesus macaque mandibular cortical bone and compare these to the elastic properties from mandibles of dentate humans and baboons. Thirty cylindrical samples were harvested from each of six adult female rhesus monkey mandibles. Assuming orthotropy, axes of maximum stiffness in the plane of the cortical plate were derived from ultrasound velocity measurements. Further velocity measurements with longitudinal and transverse ultrasonic transducers along with measurements of bone density were used to compute three-dimensional cortical elastic properties using equations based on Hooke's law. Results showed regional variations in the elastic properties of macaque mandibular cortical bone that have both similarities and differences with that of humans and baboons. So far, the biological and structural basis of these differences is poorly understood. Copyright © 2017 Elsevier GmbH. All rights reserved.

Endodontic management of horizontally placed molars after gunshot injury to mandible: a case report.

PubMed

Nawal, Ruchika Roongta; Sehgal, Ritu; Ansari, Irfan; Talwar, Sangeeta; Sood, Abhinav; Verma, Mahesh

2009-11-01

A 37-year-old man reported to our department with the history of gunshot injury to the mandible 15 years before. His anterior mandible had been resected earlier and bone graft was seen. Intraoral examination of lower jaw revealed 4 remaining mandibular molars. These teeth were severely rotated such that they lay horizontal with respect to the mandibular base. Preoperative Dentascan spiral computerized tomography (CT) of the patient revealed obliteration of the mesial canals of the mandibular right first molar and pear-shaped internal resorption defect in the distal canal of the same tooth. This paper reports the challenging endodontic management of a rare case of severely angulated teeth also exhibiting traumatic sequelae in both roots of the impact tooth. It also highlights the usefulness of spiral CT scan in diagnosis of traumatic sequelae such as pulp canal obliteration and internal resorption.

The modular endoprosthesis for mandibular body replacement. Part 2: finite element analysis of endoprosthesis reconstruction of the mandible.

PubMed

Wong, Raymond C W; Tideman, Henk; Merkx, Matthias A W; Jansen, John; Goh, Suk Ming

2012-12-01

Problems with loosening of the modules for the modular endoprosthesis were encountered in animal studies for mandibular body replacement. We performed a finite element analysis to look at the stress distribution and areas of stress concentration in a human sized mandible. Variations were made to the stem and defect length to look at how the forces changed. The hypothesis was: (1) reconstruction with a modular endoprosthesis did not lead to areas of stress concentration beyond the material strength of cortical bone and titanium alloy; (2) changes in dimensions of the endoprosthesis did not cause a corresponding linear increase to the stresses. The endoprosthesis was modelled to create a male, female part with stems and a connection screw (Case I). The stem length was halved (Case II) and defect length doubled (Case III). Geometric data of a human sized mandible were obtained, a continuity defect created digitally at the right molar area and the models combined. Boundary conditions were set and the model loaded to get a bite force of 300 N at the incisor region. An intact mandible was used as a control. The right side of the reconstructed mandible became less rigid and flexed more. The highest stresses were within the endoprosthesis at two areas of stress concentration: (1) shear stress at the superior surface of the stems close to the junction of the stem and the module body; (2) compressive stresses at the bottom bevel of the dove-tailed connection. The stress distribution for Case I and II did not differ much except for the magnitude which was slightly higher for Case II. There was a tendency for outward bending at the module connection for Case III which potentially might cause loosening of the module connection. Displacements of the mandible were less than 1 mm throughout. The endoprosthesis with its present dimensions would be expected to perform adequately at a bite force of 300 N. An increase in defect length caused a tendency for bending at the stem and the module connection. With a decrease in stem length, there were little differences except a slight increase in magnitude. Copyright © 2012 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Mandibular fracture caused by periodontal abscess: Radiological, US, CT and MRI findings.

PubMed

Mazza, D; Marini, M; Tesei, J; Primicerio, P

2006-09-01

Mandibular fracture is a rare but possible outcome of a periodontal abscess. A case of complete fracture of the mandible with abscess infiltrating the surrounding soft tissues is described. The patient reported nor trauma, nor locoregional surgery. Ultrasonography and orthopantomography revealed the fracture of the mandible and the abscess at the masseter muscle. Further preoperative diagnostic examinations included CT and MRI. CT revealed the complete fracture line more clearly; MR the extension of the abscess.

Primary intraosseous squamous cell carcinoma of the mandible arising de novo.

PubMed

Shamim, Thorakkal

2009-07-01

Primary intraosseous squamous cell carcinoma is an odontogenic tumour with aggressive behaviour usually noticed in 6th to 7th decades of life. The tumour is characterized by progressive swelling of the jaw, pain and loosening of teeth. Microscopically, the lesion is showing foci of keratinising cells separated by collagenous connective tissue stroma. A case of primary intraosseous squamous cell carcinoma of mandible arising de novo in a 40-year-old man is reported.

Les restes humains néandertaliens immatures de la couche 4A de la grotte Scladina (Andenne, Belgique)

NASA Astrophysics Data System (ADS)

Toussaint, Michel; Otte, Marcel; Bonjean, Dominique; Bocherens, Hervé; Falguères, Christophe; Yokoyama, Yuji

1998-05-01

Nine Neandertal remains, including a mandible, a maxillary fragment and various teeth, have been discovered in recent years on Level 4A of the Scladina cave. They belong to a child around 10 years old or slightly older. The mandible presents a series of plesiomorphic traits but shows only very few derived characters 'typical' of adult Neandertals. The diet of this child appears to be strongly carnivorous.

Automatic Molar Extraction from Dental Panoramic Radiographs for Forensic Personal Identification

NASA Astrophysics Data System (ADS)

Samopa, Febriliyan; Asano, Akira; Taguchi, Akira

Measurement of an individual molar provides rich information for forensic personal identification. We propose a computer-based system for extracting an individual molar from dental panoramic radiographs. A molar is obtained by extracting the region-of-interest, separating the maxilla and mandible, and extracting the boundaries between teeth. The proposed system is almost fully automatic; all that the user has to do is clicking three points on the boundary between the maxilla and the mandible.

Elderly patients with maxillofacial trauma: study of mandibular condyle fractures.

PubMed

Nogami, Shinnosuke; Yamauchi, Kensuke; Yamashita, Toshio; Kataoka, Yoshihiro; Hirayama, Bunichi; Tanaka, Kenko; Takahashi, Tetsu

2015-02-01

The aim of this study was to investigate the trends and characteristic features of mandibular condyle fractures in elderly patients in terms of etiology, patterns, and treatment modalities. Records of 201 patients aged 65 years and older, who were treated for maxillofacial fractures at the Department of Oral and Maxillofacial Surgery, Kyushu Dental University, and Tohoku University from January 2002 to December 2013, were retrospectively analyzed. Patient records and radiographs were examined, with the following information: relevant medical history, cause of fracture, the presence and state of premolars and molars in the maxilla and mandible, number and location of mandible fracture, and method of treatment. As for the state of premolars and molars, premolars or molars in the mandible in contact with the maxilla were regarded as contacted. A fall was responsible for the majority of the fractures (173/201). With condyle fractures, there was a significant difference between the contacted and non-contacted group in regard to incidence. Furthermore, there was a significantly greater number of cases with symphysis and condyle combination fractures in the non-contacted group (70.9%) than in the contacted group (51.9%). As for the method of treatment, arthrocentesis was the most commonly employed. The present findings suggest that contacted molars in the maxilla and mandible have an influence on condyle fractures in elderly individuals. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Tensile force produced by a lipoma in the masseteric space possibly causing hyperostosis of the angle of the mandible.

PubMed

Zhang, Feng; Xie, Zhi-jian; Ge, Wei-li; Li, Sheng-lai; Li, Yi-ning

2009-09-01

A lipoma is a benign tumor which may occur in the adipose tissue of any part of the body. The tumor is most commonly found on the trunk and extremities. Although it is the most common tumor of mesenchymal origin in the head and neck, its incidence is relatively rare. Lipoma of the head and neck is usually located in subcutaneous tissue. It is rarely deep seated with osseous involvement and rarely occurs in children, especially below the age of 10. The case of a painless mass of one-year history in the right parotidomasseteric region of an eight-year-old boy is presented. The mass was revealed to be a classical lipoma in the masseteric space, possibly causing hyperostosis of the angle of the mandible. After removal of the mass and a spherical protuberance in the angle of the mandible, the boy recovered and no recurrence was noted after one-year follow-up. Hyperostosis is a rare phenomenon with lipoma. In this case, the hypothesis was posed that the tensile force produced by the lipoma in the masseteric space possibly caused hyperostosis of the angle of the mandible. To the authors' knowledge, a classical lipoma arising from the deep fascial space resulting in osseous change has not been described in the literature before.

Evaluation of the accuracy of linear measurements on multi-slice and cone beam computed tomography scans to detect the mandibular canal during bilateral sagittal split osteotomy of the mandible.

PubMed

Freire-Maia, B; Machado, V deC; Valerio, C S; Custódio, A L N; Manzi, F R; Junqueira, J L C

2017-03-01

The aim of this study was to compare the accuracy of linear measurements of the distance between the mandibular cortical bone and the mandibular canal using 64-detector multi-slice computed tomography (MSCT) and cone beam computed tomography (CBCT). It was sought to evaluate the reliability of these examinations in detecting the mandibular canal for use in bilateral sagittal split osteotomy (BSSO) planning. Eight dry human mandibles were studied. Three sites, corresponding to the lingula, the angle, and the body of the mandible, were selected. After the CT scans had been obtained, the mandibles were sectioned and the bone segments measured to obtain the actual measurements. On analysis, no statistically significant difference was found between the measurements obtained through MSCT and CBCT, or when comparing the measurements from these scans with the actual measurements. It is concluded that the images obtained by CT scan, both 64-detector multi-slice and cone beam, can be used to obtain accurate linear measurements to locate the mandibular canal for preoperative planning of BSSO. The ability to correctly locate the mandibular canal during BSSO will reduce the occurrence of neurosensory disturbances in the postoperative period. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Regeneration of a Tooth in a Tissue-Engineered Mandible After Resection of a Central Giant Cell Tumor. Demonstrating Evidence of Functional Matrix Theory and Ectodermal Origin of Teeth in a Human Model-A Case Report.

PubMed

Melville, James C; Couey, Marcus A; Tong, Matthew S; Marx, Robert E

2017-04-01

Central giant cell tumors (CGCTs) are uncommon lesions occurring in the jaw. They are benign but locally destructive osteolytic lesions. They usually occur in pediatric patients 5 to 15 years of age. Multiple noninvasive modalities of treatment (intralesional steroids, interferon, calcitonin, and denosumab) have been described for those lesions, but for those that are refractory to treatment, enucleation and curettage or resection is a curative surgery. This case report describes a pediatric patient who was diagnosed with an aggressive CGCT of the left mandible encompassing the right angle to the condyle. The lesion became refractory to noninvasive treatments and immediate resection and reconstruction was performed using principles of tissue engineering. After 5 years of close observation, the patient showed normal morphology and growth of his mandible, but surprisingly developed a left mandibular third molar (tooth 17) in the site of the mandibular resection and reconstruction. This is the first case report in the literature to show the spontaneous development of teeth in a human reconstructed mandible, contributing evidence toward the functional matrix theory of mandibular growth and ectodermal origin of teeth. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Updates in Head and Neck Reconstruction.

PubMed

Largo, Rene D; Garvey, Patrick B

2018-02-01

After reading this article, the participant should be able to: 1. Have a basic understanding of virtual planning, rapid prototype modeling, three-dimensional printing, and computer-assisted design and manufacture. 2. Understand the principles of combining virtual planning and vascular mapping. 3. Understand principles of flap choice and design in preoperative planning of free osteocutaneous flaps in mandible and midface reconstruction. 4. Discuss advantages and disadvantages of computer-assisted design and manufacture in reconstruction of advanced oncologic mandible and midface defects. Virtual planning and rapid prototype modeling are increasingly used in head and neck reconstruction with the aim of achieving superior surgical outcomes in functionally and aesthetically critical areas of the head and neck compared with conventional reconstruction. The reconstructive surgeon must be able to understand this rapidly-advancing technology, along with its advantages and disadvantages. There is no limit to the degree to which patient-specific data may be integrated into the virtual planning process. For example, vascular mapping can be incorporated into virtual planning of mandible or midface reconstruction. Representative mandible and midface cases are presented to illustrate the process of virtual planning. Although virtual planning has become helpful in head and neck reconstruction, its routine use may be limited by logistic challenges, increased acquisition costs, and limited flexibility for intraoperative modifications. Nevertheless, the authors believe that the superior functional and aesthetic results realized with virtual planning outweigh the limitations.

The use of resorbable plates in association with dental arch stabilization in the treatment of mandibular fractures in children.

PubMed

Li, Zhi; David, Ongodia; Li, Zu-Bing

2014-07-01

The purpose of this study was to investigate the effect of resorbable plate fixation in association with dental arch stabilization in the treatment of displaced mandibular fractures in children. Thirteen children (5 girls and 8 boys, age range 2 years 5 months to 12 years 2 months) with displaced mandibular fractures were included in this case series. Open reduction by intraoral approach was performed on these patients, and the fractures were fixed using resorbable plates and monocortical screws placed at the lower border of the mandible. At the same time, an arch bar or orthodontic wire splint was anchored using stainless steel wires or resin on the teeth to stabilize the whole mandibular dental arch. Postoperatively, follow-up was undertaken to evaluate the fracture healing, mandible movement, and mandible growth. Postoperatively, all patients achieved uneventful healing; premorbid occlusion restoration and wound healing were achieved, along with unimpaired function and normal growth and development of the mandible. Complications such as damage to tooth buds, infection, malunion, and nonunion were not encountered in these patients. Resorbable plates use in association with dental arch stabilization can provide good stabilization for mandibular fractures and is a promising approach for the treatment of displaced mandibular fractures in children. Copyright © 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

A study of the utility of measuring mandibular mobility by means of the interincisal dimension.

PubMed

Ellis, E; Fonseca, R J; Upton, L G; Scott, R F

1989-02-01

The purpose of this investigation was to determine the reliability of using the interincisal dimension as a measure of mandibular range of motion. Thirty patients who underwent mandibular advancement and 15 patients who underwent mandibular setback were included in this study. Preoperatively, a lateral cephalogram in centric relation and a second cephalogram with the mandible at maximum voluntary gape were obtained. Immediately following surgery, another centric relation cephalogram was obtained. A composite tracing of the two preoperative tracings was made to show how the mandible changed in position from the closed-mouth to the open-mouth radiographs. The proximal segment (ramus) of the postoperative cephalogram was then superimposed on the open-mouth mandibular ramus, and the distal segment of the postoperative mandible was drawn. This composite produced a tracing of what the postoperative maximal gape cephalogram would be if the same amount of condylar rotation and translation as in the preoperative tracing had occurred. The preoperative interincisal dimension was recorded on the composite tracings (factoring in any overbite or openbite) as was the would-be postoperative interincisal dimension. These measures were compared using the paired t test and Pearson's correlations to determine if there were any significant differences between them. The results showed that the interincisal dimension is a fairly reliable measure of mandibular mobility even when the length of the mandible is altered with surgery.

Experimental Validation of Plastic Mandible Models Produced by a "Low-Cost" 3-Dimensional Fused Deposition Modeling Printer.

PubMed

Maschio, Federico; Pandya, Mirali; Olszewski, Raphael

2016-03-22

The objective of this study was to investigate the accuracy of 3-dimensional (3D) plastic (ABS) models generated using a low-cost 3D fused deposition modelling printer. Two human dry mandibles were scanned with a cone beam computed tomography (CBCT) Accuitomo device. Preprocessing consisted of 3D reconstruction with Maxilim software and STL file repair with Netfabb software. Then, the data were used to print 2 plastic replicas with a low-cost 3D fused deposition modeling printer (Up plus 2®). Two independent observers performed the identification of 26 anatomic landmarks on the 4 mandibles (2 dry and 2 replicas) with a 3D measuring arm. Each observer repeated the identifications 20 times. The comparison between the dry and plastic mandibles was based on 13 distances: 8 distances less than 12 mm and 5 distances greater than 12 mm. The mean absolute difference (MAD) was 0.37 mm, and the mean dimensional error (MDE) was 3.76%. The MDE decreased to 0.93% for distances greater than 12 mm. Plastic models generated using the low-cost 3D printer UPplus2® provide dimensional accuracies comparable to other well-established rapid prototyping technologies. Validated low-cost 3D printers could represent a step toward the better accessibility of rapid prototyping technologies in the medical field.

Tongue-mandible coupling movements during saliva swallowing.

PubMed

Bourdiol, P; Mishellany-Dutour, A; Peyron, M-A; Woda, A

2014-03-01

The purpose of this study was to measure the tongue and mandible positions and displacements in relation to the maxilla in the midsagittal plane to characterize the different saliva swallowing patterns by recording their kinematics. A 2D electromagnetic articulograph using four transducer coils, three attached to the upper surface of the tongue midline plus one attached to the chin anterior part allowed continuous evaluation of tongue and chin movements in twelve young adults in good general health. During 170 s sequences recorded at a frequency of 100 Hz, subjects were at rest, silently reading a text they had chosen. The subjects were free to swallow during the sequence. Deglutition of accumulated saliva was analysed after averaging all values obtained during successive 250 ms periods. We identified three elementary swallowing patterns. Mean duration of tongue-mandible movements were 1·51 ± 0·17 s, 1·63 ± 0·14 s and 2·00 ± 0·08 s for the first, second and third patterns respectively. In the light of other studies based on intra-oral pressure recordings, our results help to understand the tongue-mandible coupling behaviours involved in managing an in-mouth saliva bolus during the three elementary swallowing patterns identified. © 2014 John Wiley & Sons Ltd.

Relationship between chin deviation and the position and morphology of the mandible in individuals with a unilateral cleft lip and palate

PubMed Central

Kim, Kyung-Seon; Park, Soo-Byung; Kim, Seong-Sik; Kim, Yong-Il

2013-01-01

Objective In this study, we aimed to examine the relationship between chin deviation and the positional and morphological features of the mandible and to determine the factors that contributed to chin deviation in individuals with a unilateral cleft lip and palate (UCLP). Methods Cone-beam computed tomography (CBCT) images of 28 adults with UCLP were analyzed in this study. Segmented three-dimensional temporomandibular fossa and mandible images were reconstructed, and angular, linear, and volumetric parameters were measured. Results For all 28 individuals, the chin was found to deviate to the cleft side by 1.59 mm. Moreover, among these 28 individuals, only 7 showed distinct (more than 4 mm) chin deviation, which was toward the cleft side. Compared to the non-cleft side, the mandibular body length, frontal ramal inclination, and vertical position of the condyle were lower and inclination of the temporomandibular fossa was steeper on the cleft side. Furthermore, the differences in inclination of the temporomandibular fossa, mandibular body length, ramus length, and condylar volume ratio (non-deviated/deviated) were positively correlated with chin deviation. Conclusions UCLP individuals show mild chin deviation to the cleft side. Statistical differences were noted in the parameters that represented positional and morphological asymmetries of the mandible and temporomandibular fossa; however, these differences were too small to indicate clinical significance. PMID:24015386

Histomorphometric analysis following augmentation of the posterior mandible using cancellous bone-block allograft.

PubMed

Nissan, Joseph; Marilena, Vered; Gross, Ora; Mardinger, Ofer; Chaushu, Gavriel

2011-06-15

The present study was conducted to histologically and histomorphometrically evaluate the application of cancellous bone-block allografts for the augmentation of the posterior atrophic mandible. Twenty-four consecutive patients underwent augmentation with cancellous bone-block allografts in the posterior mandible. A bony deficiency of at least 3 mm horizontally and/or vertically according to CT para-axial reconstruction served as inclusion criteria. Following 6 months, 85 implants were placed and a cylindrical sample core was collected. All specimens were prepared for histological and histomorphometrical examination. Implant survival rate was 95.3%. Follow-up ranged 12-66 months (mean 43 ± 19 months). The mean newly formed bone was 44 ± 28%, that of the residual cancellous bone-block allograft 29 ± 24%, and of the marrow and connective tissue 27 ± 21%. Statistically significant histomorphometric differences regarding newly formed bone (69% vs. 31%, p = 0.05) were found between younger (< 45 years) and older (> 45 years) patients, respectively. Histomorphometric differences regarding residual cancellous bone-block allograft (17% vs. 35%) and of the marrow and connective tissue (14% vs. 34%) were not statistically significant. Cancellous bone-block allograft is biocompatible and osteoconductive, permitting new bone formation following augmentation of extremely atrophic posterior mandible with a two-stage implant placement procedure. New bone formation was age-dependent. Copyright © 2011 Wiley Periodicals, Inc.

Hystricognathy vs Sciurognathy in the Rodent Jaw: A New Morphometric Assessment of Hystricognathy Applied to the Living Fossil Laonastes (Diatomyidae)

PubMed Central

Hautier, Lionel; Lebrun, Renaud; Saksiri, Soonchan; Michaux, Jacques; Vianey-Liaud, Monique; Marivaux, Laurent

2011-01-01

While exceptional for an intense diversification of lineages, the evolutionary history of the order Rodentia comprises only a limited number of morphological morphotypes for the mandible. This situation could partly explain the intense debates about the taxonomic position of the latest described member of this clade, the Laotian rock rat Laonastes aenigmamus (Diatomyidae). This discovery has re-launched the debate on the definition of the Hystricognathi suborder identified using the angle of the jaw relative to the plane of the incisors. Our study aims to end this ambiguity. For clarity, it became necessary to revisit the entire morphological diversity of the mandible in extant and extinct rodents. However, current and past rodent diversity brings out the limitations of the qualitative descriptive approach and highlights the need for a quantitative approach. Here, we present the first descriptive comparison of the masticatory apparatus within the Ctenohystrica clade, in combining classic comparative anatomy with morphometrical methods. First, we quantified the shape of the mandible in rodents using 3D landmarks. Then, the analysis of osteological features was compared to myological features in order to understand the biomechanical origin of this morphological diversity. Among the morphological variation observed, the mandible of Laonastes aenigmamus displays an intermediate association of features that could be considered neither as sciurognathous nor as hystricognathous. PMID:21490933

Experimental Validation of Plastic Mandible Models Produced by a “Low-Cost” 3-Dimensional Fused Deposition Modeling Printer

PubMed Central

Maschio, Federico; Pandya, Mirali; Olszewski, Raphael

2016-01-01

Background The objective of this study was to investigate the accuracy of 3-dimensional (3D) plastic (ABS) models generated using a low-cost 3D fused deposition modelling printer. Material/Methods Two human dry mandibles were scanned with a cone beam computed tomography (CBCT) Accuitomo device. Preprocessing consisted of 3D reconstruction with Maxilim software and STL file repair with Netfabb software. Then, the data were used to print 2 plastic replicas with a low-cost 3D fused deposition modeling printer (Up plus 2®). Two independent observers performed the identification of 26 anatomic landmarks on the 4 mandibles (2 dry and 2 replicas) with a 3D measuring arm. Each observer repeated the identifications 20 times. The comparison between the dry and plastic mandibles was based on 13 distances: 8 distances less than 12 mm and 5 distances greater than 12 mm. Results The mean absolute difference (MAD) was 0.37 mm, and the mean dimensional error (MDE) was 3.76%. The MDE decreased to 0.93% for distances greater than 12 mm. Conclusions Plastic models generated using the low-cost 3D printer UPplus2® provide dimensional accuracies comparable to other well-established rapid prototyping technologies. Validated low-cost 3D printers could represent a step toward the better accessibility of rapid prototyping technologies in the medical field. PMID:27003456

Conservatism and Adaptability during Squirrel Radiation: What Is Mandible Shape Telling Us?

PubMed Central

Casanovas-Vilar, Isaac; van Dam, Jan

2013-01-01

Both functional adaptation and phylogeny shape the morphology of taxa within clades. Herein we explore these two factors in an integrated way by analyzing shape and size variation in the mandible of extant squirrels using landmark-based geometric morphometrics in combination with a comparative phylogenetic analysis. Dietary specialization and locomotion were found to be reliable predictors of mandible shape, with the prediction by locomotion probably reflecting the underlying diet. In addition a weak but significant allometric effect could be demonstrated. Our results found a strong phylogenetic signal in the family as a whole as well as in the main clades, which is in agreement with the general notion of squirrels being a conservative group. This fact does not preclude functional explanations for mandible shape, but rather indicates that ancient adaptations kept a prominent role, with most genera having diverged little from their ancestral clade morphologies. Nevertheless, certain groups have evolved conspicuous adaptations that allow them to specialize on unique dietary resources. Such adaptations mostly occurred in the Callosciurinae and probably reflect their radiation into the numerous ecological niches of the tropical and subtropical forests of Southeastern Asia. Our dietary reconstruction for the oldest known fossil squirrels (Eocene, 36 million years ago) show a specialization on nuts and seeds, implying that the development from protrogomorphous to sciuromorphous skulls was not necessarily related to a change in diet. PMID:23593456

MARS: A protein family involved in the formation of vertical skeletal elements.

PubMed

Abehsera, Shai; Peles, Shani; Tynyakov, Jenny; Bentov, Shmuel; Aflalo, Eliahu D; Li, Shihao; Li, Fuhua; Xiang, Jianhai; Sagi, Amir

2017-05-01

Vertical organizations of skeletal elements are found in various vertebrate teeth and invertebrate exoskeletons. The molecular mechanism behind the development of such structural organizations is poorly known, although it is generally held that organic matrix proteins play an essential role. While most crustacean cuticular organizations exhibit horizontal chitinous layering, a typical vertical organization is found towards the surface of the teeth in the mandibles of the crayfish Cherax quadricarinatus. Candidate genes encoding for mandible-forming structural proteins were mined in C. quadricarinatus molt-related transcriptomic libraries by using a binary patterning approach. A new protein family, termed the Mandible Alanine Rich Structural (MARS) protein family, with a modular sequence design predicted to form fibers, was found. Investigations of spatial and temporal expression of the different MARS genes suggested specific expression in the mandibular teeth-forming epithelium, particularly during the formation of the chitinous vertical organization. MARS loss-of-function RNAi experiments resulted in the collapse of the organization of the chitin fibers oriented vertically to the surface of the crayfish mandibular incisor tooth. A general search of transcriptomic libraries suggested conservation of MARS proteins across a wide array of crustaceans. Our results provide a first look into the molecular mechanism used to build the complex crustacean mandible and into the specialized vertical structural solution that has evolved in skeletal elements. Copyright © 2017 Elsevier Inc. All rights reserved.

Transoral Open Reduction for Subcondylar Fractures of the Mandible Using an Angulated Screwdriver System.

PubMed

Nam, Seung Min; Kim, Yong Bae; Cha, Han Gyu; Wee, Syeo Young; Choi, Chang Yong

2015-09-01

The management of subcondylar mandibular fractures has been a matter of controversy. Although closed reduction is the most useful method, it can be difficult to achieve anatomical reduction with this technique compared with open reduction and internal fixation (ORIF). Most surgeons prefer to treat subcondylar fractures by extraoral approaches rather than intraoral approaches because extraoral approaches provide good visualization of the operative field. The retromandibular, submandibular, and perilobular approaches are commonly performed in the treatment of displaced condylar or subcondylar fractures and that the functional results of these treatments are good. However, extraoral approaches have a high rate of surgical complications such as salivary fistula formation, visible scarring, and facial nerve injury, compared with intraoral approaches. Therefore, this clinical study evaluated the clinical results of ORIF for mandibular subcondylar fractures through a transoral approach using an angulated screwdriver system without endoscopic assistance. A study was conducted between March 2011 and October 2012. Eleven patients with subcondylar fractures of the mandible were treated through a transoral approach using an angulated screwdriver. There were 10 male patients and 1 female patient aged 21 to 72 years (mean, 38 years). Nine patients had a symphyseal or parasymphyseal fracture, and 2 patients had isolated subcondylar fractures of the mandible. Eleven patients with subcondylar fractures of the mandible were treated with a transoral approach using an angulated screwdriver. The subcondylar fracture was on the left side in 6 patients and on the right in 5. All patients achieved satisfactory ranges of temporomandibular joint movement with an interincisal distance of more than 40 mm without deviation and stable individual centric occlusion. The maximum operation duration was 165 minutes, and the average duration of ORIF was 97 minutes. The association between the operation duration and the number of operations was statistically significant. Our clinical study shows that subcondylar fractures of the mandible can be treated using an angulated screwdriver system through a transoral approach and that this technique provides reliable, satisfactory, and safe clinical outcomes.

The pediatric mandible: I. A primer on growth and development.

PubMed

Smartt, James M; Low, David W; Bartlett, Scott P

2005-07-01

After studying this article, the participant should be able to: 1. Describe embryonic and fetal mandibular development. 2. Summarize the aggregate changes in mandibular form from birth to puberty. 3. Describe the eruption and maturation of the deciduous and permanent mandibular dentition. In this, the first of two articles addressing the surgical management of pediatric mandibular fractures, the authors provide a detailed discussion of mandibular development and anatomy during the fetal period, infancy, and childhood. A review of the pertinent literature was performed. The changing structure of the developing mandible is discussed, with particular attention to surgically relevant anatomical structures. Throughout development, key anatomical structures with relevance to surgical therapy change markedly in position. The mandible undergoes significant change in its bony structure and the composition of its surrounding soft tissues. The mandible's bony structure becomes more robust, with an increasingly acute gonial angle and enlargement of the ramus and body. Furthermore, the mandible provides the bony structure from which tooth buds erupt as the deciduous and permanent dentition--a process that generates significant growth of the alveolar process. As a consequence, the distance between the developing dentition and the inferior mandibular border increases. While the canal of the inferior alveolar nerve undergoes significant superior displacement, the mental foramen becomes positioned more posteriorly over time. In addition, the ligamentous and muscular attachments that surround the temporomandibular joint become increasingly robust. Throughout childhood and adolescence, the blood supply of the mandibular body changes little, with the buccal periosteal plexus and inferior dental artery making significant contributions. Mandibular growth provides the basis for normal occlusal relations and the generation of increasingly large masticatory force. Although the exact mechanisms of bone remodeling during mandibular development remain unclear, the process likely receives contributions from primary growth centers and the response to local alterations in biomechanical force produced by surrounding soft-tissue structures. A working knowledge of the changing mandibular anatomy is a prerequisite for effective clinical management of traumatic injury.

Anatomic study on mental canal and incisive nerve canal in interforaminal region in Chinese population.

PubMed

Xu, Yun; Suo, Ning; Tian, Xiufen; Li, Fei; Zhong, Guangxin; Liu, Xiaoran; Bao, Yongxing; Song, Tao; Tian, Hua

2015-08-01

This study was aimed to detect the positions of mental canal and incisive nerve canal as well as the prolongation of mandibular canal in interforaminal region in Chinese population to supply the reference data of the surgical safe zone in chin for clinicians. A total of 80 formalin-fixed semi-mandibles of Chinese adult cadavers were dissected, the positions and courses of mental canal and incisive nerve canal as well as the prolongation of mandibular canal in interforaminal region were measured. The mental foramina were present in all cases (100 %), and most of them were located below 2nd premolar (58.75 %). Accessory mental foramina were observed in 5 %. The anterior end of mandibular canal, extending along the course of 7.37 ± 1.10 mm above the lower border of mandible to interforaminal region about 3.54 ± 0.70 mm medial to the mental foramen, most often ended below between the two premolars (73.75 %), where it continued as the incisive nerve canal (100 %) and the mental canal (96.25 %). Mental canal, with the wall formed by compact bone, being 2.60 ± 0.60 mm in diameter and 4.01 ± 1.20 mm in length, opened into mental foramen. Incisive nerve canal, with the wall formed by thin compact bone and/or partly or completely by spongy bone, being 1.76 ± 0.27 mm in diameter and 24.87 ± 2.23 mm in length, extended to the incisor region along the course of 9.53 ± 1.43 mm above the lower border of mandible, and most often ended below the lateral incisor (70.00 %). This research recommended for chin operations in Chinese population: the surgical safe zone could be set in the region about over 4 mm anterior to the mental foramen, and over 12 mm above inferior border of mandible for anterior alveolar surgery, or within 9 mm above inferior border of mandible for genioplasty.

Tongue Blade Bite Test Predicts Mandible Fractures

PubMed Central

Neiner, John; Free, Rachael; Caldito, Gloria; Moore-Medlin, Tara; Nathan, Cherie-Ann

2015-01-01

The aim of the study is to evaluate the utility of a simple tongue blade bite test in predicting mandible fractures and use this test as an alternative screening tool for further workup. This is a retrospective chart review. An institutional review board approved the retrospective review of patients evaluated by the Department of Otolaryngology at a single institution for facial trauma performed from November 1, 2011, to February 27, 2014. Patients who had a bite test documented were included in the study. CT was performed in all cases and was used as the gold standard to diagnose mandible fractures. Variables analyzed included age, sex, fracture type/location on CT, bite test positivity, and operative intervention. A total of 86 patients met the inclusion criteria and of those 12 were pediatric patients. Majority of the patients were male (80.2%) and adult (86.0%; average age: 34.3 years). Fifty-seven patients had a negative bite test and on CT scans had no mandible fracture. Twenty-three patients had a positive bite test and a CT scan confirmed fracture. The bite test revealed a sensitivity of 88.5% (95% CI: 69.8–97.6%), specificity of 95.0% (95% CI:86.1–99%), positive predictive value [PPV] of 88.5% (95% CI: 69.8–97.6%), and negative predictive value [NPV] of 95.0% (95% CI: 86.1–99.0%). Among pediatric patients, the sensitivity was 100% (95% CI: 29.9–100%), specificity was 88.9% (95% CI: 68.4–100%), PPV was 75.0% (95% CI: 19.4–99.4%), and NPV was 100% (95% CI: 63.1–100%). The tongue blade bite test is a quick inexpensive diagnostic tool for the otolaryngologist with high sensitivity and specificity for predicting mandible fractures. In the pediatric population, where avoidance of unnecessary CT scans is of highest priority, a wider range of data collection should be undertaken to better assess its utility. PMID:27162567

Evolutionary patterns and processes in the radiation of phyllostomid bats

PubMed Central

2011-01-01

Background The phyllostomid bats present the most extensive ecological and phenotypic radiation known among mammal families. This group is an important model system for studies of cranial ecomorphology and functional optimisation because of the constraints imposed by the requirements of flight. A number of studies supporting phyllostomid adaptation have focused on qualitative descriptions or correlating functional variables and diet, but explicit tests of possible evolutionary mechanisms and scenarios for phenotypic diversification have not been performed. We used a combination of morphometric and comparative methods to test hypotheses regarding the evolutionary processes behind the diversification of phenotype (mandible shape and size) and diet during the phyllostomid radiation. Results The different phyllostomid lineages radiate in mandible shape space, with each feeding specialisation evolving towards different axes. Size and shape evolve quite independently, as the main directions of shape variation are associated with mandible elongation (nectarivores) or the relative size of tooth rows and mandibular processes (sanguivores and frugivores), which are not associated with size changes in the mandible. The early period of phyllostomid diversification is marked by a burst of shape, size, and diet disparity (before 20 Mya), larger than expected by neutral evolution models, settling later to a period of relative phenotypic and ecological stasis. The best fitting evolutionary model for both mandible shape and size divergence was an Ornstein-Uhlenbeck process with five adaptive peaks (insectivory, carnivory, sanguivory, nectarivory and frugivory). Conclusions The radiation of phyllostomid bats presented adaptive and non-adaptive components nested together through the time frame of the family's evolution. The first 10 My of the radiation were marked by strong phenotypic and ecological divergence among ancestors of modern lineages, whereas the remaining 20 My were marked by stasis around a number of probable adaptive peaks. A considerable amount of cladogenesis and speciation in this period is likely to be the result of non-adaptive allopatric divergence or adaptations to peaks within major dietary categories. PMID:21605452

Evolutionary patterns and processes in the radiation of phyllostomid bats.

PubMed

Monteiro, Leandro R; Nogueira, Marcelo R

2011-05-23

The phyllostomid bats present the most extensive ecological and phenotypic radiation known among mammal families. This group is an important model system for studies of cranial ecomorphology and functional optimisation because of the constraints imposed by the requirements of flight. A number of studies supporting phyllostomid adaptation have focused on qualitative descriptions or correlating functional variables and diet, but explicit tests of possible evolutionary mechanisms and scenarios for phenotypic diversification have not been performed. We used a combination of morphometric and comparative methods to test hypotheses regarding the evolutionary processes behind the diversification of phenotype (mandible shape and size) and diet during the phyllostomid radiation. The different phyllostomid lineages radiate in mandible shape space, with each feeding specialisation evolving towards different axes. Size and shape evolve quite independently, as the main directions of shape variation are associated with mandible elongation (nectarivores) or the relative size of tooth rows and mandibular processes (sanguivores and frugivores), which are not associated with size changes in the mandible. The early period of phyllostomid diversification is marked by a burst of shape, size, and diet disparity (before 20 Mya), larger than expected by neutral evolution models, settling later to a period of relative phenotypic and ecological stasis. The best fitting evolutionary model for both mandible shape and size divergence was an Ornstein-Uhlenbeck process with five adaptive peaks (insectivory, carnivory, sanguivory, nectarivory and frugivory). The radiation of phyllostomid bats presented adaptive and non-adaptive components nested together through the time frame of the family's evolution. The first 10 My of the radiation were marked by strong phenotypic and ecological divergence among ancestors of modern lineages, whereas the remaining 20 My were marked by stasis around a number of probable adaptive peaks. A considerable amount of cladogenesis and speciation in this period is likely to be the result of non-adaptive allopatric divergence or adaptations to peaks within major dietary categories.

[The treatment of patients with traumatic osteomyelitis of the mandible by using porous permeable titanium nickelide implants].

PubMed

Tazin, I D; Sysoliatin, P G; Panov, L A; Giunter, V E

2000-01-01

Use of titanium nickelide based porous permeable implants for repair of postosteomyelitis mandibular defects is discussed. Five patients with mandibular defects of different location and extent were operated on. Surgical methods are described. A clinical example of using a porous permeable implant is offered. The implant designed as a mandible was used for repair of an extensive mandibular defect. Good immediate and remote results of operations indicate good prospects of using such implants.

Thin-plate spline (TPS) graphical analysis of the mandible on cephalometric radiographs.

PubMed

Chang, H P; Liu, P H; Chang, H F; Chang, C H

2002-03-01

We describe two cases of Class III malocclusion with and without orthodontic treatment. A thin-plate spline (TPS) analysis of lateral cephalometric radiographs was used to visualize transformations of the mandible. The actual sites of mandibular skeletal change are not detectable with conventional cephalometric analysis. These case analyses indicate that specific patterns of mandibular transformation are associated with Class III malocclusion with or without orthopaedic therapy, and visualization of these deformations is feasible using TPS graphical analysis.

Archaeological Investigations at Sites 45-DO-242 and 45-DO-243, Chief Joseph Dam Project, Washington.

DTIC Science & Technology

1984-01-01

from the dorsal and ventral surfaces. On the other, asymmetry was produced by Introduction of only one shoulder during flaking. Neither specimen shows...On the other, asymmetry was produced by Introduction of only one shoulder during flaking. Neither specimen shows any evidence of hafting, i.e., both...fragments, 4 humeri, 1 humerus fragment, I ulna, 1 pelvis , 1 Innomlnate fragment, 2 femurs. Zone 24: 4 mandibles, 8 mandible fragments, 1 skull, I

Fixation Release and the Bone Bandaid: A New Bone Fixation Device Paradigm

PubMed Central

Shayesteh Moghaddam, Narges; Jahadakbar, Ahmadreza; Amerinatanzi, Amirhesam; Skoracki, Roman; Miller, Michael; Dean, David; Elahinia, Mohammad

2017-01-01

The current gold standard of care for mandibular segmental defeat reconstruction is the use of Ti-6Al-4V immobilization hardware and fibular double barrel graft. This method is often successful immediately at restoring mandible function, however the highly stiff fixation hardware causes stress shielding of the grafted bone and stress concentration in the fixation device over time which can lead to fixation device failure and revision surgery. The purpose of reconstructive surgery could be to create normal stress trajectories in the mandible following engraftment. We investigate the use of a two stage mechanism which separates the immobilization/healing and regenerative phases of mandibular segmental defect treatment. The device includes the use of a very stiff, Ti-6Al-4V, releasable mechanism which assures bone healing. Therefore it could be released once the reconstructed boney tissue and any of its ligamentous attachments have completely healed. Underneath the released Ti-6Al-4V plate would be a pre-loaded nitinol (NiTi) wire-frame apparatus that facilitates the normal stress-strain trajectory through the engrafted bone after the graft is healed in place and the Ti-6Al-4V fixation device has been released. Due to the use of NiTi wires forming a netting that connects vascularized bone and possibly bone chips, bone grafts are also more likely to be incorporate rather than to resorb. We first evaluated a healthy adult mandible during normal mastication to obtain the normal stress-strain distribution. Then, we developed the finite element (FE) model of the mandibular reconstruction (in the M1-3 region) with the proposed fixation device during the healing (locked state) and post-healing (released state) periods. To recreate normal stress trajectory in the reconstructed mandible, we applied the Response Surface Methodology (RMS) to optimize the Bone Bandaid geometry (i.e., wire diameters and location). The results demonstrate that the proposed mechanism immobilizes the grafted bone in the locked state properly since the maximum resultant gap (21.54 micron) between the graft and host mandible surfaces are in the safe region (less than 300 micron). By considering the von Mises criteria for failure, FE analysis together with experimental studies (i.e., compressive and tensile testing on the inferior and superior fixation devices, respectively) confirm that the proposed fixation devices do not fail, showing safety factor of at least 10.3. Based on the Response Surface Methodology (RSM) technique, the optimal parameter values for the wires are achieved (0.65 mm and 1 mm for the superior and inferior wires, respectively) and the required level of preload on each wire are calculated (369.8 N and 229 N for the inferior and superior wires, respectively). The FE results for stress distribution on the reconstructed mandible during the released state closely match that of a healthy mandible. PMID:28952484

Mandible shape in hybrid mice.

PubMed

Renaud, Sabrina; Alibert, Paul; Auffray, Jean-Christophe

2009-09-01

Hybridisation between closely related species is frequently seen as retarding evolutionary divergence and can also promote it by creating novel phenotypes due to new genetic combinations and developmental interactions. We therefore investigated how hybridisation affects the shape of the mouse mandible, a well-known feature in evo-devo studies. Parental groups corresponded to two strains of the European mouse sub-species Mus musculus domesticus and Mus musculus musculus. Parents and hybrids were bred in controlled conditions. The mandibles of F(1) hybrids are mostly intermediate between parental phenotypes as expected for a complex multigenic character. Nevertheless, a transgressive effect as well as an increased phenotypic variance characterise the hybrids. This suggests that hybridisation between the two subspecies could lead to a higher phenotypic variance due to complex interactions among the parental genomes including non-additive genetic effects. The major direction of variance is conserved, however, among hybrids and parent groups. Hybridisation may thus play a role in the production of original transgressive phenotypes occurring following pre-existing patterns of variance.

The influence of sagittal position of the mandible in facial attractiveness and social perception.

PubMed

Sena, Lorena Marques Ferreira de; Damasceno E Araújo, Lislley Anne Lacerda; Farias, Arthur Costa Rodrigues; Pereira, Hallissa Simplício Gomes

2017-01-01

This study aims at comparing the perception of orthodontists, maxillofacial surgeons, visual artists and laypersons when evaluating the influence of sagittal position of the mandible - in lateral view - in facial attractiveness; at a job hiring; and in the perception of socioeconomic profile. A black male, a white male, a black female and a white female with harmonic faces served as models to obtain a facial profile photograph. Each photograph was digitally manipulated to obtain seven facial profiles: an ideal, three simulating mandibular advancement and three simulating mandibular retrusion, producing 28 photographs. These photographs were evaluated through a questionnaire by orthodontists, maxillofacial surgeons, visual artists and laypersons. The anteroposterior positioning of the mandible exerted strong influence on the level of facial attractiveness, but few significant differences between the different groups of evaluators were observed (p < 0.05). The profiles pointed as the most attractive were also pointed as more favorable to be hired to a job position and pointed also as having the best socioeconomic condition.

[Stress analysis of the mandible by 3D FEA in normal human being under three loading conditions].

PubMed

Sun, Jian; Zhang, Fu-qiang; Wang, Dong-wei; Yu, Jia; Wang, Cheng-tao

2004-02-01

The condition and character of stress distribution in the mandibular in normal human being during centric, protrusive, laterotrusive occlusion were analysed. The three-dimensional finite element model of the mandibular was developed by helica CT scanning and CAD/CAM software, and three-dimensional finite element stress analysis was done by ANSYS software. Three-dimensional finite element model of the mandibular was generated. Under these three occlusal conditions, the stress of various regions in the mandible were distributed unequally, and the stress feature was different;while the stress of corresponding region in bilateral mandibular was in symmetric distribution. The stress value of condyle neck, the posterior surface of coronoid process and mandibular angle were high. The material properties of mandible were closely correlated to the value of stress. Stress distribution were similar according to the three different loading patterns, but had different effects on TMJ joint. The concentrated areas of stress were in the condyle neck, the posterior surface of coronoid process and mandibular angle.

Peripheral giant cell granuloma of the mandibular condyle presenting as a preauricular mass.

PubMed

Ozcan, Cengiz; Apaydin, F Demir; Görür, Kemal; Apa, Duygu Düşmez

2005-03-01

Preauricular mass is a common symptom for patients presenting to the otorhinolaryngologist with parotid disease. Some rare extraparotid lesions, originating from the temporomandibular joint and the mandible itself, also share the same localization and therefore are to be taken into consideration for the differential diagnosis with parotid lesions. Giant cell granuloma (GCG) was first described by Jaffe in 1953. Peripheral GCG (PGCG) is an exophytic soft tissue lesion originating from the periodontal ligament and periosteum. It is located only within the oral cavity. Central GCG (CGCG) is an uncommon benign fibro-osseous lesion generally presenting as an expansible mass with cortical bone defect. It is generally located in the mandible. The brown tumor of hyperparathyroidism and giant cell tumor must be ruled out because of the microscopic similarities of these lesions. The first case of PGCG of the mandible condyle is presented, and attention is drawn to mandibular diseases for the differential diagnosis of the preauricular mass.

Pediatric maxillofacial fractures.

PubMed

Spring, P M; Cote, D N

1996-05-01

Maxillofacial trauma in the pediatric population is a relatively infrequent occurrence. Studies have demonstrated consistently that 5% of all facial fractures occur in children. The low percentage of facial fractures in this age group has been attributed, in part, to the lack of full pneumatization of the sinuses until later in childhood. Review of the literature indicates that boys are more commonly affected than girls and that the majority of pediatric facial fractures occur in children between 6 and 12 years of age. Motor vehicle accidents, falls, and blunt trauma are responsible for the largest number of pediatric facial fractures. The most common site of facial fracture is the nose and dentoalveolan complex, followed by the mandible, orbit, and midface in most pediatric cohorts. Management of the mandible is often conservative owing to the high percentage of isolated condylar fractures in children. Open reduction and internal fixation of pediatric facial fractures is indicated in complex mandible, midface, and orbital fractures. The effect of rigid fixation on facial skeleton growth is not completely understood.

Obstructive sleep apnea syndrome in a pubescent boy of short stature was improved with an orthodontic mandibular advancement oral appliance: a case report.

PubMed

Ito, Shin; Otake, Hironao; Tsuiki, Satoru; Miyao, Etsuko; Noda, Akiko

2015-01-15

We report a 16-year-old pubescent pediatric patient with obstructive sleep apnea syndrome (OSAS) and short stature whose apnea hypopnea index (AHI) was significantly reduced following the use of an orthodontic oral appliance that advances the mandible ventrally. The mandible was advanced 64% of the maximal mandibular protrusive position with use of the appliance over a 3-year period. The patient's AHI without the appliance in place decreased from 101.6/h at baseline to 11/h after treatment. Moreover, the patient's height increased 14 cm during treatment, resulting in height close to the average height for his age. Cephalometric analysis revealed an improvement in his retrognathic mandible and proclination of the upper front teeth. In conclusion, an orthodontic mandibular advancement oral appliance played an important role not only in improving the patient's OSAS but also in normalizing his physical growth during puberty. © 2015 American Academy of Sleep Medicine.

Cone-beam computed tomography evaluation of dentoskeletal changes after asymmetric rapid maxillary expansion.

PubMed

Baka, Zeliha Muge; Akin, Mehmet; Ucar, Faruk Izzet; Ileri, Zehra

2015-01-01

The aims of this study were to quantitatively evaluate the changes in arch widths and buccolingual inclinations of the posterior teeth after asymmetric rapid maxillary expansion (ARME) and to compare the measurements between the crossbite and the noncrossbite sides with cone-beam computed tomography (CBCT). From our clinic archives, we selected the CBCT records of 30 patients with unilateral skeletal crossbite (13 boys, 14.2 ± 1.3 years old; 17 girls, 13.8 ± 1.3 years old) who underwent ARME treatment. A modified acrylic bonded rapid maxillary expansion appliance including an occlusal locking mechanism was used in all patients. CBCT records had been taken before ARME treatment and after a 3-month retention period. Fourteen angular and 80 linear measurements were taken for the maxilla and the mandible. Frontally clipped CBCT images were used for the evaluation. Paired sample and independent sample t tests were used for statistical comparisons. Comparisons of the before-treatment and after-retention measurements showed that the arch widths and buccolingual inclinations of the posterior teeth increased significantly on the crossbite side of the maxilla and on the noncrossbite side of the mandible (P <0.05). Comparison of the 2 sides showed statistically significant differences in both the maxilla and the mandible (P <0.05). After ARME treatment, the crossbite side of the maxilla and the noncrossbite side of the mandible were more affected than were the opposite sides. Copyright © 2015. Published by Elsevier Inc.

Adaptation of the muscles of mastication to the flat skull feature in the polar bear (Ursus maritimus).

PubMed

Sasaki, M; Endo, H; Yamagiwa, D; Takagi, H; Arishima, K; Makita, T; Hayashi, Y

2000-01-01

The muscles of mastication of the polar bear (Ursus maritimus) and those of the brown bear (U. arctos) were examined by anatomical approach. In addition, the examination of the skull was carried out in the polar bear, brown bear and giant panda (Ailuropoda melanoleuca). In the polar bear, the rostro-ventral part of the superficial layer of the M. masseter possessed the abundant fleshy portion folded in the rostral and lateral directions like an accordion. Moreover, the rostro-medial area of the superficial layer became hollow in the nuchal direction when the mouth was closed. The M. temporalis of the polar bear covered up the anterior border of the coronoid process of the mandible and occupied the almost entire area of the cranial surface. The M. pterygoideus medialis of the polar bear was inserted on the ventral border of the mandible and on the ventral part of the temporal bone more widely than that of the brown bear. As results of our measurements of the mandible, an effect of the leverage in the polar bear was the smallest in three species. In the polar bear, the skull was flat, and the space between zygomatic arch and ventral border of the mandible, occupied by the M. masseter was the narrowest. It is suggested that the muscles of mastication of the polar bear is adapted to the flat skull feature for supplementing the functions.

Expression of caveolin-1 in the early phase of beta-TCP implanted in dog mandible.

PubMed

Chou, Cherng-Tzeh; Bhawal, Ujjal K; Watanabe, Nobuyuki; Kuboyama, Noboru; Chang, Wei-Jen; Lee, Sheng-Yang; Abiko, Yoshimitsu

2013-07-01

Caveolin is an essential and signature protein of caveolae. Caveolin-1 participates in signal transduction processes by acting as a scaffolding protein that concentrates, organizes and functional regulates signalling molecules within caveolar membranes. Beta-tricalcium phosphate (β-TCP) has been widely used for scaffold in tissue engineering due to its high biodegradability, osteoconductivity, easy manipulation, and lack of histotoxicity. To better understand the role of caveolin-1 in bone homeostasis and response to β-TCP scaffold, β-TCP was implanted into the dog mandible defects in beagle dogs, and gene expression profiles were examined focused on the molecular components involved in caveolin-1 regulation. Here we showed the quantitative imageology analysis characterized using in vivo micro-computed tomography (CT) images at 4 and 7 days after β-TCP implanted in dog mandibles. The bone reformation by using the β-TCP scaffolds began within 4 days of surgery, and was healing well at 7 days after surgery. Higher mRNA level of caveolin-1 was observed in β-TCP-implanted Beagle dog mandibles compared with controls at day 4 and day 7 post-surgery. The enhancement of caveolin-1 by β-TCP was further confirmed by immunohistochemistry and immunofluorescence analysis. We further revealed increased Smad7 and Phospho Stat3 expression in β-TCP-implanted specimens. Taken together, these results suggest that the enhancement of caveolin-1 play an important role in accelerating bone formation by β-TCP. Copyright © 2013 Wiley Periodicals, Inc.

The pediatric mandible: II. Management of traumatic injury or fracture.

PubMed

Smartt, James M; Low, David W; Bartlett, Scott P

2005-08-01

After studying this article, the participant should be able to: 1. Describe the changing epidemiology of mandibular fractures in children and adolescents. 2. Discuss the appropriate use of internal fixation in the treatment of pediatric mandibular fractures. 3. Describe the difficulties posed by the deciduous dentition in the use of interdental wiring. 4. Understand reasons why techniques specific to adult fractures may not be applicable to the growing mandible. 5. Understand the etiology and epidemiology of pediatric mandibular fractures. 6. Understand the reasons for conservative (closed) versus aggressive (open) treatment of mandibular injury. Fractures of the pediatric mandible are complicated by the anatomic complexity of the developing mandible, particularly by the presence of tooth buds and the eruption of deciduous and permanent teeth. Traditional methods of fracture reduction and fixation employed in adults have little applicability in the pediatric population. The authors describe the surgical techniques that have been used at their institution and those that can be used safely in the pediatric setting. In most cases, "conservative" management is the preferred option, especially in the treatment of condylar fractures. In cases requiring surgical intervention, interdental wiring, drop wires in combination with circummandibular wires, and acrylic splints are suited well to specific phases of dental maturation. Open reduction and internal fixation using monocortical screws and microplates or resorbable plates and screws are acceptable techniques in the pediatric patient, but they require special safeguards. Algorithms are presented to simplify management of these complicated injuries.

[Influence of trabecular microstructure modeling on finite element analysis of dental implant].

PubMed

Shen, M J; Wang, G G; Zhu, X H; Ding, X

2016-09-01

To analyze the influence of trabecular microstructure modeling on the biomechanical distribution of implant-bone interface with a three-dimensional finite element mandible model of trabecular structure. Dental implants were embeded in the mandibles of a beagle dog. After three months of the implant installation, the mandibles with dental implants were harvested and scaned by micro-CT and cone-beam CT. Two three-dimensional finite element mandible models, trabecular microstructure(precise model) and macrostructure(simplified model), were built. The values of stress and strain of implant-bone interface were calculated using the software of Ansys 14.0. Compared with the simplified model, the precise models' average values of the implant bone interface stress increased obviously and its maximum values did not change greatly. The maximum values of quivalent stress of the precise models were 80% and 110% of the simplified model and the average values were 170% and 290% of simplified model. The maximum and average values of equivalent strain of precise models were obviously decreased, and the maximum values of the equivalent effect strain were 17% and 26% of simplified model and the average ones were 21% and 16% of simplified model respectively. Stress and strain concentrations at implant-bone interface were obvious in the simplified model. However, the distributions of stress and strain were uniform in the precise model. The precise model has significant effect on the distribution of stress and strain at implant-bone interface.

The accuracy of ultrashort echo time MRI sequences for medical additive manufacturing.

PubMed

van Eijnatten, Maureen; Rijkhorst, Erik-Jan; Hofman, Mark; Forouzanfar, Tymour; Wolff, Jan

2016-01-01

Additively manufactured bone models, implants and drill guides are becoming increasingly popular amongst maxillofacial surgeons and dentists. To date, such constructs are commonly manufactured using CT technology that induces ionizing radiation. Recently, ultrashort echo time (UTE) MRI sequences have been developed that allow radiation-free imaging of facial bones. The aim of the present study was to assess the feasibility of UTE MRI sequences for medical additive manufacturing (AM). Three morphologically different dry human mandibles were scanned using a CT and MRI scanner. Additionally, optical scans of all three mandibles were made to acquire a "gold standard". All CT and MRI scans were converted into Standard Tessellation Language (STL) models and geometrically compared with the gold standard. To quantify the accuracy of the AM process, the CT, MRI and gold-standard STL models of one of the mandibles were additively manufactured, optically scanned and compared with the original gold-standard STL model. Geometric differences between all three CT-derived STL models and the gold standard were <1.0 mm. All three MRI-derived STL models generally presented deviations <1.5 mm in the symphyseal and mandibular area. The AM process introduced minor deviations of <0.5 mm. This study demonstrates that MRI using UTE sequences is a feasible alternative to CT in generating STL models of the mandible and would therefore be suitable for surgical planning and AM. Further in vivo studies are necessary to assess the usability of UTE MRI sequences in clinical settings.

Mechanisms regulating nutrition-dependent developmental plasticity through organ-specific effects in insects

PubMed Central

Koyama, Takashi; Mendes, Cláudia C.; Mirth, Christen K.

2013-01-01

Nutrition, via the insulin/insulin-like growth factor (IIS)/Target of Rapamycin (TOR) signaling pathway, can provide a strong molding force for determining animal size and shape. For instance, nutrition induces a disproportionate increase in the size of male horns in dung and rhinoceros beetles, or mandibles in staghorn or horned flour beetles, relative to body size. In these species, well-fed male larvae produce adults with greatly enlarged horns or mandibles, whereas males that are starved or poorly fed as larvae bear much more modest appendages. Changes in IIS/TOR signaling plays a key role in appendage development by regulating growth in the horn and mandible primordia. In contrast, changes in the IIS/TOR pathway produce minimal effects on the size of other adult structures, such as the male genitalia in fruit flies and dung beetles. The horn, mandible and genitalia illustrate that although all tissues are exposed to the same hormonal environment within the larval body, the extent to which insulin can induce growth is organ specific. In addition, the IIS/TOR pathway affects body size and shape by controlling production of metamorphic hormones important for regulating developmental timing, like the steroid molting hormone ecdysone and sesquiterpenoid hormone juvenile hormone. In this review, we discuss recent results from Drosophila and other insects that highlight mechanisms allowing tissues to differ in their sensitivity to IIS/TOR and the potential consequences of these differences on body size and shape. PMID:24133450

Age-related new bone formation following the use of cancellous bone-block allografts for reconstruction of atrophic alveolar ridges.

PubMed

Nissan, Joseph; Kolerman, Roni; Chaushu, Liat; Vered, Marilena; Naishlos, Sarit; Chaushu, Gavriel

2018-02-01

An age-related decrease in the number of osteogenic progenitor cells may compromise bone augmentation. Histomorphometrical assessment of age-related new bone formation, following atrophic alveolar ridge reconstruction, using cancellous bone-block allografts. Ninety-three consecutive patients (58 females and 35 males) were referred for implant-supported restoration of 122 severe atrophic alveolar ridges. Alveolar ridge deficiency locations were classified as anterior maxilla (n = 58), posterior maxilla (n= 32), and posterior mandible (n = 32). A bony deficiency of at least 3 mm horizontally and up to 3 mm vertically according to computerized tomography (CT) in the posterior mandible and anterior maxilla, served as inclusion criteria. In the posterior maxilla, a residual alveolar ridge up to 4 mm vertically according to CT served as inclusion criteria. Augmentation was performed by the use of cancellous bone-block allografts. Bone biopsies (9-month posterior maxilla, 4 months anterior maxilla and posterior mandible) of young (≤40 years) versus older (>40 years) patients were histomorphometrically evaluated. In the posterior maxilla, no statistically significant histomorphometric differences were noted. While at the anterior maxilla and posterior mandible, statistically significant more newly formed bone was found in young versus older individuals, respectively (38.6% vs 19.8%, P = 0.04 and 69% vs 31%, P = .05). New bone formation following residual alveolar ridge bone grafting is age-related. Longer bone consolidation and healing time may be recommended for older individuals. © 2017 Wiley Periodicals, Inc.

Osteoporosis prediction from the mandible using cone-beam computed tomography

PubMed Central

Al Haffar, Iyad; Khattab, Razan

2014-01-01

Purpose This study aimed to evaluate the use of dental cone-beam computed tomography (CBCT) in the diagnosis of osteoporosis among menopausal and postmenopausal women by using only a CBCT viewer program. Materials and Methods Thirty-eight menopausal and postmenopausal women who underwent dual-energy X-ray absorptiometry (DXA) examination for hip and lumbar vertebrae were scanned using CBCT (field of view: 13 cm×15 cm; voxel size: 0.25 mm). Slices from the body of the mandible as well as the ramus were selected and some CBCT-derived variables, such as radiographic density (RD) as gray values, were calculated as gray values. Pearson's correlation, one-way analysis of variance (ANOVA), and accuracy (sensitivity and specificity) evaluation based on linear and logistic regression were performed to choose the variable that best correlated with the lumbar and femoral neck T-scores. Results RD of the whole bone area of the mandible was the variable that best correlated with and predicted both the femoral neck and the lumbar vertebrae T-scores; further, Pearson's correlation coefficients were 0.5/0.6 (p value=0.037/0.009). The sensitivity, specificity, and accuracy based on the logistic regression were 50%, 88.9%, and 78.4%, respectively, for the femoral neck, and 46.2%, 91.3%, and 75%, respectively, for the lumbar vertebrae. Conclusion Lumbar vertebrae and femoral neck osteoporosis can be predicted with high accuracy from the RD value of the body of the mandible by using a CBCT viewer program. PMID:25473633

Mandibular effects of maxillary distraction osteogenesis in cleft lip and palate.

PubMed

Doucet, J-C; Herlin, C; Bigorre, M; Bäumler, C; Subsol, G; Captier, G

2014-06-01

Maxillary distraction osteogenesis (DO) is a reliable treatment for severe maxillary deficiency in cleft lip and palate (CLP). The objective was to analyze its long-term effects on the mandible. A retrospective study of 24 CLP treated with maxillary DO using the Polley and Figueroa technique was done; patients were followed for more than 4 years. Preoperative (T0), 6-12 months postoperative (T1), and ≥ 4 years postoperative (T2) cephalometric radiographs were evaluated. A classical cephalometric analysis was used to assess treatment stability, and a Procrustes superimposition method was used to assess local changes in the shape of the mandible. The mean age of patients at T0 was 15.4 ± 4.1 years. SNA increased at T1 and T2 (P < 0.001), with no significant relapse between T1 and T2, indicating stability at 1 year after treatment (T0 = 72.4 ± 5.3°; T1 = 81.3 ± 6.2°; T2 = 79.9 ± 6.1°). SNB, facial angle, gonial angle, and symphyseal angle remained stable. Long-term analysis of the mandible demonstrated a minimal counter-clockwise rotation of the body (mandibular plane = -0.2 ± 3.2°) and ramus (-0.6 ± 4.3°). Maxillary DO in CLP had no significant effect on the shape or rotation of the mandible. The maxillary advancement remained stable after 1 year. Copyright © 2014 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Scaling of chew cycle duration in primates.

PubMed

Ross, Callum F; Reed, David A; Washington, Rhyan L; Eckhardt, Alison; Anapol, Fred; Shahnoor, Nazima

2009-01-01

The biomechanical determinants of the scaling of chew cycle duration are important components of models of primate feeding systems at all levels, from the neuromechanical to the ecological. Chew cycle durations were estimated in 35 species of primates and analyzed in conjunction with data on morphological variables of the feeding system estimating moment of inertia of the mandible and force production capacity of the chewing muscles. Data on scaling of primate chew cycle duration were compared with the predictions of simple pendulum and forced mass-spring system models of the feeding system. The gravity-driven pendulum model best predicts the observed cycle duration scaling but is rejected as biomechanically unrealistic. The forced mass-spring model predicts larger increases in chew cycle duration with size than observed, but provides reasonable predictions of cycle duration scaling. We hypothesize that intrinsic properties of the muscles predict spring-like behavior of the jaw elevator muscles during opening and fast close phases of the jaw cycle and that modulation of stiffness by the central nervous system leads to spring-like properties during the slow close/power stroke phase. Strepsirrhines show no predictable relationship between chew cycle duration and jaw length. Anthropoids have longer chew cycle durations than nonprimate mammals with similar mandible lengths, possibly due to their enlarged symphyses, which increase the moment of inertia of the mandible. Deviations from general scaling trends suggest that both scaling of the jaw muscles and the inertial properties of the mandible are important in determining the scaling of chew cycle duration in primates.

Fixation of fractures of the condylar head of the mandible with a new magnesium-alloy biodegradable cannulated headless bone screw.

PubMed

Leonhardt, H; Franke, A; McLeod, N M H; Lauer, G; Nowak, A

2017-07-01

It is difficult to fix fractures of the condylar head of the mandible. Several techniques have been described which show satisfactory outcomes, but stability can be questionable, and some can cause irritation of the soft tissues. We describe a technique and first results of treating such fractures with resorbable magnesium-based headless bone screws (Magnezix ® 2.7mm CS; Syntellix AG, Hanover, Germany). Copyright © 2017 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

[Proprioceptive sensitivity and orofacial functions].

PubMed

Auriol, M; Coutand, A; Crinetz, V; Chomette, G; Doumit, A; Lucht, M

1985-01-01

Proprioceptive sensibility from stimulation of muscle, ligament articular and vestibular receptors plays a determining role in the regulation of tone, of the resting position of the mandible, of head posture and of the closure pathway of the mandible. Studies conducted on temporomandibular joints of fetuses and adult subjects failed to demonstrate the specialized corpuscles (a fact previously noted by Ramfjord) in the temporomaxillary joint capsule, described typically in other joints. In contrast, however, histology showed a particularly rich population of muscle receptors adjacent to this joint, this being only one of several particular characteristics.

Principles of pediatric mandibular fracture management.

PubMed

Cole, Patrick; Kaufman, Yoav; Izaddoost, Shayan; Hatef, Daniel A; Hollier, Larry

2009-03-01

Mandible fractures are commonplace in today's craniofacial practice; however, managing the infrequent, operative pediatric mandible injury requires a thorough knowledge base and thoughtful approach. Not only do these patients demonstrate variable anatomy due to differing stages of dental eruption, but condylar disruption may translate into long-term growth disturbance. In addition, patient immaturity often complicates cooperation, and both fixation strategies and postoperative planning must take this into account. As a supplement to the authors' video presentation, the present article focuses on repair of the symphyseal fracture and bilateral condylar injuries in the pediatric patient.

Fusions within the mandible of the domestic fowl (Gallus gallus domesticus).

PubMed Central

Hogg, D A

1983-01-01

The articulations formed within the mandible of the domestic fowl by its constituent elements have been described and illustrated. The sutures identified were suturae angulosplenialis, angulosupra-angularis, articulare/pre-articulo-angularis, articulare/pre-articulosupra-angularis, dento-angularis, dentosplenialis, dentosupra-angularis and supra-angulosplenialis. Some degree of fusion was found to occur in all sutures except sutura supra-angulosplenialis. The range of fusion time and mean fusion time for each site was studied in a flock of Golden Comet pullets. Mean fusion times varied from 45-119 days post-hatching. PMID:6885616

Fusions within the mandible of the domestic fowl (Gallus gallus domesticus).

PubMed

Hogg, D A

1983-05-01

The articulations formed within the mandible of the domestic fowl by its constituent elements have been described and illustrated. The sutures identified were suturae angulosplenialis, angulosupra-angularis, articulare/pre-articulo-angularis, articulare/pre-articulosupra-angularis, dento-angularis, dentosplenialis, dentosupra-angularis and supra-angulosplenialis. Some degree of fusion was found to occur in all sutures except sutura supra-angulosplenialis. The range of fusion time and mean fusion time for each site was studied in a flock of Golden Comet pullets. Mean fusion times varied from 45-119 days post-hatching.

Technical report: precisely fitting bars on implants in five steps-a CAD/CAM concept for the edentulous mandible.

PubMed

Beuer, Florian; Schweiger, Josef; Huber, Martin; Engels, Jörg; Stimmelmayr, Michael

2014-06-01

Various treatment concepts have been presented for the edentulous mandible. Manufacturing tension-free and precisely fitting bars on dental implants was previously a great challenge in prosthetic dentistry and required great effort. Modern computer aided design/computer aided manufacturing technology in combination with some clinical modifications of the established workflow enables the clinician to achieve precise results in a very efficient way. The innovative five-step concept is presented in a clinical case. © 2014 by the American College of Prosthodontists.

En bloc resection of huge cemento-ossifying fibroma of mandible: avoiding lower lip split incision.

PubMed

Ayub, Tahera; Katpar, Shahjahan; Shafique, Salman; Mirza, Talat

2011-05-01

Cemento-ossifying Fibroma (COF) is an osteogenic benign neoplasm affecting the jaws and other craniofacial bones. It commonly presents as a progressively slow growing pathology, which can sometimes attain an enormous size, causing facial deformity. A case of a huge cemento-ossifying fibroma, appearing as a mandibular dumbell tumour in a male patient is documented, which caused massive bone destruction and deformity. It was surgically removed by performing en bloc resection of mandible avoiding the splitting of lower lip incision technique, thereby maintaining his normal facial appearance.

Cemento-ossifying fibroma of the mandible. A clinicopathological report.

PubMed

Bala, Tapas K; Soni, Sarmeshta; Dayal, Prakriti; Ghosh, Indrajeet

2017-05-01

Cemento-ossifying fibromas are rare fibro-osseous benign neoplasms that affect the jaws. They are included in the group of mesodermal odontogenic tumors and commonly present as a progressively growing lesion that might attain enormous size with resultant deformity, if left untreated. A confusion prevails on the terminology, which can only be confirmed by histopathologic evaluation. A case of cemento-ossifying fibroma involving the right mandible is described in a 30 year-old female patient. The clinical, radiographic, histologic features are presented and the various differential diagnosis are discussed.

Cemento-ossifying fibroma of the mandible

PubMed Central

Bala, Tapas K.; Soni, Sarmeshta; Dayal, Prakriti; Ghosh, Indrajeet

2017-01-01

Cemento-ossifying fibromas are rare fibro-osseous benign neoplasms that affect the jaws. They are included in the group of mesodermal odontogenic tumors and commonly present as a progressively growing lesion that might attain enormous size with resultant deformity, if left untreated. A confusion prevails on the terminology, which can only be confirmed by histopathologic evaluation. A case of cemento-ossifying fibroma involving the right mandible is described in a 30 year-old female patient. The clinical, radiographic, histologic features are presented and the various differential diagnosis are discussed. PMID:28439606

High-frequency 3D echodentographic imaging modality for early assessment of periodontal diseases: in vitro study

NASA Astrophysics Data System (ADS)

Mahmoud, Ahmed M.; Ngan, Peter; Crout, Richard; Mukdadi, Osama M.

2009-02-01

The use of ultrasound in dentistry is still an open growing area of research. Currently, there is a lack of imaging modalities to accurately predict minute structures and defects in the jawbone. In particular, the inability of 2D radiographic images to detect bony periodontal defects resulted from infection of the periodontium. This study investigates the feasibility of high frequency ultrasound to reconstruct high resolution 3D surface images of human jawbone. Methods: A dentate and non-dentate mandibles were used in this study. The system employs high frequency single-element ultrasound focused transducers (15-30 MHz) for scanning. Continuous acquisition using a 1 GHz data acquisition card is synchronized with a high precision two-dimensional stage positioning system of +/-1 μm resolution for acquiring accurate and quantitative measurements of the mandible in vitro. Radio frequency (RF) signals are acquired laterally 44-45.5 μm apart for each frame. Different frames are reconstructed 500 μm apart for the 3D reconstruction. Signal processing algorithms are applied on the received ultrasound signals for filtering, focusing, and envelope detection before frame reconstruction. Furthermore, an edge detection technique is adopted to detect the bone surface in each frame. Finally, all edges are combined together in order to render a 3D surface image of the jawbone. Major anatomical landmarks on the resultant images were confirmed with the anatomical structures on the mandibles to show the efficacy of the system. Comparison were also made with conventional 2D radiographs to show the superiority of the ultrasound imaging system in diagnosing small defects in the lateral, axial and elevation planes of space. Results: The landmarks on all ultrasound images matched with those on the mandible, indicating the efficacy of the system in detecting small structures in human jaw bones. Comparison with conventional 2D radiographic images of the same mandible showed superiority of the 3D ultrasound images in detecting defects in the elevation plane of space. These results suggest that the high frequency ultrasound system shows great potential in providing a non-invasive method to characterize the jawbone and detect periodontal diseases at earlier stages.

Quantitative and qualitative assessment of anchorage loss during en-masse retraction with indirectly loaded miniscrews in patients with bimaxillary protrusion.

PubMed

Monga, Nitika; Kharbanda, Om Prakash; Samrit, Vilas

2016-08-01

This study provides vital insight in assessing anchorage loss when miniscrews are indirectly loaded. The study sample comprised 18 patients with bimaxillary protrusion (14 girls, 4 boys; mean age, 17.3 ± 4.6 years) selected from a database of 89 patients treated with miniscrews. All subjects who were selected required extraction of all first premolars and maximum anchorage. After initial leveling and aligning, miniscrews were placed between the first molar and the second premolar in all 4 quadrants and loaded by the indirect method at 3 weeks after placement with 200-g nickel-titanium alloy closed-coil springs for en-masse retraction. Mean treatment duration was 29.7 ± 6.8 months. Pretreatment and posttreatment lateral cephalograms were analyzed to measure the amount of anchorage loss, incisor retraction, and the incisors' angular change in reference to the pterygoid vertical reference line and were evaluated by the structural superimposition method. The ratio of incisor retraction to molar protraction was 4.2 in the maxilla and 4.7 in the mandible. The first molars showed mean extrusion of 0.20 mm in the maxilla and 0.57 mm in the mandible; these were statistically insignificant. The mean angular change of the first molars was -2.43° in the maxilla and -0.03° in the mandible. The mean anchorage loss in reference to the pterygoid vertical was 1.3 mm in the maxilla and 1.1 mm in the mandible; these were statistically significant. Structural superimpositions showed mean change in molar position of 0.83 mm in the maxilla and 0.87 mm in the mandible, and 5.77 mm in the maxillary incisor and 5.43 mm in the mandibular incisor. These results were compared with the direct anchorage method reported in the literature. Indirect miniscrew anchorage can be a viable alternative to direct anchorage. Copyright © 2016. Published by Elsevier Inc.

Immediate and early function of Brånemark System implants placed in the esthetic zone: a 1-year prospective clinical multicenter study.

PubMed

Maló, Paulo; Friberg, Bertil; Polizzi, Giovanni; Gualini, Federico; Vighagen, Torbjörn; Rangert, Bo

2003-01-01

Immediate/early implant function means great benefits for patients and therapists because treatment time and cost can be substantially reduced. This concept has become an accepted alternative for complete arch fixed restorations in the mandible, and clinical documentation is emerging for other indications. The purpose of this prospective clinical multicenter study was to evaluate the outcome of implants placed in incisor, canine, and premolar regions in maxillas or mandibles. Implants were loaded with provisional crowns and bridges on the same day or within a few days and were followed up for 1 year during function. Four centers treated 76 patients each in need of an implant-retained prosthesis in the anterior and premolar regions in the maxilla or mandible. A total of 116 titanium implants with machined surfaces (Brånemark System , Nobel Biocare AB, Gothenburg, Sweden) were placed: 74 in maxillas and 42 in mandibles. Eighty-seven prostheses were made, of which 63 were single crowns and 24 were bridges (supported by 53 splinted implants). Twenty-two implants in 14 patients were placed in fresh extraction sites. The goal with the preparation and insertion technique was to achieve good primary implant stability and a minimum implant insertion torque of 30 Ncm before the implant was completely seated. The occlusion was adjusted to eliminate direct contact with the provisional prostheses. After 6 months, the patients received their permanent prostheses. Sixty-seven patients were followed for 1 year. Five implants were lost in five patients, three in the maxilla and two in the mandible. Four of the lost implants were single-tooth replacements and one was splinted. The cumulative survival rate (CSR) was 95.7% for all implants after 1 year and 93.7% and 98.1% for single-tooth and splinted implants, respectively. There were no implant losses in the extraction sites. The CSR of 96% at 1 year indicates that immediate function of Brånemark System implants placed in incisor to premolar regions in both jaws is a viable concept. More failures occurred with single-tooth replacements (6.3%) than with splinted implants (1.9%).

Variation in arterial supply to the floor of the mouth and assessment of relative hemorrhage risk in implant surgery.

PubMed

Katsumi, Yuji; Tanaka, Ray; Hayashi, Takafumi; Koga, Taketo; Takagi, Ritsuo; Ohshima, Hayato

2013-04-01

Bleeding in the floor of the mouth during implant surgery is attributed to arterial injuries in the sublingual space: clinicians may injure the submental and sublingual arteries, which originate from the facial and lingual arteries, respectively. This study aimed to clarify the three-dimensional courses of submental and sublingual arteries and their topographic relation to the mandible. During the gross anatomy course at the Faculty of Dentistry and Graduate School, Niigata University (2009-2011), we investigated the relationship between the courses of submental and sublingual arteries and their dividing patterns of the mylohyoid muscle, sublingual gland, and mandible using 27 human cadavers. The courses of submental and sublingual arteries were divided into four patterns: (1) the sublingual space was supplied by the sublingual artery (type I: 63%), (2) it was supplied by both the sublingual and submental arteries (type II: 5.6%), (3) it was supplied by the submental artery without the sublingual artery (type III: 29.6%), and (4) type III without the deep lingual artery originated from the lingual artery (type IV: 1.8%). In type II, III, and IV, the submental artery perforates the mylohyoid muscle or takes a roundabout route to travel near the surface of the mandible. The percentage occurrence of arteries traveling between the sublingual gland and mandible in type II, III, and IV (55%) is higher than that in type I (8.8%). Susceptibility of the submental artery in type II, III, and IV to injury during implant surgery is suggested. © 2011 John Wiley & Sons A/S.

Chromosomal rearrangements, phenotypic variation and modularity: a case study from a contact zone between house mouse Robertsonian races in Central Italy.

PubMed

Franchini, Paolo; Colangelo, Paolo; Meyer, Axel; Fruciano, Carmelo

2016-03-01

The Western European house mouse, Mus musculus domesticus, is well-known for the high frequency of Robertsonian fusions that have rapidly produced more than 50 karyotipic races, making it an ideal model for studying the mechanisms of chromosomal speciation. The mouse mandible is one of the traits studied most intensively to investigate the effect of Robertsonian fusions on phenotypic variation within and between populations. This complex bone structure has also been widely used to study the level of integration between different morphogenetic units. Here, with the aim of testing the effect of different karyotypic assets on the morphology of the mouse mandible and on its level of modularity, we performed morphometric analyses of mice from a contact area between two highly metacentric races in Central Italy. We found no difference in size, while the mandible shape was found to be different between the two Robertsonian races, even after accounting for the genetic relationships among individuals and geographic proximity. Our results support the existence of two modules that indicate a certain degree of evolutionary independence, but no difference in the strength of modularity between chromosomal races. Moreover, the ascending ramus showed more pronounced interpopulation/race phenotypic differences than the alveolar region, an effect that could be associated to their different polygenic architecture. This study suggests that chromosomal rearrangements play a role in the house mouse phenotypic divergence, and that the two modules of the mouse mandible are differentially affected by environmental factors and genetic makeup.

The morphology of the mandibular coronoid process does not indicate that Canis lupus chanco is the progenitor to dogs.

PubMed

Janssens, Luc; Miller, Rebecca; Van Dongen, Stefan

The domestication of wolves is currently under debate. Where, when and from which wolf sub-species dogs originated are being investigated both by osteoarchaeologists and geneticists. While DNA research is rapidly becoming more active and popular, morphological methods have been the gold standard in the past. But even today morphological details are routinely employed to discern archaeological wolves from dogs. One such morphological similarity between Canis lupus chanco and dogs was published in 1977 by Olsen and Olsen. This concerns the "turned back" anatomy of the dorsal part of the vertical ramus of the mandible that was claimed to be specific to domestic dogs and Chinese wolves C . lupus chanco , and "absent from other canids". Based on this characteristic, C . lupus chanco was said to be the progenitor of Asian and American dogs, and this specific morphology has been continuously used as an argument to assign archaeological specimens, including non-Asian and non-American, to the dog clade. We challenged this statement by examining 384 dog skulls of 72 breeds and 60 skulls of four wolf sub-species. Only 20 % of dog mandibles and 80 % of C . lupus chanco showed the specific anatomy. In addition, 12 % of Canis lupus pallipes mandibles showed the "turned back" morphology. It can be concluded that the shape of the coronoid process of the mandible cannot be used as a morphological trait to determine whether a specimen belongs to a dog or as an argument in favour of chanco as the progenitor to dogs.

Evaluation of Mandibular Anatomy Associated With Bad Splits in Sagittal Split Ramus Osteotomy of Mandible.

PubMed

Wang, Tongyue; Han, Jeong Joon; Oh, Hee-Kyun; Park, Hong-Ju; Jung, Seunggon; Park, Yeong-Joon; Kook, Min-Suk

2016-07-01

This study aimed to identify risk factors associated with bad splits during sagittal split ramus osteotomy by using three-dimensional computed tomography. This study included 8 bad splits and 47 normal patients without bad splits. Mandibular anatomic parameters related to osteotomy line were measured. These included anteroposterior width of the ramus at level of lingula, distance between external oblique ridge and lingula, distance between sigmoid notch and inferior border of mandible, mandibular angle, distance between inferior outer surface of mandibular canal and inferior border of mandible under distal root of second molar (MCEM), buccolingual thickness of the ramus at level of lingula, and buccolingual thickness of the area just distal to first molar (BTM1) and second molar (BTM2). The incidence of bad splits in 625 sagittal split osteotomies was 1.28%. Compared with normal group, bad split group exhibited significantly thinner BTM2 and shorter sigmoid notch and inferior border of mandible (P <0.05). However, for BTM1 and buccolingual thickness of the ramus at level of lingula, there was no statistical difference between the 2 groups. Mandibular angle, anteroposterior width of the ramus at level of lingula, external oblique ridge and lingula, and MCEM were not significantly different between the groups. This study suggests that patients with shorter ramus and low thickness of the buccolingual alveolar region distal to the second molar had a higher risk of bad splits. These anatomic data may help surgeons to choose the safest surgical techniques and best osteotomy sites.

3D visualization and quantification of bone and teeth mineralization for the study of osteo/dentinogenesis in mice models

NASA Astrophysics Data System (ADS)

Marchadier, A.; Vidal, C.; Ordureau, S.; Lédée, R.; Léger, C.; Young, M.; Goldberg, M.

2011-03-01

Research on bone and teeth mineralization in animal models is critical for understanding human pathologies. Genetically modified mice represent highly valuable models for the study of osteo/dentinogenesis defects and osteoporosis. Current investigations on mice dental and skeletal phenotype use destructive and time consuming methods such as histology and scanning microscopy. Micro-CT imaging is quicker and provides high resolution qualitative phenotypic description. However reliable quantification of mineralization processes in mouse bone and teeth are still lacking. We have established novel CT imaging-based software for accurate qualitative and quantitative analysis of mouse mandibular bone and molars. Data were obtained from mandibles of mice lacking the Fibromodulin gene which is involved in mineralization processes. Mandibles were imaged with a micro-CT originally devoted to industrial applications (Viscom, X8060 NDT). 3D advanced visualization was performed using the VoxBox software (UsefulProgress) with ray casting algorithms. Comparison between control and defective mice mandibles was made by applying the same transfer function for each 3D data, thus allowing to detect shape, colour and density discrepencies. The 2D images of transverse slices of mandible and teeth were similar and even more accurate than those obtained with scanning electron microscopy. Image processing of the molars allowed the 3D reconstruction of the pulp chamber, providing a unique tool for the quantitative evaluation of dentinogenesis. This new method is highly powerful for the study of oro-facial mineralizations defects in mice models, complementary and even competitive to current histological and scanning microscopy appoaches.

Regenerate Healing Outcomes in Unilateral Mandibular Distraction Osteogenesis Using Quantitative Histomorphometry

PubMed Central

Schwarz, Daniel A.; Arman, Krikor G.; Kakwan, Mehreen S.; Jamali, Ameen M.; Elmeligy, Ayman A.; Buchman, Steven R.

2015-01-01

Background The authors’ goal was to ascertain regenerate bone-healing metrics using quantitative histomorphometry at a single consolidation period. Methods Rats underwent either mandibular distraction osteogenesis (n=7) or partially reduced fractures (n=7); their contralateral mandibles were used as controls (n=11). External fixators were secured and unilateral osteotomies performed, followed by either mandibular distraction osteogenesis (4 days’ latency, then 0.3 mm every 12 hours for 8 days; 5.1 mm) or partially reduced fractures (fixed immediately postoperatively; 2.1 mm); both groups underwent 4 weeks of consolidation. After tissue processing, bone volume/tissue volume ratio, osteoid volume/tissue volume ratio, and osteocyte count per high-power field were analyzed by means of quantitative histomorphometry. Results Contralateral mandibles had statistically greater bone volume/tissue volume ratio and osteocyte count per high-power field compared with both mandibular distraction osteogenesis and partially reduced fractures by almost 50 percent, whereas osteoid volume/tissue volume ratio was statistically greater in both mandibular distraction osteogenesis specimens and partially reduced fractures compared with contralateral mandibles. No statistical difference in bone volume/tissue volume ratio, osteoid volume/tissue volume ratio, or osteocyte count per high-power field was found between mandibular distraction osteogenesis specimens and partially reduced fractures. Conclusions The authors’ findings demonstrate significantly decreased bone quantity and maturity in mandibular distraction osteogenesis specimens and partially reduced fractures compared with contralateral mandibles using the clinically analogous protocols. If these results are extrapolated clinically, treatment strategies may require modification to ensure reliable, predictable, and improved outcomes. PMID:20463629

The Role of a Conservative Minimal Interventional Management Protocol in the Fractures of the Dentate Portion of the Adult Mandible

PubMed Central

Krishnan, Balasubramanian

2015-01-01

Mandibular fractures are commonly encountered by the maxillofacial surgeon. Maxillomandibular fixation (MMF) and open reduction and internal fixation (ORIF), or a combination of both, are the accepted standard treatments. This study aims to assess the role of a conservative minimal intervention protocol in the management of undisplaced/minimally displaced fractures of the dentate portion of the adult mandible and the complications associated with such minimalistic intervention. Thirty-four patients with undisplaced/minimally displaced fractures of the dentate portion of the adult mandible were advised to restrict mouth opening and limit themselves to a soft diet for a minimum of 4 weeks. All patients were advised follow-up at regular intervals for at least 3 months. Five patients were lost to follow-up. Symphysis and parasymphysis fractures were the most common fracture locations. Fourteen patients needed tension band stabilization with a mandibular arch bar/bridle wiring and three patients required extraction of luxated teeth. All patients showed satisfactory healing except three in whom additional intervention (ORIF) was performed. The improvement in mouth opening was statistically significant. Complications were seen more frequently among smokers and alcoholics. For patients with minimally displaced mandibular fractures, it is necessary to consider if the perceived benefits of intervention justify the associated added costs and possible complications. Patients have to be fully informed about the possible complications while using this minimal intervention protocol. This study concludes that a conservative minimal intervention management protocol for such fractures of the dentate portion of the mandible can produce satisfactory results. PMID:26889344

The accuracy of ultrashort echo time MRI sequences for medical additive manufacturing

PubMed Central

Rijkhorst, Erik-Jan; Hofman, Mark; Forouzanfar, Tymour; Wolff, Jan

2016-01-01

Objectives: Additively manufactured bone models, implants and drill guides are becoming increasingly popular amongst maxillofacial surgeons and dentists. To date, such constructs are commonly manufactured using CT technology that induces ionizing radiation. Recently, ultrashort echo time (UTE) MRI sequences have been developed that allow radiation-free imaging of facial bones. The aim of the present study was to assess the feasibility of UTE MRI sequences for medical additive manufacturing (AM). Methods: Three morphologically different dry human mandibles were scanned using a CT and MRI scanner. Additionally, optical scans of all three mandibles were made to acquire a “gold standard”. All CT and MRI scans were converted into Standard Tessellation Language (STL) models and geometrically compared with the gold standard. To quantify the accuracy of the AM process, the CT, MRI and gold-standard STL models of one of the mandibles were additively manufactured, optically scanned and compared with the original gold-standard STL model. Results: Geometric differences between all three CT-derived STL models and the gold standard were <1.0 mm. All three MRI-derived STL models generally presented deviations <1.5 mm in the symphyseal and mandibular area. The AM process introduced minor deviations of <0.5 mm. Conclusions: This study demonstrates that MRI using UTE sequences is a feasible alternative to CT in generating STL models of the mandible and would therefore be suitable for surgical planning and AM. Further in vivo studies are necessary to assess the usability of UTE MRI sequences in clinical settings. PMID:26943179

Analysis of complications following augmentation with cancellous block allografts.

PubMed

Chaushu, Gavriel; Mardinger, Ofer; Peleg, Michael; Ghelfan, Oded; Nissan, Joseph

2010-12-01

Bone grafting may be associated with soft and hard tissue complications. Recipient site complications encountered using cancellous block allografts for ridge augmentation are analyzed. A total of 101 consecutive patients (62 females and 39 males; mean age 44 ± 17 years) were treated with implant-supported restoration of 137 severe atrophic alveolar ridges augmented with cancellous bone-block allografts. Alveolar ridge deficiency locations were classified as anterior maxilla (n = 58); posterior maxilla (n = 32 sinuses); posterior mandible (n = 32); and anterior mandible (n = 15). A total of 271 rough-surface implants were placed. Recipient site complications associated with block grafting (infection, membrane exposure, incision line opening, perforation of mucosa over the grafted bone, partial graft failure, total graft failure, and implant failure) were recorded. Partial and total bone-block graft failure occurred in 10 (7%) and 11 (8%) of 137 augmented sites, respectively. Implant failure rate was 12 (4.4%) of 271. Soft tissue complications included membrane exposure (42 [30.7%] of 137); incision line opening (41 [30%] of 137); and perforation of the mucosa over the grafted bone (19 [14%] of 137). Infection of the grafted site occurred in 18 (13%) of 137 bone blocks. Alveolar ridge deficiency location had a statistically significant effect on the outcome of recipient site complications. More complications were noted in the mandible compared to the maxilla. Age and gender had no statistically significant effect. Failures caused by complications were rarely noted in association with cancellous block grafting. The incidence of complications in the mandible was significantly higher. Soft tissue complications do not necessarily result in total loss of cancellous block allograft.

Surgical Treatment for Extracapsular Condylar Fractures of the Mandible.

PubMed

Closs Ono, Maria C; de Morais, André D; Freitas, Renato da S; de Oliveira E Cruz, Gilvani A

2018-02-26

Condylar fractures are considered the most controversial mandibular fractures, regarding both the diagnosis and the treatment. With the increase in surgical indications for handling this type of fracture, it is important to discuss about the advantages and disadvantages of the several surgical approaches available. This article describes the surgical details and postoperative results of the mini-retromandibular transparotid approach for treating extracapsular condylar fractures of the mandible. In a 1-year period, 16 patients affected by extracapsular condylar fractures with surgical indication were treated with the mini-retromandibular transparotid approach. All the surgeries were executed by the same surgeon. Preoperative and postoperative details of each patient were analyzed. In the postoperatory, only 2 patients had purulent drainage in the associated fractures area and only 1 patient had paresis of the buccal branch of the facial nerve. No scar issues concerning the surgical wound were observed and reintervention was not necessary in any of the patients. The mini-retromandibular transparotid approach offers advantages and should be included as an option for the open treatment of extracapsular condylar fractures of the mandible.

The effect of range and ammunition type on fracture patterns in porcine postcranial flat bones.

PubMed

Fragkouli, Kleio; Al Hakeem, Eyad; Bulut, Ozgur; Simmons, Tal

2018-01-01

Pig half-carcasses were shot in scapulae, ribs and mandibles with either 0.243 hunting rifle using high velocity expanding ammunition (N = 30) or AK47 using full metal jacketed (FMJ) ammunition (N = 12) from a range of either 5 or 20 m. Fracture patterns related to distance of fire and ammunition type were compared on de-fleshed, macerated, and reconstructed bones. For expanding ammunition, location of fracture on ribs affected the resulting pattern. Scapulae shot from 5 m presented a comminuted pattern different from those shot from 20 m. Mandibles shot from 20 m showed a characteristic radiating pattern at entrance with the opposite ramus un-fractured; those shot from 5 m exhibited fractures to both rami. Using decision tree analysis provided accuracies of 93.8% for scapulae and 87.5% for mandibles. For FMJ, no distance dependent fracture differences were apparent in any bone. Decision tree analysis facilitated the interpretation of fracture patterns caused by projectile trauma. Copyright © 2017. Published by Elsevier Ltd.

Sub-Periosteal Dissection with Denture-Guided Epithelial Regeneration: A Novel Method for Peri-Implant Soft Tissue Management in Reconstructed Mandibles.

PubMed

Kumar, Vinay V; Jacob, P C; Kuriakose, Moni A

2016-12-01

In patients with reconstructed mandibles using free fibula flaps, management of soft tissues around implants supporting dental rehabilitation, is often a clinical problem. The aim of this paper is to describe a new technique, namely "Sub-periosteal dissection and denture-guided epithelial regeneration (SD-DGER)", as a method of peri-implant soft tissue management in these patients. The technique consists of performing a subperiosteal dissection with creation of buccal and lingual flaps. These flaps form the buccal and lingual vestibule. Implants are placed and an interim denture is immediately loaded onto the implants to guide the regenerated epithelium. A keratinized mucosal layer is formed on the bare fibula bone in six months time. This technique was successful in producing fixed keratinized epithelial tissue around implants in patients with mandibles reconstructed using the free fibula flap in patients who did not undergo radiotherapy. The sub-periosteal dissection with denture guided epithelial regeneration is a predictable form of peri-implant soft tissue management in selected patients with reconstructed jaws.

Evaluation of bone density in the mandibles of young Australian adults of Mongoloid and Caucasoid descent.

PubMed

Ong, R G; Stevenson, M R

1999-01-01

To evaluate the bone density in the mandibles of young Australian adults of Mongoloid and Caucasoid descent. A panoramic radiograph (Orthophos C, Siemens AG, Bensheim, Germany) was obtained of 79 dental students from the School of Oral Health Sciences, The University of Western Australia. Exposure factors were varied for males and females. The films were automatically processed in a single batch and the optical density measured blindly at two locations by two examiners. The optical density was compared by race and sex to detect bone density differences. Individual lifestyle habits (exercise, alcohol consumption, smoking and diet) was recorded in a self-administered questionnaire. Multiple regression analysis was used to analyse the effects of physical, environmental and medical characteristics. The Mongoloid subjects were found to have approximately 20% higher bone density at the angle of mandible than Caucasoid subjects (P = 0.0094 for males, P = 0.0004 for females). Race is the most important variable associated with bone density. Mongoloid subjects should be given a higher exposure for panoramic radiography than that normally used for Caucasoid subjects.

[The influences of the stress distribution on the condylar cartilage surface by Herbst appliance under various bite reconstruction--a three dimensional finite element analysis].

PubMed

Hu, L; Zhao, Z; Song, J; Fan, Y; Jiang, W; Chen, J

2001-02-01

The distribution of stress on the surface of condylar cartilage was investigated. Three-dimensional model of the 'Temporomandibular joint mandible Herbst appliance system' was set up by SUPER SAP software (version 9.3). On this model, various bite reconstruction was simulated according to specified advanced displacement and vertical bite opening. The distribution of maximum and minimum principal stress on the surface of condylar cartilage were computerized and analyzed. When Herbst appliance drove the mandible forward, the anterior condyle surface was compressed while the posterior surface was drawn. The trend of stress on the same point on the condyle surface was consistent in various reconstruction conditions, but the trend of stress on various point were different in same reconstruction conditions. All five groups of bite reconstruction (3-7 mm advancement, 4-2 mm vertical bite opening of the mandible) designed by this study can be selected in clinic according to the patient's capability of adaptation, the extent of malocclusion and the potential and direction of growth.

Evaluation of mandibular angle ostectomy using three-dimensional finite element analysis.

PubMed

Song, Jian; Zhu, Songsong; Luo, En; Hu, Jing; Feng, Ge

2014-07-01

This study was designed to investigate the stress and the displacement distributions of the mandible after mandibular angle ostectomy (MAO) by means of three-dimensional finite element analysis. On the basis of a female patient with a prominent angle of the mandible, the finite element models were generated by helical computed tomography and related software and were analyzed under muscle forces and 3 kinds of biting conditions, including intercuspal position (ICP), incisal clenching (INC), and right unilateral molar clenching (RMOL). The mandibular stress and displacement distributions were analyzed by Abaqus software. In the model of MAO, the increased stress and the decreased displacement was found in ICP, INC, and RMOL at the area of mandibular angle. The stress and the displacement increased in ICP and RMOL, whereas the others remained unchanged in INC at the area of mandibular condylar neck. The results of this study have shown that MAO could alter biomechanical characteristics in the operated mandible, which suggested that a greater hit on face may lead to a higher incidence rate of condyle fracture and a lower incidence rate of angle fracture after MAO.

Unexpectedly rapid evolution of mandibular shape in hominins.

PubMed

Raia, P; Boggioni, M; Carotenuto, F; Castiglione, S; Di Febbraro, M; Di Vincenzo, F; Melchionna, M; Mondanaro, A; Papini, A; Profico, A; Serio, C; Veneziano, A; Vero, V A; Rook, L; Meloro, C; Manzi, G

2018-05-09

Members of the hominins - namely the so-called 'australopiths' and the species of the genus Homo - are known to possess short and deep mandibles and relatively small incisors and canines. It is commonly assumed that this suite of traits evolved in early members of the clade in response to changing environmental conditions and increased consumption of though food items. With the emergence of Homo, the functional meaning of mandible shape variation is thought to have been weakened by technological advancements and (later) by the control over fire. In contrast to this expectation, we found that mandible shape evolution in hominins is exceptionally rapid as compared to any other primate clade, and that the direction and rate of shape change (from the ape ancestor) are no different between the australopiths and Homo. We deem several factors including the loss of honing complex, canine reduction, and the acquisition of different diets may have concurred in producing such surprisingly high evolutionary rates. This study reveals the evolution of mandibular shape in hominins has strong morpho-functional and ecological significance attached.

Central Telangiectatic Osteosarcoma of the Mandible in a Paediatric Patient: A Rarity.

PubMed

Tomar, Divya; Dhillon, Manu; Thayath, Muhamad Nishad; Zaidi, Iram; Singh, Shikha

2016-12-01

Osteosarcoma (OS) involving the head and neck region is rare and is a diagnostic challenge due to its aggressive nature and varied presentations. Although OS constitute 40% to 60% of all bone tumours, only 10% of these occur in the head and neck region, most commonly in the maxilla and mandible. OS of the jaw bone has a different pattern and behaviour when compared to OS at other anatomic location. It occurs in a more elderly population, less aggressive and usually spreads locally rather than distant metastases. Telangiectatic Osteosarcoma (TOS) of jaws in a paediatric patient is still a very rare variant and till date only two cases have been reported in literature. Radiographic evaluation plays an important role as the clinical symptoms are not specific to the condition. Conventional radiography should always be supplemented by advanced imaging modalities for the diagnosis, which gives a three dimensional assessment and also prevents superimposition of surrounding structures. Early diagnosis and radical surgery are the keys to high survival rates. Herein, we present a third ever reported case of TOS occurring in mandible of a nine-year-old male patient.

Digital reconstruction of the mandible of an adult Lesothosaurus diagnosticus with insight into the tooth replacement process and diet

PubMed Central

Knoll, Fabien; Bordy, Emese M.; de Kock, Michiel O.; Redelstorff, Ragna

2017-01-01

Fragmentary caudal ends of the left and right mandible assigned to Lesothosaurus diagnosticus, an early ornithischian, was recently discovered in the continental red bed succession of the upper Elliot Formation (Lower Jurassic) at Likhoele Mountain (Mafeteng District) in Lesotho. Using micro-CT scanning, this mandible could be digitally reconstructed in 3D. The replacement teeth within the better preserved (left) dentary were visualised. The computed tomography dataset suggests asynchronous tooth replacement in an individual identified as an adult on the basis of bone histology. Clear evidence for systematic wear facets created by attrition is lacking. The two most heavily worn teeth are only apically truncated. Our observations of this specimen as well as others do not support the high level of dental wear expected from the semi-arid palaeoenvironment in which Lesothosaurus diagnosticus lived. Accordingly, a facultative omnivorous lifestyle, where seasonality determined the availability, quality, and abundance of food is suggested. This would have allowed for adaptability to episodes of increased environmental stress. PMID:28265518

Sexual dimorphism and population variation in the adult mandible : Forensic applications of geometric morphometrics.

PubMed

Franklin, Daniel; O'Higgins, Paul; Oxnard, Charles E; Dadour, Ian

2007-03-01

This article forms part of an ongoing series of investigations designed to apply three-dimensional (3D) technology to problems in forensic anthropology. We report here on new morphometric data examining sexual dimorphism and population variation in the adult human mandible. The material is sourced from dissection hall subjects of South African and American origin consequently the sex and a statement of age are known for each individual. Thirty-eight bilateral 3D landmarks were designed and acquired using a Microscribe G2X portable digitizer. The shape analysis software morphologika (www.york.ac.uk/res/fme) is used to analyze the 3D coordinates of the landmarks. A selection of multivariate statistics is applied to visualize the pattern, and assess the significance of, shape variation between the sexes and populations. The determination of sex and identification of population affinity are two important aspects of forensic investigation. Our results indicate that the adult mandible can be used to identify both sex and population affinity with increased sensitivity and objectivity compared to standard analytical techniques.

Ecomorphology of parasite attachment: experiments with feather lice.

PubMed

Bush, Sarah E; Sohn, Edward; Clayton, Dale H

2006-02-01

The host specificity of some parasites can be reinforced by morphological specialization for attachment to mobile hosts. For example, ectoparasites with adaptations for attaching to hosts of a particular size might not be able to remain attached to larger or smaller hosts. This hypothesis is suggested by the positive correlation documented between the body sizes of many parasites and their hosts. We adopted an ecomorphological approach to test the attachment hypothesis. We tested the ability of host-specific feather lice (Phthiraptera: Ischnocera) to attach to 6 novel species of pigeons and doves that vary in size by nearly 2 orders of magnitude. Surprisingly, Rock Pigeon lice (Columbicola columbae) remained attached equally well to all 6 novel host species. We tested the relative importance of 3 factors that could facilitate louse attachment: whole-body insertion, tarsal claw use, and mandible use. Insertion, per se, was not necessary for attachment. However, insertion on coarse feathers of large hosts allowed lice to access feather barbules with their mandibles. Mandible use was a key component of attachment regardless of feather size. Attachment constraints do not appear to reinforce host specificity in this system.

Kinematics and Mechanics analysis of trap-jaw ant Odontomachus monticola

NASA Astrophysics Data System (ADS)

Hao, Wenteng; Yao, Guang; Zhang, Xiangyu; Zhang, Deyuan

2018-03-01

Trap-jaw ants of the genus Odontomachus exhibit spectacularly rapid predatory and fugitive strikes. In order to reveal the extraordinary impact resistance of the apical teeth material, we analyzed the kinematics and mechanics of the closing mandibles. Odontomachus monticola is an Odontomachus species and extensive in China. We video-recorded jaw-strikes to measure the closing velocity and acceleration. The experimental results showed that O. monticola’s mandibles closed at a highest velocity of 35.42 m/s and a highest acceleration of 750,000 m/s2 within an average duration of 0.16 ms. In addition, in order to measure the strike force, we developed an extraordinary measuring method with poly (vinylidene fluoride) (PVDF) piezoelectric film. First, the dynamic calibration of the PVDF piezoelectric film was conducted, then the calibrated piezoelectric film was struck by O. monticola. Finally, the mandible strike force was calculated according to the calibration result and the output signal. The measurements results demonstrated that the strike force ranges from 102.2 N to 235.2 N, which is impressive contrast with O. monticola’s body weight.

Clinical importance of median mandibular flexure in oral rehabilitation: a review.

PubMed

Sivaraman, K; Chopra, A; Venkatesh, S B

2016-03-01

The mandible has a property to flex inwards around the mandibular symphysis with change in shape and decrease in mandibular arch width during opening and protrusion of the mandible. The mandibular deformation may range from a few micrometres to more than 1 mm. The movement occurs because of the contraction of lateral pterygoid muscles that pulls mandibular condyles medially and causes a sagittal movement of the posterior segments. This movement of mandible can have a profound influence on prognosis and treatment outcome for various restorative, endodontics, fixed, removable and implant-related prosthesis. The review unfolds the causes, importance and clinical implications of median mandibular flexure in oral rehabilitation. This review also highlights the appropriate preventive measures and techniques that should be adopted by clinicians to minimise the effect of flexural movement of the jaw during oral rehabilitation. This would not only help clinicians to achieve a good prosthesis with accurate fit and longevity but also maintain the health of the surrounding periodontal or periimplant gingival tissues and bone. © 2015 John Wiley & Sons Ltd.

Management of fractures of the mandibular body and symphysis.

PubMed

Goodday, Reginald H B

2013-11-01

Mandibular fracture, specifically in the symphysis and body regions combined, is the most common facial fracture requiring hospitalization in North America. The primary treatment objective is to restore form and function by achieving anatomic reduction and placing fixation that eliminates mobility of the bone fragments. Several treatment options and surgical techniques are available for performing closed or open reduction. Special considerations are necessary when treating pediatric patients and fractures of the edentulous mandible. Complications relating to the tooth and denture-bearing regions of the mandible include infection, nonunion, and neurosensory changes. Copyright © 2013 Elsevier Inc. All rights reserved.

A Bony Landmark 'RAI Triangle' to Prevent 'Misplaced and Misdirected' Medial Cut in SSRO.

PubMed

Rai, Kirthi Kumar; Arakeri, Gururaj; Khaji, Shahanavaj I

2011-03-01

'Rai triangle', a new anatomic landmark on the medial surface of the ramus of the mandible which when identified and taken into consideration, may have a definite advantage. This is especially in terms of performing the medial horizontal cut which is an important and integral part of the sagittal split ramus osteotomy so as to avoid a bad split. The objective of this article is to propose an easily identifiable bony land mark, which is closely related to lingula of mandible that may ease the procedure of osteotomy and avoid bad splits.

Solitary plasmacytoma of the mandible: A rare case report

PubMed Central

Sharma, Naresh Kumar; Singh, Akhilesh Kumar; Pandey, Arun; Verma, Vishal

2015-01-01

Plasmacytoma is a monoclonal, neoplastic proliferation of plasma cells that usually arises within bone marrow or soft tissue sites. It can involve either a single bone (solitary) or multiple bones. Solitary plasmacytoma has a predisposition for the red marrow-containing axial skeleton and is most frequently seen in the thoracic vertebrae, followed by the ribs, sternum, clavicle, or scapula. Its presence in the jaws is extremely rare. We present a case of a 54-year-old female with a well-defined radiolucency of the body region of the mandible later diagnosed as solitary plasmacytoma. PMID:26668458

Teratogenic Potential of Ethylene Thiourea (ETU), A Positive Control in Sprague-Dawley Rats.

DTIC Science & Technology

1987-10-01

fetuses examined 308 215 Anomalies Exencephaly 219 71 Hydrocephaly 123 40 Domed cranium 98 32 1 0 Flat cranium 62 20 Pointed cranium 2 1 N. Cleft palate ...Brachygnathia 27 18 Prognathism 1 1 Agnathia I l Lobed tongue I 1 Protruding tongue 1O 7 Cleft palate 14 9 Cleft nose and palate 1 1 Abnormal turblnates 1 I...mandible 6 4 1 1 Short mandible 13 8 Cleft palate 26 16 Kyphosis 70 44 Scoliosis 5 3 Missing lumbar vertebrae 3 2 Missing ribs 4 2 Branched or fused ribs 42

Giant cemento-ossifying fibroma of the mandible

PubMed Central

Naik, Raghavendra Mahadev; Guruprasad, Yadavalli; Sujatha, D; Gurudath, Shubha; Pai, Anuradha; Suresh, KV

2014-01-01

Cemento-ossifying fibroma (COF) is classified as a fibro-osseous neoplasm and included among the non-odontogenic tumors derived from the mesenchymal blast cells of the periodontal ligament, with a potential for forming fibrous tissue, cementum and bone, or a combination of such elements. These are slow-growing lesions, and are more frequent in women between the third and fourth decades of life. Case reports of massive expansile COF, measuring more than 10 cm are rarely reported in the literature. We report a case of giant cemento-ossifying fibroma of the mandible in a 34 year old female patient. PMID:24678226

Giant cemento-ossifying fibroma of the mandible.

PubMed

Naik, Raghavendra Mahadev; Guruprasad, Yadavalli; Sujatha, D; Gurudath, Shubha; Pai, Anuradha; Suresh, Kv

2014-01-01

Cemento-ossifying fibroma (COF) is classified as a fibro-osseous neoplasm and included among the non-odontogenic tumors derived from the mesenchymal blast cells of the periodontal ligament, with a potential for forming fibrous tissue, cementum and bone, or a combination of such elements. These are slow-growing lesions, and are more frequent in women between the third and fourth decades of life. Case reports of massive expansile COF, measuring more than 10 cm are rarely reported in the literature. We report a case of giant cemento-ossifying fibroma of the mandible in a 34 year old female patient.

Disto-angular transmigrated impacted mandibular molar with enostosis: A rare intraoral lesion

PubMed Central

Natarajan, Shanmuganathan; Madhankumar, Seenivasan; Jeyapalan, Karthigeyan; Athiban, I.; Elengkumaran, S.; Periyakaruppiah, K. P. S.

2015-01-01

A 29-year-old male patient reported for replacement of missing teeth. The patient gave history of unerupted right lower posterior teeth and the orthopantomogram revealed transmigrated mandibular second molar to the inferior border of mandible just below the root apices of second premolar associated with enostosis distally toward the ramus of mandible with size of about 21 mm Χ 20 mm. This rare interosseous defect plays a vital role in deciding prosthetic treatment options for missing teeth and utmost care should be taken to preserve the health of the patient during such procedures. PMID:26538971

Disto-angular transmigrated impacted mandibular molar with enostosis: A rare intraoral lesion.

PubMed

Natarajan, Shanmuganathan; Madhankumar, Seenivasan; Jeyapalan, Karthigeyan; Athiban, I; Elengkumaran, S; Periyakaruppiah, K P S

2015-08-01

A 29-year-old male patient reported for replacement of missing teeth. The patient gave history of unerupted right lower posterior teeth and the orthopantomogram revealed transmigrated mandibular second molar to the inferior border of mandible just below the root apices of second premolar associated with enostosis distally toward the ramus of mandible with size of about 21 mm Χ 20 mm. This rare interosseous defect plays a vital role in deciding prosthetic treatment options for missing teeth and utmost care should be taken to preserve the health of the patient during such procedures.

Patterns of Pediatric Mandible Fractures in the United States.

PubMed

Owusu, James A; Bellile, Emily; Moyer, Jeffrey S; Sidman, James D

2016-01-01

The mandible is arguably the most frequently fractured facial bone in children. However, facial fractures are rare in children compared with adults, resulting in few large studies on patterns of pediatric facial fractures. To report the patterns, demographics, and cause of pediatric mandible fractures across the United States. A retrospective analysis was conducted of the Healthcare Cost and Utilization Project's National Emergency Department Sample from January 1 to December 31, 2012, using the International Classification of Disease, Ninth Revision, codes for mandible fractures (802.20-802.39) among patients 18 years and younger who presented to emergency departments. Demographics, fracture site, and fracture mechanism were analyzed to identify factors associated with fractures. Analysis was conducted from July 9 to July 28, 2015. There were 1984 records, representing a weighted estimate of 8848 cases of pediatric mandible fracture. The mean patient age was 14.0 years (95% CI, 13.6-14.3). The male to female ratio was 4:1 and females were comparatively younger, with a mean age of 12.5 years (95% CI, 11.8-13.1; P < .001). The most frequently fractured sites were the condyle, in 1288 patients (14.6% [95% CI, 12.6%-16.5%]), and the angle, in 1252 patients (14.1% [12.4%-15.9%]). Associated intracranial injuries occurred in 756 patients (8.5% [7.1%-10.0%]), and cervical spine fractures occurred in 393 (4.4% [3.5%-5.4%]). The fracture site and mechanism of injury varied with age and sex. For patients 12 years and younger, the most frequent fracture site was the condyle, accounting for 636 fractures (27.9% [24.2%-31.6%]), and the most frequent cause was falls, accounting for 692 fractures (30.3% [25.9%-34.8%]). In teenaged patients (13-18 years), the angle was the most frequent fracture site, accounting for 1157 fractures (17.6% [15.6%-19.6%]), and the most frequent cause was assault, accounting for 2619 fractures (39.9% [36.4%-43.3%]). For male patients, the angle was the predominant site, accounting for 1053 fractures (15.0% [13.1%-16.8%]), and the leading cause was assault, accounting for 2360 fractures (33.5% [30.2%-36.9%]). For female patients, the condyle was the most frequent site, accounting for 369 fractures (20.3% [16.0%-24.6%]), and the leading cause was falls, accounting for 422 fractures (23.2% [18.6%-28.0%]). In this study, age and sex disparities among pediatric mandible fractures were identified. Younger patients and female patients tend to have condyle fractures caused more commonly by falls while older patients and male patients tend to have angle fractures caused by assault. NA.

Distraction osteogenesis of costochondral bone grafts in the mandible.

PubMed

Stelnicki, Eric J; Hollier, Larry; Lee, Catherine; Lin, Wen-Yuan; Grayson, Barry; McCarthy, Joseph G

2002-03-01

Costochondral grafting for reconstruction of the Pruzansky type III mandible has given variable results. Lengthening of the rib graft by means of distraction had been advocated when subsequent growth of the grafted mandible is inadequate. This retrospective study reviews a series of patients with mandibular costochondral grafts who underwent subsequent distraction osteogenesis of the graft. A retrospective review identified two patient groups: group 1 consisted of individuals (n = 9) who underwent costochondral rib grafting of the mandible followed by distraction osteogenesis several months later at a rate of 1 mm/day. Group 2 consisted of patients with Pruzansky type II mandibles who had distraction osteogenesis without prior rib grafting (n = 9). The biomechanical parameters, orthodontic treatment regimens, and complications were examined versus patient age and quality of the rib graft. Distraction osteogenesis was successfully performed in six of the rib graft patients (group 1) and in all of the group 2 individuals. On the basis of the Haminishi scale, the computed tomographic scan appearance of the regenerate was classified as "standard or external" in six of the group 1 patients and as either "agenetic" or "pillar" (fibrous union) in the remaining three patients. In group 1, the average device was expanded 23 mm (range, 20 to 30 mm). Group 2 mandibular distraction results were all classified as either standard or external, and there was an average device expansion of 22.4 mm (range, 16 to 30 mm). The length of consolidation averaged 12.6 weeks in group 1, compared with 8.5 weeks in the traditional mandibular distraction patients (group 2). The mean shift of the dental midline to the contralateral side was 2.5 mm in group 1 versus 4.0 mm in group 2. Complex multiplanar and transport distractions were successfully performed on grafts of adequate bony volume. All four patients in group 1 with tracheostomies were successfully decannulated after consolidation. Rib graft distraction complications included pin tract infections in two patients, hardware failure with premature pin pullout in one patient, and evidence of fibrous nonunions in three young patients with single, diminutive rib grafts. In group 2, there were no distraction failures. Distraction osteogenesis can be successfully performed on costochondral rib grafts of the mandible; however, the complication rate is higher than in non-rib-graft patients. Performing the technique on older, more cooperative individuals seems to reduce this risk. In addition, placement of a double rib graft or an iliac bone graft of sufficient volume to create a neomandible with greater bone stock is an absolute requirement to decrease the risk of fibrous nonunion and provide a bone base of sufficient size for retention of the distraction device and manipulation of the regenerate.

Tendon entheses of the human masticatory muscles.

PubMed

Hems, T; Tillmann, B

2000-09-01

Tendons attach to the limb skeleton via chondral-apophysary or periosteal-diaphysary entheses. It was the aim of the present study to investigate the tendon entheses of the temporal, the masseter, as well as the medial and lateral pterygoid muscles, considering the biomechanics and the mode of osteogenesis at the attachment sites. The origin and insertion zones of the four masticatory muscles were studied histologically and by polarization light microscopy in six halves of human heads. Contrary to the limb skeleton no causal relationship between the histological structure of the tendon entheses and the osteogenic mode of the bone areas involved was observed in the masticatory muscles that were studied. Based on the histological findings, a purely structural classification of the tendon attachments irrespective of the osteogenesis is therefore proposed that is applicable to the entire skeleton. It is possible to distinguish between tendon entheses inserting into periosteum, into bone or into fibrocartilage. Tendon attachments with periosteal insertion are found at the temporal plane, the retromolar triangle, zygomatic arch, lateral pterygoid plate, in the caudal zone of the pterygoid fovea of the neck of mandible as well as major portions of the ramus and angle of the mandible. The attachment zones in which collagen fibrils of tendons insert into the bone via the periosteum correspond in their structure to plane periosteal-diaphysary insertions into the diaphyses of long bones. Attachment zones to the bone are present at the inferior temporal line, the base of the coronoid process, the caudal surface of the zygomatic arch, the cranial zones of the pterygoid fovea of the neck of the mandible as well as at circumscribed areas of the ramus and angle of the mandible. In these zones the collagen fibers of the tendon insert immediately into the bone without any mediation of other tissues. The entheses resemble those of circumscribed periosteal-diaphysary attachments to long bones. Fibrocartilaginous entheses occur at the coronoid process, the cranialmost portions of the pterygoid fovea of the neck of the mandible as well as in circumscribed areas of the medial and lateral facets of the angle of the mandible. The structures of these attachment sites are comparable to chondral-apophysary tendon attachments. As for masticatory muscles, the described forms of tendon entheses occur at the same time in the majority of the attachment sites. From the structure of the three types of tendon entheses it is possible to conclude that they fulfill a biomechanical function similar to that of the limb skeleton, namely adapting the different elasticity moduli of bone and tendon tissues. From a technical perspective they can be considered to act as an "angle and stretching brake".

A finite element analysis of the stress distribution to the mandible from impact forces with various orientations of third molars*

PubMed Central

Liu, Yun-feng; Wang, Russell; Baur, Dale A.; Jiang, Xian-feng

2018-01-01

Objective: To investigate the stress distribution to the mandible, with and without impacted third molars (IM3s) at various orientations, resulting from a 2000-Newton impact force either from the anterior midline or from the body of the mandible. Materials and methods: A 3D mandibular virtual model from a healthy dentate patient was created and the mechanical properties of the mandible were categorized to 9 levels based on the Hounsfield unit measured from computed tomography (CT) images. Von Mises stress distributions to the mandibular angle and condylar areas from static impact forces (Load I-front blow and Load II left blow) were evaluated using finite element analysis (FEA). Six groups with IM3 were included: full horizontal bony, full vertical bony, full 450 mesioangular bony, partial horizontal bony, partial vertical, and partial 450 mesioangular bony impaction, and a baseline group with no third molars. Results: Von Mises stresses in the condyle and angle areas were higher for partially than for fully impacted third molars under both loading conditions, with partial horizontal IM3 showing the highest fracture risk. Stresses were higher on the contralateral than on the ipsilateral side. Under Load II, the angle area had the highest stress for various orientations of IM3s. The condylar region had the highest stress when IM3s were absent. Conclusions: High-impact forces are more likely to cause condylar rather than angular fracture when IM3s are missing. The risk of mandibular fracture is higher for partially than fully impacted third molars, with the angulation of impaction having little effect on facture risk. PMID:29308606

Virtual reconstruction of the Early Pleistocene mandible ATD6-96 from Gran Dolina-TD6-2 (Sierra De Atapuerca, Spain).

PubMed

Bermúdez de Castro, José María; Martín-Francés, Laura; Modesto-Mata, Mario; Martínez de Pinillos, Marina; Martinón-Torres, María; García-Campos, Cecilia; Carretero, José Miguel

2016-04-01

In this report, we present a further study of the late Early Pleistocene ATD6-96 human mandible, recovered from the TD6-2 level of the Gran Dolina cave site (Sierra de Atapuerca, northern Spain) and attributed to Homo antecessor. ATD6-96 consists of a left half of a gracile mandible of an adult individual with the premolars and molars in place that is broken at the level of the lateral incisor-canine septum. The present analysis is based on a virtual reconstruction of the whole mandible by means of computed tomography (CT). We have reconstructed the symphysis using information from a modern human sample, as well as from a wide sample composed of several Homo specimens. This research has allowed us to record new variables with taxonomic and phylogenetic interest. We have estimated the length/width index of the alveolar arcade, as well as the percentage of the arcade length with regard to the total length. The latter confirms that ATD6-96 shares with all African and Asian Homo species a primitive structural pattern, as it was established in previous studies. In constrast, the length/width index of the alveolar arcade in the H. antecessor specimen is close to the mean values of Neandertals and the Atapuerca-Sima de los Huesos hominins. H. antecessor is derived regarding the shape of the mandibular alveolar arcade within the genus Homo and points to an early divergence from contemporaneous African populations. Our results also ratify the affinities of H. antecessor with Neanderthals, although the precise relationship with this lineage needs further research. © 2015 Wiley Periodicals, Inc.

Survival of dental implants in native and grafted bone in irradiated head and neck cancer patients: a retrospective analysis.

PubMed

Buddula, Aravind; Assad, Daniel A; Salinas, Thomas J; Garces, Yolanda I

2011-01-01

To study the long-term survival of dental implants placed in native or grafted bone in irradiated bone in subjects who had received radiation for head and neck cancer. A retrospective chart review was conducted for all patients who received dental implants following radiation treatment for head and neck cancer between May 1, 1987 and July 1, 2008. Only patients irradiated with a radiation dose of 50 Gy or greater and those who received dental implants in the irradiated field after head and neck radiation were included in the study. The associations between implant survival and patient/implant characteristics were estimated by fitting univariate marginal Cox proportional hazards models. A total of 48 patients who had prior head and neck radiation had 271 dental implants placed during May 1987-July 2008. There was no statistically significant difference between implant failure in native and grafted bone (P=0.76). Survival of implants in grafted bone was 82.3% and 98.1% in maxilla and mandible, respectively, after 3 years. Survival of implants in native bone in maxilla and mandible was 79.8% and 100%, respectively, after 3 years. For implants placed in the native bone, there was a higher likelihood of failure in the maxilla compared to the mandible and there was also a tendency for implants placed in the posterior region to fail compared to those placed in the anterior region. There was no significant difference in survival when implants were placed in native or grafted bone in irradiated head and neck cancer patients. For implants placed in native bone, survival was significantly influenced by the location of the implant (maxilla or mandible, anterior or posterior).

Establishment of sequential software processing for a biomechanical model of mandibular reconstruction with custom-made plate.

PubMed

Li, Peng; Tang, Youchao; Li, Jia; Shen, Longduo; Tian, Weidong; Tang, Wei

2013-09-01

The aim of this study is to describe the sequential software processing of computed tomography (CT) dataset for reconstructing the finite element analysis (FEA) mandibular model with custom-made plate, and to provide a theoretical basis for clinical usage of this reconstruction method. A CT scan was done on one patient who had mandibular continuity defects. This CT dataset in DICOM format was imported into Mimics 10.0 software in which a three-dimensional (3-D) model of the facial skeleton was reconstructed and the mandible was segmented out. With Geomagic Studio 11.0, one custom-made plate and nine virtual screws were designed. All parts of the reconstructed mandible were converted into NURBS and saved as IGES format for importing into pro/E 4.0. After Boolean operation and assembly, the model was switched to ANSYS Workbench 12.0. Finally, after applying the boundary conditions and material properties, an analysis was performed. As results, a 3-D FEA model was successfully developed using the softwares above. The stress-strain distribution precisely indicated biomechanical performance of the reconstructed mandible on the normal occlusion load, without stress concentrated areas. The Von-Mises stress in all parts of the model, from the maximum value of 50.9MPa to the minimum value of 0.1MPa, was lower than the ultimate tensile strength. In conclusion, the described strategy could speedily and successfully produce a biomechanical model of a reconstructed mandible with custom-made plate. Using this FEA foundation, the custom-made plate may be improved for an optimal clinical outcome. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Automated detection of abnormalities in paranasal sinus on dental panoramic radiographs by using contralateral subtraction technique based on mandible contour

NASA Astrophysics Data System (ADS)

Mori, Shintaro; Hara, Takeshi; Tagami, Motoki; Muramatsu, Chicako; Kaneda, Takashi; Katsumata, Akitoshi; Fujita, Hiroshi

2013-02-01

Inflammation in paranasal sinus sometimes becomes chronic to take long terms for the treatment. The finding is important for the early treatment, but general dentists may not recognize the findings because they focus on teeth treatments. The purpose of this study was to develop a computer-aided detection (CAD) system for the inflammation in paranasal sinus on dental panoramic radiographs (DPRs) by using the mandible contour and to demonstrate the potential usefulness of the CAD system by means of receiver operating characteristic analysis. The detection scheme consists of 3 steps: 1) Contour extraction of mandible, 2) Contralateral subtraction, and 3) Automated detection. The Canny operator and active contour model were applied to extract the edge at the first step. At the subtraction step, the right region of the extracted contour image was flipped to compare with the left region. Mutual information between two selected regions was obtained to estimate the shift parameters of image registration. The subtraction images were generated based on the shift parameter. Rectangle regions of left and right paranasal sinus on the subtraction image were determined based on the size of mandible. The abnormal side of the regions was determined by taking the difference between the averages of each region. Thirteen readers were responded to all cases without and with the automated results. The averaged AUC of all readers was increased from 0.69 to 0.73 with statistical significance (p=0.032) when the automated detection results were provided. In conclusion, the automated detection method based on contralateral subtraction technique improves readers' interpretation performance of inflammation in paranasal sinus on DPRs.

Biomechanical loading test on reconstructed mandibles with fibular, iliac crest or scapula graft: a comparative study.

PubMed

Grohmann, Isabella; Raith, Stefan; Mücke, Thomas; Stimmer, Herbert; Rohleder, Nils; Kesting, Marco R; Hölzle, Frank; Steiner, Timm

2015-10-01

Advantages and disadavantages of the three most commonly-used bone grafts for mandibular reconstruction are widely known, but biomechanical experimental studies are rare. We have done loading tests on cadaveric mandibles reconstructed with fibular, iliac crest, and scapular grafts using 3 different osteosynthesis systems to detect and compare their primary stability. Loading tests were done on mandibles with grafts from the fibula and iliac crest and published previously. A 4.5cm paramedian L-type defect was reconstructed with scapula using 2 monocortical non-locking plates, 2 monocortical locking plates, or a single bicortical locking plate/fracture gap in 18 human cadaveric mandibles. These were loaded on to the "Mandibulator" test bench and the movement of fragments in 3 dimensions was assessed and quantified by a PONTOS® optical measurement system. Comparison of the osteosynthesis groups showed that the miniplate was significantly superior to the 6-hole TriLock® plate for both fibular and iliac crest grafts. The fibular graft gave greater stability than the iliac crest and scapular grafts for all 3 osteosynthesis systems. All bony specimens offered sufficient resistance to mechanical stress within the recognised range of biting forces after mandibular reconstruction, independently of the choice of bone graft and osteosynthesis system used. Anatomical and surgical advantages need to be taken into account when choosing a graft. Stability can be maximised with a fibular graft, and further optimised by enlarging the binding area by using the "double barrel" method. Computer simulated experiments could segregate factors that biased results, such as morphological differences among cadavers. Copyright © 2015 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Mandible Fracture Complications and Infection: The Influence of Demographics and Modifiable Factors.

PubMed

Odom, Elizabeth B; Snyder-Warwick, Alison K

2016-08-01

Mandible fractures account for 36 to 70 percent of all facial fractures. Despite their high prevalence, the literature lacks a comprehensive review of demographics, fracture patterns, timing of management, antibiotic selection, and outcomes, particularly when evaluating pediatric versus adult patients. The authors aim to determine the complication and infection rates after surgical treatment of mandibular fractures and the bacterial isolates and antibiotic sensitivities from mandible infections after open reduction and internal fixation at their institution. Data were collected retrospectively for all mandible fractures treated at the authors' institution between 2003 and 2013. Patients were divided into pediatric (younger than 16 years) and adult (16 years or older) subgroups. Demographics, fracture location, fracture cause, comorbidities, antibiotic choice, and subsequent complications and infections were analyzed. Data were evaluated using appropriate statistical tests for each variable. Three hundred ninety-five patients were evaluated. Demographics and fracture cause were similar to those reported in current literature. Of the 56 pediatric patients, complications occurred in 5.6 percent. Time from injury to operative intervention did not affect outcome. The complication rate was 17.5 percent and the infection rate was 9.4 percent in the adult subgroup. Time from injury to operative intervention, sex, and edentulism were not significant predictors of complication or infection. Tobacco use, number of fractures, number of fractures fixated, and surgical approach were predictors of complication and infection. Perioperative ampicillin-sulbactam had a significantly lower risk of infection. Certain demographic and operative factors lead to significantly higher risks of complications after surgical management of mandibular fractures. Ampicillin-sulbactam provides effective antibiotic prophylaxis. Risk factor modification may improve outcomes. Risk, IV.

Ethnicity and skeletal Class III morphology: a pubertal growth analysis using thin-plate spline analysis.

PubMed

Alkhamrah, B; Terada, K; Yamaki, M; Ali, I M; Hanada, K

2001-01-01

A longitudinal retrospective study using thin-plate spline analysis was used to investigate skeletal Class III etiology in Japanese female adolescents. Headfilms of 40 subjects were chosen from the archives of the Orthodontic department at Niigata University Dental Hospital, and were traced at IIIB and IVA Hellman dental ages. Twenty-eight homologous landmarks, representing hard and soft tissue, were digitized. These were used to reproduce a consensus for the profilogram, craniomaxillary complex, mandible, and soft tissue for each age and skeletal group. Generalized least-square analysis revealed a significant shape difference between age-matched groups (P < .001), except for the craniomaxillary complex at stage IVA. T test for size analysis showed unequivocally increased mandibular size in skeletal Class III, which directly increased the craniofacial size collectively (P < .05). A deviant profilogram showed anisotropy displaying as maxillary deficiency, acute cranial base, and obtuse gonial angle in addition to increased facial height at stage IIIB. Maxillary retrusion decreased while the mandible showed excessive incremental growth and a forward position caused by deficient orthocephalization at stage IVA. Craniomaxillary complex total spline and partial warps (PW)3 and 2 showed a maxillary retrusion at stage IIIB opposite an acute cranial base at stage IVA. Mandibular total spline and PW4, 5 showed changes affecting most landmarks and their spatial interrelationship, especially a stretch along the articulare-pogonion axis. In soft tissue analysis, PW8 showed large and local changes which paralleled the underlying hard tissue components. Allometry of the mandible and anisotropy of the cranial base, the maxilla, and the mandible asserted the complexity of craniofacial growth and the difficulty of predicting its outcome.

Serum Concentration of Macro-, Micro-, and Trace Elements in Silver Fox (Vulpes vulpes) and Their Interrelationships with Morphometric, Densitometric, and Mechanical Properties of the Mandible.

PubMed

Tatara, Marcin R; Łuszczewska-Sierakowska, Iwona; Krupski, Witold

2017-12-20

The optimal content of macro-, micro-, and trace elements in tissues ensures proper systemic growth and development and optimal health status in animals and humans. However, very little is known on the elemental content in the plasma compartment in Silver fox. The aim of this study was to determine the content of selected elements in serum obtained from 8-month-old female (N = 8) and male (N = 7) silver foxes. Moreover, relationships of the evaluated elements with the morphological, densitometric, and mechanical parameters of the mandible were determined. Serum content of 12 different elements was measured using inductively coupled plasma-atomic emission spectrometry. The morphometric and densitometric properties of the mandible were determined using quantitative computed tomography method, while mechanical endurance was tested using a three-point bending test. Serum concentration of calcium was significantly higher by 20% in male foxes (P = 0.01), while manganese concentration was significantly lower in males by over 17% (P = 0.03). Positive correlations of serum concentration of calcium, phosphorus, and magnesium with the morphological traits of the mandible such as weight, length, and bone volume were stated (P < 0.05). In the group of elements playing regulatory functions, the positive relationships between serum concentrations of selenium, chromium, manganese, copper, and cobalt were found (P < 0.05). The elaborated experimental model may serve for further studies on foxes, especially focused on nutritional factors affecting elemental homeostasis, whole-body metabolism, and systemic growth and development. Daily diet formulation and precise delivery for farm foxes, together with relatively large animal population maintained at the same environmental conditions, regularly subjected to slaughter procedure, enable economical experimentation with various dietary and pharmacological manipulations.

Clinical experiences with laser-welded titanium frameworks supported by implants in the edentulous mandible: a 5-year follow-up study.

PubMed

Ortorp, A; Linden, B; Jemt, T

1999-01-01

The purpose of this study was to report the 5-year clinical performance of implant-supported prostheses with laser-welded titanium frameworks and to compare their performance with that of prostheses provided with conventional cast frameworks. On a routine basis, a consecutive group of 824 edentulous patients were provided with fixed prostheses supported by implants in the edentulous mandible. In addition to conventional gold-alloy castings, patients were at random provided with 2 kinds of laser-welded titanium frameworks. In all, 155 patients were included in the 2 titanium framework groups. A control group of 53 randomly selected patients with conventional gold-alloy castings was used for comparison. Clinical and radiographic 5-year data was collected for the 3 groups. All followed patients still had fixed prostheses in the mandible after 5 years. The overall cumulative success rates were 95.9% and 99.7% for titanium-framework prostheses and implants, respectively. The corresponding success rates for the control group were 100% and 99.6%, respectively. Bone loss was 0.5 mm on average during the 5-year follow-up period. The most common complications for titanium frameworks were resin or tooth fractures, gingival inflammation, and fractures of the metal frames (10%). One of the cast frameworks fractured and was resoldered. Loose and fractured implant screw components were few (< 1%). Even though the cast frameworks had a higher success rate, the overall titanium framework treatment result was well in accordance with the result of the control group. The test groups performed better after clinicians had gained some experience with the technique, and laser-welded titanium frameworks seem to be a viable alternative to conventional castings in the edentulous mandible.

Influence of different abutment diameter of implants on the peri-implant stress in the crestal bone: A three-dimensional finite element analysis--In vitro study.

PubMed

Aradya, Anupama; Kumar, U Krishna; Chowdhary, Ramesh

2016-01-01

The study was designed to evaluate and compare stress distribution in transcortical section of bone with normal abutment and platform switched abutment under vertical and oblique forces in posterior mandible region. A three-dimensional finite element model was designed using ANSYS 13.0 software. The type of bone selection for the model was made of type II mandibular bone, having cortical bone thickness ranging from 0.595 mm to 1.515 mm with the crestal region measuring 1.5 mm surrounding dense trabecular bone. The implant will be modulated at 5 mm restorative platform and tapering down to 4.5 mm wide at the threads, 13 mm long with an abutment 3 mm in height. The models will be designed for two situations: (1) An implant with a 5 mm diameter abutment representing a standard platform in the posterior mandible region. (2) An implant with a 4.5 mm diameter abutment representing platform switching in the posterior mandible region. Force application was performed in both oblique and vertical conditions using 100 N as a representative masticatory force. For oblique loading, a force of 100 N was applied at 15° from the vertical axis. von Mises stress analysis was evaluated. The results of the study showed cortical stress in the conventional and platform switching model under oblique forces were 59.329 MPa and 39.952 MPa, respectively. Cortical stress in the conventional and platform switching model under vertical forces was 13.914 MPa and 12.793 MPa, respectively. Results from this study showed the platform switched abutment led to relative decrease in von Mises stress in transcortical section of bone compared to normal abutment under vertical and oblique forces in posterior mandible region.

Immediate occlusal loading of double acid-etched surface titanium implants in 41 consecutive full-arch cases in the mandible and maxilla: 6- to 74-month results.

PubMed

Ibañez, Juan C; Tahhan, Marcelo J; Zamar, Juan A; Menendez, Alicia B; Juaneda, Agustina M; Zamar, Nicolas J; Monqaut, Jose L

2005-11-01

The high success rate of dental implants has changed the quality of life for many patients. Immediate loading finds its application in some clinical cases and certainly adds another modality of treatment for the implant patient. Starting with a few implants immediately loaded with a bar overdenture in the mandible, the concept of immediate loading evolved to loading multiple implants in both the maxilla and mandible. In this investigation, 41 consecutive patients who needed full-arch restorations were treated with 343 double acid-etched surface implants between May 1998 and March 2004. The sample included smokers and bruxers. Twenty-three mandibular and 26 maxillary cases were treated, loading the implants within 48 hours, by using resin provisional prostheses, metal-reinforced provisional prostheses, or definitive prostheses (metal-acrylic or metal-ceramic). All implants were followed for 12 to 74 months. Follow-up consisted of clinical as well as radiographic examination. Furthermore, resonance frequency analysis was done in most of the implants during the last 2 years. The success rate obtained was 99.42% (only two mandibular implants that are still surviving were considered failures). The bone level was measured every year. The average radiographic bone level change was 0.56 mm at 12, 0.76 mm at 24, 0.84 mm at 36, 0.82 mm at 48, 0.83 mm at 60, and 0.94 mm at 72 months. A high success rate can be achieved when double acid-etched surface implants are immediately loaded with fixed full-arch restorations in the maxilla and mandible.

Accuracy of three-dimensional, paper-based models generated using a low-cost, three-dimensional printer.

PubMed

Olszewski, Raphael; Szymor, Piotr; Kozakiewicz, Marcin

2014-12-01

Our study aimed to determine the accuracy of a low-cost, paper-based 3D printer by comparing a dry human mandible to its corresponding three-dimensional (3D) model using a 3D measuring arm. One dry human mandible and its corresponding printed model were evaluated. The model was produced using DICOM data from cone beam computed tomography. The data were imported into Maxilim software, wherein automatic segmentation was performed, and the STL file was saved. These data were subsequently analysed, repaired, cut and prepared for printing with netfabb software. These prepared data were used to create a paper-based model of a mandible with an MCor Matrix 300 printer. Seventy-six anatomical landmarks were chosen and measured 20 times on the mandible and the model using a MicroScribe G2X 3D measuring arm. The distances between all the selected landmarks were measured and compared. Only landmarks with a point inaccuracy less than 30% were used in further analyses. The mean absolute difference for the selected 2016 measurements was 0.36 ± 0.29 mm. The mean relative difference was 1.87 ± 3.14%; however, the measurement length significantly influenced the relative difference. The accuracy of the 3D model printed using the paper-based, low-cost 3D Matrix 300 printer was acceptable. The average error was no greater than that measured with other types of 3D printers. The mean relative difference should not be considered the best way to compare studies. The point inaccuracy methodology proposed in this study may be helpful in future studies concerned with evaluating the accuracy of 3D rapid prototyping models. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Surgical treatment of jaw osteonecrosis in "Krokodil" drug addicted patients.

PubMed

Poghosyan, Yuri M; Hakobyan, Koryun A; Poghosyan, Anna Yu; Avetisyan, Eduard K

2014-12-01

Retrospective study of jaw osteonecrosis treatment in patients using the "Krokodil" drug from 2009 to 2013. On the territory of the former USSR countries there is widespread use of a self-produced drug called "Krokodil". Codeine containing analgesics ("Sedalgin", "Pentalgin" etc), red phosphorus (from match boxes) and other easily acquired chemical components are used for synthesis of this drug, which used intravenously. Jaw osteonecrosis develops as a complication in patients who use "Krokodil". The main feature of this disease is jawbone exposure in the oral cavity. Surgery is the main method for the treatment of jaw osteonecrosis in patients using "Krokodil". 40 "Krokodil" drug addict patients with jaw osteonecrosis were treated. Involvement of maxilla was found in 11 patients (27.5%), mandible in 21 (52.5%), both jaws in 8 (20%) patients. 35 Lesions were found in 29 mandibles and 21 lesions in 19 maxillas. Main factors of treatment success are: cessation of "Krokodil" use in the pre- (minimum 1 month) and postoperative period and osteonecrosis area resection of a minimum of 0.5 cm beyond the visible borders of osteonecrosis towards the healthy tissues. Surgery was not delayed until sequestrum formation. In the mandible marginal or segmental resection (with or without TMJ exarticulation) was performed. After surgery recurrence of disease was seen in 8 (23%) cases in the mandible, with no cases of recurrence in the maxilla. According to our experience in this case series, surgery is the main method for the treatment of jaw osteonecrosis in patients using "Krokodil". Cessation of drug use and jaw resection minimize the rate of recurrences in such patients. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Age estimation in 25-45 yrs. old females by physical and radiological methods

PubMed Central

Kasat, Vikrant; Karjodkar, FR; Vaz, Walter

2010-01-01

Aim: The purpose of this study was to estimate the age in living females in the later years (25 to 45 years) from general physical features and radiographic changes in the sternum and the mandible. Materials and Methods: A cross-sectional study was conducted on 64 females (32 subjects in each study and control group). All the subjects were physically examined for graying of scalp, body, pubic hair, and for wrinkling of skin of the forehead, temporal region, and below the eyes. A right lateral view of the chest was taken to determine fusion of the components of the sternum. Combined Hair Score, Combined Skin Score, and Combined Bone Fusion Score were calculated. An orthopantomogram of each patient was traced for lower jaw, mandibular canal and teeth, and D1, D2, A values were calculated. SPSS Software Version 10.1 was used for the execution of the regression command on the 32 cases of the control group, whose ages were known. Results: Combined skin score, mandible right D2, mandible right angle, and mandible left angle turned out significant in the prediction of age. Using the regression equation obtained, the age of the 32 subjects in the study group was estimated. In 9.3% of cases, the predicted ages exactly matched the actual ages. A variation of 1–4 years was seen in 75% of the cases. A variation of 6–7 years was seen in 15.6% of the cases. Conclusion: This study succeeded in most instances in predicting the ages of the study group and in arriving at a formula for age estimation between the ages of 25 and 45 years without using any invasive, costly, time - consuming, or troublesome method. PMID:21731347

Coming of age in an ant colony: cephalic muscle maturation accompanies behavioral development in Pheidole dentata

NASA Astrophysics Data System (ADS)

Muscedere, Mario L.; Traniello, James F. A.; Gronenberg, Wulfila

2011-09-01

Although several neurobiological and genetic correlates of aging and behavioral development have been identified in social insect workers, little is known about how other age-related physiological processes, such as muscle maturation, contribute to task performance. We examined post-eclosion growth of three major muscles of the head capsule in major and minor workers of the ant Pheidole dentata using workers of different ages with distinct task repertoires. Mandible closer muscle fibers, which provide bite force and are thus critical for the use of the mandibles for biting and load carrying, fill the posterio-lateral portions of the head capsule in mature, older workers of both subcastes. Mandible closer fibers of newly eclosed workers, in contrast, are significantly thinner in both subcastes and grow during at least the next 6 days in minor workers, suggesting this muscle has reduced functionality for a substantial period of adult life and thus constrains task performance capability. Fibers of the antennal muscles and the pharynx dilator, which control antennal movements and food intake, respectively, also increase significantly in thickness with age. However, these fibers are only slightly thinner in newly eclosed workers and attain their maximum thickness over a shorter time span in minors. The different growth rates of these functionally distinct muscles likely have consequences for how adult P. dentata workers, particularly minors, develop their full and diverse task repertoire as they age. Workers may be capable of feeding and interacting socially soon after eclosion, but require a longer period of development to effectively use their mandibles, which enable the efficient performance of tasks ranging from nursing to foraging and defense.

Outcome and prognostic factors for osteosarcoma of the maxilla, mandible, or calvarium in dogs: 183 cases (1986-2012).

PubMed

Selmic, Laura E; Lafferty, Mary H; Kamstock, Debra A; Garner, Alana; Ehrhart, Nicole P; Worley, Deanna R; Withrow, Stephen J; Lana, Susan E

2014-10-15

To describe the biological behavior, clinical outcome, and prognostic factors of osteosarcoma of the maxilla, mandible, or calvarium in dogs. Retrospective case series. 183 client-owned dogs with osteosarcoma of the maxilla, mandible, or calvarium. Medical records for dogs treated for osteosarcoma of the maxilla, mandible, or calvarium from 1986 through 2012 were reviewed. Dogs with a histopathologic diagnosis of osteosarcoma and treated for a primary tumor arising from these bones of the head were included. Mean age was 9.3 years, and body weight was 31.8 kg (70.0 lb). Most dogs (124/183 [67.8%]) were purebred, and the most common primary tumor site was the maxilla (80 [43.7%]). Treatments included palliative medical treatment only (11/183 [6.0%]), coarsely fractionated radiation therapy (RT; 12 [6.6%]), fractionated or stereotactic RT (18 [9.8%]), surgery (135 [73.8%]), and both surgery and fractionated RT (7 [3.8%]). Eighty-three (45.4%) dogs received adjuvant chemotherapy. Local recurrence or progression occurred in 80 of 156 (51.3%) dogs, and 60 of 156 (38.5%) dogs developed distant metastases. Median survival time for all dogs was 239 days. Dogs that underwent surgery had a median survival time of 329 days. Histologically tumor-free surgical margins were associated with significantly decreased hazards of progression or recurrence (hazard ratio [HR], 0.4) and death (HR, 0.5). Dogs with osteosarcoma of the calvarium had a significantly greater hazard of local recurrence or progression (HR, 2.0). In this study, tumor excision in dogs with histologically tumor-free margins resulted in better local control and longer survival time than did other treatment types.

Risk Factors and Dose-Effect Relationship for Mandibular Osteoradionecrosis in Oral and Oropharyngeal Cancer Patients

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Ik Jae; Koom, Woong Sub; Lee, Chang Geol, E-mail: cglee1023@yuhs.a

2009-11-15

Purpose: To analyze risk factors and the dose-effect relationship for osteoradionecrosis (ORN) of the mandible after radiotherapy of oral and oropharyngeal cancers. Materials and Methods: One-hundred ninety-eight patients with oral (45%) and oropharyngeal cancer (55%) who had received external radiotherapy between 1990 and 2000 were retrospectively reviewed. All patients had a dental evaluation before radiotherapy. The median radiation dose was 60 Gy (range, 16-75 Gy), and the median biologically effective dose for late effects (BED{sub late}) in bone was 114 Gy{sub 2} (range, 30-167 Gy{sub 2}). Results: The frequency of ORN was 13 patients (6.6%). Among patients with mandibular surgery,more » eight had ORN at the surgical site. Among patients without mandibular surgery, five patients had ORN on the molar area of the mandible. The median time to ORN was 22 months (range, 1-69 months). Univariate analysis revealed that mandibular surgery and Co-60 were significant risk factors for ORN (p = 0.01 and 0.04, respectively). In multivariate analysis, mandibular surgery was the most important factor (p = 0.001). High radiation doses over BED 102.6 Gy{sub 2} (conventional dose of 54 Gy at 1.8 Gy/fraction) were also a significant factor for ORN (p = 0.008) and showed a positive dose-effect relationship in logistic regression (p = 0.04) for patients who had undergone mandibular surgery. Conclusions: Mandibular surgery was the most significant risk factor for ORN of mandible in oral and oropharyngeal cancers patients. A BED of 102.6 Gy{sub 2} or higher to the mandible also significantly increases the risk of ORN.« less

Condyle and mandibular bone change after unilateral condylar neck fracture in growing rats.

PubMed

Hu, Y; Yang, H-f; Li, S; Chen, J-z; Luo, Y-w; Yang, C

2012-08-01

Unilateral fracture of the condylar neck in immature subjects might lead to mandible asymmetry and condyle remodelling. A rat model was used to investigate mandibular deviation and condylar remodelling associated with condyle fracture. 72 4-week-old male rats were randomly divided into three groups: an experimental group (unilateral transverse condylar fracture induced surgically), a sham operation group (surgical exposure but no fracture), and a non-operative control group (no operation). The rats were killed at intervals up to 9weeks after surgery, and outcomes were assessed using various measures of mandible deviation, histological and X-ray observation, and immunohistochemical measures of expression levels of connective tissue growth factor (CTGF) and type II collagen (Col II). The fracture led to the degeneration of mandibular size, associated with atrophy of fractured condylar process. Progressive remodelling of cartilage and increasing expression levels of CTGF and Col II were found. The authors conclude that condylar fracture can lead to asymmetries in mandible and condyle remodelling and expression of CTGF and Col II in condylar cartilage on both the ipsilateral and the contralateral sides. Copyright © 2012 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

The Comprehensive AOCMF Classification System: Mandible Fractures-Level 3 Tutorial

PubMed Central

Cornelius, Carl-Peter; Audigé, Laurent; Kunz, Christoph; Rudderman, Randal; Buitrago-Téllez, Carlos H.; Frodel, John; Prein, Joachim

2014-01-01

This tutorial outlines the details of the AOCMF image-based classification system for fractures of the mandibular arch (i.e. the non-condylar mandible) at the precision level 3. It is the logical expansion of the fracture allocation to topographic mandibular sites outlined in level 2, and is based on three-dimensional (3D) imaging techniques/computed tomography (CT)/cone beam CT). Level 3 allows an anatomical description of the individual conditions of the mandibular arch such as the preinjury dental state and the degree of alveolar atrophy. Trauma sequelae are then addressed: (1) tooth injuries and periodontal trauma, (2) fracture involvement of the alveolar process, (3) the degree of fracture fragmentation in three categories (none, minor, and major), and (4) the presence of bone loss. The grading of fragmentation needs a 3D evaluation of the fracture area, allowing visualization of the outer and inner mandibular cortices. To document these fracture features beyond topography the alphanumeric codes are supplied with distinctive appendices. This level 3 tutorial is accompanied by a brief survey of the peculiarities of the edentulous atrophic mandible. Illustrations and a few case examples serve as instruction and reference to improve the understanding and application of the presented features. PMID:25489389

The influence of mandibular skeletal characteristics on inferior alveolar nerve block anesthesia.

PubMed

You, Tae Min; Kim, Kee-Deog; Huh, Jisun; Woo, Eun-Jung; Park, Wonse

2015-09-01

The inferior alveolar nerve block (IANB) is the most common anesthetic techniques in dentistry; however, its success rate is low. The purpose of this study was to determine the correlation between IANB failure and mandibular skeletal characteristics. In total, 693 cases of lower third molar extraction (n = 575 patients) were examined in this study. The ratio of the condylar and coronoid distances from the mandibular foramen (condyle-coronoid ratio [CC ratio]) was calculated, and the mandibular skeleton was then classified as normal, retrognathic, or prognathic. The correlation between IANB failure and sex, treatment side, and the CC ratio was assessed. The IANB failure rates for normal, retrognathic, and prognathic mandibles were 7.3%, 14.5%, and 9.5%, respectively, and the failure rate was highest among those with a CC ratio < 0.8 (severe retrognathic mandible). The failure rate was significantly higher in the retrognathic group than in normal group (P = 0.019), and there was no statistically significant difference between the other two groups. IANB failure could be attributable, in part, to the skeletal characteristics of the mandible. In addition, the failure rate was found to be significantly higher in the retrognathic group.

The influence of mandibular skeletal characteristics on inferior alveolar nerve block anesthesia

PubMed Central

You, Tae Min; Kim, Kee-Deog; Huh, Jisun; Woo, Eun-Jung

2015-01-01

Background The inferior alveolar nerve block (IANB) is the most common anesthetic techniques in dentistry; however, its success rate is low. The purpose of this study was to determine the correlation between IANB failure and mandibular skeletal characteristics Methods In total, 693 cases of lower third molar extraction (n = 575 patients) were examined in this study. The ratio of the condylar and coronoid distances from the mandibular foramen (condyle-coronoid ratio [CC ratio]) was calculated, and the mandibular skeleton was then classified as normal, retrognathic, or prognathic. The correlation between IANB failure and sex, treatment side, and the CC ratio was assessed. Results The IANB failure rates for normal, retrognathic, and prognathic mandibles were 7.3%, 14.5%, and 9.5%, respectively, and the failure rate was highest among those with a CC ratio < 0.8 (severe retrognathic mandible). The failure rate was significantly higher in the retrognathic group than in normal group (P = 0.019), and there was no statistically significant difference between the other two groups. Conclusions IANB failure could be attributable, in part, to the skeletal characteristics of the mandible. In addition, the failure rate was found to be significantly higher in the retrognathic group. PMID:28879267

Meckel’s and condylar cartilages anomalies in achondroplasia result in defective development and growth of the mandible

PubMed Central

Biosse Duplan, Martin; Komla-Ebri, Davide; Heuzé, Yann; Estibals, Valentin; Gaudas, Emilie; Kaci, Nabil; Benoist-Lasselin, Catherine; Zerah, Michel; Kramer, Ina; Kneissel, Michaela; Porta, Diana Grauss; Di Rocco, Federico; Legeai-Mallet, Laurence

2016-01-01

Activating FGFR3 mutations in human result in achondroplasia (ACH), the most frequent form of dwarfism, where cartilages are severely disturbed causing long bones, cranial base and vertebrae defects. Because mandibular development and growth rely on cartilages that guide or directly participate to the ossification process, we investigated the impact of FGFR3 mutations on mandibular shape, size and position. By using CT scan imaging of ACH children and by analyzing Fgfr3Y367C/+ mice, a model of ACH, we show that FGFR3 gain-of-function mutations lead to structural anomalies of primary (Meckel’s) and secondary (condylar) cartilages of the mandible, resulting in mandibular hypoplasia and dysmorphogenesis. These defects are likely related to a defective chondrocyte proliferation and differentiation and pan-FGFR tyrosine kinase inhibitor NVP-BGJ398 corrects Meckel’s and condylar cartilages defects ex vivo. Moreover, we show that low dose of NVP-BGJ398 improves in vivo condyle growth and corrects dysmorphologies in Fgfr3Y367C/+ mice, suggesting that postnatal treatment with NVP-BGJ398 mice might offer a new therapeutic strategy to improve mandible anomalies in ACH and others FGFR3-related disorders. PMID:27260401

Development of a measurement system for the mechanical load of functional appliances.

PubMed

Shimazaki, Aya; Kimura, Hitoshi; Inou, Norio; Maki, Koutaro

2017-10-03

Devices called functional appliances are commonly used in orthodontics for treating maxillary protrusion. These devices mechanically force the mandible forward to apply traction force to the mandibular condyle. This promotes cartilaginous growth in the small mandible. However, no studies have clarified how much traction force is applied to the mandibular condyle. Moreover, it remains unknown as to how anatomical characteristics affect this traction force. Therefore, in this study, we developed a device for measuring the amount of force generated while individual patients wore functional appliances, and we investigated the relationship between forces with structures surrounding the mandibular condyle. We compared traction force values with cone-beam computed tomography image data in eight subjects. The functional appliance resulted in a traction force of 339-1477gf/mm, with a mean value of 196.5gf/mm for the elastic modulus of the mandible. A comparison with cone-beam computed tomography image data suggested that the mandibular traction force was affected by the mandibular condyle and shape of the articular eminence. This method can contribute to discovering efficient treatment techniques more suited to individual patients. Copyright © 2017 Elsevier Ltd. All rights reserved.

Mechanical implications of the mandibular coronoid process morphology in Neandertals.

PubMed

Marom, Assaf; Rak, Yoel

2018-06-01

Among the diagnostic features of the Neandertal mandible are the broad base of the coronoid process and its straight posterior margin. The adaptive value of these (and other) anatomical features has been linked to the Neandertal's need to cope with a large gape. The present study aims to test this hypothesis with regard to the morphology of the coronoid process. This admittedly simple, intuitive hypothesis was tested here via a comparative finite-element study of the primitive versus modified state of the coronoid process, using two-dimensional models of the mandible. Our simulations demonstrate that a large gape has an unfavorable effect on the primitive state of the coronoid process: the diagonal, almost horizontal, component of the temporalis muscle resultant (relative to the long axis of the coronoid process) bends the process in the sagittal plane. Furthermore, we show that the modification of the coronoid process morphology alone reduces the process' bending in a wide gape increasing the compression to tension ratio. These results provide indirect evidence in support of the hypothesis that the modification of the coronoid process in Neandertals is necessary for enabling their mandible to cope with a large gape. © 2018 Wiley Periodicals, Inc.

Direct radiocarbon dating and genetic analyses on the purported Neanderthal mandible from the Monti Lessini (Italy).

PubMed

Talamo, Sahra; Hajdinjak, Mateja; Mannino, Marcello A; Fasani, Leone; Welker, Frido; Martini, Fabio; Romagnoli, Francesca; Zorzin, Roberto; Meyer, Matthias; Hublin, Jean-Jacques

2016-07-08

Anatomically modern humans replaced Neanderthals in Europe around 40,000 years ago. The demise of the Neanderthals and the nature of the possible relationship with anatomically modern humans has captured our imagination and stimulated research for more than a century now. Recent chronological studies suggest a possible overlap between Neanderthals and anatomically modern humans of more than 5,000 years. Analyses of ancient genome sequences from both groups have shown that they interbred multiple times, including in Europe. A potential place of interbreeding is the notable Palaeolithic site of Riparo Mezzena in Northern Italy. In order to improve our understanding of prehistoric occupation at Mezzena, we analysed the human mandible and several cranial fragments from the site using radiocarbon dating, ancient DNA, ZooMS and isotope analyses. We also performed a more detailed investigation of the lithic assemblage of layer I. Surprisingly we found that the Riparo Mezzena mandible is not from a Neanderthal but belonged to an anatomically modern human. Furthermore, we found no evidence for the presence of Neanderthal remains among 11 of the 13 cranial and post-cranial fragments re-investigated in this study.

Direct radiocarbon dating and genetic analyses on the purported Neanderthal mandible from the Monti Lessini (Italy)

PubMed Central

Talamo, Sahra; Hajdinjak, Mateja; Mannino, Marcello A.; Fasani, Leone; Welker, Frido; Martini, Fabio; Romagnoli, Francesca; Zorzin, Roberto; Meyer, Matthias; Hublin, Jean-Jacques

2016-01-01

Anatomically modern humans replaced Neanderthals in Europe around 40,000 years ago. The demise of the Neanderthals and the nature of the possible relationship with anatomically modern humans has captured our imagination and stimulated research for more than a century now. Recent chronological studies suggest a possible overlap between Neanderthals and anatomically modern humans of more than 5,000 years. Analyses of ancient genome sequences from both groups have shown that they interbred multiple times, including in Europe. A potential place of interbreeding is the notable Palaeolithic site of Riparo Mezzena in Northern Italy. In order to improve our understanding of prehistoric occupation at Mezzena, we analysed the human mandible and several cranial fragments from the site using radiocarbon dating, ancient DNA, ZooMS and isotope analyses. We also performed a more detailed investigation of the lithic assemblage of layer I. Surprisingly we found that the Riparo Mezzena mandible is not from a Neanderthal but belonged to an anatomically modern human. Furthermore, we found no evidence for the presence of Neanderthal remains among 11 of the 13 cranial and post-cranial fragments re-investigated in this study. PMID:27389305

Obstructive Sleep Apnea Syndrome in a Pubescent Boy of Short Stature Was Improved with an Orthodontic Mandibular Advancement Oral Appliance: A Case Report

PubMed Central

Ito, Shin; Otake, Hironao; Tsuiki, Satoru; Miyao, Etsuko; Noda, Akiko

2015-01-01

We report a 16-year-old pubescent pediatric patient with obstructive sleep apnea syndrome (OSAS) and short stature whose apnea hypopnea index (AHI) was significantly reduced following the use of an orthodontic oral appliance that advances the mandible ventrally. The mandible was advanced 64% of the maximal mandibular protrusive position with use of the appliance over a 3-year period. The patient's AHI without the appliance in place decreased from 101.6/h at baseline to 11/h after treatment. Moreover, the patient's height increased 14 cm during treatment, resulting in height close to the average height for his age. Cephalometric analysis revealed an improvement in his retrognathic mandible and proclination of the upper front teeth. In conclusion, an orthodontic mandibular advancement oral appliance played an important role not only in improving the patient's OSAS but also in normalizing his physical growth during puberty. Citation: Ito S, Otake H, Tsuiki S, Miyao E, Noda A. Obstructive sleep apnea syndrome in a pubescent boy of short stature was improved with an orthodontic mandibular advancement oral appliance: a case report. J Clin Sleep Med 2015;11(1):75–76. PMID:25348240

Complications associated with the treatment of fractures of the dentate portion of the mandible in paediatric patients: a systematic review.

PubMed

Bobrowski, A N; Torriani, M A; Sonego, C L; Carvalho, P H deA; Post, L K; Chagas Júnior, O L

2017-04-01

This study aimed to answer the following question: What is the best treatment option for fractures of the dentate portion of the mandible in paediatric patients when considering the occurrence of postoperative complications? A systematic literature review was done using the PubMed, Scopus, and Cochrane Library databases, and 1186 articles on the topic were found. Twelve of these articles were included in the final review after the full texts had been read. A sample of 178 paediatric patients was obtained. In the six cases in which treatment was surgery with titanium plate fixation, there were no postoperative complications, whereas in the 141 cases in which treatment was surgery with biodegradable plates, there were 12 postoperative complications, and in the 31 cases in which treatment was non-surgical, there were three postoperative complications. A connection between the best treatment and the number of postoperative complications in fractures of the dentate portion of the mandible in paediatric patients could not be established; however, the occurrence of postoperative complications was low for both surgical and non-surgical treatments. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Sexual conflict over mating in Gnatocerus cornutus? Females prefer lovers not fighters.

PubMed

Okada, Kensuke; Katsuki, Masako; Sharma, Manmohan D; House, Clarissa M; Hosken, David J

2014-06-22

Female mate choice and male-male competition are the typical mechanisms of sexual selection. However, these two mechanisms do not always favour the same males. Furthermore, it has recently become clear that female choice can sometimes benefit males that reduce female fitness. So whether male-male competition and female choice favour the same or different males, and whether or not females benefit from mate choice, remain open questions. In the horned beetle, Gnatocerus cornutus, males have enlarged mandibles used to fight rivals, and larger mandibles provide a mating advantage when there is direct male-male competition for mates. However, it is not clear whether females prefer these highly competitive males. Here, we show that female choice targets male courtship rather than mandible size, and these two characters are not phenotypically or genetically correlated. Mating with attractive, highly courting males provided indirect benefits to females but only via the heritability of male attractiveness. However, mating with attractive males avoids the indirect costs to daughters that are generated by mating with competitive males. Our results suggest that male-male competition may constrain female mate choice, possibly reducing female fitness and generating sexual conflict over mating.

Lag screw fixation of anterior mandibular fractures: a retrospective analysis of intraoperative and postoperative complications.

PubMed

Tiwana, Paul S; Kushner, George M; Alpert, Brian

2007-06-01

To review, retrospectively, the outcomes of 102 patients who underwent lag screw technique fixation of fractures of the anterior mandible. A total of 102 consecutive, skeletally mature patients who have undergone open reduction internal fixation for fractures of the anterior mandible utilizing the lag screw technique were reviewed. All patients had a clinically mobile fracture between the mental foramina of the mandible. The patients were followed at usual postoperative intervals with shortest long-term follow-up of 2 months. Intraoperative and long-term postoperative outcomes including status of union, infection, and intraoperative surgical misadventure were recorded. Data from the 102 patients showed that there was 1 fixation failure due to inappropriate patient selection, 1 nonunion requiring bone grafting, 1 with infected screws but with union, 1 with an infected screw and delayed union treated conservatively, and 6 with broken drills from intraoperative surgical misadventures. Lag screw osteosynthesis of anterior mandibular fractures is a sensitive, facile, predictable, and relatively inexpensive method for internal fixation of indicated fractures. As with all methods of rigid internal fixation, most failures or complications are the result of operator judgment or technique.

A study of an assisting robot for mandible plastic surgery based on augmented reality.

PubMed

Shi, Yunyong; Lin, Li; Zhou, Chaozheng; Zhu, Ming; Xie, Le; Chai, Gang

2017-02-01

Mandible plastic surgery plays an important role in conventional plastic surgery. However, its success depends on the experience of the surgeons. In order to improve the effectiveness of the surgery and release the burden of surgeons, a mandible plastic surgery assisting robot, based on an augmented reality technique, was developed. Augmented reality assists surgeons to realize positioning. Fuzzy control theory was used for the control of the motor. During the process of bone drilling, both the drill bit position and the force were measured by a force sensor which was used to estimate the position of the drilling procedure. An animal experiment was performed to verify the effectiveness of the robotic system. The position error was 1.07 ± 0.27 mm and the angle error was 5.59 ± 3.15°. The results show that the system provides a sufficient accuracy with which a precise drilling procedure can be performed. In addition, under the supervision's feedback of the sensor, an adequate safety level can be achieved for the robotic system. The system realizes accurate positioning and automatic drilling to solve the problems encountered in the drilling procedure, providing a method for future plastic surgery.

Achievability of 3D planned bimaxillary osteotomies: maxilla-first versus mandible-first surgery.

PubMed

Liebregts, Jeroen; Baan, Frank; de Koning, Martien; Ongkosuwito, Edwin; Bergé, Stefaan; Maal, Thomas; Xi, Tong

2017-08-24

The present study was aimed to investigate the effects of sequencing a two-component surgical procedure for correcting malpositioned jaws (bimaxillary osteotomies); specifically, surgical repositioning of the upper jaw-maxilla, and the lower jaw-mandible. Within a population of 116 patients requiring bimaxillary osteotomies, the investigators analyzed whether there were statistically significant differences in postoperative outcome as measured by concordance with a preoperative digital 3D virtual treatment plan. In one group of subjects (n = 58), the maxillary surgical procedure preceded the mandibular surgery. In the second group (n = 58), the mandibular procedure preceded the maxillary surgical procedure. A semi-automated analysis tool (OrthoGnathicAnalyser) was applied to assess the concordance of the postoperative maxillary and mandibular position with the cone beam CT-based 3D virtual treatment planning in an effort to minimize observer variability. The results demonstrated that in most instances, the maxilla-first surgical approach yielded closer concordance with the 3D virtual treatment plan than a mandibular-first procedure. In selected circumstances, such as a planned counterclockwise rotation of both jaws, the mandible-first sequence resulted in more predictable displacements of the jaws.

Thin-plate spline graphical analysis of the mandible in mandibular prognathism.

PubMed

Chang, Hsin-Fu; Chang, Hong-Po; Liu, Pao-Hsin; Chang, Chih-Han

2002-11-01

The chin cup has been used to treat skeletal mandibular prognathism in growing patients for 200 years. The pull on the orthopedic-force chin cup is oriented along a line from the mandibular symphysis to the mandibular condyle. Various levels of success have been reported with this restraining device. The vertical chin cup produces strong vertical compression stress on the maxillary molar regions when the direction of traction is 20 degrees more vertical than the chin-condyle line. This treatment strategy may prevent relapse due to counter-clockwise rotation of the mandible. In this report, we describe a new strategy for using chin-cup therapy involving thin-plate spline (TPS) analysis of lateral cephalometric roentgenograms to visualize transformation of the mandible. The actual sites of mandibular skeletal change are not detectable with conventional cephalometric analysis. A case of mandibular prognathism treated with a chin cup and a case of dental Class III malocclusion without orthodontic treatment are described. The case analysis illustrates that specific patterns of mandibular transformation are associated with Class III malocclusion with or without orthopedic therapy, and that visualization of these deformations is feasible using TPS graphical analysis.

Analysis of Biomechanical Effects of Different Sites and Modes of Orthodontic Loading On Arch Expansion in a Preadolescent Mandible: An FEA Study.

PubMed

Haresh, Ajmera Deepal; Pradeep, Singh; Song, Jinlin; Wang, Chao; Fan, Yubo

2018-05-11

The aim of commencing treatment in younger age is to rectify the developing dento-alveolar, skeletal and muscular imbalances. With growing dependence on arch development and expansion, the pendulum is oscillating more towards the non-extraction treatment lately, in resolving constriction and crowding issues. Since, a limited number of attempts have been made for mandibular expansion, this study aimes to evaluate the effect of different modes and sites of loading on the expansion of preadolescent mandible using biomechanics. To address the research purpose, a total of 9 Finite Element models were simulated. Biomechanical response of the mandibular bone and dentition was analyzed under different loading conditions including site and mode, using the simulated FE models. The values of displacement envisaged by the FE models, predict hybrid mode to offer substantial expansion of the mandibular bone as compared to tooth borne and bone borne. In addition, biomechanical effect of site II on mandibular expansion in terms of displacement on X-axis, was significant. In conclusion, the results of our study suggest hybrid mode at site II to be better option for true bony expansion in preadolescent mandible.

Central Telangiectatic Osteosarcoma of the Mandible in a Paediatric Patient: A Rarity

PubMed Central

Tomar, Divya; Thayath, Muhamad Nishad; Zaidi, Iram; Singh, Shikha

2016-01-01

Osteosarcoma (OS) involving the head and neck region is rare and is a diagnostic challenge due to its aggressive nature and varied presentations. Although OS constitute 40% to 60% of all bone tumours, only 10% of these occur in the head and neck region, most commonly in the maxilla and mandible. OS of the jaw bone has a different pattern and behaviour when compared to OS at other anatomic location. It occurs in a more elderly population, less aggressive and usually spreads locally rather than distant metastases. Telangiectatic Osteosarcoma (TOS) of jaws in a paediatric patient is still a very rare variant and till date only two cases have been reported in literature. Radiographic evaluation plays an important role as the clinical symptoms are not specific to the condition. Conventional radiography should always be supplemented by advanced imaging modalities for the diagnosis, which gives a three dimensional assessment and also prevents superimposition of surrounding structures. Early diagnosis and radical surgery are the keys to high survival rates. Herein, we present a third ever reported case of TOS occurring in mandible of a nine-year-old male patient. PMID:28208989

Maxillo-Mandibular Cemento-ossifying Fibroma: A Rare Case Report.

PubMed

Peravali, Ranjit Kumar; Bhat, H Hari Kishore; Reddy, Sreenatha

2015-03-01

Cemento-ossifying fibroma (COF) is a benign fibro osseous lesion of the jaws which has been described as a demarcated or rarely encapsulated neoplasm consisting of fibrous tissue and varying amounts of mineralized material resembling bone and/or cementum (Dinkar et al. in IJDA 2(4):45-47, 2010). Majority of lesions occur in the mandible and only few cases of COFs of the maxillary sinus and bilateral COFs of the mandible have been reported in literature (Dinkar et al. in IJDA 2(4):45-47, 2010; Tamiolakis et al. in Acta Stomatol Croat 39(3):319-321, 2005; Hamner et al. in Oral Surg Oral Med Oral Pathol 26(4):579-587, 1968; Gunaseelan et al. in Oral Med Oral Pathol Oral Radiol Endod 104:e21-e25, 2007). These lesions have a very low recurrence rate (Ertug et al. in Quintessence Int 35(10):808-810, 2004) and are generally treated by enucleation. In this paper we present a rare case of COF occurring in both the maxilla and mandible of the same patient. Only one such case (Takeda and Fujioka in Int J Oral Maxillofac Surg 16(3):368-371, 1987) has been reported in literature so far.

[Study of dental attrition in a medieval adult population from Southwest France].

PubMed

Esclassan, R; Boimond, L; Sevin, A; Donat, R; Lucas, S; Grimoud, A M

2009-02-01

The aim of the authors was to study dental attrition in a medieval sample of paired mandibles and maxillas from the Southwest France (IX to XV century). We selected 58 adult individuals with maxillas and mandibles in good state of conservation, 29 women and 29 men from the medieval collection of Vilarnau-d'Amont (Western Pyrenees, France). Attrition was graded according to the Brabant index. We found a high prevalence of attrition in this sample. The first molars (M1) were the maxillary and mandibular teeth most concerned by attrition. The most frequent attrition level was level 2, with dentin exposure. We did not find any significant difference of tooth wear between maxillary and mandibular teeth, even if maxillary teeth seemed to be more worn. There was symmetry of attrition between the left and right side. There was no significant difference between men and women. Working on paired mandibles and maxillas showed that attrition in the middle age was a global phenomenon, intermaxillary and symmetric. It was much more severe than today, rapidly evolving and generalized because of the abrasive quality of food, cooking, chewing habits, and intensity of chewing pressure.

[Long-term follow-up study of titanium implant impact on pediatric mandibular growth and development].

PubMed

Hu, Yun; Li, Wei; Chen, Qi; Song, Fumin; Tang, Wei; Wang, Hang

2015-08-01

To explore the impact of titanium implant on the growth and development of pediatric mandible after suffering from mandibular fracture and undergoing open reduction and internal fixation (ORIF) compared with those that underwent titanium plate removal postoperatively. Fifteen pediatric patients with mandibular fracture who underwent ORIF were included in this study. Eight patients did not undergo titanium implant removal postoperatively, whereas the other seven patients underwent the routine. The postoperative data of the pediatrics were collected for comparative analysis by taking the patients' frontal and lateral photos, recording the inter-incisor distance, and measuring the height of mandibular ramus, length of the mandibular body, and combined length of the mandible in three-dimensional reconstruction image. All patients had acceptable facial contour, mouth opening, and occlusion, without obvious abnormalities. The radiography showed no significant difference between the bilateral mandibular lengths in the two groups of patients (P>0.05). The titanium plants have no significant impact on the growth and development of pediatric mandible postoperatively; hence, the question on whether the titanium plates should be removed or not may be neglected. The removal operation may lead to secondary trauma; thus, performing titanium plate removal routinely is not recommended.

Short mandible - a possible risk factor for cleft palate with/without a cleft lip.

PubMed

Hermann, N V; Darvann, T A; Ersbøll, B K; Kreiborg, S

2014-05-01

To estimate the influence of a short mandible on the risk of developing a cleft palate with/without a cleft lip (CP). The retrospective sample consisted of 115 2-month-old Danish infants with CP, and 70 control infants with unilateral incomplete cleft lip (UICL). Cephalometric X-rays were obtained. Mandibular length (Lm ) was measured and corrected for body length (Lb ) to remove influence of varying body length in the sample. Logistic regression was applied to the corrected mandibular length (Lmc ) to calculate the risk of having a cleft palate. The mean mandibular length in the group with CP was about 4 mm shorter than in the control group. Odds ratio (OR) was calculated to be 0.58 (95% confidence interval 0.48-0.68), implying that an individual's risk of cleft palate with/without a cleft lip increases about 50% per mm decrease in mandibular length. A special facial type including a short mandible is a possible risk factor for cleft palate, and it was found that the risk of cleft palate increases 58% per mm decreases in mandibular length. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Implant-supported mandibular splinting affects temporomandibular joint biomechanics.

PubMed

Zaugg, Balthasar; Hämmerle, Christoph H F; Palla, Sandro; Gallo, Luigi M

2012-08-01

Mandibular functional movements lead to complex deformations of bony structures. The aim of this study was to test whether mandibular splinting influences condylar kinematics and temporomandibular joint (TMJ) loading patterns. Six subjects were analyzed by means of dynamic stereometry during jaw opening-closing with mandibles unconstrained as well as splinted transversally by a cast metal bar fixed bilaterally to two implant pairs in the (pre)molar region. Statistical analysis was performed by means of ANOVAs for repeated measurements (significance level α=0.05). Transversal splinting reduced mandibular deformation during jaw opening-closing as measured between two implants in the (pre)molar region on each side of the mandible significantly by 54%. Furthermore, splinting significantly reduced the distance between lateral condylar poles (average displacement vector magnitude of each pole: 0.84±0.36 mm; average mediolateral displacement component: 45±28% of the magnitude) and led to a medial displacement of their trajectories as well as a mediolateral displacement of stress-field paths. During jaw opening-closing, splinting of the mandible leads to a significant reduction of mandibular deformation and intercondylar distance and to altered stress-field paths, resulting in changed loading patterns of the TMJ structures. © 2011 John Wiley & Sons A/S.

A two-stage rule-constrained seedless region growing approach for mandibular body segmentation in MRI.

PubMed

Ji, Dong Xu; Foong, Kelvin Weng Chiong; Ong, Sim Heng

2013-09-01

Extraction of the mandible from 3D volumetric images is frequently required for surgical planning and evaluation. Image segmentation from MRI is more complex than CT due to lower bony signal-to-noise. An automated method to extract the human mandible body shape from magnetic resonance (MR) images of the head was developed and tested. Anonymous MR images data sets of the head from 12 subjects were subjected to a two-stage rule-constrained region growing approach to derive the shape of the body of the human mandible. An initial thresholding technique was applied followed by a 3D seedless region growing algorithm to detect a large portion of the trabecular bone (TB) regions of the mandible. This stage is followed with a rule-constrained 2D segmentation of each MR axial slice to merge the remaining portions of the TB regions with lower intensity levels. The two-stage approach was replicated to detect the cortical bone (CB) regions of the mandibular body. The TB and CB regions detected from the preceding steps were merged and subjected to a series of morphological processes for completion of the mandibular body region definition. Comparisons of the accuracy of segmentation between the two-stage approach, conventional region growing method, 3D level set method, and manual segmentation were made with Jaccard index, Dice index, and mean surface distance (MSD). The mean accuracy of the proposed method is [Formula: see text] for Jaccard index, [Formula: see text] for Dice index, and [Formula: see text] mm for MSD. The mean accuracy of CRG is [Formula: see text] for Jaccard index, [Formula: see text] for Dice index, and [Formula: see text] mm for MSD. The mean accuracy of the 3D level set method is [Formula: see text] for Jaccard index, [Formula: see text] for Dice index, and [Formula: see text] mm for MSD. The proposed method shows improvement in accuracy over CRG and 3D level set. Accurate segmentation of the body of the human mandible from MR images is achieved with the proposed two-stage rule-constrained seedless region growing approach. The accuracy achieved with the two-stage approach is higher than CRG and 3D level set.

Comprehensive Analysis of Mandibular Residual Asymmetry after Bilateral Sagittal Split Ramus Osteotomy Correction of Menton Point Deviation

PubMed Central

Lin, Qiuping; Huang, Xiaoqiong; Xu, Yue; Yang, Xiaoping

2016-01-01

Purpose Facial asymmetry often persists even after mandibular deviation corrected by the bilateral sagittal split ramus osteotomy (BSSRO) operation, since the reference facial sagittal plane for the asymmetry analysis is usually set up before the mandibular menton (Me) point correction. Our aim is to develop a predictive and quantitative method to assess the true asymmetry of the mandible after a midline correction performed by a virtual BSSRO, and to verify its availability by evaluation of the post-surgical improvement. Patients and Methods A retrospective cohort study was conducted at the Hospital of Stomatology, Sun Yat-sen University (China) of patients with pure hemi-mandibular elongation (HE) from September 2010 through May 2014. Mandibular models were reconstructed from CBCT images of patients with pre-surgical orthodontic treatment. After mandibular de-rotation and midline alignment with virtual BSSRO, the elongation hemi-mandible was virtually mirrored along the facial sagittal plane. The residual asymmetry, defined as the superimposition and boolean operation of the mirrored elongation side on the normal side, was calculated, including the volumetric differences and the length of transversal and vertical asymmetry discrepancy. For more specific evaluation, both sides of the hemi-mandible were divided into the symphysis and parasymphysis (SP), mandibular body (MB), and mandibular angle (MA) regions. Other clinical variables include deviation of Me point, dental midline and molar relationship. The measurement of volumetric discrepancy between the two sides of post-surgical hemi-mandible were also calculated to verify the availability of virtual surgery. Paired t-tests were computed and the P value was set at .05. Results This study included 45 patients. The volume differences were 407.8±64.8 mm3, 2139.1±72.5 mm3, and 422.5±36.9 mm3; residual average transversal discrepancy, 1.9 mm, 1.0 mm, and 2.2 mm; average vertical discrepancy, 1.1 mm, 2.2 mm, and 2.2 mm (before virtual surgery). The post-surgical volumetric measurement showed no statistical differences between bilateral mandibular regions. Conclusions Mandibular asymmetry persists after Me point correction. A 3D quantification of mandibular residual asymmetry after Me point correction and mandible de-rotation with virtual BSSRO sets up a true reference mirror plane for comprehensive asymmetry assessment of bilateral mandibular structure, thereby providing an accurate guidance for orthognathic surgical planning. PMID:27571364

Comprehensive Analysis of Mandibular Residual Asymmetry after Bilateral Sagittal Split Ramus Osteotomy Correction of Menton Point Deviation.

PubMed

Lin, Han; Zhu, Ping; Lin, Qiuping; Huang, Xiaoqiong; Xu, Yue; Yang, Xiaoping

2016-01-01

Facial asymmetry often persists even after mandibular deviation corrected by the bilateral sagittal split ramus osteotomy (BSSRO) operation, since the reference facial sagittal plane for the asymmetry analysis is usually set up before the mandibular menton (Me) point correction. Our aim is to develop a predictive and quantitative method to assess the true asymmetry of the mandible after a midline correction performed by a virtual BSSRO, and to verify its availability by evaluation of the post-surgical improvement. A retrospective cohort study was conducted at the Hospital of Stomatology, Sun Yat-sen University (China) of patients with pure hemi-mandibular elongation (HE) from September 2010 through May 2014. Mandibular models were reconstructed from CBCT images of patients with pre-surgical orthodontic treatment. After mandibular de-rotation and midline alignment with virtual BSSRO, the elongation hemi-mandible was virtually mirrored along the facial sagittal plane. The residual asymmetry, defined as the superimposition and boolean operation of the mirrored elongation side on the normal side, was calculated, including the volumetric differences and the length of transversal and vertical asymmetry discrepancy. For more specific evaluation, both sides of the hemi-mandible were divided into the symphysis and parasymphysis (SP), mandibular body (MB), and mandibular angle (MA) regions. Other clinical variables include deviation of Me point, dental midline and molar relationship. The measurement of volumetric discrepancy between the two sides of post-surgical hemi-mandible were also calculated to verify the availability of virtual surgery. Paired t-tests were computed and the P value was set at .05. This study included 45 patients. The volume differences were 407.8±64.8 mm3, 2139.1±72.5 mm3, and 422.5±36.9 mm3; residual average transversal discrepancy, 1.9 mm, 1.0 mm, and 2.2 mm; average vertical discrepancy, 1.1 mm, 2.2 mm, and 2.2 mm (before virtual surgery). The post-surgical volumetric measurement showed no statistical differences between bilateral mandibular regions. Mandibular asymmetry persists after Me point correction. A 3D quantification of mandibular residual asymmetry after Me point correction and mandible de-rotation with virtual BSSRO sets up a true reference mirror plane for comprehensive asymmetry assessment of bilateral mandibular structure, thereby providing an accurate guidance for orthognathic surgical planning.

[Clinical evaluation of "All-on-Four" provisional prostheses reinforced with carbon fibers].

PubMed

Li, Bei-bei; Lin, Ye; Cui, Hong-yan; Hao, Qiang; Xu, Jia-bin; Di, Ping

2016-02-18

To assess the clinical effects of carbon fiber reinforcement on the "All-on-Four" provisional prostheses. Provisional prostheses were divided into control group and carbon fiber reinforcing group according to whether carbon fiber reinforcement was used in the provisional prostheses base resin. In our study, a total of 60 patients (32 males and 28 females) with 71 provisional prostheses(28 maxilla and 43 mandible)were enrolled between April 2008 and December 2012 for control group; a total of 23 patients (13 males and 10 females) with 28 provisional prostheses (9 maxillas and 19 mandibles) were enrolled between January 2013 and March 2014 for carbon fiber reinforcing group. The information of provisional prostheses in the patients was recorded according to preoperative examination. We used the date of definitive prosthesis restoration as the cut-off point, observing whether fracture occurred on the provisional prostheses in the two groups. Additionally we observed whether fiber exposure occurred on the tissue surface of the provisional prostheses and caused mucosal irritation. The interface between the denture base resin and the fibers was examined using scanning electron microscopy (SEM). The age [(57.3 ± 10.1) years vs.(55.1 ± 11.4) years], gender (32 males and 28 females vs. 13 males and 10 females), maxilla and mandible distributions (28 maxillas and 43 mandibles vs. 9 maxillas and 19 mandibles), the number of extraction jaws (46 vs. 23), the average using time [(7.8 ± 1.3) months vs. (7.5 ± 1.1) months], and the opposing dentition distributions of provisional prostheses of the patients showed no significant differences between the control and reinforcing groups. There were 21(29.6%) fractures that occurred on the 71 provisional prostheses in the control group; there was no fracture that occurred on the 28 provisional prosthesesin the carbon fiber reinforcing group. The fracture rate of the carbon fiber reinforcing group was significantly lower than that of the control group (P=0.001). No carbon fiber exposure and mucosal irritation were observed from clinical examination.SEM revealed relatively continuous contact between the fiber and acrylic resin, and the resin particles adhered on the surface of the carbon fibers. The addition of carbon fibers between abutments placed on "All-on-Four" provisional fixed denture base resin may be clinically effective in preventing "All-on-Four" denture fracture and can provide several advantages for clinical use.

Polymorphous low grade adenocarcinoma presenting an uncommon radiographic aspect.

PubMed

de Magalhães, M H C G; de Magalhães, R P; de Araújo, V C; de Sousa, S O M

2006-05-01

The aim of this study was to present clinical, histological and immunohistochemical aspects of a polymorphous low grade adenocarcinoma occurring in the mandible. A radiolucent tumour, located in the right mandible, was removed from a 40-year-old woman. Radiographic and CT exams revealed that the lesion expanded bucco-lingual cortical plates and presented an irregular scalloping of the bone. The surrounding lining mucosa was intact. The patient underwent total surgical removal of the lesion with an intraoperative biopsy. Histological diagnosis was polymorphous low-grade adenocarcinoma confirmed by immunohistochemical study. One-year follow up was uneventful. The accurate diagnosis of lesions presenting unusual clinical aspects, as the one presented here, is critical for correctly handling treatment.

Fractures of the growing mandible.

PubMed

Kushner, George M; Tiwana, Paul S

2009-03-01

Oral and maxillofacial surgeons must constantly weigh the risks of surgical intervention for pediatric mandible fractures against the wonderful healing capacity of children. The majority of pediatric mandibular fractures can be managed with closed techniques using short periods of maxillomandibular fixation or training elastics alone. Generally, the use of plate- and screw-type internal fixation is reserved for difficult fractures. This article details general and special considerations for this surgery including: craniofacial growth & development, surgical anatomy, epidemiology evaluation, various fractures, the role rigid internal fixation and the Risdon cable in pediatric maxillofacial trauma. It concludes with suggestions concerning long-term follow-up care in light of the mobility, insurance obstacles, and family dynamics facing the patient population.

Supercomputer use in orthopaedic biomechanics research: focus on functional adaptation of bone.

PubMed

Hart, R T; Thongpreda, N; Van Buskirk, W C

1988-01-01

The authors describe two biomechanical analyses carried out using numerical methods. One is an analysis of the stress and strain in a human mandible, and the other analysis involves modeling the adaptive response of a sheep bone to mechanical loading. The computing environment required for the two types of analyses is discussed. It is shown that a simple stress analysis of a geometrically complex mandible can be accomplished using a minicomputer. However, more sophisticated analyses of the same model with dynamic loading or nonlinear materials would require supercomputer capabilities. A supercomputer is also required for modeling the adaptive response of living bone, even when simple geometric and material models are use.

Malunited fracture of the body and condyle of the mandible : A Case Report.

PubMed

Yeluri, Ramakrishna; Baliga, Sudhindra; Munshi, Autar Krishen

2010-07-01

Mandibular fractures are the most common facial fractures seen in hospitalized children and their incidence increases with age. Treatment options include soft diet, intermaxillary fixation with eyelet wires, arch bars, circummandibular wiring, or stents. Alternative options include open reduction and internal fixation through either an intraoral or extraoral approach. Many factors complicate the management of pediatric mixed-dentition mandibular fractures: tooth eruption, short roots, developing tooth buds and growth issues. One major factor is the inherent instability of the occlusion in the mixed deciduous-permanent tooth phase. This case report documents a child in mixed dentition period with a complication arising due to direct fixation of the fractured mandible.

Anterior mandibular ameloblastoma

PubMed Central

Bhandarwar, Ajay H.; Bakhshi, Girish D.; Borisa, Ashok D.; Wagh, Amol; Kapoor, Rajat; Kori, Channabasappa G.

2012-01-01

Ameloblastoma is a benign odontogenic tumor. These are usually asymptomatic until a large size is attained. Ameloblastoma has tendency to spread locally and has a high recurrence rate. Majority of ameloblastomas (80%) arise from the mandible. Ameloblastoma arising from anterior mandibular region (symphysis-menti) is rare. Very few cases of midline anterior ameloblastomas are reported in the literature. They often require wide local excision. Reconstruction of mandible in these cases is challenging. We present a case of mandibular ameloblastoma arising from symphysis-menti. Patient underwent wide surgical excision of the tumor followed by immediate reconstruction using free fibular vascular flap, stabilized with titanium reconstructive plates. A brief case report ands review of literature is presented. PMID:24765429

Finite element analysis of stress distribution on the mandible and condylar fracture osteosynthesis during various clenching tasks.

PubMed

Hijazi, Loai; Hejazi, Wael; Darwich, Mhd Ayham; Darwich, Khaldoun

2016-12-01

The purpose of the study was to evaluate the effect of clenching tasks on the stress and strain of condylar osteosynthesis screws and plates, as well as on the stress, strain distribution and displacement on the whole mandible and bone surrounding screws. Three-dimensional finite element models of the mandible, two straight four-hole plates and eight screws were established. Six static clenching tasks were simulated in this study: incisal clench (INC), intercuspal position (ICP), right unilateral molar clench (RMOL), left unilateral molar clench (LMOL), right group function (RGF) and left group function (LGF). Based on the simulation of the six clenching tasks, none of the inserted screws and plates were broken or bended. For the whole mandibular bone, the maximum von Mises stress and von Mises strain observed were yielded by the ICP. For the bone surrounding the inserted screws, the maximum von Mises stress and von Mises strain were yielded by the LMOL (49.2 MPa and 3795.1 μ). Clenching tasks had significant effects on the stress distribution on the condylar osteosynthesis and the bone surrounding screws. Contralateral occlusion task (LMOL) had the maximal results of von Mises stress and strain and healing problems could be occur, this result confirms the importance of soft diet after surgery.

The teeth of the horse: evolution and anatomo-morphological and radiographic study of their development in the foetus.

PubMed

Soana, S; Gnudi, G; Bertoni, G

1999-12-01

The aim of this work was to study the ontogenetic process in teeth from their early appearance in the ossifying matrix of the mandible and maxilla, in different foetuses of scalar ages. Radiographic examinations of the skull and mandible hemisections were performed and the latero-medial (LM) and dorsoventral (DV) projections for the skull and mandible were analysed. A high-definition film-screen combination was used for this study. The exposure values ranged from 35 kV/6 mAs to 58 kV/10 mAs, according to the size of the skulls and their degree of ossification. The first dental germ observed was the P3, at 138-140 days of pregnancy. At 146 days, P2 and P4 dental germs were visible. At 160-168 days, the dental germ of the first deciduous incisor tooth (I1) appeared; at 180-188 days of pregnancy the germ of the second (I2), and at 224 days the germ of the third (I3), were detectable. At 275 days the dental germ of the mandibular first molar tooth (M1) appeared, while the maxillary M1, which was not visible radiographically, was represented by a jelly-like amorphous body within its alveolar cavity.

Meckel's and condylar cartilages anomalies in achondroplasia result in defective development and growth of the mandible.

PubMed

Biosse Duplan, Martin; Komla-Ebri, Davide; Heuzé, Yann; Estibals, Valentin; Gaudas, Emilie; Kaci, Nabil; Benoist-Lasselin, Catherine; Zerah, Michel; Kramer, Ina; Kneissel, Michaela; Porta, Diana Grauss; Di Rocco, Federico; Legeai-Mallet, Laurence

2016-07-15

Activating FGFR3 mutations in human result in achondroplasia (ACH), the most frequent form of dwarfism, where cartilages are severely disturbed causing long bones, cranial base and vertebrae defects. Because mandibular development and growth rely on cartilages that guide or directly participate to the ossification process, we investigated the impact of FGFR3 mutations on mandibular shape, size and position. By using CT scan imaging of ACH children and by analyzing Fgfr3 Y367C/+ mice, a model of ACH, we show that FGFR3 gain-of-function mutations lead to structural anomalies of primary (Meckel's) and secondary (condylar) cartilages of the mandible, resulting in mandibular hypoplasia and dysmorphogenesis. These defects are likely related to a defective chondrocyte proliferation and differentiation and pan-FGFR tyrosine kinase inhibitor NVP-BGJ398 corrects Meckel's and condylar cartilages defects ex vivo. Moreover, we show that low dose of NVP-BGJ398 improves in vivo condyle growth and corrects dysmorphologies in Fgfr3 Y367C/+ mice, suggesting that postnatal treatment with NVP-BGJ398 mice might offer a new therapeutic strategy to improve mandible anomalies in ACH and others FGFR3-related disorders. © The Author 2016. Published by Oxford University Press.

[Mandibular reconstruction with fibula free flap. Experience of virtual reconstruction using Osirix®, a free and open source software for medical imagery].

PubMed

Albert, S; Cristofari, J-P; Cox, A; Bensimon, J-L; Guedon, C; Barry, B

2011-12-01

The techniques of free tissue transfers are mainly used for mandibular reconstruction by specialized surgical teams. This type of reconstruction is mostly realized in matters of head and neck cancers affecting mandibular bone and requiring a wide surgical resection and interruption of the mandible. To decrease the duration of the operation, surgical procedure involves generally two teams, one devoted to cancer resection and the other one to raise the fibular flap and making the reconstruction. For a better preparation of this surgical procedure, we propose here the use of a medical imaging software enabling mandibular reconstructions in three dimensions using the CT-scan done during the initial disease-staging checkup. The software used is Osirix®, developed since 2004 by a team of radiologists from Geneva and UCLA, working on Apple® computers and downloadable free of charge in its basic version. We report here our experience of this software in 17 patients, with a preoperative modelling in three dimensions of the mandible, of the segment of mandible to be removed. It also forecasts the numbers of fragments of fibula needed and the location of osteotomies. Copyright © 2009 Elsevier Masson SAS. All rights reserved.

Prototyped grafting plate for reconstruction of mandibular defects.

PubMed

Zhou, Libin; Wang, Peilin; Han, Haolun; Li, Baowei; Wang, Hongnan; Wang, Gang; Zhao, Jinlong; Liu, Yanpu; Wu, Wei

2014-12-01

To esthetically and functionally restore a 40-mm canine mandibular discontinuity defect using a custom-made titanium bone-grafting plate in combination with autologous iliac bone grafts. Individualized titanium bone-grafting plates were manufactured using a series of techniques, including reverse engineering, computer aided design, rapid prototyping and titanium casting. A 40-mm discontinuous defect in the right mandibular body was created in 9 hybrid dogs. The defect was restored immediately using the customized plate in combination with autologous cancellous iliac blocks. Sequential radionuclide bone imaging was performed to evaluate the bone metabolism and reconstitution of the grafts. The specimens were evaluated by biomechanical testing, 3-dimensional microcomputed tomographic scanning, and histological examination. The results revealed that the symmetry of the mandibles was reconstructed using the customized grafting plate, and the bony continuity of the mandibles was restored. By 12 weeks after the operation, the cancellous iliac grafts became a hard bone block, which was of comparable strength to native mandibles. A fibrous tissue intermediate was found between the remodelled bone graft and the titanium plate. The results indicate that the prototyped grafting plate can be used to restore mandibular discontinuous defects, and satisfactory aesthetical and functional reconstruction can be achieved. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Maxillary and mandibular anterior crown width/height ratio and its relation to various arch perimeters, arch length, and arch width groups

PubMed Central

Shahid, Fazal; Alam, Mohammad Khursheed; Khamis, Mohd Fadhli

2015-01-01

Objective: To investigate the maxillary and mandibular anterior crown width/height ratio and its relation to various arch perimeters, arch length, and arch width (intercanine, interpremolar, and intermolar) groups. Materials and Methods: The calculated sample size was 128 subjects. The crown width/height, arch length, arch perimeter, and arch width of the maxilla and mandible were obtained via digital calliper (Mitutoyo, Japan). A total of 4325 variables were measured. The sex differences in the crown width and height were evaluated. Analysis of variance was applied to evaluate the differences between arch length, arch perimeter, and arch width groups. Results: Males had significantly larger mean values for crown width and height than females (P ≤ 0.05) for maxillary and mandibular arches, both. There were no significant differences observed for the crown width/height ratio in various arch length, arch perimeter, and arch width (intercanine, interpremolar, and intermolar) groups (P ≤ 0.05) in maxilla and mandible, both. Conclusions: Our results indicate sexual disparities in the crown width and height. Crown width and height has no significant relation to various arch length, arch perimeter, and arch width groups of maxilla and mandible. Thus, it may be helpful for orthodontic and prosthodontic case investigations and comprehensive management. PMID:26929686

Accessory mental foramina and nerves: Application to periodontal, periapical, and implant surgery.

PubMed

Iwanaga, Joe; Watanabe, Koichi; Saga, Tsuyoshi; Tabira, Yoko; Kitashima, Sadaharu; Kusukawa, Jingo; Yamaki, Koh-Ichi

2016-05-01

Recent studies investigating accessory mental foramina using developments in diagnostic imaging have primarily defined the morphology of the foramina; however, few studies have described the structures passing through them. Additional clinical knowledge of the foramina is therefore required for preoperative diagnosis prior to surgery, including implant, periodontal and periapical surgery. In this study, we investigated the accessory mental foramina and the associated nerves and arteries in donated cadaveric mandibles using anatomical and radiological observation methods. We examined 63 mandibles with overlying soft tissue by cone-beam computed tomography and noted the existence of the accessory mental foramina. Mandibles with accessory mental foramina were subsequently analyzed. Additionally, the neurovascular bundles passing through these foramina were dissected using anatomical methods.The incidence of accessory mental foramina was 14.3%. The larger foramina tended to be located anteriorly or superiorly and proximal to the mental foramen, while the smaller foramina tended to be located posterosuperiorly and distal to the mental foramen. The mental foramen ipsilateral to the accessory mental foramen was smaller than the one contralateral to it. The comparatively distant and large accessory mental foramen included an artery.This study elucidated the relationship between accessory mental foramina and the associated nerves and arteries. We believe that the results will contribute to the clinical dentistry field. © 2015 Wiley Periodicals, Inc.

Wound ballistics of the pig mandibular angle: a preliminary finite element analysis and experimental study.

PubMed

Chen, Yubin; Miao, Yingyun; Xu, Chuan; Zhang, Gang; Lei, Tao; Tan, Yinghui

2010-04-19

To study wound ballistics of the mandibular angle, a combined hexahedral-tetrahedral finite element (FE) model of the pig mandible was developed to simulate ballistic impact. An experimental study was carried out by measuring impact load parameters from 14 fresh pig mandibles that were shot at the mandibular angle by a standard 7.62 mm M43 bullet. FE analysis was executed through the LS-DYNA code under impact loads similar to those obtained from the experimental study. The resulting residual velocity, the transferred energy from the bullet to the mandible, and the surface area of the entrance wound had no statistical differences between the FE simulation and the experimental study. However, the mean surface area of the exit wounds in the experimental study was significantly larger than that in the simulation. According to the FE analysis, the stress concentrated zones were mainly located at the region of impact, condylar neck, coronoid process and mandibular body. The simulation results also indicated that trabecular bone had less stress concentration and a lower speed of stress propagation compared with cortical bone. The FE model is appropriate and conforms to the basic principles of wound ballistics. This modeling system will be helpful for further investigations of the biomechanical mechanisms of wound ballistics. Copyright 2009 Elsevier Ltd. All rights reserved.

The intervals method: a new approach to analyse finite element outputs using multivariate statistics

PubMed Central

De Esteban-Trivigno, Soledad; Püschel, Thomas A.; Fortuny, Josep

2017-01-01

Background In this paper, we propose a new method, named the intervals’ method, to analyse data from finite element models in a comparative multivariate framework. As a case study, several armadillo mandibles are analysed, showing that the proposed method is useful to distinguish and characterise biomechanical differences related to diet/ecomorphology. Methods The intervals’ method consists of generating a set of variables, each one defined by an interval of stress values. Each variable is expressed as a percentage of the area of the mandible occupied by those stress values. Afterwards these newly generated variables can be analysed using multivariate methods. Results Applying this novel method to the biological case study of whether armadillo mandibles differ according to dietary groups, we show that the intervals’ method is a powerful tool to characterize biomechanical performance and how this relates to different diets. This allows us to positively discriminate between specialist and generalist species. Discussion We show that the proposed approach is a useful methodology not affected by the characteristics of the finite element mesh. Additionally, the positive discriminating results obtained when analysing a difficult case study suggest that the proposed method could be a very useful tool for comparative studies in finite element analysis using multivariate statistical approaches. PMID:29043107

determination of sex in south african blacks by discriminant function analysis of mandibular linear dimensions : A preliminary investigation using the zulu local population.

PubMed

Franklin, Daniel; O'Higgins, Paul; Oxnard, Charles E; Dadour, Ian

2006-12-01

The determination of sex is a critical component in forensic anthropological investigation. The literature attests to numerous metrical standards, each utilizing diffetent skeletal elements, for sex determination in South A frican Blacks. Metrical standards are popular because they provide a high degree of expected accuracy and are less error-prone than subjective nonmetric visual techniques. We note, however, that there appears to be no established metric mandible discriminant function standards for sex determination in this population.We report here on a preliminary investigation designed to evaluate whether the mandible is a practical element for sex determination in South African Blacks. The sample analyzed comprises 40 nonpathological Zulu individuals drawn from the R.A. Dart Collection. Ten linear measurements, obtained from mathematically trans-formed three-dimensional landmark data, are analyzed using basic univariate statistics and discriminant function analyses. Seven of the 10 measurements examined are found to be sexually dimorphic; the dimensions of the ramus are most dimorphic. The sex classification accuracy of the discriminant functions ranged from 72.5 to 87.5% for the univariate method, 92.5% for the stepwise method, and 57.5 to 95% for the direct method. We conclude that the mandible is an extremely useful element for sex determination in this population.

A new species of Deltaspis Audinet-Serville (Coleoptera: Cerambycidae: Cerambycinae) from Mexico.

PubMed

Eya, Bryan K

2017-03-27

As currently defined, the genus Deltaspis Audinet-Serville, 1834, contains 16 species ranging in distribution from the southwestern United States to eastern Mexico. However, the generic distinction between Deltaspis and its closely allied genera, such as Crossidius LeConte, 1851 and Muscidora Thomson, 1864, is in need of clarification. According to Audinet-Serville, Deltaspis is so named due to its distinctive triangular scutellum (i.e., Δετα, delta, ασπιζ écusson), which is actually a commonly shared character of all these genera. Members of the tribe Trachyderini Dupont (1836), which includes the above genera, also have mandibles with an emarginate-truncate apex with the edge chisel-like or bifid. This modification of mouthpart appears to be for consumption of pollen and/or petals from composite flowers visited by the adult beetles (Krenn et al., 2005; Beierl & Barchet-Beierl, 1999). Other genera from this tribe with this modification of mandibles from North America, and mostly from Mexico, include: Chemsakiella Monné, 2006, Giesbertia Chemsak & Linsley, 1984, Hoegea Bates, 1885, Neocrossidius Chemsak, 1959, Paroxoplus Chemsak, 1959, Plionoma Casey, 1912, Schizax LeConte, 1873, and Tylosis LeConte, 1850. The remainder of Trachyderini genera have unmodified or simple mandibles with apex acute.

Maxillofacial Injuries in Children: A 10 year Retrospective Study.

PubMed

Kambalimath, H V; Agarwal, S M; Kambalimath, Deepashri H; Singh, Mamta; Jain, Neha; Michael, P

2013-06-01

Fractures of facial bones in children are relatively uncommon although both children and adults are subjected to similar types of injuries. This study aims to evaluate the epidemiology of facial bone fractures among children under 14 years, their management and outcome. This retrospective study included maxillofacial injuries treated in 112 children under 14 years admitted due to maxillofacial injuries during the period from 2001 to 2011. Of them ten (8.93 %) were below 5 years, 44 (39.29 %) between 6 and 10 years and 58 (51.78 %) between 11 and 14 years of age. Male to female ratio was 1.8:1. Fall from a height was the most common etiology. The most common jaw involved in the fracture was the mandible. Conservative management was done in 83.04 % of cases and open reduction and internal fixation was performed in 16.96 % of cases. Five (4.46 %) cases accounted for post-operative wound infection. Fracture of the mandible is the most common maxillofacial injury in children, most often caused by fall from a height. The osteogenic potential of the mandible in children leads to conservative management of these fractures. Opportunities for prevention of maxillofacial trauma should be taken into consideration by parents and care takers.

Sequencing of bimaxillary surgery in the correction of vertical maxillary excess: retrospective study.

PubMed

Salmen, F S; de Oliveira, T F M; Gabrielli, M A C; Pereira Filho, V A; Real Gabrielli, M F

2018-06-01

The aim of this study was to evaluate the precision of bimaxillary surgery performed to correct vertical maxillary excess, when the procedure is sequenced with mandibular surgery first or maxillary surgery first. Thirty-two patients, divided into two groups, were included in this retrospective study. Group 1 comprised patients who received bimaxillary surgery following the classical sequence with repositioning of the maxilla first. Patients in group 2 received bimaxillary surgery, but the mandible was operated on first. The precision of the maxillomandibular repositioning was determined by comparison of the digital prediction and postoperative tracings superimposed on the cranial base. The data were tabulated and analyzed statistically. In this sample, both surgical sequences provided adequate clinical accuracy. The classical sequence, repositioning the maxilla first, resulted in greater accuracy for A-point and the upper incisor edge vertical position. Repositioning the mandible first allowed greater precision in the vertical position of pogonion. In conclusion, although both surgical sequences may be used, repositioning the mandible first will result in greater imprecision in relation to the predictive tracing than repositioning the maxilla first. The classical sequence resulted in greater accuracy in the vertical position of the maxilla, which is key for aesthetics. Copyright © 2017 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Thin-plate spline analysis of craniofacial growth in Class I and Class II subjects.

PubMed

Franchi, Lorenzo; Baccetti, Tiziano; Stahl, Franka; McNamara, James A

2007-07-01

To compare the craniofacial growth characteristics of untreated subjects with Class II division 1 malocclusion with those of subjects with normal (Class I) occlusion from the prepubertal through the postpubertal stages of development. The Class II division 1 sample consisted of 17 subjects (11 boys and six girls). The Class I sample also consisted of 17 subjects (13 boys and four girls). Three craniofacial regions (cranial base, maxilla, and mandible) were analyzed on the lateral cephalograms of the subjects in both groups by means of thin-plate spline analysis at T1 (prepubertal) and T2 (postpubertal). Both cross-sectional and longitudinal comparisons were performed on both size and shape differences between the two groups. The results showed an increased cranial base angulation as a morphological feature of Class II malocclusion at the prepubertal developmental phase. Maxillary changes in either shape or size were not significant. Subjects with Class II malocclusion exhibited a significant deficiency in the size of the mandible at the completion of active craniofacial growth as compared with Class I subjects. A significant deficiency in the size of the mandible became apparent in Class II subjects during the circumpubertal period and it was still present at the completion of active craniofacial growth.

Third molar impaction and agenesis: influence on anterior crowding.

PubMed

Esan, Temitope; Schepartz, Lynne A

2017-02-01

Background Third molar influence on anterior crowding is controversial, but they are assumed to play a major role in compromising dental arch space. Aim To evaluate the relationship among impaction, agenesis and crowding in black South African males. Subjects and method Mandibles and maxillae of 535 black South African males in the Raymond A. Dart Collection of Human Skeletons, University of the Witwatersrand were examined for anterior crowding and third molar agenesis and impaction. Dental crowding was determined using Little's irregularity index. Results Individuals with impaction showed more moderate-to-extreme crowding than those with agenesis. Bilateral third molar presence was more frequently associated with ideal-to-minimal crowding. Weak positive but significant correlations between crowding and impaction were found (mandible, ρ = 0.154, p = 0.000; maxilla ρ = 0.130, p = 0.000). The direction was the opposite for bilateral presence of molars (mandible, ρ = -0.135, p = 0.02; maxilla, ρ = -0.111, p = 0.010). Odds of mandibular crowding were greatest in individuals with impaction (OR = 3.22, CI = 1.716-6.05, p < 0.001). Maxillary results were similar. Conclusion Third molar impaction plays a role in anterior crowding. Third molar presence was not associated with anterior crowding, while agenesis did not explain absence of crowding.

Sexual dimorphism and allometry in the sphecophilous rove beetle Triacrus dilatus.

PubMed

Marlowe, Maxwell H; Murphy, Cheryl A; Chatzimanolis, Stylianos

2015-01-01

The rove beetle Triacrus dilatus is found in the Atlantic forest of South America and lives in the refuse piles of the paper wasp Agelaia vicina. Adults of T. dilatus are among the largest rove beetles, frequently measuring over 3 cm, and exhibit remarkable variation in body size. To examine sexual dimorphism and allometric relationships we measured the length of the left mandible, ocular distance and elytra. We were interested in determining if there are quantifiable differences between sexes, if there are major and minor forms within each sex and if males exhibit mandibular allometry. For all variables, a t-test was run to determine if there were significant differences between the sexes. Linear regressions were run to examine if there were significant relationships between the different measurements. A heterogeneity of slopes test was used to determine if there were significant differences between males and females. Our results indicated that males had significantly larger mandibles and ocular distances than females, but the overall body length was not significantly different between the sexes. Unlike most insects, both sexes showed positive linear allometric relationships for mandible length and head size (as measured by the ocular distance). We found no evidence of major and minor forms in either sex.

Maxillary overdentures supported by anteriorly or posteriorly placed implants opposed by a natural dentition in the mandible: a 1-year prospective case series study.

PubMed

Slot, Wim; Raghoebar, Gerry M; Vissink, Arjan; Meijer, Henny J A

2014-02-01

For maxillary overdenture therapy, treatment guidelines are missing. There is a need for longitudinal studies. The purpose of this 1-year prospective case series study was to assess the treatment outcome of maxillary overdentures supported by six dental implants opposed by natural antagonistic teeth in the mandible. Fifty patients were treated with a maxillary overdenture supported by six dental implants, either placed in the anterior region (n = 25 patients) or in the posterior region (n = 25 patients). Items of evaluation were the following: survival of implants, condition of hard and soft peri-implant tissues, and patients' satisfaction. One-year implant survival rate was 98% in the anterior group and 99.3% in the posterior group. Mean radiographic bone loss in the anterior and posterior groups after 1 year of loading was 0.22 and 0.50 mm, respectively. Mean scores for plaque, calculus, gingiva, bleeding, and pocket probing depth were low, and patients' satisfaction was high, with no differences between the groups. Six dental implants placed in either the anterior region or the posterior region of the edentulous maxilla, connected with a bar, and opposed by antagonistic teeth in the mandible supply a proper base for the support of an overdenture. © 2012 Wiley Periodicals, Inc.

Clinical evaluation of immediate loading of electroeroded screw-retained titanium fixed prostheses supported by tilted implant: a multicenter retrospective study.

PubMed

Acocella, Alessandro; Ercoli, Carlo; Geminiani, Alessandro; Feng, Changyong; Billi, Mauro; Acocella, Gabriele; Giannini, Domenico; Sacco, Roberto

2012-05-01

Immediate occlusal loading of dental implants in the edentulous mandible has proven to be an effective, reliable, and predictable treatment protocol. However, there is limited long-term data available in the literature, when an electroeroded definitive cast-titanium fixed prosthesis is used for this treatment protocol. The aim of this study was to evaluate the clinical effectiveness of dental implants (Astra Tech Dental, Mölndal, Sweden) in the edentulous mandible immediately loaded with an electroeroded cast-titanium screw-retained fixed prosthesis. Forty-five patients received five implants each in the interforaminal area. All the implants were inserted with torque up to 40 Ncm and the distal implants were distally tilted approximately 20 to 30 degrees to minimize the length of posterior cantilevers. Implants were loaded within 48 hours of placement with an acrylic resin-titanium screw-retained prosthesis fabricated by electroerosion. Two of the 225 inserted implants failed after 3 and 16 months of healing, respectively, with a cumulative survival rate of 99.1% and a prosthetic survival rate of 97.8%. Immediate loading of tilted dental implants inserted in the edentulous mandible with a screw-retained titanium definitive prosthesis fabricated with electrical discharge machining provide reliable and predictable results. © 2011 Wiley Periodicals, Inc.

Accelerated bone formation on photo-induced hydrophilic titanium implants: an experimental study in the dog mandible.

PubMed

Hirakawa, Yuko; Jimbo, Ryo; Shibata, Yasuaki; Watanabe, Ikuya; Wennerberg, Ann; Sawase, Takashi

2013-08-01

The purpose of this study was to investigate the effect of photo-induced hydrophilic titanium dioxide (TiO₂) on serum fibronectin (sFN) attachment, and further to evaluate initial osseointegration responses in the dog mandibles. To apply the anatase TiO₂ film, plasma source ion implantation (PSII) method followed by annealing was employed for the titanium disks and implants, which were then illuminated with UV-A for 24 h for the experimental groups. Non-deposited titanium disks and implants were prepared for the control group. Surface characterization was performed using the interferometer and contact angle analyzer. The attachments of sFN were evaluated using fluorescence emission analysis. Thereafter both groups of implants were placed in the mandible of six beagle dogs. Bone response was investigated with histological and histomorphometrical analyses after periods of 2 and 4 weeks. The experimental groups exhibited strong hydrophilicity under UV-A illumination and showed significant improvement in sFN attachment. And further, the experimental implants enhanced the bone formation with the bone-to-implant contact of 42.7% after 2 weeks of healing (control: 28.4%). The combined applications of plasma fibronectin and PSII to produce hydrophilic titanium surfaces could accelerate early osseointegration. © 2012 John Wiley & Sons A/S.

Bone up: craniomandibular development and hard-tissue biomineralization in neonate mice.

PubMed

Thompson, Khari D; Weiss-Bilka, Holly E; McGough, Elizabeth B; Ravosa, Matthew J

2017-10-01

The presence of regional variation in the osteogenic abilities of cranial bones underscores the fact that the mechanobiology of the mammalian skull is more complex than previously recognized. However, the relationship between patterns of cranial bone formation and biomineralization remains incompletely understood. In four strains of mice, micro-computed tomography was used to measure tissue mineral density during perinatal development in three skull regions (calvarium, basicranium, mandible) noted for variation in loading environment, embryological origin, and ossification mode. Biomineralization levels increased during perinatal ontogeny in the mandible and calvarium, but did not increase in the basicranium. Tissue mineral density levels also varied intracranially, with density in the mandible being highest, in the basicranium intermediate, and in the calvarium lowest. Perinatal increases in, and elevated levels of, mandibular biomineralization appear related to the impending postweaning need to resist elevated masticatory stresses. Similarly, perinatal increases in calvarial biomineralization may be linked to ongoing brain expansion, which is known to stimulate sutural bone formation in this region. The lack of perinatal increase in basicranial biomineralization could be a result of earlier developmental maturity in the cranial base relative to other skull regions due to its role in supporting the brain's mass throughout ontogeny. These results suggest that biomineralization levels and age-related trajectories throughout the skull are influenced by the functional environment and ontogenetic processes affecting each region, e.g., onset of masticatory loads in the mandible, whereas variation in embryology and ossification mode may only have secondary effects on patterns of biomineralization. Knowledge of perinatal variation in tissue mineral density, and of normal cranial bone formation early in development, may benefit clinical therapies aiming to correct developmental defects and traumatic injuries in the skull, and more generally characterize loading environments and skeletal adaptations in mammals by highlighting the need for multi-level analyses for evaluating functional performance of cranial bone. Copyright © 2017 Elsevier GmbH. All rights reserved.

Evaluation of pharyngeal space and its correlation with mandible and hyoid bone in patients with different skeletal classes and facial types.

PubMed

Nejaim, Yuri; Aps, Johan K M; Groppo, Francisco Carlos; Haiter Neto, Francisco

2018-06-01

The purpose of this article was to evaluate the pharyngeal space volume, and the size and shape of the mandible and the hyoid bone, as well as their relationships, in patients with different facial types and skeletal classes. Furthermore, we estimated the volume of the pharyngeal space with a formula using only linear measurements. A total of 161 i-CAT Next Generation (Imaging Sciences International, Hatfield, Pa) cone-beam computed tomography images (80 men, 81 women; ages, 21-58 years; mean age, 27 years) were retrospectively studied. Skeletal class and facial type were determined for each patient from multiplanar reconstructions using the NemoCeph software (Nemotec, Madrid, Spain). Linear and angular measurements were performed using 3D imaging software (version 3.4.3; Carestream Health, Rochester, NY), and volumetric analysis of the pharyngeal space was carried out with ITK-SNAP (version 2.4.0; Cognitica, Philadelphia, Pa) segmentation software. For the statistics, analysis of variance and the Tukey test with a significance level of 0.05, Pearson correlation, and linear regression were used. The pharyngeal space volume, when correlated with mandible and hyoid bone linear and angular measurements, showed significant correlations with skeletal class or facial type. The linear regression performed to estimate the volume of the pharyngeal space showed an R of 0.92 and an adjusted R 2 of 0.8362. There were significant correlations between pharyngeal space volume, and the mandible and hyoid bone measurements, suggesting that the stomatognathic system should be evaluated in an integral and nonindividualized way. Furthermore, it was possible to develop a linear regression model, resulting in a useful formula for estimating the volume of the pharyngeal space. Copyright © 2018 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Comparison of the accuracy of cone beam computed tomography and medical computed tomography: implications for clinical diagnostics with guided surgery.

PubMed

Abboud, Marcus; Calvo-Guirado, Jose Luis; Orentlicher, Gary; Wahl, Gerhard

2013-01-01

This study compared the accuracy of cone beam computed tomography (CBCT) and medical-grade CT in the context of evaluating the diagnostic value and accuracy of fiducial marker localization for reference marker-based guided surgery systems. Cadaver mandibles with attached radiopaque gutta-percha markers, as well as glass balls and composite cylinders of known dimensions, were measured manually with a highly accurate digital caliper. The objects were then scanned using a medical-grade CT scanner (Philips Brilliance 64) and five different CBCT scanners (Sirona Galileos, Morita 3D Accuitomo 80, Vatech PaX-Reve3D, 3M Imtech Iluma, and Planmeca ProMax 3D). The data were then imported into commercially available software, and measurements were made of the scanned markers and objects. CT and CBCT measurements were compared to each other and to the caliper measurements. The difference between the CBCT measurements and the caliper measurements was larger than the difference between the CT measurements and the caliper measurements. Measurements of the cadaver mandible and the geometric reference markers were highly accurate with CT. The average absolute errors of the human mandible measurements were 0.03 mm for CT and 0.23 mm for CBCT. The measurement errors of the geometric objects based on CT ranged between 0.00 and 0.12 mm, compared to an error range between 0.00 and 2.17 mm with the CBCT scanners. CT provided the most accurate images in this study, closely followed by one CBCT of the five tested. Although there were differences in the distance measurements of the hard tissue of the human mandible between CT and CBCT, these differences may not be of clinical significance for most diagnostic purposes. The fiducial marker localization error caused by some CBCT scanners may be a problem for guided surgery systems.

A prospective evaluation of open face masks for head and neck radiation therapy.

PubMed

Wiant, David; Squire, Sarah; Liu, Han; Maurer, Jacqueline; Lane Hayes, T; Sintay, Benjamin

Head and neck (HN) radiation therapy patients are typically immobilized with closed thermoplastic masks that cover the face and may cause discomfort. In this work, we examine the use of open masks for HN radiation therapy. Fifty HN patients were prospectively randomized into 2 groups (25 closed masks, 25 open masks). The open-mask group was monitored with surface imaging to evaluate intrafraction motion. Both groups underwent daily volumetric imaging. All daily images were rigidly registered to their respective planning images to evaluate spinal canal and mandible position as a check for interfraction posture change. Posture changes were determined by the amount the spinal canal and mandible contours from the planning images had to be expanded to cover the structures on each daily image set. The vector length (VL) of the intrafraction linear translations, spine, and mandible positions for each open-mask patient were checked for correlation with fraction number using the Pearson r value. All patients were given a weekly survey ranking anxiety and claustrophobia from 0 to 10 (0 = no issue, 10 = extreme issue). The mean VL for all open-mask patients was 0.9 ± 0.5 mm (1 standard deviation). Only 1 patient showed significant correlation between VL and fraction number. The mean contour expansions to cover the spine and mandible were 1.5 ± 0.9 mm and 1.8 ± 1.3 mm for the closed-mask group, and 1.6 ± 0.8 mm and 1.8 ± 1.1 mm for the open-mask group. Both groups showed similar behavior relative to fraction number. The mean anxiety and claustrophobia scores were 1.63 and 1.44 for the closed-mask group, and 0.81 and 0.63 for the open-mask group. The groups were not significantly different. Open masks provide comparable immobilization and posture preservation to closed masks for HN radiation therapy. Copyright © 2016 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.

CNC-milled titanium frameworks supported by implants in the edentulous jaw: a 10-year comparative clinical study.

PubMed

Örtorp, Anders; Jemt, Torsten

2012-03-01

No long-term clinical studies covering more than 5 years are available on Computer Numeric Controlled (CNC) milled titanium frameworks. To evaluate and compare the clinical and radiographic performance of implant-supported prostheses provided with CNC titanium frameworks in the edentulous jaw with prostheses with cast gold-alloy frameworks during the first 10 years of function. Altogether, 126 edentulous patients were by random provided with 67 prostheses with titanium frameworks (test) in 23 maxillas and 44 mandibles, and with 62 prostheses with gold-alloy castings (control) in 31 maxillas and 31 mandibles. Clinical and radiographic 10-year data were collected for the groups and statistically compared on patient level. The 10-year prosthesis and implant cumulative survival rate was 95.6% compared with 98.3%, and 95.0% compared with 97.9% for test and control groups, respectively (p > .05). No implants were lost after 5 years of follow-up. Smokers lost more implants than nonsmokers after 5 years of follow-up (p < .01). Mean marginal bone loss in the test group was 0.7 mm (SD 0.61) and 0.7 mm (SD 0.85) in the maxilla and mandible, with similar pattern in the control group (p > .05), respectively. One prosthesis was lost in each group due to loss of implants, and one prosthesis failed due to framework fracture in the test group. Two metal fractures were registered in each group. More appointments of maintenance were needed for the prostheses in the maxilla compared with those in the mandible (p < .001). The frequency of complications was low with similar clinical and radiological performance for both groups during 10 years. CNC-milled titanium frameworks are a viable alternative to gold-alloy castings for restoring patients with implant-supported prostheses in the edentulous jaw. © 2009 Wiley Periodicals, Inc.

Rehabilitation of postrior atrophic edentulous jaws: prostheses supported by 5 mm short implants or by longer implants in augmented bone? One-year results from a pilot randomised clinical trial.

PubMed

Esposito, Marco; Pellegrino, Gerardo; Pistilli, Roberto; Felice, Pietro

2011-01-01

To evaluate whether 5 mm short dental implants could be an alternative to augmentation with anorganic bovine bone and placement of at least 10 mm long implants in posterior atrophic jaws. Fifteen patients with bilateral atrophic mandibles (5-7 mm bone height above the mandibular canal), and 15 patients with bilateral atrophic maxillae (4-6 mm bone height below the maxillary sinus) and bone thickness of at least 8 mm, were randomised according to a splitmouth design to receive one to three 5 mm short implants or at least 10 mm long implants in augmented bone. Mandibles were vertically augmented with interpositional bone blocks and maxillary sinuses with particulated bone via a lateral window. Implants were placed after 4 months, submerged and loaded, after 4 months, with provisional prostheses. Four months later, definitive provisionally cemented prostheses were delivered. Outcome measures were: prosthesis and implant failures, any complication and peri-implant marginal bone level changes. In 5 augmented mandibles, the planned 10 mm long implants could not be placed and shorter implants (7 and 8.5 mm) had to be used instead. One year after loading no patient dropped out. Two long (8.5 mm in the mandible and 13 mm in the maxilla) implants and one 5 mm short maxillary implant failed. There were no statistically significant differences in failures or complications. Patients with short implants lost on average 1 mm of peri-implant bone and patients with longer implants lost 1.2 mm. This difference was statistically significant. This pilot study suggests that 1 year after loading, 5 mm short implants achieve similar if not better results than longer implants placed in augmented bone. Short implants might be a preferable choice to bone augmentation since the treatment is faster, cheaper and associated with less morbidity, however their long-term prognosis is unknown.

Clinical application of micro-implant anchorage in initial orthodontic retraction.

PubMed

Wahabuddin, Shaji; Mascarenhas, Rohan; Iqbal, Mahamad; Husain, Akhter

2015-02-01

Micro-implant is a device that is temporarily fixed to bone for the purpose of enhancing orthodontic anchorage either by supporting the teeth of the reactive unit or by obviating the need for the reactive unit altogether, and which is subsequently removed after use. The purpose of this study was to evaluate the clinical efficiency of micro-implants in reinforcing anchorage during the initial retraction of anterior teeth, check the rate of initial retraction for 8 weeks, and assess the stability of micro-implants during this period. Eighteen micro-implants were placed (10 in the maxilla and 8 in the mandible) and immediately loaded with 200-250 g of force using 9-mm closed coil Nitinol springs. The amount of space closure was measured every 2 weeks until the eighth week. Cephalometric measurements were made at the end of the study to evaluate anchor loss, if any. Micro-implant stability was also assessed. The rate of initial retraction in the maxilla at the end of 8 weeks was 1.65 mm/quadrant and 1.51 mm/quadrant in the mandible. The amount of retraction on the left side of the arches was 1.66 mm/quadrant and 1.49 mm/quadrant on the right side. The average initial retraction for both arches per month was 0.78 mm. An anchor loss of 0.1 mm (0.06%) was observed in the maxilla while no mandibular anchor loss was recorded. The rate of initial retraction observed in the maxilla was more than that achieved in the mandible. Initial retraction was also more on the left side of the arches. There was no anchor loss in the mandible. The micro-implant-reinforced anchorage was helpful in minimizing anchor loss and accepted heavy traction forces but did not bring about a faster rate of retraction.

Restoration of Oral Function for Adult Edentulous Patients with Ectodermal Dysplasia: A Prospective Preliminary Clinical Study.

PubMed

Wu, Yiqun; Wang, Xu Dong; Wang, Feng; Huang, Wei; Zhang, Zhiyong; Zhang, Zhiyuan; Kaigler, Darnell; Zou, Duohong

2015-10-01

Therapy with zygomatic implants (ZIs) or conventional implants (CIs) has proven to be an effective method to restore oral function for systemically healthy patients. However, it is still a major challenge to fully restore oral function to edentulous adult patients with ectodermal dysplasia (ED). The aim of this study was to determine an effective treatment protocol for restoring oral function using ZIs and CIs to edentulous adult ED patients. Ten edentulous adult ED patients were treated in this study. The treatment protocol involved the following: (1) bone augmentation in the region of the anterior teeth; (2) placement of two ZIs and four CIs in the maxilla, and four CIs in the mandible; (3) fabrication of dental prosthesis; and (4) psychological and oral education. Following treatment of these patients, implant success rates, biological complications, patient satisfaction, and psychological changes were recorded. Although there was evidence of bone graft resorption in the maxilla, bone augmentation of the mandible was successful in all patients. Nine CIs in the maxilla failed and were removed. All ZIs were successful, and the CIs success rates were 77.50% in the maxilla and 100% in the mandible, with a mean of 88.75%. The mean peri-implant bone resorption for the CIs ranged from 1.3 ± 0.4 mm to 1.8 ± 0.6 mm, and four cases exhibited gingival hyperplasia in the maxilla and mandible. One hundred percent of the patients were satisfied with the restoration of their oral function, and >50% of the patients exhibited enhanced self-confidence and self-esteem. This study demonstrates that oral function can be restored in edentulous adult ED patients using a comprehensive and systematic treatment protocol involving psychological and oral education, bone augmentation, implant placement, and denture fabrication. Despite these positive outcomes, bone augmentation remains challenging in the anterior region of the maxilla for edentulous adult ED patients. © 2015 Wiley Periodicals, Inc.

Relationship between mandibular anatomy and the occurrence of a bad split upon sagittal split osteotomy.

PubMed

Aarabi, Mohammadali; Tabrizi, Reza; Hekmat, Mina; Shahidi, Shoaleh; Puzesh, Ayatollah

2014-12-01

A bad split is a troublesome complication of the sagittal split osteotomy (SSO). The aim of this study was to evaluate the relation between the occurrence of a bad split and mandibular anatomy in SSO using cone-beam computed tomography. The authors designed a cohort retrospective study. Forty-eight patients (96 SSO sites) were studied. The buccolingual thickness of the retromandibular area (BLR), the buccolingual thickness of the ramus at the level of the lingula (BLTR), the height of the mandible from the alveolar crest to the inferior border of the mandible, (ACIB), the distance between the sigmoid notch and the inferior border of the mandible (SIBM), and the anteroposterior width of the ramus (APWR) were measured. The independent t test was applied to compare anatomic measurements between the group with and the group without bad splits. The receiver operating characteristic (ROC) test was used to find a cutoff point in anatomic size for various parts of the mandible related to the occurrence of bad splits. The mean SIBM was 47.05±6.33 mm in group 1 (with bad splits) versus 40.66±2.44 mm in group 2 (without bad splits; P=.01). The mean BLTR was 5.74±1.11 mm in group 1 versus 3.19±0.55 mm in group 2 (P=.04). The mean BLR was 14.98±2.78 mm in group 1 versus 11.21±1.29 mm in group 2 (P=.001). No statistically significant difference was found for APWR and ACIB between the 2 groups. The ROC test showed cutoff points of 10.17 mm for BLR, 36.69 mm for SIBM, and 4.06 mm for BLTR. This study showed that certain mandibular anatomic differences can increase the risk of a bad split during SSO surgery. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Does Guided Bone Regeneration Prevent Unfavorable Bone Shapes in Distraction Gap?

PubMed

Demetoglu, Umut; Alkan, Alper; Kiliç, Erdem; Ozturk, Mustafa; Bilge, Suheyb

2018-03-01

Complications related to distraction osteogenesis can cause degradation of newly regenerated bone. Additionally, an unfavorable shape of the regenerated bone at the distraction gap can reduce the quantity of regenerated bone. The aim of the present study was to report on the prevention of unfavorable shapes of regenerated bone using guided bone regeneration during distraction. Bilateral alveolar distraction was performed in 10 beagle dog mandibles. One side of the mandible formed the experimental group and the other side served as the control group. In the experimental group, guided bone regeneration was performed simultaneously with distraction osteogenesis. In the control group, only alveolar distraction was applied. At the end of a 1-week latent period, all mandibles were distracted 10 mm (1 mm/day). After the distraction period, 3 months were allowed for consolidation. After consolidation, all the dogs were euthanized, and the shape of the regenerated bone was determined to be either favorable or unfavorable. Densitometric evaluation and area measurements were performed using computed tomography scans. Statistical evaluation was performed using the independent t test, with a significance level of P < .05. In the experimental group, no unfavorable bone shape developed in the distraction gap, and the new bone had a surface and volume similar to those of the segments. In contrast, in the control group, 4 mandibles had an unfavorable bone shape in the distraction gap and 4 showed favorable bone healing with no defect. The surface area of the regenerating bone in the experimental group was significantly greater than that in the control group. Also, the surface area differed significantly between the experimental and control groups (P < .05). However, the densitometric values did not differ between the 2 groups (P < .05). Concomitant use of guided bone regeneration with distraction osteogenesis could be an optimal method for generating a favorable bone shape within the distraction gap. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Accuracy of a Computer-Aided Surgical Simulation (CASS) Protocol for Orthognathic Surgery: A Prospective Multicenter Study

PubMed Central

Hsu, Sam Sheng-Pin; Gateno, Jaime; Bell, R. Bryan; Hirsch, David L.; Markiewicz, Michael R.; Teichgraeber, John F.; Zhou, Xiaobo; Xia, James J.

2012-01-01

Purpose The purpose of this prospective multicenter study was to assess the accuracy of a computer-aided surgical simulation (CASS) protocol for orthognathic surgery. Materials and Methods The accuracy of the CASS protocol was assessed by comparing planned and postoperative outcomes of 65 consecutive patients enrolled from 3 centers. Computer-generated surgical splints were used for all patients. For the genioplasty, one center utilized computer-generated chin templates to reposition the chin segment only for patients with asymmetry. Standard intraoperative measurements were utilized without the chin templates for the remaining patients. The primary outcome measurements were linear and angular differences for the maxilla, mandible and chin when the planned and postoperative models were registered at the cranium. The secondary outcome measurements were: maxillary dental midline difference between the planned and postoperative positions; and linear and angular differences of the chin segment between the groups with and without the use of the template. The latter was measured when the planned and postoperative models were registered at mandibular body. Statistical analyses were performed, and the accuracy was reported using root mean square deviation (RMSD) and Bland and Altman's method for assessing measurement agreement. Results In the primary outcome measurements, there was no statistically significant difference among the 3 centers for the maxilla and mandible. The largest RMSD was 1.0mm and 1.5° for the maxilla, and 1.1mm and 1.8° for the mandible. For the chin, there was a statistically significant difference between the groups with and without the use of the chin template. The chin template group showed excellent accuracy with largest positional RMSD of 1.0mm and the largest orientational RSMD of 2.2°. However, larger variances were observed in the group not using the chin template. This was significant in anteroposterior and superoinferior directions, as in pitch and yaw orientations. In the secondary outcome measurements, the RMSD of maxillary dental midline positions was 0.9mm. When registered at the body of the mandible, the linear and angular differences of the chin segment between the groups with and without the use of the chin template were consistent with the results found in the primary outcome measurements. Conclusion Using the CASS protocol, the computerized plan can be accurately and consistently transferred to the patient to position the maxilla and mandible at the time of surgery. The computer-generated chin template provides more accuracy in repositioning the chin segment than the intraoperative measurements. PMID:22695016

The Effect of Functional Mandibular Shift on the Muscle Spindle Systems in Head-Neck Muscles and the Related Neurotransmitter Histamine.

PubMed

Du, Bing-Li; Li, Jiang-Ning; Guo, Hong-Ming; Li, Song; Liu, Biao

2017-09-01

The aim of this study is to explore the effects of abnormal occlusion and functional recovery caused by functional mandible deviation on the head and neck muscles and muscle spindle sensory-motor system by electrophysiological response and endogenous monoamine neurotransmitters' distribution in the nucleus of the spinal tract. Seven-week-old male Wistar rats were randomly divided into 7 groups: normal control group, 2W experimental control group, 2W functional mandible deviation group, 2W functional mandible deviation recovery group, 4W experimental control group, 4W functional mandible deviation group, 4W functional mandible deviation recovery group. Chewing muscles, digastric muscle, splenius, and trapezius muscle spindles electrophysiological response activities at the opening and closing state were recorded. And then the chewing muscles, digastric, splenius, trapezius, and neck trigeminal nucleus were taken for histidine decarboxylase (HDC) detection by high performance liquid chromatography (HPLC), immunofluorescence, and reverse-transcription polymerase chain reaction (RT-PCR). Histamine receptor proteins in the neck nucleus of the spinal tract were also examined by immunofluorescence and RT-PCR. Electromyography activity of chewing muscles, digastric, and splenius muscle was significantly asymmetric; the abnormal muscle electromyography activity was mainly detected at the ipsilateral side. After functional mandibular deviation, muscle sensitivity on the ipsilateral sides of the chewing muscle and splenius decreased, muscle excitement weakened, modulation depth decreased, and the muscle spindle afferent impulses of excitation transmission speed slowed down. Changes for digastric muscle electrical activity were contrary. The functions recovered at different extents after removing the deflector. However, trapezius in all the experimental groups and recovery groups exhibited bilateral symmetry electrophysiological responses, and no significant difference compared with the control group. After functional mandibular deviation, HDC protein and messenger ribonucleic acid (mRNA) levels on the ipsilateral sides of the chewing muscle and splenius increased significantly. HDC level changes for digastric muscle were contrary. After the removal of the mandibular position deflector, HDC protein and mRNA levels decreased on the ipsilateral sides of the chewing muscle and splenius while they increased in the digastric muscle. The difference of histamine decarboxylase content in the bilateral trapezius in each experimental group was small. After functional mandibular deviation, the temporomandibular joint mechanical receptors not only caused the fusimotor fiber hypoallergenic fatigue slow response on the ipsilateral sides of splenius, but also increased the injury neurotransmitter histamine release. The authors' results further support the opinion that the temporomandibular joint receptors may be involved in the mechanical theory of the head and neck muscles nervous system regulation.

Analysis of body mass index, the mandible, and dental alveolar arch factors in prediction of mandibular third molar impaction: a pilot study.

PubMed

Akinbami, Babatunde O; Didia, Blessing C

2010-12-01

The aim of this study was to determine how some physical characteristics can be used to predict the occurrence of impacted mandibular third molars. While the concept of prophylactic removal of the asymptomatic erupting or impacted mandibular third molar has generated much controversy over the years, new theories of therapeutic surgical removal of the erupting tooth and therapeutic agenesis of the tooth bud are emerging. However, there are a few studies that address the anthropometric factors that could predict an impacted mandibular third molar. The study included Nigerian patients of both genders who were at least 16 years of age. A total of 83 subjects participated in the study; there were 44 (53 percent) females and 39 (47 percent) males. Eighty-one (97.6 percent) of the participants were between 16 and 23 years old, while 2 (2.4 percent) were between 30 and 39 years old, of which 44 (53 percent) were women and 39 (47 percent) were men. There were 38 (45.8 percent) cases of impaction and 45 (54.2 percent) cases of unimpacted third molar. The mean and standard deviation values of BMI for the two groups in males and females were 21.10±1.90, 22.40±2.70 and 22.00±2.40, 22.30±1.99 respectively, with no significant difference, p>0.05, CI 95%. The two determinant factors of impaction were mandibular length and the difference between alveolar arch length (p=0.04) and total teeth size. Both of these variables had significant inverse correlations with impaction values of p=0.04 and p=0.003, respectively. The prediction values were 59 percent for mandibular length and 81.9 percent for differences between mandibular length and teeth sizes, respectively. The synthesized prediction value by the two determinant factors is 75.6 percent.The subjects were divided into two categories: presence of impaction (Group 1) and absence of impaction (Group 2). Impaction of the mandibular third molar was assessed by clinical and radiographic evaluation. Body mass index (BMI) of each subject was determined by measuring the body weight (BW) and body height (BH), then dividing the weight of the body by the square of the height. The mandibular index (MI) was assessed by measuring the length and width of the mandible (MW). It was calculated by dividing the width of the mandible by the length of the mandible. The mandibular length (ML) consisted of the total teeth sizes of the three anterior teeth, the two premolars, and the first and second molars. These dimensions were measured with a divider/ruler and recorded. The anterior-posterior distance of the arch from the midline to the retromolar pad (alveolar arch length) also was measured. The prediction of mandibular third molar impaction was mainly dependent on two factors: the length of the mandible and the difference between arch length and total teeth size. Small mandible, small dental arch, and large teeth are risk factors that are strongly associated with the occurrence of impacted third molars.

Use of monocortical miniplates for the intraoral treatment of mandibular fractures.

PubMed

Chiodo, Thomas A; Milles, Maano

2009-03-01

Fixation of mandibular fractures using rigid hardware has gained wide acceptance over the past 3 decades. The goal of rigid internal fixation is to allow for fracture healing with limited, or no, time in maxillo-mandibular fixation. There has been significant evolution in plate and screw materials and design over the past 30 years. The term miniplate is used to describe a fracture plate with a screw diameter of 2.0 mm or less. With correct diagnosis and understanding of the forces affecting mandible fractures, miniplates can be applied transorally in various situations, allowing for less invasive treatment with open reduction of mandible fractures. This article describes the use of monocortical miniplates for the intraoral treatment of mandibular fractures.

A novel step osteotomy for correction of hemifacial microsomia - A case report.

PubMed

Howlader, Debraj; Bhutia, Dichen P; Vignesh, U; Mehrotra, Divya

2016-01-01

Facial asymmetry is one of the commonest facial anomalies, with reported incidence as high as 34%. Hemifacial microsomia (HFM) has an incidence of 1 in every 4000-5600 children and is one of the commonest causes of facial asymmetry. The standard treatment of HFM is orthognathic surgery by bilateral saggital split osteotomy (BSSO) or distraction osteogenesis (DO) of the mandible, both of which involve prolonged periods of occlusal adjustments by an orthodontist. Here, we present distraction of the mandible by means of a novel modified step osteotomy to correct the facial asymmetry in a case of hemifacial microsomia without disturbing the occlusion. This novel technique can prove to be a new tool in the maxillofacial surgeons armamentarium to treat facial asymmetry.

Overdenture retained by teeth using a definitive denture base technique: a case report.

PubMed

Nascimento, D F F; dos Santos, J F F; Marchini, L

2010-09-01

This paper presents a technique involving the use of a definitive denture base to make overdentures. Cores with ball attachments were cemented over remaining lower teeth. Impressions of the edentulous maxilla and mandible were taken to obtain a definitive acrylic resin base. The definitive base of the mandible was perforated at the location of ball attachments and its female components were fixed to the base using acrylic resin directly in the patient's mouth. Wax rims were then made, jaw relationships recorded, teeth mounted and tried in, and the dentures were cured. This technique allowed for easy fixing of female components and better retention during the recording of jaw relationships, and can also be used in the construction of implant retained dentures.

Reconstruction of the mandible bone by treatment of resected bone with pasteurization.

PubMed

Uehara, Masataka; Inokuchi, Tsugio; Sano, Kazuo; Sumita, Yoshinori; Tominaga, Kazuhiro; Asahina, Izumi

2012-11-01

The results of long-term follow-up for reimplantation of the mandibular bone treated with pasteurization are reported. Mandibulectomy was performed for mandibular malignancy in 3 cases. The resected bones were subsequently reimplanted after treatment with pasteurization in 3 cases to eradicate tumor cells involved in the resected bone. Although postoperative infection was observed in 2 of 3 cases, reimplantation of the resected mandibular bone treated by pasteurization was finally successful. Ten to 22 years of follow-up was carried out. Pasteurization was able to devitalize tumor cells involved in the resected bone and to preserve bone-inductive activity. Reimplantation of pasteurization could be a useful strategy for reconstruction of the mandible in patients with mandibular malignancy.

Interceptive orthopedics for the correction of maxillary transverse and sagittal deficiency in the early mixed dentition period

PubMed Central

Talapaneni, Ashok Kumar; Kumar, Karnati Praveen; Kommi, Pradeep Babu; Nuvvula, Sivakumar

2011-01-01

Dentofacial Orthopedics directed to a hypoplastic maxilla in the prepubertal period redirects growth of the maxilla in the vertical, transverse and sagittal planes of space. The orthopedic correction of maxillary hypoplasia in the early mixed dentition period thus intercepts the establishment of permanent structural asymmetry in the mandible and helps in the achievement of optimal dentofacial esthetics. This paper presents the growth redirection in a hypoplastic maxilla of an 8-year-old girl with simultaneous rapid maxillary expansion and protraction headgear therapy for a period of 11 months which corrected the posterior unilateral cross-bite, the positional asymmetry of the mandible and established an orthognathic profile in the individual. PMID:22346162

Chronic suppurative osteomyelitis of subcondylar region: a case report.

PubMed

Kumar, G Ravi; Syed, Basheer Ahmed; Prasad, N; Praveen, Sp

2013-05-01

Chronic suppurative osteomyelitis (CSO) of the maxillofacial region is primarily caused by infections of odontogenic microorganisms. It may also arise as a complication of dental extractions, maxillofacial trauma, inadequate treatment of a fracture and irradiation to the mandible. This condition is characterized by areas of devitalized bone (sequestra) which serves as a nidus for recurrent episodes of infection. This case report describes a case of CSO in an untreated right subcondylar fracture of the mandible which was successfully treated with a combination of antibiotic therapy and surgical debridement in an 8-year-old boy. How to cite this article: Kumar GR, Syed BA, Prasad N, Praveen SP. Chronic Suppurative Osteomyelitis of Subcondylar Region: A Case Report. Int J Clin Pediatr Dent 2013;6(2): 119-123.

Wide Linear Corticotomy and Anterior Segmental Osteotomy Under Local Anesthesia Combined Corticision for Correcting Severe Anterior Protrusion With Insufficient Alveolar Housing.

PubMed

Noh, Min-Ki; Lee, Baek-Soo; Kim, Shin-Yeop; Jeon, Hyeran Helen; Kim, Seong-Hun; Nelson, Gerald

2017-11-01

This article presents an alternate surgical treatment method to correct a severe anterior protrusion in an adult patient with an extremely thin alveolus. To accomplish an effective and efficient anterior segmental retraction without periodontal complications, the authors performed, under local anesthesia, a wide linear corticotomy and corticision in the maxilla and an anterior segmental osteotomy in mandible. In the maxilla, a wide linear corticotomy was performed under local anesthesia. In the maxillary first premolar area, a wide section of cortical bone was removed. Retraction forces were applied buccolingually with the aid of temporary skeletal anchorage devices. Corticision was later performed to close residual extraction space. In the mandible, an anterior segmental osteotomy was performed and the first premolars were extracted under local anesthesia. In the maxilla, a wide linear corticotomy facilitated a bony block movement with temporary skeletal anchorage devices, without complications. The remaining extraction space after the bony block movement was closed effectively, accelerated by corticision. In the mandible, anterior segmental retraction was facilitated by an anterior segmental osteotomy performed under local anesthesia. Corticision was later employed to accelerate individual tooth movements. A wide linear corticotomy and an anterior segmental osteotomy combined with corticision can be an effective and efficient alternative to conventional orthodontic treatment in the bialveolar protrusion patient with an extremely thin alveolar housing.

Histological examination and clinical evaluation of the jawbone of an adult patient with cleidocranial dysplasia: a case report

PubMed Central

Schnutenhaus, Sigmar; Luthardt, Ralph G; Rudolph, Heike; Götz, Werner

2015-01-01

Objectives: Cleidocranial dysplasia (CCD) is a rare congenital malformation syndrome, inherited autosomal-dominantly. During a course of treatment including surgical, implantological and restorative procedures, an opportunity arose to histologically examine biopsies of the maxilla and mandible of a CCD patient 47 years of age. Case report: The aim of this case report is to present the results of the histological evaluation of the alveolar bone and the surgical pretreatment for and placement of six implants each in the maxilla and the mandible. The implants were inserted in a minimally invasive procedure using 3D template guidance. Following uneventful healing of the implants, ceramically veneered bridges were cemented on individual titanium abutments. Since the patient had not received orthodontic treatment in childhood-which would have been the treatment modality of choice-this implantological and prosthodontic approach was necessary. Biopsies were taken from the maxilla and the mandible before placing the implants. Histological evaluation showed bone with strong, coarsely interconnecting trabeculae, especially in the maxilla. Both the bone and the gingiva otherwise exhibited a normal structure without pathological features or anomalies. Conclusion: The clinical parameters and histological evaluation of this one clinical case suggest that the concepts familiar from general oral implantology in terms of surgical and prosthetic procedures can be adopted for older patients with CCD. PMID:26339428

Finite Element Simulation and Additive Manufacturing of Stiffness-Matched NiTi Fixation Hardware for Mandibular Reconstruction Surgery

PubMed Central

Jahadakbar, Ahmadreza; Shayesteh Moghaddam, Narges; Amerinatanzi, Amirhesam; Dean, David; Karaca, Haluk E.; Elahinia, Mohammad

2016-01-01

Process parameters and post-processing heat treatment techniques have been developed to produce both shape memory and superelastic NiTi using Additive Manufacturing. By introducing engineered porosity, the stiffness of NiTi can be tuned to the level closely matching cortical bone. Using additively manufactured porous superelastic NiTi, we have proposed the use of patient-specific, stiffness-matched fixation hardware, for mandible skeletal reconstructive surgery. Currently, Ti-6Al-4V is the most commonly used material for skeletal fixation devices. Although this material offers more than sufficient strength for immobilization during the bone healing process, the high stiffness of Ti-6Al-4V implants can cause stress shielding. In this paper, we present a study of mandibular reconstruction that uses a dry cadaver mandible to validate our geometric and biomechanical design and fabrication (i.e., 3D printing) of NiTi skeletal fixation hardware. Based on the reference-dried mandible, we have developed a Finite Element model to evaluate the performance of the proposed fixation. Our results show a closer-to-normal stress distribution and an enhanced contact pressure at the bone graft interface than would be in the case with Ti-6Al-4V off-the-shelf fixation hardware. The porous fixation plates used in this study were fabricated by selective laser melting. PMID:28952598

Postnatal width changes in the internal structures of the human mandible: a longitudinal three-dimensional cephalometric study using implants.

PubMed

Baumrind, S; Korn, E L

1992-12-01

This paper presents case-specific quantitative evidence of the systematic lateral displacement of metallic implants in the mandibles of treated and untreated human subjects between the ages of 8.5 and 15.5 years. This evidence appears to be consistent with the inference of small, but systematic increases in distance between the internal structures of the two sides of the osseous mandible during growth. Such a conclusion, however, is inconsistent with traditional beliefs that the internal structures of the mandibular symphysis fuse at the midline during the first post-natal year and remain dimensionally constant thereafter. We recently published evidence of statistically significant transverse displacement of metallic implants in the mandibular body region for 12 of 28 subjects for whom longitudinal data were available. Of the twelve subjects for whom statistically significant changes were observed, widening occurred in eleven cases and narrowing in one. Matching data are now available on concurrent ramus changes for 22 of the same 28 subjects, including 11 of the 12 for whom statistically significant width changes had previously been noted in the body region. In eight of these 11 subjects, statistically significant widening in the ramus region was also observed. No subject had statistically significant widening in the ramus region without also having statistically significant widening in the body region. No subject had statistically significant trans-ramus narrowing.

Morphometric evaluation of condylar cartilage of growing rats in response to mandibular retractive forces.

PubMed

de Sá, Milena Peixoto Nogueira; Zanoni, Jacqueline Nelisis; de Salles, Carlos Luiz Fernandes; de Souza, Fabrício Dias; Suga, Uhana Seifert Guimarães; Terada, Raquel Sano Suga

2013-01-01

The mandibular condylar surface is made up of four layers, i.e., an external layer composed of dense connective tissue, followed by a layer of undifferentiated cells, hyaline cartilage and bone. Few studies have demonstrated the behavior of the condylar cartilage when the mandible is positioned posteriorly, as in treatments for correcting functional Class III malocclusion. The aim of this study was to assess the morphologic and histological aspects of rat condyles in response to posterior positioning of the mandible. Thirty five-week-old male Wistar rats were selected and randomly divided into two groups: A control group (C) and an experimental group (E) which received devices for inducing mandibular retrusion. The animals were euthanized at time intervals of 7, 21 and 30 days after the experiment had began. For histological analysis, total condylar thickness was measured, including the proliferative, hyaline and hypertrophic layers, as well as each layer separately, totaling 30 measurements for each parameter of each animal. The greatest difference in cartilage thickness was observed in 21 days, although different levels were observed in the other periods. Group E showed an increase of 39.46% in the total layer, reflected by increases in the thickness of the hypertrophic (42.24%), hyaline (46.92%) and proliferative (17.70%) layers. Posteriorly repositioning the mandible produced a series of histological and morphological responses in the condyle, suggesting condylar and mandibular adaptation in rats.

Finite Element Simulation and Additive Manufacturing of Stiffness-Matched NiTi Fixation Hardware for Mandibular Reconstruction Surgery.

PubMed

Jahadakbar, Ahmadreza; Shayesteh Moghaddam, Narges; Amerinatanzi, Amirhesam; Dean, David; Karaca, Haluk E; Elahinia, Mohammad

2016-12-19

Process parameters and post-processing heat treatment techniques have been developed to produce both shape memory and superelastic NiTi using Additive Manufacturing. By introducing engineered porosity, the stiffness of NiTi can be tuned to the level closely matching cortical bone. Using additively manufactured porous superelastic NiTi, we have proposed the use of patient-specific, stiffness-matched fixation hardware, for mandible skeletal reconstructive surgery. Currently, Ti-6Al-4V is the most commonly used material for skeletal fixation devices. Although this material offers more than sufficient strength for immobilization during the bone healing process, the high stiffness of Ti-6Al-4V implants can cause stress shielding. In this paper, we present a study of mandibular reconstruction that uses a dry cadaver mandible to validate our geometric and biomechanical design and fabrication (i.e., 3D printing) of NiTi skeletal fixation hardware. Based on the reference-dried mandible, we have developed a Finite Element model to evaluate the performance of the proposed fixation. Our results show a closer-to-normal stress distribution and an enhanced contact pressure at the bone graft interface than would be in the case with Ti-6Al-4V off-the-shelf fixation hardware. The porous fixation plates used in this study were fabricated by selective laser melting.

Possible Interbreeding in Late Italian Neanderthals? New Data from the Mezzena Jaw (Monti Lessini, Verona, Italy)

PubMed Central

Condemi, Silvana; Mounier, Aurélien; Giunti, Paolo; Lari, Martina; Caramelli, David; Longo, Laura

2013-01-01

In this article we examine the mandible of Riparo Mezzena a Middle Paleolithic rockshelter in the Monti Lessini (NE Italy, Verona) found in 1957 in association with Charentian Mousterian lithic assemblages. Mitochondrial DNA analysis performed on this jaw and on other cranial fragments found at the same stratigraphic level has led to the identification of the only genetically typed Neanderthal of the Italian peninsula and has confirmed through direct dating that it belongs to a late Neanderthal. Our aim here is to re-evaluate the taxonomic affinities of the Mezzena mandible in a wide comparative framework using both comparative morphology and geometric morphometrics. The comparative sample includes mid-Pleistocene fossils, Neanderthals and anatomically modern humans. This study of the Mezzena jaw shows that the chin region is similar to that of other late Neanderthals which display a much more modern morphology with an incipient mental trigone (e.g. Spy 1, La Ferrassie, Saint-Césaire). In our view, this change in morphology among late Neanderthals supports the hypothesis of anatomical change of late Neanderthals and the hypothesis of a certain degree of interbreeding with AMHs that, as the dating shows, was already present in the European territory. Our observations on the chin of the Mezzena mandible lead us to support a non abrupt phylogenetic transition for this period in Europe. PMID:23544098

Intraosseous Vascular Access through the Anterior Mandible – A Cadaver Model Pilot Study

PubMed Central

Goldschalt, Christin; Doll, Sara; Ihle, Brit; Kirsch, Joachim; Mutzbauer, Till Sebastian

2014-01-01

Background Several insertion sites have been described for intraosseous puncture in cases of emergencies when a conventional vascular access cannot be established. This pilot study has been designed to evaluate the feasibility of the mandibular bone for the use of an intraosseous vascular access in a cadaver model. Methodology/Principal Findings 17 dentistry and 16 medical students participating in a voluntary course received a short introduction into the method and subsequently used the battery powered EZ-IO system with a 15 mm cannula for a puncture of the anterior mandible in 33 cadavers. The time needed to perform each procedure was evaluated. India ink was injected into the accesses and during the anatomy course cadavers were dissected to retrace the success or failure of the puncture. Dental students needed 25.5±18.9(mean±standard deviation)s and medical students 33±20.4 s for the procedure (p = 0.18). Floor of mouth extravasation occurred in both groups in 3 cases. Success rates were 82 and 75% (p = 0.93). Conclusions/Significance Despite floor of mouth extravasation of injected fluid into a mandibular intraosseous access might severely complicate this procedure, the anterior mandible may be helpful as an alternative to other intraosseous and intravenous insertion sites when these are not available in medical emergencies. PMID:25405476

New method for analysis of facial growth in a pediatric reconstructed mandible.

PubMed

Kau, Chung How; Kamel, Sherif Galal; Wilson, Jim; Wong, Mark E

2011-04-01

The aim of this article was to present a new method of analysis for the assessment of facial growth and morphology after surgical resection of the mandible in a growing patient. This was a 2-year longitudinal study of facial growth in a child who had undergone segmental resection of the mandible with immediate reconstruction as a treatment for juvenile aggressive fibromatosis. Three-dimensional digital stereo-photogrammteric cameras were used for image acquisition at several follow-up intervals: immediate, 6 months, and 2 years postresection. After processing and superimposition, shell-to-shell deviation maps were used for the analysis of the facial growth pattern and its deviation from normal growth. The changes were seen as mean surface changes and color maps. An average constructed female face from a previous study was used as a reference for a normal growth pattern. The patient showed significant growth during this period. Positive changes took place around the nose, lateral brow area, and lower lip and chin, whereas negative changes were evident at the lower lips and cheeks area. An increase in the vertical dimension of the face at the chin region was also seen prominently. Three-dimensional digital stereo-photogrammetry can be used as an objective, noninvasive method for quantifying and monitoring facial growth and its abnormalities. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Management of comminuted but continuous mandible defects after gunshot injuries.

PubMed

Rana, Majeed; Warraich, Riaz; Rashad, Ashkan; von See, Constantin; Channar, Kashif A; Rana, Madiha; Stoetzer, Marcus; Gellrich, Nils-Claudius

2014-01-01

Firearm injuries continue as a major public health problem, contributing significant morbidity, mortality, and expense to our society. There are four main steps in the management of patients with gunshot wounds to the face: securing an airway, controlling haemorrhage, identifying other injuries and definitive repair of the traumatic facial deformities. The objective of this study was to determine late outcome of two treatment options by open reduction and internal fixation versus closed reduction and maxillomandibular fixation (MMF) in the treatment of gunshot injuries of the mandible. Sixty patients of gunshot injury were randomly allocated in two groups. In group A, 30 patients were treated by open reduction and internal fixation and in group B, 30 patients were treated by closed reduction and maxillomandibular fixation. Patients were discharged as the treatment completed and recalled for follow up. Up to 3 months after injury, fortnightly complications like infection, malocclusion, malunion of fractured fragments, facial asymmetry, sequestration of bone and exposed plates were evaluated and the differences between two groups were assessed. The follow-up period ranged from 3 months to 10 months. Patients treated by open reduction tended to have less complications as compared to closed reduction. Based on this study open reduction and internal fixation is the best available method for the treatment of gunshot mandible fractures without continuity defect. Copyright © 2012 Elsevier Ltd. All rights reserved.

Changes in mandibular dimensions during the mediaeval to post-mediaeval transition in London: a possible response to decreased masticatory load.

PubMed

Rando, Carolyn; Hillson, Simon; Antoine, Daniel

2014-01-01

Biomechanical forces, such as those produced during mastication, are considered a primary agent in stimulating craniofacial growth and development. There appears to be a strong connection between the strength of the masticatory muscles and the dimensions of the craniofacial complex, with changes in biomechanical force and muscular strength influencing and altering the underlying bony tissues. This is markedly apparent in the mandible and it is possible to infer that changes to mandibular form are due in part to dietary changes. This study aims to investigate this idea by using an archaeological sample from a period that experienced important dietary changes as a result of the Industrial Revolution. 279 skeletons from the mediaeval and post-mediaeval periods in London were selected for analysis, and a detailed metric examination of each mandible was carried out. Males and females were analysed separately and statistically significant reductions were observed in nearly all post-mediaeval measurements. This effect was most pronounced in the areas of the mandible associated with masticatory muscles attachment, including the gonial angle, ramus height and width, bi-gonial breadth and bi-condylar breadth. These recorded changes in mandibular morphology of mediaeval and post-mediaeval Londoners are most likely the result of a shift in diet (and associated decrease in masticatory function) observed in the period surrounding the Industrial Revolution. Copyright © 2013 Elsevier Ltd. All rights reserved.

Comparison between complete denture and implant-retained overdenture: effect of different mucosa thickness and resiliency on stress distribution.

PubMed

Assunção, Wirley Gonçalves; Barão, Valentim Adelino Ricardo; Tabata, Lucas Fernando; de Sousa, Edson Antonio Capello; Gomes, Erica Alves; Delben, Juliana Aparecida

2009-12-01

The effect of different mucosa characteristics on stress distribution of complete dentures and overdentures remains unknown. The aim of this study was to evaluate the effect of different mucosa thickness and resiliency on the stress distribution of complete dentures and implant-retained overdentures using a two-dimensional finite element analysis. Representative models of the edentulous mandible were constructed on AutoCAD software according to the groups' characteristics. In group CD, a model of the edentulous mandible supporting a complete denture was obtained while in group IO, a model of edentulous mandible supporting an overdenture over two unsplinted implants with an o' ring system was constructed. In each group, mucosa assumed three characteristics of thickness (1, 3 and 5 mm) corresponding to the resiliencies hard, resilient and soft respectively. Evaluation was performed on Ansys software with 100N vertical load applied on central incisor teeth. The principal stress was used as analysis criteria. Group IO showed higher stress values than group CD regardless of mucosal thickness and resiliency. Stress decreased at the supporting tissues in both groups as the thickness and resiliency of mucosa increased. In relation to the supporting tissues, cortical bone showed the highest stress values. It was concluded that the use of an attachment system increases stress values and the thickness and resiliency of mucosa influence more on these values.

Trauma of facial skeleton in children: An indian perspective.

PubMed

Karim, Tanweer; Khan, Arshad Hafeez; Ahmed, Syed Saeed

2010-06-01

Both children and adults are subject to similar types of injuries but fractures of facial bones in children are relatively uncommon. The aim of this study was to evaluate the epidemiology of facial bone fractures among children of <12 years, their management and outcome in an Indian city. This retrospective study included children of <12 years of age with facial bone fractures admitted over a span of 3 years. In order to compare our results we reviewed the existing literature related to pediatric facial bone fractures. A total of 45 children were admitted for facial bone fractures. Forty (89%) of them were above 5 years of age and male to female ratio was 2:1. About 53.33% of these injuries were because of fall from height. Mandible fracture was the most common facial bone fracture among admitted patients. Symphysis and para-symphysis was the commonest site of mandibular fractures, seen in 49% cases. Majority of these fractures were managed by Inter-maxillary fixation and inter-osseous wiring. Mini-plates were used for widely displaced compound fractures. For un-displaced fractures observation alone was sufficient. Mandible is the commonest facial bone fracture in children, more often caused by accidental fall from height. The high osteogenic potential of pediatric mandible allows non-surgical management to be successful in an increased proportion of younger patients.

Suspended circummandibular wire fixation for mixed-dentition pediatric mandible fractures.

PubMed

Nishioka, G J; Larrabee, W F; Murakami, C S; Renner, G J

1997-07-01

To introduce and evaluate the technique of cirummandibular wires with piriform rim suspension (CMW-PRS) combined with arch bars and a fracture site bridle in the treatment of mixed-dentition pediatric mandible fractures. Five male patients (mean age, 8.2 years [age range, 7-10 years]) with an isolated mixed-dentition mandible fracture were treated with the CMW-PRS technique at the University of Texas Health Science Center, San Antonio, from 1985 to 1987 and at the University of Missouri, Columbia, from 1992 to 1995. Clinical and radiographic fracture healing, somatosensory status, and complications were evaluated. All patients demonstrated clinical union to their preinjury occlusion by 3 or 4 weeks. They remained without complications until they were no longer available for follow-up. Panoramic radiographs supported the findings of clinical examinations throughout the study, and no radiographic abnormalities were found. There were no somatosensory disturbances of the lingual or mental/inferior alveolar nerves. One patient required a tracheostomy unrelated to the procedure. The CMW-PRS technique combined with arch bars and a fracture site bridle wire achieved equivalent historical results when compared with the dental splint. The potential advantages and disadvantages of the CMW-PRS technique compared with those of monocortical bone plating, as well as the significant advantages of the CMW-PRS over the dental splint, are discussed in the text.

Assessment of the correlation between insertion torque and resonance frequency analysis of implants placed in bone tissue of different densities.

PubMed

Filho, Luiz Carlos Magno; Cirano, Fabiano Ribeiro; Hayashi, Fernando; Feng, Hsu Shao; Conte, Alexandre; Dib, Luciano Lauria; Casati, Marcio Zaffalon

2014-06-01

The primary stability of dental implants is fundamental for osseointegration. Therefore, this study aimed to assess the correlation between insertion torque (IT) and resonance frequency analysis (RFA) of implants placed in mandibles and maxillas of different bone densities. Eighty dental implants were placed in maxillas and mandibles, and IT and the implant stability quotient (ISQ) were measured at the time of implant insertion. Bone density was assessed subjectively by the Lekholm and Zarb index. The type I and II densities were grouped together (group A)as were the type III and IV densities (group B). The IT in group A was higher (Student t test, P = .0013) than in group B (46.27 ± 18.51 Ncm, 33.62 ± 14.74 Ncm, respectively). The implants placed in group A showed higher ISQ (Student t test, P = .0004) than those placed in group B (70.09 ± 7.50, 63.66 ± 8.00, respectively). A significant correlation between IT and the ISQ value was observed for group A (Pearson correlation test; r = 0.35; P = .0213) and for group B (r = 0.37; P = .0224). Within the limitations of this study, it was possible to conclude that there is a correlation between IT and RFA of implants placed in mandibles and maxillas of different bone densities.

Finite Element Analysis of the Cingulata Jaw: An Ecomorphological Approach to Armadillo’s Diets

PubMed Central

Serrano-Fochs, Sílvia; De Esteban-Trivigno, Soledad; Marcé-Nogué, Jordi; Fortuny, Josep; Fariña, Richard A.

2015-01-01

Finite element analyses (FEA) were applied to assess the lower jaw biomechanics of cingulate xenarthrans: 14 species of armadillos as well as one Pleistocene pampathere (11 extant taxa and the extinct forms Vassallia, Eutatus and Macroeuphractus). The principal goal of this work is to comparatively assess the biomechanical capabilities of the mandible based on FEA and to relate the obtained stress patterns with diet preferences and variability, in extant and extinct species through an ecomorphology approach. The results of FEA showed that omnivorous species have stronger mandibles than insectivorous species. Moreover, this latter group of species showed high variability, including some similar biomechanical features of the insectivorous Tolypeutes matacus and Chlamyphorus truncatus to those of omnivorous species, in agreement with reported diets that include items other than insects. It remains unclear the reasons behind the stronger than expected lower jaw of Dasypus kappleri. On the other hand, the very strong mandible of the fossil taxon Vassallia maxima agrees well with the proposed herbivorous diet. Moreover, Eutatus seguini yielded a stress pattern similar to Vassalia in the posterior part of the lower jaw, but resembling that of the stoutly built Macroeuphractus outesi in the anterior part. The results highlight the need for more detailed studies on the natural history of extant armadillos. FEA proved a powerful tool for biomechanical studies in a comparative framework. PMID:25919313

Radiation dose response simulation for biomechanical-based deformable image registration of head and neck cancer treatment

NASA Astrophysics Data System (ADS)

Al-Mayah, Adil; Moseley, Joanne; Hunter, Shannon; Brock, Kristy

2015-11-01

Biomechanical-based deformable image registration is conducted on the head and neck region. Patient specific 3D finite element models consisting of parotid glands (PG), submandibular glands (SG), tumor, vertebrae (VB), mandible, and external body are used to register pre-treatment MRI to post-treatment MR images to model the dose response using image data of five patients. The images are registered using combinations of vertebrae and mandible alignments, and surface projection of the external body as boundary conditions. In addition, the dose response is simulated by applying a new loading technique in the form of a dose-induced shrinkage using the dose-volume relationship. The dose-induced load is applied as dose-induced shrinkage of the tumor and four salivary glands. The Dice Similarity Coefficient (DSC) is calculated for the four salivary glands, and tumor to calculate the volume overlap of the structures after deformable registration. A substantial improvement in the registration is found by including the dose-induced shrinkage. The greatest registration improvement is found in the four glands where the average DSC increases from 0.53, 0.55, 0.32, and 0.37 to 0.68, 0.68, 0.51, and 0.49 in the left PG, right PG, left SG, and right SG, respectively by using bony alignment of vertebrae and mandible (M), body (B) surface projection and dose (D) (VB+M+B+D).

Postecdysis Sclerotization of Mouthparts of the Formosan Subterranean Termites (Isoptera: Rhinotermitidae).

PubMed

Kakkar, Garima; Chouvenc, Thomas; Su, Nan-Yao

2016-04-01

In termites, it is challenging to recognize the incidence of molting in workers because of their successive stationary molt, asynchronous molting among individuals, cryptic behavior, a soft and poorly sclerotized cuticle, and they immediately consume the shed exuvia of nestmates. This study describes a method in which the degree of sclerotization of the mouthparts in newly molted workers of the Formosan subterranean termite can be quantified and used to determine if an individual has recently molted, within a 36-h time frame. Changes in the tanning of mouthparts over time were used as a measure of the index of sclerotization in workers postmolting. Upon ecdysis, the primary point of articulation of the mandible already initiated sclerotization, which may allow the movement of the mandibles during the shedding of the exuvium. The sclerotization of the secondary point of articulation and the mandibular teeth, and the width of sclerotization of the mandibles, progressively increased until reaching a plateau around 36-h postecdysis, which imply that workers can regain some level of activity as early as 2 d after ecdysis. Our observations allowed for the determination of variables for the sclerotization of the mouthparts to easily identify workers that recently molted, and this method will be useful in future studies that focus on the molting activity of workers over time and space within a termite colony, in the scope of improving current control strategies for termite pests.

Risk factors associated with open gingival embrasures after orthodontic treatment.

PubMed

An, Sang Su; Choi, Yoon Jeong; Kim, Ji Young; Chung, Chooryung J; Kim, Kyung-Ho

2018-05-01

To investigate the incidence of and contributing factors to open gingival embrasures between the central incisors after orthodontic treatment. One hundred posttreatment patients (29 men and 71 women; mean age, 24.7 years) were divided retrospectively into occurrence and nonoccurrence groups based on intraoral photographs. Based on the severity, the occurrence group was further divided into mild, moderate, and severe groups. Parameters from periapical radiographs, superimposed lateral cephalograms, and study models were compared between the occurrence and the nonoccurrence groups by using independent t-tests and were also analyzed on the basis of severity via analysis of variance. Logistic regression analysis was performed to identify the contributing factors to open gingival embrasures. The incidence of open gingival embrasures between the central incisors was 22% and 36% in the maxilla and the mandible, respectively. Lingual movement of the incisors, distance from the contact point to the alveolar crest after treatment, antero-posterior overlap of the two central incisors before treatment in the maxilla, and distance from the contact point to the alveolar crest after treatment in the mandible were significantly associated with the occurrence of open gingival embrasures ( P < .05). In the mandible, the amount of intrusion was significantly related to severity ( P < .05). The incidence of open gingival embrasures following orthodontic tooth movement is high. Therefore, attention should be paid to the contributing factors to prevent or reduce the occurrence of open gingival embrasures.

Spline analysis of the mandible in human subjects with class III malocclusion.

PubMed

Singh, G D; McNamara, J A; Lozanoff, S

1997-05-01

This study determines deformations that contribute to a Class III mandibular morphology, employing thin-plate spline (TPS) analysis. A total of 133 lateral cephalographs of prepubertal children of European-American descent with either a Class I molar occlusion or a Class III malocclusion were compared. The cephalographs were traced and checked, and eight homologous landmarks on the mandible were identified and digitized. The datasets were scaled to an equivalent size and subjected to statistical analyses. These tests indicated significant differences between average Class I and Class III mandibular morphologies. When the sample was subdivided into seven age and sex-matched groups statistical differences were maintained for each group. TPS analysis indicated that both affine (uniform) and non-affine transformations contribute towards the total spline, and towards the average mandibular morphology at each age group. For non-affine transformations, partial warp 5 had the highest magnitude, indicating large-scale deformations of the mandibular configuration between articulare and pogonion. In contrast, partial warp 1 indicated localized shape changes in the mandibular symphyseal region. It is concluded that large spatial-scale deformations affect the body of the mandible, in combination with localized distortions further anteriorly. These deformations may represent a developmental elongation of the mandibular corpus antero-posteriorly that, allied with symphyseal changes, leads to the appearance of a Class III prognathic mandibular profile.

Validation of a fibula graft cutting guide for mandibular reconstruction: experiment with rapid prototyping mandible model.

PubMed

Lim, Se-Ho; Kim, Yeon-Ho; Kim, Moon-Key; Nam, Woong; Kang, Sang-Hoon

2016-12-01

We examined whether cutting a fibula graft with a surgical guide template, prepared with computer-aided design/computer-aided manufacturing (CAD/CAM), would improve the precision and accuracy of mandibular reconstruction. Thirty mandibular rapid prototype (RP) models were allocated to experimental (N = 15) and control (N = 15) groups. Thirty identical fibular RP models were assigned randomly, 15 to each group. For reference, we prepared a reconstructed mandibular RP model with a three-dimensional printer, based on surgical simulation. In the experimental group, a stereolithography (STL) surgical guide template, based on simulation, was used for cutting the fibula graft. In the control group, the fibula graft was cut manually, with reference to the reconstructed RP mandible model. The mandibular reconstructions were compared to the surgical simulation, and errors were calculated for both the STL surgical guide and the manual methods. The average differences in three-dimensional, minimum distances between the reconstruction and simulation were 9.87 ± 6.32 mm (mean ± SD) for the STL surgical guide method and 14.76 ± 10.34 mm (mean ± SD) for the manual method. The STL surgical guide method incurred less error than the manual method in mandibular reconstruction. A fibula cutting guide improved the precision of reconstructing the mandible with a fibula graft.

Quantitation of zoledronic acid in murine bone by liquid chromatography coupled with tandem mass spectrometry.

PubMed

Raccor, Brianne S; Sun, Jianxun; Lawrence, Ross F; Li, Lei; Zhang, Hai; Somerman, Martha J; Totah, Rheem A

2013-09-15

An in vitro method for extraction and quantification of zoledronic acid (ZA) from murine bone was developed. Whole mouse bones were incubated in ZA solutions with predetermined concentrations and bound ZA was subsequently extracted from bone with phosphoric acid and derivatized using trimethylsilyl diazomethane (TMS-DAM). ZA tetra-methyl phosphonate was quantified by liquid chromatography coupled with tandem mass spectrometry (LC/MS/MS). This resulted in a sensitive, accurate, and precise method that was linear over three orders of magnitude (0.0250-50.0μg/mL ZA). For quality control (QC) samples, intra-and inter-day coefficients of variance were calculated and were less than 10%. This method was then applied to an in vivo model to quantitate ZA from the femur and mandible of three mice treated with ZA for two weeks. The mean ZA extracted from the mandible was four fold higher than that extracted from the femur (3.06±0.52 vs. 0.76±0.09ng/mg, respectively) indicating that ZA did not distribute equally in the skeleton and had a preference to the mandible. In conclusion, a highly sensitive method to measure ZA from mouse skeleton was developed, which can be easily adapted to multiple mammalian models including humans receiving ZA treatment. Copyright © 2013 Elsevier B.V. All rights reserved.

Relevance of anterior mandibular body ostectomy in mandibular prognathism.

PubMed

Bansal, Pankaj; Singh, Virender; Anand, S C; Bansal, Sumidha

2013-01-01

We tried to find out the relevance of anterior mandibular body ostectomy in deformities of the mandible specially prognathism, which is primarily limited to anterior part only. Ten patients with skeletal deformity along with malocclusion, which was limited to anterior body of mandible were selected. Selected patients had proper molar interdigitation (even if class 3) and in general had anterior crossbite (except one). All patients had crossed their growth spurts and had no hormonal influence on facial deformity. Specific protocol, including cephelometric analysis cephalometry for orthognathic surgery, prediction tracing and model surgeries were devised. Pre and post-surgical orthodontics and body ostectomy were performed in all patients along with 18-month post-op follow-up. There was significant reduction in prognathism and horizontal dysplasia in all ten patients. Anterior crossbite as well as axis of incisiors over mandibular plane was corrected in all patients due to decrease in length of mandibular body. All patients showed decreased facial height and better lip competence with intact posterior occlusion and no (negligible or transient) sensory loss. Our study could confirm that people whose deformity is limited to the anterior part of mandible with reasonable occlusion posteriorly can get satisfactory cosmetic and functional results through body ostectomy alone rather than going for surgical procedure in the ramal area, which is liable to cause sensory and occlusal disturbances.

Dietary correlates associated with the mental foramen in primates: implications for interpreting the fossil record.

PubMed

Muchlinski, Magdalena N; Deane, Andrew S

2016-07-01

The mandibular nerve is a sensory and motor nerve that innervates the muscles of mastication, the lower dentition, and the lower lip and surrounding structures. Although this nerve contains both efferent and afferent fibers, the mental nerve, a terminal branch of the mandibular nerve, is a strictly sensory nerve that exits the mental foramen and innervates the lower lip, the skin overlaying the mandible, and the oral mucosa around the mandible. Osteological foramina are often used as proxies for nerve cross section area and they often correlate well with some aspect of a primate's ecology (e.g., optic foramen and visual acuity). The primary objective of this study is to explore the correlation between the mental foramen and dietary preference among primates. The mental foramen of 40 primate species (n = 180) was measured from 3-D surface models of the mandible. Both conventional and phylogenetic tests indicate that although frugivores have larger mental foramina than folivores, the differences were not significant. These results show that while structures like the infraorbital foramen correlate well with diet and touch sensitivity, the mental foramen does not. Based on these findings, the mental foramen is not a suggested morphological character for interpreting of the fossil record. J. Morphol. 277:978-985, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Mandibular reconstruction with the vascularized fibula flap: comparison of virtual planning surgery and conventional surgery.

PubMed

Wang, Y Y; Zhang, H Q; Fan, S; Zhang, D M; Huang, Z Q; Chen, W L; Ye, J T; Li, J S

2016-11-01

This study evaluated the accuracy of mandibular reconstruction and assessed clinical outcomes in both virtual planning and conventional surgery patients. ProPlan CMF surgical planning software was used preoperatively in the virtual planning group. In the virtual planning group, fibula flaps were harvested and osteotomized, and the mandibles were resected and reconstructed assisted by the prefabricated cutting guides and templates. The main outcome measures included the operative time, postoperative computed tomography (CT) scans, facial appearance, and occlusal function. The ischemia time and total operation time were shorter in the virtual planning group than in the conventional surgery group. High precision with the use of the cutting guides and templates was found for both the fibula and mandible, and a good fit was noted among the pre-bent plate, mandible, and fibula segments in the virtual planning group. Postoperative CT scans also showed excellent mandibular contours of the fibula flaps in accordance with virtual plans in the virtual planning group. This study demonstrated that virtual surgical planning was able to achieve more accurate mandibular reconstruction than conventional surgery. The use of prefabricated cutting guides and plates makes fibula flap moulding and placement easier, minimizes the operating time, and improves clinical outcomes. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Bilateral radicular cyst in mandible: an unusual case report.

PubMed

Bava, Fareed Ahmed; Umar, Dilshad; Bahseer, Bahija; Baroudi, Kusai

2015-02-01

A radicular cyst is one of the furthermost everyday odontogenic cysts of the anterior maxilla, not regularly comprehended in youth. They are found mostly at the apices of the tooth (periapical cyst), lateral surface of the roots (lateral radicular cyst) and remains in the jaw after removal of the offending tooth (residual cyst). The radicular cyst has been catalogued as an inflammatory cyst, as an outcome to pulpal necrosis succeeding caries, with a linked periapical inflammatory reaction. They advance sluggishly and asymptomatic lest infected. Because of this they can extent to big dimensions. Many times it is perplexing to segregate radicular cysts from the obligatory pre-existing chronic periapical periodontitis lesions radiographically. Here, we present a rare case with bilateral radicular cyst in relation to first molar of the mandible in a 19-year-old. Orthopantomograph showed a large unilocular radiolucency with a well-defined border in the periapical region of the first molar on the left side extending from the root of the second premolar to the mesial root of the second molar. Correspondingly another well-defined unilocular radiolucency with a well-defined border was seen on the right side of the mandible. Several treatment possibilities are presented for a radicular cyst such as surgical endodontic treatment, extraction of the transgressing tooth, enucleation with primary closure, and marsupialization trailed by enucleation. The patient management comprised surgical enucleation of cystic sac followed by rehabilitation of the same area.

Analyzing the sclerocarpy adaptations of the Pitheciidae mandible.

PubMed

Püschel, Thomas A; Marcé-Nogué, Jordi; Kaiser, Thomas M; Brocklehurst, Robert J; Sellers, William I

2018-04-17

Primates are interpreted to be ancestrally adapted to frugivory, although some modern groups show clear adaptations to other diets. Among them, pitheciids stand out for specifically predating seeds. This dietary specialization is known as sclerocarpy and refers to the extraction of seeds from surrounding hard tissues using the anterior dentition followed by the mastication of seeds by the molars. It has been proposed that Callicebus-Pithecia-Chiropotes-Cacajao represent a morphocline of increasingly specialized anatomical traits for sclerocarpic foraging. This study addresses whether there is a sclerocarpic specialization gradient in the mandibular morphology of pitheciids. Finite element analysis (FEA) was used to simulate two biting scenarios and the obtained stress values were compared between different pitheciids. Geometric morphometrics (GM) were used to display the morphological variation of this group. No support was found for the morphocline hypothesis from a biomechanical viewpoint since all pitheciins showed similar stress values and on average Chiropotes rather than Cacajao exhibited the strongest mandible. From a morphological perspective, it was found that there is indeed relative "robusticity" continuum in the pitheciid mandible for some aspects of shape as expected for the morphocline hypothesis, but this gradient could be related to other factors rather than sclerocarpic specialization. The present results are expected to contribute to a better insight regarding the ecomorphological relationship between mandibular morphology and mechanical performance among pitheciids. © 2018 Wiley Periodicals, Inc.

"Closed Reduction" Principles Can Manage Diverse Conditions of Temporomandibular Joint Vertical Height Loss: From Displaced Condylar Fractures to Idiopathic Condylar Resorption.

PubMed

Nitzan, Dorrit W; Palla, Sandro

2017-06-01

The aim of this case series was to describe a modification of the classic "closed reduction" technique to manage unilateral or anterior open bite owing to a loss in vertical height (LVH) caused by several disorders and pathologies other than displaced condylar fractures. The protocol included insertion of an occlusal appliance to increase the height of the premature contact and the width of the open bite, stabilization of the dental arches by rigid arches, and the use, during sleep, of rubber bands in the open bite region to pull the mandible cranially. In addition, when awake, the patient performed physiotherapy exercises to guide the mandible into maximum intercuspation. The increased open bite enhanced the effect of the rubber bands in guiding the mandible into the original habitual occlusion and the rigid arches served to minimize tooth eruption. The present cases showed the favorable outcome of this low-risk treatment in the re-establishment of the original habitual occlusion within 1 to 4 weeks and without reconstruction of the LVH. The efficacy of this complication-free approach to correct occlusion in various conditions of LVH suggests that this protocol should be applied before venturing into surgical intervention. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Giant cell lesions with a Noonan-like phenotype: a case report.

PubMed

Cancino, Claudia Marcela H; Gaião, Léonilson; Sant'Ana Filho, Manoel; Oliveira, Flavio Augusto Marsiaj

2007-05-01

The purpose of this article is to describe a case of multiple giant cell lesions of the mandible that occurred in a 14-year-old girl with phenotypic characteristics associated with Noonan Syndrome (NS). NS is a dysmorphic disorder characterized by hypertelorism, short stature, congenital heart defects, short and webbed neck, skeletal anomalies, and bleeding diathesis. A 14-year-old girl with a previous diagnosis of NS (sporadic case) presented with multiple radiolucent lesions in the body and ramus of her mandible. In terms of clinical behavior and the described radiographic characteristics, giant cells lesions with Noonan-like phenotype can be considered a form of cherubism. Therefore, surgical intervention is not necessary, but radiographic follow-up and observation is very important during the control and gradual regression of the lesions.

Phosphaturic mesenchymal tumor, mixed connective tissue variant, of the mandible: report of a case and review of the literature.

PubMed

Woo, Victoria L; Landesberg, Regina; Imel, Erik A; Singer, Steven R; Folpe, Andrew L; Econs, Michael J; Kim, Taeyun; Harik, Lara R; Jacobs, Thomas P

2009-12-01

Tumor-induced osteomalacia (TIO) is a rare paraneoplastic syndrome that results in renal phosphate wasting with hypophosphatemia. In most cases, the underlying cause of TIO is a small mesenchymal neoplasm that is often difficult to detect, resulting in delayed diagnosis. One such neoplasm is the phosphaturic mesenchymal tumor, mixed connective tissue variant (PMTMCT), an unusual entity with unique morphologic and biochemical features. Most of these tumors are found at appendicular sites with only rare cases reported in the jaws. We describe a PMTMCT involving the mandible in a patient with a protracted history of osteomalacia. A review of the current literature is provided with emphasis on the clinical and histologic features, etiopathogenesis, and management of PMTMCT in the setting of TIO.

Phosphaturic mesenchymal tumor, mixed connective tissue variant, of the mandible: Report of a case and review of the literature

PubMed Central

Woo, Victoria L.; Landesberg, Regina; Imel, Erik A.; Singer, Steven R.; Folpe, Andrew L.; Econs, Michael J.; Kim, Taeyun; Harik, Lara R.; Jacobs, Thomas P.

2009-01-01

Tumor-induced osteomalacia (TIO) is a rare paraneoplastic syndrome that results in renal phosphate wasting with hypophosphatemia. In most cases, the underlying cause of TIO is a small mesenchymal neoplasm that is often difficult to detect, resulting in delayed diagnosis. One such neoplasm is the phosphaturic mesenchymal tumor, mixed connective tissue variant (PMTMCT), an unusual entity with unique morphologic and biochemical features. The majority of these tumors are found at appendicular sites with only rare cases reported in the jaws. We describe a PMTMCT involving the mandible in a patient with a protracted history of osteomalacia. A review of the current literature is provided with emphasis on the clinical and histologic features, etiopathogenesis, and management of PMTMCT in the setting of TIO. PMID:19828339

Comminuted mandibular fracture in child victim of dog bite.

PubMed

de Carvalho, Matheus Furtado; Hardtke, Luiz Augusto Paixão; de Souza, Max Filipe Cota; de Oliveira Araujo, Vasco

2012-08-01

Dog bites represent lesions commonly found in Hospital Emergency Clinic. This type of lesion may cause severe harm to patients, but it rarely affects the underlying bone structure causes facial fracture. This study aims to illustrate a rare clinical case in which a pediatric patient presented a comminuted fracture in the mandible which evolved into a unilateral avulsion of the mandibular condyle, body fractures as well as a mandibular ramus and hemiface that had been deformed, with multiple lacerations and loss of soft-tissue mass. Intermaxillary fixation was performed using the Ivy method, followed by internal rigid fixation using miniplates and screws in attempt to reconstruct the child's mandible. After 2 years of follow-up, a satisfactory esthetics and functional results could be observed. © 2011 John Wiley & Sons A/S.

A Technique for Reduction of Edentulous Fractures Using Dentures and SMARTLock Hybrid Fixation System

PubMed Central

Carlson, Anna Rose; Shammas, Ronnie Labib; Allori, Alexander Christopher

2017-01-01

Summary: Establishing anatomic reduction of an edentulous mandible fracture is a frequently acknowledged challenge in craniomaxillofacial trauma surgery. In this study, we report a novel method for the reduction of the edentulous mandible fracture, via fabrication of modified Gunning splints using existing dentures and SMARTLock hybrid arch bars. This technique dramatically simplifies the application of an arch bar to dentures, obviates the need for the fabrication of impressions and custom splints, and eliminates the lag time associated with the creation of splints. Furthermore, this method may be used with or without adjunctive rigid internal fixation. The technique described herein of creating Gunning splints with SMARTLock hybrid arch bars provides surgeons with a simple, rapid, single-stage solution for reduction of mandibular fractures in the edentulous patient. PMID:29062645

[Ewing sarcoma located in the mandible: A case report].

PubMed

Hernandez, M; Droz, D; Mansuy, L; Simon, E; Chastagner, P

2015-06-01

Ewing sarcoma is the second most common primary malignant bone cancer in children and adolescents. Clinical presentation is usually dominated by local pain and a palpable mass. These symptoms justify imaging investigations: the first one, when an osseous lesion is suspected, is usually a conventional radiograph in two planes. Ewing sarcoma appears as a poorly defined osteolytic lesion that may frequently be associated with cortical erosion or laminar periosteal response ("onion skin"). However, this aspect is not pathognomonic and the definitive diagnosis is made by biopsy. Absence of pain or an unusual localization can lead to misdiagnosis. We report the case of a 7-year-old boy with Ewing sarcoma located in the mandible with a clinical picture including progressive mandibular swelling but no pain. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Conservative treatment of intraosseous hemangiomas in the mandible: case report with a 17-year follow-up period.

PubMed

Frizzera, Fausto; Beccalli, Ivette; Maia, Rosa Maria Lourenço Carlos; Tonetto, Mateus Rodrigues; Zanetti, Liliane Scheidegger da Silva; de Barros, Liliana Pimenta Aparecida

2014-05-01

Intraosseous hemangiomas in the jaws are rare lesions and may lead to several complications. The authors present a case of a 12-year-old girl with a radiolucent periapical lesion between tooth 35 and 36 where nocturnal exsanguinating bleeding started to occur from periodontal sulcus during orthodontic treatment. Diagnosis of an intraosseous hemangioma in the mandible was based on positive needle aspiration for blood, computed tomography and arteriography. At first the family chose to only follow-up the lesion but episodes of nocturnal hemorrhage were becoming more frequent and a treatment was requested. Embolization and dental extraction were performed in order to treat the lesion. After a follow-up period of 17 years no more cases of hemorrhage occurred and lesion regressed.

Biomechanical evaluation of the natural abutment teeth in combined tooth-implant-supported telescopic prostheses: a three-dimensional finite element analysis.

PubMed

Chen, Yu; Wang, Chao; Huang, Yuanding; Feng, Tianming; Zou, Huawei; Fan, Yubo

2017-07-01

Telescopic overdentures supported by the combination of natural teeth and implants have been thought a valuable treatment for the severely compromised partially edentulous patients. But the combination of teeth and implants involves highly complex biomechanical problems. This study is to evaluate biomechanical behaviors of the natural abutment teeth with the treatment of combined tooth-implant supported telescopic crown prostheses in mandible through 3D FEA. According to this study, the prosthetic option supported by a combination of teeth and implants and retained by double crowns could protect teeth and their periodontal support tissues acting as a rigid splint, and may be a valuable treatment option for partially edentulous patients with severely reduced remaining teeth in mandible.

Piezoelectric-assisted removal of a benign fibrous histiocytoma of the mandible: An innovative technique for prevention of dentoalveolar nerve injury

PubMed Central

2011-01-01

In this article, we present our experience with a piezoelectric-assisted surgical device by resection of a benign fibrous histiocytoma of the mandible. A 41 year-old male was admitted to our hospital because of slowly progressive right buccal swelling. After further radiographic diagnosis surgical removal of the yellowish-white mass was performed. Histologic analysis showed proliferating histiocytic cells with foamy, granular cytoplasm and no signs of malignancy. The tumor was positive for CD68 and vimentin in immunohistochemical staining. Therefore the tumor was diagnosed as primary benign fibrous histiocytoma. This work provides a new treatment device for benign mandibular tumour disease. By using a novel piezoelectric-assisted cutting device, protection of the dentoalveolar nerve could be achieved. PMID:22040611

The removal of a malpositioned implant in the anterior mandible using piezosurgery.

PubMed

Marini, Ettore; Cisterna, Veronica; Messina, Antonello Maria

2013-05-01

In oral, cranio, and maxillofacial surgery, a close relationship among the bone, nerves, and blood vessels can be regularly observed. Surgical procedures for the removal of dental implants have the potential to cause vascular injury and bleeding in the floor of the mouth and internal anterior region of the mandible. Furthermore, conventional osteotomy techniques always require extensive protection of adjacent soft tissue because cutting is not limited to bone and could easily affect other tissues when applied improperly. We report the removal by means of piezosurgery of a malpositioned osseointegrated implant that had previously caused a sublingual hematoma during its insertion. The postoperative course was uneventful, no bleeding, infection, or hematoma formation was noted and the patient reported 100% resolution of all symptoms. Copyright © 2013 Elsevier Inc. All rights reserved.

Ultrasonic implant site preparation using piezosurgery: a multicenter case series study analyzing 3,579 implants with a 1- to 3-year follow-up.

PubMed

Vercellotti, Tomaso; Stacchi, Claudio; Russo, Crescenzo; Rebaudi, Alberto; Vincenzi, Giampaolo; Pratella, Umberto; Baldi, Domenico; Mozzati, Marco; Monagheddu, Chiara; Sentineri, Rosario; Cuneo, Tommaso; Di Alberti, Luca; Carossa, Stefano; Schierano, Gianmario

2014-01-01

This multicenter case series introduces an innovative ultrasonic implant site preparation (UISP) technique as an alternative to the use of traditional rotary instruments. A total of 3,579 implants were inserted in 1,885 subjects, and the sites were prepared using a specific ultrasonic device with a 1- to 3-year follow-up. No surgical complications related to the UISP protocol were reported for any of the implant sites. Seventy-eight implants (59 maxillary, 19 mandibular) failed within 5 months of insertion, for an overall osseointegration percentage of 97.82% (97.14% maxilla, 98.75% mandible). Three maxillary implants failed after 3 years of loading, with an overall implant survival rate of 97.74% (96.99% maxilla, 98.75% mandible).

Chronic Suppurative Osteomyelitis of Subcondylar Region: A Case Report

PubMed Central

Syed, Basheer Ahmed; Prasad, N; Praveen, SP

2013-01-01

ABSTRACT Chronic suppurative osteomyelitis (CSO) of the maxillofacial region is primarily caused by infections of odontogenic microorganisms. It may also arise as a complication of dental extractions, maxillofacial trauma, inadequate treatment of a fracture and irradiation to the mandible. This condition is characterized by areas of devitalized bone (sequestra) which serves as a nidus for recurrent episodes of infection. This case report describes a case of CSO in an untreated right subcondylar fracture of the mandible which was successfully treated with a combination of antibiotic therapy and surgical debridement in an 8-year-old boy. How to cite this article: Kumar GR, Syed BA, Prasad N, Praveen SP. Chronic Suppurative Osteomyelitis of Subcondylar Region: A Case Report. Int J Clin Pediatr Dent 2013;6(2): 119-123. PMID:25206205

A retrospective study of sintered porous-surfaced dental implants in restoring the edentulous posterior mandible: up to 9 years of functioning.

PubMed

Sohn, Dong-Seok; Kim, Woo-Sung; Lee, Won-Hyuk; Jung, Heui-Seung; Shin, Im-Hee

2010-10-01

The aim of this retrospective study was to evaluate the survival rate of sintered porous-surfaced implants placed in the edentulous posterior mandibles, in relation to implant length and diameter, crown-to-implant ratio, and types of prostheses, for a maximum of 9 years of functioning (mean: 55.8 months; range: 5-108 months). The study group consisted of 43 partially edentulous patients who visited Catholic University Hospital of Daegu and 1 private dental clinic. A total of 122 sintered porous-surfaced implants--Endopore (Innova Life Sciences, Toronto, Ontario, Canada)--were placed in the edentulous posterior mandibles. Two diameter sizes (4.1 and 5.0 mm) and 4 lengths (5.0, 7.0, 9.0, and 12.0 mm) were used. All implants were restored with fixed prostheses. One hundred three implants were splinted and 21 implants were nonsplinted. Panoramic views and periapical radiographs were taken at the time of the first, postoperative, crown placement, and following checkup visits. The survival rates of the implants in relation to length, diameter, crown-to-implant ratio, and types of prostheses were investigated. Statistical data were analyzed using SPSS Win.Ver 14.0 software with the χ² test. The survival rate of the 4.1-mm-diameter implants was 100% and 91.2% for the 5.0-mm-diameter implants. The survival rates of the implants of differing diameters were found to be statistically different (P = 0.005). The survival rates of both the 5.0-mm and 7.0-mm-length implants were 100%. The survival rate of the 9.0-mm-length implants was 97.9% and for the 12.0-mm-length implants was 95.1%. There was no statistical difference in survival rates for the differing lengths of implants. Of the 103 prostheses that were splinted, the survival rate was 98.0%. The survival rate of splinted prostheses was higher than that of the nonsplinted prostheses but was found to be not statistically different. There were no failed cases when the crown-to-implant ratio was <1.0. When the crown-to-implant ratio was between 1.0 and 1.4, the failure rate of the implants was 6.7%. No failure was recorded with the ratio range of 1.5 to 2.0. Relative to the crown-to-implant ratio of 1.0, the failure rates were statistically different (P = 0.048). The cumulative survival rate of the porous-surfaced implants placed in the edentulous posterior mandibles was 97.5%. Short porous-surfaced implants showed satisfactory results after a maximum of 9 years of functioning in the edentulous posterior mandibles.

Accuracy of a computer-aided surgical simulation protocol for orthognathic surgery: a prospective multicenter study.

PubMed

Hsu, Sam Sheng-Pin; Gateno, Jaime; Bell, R Bryan; Hirsch, David L; Markiewicz, Michael R; Teichgraeber, John F; Zhou, Xiaobo; Xia, James J

2013-01-01

The purpose of this prospective multicenter study was to assess the accuracy of a computer-aided surgical simulation (CASS) protocol for orthognathic surgery. The accuracy of the CASS protocol was assessed by comparing planned outcomes with postoperative outcomes of 65 consecutive patients enrolled from 3 centers. Computer-generated surgical splints were used for all patients. For the genioplasty, 1 center used computer-generated chin templates to reposition the chin segment only for patients with asymmetry. Standard intraoperative measurements were used without the chin templates for the remaining patients. The primary outcome measurements were the linear and angular differences for the maxilla, mandible, and chin when the planned and postoperative models were registered at the cranium. The secondary outcome measurements were the maxillary dental midline difference between the planned and postoperative positions and the linear and angular differences of the chin segment between the groups with and without the use of the template. The latter were measured when the planned and postoperative models were registered at the mandibular body. Statistical analyses were performed, and the accuracy was reported using root mean square deviation (RMSD) and the Bland-Altman method for assessing measurement agreement. In the primary outcome measurements, there was no statistically significant difference among the 3 centers for the maxilla and mandible. The largest RMSDs were 1.0 mm and 1.5° for the maxilla and 1.1 mm and 1.8° for the mandible. For the chin, there was a statistically significant difference between the groups with and without the use of the chin template. The chin template group showed excellent accuracy, with the largest positional RMSD of 1.0 mm and the largest orientation RMSD of 2.2°. However, larger variances were observed in the group not using the chin template. This was significant in the anteroposterior and superoinferior directions and the in pitch and yaw orientations. In the secondary outcome measurements, the RMSD of the maxillary dental midline positions was 0.9 mm. When registered at the body of the mandible, the linear and angular differences of the chin segment between the groups with and without the use of the chin template were consistent with the results found in the primary outcome measurements. Using this computer-aided surgical simulation protocol, the computerized plan can be transferred accurately and consistently to the patient to position the maxilla and mandible at the time of surgery. The computer-generated chin template provides greater accuracy in repositioning the chin segment than the intraoperative measurements. Copyright © 2013 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Imaging, Virtual Planning, Design, and Production of Patient-Specific Implants and Clinical Validation in Craniomaxillofacial Surgery

PubMed Central

Dérand, Per; Rännar, Lars-Erik; Hirsch, Jan-M

2012-01-01

The purpose of this article was to describe the workflow from imaging, via virtual design, to manufacturing of patient-specific titanium reconstruction plates, cutting guide and mesh, and its utility in connection with surgical treatment of acquired bone defects in the mandible using additive manufacturing by electron beam melting (EBM). Based on computed tomography scans, polygon skulls were created. Following that virtual treatment plans entailing free microvascular transfer of fibula flaps using patient-specific reconstruction plates, mesh, and cutting guides were designed. The design was based on the specification of a Compact UniLOCK 2.4 Large (Synthes®, Switzerland). The obtained polygon plates were bent virtually round the reconstructed mandibles. Next, the resections of the mandibles were planned virtually. A cutting guide was outlined to facilitate resection, as well as plates and titanium mesh for insertion of bone or bone substitutes. Polygon plates and meshes were converted to stereolithography format and used in the software Magics for preparation of input files for the successive step, additive manufacturing. EBM was used to manufacture the customized implants in a biocompatible titanium grade, Ti6Al4V ELI. The implants and the cutting guide were cleaned and sterilized, then transferred to the operating theater, and applied during surgery. Commercially available software programs are sufficient in order to virtually plan for production of patient-specific implants. Furthermore, EBM-produced implants are fully usable under clinical conditions in reconstruction of acquired defects in the mandible. A good compliance between the treatment plan and the fit was demonstrated during operation. Within the constraints of this article, the authors describe a workflow for production of patient-specific implants, using EBM manufacturing. Titanium cutting guides, reconstruction plates for fixation of microvascular transfer of osteomyocutaneous bone grafts, and mesh to replace resected bone that can function as a carrier for bone or bone substitutes were designed and tested during reconstructive maxillofacial surgery. A clinically fit, well within the requirements for what is needed and obtained using traditional free hand bending of commercially available devices, or even higher precision, was demonstrated in ablative surgery in four patients. PMID:23997858

Imaging, virtual planning, design, and production of patient-specific implants and clinical validation in craniomaxillofacial surgery.

PubMed

Dérand, Per; Rännar, Lars-Erik; Hirsch, Jan-M

2012-09-01

The purpose of this article was to describe the workflow from imaging, via virtual design, to manufacturing of patient-specific titanium reconstruction plates, cutting guide and mesh, and its utility in connection with surgical treatment of acquired bone defects in the mandible using additive manufacturing by electron beam melting (EBM). Based on computed tomography scans, polygon skulls were created. Following that virtual treatment plans entailing free microvascular transfer of fibula flaps using patient-specific reconstruction plates, mesh, and cutting guides were designed. The design was based on the specification of a Compact UniLOCK 2.4 Large (Synthes(®), Switzerland). The obtained polygon plates were bent virtually round the reconstructed mandibles. Next, the resections of the mandibles were planned virtually. A cutting guide was outlined to facilitate resection, as well as plates and titanium mesh for insertion of bone or bone substitutes. Polygon plates and meshes were converted to stereolithography format and used in the software Magics for preparation of input files for the successive step, additive manufacturing. EBM was used to manufacture the customized implants in a biocompatible titanium grade, Ti6Al4V ELI. The implants and the cutting guide were cleaned and sterilized, then transferred to the operating theater, and applied during surgery. Commercially available software programs are sufficient in order to virtually plan for production of patient-specific implants. Furthermore, EBM-produced implants are fully usable under clinical conditions in reconstruction of acquired defects in the mandible. A good compliance between the treatment plan and the fit was demonstrated during operation. Within the constraints of this article, the authors describe a workflow for production of patient-specific implants, using EBM manufacturing. Titanium cutting guides, reconstruction plates for fixation of microvascular transfer of osteomyocutaneous bone grafts, and mesh to replace resected bone that can function as a carrier for bone or bone substitutes were designed and tested during reconstructive maxillofacial surgery. A clinically fit, well within the requirements for what is needed and obtained using traditional free hand bending of commercially available devices, or even higher precision, was demonstrated in ablative surgery in four patients.

Complications and Reoperations in Mandibular Angle Fractures.

PubMed

Chen, Collin L; Zenga, Joseph; Patel, Ruchin; Branham, Gregory

2018-05-01

Mandible angle fractures can be repaired in a variety of ways, with no consensus on the outcomes of complications and reoperation rates. To analyze patient, injury, and surgical factors, including approach to the angle and plating technique, associated with postoperative complications, as well as the rate of reoperation with regard to mandible angle fractures. Retrospective cohort study analyzing the surgical outcomes of patients with mandible angle fractures between January 1, 2000, and December 31, 2015, who underwent open reduction and internal fixation. Patients were eligible if they were aged 18 years or older, had 3 or less mandible fractures with 1 involving the mandibular angle, and had adequate follow-up data. Patients with comminuted angle fractures, bilateral angle fractures, and multiple surgical approaches were excluded. A total of 135 patients were included in the study. All procedures were conducted at a single, large academic hospital located in an urban setting. Major complications and reoperation rates. Major complications included in this study were nonunion, malunion, severe malocclusion, severe infection, and exposed hardware. Of 135 patients 113 (83.7%) were men; median age was 29 years (range, 18-82 years). Eighty-seven patients (64.4%) underwent the transcervical approach and 48 patients (35.6%) received the transoral approach. Fifteen (17.2%) patients in the transcervical group and 9 (18.8%) patients in the transoral group experienced major complications (difference, 1%; 95% CI, -8% to 10%). Thirteen (14.9%) patients in the transcervical group and 8 (16.7%) patients in the transoral group underwent reoperations (difference, 2%; 95% CI, -13% to 17%). Active smoking had a significant effect on the rate of major complications (odds ratio, 4.04; 95% CI, 1.07 to 15.34; P = .04). During repair of noncomminuted mandibular angle fractures, both of the commonly used approaches-transcervical and transoral-can be used during treatment with equal rates of complication and risk of reoperation. For a patient undergoing surgery for mandibular angle fracture, smoking status is more likely to predict surgical outcomes rather than how the surgeon chooses to approach and fixate the fracture. 3.

Effect of Heavy Smoking on Dental Implants Placed in Male Patients Posterior Mandibles: A Prospective Clinical Study.

PubMed

Sun, Cong; Zhao, Jinxiu; Jianghao, Chen; Hong, Tao

2016-12-01

The objective of this study was to evaluate the implant stability and peri-implant tissue response in heavy smokers receiving dental implants due to partially edentulous posterior mandibles. Forty-five ITI Straumann dental implants were placed into the partially edentulous posterior mandibles of 16 heavy smokers and 16 nonsmokers. One implant in each patient was evaluated for implant stability after surgery and before loading, and for the modified plaque index (mPLI), modified sulcus bleeding index (mSBI), probing depth (PD), and marginal bone loss (MBL) after loading. Meanwhile, the osteogenic capability of jaw marrow samples collected from patients was evaluated via an in vitro mineralization test. For both groups, the implant stability quotient (ISQ) initially decreased from the initial ISQ achieved immediately after surgery and then increased starting from 2 weeks postsurgery. However, at 3, 4, 6, and 8 weeks postsurgery, the ISQ differed significantly between nonsmokers and heavy smokers. All implants achieved osseointegration without complications at least by the end of the 12th week postsurgery. At 6 or 12 months postloading, the MBL and PD were significantly higher in heavy smokers than in nonsmokers, whereas the mSBI and mPLI did not differ significantly between the 2 groups. The 1-year cumulative success rate of implants was 100% for both groups. Within the limitations of the present clinical study (such as small sample size and short study duration), which applied the loading at 3 months postoperation, heavy smoking did not affect the cumulative survival rate of dental implants placed at the posterior mandible in male patients, but heavy smoking did negatively affect bone healing around dental implants by decreasing the healing speed. These results implied that it might be of importance to select the right time point to apply the implant loading for heavy smokers. In addition, heavy smoking promoted the loss of marginal bone and the further development of dental pockets. Further clinical studies with larger patient populations are warranted to confirm our findings over a longer study duration.

The Use of Remotely Controlled Mandibular Positioner as a Predictive Screening Tool for Mandibular Advancement Device Therapy in Patients with Obstructive Sleep Apnea through Single-Night Progressive Titration of the Mandible: A Systematic Review

PubMed Central

Kastoer, Chloé; Dieltjens, Marijke; Oorts, Eline; Hamans, Evert; Braem, Marc J.; Van de Heyning, Paul H.; Vanderveken, Olivier M.

2016-01-01

Study Objectives: To perform a review of the current evidence regarding the use of a remotely controlled mandibular positioner (RCMP) and to analyze the efficacy of RCMP as a predictive selection tool in the treatment of obstructive sleep apnea (OSA) with oral appliances that protrude the mandible (OAm), exclusively relying on single-night RCMP titration. Methods: An extensive literature search is performed through PubMed.com, Thecochranelibrary.com (CENTRAL only), Embase.com, and recent conference meeting abstracts in the field. Results: A total of 254 OSA patients from four full-text articles and 5 conference meeting abstracts contribute data to the review. Criteria for successful RCMP test and success with OAm differed between studies. Study populations were not fully comparable due to range-difference in baseline apneahypopnea index (AHI). However, in all studies elimination of airway obstruction events during sleep by RCMP titration predicted OAm therapy success by the determination of the most effective target protrusive position (ETPP). A statistically significant association is found between mean AHI predicted outcome with RCMP and treatment outcome with OAm on polysomnographic or portable sleep monitoring evaluation (p < 0.05). Conclusions: The existing evidence regarding the use of RCMP in patients with OSA indicates that it might be possible to protrude the mandible progressively during sleep under poly(somno)graphic observation by RCMP until respiratory events are eliminated without disturbing sleep or arousing the patient. ETPP as measured by the use of RCMP was significantly associated with success of OAm therapy in the reported studies. RCMP might be a promising instrument for predicting OAm treatment outcome and targeting the degree of mandibular advancement needed. Citation: Kastoer C, Dieltjens M, Oorts E, Hamans E, Braem MJ, Van de Heyning PH, Vanderveken OM. The use of remotely controlled mandibular positioner as a predictive screening tool for mandibular advancement device therapy in patients with obstructive sleep apnea through single-night progressive titration of the mandible: a systematic review. J Clin Sleep Med 2016;12(10):1411–1421. PMID:27568892

Digital volume tomography in the diagnosis of periodontal defects: an in vitro study on native pig and human mandibles.

PubMed

Mengel, Reiner; Candir, Muhsin; Shiratori, Kiyoshi; Flores-de-Jacoby, Lavin

2005-05-01

The aim of this study of native pig and human mandibles was to investigate the accuracy and quality of the representation of periodontal defects by intraoral radiography (IR), panoramic radiography (PR), computed tomography (CT), and digital volume tomography (DVT) in comparison with histologic specimens. Following the standardized preparation of periodontal defects (14 dehiscences, fenestrations, 2- to 3-walled intrabony defects, respectively; Class I, II, and III furcation involvement) in six pig and seven human mandibles, IR, PR, CT, and DVT were performed. The histologic specimens were produced by cutting blocks with the individual defects out of the mandibles, embedding them in acrylic, and producing sagittal and axial microsections. The intrabony defects were measured using appropriate software on the digitized IR and PR images programs. The histologic sections were measured by reflecting stereomicroscopy. The statistical comparison between the measurements of the radiographic images and those of the histologic specimens was performed with Pearson's correlation coefficient. The quality of the radiographic images was determined through the subjective perception and detectability of the intrabony defects by five independent observers. All intrabony defects could be measured in three planes in the CT and DVT scans. Comparison with the histologic specimens yielded a mean deviation of 0.16 +/- 0.10 mm for the CT scans and 0.19 +/- 0.11 mm for the DVT scans. On the IR and PR images, the defects could be detected only in the mesio-distal and craniocaudal planes. In comparison with the histologic specimens, the IR images revealed a mean deviation of 0.33 +/- 0.18 mm and the PR images a mean deviation of 1.07 +/- 0.62 mm. The quality rating of the radiographic images was highest for the DVT scans. Overall, the CT and DVT scans displayed only a slight deviation in the extent of the periodontal defects in comparison with the histologic specimens. Both radiographic imaging techniques permitted imaging of anatomic osseous structures in three planes, true to scale, and without overlay or distortion. The DVT scans showed the best imaging quality.

Digital volume tomography in the diagnosis of peri-implant defects: an in vitro study on native pig mandibles.

PubMed

Mengel, Reiner; Kruse, Björn; Flores-de-Jacoby, Lavin

2006-07-01

The aim of this study of native pig mandibles was to investigate the accuracy and quality of the representation of peri-implant defects by intraoral radiography (IR), panoramic radiography (PR), computer tomography (CT), and digital volume tomography (DVT). The examination was carried out on 19 native pig mandibles. In the toothless sections of the mandibles, one or two implants were inserted. Following the standardized preparation of peri-implant defects (11 each of dehiscences, fenestrations, and 2- to 3-walled intrabony defects), IR, PR, CT, and DVT were performed. The peri-implant defects were measured using appropriate software on the digitized IR and PR image programs. As a control method, the peri-implant bone defects were measured directly using a reflecting stereomicroscope with measuring ocular. The statistical comparison between the measurements of the radiographic scans and those of the direct readings of the peri-implant defects was performed with Pearson's correlation coefficient. The quality of the radiographic scans was determined through the subjective perception and detectability of the peri-implant defects by five independent observers. In the DVT and CT scans, it was possible to measure all the bone defects in three planes. Comparison with the direct peri-implant defect measurements yielded a mean deviation of 0.17+/-0.11 mm for the DVT scans and 0.18+/-0.12 mm for the CT scans. On the IR and PR images, the defects could be detected only in the mesio-distal and cranio-caudal planes. In comparison with the direct measurements of the peri-implant defects, the IR images revealed a mean deviation of 0.34+/-0.30 mm, and the PR images revealed a mean deviation of 0.41+/-0.35 mm. The quality rating of the radiographic images was highest for the DVT scans. Overall, the CT and DVT scans displayed only a slight deviation in the extent of the peri-implant defects. Both radiographic imaging techniques permitted imaging of peri-implant defects in three planes, true to scale, and without overlay or distortion. The DVT scans showed the best imaging quality.

A Rare Case of Malignant Melanoma of the Mandible: 
CT and MRI Findings.

PubMed

Ogura, Ichiro; Sasaki, Yoshihiko; Kameta, Ayako; Sue, Mikiko; Oda, Takaaki

Malignant melanoma of the mandibular gingiva is extremely rare. It is a malignant tumour of melanocytes or their precursor cells, and often misinterpreted as a benign pigmented process. A few reports have described computed tomography (CT) and magnetic resonance imaging (MRI) findings of malignant melanoma in the oral cavity. We report a rare case of malignant melanoma of the mandible and the related CT and MRI findings. Soft tissue algorithm contrast-enhanced CT showed an expansile mass and irregular destruction of alveolar bone in the right side of the mandibular molar area. MR images showed an enhancing mass and the tumour had a low to intermediate signal intensity and a high-signal intensity. Soft tissue algorithm contrast-enhanced CT and MR images showed lymphadenopathy involving the submandibular lymph nodes. Histopathological examination confirmed the diagnosis of malignant melanoma.

Fibrosarcoma of the mandible following supravoltage irradiation. Report of a case.

PubMed

Moloy, P J; Kowal, K A; Siegel, W M

1989-10-01

Supravoltage irradiation is commonly thought not to be carcinogenic. Several recent studies question this concept, as does our case report. A 50-year-old woman with stage 1 squamous carcinoma of the left side of the tongue was treated in 1973 with 73 Gy of supravoltage irradiation. Twelve years later a painful, ulcerated lesion that eventually was shown to be fibrosarcoma developed in the contralateral mandible. The fibrosarcoma in this case fulfills all criteria for diagnosing radiation-induced neoplasia and demonstrates that supravoltage irradiation, like other forms of irradiation, can cause malignancy. The occasional occurrence of sarcoma should be recalled during follow-up of patients treated with supravoltage radiation. Similarly, the possibility of radiation-induced tumors should be considered in planning treatment for younger patients with tumors that can be treated equally well by surgery or irradiation.

New radiometric ages for the BH-1 hominin from Balanica (Serbia): implications for understanding the role of the Balkans in Middle Pleistocene human evolution.

PubMed

Rink, William J; Mercier, Norbert; Mihailović, Dušan; Morley, Mike W; Thompson, Jeroen W; Roksandic, Mirjana

2013-01-01

Newly obtained ages, based on electron spin resonance combined with uranium series isotopic analysis, and infrared/post-infrared luminescence dating, provide a minimum age that lies between 397 and 525 ka for the hominin mandible BH-1 from Mala Balanica cave, Serbia. This confirms it as the easternmost hominin specimen in Europe dated to the Middle Pleistocene. Inferences drawn from the morphology of the mandible BH-1 place it outside currently observed variation of European Homo heidelbergensis. The lack of derived Neandertal traits in BH-1 and its contemporary specimens in Southeast Europe, such as Kocabaş, Vasogliano and Ceprano, coupled with Middle Pleistocene synapomorphies, suggests different evolutionary forces acting in the east of the continent where isolation did not play such an important role during glaciations.

Thin-plate spline analysis of treatment effects of rapid maxillary expansion and face mask therapy in early Class III malocclusions.

PubMed

Baccetti, T; Franchi, L; McNamara, J A

1999-06-01

An effective morphometric method (thin-plate spline analysis) was applied to evaluate shape changes in the craniofacial configuration of a sample of 23 children with Class III malocclusions in the early mixed dentition treated with rapid maxillary expansion and face mask therapy, and compared with a sample of 17 children with untreated Class III malocclusions. Significant treatment-induced changes involved both the maxilla and the mandible. Major deformations consisted of forward displacement of the maxillary complex from the pterygoid region and of anterior morphogenetic rotation of the mandible, due to a significant upward and forward direction of growth of the mandibular condyle. Significant differences in size changes due to reduced increments in mandibular dimensions were associated with significant shape changes in the treated group.

Unified heat kernel regression for diffusion, kernel smoothing and wavelets on manifolds and its application to mandible growth modeling in CT images.

PubMed

Chung, Moo K; Qiu, Anqi; Seo, Seongho; Vorperian, Houri K

2015-05-01

We present a novel kernel regression framework for smoothing scalar surface data using the Laplace-Beltrami eigenfunctions. Starting with the heat kernel constructed from the eigenfunctions, we formulate a new bivariate kernel regression framework as a weighted eigenfunction expansion with the heat kernel as the weights. The new kernel method is mathematically equivalent to isotropic heat diffusion, kernel smoothing and recently popular diffusion wavelets. The numerical implementation is validated on a unit sphere using spherical harmonics. As an illustration, the method is applied to characterize the localized growth pattern of mandible surfaces obtained in CT images between ages 0 and 20 by regressing the length of displacement vectors with respect to a surface template. Copyright © 2015 Elsevier B.V. All rights reserved.

Recent advances in fixation of the craniomaxillofacial skeleton.

PubMed

Meslemani, Danny; Kellman, Robert M

2012-08-01

Fixation of the craniomaxillofacial skeleton is an evolving aspect for facial plastic, oral and maxillofacial, and plastic surgery. This review looks at the recent advances that aid in reduction and fixation of the craniomaxillofacial skeleton. More surgeons are using resorbable plates for craniomaxillofacial fixation. A single miniplate on the inferior border of the mandible may be sufficient to reduce and fixate an angle fracture. Percutaneous K-wires may assist in plating angle fractures. Intraoperative computed tomography (CT) may prove to be useful for assessing reduction and fixation. Resorbable plates are becoming increasingly popular in orthognathic surgery and facial trauma surgery. There are newer operative techniques for fixating the angle of the mandible. Also, the utilization of the intraoperative CT provides immediate feedback for accurate reduction and fixation. Prebent surgical plates save operative time, decrease errors, and provide more accurate fixation.

Mandibular distraction osteogenesis with newly designed electromechanical distractor.

PubMed

Aykan, Andac; Ugurlutan, Rifat; Zor, Fatih; Ozturk, Serdar

2014-07-01

The purposes of this study were to design a fully automatic electromechanical distractor for continuous mandibular distraction osteogenesis and to investigate the efficacy of this newly developed distractor on sheep mandible model. Five sheep underwent unilateral mandibular osteotomy, and the mechanical component of electromechanical distractor was fixed on both sides of the osteotomy site using pins. After a 5-day latency period, the electromechanical distractor was activated at a rate of 0.30 mm per 8 hours using an electronic control unit. The bone was lengthened for 20 days without any intervention to the electromechanical distractor. The animals were killed on the sixth week of the consolidation period, and 5 distracted mandibles were examined through macroscopic observation and computed tomography. Distracted bone length was measured through computed tomography on sagittal slices. The device was tolerated by the distraction process without complications in all animals. New callus formation was observed on the distraction gap. Radiologic evaluation showed new callus formation in the distraction gap. New callus length was found to be, in average, 18.28 mm. In this preliminary study, a newly designed electromechanical distractor was successfully used for mandible distraction, which mainly provided a continuous lengthening during activation period spontaneously without any intervention. We think that the clinical application of this electromechanic distractor may provide patient comfort during distraction. Moreover, electromechanical distractor has the potential for high-resolution movement capacity when compared with annual distraction. The promising results from this prototype are encouraging to further investigations for human applications.

Lower molar and incisor displacement associated with mandibular remodeling.

PubMed

Baumrind, S; Bravo, L A; Ben-Bassat, Y; Curry, S; Korn, E L

1997-01-01

The purpose of this study was to quantify the amount of alveolar modeling at the apices of the mandibular incisor and first molar specifically associated with appositional and resorptive changes on the lower border of the mandible during growth and treatment. Cephalometric data from superimpositions on anterior cranial base, mandibular implants of the Björk type, and anatomical "best fit" of mandibular border structures were integrated using a recently developed strategy, which is described. Data were available at annual intervals between 8.5 and 15.5 years for a previously described sample of approximately 30 children with implants. The average magnitudes of the changes at the root apices of the mandibular first molar and central incisor associated with modeling/remodeling of the mandibular border and symphysis were unexpectedly small. At the molar apex, mean values approximated zero in both anteroposterior and vertical directions. At the incisor apex, mean values approximated zero in the anteroposterior direction and averaged less than 0.15 mm/year in the vertical direction. Standard deviations were roughly equal for the molar and the incisor in both the anteroposterior and vertical directions. Dental displacement associated with surface modeling plays a smaller role in final tooth position in the mandible than in the maxilla. It may also be reasonably inferred that anatomical best-fit superimpositions made in the absence of implants give a more complete picture of hard tissue turnover in the mandible than they do in the maxilla.

Synthesis and characterisation of composite based biohydroxyapatite bovine bone mandible waste (BHAp) doped with 10 wt % amorphous SiO{sub 2} from rice husk by solid state reaction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Asmi, Dwi, E-mail: dwiasmi82@yahoo.com, E-mail: dwi.asmi@fmipa.unila.ac.id; Sulaiman, Ahmad, E-mail: ahmadsulaiman@yahoo.co.id; Oktavia, Irene Lucky, E-mail: ireneluckyo@gmail.com

Effect of 10 wt% amorphous SiO{sub 2} from rice husk addition on the microstructures of biohydroxyapatite (BHAp) obtained from bovine bone was synthesized by solid state reaction. In this study, biohydroxyapatite powder was obtained from bovine bone mandible waste heat treated at 800 °C for 5 h and amorphous SiO{sub 2} powder was extracted from citric acid leaching of rice husk followed by combustion at 700°C for 5 h. The composite powder then mixed and sintered at 1200 °C for 3 h. X-ray diffraction (XRD), Fourier transformed infrared (FTIR) spectroscopy and Scanning electron microscopy (SEM) techniques are utilized to characterize the phase relations,more » functional group present and morphology of the sample. The study has revealed that the processing procedures played an important role in microstructural development of BHAp-10 wt% SiO{sub 2} composite. The XRD study of the raw material revealed that the primary phase material in the heat treated of bovine bone mandible waste is hydroxyapatite and in the combustion of rice husk is amorphous SiO{sub 2}. However, in the composite the hydroxyapatite, β-tricalcium phosphate, and calcium phosphate silicate were observed. The FTIR result show that the hydroxyl stretching band in the composite decrease compared with those of hydroxyapatite spectra and the evolution of morphology was occurred in the composite.« less

Clinical presentation of epignathus teratoma with cleft palate; and duplication of cranial base, tongue, mandible, and pituitary gland.

PubMed

Maeda, Yujiro; Suenaga, Hideyuki; Sugiyama, Madoka; Saijo, Hideto; Hoshi, Kazuto; Mori, Yoshiyuki; Takato, Tsuyoshi

2013-07-01

A 2-day-old girl was diagnosed with an oral epignathus teratoma and an uncommon combination of orofacial malformations including cleft palate; tongue, mandible, cranial base, cervical vertebrae, lower lip, and pituitary gland duplications; and fistula of the glabella and lower lip. Computed tomography revealed that the mass within the nasal cavity had tooth-like calcifications and protruded into the nasopharynx and oral cavity. It was implanted on the anterior wall of the body of the sphenoid bone and was accompanied with mandibular duplication. Magnetic resonance imaging detected duplication of the pituitary gland and confirmed the absence of intracranial communication of the nasopharyngeal mass. The teratoma did not cause respiratory obstruction; however, the patient required continuous nasogastric tube feeding. Usually, an epignathus teratoma is associated with few midline defects and can be corrected with multiple interventions at different time points. The current study describes the surgical procedure comprising excision of the tumor along with reconstructive surgeries of the mandible, tongue, and fistulae undertaken when the infant reached 7 months of age. The cleft palate was repaired at 18 months of age using the Kaplan buccal flap method. Histopathologic examination confirmed a grade 0 teratoma covered with keratinized skin and containing pilosebaceous and sweat glands, adipose tissue, and smooth muscle. The long-term success of this intervention was determined at the follow-up examination conducted at 3 years of age, with no signs of the teratoma recurrence observed.

Maternal environment and craniofacial growth: geometric morphometric analysis of mandibular shape changes with in utero thyroxine overexposure in mice.

PubMed

Kesterke, Matthew J; Judd, Margaret A; Mooney, Mark P; Siegel, Michael I; Elsalanty, Mohammed; Howie, R Nicole; Weinberg, Seth M; Cray, James J

2018-07-01

An estimated 3% of US pregnancies are affected by maternal thyroid dysfunction, with between one and three of every 1000 pregnancies being complicated by overactive maternal thyroid levels. Excess thyroid hormones are linked to neurological impairment and excessive craniofacial variation, affecting both endochondral and intramembranous bone. Using a geometric morphometric approach, this study evaluates the role of in utero thyroxine overexposure on the growth of offspring mandibles in a sample of 241 mice. Canonical variate analysis utilized 16 unilateral mandibular landmarks obtained from 3D micro-computed tomography to assess shape changes between unexposed controls (n = 63) and exposed mice (n = 178). By evaluating shape changes in the mandible among three age groups (15, 20 and 25 days postnatal) and different dosage levels (low, medium and high), this study found that excess maternal thyroxine alters offspring mandibular shape in both age- and dosage-dependent manners. Group differences in overall shape were significant (P < 0.001), and showed major changes in regions of the mandible associated with muscle attachment (coronoid process, gonial angle) and regions of growth largely governed by articulation with the cranial base (condyle) and occlusion (alveolus). These results compliment recent studies demonstrating that maternal thyroxine levels can alter the cranial base and cranial vault of offspring, contributing to a better understanding of both normal and abnormal mandibular development, as well as the medical implications of craniofacial growth and development. © 2018 Anatomical Society.

Reconstruction of the mandible and the maxilla: the evolution of surgical technique.

PubMed

Genden, Eric M

2010-01-01

The upper and lower jaws play an essential role in mastication, articulation, and cosmetic form. The mandible provides support for tongue position and elevation of the larynx during swallowing, while the maxilla provides support for the nasal structures as well as an opposing structure to the mandible during mastication. The evolution of mandibular and maxillary reconstruction dates back to the early 19th century. Before the introduction of free tissue transfer, a variety of local flaps, regional flaps, and prosthetics were introduced, yet each was met with eventual failure. Since the introduction of free tissue transfer, mandibular and maxillary reconstruction has become as much of an art as it has a science. Whether the mandibular or the palatomaxillary defects are a result of trauma, congenital deformity, or tumor extirpation, the resultant effect often disrupts both form and function. With these considerations taken together, jaw reconstruction is a unique undertaking in which the artistic reconstruction of the facial skeleton is met with the science of reestablishing the mechanics of mastication. The site, size, and associated soft-tissue defects represent the 3 most important factors in determining the impact of a given defect on function and aesthetics. There is also an inherent difference between defects that are sustained in a controlled fashion, such as during cancer ablation, and those that result from trauma. The consideration of these complexities in jaw reconstruction is reflected in the wide variety of approaches and techniques that have evolved over the past century.

Synthesis and characterisation of composite based biohydroxyapatite bovine bone mandible waste (BHAp) doped with 10 wt % amorphous SiO2 from rice husk by solid state reaction

NASA Astrophysics Data System (ADS)

Asmi, Dwi; Sulaiman, Ahmad; Oktavia, Irene Lucky; Badaruddin, Muhammad; Zulfia, Anne

2016-04-01

Effect of 10 wt% amorphous SiO2 from rice husk addition on the microstructures of biohydroxyapatite (BHAp) obtained from bovine bone was synthesized by solid state reaction. In this study, biohydroxyapatite powder was obtained from bovine bone mandible waste heat treated at 800 °C for 5 h and amorphous SiO2 powder was extracted from citric acid leaching of rice husk followed by combustion at 700°C for 5 h. The composite powder then mixed and sintered at 1200 °C for 3 h. X-ray diffraction (XRD), Fourier transformed infrared (FTIR) spectroscopy and Scanning electron microscopy (SEM) techniques are utilized to characterize the phase relations, functional group present and morphology of the sample. The study has revealed that the processing procedures played an important role in microstructural development of BHAp-10 wt% SiO2 composite. The XRD study of the raw material revealed that the primary phase material in the heat treated of bovine bone mandible waste is hydroxyapatite and in the combustion of rice husk is amorphous SiO2. However, in the composite the hydroxyapatite, β-tricalcium phosphate, and calcium phosphate silicate were observed. The FTIR result show that the hydroxyl stretching band in the composite decrease compared with those of hydroxyapatite spectra and the evolution of morphology was occurred in the composite.

Computer assisted positioning of the proximal segment after sagittal split osteotomy of the mandible: Preclinical investigation of a novel electromagnetic navigation system.

PubMed

Nova, Igor; Kallus, Sebastian; Berger, Moritz; Ristow, Oliver; Eisenmann, Urs; Freudlsperger, Christian; Hoffmann, Jürgen; Dickhaus, Hartmut

2017-05-01

Modifications of the temporomandibular joint position after mandible osteotomy are reluctantly accepted in orthognathic surgery. To tackle this problem, we developed a new navigation system using miniaturized electromagnetic sensors. Our imageless navigation approach is therefore optimized to avoid complications of previously proposed optical approaches such as the interference with established surgical procedures and the line of sight problem. High oblique sagittal split osteotomies were performed on 6 plastic skull mandibles in a laboratory under conditions comparable to the operating theatre. The subsequent condyle reposition was guided by an intuitive user interface and performed by electromagnetic navigation. To prove the suitability and accuracy of this novel approach for condyle navigation, the positions of 3 titanium marker screws placed on each of the proximal segments were compared using pre- and postoperative Cone Beam Computed Tomography (CBCT) imaging. Guided by the electromagnetic navigation system, positioning of the condyles was highly accurate in all dimensions. Translational discrepancies up to 0,65 mm and rotations up to 0,38° in mean could be measured postoperatively. There were no statistically significant differences between navigation results and CBCT measurements. The intuitive user interface provides a simple way to precisely restore the initial position and orientation of the proximal mandibular segments. Our electromagnetic navigation system therefore yields a promising approach for orthognathic surgery applications. Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Dilemma in pediatric mandible fractures: resorbable or metallic plates?

PubMed

Taylan Filinte, Gaye; Akan, İsmail Mithat; Ayçiçek Çardak, Gülçin Nujen; Özkaya Mutlu, Özay; Aköz, Tayfun

2015-12-01

The aim of this study was to compare the efficiency of resorbable and metallic plates in open reduction and internal fixation of mandible fractures in children. Thirty-one patients (mean age, 8.05 years; range 20 months-14 years) were operated on various fractures of the mandible (26 [60.4%] symphysis- parasymphysis, 12 [27.9%] condylar-subcondylar fractures, 5 [11.6%] angulus and ramus fractures). Twelve patients were treated with resorbable plates and 19 patients with metallic plates. Mean follow-up time was 41 months (11-74 months) in the metallic hardware group and was 22 months (8-35 months) in the resorbable plate group. Both groups were investigated for primary bone healing, complications, number of operations, and mandibular growth. The results were discussed below. Both groups demonstrated primary bone healing. Minor complications were similar in both groups. The metallic group involved secondary operations for plate removal. Mandibular growth was satisfactory in both groups. Resorbable plates cost more than the metallic ones; however, when the secondary operations are included in the total cost, resorbable plates were favourable. As mandibular growth and complication parameters are similar in both groups, resorbable plates are favored due to avoidance of potential odontogenic injury, elimination of long-term foreign body retention and provision of adequate stability for rapid bone healing. However, learning curve and concerns for decreased stability against heavy forces of mastication accompanied with the resorbable plates when compared to the metallic ones should be kept in mind.

Esthetic evaluation of single-tooth implants in the anterior mandible.

PubMed

Hof, Markus; Tepper, Gabor; Koller, Barbara; Krainhöfner, Martin; Watzek, Georg; Pommer, Bernhard

2014-09-01

Single-tooth replacement of anterior mandibular teeth is frequently complicated by insufficient bucco-lingual bone width and limited mesio-distal space available for implant placement. The aim of the present study was to assess implant esthetics in the partially edentulous anterior mandible. Esthetic evaluation of 43 anterior mandibular single-tooth implants in 15 women and 28 men was performed using esthetic indices (PES = Pink Esthetic Score, PI = Papilla Index, SES = Subjective Esthetic Score) as well as subjective patients' Visual Analogue Scale (VAS) ratings. Clinical and radiological parameters (implant and crown dimensions, pocket depth, bleeding on probing, plaque, keratinized mucosa, marginal bone level, and distance to adjacent teeth) were tested for influence. Implant esthetics were judged satisfactory (PES ≤10) in 42% of implants compared with a patient satisfaction rate of 87%. Correlation between objective indices (PES/PI: rs  = 0.62, PES/SES: rs  = -0.73, PI/SES: rs  = -0.48) was highly significant (P ≤ 0.001); however, no association to subjective patients' ratings could be observed. Type of prosthetic restoration (single crown vs. tulip-shaped double crowns), mesio-distal crown width as well as anatomic crown length significantly affected esthetic scores. Patients' judgment, by contrast, could not be associated to any prognostic factor. Subjective patient satisfaction with implant esthetics in the partially edentulous anterior mandible is high, however, remains hard to predict or objectively quantify. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

CAD-CAM plates versus conventional fixation plates for primary mandibular reconstruction: A biomechanical in vitro analysis.

PubMed

Rendenbach, Carsten; Sellenschloh, Kay; Gerbig, Lucca; Morlock, Michael M; Beck-Broichsitter, Benedicta; Smeets, Ralf; Heiland, Max; Huber, Gerd; Hanken, Henning

2017-11-01

CAD/CAM reconstruction plates have become a viable option for mandible reconstruction. The aim of this study was to determine whether CAD/CAM plates provide higher fatigue strength compared with conventional fixation systems. 1.0 mm miniplates, 2.0 mm conventional locking plates (DePuy Synthes, Umkirch, Germany), and 2.0 mm CAD/CAM plates (Materialise, Leuven, Belgium/DePuy Synthes) were used to reconstruct a polyurethane mandible model (Synbone, Malans, CH) with cortical and cancellous bone equivalents. Mastication was simulated via cyclic dynamic testing using a universal testing machine (MTS, Bionix, Eden Prairie, MN, USA) until material failure reached a rate of 1 Hz with increasing loads on the left side. No significant difference was found between the groups until a load of 300 N. At higher loads, vertical displacement differed increasingly, with a poorer performance of miniplates (p = 0.04). Plate breakage occurred in miniplates and conventional locking plates. Screw breakage was recorded as the primary failure mechanism in CAD/CAM plates. Stiffness was significantly higher with the CAD/CAM plates (p = 0.04). CAD/CAM plates and reconstruction plates provide higher fatigue strength than miniplates, and stiffness is highest in CAD/CAM systems. All tested fixation methods seem sufficiently stable for mandible reconstruction. Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

[EMG activities of the head, neck and upper trunk muscles with mandibular movements in healthy adults and mandibular asymmetry patients].

PubMed

Jiang, Ting; Zhang, Zhenkang; Yang, Zhaohui; Yi, Biao; Feng, Hailan; Wang, Xing

2002-03-25

To study the activities of head, neck and upper trunk muscles during mandibular movements in healthy adults and mandibular asymmetry patients. Electromyographic integrogram was used to record and analyze the electromyographic activities of the anterior temporal (Ta), posterior temporal (Tp), sternocleidomastoid (SCM), and trapezius (TRAP) muscles in rest position and during mandibular movement among 10 normal adults and 10 mandibular asymmetry patients. All the four muscles showed constant electromyographic activities when the mandible was in the rest position. The activities of Ta, Tp, and SCM muscles increased with protrusion of mandible, mouth opening, tapping, maximum clenching, and chewing. The activities of Ta and Tp muscles of the patients were 1.7 times greater than that of the normal adults during mandibular movement without occlusion, and were weaker by 50% during mandibular movement with occlusion. The difference between electromyographic activities during mandibular movement and in rest position was less among patients than among normal adults. The TRAP muscle of the patients showed constant electromyographic activities with the activity volume nearly 1.8 times that of the normal adults. The difference between the muscle and its namesake at the opposite side was greater among the patients (21%) than among the normal adults (8%). All the four muscles participate in the maintenance of rest position of mandible and the realization of mandibular movements. The coordination of muscular activities among mandibular asymmetry patients is poorer than that among normal adults.

Professional assessment of facial profile attractiveness.

PubMed

Soh, Jen; Chew, Ming Tak; Wong, Hwee Bee

2005-08-01

The aim of this study was to compare the assessments of Chinese facial profile attractiveness by orthodontists and oral surgeons. The sample comprised 31 dental professionals (20 orthodontists, 11 oral surgeons) in an Asian community. Facial profile photographs and lateral cephalometric radiographs of 2 Chinese adults (1 man, 1 woman) with normal profiles, Class I incisor relationships, and Class I skeletal patterns were digitized. The digital images were modified by altering cephalometric skeletal and dental hard tissue Chinese normative values in increments of 2 standard deviations in the anteroposterior plane to obtain 7 facial profiles for each sex. The images were bimaxillary protrusion, protrusive mandible, retrusive mandible, normal profile (Class I incisor with Class I skeletal pattern), retrusive maxilla, protrusive maxilla, and bimaxillary retrusion. The Mann-Whitney U test was used to determine professional differences in assessment. Multiple regression analysis was performed with age, professional status, sex, and number of years in practice as independent variables. A strong correlation was found in the profile assessment between orthodontists and oral surgeons. Normal and bimaxillary retrusive Chinese male and female profiles were judged to be highly attractive by orthodontists and oral surgeons. Chinese male and female profiles with protrusive mandibles were judged the least attractive. There was a difference in professional opinion about the most attractive male profile (P < .05), with orthodontists preferring a flatter profile and oral surgeons preferring a fuller normal Chinese profile. Sex of dental professionals and number of years in clinical practice were found to affect profile rankings.

Anthropometric Analysis of the Face.

PubMed

Zacharopoulos, Georgios V; Manios, Andreas; Kau, Chung H; Velagrakis, George; Tzanakakis, George N; de Bree, Eelco

2016-01-01

Facial anthropometric analysis is essential for planning cosmetic and reconstructive facial surgery, but has not been available in detail for modern Greeks. In this study, multiple measurements of the face were performed on young Greek males and females to provide a complete facial anthropometric profile of this population and to compare its facial morphology with that of North American Caucasians. Thirty-one direct facial anthropometric measurements were obtained from 152 Greek students. Moreover, the prevalence of the various face types was determined. The resulting data were compared with those published regarding North American Caucasians. A complete set of average anthropometric data was obtained for each sex. Greek males, when compared to Greek females, were found to have statistically significantly longer foreheads as well as greater values in morphologic face height, mandible width, maxillary surface arc distance, and mandibular surface arc distance. In both sexes, the most common face types were mesoprosop, leptoprosop, and hyperleptoprosop. Greek males had significantly wider faces and mandibles than the North American Caucasian males, whereas Greek females had only significantly wider mandibles than their North American counterparts. Differences of statistical significance were noted in the head and face regions among sexes as well as among Greek and North American Caucasians. With the establishment of facial norms for Greek adults, this study contributes to the preoperative planning as well as postoperative evaluation of Greek patients that are, respectively, scheduled for or are to be subjected to facial reconstructive and aesthetic surgery.

Three-dimensional tomographic mapping related to primary stability and structural miniscrew characteristics.

PubMed

Silvestrini Biavati, A; Tecco, S; Migliorati, M; Festa, F; Panza, G; Marzo, G; Gherlone, E; Tetè, S

2011-05-01

To evaluate the maxilla, mandible, and cortical plates on computerized tomographic (CT) scans to achieve accurate three-dimensional bone thickness measurements. We selected the CT scans of 25 subjects (among 102), aged 18-58 years (10 men, 15 women), with nearly complete dentition. We performed interradicular and bucco-lingual (including cortical plate thickness) measurements in dental areas distal to the canines in both alveolar arches, at three levels (5, 8, and 11 mm) from the alveolar ridge. The mean thicknesses of the cortical plates in the maxilla were 1.10 mm buccally and 1.27 mm on the palatal side (p < 0.05). In the mandible, cortical plates were 2.23 mm buccally and 2.02 mm lingually. Mandibular buccal and lingual cortical plates became thicker distally in the second and third molar areas. There was considerable variation in cortical thickness (from 0.25 to 5.50 mm). Based on interradicular distances, only 13% of measured sites in the maxilla were suitable for miniscrew insertion (≥3.3 mm), but 63% of sites were suitable in the mandible. This study showed considerable individual variation in bone thickness. Our data suggested that the palatal/lingual side may provide greater primary stability for miniscrews. The palatal area, between the second upper bicuspid and the first molar, appeared to be the most suitable area for tapered 7- to 9-mm miniscrews, starting at 1.5-2 mm from the alveolar crest. © 2011 John Wiley & Sons A/S.

Bilateral Radicular Cyst in Mandible: An Unusual Case Report

PubMed Central

Bava, Fareed Ahmed; Umar, Dilshad; Bahseer, Bahija; Baroudi, Kusai

2015-01-01

A radicular cyst is one of the furthermost everyday odontogenic cysts of the anterior maxilla, not regularly comprehended in youth. They are found mostly at the apices of the tooth (periapical cyst), lateral surface of the roots (lateral radicular cyst) and remains in the jaw after removal of the offending tooth (residual cyst). The radicular cyst has been catalogued as an inflammatory cyst, as an outcome to pulpal necrosis succeeding caries, with a linked periapical inflammatory reaction. They advance sluggishly and asymptomatic lest infected. Because of this they can extent to big dimensions. Many times it is perplexing to segregate radicular cysts from the obligatory pre-existing chronic periapical periodontitis lesions radiographically. Here, we present a rare case with bilateral radicular cyst in relation to first molar of the mandible in a 19-year-old. Orthopantomograph showed a large unilocular radiolucency with a well-defined border in the periapical region of the first molar on the left side extending from the root of the second premolar to the mesial root of the second molar. Correspondingly another well-defined unilocular radiolucency with a well-defined border was seen on the right side of the mandible. Several treatment possibilities are presented for a radicular cyst such as surgical endodontic treatment, extraction of the transgressing tooth, enucleation with primary closure, and marsupialization trailed by enucleation. The patient management comprised surgical enucleation of cystic sac followed by rehabilitation of the same area. PMID:25859111

Multimodal registration of three-dimensional maxillodental cone beam CT and photogrammetry data over time.

PubMed

Bolandzadeh, N; Bischof, W; Flores-Mir, C; Boulanger, P

2013-01-01

In recent years, one of the foci of orthodontics has been on systems for the evaluation of treatment results and the tracking of tissue variations over time. This can be accomplished through analysing three-dimensional orthodontic images obtained before and after the treatments. Since complementary information is achieved by integrating multiple imaging modalities, cone beam CT (CBCT) and stereophotogrammetry technologies are used in this study to develop a method for tracking bone, teeth and facial soft-tissue variations over time. We propose a two-phase procedure of multimodal (Phase 1) and multitemporal (Phase 2) registration which aligns images taken from the same patient by different imaging modalities and at different times. Extrinsic (for Phase 1) and intrinsic (for Phase 2) landmark-based registration methods are employed as an initiation for a robust iterative closest points algorithm. Since the mandible moves independently of the upper skull, the registration procedure is applied separately on the mandible and the upper skull. The results show that the signed error distributions of both mandible and skull registrations follow a mixture of two Gaussian distributions, corresponding to alignment errors (due to our method) and temporal change over time. We suggest that the large values among the total registration errors correspond to the temporal change resulting from (1) the effect of treatment (i.e. the orthodontic changes of teeth positions); (2) the biological changes such as teeth growth over time, especially for teenagers; and (3) the segmentation procedure and CBCT precision change over time.

Alveoli, teeth, and tooth loss: Understanding the homology of internal mandibular structures in mysticete cetaceans

PubMed Central

Pyenson, Nicholas D.; Uhen, Mark D.; Marshall, Christopher D.

2017-01-01

The evolution of filter feeding in baleen whales (Mysticeti) facilitated a wide range of ecological diversity and extreme gigantism. The innovation of filter feeding evolved in a shift from a mineralized upper and lower dentition in stem mysticetes to keratinous baleen plates that hang only from the roof of the mouth in extant species, which are all edentulous as adults. While all extant mysticetes are born with a mandible lacking a specialized feeding structure (i.e., baleen), the bony surface retains small foramina with elongated sulci that often merge together in what has been termed the alveolar gutter. Because mysticete embryos develop tooth buds that resorb in utero, these foramina have been interpreted as homologous to tooth alveoli in other mammals. Here, we test this homology by creating 3D models of the internal mandibular morphology from terrestrial artiodactyls and fossil and extant cetaceans, including stem cetaceans, odontocetes and mysticetes. We demonstrate that dorsal foramina on the mandible communicate with the mandibular canal via smaller canals, which we explain within the context of known mechanical models of bone resorption. We suggest that these dorsal foramina represent distinct branches of the inferior alveolar nerve (or artery), rather than alveoli homologous with those of other mammals. As a functional explanation, we propose that these branches provide sensation to the dorsal margin of the mandible to facilitate placement and occlusion of the baleen plates during filer feeding. PMID:28542468

The prevalence of crowding, attrition, midline discrepancies and premature tooth loss in the primary dentition of children in Jeddah, Saudi Arabia.

PubMed

Alamoudi, N

1999-01-01

The aim of the present study is to evaluate the prevalence of crowding, attrition, midline discrepancies and premature loss of primary molars in primary dentition of children resident in Jeddah, Saudi Arabia. Five hundred and two (502) children aged 4-6 years old residing in the city of Jeddah, Saudi Arabia provide the data for the analysis. Crowding was found in 14.7% of the subjects crowding in the maxilla occurred in 27 (5.4%) of the children, and 67 (13.4%) in the mandible. Simultaneous crowding in maxilla and mandible was present in 20 (3.98%) of the subject. The prevalence of crowding was significantly higher in the mandible than the maxilla (P > 0.01) and higher in male (P < 0.05). Midline shift was present in 10% of the children with females showing a significantly higher prevalence than the males (P < 0.001). Attrition was present in 167 (33.3%) of the children. One hundred and sixty children (31.9%) had attrition in enamel, and only 7(1.4%) had attrition, which exposed the dentin. Thirty-one (6.2%) out of 502 children had 51 (0.5%) missing teeth out of total number of 10,040 teeth. Tooth #84 was most commonly lost tooth (P < .025). Overall premature loss of 1st primary molars was found to be significantly higher than 2nd primary molars (P < .001).

Radiographic evaluation of anatomical variables in maxilla and mandible in relation to dental implant placement.

PubMed

Chandra, Poornima; Govindaraju, Poornima; Chowdhary, Ramesh

2016-01-01

Oral rehabilitation using implants is rapidly replacing tooth supported prostheses. The success of implants is largely dependent on the quality and quantity of alveolar bone. In this study, we assessed the location of limiting anatomical structures and the amount of alveolar bone available for implant placement. Six hundred digital panoramic radiographs (300 males and 300 females) of dentate patients aged between 15-60 years were selected from the archives. The radiographs were subdivided into 3 groups with age interval of 15 years. Then the location of mental foramen, anterior loop, mandibular canal and maxillary sinus was determined. The amount of bone available was measured in both maxilla and mandible in the premolar and molar regions. The mental foramen was most commonly located at the apex of the second premolar in both the genders. The anterior loop was more readily visible in the younger age group. The amount of bone available in the premolar and molar region of the mandible is nearly the same, while more bone is available in the premolar region of the maxilla. The location and morphology of anatomical structures of the jaws vary not only in different populations but also within the same population. The amount of bone available also showed variations in the same population and in the same individual on the right and left sides. The limiting anatomical structures govern the amount of bone available for possible implant placement.

Analysis of occlusal vertical dimension and mandibular Basal bone height in a nigerian population.

PubMed

Akinbami, Babatunde O; Nsirim, Prince E

2014-01-01

Background. The actual basal bone height of the reconstructed mandible is relevant to achieve normal occlusal vertical dimension for the prosthesis fabricated. The purpose of the study was to determine the mean and baseline values of the occlusal vertical dimension and height of the mandibular basal bone in a Nigerian population. Method. Each participant was asked to bring the upper and lower teeth into contact, while the distance between the nasal sill and dimple on the lower lip was measured (OVD). The skin at lower border of the mandible was marked and the distance between this point and the landmark on the lower lip was measured, MBH. Result. 200 subjects were evaluated. Age range was 16-30 years, mean ± (SD), 21.6 ± (3.1) years. Males had mean ± (SD) of 42.10 ± (5.34) mm for OVD and females 39.72 ± (5.25) mm; acceptable baseline range of OVD for any population will be 34-48 mm (3.4-4.8) cm. All the males had a mean ± (SD), 30.54 ± (6.13) mm for MBH, and all the females 29.63 ± (5.23) mm. Acceptable baseline range of MBH for any population will be 24-37 mm (2.4-3.7) cm. Conclusion. To reconstruct the mandible and still maintain the OVD, heights of bone grafts must not be less than 2 cm or greater than 4 cm.

Multiple keratocysts of the mandible in association with Gorlin-Goltz syndrome: A rare case report

PubMed Central

Kulkarni, Gayithri Harish; Khaji, Shahanavaj I.; Metkari, Suryakant; Kulkarni, Harish S.; Kulkarni, Reshma

2014-01-01

Nevoid basal cell carcinoma syndrome is a syndrome with wide variety of manifestations ranging from oral lesions to skeletal deformities. It calls for due responsibility of maxillofacial surgeon to diagnose the syndrome because very often they are the first health professionals to see the patient for the treatment of keratocystic odontogenic tumor. Keratocystic odontogenic tumor has been the topic of numerous investigators, is known for its potentially aggressive behavior, significant rate of recurrences. KCOT often occurs as a solitary lesion, in some instances multiple keratocysts may occur in association with a syndrome called Gorlin-Goltz syndrome (nevoid BCC, jaw cyst bifid rib basal cell nevus syndrome). Here, we present a case of multiple keratocysts in the mandible in association with skeletal, ocular, cutaneous anomalies in the given clinical scenario, which has profound relevance in the clinical dental practice. PMID:25191087

Multiple keratocysts of the mandible in association with Gorlin-Goltz syndrome: A rare case report.

PubMed

Kulkarni, Gayithri Harish; Khaji, Shahanavaj I; Metkari, Suryakant; Kulkarni, Harish S; Kulkarni, Reshma

2014-07-01

Nevoid basal cell carcinoma syndrome is a syndrome with wide variety of manifestations ranging from oral lesions to skeletal deformities. It calls for due responsibility of maxillofacial surgeon to diagnose the syndrome because very often they are the first health professionals to see the patient for the treatment of keratocystic odontogenic tumor. Keratocystic odontogenic tumor has been the topic of numerous investigators, is known for its potentially aggressive behavior, significant rate of recurrences. KCOT often occurs as a solitary lesion, in some instances multiple keratocysts may occur in association with a syndrome called Gorlin-Goltz syndrome (nevoid BCC, jaw cyst bifid rib basal cell nevus syndrome). Here, we present a case of multiple keratocysts in the mandible in association with skeletal, ocular, cutaneous anomalies in the given clinical scenario, which has profound relevance in the clinical dental practice.

[Study on the 3D mathematical mode of the muscle groups applied to human mandible by a linear programming method].

PubMed

Wang, Dongmei; Yu, Liniu; Zhou, Xianlian; Wang, Chengtao

2004-02-01

Four types of 3D mathematical mode of the muscle groups applied to the human mandible have been developed. One is based on electromyography (EMG) and the others are based on linear programming with different objective function. Each model contains 26 muscle forces and two joint forces, allowing simulation of static bite forces and concomitant joint reaction forces for various bite point locations and mandibular positions. In this paper, the method of image processing to measure the position and direction of muscle forces according to 3D CAD model was built with CT data. Matlab optimization toolbox is applied to solve the three modes based on linear programming. Results show that the model with an objective function requiring a minimum sum of the tensions in the muscles is reasonable and agrees very well with the normal physiology activity.

Influence of Thickness and Contact Surface Geometry of Condylar Stem of TMJ Implant on Its Stability

NASA Astrophysics Data System (ADS)

Arabshahi, Zohreh; Kashani, Jamal; Kadir, Mohammed Rafiq Abdul; Azari, Abbas

The aim of this study is to examine the effect thickness and contact surface geometry of condylar stem of TMJ implant on its stability in total reconstruction system and evaluate the micro strain resulted in bone at fixation screw holes in jaw bone embedded with eight different designs of temporomandibular joint implants. A three dimensional model of a lower mandible of an adult were developed from a Computed Tomography scan images. Eight different TMJ implant designs and fixation screws were modeled. Three dimensional finite element models of eight implanted mandibles were analyzed. The forces assigned to the masticatory muscles for incisal clenching were applied consisting of nine important muscular loads. In chosen loading condition, The results indicated that the anatomical curvature contact surface design of TMJ implant can moderately improve the stability and the strain resulted in fixation screw holes in thinner TMJ implant was diminished in comparison with other thicknesses.

A conservative approach to pediatric mandibular fracture management: outcome and advantages.

PubMed

Khatri, Amit; Kalra, Namita

2011-01-01

Pediatric mandibular fractures are rare and their treatment remains controversial. Management is extremely complicated in mixed dentition as it is inherently dynamic and unstable. Treatment options include soft diet, intermaxillary fixation with eyelet wires, arch bars, circummandibular wiring, or stents. Alternative options include open reduction and internal fixation through either an intraoral or extraoral approach. This case report describes and evaluates the conservative technique of acrylic splint in the treatment of pediatric mandible fracture in a 12-year-old female child. The patient with isolated mandibular fracture was treated with acrylic splint and interdental wiring followed by evaluation of clinical and radiographic healing as well as the somatosensory status. Patient demonstrated clinical union to her pre-injury occlusion by three to four weeks. Panoramic finding supported the finding of clinical examination throughout the study. High osteogenic potential of the pediatric mandible allowed conservative management to be successful in this case.

Lung abscess combined with chronic osteomyelitis of the mandible successfully treated with video-assisted thoracoscopic surgery.

PubMed

Arai, Hiromasa; Inui, Kenji; Watanabe, Keisuke; Watanuki, Kei; Okudela, Koji; Tsuboi, Masahiro; Masuda, Munetaka

2015-04-01

With the progress of antibiotic therapy, the mortality of lung abscess has been improved, and surgical intervention has declined. However, surgery is still required in selected cases that are intractable to antibiotic treatment. Video-assisted thoracoscopic surgery (VATS) is beneficial for treatment and/or diagnosis of pulmonary disease as it provides a less invasive surgical technique and reduces prolongation of post-operative recovery. However, the indication of VATS lobectomy for lung abscess is controversial as a result of particular complications, i.e. wet lung, intrapleural adhesion and ease of bleeding. We herein report a rare combination of lung abscess and osteomyelitis of mandible resulting from the same pathogen successfully treated with VATS lobectomy. We propose VATS lobectomy for lung abscess. This procedure might be the best treatment candidate for selected cases of lung abscess. © 2014 John Wiley & Sons Ltd.

Comparative biomechanical evaluation of mono-cortical osteosynthesis systems for condylar fractures using photoelastic stress analysis.

PubMed

Christopoulos, Panos; Stathopoulos, Panagiotis; Alexandridis, Constantinos; Shetty, Vivek; Caputo, Angelo

2012-10-01

Fractures of the condyle account for 20-30% of all mandibular fractures, and are therefore one of the most common facial injuries. Precise evaluation of the mechanical stresses that develop in a fractured mandible is essential, particularly for the testing of systems currently used for stabilisation of the condylar fragment. Photoelastic stress analysis can be used to visualise alterations in the strain that is induced in the mandible by a fracture, and in the osteosynthesis materials used to stabilise it. This method, used on currently used osteosynthesis materials, showed that stabilisation of a subcondylar fracture with a single miniplate does not provide enough stability, whereas the use of two miniplates - properly positioned - offers sufficient stability in all loading conditions. A microplate may be used as a tension-resisting plate with equally good results. Copyright © 2011 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Contribution of 3D printing to mandibular reconstruction after cancer.

PubMed

Dupret-Bories, A; Vergez, S; Meresse, T; Brouillet, F; Bertrand, G

2018-04-01

Three-dimensional (3D) printing is booming in the medical field. This technology increases the possibilities of personalized treatment for patients, while lowering manufacturing costs. To facilitate mandibular reconstruction with fibula free flap, some companies propose cutting guides obtained by CT-guided moulding. However, these guides are prohibitively expensive (€2,000 to €6,000). Based on a partnership with the CNRS, engineering students and a biomedical company, the authors have developed cutting guides and 3D-printed mandible templates, deliverable in 7days and at a lower cost. The novelty of this project is the speed of product development at a significantly lower price. In this technical note, the authors describe the logistic chain of production of mandible templates and cutting guides, as well as the results obtained. The goal is to allow access to this technology to all patients in the near future. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Cemento-ossifying fibroma of mandible mimicking complex composite odontome.

PubMed

Dewan, Hitesh Sudarshan; Dewan, Sudarshan Kumar; Bahl, Sumit; Tushar Parekh, Parth

2016-10-19

Cemento-ossifying fibroma (COF) is a fibro-osseous lesion or non-odontogenic tumour that affects craniofacial bones. These lesions are included in the spectrum of fibro-osseous lesions arising from periodontal ligament cells, which can deposit combination of cementum and bone surrounded by fibrous tissue. It clinically, macroscopically and radiologically resembles complex composite odontome and can be differentiated only on the basis of histopathology. They usually occur solitarily as a painless and expansile spherical or ovoid jawbone mass that may displace the roots of adjacent teeth. They predominantly occur in females in third and fourth decades of life. We present a case report of a 20-year-old man, with a mildly painful swelling in the mandible which was successfully treated with enucleation and diagnosed as COF. Its resemblance to complex composite odontome and unique surgical approach are highlighted in this paper. 2016 BMJ Publishing Group Ltd.

Oral trauma and dental emergency management recommendations of first-aid textbooks and manuals.

PubMed

Zadik, Yehuda

2007-10-01

The recommendations of oral trauma and dental emergencies management of nine first-aid textbooks and manuals from the last two decades were evaluated. Only one book includes all the relevant topics: dental anatomy, management of tooth luxations and avulsion, tooth fracture, mandible dislocation, jaw fracture, intraoral bleeding and dental pain. Two books recommend self-replantation of an avulsed tooth, but four books detail the storage media and evaluate the importance of a quick referral to a dental surgery. In three first-aid books, the only mention of oral trauma is the hazard of choking from tooth fragments, and in one other book, only mandible dislocation is mentioned as oral trauma. The insufficient information of oral trauma management in these first-aid texts partly explains the previous reports of poor and inadequate knowledge in that topic among medics, teachers and the general public.

Therapeutic Challenge in a Severely Atrophic Mandible

PubMed Central

Janev, Edvard; Janeva, Nadica; Peeva–Petreska, Marija; Mitic, Kristina

2018-01-01

BACKGROUND: After tooth loss, however, severely atrophic residual alveolar ridges are fairly common, especially in patients who have been edentulous for a long period. Anterior area of the mandible is areas where clinicians have greater anatomical limitations. Reduced alveolar bone height very often represents a contraindication to implant therapy, unless a procedure such as a ridge augmentation is performed. CASE REPORT: This study aims to present two separate cases in highly selected edentulous anterior mandibular sites, where one stage, mini implants were used to support total prostheses. Small diameter implants have been used for retention of complete removable mandibular overdentures. This is an excellent option for those who suffer from the inconvenience and embarrassment of loose lower dentures and are tired of having to use sticky pastes and creams to make their dentures stay in place. CONCLUSION: Small diameter implants, when used multiples may offer adequate support for a removable prosthesis and overcome this problem. PMID:29610621

The cost of being an omnivore: mandible wear from plant feeding in a true bug

NASA Astrophysics Data System (ADS)

Roitberg, Bernard D.; Gillespie, David R.; Quiring, Donald M. J.; Alma, Colleen R.; Jenner, Wade H.; Perry, Jennifer; Peterson, Jason H.; Salomon, Maxence; Vanlaerhoven, Sherah

2005-09-01

Evolutionary and ecological transitions from carnivorous to omnivorous feeding may be constrained by the ability of the animal to cope with disparate types of foods, even if preadaptations for such behaviour exist. The omnivorous true bug, Dicyphus hesperus (Hemiptera: Miridae) requires both animals (small, soft-bodied insects) and plants in its diet and obtains the majority of its dietary and metabolic water from plant feeding. Serrations on the lateral margins of the mandibular stylets wear with age, and this wear is exacerbated when the insects feed on plants compared to those provided free water and no plants. D. hesperus that feed on plants attack fewer prey but consumed similar amounts of prey tissue compared to individuals that were provided free water. Although others have shown mandible wear for plant-chewing animals we show for the first time that plant feeding can impose similar wear on plant-piercing animals as well.

Bone growth and calcium balance during simulated weightlessness in the rat

NASA Technical Reports Server (NTRS)

Roer, Robert D.; Dillaman, Richard M.

1990-01-01

Rats, age 28 days, experiencing tail suspension in modified metabolic cages for 1, 2, and 3 wk were compared with littermate controls. Food and water consumption, urinary and fecal Ca excretion, and serum Ca were measured; hearts, fore- and hindlimb bones, skulls, and mandibles were removed for determination of wet, dry, and ash weights and Ca concentration and for histological examination. Weight gain and Ca intake and excretion were the same for both groups; both displayed net Ca gain. Suspended rats had significantly lower wet, dry, and ash weights of femora and tibiae. Dry weights of the humeri and radii/ulnae were moderately higher, and the skull and mandible dry and ash weights were significantly higher in suspended than in control rats. Cortical thickness of the femur, but not humerus, was less in suspended rats. The data are consistent with the hypothesis that bone growth is influenced by the cardiovascular changes associated with tail suspension.

Unified Heat Kernel Regression for Diffusion, Kernel Smoothing and Wavelets on Manifolds and Its Application to Mandible Growth Modeling in CT Images

PubMed Central

Chung, Moo K.; Qiu, Anqi; Seo, Seongho; Vorperian, Houri K.

2014-01-01

We present a novel kernel regression framework for smoothing scalar surface data using the Laplace-Beltrami eigenfunctions. Starting with the heat kernel constructed from the eigenfunctions, we formulate a new bivariate kernel regression framework as a weighted eigenfunction expansion with the heat kernel as the weights. The new kernel regression is mathematically equivalent to isotropic heat diffusion, kernel smoothing and recently popular diffusion wavelets. Unlike many previous partial differential equation based approaches involving diffusion, our approach represents the solution of diffusion analytically, reducing numerical inaccuracy and slow convergence. The numerical implementation is validated on a unit sphere using spherical harmonics. As an illustration, we have applied the method in characterizing the localized growth pattern of mandible surfaces obtained in CT images from subjects between ages 0 and 20 years by regressing the length of displacement vectors with respect to the template surface. PMID:25791435

Locally infiltrative ameloblastic fibroma in a rhesus macaque (Macaca mulatta) with characterizations of its proliferating activity and biological behavior

PubMed Central

Liu, David X.; Doyle, Lara A.; Bouljihad, Mostafa T.; Didier, Peter J.; Gilbert, Margaret H.; Wang, Xiaolei; Pahar, Bapi; Bohm, Rudolf P.; Veazey, Ronald S.; Lackner, Andrew A.

2014-01-01

An 8-year-old male rhesus macaque (Macaca mulatta) presented with unilateral enlargement of the left mandible. Radiographs revealed a marked expansion of the left mandible with a multilocular radiolucent mass with abundant osteolysis. The mass was grossly firm, fleshy, and gelatinous on the cut surface. Histologically, the mass was locally infiltrative and composed of neoplastic epithelial and mesenchymal components that stained positive for cytokeratin and vimentin, respectively. Occasional densely spherical condensations of fibroblasts resembling the cap stage of odontogenesis were present in the mesenchyma. Immunohistochemical staining with Ki-67, S-100, and CD34 indicated that both epithelial and mesenchymal components of the neoplasm had low proliferation. Alcian blue, periodic acid–Schiff, and trichrome stains showed an immature stromal component with no collagen formation. Based on the clinical, histologic, and immunophenotypic features, the tumor was identified as a locally infiltrative ameloblastic fibroma. PMID:22529141

Two new species of Parasaveljevia Wieser, 1953 (Thoracostomopsidae, Nematoda) from Argentinean coasts (Chubut, Argentina).

PubMed

Pastor, Catalina; Lo Russo, Virginia; Villares, Gabriela

2015-10-06

Two new Parasavaljevia species are described, one from Puerto Madryn, and one from El Límite beach, San Jorge Gulf, Chubut Province, Argentina. The two species are characterised by a combination of characters. Parasavaljevia uncinoa n. sp. is characterised by having a long rectangular cirrus, positioned at the level of the inner labial setae, rectangular mandibles with prominent lateral hooks bearing denticles in three lines of nine each, and six cephalic setae of the same length, inserted at the anterior end of a small head capsule. Parasavaljevia limitense n. sp. is characterized by having a cirrus posterior positioned, between the labial and cephalic setae, rectangular-arched mandibles bearing denticles in five lines of ten each in a gradient of sizes; a small buccal cavity, small cephalic capsule and abundant cervical setae (4+10). An emendation of the genus diagnosis and a new key are given and discussed.

New Radiometric Ages for the BH-1 Hominin from Balanica (Serbia): Implications for Understanding the Role of the Balkans in Middle Pleistocene Human Evolution

PubMed Central

Rink, William J.; Mercier, Norbert; Mihailović, Dušan; Morley, Mike W.; Thompson, Jeroen W.; Roksandic, Mirjana

2013-01-01

Newly obtained ages, based on electron spin resonance combined with uranium series isotopic analysis, and infrared/post-infrared luminescence dating, provide a minimum age that lies between 397 and 525 ka for the hominin mandible BH-1 from Mala Balanica cave, Serbia. This confirms it as the easternmost hominin specimen in Europe dated to the Middle Pleistocene. Inferences drawn from the morphology of the mandible BH-1 place it outside currently observed variation of European Homo heidelbergensis. The lack of derived Neandertal traits in BH-1 and its contemporary specimens in Southeast Europe, such as Kocabaş, Vasogliano and Ceprano, coupled with Middle Pleistocene synapomorphies, suggests different evolutionary forces acting in the east of the continent where isolation did not play such an important role during glaciations. PMID:23405085

Prevalence of mandibular fractures reported at C.S.M.S.S Dental College, aurangabad from february 2008 to september 2009

PubMed Central

Ghodke, Monali H.; Bhoyar, Subhash C.; Shah, Seemit V.

2013-01-01

Aim: The aim of this study is to determine the etiology, frequency of mandibular fractures among different age and sex, to determine the frequency of anatomic distribution, and to report the different modalities of treatment provided to the patients reported at our institution from February 2008 to September 2009. Materials and Methods: All patients fulfilling the selection criteria and having mandible fracture were selected for the study. Patient information was collected by means of a medical data form specifically designed for the present study. The values were subjected to Z and Chi-square tests. Results: Out of 35 patients, thirty one were males (88.57%) and four were females (11.43%) with a male:female ratio of 8:1. We found a peak occurrence in young adults, aged 21-30 years (n = 15, 42.86%). In case of etiology of fracture, road traffic accidents (RTAs) was the most common (n = 25, 71.43%) and condyle was most frequently involved site (n = 19, 38.78%). In most (n = 16, 45.71%) of the patients, an open reduction and rigid internal fixation using bone plate and screws was done. Conclusion: In the present study, the prevalence of mandible fractures was more prevalent in male patients, especially during the 3rd decade of life. The most common cause was road traffic accident and the more frequently affected region was condyle of the mandible. Open reduction and rigid internal fixation using miniplates and screws was the most commonly used treatment. PMID:24778980

Mandibular fracture patterns consistent with posterior maxillary fractures involving the posterior maxillary sinus, pterygoid plate or both: CT characteristics.

PubMed

Imai, T; Sukegawa, S; Kanno, T; Fujita, G; Yamamoto, N; Furuki, Y; Michizawa, M

2014-01-01

The aim of this study was to determine the incidence of posterior maxillary fractures involving the posterior maxillary sinus wall, pterygoid plate or both, unrelated to major midface fractures in patients with mandibular fractures, and to characterize associated fractures. A CT study was performed in patients with mandibular fractures to identify posterior maxillary fractures. Patients aged under 16 years, those with mandibular fractures involving only dentoalveolar components and those with concurrent major midfacial fractures were excluded. 13 (6.7%) of 194 patients with mandibular fractures also had posterior maxillary fractures (case group). The injury pattern correlated with the external force directed to the lateral side of the mandible (p < 0.001), alcohol consumption (p = 0.049), the presence of multifocal fractures (p = 0.002) and the fracture regions in the symphysis/parasymphysis (p = 0.001) and the angle/ramus (p = 0.001). No significant difference between the case and non-case groups was seen for age, sex or cause of trauma. Non-displaced fractures in the ipsilateral posterior mandible occurred with significant frequency (p = 0.001) when the posterior maxillary fractures involved only the sinus. Mandibular fractures accompanied by posterior maxillary fractures are not rare. The finding of a unilateral posterior maxillary fracture on CT may aid the efficient radiological examination of the mandible based on possible patterns of associated fractures, as follows: in the ipsilateral posterior region as a direct fracture when the impact is a medially directed force, and in the symphysis/parasymphysis or contralateral condylar neck as an indirect fracture.

The scaling of tongue projection in the veiled chameleon, Chamaeleo calyptratus.

PubMed

Herrel, Anthony; Redding, Chrystal L; Meyers, J Jay; Nishikawa, Kiisa C

2014-08-01

Within a year of hatching, chameleons can grow by up to two orders of magnitude in body mass. Rapid growth of the feeding mechanism means that bones, muscles, and movements change as chameleons grow while needing to maintain function. A previous morphological study showed that the musculoskeletal components of the feeding apparatus grow with negative allometry relative to snout-vent length (SVL) in chameleons. Here, we investigate the scaling of prey capture kinematics and muscle physiological cross-sectional area in the veiled chameleon, Chamaeleo calyptratus. The chameleons used in this study varied in size from approximately 3 to 18 cm SVL (1-200 g). Feeding sequences of 12 chameleons of different sizes were filmed and the timing of movements and the displacements and velocities of the jaws, tongue, and the hyolingual apparatus were quantified. Our results show that most muscle cross-sectional areas as well as tongue and hyoid mass scaled with isometry relative to mandible length, yet with negative allometry relative to SVL. Durations of movement also scaled with negative allometry relative to SVL and mandible length. Distances and angles generally scaled as predicted under geometric similarity (slopes of 1 and 0, respectively), while velocities generally scaled with slopes greater than 0 relative to SVL and mandible length. These data indicate that the velocity of jaw and tongue movements is generally greater in adults compared to juveniles. The discrepancy between the scaling of cross-sectional areas versus movements suggests changes in the energy storage and release mechanisms implicated in tongue projection. Copyright © 2014 Elsevier GmbH. All rights reserved.

Removal of Dental Implants Using the Erbium,Chromium:Yttrium-Scandium-Gallium-Garnet Laser and the Conventional Trephine Bur: An in Vitro Comparative Study.

PubMed

Hajji, Mohammad; Franzen, Rene; Grümer, Stefan; Modabber, Ali; Nasher, Riman; Prescher, Andreas; Gutknecht, Norbert

2016-02-01

The purpose of this study was to compare the conventional trephine bur and the Erbium,chromium: yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser in removing implants in terms of the volume of removed bone, duration of the procedure, and morphological changes on the bone surface. Three human mandibles were utilized, and four implants were inserted in each mandible using a drilling handpiece and burs. The implants were divided into two groups (n = 6) in which two implants from each mandible were removed using a trephine bur running at 1200 rounds per minute (rpm) with water irrigation. The remaining implants (n = 6) were removed with Er,Cr:YSGG laser (power 6 W, frequency 20 Hz, pulse duration 50 μs, water 60, air 30). The volume of bone loss was calculated by filling the holes with mercury and measuring its volume. The preparation time was measured with a digital stopwatch and the postoperative bone surfaces were examined under a scanning electron microscope (SEM). The laser group exhibited a smaller amount of bone loss than the trephine bur group, whereas the latter required a shorter time of preparation. SEM revealed empty trabecular spaces with no signs of carbonization and well-defined edges in the laser group, whereas the trephine group displayed a surface covered with a smear layer and microcracks. The Er,Cr:YSGG laser provides superior results over the trephine bur in terms of bone preservation, thermal damage, and cutting efficiency.

Dosimetric study of mandible examinations performed with three cone-beam computed tomography scanners.

PubMed

Khoury, Helen J; Andrade, Marcos E; Araujo, Max Well; Brasileiro, Izabela V; Kramer, Richard; Huda, Amir

2015-07-01

The objective of this work was to evaluate the air kerma-area product (PKA) and the skin absorbed dose in the region of the eyes, salivary glands and thyroid of the patient from mandible examinations performed with three cone-beam computed tomography (CBCT) scanners, i.e. i-CAT classic, Gendex CB-500 and PreXion 3D. For the dosimetric evaluation, an anthropomorphic head phantom (model RS-250) was used to simulate an adult patient. The CBCT examinations were performed using standard and high-resolution protocols for mandible acquisitions for adult patients. During the phantom's exposure, the PKA was measured using an ionising chamber and the absorbed doses to the skin in the region of the eyes, thyroid and salivary glands were estimated using thermoluminescence dosemeters (TLDs) positioned on the phantom's surface. The PKA values estimated with the CBCT scanners varied from 26 to 138 µGy m(2). Skin absorbed doses in the region of the eyes varied from 0.07 to 0.34 mGy; at the parotid glands, from 1.31 to 5.93 mGy; at the submandibular glands, from 1.41 to 6.86 mGy; and at the thyroid, from 0.18 to 2.45 mGy. PKA and absorbed doses showed the highest values for the PreXion 3D scanner due to the use of the continuous exposure mode and a high current-time product. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

[Fixed appliance therapy in patients with impaired short-circuit in the anterior part of the maxilla].

PubMed

Matthews-Brzozowska, Teresa; Pobol-Aidi, Małgorzata; Cudziło, Dorota

2015-03-01

Malocclusion in the anterior segment of maxilla and mandible are easily visible not only for dentists but also for the doctors of other specialties. Early diagnosis and appropriate therapy is important not only for occlusion but also for aesthetic reasons. The aim of the paper is to evaluate the anterior segment of maxilla and mandible in patients with malocclusion in this part and correct occlusion in the lateral segments. Medical documentation, i.e. medical history, extra- and intraoral radiograms, diagnostic casts, panoramic and lateral cephalometric radiograms of patients aged 7-12 diagnosed with malocclusion in the anterior segment of maxilla and mandible and who were treated with a fixed sectional appliance and facemask was analyzed. Descriptive and cephalometric features were analyzed before (T1) and after (T2) the treatment in 25 children. The differences between the status before and after the treatment, and the extent of change between T1 and T2 were analyzed. Statistical analysis of mean values of selected metrical features before (at T1) and after (at T2) the treatment has revealed that all metrical features concerning soft, bony and dental tissues determining the facial profile, the shape of the bony and dental structures have changed and have reached values which are closer to the norm for the population for selected features. The changes were statistically significant (p<0.0001). Treatment with fixed appliances segment facemask resulted in statistically significant improvement in the parameters investigated, which demonstrates the applicability of this therapy in the treatment of anterior maxillary segment in patients with mixed dentition. © 2015 MEDPRESS.

Patterns of covariation in the masticatory apparatus of hystricognathous rodents: implications for evolution and diversification.

PubMed

Hautier, Lionel; Lebrun, Renaud; Cox, Philip G

2012-12-01

The mammalian masticatory apparatus is a highly plastic region of the skull. In this study, a quantification of shape variation, the separation of phylogeny from ecology in the genesis of shape brings new insights on the relationships between morphological changes in the cranium, mandible, and muscle architecture. Our study focuses on the Ctenohystrica, a clade that is remarkably diverse and exemplifies a rich evolutionary history in the Old and New World. Current and past rodent diversity brings out the limitations of the qualitative descriptive approach and highlights the need for using integrative quantitative methods. We present here the first descriptive comparison of the whole masticatory apparatus within the Ctenohystrica, by combining geometric morphometric approaches with a noninvasive method of dissection in 3D, iodine-enhanced microcomputed tomography. We used these methods to explore the patterns of covariation between the cranium and the mandible, and the interspecific morphological variation of the skull with regard to several factors such as phylogeny, activity period, type of habitat, and diet. Our study revealed strong phylogenetic and ecological imprints on the morphological traits associated with masticatory mechanics. We showed that, despite a high diversification of lineages, the evolutionary history of Ctenohystrica comprises only a small number of morphotypes for the skull and mandible. The position of the eye was suggested as a key factor determining morphological evolution of the masticatory apparatus by limiting the number of possible pathways and promoting convergent evolution toward new habitats and diets between different clades. Copyright © 2012 Wiley Periodicals, Inc.

Combined micro computed tomography and histology study of bone augmentation and distraction osteogenesis

NASA Astrophysics Data System (ADS)

Ilgenstein, Bernd; Deyhle, Hans; Jaquiery, Claude; Kunz, Christoph; Stalder, Anja; Stübinger, Stefan; Jundt, Gernot; Beckmann, Felix; Müller, Bert; Hieber, Simone E.

2012-10-01

Bone augmentation is a vital part of surgical interventions of the oral and maxillofacial area including dental implantology. Prior to implant placement, sufficient bone volume is needed to reduce the risk of peri-implantitis. While augmentation using harvested autologous bone is still considered as gold standard, many surgeons prefer bone substitutes to reduce operation time and to avoid donor site morbidity. To assess the osteogenic efficacy of commercially available augmentation materials we analyzed drill cores extracted before implant insertion. In younger patients, distraction osteogenesis is successfully applied to correct craniofacial deformities through targeted bone formation. To study the influence of mesenchymal stem cells on bone regeneration during distraction osteogenesis, human mesenchymal stem cells were injected into the distraction gap of nude rat mandibles immediately after osteotomy. The distraction was performed over eleven days to reach a distraction gap of 6 mm. Both the rat mandibles and the drill cores were scanned using synchrotron radiation-based micro computed tomography. The three-dimensional data were manually registered and compared with corresponding two-dimensional histological sections to assess bone regeneration and its morphology. The analysis of the rat mandibles indicates that bone formation is enhanced by mesenchymal stem cells injected before distraction. The bone substitutes yielded a wide range of bone volume and degree of resorption. The volume fraction of the newly formed bone was determined to 34.4% in the computed tomography dataset for the augmentation material Geistlich Bio-Oss®. The combination of computed tomography and histology allowed a complementary assessment for both bone augmentation and distraction osteogenesis.

Metastatic breast carcinoma in the mandible presenting as a periodontal abscess: a case report.

PubMed

Poulias, Evmenios; Melakopoulos, Ioannis; Tosios, Konstantinos

2011-07-01

Tumors can metastasize to the oral cavity and affect the jaws, soft tissue and salivary glands. Oral cavity metastases are considered rare and represent approximately 1% of all oral malignancies. Because of their rarity and atypical clinical and radiographic appearance, metastatic lesions are considered a diagnostic challenge. The purpose of this report is to present a rare case of a metastatic breast carcinoma mimicking a periodontal abscess in the mandible. A 55-year-old Caucasian woman was referred to our clinic for evaluation of bisphosphonate-induced jaw osteonecrosis. She had undergone modified radical mastectomy with axillary lymph node dissection for invasive ductal carcinoma of the left breast. Her clinical examination showed diffuse swelling and a periodontal pocket of 6 mm exhibiting suppuration in the posterior right mandible. Moreover, paresthesia of the lower right lip and chin was noted. There were no significant radiographic findings other than alveolar bone loss due to her periodontal disease. Although the lesion resembled a periodontal abscess, metastatic carcinoma of the breast was suspected on the basis of the patient's medical history. The area was biopsied, and histological analysis confirmed the final diagnosis of metastatic breast carcinoma. The general dentist or dental specialist should maintain a high level of suspicion while evaluating patients with a history of cancer. Paresthesias of the lower lip and the chin should be considered ominous signs of metastatic disease. This case highlights the importance of the value of a detailed medical history and thorough clinical examination for the early detection of metastatic tumors in the oral cavity.

Metastatic breast carcinoma in the mandible presenting as a periodontal abscess: a case report

PubMed Central

2011-01-01

Introduction Tumors can metastasize to the oral cavity and affect the jaws, soft tissue and salivary glands. Oral cavity metastases are considered rare and represent approximately 1% of all oral malignancies. Because of their rarity and atypical clinical and radiographic appearance, metastatic lesions are considered a diagnostic challenge. The purpose of this report is to present a rare case of a metastatic breast carcinoma mimicking a periodontal abscess in the mandible. Case presentation A 55-year-old Caucasian woman was referred to our clinic for evaluation of bisphosphonate-induced jaw osteonecrosis. She had undergone modified radical mastectomy with axillary lymph node dissection for invasive ductal carcinoma of the left breast. Her clinical examination showed diffuse swelling and a periodontal pocket of 6 mm exhibiting suppuration in the posterior right mandible. Moreover, paresthesia of the lower right lip and chin was noted. There were no significant radiographic findings other than alveolar bone loss due to her periodontal disease. Although the lesion resembled a periodontal abscess, metastatic carcinoma of the breast was suspected on the basis of the patient's medical history. The area was biopsied, and histological analysis confirmed the final diagnosis of metastatic breast carcinoma. Conclusion The general dentist or dental specialist should maintain a high level of suspicion while evaluating patients with a history of cancer. Paresthesias of the lower lip and the chin should be considered ominous signs of metastatic disease. This case highlights the importance of the value of a detailed medical history and thorough clinical examination for the early detection of metastatic tumors in the oral cavity. PMID:21722359

Postnatal changes in the growth dynamics of the human face revealed from bone modelling patterns.

PubMed

Martinez-Maza, Cayetana; Rosas, Antonio; Nieto-Díaz, Manuel

2013-09-01

Human skull morphology results from complex processes that involve the coordinated growth and interaction of its skeletal components to keep a functional and structural balance. Previous histological works have studied the growth of different craniofacial regions and their relationship to functional spaces in humans up to 14 years old. Nevertheless, how the growth dynamics of the facial skeleton and the mandible are related and how this relationship changes through the late ontogeny remain poorly understood. To approach these two questions, we have compared the bone modelling activities of the craniofacial skeleton from a sample of subadult and adult humans. In this study, we have established for the first time the bone modelling pattern of the face and the mandible from adult humans. Our analyses reveal a patchy distribution of the bone modelling fields (overemphasized by the presence of surface islands with no histological information) reflecting the complex growth dynamics associated to the individual morphology. Subadult and adult specimens show important differences in the bone modelling patterns of the anterior region of the facial skeleton and the posterior region of the mandible. These differences indicate developmental changes in the growth directions of the whole craniofacial complex, from a predominantly downward growth in subadults that turns to a forward growth observed in the adult craniofacial skeleton. We hypothesize that these ontogenetic changes would respond to the physiological and physical requirements to enlarge the oral and nasal cavities once maturation of the brain and the closure of the cranial sutures have taken place during craniofacial development. © 2013 Anatomical Society.

A digital volumetric tomography (DVT) study in the mandibular molar region for miniscrew placement during mixed dentition

PubMed Central

Bhattad, Mayur S.; Baliga, Sudhindra; Vibhute, Pavan

2015-01-01

OBJECTIVE: To assess bone thickness for miniscrew placement in the mandible during mixed dentition by using digital volumetric tomograph (DVT). MATERIAL AND METHODS: A total of 15 healthy patients aged 8-10 years old, with early exfoliated mandibular second deciduous molar, were included. DVT images of one quadrant of the mandible were obtained using Kodak extraoral imaging systems and analyzed by Kodak dental imaging software. The error of the method (EM) was calculated using Dahlberg's formula. Mean and standard deviation were calculated at 6 and 8 mm from the cementoenamel junction (CEJ).Paired t-test was used to analyze the measurements. RESULTS: Buccal cortical bone thickness, mesiodistal width and buccolingual bone depth at 6 mm were found to be 1.73 + 0.41, 2.15 + 0.49 and 13.18 + 1.22 mm, respectively; while at 8 mm measurements were 2.42 + 0.34, 2.48 + 0.33 and 13.65 + 1.25 mm, respectively. EM for buccal cortical bone thickness, mesiodistal width and buccolingual bone depth was 0.58, 0.40 and 0.48, respectively. The difference in measurement at 6 and 8 mm for buccal cortical plate thickness (P < 0.05) and buccolingual bone thickness (P < 0.05) was found to be significant, whereas for mesiodistal width it was insignificant (P > 0.05). CONCLUSION: Bone thickness measurement has shown promising evidence for safe placement of miniscrews in the mandible during mixed dentition. The use of miniscrew is the best alternative, even in younger patients. PMID:25992988

Metastatic neuroblastoma of the mandible: a cytogenetic and molecular genetic study.

PubMed

Manor, Esther; Kapelushnik, Joseph; Joshua, Ben-Zion; Bodner, Lipa

2012-08-01

Neuroblastoma (NB) jaw metastases are rare. Here, we report on cytogenetic and genetic studies on metastatic NB to the mandible. A 7-year-old boy, with an abdominal neuroblastoma, presented with a mass of the left body of the mandible. Cytogenetic analysis of the original tumor and the mandibular lesion biopsies revealed similar heterogenous subclones with 42 ~ 47,XY,+der(1)(q11 → qter),-2,del(7)(q21.1 → qter),-8,-9,-10,-11,del(11)(q13.3 → qter),-13,-14,-15,-17, + 18-18,der(18)(?),+21,+m1,+m2,+m3,+m4,+m5,+m6,+m7[cp25]. The different markers were identified by SKY analysis. Most of the cells carried 3-6 of these translocations: der(1;21), der(2;9;17), der(2;15;18), der(2;15;Y), der(8;10), der(10;17). Molecular examination using Neuroblastoma MLPA kit (MRC-Holland) revealed gain of 1q25, 1q42, 2q33, 2p23, 2p24 (N-myc), and 21q22, and loss of 11q22, 11q23, 17p13, and 17q11. FISH analysis using N-myc probe showed high amplification levels of N-myc. The cytogenetic and molecular genetic work-ups revealed that the mandibular lesion is a metastasis of the original abdominal tumor and not a second primary caused by the aggressive treatment. Clinical parameters such as : patient's age, site of primary tumor and the mandibular metastasis, together with poor prognosis genetic markers explain the patient's short-term survival.

A modified protocol for early treatment of osteomyelitis and osteoradionecrosis of the mandible.

PubMed

Aitasalo, K; Niinikoski, J; Grénman, R; Virolainen, E

1998-08-01

The treatment of osteoradionecrosis (ORN) and early chronic osteomyelitis (COM) of the mandible and maxilla is controversial. Hyperbaric oxygen (HBO) at two to three times the atmospheric pressure at sea level can result in tissue oxygen tension of almost 400 mmHg. Herewith HBO increases oxygen supply in hypoxic tissue, thus inducing fibroblastic proliferation and capillary formation. From 1981 to 1991, we used a monoplace chamber and since 1992, we have also had a multiplace chamber for HBO treatment. Hyperbaric oxygen was given at 2.5-2.8 atmosphere absolute pressure (ATA) for 90-120 minutes, once per day. The patients had five to 10 preoperative and five to seven postoperative sessions. Surgical therapy consisted of decortication of the affected bone, subsequently covered with a free periosteal transplant from the tibia. Thirty-six patients with ORN and 33 with COM of the mandible and maxilla was treated with this protocol. The median follow-up time in this material is 34 months, with a minimum of 10 months. Thirty-six ORN patients (92%) and 26 COM patients (79%) have remained symptom-free after the first treatment period. Three failed ORN patients were successfully treated with a free microvascular flap. The seven failed COM patients have been retreated, and five of them have occasional clinical symptoms. Hyperbaric oxygen is a promising adjunct to surgery in the treatment of mandibular and maxillary ORN and COM. Using this protocol, the necessary HBO treatment sessions have been reduced from earlier protocols, without adverse effect on the outcome.

Deciduous tooth chronology in the mandible of the domestic pig.

PubMed

Bivin, W S; McClure, R C

1976-01-01

Fetuses of known age, collected from 20 days' gestation to term, were used to characterize the chronology of deciduous tooth development within the right mandible of swine. Tooth development was first observed at 32 days' embryonic development, with the differentiation of the deciduous third molar. Bud stages for the remaining deciduous teeth differentiated within the period of 32 to 38 days of embryonic development. Although the initial histological appearance of these teeth covered a short period of time, it was apparent that each tooth continued to develop at its own rate. The deciduous second incisor and first molar reached a stage of enamel formation by the 80th and 86th day of fetal development. This is a much later stage than previously recorded for beginning enamel formation. The stages of tooth development and enamel formation for each tooth are summarized. A previous report on the distribution of the dental lamina and deciduous tooth development in the mandible of the domestic pig combined with the information presented in this report on tooth chronology provide much of the information required for future studies using the domestic pig in dental research. A fetus observed at the 74th day of development demonstrated a tooth bud for the deciduous first premolar. The development of this tooth was followed closely throughout the remainder of fetal development with the cap stage representing its most definitive form at 110 days' development. The suggested deciduous origin for this tooth could result in a reevaluation of the nomenclature for the dental formula of swine.

Effect of dietary calcium deficiency and altered diet hardness on the jawbone growth: A micro-CT and bone histomorphometric study in rats.

PubMed

Fujita, Yuko; Goto, Shota; Ichikawa, Maika; Hamaguchi, Ayako; Maki, Kenshi

2016-12-01

We examined the effects of a low-calcium diet and altered diet hardness on bone architecture and metabolism in the maxilla and mandible. Male rats (n=48, 3 weeks old) were divided into six groups. In total, 24 rats were given a normal-calcium diet and the others were given a low-calcium diet. Each group was then divided into three subgroups, which were fed a 'hard̕ diet for 8 weeks, a 'soft̕ die for 8 weeks, or switched from the soft diet after 4 weeks to the hard diet for 4 weeks. The bone architecture was analyzed using cephalometry and micro-computed tomography, in addition, the bone metabolism was analyzed using serum bone markers and bone histomorphometry in the maxilla and mandible. Moreover, the bone formation patterns were evaluated using histopathologically in the midpalatal suture. The low-calcium diet affected bone architecture by increasing bone turnover and the soft diet affected bone architecture mainly by increasing bone resorption. The soft diet changed the chondrocyte cell layers into fibrous connective tissues in the midpalatal suture. At 4 weeks after the return to a hard diet from a soft diet, recovery of the deterioration in bone architectures was seen in the maxilla and mandible. We demonstrated that mastication with a hard diet is effective for recovering the collapsed equilibrium of jaw bone turnover and the deteriorating jaw bone architectures due to the poor masticatory function during the growing period. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Effect of hypnosis on masseter EMG recorded during the 'resting' and a slightly open jaw posture.

PubMed

Al-Enaizan, N; Davey, K J; Lyons, M F; Cadden, S W

2015-11-01

The aim of this experimental study was to determine whether minimal levels of electromyographic activity in the masseter muscle are altered when individuals are in a verified hypnotic state. Experiments were performed on 17 volunteer subjects (8 male, 9 female) all of whom gave informed consent. The subjects were dentate and had no symptoms of pain or masticatory dysfunction. Surface electromyograms (EMGs) were made from the masseter muscles and quantified by integration following full-wave rectification and averaging. The EMGs were obtained (i) with the mandible in 'resting' posture; (ii) with the mandible voluntarily lowered (but with the lips closed); (iii) during maximum voluntary clenching (MVC). The first two recordings were made before, during and after the subjects were in a hypnotic state. Susceptibility to hypnosis was assessed with Spiegel's eye-roll test, and the existence of the hypnotic state was verified by changes in ventilatory pattern. On average, EMG levels expressed as percentages of MVC were less: (i) when the jaw was deliberately lowered as opposed to being in the postural position: (ii) during hypnosis compared with during the pre- and post-hypnotic periods. However, analysis of variance followed by post hoc tests with multiple comparison corrections (Bonferroni) revealed that only the differences between the level during hypnosis and those before and after hypnosis were statistically significant (P < 0·05). As the level of masseter EMG when the mandible was in 'resting' posture was reduced by hypnosis, it appears that part of that EMG is of biological origin. © 2015 John Wiley & Sons Ltd.

An in vivo evaluation of PLLA/PLLA-gHA nano-composite for internal fixation of mandibular bone fractures.

PubMed

Peng, Weihai; Zheng, Wei; Shi, Kai; Wang, Wangshu; Shao, Ying; Zhang, Duo

2015-11-09

Internal fixation of bone fractures using biodegradable poly(L-lactic-acid) (PLLA)-based materials has attracted the attention of many researchers. In the present study, 36 male beagle dogs were randomly assigned to two groups: PLLA/PLLA-gHA (PLLA-grafted hydroxyapatite) group and PLLA group. PLLA/PLLA-gHA and PLLA plates were embedded in the muscular bags of the erector spinae and also implanted to fix mandibular bone fractures in respective groups. At 1, 2, 3, 6, 9, and 12 months postoperatively, the PLLA/PLLA-gHA and PLLA plates were evaluated by adsorption and degradation tests, and the mandibles were examined through radiographic analysis, biomechanical testing, and histological analysis. The PLLA/PLLA-gHA plates were non-transparent and showed a creamy white color, and the PLLA plates were transparent and faint yellow in color. At all time points following surgery, adsorption and degradation of the PLLA/PLLA-gHA plates were significantly less than those of the PLLA plates, and the lateral and longitudinal bending strengths of the surgically treated mandibles of the beagle dogs in the PLLA/PLLA-gHA group were significantly greater than those of the PLLA group and reached almost the value of intact mandibles at 12 months postoperatively. Additionally, relatively rapid bone healing was observed in the PLLA/PLLA-gHA group with the formation of new lamellar bone tissues at 12 months after the surgery. The PLLA/PLLA-gHA nano-composite can be employed as a biodegradable material for internal fixation of mandibular bone fractures.

Influence of implant surface topography on bone-regenerative potential and mechanical retention in the human maxilla and mandible.

PubMed

Wei, Niu; Bin, Shi; Jing, Zhou; Wei, Sun; Yingqiong, Zhao

2014-06-01

To evaluate the short- and mid-term effects of commercial pure (cp) titanium implant surface topography on osseointegration, bone-regenerative potential and mechanical retention in the human maxilla and mandible. 32 micro-implants with the same geometry but with four different surface treatments were implanted in the maxilla and mandible of eight patients. Each patient received four micro-implants, one of each type. Percentage of bone-to-implant contact analysis and histological evaluation was carried 3, 6 and 12 weeks after implantation. Furthermore, reverse removal torque tests were conducted 3 and 6 weeks after implantation to analyze functional bone attachment. Implant surfaces tested were: machined, grit-blasted, acid-etched, and grit-blasted with acid-etch. One-way ANOVA was performed using the multiple comparison Fisher's test to determine significance of observed differences among test groups. The level of significance was established at 5% (P < 0.05). Mean and standard deviations of the test groups were calculated. Surface roughness had a significant correlation with the evolution of bone regeneration. The surfaces with roughness Ra approximately 4 microim (grit-blasted and grit-blasted with acid-etch), showed rapid tissue colonization compared to machine and acid-etched surfaces. The results of reverse removal torque tests confirmed a significant correlation between surface roughness and functional bone attachment. Grit-blasted and grit-blasted with acid etched surfaces showed higher retention values compared to machine and acid-etched implants. This finding was supported by higher bone-to-implant contact observed for rougher surfaces (grit-blasted and grit-blasted with acid etching).

Efficacy of cancellous block allograft augmentation prior to implant placement in the posterior atrophic mandible.

PubMed

Nissan, Joseph; Ghelfan, Oded; Mardinger, Ofer; Calderon, Shlomo; Chaushu, Gavriel

2011-12-01

The present study evaluated the outcome of ridge augmentation with cancellous freeze-dried block bone allografts in the posterior atrophic mandible followed by placement of dental implants. A bony deficiency of at least 3 mm, horizontally, vertically, or both, according to computerized tomography (CT) para-axial reconstruction served as inclusion criteria. Implants were inserted after a healing period of 6 months. Bone measurements were taken prior to bone augmentation, during implant placement, and at second-stage surgery. Marginal bone loss and crown-to-implant ratio were also measured. Twenty-nine cancellous allogeneic bone blocks were placed in 21 patients. The mean follow-up was 37 months. Bone block survival rate was 79.3%. Mean horizontal and vertical bone gains were 5.6 and 4.3 mm, respectively. Mean buccal bone resorption was 0.5 mm at implant placement and 0.2 mm at second-stage surgery. A total of 85 implants were placed. Mean bone thickness buccal to the implant neck was 2.5 mm at implant placement and 2.3 mm at second-stage surgery. There was no evidence of vertical bone loss between implant placement and second-stage surgery. Implant survival rate was 95.3%. All patients received a fixed implant-supported prosthesis. At the last follow-up, the mean marginal bone loss was 0.5 mm. The mean crown-to-implant ratio was 0.96. Implant placement in the posterior atrophic mandible following augmentation with cancellous freeze-dried bone block allografts may be regarded as a viable treatment alternative. © 2009 Wiley Periodicals, Inc.

A worldwide comparison of the management of surgical treatment of advanced oral cancer.

PubMed

Kansy, Katinka; Mueller, Andreas Albert; Mücke, Thomas; Koersgen, Friederike; Wolff, Klaus Dietrich; Zeilhofer, Hans-Florian; Hölzle, Frank; Pradel, Winnie; Schneider, Matthias; Kolk, Andreas; Smeets, Ralf; Acero, Julio; Haers, Piet; Ghali, G E; Hoffmann, Jürgen

2018-03-01

Microvascular surgery following tumor resection has become an important field of oral and maxillofacial surgery (OMFS). Following the results from management of T1/T2 floor-of-mouth and tongue squamous cell carcinoma (SCC) in German-speaking countries, Europe, and worldwide, this paper presents specific concepts for the management of resection and reconstruction of T3/T4 SCC of the maxillary and mandibular alveolar process and tongue. The DÖSAK questionnaire was distributed in three different phases to a growing number of maxillofacial units worldwide. Within this survey, clinical patient settings were presented to participants and center-specific treatment strategies were evaluated. A total of 188 OMFS units from 36 different countries documented their treatment strategies for T3/T4 maxillary and mandibular alveolar process and tongue SCC. The extent of surgical resections and subsequent reconstructions is more consistent than with T1/T2 tumors, although the controversy surrounding continuity resections and mandible-sparing procedures remains. For continuity resection of the mandible the fibula free flap is the most frequently used bone replacement, whereas maxilla reconstruction concepts are less consistent, ranging from locoregional coverage concepts and different microvascular reconstruction options to treatment via obturator prosthesis. Results from treatment strategies for T3/T4 tumors underline the limited evidence for the appropriate amount of resection and subsequent reconstruction process, especially in cases involving the mandible. Prospective randomized trials will be necessary in the long term to establish valid treatment guidelines. Copyright © 2018 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Congenital muscle dystrophy and diet consistency affect mouse skull shape differently.

PubMed

Spassov, Alexander; Toro-Ibacache, Viviana; Krautwald, Mirjam; Brinkmeier, Heinrich; Kupczik, Kornelius

2017-11-01

The bones of the mammalian skull respond plastically to changes in masticatory function. However, the extent to which muscle function affects the growth and development of the skull, whose regions have different maturity patterns, remains unclear. Using muscle dissection and 3D landmark-based geometric morphometrics we investigated the effect of changes in muscle function established either before or after weaning, on skull shape and muscle mass in adult mice. We compared temporalis and masseter mass and skull shape in mice with a congenital muscle dystrophy (mdx) and wild type (wt) mice fed on either a hard or a soft diet. We found that dystrophy and diet have distinct effects on the morphology of the skull and the masticatory muscles. Mdx mice show a flattened neurocranium with a more dorsally displaced foramen magnum and an anteriorly placed mandibular condyle compared with wt mice. Compared with hard diet mice, soft diet mice had lower masseter mass and a face with more gracile features as well as labially inclined incisors, suggesting reduced bite strength. Thus, while the early-maturing neurocranium and the posterior portion of the mandible are affected by the congenital dystrophy, the late-maturing face including the anterior part of the mandible responds to dietary differences irrespective of the mdx mutation. Our study confirms a hierarchical, tripartite organisation of the skull (comprising neurocranium, face and mandible) with a modular division based on development and function. Moreover, we provide further experimental evidence that masticatory loading is one of the main environmental stimuli that generate craniofacial variation. © 2017 Anatomical Society.