Sample records for manufacturing program update

  1. Lighting Equipment (Update to Listing)

    DOT National Transportation Integrated Search

    1996-05-06

    This listing contains equipment and manufacturers certified or deleted since publication of advisory circular 150/5345-53A, Airport lighting equipment certification program, on 5-15-95. The equipment and manufacturers will be added to or deleted from...

  2. Manufacturing Methods and Technology Program Plan. Update.

    DTIC Science & Technology

    1981-11-01

    INDUSTRIAL BASE ENGINEERING ACTIVITY ROCK ISLAND. ILLINOIS 61299 82 INDEX PAGE I. INTRODUCTION The MMT Program Plan Update ........... 1 Industry Guide...obtained from that Plan, extra copies of which are available upon request from the Industrial Base Engineering Activity. Other sources for this data are...Major Subcommands (SUBMACOM’S). The SUBMACOM’S plan, formulate, budget, and execute individual projects. The Industrial Base Engineering Activity

  3. Exhaust Emission Rates for Heavy-Duty On road Vehicles in MOVES201X

    EPA Science Inventory

    Updated running exhaust gaseous emission rates (THC, CO, NOx, CO2) for heavy-duty diesel trucks model year 2010 and later based on portable emission measurements from the manufacturer-run, heavy-duty in-use testing (HDIUT) program. Updated cold start emission rates and soak adjus...

  4. Air Force Ni-Cd cell qualification program update

    NASA Technical Reports Server (NTRS)

    Hall, Steve; Brown, Harry; Collins, G.; Hwang, W.; Bui, Q.

    1993-01-01

    The generic qualification of aerospace nickel-cadmium cells is discussed. The test program includes the following: all available manufacturers, all available designs, cells from the previous program, and high and low orbit life cycling. It is the purpose of this program to characterize the beginning of life performance.

  5. Preparing for High Technology: Model Programs in the USA. Research and Development Series No. 258.

    ERIC Educational Resources Information Center

    Doty, Charles R.

    This publication identifies exemplary programs and human resources in the automated manufacturing technologies. Its purpose is to assist vocational education program planners and curriculum specialists in updating programs and staff skills to prepare for high technology. Chapter 1 is an introduction. Chapter 2 describes the seven U.S. Secretary of…

  6. NASTRAN computer system level 12.1

    NASA Technical Reports Server (NTRS)

    Butler, T. G.

    1971-01-01

    Program uses finite element displacement method for solving linear response of large, three-dimensional structures subject to static, dynamic, thermal, and random loadings. Program adapts to computers of different manufacture, permits up-dating and extention, allows interchange of output and input information between users, and is extensively documented.

  7. Polycrystalline silicon material availability and market pricing outlook study for 1980 to 88: January 1983 update

    NASA Technical Reports Server (NTRS)

    Costogue, E.; Pellin, R.

    1983-01-01

    Photovoltaic solar cell arrays which convert solar energy into electrical energy can become a cost effective, alternative energy source provided that an adequate supply of low priced materials and automated fabrication techniques are available. Presently, silicon is the most promising cell material for achieving the near term cost goals of the Photovoltaics Program. Electronic grade silicon is produced primarily for the semiconductor industry with the photovoltaic industry using, in most cases, the production rejects of slightly lower grade material. Therefore, the future availability of adequate supplies of low cost silicon is one of the major concerns of the Photovoltaic Program. The supply outlook for silicon with emphasis on pricing is updated and is based primarily on an industry survey conducted by a JPL consultant. This survey included interviews with polycrystalline silicon manufacturers, a large cross section of silicon users and silicon solar cell manufacturers.

  8. Project GOLD: Growth Opportunities through Learning & Doing, Performance Reporting Period, November 1, 1996-February 28, 1998. National Workplace Literacy Program.

    ERIC Educational Resources Information Center

    Seminole Community Coll., Sanford, FL.

    Project "Growth Opportunities through Learning and Doing" (GOLD), Seminole Community College's basic skills update program, enrolled 107 students at 2 manufacturing facilities from April 1995-February 1998. Employees from Siemens Telecom Network (formerly known as Siemens Stromberg-Carlson) studied offsite in a classroom equipped with 10 computers…

  9. Rural development update for South Africa

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Arent, D.

    1997-12-01

    This paper describes renewable energy programs implemented in South Africa as part of a collaborative program for rural development. Different facets of this program include: Renewable Energy for South Africa (REFSA); hybrid collaborative R&D; electricity sector restructuring; provincial level initiation of renewable energy applications; renewable energy for African development (REFAD); and Suncorp photovoltaic manufacturing company. Limited detailed information is provided on the activities of each of these different program facets over the past year in particular.

  10. Airborne Wind Shear Detection and Warning Systems: Fourth Combined Manufacturers' and Technologists' Conference, part 1

    NASA Technical Reports Server (NTRS)

    Vicroy, Dan D. (Compiler); Bowles, Roland L. (Compiler); Passman, Robert H. (Compiler)

    1992-01-01

    The purpose of the meeting was to transfer significant ongoing results of the NASA/FAA joint Airborne Wind Shear Program to the technical industry and to pose problems of current concern to the combined group. It also provided a forum for manufacturers to review forward-look technology concepts and for technologists to gain an understanding of the problems encountered by the manufacturers during the development of airborne equipment and the FAA certification requirements. The present document was compiled to record the essence of the technology updates and discussions which follow each.

  11. Design, fabrication, test, qualification and price analysis for third generation design solar cell modules

    NASA Technical Reports Server (NTRS)

    1980-01-01

    An updated program plan is presented showing the task descriptions depicting the work, progress, achievements, and the cause of any deviations from the original plan (SC-1), and how this impacted on the original schedule of the program. In addition there is an update documenting all design alterations made during the pre-production phase and a complete up to date set of engineering and manufacturing documentation (CM-1). The purpose of the work in the original plan was to explore, design, develop, test, and deliver 1000 watts of prototype flat plate, photovoltaic modules appropriate for use in applications in the 20 to 500 kilowatt range and which show potential for meeting the 1986 cost goals.

  12. An update on the Department of Energy's photovoltaic program

    NASA Technical Reports Server (NTRS)

    Benner, John P.; Fitzgerald, Mark

    1994-01-01

    Funding for the terrestrial photovoltaic's program is $78 million in 1994. This is more than double the minimum level reached in 1989 and runs counter to the general trend of decreasing budgets for Department of Energy (DOE) programs. During the past five years, the program has expanded its mission from research and development to also address manufacturing technology and commercialization assistance. These new activities are directed toward revitalizing the market to reinstate the rapid rate of sales growth needed to attract investment. The program is approaching balance among efforts in each of the three areas. This translates to a reduction in some of the R & D activities of most relevance to the space power community. On the other hand, some of the advancements in manufacturing may finally bring thin-film technologies to reality for space arrays. This talk will describe the status and direction of DOE program with an eye toward highlighting its impact on technology of interest for space.

  13. Advanced manufacturing development of a composite empennage component for L-1011 aircraft

    NASA Technical Reports Server (NTRS)

    Alva, T.; Henkel, J.; Johnson, R.; Carll, B.; Jackson, A.; Mosesian, B.; Brozovic, R.; Obrien, R.; Eudaily, R.

    1982-01-01

    This is the final report of technical work conducted during the fourth phase of a multiphase program having the objective of the design, development and flight evaluation of an advanced composite empennage component manufactured in a production environment at a cost competitive with those of its metal counterpart, and at a weight savings of at least 20 percent. The empennage component selected for this program is the vertical fin box of the L-1011 aircraft. The box structure extends from the fuselage production joint to the tip rib and includes front and rear spars. During Phase 4 of the program, production quality tooling was designed and manufactured to produce three sets of covers, ribs, spars, miscellaneous parts, and subassemblies to assemble three complete ACVF units. Recurring and nonrecurring cost data were compiled and documented in the updated producibility/design to cost plan. Nondestruct inspections, quality control tests, and quality acceptance tests were performed in accordance with the quality assurance plan and the structural integrity control plan. Records were maintained to provide traceability of material and parts throughout the manufacturing development phase. It was also determined that additional tooling would not be required to support the current and projected L-1011 production rate.

  14. Airborne Wind Shear Detection and Warning Systems. Fourth Combined Manufacturers' and Technologists' Conference, part 2

    NASA Technical Reports Server (NTRS)

    Vicroy, Dan D. (Compiler); Bowles, Roland L. (Compiler); Passman, Robert H. (Compiler)

    1992-01-01

    The Fourth Combined Manufacturers' and Technologists' Conference was hosted jointly by NASA Langley Research Center (LaRC) and the Federal Aviation Administration (FAA) in Williamsburg, Virginia, on April 14-16, 1992. The meeting was co-chaired by Dr. Roland Bowles of LaRC and Bob Passman of the FAA. The purpose of the meeting was to transfer significant ongoing results of the NASA/FAA Joint Airborne Wind Shear Program to the technical industry and to pose problems of current concern to the combined group. It also provided a forum for manufacturers to review forward-look technology concepts and for technologists to gain an understanding of the problems encountered by the manufacturers during the development of airborne equipment and the FAA certification requirements. The present document has been compiled to record the essence of the technology updates and discussions which follow each.

  15. National Emission Standards for Aerospace Manufacturing and Rework Facilities: Summary of Requirements for Implementing the National Emission Standards for Hazardous Air Pollutants (NESHAP)

    EPA Pesticide Factsheets

    This summary of implementation requirements document for the Aerospace Manufacturing and Rework facilties NESHAP was originally prepared in August 1997, but it was updated in January 2001 with a new amendments update.

  16. Obtaining manufactured geometries of deep-drawn components through a model updating procedure using geometric shape parameters

    NASA Astrophysics Data System (ADS)

    Balla, Vamsi Krishna; Coox, Laurens; Deckers, Elke; Plyumers, Bert; Desmet, Wim; Marudachalam, Kannan

    2018-01-01

    The vibration response of a component or system can be predicted using the finite element method after ensuring numerical models represent realistic behaviour of the actual system under study. One of the methods to build high-fidelity finite element models is through a model updating procedure. In this work, a novel model updating method of deep-drawn components is demonstrated. Since the component is manufactured with a high draw ratio, significant deviations in both profile and thickness distributions occurred in the manufacturing process. A conventional model updating, involving Young's modulus, density and damping ratios, does not lead to a satisfactory match between simulated and experimental results. Hence a new model updating process is proposed, where geometry shape variables are incorporated, by carrying out morphing of the finite element model. This morphing process imitates the changes that occurred during the deep drawing process. An optimization procedure that uses the Global Response Surface Method (GRSM) algorithm to maximize diagonal terms of the Modal Assurance Criterion (MAC) matrix is presented. This optimization results in a more accurate finite element model. The advantage of the proposed methodology is that the CAD surface of the updated finite element model can be readily obtained after optimization. This CAD model can be used for carrying out analysis, as it represents the manufactured part more accurately. Hence, simulations performed using this updated model with an accurate geometry, will therefore yield more reliable results.

  17. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wheeler, D.; Ulsh, M.

    In 2008, the National Renewable Energy Laboratory (NREL), under contract to the US Department of Energy (DOE), conducted a manufacturing readiness assessment (MRA) of fuel cell systems and fuel cell stacks for back-up power and material handling applications (MHE). To facilitate the MRA, manufacturing readiness levels (MRL) were defined that were based on the Technology Readiness Levels previously established by the US Department of Energy (DOE). NREL assessed the extensive existing hierarchy of MRLs developed by Department of Defense (DoD) and other Federal entities, and developed a MRL scale adapted to the needs of the Fuel Cell Technologies Program (FCTP)more » and to the status of the fuel cell industry. The MRL ranking of a fuel cell manufacturing facility increases as the manufacturing capability transitions from laboratory prototype development through Low Rate Initial Production to Full Rate Production. DOE can use MRLs to address the economic and institutional risks associated with a ramp-up in polymer electrolyte membrane (PEM) fuel cell production. In 2010, NREL updated this assessment, including additional manufacturers, an assessment of market developments since the original report, and a comparison of MRLs between 2008 and 2010.« less

  18. Proceedings of the IMOG (Interagency Manufacturing Operations Group) Numerical Systems Group. 62nd Meeting

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Maes, G.J.

    1993-10-01

    This document contains the proceedings of the 62nd Interagency Manufacturing Operations Group (IMOG) Numerical Systems Group. Included are the minutes of the 61st meeting and the agenda for the 62nd meeting. Presentations at the meeting are provided in the appendices to this document. Presentations were: 1992 NSG Annual Report to IMOG Steering Committee; Charter for the IMOG Numerical Systems Group; Y-12 Coordinate Measuring Machine Training Project; IBH NC Controller; Automatically Programmed Metrology Update; Certification of Anvil-5000 for Production Use at the Y-12 Plant; Accord Project; Sandia National Laboratories {open_quotes}Accord{close_quotes}; Demo/Anvil Tool Path Generation 5-Axis; Demo/Video Machine/Robot Animation Dynamics; Demo/Certification ofmore » Anvil Tool Path Generation; Tour of the M-60 Inspection Machine; Distributed Numerical Control Certification; Spline Usage Method; Y-12 NC Engineering Status; and Y-12 Manufacturing CAD Systems.« less

  19. First incremental buy for Increment 2 of the Space Transportation System (STS)

    NASA Technical Reports Server (NTRS)

    1989-01-01

    Thiokol manufactured and delivered 9 flight motors to KSC on schedule. All test flights were successful. All spent SRMs were recovered. Design, development, manufacture, and delivery of required transportation, handling, and checkout equipment to MSFC and to KSC were completed on schedule. All items of data required by DPD 400 were prepared and delivered as directed. In the system requirements and analysis area, the point of departure from Buy 1 to the operational phase was developed in significant detail with a complete set of transition documentation available. The documentation prepared during the Buy 1 program was maintained and updated where required. The following flight support activities should be continued through other production programs: as-built materials usage tracking on all flight hardware; mass properties reporting for all flight hardware until sample size is large enough to verify that the weight limit requirements were met; ballistic predictions and postflight performance assessments for all production flights; and recovered SRM hardware inspection and anomaly identification. In the safety, reliability, and quality assurance area, activities accomplished were assurance oriented in nature and specifically formulated to prevent problems and hardware failures. The flight program to date has adequately demonstrated the success of this assurance approach. The attention focused on details of design, analysis, manufacture, and inspection to assure the production of high-quality hardware has resulted in the absence of flight failures. The few anomalies which did occur were evaluated, design or manufacturing changes incorporated, and corrective actions taken to preclude recurrence.

  20. U-10Mo Baseline Fuel Fabrication Process Description

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hubbard, Lance R.; Arendt, Christina L.; Dye, Daniel F.

    This document provides a description of the U.S. High Power Research Reactor (USHPRR) low-enriched uranium (LEU) fuel fabrication process. This document is intended to be used in conjunction with the baseline process flow diagram (PFD) presented in Appendix A. The baseline PFD is used to document the fabrication process, communicate gaps in technology or manufacturing capabilities, convey alternatives under consideration, and as the basis for a dynamic simulation model of the fabrication process. The simulation model allows for the assessment of production rates, costs, and manufacturing requirements (manpower, fabrication space, numbers and types of equipment, etc.) throughout the lifecycle ofmore » the USHPRR program. This document, along with the accompanying PFD, is updated regularly« less

  1. Testing Update on 20 and 25-Ah Lithium Ion Cells

    NASA Technical Reports Server (NTRS)

    Bruce, Gregg C.; Mardikian, Pamella; Edwards, Sherri; Bugga, Kumar; Chin, Keith; Smart, Marshall; Surampudi, Subbarao

    2003-01-01

    Eagle-Picher Energy Products has worked on lithium ion batteries for approximately 8 years. During that period EPEPC developed and delivered several cell sizes on a program funded by the USAF and Canadian DND. Designs are wound cylindrical cells from 7 to 40-Ah. Most cells delivered were approximately 25-Ah due to requirements of Mars missions. Several iterations of cells were manufactured and delivered for evaluation. The first design was 20-Ah, Design I, and the second was a 25-Ah, Design II.

  2. 76 FR 22817 - Approval and Promulgation of Air Quality Implementation Plans; South Carolina; Update to...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-25

    ... Manufacturing'' 5. ``Section VI--Hot Mix Asphalt Manufacturing'' 6. ``Section VII--Metal Refining;'' [[Page... Industries 1. ``Section III--Kraft Pulp and Paper Manufacturing Plants'' 2. ``Section VI--Hot Mix Asphalt... Manufacturing'' 3. ``Section XI--Total Reduced Sulfur Emissions of Kraft Pulp Mills;'' viii. Regulation 62.5...

  3. 21 CFR 607.30 - Updating blood product listing information.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Updating blood product listing information. 607.30... (CONTINUED) BIOLOGICS ESTABLISHMENT REGISTRATION AND PRODUCT LISTING FOR MANUFACTURERS OF HUMAN BLOOD AND BLOOD PRODUCTS Procedures for Domestic Blood Product Establishments § 607.30 Updating blood product...

  4. 21 CFR 607.30 - Updating blood product listing information.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 7 2012-04-01 2012-04-01 false Updating blood product listing information. 607.30... (CONTINUED) BIOLOGICS ESTABLISHMENT REGISTRATION AND PRODUCT LISTING FOR MANUFACTURERS OF HUMAN BLOOD AND BLOOD PRODUCTS Procedures for Domestic Blood Product Establishments § 607.30 Updating blood product...

  5. 21 CFR 607.30 - Updating blood product listing information.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 7 2013-04-01 2013-04-01 false Updating blood product listing information. 607.30... (CONTINUED) BIOLOGICS ESTABLISHMENT REGISTRATION AND PRODUCT LISTING FOR MANUFACTURERS OF HUMAN BLOOD AND BLOOD PRODUCTS Procedures for Domestic Blood Product Establishments § 607.30 Updating blood product...

  6. 21 CFR 607.30 - Updating blood product listing information.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 7 2014-04-01 2014-04-01 false Updating blood product listing information. 607.30... (CONTINUED) BIOLOGICS ESTABLISHMENT REGISTRATION AND PRODUCT LISTING FOR MANUFACTURERS OF HUMAN BLOOD AND BLOOD PRODUCTS Procedures for Domestic Blood Product Establishments § 607.30 Updating blood product...

  7. 21 CFR 607.30 - Updating blood product listing information.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 7 2011-04-01 2010-04-01 true Updating blood product listing information. 607.30... (CONTINUED) BIOLOGICS ESTABLISHMENT REGISTRATION AND PRODUCT LISTING FOR MANUFACTURERS OF HUMAN BLOOD AND BLOOD PRODUCTS Procedures for Domestic Blood Product Establishments § 607.30 Updating blood product...

  8. Next Generation Electromagnetic Pump Analysis Tools (PLM DOC-0005-2188). Final Report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stregy, Seth; Dasilva, Ana; Yilmaz, Serkan

    2015-10-29

    This report provides the broad historical review of EM Pump development and details of MATRIX development under this project. This report summarizes the efforts made to modernize the legacy performance models used in previous EM Pump designs and the improvements made to the analysis tools. This report provides information on Tasks 1, 3, and 4 of the entire project. The research for Task 4 builds upon Task 1: Update EM Pump Databank and Task 3: Modernize the Existing EM Pump Analysis Model, which are summarized within this report. Where research for Task 2: Insulation Materials Development and Evaluation identified parametersmore » applicable to the analysis model with Task 4, the analysis code was updated, and analyses were made for additional materials. The important design variables for the manufacture and operation of an EM Pump that the model improvement can evaluate are: space constraints; voltage capability of insulation system; maximum flux density through iron; flow rate and outlet pressure; efficiency and manufacturability. The development of the next-generation EM Pump analysis tools during this two-year program provides information in three broad areas: Status of analysis model development; Improvements made to older simulations; and Comparison to experimental data.« less

  9. DORIS Starec ground antenna characterization and impact on positioning

    NASA Astrophysics Data System (ADS)

    Tourain, C.; Moreaux, G.; Auriol, A.; Saunier, J.

    2016-12-01

    In a geodetic radio frequency observing system the phase center offsets and phase center variations of ground antennae are a fundamental component of mathematical models of the system observables. In this paper we describe work aimed at improving the DORIS Starec ground antenna phase center definition model. Seven antennas were analyzed in the Compact Antenna Test Range (CATR), a dedicated CNES facility. With respect to the manufacturer specified phase center offset, the measured antennae varied between -6 mm and +4 mm due to manufacturing variations. To solve this problem, discussions were held with the manufacturer, leading to an improvement of the manufacturing process. This work results in a reduction in the scatter to ±1 mm. The phase center position has been kept unchanged and associated phase law has been updated and provided to users of the International DORIS Service (IDS). This phase law is applicable to all Starec antennas (before and after manufacturing process consolidation) and is azimuth independent. An error budget taking into account these updated characteristics has been established for the antenna alone: ±2 mm on the horizontal plane and ±3 mm on the up component, maximum error values for antennas named type C (Saunier et al., 2016) produced with consolidated manufacturing process. Finally the impact of this updated characterization on positioning results has been analyzed and shows a scale offset only of the order of +12 mm for the Terrestrial Reference Frame.

  10. Towards Knowledge Management for Smart Manufacturing.

    PubMed

    Feng, Shaw C; Bernstein, William Z; Hedberg, Thomas; Feeney, Allison Barnard

    2017-09-01

    The need for capturing knowledge in the digital form in design, process planning, production, and inspection has increasingly become an issue in manufacturing industries as the variety and complexity of product lifecycle applications increase. Both knowledge and data need to be well managed for quality assurance, lifecycle-impact assessment, and design improvement. Some technical barriers exist today that inhibit industry from fully utilizing design, planning, processing, and inspection knowledge. The primary barrier is a lack of a well-accepted mechanism that enables users to integrate data and knowledge. This paper prescribes knowledge management to address a lack of mechanisms for integrating, sharing, and updating domain-specific knowledge in smart manufacturing. Aspects of the knowledge constructs include conceptual design, detailed design, process planning, material property, production, and inspection. The main contribution of this paper is to provide a methodology on what knowledge manufacturing organizations access, update, and archive in the context of smart manufacturing. The case study in this paper provides some example knowledge objects to enable smart manufacturing.

  11. 40 CFR 53.9 - Conditions of designation.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... continue to do so only so long as updates of the Product Manufacturing Checklist set forth in subpart E of this part are submitted annually. In the event that an annual Checklist update is not received by EPA within 12 months of the date of the last such submitted Checklist or Checklist update, EPA shall notify...

  12. 40 CFR 53.9 - Conditions of designation.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... FEM may continue to do so only so long as updates of the Product Manufacturing Checklist set forth in subpart E of this part are submitted annually. In the event that an annual Checklist update is not received by EPA within 12 months of the date of the last such submitted Checklist or Checklist update, EPA...

  13. 40 CFR 53.9 - Conditions of designation.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... FEM may continue to do so only so long as updates of the Product Manufacturing Checklist set forth in subpart E of this part are submitted annually. In the event that an annual Checklist update is not received by EPA within 12 months of the date of the last such submitted Checklist or Checklist update, EPA...

  14. Japan's launch vehicle program update

    NASA Astrophysics Data System (ADS)

    Tadakawa, Tsuguo

    1987-06-01

    NASDA is actively engaged in the development of H-I and H-II launch vehicle performance capabilities in anticipation of future mission requirements. The H-I has both two-stage and three-stage versions for medium-altitude and geosynchronous orbits, respectively; the restart capability of the second stage affords considerable mission planning flexibility. The H-II vehicle is a two-stage liquid rocket primary propulsion design employing two solid rocket boosters for secondary power; it is capable of launching two-ton satellites into geosynchronous orbit, and reduces manufacture and launch costs by extensively employing off-the-shelf technology.

  15. Nickel-hydrogen CPV battery update

    NASA Technical Reports Server (NTRS)

    Jones, Kenneth R.; Zagrodnik, Jeffrey P.

    1993-01-01

    The multicell common pressure vessel (CPV) nickel hydrogen battery manufactured by Johnson Controls Battery Group, Inc. has completed full flight qualification, including random vibration at 19.5 g for two minutes in each axis, electrical characterization in a thermal vacuum chamber, and mass-spectroscopy vessel leak detection. A first launch is scheduled for late in 1992 or early 1993 by the Naval Research Laboratory (NRL). Specifics of the launch date are not available at this time due to the classified nature of the program. Release of orbital data for the battery is anticipated following the launch.

  16. 77 FR 10662 - Guidance for Industry: Questions and Answers Regarding Establishment and Maintenance of Records...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-23

    ... Records by Persons Who Manufacture, Process, Pack, Transport, Distribute, Receive, Hold, or Import Food... ``Questions and Answers Regarding Establishment and Maintenance of Records by Persons Who Manufacture, Process... updated information pertaining to the establishment and maintenance of records by persons who manufacture...

  17. Automotive Manufacturers' Cost/Revenue, Financial and Risk Analysis : Projected Impact of Automobile Manufacturing on the Plastics Industry

    DOT National Transportation Integrated Search

    1979-08-01

    The report is part of a study to update the historical and projected cost/revenue analysis of the U.S. domestic automobile manufacturers. It includes the evaluation of the historical and projected financial data to assess the corporate financial posi...

  18. Haemovigilance: A Current Update in Indian Perspective

    PubMed Central

    Mukherjee, Somnath

    2016-01-01

    Haemovigilance is an organised scheme of monitoring, identifying, reporting, investigating and analysing adverse events and reactions pertinent to transfusion and manufacturing blood products. This system is also an elemental part of quality control in a blood system, bringing about corrective and preventive measures, and for the perpetual advancement of the quality and safety of blood products and the transfusion process. Nowadays haemovigilance setups have been enforced throughout the globe in most developed countries, to monitor the adverse reactions and episodes associated with blood donations and transfusions. Indian Pharmacopoeia Commission has started a Haemovigilance Program of India (HvPI) in 2012 under its Pharmacovigilance Program of India (PvPI) in collaboration with National Institute of Biologicals, Noida, Uttar Pradesh, under Ministry of Health and Family welfare, Government of India with a primary objective to track adverse reactions/events and incidences associated with blood transfusion and blood product administration and to identify trends, recommend best practices and interventions required to improve patient care and safety. This review article is a detail update of current scenario of haemovigilance in India. PMID:28050389

  19. Partial Updating of TSCA Inventory DataBase; Production and Site Reports; Final Rule

    EPA Pesticide Factsheets

    A partial updating of the TSCA inventory database. The final rule requires manufacturers and importers of certain chemical substances included on the TSCA Chemical Substances Inventory to report current data on the production volume, plant site, etc.

  20. Tribal Colleges and Universitie/American Indian Higher Education Consortium Advanced Manufacturing Technical Assistance Project.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Atcitty, Stanley

    The National Nuclear Security Agency (NNSA) created a Minority Serving Institution Partnership Plan (MSIPP) to 1) align investments in a university capacity and workforce development with the NNSA mission to develop the needed skills and talent for NNSA’s enduring technical workforce at the laboratories and production plants and 2) to enhance research and education at under-represented colleges and universities. Out of this effort, MSIPP launched a new program in early FY17 focused on Tribal Colleges and Universities (TCUs). The following report summarizes the project focus and status update during this reporting period.

  1. Tribal Colleges and Universitie/American Indian Higher Education Consortium Advanced Manufacturing Technical Assistance Project

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Atcitty, Stanley

    The National Nuclear Security Agency (NNSA) created a Minority Serving Institution Partnership Plan (MSIPP) to 1) align investments in a university capacity and workforce development with the NNSA mission to develop the needed skills and talent for NNSA’s enduring technical workforce at the laboratories and production plants and 2) to enhance research and education at under-represented colleges and universities. Out of this effort, MSIPP launched a new program in early FY17 focused on Tribal Colleges and Universities (TCUs). The following report summarizes the project focus and status update during this reporting period.

  2. The US transit bus manufacturing industry [brief].

    DOT National Transportation Integrated Search

    2016-10-01

    Manufacturing buses for the US transit market has been a challenging business : over the last several decades. It is a small market with volatile demand. The : purpose of this report is to provide policy makers with an update on the state of the indu...

  3. 7/5nm logic manufacturing capabilities and requirements of metrology

    NASA Astrophysics Data System (ADS)

    Bunday, Benjamin; Bello, A. F.; Solecky, Eric; Vaid, Alok

    2018-03-01

    This paper will provide an update to previous works [2][4][9] to our view of the future for in-line high volume manufacturing (HVM) metrology for the semiconductor industry, concentrating on logic technology for foundries. First, we will review of the needs of patterned defect, critical dimensional (CD/3D), overlay and films metrology, and present the extensive list of applications for which metrology solutions are needed. We will then update the industry's progress towards addressing gating technical limits of the most important of these metrology solutions, highlighting key metrology technology gaps requiring industry attention and investment.

  4. 10 CFR 50.34 - Contents of applications; technical information.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... of ten. The manufacturing license will require the plant design to be updated no later than 5 years..., each applicant for a design certification, design approval, combined license, or manufacturing license... Section 50.34 Energy NUCLEAR REGULATORY COMMISSION DOMESTIC LICENSING OF PRODUCTION AND UTILIZATION...

  5. 75 FR 104 - Manufacturing & Services' Sustainable Manufacturing Initiative; Update

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-04

    ... with the private sector to determine the appropriate role of the federal government in establishing... publicize legislative and regulatory information and analyses that would enhance private sector... 20230 (or via the Internet at [email protected] ). FOR FURTHER INFORMATION CONTACT: William McElnea...

  6. Investigation of Coatings Which Prevent Molten Aluminum/Water Explosions

    NASA Astrophysics Data System (ADS)

    León, D. D.; Richter, R. T.; Levendusky, T. L.

    The Aluminum Association contracted Alcoa in 1995 to identify and test new protective coatings for casting pits as a replacement for Porter International's 7001 (Tarset Standard). Three new coatings have been identified through a series of selection criteria including: 1) A standardized splash test used to evaluate personal protective clothing, 2) An industry-standard molten metal explosion test, 3) A multiple-exposure test to measure durability, and 4) An external shock impact test. The results of this program will be reviewed. This study only tested protective coatings at the "in-service cure time", as defined by the manufacturer. These curing times can be excessive for a production casting facility. The Aluminum Association has contracted Alcoa in a second program to investigate the effect of reduced cure times on adhesion and their effectiveness in preventing molten metal/water explosions. A status update of this new two year program is provided.

  7. An updated methodology to review developing-country vaccine manufacturer viability.

    PubMed

    Luter, Nicholas; Kumar, Ritu; Hozumi, Dai; Lorenson, Tina; Larsen, Shannon; Gowda, Bhavya; Batson, Amie

    2017-07-05

    In 1997, Milstien, Batson, and Meaney published "A Systematic Method for Evaluating the Potential Viability of Local Vaccine Producers." The paper identified characteristics of successful vaccine manufacturers and developed a viability framework to evaluate their performance. This paper revisits the original study after two decades to determine the ability of the framework to predict manufacturer success. By reconstructing much of the original dataset and conducting in-depth interviews, the authors developed informed views on the continued viability of manufacturers in low- and middle-income country markets. Considering the marked changes in the market and technology landscape since 1997, the authors find the viability framework to be predictive and a useful lens through which to evaluate manufacturer success or failure. Of particular interest is how incumbent and potentially new developing-country vaccine manufacturers enter and sustain production in competitive international markets and how they integrate (or fail to integrate) new technology into the production process. Ultimately, most manufacturers will need to meet global quality standards to be viable. As governments and donors consider investments in vaccine producers, the updated viability factors will be a useful tool in evaluating the prospects of manufacturers over the mid to long term. The paper emphasizes that while up-front investments are important, other critical factors-including investments in a national regulatory authority, manufacturer independence, and ability to adapt and adopt new technology-are necessary to ensure viability. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

  8. Updating of the Curriculum for Industrial Refrigeration Course. Final Report.

    ERIC Educational Resources Information Center

    Eley, Robert H.

    A project was conducted at Wenatchee Valley College (Washington) to update the curriculum for the industrial refrigeration technician course. First, resource groups and information networks were contacted in order to obtain a wide range of available resources. In addition, contractors, manufacturers, and government agencies that serve the Pacific…

  9. Status of the NASA Balloon Program

    NASA Astrophysics Data System (ADS)

    Needleman, H. C.; Nock, R. S.; Bawcom, D. W.

    1993-02-01

    In the early 1980's the U.S. National Aeronautics and Space Administration (NASA) Balloon Program was faced with a problem of catastrophic balloon failures. In 1986 a balloon recovery program was initiated. This program included qualification of new balloon films, and investigations into materials, processing, structures and performance of balloons. This recovery program has been very successful. To date, more than 100 balloons manufactured of newly developed films have been flown with unprecedented success. There has been much progress made across the spectrum of balloon related disciplines. A new design philosophy has been developed and is being used for all NASA balloons. An updated balloon reliability and quality assurance program is in effect. The long duration balloon development project has been initiated with the first flight test having been conducted in December 1989 from Antarctica. A comprehensive research and development (R&D) effort has been initiated and is progressing well. The progress, status and future plans for these and other aspects of the NASA program, along with a description of the comprehensive balloon R&D activity, will be presented.

  10. Radiation Tests of Highly Scaled, High-Density, Commercial, Nonvolatile NAND Flash Memories - Update 2010

    NASA Technical Reports Server (NTRS)

    Irom, Farokh; Nguyen, Duc N.

    2010-01-01

    High-density, commercial, nonvolatile flash memories with NAND architecture are now available from several manufacturers. This report examines SEE effects and TID response in single-level cell (SLC) and multi-level cell (MLC) NAND flash memories manufactured by Micron Technology.

  11. NASA's Space Launch System Program Update

    NASA Technical Reports Server (NTRS)

    May, Todd; Lyles, Garry

    2015-01-01

    Hardware and software for the world's most powerful launch vehicle for exploration is being welded, assembled, and tested today in high bays, clean rooms and test stands across the United States. NASA's Space Launch System (SLS) continued to make significant progress in the past year, including firing tests of both main propulsion elements, manufacturing of flight hardware, and the program Critical Design Review (CDR). Developed with the goals of safety, affordability, and sustainability, SLS will deliver unmatched capability for human and robotic exploration. The initial Block 1 configuration will deliver more than 70 metric tons (t) (154,000 pounds) of payload to low Earth orbit (LEO). The evolved Block 2 design will deliver some 130 t (286,000 pounds) to LEO. Both designs offer enormous opportunity and flexibility for larger payloads, simplifying payload design as well as ground and on-orbit operations, shortening interplanetary transit times, and decreasing overall mission risk. Over the past year, every vehicle element has manufactured or tested hardware, including flight hardware for Exploration Mission 1 (EM-1). This paper will provide an overview of the progress made over the past year and provide a glimpse of upcoming milestones on the way to a 2018 launch readiness date.

  12. Radiation Tests of Highly scaled, High-Density, Commercial, Nonvolatile NAND Flash Memories--Update 2011

    NASA Technical Reports Server (NTRS)

    Irom, Farokh; Nguyen, Duc N.

    2011-01-01

    High-density, commercial, nonvolatile flash memories with NAND architecture are now available from several manufacturers. This report examines SEE effects and TID response in single-level cell (SLC) 32Gb and multi-level cell (MLC) 64Gb NAND flash memories manufactured by Micron Technology.

  13. 77 FR 55811 - Manufacturing Extension Partnership Advisory Board On-line Open Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-11

    ... Partnership Advisory Board On-line Open Meeting AGENCY: National Institute of Standards and Technology (NIST), Commerce ACTION: Notice of open meeting. SUMMARY: The National Institute of Standards and Technology (NIST... August 29, 2012, 2) an update on the NIST MEP FY 2013 budget, and 3) updates on changes to NIST MEP's...

  14. 75 FR 63832 - Agency Information Collection Activities; Submission for Office of Management and Budget Review...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-18

    ... requirements described in Sec. 211.100(b); and standard operating procedures should be reviewed and revised or..., and update. The draft guidance also encourages manufacturers to include a procedure in their Plan for... as which drug products will be manufactured under altered procedures, which products will have...

  15. A new estimate of the impact of OSHA inspections on manufacturing injury rates, 1998-2005.

    PubMed

    Haviland, Amelia M; Burns, Rachel M; Gray, Wayne B; Ruder, Teague; Mendeloff, John

    2012-11-01

    A prior study indicated that the effect of OSHA inspections on lost workday injuries had declined from 1979 through 1998. This study provides an updated estimate for 1998-2005. Injury data from the Pennsylvania workers' compensation program were linked with employment data from unemployment compensation records to calculate lost-time rates for single-establishment manufacturing firms with more than 10 employees. These rates were linked to OSHA inspection findings. The RAND Human Subjects Protection Committee determined that this study was exempt from review. Inspections with penalties reduced injuries by an average of 19-24% annually in the 2 years following the inspection. These effects were not found for workplaces with fewer than 20 or more than 250 employees or for inspections without penalties. These findings should be generalizable to the 29 states where federal OSHA directly enforces standards. They suggest that the impact of inspections has increased from the 1990s. Copyright © 2012 Wiley Periodicals, Inc.

  16. SAMICS: Input data preparation. [Solar Array Manufacturing Industry Costing Standards

    NASA Technical Reports Server (NTRS)

    Chamberlain, R. G.; Aster, R. W.

    1979-01-01

    The Solar Array Manufacturing Industry Costing Standards (SAMICS) provide standard formats, data, assumptions, and procedures for estimating the price that a manufacturer would have to charge for the product of a specified manufacturing process sequence. A line-by-line explanation is given of those standard formats which describe the economically important characteristics of the manufacturing processes and the technological structure of the companies and the industry. This revision provides an updated presentation of Format A Process Description, consistent with the October 1978 version of that form. A checklist of items which should be entered on Format A as direct expenses is included.

  17. Housing trends and impact on wood manufacturing

    Treesearch

    Matt Bumgardner; Urs Buehlmann; Al Schuler; Karen Koenig

    2013-01-01

    Demand from housing and other construction-related sectors continues to be an important issue for the secondary wood products industry. Conducted in early 2013, this fourth annual survey provides updated information on the status and actions of U.S. manufacturers affected by these industries. The study is a joint effort by Virginia Tech, the USDA Forest Service, and...

  18. Guidelines for the selection of chemical protective clothing. 1991 Update: Performance, availability, and sources of chemical protective clothing

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Johnson, J.S.; Schwope, A.D.; Goydan, R.

    1991-12-31

    The selection, acquisition, and use of chemical protective clothing (CPC) at Department of Energy (DOE) facilities require up-to-date data and information on the performance, availability, and sources of such clothing. There are hundreds of types and more than one hundred principal manufacturers of CPC. Information on CPC is published in manufacturers` brochures and the technical literature. These information sources, however, have no standard format or terminology for describing products or the results of product testing. Furthermore, the literature and information is continually changing and growing. Consequently, DOE`s industrial hygienists and safety specialists are frequently confounded in their efforts to providemore » effective CPC to workers, by they in the field, the laboratory, or the plant. In recognition of the many advances and changes that have occurred and of the need to provide current information to its health and safety staff, the DOE has updated and modified the key appendices of the Guidelines/Chemical Protective Clothing. The updates appendices compose the majority of this update document, wherein they are called Sections. Each Section begins with a description of its format, content, abbreviations, units, and links with other Sections, as appropriate.« less

  19. Technology utilization in a non-urban region: Further impact and technique of the Technology Use Studies Center, 2

    NASA Technical Reports Server (NTRS)

    Gold, H. C. (Editor); Moore, A. M.; Dodd, B.; Dittmar, V.

    1971-01-01

    The clientele served by the Technology Use Studies Center (TUSC) is updated. Manufacturing leads the list of client firms. The standard industrial classification (SIC) range of these firms is broad. Substantial numbers of college and university faculties are using TUSC services. Field operations inherent in the functions of dissemination and assistance are reviewed. Increasing emphasis among clientele is on environmental concerns and management. A record is provided of the institutions contacted and the extent of TUSC involvement with them, as well as TUSC's cooperation with agencies and organizations. The impact of TUSC and the NASA-sponsored Technology Utilization Program on other public agencies is discussed.

  20. Cleanups In My Community (CIMC) - Federal facilities that are also Superfund sites, National Layer

    EPA Pesticide Factsheets

    Federal facilities are properties owned by the federal government. This data layer provides access to Federal facilities that are Superfund sites as part of the CIMC web service. Data are collected using the Superfund Enterprise Management System (SEMS) and transferred to Envirofacts for access by the public. Data about Federal facility Superfund sites are located on their own EPA web pages, and CIMC links to those pages. Links to the relevant web pages for each site are provided within the attribute table. Federal facility sites can be either Superfund sites or RCRA Corrective Action sites, or they may have moved from one program to the other and back. In Cleanups in My Community, you can map or list any of these Federal Facility sites. This data layer shows only those facilities that are Superfund Sites. RCRA federal facility sites and other Superfund NPL sites are included in other data layers as part of this web service.Superfund is a program administered by the EPA to locate, investigate, and clean up worst hazardous waste sites throughout the United States. EPA administers the Superfund program in cooperation with individual states and tribal governments. These sites include abandoned warehouses, manufacturing facilities, processing plants, and landfills - the key word here being abandoned. The CIMC web service was initially published in 2013, but the data are updated on the 18th of each month. The full schedule for data updates in CIMC is located here:

  1. 77 FR 56631 - TRICARE, Formerly Known as the Civilian Health and Medical Program of the Uniformed Services...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-13

    ... Medical Program of the Uniformed Services; Fiscal Year 2013 Continued Health Care Benefit Program Premium Update AGENCY: Office of the Secretary, DoD. ACTION: Notice of updated continued health care benefit program premiums for fiscal year 2013. SUMMARY: This notice provides the updated Continued Health Care...

  2. 21 CFR 1271.21 - When do I register, submit an HCT/P list, and submit updates?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false When do I register, submit an HCT/P list, and... Listing § 1271.21 When do I register, submit an HCT/P list, and submit updates? (a) You must register and submit a list of every HCT/P that your establishment manufactures within 5 days after beginning...

  3. 21 CFR 1271.21 - When do I register, submit an HCT/P list, and submit updates?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false When do I register, submit an HCT/P list, and... Listing § 1271.21 When do I register, submit an HCT/P list, and submit updates? (a) You must register and submit a list of every HCT/P that your establishment manufactures within 5 days after beginning...

  4. 21 CFR 1271.21 - When do I register, submit an HCT/P list, and submit updates?

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false When do I register, submit an HCT/P list, and... Listing § 1271.21 When do I register, submit an HCT/P list, and submit updates? (a) You must register and submit a list of every HCT/P that your establishment manufactures within 5 days after beginning...

  5. Advanced Technology Composite Fuselage: Program Overview

    NASA Technical Reports Server (NTRS)

    Ilcewicz, L. B.; Smith, P. J.; Hanson, C. T.; Walker, T. H.; Metschan, S. L.; Mabson, G. E.; Wilden, K. S.; Flynn, B. W.; Scholz, D. B.; Polland, D. R.; hide

    1997-01-01

    The Advanced Technology Composite Aircraft Structures (ATCAS) program has studied transport fuselage structure with a large potential reduction in the total direct operating costs for wide-body commercial transports. The baseline fuselage section was divided into four 'quadrants', crown, keel, and sides, gaining the manufacturing cost advantage possible with larger panels. Key processes found to have savings potential include (1) skins laminated by automatic fiber placement, (2) braided frames using resin transfer molding, and (3) panel bond technology that minimized mechanical fastening. The cost and weight of the baseline fuselage barrel was updated to complete Phase B of the program. An assessment of the former, which included labor, material, and tooling costs, was performed with the help of design cost models. Crown, keel, and side quadrant cost distributions illustrate the importance of panel design configuration, area, and other structural details. Composite sandwich panel designs were found to have the greatest cost savings potential for most quadrants. Key technical findings are summarized as an introduction to the other contractor reports documenting Phase A and B work completed in functional areas. The current program status in resolving critical technical issues is also highlighted.

  6. Computer program CDCID: an automated quality control program using CDC update

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Singer, G.L.; Aguilar, F.

    1984-04-01

    A computer program, CDCID, has been developed in coordination with a quality control program to provide a highly automated method of documenting changes to computer codes at EG and G Idaho, Inc. The method uses the standard CDC UPDATE program in such a manner that updates and their associated documentation are easily made and retrieved in various formats. The method allows each card image of a source program to point to the document which describes it, who created the card, and when it was created. The method described is applicable to the quality control of computer programs in general. Themore » computer program described is executable only on CDC computing systems, but the program could be modified and applied to any computing system with an adequate updating program.« less

  7. 77 FR 64524 - Advisory Committee on Infant Mortality; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-22

    ... the Healthy Start Program and Healthy People 2020 infant mortality objectives. Agenda: Topics that will be discussed include the following: HRSA Update; Maternal and Child Health Bureau Update; Healthy Start Program Update; Updates from Partnering Agencies and Organizations; and ACIM's recommendations for...

  8. 78 FR 54863 - Bureau of the Census Geographically Updated Population Certification Program (GUPCP)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-06

    ... Geographically Updated Population Certification Program (GUPCP) AGENCY: Bureau of the Census, Department of... Census (Census Bureau) will resume processing applications for certified decennial census population and... Updated Population Certification Program (GUPCP), was suspended on January 1, 2008, to accommodate the...

  9. Soil Fumigant Labels - Dazomet

    EPA Pesticide Factsheets

    Updated labels include new safety requirements for buffer zones and related measures. Find information from the Pesticide Product Labeling System (PPLS) for products such as Basamid G, manufactured by Amvac.

  10. Practical 3D Printing of Antennas and RF Electronics

    DTIC Science & Technology

    2017-03-01

    Passive RF; Combiners Introduction Additive manufacturing can reduce the time and material costs in a design cycle and enable the on-demand printing of...performance, and create Computer Assisted Manufacturing (CAM) files. By intelligently leveraging this process, the design can be readily updated or...advances in 3D printing technology now enable antennas and RF electronics to be designed and prototyped significantly faster than conventional

  11. 21 CFR 803.56 - If I am a manufacturer, in what circumstances must I submit a supplemental or followup report and...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... that you did not provide because it was not known or was not available when you submitted the initial... report that you are updating with the supplemental information (e.g., your original manufacturer report number and the user facility or importer report number of any report on which your report was based), if...

  12. 21 CFR 803.56 - If I am a manufacturer, in what circumstances must I submit a supplemental or followup report and...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... that you did not provide because it was not known or was not available when you submitted the initial... report that you are updating with the supplemental information (e.g., your original manufacturer report number and the user facility or importer report number of any report on which your report was based), if...

  13. 21 CFR 803.56 - If I am a manufacturer, in what circumstances must I submit a supplemental or followup report and...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... that you did not provide because it was not known or was not available when you submitted the initial... report that you are updating with the supplemental information (e.g., your original manufacturer report number and the user facility or importer report number of any report on which your report was based), if...

  14. 21 CFR 803.56 - If I am a manufacturer, in what circumstances must I submit a supplemental or followup report and...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... that you did not provide because it was not known or was not available when you submitted the initial... report that you are updating with the supplemental information (e.g., your original manufacturer report number and the user facility or importer report number of any report on which your report was based), if...

  15. Hubble Space Telescope Battery Capacity Update

    NASA Technical Reports Server (NTRS)

    Hollandsworth, Roger; Armantrout, Jon; Rao, Gopalakrishna M.

    2007-01-01

    Orbital battery performance for the Hubble Space Telescope is discussed and battery life is predicted which supports decision to replace orbital batteries by 2009-2010 timeframe. Ground characterization testing of cells from the replacement battery build is discussed, with comparison of data from battery capacity characterization with cell studies of Cycle Life and 60% Stress Test at the Naval Weapons Surface Center (NWSC)-Crane, and cell Cycle Life testing at the Marshal Space Flight Center (MSFC). The contents of this presentation includes an update to the performance of the on-orbit batteries, as well as a discussion of the HST Service Mission 4 (SM4) batteries manufactured in 1996 and activated in 2000, and a second set of SM4 backup replacement batteries which began manufacture Jan 11, 2007, with delivery scheduled for July 2008.

  16. 75 FR 81138 - Medicare Program; Home Health Prospective Payment System Rate Update for Calendar Year 2011...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-27

    ... [CMS-1510-CN2] RIN 0938-AP88 Medicare Program; Home Health Prospective Payment System Rate Update for Calendar Year 2011; Changes in Certification Requirements for Home Health Agencies and Hospices AGENCY... ``Medicare Program; Home Health Prospective Payment System Rate Update for Calendar Year 2011; Changes in...

  17. 77 FR 19230 - Western Pacific Fishery Management Council; Public Meetings

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-30

    .... Precious corals fishery and coral reef habitat status. iv. Update on Bio-Sampling Program data summary. v... precious coral fisheries. iv. Coral reef habitat status. v. Update on Bio-Sampling Program and Spearfishing... fisheries. iv. Precious corals fishery and coral reef habitat status. v. Update on Bio-Sampling Program Data...

  18. Federal Geothermal Research Program Update - Fiscal Year 2001

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Laney, P.T.

    2002-08-31

    This Federal Geothermal Program Research Update reviews the specific objectives, status, and accomplishments of DOE's Geothermal Program for Federal Fiscal Year (FY) 2001. The information contained in this Research Update illustrates how the mission and goals of the Office of Geothermal Technologies are reflected in each R&D activity. The Geothermal Program, from its guiding principles to the most detailed research activities, is focused on expanding the use of geothermal energy.

  19. An update of commercial infrared sensing and imaging instruments

    NASA Technical Reports Server (NTRS)

    Kaplan, Herbert

    1989-01-01

    A classification of infrared sensing instruments by type and application, listing commercially available instruments, from single point thermal probes to on-line control sensors, to high speed, high resolution imaging systems is given. A review of performance specifications follows, along with a discussion of typical thermographic display approaches utilized by various imager manufacturers. An update report on new instruments, new display techniques and newly introduced features of existing instruments is given.

  20. 78 FR 41013 - Medicare and Medicaid Programs; Home Health Prospective Payment System Rate Update for CY 2014...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-09

    ... [CMS-1450-CN] RIN 0938-AR52 Medicare and Medicaid Programs; Home Health Prospective Payment System Rate Update for CY 2014, Home Health Quality Reporting Requirements, and Cost Allocation of Home Health Survey... period titled ``Medicare and Medicaid Programs; Home Health Prospective Payment System Rate Update for CY...

  1. A Longitudinal Analysis of the Reid List of First Programming Languages

    ERIC Educational Resources Information Center

    Siegfried, Robert M.; Siegfried, Jason P.; Alexandro, Gina

    2016-01-01

    Throughout the 1990s, Richard Reid of Michigan State University maintained a list showing the first programming language used in introductory programming courses taken by computer science and information systems majors; it was updated for several years afterwards with the most recent update done in 2011. This is a follow-up to that last update of…

  2. 32 CFR 37.885 - May I require updated program plans?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 1 2011-07-01 2011-07-01 false May I require updated program plans? 37.885 Section 37.885 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE DoD GRANT AND... Financial and Programmatic Reporting § 37.885 May I require updated program plans? In addition to reports on...

  3. 32 CFR 37.885 - May I require updated program plans?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 1 2013-07-01 2013-07-01 false May I require updated program plans? 37.885 Section 37.885 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE DoD GRANT AND... Financial and Programmatic Reporting § 37.885 May I require updated program plans? In addition to reports on...

  4. 32 CFR 37.885 - May I require updated program plans?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false May I require updated program plans? 37.885 Section 37.885 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE DoD GRANT AND... Financial and Programmatic Reporting § 37.885 May I require updated program plans? In addition to reports on...

  5. 32 CFR 37.885 - May I require updated program plans?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 1 2012-07-01 2012-07-01 false May I require updated program plans? 37.885 Section 37.885 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE DoD GRANT AND... Financial and Programmatic Reporting § 37.885 May I require updated program plans? In addition to reports on...

  6. 32 CFR 37.885 - May I require updated program plans?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 1 2014-07-01 2014-07-01 false May I require updated program plans? 37.885 Section 37.885 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE DoD GRANT AND... Financial and Programmatic Reporting § 37.885 May I require updated program plans? In addition to reports on...

  7. Practical LCA for short shelf life products

    NASA Astrophysics Data System (ADS)

    Laurin, Lise; Goedkoop, Mark; Norris, Greg

    2005-11-01

    Manufacturers in many of today's industries are faced with product shelf life counted in months. Traditionally, this has made it very difficult to make a life cycle assessment (LCA) of a product, since the product would be obsolete by the time the LCA was completed. A new concept in LCA that allows specialists in things other than LCA to rapidly create both a model and generate "what-if" scenarios will allow even manufacturers of short shelf life products take advantage of the benefits of LCA. These industry-specific "wizards" are built around a manufacturing process and can be rapidly updated or customized to a particular manufacturer or process type. Results can be used internally for decision-making and can also enable manufacturers submit information for environmentally preferable purchasing, eco-labels, etc.

  8. Biosimilars: More Treatment Choices and Innovation

    MedlinePlus

    ... Consumers Consumer Updates Biosimilars: More Treatment Choices and Innovation Share Tweet Linkedin Pin it More sharing options ... developing biologics generally is a far more difficult process than manufacturing conventional drugs. A biosimilar is a ...

  9. 76 FR 52667 - International Conference on Harmonisation; Guidance on E2F Development Safety Update Report...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-23

    ... Commission; the European Federation of Pharmaceutical Industries Associations; the Japanese Ministry of Health, Labour, and Welfare; the Japanese Pharmaceutical Manufacturers Association; the Centers for Drug...

  10. [Hygienic problems in the manufacture and usage of fertilizers].

    PubMed

    Tulakan, A V; Mekhant'eva, L E

    2008-01-01

    The paper presents review data on the hygienic problems in the turnover of fertilizers. Agrochemicals are shown to be an additional source of the emission of a number of pollutants into the environment (ambient air, soil, water sources, and foodstuffs). There is evidence that it is important to update environmental hygiene and occupational medicine and to elaborate preventive and health-improving measures when fertilizers and other agrochemicals are manufactured and applied.

  11. 10 CFR 611.202 - Advanced Technology Vehicle Manufacturing Facility Award Program.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Advanced Technology Vehicle Manufacturing Facility Award... TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM Facility/Funding Awards § 611.202 Advanced Technology Vehicle Manufacturing Facility Award Program. DOE may issue, under the Advanced Technology Vehicle...

  12. 10 CFR 611.202 - Advanced Technology Vehicle Manufacturing Facility Award Program.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Advanced Technology Vehicle Manufacturing Facility Award... TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM Facility/Funding Awards § 611.202 Advanced Technology Vehicle Manufacturing Facility Award Program. DOE may issue, under the Advanced Technology Vehicle...

  13. 10 CFR 611.202 - Advanced Technology Vehicle Manufacturing Facility Award Program.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Advanced Technology Vehicle Manufacturing Facility Award... TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM Facility/Funding Awards § 611.202 Advanced Technology Vehicle Manufacturing Facility Award Program. DOE may issue, under the Advanced Technology Vehicle...

  14. 10 CFR 611.202 - Advanced Technology Vehicle Manufacturing Facility Award Program.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Advanced Technology Vehicle Manufacturing Facility Award... TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM Facility/Funding Awards § 611.202 Advanced Technology Vehicle Manufacturing Facility Award Program. DOE may issue, under the Advanced Technology Vehicle...

  15. 10 CFR 611.202 - Advanced Technology Vehicle Manufacturing Facility Award Program.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Advanced Technology Vehicle Manufacturing Facility Award... TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM Facility/Funding Awards § 611.202 Advanced Technology Vehicle Manufacturing Facility Award Program. DOE may issue, under the Advanced Technology Vehicle...

  16. Factors Influencing the Decision to Proceed to Firmware Upgrades to Implanted Pacemakers for Cybersecurity Risk Mitigation.

    PubMed

    Saxon, Leslie A; Varma, Niraj; Epstein, Laurence M; Ganz, Leonard I; Epstein, Andrew E

    2018-05-10

    In August 2017, the first major recall for cybersecurity vulnerabilities in pacemakers capable of remote connectivity was released that impacted 465,000 United States patients. 1,2 The FDA approved a firmware update designed by the manufacturer of the devices as a remediation (Abbott , formally St. Jude Medical). The recall was in response to the public disclosure of vulnerability by an investment firm and produced in a lab environment that could allow an unauthorized party in close proximity to a patient to impact the performance of the device or modify device settings via radio frequency communication. 3 While an exploit has not occurred in a patient and requires a high degree of resources and skill to execute, if accomplished, it could pose a significant risk to device safety and essential performance and cause patient harm. The FDA defines this as an uncontrolled vulnerability. 2 The recall recommendations were coordinated between the FDA, the Industrial Control Systems Cyber Emergency Response Team (ICS-CERT), a division of Homeland Security that responds to and coordinates disclosure of critical infrastructure cybersecurity vulnerabilities and Abbott. 1 All parties urged caution and shared decision making between patient and clinician as to whether to have the device firmware update, a process that requires a clinic visit to implement with a device programmer. The manufacturer bench tested the firmware update but the only prior experience with an implanted device firmware updates was a 2012 ICD firmware update that demonstrated a 0.197% risk of device back-up mode pacing after the upgrade was performed.

  17. Update of FDOT state park & ride lot program planning manual chapters 3, 4, and 6

    DOT National Transportation Integrated Search

    2001-04-01

    Portions of the Florida Department of Transportation (FDOT) State Park & Ride Lot Program Planning Manual, first published in 1989 and revised in 1996, were updated. The scope included examination, testing, and updating, as necessary, the planning fo...

  18. 78 FR 78821 - Manufacturing Extension Partnership Advisory Board

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-27

    ... focus on (1) MEP administrative updates, and (2) Board input into the NIST MEP strategic planning process. The agenda may change to accommodate other Board business. The final agenda will be posted on the...

  19. 40 CFR 710.50 - Activities for which reporting is not required.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... SUBSTANCES CONTROL ACT TSCA CHEMICAL INVENTORY REGULATIONS Inventory Update Reporting for 2006 and Beyond... article. (c) The person manufactured the chemical substance described in § 710.45 in a manner described in...

  20. A Review of Agile and Lean Manufacturing as Issues in Selected International and National Research and Development Programs and Roadmaps

    ERIC Educational Resources Information Center

    Castro, Helio; Putnik, Goran D.; Shah, Vaibhav

    2012-01-01

    Purpose: The aim of this paper is to analyze international and national research and development (R&D) programs and roadmaps for the manufacturing sector, presenting how agile and lean manufacturing models are addressed in these programs. Design/methodology/approach: In this review, several manufacturing research and development programs and…

  1. 77 FR 26509 - Request for Information on Proposed New Program: National Network for Manufacturing Innovation...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-04

    ...): Refining standards, materials, and equipment for additive manufacturing to enable low- cost, low-volume...-01] Request for Information on Proposed New Program: National Network for Manufacturing Innovation...: Request for information. SUMMARY: The NIST-hosted Advanced Manufacturing National Program Office (AMNPO...

  2. Documentation of structures branch programs and program updates. Project 3200

    NASA Technical Reports Server (NTRS)

    Probe, D. G.

    1975-01-01

    Update programming of applications programs for the integrated structural analysis system is reported. An attempt is made to layout a standard document format for the preparation of program documents. Documentation which involves changes, additions, and I/O capability revisions to existing programs includes a checklist which should be reviewed each time a programming effort is documented.

  3. Medicare Program; FY 2018 Hospice Wage Index and Payment Rate Update and Hospice Quality Reporting Requirements. Final rule.

    PubMed

    2017-08-04

    This final rule will update the hospice wage index, payment rates, and cap amount for fiscal year (FY) 2018. Additionally, this rule includes new quality measures and provides an update on the hospice quality reporting program.

  4. 24 CFR 3288.215 - Effect on other manufactured home program requirements.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Effect on other manufactured home... COMMISSIONER, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT MANUFACTURED HOME DISPUTE RESOLUTION PROGRAM State Dispute Resolution Programs in Non-HUD Administered States § 3288.215 Effect on other manufactured home...

  5. 24 CFR 3288.215 - Effect on other manufactured home program requirements.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Effect on other manufactured home... COMMISSIONER, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT MANUFACTURED HOME DISPUTE RESOLUTION PROGRAM State Dispute Resolution Programs in Non-HUD Administered States § 3288.215 Effect on other manufactured home...

  6. 24 CFR 3288.215 - Effect on other manufactured home program requirements.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 5 2011-04-01 2011-04-01 false Effect on other manufactured home... COMMISSIONER, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT MANUFACTURED HOME DISPUTE RESOLUTION PROGRAM State Dispute Resolution Programs in Non-HUD Administered States § 3288.215 Effect on other manufactured home...

  7. Cabana Multi-User Spaceport Tour/CRS-10

    NASA Image and Video Library

    2017-02-17

    Robert Cabana, director of NASA’s Kennedy Space Center, accompanied news media on Friday, February 17 for a three-part tour of facilities in the Launch Complex 39 area at Kennedy. Media received an update on the transition of government facilities to the aerospace industry, and how that approach enables NASA and industry success. The tour included the Vehicle Assembly Building, where extensive work is being completed to prepare not only for NASA’s Space Launch System, but also enables members of the aerospace industry to use the facility between NASA missions. The tour completed at Boeing’s Commercial Crew and Cargo Processing Facility, previously a shuttle processing facility, where the company is manufacturing its Starliner spacecraft for flight tests and ultimately crew rotation missions with NASA’s Commercial Crew Program.

  8. Computer program for updating timber resource statistics by county, with tables for Mississippi

    Treesearch

    Roy C. Beltz; Joe F. Christopher

    1970-01-01

    A computer program is available for updating Forest Survey estimates of timber growth, cut, and inventory volume by species group, for sawtimber and growing stock. Changes in rate of product removal are estimated from changes in State severance tax data. Updated tables are given for Mississippi.

  9. Transition Program for Equipment Manufacturers (TPEM)

    EPA Pesticide Factsheets

    In order to provide flexibility for small equipment manufacturers that must comply with new regulations, EPA created the Transition Program for Equipment Manufacturers, better known as “TPEM” or “flexibility program.”

  10. Fuel consumption modeling in support of ATM environmental decision-making

    DOT National Transportation Integrated Search

    2009-07-01

    The FAA has recently updated the airport terminal : area fuel consumption methods used in its environmental models. : These methods are based on fitting manufacturers fuel : consumption data to empirical equations. The new fuel : consumption metho...

  11. U.S. Coast Guard, Office of Boating Safety

    MedlinePlus

    ... COAST GUARD ISSUES FINALE RULE – UPDATE OF OUTBOARD ENGINE WEIGHT TEST REQUIREMENTS FY18 National Nonprofit Organization Funding ... operator, passenger, or concerned individual, can make a difference. Manufacturers Is your boat safe? You can check ...

  12. Information for Patients Who Have Metal-on-Metal Hip Implants

    MedlinePlus

    ... can often lead manufacturers to improve an implant’s design and update device labeling for future patients. In ... patients American Association of Hip and Knee Surgeons: Pre Op Surgery Center Patient Education: Hip Replacement Surgery ...

  13. Effect of policies on pellet production and forests in the U.S. South: a technical document supporting the Forest Service update of the 2010 RPA Assessment

    Treesearch

    Karen L. Abt; Robert C. Abt; Christopher S. Galik; Kenneth E. Skog

    2014-01-01

    Current policies in the European Union (EU) requiring renewable and low greenhouse gas-emitting energy are affecting wood products manufacturing and forests in the United States. These policies have led to increased U.S. pellet production and export to the EU, which has in turn affected U.S. forests and other wood products manufacturing. At this time, the primary...

  14. NXE pellicle: development update

    NASA Astrophysics Data System (ADS)

    Brouns, Derk; Bendiksen, Aage; Broman, Par; Casimiri, Eric; Colsters, Paul; de Graaf, Dennis; Harrold, Hilary; Hennus, Piet; Janssen, Paul; Kramer, Ronald; Kruizinga, Matthias; Kuntzel, Henk; Lafarre, Raymond; Mancuso, Andrea; Ockwell, David; Smith, Daniel; van de Weg, David; Wiley, Jim

    2016-09-01

    ASML introduced the NXE pellicle concept, a removable pellicle solution that is compatible with current and future patterned mask inspection methods. We will present results of how we have taken the idea from concept to a demonstrated solution enabling the use of EUV pellicle by the industry for high volume manufacturing. We will update on the development of the next generation of pellicle films with higher power capability. Further, we will provide an update on top level requirements for pellicles and external interface requirements needed to support NXE pellicle adoption at a mask shop. Finally, we will present ASML's pellicle handling equipment to enable pellicle use at mask shops and our NXE pellicle roadmap outlining future improvements.

  15. Space Technology Mission Directorate Game Changing Development Program FY2015 Annual Program Review: Advanced Manufacturing Technology

    NASA Technical Reports Server (NTRS)

    Vickers, John; Fikes, John

    2015-01-01

    The Advance Manufacturing Technology (AMT) Project supports multiple activities within the Administration's National Manufacturing Initiative. A key component of the Initiative is the Advanced Manufacturing National Program Office (AMNPO), which includes participation from all federal agencies involved in U.S. manufacturing. In support of the AMNPO the AMT Project supports building and Growing the National Network for Manufacturing Innovation through a public-private partnership designed to help the industrial community accelerate manufacturing innovation. Integration with other projects/programs and partnerships: STMD (Space Technology Mission Directorate), HEOMD, other Centers; Industry, Academia; OGA's (e.g., DOD, DOE, DOC, USDA, NASA, NSF); Office of Science and Technology Policy, NIST Advanced Manufacturing Program Office; Generate insight within NASA and cross-agency for technology development priorities and investments. Technology Infusion Plan: PC; Potential customer infusion (TDM, HEOMD, SMD, OGA, Industry); Leverage; Collaborate with other Agencies, Industry and Academia; NASA roadmap. Initiatives include: Advanced Near Net Shape Technology Integrally Stiffened Cylinder Process Development (launch vehicles, sounding rockets); Materials Genome; Low Cost Upper Stage-Class Propulsion; Additive Construction with Mobile Emplacement (ACME); National Center for Advanced Manufacturing.

  16. 2017 State of Wind Development in the United States by Region

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Oteri, Frank A; Baranowski, Ruth E; Baring-Gould, Edward I

    This document summarizes the status and drivers for U.S. wind energy development during 2017. Regional Resource Center (RRC) leaders provided a report of wind energy development in their regions, which was combined with findings from National Renewable Energy Laboratory (NREL) researchers to provide an account of the state of the regions, as well as updates on developments in individual states. NREL researchers and state partners added updates for all states that are not directly supported by an RRC. Accounts for each region include updates on renewable portfolio standards, workforce development, manufacturing and economic development, and individual state updates for installedmore » wind capacity, ongoing policy developments, planned projects and their status, transmission progress reports, etc. This report also highlights the efforts of the RRCs to engage stakeholders in their individual regions.« less

  17. Simulation Environment Synchronizing Real Equipment for Manufacturing Cell

    NASA Astrophysics Data System (ADS)

    Inukai, Toshihiro; Hibino, Hironori; Fukuda, Yoshiro

    Recently, manufacturing industries face various problems such as shorter product life cycle, more diversified customer needs. In this situation, it is very important to reduce lead-time of manufacturing system constructions. At the manufacturing system implementation stage, it is important to make and evaluate facility control programs for a manufacturing cell, such as ladder programs for programmable logical controllers (PLCs) rapidly. However, before the manufacturing systems are implemented, methods to evaluate the facility control programs for the equipment while mixing and synchronizing real equipment and virtual factory models on the computers have not been developed. This difficulty is caused by the complexity of the manufacturing system composed of a great variety of equipment, and stopped precise and rapid support of a manufacturing engineering process. In this paper, a manufacturing engineering environment (MEE) to support manufacturing engineering processes using simulation technologies is proposed. MEE consists of a manufacturing cell simulation environment (MCSE) and a distributed simulation environment (DSE). MCSE, which consists of a manufacturing cell simulator and a soft-wiring system, is emphatically proposed in detail. MCSE realizes making and evaluating facility control programs by using virtual factory models on computers before manufacturing systems are implemented.

  18. 75 FR 3911 - Advisory Board on Radiation and Worker Health (ABRWH or Advisory Board), National Institute for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-25

    ...: The Advisory Board was established under the Energy Employees Occupational Illness Compensation... employees at any Department of Energy facility who were exposed to radiation but for whom it is not feasible... Labor (DOL) Program Update; Department of Energy (DOE) Program Update; OCAS Science Update; Special...

  19. ARS NP212 Climate change, soils and emissions program update

    USDA-ARS?s Scientific Manuscript database

    The Agricultural Research Service National Program 212 (Climate Change, Soils, and Emissions) has a significant component focused on air quality studies. Presented here for the Agricultural Air Quality Task Force is an update on the status of ARS programs with focus on air quality. National Program ...

  20. Comparison of international guideline programs to evaluate and update the Dutch program for clinical guideline development in physical therapy

    PubMed Central

    Van der Wees, Philip J; Hendriks, Erik JM; Custers, Jan WH; Burgers, Jako S; Dekker, Joost; de Bie, Rob A

    2007-01-01

    Background Clinical guidelines are considered important instruments to improve quality in health care. Since 1998 the Royal Dutch Society for Physical Therapy (KNGF) produced evidence-based clinical guidelines, based on a standardized program. New developments in the field of guideline research raised the need to evaluate and update the KNGF guideline program. Purpose of this study is to compare different guideline development programs and review the KNGF guideline program for physical therapy in the Netherlands, in order to update the program. Method Six international guideline development programs were selected, and the 23 criteria of the AGREE Instrument were used to evaluate the guideline programs. Information about the programs was retrieved from published handbooks of the organizations. Also, the Dutch program for guideline development in physical therapy was evaluated using the AGREE criteria. Further comparison the six guideline programs was carried out using the following elements of the guideline development processes: Structure and organization; Preparation and initiation; Development; Validation; Dissemination and implementation; Evaluation and update. Results Compliance with the AGREE criteria of the guideline programs was high. Four programs addressed 22 AGREE criteria, and two programs addressed 20 AGREE criteria. The previous Dutch program for guideline development in physical therapy lacked in compliance with the AGREE criteria, meeting only 13 criteria. Further comparison showed that all guideline programs perform systematic literature searches to identify the available evidence. Recommendations are formulated and graded, based on evidence and other relevant factors. It is not clear how decisions in the development process are made. In particular, the process of translating evidence into practice recommendations can be improved. Conclusion As a result of international developments and consensus, the described processes for developing clinical practice guidelines have much in common. The AGREE criteria are common basis for the development of guidelines, although it is not clear how final decisions are made. Detailed comparison of the different guideline programs was used for updating the Dutch program. As a result the updated KNGF program complied with 22 AGREE criteria. International discussion is continuing and will be used for further improvement of the program. PMID:18036215

  1. Comparison of international guideline programs to evaluate and update the Dutch program for clinical guideline development in physical therapy.

    PubMed

    Van der Wees, Philip J; Hendriks, Erik J M; Custers, Jan W H; Burgers, Jako S; Dekker, Joost; de Bie, Rob A

    2007-11-23

    Clinical guidelines are considered important instruments to improve quality in health care. Since 1998 the Royal Dutch Society for Physical Therapy (KNGF) produced evidence-based clinical guidelines, based on a standardized program. New developments in the field of guideline research raised the need to evaluate and update the KNGF guideline program. Purpose of this study is to compare different guideline development programs and review the KNGF guideline program for physical therapy in the Netherlands, in order to update the program. Six international guideline development programs were selected, and the 23 criteria of the AGREE Instrument were used to evaluate the guideline programs. Information about the programs was retrieved from published handbooks of the organizations. Also, the Dutch program for guideline development in physical therapy was evaluated using the AGREE criteria. Further comparison the six guideline programs was carried out using the following elements of the guideline development processes: Structure and organization; Preparation and initiation; Development; Validation; Dissemination and implementation; Evaluation and update. Compliance with the AGREE criteria of the guideline programs was high. Four programs addressed 22 AGREE criteria, and two programs addressed 20 AGREE criteria. The previous Dutch program for guideline development in physical therapy lacked in compliance with the AGREE criteria, meeting only 13 criteria. Further comparison showed that all guideline programs perform systematic literature searches to identify the available evidence. Recommendations are formulated and graded, based on evidence and other relevant factors. It is not clear how decisions in the development process are made. In particular, the process of translating evidence into practice recommendations can be improved. As a result of international developments and consensus, the described processes for developing clinical practice guidelines have much in common. The AGREE criteria are common basis for the development of guidelines, although it is not clear how final decisions are made. Detailed comparison of the different guideline programs was used for updating the Dutch program. As a result the updated KNGF program complied with 22 AGREE criteria. International discussion is continuing and will be used for further improvement of the program.

  2. Update On Vapor Intrusion At The U.S. EPA

    EPA Science Inventory

    Increasing attention has been given to understanding the impacts of subsurface vapor contaminant migration into overlying buildings. Many of these impacted structures are residences and manufacturing facilities where current and future occupants face undesirable health risks. T...

  3. 78 FR 30863 - Judges Panel of the Malcolm Baldrige National Quality Award and Board of Overseers of the Malcolm...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-23

    ... issues of manufacturing companies, service companies, small businesses, health care providers, and... Panel Update and Ethics Review, Applicants and Eligibility, New Business/ Public Comment. The agenda may...

  4. Supplier's Status for Critical Solid Propellants, Explosive, and Pyrotechnic Ingredients

    NASA Technical Reports Server (NTRS)

    Sims, B. L.; Painter, C. R.; Nauflett, G. W.; Cramer, R. J.; Mulder, E. J.

    2000-01-01

    In the early 1970's a program was initiated at the Naval Surface Warfare Center/Indian Head Division (NSWC/IHDIV) to address the well-known problems associated with availability and suppliers of critical ingredients. These critical ingredients are necessary for preparation of solid propellants and explosives manufactured by the Navy. The objective of the program was to identify primary and secondary (or back-up) vendor information for these critical ingredients, and to develop suitable alternative materials if an ingredient is unavailable. In 1992 NSWC/IHDIV funded Chemical Propulsion Information Agency (CPIA) under a Technical Area Task (TAT) to expedite the task of creating a database listing critical ingredients used to manufacture Navy propellant and explosives based on known formulation quantities. Under this task CPIA provided employees that were 100 percent dedicated to the task of obtaining critical ingredient suppliers information, selecting the software and designing the interface between the computer program and the database users. TAT objectives included creating the Explosive Ingredients Source Database (EISD) for Propellant, Explosive and Pyrotechnic (PEP) critical elements. The goal was to create a readily accessible database, to provide users a quick-view summary of critical ingredient supplier's information and create a centralized archive that CPIA would update and distribute. EISD funding ended in 1996. At that time, the database entries included 53 formulations and 108 critical used to manufacture Navy propellant and explosives. CPIA turned the database tasking back over to NSWC/IHDIV to maintain and distribute at their discretion. Due to significant interest in propellant/explosives critical ingredients suppliers' status, the Propellant Development and Characterization Subcommittee (PDCS) approached the JANNAF Executive committee (EC) for authorization to continue the critical ingredient database work. In 1999, JANNAF EC approved the PDCS panel task. This paper is designed to emphasize the necessity of maintaining a JANNAF community supported database, which monitors PEP critical ingredient suppliers' status. The final product of this task is a user friendly, searchable database that provides a quick-view summary of critical ingredient supplier's information. This database must be designed to serve the needs of JANNAF and the propellant and energetic commercial manufacturing community as well. This paper provides a summary of the type of information to archive each critical ingredient.

  5. Blade System Design Study. Part II, final project report (GEC).

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Griffin, Dayton A.

    2009-05-01

    As part of the U.S. Department of Energy's Low Wind Speed Turbine program, Global Energy Concepts LLC (GEC)1 has studied alternative composite materials for wind turbine blades in the multi-megawatt size range. This work in one of the Blade System Design Studies (BSDS) funded through Sandia National Laboratories. The BSDS program was conducted in two phases. In the Part I BSDS, GEC assessed candidate innovations in composite materials, manufacturing processes, and structural configurations. GEC also made recommendations for testing composite coupons, details, assemblies, and blade substructures to be carried out in the Part II study (BSDS-II). The BSDS-II contract periodmore » began in May 2003, and testing was initiated in June 2004. The current report summarizes the results from the BSDS-II test program. Composite materials evaluated include carbon fiber in both pre-impregnated and vacuum-assisted resin transfer molding (VARTM) forms. Initial thin-coupon static testing included a wide range of parameters, including variation in manufacturer, fiber tow size, fabric architecture, and resin type. A smaller set of these materials and process types was also evaluated in thin-coupon fatigue testing, and in ply-drop and ply-transition panels. The majority of materials used epoxy resin, with vinyl ester (VE) resin also used for selected cases. Late in the project, testing of unidirectional fiberglass was added to provide an updated baseline against which to evaluate the carbon material performance. Numerous unidirectional carbon fabrics were considered for evaluation with VARTM infusion. All but one fabric style considered suffered either from poor infusibility or waviness of fibers combined with poor compaction. The exception was a triaxial carbon-fiberglass fabric produced by SAERTEX. This fabric became the primary choice for infused articles throughout the test program. The generally positive results obtained in this program for the SAERTEX material have led to its being used in innovative prototype blades of 9-m and 30-m length, as well as other non-wind related structures.« less

  6. 75 FR 30386 - Sunshine Act Notice

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-01

    ... updates on Voting System Testing and Certification programs, including UOCAVA Pilot Program Voting Systems... Voting Systems Threat Analysis. The Board will receive updates on research and studies, including draft...

  7. Constellation Program Update

    NASA Image and Video Library

    2006-06-04

    Jeff Hanley, Constellation Program Manager, right, listens to a question during a NASA Update outlining responsibilities of the NASA centers associated with the Constellation Program for robotic and human Moon and Mars exploration on Wednesday, June 5, 2006, at NASA Headquarters in Washington. Photo Credit: (NASA/Bill Ingalls)

  8. 76 FR 9502 - Medicare Program; Home Health Prospective Payment System Rate Update for Calendar Year 2011...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-18

    ... [CMS-1510-F2] RIN 0938-AP88 Medicare Program; Home Health Prospective Payment System Rate Update for Calendar Year 2011; Changes in Certification Requirements for Home Health Agencies and Hospices; Correction... set forth an update to the Home Health Prospective Payment System (HH PPS) rates, including: The...

  9. 78 FR 27242 - Updated Special Advisory Bulletin on the Effect of Exclusion From Participation in Federal Health...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-09

    ...] Updated Special Advisory Bulletin on the Effect of Exclusion From Participation in Federal Health Care... health care programs by OIG. The updated Special Advisory Bulletin describes the scope and effect of the legal prohibition on payment by Federal health care programs for items or services furnished (1) by an...

  10. 15 CFR 290.3 - Program description.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE... subject of research in NIST's Automated Manufacturing Research Facility (AMRF). The core of AMRF research... manufacturing technology. (b) Program objective. The objective of the NIST Manufacturing Technology Centers is...

  11. 15 CFR 290.3 - Program description.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE... subject of research in NIST's Automated Manufacturing Research Facility (AMRF). The core of AMRF research... manufacturing technology. (b) Program objective. The objective of the NIST Manufacturing Technology Centers is...

  12. 15 CFR 290.3 - Program description.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE... subject of research in NIST's Automated Manufacturing Research Facility (AMRF). The core of AMRF research... manufacturing technology. (b) Program objective. The objective of the NIST Manufacturing Technology Centers is...

  13. Using the Wilderness to Facilitate Adjustment to College: An Updated Description of Wilderness Orientation Programs.

    ERIC Educational Resources Information Center

    Davis-Berman, Jennifer; Berman, Dene

    1996-01-01

    Updated description of 38 wilderness orientation programs currently affiliated with U.S. colleges and universities includes program enrollment, length, cost, types of leaders, training, and sponsorship. Discusses program philosophies, goals, reasons for using the wilderness, and critical and emerging issues. Compares data to previous research.…

  14. 77 FR 58359 - TRICARE, Formerly Known as the Civilian Health and Medical Program of the Uniformed Services...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-20

    ... Medical Program of the Uniformed Services; Calendar Year 2013 TRICARE Young Adult Program Premium Update... Young Adult Premiums for Calendar Year 2013. SUMMARY: This notice provides the updated TRICARE Young... to implement the TRICARE Young Adult (TYA) program as required by Title 10, United States Code...

  15. Computer Program and User Documentation Medical Data Update System

    NASA Technical Reports Server (NTRS)

    Anderson, J.

    1971-01-01

    The update system for the NASA medical data minicomputer storage and retrieval system is described. The discussion includes general and technical specifications, a subroutine list, and programming instructions.

  16. User's guide to the MESOI diffusion model and to the utility programs UPDATE and LOGRVU

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Athey, G.F.; Allwine, K.J.; Ramsdell, J.V.

    MESOI is an interactive, Lagrangian puff trajectory diffusion model. The model is documented separately (Ramsdell and Athey, 1981); this report is intended to provide MESOI users with the information needed to successfully conduct model simulations. The user is also provided with guidance in the use of the data file maintenance and review programs; UPDATE and LOGRVU. Complete examples are given for the operaton of all three programs and an appendix documents UPDATE and LOGRVU.

  17. Synthesizing information-update functions using off-line symbolic processing

    NASA Technical Reports Server (NTRS)

    Rosenschein, Stanley J.

    1990-01-01

    This paper explores the synthesis of programs that track dynamic conditions in their environment. An approach is proposed in which the designer specifies, in a declarative language, aspects of the environment in which the program will be embedded. This specification is then automatically compiled into a program that, when executed, updates internal data structures so as to maintain as an invariant a desired correspondence between internal data structures and states of the external environment. This approach retains much of the flexibility of declarative programming while guaranteeing a hard bound on the execution time of information-update functions.

  18. From Paper to Production: An Update on NASA's Upper Stage Engine for Exploration

    NASA Technical Reports Server (NTRS)

    Kynard, Mike

    2010-01-01

    In 2006, NASA selected an evolved variant of the proven Saturn/Apollo J-2 upper stage engine to power the Ares I crew launch vehicle upper stage and the Ares V cargo launch vehicle Earth departure stage (EDS) for the Constellation Program. Any design changes needed by the new engine would be based where possible on proven hardware from the Space Shuttle, commercial launchers, and other programs. In addition to the thrust and efficiency requirements needed for the Constellation reference missions, it would be an order of magnitude safer than past engines. It required the J-2X government/industry team to develop the highest performance engine of its type in history and develop it for use in two vehicles for two different missions. In the attempt to achieve these goals in the past five years, the Upper Stage Engine team has made significant progress, successfully passing System Requirements Review (SRR), System Design Review (SDR), Preliminary Design Review (PDR), and Critical Design Review (CDR). As of spring 2010, more than 100,000 experimental and development engine parts have been completed or are in various stages of manufacture. Approximately 1,300 of more than 1,600 engine drawings have been released for manufacturing. This progress has been due to a combination of factors: the heritage hardware starting point, advanced computer analysis, and early heritage and development component testing to understand performance, validate computer modeling, and inform design trades. This work will increase the odds of success as engine team prepares for powerpack and development engine hot fire testing in calendar 2011. This paper will provide an overview of the engine development program and progress to date.

  19. Role of National Immunization Technical Advisory Group on improvement of immunization programmes in the Islamic Republic of Iran.

    PubMed

    Zahraei, Seyed Mohsen; Marandi, Alireza; Sadrizadeh, Bijan; Gouya, Mehdi Mohammad; Rezaei, Parviz; Vazirian, Parviz; Yaghini, Fatheme

    2010-04-19

    The National Immunization Technical Advisory Group (NITAG) was established in Iran in 1982 and has made many important technical recommendations (e.g., regarding polio eradication, introduction of new vaccines, organizing special studies) that have contributed to a dramatic decline in vaccine preventable disease burden. The NITAG consists of experts from the Ministry of Health and Medical Education (MOHME), vaccine manufacturers, and medical universities with national Expanded Program of Immunization (EPI) staff serving as the secretariat. It is not completely independent from MOHME or EPI. It meets on a quarterly basis, and publishes national guidelines and immunization schedules that are updated regularly. Although primarily an advisory body, representation from MOHME members, including the EPI manager, ensures almost universal implementation of NITAG recommendations. Copyright © 2010 Elsevier Ltd. All rights reserved.

  20. An update on the development of a line-focus refractive concentrator array

    NASA Technical Reports Server (NTRS)

    Piszczor, Michael F.; Oneill, Mark J.; Fraas, Lewis M.

    1994-01-01

    Concentrator arrays offer a number of generic benefits for space (i.e. high array efficiency, protection from space radiation effects, minimized plasma interactions, etc.). The line-focus refractive concept, however, also offers two very important advantages: (1) relaxation of precise array tracking requirements to only a single axis and (2) low-cost mass production of the lens material. The linear refractive concentrator can be designed to provide an essentially flat response over a wide range of longitudinal errors for satellites having only single-axis tracking capability. New panel designs emphasize light weight, high stiffness, storability, and ease of manufacturing and assembly. This paper addresses the current status of the concentrator program with special emphasis on the design implications, and flexibility, of using a linear refractive concentrator lens as well as details recent fabrication of prototype hardware.

  1. An Update on the Development of a Line-Focus Refractive Concentrator Array

    NASA Technical Reports Server (NTRS)

    Piszczor, Michael F.; ONeill, Mark J.; Fraas, Lewis M.

    1994-01-01

    Concentrator arrays offer a number of generic benefits for space (i.e. high array efficiency, protection from space radiation effects, minimized plasma interactions, etc.). The line-focus refractive concentrator concept, however, also offers two very important advantages: (1) relaxation of precise array tracking requirements to only a single axis and (2) low-cost mass production of the lens material. The linear refractive concentrator can be designed to provide an essentially flat response over a wide range of longitudinal errors for satellites having only single-axis tracking capability. New panel designs emphasize light weight, high stiffness, stowability and ease of manufacturing and assembly. This paper will address the current status of the concentrator program with special emphasis on the design implications, and flexibility, of using a linear refractive concentrator lens as well as detail the recent fabrication of prototype hardware.

  2. Computer Integrated Manufacturing Programs in Higher Education.

    ERIC Educational Resources Information Center

    International Business Machines Corp., Milford, CT. Academic Information Systems.

    This publication focuses on computer integrated manufacturing (CIM) programs at several higher education institutions which teach the use of computing in manufacturing. The document describes programs at the following institutions: University of Alabama (where researchers are investigating CIM techniques with a key focus on transferring their…

  3. 77 FR 67449 - Medicare Program; End-Stage Renal Disease Prospective Payment System, Quality Incentive Program...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-09

    ... Blended Payment a. Update to the Drug Add-on to the Composite Rate Portion of the ESRD Blended Payment Rate i. Estimating Growth in Expenditures for Drugs and Biologicals in CY 2013 ii. Estimating Per Patient Growth iii. Applying the Growth Update to the Drug Add-On Adjustment iv. Update to the Drug Add-On...

  4. Updating the Economic Impacts of the High/Scope Perry Preschool Program

    ERIC Educational Resources Information Center

    Nores, Milagros; Belfield, Clive R.; Barnett, W. Steven; Schweinhart, Lawrence

    2005-01-01

    This article derives an updated cost-benefit ratio for the High/Scope Perry Preschool Program, an intensive preschool intervention delivered during the 1960s to at-risk children in Ypsilanti, Michigan. Because children were randomly assigned to the program or a control group, differences in outcomes are probably attributable to program status.…

  5. IRIS Toxicological Review of Acrylonitrile (External Review Draft)

    EPA Science Inventory

    [UPDATE] New Schedule for IRIS Acrylonitrile Assessment

    In May 2012, EPA developed a new schedule for completing the IRIS acrylonitrile assessment. Acrylonitrile is primarily used in the manufacture of acrylic and modacrylic fibers, plastics, and nitrile rubbers. It ...

  6. 48 CFR 235.006-70 - Manufacturing Technology Program.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Manufacturing Technology... CONTRACTING 235.006-70 Manufacturing Technology Program. In accordance with 10 U.S.C. 2521(d), for acquisitions under the Manufacturing Technology Program— (a) Award all contracts using competitive procedures...

  7. 48 CFR 235.006-70 - Manufacturing Technology Program.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Manufacturing Technology... CONTRACTING 235.006-70 Manufacturing Technology Program. In accordance with 10 U.S.C. 2521(d), for acquisitions under the Manufacturing Technology Program— (a) Award all contracts using competitive procedures...

  8. 48 CFR 235.006-70 - Manufacturing Technology Program.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Manufacturing Technology... CONTRACTING 235.006-70 Manufacturing Technology Program. In accordance with 10 U.S.C. 2521(d), for acquisitions under the Manufacturing Technology Program— (a) Award all contracts using competitive procedures...

  9. 48 CFR 235.006-70 - Manufacturing Technology Program.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Manufacturing Technology... CONTRACTING 235.006-70 Manufacturing Technology Program. In accordance with 10 U.S.C. 2521(d), for acquisitions under the Manufacturing Technology Program— (a) Award all contracts using competitive procedures...

  10. 48 CFR 235.006-70 - Manufacturing Technology Program.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Manufacturing Technology... CONTRACTING 235.006-70 Manufacturing Technology Program. In accordance with 10 U.S.C. 2521(d), for acquisitions under the Manufacturing Technology Program— (a) Award all contracts using competitive procedures...

  11. Integrated flexible manufacturing program for manufacturing automation and rapid prototyping

    NASA Technical Reports Server (NTRS)

    Brooks, S. L.; Brown, C. W.; King, M. S.; Simons, W. R.; Zimmerman, J. J.

    1993-01-01

    The Kansas City Division of Allied Signal Inc., as part of the Integrated Flexible Manufacturing Program (IFMP), is developing an integrated manufacturing environment. Several systems are being developed to produce standards and automation tools for specific activities within the manufacturing environment. The Advanced Manufacturing Development System (AMDS) is concentrating on information standards (STEP) and product data transfer; the Expert Cut Planner system (XCUT) is concentrating on machining operation process planning standards and automation capabilities; the Advanced Numerical Control system (ANC) is concentrating on NC data preparation standards and NC data generation tools; the Inspection Planning and Programming Expert system (IPPEX) is concentrating on inspection process planning, coordinate measuring machine (CMM) inspection standards and CMM part program generation tools; and the Intelligent Scheduling and Planning System (ISAPS) is concentrating on planning and scheduling tools for a flexible manufacturing system environment. All of these projects are working together to address information exchange, standardization, and information sharing to support rapid prototyping in a Flexible Manufacturing System (FMS) environment.

  12. Kennedy Space Center Director Update

    NASA Image and Video Library

    2014-03-06

    CAPE CANAVERAL, Fla. - Community leaders, business executives, educators, and state and local government leaders were updated on NASA Kennedy Space Center programs and accomplishments during Center Director Bob Cabana’s Center Director Update at the Debus Center at the Kennedy Space Center Visitor Complex in Florida. An attendee talks with Trent Smith, program manager, and Tammy Belk, a program specialist, at the ISS Ground Processing and Research Office display. Attendees talked with Cabana and other senior Kennedy managers and visited displays featuring updates on Kennedy programs and projects, including International Space Station, Commercial Crew, Ground System Development and Operations, Launch Services, Center Planning and Development, Technology, KSC Swamp Works and NASA Education. The morning concluded with a tour of the new Space Shuttle Atlantis exhibit at the visitor complex. For more information, visit http://www.nasa.gov/kennedy. Photo credit: NASA/Daniel Casper

  13. Stockpiling anti-viral drugs for a pandemic: the role of Manufacturer Reserve Programs.

    PubMed

    Harrington, Joseph E; Hsu, Edbert B

    2010-05-01

    To promote stockpiling of anti-viral drugs by non-government organizations such as hospitals, drug manufacturers have introduced Manufacturer Reserve Programs which, for an annual fee, provide the right to buy in the event of a severe outbreak of influenza. We show that these programs enhance drug manufacturer profits but could either increase or decrease the amount of pre-pandemic stockpiling of anti-viral drugs.

  14. Use of expert systems for the selection and the design of solar domestic hot water systems

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Panteliou, S.; Dentsoras, A.; Daskalopoulos, E.

    1996-07-01

    The aim of this article is the study of the application of expert systems to a mechanical engineering research domain with practical and commercial interest, such as design and manufacturing of Solar Domestic Hot Water (SDHW) Systems. The issues studied were the selection and the design of SDHW systems. The application of an expert system was explored. Frame and class formalism was used for knowledge representation together with forward and backward chaining techniques for drawing conclusions and utilizing the accumulated information present. The appropriate computer program was developed to yield the selection of SDHW systems using the software tool LEONARDOmore » 3.0 (1989), an integrated environment for the development of expert systems. The developed program was tested with data according to the Greek standard ELOT corresponding to the ISO/DIS 9459-2 and it performed successfully for 21 SDHW systems available on the Greek market. Apart from the possibility of selection of a SDHW system, the program also supports the facility for updating its knowledge based with new data so that it can be adapted to changes appearing on the market. The program proved to be functional and user friendly to a high degree. 8 refs., 9 figs.« less

  15. A compilation of technology spinoffs from the US Space Shuttle Program

    NASA Technical Reports Server (NTRS)

    Jackson, David Jeff

    1993-01-01

    As the successful transfer of NASA-developed technology is a stated mission of NASA, the documentation of such transfer is vital in support of the program. The purpose of this report is to document technology transfer, i.e. 'spinoffs', from the U.S. Space Shuttle Program to the commercial sector. These spinoffs have their origin in the many scientific and engineering fields associated with the shuttle program and, as such, span many diverse commercial applications. These applications include, but are not limited to, consumer products, medicine, industrial productivity, manufacturing technology, public safety, resources management, materials processing, transportation, energy, computer technology, construction, and environmental applications. To aide to the generation of this technology spinoff list, significant effort was made to establish numerous and complementary sources of information. The primary sources of information used in compiling this list include: the NASA 'Spinoff' publication, NASA Tech Briefs, the Marshall Space Flight Center (MSFC) Technology Utilization (TU) Office, the NASA Center for Aerospace Information (CASI), the NASA COSMIC Software Center, and MSFC laboratory and contractor personnel. A complete listing of resources may be found in the bibliography of this report. Additionally, effort was made to insure that the obtained information was placed in electronic database form to insure that the subsequent updating would be feasible with minimal effort.

  16. Automated design synthesis of robotic/human workcells for improved manufacturing system design in hazardous environments

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Williams, Joshua M.

    Manufacturing tasks that are deemed too hazardous for workers require the use of automation, robotics, and/or other remote handling tools. The associated hazards may be radiological or nonradiological, and based on the characteristics of the environment and processing, a design may necessitate robotic labor, human labor, or both. There are also other factors such as cost, ergonomics, maintenance, and efficiency that also effect task allocation and other design choices. Handling the tradeoffs of these factors can be complex, and lack of experience can be an issue when trying to determine if and what feasible automation/robotics options exist. To address thismore » problem, we utilize common engineering design approaches adapted more for manufacturing system design in hazardous environments. We limit our scope to the conceptual and embodiment design stages, specifically a computational algorithm for concept generation and early design evaluation. In regard to concept generation, we first develop the functional model or function structure for the process, using the common 'verb-noun' format for describing function. A common language or functional basis for manufacturing was developed and utilized to formalize function descriptions and guide rules for function decomposition. Potential components for embodiment are also grouped in terms of this functional language and are stored in a database. The properties of each component are given as quantitative and qualitative criteria. Operators are also rated for task-relevant criteria which are used to address task compatibility. Through the gathering of process requirements/constraints, construction of the component database, and development of the manufacturing basis and rule set, design knowledge is stored and available for computer use. Thus, once the higher level process functions are defined, the computer can automate the synthesis of new design concepts through alternating steps of embodiment and function structure updates/decomposition. In the process, criteria guide function allocation of components/operators and help ensure compatibility and feasibility. Through multiple function assignment options and varied function structures, multiple design concepts are created. All of the generated designs are then evaluated based on a number of relevant evaluation criteria: cost, dose, ergonomics, hazards, efficiency, etc. These criteria are computed using physical properties/parameters of each system based on the qualities an engineer would use to make evaluations. Nuclear processes such as oxide conversion and electrorefining are utilized to aid algorithm development and provide test cases for the completed program. Through our approach, we capture design knowledge related to manufacturing and other operations in hazardous environments to enable a computational program to automatically generate and evaluate system design concepts.« less

  17. Teaching Adaptability of Object-Oriented Programming Language Curriculum

    ERIC Educational Resources Information Center

    Zhu, Xiao-dong

    2012-01-01

    The evolution of object-oriented programming languages includes update of their own versions, update of development environments, and reform of new languages upon old languages. In this paper, the evolution analysis of object-oriented programming languages is presented in term of the characters and development. The notion of adaptive teaching upon…

  18. Program Description: EDIT Program and Vendor Master Update, SWRL Financial System.

    ERIC Educational Resources Information Center

    Ikeda, Masumi

    Computer routines to edit input data for the Southwest Regional Laboratory's (SWRL) Financial System are described. The program is responsible for validating input records, generating records for further system processing, and updating the Vendor Master File--a file containing the information necessary to support the accounts payable and…

  19. 78 FR 58291 - TRICARE; Fiscal Year 2014 Continued Health Care Benefit Program Premium Update

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-23

    ... DEPARTMENT OF DEFENSE Office of the Secretary TRICARE; Fiscal Year 2014 Continued Health Care... Health Care Benefit Program Premiums for Fiscal Year 2014. SUMMARY: This notice provides the updated Continued Health Care Benefit Program Premiums for Fiscal Year 2014. DATES: The Fiscal Year 2014 rates...

  20. The SKI-HI Program: A Descriptive Update, 1986.

    ERIC Educational Resources Information Center

    Bruce, Sandy; And Others

    This document provides updated information on the SKI-HI program model which presently serves over 2000 young hearing impaired children in 35 states and Canada. The program focuses on training parents in the skills needed to maximize language stimulation and minimize language deprivation. Among 14 educational and philosophical underpinnings of the…

  1. 77 FR 56671 - Notice of Proposed Information Collection: Comment Request Manufactured Home Construction and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-13

    ... Information Collection: Comment Request Manufactured Home Construction and Safety Standards Program AGENCY... FR 45648, HUD published Manufactured Home Construction and Safety Standards Program. The forms were.... This Notice also lists the following information: Title of Proposal: Manufactured Home Construction and...

  2. 10 CFR 603.885 - Updated program plans and budgets.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... program plans and budgets. In addition to reports on progress to date, a TIA may include a provision requiring the recipient to annually prepare an updated technical plan for future conduct of the research...

  3. Alternative Fuels Data Center: Maps and Data

    Science.gov Websites

    emissions comparison of heavy duty vehicles as captured by the Clean Cities Program. Last update February emissions comparison of light duty vehicles as captured by the Clean Cities Program. Last update February

  4. Alternative Fuels Data Center: Maps and Data

    Science.gov Websites

    gas emissions comparison of heavy duty vehicles as captured by the Clean Cities Program. Last update gas emissions comparison of light duty vehicles as captured by the Clean Cities Program. Last update

  5. Guidance system operations plan for manned LM earth orbital and lunar missions using program luminary 1E. Section 2: Data links

    NASA Technical Reports Server (NTRS)

    Hamilton, M. H.

    1972-01-01

    Data links for the guidance system of manned lunar module orbital and lunar missions are presented. Subjects discussed are: (1) digital uplink to lunar module, (2) lunar module liftoff time increment, (3) lunar module contiguous block update, (4) lunar module scatter update, (5) lunar module digital downlink, and (6) absolute addresses for update program.

  6. 77 FR 10373 - Greenhouse Gas Reporting Program: Electronics Manufacturing: Revisions to Heat Transfer Fluid...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-22

    ... Greenhouse Gas Reporting Program: Electronics Manufacturing: Revisions to Heat Transfer Fluid Provisions... technical revisions to the electronics manufacturing source category of the Greenhouse Gas Reporting Rule... related to the electronics manufacturing source category. DATES: This rule will be effective on March 23...

  7. Cancer incidence and mortality in workers employed at a transformer manufacturing plant: update to a cohort study.

    PubMed

    Yassi, Annalee; Tate, Robert B; Routledge, Michael

    2003-07-01

    This study is an extension of a previously published analysis of cancer mortality in a transformer manufacturing plant where there had been extensive use of mineral oil transformer fluid. The objectives of the present study were to update the mortality analysis and include deaths for the past 6 years as well as to do an analysis of cancer incidence of the cohort. A cohort of 2,222 males working at a transformer manufacturing plant between 1946 and 1975 was constructed. Using a classical historical cohort study design, cancer incidence and mortality were determined through record linkage with Canadian provincial and national registries. The rates of cancer incidence and mortality experienced by this cohort were compared to that of the Canadian male population. A statistically significant increased risk of developing and dying of pancreatic cancer was found but not an increase in overall cancer mortality. This was consistent with the previous report from this group. Interestingly, the cohort demonstrated a statistically significant risk of overall cancer incidence and specific increased incidence of gallbladder cancer. This study contributes further evidence to the growing body of literature indicating the carcinogenic properties of mineral oils used in occupational settings, in particular those used prior to 1970s. Copyright 2003 Wiley-Liss, Inc.

  8. New Mexico Small Business Assistance (NMSBA) September 2016 Advisory Council Update

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Larkin, Ariana Kayla

    This is an update on two projects headed by Los Alamos National Laboratory and Sandia National Laboratories. The two projects are: The Electrochemical Based Gas Analyzer for Automotive Diagnostic and Maximizing the Production of High Value and High Demand Guar Gum on Marginal Lands in New Mexico. The Electrochemical Based Gas Analyzer for Automotive Diagnostic NMSBA leveraged project is made up of Albuquerque companies, Automotive Test Solutions, Inc. (ATS), ATS Mobile Diagnostics and Thoma Technologies and Los Alamos small business, VI Control Systems, to develop a new sensor system for the automotive industry. The Guar Gum NMSBA Leveraged Project beganmore » in January 2016 with the goal to develop biotechnology to enable a genetic modification of prairie cordgrass, a renewable feedstock for bioenergy and bio-manufacturing. In the long term, the companies hope to use the technology to bio-manufacture high value products in the stem of the plant. This document describes the laboratories' cooperation with small businesses on these projects.« less

  9. Manufacturing Affordability

    DTIC Science & Technology

    2011-10-01

    Effective planning early in and throughout program develop - ment is critical to enabling manufacturing affordability. There is no silver bullet and no...unexpected lessons. “Gee, this stove is hot” may be an unexpected lesson for the toddler but should not be so for the adult. All production programs...in program design efforts from day 1 of Engineer- ing and Manufacturing Development , you should be seriously worried. A program that includes the

  10. Digital mammography. Why hasn't it been approved for U.S. hospitals?

    PubMed

    2000-01-01

    Mammography is the only major imaging technique still unavailable in the United States in digital form. This is because the Food and Drug Administration (FDA) has been unable to devise an effective method for manufacturers to demonstrate the safety and efficacy of digital mammography systems. As a result, the agency has been unable to approve any of those systems for marketing in the United States. In this Regulatory Update, we describe FDA's recent efforts to help manufacturers obtain approval and the reasons those efforts have so far proved ineffective.

  11. Retrofit Gloveport Cover and Security Device

    DOE PAGES

    Hinckley, Jon E.

    2015-01-01

    The world of glovebox work in the areas of science and manufacturing is in a consistent state of flux due to the inherent nature of changing missions. These rapidly changing work environments result in almost continuous regulatory changes within the codes and standards in order to maintain worker and environmental safety. Gloveboxes designed and manufactured prior to these regulations are not easy to update or retrofit to accommodate new requirements. In order to meet the challenge of retrofitting gloveboxes to the meet the requirements, the following solutions have been developed.

  12. Pilot production & commercialization of LAPPD ™

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Minot, Michael J.; Bennis, Daniel C.; Bond, Justin L.

    We present a progress update on plans to establish pilot production and commercialization of Large Area (400 cm2) Picosecond Photodetector (LAPPD™). Steps being taken to commercialize this MCP and LAPPD™ technology and begin tile pilot production are presented including (1) the manufacture of 203 mm×203 mm borosilicate glass capillary arrays (GCAs), (2) optimization of MCP performance and creation of an ALD coating facility to manufacture MCPs and (3) design, construction and commissioning of UHV tile integration and sealing facility to produce LAPPDs. Taken together these plans provide a “pathway toward commercialization”.

  13. 10 CFR 603.885 - Updated program plans and budgets.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Updated program plans and budgets. 603.885 Section 603.885... program plans and budgets. In addition to reports on progress to date, a TIA may include a provision... effort and a revised budget if there is a significant change from the initial budget. ...

  14. Guidance system operations plan for manned cm earth orbital and lunar missions using program Colossus 3. Section 2: Data links

    NASA Technical Reports Server (NTRS)

    Hamilton, M. H.

    1971-01-01

    The data links for use with the guidance system operations plan for manned command module earth orbital and lunar missions using program Colossus 3 are presented. The subjects discussed are: (1) digital uplink to CMC, (2) command module contiguous block update, (3) CMC retrofire external data update, (4) CMC digital downlink, and (5) CMC entry update.

  15. Manufacturing Math Classes: An Instructional Program Guide for Manufacturing Workers.

    ERIC Educational Resources Information Center

    McBride, Pamela G.; And Others

    This program guide documents a manufacturing job family curriculum that develops competence in generic work force education skills through three courses: Reading Rulers, Charts, and Gauges and Math for Manufacturing Workers I and II. An annotated table of contents lists a brief description of the questions answered in each section. An introduction…

  16. NOAAPORT User's Page

    Science.gov Websites

    Update History NOAAPORT Technical Contacts NOAAPORT Program Overview NOAAPORT Reference Documentation NOAAPORT Update History - for the NOAAPORT Program. NOAAPORT Technical Contacts - NWS Technical Points of Alignment Information. Receiver Characteristics - Technical Characteristics of the NOAAPORT Receiver. Data

  17. Computer Integrated Manufacturing. Florida Vocational Program Guide.

    ERIC Educational Resources Information Center

    University of South Florida, Tampa. Dept. of Adult and Vocational Education.

    This packet contains a program guide and Career Merit Achievement Plan (Career MAP) for the implementation of a computer-integrated manufacturing program in Florida secondary and postsecondary schools. The program guide describes the program content and structure, provides a program description, lists job titles under the program, and includes a…

  18. GEONETCast Americas - Architecture

    Science.gov Websites

    contributors PRODUCTS GEONETCast Product Navigator Channel listing Admin Notes Register a product USERS About receiver stations Manufacturer list Configuration Request a product Register FAQs, Links, Pubs FAQs Links NOAA 2007-11-12 Updated product listing. Moved 21 products from Planned to Available status. Filenames

  19. 40 CFR 86.096-38 - Maintenance instructions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... and distributing the information, excluding any research and development costs incurred in designing... four months after the effective date may request an additional six months lead time to meet this... specified in paragraph (g)(5) of this section. (ii) Be updated at the same time as manufacturer-franchised...

  20. 40 CFR 86.1808-01 - Maintenance instructions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... and distributing the information, excluding any research and development costs incurred in designing... four months after the effective date may request an additional six months lead time to meet this... specified in paragraph (f)(5) of this section. (ii) Be updated at the same time as manufacturer-franchised...

  1. 40 CFR 86.096-38 - Maintenance instructions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... and distributing the information, excluding any research and development costs incurred in designing... four months after the effective date may request an additional six months lead time to meet this... specified in paragraph (g)(5) of this section. (ii) Be updated at the same time as manufacturer-franchised...

  2. 40 CFR 86.1808-01 - Maintenance instructions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... and distributing the information, excluding any research and development costs incurred in designing... four months after the effective date may request an additional six months lead time to meet this... specified in paragraph (f)(5) of this section. (ii) Be updated at the same time as manufacturer-franchised...

  3. 40 CFR 86.096-38 - Maintenance instructions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... and distributing the information, excluding any research and development costs incurred in designing... four months after the effective date may request an additional six months lead time to meet this... specified in paragraph (g)(5) of this section. (ii) Be updated at the same time as manufacturer-franchised...

  4. 40 CFR 86.1808-01 - Maintenance instructions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... and distributing the information, excluding any research and development costs incurred in designing... four months after the effective date may request an additional six months lead time to meet this... specified in paragraph (f)(5) of this section. (ii) Be updated at the same time as manufacturer-franchised...

  5. WHO expert committee on specifications for pharmaceutical preparations. Fortieth report.

    PubMed

    2006-01-01

    This report presents the recommendations of an international group of experts convened by the World Health Organization to consider matters concerning the quality assurance of pharmaceuticals and specifications for drug substances and dosage forms. The report is complemented by a number of annexes. These include: a list of available International Chemical Reference Substances and International Infrared Spectra; supplementary guidelines on good manufacturing practices for heating, ventilation and air-conditioning systems for non-sterile pharmaceutical dosage forms; updated supplementary guidelines on good manufacturing practices for the manufacture of herbal medicines; supplementary guidelines on good manufacturing practices for validation; good distribution practices for pharmaceutical products; a model quality assurance system for procurement agencies (recommendations for quality assurance systems focusing on prequalification of products and manufacturers, purchasing, storage and distribution of pharmaceutical products); multisource (generic) pharmaceutical products: guidelines on registration requirements to establish interchangeability; a proposal to waive in vivo bioequivalence requirements for WHO Model List of Essential Medicines immediate-release, solid oral dosage forms; and additional guidance for organizations performing in vivo bioequivalence studies.

  6. Opportunities for Success: Cost-Effective Programs for Children, Update, 1990. Report together with Additional Minority Views and Dissenting Views of the Select Committee on Children, Youth, and Families, One Hundred First Congress, Second Session.

    ERIC Educational Resources Information Center

    Congress of the U.S., Washington, DC. House Select Committee on Children, Youth, and Families.

    This report on effective programs for children updates the 1988 report by providing new and stronger documentation of the programs' benefits and cost effectiveness. Eight programs and types of programs are discussed in Part I and four program areas that warrant attention are discussed in Part II. Part I reports on: (1) the Special Supplemental…

  7. Kennedy Space Center Director Update

    NASA Image and Video Library

    2014-03-06

    CAPE CANAVERAL, Fla. - Community leaders, business executives, educators, and state and local government leaders were updated on NASA Kennedy Space Center programs and accomplishments during Center Director Bob Cabana’s Center Director Update at the Debus Center at the Kennedy Space Center Visitor Complex in Florida. Attendees mingled and visited various displays, including Ground Systems Development and Operations Program and Education Office displays. Attendees talked with Cabana and other senior Kennedy managers and visited displays featuring updates on Kennedy programs and projects, including International Space Station, Commercial Crew, Ground System Development and Operations, Launch Services, Center Planning and Development, Technology, KSC Swamp Works and NASA Education. The morning concluded with a tour of the new Space Shuttle Atlantis exhibit at the visitor complex. For more information, visit http://www.nasa.gov/kennedy. Photo credit: NASA/Daniel Casper

  8. Kennedy Space Center Director Update

    NASA Image and Video Library

    2014-03-06

    CAPE CANAVERAL, Fla. - Community leaders, business executives, educators, and state and local government leaders were updated on NASA Kennedy Space Center programs and accomplishments during Center Director Bob Cabana’s Center Director Update at the Debus Center at the Kennedy Space Center Visitor Complex in Florida. An attendee talks with Scott Thurston, Kennedy deputy of the spacecraft office at the Commercial Crew Program display. Attendees talked with Cabana and other senior Kennedy managers and visited displays featuring updates on Kennedy programs and projects, including International Space Station, Commercial Crew, Ground System Development and Operations, Launch Services, Center Planning and Development, Technology, KSC Swamp Works and NASA Education. The morning concluded with a tour of the new Space Shuttle Atlantis exhibit at the visitor complex. For more information, visit http://www.nasa.gov/kennedy. Photo credit: NASA/Daniel Casper

  9. Cycle 24 HST+COS Target Acquisition Monitor Summary

    NASA Astrophysics Data System (ADS)

    Penton, Steven V.; White, James

    2018-06-01

    HST/COS calibration program 14847 (P14857) was designed to verify that all three COS Target Acquisition (TA) modes were performing nominally during Cycle 24. The program was designed not only to determine if any of the COS TA flight software (FSW) patchable constants need updating but also to determine the values of any required parameter updates. All TA modes were determined to be performing nominally during the Cycle 24 calendar period of October 1, 2016 - October 1, 2017. No COS SIAF, TA subarray, or FSW parameter updates were required as a result of this program.

  10. Nanomanufacturing-related programs at NSF

    NASA Astrophysics Data System (ADS)

    Cooper, Khershed P.

    2015-08-01

    The National Science Foundation is meeting the challenge of transitioning lab-scale nanoscience and technology to commercial-scale through several nanomanufacturing-related research programs. The goal of the core Nanomanufacturing (NM) and the inter-disciplinary Scalable Nanomanufacturing (SNM) programs is to meet the barriers to manufacturability at the nano-scale by developing the fundamental principles for the manufacture of nanomaterials, nanostructures, nanodevices, and engineered nanosystems. These programs address issues such as scalability, reliability, quality, performance, yield, metrics, and cost, among others. The NM and SNM programs seek nano-scale manufacturing ideas that are transformative, that will be widely applicable and that will have far-reaching technological and societal impacts. It is envisioned that the results from these basic research programs will provide the knowledge base for larger programs such as the manufacturing Nanotechnology Science and Engineering Centers (NSECs) and the Nanosystems Engineering Research Centers (NERCs). Besides brief descriptions of these different programs, this paper will include discussions on novel

  11. 24 CFR 3286.511 - Inspector qualifications.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... URBAN DEVELOPMENT MANUFACTURED HOME INSTALLATION PROGRAM Inspection of Installations in HUD-Administered... a manufactured home that is subject to the requirements of the HUD-administered installation program: (1) A manufactured home or residential building inspector employed by the local authority having...

  12. 15 CFR 292.1 - Program description.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION...)(3) and 278l), as amended, NIST will provide financial assistance to develop the infrastructure of the national manufacturing extension system. Under the NIST Manufacturing Extension Partnership (MEP...

  13. 15 CFR 292.1 - Program description.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION...)(3) and 278l), as amended, NIST will provide financial assistance to develop the infrastructure of the national manufacturing extension system. Under the NIST Manufacturing Extension Partnership (MEP...

  14. 15 CFR 292.1 - Program description.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION...)(3) and 278l), as amended, NIST will provide financial assistance to develop the infrastructure of the national manufacturing extension system. Under the NIST Manufacturing Extension Partnership (MEP...

  15. 15 CFR 292.1 - Program description.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION...)(3) and 278l), as amended, NIST will provide financial assistance to develop the infrastructure of the national manufacturing extension system. Under the NIST Manufacturing Extension Partnership (MEP...

  16. 15 CFR 292.1 - Program description.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION...)(3) and 278l), as amended, NIST will provide financial assistance to develop the infrastructure of the national manufacturing extension system. Under the NIST Manufacturing Extension Partnership (MEP...

  17. Presenting an Approach for Conducting Knowledge Architecture within Large-Scale Organizations

    PubMed Central

    Varaee, Touraj; Habibi, Jafar; Mohaghar, Ali

    2015-01-01

    Knowledge architecture (KA) establishes the basic groundwork for the successful implementation of a short-term or long-term knowledge management (KM) program. An example of KA is the design of a prototype before a new vehicle is manufactured. Due to a transformation to large-scale organizations, the traditional architecture of organizations is undergoing fundamental changes. This paper explores the main strengths and weaknesses in the field of KA within large-scale organizations and provides a suitable methodology and supervising framework to overcome specific limitations. This objective was achieved by applying and updating the concepts from the Zachman information architectural framework and the information architectural methodology of enterprise architecture planning (EAP). The proposed solution may be beneficial for architects in knowledge-related areas to successfully accomplish KM within large-scale organizations. The research method is descriptive; its validity is confirmed by performing a case study and polling the opinions of KA experts. PMID:25993414

  18. Updates from the AmeriFlux Management Project Tech Team

    NASA Astrophysics Data System (ADS)

    Biraud, S.; Chan, S.; Dengel, S.; Polonik, P.; Hanson, C. V.; Billesbach, D. P.; Torn, M. S.

    2017-12-01

    The goal of AmeriFlux is to develop a network of long-term flux sites for quantifying and understanding the role of the terrestrial biosphere in global climate and environmental change. The AmeriFlux Management Program (AMP) Tech Team at LBNL strengthens the AmeriFlux Network by (1) standardizing operational practices, (2) developing calibration and maintenance routines, and (3) setting clear data quality goals. In this poster we will present results and recent progress in three areas: IRGA intercomparison experiment in cooperation with UC Davis, and main manufacturers of sensors used in the AmeriFlux network (LI-COR, Picarro, and Campbell Scientific). Gill sonic anemometers characterization in collaboration with John Frank and Bill Massman (US Forest Service) following the discovery of a significant firmware problem in commonly used Gill Sonic anemometer, Unmanned aerial systems (UAS), and sensors systematically used at AmeriFlux sites to improve site characterization.

  19. Presenting an Approach for Conducting Knowledge Architecture within Large-Scale Organizations.

    PubMed

    Varaee, Touraj; Habibi, Jafar; Mohaghar, Ali

    2015-01-01

    Knowledge architecture (KA) establishes the basic groundwork for the successful implementation of a short-term or long-term knowledge management (KM) program. An example of KA is the design of a prototype before a new vehicle is manufactured. Due to a transformation to large-scale organizations, the traditional architecture of organizations is undergoing fundamental changes. This paper explores the main strengths and weaknesses in the field of KA within large-scale organizations and provides a suitable methodology and supervising framework to overcome specific limitations. This objective was achieved by applying and updating the concepts from the Zachman information architectural framework and the information architectural methodology of enterprise architecture planning (EAP). The proposed solution may be beneficial for architects in knowledge-related areas to successfully accomplish KM within large-scale organizations. The research method is descriptive; its validity is confirmed by performing a case study and polling the opinions of KA experts.

  20. Bladed-shrouded-disc aeroelastic analyses: Computer program updates in NASTRAN level 17.7

    NASA Technical Reports Server (NTRS)

    Gallo, A. M.; Elchuri, V.; Skalski, S. C.

    1981-01-01

    In October 1979, a computer program based on the state-of-the-art compressor and structural technologies applied to bladed-shrouded-disc was developed. The program was more operational in NASTRAN Level 16. The bladed disc computer program was updated for operation in NASTRAN Level 17.7. The supersonic cascade unsteady aerodynamics routine UCAS, delivered as part of the NASTRAN Level 16 program was recorded to improve its execution time. These improvements are presented.

  1. WHO consultation on clinical evaluation of vaccines, 17-18 July 2014, WHO Headquarters, Geneva, Switzerland.

    PubMed

    Knezevic, Ivana; Moorthy, Vasee; Sheets, Rebecca

    2015-04-21

    A World Health Organization (WHO) consultation on guidelines for National Regulatory Authorities (NRAs) and vaccine manufacturers on clinical evaluation of vaccines was held from 17 to 18 July 2014, to review key scientific challenges that regulators have been facing since the establishment of the WHO Guidelines on Clinical Evaluation of Vaccines. The guidelines, adopted by the WHO Expert Committee on Biological Standardization (ECBS) in 2001, have served as the basis for setting or updating national requirements for the evaluation and licensing of a broad range of vaccines as well as for WHO vaccine prequalification. Regulators from Australia, Brazil, China, Canada, Germany, India, Republic of Korea, South Africa, United States of America and the United Kingdom were represented. The International Federation for Pharmaceutical Manufacturers' Association (IFPMA) and the Developing Country Vaccine Manufacturers' Network (DCVMN) provided industry representation. The consultation concluded that the guidelines should be revised to address issues that were raised in the context of vaccines that were the subject of clinical development in the past decade. Although the current guidelines have served well over time, it was recognized that an update would further increase their utility and would help regulators, manufacturers, vaccine developers and academia to respond to the challenging questions regarding the safety, immunogenicity, efficacy and effectiveness of vaccines intended for global use. A summary of the main outcomes of the consultation and proposals for the next steps regarding the guidelines and beyond are provided in this report. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  2. AMPS/PC - AUTOMATIC MANUFACTURING PROGRAMMING SYSTEM

    NASA Technical Reports Server (NTRS)

    Schroer, B. J.

    1994-01-01

    The AMPS/PC system is a simulation tool designed to aid the user in defining the specifications of a manufacturing environment and then automatically writing code for the target simulation language, GPSS/PC. The domain of problems that AMPS/PC can simulate are manufacturing assembly lines with subassembly lines and manufacturing cells. The user defines the problem domain by responding to the questions from the interface program. Based on the responses, the interface program creates an internal problem specification file. This file includes the manufacturing process network flow and the attributes for all stations, cells, and stock points. AMPS then uses the problem specification file as input for the automatic code generator program to produce a simulation program in the target language GPSS. The output of the generator program is the source code of the corresponding GPSS/PC simulation program. The system runs entirely on an IBM PC running PC DOS Version 2.0 or higher and is written in Turbo Pascal Version 4 requiring 640K memory and one 360K disk drive. To execute the GPSS program, the PC must have resident the GPSS/PC System Version 2.0 from Minuteman Software. The AMPS/PC program was developed in 1988.

  3. Designing of network planning system for small-scale manufacturing

    NASA Astrophysics Data System (ADS)

    Kapulin, D. V.; Russkikh, P. A.; Vinnichenko, M. V.

    2018-05-01

    The paper presents features of network planning in small-scale discrete production. The procedure of explosion of the production order, considering multilevel representation, is developed. The software architecture is offered. Approbation of the network planning system is carried out. This system allows carrying out dynamic updating of the production plan.

  4. 77 FR 37587 - Updating OSHA Standards Based on National Consensus Standards; Head Protection

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-22

    ... testing for helmets worn in the backwards position (``reverse wearing''), optional testing for helmets at colder temperatures than provided in previous editions, and optional testing for the high- visibility coloring of helmets. If manufacturers choose to evaluate their helmets using any of these three testing...

  5. 77 FR 37617 - Updating OSHA Standards Based on National Consensus Standards; Head Protection

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-22

    ... provisions in the 2009 edition permitting optional testing for helmets worn in the backwards position (``reverse wearing''), optional testing for helmets at colder temperatures than provided in previous editions, and optional testing for the high- visibility coloring of helmets. If manufacturers choose to evaluate...

  6. 40 CFR 86.010-38 - Maintenance instructions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... information, excluding any research and development costs incurred in designing and implementing, upgrading or... complying with this provision by August 27, 2009, may request an additional six months lead time to meet... information specified in paragraph (j)(6) of this section. (ii) Be updated at the same time as manufacturer...

  7. 40 CFR 86.1808-01 - Maintenance instructions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... and distributing the information, excluding any research and development costs incurred in designing... specified in paragraph (f)(5) of this section. (ii) Be updated at the same time as manufacturer-franchised... required to make their entire site accessible for the respective period of time and price. In other words...

  8. 10 CFR 430.24 - Units to be tested.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... the method includes an ARM/simulation adjustment factor(s), determine the value(s) of the factors(s... process. (v) If request for approval is for an updated ARM, manufacturers must identify modifications made to the ARM since the last submittal, including any ARM/simulation adjustment factor(s) added since...

  9. 14 CFR 43.3 - Persons authorized to perform maintenance, preventive maintenance, rebuilding, and alterations.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... category. (h) Notwithstanding the provisions of paragraph (g) of this section, the Administrator may... Product and Process Specification issued by the Administrator; and (3) Perform any inspection required by... manufactures under a production certificate. (k) Updates of databases in installed avionics meeting the...

  10. 75 FR 13678 - Schedules of Controlled Substances; Table of Excluded Nonnarcotic Products: Nasal Decongestant...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-23

    ... 1117-AB23 Schedules of Controlled Substances; Table of Excluded Nonnarcotic Products: Nasal Decongestant Inhalers Manufactured by Classic Pharmaceuticals, LLC AGENCY: Drug Enforcement Administration (DEA... Administration (DEA) is updating the Table of Excluded Nonnarcotic Products found in 21 CFR 1308.22 to include...

  11. Program Updates - San Antonio River Basin

    EPA Pesticide Factsheets

    This page will house updates for this urban waters partnership location. As projects progress, status updates can be posted here to reflect the ongoing work by partners in San Antonio working on the San Antonio River Basin.

  12. Bioenergy Technologies Office Multi-Year Program Plan: November 2014 Update

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    2014-11-01

    This is the November 2014 Update to the Multi-Year Program Plan, which sets forth the goals and structure of the Bioenergy Technologies Office. It identifies the RDD&D activities the Office will focus on over the next four years.

  13. Bioenergy Technologies Office Multi-Year Program Plan: March 2015 Update

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    none,

    2015-03-01

    This is the March 2015 Update to the Multi-Year Program Plan, which sets forth the goals and structure of the Bioenergy Technologies Office. It identifies the RDD&D activities the Office will focus on over the next four years.

  14. Airport Improvement Program : update of allocation of funds and passenger facility charges, 1992-1994

    DOT National Transportation Integrated Search

    1995-07-17

    This report updates the General Accounting Office's October 1993 report on the allocation of Airport Improvement Program (AIP) funds from 1982 through 1994 by the Federal Aviation Administration (FAA). Information is provided on FAA's allocation of A...

  15. UPEML: a machine-portable CDC Update emulator

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mehlhorn, T.A.; Young, M.F.

    1984-12-01

    UPEML is a machine-portable CDC Update emulation program. UPEML is written in ANSI standard Fortran-77 and is relatively simple and compact. It is capable of emulating a significant subset of the standard CDC Update functions including program library creation and subsequent modification. Machine-portability is an essential attribute of UPEML. It was written primarily to facilitate the use of CDC-based scientific packages on alternate computer systems such as the VAX 11/780 and the IBM 3081.

  16. 24 CFR 3286.9 - Manufacturer shipment responsibilities.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... instructions. The manufacturer is required to provide with each manufactured home, installation designs and... HOUSING AND URBAN DEVELOPMENT MANUFACTURED HOME INSTALLATION PROGRAM Generally Applicable Provisions and... the time that each manufactured home is shipped by a manufacturer, the manufacturer must provide HUD...

  17. Additive Technology: Update on Current Materials and Applications in Dentistry.

    PubMed

    Barazanchi, Abdullah; Li, Kai Chun; Al-Amleh, Basil; Lyons, Karl; Waddell, J Neil

    2017-02-01

    Additive manufacturing or 3D printing is becoming an alternative to subtractive manufacturing or milling in the area of computer-aided manufacturing. Research on material for use in additive manufacturing is ongoing, and a wide variety of materials are being used or developed for use in dentistry. Some materials, however, such as cobalt chromium, still lack sufficient research to allow definite conclusions about the suitability of their use in clinical dental practice. Despite this, due to the wide variety of machines that use additive manufacturing, there is much more flexibility in the build material and geometry when building structures compared with subtractive manufacturing. Overall additive manufacturing produces little material waste and is energy efficient when compared to subtractive manufacturing, due to passivity and the additive layering nature of the build process. Such features make the technique suitable to be used with fabricating structures out of hard to handle materials such as cobalt chromium. The main limitations of this technology include the appearance of steps due to layering of material and difficulty in fabricating certain material generally used in dentistry for use in 3D printing such as ceramics. The current pace of technological development, however, promises exciting possibilities. © 2016 by the American College of Prosthodontists.

  18. San Diego transit five year plan update : FY 1982-1986

    DOT National Transportation Integrated Search

    1981-07-01

    The Five Year Plan Update constitutes the annual revision to the operating plan and capital program for the following five year planning period, presents its adopted budget and a specific operating plan and capital program for FY 1982 as well as less...

  19. Constellation Program Update

    NASA Image and Video Library

    2006-06-04

    Dean Acosta, NASA Deputy Assistant Administrator and Press Secretary, left, moderates a NASA Update with NASA Administrator Michael Griffin, Scott J. Horowitz, NASA Associate Administrator for Exploration Systems and Jeff Hanley, Constellation Program Manager, right, on Wednesday, June 5, 2006, at NASA Headquarters in Washington. Photo Credit: (NASA/Bill Ingalls)

  20. Legislative Update: Georgia School Funding Update.

    ERIC Educational Resources Information Center

    Holmes, C. Thomas; Sielke, Catherine C.

    2000-01-01

    Fully 40 percent ($5 billion) of Georgia's FY 2000 general funds budget is for K-12 education. There is increased funding for a homestead exemption, expansion of the HOPE (higher education) Scholarship Program, capital outlay projects, remedial assistance programs, and instruction of limited-English speaking students. (MLH)

  1. Experience curve development and cost reduction disaggregation for fuel cell markets in Japan and the US

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wei, Max; Smith, Sarah J.; Sohn, Michael D.

    Technology learning rates can be dynamic quantities as a technology moves from early development to piloting and from low volume manufacturing to high volume manufacturing. This work describes a generalizable technology analysis approach for disaggregating observed technology cost reductions and presents results of this approach for one specific case study (micro-combined heat and power fuel cell systems in Japan). We build upon earlier reports that combine discussion of fuel cell experience curves and qualitative discussion of cost components by providing greater detail on the contributing mechanisms to observed cost reductions, which were not quantified in earlier reports. Greater standardization ismore » added to the analysis approach, which can be applied to other technologies. This paper thus provides a key linkage that has been missing from earlier literature on energy-related technologies by integrating the output of earlier manufacturing cost studies with observed learning rates to quantitatively estimate the different components of cost reduction including economies of scale and cost reductions due to product performance and product design improvements. This work also provides updated fuel cell technology price versus volume trends from the California Self-Generation Incentive Program, including extensive data for solid-oxide fuel cells (SOFC) reported here for the first time. The Japanese micro-CHP market is found to have a learning rate of 18% from 2005 to 2015, while larger SOFC fuel cell systems (200 kW and above) in the California market are found to have a flat (near-zero) learning rate, and these are attributed to a combination of exogenous, market, and policy factors.« less

  2. Bio-Manufacturing to market pilot project

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dressen, Tiffaney

    The Bio-Manufacturing to Market pilot project was a part of the AMJIAC, the Advanced Manufacturing Jobs and Innovation Accelerator Challenge grant. This internship program set out to further define and enhance the talent pipeline from the University and local Community Colleges to startup culture in East Bay Area, provide undergraduate STEM students with opportunities outside academia, and provide startup companies with much needed talent. Over the 4 year period of performance, the Bio-Manufacturing to Market internship program sponsored 75 undergraduate STEM students who were able to spend anywhere from one to six semesters working with local Bay Area startup companiesmore » and DOE sponsored facilities/programs in the biotech, bio-manufacturing, and biomedical device fields.« less

  3. Infanrix hexa and sudden death: a review of the periodic safety update reports submitted to the European Medicines Agency.

    PubMed

    Puliyel, Jacob; Sathyamala, C

    2018-01-01

    There have been a number of spontaneous reports of sudden unexpected death soon after the administration of Infanrix hexa (combined diphtheria, tetanus, acellular pertussis, hepatitis B, inactivated poliomyelitis and Haemophilus influenza type B vaccine). The manufacturer, GlaxoSmithKline (GSK), submits confidential periodic safety update reports (PSURs) on Infanrix hexa to the European Medicines Agency (EMA). The latest is the PSUR 19. Each PSUR contains an analysis of observed/expected sudden deaths, which shows that the number of observed deaths soon after immunisation is lower than that expected by chance. This commentary focuses on that aspect of the PSUR which has a bearing on policy decisions. We analysed the data provided in the PSURs. It is apparent that the deaths acknowledged in the PSUR 16 were deleted from the PSUR 19. The number of observed deaths soon after vaccination among children older than one year was significantly higher than that expected by chance once the deleted deaths were restored and included in the analysis. The manufacturer must explain the figures that have been submitted to the regulatory authorities. The procedures undertaken by the EMA to evaluate the manufacturer's claims in the PSUR need to be reviewed. The Drugs Controller General of India nearly automatically accepts drugs and vaccines approved by the EMA. There is a need to reappraise the reliance on due diligence by the EMA.

  4. Formation of Blood Foam in the Air Trap During Hemodialysis Due to Insufficient Automatic Priming of Dialyzers.

    PubMed

    Jonsson, Per; Lindmark, Lorentz; Axelsson, Jan; Karlsson, Lars; Lundberg, Lennart; Stegmayr, Bernd

    2018-05-01

    We were encouraged to investigate the reasons for large amounts of foam observed in bloodlines during hemodialysis (HD). Foam was visible in the venous air trap within the Artis Gambro dialysis device. Estimates of the extent of foam were graded (0-no foam, 10-extensive foam) by two persons that were blind to the type of dialyzer used. Thirty-seven patients were involved in the dialysis procedures. Consecutive dialyses were graded using dialyzers from Fresenius Medical Care (CorDiax dialyzers that were used for high flux HD-FX80 and FX100, and for hemodiafiltration-FX1000). The extracorporeal circuit was primed automatically by dialysate using Gambro Artis software 8.15 006 (Gambro, Dasco, Medolla Italy, Baxter, Chicago, IL, USA). The priming volume recommended by the manufacturer was 1100 mL, whereas our center uses 1500 mL. Extensive amounts of blood foam were visual in the air traps. Although the manufacturer recommended extension of priming volume up to 3000 mL, this did not eliminate the foam. Microbubble measurement during HD revealed the air to derive from the dialyzers. When changing to PF210H dialyzers (Baxter) and using a priming volume of 1500 mL, the foam was significantly less (P < 0.01). The extent of foam correlated with the size of the FX-dialyzer surface (P = 0.002). The auto-priming program was updated to version 8.21 by the manufacturer and the extent of foam in the air trap using FX dialyzers was now reduced and there was no longer a difference between FX and PF dialyzers, although less foam was still visible in the venous air trap during several dialyses. In conclusion, this study urgently calls attention to blood foam development in the venous air trap when using Artis devices and priming software 8.15 in combination with Fresenius dialyzers. Updated auto-priming software (version 8.21) of Artis should be requested to reduce the extent of foam for the Fresenius dialyzers. Other interactions may also be present. We recommend further studies to clarify these problems. Meanwhile caution is warranted for the combined use of dialysis devices and dialyzers with incompatible automatic priming. © 2018 International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

  5. 76 FR 44605 - Alaska Region's Subsistence Resource Commission (SRC) Program; Public Meeting and Teleconference

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-26

    ... Uses of Bones, Horn, Antlers and Plants Environmental Assessment Update. 12. New Business. 13. Public... Board Update. 10. Alaska Board of Game Update. 11. Old Business: a. Subsistence Uses of Bones, Horn...

  6. Constellation Program Update

    NASA Image and Video Library

    2006-06-04

    NASA Administrator Michael Griffin addresses NASA employees and members of the media about the responsibilities of the NASA centers associated with the Constellation Program for robotic and human Moon and Mars exploration during a NASA Update on Wednesday, June 5, 2006, at NASA Headquarters in Washington. Photo Credit: (NASA/Bill Ingalls)

  7. 78 FR 72139 - Reporting and Recordkeeping Requirements Under OMB Review

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-02

    ...'s 7(a) loan program, are necessary to conform to recent updates to SBA's Standard Operating Procedures (SOP), Lender and Development Company Loan Programs, designated as SOP 50 10 5(F). The update resulted in changes related to franchise eligibility, character determinations, credit standards, and...

  8. Climate programs update: USDA Southwest Regional Climate Hub update

    USDA-ARS?s Scientific Manuscript database

    PROGRAM OVERVIEW: The overarching goal of the USDA SW Climate Hub is to assist farmers, ranchers and foresters in addressing the effects of climate change including prolonged drought, increased insect outbreaks and severe wildfires. In the first year of operations, the SW Climate Hub (est. Februa...

  9. Reliability Evaluation of Concentrator Photovoltaic Modules per IEC Qualification Specifications

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tamizhmani, Govindasamy

    2012-12-05

    This project is related to the qualification testing of new generation CPV (concentrator photovoltaics) modules at lower testing costs and lower turnaround time. In this project, the first testing program was completed for two CPV manufacturers, the second testing program was completed for two manufacturers at 65% of the actual testing cost and at less than 3 months of testing turnaround time and the third testing program was completed for two manufacturers at 65% of the actual testing cost and at less than 3 months of testing turnaround time. Due to their financial situation and restructuring, Amonix (one of themore » CPV manufacturers) intermittently terminated the test programs.« less

  10. Airborne Windshear Detection and Warning Systems. Fifth and Final Combined Manufacturers' and Technologists' Conference, part 2

    NASA Technical Reports Server (NTRS)

    Delnore, Victor E. (Compiler)

    1994-01-01

    The Fifth Combined Manufacturers' and Technologists' Airborne Windshear Review Meeting was hosted by the NASA Langley Research Center and the Federal Aviation Administration in Hampton, Virginia, on September 28-30, 1993. The purpose was to report on the highly successful windshear experiments conducted by government, academic institutions, and industry; to transfer the results to regulators, manufacturers, and users; and to set initiatives for future aeronautics technology research. The formal sessions covered recent developments in windshear flight testing, windshear modeling, flight management, and ground-based systems, airborne windshear detection systems, certification and regulatory issues, and development and applications of sensors for wake vortices and for synthetic and enhanced vision systems. This report was compiled to record and make available the technology updates and materials from the conference.

  11. GSD Update: Year in Review: Spotlight on 2015 Research by the Grassland, Shrubland and Desert Ecosystems Science Program

    Treesearch

    Deborah Finch

    2016-01-01

    In this issue of the GSD Update, we take a look back at selected studies of the Grassland, Shrubland and Desert Ecosystems Science Program (GSD) that depict its strengths and focus areas. Significant results of recent research and science delivery by GSD scientists are highlighted. We feature program research that lines up with the strategic research...

  12. Updated Estimates of the Average Financial Return on Master's Degree Programs in the United States

    ERIC Educational Resources Information Center

    Gándara, Denisa; Toutkoushian, Robert K.

    2017-01-01

    In this study, we provide updated estimates of the private and social financial return on enrolling in a master's degree program in the United States. In addition to returns for all fields of study, we show estimated returns to enrolling in master's degree programs in business and education, specifically. We also conduct a sensitivity analysis to…

  13. NASA Game Changing Development Program Manufacturing Innovation Project

    NASA Technical Reports Server (NTRS)

    Tolbert, Carol; Vickers, John

    2011-01-01

    This presentation examines the new NASA Manufacturing Innovation Project. The project is a part of the Game Changing Development Program which is one element of the Space Technology Programs Managed by Office of the Chief Technologist. The project includes innovative technologies in model-based manufacturing, digital additive manufacturing, and other next generation manufacturing tools. The project is also coupled with the larger federal initiatives in this area including the National Digital Engineering and Manufacturing Initiative and the Advanced Manufacturing Partnership. In addition to NASA, other interagency partners include the Department of Defense, Department of Commerce, NIST, Department of Energy, and the National Science Foundation. The development of game-changing manufacturing technologies are critical for NASA s mission of exploration, strengthening America s manufacturing competitiveness, and are highly related to current challenges in defense manufacturing activities. There is strong consensus across industry, academia, and government that the future competitiveness of U.S. industry will be determined, in large part, by a technologically advanced manufacturing sector. This presentation highlights the prospectus of next generation manufacturing technologies to the challenges faced NASA and by the Department of Defense. The project focuses on maturing innovative/high payoff model-based manufacturing technologies that may lead to entirely new approaches for a broad array of future NASA missions and solutions to significant national needs. Digital manufacturing and computer-integrated manufacturing "virtually" guarantee advantages in quality, speed, and cost and offer many long-term benefits across the entire product lifecycle. This paper addresses key enablers and emerging strategies in areas such as: Current government initiatives, Model-based manufacturing, and Additive manufacturing.

  14. 75 FR 54347 - Draft Guidance for Industry: Bar Code Label Requirements-Questions and Answers (Question 12...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-07

    ...] Draft Guidance for Industry: Bar Code Label Requirements-- Questions and Answers (Question 12 Update... Administration (FDA) is announcing the availability of a draft document entitled ``Guidance for Industry: Bar... guidance provides you, manufacturers of a licensed vaccine, with advice concerning compliance with the bar...

  15. 76 FR 50815 - TSCA Inventory Update Reporting Modifications; Chemical Data Reporting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-16

    ... longer accept paper submissions or electronic media (i.e., as a file on a CD- ROM) for any CDR submission...-mail address: [email protected] . SUPPLEMENTARY INFORMATION: I. Does this action apply to me? You... byproduct chemical substance (NAICS codes 22, 322, 331, and 3344; e.g., utilities, paper manufacturing...

  16. Space transportation booster engine configuration study. Addendum: Design definition document

    NASA Technical Reports Server (NTRS)

    1989-01-01

    Gas generator engine characteristics and results of engine configuration refinements are discussed. Updated component mechanical design, performance, and manufacturing information is provided. The results are also provided of ocean recovery studies and various engine integration tasks. The details are provided of the maintenance plan for the Space Transportation Booster Engine.

  17. Wood usage trends in the furniture and fixtures industry

    Treesearch

    H. N. Spelter; R. N. Stone; D. B. McKeever

    1978-01-01

    Trends of wood use in the furniture and fixtures industry are examined. Wood consumption statistics from the 1972 Census of Manufactures are used to update prior Forest Service surveys, and separate estimates are made for 1977 consumption. A methodology for making up-to-date estimates of wood usage is also presented.

  18. 24 CFR 3282.201 - Scope and purpose.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... manufacturers of manufactured homes for sale to purchasers in the United States with respect to certification of manufactured home designs, inspection of designs, quality assurance programs, and manufactured home production... DEVELOPMENT MANUFACTURED HOME PROCEDURAL AND ENFORCEMENT REGULATIONS Manufacturer Inspection and Certification...

  19. [Plug-in Based Centralized Control System in Operating Rooms].

    PubMed

    Wang, Yunlong

    2017-05-30

    Centralized equipment controls in an operating room (OR) is crucial to an efficient workflow in the OR. To achieve centralized control, an integrative OR needs to focus on designing a control panel that can appropriately incorporate equipment from different manufactures with various connecting ports and controls. Here we propose to achieve equipment integration using plug-in modules. Each OR will be equipped with a dynamic plug-in control panel containing physically removable connecting ports. Matching outlets will be installed onto the control panels of each equipment used at any given time. This dynamic control panel will be backed with a database containing plug-in modules that can connect any two types of connecting ports common among medical equipment manufacturers. The correct connecting ports will be called using reflection dynamics. This database will be updated regularly to include new connecting ports on the market, making it easy to maintain, update, expand and remain relevant as new equipment are developed. Together, the physical panel and the database will achieve centralized equipment controls in the OR that can be easily adapted to any equipment in the OR.

  20. 25 CFR 170.425 - How does BIA update the IRRTIP?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false How does BIA update the IRRTIP? 170.425 Section 170.425 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM Planning, Design, and Construction of Indian Reservation Roads Program Facilities Transportation...

  1. 25 CFR 170.444 - How is the IRR Inventory updated?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false How is the IRR Inventory updated? 170.444 Section 170.444 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM Planning, Design, and Construction of Indian Reservation Roads Program Facilities Irr Inventory...

  2. IMS Version 3 Student Data Base Maintenance Program.

    ERIC Educational Resources Information Center

    Brown, John R.

    Computer routines that update the Instructional Management System (IMS) Version 3 student data base which supports the Southwest Regional Laboratory's (SWRL) student monitoring system are described. Written in IBM System 360 FORTRAN IV, the program updates the data base by adding, changing and deleting records, as well as adding and deleting…

  3. Constellation Program Update

    NASA Image and Video Library

    2006-06-04

    Dean Acosta, NASA Deputy Assistant Administrator and Press Secretary, left, moderates a NASA Update with NASA Administrator Michael Griffin, second from left, Scott J. Horowitz, NASA Associate Administrator for Exploration Systems and Jeff Hanley, Constellation Program Manager, right, on Wednesday, June 5, 2006, at NASA Headquarters in Washington. Photo Credit: (NASA/Bill Ingalls)

  4. 78 FR 58290 - TRICARE; Calendar Year 2014 TRICARE Young Adult Program Premium Update

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-23

    ... DEPARTMENT OF DEFENSE Office of the Secretary TRICARE; Calendar Year 2014 TRICARE Young Adult... Young Adult Premiums for Calendar Year 2014. SUMMARY: This notice provides the updated TRICARE Young Adult program premiums for Calendar Year (CY) 2014. DATES: The CY 2014 rates contained in this notice...

  5. 77 FR 20006 - Reports and Updates on Programs and Research Projects

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-03

    ... ARCTIC RESEARCH COMMISSION Reports and Updates on Programs and Research Projects Notice is hereby given that the U.S. Arctic Research Commission will hold its 97th meeting in Montreal, Quebec, Canada... meeting. (3) Commissioners and staff reports. (4) Discussion and presentations concerning Arctic research...

  6. Development of a Fan-Filter Unit Test Standard, LaboratoryValidations, and its Applications across Industries

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Xu, Tengfang

    2006-10-20

    Lawrence Berkeley National Laboratory (LBNL) is now finalizing the Phase 2 Research and Demonstration Project on characterizing 2-foot x 4-foot (61-cm x 122-cm) fan-filter units in the market using the first-ever standard laboratory test method developed at LBNL.[1][2][3] Fan-filter units deliver re-circulated air and provide particle filtration control for clean environments. Much of the energy in cleanrooms (and minienvironments) is consumed by 2-foot x 4-foot (61-cm x 122-cm) or 4-foot x 4-foot (122-cm x 122-cm) fan-filter units that are typically located in the ceiling (25-100% coverage) of cleanroom controlled environments. Thanks to funding support by the California Energy Commission's Industrialmore » Program of the Public Interest Energy Research (PIER) Program, and significant participation from manufacturers and users of fan-filter units from around the world, LBNL has developed and performed a series of standard laboratory tests and reporting on a variety of 2-foot x 4-foot (61-cm x 122-cm) fan-filter units (FFUs). Standard laboratory testing reports have been completed and reported back to anonymous individual participants in this project. To date, such reports on standard testing of FFU performance have provided rigorous and useful data for suppliers and end users to better understand, and more importantly, to quantitatively characterize performance of FFU products under a variety of operating conditions.[1] In the course of the project, the standard laboratory method previously developed at LBNL has been under continuous evaluation and update.[2][3] Based upon the updated standard, it becomes feasible for users and suppliers to characterize and evaluate energy performance of FFUs in a consistent way.« less

  7. Kennedy Space Center Director Update

    NASA Image and Video Library

    2014-03-06

    CAPE CANAVERAL, Fla. - Community leaders, business executives, educators, and state and local government leaders were updated on NASA Kennedy Space Center programs and accomplishments during Center Director Bob Cabana’s Center Director Update at the Debus Center at the Kennedy Space Center Visitor Complex in Florida. From left, Scott Thurston, Kennedy deputy of the spacecraft office of the Commercial Crew Program, talks with Scott Colloredo, director of the Center Planning and Development Directorate. Attendees talked with Cabana and other senior Kennedy managers and visited displays featuring updates on Kennedy programs and projects, including International Space Station, Commercial Crew, Ground System Development and Operations, Launch Services, Center Planning and Development, Technology, KSC Swamp Works and NASA Education. The morning concluded with a tour of the new Space Shuttle Atlantis exhibit at the visitor complex. For more information, visit http://www.nasa.gov/kennedy. Photo credit: NASA/Daniel Casper

  8. Implementing Computer Integrated Manufacturing Technician Program.

    ERIC Educational Resources Information Center

    Gibbons, Roger

    A computer-integrated manufacturing (CIM) technician program was developed to provide training and technical assistance to meet the needs of business and industry in the face of the demands of high technology. The Computer and Automated Systems Association (CASA) of the Society of Manufacturing Engineers provided the incentive and guidelines…

  9. Automated Manufacturing/Robotics Technology: Certificate and Associate Degree Programs.

    ERIC Educational Resources Information Center

    McQuay, Paul L.

    A description is provided of the Automated Manufacturing/Robotics program to be offered at Delaware County Community College beginning in September 1984. Section I provides information on the use of reprogramable industrial robots in manufacturing and the rapid changes in production that can be effected through the application of automated…

  10. 77 FR 39265 - Request for Manufacturer Involvement in National Institute of Justice (NIJ) Standard Development...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-02

    ... DEPARTMENT OF JUSTICE Office of Justice Programs [OJP (NIJ) Docket No. 1593] Request for Manufacturer Involvement in National Institute of Justice (NIJ) Standard Development Efforts AGENCY: National Institute of Justice, Office of Justice Programs, DOJ. ACTION: Notice of Request for Manufacturer...

  11. Implementation of Effective Capstone Projects in Undergraduate Manufacturing Design Engineering Program

    ERIC Educational Resources Information Center

    Viswanathan, Shekar

    2017-01-01

    Final program projects (capstone course) in manufacturing design engineering technology at National University are intensive experiences in critical thinking and analysis, designed to broaden students' perspectives and provide an opportunity for integration of coursework in the area of manufacturing design engineering. This paper focuses on three…

  12. Planetary Mission Entry Vehicles Quick Reference Guide. Version 3.0

    NASA Technical Reports Server (NTRS)

    Davies, Carol; Arcadi, Marla

    2006-01-01

    This is Version 3.0 of the planetary mission entry vehicle document. Three new missions, Re-entry F, Hayabusa, and ARD have been added to t he previously published edition (Version 2.1). In addition, the Huyge ns mission has been significantly updated and some Apollo data correc ted. Due to the changing nature of planetary vehicles during the desi gn, manufacture and mission phases, and to the variables involved in measurement and computation, please be aware that the data provided h erein cannot be guaranteed. Contact Carol Davies at cdavies@mail.arc. nasa.gov to correct or update the current data, or to suggest other missions.

  13. Weather and Climate Monitoring Protocol, Channel Islands National Park, California

    USGS Publications Warehouse

    McEachern, Kathryn; Power, Paula; Dye, Linda; Rudolph, Rocky

    2008-01-01

    Weather and climate are strong drivers of population dynamics, plant and animal spatial distributions, community interactions, and ecosystem states. Information on local weather and climate is crucial in interpreting trends and patterns in the natural environment for resource management, research, and visitor enjoyment. This document describes the weather and climate monitoring program at the Channel Islands National Park (fig. 1), initiated in the 1990s. Manual and automated stations, which continue to evolve as technology changes, are being used for this program. The document reviews the history of weather data collection on each of the five Channel Islands National Park islands, presents program administrative structure, and provides an overview of procedures for data collection, archival, retrieval, and reporting. This program overview is accompanied by the 'Channel Islands National Park Remote Automated Weather Station Field Handbook' and the 'Channel Islands National Park Ranger Weather Station Field Handbook'. These Handbooks are maintained separately at the Channel Island National Park as 'live documents' that are updated as needed to provide a current working manual of weather and climate monitoring procedures. They are available on request from the Weather Program Manager (Channel Islands National Park, 1901 Spinnaker Dr., Ventura, CA 93001; 805.658.5700). The two Field Handbooks describe in detail protocols for managing the four remote automated weather stations (RAWS) and the seven manual Ranger Weather Stations on the islands, including standard operating procedures for equipment maintenance and calibration; manufacturer operating manuals; data retrieval and archiving; metada collection and archival; and local, agency, and vendor contracts.

  14. 40 CFR 68.190 - Updates.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 15 2011-07-01 2011-07-01 false Updates. 68.190 Section 68.190 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Risk Management Plan § 68.190 Updates. (a) The owner or operator shall...

  15. 40 CFR 68.190 - Updates.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Updates. 68.190 Section 68.190 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Risk Management Plan § 68.190 Updates. (a) The owner or operator shall...

  16. Kennedy Space Center Director Update

    NASA Image and Video Library

    2014-03-06

    CAPE CANAVERAL, Fla. - Community leaders, business executives, educators, and state and local government leaders were updated on NASA Kennedy Space Center programs and accomplishments during KSC Center Director Bob Cabana’s Center Director Update at the Debus Center at the Kennedy Space Center Visitor Complex in Florida. Attendees talked with Cabana and other senior Kennedy managers and visited displays featuring updates on Kennedy programs and projects, including International Space Station, Commercial Crew, Ground System Development and Operations, Launch Services, Center Planning and Development, Technology, KSC Swamp Works and NASA Education. The morning concluded with a tour of the new Space Shuttle Atlantis exhibit at the visitor complex. For more information, visit http://www.nasa.gov/kennedy. Photo credit: NASA/Daniel Casper

  17. Kennedy Space Center Director Update

    NASA Image and Video Library

    2014-03-06

    CAPE CANAVERAL, Fla. - Community leaders, business executives, educators, and state and local government leaders were updated on NASA Kennedy Space Center programs and accomplishments during Center Director Bob Cabana’s Center Director Update at the Debus Center at the Kennedy Space Center Visitor Complex in Florida. Attendees talked with Cabana and other senior Kennedy managers and visited displays featuring updates on Kennedy programs and projects, including International Space Station, Commercial Crew, Ground System Development and Operations, Launch Services, Center Planning and Development, Technology, KSC Swamp Works and NASA Education. The morning concluded with a tour of the new Space Shuttle Atlantis exhibit at the visitor complex. For more information, visit http://www.nasa.gov/kennedy. Photo credit: NASA/Daniel Casper

  18. Human Factors Engineering Program Review Model (NUREG-0711)Revision 3: Update Methodology and Key Revisions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    OHara J. M.; Higgins, J.; Fleger, S.

    The U.S. Nuclear Regulatory Commission (NRC) reviews the human factors engineering (HFE) programs of applicants for nuclear power plant construction permits, operating licenses, standard design certifications, and combined operating licenses. The purpose of these safety reviews is to help ensure that personnel performance and reliability are appropriately supported. Detailed design review procedures and guidance for the evaluations is provided in three key documents: the Standard Review Plan (NUREG-0800), the HFE Program Review Model (NUREG-0711), and the Human-System Interface Design Review Guidelines (NUREG-0700). These documents were last revised in 2007, 2004 and 2002, respectively. The NRC is committed to the periodicmore » update and improvement of the guidance to ensure that it remains a state-of-the-art design evaluation tool. To this end, the NRC is updating its guidance to stay current with recent research on human performance, advances in HFE methods and tools, and new technology being employed in plant and control room design. NUREG-0711 is the first document to be addressed. We present the methodology used to update NUREG-0711 and summarize the main changes made. Finally, we discuss the current status of the update program and the future plans.« less

  19. The Impact of Intrapreneurial Programs on Fortune 500 Manufacturing Firms.

    ERIC Educational Resources Information Center

    Marcus, Melissa H.; Tesolowski, Dennis G.; Isbell, Clinton H.

    2000-01-01

    A survey of 100 manufacturing firms in 10 Standard Industrial Classification areas found that intrapreneurial programs did not significantly affect sales, profits, or returns to investors. Electronics and computer companies and the most dominant intrapreneurial programs. (SK)

  20. Constellation Program Update

    NASA Image and Video Library

    2006-06-04

    NASA Administrator Michael Griffin is seen through a television camera at a NASA Update announcing to NASA employees and members of the media the responsibilities of the NASA centers associated with the Constellation Program for robotic and human Moon and Mars exploration on Wednesday, June 5, 2006, at NASA Headquarters in Washington. Griffin was joined by Scott J. Horowitz, NASA Associate Administrator for Exploration Systems and Jeff Hanley, Constellation Program Manager, right. Dean Acosta, NASA Deputy Assistant Administrator and Press Secretary, far left, moderates the program. Photo Credit: (NASA/Bill Ingalls)

  1. GSD Update: Year in Review: Spotlight on 2017 Research by the Grassland, Shrubland and Desert Ecosystems Science Program

    Treesearch

    Deborah M. Finch

    2018-01-01

    In this issue of the GSD Update, we feature selected studies of the RMRS Grassland, Shrubland and Desert Ecosystems Science Program (GSD) that focus on the theme of fire. Significant results of recent research and science delivery by GSD scientists are highlighted. We feature program research that lines up with the strategic priorities and goals of the USDA Forest...

  2. GSD Update: Year in Review: Spotlight on 2016 Research by the Grassland, Shrubland and Desert Ecosystems Science Program

    Treesearch

    Deborah M. Finch

    2017-01-01

    In this issue of the GSD Update, we take a look back at selected studies of the Grassland, Shrubland and Desert Ecosystems Science Program (GSD) that depict its strengths and focus areas. Significant results of recent research and science delivery by GSD scientists are highlighted. We feature program research that lines up with the strategic priorities of the USDA...

  3. GSD Update: Year in Review: Spotlight on 2013 research by the Grassland, Shrubland and Desert Ecosystems Science Program

    Treesearch

    Deborah M. Finch

    2014-01-01

    In this issue of the GSD Update, we take a look back at selected studies of the Grassland, Shrubland and Desert Ecosystems Science Program (GSD) that depict its strengths and focus areas. Significant results of recent research and science delivery by GSD scientists are highlighted. We feature program research that lines up with the strategic research priorities of the...

  4. GSD Update: Year in Review: Spotlight on 2014 Research by the Grassland, Shrubland and Desert Ecosystems Science Program

    Treesearch

    Deborah Finch; David Hawksworth

    2015-01-01

    In this issue of the GSD Update, we take a look back at selected studies of the Grassland, Shrubland and Desert Ecosystems Science Program (GSD) that depict its strengths and focus areas. Significant results of recent research and science delivery by GSD scientists are highlighted. We feature program research that lines up with the strategic research priorities of the...

  5. GSD Update: Year in Review: Spotlight on 2012 Research by the Grassland, Shrubland and Desert Ecosystems Science Program

    Treesearch

    Deborah M. Finch

    2013-01-01

    In this issue of the GSD Update, we take a look back at selected studies of the Grassland, Shrubland and Desert Ecosystem Science Program (GSD) that depict its strengths and focus areas. Significant results of recent research and science applications by GSD scientists are highlighted. We identify where program research lines up with the strategic priorities of the USDA...

  6. Second COS FUV Lifetime Position: FUV Target Acquisition Parameter Update {FENA4}

    NASA Astrophysics Data System (ADS)

    Penton, Steven

    2011-10-01

    Verify the ability of the Cycle 20 COS FSW to place an isolated point source at the center of the PSA, using FUV dispersed light target acquisition {TA} from the object and all three FUV gratings at the Second Lifetime Position {SLP}. This program is modeled from the activity summary of FENA4.This program should be executed after the new HV, XD spectral positions, and focus are determined and updated. In addition, the LIFETIME=ALTERNATE TA FSW parameters should be updated prior to execution of this program.NUV imaging TAs have previously been used to determine the correct locations for FUV spectra. We follow the same procedure here.

  7. An Analysis of National Surveys: Associate Degree Programs in Manufacturing Engineering and Related Programs. A Preliminary Report.

    ERIC Educational Resources Information Center

    Mathias, Elizabeth A.

    In 1993, a study was conducted to investigate the responses of associate degree programs in manufacturing and related technical programs to current technical education initiatives. The study focused on the relationships of associate degree programs to secondary and postsecondary education and industry, curricular trends, familiarity with the…

  8. Intelligent Processing Equipment Developments Within the Navy's Manufacturing Technology Centers of Excellence

    NASA Technical Reports Server (NTRS)

    Nanzetta, Philip

    1992-01-01

    The U.S. Navy has had an active Manufacturing Technology (MANTECH) Program aimed at developing advanced production processes and equipment since the late-1960's. During the past decade, however, the resources of the MANTECH program were concentrated in Centers of Excellence. Today, the Navy sponsors four manufacturing technology Centers of Excellence: the Automated Manufacturing Research Facility (AMRF); the Electronics Manufacturing Productivity Facility (EMPF); the National Center for Excellence in Metalworking Technology (NCEMT); and the Center of Excellence for Composites Manufacturing Technology (CECMT). This paper briefly describes each of the centers and summarizes typical Intelligent Equipment Processing (IEP) projects that were undertaken.

  9. 10 CFR 26.57 - Authorization update.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 1 2013-01-01 2013-01-01 false Authorization update. 26.57 Section 26.57 Energy NUCLEAR REGULATORY COMMISSION FITNESS FOR DUTY PROGRAMS Granting and Maintaining Authorization § 26.57 Authorization update. (a) Before granting authorization to an individual whose authorization has been interrupted for...

  10. 10 CFR 26.57 - Authorization update.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 1 2014-01-01 2014-01-01 false Authorization update. 26.57 Section 26.57 Energy NUCLEAR REGULATORY COMMISSION FITNESS FOR DUTY PROGRAMS Granting and Maintaining Authorization § 26.57 Authorization update. (a) Before granting authorization to an individual whose authorization has been interrupted for...

  11. 10 CFR 26.57 - Authorization update.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 1 2012-01-01 2012-01-01 false Authorization update. 26.57 Section 26.57 Energy NUCLEAR REGULATORY COMMISSION FITNESS FOR DUTY PROGRAMS Granting and Maintaining Authorization § 26.57 Authorization update. (a) Before granting authorization to an individual whose authorization has been interrupted for...

  12. 10 CFR 26.57 - Authorization update.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 1 2011-01-01 2011-01-01 false Authorization update. 26.57 Section 26.57 Energy NUCLEAR REGULATORY COMMISSION FITNESS FOR DUTY PROGRAMS Granting and Maintaining Authorization § 26.57 Authorization update. (a) Before granting authorization to an individual whose authorization has been interrupted for...

  13. 10 CFR 26.57 - Authorization update.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Authorization update. 26.57 Section 26.57 Energy NUCLEAR REGULATORY COMMISSION FITNESS FOR DUTY PROGRAMS Granting and Maintaining Authorization § 26.57 Authorization update. (a) Before granting authorization to an individual whose authorization has been interrupted for...

  14. 78 FR 6289 - Sunshine Act Notice

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-30

    ... COMMISSION ON CIVIL RIGHTS Sunshine Act Notice AGENCY: United States Commission on Civil Rights.... Program Planning Update on the Sex Trafficking: A Gender-Based Violation of Civil Rights briefing Update on the Federal Civil Rights Engagement with Arab & Muslim Communities Post 9/11 briefing Update on...

  15. NPP/NPOESS Status

    NASA Astrophysics Data System (ADS)

    Stockton, D.

    2009-12-01

    In this presentation, the NPOESS Integrated Program Office will provide a status update on the NPOESS Preparatory Project (NPP) and the NPOESS program. This update will include information on sensors, data products, and the spacecraft as well as the current schedules for NPP and NPOESS. The presentation will also touch on cooperation with EUMETSAT, both current and future.

  16. Update on Research and Leadership, Fall 2001-Spring 2002.

    ERIC Educational Resources Information Center

    Barnett, Elisabeth, Ed.

    2001-01-01

    This issue of On Research and Leadership Update (v13 n1) focuses on the concerns surrounding dual enrollment and dual credit. "Dual Enrollment Programs: Assessing the American Dream," by Katherine Boswell, addresses the problems inherent in development of these programs when institutions fail to collaborate with one another in an effective way.…

  17. 42 CFR 495.340 - As-needed HIT PAPD update and as-needed HIT IAPD update requirements.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM Requirements Specific to the Medicaid Program § 495.340 As... document or the HIT implementation advance planning document. (d) A change in implementation concept or a change to the scope of the project. (e) A change to the approved cost allocation methodology. ...

  18. 42 CFR 495.340 - As-needed HIT PAPD update and as-needed HIT IAPD update requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... HEALTH RECORD TECHNOLOGY INCENTIVE PROGRAM Requirements Specific to the Medicaid Program § 495.340 As... document or the HIT implementation advance planning document. (d) A change in implementation concept or a change to the scope of the project. (e) A change to the approved cost allocation methodology. ...

  19. 76 FR 61074 - Reports and Updates on Arctic Research Programs and Projects; Meetings

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-03

    ... UNITED STATES ARCTIC RESEARCH COMMISSION Reports and Updates on Arctic Research Programs and Projects; Meetings Notice is hereby given that the US Arctic Research Commission will hold its 96th meeting... about topics of interest related to research activities in the Arctic. 96th Meeting Schedule: Wed., Oct...

  20. Sodium monitoring in commercially processed and restaurant foods.

    PubMed

    Ahuja, Jaspreet K C; Pehrsson, Pamela R; Haytowitz, David B; Wasswa-Kintu, Shirley; Nickle, Melissa; Showell, Bethany; Thomas, Robin; Roseland, Janet; Williams, Juhi; Khan, Mona; Nguyen, Quynhanh; Hoy, Kathy; Martin, Carrie; Rhodes, Donna; Moshfegh, Alanna; Gillespie, Cathleen; Gunn, Janelle; Merritt, Robert; Cogswell, Mary

    2015-03-01

    Most sodium in the US diet comes from commercially processed and restaurant foods. Sodium reduction in these foods is key to several recent public health efforts. The objective was to provide an overview of a program led by the USDA, in partnership with other government agencies, to monitor sodium contents in commercially processed and restaurant foods in the United States. We also present comparisons of nutrients generated under the program to older data. We track ∼125 commercially processed and restaurant food items ("sentinel foods") annually using information from food manufacturers and periodically by nationwide sampling and laboratory analyses. In addition, we monitor >1100 other commercially processed and restaurant food items, termed "priority-2 foods" (P2Fs) biennially by using information from food manufacturers. These foods serve as indicators for assessing changes in the sodium content of commercially processed and restaurant foods in the United States. We sampled all sentinel foods nationwide and reviewed all P2Fs in 2010-2013 to determine baseline sodium concentrations. We updated sodium values for 73 sentinel foods and 551 P2Fs in the USDA's National Nutrient Database for Standard Reference (releases 23-26). Sodium values changed by at least 10% for 43 of the sentinel foods, which, for 31 foods, including commonly consumed foods such as bread, tomato catsup, and potato chips, the newer sodium values were lower. Changes in the concentrations of related nutrients (total and saturated fat, total sugar, potassium, or dietary fiber) that were recommended by the 2010 Dietary Guidelines for Americans for reduced or increased consumption accompanied sodium reduction. The results of sodium reduction efforts, based on resampling of the sentinel foods or re-review of P2Fs, will become available beginning in 2015. This monitoring program tracks sodium reduction efforts, improves food composition databases, and strengthens national nutrition monitoring. © 2015 American Society for Nutrition.

  1. Sodium monitoring in commercially processed and restaurant foods

    PubMed Central

    Ahuja, Jaspreet KC; Pehrsson, Pamela R; Haytowitz, David B; Wasswa-Kintu, Shirley; Nickle, Melissa; Showell, Bethany; Thomas, Robin; Roseland, Janet; Williams, Juhi; Khan, Mona; Nguyen, Quynhanh; Hoy, Kathy; Martin, Carrie; Rhodes, Donna; Moshfegh, Alanna; Gillespie, Cathleen; Gunn, Janelle; Merritt, Robert; Cogswell, Mary

    2015-01-01

    Background Most sodium in the US diet comes from commercially processed and restaurant foods. Sodium reduction in these foods is key to several recent public health efforts. Objective The objective was to provide an overview of a program led by the USDA, in partnership with other government agencies, to monitor sodium contents in commercially processed and restaurant foods in the United States. We also present comparisons of nutrients generated under the program to older data. Design We track ∼125 commercially processed and restaurant food items (“sentinel foods”) annually using information from food manufacturers and periodically by nationwide sampling and laboratory analyses. In addition, we monitor >1100 other commercially processed and restaurant food items, termed “priority-2 foods” (P2Fs) biennially by using information from food manufacturers. These foods serve as indicators for assessing changes in the sodium content of commercially processed and restaurant foods in the United States. We sampled all sentinel foods nationwide and reviewed all P2Fs in 2010–2013 to determine baseline sodium concentrations. Results We updated sodium values for 73 sentinel foods and 551 P2Fs in the USDA’s National Nutrient Database for Standard Reference (releases 23–26). Sodium values changed by at least 10% for 43 of the sentinel foods, which, for 31 foods, including commonly consumed foods such as bread, tomato catsup, and potato chips, the newer sodium values were lower. Changes in the concentrations of related nutrients (total and saturated fat, total sugar, potassium, or dietary fiber) that were recommended by the 2010 Dietary Guidelines for Americans for reduced or increased consumption accompanied sodium reduction. The results of sodium reduction efforts, based on resampling of the sentinel foods or re-review of P2Fs, will become available beginning in 2015. Conclusion This monitoring program tracks sodium reduction efforts, improves food composition databases, and strengthens national nutrition monitoring. PMID:25733648

  2. [Introduction of vaccination against human papillomavirus in developing countries: update and perspectives].

    PubMed

    Hessel, L

    2009-08-01

    Cervical cancer and other diseases related to human papillomavirus (HPV) represent a global public health problem. Safe and effective vaccines are now available and already used in many industrialized countries. Immunization offers the best hope for protecting the population against a disease that is the second most deadly cancer in the developing world and the first most deadly in Africa. The World Health Organization currently recommends introduction of HVP vaccination in developing countries. Widespread vaccination could be beneficial in numerous domains other than primary prevention of cervical cancer. Efforts to overcome the numerous obstacles and speed up implementation of HVP vaccination programs are now underway in many areas ranging from related scientific issues such as epidemiology and clinical research to administrative concerns such as healthcare economics, vaccination guidelines, public acceptation, program funding, and universal access. Vaccine manufacturers have committed themselves to working in partnership with national and international organizations to ensure access to HPV vaccine for all countries regardless of economic level, Although numerous issues must be resolved to optimize the use of HPV vaccines and ensure synergistic integration of vaccination, screening and treatment, current initiatives and efforts should allow introduction of HPV vaccination in developing countries in a not too distant future.

  3. Jobs and Renewable Energy Project

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sterzinger, George

    2006-12-19

    Early in 2002, REPP developed the Jobs Calculator, a tool that calculates the number of direct jobs resulting from renewable energy development under RPS (Renewable Portfolio Standard) legislation or other programs to accelerate renewable energy development. The calculator is based on a survey of current industry practices to assess the number and type of jobs that will result from the enactment of a RPS. This project built upon and significantly enhanced the initial Jobs Calculator model by (1) expanding the survey to include other renewable technologies (the original model was limited to wind, solar PV and biomass co-firing technologies); (2)more » more precisely calculating the economic development benefits related to renewable energy development; (3) completing and regularly updating the survey of the commercially active renewable energy firms to determine kinds and number of jobs directly created; and (4) developing and implementing a technology to locate where the economic activity related to each type of renewable technology is likely to occur. REPP worked directly with groups in the State of Nevada to interpret the results and develop policies to capture as much of the economic benefits as possible for the state through technology selection, training program options, and outreach to manufacturing groups.« less

  4. 15 CFR 290.3 - Program description.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE TRANSFER OF MANUFACTURING TECHNOLOGY § 290.3 Program description. (a) The Secretary, acting through the... for the Transfer of Manufacturing Technology. Each Center shall be affiliated with a U.S.-based...

  5. 15 CFR 290.3 - Program description.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE TRANSFER OF MANUFACTURING TECHNOLOGY § 290.3 Program description. (a) The Secretary, acting through the... for the Transfer of Manufacturing Technology. Each Center shall be affiliated with a U.S.-based...

  6. 75 FR 71669 - Sunshine Act Notice

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-24

    .... Approval of Agenda. II. Program Planning. Approval of School Choice, the Blaine Amendments and Anti.... Update on FY 2011 Cy Pres Enforcement Report. Update on Status of Briefing on Disparate Impact in School Discipline Policies. Update on Sex Discrimination in Liberal Arts College Admissions--Some of the discussion...

  7. 40 CFR 68.36 - Review and update.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 15 2011-07-01 2011-07-01 false Review and update. 68.36 Section 68.36 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Hazard Assessment § 68.36 Review and update. (a) The owner or operator shall...

  8. 40 CFR 68.36 - Review and update.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 16 2012-07-01 2012-07-01 false Review and update. 68.36 Section 68.36 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Hazard Assessment § 68.36 Review and update. (a) The owner or operator shall...

  9. 40 CFR 68.36 - Review and update.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 16 2013-07-01 2013-07-01 false Review and update. 68.36 Section 68.36 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Hazard Assessment § 68.36 Review and update. (a) The owner or operator shall...

  10. 40 CFR 68.36 - Review and update.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 16 2014-07-01 2014-07-01 false Review and update. 68.36 Section 68.36 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Hazard Assessment § 68.36 Review and update. (a) The owner or operator shall...

  11. 76 FR 3637 - Annual Update of the HHS Poverty Guidelines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-20

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Office of the Secretary Annual Update of the HHS Poverty... update of the Department of Health and Human Services (HHS) poverty guidelines to account for last... program. For information about poverty figures for immigration forms, the Hill-Burton Uncompensated...

  12. 77 FR 4034 - Annual Update of the HHS Poverty Guidelines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-26

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Office of the Secretary Annual Update of the HHS Poverty... update of the Department of Health and Human Services (HHS) poverty guidelines to account for last... program. For information about poverty figures for immigration forms, the Hill-Burton Uncompensated...

  13. 78 FR 5182 - Annual Update of the HHS Poverty Guidelines

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-24

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Office of the Secretary Annual Update of the HHS Poverty... update of the Department of Health and Human Services (HHS) poverty guidelines to account for last... program. For information about poverty figures for immigration forms, the Hill-Burton Uncompensated...

  14. Opportunities for Success: Cost Effective Programs for Children Update, 1988. A Report of the Select Committee on Children, Youth and Families, U.S. House of Representatives, One Hundredth Congress, Second Session.

    ERIC Educational Resources Information Center

    Congress of the U.S., Washington, DC. House Select Committee on Children, Youth, and Families.

    Based on findings of the most current and highly regarded evaluations and research reviews available, this committee print provides an update of a prior committee report (August, 1985) on eight cost-effective federal programs for children. Described in terms of program participation, characteristics, benefits for children, cost effectiveness, and…

  15. Updating a Searchable Database of Dropout Prevention Programs and Policies in Nine Low-Income Urban School Districts in the Northeast and Islands Region. REL Technical Brief. REL 2012-No. 020

    ERIC Educational Resources Information Center

    Myint-U, Athi; O'Donnell, Lydia; Phillips, Dawna

    2012-01-01

    This technical brief describes updates to a database of dropout prevention programs and policies in 2006/07 created by the Regional Education Laboratory (REL) Northeast and Islands and described in the Issues & Answers report, "Piloting a searchable database of dropout prevention programs in nine low-income urban school districts in the…

  16. Onsite 40-kilowatt fuel cell power plant manufacturing and field test program

    NASA Technical Reports Server (NTRS)

    1985-01-01

    A joint Gas Research Institute and U.S. Department of Energy Program was initiated in 1982 to evaluate the use of fuel cell power systems for on-site energy service. Forty-six 40 kW fuel cell power plants were manufactured at the United Technologies Corporation facility in South Windsor, Connecticut, and are being delivered to host utilities and other program participants in the United States and Japan for field testing. The construction of the 46 fully-integrated power plants was completed in January 1985 within the constraints of the contract plan. The program has provided significant experience in the manufacture, acceptance testing, deployment, and support of on-site fuel cell systems. Initial field test results also show that these experimental power plants meet the performance and environmental requirements of a commercial specification. This Interim Report encompasses the design and manufacturing phases of the 40 kW Power Plant Manufacturing and Field Test program. The contract between UTC and NASA also provides UTC field engineering support to the host utilities, training programs and associated manuals for utility operating and maintenance personnel, spare parts support for a defined test period, and testing at UTC of a power plant made available from a preceding program phase. These activities are ongoing and will be reported subsequently.

  17. 77 FR 35279 - Approval and Promulgation of Implementation Plans; Arizona; Update to Stage II Gasoline Vapor...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-13

    ... because the exemptions as applied to the race cars themselves and to marine and aircraft refueling... evaporative emissions captured, as in the cases of late model rental cars refueling at rental car facilities and newly manufactured cars being fueled for the first time at automobile assembly plants. Table 1...

  18. Manufacturing Educational Change: Impact Evaluation of the Lansing Area Manufacturing Partnership Pilot Program. Executive Summary.

    ERIC Educational Resources Information Center

    MacAllum, Keith; Taylor, Susan Hubbard; Johnson, Amy Bell

    The Lansing Area Manufacturing Partnership (LAMP) is an academically rigorous, business/labor-driven school-to-career program in Lansing, Michigan, that includes business, union, school, and parent partners and provides participating students with work-based learning experiences for 2.5 hours every day throughout their senior year. LAMP's…

  19. TU-A-18C-01: ACR Accreditation Updates in CT, Ultrasound, Mammography and MRI

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Price, R; Berns, E; Hangiandreou, N

    2014-06-15

    A goal of an imaging accreditation program is to ensure adequate image quality, verify appropriate staff qualifications, and to assure patient and personnel safety. Currently, more than 35,000 facilities in 10 modalities have been accredited by the American College of Radiology (ACR), making the ACR program one of the most prolific accreditation options in the U.S. In addition, the ACR is one of the accepted accreditations required by some state laws, CMS/MIPPA insurance and others. Familiarity with the ACR accreditation process is therefore essential to clinical diagnostic medical physicists. Maintaining sufficient knowledge of the ACR program must include keeping up-to-datemore » as the various modality requirements are refined to better serve the goals of the program and to accommodate newer technologies and practices. This session consists of presentations from authorities in four ACR accreditation modality programs, including magnetic resonance imaging, mammography, ultrasound, and computed tomography. Each speaker will discuss the general components of the modality program and address any recent changes to the requirements. Learning Objectives: To understand the requirements of the ACR MR accreditation program. The discussion will include accreditation of whole-body general purpose magnets, dedicated extremity systems well as breast MRI accreditation. Anticipated updates to the ACR MRI Quality Control Manual will also be reviewed. To understand the current ACR MAP Accreditation requirement and present the concepts and structure of the forthcoming ACR Digital Mammography QC Manual and Program. To understand the new requirements of the ACR ultrasound accreditation program, and roles the physicist can play in annual equipment surveys and setting up and supervising the routine QC program. To understand the requirements of the ACR CT accreditation program, including updates to the QC manual as well as updates through the FAQ process.« less

  20. MO-AB-207-02: ACR Update in MR

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Price, R.

    2015-06-15

    A goal of an imaging accreditation program is to ensure adequate image quality, verify appropriate staff qualifications, and to assure patient and personnel safety. Currently, more than 35,000 facilities in 10 modalities have been accredited by the American College of Radiology (ACR), making the ACR program one of the most prolific accreditation options in the U.S. In addition, ACR is one of the accepted accreditations required by some state laws, CMS/MIPPA insurance and others. Familiarity with the ACR accreditation process is therefore essential to clinical diagnostic medical physicists. Maintaining sufficient knowledge of the ACR program must include keeping up-to-date asmore » the various modality requirements are refined to better serve the goals of the program and to accommodate newer technologies and practices. This session consists of presentations from authorities in four ACR accreditation modality programs, including magnetic resonance imaging, computed tomography, nuclear medicine, and mammography. Each speaker will discuss the general components of the modality program and address any recent changes to the requirements. Learning Objectives: To understand the requirements of the ACR MR Accreditation program. The discussion will include accreditation of whole-body general purpose magnets, dedicated extremity systems well as breast MRI accreditation. Anticipated updates to the ACR MRI Quality Control Manual will also be reviewed. To understand the requirements of the ACR CT accreditation program, including updates to the QC manual as well as updates through the FAQ process. To understand the requirements of the ACR nuclear medicine accreditation program, and the role of the physicist in annual equipment surveys and the set up and supervision of the routine QC program. To understand the current ACR MAP Accreditation requirement and present the concepts and structure of the forthcoming ACR Digital Mammography QC Manual and Program.« less

  1. MO-AB-207-04: ACR Update in Mammography

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Berns, E.

    2015-06-15

    A goal of an imaging accreditation program is to ensure adequate image quality, verify appropriate staff qualifications, and to assure patient and personnel safety. Currently, more than 35,000 facilities in 10 modalities have been accredited by the American College of Radiology (ACR), making the ACR program one of the most prolific accreditation options in the U.S. In addition, ACR is one of the accepted accreditations required by some state laws, CMS/MIPPA insurance and others. Familiarity with the ACR accreditation process is therefore essential to clinical diagnostic medical physicists. Maintaining sufficient knowledge of the ACR program must include keeping up-to-date asmore » the various modality requirements are refined to better serve the goals of the program and to accommodate newer technologies and practices. This session consists of presentations from authorities in four ACR accreditation modality programs, including magnetic resonance imaging, computed tomography, nuclear medicine, and mammography. Each speaker will discuss the general components of the modality program and address any recent changes to the requirements. Learning Objectives: To understand the requirements of the ACR MR Accreditation program. The discussion will include accreditation of whole-body general purpose magnets, dedicated extremity systems well as breast MRI accreditation. Anticipated updates to the ACR MRI Quality Control Manual will also be reviewed. To understand the requirements of the ACR CT accreditation program, including updates to the QC manual as well as updates through the FAQ process. To understand the requirements of the ACR nuclear medicine accreditation program, and the role of the physicist in annual equipment surveys and the set up and supervision of the routine QC program. To understand the current ACR MAP Accreditation requirement and present the concepts and structure of the forthcoming ACR Digital Mammography QC Manual and Program.« less

  2. MO-AB-207-01: ACR Update in CT

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McNitt-Gray, M.

    2015-06-15

    A goal of an imaging accreditation program is to ensure adequate image quality, verify appropriate staff qualifications, and to assure patient and personnel safety. Currently, more than 35,000 facilities in 10 modalities have been accredited by the American College of Radiology (ACR), making the ACR program one of the most prolific accreditation options in the U.S. In addition, ACR is one of the accepted accreditations required by some state laws, CMS/MIPPA insurance and others. Familiarity with the ACR accreditation process is therefore essential to clinical diagnostic medical physicists. Maintaining sufficient knowledge of the ACR program must include keeping up-to-date asmore » the various modality requirements are refined to better serve the goals of the program and to accommodate newer technologies and practices. This session consists of presentations from authorities in four ACR accreditation modality programs, including magnetic resonance imaging, computed tomography, nuclear medicine, and mammography. Each speaker will discuss the general components of the modality program and address any recent changes to the requirements. Learning Objectives: To understand the requirements of the ACR MR Accreditation program. The discussion will include accreditation of whole-body general purpose magnets, dedicated extremity systems well as breast MRI accreditation. Anticipated updates to the ACR MRI Quality Control Manual will also be reviewed. To understand the requirements of the ACR CT accreditation program, including updates to the QC manual as well as updates through the FAQ process. To understand the requirements of the ACR nuclear medicine accreditation program, and the role of the physicist in annual equipment surveys and the set up and supervision of the routine QC program. To understand the current ACR MAP Accreditation requirement and present the concepts and structure of the forthcoming ACR Digital Mammography QC Manual and Program.« less

  3. MO-AB-207-00: ACR Update in MR, CT, Nuclear Medicine, and Mammography

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    A goal of an imaging accreditation program is to ensure adequate image quality, verify appropriate staff qualifications, and to assure patient and personnel safety. Currently, more than 35,000 facilities in 10 modalities have been accredited by the American College of Radiology (ACR), making the ACR program one of the most prolific accreditation options in the U.S. In addition, ACR is one of the accepted accreditations required by some state laws, CMS/MIPPA insurance and others. Familiarity with the ACR accreditation process is therefore essential to clinical diagnostic medical physicists. Maintaining sufficient knowledge of the ACR program must include keeping up-to-date asmore » the various modality requirements are refined to better serve the goals of the program and to accommodate newer technologies and practices. This session consists of presentations from authorities in four ACR accreditation modality programs, including magnetic resonance imaging, computed tomography, nuclear medicine, and mammography. Each speaker will discuss the general components of the modality program and address any recent changes to the requirements. Learning Objectives: To understand the requirements of the ACR MR Accreditation program. The discussion will include accreditation of whole-body general purpose magnets, dedicated extremity systems well as breast MRI accreditation. Anticipated updates to the ACR MRI Quality Control Manual will also be reviewed. To understand the requirements of the ACR CT accreditation program, including updates to the QC manual as well as updates through the FAQ process. To understand the requirements of the ACR nuclear medicine accreditation program, and the role of the physicist in annual equipment surveys and the set up and supervision of the routine QC program. To understand the current ACR MAP Accreditation requirement and present the concepts and structure of the forthcoming ACR Digital Mammography QC Manual and Program.« less

  4. MO-AB-207-03: ACR Update in Nuclear Medicine

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Harkness, B.

    A goal of an imaging accreditation program is to ensure adequate image quality, verify appropriate staff qualifications, and to assure patient and personnel safety. Currently, more than 35,000 facilities in 10 modalities have been accredited by the American College of Radiology (ACR), making the ACR program one of the most prolific accreditation options in the U.S. In addition, ACR is one of the accepted accreditations required by some state laws, CMS/MIPPA insurance and others. Familiarity with the ACR accreditation process is therefore essential to clinical diagnostic medical physicists. Maintaining sufficient knowledge of the ACR program must include keeping up-to-date asmore » the various modality requirements are refined to better serve the goals of the program and to accommodate newer technologies and practices. This session consists of presentations from authorities in four ACR accreditation modality programs, including magnetic resonance imaging, computed tomography, nuclear medicine, and mammography. Each speaker will discuss the general components of the modality program and address any recent changes to the requirements. Learning Objectives: To understand the requirements of the ACR MR Accreditation program. The discussion will include accreditation of whole-body general purpose magnets, dedicated extremity systems well as breast MRI accreditation. Anticipated updates to the ACR MRI Quality Control Manual will also be reviewed. To understand the requirements of the ACR CT accreditation program, including updates to the QC manual as well as updates through the FAQ process. To understand the requirements of the ACR nuclear medicine accreditation program, and the role of the physicist in annual equipment surveys and the set up and supervision of the routine QC program. To understand the current ACR MAP Accreditation requirement and present the concepts and structure of the forthcoming ACR Digital Mammography QC Manual and Program.« less

  5. 10 CFR 474.5 - Review and Update

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 3 2014-01-01 2014-01-01 false Review and Update 474.5 Section 474.5 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ELECTRIC AND HYBRID VEHICLE RESEARCH, DEVELOPMENT, AND DEMONSTRATION PROGRAM; PETROLEUM-EQUIVALENT FUEL ECONOMY CALCULATION § 474.5 Review and Update The Department will review part 474...

  6. 10 CFR 474.5 - Review and Update

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 3 2012-01-01 2012-01-01 false Review and Update 474.5 Section 474.5 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ELECTRIC AND HYBRID VEHICLE RESEARCH, DEVELOPMENT, AND DEMONSTRATION PROGRAM; PETROLEUM-EQUIVALENT FUEL ECONOMY CALCULATION § 474.5 Review and Update The Department will review part 474...

  7. 10 CFR 474.5 - Review and Update

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 3 2013-01-01 2013-01-01 false Review and Update 474.5 Section 474.5 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ELECTRIC AND HYBRID VEHICLE RESEARCH, DEVELOPMENT, AND DEMONSTRATION PROGRAM; PETROLEUM-EQUIVALENT FUEL ECONOMY CALCULATION § 474.5 Review and Update The Department will review part 474...

  8. 10 CFR 474.5 - Review and Update

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 3 2011-01-01 2011-01-01 false Review and Update 474.5 Section 474.5 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ELECTRIC AND HYBRID VEHICLE RESEARCH, DEVELOPMENT, AND DEMONSTRATION PROGRAM; PETROLEUM-EQUIVALENT FUEL ECONOMY CALCULATION § 474.5 Review and Update The Department will review Part 474...

  9. 10 CFR 474.5 - Review and Update

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Review and Update 474.5 Section 474.5 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ELECTRIC AND HYBRID VEHICLE RESEARCH, DEVELOPMENT, AND DEMONSTRATION PROGRAM; PETROLEUM-EQUIVALENT FUEL ECONOMY CALCULATION § 474.5 Review and Update The Department will review Part 474...

  10. Update to An Inventory of Sources and Environmental ...

    EPA Pesticide Factsheets

    In 2006, EPA published an inventory of sources and environmental releases of dioxin-like compounds in the United States. This draft report presents an update and revision to that dioxin source inventory. It also presents updated estimates of environmental releases of dioxin-like compounds to the air, water, land and products. The sources are grouped into five broad categories: combustion sources, metals smelting/refining, chemical manufacturing, natural sources, and environmental reservoirs. Estimates of annual releases to land, air, and water are presented for reference years 1987, 1995, and 2000. While the overall decreasing trend in emissions seen in the original report continues, the individual dioxin releases in this draft updated report are generally higher than the values reported in 2006. This is largely due to the inclusion (in all three years) of additional sources in the quantitative inventory that were not included in the 2006 report. The largest new source included in this draft updated inventory was forest fires. In the 2006 report, this was classified as preliminary and not included in the quantitative inventory. The top three air sources of dioxin emissions in 2000 were forest fires, backyard burning of trash, and medical waste incinerators. The Report Presents An Update To The Dioxin Source Inventory Published In 2006 (U.S. Epa, 2006). The Peer-Review Panel For The 2006 Document Provided Additional Comments After The Final Report Had

  11. Update: Transitional Bilingual Instruction Program (TBIP), 2012-2013

    ERIC Educational Resources Information Center

    Malagon, Helen; McCold, Paul; Nelson, Joan Johnston

    2013-01-01

    This report provides an update on the Transitional Bilingual Instruction Program (TBIP). In 2012-13, 104,025 English language learners (ELLs) received state services through the TBIP. This was an increase of just over 9% from the previous year. Most students live in urban areas along Interstate 5 corridor and in rural areas like the Yakima Valley.…

  12. 78 FR 47336 - Privacy Act of 1974; Computer Matching Program Between the Department of Housing and Urban...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-05

    ... provides an updated cost/benefit analysis providing an assessment of the benefits attained by HUD through... the scope of the existing computer matching program to now include the updated cost/ benefit analysis... change, and find a continued favorable examination of benefit/cost results; and (2) All parties certify...

  13. 76 FR 53137 - Board of Scientific Counselors, National Center for Health Statistics, (BSC, NCHS)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-25

    ... Regulation, Subpart 101-20.301, all persons entering in or on Federal controlled property and their packages... Discussed: The agenda will include welcome remarks by the Director, NCHS; update on the Health Indicators Warehouse; update on program reviews; discussion of the NHANES program, plans for the NHIS for 2012 and...

  14. The Recreational Fee Demonstration Program on the national forests: and updated analysis of public attitudes and beliefs, 1996-2001.

    Treesearch

    David N. Bengston; David P. Fan

    2002-01-01

    Analyzes trends in favorable and unfavorable attitudes toward the Recreational Fee Demonstration Program (RFDP) in the national forests, updating an earlier study using computer content analysis of the public debate. About 65 percent of the attitudes toward the RFDP were favorable, comparable to the findings of survey research.

  15. United States Department of Education Update

    ERIC Educational Resources Information Center

    Linton, John

    2008-01-01

    In this update, the author notes the passage of the "Second Chance Act" by Congress--signed into law by the President on April 9, 2008. Programs created in law may or may not be immediately funded and implemented. The criminal justice community will be watching the appropriation process with interest to learn what Second Chance programs will be…

  16. Complex Burn Region Module (CBRM) update

    NASA Technical Reports Server (NTRS)

    Adams, Carl L.; Jenkins, Billy

    1991-01-01

    Presented here is a Complex Burn Region Module (CBRM) update for the Solid Rocket Internal Ballistics Module (SRIBM) Program for the Advanced Solid Rocket Motor (ASRM) design/performance assessments. The goal was to develop an improved version of the solid rocket internal ballistics module program that contains a diversified complex region model for motor grain design, performance prediction, and evaluation.

  17. Medicare Program; FY 2017 Hospice Wage Index and Payment Rate Update and Hospice Quality Reporting Requirements. Final rule.

    PubMed

    2016-08-05

    This final rule will update the hospice wage index, payment rates, and cap amount for fiscal year (FY) 2017. In addition, this rule changes the hospice quality reporting program, including adopting new quality measures. Finally, this final rule includes information regarding the Medicare Care Choices Model (MCCM).

  18. MANTECH project book

    NASA Astrophysics Data System (ADS)

    The effective integration of processes, systems, and procedures used in the production of aerospace systems using computer technology is managed by the Integration Technology Division (MTI). Under its auspices are the Information Management Branch, which is actively involved with information management, information sciences and integration, and the Implementation Branch, whose technology areas include computer integrated manufacturing, engineering design, operations research, and material handling and assembly. The Integration Technology Division combines design, manufacturing, and supportability functions within the same organization. The Processing and Fabrication Division manages programs to improve structural and nonstructural materials processing and fabrication. Within this division, the Metals Branch directs the manufacturing methods program for metals and metal matrix composites processing and fabrication. The Nonmetals Branch directs the manufacturing methods programs, which include all manufacturing processes for producing and utilizing propellants, plastics, resins, fibers, composites, fluid elastomers, ceramics, glasses, and coatings. The objective of the Industrial Base Analysis Division is to act as focal point for the USAF industrial base program for productivity, responsiveness, and preparedness planning.

  19. MSFC crack growth analysis computer program, version 2 (users manual)

    NASA Technical Reports Server (NTRS)

    Creager, M.

    1976-01-01

    An updated version of the George C. Marshall Space Flight Center Crack Growth Analysis Program is described. The updated computer program has significantly expanded capabilities over the original one. This increased capability includes an extensive expansion of the library of stress intensity factors, plotting capability, increased design iteration capability, and the capability of performing proof test logic analysis. The technical approaches used within the computer program are presented, and the input and output formats and options are described. Details of the stress intensity equations, example data, and example problems are presented.

  20. Additional development of the XTRAN3S computer program

    NASA Technical Reports Server (NTRS)

    Borland, C. J.

    1989-01-01

    Additional developments and enhancements to the XTRAN3S computer program, a code for calculation of steady and unsteady aerodynamics, and associated aeroelastic solutions, for 3-D wings in the transonic flow regime are described. Algorithm improvements for the XTRAN3S program were provided including an implicit finite difference scheme to enhance the allowable time step and vectorization for improved computational efficiency. The code was modified to treat configurations with a fuselage, multiple stores/nacelles/pylons, and winglets. Computer program changes (updates) for error corrections and updates for version control are provided.

  1. GHGRP Electronics Manufacturing Sector Industrial Profile

    EPA Pesticide Factsheets

    EPA's Greenhouse Gas Reporting Program periodically produces detailed profiles of the various industries that report under the program. The profiles available for download below contain detailed analyses for the Electronics Manufacturing industry.

  2. Manufacturing Methods and Technology Program Plan, CY 1984.

    DTIC Science & Technology

    1984-09-01

    77nD-Al48 828 MANUFACTURING METHODS AIND TECHNOLOGY PROGRAM PLAN CY 1/3 1984(U) ARMY INDUSTRIAL BASE ENGINEERING ACTIVITY ROCK ISLAND IL G FISCHER...1984 MANUFACTURING TECHNOLOGY DIVISION U S ARMY INDUSTRIAL BASE ENGINEERING ACTIVITY ROCK ISLAND, ILLINOIS 61299-7260 8 4 30 033 .. . . . . ...4i.l...NUMBE2N. GOVT ACCESSION NO. 3. RECIPIENT’S CATALOG NUMBER i2- ffl7’ NONE 14TTITLE (Mid Skdde) S. TYPE OF REPORT & PERIOD COVERED MANUFACTURING METHODS

  3. UPEML Version 2. 0: A machine-portable CDC Update emulator

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mehlhorn, T.A.; Young, M.F.

    1987-05-01

    UPEML is a machine-portable CDC Update emulation program. UPEML is written in ANSI standard Fortran-77 and is relatively simple and compact. It is capable of emulating a significant subset of the standard CDC Update functions, including program library creation and subsequent modification. Machine-portability is an essential attribute of UPEML. UPEML was written primarily to facilitate the use of CDC-based scientific packages on alternate computer systems such as the VAX 11/780 and the IBM 3081. UPEML has also been successfully used on the multiprocessor ELXSI, on CRAYs under both COS and CTSS operating systems, on APOLLO workstations, and on the HP-9000.more » Version 2.0 includes enhanced error checking, full ASCI character support, a program library audit capability, and a partial update option in which only selected or modified decks are written to the compile file. Further enhancements include checks for overlapping corrections, processing of nested calls to common decks, and reads and addfiles from alternate input files.« less

  4. The American Society for Radiation Oncology's 2010 Core Physics Curriculum for Radiation Oncology Residents

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Xiao Ying, E-mail: ying.xiao@jefferson.edu; De Amorim Bernstein, Karen; Chetty, Indrin J.

    Purpose: In 2004, the American Society for Radiation Oncology (ASTRO) published its first physics education curriculum for residents, which was updated in 2007. A committee composed of physicists and physicians from various residency program teaching institutions was reconvened again to update the curriculum in 2009. Methods and Materials: Members of this committee have associations with ASTRO, the American Association of Physicists in Medicine, the Association of Residents in Radiation Oncology, the American Board of Radiology (ABR), and the American College of Radiology. Members reviewed and updated assigned subjects from the last curriculum. The updated curriculum was carefully reviewed by amore » representative from the ABR and other physics and clinical experts. Results: The new curriculum resulted in a recommended 56-h course, excluding initial orientation. Learning objectives are provided for each subject area, and a detailed outline of material to be covered is given for each lecture hour. Some recent changes in the curriculum include the addition of Radiation Incidents and Bioterrorism Response Training as a subject and updates that reflect new treatment techniques and modalities in a number of core subjects. The new curriculum was approved by the ASTRO board in April 2010. We anticipate that physicists will use this curriculum for structuring their teaching programs, and subsequently the ABR will adopt this educational program for its written examination. Currently, the American College of Radiology uses the ASTRO curriculum for their training examination topics. In addition to the curriculum, the committee updated suggested references and the glossary. Conclusions: The ASTRO physics education curriculum for radiation oncology residents has been updated. To ensure continued commitment to a current and relevant curriculum, the subject matter will be updated again in 2 years.« less

  5. The American Society for Radiation Oncology's 2010 core physics curriculum for radiation oncology residents.

    PubMed

    Xiao, Ying; Bernstein, Karen De Amorim; Chetty, Indrin J; Eifel, Patricia; Hughes, Lesley; Klein, Eric E; McDermott, Patrick; Prisciandaro, Joann; Paliwal, Bhudatt; Price, Robert A; Werner-Wasik, Maria; Palta, Jatinder R

    2011-11-15

    In 2004, the American Society for Radiation Oncology (ASTRO) published its first physics education curriculum for residents, which was updated in 2007. A committee composed of physicists and physicians from various residency program teaching institutions was reconvened again to update the curriculum in 2009. Members of this committee have associations with ASTRO, the American Association of Physicists in Medicine, the Association of Residents in Radiation Oncology, the American Board of Radiology (ABR), and the American College of Radiology. Members reviewed and updated assigned subjects from the last curriculum. The updated curriculum was carefully reviewed by a representative from the ABR and other physics and clinical experts. The new curriculum resulted in a recommended 56-h course, excluding initial orientation. Learning objectives are provided for each subject area, and a detailed outline of material to be covered is given for each lecture hour. Some recent changes in the curriculum include the addition of Radiation Incidents and Bioterrorism Response Training as a subject and updates that reflect new treatment techniques and modalities in a number of core subjects. The new curriculum was approved by the ASTRO board in April 2010. We anticipate that physicists will use this curriculum for structuring their teaching programs, and subsequently the ABR will adopt this educational program for its written examination. Currently, the American College of Radiology uses the ASTRO curriculum for their training examination topics. In addition to the curriculum, the committee updated suggested references and the glossary. The ASTRO physics education curriculum for radiation oncology residents has been updated. To ensure continued commitment to a current and relevant curriculum, the subject matter will be updated again in 2 years. Copyright © 2011 Elsevier Inc. All rights reserved.

  6. The Barriers to Acceptance of Plug-in Electric Vehicles: 2017 Update

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Singer, Mark R.

    Vehicle manufacturers, government agencies, universities, private researchers, and organizations worldwide are pursuing advanced vehicle technologies that aim to reduce the consumption of petroleum in the forms of gasoline and diesel. Plug-in electric vehicles (PEVs) are one such technology. This report, an update to the previous version published in December 2016, details findings from a study in February 2017 of broad American public sentiments toward issues that surround PEVs. This report is supported by the U.S. Department of Energy's Vehicle Technologies Office in alignment with its mission to develop and deploy these technologies to improve energy security, enhance mobility flexibility, reducemore » transportation costs, and increase environmental sustainability.« less

  7. Selection of 3013 Containers for Field Surveillance. Fiscal Year 2016 Update

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kelly, Elizabeth J.; Berg, John M.; Cheadle, Jesse

    2016-04-19

    This update is the eighth in a series of reports that document the binning and sample selection of 3013 containers for the Field Surveillance program as part of the Integrated Surveillance Program. This report documents changes made to both the container binning assignments and the sample selection approach. Binning changes documented in this update are a result of changes to the prompt gamma calibration curves and the reassignment of a small number of Hanford items from the Pressure bin to the Pressure and Corrosion (P&C) bin. Field Surveillance sample selection changes are primarily a result of focusing future destructive examinationsmore » (DEs) on the potential for stress corrosion cracking in higher moisture containers in the P&C bin. The decision to focus the Field Surveillance program on higher moisture items is based on findings from both the Shelf-life testing program and DEs.« less

  8. Federal Geothermal Research Program Update Fiscal Year 1999

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    2004-02-01

    The Department of Energy (DOE) and its predecessors have conducted research and development (R&D) in geothermal energy since 1971. To develop the technology needed to harness the Nation's vast geothermal resources, DOE's Office of Geothermal and Wind Technologies oversees a network of national laboratories, industrial contractors, universities, and their subcontractors. The following mission and goal statements guide the overall activities of the Office of Geothermal and Wind Technologies. This Federal Geothermal Program Research Update reviews the specific objectives, status, and accomplishments of DOE's Geothermal Program for Federal Fiscal Year (FY) 1999. The information contained in this Research Update illustrates howmore » the mission and goals of the Office of Geothermal and Wind Technologies are reflected in each R&D activity. The Geothermal Program, from its guiding principles to the most detailed research activities, is focused on expanding the use of geothermal energy.« less

  9. Medicare program; inpatient psychiatric facilities prospective payment system--update for fiscal year beginning October 1, 2014 (FY 2015). Final rule.

    PubMed

    2014-08-06

    This final rule will update the prospective payment rates for Medicare inpatient hospital services provided by inpatient psychiatric facilities (IPFs). These changes will be applicable to IPF discharges occurring during the fiscal year (FY) beginning October 1, 2014 through September 30, 2015. This final rule will also address implementation of ICD-10-CM and ICD-10-PCS codes; finalize a new methodology for updating the cost of living adjustment (COLA), and finalize new quality measures and reporting requirements under the IPF quality reporting program.

  10. 24 CFR 3286.102 - Information provided by manufacturer.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... HOUSING AND URBAN DEVELOPMENT MANUFACTURED HOME INSTALLATION PROGRAM Certification of Installation in HUD-Administered States § 3286.102 Information provided by manufacturer. (a) Shipment of home to retailer or distributor. At the time the manufactured home is shipped to a retailer or distributor, the manufacturer must...

  11. National Survey of Computer Aided Manufacturing in Industrial Technology Programs.

    ERIC Educational Resources Information Center

    Heidari, Farzin

    The current status of computer-aided manufacturing in the 4-year industrial technology programs in the United States was studied. All industrial technology department chairs were mailed a questionnaire divided into program information, equipment information, and general comments sections. The questionnaire was designed to determine the subjects…

  12. Manufacturing Innovation and Technological Superiority

    DTIC Science & Technology

    2016-09-01

    Defense AT&L: September-October 2016 2 From the Under Secretary of Defense for Acquisit ion, Technology, and Logist ics Manufacturing Innovation ...program to establish Manufacturing Innovation Institutes (MIIs) that would create incubators for advanced manufacturing technology in key

  13. Forests of Louisiana, 2014

    Treesearch

    S.N. Oswalt

    2017-01-01

    This resource update provides an overview of forest resources in Louisiana based on an inventory conducted by the U.S. Forest Service, Forest Inventory and Analysis (FIA) program at the Southern Research Station. Estimates are based on field data collected using the FIA annualized sample design and are updated yearly. The estimates presented in this update are for the...

  14. Forests of Kentucky, 2014

    Treesearch

    Thomas Brandeis; Andy Hartsell; KaDonna Randolph; Sonja Oswalt; Consuelo Brandeis

    2016-01-01

    This resource update provides an overview of forest resources in Kentucky based on an inventory conducted by the U.S. Forest Service, Forest Inventory and Analysis (FIA) program at the Southern Research Station. Estimates are based on field data collected using the FIA annualized sample design and are updated yearly. The estimates presented in this update are...

  15. Part C Updates: 9th Edition

    ERIC Educational Resources Information Center

    Danaher, Joan; Goode, Sue; Lazara, Alex

    2007-01-01

    "Part C Updates" is a compilation of information on various aspects of the Early Intervention Program for Infants and Toddlers with Disabilities (Part C) of the Individuals with Disabilities Education Act (IDEA). This is the ninth volume in a series of compilations, which included two editions of Part H Updates, the former name of the…

  16. 76 FR 45786 - Advanced Scientific Computing Advisory Committee; Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-01

    ... updates. EU Data Initiative. HPC & EERE Wind Program. Early Career Research on Energy Efficient Interconnect for Exascale Computing. Separating Algorithm and Implentation. Update on ASCR exascale planning...

  17. The Fiscal Impact of the Milwaukee Parental Choice Program: 2009 Update. SCDP Milwaukee Evaluation Report #7

    ERIC Educational Resources Information Center

    Costrell, Robert M.

    2009-01-01

    In February 2008, the School Choice Demonstration Project (SCDP) issued its first report on the fiscal impact of the Milwaukee Parental Choice Program (MPCP) on taxpayers in Milwaukee and the state of Wisconsin. There are two reasons to update the 2008 report. First, the figures will naturally change with the continuing growth of the voucher…

  18. Reassessing the Skills Required of Graduates of an Information Systems Program: An Updated Analysis

    ERIC Educational Resources Information Center

    Legier, John; Woodward, Belle; Martin, Nancy

    2013-01-01

    The study involves an updated analysis of the job characteristics of information systems graduates based on the status of the job market as well as the perceptions of 72 graduates from an information systems program of a Midwestern university. Approximately one-third of the graduates were working in positions related to technical support.…

  19. U.S. Foundation Funding for Change in South Africa: An Update. South African Information Exchange Working Paper Number 10.

    ERIC Educational Resources Information Center

    Micou, Ann M.

    The South African Information Exchange (SAIE) has published an update of 35 existing organizations who are engaged in funding initiatives for specific areas of South African and United States educational exchange programs. One list is alphabetical by such program categories as: academic exchange, academic support, adult education, advocacy,…

  20. Update on 2005-06 State Financial Aid Program Activity and 2006-07 Estimates

    ERIC Educational Resources Information Center

    Washington Higher Education Coordinating Board, 2006

    2006-01-01

    The state of Washington is committed to higher education opportunity for all students, regardless of income, through its state financial aid programs. The purpose of this report is to provide the members of the Higher Education Coordinating Board (HECB) with an overview of state and federal financial aid in Washington, an update on state financial…

  1. Kennedy Space Center Director Update

    NASA Image and Video Library

    2014-03-06

    CAPE CANAVERAL, Fla. - Community leaders, business executives, educators, and state and local government leaders were updated on NASA Kennedy Space Center programs and accomplishments during Center Director Bob Cabana’s Center Director Update at the Debus Center at the Kennedy Space Center Visitor Complex in Florida. An attendee talks with engineers Jason Hopkins and Lisa Lutz, at the Ground Systems Development and Operations display. Attendees talked with Cabana and other senior Kennedy managers and visited displays featuring updates on Kennedy programs and projects, including International Space Station, Commercial Crew, Ground System Development and Operations, Launch Services, Center Planning and Development, Technology, KSC Swamp Works and NASA Education. The morning concluded with a tour of the new Space Shuttle Atlantis exhibit at the visitor complex. For more information, visit http://www.nasa.gov/kennedy. Photo credit: NASA/Daniel Casper

  2. Kennedy Space Center Director Update

    NASA Image and Video Library

    2014-03-06

    CAPE CANAVERAL, Fla. - Community leaders, business executives, educators, and state and local government leaders were updated on NASA Kennedy Space Center programs and accomplishments during Center Director Bob Cabana’s Center Director Update at the Debus Center at the Kennedy Space Center Visitor Complex in Florida. Rob Mueller, senior technologist, talks with attendees at the Swamp Works display. Attendees talked with Cabana and other senior Kennedy managers and visited displays featuring updates on Kennedy programs and projects, including International Space Station, Commercial Crew, Ground System Development and Operations, Launch Services, Center Planning and Development, Technology, KSC Swamp Works and NASA Education. The morning concluded with a tour of the new Space Shuttle Atlantis exhibit at the visitor complex. For more information, visit http://www.nasa.gov/kennedy. Photo credit: NASA/Daniel Casper

  3. Kennedy Space Center Director Update

    NASA Image and Video Library

    2014-03-06

    CAPE CANAVERAL, Fla. - Community leaders, business executives, educators, and state and local government leaders were updated on NASA Kennedy Space Center programs and accomplishments during Center Director Bob Cabana’s Center Director Update at the Debus Center at the Kennedy Space Center Visitor Complex in Florida. Rob Mueller, a senior technologist, talks to an attendee about Kennedy’s Swamp Works Laboratory. Attendees talked with Cabana and other senior Kennedy managers and visited displays featuring updates on Kennedy programs and projects, including International Space Station, Commercial Crew, Ground System Development and Operations, Launch Services, Center Planning and Development, Technology, KSC Swamp Works and NASA Education. The morning concluded with a tour of the new Space Shuttle Atlantis exhibit at the visitor complex. For more information, visit http://www.nasa.gov/kennedy. Photo credit: NASA/Daniel Casper

  4. Design of affordable and ruggedized biomedical devices using virtual instrumentation.

    PubMed

    Mathern, Ryan Michael; Schopman, Sarah; Kalchthaler, Kyle; Mehta, Khanjan; Butler, Peter

    2013-05-01

    Abstract This paper presents the designs of four low-cost and ruggedized biomedical devices, including a blood pressure monitor, thermometer, weighing scale and spirometer, designed for the East African context. The design constraints included a mass-production price point of $10, accuracy and precision comparable to commercial devices and ruggedness to function effectively in the harsh environment of East Africa. The blood pressure device, thermometer and weighing scale were field-tested in Kenya and each recorded data within 6% error of the measurements from commercial devices and withstood the adverse climate and rough handling. The spirometer functioned according to specifications, but a re-design is needed to improve operability and usability by patients. This article demonstrates the feasibility of designing and commercializing virtual instrumentation-based biomedical devices in resource-constrained environments through context-driven design. The next steps for the devices include designing them such that they can be more easily manufactured, use standardized materials, are easily calibrated in the field and have more user-friendly software programs that can be updated remotely.

  5. Report on all ARRA Funded Technical Work

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None, None

    2013-10-05

    The main focus of this American Recovery and Reinvestment Act of 2009 (ARRA) funded project was to design an energy efficient carbon capture and storage (CCS) process using the Recipients membrane system for H{sub 2} separation and CO{sub 2} capture. In the ARRA-funded project, the Recipient accelerated development and scale-up of ongoing hydrogen membrane technology research and development (R&D). Specifically, this project focused on accelerating the current R&D work scope of the base program-funded project, involving lab scale tests, detail design of a 250 lb/day H{sub 2} process development unit (PDU), and scale-up of membrane tube and coating manufacturing. Thismore » project scope included the site selection and a Front End Engineering Design (FEED) study of a nominally 4 to 10 ton-per-day (TPD) Pre-Commercial Module (PCM) hydrogen separation membrane system. Process models and techno-economic analysis were updated to include studies on integration of this technology into an Integrated Gasification Combined Cycle (IGCC) power generation system with CCS.« less

  6. Phosphoric and electric utility fuel cell technology development

    NASA Astrophysics Data System (ADS)

    Breault, R. D.; Briggs, T. A.; Congdon, J. V.; Demarche, T. E.; Gelting, R. L.; Goller, G. J.; Luoma, W. I.; McCloskey, M. W.; Mientek, A. P.; Obrien, J. J.

    1984-01-01

    The advancement of electric utility cell stack technology and reduction of cell stack cost was initiated. The cell stack has a nominal 10 ft (2) active area and operates at 120 psia/405(0)F. The program comprises six parallel phases, which culminate in a full height, 10-ft(2) stack verification test: (1) provides the information and services needed to manage the effort, including definition of the prototype commercial power plant; (2) develops the technical base for long term improvements to the cell stack; (3) develops materials and processing techniques for cell stack components incorporating the best available technology; (4) provides the design of hardware and conceptual processing layouts, and updates the power plant definition of Phase 1 to reflect the results of Phases 2 and 3; Phase 5 manufactures the hardware to verify the achievements of Phases 2 and 3, and analyzes the cost of this hardware; and Phase 6 tests the cell stacks assembled from the hardware of Phase 5 to assess the state of development.

  7. NASA-STD-6001B Test 7: Impact of Test Methodology and Detection Advancements on the Obsolescence of Historical Offgas Data

    NASA Technical Reports Server (NTRS)

    Buchanan, Vanessa D.; Woods, Brenton; Harper, Susana A.; Beeson, Harold D.; Perez, Horacio; Ryder, Valerie; Tapia, Alma S.; Pedley, Michael D.

    2017-01-01

    NASA-STD-6001B states "all nonmetals tested in accordance with NASA-STD-6001 should be retested every 10 years or as required by the responsible program/project." The retesting of materials helps ensure the most accurate data are used in material selection. Manufacturer formulas and processes can change over time, sometimes without an update to product number and material information. Material performance in certain NASA-STD-6001 tests can be particularly vulnerable to these changes, such as material offgas (Test 7). In addition, Test 7 analysis techniques at NASA White Sands Test Facility were dramatically enhanced in the early 1990s, resulting in improved detection capabilities. Low level formaldehyde identification was improved again in 2004. Understanding the limitations in offgas analysis data prior to 1990 puts into question the validity and current applicability of that data. Case studies on Super Koropon (Registered trademark) and Aeroglaze (Registered trademark) topcoat highlight the importance of material retesting.

  8. Pocketing mechanics of SRM nozzle liner

    NASA Technical Reports Server (NTRS)

    Verderaime, V. S.

    1986-01-01

    A systems approach was adopted to study the pocketing phenomena on a solid rocket nozzle liner. The classical thermoelastic analysis was used to identify marginally strained regions on the composite liner erosion surface and at a depth coincident with the peak value of the across ply coefficient of thermal expansion. A failure criterion was introduced which included a thermal term and permitted failure assessment over the charred liner. The method was verified by satisfactory application to a reported related experiment. Liner pocketing mechanism was attributed to very localized material degradation caused during manufacturing process either by reduction of fiber strength and/or by concentration of resin volume fraction. Pocketing scenario over the degraged material was constructed with supporting formulation to predict size of fissures with respect to degraded material size and location in the liner and with burn time. Sensitivities of liner material parameters were determined to influence test programs designed to update mechanical data base of carbon cloth phenolic over the char temperature range.

  9. 40 CFR 1054.625 - What requirements apply under the Transition Program for Equipment Manufacturers?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... if you have primary responsibility for designing and manufacturing equipment and your manufacturing... specifically to companies that manufacture equipment outside the United States and to companies that import such equipment without manufacturing it. Engines and equipment you produce under this section are...

  10. Using FutureForce Nebraska to Shape Manufacturing Curriculum

    ERIC Educational Resources Information Center

    Glenn, Tony

    2007-01-01

    Nebraska, like most states in the U.S., is facing a critical shortage of skilled and employable workers. Business and industry want to grow in Nebraska and realize the road to ensuring success is a workforce possessing updated knowledge and skills that support the use of new technologies, as well as a necessary work ethic to be a dependable and…

  11. Estimating sawmill processing capacity for tongass timber: 2007 and 2008 update

    Treesearch

    Susan J. Alexander; Daniel J. Parrent

    2010-01-01

    In spring and summer of 2008 and 2009, sawmill production capacity and utilization information was collected from major wood manufacturers in southeast Alaska. The estimated mill capacity in southeast Alaska for calendar year 2007 was 292,350 thousand board feet (mbf) (log scale), and for calendar year 2008 was 282,350 mbf (log scale). Mill production in calendar year...

  12. Estimating sawmill processing capacity for Tongass timber: 2009 and 2010 Update

    Treesearch

    Susan J. Alexander; Daniel J. Parrent

    2012-01-01

    In spring and summer of 2010 and 2011, sawmill production capacity and wood utilization information was collected from major wood manufacturers in southeast Alaska. The estimated mill capacity in southeast Alaska for calendar year (CY) 2009 was 249,350 thousand board feet (mbf) (log scale), and for CY 2010 was 155,850 mbf (log scale), including idle sawmills. Mill...

  13. The National Shipbuilding Research Program, Proceedings of the REAPS Technical Symposium (2nd) held in Palm Beach Shores, Florida, on 24-25 Jun 1975: Full Proceedings

    DTIC Science & Technology

    1975-06-01

    AUTOKON-71 System. Her major tasks include processing Analysis Requests, releasing new system versions, and coordinating program modifications. Some past...for deformed meshes; improvement of crane boom analysis test data and a post-pro- cessing program. I. BACKGROUND 1. What is the AUTOKON System n? a...updates to either enhance or correct the capa- bilities has been generated. Two major sources contribute these updates: the REAPS Analysis Request (AR

  14. A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing

    PubMed Central

    Shirazi, Seyed Farid Seyed; Gharehkhani, Samira; Mehrali, Mehdi; Yarmand, Hooman; Metselaar, Hendrik Simon Cornelis; Adib Kadri, Nahrizul; Osman, Noor Azuan Abu

    2015-01-01

    Since most starting materials for tissue engineering are in powder form, using powder-based additive manufacturing methods is attractive and practical. The principal point of employing additive manufacturing (AM) systems is to fabricate parts with arbitrary geometrical complexity with relatively minimal tooling cost and time. Selective laser sintering (SLS) and inkjet 3D printing (3DP) are two powerful and versatile AM techniques which are applicable to powder-based material systems. Hence, the latest state of knowledge available on the use of AM powder-based techniques in tissue engineering and their effect on mechanical and biological properties of fabricated tissues and scaffolds must be updated. Determining the effective setup of parameters, developing improved biocompatible/bioactive materials, and improving the mechanical/biological properties of laser sintered and 3D printed tissues are the three main concerns which have been investigated in this article. PMID:27877783

  15. A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing.

    PubMed

    Shirazi, Seyed Farid Seyed; Gharehkhani, Samira; Mehrali, Mehdi; Yarmand, Hooman; Metselaar, Hendrik Simon Cornelis; Adib Kadri, Nahrizul; Osman, Noor Azuan Abu

    2015-06-01

    Since most starting materials for tissue engineering are in powder form, using powder-based additive manufacturing methods is attractive and practical. The principal point of employing additive manufacturing (AM) systems is to fabricate parts with arbitrary geometrical complexity with relatively minimal tooling cost and time. Selective laser sintering (SLS) and inkjet 3D printing (3DP) are two powerful and versatile AM techniques which are applicable to powder-based material systems. Hence, the latest state of knowledge available on the use of AM powder-based techniques in tissue engineering and their effect on mechanical and biological properties of fabricated tissues and scaffolds must be updated. Determining the effective setup of parameters, developing improved biocompatible/bioactive materials, and improving the mechanical/biological properties of laser sintered and 3D printed tissues are the three main concerns which have been investigated in this article.

  16. The use of Tecnomatix software to simulate the manufacturing flows in an industrial enterprise producing hydrostatic components

    NASA Astrophysics Data System (ADS)

    Petrila, S.; Brabie, G.; Chirita, B.

    2016-08-01

    The analysis performed on manufacturing flows within industrial enterprises producing hydrostatic components twos made on a number of factors that influence smooth running of production such: distance between pieces, waiting time from one surgery to another; time achievement of setups on CNC machines; tool changing in case of a large number of operators and manufacturing complexity of large files [2]. To optimize the manufacturing flow it was used the software Tecnomatix. This software represents a complete portfolio of manufacturing solutions digital manufactured by Siemens. It provides innovation by linking all production methods of a product from process design, process simulation, validation and ending the manufacturing process. Among its many capabilities to create a wide range of simulations, the program offers various demonstrations regarding the behavior manufacturing cycles. This program allows the simulation and optimization of production systems and processes in several areas such as: car suppliers, production of industrial equipment; electronics manufacturing, design and production of aerospace and defense parts.

  17. Northwest Energy Efficient Manufactured Housing Program Specification Development

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hewes, Tom; Peeks, Brady

    2013-02-01

    The DOE research team Building America Partnership for Improved Residential Construction (BA-PIRC), Bonneville Power Administration (BPA), and Northwest Energy Works (NEW), the current Northwest Energy Efficient Manufactured Home Program (NEEM) program administrator, collaborated to research a new specification that would reduce the energy requirements of a NEEM home.This research identified and developed combinations of cost-effective high performance building assemblies and mechanical systems that can readily can be deployed in the manufacturing setting that reduce energy used for space conditioning, water heating and lighting by 50% over the present NEEM specifications.

  18. Robotics in space-age manufacturing

    NASA Technical Reports Server (NTRS)

    Jones, Chip

    1991-01-01

    Robotics technologies are developed to improve manufacturing of space hardware. The following applications of robotics are covered: (1) welding for the space shuttle and space station Freedom programs; (2) manipulation of high-pressure water for shuttle solid rocket booster refurbishment; (3) automating the application of insulation materials; (4) precision application of sealants; and (5) automation of inspection procedures. Commercial robots are used for these development programs, but they are teamed with advanced sensors, process controls, and computer simulation to form highly productive manufacturing systems. Many of the technologies are also being actively pursued in private sector manufacturing operations.

  19. Assembly-line Simulation Program

    NASA Technical Reports Server (NTRS)

    Chamberlain, Robert G.; Zendejas, Silvino; Malhotra, Shan

    1987-01-01

    Costs and profits estimated for models based on user inputs. Standard Assembly-line Manufacturing Industry Simulation (SAMIS) program generalized so useful for production-line manufacturing companies. Provides accurate and reliable means of comparing alternative manufacturing processes. Used to assess impact of changes in financial parameters as cost of resources and services, inflation rates, interest rates, tax policies, and required rate of return of equity. Most important capability is ability to estimate prices manufacturer would have to receive for its products to recover all of costs of production and make specified profit. Written in TURBO PASCAL.

  20. Manufacturing engineering: Principles for optimization

    NASA Astrophysics Data System (ADS)

    Koenig, Daniel T.

    Various subjects in the area of manufacturing engineering are addressed. The topics considered include: manufacturing engineering organization concepts and management techniques, factory capacity and loading techniques, capital equipment programs, machine tool and equipment selection and implementation, producibility engineering, methods, planning and work management, and process control engineering in job shops. Also discussed are: maintenance engineering, numerical control of machine tools, fundamentals of computer-aided design/computer-aided manufacture, computer-aided process planning and data collection, group technology basis for plant layout, environmental control and safety, and the Integrated Productivity Improvement Program.

  1. 77 FR 4370 - NASA Advisory Council; Science Committee; Astrophysics Subcommittee; Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-27

    ... persons, scientific and technical information relevant to program planning. DATES: Thursday, February 23... topics: --Astrophysics Division Update --Update on Balloons Return to Flight Changes --James Webb Space...

  2. Method for distributed agent-based non-expert simulation of manufacturing process behavior

    DOEpatents

    Ivezic, Nenad; Potok, Thomas E.

    2004-11-30

    A method for distributed agent based non-expert simulation of manufacturing process behavior on a single-processor computer comprises the steps of: object modeling a manufacturing technique having a plurality of processes; associating a distributed agent with each the process; and, programming each the agent to respond to discrete events corresponding to the manufacturing technique, wherein each discrete event triggers a programmed response. The method can further comprise the step of transmitting the discrete events to each agent in a message loop. In addition, the programming step comprises the step of conditioning each agent to respond to a discrete event selected from the group consisting of a clock tick message, a resources received message, and a request for output production message.

  3. 24 CFR 200.936 - Supplementary specific procedural requirements under HUD building products certification program...

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... fireplace stoves certified under the HUD Building Products Certification Program shall be designed... and manufacturer series or model number; and (iv) The type of fuel to be used. (2) The certification... Accreditation Program. (2) The administrator shall visit the manufacturer's facility two times a year to assure...

  4. 24 CFR 200.936 - Supplementary specific procedural requirements under HUD building products certification program...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... fireplace stoves certified under the HUD Building Products Certification Program shall be designed... and manufacturer series or model number; and (iv) The type of fuel to be used. (2) The certification... Accreditation Program. (2) The administrator shall visit the manufacturer's facility two times a year to assure...

  5. 24 CFR 200.936 - Supplementary specific procedural requirements under HUD building products certification program...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... fireplace stoves certified under the HUD Building Products Certification Program shall be designed... and manufacturer series or model number; and (iv) The type of fuel to be used. (2) The certification... Accreditation Program. (2) The administrator shall visit the manufacturer's facility two times a year to assure...

  6. 24 CFR 200.936 - Supplementary specific procedural requirements under HUD building products certification program...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... fireplace stoves certified under the HUD Building Products Certification Program shall be designed... and manufacturer series or model number; and (iv) The type of fuel to be used. (2) The certification... Accreditation Program. (2) The administrator shall visit the manufacturer's facility two times a year to assure...

  7. The Boeing Company's Manufacturing Technology Student Internship. Final Evaluation Report for 1996.

    ERIC Educational Resources Information Center

    Owens, Tom

    A study evaluated The Boeing Company's Student Internship Program for students enrolled in a manufacturing technology program. The programs in the Seattle (Washington) and Portland (Oregon) areas provided students with three progressive internship levels offered in the summers of grades 11, 12, and 13 (the first year of community college). The…

  8. Program Evolves from Basic CAD to Total Manufacturing Experience

    ERIC Educational Resources Information Center

    Cassola, Joel

    2011-01-01

    Close to a decade ago, John Hersey High School (JHHS) in Arlington Heights, Illinois, made a transition from a traditional classroom-based pre-engineering program. The new program is geared towards helping students understand the entire manufacturing process. Previously, a JHHS student would design a project in computer-aided design (CAD) software…

  9. Southern Pennsylvania's Industrial Pipeline: "Pathways" Program Helps Local Manufacturers Find Quality Workers

    ERIC Educational Resources Information Center

    Dixon, John; Girifalco, Tony; Yakabosky, Walt

    2008-01-01

    This article describes the Applied Engineering Technology (AET) Career and Educational Pathways Program, which helps local manufacturers find quality workers. The program features 32 high schools, three community colleges, and 10 four-year institutions offering an integrated regional system of applied engineering education. The goal is to enroll…

  10. Development and Deployment of the Purdue TAP Green Enterprise Development Program

    ERIC Educational Resources Information Center

    Rogers, Ethan A.

    2013-01-01

    Purdue University--Mechanical, Engineering, and Technology (MET) faculty and Purdue Technical Assistance Program (TAP) staff partnered with the Society of Manufacturing Engineers (SME) to create a new workforce training program and certificate exam in the field of green manufacturing. This article describes how the body of knowledge for the…

  11. 24 CFR 3282.351 - General.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... program and can produce manufactured homes in conformance with its approved design, and (4) Performance of... MANUFACTURED HOME PROCEDURAL AND ENFORCEMENT REGULATIONS Primary Inspection Agencies § 3282.351 General. (a... are performed by primary inspection agencies: (1) Approval of the manufacturer's manufactured home...

  12. Alternative Fuels Data Center

    Science.gov Websites

    Advanced Technology Vehicle (ATV) and Alternative Fuel Infrastructure Manufacturing Incentives Through the Advanced Technology Vehicles Manufacturing Loan Program, manufacturers may be eligible for direct loans for up to 30% of the cost of re-equipping, expanding, or establishing manufacturing

  13. Marshall Space Flight Center Digital Manufacturing

    NASA Technical Reports Server (NTRS)

    Arays, Edward; Phillips, Steven

    2008-01-01

    This presentation highlights the history of DELMIA at MSFC; provides an overview of the Constellation Program; examines the manufacturing of Ares 1 Upper Stage; explains the digital manufacturing implementation for Ares 1 Upper Stage; and, discusses manufacturing and development problems and challenges.

  14. Status and plans of NASA's Materials Science and Manufacturing in Space (MS/MS) program

    NASA Technical Reports Server (NTRS)

    Armstrong, W. O.; Bredt, J. H.

    1972-01-01

    A description is given of a research and development program on the space shuttle mission designed to prepare the way for possible commercial manufacturing operations on permanently orbiting space stations.

  15. 15 CFR 291.1 - Program description.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION... amended, NIST will provide financial assistance to integrate environmentally-related services and resources into the national manufacturing extension system. This assistance will be provided by NIST often...

  16. 15 CFR 291.1 - Program description.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION... amended, NIST will provide financial assistance to integrate environmentally-related services and resources into the national manufacturing extension system. This assistance will be provided by NIST often...

  17. 15 CFR 291.1 - Program description.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION... amended, NIST will provide financial assistance to integrate environmentally-related services and resources into the national manufacturing extension system. This assistance will be provided by NIST often...

  18. 15 CFR 291.1 - Program description.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION... amended, NIST will provide financial assistance to integrate environmentally-related services and resources into the national manufacturing extension system. This assistance will be provided by NIST often...

  19. 15 CFR 291.1 - Program description.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION... amended, NIST will provide financial assistance to integrate environmentally-related services and resources into the national manufacturing extension system. This assistance will be provided by NIST often...

  20. 75 FR 80040 - Manufacturing Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-21

    ..., developing and marketing programs in support of manufacturing industries, job creation in the manufacturing... relevant contact information such as mailing address, fax, e-mail, fixed and mobile phone numbers and...

  1. Update on Risk Reduction Activities for a Liquid Advanced Booster for NASA's Space Launch System

    NASA Technical Reports Server (NTRS)

    Crocker, Andy; Graham, Bart

    2016-01-01

    Dynetics has designed innovative structure assemblies; manufactured them using Friction Stir Welding (FSW) to leverage NASA investments in tools, facilities, and processes; conducted proof and burst testing, demonstrating viability of design/build processes Dynetics/AR has applied state-of-the-art manufacturing and processing techniques to the heritage F-1, reducing risk for engine development Dynetics/AR has also made progress on technology demonstrations for ORSC cycle engine, which offers affordability and performance for both NASA and other launch vehicles Full-scale integrated oxidizer-rich test article. Testing will evaluate performance and combustion stability characteristics. Contributes to technology maturation for ox-rich staged combustion engines.

  2. Heuristic reusable dynamic programming: efficient updates of local sequence alignment.

    PubMed

    Hong, Changjin; Tewfik, Ahmed H

    2009-01-01

    Recomputation of the previously evaluated similarity results between biological sequences becomes inevitable when researchers realize errors in their sequenced data or when the researchers have to compare nearly similar sequences, e.g., in a family of proteins. We present an efficient scheme for updating local sequence alignments with an affine gap model. In principle, using the previous matching result between two amino acid sequences, we perform a forward-backward alignment to generate heuristic searching bands which are bounded by a set of suboptimal paths. Given a correctly updated sequence, we initially predict a new score of the alignment path for each contour to select the best candidates among them. Then, we run the Smith-Waterman algorithm in this confined space. Furthermore, our heuristic alignment for an updated sequence shows that it can be further accelerated by using reusable dynamic programming (rDP), our prior work. In this study, we successfully validate "relative node tolerance bound" (RNTB) in the pruned searching space. Furthermore, we improve the computational performance by quantifying the successful RNTB tolerance probability and switch to rDP on perturbation-resilient columns only. In our searching space derived by a threshold value of 90 percent of the optimal alignment score, we find that 98.3 percent of contours contain correctly updated paths. We also find that our method consumes only 25.36 percent of the runtime cost of sparse dynamic programming (sDP) method, and to only 2.55 percent of that of a normal dynamic programming with the Smith-Waterman algorithm.

  3. Q2/Q3 2016 Solar Industry Update

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Feldman, David; Boff, Daniel; Margolis, Robert

    This technical presentation provides an update on the major trends that occurred in the solar industry in the Q2 and Q3 of 2016. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

  4. Q3/Q4 2016 Solar Industry Update

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Feldman, David; Boff, Daniel; Margolis, Robert

    This technical presentation provides an update on the major trends that occurred in the solar industry in the Q3 and Q4 of 2016. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

  5. Q2/Q3 2017 Solar Industry Update

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Feldman, David J.; Hoskins, Jack; Margolis, Robert M.

    This technical presentation provides an update on the major trends that occurred in the solar industry in Q2 and Q3 of 2017. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

  6. Q4 2017/Q1 2018 Solar Industry Update

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Feldman, David J; Margolis, Robert M; Hoskins, Jack

    This technical presentation provides an update on the major trends that occurred in the solar industry in Q4 2017 and Q1 2018. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

  7. Q3/Q4 2017 Solar Industry Update

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Feldman, David J.; Hoskins, Jack; Margolis, Robert M.

    This technical presentation provides an update on the major trends that occurred in the solar industry in the Q3 and Q4 of 2017. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

  8. 75 FR 43235 - Medicare Program; Home Health Prospective Payment System Rate Update for Calendar Year 2011...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-23

    ... comment period. 3. By express or overnight mail. You may send written comments to the following address... approximately 3 weeks after publication of a document, at the headquarters of the Centers for Medicare... 2. Regulatory Update 3. Statutory Update 4. Outlier Cap 5. Loss Sharing Ratio and Fixed Dollar Ratio...

  9. 77 FR 71179 - TRICARE, Formerly Known as the Civilian Health and Medical Program of the Uniformed Services...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-29

    ... notice provides the updated regional per-diem rates for low-volume mental health providers; the update... beneficiary per-diem cost-share amount for low-volume providers; and, the updated per-diem rates for both full... with high TRICARE volume) and regional-specific rates for psychiatric hospitals and units with low...

  10. News and Updates from Proctor Creek

    EPA Pesticide Factsheets

    This page contains news and updates from the Proctor Creek Urban Waters Partnership location. They span ongoing projects, programs, and initiatives that this Atlanta-based partnership is taking on in its work plan.

  11. Development of Integrated Programs for Aerospace-vehicle Design (IPAD): Product manufacture interactions with the design process

    NASA Technical Reports Server (NTRS)

    Crowell, H. A.

    1979-01-01

    The product manufacturing interactions with the design process and the IPAD requirements to support the interactions are described. The data requirements supplied to manufacturing by design are identified and quantified. Trends in computer-aided manufacturing are discussed and the manufacturing process of the 1980's is anticipated.

  12. Accounting utility for determining individual usage of production level software systems

    NASA Technical Reports Server (NTRS)

    Garber, S. C.

    1984-01-01

    An accounting package was developed which determines the computer resources utilized by a user during the execution of a particular program and updates a file containing accumulated resource totals. The accounting package is divided into two separate programs. The first program determines the total amount of computer resources utilized by a user during the execution of a particular program. The second program uses these totals to update a file containing accumulated totals of computer resources utilized by a user for a particular program. This package is useful to those persons who have several other users continually accessing and running programs from their accounts. The package provides the ability to determine which users are accessing and running specified programs along with their total level of usage.

  13. Updating Human Factors Engineering Guidelines for Conducting Safety Reviews of Nuclear Power Plants

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    O, J.M.; Higgins, J.; Stephen Fleger - NRC

    The U.S. Nuclear Regulatory Commission (NRC) reviews the human factors engineering (HFE) programs of applicants for nuclear power plant construction permits, operating licenses, standard design certifications, and combined operating licenses. The purpose of these safety reviews is to help ensure that personnel performance and reliability are appropriately supported. Detailed design review procedures and guidance for the evaluations is provided in three key documents: the Standard Review Plan (NUREG-0800), the HFE Program Review Model (NUREG-0711), and the Human-System Interface Design Review Guidelines (NUREG-0700). These documents were last revised in 2007, 2004 and 2002, respectively. The NRC is committed to the periodicmore » update and improvement of the guidance to ensure that it remains a state-of-the-art design evaluation tool. To this end, the NRC is updating its guidance to stay current with recent research on human performance, advances in HFE methods and tools, and new technology being employed in plant and control room design. This paper describes the role of HFE guidelines in the safety review process and the content of the key HFE guidelines used. Then we will present the methodology used to develop HFE guidance and update these documents, and describe the current status of the update program.« less

  14. 40 CFR 79.20 - Application for registration by additive manufacturer.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... additive manufacturer. 79.20 Section 79.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.20 Application for registration by additive manufacturer. Any manufacturer of a designated...

  15. 40 CFR 79.20 - Application for registration by additive manufacturer.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... additive manufacturer. 79.20 Section 79.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.20 Application for registration by additive manufacturer. Any manufacturer of a designated...

  16. 40 CFR 79.20 - Application for registration by additive manufacturer.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... additive manufacturer. 79.20 Section 79.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.20 Application for registration by additive manufacturer. Any manufacturer of a designated...

  17. 40 CFR 79.20 - Application for registration by additive manufacturer.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... additive manufacturer. 79.20 Section 79.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.20 Application for registration by additive manufacturer. Any manufacturer of a designated...

  18. 40 CFR 79.20 - Application for registration by additive manufacturer.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... additive manufacturer. 79.20 Section 79.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGISTRATION OF FUELS AND FUEL ADDITIVES Additive Registration Procedures § 79.20 Application for registration by additive manufacturer. Any manufacturer of a designated...

  19. Computed Tomography Inspection and Analysis for Additive Manufacturing Components

    NASA Technical Reports Server (NTRS)

    Beshears, Ronald D.

    2017-01-01

    Computed tomography (CT) inspection was performed on test articles additively manufactured from metallic materials. Metallic AM and machined wrought alloy test articles with programmed flaws and geometric features were inspected using a 2-megavolt linear accelerator based CT system. Performance of CT inspection on identically configured wrought and AM components and programmed flaws was assessed to determine the impact of additive manufacturing on inspectability of objects with complex geometries.

  20. NASA Update

    NASA Image and Video Library

    2010-04-08

    "NASA Update" program with NASA Administrator Charles Bolden, NASA Deputy Administrator Lori Garver and NASA Acting Asistant Administrator for Public Affairs Bob Jacobs as moderator, NASA Headquarters, Thursday, April 8, 2010 in Washington. Photo Credit: (NASA/Bill Ingalls)

  1. Kennedy Space Center Director Update

    NASA Image and Video Library

    2014-03-06

    CAPE CANAVERAL, Fla. - Community leaders, business executives, educators, and state and local government leaders were updated on NASA Kennedy Space Center programs and accomplishments during Center Director Bob Cabana’s Center Director Update at the Debus Center at the Kennedy Space Center Visitor Complex in Florida. At left, Susan Fernandez from the Office of Senator Marco Rubio talks with another attendee near the Education display. Attendees talked with Cabana and other senior Kennedy managers and visited displays featuring updates on Kennedy programs and projects, including International Space Station, Commercial Crew, Ground System Development and Operations, Launch Services, Center Planning and Development, Technology, KSC Swamp Works and NASA Education. The morning concluded with a tour of the new Space Shuttle Atlantis exhibit at the visitor complex. For more information, visit http://www.nasa.gov/kennedy. Photo credit: NASA/Daniel Casper

  2. 78 FR 47859 - Medicare Program; Inpatient Rehabilitation Facility Prospective Payment System for Federal Fiscal...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-06

    ...This final rule updates the prospective payment rates for inpatient rehabilitation facilities (IRFs) for federal fiscal year (FY) 2014 (for discharges occurring on or after October 1, 2013 and on or before September 30, 2014) as required by the statute. This final rule also revised the list of diagnosis codes that may be counted toward an IRF's ``60 percent rule'' compliance calculation to determine ``presumptive compliance,'' update the IRF facility-level adjustment factors using an enhanced estimation methodology, revise sections of the Inpatient Rehabilitation Facility-Patient Assessment Instrument, revise requirements for acute care hospitals that have IRF units, clarify the IRF regulation text regarding limitation of review, update references to previously changed sections in the regulations text, and revise and update quality measures and reporting requirements under the IRF quality reporting program.

  3. Medicare program; inpatient rehabilitation facility prospective payment system for federal fiscal year 2014. Final rule.

    PubMed

    2013-08-06

    This final rule updates the prospective payment rates for inpatient rehabilitation facilities (IRFs) for federal fiscal year (FY) 2014 (for discharges occurring on or after October 1, 2013 and on or before September 30, 2014) as required by the statute. This final rule also revised the list of diagnosis codes that may be counted toward an IRF's "60 percent rule'' compliance calculation to determine "presumptive compliance,'' update the IRF facility-level adjustment factors using an enhanced estimation methodology, revise sections of the Inpatient Rehabilitation Facility-Patient Assessment Instrument, revise requirements for acute care hospitals that have IRF units, clarify the IRF regulation text regarding limitation of review, update references to previously changed sections in the regulations text, and revise and update quality measures and reporting requirements under the IRF quality reporting program.

  4. Field power measurements of imaging equipment

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McWhinney, Marla; Homan, Gregory; Brown, Richard

    2004-05-14

    According to the U.S. Department of Energy, electricity use by non-PC commercial office equipment is growing at an annual rate of nearly 5 percent (AEO 2003). To help address this growth in consumption, U.S. EPA periodically updates its ENERGY STAR specifications as products and markets change. This report presents background research conducted to help EPA update the ENERGY STAR specification for imaging equipment, which covers printers, fax machines, copiers, scanners, and multifunction devices (MFDs). We first estimated the market impact of the current ENERGY STAR imaging specification, finding over 90 percent of the current market complies with the specification. Wemore » then analyzed a sample of typical new imaging products, including 11 faxes, 57 printers and 19 copiers/MFD. For these devices we metered power levels in the most common modes: active/ready/sleep/off, and recorded features that would most likely affect energy consumption. Our metering indicates that for many products and speed bins, current models consume substantially less power than the current specification. We also found that for all product categories, power consumption varied most considerably across technology (i.e. inkjet vs. laser). Although inkjet printers consumed less energy than laser printers in active, ready and sleep-mode, they consumed more power on average while off, mostly due to the use of external power supplies. Based on these findings, we developed strategies for the ENERGY STAR program to achieve additional energy reductions. Finally, we present an assessment of manufacturer's ENERGY STAR labeling practices.« less

  5. Workplace Literacy: The Effects of an In-house Program on the Organization.

    ERIC Educational Resources Information Center

    Fretz, Barbara

    The effects of an in-house workplace literacy program on an organization are examined. A small Canadian manufacturing plant that began a workplace literacy program called Learning in the Workplace in 1990 was the site of this case study research. The plant was CCL Custom Manufacturing, which specialized in household powder-based products. Four…

  6. Toward a space materials systems program

    NASA Technical Reports Server (NTRS)

    Vontiesenhausen, G. F.

    1981-01-01

    A program implementation model is presented which covers the early stages of space material processing and manufacturing. The model includes descriptions of major program elements, development and experiment requirements in space materials processing and manufacturing, and an integration of the model into NASA's long range plans as well as its evolution from present Materials Processing in Space plans.

  7. Federal Employees Health Benefits Program and Federal Employees Dental and Vision Insurance Program: eligibility for Pathway Programs participants. Interim final rule with request for comments.

    PubMed

    2014-01-06

    The U.S. Office of Personnel Management (OPM) is issuing an interim final regulation to update the Federal Employees Health Benefits Program (FEHBP) and the Federal Employees Dental and Vision Insurance Program (FEDVIP) regulations to reflect updated election opportunities for participants in the Pathways Programs. The Pathways Programs were created by Executive Order (E.O.) 13562, signed by the President on December 27, 2010, and are designed to enable the Federal Government to compete effectively for students and recent graduates by improving its recruitment efforts through internships and similar programs with Federal agencies. This interim final rule furthers these recruitment and retention efforts by providing health insurance, as well as dental and vision benefits, to eligible program participants and their families.

  8. 32 CFR 507.6 - Authority to manufacture.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Authority to manufacture. 507.6 Section 507.6... PUBLIC RELATIONS MANUFACTURE AND SALE OF DECORATIONS, MEDALS, BADGES, INSIGNIA, COMMERCIAL USE OF HERALDIC DESIGNS AND HERALDIC QUALITY CONTROL PROGRAM Manufacture and Sale of Decorations, Medals, Badges...

  9. 78 FR 4157 - Manufactured Home Construction and Safety Standards Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-18

    ... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5683-N-06] Manufactured Home.... This Notice also lists the following information: Title of Proposal: Manufactured Home Construction and... Labels; Form HUD-302, HUD Manufactured Home Monthly Production Report; Form HUD-303, Refunds due...

  10. Commercial grade item (CGI) dedication of MDR relays for nuclear safety related applications

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Das, R.K.; Julka, A.; Modi, G.

    1994-08-01

    MDR relays manufactured by Potter and Brumfield (P and B) have been used in various safety related applications in commercial nuclear power plants. These include emergency safety features (ESF) actuation systems, emergency core cooling systems (ECCS) actuation, and reactor protection systems. The MDR relays manufactured prior to May 1990 showed signs of generic failure due to corrosion and outgassing of coil varnish. P and B has made design changes to correct these problems in relays manufactured after May 1990. However, P and B does not manufacture the relays under any 10CFR50 Appendix B quality assurance (QA) program. They manufacture themore » relays under their commercial QA program and supply these as commercial grade items. This necessitates CGI Dedication of these relays for use in nuclear-safety-related applications. This paper presents a CGI dedication program that has been used to dedicate the MDR relays manufactured after May 1990. The program is in compliance with current Nuclear Regulatory Commission (NRC) and Electric Power Research Institute (EPRI) guidelines and applicable industry standards; it specifies the critical characteristics of the relays, provides the tests and analysis required to verify the critical characteristics, the acceptance criteria for the test results, performs source verification to qualify P and B for its control of the critical characteristics, and provides documentation. The program provides reasonable assurance that the new MDR relays will perform their intended safety functions.« less

  11. Ares I Upper Stage Update

    NASA Technical Reports Server (NTRS)

    Davis, Daniel J.

    2010-01-01

    These presentation slides review the progress in the development of the Ares I upper stage. The development includes development of a manufacturing and processing assembly that will reduce the time required over 100 days, development of a weld tool that is a robotic tool that is the largest welder of its kind in the United States, development of avionics and software, and development of logisitics and operations systems.

  12. IRIS Toxicological Review of 1,4-Dioxane (with Inhalation ...

    EPA Pesticide Factsheets

    EPA is conducting a peer review and public comment of the scientific basis supporting the human health hazard and dose-response assessment of 1,4-Dioxane (with inhalation update) that when finalized will appear on the Integrated Risk Information System (IRIS) database. 1,4-Dioxane is commonly used as a solvent, cleaning agent, chemical stabilizer, surface coating, adhesive agent, and an ingredient in chemical manufacture.

  13. Medicare Program; End-Stage Renal Disease Prospective Payment System, Payment for Renal Dialysis Services Furnished to Individuals With Acute Kidney Injury, and End-Stage Renal Disease Quality Incentive Program. Final rule.

    PubMed

    2017-11-01

    This rule updates and makes revisions to the end-stage renal disease (ESRD) prospective payment system (PPS) for calendar year (CY) 2018. It also updates the payment rate for renal dialysis services furnished by an ESRD facility to individuals with acute kidney injury (AKI). This rule also sets forth requirements for the ESRD Quality Incentive Program (QIP), including for payment years (PYs) 2019 through 2021.

  14. Schools Going Solar: A Guide to Schools Enjoying the Power of Solar Energy. Volume 2.

    ERIC Educational Resources Information Center

    Hitchcock, Susan Tyler

    This companion document updates an April 1998 volume on designing schools to use solar energy as a power source. Volume 2 presents numerous case studies of solar installations in new and existing schools across the United States and Europe, updates and presents new examples of solar education programs, and offers an updated resource listing of…

  15. Q4 2016/Q1 2017 Solar Industry Update

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Margolis, Robert; Feldman, David; Boff, Daniel

    2017-05-17

    This technical presentation provides an update on the major trends that occurred in the solar industry in the fourth quarter of 2016 and the first quarter of 2017. Major topics of focus include global and U.S. supply and demand, module and system price, investment trends and business models, and updates on U.S. government programs supporting the solar industry.

  16. 76 FR 40987 - Medicare Program; Home Health Prospective Payment System Rate Update for Calendar Year 2012

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-12

    ... comments to be received before the close of the comment period. 3. By express or overnight mail. You may... they are received, generally beginning approximately 3 weeks after publication of a document, at the.... Background 2. Regulatory Update 3. Statutory Update 4. Loss-Sharing Ratio and Fixed Dollar Loss (FDL) Ratio 5...

  17. 76 FR 12074 - TRICARE, Formerly Known as the Civilian Health and Medical Program of the Uniformed Services...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-04

    ... notice provides the updated regional per-diem rates for low-volume mental health providers; the update... beneficiary per-diem cost-share amount for low-volume providers; and, the updated per-diem rates for both full... psychiatric hospitals and units with low TRICARE volume will have their TRICARE rates for Fiscal Year 2011...

  18. Federal Geothermal Research Program Update Fiscal Year 2002

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    2003-09-01

    The Department of Energy (DOE) and its predecessors have conducted research and development (R&D) in geothermal energy since 1971. To develop the technology needed to harness the Nation's vast geothermal resources, DOE's Office of Geothermal Technologies oversees a network of national laboratories, industrial contractors, universities, and their subcontractors. The goals are: (1) Double the number of States with geothermal electric power facilities to eight by 2006; (2) Reduce the levelized cost of generating geothermal power to 3-5 cents per kWh by 2007; and (3) Supply the electrical power or heat energy needs of 7 million homes and businesses in themore » United States by 2010. This Federal Geothermal Program Research Update reviews the specific objectives, status, and accomplishments of DOE's Geothermal Program for Federal Fiscal Year (FY) 2002. The information contained in this Research Update illustrates how the mission and goals of the Office of Geothermal Technologies are reflected in each R&D activity. The Geothermal Program, from its guiding principles to the most detailed research activities, is focused on expanding the use of geothermal energy. balanced strategy for the Geothermal Program.« less

  19. Effects of Title IV of the Clean Air Act Amendments of 1990 on Electric Utilities: An Update, The

    EIA Publications

    1997-01-01

    Describes the strategies used to comply with the Acid Rain Program in 1995, the effect of compliance on SO2 emissions levels, the cost of compliance, and the effects of the program on coal supply and demand. It updates and expands the EIA report, Electric Utility Phase I Acid Rain Compliance Strategies for the Clean Air Act Amendments of 1990.

  20. What's New in USDA's Food Distribution Program for Schools? School Programs USDA Foods Update. Volume 14, Issue 1

    ERIC Educational Resources Information Center

    US Department of Agriculture, 2009

    2009-01-01

    This paper provides an update on all the new products and projects that U.S. Department of Agriculture (USDA) Food and Nutrition Service (FNS) has been working on, in its effort to help schools meet the nutritional needs of the students and to help in the President's challenge to End Childhood Hunger by 2015. This issue includes: (1) Back to…

  1. Third COS FUV Lifetime Position: FUV Target Acquisition Parameter Update {LENA3}

    NASA Astrophysics Data System (ADS)

    Penton, Steven

    2013-10-01

    Verify the ability of the Cycle 22 COS FSW to place an isolated point source at the center of the PSA, using FUV dispersed light target acquisition (TA) from the object and all three FUV gratings at the Third Lifetime Position (LP3). This program is modeled from the activity summary of LENA3.This program should be executed after the LP3 HV, XD spectral positions, aperture mechanism position, and focus are determined and updated. In addition, initial estimates of the LIFETIME=ALTERNATE TA FSW parameters and subarrays should be updated prior to execution of this program. After Visit 01, the subarrays will be updated. After Visit 2, the FUV WCA-to-PSA offsets will be updateded. Prior to Visit 6, LV56 will be installed will include new values for the LP3 FUV plate scales. VISIT 6 exposures use the default lifetime position (LP3).NUV imaging TAs have previously been used to determine the correct locations for FUV spectra. We follow the same procedure here.Note that the ETC runs here were made using ETC22.2 and are therefore valid for Mach 2014. Some TDS drop will likely have occured before these visits execute, but we have plenty of count to go what we need to do in this program.

  2. Sources of information on postgraduate medical training programs and medical specialty career resources-2006 update.

    PubMed

    Brazin, Lillian R

    2006-01-01

    This is the final biennial update listing directories, journal articles, Web sites, and general books that aid the librarian, house officer, or medical student in finding information on medical residency and fellowship programs. The World Wide Web provides the most complete and up-to-date source of information about postgraduate training programs and specialties. This update continues to go beyond postgraduate training resources to include selected Web sites and books on curriculum vitae writing, practice management, personal finances, the "Match," certification and licensure examination preparation, lifestyle issues, job hunting, and the DEA license application process. Print resources are included if they provide information not on the Internet, have features that are particularly useful, or cover too many relevant topics in depth to be covered in a journal article or on a Web site. The Internet is a major marketing tool for hospitals seeking to recruit the best and brightest physicians for their training programs. Even the smallest community hospital has a Web site.

  3. Computed Tomography Inspection and Analysis for Additive Manufacturing Components

    NASA Technical Reports Server (NTRS)

    Beshears, Ronald D.

    2016-01-01

    Computed tomography (CT) inspection was performed on test articles additively manufactured from metallic materials. Metallic AM and machined wrought alloy test articles with programmed flaws were inspected using a 2MeV linear accelerator based CT system. Performance of CT inspection on identically configured wrought and AM components and programmed flaws was assessed using standard image analysis techniques to determine the impact of additive manufacturing on inspectability of objects with complex geometries.

  4. Manufacturing Curriculum Grant. Final Report.

    ERIC Educational Resources Information Center

    Scarborough, Jule Dee

    A manufacturing curriculum for secondary vocational programs was designed to bridge the gap between grades 9-10 level courses and the community college-level curriculum of the Illinois Plan for Industrial Education. During the project, a literature review of manufacturing curriculum materials was conducted, a manufacturing conceptual framework was…

  5. NASA's Space Launch System Program Update

    NASA Technical Reports Server (NTRS)

    May, Todd; Lyles, Garry

    2015-01-01

    Hardware and software for the world's most powerful launch vehicle for exploration is being welded, assembled, and tested today in high bays, clean rooms and test stands across the United States. NASA's Space Launch System (SLS) continued to make significant progress in 2014 with more planned for 2015, including firing tests of both main propulsion elements and the program Critical Design Review (CDR). Developed with the goals of safety, affordability, and sustainability, SLS will still deliver unmatched capability for human and robotic exploration. The initial Block 1 configuration will deliver more than 70 metric tons of payload to low Earth orbit (LEO). The evolved Block 2 design will deliver some 130 metric tons to LEO. Both designs offer enormous opportunity and flexibility for larger payloads, simplifying payload design as well as ground and on-orbit operations, shortening interplanetary transit times, and decreasing overall mission risk. Over the past year, every vehicle element has manufactured or tested hardware. An RS-25 liquid propellant engine was hotfire-tested at NASA's Stennis Space Center, Miss. for the first time since 2009 exercising and validating the new engine controller, the renovated A-1 test stand, and the test teams. Four RS-25s will power the SLS core stage. A qualification five-segment solid rocket motor incorporating several design, material, and process changes was scheduled to be test-fired in March at the prime contractor's facility in Utah. The booster also successfully completed its Critical Design Review (CDR) validating the planned design. All six major manufacturing tools for the core stage are in place at the Michoud Assembly Facility in Louisiana, and have been used to build numerous pieces of confidence, qualification, and even flight hardware, including barrel sections, domes and rings used to assemble the world's largest rocket stage. SLS Systems Engineering accomplished several key tasks including vehicle avionics software and hardware build and testing, scale model acoustic and base heating tests. Construction of the Interim Cryogenic Propulsion Stage (ICPS) began. Advanced development provided a look into the future of SLS. Shell buckling knockdown factor testing refined decades-old design margins that added thousands of pounds to rocket payloads. Adaptive manufacturing and structured light scanning development promised to cut the cost and time associated with manufacturing and testing. This paper will provide an overview of the progress made over the past year and provide a glimpse of 2015 milestones and beyond on the way to the first launch in 2018.

  6. An Introduction to Intelligent Processing Programs Developed by the Air Force Manufacturing Technology Directorate

    NASA Technical Reports Server (NTRS)

    Sampson, Paul G.; Sny, Linda C.

    1992-01-01

    The Air Force has numerous on-going manufacturing and integration development programs (machine tools, composites, metals, assembly, and electronics) which are instrumental in improving productivity in the aerospace industry, but more importantly, have identified strategies and technologies required for the integration of advanced processing equipment. An introduction to four current Air Force Manufacturing Technology Directorate (ManTech) manufacturing areas is provided. Research is being carried out in the following areas: (1) machining initiatives for aerospace subcontractors which provide for advanced technology and innovative manufacturing strategies to increase the capabilities of small shops; (2) innovative approaches to advance machine tool products and manufacturing processes; (3) innovative approaches to advance sensors for process control in machine tools; and (4) efforts currently underway to develop, with the support of industry, the Next Generation Workstation/Machine Controller (Low-End Controller Task).

  7. Small transport aircraft technology

    NASA Technical Reports Server (NTRS)

    Williams, L. J.

    1983-01-01

    Information on commuter airline trends and aircraft developments is provided to upgrade the preliminary findings of a NASA-formed small transport aircraft technology (STAT) team, established to determine whether the agency's research and development programs could help commuter aircraft manufacturers solve technical problems related to passenger acceptance and use of 19- to 50-passenger aircraft. The results and conclusions of the full set of completed STAT studies are presented. These studies were performed by five airplane manufacturers, five engine manufacturers, and two propeller manufacturers. Those portions of NASA's overall aeronautics research and development programs which are applicable to commuter aircraft design are summarized. Areas of technology that might beneficially be expanded or initiated to aid the US commuter aircraft manufacturers in the evolution of improved aircraft for the market are suggested.

  8. Update on Supersonic Jet Noise Research at NASA

    NASA Technical Reports Server (NTRS)

    Henderson, Brenda

    2010-01-01

    An update on jet noise research conducted in the Fundamental Aeronautics and Integrated Systems Research Programs was presented. Highlighted research projects included those focused on the development of prediction tools, diagnostic tools, and noise reduction concepts.

  9. Kennedy Space Center Director Update

    NASA Image and Video Library

    2014-03-06

    CAPE CANAVERAL, Fla. - Community leaders, business executives, educators, and state and local government leaders were updated on NASA Kennedy Space Center programs and accomplishments during Center Director Bob Cabana’s Center Director Update at the Debus Center at the Kennedy Space Center Visitor Complex in Florida. Attendees talk with Trey Carlson, Kennedy Master Planner, at the Center Planning and Development Directorate, or CPDD, display. In the background is Mario Busacca, chief of CPDD’s Spaceport Planning Office. Attendees talked with Cabana and other senior Kennedy managers and visited displays featuring updates on Kennedy programs and projects, including International Space Station, Commercial Crew, Ground System Development and Operations, Launch Services, Center Planning and Development, Technology, KSC Swamp Works and NASA Education. The morning concluded with a tour of the new Space Shuttle Atlantis exhibit at the visitor complex. For more information, visit http://www.nasa.gov/kennedy. Photo credit: NASA/Daniel Casper

  10. The 2010 Canadian Cardiovascular Society guidelines for the diagnosis and management of heart failure update: Heart failure in ethnic minority populations, heart failure and pregnancy, disease management, and quality improvement/assurance programs

    PubMed Central

    Howlett, Jonathan G; McKelvie, Robert S; Costigan, Jeannine; Ducharme, Anique; Estrella-Holder, Estrellita; Ezekowitz, Justin A; Giannetti, Nadia; Haddad, Haissam; Heckman, George A; Herd, Anthony M; Isaac, Debra; Kouz, Simon; Leblanc, Kori; Liu, Peter; Mann, Elizabeth; Moe, Gordon W; O’Meara, Eileen; Rajda, Miroslav; Siu, Samuel; Stolee, Paul; Swiggum, Elizabeth; Zeiroth, Shelley

    2010-01-01

    Since 2006, the Canadian Cardiovascular Society heart failure (HF) guidelines have published annual focused updates for cardiovascular care providers. The 2010 Canadian Cardiovascular Society HF guidelines update focuses on an increasing issue in the western world – HF in ethnic minorities – and in an uncommon but important setting – the pregnant patient. Additionally, due to increasing attention recently given to the assessment of how care is delivered and measured, two critically important topics – disease management programs in HF and quality assurance – have been included. Both of these topics were written from a clinical perspective. It is hoped that the present update will become a useful tool for health care providers and planners in the ongoing evolution of care for HF patients in Canada. PMID:20386768

  11. 32 CFR 507.9 - Articles not authorized for manufacture or sale.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Articles not authorized for manufacture or sale... CIVIL AUTHORITIES AND PUBLIC RELATIONS MANUFACTURE AND SALE OF DECORATIONS, MEDALS, BADGES, INSIGNIA, COMMERCIAL USE OF HERALDIC DESIGNS AND HERALDIC QUALITY CONTROL PROGRAM Manufacture and Sale of Decorations...

  12. 32 CFR 507.8 - Articles authorized for manufacture and sale.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 3 2010-07-01 2010-07-01 true Articles authorized for manufacture and sale. 507... CIVIL AUTHORITIES AND PUBLIC RELATIONS MANUFACTURE AND SALE OF DECORATIONS, MEDALS, BADGES, INSIGNIA, COMMERCIAL USE OF HERALDIC DESIGNS AND HERALDIC QUALITY CONTROL PROGRAM Manufacture and Sale of Decorations...

  13. 40 CFR 1039.625 - What requirements apply under the program for equipment-manufacturer flexibility?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... in this section only if you have primary responsibility for designing and manufacturing equipment and... specifically to companies that manufacture equipment outside the United States and to companies that import such equipment without manufacturing it. Engines and equipment you produce under this section are...

  14. 76 FR 30751 - Bureau of Political-Military Affairs: Directorate of Defense Trade Controls; Notifications to the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-26

    ... transmitting, herewith, certification of a proposed manufacturing license agreement for the manufacture of... services to support the design, manufacture and delivery of the Es'Hail Satellite Program. The United... defense articles, including technical data, and defense services to support the design, manufacture...

  15. Work with Us | Advanced Manufacturing Research | NREL

    Science.gov Websites

    advanced manufacturing R&D project through analysis and our world-class facilities. Contact Us Headshot of a man Matthew Ringer Laboratory Program Manager, Advanced Manufacturing Email | 303-275-4469 facilities for your advanced manufacturing R&D projects. License Our Technologies See our technologies

  16. 10 CFR 611.207 - Small automobile and component manufacturers.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 10 Energy 4 2011-01-01 2011-01-01 false Small automobile and component manufacturers. 611.207... VEHICLES MANUFACTURER ASSISTANCE PROGRAM Facility/Funding Awards § 611.207 Small automobile and component... individuals; and (2) Manufactures automobiles or components of automobiles. (b) Set Aside—Of the amount of...

  17. 10 CFR 611.207 - Small automobile and component manufacturers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Small automobile and component manufacturers. 611.207... VEHICLES MANUFACTURER ASSISTANCE PROGRAM Facility/Funding Awards § 611.207 Small automobile and component... individuals; and (2) Manufactures automobiles or components of automobiles. (b) Set Aside—Of the amount of...

  18. 10 CFR 611.207 - Small automobile and component manufacturers.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 10 Energy 4 2012-01-01 2012-01-01 false Small automobile and component manufacturers. 611.207... VEHICLES MANUFACTURER ASSISTANCE PROGRAM Facility/Funding Awards § 611.207 Small automobile and component... individuals; and (2) Manufactures automobiles or components of automobiles. (b) Set Aside—Of the amount of...

  19. 10 CFR 611.207 - Small automobile and component manufacturers.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 10 Energy 4 2014-01-01 2014-01-01 false Small automobile and component manufacturers. 611.207... VEHICLES MANUFACTURER ASSISTANCE PROGRAM Facility/Funding Awards § 611.207 Small automobile and component... individuals; and (2) Manufactures automobiles or components of automobiles. (b) Set Aside—Of the amount of...

  20. 10 CFR 611.207 - Small automobile and component manufacturers.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 10 Energy 4 2013-01-01 2013-01-01 false Small automobile and component manufacturers. 611.207... VEHICLES MANUFACTURER ASSISTANCE PROGRAM Facility/Funding Awards § 611.207 Small automobile and component... individuals; and (2) Manufactures automobiles or components of automobiles. (b) Set Aside—Of the amount of...

  1. LANDFIRE 2010—Updates to the national dataset to support improved fire and natural resource management

    USGS Publications Warehouse

    Nelson, Kurtis J.; Long, Donald G.; Connot, Joel A.

    2016-02-29

    The Landscape Fire and Resource Management Planning Tools (LANDFIRE) 2010 data release provides updated and enhanced vegetation, fuel, and fire regime layers consistently across the United States. The data represent landscape conditions from approximately 2010 and are the latest release in a series of planned updates to maintain currency of LANDFIRE data products. Enhancements to the data products included refinement of urban areas by incorporating the National Land Cover Database 2006 land cover product, refinement of agricultural lands by integrating the National Agriculture Statistics Service 2011 cropland data layer, and improved wetlands delineations using the National Land Cover Database 2006 land cover and the U.S. Fish and Wildlife Service National Wetlands Inventory data. Disturbance layers were generated for years 2008 through 2010 using remotely sensed imagery, polygons representing disturbance events submitted by local organizations, and fire mapping program data such as the Monitoring Trends in Burn Severity perimeters produced by the U.S. Geological Survey and the U.S. Forest Service. Existing vegetation data were updated to account for transitions in disturbed areas and to account for vegetation growth and succession in undisturbed areas. Surface and canopy fuel data were computed from the updated vegetation type, cover, and height and occasionally from potential vegetation. Historical fire frequency and succession classes were also updated. Revised topographic layers were created based on updated elevation data from the National Elevation Dataset. The LANDFIRE program also released a new Web site offering updated content, enhanced usability, and more efficient navigation.

  2. Evaluation of Lower East Fork Poplar Creek Mercury Sources - Model Update

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ketelle, Richard; Brandt, Craig C.; Peterson, Mark J.

    The purpose of this report is to assess new data that has become available and provide an update to the evaluations and modeling presented in the Oak Ridge National Laboratory (ORNL) Technical Manuscript Evaluation of lower East Fork Poplar Creek (LEFPC) Mercury Sources (Watson et al., 2016). Primary sources of field and laboratory data for this update include multiple US Department of Energy (DOE) programs including Environmental Management (EM; e.g., Biological Monitoring and Abatement Program, Mercury Remediation Technology Development [TD], and Applied Field Research Initiative), Office of Science (Mercury Science Focus Areas [SFA] project), and the Y-12 National Security Complexmore » (Y-12) Compliance Department.« less

  3. Optimal tracking control for a class of nonlinear discrete-time systems with time delays based on heuristic dynamic programming.

    PubMed

    Zhang, Huaguang; Song, Ruizhuo; Wei, Qinglai; Zhang, Tieyan

    2011-12-01

    In this paper, a novel heuristic dynamic programming (HDP) iteration algorithm is proposed to solve the optimal tracking control problem for a class of nonlinear discrete-time systems with time delays. The novel algorithm contains state updating, control policy iteration, and performance index iteration. To get the optimal states, the states are also updated. Furthermore, the "backward iteration" is applied to state updating. Two neural networks are used to approximate the performance index function and compute the optimal control policy for facilitating the implementation of HDP iteration algorithm. At last, we present two examples to demonstrate the effectiveness of the proposed HDP iteration algorithm.

  4. 77 FR 2275 - Manufacturing Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-01-17

    ... DEPARTMENT OF COMMERCE International Trade Administration Manufacturing Council AGENCY... candidate's proven experience in promoting, developing and marketing programs in support of manufacturing... participating in Council meetings and events are responsible for their travel, living and other personal...

  5. 76 FR 33244 - Manufacturing Council

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-06-08

    ... DEPARTMENT OF COMMERCE International Trade Administration Manufacturing Council AGENCY... experience in promoting, developing and marketing programs in support of manufacturing industries, in job... Council meetings and events are responsible for their travel, living and other personal expenses. Meetings...

  6. Asnuntuck Community College's Machine Technology Certificate and Degree Programs.

    ERIC Educational Resources Information Center

    Irlen, Harvey S.; Gulluni, Frank D.

    2002-01-01

    States that although manufacturing remains a viable sector in Connecticut, it is experiencing skills shortages in the workforce. Describes the machine technology program's purpose, the development of the Asnuntuck Community College's (Connecticut) partnership with private sector manufacturers, the curriculum, the outcomes, and benefits of…

  7. Process description language: an experiment in robust programming for manufacturing systems

    NASA Astrophysics Data System (ADS)

    Spooner, Natalie R.; Creak, G. Alan

    1998-10-01

    Maintaining stable, robust, and consistent software is difficult in face of the increasing rate of change of customers' preferences, materials, manufacturing techniques, computer equipment, and other characteristic features of manufacturing systems. It is argued that software is commonly difficult to keep up to date because many of the implications of these changing features on software details are obscure. A possible solution is to use a software generation system in which the transformation of system properties into system software is made explicit. The proposed generation system stores the system properties, such as machine properties, product properties and information on manufacturing techniques, in databases. As a result this information, on which system control is based, can also be made available to other programs. In particular, artificial intelligence programs such as fault diagnosis programs, can benefit from using the same information as the control system, rather than a separate database which must be developed and maintained separately to ensure consistency. Experience in developing a simplified model of such a system is presented.

  8. Manufacturing Process Development for Dust and Rain Erosion Resistant Coated Metallic Clads for Helicopter Rotors

    DTIC Science & Technology

    1980-06-01

    program is to develop, on a timely basis, manufacturing processes, techniques and equipment for use in production of Army materiel. Comments are...solicited on the potential utilization of the information contained herein as applied to present and/or future production programs. Such comments should be...manufacturers in this report shall not be construed as advertising nor as an official indorsement or approval of such products or companies by the United

  9. The Air Force Manufacturing Technology (MANTECH): Technology transfer methodology as exemplified by the radar transmit/receive module program

    NASA Technical Reports Server (NTRS)

    Houpt, Tracy; Ridgely, Margaret

    1991-01-01

    The Air Force Manufacturing Technology program is involved with the improvement of radar transmit/receive modules for use in active phased array radars for advanced fighter aircraft. Improvements in all areas of manufacture and test of these modules resulting in order of magnitude improvements in the cost of and the rate of production are addressed, as well as the ongoing transfer of this technology to the Navy.

  10. Resident Education Curriculum in Pediatric and Adolescent Gynecology: The Short Curriculum 2.0.

    PubMed

    Talib, Hina J; Karjane, Nicole; Teelin, Karen; Abraham, Margaret; Holt, Stephanie; Chelvakumar, Gayaythri; Dumont, Tania; Huguelet, Patricia S; Conner, Lindsay; Wheeler, Carol; Fleming, Nathalie

    2018-04-01

    The degree of exposure to pediatric and adolescent gynecology (PAG) varies across residency programs in obstetrics and gynecology and pediatrics. Nevertheless, these programs are responsible for training residents and providing opportunities within their programs to fulfill PAG learning objectives. To that end, the North American Society for Pediatric and Adolescent Gynecology has taken a leadership role in PAG resident education by creating and systematically updating the Short Curriculum. This curriculum outlines specific learning objectives that are central to PAG education and lists essential resources for learners' reference. This updated curriculum replaces the previous 2014 publication with added content, resources, and updated references. Additionally, attention to the needs of learners in pediatrics and adolescent medicine is given greater emphasis in this revised North American Society for Pediatric and Adolescent Gynecology Short Curriculum 2.0. Copyright © 2017 North American Society for Pediatric and Adolescent Gynecology. Published by Elsevier Inc. All rights reserved.

  11. Clean Energy Financing Programs: A Decision Resource for States and Communities

    EPA Pesticide Factsheets

    Describes financing-program options, key components of financing programs, and factors for states and communities to consider as they make decisions about getting started or updating their clean energy financing programs.

  12. 77 FR 52316 - U.S. Air Force Academy Board of Visitors; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-08-29

    ...; Superintendent's Update; Character Update; USAFA Sexual Assault Prevention and Response Program; Critical Thinking Assessment Tool; and the Diversity in the Dean's Faculty brief. In accordance with 5 U.S.C. 552b...

  13. 77 FR 25686 - Malcolm Baldrige National Quality Award Board of Overseers and Panel of Judges

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-01

    ..., Baldrige Enterprise Update, Judges Panel Update, Baldrige Fellows Program Discussion, and Strategic Planning. DATES: The meeting will convene on Thursday, June 14, 2012, at 8:30 a.m. Eastern time and adjourn...

  14. Crispen's Five Antivirus Rules.

    ERIC Educational Resources Information Center

    Crispen, Patrick Douglas

    2000-01-01

    Provides rules for protecting computers from viruses, Trojan horses, or worms. Topics include purchasing commercial antivirus programs and keeping them updated; updating virus definitions weekly; precautions before opening attached files; macro virus protection in Microsoft Word; and precautions with executable files. (LRW)

  15. Costs, Benefits, and Adoption of Additive Manufacturing: A Supply Chain Perspective

    PubMed Central

    Thomas, Douglas

    2017-01-01

    There are three primary aspects to the economics of additive manufacturing: measuring the value of goods produced, measuring the costs and benefits of using the technology, and estimating the adoption and diffusion of the technology. This paper provides an updated estimate of the value of goods produced. It then reviews the literature on additive manufacturing costs and identifies those instances in the literature where this technology is cost effective. The paper then goes on to propose an approach for examining and understanding the societal costs and benefits of this technology both from a monetary viewpoint and a resource consumption viewpoint. The final section discusses the trends in the adoption of additive manufacturing. Globally, there is an estimated $667 million in value added produced using additive manufacturing, which equates to 0.01 % of total global manufacturing value added. US value added is estimated as $241 million. Current research on additive manufacturing costs reveals that it is cost effective for manufacturing small batches with continued centralized production; however, with increased automation distributed production may become cost effective. Due to the complexities of measuring additive manufacturing costs and data limitations, current studies are limited in their scope. Many of the current studies examine the production of single parts and those that examine assemblies tend not to examine supply chain effects such as inventory and transportation costs along with decreased risk to supply disruption. The additive manufacturing system and the material costs constitute a significant portion of an additive manufactured product; however, these costs are declining over time. The current trends in costs and benefits have resulted in this technology representing 0.02 % of the relevant manufacturing industries in the US; however, as the costs of additive manufacturing systems decrease, this technology may become widely adopted and change the supplier, manufacturer, and consumer interactions. An examination in the adoption of additive manufacturing reveals that for this technology to exceed $4.4 billion in 2020, $16.0 billion in 2025, and $196.8 billion in 2035 it would need to deviate from its current trends of adoption. PMID:28747809

  16. Costs, Benefits, and Adoption of Additive Manufacturing: A Supply Chain Perspective.

    PubMed

    Thomas, Douglas

    2016-07-01

    There are three primary aspects to the economics of additive manufacturing: measuring the value of goods produced, measuring the costs and benefits of using the technology, and estimating the adoption and diffusion of the technology. This paper provides an updated estimate of the value of goods produced. It then reviews the literature on additive manufacturing costs and identifies those instances in the literature where this technology is cost effective. The paper then goes on to propose an approach for examining and understanding the societal costs and benefits of this technology both from a monetary viewpoint and a resource consumption viewpoint. The final section discusses the trends in the adoption of additive manufacturing. Globally, there is an estimated $667 million in value added produced using additive manufacturing, which equates to 0.01 % of total global manufacturing value added. US value added is estimated as $241 million. Current research on additive manufacturing costs reveals that it is cost effective for manufacturing small batches with continued centralized production; however, with increased automation distributed production may become cost effective. Due to the complexities of measuring additive manufacturing costs and data limitations, current studies are limited in their scope. Many of the current studies examine the production of single parts and those that examine assemblies tend not to examine supply chain effects such as inventory and transportation costs along with decreased risk to supply disruption. The additive manufacturing system and the material costs constitute a significant portion of an additive manufactured product; however, these costs are declining over time. The current trends in costs and benefits have resulted in this technology representing 0.02 % of the relevant manufacturing industries in the US; however, as the costs of additive manufacturing systems decrease, this technology may become widely adopted and change the supplier, manufacturer, and consumer interactions. An examination in the adoption of additive manufacturing reveals that for this technology to exceed $4.4 billion in 2020, $16.0 billion in 2025, and $196.8 billion in 2035 it would need to deviate from its current trends of adoption.

  17. Development of Improved Composite Pressure Vessels for Hydrogen Storage

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Newhouse, Norman L.

    2016-04-29

    Hexagon Lincoln started this DOE project as part of the Hydrogen Storage Engineering Center of Excellence (HSECoE) contract on 1 February 2009. The purpose of the HSECoE was the research and development of viable material based hydrogen storage systems for on-board vehicular applications to meet DOE performance and cost targets. A baseline design was established in Phase 1. Studies were then conducted to evaluate potential improvements, such as alternate fiber, resin, and boss materials. The most promising concepts were selected such that potential improvements, compared with the baseline Hexagon Lincoln tank, resulted in a projected weight reduction of 11 percent,more » volume increase of 4 percent, and cost reduction of 10 percent. The baseline design was updated in Phase 2 to reflect design improvements and changes in operating conditions specified by HSECoE Partners. Evaluation of potential improvements continued during Phase 2. Subscale prototype cylinders were designed and fabricated for HSECoE Partners’ use in demonstrating their components and systems. Risk mitigation studies were conducted in Phase 3 that focused on damage tolerance of the composite reinforcement. Updated subscale prototype cylinders were designed and manufactured to better address the HSECoE Partners’ requirements for system demonstration. Subscale Type 1, Type 3, and Type 4 tanks were designed, fabricated and tested. Laboratory tests were conducted to evaluate vacuum insulated systems for cooling the tanks during fill, and maintaining low temperatures during service. Full scale designs were prepared based on results from the studies of this program. The operating conditions that developed during the program addressed adsorbent systems operating at cold temperatures. A Type 4 tank would provide the lowest cost and lightest weight, particularly at higher pressures, as long as issues with liner compatibility and damage tolerance could be resolved. A Type 1 tank might be the choice if the liner and damage tolerance issues were not resolved, particularly if the operating pressure was reduced.« less

  18. 40 CFR 86.1823-01 - Durability demonstration procedures for exhaust emissions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) Discussion of the manufacturer's in-use verification procedures including testing performed, vehicle... performed should also be documented in the manufacturer's submission. The in-use verification program shall...), the Alternate Service Accumulation Durability Program described in § 86.094-13(e) or the Standard Self...

  19. Training a New Breed of Automated Manufacturing Technology Practitioners.

    ERIC Educational Resources Information Center

    Bainter, Jack J.

    1986-01-01

    A boom in industrial robotics has led numerous vocational institutions to launch extensive training programs in this specialty. ITT Educational Services offers two curriculum programs to train future manufacturing engineers. The firm's national director describes this model curriculum for meeting the needs of today's workforce. (JN)

  20. Cost Benefit Studies. Final Report.

    ERIC Educational Resources Information Center

    Weiner, Arthur; Marson, Arthur A.

    This document applies Dr. Mehar Aurora's method for conducting cost benefit studies to the Food Manufacturing Technology-Dairy and the Food Manufacturing Technology-Canning and Freezing programs offered by the Moraine Park Technical Institute. Costs to individual students enrolled in the programs include tuition, fees, housing, travel, books,…

  1. Estimating Prices of Products

    NASA Technical Reports Server (NTRS)

    Aster, R. W.; Chamberlain, R. G.; Zendejas, S. C.; Lee, T. S.; Malhotra, S.

    1986-01-01

    Company-wide or process-wide production simulated. Price Estimation Guidelines (IPEG) program provides simple, accurate estimates of prices of manufactured products. Simplification of SAMIS allows analyst with limited time and computing resources to perform greater number of sensitivity studies. Although developed for photovoltaic industry, readily adaptable to standard assembly-line type of manufacturing industry. IPEG program estimates annual production price per unit. IPEG/PC program written in TURBO PASCAL.

  2. Voluntary Folic Acid Fortification Levels and Nutrient Composition of Food Products from the Spanish Market: A 2011–2015 Update

    PubMed Central

    Samaniego-Vaesken, María Lourdes; Alonso-Aperte, Elena; Varela-Moreiras, Gregorio

    2017-01-01

    Introduction. Folic acid (FA) is a synthetic compound commonly added for voluntary fortification of food products in many European countries. In our country, food composition databases (FCDB) lack comprehensive data on FA fortification practices and this is considered a priority research need when undergoing nutritional assessment of the population. Methods. A product inventory was collected and updated by visiting retail stores in Madrid Region, conducting online supermarket searches, and by the provision of food label information by manufacturers. Euro-FIR FCDB guidelines for data compilation and harmonization were used. Results. The FCDB, compiled between 2011 and 2015, includes FA as well as macro and micronutrient data from 338 fortified foodstuffs. As compared to previous FCDB updates (May 2010), 37 products have ceased to declare added FA in their labels, mainly yogurt and fermented milk products. The main food subgroup is ‘breakfast cereals’ (n = 95, 34% of total). However, the highest average FA fortification levels per recommended serving were observed in the ‘milk, milk products, and milk substitutes’ group at ≥35% FA Nutrient Reference Values (NRV, 200 µg, EU Regulation 1169 of 2011) (60–76.3 µg FA per 200 mL). Average contribution to the FA NRV per food group and serving ranged between 16%–35%. Conclusion. Our data show a minor decrease in the number of FA fortified products, but vitamin levels added by manufacturers are stable in most food groups and subgroups. This representative product inventory comprises the main FA food source from voluntary fortification in our country. It is therefore a unique compilation tool with valuable data for the assessment of dietary intakes for the vitamin. PMID:28273872

  3. An Innovative Strategy for Accurate Thermal Compensation of Gyro Bias in Inertial Units by Exploiting a Novel Augmented Kalman Filter

    PubMed Central

    Angrisani, Leopoldo; Simone, Domenico De

    2018-01-01

    This paper presents an innovative model for integrating thermal compensation of gyro bias error into an augmented state Kalman filter. The developed model is applied in the Zero Velocity Update filter for inertial units manufactured by exploiting Micro Electro-Mechanical System (MEMS) gyros. It is used to remove residual bias at startup. It is a more effective alternative to traditional approach that is realized by cascading bias thermal correction by calibration and traditional Kalman filtering for bias tracking. This function is very useful when adopted gyros are manufactured using MEMS technology. These systems have significant limitations in terms of sensitivity to environmental conditions. They are characterized by a strong correlation of the systematic error with temperature variations. The traditional process is divided into two separated algorithms, i.e., calibration and filtering, and this aspect reduces system accuracy, reliability, and maintainability. This paper proposes an innovative Zero Velocity Update filter that just requires raw uncalibrated gyro data as input. It unifies in a single algorithm the two steps from the traditional approach. Therefore, it saves time and economic resources, simplifying the management of thermal correction process. In the paper, traditional and innovative Zero Velocity Update filters are described in detail, as well as the experimental data set used to test both methods. The performance of the two filters is compared both in nominal conditions and in the typical case of a residual initial alignment bias. In this last condition, the innovative solution shows significant improvements with respect to the traditional approach. This is the typical case of an aircraft or a car in parking conditions under solar input. PMID:29735956

  4. An Innovative Strategy for Accurate Thermal Compensation of Gyro Bias in Inertial Units by Exploiting a Novel Augmented Kalman Filter.

    PubMed

    Fontanella, Rita; Accardo, Domenico; Moriello, Rosario Schiano Lo; Angrisani, Leopoldo; Simone, Domenico De

    2018-05-07

    This paper presents an innovative model for integrating thermal compensation of gyro bias error into an augmented state Kalman filter. The developed model is applied in the Zero Velocity Update filter for inertial units manufactured by exploiting Micro Electro-Mechanical System (MEMS) gyros. It is used to remove residual bias at startup. It is a more effective alternative to traditional approach that is realized by cascading bias thermal correction by calibration and traditional Kalman filtering for bias tracking. This function is very useful when adopted gyros are manufactured using MEMS technology. These systems have significant limitations in terms of sensitivity to environmental conditions. They are characterized by a strong correlation of the systematic error with temperature variations. The traditional process is divided into two separated algorithms, i.e., calibration and filtering, and this aspect reduces system accuracy, reliability, and maintainability. This paper proposes an innovative Zero Velocity Update filter that just requires raw uncalibrated gyro data as input. It unifies in a single algorithm the two steps from the traditional approach. Therefore, it saves time and economic resources, simplifying the management of thermal correction process. In the paper, traditional and innovative Zero Velocity Update filters are described in detail, as well as the experimental data set used to test both methods. The performance of the two filters is compared both in nominal conditions and in the typical case of a residual initial alignment bias. In this last condition, the innovative solution shows significant improvements with respect to the traditional approach. This is the typical case of an aircraft or a car in parking conditions under solar input.

  5. Voluntary Folic Acid Fortification Levels and Nutrient Composition of Food Products from the Spanish Market: A 2011-2015 Update.

    PubMed

    Samaniego-Vaesken, María Lourdes; Alonso-Aperte, Elena; Varela-Moreiras, Gregorio

    2017-03-05

    Folic acid (FA) is a synthetic compound commonly added for voluntary fortification of food products in many European countries. In our country, food composition databases (FCDB) lack comprehensive data on FA fortification practices and this is considered a priority research need when undergoing nutritional assessment of the population. A product inventory was collected and updated by visiting retail stores in Madrid Region, conducting online supermarket searches, and by the provision of food label information by manufacturers. Euro-FIR FCDB guidelines for data compilation and harmonization were used. The FCDB, compiled between 2011 and 2015, includes FA as well as macro and micronutrient data from 338 fortified foodstuffs. As compared to previous FCDB updates (May 2010), 37 products have ceased to declare added FA in their labels, mainly yogurt and fermented milk products. The main food subgroup is 'breakfast cereals' ( n = 95, 34% of total). However, the highest average FA fortification levels per recommended serving were observed in the 'milk, milk products, and milk substitutes' group at ≥35% FA Nutrient Reference Values (NRV, 200 µg, EU Regulation 1169 of 2011) (60-76.3 µg FA per 200 mL). Average contribution to the FA NRV per food group and serving ranged between 16%-35%. Our data show a minor decrease in the number of FA fortified products, but vitamin levels added by manufacturers are stable in most food groups and subgroups. This representative product inventory comprises the main FA food source from voluntary fortification in our country. It is therefore a unique compilation tool with valuable data for the assessment of dietary intakes for the vitamin.

  6. Update of the mortality study of workers exposed to polychlorinated biphenyls (Pcbs) in two Italian capacitor manufacturing plants.

    PubMed

    Pesatori, Angela Cecilia; Grillo, P; Consonni, D; Caironi, M; Sampietro, G; Olivari, Leonella; Ghisleni, Silvia; Bertazzi, P A

    2013-01-01

    PCB carcinogenicity to humans is still controversial. Cohort mortality studies in PCB-exposed workers reported elevated risks for the following causes of death: liver, stomach, digestive, brain, prostate cancers and non-Hodgkin lymphoma. The purpose of this study was to update as of December 2006 the mortality experience of two Italian cohorts of workers employed in the manufacture of capacitors impregnated with PCBs. Age-gender-and calendar period adjusted Standardized Mortality Ratios (SMRs) and 95% Confidence Intervals (CI) were calculated using regional rates. Analyses by duration of employment and time since first employment were performed Results: Vital status was ascertained for 98.9% of the study subjects. Mortality from biliary tract cancer among males (SMR 3.91; 95%CI 1.47-10.41), digestive cancer "not otherwise specified" in the whole cohort (SMR 2.54; 95%CI 1.21-5.34), and brain cancer in Plant I (SMR 2.13; 95%CI 1.02-4.48), were significantly increased. Increased risks were also observed for Hodgkin's and non-Hodgkin lymphoma. No linear associations between mortality and duration of employment or latency were observed for these cancers. Mortality from stomach cancer did not differ from expectation in the whole cohort, however an increasing risk with increasing duration of employment was detected (p for trend=0.02). The current update suggests possibly increased cancer risks in PCB-exposed workers, affecting in particular the digestive system, brain, and lymphohemopoietic tissue. However the limited sample size, the lack of clear trends with duration of employment or with latency period, preclude to derive definite conclusions about PCB exposure and the increased cancer risks.

  7. Composite and Nanocomposite Metal Foams

    PubMed Central

    Duarte, Isabel; Ferreira, José M. F.

    2016-01-01

    Open-cell and closed-cell metal foams have been reinforced with different kinds of micro- and nano-sized reinforcements to enhance their mechanical properties of the metallic matrix. The idea behind this is that the reinforcement will strengthen the matrix of the cell edges and cell walls and provide high strength and stiffness. This manuscript provides an updated overview of the different manufacturing processes of composite and nanocomposite metal foams. PMID:28787880

  8. OAO battery data analysis

    NASA Technical Reports Server (NTRS)

    Gaston, S.; Wertheim, M.; Orourke, J. A.

    1973-01-01

    Summary, consolidation and analysis of specifications, manufacturing process and test controls, and performance results for OAO-2 and OAO-3 lot 20 Amp-Hr sealed nickel cadmium cells and batteries are reported. Correlation of improvements in control requirements with performance is a key feature. Updates for a cell/battery computer model to improve performance prediction capability are included. Applicability of regression analysis computer techniques to relate process controls to performance is checked.

  9. Paperless Procurement: The Impact of Advanced Automation

    DTIC Science & Technology

    1992-09-01

    System. POPS = Paperless Order Processing System; RADMIS = Research and Development Management Information System; SAACONS=Standard Army Automated... order processing system, which then updates the contractor’s production (or delivery) scheduling and contract accounting applications. In return, the...used by the DLA’s POPS. 3-5 into an EDI delivery order and pass it directly to the distributor’s or manufacturer’s order processing system. That

  10. High-temperature lubricants. January 1970-January 1989 (Citations from the US Patent data base). Report for January 1970-January 1989

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1989-02-01

    This bibliography contains citations of selected patents concerning high-temperature synthetic and natural lubricating compositions. Thickening agents, thermal stabilizers, polymeric additives, antioxidants, and preservatives are included relative to such lubricants as greases, oils, and soaps. Methods of manufacturing and various applications are included. (This updated bibliography contains 80 citations, 12 of which are new entries to the previous edition.)

  11. Industrial Arts 7-9. Manufacturing: Metalwork, Plastics, Woodwork, Manufacturing.

    ERIC Educational Resources Information Center

    Manitoba Dept. of Education, Winnipeg. Div. of Vocational Education.

    This curriculum guide provides materials for the industrial arts (grades 7-9) subject cluster of manufacturing. This subject cluster has four areas of study: metalwork, plastics, woodwork, and manufacturing. Introductory materials include an overview of the industrial arts curriculum in its entirety, a listing of program objectives for each of the…

  12. Updating and expanding the library of materials on NASA Spacelink electronic information system

    NASA Technical Reports Server (NTRS)

    Blake, Jean A.

    1992-01-01

    NASA Spacelink, a proven resource medium, may be accessed over telephone lines or via the Internet by teachers or anyone with a computer or modem. It is a collection of historical and current information on NASA programs and activities. Included in this library is information on a variety of NASA programs, updates on Shuttle status, news releases, aeronautics, space exploration, classroom materials, NASA Educational Services, and computer programs and graphics. The material stored in Spacelink has found widespread use by teachers and others, and is being used to stimulate students, particularly in the area of aerospace science.

  13. PowerGuard® manufacturing innovation and expansion

    NASA Astrophysics Data System (ADS)

    Dinwoodie, Thomas; Kleiner, Tim; O'Brien, Colleen; Quiroz, Maurice

    1999-03-01

    PowerLight Corporation, with support from the DOE's PVMaT program, has undertaken a comprehensive agenda to automate the manufacture of its PowerGuard PV roof tile system. The advanced manufacturing will lead to substantially reduced costs, quality improvements, and increased production capacity. Over the three years of the PVMaT contract, system costs are expected to fall 2.65/Wp, with annual production capability increasing from 5 to 16 MW. PowerLight is on schedule with meeting its objectives under this program.

  14. Nastran level 16 theoretical manual updates for aeroelastic analysis of bladed discs

    NASA Technical Reports Server (NTRS)

    Elchuri, V.; Smith, G. C. C.

    1980-01-01

    A computer program based on state of the art compressor and structural technologies applied to bladed shrouded disc was developed and made operational in NASTRAN Level 16. Aeroelastic analyses, modes and flutter. Theoretical manual updates are included.

  15. 49 CFR 390.203 - PRISM State registration/biennial updates.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... the Performance and Registration Information Systems Management (PRISM) program (authorized under... FEDERAL MOTOR CARRIER SAFETY REGULATIONS; GENERAL Unified Registration System § 390.203 PRISM State... procedures, provided the State has integrated the USDOT registration/update capability into its vehicle...

  16. 49 CFR 390.203 - PRISM State registration/biennial updates.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... the Performance and Registration Information Systems Management (PRISM) program (authorized under... FEDERAL MOTOR CARRIER SAFETY REGULATIONS; GENERAL Unified Registration System § 390.203 PRISM State... procedures, provided the State has integrated the USDOT registration/update capability into its vehicle...

  17. 75 FR 2515 - TRICARE, Formerly Known as the Civilian Health and Medical Program of the Uniformed Services...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-15

    ...: This notice provides the updated regional per diem rates for low volume mental health providers; the... beneficiary per-diem cost-share amount for low-volume providers; and the updated per- [[Page 2516

  18. CNC Preparation Meets Manufacturing Opportunity

    ERIC Educational Resources Information Center

    Cassola, Joel

    2006-01-01

    This article features the machining technology program at Cape Fear Community College (CFCC) of Wilmington, North Carolina. North Carolina's Cape Fear Community College is working to meet diverse industry needs through its CNC training. The school's program has gained the attention of the local manufacturing community and students when it shifted…

  19. The Boeing Company's Manufacturing Technology Student Internship. Evaluation Report (1994-95).

    ERIC Educational Resources Information Center

    Wang, Changhua; Owens, Thomas R.

    An evaluation was conducted of the Boeing Company's summer internship program for students enrolled in a manufacturing technology program after grades 11, 12, and 13 (first year of community college). The evaluation included the following activities: a review of documents describing the internship structure, student selection process, and…

  20. 40 CFR 90.1203 - Voluntary Manufacturer In-Use Testing Program.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 20 2014-07-01 2013-07-01 true Voluntary Manufacturer In-Use Testing Program. 90.1203 Section 90.1203 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... encountered with typical use of the equipment as described in the owner's manual or other literature sold with...

  1. Proposal of Modification Strategy of NC Program in the Virtual Manufacturing Environment

    NASA Astrophysics Data System (ADS)

    Narita, Hirohisa; Chen, Lian-Yi; Fujimoto, Hideo; Shirase, Keiichi; Arai, Eiji

    Virtual manufacturing will be a key technology in process planning, because there are no evaluation tools for cutting conditions. Therefore, virtual machining simulator (VMSim), which can predict end milling processes, has been developed. The modification strategy of NC program using VMSim is proposed in this paper.

  2. Manufacturing Production: An Evaluation Report for the Occupational Exploration Program.

    ERIC Educational Resources Information Center

    Altschuld, James W.; And Others

    The evaluation report is one of seven produced for the Occupational Exploration Program (OEP), a series of simulated occupational experiences designed for junior high school students. Describing the pilot testing of the simulation dealing with manufacturing production, the report contains sections describing the simulation context, evaluation…

  3. Semiconductor Manufacturing Comes to Virginia: Developing Partnerships for Workforce Education and Training.

    ERIC Educational Resources Information Center

    Cantor, Jeffrey A.

    1998-01-01

    In Virginia, a community college consortium for semiconductor education and training programs works with a semiconductor manufacturers' partnership to review programs based on a national core curriculum model. The results are being used to improve curriculum development, faculty training, facility improvement, and student recruitment. (SK)

  4. 76 FR 21753 - Site Tours Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-18

    ... facilities involved in the growing, processing, or manufacturing of tobacco or tobacco products. These visits... regulate tobacco product manufacturing, distribution, and marketing. This includes, among other things, the authority to issue regulations related to health warnings, tobacco product standards, good manufacturing...

  5. Update 0.2 to "pysimm: A python package for simulation of molecular systems"

    NASA Astrophysics Data System (ADS)

    Demidov, Alexander G.; Fortunato, Michael E.; Colina, Coray M.

    2018-01-01

    An update to the pysimm Python molecular simulation API is presented. A major part of the update is the implementation of a new interface with CASSANDRA - a modern, versatile Monte Carlo molecular simulation program. Several significant improvements in the LAMMPS communication module that allow better and more versatile simulation setup are reported as well. An example of an application implementing iterative CASSANDRA-LAMMPS interaction is illustrated.

  6. Use of indexing to update United States annual timber harvest by state

    Treesearch

    James Howard; Enrique Quevedo; Andrew Kramp

    2009-01-01

    This report provides an index method that can be used to update recent estimates of timber harvest by state to a common current year and to make 5-year projections. The Forest Service Forest Inventory and Analysis (FIA) program makes estimates of harvest for each state in differing years. The purpose of this updating method is to bring each state-level estimate up to a...

  7. NASA Update for Unidata Stratcomm

    NASA Technical Reports Server (NTRS)

    Lynnes, Chris

    2017-01-01

    The NASA representative to the Unidata Strategic Committee presented a semiannual update on NASAs work with and use of Unidata technologies. The talk updated Unidata on the program of cloud computing prototypes underway for the Earth Observing System Data and Information System (EOSDIS). Also discussed was a trade study on the use of the Open source Project for a Network Data Access Protocol (OPeNDAP) with Web Object Storage in the cloud.

  8. Specifying and Verifying the Correctness of Dynamic Software Updates

    DTIC Science & Technology

    2011-11-15

    additional branching introduced by update points and the need to analyze the state transformer code. As tools become faster and more effective , our...It shows the effectiveness of merging-based verification on practical examples, including Redis [20], a widely deployed server program. 2 Defining...Gupta’s reachability while side -stepping the problem that reachability can leave behavior CS-TR-4997 under-constrained. For example, for the vsftpd update

  9. The National Shipbuilding Research Program. 1995 Ship Production Symposium. Paper No. 14: Spanish Shipbuilding: Restructuring Process and Technological Updating From 1984-1994

    DTIC Science & Technology

    1995-01-01

    disputes increased by the fact that the industrial restructuring process coincided with the return of a great number of Spanish workers who were emigrants in...INNOVATION MARINE INDUSTRY STANDARDS WELDING INDUSTRIAL ENGINEERING EDUCATION AND TRAINING THE NATIONAL SHIPBUILDING RESEARCH PROGRAM January, 1995 NSRP 0439...1995 Ship Production Symposium Paper No . 14: Spanish Shipbuilding: Restructuring Process & Technologi- cal Updating From 1984-1994 U.S. DEPARTMENT OF

  10. 2014 Edition Release 2 Electronic Health Record (EHR) certification criteria and the ONC HIT Certification Program; regulatory flexibilities, improvements, and enhanced health information exchange. Final rule.

    PubMed

    2014-09-11

    This final rule introduces regulatory flexibilities and general improvements for certification to the 2014 Edition EHR certification criteria (2014 Edition). It also codifies a few revisions and updates to the ONC HIT Certification Program for certification to the 2014 Edition and future editions of certification criteria as well as makes administrative updates to the Code of Federal Regulations.

  11. Dealing with large-scale supply lines when introducing new regimens.

    PubMed

    Malati, Christine; Rosenfeld, Joshua; Mowafy, Sherif; Rittmiller, Trevor; Kuritsky, Joel; Crowley, John

    2017-07-01

    As programs plan the introduction of a new antiretroviral as part of a regimen for HIV treatment, supply chain considerations need to be taken into account. The key to success is balancing the introduction of a new regimen with the phasing out of an old regimen in a manner that does not result in either a shortage or an excess supply of either product while ensuring that patients continue receiving their medications. This necessitates that country programs, donors, and procurement entities possess an appreciation of the global antiretroviral market and understand the dynamics that the manufacturing of new antiretrovirals will have on the transition. Supply, demand, and financial considerations affect the capacity of the supply chain to facilitate a successful antiretroviral transition. Although this commentary draws on United States Agency for International Development experiences under the President's Emergency Plan for AIDS Relief from earlier antiretroviral treatment shifts, the approaches are applicable to other institutions and to future transitions. Three approaches were employed: ensuring the engagement of all key stakeholders in transition planning and execution, including clinicians, advocacy groups, supply chain professionals, ministry, and donors; conducting and updating regularly the national quantification and supply plans for all regimens; and introducing antiretroviral products into programs from regional warehouses based on firm orders. Extensive planning and accounting for supply chain factors is essential to ensuring a smooth transition to a new regimen and to enable the global antiretroviral market to respond adequately.

  12. Status of NASA's Space Launch System

    NASA Technical Reports Server (NTRS)

    Honeycutt, John; Cook, Jerry; Lyles, Garry

    2016-01-01

    NASA's Space Launch System (SLS) continued to make significant progress in 2015, completing hardware and testing that brings NASA closer to a new era of deep space exploration. The most significant program milestone of the year was completion of Critical Design Review (CDR). A team of independent reviewers concluded that the vehicle design is technically and programmatically ready to move to Design Certification Review (DCR) and launch readiness in 2018. Just four years after program start, every major element has amassed development and flight hardware and completed key tests that will set the stage for a growing schedule of manufacturing and testing in 2016. Key to SLS' rapid progress has been the use of existing technologies adapted to the new launch vehicle. The space shuttle-heritage RS-25 engine is undergoing adaptation tests to prove it can meet SLS requirements and environments with minimal change. The four-segment shuttle-era booster has been modified and updated with an additional propellant segment, new insulation, and new avionics. The Interim Cryogenic Upper Stage is a modified version of an existing upper stage. The first Block I SLS configuration will launch a minimum of 70 metric tons of payload to low Earth orbit (LEO). The vehicle architecture has a clear evolutionary path to more than 100 metric tons and, ultimately, to 130 metric tons. Among the program's major accomplishments in 2015 were the first booster qualification hotfire test, a series of seven RS-25 adaptation hotfire tests, manufacturing of most of the major components for both core stage test articles and first flight tank, delivery of the Pegasus core stage barge, and the upper stage simulator. Renovations to the B-2 test stand for stage green run testing was completed at NASA Stennis Space Center. This year will see the second booster qualification motor hotfire, flight and additional development RS-25 engine tests, and completion of core stage test articles and test stands and several flight article sections. This paper will discuss these and other technical and programmatic successes and challenges over the past year and provide a preview of work ahead before the first flight of this new capability.

  13. Status of NASA's Space Launch System

    NASA Technical Reports Server (NTRS)

    Lyles, Garry

    2016-01-01

    NASA's Space Launch System (SLS) continued to make significant progress in 2015, completing hardware and testing that brings NASA closer to a new era of deep space exploration. The most significant program milestone of the year was completion of Critical Design Review (CDR). A team of independent reviewers concluded that the vehicle design is technically and programmatically ready to move to Design Certification Review (DCR) and launch readiness in 2018. Just four years after program start, every major element has amassed development and flight hardware and completed key tests that will set the stage for a growing schedule of manufacturing and testing in 2016. Key to SLS' rapid progress has been the use of existing technologies adapted to the new launch vehicle. The space shuttle-heritage RS-25 engine is undergoing adaptation tests to prove it can meet SLS requirements and environments with minimal change. The four-segment shuttle-era booster has been modified and updated with an additional propellant segment, new insulation, and new avionics. The Interim Cryogenic Upper Stage is a modified version of an existing upper stage. The first Block I SLS configuration will launch a minimum of 70 metric tons (t) of payload to low Earth orbit (LEO). The vehicle architecture has a clear evolutionary path to more than 100t and, ultimately, to 130t. Among the program's major accomplishments in 2015 were the first booster qualification hotfire test, a series of seven RS-25 adaptation hotfire tests, manufacturing of most of the major components for both core stage test articles and first flight tank, delivery of the Pegasus core stage barge, and the upper stage simulator. Renovations to the B-2 test stand for stage green run testing was completed at NASA Stennis Space Center. This year will see the second booster qualification motor hotfire, flight and additional development RS-25 engine tests, and completion of core stage test articles and test stands and several flight article sections. This paper will discuss these and other technical and programmatic successes and challenges over the past year and provide a preview of work ahead before the first flight of this new capability.

  14. Global R&D through the Intelligent Manufacturing Systems (IMS) program

    NASA Astrophysics Data System (ADS)

    Huray, Paul G.

    1997-01-01

    The industry-led, international intelligent manufacturing systems (IMS) program provides a special vehicle for joint research and development between government, industry and academia in the United States, Canada, Japan, Australia, and Europe. Since its beginning in 1989, the IMS program has progressed through a feasibility phase which demonstrated that international legal barriers, trade issues, and intellectual property problems could be overcome. The program is constructed to provide higher quality design, customized products, shorter delivery cycles and lower costs. Interactions between partner companies have led to new business opportunities for mutual profit and some claim to have learned strategic information about their international competitors. The IMS program is growing through the participation of hundreds of corporate and university partners who share responsibilities in specific projects and jointly reap benefits for their manufacturing products and processes. The logic for choosing or not choosing the IMS mechanisms will be discussed and R and D projects will be identified.

  15. The use of diacetyl (2,3-butanedione) and related flavoring substances as flavorings added to foods-Workplace safety issues.

    PubMed

    Hallagan, John B

    2017-08-01

    In 2001, staff of the National Institute of Occupational Safety and Health (NIOSH) identified diacetyl (2,3-butanedione) as a "marker" of exposure in a microwave popcorn manufacturing facility in which workers developed severe respiratory illness. Subsequent investigations identified additional workers in food and flavor manufacturing facilities also with severe respiratory illness. The flavor industry, NIOSH, and federal and state regulators conducted significant programs to address workplace safety concerns related to the manufacture of flavors and foods containing added flavors. These programs, initiated in 2001, continue today. Key to the success of these programs is understanding what flavors added to foods are and how they are manufactured, how they are incorporated into foods, the specific characteristics of diacetyl and related flavoring substances, and what actions may be taken to assure the safest workplaces possible. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Federal Geothermal Research Program Update Fiscal Year 2003

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    2004-03-01

    The Department of Energy (DOE) and its predecessors have conducted research and development (R&D) in geothermal energy since 1971. To develop the technology needed to harness the Nation's vast geothermal resources, DOE's Office of Geothermal Technologies oversees a network of national laboratories, industrial contractors, universities, and their subcontractors. The following mission and goal statements guide the overall activities of the Office. The goals are: (1) Reduce the levelized cost of generating geothermal power to 3-5 cents per kWh by 2007; (2) Double the number of States with geothermal electric power facilities to eight by 2006; and (3) Supply the electricalmore » power or heat energy needs of 7 million homes and businesses in the United States by 2010. This Federal Geothermal Program Research Update reviews the accomplishments of DOE's Geothermal Program for Federal Fiscal Year (FY) 2003. The information contained in this Research Update illustrates how the mission and goals of the Office of Geothermal Technologies are reflected in each R&D activity. The Geothermal Program, from its guiding principles to the most detailed research activities, is focused on expanding the use of geothermal energy. balanced strategy for the Geothermal Program.« less

  17. The AMCP Format for Formulary Submissions: Welcome to Version 4.0.

    PubMed

    2016-05-01

    Managed care pharmacists are increasingly presented with complex considerations related to prescription drug formulary management. As prescription drug spending soars, and new effective, but expensive drugs rush to the market, pharmacists and other health care decision makers must evaluate a myriad of important clinical and economic considerations in determining the relative value and, subsequently, the appropriate placement of a product within a formulary. The AMCP Format for Formulary Submissions, Version 4.0, is the next iteration of the Format, which was first released in 2000. Version 4.0, developed by pharmacists from health plan, manufacturer, and academic perspectives, provides updated recommendations on acquiring and evaluating clinical and economic evidence to inform formulary and medical policy decisions. It also includes new guidance related to emerging special topic considerations such as biosimilars, specialty pharmacy products, and companion diagnostic tests. Version 4.0 has been modified to improve the usability of the Format, with clarifying guidance related to logistical considerations such as a recommended time frame for implementation of Version 4.0, as well as dossier updates and ongoing communication between manufacturers and health care decision makers. The Format should be used as a framework for ongoing evidence-based dialogue between manufacturers and payers. The evolving health care landscape will require new levels of collaboration and communication among key stakeholders to successfully navigate the challenges of this new environment. The Format provides a framework to support these critical interactions related to product value by facilitating an evidence-based, transparent approach. This document was prepared by Jeff Lee, PharmD, FCCP, on behalf of the AMCP Format Executive Committee. Committee members reviewed and provided feedback on the final draft. No conflicts of interest, financial or otherwise, were reported.

  18. Interrupted object-based updating of reach program leads to a negative compatibility effect.

    PubMed

    Vainio, Lari

    2009-07-01

    The author investigated how the motor program elicited by an object's orientation is updated by object-based information while a participant reaches for the object. Participants selected the hand of response according to the thickness of the graspable object and then reached toward the location in which the object appeared. Reach initiation times decreased when the handle of the object was oriented toward the responding hand. This positive compatibility effect turned into a negative compatibility effect (NCE) during reach execution when the object was removed from the display 300 ms after object onset or replaced with a mask at movement onset. The results demonstrate that interrupted object-based updating of an ongoing reach movement triggers the NCE.

  19. Comprehensive restriction enzyme lists to update any DNA sequence computer program.

    PubMed

    Raschke, E

    1993-04-01

    Restriction enzyme lists are presented for the practical working geneticist to update any DNA computer program. These lists combine formerly scattered information and contain all presently known restriction enzymes with a unique recognition sequence, a cut site, or methylation (in)sensitivity. The lists are in the shortest possible form to also be functional with small DNA computer programs, and will produce clear restriction maps without any redundancy or loss of information. The lists discern between commercial and noncommercial enzymes, and prototype enzymes and different isoschizomers are cross-referenced. Differences in general methylation sensitivities and (in)sensitivities against Dam and Dcm methylases of Escherichia coli are indicated. Commercial methylases and intron-encoded endonucleases are included. An address list is presented to contact commercial suppliers. The lists are constantly updated and available in electronic form as pure US ASCII files, and in formats for the DNA computer programs DNA-Strider for Apple Macintosh, and DNAsis for IBM personal computers or compatibles via e-mail from the internet address: NETSERV@EMBL-HEIDELBERG.DE by sending only the message HELP RELIBRARY.

  20. National Center for Manufacturing Sciences: Environmentally conscious manufacturing

    NASA Technical Reports Server (NTRS)

    Vinton, Clare

    1995-01-01

    The purpose of this presentation is to share the results and some of the thinking of the Environmentally Conscious Manufacturing - Strategic Initiative Group (ECM-SIG) at the National Center for Manufacturing Sciences (NCMS). NCMS is a consortium of more than 185 North American Manufacturing organizations comprised of about 75 percent for profit manufacturing companies and about 25 percent nonprofit organizations that support manufacturing activities. NCMS conducts collaborative R&D programs designed to improve global competitiveness of its members and other North American manufacturers to address common issues that are important to manufacturing industries. NCMS is an industry driven organization whose agenda is established by industry with input from appropriate government agencies.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top