NASA Astrophysics Data System (ADS)
Eldrett, James S.; Ma, Chao; Bergman, Steven C.; Ozkan, Aysen; Minisini, Daniel; Lutz, Brendan; Jackett, Sarah-Jane; Macaulay, Calum; Kelly, Amy E.
2015-08-01
We present an integrated multidisciplinary study of limestone-marlstone couplets from a continuously cored section including parts of the upper Buda Limestone, the entire Eagle Ford Group (Boquillas Formation) and lower Austin Chalk from the Shell Iona-1 research borehole (Texas, USA), which provides a >8 million year (myr) distal, clastic sediment-starved, intrashelf basin record of the early Cenomanian to the earliest Coniacian Stages. Results show that despite variable yet minimal diagenetic overprints, several unambiguous primary environmental signals are preserved and support greater water-mass ventilation and current activity promoting increased silica/carbonate productivity during the deposition of limestone beds compared to deposition of marlstone beds which reflect greater organic matter productivity and preservation. Furthermore, our astronomical analyses demonstrate that the limestone-marlstone couplets in the Iona-1 core reflect climatic forcing driven by solar insolation resulting from integrated Milankovitch periodicities. In particular, we propose that obliquity and precession forcing on the latitudinal distribution of solar insolation may have been responsible for the observed lithological and environmental variations through the Cenomanian, Turonian and Coniacian in this mid-latitude epicontinental sea setting. Our data also suggests that rhythmic lithological alternations deposited in Greenhouse periods, in general, may simply reflect climate-driven cycles related to Earth-Sun dynamics without the need to invoke significant sea-level variations.
Lewan, Michael; Sonnenfeld, Mark D.
2017-01-01
Low-temperature hydrous pyrolysis (LTHP) at 300°C (572°F) for 24 h released retained oils from 12- to 20-meshsize samples of mature Niobrara marly chalk and marlstone cores. The released oil accumulated on the water surface of the reactor, and is compositionally similar to oil produced from the same well. The quantities of oil released from the marly chalk and marlstone by LTHP are respectively 3.4 and 1.6 times greater than those determined by tight rock analyses (TRA) on aliquots of the same samples. Gas chromatograms indicated this difference is a result of TRA oils losing more volatiles and volatilizing less heavy hydrocarbons during collection than LTHP oils. Characterization of the rocks before and after LTPH by programmable open-system pyrolysis (HAWK) indicate that under LTHP conditions no significant oil is generated and only preexisting retained oil is released. Although LTHP appears to provide better predictions of quantity and quality of retained oil in a mature source rock, it is not expected to replace the more time and sample-size efficacy of TRA. However, LTHP can be applied to composited samples from key intervals or lithologies originally recognized by TRA. Additional studies on duration, temperature, and sample size used in LTHP may further optimize its utility.
Ichnofabrics and Facies in the Paleocene of Chicxulub: A Record of the Recovery of Life Post-Impact
NASA Astrophysics Data System (ADS)
Whalen, M. T.; O'Malley, K.; Lowery, C. M.; Rodriguez-Tovar, F. J.; Gulick, S. P. S.; Morgan, J. V.
2017-12-01
IODP/ICDP Expedition 364 recovered 829 m of core at Site M0077 including 110 m of post-impact, (hemi)pelagic Paleogene sedimentary rocks overlying the Chicxulub impact crater peak ring formed from suevite, melt rock, and granitic basement. The transition between suevite and Paleocene limestone (Unit 1F) is a remarkable fining upward package of gravel to sand-sized suevite (Unit 2A) overlain by the laminated carbonate-rich Unit 1G that records deposition of fine-grained material post-impact and contains a mix of Late Cretaceous and earliest Danian taxa. This study concentrates on the overlying Unit 1F. The ichnofabric index (ii, 1-6 indicating no bioturbation to complete homogenization), provides a semiquantitative estimate of burrow density to help assess the return of life to the crater. Unit 1F is 10 m thick with a sharp contact at the base of a green claystone (ii 2) that overlies Unit 1G. It consists of cm-dm interbedded blue-gray marlstone (ii 2) grading upward into gray to blue-gray wacke/packstone (ii 3-5). Contacts between facies are mostly gradational due to burrowing. The upper 3 m of the unit is a yellow-brown burrowed packstone (ii 4) intercalated with gray marlstone (ii 2). The uppermost 7.5 cm is calcite cemented with 1 cm wide burrows (ii 3-4) and fine to coarse sand size clasts including foraminifera. The upper surface of the unit is a hardground with an 2 Myr unconformity overlain by Eocene rocks. The first well-defined burrows occur in the upper 30 cm of Unit 1G. Unequivocal burrows (ii 2) that disturb sedimentary facies occur in overlying Unit 1F with values of 3-5 recorded in the overlying 10 cm indicating significant disruption of primary sedimentary structures. The iis in Unit 1F vary between 2 and 5 with rare laminated intervals without bioturbation (ii 1). Values of ii correlate well with facies changes, i.e. marlstones display lower iis than more carbonate-rich facies, implying a depth and/or redox control on burrower distribution. The ii data indicate that burrowers were re-established in the crater before the end of deposition of Unit 1G. The lowest Danian zone Pα is documented in the lowermost part of Unit 1F. Trace makers were thus active by the earliest Danian with an increase in abundance and diversity during the lower Danian, indicating a rapid and continuous return of benthic life to the crater.
NASA Astrophysics Data System (ADS)
Shan, Chunling; Kalscheuer, Thomas; Pedersen, Laust B.; Erlström, Mikael; Persson, Lena
2017-08-01
Field setup of an audio magnetotelluric (AMT) station is a very time consuming and heavy work load. In contrast, radio magnetotelluric (RMT) equipment is more portable and faster to deploy but has shallower investigation depth owing to its higher signal frequencies. To increase the efficiency in the acquisition of AMT data from 10 to 300 Hz, we introduce a modification of the AMT method, called portable audio magnetotellurics (PAMT), that uses a lighter AMT field system and (owing to the disregard of signals at frequencies of less than 10 Hz) shortened data acquisition time. PAMT uses three magnetometers pre-mounted on a rigid frame to measure magnetic fields and steel electrodes to measure electric fields. Field tests proved that the system is stable enough to measure AMT fields in the given frequency range. A PAMT test measurement was carried out on Gotland, Sweden along a 3.5 km profile to study the ground conductivity and to map shallow Silurian marlstone and limestone formations, deeper Silurian, Ordovician and Cambrian sedimentary structures and crystalline basement. RMT data collected along a coincident profile and regional airborne very low frequency (VLF) data support the interpretation of our PAMT data. While only the RMT and VLF data constrain a shallow ( 20-50 m deep) transition between Silurian conductive (< 30 Ωm resistivity) marlstone and resistive (> 1000 Ωm resistivity) limestone, the single-method inversion models of both the PAMT and the RMT data show a transition into a conductive layer of 3 to 30 Ωm resistivity at 80 m depth suggesting the compatibility of the two data sets. This conductive layer is interpreted as saltwater saturated succession of Silurian, Ordovician and Cambrian sedimentary units. Towards the lower boundary of this succession (at 600 m depth according to boreholes), only the PAMT data constrain the structure. As supported by modelling tests and sensitivity analysis, the PAMT data only contain a vague indication of the underlying crystalline basement. A PAMT and RMT joint inversion model reveals all the aforementioned units including the less than 80 m deep limestone and marlstone formations and the conductive sedimentary succession of Silurian, Ordovician and Cambrian units. Our test measurements have proven the PAMT modification to be time saving and easy to set up. However, PAMT data suffer from the same noise disturbances as regular AMT data. Since man-made EM noise can propagate over great distances through resistive underground, PAMT measurements are recommended to be carried out in areas with low resistivity. The PAMT method is proven to be applicable in shallow depth studies, especially in areas where normal AMT measurements are inconvenient and/or too expensive to carry out.
NASA Astrophysics Data System (ADS)
Tan, Xiaodong
2016-04-01
In the northern Tethys Himalaya, sporadically distributed Cretaceous oceanic red beds (CORBs, the Chuangde Formation) have been described. The sequence was interpreted to be firstly deposited in the outer continental shelf and upper slope, and later slumped into deep basin. Based on this model, and paleomagnetic data of shallow water deposits from the southern Tethys Himalaya, the CORBs were derived from the northern tip of the passive margin of the greater India. If so, the CORBs would provide more accurate record of the northern extent of the greater India, which is an important parameter for estimating the initial time of India-Asia continental collision and the amount of crustal shortening. The well studied and most accessible section is located in the Chuangde village, about 40km east from the Gyangze city. The formation is about 25m thick, ranging from 84 to 75Ma in age according to fossil records of planktonic foraminiferal species. The lower and upper parts are 2 and 5 meter thick marlstones, respectively, and the middle section is dominated by shale with a few layers of centimeter scale marlstones. Fifty cores were collected from the marlstones of the section, and for the purpose of fold test, 30 more cores were collected from the upper part of the formation from a second section located in the Pulong village, ~3km to the northeast of the Chuangde village. All samples were subject to stepwise thermal demagnetization. About 60% of the samples yielded interpretable demagnetization results. The bottom of the upper part of the formation show reversed high temperature component, and the rest of the upper part and the lower part show normal polarity. The Chuangde section data failed reversal test, because the normal polarity direction is likely not fully resolved from overprint component. However, the well resolved reversal direction from the Chuangde village and the normal direction from Pulong pass both reversal and fold tests. The mean paleomagnetic data indicate a paleolatitude of 10±2 degree north, ~2000 km distance from the southern Tethys Himalaya. Therefore, the formation is not deposited near the greater Indian continental margins. Based on recent plate tectonic reconstruction, the CORBs are very likely formed within a back-arc basin between the equatorial intra-oceanic subduction system and the Asian continental margin. Due to coeval development of abundant red beds in the Lhasa block, the characteristic pigments of hematite born in the CORBs are likely of terrestrial origin. In addition, the new data indicate that the Lhasa block is unlikely to be at low paleolatitude in the Late Cretaceous and Tertiary as some of the paleomagnetic results show.
Sedimentology of Upper Cretaceous Coffee sands in north-central Mississippi
DOE Office of Scientific and Technical Information (OSTI.GOV)
Webb, E.J.
1984-09-01
The Upper Cretaceous Coffee Group within the Desha basin of Mississippi is composed of two major lithologies, a light to dark marlstone and a series of white, fine to medium-grained siltstones and sandstones. The two source areas for the sands are the Sharkey platform to the south and the southern Appalachians. The presence of hydrocarbons has been described at the outcrop and in subsurface cuttings and cores. Depositional environments in the shallow shelf consist of lagoons, barrier island bars, offshore bars, and surge channel deposits. Southwest regional dip of approximately 40 ft/mi (8 m/km) is reflected on all Upper Cretaceousmore » horizons.« less
Stamatakis, M.G.; Hein, J.R.; Magganas, A.C.
1989-01-01
A Late Miocene non-marine stratigraphic sequence composed of limestone, opal-CT-bearing limestone, porcelanite, marlstone, diatomaceous marlstone, dolomite, and tuffite crops out on eastern Samos Island. This lacustrine sequence is subdivided into the Hora Beds and the underlying Pythagorion Formation. The Hora Beds is overlain by the clastic Mytilinii series which contains Turolian (Late Miocene) mammalian fossils. The lacustrine sequence contains volcanic glass and the silica polymorphs opal-A, opal-CT, and quartz. Volcanic glass predominantly occurs in tuffaceous rocks from the lower and upper parts of the lacustrine sequence. Opal-A (diatom frustules) is confined to layers in the upper part of the Hora Beds. Beds rich in opal-CT underlie those containing opal-A. The occurrence of opal-CT is extensive, encompassing the lower Hora Beds and the sedimentary rocks and tuffs of the Pythagorion Formation. A transition zone between the opal-A and opal-CT zones is identified by X-ray diffraction patterns that are intermediate between those of opal-CT and opal-A, perhaps due to a mixture of the two polymorphs. Diagenesis was not advanced enough for opal-CT to transform to quartz or for volcanic glass to transform to opal-C. Based on geochemical and mineralogical data, we suggest that the rate of diagenetic transformation of opal-A to opal-CT was mainly controlled by the chemistry of pore fluids. Pore fluids were characterized by high salinity, moderately high alkalinity, and high magnesium ion activity. These pore fluid characteristics are indicated by the presence of evaporitic salts (halite, sylvite, niter), high boron content in biogenic silica, and by dolomite in both the opal-A and opal-CT-bearing beds. The absence of authigenic K-feldspar, borosilicates, and zeolites also support these pore fluid characteristics. Additional factors that influenced the rate of silica diagenesis were host rock lithology and the relatively high heat flow in the Aegean region from Miocene to Holocene. ?? 1989.
Lacustrine deposits in rifted deep basins of Yellow Sea
DOE Office of Scientific and Technical Information (OSTI.GOV)
Han, J.H.
1985-02-01
The central Yellow Sea is a typical intracratonic rifted basin that consists of 4 major depressions bounded by aligned listric faults along horst blocks of uplifted basement (Kunsan, West Kunsan, Yellow Sea sub-basins, and Central Trough). The depressions are half grabens caused by pull-apart extensional stresses. Core analysis and micropaleotologic study indicate that more than 5 km of lacustrine sediments were accumulated in the central part of the West Kunsan basin. Two distinctive sedimentary successions are recognized in the core descriptions: alternation of reddish-brown siltstones and sandstones containing evaporites and marlstones, and an overlying progradational sequence including minor limestone bedsmore » in the lower part of the sequence. The progradational sequence is interpreted as lacustrine deltaic deposits. Abundant palynofloral occurrence of freshwater green algae, Pediastrum, and absence of marine fauna such as dinoflagellates are also supporting evidence for a lacustrine environment. The lithofacies and tectonic framework of the Yellow Sea are very similar to those of Cretaceous lacustrine sediments of the Korea Peninsula onshore and Pohai coastal basin in China.« less
Dale, R.H.; Weeks, John B.
1978-01-01
The U.S. Bureau of Mines plans to develop an underground oil-shale research facility near the center of Piceance Creek basin in Colorado. The oil-shale zone, which is to be penetrated by a shaft, is overlain by 1,400 feet of sedimentary rocks, primarily sandstone and marlstone, consisting of two aquifers separated by a confining layer. Three test holes were drilled by the U.S. Bureau of Mines to obtain samples of the oil shale, and to test the hydraulic properties of the two aquifers. The data collected during construction of the test holes were used to update an existing ground-water-flow computer model. The model was used to estimate the maximum amount of water that would have to be pumped to dewater the shaft during its construction. It is estimated that it would be necessary to pump as much as 3,080 gallons per minute to keep the shaft dry. Disposal of waste water and rock are the principal hydrologic problems associated with constructing the shaft. (Woodard-USGS)
NASA Astrophysics Data System (ADS)
Broennimann, Cornelia; Tacher, Laurent; Jaboyedoff, Michel; Jongmans, Denis; Springman, Sarah; Askarinejad, Amin
2010-05-01
It is well known that the most important triggering mechanism for rapid landslides is the infiltration of precipitation water at the surface of slopes which decreases the soils shear strength. However, the present study put focus on the exfiltration of groundwater from the substratum and its effect on the triggering of overlying landslides. Which is the origin of this groundwater? Which role does the hydrogeology play on the triggering mechanism of landslides? Is the bedrock locally feeding (springs) or draining (fractures) the overlying soil material in slopes? Due to the invisibility of the underground, these questions are difficult to answer. The aims of this research are 1) combining suitable field methods in order to create geological and hydrogeological conceptual models for different landslides located in representative geological settings in Switzerland, 2) to compare the different models and 3) to complement them with numerical flow modelling. For this purpose, three different case studies were chosen: • Landslide triggerd by artificial rainfall on a natural slope: This experiment was carried out in the Northern Swiss Molasse Basin where horizontally layered porous and fractured sandstone intersects with marlstone and is overlied by silty colluvium and sandy eluvium. The role of the joints and the groundwater in the porous sandstone is studied. • Reactivated fast moving landslide: This landslide affects moraine material and weathered bedrock which overlies black schist, flysch and rauhwacke in a tectonically affected zone in the Western Swiss Prealps. The origin of the groundwater in the landslide area and the influence of a spring at the base of the landslide are of special interest. • Slope prone to landslides: This slope is located in the Swiss Subalpine Molasse where inclined and heavily fractured conglomerate is interbedded with sandstone and marlstone and covered with silty and clayey eluvium. The destabilizing effect of springs on the slope, their origin from the fractured conglomerate and their response to rainfall is investigated. In a first project step, the geology and geometry of the landslides are investigated by the combination of geophysical methods (active seismic and electric resistivity), LIDAR, borehole drilling and geological mapping. In a second step, the hydrological/hydrogeological regime is investigated by measuring the hydraulic conductivity with the use of infiltration tests, measuring of precipitation and spring flux, monitoring the groundwater level in boreholes and analyzing hydrogeochemical parameters. Based on these investigations, hydrogeological conceptual models are created. In a next step, different water flow scenarios will be simulated using finite element hydrological flow models. The first results give evidence that for the understanding of the triggering mechanism of the different landslide types it is important to take into account the groundwater regime of the substratum: either it acts as a drain or it is feeding the overlying unstable mass and therefore either disadvantages the triggering or brings it forward. In a further step, the described conceptual models will be compared and verified with related landslides in similar geological settings.
Sedimentology and tectonics of the collision complex in the east arm of Sulawesi Indonesia
NASA Astrophysics Data System (ADS)
Simandjuntak, Tohap Oculair
An imbricated Mesozoic to Palaeogene continental margin sequence is juxtaposed with ophiolitic rocks in the East Arm of Sulawesi, Indonesia. The two tectonic terranes are bounded by the Batui Thrust and Balantak Fault System, which are considered to be the surface expression of the collision zone between the Banggai-Sula Platform and the Eastern Sulawesi Ophiolite Belt. The collision complex contains three distinctive sedimentary sequences : 1) Triassic-Palaeogene continental margin sediments, ii) Cretaceous pelagic sediments and iii) Neogene coarse clastic sediments and volcanogenic turbidites. (i) Late Triassic Lemo Beds consisting largely of carbonate-slope deposits and subsidiary clastics including quartz-rich lithic sandstones and lensoidal pebbly mudstone and conglomeratic breccia. The hemipelagic limestones are rich in micro-fossils. Some beds of the limestone contain bivalves and ammonites, including Misolia, which typifies the Triassic-Jurassic sequence of eastern Indonesia. The Jurassic Kapali Beds are dominated by quartzose arenites containing significant amounts of plant remains and lumps of coal. The Late Jurassic sediments consist of neritic carbonate deposits (Nambo Beds and Sinsidik Beds) containing ammonites and belemnites, including Belemnopsis uhligi Stevens, of Late Jurassic age. The Jurassic sediments are overlain unconformably by Late Cretaceous Luok Beds which are predominantly calcilutite with chert nodules rich in microfossils. The Luok Beds are unconformably overlain by the Palaeogene Salodik Limestones which consist of carbonate platform sediments rich in both benthic and planktonic foraminifera of Eocene to Early Miocene age. These sediments were deposited on the continental margin of the Banggai-Sula Platform. (ii) Deep-sea sediments (Boba Beds) consist largely of chert and subsidiary calcilutite rich in radiolaria of Cretaceous age. These rocks are part of an ophiolite suite. (iii) Coarse clastic sediments (Kolo Beds and Biak Conglomerates) are typical post-orogenic clastic rocks deposited on top of the collision complex. They are composed of material derived from both the continental margin sequence and ophiolite suite. Volcanogenic Lonsuit Turbidites occur in the northern part of the East Arm in Poh Head and unconformably overlie the ophiolite suite. Late Miocene to Pliocene planktonic foraminifera occur in the intercalated marlstone and marly sandstone beds within these rocks. The collision zone is marked by the occurrence of Kolokolo Melange, which contain exotic fragments detached from both the ophiolite suite and the continental margin sequence and a matrix of calcareous mudstone and marlstone rich in planktonic foraminifera of late Middle Miocene to Pliocene age. The melange is believed to have been formed during and after the collision of the Banggai-Sula Platform with the Eastern Sulawesi Ophiolite Belt. Hence, the collision event took place in Middle Miocene time. The occurrence of at least three terraces of Quaternary coraline reefs on the south coast of the East Arm of Sulawesi testifies to the rapid uplift of the region. Seismic data suggest that the collision might still be in progress at the present time.
Lithium in rocks from the Lincoln, Helena, and Townsend areas, Montana
Brenner-Tourtelot, Elizabeth F.; Meier, Allen L.; Curtis, Craig A.
1978-01-01
In anticipation of increased demand for lithium for energy-related uses, the U.S. Geological Survey has been appraising the lithium resources of the United States and investigating occurrences of lithium. Analyses of samples of chiefly lacustrine rocks of Oligocene age collected by M. R. Mudge near Lincoln, Mont. showed as much as 1,500 ppm lithium. Since then we have sampled the area in greater detail, and have sampled rocks of similar ages in the Helena and Townsend valleys. The lithium-rich beds crop out in a band about 1.3 km long by 0.3 km wide near the head of Beaver Creek, about 14 km northwest of Lincoln, Mont. These beds consist of laminated marlstone, oil shale, carbonaceous shale, limestone, conglomerate, and tuff. Some parts of this sequence average almost 0.1 percent lithium. The lithium-bearing rocks are too low in grade and volume to be economic. Samples of sedimentary rocks of Oligocene age from the Helena and Townsend valleys in the vicinity of Helena, Mont. were generally low in lithium (3-40 ppm). However, samples of rhyolites from the western side of the Helena valley and from the Lava Mountain area were slightly above average in lithium content (6-200 ppm).
Aiello, I.W.; Hagstrum, J.T.
2001-01-01
Oriented samples of Jurassic radiolarian chert were collected from the Tuscan domain (continental margin) and the Ligurid domain (oceanic) of the northern Apennines for paleomagnetic study to determine the paleogeographic origins of these rocks. The oceanic rocks are all thermochemically overprinted by a mostly reversed-polarity component of magnetization (B) that was likely acquired during late Miocene regional uplift of the northern Apennines. This component also dominates the lower brittle chert of the Tuscan Cherts, but disappears upsection in the more clay-rich and ductile siliceous marlstones. In addition, the Tuscan Cherts retain an inferred primary magnetization (C), isolated at temperatures between 560 and 660 degrees C, which passes a fold test and shows a polarity stratigraphy. This component indicates a paleolatitude of 11 degrees + or -4 degrees N, and a counterclockwise vertical-axis rotation of 29 degrees + or -9 degrees with respect to the southern Alps of Italy, of 49 degrees + or -8 degrees with respect to Africa, and of 91 degrees + or -8 degrees with respect to Eurasia. Our results suggest that the Tuscan domain was farther south than other deep-water continental margin sections of Adria, and that transcurrent faulting might have played a significant role in the orogenic evolution of the northern Apennines.
Monokrousos, Nikolaos; Boutsis, George; Diamantopoulos, John D
2014-12-01
The aim of this study was to assess the seasonal development of the physicochemical (pH, organic C, organic N, extractable P, Ca(2+), Mg(2+)) and biological soil properties (microbial biomass, activities of urease, dehydrogenase and alkaline phosphatase) of the topsoil of mine deposition sites that differed based on the material used exclusively for their creation: (a) marlstones, (b) red-grey formations (RGF), and (c) fly ash (FA), during the first year after their creation. Our hypothesis was that all deposition sites, regardless the material they consist of, present equal opportunities for the establishment of spontaneous vegetation. All macronutrients concentrations (P, Ca(2+), and Mg(2+)) remained constant with time and were found to be higher in the FA sites. Organic C, organic N, all enzyme activities, and microbial biomass were higher in the RGF and marl depositions, with marl sites presenting the highest values. All values of biological variables, with the exception of alkaline phosphatase, increased with time. The alkaline environment along with the slow improvement in soil biological properties of the FA sites seemed to present the most unfavorable conditions for spontaneous vegetation growth. On the contrary, the other two spoil materials presented significant improvement in the initial stages of soil formation in terms of soil functionality.
NASA Astrophysics Data System (ADS)
Javier Álvaro, J.; Colmenar, Jorge; Monceret, Eric; Pouclet, André; Vizcaïno, Daniel
2016-06-01
Upper Ordovician-Lower Devonian rocks of the Cabrières klippes (southern Montagne Noire) and the Mouthoumet massif in southern France rest paraconformably or with angular discordance on Cambrian-Lower Ordovician strata. Neither Middle-Ordovician volcanism nor associated metamorphism is recorded, and the subsequent Middle-Ordovician stratigraphic gap is related to the Sardic phase. Upper Ordovician sedimentation started in the rifting branches of Cabrières and Mouthoumet with deposition of basaltic lava flows and lahar deposits (Roque de Bandies and Villerouge formations) of continental tholeiite signature (CT), indicative of continental fracturing. The infill of both rifting branches followed with the onset of (1) Katian (Ka1-Ka2) conglomerates and sandstones (Glauzy and Gascagne formations), which have yielded a new brachiopod assemblage representative of the Svobodaina havliceki Community; (2) Katian (Ka2-Ka4) limestones, marlstones, and shales with carbonate nodules, reflecting development of bryozoan-echinoderm meadows with elements of the Nicolella Community (Gabian and Montjoi formations); and (3) the Hirnantian Marmairane Formation in the Mouthoumet massif that has yielded a rich and diverse fossil association representative of the pandemic Hirnantia Fauna. The sealing of the subaerial palaeorelief generated during the Sardic phase is related to Silurian and Early Devonian transgressions leading to onlapping patterns and the record of high-angle discordances.
NASA Astrophysics Data System (ADS)
Dehbozorgi, Mehdi; Sabouhi, Mostafa; Nabavi, Hamid
2010-05-01
The out crapes of Mishan Formation located in Aghar area(Firuzabad city) south west of Fars and 70km south west of Firuzabad. this Formation mostly consist of limestone, marly limestone and marlstone with 800m thickness. 6key beds distinctive from limestone beds are recognized in this area. this key beds are useful for local and regional correlation in Zagros mountains. the key beds from base to top are: Red algae, Bryozoa, Gastropoda and Plecypoda, Crabs and Oysters. Mishan Formation in this area is between Gachsaran F.M(Under Formation), Conformable and Aghajari F.M(Upper Formation), Conformable. With due attention to rang and distribution of the Macrofossils, 5 local assmblage biozone were recognized, that is confirming time limit from Early- Upper Miocene. this research cheked and controled a biostrom Plecypoda(Oysters) level by thickness 3- 4m. this biostrom located around 550m the base of section. Ofcurse more of this Plecypoda be assinged to order pterriodia and Genus Oyster. Along with Oysters, Pecten and Venus can be see. This biostrom made up a bioclastic shoal shallow deep in the margin of sea Miocene. This Oysters report from Mishan Formation of Firuzabad, Fars, Zagros, Iran: Ostrea virleti var. crassicostat, Ostrea virleti Desh var. persica, Ostrea digitatai Echiwald var. rohlfsi, Ostrea lamellose. Ostrea cf. biowwondeli. Master of science in Geology (Paleontology), University of Isfahan, Iran.
NASA Astrophysics Data System (ADS)
Fendek, Marián; Grand, Tomáš; Daniel, Slavomír; Blanárová, Veronika; Kultan, Vincent; Bielik, Miroslav
2017-08-01
The geology and hydrogeology of the Liptovská Kotlina Depression were studied by means of new geophysical methods. Controlled source audio-frequency magnetotellurics enabled us to delineate the relief of the pre-Cainozoic basement in the western part of the Liptovská Kotlina Depression into two segments with different lithostratigraphic units. Our complex findings disprove the interconnection between the Bešeňová and Lúčky water bearing structures located in the study area. The results were interpreted in the form of a resistivity cross section and resistivity model. The geological interpretation of the obtained results, taking into account the other geophysical and geological constrains showed that the pre-Cainozoic basement has a tectonically disrupted, broken relief. The Bešeňová and Lúčky structures appear to be isolated by the Palaeogene sediments (sandstone, claystone) and in the deeper part also by marly carbonates and marlstones of the Jurassic age belonging to the Fatricum. It was confirmed that the structural connectivity of geothermal aquifers in the area between the Bešeňová and Lúčky-Kaľameny should not exist. The assumption of different circulation depth was also confirmed by geothermometry and existing radiocarbon analyses applied on groundwater in both areas.
Sageman, B.B.; Rich, J.; Arthur, M.A.; Birchfield, G.E.; Dean, W.E.
1997-01-01
The limestone/marlstone bedding couplets of the Bridge Creek Limestone Member, Cenomanian-Turonian Greenhorn Formation, were analyzed by applying spectral techniques to high-resolution lithologic and geochemical data from a core. The results suggest that the Bridge Creek contains a complex record of orbital cyclicity. The dominant signal appears to be obliquity, but signals corresponding to precession and eccentricity were also observed. The development of the bedding couplets is interpreted to have resulted from a combination of factors, including insolation-controlled changes in higher-latitude precipitation leading to dilution/redox cycles, and in lower-latitude evaporation, leading to changes in surface water conditions and productivity cycles in the calcareous plankton. The data interpreted to reflect redox cycles appear to be more strongly influenced by obliquity, and show a weak precessional signal. In contrast, trends in the carbonate record show the opposite response. The complex bedding pattern observed in the Bridge Creek Limestone is interpreted to result from the competing influences of different orbital cycles expressed through different pathways of the depositional system, and was also affected by changes in sedimentation rates related to relative sea level fluctuations, aperiodic dilution by volcanic ash, and changes in organic-matter production and redox conditions related to a global "oceanic anoxic event". These factors complicate cycle analysis in the lower part of the member but leave a relatively undisturbed record in the upper Bridge Creek Limestone. Copyright ?? 1997, SEPM (Society for Sedimentary Geology).
NASA Astrophysics Data System (ADS)
Schröder-Adams, Claudia J.; Herrle, Jens O.; Tu, Qiang
2012-12-01
The forebulge region of the Cretaceous Canadian Western Interior Sea (CWIS) was susceptible to subaerial exposure and marine erosion during sea level lowstands. The middle Albian to Santonian record as cored at Cold Lake, east-central Alberta, Canada documents numerous disconformities that are expressed in bioclastic concentration horizons and faunal extinctions and turnovers. Detailed comparison between a newly established δ13Corg. record measured on bulk sediment at Cold Lake and a combined δ13Ccarb. reference curve based on the Cretaceous English chalk and SE France hemipelagic marlstones highlights missing positive and negative δ13C excursions at the CWIS forebulge and thus missing sections that precisely corroborate with sequence boundaries. Disconformable boundaries correlate closely with global sea-level lowstands as established for the Cretaceous North Atlantic suggesting a pronounced eustatic influence on the CWIS forebulge setting. Sequence boundaries occur in the uppermost Middle Albian, lowermost Upper Albian, Albian/Cenomanian boundary, Cenomanian/Turonian boundary, middle Turonian to lower Coniacian and uppermost Middle Santonian, each followed by a positive δ13C excursion. Oceanic anoxic events 1d, 2 and 3 are recognized and linked to major faunal and floral assemblage changes. Of these the Albian/Cenomanian biotic turnover is the most severe in the CWIS marked by the total loss of Albian benthic foraminifera species. Causes of this benthic extinction might be linked to a period of anoxia (OAE 1d) during the latest Albian followed by sea-level controlled basin restriction.
DOE Office of Scientific and Technical Information (OSTI.GOV)
McBride, E.F.; Picard, M.D.
Trichichnus, a thread-like burrow possibly the work of sipunculan worms, is widespread in Bouma E (turbidite claystone) and H (hemipelagic claystone) layers and some thin turbidite sandstone beds in basin-plain and outer fan-lobe deposits of the Marnoso-arenacea Formation. Trichichnus closely resembles that described elsewhere in chalk and marlstone, although the burrows are smaller (mean diameter=0.13 mm) and burrow curvature is tighter. Trichichnus fills are darker than the host claystone because of high organic content and disseminated pyrite. Any distinctive internal structure of the burrow wall or fill was destroyed by pyrite growth. Trichichnus is most abundant in Bouma E layers,more » where burrow spacing ranges from 0.4 to 50 cm and burrows extend to depths of 160 cm. The Trichichnus maker commonly burrowed vertically down through E and D layers (clay and silt) and then horizontally on top of C layers (sand). The burrows also vertically penetrate Bouma C sandstone layers up to 6 cm thick, but they are rare in beds thicker than 3 cm. They are less abundant or not well displayed in H layers where Chondrites predominates. Trichichnus overprints Chondrites. Following deposition of the Contessa megaturbidite, which exceeds 9 m in thickness, the sediment surface was repopulated chiefly by Trichichnus and Chondrites producers. Trichichnus extends 160 cm below the top of the Contessa, whereas Chondrites extend only to 64 cm. This suggests a greater tolerance of Trichichnus makers to low in situ oxygen levels. The near absence of laminations in the E division of the Contessa megabed may be the result of Trichichnus burrows that were not pyritized and which lack textural identity.« less
Sedimentation of deep-water turbidites in the SW part of the Pannonian Basin
NASA Astrophysics Data System (ADS)
Vrbanac, Boris; Velić, Josipa; Malvić, Tomislav
2010-02-01
The Sava Depression and the Bjelovar Subdepression belong to the SW margin of the Pannonian Basin System, which was part of the Central Paratethys during the Pannonian period. Upper Pannonian deposits of the Ivanic-Grad Formation in the Sava Depression include several lithostratigraphic members such as Iva and Okoli Sandstone Member or their lateral equivalents, the Zagreb Member and Lipovac Marlstone Member. Their total thickness in the deepest part of the Sava Depression reaches up to 800 meters, while it is 100-200 meters in the margins of the depression. Deposits in the depression are composed of 4 facies. In the period of turbiditic activities these facies are primarily sedimented as different sandstone bodies. In the Bjelovar Subdepression, two lithostratigraphic members (lateral equivalent) were analysed, the Zagreb Member and Okoli Sandstone Member. The thickness of the Bjelovar Subdepression ranges from 50 meters along the S and SE margins to more than 350 meters along the E margin. Generally, detritus in the north-west part of the analysed area originated from a single source, the Eastern Alps, as demonstrated by sedimentological and physical properties, the geometry of the sandstone body and the fossil content. This clastic material was found to be dispersed throughout the elongated and relatively narrow Sava Depression and in the smaller Bjelovar Subdepression. Sedimentation primarily occurred in up to 200 meters water depth and was strongly influenced by the sub-aqueous paleorelief, which determined the direction of the flow of turbidity currents and sandstone body geometries. The main stream with medium- and fine-grained material was separated by two independent turbiditic flows from N-NW to the SE-E. Variability in the thickness of sandstone bodies is the result of differences in subsidence and cycles of progradation and retrogradation of turbidite fans.
The Cretaceous-Tertiary boundary biotic crisis in the Basque country
NASA Technical Reports Server (NTRS)
Lamolda, M. A.
1988-01-01
The Zumaya section has been selected as a classic locality for the study of the Cretaceous-Tertiary (K-T) boundary due to its richness in microfaune, macrofaune, and nannoflora. The sections present similar good conditions for the study of the K-T boundary. The sedimentary rocks of the Uppermost Maastrichtian from the Basque Country are purple or pink marls and marls-tones. Above it is found a clayed bed, 40 to 29 cm thick, grey or dark grey in its basal part, of Lowermost Danian age. Above there is alternation of micritic grey-pink limestones and thin clay beds of Dano-Montian age. The average sedimentation is 7 to 8 times higher during the Upper Maastrichtian than in the Dano-Montian. The macrofauna underwent a decrease since the Campanian and was not found in the last 11 m of the Zumaya section; it was associated with changes in paleoceanographic conditions and primary productivity of the oceans. The microfossil assemblages in the K-T transition allows the recognition of several phases of a complex crisis between two well established planktonic ecosystems. In the Mayaroensis Zone there is a stable ecosystem with 45 to 47 planktonic foraminifera species. The disappearance of A. mayaroensis starts a degradation of the ecosystem. The number of planktonic foraminiera species decreases between 20 and 45 percent. The next phase of the crisis was the result of main extinction events in the planktonic calcareous ecosystem. There are several cretaceous planktonic foraminifera species, probably reworked, whose numbers decrease upward. The next and last phase of the biotic crisis shows a diversification of the ecosystem; the number of planktonic foraminifera is 2 to 3 times higher than before and it is noted the first appearance of Tertiary nannoflora species, while Cretaceous species decrease and persisting species are still the main ones.
Sensitivity of the North Atlantic Basin to cyclic climatic forcing during the early Cretaceous
Dean, W.E.; Arthur, M.A.
1999-01-01
Striking cyclic interbeds of laminated dark-olive to black marlstone and bioturbated white to light-gray limestone of Neocomian (Early Cretaceous) age have been recovered at Deep Sea Drilling Project (DSDP) and Ocean Drilling Project (ODP) sites in the North Atlantic. These Neocomian sequences are equivalent to the Maiolica Formation that outcrops in the Tethyan regions of the Mediterranean and to thick limestone sequences of the Vocontian Trough of France. This lithologic unit marks the widespread deposition of biogenic carbonate over much of the North Atlantic and Tethyan seafloor during a time of overall low sealevel and a deep carbonate compensation depth. The dark clay-rich interbeds typically are rich in organic carbon (OC) with up to 5.5% OC in sequences in the eastern North Atlantic. These eastern North Atlantic sequences off northwest Africa, contain more abundant and better preserved hydrogen-rich, algal organic matter (type II kerogen) relative to the western North Atlantic, probably in response to coastal upwelling induced by an eastern boundary current in the young North Atlantic Ocean. The more abundant algal organic matter in sequences in the eastern North Atlantic is also expressed in the isotopic composition of the carbon in that organic matter. In contrast, organic matter in Neocomian sequences in the western North Atlantic along the continental margin of North America has geochemical and optical characteristics of herbaceous, woody, hydrogen-poor, humic, type III kerogen. The inorganic geochemical characteristics of the dark clay-rich (80% CaCO3) interbeds in both the eastern and western basins of the North Atlantic suggest that they contain minor amounts of relatively unweathered eolian dust derived from northwest Africa during dry intervals.
Origin and microfossils of the oil shale of the Green River formation of Colorado and Utah
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bradley, W.H.
1931-01-01
The Green River formation of Colorado and Utah is a series of lakebeds of middle Eocene age that occupy two broad, shallow, simple, structural basins--the Piceance Creek basin in northwestern Colorado and the Uinta basin in northeastern Utah. The ancient lakes served as a basin for the accumulation of tremendous quantities of aquatic organisms. The predominance of microscopic fresh-water algae and protozoa over the remains of land plants, pollens and spores suggests that the greater part of the organic matter was derived from microorganisms that grew in the lakes. The pollens and spores were carried into the lakes by wind.more » Fish, mollusks, crustaceans, and aquatic insect larvae were also plentiful; and turtles, crocodiles, birds, small camels, and insects may have contributed to the organic matter. The ancient lakes apparently were shallow and had a large area, compared with depth. The abundance of organisms and the decaying organic matter produced a strongly reducing environment. Mechanical and chemical action, such as the mastication and digestion of the organic material by bottom-living organisms, caused disintegration of the original organic matter. When the residue was reduced to a gelatinous condition, it apparently resisted further bacterial decay, and other organisms accidently entombed in the gel were protected from disintegration. An accumulation of inorganic material occurred simultaneously with the disintegration of the organic ooze, and the entire mass became lithified. After most of the oil shale was deposited, the lake reverted nearly to the conditions that prevailed during its early stage, when the marlstone and low-grade oil shale of the basal member were formed. The streams in the vicinity of the lake were rejuvenated and carried great quantities of medium- to coarse-grained sand into the basin and formed a thick layer over the lakebeds.« less
NASA Astrophysics Data System (ADS)
Köster, Jürgen; Van Kaam-Peters, Heidy M. E.; Koopmans, Martin P.; De Leeuw, Jan W.; Sinninghe Damsté, Jaap S.
1997-06-01
Sulphurisation has been recognised as the most important diagenetic pathway acting on hopanoids in the organic-rich limestones, marlstone, and dolomite investigated. The qualitative and quantitative analysis of free and S-bound hopanoid moieties revealed that the incorporation of sulphur has a major impact on the carbon number distribution, the speciation and on the 22 S/(22S+22 R) ratio of the hopanoids. C 35 carbon skeletons are preferentially preserved by sulphur incorporation at the end of the side chain. Hopanoid sulphides, with the sulphur atom attached to one carbon atom of ring D or E and to one carbon atom of the side chain (condensed-type), are predominantly formed from precursors with a partially degraded side chain. In all samples the degree of sulphurisation of hopanoids increases with increasing carbon number. The carbon skeleton speciation changes with maturation in favour of hopanoid thiophenes, which are evidently the most stable hopanoid sulphur compounds, and hopanes. Hopanes are mainly formed via a sulphurisation/desulphurisation pathway and increase in concentration with maturity. Their original carbon number distribution is strongly shifted towards the lower homologues. With increasing maturity only a slight dominance of the C 35 members emerges. The most abundant series of condensed-type hopanoid sulphides have a 22R homohopane carbon skeleton that is not isomerised during maturation. The generation of hopanes from these condensed-type hopanoid sulphides during maturation leads to 22 S/(22S+22 R) ratios which increase with carbon number (e.g., from about 0.2 for C 31 to 0.5 for C 35 homologues). Data acquired from the sedimentary rock samples are supported by those obtained from artificial maturation experiments of a limestone by hydrous pyrolysis at different temperatures. The data show that generally accepted molecular maturation parameters have to be applied with caution.
cyclostratigraphy, sequence stratigraphy and organic matter accumulation mechanism
NASA Astrophysics Data System (ADS)
Cong, F.; Li, J.
2016-12-01
The first member of Maokou Formation of Sichuan basin is composed of well preserved carbonate ramp couplets of limestone and marlstone/shale. It acts as one of the potential shale gas source rock, and is suitable for time-series analysis. We conducted time-series analysis to identify high-frequency sequences, reconstruct high-resolution sedimentation rate, estimate detailed primary productivity for the first time in the study intervals and discuss organic matter accumulation mechanism of source rock under sequence stratigraphic framework.Using the theory of cyclostratigraphy and sequence stratigraphy, the high-frequency sequences of one outcrop profile and one drilling well are identified. Two third-order sequences and eight fourth-order sequences are distinguished on outcrop profile based on the cycle stacking patterns. For drilling well, sequence boundary and four system tracts is distinguished by "integrated prediction error filter analysis" (INPEFA) of Gamma-ray logging data, and eight fourth-order sequences is identified by 405ka long eccentricity curve in depth domain which is quantified and filtered by integrated analysis of MTM spectral analysis, evolutive harmonic analysis (EHA), evolutive average spectral misfit (eASM) and band-pass filtering. It suggests that high-frequency sequences correlate well with Milankovitch orbital signals recorded in sediments, and it is applicable to use cyclostratigraphy theory in dividing high-frequency(4-6 orders) sequence stratigraphy.High-resolution sedimentation rate is reconstructed through the study interval by tracking the highly statistically significant short eccentricity component (123ka) revealed by EHA. Based on sedimentation rate, measured TOC and density data, the burial flux, delivery flux and primary productivity of organic carbon was estimated. By integrating redox proxies, we can discuss the controls on organic matter accumulation by primary production and preservation under the high-resolution sequence stratigraphic framework. Results show that high average organic carbon contents in the study interval are mainly attributed to high primary production. The results also show a good correlation between high organic carbon accumulation and intervals of transgression.
NASA Astrophysics Data System (ADS)
Wanas, H. A.; Sallam, E.
2016-08-01
This study discusses the role of smectitic clays in the formation of an abiotic (physio-chemical) primary dolomite within an evaporative alkaline-saline marginal lake system, in the absence of carbonate precursor and microbes. The present work has been achieved in terms of textural, mineralogical, and geochemical characteristics of dolostones in the Mid-Eocene (Bartonian) lacustrine succession cropping out at Gebel El-Goza El-Hamra (Shabrawet area, NE Egypt). This lacustrine succession is 15-16 m thick, and made up of alternating horizontal beds of dolostone, marlstone and mudrock that show some pedogenic and subaerial exposure features. The dolostones are composed mainly of dolomite (60-90%), smectite (20-30%) and quartz grains (5-10%). The dolomite comprises fine-crystalline rhombs to micro-spherical crystals with no obvious relics of microbial activity and/or carbonate precursor. It is, ordered, nearly stoichiometric (with 46-50% mole of MgCO3) and has δ18O and δ13C values ranging from + 0.44 to + 2.96 VPDB ‰, and 0.93 to - 8.95 VPDB ‰, respectively. The smectite occurs as thin mats that are commonly intergrown and associated with dolomite. Mineralogical, textural and stable isotopic results of the dolomite indicated that the dolomite was formed as an abiotic primary precipitate in alkaline saline lacustrine systems. In this respect, the gel-like highly viscous smectitic medium plus progressive CO2 degassing, elevated evaporation, low sedimentation rate, low sulphates level and alkaline soil solution lowered the kinetic barriers of dolomite precipitation from solution and promoted the incorporation of Mg2 + in the structure of dolomite. Consequently, the presence of smectitic clays in evaporative saline lakes is significant for dolomite formation because they can generate a gel-like highly viscous medium and provide Mg2 + that can facilitate the physcio-chemical precipitation of primary dolomite from solution at ambient temperatures. However, more work is needed to better characterize the role of clays during dolomite formation in alkaline lacustrine environments at ambient temperatures.
Frank, T.D.; Arthur, M.A.; Dean, W.E.
1999-01-01
The stable isotope and minor element geochemistry of Neocomian (Lower Cretaceous) pelagic carbonates of the North Atlantic Basin (Deep Sea Drilling Project Sites 105, 367, 387, 391, and 603) was examined to develop a diagenetic model for pelagic limestones. In particular, we hoped to test the fidelity of whole-rock geochemical records as paleoceanographic indicators for pelagic deposits of pre-Aptian age, in which individual microfossils are not available for analysis. Data indicate that in addition to depth of burial, rhythmic variations in primary carbonate content have strongly controlled diagenetic patterns and associated geochemical signatures in these Neocomian sequences. Samples become increasingly depleted in Sr and 18O with increasing CaCO3 content. Within individual sedimentary sections, substantial decreases in Sr/Ca ratios and ??18O values are evident over a range of 4 to 98% CaCO3. However, even over a relatively narrow range of 50 to 98% CaCO3 a 2.5%c variation in ??18O values and a change of a factor of 1.7 in Sr/Ca ratios are observed. Carbon isotope compositions do not vary as extensively with CaCO3 content, but carbonate-rich intervals tend to be relatively depleted in 13C. Petrographic analysis reveals that these geochemical patterns are related to the transfer of CaCO3 from carbonate-poor intervals (calcareous shales and marlstones) to adjacent carbonate-rich intervals (limestones) during burial compaction and pressure solution. This process results in the addition of diagenetic cement to carbonate-rich intervals to produce a bulk composition that is relatively depleted in Sr and 18O and, at the same time, enables the retention of more-or-less primary carbonate that is relatively enriched in Sr and 18O in adjacent carbonate-poor intervals. Thus, although cyclic variations in CaCO3 content are primary in the Neocomian sequences examined, measured variations in Sr/Ca ratios and ??18O values are not and, as such, do not provide reliable proxies for past variations in climate, oceanographic conditions, or global ice volume.
NASA Astrophysics Data System (ADS)
Küsel, Kirsten; Totsche, Kai; Trumbore, Susan; Lehmann, Robert; Steinhäuser, Christine; Herrmann, Martina
2016-04-01
The Earth's Critical Zone (CZ) is a thin living layer connecting atmosphere and geosphere, including aquifers. Humans live in the CZ and benefit from the vital supporting services it provides. However, the CZ is increasingly impacted by human activities including land and resource use, pollution and climate change. Recent interest in uniting the many disciplines studying this complex domain has initiated an international network of research infrastructure platforms that allow access to the CZ in a range of geologic settings. In this paper a new such infrastructure platform associated with the Collaborative Research Center AquaDiva is described, that uniquely seeks to combine CZ research with detailed investigation of the functional biodiversity of the subsurface. Overall, AquaDiva aims to test hypotheses about how water connects surface conditions set by land cover and land management to the biota and biogeochemical functions in the subsurface. With long-term and continuous observations, hypotheses about how seasonal variations and extreme events at the surface impact subsurface processes, community structure and function, are tested. AquaDiva has established the Hainich Critical Zone Exploratory (CZE) in central Germany in an alkaline geological setting of German Triassic Muschelkalk formations. The Hainich CZE includes specialized monitoring wells to access the vadose zone and two main groundwater complexes in limestone and marlstone parent materials along a ~6 km transect spanning forest, pasture and agricultural land uses. Initial results demonstrate fundamental differences in the biota and biogeochemistry of the two aquifer complexes that trace back to the land uses in their respective recharge areas. They also show the importance of antecedent conditions on the impact of precipitation events on responses in terms of groundwater dynamics, chemistry and ecology. Thus we find signals of surface land use and events can be detected in the subsurface CZ. Future research will expand to a second CZE in contrasting siliciclastic parent rock, to evaluate the relative importance of parent material lithology versus surface conditions for the emergent characteristics of the subsurface CZ and biodiversity. The Hainich CZE is open to researchers who bring new questions that the research platform can help answer.
NASA Astrophysics Data System (ADS)
Socorro, J.; Maurrasse, F. J.
2017-12-01
During the Aptian, the semi-restricted Organya Basin accumulated sediments under quasi-continuous dysoxic conditions [1]. High resolution stable carbon isotope (δ13Corg) values for 71.27 m of interbedded limestones, argillaceous limestones and marlstones of the El Pujal sequence show relatively small variability (1.65‰) fluctuating between -25.09‰ and -23.44‰ with an average of -24.02‰. This pattern is consistent with values reported for other Tethyan sections for carbon isotope segment C5 [2]. The geochemical and petrographic results of the sequence, reveal periodic enrichment of redox sensitive trace elements (V, Cr, Co, Ni, Cu, Mo, U), biolimiting (P, Fe) and major elements (Al, Si, Ti) at certain levels concurrent with episodes of enhanced organic carbon preservation (TOC). Inorganic carbonate (TIC) dilution due to significant clay fluxes is also evident along these intervals as illustrated by the strong negative correlation with Al (r = -0.91). Microfacies characterized by higher pyrite concentration, impoverished benthic fauna and lower degree of bioturbation index (3) are in accord with geochemical proxies. When combined, these results suggest recurrent intermittent dysoxic conditions associated with episodic increases of terrigenous supplies by riverine fluxes, which are in agreement with results reported for the basal segment of the section (0-13.77m) [3]. Concurrently, δ13Corg values show a positive correlation with TIC (r = 0.50) and a negative correlation with TOC (r = -0.46), thus showing more negative values corresponding with intervals of highest terrestrial influences, which were previously correlated with higher inputs of higher chain (>nC25) n-alkanes [3]. Hence, the results highlight the local expression of the δ13Corg signal related to higher inputs of terrestrial vegetation linked with lower δ13Corg values modulating the global signature of segment C5. References: [1] Sanchez-Hernandez & Maurrasse, 2016. Palaeo3 441; [2] Menegatti et al., 1998. Paleoceanography 13 530-545; [3] Socorro & Maurrasse, 2016. AGU Fall Meeting Abstracts
NASA Astrophysics Data System (ADS)
Llaguno, J. R.; Maurrasse, F. J.
2016-12-01
Here we present the results of a high-resolution, multiproxy study of a 29 m section of dark nodular limestones and marlstones of the Eastern Prada Mountain Quarry section. The layers yield low bioturbation index (2-3) and TOC up to 1.88 wt. %, with microfacies of dark micrite, and isotropic fabric. Allochems consist of rare ostracods, radiolaria, fragments of echinoderms, ammonites, gastropods, benthic and planktic foraminifera. Globigerinelloides blowi indicates a Barremian-early Aptian age. Porosity consists of vugs filled with apparent bitumen throughout the section. Qualitative EDS analyses indicate CaCO3 predominates in the matrix, in agreement with smear slides showing abundance of calcareous nannofossils, mostly nannoconid fragments. δ13Corg values vary from -26.24 ‰ at 0.7 m, to -23.78 ‰, ( 2.46 ‰ change) at 18.04 m, with higher fluctuations up to 27 m. δ15N values range from 1.82 ‰ to 5.95 ‰ positively correlated with the δ13Corg, especially between 18 m - 27 m. Biomarkers from 16 samples show dominance of short chain n-alkanes (
Chemo- and biostratigraphy of the Late Jurassic from the Lower Saxony Basin, Northern Germany
NASA Astrophysics Data System (ADS)
Erbacher, Jochen; Luppold, Friedrich Wilhelm; Heunisch, Carmen; Heldt, Matthias; Caesar, Sebastian
2013-04-01
The upper Jurassic (Oxfordian to Tithonian) sediments of the Lower Saxony Basin (Northern Germany) comprises a succession of limestones, marlstones and claystones deposited in a shallow marine to lacustrine epicontinental basin situated between the Tethys and the Sub-Boreal seas. Both, the depositional environment and the palaeogeographically isolated position strongly compromise a chronostratigraphic dating of the regional lithostratigraphical and biostratigraphical units. In order to obtain a stratigraphic standard section for the Late Jurassic of the Lower Saxony Basin we drilled a 325 m long core (Core Eulenflucht 1) covering the lower part of the Berriasian (Wealden 2-3 of the Bückeburg Formation) to the lower Oxfordian (Heersum Formation). A compilation with a section outcropping in an active quarry 2 km north of the drill site resulted in a 340 m long section reaching down to the late Callovian (Ornatenton Formation) . Ammonites have only been described in the lowermost, Callovian part of the section. Investigations of benthic foraminifers, ostracods as well as palynology, however, allowed for a rather detailed biozonation of the core. These data indicate the stratigrapical completeness of the section when compared to the regional stratigraphic data of the Lower Saxony Basin. Due to the lack of ammonites in Late Jurassic part of the section, which would have allowed for a correlation with Tethyan successions, high resolution stable carbon isotope data have been produced from bulk rock carbonate. Even though most of the data derive from shallow marine, rather coarse grained carbonates, such as ooliths and floatstones the resulting carbon isotope curve is surprisingly clean with only little "noise" in the upper part (early Tithonian?) of the measured succession. The curve clearly shows some distinctive features reported from biostratigraphically well-dated carbon isotope records of the Northern Tethys (e.g. Bartolini et al., 2003, Padden et al., 2002, Rais et al., 2007) and the Sub-Boreal (Nunn et al., 2009, Nunn & Price, 2010). Therefore it allows for a correlation of isotope excursions such as the pronounced mid-Oxfordian positive and the two brief negative excursions of the mid-Oxfordian, the broad positive excursion in the late Oxfordian and a general trend towards light values starting at the Kimmeridgian-Tithonian boundary. This results in a chronostratigraphic re-interpretation of the Oxfordian to lower Tithonian litho- and biostratigraphic units in the Lower Saxony Basin, details of which are presented on our poster.
NASA Astrophysics Data System (ADS)
Yousif, Ibrahim; Abdullatif, Osman; Makkawi, Mohammed; Abdulghani, Waleed
2017-04-01
This study investigates the microfacies and sequence stratigraphic frame work of the Middle Jurassic Dhruma Formation in outcrops in central Saudi Arabia. The study contributes to the efforts to understand and enhance local and regional stratigraphic relationship and correlation of the Jurassic carbonate sequences and their significance to reservoir description and prediction in the subsurcae. The study describes and characterizes the sedimentology, microfacies and the stratigraphy of Dhruma Formation from outcrop sections having a total thickness of 70 m. Detailed microfacies and high-resolution stratigraphical analysis were carried out to determine microfacies, cyclicity, sequences and staking pattern. The study revealed ten lithofacies namely: oolitic grainstone,bioclastic oolitic grainstone, oolitic grapestone, bioclastic grainstone,foraminiferal packstone, echinoderm packstone, peloidal packstone to grainstone,skeletal wackestone to packstone, mudstone, and marlstone.These lithofacies were grouped into five lithofacies associations that deposited on a carbonate ramp setting. The depositional environment ranging from low energy lagoonal setting to high-energy shoals and banks to low energy outer ramp setting. Five high-resolution composite sequences have been defined and each sequence is composed at the bottom of intercalated mudstone/wackestone that passing up into grainstone lithofacies.The composite sequences range in thickness from 7 to 15 m, while the parasequences range from 0.5 to 1.5 m. The composite sequences extend laterally for a distance of more than 350 m. The overall composite section shows a shallowing upward succession of the 4th to the 5th order high-resolution sequences.The dominant lithofacies are the grainy ones, which constitute 30%, 50% and 80% of the studied sections. Furthermore, the parasequences thickness and their bio-components are increasing towards the top. The muddy lithofacies intensively affected the vertical continuity of the lower reservoir interval compared to the upper interval. Detailed examination of thin-sections reflects a clear and well-developed reservoir interval in the uppermost part of the section, which is dominated by peloidal packstone and grainstone.The findings of this high-resolution outcrop analog might help to understand and predict lithofacies, stratigraphic heirachies and correlations of Dhruma Formation within the interwell spacing. Moreover, this study might also contribute to better reservoir description and assessment of its quality and architecture in subsurface equivalent reservoirs.
NASA Astrophysics Data System (ADS)
Herdocia, C.; Maurrasse, F. J.
2017-12-01
The thick (> 4.5 km) sedimentary succession of the Organya Basin includes the Cabo Formation [1] which is well exposed in the Cabo valley area and is characteristically composed of black to dark gray marlstones and limestones that accumulated during the greenhouse climate and contain variable amount of organic matter [2-4]. Here we present geochemical results to assess redox conditions of 35.6 m of the Cabo Formation near the Barremian / Aptian boundary, along Catalunya Route C-14, immediately north of the town of Organya. TOC values range between 1 wt% and 5.8 wt%, and peak in all black limestones (0.43 m, 4.38 m, 14.85 m, 29.95 m, and 35.6 m). These TOC values average about 2.0 wt %, except at a height of 0.43 m, where the TOC has a strong peak (5.78 wt%). TIC values oscillated between 86.7 wt% and 96.8 wt%, and averaged at 92.7 wt% and show a strong negative correlation with TOC (r = -0.78). Measured carbon isotope on the organic carbon fraction (δ13Corg) showed fluctuations that ranged from -24.41‰ to -22.15‰. The TOC and δ13Corg curves show a positive correlation (r = 0.58), suggesting that carbon sequestration in the basin followed the overall global signature. Redox sensitive trace elements (V, Ni, Cu, and Mo) correlate with TOC values (r > 0.6), suggesting that dysoxic conditions were responsible for the preservation of organic matter. Biolimiting trace elements (Fe, P) also correlate positively with redox trace elements, and both have highest concentrations at 14.85 m, in concurrence with a high TOC value (2.93 wt%) indicating high primary productivity at that level. Major elements (Al, Si, and Ti) also correlates slightly with TOC (Al: r = 0.39; Si: r = 0.36; Ti: r = 0.43). References: [1] García-Senz, J., 2002, PhD Thesis, University of Barcelona, 310 pp. [2] Bernaus, J.M., et al., 2003. Sedimentary Geology 159 (3-4), 177-201. [3] Caus, E., et al., 1990. Cret. Research 11, 313-320. [4] Sanchez-Hernandez, Y., Maurrasse, F.J-M.R. 2014. Chem.Geology 372, 12-31.
NASA Astrophysics Data System (ADS)
Salacup, J. M.; Petsch, S. T.; Leckie, R.
2007-12-01
The Upper Cretaceous Niobrara cyclothem (upper Turonian-lower Campanian) is a second-order transgressive- regressive cycle of the Cretaceous Western Interior Seaway reflecting interactions among eustatic sea level change, regional tectonic events, and sediment supply. These strata provide a unique window into Late Cretaceous sediment deposition and paleoceaonographic conditions in an epicontinental seaway. However, the response of organic matter production and burial to these forcings remains less than fully resolved. Geochemical analyses of the Montezuma Valley and Smoky Hill Members of the Mancos Shale at its principal reference section at Mesa Verde, Colorado, reveal potential relationships among organic matter abundance and composition, paleoceanographic conditions inferred from microfossils, and sea level change. These rock units represent transgression and early highstand of the Niobrara cyclothem. At Mesa Verde, the upper Smoky Hill coincides with the spatially-restricted but temporally-extended Oceanic Anoxic Event 3 of middle Coniacian to early Santonian age (~88.5-86.5 Ma). It is broadly characterized as dark-gray, foraminifer-rich calcareous shale, mudstone, and marlstone. Bulk geochemical properties, including %TOC, %CaCO3, and C/N, reflect changes in organic matter delivery and preservation, and are closely correlated to inferred water-depth and/or distance from shore. Proximity to the western paleo-shore appears to exercise a primary control over the composition of the identified biomarkers with secondary influence from redox-sensitive diagenetic processes and autochthonous microbial production, which in turn may reflect higher-order sea-level fluctuations. Changes in n-alkane, hopane, and sterane distributions are coincident with the second-order transgression of the seaway. Additionally, the presence in some samples of long-chain alkylcycloalkanes and alkylbenzenes may reflect the direct cyclization and aromatization of precursor algal and bacterial fatty acids in a reducing environment. Branched alkanes with quaternary substituted carbon atoms, thought to reflect input from chemosynthetic bacteria living near redox boundaries, are also detected. Relationships existing between sequence stratigraphy and the bulk and detailed molecular geochemistry of the Montezuma Valley and Smoky Hill members shed light on the factors, both global and regional, responsible for the composition of biogeochemical signals expressed in the sedimentary record. A better understanding of the processes affecting such signals is crucial in their use and application in paleoenvironmental and paleoceanographic reconstructions.
NASA Astrophysics Data System (ADS)
Nowak, Martin E.; Schwab, Valérie F.; Lazar, Cassandre S.; Behrendt, Thomas; Kohlhepp, Bernd; Totsche, Kai Uwe; Küsel, Kirsten; Trumbore, Susan E.
2017-08-01
Isotopes of dissolved inorganic carbon (DIC) are used to indicate both transit times and biogeochemical evolution of groundwaters. These signals can be complicated in carbonate aquifers, as both abiotic (i.e., carbonate equilibria) and biotic factors influence the δ13C and 14C of DIC. We applied a novel graphical method for tracking changes in the δ13C and 14C of DIC in two distinct aquifer complexes identified in the Hainich Critical Zone Exploratory (CZE), a platform to study how water transport links surface and shallow groundwaters in limestone and marlstone rocks in central Germany. For more quantitative estimates of contributions of different biotic and abiotic carbon sources to the DIC pool, we used the NETPATH geochemical modeling program, which accounts for changes in dissolved ions in addition to C isotopes. Although water residence times in the Hainich CZE aquifers based on hydrogeology are relatively short (years or less), DIC isotopes in the shallow, mostly anoxic, aquifer assemblage (HTU) were depleted in 14C compared to a deeper, oxic, aquifer complex (HTL). Carbon isotopes and chemical changes in the deeper HTL wells could be explained by interaction of recharge waters equilibrated with post-bomb 14C sources with carbonates. However, oxygen depletion and δ13C and 14C values of DIC below those expected from the processes of carbonate equilibrium alone indicate considerably different biogeochemical evolution of waters in the upper aquifer assemblage (HTU wells). Changes in 14C and 13C in the upper aquifer complexes result from a number of biotic and abiotic processes, including oxidation of 14C-depleted OM derived from recycled microbial carbon and sedimentary organic matter as well as water-rock interactions. The microbial pathways inferred from DIC isotope shifts and changes in water chemistry in the HTU wells were supported by comparison with in situ microbial community structure based on 16S rRNA analyses. Our findings demonstrate the large variation in the importance of biotic as well as abiotic controls on 13C and 14C of DIC in closely related aquifer assemblages. Further, they support the importance of subsurface-derived carbon sources like DIC for chemolithoautotrophic microorganisms as well as rock-derived organic matter for supporting heterotrophic groundwater microbial communities and indicate that even shallow aquifers have microbial communities that use a variety of subsurface-derived carbon sources.
WSA index as an indicator of soil degradation due to erosion
NASA Astrophysics Data System (ADS)
Jaksik, Ondrej; Kodesova, Radka; Schmidtova, Zuzana; Kubis, Adam; Fer, Miroslav; Klement, Ales; Nikodem, Antonin
2014-05-01
Knowledge of spatial distribution of soil aggregate stability as an indicator of soil degradation vulnerability is required for many scientific and practical environmental studies. The goal of our study was to assess predisposition of different soil types to change aggregate stability due to erosion. Five agriculture arable lands with different soil types were chosen. The common feature of these sites is relatively large slope and thus soils are impacted by water erosion. The first studied area was in Brumovice. The original soil type was Haplic Chernozem on loess, which was due to erosion changed into Regosol (steep parts) and Colluvial soil (base slope and the tributary valley). A similar process has been described at other four locations Vidim, Sedlcany, Zelezna and Hostoun, where the original soil types were Haplic Luvisol on loess and Haplic Cambisol on gneiss, Haplic Cambisol on shales, and Calcaric Cambisol on marlstone, respectively. The regular and semi-regular soil sampling grids were set at all five sites. The basic soil properties were measured and stability of soil aggregates (WSA index) was evaluated. In all cases, the higher aggregates stability was observed in soils, which were not (or only slightly) affected by water erosion and at base slope and the tributary valley (eroded soil particle accumulation). The lowest aggregate stability was measured at the steepest parts. When comparing individual sites, the highest WSA index, e.g. aggregate stability, was found in Sedlcany (Cambisol). Lower WSA indexes were measured on aggregates from Hostoun (Cambisol), Zelezna (Cambisol), Vidim (Luvisol) and the lowest values were obtained in Brumovice (Chernozem). The largest WSA indexes for Cambisols in comparison to Luvisols and Chernozem could be attributed to higher organic matter content and presence of iron oxides. Slightly higher aggregate stability of Luvisols in comparison to Chernozem, could be explained by the positive influence of clay (especially in form of clay coatings) and organic matter, and negative impact of pH. The largest range of WSA values were found for Sedlcany (WSA = 0.41 to 0.93), followed by Vidim (WSA = 0.32 to 0.78) and Brumovice (0.20 to 0.67), Zelezna (WSA = 0.35 to 0.78) and Hostoun (WSA = 0.53 to 0.85). This indicates that the largest impact of erosion on aggregate stability was measured for Cambisol in Sedlcany. Similar impact of soil erosion was observed for both soils on loess and Cambisol in Zelezna. The lowest impact of erosion on aggregate stability was measured for Cambisol in Hostoun. Acknowledgement: Authors acknowledge the financial support of the Ministry of Agriculture of the Czech Republic No. QJ1230319
Birdwell, Justin E.; Lewan, Michael D.; Miller, Michael; Baez, Luis; Beeney, Ken; Sonnenberg, Steve
2013-01-01
A uniaxial confinement clamp was used on Woodford Shale cores in hydrous pyrolysis experiments to study fracture development during thermal maturation. The clamp simulates overburden in that it prevents cores from expanding perpendicular to bedding fabric during the volume-increasing reactions associated with petroleum generation. Cores were cut from a slab of immature Woodford Shale and subjected to hydrous pyrolysis under confinement at 300, 330, and 365 °C for 72 hours to induce thermal maturities ranging from early bitumen to maximum expelled-oil generation. Two additional cores were used as experimental controls: (1) a confined core was saturated with water by heating it to 100 °C under hydrous pyrolysis conditions for 72 hours to use for characterization of the original rock, and (2) an unconfined core was heated at 365 °C for 72 hours to evaluate the effects of confinement on petroleum generation and expulsion. X-ray computed tomography (X-CT) imaging and other analyses identified five distinct beds within the cored interval. Using a tentative classification system, beds 1, 2, and 3 are described as dolomitic marlstone (DM) with total organic carbon (TOC) contents of 7.7, 5.8, and 7.7 wt. %, respectively; bed 4 is a cherty quartzose claystone (CQC) with TOC content of 5.5 wt. %; and bed 5 is a quartzose claystone with TOC content of 10.9 wt. %. Bed samples all had similar Rock-Eval hydrogen indices (600 ± 46 mg S2/g-TOC) and Tmax values (433 ± 2 °C), demonstrating organic matter uniformity and low thermal maturity. The X-CT scan of the core heated to 100 °C showed preexisting fractures that were nearly perpendicular to the bedding fabric primarily in the low-TOC DM bed 2 and CQC bed 4. Heating led to enhancement of preexisting fractures in the confined cores with the greatest enhancement occurring in CQC bed 4. The fractures increased in size and intensity with temperature. This is attributed to the internal pressure generated by volume-increasing reactions during the conversion of kerogen to bitumen and bitumen to oil and gas. The unconfined core heated to 365 °C showed no enhanced fracturing and its X-CT-scan resembled that of the 100 °C confined core. Comparison of the oil and gas yields from the confined and unconfined cores heated to 365 °C showed no significant differences, indicating that product expulsion is not inhibited by the procedure used in this study. These results also indicate that fracturing during thermal maturation is driven primarily by the enhancement of existing fractures.
NASA Astrophysics Data System (ADS)
Perkone, E.; Delina, A.; Saks, T.; Raga, B.; Jātnieks, J.; Klints, I.; Popovs, K.; Babre, A.; Bikše, J.; Kalvāns, A.; Retike, I.; Ukass, J.
2012-04-01
Carbonate aquifers show a very wide range of hydrogeological characteristics. Carbonate rock hydrogeology display two extremes: on one hand hydrogeological properties of the carbonates are governed by the pathways of the preferential groundwater flow typical in karstic regions, on the other - some carbonate aquifers behave almost like a homogeneous, isotropic, porous medium. Most lie between these extremes, but these case variations complicates the study of carbonate aquifer properties. In this study the results of the hydraulic conductivity in carbonate aquifers measurements, hydraulic conductivity correlation between sediments lithology and the aquifer surface depth and fractures research is presented. Upper Devonian Frasnian stage Pļaviņu and Daugava carbonate aquifers in the Latvian part of the Baltic basin is considered. The aim of this research is to elaborate characteristic hydraulic conductivity values for each aquifer based on existing data of the pumping test results and other aquifer properties. Pļaviņu and Daugava carbonate aquifers mainly consist of jointed dolomite with intermediate layers of dolomitic marlstone, limestone, clays and gypsum. These aquifers are prevalent in most of the study area, except Northern and South - Eastern parts of the territory. In geological structure Daugava aquifer lies above Pļaviņu aquifer. Daugava aquifer depth changes from 10 - 20 and even less meters in Eastern part to 250 - 300 m in South - West part of study area, but thickness varies from few meters to 30 m. Pļaviņu aquifer surface depth varies from 20 - 30 m, but in uplands surface depth reaches more than 120 m, in Eastern part to more than 300 m in South - West part of study area. Aquifer average thickness varies from 20 - 40 m, but in areas with buried valleys thickness can be less than 10 meters. Outcrops of these sediments are occurring in banks of largest rivers and in some areas aquifers are karstified. In studies of the carbonate aquifers it is very important to take into account the fact that groundwater flow in carbonate aquifers is often almost entirely dependent on jointing and concomitant joint enlargement by dissolution. In this study pumping test results provide a wide range of hydraulic conductivity values, for example in Pļaviņu aquifer hydraulic conductivity varies from 0,03 - 266 m/day but in Daugava aquifer values range from 0,06 - 735 m/day. Pumping test results is provided by Latvian Environment, Geology and Meteorology Centre. Studying average values of hydraulic conductivity there exists a correlation between K and aquifer flat depth - Daugava aquifer, which in geological structure, is located above the Pļaviņu aquifer has higher average K value - 32 m/day, in Pļaviņu aquifer - 27 m/day. Correlative study of the depth and hydraulic conductivity allowed to characterize the mean values as function of the aquifer depth for the regional groundwater flow modelling. This study is supported by the European Social Fund project No. 2009/0212/1DP/1.1.1.2.0/09/APIA/VIAA/060
Landslides and the Fault Surface Ruptures during the 2008 Wengchuan Earthquake, Sichuan, China
NASA Astrophysics Data System (ADS)
Chigira, M.; Xiyong, Wu; Takashi, Inokuchi; Gonghui, Wang
2009-04-01
2008 Sichuan earthquake with a magnitude of Mw 7.9 induced numerous mass movements around the fault surface ruptures of which maximum separations we observed were 3.6 m vertical and 1.5 m horizontal (right lateral). In order to clarify the distribution of these landslides and to characterize them, we interpreted satellite images and made field investigation for 3 weeks by using these images. We used satellite ALOS images taken by the sensors AVNIR II with a resolution of 10 m and PRISM with a resolution of 2.5 m, both of which were taken on 4th in June. We also used satellite images of before and after the earthquake provided by Google Earth. The affected area was mountainous areas with elevations from 1000 m to 4500 m on the west of the Sichuan Basin. Ridges and valleys are generally trending NE parallel to the trends of the geologic structures, while large rivers, such as the Minjiang River, and the Fujiang River are flowing from the north or northwest to the south or southeast, crossing these trends. The NE-trending Longmenshan fault zone runs along the boundary between the mountains and the Sichuan basin (He and Tsukuda, 2003), of which Yinghsiuwan-Beichuan fault was the main fault that generated the 2008 earthquake (Xu, 2008). The basement rocks of the mountainous areas range from Precambrian to Cretaceous in age. They are basaltic rocks, granite, phyllite, dolostone, limestone, alternating beds of sandstone and shale, etc. (Geologic map of China). Landslide distribution areas were mainly of two types: One was the area along the fault that generated this earthquake, and another was along the steep slopes of inner valleys along the Minjian River. Landslides were concentrated on the hanging wall of the earthquake fault, which appeared for more than 180 km along the Longmenshan fault zone. The distribution area of landslides was wider around the middle and the southwest parts of the surface rupture trace and became narrower to the northeast. The directions of the landslides were controlled by the fault: Landslides moving normal to the fault ruptures were most prevailing probably due to the directivity of the seismic wave. The most common landslides were of carbonate rocks, which could be attributable to the decrease in shear strength because of its dissolution by subsurface water. Relatively shallow landslides were concentratedly induced on the slopes in the valley of the Mingjian River from Yinghsiuwa through Wengchan to Maoxian. These slopes seem to be the inner gorges (Kelsey, 1998), which are formed by the acceleration of erosion, leading to the destabilization of valley slopes (Chigira, 2006). The inner valleys are as steep as 35 to 40 degrees with about 500 m height. Largest landslide in the history occurred in the middle of the affected area. It was 1.3 km wide and 5 km long with an area of 7 million m2 and its volume may be 1 billion m3 from the images of the satellite ALOS. This landslide was preceded by gravitational deformation, which was represented by a ridge-top depression. More than 30 landslide dams were made; dams consisting of large carbonate rubbles apparently stable and dams consisting of weathered marlstone or phyllite less stable.
Organic chemical composition of mud from the LUSI mud volcano, Sidoarjo, East Java, Indonesia
NASA Astrophysics Data System (ADS)
Rosenbauer, R. J.; Campbell, P.; Lam, A.
2009-12-01
Sidoarjo, East Java, Indonesia is the site of LUSI, a terrestrial mud volcano that has been erupting since May 29, 2006. In response to a U.S. Department of State request, the U.S. Geological Survey has been assisting the Indonesian Government to describe the geological and geochemical aspects and potential health risk of the mud eruption. We report here on the organic chemical composition of the mud. Organic chemical analyses were carried out by gas chromatography/mass spectroscopy following organic extraction by microwave-assisted solvent extraction and compound fractionation by adsorption chromatography. There is a petroliferous component in the mud that is fresh, immature, and nonbiodegraded. There is a complete suite of n-alkanes with a bell-shaped pattern typical of fresh petroleum with a Cmax around C20. The alkane content ranges from 0.12 to 1.01 mg/kg dry mud. The presence of certain hopanes (i.e. 17 α,21β(H)-30-norhopane and 17α,21β(H)-hopane) is also indicative of the presence of oil. The proportions of other biomarker compounds (pristane/phytane = 2.4) and the dominance of the C27 sterane (5α(H),14α(H),17α(H)-chlolestane) suggest that oil formed under oxic conditions and has a likely coastal marine or terrigenous source. The presence of oleanane indicates a Cretaceous or younger age for the petrogenic material. These geochemical parameters are consistent with Indonesian oil derived from Tertiary marlstone source rocks that contained kerogen deposited under oxic conditions, probably the upper Miocene Klasafet Formation. Polycyclic aromatic hydrocarbons (PAHs) are present and range in content from 0.1 to 2.2 mg/kg dry mud. The low molecular weight (LMW) PAHs, in particular, naphthalene and methyl-naphthalene are dominant except for perylene which is ubiquitous in the environment. The presence of both parent and higher homologue PAHs indicate a petrogenic rather than combustion source. PAHs are known carcinogens but toxicity data in sediments are sparse and often qualitative, depending on the PAH matrix and thus bioavailability. The distribution and content of PAHs measured in the LUSI mud do exceed USEPA recommended interim sediment quality criteria. In addition, judging sediment toxicity on the basis of single PAH compounds risks underestimating effects because mixtures of PAHs tend to aggregate toxicity. Further studies are needed to determine whether or not PAHs are present in levels that exceed soil remediation or aquatic guidelines. The mud contains low levels (tens of ppb) of the higher plant sterols including stigmasterol and β-sitosterol. Also, 22-dehydrocholesterol (generally ascribed to algal material) is present at 39 ppb. These compounds are derived from natural sources, are non-hazardous, and were likely entrained in the mud during ascent to the surface or mixed with the mud post-eruption. The organic compounds identified to date will exhibit a variety of environmental behaviors and effects. Some compounds will volatilize and photo-oxidize or biodegrade relatively quickly (i.e. n-alkanes), and are relatively nontoxic. LMW PAHs are sparingly soluble in water but heavier PAHs will likely persist in the environment and represent potential toxicity to biota because PAHs are bio-accumulative. But the overall toxicity of the mud appears low.
NASA Astrophysics Data System (ADS)
Alejandro Ruiz-Ortiz, Pedro; Aguado, Roque; Castro, José Manuel; Gallego, David; de Gea, Ginés Alfonso; Jarvis, Ian; Molina, José Miguel; Nieto, Luis Miguel; Pancost, Richard; Quijano, María Luisa; Reolid, Matías; Rodriguez, Rafael; Skelton, Peter; Weisser, Helmut
2017-04-01
The occurrence of time intervals of enhanced deposition of organic matter (OM) during the Cretaceous, defined as Oceanic Anoxic Events (OAE), reflect abrupt changes in global carbon cycling. The Aptian OAE1a (120 Ma), represents an excellent example, recorded in all the main ocean basins, associated to massive burial of organic matter in marine sediments [1]. Much research has been done on the OAE1a from different sections in the world over the last decades, including the definition of the C-isotope stratigraphy of the event [2]. Notwithstanding, higher-resolution studies across the entire event will be crucial to shed light into the precise timing and rates of the different environmental and biotic changes that occurred. The Cau section is located in the easternmost part of the Prebetic Zone (Betic Cordillera), which represents the platform deposits of the Southern Iberian palaeomargin. The Lower Aptian of the Cau section is represented by a hemipelagic unit (Almadich Formation, ca. 200 m thick), deposited in a highly subsiding sector of a tilted block, located in the distal parts of the Prebetic Platform. Previous studies of the Lower Aptian of the Cau section have focused on the stratigraphy, bioevents, C-isotope stratigraphy, and organic and elemental geochemistry [3], [4], and in the reconstruction of pCO2 from organic geochemistry proxies [5]. All these studies reveal that the Cau section represents an excellent site to investigate the OAE 1a, based on its unusual high thickness and stratigraphic continuity, the quality and preservation of fossils and the geochemical signatures. Here we present the first results of a high-resolution carbonate C-isotope study based on the the analysis of three new research cores drilled at Cau in autumn 2015 [6]. These new data represent an important advance in the knowledge of the C-isotope record of the OAE 1a, presenting a more continuous record at a higher resolution than previous studies. This leads to the refining of the correlation with previously defined and worldwide recognized C-isotope segments of Menegatti et al. [2]. Along with the C-isotope stratigraphy, correlated with previous biostratigraphic and geochemical data from outcrop studies, profiles of magnetic susceptibility data (measured from the core in the laboratory) and geophysical log profiles measured down-hole, are presented. Preliminary sedimentological analyses of the core have been completed, with a focus on lithology and sedimentary structures, including ichnofacies of bioturbated levels. The facies association is dominated by dark marlstones, displaying a cyclic vertical organization. These results confirm and refine previous data, and will be the base for ongoing analytical studies at a high-resolution scale, covering geochemical, biostratigraphic, sedimentological, ichnological and cyclostratigraphic analyses of the core. Acknowledgements: This work is a contribution of the research project CGL2014-55274-P (Gov. of Spain) and Research Group RNM-200 (PAIDI-JA). [1] Robinson et al. (2017). Sedimentology, 64, 1-15 [2] Menegatti et al. (1998). Paleoceanography 13, 530-545. [3] Gea et al. (2003) Palaeo3. 200, 207-219. [4] Quijano et al. (2012). Palaeo3. 365-366, 276-293. [5] Naafs et al. (2016). Nat. Geosc. 9 (2), 135-139. [6] Ruiz-Ortiz et al. (2016). Sci. Dril. 21, 41-46.
Milankovitch Cyclicity in the Eocene Green River Formation of Colorado and Wyoming
NASA Astrophysics Data System (ADS)
Machlus, M.; Olsen, P. E.; Christie-Blick, N.; Hemming, S. R.
2001-12-01
The Eocene Green River Formation is a classic example of cyclic lacustrine sediments. Following Bradley (1929, U.S.G.S. Prof. Paper 158-E), many descriptive studies suggested precession and eccentricity as the probable climatic forcing to produce the cyclic pattern. Here we report spectral analysis results that confirm this hypothesis. Furthermore, we have identified the presence of a surprisingly large amplitude obliquity cycle, the long-period eccentricity cycle (400 k.y.) and the long period modulators of obliquity. Spectral analyses of data from Colorado were undertaken on an outcrop section and core data using two different proxies for lake depth. In a section measured in the west Piceance Creek basin, three lithologies (ranks) were used as a proxy for relative water depth, from relatively shallow to deep water: laminated marlstones; microlaminated, light-colored oil-shales; and microlaminated black oil shales. A multi-tapered spectrum of the 190-m-thick record in the depth domain shows significant peaks at periods of 2.1, 3.4, 12 and 39 m. These are interpreted as the precession, obliquity and eccentricity cycles. The precession cycle confirms Bradley's independent estimate of 2.4 m per 20 k.y. cycle, based on varve counts at the same location. A high-amplitude, continuous 3.4 m (obliquity) cycle exists in the evolutive spectrum of this record. A second spectral analysis of an oil-shale-yield record was made on a 530 m core near the basin depocenter. This record includes the time-equivalent of the outcrop section, spans a longer interval of time, and has a higher sedimentation rate. Peaks are found at 5, 10, 25 and 79 m. Again, the probable obliquity peak, at 10 m, is continuous along the record. Initial tuning of this record to a 39.9 k.y. cosine wave improves the resolution of the precession, short and long eccentricity cycles. Spectral analysis of oil shale yield and sonic velocity data of cores from the Green River basin, Wyoming, gives similar results. Spectral peaks at 6, 13, 31 and 122 m appear mainly in the Tipton and the Wilkins Peak members. The correlation between oil shale yield, lithology and relative water depth was examined in the upper part of the Wilkins Peak Member and the Lower part of the Laney Member. The succession from microlaminated black oil shale to laminated micrite corresponds with documented lateral changes in facies from deep to shallow environments, thus confirming the use of these facies as relative water-depth proxies. Furthermore, the upsection record of oil shale yields correlates with these facies, with higher yields corresponding to deeper water facies. This correlation supports the use of the oil shale yield record as a proxy for short-term lake-level changes, and therefore a proxy for climate. The spectral analysis results from both basins show the importance of the obliquity cycle in these continental records. This cycle cannot be identified by cycle-counting, and therefore was not previously recognized. Earlier published attempts at spectral analysis of short records from the Piceance Creek and Uinta basins misinterpreted the observed cycles. This is the first time both the obliquity cycle and the long-term eccentricity cycle have been identified in the Green River and Piceance Creek basins.