Marx and the Kabbalah: Aaron Shemuel Lieberman's Materialist Interpretation of Jewish History.

PubMed

Stern, Eliyahu

2018-01-01

This essay addresses the reception of Karl Marx's writings among Russian Jewish revolutionaries in the 1870s. It explores the way Aaron Shemuel Lieberman (1843-1880), known as "the father of Jewish socialism," interpreted Marx through a kabbalistic prism. It argues that Jews were attracted to Marx in part because of the overlaps between historical materialism and certain strands of the kabbalistic tradition. It also sheds light on the early reception of Marx and the way his theory of revolution was reinterpreted to reflect the unique socio-economic conditions of the Russian Empire.

[Medical history impressions of Karl Marx 1983].

PubMed

Kaiser, W

1983-12-15

Excerpts of his London era first published on the occasion of the Karl Marx testimonials of 1983 gave rise to extend the memory of the fundamental achievements of Karl Marx to medico-historical aspects. In this case Karl Marx paid special attention to the working and living conditions of the working class and an analysis of his adequate statements and records shows multifarious details which give a research basis also for the history of medicine. Marx and Engels had friendly contacts with several physicians who shared the opinions of the two classics: their way of life is shown in the most important points.

Development of a hybrid mode linear transformer driver stage

NASA Astrophysics Data System (ADS)

Zhang, Le; Wang, Meng; Zhou, Liangji; Tian, Qing; Guo, Fan; Wang, Lingyun; Qing, Yanling; Zhao, Yue; Dai, Yingmin; Han, Wenhui; Chen, Lin; Xie, Weiping

2018-02-01

At present, the mainstream technologies of primary power sources of large pulse power devices adopt Marx or linear transformer driver (LTD) designs. Based on the analysis of the characteristics of these two types of circuit topologies, the concept of a hybrid mode LTD stage based on Marx branches is proposed. The analysis shows that the hybrid mode LTD stage can realize the following goals: (a) to reduce the energy and power handled by the basic components (switch and capacitor) to lengthen their lifetime; (b) to reduce the requirements of the multipath synchronous trigger system; and (c) to improve the maintainability of the LTD stage by using independent Marx generators instead of "traditional LTD bricks." To verify the technique, a hybrid mode LTD stage consisting of 50 branches (four-stage compact Marx generators) was designed, manufactured and tested. The stage has a radius of about 3.3 m and a height of 0.6 m. The single Marx circuit's load current is about 21 kA, with a rise time of ˜90 ns (10%-90%), under the conditions of capacitors charged to ±40 kV and a 6.9 Ω matched load. The whole stage's load current is ˜1 MA , with a rise time of ˜112 ns (10%-90%), when the capacitors are charged to ±45 kV and the matched load is 0.14 Ω .

Performances of a Compact, High-Power WB Source with Circular Polarization

NASA Astrophysics Data System (ADS)

Delmote, P.; Pinguet, S.; Bieth, F.

This paper presents the design and the performances of an embedded high-power microwave (HPM) wideband source, developed and built at the French-German Research Institute of Saint-Louis. The system was intended for dual use, homeland security, and military applications. It is powered by a 400 kV compact Marx generator with specificities in coaxial design and low energy. The slow monopolar signal from the Marx is sharpened using a pulse-forming stage, made of a switching module pressurized with nitrogen, followed by a monopulse-to-monocycle converter. The duration and rise times of this signal could be adjusted by varying the pressure and space between electrodes. Repetitive operations were performed up to 100 Hz during 10 s without a gas flow. Two kinds of antennas can be connected to the source. The first one is a TEM horn, with an optional dielectric lens, that radiates a vertically polarized UWB short pulse. The second one is a nine-turn helix, working in Kraus monopolar axial mode and radiating a circularly polarized wideband signal along the main axis. A dedicated conical reflector increases its directivity and bandwidth. The whole source is designed to be embedded inside an aluminum trailer, powered by batteries and remote controlled through an optical fiber.

Marx's scientific theory of surplus population.

PubMed

Liu, Z

1985-07-01

This paper discusses Marx's scientific theory of surplus population in relation to the Malthusian theory of population. Marx establishes the principle that the existence of relative surplus population is determined by the immanent conditions of the mode of social production. Marx proves scientifically that the appearance of capitalist surplus population is not due to the abstract numerical ratio relation proposed by Mathus in which natural reproduction of humanity takes the geometric progression and the increase in the means of subsistence the arithmetic, but is the result of capitalist accumulation, the increase of the organic component of capital, the incessant increase in constant capital, and the relative decrease in the variable part of capital. Surplus population, according to Marx, cannot be compared with the surplus of the means of subsistence but with its condition of reproduction. Marx differentiates the surplus population into 2 kinds: the ancient population presses on the productive power, while modern productive power presses on population. In class society based on private ownership of the means of production, laborers can realize the integration with the means of production only under the condition that they provide the exploiters with surplus product; therefore, a certain amount of the laboring population are always turning into the relative surplus population. In the process of transition from the transitional to the modern type of population reproduction, there exists a traditional type of population characterized by a high birth rate, low mortality, and high natural growth rate. The situation in China is the result of the level of development of the productive forces and the corresponding underdevelopment of culture and education, but it is by no means the result of the effect of Malthus's "natural law" that population increases in a geometric progression.

Comparison of the recently proposed super-Marx generator approach to thermonuclear ignition with the deuterium-tritium laser fusion-fission hybrid concept by the Lawrence Livermore National Laboratory

DOE PAGES

Winterberg, F.

2009-01-01

The recently proposed super-Marx generator pure deuterium microdetonation ignition concept is compared to the Lawrence Livermore National Ignition Facility (NIF) Laser deuterium-tritium fusion-fission hybrid concept (LIFE). In a super-Marx generator, a large number of ordinary Marx generators charge up a much larger second stage ultrahigh voltage Marx generator from which for the ignition of a pure deuterium microexplosion an intense GeV ion beam can be extracted. Typical examples of the LIFE concept are a fusion gain of 30 and a fission gain of 10, making up a total gain of 300, with about ten times more energy released into fissionmore » as compared to fusion. This means the substantial release of fission products, as in fissionless pure fission reactors. In the super-Marx approach for the ignition of pure deuterium microdetonation, a gain of the same magnitude can, in theory, be reached. If feasible, the super-Marx generator deuterium ignition approach would make lasers obsolete as a means for the ignition of thermonuclear microexplosions.« less

Series Fault Limiting Resistors for Atlas Marx Modules

DTIC Science & Technology

1995-07-01

use Reticulated Vitreous Carbon (RVC)2 foam blocks for the series resistor element. The blocks will serve as a resistive transmission line on the...3,4. 2. Joseph Wang, (Department of Chemistry, New Mexico State University, Las Cruces NM 88003, USA), " Reticulated Vitreous Carbon -A New Versatile...0.08 Ohm-em fitting our requirements well. The process of producing RVC results in a reproducibly refined form of continuous-fiber, vitreous Carbon

Design of the Individual Marx Modules for the Atlas Machine 36 Megajoule, 25 Megampere Capacitor Bank

DTIC Science & Technology

1995-06-01

solid body resistors have been chosen for Atlas. For the series damping resistors, reticulated vitreous carbon (RVC) foam plate resistors will be...utilized. RVC resistors are available as a foam like glassy carbon material available with various pore size, ligament density, and ligament diameter...contact louvers used at the current joint interface. This mitigates the necessity of high torque and critical alignment connections. Carbon rod style

Marx and the Education of the Future

ERIC Educational Resources Information Center

Rikowski, Glenn

2004-01-01

With reference to Karl Marx's writings on education, this article outlines the education of the future as anti-capitalist education. In starting out from a conception of communism as the "real movement which abolishes the present state of things" (Marx), it is argued that the anti-capitalist education of the future consists of three…

[Karl Marx and the Malthusian theory of population].

PubMed

Jaggi, S

1985-06-01

An analysis of the works of Karl Marx is presented in order to demonstrate the importance of the population factor. The author contends that population growth is a critical factor in Marx's theory of the progressive impoverishment of the working class. However, because of his reluctance to acknowledge the value of the Malthusian contribution, Marx focused his analysis of the labor force under capitalism on the demand for workers and neglected the supply side, which is determined by the growth of population. The author concludes that Marxist theory would have benefited from greater consideration of Malthusian theory.

[Experiences and results in hypertension screening in women between 20 and 65 years of age in Karl-Marx-City].

PubMed

Voigt, G; Börker, G; Edelmann, S; Hartung, A; Hartung, G; Heyne, S; Töpfer, V

1980-11-15

From 1975 to 1979 in the district of the City of Karl-Marx-Stadt 91,130 females at the age between 20 and 65 years were summoned to a gynaecologico-cardiological mass examination which was supported by computer. 56,460 females underwent the examination. According to the WHO-criteria two measurements of blood pressure were carried out, when increased blood pressure was present a third one and a fourth one by an examination group. A diagnostic standard programme was used. In the second measurement of blood pressure we established 19.8% of patients with hypertension and 28.6% patients with borderline values. 52.8% of the hypertensions were known. Of 10,685 females with known or established hypertension 10.1% underwent an optimum therapy. On the basis of these results a programme for the fight against hypertension was developed for the county Karl-Marx-Stadt.

Karl Marx as a Social Scientist and Utopian Dreamer.

ERIC Educational Resources Information Center

Stevenson, James A.

The central paradox of Karl Marx's work is his belief that the vision of mankind leaving inequality and scarcity behind is attainable. The idea that human alienation, inequality, and need could be rendered obsolete by a future communist society of abundance is a significant failing in Marx's thought. It is at the same time the critical element in…

Marx and Dahrendorf on Income Inequality, Class Consciousness and Class Conflict: An Empirical Test.

ERIC Educational Resources Information Center

Robinson, Robert V.; Kelley, Jonathan

The issue addressed by this paper is the lack of empirical research on the class theories of Karl Marx and Ralf Dahrendorf. In order to bridge this gap, data are analyzed on the theoretical and statistical implications of Marx's theory (which focuses on ownership of the means of production) and Dahrendorf's theory (which focuses on authority in…

An Exploration of Educative "Praxis": Reflections on Marx's Concept "Praxis," Informed by the Lacanian Concepts "Act" and "Event"

ERIC Educational Resources Information Center

Hanley, Chris

2017-01-01

This article explores an aspect of Karl Marx's concept, praxis. Praxis is meaningful work, through which we fulfil ourselves by fulfilling others. The discussion draws on the author's work with postgraduate student teachers, where both students and author were researching their own practice. Reflecting Marx's conception of praxis as subjective…

Evaluation of 25-gauge Quincke and 24-gauge Gertie Marx needles for spinal anaesthesia for caesarean section.

PubMed

Imarengiaye, C O; Edomwonyi, N P

2002-07-01

To compare the insertion characteristics and rate of complications between 25-gauge Quincke and 24-gauge Gertie Marx needles. Prospective, randomized study. University of Benin Teaching Hospital; a university-affiliated tertiary centre. Parturients (ASA 1 and 2) scheduled for elective caesarean section. They were randomly assigned to receive spinal anaesthesia with either 25-gauge Quincke needle or 24-gauge Gertie Marx needle. The patients with abnormal spaces, coagulopathy, infection, pre-eclampsia/eclampsia or obesity were excluded. The number of attempts at successful identification of the spinal space, intraoperative complications, incidence of postdural puncture headache (PDPH), non-postdural puncture headache (NPDPH) and backache. Sixty women were studied. The 24-gauge Gertie Marx needle resulted in more successful location of the spinal space on the second attempt (P<0.05). Non-postdural puncture headache was seen in 43% of the study population. PDPH was seen in 10% of the Quincke group and none in the Gertie Marx group. There was no difference in the incidence of backache in both groups. The ease of insertion and low incidence of PDPH with the Gertie Marx needle may encourage trainee anaesthetists to use this needle for caesarean section.

Impedance matching for repetitive high voltage all-solid-state Marx generator and excimer DBD UV sources

NASA Astrophysics Data System (ADS)

Wang, Yonggang; Tong, Liqing; Liu, Kefu

2017-06-01

The purpose of impedance matching for a Marx generator and DBD lamp is to limit the output current of the Marx generator, provide a large discharge current at ignition, and obtain fast voltage rising/falling edges and large overshoot. In this paper, different impedance matching circuits (series inductor, parallel capacitor, and series inductor combined with parallel capacitor) are analyzed. It demonstrates that a series inductor could limit the Marx current. However, the discharge current is also limited. A parallel capacitor could provide a large discharge current, but the Marx current is also enlarged. A series inductor combined with a parallel capacitor takes full advantage of the inductor and capacitor, and avoids their shortcomings. Therefore, it is a good solution. Experimental results match the theoretical analysis well and show that both the series inductor and parallel capacitor improve the performance of the system. However, the series inductor combined with the parallel capacitor has the best performance. Compared with driving the DBD lamp with a Marx generator directly, an increase of 97.3% in radiant power and an increase of 59.3% in system efficiency are achieved using this matching circuit.

Understanding Soviet Objectives and Behavior,

DTIC Science & Technology

1984-05-17

Soviet claim of the ultimate victory of socialism over capitalism is found in The Commu- nist Manifesto which was written in 1848 by Karl Marx , a...ends can be attained only by the forcible overthrow of all existing 2 aocial conditions. . . They have a world to win. Karl Marx , 1848 socialism...Novosti 1978 Yearbook of the USSR, p. 34. 3. Karl Marx and Friedrich Engels, The Communist Manifesto (Introduction by A. J. P. Taylor), pp. 79, 91, 93-94

Naval War College Review. Volume 61, Number 4, Autumn 2008

DTIC Science & Technology

2008-01-01

Sigmund Freud , to name just two intellectuals who made the mistake of ascrib- ing the ills of the world to a single factor. In the case of Marx, the single...factor was the means of production and distribution. For Freud , it was the great inner tension between the desires of the individual psyche and the...demands of an or- dered society. Like Ms. West, both Marx and Freud pointed to a factor that mat- tered. But also like her, Marx and Freud laid too

Design of a Radiographic Integrated Test Stand (RITS) Based on a Voltage Adder, To Drive a Diode Immersed in a High Magnetic Field

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bailey, V.L.; Corcoran, P.; Droemer, D.

Recent experiments (1) have adapted existing magne-tically insulated induction voltage adders (Sabre, Hermes III) to drive a 10 MV diode immersed in magnetic fields as high as 50 T. In such a diode, an electron beam of tens of kA can be confined by the magnetic field to a diameter of about 1 mm, and when it strikes a high-Z anode it can create a bremsstrahlung x-ray source intense enough to radiograph massive objects with high resolution. RITS is an adder system designed specially to drive such diodes, and it will be used to develop and exploit them. As inmore » other adder-based pulsers such as Sabre, Hermes III, and Kalif-Heliq the induction cells have amorphous- iron cores, and the pulse-forming system consists of water dielectric pulse lines and self-closing water switches that are pulse-charged from Marx-charged intermediate water capacitors through laser-triggered Rimfire switches. An oil prepulse switch in series with each pulse line is designed to reduce cathode prepulse to less than ± 5 kV, and a means is provided to bias the cathode and avoid negative prepulse entirely. The RITS pulse-forming system consists of two modules. Each module has one Marx that charges two 3 MV intermediate stores, each of which charges three 7.8 ohm pulselines, making six pulselines per module. The two modules in concert can supply 1.35 MV, 50 ns pulses to a twelve-cell adder and thus drive a 16 MV diode with a single pulse. The 1.35 MV induction cells each have a single-point feed, from which a single, slotted azimuthal oil transmission line distributes energy uniformly around the cell. The modules can also be pulsed separately at different times, either to power two 8 MV adders that each drive one of two closely-spaced cathodes immersed in a common magnetic field, or to provide two separate pulses to a common six- cell adder and a single 8 NIV diode; in these two-pulse modes, the spacing of the two 50 ns pulses may be chosen to be anything from a few hundred ns upward. The use of only one pulse line per cell has been shown to increase the extent to which the cell voltages can vary with the timing of closure of the water switches. This and all other functions of RITS have been simulated in detail, and a conservative electrical design has been developed. This will be illustrated, along with the conceptual design of a pulse-sorting network that can couple two pulselines efilciently to one cell when the two RITS modules drive a common adder in two-pulse mode.« less

Facial swelling

MedlinePlus

... Marx JA, Hockberger RS, Walls RM, eds. Rosen's Emergency Medicine . 8th ed. Philadelphia, PA: Elsevier Saunders; 2014:chap ... Marx JA, Hockberger RS, Walls RM, eds. Rosen's Emergency Medicine . 8th ed. Philadelphia, PA: Elsevier Saunders; 2014:chap ...

Ignition of a Deuterium Micro-Detonation with a Gigavolt Super Marx Generator

NASA Astrophysics Data System (ADS)

Winterberg, Friedwardt

2009-09-01

The Centurion-Halite experiment demonstrated the feasibility of igniting a deuterium-tritium micro-explosion with an energy of not more than a few megajoule, and the Mike test, the feasibility of a pure deuterium explosion with an energy of more than 106 MJ. In both cases the ignition energy was supplied by a fission bomb explosive. While an energy of a few megajoule, to be released in the time required of less than 10-9 s, can be supplied by lasers and intense particle beams, this is not enough to ignite a pure deuterium explosion. Because the deuterium-tritium reaction depends on the availability of lithium, the non-fission ignition of a pure deuterium fusion reaction would be highly desirable. It is shown that this goal can conceivably be reached with a "Super Marx Generator", where a large number of "ordinary" Marx generators charge (magnetically insulated) fast high voltage capacitors of a second stage Marx generator, called a "Super Marx Generator", ultimately reaching gigavolt potentials with an energy output in excess of 100 MJ. An intense 107 Ampere-GeV proton beam drawn from a "Super Marx Generator" can ignite a deuterium thermonuclear detonation wave in a compressed deuterium cylinder, where the strong magnetic field of the proton beam entraps the charged fusion reaction products inside the cylinder. In solving the stand-off problem, the stiffness of a GeV proton beam permits to place the deuterium target at a comparatively large distance from the wall of a cavity confining the deuterium micro-explosion.

Karl Marx: "A Swarthy Fellow from Trier."

ERIC Educational Resources Information Center

Machalek, Richard

1983-01-01

Discussed are Marx's roles as a student, a journalist-scholar, a revolutionary, and a family member. Revealed is a political and intellectual figure of enormous stature and complexity, but a person typically human in passions and commitments, strengths, and shortcomings. (RM)

Reflections on Antecedents of the Holocaust.

ERIC Educational Resources Information Center

Fritz, Stephen G.

1990-01-01

Examines the influence of Karl Marx's writings on Adolf Hitler, and asks whether there was a causal nexus between Russian and Nazi atrocities. Uses primary sources as a method for historical comparison. Compares Hitler's writings on antisemitism with those of Marx. (NL)

Coaxial-type water load for measuring high voltage, high current and short pulse of a compact Marx system for a high power microwave source

NASA Astrophysics Data System (ADS)

Han, Jaeeun; Kim, Jung-ho; Park, Sang-duck; Yoon, Moohyun; Park, Soo Yong; Choi, Do Won; Shin, Jin Woo; So, Joon Ho

2009-11-01

A coaxial-type water load was used to measure the voltage output from a Marx generator for a high power microwave source. This output had a rise time of 20 ns, a pulse duration of a few hundred ns, and an amplitude up to 500 kV. The design of the coaxial water load showed that it is an ideal resistive divider and can also accurately measure a short pulse. Experiments were performed to test the performance of the Marx generator with the calibrated coaxial water load.

Comparison of the Recently proposed Super Marx Generator Approach to Thermonuclear Ignition with the DT Laser Fusion-Fission Hybrid Concept (LIFE) by the Lawrence Livermore National Laboratory.

NASA Astrophysics Data System (ADS)

Winterberg, Friedwardt

2009-05-01

The recently proposed Super Marx pure deuterium micro-detonation ignition concept [1] is compared to the Lawrence Livermore National Ignition Facility (NIF) laser DT fusion-fission hybrid concept (LIFE) [2]. A typical example of the LIFE concept is a fusion gain 30, and a fission gain of 10, making up for a total gain of 300, with about 10 times more energy released into fission as compared to fusion. This means a substantial release of fission products, as in fusion-less pure fission reactors. In the Super Marx approach for the ignition of a pure deuterium micro-detonation gains of the same magnitude can in theory be reached. If the theoretical prediction can be supported by more elaborate calculations, the Super Marx approach is likely to make lasers obsolete as a means for the ignition of thermonuclear micro-explosions. [1] ``Ignition of a Deuterium Micro-Detonation with a Gigavolt Super Marx Generator,'' Winterberg, F., Journal of Fusion Energy, Springer, 2008. http://www.springerlink.com/content/r2j046177j331241/fulltext.pdf. [2] ``LIFE: Clean Energy from Nuclear Waste,'' https://lasers.llnl.gov/missions/energy&_slash;for&_slash;the&_slash;future/life/

“Coffee Ring Effect” in Ophthalmology

PubMed Central

Rajabi, Mohammad Taher; Sharifzadeh, Morteza

2016-01-01

Abstract The process of formation of Marx line is studied in this article. Various theories have been proposed previously, in order to explain the mechanisms which lead to the development of Marx line. These theories are based on the characteristics of stained area and do not pay attention to the behavior of dye solution itself on the surface. The aim of this study is to investigate the latter behavior and introduce a new theory based on it, in order to explain the process of the Marx line formation. This study also introduces “Coffee Ring Effect” and its possible applications in explaining some ophthalmological phenomena. The effect of dye solution's behavior on the beneath surface is adopted in order to propose a novel theory. This new hypothesis is called “Anionic Dye Deposition” which was based on “Coffee Ring Effect” phenomenon. For evaluation of this theory, Evaporation pattern of Rose Bengal and fluorescein were analyzed on different surfaces. Furthermore, the effect of tear meniscus alteration on lid margin staining is studied. During the evaporation process of dye solutions, it was observed that almost all of the solute was deposited at the edge of the drop on hydrophilic surfaces. Furthermore, in the study of lid margin staining, it is observed that tear meniscus alteration during gaze affects staining pattern. This observation invalidates former hypotheses which only focus on stained surface characteristics. According to the observations in this study, it is proposed that Marx line staining occurs as a result of “anionic dye deposition” due to evaporation. PMID:27057835

A compact bipolar pulse-forming network-Marx generator based on pulse transformers.

PubMed

Zhang, Huibo; Yang, Jianhua; Lin, Jiajin; Yang, Xiao

2013-11-01

A compact bipolar pulse-forming network (PFN)-Marx generator based on pulse transformers is presented in this paper. The high-voltage generator consisted of two sets of pulse transformers, 6 stages of PFNs with ceramic capacitors, a switch unit, and a matched load. The design is characterized by the bipolar pulse charging scheme and the compact structure of the PFN-Marx. The scheme of bipolar charging by pulse transformers increased the withstand voltage of the ceramic capacitors in the PFNs and decreased the number of the gas gap switches. The compact structure of the PFN-Marx was aimed at reducing the parasitic inductance in the generator. When the charging voltage on the PFNs was 35 kV, the matched resistive load of 48 Ω could deliver a high-voltage pulse with an amplitude of 100 kV. The full width at half maximum of the load pulse was 173 ns, and its rise time was less than 15 ns.

Ultra-compact Marx-type high-voltage generator

DOEpatents

Goerz, David A.; Wilson, Michael J.

2000-01-01

An ultra-compact Marx-type high-voltage generator includes individual high-performance components that are closely coupled and integrated into an extremely compact assembly. In one embodiment, a repetitively-switched, ultra-compact Marx generator includes low-profile, annular-shaped, high-voltage, ceramic capacitors with contoured edges and coplanar extended electrodes used for primary energy storage; low-profile, low-inductance, high-voltage, pressurized gas switches with compact gas envelopes suitably designed to be integrated with the annular capacitors; feed-forward, high-voltage, ceramic capacitors attached across successive switch-capacitor-switch stages to couple the necessary energy forward to sufficiently overvoltage the spark gap of the next in-line switch; optimally shaped electrodes and insulator surfaces to reduce electric field stresses in the weakest regions where dissimilar materials meet, and to spread the fields more evenly throughout the dielectric materials, allowing them to operate closer to their intrinsic breakdown levels; and uses manufacturing and assembly methods to integrate the capacitors and switches into stages that can be arranged into a low-profile Marx generator.

Alienating Students: Marxist Theory in Action

ERIC Educational Resources Information Center

Thiele, Megan; Pan, Yung-Yi Dian; Molina, Devin

2016-01-01

Karl Marx's revolutionary call, "Workers of the World Unite," resonates with many in today's society. This article describes and assesses an easily reproducible classroom activity that simulates both alienating, and perhaps more importantly, non-alienating states of production as described by Marx. This hands-on learning activity gives…

The nature and consequence of Karl Marx's skin disease.

PubMed

Shuster, S

2008-01-01

From an analysis of the original correspondence, it has been possible to establish that Karl Marx's incapacitating skin disease was hidradenitis suppurativa, not 'boils' as was universally assumed at the time and since; the psychological effect of this illness on the man and his work appears to have been considerable.

Karl Marx and Group Therapy: An Old Warning about a New Phenomenon.

ERIC Educational Resources Information Center

Cooper, Terry D.

1984-01-01

Uses Marx's classic critique of religion to explore the social function of therapy groups. Investigates the manner in which groups conserve the status quo and argues that the Marxist critique can help promote a more realistic social awareness and a more effective perception of groups. (Author/JAC)

Reconsidering Marx in Post-Marxist Times: A Requiem for Postmodernism?

ERIC Educational Resources Information Center

McLaren, Peter; Farahmandpur, Ramin

2000-01-01

Marx's description of capitalism as a dark force that has become uncontrollable is very apt today, despite the fact that postmodernists have relegated Marxism to the status of failed aspirations. Discusses postmodernism, the postmodern promise, postmodern politics, the new social movements, hybridity and postmodern multiculturalism, postmodern…

The Phantasmagoria of Competition in School Ensembles

ERIC Educational Resources Information Center

Abramo, Joseph Michael

2017-01-01

Participation in competition festivals--where students and ensembles compete against each other for high scores and accolades--is a widespread practice in North American formal music education. In this article, I use Marx's theories of labor, value, and phantasmagoria to suggest a capitalist logic that structures these competitions. Marx's…

The lid wiper and muco-cutaneous junction anatomy of the human eyelid margins: an in vivo confocal and histological study

PubMed Central

Knop, Erich; Knop, Nadja; Zhivov, Andrey; Kraak, Robert; Korb, Donald R; Blackie, Caroline; Greiner, Jack V; Guthoff, Rudolf

2011-01-01

The inner border of the eyelid margin is critically important for ocular surface integrity because it guarantees the thin spread of the tear film. Its exact morphology in the human is still insufficiently known. The histology in serial sections of upper and lower lid margins in whole-mount specimens from 10 human body donors was compared to in vivo confocal microscopy of eight eyes with a Heidelberg retina-tomograph (HRT II) and attached Rostock cornea module. Behind the posterior margin of the Meibomian orifices, the cornified epidermis stopped abruptly and was replaced by a continuous layer of para-keratinized (pk) cells followed by discontinuous pk cells. The pk cells covered the muco-cutaneous junction (MCJ), the surface of which corresponded to the line of Marx (0.2–0.3 mm wide). Then a stratified epithelium with a conjunctival structure of cuboidal cells, some pk cells, and goblet cells formed an epithelial elevation of typically about 100 μm initial thickness (lid wiper). This continued for 0.3–1.5 mm and formed a slope. The MCJ and lid wiper extended all along the lid margin from nasal to temporal positions in the upper and lower lids. Details of the epithelium and connective tissue were also detectable using the Rostock cornea module. The human inner lid border has distinct zones. Due to its location and morphology, the epithelial lip of the lid wiper appears a suitable structure to spread the tear film and is distinct from the MCJ/line of Marx. Better knowledge of the lid margin appears important for understanding dry eye disease and its morphology can be analysed clinically by in vivo confocal microscopy. PMID:21413985

Surveying Graduate Students' Attitudes and Approaches to Problem Solving

ERIC Educational Resources Information Center

Mason, Andrew; Singh, Chandralekha

2010-01-01

Students' attitudes and approaches to problem solving in physics can profoundly influence their motivation to learn and development of expertise. We developed and validated an Attitudes and Approaches to Problem Solving survey by expanding the Attitudes toward Problem Solving survey of Marx and Cummings and administered it to physics graduate…

The Division of Labor, Technology, and Education: Cross-National Evidence

ERIC Educational Resources Information Center

Grandjean, Burke D.

1974-01-01

The author provides data on 29 countries to test the hypothesis of Durkheim, Marx, and Adam Smith that the division of labor and technological development lead to expanded education. The results support the above thesis. (Author/DE)

Karl Marx and the Environment

ERIC Educational Resources Information Center

Shifferd, K. D.

1972-01-01

Implications from Karl Marx's concept of nature are explored. Serving as a frame of reference for the fight against pollution, the Marxian philosophy provides a kind of systems analysis of the origins and dynamics of pollution at the level of society and a set of conceptual tools and attitudes for unmasking the claims of industry. (BL)

Um Olhar sobre "Beleza Americana" (A Look at "American Beauty").

ERIC Educational Resources Information Center

Bissoto, Maria Luisa

2000-01-01

Discusses the film "American Beauty" in light of a reading of Karl Marx. Finds that the film shows the circularity which marks bourgeois society, even though the rhythm of industry and renovation of the society masks it. States that Marx praises the industry, invention, and innovation of the bourgeoisie. (BT)

Marx and Education: Working with the Revolutionary Educator

ERIC Educational Resources Information Center

Banfield, Grant

2015-01-01

This paper positions education as productive work, i.e. radical labour. It argues that education is a deliberate and conscious process directed to the building of human capacities to labour for socialist transformation. In drawing on the intellectual resources left by Marx the objective of education is the production of the "revolutionary…

Investigations of the Interactions of Radiation with Matter.

DTIC Science & Technology

1986-07-31

Process in Atoms, Molecules and Solids, eds. A. Mei-el and J. Finster , (Karl-Marx Universitat, Leipzig, 1984), p. 58. 10. S.T. Manson in High Enery Ion...H. Toburen, and S. T. Manson in X-Ra and Inner-Shell Process in Atoms, Molecules and Solids, eds. A. Meisel and J. Finster , (Karl-Marx- Universitat

Particle in cell simulation of peaking switch for breakdown evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Umbarkar, Sachin B.; Bindu, S.; Mangalvedekar, H.A.

2014-07-01

Marx generator connected to peaking capacitor and peaking switch can generate Ultra-Wideband (UWB) radiation. A new peaking switch is designed for converting the existing nanosecond Marx generator to a UWB source. The paper explains the particle in cell (PIC) simulation for this peaking switch, using MAGIC 3D software. This peaking switch electrode is made up of copper tungsten material and is fixed inside the hermitically sealed derlin material. The switch can withstand a gas pressure up to 13.5 kg/cm{sup 2}. The lower electrode of the switch is connected to the last stage of the Marx generator. Initially Marx generator (withoutmore » peaking stage) in air; gives the output pulse with peak amplitude of 113.75 kV and pulse rise time of 25 ns. Thus, we design a new peaking switch to improve the rise time of output pulse and to pressurize this peaking switch separately (i.e. Marx and peaking switch is at different pressure). The PIC simulation gives the particle charge density, current density, E counter plot, emitted electron current, and particle energy along the axis of gap between electrodes. The charge injection and electric field dependence on ionic dissociation phenomenon are briefly analyzed using this simulation. The model is simulated with different gases (N{sub 2}, H{sub 2}, and Air) under different pressure (2 kg/cm{sup 2}, 5 kg/cm{sup 2}, 10 kg/cm{sup 2}). (author)« less

Collaborative Professional Development and Curriculum Enactment: Teacher Reflection to Inform Inquiry-Based Discussions in High School Science Classrooms

ERIC Educational Resources Information Center

Alozie, Nonyelum M.

2010-01-01

Professional development for practicing science teachers has been a goal in education for the last two decades. Studies have shown that the quality of teacher instruction may be linked to teacher participation and involvement in professional development programs (Fishman, Marx, Best, & Tal, 2003). Furthermore, reflection during professional…

[Territorial differences in the occurrence of caries in Karl Marx Stadt children and adolescent after 12 years of water fluoridation].

PubMed

Künzel, W

1976-01-01

Cariostatistical comparisons made since the start of drinking-water fluoridation in Karl-Marx-Stadt suggested territorial differences in the prevalence of dental decay. In the present paper an attempt is made to analyse the problems involved, with due consideration being given to both demographic and ecological factors.

[Results of school inspections in the county of Karl-Marx-Stadt (author's transl)].

PubMed

Arnold, J

1978-10-01

Within the Health Protection in Childhood and Adolescence Research Project a hygienic inspection questionnaire was designed for schools. To test this questionnaire, 248 schools in 11 districts of the county of Karl-Marx-Stadt were inspected. From the ascertainments made, several instances are cited to point out the priorities of school hygiene.

Pop Culture in the Classroom: "American Idol," Karl Marx, and Alexis de Tocqueville

ERIC Educational Resources Information Center

Centellas, Miguel

2010-01-01

This article discusses the use of pop culture in the classroom as a means to teach foundational political science authors and concepts. I focus on my experience using "American Idol" as a point of reference to discuss Marx and Engel's "The Communist Manifesto" and Tocqueville's "Democracy in America" in undergraduate comparative politics courses.…

The Educator Needs to Be Educated: Reflections on the Political Pedagogy of Marx, Lenin and Habermas

ERIC Educational Resources Information Center

Welton, Michael R.

2014-01-01

This essay examines one of the most intractable pedagogical problems of the Marxian revolutionary tradition: who will educate the educator and how ought the learning process to proceed. The solutions of Marx, Lenin and Habermas are critically examined towards the clarification of the emancipatory learning process. This learning process has three…

Kant or Marx? Philosophy and the Origins of Social Science.

ERIC Educational Resources Information Center

Scaff, Lawrence A.

The origins of social science as a discipline are analyzed in terms of the German scientific community before 1920, which tended to define itself according to the theories of Karl Marx or Immanuel Kant. Following a brief introduction about the nature of social science debates in intellectual Germany, section 2 of the paper considers whether the…

Marx and Foucault: Subjectivity, Employability and the Crisis of Youth Unemployment in the Great Global Recession

ERIC Educational Resources Information Center

Peters, Michael A.; Besley, Tina

2013-01-01

This article explores the different approaches taken to the concepts of work or labour by Marx and Foucault, examining in particular the question of subjectivity in relation to youth unemployment and the current crisis of youth unemployment as part of the aftermath of the global recession of 2008.

[Management of functional sterility using clomiphene and cyclophenyl at the Karl-Marx-Stadt District Hospital Gynecologic Clinic].

PubMed

Neubert, S; Melzer, H

1977-01-01

We report on 39 barren patients suffering from anovulatory cycle disturbances or corpus luteum inadequacies. Them were given treatment in the Gynecological Hospital of Karl-Marx-Stadt County at Karl-Marx-Stadt in the past few years and were administered Clomiphendihydrogencitrate or Cyclophenyl to provoke ovulation. Before and during therapy, the total of estrogenes and pregnanediol were determined in the 24h-urine every two days. The clinical data and the results of the hormone investigations were analysed, and an attempt was made to derive a forecast from the estrogene and pregnanediol secretion so as to be able to form an opinion on the positive or negative result of the treatment.

From Commodity Production to Sign Production: A Triple Triangle Model for Marx's Semiotics and Peirce's Economics.

ERIC Educational Resources Information Center

Kim, Joohoan

Using the viewpoint of semiotics, this paper "re-reads" Karl Marx's labor theory of value and suggests a "triple triangle" model for commodity production and shows how this model could be a model for semiosis in general. The paper argues that there are three advantages to considering homogeneity of the sign production and the…

Max Weber's Contribution to the Sociology of Education: A Critical Appreciation

ERIC Educational Resources Information Center

Rao, S. Srinivasa; Singh, Smriti

2018-01-01

Karl Emil Maximilian Weber (1864-1920), more widely known as Max Weber, is credited with numerous contributions to modern sociology and is considered one of the pillars of the discipline along with Karl Marx and Emile Durkheim. Marx (1818-1883) was an established predecessor from Germany whose study of the nineteenth-century European society was…

Toward a Political Economic Theory of Education: Use and Exchange Values of Enhanced Labor Power

ERIC Educational Resources Information Center

Williams, Julian

2011-01-01

I explore theoretical conceptions of the use and exchange values of mathematics education within cultural-historical activity theory perspectives. The case of education in England is compared with that of health care (due to Engestrom). Then I draw on Lave and McDermott's study of estranged learning from the early Marx, and from Marx's later…

Southeast Asian Space Programs: Motives, Cooperation, and Competition

DTIC Science & Technology

2014-09-01

LEO low Earth orbit MTCR Missile Technology Control Regime NAMRIA National Mapping and Resource Information Authority NASA National Aeronautics and...Technology’s role 27 Leo Marx and Merritt Roe Smith, “Introduction,” in Does Technology Drive History: The...Dilemma of Technological Determinism, ed. Merritt Roe Smith and Leo Marx (Cambridge, MA: The MIT Press, 1994), xii. 28 Donald MacKenzie and Judy

Specificities of Sightseeing Foot Tour Arrangement for History Related Street with Regard to Karl Marx Street in the Town of Irkutsk

NASA Astrophysics Data System (ADS)

Kulakov, A. I.; Shishkanov, V. S.

2017-11-01

The paper is devoted to the preparation of an innovative foot itinerary for tourists in Karl Marx Street in the town of Irkutsk. Methodology on preparation of sightseeing tours has been analysed by the authors. The analysis of the methodology has facilitated selecting the criteria to classify the excursions as well as the criteria for assessing and shortlisting the objects for excursion exposure. Some chosen criteria being used in tour arrangement and certain specificities of tour preparation have been revealed which are characteristic particularly for Karl Marx Street as a history-related one. It is also proved in the paper that the itinerary prepared for tourists is in full correspondence with the key innovation objectives in tourism.

Gas spark switches with increased operating life for Marx generator of lightning test complex

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bykov, Yu. A.; Krastelev, E. G., E-mail: ekrastelev@yandex.ru

A new design of gas spark switches with an increased operating life and stable dynamic characteristics for the Marx generator of the lightning test complex has been developed. The switches are characterized by the following parameters in the mode of operation: voltage up to 80 kV, discharge current up to 50 kA, flowing charge up to 3.5 C/pulse. An increased operating life is achieved by using torus-shaped electrodes with increased working surface area and a trigger electrode in the form of a thick disk with a hole located between them. Low breakdown delay time and high stability of breakdown voltagemore » under dynamic conditions are provided by gas preionization in the spark gap using UV radiation of an additional corona discharge in the axial region.« less

The Latest Developments in the Field of University Teaching Methods: A View from the German Democratic Republic.

ERIC Educational Resources Information Center

Klose-Berger, Annelore; Mohle, Horst

1989-01-01

Several aspects of East German research on university teaching methods, with special reference to Karl Marx University, are discussed: the development of teaching methods as part of the educational sciences field; selected recent research results, and the application of research findings to practice in the training and retraining of university…

Teaching Strategies: Self-Created Children's Literature as a Teaching Strategy--Voices from the College and the Elementary Classroom

ERIC Educational Resources Information Center

Szilagyi, Janka; Zarazinski, Jill

2012-01-01

Researchers have noticed a shift in education, with science and social studies taking a backseat to mathematics and literacy (Marx & Harris, 2006; Rodriguez, 2006). Some school districts are operating on a rotating basis with science instruction--one month on and one month off (Marx & Harris, 2006). A better approach would be to encourage students…

Karl Marx in One Lesson (1818-1883). Series on Public Issues No. 6.

ERIC Educational Resources Information Center

Pejovich, Steve

This booklet, one of a series intended to apply economic principles to major social and political issues of the day, starts from the premise that Marxism is a threat to our way of life and offers a critique of fundamental components of the social movement Marx created. The first of six subsections focuses on sources of influence on Karl Marx…

Developmental Stages in School Computer Use: Neither Marx Nor Piaget.

ERIC Educational Resources Information Center

Lengel, James G.

Karl Marx's theory of stages can be applied to computer use in the schools. The first stage, the P Stage, comprises the entry of the computer into the school. Computer use at this stage is personal and tends to center around one personality. Social studies teachers are seldom among this select few. The second stage of computer use, the D Stage, is…

Discussion of "Computational Electrocardiography: Revisiting Holter ECG Monitoring".

PubMed

Baumgartner, Christian; Caiani, Enrico G; Dickhaus, Hartmut; Kulikowski, Casimir A; Schiecke, Karin; van Bemmel, Jan H; Witte, Herbert

2016-08-05

This article is part of a For-Discussion-Section of Methods of Information in Medicine about the paper "Computational Electrocardiography: Revisiting Holter ECG Monitoring" written by Thomas M. Deserno and Nikolaus Marx. It is introduced by an editorial. This article contains the combined commentaries invited to independently comment on the paper of Deserno and Marx. In subsequent issues the discussion can continue through letters to the editor.

High-voltage pulse generator developed for wide-gap spark chambers

NASA Technical Reports Server (NTRS)

Keller, L. P.; Walschon, E. G.

1968-01-01

Low-inductance, high-capacitance Marx pulse generator provides for minimization of internal inductance and suppression of external electromagnetic radiation. The spark gaps of the generator are enclosed in a pressurized nitrogen atmosphere which allows the charging voltage to be varied by changing the nitrogen pressure.

MARXS: A Modular Software to Ray-trace X-Ray Instrumentation

NASA Astrophysics Data System (ADS)

Günther, Hans Moritz; Frost, Jason; Theriault-Shay, Adam

2017-12-01

To obtain the best possible scientific result, astronomers must understand the properties of the available instrumentation well. This is important both when designing new instruments and when using existing instruments close to the limits of their specified capabilities or beyond. Ray-tracing is a technique for numerical simulations where the path of many light rays is followed through the system to understand how individual system components influence the observed properties, such as the shape of the point-spread-function. In instrument design, such simulations can be used to optimize the performance. For observations with existing instruments, this helps to discern instrumental artefacts from a true signal. Here, we describe MARXS, a new python package designed to simulate X-ray instruments on satellites and sounding rockets. MARXS uses probability tracking of photons and has polarimetric capabilities.

USSR Report, International Affairs.

DTIC Science & Technology

1986-07-18

the overall struggle for the liberation of the working class ( K . Marx, F. Engels, "Sochineniya" [Works], Volume 16, p 11). Today this aspect of...Production and Economic Combine for the manu- facture of robots (Stara Zagora). According to K . Marx, "...cooperation—above all means direct—not...the CEMA Commonwealth], Moscow, 1984, p 66. 7. We should note here that the opinion of the Hungarian economist K . Pechi, who distinguishes the two

Foreign Language Study in Budapest.

ERIC Educational Resources Information Center

Feinberg, Lilian O.; Tarjan, Jeno

1968-01-01

Foreign language study at the Karl Marx University of Economic Sciences in Budapest aims to develop the ability to use the language as a native would in a particular business or profession, and to help the student become fully aware of the political, historical, sociological, and geographical background of the foreign country and the…

[Profile and tasks of a medical university polyclinic in the past and present using as example the Medical Polyclinical Institutes of the Karl Marx University of Leipzig].

PubMed

Hambsch, K; Treutler, H; Pietruschka, W D

1981-03-15

After a short survey of the historical development of the Medico-Policlinical Institute of the Karl Marx University Leipzig tasks and developmental tendencies of university medical policlinics are described, evaluating hereby the results of the Vth conference of higher education. They are understood as a university representation of ambulatorily working internists and to a large extent of the specialists for general medicine. Their main tasks consist in education and continued professional training of this group of physicians under integrative description of the whole subject internal medicine, a research oriented to practice as well as a guiding and coordination function for the ambulatory internistic care, taking into particular consideration the early recognition of a disease, in primary and secondary prevention as well as in a scientifically based ambulatory therapy of epidemiologically important diseases.

[Development of the legal abortion situation at the gynecologic hospital of Karl-Marx-University, Leipzig from 1.1.1960 to 30.6.1972].

PubMed

Schulz, S; Henning, G

1973-07-13

Statistics on legal abortions at the Women's Clinic, Karl Marx University, Leipzig, East Germany, are reported. Between 1960-June 30, 1972, there were 3955 abortions and 53,972 births. Of these, 1368 abortions and 1831 births occurred in 1972; a similar large increase in abortions has been reported from other socialist countries. Average age of patients was 30.6 years in 1960, 27.7 years in 1972. In 1960, 83.1% of patients were married, but only 66.4% in 1972. Average hospital stay was 10.3 days in 1960, 3.7 days in 1972. Complications were seen in 32.5% of cases in 1960, and in 8.3% in 1972. Statistics for each year, 1960-1972, are given, and the implications of this information for medical practice and social policy are discussed.

Annotations to D.B. Herrmann's contribution ``On Albert Einstein's political views'' (German Title: Anmerkungen zu D.B. Herrmanns Beitrag ``Über Albert Einsteins politische Ansichten'')

NASA Astrophysics Data System (ADS)

Grundmann, Siegfried

Referring to the Straus-Herrmann correspondence, we deal only with one aspect of the ``political Einstein'': his attitude towards Marx, Engels, Lenin and Stalin (who were in the past sometimes called the ``classics of Marxism-Leninism''). Einstein revered Marx, but condemned Stalin as a criminal. He also resisted attempts to be misused by representatives of ``dialectic materialism''.

Pulsed Corona Discharge Generated By Marx Generator

NASA Astrophysics Data System (ADS)

Sretenovic, G. B.; Obradovic, B. M.; Kovacevic, V. V.; Kuraica, M. M.; Puric J.

2010-07-01

The pulsed plasma has a significant role in new environmental protection technologies. As a part of a pulsed corona system for pollution control applications, Marx type repetitive pulse generator was constructed and tested in arrangement with wire-plate corona reactor. We performed electrical measurements, and obtained voltage and current signals, and also power and energy delivered per pulse. Ozone formation by streamer plasma in air was chosen to monitor chemical activity of the pulsed corona discharge.

Science and worldviews in the marxist tradition

NASA Astrophysics Data System (ADS)

Skordoulis, C. D.

2008-06-01

This paper is about the relationship between Marxism, Science and Worldviews. In Section I, the paper gives a descriptive definition of the scientific viewpoint based on a materialist ontology, a realist epistemology, and the recognition that science is a social activity. The paper shows in Section II that there are currents in contemporary Marxism which relate favourably to science. In Section III, the paper examines Marx's encounter with Natural Philosophy and Materialism by analysing the influence of Epicurus on Marx. Section IV examines Marx's positive attitude towards natural science. Section V discusses the relation between science and ideology and proposes a scheme to defend the thesis that science establishes a conceptual autonomy from the forms of social consciousness existing in the social formation. Finally Section VI examines the historical infusion of Marxism into the Western scientific community in the 1930s, and the positions adopted by Marxists when they have considered science education.

Coupled gating of skeletal muscle ryanodine receptors is modulated by Ca2+, Mg2+, and ATP

PubMed Central

Porta, Maura; Diaz-Sylvester, Paula L.; Neumann, Jake T.; Escobar, Ariel L.; Fleischer, Sidney

2012-01-01

Coupled gating (synchronous openings and closures) of groups of skeletal muscle ryanodine receptors (RyR1), which mimics RyR1-mediated Ca2+ release underlying Ca2+ sparks, was first described by Marx et al. (Marx SO, Ondrias K, Marks AR. Science 281: 818–821, 1998). The nature of the RyR1-RyR1 interactions for coupled gating still needs to be characterized. Consequently, we defined planar lipid bilayer conditions where ∼25% of multichannel reconstitutions contain mixtures of coupled and independently gating RyR1. In ∼10% of the cases, all RyRs (2–10 channels; most frequently 3–4) gated in coupled fashion, allowing for quantification. Our results indicated that coupling required cytosolic solutions containing ATP/Mg2+ and high (50 mM) luminal Ca2+ (Calum) or Sr2+ solutions. Bursts of coupled activity (events) started and ended abruptly, with all channels activating/deactivating within ∼300 μs. Coupled RyR1 were heterogeneous, where highly active RyR1 (“drivers”) seemed open during the entire coupled event (Po = 1), while other RyR1s (“followers”) displayed abundant flickering and smaller amplitude. Drivers mean open time increased with cytosolic Ca2+ (Cacyt) or caffeine, whereas followers flicker frequency was Cacyt independent and more sensitive to inhibition by cytosolic Mg2+. Coupled events were insensitive to varying lumen-to-cytosol Ca2+ fluxes from ∼1 to 8 pA, which does not corroborate coupling of neighboring RyR1 by local Ca2+-induced Ca2+ release. However, coupling requires specific Calum sites, as it was lost when Calum was replaced by luminal Ba2+ or Mg2+. In summary, coupled events reveal complex interactions among heterogeneous RyR1, differentially modulated by cytosolic ATP/Mg2+, Cacyt, and Calum, which under cell-like ionic conditions may parallel synchronous RyR1 gating during Ca2+ sparks. PMID:22785120

Searching for the Marxist in Boal.

ERIC Educational Resources Information Center

O'Sullivan, Carmel

2001-01-01

Examines Augusto Boal's relationship to and understanding of Marxism, and its influence on the development of his work. Explains that Boal's reformist politics as reflected in his practice would therefore appear a negation of socialism as Marx conceived it. Concludes Boal's approach appears to encourage people to look for that insight in terms of…

Markets, Marx, Modernity and Mathematics Education: A Response to Michael Apple.

ERIC Educational Resources Information Center

Gates, Peter

This paper is a response to Michael Apple's paper, "What Postmodernists Forget: Cultural Capital and Official Knowledge." The paper advocates Michael's identification of the current dangers and processes of the growth of new right ideologies in the development of subjectivity, society, and education. The differences in success in the education…

Karl Marx vs. Adam Smith Revisited

ERIC Educational Resources Information Center

Manton, Edgar J.; English, Donald E.; Flanagan, Jennifer; Dubey, Anvit

2013-01-01

The purpose of this study was to determine whether the ability of freshman college students to identify the founding fathers of free enterprise and of communism has improved. This study is a follow-up to four previous studies. A questionnaire was developed and distributed to College of Business and College of Education & Human Services…

USSR Report, Translations from Kommunist, No. 5, March 1983

DTIC Science & Technology

1983-06-14

such as Say, Ricardo, Mill and Malthus, whose theories he began to study at that time. Marx began systematic work on problems of political economy...ones. Boisguillebert was one of the founders of the labor theory of value. He believed that the appearance of money distorted the true nature of...34 The attention Marx paid to this problem confirms his interest in the theory of value. He set a high value to Boisguillebert’s contribution to the

Instantly Basing Locust Swarms: New Options for Future Air Operations

DTIC Science & Technology

2012-06-01

force’s fighting potential.”51 Moreover, JP 3-0 specifically emphasizes “Securing and protecting forces, bases, JSAs [Joint Storage Areas], and LOCs ...Smith and Leo Marx (Cambridge, MA: The MIT Press, 1994), 101-113. 64 Hughes, “Technological Momentum,”108. 65 John Law, "Technology and Heterogeneous...Technology Drive History?, edited by Merritt Roe Smith and Leo Marx, 101-113. Cambridge, MA: The MIT Press, 1994. Jean, Grace V. "Remotely Piloted

Charger 1: A New Facility for Z-Pinch Research

NASA Technical Reports Server (NTRS)

Taylor, Brian; Cassibry, Jason; Cortez, Ross; Doughty, Glen; Adams, Robert; DeCicco, Anthony

2017-01-01

Charger 1 is a multipurpose pulsed power laboratory located on Redstone Arsenal, with a focus on fusion propulsion relevant experiments involving testing z-pinch diodes, pulsed magnetic nozzle and other related physics experiments. UAH and its team of pulsed power researchers are investigating ways to increase and optimize fusion production from Charger 1. Currently the team has reached high-power testing. Due to the unique safety issues related to high power operations the UAH/MSFC team has slowed repair efforts to develop safety and operations protocols. The facility is expected to be operational by the time DZP 2017 convenes. Charger 1 began life as the Decade Module 2, an experimental prototype built to prove the Decade Quad pinch configuration. The system was donated to UAH by the Defense Threat Reduction Agency (DRTA) in 2012. For the past 5 years a UAH/MSFC/Boeing team has worked to refurbish, assemble and test the system. With completion of high power testing in summer 2017 Charger 1 will become operational for experimentation. Charger 1 utilizes a Marx Bank of 72 100-kV capacitors that are charged in parallel and discharged in series. The Marx output is compressed to a pulse width of approximately 200 ns via a pulse forming network of 32 coaxial stainless steel tubes using water as a dielectric. After pulse compression a set of SF6 switches are triggered, allowing the wave front to propagate through the output line to the load. Charger 1 is capable of storing 572-kJ of energy and time compressing discharge to less than 250 ns discharge time producing a discharge of about 1 TW of discharge with 1 MV and 1 MA peak voltage and current, respectively. This capability will be used to study energy yield scaling and physics from solid density target as applied to advanced propulsion research.

Population Analysis: A Methodology for Understanding Populations in COIN Environments

DTIC Science & Technology

2008-12-01

Psychology is also known for its controversy. Theories such as those of Sigmund Freud and Abraham Maslow remain controversial, and have clouded the...from the Freud’s concept of the id and ego to Marx concept of class struggles ( Freud , 1923) (Marx, 1847). For the purpose of this thesis, we have...8217The bases of social power,’ in D. Cartwright (ed.) Studies in Social Power. Ann Arbor. Freud , S. (1923). The Ego and the Id, Joan Riviere (trans

PeoplePersonality: Chris Clarke - a physicist who studies ice cream Teaching Anecdotes: Annie Jump Cannon Obituary: György Marx 1927-2002 Starting Out: What Katie did next: part 3 Opinions: What is really important?

NASA Astrophysics Data System (ADS)

2003-03-01

Featuring relationships, personalities, interactions, environments and reputations involved in physics and education PERSONALITY (156) Chris Clarke - a physicist who studies ice cream TEACHING ANECDOTES (157) Annie Jump Cannon OBITUARY (158) György Marx 1927-2002 Steven Chapman STARTING OUT (159) What Katie did next: part 3 Katie Pennicott OPINIONS (160) What is really important? Kerry Parker

Project VALOR: Trajectories of Change in PTSD in Combat-Exposed Veterans

DTIC Science & Technology

2017-10-01

Implications for ICD–11. Journal Of Abnormal Psychology , 126(3), 355- 366. doi:10.1037/abn0000252 PRESENTATIONS Black, S.K., Harwell, A.M., Klein, A.B...mental health in a nationally representative sample of U.S. OEF/OIF veterans. Journal of Abnormal Psychology , 120, 797– 806. http://dx .doi.org...Marx, 150 South Huntington Avenue (116B-3), Boston, MA 02130. E-mail: Karen.Mitchell5@va.gov or Brian.Marx@va.gov Journal of Abnormal Psychology In

Project VALOR: Trajectories of Change in PTSD in Combat Exposed Veterans

DTIC Science & Technology

2016-10-01

comparison of DSM-5 and ICD-11. Poster to be presented at the Association for Behavioral and Cognitive Therapy 50th Annual Meeting. New York, NY. Black, S...Behavioral and Cognitive Therapies 49th Annual Meeting. Chicago, IL. Black, S. K., Erb, S. Bovin, M. J., Green, J., Marx, B. P., Rosen, R. C., & Keane, T...for Behavioral and Cognitive Therapies 49th Annual Meeting. Chicago, IL. Erb, S., Kearns, J., Bovin, M. J., Black, S., Annunziata, A., & Marx, B. P

The East German Research Landscape in Transition Part A: Status and Transition

DTIC Science & Technology

1993-03-02

traditional Meteorologisches Observatorium Potsdam, and Prof. Siegfried Marx of the Karl - Schwarzschild -Observatorium Tautenburg. G804L32-00-01 07 APR...Telefax: +37 (091) 53409 or 51959 The Ministry is on Breiter Weg (the former Karl -Marx StraBe) north of Wilhelm Pieck Allee, near Alter Markt. Non...27 69 Karl StraBe 4 D/W-6900 Heidelberg Telephone: +49 (6221) 54-3265 Telefax: +49 (6221) 54-3355 Akademie der Wissenschaften und der Literatur Mainz

Educating from Marx: Race, Gender, and Learning. Marxism and Education

ERIC Educational Resources Information Center

Mojab, Shahrzad; Carpenter, Sara

2011-01-01

In recent years adult educators have been working to develop an important body of literature on neo-liberalism, capitalism, and imperialism. Many of these analyses draw on various strands of Marxist theorizing. With the exception of Jane Thompson's work as an early socialist feminist, a Marxist-Feminist framework has yet to be articulated for…

Challenges and Opportunities: Using a Science-Based Video Game in Secondary School Settings

ERIC Educational Resources Information Center

Muehrer, Rachel; Jenson, Jennifer; Friedberg, Jeremy; Husain, Nicole

2012-01-01

Simulations and games are not new artifacts to the study of science in secondary school settings (Hug, Kriajcik and Marx 2005), however teachers remain skeptical as to their value, use and appropriateness (Rice 2006). The difficulty is not only the design and development of effective play environments that produce measurable changes in knowledge…

Discourse, Complexity, Normativity: Tracing the Elaboration of Foucault's Materialist Concept of Discourse

ERIC Educational Resources Information Center

Olssen, Mark

2014-01-01

In this article, I want to suggest that it is through the elaboration of the concept of discourse that the differences between Foucault and thinkers like Habermas, Hegel and Marx can best be understood. Foucault progressively develops a conception of discourse as a purely historical category that resists all reference to transcendental principles…

Tree decay an expanded concept

Treesearch

Alex L. Shigo

1979-01-01

This publication is the final one in a series on tree decay developed in cooperation with Harold G. Marx, Research Application Staff Assistant, U.S. Department of Agriculture, Forest Service, Washington, D.C. The purpose of this publication is to clarify further the tree decay concept that expands the classical concept to include the orderly response of the tree to...

Study on Decomposition of Indoor Air Contaminants by Pulsed Atmospheric Microplasma

PubMed Central

Shimizu, Kazuo; Kuwabara, Tomoya; Blajan, Marius

2012-01-01

Decomposition of formaldehyde (HCHO) by a microplasma reactor in order to improve Indoor Air Quality (IAQ) was achieved. HCHO was removed from air using one pass through reactor treatment (5 L/min). From an initial concentration of HCHO of 0.7 ppm about 96% was removed in one pass treatment using a discharge power of 0.3 W provided by a high voltage amplifier and a Marx Generator with MOSFET switches as pulsed power supplies. Moreover microplasma driven by the Marx Generator did not generate NOx as detected by a chemiluminescence NOx analyzer. In the case of large volume treatment the removal ratio of HCHO (initial concentration: 0.5 ppm) after 60 minutes was 51% at 1.2 kV when using HV amplifier considering also a 41% natural decay ratio of HCHO. The removal ratio was 54% at 1.2 kV when a Marx Generator energized the electrodes with a 44% natural decay ratio after 60 minutes of treatment. PMID:23202173

Conducted noise analysis and protection of 45 kJ/s, ±50 kV capacitor charging power supply when interfaced with repetitive Marx based pulse power system.

PubMed

Naresh, P; Patel, Ankur; Sharma, Archana

2015-09-01

Pulse power systems with highly dynamic loads like klystron, backward wave oscillator (BWO), and magnetron generate highly dynamic noise. This noise leads to frequent failure of controlled switches in the inverter stage of charging power supply. Designing a reliable and compatible power supply for pulse power applications is always a tricky job when charging rate is in multiples of 10 kJ/s. A ±50 kV and 45 kJ/s capacitor charging power supply based on 4th order LCLC resonant topology has been developed for a 10 Hz repetitive Marx based system. Conditions for load independent constant current and zero current switching (ZCS) are derived mathematically. Noise generated at load end due to dynamic load is tackled effectively and reduction in magnitude noise voltage is achieved by providing shielding between primary and secondary of high voltage high frequency transformer and with LCLC low pass filter. Shielding scales down the ratio between coupling capacitance (Cc) and the collector-emitter capacitance of insulated gate bi-polar transistor switch, which in turn reduces the common mode noise voltage magnitude. The proposed 4th order LCLC resonant network acts as a low pass filter for differential mode noise in the reverse direction (from load to source). Power supply has been tested repeatedly with 5 Hz repetition rate with repetitive Marx based system connected with BWO load working fine without failure of single switch in the inverter stage.

Conducted noise analysis and protection of 45 kJ/s, ±50 kV capacitor charging power supply when interfaced with repetitive Marx based pulse power system

NASA Astrophysics Data System (ADS)

Naresh, P.; Patel, Ankur; Sharma, Archana

2015-09-01

Pulse power systems with highly dynamic loads like klystron, backward wave oscillator (BWO), and magnetron generate highly dynamic noise. This noise leads to frequent failure of controlled switches in the inverter stage of charging power supply. Designing a reliable and compatible power supply for pulse power applications is always a tricky job when charging rate is in multiples of 10 kJ/s. A ±50 kV and 45 kJ/s capacitor charging power supply based on 4th order LCLC resonant topology has been developed for a 10 Hz repetitive Marx based system. Conditions for load independent constant current and zero current switching (ZCS) are derived mathematically. Noise generated at load end due to dynamic load is tackled effectively and reduction in magnitude noise voltage is achieved by providing shielding between primary and secondary of high voltage high frequency transformer and with LCLC low pass filter. Shielding scales down the ratio between coupling capacitance (Cc) and the collector-emitter capacitance of insulated gate bi-polar transistor switch, which in turn reduces the common mode noise voltage magnitude. The proposed 4th order LCLC resonant network acts as a low pass filter for differential mode noise in the reverse direction (from load to source). Power supply has been tested repeatedly with 5 Hz repetition rate with repetitive Marx based system connected with BWO load working fine without failure of single switch in the inverter stage.

Dose Analysis of the Model 112A Pulserad Pulsed X-Ray Generator by Its Cyltran

DTIC Science & Technology

1989-12-01

field was performed by R. B. Pietruszka [Ref. 1] using the dosimetry system which consists of Thermoluminescent Dosimeter ( TLD ) and associated TLD ...has the same pattern at a specific angle of the dominant electron flow. For a Marx charge of 75 kV, Figure 18 shows the absorbed dose in TLD normalized... Electron energy (1.66 MeV to 0.05 MeV) 3 materials 56 minutes 45 minutes (Ta, Al, TLD ) 68 APPENDIX F. MEASURED EXPOSURE VARIATION Marx Charge 75 kV

What can alienation theory contribute to an understanding of social inequalities in health?

PubMed

Crinson, Iain; Yuill, Chris

2008-01-01

This article examines both the contribution and the limitations of research that has sought to develop a causal understanding of the psychosocial dimension of inequalities in health. The article seeks to revive interest in Marx's theory of alienation in developing the case for an alternative materialist conceptualization that is able to postulate the pathways from alienation as a psychosocial generative structure to social inequalities in health outcomes within late modern societies.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adachi, T.; The Graduate University for Advanced Studies, Hayama, Miura, Kanagawa 240-0193; Arai, T.

A new type of pulse chopper called an Einzel lens chopper is described. An Einzel lens placed immediately after an electron cyclotron resonance ion source is driven by high-voltage pulses generated by a newly developed solid-state Marx generator. A rectangular negative barrier pulse-voltage is controlled in time, and the barrier pulse is turned on only when a beam pulse is required. The results of successful experiments are reported herein.

Contributions to a Marxist Critical Pedagogy of Becoming: Centering the Critique of the Gotha Programme: Part Two

ERIC Educational Resources Information Center

Malott, Curry; Ford, Derek R.

2015-01-01

Part two: This article is the second part of a project concerned with developing a Marxist critical pedagogy that moves beyond a critique of capital and toward a communist future. The article performs an educational reading of Marx's Critique of the Gotha Programme in order to delineate what a Marxist critical pedagogy of becoming communist might…

All the Missiles Work Technological Dislocations and Military Innovation: A Case Study in US Air Force Air-to-Air Armament, Post-World War II through Operation Rolling Thunder

DTIC Science & Technology

2010-06-01

Scientific Way of Warfare, 136. Bousquet also cited Paul Edwards‘ critique of Westmoreland‘s speech: it ―epitomizes the ‗vision of a closed world, a chaotic...Technology Drive History? The Dilemma of Technological Determinism, eds. Merritt Roe Smith and Leo Marx (Cambridge, MA: The MIT Press, 1994), ―The belief...Books, 1990), 29. 68 Quoted in Merritt Roe Smith, ―Introduction,‖ in Does Technology Drive History, 29. 69 Merritt Roe Smith and Leo Marx

High-durability surface-discharge flash x-ray tube driven by a two-stage Marx pulser

NASA Astrophysics Data System (ADS)

Shikoda, Arimitsu; Sato, Eiichi; Kimura, Shingo; Oizumi, Teiji; Tamakawa, Yoshiharu; Yanagisawa, Toru

1993-02-01

We developed a high-durability flash x-ray tube with a plate-shaped ferrite cathode for the use in the field of biomedical engineering and technology. The surface-discharge cathode was very useful for generating stable flash x rays. This flash x-ray generator consisted of the following essential components: a high-voltage power supply, an energy-storage condenser of 97 nF, a two-stage Marx type pulser, an oil diffusion pump, and a flash x-ray tube. This x-ray tube was of a diode which was connected to the turbo molecular pump and had plate-shaped anode and cathode electrodes. The cathode electrode was made of ferrite, and its edge was covered with a thin gold film by means of the spattering in order to decrease contact resistance. The space between the anode and cathode electrodes could be regulated from the outside of the x-ray rube. The two condensers in Marx circuit were charged from 50 to 70 kV by a power supply, and the condensers were connected in series after closing a gap switch. Thus the maximum output voltages from the pulser were about two times the charged voltages. In this experiment, the maximum tube voltage and the current were about 110 kV and 0.8 kA, respectively. The pulse widths were less than 140 ns, and the maximum x-ray intensity was 1.27 (mu) C/kg at 0.5 m per pulse. The size of the focal spot and the maximum repetition rate were about 2 X 2.5 mm and 50 Hz (fps), respectively.

Engendering development theory from the standpoint of women.

PubMed

Currie, D H; Wickramasinghe, A

1997-01-01

Although the field of "women and development" emerged as an aftermath of the UN Decade for Women, development planners have treated gender and development as interrelated but analytically distinct by simply tacking the category "women" onto established frameworks or considering women the social "contexts" of development projects. This paper challenges this tendency with a consideration of how the global process of development is conditioned by and constitutive of gender roles and relations in specific cultural contexts. The paper presents a framework for a distinctly feminist political economy of development that moves development theory from its present impasse caused by challenges to the Marxism that has dominated critical development theory. This post-impasse framework poses Marx's theory of exploitation against the experiences of women garment workers in Free Trade Zones in Sri Lanka to illustrate how industrial development through free market channels is necessarily, not merely coincidentally, gendered. Therefore, the framework reveals the importance of engendering development theory itself. The paper opens with an introduction and continues with an exploration of the current theoretical impasse and post-impasse theory. The paper continues with a discussion of standpoint epistemology as the basis for women-centered research, a description of the research on the impact of factory employment on women from rural villages, a consideration of women's proletarianization in terms of the rise of the "new world order," a feminist reading of Marx's theory of exploitation from the standpoint of the garment workers, and an acknowledgement of the challenge posed by this application of standpoint methodology to the study of development to the current rejection by some Western feminists of universalizing categories such as "gender" and "women."

Lev Semenovich Vygotsky (1896-1924): an introduction to the historico-cultural psychology and the development of the higher psychological processes.

PubMed

Derouesné, Christian

2017-09-01

In the 1930's LS Vygotsky developed an original conception of the psychology and the development of the higher psychological processes, which stands up the current theories in Russia and the West. He layed the bases for the study of the higher mental processes and their relationship with the brain functioning, which will be later on developped by AR Luria. After a brief historical notice, this paper will specify the relationships between Vygoski and Marx's and Engels's philosophy, the Soviet power and the works of Freud and Piaget.

[Development and status of intensive care medicine in internal medicine at the Karl Marx University in Leipzig].

PubMed

Engelmann, L; Schneider, D

1989-01-15

Issuing from the accomplishments of Köhler for the development of the intensive medicine in internal medicine-in 1964 he performed the first long-term respiration at the then Medical Clinic of the Karl Marx University, in 1969 he institutionalized the young subdiscipline at the clinic, in 1978 he founded the department for intensive medicine and is at work by his decisions concerning the development of young scientists, by the handbook "Intensive Medicine. Internal Medicine and Adjacent Subjects" as well as a member of the presidium of the GDR Society for Internal Medicine for the development of the internal intensive medicine-a description of the development of the department, its achievements and problems is given. The promotion of the intensive medicine by Köhler results, as we think, also from the comprehension that it has the duty to perform a function integrating the subdisciplines, which the modern internal medicine oriented to organs and systems threatens to lose, which, however, makes its self-apprehension, which the patient wishes and the teaching is demanding. From this and from the charge for a highly specialized care of patients who life-threateningly fell ill with internal diseases as well as from the duty to create a scientific forerunning results the stringent necessity of the development of the non-operative, in reality internal intensive medicine in the clinics for internal medicine of the county hospitals and university institutions as well as the greater identification of the internist with the subdiscipline in the district hospitals dealing with multidisciplinary intensive medicine.

The new productivity challenge.

PubMed

Drucker, P F

1991-01-01

"The single greatest challenge facing managers in the developed countries of the world is to raise the productivity of knowledge and service workers," writes Peter F. Drucker in "The New Productivity Challenge." Productivity, says Drucker, ultimately defeated Karl Marx; it gave common laborers the chance to earn the wages of skilled workers. Now five distinct steps will raise the productivity of knowledge and service workers--and not only stimulate new economic growth but also defuse rising social tensions.

[RyR-bound FKBP12.6 and the modulation].

PubMed

Yano, M; Matsuzaki, M

2001-06-01

In the pathogenesis of cardiac dysfunction in heart failure, a decrease in the activity of the sarcoplasmic reticulum (SR) Ca(2+) -ATPase is believed to be a major determinant. Recently, a novel mechanism of cardiac dysfunction in heart failure has been reported on the basis of the following findings:1) PKA hyperphosphorylation of RyR causes a dissociation of FKBP12.6 from RyR, resulting in the abnormal single-channel properties (increased Ca(2+) sensitivity for activation and elevated channel activity associated with destabilization of RyR (Marx et al, Cell 101:365, 2000), 2) a prominent abnormal Ca(2+) leak occurs through RyR, following a partial loss of RyR-bound FKBP12.6 and the resultant conformational change in RyR (Yano M et al, Circulation 102:2131, 2000). This abnormal Ca(2+) leak might possibly cause Ca(2+) overload and consequent diastolic dysfunction, as well as systolic dysfunction.

[Tumors of the 4th ventricle and the craniospinal transitional zone. Review of patients of the Neurosurgical Clinic of the Department of Medicine of the Karl Marx University].

PubMed

Niebeling, H G; Fried, H; Goldhahn, W E; Skrzypczak, J; Brachmann, J; Eichler, I

1983-01-01

From a total of 1,028 infratentorial tumours operated on at the Neurosurgical Hospital of the Section Medicine of the Karl-Marx University Leipzig in the last 30 years, 167 tumours in the region of the 4th ventrical have been selected. Their statistical processing was carried out with respect to specific localisation, average age, kind of tumour, sex, clinical findings, duration of case history, application of instrumental diagnostic procedures and radicality of operation, success and failure. Some fundamental conclussions are drawn. A subdivision in detail will be contained in the following articles based on this material.

Optimality of profit-including prices under ideal planning.

PubMed

Samuelson, P A

1973-07-01

Although prices calculated by a constant percentage markup on all costs (nonlabor as well as direct-labor) are usually admitted to be more realistic for a competitive capitalistic model, the view is often expressed that, for optimal planning purposes, the "values" model of Marx's Capital, Volume I, is to be preferred. It is shown here that an optimal-control model that maximizes discounted social utility of consumption per capita and that ultimately approaches a steady state must ultimately have optimal pricing that involves equal rates of steady-state profit in all industries; and such optimal pricing will necessarily deviate from Marx's model of equal rates of surplus value (markups on direct-labor only) in all industries.

Optimality of Profit-Including Prices Under Ideal Planning

PubMed Central

Samuelson, Paul A.

1973-01-01

Although prices calculated by a constant percentage markup on all costs (nonlabor as well as direct-labor) are usually admitted to be more realistic for a competitive capitalistic model, the view is often expressed that, for optimal planning purposes, the “values” model of Marx's Capital, Volume I, is to be preferred. It is shown here that an optimal-control model that maximizes discounted social utility of consumption per capita and that ultimately approaches a steady state must ultimately have optimal pricing that involves equal rates of steady-state profit in all industries; and such optimal pricing will necessarily deviate from Marx's model of equal rates of surplus value (markups on direct-labor only) in all industries. PMID:16592102

The association between MR T1ρ and T2 of cartilage and patient-reported outcomes after ACL injury and reconstruction.

PubMed

Su, F; Pedoia, V; Teng, H-L; Kretzschmar, M; Lau, B C; McCulloch, C E; Link, T M; Ma, C B; Li, X

2016-07-01

To determine if cartilage T1ρ and T2 relaxation time measures after ACL injury and prior to reconstruction (baseline) are associated with patient-reported outcomes at baseline, 6-months, and 1-year after surgery. Fifty-four ACL-injured participants were scanned in both knees at baseline using 3T MR T1ρ and T2 mapping. Participants also completed Knee-injury and Osteoarthritis Outcome Score (KOOS) and Marx activity level questionnaires at baseline, 6-months, and 1-year after reconstruction. The difference between cartilage T1ρ or T2 of the injured and contralateral knee (side-to-side difference, SSD) was calculated to account for physiological variations among patients. Linear regression models were built to evaluate the association between the baseline SSD T1ρ or T2 and KOOS or Marx at all time points. Higher baseline SSD T1ρ posterolateral tibia (pLT) was associated with worse KOOS in all subscales except symptoms at baseline, worse KOOS pain at 6-months, and worse KOOS in all subscales except sports function at 1-year. Higher baseline SSD T2 femoral trochlea (TrF) was associated with worse KOOS activities of daily living (ADL) at 1-year. Higher baseline SSD T1ρ pLT was associated with lower Marx activity level at 1-year. More severe cartilage lesions, as assessed by Whole-Organ MRI Scoring (WORMS), was significantly associated with worse KOOS pain at 6-months and 1-year. T1ρ and T2 of cartilage after ACL injury were associated with KOOS after injury and both KOOS and Marx after reconstruction. Such associations may help clinicians stratify outcomes post-injury, and thus, improve patient management. Copyright © 2016 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Linear Transformer Drivers for Z-pinch Based Propulsion

NASA Technical Reports Server (NTRS)

Adams, Robert; Seidler, William; Giddens, Patrick; Fabisinski, Leo; Cassibry, Jason

2017-01-01

The MSFC/UAH team has been developing of a novel power management and distribution system called a Linear Transformer Driver (LTD). LTD's hold the promise of dramatically reducing the required mass to drive a z-pinch by replacing the capacitor banks which constitute half the mass of the entire system. The MSFC?UAH tea, is developing this technology in hope of integrating it with the Pulsed Fission Fusion (PuFF) propulsion concept. High-Voltage pulsed power systems used for Z-Pinch experimentation have in the past largely been based on Marx Generators. Marx generators deliver the voltage and current required for the Z-Pinch, but suffer from two significant drawbacks when applied to a flight system: they are very massive, consisting of high-voltage capacitor banks insulated in oil-filled tanks and they do not lend themselves to rapid pulsing. The overall goal of Phase 2 is to demonstrate the construction of a higher voltage stack from a number of cavities each of the design proven in Phase 1 and to characterize and understand the techniques for designing the stack. The overall goal of Phase 3 is to demonstrate the feasibility of constructing a higher energy cavity from a number of smaller LTD stacks, to characterize and understand the way in which the constituent stacks combine, and to extend this demonstration LTD to serve as the basis for a 64 kJ pulse generator for Z-Pinch experiments.

Fainting

MedlinePlus

... Syncope. In: Marx JA, Hockberger RS, Walls RM, et al, eds. Rosen's Emergency Medicine: Concepts and Clinical Practice ... by: Laura J. Martin, MD, MPH, ABIM Board Certified in Internal Medicine ...

A Chip in the Curtain: Computer Technology in the Soviet Union

DTIC Science & Technology

1989-03-01

authority of the tsar. British historian Lionel Kochan recounted some of the rather complicated story of religion and the tsars: The Church, because of... pseudosciences " and their study was forbidden. Stalin’s policy delayed the development of a scientific and academic foundation for the study of the computer in...leaders, the doctrine of Marx and Lenin is a matter of faith comparable to a religion in Western terms. When the General Secretary of the Soviet Union

Norpramin overdose

MedlinePlus

Antidepressant overdose; Desipramine overdose ... Levine M, Ruha A-M. Antidepressants. In: Marx JA, Hockberger RS, Walls RM, et al, eds. Rosen's Emergency Medicine: Concepts and Clinical Practice . 8th ed. Philadelphia, PA: ...

Phlegmasia cerulea dolens

MedlinePlus

Deep vein thrombosis - Phlegmasia cerulea dolens; DVT - Phlegmasia cerulea dolens; Phlegmasia alba dolens ... 2016:chap 81. Kline JA. Pulmonary embolism and deep vein thrombosis. In: Marx JA, Hockberger RS, Walls RM, eds. ...

Paraffin poisoning

MedlinePlus

Gummin DD. Hydrocarbons. In: Adams JG, ed. Emergency Medicine . 2nd ed. Philadelphia, PA: Elsevier Saunders; 2013:chap 152. Kulig K. General approach to the poisoned patient. In: Marx JA, Hockberger RS, Walls ...

Subcutaneous emphysema

MedlinePlus

... PA: Elsevier Saunders; 2016:chap 84. Eckstein M, Henderson SO. Thoracic trauma. In: Marx JA, Hockberger RS, ... by: Jacob L. Heller, MD, MHA, Emergency Medicine, Virginia Mason Medical Center, Seattle, WA. Also reviewed by ...

Septicemia

MedlinePlus

Blood poisoning; Bacteremia with sepsis ... Shapiro NI, Zimmer GD, Barkin AZ. Sepsis syndromes. In: Marx, JA, Hockberger RS, Walls RM, et al, eds. Rosen's Emergency Medicine: Concepts and Clinical Practice . 8th ed. Philadelphia, PA: ...

Rhetorical Constructions: Dialogue and Commitment.

ERIC Educational Resources Information Center

Knoblauch, C. H.

1988-01-01

Reviews Paulo Freire's concept of "praxis." Discusses ontological (Aristotle), objectivist (Descartes, Locke), expressionist (Kant), and sociological or "dialogical" (Marx) statements, and explains their potential application to the teaching of rhetoric. (JK)

Gunshot wounds -- aftercare

MedlinePlus

... wound References Simon BC, Hern HG. Wound management principles. In: Marx JA, Hockberger RS, Walls RM, et ... member of Hi-Ethics and subscribes to the principles of the Health on the Net Foundation (www. ...

Vomiting blood

MedlinePlus

... in the vomit References Goralnick E, Meguerdichian DA. Gastrointestinal bleeding. In: Marx JA, Hockberger RS, Walls RM, et ... Saunders; 2016:chap 135. Savides TJ, Jensen DM. Gastrointestinal bleeding. In: Feldman M, Friedman LS, Brandt LJ, eds. ...

Experiments on PIM in Support of the Development of IVA Technology for Radiography at AWE

NASA Astrophysics Data System (ADS)

Clough, Stephen G.; Thomas, Kenneth J.; Williamson, Mark C.; Phillips, Martin J.; Smith, Ian D.; Bailey, Vernon L.; Kishi, Hiroshi J.; Maenchen, John E.; Johnson, David L.

2002-12-01

The PIM machine has been designed and constructed at AWE as part of a program to investigate IVA technology for radiographic applications. PIM, as originally constructed, was a prospective single module of a 14 MV, 100 kA, ten module machine. The design of such a machine is a primary goal of the program as several are required to provide multi-axis radiography in a new Hydrodynamics Research Facility (HRF). Another goal is to design lower voltage machines (ranging from 1 to 5 MV) utilizing PIM style components. The original PIM machine consisted of a single inductive cavity pulsed by a 10 ohm water dielectric Blumlein pulse forming line (PFL) charged by a Marx generator. These components successfully achieved their design voltages and data on the prepulse was obtained showing it to be worse than expected. This information provided a basis for design work on the 14 MV HRF IVA, carried out by Titan-PSD, resulting in a proposal for a prepulse switch, a prototype of which should be installed on PIM by the end of this year. The original single, coaxial switch used to initiate the Blumlein has been replaced by a prototype laser triggered switching arrangement, also designed by Titan-PSD, which it was desired to test prior to its eventual use in the HRF. Despite problems with the laser, which will necessitate further experiments, it was determined that laser triggering with low jitter was occurring. A split oil co-ax feed has now been used to install a second cavity, in parallel with the first, on the PIM Blumlein. This two cavity configuration provides a prototype for future radiographic machines operating at up to 3 MV and a test facility for diode research.

Social Models: Blueprints or Processes?

ERIC Educational Resources Information Center

Little, Graham R.

1981-01-01

Discusses the nature and implications of two different models for societal planning: (1) the problem-solving process approach based on Karl Popper; and (2) the goal-setting "blueprint" approach based on Karl Marx. (DC)

Lacerations - liquid bandage

MedlinePlus

... 2011:chap 28. Simon BC, Hern HG. Wound management principles. In: Marx JA, Hockberger RS, Walls RM, et al, eds. Rosen's Emergency Medicine: Concepts and Clinical Practice . 8th ed. Philadelphia, PA: Elsevier Saunders; 2014:chap ...

Alienation Incident.

ERIC Educational Resources Information Center

Wasserman, Louis

1979-01-01

Critiques Marxian "cures" for alienation as discussed in Karl Marx's "Economic and Philosophical Manuscripts." Also traces the activity of a former student who joined the revolution in Cuba. Journal available from 7 Harwood Drive, Amherst, New York, 14226. (KC)

Avulsion Fracture: How Is It Treated?

MedlinePlus

... Marx JA, et al., eds. General principles of orthopedic injuries. In: Rosen's Emergency Medicine: Concepts and Clinical ... trademarks of Mayo Foundation for Medical Education and Research. © 1998-2018 Mayo Foundation for Medical Education and ...

Nikolsky sign

MedlinePlus

Garber B, Cydulka RK. Dermatologic presentations. In: Marx JA, Hockberger RS, Walls RM, et al, eds. Rosen's Emergency Medicine: Concepts and Clinical Practice . 8th ed. Philadelphia, PA: Elsevier Saunders; 2014:chap 120. Habif TP. Vesicular and bullous ...

Development of Toxicity Benchmarks for Nitrogen-based Energetic Materials for the Enchytraeid Worm, Enchytraeus crypticus

DTIC Science & Technology

2013-11-01

pp 177–182. Anzhi, Z.L.; Marx, K.A.; Walker, J.; Kaplan, D.L. Trinitrotoluene and Metabolites Binding to Humic Acid . Environ. Sci. Technol. 1997...2001, pp 293–312. Thorn, K.A.; Kennedy, K.R. 15 N NMR Investigation of the Covalent Binding of Reduced TNT Amines to Soil Humic Acid , Model...9 3.2 Toxicity of Reference Toxicant, Boric Acid , to the Potworm E. crypticus ......15 3.3 Effects of 2,4-DNT on the Potworm E. crypticus

Tendinitis Pain: Should I Apply Ice or Heat?

MedlinePlus

... Marx JA, et al., eds. General Principles of Orthopedic Injuries. In: Rosen's Emergency Medicine: Concepts and Clinical ... trademarks of Mayo Foundation for Medical Education and Research. © 1998-2018 Mayo Foundation for Medical Education and ...

Laceration - sutures or staples - at home

MedlinePlus

... 2016:chap 28. Simon BC, Hern HG. Wound management principles. In: Marx JA, Hockberger RS, Walls RM, et al, eds. Rosen's Emergency Medicine: Concepts and Clinical Practice . 8th ed. Philadelphia, PA: Elsevier Saunders; 2014:chap ...

[Darwin versus Marx? Reflections on a book by Giovanni Jervis].

PubMed

Cavallaro, Luigi

2012-01-01

Giovanni Jervis'2002 book Individualismo e cooperazione. Psicologia della politica [Individualism and Cooperation: Psychology of Politics] is the outcome of a critical reflection begun by the author at the end of the 1970s in order to explore the manifestations and the problems of cooperation between individuals, and to identify some "universal" psychological factors that could define the role of psychology within politics and constitute an "objective foundation" of any human culture. Although Jervis was, so to speak,favoring Darwin against Marx, it is argued that,from his overall reasoning, several of his arguments actually are in favor of the inevitable "historicity" of individuals, due to the social conditioning they are subjected since birth: too often certain "universalistic" approaches transmit, together with scientific advances (or even without them), well identifiable ideological motives linked to precise and well defined historical and economic interests?

Pioneers of laser propulsion: Saenger, Marx, Moeckel, and Kantrowitz

NASA Astrophysics Data System (ADS)

Michaelis, Max M.; Hey, John D.

2002-09-01

The strength of empires and civilizations has often depended on novel forms of transportation: the Viking long boat, the Roman road, Iberian galleons, French and British steam ships, Indian trains, the car of the early twentieth century, the plane of the middle and the rocket of late. But Space has now come up against a barrier: the enormous and barely affordable expense of putting things into orbit and the unaffordable energy required to travel to the stars. The recent advent of very energetic lasers may reduce the cost. The pioneering ideas of the mid sixties appear less fanciful. Laser space propulsion is about to become such an important topic that its scientific origin and engineering roots need to be investigated. This is by no means an exhaustive survey. We review here the laser propulsion work of four eminent experts: Eugen Saenger, George Marx, Wolfgang Moeckel and Arthur Kantrowitz.

An university-scale pulsed-power system using a bipolar Marx generator

NASA Astrophysics Data System (ADS)

Chang, Po-Yu; Yang, Sheng-Hua; Huang, Mei-Feng; Isaps, Natl Cheng Kung Univ Team

2017-10-01

A bipolar Marx generator is being built for x-ray sources or laboratory astrophysics and space research for university-scale laboratory. The system consists of ten stages. In each stage, two 1 μF capacitors connected in series are charged to +/- 30 kV storing 9 kJ of total energy. It delivers a current of 200 kA to the load with a 200 ns rise time during the discharge. It will be used for following three purposes: (1) gas-puff z pinches generating soft x-ray for bio-medical research in the future; (2) generating plasma jets to study interactions between plasma flows and unmagnetized/magnetized obstacles analogous to the interactions between solar winds and planetary magnetic fields or unmagnetized planets; and (3) studying the pinch in a dense plasma focus device. The results of current measurements and circuit characteristics are shown.

Heimlich maneuver

MedlinePlus

... nih.gov/pubmed/26472993 . Thomas SH, Goodloe JM. Foreign bodies. In: Marx JA, Hockberger RS, Walls RM, eds. Rosen's Emergency Medicine: Concepts and Clinical Practice. 8th ed. Philadelphia, PA: Elsevier Saunders; 2014:chap 60. Review Date 3/31/2017 Updated by: Jacob L. ...

Science under duress

NASA Astrophysics Data System (ADS)

2016-11-01

In the first half of the 20th century, devotion to Marx's "one science" contributed to the deaths of millions of ordinary Russians. How this happened is the subject of Stalin and the Scientists: a History of Triumph and Tragedy by Simon Ings.

Prerenal azotemia

MedlinePlus

... failure. In: Marx JA, Hockberger RS, Walls RM, et al, eds. Rosen's Emergency Medicine: Concepts and Clinical Practice . 8th ed. Philadelphia, PA: Elsevier Saunders; 2014:chap 97. Review Date 10/22/2016 Updated by: Walead Latif, MD, Nephrologist and Clinical Associate Professor, Rutgers Medical ...

Osmotic diuresis

MedlinePlus

... disorders. In: Marx JA, Hockberger RS, Walls RM, et al, eds. Rosen's Emergency Medicine: Concepts and Clinical Practice . 8th ed. Philadelphia, PA: Elsevier Saunders; 2014:chap 125. Review Date 8/22/2016 Updated by: Laura J. Martin, MD, MPH, ABIM Board Certified in Internal Medicine ...

Marx in Narnia.

ERIC Educational Resources Information Center

Wade, Barrie; Sheppard, John

1989-01-01

Argues that teachers must understand the different values found in children's literature. Examines four aspects of values present in C. S. Lewis's "Chronicles of Narnia." Asserts that teachers must take responsibility for how such texts are received by young readers in the current multicultural, sexually equal society. (MM)

Urban schools' teachers enacting project-based science

NASA Astrophysics Data System (ADS)

Tal, Tali; Krajcik, Joseph S.; Blumenfeld, Phyllis C.

2006-09-01

What teaching practices foster inquiry and promote students to learn challenging subject matter in urban schools? Inquiry-based instruction and successful inquiry learning and teaching in project-based science (PBS) were described in previous studies (Brown & Campione, [1990]; Crawford, [1999]; Krajcik, Blumenfeld, Marx, Bass, & Fredricks, [1998]; Krajcik, Blumenfeld, Marx, & Solloway, [1994]; Minstrell & van Zee, [2000]). In this article, we describe the characteristics of inquiry teaching practices that promote student learning in urban schools. Teaching is a major factor that affects both achievement of and attitude of students toward science (Tamir, [1998]). Our involvement in reform in a large urban district includes the development of suitable learning materials and providing continuous and practiced-based professional development (Fishman & Davis, in press; van Es, Reiser, Matese, & Gomez, [2002]). Urban schools face particular challenges when enacting inquiry-based teaching practices like those espoused in PBS. In this article, we describe two case studies of urban teachers whose students achieved high gains on pre- and posttests and who demonstrated a great deal of preparedness and commitment to their students. Teachers' attempts to help their students to perform well are described and analyzed. The teachers we discuss work in a school district that strives to bring about reform in mathematics and science through systemic reform. The Center for Learning Technologies in Urban Schools (LeTUS) collaborates with the Detroit Public Schools to bring about reform in middle-school science. Through this collaboration, diverse populations of urban-school students learn science through inquiry-oriented projects and the use of various educational learning technologies. For inquiry-based science to succeed in urban schools, teachers must play an important role in enacting the curriculum while addressing the unique needs of students. The aim of this article is to describe patterns of good science teaching in urban school.

[The radioiodine test for the evaluation of iodine deficiency in the district of Karl-Marx-Stadt and in East Germany].

PubMed

Bauch, K; Weiss, O; Möckel, G; Gerlach, J; Seitz, W; Ulrich, F E; Dempe, A

1981-10-01

The values of the per cent 24 h radioiodine uptake in the GDR are above 60--70% and speak for a low alimentary intake of iodine or renal excretion of iodine below 40 micrograms J/d. Like the struma prevalences they show a tendency increasing from north to south and characterize the whole European situation of iodine deficiency including its decrease from west to east. The mean values of radioiodine uptake of 71.7 +/- 13.2% (n = 110) in euthyroids of the district of Karl-Marx-Stadt correspond to the iodine deficiency as it occurs approximately in the districts of Erfurt, Dresden, Munich or Freiburg/B. The alimentary iodine intake of 38.4 +/- 17.2 micrograms J/d and the renal iodine excretion of 29.9 +/- 16.1 micrograms J/d, calculated from the 24 h radioiodine accumulation values of 40 euthyroid persons by means of a mathematical model developed by Oddie and co-workers were low. The latter only slightly differed (P less than 0.05) from its chemically estimated excretion of iodine in the urine: 23.1 +/- 16.9 micrograms J/g creatinine (n = 73). Between the calculated and chemically estimated excretion of iodine there was a relatively strict correlation of r = 0.68 (n = 26; P less than 0.001). The introduction of an iodine prophylaxis is regarded as an urgent necessity. Later on a new estimation of the regional "normal values" is necessary for the per cent radioiodine uptake.

A novel trigger for pseudospark switch with high repetition rate, low jitter, and compact structure

NASA Astrophysics Data System (ADS)

Yan, Jiaqi; Shen, Saikang; Wang, Yanan; Zhang, Siyu; Cheng, Le; Ding, Weidong

2018-06-01

This paper presents the design and development of a trigger with a high repetition rate, low jitter, and compact structure for the pseudospark switch (PSS), which includes an improved Marx generator based on avalanche transistors and a corona-plasma trigger unit. The generator adopted a novel 3 × 12-stage Marx circuit based on avalanche transistors in which the failure rate of transistors in the first and second stages was significantly reduced by connecting the parallel capacitors compared to the previous similar generator. The reason for the improved performance was also discussed. The main parameters of output pulses were an amplitude of -7 kV, rise time of 6 ns, jitter of 0.2 ns, and repetition rate of 2 kHz. The corona-plasma trigger unit adopted BaTiO3 ceramics with high ɛr as the dielectric and was arranged in the hollow cathode of the PSS. The experiments of triggering a PSS prototype were conducted. The influence of anode voltage and pressure on the trigger delay and jitter was studied, and the minimum trigger jitter achieved <1 ns. This trigger worked for 107 shots at the repetition rate of 2 kHz continuously without obvious performance degradation and any failure of the generator. The main advantage of this trigger is the simultaneous combination of the high repetition rate, low jitter, long lifetime, and great simplicity in a compact structure.

L'Ordine Nuovo: The Legacy of Antonio Gramsci and the Education of Adults.

ERIC Educational Resources Information Center

Armstrong, Paul F.

1988-01-01

The author presents a biography of Antonio Gramsci and discusses the influence of Karl Marx on Gramsci's key ideas concerning mode of production, superstructure, hegemony, consciousness, praxis, and intellectuals. Gramsci's emphasis on adult education for socialism is discussed. (CH)

Murphy's Moral Economy of Labor.

ERIC Educational Resources Information Center

Masters, Roger D.

1996-01-01

Praises and summarizes James Bernard Murphy's "The Moral Economy of Labor: Aristotelian Themes in Economic Theory." Linking economic theories from Adam Smith to Karl Marx, Murphy criticizes traditional economic and social thinking regarding the division of labor. He proposes an integration of conceptualization and execution to humanize…

Marxism and Communication.

ERIC Educational Resources Information Center

Daley, Patrick J.; Soloski, John

Karl Marx and Friedrich Engels had little to say specifically about communication and language, but their works hint at the direction their critique of communication might have taken. Language and consciousness are conditioned by specific means of production and sociopolitical circumstances and are therefore ideological. The domain of ideology…

Social Marxism, class conflict and health care.

PubMed

Alaszewski, A; Manthorpe, J

In the first of a six-part series the sociological theories of Karl Marx are examined and related to the purported neutrality of medicine. The role of nursing within a Marxist analysis of the world is considered, and the value of such analysis is described.

Urban Schools' Teachers Enacting Project-Based Science

ERIC Educational Resources Information Center

Tal, Tali; Krajcik, Joseph S.; Blumenfeld, Phyllis C.

2006-01-01

What teaching practices foster inquiry and promote students to learn challenging subject matter in urban schools? Inquiry-based instruction and successful inquiry learning and teaching in project-based science (PBS) were described in previous studies (Brown & Campione, [1990]; Crawford, [1999]; Krajcik, Blumenfeld, Marx, Bass, & Fredricks,…

Bacteriological findings in patients with bone marrow transplantation (Karl Marx University Leipzig, 1985-1987).

PubMed

Wonitzki, C; Hoffmann, F A

1989-01-01

The results of the bacteriological surveillance cultures for 26 patients with bone marrow transplantation (Karl Marx University Leipzig, G.D.R., 1985-1987) are presented. 5.9% of all surveillance cultures contained facultatively pathogenic germs (with Pseudomonas aeruginosa as the most frequent representative, which was the reason of a sepsis in two patients). Coagulasenegative Staphylococci and other germs with an obscure pathogenicity were isolated upon a large scale, especially from the mucous membrane regions. There are hints, that above all special strains of coagulasenegative Staphylococci "colonize" the patient's body (also for longer periods) and turn into the blood too. During the total decontamination intestinal anaerobic flora is absent. After closing of total decontamination Clostridium perfringens is the first detectable anaerobic species. During the selective decontamination systemic applications of antibiotics are able to obliterate anaerobic findings for certain periods. Recommendations for an effective arrangement of the surveillance cultures of bone marrow transplantation patients are given.

Petawatt pulsed-power accelerator

DOEpatents

Stygar, William A.; Cuneo, Michael E.; Headley, Daniel I.; Ives, Harry C.; Ives, legal representative; Berry Cottrell; Leeper, Ramon J.; Mazarakis, Michael G.; Olson, Craig L.; Porter, John L.; Wagoner; Tim C.

2010-03-16

A petawatt pulsed-power accelerator can be driven by various types of electrical-pulse generators, including conventional Marx generators and linear-transformer drivers. The pulsed-power accelerator can be configured to drive an electrical load from one- or two-sides. Various types of loads can be driven; for example, the accelerator can be used to drive a high-current z-pinch load. When driven by slow-pulse generators (e.g., conventional Marx generators), the accelerator comprises an oil section comprising at least one pulse-generator level having a plurality of pulse generators; a water section comprising a pulse-forming circuit for each pulse generator and a level of monolithic triplate radial-transmission-line impedance transformers, that have variable impedance profiles, for each pulse-generator level; and a vacuum section comprising triplate magnetically insulated transmission lines that feed an electrical load. When driven by LTD generators or other fast-pulse generators, the need for the pulse-forming circuits in the water section can be eliminated.

Quetelet and the emergence of the behavioral sciences.

PubMed

Jahoda, Gustav

2015-01-01

Adolphe Quetelet was one of the most prominent figures of the second half of the nineteenth century, yet in present-day histories of several social sciences the impact of his ideas is widely ignored. The first part consists of a sketch of his life and work. Astronomer and statistician, he sought to apply the mathematical tools of astronomy to create was has been called a 'mathematics of society'. In particular he demonstrated regularities in the incidence of various social phenomena, notably crime, whose implications were widely debated. In the second part the influence he exerted on some key figures in the then emerging social sciences is traced in some detail; these figures include Durkheim, Galton, Marx, and Tylor. He also advocated the wider use of statistics and his call had a powerful impact on the then emerging fields such as administration, economics, sociology and psychology. He influenced some of his most famous contemporaries, including Florence Nightingale, Karl Marx and Francis Galton.

Foundations of Job Satisfaction in the Media Industries.

ERIC Educational Resources Information Center

DeFleur, Margaret H.

1992-01-01

Examines classic sources on job satisfaction, including Adam Smith, Karl Marx, and the Hawthorne studies. Studies the job satisfaction of 1,526 mass communication graduates and compares satisfaction levels across the 9 different media fields. Finds a clear hierarchy of satisfaction within the nine fields. (SR)

Iroquois Contributions to Modern Democracy and Communism.

ERIC Educational Resources Information Center

Bagley, Carol L.; Ruckman, Jo Ann

1983-01-01

Considers the influence of the Iroquois Great Law of Peace in American government and its possible influence on Russian government. Discusses history of Iroquois society and describes their form of representative democracy. Cites references to Iroquois government and law by Karl Marx, Frederick Engels, and Benjamin Franklin. (JHZ)

Alienation, Mass Society and Mass Culture.

ERIC Educational Resources Information Center

Dam, Hari N.

This monograph examines the nature of alienation in mass society and mass culture. Conceptually based on the "Gemeinschaft-Gesellschaft" paradigm of sociologist Ferdinand Tonnies, discussion traces the concept of alienation as it appears in the philosophies of Hegel, Marx, Kierkegaard, Sartre, and others. Dwight Macdonald's "A Theory of Mass…

The Problem is People, Social Studies: 6425.07.

ERIC Educational Resources Information Center

Ratchford, Frank

Population education is the focus of this quinmester curriculum guide for secondary students. By examining and comparing past population theories of Malthus and Marx with present theories students will better understand the present situation, cultural attitudes toward the problems, and the ecological consequences of overpopulation. Objectives are…

Operative management of partial-thickness tears of the proximal hamstring muscles in athletes.

PubMed

Bowman, Karl F; Cohen, Steven B; Bradley, James P

2013-06-01

Partial tears of the hamstring muscle origin represent a challenging clinical problem to the patient and orthopaedic surgeon. Although nonoperative treatment is frequently met with limited success, there is a paucity of data on the efficacy of surgical management for partial proximal hamstring tears in the active and athletic population. To evaluate the results of an anatomic repair for partial tears of the hamstring muscle origin in athletes. Case series; Level of evidence, 4. The records of 17 patients with partial tears of the proximal hamstring origin were reviewed after institutional review board approval was obtained. All patients were treated with open debridement and primary tendon repair after failure of at least 6 months of nonoperative therapy. Clinical and operative records, radiographs, and magnetic resonance images were reviewed for all patients. A patient-reported outcomes survey was completed by 14 patients that included the Lower Extremity Functional Score (LEFS), Marx activity rating scale, custom LEFS and Marx scales, and subjective patient satisfaction scores. Early and late postoperative complications were recorded. There were 3 male and 14 female patients; their average age was 43 years (range, 19-64 years) and average follow-up was 32 months (range, 12-51 months). There were 2 collegiate athletes (field hockey, track), 14 amateur athletes (distance running, waterskiing, tennis), and a professional bodybuilder. Postoperative LEFS was 73.3 ± 9.9 (range, 50-80) and custom LEFS was 66.7 ± 17.0 (range, 37-80) of a maximum 80 points. The most commonly reported difficulty was with prolonged sitting and explosive direction change while running. The average Marx score was 6.5 ± 5.3 (range, 0-16) of a maximum 16, correlating with a greater return to recreational running activities in this patient cohort than regular participation in pivoting or cutting sports. Marx custom scores were 20 of a maximum 20 in all patients, demonstrating no disability in the operative extremity with activities of daily living. No patient underwent a subsequent surgery. One patient was not satisfied with the result and reported persistent symptoms during competitive distance running. All patients were able to return to their preoperative level of activity after surgery. Anatomic surgical treatment of partial proximal hamstring avulsions can lead to satisfactory functional outcomes, a high rate of return to athletic activity, and low complication rate. This procedure should be reserved for patients who have failed an extended course of nonoperative treatment, and the proximity of the sciatic nerve mandates a careful assessment of the risk-benefit ratio before surgery is undertaken.

Property and women's alienation from their own reproductive labour.

PubMed

Dickenson, D L

2001-06-01

There is an urgent need for reconstructing models of property to make them more women-friendly. However, we need not start from scratch: both 'canonical' and feminist authors can sometimes provide concepts which we can refine and apply towards women's propertylessness. This paper looks in particular at women's alienation from their reproductive labour, building on Marx and Delphy. Developing an economic and political rather than a psychological reading of alienation, it then considers how the refined and revised concept can be applied to concrete examples in global justice for women: in particular, the commercialisation of embryonic and fetal tissue in the new stem cell technologies.

Evolutionary Trends and the Salience Bias (with Apologies to Oil Tankers, Karl Marx, and Others).

ERIC Educational Resources Information Center

McShea, Daniel W.

1994-01-01

Examines evolutionary trends, specifically trends in size, complexity, and fitness. Notes that documentation of these trends consists of either long lists of cases, or descriptions of a small number of salient cases. Proposes the use of random samples to avoid this "saliency bias." (SR)

Marx and Skinner: Race Relations and Strange Bedfellows.

ERIC Educational Resources Information Center

Rosen, Gerald

This paper places race relations theory within the general theory of human behavior which combines behaviorist psychology and Marxist theory. It argues for a revisionist theory of race relations where a situation or condition leads to a behavior pattern (discrimination) which in turn leads to an attitude (racism or prejudice). This…

Karl Marx, Ludwig Wittgenstein, and Black Underachievement in the United States and United Kingdom

ERIC Educational Resources Information Center

Tomlin, Carol; Wright, Cecile; Mocombe, Paul C.

2013-01-01

This article synthesizes Marxian conceptions of identity construction within capitalist relations of production with the Wittgensteinian notion of "language games" to offer a more appropriate relational framework within which scholars ought to understand the Black-White academic achievement gap in America, the United Kingdom, and…

Economics with a Sense of Humor.

ERIC Educational Resources Information Center

Keenan, Diane

1985-01-01

In this humorous dialogue that can be read and acted out as a play in high school economics classes, Karl Marx, a spokesman for communism, and Adam Smith, the father of capitalism, debate (1) whether an economy should produce designer jeans and (2) who should own McDonald's restaurant. (RM)

Nature, Human Nature, and Solutions to Problems.

ERIC Educational Resources Information Center

Pedrini, D. T.; Pedrini, B. C.

This paper promotes an undergraduate course that would discuss the great ideas of Plato, St. Paul, Karl Marx, Sigmund Freud, Jean Paul Sartre, B. F. Skinner, and Konrad Lorenz. This course would help students understand human values and behaviors while focusing on historical, world, and national problems. Tentative solutions would then be…

The Art of Self-Reflection

ERIC Educational Resources Information Center

Villano, Matt

2006-01-01

Metaphysically speaking, the idea of self-reflection has been the subject of discussion for thousands of years. The idea carried human beings through the Renaissance, and an entire movement tied to it sparked a sociopolitical movement called the Enlightenment. In more recent times, thought leaders such as Immanuel Kant, Karl Marx, and Sigmund…

Labor Market Characteristics and the Labor Force Participation of Individuals,

DTIC Science & Technology

1981-11-01

Bass, 1970, pp. 38-47. Durkheim , Emile , Les Regles del la Methode Sociologieque, Paris, F. Alcan, 1895. Fuguitt, Glenn and Stanley Lieberson...and conditioned by the cultural (e.g., Durkheim , 1895) or material (e.g., Marx and Engels, 1922) conditions of the collectivities in which people live

On the Mo-Papas equation

NASA Astrophysics Data System (ADS)

Aguirregabiria, J. M.; Chamorro, A.; Valle, M. A.

1982-05-01

A new heuristic derivation of the Mo-Papas equation for charged particles is given. It is shown that this equation cannot be derived for a point particle by closely following Dirac's classical treatment of the problem. The Mo-Papas theory and the Bonnor-Rowe-Marx variable mass dynamics are not compatible.

Why Read the Great 19th-Century Historians?

ERIC Educational Resources Information Center

Clive, John

1978-01-01

Clive comments on the literary power of Karl Marx (The Eighteenth Brumaire of Louis Napoleon), Alexis de Tocqueville (The Old Regime and the Revolution), Thomas Carlyle (French Revolution), and Jakob Burkhardt (The Civilization of the Renaissance in Italy); and notes Macaulay's sensitivity to the "public mind" (History of England). (SJL)

An Enhanced Studio Physics Model: Which Technologies are Productive?

ERIC Educational Resources Information Center

MacKinnon, Gregory R.; Williams, Peter

2006-01-01

The notion of problem-based physics laboratories enhanced by computer technology has been coined "studio physics" (Wilson, 1994) and has been practised at various institutions for some time (Cummings, Marx, Thornton, & Kuhl, 1999; Williams, MacLatchy, Backman, & Retson, 1997). In recent years, new technology tools have been available to supplement…

Lenin: An Activist Burdened by a Passivist Philosophy.

ERIC Educational Resources Information Center

Johnson, Karen S.

The paper discusses Lenin's attempts to alleviate discrepancies between Marxist philosophy and his own personal activist creed by, first, introducing Hegelian logic into dialectical materialism and, second, by creating an ideology of organizational activity. Lenin the man is examined in order to understand his interpretation of Marx and the gap…

Critical Theory: Implications for School Leadership Theory and Practice.

ERIC Educational Resources Information Center

Peca, Kathy

The school leader's behaviors are inspired by theories, and theories are intrinsic to practice. This paper provides an overview of an emerging perspective in educational administration, critical theory. The paper first highlights the philosophies of Immanuel Kant, Fichte, Hegel, Marx, and the Frankfurt School. It then discusses critical theory…

Knowledge Production in Small and Medium Sized Enterprises

ERIC Educational Resources Information Center

Van der Meer, Han

2010-01-01

This article presents the author's response to Hisham B. Ghassib's (2010) article entitled "Where Does Creativity Fit into a Productivist Industrial Model of Knowledge Production?" When the author tries to characterise Ghassib's (2010) world, three words come into mind: University, Scientific Knowledge, and Marx. The author's world on the other…

"Wo Es War": Psychoanalysis, Marxism, and Subjectivity

ERIC Educational Resources Information Center

Cho, Daniel

2007-01-01

Subjectivity, for Descartes, emerged when he doubted the veracity of his knowledge. Instead of truth, he counted this knowledge to be inherited myth. Cartesian subjectivity has been helpful for forming a critical education predicated on doubting ideology and hegemony. But Marx indicates a very different kind of knowledge in his analysis of…

Sociological Aspects of Deafness.

ERIC Educational Resources Information Center

World Federation of the Deaf, Rome (Italy).

Nine conference papers treat the sociological aspects of deafness. Included are "Individuals Being Deaf and Blind and Living with a Well Hearing Society" by A. Marx (German Federal Republic), "A Deaf Man's Experiences in a Hearing World" by A. B. Simon(U.S.A.), "Problem of Text Books and School Appliances for Vocational…

Economic Heritage: Adam Smith vs. Karl Marx

ERIC Educational Resources Information Center

Manton, Edgar J.; English, Donald E.

2008-01-01

The problem of this study was to determine the number of first semester college freshmen who could correctly identify the individuals who are generally considered the "fathers" of communism and capitalism. A questionnaire was administered to 241 freshmen students enrolled in English 101, College Reading and Writing, at Texas A&M…

A Revised Marxist Political Economy of National Education Markets

ERIC Educational Resources Information Center

Marginson, Simon

2004-01-01

This article synthesises the social and economic dynamics of both non-market and market production in national education systems, drawing primarily on Marx's analysis of the commodity and Hirsch on positional competition. Market production has six principal aspects: a defined field of production, protocols governing entry/exit, the production of…

Learning to Compute: Computerization and Ordinary, Everyday Life

ERIC Educational Resources Information Center

Sullivan, Joseph F.

2009-01-01

This study utilizes the basic framework of classical sociology as a foundation for examining the intersection of the structural history of the computer revolution with ordinary, everyday life. Just as the classical forefathers of modern sociology--Marx, Durkheim, and Weber--attempted to understand their eras of structural transformation, this…

Recent developments in high average power driver technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prestwich, K.R.; Buttram, M.T.; Rohwein, G.J>

1979-01-01

Inertial confinement fusion (ICF) reactors will require driver systems operating with tens to hundreds of megawatts of average power. The pulse power technology that will be required to build such drivers is in a primitive state of development. Recent developments in repetitive pulse power are discussed. A high-voltage transformer has been developed and operated at 3 MV in a single pulse experiment and is being tested at 1.5 MV, 5 kj and 10 pps. A low-loss, 1 MV, 10 kj, 10 pps Marx generator is being tested. Test results from gas-dynamic spark gaps that operate both in the 100 kVmore » and 700 kV range are reported. A 250 kV, 1.5 kA/cm/sup 2/, 30 ns electron beam diode has operated stably for 1.6 x 10/sup 5/ pulses.« less

Chaos Criminology: A critical analysis

NASA Astrophysics Data System (ADS)

McCarthy, Adrienne L.

There has been a push since the early 1980's for a paradigm shift in criminology from a Newtonian-based ontology to one of quantum physics. Primarily this effort has taken the form of integrating Chaos Theory into Criminology into what this thesis calls 'Chaos Criminology'. However, with the melding of any two fields, terms and concepts need to be translated properly, which has yet to be done. In addition to proving a translation between fields, this thesis also uses a set of criteria to evaluate the effectiveness of the current use of Chaos Theory in Criminology. While the results of the theory evaluation reveal that the current Chaos Criminology work is severely lacking and in need of development, there is some promise in the development of Marx's dialectical materialism with Chaos Theory.

Note: Tesla based pulse generator for electrical breakdown study of liquid dielectrics

NASA Astrophysics Data System (ADS)

Veda Prakash, G.; Kumar, R.; Patel, J.; Saurabh, K.; Shyam, A.

2013-12-01

In the process of studying charge holding capability and delay time for breakdown in liquids under nanosecond (ns) time scales, a Tesla based pulse generator has been developed. Pulse generator is a combination of Tesla transformer, pulse forming line, a fast closing switch, and test chamber. Use of Tesla transformer over conventional Marx generators makes the pulse generator very compact, cost effective, and requires less maintenance. The system has been designed and developed to deliver maximum output voltage of 300 kV and rise time of the order of tens of nanoseconds. The paper deals with the system design parameters, breakdown test procedure, and various experimental results. To validate the pulse generator performance, experimental results have been compared with PSPICE simulation software and are in good agreement with simulation results.

Impedance-matched Marx generators

NASA Astrophysics Data System (ADS)

Stygar, W. A.; LeChien, K. R.; Mazarakis, M. G.; Savage, M. E.; Stoltzfus, B. S.; Austin, K. N.; Breden, E. W.; Cuneo, M. E.; Hutsel, B. T.; Lewis, S. A.; McKee, G. R.; Moore, J. K.; Mulville, T. D.; Muron, D. J.; Reisman, D. B.; Sceiford, M. E.; Wisher, M. L.

2017-04-01

We have conceived a new class of prime-power sources for pulsed-power accelerators: impedance-matched Marx generators (IMGs). The fundamental building block of an IMG is a brick, which consists of two capacitors connected electrically in series with a single switch. An IMG comprises a single stage or several stages distributed axially and connected in series. Each stage is powered by a single brick or several bricks distributed azimuthally within the stage and connected in parallel. The stages of a multistage IMG drive an impedance-matched coaxial transmission line with a conical center conductor. When the stages are triggered sequentially to launch a coherent traveling wave along the coaxial line, the IMG achieves electromagnetic-power amplification by triggered emission of radiation. Hence a multistage IMG is a pulsed-power analogue of a laser. To illustrate the IMG approach to prime power, we have developed conceptual designs of two ten-stage IMGs with L C time constants on the order of 100 ns. One design includes 20 bricks per stage, and delivers a peak electrical power of 1.05 TW to a matched-impedance 1.22 -Ω load. The design generates 113 kV per stage and has a maximum energy efficiency of 89%. The other design includes a single brick per stage, delivers 68 GW to a matched-impedance 19 -Ω load, generates 113 kV per stage, and has a maximum energy efficiency of 90%. For a given electrical-power-output time history, an IMG is less expensive and slightly more efficient than a linear transformer driver, since an IMG does not use ferromagnetic cores.

Intellectual Freedom and Economic Sufficiency as Educational Entitlements.

ERIC Educational Resources Information Center

Morse, Jane Fowler

2001-01-01

Using the theories of John Stuart Mill and Karl Marx, this article supports the educational entitlements of intellectual freedom and economic sufficiency. Explores these issues in reference to their implications for teaching, the teaching profession and its training. Concludes that ideas cannot be controlled by the interests of the dominant class.…

In the Event of Learning: Alienation and Participative Thinking in Education

ERIC Educational Resources Information Center

Sidorkin, Alexander M.

2004-01-01

This essay begins with Karl Marx's notion of alienation, and then explores a form of alienation specific to education. It examines Mikhail Bakhtin's treatment of alienation in connection with his participative thinking theory and suggests strategies for overcoming educational alienation that are based on Bakhtin's notion of the eventness of Being.…

Competence: Commodification of Human Ability

ERIC Educational Resources Information Center

Han, Soonghee

2008-01-01

The purpose of this article is to analyze the meaning and presumptions of competence in the concrete context of knowledge capitalism. First, the nature of competence as a "commodification of human ability" that obtains a standardized monetary value to sell in the labor market, is elucidated by applying Karl Marx's critical theory. Second, it is…

Semantic Elements in Deep Structures as Seen from a Modernist Definition of Clarity.

ERIC Educational Resources Information Center

Lemke, Alan

Typically, teachers approach ambiguity in student writing by suggesting that students focus on diction, syntax, and writing format; however, the works of modernists (including T.S. Eliot, Ludwig Wittgenstein, Karl Marx, and Pablo Picasso) suggest the importance of conceptions of semantic clarity. Transformational models for syntactic elements in…

Planning, Decisions, and Human Nature.

ERIC Educational Resources Information Center

Keller, George

1998-01-01

Brings the perspectives of five individuals (Sigmund Freud, Karl Marx, Charles Darwin, Johann von Herder, James Madison) to the question of why humans behave as they do when faced with the need for decision making and change in higher education. Argues that effecting change is easier if leaders attend to the concerns and fears of those affected by…

Adolescent Black Males' Drug Trafficking and Addiction: Three Theoretical Perspectives.

ERIC Educational Resources Information Center

Moore, Sharon E.

1995-01-01

Explains the incidence and nature of drug trafficking and chemical dependency among adolescent black males. The paper also discusses the social science theories of Emile Durkheim, Karl Marx, and Molefi Asante to better understand the behaviors, and the consequences of those behaviors, of young black males who participate in drug trafficking. (GR)

The Bourgeoisie Dream Factory: Teaching Marx's Theory of Alienation through an Experiential Activity

ERIC Educational Resources Information Center

Windsor, Elroi J.; Carroll, Alana M.

2015-01-01

Effectively teaching sociological theories to undergraduate students is challenging. Students often enroll in theory courses due to major requirements, not personal interest. Consequently, many students approach the study of theory with anxiety. This study examined the effectiveness of an experiential learning activity designed to teach Karl…

East Europe Report, Political, Sociological and Military Affairs.

DTIC Science & Technology

1983-11-10

34Dialektyka i historia " [Dialectics and History], Lenin was the only one of Marx’s successors to undertake an open dialectic with "Das Kapital" and to...Milan Veres, Yugoslav ambassador in Budapest , and presented him the Order of Flag of the Hungarian People’s Republic. [Text] [AU231531 Belgrade

Critical Social Theory: A Portrait

ERIC Educational Resources Information Center

Torres, Carlos A.

2012-01-01

The term Critical Social Theory is employed in this article following the tradition of the Frankfurt School, and particularly the work of Herbert Marcuse and his interpretation of the political and social philosophy of Hegel and Marx. Discussing the contribution of G.W.F. Hegel to social theory Marcuse argued that: "Hegel's system brings to a…

Transatlantic Dialogue: A Research Exchange; Papers from a Joint Conference (Leeds, England, July 11-13, 1988).

ERIC Educational Resources Information Center

Zukas, Miriam, Ed.

Over 90 papers focus on adult education research. Selected titles include "Karl Marx's Theoretical Contributions to Radical Adult Education" (Allman, Wallis); "Educating Educators" (Armstrong); "Comparative Study of Philosophical Foundations of Adult Education in China and United States" (Bao); "Ethical Value Dilemmas of Professional Adult…

Post-Structuralism and Marxism: Education as Knowledge Capitalism.

ERIC Educational Resources Information Center

Peters, Michael

2003-01-01

Argues for "post-structural Marxism" as the pedagogical practice of reading and rereading Marx in a critical manner. Briefly discusses the concept of the social in the post-modern condition before reviewing relations between post-structuralism and Marxism. Provides an account of Deleuze's Marxism, using it to analyze education as a form…

Becoming through Revolutionary Pedagogy: An Interview with Curry Malott and Derek R. Ford

ERIC Educational Resources Information Center

Wubbena, Zane C.

2016-01-01

In this interview, Curry Malott and Derek R. Ford discuss their new book, "Marx, Capital, and Education: Towards a Critical Pedagogy of Becoming." The interview begins with a general inquiry into their intellectual backgrounds as scholar-activists and, importantly, comrades. The authors then discuss the process of collaborating together…

The Antinomic Condition of the University: "Universal Labour" beyond "Academic Capitalism"

ERIC Educational Resources Information Center

Pavlidis, Periklis

2012-01-01

This paper aims at identifying the characteristics acquired by the university under the regime of academic capitalism. It also attempts to put forward their antinomic relationship to the essential properties of academic activity, perceived in the light of the concept of "universal labour" introduced by Karl Marx. (Contains 1 note.)

2. AERIAL VIEW, LOOKING WEST, ALONG FIRST AVENUE NORTH, WITH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. AERIAL VIEW, LOOKING WEST, ALONG FIRST AVENUE NORTH, WITH BROWN MARX BUILDING (BOTTOM CENTER TO RIGHT), EMPIRE BUILDING (CENTER TOP) WITH ITS TERRACOTTA-CLAD 20TH STREET AND FIRST AVENUE FACADES, AND JOHN HAND BUILDING - Heaviest Corner on Earth (Commercial), First Avenue, North & Twentieth (20th) Street, North, Birmingham, Jefferson County, AL

Alienation and First-Year Student Retention. Professional File. Number 116, Spring 2010

ERIC Educational Resources Information Center

Liu, Richard

2010-01-01

Since Summerskill's study on college attrition forty years ago, the interest in this topic has never waned. This study was particularly interested in the relationship of race to retention. Various theoretical frames of references have been proposed: Price's organization theory, Durkheim's Suicide, and Marx's Alienation have been used to guide…

Sixteen Trends...Their Profound Impact on Our Future

ERIC Educational Resources Information Center

Marx, Gary

2011-01-01

Seismic Shifts. Future Forces. Call them whatever you'd like. The Sixteen Trends revealed in this benchmark book will have a profound impact on our future. Noted futurist, educator, communicator, executive and leadership counsel, author, and international speaker Gary Marx makes the case for those trends and speculates on their implications for…

PBFA II, a 100 TW Pulsed Power Driver for the Inertial Confinement Fusion Program

DTIC Science & Technology

1985-06-01

providing a 30 MV, 15 ns output pulse,which accelerates lithium ions. The ions will focus onto a pellet containing deuterium-tritium, producing fusion ... energy . Several research areas will be reviewed: low jitter, highly reliable 370 kJ Marx generators; highly synchronized gas switching at 5 MV; efficient

[Peripartal mortality in an autopsy sample of the Pathologic Institute of the Department of Medicine of the Karl Marx University in Leipzig 1960-1982].

PubMed

Emmrich, P; Wötzel, E

1986-01-01

Between 1960 and 1982 we have autopsied 88 cases of peripartal mortality in the pathological institute of the department of medicine, Karl-Marx-University of Leipzig. According to the legal instruction in the GDR we have subdivided in direct and indirect peripartal death cases (direct and indirect relation between maternal mortality and pregnancy). We have compared both the groups (1960-1969, 1970-1982) and have found: The number of cases with indirect and direct relation between maternal mortality and pregnancy is decreased markedly in the second time period. The composition within the two time groups is very different in respect to the cause of the mortality: Between 1960 and 1969 amnioticfluid embolism, thromboembolism and air embolism, furthermore preeclampsia and their consequences as well as hemorrhages sub partu and postpartum could be found. In the second time group the most frequent causes of peripartal mortality are the different forms of embolism and preeclampsia, but then cases with a indirect relation between mortality and pregnancy with diseases of the cardiopulmonary system and of the kidneys.

A compact, low cost Marx bank for generating capillary discharge plasmas.

PubMed

Dyson, A E; Thornton, C; Hooker, S M

2016-09-01

We describe in detail a low power Compact Marx Bank (CMB) circuit that can provide 20 kV, 500 A pulses of approximately 100-200 ns duration. One application is the generation of capillary discharge plasmas of density ≈10 18 cm -3 used in laser plasma accelerators. The CMB is triggered with a high speed solid state switch and gives a high voltage output pulse with a ns scale rise time into a 50 Ω load (coaxial cable) with <4 ns voltage jitter. Its small size (10 cm  ×  25 cm  ×  5 cm) means that it can be placed right next to the capillary discharge in the target chamber to avoid the need to impedance match. The electrical energy required per discharge is <1 J, and the CMB can be run at shot repetition rates of ≳1 Hz. This low power requirement means that the circuit can easily be powered by a small lead acid battery and, therefore, can be floated relative to laboratory earth. The CMB is readily scalable and pulses >45 kV are demonstrated in air discharges.

A compact, low cost Marx bank for generating capillary discharge plasmas

NASA Astrophysics Data System (ADS)

Dyson, A. E.; Thornton, C.; Hooker, S. M.

2016-09-01

We describe in detail a low power Compact Marx Bank (CMB) circuit that can provide 20 kV, 500 A pulses of approximately 100-200 ns duration. One application is the generation of capillary discharge plasmas of density ≈1018 cm-3 used in laser plasma accelerators. The CMB is triggered with a high speed solid state switch and gives a high voltage output pulse with a ns scale rise time into a 50 Ω load (coaxial cable) with <4 ns voltage jitter. Its small size (10 cm × 25 cm × 5 cm) means that it can be placed right next to the capillary discharge in the target chamber to avoid the need to impedance match. The electrical energy required per discharge is <1 J, and the CMB can be run at shot repetition rates of ≳1 Hz. This low power requirement means that the circuit can easily be powered by a small lead acid battery and, therefore, can be floated relative to laboratory earth. The CMB is readily scalable and pulses >45 kV are demonstrated in air discharges.

Performance of PROMIS Physical Function Compared with KOOS, SF-36, Eq5d And Marx Activity Scale in Patients Who Undergo ACL Reconstruction

PubMed Central

Scott, Elizabeth; Glass, Natalie; Wolf, Brian R.; Hettrich, Carolyn M.; Bollier, Matthew

2018-01-01

Objectives: Anterior cruciate ligament reconstruction is a commonly performed orthopaedic procedure. PROMIS (Patient-Reported Outcome Measurement Information System) was developed by the National Institutes of Health in an effort to advance patient-reported outcome (PRO) instruments by developing question banks for major health domains. Our goal was to compare the responsiveness and construct validity of the PROMIS physical function (PF) computer adaptive test (CAT) with current PRO instruments utilized in patients who undergo anterior cruciate ligament reconstruction. Methods: A total of 174 patients ages 14-53 scheduled to undergo anterior cruciate ligament reconstruction were asked to complete PROMIS PF-CAT, Short Form-36 Health Survey (SF36-PF and -GH), Marx activity rating scale (Marx), Knee Injury and Osteoarthritis Score (KOOS-ADL, -Sport, -QOL), and the EuroQol five dimensions questionnaire (EQ5D) at their preoperative visit. These surveys were repeated at six weeks and six months after surgery. Correlations between PRO instruments was defined as excellent (>0.7), excellent-good (0.61-0.7), good (0.4-0.6), and poor (0.2-0.3) using Spearman Correlation Coefficients. The effect size (Cohen d) and standardized response mean (SRM) were used to describe the responsiveness of each PRO at the 6 week and 6 month follow-up visits and were defined as small (0.2), medium (0.5) and large (0.8). Ceiling and floor effects were defined as present if ≥15% of participants scored the highest or lowest score on a PRO, respectively. Subgroup analyses were performed comparing change in PRO scores at follow-up between participants with and without additional arthroscopic procedures (meniscal debridement and/or repair, microfracture, or OATS vs ACL reconstruction only) using linear mixed models. Results: There were excellent and excellent-good correlations between the PROMIS PF-CAT and physical function PROs including the SF36-PF (r=0.75-0.80, p<.01), KOOS-ADL (r=0.62-0.70, p<.01) and KOOS-Sport (r=0.32-0.69, p<0.01) at most time points, respectively. There was also excellent-good correlation with the EQ5D (r=0.60-0.71, p<.01) and good correlation with the KOOS-QOL (r=0.52-0.58, p<0.01). As expected, there was no (p>0.05) to poor correlation with Marx activity (r=0.24, p<0.01) and the SF36-GH (r=0.32-0.34, p<0.01). No ceiling or floor effects were noted for the PROMIS PF-CAT; there was a ceiling effect noted for KOOS-ADL at the 6 month visit (38.1%). Effect size estimates for physical function PROs increased from small to large changes from the 6 week to 6 month visits and were largest in the PROMIS PF-CAT (1.34) followed by KOOS-ADL (1.19) and SF36-PF (1.06). Patients answered on average 4 questions utilizing the PROMIS. Baseline subgroup analyses showed no significant differences in physical function PRO scores, and at follow-up, both groups showed significant improvement in physical function PRO scores that was not statistically different. Conclusion: Our results support the construct validity of the PROMIS PF-CAT in patients who undergo ACL reconstruction. Responsiveness to change was highest by 6 months postop and greater for the PROMIS PF-CAT than for other measures of physical function with no ceiling or floor effects and a low time-burden. Taken together, these findings suggest that the PROMIS PF-CAT is a beneficial alternative to measuring and tracking changes in physical function in adults undergoing ACL reconstruction.

Use of PROMIS for Patients Undergoing Primary Total Shoulder Arthroplasty.

PubMed

Dowdle, S Blake; Glass, Natalie; Anthony, Chris A; Hettrich, Carolyn M

2017-09-01

The Patient-Reported Outcomes Measurement Information System (PROMIS) consists of question banks for health domains through computer adaptive testing (CAT). For patients with glenohumeral arthritis, (1) there would be high correlation between traditional patient-reported outcome (PRO) measures and the PROMIS upper extremity item bank (PROMIS UE) and PROMIS physical function CAT (PROMIS PF CAT), and (2) PROMIS PF CAT would not demonstrate ceiling effects. Cohort study (diagnosis); Level of evidence, 3. Sixty-one patients with glenohumeral osteoarthritis were included. Each patient completed the American Shoulder and Elbow Surgeons (ASES) assessment form, Marx Shoulder Activity Scale, Short Form-36 physical function scale (SF-36 PF), EuroQol 5 Dimensions (EQ-5D) questionnaire, Western Ontario Osteoarthritis Shoulder (WOOS) index, PROMIS PF CAT, and the PROMIS UE. Correlation was defined as high (>0.7), moderate (0.4-0.6), or weak (0.2-0.3). Significant floor and ceiling effects were present if more than 15% of individuals scored the lowest or highest possible total score on any PRO. The PROMIS PF demonstrated excellent correlation with the SF-36 PF ( r = 0.81, P < .0001) and good correlation with the ASES ( r = 0.62, P < .0001), EQ-5D ( r = 0.64, P < .001), and WOOS index ( r = 0.51, P < .01). The PROMIS PF demonstrated low correlation with the Marx scale ( r = 0.29, P = .02). The PROMIS UE demonstrated good correlation with the ASES ( r = 0.55, P < .0001), SF-36 ( r = 0.53, P < .01), EQ-5D ( r = 0.48, P < .01), and WOOS ( r = 0.34, P <.01), and poor correlation with the Marx scale ( r = 0.06, P = .62). There were no ceiling or floor effects observed. The mean number of items administered by the PROMIS PRO was 4. These data suggest that for a patient population with operative shoulder osteoarthritis, PROMIS UE and PROMIS PF CAT may be valid alternative PROs. Additionally, PROMIS PF CAT offers a decreased question burden with no ceiling effects.

Explaining drug policy: Towards an historical sociology of policy change.

PubMed

Seddon, Toby

2011-11-01

The goal of seeking to understand the development over time of drug policies is a specific version of the more general intellectual project of finding ways of explaining social change. The latter has been a preoccupation of some of the greatest thinkers within the social sciences of the last 200 years, from Foucault all the way back to the three nineteenth-century pioneers, Marx, Durkheim and Weber. I describe this body of work as 'historical sociology'. In this paper, I outline how a particular approach to historical sociology can be fruitfully drawn upon to understand the development of drug policy, using by way of illustration the example of the analysis of a recent transformation in British drug policy: the rise of the criminal justice agenda. I conclude by arguing that by looking at developments in drug policy in this way, some new insights are opened up. Copyright © 2011 Elsevier B.V. All rights reserved.

Computational electronics and electromagnetics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shang, C. C.

The Computational Electronics and Electromagnetics thrust area at Lawrence Livermore National Laboratory serves as the focal point for engineering R&D activities for developing computer-based design, analysis, and tools for theory. Key representative applications include design of particle accelerator cells and beamline components; engineering analysis and design of high-power components, photonics, and optoelectronics circuit design; EMI susceptibility analysis; and antenna synthesis. The FY-96 technology-base effort focused code development on (1) accelerator design codes; (2) 3-D massively parallel, object-oriented time-domain EM codes; (3) material models; (4) coupling and application of engineering tools for analysis and design of high-power components; (5) 3-D spectral-domainmore » CEM tools; and (6) enhancement of laser drilling codes. Joint efforts with the Power Conversion Technologies thrust area include development of antenna systems for compact, high-performance radar, in addition to novel, compact Marx generators. 18 refs., 25 figs., 1 tab.« less

Toward a Normative Theory of Freedom of the Press.

ERIC Educational Resources Information Center

Jensen, Dwight Wm.

In considering the possibility of a normative theory of freedom of the press, this paper examines arguments about such freedom in the Third World and elsewhere. Some of the arguments discussed in the paper are derived from the theories of John Locke and Karl Marx; others are drawn from the concepts of divine rights, elitism, liberal democracy, and…

Complex Langevin simulation of chiral symmetry restoration at finite baryonic density

NASA Astrophysics Data System (ADS)

Ilgenfritz, Ernst-Michael

1986-12-01

A recently proposed effective SU(3) spin model with chiral order parameter is studied by means of the complex Langevin equation. A first-order chiral symmetry restoring and deconfining transition is observed at sufficiently low temperature at finite baryonic density. Permanent address: Sektion Physik, Karl-Marx Universität, DDR-7010 Leipzig, German Democratic Republic.

EC 92: Implications for United States Trade Policy

DTIC Science & Technology

1990-04-09

38. 8. Veronique Maurus, "Le Maroc : le Nouveau Dragon aux Portes d’Europe," Le Monde (Paris), 03 November 1989, p. 9. 9. Carl Hamilton...Marx, Bernard. "What 1992 Has in Store for Europe." World Marxist Review, Vol. 32, January 1989, pp. 78-82. 33. Maurus, Veronique. "Le Maroc : le Nouveau

Education and the Reconstitution of Social Class in England

ERIC Educational Resources Information Center

Ainley, Patrick

2013-01-01

This paper extends the work of Gamble, who followed Marx in seeing a reconstitution of the reserve army of labour as a key function of capitalist crisis, but it suggests a wider class reformation that includes what can be called the middle-working/working-middle class. Education and training to all levels are deeply implicated in this class…

Karl Marx and the Paris Commune of 1871: Tracing Traditions of Critical Pedagogy

ERIC Educational Resources Information Center

McGray, Robert

2014-01-01

In 1871, citizens of the war torn arrondissements of Paris, in the face of traumatic political and military turmoil, established a new local form of government. The Paris Commune, as this government became known as in the English world, attracted attention for its alternative political-economic organization. One notable commentator was Karl Marx…

Education, Schooling, Derrida's Marx and Democracy: Some Fundamental Questions

ERIC Educational Resources Information Center

Peim, Nick

2013-01-01

Beginning with a reconsideration of what the school is and has been, this paper explores the idea of the school to come. Emphasizing the governmental role of education in modernity, I offer a line of thinking that calls into question the assumption of both the school and education as possible conduits for either democracy or social justice.…

Self-Actualization and E-Learning: A Qualitative Investigation of University Faculty's Perceived Barriers to Effective Online Instruction

ERIC Educational Resources Information Center

Oomen-Early, Jody; Murphy, Lynda

2009-01-01

Much has been written about why university faculty choose to refrain or participate in online instruction (Beaudoin, 1990; Bower, 2001; Clark, 1993; Dillon & Walsh, 1992; McKenzie, 2000; McKinnon, 1998; Paulson, 2002; Rockwell, Scheuer, Fritz, & Marx, 1999; Schifter, 2002; Wilson, 1998). Missing from the empirical knowledge base, however, are…

Socrates and Technology a New Millennium Conversation

ERIC Educational Resources Information Center

Howard, W. Gary

2006-01-01

The Socratic Method has impacted thinkers and instructors from Hegel, who moved through the negation to the negation of the negation, to Marx, who viewed history through dialectical materialism, to C.C. Langdell, who introduced case law as an innovative method to study law as a science, to present-day professors who use this method to compel…

1. AERIAL VIEW, LOOKING SOUTH, ALONG 20TH STREET NORTH WITH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. AERIAL VIEW, LOOKING SOUTH, ALONG 20TH STREET NORTH WITH EMPIRE BUILDING (CENTER RIGHT), WOODWARD BUILDING (CENTER), JOHN HAND BUILDING (TOP LEFT), BROWN MARX BUILDING (BOTTOM LEFT), THE FOUR BUILDINGS THAT COMPRISE THIS NATIONAL REGISTER HISTORIC DISTRICT - Heaviest Corner on Earth (Commercial), First Avenue, North & Twentieth (20th) Street, North, Birmingham, Jefferson County, AL

What Are the Costs of Degraded Parafoveal Previews during Silent Reading?

ERIC Educational Resources Information Center

Vasilev, Martin R.; Slattery, Timothy J.; Kirkby, Julie A.; Angele, Bernhard

2018-01-01

It has been suggested that the preview benefit effect is actually a combination of preview benefit and preview costs. Marx et al. (2015) proposed that visually degrading the parafoveal preview reduces the costs associated with traditional parafoveal letter masks used in the boundary paradigm (Rayner, 1975), thus leading to a more neutral baseline.…

Engaging in Science: A Feeling for the Discipline

ERIC Educational Resources Information Center

Jaber, Lama Z.; Hammer, David

2016-01-01

Most accounts of affect and motivation in the science education literature have discussed them as relevant to, but distinct from, disciplinary pursuits. These include Pintrich's seminal work on affective and motivational factors in learning science (P. R. Pintrich, 1999, 2003; P. R. Pintrich & E. De Groot, 1990; P. R. Pintrich, R. W. Marx,…

Honeycomb Betavoltaic Battery for Space Applications

NASA Astrophysics Data System (ADS)

Lee, Jin R.; Ulmen, Ben; Miley, George H.

2008-01-01

Radioisotopic batteries offer advantages relative to conventional chemical batteries for applications requiring a long lifetime with minimum maintenance. Thus, thermoelectric type cells fueled with Pu have been used extensively on NASA space missions. The design for a small beta battery using nickel-63 (Ni-63) and a vacuum direct collection method is described here. A honeycomb nickel wire structure is employed to achieve bi-directional direct collection by seeding Ni-63 onto honeycomb shaped wires that will provide structural support as well. The battery design is intended to power low power electronics and distribute power needs in space probes as well as space colonies. Ni-63 is chosen as the source emitter because it has a long half-life and ease of manufacturing. The use of vacuum is especially well mated to space use; hence, vacuum insulation is employed to gain a higher efficiency than prior beta batteries with a dielectric insulator. A unique voltage down-converter is incorporated to efficiently reduce the inherent output voltage from 17.4 kV to ~17.4 V. This converter operates like a ``reverse'' Marx circuit where capacitor charging occurs in series but the discharge is in parallel. The reference battery module described here is about 100 cm×100 cm×218 cm and has a power of ~10 W with a conversion efficiency of ~15.8%. These modules can be stacked for higher powers and are very attractive for various applications in space colonization due to their long life (half-life for Ni-63~100 yrs) and low maintenance.

[The philosophy of Erich Fromm. On the example of Escape from Freedom].

PubMed

Urbanek, Joanna

2006-01-01

The author makes an attempt to criticise the main assumptions of the thinking of Erich Fromm (1900-1980), the well-known German psychologist and creative continuator of the psychoanalysis current. In particular, she focuses on one of Fromm's principal works, Flight from Freedom, in which he had analysed the mechanisms inducing people to eschew independent thinking and submit to an authority demanding blind obedience. In constructing his system, he derived inspiration from the Biblical tradition, Freud and Marx, whilst approaching them critically from the very outset. Fromm has also presented his recipe for the building of a 'healthy society', based on the harmonious development of individuals in an environment permitting complete self-fulfilment within the bounds of respect for the freedom of others.

High-Trust Leadership and Blended Learning in the Age of Disruptive Innovation: Strategic Thinking for Colleges and Schools of Education

ERIC Educational Resources Information Center

Holland, Denise D.; Piper, Randy T.

2016-01-01

We introduce diverse definitions of leadership and its evolutionary history and then we integrate this idea network: strategic thinking, high-trust leadership, blended learning, and disruptive innovation. Following the lead of Marx's (2014) model of Teaching Leadership and Strategy and Rehm's (2014) model of High School Student Leadership…

Yes!: Rejoinder to "Isn't It Time We Did Something about the Lack of Teaching Preparation in Business Doctoral Programs?"

ERIC Educational Resources Information Center

Rousseau, Denise M.

2016-01-01

In this rejoinder to, "Isn't It Time We Did Something about the Lack of Teaching Preparation in Business Doctoral Programs?" (Marx, Garcia, Butterfield, Kappen, and Baldwin 2015), the author responds in agreement to the question raised regarding the lack of teaching preparation in business schools. This commentary offers suggestions to…

China Report, Red Flag, Number 13, 1 July 1982

DTIC Science & Technology

1982-08-16

used this concept in his essay "Karl Marx." He pointed out that ’Marxism "disclosed that all ideas and all the various tendencies, without exception...fields, there are plenty of academic conferences and periodicals, but the quality of some of the essays is very poor, and some studies and some...with lyrics by Zhang Shoushan [1728 1108 1472

Mark Twain: A Collection of Critical Essays. Twentieth Century Views Series.

ERIC Educational Resources Information Center

Smith, Henry Nash, Ed.

One of a series of works aimed at presenting contemporary critical opinion on major authors, this collection includes essays by Henry Nash Smith, Van Wyck Brooks, Maurice Le Breton, Kenneth Lynn, Leo Marx, Walter Blair, Daniel G. Hoffman, W. H. Auden, James M. Cox, Leslie Fiedler, Bernard DeVoto, and Tony Tanner--all dealing with the biography and…

Critical Pedagogy and the Decolonial Option: Challenges to the Inevitability of Capitalism

ERIC Educational Resources Information Center

Monzó, Lilia D.; McLaren, Peter

2014-01-01

The demise of capitalism was theoretically prophesied by Marx who posited that the world would come to such a state of destruction and human suffering that no amount of coercion or concessions would suffice to stop the massive uprisings that would lead us into a new socialist alternative. Although the downfall of world capitalism may seem…

The Productivity of Students' Schoolwork: An Exercise in Marxist Rigour

ERIC Educational Resources Information Center

Baldino, Roberto Ribeiro; Cabral, Tânia Cristina Baptista

2013-01-01

In this article we will use central elements in Mature Marx's theory of productive labour to prove that not only the work of teachers and staff but also the expenditure of students' muscles and nerves is productive labour. This theme has some intersection with the work of housewives that autonomist Marxism asserts to be productive labour…

Marxist Thought: Still Primus Inter Pares for Understanding and Opposing the Capitalist System

ERIC Educational Resources Information Center

Brosio, Richard A.

2008-01-01

In this article, the author attempts to examine Marx's humanist commitment, and with it a belief in human volition--or agency (Brosio 1985, passim). Collective agency is necessary for attempts to rescue society and its schools from the latest, namely neo-liberal, capitalist attack on working people and the possibilities for the achieving deep and…

Coming to Critical Pedagogy: A Marxist Autobiography in the History of Higher Education

ERIC Educational Resources Information Center

Malott, Curry Stephenson

2014-01-01

In this essay Malott traces his journey to critical pedagogy focusing on a significant element of his family's ethnic and class background and its connection to his own educational experiences from public schooling to university. Drawing on Marx's historical discussions at the end of Volume 1 of "Capital" Malott traces his own…

Toward a Broader Dialectic: Joining Marxism with Mailer to Forge a Multilectics That Advances Teaching and Learning

ERIC Educational Resources Information Center

Fellner, Gene

2014-01-01

I contrast the lenses that Norman Mailer, Herbert Marcuse, and Karl Marx bring to their analyses of social life, exploring the contributions and limits of their respective approaches. I then propose what I call a "multilectical" theoretical lens that encompasses the strengths of all three and leans on the insights of post-Marxist…

Transmission-line-circuit model of an 85-TW, 25-MA pulsed-power accelerator

NASA Astrophysics Data System (ADS)

Hutsel, B. T.; Corcoran, P. A.; Cuneo, M. E.; Gomez, M. R.; Hess, M. H.; Hinshelwood, D. D.; Jennings, C. A.; Laity, G. R.; Lamppa, D. C.; McBride, R. D.; Moore, J. K.; Myers, A.; Rose, D. V.; Slutz, S. A.; Stygar, W. A.; Waisman, E. M.; Welch, D. R.; Whitney, B. A.

2018-03-01

We have developed a physics-based transmission-line-circuit model of the Z pulsed-power accelerator. The 33-m-diameter Z machine generates a peak electrical power as high as 85 TW, and delivers as much as 25 MA to a physics load. The circuit model is used to design and analyze experiments conducted on Z. The model consists of 36 networks of transmission-line-circuit elements and resistors that represent each of Zs 36 modules. The model of each module includes a Marx generator, intermediate-energy-storage capacitor, laser-triggered gas switch, pulse-forming line, self-break water switches, and tri-plate transmission lines. The circuit model also includes elements that represent Zs water convolute, vacuum insulator stack, four parallel outer magnetically insulated vacuum transmission lines (MITLs), double-post-hole vacuum convolute, inner vacuum MITL, and physics load. Within the vacuum-transmission-line system the model conducts analytic calculations of current loss. To calculate the loss, the model simulates the following processes: (i) electron emission from MITL cathode surfaces wherever an electric-field threshold has been exceeded; (ii) electron loss in the MITLs before magnetic insulation has been established; (iii) flow of electrons emitted by the outer-MITL cathodes after insulation has been established; (iv) closure of MITL anode-cathode (AK) gaps due to expansion of cathode plasma; (v) energy loss to MITL conductors operated at high lineal current densities; (vi) heating of MITL-anode surfaces due to conduction current and deposition of electron kinetic energy; (vii) negative-space-charge-enhanced ion emission from MITL anode surfaces wherever an anode-surface-temperature threshold has been exceeded; and (viii) closure of MITL AK gaps due to expansion of anode plasma. The circuit model is expected to be most accurate when the fractional current loss is small. We have performed circuit simulations of 52 Z experiments conducted with a variety of accelerator configurations and load-impedance time histories. For these experiments, the apparent fractional current loss varies from 0% to 20%. Results of the circuit simulations agree with data acquired on 52 shots to within 2%.

Zur Frage der Textauswahl in einem Lesekurs fuer die Sozialwissenschaften (On the Question of the Choice of Textbooks in a Course in the Social Sciences)

ERIC Educational Resources Information Center

Apelt, Hans-Peter

1974-01-01

Passages from three selected samples of textbooks are used to show what requirements are made of textbooks in the social sciences. Some hints are given to the teacher for converting reading suggestions into instructional material. Short texts from Karl Marx are also suggested. (Text is in German.) (IFS/WGA)

Southeast Asia Report, No. 1299.

DTIC Science & Technology

1983-06-14

IMPACT INTERNATIONAL magazine, London, issued between 13-26 May this year, the International Conference on Karl Marx was designed for Communist Party...reported by the Longon-based IMPACT IN- TERNATIONAL magazine) indicated that the communists still continued to mobilize the world’s communist...FOREIGN TRAWLERS SEIZED—Jakarta, 13 May (ANTARA-OANA)—Eleven Taiwanese fishing trawlers have been held for fish poaching in Indonesian waters within a

Interpretation du choix de carriere de la femme dans une perspective sociologique. (Interpretation of the Career Choices of Women from a Sociological Perspective).

ERIC Educational Resources Information Center

Gagne, Evelyn; Poirier, Pierre

1985-01-01

Examines the career choices and aspirations of women in two contexts: social divergency theories derived from Marx and Simmel, and personal symbolization theories based on George Mead's writings. Presents a series of propositions to help formulate a coherent social theory about women's career choices, supported by empirical confirmation. (AYC)

Compilation of 1990 Annual Reports of the Navy ELF Communications System Ecological Monitoring Program. Volume 1. Tabs A, B.

DTIC Science & Technology

1991-08-01

Site 18.0 8.4 9.2 8.6 21.2 I------- P Value------------------ Cal Mg2 K3 N 4 P5 With Covariates Site .193 .180 .472 .478 .113 Year .000 .000 .000...microbial population composition through production and excretion of compounds such as antibiotics, vitamins , amino acids, and hormones (Marx 1982, Keast and

A Deeper Dig: Rejoinder to "Isn't It Time We Did Something about the Lack of Teaching Preparation in Business Doctoral Programs?"

ERIC Educational Resources Information Center

Lewicki, Roy J.; Bailey, James

2016-01-01

The authors of this rejoinder to "Isn't It Time We Did Something about the Lack of Teaching Preparation in Business Doctoral Programs?" (Marx, Garcia, Butterfield, Kappen, and Baldwin 2015), were invited to respond as a result of their analyses of dominant faculty recognition paradigms and questioning of their intellectual foundations.…

In Conversation with Mark Olssen: On Foucault with Marx and Hegel

ERIC Educational Resources Information Center

Raaper, Rille; Olssen, Mark

2017-01-01

It is challenging to define who Michel Foucault was, whether he was a theorist, a philosopher, a historian, or a critic. In many of his books, and essays, Foucault denied being a philosopher or a theorist, nor did he want to be called a writer or a prophet. He described himself as an experimenter by saying that his work simply consists of…

Future-Focused Leadership: Preparing Schools, Students, and Communities for Tomorrow's Realities

ERIC Educational Resources Information Center

Marx, Gary

2006-01-01

If you've ever thought that you should spend less time reacting to events and more time anticipating changes that lurk just around the corner, then here's a book that gives you the ideas and vision you need to be a future-focused leader. Drawing from demographic trends and timeless wisdom, author Gary Marx outfits you with a living strategy that…

Use of PROMIS for Patients Undergoing Primary Total Shoulder Arthroplasty

PubMed Central

Dowdle, S. Blake; Glass, Natalie; Anthony, Chris A.; Hettrich, Carolyn M.

2017-01-01

Background: The Patient-Reported Outcomes Measurement Information System (PROMIS) consists of question banks for health domains through computer adaptive testing (CAT). Hypothesis: For patients with glenohumeral arthritis, (1) there would be high correlation between traditional patient-reported outcome (PRO) measures and the PROMIS upper extremity item bank (PROMIS UE) and PROMIS physical function CAT (PROMIS PF CAT), and (2) PROMIS PF CAT would not demonstrate ceiling effects. Study Design: Cohort study (diagnosis); Level of evidence, 3. Methods: Sixty-one patients with glenohumeral osteoarthritis were included. Each patient completed the American Shoulder and Elbow Surgeons (ASES) assessment form, Marx Shoulder Activity Scale, Short Form–36 physical function scale (SF-36 PF), EuroQol 5 Dimensions (EQ-5D) questionnaire, Western Ontario Osteoarthritis Shoulder (WOOS) index, PROMIS PF CAT, and the PROMIS UE. Correlation was defined as high (>0.7), moderate (0.4-0.6), or weak (0.2-0.3). Significant floor and ceiling effects were present if more than 15% of individuals scored the lowest or highest possible total score on any PRO. Results: The PROMIS PF demonstrated excellent correlation with the SF-36 PF (r = 0.81, P < .0001) and good correlation with the ASES (r = 0.62, P < .0001), EQ-5D (r = 0.64, P < .001), and WOOS index (r = 0.51, P < .01). The PROMIS PF demonstrated low correlation with the Marx scale (r = 0.29, P = .02). The PROMIS UE demonstrated good correlation with the ASES (r = 0.55, P < .0001), SF-36 (r = 0.53, P < .01), EQ-5D (r = 0.48, P < .01), and WOOS (r = 0.34, P <.01), and poor correlation with the Marx scale (r = 0.06, P = .62). There were no ceiling or floor effects observed. The mean number of items administered by the PROMIS PRO was 4. Conclusion: These data suggest that for a patient population with operative shoulder osteoarthritis, PROMIS UE and PROMIS PF CAT may be valid alternative PROs. Additionally, PROMIS PF CAT offers a decreased question burden with no ceiling effects. PMID:28944248

On the Call for Action: Rejoinder to "Isn't It Time We Did Something about the Lack of Teaching Preparation in Business Doctoral Programs?"

ERIC Educational Resources Information Center

Le, Dianne

2016-01-01

Marx, Garcia, Butterfield, Kappen, and Baldwin (2015) lament the current state of affairs where there is sparse and inconsistent teaching preparation across business doctoral programs. The authors refute the idea that teaching is solely an art to be acquired rather than a skill to be learned. They explore the legacy rewards system--incentives…

Project VALOR: Trajectories of Change in PTSD in Combat-Exposed Veterans

DTIC Science & Technology

2015-10-01

Affairs electronic records of Iraq and Afghanistan veterans. Journal of consulting and clinical psychology , 82(4), 569. PRESENTATIONS Barretto...Veterans. Poster presented at the 49th Annual Meeting of the Association of Behavioral and Cognitive Therapies, Chicago, IL. Bovin, M. J., Marx, B...comparison of Operation Iraqi Freedom Deployment Phases. Poster presented at the 49th Annual Meeting of the Association of Behavioral and Cognitive

NOAA Climate Test Bed: CFSv.3 Planning Meeting (August 25-26, 2011)

Science.gov Websites

: Experience of porting CFSv2 NASA Ames SGI ICE platform (Marx) 12:30-14:00 Breakout discussion (1) Group 1A :00 NASA (Suarez) 09:00-09:20 GFDL (Rosati) 09:20-09:40 ECMWF (Molteni) 09:40-10:00 CMCC (Navarra) 10 modeling efforts at other modeling centers (e.g., GFDL, NCAR, NASA, COLA, DOE, ECMWF). Meeting Format: The

The 12th Annual International Meeting on Simulation Healthcare (IMSH) 2012

DTIC Science & Technology

2012-03-01

Title: Videorecording of Simulated Technical Errors as an Instructional Modality in a Central Venous Catheterization Course Sub Content: Knowledge...bedside procedures, such as insertion of peripheral and central venous catheters, are performed routinely by a wide spectrum of healthcare providers...with Chest Tubes and a Central Venous Line Monday January 30th 2012 4:00 pm – 5:15 pm Training Education and Assessment Shelby Marx, Donald

High Voltage, Low Inductance Hydrogen Thyratron Study Program.

DTIC Science & Technology

1981-01-01

E-E Electrode Spacing Ef Cathode Heater Voltage egy Peak Forward Grid Voltage epy Peak Forward Anode Voltage epx Peak Inverse Anode Voltage Eres... electrodes . ........... 68 30 Marx generator used for sample testing. ........... 68 31 Waveforms showing sample holdoff and sample breakdown 73 32...capability (a function of gas pressure and electrode spacing) could be related to its current rise time capability (a function of gas pressure and inductance

JPRS Report, Soviet Union, World Economy & International Relations, No. 10, October 1988

DTIC Science & Technology

1989-02-10

essence of the capitalist mode of production and via the decomposition of the Ricardian school, which became, according to Marx, the "vulgar apologists...the framework of the accepted limitations) if it is seen as a model reflecting quantitatively the participation or role of individual production ...From the viewpoint of a characteriza- tion of modern capitalist production the models of general balance proceeded from unrealistic premises: they

JPRS Report China

DTIC Science & Technology

1988-10-03

in Yunnan Province 38 Identification of Mycotoxins in Shaanxi Livestock Fodder 41 Aflotoxin Contamination of Peanut Products Surveyed 41 New Test...changes in man-to-man relations. It is said that the law of value is being used to effect the economic reform and to guide production, but frequently...Marx in his days. It has realized the defects in its very system and has by itself effected adjustments. Since the great economic crash and

On "White Supremacy" and Caricaturing, Misrepresenting and Dismissing Marx and Marxism: A Response to David Gillborn's "Who's Afraid of Critical Race Theory in Education".

ERIC Educational Resources Information Center

Cole, Mike

2009-01-01

In this journal in 2007, the author and Alpesh Maisuria critiqued two central tenets of Critical Race Theory (CRT) from a Marxist perspective (Cole and Maisuria, 2007). These are its primacy of "race" over class, and its concept of "white supremacy". Part of the critique focused on the work of leading UK Critical Race Theorist,…

JPRS Report, China.

DTIC Science & Technology

1991-07-12

of thinking is different. This also Mikhailovski who tightly embraced the method of "sub- demonstrates the cruelty of the struggle. It would not...early days of libera- thinking?" (Selected Works of Marx and Engels Vol 3, p tion-we could not or did not feel free to seek truth from 533) Indeed...because he declares that individual with opportunities of free competition which, such "universal love" means "loving everyone, including by crashing the

Designing for Inter-Organizational Coordination in Indonesia’s Maritime Domain

DTIC Science & Technology

2014-12-01

the-week distribution (Figure 24), the concentration of accidents appears to take place Tuesday tln·ough Saturday, with the percentage well above 13...incidents. Meanwhile, the peak takes place on Tuesday to Thursday as shown in the Figure 51 below. Figure 51. Violations at sea time wheel (Data from...outlook: Southeast Asia 2008–2009. Singapore: ISEAS Publishing. Larsen, Richard J. & Marx, Morris L. (1981). An introduction to mathematical

A Hierarchy of Needs in International Relations

DTIC Science & Technology

2009-03-01

partner, and confidant while keeping life relatively normal for our two girls . Pam did not know she would have to read all of my papers and...2008). 59 Charles J. Wheelan, Naked Economics: Undressing the Dismal Science, 1st ed. (New York: Norton, 2002), 19. 60 Ibid., 36. 27...London: W. Reeves, 1888), 31, http://ebooks.adelaide.edu.au/m/marx/karl/m39c/ (accessed October 31, 2008). 63 Wheelan, Naked Economics: Undressing the

USSR Report, Political and Sociological Affairs.

DTIC Science & Technology

1984-03-15

national liberation move- ment. Modern education and freedom of the press promoted national awa- kening and led to the formation, as Marx put it, of...predominance of the poperfied classes, especially the bourgeois upper crust, over the popular masses. Their awa- kening and emancipation from medie- val...Aden not only as a military base to protect their in- terests in the Middle East, and as an excellent merchant port, but also as an outpost for

JPRS Report West Europe

DTIC Science & Technology

1988-10-12

in French 8 Jul 88 pp 40-41 [Article by Jacques Gevers: "The Optimistic Mandarin"] [Text] Bourgeois childhood and social fiber, loyalty to Marx and...recently tabled by the govern- ment. Flanked by the two ministers of institutional reforms, Philippe Moureaux and Jean Luc Dehaene, he then presented the...executive and its shift to a proportional system. As for Jean Luch Dehaene, he particularly stressed the need for cooperation among the various levels of

The International Context of Teacher Preparation: Rejoinder to "Isn't It Time We Did Something about the Lack of Teaching Preparation in Business Doctoral Programs?"

ERIC Educational Resources Information Center

Gibbs, Graham

2016-01-01

This paper, a rejoinder to "Isn't It Time We Did Something about the Lack of Teaching Preparation in Business Doctoral Programs?" by Marx et al., suggests glancing at practices outside the United States to get some perspective on the nature of the problem of why so little emphasis is placed on teaching preparation in business doctoral…

3. EXTERIOR/STREET LEVEL VIEW, LOOKING WEST ALONG FIRST AVENUE NORTH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. EXTERIOR/STREET LEVEL VIEW, LOOKING WEST ALONG FIRST AVENUE NORTH WITH (LEFT TO RIGHT) CALDWELL-MILNER, MCADORY, JOHN HAND, WOODWARD BUILDINGS AND BROWN MARX BUILDING (RIGHT). ALSO PICTURED IS THE BANK FOR SAVINGS BUILDING (TOP RIGHT) AND THE RAILROAD RESERVATION (TOP LEFT TO RIGHT). VIEW TAKEN AS CITY THAWS FROM A MARCH BLIZZARD. - Heaviest Corner on Earth (Commercial), First Avenue, North & Twentieth (20th) Street, North, Birmingham, Jefferson County, AL

On Being Holier-Than-Thou: A Critique of Curry Malott's "Pseudo-Marxism and the Reformist Retreat from Revolution"

ERIC Educational Resources Information Center

McGrew, Ken

2011-01-01

In the May 2011 edition of this journal, Curry Malott contributed an essay review of Jean Anyon's "Marx and Education" (2011). The author would summarize Mallot's critiques of her book as follows: (1) she didn't write the book that he wanted her to write; (2) she didn't cite the authors that he wanted her to cite; and (3) her work is anti-Marxist…

Beta-Test Data On An Assessment Of Textbook Problem Solving Ability: An Argument For Right/Wrong Grading?

NASA Astrophysics Data System (ADS)

Cummings, Karen; Marx, Jeffrey D.

2010-10-01

We have developed an assessment of students' ability to solve standard textbook style problems and are currently engaged in the validation and revision process. The assessment covers the topics of force and motion, conservation of momentum and conservation of energy at a level consistent with most calculus-based, introductory physics courses. This tool is discussed in more detail in an accompanying paper by Marx and Cummings. [1] Here we present preliminary beta-test data collected at four schools during the 2009/2010 academic year. Data include both pre- and post-instruction results for introductory physics courses as well as results for physics majors in later years. In addition, we present evidence that right/wrong grading may well be a perfectly acceptable grading procedure for a course-level assessment of this type.

Advice Networks and Local Diffusion of Technological Innovations

NASA Astrophysics Data System (ADS)

Barahona, Juan Carlos; Pentland, Alex Sandy

Classical writers such as John Stuart Mill and Karl Marx speculated that the standard of living could not rise indefinitely unless advances in technology increased the yield of the means of production. Neoclassical growth theory, based on capital accumulation, supports this intuition [1]. Digital tools increase personal productivity. Communication technologies enhance the coordination among individuals and increase the efficacy and efficiency of collective efforts. In both ways, technology contributes with wealth creation and the overall welfare of the community.

Federal Republic of Germany, A Country Study.

DTIC Science & Technology

1982-02-01

pride. The works of Martin Luther, Immanuel Kant, Ludwig van Beethoven, Johann Wolfgang von Goethe, Karl Marx, Sigmund Freud, and Albert Einstein may...alliance between the Old Army and the republic and provided impetus for political radicalization. Wolfgang Kapp’s right-wing coup was aborted by the...the republic’s name evoked memories of Weimar’s native son and German literary giant, Johann Wolfgang von Goe- the, and of the nation’s humanistic

Translations on Eastern Europe, Political, Sociological, and Military Affairs, Number 1435

DTIC Science & Technology

1977-08-23

4 . K. Marx/F. Engels, "Werke" (Works), Vol 4 , Berlin, 1959, p 479. 5 . Cf. PRAVDA, Moscow, 9 October 1976. 6. Ibid. 45 7... live there, i.a., in the 35,000 newly built apartments. The new district is divided into three viable housing areas, with the main center being...biggest tenement houses of the world. 4 ®) In addition to new construction of housing, great attention must therefore be devoted to the

Project VALOR: Trajectories of Change in PTSD in Combat-Exposed Veterans

DTIC Science & Technology

2016-10-01

Behavioral and Cognitive Therapy 50th Annual Meeting. New York, NY. Black, S. K., Erb, S. Green, J. D., Bovin, M., Sloan, D. M., & Marx, B. (November...reactivity and regulation in PTSD; Chair: K. McHugh) at the Association for Behavioral and Cognitive Therapies 49th Annual Meeting. Chicago, IL. Black, S. K...comparison of OIF deployment phases. Poster presented at the Association for Behavioral and Cognitive Therapies 49th Annual Meeting. Chicago, IL

Control of Morphology of Crystallizable Polymer Mixtures via Manipulation of the Heterogeneous Melt

DTIC Science & Technology

1990-11-09

Distribution of Matrix Homopolymer C.V. Berney in Block Copolymers of Spherical P. Cheng Morphology R.E. Cohen 2. Distribution of Chain Ends Inside P. Cheng...the Polybutadiene Microspheres of SB C.V. Berney Diblock Copolymers R.E. Cohen 3. Spatial Organization of Homopolymer P. Cheng Chains Inside Spherical...Polybutadiene C.V. Berney Domains of SB Diblock Copolymers R.E. Cohen 4. Blends of Crystallizable Polybutadienes M. Marx R.E. Cohen 5. Synthesis and

Operational Characteristics of a High Voltage Dense Plasma Focus.

DTIC Science & Technology

1985-11-01

A high voltage dense plasma focus powered by a single-stage Marx bank was designed, built and operated. The maximum bank parameters are: voltage--120...kV, energy--20 kJ, short-circuit current--600kA. The bank impedance is about 200 millohms. The plasma focus center electrode diameter is 1.27 cm. The...about 50 milliohms. The context of this work is established with a review of previous plasma focus theoretical, experimental and computational work and

Contemporary Cuban Physics Through Scientific Publications: An Insider’s View

NASA Astrophysics Data System (ADS)

Altshuler, Ernesto

In a previous paper, the author reached some conclusions on the tendencies of the publications by Cuban physicists in international journals (Altshuler, Rev Cub Fís 22(2):173-182, 2005) and called for a systematic bibliometric study of the subject. Such a study has now been undertaken (a contribution to this volume entitled "Physics in Cuba from the Perspective of Bibliometrics" by Werner Marx and Manuel Cardona, referred to in this paper as Marx and Cardona) and supports the main conclusions of the former work. The scenario of Cuban physics since 1995 has been conditioned by two main facts interacting in a nontrivial way: the serious material shortages affecting local physics laboratories and bibliographic resources, and an increase in the country's international collaboration. As a positive result, the total volume of Cuban publications in international physics journals has increased since 1995, perhaps reaching a peak around the year 2000, while the number of citations of Cuban papers and the impact of the journals in which they were published have continued to increase since the mid-1990s. Theoretical work produced by physicists from a number of Cuban institutions in international collaborations strongly contribute to those numbers. In the last years, international publications suggest a `self-organized' opening of Cuban physics towards interdisciplinary subjects, which is increasing the `bibliometric visibility' of autochthonous experimental work.

Coiled transmission line pulse generators

DOEpatents

McDonald, Kenneth Fox

2010-11-09

Methods and apparatus are provided for fabricating and constructing solid dielectric "Coiled Transmission Line" pulse generators in radial or axial coiled geometries. The pour and cure fabrication process enables a wide variety of geometries and form factors. The volume between the conductors is filled with liquid blends of monomers, polymers, oligomers, and/or cross-linkers and dielectric powders; and then cured to form high field strength and high dielectric constant solid dielectric transmission lines that intrinsically produce ideal rectangular high voltage pulses when charged and switched into matched impedance loads. Voltage levels may be increased by Marx and/or Blumlein principles incorporating spark gap or, preferentially, solid state switches (such as optically triggered thyristors) which produce reliable, high repetition rate operation. Moreover, these Marxed pulse generators can be DC charged and do not require additional pulse forming circuitry, pulse forming lines, transformers, or an a high voltage spark gap output switch. The apparatus accommodates a wide range of voltages, impedances, pulse durations, pulse repetition rates, and duty cycles. The resulting mobile or flight platform friendly cylindrical geometric configuration is much more compact, light-weight, and robust than conventional linear geometries, or pulse generators constructed from conventional components. Installing additional circuitry may accommodate optional pulse shape improvements. The Coiled Transmission Lines can also be connected in parallel to decrease the impedance, or in series to increase the pulse length.

Development of cable fed flash X-ray (FXR) system

NASA Astrophysics Data System (ADS)

Menon, Rakhee; Mitra, S.; Patel, A. S.; Kumar, R.; Singh, G.; Senthil, K.; Kumar, Ranjeet; Kolge, T. S.; Roy, Amitava; Acharya, S.; Biswas, D.; Sharma, Archana

2017-08-01

Flash X-ray sources driven by pulsed power find applications in industrial radiography, and a portable X-ray source is ideal where the radiography needs to be taken at the test site. A compact and portable flash X-ray (FXR) system based on a Marx generator has been developed with the high voltage fed to the FXR tube via a cable feed-through arrangement. Hard bremsstrahlung X-rays of few tens of nanosecond duration are generated by impinging intense electron beams on an anode target of high Z material. An industrial X-ray source is developed with source size as low as 1 mm. The system can be operated from 150 kV to 450 kV peak voltages and a dose of 10 mR has been measured at 1 m distance from the source window. The modeling of the FXR source has been carried out using particle-in-cell and Monte Carlo simulations for the electron beam dynamics and X-ray generation, respectively. The angular dose profile of X-ray has been measured and compared with the simulation.

Local Hamiltonian Monte Carlo study of the massive schwinger model, the decoupling of heavy flavours

NASA Astrophysics Data System (ADS)

Ranft, J.

1983-12-01

The massive Schwinger model with two flavours is studied using the local hamiltonian lattice Monte Carlo method. Chiral symmetry breaking is studied using the fermion condensate as order parameter. For a small ratio of the two fermion masses, degeneracy of the two flavours is found. For a large ratio of the masses, the heavy flavour decouples and the light fermion behaves like in the one flavour Schwinger model. On leave from Sektion Physik, Karl-Marx-Universität, Leipzig, GDR.

Implications of Integrating Women into the Marine Corps Infantry

DTIC Science & Technology

2015-01-01

account by the research. 17 Guy L. Siebold, “The Essence of Military Group Cohesion,” Armed Forces and Society, Vol. 33, No. 2, January 1, 2007, pp...assignment of female personnel reveals a dearth of critical mass concepts: 24 Jasmin Joecks, Kerstin Pull, and Karin Vetter, “Gender Diversity in the...Personnel Psychology, Vol. 60, No. 2, 2007, pp. 303–335. 42 David M. Marx and Jasmin S. Roman, “Female Role Models: Protecting Women’s Math Test

6-7 Mev Characteristic Gamma-Ray Source Using A Plasma Opening Switch And A Marx Bank

DTIC Science & Technology

2011-06-01

of Hawk, including the POS, is shown in Fig. 2a. The POS consists of 12 plasma guns made from coaxial cables that inject ionized plasma radially...inward between two coaxial conductors prior to firing the generator. The POS plasma conducts the generator current as a short circuit for about 700...vacuum gap in the plasma . High-energy electron- and ion-beams form in the plasma -filled coaxial region, with ions from the plasma and the polyethylene

Himmelsfotografie MIT Schmidt-Teleskopen

NASA Astrophysics Data System (ADS)

Marx, Siegfried; Pfau, Werner

Auf dem Höhepunkt der Verbreitung und astronomischen Anwendung von Schmidt-Teleskopen legen S. Marx und W. Pfau einen reich illustrierten Bildband zu diesem Fernrohrtyp vor. Der thematische Bogen reicht von der Teleskoptechnik und ihrer Geschichte über das Leben von Berhard Schmidt bis zu den schönsten, hier in hervorragender Qualität wiedergegebenen Himmelsaufnahmen und ihrer wissenschaftlichen Interpretation. Praktische Hinweise zu eigener fotografischer Tätigkeit und ein Glossar machen das Buch nützlich für jeden Liebhaber der Himmelskunde.

European Science Notes Information Bulletin Report on Current European/ Middle Eastern Science

DTIC Science & Technology

1990-08-01

evolved from pulse- power research activities generators charged by low-inductance, Marx-bank dating from the early 1960s at the Institute of Nuclear...Pulse Power at ISE tion rates up to 25 Hz. While I saw one of these gener- ators at ISE hooked to a microwave generator and The ISE has a very active ...program on repetitive pulse photographs for a commercial brochure, I have not seen power based upon oil-dielectric transformer technology, the output

Present and Future Security Challenges in Northern Europe

DTIC Science & Technology

2002-04-09

mixture of Kant, Hegel, Bentham, Spencer and Nietzsche , with Marx conveniently left out of the mix, portended the elimination of time and space and the...unthreatened, turn "Nelson’s Eye" toward Northern Europe’s plight? NATO’s Article V (the mutual defense clause) is not viable without a "Firm Sea Power...first article , he asserts that professional armies should be abolished. Today, they are being re-introduced throughout Europe. In his fourth article , he

A Service in Transition: Forging an Integrated Institutional Identity for the United States Air Force

DTIC Science & Technology

2010-06-01

Jr (Bomber) o Seventh Air Force, LTG Jeffrey A. Remington (Fighter) o Eleventh Air Force, LTG Dana T. Atkins (Fighter) o Thirteenth Air Force, LTG...Acculturation.‖ In Handbook of Socialization: Theory and Research, edited by Joan E. Grusec, and Paul D. Hastings, 543-560. New York, NY: Guilford...Philip. ―Determinism and Indeterminacy in the History of Technology.‖ In Does Technology Drive History?, edited by Merritt Roe Smith, and Leo Marx

China Report, Red Flag, No. 8, 16 April 1983

DTIC Science & Technology

1983-07-01

teachers in our country rank very low in both their pay and social position. So, no one is willing to be a pri- mary school teacher. Unqualified ...man’s knowledge of natural laws brings with it increases in man’s means to exert an effect on the natural world." ("Collected Works of Marx and Engels...the wealth of human knowledge and the new knowledge and fruits of contemporary science and culture. Freedom cannot be 11 attained until the law of

Performance of PROMIS Instruments in Patients With Shoulder Instability.

PubMed

Anthony, Chris A; Glass, Natalie A; Hancock, Kyle; Bollier, Matt; Wolf, Brian R; Hettrich, Carolyn M

2017-02-01

Shoulder instability is a relatively common condition occurring in 2% of the population. PROMIS (Patient-Reported Outcome Measurement Information System) was developed by the National Institutes of Health in an effort to advance patient-reported outcome (PRO) instruments by developing question banks for major health domains. To compare PROMIS instruments to current PRO instruments in patients who would be undergoing operative intervention for recurrent shoulder instability. Cohort study (diagnosis); Level of evidence, 2. A total of 74 patients with a primary diagnosis of shoulder instability who would be undergoing surgery were asked to fill out the American Shoulder and Elbow Surgeons shoulder assessment form (ASES), Marx shoulder activity scale (Marx), Short Form-36 Health Survey Physical Function subscale (SF-36 PF), Western Ontario Shoulder Instability Index (WOSI), PROMIS physical function computer adaptive test (PF CAT), and PROMIS upper extremity item bank (UE). Correlation between PRO instruments was defined as excellent (>0.7), excellent-good (0.61-0.7), good (0.4-0.6), and poor (0.2-0.3). Utilization of the PROMIS UE demonstrated excellent correlation with the SF-36 PF ( r = 0.78, P < .01) and ASES ( r = 0.71, P < .01); there was excellent-good correlation with the EQ-5D ( r = 0.66, P < .01), WOSI ( r = 0.63, P < .01), and PROMIS PF CAT ( r = 0.63, P < .01). Utilization of the PROMIS PF CAT demonstrated excellent correlation with the SF-36 PF ( r = 0.72, P < .01); there was excellent-good correlation with the ASES ( r = 0.67, P < .01) and PROMIS UE ( r = 0.63, P < .01). When utilizing the PROMIS UE, ceiling effects were present in 28.6% of patients aged 18 to 21 years. Patients, on average, answered 4.6 ± 1.8 questions utilizing the PROMIS PF CAT. The PROMIS UE and PROMIS PF CAT demonstrated good to excellent correlation with common shoulder and upper extremity PRO instruments as well as the SF-36 PF in patients with shoulder instability. In patients aged ≤21 years, there were significant ceiling effects utilizing the PROMIS UE. While the PROMIS PF CAT appears appropriate for use in adults of any age, our findings demonstrate that the PROMIS UE has significant ceiling effects in patients with shoulder instability who are ≤21 years old, and we do not recommend use of the PROMIS UE in this population.

Assessment of demographic and pathoanatomic risk factors in recurrent patellofemoral instability.

PubMed

Hiemstra, Laurie Anne; Kerslake, Sarah; Lafave, Mark

2017-12-01

The WARPS/STAID classification employs clinical assessment of presenting features and anatomic characteristics to identify two distinct subsets of patients within the patellofemoral instability population. The purpose of this study was to further define the specific demographics and the prevalence of risky pathoanatomies in patients classified as either WARPS or STAID presenting with recurrent patellofemoral instability. A secondary purpose was to further validate the WARPS/STAID classification with the Banff Patella Instability Instrument (BPII), the Marx activity scale and the Patellar Instability Severity Score (ISS). A convenience sample of 50 patients with recurrent patellofemoral instability, including 25 WARPS and 25 STAID subtype patients, were assessed. Clinical data were collected including assessment of demographic risk factors (sex, BMI, bilaterality of symptoms, affected limb side and age at first dislocation) and pathoanatomic risk factors (TT-TG distance, patella height, patellar tilt, grade of trochlear dysplasia, Beighton score and rotational abnormalities of the tibia or femur). Patients completed the BPII and the Marx activity scale. The ISS was calculated from the clinical assessment data. Patients were stratified into the WARPS or STAID subtypes for comparative analysis. An independent t test was used to compare demographics, the pathoanatomic risk factors and subjective measures between the groups. Convergent validity was tested with a Pearson r correlation coefficient between the WARPS/STAID and ISS scores. Demographic risk factors statistically associated with a WARPS subtype included female sex, age at first dislocation and bilaterality. Pathoanatomic risk factors statistically associated with a WARPS subtype included trochlear dysplasia, TT-TG distance, generalized ligamentous laxity, patellar tilt and rotational abnormalities. The independent t test revealed a significant difference between the ISS scores: WARPS subtype (M = 4.4, SD = 1.1) and STAID subtype (M = 2.5, SD = 1.5); t(48) = 5.2, p < 0.001. The relationship between the WARPS/STAID and the ISS scores, measured using a Pearson r correlation coefficient, demonstrated a strong relationship: r = -0.61, n = 50, p < 0.001. This study has demonstrated statistically significant evidence that certain demographics and pathoanatomies are more prevalent in each of the WARPS and STAID patellofemoral instability subtypes. There was no difference in quality-of-life or activity level between the subtypes. The WARPS/STAID score demonstrated convergent validity to the ISS and divergent validity to the BPII score and the Marx activity scale. This study has further validated both the WARPS/STAID classification and the ISS of patients that present with recurrent patellofemoral instability. III.

Impact of duration of contact lens wear on the structure and function of the meibomian glands.

PubMed

Alghamdi, Waleed M; Markoulli, Maria; Holden, Brien A; Papas, Eric B

2016-03-01

To investigate the effects of the duration of contact lens (CL) wear on the meibomian glands (MGs), eyelid and tear film. This was a cross-sectional study of CL wearers and non-wearers (NWs) aged between 18 and 35 years. The sample comprised of: (i) Three groups of CL wearers of different duration profiles (short, moderate and long experience of CL wear); (ii) a group of previous CL wearers (PWs) who had ceased wear for at least 6 months prior to the present study; (iii) healthy non-wearers as a control group. Study procedures were conducted in the order from least invasive to most invasive as follows: symptom assessment, lipid assessment, non-invasive break-up time, tear meniscus area, tear osmolarity and evaporation, Phenol red thread, MG expressibility, ocular surface and eyelid assessments, meibography, Marx line and lid wiper assessment using lissamine green. For statistical comparison of continuous data, one-way analysis of variance was used with Bonferroni post-hoc correction, where appropriate. Kruskal-Wallis test and Pearson Chi-Square respectively were used for ordinal and categorical variables. A total of 100 participants (49 males and 51 females; mean age ± SD: 25.4 ± 4.1) were enrolled across the five groups, such that each was composed of 20 age/sex matched individuals. Significant differences between the study groups were found for MG expressibility (p < 0.001), number of plugged orifices (p = 0.001), number of expressed orifices (p < 0.001), MG dropout (p = 0.001), Marx line score (p < 0.001), palpebral redness (p = 0.003), and roughness (p = 0.002), non-invasive break-up time (p < 0.001), Phenol red thread (p = 0.005), and tear meniscus area (p = 0.029). For all these variables, the NW group was statistically different from all other groups. Duration of wear was not a significant factor, except for Marx line score which was different in PWs compared to those with longer experience of CL wear (p = 0.03) CONCLUSION: Alterations to MG morphology and function accompany contact lens wear. Although these changes onset during the first 2 years of wear, prolonged CL exposure beyond this point does not appear to be associated with further modification. Cessation of wear for at up to 6 months does not lead to resolution. © 2016 The Authors Ophthalmic & Physiological Optics © 2016 The College of Optometrists.

"Psychometric properties of the PTSD Checklist for Diagnostic and Statistical Manual of Mental Disorders-Fifth Edition (PCL-5) in veterans": Correction to Bovin et al. (2016).

PubMed

2017-06-01

Reports an error in "Psychometric properties of the PTSD Checklist for Diagnostic and Statistical Manual of Mental Disorders-Fifth Edition (PCL-5) in veterans" by Michelle J. Bovin, Brian P. Marx, Frank W. Weathers, Matthew W. Gallagher, Paola Rodriguez, Paula P. Schnurr and Terence M. Keane ( Psychological Assessment , 2016[Nov], Vol 28[11], 1379-1391). In the article, the departments and affiliations were incorrectly listed for authors Michelle J. Bovin, Brian P. Marx, Matthew W. Gallagher, Paola Rodriguez, Paula P. Schnurr, and Terence M. Keane. The first department and affiliation for authors Michelle J. Bovin, Brian P. Marx, Matthew W. Gallagher, Paola Rodriguez, and Terence M. Keane and should have read "National Center for PTSD at VA Boston Healthcare System, Boston, Massachusetts". The first department and affiliation for author Paula P. Schnurr should have read "National Center for PTSD, White River Junction, Vermont." The online version of this article has been corrected. (The following abstract of the original article appeared in record 2015-55809-001.) This study examined the psychometric properties of the posttraumatic stress disorder (PTSD) Checklist for Diagnostic and Statistical Manual of Mental Disorders-Fifth Edition (PCL-5; Weathers, Litz, et al., 2013b) in 2 independent samples of veterans receiving care at a Veterans Affairs Medical Center (N = 468). A subsample of these participants (n = 140) was used to define a valid diagnostic cutoff score for the instrument using the Clinician-Administered PTSD Scale for DSM-5 (CAPS-5; Weathers, Blake, et al., 2013) as the reference standard. The PCL-5 test scores demonstrated good internal consistency (α = .96), test-retest reliability (r = .84), and convergent and discriminant validity. Consistent with previous studies (Armour et al., 2015; Liu et al., 2014), confirmatory factor analysis revealed that the data were best explained by a 6-factor anhedonia model and a 7-factor hybrid model. Signal detection analyses using the CAPS-5 revealed that PCL-5 scores of 31 to 33 were optimally efficient for diagnosing PTSD (κ(.5) = .58). Overall, the findings suggest that the PCL-5 is a psychometrically sound instrument that can be used effectively with veterans. Further, by determining a valid cutoff score using the CAPS-5, the PCL-5 can now be used to identify veterans with probable PTSD. However, findings also suggest the need for research to evaluate cluster structure of DSM-5. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

[Processes of ventricles I-III. Review of the patient population of the Neurosurgery Clinic of the Karl Marx University 1953-1983].

PubMed

Niebeling, H G; Goldhahn, W E

1985-01-01

Within three decades 254 patients with processes of the brain ventricles I-III have been treated at the Leipzig Neurosurgical Clinic. The article subdivides the patients in general and according to the histology, localisation, lateral differences, dignity, operability as well as the postoperative lethality. The evaluation gives many clues with respect to the diagnostics and therapy of these ventricular processes. Today, the improvements obtained by computer tomography and by microsurgery are well the to fore.

Energy Storage Devices as Prime Power Supplies for Low Energy, High Voltage Marx Generators

DTIC Science & Technology

2017-10-30

8217 LANGDON.STEPH EN.L.1232187065 Digitally signed by LANGDON.STEPHEN.L.123218706 5 Date: 2018.03.15 14:37:06 -06󈧄’ i REPORT DOCUMENTATION PAGE Form Approved...NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 30-10-2017 2. REPORT TYPE Final Report 3. DATES COVERED (From - To) 03-08-2015...area code) Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. 239.18 ii This page intentionally left blank. iii Approved

Translations on Eastern Europe Political, Sociological, and Military Affairs, Number 1456.

DTIC Science & Technology

1977-10-06

first line of each item, or following the last line of a brief, indicate how the original information was processed. Where no processing indicator is...34’ t6ChniCal ^ and ^^ the ^ve^mSt or n i ai abil y and endurance among young people. Basic defense training is given to all boys and girls aged 16-18...real prerequi- sites for the transition to communism are being created in the true home- land of Marx and Engels. This is how the GDR appears today

ALS user meeting features 10th anniversary celebration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, Art

2003-12-05

The Advanced Light Source (ALS) saw first light on October 5, 1993, not quite to the day but close to 10 years before the 2003 ALS Users Association meeting, held October 6-8. Fittingly, the proceedings included retrospectives from two of the key players in the early history of the ALS, David Attwood and Jay Marx, and a display of photographs chronicling its construction and commissioning. Science highlights, highlights from young researchers, and posters constituted the meat of the program on Monday and Tuesday morning, while workshops took over Tuesday afternoon and all day Wednesday.

[Problems in the admission to in-hospital oral surgical care from the patient's viewpoint--results of patient interviews in the hospital for dental and maxillo-facial surgery of the Karl Marx University, Leipzig].

PubMed

Erpenbeck, F; Birnbaum, K; Langanke, B; Niemand, B; Thomzyk, I

1979-06-01

The author deals with the results from the interviewing of oral surgery patients on their problems concerning the sending and the admission to the hospital, with special attention to the problems of waiting for admission, the familiarization with the clinical environment and the improvement suggestions of the patients. The conclusions concern tasks arising from the medical and dental care for inpatients as well as for outpatients.

High-repetition-rate short-pulse gas discharge.

PubMed

Tulip, J; Seguin, H; Mace, P N

1979-09-01

A high-average-power short-pulse gas discharge is described. This consists of a volume-preionized transverse discharge of the type used in gas lasers driven by a Blumlein energy storage circuit. The Blumlein circuit is fabricated from coaxial cable, is pulse-charged from a high-repetition-rate Marx-bank generator, and is switched by a high-repetition-rate segmented rail gap. The operation of this discharge under conditions typical of rare-gas halide lasers is described. A maximum of 900 pps was obtained, giving a power flow into the discharge of 30 kW.

[The Marxist outlook on population].

PubMed

Qin, R

1984-09-29

Marxist population theory and world population are discussed. From his study of capitalist population theory Marx concluded, "In capitalist reproduction, poverty produces population," thus rejecting Malthusian population determinism theory and developing economic determinism. According to UN statistics, world population has stabilized since the middle of this century after having doubled every hundred years for the last 300; population in the developed countries showed a positive decrease and average net population growth of the developing countries also decreased. The premise of this paper is that population grows according to social economy development. During the last several hundred years, world wealth increased much faster than population; in the last 200 years alone, the population has increased fivefold, but wealth fortyfold. In addition, world population analysis reveals an inverse relationship between wealth and population in the developed and developing countries: the poorer the country, the greater the population. From this perspective, the study of population must begin with surplus labor. Accumulation of surplus production is the foundation of continuous social development and the basis for population growth. The major difference in methods between capitalist countries and China is that the capitalist-planned fertility affects the individual family while Chinese-planned fertility has the whole nation in mind. Human fertility is determined by the economic system. Private ownership determines the private nature of fertility and public ownership determines the public nature of fertility. Thus population development is determined by the accumulation of social wealth.

Microsecond Electron Beam Source with Electron Energy Up to 400 Kev and Plasma Anode

NASA Astrophysics Data System (ADS)

Abdullin, É. N.; Basov, G. F.; Shershnev, S.

2017-12-01

A new high-power source of electrons with plasma anode for producing high-current microsecond electron beams with electron energy up to 400 keV has been developed, manufactured, and put in operation. To increase the cross section and pulse current duration of the beam, a multipoint explosive emission cathode is used in the electron beam source, and the beam is formed in an applied external guiding magnetic field. The Marx generator with vacuum insulation is used as a high-voltage source. Electron beams with electron energy up to 300-400 keV, current of 5-15 kA, duration of 1.5-3 μs, energy up to 4 kJ, and cross section up to 150 cm2 have been produced. The operating modes of the electron beam source are realized in which the applied voltage is influenced weakly on the current. The possibility of source application for melting of metal surfaces is demonstrated.

Marx, Irigaray, and the politics of reproduction.

PubMed

Weinbaum, A E

1994-01-01

Both the concept and practice of reproduction have been newly configured, with reproductive labor assuming an abstract value as social labor and women around the globe work to produce baby commodities which enter the market along with other domestic and imported products. This situation dictates that surrogacy not be treated as an aberration. One must instead reconceptualize the maternal body as a reproductive resource and rethink the relationship between mother and fetus. This paper attempts to develop a materialist analysis of reproductive labor by offering a strategy for renarrativizing the mother. It briefly explains what feminists involved in the pro-abortion movement could gain by incorporating a Marxist understanding of reproductive labor as productive in the strictest sense, and then suggests, through an analysis of the work of Luce Irigaray, the simultaneous need for a self-reflexive renarrativization of the maternal body which may account for women's role as reproductive laborers. Sections are on reproduction, maternal as mimetic matrix, and reproductive ethics and sexual rights.

Effect of graft choice on the outcome of revision anterior cruciate ligament reconstruction in the Multicenter ACL Revision Study (MARS) Cohort

PubMed Central

Wright, Rick W.; Huston, Laura J.; Haas, Amanda K.; Spindler, Kurt P.; Nwosu, Sam K.; Allen, Christina R.; Anderson, Allen F.; Cooper, Daniel E.; DeBerardino, Thomas M.; Dunn, Warren R.; Lantz, Brett (Brick) A.; Stuart, Michael J.; Garofoli, Elizabeth A.; Albright, John P.; Amendola, Annunziato (Ned); Andrish, Jack T.; Annunziata, Christopher C.; Arciero, Robert A.; Bach, Bernard R.; Baker, Champ L.; Bartolozzi, Arthur R.; Baumgarten, Keith M.; Bechler, Jeffery R.; Berg, Jeffrey H.; Bernas, Geoffrey A.; Brockmeier, Stephen F.; Brophy, Robert H.; Bush-Joseph, Charles A.; Butler, J. Brad; Campbell, John D.; Carey, James L.; Carpenter, James E.; Cole, Brian J.; Cooper, Jonathan M.; Cox, Charles L.; Creighton, R. Alexander; Dahm, Diane L.; David, Tal S.; Flanigan, David C.; Frederick, Robert W.; Ganley, Theodore J.; Gatt, Charles J.; Gecha, Steven R.; Giffin, James Robert; Hame, Sharon L.; Hannafin, Jo A.; Harner, Christopher D.; Harris, Norman Lindsay; Hechtman, Keith S.; Hershman, Elliott B.; Hoellrich, Rudolf G.; Hosea, Timothy M.; Johnson, David C.; Johnson, Timothy S.; Jones, Morgan H.; Kaeding, Christopher C.; Kamath, Ganesh V.; Klootwyk, Thomas E.; Levy, Bruce A.; Ma, C. Benjamin; Maiers, G. Peter; Marx, Robert G.; Matava, Matthew J.; Mathien, Gregory M.; McAllister, David R.; McCarty, Eric C.; McCormack, Robert G.; Miller, Bruce S.; Nissen, Carl W.; O'Neill, Daniel F.; Owens, Brett D.; Parker, Richard D.; Purnell, Mark L.; Ramappa, Arun J.; Rauh, Michael A.; Rettig, Arthur C.; Sekiya, Jon K.; Shea, Kevin G.; Sherman, Orrin H.; Slauterbeck, James R.; Smith, Matthew V.; Spang, Jeffrey T.; Svoboda, Steven J.; Taft, Timothy N.; Tenuta, Joachim J.; Tingstad, Edwin M.; Vidal, Armando F.; Viskontas, Darius G.; White, Richard A.; Williams, James S.; Wolcott, Michelle L.; Wolf, Brian R.; York, James J.

2015-01-01

Background Most surgeons believe that graft choice for ACL reconstruction is an important factor related to outcome. Although graft choice may be limited in the revision setting based on previously used grafts, it is still felt to be important. Hypothesis The purpose of this study was to determine if revision ACL graft choice predicts outcomes related to sports function, activity level, OA symptoms, graft re-rupture, and reoperation at two years following revision reconstruction. We hypothesized that autograft use would result in increased sports function, increased activity level, and decreased OA symptoms (as measured by validated patient reported outcome instruments). Additionally, we hypothesized that autograft use would result in decreased graft failure and reoperation rate 2 years following revision ACL reconstruction. Study Design Prospective cohort study; Level of evidence, 2. Methods Revision ACL reconstruction patients were identified and prospectively enrolled by 83 surgeons over 52 sites. Data collected included baseline demographics, surgical technique and pathology, and a series of validated patient reported outcome instruments (IKDC, KOOS, WOMAC, and Marx activity rating score). Patients were followed up at 2 years, and asked to complete the identical set of outcome instruments. Incidence of additional surgery and reoperation due to graft failure were also recorded. Multivariate regression models were used to determine the predictors (risk factors) of IKDC, KOOS, WOMAC, Marx scores, graft re-rupture, and reoperation rate at 2 years following revision surgery. Results 1205 patients were successfully enrolled with 697 (58%) males. Median age was 26. In 88% this was their first revision. 341 (28%) were undergoing revision by the surgeon that had performed the previous reconstruction. 583 (48%) underwent revision reconstruction utilizing an autograft, 590 (49%) allograft, and 32 (3%) both autograft and allograft. Median time since their last ACL reconstruction was 3.4 years. Questionnaire follow-up was obtained on 989 subjects (82%), while phone follow-up was obtained on 1112 subjects (92%). The IKDC, KOOS, and WOMAC scores (with the exception of the WOMAC stiffness subscale) all significantly improved at the two year follow-up time point (p<0.001). In contrast, the two year MARX activity scale demonstrated a significant decrease from the initial score at enrollment (p<0.001). Graft choice proved to be a significant predictor of 2 year IKDC scores (p=0.017). Specifically, the use of an autograft for revision reconstruction predicted improved score on the IKDC [p=0.045; Odds Ratio (OR) = 1.31; 95% confidence intervals (CI) = 1.01, 1.70]. The use of an autograft predicted an improved on the KOOS subscale Sports and Recreation (p=0.037; OR=1.33; 95% CI=1.02, 1.73). Use of an autograft also predicted improved scores on the KOOS subscale Quality of Life (QOL) (p=0.031; OR=1.33; 95% CI=1.03, 1.73). For the KOOS Symptoms and ADL subscales, graft choice did not predict outcome score. Graft choice also proved to be a significant predictor of 2 year Marx activity level scores (p=0.012). Graft re-rupture was reported in 37/1112 (3.3%) of patients by their two year follow-up: 24 allografts, 12 autografts, and 1 allograft + autograft. Use of an autograft for revision resulted in patients 2.78 times less likely to sustain a subsequent graft rupture than if an allograft was utilized (p=0.047; 95% CI=1.01, 7.69). Conclusions Improved sports function and patient reported outcome measures are obtained when an autograft is utilized. Additionally, use of an autograft shows a decreased risk in graft re-rupture at two years follow-up. No differences were noted in rerupture or patient reported outcomes between soft tissue and bone-patellar tendon-bone grafts. Surgeon education regarding the findings in this study can result in potentially improved revision ACL reconstruction results for our patients. PMID:25274353

Effect of graft choice on the outcome of revision anterior cruciate ligament reconstruction in the Multicenter ACL Revision Study (MARS) Cohort.

PubMed

2014-10-01

Most surgeons believe that graft choice for anterior cruciate ligament (ACL) reconstruction is an important factor related to outcome; however, graft choice for revision may be limited due to previously used grafts. Autograft use would result in increased sports function, increased activity level, and decreased osteoarthritis symptoms (as measured by validated patient-reported outcome instruments). Autograft use would result in decreased graft failure and reoperation rate 2 years after revision ACL reconstruction. Cohort study; Level of evidence, 2. Patients undergoing revision ACL reconstruction were identified and prospectively enrolled by 83 surgeons at 52 sites. Data collected included baseline demographics, surgical technique, pathologic abnormalities, and the results of a series of validated, patient-reported outcome instruments (International Knee Documentation Committee [IKDC], Knee injury and Osteoarthritis Outcome Score [KOOS], Western Ontario and McMaster Universities Osteoarthritis Index [WOMAC], and Marx activity rating score). Patients were followed up at 2 years and asked to complete the identical set of outcome instruments. Incidences of additional surgery and reoperation due to graft failure were also recorded. Multivariate regression models were used to determine the predictors (risk factors) of IKDC, KOOS, WOMAC, Marx scores, graft rerupture, and reoperation rate at 2 years after revision surgery. A total of 1205 patients (697 [58%] males) were enrolled. The median age was 26 years. In 88% of patients, this was their first revision, and 341 patients (28%) were undergoing revision by the surgeon who had performed the previous reconstruction. The median time since last ACL reconstruction was 3.4 years. Revision using an autograft was performed in 583 patients (48%), allograft was used in 590 (49%), and both types were used in 32 (3%). Questionnaire follow-up was obtained for 989 subjects (82%), while telephone follow-up was obtained for 1112 (92%). The IKDC, KOOS, and WOMAC scores (with the exception of the WOMAC stiffness subscale) all significantly improved at 2-year follow-up (P < .001). In contrast, the 2-year Marx activity score demonstrated a significant decrease from the initial score at enrollment (P < .001). Graft choice proved to be a significant predictor of 2-year IKDC scores (P = .017). Specifically, the use of an autograft for revision reconstruction predicted improved score on the IKDC (P = .045; odds ratio [OR] = 1.31; 95% CI, 1.01-1.70). The use of an autograft predicted an improved score on the KOOS sports and recreation subscale (P = .037; OR = 1.33; 95% CI, 1.02-1.73). Use of an autograft also predicted improved scores on the KOOS quality of life subscale (P = .031; OR = 1.33; 95% CI, 1.03-1.73). For the KOOS symptoms and KOOS activities of daily living subscales, graft choice did not predict outcome score. Graft choice was a significant predictor of 2-year Marx activity level scores (P = .012). Graft rerupture was reported in 37 of 1112 patients (3.3%) by their 2-year follow-up: 24 allografts, 12 autografts, and 1 allograft and autograft. Use of an autograft for revision resulted in patients being 2.78 times less likely to sustain a subsequent graft rupture compared with allograft (P = .047; 95% CI, 1.01-7.69). Improved sports function and patient-reported outcome measures are obtained when an autograft is used. Additionally, use of an autograft shows a decreased risk in graft rerupture at 2-year follow-up. No differences were noted in rerupture or patient-reported outcomes between soft tissue and bone-patellar tendon-bone grafts. Surgeon education regarding the findings of this study has the potential to improve the results of revision ACL reconstruction. © 2014 The Author(s).

Plasma x-ray radiation source.

PubMed

Popkov, N F; Kargin, V I; Ryaslov, E A; Pikar', A S

1995-01-01

This paper gives the results of studies on a plasma x-ray source, which enables one to obtain a 2.5-krad radiation dose per pulse over an area of 100 cm2 in the quantum energy range from 20 to 500 keV. Pulse duration is 100 ns. Spectral radiation distributions from a diode under various operation conditions of a plasma are obtained. A Marx generator served as an initial energy source of 120 kJ with a discharge time of T/4 = 10-6 s. A short electromagnetic pulse (10-7 s) was shaped using plasma erosion opening switches.

Suppressing Thermal Energy Drift in the LLNL Flash X-Ray Accelerator Using Linear Disk Resistor Stacks

DTIC Science & Technology

2011-06-01

induction accelerator with a voltage output of 18MeV at a current of 3kA. The electron beam is focused onto a tantalum target to produce X-rays. The... capacitors in each bank, half of which are charged in parallel positively, and the other half are negatively charged in parallel. The charge voltage can...be varied from ±30kV to ±40kV. The Marx capacitors are fired in series into the Blumleins with up to 400kV 2µS output. Figure 1 FXR Pulsed Power

Changing ideas of global limits.

PubMed

Goddy, D

1984-03-02

In this discussion of changing ideas of global limits, attention is directed to world trade, moral restraint, and the "green revolution." A fresh look at the work of those who first considered population problems, e.gg., Malthur, can help make some sense of the population problems the world faces today. Malthus, writing in the late 1700s, concluded that population multiplies with each generation. He saw that food production was limited by the amount of available cropland and that the more people there are, the less food they will have to eat -- assuming that all available cropland is planted. This grim view of the future led Malthus to oppose government aid to the poor maintaining that such assistance would only encourage poor people to have large families. His solution was "moral restratin," seeing it as the duty of each individual to refrain from marriage until he was able to support his children. At the time this advice seemed cruel and Malthus was bitterly attacked by writers everywhere in Europe. Karl Marx and other ctitics of Malthus believed that poverty was caused by unjust governments and the selfishness of the rich. Marx clamied that the problem was too few jobs rather than too many people. The dire predictions of Malthus were soon forgotten as manufacturing industries began to transform the economies of Western Europe in the 1800s. Along with soaring economic growth came a host of developments that improved people's lives, e.g., better transportation, better sanitiation and nutrition, and better medicine. New inventions helped farmers fo produce more food. Next came the "demographic transition." Population grew quickly in Europe and North America as people became healthier and lived longer. Gradually, people in the industrial nations began deciding to have smaller families to enable them to afford an even higher living standard. By the late 1920s birthrates in Europe and the US had dropped so low that mention of the "population problem" usually referred to the threat of underpopulation. Following World War II, developing countries such as Mexico and India began to introduce modern medicine and sanitation, and death rates dropped and thepopulations of these countries mushroomed. Suddenly, world leaders were taking Malthus' warning seriously. In the 1970s scientists began to worry that people were using up the earth's resources and polluting the environment. 150 years after the death of Malthus there is little to make Malthus change his theory. 1 difference is that for the 1st time in history governments are working to control population growth.

Cosmopolitan sociology and the classical canon: Ferdinand Tönnies and the emergence of global Gesellschaft.

PubMed

Inglis, David

2009-12-01

How relevant are figures from the classical sociological canon for present day efforts to found cosmopolitan forms of sociological thought? According to the critique of Ulrich Beck, the classical sociologists remain far too wedded to nation-state-centred ways of thinking to play an important role in the development of cosmopolitan sociology. This paper argues that such a critique fails to account for the ways in which certain classical sociologists were attuned to the emerging cosmopolitical conditions of their own time, were not wholly wedded to nation-state-based conceptualizations, and thus can function as both groundings of, and inspirations for, cosmopolitan sociological endeavours. The apparently unpromising case of Tönnies is focused on, the paper showing how he outlined an account of how and why a planet-spanning condition of Gesellschaft developed a position which diverges from and counterpoints Marx's analysis of similar phenomena in important ways. The stereotype of Tönnies as an arch-conservative is also dissolved, allowing him to be considered as one of the most important antecedents of contemporary cosmopolitan sociological practice and a canonical figure still relevant for present-day purposes.

A Bayesian estimation of a stochastic predator-prey model of economic fluctuations

NASA Astrophysics Data System (ADS)

Dibeh, Ghassan; Luchinsky, Dmitry G.; Luchinskaya, Daria D.; Smelyanskiy, Vadim N.

2007-06-01

In this paper, we develop a Bayesian framework for the empirical estimation of the parameters of one of the best known nonlinear models of the business cycle: The Marx-inspired model of a growth cycle introduced by R. M. Goodwin. The model predicts a series of closed cycles representing the dynamics of labor's share and the employment rate in the capitalist economy. The Bayesian framework is used to empirically estimate a modified Goodwin model. The original model is extended in two ways. First, we allow for exogenous periodic variations of the otherwise steady growth rates of the labor force and productivity per worker. Second, we allow for stochastic variations of those parameters. The resultant modified Goodwin model is a stochastic predator-prey model with periodic forcing. The model is then estimated using a newly developed Bayesian estimation method on data sets representing growth cycles in France and Italy during the years 1960-2005. Results show that inference of the parameters of the stochastic Goodwin model can be achieved. The comparison of the dynamics of the Goodwin model with the inferred values of parameters demonstrates quantitative agreement with the growth cycle empirical data.

The M-C-M' cycle and social capital.

PubMed

Hean, Sarah; Cowley, Sarah; Forbes, Angus; Griffiths, Peter; Maben, Jill

2003-03-01

Social capital has become a popular term over the past two decades amongst researchers, policy makers and practitioners from varied disciplines. This popularity, however, has resulted in a great deal of confusion over the nature and application of social capital in different contexts. This confusion has made it difficult to identify and measure social capital within the evaluation of specific social and health programmes, one of the aims of which may be to stimulate social capital. This paper identifies a theoretical model that seeks to capture the dynamic nature of social capital to assist in the development of research methods that will facilitate its measurement and exploration within such programmes. The model reported in the paper identifies the key components of social capital and expresses the relationship between those components in a dynamic system based on Marx's description of the process of capital (economic) exchanges expressed in the M-C-M' cycle. The M-C-M' cycle is the transformation of money (M) into commodities (C), and the change of commodities back again into money (M') of altered value. The emphasis within the paper is on the capital element of the concept and its transactional nature with the aim of avoiding the pitfall of attributing social capital in relation to social behaviours in isolation of context and interaction. Importantly, the paper seeks to distinguish the central elements of social capital from some of the antecedent factors and outcomes often attributed to and confused with social capital adding to the problem of providing valid measurement. The model is presented as the basis for the measurement of social capital within a transactional process involving the investment of social resources in a cyclical process, which may result in net gains or losses. This process is described as the R-C-R' cycle following Marx's model of economic capital, with the focus being on the transfer of social resources (R) rather than money (M). R represents an internal resource held by individuals, C the external resource or commodity they obtain from the network and the R' the internal resource of altered value. The possibilities of the model in assisting in the measurement of social capital specifically in assessing formal networks are explored.

F-5F Shark Nose radome lightning test

NASA Technical Reports Server (NTRS)

Scott, G. W.

1980-01-01

A unique F-5F radome wtih a geometry similar to a Shark Nose profile was tested with a high voltage Marx generator, 1,200,000 volts in order to demonstrate the effectiveness of the lightning protection system with currents from 5,000 amperes or greater. An edge discontinuity configuration is a characteristic feature in the forward region of the radome and occasionally serves as an attachment point. The results of nineteen attachment tests at various aspect angles with an air gap of one meter indicated that no damage occurred to the dielectric material of the radom. The test proved the effectiveness of the lightning protection system.

Market returns? Gender and theories of change in employment relations.

PubMed

Irwin, S; Bottero, W

2000-06-01

This paper explores recent arguments about the marketization of female labour, in the context of a wider analysis of the role of concepts like 'the market' and 'individualization' in sociological accounts of change in employment relations. It will be argued that within sociology there has been a tendency for rapid, large-scale changes in employment relations to be characterized as the breakdown of social influences or structures and as the emergence of atomized, individuated market forces. In the most recent models, change in the nature of gendered positions within employment are presented in terms of a decline of social structuring and social constraint. These emergent accounts hold similarities to classical economics, and to Marx's and Weber's accounts of employment, which also characterized new forms of employment relations in terms of the emptying of their social content and their replacement by market forms. We offer an alternative, moral economy, perspective which foregrounds the continued significance of social relations in the structuring of employment and employment change. We develop the argument through an analysis of gendered patterns of employment and change in family form.

[A political matter: science and ideology in the 21st century].

PubMed

Wahrig, Bettina

2010-06-01

In the last two decades, history of science and science studies have been quite reluctant to adopt the notion of ideology when analyzing the dynamics of science. This may be an effect of the decreasing popularity of neo-marxist approaches within this disciplinary field; but it is also due to the fact that alternative approaches have been developed, for example Michel Foucault's notion of problematization, Roland Barthes' semiotic mythology, Bruno Latour's re-interpretation of the ontological difference between fact and fetish in science, or Donna Haraway's semi-fictional re-narrations of the techno-scientific world. This contribution undertakes to sketch the impact of two strands of 19th century immanentism on the authors named above, and on their use of concepts related to the notion of ideology, namely fetish, fetishism, myth and mythology respectively. It is argued that in some respect, Marx' concept of commodity fetishism is worth being re-examined, since it articulates a dialectical relation of 'reality' and 'seeming', and its impact on Barthes' mythology is deeper than it might appear at first glance.

Bidirectional reaction steps in metabolic networks: I. Modeling and simulation of carbon isotope labeling experiments.

PubMed

Wiechert, W; de Graaf, A A

1997-07-05

The extension of metabolite balancing with carbon labeling experiments, as described by Marx et al. (Biotechnol. Bioeng. 49: 11-29), results in a much more detailed stationary metabolic flux analysis. As opposed to basic metabolite flux balancing alone, this method enables both flux directions of bidirectional reaction steps to be quantitated. However, the mathematical treatment of carbon labeling systems is much more complicated, because it requires the solution of numerous balance equations that are bilinear with respect to fluxes and fractional labeling. In this study, a universal modeling framework is presented for describing the metabolite and carbon atom flux in a metabolic network. Bidirectional reaction steps are extensively treated and their impact on the system's labeling state is investigated. Various kinds of modeling assumptions, as usually made for metabolic fluxes, are expressed by linear constraint equations. A numerical algorithm for the solution of the resulting linear constrained set of nonlinear equations is developed. The numerical stability problems caused by large bidirectional fluxes are solved by a specially developed transformation method. Finally, the simulation of carbon labeling experiments is facilitated by a flexible software tool for network synthesis. An illustrative simulation study on flux identifiability from available flux and labeling measurements in the cyclic pentose phosphate pathway of a recombinant strain of Zymomonas mobilis concludes this contribution.

Recycled Coarse Aggregate Produced by Pulsed Discharge in Water

NASA Astrophysics Data System (ADS)

Namihira, Takao; Shigeishi, Mitsuhiro; Nakashima, Kazuyuki; Murakami, Akira; Kuroki, Kaori; Kiyan, Tsuyoshi; Tomoda, Yuichi; Sakugawa, Takashi; Katsuki, Sunao; Akiyama, Hidenori; Ohtsu, Masayasu

In Japan, the recycling ratio of concrete scraps has been kept over 98 % after the Law for the Recycling of Construction Materials was enforced in 2000. In the present, most of concrete scraps were recycled as the Lower Subbase Course Material. On the other hand, it is predicted to be difficult to keep this higher recycling ratio in the near future because concrete scraps increase rapidly and would reach to over 3 times of present situation in 2010. In addition, the demand of concrete scraps as the Lower Subbase Course Material has been decreased. Therefore, new way to reuse concrete scraps must be developed. Concrete scraps normally consist of 70 % of coarse aggregate, 19 % of water and 11 % of cement. To obtain the higher recycling ratio, the higher recycling ratio of coarse aggregate is desired. In this paper, a new method for recycling coarse aggregate from concrete scraps has been developed and demonstrated. The system includes a Marx generator and a point to hemisphere mesh electrode immersed in water. In the demonstration, the test piece of concrete scrap was located between the electrodes and was treated by the pulsed discharge. After discharge treatment of test piece, the recycling coarse aggregates were evaluated under JIS and TS and had enough quality for utilization as the coarse aggregate.

[The effect of daily controlled oral hygiene on the oral health of children in a town with drinking water fluoridation (Karl Marx Stadt)].

PubMed

Georgi, J; Künzel, W

1976-03-01

Under the conditions of an optimized (with regard to caries prevention) fluoride content of the drinking uater, the authors studied (in the framework of an oral hygiene measure covering 32 months) in 149 children 6.5-8 years of age the effects of supervised daily dental and oral care on dental health. The improvement in oral hygiene (OHI) by 33% is in harmony with an additional caries reduction by 33.3% (DMF/S index) and a decrease of the PM index by 47%. A wider use of oral hygiene actions as secondary preventive measures is, therefore, recommended also for towns with fluoridated drinking water.

CCD Photometry of Six Asteroids from the Universidad de Monterry Observatory

NASA Astrophysics Data System (ADS)

Sada, Pedro V.

2008-09-01

CCD photometry of six asteroids was obtained at the Universidad de Monterrey Observatory during January and February 2008. The resulting synodic rotation periods and amplitudes are as follows: 1292 Luce, 6.9541 ± 0.0002 h, 0.20 ± 0.01 mag; 1303 Luthera, 5.878 ± 0.003 h, 0.08 ± 0.01 mag; 1900 Katyusha, 9.4999 ± 0.0001 h, 0.72 ± 0.02 mag, 2807 Karl Marx, 8.842 ± 0.001 h, 0.40 ± 0.05 mag; 3409 Abramov, 7.791 ± 0.002 h, 0.55 ± 0.02 mag; and 9117 Aude, 2.8156 ± 0.0001 h, 0.20 ± 0.01 mag.

Darnton’s Cats, Bacon’s Rifle, and History of Science 101.

PubMed

Küçük, Harun

2016-12-01

Many of us who teach History of Science 101 courses face a situation where we must tell our story without relying on students’ prior knowledge of, say, the significance of ancient Greece and China, premodern and modern colonialism, or Marx. This leaves us needing a clear and punchy basic message, supported by a solid, well-structured, and inclusive story line that also doubles as world history. This response takes a look at the prospects and problems of longue durée histories of science from the perspective of cultural history. It voices sympathy toward Frans van Lunteren’s project and presents a small sample of potential difficulties involved in matching machines with historical periods.

Reference Values for the Marx Activity Rating Scale in a Young Athletic Population: History of Knee Ligament Injury Is Associated With Higher Scores.

PubMed

Cameron, Kenneth L; Peck, Karen Y; Thompson, Brandon S; Svoboda, Steven J; Owens, Brett D; Marshall, Stephen W

2015-01-01

Activity-related patient-reported outcome measures are an important component of assessment after knee ligament injury in young and physically active patients; however, normative data for most activity scales are limited. To present reference values by sex for the Marx Activity Rating Scale (MARS) within a young and physically active population while accounting for knee ligament injury history and sex. Cross-sectional study. Level 2. All incoming freshman entering a US Service Academy in June of 2011 were recruited to participate in this study. MARS was administered to 1169 incoming freshmen (203 women) who consented to participate within the first week of matriculation. All subjects were deemed healthy and medically fit for military service on admission. Subjects also completed a baseline questionnaire that asked for basic demographic information and injury history. We calculated means with standard deviations, medians with interquartile ranges, and percentiles for ordinal and continuous variables, and frequencies and proportions for dichotomous variables. We also compared median scores by sex and history of knee ligament injury using the Kruskal-Wallis test. MARS was the primary outcome of interest. The median MARS score was significantly higher for men when compared with women (χ(2) = 13.22, df = 1, P < 0.001) with no prior history of knee ligament injury. In contrast, there was no significant difference in median MARS scores between men and women (χ(2) = 0.47, df = 1, P = 0.493) who reported a history of injury. Overall, median MARS scores were significantly higher among those who reported a history of knee ligament injury when compared with those who did not (χ(2) = 9.06, df = 1, P = 0.003). Assessing activity as a patient-reported outcome after knee ligament injury is important, and reference values for these instruments need to account for the influence of prior injury and sex. © 2015 The Author(s).

Surgical Management of Rectus Femoris Avulsion Among Professional Soccer Players

PubMed Central

Sonnery-Cottet, Bertrand; Barbosa, Nuno Camelo; Tuteja, Sanesh; Gardon, Roland; Daggett, Matt; Monnot, Damien; Kajetanek, Charles; Thaunat, Mathieu

2017-01-01

Background: Rectus femoris injuries are common among athletes, especially in kicking sports such as soccer; however, proximal rectus femoris avulsions in athletes are a relatively rare entity. Purpose/Hypothesis: The purpose of this study was to describe and report the results of an original technique of surgical excision of the proximal tendon remnant followed by a muscular suture repair. Our hypothesis was that this technique limits the risk of recurrence in high-level athletes and allows for rapid recovery without loss of quadriceps strength. Study Design: Case series; Level of evidence, 4. Methods: Our retrospective series included 5 players aged 31.8 ± 3.9 years with acute proximal rectus femoris avulsion injuries who underwent a surgical resection of the proximal tendon between March 2012 and June 2014. Four of these players had recurrent rectus femoris injuries in the 9 months before surgery, while 1 player had surgery after a first injury. Mean follow-up was 18.2 ± 12.6 months, and minimum follow-up was 9 months. We analyzed the age, sex distribution, physical examination outcomes, type and mechanism of injury, diagnosis, treatment and complications during surgery, postoperative follow-up, and time to return to play. The Lower Extremity Functional Scale (LEFS) and Marx scores were obtained at 3-month follow-up, and isokinetic tests were performed before return to sports. A telephone interview was completed to determine the presence of recurrence at an average follow-up of 18.2 months. Results: At 3-month follow-up, all patients had Marx activity scores of 16 and LEFS scores of 80. Return to the previous level of play occurred at a mean of 15.8 ± 2.6 weeks after surgery, and none of the athletes suffered a recurrence. Isokinetic test results were comparable between both sides. Conclusion: The surgical treatment of proximal rectus femoris avulsions, consisting of resection of the tendinous part of the muscle, is a reliable and safe technique allowing a fast recovery in professional athletes. PMID:28203599

Results of revision anterior shoulder stabilization surgery in adolescent athletes.

PubMed

Blackman, Andrew J; Krych, Aaron J; Kuzma, Scott A; Chow, Roxanne M; Camp, Christopher; Dahm, Diane L

2014-11-01

The purpose of this study was to determine failure rates, functional outcomes, and risk factors for failure after revision anterior shoulder stabilization surgery in high-risk adolescent athletes. Adolescent athletes who underwent primary anterior shoulder stabilization were reviewed. Patients undergoing subsequent revision stabilization surgery were identified and analyzed. Failure rates after revision surgery were assessed by Kaplan-Meier analysis. Failure was defined as recurrent instability requiring reoperation. Functional outcomes included the Marx activity score; American Shoulder and Elbow Surgeons score; and University of California, Los Angeles score. The characteristics of patients who required reoperation for recurrent instability after revision surgery were compared with those of patients who required only a single revision to identify potential risk factors for failure. Of 90 patients who underwent primary anterior stabilization surgery, 15 (17%) had failure and underwent revision surgery (mean age, 16.6 years; age range, 14 to 18 years). The mean follow-up period was 5.5 years (range, 2 to 12 years). Of the 15 revision patients, 5 (33%) had recurrent dislocations and required repeat revision stabilization surgery at a mean of 50 months (range, 22 to 102 months) after initial revision. No risk factors for failure were identified. The Kaplan-Meier reoperation-free estimates were 86% (95% confidence interval, 67% to 100%) at 24 months and 78% (95% confidence interval, 56% to 100%) at 48 months after revision surgery. The mean final Marx activity score was 14.8 (range, 5 to 20); American Shoulder and Elbow Surgeons score, 82.1 (range, 33 to 100); and University of California, Los Angeles score, 30.8 (range, 16 to 35). At 5.5 years' follow-up, adolescent athletes had a high failure rate of revision stabilization surgery and modest functional outcomes. We were unable to convincingly identify specific risk factors for failure of revision surgery. Level IV, retrospective therapeutic case series. Copyright © 2014 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

A reliable, compact, and repetitive-rate high power microwave generation system.

PubMed

Li, Wei; Li, Zhi-qiang; Sun, Xiao-liang; Zhang, Jun

2015-11-01

A compact high power microwave (HPM) generation system is described in this paper. The main parts of the HPM system are a Marx generator with a pulse forming line and a magnetron with diffraction output. The total weight and length of the system are 250 kg and 120 cm, respectively. The output microwave power of the HPM system at 550 kV of applied voltage and 0.33 T of magnetic field reaches 1 GW at 2.32 GHz of central frequency with 38 ns of pulse duration, 23% of power conversion efficiency, and Gaussian radiation pattern. In the bursts operation, both time and amplitude jitters are less than 4 ns and lower than 1.5 dB, respectively.

A few laced genes: women's standpoint in the feminist ancestry of Dorothy E. Smith.

PubMed

Smythe, Deirdre

2009-04-01

This article looks at the feminist activism of particular women in the ancestry of the eminent Canadian sociologist, Dorothy E. Smith, and at the archival data that confirm the traces of their influence found in her theory-building. Using the method of interpretative historical sociology and a conceptual framework drawn from Marx called the "productive forces," the article examines the feminist theology of her Quaker ancestor, Margaret Fell, and the militant suffrage activism of her mother and her grandmother, Dorothy Foster Place and Lucy Ellison Abraham, respectively. The article argues that the household labour of the remarkable women in her family line became a "productive force" that facilitated her imagining of the feminist theory, "the standpoint of women".

East German medical aid to Nicaragua: the politics of solidarity between biomedicine and primary health care.

PubMed

Borowy, Iris

2017-01-01

Between 1979 and 1989 the government of the German Democratic Republic provided health assistance to Sandinista Nicaragua. After initial relief aid, the Sandinista embrace of a primary health care-based health system made East German health support difficult. The non-convertible currency, the repressive quality of the East German leadership, and the lack of experience with primary health care processes all limited its potential to provide support. After 1985, when implementation of this system stalled, East German health assistance was revitalized with the donation of the Hospital Carlos Marx. Providing medical services to three hundred thousand people, it combined elements of a strictly East German institution, using German personnel and equipment, with some integration into local systems.

A reliable, compact, and repetitive-rate high power microwave generation system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Wei; Li, Zhi-qiang; Sun, Xiao-liang

2015-11-15

A compact high power microwave (HPM) generation system is described in this paper. The main parts of the HPM system are a Marx generator with a pulse forming line and a magnetron with diffraction output. The total weight and length of the system are 250 kg and 120 cm, respectively. The output microwave power of the HPM system at 550 kV of applied voltage and 0.33 T of magnetic field reaches 1 GW at 2.32 GHz of central frequency with 38 ns of pulse duration, 23% of power conversion efficiency, and Gaussian radiation pattern. In the bursts operation, both timemore » and amplitude jitters are less than 4 ns and lower than 1.5 dB, respectively.« less

A New Labor Theory of Value for Rational Planning Through Use of the Bourgeois Profit Rate

PubMed Central

Weizsäcker, C. C. Von; Samuelson, Paul A.

1971-01-01

To maximaze steady-state per capita consumptions, goods should be valued at their “synchronized labor requirement costs”, which are shown to deviate from Marx's schemata of “values” but to coincide with bourgeois prices calculated at dated labor requirements, marked-up by compound interest, at a profit or interest rate equal to the system's rate of exponential growth. With capitalists saving all their incomes for future profits, workers get all there is to get. Departures from such an exogenous, or endogenous, golden-rule state are the rule in history rather than the exception. In the case of exponential labor-augmenting change, it is shown that competitive prices will equal historically embodied labor content. PMID:16591926

[Research on population theory must be integrated with China's reality].

PubMed

Qian, X

1983-05-29

This article is based upon a speech delivered by the author to a conference on population theory in memory of the centennial celebration of the death of Karl Marx. The conference was organized by the Institute of Population Theory of the Chinese People's University. According to the author, the only correct way to study population theory is to use the Marxist population theory as a guiding principle and integrate it with China's reality, and the format of dogmatism should not be adopted. The work on population theory studies should be established on a political and scientific foundation. The Chinese people should have a clear understanding of the goal of limiting China's population figure to under 1.2 billion at the end of this century. To reach this goal, the general public must be educated and understand to close relationship between family planning and the economic and social development of all of China. Family planning is a absolute necessity for the fundamental interests of China as a nation and as a people. Technical personnel and scientific theorists should be trained and organized in order that their work may satisfy the needs of China's reality. Family planning work should also be handled according to China's current situation.

Conceptual design of a pulsed-power accelerator optimized for megajoule-class 1-TPa dynamic-material-physics experiments

DOE PAGES

Stygar, William A.; Reisman, David B.; Stoltzfus, Brian S.; ...

2016-07-07

In this study, we have developed a conceptual design of a next-generation pulsed-power accelerator that is optmized for driving megajoule-class dynamic-material-physics experiments at pressures as high as 1 TPa. The design is based on an accelerator architecture that is founded on three concepts: single-stage electrical-pulse compression, impedance matching, and transit-time-isolated drive circuits. Since much of the accelerator is water insulated, we refer to this machine as Neptune. The prime power source of Neptune consists of 600 independent impedance-matched Marx generators. As much as 0.8 MJ and 20 MA can be delivered in a 300-ns pulse to a 16-mΩ physics load;more » hence Neptune is a megajoule-class 20-MA arbitrary waveform generator. Neptune will allow the international scientific community to conduct dynamic equation-of-state, phase-transition, mechanical-property, and other material-physics experiments with a wide variety of well-defined drive-pressure time histories. Because Neptune can deliver on the order of a megajoule to a load, such experiments can be conducted on centimeter-scale samples at terapascal pressures with time histories as long as 1 μs.« less

pyam: Python Implementation of YaM

NASA Technical Reports Server (NTRS)

Myint, Steven; Jain, Abhinandan

2012-01-01

pyam is a software development framework with tools for facilitating the rapid development of software in a concurrent software development environment. pyam provides solutions for development challenges associated with software reuse, managing multiple software configurations, developing software product lines, and multiple platform development and build management. pyam uses release-early, release-often development cycles to allow developers to integrate their changes incrementally into the system on a continual basis. It facilitates the creation and merging of branches to support the isolated development of immature software to avoid impacting the stability of the development effort. It uses modules and packages to organize and share software across multiple software products, and uses the concepts of link and work modules to reduce sandbox setup times even when the code-base is large. One sidebenefit is the enforcement of a strong module-level encapsulation of a module s functionality and interface. This increases design transparency, system stability, and software reuse. pyam is written in Python and is organized as a set of utilities on top of the open source SVN software version control package. All development software is organized into a collection of modules. pyam packages are defined as sub-collections of the available modules. Developers can set up private sandboxes for module/package development. All module/package development takes place on private SVN branches. High-level pyam commands support the setup, update, and release of modules and packages. Released and pre-built versions of modules are available to developers. Developers can tailor the source/link module mix for their sandboxes so that new sandboxes (even large ones) can be built up easily and quickly by pointing to pre-existing module releases. All inter-module interfaces are publicly exported via links. A minimal, but uniform, convention is used for building modules.

[Fluoridation at Karl Marx Stadt. XIII. Caries reduction and oral rehabilitation].

PubMed

Künzel, W

1976-07-01

12 years after water fluoridation (1971), the repercussions of the quantitative and qualitative changes in caries prevalence on the paedodontic care were studied on the basis of statistical findings from more than 36 000 subjects aged from 6 to 18 years. It was shown that the result of oral rehabilitation is substantially influenced by the increase in the number of subjects with primarily healthy dentitions and by the reduction in the number of carious teeth. Furthermore, the reduced number of cavities and fillings involving two or more surfaces and the less frequent occurrence of secondary caries have repercussion on the time spent by the paedodontist. Not least the caries reduction also influences the paedodontist/children ratio which has changed from 1:1659 in 1959 to 1:3208 in 1971.

Focused shock spark discharge drill using multiple electrodes

DOEpatents

Moeny, William M.; Small, James G.

1988-01-01

A spark discharge focused drill provided with one pulse forming line or a number of pulse forming lines. The pulse forming line is connected to an array of electrodes which would form a spark array. One of the electrodes of each of the array is connected to the high voltage side of the pulse forming line and the other electrodes are at ground potential. When discharged in a liquid, these electrodes produce intense focused shock waves that can pulverize or fracture rock. By delaying the firing of each group of electrodes, the drill can be steered within the earth. Power can be fed to the pulse forming line either downhole or from the surface area. A high voltage source, such as a Marx generator, is suitable for pulse charging the lines.

Optically isolated, 2 kHz repetition rate, 4 kV solid-state pulse trigger generator.

PubMed

Barnett, D H; Parson, J M; Lynn, C F; Kelly, P M; Taylor, M; Calico, S; Scott, M C; Dickens, J C; Neuber, A A; Mankowski, J J

2015-03-01

This paper presents the design and operation characteristics of a solid-state high voltage pulse generator. Its primary utilization is aimed at triggering a gaseous spark gap with high repeatability. Specifically, the trigger generator is designed to achieve a risetime on the order of 0.1 kV/ns to trigger the first stage, trigatron spark gap of a 10-stage, 500 kV Marx generator. The major design components are comprised of a 60 W constant current DC-DC converter for high voltage charging, a single 4 kV thyristor, a step-up pulse transformer, and magnetic switch for pulse steepening. A risetime of <30 ns and pulse magnitude of 4 kV is achieved matching the simulated performance of the design.

Nanosecond pulsed power generator for a voltage amplitude up to 300 kV and a repetition rate up to 16 Hz for fine disintegration of quartz

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krastelev, E. G., E-mail: ekrastelev@yandex.ru; Sedin, A. A.; Tugushev, V. I.

2015-12-15

A generator of high-power high-voltage nanosecond pulses is intended for electrical discharge disintegration of mineral quartz and other nonconducting minerals. It includes a 320 kV Marx pulsed voltage generator, a high-voltage glycerin-insulated coaxial peaking capacitor, and an output gas spark switch followed by a load, an electric discharge disintegration chamber. The main parameters of the generator are as follows: a voltage pulse amplitude of up to 300 kV, an output impedance of ≈10 Ω, a discharge current amplitude of up to 25 kA for a half-period of 80–90 ns, and a pulse repetition rate of up to 16 Hz.

Theories about sex and sexuality in utopian socialism.

PubMed

Poldervaart, S

1995-01-01

It was the utopian socialists of the period 1800-50 (Fourier, Saint-Simon, and the Saint-Simonians in France, as well as the Owenites in Great Britain) who not only challenged the imperialism of reason but sought to rehabilitate the flesh by valuing its pleasure and incentives. Sex and sexuality were central issues for the first socialists, who were scorned as "utopian" by Marx and Engels for seeking to improve the status of all members of society through peaceful means. Because Marxism has played a greater role in the history of socialism, the utopian socialist discussions have been largely disregarded. This essay analyzes the works of the utopian socialists Fourier, Saint-Simon, and the Saint-Simonians, arguing that resurgences of the utopian socialist tradition can be discerned around 1900 and again circa 1970.

Motivational beliefs, values, and goals.

PubMed

Eccles, Jacquelynne S; Wigfield, Allan

2002-01-01

This chapter reviews the recent research on motivation, beliefs, values, and goals, focusing on developmental and educational psychology. The authors divide the chapter into four major sections: theories focused on expectancies for success (self-efficacy theory and control theory), theories focused on task value (theories focused on intrinsic motivation, self-determination, flow, interest, and goals), theories that integrate expectancies and values (attribution theory, the expectancy-value models of Eccles et al., Feather, and Heckhausen, and self-worth theory), and theories integrating motivation and cognition (social cognitive theories of self-regulation and motivation, the work by Winne & Marx, Borkowski et al., Pintrich et al., and theories of motivation and volition). The authors end the chapter with a discussion of how to integrate theories of self-regulation and expectancy-value models of motivation and suggest new directions for future research.

Surgical Management of Recurrent Musculotendinous Hamstring Injury in Professional Athletes

PubMed Central

Sonnery-Cottet, Bertrand; Daggett, Matt; Gardon, Roland; Pupim, Barbara; Clechet, Julien; Thaunat, Mathieu

2015-01-01

Background: Hamstring injury is the most common muscular lesion in athletes. The conservative treatment is well described, and surgical management is often indicated for proximal tendinous avulsions. To our knowledge, no surgical treatment has been proposed for failure of conservative treatment in musculotendinous hamstring lesions. Purpose: To describe the surgical management of proximal and distal hamstring musculotendinous junction lesions in professional athletes after failure of conservative treatment. Study Design: Case series; Level of evidence, 4. Methods: A consecutive series of 10 professional athletes, including 4 soccer players, 4 rugby players, and 2 handball players, underwent surgical intervention between October 2010 and June 2014 for the treatment of recurrent musculotendinous hamstring injuries. All athletes had failed at least 3 months of conservative treatment for a recurrent musculotendinous hamstring injury. Surgical resection of the musculotendinous scar tissue was performed using a longitudinal muscular suture. Lower Extremity Functional Scale (LEFS) and Marx scores were obtained at the 3-month follow-up, and a final phone interview was completed to determine recurrence of hamstring injury and return to previous level of play. Results: The mean age at surgery was 25.2 years (range, 19-35 years). The musculotendinous hamstring lesions involved 8 semitendinosus and 2 biceps femoris, with 6 injuries located proximally and 4 distally. Conservative treatment lasted a mean 5.1 months (range, 3-9 months) after last recurrence, and the patients had an average of 2.7 (range, 2-5) separate incidents of injury recurrence before surgical intervention was decided upon. At the 3-month follow-up, all patients had Marx activity scores of 16 and LEFS scores of 80. All 10 patients returned to the same level of play at a mean 3.4 months (range, 2-5 months). At a mean follow-up of 28.7 months, none of the athletes had suffered a recurrence. No surgical complication was encountered. Conclusion: In cases of failed conservative treatment of musculotendinous hamstring lesions, surgical intervention may be a viable treatment option in professional athletes and allows the patient to return to the same level of play. PMID:26535376

SUSTAINED ISOMETRIC SHOULDER CONTRACTION ON MUSCULAR STRENGTH AND ENDURANCE: A RANDOMIZED CLINICAL TRIAL.

PubMed

Myers, Natalie L; Toonstra, Jenny L; Smith, Jacob S; Padgett, Cooper A; Uhl, Tim L

2015-12-01

The Advanced Throwers Ten Exercise Program incorporates sustained isometric contractions in conjunction with dynamic shoulder movements. It has been suggested that incorporating isometric holds may facilitate greater increases in muscular strength and endurance. However, no objective evidence currently exists to support this claim. The purpose of this research was to compare the effects of a sustained muscle contraction resistive training program (Advanced Throwers Ten Program) to a more traditional exercise training protocol to determine if increases in shoulder muscular strength and endurance occur in an otherwise healthy population. It was hypothesized that utilizing a sustained isometric hold during a shoulder scaption exercise from the Advanced Throwers Ten would produce greater increases in shoulder strength and endurance as compared to a traditional training program incorporating a isotonic scapular plane abduction (scaption) exercise. Randomized Clinical Trial. Fifty healthy participants were enrolled in this study, of which 25 were randomized into the traditional training group (age: 26 ± 8, height:172 ± 10 cm, weight: 73 ± 13 kg, Marx Activity Scale: 11 ± 4) and 25 were randomized to the Advanced Throwers Ten group (age: 28 ± 9, height: 169 ± 23 cm, weight: 74 ± 16 kg, Marx Activity Scale: 11 ± 5). No pre-intervention differences existed between the groups (P>0.05). Arm endurance and strength data were collected pre and post intervention using a portable load cell (BTE Evaluator, Hanover, MD). Both within and between group analyses were done in order to investigate average torque (strength) and angular impulse (endurance) changes. The traditional and Advanced Throwers Ten groups both significantly improved torque and angular impulse on both the dominant and non-dominant arms by 10-14%. There were no differences in strength or endurance following the interventions between the two training groups (p>0.75). Both training approaches increased strength and endurance as the muscle loads were consistent between protocols indicating that either approach will have positive effects. Level 2.

Return to Sport after ACL Surgery: A Comparison between Two Different Reconstructive Techniques.

PubMed

Baldassarri, Matteo; Perazzo, Luca; Ghinelli, Diego; Ricciarelli, Marco; Pilla, Federico; Buda, Roberto

2018-05-23

The anterior cruciate ligament reconstruction (ACLR) has become a very common surgical procedure. One of the main success indicators of the surgical procedure is the return to preinjury sporting level. In recent years, reconstructive techniques have been geared toward less morbidity and optimized ligaments process to speed up the recovery of sports activity. This study compares clinical and imaging data, to evaluate the timing of return to sport, of two populations undergoing ACLR using two different techniques: ACLR with hamstring maintaining tibial insertion (MHG) and an all-inside technique with complete hamstring detachment (DHG). Patients were clinically evaluated with Marx rating scale, International Knee Documentation Committee (IKDC) score, and Tegner activity scale at a minimum follow-up (FU) of 4 years. The two groups have homogeneous characteristics: age, sex, type, and level of sports activity. Since November 2012, 59 patients with unilateral ACL insufficiency underwent ACLR: 31 patients using the MHG technique and 28 patients using the DHG technique. In both groups, a significant improvement in the clinical scores of the administered tests was observed. The MHG group reported a higher percentage of normal knees (83.8%) compared with the DHG group (78.6%). IKDC subjective score improved at each FU. Comparing the two techniques, at 12 months' FU the MHG group achieved better IKDC results (89.6) compared with the DHG technique (84.2). Marx and Tegner score values improved over time reaching comparable results at final FU. At final FU, 98% of patients returned to the same preinjury professional sporting level. Both techniques have been able to provide good clinical results. The MHG group, however, had a resumption of sports activity of the same level and intensity slightly longer (6.3 months) than that in the DHG group (5.9 months). Furthermore, the resumption of training and athletic gestures for the type of sport practiced was earlier than the DHG group. However, in the long run the level of sporting activity leveled in both groups, demonstrating the effectiveness of both techniques. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Direct solar-pumped iodine laser amplifier

NASA Technical Reports Server (NTRS)

Han, Kwang S.; Hwang, In H.; Stock, Larry V.

1988-01-01

A XeCl laser which was developed earlier for an iodine laser oscillator was modified in order to increase the output pulse energy of XeCl laser so that the iodine laser output energy could be increased. The electrical circuit of the XeCl laser was changed from a simple capacitor discharge circuit of the XeCl laser to a Marx system. Because of this improvement the output energy from the XeCl laser was increased from 60 mj to 80 mj. Subsequently, iodine laser output energy was increased from 100 mj to 3 mj. On the other hand, the energy storage capability and amplification characteristics of the Vortek solar simulator-pumped amplifier was calculated expecting the calculated amplification factor is about 2 and the energy extraction efficiency is 26 percent due to the very low input energy density to the amplifier. As a result of an improved kinetic modeling for the iodine solar simulator pumped power amplifier, it is found that the I-2 along the axis of the tube affects seriously the gain profile. For the gas i-C3F7I at the higher pressures, the gain will decrease due to the I-2 as the pumping intensity increases, and at these higher pressures an increase in flow velocity will increase the gain.

On the relationship between population growth and social and economic development.

PubMed

Xu, D

1983-01-01

China's population has grown rapidly since 1949, reaching a size of 1,008,170,000 by 1982. Rapid population growth has been encouraged by a high birth rate coupled with low mortality, traditional preference for sons, and the incorrect assumption that man is only a producer and not a consumer. Rapid population growth directly decreases economic development while producing a rapidly increasing labor force requiring an increase in the number of jobs available. Population growth has already reduced arable land from 3 MN in 1949 to 1.5 MN at present and can also cause sanitation and pollution problems. Only by adopting family plnning and the 1 child family can China gradually slow population growth to correspond with economic development; then the state will be able to improve health care and education and, therefore, population quality. China's population policy is not one of NeoMalthusianism, which advocates birth control and late marriage, and assumes the existence of a capitalist system and does not apply to communist systems. Malthus may have attempted to absolve the nourgeoisie from all blame by aiming his preaching against blind reproduction at the poor; he thought that overpopulation would be reduced by pestilence, war, and famine. Protecting capitalism motivated Malthus and other capitalists, but the Chinese want to promote economic development. Marx has refuted Malthus' views on population. While Chinese population policy and NeoMalthusianism agree on advocating birth control and late marriage, their underlying philosophies are different. The author supports laws and policies on fertility and family planning, and feels that population scientists must be involved in all aspects--study, propaganda, and education--relating to family planning.

Generation of nanosecond neutron pulses in vacuum accelerating tubes

NASA Astrophysics Data System (ADS)

Didenko, A. N.; Shikanov, A. E.; Rashchikov, V. I.; Ryzhkov, V. I.; Shatokhin, V. L.

2014-06-01

The generation of neutron pulses with a duration of 1-100 ns using small vacuum accelerating tubes is considered. Two physical models of acceleration of short deuteron bunches in pulse neutron generators are described. The dependences of an instantaneous neutron flux in accelerating tubes on the parameters of pulse neutron generators are obtained using computer simulation. The results of experimental investigation of short-pulse neutron generators based on the accelerating tube with a vacuum-arc deuteron source, connected in the circuit with a discharge peaker, and an accelerating tube with a laser deuteron source, connected according to the Arkad'ev-Marx circuit, are given. In the experiments, the neutron yield per pulse reached 107 for a pulse duration of 10-100 ns. The resultant experimental data are in satisfactory agreement with the results of computer simulation.

Biotechnology and the new right: neoconservatism's red menace.

PubMed

Moreno, Jonathan D; Berger, Sam

2007-10-01

Although the neoconservative movement has come to dominate American conservatism, this movement has its origins in the old Marxist Left. Communists in their younger days, as the founders of neoconservatism, inverted Marxist doctrine by arguing that moral values and not economic forces were the primary movers of history. Yet the neoconservative critique of biotechnology still borrows heavily from Karl Marx and owes more to the German philosopher Martin Heidegger than to the Scottish philosopher and political economist Adam Smith. Loath to identify these sources--or perhaps unaware of them--neoconservatives do not acknowledge these intellectual underpinnings or their implications. Thus, in the final analysis, their critique is incoherent and even internally inconsistent. By not acknowledging and embracing their intellectual roots, neoconservatives are left with a deeply ambivalent and often confused view of biotechnology and the society that gives rise to it.

Emitron: microwave diode

DOEpatents

Craig, G.D.; Pettibone, J.S.; Drobot, A.T.

1982-05-06

The invention comprises a new class of device, driven by electron or other charged particle flow, for producing coherent microwaves by utilizing the interaction of electromagnetic waves with electron flow in diodes not requiring an external magnetic field. Anode and cathode surfaces are electrically charged with respect to one another by electron flow, for example caused by a Marx bank voltage source or by other charged particle flow, for example by a high energy charged particle beam. This produces an electric field which stimulates an emitted electron beam to flow in the anode-cathode region. The emitted electrons are accelerated by the electric field and coherent microwaves are produced by the three dimensional spatial and temporal interaction of the accelerated electrons with geometrically allowed microwave modes which results in the bunching of the electrons and the pumping of at least one dominant microwave mode.

Developing online learning modules in a family medicine residency.

PubMed

Skye, Eric P; Wimsatt, Leslie A; Master-Hunter, Tara A; Locke, Amy B

2011-03-01

Online modules offer an opportunity to overcome barriers to educational delivery. Such approaches can require significant investment dependent on the development model used. There is little in the literature on the formative assessment of design and development. Better understanding is needed to determine effective methods of training and supporting faculty authors. The purpose of this study was to examine the effectiveness of Web-based modules developed by a Department of Family Medicine in delivering instruction to resident learners and to examine perceptions of the design and development process. Participants included 49 resident learners and 28 faculty and staff members as the development team. Data collection involved use of Web-based surveys, participant observation focus groups, and pretesting/posttesting. Frequency distributions and mean comparisons were used to analyze quantitative data. Participant comments were thematically analyzed. Residents felt that modules met their educational goals and contributed to understanding of core content. Pretest/posttest data showed statistical improvement for a majority of modules. The use of Web authoring software for Web-based learning and scheduling time to work on the modules posed the greatest challenges to module authors. Formative assessment methods can provide important information to module developers and support staff to shape training, content development, and improve module ease of use, navigation, and content for resident learners.

Inspiring Climate Education Excellence (ICEE): Developing self-directed professional development modules for secondary science teachers

NASA Astrophysics Data System (ADS)

Buhr, S. M.; Lynds, S. E.; McCaffrey, M. S.; Morton, E.

2010-12-01

Inspiring Climate Education Excellence (ICEE) is a NASA-funded project to develop online course modules and self-directed learning resources aligned with the Essential Principles of Climate Science. Following a national needs assessment survey and a face to face workshop to pilot test topics, a suite of online modules is being developed suitable for self-directed learning by secondary science teachers. Modules are designed around concepts and topics in which teachers express the most interest and need for instruction. Module design also includes attention to effective teaching strategies, such as awareness of student misconceptions, strategies for forestalling controversy and advice from master teachers on implementation and curriculum development. The resources are being developed in partnership with GLOBE, and the National Science Digital Library (NSDL) and is informed by the work of the Climate Literacy and Energy Awareness Network (CLEAN) project. ICEE will help to meet the professional development needs of teachers, including those participating in the GLOBE Student Climate Research Campaign. Modules and self-directed learning resources will be developed and disseminated in partnership with the National Science Digital Library (NSDL). This presentation introduces the needs assessment and pilot workshop data upon which the modules are based, and describes the modules that are available and in development.

Amorphous silicon photovoltaic manufacturing technology, phase 2A

NASA Astrophysics Data System (ADS)

Duran, G.; Mackamul, K.; Metcalf, D.

1995-01-01

Utility Power Group (UPG), and its lower-tier subcontractor, Advanced Photovoltaic Systems, Inc. (APS) have conducted efforts in developing their manufacturing lines. UPG has focused on the automation of encapsulation and termination processes developed in Phase 1. APS has focused on completion of the encapsulation and module design tasks, while continuing the process and quality control and automation projects. The goal is to produce 55 watt (stabilized) EP50 modules in a new facility. In the APS Trenton EUREKA manufacturing facility, APS has: (1) Developed high throughput lamination procedures; (2) Optimized existing module designs; (3) Developed new module designs for architectural applications; (4) Developed enhanced deposition parameter control; (5) Designed equipment required to manufacture new EUREKA modules developed during Phase II; (6) Improved uniformity of thin-film materials deposition; and (7) Improved the stabilized power output of the APS EP50 EUREKA module to 55 watts. In the APS Fairfield EUREKA manufacturing facility, APS has: (1) Introduced the new products developed under Phase 1 into the APS Fairfield EUREKA module production line; (2) Increased the extent of automation in the production line; (3) Introduced Statistical Process Control to the module production line; and (4) Transferred-progress made in the APS Trenton facility into the APS Fairfield facility.

Laser space communication experiment: Modulator technology

NASA Technical Reports Server (NTRS)

Goodwin, F. E.

1973-01-01

Results are presented of a contractual program to develop the modulator technology necessary for a 10.6 micron laser communication system using cadmium telluride as the modulator material. The program consisted of the following tasks: (1) The growth of cadmium telluride crystals of sufficient size and purity and with the necessary optical properties for use as laser modulator rods. (2) Develop a low loss antireflection coating for the cadmium telluride rods. (3) Design and build a modulator capable of 300 MHz modulation. (4) Develop a modulator driver capable of a data rate of 300 MBits/sec, 12 W rms output power, and 40 percent efficiency. (5) Assemble and test the modulator system. All design goals were met and the system was built and tested.

A Firefly Learning Module for Environmental Sustainable Development in Samutsongkhram Province, Thailand

ERIC Educational Resources Information Center

To-Im, Jongdee; Klunklueng, Arunwan

2012-01-01

A firefly learning module for the sustainable development was developed for Thai secondary school students in the study province. A deeper connection between environment, social and economic dimensions, which lies at the core of sustainability, became the key issue for this learning module. Also an important dimension of the module was the…

Equity and Urban Service Distribution, Package XVIII. Module 1; Module 2: Handbook for Analyzing the Distribution of Solid Waste Collection Services; Module 3: Handbook for Analyzing the Distribution of Library Services; Module 4: Handbook for Analyzing the Distribution of Park Services; Module 5: Handbook for Analyzing the Distribution of Police Services.

ERIC Educational Resources Information Center

Lucy, William H.; Mladenka, Kenneth R.

This package contains the student materials for five modules which comprise a portion of the National Training and Development Service Urban Management Curriculum Development Project. These modules focus on the distribution of services in urban areas. Module One presents chapters on service distribution and equity, effectiveness, decision making,…

The Modular Modeling System (MMS): User's Manual

USGS Publications Warehouse

Leavesley, G.H.; Restrepo, Pedro J.; Markstrom, S.L.; Dixon, M.; Stannard, L.G.

1996-01-01

The Modular Modeling System (MMS) is an integrated system of computer software that has been developed to provide the research and operational framework needed to support development, testing, and evaluation of physical-process algorithms and to facilitate integration of user-selected sets of algorithms into operational physical-process models. MMS uses a module library that contains modules for simulating a variety of water, energy, and biogeochemical processes. A model is created by selectively coupling the most appropriate modules from the library to create a 'suitable' model for the desired application. Where existing modules do not provide appropriate process algorithms, new modules can be developed. The MMS user's manual provides installation instructions and a detailed discussion of system concepts, module development, and model development and application using the MMS graphical user interface.

A New Approach to Developing Interactive Software Modules Through Graduate Education

NASA Astrophysics Data System (ADS)

Sanders, Nathan E.; Faesi, Chris; Goodman, Alyssa A.

2014-06-01

Educational technology has attained significant importance as a mechanism for supporting experiential learning of science concepts. However, the growth of this mechanism is limited by the significant time and technical expertise needed to develop such products, particularly in specialized fields of science. We sought to test whether interactive, educational, online software modules can be developed effectively by students as a curriculum component of an advanced science course. We discuss a set of 15 such modules developed by Harvard University graduate students to demonstrate various concepts related to astronomy and physics. Their successful development of these modules demonstrates that online software tools for education and outreach on specialized topics can be produced while simultaneously fulfilling project-based learning objectives. We describe a set of technologies suitable for module development and present in detail four examples of modules developed by the students. We offer recommendations for incorporating educational software development within a graduate curriculum and conclude by discussing the relevance of this novel approach to new online learning environments like edX.

The Development of Multicultural Counselling Competencies (MCC) Training Module Based on MCC Matrix Model by Sue et al. (1992)

ERIC Educational Resources Information Center

Anuar, Azad Athahiri; Rozubi, Norsayyidatina Che; Abdullah, Haslee Sharil

2015-01-01

The aims of this study were to develop and validate a MCC training module for trainee counselor based on MCC matrix model by Sue et al. (1992). This module encompassed five sub modules and 11 activities developed along the concepts and components of the MCC matrix model developed by Sue, Arredondo dan McDavis (1992). The design method used in this…

NREL module energy rating methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitaker, C.; Newmiller, J.; Kroposki, B.

1995-11-01

The goals of this project were to develop a tool for: evaluating one module in different climates; comparing different modules; provide a Q&D method for estimating periodic energy production; provide an achievable module rating; provide an incentive for manufacturers to optimize modules to non-STC conditions; and to have a consensus-based, NREL-sponsored activity. The approach taken was to simulate module energy for five reference days of various weather conditions. A performance model was developed.

Development of Low Cost, High Energy-Per-Unit-Area Solar Cell Modules

NASA Technical Reports Server (NTRS)

Jones, G. T.; Chitre, S.

1977-01-01

Work on the development of low cost, high energy per unit area solar cell modules was conducted. Hexagonal solar cell and module efficiencies, module packing ratio, and solar cell design calculations were made. The cell grid structure and interconnection pattern was designed and the module substrates were fabricated for the three modules to be used. It was demonstrated that surface macrostructures significantly improve cell power output and photovoltaic energy conversion efficiency.

Church, freedom and bolshevisation of Moscow University

NASA Astrophysics Data System (ADS)

Gaina, Alex

2008-05-01

A short description of events, occured in Russia after 1917 with emphasysis on main phyilosophycal curents such as marxism and believing, first of atheistic content and second of christian moralty content is given. It is argued, that bolshevicks contributed to progress of Russia, but this was reached by mean of purges and terror, during which many peoples were killed, especially representatives of the Russian Ortodox church. A list of scientists, which contributed more than other to the bolshevisation of the Russia and Moscow University, particularly, is given. The controverse between Hegel and Einstein from one part and Marx and bolshevicks from other part is examined also. The bolshevicks destroyed the Russian ortodox church, instead of its modernisation, is argued. The Calendar in the Russian Ortodox church is discussed, which is Julian, and it is argued, that a peaceful dialogue between the representatives of the Church and scientists is needed in order to make a transition to the Gregorian one.

Smoothing two-dimensional Malaysian mortality data using P-splines indexed by age and year

NASA Astrophysics Data System (ADS)

Kamaruddin, Halim Shukri; Ismail, Noriszura

2014-06-01

Nonparametric regression implements data to derive the best coefficient of a model from a large class of flexible functions. Eilers and Marx (1996) introduced P-splines as a method of smoothing in generalized linear models, GLMs, in which the ordinary B-splines with a difference roughness penalty on coefficients is being used in a single dimensional mortality data. Modeling and forecasting mortality rate is a problem of fundamental importance in insurance company calculation in which accuracy of models and forecasts are the main concern of the industry. The original idea of P-splines is extended to two dimensional mortality data. The data indexed by age of death and year of death, in which the large set of data will be supplied by Department of Statistics Malaysia. The extension of this idea constructs the best fitted surface and provides sensible prediction of the underlying mortality rate in Malaysia mortality case.

Acceleration of deuterons with suppression of electronic conductance in a vacuum diode with a laser target on the anode

NASA Astrophysics Data System (ADS)

Shikanov, A. E.; Vovchenko, E. D.; Kozlovskii, K. I.; Shatokhin, V. L.

2016-12-01

We report new experimental results on the acceleration of deuterons in a compact coaxial diode with the suppression of electronic conductance by a constant longitudinal magnetic field. Plasma containing deuterons is created on a laser TiD target located on the anode. The pulse of accelerating voltage is formed by means of the Arkad'ev-Marx generator. The cathode symmetrically surrounds the anode and comprises a hollow permanent ring magnet with an inner radius of no more than 0.02 m and an on-axis induction of up to 0.4 T, which provides the magnetic insulation of the accelerating gap. The experiments demonstrate the possibility of obtaining accelerated deuterons with energy of up to 300 keV and a current of up to 0.5 kA with a pulse duration of 0.2 μs.

A history of erotic philosophy.

PubMed

Soble, Alan

2009-01-01

This essay historically explores philosophical views about the nature and significance of human sexuality, starting with the Ancient Greeks and ending with late 20th-century Western philosophy. Important figures from the history of philosophy (and theology) discussed include Sappho, Plato, Aristotle, St. Augustine, St. Jerome, the Pelagians, St. Thomas Aquinas, Michel de Montaigne, Rene Descartes, Thomas Hobbes, David Hume, Immanuel Kant, Søren Kierkegaard, Arthur Schopenhauer, Jeremy Bentham, John Stuart Mill, Karl Marx, Friedrich Engels, Sigmund Freud, Jean-Paul Sartre, Simone de Beauvoir, Wilhelm Reich, and Herbert Marcuse. Contemporary philosophers whose recent work is discussed include Michel Foucault, Thomas Nagel, Roger Scruton, Karol Wojtyla (Pope John Paul II), Catharine MacKinnon, Richard Posner, and John Finnis. To show the unity of the humanities, the writings of various literary figures are incorporated into this history, including Mark Twain, Arthur Miller, James Thurber, E. B. White, Iris Murdoch, and Philip Roth.

The transition from quantity to quality: A neglected causal mechanism in accounting for social evolution

PubMed Central

Carneiro, Robert L.

2000-01-01

Students of social evolution are concerned not only with the general course it has followed, but also with the mechanisms that have brought it about. One such mechanism comes into play when the quantitative increase in some entity, usually population, reaching a certain threshold, gives rise to a qualitative change in the structure of a society. This mechanism, first recognized by Hegel, was seized on by Marx and Engels. However, neither they nor their current followers among anthropologists have made much use of it in attempting to explain social evolution. But as this paper attempts to show, in those few instances when the mechanism has been invoked, it has heightened our understanding of the process of social evolution. And, it is argued, if the mechanism were more widely applied, further understanding of the course of evolution could be expected to result. PMID:11050189

Environmental investigations using diatom microfossils

USGS Publications Warehouse

Smith, Kathryn E.L.; Flocks, James G.

2010-01-01

Diatoms are unicellular phytoplankton (microscopic plant-like organisms) with cell walls made of silica (called a frustule). They live in both freshwater and saltwater and can be found in just about every place on Earth that is wet. The shape and morphology of the diatom frustule unique to each species are used for identification. Due to the microscopic size of diatoms, high-power microscopy is required for diatom identification. Diatoms are vital to life on Earth. They are photosynthetic primary producers, using sunlight to create oxygen and organic carbon from carbon dioxide and water. They are a significant source of the oxygen we breathe, have a major impact on the global carbon cycle (Smetacek, 1999), and are a food source for many aquatic organisms (Mann, 1993). Diatom abundance has even been demonstrated to have an influence on the diversity of larger marine mammals, including whales (Marx and Uhen, 2010). Data on diatom abundance and diversity are extremely useful in environmental studies.

[Between fetishism and survival: are scientific articles a form of academic merchandise?].

PubMed

Castiel, Luis David; Sanz-Valero, Javier

2007-12-01

This article discusses the possible meanings of the intense prevailing concern in academic circles over the notion of research productivity, as reflected in an excess number of articles published in various scientific journals. The numerical accounting of articles published by researchers in scientific journals with renowned academic status serves to legitimize academics in their fields of work, in various ways. In this sense, we suggest that scientific articles take on aspects of merchandise-as-fetish, according to Marx's theory of use-value and exchange-value and Benjamin's exposure value. Meanwhile, the biological notions of selection and evolution are used as metaphorical elements in "bibliographic Darwinism". There are references as to the possibility many of the prevailing bibliometric concerns serve as instruments for econometric analysis, especially to orient and enhance cost-effectiveness analysis in research investments of various orders and types, from the point of view of their economic return.

Training Module on the Development of Best Modeling Practices

EPA Pesticide Factsheets

This module continues the fundamental concepts outlined in the previous modules. Objectives are to identify the ‘best modeling practices’ and strategies for the Development Stage of the model life-cycle and define the steps of model development.

Older Siblings’ Contributions to Young Child’s Cognitive Skills

PubMed Central

Dai, Xianhua; Heckman, James J.

2014-01-01

This work finds that older siblings as well as early parenting influence young children’s cognitive skills directly or indirectly, for example, Mathematics, and English. Our findings challenge a pervasive view in the economical literatures that early parenting play a dominant role in explaining child development. In economics, early environmental conditions are important to demonstrate the evolution of adolescent and adult cognitive skills (Knudsen, Heckman, Cameron, and Shonkoff, 2006; Cunha and Heckman, 2007), and it establishes causal impacts of early parental inputs and other environmental factors on cognitive and non-cognitive skills (Heckman, Stixrud, and Urzua, 2006; Borghans, Duckworth, Heckman, and Weel, 2006; Cunha, Heckman, and Schennach, 2010). Early parenting as well as older siblings should explain a diverse array of academic and social outcomes, for example, Mathematics, English, maritage and pregnancy. In fact, older siblings’ characteristics are as important, if not more important, than parenting for child development. Our analysis addresses the problems of measurement error, imperfect proxies, and reverse causality that plague conventional approach in psychology. We find that older brother contributes much more than older sister to child’s mathematical achievement, while older sister contributes much more to child’s english achievement. Our evidence is consistent with psychology literature, for example, Hetherington (1988), Jenkins (1992), Zukow-Goldring (1995), Marshall, Garcia-Coll, Marx, McCartney, Keffe, and Rub (1997), Maynard (2002), and Brody Ge, Kim, Murry, Simons, Gibbons, Gerrard, and Conger (2003) for siblings’ direct contributions to child development, Bronfenbrenner (1997), East (1998), Whiteman and Buchanan (2002), and Brody, Ge, Kim, Murry, Simons, Gibbons, Gerrard, and Conger (2003) for siblings’s indirect contributions, and Reiss, Neiderhiser, Hetherington, and Plomin (2000), Feinberg and Hetherington (2001), Kowal, Kramer, Krull, and Crick (2002) for parental differential treatment. PMID:25309016

Older Siblings' Contributions to Young Child's Cognitive Skills.

PubMed

Dai, Xianhua; Heckman, James J

2013-09-01

This work finds that older siblings as well as early parenting influence young children's cognitive skills directly or indirectly, for example, Mathematics, and English. Our findings challenge a pervasive view in the economical literatures that early parenting play a dominant role in explaining child development. In economics, early environmental conditions are important to demonstrate the evolution of adolescent and adult cognitive skills (Knudsen, Heckman, Cameron, and Shonkoff, 2006; Cunha and Heckman, 2007), and it establishes causal impacts of early parental inputs and other environmental factors on cognitive and non-cognitive skills (Heckman, Stixrud, and Urzua, 2006; Borghans, Duckworth, Heckman, and Weel, 2006; Cunha, Heckman, and Schennach, 2010). Early parenting as well as older siblings should explain a diverse array of academic and social outcomes, for example, Mathematics, English, maritage and pregnancy. In fact, older siblings' characteristics are as important, if not more important, than parenting for child development. Our analysis addresses the problems of measurement error, imperfect proxies, and reverse causality that plague conventional approach in psychology. We find that older brother contributes much more than older sister to child's mathematical achievement, while older sister contributes much more to child's english achievement. Our evidence is consistent with psychology literature, for example, Hetherington (1988), Jenkins (1992), Zukow-Goldring (1995), Marshall, Garcia-Coll, Marx, McCartney, Keffe, and Rub (1997), Maynard (2002), and Brody Ge, Kim, Murry, Simons, Gibbons, Gerrard, and Conger (2003) for siblings' direct contributions to child development, Bronfenbrenner (1997), East (1998), Whiteman and Buchanan (2002), and Brody, Ge, Kim, Murry, Simons, Gibbons, Gerrard, and Conger (2003) for siblings's indirect contributions, and Reiss, Neiderhiser, Hetherington, and Plomin (2000), Feinberg and Hetherington (2001), Kowal, Kramer, Krull, and Crick (2002) for parental differential treatment.

The design and development of a rectangular, shingle-type photovoltaic module

NASA Astrophysics Data System (ADS)

Shepard, N. F., Jr.

A shingle-type photovoltaic module has been designed and developed to meet the requirements of specifications for residential applications. The module is ideally suited for installation directly to the sheathing of a sloping, south-facing roof of a residential, industrial, or commercial building. The design requirements are examined, taking into account also module safety requirements. Aspects of module design and analysis are discussed, giving attention to installation details, solar cells and electrical circuit design, the encapsulation system, substrate lamination, and the module-to-module interconnecting cable. Details of module assembly experience and test and outdoor exposure experience are also considered.

The design and development of a rectangular, shingle-type photovoltaic module

NASA Technical Reports Server (NTRS)

Shepard, N. F., Jr.

1982-01-01

A shingle-type photovoltaic module has been designed and developed to meet the requirements of specifications for residential applications. The module is ideally suited for installation directly to the sheathing of a sloping, south-facing roof of a residential, industrial, or commercial building. The design requirements are examined, taking into account also module safety requirements. Aspects of module design and analysis are discussed, giving attention to installation details, solar cells and electrical circuit design, the encapsulation system, substrate lamination, and the module-to-module interconnecting cable. Details of module assembly experience and test and outdoor exposure experience are also considered.

Validity of Basic Electronic 1 Module Integrated Character Value Based on Conceptual Change Teaching Model to Increase Students Physics Competency in STKIP PGRI West Sumatera

NASA Astrophysics Data System (ADS)

Hidayati, A.; Rahmi, A.; Yohandri; Ratnawulan

2018-04-01

The importance of teaching materials in accordance with the characteristics of students became the main reason for the development of basic electronics I module integrated character values based on conceptual change teaching model. The module development in this research follows the development procedure of Plomp which includes preliminary research, prototyping phase and assessment phase. In the first year of this research, the module is validated. Content validity is seen from the conformity of the module with the development theory in accordance with the demands of learning model characteristics. The validity of the construct is seen from the linkage and consistency of each module component developed with the characteristic of the integrated learning model of character values obtained through validator assessment. The average validation value assessed by the validator belongs to a very valid category. Based on the validator assessment then revised the basic electronics I module integrated character values based on conceptual change teaching model.

The development of form two mathematics i-Think module (Mi-T2)

NASA Astrophysics Data System (ADS)

Yao, Foo Jing; Abdullah, Mohd Faizal Nizam Lee; Tien, Lee Tien

2017-05-01

This study aims to develop a training module i-THINK Mathematics Form Two (Mi-T2) to increase the higher-order thinking skills of students. The Mi-T2 training module was built based on the Sidek Module Development Model (2001). Constructivist learning theory, cognitive learning theory, i-THINK map and higher order thinking skills were the building blocks of the module development. In this study, researcher determined the validity and reliability of Mi-T2 module. The design being used in this study was descriptive study. To determine the needs of Mi-T2 module, questionnaires and literature review were used to collect data. When the need of the module was determined, the module was built and a pilot study was conducted to test the reliability of the Mi-T2 module. The pilot study was conducted at a secondary school in North Kinta, Perak. A Form Two class was selected to be the sample study through clustered random sampling. The pilot study was conducted for two months and one topic had been studied. The Mi-T2 module was evaluated by five expert panels to determine the content validity of the module. The instruments being used in the study were questionnaires about the necessity of the Mi-T2 module for guidance, questionnaires about the validity of the module and questionnaires concerning the reliability of the module. Statistical analysis was conducted to determine the validity and reliability coefficients of the Mi-T2 module. The content validity of Mi-T2 module was determined by Cohen's Kappa's (1968) agreement coefficient and the reliability of Mi-T2 module was determined by Cronbach Alpha's value scale. The content validity of Mi-T2 module was 0.89 and the Cronbach Alpha's value of Mi-T2 module was 0.911.

Plan for Your Professional Development. Module LT-E-3 of Category E--Professional and Staff Development. Competency-Based Vocational Education Administrator Module Series.

ERIC Educational Resources Information Center

Puleo, Nancy F.; And Others

This module, one in a series of competency-based administrator instructional packages, focuses on a specific competency that vocational education administrators need to be successful in the area of professional and staff development. The purpose of the module is to help administrators to analyze their professional needs and to devise and implement…

Amorphous-silicon module hot-spot testing

NASA Technical Reports Server (NTRS)

Gonzalez, C. C.

1985-01-01

Hot spot heating occurs when cell short-circuit current is lower than string operating current. Amorphous cell hot spot are tested to develop the techniques required for performing reverse bias testing of amorphous cells. Also, to quantify the response of amorphous cells to reverse biasing. Guidelines are developed from testing for reducing hot spot susceptibility of amorphous modules and to develop a qualification test for hot spot testing of amorphous modules. It is concluded that amorphous cells undergo hot spot heating similarly to crystalline cells. Comparison of results obtained with submodules versus actual modules indicate heating levels lower in actual modules. Module design must address hot spot testing and hot spot qualification test conducted on modules showed no instabilities and minor cell erosion.

Flexible, FEP-Teflon covered solar cell module development

NASA Technical Reports Server (NTRS)

Rauschenbach, H. S.; Cannady, M. D.

1976-01-01

Techniques and equipment were developed for the large scale, low-cost fabrication of lightweight, roll-up and fold-up, FEP-Teflon encapsulated solar cell modules. Modules were fabricated by interconnecting solderless single-crystal silicon solar cells and heat laminating them at approximately 300 C between layers of optically clear FEP and to a loadbearing Kapton substrate sheet. Modules were fabricated from both conventional and wraparound contact solar cells. A heat seal technique was developed for mechanically interconnecting modules into an array. The electrical interconnections for both roll-up and fold-up arrays were also developed. The use of parallel-gap resistance welding, ultrasonic bonding, and thermocompression bonding processes for attaching interconnects to solar cells were investigated. Parallel-gap welding was found to be best suited for interconnecting the solderless solar cells into modules. Details of the fabrication equipment, fabrication processes, module and interconnect designs, environmental test equipment, and test results are presented.

Automatic acquisition of domain and procedural knowledge

NASA Technical Reports Server (NTRS)

Ferber, H. J.; Ali, M.

1988-01-01

The design concept and performance of AKAS, an automated knowledge-acquisition system for the development of expert systems, are discussed. AKAS was developed using the FLES knowledge base for the electrical system of the B-737 aircraft and employs a 'learn by being told' strategy. The system comprises four basic modules, a system administration module, a natural-language concept-comprehension module, a knowledge-classification/extraction module, and a knowledge-incorporation module; details of the module architectures are explored.

Model Development of Degradation of PV Modules Backsheet with Locating Place of Module

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kempe, Michael D; Wang, Yu; Fairbrother, Andrew

Performance of a photovoltaic (PV) module is related to the micro-environment around the module. The position of photovoltaic modules in an array row have a large effect on the yellowing and gloss of PV module backsheet exposed in Dfa climatic zone (Gaithersburg, MD) with a polyethylene naphthalate (PEN) outer layer. Stress/Response models of yellowing and gloss-losing as function of location parameters of module, including the shed, row, measurement position in a same module and the distance of module location to the row center, are under development. The module installation height had the greatest influence on degradation of PEN PV backsheetmore » in the Dfa climatic zone. The module backsheets at the end of an array have higher degradation rate (edge effect). The edge effect decreases with increasing of module installation heights.« less

ModuleMiner - improved computational detection of cis-regulatory modules: are there different modes of gene regulation in embryonic development and adult tissues?

PubMed Central

Van Loo, Peter; Aerts, Stein; Thienpont, Bernard; De Moor, Bart; Moreau, Yves; Marynen, Peter

2008-01-01

We present ModuleMiner, a novel algorithm for computationally detecting cis-regulatory modules (CRMs) in a set of co-expressed genes. ModuleMiner outperforms other methods for CRM detection on benchmark data, and successfully detects CRMs in tissue-specific microarray clusters and in embryonic development gene sets. Interestingly, CRM predictions for differentiated tissues exhibit strong enrichment close to the transcription start site, whereas CRM predictions for embryonic development gene sets are depleted in this region. PMID:18394174

Design of smart home terminal controller based on ZigBee

NASA Astrophysics Data System (ADS)

Li, Biqing; Li, Zhao; Zhang, Hongyan

2018-04-01

With the development in scienc and technology, and the improvement of living conditions, people pay more and more attention to the comfort of household life. Therefore, smart home has become the development trend of the future furniture. This design is composed of three blocks: transmitting module, receiving module and data acquisition module. ZigBee and STC89C52 belong to launch module as well as belong to receive module. Launch module contains ZigBee, serial communication module and monolithic STC89C52. The receiving module contains light control parts, curtain control part, ZigBee and microcontroller STC89C52. Data acquisition module includes temperature and humidity detection.

Insight to forcing of late Quaternary climate change from aeolian dust archives in eastern Australia

NASA Astrophysics Data System (ADS)

McGowan, H. A.; Marx, S.; Soderholm, J.; Denholm, J.; Petherick, L.

2010-12-01

The Australian continent is the largest source of dust in the Southern Hemisphere. Historical dust emissions records display inter-annual variability in response to the El Niño Southern Oscillation (ENSO) phenomenon and inter-decadal variability which has been linked to the Pacific Decadal Oscillation (PDO). These reflect change in hydrometeorology of the continents two major dust source regions, the Murray-Darling Basin and the Lake Eyre Basin. The historical records do not allow longer term variability of ENSO and the PDO and their influence on Australia to be quantified. Importantly, sub-Milankovitch centennial to multi-millennial scale climate cycles and their impacts are not represented in the historical records. In this paper we present summary results from the analysis of two aeolain dust records spanning 7 ka and 45 ka. These were developed from ombrotrophic mire and lacustrine sediment cores collected from the Australian Alps and southeast Queensland. Both sites are located in the southeast Australian dust transport pathway and provide rare insight to forcings of climate variability and its impacts on eastern Australia through the late Quaternary. Age controls for the cores were established using 14C and 210Pb dating [McGowan et al. 2008, 2010]. The cores were sliced into 2 to 5 mm segments with a sub-sample of each segment combusted at 450°C for 12 hrs to destroy organic material and allow recovery of mineral dust. Geochemical fingerprinting of the < 90 µm fraction of the dust was used to determine provenance and to account for contamination by fluvial and/or colluvial sediments [Marx et al. 2005]. Analysis of the dust records, proxy for hydrometeorology, identified tropical ocean teleconnections, variability of solar irradiance and change in ocean deep water circulation as the principal causes of inter-decadal to centennial scale climate cycles and change. Predictions of future climate must consider these forcings so that in water scarce regions of Australia the effect on the hydroclimate is incorporated into the design of water allocation policy and infrastructure, and the management of environmental systems. Comparison with ice core records from Greenland and Antarctica indicate both synchronicity of global climate variability and the impact of forcings originating from the North Hemisphere. These results highlight the potential for adverse impacts on the climate of Australia by disturbance to North Atlantic Ocean circulation. References Marx, S. K., et al. 2005: Provenance of long travelled dust determined with ultra trace element composition: A pilot study with samples from New Zealand glaciers. Earth Surf. Processes Landforms, 30, 699-716. McGowan, H.A., et al. 2008: An ultra-high resolution record of aeolian sedimentation during the late Quaternary from eastern Australia. Palaeogeogr. Palaeoclimatol. Palaeoecol., 265(3-4), 171-181. McGowan, H. A., et al. 2010: Evidence of solar and tropical ocean forcing of hydroclimate cycles in southeastern Australia for the past 6500 years. Geophys. Res. Lett., 37, L10705, doi:10.1029/2010GL042918.

Classroom modules for nanotechnology undergraduate education: development, implementation and evaluation

NASA Astrophysics Data System (ADS)

Shabani, R.; Massi, L.; Zhai, L.; Seal, S.; Cho, H. J.

2011-05-01

In order to address the challenges and restrictions given by a traditional classroom lecture environment, the top-down and bottom-up nanotechnology teaching modules were developed, implemented and evaluated. Then based on the hypothesis that instructors could further develop students' interest in this emerging area through the introduction of the teaching modules and a career module, an early stage evaluation of the effectiveness of the modules in selected engineering courses was conducted. The data suggested that adoption of modular lectures in regular engineering courses influenced attitude towards nanotechnology - overall, the teaching modules did a better job of piquing student's interest (albeit in the short term) in the subject, but there were also positive gains in interest in nanotechnology as a career. There was some evidence that the hands-on demonstration teaching modules with visual elements and the career module were more effective than traditional lecture presentations in the classroom.

The economics of fertility.

PubMed

Loraine, J A

1982-01-01

The statement that economics and fertility are closely interrelated is a truism. The classical economists--Adam Smith, Thomas Malthus, Karl Marx, John Stuart Mill and John Maynard Keynes appreciated this fact, and their reviews are recounted and their prescience is assessed. Adam Smith (1723-1790) was primarily concerned with the desire of humankind to better his/her material conditions. Although he did not put forward a specific population policy, the tenet of his writing is pronatalist. Economic advantages would accrue to parents by the production of many children. Yet, underneath Smith's optimism, there was an apocalyptic vision of the distant future, i.e., the "steady state" when resources would be depleted or near exhaustion, when capital accumulation would have ceased, and living standards would be dropping vertiginously. In his 1st "Essay on Population" Malthus maintained that "the power of population is infinitely greater than the power of the earth to produce subsistence of men." Malthus can be complimented on his prescience. There is little question that the planet of today is grossly overpopulated and that a great gulf exists between numbers of people and their aspirations and the resources which the earth can provide for them. Malthus was particularly concerned about the population food dilemma, and that is still much in evidence in 1982. 2 concomitants of overpopulation--excessive urbanization and joblessness--could not be foreseen by Malthus. Marx did not deny the basic tenet promulgated by Malthus but to him this was simply an artifact of capitalist society which required "enormous reserves of proletarians" in order to maintain its odius system. Officially Communist governments remain in a Marxist straitjacket regarding the population issue. Mills approach was strongly antinatalist; he saw little need for an increase in human numbers. Mills was concerned that because of unlimited population growth and wealth the earth would lose much of its pleasantness. Keynes believed and stated in 1922 that the state should control the size of the population just as it did the size of the army and of the budget. His views were heretical then and continue so now for Britain still has no explicit population policy. In the 1930's Keynes wrote that the only way to alter opinion was to set in motion new forces of instruction and imagination, but nowhere in 1982 is there any evidence that such forces exist.

Space polypropulsion

NASA Astrophysics Data System (ADS)

Kellett, B. J.; Griffin, D. K.; Bingham, R.; Campbell, R. N.; Forbes, A.; Michaelis, M. M.

2008-05-01

Hybrid space propulsion has been a feature of most space missions. Only the very early rocket propulsion experiments like the V2, employed a single form of propulsion. By the late fifties multi-staging was routine and the Space Shuttle employs three different kinds of fuel and rocket engines. During the development of chemical rockets, other forms of propulsion were being slowly tested, both theoretically and, relatively slowly, in practice. Rail and gas guns, ion engines, "slingshot" gravity assist, nuclear and solar power, tethers, solar sails have all seen some real applications. Yet the earliest type of non-chemical space propulsion to be thought of has never been attempted in space: laser and photon propulsion. The ideas of Eugen Saenger, Georgii Marx, Arthur Kantrowitz, Leik Myrabo, Claude Phipps and Robert Forward remain Earth-bound. In this paper we summarize the various forms of nonchemical propulsion and their results. We point out that missions beyond Saturn would benefit from a change of attitude to laser-propulsion as well as consideration of hybrid "polypropulsion" - which is to say using all the rocket "tools" available rather than possibly not the most appropriate. We conclude with three practical examples, two for the next decades and one for the next century; disposal of nuclear waste in space; a grand tour of the Jovian and Saturnian moons - with Huygens or Lunoxod type, landers; and eventually mankind's greatest space dream: robotic exploration of neighbouring planetary systems.

Development of Mirror Modules for the ART-XC Instrument

NASA Technical Reports Server (NTRS)

Gubarev, M.; Ramsey, B.; O'Dell, S. L.; Elsner, R.; Kilaru, K.; McCracken, J.; Pavlinsky, M.; Lapshov, I.

2012-01-01

The Marshall Space Flight Center (MSFC) is developing x-ray mirror modules for the ART -XC instrument on board the Spectrum-Roentgen-Gamma Mission under a Reimbursable Agreement between NASA and the Russian Space Research Institute (IKI.) ART-XC will consist of seven co-aligned x-ray mirror modules with seven corresponding CdTe focal plane detectors. Currently, four of the modules are being fabricated by the Marshall Space Flight Center (MSFC.) Each MSFC module provides an effective area of 65 cm2 at 8 keV, response out to 30 keV, and an angular resolution of 45 arcsec or better HPD. We will present a status of the ART x-ray module development at MSFC.

Low cost solar array project production process and equipment task. A Module Experimental Process System Development Unit (MEPSDU)

NASA Technical Reports Server (NTRS)

1981-01-01

Technical readiness for the production of photovoltaic modules using single crystal silicon dendritic web sheet material is demonstrated by: (1) selection, design and implementation of solar cell and photovoltaic module process sequence in a Module Experimental Process System Development Unit; (2) demonstration runs; (3) passing of acceptance and qualification tests; and (4) achievement of a cost effective module.

Development of Mirror Modules for the ART-XC Instrument aboard the Spectrum-Roentgen-Gamma Mission

NASA Technical Reports Server (NTRS)

Gubarev, M; Ramsey, B.; O'Dell, S. L.; Elsner, R.; Kilaru, K.; McCracken, J.; Pavlinsky, M.; Tkachenko, A.; Lapshov, I.; Atkins, C.;

Development of mirror modules for the ART-XC instrument aboard the Spectrum-Roentgen-Gamma mission

NASA Astrophysics Data System (ADS)

Gubarev, M.; Ramsey, B.; O'Dell, S. L.; Elsner, R.; Kilaru, K.; McCracken, J.; Pavlinsky, M.; Tkachenko, A.; Lapshov, I.; Atkins, C.; Zavlin, V.

2013-09-01

The Marshall Space Flight Center (MSFC) is developing x-ray mirror modules for the ART-XC instrument on board the Spectrum-Roentgen Gamma Mission. Four of those modules are being fabricated under a Reimbursable Agreement between NASA and the Russian Space Research Institute (IKI.) An additional three flight modules and one spare for the ART-XC Instrument are produced under a Cooperative Agreement between NASA and IKI. The instrument will consist of seven co-aligned x-ray mirror modules with seven corresponding CdTe focal plane detectors. Each module consists of 28 nested thin Ni/Co shells giving an effective area of 65 cm2 at 8 keV, response out to 30 keV, and an angular resolution of 45 arcsec or better HPD. Delivery of the first four modules is scheduled for November 2013, while the remaining three modules will be delivered to IKI in January 2014. We present a status of the ART x-ray module development at MSFC.

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 32: Intermediate Oscillators; Module 33: Special Devices; Module 34: Linear Integrated Circuits. Students Guide.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This student guidebook is designed for use with the study booklets in modules 32 through 34 included in the military-developed course on basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. An…

Child Development Programs (CDPs)

DTIC Science & Technology

1993-01-19

Child Abuse Training Modules for Caregivers, DoD Child Abuse Training Modules for Family Child Care Providers, DoD Family Child Care Training Modules, DoD CDP Standards and Inspection Checklist, DoD Child Development Need Survey, The DoD School-Age Care Training Modules, and DD Form 2636, DoD Certificate to Operate Child Development Programs, consistent with reference (9). 4. Implements Pub. L. No. 101-189, Title XV (reference (h)). 5. Replaces references (i) through

Medical student retention of embryonic development: impact of the dimensions added by multimedia tutorials.

PubMed

Marsh, Karen R; Giffin, Bruce F; Lowrie, Donald J

2008-01-01

The purpose of this project was to develop Web-based learning modules that combine (1) animated 3D graphics; (2) 3D models that a student can manipulate independently; (3) passage of time in embryonic development; and (4) animated 2D graphics, including 2D cross-sections that represent different "slices" of the embryo, and animate in parallel. These elements were presented in two tutorials, one depicting embryonic folding and the other showing development of the nervous system after neural tube formation. The goal was to enhance the traditional teaching format-lecture combined with printed diagrams, text, and existing computer animations-with customized, guided, Web-based learning modules that surpassed existing resources. To assess module effectiveness, we compared quiz performance of control groups who attended lecture and did not use a supporting module, with study groups who used a module in addition to attending lecture. We also assessed our students' long-term retention of the material, comparing classes who had used the module with students from a previous year that had not seen the module. Our data analysis suggests that students who used a module performed better than those given only traditional resources if they used the module after they were already somewhat familiar with the material. The findings suggest that our modules-and possibly computer-assisted-instruction modules in general-are more useful if used toward the later stages of learning, rather than as an initial resource. Furthermore, our data suggest that the animation aids in long-term retention. Both medical students at the University of Cincinnati and medical faculty from across the country commented favorably on their experiences with the embryonic development modules. Copyright 2008 American Association of Anatomists

Occupational Home Economics Education Series. Securing Employment. Competency Based Teaching Module.

ERIC Educational Resources Information Center

Lowe, Phyllis; And Others

This module, one of ten competency based modules developed for vocational teachers, focuses on securing employment in home economics. It is designed for a variety of levels of learners (secondary, postsecondary, adult) in both school and nonschool educational settings. Five competencies to be developed with this module deal with the meaning of…

Vocational Needs Assessment and Curriculum Development. Vocational Education Curriculum Specialist, Module 7.

ERIC Educational Resources Information Center

Appleby, Judith A.

One of five modules in the curriculum development series designed to train vocational education curriculum specialists, this module is intended for use in classes or individual study arrangements at the preservice or inservice level by students with varying amounts of experience in vocational education. (These modules are revised versions of…

Development of contextual teaching and learning based science module for junior high school for increasing creativity of students

NASA Astrophysics Data System (ADS)

Kurniasari, H.; Sukarmin; Sarwanto

2018-03-01

The purpose of this research are to analyze the the properness of contextual teaching and learning (CTL)-based science module for Junior High School for increasing students’ creativity and using CTL-based science module to increase students’ learning creativity. Development of CTL-based science module for Junior High School is Research and Development (R&D) using 4D Model consist of 4 steps: define, design, develop, and disseminate. Module is validated by 3 expert validators (Material, media, and language experts), 2 reviewer and 1 peer reviewer. . Based on the results of data analysis, it can be concluded that: the results of the validation, the average score of CTL-based science module is 88.28%, the value exceeded the value of the cut off score of 87.5%, so the media declared eligible for the study. Research shows that the gain creativity class that uses CTL-based science module has a gain of 0.72. Based on the results of the study showed that CTL-based science module effectively promotes creativity of students

Development of a mobile borehole investigation software using augmented reality

NASA Astrophysics Data System (ADS)

Son, J.; Lee, S.; Oh, M.; Yun, D. E.; Kim, S.; Park, H. D.

2015-12-01

Augmented reality (AR) is one of the most developing technologies in smartphone and IT areas. While various applications have been developed using the AR, there are a few geological applications which adopt its advantages. In this study, a smartphone application to manage boreholes using AR has been developed. The application is consisted of three major modules, an AR module, a map module and a data management module. The AR module calculates the orientation of the device and displays nearby boreholes distributed in three dimensions using the orientation. This module shows the boreholes in a transparent layer on a live camera screen so the user can find and understand the overall characteristics of the underground geology. The map module displays the boreholes on a 2D map to show their distribution and the location of the user. The database module uses SQLite library which has proper characteristics for mobile platforms, and Binary XML is adopted to enable containing additional customized data. The application is able to provide underground information in an intuitive and refined forms and to decrease time and general equipment required for geological field investigations.

Development and performance of pulse-width-modulated static inverter and converter modules

NASA Technical Reports Server (NTRS)

Pittman, P. F.; Gourash, F.; Birchenough, A. G.; Pittman, P. F.; Ravas, R. J.; Hall, W. G.

1971-01-01

Pulse-width-modulated inverter and converter modules are being developed for modular aerospace electrical power systems. The modules, rate 2.5 kilowatts per module and 10-minute - 150-percent overload, operate from 56 volts dc. The converter module provides two output voltages: a nominal link voltage of 200 volts dc when used with the inverter, and 150 volts dc to a load bus when used separately. The inverter module output is 400-hertz, sinusoidal, three-phase, 120/208 volts. Tests of breadboard models with standard parts and integrated circuits show rated power efficiencies of 71.4 and 85.1 percent and voltage regulation of 5 and 3.1 percent for inverter and converter modules, respectively. Sine-wave output distortion is 0.74 percent.

Development of Mirror Modules for the ART-XC Instrument aboard the Spectrum-Roentgen-Gamma Mission

NASA Technical Reports Server (NTRS)

Gubarev, Mikhail V.; Ramsey, Brian; O'Dell, Stephen L.; Elsner, Ronald F.; Kilaru, Kiranmayee; Atkins, Carolyn; Pavlinskiy, Mikhail N.; Tkachenko, Alexey V.; Lapshov, Igor Y.

2013-01-01

The Marshall Space Flight Center (MSFC) is developing x-ray mirror modules for the Astronomical Roengen Telescope- X-ray Concentrator (ART-XC) instrument on board the Spectrum-Roentgen-Gamma Mission. ART-XC will consist of seven co-aligned x-ray mirror modules with seven corresponding CdTe focal plane detectors. Each module provides an effective area of 65 sq cm at 8 keV, response out to 30 keV, and an angular resolution of 45 arcsec or better HPD. We will present a status of the ART x-ray module development at MSFC.

Development of Japanese experiment module remote manipulator system

NASA Technical Reports Server (NTRS)

Matsueda, Tatsuo; Kuwao, Fumihiro; Motohasi, Shoichi; Okamura, Ryo

1994-01-01

National Space Development Agency of Japan (NASDA) is developing the Japanese Experiment Module (JEM), as its contribution to the International Space Station. The JEM consists of the pressurized module (PM), the exposed facility (EF), the experiment logistics module pressurized section (ELM-PS), the experiment logistics module exposed section (ELM-ES) and the Remote Manipulator System (RMS). The JEMRMS services for the JEM EF, which is a space experiment platform, consists of the Main Arm (MA), the Small Fine Arm (SFA) and the RMS console. The MA handles the JEM EF payloads, the SFA and the JEM element, such as ELM-ES.

Pittsburgh Science Technology Society Project: Instruction Modules. Interrelationships Science--Technology--Society.

ERIC Educational Resources Information Center

O'Brien, George, Ed.

This collection of instruction modules studies the interactions of science, technology, and society (STS) using five activity sets. The introduction module includes activities which show students the STS relationships in their world, develop good organizational skills, develop an understanding of who and what a scientist is, develop graphing…

Survival Skills. Pre-Apprenticeship Phase 2 Training. Instructors Guide

ERIC Educational Resources Information Center

Lane Community Coll., Eugene, OR.

This instructor's guide contains the 43 Survival Skills modules developed for Pre-Apprenticeship Phase 2 Training. Introductory materials include a description of components of the pre-apprenticeship project, recommendations for module implementation, and synopses of the modules that were developed to prompt social skills development. Each module…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 21: Basic Transistor Theory; Module 21T: Multi-Element Vacuum Tubes. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This set of individualized learning modules on transistor theory is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Two modules are included in…

Using Participatory Action Research to Develop a Course Module on Education for Sustainable Development in Pre-Service Chemistry Teacher Education

ERIC Educational Resources Information Center

Burmeister, Mareike; Eilks, Ingo

2013-01-01

This paper describes the development of a course module on sustainability issues and Education for Sustainable Development in German pre-service chemistry teacher education. The module was inspired by empirical research findings about the knowledge base of student teachers. It was created and cyclically refined using Participatory Action Research.…

Intercultural Learning--An Undergraduate Module Supporting the Development of Students' Cultural Awareness in International Settings

ERIC Educational Resources Information Center

Colaiacomo, Silvia; Puntil, Donata

2018-01-01

This report illustrates the context and development of the Intercultural Learning module, provided by the Modern Language Centre (MLC), King's College London. The Intercultural Learning Module is a one semester undergraduate course mostly attended by visiting study abroad students. The module aims to enhance students' intercultural awareness and…

Career Planning Modules for the Officer Career Information and Planning System.

ERIC Educational Resources Information Center

Phillips, Susan D.; And Others

This discussion of the modules in an experimental computer-aided system for officer career information and planning system (OCIPS) includes the reasons for its development, a description of the seven modules, and the findings of a preliminary test of four of the modules for feasibility and credibility. Initially developed in response to a need…

Food Service Worker. Instructional Modules for Food Management, Production and Services. Modules 1-17. Competency Based Curriculum.

ERIC Educational Resources Information Center

Tennessee Univ., Knoxville. Dept. of Vocational-Technical Education.

These 17 teacher modules are part of a curriculum dealing with food management, production, and services that was developed for use in secondary and postsecondary vocational programs in Tennessee. Covered in the individual modules are food service careers, math skills, reading and converting recipes, work simplification, self-development,…

Towards a Comprehensive Computational Simulation System for Turbomachinery

NASA Technical Reports Server (NTRS)

Shih, Ming-Hsin

1994-01-01

The objective of this work is to develop algorithms associated with a comprehensive computational simulation system for turbomachinery flow fields. This development is accomplished in a modular fashion. These modules includes grid generation, visualization, network, simulation, toolbox, and flow modules. An interactive grid generation module is customized to facilitate the grid generation process associated with complicated turbomachinery configurations. With its user-friendly graphical user interface, the user may interactively manipulate the default settings to obtain a quality grid within a fraction of time that is usually required for building a grid about the same geometry with a general-purpose grid generation code. Non-Uniform Rational B-Spline formulations are utilized in the algorithm to maintain geometry fidelity while redistributing grid points on the solid surfaces. Bezier curve formulation is used to allow interactive construction of inner boundaries. It is also utilized to allow interactive point distribution. Cascade surfaces are transformed from three-dimensional surfaces of revolution into two-dimensional parametric planes for easy manipulation. Such a transformation allows these manipulated plane grids to be mapped to surfaces of revolution by any generatrix definition. A sophisticated visualization module is developed to al-low visualization for both grid and flow solution, steady or unsteady. A network module is built to allow data transferring in the heterogeneous environment. A flow module is integrated into this system, using an existing turbomachinery flow code. A simulation module is developed to combine the network, flow, and visualization module to achieve near real-time flow simulation about turbomachinery geometries. A toolbox module is developed to support the overall task. A batch version of the grid generation module is developed to allow portability and has been extended to allow dynamic grid generation for pitch changing turbomachinery configurations. Various applications with different characteristics are presented to demonstrate the success of this system.

Development of a front-end analog circuit for multi-channel SiPM readout and performance verification for various PET detector designs

NASA Astrophysics Data System (ADS)

Ko, Guen Bae; Yoon, Hyun Suk; Kwon, Sun Il; Lee, Chan Mi; Ito, Mikiko; Hong, Seong Jong; Lee, Dong Soo; Lee, Jae Sung

2013-03-01

Silicon photomultipliers (SiPMs) are outstanding photosensors for the development of compact imaging devices and hybrid imaging systems such as positron emission tomography (PET)/ magnetic resonance (MR) scanners because of their small size and MR compatibility. The wide use of this sensor for various types of scintillation detector modules is being accelerated by recent developments in tileable multichannel SiPM arrays. In this work, we present the development of a front-end readout module for multi-channel SiPMs. This readout module is easily extendable to yield a wider detection area by the use of a resistive charge division network (RCN). We applied this readout module to various PET detectors designed for use in small animal PET/MR, optical fiber PET/MR, and double layer depth of interaction (DOI) PET. The basic characteristics of these detector modules were also investigated. The results demonstrate that the PET block detectors developed using the readout module and tileable multi-channel SiPMs had reasonable performance.

Floating-Point Modules Targeted for Use with RC Compilation Tools

NASA Technical Reports Server (NTRS)

Sahin, Ibrahin; Gloster, Clay S.

2000-01-01

Reconfigurable Computing (RC) has emerged as a viable computing solution for computationally intensive applications. Several applications have been mapped to RC system and in most cases, they provided the smallest published execution time. Although RC systems offer significant performance advantages over general-purpose processors, they require more application development time than general-purpose processors. This increased development time of RC systems provides the motivation to develop an optimized module library with an assembly language instruction format interface for use with future RC system that will reduce development time significantly. In this paper, we present area/performance metrics for several different types of floating point (FP) modules that can be utilized to develop complex FP applications. These modules are highly pipelined and optimized for both speed and area. Using these modules, and example application, FP matrix multiplication, is also presented. Our results and experiences show, that with these modules, 8-10X speedup over general-purpose processors can be achieved.

The Development of COBOL and RPG Instructional Modules to Audit Computerized Accounting Systems.

ERIC Educational Resources Information Center

Skudrna, Vincent J.

1982-01-01

Details steps involved (as found in the literature) in the systems approach to design and develop instruction in order to provide a rationale for the development of instructional modules in COBOL and RPG to teach accounting students how to audit computerized accounting systems. Outlines of two modules are appended. (EAO)

78 FR 17220 - Request for Information (RFI) Regarding the Planned Biotechnology Development Module (BDM) As...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-20

... DEPARTMENT OF HOMELAND SECURITY [Docket No. DHS-2013-0018] Request for Information (RFI) Regarding the Planned Biotechnology Development Module (BDM) As Part of the National Bio and Agro-Defense... Development Module (BDM) a planned component of the National Bio and Agro-Defense Facility (NBAF) and...

The Preliminary Results of GMSTech: A Software Development for Microseismic Characterization

NASA Astrophysics Data System (ADS)

Rohaman, Maman; Suhendi, Cahli; Verdhora Ry, Rexha; Sugiartono Prabowo, Billy; Widiyantoro, Sri; Nugraha, Andri Dian; Yudistira, Tedi; Mujihardi, Bambang

2017-04-01

The processing of microseismic data requires reliable software for imaging the condition of subsurface related to occurring microseismicity. In general, the currently available software is only specific for certain processing module and developed by the different developer. However, the software with integrated processing modules will give a better value because the users can use it easier and faster. We developed GMSTech (Ganesha Microseismic Technology), a C# language-based standing-alone software consisting several modules for processing of microseismic data. Its function is to solve a non-linear inverse problem and imaging the subsurface. C# library is supported by ILNumerics to reduce time consumption and give good visualization. In this preliminary result, we will present four developed modules: (1) hypocenter determination, (2) moment magnitude calculation, and (3) 3D seismic tomography. In the first module, we provide four methods for locating the microseismic events that can be chosen by a user independently: simulated annealing method, guided grid-search method, Geiger’s method, and joint hypocenter determination (JHD). The second module can be used for calculating moment magnitude using Brune method and to estimate the released energy of the event. At last, we also provided the module of 3-D seismic tomography for imaging the velocity structures based on delay time tomography. We demonstrated the software using both a synthetic data and a real data from a certain geothermal field in Indonesia. The results for all modules are reliable and remarkable, reviewed statistically by RMS error. We will keep examining the software using another set of data and developing further modules of processing.

Status and Trend of Automotive Power Packaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liang, Zhenxian

2012-01-01

Comprehensive requirements in aspects of cost, reliability, efficiency, form factor, weight, and volume for power electronics modules in modern electric drive vehicles have driven the development of automotive power packaging technology intensively. Innovation in materials, interconnections, and processing techniques is leading to enormous improvements in power modules. In this paper, the technical development of and trends in power module packaging are evaluated by examining technical details with examples of industrial products. The issues and development directions for future automotive power module packaging are also discussed.

Design and fabrication of solar cell modules

NASA Technical Reports Server (NTRS)

Shaughnessy, T. P.

1978-01-01

A program conducted for design, fabrication and evaluation of twelve silicon solar cell modules is described. The purpose of the program was to develop a module design consistent with the requirements and objectives of JPL specification and to also incorporate elements of new technologies under development to meet LSSA Project goals. Module development emphasized preparation of a technically and economically competitive design based upon utilization of ion implanted solar cells and a glass encapsulation system. The modules fabricated, tested and delivered were of nominal 2 X 2 foot dimensions and 20 watt minimum rating. Basic design, design rationale, performance and results of environmental testing are described.

Development of frequency modulation reflectometer for KSTAR tokamak: Data analysis based on Gaussian derivative waveleta)

NASA Astrophysics Data System (ADS)

Seo, Seong-Heon; Lee, K. D.

2012-10-01

A frequency modulation reflectometer has been developed to measure the density profile of the KSTAR tokamak. It has two channels operating in X-mode in the frequency range of Q band (33-50 GHz) and V band (50-75 GHz). The full band is swept in 20 μs. The mixer output is directly digitized at the sampling rate of 100 MSamples/s. A new phase detection algorithm is developed to analyze both amplitude and frequency modulated signal. The algorithm is benchmarked for a synthesized amplitude modulation-frequency modulation signal. This new algorithm is applied to the data analysis of KSTAR reflectometer.

Using Instructional Design, Analyze, Design, Develop, Implement, and Evaluate, to Develop e-Learning Modules to Disseminate Supported Employment for Community Behavioral Health Treatment Programs in New York State.

PubMed

Patel, Sapana R; Margolies, Paul J; Covell, Nancy H; Lipscomb, Cristine; Dixon, Lisa B

2018-01-01

Implementation science lacks a systematic approach to the development of learning strategies for online training in evidence-based practices (EBPs) that takes the context of real-world practice into account. The field of instructional design offers ecologically valid and systematic processes to develop learning strategies for workforce development and performance support. This report describes the application of an instructional design framework-Analyze, Design, Develop, Implement, and Evaluate (ADDIE) model-in the development and evaluation of e-learning modules as one strategy among a multifaceted approach to the implementation of individual placement and support (IPS), a model of supported employment for community behavioral health treatment programs, in New York State. We applied quantitative and qualitative methods to develop and evaluate three IPS e-learning modules. Throughout the ADDIE process, we conducted formative and summative evaluations and identified determinants of implementation using the Consolidated Framework for Implementation Research (CFIR). Formative evaluations consisted of qualitative feedback received from recipients and providers during early pilot work. The summative evaluation consisted of levels 1 and 2 (reaction to the training, self-reported knowledge, and practice change) quantitative and qualitative data and was guided by the Kirkpatrick model for training evaluation. Formative evaluation with key stakeholders identified a range of learning needs that informed the development of a pilot training program in IPS. Feedback on this pilot training program informed the design document of three e-learning modules on IPS: Introduction to IPS, IPS Job development, and Using the IPS Employment Resource Book . Each module was developed iteratively and provided an assessment of learning needs that informed successive modules. All modules were disseminated and evaluated through a learning management system. Summative evaluation revealed that learners rated the modules positively, and self-report of knowledge acquisition was high (mean range: 4.4-4.6 out of 5). About half of learners indicated that they would change their practice after watching the modules (range: 48-51%). All learners who completed the level 1 evaluation demonstrated 80% or better mastery of knowledge on the level 2 evaluation embedded in each module. The CFIR was used to identify implementation barriers and facilitators among the evaluation data which facilitated planning for subsequent implementation support activities in the IPS initiative. Instructional design approaches such as ADDIE may offer implementation scientists and practitioners a flexible and systematic approach for the development of e-learning modules as a single component or one strategy in a multifaceted approach for training in EBPs.

The Marshall Space Flight Center Development of Mirror Modules for the ART-XC Instrument aboard the Spectrum-Roentgen-Gamma Mission

NASA Technical Reports Server (NTRS)

Gubarev, Mikhail V.; Ramsey, B.; ODell, S. L.; Elsner, R.; Kilaru, K.; McCracken, J.; Pavlinsky, M.; Tkachenko, A.; Lapshov, I.

2012-01-01

The Marshall Space Flight Center (MSFC) is developing x-ray mirror modules for the ART-XC instrument on board the Spectrum-Roentgen Gamma Mission under a Reimbursable Agreement between NASA and the Russian Space Research Institute (IKI.) ART-XC will consist of seven co-aligned x-ray mirror modules with seven corresponding CdTe focal plane detectors. Currently, four of the modules are being fabricated by the Marshall Space Flight Center (MSFC.) Each MSFC module consist of 28 nested Ni/Co thin shells giving an effective area of 65 sq cm at 8 keV, response out to 30 keV, and an angular resolution of 45 arcsec or better HPD. Delivery of these modules to the IKI is scheduled for summer 2013. We present a status of the ART x-ray modules development at the MSFC.

The Marshall Space Flight Center development of mirror modules for the ART-XC instrument aboard the Spectrum-Roentgen-Gamma mission

NASA Astrophysics Data System (ADS)

Gubarev, M.; Ramsey, B.; O'Dell, S. L.; Elsner, R.; Kilaru, K.; McCracken, J.; Pavlinsky, M.; Tkachenko, A.; Lapshov, I.

2012-09-01

The Marshall Space Flight Center (MSFC) is developing x-ray mirror modules for the ART-XC instrument on board the Spectrum-Roentgen-Gamma Mission under a Reimbursable Agreement between NASA and the Russian Space Research Institute (IKI.) ART-XC will consist of seven co-aligned x-ray mirror modules with seven corresponding CdTe focal plane detectors. Currently, four of the modules are being fabricated by the Marshall Space Flight Center (MSFC.) Each MSFC module consist of 28 nested Ni/Co thin shells giving an effective area of 65 cm2 at 8 keV, response out to 30 keV, and an angular resolution of 45 arcsec or better HPD. Delivery of these modules to the IKI is scheduled for summer 2013. We present a status of the ART x-ray modules development at the MSFC.

[Development of a French-language online health policy course: an international collaboration].

PubMed

Hébert, Réjean; Coppieters, Yves; Pradier, Christian; Williams-Jones, Bryn; Brahimi, Cora; Farley, Céline

2017-01-01

To present the process and challenges of developing an online competency-based course on public health policy using a collaborative international approach. Five public health experts, supported by an expert in educational technology, adopted a rigorous approach to the development of the course: a needs analysis, identification of objectives and competencies, development of a pedagogical scenario for each module and target, choice of teaching methods and learning activities, material to be identified or developed, and the responsibilities and tasks involved. The 2-credit (90-hour) graduate course consists of six modules including an integration module. The modules start with a variety of case studies: tobacco law (neutral packaging), supervised injection sites, housing, integrated services for the frail elderly, a prevention programme for mothers from disadvantaged backgrounds, and the obligatory use of bicycle helmets. In modules 1, 3, 4 and 5, students learn about different stages of the public policy development process: emergence, formulation and adoption, implementation and evaluation. Module 2 focuses on the importance of values and ideologies in public policy. The integration module allows the students to apply the knowledge learned and addresses the role of experts in public policy and ethical considerations. The course has been integrated into the graduate programmes of the participating universities and allows students to follow, at a distance, an innovative training programme.

A Standardized Certification Program for Case Managers Serving Frail Elderly Texans. Module II: Assessment and Care Plan Development.

ERIC Educational Resources Information Center

Lusky, Richard A.; And Others

This learning module is one of three training modules that were developed for members of the Texas Gerontological Consortium for Continuing Education to use in preparing case managers working in human service professions coordinating community-based programs for frail elderly Texans. Module II deals with the following topics: assessment (role of…

Apollo experience report: Lunar module communications system

NASA Technical Reports Server (NTRS)

Dietz, R. H.; Rhoades, D. E.; Davidson, L. J.

1972-01-01

The development of the lunar module communications system is traced from the initial concept to the operational system used on manned lunar missions. The problems encountered during the development, the corrective actions taken, and recommendations for similar equipment in future programs are included. The system was designed to provide communications between the lunar module and the manned space flight network, between the lunar module and the command and service module, and between the lunar module and the extravehicular crewmen. The system provided the equipment necessary for voice, telemetry, and television communications; ranging information; and various communications links.

Passive thermal regulation of flat PV modules by coupling the mechanisms of evaporative and fin cooling

NASA Astrophysics Data System (ADS)

Chandrasekar, M.; Senthilkumar, T.

2016-07-01

A passive thermal regulation technique with fins in conjunction with cotton wicks is developed in the present work for controlling the temperature of PV module during its operation. Experiments were conducted with the developed technique in the location of Tiruchirappalli (78.6°E and 10.8°N), Tamil Nadu, India with flat 25 Wp PV module and its viability was confirmed. The PV module temperature got reduced by 12 % while the electrical yield is increased by 14 % with the help of the developed cooling system. Basic energy balance equation applicable for PV module was used to evaluate the module temperatures and a fair agreement was obtained between the theoretical and experimental values for the cases of with cooling and without cooling.

The Design and Implementation of NASA's Advanced Flight Computing Module

NASA Technical Reports Server (NTRS)

Alkakaj, Leon; Straedy, Richard; Jarvis, Bruce

1995-01-01

This paper describes a working flight computer Multichip Module developed jointly by JPL and TRW under their respective research programs in a collaborative fashion. The MCM is fabricated by nCHIP and is packaged within a 2 by 4 inch Al package from Coors. This flight computer module is one of three modules under development by NASA's Advanced Flight Computer (AFC) program. Further development of the Mass Memory and the programmable I/O MCM modules will follow. The three building block modules will then be stacked into a 3D MCM configuration. The mass and volume of the flight computer MCM achieved at 89 grams and 1.5 cubic inches respectively, represent a major enabling technology for future deep space as well as commercial remote sensing applications.

Effect of Career Education Module on Career Development of Community College Students

ERIC Educational Resources Information Center

Talib, Jasmi A.; Salleh, Amla; Amat, Salleh; Ghavifekr, Simin; Ariff, Azlinda M.

2015-01-01

Using a pre-post and control group design, we examined the effect of a career education module on career development among a group of 122 community college students in Malaysia. The effect of gender and the interaction effect of gender and career education module on career development were also investigated. MANOVA analyses showed significant…

Development and pilot testing of an online module for ethics education based on the Nigerian National Code for Health Research Ethics.

PubMed

Ogunrin, Olubunmi A; Ogundiran, Temidayo O; Adebamowo, Clement

2013-01-02

The formulation and implementation of national ethical regulations to protect research participants is fundamental to ethical conduct of research. Ethics education and capacity are inadequate in developing African countries. This study was designed to develop a module for online training in research ethics based on the Nigerian National Code of Health Research Ethics and assess its ease of use and reliability among biomedical researchers in Nigeria. This was a three-phased evaluation study. Phase one involved development of an online training module based on the Nigerian Code of Health Research Ethics (NCHRE) and uploading it to the Collaborative Institutional Training Initiative (CITI) website while the second phase entailed the evaluation of the module for comprehensibility, readability and ease of use by 45 Nigerian biomedical researchers. The third phase involved modification and re-evaluation of the module by 30 Nigerian biomedical researchers and determination of test-retest reliability of the module using Cronbach's alpha. The online module was easily accessible and comprehensible to 95% of study participants. There were significant differences in the pretest and posttest scores of study participants during the evaluation of the online module (p = 0.001) with correlation coefficients of 0.9 and 0.8 for the pretest and posttest scores respectively. The module also demonstrated excellent test-retest reliability and internal consistency as shown by Cronbach's alpha coefficients of 0.92 and 0.84 for the pretest and posttest respectively. The module based on the Nigerian Code was developed, tested and made available online as a valuable tool for training in cultural and societal relevant ethical principles to orient national and international biomedical researchers working in Nigeria. It would complement other general research ethics and Good Clinical Practice modules. Participants suggested that awareness of the online module should be increased through seminars, advertisement on government websites and portals used by Nigerian biomedical researchers, and incorporation of the Code into the undergraduate medical training curriculum.

Design and development of a work robot to place ATLAS SCT modules onto barrel cylinders

NASA Astrophysics Data System (ADS)

Terada, S.; Kobayashi, H.; Sengoku, H.; Kato, Y.; Hara, K.; Honma, F.; Ikegami, Y.; Iwata, Y.; Kohriki, T.; Kondo, T.; Nakano, I.; Takashima, R.; Tanaka, R.; Ujiie, N.; Unno, Y.; Yasuda, S.

2005-04-01

More than 2000 silicon modules need to be placed and fastened on the ATLAS SCT barrel tracker. A semi-automatic pick-and-place work robot was designed and developed to cope with the module placement for the SCT barrel assembly. We found that this robot could place modules to a mechanical precision of better than 25 μm.

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 25: Special Devices. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on special devices is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Two lessons are included in the module:…

Macroeconomic Activity Module - NEMS Documentation

EIA Publications

2016-01-01

Documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Macroeconomic Activity Module (MAM) used to develop the Annual Energy Outlook for 2016 (AEO2016). The report catalogues and describes the module assumptions, computations, methodology, parameter estimation techniques, and mainframe source code

Development of a 150-GHz MMIC Module Prototype for Large-Scale CMB Radiation

NASA Technical Reports Server (NTRS)

Kangaslahti, Pekka P.; Samoska, Lorene A.; Gaier, Todd C.; Soria, Mary M.; Lau, Judy M.; Sieth, Matthew M.; VanWinkle, Daniel; Tantawi, Sami

2011-01-01

HEMT-based receiver arrays with excellent noise and scalability are already starting to be manufactured at 100 GHz, but the advances in technology should make it possible to develop receiver modules with even greater operation frequency up to 200 GHz. A prototype heterodyne amplifier module has been developed for operation from 140 to 170 GHz using monolithic millimeter-wave integrated circuit (MMIC) low-noise InP high electron mobility transistor (HEMT) amplifiers. The compact, scalable module is centered on the 150-GHz atmospheric window using components known to operate well at these frequencies. Arrays equipped with hundreds of these modules can be optimized for many different astrophysical measurement techniques, including spectroscopy and interferometry. This module is a heterodyne receiver module that is extremely compact, and makes use of 35-nm InP HEMT technology, and which has been shown to have excellent noise temperatures when cooled cryogenically to 30 K. This reduction in system noise over prior art has been demonstrated in commercial mixers (uncooled) at frequencies of 160-180 GHz. The module is expected to achieve a system noise temperature of 60 K when cooled. An MMIC amplifier module has been designed to demonstrate the feasibility of expanding heterodyne amplifier technology to the 140 to 170-GHz frequency range for astronomical observations. The miniaturization of many standard components and the refinement of RF interconnect technology have cleared the way to mass-production of heterodyne amplifier receivers, making it a feasible technology for many large-population arrays. This work furthers the recent research efforts in compact coherent receiver modules, including the development of the Q/U Imaging ExperimenT (QUIET) modules centered at 40 and 90 GHz, and the production of heterodyne module prototypes at 90 GHz.

Module for Interns in Medical Ethics: A Developmental Diegesis.

PubMed

Mahajan, Rajiv; Goyal, Parmod Kumar; Sidhu, Tanvir Kaur; Kaur, Upinder; Kaur, Sandeep; Gupta, Vitull

2017-12-01

Media report is rife with incidences of doctor-patients' conflict, and this partly is due to communication gap and unethical practices being adopted by the doctors. Our regular curriculum fails to impart any training in ethical issues in patient care. Imparting training to students in these soft-skills is the need of the hour. To develop a module for interns in medical ethics (MIME) in patient care, validate it and pilot run the module for standardization. After conducting faculty development workshop in curriculum designing and three rounds of Delphi with alumni, a module in medical ethics was developed and peer validated. The questionnaire for pilot run, questionnaire for future use of module delivery and pre- and post-test were also peer validated. The module was delivered to 17 interns as pilot run in the form of 4 days' workshop. After pilot run, the module was standardized to 10 broad topics and 3 days' workshop. The questionnaire for future delivery of module in regular routine was also validated during pilot run. Twenty-five faculty members participated in 1 day faculty development workshop and 59 alumni completed three rounds of Delphi. After peer review by five experts, a module of 11 broad areas was developed and was pilot run on 17 interns. Based on the feedback from pilot run, a standardized, validated 18 h teaching MIME in patient care was developed. Pilot study proves that curriculum innovation in the form of medical ethics training to interns; when as undergraduate students, they actively participate in patient care under supervision will go a long way in inculcating soft skills like ethics, compassion and communication in them.

Development of 6-DOF painting robot control system

NASA Astrophysics Data System (ADS)

Huang, Junbiao; Liu, Jianqun; Gao, Weiqiang

2017-01-01

With the development of society, the spraying technology of manufacturing industry in China has changed from the manual operation to the 6-DOF (Degree Of Freedom)robot automatic spraying. Spraying painting robot can not only complete the work which does harm to human being, but also improve the production efficiency and save labor costs. Control system is the most critical part of the 6-DOF robots, however, there is still a lack of relevant technology research in China. It is very necessary to study a kind of control system of 6-DOF spraying painting robots which is easy to operation, and has high efficiency and stable performance. With Googol controller platform, this paper develops programs based on Windows CE embedded systems to control the robot to finish the painting work. Software development is the core of the robot control system, including the direct teaching module, playback module, motion control module, setting module, man-machine interface, alarm module, log module, etc. All the development work of the entire software system has been completed, and it has been verified that the entire software works steady and efficient.

Current Status of Japan's Activity for GPM/DPR and Global Rainfall Map algorithm development

NASA Astrophysics Data System (ADS)

Kachi, M.; Kubota, T.; Yoshida, N.; Kida, S.; Oki, R.; Iguchi, T.; Nakamura, K.

2012-04-01

The Global Precipitation Measurement (GPM) mission is composed of two categories of satellites; 1) a Tropical Rainfall Measuring Mission (TRMM)-like non-sun-synchronous orbit satellite (GPM Core Observatory); and 2) constellation of satellites carrying microwave radiometer instruments. The GPM Core Observatory carries the Dual-frequency Precipitation Radar (DPR), which is being developed by the Japan Aerospace Exploration Agency (JAXA) and the National Institute of Information and Communications Technology (NICT), and microwave radiometer provided by the National Aeronautics and Space Administration (NASA). GPM Core Observatory will be launched in February 2014, and development of algorithms is underway. DPR Level 1 algorithm, which provides DPR L1B product including received power, will be developed by the JAXA. The first version was submitted in March 2011. Development of the second version of DPR L1B algorithm (Version 2) will complete in March 2012. Version 2 algorithm includes all basic functions, preliminary database, HDF5 I/F, and minimum error handling. Pre-launch code will be developed by the end of October 2012. DPR Level 2 algorithm has been developing by the DPR Algorithm Team led by Japan, which is under the NASA-JAXA Joint Algorithm Team. The first version of GPM/DPR Level-2 Algorithm Theoretical Basis Document was completed on November 2010. The second version, "Baseline code", was completed in January 2012. Baseline code includes main module, and eight basic sub-modules (Preparation module, Vertical Profile module, Classification module, SRT module, DSD module, Solver module, Input module, and Output module.) The Level-2 algorithms will provide KuPR only products, KaPR only products, and Dual-frequency Precipitation products, with estimated precipitation rate, radar reflectivity, and precipitation information such as drop size distribution and bright band height. It is important to develop algorithm applicable to both TRMM/PR and KuPR in order to produce long-term continuous data set. Pre-launch code will be developed by autumn 2012. Global Rainfall Map algorithm has been developed by the Global Rainfall Map Algorithm Development Team in Japan. The algorithm succeeded heritages of the Global Satellite Mapping for Precipitation (GSMaP) project between 2002 and 2007, and near-real-time version operating at JAXA since 2007. "Baseline code" used current operational GSMaP code (V5.222,) and development completed in January 2012. Pre-launch code will be developed by autumn 2012, including update of database for rain type classification and rain/no-rain classification, and introduction of rain-gauge correction.

Development, Implementation, and Assessment of a Distance Module in Endocrine Physiology

ERIC Educational Resources Information Center

Rangel, Elaine Maria Leite; Mendes, Isabel Amelia Costa; Carnio, Evelin Capellari; Alves, Leila Maria Marchi; de Godoy, Simone; Crispim, Juliane de Almeida

2010-01-01

This study aimed to develop, implement, and assess a distance module in endocrine physiology in TelEduc for undergraduate nursing students from a public university in Brazil, with a sample size of 44 students. "Stage 1" consisted of the development of the module, through the process of creating a distance course by means of the Web.…

The Role of Research in Online Curriculum Development: The Case of "EarthLabs" Climate Change and Earth System Modules

ERIC Educational Resources Information Center

McNeal, Karen S.; Libarkin, Julie C.; Ledley, Tamara Shapiro; Bardar, Erin; Haddad, Nick; Elins, Kathy; Dutta, Saranee

2014-01-01

This study reports on an effort to illustrate the coupling of educational research with ongoing curriculum development to promote effective and evidence-based online learning. The research findings have been used to inform the "EarthLabs" curriculum development team as they revise existing modules and create new modules, in order to…

Human Development Student Modules.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

This set of 61 student learning modules deals with various topics pertaining to human development. The modules, which are designed for use in performance-based vocational education programs, each contain the following components: an introduction for the student, a performance objective, a variety of learning activities, content information, a…

Decoupled Modulation Control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Shaobu; Huang, Renke; Huang, Zhenyu

The objective of this research work is to develop decoupled modulation control methods for damping inter-area oscillations with low frequencies, so the damping control can be more effective and easier to design with less interference among different oscillation modes in the power system. A signal-decoupling algorithm was developed that can enable separation of multiple oscillation frequency contents and extraction of a “pure” oscillation frequency mode that are fed into Power System Stabilizers (PSSs) as the modulation input signals. As a result, instead of introducing interferences between different oscillation modes from the traditional approaches, the output of the new PSS modulationmore » control signal mainly affects only one oscillation mode of interest. The new decoupled modulation damping control algorithm has been successfully developed and tested on the standard IEEE 4-machine 2-area test system and a minniWECC system. The results are compared against traditional modulation controls, which demonstrates the validity and effectiveness of the newly-developed decoupled modulation damping control algorithm.« less

Guided Inquiry Facilitated Blended Learning to Improve Metacognitive and Learning Outcome of High School Students

NASA Astrophysics Data System (ADS)

Suwono, H.; Susanti, S.; Lestari, U.

2017-04-01

The learning activities that involve the students to learn actively is one of the characteristics of a qualified education. The learning strategy that involves students’ active learning is guided inquiry. Learning problems today are growing metacognitive skills and cognitive learning outcomes. It is the research and development of learning module by using 4D models of Thiagarajan. The first phase is Define, which analyses the problems and needs required by the prior preparation of the module. The second phase is Design, which formulates learning design and devices to obtain the initial draft of learning modules. The third stage is Develop, which is developing and writing module, module validation, product testing, revision, and the resulting an end-product results module development. The fourth stage is Disseminate, which is disseminating of the valid products. Modules were validated by education experts, practitioners, subject matter experts, and expert of online media. The results of the validation module indicated that the module was valid and could be used in teaching and learning. In the validation phase of testing methods, we used experiments to know the difference of metacognitive skills and learning outcomes between the control group and experimental group. The experimental design was a one group pretest-posttest design. The results of the data analysis showed that the modules could enhance metacognitive skills and learning outcomes. The advantages of this module is as follows, 1) module is accompanied by a video link on a website that contains practical activities that are appropriate to Curriculum 2013, 2) module is accompanied by a video link on a website that contains about manual laboratory activities that will be used in the classroom face-to-face, so that students are ready when doing laboratory activities, 3) this module can be online through chat to increase students’ understanding. The disadvantages of this module are the material presented in the modules is limited. It is suggested that for the better utilisation of the online activities, students should be present at every meeting of the activities, so as to make all the students participate actively. It is also suggested that school set up facilities to support blended learning.

Development of allosteric modulators of GPCRs for treatment of CNS disorders.

PubMed

Nickols, Hilary Highfield; Conn, P Jeffrey

2014-01-01

The discovery of allosteric modulators of G protein-coupled receptors (GPCRs) provides a promising new strategy with potential for developing novel treatments for a variety of central nervous system (CNS) disorders. Traditional drug discovery efforts targeting GPCRs have focused on developing ligands for orthosteric sites which bind endogenous ligands. Allosteric modulators target a site separate from the orthosteric site to modulate receptor function. These allosteric agents can either potentiate (positive allosteric modulator, PAM) or inhibit (negative allosteric modulator, NAM) the receptor response and often provide much greater subtype selectivity than orthosteric ligands for the same receptors. Experimental evidence has revealed more nuanced pharmacological modes of action of allosteric modulators, with some PAMs showing allosteric agonism in combination with positive allosteric modulation in response to endogenous ligand (ago-potentiators) as well as "bitopic" ligands that interact with both the allosteric and orthosteric sites. Drugs targeting the allosteric site allow for increased drug selectivity and potentially decreased adverse side effects. Promising evidence has demonstrated potential utility of a number of allosteric modulators of GPCRs in multiple CNS disorders, including neurodegenerative diseases such as Alzheimer's disease, Parkinson's disease, and Huntington's disease, as well as psychiatric or neurobehavioral diseases such as anxiety, schizophrenia, and addiction. © 2013.

Design and Analysis of Mirror Modules for IXO and Beyond

NASA Technical Reports Server (NTRS)

McClelland, Ryan S.; Powell, Cory; Saha, Timo T.; Zhang, William W.

2011-01-01

Advancements in X-ray astronomy demand thin, light, and closely packed thin optics which lend themselves to segmentation of the annular mirrors and, in turn, a modular approach to the mirror design. The functionality requirements of such a mirror module are well understood. A baseline modular concept for the proposed International X-Ray Observatory (IXO) Flight Mirror Assembly (FMA) consisting of 14,000 glass mirror segments divided into 60 modules was developed and extensively analyzed. Through this development, our understanding of module loads, mirror stress, thermal performance, and gravity distortion have greatly progressed. The latest progress in each of these areas is discussed herein. Gravity distortion during horizontal X-ray testing and on-orbit thermal performance have proved especially difficult design challenges. In light of these challenges, fundamental trades in modular X-ray mirror design have been performed. Future directions in module X-ray mirror design are explored including the development of a 1.8 m diameter FMA utilizing smaller mirror modules. The effect of module size on mirror stress, module self-weight distortion, thermal control, and range of segment sizes required is explored with advantages demonstrated from smaller module size in most cases.

Development of training modules for magnetic particle inspection

NASA Astrophysics Data System (ADS)

Kosaka, Daigo; Eisenmann, David J.; Enyart, Darrel; Nakagawa, Norio; Lo, Chester; Orman, David

2015-03-01

Magnetic particle inspection (MPI) is a nondestructive evaluation technique used with ferromagnetic materials. Although the application of this method may appear straightforward, MPI combines the complicated nature of electromagnetics, metallurgical material effects, fluid-particle motion dynamics, and physiological human factors into a single inspection. To fully appreciate industry specifications such as ASTM E-1444, users should develop a basic understanding of the many factors that are involved in MPI. We have developed a series of MPI training modules that are aimed at addressing this requirement. The modules not only offer qualitative explanations, but also show quantitative explanations in terms of measurement and numerical simulation data in many instances. There are five modules in all. Module ♯1 shows characteristics of waveforms and magnetizing methods. This allows MPI practitioners to make optimum choice of waveform and magnetizing method. Module ♯2 explains how material properties relate to the magnetic characteristics. Module ♯3 shows the strength of the excitation field or the flux leakage from a crack and how it compares to the detectability of a crack by MPI. Module ♯4 shows how specimen status may influence defect detection. Module ♯5 shows the effects of particle properties on defect detection.

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics Individualized Learning System. CANTRAC A-100-0010. Module Eleven: Capacitance. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on capacitance is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Seven lessons are included in the module:…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics Individualized Learning System. CANTRAC A-100-0010. Module Two: Voltage. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on voltage is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Six lessons are included in the module: (1)…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics Individualized Learning System. CANTRAC A-100-0010. Module Ten: Transformers. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on transformers is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Six lessons are included in the module:…

[MATCHE: Management Approach to Teaching Consumer and Homemaking Education.] Economically Depressed Areas Strand: Human Development: Module III-E-3: Resources for the Economically Depressed Family.

ERIC Educational Resources Information Center

Boogaert, John

This competency-based preservice home economics teacher education module on resources for the economically depressed area family is the third in a set of three modules on human development in economically depressed areas. (This set is part of a larger set of sixty-seven modules on the Management Approach to Teaching Consumer and Homemaking…

[MATCHE: Management Approach to Teaching Consumer and Homemaking Education.] Consumer Approach Strand: Human Development. Module I-E-4: Individuals and Families in Crisis.

ERIC Educational Resources Information Center

California State Univ., Fresno. Dept. of Home Economics.

This competency-based preservice home economics teacher education module on individuals and families in crisis is the fourth in a set of five modules on consumer education related to human development. (This set is part of a larger series of sixty-seven modules on the Management Approach to Teaching Consumer and Homemaking Education [MATCHE]--see…

KENNEDY SPACE CENTER, FLA. - Members of the STS-114 crew take a look at the Japanese Experiment Module (JEM) pressure module in the Space Station Processing Facility. A research laboratory, the pressurized module is the first element of the JEM, named "Kibo" (Hope), to be delivered to KSC. The National Space Development Agency of Japan (NASDA) developed the laboratory at the Tsukuba Space Center near Tokyo and is Japan's primary contribution to the Station. The JEM also includes an exposed facility (platform) for space environment experiments, a robotic manipulator system, and two logistics modules. The various JEM components will be assembled in space over the course of three Shuttle missions.

NASA Image and Video Library

2003-06-09

KENNEDY SPACE CENTER, FLA. - Members of the STS-114 crew take a look at the Japanese Experiment Module (JEM) pressure module in the Space Station Processing Facility. A research laboratory, the pressurized module is the first element of the JEM, named "Kibo" (Hope), to be delivered to KSC. The National Space Development Agency of Japan (NASDA) developed the laboratory at the Tsukuba Space Center near Tokyo and is Japan's primary contribution to the Station. The JEM also includes an exposed facility (platform) for space environment experiments, a robotic manipulator system, and two logistics modules. The various JEM components will be assembled in space over the course of three Shuttle missions.

The development and preliminary testing of a multimedia patient-provider survivorship communication module for breast cancer survivors.

PubMed

Wen, Kuang-Yi; Miller, Suzanne M; Stanton, Annette L; Fleisher, Linda; Morra, Marion E; Jorge, Alexandra; Diefenbach, Michael A; Ropka, Mary E; Marcus, Alfred C

2012-08-01

This paper describes the development of a theory-guided and evidence-based multimedia training module to facilitate breast cancer survivors' preparedness for effective communication with their health care providers after active treatment. The iterative developmental process used included: (1) theory and evidence-based content development and vetting; (2) user testing; (3) usability testing; and (4) participant module utilization. Formative evaluation of the training module prototype occurred through user testing (n = 12), resulting in modification of the content and layout. Usability testing (n = 10) was employed to improve module functionality. Preliminary web usage data (n = 256, mean age = 53, 94.5% White, 75% college graduate and above) showed that 59% of the participants accessed the communication module, for an average of 7 min per login. The iterative developmental process was informative in enhancing the relevance of the communication module. Preliminary web usage results demonstrate the potential feasibility of such a program. Our study demonstrates survivors' openness to the use of a web-based communication skills training module and outlines a systematic iterative user and interface program development and testing process, which can serve as a prototype for others considering such an approach. Copyright © 2012. Published by Elsevier Ireland Ltd.

The development and preliminary testing of a multimedia patient–provider survivorship communication module for breast cancer survivors

PubMed Central

Wen, Kuang-Yi; Miller, Suzanne M.; Stanton, Annette L.; Fleisher, Linda; Morra, Marion E.; Jorge, Alexandra; Diefenbach, Michael A.; Ropka, Mary E.; Marcus, Alfred C.

2012-01-01

Objective This paper describes the development of a theory-guided and evidence-based multimedia training module to facilitate breast cancer survivors’ preparedness for effective communication with their health care providers after active treatment. Methods The iterative developmental process used included: (1) theory and evidence-based content development and vetting; (2) user testing; (3) usability testing; and (4) participant module utilization. Results Formative evaluation of the training module prototype occurred through user testing (n = 12), resulting in modification of the content and layout. Usability testing (n = 10) was employed to improve module functionality. Preliminary web usage data (n = 256, mean age = 53, 94.5% White, 75% college graduate and above) showed that 59% of the participants accessed the communication module, for an average of 7 min per login. Conclusion The iterative developmental process was informative in enhancing the relevance of the communication module. Preliminary web usage results demonstrate the potential feasibility of such a program. Practice implications Our study demonstrates survivors’ openness to the use of a web-based communication skills training module and outlines a systematic iterative user and interface program development and testing process, which can serve as a prototype for others considering such an approach. PMID:22770812

US Coast Guard lightweight fire-fighting module

NASA Astrophysics Data System (ADS)

1980-05-01

The U.S. Coast Guard Fire-fighting Module developed for the purpose of fighting fires in harbors and on ships is described. The module can be lifted by a dockside crane or helicopter and placed on the deck of a patrol boat or cutter for transportation to the scene of the fire. At the fire the module can be set up and put in operation by a crew of two in approximately fifteen minutes. Once in operation the module will deliver water to two fire nozzles at a pressure of 150 psi and a flow rate of 2000 gpm. Sufficient fuel is carried in the module for three hours of continuous operation. A record of the development of the fire fighting module is also presented.

US Coast Guard lightweight fire-fighting module

NASA Technical Reports Server (NTRS)

1980-01-01

The U.S. Coast Guard Fire-fighting Module developed for the purpose of fighting fires in harbors and on ships is described. The module can be lifted by a dockside crane or helicopter and placed on the deck of a patrol boat or cutter for transportation to the scene of the fire. At the fire the module can be set up and put in operation by a crew of two in approximately fifteen minutes. Once in operation the module will deliver water to two fire nozzles at a pressure of 150 psi and a flow rate of 2000 gpm. Sufficient fuel is carried in the module for three hours of continuous operation. A record of the development of the fire fighting module is also presented.

Tuned grid generation with ICEM CFD

NASA Technical Reports Server (NTRS)

Wulf, Armin; Akdag, Vedat

1995-01-01

ICEM CFD is a CAD based grid generation package that supports multiblock structured, unstructured tetrahedral and unstructured hexahedral grids. Major development efforts have been spent to extend ICEM CFD's multiblock structured and hexahedral unstructured grid generation capabilities. The modules added are: a parametric grid generation module and a semi-automatic hexahedral grid generation module. A fully automatic version of the hexahedral grid generation module for around a set of predefined objects in rectilinear enclosures has been developed. These modules will be presented and the procedures used will be described, and examples will be discussed.

An improved classification tree analysis of high cost modules based upon an axiomatic definition of complexity

NASA Technical Reports Server (NTRS)

Tian, Jianhui; Porter, Adam; Zelkowitz, Marvin V.

1992-01-01

Identification of high cost modules has been viewed as one mechanism to improve overall system reliability, since such modules tend to produce more than their share of problems. A decision tree model was used to identify such modules. In this current paper, a previously developed axiomatic model of program complexity is merged with the previously developed decision tree process for an improvement in the ability to identify such modules. This improvement was tested using data from the NASA Software Engineering Laboratory.

Advanced modulation technology development for earth station demodulator applications

NASA Technical Reports Server (NTRS)

Davis, R. C.; Wernlund, J. V.; Gann, J. A.; Roesch, J. F.; Wright, T.; Crowley, R. D.

1989-01-01

The purpose of this contract was to develop a high rate (200 Mbps), bandwidth efficient, modulation format using low cost hardware, in 1990's technology. The modulation format chosen is 16-ary continuous phase frequency shift keying (CPFSK). The implementation of the modulation format uses a unique combination of a limiter/discriminator followed by an accumulator to determine transmitted phase. An important feature of the modulation scheme is the way coding is applied to efficiently gain back the performance lost by the close spacing of the phase points.

Microgravity

NASA Image and Video Library

2001-06-05

This computer-generated image depicts the Materials Science Research Rack-1 (MSRR-1) being developed by NASA's Marshall Space Flight Center and the European Space Agency (ESA) for placement in the Destiny laboratory module aboard the International Space Station. The rack is part of the plarned Materials Science Research Facility (MSRF) and is expected to include two furnace module inserts, a Quench Module Insert (being developed by NASA's Marshall Space Flight Center) to study directional solidification in rapidly cooled alloys and a Diffusion Module Insert (being developed by the European Space Agency) to study crystal growth, and a transparent furnace (being developed by NASA's Space Product Development program). Multi-user equipment in the rack is being developed under the auspices of NASA's Office of Biological and Physical Research (OBPR) and ESA. Key elements are labeled in other images (0101754, 0101830, and TBD).

Microgravity

NASA Image and Video Library

2001-06-05

This computer-generated image depicts the Materials Science Research Rack-1 (MSRR-1) being developed by NASA's Marshall Space Flight Center and the European Space Agency (ESA) for placement in the Destiny laboratory module aboard the International Space Station. The rack is part of the plarned Materials Science Research Facility (MSRF) and is expected to include two furnace module inserts, a Quench Module Insert (being developed by NASA's Marshall Space Flight Center) to study directional solidification in rapidly cooled alloys and a Diffusion Module Insert (being developed by the European Space Agency) to study crystal growth, and a transparent furnace (being developed by NASA's Space Product Development program). Multi-user equipment in the rack is being developed under the auspices of NASA's Office of Biological and Physical Research (OBPR) and ESA. Key elements are labeled in other images (0101754, 0101829, 0101830).

Microgravity

NASA Image and Video Library

2001-06-05

This computer-generated image depicts the Materials Science Research Rack-1 (MSRR-1) being developed by NASA's Marshall Space Flight Center and the European Space Agency (ESA) for placement in the Destiny laboratory module aboard the International Space Station. The rack is part of the plarned Materials Science Research Facility (MSRF) and is expected to include two furnace module inserts, a Quench Module Insert (being developed by NASA's Marshall Space Flight Center) to study directional solidification in rapidly cooled alloys and a Diffusion Module Insert (being developed by the European Space Agency) to study crystal growth, and a transparent furnace (being developed by NASA's Space Product Development program). Multi-user equipment in the rack is being developed under the auspices of NASA's Office of Biological and Physical Research (OBPR) and ESA. A larger image is available without labels (No. 0101755).

Microgravity

NASA Image and Video Library

2001-06-05

This scale model depicts the Materials Science Research Rack-1 (MSRR-1) being developed by NASA's Marshall Space Flight Center and the European Space Agency (ESA) for placement in the Destiny laboratory module aboard the International Space Station. The rack is part of the plarned Materials Science Research Facility (MSRF) and is expected to include two furnace module inserts, a Quench Module Insert (being developed by NASA's Marshall Space Flight Center) to study directional solidification in rapidly cooled alloys and a Diffusion Module Insert (being developed by the European Space Agency) to study crystal growth, and a transparent furnace (being developed by NASA's Space Product Development program). Multi-user equipment in the rack is being developed under the auspices of NASA's Office of Biological and Physical Research (OBPR) and ESA. Key elements are labeled in other images (0101754, 0101829, 0101830, and TBD).

Development of High Efficiency (14%) Solar Cell Array Module

NASA Technical Reports Server (NTRS)

Iles, P. A.; Khemthong, S.; Olah, S.; Sampson, W. J.; Ling, K. S.

1979-01-01

High efficiency solar cells required for the low cost modules was developed. The production tooling for the manufacture of the cells and modules was designed. The tooling consisted of: (1) back contact soldering machine; (2) vacuum pickup; (3) antireflective coating tooling; and (4) test fixture.

Development of a three-dimensional core dynamics analysis program for commercial boiling water reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bessho, Yasunori; Yokomizo, Osamu; Yoshimoto, Yuichiro

1997-03-01

Development and qualification results are described for a three-dimensional, time-domain core dynamics analysis program for commercial boiling water reactors (BWRs). The program allows analysis of the reactor core with a detailed mesh division, which eliminates calculational ambiguity in the nuclear-thermal-hydraulic stability analysis caused by reactor core regional division. During development, emphasis was placed on high calculational speed and large memory size as attained by the latest supercomputer technology. The program consists of six major modules, namely a core neutronics module, a fuel heat conduction/transfer module, a fuel channel thermal-hydraulic module, an upper plenum/separator module, a feedwater/recirculation flow module, and amore » control system module. Its core neutronics module is based on the modified one-group neutron kinetics equation with the prompt jump approximation and with six delayed neutron precursor groups. The module is used to analyze one fuel bundle of the reactor core with one mesh (region). The fuel heat conduction/transfer module solves the one-dimensional heat conduction equation in the radial direction with ten nodes in the fuel pin. The fuel channel thermal-hydraulic module is based on separated three-equation, two-phase flow equations with the drift flux correlation, and it analyzes one fuel bundle of the reactor core with one channel to evaluate flow redistribution between channels precisely. Thermal margin is evaluated by using the GEXL correlation, for example, in the module.« less

Achieving Success in Small Business. A Self-Instruction Program for Small Business Owner-Managers. Developing Your Sales Promotion Plan.

ERIC Educational Resources Information Center

Virginia Polytechnic Inst. and State Univ., Blacksburg. Div. of Vocational-Technical Education.

This self-instructional module on developing your sales promotion plan is the fifth in a set of twelve modules designed for small business owner-managers. Competencies for this module are (1) describe the role of advertising, display, and personal selling in a sales promotion plan and (2) develop an effective sales promotion plan which…

High-Power, High-Speed Electro-Optic Pockels Cell Modulator

NASA Technical Reports Server (NTRS)

Hawthorne, Justin; Battle, Philip

2013-01-01

Electro-optic modulators rely on a change in the index of refraction for the optical wave as a function of an applied voltage. The corresponding change in index acts to delay the wavefront in the waveguide. The goal of this work was to develop a high-speed, high-power waveguide- based modulator (phase and amplitude) and investigate its use as a pulse slicer. The key innovation in this effort is the use of potassium titanyl phosphate (KTP) waveguides, making the highpower, polarization-based waveguide amplitude modulator possible. Furthermore, because it is fabricated in KTP, the waveguide component will withstand high optical power and have a significantly higher RF modulation figure of merit (FOM) relative to lithium niobate. KTP waveguides support high-power TE and TM modes - a necessary requirement for polarization-based modulation as with a Pockels cell. High-power fiber laser development has greatly outpaced fiber-based modulators in terms of its maturity and specifications. The demand for high-performance nonlinear optical (NLO) devices in terms of power handling, efficiency, bandwidth, and useful wavelength range has driven the development of bulk NLO options, which are limited in their bandwidth, as well as waveguide based LN modulators, which are limited by their low optical damage threshold. Today, commercially available lithium niobate (LN) modulators are used for laser formatting; however, because of photorefractive damage that can reduce transmission and increase requirements on bias control, LN modulators cannot be used with powers over several mW, dependent on wavelength. The high-power, high-speed modulators proposed for development under this effort will enable advancements in several exciting fields including lidarbased remote sensing, atomic interferometry, free-space laser communications, and others.

[Development and application of emergency medical information management system].

PubMed

Wang, Fang; Zhu, Baofeng; Chen, Jianrong; Wang, Jian; Gu, Chaoli; Liu, Buyun

2011-03-01

To meet the needs of clinical practice of rescuing critical illness and develop the information management system of the emergency medicine. Microsoft Visual FoxPro, which is one of Microsoft's visual programming tool, is used to develop computer-aided system included the information management system of the emergency medicine. The system mainly consists of the module of statistic analysis, the module of quality control of emergency rescue, the module of flow path of emergency rescue, the module of nursing care in emergency rescue, and the module of rescue training. It can realize the system management of emergency medicine and,process and analyze the emergency statistical data. This system is practical. It can optimize emergency clinical pathway, and meet the needs of clinical rescue.

Wnt signal transduction pathways: modules, development and evolution.

PubMed

Nayak, Losiana; Bhattacharyya, Nitai P; De, Rajat K

2016-08-01

Wnt signal transduction pathway (Wnt STP) is a crucial intracellular pathway mainly due to its participation in important biological processes, functions, and diseases, i.e., embryonic development, stem-cell management, and human cancers among others. This is why Wnt STP is one of the highest researched signal transduction pathways. Study and analysis of its origin, expansion and gradual development to the present state as found in humans is one aspect of Wnt research. The pattern of development and evolution of the Wnt STP among various species is not clear till date. A phylogenetic tree created from Wnt STPs of multiple species may address this issue. In this respect, we construct a phylogenetic tree from modules of Wnt STPs of diverse species. We term it as the 'Module Tree'. A module is nothing but a self-sufficient minimally-dependent subset of the original Wnt STP. Authenticity of the module tree is tested by comparing it with the two reference trees. The module tree performs better than an alternative phylogenetic tree constructed from pathway topology of Wnt STPs. Moreover, an evolutionary emergence pattern of the Wnt gene family is created and the module tree is tallied with it to showcase the significant resemblances.

Supplemental Driver Safety Program Development Volume II--Pilot and Field Test Module Materials. Final Report.

ERIC Educational Resources Information Center

McPherson, Kenard; Weidman, James R.

This volume contains materials to supplement existing driver education programming offered by high schools to youthful (16- to 18-year old) drivers. Section I contains three drinking/driving modules: an information-only module, a self-image module, and a three-unit peer intervention module. An instructor's guide provided for each module includes…

Pulse generator with intermediate inductive storage as a lightning simulator

NASA Astrophysics Data System (ADS)

Kovalchuk, B. M.; Kharlov, A. V.; Zherlytsyn, A. A.; Kumpyak, E. V.; Tsoy, N. V.

2016-06-01

Compact transportable generators are required for simulating a lightning current pulse for electrical apparatus testing. A bi-exponential current pulse has to be formed by such a generator (with a current rise time of about two orders of magnitude faster than the damping time). The objective of this study was to develop and investigate a compact pulse generator with intermediate inductive storage and a fuse opening switch as a simulator of lightning discharge. A Marx generator (six stages) with a capacitance of 1 μF and an output voltage of 240 kV was employed as primary storage. In each of the stages, two IK-50/3 (50 kV, 3 μF) capacitors are connected in parallel. The generator inductance is 2 μH. A test bed for the investigations was assembled with this generator. The generator operates without SF6 and without oil in atmospheric air, which is very important in practice. Straight copper wires with adjustable lengths and diameters were used for the electro-explosive opening switch. Tests were made with active-inductive loads (up to 0.1 Ω and up to 6.3 μH). The current rise time is lower than 1200 ns, and the damping time can be varied from 35 to 125 μs, following the definition of standard lightning current pulse in the IEC standard. Moreover, 1D MHD calculations of the fuse explosion were carried out self-consistently with the electric circuit equations, in order to calculate more accurately the load pulse parameters. The calculations agree fairly well with the tests. On the basis of the obtained results, the design of a transportable generator was developed for a lightning simulator with current of 50 kA and a pulse shape corresponding to the IEEE standard.

Healthcare under siege: Geopolitics of medical service provision in the Gaza Strip.

PubMed

Smith, Ron J

2015-12-01

Siege, a process of political domination aimed at isolating an entire population, represents a unique threat to healthcare provision. This study is a qualitative examination of the impacts of siege on the practices and systems that underlie health in Gaza. Data are from participant observation conducted over a period of six years (2009-2014), along over 20 interviews with doctors and health administrators in the Non-Governmental Organisation (NGO), Governmental, and United Nations sectors. Analyses were informed by two connected theories. First, the theory of surplus population was used, an idea that builds on Marx's conception of primitive accumulation and Harvey's accumulation by dispossession. Second, Roy's theory of de-development was used, particularly as it is connected to neoliberal trends in healthcare systems organizing and financing. Findings indicate that siege impinges on effective healthcare provision through two central, intertwined processes: withholding materials and resources and undermining healthcare at a systems level. These strains pose considerable threats to healthcare, particularly within the Ministry of Health but also within and among other entities in Gaza that deliver care. The strategies of de-development described by participants reflect the ways the population that is codified as a surplus population. Gazan society is continually divested of any of the underpinnings necessary for a well-functioning sovereign health care infrastructure. Instead of a self-governing, independent system, this analysis of health care structures in Gaza reveals a system that is continually at risk of being comprised entirely of captive consumers who are entirely dependent on Israel, international bodies, and the aid industry for goods and services. This study points to the importance of foregrounding the geopolitical context for analysis of medical service delivery within conflict settings. Findings also highlight the importance of advocating for sovereignty and self-determination as related to health systems.

Development of Hybrid Courses Utilizing Modules as an Objective in ATE Projects

ERIC Educational Resources Information Center

Payne, James E.; Murphy, Richard M.; Payne, Linda L.

2017-01-01

Orangeburg-Calhoun Technical College (OCtech) has been awarded two National Science Foundation Advanced Technological Education (NSF-ATE) grants since 2011 that have the development of module-based hybrid courses in Engineering Technology and Mechatronics as objectives. In this article, the advantages and challenges associated with module-based…

Research Report for the Organizing for Diversity Project.

ERIC Educational Resources Information Center

Betsinger, Alicia M.; Garcia, Shernaz B.; Guerra, Patricia L.

This report describes the Organizing for Diversity Project, which generated professional development modules to prepare teachers to work more effectively with diverse students. Prototype modules were developed in collaboration with teacher volunteers, then field tested. The final 11 modules, which included 33 hours of training, were designed for…

Instructor's Guide for Human Development Student Modules.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

This instructor's guide is designed for use with an accompanying set of 61 student learning modules on human development. Included among the topics covered in the individual modules are the following: consumer and homemaking education (health and nutrition, personal appearance and grooming, puberty, menstruation, the human reproductive system,…

Module for phosphorus separation and recycling from liquid manures

USDA-ARS?s Scientific Manuscript database

A method has been developed to extract and concentrate soluble phosphates from livestock wastewater. The research was conducted over a 10-year period and went from initial bench studies and discovery, to pilot module development, to full-scale demonstrations of the phosphorus (P) module in swine fa...

DATA COLLECTION MANAGER MODULE OF REGION III'S MULTI-CRITERIA INTEGRATED RESOURCE ASSESSMENT (MIRA) ENVIRONMENTAL DECISION MAKING APPROACH

EPA Science Inventory

This proposal pertains to the on-going development of the Data Collection Manager (DCM) module, which is one of three modules that compose MIRA, Multi-criteria Integrated Resource Assessment. MIRA is Region III's newly conceived and continually developing decision support approac...

V-band integrated quadriphase modulator

NASA Technical Reports Server (NTRS)

Grote, A.; Chang, K.

1983-01-01

A V-band integrated circuit quadriphase shift keyed modulator/exciter for space communications systems was developed. Intersatellite communications systems require direct modulation at 60 GHz to enhance signal processing capability. For most systems, particularly space applications, small and lightweight components are essential to alleviate severe system design constraints. Thus to achieve wideband, high data rate systems, direct modulation techniques at millimeter waves using solid state integrated circuit technology are an integral part of the overall technology developments.

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 20: Solid State Power Supplies; 20T: Electron Tube Power Supplies. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This set of individualized learning modules on power supplies is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Two modules are included in the…

[Virtual educational proposal in cardiopulmonary resuscitation for the neonate care].

PubMed

Gonçalves, Gilciane Ribeiro; Peres, Heloisa Helena Ciqueto; Rodrigues, Rita de Cássia; Tronchin, Daisy Maria Rizatto; Pereira, Irene Mari

2010-06-01

The purpose of this study was to develop an educational proposal using virtual multimedia resources, to innovate, stimulate and diversify areas of communication and interaction, facilitating nurses' autonomous and reflexive process of teaching and learning. This is an applied research, following the cyclical and interactive phases of designing, planning, developing and implementing. The educational proposal was developed on the TelEduc platform, using specific tools for content organization and communication between students and administrator. The teaching modules were on the following themes: Module 1--Fundamentals of the heart anatomy and physiology in newborns; Module 2--Risk factors for the occurrence of cardiorespiratory arrest in newborns; Module 3--Planning nursing care; Module 4--Medications used in cardiopulmonary arrests in newborns; and Module 5--Cardiorespiratory arrest care in newborns. This study may contribute to innovating teaching in nursing from a virtual educational proposal on the important issue of newborn cardiopulmonary resuscitation care.

RSRM top hat cover simulator lightning test, volume 1

NASA Technical Reports Server (NTRS)

1990-01-01

The test sequence was to measure electric and magnetic fields induced inside a redesigned solid rocket motor case when a simulated lightning discharge strikes an exposed top hat cover simulator. The test sequence was conducted between 21 June and 17 July 1990. Thirty-six high rate-of-rise Marx generator discharges and eight high current bank discharges were injected onto three different test article configurations. Attach points included three locations on the top hat cover simulator and two locations on the mounting bolts. Top hat cover simulator and mounting bolt damage and grain cover damage was observed. Overall electric field levels were well below 30 kilowatts/meter. Electric field levels ranged from 184.7 to 345.9 volts/meter and magnetic field levels were calculated from 6.921 to 39.73 amperes/meter. It is recommended that the redesigned solid rocket motor top hat cover be used in Configuration 1 or Configuration 2 as an interim lightning protection device until a lightweight cover can be designed.

Repetitive compact flash x-ray generators for soft radiography

NASA Astrophysics Data System (ADS)

Sato, Eiichi; Shikoda, Arimitsu; Kimura, Shingo; Sagae, Michiaki; Oizumi, Teiji; Takahashi, Kei; Hayasi, Yasuomi; Shoji, Tetsuo; Shishido, Koro; Tamakawa, Yoshiharu; Yanagisawa, Toru

1993-01-01

The construction and the fundamental studies for the repetitive flash x-ray generators designed by Japan Impulse Laboratory in Iwate Medical University are described. These generators are classified to the following two major types: (1) generators having diodes, and (2) generators having triodes. In order to generate high-voltage impulses, we employed the following transmission lines (pulsers): (a) high-voltage-inversion type with a maximum output voltage Vom of about 80 kV, (b) high-voltage- inversion type having a coaxial cable (Vom equals 130 kV), (c) two-stage Marx pulser (Vom equals 150 kV), (d) two-cable-type Blumlein (Vom equals 120 kV), (e) modified Blumlein (Vom equals 120 kV), (f) fundamental transmission line for triode (Vom equals 100 kV), and (g) transmission line for an enclosed triode (Vom equals 100 kV). Using these generators we succeeded in performing high-speed radiography as follows: (a) delayed radiography; (b) multiple-shot radiography; and (c) cineradiography.

First a tragedy, then farce

NASA Astrophysics Data System (ADS)

Foster, Brian

2008-09-01

It is impossible to think about the problems in the UK over the last 10 months arising from the £80m shortfall in the budget of the Science and Technology Facilities Council (STFC) without recalling Marx's famous aphorism: "History repeats itself, first as tragedy, then as farce." Certainly the repetition of a funding crisis in UK particle physics and astronomy is hardly unexpected; they seem to occur every decade or so with unwelcome regularity. The consequent loss of morale, jobs and opportunities in the UK for the brightest young people to pursue their dreams in what is widely acknowledged to be world-class science is a tragedy. What perhaps marks the uniqueness of the funding crisis this time round is the level of farce. The sums that did not add up; the consultations without interlocutors; and the truculent and damaging statements about withdrawal from the Gemini telescopes based in Hawaii and Chile, and the International Linear Collider (ILC) - the next big particle-physics project after the Large Hadron Collider (LHC) at CERN.

The impact of past and present preferences on stimulus engagement in nursing home residents with dementia.

PubMed

Cohen-Mansfield, Jiska; Marx, Marcia S; Thein, Khin; Dakheel-Ali, Maha

2010-01-01

We examined engagement with stimuli in 193 nursing home residents with dementia. We hypothesized that activities and stimuli based on a person's past and current preferences would result in more engagement than other activities/stimuli. The expanded version of the self-identity questionnaire [Cohen-Mansfield, J., Golander, H. & Arheim, G. (2000)] was used to determine participants' past/present interests (as reported by relatives) in the following areas: art, music, babies, pets, reading, television, and office work. We utilized the observational measurement of engagement (Cohen-Mansfield, J., Dakheel-Ali, M., & Marx, M.S. (2009). Analysis revealed that residents with current interests in music, art, and pets were more engaged by stimuli that reflect these interests than residents without these interests. Our findings demonstrate the utility of determining a person's preferences for stimuli in order to predict responsiveness. Lack of prediction for some stimuli may reflect differences between past preferences and activities that are feasible in the present.

[Constant fluoridation of drinking water and the incidence of dental caries in children and juveniles (author's transl)].

PubMed

Künzel, W

1980-01-01

The regular examination of 20,000 children and juveniles aged 6 to 15 (permanent teeth) and some 12.500 three- to eight-year-olds (deciduous teeth) has shown that the incidence of dental caries (DMF/T and df/t indices) is directly dependent upon the constant fluoridation of drinking water (1.0 +/- 0.1 ppm F). The reduction in dental caries observed on both deciduous and permanent teeth as a result of twelve years of fluoridation of drinking water, which was started in Karl-Marx-Stadt in 1959, was followed, because of the necessity to temporarily discontinue the addition of fluorine salts to the drinking water, by a slight increase in caries which could be checked through refluorination. After eighteen years of fluoridation of drinking water, the situation can again be considered to be in equilibrium. The need for proper fluoridation and regular control thereof through analyzing the fluorine content of drinking water is pointed out.

Design and development of data acquisition system based on WeChat hardware

NASA Astrophysics Data System (ADS)

Wang, Zhitao; Ding, Lei

2018-06-01

Data acquisition system based on WeChat hardware provides methods for popularization and practicality of data acquisition. The whole system is based on WeChat hardware platform, where the hardware part is developed on DA14580 development board and the software part is based on Alibaba Cloud. We designed service module, logic processing module, data processing module and database module. The communication between hardware and software uses AirSync Protocal. We tested this system by collecting temperature and humidity data, and the result shows that the system can aquisite the temperature and humidity in real time according to settings.

Miniature Packaging Concept for LNAs in the 200-300 GHz Range

NASA Technical Reports Server (NTRS)

Samoska, Lorene; Fung, Andy; Varonen, Mikko; Lin, Robert; Peralta, Alejandro; Soria, Mary; Lee, Choonsup; Padmanabhan, Sharmila; Sarkozy, Stephen; Lai, Richard

2016-01-01

In this work, we describe new miniaturized low noise amplifier modules which we developed for incorporation in small-scale satellites or Cubesats, and which exhibit similar or better performance compared to previously reported LNAs in the literature. We have targeted the WR4 (170-260 GHz) and WR3 (220-325 GHz) waveguide bands for the module development. The modules include two different methods of E-plane probes which have been developed for low loss, and stability at high frequencies. MMIC LNAs were also developed for these frequency ranges and fabricated in Northrop Grumman Corporation's 35 nm InP HEMT technology, and we have experimentally verified that noise performance is lower than reported in prior work. The best results include a miniature LNA module with 550K noise at 224 GHz, and a wideband LNA module with 15 dB gain from 230-280 GHz.

Developing workshop module of realistic mathematics education: Follow-up workshop

NASA Astrophysics Data System (ADS)

Palupi, E. L. W.; Khabibah, S.

2018-01-01

Realistic Mathematics Education (RME) is a learning approach which fits the aim of the curriculum. The success of RME in teaching mathematics concepts, triggering students’ interest in mathematics and teaching high order thinking skills to the students will make teachers start to learn RME. Hence, RME workshop is often offered and done. This study applied development model proposed by Plomp. Based on the study by RME team, there are three kinds of RME workshop: start-up workshop, follow-up workshop, and quality boost. However, there is no standardized or validated module which is used in that workshops. This study aims to develop a module of RME follow-up workshop which is valid and can be used. Plopm’s developmental model includes materials analysis, design, realization, implementation, and evaluation. Based on the validation, the developed module is valid. While field test shows that the module can be used effectively.

Dynamics of the Venera 13 and 14 descent modules in the parachute segment of descent

NASA Astrophysics Data System (ADS)

Vishniak, A. A.; Kariagin, V. P.; Kovtunenko, V. M.; Kotov, B. B.; Kuznetsov, V. V.; Lopatkin, A. I.; Perov, O. V.; Pichkhadze, K. M.; Rysev, O. V.

1983-05-01

The parachute system for the Venera 13 and 14 descent modules was designed to assure the prescribed duration of descent in the Venus cloud layer as well as the separation of heat-shield elements from the module. A mathematical model is developed which makes possible a numerical analysis of the dynamics of the module-parachute system with allowance for parachute inertia, atmospheric turbulence, the means by which the parachute is attachead to the module, and the elasticity and damping of the suspended system. A formula is derived for determining the period of oscillations of the module in the parachute segment of descent. A comparison of theoretical and experimental results shows that this formula can be used in the design calculations, especially at the early stage of module development.

A new approach to telemetry data processing. Ph.D. Thesis - Maryland Univ.

NASA Technical Reports Server (NTRS)

Broglio, C. J.

1973-01-01

An approach for a preprocessing system for telemetry data processing was developed. The philosophy of the approach is the development of a preprocessing system to interface with the main processor and relieve it of the burden of stripping information from a telemetry data stream. To accomplish this task, a telemetry preprocessing language was developed. Also, a hardware device for implementing the operation of this language was designed using a cellular logic module concept. In the development of the hardware device and the cellular logic module, a distributed form of control was implemented. This is accomplished by a technique of one-to-one intermodule communications and a set of privileged communication operations. By transferring this control state from module to module, the control function is dispersed through the system. A compiler for translating the preprocessing language statements into an operations table for the hardware device was also developed. Finally, to complete the system design and verify it, a simulator for the collular logic module was written using the APL/360 system.

SPECIAL ISSUE ON OPTICAL PROCESSING OF INFORMATION: Characteristics of surface-plasmon liquid-crystal light modulators operating under phase modulation conditions

NASA Astrophysics Data System (ADS)

Nazvanov, V. F.; Afonin, O. A.; Grebennikov, A. I.

1995-10-01

Electrically and optically controlled liquid-crystal light modulators based on surface plasmons were developed and investigated in an ellipsometric optical system. The characteristics of these modulators were determined and compared under phase and amplitude modulation conditions.

MUMPS Based Integration of Disparate Computer-Assisted Medical Diagnosis Modules

DTIC Science & Technology

1989-12-12

modules use a Bayesian approach, while the Opthalmology module uses a Rule Based approach. In the current effort, MUMPS is used to develop an...Abdominal and Chest Pain modules use a Bayesian approach, while the Opthalmology module uses a Rule Based approach. In the current effort, MUMPS is used

Materials Science Research Rack-1 (MSRR-1)

NASA Technical Reports Server (NTRS)

2001-01-01

This computer-generated image depicts the Materials Science Research Rack-1 (MSRR-1) being developed by NASA's Marshall Space Flight Center and the European Space Agency (ESA) for placement in the Destiny laboratory module aboard the International Space Station. The rack is part of the plarned Materials Science Research Facility (MSRF) and is expected to include two furnace module inserts, a Quench Module Insert (being developed by NASA's Marshall Space Flight Center) to study directional solidification in rapidly cooled alloys and a Diffusion Module Insert (being developed by the European Space Agency) to study crystal growth, and a transparent furnace (being developed by NASA's Space Product Development program). Multi-user equipment in the rack is being developed under the auspices of NASA's Office of Biological and Physical Research (OBPR) and ESA. Key elements are labeled in other images (0101754, 0101829, 0101830, and TBD).

Materials Science Research Rack-1 (MSRR-1)

NASA Technical Reports Server (NTRS)

2001-01-01

This computer-generated image depicts the Materials Science Research Rack-1 (MSRR-1) being developed by NASA's Marshall Space Flight Center and the European Space Agency (ESA) for placement in the Destiny laboratory module aboard the International Space Station. The rack is part of the plarned Materials Science Research Facility (MSRF) and is expected to include two furnace module inserts, a Quench Module Insert (being developed by NASA's Marshall Space Flight Center) to study directional solidification in rapidly cooled alloys and a Diffusion Module Insert (being developed by the European Space Agency) to study crystal growth, and a transparent furnace (being developed by NASA's Space Product Development program). Multi-user equipment in the rack is being developed under the auspices of NASA's Office of Biological and Physical Research (OBPR) and ESA. A larger image is available without labels (No. 0101755).

Materials Science Research Rack-1 (MSRR-1)

NASA Technical Reports Server (NTRS)

2001-01-01

This computer-generated image depicts the Materials Science Research Rack-1 (MSRR-1) being developed by NASA's Marshall Space Flight Center and the European Space Agency (ESA) for placement in the Destiny laboratory module aboard the International Space Station. The rack is part of the plarned Materials Science Research Facility (MSRF) and is expected to include two furnace module inserts, a Quench Module Insert (being developed by NASA's Marshall Space Flight Center) to study directional solidification in rapidly cooled alloys and a Diffusion Module Insert (being developed by the European Space Agency) to study crystal growth, and a transparent furnace (being developed by NASA's Space Product Development program). Multi-user equipment in the rack is being developed under the auspices of NASA's Office of Biological and Physical Research (OBPR) and ESA. Key elements are labeled in other images (0101754, 0101830, and TBD).

Materials Science Research Rack-1 (MSRR-1)

NASA Technical Reports Server (NTRS)

2001-01-01

This scale model depicts the Materials Science Research Rack-1 (MSRR-1) being developed by NASA's Marshall Space Flight Center and the European Space Agency (ESA) for placement in the Destiny laboratory module aboard the International Space Station. The rack is part of the plarned Materials Science Research Facility (MSRF) and is expected to include two furnace module inserts, a Quench Module Insert (being developed by NASA's Marshall Space Flight Center) to study directional solidification in rapidly cooled alloys and a Diffusion Module Insert (being developed by the European Space Agency) to study crystal growth, and a transparent furnace (being developed by NASA's Space Product Development program). Multi-user equipment in the rack is being developed under the auspices of NASA's Office of Biological and Physical Research (OBPR) and ESA. Key elements are labeled in other images (0101754, 0101829, 0101830, and TBD).

Materials Science Research Rack-1 (MSRR-1)

NASA Technical Reports Server (NTRS)

2001-01-01

This computer-generated image depicts the Materials Science Research Rack-1 (MSRR-1) being developed by NASA's Marshall Space Flight Center and the European Space Agency (ESA) for placement in the Destiny laboratory module aboard the International Space Station. The rack is part of the plarned Materials Science Research Facility (MSRF) and is expected to include two furnace module inserts, a Quench Module Insert (being developed by NASA's Marshall Space Flight Center) to study directional solidification in rapidly cooled alloys and a Diffusion Module Insert (being developed by the European Space Agency) to study crystal growth, and a transparent furnace (being developed by NASA's Space Product Development program). Multi-user equipment in the rack is being developed under the auspices of NASA's Office of Biological and Physical Research (OBPR) and ESA. Key elements are labeled in other images (0101754, 0101829, 0101830).

Microgravity

NASA Image and Video Library

2001-06-05

This scale model depicts the Materials Science Research Rack-1 (MSRR-1) being developed by NASA's Marshall Space Flight Center and the European Space Agency (ESA) for placement in the Destiny laboratory module aboard the International Space Station. The rack is part of the plarned Materials Science Research Facility (MSRF) and is expected to include two furnace module inserts, a Quench Module Insert (being developed by NASA's Marshall Space Flight Center) to study directional solidification in rapidly cooled alloys and a Diffusion Module Insert (being developed by the European Space Agency) to study crystal growth, and a transparent furnace (being developed by NASA's Space Product Development program). Multi-user equipment in the rack is being developed under the auspices of NASA's Office of Biological and Physical Research (OBPR) and ESA. Here the transparent furnace is extracted for servicing. Key elements are labeled in other images (0101754, 0101829, 0101830, and TBD).

Development of Mole Concept Module Based on Structured Inquiry with Interconection of Macro, Submicro, and Symbolic Representation for Grade X of Senior High School

NASA Astrophysics Data System (ADS)

Sagita, R.; Azra, F.; Azhar, M.

2018-04-01

The research has created the module of mole concept based on structured inquiry with interconection of macro, submicro, and symbolic representation and determined the validity and practicality of the module. The research type was Research and Development (R&D). The development model was 4-D models that consist of four steps: define, design, develop, and disseminate. The research was limited on develop step. The instrument of the research was questionnaire form that consist of validity and practicality sheets. The module was validated by 5 validators. Practicality module was tested by 2 chemistry teachers and 28 students of grade XI MIA 5 at SMAN 4 of Padang. Validity and practicality data were analysed by using the kappa Cohen formula. The moment kappa average of 5 validators was 0,95 with highest validity category. The moment kappa average of teachers and students were 0,89 and 0,91 praticality with high category. The result of the research showed that the module of mole concept based on structured inquiry with interconection of macro, submicro, and symbolic representation was valid and practice to be used on the learning chemistry.

Development and pilot testing of an online module for ethics education based on the Nigerian National Code for Health Research Ethics

PubMed Central

2013-01-01

Background The formulation and implementation of national ethical regulations to protect research participants is fundamental to ethical conduct of research. Ethics education and capacity are inadequate in developing African countries. This study was designed to develop a module for online training in research ethics based on the Nigerian National Code of Health Research Ethics and assess its ease of use and reliability among biomedical researchers in Nigeria. Methodology This was a three-phased evaluation study. Phase one involved development of an online training module based on the Nigerian Code of Health Research Ethics (NCHRE) and uploading it to the Collaborative Institutional Training Initiative (CITI) website while the second phase entailed the evaluation of the module for comprehensibility, readability and ease of use by 45 Nigerian biomedical researchers. The third phase involved modification and re-evaluation of the module by 30 Nigerian biomedical researchers and determination of test-retest reliability of the module using Cronbach’s alpha. Results The online module was easily accessible and comprehensible to 95% of study participants. There were significant differences in the pretest and posttest scores of study participants during the evaluation of the online module (p = 0.001) with correlation coefficients of 0.9 and 0.8 for the pretest and posttest scores respectively. The module also demonstrated excellent test-retest reliability and internal consistency as shown by Cronbach’s alpha coefficients of 0.92 and 0.84 for the pretest and posttest respectively. Conclusion The module based on the Nigerian Code was developed, tested and made available online as a valuable tool for training in cultural and societal relevant ethical principles to orient national and international biomedical researchers working in Nigeria. It would complement other general research ethics and Good Clinical Practice modules. Participants suggested that awareness of the online module should be increased through seminars, advertisement on government websites and portals used by Nigerian biomedical researchers, and incorporation of the Code into the undergraduate medical training curriculum. PMID:23281968

Aquatic Contaminant and Mercury Simulation Modules Developed for Hydrologic and Hydraulic Models

DTIC Science & Technology

2016-07-01

through the food chain. Human health may also be affected by ingesting contaminated water or fish. As a result, the criteria for protecting human...ER D C/ EL T R- 16 -8 Environmental Quality Technology Research Program Aquatic Contaminant and Mercury Simulation Modules Developed...Quality Technology Research Program ERDC/EL TR-16-8 July 2016 Aquatic Contaminant and Mercury Simulation Modules Developed for Hydrologic and

Functional specification of the Performance Measurement (PM) module

NASA Technical Reports Server (NTRS)

Berliner, J. E.

1980-01-01

The design of the Performance Measurement Module is described with emphasis on what the PM Module would do, and what it would look like to the user. The PM Module as described could take several man-years to develop. An evolutionary approach to the implementation of the PM Module is presented which would provide an operational baseline PM Module within a few months.

Development of allosteric modulators of GPCRs for treatment of CNS disorders

PubMed Central

Nickols, Hilary Highfield; Conn, P. Jeffrey

2013-01-01

The discovery of allosteric modulators of G protein-coupled receptors (GPCRs) provides a promising new strategy with potential for developing novel treatments for a variety of central nervous system (CNS) disorders. Traditional drug discovery efforts targeting GPCRs have focused on developing ligands for orthosteric sites which bind endogenous ligands. Allosteric modulators target a site separate from the orthosteric site to modulate receptor function. These allosteric agents can either potentiate (positive allosteric modulator, PAM) or inhibit (negative allosteric modulator, NAM) the receptor response and often provide much greater subtype selectivity than do orthosteric ligands for the same receptors. Experimental evidence has revealed more nuanced pharmacological modes of action of allosteric modulators, with some PAMs showing allosteric agonism in combination with positive allosteric modulation in response to endogenous ligand (ago-potentiators) as well as “bitopic” ligands that interact with both the allosteric and orthosteric sites. Drugs targeting the allosteric site allow for increased drug selectivity and potentially decreased adverse side effects. Promising evidence has demonstrated potential utility of a number of allosteric modulators of GPCRs in multiple CNS disorders, including neurodegenerative diseases such as Alzheimer’s disease, Parkinson’s disease, and Huntington’s disease, as well as psychiatric or neurobehavioral diseases such as anxiety, schizophrenia, and addiction. PMID:24076101

A Study of Parameters of the Counterpropagating Leader and its Influence on the Lightning Protection of Objects Using Large-Scale Laboratory Modeling

NASA Astrophysics Data System (ADS)

Syssoev, V. S.; Kostinskiy, A. Yu.; Makalskiy, L. M.; Rakov, A. V.; Andreev, M. G.; Bulatov, M. U.; Sukharevsky, D. I.; Naumova, M. U.

2014-04-01

In this work, the results of experiments on initiating the upward and descending leaders during the development of a long spark when studying lightning protection of objects with the help of large-scale models are shown. The influence of the counterpropagating leaders on the process of the lightning strike of ground-based and insulated objects is discussed. In the first case, the upward negative leader is initiated by the positive downward leader, which propagates from the high-voltage electrode of the "rod-rod"-type Marx generator (the rod is located on the plane and is 3-m high) in the gap with a length of 9-12 m. The positive-voltage pulse with a duration of 7500 μs had an amplitude of up to 3 MV. In the second case, initiation of the positive upward leader was performed in the electric field created by a cloud of negatively charged aerosol, which simulates the charged thunderstorm cell. In this case, all the phases characteristic of the ascending lightnings initiated by the tall ground-based objects and the triggered lightnings during the experiments with an actual thunderstorm cloud were observed in the forming spark discharge with a length of 1.5-2.0 m. The main parameters of the counterpropagating leader, which is initiated by the objects during the large-scale model experiments with a long spark, are shown.

Evaluation of Parenteral Nutrition Errors in an Era of Drug Shortages.

PubMed

Storey, Michael A; Weber, Robert J; Besco, Kelly; Beatty, Stuart; Aizawa, Kumiko; Mirtallo, Jay M

2016-04-01

Ingredient shortages have forced many organizations to change practices or use unfamiliar ingredients, which creates potential for error. Parenteral nutrition (PN) has been significantly affected, as every ingredient in PN has been impacted in recent years. Ingredient errors involving PN that were reported to the national anonymous MedMARx database between May 2009 and April 2011 were reviewed. Errors were categorized by ingredient, node, and severity. Categorization was validated by experts in medication safety and PN. A timeline of PN ingredient shortages was developed and compared with the PN errors to determine if events correlated with an ingredient shortage. This information was used to determine the prevalence and change in harmful PN errors during periods of shortage, elucidating whether a statistically significant difference exists in errors during shortage as compared with a control period (ie, no shortage). There were 1311 errors identified. Nineteen errors were associated with harm. Fat emulsions and electrolytes were the PN ingredients most frequently associated with error. Insulin was the ingredient most often associated with patient harm. On individual error review, PN shortages were described in 13 errors, most of which were associated with intravenous fat emulsions; none were associated with harm. There was no correlation of drug shortages with the frequency of PN errors. Despite the significant impact that shortages have had on the PN use system, no adverse impact on patient safety could be identified from these reported PN errors. © 2015 American Society for Parenteral and Enteral Nutrition.

Challenges and opportunities: using a science-based video game in secondary school settings

NASA Astrophysics Data System (ADS)

Muehrer, Rachel; Jenson, Jennifer; Friedberg, Jeremy; Husain, Nicole

2012-12-01

Simulations and games are not new artifacts to the study of science in secondary school settings (Hug, Kriajcik and Marx 2005), however teachers remain skeptical as to their value, use and appropriateness (Rice 2006). The difficulty is not only the design and development of effective play environments that produce measurable changes in knowledge and/or understanding, but also in their on-the-ground use (Jaipal and Figg 2010). This paper reports on the use of a science-focused video game in five very different secondary school settings in Ontario, Canada. A mixed-methods approach was used in the study, and included data gathered on general gameplay habits and technology use, as well as informal interviews with teachers and students who played the game. In total, 161 participants played a series of games focused on the "life of a plant", and were given both a pre and post quiz to determine if the game helped them retain and/or change what they knew about scientific processes like plant cell anatomy and photosynthesis. Participants showed statistically significant improvement on quizzes that were taken after playing the game for approximately one-hour sessions, despite difficulties in some cases both accessing and playing the game for the full hour. Our findings also reveal the ongoing challenges in making use of technology in a variety of school sessions, even when using a browser-based game, that demanded very little other than a reliable internet connection.

Recommendations for the development of e-modules for the continuing professional development of European dentists.

PubMed

Kavadella, A; Kossioni, A E; Tsiklakis, K; Cowpe, J; Bullock, A; Barnes, E; Bailey, S; Thomas, H; Thomas, R; Karaharju-Suvanto, T; Suomalainen, K; Kersten, H; Povel, E; Giles, M; Walmsley, D; Soboleva, U; Liepa, A; Akota, I

2013-05-01

To provide evidence-based and peer-reviewed recommendations for the development of dental continuing professional development (CPD) learning e-modules. The present recommendations are consensus recommendations of the DentCPD project team and were informed by a literature research, consultations from e-learning and IT expert, discussions amongst the participants attending a special interest group during the 2012 ADEE meeting, and feedback from the evaluation procedures of the exemplar e-module (as described in a companion paper within this Supplement). The main focus of these recommendations is on the courses and modules organised and offered by dental schools. E-modules for dental CPD, as well as for other health professionals' continuing education, have been implemented and evaluated for a number of years. Research shows that the development of e-modules is a team process, undertaken by academics, subject experts, pedagogists, IT and web designers, learning technologists and librarians. The e-module must have clear learning objectives (outcomes), addressing the learners' individual needs, and must be visually attractive, relevant, interactive, promoting critical thinking and providing feedback. The text, graphics and animations must support the objectives and enable the learning process by creating an attractive, easy to navigate and interactive electronic environment. Technology is usually a concern for learners and tutors; therefore, it must be kept simple and interoperable within different systems and software. The pedagogical and technological proficiency of educators is of paramount importance, yet remains a challenge in many instances. The development of e-courses and modules for dental CPD is an endeavour undertaken by a group of professionals. It must be underpinned by sound pedagogical and e-learning principles and must incorporate elements for effective visual learning and visual design and a simple, consistent technology. © 2013 John Wiley & Sons A/S.

Development and Evaluation of the SUMIT Microcomputer Module Entitled 'Predator Functional Response'.

ERIC Educational Resources Information Center

Shaltz, Mark B.

An experiment was conducted that compared the teaching effectiveness of a computer assisted instructional module and a lecture-discussion. The module, Predator Functional Response (PFR), was developed as part of the SUMIT (Single-concept User-adaptable Microcomputer-based Instructional Technique) project. A class of 30 students was randomly…

Bilingual Metric Education Modules for Postsecondary and Adult Vocational Education. Final Report.

ERIC Educational Resources Information Center

Ellis Associates, Inc., College Park, MD.

A project was conducted to develop three metric education modules for use with bilingual (Spanish and English) students in postsecondary and adult vocational education programs. Developed for the first section of each module, five instructional units cover basic metric concepts: (1) measuring length and finding area, (2) measuring volume, (3)…

Advancing clinical development pathways for new CFTR modulators in cystic fibrosis.

PubMed

Mayer-Hamblett, Nicole; Boyle, Michael; VanDevanter, Donald

2016-05-01

Cystic fibrosis (CF) is a life-shortening genetic disease affecting approximately 70,000 individuals worldwide. Until recently, drug development efforts have emphasised therapies treating downstream signs and symptoms resulting from the underlying CF biological defect: reduced function of the CF transmembrane conductance regulator (CFTR) protein. The current CF drug development landscape has expanded to include therapies that enhance CFTR function by either restoring wild-type CFTR protein expression or increasing (modulating) the function of mutant CFTR proteins in cells. To date, two systemic small-molecule CFTR modulators have been evaluated in pivotal clinical trials in individuals with CF and specific mutant CFTR genotypes that have led to regulatory review and/or approval. Advances in the discovery of CFTR modulators as a promising new class of therapies have been impressive, yet work remains to develop highly effective, disease-modifying modulators for individuals of all CF genotypes. The objectives of this review are to outline the challenges and opportunities in drug development created by systemic genotype-specific CFTR modulators, highlight the advantages of sweat chloride as an established biomarker of CFTR activity to streamline early-phase development and summarise options for later phase clinical trial designs that respond to the adoption of approved genotype-specific modulators into standard of care. An optimal development framework will be needed to move the most promising therapies efficiently through the drug development pipeline and ultimately deliver efficacious and safe therapies to all individuals with CF. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Sodium Heat Pipe Module Processing For the SAFE-100 Reactor Concept

NASA Technical Reports Server (NTRS)

Martin, James; Salvail, Pat

2003-01-01

To support development and hardware-based testing of various space reactor concepts, the Early Flight Fission-Test Facility (EFF-TF) team established a specialized glove box unit with ancillary systems to handle/process alkali metals. Recently, these systems have been commissioned with sodium supporting the fill of stainless steel heat pipe modules for use with a 100 kW thermal heat pipe reactor design. As part of this effort, procedures were developed and refined to govern each segment of the process covering: fill, leak check, vacuum processing, weld closeout, and final "wet in". A series of 316 stainless steel modules, used as precursors to the actual 321 stainless steel modules, were filled with 35 +/- 1 grams of sodium using a known volume canister to control the dispensed mass. Each module was leak checked to less than10(exp -10) std cc/sec helium and vacuum conditioned at 250 C to assist in the removal of trapped gases. A welding procedure was developed to close out the fill stem preventing external gases from entering the evacuated module. Finally the completed modules were vacuum fired at 750 C allowing the sodium to fully wet the internal surface and wick structure of the heat pipe module.

Sodium Heat Pipe Module Processing For the SAFE-100 Reactor Concept

NASA Astrophysics Data System (ADS)

Martin, James; Salvail, Pat

2004-02-01

To support development and hardware-based testing of various space reactor concepts, the Early Flight Fission-Test Facility (EFF-TF) team established a specialized glove box unit with ancillary systems to handle/process alkali metals. Recently, these systems have been commissioned with sodium supporting the fill of stainless steel heat pipe modules for use with a 100 kW thermal heat pipe reactor design. As part of this effort, procedures were developed and refined to govern each segment of the process covering: fill, leak check, vacuum processing, weld closeout, and final ``wet in''. A series of 316 stainless steel modules, used as precursors to the actual 321 stainless steel modules, were filled with 35 +/-1 grams of sodium using a known volume canister to control the dispensed mass. Each module was leak checked to <10-10 std cc/sec helium and vacuum conditioned at 250 °C to assist in the removal of trapped gases. A welding procedure was developed to close out the fill stem preventing external gases from entering the evacuated module. Finally the completed modules were vacuum fired at 750 °C allowing the sodium to fully wet the internal surface and wick structure of the heat pipe module.

Surface modulation of dental hard tissues

NASA Astrophysics Data System (ADS)

Tantbirojn, Daranee

Tooth surfaces play a central role in the equilibrium of dental hard tissues, in which contrasting processes lead to loss or deposition of materials. The central interest of this Thesis was the modulation of tooth surfaces to control such equilibrium. Four specific studies were carried out to investigate different classes of surface modulating agents. These are: (1) Ionic modulation of the enamel surface to enhance stain removal . Dental stain is the most apparent form of tooth surface deposit. The nature of extrinsic stain in terms of spatial chemical composition was studied by using electron probe microanalysis. An ionic surface modulating agent, sodium tripolyphosphate (STPP), was evaluated. Image analysis methodologies were developed and the ability of STPP in stain removal was proved. (2) Thin film modulation with substantive polymeric coating and the effect on in vitro enamel de/re-mineralization . A novel polymeric coating that formed a thin film on the tooth surface was investigated for its inhibitory effect on artificial enamel caries, without interfering with the remineralization process. The preventive effect was distinct, but the mineral redeposition was questionable. (3) Thick film modulation with fluoride containing sealants and the effect on in vitro enamel and root caries development. Fluoride incorporated into resin material is an example of combining different classes of surface modulating agents to achieve an optimal outcome. A proper combination, such as in resin modified glass ionomer, showed in vitro caries inhibitory effect beyond the material boundary in both enamel and dentin. (4) Thick film modulation with dental adhesives and the determination of adhesion to dentin. Dentin adhesives modulate intracoronal tooth surfaces by enhancing adhesion to restorative materials. Conventional nominal bond tests were inadequate to determine the performance of current high strength adhesives. It was shown that interfacial fracture toughness test was more appropriate. In general, this Thesis evaluates diverse tooth surface modulations, for which several experimental methodologies had to be developed. These will be invaluable for the development of succeeding generations of surface modulating agents.

NASA's Global Climate Change Education (GCCE) Program: New modules

NASA Astrophysics Data System (ADS)

Witiw, M. R.; Myers, R. J.; Schwerin, T. G.

2010-12-01

In existence for over 10 years, the Earth System Science Educational Alliance (ESSEA) through the Institute of Global Environmental Strategies (IGES) has developed a series of modules on Earth system science topics. To date, over 80 educational modules have been developed. The primary purpose of these modules is to provide graduate courses for teacher education. A typical course designed for teachers typically consists of from three to five content modules and a primer on problem-based learning. Each module is designed to take three weeks in a normal university semester. Course delivery methods vary. Some courses are completed totally online. Others are presented in the classroom. Still others are delivered using a hybrid method which combines classroom meetings with online delivery of content. Although originally designed for teachers and education students, recent changes, provide a format for general education students to use these module. In 2009, under NASA’s Global Climate Change Education (GCCE) initiative, IGES was tasked to develop 16 new modules addressing the topic of climate change. Two of the modules recently developed under this program address the topics of sunspots and thermal islands. Sunspots is a problem-based learning module where students are provided resources and sample investigations related to sunspots. The history of sunspot observations, the structure of sunspots and the possible role sunspots may have in Earth’s climate are explored. Students are then asked to determine what effects a continued minimum in sunspot activity may have on the climate system. In Thermal Islands, the topic of urban heat islands is addressed. How heat islands are produced and the role of urban heat islands in exacerbating heat waves are two of the topics covered in the resources. In this problem-based learning module, students are asked to think of mitigating strategies for these thermal islands as Earth’s urban population grows over the next 50 years. These modules were successfully piloted with undergraduate students at Seattle Pacific University.

Overview of the NCC

NASA Technical Reports Server (NTRS)

Liu, Nan-Suey

2001-01-01

A multi-disciplinary design/analysis tool for combustion systems is critical for optimizing the low-emission, high-performance combustor design process. Based on discussions between then NASA Lewis Research Center and the jet engine companies, an industry-government team was formed in early 1995 to develop the National Combustion Code (NCC), which is an integrated system of computer codes for the design and analysis of combustion systems. NCC has advanced features that address the need to meet designer's requirements such as "assured accuracy", "fast turnaround", and "acceptable cost". The NCC development team is comprised of Allison Engine Company (Allison), CFD Research Corporation (CFDRC), GE Aircraft Engines (GEAE), NASA Glenn Research Center (LeRC), and Pratt & Whitney (P&W). The "unstructured mesh" capability and "parallel computing" are fundamental features of NCC from its inception. The NCC system is composed of a set of "elements" which includes grid generator, main flow solver, turbulence module, turbulence and chemistry interaction module, chemistry module, spray module, radiation heat transfer module, data visualization module, and a post-processor for evaluating engine performance parameters. Each element may have contributions from several team members. Such a multi-source multi-element system needs to be integrated in a way that facilitates inter-module data communication, flexibility in module selection, and ease of integration. The development of the NCC beta version was essentially completed in June 1998. Technical details of the NCC elements are given in the Reference List. Elements such as the baseline flow solver, turbulence module, and the chemistry module, have been extensively validated; and their parallel performance on large-scale parallel systems has been evaluated and optimized. However the scalar PDF module and the Spray module, as well as their coupling with the baseline flow solver, were developed in a small-scale distributed computing environment. As a result, the validation of the NCC beta version as a whole was quite limited. Current effort has been focused on the validation of the integrated code and the evaluation/optimization of its overall performance on large-scale parallel systems.

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 30: Intermediate Power Supplies; Module 31: RF, IF, and Video Amplifiers. Students Guide.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This student guidebook is designed for use with the study booklets in modules 30-31 included in the military-developed course on basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. An…

NASA/First Materials Science Research Rack (MSRR-1) Module Inserts Development for the International Space Station

NASA Technical Reports Server (NTRS)

Crouch, Myscha; Carswell, Bill; Farmer, Jeff; Rose, Fred; Tidwell, Paul

1999-01-01

The Material Science Research Rack 1 (MSRR-1) of the Material Science Research Facility (MSRF) contains an Experiment Module (EM) being developed collaboratively by NASA and the European Space Agency (ESA). This NASA/ESA EM will accommodate several different removable and replaceable Module Inserts (MIs) which are installed on orbit. Two of the NASA MIs being developed for specific material science investigations are described herein.

Shielding requirements for the Space Station habitability modules

NASA Technical Reports Server (NTRS)

Avans, Sherman L.; Horn, Jennifer R.; Williamsen, Joel E.

1990-01-01

The design, analysis, development, and tests of the total meteoroid/debris protection system for the Space Station Freedom habitability modules, such as the habitation module, the laboratory module, and the node structures, are described. Design requirements are discussed along with development efforts, including a combination of hypervelocity testing and analyses. Computer hydrocode analysis of hypervelocity impact phenomena associated with Space Station habitability structures is covered and the use of optimization techniques, engineering models, and parametric analyses is assessed. Explosive rail gun development efforts and protective capability and damage tolerance of multilayer insulation due to meteoroid/debris impact are considered. It is concluded that anticipated changes in the debris environment definition and requirements will require rescoping the tests and analysis required to develop a protection system.

MLM Builder: An Integrated Suite for Development and Maintenance of Arden Syntax Medical Logic Modules

PubMed Central

Sailors, R. Matthew

1997-01-01

The Arden Syntax specification for sharable computerized medical knowledge bases has not been widely utilized in the medical informatics community because of a lack of tools for developing Arden Syntax knowledge bases (Medical Logic Modules). The MLM Builder is a Microsoft Windows-hosted CASE (Computer Aided Software Engineering) tool designed to aid in the development and maintenance of Arden Syntax Medical Logic Modules (MLMs). The MLM Builder consists of the MLM Writer (an MLM generation tool), OSCAR (an anagram of Object-oriented ARden Syntax Compiler), a test database, and the MLManager (an MLM management information system). Working together, these components form a self-contained, unified development environment for the creation, testing, and maintenance of Arden Syntax Medical Logic Modules.

Development and evaluation of form three mathematics i-Think module (Mi-T3) on algebraic formulae topic

NASA Astrophysics Data System (ADS)

Sam, Sazilah; Abdullah, Mohd Faizal Nizam Lee

2017-05-01

This article introduces the Form Three Mathematics i-Think Module (Mi-T3). The main objective of this Mi-T3 is to assist form three students develop their higher order thinking skills (HOTS). The Sidek Module Development Model (SMDM) and eight innovative thinking maps (i-Think) were applied as a guideline in developing Mi-T3. A validation stage was carried out by eight experts, and content validation achievement more than 90% obtained. A group of form three students and teachers was piloted to check the module's reliability through one to one and small group evaluation and Cronbach Alpha more than 0.90 was obtained. Implications of the study are discussed in this article.

Project-Based Module Development.

ERIC Educational Resources Information Center

Meel, R. M. van

A project management design for modularizing higher education at open universities was developed and tested. Literature in the fields of project management and development of modular curriculum materials was reviewed and used as a basis for developing a project-based approach to the process of developing modules for self-instruction. According to…

Residential photovoltaic module and array requirements study

NASA Technical Reports Server (NTRS)

Nearhoof, S. L.; Oster, J. R.

1979-01-01

Design requirements for photovoltaic modules and arrays used in residential applications were identified. Building codes and referenced standards were reviewed for their applicability to residential photovoltaic array installations. Four installation types were identified - integral (replaces roofing), direct (mounted on top of roofing), stand-off (mounted away from roofing), and rack (for flat or low slope roofs, or ground mounted). Installation costs were developed for these mounting types as a function of panel/module size. Studies were performed to identify optimum module shapes and sizes and operating voltage cost drivers. It is concluded that there are no perceived major obstacles to the use of photovoltaic modules in residential arrays. However, there is no applicable building code category for residential photovoltaic modules and arrays and additional work with standards writing organizations is needed to develop residential module and array requirements.