Earth Observing System (EOS) Advanced Microwave Sounding Unit-A (AMSU-A) schedule plan

NASA Technical Reports Server (NTRS)

1994-01-01

This report describes Aerojet's methods and procedures used to control and administer contractual schedules for the EOS/AMSU-A program. Included are the following: the master, intermediate, and detail schedules; critical path analysis; and the total program logic network diagrams.

Adapting Scheduling Programs for Educational Specifications.

ERIC Educational Resources Information Center

Glass, Thomas E.

1984-01-01

Planners of a new Arizona school used the district's existing computerized master scheduling program to identify instructional spaces needed. Total classroom needs by subject were translated into total square footage requirements. (MLF)

The Basic Organizing/Optimizing Training Scheduler (BOOTS): User's Guide. Technical Report 151.

ERIC Educational Resources Information Center

Church, Richard L.; Keeler, F. Laurence

This report provides the step-by-step instructions required for using the Navy's Basic Organizing/Optimizing Training Scheduler (BOOTS) system. BOOTS is a computerized tool designed to aid in the creation of master training schedules for each Navy recruit training command. The system is defined in terms of three major functions: (1) data file…

An Examination of Virginia Elementary School Principals' Scheduling Decisions Regarding Opportunities for Students to Participate in Physical Activity during the School Day

ERIC Educational Resources Information Center

Greve, Andrew W.

2017-01-01

The principal is ultimately responsible for decisions regarding the master schedule at the elementary level of education (Canady & Rettig, 2013; Young, 2008), and these scheduling decisions are influenced by multiple factors (Benamati, 2010; Harris, 2013; Howard & Rakoz, 2009). Although principals have become increasingly aware of the need…

Quality Improvement, Inventory Management, Lead Time Reduction and Production Scheduling in High-Mix Manufacturing Environments

DTIC Science & Technology

2017-01-13

Quality Improvement, Inventory Management, Lead Time Reduction and Production Scheduling in High-mix Manufacturing Environments by Sean Daigle B.S...for the degree of Master of Engineering in Advanced Manufacturing and Design at the MASSACHUSETTS INSTITUTE OF TECHNOLOGY February 2017 c... Production Scheduling in High-mix Manufacturing Environments by Sean Daigle Submitted to the Department of Mechanical Engineering on January 13, 2017, in

The One-Year Residency Program: An Alternative Path to the Master's Degree in Social Work.

ERIC Educational Resources Information Center

Salmon, Robert; Walker, Joel

1981-01-01

At Hunter College an alternative master's program for social workers who cannot give up employment for full-time study replaces the traditional scheduling with three flexible time periods: pre-fieldwork and post-fieldwork, part-time coursework, and one-year, four-day-a-week fieldwork experience in the place of employment. (MSE)

Basic Botany On-Line: A Training Tool for the Master Gardener Program.

ERIC Educational Resources Information Center

VanDerZanden, Ann Marie; Rost, Bob; Eckel, Rick

2002-01-01

A noncredit, online training module on botany was offered to participants in the Oregon Master Gardener program. The 48 participants felt the module was a useful training tool. They also noted that the convenience of completing the material at their own pace and during a time that fit into their schedule. (SK)

75 FR 8751 - Records Schedules; Availability and Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-25

..., Administration on Aging (N1-439-09-2, 14 items, 14 temporary items). Schedules of daily activities and files of... Services, Administration on Aging (N1-439-09-4, 9 items, 8 temporary items). Master data files containing... associated with the death of active duty military personnel. Proposed for permanent retention are such...

Optimizing The Scheduling Of Recruitment And Initial Training For Soldiers In The Australian Army

DTIC Science & Technology

2016-03-01

SCHEDULING OF RECRUITMENT AND INITIAL TRAINING FOR SOLDIERS IN THE AUSTRALIAN ARMY by Melissa T. Joy March 2016 Thesis Advisor: Kenneth...SOLDIERS IN THE AUSTRALIAN ARMY 5. FUNDING NUMBERS 6. AUTHOR(S) Melissa T. Joy 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Naval...This thesis develops a master scheduling program to optimize recruitment into the Australian Army by employment category. The goal of the model

Research on the ITOC based scheduling system for ship piping production

NASA Astrophysics Data System (ADS)

Li, Rui; Liu, Yu-Jun; Hamada, Kunihiro

2010-12-01

Manufacturing of ship piping systems is one of the major production activities in shipbuilding. The schedule of pipe production has an important impact on the master schedule of shipbuilding. In this research, the ITOC concept was introduced to solve the scheduling problems of a piping factory, and an intelligent scheduling system was developed. The system, in which a product model, an operation model, a factory model, and a knowledge database of piping production were integrated, automated the planning process and production scheduling. Details of the above points were discussed. Moreover, an application of the system in a piping factory, which achieved a higher level of performance as measured by tardiness, lead time, and inventory, was demonstrated.

Evolutionary space platform concept study. Volume 3: Programmatics for manned space platform concepts

NASA Technical Reports Server (NTRS)

1982-01-01

The programmatic data for the reference concept of the Manned Space Platform is presented. Details regarding work breakdown structure (WBS) and dictionary, the facilities and equipment required to produce the modules, the project schedule and logic diagram, a preliminary assessment of environmental impacts and details regarding the estimated costs for the reference concept are included. The proposed WBS which was developed to provide summary and system level segregation of the nonrecurring and recurring portions of the Manned Space Platform project is also included. The accompanying dictionary outlines the function and activities contained within each WBS element. The facility and equipment required to produce the various modules is discussed. Generally, required equipment is within the existing state of the art although the size of some of the items to be manufactured is a consideration. A preliminary manufacturing flow was also provided. The project schedules presented consist of the Master Project Summary Schedule, the Master Project Phasing Chart and the Logic Network.

7 CFR 43.104 - Master table of single and double sampling plans.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Master table of single and double sampling plans. 43... STANDARD CONTAINER REGULATIONS STANDARDS FOR SAMPLING PLANS Sampling Plans § 43.104 Master table of single and double sampling plans. (a) In the master table, a sampling plan is selected by first determining...

7 CFR 43.104 - Master table of single and double sampling plans.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Master table of single and double sampling plans. 43... STANDARD CONTAINER REGULATIONS STANDARDS FOR SAMPLING PLANS Sampling Plans § 43.104 Master table of single and double sampling plans. (a) In the master table, a sampling plan is selected by first determining...

7 CFR 43.104 - Master table of single and double sampling plans.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Master table of single and double sampling plans. 43... STANDARD CONTAINER REGULATIONS STANDARDS FOR SAMPLING PLANS Sampling Plans § 43.104 Master table of single and double sampling plans. (a) In the master table, a sampling plan is selected by first determining...

7 CFR 43.104 - Master table of single and double sampling plans.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Master table of single and double sampling plans. 43... STANDARD CONTAINER REGULATIONS STANDARDS FOR SAMPLING PLANS Sampling Plans § 43.104 Master table of single and double sampling plans. (a) In the master table, a sampling plan is selected by first determining...

Feeding and metabolic consequences of scheduled consumption of large, binge-type meals of high fat diet in the Sprague-Dawley rat.

PubMed

Bake, T; Morgan, D G A; Mercer, J G

2014-04-10

Providing rats and mice with access to palatable high fat diets for a short period each day induces the consumption of substantial binge-like meals. Temporal food intake structure (assessed using the TSE PhenoMaster/LabMaster system) and metabolic outcomes (oral glucose tolerance tests [oGTTs], and dark phase glucose and insulin profiles) were examined in Sprague-Dawley rats given access to 60% high fat diet on one of 3 different feeding regimes: ad libitum access (HF), daily 2 h-scheduled access from 6 to 8 h into the dark phase (2 h-HF), and twice daily 1 h-scheduled access from both 1-2 h and 10-11 h into the dark phase (2×1 h-HF). Control diet remained available during the scheduled access period. HF rats had the highest caloric intake, body weight gain, body fat mass and plasma insulin. Both schedule-fed groups rapidly adapted their feeding behaviour to scheduled access, showing large meal/bingeing behaviour with 44% or 53% of daily calories consumed from high fat diet during the 2 h or 2×1 h scheduled feed(s), respectively. Both schedule-fed groups had an intermediate caloric intake and body fat mass compared to HF and control (CON) groups. Temporal analysis of food intake indicated that schedule-fed rats consumed large binge-type high fat meals without a habitual decrease in preceding intake on control diet, suggesting that a relative hypocaloric state was not responsible or required for driving the binge episode, and substantiating previous indications that binge eating may not be driven by hypothalamic energy balance neuropeptides. In an oGTT, both schedule-fed groups had impaired glucose tolerance with higher glucose and insulin area under the curve, similar to the response in ad libitum HF fed rats, suggesting that palatable feeding schedules represent a potential metabolic threat. Scheduled feeding on high fat diet produces similar metabolic phenotypes to mandatory (no choice) high fat feeding and may be a more realistic platform for mechanistic study of diet-induced obesity. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

A Study of the Operating Room Scheduling System at Tripler Army Medical Center, Hawaii

DTIC Science & Technology

1981-08-01

PROCESSING CLASS V SYSTEM .... .......... . A BIBLIOGRAPHY ....... ........... . . . .. . ii ’I. INTRODUCTIO9 Development of the Problem Convinced that...of the most difficult administrativo tasks that a modern hospital must face, and proposed using a combination of a master posting sheet and a...deal with scheduling problems.9 This particular process also incorporates the two-room system doscribed earlier, and the author admits that this

Improving Intercontinental Ballistic Missile Maintenance Scheduling Through the Use of Location Analysis Methodologies

DTIC Science & Technology

2006-03-01

Requirements for the Degree of Master of Science in Logistics Management Dale L. Overholts II, BS Capt, USAF March 2006 APPROVED...distance (e. g . , travel time or cost, demand satisfaction) is fundamental to such problems” (Current et al, 2002:86). The set covering location... the total number of scheduled launch facilities, can be found in Appendix F. Appendix G provides detailed information regarding the impacts of

Distributed Topology Organization and Transmission Scheduling in Wireless Ad Hoc Networks

DTIC Science & Technology

2004-01-01

slot consists of two mini -slots that support that support full-duplex transfer–one for master-to-slave transmission and the other from slave-to-master...protocol storage requirement would only be 208 bits in this case. 111 Communication requirements Each half-duplex mini -slot can be used by either a data or...either a data or control packet, eq. (4.2) sets the minimum half-duplex mini -slot size in the system or equivalently, the maximum system period

Program Scheduling Handbook.

DTIC Science & Technology

1980-03-01

account the outcome of any other task. Each activity must be estimated as a stand-alone entity from the network (statistical indep ndence). The... stress the term program as miiore in dUsive than contract in the WBS and Master Schedule. In this chapter we will present one very usable approach to...questions, not raise them. Use different colored cards to represent the SPO, the contractior, procurement, and any other agency that play, a major role in the

Conception of Self-Construction Production Scheduling System

NASA Astrophysics Data System (ADS)

Xue, Hai; Zhang, Xuerui; Shimizu, Yasuhiro; Fujimura, Shigeru

With the high speed innovation of information technology, many production scheduling systems have been developed. However, a lot of customization according to individual production environment is required, and then a large investment for development and maintenance is indispensable. Therefore now the direction to construct scheduling systems should be changed. The final objective of this research aims at developing a system which is built by it extracting the scheduling technique automatically through the daily production scheduling work, so that an investment will be reduced. This extraction mechanism should be applied for various production processes for the interoperability. Using the master information extracted by the system, production scheduling operators can be supported to accelerate the production scheduling work easily and accurately without any restriction of scheduling operations. By installing this extraction mechanism, it is easy to introduce scheduling system without a lot of expense for customization. In this paper, at first a model for expressing a scheduling problem is proposed. Then the guideline to extract the scheduling information and use the extracted information is shown and some applied functions are also proposed based on it.

What to Do until the Microprocesser Arrives.

ERIC Educational Resources Information Center

Barzilla, Frank

1983-01-01

Advises administrators how to develop an energy master plan and how to reduce the usage of heating, ventilating, and air conditioning (HVAC) systems by means of a time clock, thermostat, and a scheduled preventive maintenance program. (MLF)

ORION mobile unit design

NASA Technical Reports Server (NTRS)

Brunn, D. L.; Wu, S. C.; Thom, E. H.; Mclaughlin, F. D.; Sweetser, B. M.

1980-01-01

An overview of the design of the ORION mobile system is presented. System capability and performance characteristics are outlined. Functional requirements and key performance parameters are stated for each of the nine subsystems. A master design and implementation schedule is given.

Using Earned Value Data to Forecast the Duration of Department of Defense (DoD) Space Acquisition Programs

DTIC Science & Technology

2015-03-26

acquisition programs’ cost and schedule. Many prior studies have focused on the overall cost of programs (the cost estimate at completion (EAC)) ( Smoker ...regression ( Smoker , 2011), the Kalman Filter Forecasting Method (Kim, 2007), and analysis of the Integrated Master Schedule (IMS). All of the...A study by Smoker demonstrated this technique by first regressing the BCWP against months and the same approach for BAC (2011). In that study

Exploratory Model Analysis of the Space Based Infrared System (SBIRS) Low Global Scheduler Problem

DTIC Science & Technology

1999-12-01

solution. The non- linear least squares model is defined as Y = f{e,t) where: 0 =M-element parameter vector Y =N-element vector of all data t...NAVAL POSTGRADUATE SCHOOL Monterey, California THESIS EXPLORATORY MODEL ANALYSIS OF THE SPACE BASED INFRARED SYSTEM (SBIRS) LOW GLOBAL SCHEDULER...December 1999 3. REPORT TYPE AND DATES COVERED Master’s Thesis 4. TITLE AND SUBTITLE EXPLORATORY MODEL ANALYSIS OF THE SPACE BASED INFRARED SYSTEM

Self-scheduling with Microsoft Excel.

PubMed

Irvin, S A; Brown, H N

1999-01-01

Excessive time was being spent by the emergency department (ED) staff, head nurse, and unit secretary on a complex 6-week manual self-scheduling system. This issue, plus inevitable errors and staff dissatisfaction, resulted in a manager-lead initiative to automate elements of the scheduling process using Microsoft Excel. The implementation of this initiative included: common coding of all 8-hour and 12-hour shifts, with each 4-hour period represented by a cell; the creation of a 6-week master schedule using the "count-if" function of Excel based on current staffing guidelines; staff time-off requests then entered by the department secretary; the head nurse, with staff input, then fine-tuned the schedule to provide even unit coverage. Outcomes of these changes included an increase in staff satisfaction, time saved by the head nurse, and staff work time saved because there was less arguing about the schedule. Ultimately, the automated self-scheduling method was expanded to the entire 700-bed hospital.

Scheduling "Go with the Flow."

ERIC Educational Resources Information Center

Yucht, Alice

1999-01-01

Presents guidelines for creating a Master Planner for the school year. Highlights several factors to consider, including annual classroom projects; standardized testing dates; report card dates; special assembly programs and local/national/world events; book fairs; and end of the year activities. (AEF)

Automotive Manufacturing Assessment System : Volume 1. Master Product Schedules.

DOT National Transportation Integrated Search

1999-11-01

Volume I is part of a four volume set documenting areas of research resulting from the development of the Automotive Manufacturing Assessment System (AMAS) for the DOT/Transportation Systems Center. AMAS was designed to assist in the evaluation of in...

Knowledge-based systems for power management

NASA Technical Reports Server (NTRS)

Lollar, L. F.

1992-01-01

NASA-Marshall's Electrical Power Branch has undertaken the development of expert systems in support of further advancements in electrical power system automation. Attention is given to the features (1) of the Fault Recovery and Management Expert System, (2) a resource scheduler or Master of Automated Expert Scheduling Through Resource Orchestration, and (3) an adaptive load-priority manager, or Load Priority List Management System. The characteristics of an advisory battery manager for the Hubble Space Telescope, designated the 'nickel-hydrogen expert system', are also noted.

Cost and Schedule Control Management: What the Department of Defense Major Acquisition System Program Manager Needs to Know

DTIC Science & Technology

1992-03-01

public release; distribution is unlimited. 2b. DECLASSIFICATION/DOWNGRADING SCHEDULE 4. PERFORMING ORGANIZATION REPORT NUMBER( S ) S . MONITORING...ORGANIZATION REPORT NUMBER( S ) Sa. NAME OF PERFORMING ORGANIZATION 6b. OFFICE SYMBOL 7a. NAME OF MONITORING ORGANIZATION Naval Postgraduate School (If appikable...PERSONAL AUTHOR( S ) Coutteau, Charles G. 13a. TYPE OF REPORT 1 3b. TIME COVE RED 14. DATE OF REPORT (year, month, day) 1S. PAGE COUNT Master’s TheisI From

Materials experiment carrier concepts definition study. Volume 3: Programmatics, part 2

NASA Technical Reports Server (NTRS)

1981-01-01

Project logic, schedule and funding information was derived to enable decisions to be made regarding implementation of MEC system development. A master schedule and cost and price estimates (ROM) were developed for a project that consists of development of an all-up MEC, its integration with payloads and its flight on one 90 day mission. In Part 2 of the study a simple initial MEC was defined to accommodate three MPS baseline payloads. The design of this initial MEC is illustrated. The project logic, detailed schedules, and ROM cost estimate relate to a project in which this initial MEC is developed, integrated with payloads and flown once for 180 days.

Integrated Logistics Support Plan (ILSP) for the Ports and Waterways Safety System (PAWSS) Project - A Level I Major Acquisition

DOT National Transportation Integrated Search

1997-09-30

This Integrated Logistics Support Plan (ILSP) serves as the master logistics planning document that describes necessary logistic activities, assigns responsibility for those activities, and establishes a schedule for completion. It is one of the init...

75 FR 52993 - Records Schedules; Availability and Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-30

... information system used to track case files involving internal agency investigations. 13. Department of... Inspection Service (N1-463-09-10, 1 item, 1 temporary item). Master files of an electronic information system... an electronic information system containing data that supports financial management and accounting...

Austin Community College Comprehensive Master Plan, 2000-2001.

ERIC Educational Resources Information Center

Austin Community Coll., TX.

This document describes Austin Community College's (Texas) educational academic plans, facilities plans, and financial implementation plans for 2000-2001. Plan goals and priorities include: (1) enhancing scheduling efficiency while responding to unmet student demand and community needs, and increasing enrollments by 3-5%; (2) opening two…

76 FR 43354 - Records Schedules; Availability and Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-20

...). Master files of an electronic information system containing network security information such as lists of... scores. 11. Department of Homeland Security, U.S. Immigration and Customs Enforcement (N1-567-11-5, 2... enforcement officers to receive agency credentials. 12. Department of Homeland Security, U.S. Immigration and...

33 CFR 401.80 - Reporting dangerous cargo.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Reporting dangerous cargo. 401.80... dangerous cargo. (a) The master of any explosive vessel or hazardous cargo vessel shall report to a Seaway station, as set out in Schedule III, the nature, quantity, and IMO classification of the dangerous cargo...

33 CFR 401.80 - Reporting dangerous cargo.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Reporting dangerous cargo. 401.80... dangerous cargo. (a) The master of any explosive vessel or hazardous cargo vessel shall report to a Seaway station, as set out in Schedule III, the nature, quantity, and IMO classification of the dangerous cargo...

33 CFR 401.80 - Reporting dangerous cargo.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false Reporting dangerous cargo. 401.80... dangerous cargo. (a) The master of any explosive vessel or hazardous cargo vessel shall report to a Seaway station, as set out in Schedule III, the nature, quantity, and IMO classification of the dangerous cargo...

33 CFR 401.80 - Reporting dangerous cargo.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 3 2014-07-01 2014-07-01 false Reporting dangerous cargo. 401.80... dangerous cargo. (a) The master of any explosive vessel or hazardous cargo vessel shall report to a Seaway station, as set out in Schedule III, the nature, quantity, and IMO classification of the dangerous cargo...

33 CFR 401.80 - Reporting dangerous cargo.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 3 2013-07-01 2013-07-01 false Reporting dangerous cargo. 401.80... dangerous cargo. (a) The master of any explosive vessel or hazardous cargo vessel shall report to a Seaway station, as set out in Schedule III, the nature, quantity, and IMO classification of the dangerous cargo...

77 FR 66872 - Records Schedules; Availability and Request for Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-07

... lease and exploration. 4. Department of Justice, Agency-wide (DAA-0060-2012-0017, 1 item, 1 temporary.... Department of Justice, Federal Bureau of Investigation (N1-65- 12-1, 3 items, 3 temporary items). Master... victims of child pornography. 6. Department of Justice, Federal Bureau of Investigation (N1-65- 12-4, 5...

Agile Systems Engineering-Kanban Scheduling Subsection

DTIC Science & Technology

2017-03-10

including both online and standalone versions. RESEARCH GOALS The overall Agile SE Management Project research goals are to: 1. Identify agile...March 10, 2017 5 Establish a better technical project management and... Project Management ,” Master of Science Project , Stevens Institute, to be completed in May, 2017. • Smith, Jeffrey, “System of Systems Task

Modular space station phase B extension program master plan

NASA Technical Reports Server (NTRS)

Munsey, E. H.

1971-01-01

The project is defined for design, development, fabrication, test, and pre-mission and mission operations of a shuttle-launched modular space station. The project management approach is described in terms of organization, management requirements, work breakdown structure, schedule, time-phased logic, implementation plans, manpower, and funding. The programmatic and technical problems are identified.

Collaborative Resource Allocation

NASA Technical Reports Server (NTRS)

Wang, Yeou-Fang; Wax, Allan; Lam, Raymond; Baldwin, John; Borden, Chester

2007-01-01

Collaborative Resource Allocation Networking Environment (CRANE) Version 0.5 is a prototype created to prove the newest concept of using a distributed environment to schedule Deep Space Network (DSN) antenna times in a collaborative fashion. This program is for all space-flight and terrestrial science project users and DSN schedulers to perform scheduling activities and conflict resolution, both synchronously and asynchronously. Project schedulers can, for the first time, participate directly in scheduling their tracking times into the official DSN schedule, and negotiate directly with other projects in an integrated scheduling system. A master schedule covers long-range, mid-range, near-real-time, and real-time scheduling time frames all in one, rather than the current method of separate functions that are supported by different processes and tools. CRANE also provides private workspaces (both dynamic and static), data sharing, scenario management, user control, rapid messaging (based on Java Message Service), data/time synchronization, workflow management, notification (including emails), conflict checking, and a linkage to a schedule generation engine. The data structure with corresponding database design combines object trees with multiple associated mortal instances and relational database to provide unprecedented traceability and simplify the existing DSN XML schedule representation. These technologies are used to provide traceability, schedule negotiation, conflict resolution, and load forecasting from real-time operations to long-range loading analysis up to 20 years in the future. CRANE includes a database, a stored procedure layer, an agent-based middle tier, a Web service wrapper, a Windows Integrated Analysis Environment (IAE), a Java application, and a Web page interface.

Stochastic flow shop scheduling of overlapping jobs on tandem machines in application to optimizing the US Army's deliberate nuclear, biological, and chemical decontamination process, (final report). Master's thesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Novikov, V.

1991-05-01

The U.S. Army's detailed equipment decontamination process is a stochastic flow shop which has N independent non-identical jobs (vehicles) which have overlapping processing times. This flow shop consists of up to six non-identical machines (stations). With the exception of one station, the processing times of the jobs are random variables. Based on an analysis of the processing times, the jobs for the 56 Army heavy division companies were scheduled according to the best shortest expected processing time - longest expected processing time (SEPT-LEPT) sequence. To assist in this scheduling the Gap Comparison Heuristic was developed to select the best SEPT-LEPTmore » schedule. This schedule was then used in balancing the detailed equipment decon line in order to find the best possible site configuration subject to several constraints. The detailed troop decon line, in which all jobs are independent and identically distributed, was then balanced. Lastly, an NBC decon optimization computer program was developed using the scheduling and line balancing results. This program serves as a prototype module for the ANBACIS automated NBC decision support system.... Decontamination, Stochastic flow shop, Scheduling, Stochastic scheduling, Minimization of the makespan, SEPT-LEPT Sequences, Flow shop line balancing, ANBACIS.« less

Implementation of authentic assessment in the project based learning to improve student's concept mastering

NASA Astrophysics Data System (ADS)

Sambeka, Yana; Nahadi, Sriyati, Siti

2017-05-01

The study aimed to obtain the scientific information about increase of student's concept mastering in project based learning that used authentic assessment. The research was conducted in May 2016 at one of junior high school in Bandung in the academic year of 2015/2016. The research method was weak experiment with the one-group pretest-posttest design. The sample was taken by random cluster sampling technique and the sample was 24 students. Data collected through instruments, i.e. written test, observation sheet, and questionnaire sheet. Student's concept mastering test obtained N-Gain of 0.236 with the low category. Based on the result of paired sample t-test showed that implementation of authentic assessment in the project based learning increased student's concept mastering significantly, (sig<0.05).

77 FR 66794 - Proposed Information Collection; Comment Request; Generic Clearance for Master Address File (MAF...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-07

... to measure the quality of the MAF. Test 22 is currently a one-time project scheduled for fiscal year... designed to be kept up-to-date, thereby eliminating the need to develop a completely new address list for future censuses and surveys. The Census Bureau plans to use the MTdb [[Page 66795

A Study of Career Development, Learning Motivation, and Learning Satisfaction of Adult Learners in Unconventional Scheduling Graduate Programs

ERIC Educational Resources Information Center

Chu, Hui-Chin; Hsieh, Mei-Chi; Chang, Shan-Chih

2007-01-01

The study aimed at investigating the relationships among career development, learning motivation, and learning satisfaction of adult learners in master's programs at S University. Questionnaires were distributed with 211 valid returns (71%). The results indicated that some of the demographics are factors affecting both of the learners' learning…

36 CFR 1237.26 - What materials and processes must agencies use to create audiovisual records?

Code of Federal Regulations, 2011 CFR

2011-07-01

...) If using reversal type processing, require full photographic reversal; i.e., develop, bleach, expose...-digital or scanned digital images that are scheduled as permanent or unscheduled, a record (or master) version of each image must be comparable in quality to a 35 mm film photograph or better, and must be...

36 CFR 1237.26 - What materials and processes must agencies use to create audiovisual records?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) If using reversal type processing, require full photographic reversal; i.e., develop, bleach, expose...-digital or scanned digital images that are scheduled as permanent or unscheduled, a record (or master) version of each image must be comparable in quality to a 35 mm film photograph or better, and must be...

36 CFR § 1237.26 - What materials and processes must agencies use to create audiovisual records?

Code of Federal Regulations, 2013 CFR

2013-07-01

... recommendations. (3) If using reversal type processing, require full photographic reversal; i.e., develop, bleach...-digital or scanned digital images that are scheduled as permanent or unscheduled, a record (or master) version of each image must be comparable in quality to a 35 mm film photograph or better, and must be...

36 CFR 1237.26 - What materials and processes must agencies use to create audiovisual records?

Code of Federal Regulations, 2012 CFR

2012-07-01

...) If using reversal type processing, require full photographic reversal; i.e., develop, bleach, expose...-digital or scanned digital images that are scheduled as permanent or unscheduled, a record (or master) version of each image must be comparable in quality to a 35 mm film photograph or better, and must be...

36 CFR 1237.26 - What materials and processes must agencies use to create audiovisual records?

Code of Federal Regulations, 2014 CFR

2014-07-01

...) If using reversal type processing, require full photographic reversal; i.e., develop, bleach, expose...-digital or scanned digital images that are scheduled as permanent or unscheduled, a record (or master) version of each image must be comparable in quality to a 35 mm film photograph or better, and must be...

Flying a College on the Computer. The Use of the Computer in Planning Buildings.

ERIC Educational Resources Information Center

Saint Louis Community Coll., MO.

Upon establishment of the St. Louis Junior College District, it was decided to make use of computer si"ulation facilities of a nearby aero-space contractor to develop a master schedule for facility planning purposes. Projected enrollments and course offerings were programmed with idealized student-teacher ratios to project facility needs. In…

46 CFR 169.833 - Fire and boat drills.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Fire and boat drills. 169.833 Section 169.833 Shipping... Operations Tests, Drills, and Inspections § 169.833 Fire and boat drills. (a) When the vessel is operating, the master shall conduct a fire and boat drill each week. The scheduling of drills is at the...

46 CFR 169.833 - Fire and boat drills.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Fire and boat drills. 169.833 Section 169.833 Shipping... Operations Tests, Drills, and Inspections § 169.833 Fire and boat drills. (a) When the vessel is operating, the master shall conduct a fire and boat drill each week. The scheduling of drills is at the...

46 CFR 169.833 - Fire and boat drills.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Fire and boat drills. 169.833 Section 169.833 Shipping... Operations Tests, Drills, and Inspections § 169.833 Fire and boat drills. (a) When the vessel is operating, the master shall conduct a fire and boat drill each week. The scheduling of drills is at the...

46 CFR 169.833 - Fire and boat drills.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Fire and boat drills. 169.833 Section 169.833 Shipping... Operations Tests, Drills, and Inspections § 169.833 Fire and boat drills. (a) When the vessel is operating, the master shall conduct a fire and boat drill each week. The scheduling of drills is at the...

46 CFR 169.833 - Fire and boat drills.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Fire and boat drills. 169.833 Section 169.833 Shipping... Operations Tests, Drills, and Inspections § 169.833 Fire and boat drills. (a) When the vessel is operating, the master shall conduct a fire and boat drill each week. The scheduling of drills is at the...

Extension of the master sintering curve for constant heating rate modeling

NASA Astrophysics Data System (ADS)

McCoy, Tammy Michelle

The purpose of this work is to extend the functionality of the Master Sintering Curve (MSC) such that it can be used as a practical tool for predicting sintering schemes that combine both a constant heating rate and an isothermal hold. Rather than just being able to predict a final density for the object of interest, the extension to the MSC will actually be able to model a sintering run from start to finish. Because the Johnson model does not incorporate this capability, the work presented is an extension of what has already been shown in literature to be a valuable resource in many sintering situations. A predicted sintering curve that incorporates a combination of constant heating rate and an isothermal hold is more indicative of what is found in real-life sintering operations. This research offers the possibility of predicting the sintering schedule for a material, thereby having advanced information about the extent of sintering, the time schedule for sintering, and the sintering temperature with a high degree of accuracy and repeatability. The research conducted in this thesis focuses on the development of a working model for predicting the sintering schedules of several stabilized zirconia powders having the compositions YSZ (HSY8), 10Sc1CeSZ, 10Sc1YSZ, and 11ScSZ1A. The compositions of the four powders are first verified using x-ray diffraction (XRD) and the particle size and surface area are verified using a particle size analyzer and BET analysis, respectively. The sintering studies were conducted on powder compacts using a double pushrod dilatometer. Density measurements are obtained both geometrically and using the Archimedes method. Each of the four powders is pressed into ¼" diameter pellets using a manual press with no additives, such as a binder or lubricant. Using a double push-rod dilatometer, shrinkage data for the pellets is obtained over several different heating rates. The shrinkage data is then converted to reflect the change in relative density of the pellets based on the green density and the theoretical density of each of the compositions. The Master Sintering Curve (MSC) model is then utilized to generate data that can be utilized to predict the final density of the respective powder over a range of heating rates. The Elton Master Sintering Curve Extension (EMSCE) is developed to extend the functionality of the MSC tool. The parameters generated from the original MSC are used in tandem with the solution to the closed integral, theta ≡ 1cTo T1Texp -QRT dT, over a set range of temperatures. The EMSCE is used to generate a set of sintering curves having both constant heating rate and isothermal hold portions. The EMSCE extends the usefulness of the MSC by allowing this generation of a complete sintering schedule rather than just being able to predict the final relative density of a given material. The EMSCE is verified by generating a set of curves having both constant heating rate and an isothermal hold for the heat-treatment. The modeled curves are verified experimentally and a comparison of the model and experimental results are given for a selected composition. Porosity within the final product can hinder the product from sintering to full density. It is shown that some of the compositions studied did not sinter to full density because of the presence of large porosity that could not be eliminated in a reasonable amount of time. A statistical analysis of the volume fraction of porosity is completed to show the significance of the presence in the final product. The reason this is relevant to the MSC is that the model does not take into account the presence of porosity and assumes that the samples sinter to full density. When this does not happen, the model actually under-predicts the final density of the material.

KSC-00pp0144

NASA Image and Video Library

2000-02-01

KENNEDY SPACE CENTER, Fla. -- Under gray skies, the Rotating Service Structure rolls back into its protective position around Space Shuttle Endeavour on Launch Pad 39A. The launch of Endeavour on mission STS-99 was delayed when NASA managers decided to replace the Enhanced Master Events Controller that became suspect during the Jan. 31 launch countdown. The next scheduled launch is NET Feb. 9

KSC00pp0144

NASA Image and Video Library

2000-02-01

KENNEDY SPACE CENTER, Fla. -- Under gray skies, the Rotating Service Structure rolls back into its protective position around Space Shuttle Endeavour on Launch Pad 39A. The launch of Endeavour on mission STS-99 was delayed when NASA managers decided to replace the Enhanced Master Events Controller that became suspect during the Jan. 31 launch countdown. The next scheduled launch is NET Feb. 9

KSC00pp0142

NASA Image and Video Library

2000-02-01

KENNEDY SPACE CENTER, Fla. -- Space Shuttle Endeavour sits on Launch Pad 39A waiting for the Rotating Service Structure to be rolled back into its protective position. The launch of Space Shuttle Endeavour on mission STS-99 was delayed when NASA managers decided to replace the Enhanced Master Events Controller that became suspect during the Jan. 31 launch countdown. The next scheduled launch is NET Feb. 9

KSC-00pp0142

NASA Image and Video Library

2000-02-01

KENNEDY SPACE CENTER, Fla. -- Space Shuttle Endeavour sits on Launch Pad 39A waiting for the Rotating Service Structure to be rolled back into its protective position. The launch of Space Shuttle Endeavour on mission STS-99 was delayed when NASA managers decided to replace the Enhanced Master Events Controller that became suspect during the Jan. 31 launch countdown. The next scheduled launch is NET Feb. 9

Comparison of commercial RNA extraction kits and qPCR master mixes for studying gene expression in small biopsy tissue samples from the equine gastric epithelium.

PubMed

Tesena, Parichart; Korchunjit, Wasamon; Taylor, Jane; Wongtawan, Tuempong

2017-01-01

Gastric tissue biopsy and gene expression analysis are important tools for disease diagnosis and study of the physiology of the equine stomach. However, RNA extraction from gastric biopsy samples is a complex procedure because the samples contain low quantities of RNA and are contaminated with mucous protein and bacterial flora. The objectives of these studies were to compare the performance of RNA extraction methods and to investigate the sensitivity of commercial qPCR master mixes for gene expression analysis of gastric biopsy samples. Three commercial RNA extraction methods (TRIzol ™ , GENEzol ™ and MiniPrep ™ ) and four qPCR master mixes with SYBR ® green (qPCRBIO, KAPA, QuantiNova, and PerfeCTa) were compared. RNA qualification and quantitation were compared. Real-time PCR was used to compare qPCR master mixes. The results revealed that TRIzol and GENEzol obtained significantly higher yield of RNA (P<0.01) but that TRIzol had the highest contamination of protein and DNA (P<0.05). Conversely, MiniPrep resulting in a significantly higher purification of RNA (P<0.05) but provided the lowest yield of RNA (P<0.01). For PCR master mixes, KAPA was significantly (P<0.05) more sensitive than other qPCR kits for all amounts of DNA template, particularly at the lowest amount of cDNA. In conclusion, GENEzol is the best method to obtain a high RNA yield and purification and it is more cost-effective than the others as well. Regarding the qPCR master mixes, KAPA SYBR qPCR Master Mix (2x) Universal is superior to the other tested master mixes for studying gene expression in equine gastric biopsies.

Time efficient Gabor fused master slave optical coherence tomography

NASA Astrophysics Data System (ADS)

Cernat, Ramona; Bradu, Adrian; Rivet, Sylvain; Podoleanu, Adrian

2018-02-01

In this paper the benefits in terms of operation time that Master/Slave (MS) implementation of optical coherence tomography can bring in comparison to Gabor fused (GF) employing conventional fast Fourier transform based OCT are presented. The Gabor Fusion/Master Slave Optical Coherence Tomography architecture proposed here does not need any data stitching. Instead, a subset of en-face images is produced for each focus position inside the sample to be imaged, using a reduced number of theoretically inferred Master masks. These en-face images are then assembled into a final volume. When the channelled spectra are digitized into 1024 sampling points, and more than 4 focus positions are required to produce the final volume, the Master Slave implementation of the instrument is faster than the conventional fast Fourier transform based procedure.

Master-slave control scheme in electric vehicle smart charging infrastructure.

PubMed

Chung, Ching-Yen; Chynoweth, Joshua; Chu, Chi-Cheng; Gadh, Rajit

2014-01-01

WINSmartEV is a software based plug-in electric vehicle (PEV) monitoring, control, and management system. It not only incorporates intelligence at every level so that charge scheduling can avoid grid bottlenecks, but it also multiplies the number of PEVs that can be plugged into a single circuit. This paper proposes, designs, and executes many upgrades to WINSmartEV. These upgrades include new hardware that makes the level 1 and level 2 chargers faster, more robust, and more scalable. It includes algorithms that provide a more optimal charge scheduling for the level 2 (EVSE) and an enhanced vehicle monitoring/identification module (VMM) system that can automatically identify PEVs and authorize charging.

Master-Slave Control Scheme in Electric Vehicle Smart Charging Infrastructure

PubMed Central

Chung, Ching-Yen; Chynoweth, Joshua; Chu, Chi-Cheng; Gadh, Rajit

2014-01-01

WINSmartEV is a software based plug-in electric vehicle (PEV) monitoring, control, and management system. It not only incorporates intelligence at every level so that charge scheduling can avoid grid bottlenecks, but it also multiplies the number of PEVs that can be plugged into a single circuit. This paper proposes, designs, and executes many upgrades to WINSmartEV. These upgrades include new hardware that makes the level 1 and level 2 chargers faster, more robust, and more scalable. It includes algorithms that provide a more optimal charge scheduling for the level 2 (EVSE) and an enhanced vehicle monitoring/identification module (VMM) system that can automatically identify PEVs and authorize charging. PMID:24982956

KSC-00pp0143

NASA Image and Video Library

2000-02-01

KENNEDY SPACE CENTER, Fla. -- Cloud cover rolls in behind Space Shuttle Endeavour as the Rotating Service Structure begins rolling back into its protective position on Launch Pad 39A. The launch of Space Shuttle Endeavour on mission STS-99 was delayed when NASA managers decided to replace the Enhanced Master Events Controller that became suspect during the Jan. 31 launch countdown. The next scheduled launch is NET Feb. 9

A-2 Test Stand modification work

NASA Image and Video Library

2010-10-27

John C. Stennis Space Center employees install a new master interface tool on the A-2 Test Stand on Oct. 27, 2010. Until July 2009, the stand had been used for testing space shuttle main engines. With that test series complete, employees are preparing the stand for testing the next-generation J-2X rocket engine being developed. Testing of the new engine is scheduled to begin in 2011.

KSC00pp0143

NASA Image and Video Library

2000-02-01

KENNEDY SPACE CENTER, Fla. -- Cloud cover rolls in behind Space Shuttle Endeavour as the Rotating Service Structure begins rolling back into its protective position on Launch Pad 39A. The launch of Space Shuttle Endeavour on mission STS-99 was delayed when NASA managers decided to replace the Enhanced Master Events Controller that became suspect during the Jan. 31 launch countdown. The next scheduled launch is NET Feb. 9

State of the SOOS GCMD Portal

NASA Technical Reports Server (NTRS)

Ritz, Scott

2018-01-01

A brief status update on NASA’s latest Global Change Master Directory (GCMD) keyword update, description of the differences between DIF-9 and DIF-10 formats in advance of the deprecation of DIF-9 support in Earth Observing System Data and Information System (EOSDIS) with specifics on the DIF-10.3 schema, transition schedule, and some usage metrics for the GCMD Southern Ocean Observing System (SOOS) Portal.

40 CFR 141.702 - Sampling schedules.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Sampling schedules. 141.702 Section... Monitoring Requirements § 141.702 Sampling schedules. (a) Systems required to conduct source water monitoring under § 141.701 must submit a sampling schedule that specifies the calendar dates when the system will...

40 CFR 141.702 - Sampling schedules.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Sampling schedules. 141.702 Section... Monitoring Requirements § 141.702 Sampling schedules. (a) Systems required to conduct source water monitoring under § 141.701 must submit a sampling schedule that specifies the calendar dates when the system will...

7 CFR 43.104 - Master table of single and double sampling plans.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Master table of single and double sampling plans. 43.104 Section 43.104 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND...

Assessing new patient access to mental health providers in HMO networks.

PubMed

Barry, Colleen L; Venkatesh, Mohini; Busch, Susan H

2008-12-01

This study examined access to mental health providers in health maintenance organization (HMO) networks. A telephone survey was conducted with a stratified random sample of mental health providers listed as being in a network for at lease one of six HMOs operating in Connecticut (response rate=72%; N=366). Data were collected between December 2006 and March 2007. Measures included the accuracy of network listings, acceptance rates of new patients, and reasons for not accepting new patients. Acceptance of new patients was defined as scheduling an appointment within two weeks from the time of the initial contact. Logistic regression was used to examine acceptance rates of new patients while controlling for type of provider (social worker, nurse, psychologist, or psychiatrist) and practice characteristics. Findings indicate that 17% of sampled HMO network listings were inaccurate. Among the providers with an accurate listing, 73% were accepting new HMO patients and 76% were accepting new self-pay patients. These aggregate acceptance rates of new patients mask differences among providers, with psychiatrists significantly less likely than other providers to accept new patients (55% of psychiatrists were accepting new patients). The most common reason for not accepting new patients was the lack of available appointments. Results indicate that access to mental health providers in HMO networks varied by type of provider. For HMO enrollees seeking treatment for mental health problems from a provider with a master's degree in social work (M.S.W. degree), network access was not a major problem. Scheduling an appointment with a psychiatrist, particularly a psychiatrist treating children only, was more difficult.

Defense Acquisition Review Journal. Volume 14, Number 1, February 2007

DTIC Science & Technology

2007-02-01

price, delivery schedules, or policies, such as the Berry Amendment Specialty Metals Clause,3 Critical Safety Items (CSI),4 and Business System Status...management, quality assurance, client care and subcontractor management. Ms. Shaw holds a BS in Business from University of Baltimore and a masters in...William Kleiner Matthew Popham A Business Model for Defense Acquisition under the Modular Open Systems Approach Eugene Gholz Decision Support for Best

Tsukuba 32-m VLBI Station

NASA Technical Reports Server (NTRS)

Kawabata, Ryoji; Kurihara, Shinobu; Fukuzaki, Yoshihiro; Kuroda, Jiro; Tanabe, Tadashi; Mukai, Yasuko; Nishikawa, Takashi

2013-01-01

The Tsukuba 32-m VLBI station is operated by the Geospatial Information Authority of Japan. This report summarizes activities of the Tsukuba 32-m VLBI station in 2012. More than 200 sessions were observed with the Tsukuba 32-m and other GSI antennas in accordance with the IVS Master Schedule of 2012. We have started installing the observing facilities that will be fully compliant with VLBI2010 for the first time in Japan.

Gigabit Network Communications Research

DTIC Science & Technology

1992-12-31

additional BPF channels, raw bytesync support for video codecs, and others. All source file modifications were logged with RCS. Source and object trees were...34 (RFCs). 20 RFCs were published this quarter: RFC 1366: Gerich, E., " Guidelines for Management of IP Address Space", Merit, October 1992. RFC 1367...Topolcic, C., "Schedule for IP Address Space Management Guidelines ", CNRI, October 1992. RFC 1368: McMaster, D. (Synoptics Communications, Inc.), K

Rapid Prototype Development of a Remotely-Piloted Aircraft Powered by a Hybrid-Electric Propulsion System

DTIC Science & Technology

2012-03-01

ch1) IED Improvised Explosive Device (ch1) IMS Integrated Master Schedule (ch3) ISR Intelligence Surveillance Reconnaissance (ch1...including the locating, monitoring, and neutralizing of enemy combatants, identification of and detonation of improvised explosive devices (IED...typically high altitude) necessitating the use of costly optics and sensors for ISR data collection. These features preclude long endurance RPAs from being

Scheduling elective surgeries: the tradeoff among bed capacity, waiting patients and operating room utilization using goal programming.

PubMed

Li, Xiangyong; Rafaliya, N; Baki, M Fazle; Chaouch, Ben A

2017-03-01

Scheduling of surgeries in the operating rooms under limited competing resources such as surgical and nursing staff, anesthesiologist, medical equipment, and recovery beds in surgical wards is a complicated process. A well-designed schedule should be concerned with the welfare of the entire system by allocating the available resources in an efficient and effective manner. In this paper, we develop an integer linear programming model in a manner useful for multiple goals for optimally scheduling elective surgeries based on the availability of surgeons and operating rooms over a time horizon. In particular, the model is concerned with the minimization of the following important goals: (1) the anticipated number of patients waiting for service; (2) the underutilization of operating room time; (3) the maximum expected number of patients in the recovery unit; and (4) the expected range (the difference between maximum and minimum expected number) of patients in the recovery unit. We develop two goal programming (GP) models: lexicographic GP model and weighted GP model. The lexicographic GP model schedules operating rooms when various preemptive priority levels are given to these four goals. A numerical study is conducted to illustrate the optimal master-surgery schedule obtained from the models. The numerical results demonstrate that when the available number of surgeons and operating rooms is known without error over the planning horizon, the proposed models can produce good schedules and priority levels and preference weights of four goals affect the resulting schedules. The results quantify the tradeoffs that must take place as the preemptive-weights of the four goals are changed.

Career Oriented Mathematics, Teacher's Manual. [Includes Mastering Computational Skill: A Use-Based Program; Owning an Automobile and Driving as a Career; Retail Sales; Measurement; and Area-Perimeter.

ERIC Educational Resources Information Center

Mahaffey, Michael L.; McKillip, William D.

This manual is designed for teachers using the Career Oriented Mathematics units on owning an automobile and driving as a career, retail sales, measurement, and area-perimeter. The volume begins with a discussion of the philosophy and scheduling of the program which is designed to improve students' attitudes and ability in computation by…

Project Scheduling to Maximize Positive Impacts of Reconstruction Operations

DTIC Science & Technology

2009-03-01

within weak and failing states than by the borders between strong and aggressive ones” [Rice 2005]. 1 [Heldt 2008:11] Figure 1 Trends in Peacekeeping...UNLIMITED. The views expressed in this thesis are those of the author and do not reflect the official policy or position of the United States Air Force...University Air Education and Training Command in Partial Fulfillment of the Requirements for the Degree of Master of Science in Operations Research

International Acquisition Programs: Variables Beyond Cost, Schedule and Performance

DTIC Science & Technology

2015-02-17

Academy with a Bachelor of Science Degree in Human Factors Engineering and a Masters of Operational Art and Science from Air Command and Staff...Lt Col, USAF A Research Report Submitted to the Faculty In Partial Fulfillment of the Graduation Requirements Advisor: Col Kenneth Tatum 17...5c. PROGRAM ELEMENT NUMBER 6. AUTHOR( S ) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME( S ) AND ADDRESS

The 30/20 GHz flight experiment system, phase 2. Volume 4: Experiment system development plan

NASA Technical Reports Server (NTRS)

Bronstein, L.; Kawamoto, Y.; Riberich, J. J.; Scope, J. R.; Forman, B. J.; Bergman, S. G.; Reisenfeld, S.

1981-01-01

The development plan for the 30/20 GHz flight experiment system is presented. A master program schedule with detailed development plans for each subsystem is planned with careful attention given to how technology items to ensure a minimal risk. The work breakdown structure shows the organization of the program management with detailed task definitions. The ROM costs based on the development plan are also given.

Navy Ford (CVN-78) Class Aircraft Carrier Program: Background and Issues for Congress

DTIC Science & Technology

2016-03-08

limited. Yet, it is not too late to examine the carrier’s acquisition history to illustrate the dynamics of shipbuilding—and weapon system—acquisition...rates and the investments needed by the shipbuilder to achieve these efficiencies.31 Later in the hearing, Stackley testified that the history in...for all work packages in accordance with the integrated master schedule;  zero delinquent engineering and planning products;  resolution of

Malpractice Insurance Requirements in Counselor Education Master's Degree Programs: A Survey.

ERIC Educational Resources Information Center

Hastings, Paul B.; D'Aboy, Kari Hansen

To determine what percentage of master's level graduate programs in counselor education recommend or require the purchase of malpractice insurance for their students, a 20 percent random sample of 287 master's level counselor education programs, listed in "Graduate Study in Psychology, 1982-83," were surveyed. The return rate was 80 percent (N=46…

Comparison between McMaster and Mini-FLOTAC methods for the enumeration of Eimeria maxima oocysts in poultry excreta.

PubMed

Bortoluzzi, C; Paras, K L; Applegate, T J; Verocai, G G

2018-04-30

Monitoring Eimeria shedding has become more important due to the recent restrictions to the use of antibiotics within the poultry industry. Therefore, there is a need for the implementation of more precise and accurate quantitative diagnostic techniques. The objective of this study was to compare the precision and accuracy between the Mini-FLOTAC and the McMaster techniques for quantitative diagnosis of Eimeria maxima oocyst in poultry. Twelve pools of excreta samples of broiler chickens experimentally infected with E. maxima were analyzed for the comparison between Mini-FLOTAC and McMaster technique using, the detection limits (dl) of 23 and 25, respectively. Additionally, six excreta samples were used to compare the precision of different dl (5, 10, 23, and 46) using the Mini-FLOTAC technique. For precision comparisons, five technical replicates of each sample (five replicate slides on one excreta slurry) were read for calculating the mean oocyst per gram of excreta (OPG) count, standard deviation (SD), coefficient of variation (CV), and precision of both aforementioned comparisons. To compare accuracy between the methods (McMaster, and Mini-FLOTAC dl 5 and 23), excreta from uninfected chickens was spiked with 100, 500, 1,000, 5,000, or 10,000 OPG; additional samples remained unspiked (negative control). For each spiking level, three samples were read in triplicate, totaling nine reads per spiking level per technique. Data were transformed using log10 to obtain normality and homogeneity of variances. A significant correlation (R = 0.74; p = 0.006) was observed between the mean OPG of the McMaster dl 25 and the Mini-FLOTAC dl 23. Mean OPG, CV, SD, and precision were not statistically different between the McMaster dl 25 and Mini-FLOTAC dl 23. Despite the absence of statistical difference (p > 0.05), Mini-FLOTAC dl 5 showed a numerically lower SD and CV than Mini-FLOTAC dl 23. The Pearson correlation coefficient revealed significant and positive correlation among the four dl (p ≤ 0.05). In the accuracy study, it was observed that the Mini-FLOTAC dl 5 and 23 were more accurate than the McMaster for 100 OPG, and the Mini-FLOTAC dl 23 had the highest accuracy for 500 OPG. The McMaster and Mini-FLOTAC dl 23 techniques were more accurate than the Mini-FLOTAC dl 5 for 5,000 OPG, and both dl of the Mini-FLOTAC were less accurate for 10,000 OPG counts than the McMaster technique. However, the overall accuracy of the Mini-FLOTAC dl 23 was higher than the McMaster and Mini-FLOTAC dl 5 techniques. Copyright © 2018 Elsevier B.V. All rights reserved.

Publishing a master's thesis: a guide for novice authors.

PubMed

Resta, Robert G; McCarthy Veach, Patricia; Charles, Sarah; Vogel, Kristen; Blase, Terri; Palmer, Christina G S

2010-06-01

Publication of original research, clinical experiences, and critical reviews of literature are vital to the growth of the genetic counseling field, delivery of genetic counseling services, and professional development of genetic counselors. Busy clinical schedules, lack of time and funding, and training that emphasizes clinical skills over research skills may make it difficult for new genetic counselors to turn their thesis projects into publications. This paper summarizes and elaborates upon a presentation aimed at de-mystifying the publishing process given at the 2008 National Society of Genetic Counselors Annual Education Conference. Specific topics include familiarizing prospective authors, particularly genetic counseling students, with the basics of the publication process and related ethical considerations. Former students' experiences with publishing master's theses also are described in hopes of encouraging new genetic counselors to submit for publication papers based on their thesis projects.

9 CFR 113.64 - General requirements for live bacterial vaccines.

Code of Federal Regulations, 2010 CFR

2010-01-01

... completed product from each serial and subserial, and samples of each lot of Master Seed Bacteria shall be tested for the presence of extraneous viable bacteria and fungi in accordance with the test provided in... samples of each lot of Master Seed Bacteria shall be tested for safety in young adult mice in accordance...

9 CFR 113.64 - General requirements for live bacterial vaccines.

Code of Federal Regulations, 2011 CFR

2011-01-01

... completed product from each serial and subserial, and samples of each lot of Master Seed Bacteria shall be tested for the presence of extraneous viable bacteria and fungi in accordance with the test provided in... samples of each lot of Master Seed Bacteria shall be tested for safety in young adult mice in accordance...

Modeling Code Is Helping Cleveland Develop New Products

NASA Technical Reports Server (NTRS)

1998-01-01

Master Builders, Inc., is a 350-person company in Cleveland, Ohio, that develops and markets specialty chemicals for the construction industry. Developing new products involves creating many potential samples and running numerous tests to characterize the samples' performance. Company engineers enlisted NASA's help to replace cumbersome physical testing with computer modeling of the samples' behavior. Since the NASA Lewis Research Center's Structures Division develops mathematical models and associated computation tools to analyze the deformation and failure of composite materials, its researchers began a two-phase effort to modify Lewis' Integrated Composite Analyzer (ICAN) software for Master Builders' use. Phase I has been completed, and Master Builders is pleased with the results. The company is now working to begin implementation of Phase II.

Analysis of the accuracy and precision of the McMaster method in detection of the eggs of Toxocara and Trichuris species (Nematoda) in dog faeces.

PubMed

Kochanowski, Maciej; Dabrowska, Joanna; Karamon, Jacek; Cencek, Tomasz; Osiński, Zbigniew

2013-07-01

The aim of this study was to determine the accuracy and precision of McMaster method with Raynaud's modification in the detection of the eggs of the nematodes Toxocara canis (Werner, 1782) and Trichuris ovis (Abildgaard, 1795) in faeces of dogs. Four variants of McMaster method were used for counting: in one grid, two grids, the whole McMaster chamber and flotation in the tube. One hundred sixty samples were prepared from dog faeces (20 repetitions for each egg quantity) containing 15, 25, 50, 100, 150, 200, 250 and 300 eggs of T. canis and T. ovis in 1 g of faeces. To compare the influence of kind of faeces on the results, samples of dog faeces were enriched at the same levels with the eggs of another nematode, Ascaris suum Goeze, 1782. In addition, 160 samples of pig faeces were prepared and enriched only with A. suum eggs in the same way. The highest limit of detection (the lowest level of eggs that were detected in at least 50% of repetitions) in all McMaster chamber variants were obtained for T. canis eggs (25-250 eggs/g faeces). In the variant with flotation in the tube, the highest limit of detection was obtained for T. ovis eggs (100 eggs/g). The best results of the limit of detection, sensitivity and the lowest coefficients of variation were obtained with the use of the whole McMaster chamber variant. There was no significant impact of properties of faeces on the obtained results. Multiplication factors for the whole chamber were calculated on the basis of the transformed equation of the regression line, illustrating the relationship between the number of detected eggs and that of the eggs added to the'sample. Multiplication factors calculated for T. canis and T. ovis eggs were higher than those expected using McMaster method with Raynaud modification.

DuPont Qualicon BAX System polymerase chain reaction assay. Performance Tested Method 100201.

PubMed

Tice, George; Andaloro, Bridget; Fallon, Dawn; Wallace, F Morgan

2009-01-01

A recent outbreak of Salmonella in peanut butter has highlighted the need for validation of rapid detection methods. A multilaboratory study for detecting Salmonella in peanut butter was conducted as part of the AOAC Research Institute Emergency Response Validation program for methods that detect outbreak threats to food safety. Three sites tested spiked samples from the same master mix according to the U.S. Food and Drug Administration's Bacteriological Analytical Manual (FDA-BAM) method and the BAX System method. Salmonella Typhimurium (ATCC 14028) was grown in brain heart infusion for 24 h at 37 degrees C, then diluted to appropriate levels for sample inoculation. Master samples of peanut butter were spiked at high and low target levels, mixed, and allowed to equilibrate at room temperature for 2 weeks. Spike levels were low [1.08 most probable number (MPN)/25 g]; high (11.5 MPN/25 g) and unspiked to serve as negative controls. Each master sample was divided into 25 g portions and coded to blind the samples. Twenty portions of each spiked master sample and five portions of the unspiked sample were tested at each site. At each testing site, samples were blended in 25 g portions with 225 mL prewarmed lactose broth until thoroughly homogenized, then allowed to remain at room temperature for 55-65 min. Samples were adjusted to a pH of 6.8 +/- 0.2, if necessary, and incubated for 22-26 h at 35 degrees C. Across the three reporting laboratories, the BAX System detected Salmonella in 10/60 low-spike samples and 58/60 high-spike samples. The reference FDA-BAM method yielded positive results for 11/60 low-spike and 58/60 high-spike samples. Neither method demonstrated positive results for any of the 15 unspiked samples.

Conceptual Design of an In-Space Cryogenic Fluid Management Facility

NASA Technical Reports Server (NTRS)

Willen, G. S.; Riemer, D. H.; Hustvedt, D. C.

1981-01-01

The conceptual design of a Spacelab experiment to develop the technology associated with low gravity propellant management is presented. The proposed facility consisting of a supply tank, receiver tank, pressurization system, instrumentation, and supporting hardware, is described. The experimental objectives, the receiver tank to be modeled, and constraints imposed on the design by the space shuttle, Spacelab, and scaling requirements, are described. The conceptual design, including the general configurations, flow schematics, insulation systems, instrumentation requirements, and internal tank configurations for the supply tank and the receiver tank, is described. Thermal, structural, fluid, and safety and reliability aspects of the facility are analyzed. The facility development plan, including schedule and cost estimates for the facility, is presented. A program work breakdown structure and master program schedule for a seven year program are included.

Postbaccalaureate Salaries of Psychology Majors from a Historically Black University: How Much Does a Master's Degree Add?

ERIC Educational Resources Information Center

Sibulkin, Amy E.; Butler, J. S.

2016-01-01

A sample of predominantly African American psychology major baccalaureates from a historically Black university self-reported job types, salaries, and master's degree completion. For this pre-2009 recession sample, we found that (a) the rates of employment were quite high; (b) most jobs were related to health, mental health, social work, and…

United States Air Force Computer-Aided Acquisition and Logistics Support (CALS) Evolution of Computer Integrated Manufacturing (CIM) Technologies

DTIC Science & Technology

1988-11-01

Manufacturing System 22 4. Similar Parts Based Shape or Manufactuting Process 24 5. Projected Annual Unit Robot Sales and Installed Base Through 1992 30 6. U.S...effort needed to perform personnel, product design, marketing , and advertising, and finance tasks of the firm. Level III controls the resource...planning and accounting functions of the firm. Systems at this level support purchasing, accounts payable, accounts receivable, master scheduling and sales

An Assessment of Software Safety as Applied to the Department of Defense Software Development Process

DTIC Science & Technology

1992-12-01

provide program 5 managers some level of confidence that their software will operate at an acceptable level of risk. A number of structured safety...safety within the constraints of operational effectiveness, schedule, and cost through timely application of system safety management and engineering...Master of Science in Software Systems Management Peter W. Colan, B.S.E. Robert W. Prouhet, B.S. Captain, USAF Captain, USAF December 1992 Approved for

THE EFFECTS OF FIXED VERSUS ESCALATING REINFORCEMENT SCHEDULES ON SMOKING ABSTINENCE

PubMed Central

Romanowich, Paul; Lamb, R. J.

2015-01-01

Studies indicate that when abstinence is initiated, escalating reinforcement schedules maintain continuous abstinence longer than fixed reinforcement schedules. However, these studies were conducted for shorter durations than most clinical trials and also resulted in larger reinforcer value for escalating participants during the 1st week of the experiment. We tested whether escalating reinforcement schedules maintained abstinence longer than fixed reinforcement schedules in a 12-week clinical trial. Smokers (146) were randomized to an escalating reinforcement schedule, a fixed reinforcement schedule, or a control condition. Escalating reinforcement participants received $5.00 for their first breath carbon monoxide (CO) sample <3 ppm, with a $0.50 increase for each consecutive sample. Fixed reinforcement participants received $19.75 for each breath CO sample <3 ppm. Control participants received payments only for delivering a breath CO sample. Similar proportions of escalating and fixed reinforcement participants met the breath CO criterion at least once. Escalating reinforcement participants maintained criterion breath CO levels longer than fixed reinforcement and control participants. Similar to previous short-term studies, escalating reinforcement schedules maintained longer durations of abstinence than fixed reinforcement schedules during a clinical trial. PMID:25640764

Investigation of the History Education Researches in Turkey in Terms of Some Variables (Master's Theses and Dissertations Sample)

ERIC Educational Resources Information Center

Elban, Mehmet

2017-01-01

The purpose of this research study is to examine the master's theses and dissertations carried out about history education research in Turkey in terms of certain variables. The study is a qualitative research and it used documentary research design as a research method. The population of the research study is the master's theses and dissertations…

Attitudes toward Master's and Clinical Doctorate Degrees in Physical Therapy

PubMed Central

Mistry, Yamini; Francis, Christian; Haldane, Jessica; Symonds, Scott; Uguccioni, Erika; Berg, Katherine

2014-01-01

ABSTRACT Purpose: To examine the attitudes of a self-selected sample of Canadian physical therapists toward the transition from bachelor's to master's degrees and the implementation of clinical doctorate degrees in physical therapy (PT). Methods: A cross-sectional survey was conducted using a modified Dillman tailored approach. All eligible members of the Canadian Physiotherapy Association (CPA) were invited to participate. Results: Of 1,397 Canadian physical therapists who responded to the survey, 45% favoured the transition from bachelor's to master's degrees, 21% did not, and 34% were neutral; 27% favoured a transition from a master's to a doctoral degree for entry into practice in PT, 53% did not favour this transition, and 20% were neutral. Finally, 56% favoured the implementation of a post-professional clinical doctorate (PPCD) in PT, 23% did not, and 21% were neutral. Conclusions: Overall, a self-selected sample of Canadian physical therapists supported the future implementation of a post-professional clinical doctorate degree in PT but did not support an entry-to-practice doctoral degree. However, these results must be interpreted with caution because of the study's small sample size. PMID:25922561

Field Validity and Feasibility of Four Techniques for the Detection of Trichuris in Simians: A Model for Monitoring Drug Efficacy in Public Health?

PubMed Central

Levecke, Bruno; De Wilde, Nathalie; Vandenhoute, Els; Vercruysse, Jozef

2009-01-01

Background Soil-transmitted helminths, such as Trichuris trichiura, are of major concern in public health. Current efforts to control these helminth infections involve periodic mass treatment in endemic areas. Since these large-scale interventions are likely to intensify, monitoring the drug efficacy will become indispensible. However, studies comparing detection techniques based on sensitivity, fecal egg counts (FEC), feasibility for mass diagnosis and drug efficacy estimates are scarce. Methodology/Principal Findings In the present study, the ether-based concentration, the Parasep Solvent Free (SF), the McMaster and the FLOTAC techniques were compared based on both validity and feasibility for the detection of Trichuris eggs in 100 fecal samples of nonhuman primates. In addition, the drug efficacy estimates of quantitative techniques was examined using a statistical simulation. Trichuris eggs were found in 47% of the samples. FLOTAC was the most sensitive technique (100%), followed by the Parasep SF (83.0% [95% confidence interval (CI): 82.4–83.6%]) and the ether-based concentration technique (76.6% [95% CI: 75.8–77.3%]). McMaster was the least sensitive (61.7% [95% CI: 60.7–62.6%]) and failed to detect low FEC. The quantitative comparison revealed a positive correlation between the four techniques (Rs = 0.85–0.93; p<0.0001). However, the ether-based concentration technique and the Parasep SF detected significantly fewer eggs than both the McMaster and the FLOTAC (p<0.0083). Overall, the McMaster was the most feasible technique (3.9 min/sample for preparing, reading and cleaning of the apparatus), followed by the ether-based concentration technique (7.7 min/sample) and the FLOTAC (9.8 min/sample). Parasep SF was the least feasible (17.7 min/sample). The simulation revealed that the sensitivity is less important for monitoring drug efficacy and that both FLOTAC and McMaster were reliable estimators. Conclusions/Significance The results of this study demonstrated that McMaster is a promising technique when making use of FEC to monitor drug efficacy in Trichuris. PMID:19172171

[A bit of business administration--no problem for physicians: Master of Business Administration as panacea?].

PubMed

Tecklenburg, A; Liebeneiner, J

2010-08-01

Medical professionals with additional economic qualifications are in high demand. For doctors who aim for leading positions at medical institutions the most popular additional qualification is a Master of Business Administration (MBA). The demands on executive managers in hospitals have without any doubt changed in recent years requiring them to be trained in basic economic understanding, human resource management etc. in addition to having excellent medical training. However, MBA programs differ from one academic institution to the next. Due to the lack of standardized schedules in MBA programs it cannot be ascertained whether a candidate received adequate training and can offer the skills necessary for a higher level medical profession. In this paper the author suggests that specific training in individually required skills would be more reasonable and effective rather than encouraging medical staff to pursue academic studies leading to an MBA.

ABC Assay: Method Development and Application to Quantify the Role of Three DWV Master Variants in Overwinter Colony Losses of European Honey Bees.

PubMed

Kevill, Jessica L; Highfield, Andrea; Mordecai, Gideon J; Martin, Stephen J; Schroeder, Declan C

2017-10-27

Deformed wing virus (DWV) is one of the most prevalent honey bee viral pathogens in the world. Typical of many RNA viruses, DWV is a quasi-species, which is comprised of a large number of different variants, currently consisting of three master variants: Type A, B, and C. Little is known about the impact of each variant or combinations of variants upon the biology of individual hosts. Therefore, we have developed a new set of master variant-specific DWV primers and a set of standards that allow for the quantification of each of the master variants. Competitive reverse transcriptase polymerase chain reaction (RT-PCR) experimental design confirms that each new DWV primer set is specific to the retrospective master variant. The sensitivity of the ABC assay is dependent on whether DNA or RNA is used as the template and whether other master variants are present in the sample. Comparison of the overall proportions of each master variant within a sample of known diversity, as confirmed by next-generation sequence (NGS) data, validates the efficiency of the ABC assay. The ABC assay was used on archived material from a Devon overwintering colony loss (OCL) 2006-2007 study; further implicating DWV type A and, for the first time, possibly C in the untimely collapse of honey bee colonies. Moreover, in this study DWV type B was not associated with OCL. The use of the ABC assay will allow researchers to quickly and cost effectively pre-screen for the presence of DWV master variants in honey bees.

Dogmatism, Locus of Control, Perceived Counselor Self-Efficacy, and the Theoretical Orientation of Students in a Master's Level Counseling Practicum

ERIC Educational Resources Information Center

Benesh, Andrew Christopher

2017-01-01

Purpose: The purpose of this study was to fill a gap in the literature by examining the relationship between dogmatism, locus of control, counselor self-efficacy, and counselor theoretical orientation in a sample of master's level practicum students. Method: A total of 45 master's practicum students completed a series of four instruments, the DOG…

Automation and Agitation: Today's Junior College Student--D.N.F.S.M.B.* (*Do Not Fold, Spindle, Mutilate, or Bend); Conference for Chief Administrators of Student Personnel (Pacific Grove, California, January 10-12, 1968).

ERIC Educational Resources Information Center

California Junior Coll. Association, Sacramento. Committee on Guidance and Student Personnel.

After a keynote speech on how the dean of students can help bridge the gap between students and the trustees, legislators, and the supporting community, the conferees discussed automated registration--how to provide it with an acceptable master schedule, its many advantages, and a few problems. As for student activism, understanding must work both…

Simulators for Mariner Training and Licensing. Phase 2: Investigation of Simulator-Based Training for Maritime Cadets,

DTIC Science & Technology

1981-10-01

a balance was drawn between experimental considerations (e.g., pretests and posttests ) and training process considerations (e.g., available time and...Station 23 4 Instructor’s Checkoff List 24 5 Port Approach Area 26 6 Training Unit Schedule 28 7 Pretest / Posttest Comparison: CPA - Kings Point Group A (Day...39 a Pretest / Posttest Comparison: Number of Radar Requests - Kings Point Group A (Day) 41 9 Input Characteristic Range Master Notified, Kings Point

Ares I-X Management Office (MMO) Integrated Master Schedule (IMS)

NASA Technical Reports Server (NTRS)

Heintzman, Keith; Askins, Bruce

2010-01-01

Objectives: Demonstrate control of a dynamically similar, integrated Ares I/Orion, using Ares I relevant ascent control algorithms. Perform an in-flight separation/staging event between a Ares I-similar First Stage and a representative Upper Stage. Demonstrate assembly and recovery of a new Ares I-like First Stage element at KSC. Demonstrate First Stage separation sequencing, and quantify First Stage atmospheric entry dynamics, and parachute performance. Characterize magnitude of integrated vehicle roll torque throughout First Stage flight.

Optimal sampling designs for estimation of Plasmodium falciparum clearance rates in patients treated with artemisinin derivatives

PubMed Central

2013-01-01

Background The emergence of Plasmodium falciparum resistance to artemisinins in Southeast Asia threatens the control of malaria worldwide. The pharmacodynamic hallmark of artemisinin derivatives is rapid parasite clearance (a short parasite half-life), therefore, the in vivo phenotype of slow clearance defines the reduced susceptibility to the drug. Measurement of parasite counts every six hours during the first three days after treatment have been recommended to measure the parasite clearance half-life, but it remains unclear whether simpler sampling intervals and frequencies might also be sufficient to reliably estimate this parameter. Methods A total of 2,746 parasite density-time profiles were selected from 13 clinical trials in Thailand, Cambodia, Mali, Vietnam, and Kenya. In these studies, parasite densities were measured every six hours until negative after treatment with an artemisinin derivative (alone or in combination with a partner drug). The WWARN Parasite Clearance Estimator (PCE) tool was used to estimate “reference” half-lives from these six-hourly measurements. The effect of four alternative sampling schedules on half-life estimation was investigated, and compared to the reference half-life (time zero, 6, 12, 24 (A1); zero, 6, 18, 24 (A2); zero, 12, 18, 24 (A3) or zero, 12, 24 (A4) hours and then every 12 hours). Statistical bootstrap methods were used to estimate the sampling distribution of half-lives for parasite populations with different geometric mean half-lives. A simulation study was performed to investigate a suite of 16 potential alternative schedules and half-life estimates generated by each of the schedules were compared to the “true” half-life. The candidate schedules in the simulation study included (among others) six-hourly sampling, schedule A1, schedule A4, and a convenience sampling schedule at six, seven, 24, 25, 48 and 49 hours. Results The median (range) parasite half-life for all clinical studies combined was 3.1 (0.7-12.9) hours. Schedule A1 consistently performed the best, and schedule A4 the worst, both for the individual patient estimates and for the populations generated with the bootstrapping algorithm. In both cases, the differences between the reference and alternative schedules decreased as half-life increased. In the simulation study, 24-hourly sampling performed the worst, and six-hourly sampling the best. The simulation study confirmed that more dense parasite sampling schedules are required to accurately estimate half-life for profiles with short half-life (≤three hours) and/or low initial parasite density (≤10,000 per μL). Among schedules in the simulation study with six or fewer measurements in the first 48 hours, a schedule with measurements at times (time windows) of 0 (0–2), 6 (4–8), 12 (10–14), 24 (22–26), 36 (34–36) and 48 (46–50) hours, or at times 6, 7 (two samples in time window 5–8), 24, 25 (two samples during time 23–26), and 48, 49 (two samples during time 47–50) hours, until negative most accurately estimated the “true” half-life. For a given schedule, continuing sampling after two days had little effect on the estimation of half-life, provided that adequate sampling was performed in the first two days and the half-life was less than three hours. If the measured parasitaemia at two days exceeded 1,000 per μL, continued sampling for at least once a day was needed for accurate half-life estimates. Conclusions This study has revealed important insights on sampling schedules for accurate and reliable estimation of Plasmodium falciparum half-life following treatment with an artemisinin derivative (alone or in combination with a partner drug). Accurate measurement of short half-lives (rapid clearance) requires more dense sampling schedules (with more than twice daily sampling). A more intensive sampling schedule is, therefore, recommended in locations where P. falciparum susceptibility to artemisinins is not known and the necessary resources are available. Counting parasite density at six hours is important, and less frequent sampling is satisfactory for estimating long parasite half-lives in areas where artemisinin resistance is present. PMID:24225303

Optimal sampling designs for estimation of Plasmodium falciparum clearance rates in patients treated with artemisinin derivatives.

PubMed

Flegg, Jennifer A; Guérin, Philippe J; Nosten, Francois; Ashley, Elizabeth A; Phyo, Aung Pyae; Dondorp, Arjen M; Fairhurst, Rick M; Socheat, Duong; Borrmann, Steffen; Björkman, Anders; Mårtensson, Andreas; Mayxay, Mayfong; Newton, Paul N; Bethell, Delia; Se, Youry; Noedl, Harald; Diakite, Mahamadou; Djimde, Abdoulaye A; Hien, Tran T; White, Nicholas J; Stepniewska, Kasia

2013-11-13

The emergence of Plasmodium falciparum resistance to artemisinins in Southeast Asia threatens the control of malaria worldwide. The pharmacodynamic hallmark of artemisinin derivatives is rapid parasite clearance (a short parasite half-life), therefore, the in vivo phenotype of slow clearance defines the reduced susceptibility to the drug. Measurement of parasite counts every six hours during the first three days after treatment have been recommended to measure the parasite clearance half-life, but it remains unclear whether simpler sampling intervals and frequencies might also be sufficient to reliably estimate this parameter. A total of 2,746 parasite density-time profiles were selected from 13 clinical trials in Thailand, Cambodia, Mali, Vietnam, and Kenya. In these studies, parasite densities were measured every six hours until negative after treatment with an artemisinin derivative (alone or in combination with a partner drug). The WWARN Parasite Clearance Estimator (PCE) tool was used to estimate "reference" half-lives from these six-hourly measurements. The effect of four alternative sampling schedules on half-life estimation was investigated, and compared to the reference half-life (time zero, 6, 12, 24 (A1); zero, 6, 18, 24 (A2); zero, 12, 18, 24 (A3) or zero, 12, 24 (A4) hours and then every 12 hours). Statistical bootstrap methods were used to estimate the sampling distribution of half-lives for parasite populations with different geometric mean half-lives. A simulation study was performed to investigate a suite of 16 potential alternative schedules and half-life estimates generated by each of the schedules were compared to the "true" half-life. The candidate schedules in the simulation study included (among others) six-hourly sampling, schedule A1, schedule A4, and a convenience sampling schedule at six, seven, 24, 25, 48 and 49 hours. The median (range) parasite half-life for all clinical studies combined was 3.1 (0.7-12.9) hours. Schedule A1 consistently performed the best, and schedule A4 the worst, both for the individual patient estimates and for the populations generated with the bootstrapping algorithm. In both cases, the differences between the reference and alternative schedules decreased as half-life increased. In the simulation study, 24-hourly sampling performed the worst, and six-hourly sampling the best. The simulation study confirmed that more dense parasite sampling schedules are required to accurately estimate half-life for profiles with short half-life (≤ three hours) and/or low initial parasite density (≤ 10,000 per μL). Among schedules in the simulation study with six or fewer measurements in the first 48 hours, a schedule with measurements at times (time windows) of 0 (0-2), 6 (4-8), 12 (10-14), 24 (22-26), 36 (34-36) and 48 (46-50) hours, or at times 6, 7 (two samples in time window 5-8), 24, 25 (two samples during time 23-26), and 48, 49 (two samples during time 47-50) hours, until negative most accurately estimated the "true" half-life. For a given schedule, continuing sampling after two days had little effect on the estimation of half-life, provided that adequate sampling was performed in the first two days and the half-life was less than three hours. If the measured parasitaemia at two days exceeded 1,000 per μL, continued sampling for at least once a day was needed for accurate half-life estimates. This study has revealed important insights on sampling schedules for accurate and reliable estimation of Plasmodium falciparum half-life following treatment with an artemisinin derivative (alone or in combination with a partner drug). Accurate measurement of short half-lives (rapid clearance) requires more dense sampling schedules (with more than twice daily sampling). A more intensive sampling schedule is, therefore, recommended in locations where P. falciparum susceptibility to artemisinins is not known and the necessary resources are available. Counting parasite density at six hours is important, and less frequent sampling is satisfactory for estimating long parasite half-lives in areas where artemisinin resistance is present.

A polymeric master replication technology for mass fabrication of poly(dimethylsiloxane) microfluidic devices.

PubMed

Li, Hai-Fang; Lin, Jin-Ming; Su, Rong-Guo; Cai, Zong Wei; Uchiyama, Katsumi

2005-05-01

A protocol of producing multiple polymeric masters from an original glass master mold has been developed, which enables the production of multiple poly(dimethylsiloxane) (PDMS)-based microfluidic devices in a low-cost and efficient manner. Standard wet-etching techniques were used to fabricate an original glass master with negative features, from which more than 50 polymethylmethacrylate (PMMA) positive replica masters were rapidly created using the thermal printing technique. The time to replicate each PMMA master was as short as 20 min. The PMMA replica masters have excellent structural features and could be used to cast PDMS devices for many times. An integration geometry designed for laser-induced fluorescence (LIF) detection, which contains normal deep microfluidic channels and a much deeper optical fiber channel, was successfully transferred into PDMS devices. The positive relief on seven PMMA replica masters is replicated with regard to the negative original glass master, with a depth average variation of 0.89% for 26-microm deep microfluidic channels and 1.16% for the 90 mum deep fiber channel. The imprinted positive relief in PMMA from master-to-master is reproducible with relative standard deviations (RSDs) of 1.06% for the maximum width and 0.46% for depth in terms of the separation channel. The PDMS devices fabricated from the PMMA replica masters were characterized and applied to the separation of a fluorescein isothiocyanate (FITC)-labeled epinephrine sample.

ABC Assay: Method Development and Application to Quantify the Role of Three DWV Master Variants in Overwinter Colony Losses of European Honey Bees

PubMed Central

Kevill, Jessica L.; Highfield, Andrea; Mordecai, Gideon J.; Schroeder, Declan C.

2017-01-01

Deformed wing virus (DWV) is one of the most prevalent honey bee viral pathogens in the world. Typical of many RNA viruses, DWV is a quasi-species, which is comprised of a large number of different variants, currently consisting of three master variants: Type A, B, and C. Little is known about the impact of each variant or combinations of variants upon the biology of individual hosts. Therefore, we have developed a new set of master variant-specific DWV primers and a set of standards that allow for the quantification of each of the master variants. Competitive reverse transcriptase polymerase chain reaction (RT-PCR) experimental design confirms that each new DWV primer set is specific to the retrospective master variant. The sensitivity of the ABC assay is dependent on whether DNA or RNA is used as the template and whether other master variants are present in the sample. Comparison of the overall proportions of each master variant within a sample of known diversity, as confirmed by next-generation sequence (NGS) data, validates the efficiency of the ABC assay. The ABC assay was used on archived material from a Devon overwintering colony loss (OCL) 2006–2007 study; further implicating DWV type A and, for the first time, possibly C in the untimely collapse of honey bee colonies. Moreover, in this study DWV type B was not associated with OCL. The use of the ABC assay will allow researchers to quickly and cost effectively pre-screen for the presence of DWV master variants in honey bees. PMID:29077069

The contribution of simple random sampling to observed variations in faecal egg counts.

PubMed

Torgerson, Paul R; Paul, Michaela; Lewis, Fraser I

2012-09-10

It has been over 100 years since the classical paper published by Gosset in 1907, under the pseudonym "Student", demonstrated that yeast cells suspended in a fluid and measured by a haemocytometer conformed to a Poisson process. Similarly parasite eggs in a faecal suspension also conform to a Poisson process. Despite this there are common misconceptions how to analyse or interpret observations from the McMaster or similar quantitative parasitic diagnostic techniques, widely used for evaluating parasite eggs in faeces. The McMaster technique can easily be shown from a theoretical perspective to give variable results that inevitably arise from the random distribution of parasite eggs in a well mixed faecal sample. The Poisson processes that lead to this variability are described and illustrative examples of the potentially large confidence intervals that can arise from observed faecal eggs counts that are calculated from the observations on a McMaster slide. Attempts to modify the McMaster technique, or indeed other quantitative techniques, to ensure uniform egg counts are doomed to failure and belie ignorance of Poisson processes. A simple method to immediately identify excess variation/poor sampling from replicate counts is provided. Copyright © 2012 Elsevier B.V. All rights reserved.

Master plans for pedestrian and bicycle transportation: community characteristics.

PubMed

Steinman, Lesley; Doescher, Mark; Levinger, David; Perry, Cynthia; Carter, Louise; Eyler, Amy; Aytur, Semra; Cradock, Angie L I; Evenson, Kelly R; Heinrich, Katie; Kerr, Jacqueline; Litt, Jill; Severcan, Yucel; Voorhees, Carolyn

2010-03-01

Recent research demonstrates the importance of targeting the built environment to support individual physical activity, particularly for people experiencing health disparities. Master plans to promote biking and/or pedestrians (BPMPs) are a potential method for environmental change. This descriptive study aims to provide a snapshot of plan attributes and better understand demographic, social and transportation characteristics of communities with BPMPs. We collected a census sample of BPMPs from 4 states. Population and commuting data were obtained from national statistics. 294 master plans were included, with most plans representing municipalities. 62% of plans targeted biking only, one-fifth targeted biking and walking, and 15% targeted walking only. The sampled locations have a similar demographic profile as the overall U.S. for median age and household income, people of color, high school education, and income inequality. The degree of racial diversity of sampled communities is slightly less than the U.S. average and the percentage of people who walk to work were slightly higher. Given that communities with master plans have a similar profile as the overall U.S., BPMPs could feasibly be spread to communities throughout the country. Further research is planned to describe BPMPs in detail toward informing future plan development.

Nonuniform sampling by quantiles.

PubMed

Craft, D Levi; Sonstrom, Reilly E; Rovnyak, Virginia G; Rovnyak, David

2018-03-01

A flexible strategy for choosing samples nonuniformly from a Nyquist grid using the concept of statistical quantiles is presented for broad classes of NMR experimentation. Quantile-directed scheduling is intuitive and flexible for any weighting function, promotes reproducibility and seed independence, and is generalizable to multiple dimensions. In brief, weighting functions are divided into regions of equal probability, which define the samples to be acquired. Quantile scheduling therefore achieves close adherence to a probability distribution function, thereby minimizing gaps for any given degree of subsampling of the Nyquist grid. A characteristic of quantile scheduling is that one-dimensional, weighted NUS schedules are deterministic, however higher dimensional schedules are similar within a user-specified jittering parameter. To develop unweighted sampling, we investigated the minimum jitter needed to disrupt subharmonic tracts, and show that this criterion can be met in many cases by jittering within 25-50% of the subharmonic gap. For nD-NUS, three supplemental components to choosing samples by quantiles are proposed in this work: (i) forcing the corner samples to ensure sampling to specified maximum values in indirect evolution times, (ii) providing an option to triangular backfill sampling schedules to promote dense/uniform tracts at the beginning of signal evolution periods, and (iii) providing an option to force the edges of nD-NUS schedules to be identical to the 1D quantiles. Quantile-directed scheduling meets the diverse needs of current NUS experimentation, but can also be used for future NUS implementations such as off-grid NUS and more. A computer program implementing these principles (a.k.a. QSched) in 1D- and 2D-NUS is available under the general public license. Copyright © 2018 Elsevier Inc. All rights reserved.

Nonuniform sampling by quantiles

NASA Astrophysics Data System (ADS)

Craft, D. Levi; Sonstrom, Reilly E.; Rovnyak, Virginia G.; Rovnyak, David

2018-03-01

A flexible strategy for choosing samples nonuniformly from a Nyquist grid using the concept of statistical quantiles is presented for broad classes of NMR experimentation. Quantile-directed scheduling is intuitive and flexible for any weighting function, promotes reproducibility and seed independence, and is generalizable to multiple dimensions. In brief, weighting functions are divided into regions of equal probability, which define the samples to be acquired. Quantile scheduling therefore achieves close adherence to a probability distribution function, thereby minimizing gaps for any given degree of subsampling of the Nyquist grid. A characteristic of quantile scheduling is that one-dimensional, weighted NUS schedules are deterministic, however higher dimensional schedules are similar within a user-specified jittering parameter. To develop unweighted sampling, we investigated the minimum jitter needed to disrupt subharmonic tracts, and show that this criterion can be met in many cases by jittering within 25-50% of the subharmonic gap. For nD-NUS, three supplemental components to choosing samples by quantiles are proposed in this work: (i) forcing the corner samples to ensure sampling to specified maximum values in indirect evolution times, (ii) providing an option to triangular backfill sampling schedules to promote dense/uniform tracts at the beginning of signal evolution periods, and (iii) providing an option to force the edges of nD-NUS schedules to be identical to the 1D quantiles. Quantile-directed scheduling meets the diverse needs of current NUS experimentation, but can also be used for future NUS implementations such as off-grid NUS and more. A computer program implementing these principles (a.k.a. QSched) in 1D- and 2D-NUS is available under the general public license.

Evaluation of accuracy and precision of a smartphone based automated parasite egg counting system in comparison to the McMaster and Mini-FLOTAC methods.

PubMed

Scare, J A; Slusarewicz, P; Noel, M L; Wielgus, K M; Nielsen, M K

2017-11-30

Fecal egg counts are emphasized for guiding equine helminth parasite control regimens due to the rise of anthelmintic resistance. This, however, poses further challenges, since egg counting results are prone to issues such as operator dependency, method variability, equipment requirements, and time commitment. The use of image analysis software for performing fecal egg counts is promoted in recent studies to reduce the operator dependency associated with manual counts. In an attempt to remove operator dependency associated with current methods, we developed a diagnostic system that utilizes a smartphone and employs image analysis to generate automated egg counts. The aims of this study were (1) to determine precision of the first smartphone prototype, the modified McMaster and ImageJ; (2) to determine precision, accuracy, sensitivity, and specificity of the second smartphone prototype, the modified McMaster, and Mini-FLOTAC techniques. Repeated counts on fecal samples naturally infected with equine strongyle eggs were performed using each technique to evaluate precision. Triplicate counts on 36 egg count negative samples and 36 samples spiked with strongyle eggs at 5, 50, 500, and 1000 eggs per gram were performed using a second smartphone system prototype, Mini-FLOTAC, and McMaster to determine technique accuracy. Precision across the techniques was evaluated using the coefficient of variation. In regards to the first aim of the study, the McMaster technique performed with significantly less variance than the first smartphone prototype and ImageJ (p<0.0001). The smartphone and ImageJ performed with equal variance. In regards to the second aim of the study, the second smartphone system prototype had significantly better precision than the McMaster (p<0.0001) and Mini-FLOTAC (p<0.0001) methods, and the Mini-FLOTAC was significantly more precise than the McMaster (p=0.0228). Mean accuracies for the Mini-FLOTAC, McMaster, and smartphone system were 64.51%, 21.67%, and 32.53%, respectively. The Mini-FLOTAC was significantly more accurate than the McMaster (p<0.0001) and the smartphone system (p<0.0001), while the smartphone and McMaster counts did not have statistically different accuracies. Overall, the smartphone system compared favorably to manual methods with regards to precision, and reasonably with regards to accuracy. With further refinement, this system could become useful in veterinary practice. Copyright © 2017 Elsevier B.V. All rights reserved.

The Concrete-Representational-Abstract Sequence of Instruction in Mathematics Classrooms

ERIC Educational Resources Information Center

Mudaly, Vimolan; Naidoo, Jayaluxmi

2015-01-01

The purpose of this paper is to explore how master mathematics teachers use the concrete-representational-abstract (CRA) sequence of instruction in mathematics classrooms. Data was collected from a convenience sample of six master teachers by observations, video recordings of their teaching, and semi-structured interviews. Data collection also…

Gas turbine engines and transmissions for bus demonstration programs. Technical status report, 31 October 1979-31 January 1980

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nigro, D.N.

1980-02-01

Progress is reported on the procurement and delivery of 11 Allison GT 404-4 Industrial Gas Turbine Engines and 5 HT740CT and 6 V730CT Allison Automatic Transmissions for the Greyhound and Transit Coaches, respectively. Ceramic regenerators have been incorporated in the build configuration for last 4 Transit Coach engines. The 5 Greyhound Coach engines and the first 2 Transit Coach engines were built in the all-metal configuration. The Master Schedules for the program are presented.

Status of Japanese Experiment Module (JEM) activities

NASA Technical Reports Server (NTRS)

1991-01-01

The current status of the JEM activities are presented in graphic form. The JEM spacecraft configuration is presented. The JEM configuration consist of the Pressurized Module, the Exposed Facility, the Experiment Logistics Module which consist of a pressurized section and an exposed section; and the Remote Manipulator System. The master schedule of the space station is given. Also the development tests of the structure and mechanism, the electrical power system, the data management system, the thermal control system, the environment control system, the experiment support system, and the remote manipulator system are listed.

Predictors of Stress in College Students.

PubMed

Saleh, Dalia; Camart, Nathalie; Romo, Lucia

2017-01-01

University students often face different stressful situations and preoccupations: the first contact with the university, the freedom of schedule organization, the selection of their master's degree, very selective fields, etc. The purpose of this study is to evaluate a model of vulnerability to stress in French college students. Stress factors were evaluated by a battery of six scales that was accessible online during 3 months. A total of 483 students, aged between 18 and 24 years (Mean = 20.23, standard deviation = 1.99), was included in the study. The results showed that 72.9, 86.3, and 79.3% of them were suffering from psychological distress, anxiety and depressive symptoms, respectively. More than half the sample was also suffering from low self-esteem (57.6%), little optimism (56.7%), and a low sense of self-efficacy (62.7%). Regression analyses revealed that life satisfaction, self-esteem, optimism, self-efficacy and psychological distress were the most important predictors of stress. These findings allow us to better understand stress-vulnerability factors in students and drive us to substantially consider them in prevention programs.

[Status of the clinical laboratory in the mandatory postgraduate medical training system. (1) Report from a laboratory technologist].

PubMed

Nishikawa, Yoko

2006-06-01

According to a new system for postgraduate clinical training, 33 medical trainees have been accepted for the past two years at Osaka General Medical Center. Before practicing clinical medicine in each division by a super-rotated table, orientation is scheduled for 5 days to master the basic systems indispensable to the hospital. In this orientation, training in laboratory medicine is performed for 7 hours (3.5 hours for 2 days). Trainees are divided into 4 groups and learn emergency tests of chemistry, hematology and urinalysis, blood transfusion, physiology and microbiology for 60 min each. Laboratory technologists instruct the trainees to gain the basic skills. The main contents are blood gas measuring in chemistry, sample preparation in hematology and urinalysis, taking each other's ECG, ordering blood products for transfusion, serologic study of infectious diseases, and Gram stain in microbiology. Although it is difficult to find time for routine analysis and instructing trainees in the clinical laboratory, it is a suitable opportunity for revision, also for laboratory technologists, and for communication to discuss clinical matters.

Predictors of Stress in College Students

PubMed Central

Saleh, Dalia; Camart, Nathalie; Romo, Lucia

2017-01-01

University students often face different stressful situations and preoccupations: the first contact with the university, the freedom of schedule organization, the selection of their master's degree, very selective fields, etc. The purpose of this study is to evaluate a model of vulnerability to stress in French college students. Stress factors were evaluated by a battery of six scales that was accessible online during 3 months. A total of 483 students, aged between 18 and 24 years (Mean = 20.23, standard deviation = 1.99), was included in the study. The results showed that 72.9, 86.3, and 79.3% of them were suffering from psychological distress, anxiety and depressive symptoms, respectively. More than half the sample was also suffering from low self-esteem (57.6%), little optimism (56.7%), and a low sense of self-efficacy (62.7%). Regression analyses revealed that life satisfaction, self-esteem, optimism, self-efficacy and psychological distress were the most important predictors of stress. These findings allow us to better understand stress-vulnerability factors in students and drive us to substantially consider them in prevention programs. PMID:28179889

Exponential synchronization of neural networks with discrete and distributed delays under time-varying sampling.

PubMed

Wu, Zheng-Guang; Shi, Peng; Su, Hongye; Chu, Jian

2012-09-01

This paper investigates the problem of master-slave synchronization for neural networks with discrete and distributed delays under variable sampling with a known upper bound on the sampling intervals. An improved method is proposed, which captures the characteristic of sampled-data systems. Some delay-dependent criteria are derived to ensure the exponential stability of the error systems, and thus the master systems synchronize with the slave systems. The desired sampled-data controller can be achieved by solving a set of linear matrix inequalitys, which depend upon the maximum sampling interval and the decay rate. The obtained conditions not only have less conservatism but also have less decision variables than existing results. Simulation results are given to show the effectiveness and benefits of the proposed methods.

The faulty Master Events Controller is removed from STS-99 Endeavour

NASA Technical Reports Server (NTRS)

2000-01-01

Technicians remove a faulty Enhanced Main Events Controller (E- MEC) from Shuttle Endeavour at Launch Pad 39A. The E-MEC became suspect during the Jan. 31 launch countdown and mission STS-99 was delayed when NASA managers decided to replace it. Each Shuttle carries two enhanced master events controllers (E-MECs), which provide relays for onboard flight computers to send signals to arm and fire pyrotechnics that separate the solid rockets and external tank during assent. Both E-MECs are needed for the Shuttle to be cleared for flight. Currently Endeavour and Columbia are the only two orbiters with the E-MECs. Built by Rockwell's Satellite Space Electronics Division, Anaheim, Calif., each unit weighs 65 pounds and is approximately 20 inches long, 13 inches wide and 8 inches tall. Previously, three Shuttle flights have been scrubbed or delayed due to faulty MECs: STS-73, STS-49 and STS-41-D. The next scheduled date for launch of STS-99 is Feb. 11 at 12:30 p.m. EST.

The faulty Master Events Controller is carried away from STS-99 Endeavour

NASA Technical Reports Server (NTRS)

2000-01-01

Workers carry away the faulty Enhanced Main Events Controller (E- MEC) from Shuttle Endeavour at Launch Pad 39A. The E-MEC became suspect during the Jan. 31 launch countdown and mission STS-99 was delayed when NASA managers decided to replace it. Each Shuttle carries two enhanced master events controllers (E-MECs), which provide relays for onboard flight computers to send signals to arm and fire pyrotechnics that separate the solid rockets and external tank during assent. Both E-MECs are needed for the Shuttle to be cleared for flight. Currently Endeavour and Columbia are the only two orbiters with the E-MECs. Built by Rockwell's Satellite Space Electronics Division, Anaheim, Calif., each unit weighs 65 pounds and is approximately 20 inches long, 13 inches wide and 8 inches tall. Previously, three Shuttle flights have been scrubbed or delayed due to faulty MECs: STS-73, STS-49 and STS-41-D. The next scheduled date for launch of STS-99 is Feb. 11 at 12:30 p.m. EST.

Spectro-photometric determinations of Mn, Fe and Cu in aluminum master alloys

NASA Astrophysics Data System (ADS)

Rehan; Naveed, A.; Shan, A.; Afzal, M.; Saleem, J.; Noshad, M. A.

2016-08-01

Highly reliable, fast and cost effective Spectro-photometric methods have been developed for the determination of Mn, Fe & Cu in aluminum master alloys, based on the development of calibration curves being prepared via laboratory standards. The calibration curves are designed so as to induce maximum sensitivity and minimum instrumental error (Mn 1mg/100ml-2mg/100ml, Fe 0.01mg/100ml-0.2mg/100ml and Cu 2mg/100ml-10mg/ 100ml). The developed Spectro-photometric methods produce accurate results while analyzing Mn, Fe and Cu in certified reference materials. Particularly, these methods are suitable for all types of Al-Mn, Al-Fe and Al-Cu master alloys (5%, 10%, 50% etc. master alloys).Moreover, the sampling practices suggested herein include a reasonable amount of analytical sample, which truly represent the whole lot of a particular master alloy. Successive dilution technique was utilized to meet the calibration curve range. Furthermore, the workout methods were also found suitable for the analysis of said elements in ordinary aluminum alloys. However, it was observed that Cush owed a considerable interference with Fe, the later one may not be accurately measured in the presence of Cu greater than 0.01 %.

Topographies and dynamics on multidimensional potential energy surfaces

NASA Astrophysics Data System (ADS)

Ball, Keith Douglas

The stochastic master equation is a valuable tool for elucidating potential energy surface (PES) details that govern structural relaxation in clusters, bulk systems, and protein folding. This work develops a comprehensive framework for studying non-equilibrium relaxation dynamics using the master equation. Since our master equations depend upon accurate partition function models for use in Rice-Ramsperger-Kassel-Marcus (RRK(M) transition state theory, this work introduces several such models employing various harmonic and anharmonic approximations and compares their predicted equilibrium population distributions with those determined from molecular dynamics. This comparison is performed for the fully-delineated surfaces (KCl)5 and Ar9 to evaluate model performance for potential surfaces with long- and short-range interactions, respectively. For each system, several models perform better than a simple harmonic approximation. While no model gives acceptable results for all minima, and optimal modeling strategies differ for (KCl)5 and Ar9, a particular one-parameter model gives the best agreement with simulation for both systems. We then construct master equations from these models and compare their isothermal relaxation predictions for (KCl)5 and Ar9 with molecular dynamics simulations. This is the first comprehensive test of the kinetic performance of partition function models of its kind. Our results show that accurate modeling of transition-state partition functions is more important for (KCl)5 than for Ar9 in reproducing simulation results, due to a marked stiffening anharmonicity in the transition-state normal modes of (KCl)5. For both systems, several models yield qualitative agreement with simulation over a large temperature range. To examine the robustness of the master equation when applied to larger systems, for which full topographical descriptions would be either impossible or infeasible, we compute relaxation predictions for Ar11 using a master equation constructed from data representing the full PES, and compare these predictions to those of reduced master equations based on statistical samples of the full PES. We introduce a sampling method which generates random, Boltzmann-weighted, energetically 'downhill' sequences. The study reveals that, at moderate temperatures, the slowest relaxation timescale converges as the number of sequences in a sample grows to ~1000. Furthermore, the asymptotic timescale is comparable to the full-PES value.

Supporting Students' Assignment Writing: What Lecturers Do in a Master of Education Programme

ERIC Educational Resources Information Center

Li, Yongyan; Hu, Guangwei

2018-01-01

Teachers' instructional practices surrounding written assignments have been little researched, despite writing remaining the primary means of assessment in higher education, including postgraduate professional development programmes. In this paper, we report a study that explored what a sample of lecturers in a Master of Education programme at an…

Taiwanese Students' Evaluation of the Regis University's International Masters Degree in Business Administration.

ERIC Educational Resources Information Center

Hsieh, Wen-Ih

This study evaluated the International Masters Degree in Business Administration (IMBA) program at Regis University, focusing on the perceptions of Taiwanese students. Regis University, Denver, Colorado, is a leading school for adult education and a center for Taiwanese adult students. The sample consisted of 28 Taiwanese graduates of or students…

Replication of clinical innovations in multiple medical practices.

PubMed

Henley, N S; Pearce, J; Phillips, L A; Weir, S

1998-11-01

Many clinical innovations had been successfully developed and piloted in individual medical practice units of Kaiser Permanente in North Carolina during 1995 and 1996. Difficulty in replicating these clinical innovations consistently throughout all 21 medical practice units led to development of the interdisciplinary Clinical Innovation Implementation Team, which was formed by using existing resources from various departments across the region. REPLICATION MODEL: Based on a model of transfer of best practices, the implementation team developed a process and tools (master schedule and activity matrix) to quickly replicate successful pilot projects throughout all medical practice units. The process involved the following steps: identifying a practice and delineating its characteristics and measures (source identification); identifying a team to receive the (new) practice; piloting the practice; and standardizing, including the incorporation of learnings. The model includes the following components for each innovation: sending and receiving teams, an innovation coordinator role, an innovation expert role, a location expert role, a master schedule, and a project activity matrix. Communication depended on a partnership among the location experts (local knowledge and credibility), the innovation coordinator (process expertise), and the innovation experts (content expertise). Results after 12 months of working with the 21 medical practice units include integration of diabetes care team services into the practices, training of more than 120 providers in the use of personal computers and an icon-based clinical information system, and integration of a planwide self-care program into the medical practices--all with measurable improved outcomes. The model for sequential replication and the implementation team structure and function should be successful in other organizational settings.

Master and novice secondary science teachers' understandings and use of the learning cycle

NASA Astrophysics Data System (ADS)

Reap, Melanie Ann

2000-09-01

The learning cycle paradigm had been used in science classrooms for nearly four decades. This investigation seeks to reveal how the 1earning cycle, as originally designed, is currently understood and implemented by teachers in authentic classroom settings. The specific purposes of this study were: (1) to describe teachers who use the learning cycle and compare their understandings and perceptions of the learning cycle procedure in instruction; (2) to elicit novice and master teacher perspectives on their instruction and determine their perception of the process by which learning cycles are implemented in the science classroom; (3) to describe the context of science instruction in the novice and master teacher's classroom to ascertain how the teacher facilitates implementation of the learning cycle paradigm in their authentic classroom setting. The study used a learning cycle survey, interviews and classroom observations using the Learning Cycle Teacher Behavior Instruments and the Verbal Interaction Category System to explore these features of learning cycle instruction. The learning cycle survey was administered to a sample of teachers who use the learning cycle, including master and novice learning cycle teachers. One master and one novice learning cycle teacher were selected from this sample for further study. Analysis of the surveys showed no significant differences in master and novice teacher understandings of the learning cycle as assessed by the instrument. However, interviews and observations of the selected master and novice learning cycle teachers showed several differences in how the paradigm is understood and implemented in the classroom. The master learning cycle teacher showed a more developed teaching philosophy and had more engaged, extensive interactions with students. The novice learning cycle teacher held a more naive teaching philosophy and had fewer, less developed interactions with students. The most significant difference was seen in the use of questioning and discussion. The master teacher used diverse questioning techniques and guided students in discussion of their findings while the novice teachers used more rote response questions and controlled the discussion. The findings of this study have implications for science teacher education, especially in the preparation of teachers in science methods courses and student teaching, and in in-service education programs.

CTEPP STANDARD OPERATING PROCEDURE FOR SETTING UP A HOUSEHOLD SAMPLING SCHEDULE (SOP-2.10)

EPA Science Inventory

This SOP describes the method for scheduling study subjects for field sampling activities in North Carolina (NC) and Ohio (OH). There are three field sampling teams with two staff members on each team. Two field sampling teams collect the field data simultaneously. A third fiel...

A novel statistical approach for identification of the master regulator transcription factor.

PubMed

Sikdar, Sinjini; Datta, Susmita

2017-02-02

Transcription factors are known to play key roles in carcinogenesis and therefore, are gaining popularity as potential therapeutic targets in drug development. A 'master regulator' transcription factor often appears to control most of the regulatory activities of the other transcription factors and the associated genes. This 'master regulator' transcription factor is at the top of the hierarchy of the transcriptomic regulation. Therefore, it is important to identify and target the master regulator transcription factor for proper understanding of the associated disease process and identifying the best therapeutic option. We present a novel two-step computational approach for identification of master regulator transcription factor in a genome. At the first step of our method we test whether there exists any master regulator transcription factor in the system. We evaluate the concordance of two ranked lists of transcription factors using a statistical measure. In case the concordance measure is statistically significant, we conclude that there is a master regulator. At the second step, our method identifies the master regulator transcription factor, if there exists one. In the simulation scenario, our method performs reasonably well in validating the existence of a master regulator when the number of subjects in each treatment group is reasonably large. In application to two real datasets, our method ensures the existence of master regulators and identifies biologically meaningful master regulators. An R code for implementing our method in a sample test data can be found in http://www.somnathdatta.org/software . We have developed a screening method of identifying the 'master regulator' transcription factor just using only the gene expression data. Understanding the regulatory structure and finding the master regulator help narrowing the search space for identifying biomarkers for complex diseases such as cancer. In addition to identifying the master regulator our method provides an overview of the regulatory structure of the transcription factors which control the global gene expression profiles and consequently the cell functioning.

Real-time distributed scheduling algorithm for supporting QoS over WDM networks

NASA Astrophysics Data System (ADS)

Kam, Anthony C.; Siu, Kai-Yeung

1998-10-01

Most existing or proposed WDM networks employ circuit switching, typically with one session having exclusive use of one entire wavelength. Consequently they are not suitable for data applications involving bursty traffic patterns. The MIT AON Consortium has developed an all-optical LAN/MAN testbed which provides time-slotted WDM service and employs fast-tunable transceivers in each optical terminal. In this paper, we explore extensions of this service to achieve fine-grained statistical multiplexing with different virtual circuits time-sharing the wavelengths in a fair manner. In particular, we develop a real-time distributed protocol for best-effort traffic over this time-slotted WDM service with near-optical fairness and throughput characteristics. As an additional design feature, our protocol supports the allocation of guaranteed bandwidths to selected connections. This feature acts as a first step towards supporting integrated services and quality-of-service guarantees over WDM networks. To achieve high throughput, our approach is based on scheduling transmissions, as opposed to collision- based schemes. Our distributed protocol involves one MAN scheduler and several LAN schedulers (one per LAN) in a master-slave arrangement. Because of propagation delays and limits on control channel capacities, all schedulers are designed to work with partial, delayed traffic information. Our distributed protocol is of the `greedy' type to ensure fast execution in real-time in response to dynamic traffic changes. It employs a hybrid form of rate and credit control for resource allocation. We have performed extensive simulations, which show that our protocol allocates resources (transmitters, receivers, wavelengths) fairly with high throughput, and supports bandwidth guarantees.

300 Area treated effluent disposal facility sampling schedule

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loll, C.M.

1994-10-11

This document is the interface between the 300 Area Liquid Effluent Process Engineering (LEPE) group and the Waste Sampling and Characterization Facility (WSCF), concerning process control samples. It contains a schedule for process control samples at the 300 Area TEDF which describes the parameters to be measured, the frequency of sampling and analysis, the sampling point, and the purpose for each parameter.

Mastering Leadership Concepts through Utilizing Critical Thinking Strategies within Educational Administration Courses at Kuwait University

ERIC Educational Resources Information Center

Alqahtani, Abdulmuhsen Ayedh; Al-Enezi, Mutlaq M.

2012-01-01

The current study aims at exploring the students' perceptions of mastering leadership concepts and critical thinking strategies implemented by faculty members in the college of education at Kuwait University, and the impact of the later on former. The data was collected using a questionnaire on a sample consisting of 411 students representing…

Automated Scheduling of Personnel to Staff Operations for the Mars Science Laboratory

NASA Technical Reports Server (NTRS)

Knight, Russell; Mishkin, Andrew; Allbaugh, Alicia

2014-01-01

Leveraging previous work on scheduling personnel for space mission operations, we have adapted ASPEN (Activity Scheduling and Planning Environment) [1] to the domain of scheduling personnel for operations of the Mars Science Laboratory. Automated scheduling of personnel is not new. We compare our representations to a sampling of employee scheduling systems available with respect to desired features. We described the constraints required by MSL personnel schedulers and how each is handled by the scheduling algorithm.

Ancylostoma caninum: calibration and comparison of diagnostic accuracy of flotation in tube, McMaster and FLOTAC in faecal samples of dogs.

PubMed

Cringoli, Giuseppe; Rinaldi, Laura; Maurelli, Maria Paola; Morgoglione, Maria Elena; Musella, Vincenzo; Utzinger, Jürg

2011-05-01

We performed a calibration of flotation in tube, McMaster and FLOTAC to determine the optimal flotation solution (FS) and the influence of faecal preservation for the diagnosis of Ancylostoma caninum in dogs, and compared the accuracy of the three copromicroscopic techniques. Among nine different FS, sodium chloride and sodium nitrate performed best for detection and quantification of A. caninum eggs. Faecal samples, either fresh or preserved in formalin 5%, resulted in higher A. caninum egg counts, compared to frozen samples or preserved in formalin 10% or sodium acetate-acetic acid-formalin. FLOTAC consistently resulted in higher A. caninum eggs per gram of faeces (EPG) and lower coefficient of variation (CV) than McMaster and flotation in tube. The best results in terms of mean faecal egg counts (highest value, i.e. 117.0EPG) and CV (lowest value, i.e. 4.8%) were obtained with FLOTAC using sodium chloride and faecal samples preserved in formalin 5%. Our findings suggest that the FLOTAC technique should be considered for the diagnosis of A. caninum in dogs. Copyright © 2011 Elsevier Inc. All rights reserved.

Modified flotation method with the use of Percoll for the detection of Isospora suis oocysts in suckling piglet faeces.

PubMed

Karamon, Jacek; Ziomko, Irena; Cencek, Tomasz; Sroka, Jacek

2008-10-01

The modification of flotation method for the examination of diarrhoeic piglet faeces for the detection of Isospora suis oocysts was elaborated. The method was based on removing fractions of fat from the sample of faeces by centrifugation with a 25% Percoll solution. The investigations were carried out in comparison to the McMaster method. From five variants of the Percoll flotation method, the best results were obtained when 2ml of flotation liquid per 1g of faeces were used. The limit of detection in the Percoll flotation method was 160 oocysts per 1g, and was better than with the McMaster method. The efficacy of the modified method was confirmed by results obtained in the examination of the I. suis infected piglets. From all faecal samples, positive samples in the Percoll flotation method were double the results than that of the routine method. Oocysts were first detected by the Percoll flotation method on day 4 post-invasion, i.e. one-day earlier than with the McMaster method. During the experiment (except for 3 days), the extensity of I. suis invasion in the litter examined by the Percoll flotation method was higher than that with the McMaster method. The obtained results show that the modified flotation method with the use of Percoll could be applied in the diagnostics of suckling piglet isosporosis.

300 Area treated effluent disposal facility sampling schedule. Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loll, C.M.

1995-03-28

This document is the interface between the 300 Area liquid effluent process engineering (LEPE) group and the waste sampling and characterization facility (WSCF), concerning process control samples. It contains a schedule for process control samples at the 300 Area TEDF which describes the parameters to be measured, the frequency of sampling and analysis, the sampling point, and the purpose for each parameter.

Evaluation and utilization of preassembled frozen commercial fast real-time qPCR master mixes for detection of cytomegalovirus and BK virus.

PubMed

Glover, William A; Atienza, Ederlyn E; Nesbitt, Shannon; Kim, Woo J; Castor, Jared; Cook, Linda; Jerome, Keith R

2016-01-01

Quantitative DNA detection of cytomegalovirus (CMV) and BK virus (BKV) is critical in the management of transplant patients. Quantitative laboratory-developed procedures for CMV and BKV have been described in which much of the processing is automated, resulting in rapid, reproducible, and high-throughput testing of transplant patients. To increase the efficiency of such assays, the performance and stability of four commercial preassembled frozen fast qPCR master mixes (Roche FastStart Universal Probe Master Mix with Rox, Bio-Rad SsoFast Probes Supermix with Rox, Life Technologies TaqMan FastAdvanced Master Mix, and Life Technologies Fast Universal PCR Master Mix), in combination with in-house designed primers and probes, was evaluated using controls and standards from standard CMV and BK assays. A subsequent parallel evaluation using patient samples was performed comparing the performance of freshly prepared assay mixes versus aliquoted frozen master mixes made with two of the fast qPCR mixes (Life Technologies TaqMan FastAdvanced Master Mix, and Bio-Rad SsoFast Probes Supermix with Rox), chosen based on their performance and compatibility with existing PCR cycling conditions. The data demonstrate that the frozen master mixes retain excellent performance over a period of at least 10 weeks. During the parallel testing using clinical specimens, no difference in quantitative results was observed between the preassembled frozen master mixes and freshly prepared master mixes. Preassembled fast real-time qPCR frozen master mixes perform well and represent an additional strategy laboratories can implement to reduce assay preparation times, and to minimize technical errors and effort necessary to perform clinical PCR. © 2015 Wiley Periodicals, Inc.

Discrimination of Variable Schedules Is Controlled by Interresponse Times Proximal to Reinforcement

ERIC Educational Resources Information Center

Tanno, Takayuki; Silberberg, Alan; Sakagami, Takayuki

2012-01-01

In Experiment 1, food-deprived rats responded to one of two schedules that were, with equal probability, associated with a sample lever. One schedule was always variable ratio, while the other schedule, depending on the trial within a session, was: (a) a variable-interval schedule; (b) a tandem variable-interval,…

Data analysis considerations for pesticides determined by National Water Quality Laboratory schedule 2437

USGS Publications Warehouse

Shoda, Megan E.; Nowell, Lisa H.; Stone, Wesley W.; Sandstrom, Mark W.; Bexfield, Laura M.

2018-04-02

In 2013, the U.S. Geological Survey National Water Quality Laboratory (NWQL) made a new method available for the analysis of pesticides in filtered water samples: laboratory schedule 2437. Schedule 2437 is an improvement on previous analytical methods because it determines the concentrations of 225 fungicides, herbicides, insecticides, and associated degradates in one method at similar or lower concentrations than previously available methods. Additionally, the pesticides included in schedule 2437 were strategically identified in a prioritization analysis that assessed likelihood of occurrence, prevalence of use, and potential toxicity. When the NWQL reports pesticide concentrations for analytes in schedule 2437, the laboratory also provides supplemental information useful to data users for assessing method performance and understanding data quality. That supplemental information is discussed in this report, along with an initial analysis of analytical recovery of pesticides in water-quality samples analyzed by schedule 2437 during 2013–2015. A total of 523 field matrix spike samples and their paired environmental samples and 277 laboratory reagent spike samples were analyzed for this report (1,323 samples total). These samples were collected in the field as part of the U.S. Geological Survey National Water-Quality Assessment groundwater and surface-water studies and as part of the NWQL quality-control program. This report reviews how pesticide samples are processed by the NWQL, addresses how to obtain all the data necessary to interpret pesticide concentrations, explains the circumstances that result in a reporting level change or the occurrence of a raised reporting level, and describes the calculation and assessment of recovery. This report also discusses reasons why a data user might choose to exclude data in an interpretive analysis and outlines the approach used to identify the potential for decreased data quality in the assessment of method recovery. The information provided in this report is essential to understanding pesticide data determined by schedule 2437 and should be reviewed before interpretation of these data.

Systems design study of the Pioneer Venus spacecraft. Volume 2. Preliminary program development plan

NASA Technical Reports Server (NTRS)

1973-01-01

The preliminary development plan for the Pioneer Venus program is presented. This preliminary plan treats only developmental aspects that would have a significant effect on program cost. These significant development areas were: master program schedule planning; test planning - both unit and system testing for probes/orbiter/ probe bus; ground support equipment; performance assurance; and science integration Various test planning options and test method techniques were evaluated in terms of achieving a low-cost program without degrading mission performance or system reliability. The approaches studied and the methodology of the selected approach are defined.

Office of the Secretary of Defense Research, Development Test and Evaluation, Development and Test Evaluation, Defense, Director of Operational Test and Evaluation Defense, FY 1994 Budget Estimates, Justification of Estimates Submitted to Congress April 1993

DTIC Science & Technology

1993-04-01

separation capability. o Demonstrate advanced KKVs in the 6-20 KG weight class. o Test planning for SRAM/LEAP and PATRIOT/LEAP integrated technology...packaging techniques to reduce satellite size, weight , power, and total system costs. Further development of these technologies are absolutely 4...1993 o Developed a master plan with a delivery schedule for each light- weight subassembly in the sensor integration payload. o Finalized a contract for

Automated high-throughput flow-through real-time diagnostic system

DOEpatents

Regan, John Frederick

2012-10-30

An automated real-time flow-through system capable of processing multiple samples in an asynchronous, simultaneous, and parallel fashion for nucleic acid extraction and purification, followed by assay assembly, genetic amplification, multiplex detection, analysis, and decontamination. The system is able to hold and access an unlimited number of fluorescent reagents that may be used to screen samples for the presence of specific sequences. The apparatus works by associating extracted and purified sample with a series of reagent plugs that have been formed in a flow channel and delivered to a flow-through real-time amplification detector that has a multiplicity of optical windows, to which the sample-reagent plugs are placed in an operative position. The diagnostic apparatus includes sample multi-position valves, a master sample multi-position valve, a master reagent multi-position valve, reagent multi-position valves, and an optical amplification/detection system.

Physical dimensions, torsional performance, bending properties, and metallurgical characteristics of rotary endodontic instruments. VI. Canal Master drills.

PubMed

Luebke, N H; Brantley, W A; Sabri, Z I; Luebke, F L; Lausten, L L

1995-05-01

A laboratory study was performed on machine-driven Canal Master drills to determine their physical dimensions, torsional performance, bending properties, and metallurgical characteristics in fracture. Physical dimensions were determined for each of the available sizes (#50 to #100) of Canal Master drills from the manufacturer that distributes these instruments in the United States. Samples were also tested in clockwise torsion using a Maillefer memocouple. Bending properties of cantilever specimens were measured with a Tinius Olsen stiffness tester. Bending fatigue testing was performed on a unique laboratory apparatus. Scanning electron microscope examination confirmed visual observations that the stainless steel Canal Master drills exhibited ductile torsional fracture. This study is part of a continuing investigation to establish standards for all machine-driven rotary endodontic instruments.

Effect of Different Sampling Schedules on Results of Bioavailability and Bioequivalence Studies: Evaluation by Means of Monte Carlo Simulations.

PubMed

Kano, Eunice Kazue; Chiann, Chang; Fukuda, Kazuo; Porta, Valentina

2017-08-01

Bioavailability and bioequivalence study is one of the most frequently performed investigations in clinical trials. Bioequivalence testing is based on the assumption that 2 drug products will be therapeutically equivalent when they are equivalent in the rate and extent to which the active drug ingredient or therapeutic moiety is absorbed and becomes available at the site of drug action. In recent years there has been a significant growth in published papers that use in silico studies based on mathematical simulations to analyze pharmacokinetic and pharmacodynamic properties of drugs, including bioavailability and bioequivalence aspects. The goal of this study is to evaluate the usefulness of in silico studies as a tool in the planning of bioequivalence, bioavailability and other pharmacokinetic assays, e.g., to determine an appropriate sampling schedule. Monte Carlo simulations were used to define adequate blood sampling schedules for a bioequivalence assay comparing 2 different formulations of cefadroxil oral suspensions. In silico bioequivalence studies comparing different formulation of cefadroxil oral suspensions using various sampling schedules were performed using models. An in vivo study was conducted to confirm in silico results. The results of in silico and in vivo bioequivalence studies demonstrated that schedules with fewer sampling times are as efficient as schedules with larger numbers of sampling times in the assessment of bioequivalence, but only if T max is included as a sampling time. It was also concluded that in silico studies are useful tools in the planning of bioequivalence, bioavailability and other pharmacokinetic in vivo assays. © Georg Thieme Verlag KG Stuttgart · New York.

Longer Telomere Length in Elite Master Sprinters: Relationship to Performance and Body Composition.

PubMed

Simoes, Herbert Gustavo; Sousa, Caio Victor; Dos Santos Rosa, Thiago; da Silva Aguiar, Samuel; Deus, Lysleine Alves; Rosa, Erica Carine Campos Caldas; Amato, Angelica Amorim; Andrade, Rosangela Vieira

2017-12-01

Emergent evidence suggests that the long-term healthy lifestyle of master athletes may attenuate aging. We compared telomere length (TL) of high-level master sprinters and non-athlete age-matched controls, and analyzed the relationships of TL with performance and body fat. Elite master sprinters (n=11; aged 50.1±9.2yrs) and healthy untrained controls (n=10; aged 45.4±10.9yrs) had blood samples collected for biochemical and biomolecular analyses. Master sprinters had longer TL, lower body fat and BMI, and a better lipid profile than age-matched controls (p<0.05). A large effect size was verified comparing TL between athletes vs. controls (Cohen's d=1.039), with a significant negative correlation between TL and performance decline per decade (r=-0.624, p<0.01) and a positive correlation of TL and actual performance level (r=0.641, p<0.01). In conclusion, TL of elite master sprinters was longer than their untrained peers, and seems to be not only a marker of health status, but also an indicator of sports longevity since both actual performance level and its decrease over years were related to TL. Further research might assess the TL of elite master endurance athletes for comparison with sprinters, and also investigate the underlying mechanisms by which the attenuation of telomere shortening occurs in master athletes. © Georg Thieme Verlag KG Stuttgart · New York.

Autonomy Architectures for a Constellation of Spacecraft

NASA Technical Reports Server (NTRS)

Barrett, Anthony

2000-01-01

Until the past few years, missions typically involved fairly large expensive spacecraft. Such missions have primarily favored using older proven technologies over more recently developed ones, and humans controlled spacecraft by manually generating detailed command sequences with low-level tools and then transmitting the sequences for subsequent execution on a spacecraft controller. This approach toward controlling a spacecraft has worked spectacularly on previous missions, but it has limitations deriving from communications restrictions - scheduling time to communicate with a particular spacecraft involves competing with other projects due to the limited number of deep space network antennae. This implies that a spacecraft can spend a long time just waiting whenever a command sequence fails. This is one reason why the New Millennium program has an objective to migrate parts of mission control tasks onboard a spacecraft to reduce wait time by making spacecraft more robust. The migrated software is called a "remote agent" and has 4 components: a mission manager to generate the high level goals, a planner/scheduler to turn goals into activities while reasoning about future expected situations, an executive/diagnostics engine to initiate and maintain activities while interpreting sensed events by reasoning about past and present situations, and a conventional real-time subsystem to interface with the spacecraft to implement an activity's primitive actions. In addition to needing remote planning and execution for isolated spacecraft, a trend toward multiple-spacecraft missions points to the need for remote distributed planning and execution. The past few years have seen missions with growing numbers of probes. Pathfinder has its rover (Sojourner), Cassini has its lander (Huygens), and the New Millenium Deep Space 3 (DS3) proposal involves a constellation of 3 spacecraft for interferometric mapping. This trend is expected to continue to progressively larger fleets. For example, one mission proposed to succeed DS3 would have 18 spacecraft flying in formation in order to detect earth-sized planets orbiting other stars. A proposed magnetospheric constellation would involve 5 to 500 spacecraft in Earth orbit to measure global phenomena within the magnetosphere. This work describes and compares three autonomy architectures for a system that continuously plans to control a fleet of spacecraft using collective mission goals instead of goals or command sequences for each spacecraft. A fleet of self-commanding spacecraft would autonomously coordinate itself to satisfy high level science and engineering goals in a changing partially-understood environment making feasible the operation of tens or even a hundred spacecraft (such as for interferometry or plasma physics missions). The easiest way to adapt autonomous spacecraft research to controlling constellations involves treating the constellation as a single spacecraft. Here one spacecraft directly controls the others as if they were connected. The controlling "master" spacecraft performs all autonomy reasoning, and the slaves only have real-time subsystems to execute the master's commands and transmit local telemetry/observations. The executive/diagnostics module starts actions and the master's real-time subsystem controls the action either locally or remotely through a slave. While the master/slave approach benefits from conceptual simplicity, it relies on an assumption that the master spacecraft's executive can continuously monitor the slaves' real-time subsystems, and this relies on high-bandwidth highly-reliable communications. Since unintended results occur fairly rarely, one way to relax the bandwidth requirements involves only monitoring unexpected events in spacecraft. Unfortunately, this disables the ability to monitor for unexpected events between spacecraft and leads to a host of coordination problems among the slaves. Also, failures in the communications system can result in losing slaves. The other two architectures improve robustness while reducing communications by progressively distributing more of the other three remote agent components across the constellation. In a teamwork architecture, all spacecraft have executives and real-time subsystems - only the leader has the planner/scheduler and mission manager. Finally, distributing all remote agent components leads to a peer-to-peer approach toward constellation control.

Speculations on the Future of Taught Masters Courses in Gerontology: Lessons from a Comparison of England, Scotland, Finland, and Spain

ERIC Educational Resources Information Center

Askham, Janet; Gilhooly, Mary; Parkatti, Terttu; Vega, Jose-Luis

2007-01-01

Postgraduate education in gerontology is now widespread within European universities, but, even so, such developments remain very uneven. This paper outlines the variety of provision by describing Master's programmes in a sample of countries: England, Scotland, Finland, and Spain. These programmes illustrate some of the common problems: lack of…

Distributed Leadership an Instrument for School Improvement: The Study of Public Senior High Schools in Ghana

ERIC Educational Resources Information Center

Dampson, Dandy George; Havor, Felicia Mensah; Laryea, Prince

2018-01-01

The purpose of the study was to investigate the influence of distributed leadership in Public Senior High Schools (SHS) with regard to school improvement. Using the Explanatory Sequential Mixed-Method design, 92 teachers and 4 head masters and 4 assistant head masters were randomly and census sampled. Three research questions were formulated and…

Factorial Validity of the Chedoke-McMaster Attitudes towards Children with Handicaps Scale (CATCH)

ERIC Educational Resources Information Center

Bossaert, Goele; Petry, Katja

2013-01-01

The Chedoke-McMaster Attitudes towards Children with Handicaps Scale (CATCH) has been developed to measure the attitudes of children toward peers with disabilities. The present study aims to evaluate the factorial validity of the CATCH in a sample of 2396 students in 7th grade, including 179 students with disabilities and 2217 typically developing…

Motivational Regulatory Styles of Graduate Students Enrolled in Online Prescribed and Elective Courses

ERIC Educational Resources Information Center

Wasmanski, Stephanie Lynn

2018-01-01

The purpose of this study was to explore the regulatory styles, as identified in Ryan and Deci's Self-Determination Theory, of graduate students enrolled in prescribed and elective courses, in a fully online Master of Education degree program. A sample consisting of 53 participants, enrolled in a master's degree program in education at a state…

AAMFT Master Series Tapes: An Analysis of the Inclusion of Feminist Principles into Family Therapy Practice.

ERIC Educational Resources Information Center

Haddock, Shelley A.; MacPhee, David; Zimmerman, Toni Schindler

2001-01-01

Content analysis of 23 American Association for Marriage and Family Therapy Master Series tapes was used to determine how well feminist behaviors have been incorporated into ideal family therapy practice. Feminist behaviors were infrequent, being evident in fewer than 3% of time blocks in event sampling and 10 of 39 feminist behaviors of the…

Prediction of Participation of Undergraduate University Students in a Music and Dance Master's Degree Program

ERIC Educational Resources Information Center

Bebetsos, Evangelos

2015-01-01

The aim of the study was the investigation of students' attitudes and intention towards their possible participation in a graduate Music and Dance Distance Learning Master's Degree Program. The sample consisted of consisted of 229 undergraduate University students, between the ages of 20 to 63 yrs. of age (M = 34.24, SD = 10.70). More…

Counting Chickens before They Are Hatched: An Examination of Student Retention, Graduation, Attrition, and Dropout Measurement Validity in an Online Master's Environment

ERIC Educational Resources Information Center

Haydarov, Rustam; Moxley, Virginia; Anderson, Dawn

2013-01-01

This article examines definitions, rationales, and calculations associated with higher education performance measures: persistence, retention rate, attrition rate, drop-out rate, and graduation rate. Strengths and limitations of these measures are scrutinized relative to online master's programs. Outcomes of a sample of students (N = 96) enrolled…

RadNet Sampling and Analyses Schedules

EPA Pesticide Factsheets

RadNet air monitors operate continuously and samples of air, precipitation and drinking water and analyzed on a routine schedule. RadNet can send deployable monitors to any U.S. location in the case of a radiological emergency.

NASDA's earth observation satellite data archive policy for the earth observation data and information system (EOIS)

NASA Technical Reports Server (NTRS)

Sobue, Shin-ichi; Yoshida, Fumiyoshi; Ochiai, Osamu

1996-01-01

NASDA's new Advanced Earth Observing Satellite (ADEOS) is scheduled for launch in August, 1996. ADEOS carries 8 sensors to observe earth environmental phenomena and sends their data to NASDA, NASA, and other foreign ground stations around the world. The downlink data bit rate for ADEOS is 126 MB/s and the total volume of data is about 100 GB per day. To archive and manage such a large quantity of data with high reliability and easy accessibility it was necessary to develop a new mass storage system with a catalogue information database using advanced database management technology. The data will be archived and maintained in the Master Data Storage Subsystem (MDSS) which is one subsystem in NASDA's new Earth Observation data and Information System (EOIS). The MDSS is based on a SONY ID1 digital tape robotics system. This paper provides an overview of the EOIS system, with a focus on the Master Data Storage Subsystem and the NASDA Earth Observation Center (EOC) archive policy for earth observation satellite data.

STS-99 workers carry new Master Events Controller to Endeavour

NASA Technical Reports Server (NTRS)

2000-01-01

Workers carry the replacement Enhanced Main Events Controller (E- MEC) to Shuttle Endeavour at Launch Pad 39A for installation in the aft compartment of the payload bay. The original E-MEC became suspect during the Jan. 31 launch countdown and mission STS-99 was delayed when NASA managers decided to replace it. Each Shuttle carries two enhanced master events controllers (E-MECs), which provide relays for onboard flight computers to send signals to arm and fire pyrotechnics that separate the solid rockets and external tank during assent. Both E-MECs are needed for the Shuttle to be cleared for flight. Currently Endeavour and Columbia are the only two orbiters with the E-MECs. Built by Rockwell's Satellite Space Electronics Division, Anaheim, Calif., each unit weighs 65 pounds and is approximately 20 inches long, 13 inches wide and 8 inches tall. Previously, three Shuttle flights have been scrubbed or delayed due to faulty MECs: STS-73, STS-49 and STS-41-D. The next scheduled date for launch of STS-99 is Feb. 11 at 12:30 p.m. EST.

STS-99 workers move new Master Events Controller into aft compartment

NASA Technical Reports Server (NTRS)

2000-01-01

At Launch Pad 39A, workers move the replacement Enhanced Main Events Controller (E-MEC) into Shuttle Endeavour's aft compartment in the payload bay. The original E-MEC became suspect during the Jan. 31 launch countdown and mission STS-99 was delayed when NASA managers decided to replace it. Each Shuttle carries two enhanced master events controllers (E-MECs), which provide relays for onboard flight computers to send signals to arm and fire pyrotechnics that separate the solid rockets and external tank during assent. Both E-MECs are needed for the Shuttle to be cleared for flight. Currently Endeavour and Columbia are the only two orbiters with the E-MECs. Built by Rockwell's Satellite Space Electronics Division, Anaheim, Calif., each unit weighs 65 pounds and is approximately 20 inches long, 13 inches wide and 8 inches tall. Previously, three Shuttle flights have been scrubbed or delayed due to faulty MECs: STS-73, STS-49 and STS-41-D. The next scheduled date for launch of STS-99 is Feb. 11 at 12:30 p.m. EST.

The Challenges of Integrating NASA's Human, Budget, and Data Capital within the Constellation Program's Exploration Launch Projects Office

NASA Technical Reports Server (NTRS)

Kidd, Luanne; Morris, Kenneth B.; Self, Timothy A.

2007-01-01

The U.S. Vision for Space Exploration directs NASA to retire the Space Shuttle in 2010 and replace it with safe, reliable, and cost-effective space transportation systems for crew and cargo travel to the Moon, Mars, and beyond. Such emerging space transportation initiatives face massive organizational challenges, including building and nurturing an experienced, dedicated team with the right skills for the required tasks; allocating and tracking the fiscal capital invested in achieving technical progress against an integrated master schedule; and turning generated data into useful knowledge that equips the team to design and develop superior products for customers and stakeholders. It has been more than 30 years since the Space Shuttle was designed; therefore, the current aerospace workforce has limited experience with developing new designs for human-rated spaceflight hardware. To accomplish these activities, NASA is using a wide range of state-of-the-art information technology tools that connect its diverse, decentralized teams and provide timely, accurate information for decision makers. In addition, business professionals are assisting technical managers with planning, tracking, and forecasting resource use against an integrated master schedule that horizontally and vertically interlinks hardware elements and milestone events. Furthermore, NASA is employing a wide variety of strategies to ensure that it has the motivated and qualified staff it needs for the tasks ahead. This paper discusses how NASA's Exploration Launch Projects Office, which is responsible for delivering these new launch vehicles, integrates its resources to create an engineering business environment that promotes mission success, which is defined by replacing the Space Shuttle by 2014 and returning to the Moon by 2020.

Adding School to Work-Family Balance: The Role of Support for Portuguese Working Mothers Attending a Master's Degree

ERIC Educational Resources Information Center

Andrade, Cláudia; Matias, Marisa

2017-01-01

This qualitative study examines the work, family, and study experiences of Portuguese professional women in two different career stages: early career and mid-career. Using semi-structured interviews with a sample of 22 working mothers enrolled in a master's degree, this study explores their experiences of combining the roles of mother, worker and…

Syracuse urban forest master plan: guiding the city's forest resource into the 21st century

Treesearch

David J. Nowak; Paul R. O' Connor; [Compilers

2001-01-01

The Syracuse Urban Forest Master Plan is one of the most comprehensive urban forest assessments ever developed for a city. This report combines a high-resolution digital urban cover map with field vegetation sampling data from all land uses, a 100-percent street-tree inventory, a survey of city residents regarding desirable and undesirable tree characteristics and...

International VLBI Service for Geodesy and Astrometry. Delivering high-quality products and embarking on observations of the next generation

NASA Astrophysics Data System (ADS)

Nothnagel, A.; Artz, T.; Behrend, D.; Malkin, Z.

2017-07-01

The International VLBI Service for Geodesy and Astrometry (IVS) regularly produces high-quality Earth orientation parameters from observing sessions employing extensive networks or individual baselines. The master schedule is designed according to the telescope days committed by the stations and by the need for dense sampling of the Earth orientation parameters (EOP). In the pre-2011 era, the network constellations with their number of telescopes participating were limited by the playback and baseline capabilities of the hardware (Mark4) correlators. This limitation was overcome by the advent of software correlators, which can now accommodate many more playback units in a flexible configuration. In this paper, we describe the current operations of the IVS with special emphasis on the quality of the polar motion results since these are the only EOP components which can be validated against independent benchmarks. The polar motion results provided by the IVS have improved continuously over the years, now providing an agreement with IGS results at the level of 20-25 μas in a WRMS sense. At the end of the paper, an outlook is given for the realization of the VLBI Global Observing System.

21 CFR 111.80 - What representative samples must you collect?

Code of Federal Regulations, 2010 CFR

2010-04-01

... Process Control System § 111.80 What representative samples must you collect? The representative samples... unique lot within each unique shipment); (b) Representative samples of in-process materials for each manufactured batch at points, steps, or stages, in the manufacturing process as specified in the master...

Toward a new paradigm in graduate medical education in the United States: elimination of the 24-hour call.

PubMed

Mautone, Susan G

2009-12-01

Sleep deprivation negatively affects resident performance, education, and safety. Concerns over these effects have prompted efforts to reduce resident hours. This article describes the design and implementation of a scheduling system with no continuous 24-hour calls. Aims included meeting Accreditation Council for Graduate Medical Education work hour requirements without increasing resident complement, maximizing continuity of learning and patient care, maintaining patient care quality, and acceptance by residents, faculty, and administration. Various coverage options were formulated and discussed. The final schedule was the product of consensus. After re-engineering the master rotation schedule, service-specific conversion of on-call schedules was initiated in July 2003 and completed in July 2004. Annual in-training and certifying examination performance, length of stay, patient mortalities, resident motor vehicle accidents/near misses, and resident satisfaction with the new scheduling system were tracked. Continuous 24-hour call has been eliminated from the program since July 2004, with the longest assigned shift being 14 hours. Residents have at least 1 free weekend per month, a 10-hour break between consecutive assigned duty hours, and a mandatory 4-hour "nap" break if assigned a night shift immediately following a day shift. Program-wide, duty hours average 66 hours per week for first-year residents, 63 hours per week for second-year residents, and 60 hours per week for third-year residents. Self-reported motor vehicle accidents and/or near misses of accidents significantly decreased (P < .001) and resident satisfaction increased (P  =  .42). The change was accomplished at no additional cost to the institution and with no adverse patient care or educational outcomes. Pediatric residency training with restriction to 14 consecutive duty hours is effective and well accepted by stakeholders. Five years later, the re-engineered schedule has become the new "normal" for our program.

Mental health care treatment initiation when mental health services are incorporated into primary care practice.

PubMed

Kessler, Rodger

2012-01-01

Most primary care patients with mental health issues are identified or treated in primary care rather than the specialty mental health system. Primary care physicians report that their patients do not have access to needed mental health care. When referrals are made to the specialty behavioral or mental health care system, rates of patients who initiate treatment are low. Collaborative care models, with mental health clinicians as part of the primary care medical staff, have been suggested as an alternative. The aim of this study is to examine rates of treatment startup in 2 collaborative care settings: a rural family medicine office and a suburban internal medicine office. In both practices referrals for mental health services are made within the practice. Referral data were drawn from 2 convenience samples of patients referred by primary care physicians for collaborative mental health treatment at Fletcher Allen Health Care in Vermont. The first sample consisted of 93 consecutively scheduled referrals in a family medicine office (sample A) between January 2006 and December 2007. The second sample consisted of 215 consecutive scheduled referrals at an internal medicine office (sample B) between January 2009 and December 2009. Referral data identified age, sex, and presenting mental health/medical problem. In sample A, 95.5% of those patients scheduling appointments began behavioral health treatment; in sample B this percentage was 82%. In sample B, 69% of all patients initially referred for mental health care both scheduled and initiated treatment. When referred to a mental health clinician who provides on-site access as part of a primary care mental health collaborative care model, a high percentage of patients referred scheduled care. Furthermore, of those who scheduled care, a high percentage of patients attend the scheduled appointment. Findings persist despite differences in practice type, populations, locations, and time frames of data collection. That the findings persist across the different offices suggests that this model of care may contain elements that improve the longstanding problem of poor treatment initiation rates when primary care physicians refer patients for outpatient behavioral health services.

Pooling sheep faecal samples for the assessment of anthelmintic drug efficacy using McMaster and Mini-FLOTAC in gastrointestinal strongyle and Nematodirus infection.

PubMed

Kenyon, Fiona; Rinaldi, Laura; McBean, Dave; Pepe, Paola; Bosco, Antonio; Melville, Lynsey; Devin, Leigh; Mitchell, Gillian; Ianniello, Davide; Charlier, Johannes; Vercruysse, Jozef; Cringoli, Giuseppe; Levecke, Bruno

2016-07-30

In small ruminants, faecal egg counts (FECs) and reduction in FECs (FECR) are the most common methods for the assessment of intensity of gastrointestinal (GI) nematodes infections and anthelmintic drug efficacy, respectively. The main limitation of these methods is the time and cost to conduct FECs on a representative number of individual animals. A cost-saving alternative would be to examine pooled faecal samples, however little is known regarding whether pooling can give representative results. In the present study, we compared the FECR results obtained by both an individual and a pooled examination strategy across different pool sizes and analytical sensitivity of the FEC techniques. A survey was conducted on 5 sheep farms in Scotland, where anthelmintic resistance is known to be widespread. Lambs were treated with fenbendazole (4 groups), levamisole (3 groups), ivermectin (3 groups) or moxidectin (1 group). For each group, individual faecal samples were collected from 20 animals, at baseline (D0) and 14 days after (D14) anthelmintic administration. Faecal samples were analyzed as pools of 3-5, 6-10, and 14-20 individual samples. Both individual and pooled samples were screened for GI strongyle and Nematodirus eggs using two FEC techniques with three different levels of analytical sensitivity, including Mini-FLOTAC (analytical sensitivity of 10 eggs per gram of faeces (EPG)) and McMaster (analytical sensitivity of 15 or 50 EPG).For both Mini-FLOTAC and McMaster (analytical sensitivity of 15 EPG), there was a perfect agreement in classifying the efficacy of the anthelmintic as 'normal', 'doubtful' or 'reduced' regardless of pool size. When using the McMaster method (analytical sensitivity of 50 EPG) anthelmintic efficacy was often falsely classified as 'normal' or assessment was not possible due to zero FECs at D0, and this became more pronounced when the pool size increased. In conclusion, pooling ovine faecal samples holds promise as a cost-saving and efficient strategy for assessing GI nematode FECR. However, for the assessment FECR one will need to consider the baseline FEC, pool size and analytical sensitivity of the method. Copyright © 2016. Published by Elsevier B.V.

Remote Excavation of Heavily Contaminated UXO Sites. The Range Master

DTIC Science & Technology

2007-09-05

NUMBER 5c. PROGRAM ELEMENT NUMBER 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 6. AUTHOR(S) 7. PERFORMING ORGANIZATION NAME(S) AND...Master) ESTCP Project UX-200327 ii Final Phase II Report, September 2007 3.5.5 Sampling Plan...Explosive HSP Health and Safety Program HTRW Hazardous, Toxic, and Radioactive Waste HTW Hazardous and Toxic Waste HW Hazardous Waste IAW In

Report of the River Master of the Delaware River for the period December 1, 2008–November 30, 2009

USGS Publications Warehouse

Krejmas, Bruce E.; Paulachok, Gary N.; Mason, Jr., Robert R.; Owens, Marie

2016-04-06

A Decree of the Supreme Court of the United States, entered June 7, 1954, established the position of Delaware River Master within the U.S. Geological Survey (USGS). In addition, the Decree authorizes diversions of water from the Delaware River Basin and requires compensating releases from certain reservoirs, owned by New York City, to be made under the supervision and direction of the River Master. The Decree stipulates that the River Master will furnish reports to the Court, not less frequently than annually. This report is the 56th Annual Report of the River Master of the Delaware River. It covers the 2009 River Master report year, the period from December 1, 2008, to November 30, 2009.During the report year, precipitation in the upper Delaware River Basin was 50.89 inches (in.) or 116 percent of the long-term average. Combined storage in Pepacton, Cannonsville, and Neversink Reservoirs remained high throughout the year and did not decline below 80 percent of combined capacity at any time. Delaware River operations during the year were conducted as stipulated by the Decree and the Flexible Flow Management Program (FFMP).Diversions from the Delaware River Basin by New York City and New Jersey were in full compliance with the Decree. Reservoir releases were made as directed by the River Master at rates designed to meet the flow objective for the Delaware River at Montague, New Jersey, on 25 days during the report year. Releases were made at conservation rates—rates designed to relieve thermal stress and protect the fishery and aquatic habitat in the tailwaters of the reservoirs—on all other days.During the report year, New York City and New Jersey complied fully with the terms of the Decree, and directives and requests of the River Master.As part of a long-term program, the quality of water in the Delaware Estuary between Trenton, New Jersey, and Reedy Island Jetty, Delaware, was monitored at various locations. Data on water temperature, specific conductance, dissolved oxygen, and pH were collected continuously by electronic instruments at four sites. In addition, selected water-quality data were collected at 22 sites on a monthly basis.The Delaware River Basin Commission (DRBC) collects monthly samples from March through October at 22 sites between Biles Channel and South Brown Shoal. Samples were collected and analyzed by the State of Delaware for the DRBC. At each site, water samples were collected at a single point near the center of the channel near the surface and analyzed for selected physical properties, and chemical and biological constituents including routine chemical substances, nutrients and bacteria. These consist of analyses of field measurements and laboratory determinations.

A two-level structure for advanced space power system automation

NASA Technical Reports Server (NTRS)

Loparo, Kenneth A.; Chankong, Vira

1990-01-01

The tasks to be carried out during the three-year project period are: (1) performing extensive simulation using existing mathematical models to build a specific knowledge base of the operating characteristics of space power systems; (2) carrying out the necessary basic research on hierarchical control structures, real-time quantitative algorithms, and decision-theoretic procedures; (3) developing a two-level automation scheme for fault detection and diagnosis, maintenance and restoration scheduling, and load management; and (4) testing and demonstration. The outlines of the proposed system structure that served as a master plan for this project, work accomplished, concluding remarks, and ideas for future work are also addressed.

NASA Communications Division (NASCOM) Tracking and Data Relay Satellite System (TDRSS) shuttle multiplexer-demultiplexer data system (MDM) and supporting items

NASA Technical Reports Server (NTRS)

New, S. R.

1981-01-01

The multiplexer-demultiplexer (MDM) project included the design, documentation, manufacture, and testing of three MDM Data Systems. The equipment is contained in 59 racks, and includes more than 3,000 circuit boards and 600 microprocessors. Spares, circuit card testers, a master set of programmable integrated circuits, and a program development system were included as deliverables. All three MDM's were installed, and were operationally tested. The systems performed well with no major problems. The progress and problems analysis, addresses schedule conformance, new technology, items awaiting government approval, and project conclusions are summarized. All contract modifications are described.

NASA Communications Division (NASCOM) Tracking and Data Relay Satellite System (TDRSS) shuttle multiplexer-demultiplexer data system (MDM) and supporting items

NASA Astrophysics Data System (ADS)

New, S. R.

1981-06-01

The multiplexer-demultiplexer (MDM) project included the design, documentation, manufacture, and testing of three MDM Data Systems. The equipment is contained in 59 racks, and includes more than 3,000 circuit boards and 600 microprocessors. Spares, circuit card testers, a master set of programmable integrated circuits, and a program development system were included as deliverables. All three MDM's were installed, and were operationally tested. The systems performed well with no major problems. The progress and problems analysis, addresses schedule conformance, new technology, items awaiting government approval, and project conclusions are summarized. All contract modifications are described.

The 30/20 GHz demonstration system SSUS-D/BSE

NASA Technical Reports Server (NTRS)

1981-01-01

The systems consisting of a 30/20 GHz communication satellite featuring a multiple fixed beam and scanning beam antenna, SS-TDMA, onboard processing and high power TWT's and IMPATT amplifiers, a trunking space-diversity Earth station, a customer premise system (CPS) portable Earth station and a Master Control Station. Hardware, software and personnel are included to build and launch one satellite and to carry on a two year experimentation and demonstration period of advanced Ka-band systems concepts and technology. Included are first level plans identifying all tasks, a schedule for system development and an assessment of critical technology and risk and a preliminary experiments plan.

Development of a laboratory prototype water quality monitoring system suitable for use in zero gravity

NASA Technical Reports Server (NTRS)

Misselhorn, J. E.; Witz, S.; Hartung, W. H.

1973-01-01

The development of a laboratory prototype water quality monitoring system for use in the evaluation of candidate water recovery systems and for study of techniques for measuring potability parameters is reported. Sensing techniques for monitoring of the most desirable parameters are reviewed in terms of their sensitivities and complexities, and their recommendations for sensing techniques are presented. Rationale for selection of those parameters to be monitored (pH, specific conductivity, Cr(+6), I2, total carbon, and bacteria) in a next generation water monitor is presented along with an estimate of flight system specifications. A master water monitor development schedule is included.

Subrandom methods for multidimensional nonuniform sampling.

PubMed

Worley, Bradley

2016-08-01

Methods of nonuniform sampling that utilize pseudorandom number sequences to select points from a weighted Nyquist grid are commonplace in biomolecular NMR studies, due to the beneficial incoherence introduced by pseudorandom sampling. However, these methods require the specification of a non-arbitrary seed number in order to initialize a pseudorandom number generator. Because the performance of pseudorandom sampling schedules can substantially vary based on seed number, this can complicate the task of routine data collection. Approaches such as jittered sampling and stochastic gap sampling are effective at reducing random seed dependence of nonuniform sampling schedules, but still require the specification of a seed number. This work formalizes the use of subrandom number sequences in nonuniform sampling as a means of seed-independent sampling, and compares the performance of three subrandom methods to their pseudorandom counterparts using commonly applied schedule performance metrics. Reconstruction results using experimental datasets are also provided to validate claims made using these performance metrics. Copyright © 2016 Elsevier Inc. All rights reserved.

Improving Ambulatory Saliva-Sampling Compliance in Pregnant Women: A Randomized Controlled Study

PubMed Central

Moeller, Julian; Lieb, Roselind; Meyer, Andrea H.; Loetscher, Katharina Quack; Krastel, Bettina; Meinlschmidt, Gunther

2014-01-01

Objective Noncompliance with scheduled ambulatory saliva sampling is common and has been associated with biased cortisol estimates in nonpregnant subjects. This study is the first to investigate in pregnant women strategies to improve ambulatory saliva-sampling compliance, and the association between sampling noncompliance and saliva cortisol estimates. Methods We instructed 64 pregnant women to collect eight scheduled saliva samples on two consecutive days each. Objective compliance with scheduled sampling times was assessed with a Medication Event Monitoring System and self-reported compliance with a paper-and-pencil diary. In a randomized controlled study, we estimated whether a disclosure intervention (informing women about objective compliance monitoring) and a reminder intervention (use of acoustical reminders) improved compliance. A mixed model analysis was used to estimate associations between women's objective compliance and their diurnal cortisol profiles, and between deviation from scheduled sampling and the cortisol concentration measured in the related sample. Results Self-reported compliance with a saliva-sampling protocol was 91%, and objective compliance was 70%. The disclosure intervention was associated with improved objective compliance (informed: 81%, noninformed: 60%), F(1,60)  = 17.64, p<0.001, but not the reminder intervention (reminders: 68%, without reminders: 72%), F(1,60)  = 0.78, p = 0.379. Furthermore, a woman's increased objective compliance was associated with a higher diurnal cortisol profile, F(2,64) = 8.22, p<0.001. Altered cortisol levels were observed in less objective compliant samples, F(1,705) = 7.38, p = 0.007, with delayed sampling associated with lower cortisol levels. Conclusions The results suggest that in pregnant women, objective noncompliance with scheduled ambulatory saliva sampling is common and is associated with biased cortisol estimates. To improve sampling compliance, results suggest informing women about objective compliance monitoring but discourage use of acoustical reminders. PMID:24465958

Sport commitment and participation in masters swimmers: the influence of coach and teammates.

PubMed

Santi, Giampaolo; Bruton, Adam; Pietrantoni, Luca; Mellalieu, Stephen

2014-01-01

This study investigated how coach and teammates influence masters athletes' sport commitment, and the effect of functional and obligatory commitments on participation in masters swimming. The sample consisted of 523 masters swimmers (330 males and 193 females) aged between 22 and 83 years (M = 39.00, SD = 10.42). A bi-dimensional commitment scale was used to measure commitment dimensions and perceived influence from social agents. Structural equation modelling analysis was conducted to evaluate the influence of social agents on functional and obligatory commitments, and the predictive capabilities of the two types of commitment towards sport participation. Support provided by coach and teammates increased functional commitment, constraints from these social agents determined higher obligatory commitment, and coach constraints negatively impacted functional commitment. In addition, both commitment types predicted training participation, with functional commitment increasing participation in team training sessions, and obligatory commitment increasing the hours of individual training. The findings suggest that in order to increase participation in masters swimming teams and reduce non-supervised training, coach and teammates should exhibit a supportive attitude and avoid over expectation.

33 CFR 159.317 - Sampling and reporting.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Sampling and reporting. 159.317... Operations § 159.317 Sampling and reporting. (a) The owner, operator, master or other person in charge of a.../Quality Control Plan (QA/QCP) accepted by the COTP for sampling and analysis of treated sewage and/or...

33 CFR 159.317 - Sampling and reporting.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Sampling and reporting. 159.317... Operations § 159.317 Sampling and reporting. (a) The owner, operator, master or other person in charge of a.../Quality Control Plan (QA/QCP) accepted by the COTP for sampling and analysis of treated sewage and/or...

Synchronization sampling method based on delta-sigma analog-digital converter for underwater towed array system.

PubMed

Jiang, Jia-Jia; Duan, Fa-Jie; Li, Yan-Chao; Hua, Xiang-Ning

2014-03-01

Synchronization sampling is very important in underwater towed array system where every acquisition node (AN) samples analog signals by its own analog-digital converter (ADC). In this paper, a simple and effective synchronization sampling method is proposed to ensure synchronized operation among different ANs of the underwater towed array system. We first present a master-slave synchronization sampling model, and then design a high accuracy phase-locked loop to synchronize all delta-sigma ADCs to a reference clock. However, when the master-slave synchronization sampling model is used, both the time-delay (TD) of messages traveling along the wired transmission medium and the jitter of the clocks will bring out synchronization sampling error (SSE). Therefore, a simple method is proposed to estimate and compensate the TD of the messages transmission, and then another effective method is presented to overcome the SSE caused by the jitter of the clocks. An experimental system with three ANs is set up, and the related experimental results verify the validity of the synchronization sampling method proposed in this paper.

Synchronization sampling method based on delta-sigma analog-digital converter for underwater towed array system

NASA Astrophysics Data System (ADS)

Jiang, Jia-Jia; Duan, Fa-Jie; Li, Yan-Chao; Hua, Xiang-Ning

2014-03-01

Synchronization sampling is very important in underwater towed array system where every acquisition node (AN) samples analog signals by its own analog-digital converter (ADC). In this paper, a simple and effective synchronization sampling method is proposed to ensure synchronized operation among different ANs of the underwater towed array system. We first present a master-slave synchronization sampling model, and then design a high accuracy phase-locked loop to synchronize all delta-sigma ADCs to a reference clock. However, when the master-slave synchronization sampling model is used, both the time-delay (TD) of messages traveling along the wired transmission medium and the jitter of the clocks will bring out synchronization sampling error (SSE). Therefore, a simple method is proposed to estimate and compensate the TD of the messages transmission, and then another effective method is presented to overcome the SSE caused by the jitter of the clocks. An experimental system with three ANs is set up, and the related experimental results verify the validity of the synchronization sampling method proposed in this paper.

Easily Processed Host-Guest Polymer Systems with High-Tg Characteristics (First-year Report)

DTIC Science & Technology

2012-05-01

manner such that the effective electro- optical coefficient is maximized. Unfortunately, relaxation of the chromophore in the host polymer leads to...polished stainless steel facing plates (0.25 in thickness, McMaster ) and window molds cut from aluminum stock (1 mm thickness, McMaster ). Both facing...plasticization from the chromophore. Both chromophores resulted in substantial red-shifted absorption compared to a sample prepared in virgin PMMA. We expect

Daily sodium and potassium excretion can be estimated by scheduled spot urine collections.

PubMed

Doenyas-Barak, Keren; Beberashvili, Ilia; Bar-Chaim, Adina; Averbukh, Zhan; Vogel, Ofir; Efrati, Shai

2015-01-01

The evaluation of sodium and potassium intake is part of the optimal management of hypertension, metabolic syndrome, renal stones, and other conditions. To date, no convenient method for its evaluation exists, as the gold standard method of 24-hour urine collection is cumbersome and often incorrectly performed, and methods that use spot or shorter collections are not accurate enough to replace the gold standard. The aim of this study was to evaluate the correlation and agreement between a new method that uses multiple-scheduled spot urine collection and the gold standard method of 24-hour urine collection. The urine sodium or potassium to creatinine ratios were determined for four scheduled spot urine samples. The mean ratios of the four spot samples and the ratios of each of the single spot samples were corrected for estimated creatinine excretion and compared to the gold standard. A significant linear correlation was demonstrated between the 24-hour urinary solute excretions and estimated excretion evaluated by any of the scheduled spot urine samples. The correlation of the mean of the four spots was better than for any of the single spots. Bland-Altman plots showed that the differences between these measurements were within the limits of agreement. Four scheduled spot urine samples can be used as a convenient method for estimation of 24-hour sodium or potassium excretion. © 2015 S. Karger AG, Basel.

46 CFR 153.935a - Storage of cargo samples.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Storage of cargo samples. 153.935a Section 153.935a Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS... § 153.935a Storage of cargo samples. (a) The master shall make sure that any cargo samples are stored in...

A Comparison of Techniques for Scheduling Earth-Observing Satellites

NASA Technical Reports Server (NTRS)

Globus, Al; Crawford, James; Lohn, Jason; Pryor, Anna

2004-01-01

Scheduling observations by coordinated fleets of Earth Observing Satellites (EOS) involves large search spaces, complex constraints and poorly understood bottlenecks, conditions where evolutionary and related algorithms are often effective. However, there are many such algorithms and the best one to use is not clear. Here we compare multiple variants of the genetic algorithm: stochastic hill climbing, simulated annealing, squeaky wheel optimization and iterated sampling on ten realistically-sized EOS scheduling problems. Schedules are represented by a permutation (non-temperal ordering) of the observation requests. A simple deterministic scheduler assigns times and resources to each observation request in the order indicated by the permutation, discarding those that violate the constraints created by previously scheduled observations. Simulated annealing performs best. Random mutation outperform a more 'intelligent' mutator. Furthermore, the best mutator, by a small margin, was a novel approach we call temperature dependent random sampling that makes large changes in the early stages of evolution and smaller changes towards the end of search.

A case study: the initiative to improve RN scheduling at Hamilton Health Sciences.

PubMed

Wallace, Laurel-Anne; Pierson, Sharon

2008-01-01

In 2003, Hamilton Health Sciences embarked on an initiative to improve and standardize nursing schedules and scheduling practices. The scheduling project was one of several initiatives undertaken by a corporate-wide Nursing Resource Group established to enhance the work environment and patient care and to ensure appropriate utilization of nursing resources across the organization's five hospitals. This article focuses on major activities undertaken in the scheduling initiative. The step-by-step approach described, plus examples of the scheduling resources developed and samples of extended-tour schedules, will all provide insight, potential strategies and practical help for nursing administrators, human resources (HR) personnel and others interested in improving nurse scheduling.

Analysis of phosphorus trends and evaluation of sampling designs in the Quinebaug River Basin, Connecticut

USGS Publications Warehouse

Todd Trench, Elaine C.

2004-01-01

A time-series analysis approach developed by the U.S. Geological Survey was used to analyze trends in total phosphorus and evaluate optimal sampling designs for future trend detection, using long-term data for two water-quality monitoring stations on the Quinebaug River in eastern Connecticut. Trend-analysis results for selected periods of record during 1971?2001 indicate that concentrations of total phosphorus in the Quinebaug River have varied over time, but have decreased significantly since the 1970s and 1980s. Total phosphorus concentrations at both stations increased in the late 1990s and early 2000s, but were still substantially lower than historical levels. Drainage areas for both stations are primarily forested, but water quality at both stations is affected by point discharges from municipal wastewater-treatment facilities. Various designs with sampling frequencies ranging from 4 to 11 samples per year were compared to the trend-detection power of the monthly (12-sample) design to determine the most efficient configuration of months to sample for a given annual sampling frequency. Results from this evaluation indicate that the current (2004) 8-sample schedule for the two Quinebaug stations, with monthly sampling from May to September and bimonthly sampling for the remainder of the year, is not the most efficient 8-sample design for future detection of trends in total phosphorus. Optimal sampling schedules for the two stations differ, but in both cases, trend-detection power generally is greater among 8-sample designs that include monthly sampling in fall and winter. Sampling designs with fewer than 8 samples per year generally provide a low level of probability for detection of trends in total phosphorus. Managers may determine an acceptable level of probability for trend detection within the context of the multiple objectives of the state?s water-quality management program and the scientific understanding of the watersheds in question. Managers may identify a threshold of probability for trend detection that is high enough to justify the agency?s investment in the water-quality sampling program. Results from an analysis of optimal sampling designs can provide an important component of information for the decision-making process in which sampling schedules are periodically reviewed and revised. Results from the study described in this report and previous studies indicate that optimal sampling schedules for trend detection may differ substantially for different stations and constituents. A more comprehensive statewide evaluation of sampling schedules for key stations and constituents could provide useful information for any redesign of the schedule for water-quality monitoring in the Quinebaug River Basin and elsewhere in the state.

Implementation of hospital examination reservation system using data mining technique.

PubMed

Cha, Hyo Soung; Yoon, Tae Sik; Ryu, Ki Chung; Shin, Il Won; Choe, Yang Hyo; Lee, Kyoung Yong; Lee, Jae Dong; Ryu, Keun Ho; Chung, Seung Hyun

2015-04-01

New methods for obtaining appropriate information for users have been attempted with the development of information technology and the Internet. Among such methods, the demand for systems and services that can improve patient satisfaction has increased in hospital care environments. In this paper, we proposed the Hospital Exam Reservation System (HERS), which uses the data mining method. First, we focused on carrying clinical exam data and finding the optimal schedule for generating rules using the multi-examination pattern-mining algorithm. Then, HERS was applied by a rule master and recommending system with an exam log. Finally, HERS was designed as a user-friendly interface. HERS has been applied at the National Cancer Center in Korea since June 2014. As the number of scheduled exams increased, the time required to schedule more than a single condition decreased (from 398.67% to 168.67% and from 448.49% to 188.49%; p < 0.0001). As the number of tests increased, the difference between HERS and non-HERS increased (from 0.18 days to 0.81 days). It was possible to expand the efficiency of HERS studies using mining technology in not only exam reservations, but also the medical environment. The proposed system based on doctor prescription removes exams that were not executed in order to improve recommendation accuracy. In addition, we expect HERS to become an effective system in various medical environments.

A Linear Viscoelastic Model Calibration of Sylgard 184.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Long, Kevin Nicholas; Brown, Judith Alice

2017-04-01

We calibrate a linear thermoviscoelastic model for solid Sylgard 184 (90-10 formulation), a lightly cross-linked, highly flexible isotropic elastomer for use both in Sierra / Solid Mechanics via the Universal Polymer Model as well as in Sierra / Structural Dynamics (Salinas) for use as an isotropic viscoelastic material. Material inputs for the calibration in both codes are provided. The frequency domain master curve of oscillatory shear was obtained from a report from Los Alamos National Laboratory (LANL). However, because the form of that data is different from the constitutive models in Sierra, we also present the mapping of the LANLmore » data onto Sandia’s constitutive models. Finally, blind predictions of cyclic tension and compression out to moderate strains of 40 and 20% respectively are compared with Sandia’s legacy cure schedule material. Although the strain rate of the data is unknown, the linear thermoviscoelastic model accurately predicts the experiments out to moderate strains for the slower strain rates, which is consistent with the expectation that quasistatic test procedures were likely followed. This good agreement comes despite the different cure schedules between the Sandia and LANL data.« less

Fine grained event processing on HPCs with the ATLAS Yoda system

NASA Astrophysics Data System (ADS)

Calafiura, Paolo; De, Kaushik; Guan, Wen; Maeno, Tadashi; Nilsson, Paul; Oleynik, Danila; Panitkin, Sergey; Tsulaia, Vakhtang; Van Gemmeren, Peter; Wenaus, Torre

2015-12-01

High performance computing facilities present unique challenges and opportunities for HEP event processing. The massive scale of many HPC systems means that fractionally small utilization can yield large returns in processing throughput. Parallel applications which can dynamically and efficiently fill any scheduling opportunities the resource presents benefit both the facility (maximal utilization) and the (compute-limited) science. The ATLAS Yoda system provides this capability to HEP-like event processing applications by implementing event-level processing in an MPI-based master-client model that integrates seamlessly with the more broadly scoped ATLAS Event Service. Fine grained, event level work assignments are intelligently dispatched to parallel workers to sustain full utilization on all cores, with outputs streamed off to destination object stores in near real time with similarly fine granularity, such that processing can proceed until termination with full utilization. The system offers the efficiency and scheduling flexibility of preemption without requiring the application actually support or employ check-pointing. We will present the new Yoda system, its motivations, architecture, implementation, and applications in ATLAS data processing at several US HPC centers.

The Sampling Issues in Quantitative Research

ERIC Educational Resources Information Center

Delice, Ali

2010-01-01

A concern for generalization dominates quantitative research. For generalizability and repeatability, identification of sample size is essential. The present study investigates 90 qualitative master's theses submitted for the Primary and Secondary School Science and Mathematics Education Departments, Mathematic Education Discipline in 10…

Scheduling algorithm for mission planning and logistics evaluation users' guide

NASA Technical Reports Server (NTRS)

Chang, H.; Williams, J. M.

1976-01-01

The scheduling algorithm for mission planning and logistics evaluation (SAMPLE) program is a mission planning tool composed of three subsystems; the mission payloads subsystem (MPLS), which generates a list of feasible combinations from a payload model for a given calendar year; GREEDY, which is a heuristic model used to find the best traffic model; and the operations simulation and resources scheduling subsystem (OSARS), which determines traffic model feasibility for available resources. The SAMPLE provides the user with options to allow the execution of MPLS, GREEDY, GREEDY-OSARS, or MPLS-GREEDY-OSARS.

Effect of Sampling Schedule on Pharmacokinetic Parameter Estimates of Promethazine in Astronauts

NASA Technical Reports Server (NTRS)

Boyd, Jason L.; Wang, Zuwei; Putcha, Lakshmi

2005-01-01

Six astronauts on the Shuttle Transport System (STS) participated in an investigation on the pharmacokinetics of promethazine (PMZ), a medication used for the treatment of space motion sickness (SMS) during flight. Each crewmember completed the protocol once during flight and repeated thirty days after returned to Earth. Saliva samples were collected at scheduled times for 72 h after PMZ administration; more frequent samples were collected on the ground than during flight owing to schedule constraints in flight. PMZ concentrations in saliva were determined by a liquid chromatographic/mass spectrometric (LC-MS) assay and pharmacokinetic parameters (PKPs) were calculated using actual flight and ground-based data sets and using time-matched sampling schedule on ground to that during flight. Volume of distribution (V(sub c)) and clearance (Cl(sub s),) decreased during flight compared to that from time-matched ground data set; however, Cl(sub s) and V(sub c) estimates were higher for all subjects when partial ground data sets were used for analysis. Area under the curve (AUC) normalized with administered dose was similar in flight and partial ground data; however AUC was significantly lower using time-matched sampling compared with the full data set on ground. Half life (t(sub 1/2)) was longest during flight, shorter with matched-sampling schedule on ground and shortest when complete data set from ground was used. Maximum concentration (C(sub max)), time for C(sub max), (t(sub max)), parameters of drug absorption, depicted a similar trend with lowest and longest respectively, during flight, lower with time-matched ground data and highest and shortest with full ground data.

Effect of sampling schedule on pharmacokinetic parameter estimates of promethazine in astronauts

NASA Astrophysics Data System (ADS)

Boyd, Jason L.; Wang, Zuwei; Putcha, Lakshmi

2005-08-01

Six astronauts on the Shuttle Transport System (STS) participated in an investigation on the pharmacokinetics of promethazine (PMZ), a medication used for the treatment of space motion sickness (SMS) during flight. Each crewmember completed the protocol once during flight and repeated thirty days after returned to Earth. Saliva samples were collected at scheduled times for 72 h after PMZ administration; more frequent samples were collected on the ground than during flight owing to schedule constraints in flight. PMZ concentrations in saliva were determined by a liquid chromatographic/mass spectrometric (LC-MS) assay and pharmacokinetic parameters (PKPs) were calculated using actual flight and ground-based data sets and using time-matched sampling schedule on ground to that during flight. Volume of distribution (Vc) and clearance (Cls) decreased during flight compared to that from time-matched ground data set; however, ClS and Vc estimates were higher for all subjects when partial ground data sets were used for analysis. Area under the curve (AUC) normalized with administered dose was similar in flight and partial ground data; however AUC was significantly lower using time-matched sampling compared with the full data set on ground. Half life (t1/2) was longest during flight, shorter with matched-sampling schedule on ground and shortest when complete data set from ground was used. Maximum concentration (Cmax), time for Cmax (tmax), parameters of drug absorption, depicted a similar trend with lowest and longest respectively, during flight, lower with time- matched ground data and highest and shortest with full ground data.

Scheduling Algorithm for Mission Planning and Logistics Evaluation (SAMPLE). Volume 2: Mission payloads subsystem description

NASA Technical Reports Server (NTRS)

Dupnick, E.; Wiggins, D.

1980-01-01

The scheduling algorithm for mission planning and logistics evaluation (SAMPLE) is presented. Two major subsystems are included: The mission payloads program; and the set covering program. Formats and parameter definitions for the payload data set (payload model), feasible combination file, and traffic model are documented.

40 CFR 86.135-90 - Dynamometer procedure.

Code of Federal Regulations, 2012 CFR

2012-07-01

... startup and operation over the first 505 seconds of the driving schedule complete the hot start test. The... 505 seconds of the driving schedule complete the hot start test. The exhaust emissions are diluted... over the prescribed driving schedule may be performed at test point, provided an emission sample is not...

40 CFR 86.135-90 - Dynamometer procedure.

Code of Federal Regulations, 2013 CFR

2013-07-01

... startup and operation over the first 505 seconds of the driving schedule complete the hot start test. The... 505 seconds of the driving schedule complete the hot start test. The exhaust emissions are diluted... over the prescribed driving schedule may be performed at test point, provided an emission sample is not...

16 CFR 1203.13 - Test schedule.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Test schedule. 1203.13 Section 1203.13... STANDARD FOR BICYCLE HELMETS The Standard § 1203.13 Test schedule. (a) Helmet sample 1 of the set of eight... environments, respectively) shall be tested in accordance with the dynamic retention system strength test at...

Observing the Use of Tactile Schedules

ERIC Educational Resources Information Center

Aasen, Gro; Naerland, Terje

2014-01-01

This article explores the use of tactile schedules in a heterogeneous sample of children with congenital blindness and varying degrees of additional disabilities. Basic conditions for the use of tactile schedules are proposed and discussed. Child behaviour indicative of some particular functions that can be attained with the use of tactile…

Clinical Study of the 3D-Master Color System among the Spanish Population.

PubMed

Gómez-Polo, Cristina; Gómez-Polo, Miguel; Martínez Vázquez de Parga, Juan Antonio; Celemín-Viñuela, Alicia

2017-01-12

To study whether the shades of the 3D-Master System were grouped and represented in the chromatic space according to the three-color coordinates of value, chroma, and hue. Maxillary central incisor color was measured on tooth surfaces through the Easyshade Compact spectrophotometer using 1361 participants aged between 16 and 89. The natural (not bleached teeth) color of the middle thirds was registered in the 3D-Master System nomenclature and in the CIELCh system. Principal component analysis and cluster analysis were applied. 75 colors of the 3D-Master System were found. The statistical analysis revealed the existence of 5 cluster groups. The centroid, the average of the 75 samples, in relation to lightness (L*) was 74.64, 22.87 for chroma (C*), and 88.85 for hue (h*). All of the clusters, except cluster 3, showed significant statistical differences with the centroid for the three-color coordinates (p <0.001). The results of this study indicated that 75 shades in the 3D-Master System were grouped into 5 clusters following coordinates L*, C*, and h* resulting from the dental spectrophotometer Vita Easyshade compact. The shades that composed each cluster did not belong to the same lightness color dimension groups. There was no special uniform chromatic distribution among the colors of the 3D-Master System. © 2017 by the American College of Prosthodontists.

Evaluation of DNA extraction methods for Bacillus anthracis spores isolated from spiked food samples.

PubMed

Thomas, M C; Shields, M J; Hahn, K R; Janzen, T W; Goji, N; Amoako, K K

2013-07-01

Nine commercial DNA extraction kits were evaluated for the isolation of DNA from 10-fold serial dilutions of Bacillus anthracis spores using quantitative real-time PCR (qPCR). The three kits determined by qPCR to yield the most sensitive and consistent detection (Epicenter MasterPure Gram Positive; MoBio PowerFood; ABI PrepSeq) were subsequently tested for their ability to isolate DNA from trace amounts of B. anthracis spores (approx. 6·5 × 10(1) and 1·3 × 10(2)  CFU in 25 ml or 50 g of food sample) spiked into complex food samples including apple juice, ham, whole milk and bagged salad and recovered with immunomagnetic separation (IMS). The MasterPure kit effectively and consistently isolated DNA from low amounts of B. anthracis spores captured from food samples. Detection was achieved from apple juice, ham, whole milk and bagged salad from as few as 65 ± 14, 68 ± 8, 66 ± 4 and 52 ± 16 CFU, respectively, and IMS samples were demonstrated to be free of PCR inhibitors. Detection of B. anthracis spores isolated from food by IMS differs substantially between commercial DNA extraction kits; however, sensitive results can be obtained with the MasterPure Gram Positive kit. The extraction protocol identified herein combined with IMS is novel for B. anthracis and allows detection of low levels of B. anthracis spores from contaminated food samples. © Her Majesty the Queen in Right of Canada [2013]. Reproduced with the permission of the Canadian Food Inspection Agency.

A Descriptive Study of Military Police Officer Graduates of the Master of Arts Program of Sam Houston State University

DTIC Science & Technology

1991-12-07

are male and the positions in military corrections are male dominated. The racial make-up was overwhelmingly white with only 5.4% of the respondents...sample was middle age with 53.6.% thirty to thirty-three years of age. B. The graduates were all male and the racial make-up was overwhelmingly while...Attempt at Decriminalization of Deviant Behavior. Unpublished master’s thesis, Sam Houston State University, Huntsville, Texas. Durian, Ronald S. (1971

Pigeons' Choices between Fixed-Interval and Random-Interval Schedules: Utility of Variability?

ERIC Educational Resources Information Center

Andrzejewski, Matthew E.; Cardinal, Claudia D.; Field, Douglas P.; Flannery, Barbara A.; Johnson, Michael; Bailey, Kathleen; Hineline, Philip N.

2005-01-01

Pigeons' choosing between fixed-interval and random-interval schedules of reinforcement was investigated in three experiments using a discrete-trial procedure. In all three experiments, the random-interval schedule was generated by sampling a probability distribution at an interval (and in multiples of the interval) equal to that of the…

Static-dynamic hybrid communication scheduling and control co-design for networked control systems.

PubMed

Wen, Shixi; Guo, Ge

2017-11-01

In this paper, the static-dynamic hybrid communication scheduling and control co-design is proposed for the networked control systems (NCSs) to solve the capacity limitation of the wireless communication network. The analytical most regular binary sequences (MRBSs) are used as the communication scheduling function for NCSs. When the communication conflicts yielded in the binary sequence MRBSs, a dynamic scheduling strategy is proposed to on-line reallocate the medium access status for each plant. Under such static-dynamic hybrid scheduling policy, plants in NCSs are described as the non-uniform sampled-control systems, whose controller have a group of controller gains and switch according to the sampling interval yielded by the binary sequence. A useful communication scheduling and control co-design framework is proposed for the NCSs to simultaneously decide the controller gains and the parameters used to generate the communication sequences MRBS. Numerical example and realistic example are respectively given to demonstrate the effectiveness of the proposed co-design method. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Homework schedule: an important factor associated with shorter sleep duration among Chinese school-aged children.

PubMed

Li, Shenghui; Yang, Qian; Chen, Zhe; Jin, Xingming; Jiang, Fan; Shen, Xiaoming

2014-09-03

This study was designed to examine the hypothesis that homework schedule has adverse impacts on Chinese children's sleep-wake habits and sleep duration. A random sample of 19,299 children aged 5.08 to 11.99 years old participated in a large, cross-sectional survey. A parent-administered questionnaire was completed to quantify children's homework schedule and sleep behaviors. Generally, it was demonstrated that more homework schedule was significantly associated with later bedtime, later wake time, and shorter sleep duration. Among all sleep variables, bedtime and sleep duration during weekdays appeared to be most affected by homework schedule, especially homework schedule during weekdays.

Examining the Factor Structure of the Positive and Negative Affect Schedule (PANAS) in a Multiethnic Sample of Adolescents

ERIC Educational Resources Information Center

Villodas, Feion; Villodas, Miguel T.; Roesch, Scott

2011-01-01

The psychometric properties of the Positive and Negative Affect Schedule were examined in a multiethnic sample of adolescents. Results from confirmatory factor analyses indicated that the original two-factor model did not adequately fit the data. Exploratory factor analyses revealed that four items were not pure markers of the factors. (Contains 1…

A Comparison of Five Reinforcement Schedules for Use in Contingency Management-Based Treatment of Methamphetamine Abuse

ERIC Educational Resources Information Center

Roll, John M.; Huber, Alice; Sodano, Ruthlyn; Chudzynski, Joy E.; Moynier, Eugene; Shoptaw, Steve

2006-01-01

One variation of contingency management involves providing vouchers with monetary value for the provision of a biological sample indicating no recent drug use. These vouchers can be exchanged for goods or services. The schedule with which the vouchers are disbursed has been studied and results suggest that those schedules that incorporate…

Optimal designs for population pharmacokinetic studies of the partner drugs co-administered with artemisinin derivatives in patients with uncomplicated falciparum malaria.

PubMed

Jamsen, Kris M; Duffull, Stephen B; Tarning, Joel; Lindegardh, Niklas; White, Nicholas J; Simpson, Julie A

2012-07-11

Artemisinin-based combination therapy (ACT) is currently recommended as first-line treatment for uncomplicated malaria, but of concern, it has been observed that the effectiveness of the main artemisinin derivative, artesunate, has been diminished due to parasite resistance. This reduction in effect highlights the importance of the partner drugs in ACT and provides motivation to gain more knowledge of their pharmacokinetic (PK) properties via population PK studies. Optimal design methodology has been developed for population PK studies, which analytically determines a sampling schedule that is clinically feasible and yields precise estimation of model parameters. In this work, optimal design methodology was used to determine sampling designs for typical future population PK studies of the partner drugs (mefloquine, lumefantrine, piperaquine and amodiaquine) co-administered with artemisinin derivatives. The optimal designs were determined using freely available software and were based on structural PK models from the literature and the key specifications of 100 patients with five samples per patient, with one sample taken on the seventh day of treatment. The derived optimal designs were then evaluated via a simulation-estimation procedure. For all partner drugs, designs consisting of two sampling schedules (50 patients per schedule) with five samples per patient resulted in acceptable precision of the model parameter estimates. The sampling schedules proposed in this paper should be considered in future population pharmacokinetic studies where intensive sampling over many days or weeks of follow-up is not possible due to either ethical, logistic or economical reasons.

Longitudinal studies in clinical psychoendocrinology: methodology.

PubMed

Money, J

1986-02-01

There are five universal exigencies of being human, against which a person's existence can be evaluated: pairbondage, troopbondage, abidance, ycleptance, and foredoomance. They constitute a template from which a standardized agenda or schedule of inquiry is generated, as needed, for a particular research investigation. The schedule of inquiry is painstakingly designed ahead of time so as to ensure coverage of all the variables relevant to a particular study. For economy of expense and effort, subjects conclude their own prior interviews by summarizing it on tape, with the interviewer making a written record, verbatim, of what will become subheadings in the transcript. Inquiry progresses from an open-ended to a forced choice interrogatory. Topics in the public domain open the way to inquiry on personally sensitive issues. So also do parables drawn from actual cases and used as personalized narrative projective tests. A cumulative record, covering as many as 25 years, is indexed so that relevant material can be located, abstracted, and classified for any particular study. A jury of two or more then uses the abstracted data to fill out a prepared data schedule, using its own standardized scoring or rating criteria. By contrast, an ordinary questionnaire uses standardized questions, and each subject applies his or her own unstandardized scoring or rating criteria in answering them. In the final step, the jury's ratings are tabulated on a master chart that consolidates the scores of a group of subjects and controls, ready for statistical analysis.

Managing Small Spacecraft Projects: Less is Not Easier

NASA Technical Reports Server (NTRS)

Barley, Bryan; Newhouse, Marilyn

2012-01-01

Managing small, low cost missions (class C or D) is not necessarily easier than managing a full flagship mission. Yet, small missions are typically considered easier to manage and used as a training ground for developing the next generation of project managers. While limited resources can be a problem for small missions, in reality most of the issues inherent in managing small projects are not the direct result of limited resources. Instead, problems encountered by managers of small spacecraft missions often derive from 1) the perception that managing small projects is easier if something is easier it needs less rigor and formality in execution, 2) the perception that limited resources necessitate or validate omitting standard management practices, 3) less stringent or unclear guidelines or policies for small projects, and 4) stakeholder expectations that are not consistent with the size and nature of the project. For example, the size of a project is sometimes used to justify not building a full, detailed integrated master schedule. However, while a small schedule slip may not be a problem for a large mission, it can indicate a serious problem for a small mission with a short development phase, highlighting the importance of the schedule for early identification of potential issues. Likewise, stakeholders may accept a higher risk posture early in the definition of a low-cost mission, but as launch approaches this acceptance may change. This presentation discusses these common misconceptions about managing small, low cost missions, the problems that can result, and possible solutions.

A Comparative Analysis of Master Casts Obtained using Different Surface Treatments on Impression Copings for Single Tooth Implant Replacement -An In vitro Study.

PubMed

Abrol, Surbhi; Nagpal, Archana; Kaur, Rupandeep; Verma, Ramit; Katna, Vishal; Gupt, Parikshit

2017-08-01

Minor rotation of impression coping secured in the impression is an avoidable error that needs to be minimized to ensure precise positioning of implant analog in master cast. The aim of the study was to compare the precision in obtaining master casts by improving the stability of impression copings in the impression with the use of tray adhesive along various surface treatments to increase surface area and by mechanical locking. A total of 60 samples were made (15 samples for each group). A total of 15 samples for Group I were prepared with untreated impression copings, 15 samples for Group II with impression copings treated and modified by application of tray adhesive only. Group III includes 15 samples which were fabricated with impression copings modified by making four vertical grooves on surface of impression coping and coated with adhesive. Group IV had 15 samples which were fabricated with impression copings sandblasted with 50 μm aluminum oxide powder and coated with adhesive. Profile projector was used to evaluate the rotational accuracy of the implant analogs by comparing Molar Implant Angle (MIA) and Premolar Implant Angle (PIA) of test samples with reference model. One-way ANOVA and Student t-test were used to analyze the data. One-way ANOVA didn't show any significant differences for both MIA and PIA between the Groups I, II, III and IV. Student's unpaired t-test revealed no significant difference in the mean MIA and mean PIA. Conclusion: Though results were statistically non-significant, all types of surface treatments of the impression copings showed more accurate transfer than those with no treatment. Sandblasted and adhesive coated impression copings showed minimum amount of rotation followed by those with vertical slots and adhesive coated impression copings.

Study of the most frequent natural tooth colors in the Spanish population using spectrophotometry

PubMed Central

2015-01-01

PURPOSE To identify the most frequent natural tooth colors using the Easyshade Compact (Vita -Zahnfabrik) spectrophotometer on a sample of the Spanish population according to the 3D Master System. MATERIALS AND METHODS The middle third of the facial surface of natural maxillary central incisors was measured with an Easyshade Compact spectrophotometer (Vita Zahnfabrik) in 1361 Caucasian Spanish participants aged between 16 and 89 years. Natural tooth color was recorded using the 3D Master System nomenclature. The program used for the present descriptive statistical analysis of the results was SAS 9.1.3. RESULTS The results show that the most frequent dental color in the total sample studied is 3M1 (7.05%), followed by the intermediate shade 1M1.5 (6.91%) and 2L1.5 (6.02%). CONCLUSION According to the research methodology used, and taking into account the limitations of this study, it can be proposed that the most frequent color among the Spanish population is 3M1; the most common lightness group is 2; the most frequent hue group according to the 3D Master System is M and the most frequent chroma group is 1.5. PMID:26816571

Planetary Sciences practical experiences at the Master level with small telescopes

NASA Astrophysics Data System (ADS)

Sanchez-Lavega, A.; Perez-Hoyos, S.; del Rio-Gaztelurrutia, T.; Hueso, R.; Ordonez Etxeberria, I.; Rojas, J. F.

2016-12-01

The Master in Space Science and Technology of the Basque Country University UPV/EHU in Bilbao (Spain) has been taught during 7 years (A. Sanchez-Lavega et al., Eur. J. of Eng. Education. 2014). Along the different courses, a series of practical observations and studies of planetary sciences have been conducted with Master students, using telescopes with diameters in the range 28-50 cm pertaining to the Aula EspaZio Gela Observatory (http://www.ehu.eus/aula-espazio/presentacion.html). Simple instrumentation (cameras and a spectrograph) have been employed to study planetary atmospheres (dynamics and cloud structure) and orbital mechanics using the Galilean satellites. Here we present a sample of these studies, which have lead to publications in refereed journals and have been presented at different meetings with the coauthoring of the students. Plans for the future include involving the master students in high-resolution observations of Solar System planets using a remote controlled 36 cm telescope at the Calar Alto observatory in Southern Spain (separated 1000 km from the teaching facilities in Bilbao).

A Psychometric Analysis of the Positive and Negative Affect Schedule for Children-Parent Version in a School Sample

ERIC Educational Resources Information Center

Ebesutani, Chad; Okamura, Kelsie; Higa-McMillan, Charmaine; Chorpita, Bruce F.

2011-01-01

The current study was the 1st to examine the psychometric properties of the Positive and Negative Affect Schedule for Children-Parent Version (PANAS-C-P) using a large school-based sample of children and adolescents ages 8 to 18 (N = 606). Confirmatory factor analysis supported a 2-factor (correlated) model of positive affect (PA) and negative…

Reliability of conventional shade guides in teeth color determination.

PubMed

Todorović, Ana; Todorović, Aleksandar; Gostović, Aleksandra Spadijer; Lazić, Vojkan; Milicić, Biljana; Djurisić, Slobodan

2013-10-01

Color matching in prosthodontic therapy is a very important task because it influences the esthetic value of dental restorations. Visual shade matching represents the most frequently applied method in clinical practice. Instrumental measurements provide objective and quantified data in color assessment of natural teeth and restorations. In instrumental shade analysis, the goal is to achieve the smallest deltaE value possible, indicating the most accurate shade match. The aim of this study was to evaluate the reliability of commercially available ceramic shade guides. VITA Easyshade spectrophotometer (VITA, Germany) was used for instrumental color determination. Utilizing this device, color samples of ten VITA Classical and ten VITA 3D - Master shade guides were analyzed. Each color sample from all shade guides was measured three times and the basic parameters of color quality were examined: deltaL, deltaC, deltaH, deltaE, deltaElc. Based on these parameters spectrophotometer marks the shade matching as good, fair or adjust. After performing 1,248 measurements of ceramic color samples, frequency of evaluations adjust, fair and good were statistically significantly different between VITA Classical and VITA 3D Master shade guides (p = 0.002). There were 27.1% cases scored as adjust, 66.3% as fair and 6.7% as good. In VITA 3D - Master shade guides 30.9% cases were evaluated as adjust, 66.4% as fair and 2.7% cases as good. Color samples from different shade guides, produced by the same manufacturer, show variability in basic color parameters, which once again proves the lack of precision and nonuniformity of the conventional method.

Sidescan-sonar imagery, multibeam bathymetry, and surficial geologic interpretations of the sea floor in Rhode Island Sound, off Sakonnet Point, Rhode Island

USGS Publications Warehouse

McMullen, Katherine Y.; Poppe, Lawrence J.; Twomey, Erin R.; Danforth, William W.; Haupt, Todd A.; Crocker, James M.

2007-01-01

The U.S. Geological Survey (USGS) is working with the National Oceanic and Atmospheric Administration (NOAA) to interpret the surficial geology in estuaries and sounds along the northeastern coast of the United States. This report interprets the area covered by NOAA Survey H11320, about 72 km² of sea floor in eastern Rhode Island Sound (RIS), located about 8 km south of Sakonnet Point, Rhode Island (fig. 1). Previous work in RIS includes studies of both sea-floor processes and subsurface geologic framework. McMaster (1960) mapped surficial sediment samples in Narragansett Bay and RIS and McMaster and others (1968) conducted a seismic-reflection survey in Block Island Sound and RIS. O'Hara and Oldale (1980) collected seismic-reflection profiles, sidescan-sonar data, and vibracores in eastern RIS (fig. 2). They interpreted the geologic history, assessed sand and gravel resources, and evaluated the mining impact of these resources. McMaster's (1960) interpretation of the surficial sediment within this study area consisted of sand with several isolated areas of gravel. Several other sediment samples were previously obtained within the study area: three National Oceanographic Data Center (NODC) dredge samples from 1942 consisted of sand and one National Ocean Service (NOS) sample from 1939 was rocky (fig. 2; Poppe and others, 2003). The purpose of this report is to define the sea-floor morphology and sedimentary environments and interpret processes occurring on the sea floor using sidescan-sonar imagery, multibeam bathymetry, and historic seismic-reflection profiles.

Health assessment for Master Disposal Service Landfill, Waukesha County, Brookfield, Wisconsin, Region 5. CERCLIS No. WID980820070. Preliminary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1988-12-10

The Master Disposal Service Landfill is listed on the National Priorities List. The site is located on the western edge of Brookfield in Waukesha County, Wisconsin. From 1962 to 1982, Master Disposal Service, Inc. operated a 40-acre landfill and filled a 26-acre wetland area by accepting in excess of 1.5 million gallons of industrial wastes. The wastes included solvents, paint products, adhesives, oils, and foundry wastes. State sampling established that ground water near the site is contaminated by chromium, lead, phenols, and PCBs. Based on the available information, the site is considered to be of potential public health concern becausemore » of the risk to human health caused by the possibility of exposure to hazardous substances via contaminated ground water, surface water, soil and air.« less

Solving the master equation without kinetic Monte Carlo: Tensor train approximations for a CO oxidation model

NASA Astrophysics Data System (ADS)

Gelß, Patrick; Matera, Sebastian; Schütte, Christof

2016-06-01

In multiscale modeling of heterogeneous catalytic processes, one crucial point is the solution of a Markovian master equation describing the stochastic reaction kinetics. Usually, this is too high-dimensional to be solved with standard numerical techniques and one has to rely on sampling approaches based on the kinetic Monte Carlo method. In this study we break the curse of dimensionality for the direct solution of the Markovian master equation by exploiting the Tensor Train Format for this purpose. The performance of the approach is demonstrated on a first principles based, reduced model for the CO oxidation on the RuO2(110) surface. We investigate the complexity for increasing system size and for various reaction conditions. The advantage over the stochastic simulation approach is illustrated by a problem with increased stiffness.

Feasibility study for the construction of a new LNG receiving terminal. Turkey. Volume 1. Export trade information. [LNG (liquified natural gas)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-06-01

The report was prepared by The M. W. Kellogg Co. for BOTAS Petroleum Pipeline Corporation of Ankara, Turkey. The study was undertaken to evaluate the cost and economics of constructing a second liquified natural gas (LNG) terminal in Turkey to meet future requirements for natural gas. Volume 1 is divided into the following sections: (1) Introduction; (2) Summary and Conclusions; (3) Design Basis; (4) Site Evaluation; (5) LNG Terminal Design; (6) Major Equipment and Instrumentation; (7) Marine Operations; (8) Safety Considerations; (9) Environmental Review; (10) Preliminary Project Execution Strategy; (11) Cost Estimates; (12) Project Master Schedule; (13) Economic Analysis; (14)more » Financing; (15) Future Work.« less

SuperState: a computer program for the control of operant behavioral experimentation.

PubMed

Zhang, Fuqiang

2006-09-15

Operant behavioral researches require precise control of experimental devices for delivering stimuli and monitoring behavioral responses. The author developed a software solution named SuperState for controlling hardware devices and running reinforcement schedules. The Microsoft Windows compatible software was written by use of an object-oriented programming language Borland Delphi 5.0, which has simplified the programming of the application. SuperState is a stand-alone easy-to-use green software, without the need for the experimenter to master any scripting languages. It features: (1) control of multiple operant cages running independent reinforcement schedules; (2) enough cage devices (16 digital inputs and 16 digital outputs for each cage) suitable for the need of most operant behavioral equipments; (3) control of most standard ISA-type digital interface cards including Med-Associates Super-port cards and a PCI-type card AC6412, and highly expandable to support other PCI-type interface cards; (4) high-resolution device control (1ms); (5) a built-in real-time cumulative recorder; (6) extensive data analyzing including event recorder, cumulative recorder, block analyzing; the summarized results can be transferred easily to Microsoft Excel spreadsheets through the Clipboard.

Exploring the Planets: A Mathematical Journey

NASA Astrophysics Data System (ADS)

Campbell, M. B.; Johnson, C. L.

2002-12-01

We have developed a series of lessons, designed to teach and reinforce mathematics through lessons about Earth and the bodies that most resemble it in the solar system: Mars, Venus, and the Moon. All lessons are based on California mathematics standards and also cover some Earth science content standards. The overall goal is to achieve cross-curricular learning objectives by showing how math and science work together. While the lessons are designed for a 7th grade math class, they could easily be adapted for a science class, or even modified for different grade levels. The lessons are designed to make recent discoveries in planetary science accessible to students in under-resourced schools. The set of five lessons makes up one unit to be taught consecutively. All the lessons are designed for the alternate day 1 hr and 50 min block scheduling, however the activities could be divided up over two days to accommodate a traditional schedule. There are a total of five lessons, plus a unit test and alternative assessment activities to be given on the sixth day of the unit. In a normal block schedule, the unit should take three weeks. The lessons are available on the web at http://mahi.ucsd.edu/johnson/mathjourney. Each lesson plan comprises the lesson objectives (along with the relevant California 7th grade mathematics standards), a warm-up activity, a vocabulary list (containing words that may be unfamiliar to students, especially those who are learning English), materials required for the class, the lesson structure plus sample dialogue, and in-class and homework activities and worksheets. The in-class activities and worksheets give students the opportunity to master concepts, and can also be useful as a formative assessment tool for the teacher. The mid-unit quiz, final test, and final project can be used as summative assessments. The lessons will be tested this fall by the first author at Davis Middle School, Compton, CA. They will also be disseminated among Teach For America corps members to enable a broader impact in a range of urban and rural under-resourced schools. We have also been using the capabilities of the Scripps Institution of Oceanography Visualization Center to produce fly-throughs of large planetary data sets. These are exported as QuickTime movies, making them available as educational tools.

Is the decline of human anatomy hazardous to medical education/profession?--A review.

PubMed

Singh, Rajani; Shane Tubbs, R; Gupta, Kavita; Singh, Man; Jones, D Gareth; Kumar, Raj

2015-12-01

The continuous decrease in teaching time, the artificially created scarcity of competent anatomical faculties and a reduced allocation of resources have brought about the decline of anatomy in medical education. As a result of this, anatomical knowledge and the standard of medical education have fallen with consequences including safety in clinical practice. The aim of the present study is to analyze this declining phase of anatomy and its impact on medical education and to consider corrective measures. This article expresses comparative viewpoints based on a review of the literature. Anatomy enables doctors to master the language of medical science so they can communicate with patients, the public and fellow doctors and diagnose and treat diseases successfully in all medical fields. No medical specialist or expert can master their field without adequate knowledge of human anatomy. The shrinkage of anatomical schedules, inadequate faculties and declining allocation of resources is therefore unfortunate. These factors produce stress in both student and faculty creating gaps in anatomical knowledge that means insufficient skill is developed to practice medicine safely. This decline is hazardous not only to the medical profession but also to society. Reforms consisting of balanced rescheduling of medical curricula and optimum resource allocation have been proposed to improve the standard of education of doctors.

Determining optimal preventive maintenance interval for component of Well Barrier Element in an Oil & Gas Company

NASA Astrophysics Data System (ADS)

Siswanto, A.; Kurniati, N.

2018-04-01

An oil and gas company has 2,268 oil and gas wells. Well Barrier Element (WBE) is installed in a well to protect human, prevent asset damage and minimize harm to the environment. The primary WBE component is Surface Controlled Subsurface Safety Valve (SCSSV). The secondary WBE component is Christmas Tree Valves that consist of four valves i.e. Lower Master Valve (LMV), Upper Master Valve (UMV), Swab Valve (SV) and Wing Valve (WV). Current practice on WBE Preventive Maintenance (PM) program is conducted by considering the suggested schedule as stated on manual. Corrective Maintenance (CM) program is conducted when the component fails unexpectedly. Both PM and CM need cost and may cause production loss. This paper attempts to analyze the failure data and reliability based on historical data. Optimal PM interval is determined in order to minimize the total cost of maintenance per unit time. The optimal PM interval for SCSSV is 730 days, LMV is 985 days, UMV is 910 days, SV is 900 days and WV is 780 days. In average of all components, the cost reduction by implementing the suggested interval is 52%, while the reliability is improved by 4% and the availability is increased by 5%.

A new Master Events Controller is prepared for installation in STS-99 Endeavour

NASA Technical Reports Server (NTRS)

2000-01-01

Workers in a Quality trailer in the Launch Pad 39B Area unwrap a new Enhanced Main Events Controller (E-MEC) to be installed in Shuttle Endeavour. The original E-MEC in Endeavour became suspect during the Jan. 31 launch countdown and mission STS-99 was delayed when NASA managers decided to replace it. Each Shuttle carries two enhanced master events controllers (E-MECs), which provide relays for onboard flight computers to send signals to arm and fire pyrotechnics that separate the solid rockets and external tank during assent. The E-MECs are located in the orbiter's aft compartment and both are needed for the Shuttle to be cleared for flight. Currently Endeavour and Columbia are the only two orbiters with the E-MECs. Built by Rockwell's Satellite Space Electronics Division, Anaheim, Calif., each unit weighs 65 pounds and is approximately 20 inches long, 13 inches wide and 8 inches tall. Previously, three Shuttle flights have been scrubbed or delayed due to faulty MECs: STS-73, STS-49 and STS-41-D. Before workers can begin E-MEC replacement efforts at the launch pad, cryogenic reactants must be offloaded from the orbiter and Space Shuttle ordnance disconnected. The next scheduled date for launch of STS-99 is Feb. 11 at 12:30 p.m. EST.

A new Master Events Controller is prepared for installation in STS-99 Endeavour

NASA Technical Reports Server (NTRS)

2000-01-01

A new Enhanced Main Events Controller (E-MEC) for Shuttle Endeavour sits on a table in a Quality trailer in the Launch Pad 39B area. The original E-MEC in Endeavour became suspect during the Jan. 31 launch countdown and mission STS-99 was delayed when NASA managers decided to replace it. Each Shuttle carries two enhanced master events controllers (E-MECs), which provide relays for onboard flight computers to send signals to arm and fire pyrotechnics that separate the solid rockets and external tank during assent. The E-MECs are located in the orbiter's aft compartment and both are needed for the Shuttle to be cleared for flight. Currently Endeavour and Columbia are the only two orbiters with the E-MECs. Built by Rockwell's Satellite Space Electronics Division, Anaheim, Calif., each unit weighs 65 pounds and is approximately 20 inches long, 13 inches wide and 8 inches tall. Previously, three Shuttle flights have been scrubbed or delayed due to faulty MECs: STS-73, STS-49 and STS-41-D. Before workers can begin E-MEC replacement efforts at the launch pad, cryogenic reactants must be offloaded from the orbiter and Space Shuttle ordnance disconnected. The next scheduled date for launch of STS-99 is Feb. 11 at 12:30 p.m. EST.

Emotional Self-Efficacy among a Sample of Faculty Members and Its Relation to Gender (Male/Female), Experience, Qualification, and Specialization

ERIC Educational Resources Information Center

Abdel-Hadi, Samer A.

2017-01-01

The present study aimed to identify the level of emotional self-efficacy among a sample of faculty members who speak Arabic at the Abu Dhabi University. The study sample consisted of 99 faculty members Ph.D. and master's holders from scientific, social and education and management and humanities disciplines in University branches: Abu Dhabi and…

Set covering algorithm, a subprogram of the scheduling algorithm for mission planning and logistic evaluation

NASA Technical Reports Server (NTRS)

Chang, H.

1976-01-01

A computer program using Lemke, Salkin and Spielberg's Set Covering Algorithm (SCA) to optimize a traffic model problem in the Scheduling Algorithm for Mission Planning and Logistics Evaluation (SAMPLE) was documented. SCA forms a submodule of SAMPLE and provides for input and output, subroutines, and an interactive feature for performing the optimization and arranging the results in a readily understandable form for output.

Congruent Validity of the Rathus Assertiveness Schedule.

ERIC Educational Resources Information Center

Harris, Thomas L.; Brown, Nina W.

1979-01-01

The validity of the Rathus Assertiveness Schedule (RAS) was investigated by correlating it with the six Class I scales of the California Psychological Inventory on a sample of undergraduate students. Results supported the validity of the RAS. (JKS)

A comparison of modifications of the McMaster method for the enumeration of Ascaris suum eggs in pig faecal samples.

PubMed

Pereckiene, A; Kaziūnaite, V; Vysniauskas, A; Petkevicius, S; Malakauskas, A; Sarkūnas, M; Taylor, M A

2007-10-21

The comparative efficacies of seven published McMaster method modifications for faecal egg counting were evaluated on pig faecal samples containing Ascaris suum eggs. Comparisons were made as to the number of samples found to be positive by each of the methods, the total egg counts per gram (EPG) of faeces, the variations in EPG obtained in the samples examined, and the ease of use of each of the methods. Each method was evaluated after the examination of 30 samples of faeces. The positive samples were identified by counting A. suum eggs in one, two and three sections of newly designed McMaster chamber. In the present study compared methods were reported by: I-Henriksen and Aagaard [Henriksen, S.A., Aagaard, K.A., 1976. A simple flotation and McMaster method. Nord. Vet. Med. 28, 392-397]; II-Kassai [Kassai, T., 1999. Veterinary Helminthology. Butterworth-Heinemann, Oxford, 260 pp.]; III and IV-Urquhart et al. [Urquhart, G.M., Armour, J., Duncan, J.L., Dunn, A.M., Jennings, F.W., 1996. Veterinary Parasitology, 2nd ed. Blackwell Science Ltd., Oxford, UK, 307 pp.] (centrifugation and non-centrifugation methods); V and VI-Grønvold [Grønvold, J., 1991. Laboratory diagnoses of helminths common routine methods used in Denmark. In: Nansen, P., Grønvold, J., Bjørn, H. (Eds.), Seminars on Parasitic Problems in Farm Animals Related to Fodder Production and Management. The Estonian Academy of Sciences, Tartu, Estonia, pp. 47-48] (salt solution, and salt and glucose solution); VII-Thienpont et al. [Thienpont, D., Rochette, F., Vanparijs, O.F.J., 1986. Diagnosing Helminthiasis by Coprological Examination. Coprological Examination, 2nd ed. Janssen Research Foundation, Beerse, Belgium, 205 pp.]. The number of positive samples by examining single section ranged from 98.9% (method I), to 51.1% (method VII). Only with methods I and II, there was a 100% positivity in two out of three of the chambers examined, and FEC obtained using these methods were significantly (p<0.01) higher comparing to remaining methods. Mean FEC varied between 243 EPG (method I) and 82 EPG (method IV). Examination of all three chambers resulted in four methods (I, II, V and VI) having 100% sensitivity, while method VII had the lowest 83.3% sensitivity. Mean FEC in this case varied between 239 EPG (method I) and 81 EPG (method IV). Based on the mean FEC for two chambers, an efficiency coefficient (EF) was calculated and equated to 1 for the highest egg count (method I) and 0.87, 0.57, 0.34, 0.53, 0.49 and 0.50 for remaining methods (II-VII), respectively. Efficiency coefficients make it possible not only to recalculate and unify results of faeces examination obtained by any method but also to interpret coproscopical examinations by other authors. Method VII was the easiest and quickest but least sensitive, and method I the most complex but most sensitive. Examining two or three sections of the McMaster chamber resulted in increased sensitivity for all methods.

Development of a software interface for optical disk archival storage for a new life sciences flight experiments computer

NASA Technical Reports Server (NTRS)

Bartram, Peter N.

1989-01-01

The current Life Sciences Laboratory Equipment (LSLE) microcomputer for life sciences experiment data acquisition is now obsolete. Among the weaknesses of the current microcomputer are small memory size, relatively slow analog data sampling rates, and the lack of a bulk data storage device. While life science investigators normally prefer data to be transmitted to Earth as it is taken, this is not always possible. No down-link exists for experiments performed in the Shuttle middeck region. One important aspect of a replacement microcomputer is provision for in-flight storage of experimental data. The Write Once, Read Many (WORM) optical disk was studied because of its high storage density, data integrity, and the availability of a space-qualified unit. In keeping with the goals for a replacement microcomputer based upon commercially available components and standard interfaces, the system studied includes a Small Computer System Interface (SCSI) for interfacing the WORM drive. The system itself is designed around the STD bus, using readily available boards. Configurations examined were: (1) master processor board and slave processor board with the SCSI interface; (2) master processor with SCSI interface; (3) master processor with SCSI and Direct Memory Access (DMA); (4) master processor controlling a separate STD bus SCSI board; and (5) master processor controlling a separate STD bus SCSI board with DMA.

Survey to Determine Flight Plan Data and Flight Scheduling Accuracy

DOT National Transportation Integrated Search

1972-01-01

This survey determined Operational Flight Plan Data and Flight schduling accuracy vs. published schedules an/or stored flight plan data. This accuracy was determined by sampling tracer flights of varying lengths, selected terminals, and high altitude...

Single transmission line interrogated multiple channel data acquisition system

DOEpatents

Fasching, George E.; Keech, Jr., Thomas W.

1980-01-01

A single transmission line interrogated multiple channel data acquisition system is provided in which a plurality of remote station/sensor circuits each monitors a specific process variable and each transmits measurement values over a single transmission line to a master interrogating station when addressed by said master interrogating station. Typically, as many as 330 remote stations may be parallel connected to the transmission line which may exceed 7,000 feet. The interrogation rate is typically 330 stations/second. The master interrogating station samples each station according to a shared, charging transmit-receive cycle. All remote station address signals, all data signals from the remote stations/sensors and all power for all of the remote station/sensors are transmitted via a single continuous terminated coaxial cable. A means is provided for periodically and remotely calibrating all remote sensors for zero and span. A provision is available to remotely disconnect any selected sensor station from the main transmission line.

Solving the master equation without kinetic Monte Carlo: Tensor train approximations for a CO oxidation model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gelß, Patrick, E-mail: p.gelss@fu-berlin.de; Matera, Sebastian, E-mail: matera@math.fu-berlin.de; Schütte, Christof, E-mail: schuette@mi.fu-berlin.de

2016-06-01

In multiscale modeling of heterogeneous catalytic processes, one crucial point is the solution of a Markovian master equation describing the stochastic reaction kinetics. Usually, this is too high-dimensional to be solved with standard numerical techniques and one has to rely on sampling approaches based on the kinetic Monte Carlo method. In this study we break the curse of dimensionality for the direct solution of the Markovian master equation by exploiting the Tensor Train Format for this purpose. The performance of the approach is demonstrated on a first principles based, reduced model for the CO oxidation on the RuO{sub 2}(110) surface.more » We investigate the complexity for increasing system size and for various reaction conditions. The advantage over the stochastic simulation approach is illustrated by a problem with increased stiffness.« less

Validating YouTube Factors Affecting Learning Performance

NASA Astrophysics Data System (ADS)

Pratama, Yoga; Hartanto, Rudy; Suning Kusumawardani, Sri

2018-03-01

YouTube is often used as a companion medium or a learning supplement. One of the educational places that often uses is Jogja Audio School (JAS) which focuses on music production education. Music production is a difficult material to learn, especially at the audio mastering. With tutorial contents from YouTube, students find it easier to learn and understand audio mastering and improved their learning performance. This study aims to validate the role of YouTube as a medium of learning in improving student’s learning performance by looking at the factors that affect student learning performance. The sample involves 100 respondents from JAS at audio mastering level. The results showed that student learning performance increases seen from factors that have a significant influence of motivation, instructional content, and YouTube usefulness. Overall findings suggest that YouTube has a important role to student learning performance in music production education and as an innovative and efficient learning medium.

The Added Value of the Combined Use of the Autism Diagnostic Interview-Revised and the Autism Diagnostic Observation Schedule: Diagnostic Validity in a Clinical Swedish Sample of Toddlers and Young Preschoolers

ERIC Educational Resources Information Center

Zander, Eric; Sturm, Harald; Bölte, Sven

2015-01-01

The diagnostic validity of the new research algorithms of the Autism Diagnostic Interview-Revised and the revised algorithms of the Autism Diagnostic Observation Schedule was examined in a clinical sample of children aged 18-47 months. Validity was determined for each instrument separately and their combination against a clinical consensus…

The role of abnormal fetal heart rate in scheduling chorionic villus sampling.

PubMed

Yagel, S; Anteby, E; Ron, M; Hochner-Celnikier, D; Achiron, R

1992-09-01

To assess the value of fetal heart rate (FHR) measurements in predicting spontaneous fetal loss in pregnancies scheduled for chorionic villus sampling (CVS). A prospective descriptive study. Two hospital departments of obstetrics and gynaecology in Israel. 114 women between 9 and 11 weeks gestation scheduled for chorionic villus sampling (CVS). Fetal heart rate was measured by transvaginal Doppler ultrasound and compared with a monogram established from 75 fetuses. Whenever a normal FHR was recorded, CVS was performed immediately. 106 women had a normal FHR and underwent CVS; two of these pregnancies ended in miscarriage. In five pregnancies no fetal heart beats could be identified and fetal death was diagnosed. In three pregnancies an abnormal FHR was recorded and CVS was postponed; all three pregnancies ended in miscarriage within 2 weeks. Determination of FHR correlated with crown-rump length could be useful in predicting spontaneous miscarriage before performing any invasive procedure late in the first trimester.

Development of a large color range for a paint company

NASA Astrophysics Data System (ADS)

McGinley, Peter

2002-06-01

Experience with the Master Palette system of 6000 colors lead to a specification for a new color range where the primary design feature is the control of the paint tint formula. This design approach met a market-derived requirement for sample pots and fractional-strength colors. The layout process employed was able to display the color capability of the paint system and generate an array of colors with controlled spacing similar to Master Palette. Updated pigment selections and the introduction of additional colored bases completed the system specification of improved opacity and every color being exterior durable.

Cenozoic to Cretaceous paleomagnetic dataset from Egypt: New data, review and global analysis

NASA Astrophysics Data System (ADS)

Perrin, Mireille; Saleh, Ahmed

2018-04-01

Different phases of igneous activity took place in Egypt during the Mesozoic and the Cenozoic and oriented samples were collected from three Cenozoic localities (Baharya oasis in the Western Desert, Abu Had in the Eastern Desert and Quseir along the Red Sea coast), and four Cretaceous localities (Toshki & Abu Simbel south of Aswan, and Shalaten & Abu Shihat along the Red Sea coast). Rock magnetic properties of the samples indicate magnetite and titanomagnetite as the main carrier of the remanent magnetization. Following stepwise demagnetization, characteristic remanent directions were identified only for 62% of the samples, a fairly low rate for that type of samples, and 8 new paleomagnetic poles were calculated. All our Cenozoic poles fall clearly off Master Polar Wander Paths proposed for South Africa. Therefore, all paleomagnetic results, previously published for Egypt, were compiled from Cretaceous to Quaternary. The published poles largely overlap, blurring the Egyptian Apparent Polar Wander Path. A new analysis at the site level was then carried out. Only poles having a kappa larger than 50 were selected, and new pole positions were calculated by area and by epoch, when at least 3 sites were available. Even though the selection drastically reduced the number of considered poles, it allows definition of a reliable Cenozoic apparent polar wander trend for Egypt that differs from the South African Master Polar Wander Path by about 10-15 °. If the Cretaceous igneous poles are in good agreement with the rest of the African data, the sedimentary poles plot close to the Cenozoic portion of the South African Master Polar Wander Path, a discrepancy that could be related either to inclination flattening and/or error on age and/or remagnetization in the Cenozoic.

Assessment of Emotional Intelligence in a Sample of Prospective Secondary Education Teachers

ERIC Educational Resources Information Center

Gutiérrez-Moret, Margarita; Ibáñez-Martinez, Raquel; Aguilar-Moya, Remedios; Vidal-Infer, Antonio

2016-01-01

In the past few years, skills related to emotional intelligence (EI) have acquired special relevance in the educational domain. This study assesses EI in a sample of 155 students of 5 different specialities of a Master's degree in Teacher Training for Secondary Education. Data collection was conducted through the administration of the Trait Meta…

The New Rules: How To Succeed in Today's Post-Corporate World.

ERIC Educational Resources Information Center

Kotter, John P.

The new realities of today's postcorporate world and the new rules for achieving success were examined through a study of the career progress of a sample of 115 individuals who graduated from Harvard in 1974 with a Master's of Business Administration. The members of the study sample completed yearly questionnaires between January 1975 and 1992.…

Gender, Gender Roles Affecting Mate Preferences in Turkish College Students

ERIC Educational Resources Information Center

Gazioglu, A. Esra Ismen

2008-01-01

The subject of this study is gender and gender roles affecting mate preferences. The sample of the study consists of 300 undergraduates and master students. To identify students' gender roles the Sex Role Evaluation Inventory (Bem, 1974) is used. The Question List (Bacanli 2001; Buss et. al., 1990) is applied to the sample group to determine the…

Problems of Female School Teachers in District Kulgam (J&K)

ERIC Educational Resources Information Center

Rashid, Ruhee; Maharashi, Santosh Kumar

2015-01-01

The purpose of this study is to find the problems of employed female school teachers in district Kulgam. Sample of 100 employed women are selected from different education institutions as 20 Rehaber e Taleem (ReT) female teachers, 40 female teachers, 20 female masters and 20 female lecturers using stratified random sampling. In this study we use…

Computer program documentation user information for the RSO-tape print program (RSOPRNT)

NASA Technical Reports Server (NTRS)

Gibbs, P. M. (Principal Investigator)

1980-01-01

A user's guide for the RSOPRNT, a TRASYS Master Restart Output Tape (RSO) reader is presented. Background information and sample runstreams, as well as, references, input requirements and options, are included.

Linear and nonlinear spectroscopy from quantum master equations.

PubMed

Fetherolf, Jonathan H; Berkelbach, Timothy C

2017-12-28

We investigate the accuracy of the second-order time-convolutionless (TCL2) quantum master equation for the calculation of linear and nonlinear spectroscopies of multichromophore systems. We show that even for systems with non-adiabatic coupling, the TCL2 master equation predicts linear absorption spectra that are accurate over an extremely broad range of parameters and well beyond what would be expected based on the perturbative nature of the approach; non-equilibrium population dynamics calculated with TCL2 for identical parameters are significantly less accurate. For third-order (two-dimensional) spectroscopy, the importance of population dynamics and the violation of the so-called quantum regression theorem degrade the accuracy of TCL2 dynamics. To correct these failures, we combine the TCL2 approach with a classical ensemble sampling of slow microscopic bath degrees of freedom, leading to an efficient hybrid quantum-classical scheme that displays excellent accuracy over a wide range of parameters. In the spectroscopic setting, the success of such a hybrid scheme can be understood through its separate treatment of homogeneous and inhomogeneous broadening. Importantly, the presented approach has the computational scaling of TCL2, with the modest addition of an embarrassingly parallel prefactor associated with ensemble sampling. The presented approach can be understood as a generalized inhomogeneous cumulant expansion technique, capable of treating multilevel systems with non-adiabatic dynamics.

Linear and nonlinear spectroscopy from quantum master equations

NASA Astrophysics Data System (ADS)

Fetherolf, Jonathan H.; Berkelbach, Timothy C.

2017-12-01

We investigate the accuracy of the second-order time-convolutionless (TCL2) quantum master equation for the calculation of linear and nonlinear spectroscopies of multichromophore systems. We show that even for systems with non-adiabatic coupling, the TCL2 master equation predicts linear absorption spectra that are accurate over an extremely broad range of parameters and well beyond what would be expected based on the perturbative nature of the approach; non-equilibrium population dynamics calculated with TCL2 for identical parameters are significantly less accurate. For third-order (two-dimensional) spectroscopy, the importance of population dynamics and the violation of the so-called quantum regression theorem degrade the accuracy of TCL2 dynamics. To correct these failures, we combine the TCL2 approach with a classical ensemble sampling of slow microscopic bath degrees of freedom, leading to an efficient hybrid quantum-classical scheme that displays excellent accuracy over a wide range of parameters. In the spectroscopic setting, the success of such a hybrid scheme can be understood through its separate treatment of homogeneous and inhomogeneous broadening. Importantly, the presented approach has the computational scaling of TCL2, with the modest addition of an embarrassingly parallel prefactor associated with ensemble sampling. The presented approach can be understood as a generalized inhomogeneous cumulant expansion technique, capable of treating multilevel systems with non-adiabatic dynamics.

High Penetration of Electrical Vehicles in Microgrids: Threats and Opportunities

NASA Astrophysics Data System (ADS)

Khederzadeh, Mojtaba; Khalili, Mohammad

2014-10-01

Given that the microgrid concept is the building block of future electric distribution systems and electrical vehicles (EVs) are the future of transportation market, in this paper, the impact of EVs on the performance of microgrids is investigated. Demand-side participation is used to cope with increasing demand for EV charging. The problem of coordination of EV charging and discharging (with vehicle-to-grid (V2G) functionality) and demand response is formulated as a market-clearing mechanism that accepts bids from the demand and supply sides and takes into account the constraints put forward by different parts. Therefore, a day-ahead market with detailed bids and offers within the microgrid is designed whose objective is to maximize the social welfare which is the difference between the value that consumers attach to the electrical energy they buy plus the benefit of the EV owners participating in the V2G functionality and the cost of producing/purchasing this energy. As the optimization problem is a mixed integer nonlinear programming one, it is decomposed into one master problem for energy scheduling and one subproblem for power flow computation. The two problems are solved iteratively by interfacing MATLAB with GAMS. Simulation results on a sample microgrid with different residential, commercial and industrial consumers with associated demand-side biddings and different penetration level of EVs support the proposed formulation of the problem and the applied methods.

Earth Observing System (EOS)/Advanced Microwave Sounding Unit-A (AMSU-A)

NASA Technical Reports Server (NTRS)

Mullooly, William

1995-01-01

This is the thirty-first monthly report for the Earth Observing System (EOS)/Advanced Microwave Sounding Unit- A (AMSU-A), Contract NAS5-32314, and covers the period from 1 July 1995 through 31 July 1995. This period is the nineteenth month of the Implementation Phase which provides for the design, fabrication, assembly, and test of the first EOS/AMSU-A, the Protoflight Model. Included in this report is the Master Program Schedule (Section 2), a report from the Product Team Leaders on the status of all major program elements (Section 3), Drawing status (Section 4), Weight and Power Budgets (CDRL) 503 (Section 5), Performance Assurance (CDRL 204) (Section 6), Configuration Management Status Report (CDRL 203) (Section 7), Documentation/Data Management Status Report (Section 8), and Contract Status (Section 9).

Lead and Copper Rule Tier Schedule

EPA Pesticide Factsheets

The Lead and Copper Rule Tier Schedule may be used by public water systems in Wyoming and on EPA R8 Tribal Lands as a guide to properly identify their lead and copper tap sample sites to comply with the Lead and Copper Rule.

Analysis of sequencing and scheduling methods for arrival traffic

NASA Technical Reports Server (NTRS)

Neuman, Frank; Erzberger, Heinz

1990-01-01

The air traffic control subsystem that performs scheduling is discussed. The function of the scheduling algorithms is to plan automatically the most efficient landing order and to assign optimally spaced landing times to all arrivals. Several important scheduling algorithms are described and the statistical performance of the scheduling algorithms is examined. Scheduling brings order to an arrival sequence for aircraft. First-come-first-served scheduling (FCFS) establishes a fair order, based on estimated times of arrival, and determines proper separations. Because of the randomness of the traffic, gaps will remain in the scheduled sequence of aircraft. These gaps are filled, or partially filled, by time-advancing the leading aircraft after a gap while still preserving the FCFS order. Tightly scheduled groups of aircraft remain with a mix of heavy and large aircraft. Separation requirements differ for different types of aircraft trailing each other. Advantage is taken of this fact through mild reordering of the traffic, thus shortening the groups and reducing average delays. Actual delays for different samples with the same statistical parameters vary widely, especially for heavy traffic.

Pavor nocturnus: a complication of single daily tricyclic or neuroleptic dosage.

PubMed

Flemenbaum, A

1976-05-01

The author tested the hypothesis that a single bedtime dosage schedule of tricyclic or neuroleptic medication produces increased frequency of night terrors by administering a questionnaire to 30 medical patients who were not receiving such medications and 100 psychiatric patients on either multiple- or single-dosage schedules. Psychiatric patients on multiple-dosage schedules reported no more frightening dreams than the medical patients, whereas almost three-fourths of those receiving single bedtime doses had frightening dreams, a significant difference from the medical sample. This preliminary report is presented to call attention to the possible undesirable effects of a single dose schedule.

Real-Time Tomography Mooring

DTIC Science & Technology

1992-06-01

Vi th this sampling schedule the data logger has enough (data. storage capacity for, a five yea r deploymeneit-. SYsteim specifica tionis are shown...sit [I t ille check is pwrformed as a virttial device. called -Ilinei check". which is scheduled in the task tabhe aid(] executed by the systsenm cot...PCI as FSK carrier detect input- add function (5) to do timer/counter control - stop counter when defaults set I 6. Instrument scheduler software

Linear model correction: A method for transferring a near-infrared multivariate calibration model without standard samples.

PubMed

Liu, Yan; Cai, Wensheng; Shao, Xueguang

2016-12-05

Calibration transfer is essential for practical applications of near infrared (NIR) spectroscopy because the measurements of the spectra may be performed on different instruments and the difference between the instruments must be corrected. For most of calibration transfer methods, standard samples are necessary to construct the transfer model using the spectra of the samples measured on two instruments, named as master and slave instrument, respectively. In this work, a method named as linear model correction (LMC) is proposed for calibration transfer without standard samples. The method is based on the fact that, for the samples with similar physical and chemical properties, the spectra measured on different instruments are linearly correlated. The fact makes the coefficients of the linear models constructed by the spectra measured on different instruments are similar in profile. Therefore, by using the constrained optimization method, the coefficients of the master model can be transferred into that of the slave model with a few spectra measured on slave instrument. Two NIR datasets of corn and plant leaf samples measured with different instruments are used to test the performance of the method. The results show that, for both the datasets, the spectra can be correctly predicted using the transferred partial least squares (PLS) models. Because standard samples are not necessary in the method, it may be more useful in practical uses. Copyright © 2016 Elsevier B.V. All rights reserved.

Creation of the selection list for the Experiment Scheduling Program (ESP)

NASA Technical Reports Server (NTRS)

Deuermeyer, B. L.; Shannon, R. E.; Underbrink, A. J., Jr.

1986-01-01

The efforts to develop a procedure to construct selection groups to augment the Experiment Scheduling Program (ESP) are summarized. Included is a User's Guide and a sample scenario to guide in the use of the software system that implements the developed procedures.

Lunar Sample Quarantine & Sample Curation

NASA Technical Reports Server (NTRS)

Allton, Judith H.

2000-01-01

The main goal of this presentation is to discuss some of the responsibility of the lunar sample quarantine project. The responsibilities are: flying the mission safely, and on schedule, protect the Earth from biohazard, and preserve scientific integrity of samples.

Performance of the Extravehicular Mobility Unit (EMU): Airlock Coolant Loop Recovery (A/L CLR) Hardware - Phase II

NASA Technical Reports Server (NTRS)

Steele, John; Rector, tony; Gazda, Daniel; Lewis, John

2009-01-01

An EMU water processing kit (Airlock Coolant Loop Recovery A/L CLR) was developed as a corrective action to Extravehicular Mobility Unit (EMU) coolant flow disruptions experienced on the International Space Station (ISS) in May of 2004 and thereafter. Conservative schedules for A/L CLR use and component life were initially developed and implemented based on prior analysis results and analytical modeling. The examination of postflight samples and EMU hardware in November of 2006 indicated that the A/L CLR kits were functioning well and had excess capacity that would allow a relaxation of the initially conservative schedules of use and component life. A relaxed use schedule and list of component lives was implemented thereafter. Since the adoption of the relaxed A/L CLR schedules of use and component lives, several A/L CLR kit components, transport loop water samples and sensitive EMU transport loop components have been examined to gage the impact of the relaxed requirements. The intent of this paper is to summarize the findings of that evaluation, and to outline updated schedules for A/L CLR use and component life.

Optimizing integrated airport surface and terminal airspace operations under uncertainty

NASA Astrophysics Data System (ADS)

Bosson, Christabelle S.

In airports and surrounding terminal airspaces, the integration of surface, arrival and departure scheduling and routing have the potential to improve the operations efficiency. Moreover, because both the airport surface and the terminal airspace are often altered by random perturbations, the consideration of uncertainty in flight schedules is crucial to improve the design of robust flight schedules. Previous research mainly focused on independently solving arrival scheduling problems, departure scheduling problems and surface management scheduling problems and most of the developed models are deterministic. This dissertation presents an alternate method to model the integrated operations by using a machine job-shop scheduling formulation. A multistage stochastic programming approach is chosen to formulate the problem in the presence of uncertainty and candidate solutions are obtained by solving sample average approximation problems with finite sample size. The developed mixed-integer-linear-programming algorithm-based scheduler is capable of computing optimal aircraft schedules and routings that reflect the integration of air and ground operations. The assembled methodology is applied to a Los Angeles case study. To show the benefits of integrated operations over First-Come-First-Served, a preliminary proof-of-concept is conducted for a set of fourteen aircraft evolving under deterministic conditions in a model of the Los Angeles International Airport surface and surrounding terminal areas. Using historical data, a representative 30-minute traffic schedule and aircraft mix scenario is constructed. The results of the Los Angeles application show that the integration of air and ground operations and the use of a time-based separation strategy enable both significant surface and air time savings. The solution computed by the optimization provides a more efficient routing and scheduling than the First-Come-First-Served solution. Additionally, a data driven analysis is performed for the Los Angeles environment and probabilistic distributions of pertinent uncertainty sources are obtained. A sensitivity analysis is then carried out to assess the methodology performance and find optimal sampling parameters. Finally, simulations of increasing traffic density in the presence of uncertainty are conducted first for integrated arrivals and departures, then for integrated surface and air operations. To compare the optimization results and show the benefits of integrated operations, two aircraft separation methods are implemented that offer different routing options. The simulations of integrated air operations and the simulations of integrated air and surface operations demonstrate that significant traveling time savings, both total and individual surface and air times, can be obtained when more direct routes are allowed to be traveled even in the presence of uncertainty. The resulting routings induce however extra take off delay for departing flights. As a consequence, some flights cannot meet their initial assigned runway slot which engenders runway position shifting when comparing resulting runway sequences computed under both deterministic and stochastic conditions. The optimization is able to compute an optimal runway schedule that represents an optimal balance between total schedule delays and total travel times.

A Data Scheduling and Management Infrastructure for the TEAM Network

NASA Astrophysics Data System (ADS)

Andelman, S.; Baru, C.; Chandra, S.; Fegraus, E.; Lin, K.; Unwin, R.

2009-04-01

The objective of the Tropical Ecology Assessment and Monitoring Network (www.teamnetwork.org) is "To generate real time data for monitoring long-term trends in tropical biodiversity through a global network of TEAM sites (i.e. field stations in tropical forests), providing an early warning system on the status of biodiversity to effectively guide conservation action". To achieve this, the TEAM Network operates by collecting data via standardized protocols at TEAM Sites. The standardized TEAM protocols include the Climate, Vegetation and Terrestrial Vertebrate Protocols. Some sites also implement additional protocols. There are currently 7 TEAM Sites with plans to grow the network to 15 by June 30, 2009 and 50 TEAM Sites by the end of 2010. Climate Protocol The Climate Protocol entails the collection of climate data via meteorological stations located at the TEAM Sites. This includes information such as precipitation, temperature, wind direction and strength and various solar radiation measurements. Vegetation Protocol The Vegetation Protocol collects standardized information on tropical forest trees and lianas. A TEAM Site will have between 6-9 1ha plots where trees and lianas larger than a pre-specified size are mapped, identified and measured. This results in each TEAM Site repeatedly measuring between 3000-5000 trees annually. Terrestrial Vertebrate Protocol The Terrestrial Vertebrate Protocol collects standardized information on mid-sized tropical forest fauna (i.e. birds and mammals). This information is collected via camera traps (i.e. digital cameras with motion sensors housed in weather proof casings). The images taken by the camera trap are reviewed to identify what species are captured in the image by the camera trap. The image and the interpretation of what is in the image are the data for the Terrestrial Vertebrate Protocol. The amount of data collected through the TEAM protocols provides a significant yet exciting IT challenge. The TEAM Network is currently partnering with the San Diego Super Computer Center to build the data management infrastructure. Data collected from the three core protocols as well as others are currently made available through the TEAM Network portal, which provides the content management framework, the data scheduling and management framework, an administrative framework to implement and manage TEAM sites, collaborative tools and a number of tools and applications utilizing Google Map and Google Earth products. A critical element of the TEAM Network data management infrastructure is to make the data publicly available in as close to real-time as possible (the TEAM Network Data Use Policy: http://www.teamnetwork.org/en/data/policy). This requires two essential tasks to be accomplished, 1) A data collection schedule has to be planned, proposed and approved for a given TEAM site. This is a challenging process since TEAM sites are geographically distributed across the tropics and hence have different seasons where they schedule field sampling for the different TEAM protocols. Capturing this information and ensuring that TEAM sites follow the outlined legal contract is key to the data collection process and 2) A stream-lined and efficient information management system to ensure data collected from the field meet the minimum data standards (i.e. are of the highest scientific quality) and are securely transferred, archived, processed and be rapidly made publicaly available, as a finished consumable product via the TEAM Network portal. The TEAM Network is achieving these goals by implementing an end-to-end framework consisting of the Sampling Scheduler application and the Data Management Framework. Sampling Scheduler The Sampling Scheduler is a project management, calendar based portal application that will allow scientists at a TEAM site to schedule field sampling for each of the TEAM protocols implemented at that site. The sampling scheduler addresses the specific requirements established in the TEAM protocols with the logistical scheduling needs of each TEAM Site. For example, each TEAM protocol defines when data must be collected (e.g. time of day, number of times per year, during which seasons, etc) as well as where data must be collected (from which sampling units, which trees, etc). Each TEAM Site has a limited number of resources and must create plans that will both satisfy the requirements of the protocols as well as be logistically feasible for their TEAM Site. With 15 TEAM Sites (and many more coming soon) the schedules of each TEAM Site must be communicated to the Network Office to ensure data are being collected as scheduled and to address the many problems when working in difficult environments like Tropical Forests. The Sampling Schedule provides built-in proposal and approval functionality to ensure that the TEAM Sites are and the Network office are in sync as well as provides the capability to modify schedules when needed. The Data Management Framework The Data Management framework is a three-tier data ingestion, edit and review application for protocols defined in the TEAM network. The data ingestion framework provides online web forms for field personnel to submit and edit data collected at TEAM Sites. These web forms will be accessible from the TEAM content management site. Once the data is securely uploaded, cured, processed and approved, it will be made publicly available for consumption by the scientific community. The Data Management framework, when combined with the Sampling Scheduler provides a closed loop Data Scheduling and Management infrastructure. All information starting from data collection plan, tools to input, modify and curate data, review and run QA/QC tests, as well as verify data are collected as planed are included. Finally, TEAM Network data are available for download via the Data Query and Download Application. This application utilizes a Google Maps custom interface to search, visualize, and download TEAM Network data. References • TEAM Network, http://www.teamnetwork.org • Center for Applied Biodiversity Science, Conservation International. http://science.conservation.org/portal/server.pt • TEAM Data Query and Download Application, http://www.teamnetwork.org/en/data/query

Implementing Earned Value Management in the CxP EVA Systems Project Office

NASA Technical Reports Server (NTRS)

Sorge, Les L.

2009-01-01

Earned Value Management (EVM), like project management, is as much art as it is science to develop an implementation plan for a project. This presentation will cover issues that were overcome and the implementation strategy to deploy Earned Value Management (EVM) within the Constellation Program (CxP), EVA Systems Project Office (ESPO), as well as discuss additional hurdles that currently prevent the organization from optimizing EVM. Each organization and each project within an organization needs to mold an EVM implementation plan around existing processes and tools, while at the same time revising those existing processes and tools as necessary to make them compatible with EVM. The ESPO EVM implementation covers work breakdown structure, organizational breakdown structure, control account, work/planning package development; integrated master schedule development using an integrated master plan; incorporating reporting requirements for existing funding process such as Planning, Programming, Budgeting, and Execution (PPBE) and JSC Internal Task Agreements (ITA); and interfacing with other software tools such as the Systems Applications and Products (SAP) accounting system and the CxP wInsight EVM analysis tool. However, there are always areas for improvement and EVM is no exception. As EVM continues to mature within the NASA CxP, these areas will continue to be worked to resolution to provide the Program Managers, Project Managers, and Control Account Managers the best EVM data possible to make informed decisions.

The IPHI Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ferdinand, Robin; Beauvais, Pierre-Yves

High Power Proton Accelerators (HPPAs) are studied for several projects based on high-flux neutron sources driven by proton or deuteron beams. Since the front end is considered as the most critical part of such accelerators, the two French national research agencies CEA and CNRS decided to collaborate in 1997 to study and build a High-Intensity Proton Injector (IPHI). The main objective of this project is to master the complex technologies used and the concepts of manufacturing and controlling the HPPAs. Recently, a collaboration agreement was signed with CERN and led to some evolutions in the design and in the schedule.more » The IPHI design current was maintained at 100 mA in Continuous Wave mode. This choice should allow to produce a high reliability beam at reduced intensity (typically 30 mA) tending to fulfill the Accelerator Driven System requirements. The output energy of the Radio Frequency Quadrupole (RFQ), was reduced from 5 to 3 MeV, allowing then the adjunction and the test, in pulsed operation of a chopper line developed by CERN for the Superconducting Proton Linac (SPL). In a final step, the IPHI RFQ and the chopper line should become parts of the SPL injector. In this paper, the IPHI project and the recent evolutions are reported together with the construction and operation schedule.« less

Regulation of Mammalian Physiology by Interconnected Circadian and Feeding Rhythms

PubMed Central

Atger, Florian; Mauvoisin, Daniel; Weger, Benjamin; Gobet, Cédric; Gachon, Frédéric

2017-01-01

Circadian clocks are endogenous timekeeping systems that adapt in an anticipatory fashion the physiology and behavior of most living organisms. In mammals, the master pacemaker resides in the suprachiasmatic nucleus and entrains peripheral clocks using a wide range of signals that differentially schedule physiology and gene expression in a tissue-specific manner. The peripheral clocks, such as those found in the liver, are particularly sensitive to rhythmic external cues like feeding behavior, which modulate the phase and amplitude of rhythmic gene expression. Consequently, the liver clock temporally tunes the expression of many genes involved in metabolism and physiology. However, the circadian modulation of cellular functions also relies on multiple layers of posttranscriptional and posttranslational regulation. Strikingly, these additional regulatory events may happen independently of any transcriptional oscillations, showing that complex regulatory networks ultimately drive circadian output functions. These rhythmic events also integrate feeding-related cues and adapt various metabolic processes to food availability schedules. The importance of such temporal regulation of metabolism is illustrated by metabolic dysfunctions and diseases resulting from circadian clock disruption or inappropriate feeding patterns. Therefore, the study of circadian clocks and rhythmic feeding behavior should be of interest to further advance our understanding of the prevention and therapy of metabolic diseases. PMID:28337174

Towards a Decision Support System for Space Flight Operations

NASA Technical Reports Server (NTRS)

Meshkat, Leila; Hogle, Charles; Ruszkowski, James

2013-01-01

The Mission Operations Directorate (MOD) at the Johnson Space Center (JSC) has put in place a Model Based Systems Engineering (MBSE) technological framework for the development and execution of the Flight Production Process (FPP). This framework has provided much added value and return on investment to date. This paper describes a vision for a model based Decision Support System (DSS) for the development and execution of the FPP and its design and development process. The envisioned system extends the existing MBSE methodology and technological framework which is currently in use. The MBSE technological framework currently in place enables the systematic collection and integration of data required for building an FPP model for a diverse set of missions. This framework includes the technology, people and processes required for rapid development of architectural artifacts. It is used to build a feasible FPP model for the first flight of spacecraft and for recurrent flights throughout the life of the program. This model greatly enhances our ability to effectively engage with a new customer. It provides a preliminary work breakdown structure, data flow information and a master schedule based on its existing knowledge base. These artifacts are then refined and iterated upon with the customer for the development of a robust end-to-end, high-level integrated master schedule and its associated dependencies. The vision is to enhance this framework to enable its application for uncertainty management, decision support and optimization of the design and execution of the FPP by the program. Furthermore, this enhanced framework will enable the agile response and redesign of the FPP based on observed system behavior. The discrepancy of the anticipated system behavior and the observed behavior may be due to the processing of tasks internally, or due to external factors such as changes in program requirements or conditions associated with other organizations that are outside of MOD. The paper provides a roadmap for the three increments of this vision. These increments include (1) hardware and software system components and interfaces with the NASA ground system, (2) uncertainty management and (3) re-planning and automated execution. Each of these increments provide value independently; but some may also enable building of a subsequent increment.

Development of Improved Graphical Displays for an Advanced Outage Control Center, Employing Human Factors Principles for Outage Schedule Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

St Germain, Shawn Walter; Farris, Ronald Keith; Thomas, Kenneth David

The long-term viability of existing nuclear power plants in the United States (U.S.) is dependent upon a number of factors, including maintaining high capacity factors, maintaining nuclear safety, and reducing operating costs, particularly those associated with refueling outages. Refueling outages typically take 20-30 days, and for existing light water NPPs in the U.S., the reactor cannot be in operation during the outage. Furthermore, given that many NPPs generate between $1-1.5 million/day in revenue when in operation, there is considerable interest in shortening the length of refueling outages. Yet refueling outages are highly complex operations, involving multiple concurrent and dependent activitiesmore » that are somewhat challenging to coordinate; therefore, finding ways to improve refueling outage performance, while maintaining nuclear safety has proven to be difficult. The Advanced Outage Control Center (AOCC) project is a research and development (R&D) demonstration activity under the LWRS Program. LWRS is an R&D program that works closely with industry R&D programs to establish technical foundations for the licensing and managing of long-term, safe, and economical operation of current fleet of NPPs. As such, the LWRS Advanced Outage Control Center project has the goal of improving the management of commercial NPP refueling outages. To accomplish this goal, INL is developing an advanced outage control center (OCC) that is specifically designed to maximize the usefulness of communication and collaboration technologies for outage coordination and problem resolution activities. The overall focus is on developing an AOCC with the following capabilities that enables plant and OCC staff to; Collaborate in real-time to address emergent issues; Effectively communicate outage status to all workers involved in the outage; Effectively communicate discovered conditions in the field to the OCC; Provide real-time work status; Provide automatic pending support notifications; Provide real-time requirements monitoring; Maximize their collective situational awareness to improve decision-making; and Leverage macro data to better support resource allocation. INL has partnered with several commercial NPP utilities to develop a number of advanced outage management technologies. These outage management technologies have focused on both collaborative technologies for control centers and developing mobile technologies for NPP field workers. This report describes recent efforts made in developing a suite of outage technologies to support more effective schedule management. Currently, a master outage schedule is created months in advance using the plant’s existing scheduling software (e.g., Primavera P6). Typically, during the outage, the latest version of the schedule is printed at the beginning of each shift. INL and its partners are developing technologies that will have capabilities such as Automatic Schedule Updating, Automatic Pending Support Notifications, and the ability to allocate and schedule outage support task resources on a sub-hour basis (e.g., outage Micro-Scheduling). The remaining sections of this report describe in more detail the scheduling challenges that occur during outages, how the outage scheduling technologies INL is developing helps address those challenges, and the latest developments on this task (e.g., work accomplished to date and the path forward)« less

[The effect of aluminum adjuvant and immunization schedule on immunogenicity of Sabin inactivated poliovirus vaccine].

PubMed

Wang, Fang; Zhang, Ming; Xie, Bing-Feng; Cao, Han; Tong, Shao-Yong; Wang, Jun-Rong; Yu, Xiao-Ping; Tang, Yang; Yang, Jing-Ran; Sun, Ming-Bo

2013-04-01

To study the effect of aluminume adjuvant and immunization schedule on immunogenicity of Sabin inactivated poliovirus vaccine. Four batches of Sabin IPV were produced by different concentrations of type 1, 2, and 3 poliovirus and administrated on three-dose schedule at 0, 1, 2 months and 0, 2, 4 months on rats. Serum samples were collected one month after each dose and neutralizing antibody titers against three types poliovirus were determined by micro-neutralization assay. The GMTs of neutralizing antibodies against three types poliovirus increased significantly and the seropositivity rates were 100% in all groups after 3 doses. There was no significant difference between two immunization schedules, and the 0, 2, 4 month schedule could induce higher level neutralizing antibody compared to the 0, 1, 2 month schedule. The groups with aluminum adjuvant could induce higher level neutralizing antibody compared to the groups without adjuvant. Aluminum djuvant and immunization schedule could improve the immunogenicity of Sabin IPV.

A Comparison of Techniques for Scheduling Fleets of Earth-Observing Satellites

NASA Technical Reports Server (NTRS)

Globus, Al; Crawford, James; Lohn, Jason; Pryor, Anna

2003-01-01

Earth observing satellite (EOS) scheduling is a complex real-world domain representative of a broad class of over-subscription scheduling problems. Over-subscription problems are those where requests for a facility exceed its capacity. These problems arise in a wide variety of NASA and terrestrial domains and are .XI important class of scheduling problems because such facilities often represent large capital investments. We have run experiments comparing multiple variants of the genetic algorithm, hill climbing, simulated annealing, squeaky wheel optimization and iterated sampling on two variants of a realistically-sized model of the EOS scheduling problem. These are implemented as permutation-based methods; methods that search in the space of priority orderings of observation requests and evaluate each permutation by using it to drive a greedy scheduler. Simulated annealing performs best and random mutation operators outperform our squeaky (more intelligent) operator. Furthermore, taking smaller steps towards the end of the search improves performance.

Choice with frequently changing food rates and food ratios.

PubMed

Baum, William M; Davison, Michael

2014-03-01

In studies of operant choice, when one schedule of a concurrent pair is varied while the other is held constant, the constancy of the constant schedule may exert discriminative control over performance. In our earlier experiments, schedules varied reciprocally across components within sessions, so that while food ratio varied food rate remained constant. In the present experiment, we held one variable-interval (VI) schedule constant while varying the concurrent VI schedule within sessions. We studied five conditions, each with a different constant left VI schedule. On the right key, seven different VI schedules were presented in seven different unsignaled components. We analyzed performances at several different time scales. At the longest time scale, across conditions, behavior ratios varied with food ratios as would be expected from the generalized matching law. At shorter time scales, effects due to holding the left VI constant became more and more apparent, the shorter the time scale. In choice relations across components, preference for the left key leveled off as the right key became leaner. Interfood choice approximated strict matching for the varied right key, whereas interfood choice hardly varied at all for the constant left key. At the shortest time scale, visit patterns differed for the left and right keys. Much evidence indicated the development of a fix-and-sample pattern. In sum, the procedural difference made a large difference to performance, except for choice at the longest time scale and the fix-and-sample pattern at the shortest time scale. © Society for the Experimental Analysis of Behavior.

Potato Operation: automatic detection of potato diseases

NASA Astrophysics Data System (ADS)

Lefebvre, Marc; Zimmerman, Thierry; Baur, Charles; Guegerli, Paul; Pun, Thierry

1995-01-01

The Potato Operation is a collaborative, multidisciplinary project in the domain of destructive testing of agricultural products. It aims at automatizing pulp sampling of potatoes in order to detect possible viral diseases. Such viruses can decrease fields productivity by a factor of up to ten. A machine, composed of three conveyor belts, a vision system, a robotic arm and controlled by a PC has been built. Potatoes are brought one by one from a bulk to the vision system, where they are seized by a rotating holding device. The sprouts, where the viral activity is maximum, are then detected by an active vision process operating on multiple views. The 3D coordinates of the sampling point are communicated to the robot arm holding a drill. Some flesh is then sampled by the drill, then deposited into an Elisa plate. After sampling, the robot arm washes the drill in order to prevent any contamination. The PC computer simultaneously controls these processes, the conveying of the potatoes, the vision algorithms and the sampling procedure. The master process, that is the vision procedure, makes use of three methods to achieve the sprouts detection. A profile analysis first locates the sprouts as protuberances. Two frontal analyses, respectively based on fluorescence and local variance, confirm the previous detection and provide the 3D coordinate of the sampling zone. The other two processes work by interruption of the master process.

A new variable interval schedule with constant hazard rate and finite time range.

PubMed

Bugallo, Mehdi; Machado, Armando; Vasconcelos, Marco

2018-05-27

We propose a new variable interval (VI) schedule that achieves constant probability of reinforcement in time while using a bounded range of intervals. By sampling each trial duration from a uniform distribution ranging from 0 to 2 T seconds, and then applying a reinforcement rule that depends linearly on trial duration, the schedule alternates reinforced and unreinforced trials, each less than 2 T seconds, while preserving a constant hazard function. © 2018 Society for the Experimental Analysis of Behavior.

A Novel Wide-Area Backup Protection Based on Fault Component Current Distribution and Improved Evidence Theory

PubMed Central

Zhang, Zhe; Kong, Xiangping; Yin, Xianggen; Yang, Zengli; Wang, Lijun

2014-01-01

In order to solve the problems of the existing wide-area backup protection (WABP) algorithms, the paper proposes a novel WABP algorithm based on the distribution characteristics of fault component current and improved Dempster/Shafer (D-S) evidence theory. When a fault occurs, slave substations transmit to master station the amplitudes of fault component currents of transmission lines which are the closest to fault element. Then master substation identifies suspicious faulty lines according to the distribution characteristics of fault component current. After that, the master substation will identify the actual faulty line with improved D-S evidence theory based on the action states of traditional protections and direction components of these suspicious faulty lines. The simulation examples based on IEEE 10-generator-39-bus system show that the proposed WABP algorithm has an excellent performance. The algorithm has low requirement of sampling synchronization, small wide-area communication flow, and high fault tolerance. PMID:25050399

Textual appropriation in engineering master's theses: a preliminary study.

PubMed

Eckel, Edward J

2011-09-01

In the thesis literature review, an engineering graduate student is expected to place original research in the context of previous work by other researchers. However, for some students, particularly those for whom English is a second language, the literature review may be a mixture of original writing and verbatim source text appropriated without quotations. Such problematic use of source material leaves students vulnerable to an accusation of plagiarism, which carries severe consequences. Is such textual appropriation common in engineering master's writing? Furthermore, what, if anything, can be concluded when two texts have been found to have textual material in common? Do existing definitions of plagiarism provide a sufficient framework for determining if an instance of copying is transgressive or not? In a preliminary attempt to answer these questions, text strings from a random sample of 100 engineering master's theses from the ProQuest Dissertations and Theses database were searched for appropriated verbatim source text using the Google search engine. The results suggest that textual borrowing may indeed be a common feature of the master's engineering literature review, raising questions about the ability of graduate students to synthesize the literature. The study also illustrates the difficulties of making a determination of plagiarism based on simple textual similarity. A context-specific approach is recommended when dealing with any instance of apparent copying.

A Comparative Study of Four Methods for the Detection of Nematode Eggs and Large Protozoan Cysts in Mandrill Faecal Material.

PubMed

Pouillevet, Hanae; Dibakou, Serge-Ely; Ngoubangoye, Barthélémy; Poirotte, Clémence; Charpentier, Marie J E

2017-01-01

Coproscopical methods like sedimentation and flotation techniques are widely used in the field for studying simian gastrointestinal parasites. Four parasites of known zoonotic potential were studied in a free-ranging, non-provisioned population of mandrills (Mandrillus sphinx): 2 nematodes (Necatoramericanus/Oesophagostomum sp. complex and Strongyloides sp.) and 2 protozoan species (Balantidium coli and Entamoeba coli). Different coproscopical techniques are available but they are rarely compared to evaluate their efficiency to retrieve parasites. In this study 4 different field-friendly methods were compared. A sedimentation method and 3 different McMaster methods (using sugar, salt, and zinc sulphate solutions) were performed on 47 faecal samples collected from different individuals of both sexes and all ages. First, we show that McMaster flotation methods are appropriate to detect and thus quantify large protozoan cysts. Second, zinc sulphate McMaster flotation allows the retrieval of a higher number of parasite taxa compared to the other 3 methods. This method further shows the highest probability to detect each of the studied parasite taxa. Altogether our results show that zinc sulphate McMaster flotation appears to be the best technique to use when studying nematodes and large protozoa. © 2017 S. Karger AG, Basel.

African Primary Care Research: qualitative interviewing in primary care.

PubMed

Reid, Steve; Mash, Bob

2014-06-05

This article is part of a series on African Primary Care Research and focuses on the topic of qualitative interviewing in primary care. In particular it looks at issues of study design, sample size, sampling and interviewing in relation to individual and focus group interviews.There is a particular focus on helping postgraduate students at a Masters level to write their research proposals.

A sampling plan for conduit-flow karst springs: Minimizing sampling cost and maximizing statistical utility

USGS Publications Warehouse

Currens, J.C.

1999-01-01

Analytical data for nitrate and triazines from 566 samples collected over a 3-year period at Pleasant Grove Spring, Logan County, KY, were statistically analyzed to determine the minimum data set needed to calculate meaningful yearly averages for a conduit-flow karst spring. Results indicate that a biweekly sampling schedule augmented with bihourly samples from high-flow events will provide meaningful suspended-constituent and dissolved-constituent statistics. Unless collected over an extensive period of time, daily samples may not be representative and may also be autocorrelated. All high-flow events resulting in a significant deflection of a constituent from base-line concentrations should be sampled. Either the geometric mean or the flow-weighted average of the suspended constituents should be used. If automatic samplers are used, then they may be programmed to collect storm samples as frequently as every few minutes to provide details on the arrival time of constituents of interest. However, only samples collected bihourly should be used to calculate averages. By adopting a biweekly sampling schedule augmented with high-flow samples, the need to continuously monitor discharge, or to search for and analyze existing data to develop a statistically valid monitoring plan, is lessened.Analytical data for nitrate and triazines from 566 samples collected over a 3-year period at Pleasant Grove Spring, Logan County, KY, were statistically analyzed to determine the minimum data set needed to calculate meaningful yearly averages for a conduit-flow karst spring. Results indicate that a biweekly sampling schedule augmented with bihourly samples from high-flow events will provide meaningful suspended-constituent and dissolved-constituent statistics. Unless collected over an extensive period of time, daily samples may not be representative and may also be autocorrelated. All high-flow events resulting in a significant deflection of a constituent from base-line concentrations should be sampled. Either the geometric mean or the flow-weighted average of the suspended constituents should be used. If automatic samplers are used, then they may be programmed to collect storm samples as frequently as every few minutes to provide details on the arrival time of constituents of interest. However, only samples collected bihourly should be used to calculate averages. By adopting a biweekly sampling schedule augmented with high-flow samples, the need to continuously monitor discharge, or to search for and analyze existing data to develop a statistically valid monitoring plan, is lessened.

The Challenges of Integrating NASA's Human, Budget, and Data Capital within the Constellation Program's Exploration Launch Projects Office

NASA Technical Reports Server (NTRS)

Kidd, Luanne; Morris, Kenneth B.; Self, Tim

2006-01-01

The U.S. Vision for Space Exploration directs NASA to retire the Space Shuttle in 2010 and replace it with safe, reliable, and cost-effective space transportation systems for crew and cargo travel to the Moon, Mars, and beyond. Such emerging space transportation initiatives face massive organizational challenges, including building and nurturing an experienced, dedicated team with the right skills for the required tasks; allocating and tracking the fiscal capital invested in achieving technical progress against an integrated master schedule; and turning generated data into usehl knowledge that equips the team to design and develop superior products for customers and stakeholders. This paper discusses how NASA's Exploration Launch Projects Office, which is responsible for delivering these new launch vehicles, integrates these resources to create an engineering business environment that promotes mission success.

Causal network analysis of head and neck keloid tissue identifies potential master regulators.

PubMed

Garcia-Rodriguez, Laura; Jones, Lamont; Chen, Kang Mei; Datta, Indrani; Divine, George; Worsham, Maria J

2016-10-01

To generate novel insights and hypotheses in keloid development from potential master regulators. Prospective cohort. Six fresh keloid and six normal skin samples from 12 anonymous donors were used in a prospective cohort study. Genome-wide profiling was done previously on the cohort using the Infinium HumanMethylation450 BeadChip (Illumina, San Diego, CA). The 190 statistically significant CpG islands between keloid and normal tissue mapped to 152 genes (P < .05). The top 10 statistically significant genes (VAMP5, ACTR3C, GALNT3, KCNAB2, LRRC61, SCML4, SYNGR1, TNS1, PLEKHG5, PPP1R13-α, false discovery rate <.015) were uploaded into the Ingenuity Pathway Analysis software's Causal Network Analysis (QIAGEN, Redwood City, CA). To reflect expected gene expression direction in the context of methylation changes, the inverse of the methylation ratio from keloid versus normal tissue was used for the analysis. Causal Network Analysis identified disease-specific master regulator molecules based on downstream differentially expressed keloid-specific genes and expected directionality of expression (hypermethylated vs. hypomethylated). Causal Network Analysis software identified four hierarchical networks that included four master regulators (pyroxamide, tributyrin, PRKG2, and PENK) and 19 intermediate regulators. Causal Network Analysis of differentiated methylated gene data of keloid versus normal skin demonstrated four causal networks with four master regulators. These hierarchical networks suggest potential driver roles for their downstream keloid gene targets in the pathogenesis of the keloid phenotype, likely triggered due to perturbation/injury to normal tissue. NA Laryngoscope, 126:E319-E324, 2016. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

Exploring the thesis experience of Master of Health professions education graduates: a qualitative study.

PubMed

Skeith, Leslie; Ridinger, Heather; Srinivasan, Sushant; Givi, Babak; Youssef, Nazih; Harris, Ilene

2018-04-27

To explore the thesis experience of recent Master of Health Professions Education (MHPE) graduates in the University of Illinois at Chicago (UIC) program. This is a qualitative case study exploring the experience of MHPE graduates between 2014 and 2016 (n=31). Using convenience sampling, all graduates with an email address (n=30) were invited to participate in an online survey and semi-structured interviews. Interviews were completed in-person or via telephone or video conference; interviewers collected detailed notes and audio recordings.  Two authors independently analyzed the data iteratively using thematic analysis and discrepancies were discussed and resolved. Survey results (n=20, 67%) revealed an average graduation of 5.1 years; 10 graduates (33%) were interviewed. Three themes related to the thesis experience were identified: success factors, challenges, and outcomes. Success factors, when present, promoted completion of a thesis; these included: a supportive program environment, time management, available resources, MHPE foundational coursework, aligning theses with career goals, and identifying a project with limited scope. Challenges made thesis completion more difficult for graduates; these included: institutional factors, personal or professional responsibilities, burnout, externally-imposed deadlines, and barriers in the research process. Despite these challenges, completing the thesis resulted in many professional or personal benefits (outcomes). Multiple success factors and challenges were identified in the master's thesis process among MHPE graduates at UIC. These findings can help students conducting education-based scholarship through the master's thesis process. This study also informs program evaluation and improvements and outlines personal and professional outcomes of completing a master's thesis.

The Spanish Diagnostic Interview Schedule. Reliability and concordance with clinical diagnoses in Puerto Rico.

PubMed

Canino, G J; Bird, H R; Shrout, P E; Rubio-Stipec, M; Bravo, M; Martinez, R; Sesman, M; Guzman, A; Guevara, L M; Costas, H

1987-08-01

A Spanish translation of the Diagnostic Interview Schedule (DIS) was assessed using samples of Puerto Rican patients and community subjects from the San Juan area. Concordance between DIS results from psychiatrists' interviews and from laypersons' interviews was similar to results with the DIS in mainland samples. Comparisons of laypersons' DIS results with psychiatrists' clinical diagnoses yielded generally poorer agreement. Levels of agreement improved when diagnoses were clustered into higher-rank categories. These results raise cultural issues related to the use of the DIS in Puerto Rico.

Model-Based Design of Long-Distance Tracer Transport Experiments in Plants.

PubMed

Bühler, Jonas; von Lieres, Eric; Huber, Gregor J

2018-01-01

Studies of long-distance transport of tracer isotopes in plants offer a high potential for functional phenotyping, but so far measurement time is a bottleneck because continuous time series of at least 1 h are required to obtain reliable estimates of transport properties. Hence, usual throughput values are between 0.5 and 1 samples h -1 . Here, we propose to increase sample throughput by introducing temporal gaps in the data acquisition of each plant sample and measuring multiple plants one after each other in a rotating scheme. In contrast to common time series analysis methods, mechanistic tracer transport models allow the analysis of interrupted time series. The uncertainties of the model parameter estimates are used as a measure of how much information was lost compared to complete time series. A case study was set up to systematically investigate different experimental schedules for different throughput scenarios ranging from 1 to 12 samples h -1 . Selected designs with only a small amount of data points were found to be sufficient for an adequate parameter estimation, implying that the presented approach enables a substantial increase of sample throughput. The presented general framework for automated generation and evaluation of experimental schedules allows the determination of a maximal sample throughput and the respective optimal measurement schedule depending on the required statistical reliability of data acquired by future experiments.

The U.S. Geological Survey Geologic Collections Management System (GCMS)—A master catalog and collections management plan for U.S. Geological Survey geologic samples and sample collections

USGS Publications Warehouse

,

2015-01-01

The general consideration for implementation of the GCMS is that all active USGS geologic sample repositories will form the core of GCMS and that participating science centers will develop procedures based on proposed GCMS methodologies. The GCMS is a collective resource for the entire USGS community and the users who discover the geologic materials kept in these repositories and seek to access them.

Application of a New Grain-Based Reconstruction Algorithm to Microtomography Images for Quantitative Characterization and Flow Modeling

DTIC Science & Technology

2008-06-01

mapping the X-ray absorption through the sample. The amount of absorption depends on the chemical composition and structure of the material and the X...obtained by measuring the X-ray attenua- tion coefficients of the sample at different angles as the sample is rotated about the vertical axis. These... McMaster University, Hamilton, Ontario, Canada. Allen H. Reed is a geologist with the Naval Research Laboratory. His research interests are in marine

Psychometric Properties of the Schedule for Nonadaptive and Adaptive Personality in a PTSD Sample

ERIC Educational Resources Information Center

Wolf, Erika J.; Harrington, Kelly M.; Miller, Mark W.

2011-01-01

This study evaluated the psychometric characteristics of the Schedule for Nonadaptive and Adaptive Personality (SNAP; Clark, 1996) in 280 individuals who screened positive for posttraumatic stress disorder (PTSD). The SNAP validity, trait, temperament, and personality disorder (PD) scales were compared with scales on the Brief Form of the…

Flexibility for Vocational Education through Computer Scheduling. Quarterly Report.

ERIC Educational Resources Information Center

Allen, Dwight W.

This progress report of a 2-year project (ending April 30, 1968) offers a random sampling of course schedule configurations and specific course performance criteria submitted to the Stanford project staff for evaluation and comment, and a brief statement of the project's data collection and data evaluation objectives. The project seeks to…

Effects of within-Class Differences in Sample Responding on Acquired Sample Equivalence

ERIC Educational Resources Information Center

Urcuioli, Peter J.; Vasconcelos, Maarco

2008-01-01

Two experiments examined whether acquired sample equivalence in many-to-one matching was affected by variation in sample-response requirements. In each experiment, pigeons responded on either identical or different response schedules to the sample stimuli that occasioned the same reinforced comparison choice (i.e., to the within-class samples).…

7 CFR 275.4 - Record retention.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Stamps and Medicaid Quality Control Reviews, FNS-380-1, Integrated Review Schedule, FNS-245, Negative... materials supporting the review decision; sample lists; sampling frames; tabulation sheets; and reports of...

Statistical analysis of stream water-quality data and sampling network design near Oklahoma City, central Oklahoma, 1977-1999

USGS Publications Warehouse

Brigham, Mark E.; Payne, Gregory A.; Andrews, William J.; Abbott, Marvin M.

2002-01-01

The sampling network was evaluated with respect to areal coverage, sampling frequency, and analytical schedules. Areal coverage could be expanded to include one additional watershed that is not part of the current network. A new sampling site on the North Canadian River might be useful because of expanding urbanization west of the city, but sampling at some other sites could be discontinued or reduced based on comparisons of data between the sites. Additional real-time or periodic monitoring for dissolved oxygen may be useful to prevent anoxic conditions in pools behind new low-water dams. The sampling schedules, both monthly and quarterly, are adequate to evaluate trends, but additional sampling during flow extremes may be needed to quantify loads and evaluate water-quality during flow extremes. Emerging water-quality issues may require sampling for volatile organic compounds, sulfide, total phosphorus, chlorophyll-a, Esherichia coli, and enterococci, as well as use of more sensitive laboratory analytical methods for determination of cadmium, mercury, lead, and silver.

Firefighter Shift Schedules Affect Sleep Quality.

PubMed

Billings, Joel; Focht, Will

2016-03-01

The aim of this study was to investigate the prevalence and severity of firefighter sleep quality across department shift schedules. Sleep quality was assessed using a Pittsburgh Sleep Quality Index in a sample of 109 male career firefighters from six fire departments in three Southwestern US states. The three shift schedules studied were 24on/48off, 48on/96off, and Kelly. Seventy-three percent of firefighters report poor sleep quality. The 24on/48off shift schedule is associated with the best sleep quality and Kelly is associated with the worst sleep quality. Firefighters working second jobs report significantly poorer sleep quality than those who do not. Shift schedules that disrupt normal circadian rhythms more result in poorer sleep quality, which can lead to less effective emergency response and increased risk to firefighter health and safety.

Comparative Study of Job Burnout Among Critical Care Nurses With Fixed and Rotating Shift Schedules

PubMed Central

Shamali, Mahdi; Shahriari, Mohsen; Babaii, Atye; Abbasinia, Mohammad

2015-01-01

Background: Nurses, as health care providers, are insurmountably obliged to the practice of shift work. Literature has reported shift working as one of the inducing factors of burnout. Despite numerous studies in this area, there are inconsistencies on the relationship between shift working and burnout among nurses, especially in those who work in critical care settings. Objectives: The aim of this study was to compare the occupational burnout in critical care nurses with and without fixed shift schedules. Patients and Methods: In this comparative study, 130 nurses with rotating shift schedule and 130 nurses with fixed shift schedule from six university hospitals were selected using stratified random sampling. Maslach burnout inventory was used for data collection. Independent samples t-test, chi-square and one-way ANOVA tests were used to analyze the data. Results: Most of the participants were females (62.7%), aged between 22 - 29 years (38.5%), married (59.2%), and had a bachelor degree (86.9%). The mean score of emotional exhaustion was significantly higher in nurses with fixed shift schedules (P < 0.001). However, no significant difference was found between the mean scores of the two groups in the personal accomplishment and depersonalization subscales (P > 0.05). Moreover, no significant difference was found in burnout mean scores between nurses with fixed morning and fixed night shifts (P > 0.05). The means of the emotional exhaustion subscale were significantly different in nurses with different characteristics (P < 0.05) except the gender and working unit. Conclusions: As a result of this study, it was found that critical care nurses with fixed shift schedules display more burnout in emotional exhaustion dimension, compared to those working with rotating shift schedules. PMID:26576442

Development of a national geodatabase (Greece) for soil surveys and land evaluation using space technology and GIS

NASA Astrophysics Data System (ADS)

Bilas, George; Dionysiou, Nina; Karapetsas, Nikolaos; Silleos, Nikolaos; Kosmas, Konstantinos; Misopollinos, Nikolaos

2016-04-01

This project was funded by OPEKEPE, Ministry of Agricultural Development and Food, Greece and involves development of a national geodatabase and a WebGIS that encompass soil data of all the agricultural areas of Greece in order to supply the country with a multi-purpose master plan for agricultural land management. The area mapped covered more than 385,000 ha divided in more than 9.000 Soil Mapping Units (SMUs) based on physiographic analysis, field work and photo interpretation of satellite images. The field work included description and sampling in three depths (0-30, 30-60 and >60 cm) of 2,000 soil profiles and 8,000 augers (sampling 0-30 and >30 cm). In total more than 22,000 soil samples were collected and analyzed for determining main soil properties associated with soil classification and soil evaluation. Additionally the project included (1) integration of all data in the Soil Geodatabase, (2) finalization of SMUs, (3) development of a Master Plan for Agricultural Land Management and (4) development and operational testing of the Web Portal for e-information and e-services. The integrated system is expected, after being fully operational, to provide important electronic services and benefits to farmers, private sector and governmental organizations. An e-book with the soil maps of Greece was also provided including 570 sheets with data description and legends. The Master Plan for Agricultural Land Management includes soil quality maps for 30 agricultural crops, together with maps showing soil degradation risks, such as erosion, desertification, salinity and nitrates, thus providing the tools for soil conservation and sustainable land management.

Viscoelastic characterization of thin-film polymers exposed to low Earth orbit

NASA Technical Reports Server (NTRS)

Letton, Alan; Farrow, Allan; Strganac, Thomas

1993-01-01

The materials made available through the Long Duration Exposure Facility (LDEF) satellite provide a set of specimens that can be well characterized and have a known exposure history with reference to atomic oxygen and ultraviolet radiation exposure. Mechanical characteristics measured from control samples and exposed samples provide a data base for predicting the behavior of polymers in low earth orbit. Samples of 1.0 mil thick low density polyethylene were exposed to the low earth orbit environment for a period of six years. These materials were not directly exposed to ram atomic oxygen and offer a unique opportunity for measuring the effect of atomic oxygen and UV radiation on mechanical properties with little concern to the effect of erosion. The viscoelastic characteristics of these materials were measured and compared to the viscoelastic characteristics of control samples. To aid in differentiating the effects of changes in crystallinity resulting from thermal cycling, from the effects of changes in chemical structure resulting from atomic oxygen/UV attack to the polymer, a second set of control specimens, annealed to increase crystallinity, were measured as well. The resulting characterization of these materials will offer insight into the impact of atomic oxygen/UV on the mechanical properties of polymeric materials. The viscoelastic properties measured for the control, annealed, and exposed specimens were the storage and loss modulus as a function of frequency and temperature. From these datum is calculated the viscoelastic master curve derived using the principle of time/temperature superposition. Using the master curve, the relaxation modulus is calculated using the method of Ninomiya and Ferry. The viscoelastic master curve and the stress relaxation modulus provide a direct measure of the changes in the chemical or morphological structure. In addition, the effect of these changes on long-term and short-term mechanical properties is known directly. It should be noted that the dependence on directionality for the polymer films was considered since these films were manufactured by a blown-film process.

Nonstandard Work Schedules, Family Dynamics, and Mother-Child Interactions During Early Childhood.

PubMed

Prickett, Kate C

2018-03-01

The rising number of parents who work nonstandard schedules has led to a growing body of research concerned with what this trend means for children. The negative outcomes for children of parents who work nonstandard schedules are thought to arise from the disruptions these schedules place on family life, and thus, the types of parenting that support their children's development, particularly when children are young. Using a nationally representative sample of two-parent families (Early Childhood Longitudinal Study-Birth cohort, n = 3,650), this study examined whether mothers' and their partners' nonstandard work schedules were associated with mothers' parenting when children were 2 and 4 years old. Structural equation models revealed that mothers' and their partners' nonstandard work schedules were associated with mothers' lower scores on measures of positive and involved parenting. These associations were mediated by fathers' lower levels of participation in cognitively supportive parenting and greater imbalance in cognitively supportive tasks conducted by mothers versus fathers.

Ammonia. Training Module 5.110.2.77.

ERIC Educational Resources Information Center

Kirkwood Community Coll., Cedar Rapids, IA.

This document is an instructional module package prepared in objective form for use by an instructor familiar with analytical procedures for determining ammonia nitrogen concentrations in a water or wastewater sample. Included are objectives, instructor guides, student handouts, and transparency masters. This module considers preliminary…

Teaching Research Methodology through Active Learning

ERIC Educational Resources Information Center

Lundahl, Brad W.

2008-01-01

To complement traditional learning activities in a masters-level research methodology course, social work students worked on a formal research project which involved: designing the study, constructing measures, selecting a sampling strategy, collecting data, reducing and analyzing data, and finally interpreting and communicating the results. The…

VizieR Online Data Catalog: QSOs selection from SDSS and WISE (Richards+, 2015)

NASA Astrophysics Data System (ADS)

Richards, G. T.; Myers, A. D.; Peters, C. M.; Krawczyk, C. M.; Chase, G.; Ross, N. P.; Fan, X.; Jiang, L.; Lacy, M.; McGreer, I. D.; Trump, J. R.; Riegel, R. N.

2015-10-01

We construct the master quasar catalog by gathering samples of spectroscopically confirmed quasars within the SDSS-I/II/III (York et al. 2000AJ....120.1579Y; Eisenstein et al. 2011AJ....142...72E) footprint. (2 data files).

Multicultural Training Experiences as Predictors of Multicultural Competencies: Students' Perspectives

ERIC Educational Resources Information Center

Dickson, Ginger L.; Jepsen, David A.

2007-01-01

The authors surveyed a national sample of master's-level counseling students regarding their multicultural training experiences and their multicultural counseling competencies. A series of hierarchical regression models tested the prediction of inventoried competencies from measures of selected training experiences: (a) program cultural ambience…

10 CFR 74.45 - Measurements and measurement control.

Code of Federal Regulations, 2013 CFR

2013-01-01

... measurements, obtaining samples, and performing laboratory analyses for element concentration and isotope... of random error behavior. On a predetermined schedule, the program shall include, as appropriate: (i) Replicate analyses of individual samples; (ii) Analysis of replicate process samples; (iii) Replicate volume...

10 CFR 74.45 - Measurements and measurement control.

Code of Federal Regulations, 2014 CFR

2014-01-01

... measurements, obtaining samples, and performing laboratory analyses for element concentration and isotope... of random error behavior. On a predetermined schedule, the program shall include, as appropriate: (i) Replicate analyses of individual samples; (ii) Analysis of replicate process samples; (iii) Replicate volume...

10 CFR 74.45 - Measurements and measurement control.

Code of Federal Regulations, 2012 CFR

2012-01-01

... measurements, obtaining samples, and performing laboratory analyses for element concentration and isotope... of random error behavior. On a predetermined schedule, the program shall include, as appropriate: (i) Replicate analyses of individual samples; (ii) Analysis of replicate process samples; (iii) Replicate volume...

A Comparison of Synoptic Classification Methods for Application to Wind Power Prediction

NASA Astrophysics Data System (ADS)

Fowler, P.; Basu, S.

2008-12-01

Wind energy is a highly variable resource. To make it competitive with other sources of energy for integration on the power grid, at the very least, a day-ahead forecast of power output must be available. In many grid operations worldwide, next-day power output is scheduled in 30 minute intervals and grid management routinely occurs at real time. Maintenance and repairs require costly time to complete and must be scheduled along with normal operations. Revenue is dependent on the reliability of the entire system. In other words, there is financial and managerial benefit to short-term prediction of wind power. One approach to short-term forecasting is to combine a data centric method such as an artificial neural network with a physically based approach like numerical weather prediction (NWP). The key is in associating high-dimensional NWP model output with the most appropriately trained neural network. Because neural networks perform the best in the situations they are designed for, one can hypothesize that if one can identify similar recurring states in historical weather data, this data can be used to train multiple custom designed neural networks to be used when called upon by numerical prediction. Identifying similar recurring states may offer insight to how a neural network forecast can be improved, but amassing the knowledge and utilizing it efficiently in the time required for power prediction would be difficult for a human to master, thus showing the advantage of classification. Classification methods are important tools for short-term forecasting because they can be unsupervised, objective, and computationally quick. They primarily involve categorizing data sets in to dominant weather classes, but there are numerous ways to define a class and a great variety in interpretation of the results. In the present study a collection of classification methods are used on a sampling of atmospheric variables from the North American Regional Reanalysis data set. The results will be discussed in relation to their use for short-term wind power forecasting by neural networks.

Diagnosing Autism Spectrum Disorders in Adults: The Use of Autism Diagnostic Observation Schedule (ADOS) Module 4

ERIC Educational Resources Information Center

Bastiaansen, Jojanneke A.; Meffert, Harma; Hein, Simone; Huizinga, Petra; Ketelaars, Cees; Pijnenborg, Marieke; Bartels, Arnold; Minderaa, Ruud; Keysers, Christian; de Bildt, Annelies

2011-01-01

Autism Diagnostic Observation Schedule (ADOS) module 4 was investigated in an independent sample of high-functioning adult males with an autism spectrum disorder (ASD) compared to three specific diagnostic groups: schizophrenia, psychopathy, and typical development. ADOS module 4 proves to be a reliable instrument with good predictive value. It…

Psychometric Properties of the Disability Assessment Schedule (DAS) for Behavior Problems: An Independent Investigation

ERIC Educational Resources Information Center

Tsakanikos, Elias; Underwood, Lisa; Sturmey, Peter; Bouras, Nick; McCarthy, Jane

2011-01-01

The present study employed the Disability Assessment Schedule (DAS) to assess problem behaviors in a large sample of adults with ID (N = 568) and evaluate the psychometric properties of this instrument. Although the DAS problem behaviors were found to be internally consistent (Cronbach's [alpha] = 0.87), item analysis revealed one weak item…

Nonstandard Work Schedules, Perceived Family Well-Being, and Daily Stressors

ERIC Educational Resources Information Center

Davis, Kelly D.; Goodman, W. Benjamin; Pirretti, Amy E.; Almeida, David M.

2008-01-01

Data from two studies assessed the effects of nonstandard work schedules on perceived family well-being and daily stressors. Study 1, using a sample of employed, married adults aged 25-74 (n = 1,166) from the National Survey of Midlife in the United States, showed that night work was associated with perceptions of greater marital instability,…

NHEXAS PHASE I MARYLAND STUDY--STANDARD OPERATING PROCEDURE FOR FIELD SAMPLING--GENERAL INFORMATION (F01)

EPA Science Inventory

The purpose of this SOP is to provide an overview of field sampling procedures. This SOP details the samples taken, the responsibilities of the field staff, an approximate schedule for field operations, persons responsible for analyses, equipment used for sampling, and contents ...

Development and characterization of high refractive index and high scattering acrylate polymer layers

NASA Astrophysics Data System (ADS)

Eiselt, Thomas; Gomard, Guillaume; Preinfalk, Jan; Gleissner, Uwe; Lemmer, Uli; Hanemann, Thomas

2016-04-01

The aim is to develop a polymer layer which has the ability to diffuse light homogeneously and exhibit a high refractive index. The mixtures are containing an acrylate casting resin, benzylmethacrylate, phenanthrene and other additives. Phenanthrene is employed to increase the refractive index. The mixtures are first rheologically characterized and then polymerized with heat and UV radiation. For the refractive index measurements the polymerized samples require a planar surface without air bubbles. To produce flat samples a special construction consisting of a glass plate, a teflon sheet, a silicone ring (PDMS mold), another teflon sheet and another glass plate is developed. Glue clamps are used to fix this construction together. Selected samples have a refractive index of 1.585 at 20°C at a wavelength of 589nm. A master mixture with a high refractive index is taken for further experiments. Nano scaled titanium dioxide is added and dispersed into the master mixture and then spin coated on a glass substrate. These layers are optically characterized. The specular transmission and the overall transmission are measured to investigate the degree of scattering, which is defined as the haze. Most of the presented layers express the expected haze of over 50%.

Development and characterization of high refractive index and high scattering acrylate polymer layers

NASA Astrophysics Data System (ADS)

Eiselt, Thomas; Gomard, Guillaume; Preinfalk, Jan; Gleißner, Uwe; Lemmer, Uli; Hanemann, Thomas

2016-11-01

In this work, we develop a wet-processable scattering layer exhibiting a high refractive index that can be used in organic light-emitting diodes for light outcoupling purposes. The composite layers contain an acrylate casting resin, benzylmethacrylate, and phenanthrene, which is employed to increase the refractive index. The mixtures are first rheologically characterized and then polymerized with heat and UV radiation. For the refractive index measurements, the polymerized samples require a planar surface without air bubbles. To produce flat samples, a special construction consisting of a glass plate, a teflon sheet, a silicone ring (PDMS mold), another teflon sheet, and another glass plate is developed. Glue clamps are used to hold the construction together. The refractive index of the samples can be increased from 1.565 to 1.585 at 20°C at a wavelength of 589 nm following the addition of 20 wt% phenanthrene. A master mixture with a high refractive index is taken for further experiments. Nanoscaled titanium dioxide is added and dispersed into the master mixture and then spin coated on a glass substrate. These layers are optically characterized. Most of the presented layers present the expected haze of over 50%.

Practice Oriented Master's in Optics

NASA Technical Reports Server (NTRS)

Dimmock, John O.

1998-01-01

The development of an interdisciplinary Masters Program with a concentration in Optics and Photonics Technology has been is described. This program was developed under the U.S. Manufacturing Education and Training Activity of the Technology Reinvestment Project. This development was a collaboration between the University of Alabama in Huntsville (UAH), Alabama A&M University, Northwest Shoals Community College, the NASA Marshall Space Flight Center (MSFC), the U.S. Army Missile Command, Oak Ridge National Laboratory (ORNL), Advanced Optical Systems Inc., Dynetics, Inc., Hughes Danbury Optical Systems, Inc., Nichols Research and Speedring Inc. These organizations as well as the National Institute for Standards and Technology and SCI, Inc. have been participating fully in the design, development and implementation of this program. This goal of the program is to produce highly trained graduates who can also solve practical problems. To this end, the program includes an on-site practicum at a manufacturing location. The broad curriculum of this program emphasizes the fundamentals of optics, optical systems manufacturing and testing, and the principles of design and manufacturing to cost for commercial products. The Master's of Science (MS) in Physics and Master's of Science in Engineering (MSE) in Electrical Engineering Degrees with concentration in Optics and Photonics Technology are offered by the respective UAH academic departments with support from and in consultation with a Steering Committee composed of representatives from each of the participating organizations, and a student representative from UAH. The origins of the programs are described. The curricula of the programs is described. The course outlines of the new courses which were developed for the new curriculum are included. Also included are samples of on-site practicums which the students have been involved in. Also included as attachments are samples of the advertisements, which includes flyers, and the program description given to prospective students. The expenditures in the development and information about the cost sharing among the participating organizations is also included. Finally a listing membership of the steering committee is attached.

An investigation of the use of temporal decomposition in space mission scheduling

NASA Technical Reports Server (NTRS)

Bullington, Stanley E.; Narayanan, Venkat

1994-01-01

This research involves an examination of techniques for solving scheduling problems in long-duration space missions. The mission timeline is broken up into several time segments, which are then scheduled incrementally. Three methods are presented for identifying the activities that are to be attempted within these segments. The first method is a mathematical model, which is presented primarily to illustrate the structure of the temporal decomposition problem. Since the mathematical model is bound to be computationally prohibitive for realistic problems, two heuristic assignment procedures are also presented. The first heuristic method is based on dispatching rules for activity selection, and the second heuristic assigns performances of a model evenly over timeline segments. These heuristics are tested using a sample Space Station mission and a Spacelab mission. The results are compared with those obtained by scheduling the missions without any problem decomposition. The applicability of this approach to large-scale mission scheduling problems is also discussed.

Job Design and Ethnic Differences in Working Women’s Physical Activity

PubMed Central

Grzywacz, Joseph G.; Crain, A. Lauren; Martinson, Brian C.; Quandt, Sara A.

2014-01-01

Objective To document the role job control and schedule control play in shaping women’s physical activity, and how it delineates educational and racial variability in associations of job and social control with physical activity. Methods Prospective data were obtained from a community-based sample of working women (N = 302). Validated instruments measured job control and schedule control. Steps per day were assessed using New Lifestyles 800 activity monitors. Results Greater job control predicted more steps per day, whereas greater schedule control predicted fewer steps. Small indirect associations between ethnicity and physical activity were observed among women with a trade school degree or less but not for women with a college degree. Conclusions Low job control created barriers to physical activity among working women with a trade school degree or less. Greater schedule control predicted less physical activity, suggesting women do not use time “created” by schedule flexibility for personal health enhancement. PMID:24034681

Job design and ethnic differences in working women's physical activity.

PubMed

Grzywacz, Joseph G; Crain, A Lauren; Martinson, Brian C; Quandt, Sara A

2014-01-01

To document the role job control and schedule control play in shaping women's physical activity, and how it delineates educational and racial variability in associations of job and social control with physical activity. Prospective data were obtained from a community-based sample of working women (N = 302). Validated instruments measured job control and schedule control. Steps per day were assessed using New Lifestyles 800 activity monitors. Greater job control predicted more steps per day, whereas greater schedule control predicted fewer steps. Small indirect associations between ethnicity and physical activity were observed among women with a trade school degree or less but not for women with a college degree. Low job control created barriers to physical activity among working women with a trade school degree or less. Greater schedule control predicted less physical activity, suggesting women do not use time "created" by schedule flexibility for personal health enhancement.

State of Alaska Fire Service Training. Instructor Certification Standards.

ERIC Educational Resources Information Center

Hagevig, William

Designed for local Alaskan fire departments, this pamphlet provides the criteria and qualifications for certificates of firefighter instructors (basic, advanced, master), a list of approved subject categories for each level of certification, sample certification applications, a list of resource publications, and a training course outline (basic…

Entrepreneurial Attributes among Postgraduate Students of a Pakistani University

ERIC Educational Resources Information Center

Ali, Akhtar; Topping, Keith J.; Tariq, Riaz H.

2010-01-01

This paper explores entrepreneurial attributes among the students of The Islamia University of Bahawalpur, a public sector Pakistani university. Multistage sampling was employed to maximize the representation. Five hundred and twenty one master's level students from thirty departments returned completed questionnaires. Three factors emerged: self…

Asteroid Redirect Mission: EVA and Sample Collection

NASA Technical Reports Server (NTRS)

Abell, Paul; Stich, Steve

2015-01-01

Asteroid Redirect Mission (ARM) Overview (1) Notional Development Schedule, (2) ARV Crewed Mission Accommodations; Asteroid Redirect Crewed Mission (ARCM) Mission Summary; ARCM Accomplishments; Sample collection/curation plan (1) CAPTEM Requirements; SBAG Engagement Plan

Annealed importance sampling with constant cooling rate

NASA Astrophysics Data System (ADS)

Giovannelli, Edoardo; Cardini, Gianni; Gellini, Cristina; Pietraperzia, Giangaetano; Chelli, Riccardo

2015-02-01

Annealed importance sampling is a simulation method devised by Neal [Stat. Comput. 11, 125 (2001)] to assign weights to configurations generated by simulated annealing trajectories. In particular, the equilibrium average of a generic physical quantity can be computed by a weighted average exploiting weights and estimates of this quantity associated to the final configurations of the annealed trajectories. Here, we review annealed importance sampling from the perspective of nonequilibrium path-ensemble averages [G. E. Crooks, Phys. Rev. E 61, 2361 (2000)]. The equivalence of Neal's and Crooks' treatments highlights the generality of the method, which goes beyond the mere thermal-based protocols. Furthermore, we show that a temperature schedule based on a constant cooling rate outperforms stepwise cooling schedules and that, for a given elapsed computer time, performances of annealed importance sampling are, in general, improved by increasing the number of intermediate temperatures.

An Evaluation of GuttaFlow2 in Filling Artificial Internal Resorption Cavities: An in vitro Study.

PubMed

Mohammad, Yara; Alafif, Hisham; Hajeer, Mohammad; Yassin, Oula

2016-06-01

Obturation of root canal with internal resorption represents a major challenge in Endodontics. In spite of that, usual obturation techniques are often employed without considering the best technique to solve this problem. The goal of this study was to investigate the ability of GuttaFlow2 in filling artificial internal resorption cavities. The study sample included 36 human upper central incisors that were prepared using Protaper system (F4). Internal resorption cavities were prepared by cutting each tooth at 7 mm from the apex and preparing hemispherical cavities on both the sides and then re-attaching them. The sample was randomly separated into three groups (n = 12 in each group). In the first group, thermal injection technique (Obtura II) was employed and served as the control group. In the second group, injection of cold free-flow obturation technique with a master cone (GF2-C) was employed, whereas in the third group injection of cold free-flow obturation without a master cone (GF2) was followed. The teeth were re-cut at the same level as before and examined under a stereomicroscope. Subsequently, the captured images were transferred to AutoCAD program to measure the percentage of total filling "TF," gutta-percha "G," sealer "S," and voids "V" out of the total surface of the cross sections. All materials showed high filling properties in terms of "total filling," ranging from 99.17% (for Obtura II) to 99.72% (for GF2-C). Regarding gutta-percha percentages of filling, they ranged from 83.15 to 83.93%, whereas those for the sealer ranged from 5.71 to 15.24%. GuttaFlow2 group with a master cone appeared to give the best results despite the insignificant differences among the three groups. The GuttaFlow2 with a master cone technique seemed to be a promising filling material and gave results similar to those observed with Obtura II. It is recommended for use to obturate internal resorption cavities in clinical practice due to its good adaptability to root canal walls, ease of handling, and application. Internal resorption defects can be successfully filled with GuttaFlow2 material when supplemented with a master cone, and the results are comparable with those obtained with the Obtura II technique.

Dim light at night disturbs the daily sleep-wake cycle in the rat.

PubMed

Stenvers, Dirk Jan; van Dorp, Rick; Foppen, Ewout; Mendoza, Jorge; Opperhuizen, Anne-Loes; Fliers, Eric; Bisschop, Peter H; Meijer, Johanna H; Kalsbeek, Andries; Deboer, Tom

2016-10-20

Exposure to light at night (LAN) is associated with insomnia in humans. Light provides the main input to the master clock in the hypothalamic suprachiasmatic nucleus (SCN) that coordinates the sleep-wake cycle. We aimed to develop a rodent model for the effects of LAN on sleep. Therefore, we exposed male Wistar rats to either a 12 h light (150-200lux):12 h dark (LD) schedule or a 12 h light (150-200 lux):12 h dim white light (5 lux) (LDim) schedule. LDim acutely decreased the amplitude of daily rhythms of REM and NREM sleep, with a further decrease over the following days. LDim diminished the rhythms of 1) the circadian 16-19 Hz frequency domain within the NREM sleep EEG, and 2) SCN clock gene expression. LDim also induced internal desynchronization in locomotor activity by introducing a free running rhythm with a period of ~25 h next to the entrained 24 h rhythm. LDim did not affect body weight or glucose tolerance. In conclusion, we introduce the first rodent model for disturbed circadian control of sleep due to LAN. We show that internal desynchronization is possible in a 24 h L:D cycle which suggests that a similar desynchronization may explain the association between LAN and human insomnia.

Dim light at night disturbs the daily sleep-wake cycle in the rat

PubMed Central

Jan Stenvers, Dirk; van Dorp, Rick; Foppen, Ewout; Mendoza, Jorge; Opperhuizen, Anne-Loes; Fliers, Eric; Bisschop, Peter H.; Meijer, Johanna H.; Kalsbeek, Andries; Deboer, Tom

2016-01-01

Exposure to light at night (LAN) is associated with insomnia in humans. Light provides the main input to the master clock in the hypothalamic suprachiasmatic nucleus (SCN) that coordinates the sleep-wake cycle. We aimed to develop a rodent model for the effects of LAN on sleep. Therefore, we exposed male Wistar rats to either a 12 h light (150–200lux):12 h dark (LD) schedule or a 12 h light (150–200 lux):12 h dim white light (5 lux) (LDim) schedule. LDim acutely decreased the amplitude of daily rhythms of REM and NREM sleep, with a further decrease over the following days. LDim diminished the rhythms of 1) the circadian 16–19 Hz frequency domain within the NREM sleep EEG, and 2) SCN clock gene expression. LDim also induced internal desynchronization in locomotor activity by introducing a free running rhythm with a period of ~25 h next to the entrained 24 h rhythm. LDim did not affect body weight or glucose tolerance. In conclusion, we introduce the first rodent model for disturbed circadian control of sleep due to LAN. We show that internal desynchronization is possible in a 24 h L:D cycle which suggests that a similar desynchronization may explain the association between LAN and human insomnia. PMID:27762290

Anthropometric, physical function and general health markers of Masters athletes: a cross-sectional study

PubMed Central

Climstein, Mike; Quilter, Clodagh; Buckley, Georgina; Henwood, Timothy; Grigg, Josie; Keogh, Justin W.L.

2017-01-01

Once the general decline in muscle mass, muscle strength and physical performance falls below specific thresholds, the middle aged or older adult will be diagnosed as having sarcopenia (a loss of skeletal muscle mass and strength). Sarcopenia contributes to a range of adverse events in older age including disability, hospitalisation, institutionalisation and falls. One potentially relevant but understudied population for sarcopenia researchers would be Masters athletes. Masters sport is becoming more common as it allows athletes (typically 40 years and older) the opportunity to participate in individual and/or team sports against individuals of similar age. This study examined a variety of measures of anthropometric, physical function and general health markers in the male and female Masters athletes who competed at the 2014 Pan Pacific Masters Games held on the Gold Coast, Australia. Bioelectrical impedance analysis was used to collect body fat percentage, fat mass and fat-free mass; with body mass, height, body mass index (BMI) and sarcopenic status also recorded. Physical function was quantified by handgrip strength and habitual walking speed; with general health described by the number of chronic diseases and prescribed medications. Between group analyses utilised ANOVA and Tukey’s post-hoc tests to examine the effect of age group (40–49, 50–59, 60–69 and >70 years old) on the outcome measures for the entire sample as well as the male and female sub-groups. A total of 156 athletes (78 male, 78 female; mean 55.7 years) provided informed consent to participate in this study. These athletes possessed substantially better anthropometric, physical function and general health characteristics than the literature for their less physically active age-matched peers. No Masters athletes were categorised as being sarcopenic, although one participant had below normal physical performance and six participants had below normal muscle strength. In contrast, significant age-related reductions in handgrip strength and increases in the number of chronic diseases and prescribed medications were observed for the overall cohort as well as the male and female sub-groups. Nevertheless, even those aged over 70 years only averaged one chronic disease and one prescribed medication. These results may suggest that participation in Masters sport helps to maintain anthropometry, physical function and general health in middle-aged and older adults. However, it is also possible that only healthier middle-aged and older adults with favourable body composition and physical function may be able to participate in Masters sport. Future research should therefore utilise longitudinal research designs to determine the health and functional benefits of Master sports participation for middle-aged and older adults. PMID:28894644

Circadian rhythm and menopause.

PubMed

Pines, A

2016-12-01

Circadian rhythm is an internal biological clock which initiates and monitors various physiological processes with a fixed time-related schedule. The master circadian pacemaker is located in the suprachiasmatic nucleus in the hypothalamus. The circadian clock undergoes significant changes throughout the life span, at both the physiological and molecular levels. This cyclical physiological process, which is very complex and multifactorial, may be associated with metabolic alterations, atherosclerosis, impaired cognition, mood disturbances and even development of cancer. Sex differences do exist, and the well-known sleep disturbances associated with menopause are a good example. Circadian rhythm was detected in the daily pattern of hot flushes, with a peak in the afternoons. Endogenous secretion of melatonin decreases with aging across genders, and, among women, menopause is associated with a significant reduction of melatonin levels, affecting sleep. Although it might seem that hot flushes and melatonin secretion are likely related, there are not enough data to support such a hypothesis.

Space station definition and preliminary design, WP-01. Volume 2: Results

NASA Technical Reports Server (NTRS)

Lenda, J. A.

1987-01-01

The basis for the studies and analyses which led to the results and conclusions documented and summarized, was the Engineering Master Schedule (EMS) generated by NASA and used as the controlling set of milestones and associated activities required to produce in a timely manner those products needed by all program participants in the establishment of an approved program baseline. The EMS consisted of twenty themes grouped into categories covering requirements, configurations, and strategies. A number of studies and analyses that were coordinated with the MSFC program and technical personnel as being needed to provide the requisite back-up material to satify the EMS were identified. These studies and analyses provided the data sufficient to support the conclusions and recommendations given to the MSFC in response to their EMS activity and to support the system level and conceptual design level approaches developed and reflected in the detailed sections of this document.

Investigation of a reinforcement-based toilet training procedure for children with autism.

PubMed

Cicero, Frank R; Pfadt, Al

2002-01-01

Independent toileting is an important developmental skill which individuals with developmental disabilities often find a challenge to master. Effective toilet training interventions have been designed which rely on a combination of basic operant principles of positive reinforcement and punishment. In the present study, the effectiveness of a reinforcement-based toilet training intervention was investigated with three children with a diagnosis of autism. Procedures included a combination of positive reinforcement, graduated guidance, scheduled practice trials and forward prompting. Results indicated that all procedures were implemented in response to urination accidents. A three participants reduced urination accidents to zero and learned to spontaneously request use of the bathroom within 7-11 days of training. Gains were maintained over 6-month and 1-year follow-ups. Findings suggest that the proposed procedure is an effective and rapid method of toilet training, which can be implemented within a structured school setting with generalization to the home environment.

Quarterly Update: July-September 1990

DTIC Science & Technology

1990-09-01

drafted a report that defines the process and the products of a feature oriented domain analysis ( FODA ) and provides a sample do- main analysis . This...receive ............... training to offer assessment services commercially. This section provides NASA adopted the rate monotonic scheduling analysis ...that the rate monotonic scheduling analysis approach will be the JulySeptember 1990 baseline methodology for its hard real-time operating system

The Over-Scheduling Hypothesis Revisited: Intensity of Organized Activity Participation during Adolescence and Young Adult Outcomes

ERIC Educational Resources Information Center

Mahoney, Joseph L.; Vest, Andrea E.

2012-01-01

Concern exists that youth who spend a lot of time participating in organized out-of-school activities (e.g., sports) are at-risk for poor developmental outcomes. This concern--called the over-scheduling hypothesis--has primarily been assessed in terms of adolescent adjustment. This longitudinal study of a nationally representative sample of 1,115…

Design and Operation of Automated Ice-Tethered Profilers for Real-Time Seawater Observations in the Polar Oceans

DTIC Science & Technology

2006-06-01

of the system (up to 3 years depending on the profiling schedule ). Shortly after deployment, each ITP begins profiling the water column at its...was programmed with accelerated sampling schedules of multiple one-way traverses per day between 10 and 750-760 m depth in order to quickly evaluate endurance and component fatigue.

Color stability of shade guides after autoclave sterilization.

PubMed

Schmeling, Max; Sartori, Neimar; Monteiro, Sylvio; Baratieri, Luiz

2014-01-01

This study evaluated the influence of 120 autoclave sterilization cycles on the color stability of two commercial shade guides (Vita Classical and Vita System 3D-Master). The specimens were evaluated by spectrophotometer before and after the sterilization cycles. The color was described using the three-dimensional CIELab system. The statistical analysis was performed in three chromaticity coordinates, before and after sterilization cycles, using the paired samples t test. All specimens became darker after autoclave sterilization cycles. However, specimens of Vita Classical became redder, while those of the Vita System 3D-Master became more yellow. Repeated cycles of autoclave sterilization caused statistically significant changes in the color coordinates of the two shade guides. However, these differences are considered clinically acceptable.

Graduate Students as Academic Writers: Writing Anxiety, Self-Efficacy and Emotional Intelligence

ERIC Educational Resources Information Center

Huerta, Margarita; Goodson, Patricia; Beigi, Mina; Chlup, Dominique

2017-01-01

Researchers interested in psychological factors affecting writers in higher-education institutions, or academic writers, are concerned with internal variables affecting writing productivity; however few empirical studies explore these factors with samples of students who are in the process of earning master's or doctoral degrees (i.e., graduate…

Chlorine Analysis - Wastewater. Training Module 5.125.2.77.

ERIC Educational Resources Information Center

Kirkwood Community Coll., Cedar Rapids, IA.

This document is an instructional module package prepared in objective form for use by an instructor familiar with the laboratory procedures for determining the combined chlorine residual of a wastewater sample. Included are objectives, instructor guides, student handouts, and transparency masters. This module considers the amperometric, DPD,…

Measurement for Work. Teaching Guide and Sample Learning Activities.

ERIC Educational Resources Information Center

Angel, Margo; Bolton, Chris

This document is intended to help Australian technical and further education instructors in New South Wales (TAFE NSW) identify teaching principles and learning activities that they can use to help adult learners master the mathematics processes, knowledge, and skills needed to perform basic measurement tasks in today's workplace. The materials…

The Exploration of an Alternative to Acceptance Sampling

DTIC Science & Technology

1990-06-01

raiain6b Office Symbol -7i.Name of Monitoiing-Organizaton Naval Postgraduate School fif applicable) 30 iNaval Postgraduate School ~ (-c Address (cry...the degree of MASTER OF SCIENCE IN OPERATIONS RESEARCH from the NAVAL POSTGRADUATE SCHOOL June 1990 Author: C)Craig A. Hanunons Approved bF ,: W. M

A Planning Guide for Instructional Networks, Part I.

ERIC Educational Resources Information Center

Daly, Kevin F.

1994-01-01

Discusses three phases in implementing a master plan for a school-based local area network (LAN): (1) network software selection; (2) hardware selection, network topology, and site preparation; and (3) implementation time table. Sample planning and specification worksheets and a list of planning guides are included. (Contains six references.) (KRN)

Exploring the Relationships among Multicultural Training Experiences and Attitudes toward Diversity among Counseling Students

ERIC Educational Resources Information Center

Dickson, Ginger L.; Jepsen, David A.; Barbee, Phillip W.

2008-01-01

The authors surveyed a national sample of master's-level counseling students regarding their multicultural training experiences and their attitudes toward racial diversity and gender equity. Hierarchical regression models showed that student perceptions of program cultural ambience predicted positive cognitive attitudes toward racial diversity.…

9 CFR 113.209 - Rabies Vaccine, Killed Virus.

Code of Federal Regulations, 2010 CFR

2010-01-01

... immunogenicity of vaccine prepared with virus at the highest passage from the Master Seed shall be established in... the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov... observation period, the serial is unsatisfactory. (3) Potency test. Bulk or final container samples of...

Alkalinity Analysis. Training Module 5.220.2.77.

ERIC Educational Resources Information Center

Bonte, John L.; Davidson, Arnold C.

This document is an instructional module package prepared in objective form for use by an instructor familiar with the acid-base titrimetric procedure for determining the hydroxide, carbonate and bicarbonate alkalinity of a water sample. Included are objectives, an instructor guide, student handouts and transparency masters. A video tape is also…

30 CFR 250.1202 - Liquid hydrocarbon measurement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the API MPMS as incorporated by reference in 30 CFR 250.198, when obtaining net standard volume and... (retrograde) condensate volumes as allocated to the individual leases or units. (b) What are the requirements... displacement (pipe) prover, master meter, or tank prover; (iii) A proportional-to-flow sampling device pulsed...

30 CFR 250.1202 - Liquid hydrocarbon measurement.

Code of Federal Regulations, 2011 CFR

2011-07-01

... chapters of the API MPMS as incorporated by reference in 30 CFR 250.198, when obtaining net standard volume... pipeline (retrograde) condensate volumes as allocated to the individual leases or units. (b) What are the... displacement (pipe) prover, master meter, or tank prover; (iii) A proportional-to-flow sampling device pulsed...

Microcomputers in Education: A Self-Paced Orientation.

ERIC Educational Resources Information Center

Carey, Doris; Carey, Regan

Designed to serve as a self-paced computer course for education students with no experience using microcomputers, this manual contains instructions for operating an Apple IIe microcomputer, its introductory software, and Bank Street Writer, using the DOS 3.3 System Master. The lessons, which contain illustrations and sample screens, include…

Handbook for High School Chemistry Teachers.

ERIC Educational Resources Information Center

Bedenbaugh, John H., Ed.; Bedenbaugh, Angela O., Ed.

This handbook is based on a list of essential topics that should be mastered by the student who subsequently plans to pursue college chemistry. Chapters include: (1) "Introduction" (describing a position paper and the background of the handbook); (2) "Essential General Topics and Objectives"; (3) "Testing Students" (providing sample tests and…

Fecal Coliform Determinations. Training Module 5.115.3.77.

ERIC Educational Resources Information Center

Kirkwood Community Coll., Cedar Rapids, IA.

This document is an instructional module package prepared in objective form for use by an instructor familiar with multiple tube and membrane filter techniques for determining fecal coliform concentrations in a wastewater sample. Included are objectives, instructor guides, student handouts and transparency masters. This module considers proper…

Methods for Isolation, Purification, and Propagation of Bacteriophages of Campylobacter jejuni.

PubMed

Gencay, Yilmaz Emre; Birk, Tina; Sørensen, Martine Camilla Holst; Brøndsted, Lone

2017-01-01

Here, we describe the methods for isolation, purification, and propagation of Campylobacter jejuni bacteriophages from samples expected to contain high number of phages such as chicken feces. The overall steps are (1) liberation of phages from the sample material; (2) observation of plaque-forming units on C. jejuni lawns using a spot assay; (3) isolation of single plaques; (4) consecutive purification procedures; and (5) propagation of purified phages from a plate lysate to prepare master stocks.

Parts on Demand: Evaluation of Approaches to Achieve Flexible Manufacturing Systems for Navy Partson Demand. Volume 1

DTIC Science & Technology

1984-02-01

measurable impact if changed. The following items were included in the sample: * Mark Zero Items -Low demand insurance items which represent about three...R&D efforts reviewed. The resulting assessment highlighted the generic enabling technologies and cross- cutting R&D projects required to focus current...supplied by spot buys, and which may generate Navy Inventory Control Numbers (NICN). Random samples of data were extracted from the Master Data File ( MDF

CIDR

Science.gov Websites

Initiation Application Schedule Service Information and Pricing Services Sample Requirements Pricing SNP Genotyping General Information Genome Wide Association Custom FFPE Sample Options Methylation Linkage Consortium Developed Mouse Whole Genome Sequencing General Information Whole Genome Whole Exome Custom

Designing testing service at baristand industri Medan’s liquid waste laboratory

NASA Astrophysics Data System (ADS)

Kusumawaty, Dewi; Napitupulu, Humala L.; Sembiring, Meilita T.

2018-03-01

Baristand Industri Medan is a technical implementation unit under the Industrial and Research and Development Agency, the Ministry of Industry. One of the services often used in Baristand Industri Medan is liquid waste testing service. The company set the standard of service is nine working days for testing services. At 2015, 89.66% on testing services liquid waste does not meet the specified standard of services company because of many samples accumulated. The purpose of this research is designing online services to schedule the coming the liquid waste sample. The method used is designing an information system that consists of model design, output design, input design, database design and technology design. The results of designing information system of testing liquid waste online consist of three pages are pages to the customer, the recipient samples and laboratory. From the simulation results with scheduled samples, then the standard services a minimum of nine working days can be reached.

Optimizing Integrated Terminal Airspace Operations Under Uncertainty

NASA Technical Reports Server (NTRS)

Bosson, Christabelle; Xue, Min; Zelinski, Shannon

2014-01-01

In the terminal airspace, integrated departures and arrivals have the potential to increase operations efficiency. Recent research has developed geneticalgorithm- based schedulers for integrated arrival and departure operations under uncertainty. This paper presents an alternate method using a machine jobshop scheduling formulation to model the integrated airspace operations. A multistage stochastic programming approach is chosen to formulate the problem and candidate solutions are obtained by solving sample average approximation problems with finite sample size. Because approximate solutions are computed, the proposed algorithm incorporates the computation of statistical bounds to estimate the optimality of the candidate solutions. A proof-ofconcept study is conducted on a baseline implementation of a simple problem considering a fleet mix of 14 aircraft evolving in a model of the Los Angeles terminal airspace. A more thorough statistical analysis is also performed to evaluate the impact of the number of scenarios considered in the sampled problem. To handle extensive sampling computations, a multithreading technique is introduced.

A survey of the relationship between work schedule and its effect on the fatigue of rescue personnel in Isfahan with a standard method of CIS202

PubMed Central

Habibi, Ehsanollah; Soury, Shiva; Vardanjani, Hassan Rajabi; Khodarahmi, Behnam; Dehghan, Habibollah; Hosseini, Mohsen; Esmaeli, Hamid; Khademi, Abolfazl

2015-01-01

Context: Fatigue is a factor that can have negative effects on family life, social relationship and work. Work schedule is one of the affective factors on personnel's fatigue in different jobs. In this study, the work schedule and its effect on rescue personnel in Isfahan are explored. Aims: The purpose of this study was to investigate the relationship between work schedules and fatigue among rescue personnel. Settings and Design: This study is periodical and has been conducted on 72 employees of rescue personnel in Isfahan. Materials and Methods: Random sampling was done and the primary data that was collected through fatigue assessment questionnaire after being conducted as a pilot study on 10% of samples were collected to confirm the validity of this study. Finally, the data was given to SPSS11.5 software and were analyzed by descriptive statistics and linear digression. Results: The results showed that from the statistical point of view some parts of work schedules like work hours satisfaction, resting time and work order on total fatigue are effective in linear and inverse way but the item “predictibility of work conditions” does not have a meaningful relationship with total fatigue. Furthermore, the results showed that there is a meaningful and inverse relationship with work hours, resting time and work order with mental fatigue and also the work schedule has a meaningful, linear and inverse relation with mental fatigue and total fatigue. Conclusions: By increasing the satisfaction of working hours, increasing resting time and also with an increase of work order the total fatigue of rescue personnel will decrease. PMID:27462640

Designing an optimal software intensive system acquisition: A game theoretic approach

NASA Astrophysics Data System (ADS)

Buettner, Douglas John

The development of schedule-constrained software-intensive space systems is challenging. Case study data from national security space programs developed at the U.S. Air Force Space and Missile Systems Center (USAF SMC) provide evidence of the strong desire by contractors to skip or severely reduce software development design and early defect detection methods in these schedule-constrained environments. The research findings suggest recommendations to fully address these issues at numerous levels. However, the observations lead us to investigate modeling and theoretical methods to fundamentally understand what motivated this behavior in the first place. As a result, Madachy's inspection-based system dynamics model is modified to include unit testing and an integration test feedback loop. This Modified Madachy Model (MMM) is used as a tool to investigate the consequences of this behavior on the observed defect dynamics for two remarkably different case study software projects. Latin Hypercube sampling of the MMM with sample distributions for quality, schedule and cost-driven strategies demonstrate that the higher cost and effort quality-driven strategies provide consistently better schedule performance than the schedule-driven up-front effort-reduction strategies. Game theory reasoning for schedule-driven engineers cutting corners on inspections and unit testing is based on the case study evidence and Austin's agency model to describe the observed phenomena. Game theory concepts are then used to argue that the source of the problem and hence the solution to developers cutting corners on quality for schedule-driven system acquisitions ultimately lies with the government. The game theory arguments also lead to the suggestion that the use of a multi-player dynamic Nash bargaining game provides a solution for our observed lack of quality game between the government (the acquirer) and "large-corporation" software developers. A note is provided that argues this multi-player dynamic Nash bargaining game also provides the solution to Freeman Dyson's problem, for a way to place a label of good or bad on systems.

Task 2 Report: Algorithm Development and Performance Analysis

DTIC Science & Technology

1993-07-01

separated peaks ............................................. 39 7-16 Example ILGC data for schedule 3 phosphites showing an analysis method which integrates...more closely follows the baseline ................. 40 7-18 Example R.GC data for schedule 3 phosphites showing an analysis method resulting in unwanted...much of the ambiguity that can arise in GC/MS with trace environmental samples, for example. Correlated chromatography, on the other hand, separates the

The Autism Diagnostic Observation Schedule, Module 4: Application of the Revised Algorithms in an Independent, Well-Defined, Dutch Sample (N = 93)

ERIC Educational Resources Information Center

de Bildt, Annelies; Sytema, Sjoerd; Meffert, Harma; Bastiaansen, Jojanneke A. C. J.

2016-01-01

This study examined the discriminative ability of the revised Autism Diagnostic Observation Schedule module 4 algorithm (Hus and Lord in "J Autism Dev Disord" 44(8):1996-2012, 2014) in 93 Dutch males with Autism Spectrum Disorder (ASD), schizophrenia, psychopathy or controls. Discriminative ability of the revised algorithm ASD cut-off…

78 FR 49296 - Centennial Challenges 2014 Sample Return Robot Challenge

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-13

... Return Robot Challenge AGENCY: National Aeronautics and Space Administration (NASA). ACTION: Notice of Centennial Challenges 2014 Sample Return Robot Challenge. SUMMARY: This notice is issued in accordance with 51 U.S.C. 20144(c). The 2014 Sample Return Robot Challenge is scheduled and teams that wish to...

Optimal updating magnitude in adaptive flat-distribution sampling

NASA Astrophysics Data System (ADS)

Zhang, Cheng; Drake, Justin A.; Ma, Jianpeng; Pettitt, B. Montgomery

2017-11-01

We present a study on the optimization of the updating magnitude for a class of free energy methods based on flat-distribution sampling, including the Wang-Landau (WL) algorithm and metadynamics. These methods rely on adaptive construction of a bias potential that offsets the potential of mean force by histogram-based updates. The convergence of the bias potential can be improved by decreasing the updating magnitude with an optimal schedule. We show that while the asymptotically optimal schedule for the single-bin updating scheme (commonly used in the WL algorithm) is given by the known inverse-time formula, that for the Gaussian updating scheme (commonly used in metadynamics) is often more complex. We further show that the single-bin updating scheme is optimal for very long simulations, and it can be generalized to a class of bandpass updating schemes that are similarly optimal. These bandpass updating schemes target only a few long-range distribution modes and their optimal schedule is also given by the inverse-time formula. Constructed from orthogonal polynomials, the bandpass updating schemes generalize the WL and Langfeld-Lucini-Rago algorithms as an automatic parameter tuning scheme for umbrella sampling.

Optimal updating magnitude in adaptive flat-distribution sampling.

PubMed

Zhang, Cheng; Drake, Justin A; Ma, Jianpeng; Pettitt, B Montgomery

2017-11-07

We present a study on the optimization of the updating magnitude for a class of free energy methods based on flat-distribution sampling, including the Wang-Landau (WL) algorithm and metadynamics. These methods rely on adaptive construction of a bias potential that offsets the potential of mean force by histogram-based updates. The convergence of the bias potential can be improved by decreasing the updating magnitude with an optimal schedule. We show that while the asymptotically optimal schedule for the single-bin updating scheme (commonly used in the WL algorithm) is given by the known inverse-time formula, that for the Gaussian updating scheme (commonly used in metadynamics) is often more complex. We further show that the single-bin updating scheme is optimal for very long simulations, and it can be generalized to a class of bandpass updating schemes that are similarly optimal. These bandpass updating schemes target only a few long-range distribution modes and their optimal schedule is also given by the inverse-time formula. Constructed from orthogonal polynomials, the bandpass updating schemes generalize the WL and Langfeld-Lucini-Rago algorithms as an automatic parameter tuning scheme for umbrella sampling.

Cross-Layer Adaptive Feedback Scheduling of Wireless Control Systems

PubMed Central

Xia, Feng; Ma, Longhua; Peng, Chen; Sun, Youxian; Dong, Jinxiang

2008-01-01

There is a trend towards using wireless technologies in networked control systems. However, the adverse properties of the radio channels make it difficult to design and implement control systems in wireless environments. To attack the uncertainty in available communication resources in wireless control systems closed over WLAN, a cross-layer adaptive feedback scheduling (CLAFS) scheme is developed, which takes advantage of the co-design of control and wireless communications. By exploiting cross-layer design, CLAFS adjusts the sampling periods of control systems at the application layer based on information about deadline miss ratio and transmission rate from the physical layer. Within the framework of feedback scheduling, the control performance is maximized through controlling the deadline miss ratio. Key design parameters of the feedback scheduler are adapted to dynamic changes in the channel condition. An event-driven invocation mechanism for the feedback scheduler is also developed. Simulation results show that the proposed approach is efficient in dealing with channel capacity variations and noise interference, thus providing an enabling technology for control over WLAN. PMID:27879934

Effect of customization of master gutta-percha cone on apical control of root filling using different techniques: an ex vivo study.

PubMed

van Zyl, S P; Gulabivala, K; Ng, Y-L

2005-09-01

(i) To compare the prevalence of extrusion of root filling material when placed using different root filling techniques, with or without customization of the master gutta-percha (GP) cone; and (ii) to investigate the effects of some factors influencing root filling extrusion and presence of voids. A total of 180 roots were selected, prepared and randomly allocated to three groups. Five general dental practitioners performed the root fillings; each filled one group of roots (n = 60) using each of three techniques; 'cold lateral compaction' (n = 20), 'warm vertical compaction' (n = 20) and 'continuous-wave' (n = 20) techniques. For each obturation technique, the master GP cone was customized using chloroform in 10 samples. Two groups of the roots were recycled to allow all five operators to fulfill their remit. Two observers, blind to operator and obturation technique, examined the radiographs (master apical file, post-obturation) to determine the presence of root filling extrusion and voids within the apical 5 mm, independently. Root filling extrusion was also confirmed by direct inspection of the root apex after obturation. The data were analysed using logistic regression models. A total of 300 root fillings were performed; nine were excluded from the analysis. Most of the root fillings (80%, n = 233) were placed within 0.5 mm of the working length; only 20% (n = 58) were placed >0.5 mm beyond the working length. The odds of prevalence of extrusion (>0.5 mm) were significantly reduced by about 50% when cold lateral compaction or customization of GP were used. One operator produced 2.5 times more extruded root fillings than others. Curvature & length of root canal, apical size of prepared canal, as well as operator's preferred obturation technique had no significant influence on the prevalence of extrusion. Customization of GP was the sole factor to significantly reduce the prevalence of voids within the apical 5 mm of working length. Root filling extrusion was significantly influenced by 'operator' and was reduced by cold lateral compaction and customization of the master cone. Customization of master cone was the only factor that reduced voids apically.

Study on Instructional Paradigms of Virtual Education in Pakistan: A Learners' Perspective

ERIC Educational Resources Information Center

Hussain, Irshad

2012-01-01

The present study is aimed at examining instructional paradigms of virtual education in Pakistan. The population of the study consisted of learners from Master of Business Administration (MBA) Program at Virtual University (VU) of Pakistan. The researcher adopted convenient sampling technique and collected data from 600 learners through five-point…

Fostering Resilience in Beginning Special Education Teachers

ERIC Educational Resources Information Center

Belknap, Bridget M.

2012-01-01

This qualitative study identified perceptions of risk and resilience in four different teaching roles of first-year, secondary special education teachers in three school districts in a large metropolitan area. The study sample consisted of nine women in their first year of teaching who were also completing the requirements of a master's…

Experiences with Counselor Training in Central Europe: Voices from Student Trainees

ERIC Educational Resources Information Center

Jacob, Charles; Roth, Gregory; Flanders, Jessica; Jackson, Cheria; Park-Davidson, Caitlin; Grubrova, Tereza; Guynn, Jacqueline; Shoemaker, Rebecca; Goldberg, Rachael; Chehayl, Casy

2017-01-01

Globalization has led to an increase in United States-influenced counseling programs the world over; however, the extent to which these training models apply to other cultures is unclear. Using a sample of master's-level counseling students studying in the Czech Republic (n = 5), the authors conducted a phenomenological inquiry examining the…

Occupational Opportunities in Nebraska: 1974 Report.

ERIC Educational Resources Information Center

Nebraska Occupational Needs Research Coordinating Unit, Lincoln.

The seventh annual study of occupational opportunities in Nebraska reflects State manpower needs and trends as revealed by employer listings (number of persons employed, job duties of persons employed, and a projection of future needs). A 5 percent random sample was generated from the revised master list of employers for each of the six State…

Student Subsidy of the Internationalised Curriculum: Knowing, Voicing and Producing the Other

ERIC Educational Resources Information Center

Doherty, Catherine

2008-01-01

This paper explores cultural production in online internationalised education. The analysis samples interactions in a Masters of Business Administration (MBA) unit offered online by an Australian university to a student group including enrolments through a Malaysian institution. Part of the curricular content was a consideration of how different…

Public Service Motivation and Socialization in Graduate Education

ERIC Educational Resources Information Center

Bright, Leonard

2016-01-01

The purpose of this study is to explore the extent to which the characteristics of public administration degree programs are related to public service motivation (PSM) using a higher education socialization framework. Using a sample of approximately 500 students enrolled in 26 Master's degree programs across the country, this study confirms that…

The Foster Care Project: Findings on Cognitive and Social-Emotional Development.

ERIC Educational Resources Information Center

McIntyre, Anne; Lounsbury, Karen Rasmussen

Findings of a study of a nonclinical sample of 30 kindergarten children and elementary school students in foster care suggest that few had mastered many of the fundamental psychosocial tasks of childhood. Primary measures were obtained by administering the Task of Emotional Development test (TED) -- a picture projective test designed to index…

Culminating Experience Empirical and Theoretical Research Projects, University of Tennessee at Chattanooga, Spring, 2005

ERIC Educational Resources Information Center

Watson, Sandy White, Ed.

2005-01-01

This document represents a sample collection of master's theses from the University of Tennessee at Chattanooga's Teacher Education Program, spring semester, 2005. The majority of these student researchers were simultaneously student teaching while writing their theses. Studies were empirical and conceptual in nature and demonstrate some ways in…

A Computer-Based Program to Teach Braille Reading to Sighted Individuals

ERIC Educational Resources Information Center

Scheithauer, Mindy C.; Tiger, Jeffrey H.

2012-01-01

Instructors of the visually impaired need efficient braille-training methods. This study conducted a preliminary evaluation of a computer-based program intended to teach the relation between braille characters and English letters using a matching-to-sample format with 4 sighted college students. Each participant mastered matching visual depictions…

The Value of a Master's Degree to Recreation Professionals

ERIC Educational Resources Information Center

Hodge, Camilla J.; Hill, Brian J.; Brinton, Christian

2012-01-01

This study assessed the nature of the relationship between earning advanced degrees and career outcomes such as salary, job satisfaction, social capital, and human capital among professionals in the parks and recreation field. The sample (n = 196) was drawn from parks and recreation agencies located in the United States. Agencies, excluding…

Manganese Analysis in Water Samples. Training Module 5.211.2.77.

ERIC Educational Resources Information Center

Bonte, John L.; Davidson, Arnold C.

This document is an instructional module package prepared in objective form for use by an instructor familiar with the spectrophotometric analysis of manganese in water using the persulfate method. Included are objectives, an instructor guide, student handouts, and transparency masters. A video tape is also available from the author. This module…

Professional Teacher Learning in Virtual Environments

ERIC Educational Resources Information Center

Pachler, Norbert; Daly, Caroline

2006-01-01

This article is based on qualitative empirical research into the ways in which teachers view their experiences as learners in the context of an online tutor group who are studying for the mixed-mode Master of Teaching degree at the Institute of Education, University of London. Data collected from a stratified sample of teacher participants is…

To Master or Perform? Exploring Relations between Achievement Goals and Conceptual Change Learning

ERIC Educational Resources Information Center

Ranellucci, John; Muis, Krista R.; Duffy, Melissa; Wang, Xihui; Sampasivam, Lavanya; Franco, Gina M.

2013-01-01

Background: Research is needed to explore conceptual change in relation to achievement goal orientations and depth of processing. Aims: To address this need, we examined relations between achievement goals, use of deep versus shallow processing strategies, and conceptual change learning using a think-aloud protocol. Sample and Method:…

Developing a technique to master multiplication facts 6 to 9 for year 5 pupils

NASA Astrophysics Data System (ADS)

Ahmat, Norhayati; Mohamed, Nurul Huda; Azmee, Nor Afzalina; Adham, Sarah Mohd

2017-05-01

This study was performed to enhance the mastery of multiplication facts 6 to 9 amongst the year 5 pupils. The samples of this study were 40 pupils of year 5 from one of primary school at Teluk Intan, Perak. The samples were divided into two groups, the control group and the treatment group where each group consists of 20 pupils respectively. In this study, new multiplication facts technique, known as `Teknik Sifir Jari' has been introduced to the treatment group. The objectives of the study are to test the effectiveness of the new technique and to increase multiplication fact fluency among pupils. The instruments that have been used in this study are the achievement tests (pre-test and post-test). The data obtained were collected and analyzed using SPSS version 21.A t-test had also been carried out to test the null hypothesis. The results showed that there was an increment in the students' achievement for the students who were taught using the `Teknik Sifir Jari'. Therefore, the `Teknik Sifir Jari' has proved its effectiveness to support students in mastering multiplication facts.

Point of purchase cigarette promotions before and after the Master Settlement Agreement: exploring retail scanner data.

PubMed

Loomis, B R; Farrelly, M C; Nonnemaker, J M; Mann, N H

2006-04-01

Evidence indicates that point of purchase (POP) advertising and promotions for cigarettes have increased since the Master Settlement Agreement (MSA). Retail promotions have the potential to offset the effects of cigarette tax and price increases and tobacco control programmes. To describe the trend in the proportion of cigarette sales that occur as part of a POP promotion before and after the MSA. Scanner data were analysed on cigarette sales from a national sample of grocery stores, reported quarterly from 1994 through 2003. The proportion of total cigarette sales that occurred under any of three different types of POP promotions is presented. The proportion of cigarettes sold under a POP promotion increased notably over the sample period. Large increases in promoted sales are observed following implementation of the MSA and during periods of sustained cigarette excise tax increases. The observed pattern of promoted cigarette sales is suggestive of a positive relationship between retail cigarette promotions, the MSA, and state cigarette tax increases. More research is needed to describe fully the relationship between cigarette promotions and tobacco control policy.

Root Canal Cleaning Efficacy of Rotary and Hand Files Instrumentation in Primary Molars

PubMed Central

Nazari Moghaddam, Kiumars; Mehran, Majid; Farajian Zadeh, Hamideh

2009-01-01

INTRODUCTION: Pulpectomy of primary teeth is commonly carried out with hand files and broaches; a tricky and time consuming procedure. The purpose of this in vitro study was to compare the cleaning efficacy and time taken for instrumentation of deciduous molars using hand K-files and Flex Master rotary system. MATERIALS AND METHODS: In this study, 68 canals of 23 extracted primary molars with at least two third intact roots and 7-12 mm length were selected. After preparing an access cavity, K-file size #15 was introduced into the root canal and India ink was injected with an insulin syringe. Sixty samples were randomly divided in to experimental groups in group I (n=30), root canals were prepared with hand K-files; in group II (n=30), rotary Flex Master files were used for instrumentation, and in group III 8 remained samples were considered as negative controls. After clearing and root sectioning, the removal of India ink from cervical, middle, and apical thirds was scored. Data was analyzed using student's T-test and Mann-Whitney U test. RESULTS: There was no significant difference between experimental groups cleaning efficacy at the cervical, middle and apical root canal thirds. Only the coronal third scored higher in the hand instrumented group (P<0.001). Instrumentation with Flex Master rotary files was significantly less time consuming (P<0.001). CONCLUSION: Although there was no difference in cleanliness efficacy at the apical and middle thirds, the coronal third was more effectively cleaned with hand files. Predictably, time efficiency was a significant advantage with rotary technique. PMID:23940486

[Methodological Aspects of the Sampling Design for the 2015 National Mental Health Survey].

PubMed

Rodríguez, Nelcy; Rodríguez, Viviana Alejandra; Ramírez, Eugenia; Cediel, Sandra; Gil, Fabián; Rondón, Martín Alonso

2016-12-01

The WHO has encouraged the development, implementation and evaluation of policies related to mental health all over the world. In Colombia, within this framework and promoted by the Ministry of Health and Social Protection, as well as being supported by Colciencias, the fourth National Mental Health Survey (NMHST) was conducted using a observational cross sectional study. According to the context and following the guidelines and sampling design, a summary of the methodology used for this sampling process is presented. The fourth NMHST used the Homes Master Sample for Studies in Health from the National System of Studies and Population Surveys for Health to calculate its sample. This Master Sample was developed and implemented in the year 2013 by the Ministry of Social Protection. This study included non-institutionalised civilian population divided into four age groups: children 7-11 years, adolescent 12-17 years, 18-44 years and 44 years old or older. The sample size calculation was based on the reported prevalences in other studies for the outcomes of mental disorders, depression, suicide, associated morbidity, and alcohol use. A probabilistic, cluster, stratified and multistage selection process was used. Expansions factors to the total population were calculated. A total of 15,351 completed surveys were collected and were distributed according to the age groups: 2727, 7-11 years, 1754, 12-17 years, 5889, 18-44 years, and 4981, ≥45 years. All the surveys were distributed in five regions: Atlantic, Oriental, Bogotá, Central and Pacific. A sufficient number of surveys were collected in this study to obtain a more precise approximation of the mental problems and disorders at the regional and national level. Copyright © 2016 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

Selection bias in population-based cancer case-control studies due to incomplete sampling frame coverage.

PubMed

Walsh, Matthew C; Trentham-Dietz, Amy; Gangnon, Ronald E; Nieto, F Javier; Newcomb, Polly A; Palta, Mari

2012-06-01

Increasing numbers of individuals are choosing to opt out of population-based sampling frames due to privacy concerns. This is especially a problem in the selection of controls for case-control studies, as the cases often arise from relatively complete population-based registries, whereas control selection requires a sampling frame. If opt out is also related to risk factors, bias can arise. We linked breast cancer cases who reported having a valid driver's license from the 2004-2008 Wisconsin women's health study (N = 2,988) with a master list of licensed drivers from the Wisconsin Department of Transportation (WDOT). This master list excludes Wisconsin drivers that requested their information not be sold by the state. Multivariate-adjusted selection probability ratios (SPR) were calculated to estimate potential bias when using this driver's license sampling frame to select controls. A total of 962 cases (32%) had opted out of the WDOT sampling frame. Cases age <40 (SPR = 0.90), income either unreported (SPR = 0.89) or greater than $50,000 (SPR = 0.94), lower parity (SPR = 0.96 per one-child decrease), and hormone use (SPR = 0.93) were significantly less likely to be covered by the WDOT sampling frame (α = 0.05 level). Our results indicate the potential for selection bias due to differential opt out between various demographic and behavioral subgroups of controls. As selection bias may differ by exposure and study base, the assessment of potential bias needs to be ongoing. SPRs can be used to predict the direction of bias when cases and controls stem from different sampling frames in population-based case-control studies.

Statistical Analyses for Probabilistic Assessments of the Reactor Pressure Vessel Structural Integrity: Building a Master Curve on an Extract of the 'Euro' Fracture Toughness Dataset, Controlling Statistical Uncertainty for Both Mono-Temperature and multi-temperature tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

Josse, Florent; Lefebvre, Yannick; Todeschini, Patrick

2006-07-01

Assessing the structural integrity of a nuclear Reactor Pressure Vessel (RPV) subjected to pressurized-thermal-shock (PTS) transients is extremely important to safety. In addition to conventional deterministic calculations to confirm RPV integrity, Electricite de France (EDF) carries out probabilistic analyses. Probabilistic analyses are interesting because some key variables, albeit conventionally taken at conservative values, can be modeled more accurately through statistical variability. One variable which significantly affects RPV structural integrity assessment is cleavage fracture initiation toughness. The reference fracture toughness method currently in use at EDF is the RCCM and ASME Code lower-bound K{sub IC} based on the indexing parameter RT{submore » NDT}. However, in order to quantify the toughness scatter for probabilistic analyses, the master curve method is being analyzed at present. Furthermore, the master curve method is a direct means of evaluating fracture toughness based on K{sub JC} data. In the framework of the master curve investigation undertaken by EDF, this article deals with the following two statistical items: building a master curve from an extract of a fracture toughness dataset (from the European project 'Unified Reference Fracture Toughness Design curves for RPV Steels') and controlling statistical uncertainty for both mono-temperature and multi-temperature tests. Concerning the first point, master curve temperature dependence is empirical in nature. To determine the 'original' master curve, Wallin postulated that a unified description of fracture toughness temperature dependence for ferritic steels is possible, and used a large number of data corresponding to nuclear-grade pressure vessel steels and welds. Our working hypothesis is that some ferritic steels may behave in slightly different ways. Therefore we focused exclusively on the basic french reactor vessel metal of types A508 Class 3 and A 533 grade B Class 1, taking the sampling level and direction into account as well as the test specimen type. As for the second point, the emphasis is placed on the uncertainties in applying the master curve approach. For a toughness dataset based on different specimens of a single product, application of the master curve methodology requires the statistical estimation of one parameter: the reference temperature T{sub 0}. Because of the limited number of specimens, estimation of this temperature is uncertain. The ASTM standard provides a rough evaluation of this statistical uncertainty through an approximate confidence interval. In this paper, a thorough study is carried out to build more meaningful confidence intervals (for both mono-temperature and multi-temperature tests). These results ensure better control over uncertainty, and allow rigorous analysis of the impact of its influencing factors: the number of specimens and the temperatures at which they have been tested. (authors)« less

Master environmental plan for Fort Devens, Massachusetts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biang, C.A.; Peters, R.W.; Pearl, R.H.

Argonne National Laboratory has prepared a master environmental plan (MEP) for Fort Devens, Massachusetts, for the US Army Toxic and Hazardous Materials Agency. The MEP is an assessment based on environmental laws and regulations of both the federal government and the Commonwealth of Massachusetts. The MEP assess the physical and environmental status of 58 potential hazardous waste sites, including 54 study areas (SAs) that pose a potential for releasing contamination into the environment and 4 areas of concern (AOCs) that are known to have substantial contamination. For each SA or AOC, this MEP describes the known history and environment, identifiesmore » additional data needs, and proposes possible response actions. Most recommended response actions consist of environmental sampling and monitoring and other characterization studies. 74 refs., 63 figs., 50 tabs.« less

Least Squares Solution of Small Sample Multiple-Master PSInSAR System

NASA Astrophysics Data System (ADS)

Zhang, Lei; Ding, Xiao Li; Lu, Zhong

2010-03-01

In this paper we propose a least squares based approach for multi-temporal SAR interferometry that allows to estimate the deformation rate with no need of phase unwrapping. The approach utilizes a series of multi-master wrapped differential interferograms with short baselines and only focuses on the arcs constructed by two nearby points at which there are no phase ambiguities. During the estimation an outlier detector is used to identify and remove the arcs with phase ambiguities, and pseudoinverse of priori variance component matrix is taken as the weight of correlated observations in the model. The parameters at points can be obtained by an indirect adjustment model with constraints when several reference points are available. The proposed approach is verified by a set of simulated data.

Variations in Sleep and Performance by Duty Start Time in Short Haul Operations

NASA Technical Reports Server (NTRS)

Flynn-Evans, Erin

2016-01-01

Prior studies have confirmed that commercial airline pilots experience circadian phase shifts and short sleep duration following travel with layovers in different time zones. Few studies have examined the impact of early and late starts on the sleep and circadian phase of airline pilots who return to their domicile after each duty period. We recruited 44 pilots (4 female) from a short-haul commercial airline to participate in a study examining sleep and circadian phase over four duty schedules (baseline, early starts, mid-day starts, late starts). Each duty schedule was five days long, separated by three rest days. Participants completed the rosters in the same order. Sleep outcomes were estimated using wrist-borne actigraphy (Actiware Software, Respironics, Bend, OR) and daily sleep diaries. Thirteen participants volunteered to collect urine samples for the assessment of 6-sulfatoxymelatonin (aMT6s). Urine samples were collected in four-hourly bins during the day and eight-hourly bins during sleep episodes, for 24 hours immediately following each experimental duty schedule. The aMT6s results were fit to a cosine in order to obtain the acrophase to estimate circadian phase. Univariate statistics were calculated for acrophase changes, schedule start times and sleep times. All statistical analyses were computed using SAS software (Cary, IN).

Porting Gravitational Wave Signal Extraction to Parallel Virtual Machine (PVM)

NASA Technical Reports Server (NTRS)

Thirumalainambi, Rajkumar; Thompson, David E.; Redmon, Jeffery

2009-01-01

Laser Interferometer Space Antenna (LISA) is a planned NASA-ESA mission to be launched around 2012. The Gravitational Wave detection is fundamentally the determination of frequency, source parameters, and waveform amplitude derived in a specific order from the interferometric time-series of the rotating LISA spacecrafts. The LISA Science Team has developed a Mock LISA Data Challenge intended to promote the testing of complicated nested search algorithms to detect the 100-1 millihertz frequency signals at amplitudes of 10E-21. However, it has become clear that, sequential search of the parameters is very time consuming and ultra-sensitive; hence, a new strategy has been developed. Parallelization of existing sequential search algorithms of Gravitational Wave signal identification consists of decomposing sequential search loops, beginning with outermost loops and working inward. In this process, the main challenge is to detect interdependencies among loops and partitioning the loops so as to preserve concurrency. Existing parallel programs are based upon either shared memory or distributed memory paradigms. In PVM, master and node programs are used to execute parallelization and process spawning. The PVM can handle process management and process addressing schemes using a virtual machine configuration. The task scheduling and the messaging and signaling can be implemented efficiently for the LISA Gravitational Wave search process using a master and 6 nodes. This approach is accomplished using a server that is available at NASA Ames Research Center, and has been dedicated to the LISA Data Challenge Competition. Historically, gravitational wave and source identification parameters have taken around 7 days in this dedicated single thread Linux based server. Using PVM approach, the parameter extraction problem can be reduced to within a day. The low frequency computation and a proxy signal-to-noise ratio are calculated in separate nodes that are controlled by the master using message and vector of data passing. The message passing among nodes follows a pattern of synchronous and asynchronous send-and-receive protocols. The communication model and the message buffers are allocated dynamically to address rapid search of gravitational wave source information in the Mock LISA data sets.

STATISTICAL DISTRIBUTIONS OF PARTICULATE MATTER AND THE ERROR ASSOCIATED WITH SAMPLING FREQUENCY. (R828678C010)

EPA Science Inventory

The distribution of particulate matter (PM) concentrations has an impact on human health effects and the setting of PM regulations. Since PM is commonly sampled on less than daily schedules, the magnitude of sampling errors needs to be determined. Daily PM data from Spokane, W...

Perceived adherence to prescribed or recommended standards of care among adults with diabetes.

PubMed

Jorgensen, Wendy A; Polivka, Barbara J; Lennie, Terry A

2002-01-01

Adults with diabetes were surveyed to determine the extent to which respondents perceived specific preventive regimens (diet, exercise, weight control, and education) had been prescribed or recommended, adhered to their prescribed regimens, and identified barriers to nonadherence. Surveys were mailed to 2 samples of adults diagnosed with diabetes. The clinic sample was from health department clinics (n = 264); the agency sample was from a nonprofit agency serving people with diabetes (n = 111). Of the 4 preventive measures under investigation, diet plans and weight reduction were perceived as most commonly recommended by health professionals; exercise schedules were the least commonly recommended. Diabetes self-management education was reportedly recommended more often among the agency sample. In terms of adherence, approximately half of both samples were able to lose weight. A smaller portion of the clinic sample was able to get needed foods and exercise, and maintain weight loss. The most frequently cited reasons for nonadherence were cost, transportation, and other health conditions. Improvement in the implementation of preventive behaviors is needed, particularly exercise schedules. Barriers to care, such as costs and transportation, may need special consideration.

[Teaching nursing research at bachelor and second level degree: opinions of nursing associate professors and nursing researchers].

PubMed

D'Aliesio, Lorella; Vellone, Ercole; Rega, Maria Luisa; Galletti, Caterina

2006-01-01

Nursing research is a systematic and very important enquiry for improving clients' quality of life and effective and efficient nursing care. National and international literature state that all nurses should have knowledge and responsibilities in research which are different in relation to their educational level. The aim of the present study was to collect opinions of the new professors in nursing about objectives, contents and methods for teaching nursing research at Bachelor and Master Degree. The sample was made of nine participants who were interviewed by twenty questions sent by e-mail. The interviews were analysed using quantitative-descriptive and qualitative-phenomenological methods (triangulation). Interviews revealed that Bachelor students should be educated to retrieve and criticise scientific literature, to apply research finding in practice and to collaborate in research studies; Master students should improve knowledge of Bachelor degree and be able to design and conduct research studies. Participants emphasised the importance of using active methodologies for teaching and to involve students in research. By analysing the literature and the results of the present study educational objectives for teaching nursing research at Bachelor and Master degree are defined.

Improving secondary prevention screening in clinical encounters using mhealth among prelicensure master's entry clinical nursing students.

PubMed

FitzGerald, Leah Z; Rorie, Anne; Salem, Benissa E

2015-04-01

To determine the feasibility and acceptability of a mHealth application among nursing students for health promotion and secondary prevention health recommendations for hospitalized adult patients. A pretest-posttest design with a convenience sample of 169 prelicensure master's entry clinical nursing students in a large urban public university. Survey questions assessed intention to use, perceived usefulness, perceived ease of use, subjective norm, voluntariness, clinical area relevance, output quality, and result demonstrability of the United States Preventive Services Task Force (USPSTF) evidence-based practice guidelines via the mHealth application. Descriptive statistics and frequencies were used to explore sociodemographics; paired t-tests were used to evaluate pre- and posttest differences. Pre- and posttest significant differences (p < .01) were found between intention to use, perceived usefulness, subjective norm, voluntariness, image, clinical relevance, result demonstrability, and output quality (p < .02). Ease use of a mHealth application was not significantly different. These findings highlight the need to integrate evidence-based practice tools using mHealth technology among prelicensure master's entry clinical nursing students in order to engage and foster translational learning and improve dissemination of secondary prevention screening guidelines among hospitalized patients. © 2015 Sigma Theta Tau International.

Ten Years and 1 Master Settlement Agreement Later: The Nature and Frequency of Alcohol and Tobacco Promotion in Televised Sports, 2000 Through 2002

PubMed Central

Zwarun, Lara

2006-01-01

Objectives. I sought to identify what kinds of promotion for alcohol and tobacco products are found in televised sports programming, as well as how frequently they occur. I compared my findings with data from 5 and 10 years earlier to examine the effects of the Master Settlement Agreement and detect industry trends. Method. A content analysis of more than 83 hours of televised sports programming from 2000 through 2002 was conducted. Composite week sampling was used to ensure results were representative of the overall population of television sports programs. Programs were examined for traditional advertising (commercials) and nontraditional advertising (stadium signs, announcer voiceovers, etc.). Results. Rates of certain types of alcohol advertising have decreased, but what remains is strategically chosen to increase the likelihood of audience exposure. Despite the Master Settlement Agreement, tobacco advertising remains prevalent in many sports. A new trend of placing alcohol and tobacco brand names in commercials for other products is evident. Conclusions. Alcohol and tobacco marketers appear able to cleverly adapt to advertising challenges, such as digital video recorders and legislation. Alcohol and tobacco brands remain visible on sports programming. PMID:16809598

Ten years and 1 master settlement agreement later: the nature and frequency of alcohol and tobacco promotion in televised sports, 2000 through 2002.

PubMed

Zwarun, Lara

2006-08-01

I sought to identify what kinds of promotion for alcohol and tobacco products are found in televised sports programming, as well as how frequently they occur. I compared my findings with data from 5 and 10 years earlier to examine the effects of the Master Settlement Agreement and detect industry trends. Method. A content analysis of more than 83 hours of televised sports programming from 2000 through 2002 was conducted. Composite week sampling was used to ensure results were representative of the overall population of television sports programs. Programs were examined for traditional advertising (commercials) and nontraditional advertising (stadium signs, announcer voiceovers, etc.). Rates of certain types of alcohol advertising have decreased, but what remains is strategically chosen to increase the likelihood of audience exposure. Despite the Master Settlement Agreement, tobacco advertising remains prevalent in many sports. A new trend of placing alcohol and tobacco brand names in commercials for other products is evident. Alcohol and tobacco marketers appear able to cleverly adapt to advertising challenges, such as digital video recorders and legislation. Alcohol and tobacco brands remain visible on sports programming.

The intrinsic mechanical nonlinearity 3Q0(ω) of linear homopolymer melts

NASA Astrophysics Data System (ADS)

Cziep, Miriam Angela; Abbasi, Mahdi; Wilhelm, Manfred

2017-05-01

Medium amplitude oscillatory shear (MAOS) in combination with Fourier Transformation of the mechanical stress signal (FT rheology) was utilized to investigate the influence of molecular weight, molecular weight distribution and the monomer on the intrinsic nonlinearity 3Q0(ω). Nonlinear master curves of 3Q0(ω) have been created, applying the time-temperature superposition (TTS) principle. These master curves showed a characteristic shape with an increasing slope at small frequencies, a maximum 3Q0,max and a decreasing slope at high frequencies. 3Q0(De) master curves of monodisperse polymers were evaluated and quantified with the help of a semi-empiric equation, derived from predictions from the pom-pom and molecular stress function (MSF) models. This resulted in a monomer independent description of the nonlinear mechanical behavior of linear, monodisperse homopolymer melts, where 3Q0(ω,Z) is only a function of the frequency ω and the number of entanglements Z. For polydisperse samples, 3Q0(ω) showed a high sensitivity within the experimental window towards an increasing PDI. At small frequencies, the slope of 3Q0(ω) decreases until approximately zero as a plateau value is reached, starting at a PDI around 2 and higher.

Programme evaluation training for health professionals in francophone Africa: process, competence acquisition and use

PubMed Central

Ridde, Valéry; Fournier, Pierre; Banza, Baya; Tourigny, Caroline; Ouédraogo, Dieudonné

2009-01-01

Background While evaluation is, in theory, a component of training programmes in health planning, training needs in this area remain significant. Improving health systems necessarily calls for having more professionals who are skilled in evaluation. Thus, the Université de Ouagadougou (Burkina Faso) and the Université de Montréal (Canada) have partnered to establish, in Burkina Faso, a master's-degree programme in population and health with a course in programme evaluation. This article describes the four-week (150-hour) course taken by two cohorts (2005–2006/2006–2007) of health professionals from 11 francophone African countries. We discuss how the course came to be, its content, its teaching processes and the master's programme results for students. Methods The conceptual framework was adapted from Kirkpatrick's (1996) four-level evaluation model: reaction, learning, behaviour, results. Reaction was evaluated based on a standardized questionnaire for all the master's courses and lessons. Learning and behaviour competences were assessed by means of a questionnaire (pretest/post-test, one year after) adapted from the work of Stevahn L, King JA, Ghere G, Minnema J: Establishing Essential Competencies for Program Evaluators. Am J Eval 2005, 26(1):43–59. Master's programme effects were tested by comparing the difference in mean scores between times (before, after, one year after) using pretest/post-test designs. Paired sample tests were used to compare mean scores. Results The teaching is skills-based, interactive and participative. Students of the first cohort gave the evaluation course the highest score (4.4/5) for overall satisfaction among the 16 courses (3.4–4.4) in the master's programme. What they most appreciated was that the forms of evaluation were well adapted to the content and format of the learning activities. By the end of the master's programme, both cohorts of students considered that they had greatly improved their mastery of the 60 competences (p < 0.001). This level was maintained one year after completing the master's degree, except for reflective practice (p < 0.05). Those who had carried out an evaluation in the intervening 12 months reported a negative gap between their declared mastery and their actual application. However, this is only statistically significant for reflective practice (p < 0.05). Conclusion This study shows the importance of integrating summative evaluation into the learning process. Skills-based teaching is much appreciated and well-adapted. Creating a master's programme in population and health in Africa and providing training in evaluation to high-level health professionals from many countries augurs well for scaling up the practice of evaluation in African health systems. PMID:19146690

Prior Work and Educational Experience Are Not Associated With Successful Completion of a Master's-Level, Distance Education Midwifery Program.

PubMed

Niemczyk, Nancy A; Cutts, Alison; Perlman, Dana B

2018-03-01

In order to increase and diversify the midwifery workforce, admissions criteria for midwifery education programs must not contain unnecessary barriers to entry. Once accepted, students need to successfully complete the program. Many admissions criteria commonly used in midwifery education programs in the United States are not evidence based and could be unnecessary barriers to education. The primary objective of this study was to identify factors known during the admission process that were related to successful completion or failure to complete a midwifery program educating both student nurse-midwives (SNMs) and student midwives (SMs); a secondary objective was to quantify reasons for program noncompletion. This master's-level, distance education program educates a diverse group of both SNMs and SMs. A pilot, retrospective cohort study examined all students matriculating at the program from fall 2012 on and scheduled to graduate by summer 2016 (N = 58). Demographic information, admissions information, academic records, and advising notes were reviewed. Reasons for noncompletion were identified, and characteristics were compared between students who did and did not complete the program. Program completion was not significantly associated with students' status as nurses prior to admission, labor and delivery nursing experience, length of nursing experience, nursing degree held, presence of children at home, working while in school, or undergraduate grade point average. Being a nurse, years of nursing experience, type of nursing degree, or labor and delivery nursing experience were not associated with completion of this midwifery program. © 2018 by the American College of Nurse-Midwives.

Women's autonomy and scheduled cesarean sections in Brazil: a cautionary tale.

PubMed

Potter, Joseph E; Hopkins, Kristine; Faúndes, Anibal; Perpétuo, Ignez

2008-03-01

In Brazil, one-fourth of all women deliver in the private sector, where the rate of cesarean deliveries is extremely high (70%). Most (64%) private sector cesareans are scheduled, although many women would have preferred a vaginal delivery. The question this study addresses is whether childbearing women were induced to accept the procedure by their physicians, and if so, how? Three face-to-face structured interviews were conducted with 1,612 women (519 private sector and 1,093 public sector) early in pregnancy, approximately 1 month before their due date, and approximately 1 month postpartum. For all private sector patients having a scheduled cesarean section, women's self-reported reasons given for programming surgical delivery were classified into three groups according to obstetrical justification. After loss to follow-up (19.2% of private sector and 34.4% of public sector), our final sample included 1,136 women (419 private sector and 717 public sector). Compared with public sector participants in the final sample, on average, private sector participants were older by 3.4 years (28.7 vs 25.3 yr), had 0.4 fewer previous deliveries (0.6 vs 1.0), and had 3.4 more years of education (11.0 vs 7.6 yr). The final samples also differed slightly with respect to preference for vaginal delivery: 72.3 percent among those in the private sector and 79.6 percent in public sector. The cesarean section rate was 72 percent in the private sector and 31 percent in the public sector. Of the women with reports about the timing of the cesarean decision, 64.4 percent had a scheduled cesarean delivery in the private sector compared with 23.7 percent in the public sector. Many cesarean sections were scheduled for an "unjustified" medical reason, especially among women who, during pregnancy, had declared a preference for a vaginal delivery. Among 96 women in this latter group, the reason reported for the procedure was unjustified in 33 cases. On the other hand, more cesarean deliveries were scheduled for "no medical justification," including physician's or the woman's convenience, among women who preferred to deliver by cesarean (35/65). The incidence of real medical reasons for a scheduled cesarean section diagnosed before the onset of labor among private sector patients who had no previous cesarean birth and who wanted a vaginal delivery was 13 percent (31/243). The data suggest that doctors frequently persuaded their patients to accept a scheduled cesarean section for conditions that either did not exist or did not justify this procedure. The problem identified in this paper may extend well beyond Brazil and should be of concern to those with responsibility for ethical behavior in obstetrics.

Reliability and validity of the 12-item WHODAS 2.0 in patients with Kashin-Beck disease.

PubMed

Younus, Mohammad Imran; Wang, Di-Miao; Yu, Fang-Fang; Fang, Hua; Guo, Xiong

2017-09-01

The purpose of this study was to check the reliability and validity of the 12-item Chinese version of the World Health Organization Disability Assessment Schedule 2.0 (WHODAS 2.0) for the assessment of disability in patients with Kashin-Beck disease (KBD). We recruited 219 patients with KBD from the high-risk KBD area in the Shaanxi province, using stratified multistage random sampling. We assessed each patient using the Chinese version of the 12-item WHODAS 2.0 and the Western Ontario and McMaster Universities Index of Osteoarthritis (WOMAC). Statistical evaluations of the instruments consisted of Cronbach's alpha, intraclass correlation coefficient (ICC), confirmatory factor analysis (CFA), and Pearson's correlation coefficient. Cronbach's alpha and ICC for the six domains ranged from 0.704 to 0.906 and 0.690 to 0.852, respectively. A six-factor structure fits the data well (CFI = 0.967, TLI = 0.944, RMSEA = 0.08). Regarding convergent validity, the four domains of the 12-item WHODAS 2.0 (getting around, self-care, life activity, and participation) showed moderate-to-strong correlation for all three domains of the WOMAC (0.428 < |r| < 0.804). Regarding divergent validity, the two domains of the 12-item WHODAS 2.0 (understanding and communication, and getting along with people) showed weak correlation for the three domains of WOMAC (0.182 < |r| < 0.295). The Chinese version of 12-item WHODAS 2.0 questionnaire is a reliable and valid instrument when administered to KBD patients.

Predicting Scheduling and Attending for an Oral Cancer Examination

PubMed Central

Shepperd, James A.; Emanuel, Amber S.; Howell, Jennifer L.; Logan, Henrietta L.

2015-01-01

Background Oral and pharyngeal cancer is highly treatable if diagnosed early, yet late diagnosis is commonplace apparently because of delays in undergoing an oral cancer examination. Purpose We explored predictors of scheduling and attending an oral cancer examination among a sample of Black and White men who were at high risk for oral cancer because they smoked. Methods During an in-person interview, participants (N = 315) from rural Florida learned about oral and pharyngeal cancer, completed survey measures, and were offered a free examination in the next week. Later, participants received a follow-up phone call to explore why they did or did not attend their examination. Results Consistent with the notion that scheduling and attending an oral cancer exam represent distinct decisions, we found that the two outcomes had different predictors. Defensive avoidance and exam efficacy predicted scheduling an examination; exam efficacy and having coping resources, time, and transportation predicted attending the examination. Open-ended responses revealed that the dominant reasons participants offered for missing a scheduled examination was conflicting obligations, forgetting, and confusion or misunderstanding about the examination. Conclusions The results suggest interventions to increase scheduling and attending an oral cancer examination. PMID:26152644

Comprehensive Cancer Screening among Unmarried Women Aged 40–75 Years: Results from the Cancer Screening Project for Women

PubMed Central

Rogers, Michelle L.; Armstrong, Gene F.; Rakowski, William; Bowen, Deborah J.; Hughes, Tonda; McGarry, Kelly A.

2009-01-01

Abstract Objectives We explored self-reported rates of individual on-schedule breast, cervical, and colorectal cancer screenings, as well as an aggregate measure of comprehensive screenings, among unmarried women aged 40–75 years. We compared women who partner with women (WPW) or with women and men (WPWM) to women who partner exclusively with men (WPM). We also compared barriers to on-schedule cancer screenings between WPW/WPWM and WPM. Methods Comparable targeted and respondent-driven sampling methods were used to enroll 213 WPW/WPWM and 417 WPM (n = 630). Logistic regression models were computed to determine if partner gender was associated with each measure of on-schedule screening after controlling for demographic characteristics, health behaviors, and cancer-related experiences. Results Overall, 74.3% of women reported on-schedule breast screening, 78.3% reported on-schedule cervical screening, 66.5% reported on-schedule colorectal screening, and 56.7% reported being on-schedule for comprehensive screening. Partner gender was not associated with any of the measures of on-schedule screening in multivariable analyses. However, women who reported ever putting off, avoiding, or changing the place of screenings because of sexual orientation were less likely to be on-schedule for comprehensive screening. Women who reported barriers associated with taking time from work and body image concerns were also less likely to be on-schedule for comprehensive screening. Conclusions Barriers to cancer screening were comparable across types of examinations as well as between WPW/WPWM and WPM. Developing health promotion programs for unmarried women that address concomitant detection and prevention behaviors may improve the efficiency and effectiveness of healthcare delivery and ultimately assist in reducing multiple disease risks. PMID:19361311

A phase I and pharmacologic trial of two schedules of the proteasome inhibitor, PS-341 (bortezomib, velcade), in patients with advanced cancer.

PubMed

Dy, Grace K; Thomas, James P; Wilding, George; Bruzek, Laura; Mandrekar, Sumithra; Erlichman, Charles; Alberti, Dona; Binger, Kim; Pitot, Henry C; Alberts, Steven R; Hanson, Lorelei J; Marnocha, Rebecca; Tutsch, Kendra; Kaufmann, Scott H; Adjei, Alex A

2005-05-01

To define the toxicities, pharmacodynamics, and clinical activity of the proteasome inhibitor, PS-341 (bortezomib), in patients with advanced malignancies. Twenty-eight patients (14 male and 14 female) received PS-341 twice weekly for 4 of 6 weeks (schedule I). Because toxicity necessitated dose omissions on this schedule, 16 additional patients (12 male and 4 female) received PS-341 twice weekly for 2 of every 3 weeks (schedule II). A total of 73 courses of treatment was given (median, 2; range, 1-4). Inhibition of 20S proteasome activity in peripheral blood mononuclear cells (PBMC) and accumulation of proteasome-targeted polypeptides in tumor tissue were evaluated as pharmacodynamic markers of PS-341 activity. The most common toxicity was thrombocytopenia, which was dose limiting at 1.7 mg/m2 (schedule I) and 1.6 mg/m2 (schedule II), respectively. Sensory neuropathy was dose-limiting in a patient in schedule I. Grade > or =3 toxicities for schedule I were constipation, fatigue, myalgia, and sensory neuropathy. Grade > or =3 toxicities for schedule II were dehydration resulting from diarrhea, nausea and vomiting, fatigue, hypoglycemia, and hypotension. The maximum tolerated dose was 1.5 mg/m2 for both schedules. Reversible dose-dependent decreases in 20S proteasome activity in PBMCs were observed, with 36% inhibition at 0.5 mg/m2, 52% at 0.9 mg/m2, and 75% at 1.25 mg/m2. Accumulation of proteasome-targeted polypeptides was detected in tumor samples after treatment with PS-341. A patient with multiple myeloma had a partial response. PS-341 given 1.5 mg/m2 twice weekly for 2 of every 3 weeks is well tolerated and should be further studied.

48 CFR 217.7103-6 - Modification of master agreements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Modification of master... Master Agreement for Repair and Alteration of Vessels 217.7103-6 Modification of master agreements. (a) Review each master agreement at least annually before the anniversary of its effective date and revise it...

46 CFR 189.35-13 - Master's responsibility.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Master's responsibility. 189.35-13 Section 189.35-13... AND CERTIFICATION Weight Handling Gear § 189.35-13 Master's responsibility. (a) The master of the... permitted to operate the weight handling gear. The master shall designate the operators. (5) A minimum...

46 CFR Sec. 3 - Master's requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Master's requirements. Sec. 3 Section 3 Shipping... Master's requirements. The Master shall: (a) Receive and receipt for the quantities of slop chest items... therefor, at the unit price, specified by the Slop Chest Statement furnished the Master by the General...

48 CFR 217.7103-6 - Modification of master agreements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Modification of master... Master Agreement for Repair and Alteration of Vessels 217.7103-6 Modification of master agreements. (a) Review each master agreement at least annually before the anniversary of its effective date and revise it...

46 CFR 189.35-13 - Master's responsibility.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Master's responsibility. 189.35-13 Section 189.35-13... AND CERTIFICATION Weight Handling Gear § 189.35-13 Master's responsibility. (a) The master of the... permitted to operate the weight handling gear. The master shall designate the operators. (5) A minimum...

48 CFR 217.7103-1 - Content and format of master agreements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... master agreements. 217.7103-1 Section 217.7103-1 Federal Acquisition Regulations System DEFENSE... CONTRACTING METHODS Master Agreement for Repair and Alteration of Vessels 217.7103-1 Content and format of master agreements. Follow the procedures at PGI 217.7103-1 for preparation of master agreements. [71 FR...

48 CFR 217.7103-6 - Modification of master agreements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Modification of master... Master Agreement for Repair and Alteration of Vessels 217.7103-6 Modification of master agreements. (a) Review each master agreement at least annually before the anniversary of its effective date and revise it...

48 CFR 217.7103-1 - Content and format of master agreements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... master agreements. 217.7103-1 Section 217.7103-1 Federal Acquisition Regulations System DEFENSE... CONTRACTING METHODS Master Agreement for Repair and Alteration of Vessels 217.7103-1 Content and format of master agreements. Follow the procedures at PGI 217.7103-1 for preparation of master agreements. [71 FR...

48 CFR 217.7103-1 - Content and format of master agreements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... master agreements. 217.7103-1 Section 217.7103-1 Federal Acquisition Regulations System DEFENSE... CONTRACTING METHODS Master Agreement for Repair and Alteration of Vessels 217.7103-1 Content and format of master agreements. Follow the procedures at PGI 217.7103-1 for preparation of master agreements. [71 FR...

46 CFR Sec. 3 - Master's requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 8 2011-10-01 2011-10-01 false Master's requirements. Sec. 3 Section 3 Shipping... Master's requirements. The Master shall: (a) Receive and receipt for the quantities of slop chest items... therefor, at the unit price, specified by the Slop Chest Statement furnished the Master by the General...

46 CFR Sec. 3 - Master's requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 8 2012-10-01 2012-10-01 false Master's requirements. Sec. 3 Section 3 Shipping... Master's requirements. The Master shall: (a) Receive and receipt for the quantities of slop chest items... therefor, at the unit price, specified by the Slop Chest Statement furnished the Master by the General...

46 CFR Sec. 3 - Master's requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 8 2014-10-01 2014-10-01 false Master's requirements. Sec. 3 Section 3 Shipping... Master's requirements. The Master shall: (a) Receive and receipt for the quantities of slop chest items... therefor, at the unit price, specified by the Slop Chest Statement furnished the Master by the General...

46 CFR Sec. 3 - Master's requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 8 2013-10-01 2013-10-01 false Master's requirements. Sec. 3 Section 3 Shipping... Master's requirements. The Master shall: (a) Receive and receipt for the quantities of slop chest items... therefor, at the unit price, specified by the Slop Chest Statement furnished the Master by the General...

46 CFR 189.35-13 - Master's responsibility.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Master's responsibility. 189.35-13 Section 189.35-13... AND CERTIFICATION Weight Handling Gear § 189.35-13 Master's responsibility. (a) The master of the... permitted to operate the weight handling gear. The master shall designate the operators. (5) A minimum...

46 CFR 189.35-13 - Master's responsibility.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Master's responsibility. 189.35-13 Section 189.35-13... AND CERTIFICATION Weight Handling Gear § 189.35-13 Master's responsibility. (a) The master of the... permitted to operate the weight handling gear. The master shall designate the operators. (5) A minimum...

48 CFR 217.7103-1 - Content and format of master agreements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... master agreements. 217.7103-1 Section 217.7103-1 Federal Acquisition Regulations System DEFENSE... CONTRACTING METHODS Master Agreement for Repair and Alteration of Vessels 217.7103-1 Content and format of master agreements. Follow the procedures at PGI 217.7103-1 for preparation of master agreements. [71 FR...

48 CFR 217.7103-1 - Content and format of master agreements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... master agreements. 217.7103-1 Section 217.7103-1 Federal Acquisition Regulations System DEFENSE... CONTRACTING METHODS Master Agreement for Repair and Alteration of Vessels 217.7103-1 Content and format of master agreements. Follow the procedures at PGI 217.7103-1 for preparation of master agreements. [71 FR...

48 CFR 217.7103-6 - Modification of master agreements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Modification of master... Master Agreement for Repair and Alteration of Vessels 217.7103-6 Modification of master agreements. (a) Review each master agreement at least annually before the anniversary of its effective date and revise it...

48 CFR 217.7103-6 - Modification of master agreements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Modification of master... Master Agreement for Repair and Alteration of Vessels 217.7103-6 Modification of master agreements. (a) Review each master agreement at least annually before the anniversary of its effective date and revise it...

78 FR 43251 - Grosvenor Alternative Funds Master Trust, et al.; Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-19

... Alternative Funds Master Trust, et al.; Notice of Application July 15, 2013. AGENCY: Securities and Exchange... Alternative Funds Master Trust (``Master Trust''), Grosvenor Alternative Funds (``GAF Trust''), and Grosvenor... calling (202) 551-8090. Applicants' Representations 1. The Master Trust \\1\\ and the GAF Trust...

Scheduling Algorithm for Mission Planning and Logistics Evaluation (SAMPLE). Volume 3: The GREEDY algorithm

NASA Technical Reports Server (NTRS)

Dupnick, E.; Wiggins, D.

1980-01-01

The functional specifications, functional design and flow, and the program logic of the GREEDY computer program are described. The GREEDY program is a submodule of the Scheduling Algorithm for Mission Planning and Logistics Evaluation (SAMPLE) program and has been designed as a continuation of the shuttle Mission Payloads (MPLS) program. The MPLS uses input payload data to form a set of feasible payload combinations; from these, GREEDY selects a subset of combinations (a traffic model) so all payloads can be included without redundancy. The program also provides the user a tutorial option so that he can choose an alternate traffic model in case a particular traffic model is unacceptable.

Knowledge and practice about TT vaccination among undergraduate female medical students.

PubMed

Basher, M S

2010-10-01

Neonatal Tetanus (NT) is a clinical form of tetanus, generally occurs through infection via unhealed umbilicus. Newborns can be successfully protected against tetanus by vaccinating women with Tetanus Toxoid (TT). In our country, target groups for vaccination are vaccinated at Out-reach Centres (ORCs) and fixed centres (health facilities) free of cost. All women of reproductive age group, regardless of their marital and pregnancy status, are accessible to the vaccination programme. Illiteracy is one of the known important factors that stand in the way of vaccination. This descriptive, cross-sectional study was intended to assess knowledge about EPI diseases and vaccines, and TT vaccination status among 62 purposively selected undergraduate female students of Mymensingh Medical College (MMC), Mymensingh of session 2006-2007. Semi-structured interview schedule was used for data collection. Data were managed manually by using master sheet and scientific calculator. Out of sixty-two, 44(70.97%) female students started to receive TT vaccination after completion of 15 years. Of them, only 5(11.36%) had completed the five dose schedule till the conduction of the study. Educational status of women is vital for effective utilization of available preventive health services. Vaccination programme is geographically, economically and culturally accessible in our country. Literacy status of our respondents was very high. Nonetheless, access rate for TT vaccine was very much dissatisfactory. So based on these findings, it can be concluded that creating community awareness is an important factor to improve utilization status of preventive programmes including vaccination.

Cloning SU8 silicon masters using epoxy resins to increase feature replicability and production for cell culture devices.

PubMed

Kamande, J W; Wang, Y; Taylor, A M

2015-05-01

In recent years, there has been a dramatic increase in the use of poly(dimethylsiloxane) (PDMS) devices for cell-based studies. Commonly, the negative tone photoresist, SU8, is used to pattern features onto silicon wafers to create masters (SU8-Si) for PDMS replica molding. However, the complexity in the fabrication process, low feature reproducibility (master-to-master variability), silane toxicity, and short life span of these masters have been deterrents for using SU8-Si masters for the production of cell culture based PDMS microfluidic devices. While other techniques have demonstrated the ability to generate multiple devices from a single master, they often do not match the high feature resolution (∼0.1 μm) and low surface roughness that soft lithography masters offer. In this work, we developed a method to fabricate epoxy-based masters that allows for the replication of features with high fidelity directly from SU8-Si masters via their PDMS replicas. By this method, we show that we could obtain many epoxy based masters with equivalent features to a single SU8-Si master with a low feature variance of 1.54%. Favorable feature transfer resolutions were also obtained by using an appropriate Tg epoxy based system to ensure minimal shrinkage of features ranging in size from ∼100 μm to <10 μm in height. We further show that surface coating epoxy masters with Cr/Au lead to effective demolding and yield PDMS chambers that are suitable for long-term culturing of sensitive primary hippocampal neurons. Finally, we incorporated pillars within the Au-epoxy masters to eliminate the process of punching media reservoirs and thereby reducing substantial artefacts and wastage.

Cloning SU8 silicon masters using epoxy resins to increase feature replicability and production for cell culture devices

PubMed Central

Kamande, J. W.; Wang, Y.; Taylor, A. M.

2015-01-01

In recent years, there has been a dramatic increase in the use of poly(dimethylsiloxane) (PDMS) devices for cell-based studies. Commonly, the negative tone photoresist, SU8, is used to pattern features onto silicon wafers to create masters (SU8-Si) for PDMS replica molding. However, the complexity in the fabrication process, low feature reproducibility (master-to-master variability), silane toxicity, and short life span of these masters have been deterrents for using SU8-Si masters for the production of cell culture based PDMS microfluidic devices. While other techniques have demonstrated the ability to generate multiple devices from a single master, they often do not match the high feature resolution (∼0.1 μm) and low surface roughness that soft lithography masters offer. In this work, we developed a method to fabricate epoxy-based masters that allows for the replication of features with high fidelity directly from SU8-Si masters via their PDMS replicas. By this method, we show that we could obtain many epoxy based masters with equivalent features to a single SU8-Si master with a low feature variance of 1.54%. Favorable feature transfer resolutions were also obtained by using an appropriate Tg epoxy based system to ensure minimal shrinkage of features ranging in size from ∼100 μm to <10 μm in height. We further show that surface coating epoxy masters with Cr/Au lead to effective demolding and yield PDMS chambers that are suitable for long-term culturing of sensitive primary hippocampal neurons. Finally, we incorporated pillars within the Au-epoxy masters to eliminate the process of punching media reservoirs and thereby reducing substantial artefacts and wastage. PMID:26180572

The master degree: A critical transition in STEM doctoral education

NASA Astrophysics Data System (ADS)

Lange, Sheila Edwards

The need to broaden participation in the nation's science, technology, engineering, and mathematics (STEM) undergraduate and graduate programs is currently a matter of national urgency. The small number of women and underrepresented minorities (URM) earning doctoral degrees in STEM is particularly troubling given significant increases in the number of students earning master's degrees since 1990. In the decade between 1990 and 2000, the total number of master's recipients increased by 42%. During this same time period, the number of women earning master's degrees increased by 56%, African Americans increased by 132%, American Indians by 101%, Hispanics by 146%, and Asian Americans by 117% (Syverson, 2003). Growth in underrepresented group education at the master's level raises questions about the relationship between master's and doctoral education. Secondary data analysis of the Survey of Earned Doctorates (SED) was used to examine institutional pathways to the doctorate in STEM disciplines and transitions from master's to doctoral programs by race and gender. While the study revealed no significant gender differences in pathways, compared to White and Asian American students, URM students take significantly different pathways to the doctorate. URM students are significantly more likely to earn the bachelor's, master's, and doctoral degrees at three different institutions. Their path is significantly more likely to include earning a master's degree en route to the doctorate. Further, URM students are more likely to experience transition between the master's and doctoral degrees, and the transitions are not limited to those who earn master's degrees at master's-only institutions. These findings suggest that earning a master's degree is more often a stepping stone to the doctorate for URM students. Master's degree programs, therefore, have the potential to be a valuable resource for policymakers and graduate programs seeking to increase the diversity of URM students earning doctorates in STEM.

Dual arm master controller for a bilateral servo-manipulator

DOEpatents

Kuban, Daniel P.; Perkins, Gerald S.

1989-01-01

A master controller for a mechanically dissimilar bilateral slave servo-manipulator is disclosed. The master controller includes a plurality of drive trains comprising a plurality of sheave arrangements and cables for controlling upper and lower degrees of master movement. The cables and sheaves of the master controller are arranged to effect kinematic duplication of the slave servo-manipulator, despite mechanical differences therebetween. A method for kinematically matching a master controller to a slave servo-manipulator is also disclosed.

The impact of mindfulness education on elementary school students: Evaluation of the Master Mind Program

PubMed Central

Parker, Alison E.; Kupersmidt, Janis B.; Mathis, Erin T.; Scull, Tracy M.; Sims, Calvin

2016-01-01

Children need to be equipped with the skills to respond effectively to stress and prevent poor decision-making surrounding alcohol and tobacco use. Training and practice in mindfulness is one possible avenue for building children's skills. Recent research has revealed that mindfulness education in the classroom may play a role in enhancing children's self-regulatory abilities. Thus, the goal of the current study was to extend existing research in mindfulness education in classrooms and conduct an assessment of the feasibility and effectiveness of a new mindfulness education, substance abuse prevention program for 4th and 5th grade children (Master Mind). Two elementary schools were randomly assigned to be an intervention group (N = 71) or waitlist control group (N = 40). Students in the intervention group were taught the four-week Master Mind program by their regular classroom teachers. At pre- and post-intervention time points, students completed self-reports of their intentions to use substances and an executive functioning performance task. Teachers rated students on their behavior in the classroom. Findings revealed that students who participated in the Master Mind program, as compared to those in the wait-list control condition, showed significant improvements in executive functioning skills (girls and boys), as well as a marginally significant increase in self-control abilities (boys only). In addition, significant reductions were found in aggression and social problems (girls and boys), as well as anxiety (girls only). No significant differences across groups were found for intentions to use alcohol or tobacco. Teachers implemented the program with fidelity; both teachers and students positively rated the structure and content of the Master Mind program, providing evidence of program satisfaction and feasibility. Although generalization may be limited by the small sample size, the findings suggest that mindfulness education may be beneficial in increasing self-regulatory abilities, which is important for substance abuse prevention. PMID:27057208

The impact of mindfulness education on elementary school students: Evaluation of the Master Mind Program.

PubMed

Parker, Alison E; Kupersmidt, Janis B; Mathis, Erin T; Scull, Tracy M; Sims, Calvin

Children need to be equipped with the skills to respond effectively to stress and prevent poor decision-making surrounding alcohol and tobacco use. Training and practice in mindfulness is one possible avenue for building children's skills. Recent research has revealed that mindfulness education in the classroom may play a role in enhancing children's self-regulatory abilities. Thus, the goal of the current study was to extend existing research in mindfulness education in classrooms and conduct an assessment of the feasibility and effectiveness of a new mindfulness education, substance abuse prevention program for 4 th and 5 th grade children ( Master Mind ). Two elementary schools were randomly assigned to be an intervention group (N = 71) or waitlist control group (N = 40). Students in the intervention group were taught the four-week Master Mind program by their regular classroom teachers. At pre- and post-intervention time points, students completed self-reports of their intentions to use substances and an executive functioning performance task. Teachers rated students on their behavior in the classroom. Findings revealed that students who participated in the Master Mind program, as compared to those in the wait-list control condition, showed significant improvements in executive functioning skills (girls and boys), as well as a marginally significant increase in self-control abilities (boys only). In addition, significant reductions were found in aggression and social problems (girls and boys), as well as anxiety (girls only). No significant differences across groups were found for intentions to use alcohol or tobacco. Teachers implemented the program with fidelity; both teachers and students positively rated the structure and content of the Master Mind program, providing evidence of program satisfaction and feasibility. Although generalization may be limited by the small sample size, the findings suggest that mindfulness education may be beneficial in increasing self-regulatory abilities, which is important for substance abuse prevention.

An overview of the Columbia Habitat Monitoring Program's (CHaMP) spatial-temporal design framework

EPA Science Inventory

We briefly review the concept of a master sample applied to stream networks in which a randomized set of stream sites is selected across a broad region to serve as a list of sites from which a subset of sites is selected to achieve multiple objectives of specific designs. The Col...

The Interplay among Environmental Attitudes, Pro-Environmental Behavior, Social Identity, and Pro-Environmental Institutional Climate. A Longitudinal Study

ERIC Educational Resources Information Center

Prati, Gabriele; Albanesi, Cinzia; Pietrantoni, Luca

2017-01-01

By using a panel design in a sample of 298 undergraduate/master students at an Italian public university, the present study aimed to test longitudinally the interplay among environmental attitudes, pro-environmental behavior, social identity, and pro-environmental institutional climate. The relationships were tested with cross-lagged analysis…

Nurses' Attitudes toward Gay and Hemophiliac Patients with AIDS.

ERIC Educational Resources Information Center

Strasser, Judith A.; Damrosch, Shirley

A sample of nurses (N=183) enrolled in a School of Nursing's master degree program was randomly assigned to read one of six vignettes about a patient who differed only in terms of diagnosis and lifestyle. Possible diagnoses were Acquired Immune Deficiency Syndrome (AIDS), AIDS acquired by a hemophiliac through blood therapy, and leukemia; possible…

International Students' Perceptions of Their Learning Environment in Graduate Programs at One Normal University in China

ERIC Educational Resources Information Center

Lwin, Thawdar; Aslam, Sarfraz; Mukhale, Phoebe Naliaka

2017-01-01

This study was an investigation of the international students' perceptions of their learning environment in graduate programs at one normal university in China. The study used both quantitative and qualitative research methods. The sample comprised 91 international students, 51 Master and 40 doctoral from three schools: Education, Life Sciences…

Relationships between Students' Strategies for Influencing Their Study Environment and Their Strategic Approach to Studying

ERIC Educational Resources Information Center

Jungert, Tomas; Rosander, Michael

2009-01-01

The purpose of this study was to investigate the relationship between student influence, students' strategic approaches to studying and academic achievement, and to examine differences between students in a Master's programme in Engineering with conventional teaching and one based on problem-based learning in a sample of 268 students. A version of…

The Assessment of the Perception of the Academic Self Efficacy of Turkish Education Graduate Students

ERIC Educational Resources Information Center

Gocer, Ali

2013-01-01

The purpose of this research is to determine the perception of the academic self efficacy of Turkish Education graduate students. This study applied qualitative research approach and interview method. Master's students of Erciyes University, Institute of Education Science were chosen as a sample for the purpose, using clustering method. In this…

Improving Writing: Comparing the Responses of Eighth-Graders, Preservice Teachers and Experienced Teachers

ERIC Educational Resources Information Center

Grisham, Dana L.; Wolsey, Thomas D.

2005-01-01

This study investigates how middle school students and teachers in preservice and master of arts classes analyze writing samples. Three sets of participants analyzed and scored a common set of writings. Findings indicate that several intact classroom groups of eighth-graders, preservice teachers, and veteran teachers in a graduate reading program…

Effect of Gender on Teachers' Organizational Culture Perception: A Meta-Analysis

ERIC Educational Resources Information Center

Ipek, Cemalettin; Aytaç, Tufan; Gok, Enes

2015-01-01

This study aims to assess the strength of the effect of gender, if there is any, on the perceptions of teachers on organizational culture in a meta-analysis. 27 studies consisting of Master's theses and PhD dissertations were chosen from the National Thesis/Dissertation Database provided by Turkish Council of Higher Education. The sample consists…

Evaluation of Experimental Four-Day Week Class Schedule, January Through April 1974 at Lake City Community College.

ERIC Educational Resources Information Center

Hardman, Clark

Due to the energy disturbance during the fall and winter of 1973-74, Lake City Community College experimented with a 4-days-per-week schedule of classes. a student evaluation of the 4-day week was completed by 58 percent of the full-time students. Fifty-one percent of the total student sample preferred the 4-day week, and 30 percent preferred the…

The Master Artisan: A Framework for Master Tradespeople in Australia. Occasional Paper

ERIC Educational Resources Information Center

O'Reilly-Briggs, Karen

2011-01-01

The author explores the prospect of improving pathways and opportunities for tradespeople in Australia through the introduction of a masters-level qualification. The study investigates the views and opinions of senior industry representatives and professional educators to determine whether the introduction of a master trade or master artisan…

19 CFR 10.90 - Master records and metal matrices.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Master records and metal matrices. 10.90 Section... Master Records, and Metal Matrices § 10.90 Master records and metal matrices. (a) Consumption entries... made, of each master record or metal matrix covered thereby. (c) A bond on Customs Form 301, containing...

19 CFR 10.90 - Master records and metal matrices.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Master records and metal matrices. 10.90 Section... Master Records, and Metal Matrices § 10.90 Master records and metal matrices. (a) Consumption entries... made, of each master record or metal matrix covered thereby. (c) A bond on Customs Form 301, containing...

20 CFR 632.22 - Modification of a Comprehensive Annual Plan (CAP) and/or Master Plan.

Code of Federal Regulations, 2012 CFR

2012-04-01

... (CAP) and/or Master Plan. 632.22 Section 632.22 Employees' Benefits EMPLOYMENT AND TRAINING... Master Plan. (a) The requirements for modifying a Master Plan and/or CAP will be included in administrative instructions issued by the Grant Officer upon final implementation of the Master Plan/CAP system...

21 CFR 111.210 - What must the master manufacturing record include?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 2 2011-04-01 2011-04-01 false What must the master manufacturing record include...: Requirements for the Master Manufacturing Record § 111.210 What must the master manufacturing record include? The master manufacturing record must include: (a) The name of the dietary supplement to be...

21 CFR 111.210 - What must the master manufacturing record include?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 2 2012-04-01 2012-04-01 false What must the master manufacturing record include...: Requirements for the Master Manufacturing Record § 111.210 What must the master manufacturing record include? The master manufacturing record must include: (a) The name of the dietary supplement to be...

21 CFR 111.210 - What must the master manufacturing record include?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 2 2014-04-01 2014-04-01 false What must the master manufacturing record include...: Requirements for the Master Manufacturing Record § 111.210 What must the master manufacturing record include? The master manufacturing record must include: (a) The name of the dietary supplement to be...

19 CFR 10.90 - Master records and metal matrices.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Master records and metal matrices. 10.90 Section... Master Records, and Metal Matrices § 10.90 Master records and metal matrices. (a) Consumption entries... made, of each master record or metal matrix covered thereby. (c) A bond on Customs Form 301, containing...

16 CFR 1011.4 - Forms of advance public notice of meetings; Public Calendar/Master Calendar and Federal Register.

Code of Federal Regulations, 2012 CFR

2012-01-01

...; Public Calendar/Master Calendar and Federal Register. 1011.4 Section 1011.4 Commercial Practices CONSUMER... meetings; Public Calendar/Master Calendar and Federal Register. Advance notice of Agency activities is... Calendar/Master Calendar. (1) The printed Public Calendar and the Master Calendar maintained in the Office...

19 CFR 10.90 - Master records and metal matrices.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Master records and metal matrices. 10.90 Section... Master Records, and Metal Matrices § 10.90 Master records and metal matrices. (a) Consumption entries... made, of each master record or metal matrix covered thereby. (c) A bond on Customs Form 301, containing...

16 CFR 1011.4 - Forms of advance public notice of meetings; Public Calendar/Master Calendar and Federal Register.

Code of Federal Regulations, 2014 CFR

2014-01-01

...; Public Calendar/Master Calendar and Federal Register. 1011.4 Section 1011.4 Commercial Practices CONSUMER... meetings; Public Calendar/Master Calendar and Federal Register. Advance notice of Agency activities is... Calendar/Master Calendar. (1) The printed Public Calendar and the Master Calendar maintained in the Office...

21 CFR 111.210 - What must the master manufacturing record include?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 2 2013-04-01 2013-04-01 false What must the master manufacturing record include...: Requirements for the Master Manufacturing Record § 111.210 What must the master manufacturing record include? The master manufacturing record must include: (a) The name of the dietary supplement to be...

Advising Master's Students Pursuing Doctoral Study: A Survey of Counselor Educators and Supervisors

ERIC Educational Resources Information Center

Sackett, Corrine R.; Hartig, Nadine; Bodenhorn, Nancy; Farmer, Laura B.; Ghoston, Michelle R.; Graham, Jasmine; Lile, Jesse

2015-01-01

This study explored what faculty members are recommending to counselor education master's students regarding post-master's experience when considering doctoral studies and what the current faculty hiring preferences are in reference to the amount of post-master's experience needed. Advisors in counselor education master's programs encounter these…

20 CFR 632.22 - Modification of a Comprehensive Annual Plan (CAP) and/or Master Plan.

Code of Federal Regulations, 2011 CFR

2011-04-01

... (CAP) and/or Master Plan. 632.22 Section 632.22 Employees' Benefits EMPLOYMENT AND TRAINING... Master Plan. (a) The requirements for modifying a Master Plan and/or CAP will be included in administrative instructions issued by the Grant Officer upon final implementation of the Master Plan/CAP system...

Science Professionals: Master's Education for a Competitive World

ERIC Educational Resources Information Center

National Academies Press, 2008

2008-01-01

What are employer needs for staff trained in the natural sciences at the master's degree level? How do master's level professionals in the natural sciences contribute in the workplace? How do master's programs meet or support educational and career goals? "Science Professionals: Master's Education for a Competitive World" examines the answers to…

Experiential Learning: Lessons Learned from the UND Business and Government Symposium

ERIC Educational Resources Information Center

Harsell, Dana Michael; O'Neill, Patrick B.

2010-01-01

The authors describe lessons learned from a limited-duration experiential learning component of a Master's level course. The course is open to Master's in Business and Master's in Public Administration students and explores the relationships between government and business. A complete discussion of the Master's in Business and Master's in Public…

19 CFR 10.90 - Master records and metal matrices.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Master records and metal matrices. 10.90 Section... Master Records, and Metal Matrices § 10.90 Master records and metal matrices. (a) Consumption entries... made, of each master record or metal matrix covered thereby. (c) A bond on Customs Form 301, containing...

CIDR

Science.gov Websites

Employment Opportunities Related Links & Resources Access and Applications Access Applications Example Applications Project Initiation Application Schedule Service Information and Pricing Services Sample

Experiments with a Parallel Multi-Objective Evolutionary Algorithm for Scheduling

NASA Technical Reports Server (NTRS)

Brown, Matthew; Johnston, Mark D.

2013-01-01

Evolutionary multi-objective algorithms have great potential for scheduling in those situations where tradeoffs among competing objectives represent a key requirement. One challenge, however, is runtime performance, as a consequence of evolving not just a single schedule, but an entire population, while attempting to sample the Pareto frontier as accurately and uniformly as possible. The growing availability of multi-core processors in end user workstations, and even laptops, has raised the question of the extent to which such hardware can be used to speed up evolutionary algorithms. In this paper we report on early experiments in parallelizing a Generalized Differential Evolution (GDE) algorithm for scheduling long-range activities on NASA's Deep Space Network. Initial results show that significant speedups can be achieved, but that performance does not necessarily improve as more cores are utilized. We describe our preliminary results and some initial suggestions from parallelizing the GDE algorithm. Directions for future work are outlined.

Parents' nonstandard work schedules and child well-being: a critical review of the literature.

PubMed

Li, Jianghong; Johnson, Sarah E; Han, Wen-Jui; Andrews, Sonia; Kendall, Garth; Strazdins, Lyndall; Dockery, Alfred

2014-02-01

This paper provides a comprehensive review of empirical evidence linking parental nonstandard work schedules to four main child developmental outcomes: internalizing and externalizing problems, cognitive development, and body mass index. We evaluated the studies based on theory and methodological rigor (longitudinal data, representative samples, consideration of selection and information bias, confounders, moderators, and mediators). Of 23 studies published between 1980 and 2012 that met the selection criteria, 21 reported significant associations between nonstandard work schedules and an adverse child developmental outcome. The associations were partially mediated through parental depressive symptoms, low quality parenting, reduced parent-child interaction and closeness, and a less supportive home environment. These associations were more pronounced in disadvantaged families and when parents worked such schedules full time. We discuss the nuance, strengths, and limitations of the existing studies, and propose recommendations for future research.

Associations among Work and Family Health Climate, Health Behaviors, Work Schedule and Body Weight

PubMed Central

Buden, Jennifer C.; Dugan, Alicia G.; Faghri, Pouran D.; Huedo-Medina, Tania B.; Namazi, Sara; Cherniack, Martin G.

2017-01-01

Objectives Correctional employees exhibit elevated obesity rates. This study examines interrelations among health behaviors, health climate, BMI, and work schedule. Methods Using survey results from correctional supervisors (n=157), mediation and moderated-mediation analyses were performed to examine how health behaviors explain relationships between obesity, work health climate (WHC) and family health climate (FHC), and work schedule. Results Over 85% of the sample was overweight/obese (mean BMI=30.20). Higher WHC and FHC were associated with lower BMI, mediated by nutrition and physical activity. The interaction effect between health behavior and work schedule revealed a protective effect on BMI. Overtime shiftwork may share a relationship with BMI. Conclusions Findings may have implications for reexamining organizational policies on maximum weekly overtime in corrections. They provide direction for targeted obesity interventions that encourage a supportive FHC and promote healthy behaviors among supervisors working overtime. PMID:28471768

Pacific Fleet Regional Inventory Stocking Model (PRISM)

DTIC Science & Technology

2003-06-01

Fleet Inventory Management Form ..........................................................................99 19. Master Parts List Input Form...100 20. Master Parts List Update Form...107 26. Master Parts List by APL Report..............................................................................109 27. Master

Individual differences in strategic flight management and scheduling

NASA Technical Reports Server (NTRS)

Wickens, Christopher D.; Raby, Mireille

1991-01-01

A group of 30 instrument-rated pilots was made to fly simulator approaches to three airports under conditions of low, medium, and high workload conditions. An analysis is presently conducted of the difference in discrete task scheduling between the group of 10 highest and 10 lowest performing pilots in the sample; this categorization was based on the mean of various flight-profile measures. The two groups were found to differ from each other only in terms of the time when specific events were conducted, and of the optimality of scheduling for certain high-priority tasks. These results are assessed in view of the relative independence of task-management skills from aircraft-control skills.

Comparison of fecal egg counting methods in four livestock species.

PubMed

Paras, Kelsey L; George, Melissa M; Vidyashankar, Anand N; Kaplan, Ray M

2018-06-15

Gastrointestinal nematode parasites are important pathogens of all domesticated livestock species. Fecal egg counts (FEC) are routinely used for evaluating anthelmintic efficacy and for making targeted anthelmintic treatment decisions. Numerous FEC techniques exist and vary in precision and accuracy. These performance characteristics are especially important when performing fecal egg count reduction tests (FECRT). The objective of this study was to compare the accuracy and precision of three commonly used FEC methods and determine if differences existed among livestock species. In this study, we evaluated the modified-Wisconsin, 3-chamber (high-sensitivity) McMaster, and Mini-FLOTAC methods in cattle, sheep, horses, and llamas in three phases. In the first phase, we performed an egg-spiking study to assess the egg recovery rate and accuracy of the different FEC methods. In the second phase, we examined clinical samples from four different livestock species and completed multiple replicate FEC using each method. In the last phase, we assessed the cheesecloth straining step as a potential source of egg loss. In the egg-spiking study, the Mini-FLOTAC recovered 70.9% of the eggs, which was significantly higher than either the McMaster (P = 0.002) or Wisconsin (P = 0.002). In the clinical samples from ruminants, Mini-FLOTAC consistently yielded the highest EPG, revealing a significantly higher level of egg recovery (P < 0.0001). For horses and llamas, both McMaster and Mini-FLOTAC yielded significantly higher EPG than Wisconsin (P < 0.0001, P < 0.0001, P < 0.001, and P = 0.024). Mini-FLOTAC was the most accurate method and was the most precise test for both species of ruminants. The Wisconsin method was the most precise for horses and McMaster was more precise for llama samples. We compared the Wisconsin and Mini-FLOTAC methods using a modified technique where both methods were performed using either the Mini-FLOTAC sieve or cheesecloth. The differences in the estimated mean EPG on log scale between the Wisconsin and mini-FLOTAC methods when cheesecloth was used (P < 0.0001) and when cheesecloth was excluded (P < 0.0001) were significant, providing strong evidence that the straining step is an important source of error. The high accuracy and precision demonstrated in this study for the Mini-FLOTAC, suggest that this method can be recommended for routine use in all host species. The benefits of Mini-FLOTAC will be especially relevant when high accuracy is important, such as when performing FECRT. Copyright © 2018 Elsevier B.V. All rights reserved.

Launching partnership in optics and photonics education between University of Rochester and Moscow Engineering Physics Institute NRNU MEPhI

NASA Astrophysics Data System (ADS)

Lukishova, Svetlana G.; Zavestovskaya, Irina N.; Zhang, Xi-Cheng; Aleshchenko, Yury A.; Konov, Vitaly I.

2017-08-01

A collaboration in education between the oldest and one of the most comprehensive Optics schools in U.S., the Institute of Optics (IO), University of Rochester (UR), and one of the most recognized Russian university, National Research Nuclear University MEPhI (Moscow Engineering Physics Institute) was started in 2015 by signing an agreement on a double-Master's degree program in optics. It was based on earlier collaboration between research groups in both universities. In summer of 2016, nine UR Optics undergraduate students participated with MEPhI students at the International School on Optics and Laser Physics in MEPhI. During five days they were immersed into the world of cutting edge research, technologies and ideas that Russian, European and U.S. scientists offered them. This School also included tours of MEPhI Nanotechnologies and Lasers Centers and Nano-bioengineering Laboratory as well as of scientific laboratories of the leading institutes in optics, photonics and laser physics of the Russian Academy of Sciences. In December of 2015, one MEPhI Master student visited IO UR for one month for a research project with results presented later at a MEPhI conference. Samples prepared by MEPhI researchers are used in IO students teaching laboratories. One Master student from MEPhI is working now towards the Master's degree at the IO UR. In this paper benefits and pitfalls of a cross-border collaboration are discussed as well as different directions of such a collaboration to provide a high-quality specialization for the students of the 21 century which includes international cooperation.

Rapid prototyping of interfacing microcomponents for printed circuit board-level optical interconnects

NASA Astrophysics Data System (ADS)

Van Erps, Jürgen; Vervaeke, Michael; Thienpont, Hugo

2012-01-01

One of the important challenges for the deployment of the emerging breed of nanotechnology components is interfacing them with the external world, preferably accomplished with low-cost micro-optical devices. For the fabrication of this kind of micro-optical components, we make use of deep proton writing (DPW) as a generic rapid prototyping technology. DPW consists of bombarding polymer samples with swift protons, which results after chemical processing steps in high quality micro-optical components. The strength of the DPW micro-machining technology is the ability to fabricate monolithic building blocks that include micro-optical and mechanical functionalities which can be precisely integrated into more complex photonic systems. In this paper we give an overview of the process steps of the technology and we present several examples of micro-optical and micro-mechanical components, fabricated through DPW, targeting applications in printed circuit baordlevel optical interconnections. These include: high-precision 2-D fiber connectors, discrete out-of-plane coupling structures featuring high-quality 45° and curved micro-mirrors, arrays of high aspect ratio micro-pillars and backplane connectors. While DPW is clearly not a mass fabrication technique as such, one of its assets is that once the master component has been prototyped, a metal mould can be generated from the DPW master by applying electroplating. After removal of the plastic master, this metal mould can be used as a shim in a final microinjection moulding or hot embossing step. This way, the master component can be mass-produced at low cost in a wide variety of high-tech plastics.

Neonatal Intensive Care Nursing Curriculum Challenges based on Context, Input, Process, and Product Evaluation Model: A Qualitative Study.

PubMed

Ashghali-Farahani, Mansoureh; Ghaffari, Fatemeh; Hoseini-Esfidarjani, Sara-Sadat; Hadian, Zahra; Qomi, Robabeh; Dargahi, Helen

2018-01-01

Weakness of curriculum development in nursing education results in lack of professional skills in graduates. This study was done on master's students in nursing to evaluate challenges of neonatal intensive care nursing curriculum based on context, input, process, and product (CIPP) evaluation model. This study was conducted with qualitative approach, which was completed according to the CIPP evaluation model. The study was conducted from May 2014 to April 2015. The research community included neonatal intensive care nursing master's students, the graduates, faculty members, neonatologists, nurses working in neonatal intensive care unit (NICU), and mothers of infants who were hospitalized in such wards. Purposeful sampling was applied. The data analysis showed that there were two main categories: "inappropriate infrastructure" and "unknown duties," which influenced the context formation of NICU master's curriculum. The input was formed by five categories, including "biomedical approach," "incomprehensive curriculum," "lack of professional NICU nursing mentors," "inappropriate admission process of NICU students," and "lack of NICU skill labs." Three categories were extracted in the process, including "more emphasize on theoretical education," "the overlap of credits with each other and the inconsistency among the mentors," and "ineffective assessment." Finally, five categories were extracted in the product, including "preferring routine work instead of professional job," "tendency to leave the job," "clinical incompetency of graduates," "the conflict between graduates and nursing staff expectations," and "dissatisfaction of graduates." Some changes are needed in NICU master's curriculum by considering the nursing experts' comments and evaluating the consequences of such program by them.

Individualized Foreign Language Islands: Sample Materials.

ERIC Educational Resources Information Center

Mountain View School District, CA.

Students at Mountain View High School, California, are participating in an experimental foreign language program which is based on individualized instruction within a modular schedule. This collection of sample materials which students and parents receive reflects the goals and requirements of the program. Materials include: (1) program…

Chemicals of emerging concern in water and bottom sediment in the Great Lakes Basin, 2012: collection methods, analytical methods, quality assurance, and study data

USGS Publications Warehouse

Lee, Kathy E.; Langer, Susan K.; Menheer, Michael A.; Hansen, Donald S.; Foreman, William T.; Furlong, Edward T.; Jorgenson, Zachary G.; Choy, Steven J.; Moore, Jeremy N.; Banda, JoAnn; Gefell, Daniel J.

2015-01-01

During this study, 53 environmental samples, 4 field duplicate samples, and 8 field spike samples of bottom sediment and laboratory matrix-spike samples were analyzed for a wide variety of CECs at the USGS National Water Quality Laboratory using laboratory schedule 5433 for wastewater indicators; research method 6434 for steroid hormones, sterols, and bisphenol A; and research method 9008 for human-use pharmaceuticals and antidepressants. Forty of the 57 chemicals analyzed using laboratory schedule 5433 had detectable concentrations ranging from 1 to 49,000 micrograms per kilogram. Fourteen of the 20 chemicals analyzed using research method 6434 had detectable concentrations ranging from 0.04 to 24,940 nanograms per gram. Ten of the 20 chemicals analyzed using research method 9008 had detectable concentrations ranging from 0.59 to 197.5 micrograms per kilogram. Five of the 11 chemicals analyzed using research method 9008 had detectable concentrations ranging from 1.16 to 25.0 micrograms per kilogram.

2016 NIST (133Xe) and Transfer (131mXe, 133mXe, 135Xe) Calibration Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, Troy A.

A significantly improved calibration of the High Purity Germanium detectors used by the Idaho National Laboratory Noble Gas Laboratory was performed during the annual NIST calibration. New sample spacers provide reproducible and secure support of samples at distances of 4, 12, 24, 50 and 100 cm. Bean, 15mL and 50mL Schlenk tube geometries were calibrated. Also included in this year’s calibration was a correlation of detector dead-time with sample activity that can be used to predict the schedule of counting the samples at each distance for each geometry. This schedule prediction will help staff members set calendar reminders so thatmore » collection of calibration data at each geometry will not be missed. This report also correlates the counting efficiencies between detectors, so that if the counting efficiency on one detector is not known, it can be estimated from the same geometry on another detector.« less

46 CFR 42.15-1 - Information to be supplied to the master.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 2 2014-10-01 2014-10-01 false Information to be supplied to the master. 42.15-1... master. (a) The master of every new vessel shall be supplied with sufficient information in a form... authority. (b) The master of every new vessel, which is not already provided with stability information...

43 CFR 30.122 - Is the judge required to accept the master's recommended decision?

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 1 2012-10-01 2011-10-01 true Is the judge required to accept the master... accept the master's recommended decision? No, the judge is not required to accept the master's... the record of the proceedings heard by the master, including any objections and responses filed, and...

46 CFR 11.463 - General requirements for endorsements as master, mate (pilot), and apprentice mate (steersman) of...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 1 2013-10-01 2013-10-01 false General requirements for endorsements as master, mate... Professional Requirements for Deck Officers § 11.463 General requirements for endorsements as master, mate... endorsements: (1) Master of towing vessels. (2) Master of towing vessels, limited. (3) Mate (pilot) of towing...

21 CFR 111.205 - What is the requirement to establish a master manufacturing record?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What is the requirement to establish a master... System: Requirements for the Master Manufacturing Record § 111.205 What is the requirement to establish a master manufacturing record? (a) You must prepare and follow a written master manufacturing record for...

46 CFR 11.463 - General requirements for endorsements as master, mate (pilot), and apprentice mate (steersman) of...

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 1 2012-10-01 2012-10-01 false General requirements for endorsements as master, mate... Professional Requirements for Deck Officers § 11.463 General requirements for endorsements as master, mate... endorsements: (1) Master of towing vessels. (2) Master of towing vessels, limited. (3) Mate (pilot) of towing...

21 CFR 111.205 - What is the requirement to establish a master manufacturing record?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 2 2014-04-01 2014-04-01 false What is the requirement to establish a master... System: Requirements for the Master Manufacturing Record § 111.205 What is the requirement to establish a master manufacturing record? (a) You must prepare and follow a written master manufacturing record for...

46 CFR 11.463 - General requirements for endorsements as master, mate (pilot), and apprentice mate (steersman) of...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false General requirements for endorsements as master, mate... Professional Requirements for Deck Officers § 11.463 General requirements for endorsements as master, mate... endorsements: (1) Master of towing vessels. (2) Master of towing vessels, limited. (3) Mate (pilot) of towing...

43 CFR 30.122 - Is the judge required to accept the master's recommended decision?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Is the judge required to accept the master... accept the master's recommended decision? No, the judge is not required to accept the master's... the record of the proceedings heard by the master, including any objections and responses filed, and...

43 CFR 2804.18 - What provisions do Master Agreements contain and what are their limitations?

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false What provisions do Master Agreements....18 What provisions do Master Agreements contain and what are their limitations? (a) A Master...) BLM will not enter into any Agreement that is not in the public interest. (c) If you sign a Master...

46 CFR 42.15-1 - Information to be supplied to the master.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Information to be supplied to the master. 42.15-1... master. (a) The master of every new vessel shall be supplied with sufficient information in a form... authority. (b) The master of every new vessel, which is not already provided with stability information...

43 CFR 2804.18 - What provisions do Master Agreements contain and what are their limitations?

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false What provisions do Master Agreements....18 What provisions do Master Agreements contain and what are their limitations? (a) A Master...) BLM will not enter into any Agreement that is not in the public interest. (c) If you sign a Master...

46 CFR 42.15-1 - Information to be supplied to the master.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 2 2012-10-01 2012-10-01 false Information to be supplied to the master. 42.15-1... master. (a) The master of every new vessel shall be supplied with sufficient information in a form... authority. (b) The master of every new vessel, which is not already provided with stability information...

46 CFR 42.15-1 - Information to be supplied to the master.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 2 2013-10-01 2013-10-01 false Information to be supplied to the master. 42.15-1... master. (a) The master of every new vessel shall be supplied with sufficient information in a form... authority. (b) The master of every new vessel, which is not already provided with stability information...

21 CFR 314.420 - Drug master files.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 5 2014-04-01 2014-04-01 false Drug master files. 314.420 Section 314.420 Food... master files. (a) A drug master file is a submission of information to the Food and Drug Administration by a person (the drug master file holder) who intends it to be used for one of the following purposes...

46 CFR 42.15-1 - Information to be supplied to the master.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 2 2011-10-01 2011-10-01 false Information to be supplied to the master. 42.15-1... master. (a) The master of every new vessel shall be supplied with sufficient information in a form... authority. (b) The master of every new vessel, which is not already provided with stability information...

43 CFR 2804.18 - What provisions do Master Agreements contain and what are their limitations?

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false What provisions do Master Agreements....18 What provisions do Master Agreements contain and what are their limitations? (a) A Master...) BLM will not enter into any Agreement that is not in the public interest. (c) If you sign a Master...

16 CFR § 1011.4 - Forms of advance public notice of meetings; Public Calendar/Master Calendar and Federal Register.

Code of Federal Regulations, 2013 CFR

2013-01-01

...; Public Calendar/Master Calendar and Federal Register. § 1011.4 Section § 1011.4 Commercial Practices... notice of meetings; Public Calendar/Master Calendar and Federal Register. Advance notice of Agency...) Public Calendar/Master Calendar. (1) The printed Public Calendar and the Master Calendar maintained in...

43 CFR 2804.18 - What provisions do Master Agreements contain and what are their limitations?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false What provisions do Master Agreements....18 What provisions do Master Agreements contain and what are their limitations? (a) A Master...) BLM will not enter into any Agreement that is not in the public interest. (c) If you sign a Master...

46 CFR 11.463 - General requirements for endorsements as master, mate (pilot), and apprentice mate (steersman) of...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 1 2011-10-01 2011-10-01 false General requirements for endorsements as master, mate... Professional Requirements for Deck Officers § 11.463 General requirements for endorsements as master, mate... endorsements: (1) Master of towing vessels. (2) Master of towing vessels, limited. (3) Mate (pilot) of towing...

43 CFR 30.122 - Is the judge required to accept the master's recommended decision?

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 1 2013-10-01 2013-10-01 false Is the judge required to accept the master... accept the master's recommended decision? No, the judge is not required to accept the master's... the record of the proceedings heard by the master, including any objections and responses filed, and...

43 CFR 30.122 - Is the judge required to accept the master's recommended decision?

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 1 2014-10-01 2014-10-01 false Is the judge required to accept the master... accept the master's recommended decision? No, the judge is not required to accept the master's... the record of the proceedings heard by the master, including any objections and responses filed, and...

21 CFR 111.205 - What is the requirement to establish a master manufacturing record?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 2 2013-04-01 2013-04-01 false What is the requirement to establish a master... System: Requirements for the Master Manufacturing Record § 111.205 What is the requirement to establish a master manufacturing record? (a) You must prepare and follow a written master manufacturing record for...

43 CFR 30.122 - Is the judge required to accept the master's recommended decision?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 1 2011-10-01 2011-10-01 false Is the judge required to accept the master... accept the master's recommended decision? No, the judge is not required to accept the master's... the record of the proceedings heard by the master, including any objections and responses filed, and...

Defense.gov Special Report: A Nation's Gratitude

Science.gov Websites

Deployments, 2003-2006 Baghdad, Ramadi Air Force Master Sgt. Jessica R. Coombs Air Force Master Sgt. Jessica R . Coombs 40th Expeditionary Support Squadron June 2011 - December 2011 Ali Air Base Indiana Army Master Sgt Multiple Deployments, 2004-2007 Fallujah, Ramadi Air Force Master Sgt. Jeremy G. Coombs Air Force Master