On the modelling of complex kinematic hardening and nonquadratic anisotropic yield criteria at finite strains: application to sheet metal forming

NASA Astrophysics Data System (ADS)

Grilo, Tiago J.; Vladimirov, Ivaylo N.; Valente, Robertt A. F.; Reese, Stefanie

2016-06-01

In the present paper, a finite strain model for complex combined isotropic-kinematic hardening is presented. It accounts for finite elastic and finite plastic strains and is suitable for any anisotropic yield criterion. In order to model complex cyclic hardening phenomena, the kinematic hardening is described by several back stress components. To that end, a new procedure is proposed in which several multiplicative decompositions of the plastic part of the deformation gradient are considered. The formulation incorporates a completely general format of the yield function, which means that any yield function can by employed by following a procedure that ensures the principle of material frame indifference. The constitutive equations are derived in a thermodynamically consistent way and numerically integrated by means of a backward-Euler algorithm based on the exponential map. The performance of the constitutive model is assessed via numerical simulations of industry-relevant sheet metal forming processes (U-channel forming and draw/re-draw of a panel benchmarks), the results of which are compared to experimental data. The comparison between numerical and experimental results shows that the use of multiple back stress components is very advantageous in the description of springback. This holds in particular if one carries out a comparison with the results of using only one component. Moreover, the numerically obtained results are in excellent agreement with the experimental data.

Reducing bias and analyzing variability in the time-left procedure.

PubMed

Trujano, R Emmanuel; Orduña, Vladimir

2015-04-01

The time-left procedure was designed to evaluate the psychophysical function for time. Although previous results indicated a linear relationship, it is not clear what role the observed bias toward the time-left option plays in this procedure and there are no reports of how variability changes with predicted indifference. The purposes of this experiment were to reduce bias experimentally, and to contrast the difference limen (a measure of variability around indifference) with predictions from scalar expectancy theory (linear timing) and behavioral economic model (logarithmic timing). A control group of 6 rats performed the original time-left procedure with C=60 s and S=5, 10,…, 50, 55 s, whereas a no-bias group of 6 rats performed the same conditions in a modified time-left procedure in which only a single response per choice trial was allowed. Results showed that bias was reduced for the no-bias group, observed indifference grew linearly with predicted indifference for both groups, and difference limen and Weber ratios decreased as expected indifference increased for the control group, which is consistent with linear timing, whereas for the no-bias group they remained constant, consistent with logarithmic timing. Therefore, the time-left procedure generates results consistent with logarithmic perceived time once bias is experimentally reduced. Copyright © 2015 Elsevier B.V. All rights reserved.

Window Frame Types | Efficient Windows Collaborative

Science.gov Websites

metal frames. Metal Frames Metal Frame with Thermal Break Non-metal Frames Non-metal There is a variety of non-metal framing materials for windows including, wood, wood with metal/vinyl cladding, vinyl disadvantages. Non-metal Frames Non-metal Frame, Thermally Improved Does frame material type matter? The

Framework for non-coherent interface models at finite displacement jumps and finite strains

NASA Astrophysics Data System (ADS)

Ottosen, Niels Saabye; Ristinmaa, Matti; Mosler, Jörn

2016-05-01

This paper deals with a novel constitutive framework suitable for non-coherent interfaces, such as cracks, undergoing large deformations in a geometrically exact setting. For this type of interface, the displacement field shows a jump across the interface. Within the engineering community, so-called cohesive zone models are frequently applied in order to describe non-coherent interfaces. However, for existing models to comply with the restrictions imposed by (a) thermodynamical consistency (e.g., the second law of thermodynamics), (b) balance equations (in particular, balance of angular momentum) and (c) material frame indifference, these models are essentially fiber models, i.e. models where the traction vector is collinear with the displacement jump. This constraints the ability to model shear and, in addition, anisotropic effects are excluded. A novel, extended constitutive framework which is consistent with the above mentioned fundamental physical principles is elaborated in this paper. In addition to the classical tractions associated with a cohesive zone model, the main idea is to consider additional tractions related to membrane-like forces and out-of-plane shear forces acting within the interface. For zero displacement jump, i.e. coherent interfaces, this framework degenerates to existing formulations presented in the literature. For hyperelasticity, the Helmholtz energy of the proposed novel framework depends on the displacement jump as well as on the tangent vectors of the interface with respect to the current configuration - or equivalently - the Helmholtz energy depends on the displacement jump and the surface deformation gradient. It turns out that by defining the Helmholtz energy in terms of the invariants of these variables, all above-mentioned fundamental physical principles are automatically fulfilled. Extensions of the novel framework necessary for material degradation (damage) and plasticity are also covered.

Religious Traditions and Prenatal Genetic Counseling

PubMed Central

Anderson, Rebecca Rae

2009-01-01

Members of organized religious groups may look to their faith traditions for guidance regarding the moral implications of prenatal diagnosis and intervention. Many denominations have doctrinal statements relevant to these deliberations. In this paper, common spiritual issues arising in the genetic counseling encounter are described. Representative doctrinal positions, derived from the responses of 31 U.S. religious denominations to a survey relating to prenatal genetic counseling, are given. Because the long-term adjustment of patients may be dependent in part on their ability to reconcile their actions with their faith traditions, genetic counselors best serve their patients when they invite discussion of matters of faith. Unless invited, patients may assume these topics are ‘off limits’ or that care providers are indifferent to their beliefs. Although genetics professionals ought not assume the role of spiritual advisor, a working knowledge of doctrinal approaches should help counselors frame the issues, and avoid missteps. PMID:19170093

The Effect of Hemispatial Neglect on the Perception of Centre

ERIC Educational Resources Information Center

Olk, Bettina; Wee, Joy; Kingstone, Alan

2004-01-01

Highly variable bisection performance in neglect patients has been attributed to an increased "zone of indifference" (Marshall & Halligan, 1989). The indifference zone indicates the discrepancy between two line lengths which are judged as equal in length. Following this argumentation, the central area of a line should be expanded in neglect…

Ian Hacking, Learner Categories and Human Taxonomies

ERIC Educational Resources Information Center

Davis, Andrew

2008-01-01

I use Ian Hacking's views to explore ways of classifying people, exploiting his distinction between indifferent kinds and interactive kinds, and his accounts of how we "make up" people. The natural kind/essentialist approach to indifferent kinds is explored in some depth. I relate this to debates in psychiatry about the existence of mental…

The Care-Less Manager: Gender, Care and New Managerialism in Higher Education

ERIC Educational Resources Information Center

Grummell, Bernie; Devine, Dympna; Lynch, Kathleen

2009-01-01

While there has always been a profound indifference to the affective domain in formal education, given its Cartesian allegiance to the development of the rational autonomous subject, this indifference to the emotional subject is intensifying with the glorification of performativity. As higher education is especially subject to performance…

Presenting of Indifference Management Model of Education System in Ardabil Province Using Structural Equation Modeling

ERIC Educational Resources Information Center

Abolfazli, Elham; Saidabadi, Reza Yousefi; Fallah, Vahid

2016-01-01

The purpose of the present study is to investigate indifference management structural model in education system of Ardabil Province. The research method was integration study using Alli modeling. Statistical society of research was 420 assistant professors of educational science, managers, and deputies of Ardabil's second period of high schools…

Use of reinforced inorganic cement materials for spark wire and drift chamber wire frames

NASA Technical Reports Server (NTRS)

1987-01-01

The results of a survey, materials test, and analysis study directed toward the development of an inorganic glass-fiber reinforced cement material for use in the construction of space qualified spark wire frames and drift chamber frames are presented. The purpose for this research was to evaluate the feasibility of using glass fiber reinforced cement (GFRC) for large dimensioned structural frames for supporting a number of precisely located spark wires in multiple planes. A survey of the current state of the art in fiber reinforced cement materials was made; material sample mixes were made and tested to determine their laboratory performances. Tests conducted on sample materials showed that compressive and flexural strengths of this material could approach values which would enable fabrication of structural spark wire frames.

The Educational Choice Anomaly for Principles Students: Using Ordinary Supply and Demand Rather than Indifference Curves

ERIC Educational Resources Information Center

Graves, Philip E.; Sexton, Robert L.; Calimeris, Lauren M.

2011-01-01

The surprise value of many economic observations makes the economics discipline quite interesting for many students. One such anomaly is that providing "free" education in an effort to reduce the number of dropouts can often result in a lower level of educational quality purchased. This result is easy to show with indifference curves, but many…

Discounting of qualitatively different delayed health outcomes in current and never smokers

PubMed Central

Friedel, Jonathan E.; DeHart, William B.; Frye, Charles C. J.; Rung, Jillian M.; Odum, Amy L.

2016-01-01

In delay discounting, temporally remote outcomes have less value. Cigarette smoking is associated with steeper discounting of money and consumable outcomes. It is presently unclear whether smokers discount health outcomes more than non-smokers. We sought to establish the generality of steep discounting for different types of health outcomes in cigarette smokers. Seventy participants (38 smokers and 32 non-smokers) completed four hypothetical outcome delay-discounting tasks: a gain of $500, a loss of $500, a temporary boost in health, and temporary cure from a debilitating disease. Participants reported the duration of each health outcome that would be equivalent to $500; these durations were then used in the respective discounting tasks. Delays ranged from 1 week to 25 years. Smokers’ indifference points for monetary gains, boosts in health, and temporary cures were lower than indifference points from non-smokers. Indifference points of one outcome were correlated with indifference points of other outcomes. Smokers demonstrate steeper discounting across a range of delayed outcomes. How a person discounts one outcome predicts how they will discount other outcomes. These two findings support our assertion that delay discounting is in part a trait. PMID:26691848

Material selection in a sustainable manufacturing practice of a badminton racket frame using Elimination and Choice Expressing Reality (ELECTRE) Method

NASA Astrophysics Data System (ADS)

Firdhaus Che Hassan, Muhammad; Rosli, Mohd Uzair Mohd; Redzuan, Muhammad Afiq Mohd

2018-05-01

Badminton is one of the leading sports in the world. It has its own set of rules on the equipments used and general game play. One of the main equipment used is the badminton racket. Each sections of a badminton racket have its own design requirements and one of it is the racket’s material selection. Therefore, material selection is very important to improve the usage of a badminton racket. This study describes the use of the Elimination and Choice Expressing Reality (ELECTRE) method in the material selection of a badminton racket frame with reference to the sustainable manufacturing practice of the frame. By categorizing the materials of the badminton racket frame according to mechanical, physical, chemical and environmental properties, and further detailed sub criteria were set according to the usage of these frames, the ELECTRE I method was used to determine the dominant material. Out of the six materials usually used in the manufacturing of a badminton racket frame, carbon fibre was the dominant material selected from three out of the four properties which are the mechanical, chemical and most importantly the environmental properties, as to comply with the sustainable manufacturing practice of these frames.

The hydrostatic pressure indifference point underestimates orthostatic redistribution of blood in humans.

PubMed

Petersen, L G; Carlsen, J F; Nielsen, M B; Damgaard, M; Secher, N H

2014-04-01

The hydrostatic indifference point (HIP; where venous pressure is unaffected by posture) is located at the level of the diaphragm and is believed to indicate the orthostatic redistribution of blood, but it remains unknown whether HIP coincides with the indifference point for blood volume (VIP). During graded (± 20°) head-up (HUT) and head-down tilt (HDT) in 12 male volunteers, we determined HIP from central venous pressure and VIP from redistribution of both blood, using ultrasound imaging of the inferior caval vein (VIPui), and fluid volume, by regional electrical admittance (VIPadm). Furthermore, we evaluated whether inflation of medical antishock trousers (to 70 mmHg) affected HIP and VIP. Leaving cardiovascular variables unaffected by tilt, HIP was located 7 ± 4 cm (mean ± SD) below the 4th intercostal space (IC-4) during HUT and was similar (7 ± 3 cm) during HDT and higher (P < 0.0001) than both VIPui (HUT: 22 ± 16 cm; HDT: 13 ± 7 cm) and VIPadm (HUT: 29 ± 9 cm; HDT: 20 ± 9 cm below IC-4). During HUT antishock trousers elevated both HIP and VIPui [to 3 ± 5 cm (P = 0.028) and 17 ± 7 cm below IC-4 (P = 0.051), respectively], while VIPadm remained unaffected. By simultaneous recording of pressure and filling of the inferior caval vein as well as fluid distribution, we found HIP located corresponding to the diaphragm while VIP was placed low in the abdomen, and that medical antishock trousers elevated both HIP and VIP. The low indifference point for volume shows that the gravitational influence on distribution of blood is more profound than indicated by the indifference point for venous pressure.

State-of-the-Art Highly Insulating Window Frames - Research and Market Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gustavsen, Arild; Jelle, Bjorn Petter; Arasteh, Dariush

2007-01-01

This document reports the findings of a market and research review related to state-of-the-art highly insulating window frames. The market review focuses on window frames that satisfy the Passivhaus requirements (window U-value less or equal to 0.8 W/m{sup 2}K ), while other examples are also given in order to show the variety of materials and solutions that may be used for constructing window frames with a low thermal transmittance (U-value). The market search shows that several combinations of materials are used in order to obtain window frames with a low U-value. The most common insulating material seems to be Polyurethanemore » (PUR), which is used together with most of the common structural materials such as wood, aluminum, and PVC. The frame research review also shows examples of window frames developed in order to increase the energy efficiency of the frames and the glazings which the frames are to be used together with. The authors find that two main tracks are used in searching for better solutions. The first one is to minimize the heat losses through the frame itself. The result is that conductive materials are replaced by highly thermal insulating materials and air cavities. The other option is to reduce the window frame area to a minimum, which is done by focusing on the net energy gain by the entire window (frame, spacer and glazing). Literature shows that a window with a higher U-value may give a net energy gain to a building that is higher than a window with a smaller U-value. The net energy gain is calculated by subtracting the transmission losses through the window from the solar energy passing through the windows. The net energy gain depends on frame versus glazing area, solar factor, solar irradiance, calculation period and U-value. The frame research review also discusses heat transfer modeling issues related to window frames. Thermal performance increasing measures, surface modeling, and frame cavity modeling are among the topics discussed. The review shows that the current knowledge gives the basis for improving the calculation procedures in the calculation standards. At the same time it is room for improvement within some areas, e.g. to fully understand the natural convection effects inside irregular vertical frame cavities (jambs) and ventilated frame cavities.« less

Utility indifference pricing of insurance catastrophe derivatives.

PubMed

Eichler, Andreas; Leobacher, Gunther; Szölgyenyi, Michaela

2017-01-01

We propose a model for an insurance loss index and the claims process of a single insurance company holding a fraction of the total number of contracts that captures both ordinary losses and losses due to catastrophes. In this model we price a catastrophe derivative by the method of utility indifference pricing. The associated stochastic optimization problem is treated by techniques for piecewise deterministic Markov processes. A numerical study illustrates our results.

Soviet Style in War.

DTIC Science & Technology

1982-04-01

distant it is from a reality corrupted by indifference. Indecisiveness :3 If one avoids indifference, one may still not arrive at action, for one may...react without delay to all remarks of his superiors. However, in reality this is not the case. From higher levels orders come down, plans for...the final stage of the offensive of [the Voronezh and South- western] Fronts in the winter of 1943... there were virtually no powerful spearheads to

Effects of Reinforcer Probability, Delay, and Response Requirements on the Choices of Rats and Pigeons: Possible Species Differences

ERIC Educational Resources Information Center

Mazur, James E.

2005-01-01

In Experiment 1 with rats, a left lever press led to a 5-s delay and then a possible reinforcer. A right lever press led to an adjusting delay and then a certain reinforcer. This delay was adjusted over trials to estimate an indifference point, or a delay at which the two alternatives were chosen about equally often. Indifference points increased…

Visiting Santa: a supplemental view.

PubMed

Trinkaus, John

2008-12-01

Four recent informal successive yearly enquiries of the emotions of 1,050 children (total) immediately before their visit with Santa Claus at a shopping mall suggested that about 80% displayed facial expressions, judged by an observer, as indicating indifference. To investigate possible change in emotions of children immediately after their visit with Santa, this study was conducted in 2007. Of the 280 exiting children observed, about 60% appeared to be indifferent.

A principled approach to setting optimal diagnostic thresholds: where ROC and indifference curves meet.

PubMed

Irwin, R John; Irwin, Timothy C

2011-06-01

Making clinical decisions on the basis of diagnostic tests is an essential feature of medical practice and the choice of the decision threshold is therefore crucial. A test's optimal diagnostic threshold is the threshold that maximizes expected utility. It is given by the product of the prior odds of a disease and a measure of the importance of the diagnostic test's sensitivity relative to its specificity. Choosing this threshold is the same as choosing the point on the Receiver Operating Characteristic (ROC) curve whose slope equals this product. We contend that a test's likelihood ratio is the canonical decision variable and contrast diagnostic thresholds based on likelihood ratio with two popular rules of thumb for choosing a threshold. The two rules are appealing because they have clear graphical interpretations, but they yield optimal thresholds only in special cases. The optimal rule can be given similar appeal by presenting indifference curves, each of which shows a set of equally good combinations of sensitivity and specificity. The indifference curve is tangent to the ROC curve at the optimal threshold. Whereas ROC curves show what is feasible, indifference curves show what is desirable. Together they show what should be chosen. Copyright © 2010 European Federation of Internal Medicine. Published by Elsevier B.V. All rights reserved.

Sweat collection capsule

NASA Technical Reports Server (NTRS)

Greenleaf, J. E.; Delaplaine, R. W. (Inventor)

1980-01-01

A sweat collection capsule permitting quantitative collection of sweat is described. The device consists of a frame held immobile on the skin, a closure secured to the frame and absorbent material located next to the skin in a cavity formed by the frame and the closure. The absorbent material may be removed from the device by removing the closure from the frame while the frame is held immobile on the skin.

Method of laminating structural members

NASA Technical Reports Server (NTRS)

Heier, W. C. (Inventor)

1974-01-01

A laminate is obtained by providing a lightweight core material, such as a honeycombed plastic or metal, within the cavity defined by an annular mold cavity frame. Face sheets, which are to be bonded to the core material, are provided on opposite sides of the frame and extend over the frame, thus sealing the core material in the cavity. An adhesive is provided between the core material and the face sheets and the combined thickness of the core material and adhesive is a close fit within the opposed face sheets. A gas tight seal, such as an O-ring gasket, is provided between the frame and the face sheet members to form a gas tight cavity between the face sheet members and the frame. External heat and pressure are used to bond the face sheets to the core material. Gas pressure is introduced into the sealed cavity to minimize out-gasing of the adhesive.

Monolithic LTCC seal frame and lid

DOEpatents

Krueger, Daniel S.; Peterson, Kenneth A.; Stockdale, Dave; Duncan, James Brent; Riggs, Bristen

2016-06-21

A method for forming a monolithic seal frame and lid for use with a substrate and electronic circuitry comprises the steps of forming a mandrel from a ceramic and glass based material, forming a seal frame and lid block from a ceramic and glass based material, creating a seal frame and lid by forming a compartment and a plurality of sidewalls in the seal frame and lid block, placing the seal frame and lid on the mandrel such that the mandrel fits within the compartment, and cofiring the seal frame and lid block.

Using Prospect Theory to Investigate Decision-Making Bias Within an Information Security Context

DTIC Science & Technology

2005-12-01

risk was acceptable, 5 when to the CA the risk was so bad...Population Proportion Lower Tail: Risk Averse (A) Coded as 0. Risk Seeking (B) Coded as 1. Ho (indifferent in risk behavior): p = . 5 Ha ( risk averse...Averse (A) Coded as 0. Risk Seeking (B) Coded as 1. Ho (indifferent in risk behavior): p = . 5 Ha ( risk averse thus significantly below . 5 ): p < . 5

Measurements of the frame acoustic properties of porous and granular materials

NASA Astrophysics Data System (ADS)

Park, Junhong

2005-12-01

For porous and granular materials, the dynamic characteristics of the solid component (frame) are important design factors that significantly affect the material's acoustic properties. The primary goal of this study was to present an experimental method for measuring the vibration characteristics of this frame. The experimental setup was designed to induce controlled vibration of the solid component while minimizing the influence from coupling between vibrations of the fluid and the solid component. The Biot theory was used to verify this assumption, taking the two dilatational wave propagations and interactions into account. The experimental method was applied to measure the dynamic properties of glass spheres, lightweight microspheres, acoustic foams, and fiberglass. A continuous variation of the frame vibration characteristics with frequency similar to that of typical viscoelastic materials was measured. The vibration amplitude had minimal effects on the dynamic characteristics of the porous material compared to those of the granular material. For the granular material, materials comprised of larger particles and those under larger vibration amplitudes exhibited lower frame wave speeds and larger decay rates.

Effect of salt on the response of birds to sucrose

USGS Publications Warehouse

Rogers, J.G.; Maller, O.

1973-01-01

The preference of male red-winged blackbirds for solutions of sucrose and sucrose with 0.03 M sodium chloride was tested, using a two-bottle choice test. Preliminary experiments demonstrated that the birds were indifferent to 0.03 M NaCl in water. Both control and experimental animals exhibited indifference to the solutions at the lowest concentration and aversion at the highest. The data suggest that the added sodium chloride makes the sucrose stimulus more discriminable.

Characteristics of adolescents who expressed indifference or no interest towards body art

PubMed Central

2010-01-01

Background This study examines the underlying characteristics of adolescents attending Italian secondary school who expressed indifference towards or no interest at all in body art. Methods A convenience sample of 4,277 secondary school students from the North Eastern Italy were surveyed with a self-reported questionnaire collecting extensive socio-demographic information. Multivariable logistic regression analysis was employed to investigate the characteristics of those who were not interested or indifferent towards piercing and tattoo, reporting adjusted Odds Ratios (aOR) with a 95% confidence interval (CI). Results Prevalence of tattoo was 6%, whereas body piercing was 20%; 66% (= 558/840) of those with a piercing were underage (<18 years of age), the equivalent for tattoo being 62% (= 159/258). 166 individuals reported having both piercing and tattoo and 152 of these (92% = 152/166) were <18 years of age. The factors found to be predominately higher in those indifferent or who did not indicate interest in body art were: higher school year, increasing father's education and a greater perception of the associated health risks. Discussion Proactive health education campaigns by school educators and family physicians should focus on adolescents of less educated fathers and pupils less aware of the health risks associated with body art. In this respect junior secondary school students can be regarded as the ideal target of such campaigns. PMID:20942946

Application of advanced material systems to composite frame elements

NASA Technical Reports Server (NTRS)

Llorente, Steven; Minguet, Pierre; Fay, Russell; Medwin, Steven

1992-01-01

A three phase program has been conducted to investigate DuPont's Long Discontinuous Fiber (LDF) composites. Additional tests were conducted to compare LDF composites against toughened thermosets and a baseline thermoset system. Results have shown that the LDF AS4/PEKK offers improved interlaminar (flange bending) strength with little reduction in mechanical properties due to the discontinuous nature of the fibers. In the third phase, a series of AS4/PEKK LDF C-section curved frames (representing a typical rotorcraft light frame) were designed, manufactured and tested. Specimen reconsolidation after 'stretch forming' and frame thickness were found to be key factors in this light frame's performance. A finite element model was constructed to correlate frame test results with expected strain levels determined from material property tests. Adequately reconsolidated frames performed well and failed at strain levels at or above baseline thermoset material test strains. Finally a cost study was conducted which has shown that the use of LDF for this frame would result in a significant cost savings, for moderate to large lot sizes compared with the hand lay-up of a thermoset frame.

Material isolation enclosure

DOEpatents

Martell, Calvin J.; Dahlby, Joel W.; Gallimore, Bradford F.; Comer, Bob E.; Stone, Water A.; Carlson, David O.

1993-01-01

An enclosure similar to a glovebox for isolating materials from the atmosphere, yet allowing a technician to manipulate the materials and also apparatus which is located inside the enclosure. A portion of a wall of the enclosure is comprised of at least one flexible curtain. An opening defined by a frame is provided for the technician to insert his hands and forearms into the enclosure. The frame is movable in one plane, so that the technician has access to substantially all of the working interior of the enclosure. As the frame is moved by the technician, while he accomplishes work inside the enclosure, the curtain moves such that the only opening through the enclosure wall is the frame. In a preferred embodiment, where a negative pressure is maintained inside the enclosure, the frame is comprised of airfoils so that turbulence is reduced, thereby enhancing material retention within the box.

Material isolation enclosure

DOEpatents

Martell, C.J.; Dahlby, J.W.; Gallimore, B.F.; Comer, B.E.; Stone, W.A.; Carlson, D.O.

1993-04-27

An enclosure is described, similar to a glove box, for isolating materials from the atmosphere, yet allowing a technician to manipulate the materials and also apparatus which is located inside the enclosure. A portion of a wall of the enclosure is comprised of at least one flexible curtain. An opening defined by a frame is provided for the technician to insert his hands and forearms into the enclosure. The frame is movable in one plane, so that the technician has access to substantially all of the working interior of the enclosure. As the frame is moved by the technician, while he accomplishes work inside the enclosure, the curtain moves such that the only opening through the enclosure wall is the frame. In a preferred embodiment, where a negative pressure is maintained inside the enclosure, the frame is comprised of airfoils so that turbulence is reduced, thereby enhancing material retention within the box.

Measurements of Acoustic Properties of Porous and Granular Materials and Application to Vibration Control

NASA Technical Reports Server (NTRS)

Park, Junhong; Palumbo, Daniel L.

2004-01-01

For application of porous and granular materials to vibro-acoustic controls, a finite dynamic strength of the solid component (frame) is an important design factor. The primary goal of this study was to investigate structural vibration damping through this frame wave propagation for various poroelastic materials. A measurement method to investigate the vibration characteristics of the frame was proposed. The measured properties were found to follow closely the characteristics of the viscoelastic materials - the dynamic modulus increased with frequency and the degree of the frequency dependence was determined by its loss factor. The dynamic stiffness of hollow cylindrical beams containing porous and granular materials as damping treatment was measured also. The data were used to extract the damping materials characteristics using the Rayleigh-Ritz method. The results suggested that the acoustic structure interaction between the frame and the structure enhances the dissipation of the vibration energy significantly.

Physical cognition: birds learn the structural efficacy of nest material

PubMed Central

Bailey, Ida E.; Morgan, Kate V.; Bertin, Marion; Meddle, Simone L.; Healy, Susan D.

2014-01-01

It is generally assumed that birds’ choice of structurally suitable materials for nest building is genetically predetermined. Here, we tested that assumption by investigating whether experience affected male zebra finches’ (Taeniopygia guttata) choice of nest material. After a short period of building with relatively flexible string, birds preferred to build with stiffer string while those that had experienced a stiffer string were indifferent to string type. After building a complete nest with either string type, however, all birds increased their preference for stiff string. The stiffer string appeared to be the more effective building material as birds required fewer pieces of stiffer than flexible string to build a roofed nest. For birds that raised chicks successfully, there was no association between the material they used to build their nest and the type they subsequently preferred. Birds’ material preference reflected neither the preference of their father nor of their siblings but juvenile experience of either string type increased their preference for stiffer string. Our results represent two important advances: (i) birds choose nest material based on the structural properties of the material; (ii) nest material preference is not entirely genetically predetermined as both the type and amount of experience influences birds’ choices. PMID:24741011

Physical cognition: birds learn the structural efficacy of nest material.

PubMed

Bailey, Ida E; Morgan, Kate V; Bertin, Marion; Meddle, Simone L; Healy, Susan D

2014-06-07

It is generally assumed that birds' choice of structurally suitable materials for nest building is genetically predetermined. Here, we tested that assumption by investigating whether experience affected male zebra finches' (Taeniopygia guttata) choice of nest material. After a short period of building with relatively flexible string, birds preferred to build with stiffer string while those that had experienced a stiffer string were indifferent to string type. After building a complete nest with either string type, however, all birds increased their preference for stiff string. The stiffer string appeared to be the more effective building material as birds required fewer pieces of stiffer than flexible string to build a roofed nest. For birds that raised chicks successfully, there was no association between the material they used to build their nest and the type they subsequently preferred. Birds' material preference reflected neither the preference of their father nor of their siblings but juvenile experience of either string type increased their preference for stiffer string. Our results represent two important advances: (i) birds choose nest material based on the structural properties of the material; (ii) nest material preference is not entirely genetically predetermined as both the type and amount of experience influences birds' choices.

An empirical approach to symmetry and probability

NASA Astrophysics Data System (ADS)

North, Jill

We often rely on symmetries to infer outcomes' probabilities, as when we infer that each side of a fair coin is equally likely to come up on a given toss. Why are these inferences successful? I argue against answering this question with an a priori indifference principle. Reasons to reject such a principle are familiar, yet instructive. They point to a new, empirical explanation for the success of our probabilistic predictions. This has implications for indifference reasoning generally. I argue that a priori symmetries need never constrain our probability attributions, even for initial credences.

Inorganic spark chamber frame and method of making the same

NASA Technical Reports Server (NTRS)

Heslin, T. M. (Inventor)

1982-01-01

A spark chamber frame, manufactured using only inorganic materials is described. The spark chamber frame includes a plurality of beams formed from inorganic material, such as ceramic or glass, and are connected together at ends with inorganic bonding material having substantially the same thermal expansion as the beam material. A plurality of wires formed from an inorganic composition are positioned between opposed beams so that the wires are uniformly spaced and form a grid. A plurality of hold down straps are formed of inorganic material such as ceramic or glass having substantially the same chemical and thermal properties as the beam material. Hold down straps overlie wires extending over the beams and are bonded thereto with inorganic bonding material.

Morphing continuum theory for turbulence: Theory, computation, and visualization.

PubMed

Chen, James

2017-10-01

A high order morphing continuum theory (MCT) is introduced to model highly compressible turbulence. The theory is formulated under the rigorous framework of rational continuum mechanics. A set of linear constitutive equations and balance laws are deduced and presented from the Coleman-Noll procedure and Onsager's reciprocal relations. The governing equations are then arranged in conservation form and solved through the finite volume method with a second-order Lax-Friedrichs scheme for shock preservation. A numerical example of transonic flow over a three-dimensional bump is presented using MCT and the finite volume method. The comparison shows that MCT-based direct numerical simulation (DNS) provides a better prediction than Navier-Stokes (NS)-based DNS with less than 10% of the mesh number when compared with experiments. A MCT-based and frame-indifferent Q criterion is also derived to show the coherent eddy structure of the downstream turbulence in the numerical example. It should be emphasized that unlike the NS-based Q criterion, the MCT-based Q criterion is objective without the limitation of Galilean invariance.

Subliminal perception of complex visual stimuli.

PubMed

Ionescu, Mihai Radu

2016-01-01

Rationale: Unconscious perception of various sensory modalities is an active subject of research though its function and effect on behavior is uncertain. Objective: The present study tried to assess if unconscious visual perception could occur with more complex visual stimuli than previously utilized. Methods and Results: Videos containing slideshows of indifferent complex images with interspersed frames of interest of various durations were presented to 24 healthy volunteers. The perception of the stimulus was evaluated with a forced-choice questionnaire while awareness was quantified by self-assessment with a modified awareness scale annexed to each question with 4 categories of awareness. At values of 16.66 ms of stimulus duration, conscious awareness was not possible and answers regarding the stimulus were random. At 50 ms, nonrandom answers were coupled with no self-reported awareness suggesting unconscious perception of the stimulus. At larger durations of stimulus presentation, significantly correct answers were coupled with a certain conscious awareness. Discussion: At values of 50 ms, unconscious perception is possible even with complex visual stimuli. Further studies are recommended with a focus on a range of interest of stimulus duration between 50 to 16.66 ms.

[Profiles of youths in modern society and health risks].

PubMed

del Rey Calero, J

2001-01-01

The youngsters are clearly conditioned by the society where they live, though they may feel apart. These youngsters have benefited from more educative and material resources than generations before, and their vital and social itinerary will depend, in great part, from the behaviours and attitudes acquired during adolescence and youth. They have not been formed in austerity and determination. They mainly value the near and the present. Courses of action more determined by the emotional than by the rational. While tolerant, they have selfish traits with self-contradictions between end- and instrumental values (effort, dedication, compromise), and certain indifference for the religion. Finally, they are demonstrate solidarity in specific situations.

Monkeys choose as if maximizing utility compatible with basic principles of revealed preference theory

PubMed Central

Pastor-Bernier, Alexandre; Plott, Charles R.; Schultz, Wolfram

2017-01-01

Revealed preference theory provides axiomatic tools for assessing whether individuals make observable choices “as if” they are maximizing an underlying utility function. The theory evokes a tradeoff between goods whereby individuals improve themselves by trading one good for another good to obtain the best combination. Preferences revealed in these choices are modeled as curves of equal choice (indifference curves) and reflect an underlying process of optimization. These notions have far-reaching applications in consumer choice theory and impact the welfare of human and animal populations. However, they lack the empirical implementation in animals that would be required to establish a common biological basis. In a design using basic features of revealed preference theory, we measured in rhesus monkeys the frequency of repeated choices between bundles of two liquids. For various liquids, the animals’ choices were compatible with the notion of giving up a quantity of one good to gain one unit of another good while maintaining choice indifference, thereby implementing the concept of marginal rate of substitution. The indifference maps consisted of nonoverlapping, linear, convex, and occasionally concave curves with typically negative, but also sometimes positive, slopes depending on bundle composition. Out-of-sample predictions using homothetic polynomials validated the indifference curves. The animals’ preferences were internally consistent in satisfying transitivity. Change of option set size demonstrated choice optimality and satisfied the Weak Axiom of Revealed Preference (WARP). These data are consistent with a version of revealed preference theory in which preferences are stochastic; the monkeys behaved “as if” they had well-structured preferences and maximized utility. PMID:28202727

Monkeys choose as if maximizing utility compatible with basic principles of revealed preference theory.

PubMed

Pastor-Bernier, Alexandre; Plott, Charles R; Schultz, Wolfram

2017-03-07

Revealed preference theory provides axiomatic tools for assessing whether individuals make observable choices "as if" they are maximizing an underlying utility function. The theory evokes a tradeoff between goods whereby individuals improve themselves by trading one good for another good to obtain the best combination. Preferences revealed in these choices are modeled as curves of equal choice (indifference curves) and reflect an underlying process of optimization. These notions have far-reaching applications in consumer choice theory and impact the welfare of human and animal populations. However, they lack the empirical implementation in animals that would be required to establish a common biological basis. In a design using basic features of revealed preference theory, we measured in rhesus monkeys the frequency of repeated choices between bundles of two liquids. For various liquids, the animals' choices were compatible with the notion of giving up a quantity of one good to gain one unit of another good while maintaining choice indifference, thereby implementing the concept of marginal rate of substitution. The indifference maps consisted of nonoverlapping, linear, convex, and occasionally concave curves with typically negative, but also sometimes positive, slopes depending on bundle composition. Out-of-sample predictions using homothetic polynomials validated the indifference curves. The animals' preferences were internally consistent in satisfying transitivity. Change of option set size demonstrated choice optimality and satisfied the Weak Axiom of Revealed Preference (WARP). These data are consistent with a version of revealed preference theory in which preferences are stochastic; the monkeys behaved "as if" they had well-structured preferences and maximized utility.

29 CFR 1926.953 - Material handling.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Material handling. (a) Unloading. Prior to unloading steel, poles, cross arms and similar material, the.... During framing operations, employees shall not work under a pole or a structure suspended by a crane, A-frame or similar equipment unless the pole or structure is adequately supported. (g) Attaching the load...

29 CFR 1926.953 - Material handling.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Material handling. (a) Unloading. Prior to unloading steel, poles, cross arms and similar material, the.... During framing operations, employees shall not work under a pole or a structure suspended by a crane, A-frame or similar equipment unless the pole or structure is adequately supported. (g) Attaching the load...

29 CFR 1926.953 - Material handling.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Material handling. (a) Unloading. Prior to unloading steel, poles, cross arms and similar material, the.... During framing operations, employees shall not work under a pole or a structure suspended by a crane, A-frame or similar equipment unless the pole or structure is adequately supported. (g) Attaching the load...

Taste dysfunction in BTBR mice due to a mutation of Itpr3, the inositol triphosphate receptor 3 gene

PubMed Central

Ellis, Hillary T.

2013-01-01

The BTBR T+ tf/J (BTBR) mouse strain is indifferent to exemplars of sweet, Polycose, umami, bitter, and calcium tastes, which share in common transduction by G protein-coupled receptors (GPCRs). To investigate the genetic basis for this taste dysfunction, we screened 610 BTBR × NZW/LacJ F2 hybrids, identified a potent QTL on chromosome 17, and isolated this in a congenic strain. Mice carrying the BTBR/BTBR haplotype in the 0.8-Mb (21-gene) congenic region were indifferent to sweet, Polycose, umami, bitter, and calcium tastes. To assess the contribution of a likely causative culprit, Itpr3, the inositol triphosphate receptor 3 gene, we produced and tested Itpr3 knockout mice. These were also indifferent to GPCR-mediated taste compounds. Sequencing the BTBR form of Itpr3 revealed a unique 12 bp deletion in Exon 23 (Chr 17: 27238069; Build 37). We conclude that a spontaneous mutation of Itpr3 in a progenitor of the BTBR strain produced a heretofore unrecognized dysfunction of GPCR-mediated taste transduction. PMID:23859941

An alternative approach to calculating Area-Under-the-Curve (AUC) in delay discounting research.

PubMed

Borges, Allison M; Kuang, Jinyi; Milhorn, Hannah; Yi, Richard

2016-09-01

Applied to delay discounting data, Area-Under-the-Curve (AUC) provides an atheoretical index of the rate of delay discounting. The conventional method of calculating AUC, by summing the areas of the trapezoids formed by successive delay-indifference point pairings, does not account for the fact that most delay discounting tasks scale delay pseudoexponentially, that is, time intervals between delays typically get larger as delays get longer. This results in a disproportionate contribution of indifference points at long delays to the total AUC, with minimal contribution from indifference points at short delays. We propose two modifications that correct for this imbalance via a base-10 logarithmic transformation and an ordinal scaling transformation of delays. These newly proposed indices of discounting, AUClog d and AUCor d, address the limitation of AUC while preserving a primary strength (remaining atheoretical). Re-examination of previously published data provides empirical support for both AUClog d and AUCor d . Thus, we believe theoretical and empirical arguments favor these methods as the preferred atheoretical indices of delay discounting. © 2016 Society for the Experimental Analysis of Behavior.

The Neural Correlates of Desire

PubMed Central

Kawabata, Hideaki; Zeki, Semir

2008-01-01

In an event-related fMRI study, we scanned eighteen normal human subjects while they viewed three categories of pictures (events, objects and persons) which they classified according to desirability (desirable, indifferent or undesirable). Each category produced activity in a distinct part of the visual brain, thus reflecting its functional specialization. We used conjunction analysis to learn whether there is a brain area which is always active when a desirable picture is viewed, regardless of the category to which it belongs. The conjunction analysis of the contrast desirable > undesirable revealed activity in the superior orbito-frontal cortex. This activity bore a positive linear relationship to the declared level of desirability. The conjunction analysis of desirable > indifferent revealed activity in the mid-cingulate cortex and in the anterior cingulate cortex. In the former, activity was greater for desirable and undesirable stimuli than for stimuli classed as indifferent. Other conjunction analyses produced no significant effects. These results show that categorizing any stimulus according to its desirability activates three different brain areas: the superior orbito-frontal, the mid-cingulate, and the anterior cingulate cortices. PMID:18728753

46 CFR 116.433 - Windows and air ports in fire control boundaries.

Code of Federal Regulations, 2011 CFR

2011-10-01

... fitted with frames of steel or equivalent material. Glazing beads or angles of steel or equivalent... event of a fire if: (1) Where a steel frame is used, it is not arranged to retain the glass in place; or (2) A frame of aluminum or other material with low melting point is used. (d) A window or air port...

40 CFR 260.34 - Standards and criteria for non-waste determinations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... reasonable time frame and ensure that the hazardous secondary material will not be abandoned (for example... statistical or from a health and environmental risk perspective than would otherwise be released by the... hazardous secondary material in a reasonable time frame and ensure that the hazardous secondary material...

29 CFR 1926.953 - Material handling.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Material handling. (a) Unloading. Prior to unloading steel, poles, cross arms and similar material, the... stored in temporary containers other than those required in § 1926.152, such as pillow tanks. (f) Framing. During framing operations, employees shall not work under a pole or a structure suspended by a crane, A...

29 CFR 1926.953 - Material handling.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Material handling. (a) Unloading. Prior to unloading steel, poles, cross arms and similar material, the... stored in temporary containers other than those required in § 1926.152, such as pillow tanks. (f) Framing. During framing operations, employees shall not work under a pole or a structure suspended by a crane, A...

Method and apparatus for improving the performance of light emitting diodes

DOEpatents

Lowery, Christopher H.; McElfresh, David K.; Burchet, Steve; Adolf, Douglas B.; Martin, James

1996-01-01

A method for increasing the resistance of a light emitting diode and other semiconductor devices to extremes of temperature is disclosed. During the manufacture of the light emitting diode, a liquid coating is applied to the light emitting die after the die has been placed in its lead frame. After the liquid coating has been placed on the die and its lead frames, a thermosetting encapsulant material is placed over the coating. The operation that cures the thermosetting material leaves the coating liquid intact. As the die and the encapsulant expand and contract at different rates with respect to changes in temperature, and as in known light emitting diodes the encapsulating material adheres to the die and lead frames, this liquid coating reduces the stresses that these different rates of expansion and contraction normally cause by eliminating the adherence of the encapsulating material to the die and frame.

Page turning system

NASA Technical Reports Server (NTRS)

Kerley, James J. (Inventor); Eklund, Wayne D. (Inventor)

1992-01-01

A device for holding reading materials for use by readers without arm mobility is presented. The device is adapted to hold the reading materials in position for reading with the pages displayed to enable turning by use of a rubber tipped stick that is held in the mouth and has a pair of rectangular frames. The frames are for holding and positioning the reading materials opened in reading posture with the pages displayed at a substantially unobstructed sighting position for reading. The pair of rectangular frames are connected to one another by a hinge so the angle between the frames may be varied thereby varying the inclination of the reading material. A pair of bent spring mounted wires for holding opposing pages of the reading material open for reading without substantial visual interference of the pages is mounted to the base. The wires are also adjustable to the thickness of the reading material and have a variable friction adjustment. This enables the force of the wires against the pages to be varied and permits the reader to manipulate the pages with the stick.

The process of nanostructuring of metal (iron) matrix in composite materials for directional control of the mechanical properties.

PubMed

Zemtsova, Elena; Yurchuk, Denis; Smirnov, Vladimir

2014-01-01

We justified theoretical and experimental bases of synthesis of new class of highly nanostructured composite nanomaterials based on metal matrix with titanium carbide nanowires as dispersed phase. A new combined method for obtaining of metal iron-based composite materials comprising the powder metallurgy processes and the surface design of the dispersed phase is considered. The following stages of material synthesis are investigated: (1) preparation of porous metal matrix; (2) surface structuring of the porous metal matrix by TiC nanowires; (3) pressing and sintering to give solid metal composite nanostructured materials based on iron with TiC nanostructures with size 1-50 nm. This material can be represented as the material type "frame in the frame" that represents iron metal frame reinforcing the frame of different chemical compositions based on TiC. Study of material functional properties showed that the mechanical properties of composite materials based on iron with TiC dispersed phase despite the presence of residual porosity are comparable to the properties of the best grades of steel containing expensive dopants and obtained by molding. This will solve the problem of developing a new generation of nanostructured metal (iron-based) materials with improved mechanical properties for the different areas of technology.

Effect of methylprednisolone on bone mineral density in rats with ovariectomy-induced bone loss and suppressed endogenous adrenaline levels by metyrosine

PubMed Central

Yilmaz, Mehmet; Isaoglu, Unal; Uslu, Turan; Yildirim, Kadir; Seven, Bedri; Akcay, Fatih; Hacimuftuoglu, Ahmet

2013-01-01

Objectives: In this study, effect of methylprednisolone on bone mineral density (BMD) was investigated in rats with overiectomy induced bone lose and suppressed endogenous adrenalin levels, and compared to alendronate. Materials and Methods: Severity of bone loss in the examined material (femur bones) was evaluated by BMD measurement. Results: The group with the highest BMD value was metyrosinemetyrosine + methylprednisolone combination (0.151 g/cm2), while that with the lowest BMD was methylprednisolone (0.123 g/cm2). Alendronate was effective only when used alone in ovariectomized rats (0.144 g/cm2), but not when used in combination with methylprednisolone (0.124 g/cm2). In the ovariectomized rat group which received only metyrosine, BMD value was statistically indifferent from ovariectomized control group. Conclusions: Methylprednisolone protected bone loss in rats with suppressed adrenaline levels because of metyrosinemetyrosine. PMID:24014908

Resource availability at Taurus-Littrow

NASA Technical Reports Server (NTRS)

Haskin, Larry A.; Colson, R. O.

1992-01-01

Early lunar technologies will probably use a common lunar material as ore. They will be robust to minor fluctuations in feedstock composition and will not require appreciable feedstock beneficiation such as rock grinding or mineral concentration. Technologies using unprocessed soil and indifferent to its composition will have the advantage. Nevertheless, the size and grade of the ore body must be confirmed for even the most indiscriminate process. Simple uses such as heaping unprocessed lunar soil for thermal insulation or radiation shielding onto a habitat require that we know the depth of the regolith, the size distributions of its soils, the locations of large boulders, and the ease of excavation. Costs of detailed site surveys trade against restrictions on site selection and conservative engineering design to accommodate unknown conditions of a poorly explored site. Given the above considerations, we consider briefly some abundant lunar materials, their proposed uses, and technologies for their preparation, with particular attention to the Taurus-Littrow site.

Development of Methods of Preparing Materials for Teaching Machines: Professional Paper 29-68.

ERIC Educational Resources Information Center

Skinner, B. F.; Zook, Lola M., Ed.

In the preparation of 12-inch disc teaching machine materials for elementary college courses, a preliminary analysis of subject matter and required skills precedes sequential framing. The programer must assess the beginning level of student competence and frame questions to supply new material until the proper response stands alone. Statements for…

C-621/15 - W and Others v Sanofi Pasteur: An Example of Judicial Distortion and Indifference to Science.

PubMed

Smillie, Laura R; Eccleston-Turner, Mark R; Cooper, Sarah L

2018-02-01

This case commentary examines the CJEU's recent decision in C-621/15 W and Others v Sanofi Pasteur MSD SNC [2017] ECR I. This commentary critically examines the decision through the lens of the cultural conflict between law and science. We argue that the CJEU's decision reflects both a distortion of scientific knowledge and an improper indifference to the legitimate methods by which scientific knowledge is generated in the context of vaccines. These judicial approaches may, the authors argue, inadvertently fuel the vaccine scepticism that is growing across the developed world, and in particular in Europe.

10 CFR 710.35 - Time frames.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Time frames. 710.35 Section 710.35 Energy DEPARTMENT OF... Matter or Special Nuclear Material Miscellaneous § 710.35 Time frames. Statements of time established for processing aspects of a case under this subpart are the agency's desired time frames in implementing the...

10 CFR 710.35 - Time frames.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Time frames. 710.35 Section 710.35 Energy DEPARTMENT OF... Matter or Special Nuclear Material Miscellaneous § 710.35 Time frames. Statements of time established for processing aspects of a case under this subpart are the agency's desired time frames in implementing the...

10 CFR 710.35 - Time frames.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Time frames. 710.35 Section 710.35 Energy DEPARTMENT OF... Matter or Special Nuclear Material Miscellaneous § 710.35 Time frames. Statements of time established for processing aspects of a case under this subpart are the agency's desired time frames in implementing the...

10 CFR 710.35 - Time frames.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Time frames. 710.35 Section 710.35 Energy DEPARTMENT OF... Matter or Special Nuclear Material Miscellaneous § 710.35 Time frames. Statements of time established for processing aspects of a case under this subpart are the agency's desired time frames in implementing the...

Solar energy panel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hyman, M.

1980-03-04

A light-weight, low-cost and high efficiency solar panel includes a light-weight rectangular wood frame which surrounds and houses a copper absorber plate. A pair of spaced glazings, formed from plastic film materials, are disposed above the absorber to define a pair of enclosed air spaces. The lower glazing is capable of withstanding high temperatures and the upper glazing material is capable of providing good weather resistance. The material of the upper glazing extends fully about the frame to protect the entire frame from weathering. Insulation is provided beneath the absorber plate. The frame rests on top of a bottom sheetmore » of insulative foam plastic which is wrapped in a plastic envelope. The surrounding film of the outer glazing is bonded securely to the envelope to encase the entire panel within a protective sealed envelope of weather-resistant plastic film.« less

Quiet Clean Short-haul Experimental Engine (QCSEE) composite fan frame design report

NASA Technical Reports Server (NTRS)

Mitchell, S. C.

1978-01-01

An advanced composite frame which is flight-weight and integrates the functions of several structures was developed for the over the wing (OTW) engine and for the under the wing (UTW) engine. The composite material system selected as the basic material for the frame is Type AS graphite fiber in a Hercules 3501 epoxy resin matrix. The frame was analyzed using a finite element digital computer program. This program was used in an iterative fashion to arrive at practical thicknesses and ply orientations to achieve a final design that met all strength and stiffness requirements for critical conditions. Using this information, the detail design of each of the individual parts of the frame was completed and released. On the basis of these designs, the required tooling was designed to fabricate the various component parts of the frame. To verify the structural integrity of the critical joint areas, a full-scale test was conducted on the frame before engine testing. The testing of the frame established critical spring constants and subjected the frame to three critical load cases. The successful static load test was followed by 153 and 58 hours respectively of successful running on the UTW and OTW engines.

Synergistic activity of biocides and antibiotics on resistant bacteria from organically produced foods.

PubMed

Fernández Fuentes, Miguel Angel; Abriouel, Hikmate; Gadea, Rebeca; Pérez Pulido, Rubén; Gálvez, Antonio; Ortega, Elena

2014-10-01

Synergism between biocides and antibiotics was investigated in 20 biocide and antibiotic-resistant bacterial strains that were previously isolated from organically produced foods, according to their antimicrobial resistance profiles. Most of the antibiotic/biocide combinations yielded synergistic interactions, reducing the inhibitory concentrations of biocides and antibiotics by 4- to 16-fold. Among enterococci, synergism with biocides was detected for amoxicillin (AM), cefuroxime (CX), erythromycin (EM), ciprofloxacin (CP), and trimethoprim/sulphametoxazol (T/S). Among staphylococci, interactions were synergistic (AM) and either synergistic or indifferent (CX and EM, depending on biocide). Among the three methicillin-resistant Staphylococcus aureus clinical strains included in the study, the combinations of methicillin and triclosan or hexachlorophene acted synergistically in all strains, but interactions were either synergistic or indifferent for the other biocides, depending on the strain. All combinations tested were synergistic for Lactobacillus (AM, CX, EM, and CP) and Micrococcus (AM, EM). In Salmonella, interactions were indifferent (AM, CX, EM, and CP) or synergistic (T/S). Synergism with biocides was also detected in Klebsiella isolates (AM, CX, and T/S), Enterobacter sp. (AM, CX, EM, and T/S), Pantoea (AM, CX, EM, CP, and T/S), and Chryseobacterium sp. (EM). These results suggest that combinations of biocides and antibiotics may open new possibilities to combat antimicrobial resistance.

Role of splanchnic constriction in governing the hemodynamic responses to gravitational stress in conscious dogs

PubMed Central

Wong, Brett J.

2011-01-01

Octreotide is a somatostatin analog that constricts the splanchnic circulation, thereby improving orthostatic tolerance. We tested the hypotheses that octreotide improves orthostatic tolerance by 1)increasing cardiac filling (right atrial) pressure via reductions in vascular capacity; 2) by causing an upward (i.e., cranial) shift of the hydrostatic indifferent point; and 3) by increasing arterial pressure via a reduction in total vascular conductance. Studies were carried out in acepromazine-sedated, hexamethonium-treated atrioventricular-blocked conscious dogs lightly restrained in lateral recumbency. Beat-by-beat cardiac output was held constant via computer-controlled ventricular pacing at rest and during 30 s of 30° head-up tilt. Octreotide (1.5 μg/kg iv) raised right atrial pressure by 0.5 mmHg and raised mean arterial pressure by 11 mmHg by reducing total vascular conductance (all P < 0.05). Right atrial pressure fell by a similar amount in response to tilting before and after octreotide, thus there was no difference in location of the hydrostatic indifferent point. These data indicate that octreotide improves orthostatic tolerance by decreasing total vascular conductance and by increasing cardiac filling pressure via a reduction in unstressed vascular volume and not by eliciting a cranial shift of the location of the hydrostatic indifferent point. PMID:21512154

Polarized Couples in Therapy: Recognizing Indifference as the Opposite of Love.

PubMed

Abbasi, Irum Saeed; Alghamdi, Nawal G

2017-01-02

How can a couple "fall in love" and then subsequently "stumble out of love"? For centuries, this question has perplexed partners, researchers, and therapists alike. Unlike falling out of love, which may be a long-term gradual decline in love, falling in love may occur without much deliberation like the famous "love at first sight." During a developing love relationship, couples are more susceptible to ignoring a myriad of factors that will eventually influence their relationship. These ignored personal and general factors become increasingly conspicuous after the relationship is established. When facing relationship difficulties, the presence or absence of mutual love and intimacy steers the couple's relationship toward continuity or termination. Emotional indifference (which is the opposite of love) diminishes love and care; the terms marital disaffection and romantic disengagement are used synonymously to represent emotional indifference in couples. Marital disaffection is one of the central concerns of couples entering therapy. Nevertheless, spouses may enter therapy with divergent goals that may be polar opposites. Therefore, treatment of polarized or different agenda couples is challenging because disaffected spouses may be seeking counseling to break the bond at a safe venue, while their partners may still be obliviously hoping for the rebirth of their lost love. This article reviews marital disaffection/romantic disengagement and discusses counseling options for polarized couples.

Free vibrations of thin-walled semicircular graphite-epoxy composite frames

NASA Technical Reports Server (NTRS)

Carden, Huey D.; Noor, Ahmed K.; Peters, Jeanne M.

1990-01-01

A detailed study is made of the effects of variations in lamination and material parameters of thin walled composite frames on their vibrational characteristics. The structures considered are semicircular thin walled frames with I and J sections. The flanges and webs of the frames are modeled by using 2-D shell and plate finite elements. A mixed formulation is used with the fundamental unknowns consisting of both the generalized displacements and stress resultants in the frame. The frequencies and modes predicted by the 2-D finite element model are compared with those obtained from experiments, as well as with the predictions of a non-dimensional thin walled beam finite element model. A detailed study is made of the sensitivity of the vibrational response to variations in the fiber orientation, material properties of the individual layers, and boundary conditions.

Free vibrations of thin-walled semicircular graphite-epoxy composite frames

NASA Technical Reports Server (NTRS)

Noor, Ahmed K.; Carden, Huey D.; Peters, Jeanne M.

1990-01-01

A detailed study is made of the effects of variations in lamination and material parameters of thin walled composite frames on their vibrational characteristics. The structures considered are semicircular thin walled frames with I and J sections. The flanges and webs of the frames are modelled by using 2-D shell and plate finite elements. A mixed formulation is used with the fundamental unknowns consisting of both the generalized displacements and stress resultants in the frames. The frequencies and modes predicted by the 2-D finite element model are compared with those obtained from experiments, as well as with the predictions of a 1-D thin walled beam finite element model. A detailed study is made of the sensitivity of the vibrational response to variations in the fiber orientation, material properties of the individual layers, and boundary conditions.

Electrically insulating and sealing frame

DOEpatents

Guthrie, Robin J.

1983-11-08

A combination gas seal and electrical insulator having a closed frame shape interconnects a fuel cell stack and a reactant gas plenum of a fuel cell generator. The frame can be of rectangular shape including at least one slidable spline connection in each side to permit expansion or contraction consistent with that of the walls of the gas plenum and fuel cell stack. The slidable spline connections in the frame sides minimizes lateral movement between the frame side members and sealing material interposed between the frame and the fuel cell stack or between the frame and the reactant gas plenum.

Finite element analysis on the bending condition of truck frame before and after opening

NASA Astrophysics Data System (ADS)

Cai, Kaiwu; Cheng, Wei; Lu, Jifu

2018-05-01

Based on the design parameters of a truck frame, the structure design and model of the truck frame are built. Based on the finite element theory, the load, the type of fatigue and the material parameters of the frame are combined with the semi-trailer. Using finite element analysis software, after a truck frame hole in bending condition for the finite element analysis of comparison, through the analysis found that the truck frame hole under bending condition can meet the strength requirements are very helpful for improving the design of the truck frame.

Characterization and recovery of polymers from mobile phone scrap.

PubMed

Kasper, Angela C; Bernardes, Andréa M; Veit, Hugo M

2011-07-01

Electronic scrap is part of a universally wide range of obsolete, defective, or used materials that need to be disposed of or recycled in an ecologically friendly manner. The present study focused on the polymers present in mobile phone scrap. In mobile phones, polymers are found in frames and in printed circuit boards (PCBs). The frames are mainly made of polymers whereas PCBs use a variety of material (polymers, ceramics, and metals) which makes recycling more difficult. As a first step, mobile phones were collected, separated by manufacturer/model, and weighed, and the principal polymer types identified. The frames and PCBs were processed separately. The metals in PCBs were separated out by an electrostatic separation process. The resulting polymeric material was identified and mixed with the polymers of frames to fabricate the samples. Two types of samples were made: one with polymeric frames, and the other with a mixture of frames and polymeric fraction from the PCBs. Both kinds of sample were fabricated by injection moulding. The samples were evaluated by mechanical tests (tensile, impact, and hardness) to verify the feasibility of recycling the polymers present in mobile phone scrap. The results demonstrated the technical viability of recovering polymers using mechanical processing followed by an injection process.

24 CFR 3280.808 - Wiring methods and materials.

Code of Federal Regulations, 2010 CFR

2010-04-01

... frames where the cable or armor would be less than 11/2 inches from the inside or outside surface of the studs when the wall covering materials are in contact with the studs. Steel plates on each side of the... used when closely routed against frames, and equipment enclosures. (l) The cables or conductors shall...

On the sensitivity analysis of porous material models

NASA Astrophysics Data System (ADS)

Ouisse, Morvan; Ichchou, Mohamed; Chedly, Slaheddine; Collet, Manuel

2012-11-01

Porous materials are used in many vibroacoustic applications. Different available models describe their behaviors according to materials' intrinsic characteristics. For instance, in the case of porous material with rigid frame, and according to the Champoux-Allard model, five parameters are employed. In this paper, an investigation about this model sensitivity to parameters according to frequency is conducted. Sobol and FAST algorithms are used for sensitivity analysis. A strong parametric frequency dependent hierarchy is shown. Sensitivity investigations confirm that resistivity is the most influent parameter when acoustic absorption and surface impedance of porous materials with rigid frame are considered. The analysis is first performed on a wide category of porous materials, and then restricted to a polyurethane foam analysis in order to illustrate the impact of the reduction of the design space. In a second part, a sensitivity analysis is performed using the Biot-Allard model with nine parameters including mechanical effects of the frame and conclusions are drawn through numerical simulations.

Seismic response of reinforced concrete frames at different damage levels

NASA Astrophysics Data System (ADS)

Morales-González, Merangeli; Vidot-Vega, Aidcer L.

2017-03-01

Performance-based seismic engineering is focused on the definition of limit states to represent different levels of damage, which can be described by material strains, drifts, displacements or even changes in dissipating properties and stiffness of the structure. This study presents a research plan to evaluate the behavior of reinforced concrete (RC) moment resistant frames at different performance levels established by the ASCE 41-06 seismic rehabilitation code. Sixteen RC plane moment frames with different span-to-depth ratios and three 3D RC frames were analyzed to evaluate their seismic behavior at different damage levels established by the ASCE 41-06. For each span-to-depth ratio, four different beam longitudinal reinforcement steel ratios were used that varied from 0.85 to 2.5% for the 2D frames. Nonlinear time history analyses of the frames were performed using scaled ground motions. The impact of different span-to-depth and reinforcement ratios on the damage levels was evaluated. Material strains, rotations and seismic hysteretic energy changes at different damage levels were studied.

Apparatus for supporting contactors used in extracting nuclear materials from liquids

DOEpatents

Leonard, Ralph A.; Frank, Robert C.

1991-01-01

Apparatus is provided for supporting one or more contactor stages used to remove radioactive materials from aqueous solutions. The contactor stages include a housing having an internal rotor, a motor secured to the top of the housing for rotating the rotor, and a drain in the bottom of the housing. The support apparatus includes two or more vertical members each secured to a ground support that is horizontal and perpendicular to the frame member, and a horizontally disposed frame member. The frame member may be any suitable shape, but is preferably a rectangular tube having substantially flat, spaced top and bottom surfaces separated by substantially vertical side surfaces. The top and bottom surfaces each have an opening through which the contactor housing is secured so that the motor is above the frame and the drain is below the frame during use.

Investigation of nonlinear motion simulator washout schemes

NASA Technical Reports Server (NTRS)

Riedel, S. A.; Hofmann, L. G.

1978-01-01

An overview is presented of some of the promising washout schemes which have been devised. The four schemes presented fall into two basic configurations; crossfeed and crossproduct. Various nonlinear modifications further differentiate the four schemes. One nonlinear scheme is discussed in detail. This washout scheme takes advantage of subliminal motions to speed up simulator cab centering. It exploits so-called perceptual indifference thresholds to center the simulator cab at a faster rate whenever the input to the simulator is below the perceptual indifference level. The effect is to reduce the angular and translational simulation motion by comparison with that for the linear washout case. Finally, the conclusions and implications for further research in the area of nonlinear washout filters are presented.

Message framing and color combination in the perception of medical information.

PubMed

Chien, Yu-Hung

2011-04-01

A 2 x 2 between-subjects design was used to examine the effects of message framing (gain vs loss) and color combination (red background with white characters vs white background with black characters) on 120 university students' perception of materials promoting the H1N1 flu vaccine and their willingness to receive the vaccine after they had read the materials. Each participant completed a 6-item questionnaire, and the results of an analysis of variance showed that participants rated vaccine information presented through loss-framed messages as having greater interest and leading to greater understanding. Loss-framed messages presented on a white background with black characters significantly increased the willingness of the participants to receive the vaccine.

Analysis of 3D face forms for proper sizing and CAD of spectacle frames.

PubMed

Kouchi, Makiko; Mochimaru, Masaaki

2004-11-01

Three-dimensional morphological variations in the human face were analysed using digital models of the human face, and the usefulness of such analysis in designing industrial products was demonstrated by validating spectacle frame designs based on an original sizing system developed based on the analysis. A normalized model of the three-dimensional face form was made for each of 56 young adult Japanese males. The morphological distances between subjects were defined, and subjects were divided into four groups based on analysis of the distance matrix. A prototype spectacle frame was designed for the average form of each of the four groups. Tightening force of the prototype frames was adjusted using the materialized average forms with soft material placed at the nasal bridge and side of the head. Four prototype frames as well as a conventional frame were evaluated using sensory evaluation and physical measurement of the pressure and slip in 38 young adult male subjects. For each of the 38 subjects, prototype frames were ranked according to the morphological similarity of the subjects and the average form of the four groups: the frame designed for the average form of the group most similar to the subject was #1, the frame designed for the average form of the next most similar group was #2, and so on. For the groups with smaller or narrower faces, new frame #1 was most preferred and had the best overall fit, smallest slip sensation and largest pressure sensation. The groups with larger or wider faces preferred tighter frames than new frame #1, because they were concerned that the frames might slip, although the frames did not. Most of the subjects habitually wore spectacles, and the reason that groups with larger or wider faces preferred tighter frames was thought to be that they were accustomed to tighter fitting frames.

Integrated optimization of nonlinear R/C frames with reliability constraints

NASA Technical Reports Server (NTRS)

Soeiro, Alfredo; Hoit, Marc

1989-01-01

A structural optimization algorithm was researched including global displacements as decision variables. The algorithm was applied to planar reinforced concrete frames with nonlinear material behavior submitted to static loading. The flexural performance of the elements was evaluated as a function of the actual stress-strain diagrams of the materials. Formation of rotational hinges with strain hardening were allowed and the equilibrium constraints were updated accordingly. The adequacy of the frames was guaranteed by imposing as constraints required reliability indices for the members, maximum global displacements for the structure and a maximum system probability of failure.

Directory of wood-framed building deconstruction and reused wood building materials companies, 2004

Treesearch

Robert H. Falk; G. Bradley Guy

2004-01-01

This is a directory of companies involved in wood-framed building deconstruction, dismantling and reused building materials, with an emphasis on those that use, resell, and/or re-manufacture salvaged wood. Companies in this directory range in scope from those that carryout targeted building removals, such as historic barns, strictly for the purpose of harvesting the...

Removable, hermetically-sealing, filter attachment system for hostile environments

DOEpatents

Mayfield, Glenn L [Richland, WA

1983-01-01

A removable and reusable filter attachment system. A filter medium is fixed o, and surrounded by, a filter frame having a coaxial, longitudinally extending, annular rim. The rim engages an annular groove which surrounds the opening of a filter housing. The annular groove contains a fusible material and a heating mechanism for melting the fusible material. Upon resolidifying, the fusible material forms a hermetic bond with the rim and groove. Remelting allows detachment and replacement of the filter frame.

Elliptically Framed Tip-Tilt Mirror Optimized for Stellar Tracking

DTIC Science & Technology

2015-01-01

a rotating frame. We used the same materials as the existing tracker; however, light-weighted both the aluminum frame and Zerodur ® mirror . We...as the existing tracker; however, light-weighted both the aluminum frame and Zerodur mirror . We generated a computer-aided design model, converted it...components include an aluminum yoke and ring, glass Zerodur ®4 mirror , piezoelectric (PZT) actuators and stainless steel flexure pivot bearings5. Fig. 1

Modular shield

DOEpatents

Snyder, Keith W.

2002-01-01

A modular system for containing projectiles has a sheet of material including at least a polycarbonate layer held by a metal frame having a straight frame member corresponding to each straight edge of the sheet. Each frame member has a U-shaped shield channel covering and holding a straight edge of the sheet and an adjacent U-shaped clamp channel rigidly held against the shield channel. A flexible gasket separates each sheet edge from its respective shield channel; and each frame member is fastened to each adjacent frame member only by clamps extending between adjacent clamp channels.

Endangered Honeybee

ERIC Educational Resources Information Center

Bourne, Russell

1975-01-01

Because of pesticides, the disappearance of open farmland, chemical fertilizers, and our own indifference and ignorance, the number of United States honeybee colonies has been reduced an average of 2 percent per year. (BT)

The Process of Nanostructuring of Metal (Iron) Matrix in Composite Materials for Directional Control of the Mechanical Properties

PubMed Central

Zemtsova, Elena

2014-01-01

We justified theoretical and experimental bases of synthesis of new class of highly nanostructured composite nanomaterials based on metal matrix with titanium carbide nanowires as dispersed phase. A new combined method for obtaining of metal iron-based composite materials comprising the powder metallurgy processes and the surface design of the dispersed phase is considered. The following stages of material synthesis are investigated: (1) preparation of porous metal matrix; (2) surface structuring of the porous metal matrix by TiC nanowires; (3) pressing and sintering to give solid metal composite nanostructured materials based on iron with TiC nanostructures with size 1–50 nm. This material can be represented as the material type “frame in the frame” that represents iron metal frame reinforcing the frame of different chemical compositions based on TiC. Study of material functional properties showed that the mechanical properties of composite materials based on iron with TiC dispersed phase despite the presence of residual porosity are comparable to the properties of the best grades of steel containing expensive dopants and obtained by molding. This will solve the problem of developing a new generation of nanostructured metal (iron-based) materials with improved mechanical properties for the different areas of technology. PMID:24695459

On deformation of complex continuum immersed in a plane space

NASA Astrophysics Data System (ADS)

Kovalev, V. A.; Murashkin, E. V.; Radayev, Y. N.

2018-05-01

The present paper is devoted to mathematical modelling of complex continua deformations considered as immersed in an external plane space. The complex continuum is defined as a differential manifold supplied with metrics induced by the external space. A systematic derivation of strain tensors by notion of isometric immersion of the complex continuum into a plane space of a higher dimension is proposed. Problem of establishing complete systems of irreducible objective strain and extrastrain tensors for complex continuum immersed in an external plane space is resolved. The solution to the problem is obtained by methods of the field theory and the theory of rational algebraic invariants. Strain tensors of the complex continuum are derived as irreducible algebraic invariants of contravariant vectors of the external space emerging as functional arguments in the complex continuum action density. Present analysis is restricted to rational algebraic invariants. Completeness of the considered systems of rational algebraic invariants is established for micropolar elastic continua. Rational syzygies for non-quadratic invariants are discussed. Objective strain tensors (indifferent to frame rotations in the external plane space) for micropolar continuum are alternatively obtained by properly combining multipliers of polar decompositions of deformation and extra-deformation gradients. The latter is realized only for continua immersed in a plane space of the equal mathematical dimension.

Evolution of accesses to information on breast cancer and screening on the Brazilian National Cancer Institute website: an exploratory study.

PubMed

Vasconcellos-Silva, Paulo Roberto; Sormunen, Taina; Craftman, Åsa Gransjön

2018-04-01

Delays in diagnosis due to low Breast Cancer awareness are widespread in Brazil maybe owing to ineffective strategies to raise attention on early diagnosis. As a proxy of collective interest in BC screanning (BCS) we studied the monthly accesses to BC and BCS webpages in INCA's website along 48 months. A log analyzer built a time serie (2006-2009) of BC and BCS monthly means, which oscilations were studied by analysis of variance (ANOVA). We found significant increasing accesses to BC and transient "attention peaks". Enlargement in BC/BCS differences along all period were caused by increasing accesses to BC and decreasing/minor/stable oscillations to SBC pages. These results are consistent with previous reports on increasing interest to BC contrasting with indifference on BCS. In the context of an exploratory study, we discussed some aspects: weakness of a "prevention culture"; lack of confidence in health system and screening programs; "celebrity effect" in the context of media framing; collective perception of risks heightened by perception of social vulnerability. Findings suggest that culture-tailored communication strategies would be necessary to inform Brazilian people about BCS. Future research is needed to study social perceptions and constructions on BC topics.

Avoiding humiliations in the clinical encounter

PubMed Central

Malterud, Kirsti; Hollnagel, Hanne

2007-01-01

Objectives To explore potentials for avoiding humiliations in clinical encounters, especially those that are unintended and unrecognized by the doctor. Furthermore, to examine theoretical foundations of degrading behaviour and identify some concepts that can be used to understand such behaviour in the cultural context of medicine. Finally, these concepts are used to build a model for the clinician in order to prevent humiliation of the patient. Theoretical frame of reference Empirical studies document experiences of humiliation among patients when they see their doctor. Philosophical and sociological analysis can be used to explain the dynamics of unintended degrading behaviour between human beings. Skjervheim, Vetlesen, and Bauman have identified the role of objectivism, distantiation, and indifference in the dynamics of evil acts, pointing to the rules of the cultural system, rather than accusing the individual of bad behaviour. Examining the professional role of the doctor, parallel traits embedded in the medical culture are demonstrated. According to Vetlesen, emotional awareness is necessary for moral perception, which again is necessary for moral performance. Conclusion A better balance between emotions and rationality is needed to avoid humiliations in the clinical encounter. The Awareness Model is presented as a strategy for clinical practice and education, emphasizing the role of the doctor's own emotions. Potentials and pitfalls are discussed. PMID:17497482

Apparatus for measuring tensile and compressive properties of solid materials at cryogenic temperatures

DOEpatents

Gonczy, John D.; Markley, Finley W.; McCaw, William R.; Niemann, Ralph C.

1992-01-01

An apparatus for evaluating the tensile and compressive properties of material samples at very low or cryogenic temperatures employs a stationary frame and a dewar mounted below the frame. A pair of coaxial cylindrical tubes extend downward towards the bottom of the dewar. A compressive or tensile load is generated hydraulically and is transmitted by the inner tube to the material sample. The material sample is located near the bottom of the dewar in a liquid refrigerant bath. The apparatus employs a displacement measuring device, such as a linear variable differential transformer, to measure the deformation of the material sample relative to the amount of compressive or tensile force applied to the sample.

Pushing x-ray photon correlation spectroscopy beyond the continuous frame rate limit

DOE PAGES

Dufresne, Eric M.; Narayanan, Suresh; Sandy, Alec R.; ...

2016-01-06

We demonstrate delayed-frame X-ray Photon Correlation Spectroscopy with 120 microsecond time resolution, limited only by sample scattering rates, with a prototype Pixel-array detector capable of taking two image frames separated by 153 ns or less. Although the overall frame rate is currently limited to about 4 frame pairs per second, we easily measured millisecond correlation functions. In conclusion, this technology, coupled to the use of brighter synchrotrons such as Petra III or the NSLS-II should enable X-ray Photon Correlation Spectroscopy on microsecond time scales on a wider variety of materials.

46 CFR 189.01-5 - Posting.

Code of Federal Regulations, 2010 CFR

2010-10-01

... framed under glass or other transparent material and posted in a conspicuous place where it will be most likely to be observed. On other vessels such as barges, where the framing of the certificate under glass...

Adult Education for Women.

ERIC Educational Resources Information Center

Nagappa, T. R.

1980-01-01

Apathy, indifference, and neglect has characterized adult education for women in India. The National Adult Education Programme must focus attention and funding on women if the extremely low percentage of female literacy is to be improved. (SK)

Psychoanalysis Today-A Pseudoscience? A Critique of the Arbitrary Nature of Psychoanalytic Theories and Practice.

PubMed

Zepf, Siegfried

2018-01-01

The article centers on psychoanalysts' indifferent attitude to the mutually exclusivity of theoretical conceptualizations and the ensuing technical rules for treatment. In the author's view this indifference is due to psychoanalysts being business people for whom the exchange value of their service is essentially of greater interest than its utility value, which latter is only of interest as a means of realizing the former. The author argues that, as a consequence of the disparate coexisting conceptualizations being treated as equally valid, psychoanalysis becomes a science without truth, that is, a pseudoscience, and demonstrates that all attempts to appropriate the epithet ornans "scientific" to psychoanalysis by linking its concepts to findings in areas beyond its conceptual field have failed. Finally, he offers a proposal of how the situation might be altered.

Profiles of Adolescents' Perceptions of Democratic Classroom Climate and Students' Influence: The Effect of School and Community Contexts.

PubMed

Reichert, Frank; Chen, Jiaxin; Torney-Purta, Judith

2018-06-01

Students' learning experiences and outcomes are shaped by school and classroom contexts. Many studies have shown how an open, democratic classroom climate relates to learning in the citizenship domain and helps nurture active and engaged citizens. However, little research has been undertaken to look at how such a favorable classroom climate may work together with broader school factors. The current study examines data from 14,292 Nordic eighth graders (51% female) who had participated in the International Civic and Citizenship Education Study in 2009, as well as contextual data from 5,657 teachers and 618 principals. Latent class analysis identifies profiles of students' perceptions of school context, which are further examined with respect to the contextual correlates at the school level using two-level fixed effects multinomial regression analyses. Five distinct student profiles are identified and labeled "alienated", "indifferent", "activist", "debater", and "communitarian". Compared to indifferent students, debaters and activists appear more frequently at schools with relatively few social problems; being in the communitarian group is associated with aspects of the wider community. Furthermore, being in one of these three groups (and not in the indifferent group) is more likely when teachers act as role models by engaging in school governance. The results are discussed within the framework of ecological assets and developmental niches for emergent participatory citizenship. The implications are that adults at school could enhance multiple contexts that shape adolescents' developmental niches to nurture active and informed citizens for democracies.

Airborne sound transmission loss characteristics of wood-frame construction

NASA Astrophysics Data System (ADS)

Rudder, F. F., Jr.

1985-03-01

This report summarizes the available data on the airborne sound transmission loss properties of wood-frame construction and evaluates the methods for predicting the airborne sound transmission loss. The first part of the report comprises a summary of sound transmission loss data for wood-frame interior walls and floor-ceiling construction. Data bases describing the sound transmission loss characteristics of other building components, such as windows and doors, are discussed. The second part of the report presents the prediction of the sound transmission loss of wood-frame construction. Appropriate calculation methods are described both for single-panel and for double-panel construction with sound absorption material in the cavity. With available methods, single-panel construction and double-panel construction with the panels connected by studs may be adequately characterized. Technical appendices are included that summarize laboratory measurements, compare measurement with theory, describe details of the prediction methods, and present sound transmission loss data for common building materials.

Informative frame detection from wireless capsule video endoscopic images

NASA Astrophysics Data System (ADS)

Bashar, Md. Khayrul; Mori, Kensaku; Suenaga, Yasuhito; Kitasaka, Takayuki; Mekada, Yoshito

2008-03-01

Wireless capsule endoscopy (WCE) is a new clinical technology permitting the visualization of the small bowel, the most difficult segment of the digestive tract. The major drawback of this technology is the high amount of time for video diagnosis. In this study, we propose a method for informative frame detection by isolating useless frames that are substantially covered by turbid fluids or their contamination with other materials, e.g., faecal, semi-processed or unabsorbed foods etc. Such materials and fluids present a wide range of colors, from brown to yellow, and/or bubble-like texture patterns. The detection scheme, therefore, consists of two stages: highly contaminated non-bubbled (HCN) frame detection and significantly bubbled (SB) frame detection. Local color moments in the Ohta color space are used to characterize HCN frames, which are isolated by the Support Vector Machine (SVM) classifier in Stage-1. The rest of the frames go to the Stage-2, where Laguerre gauss Circular Harmonic Functions (LG-CHFs) extract the characteristics of the bubble-structures in a multi-resolution framework. An automatic segmentation method is designed to extract the bubbled regions based on local absolute energies of the CHF responses, derived from the grayscale version of the original color image. Final detection of the informative frames is obtained by using threshold operation on the extracted regions. An experiment with 20,558 frames from the three videos shows the excellent average detection accuracy (96.75%) by the proposed method, when compared with the Gabor based- (74.29%) and discrete wavelet based features (62.21%).

Swainsonine-induced lysosomal storage disease in goats caused by the ingestion of Sida rodrigoi Monteiro in North-western Argentina.

PubMed

Micheloud, Juan Francisco; Marin, Raúl; Colque-Caro, Luis Adrián; Martínez, Olga Gladys; Gardner, Dale; Gimeno, Eduardo Juan

2017-03-15

There are numerous poisonous plants that can induce intralysosomal accumulation of glycoproteins and neurologic syndromes. Here we describe for the first time, a disease caused by ingesting Sida rodrigoi Monteiro in goats in North-western Argentina. The animals showed weight loss, indifference to the environment, unsteady gait and ataxia. Histopathologic studies showed vacuolization in cells of various organs, mainly in the CNS. The material deposited in the cells was positive for LCA (Lens culinaris agglutinin), WGA (Triticum vulgaris agglutinin), sWGA (succinyl-Triticum vulgaris agglutinin) and Con-A (Concanavalia ensiformis agglutinin) lectins. Finally, toxic levels of swansonine were identified in the plant. The present investigation allowed to recognize S. rodrigoi Monteiro poisoning as a plant induced α-mannosidosis. Copyright © 2017 Elsevier Ltd. All rights reserved.

Thermal barrier skylight

DOE Office of Scientific and Technical Information (OSTI.GOV)

Couture, P.A.

1984-08-21

The skylight may be of the domed-type or flat-type and of single or double glass (acrylic or other transparent or translucent plastic) construction. The skylight fits within an opening in a roof or the like and has a peripheral base that may be constructed of a metal material such as aluminum, and which is fixed to the roof about the opening. The base comprises inner and outer base frames separated by a thermal break, a peripheral curb frame disposed over the base, and a retainer for securing the skylight cover over the curb frame. The curb frame or support framemore » has inner and outer sections connected by a heat insulating thermal barrier. The curb frame is constructed by welding at the corners of the support frame but eliminating the welding in the area of the thermal barrier thus alleviating a caulking operation at the top and the bottom of the curb frame. The base frame and curb frame have therebetween a compliant sealing means extending contiguously about and overlying the base frame and for sealing between the base frame and support frame.« less

Apparatus for measuring tensile and compressive properties of solid materials at cryogenic temperatures

DOEpatents

Gonczy, J.D.; Markley, F.W.; McCaw, W.R.; Niemann, R.C.

1992-04-21

An apparatus for evaluating the tensile and compressive properties of material samples at very low or cryogenic temperatures employs a stationary frame and a dewar mounted below the frame. A pair of coaxial cylindrical tubes extend downward towards the bottom of the dewar. A compressive or tensile load is generated hydraulically and is transmitted by the inner tube to the material sample. The material sample is located near the bottom of the dewar in a liquid refrigerant bath. The apparatus employs a displacement measuring device, such as a linear variable differential transformer, to measure the deformation of the material sample relative to the amount of compressive or tensile force applied to the sample. 7 figs.

Coping with Unexpected Events: Depression and Trauma

MedlinePlus

... indifference Inability to concentrate Recurring memories or bad dreams about the event Social withdrawal, isolation, strained personal ... Continually re-experiencing the event (“flashbacks”) through images, dreams, and/or a sense of re-living the ...

Child Labor: Global Offensive.

ERIC Educational Resources Information Center

Sutcliffe, Peter; And Others

1993-01-01

Includes "An Evil Unbearable to the Human Heart" (Sutcliffe); "Fighting Indifference and Inaction" (Fromont); "Concerted International Action for Children"; "New Shelter for Street Kids of Ankara" (Fromont); "IPEC's International Program for Elimination of Child Labor Challenge to Brazilian…

Shakedown Tests for Refurbished and Upgraded Frames and Initiation of Alloy 709 Creep Rupture Tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Hong; Moser, Jeremy L.; Hawkins, Charles S.

This report describes the shakedown tests conducted on the upgraded frames, and initiation of creep rupture tests on refurbished frames. SS316H, a reference material for Alloy 709, was used in shakedown tests, and the tests were conducted at 816 degree C under three stress levels to accumulate 1% creep strain. 1/4” gage diameter specimen design was used. The creep rupture tests on Alloy 709 were initiated at 600 degree C under 330 MPa to target 1,500 h rupture time. 12 specimens with 3/8” gage diameter were prepared from the materials with 6 heat treatment conditions, 2 from each. The requiredmore » mechanical load under 330MPa was calculated to be 5,286 lb for the 3/8” gage diameter specimen. Among the ART frames, 7 frames are equipped with 10,000 lb load cell including #5 to 8 and #88 to 90, and can be used. 7 tests were thus started in this stage of project, and remaining 5 will be continued whenever any of the 7 tests is completed.« less

Design concepts for low-cost composite turbofan engine frame

NASA Technical Reports Server (NTRS)

Mitchell, S. C.; Stoffer, L. J.

1980-01-01

Design concepts for low cost, lightweight composite engine frames were applied to the design requirements for the frame of a commercial, high bypass engine. Four alternative composite frame design concepts identified which consisted of generic type components and subcomponents that could be adapted to use in different locations in the engine and the different engine sizes. A variety of materials and manufacturing methods were projected with a goal for the lowest number of parts at the lowest possible cost. After a preliminary evaluation of all four frame concepts, two designs were selected for an extended design and evaluation which narrowed the final selection down to one frame that was significantly lower in cost and slighty lighter than the other frame. An implementation plan for this lowest cost frame is projected for future development and includes prospects for reducing its weight with proposed unproven, innovative fabrication techniques.

Design concepts for low-cost composite engine frames

NASA Technical Reports Server (NTRS)

Chamis, C. C.

1983-01-01

Design concepts for low-cost, lightweight composite engine frames were applied to the design requirements for the frame of commercial, high-bypass turbine engines. The concepts consist of generic-type components and subcomponents that could be adapted for use in different locations in the engine and to different engine sizes. A variety of materials and manufacturing methods were assessed with a goal of having the lowest number of parts possible at the lowest possible cost. The evaluation of the design concepts resulted in the identification of a hybrid composite frame which would weigh about 70 percent of the state-of-the-art metal frame and cost would be about 60 percent.

Promoting participation in physical activity using framed messages: an application of prospect theory.

PubMed

Latimer, Amy E; Rench, Tara A; Rivers, Susan E; Katulak, Nicole A; Materese, Stephanie A; Cadmus, Lisa; Hicks, Althea; Keany Hodorowski, Julie; Salovey, Peter

2008-11-01

Messages designed to motivate participation in physical activity usually emphasize the benefits of physical activity (gain-framed) as well as the costs of inactivity (loss-framed). The framing implications of prospect theory suggest that the effectiveness of these messages could be enhanced by providing gain-framed information only. We compared the effectiveness of gain-, loss-, and mixed-framed messages for promoting moderate to vigorous physical activity. Randomized trial. Sedentary, healthy callers to the US National Cancer Institute's Cancer Information Service (N=322) received gain-, loss-, or mixed-framed messages on three occasions (baseline, Week 1, and Week 5). Social cognitive variables and self-reported physical activity were assessed at baseline, Week 2, and Week 9. Separate regression analyses were conducted to examine message effects at each assessment point. At Week 2, gain- and mixed-framed messages resulted in stronger intentions and greater self-efficacy than loss-framed messages. At Week 9, gain-framed messages resulted in greater physical activity participation than loss- or mixed-framed messages. Social cognitive variables at Week 2 did not mediate the Week 9 framing effects on physical activity participation. Using gain-framed messages exclusively may be a means of increasing the efficacy of physical activity materials.

An evolutionary game model for behavioral gambit of loyalists: Global awareness and risk-aversion

NASA Astrophysics Data System (ADS)

Alfinito, E.; Barra, A.; Beccaria, M.; Fachechi, A.; Macorini, G.

2018-02-01

We study the phase diagram of a minority game where three classes of agents are present. Two types of agents play a risk-loving game that we model by the standard Snowdrift Game. The behaviour of the third type of agents is coded by indifference with respect to the game at all: their dynamics is designed to account for risk-aversion as an innovative behavioral gambit. From this point of view, the choice of this solitary strategy is enhanced when innovation starts, while is depressed when it becomes the majority option. This implies that the payoff matrix of the game becomes dependent on the global awareness of the agents measured by the relevance of the population of the indifferent players. The resulting dynamics is nontrivial with different kinds of phase transition depending on a few model parameters. The phase diagram is studied on regular as well as complex networks.

X-chromosome monosomy in an infertile female llama.

PubMed

Hinrichs, K; Horin, S E; Buoen, L C; Zhang, T Q; Ruth, G R

1997-05-15

A 3-year-old female llama was examined because of a history of infertility and apparent anovulation. The llama had indifferent behavior when penned with a male, but eventually would assume sternal recumbency for breeding. On examination, the llama was underweight and small in stature. The uterine horns and ovaries could not be identified during palpation or ultrasonography per rectum, and the cervix was dilated when examined with a speculum. Chromosomal preparations of lymphocytes and skin fibroblasts were performed; all cells examined had a 73, X karyotype (X-chromosome monosomy). To our knowledge, this is the first report of a chromosomal anomaly in a llama. Signs seen in this llama were similar to those seen in mares with X-chromosome monosomy. This condition should be considered in the differential diagnosis of infertility in llamas that fail to ovulate, especially if other abnormalities such as indifferent sexual behavior and short stature are present.

Public health officials and MECs should be held liable for harm caused to patients through incompetence, indifference, maladministration or negligence regarding the availability of hospital equipment.

PubMed

McQuoid-Mason, David Jan

2016-06-17

There have been several reports of state hospitals not having functional equipment such as radiological equipment. Where these are due to incompetence, Indifference, maladministration or negligence by the public officials concerned, they may be held personally liable for the resulting harm to patients. However, the courts have often observed that where the State has been sued vicariously for the wrongs of public officials, it has not obtained reimbursement from the offending official. It has therefore been suggested that irresponsible public servants should be sued in their personal capacity (in addition to the State), to prevent taxpayers always having to pay for their misdeeds. If an individual public official cannot afford to pay all the damages awarded, the injured party can recover the balance from the State by citing it as a vicarious joint wrongdoer.

Feelings of attachment to siblings and well-being in later life.

PubMed

Cicirelli, V G

1989-06-01

On the basis of an adult model of sibling attachment, I hypothesized that the well-being of older persons depends on their perception of the closeness of the sibling bond, on their perception of any disruption of that bond, and on the sex combination of the siblings being considered. In all, 83 persons, aged 61 to 91 years, were interviewed about their relationships with each of their living siblings. They rated their feelings of closeness, conflict or rivalry, and indifference to the sibling. A measure of depression was used as the indicator of well-being. Separate correlational analyses were carried out for the four sex combinations of siblings. Closeness of the bond to a sister (by both men and women) was related to less depression. Also, women's perceptions of conflict and indifference in their relationships with sisters were related to increased depression. Findings are interpreted in terms of attachment theory and sex role expectations.

Human rabies deaths in Africa: breaking the cycle of indifference.

PubMed

Dodet, Betty; Tejiokem, Mathurin C; Aguemon, Abdou-Rahman; Bourhy, Hervé

2015-01-01

The current outbreak of Ebola virus disease has mobilized the international community against this deadly disease. However, rabies, another deadly disease, is greatly affecting the African continent, with an estimated 25 000 deaths every year. And yet, the disease can be prevented by a vaccine, if necessary with immunoglobulin, even when administered after exposure to the rabies virus. Rabies victims die because of neglect and ignorance, because they are not aware of these life-saving biologicals, or because they cannot access them or do not have the money to pay for them. Breaking the cycle of indifference of rabies deaths in humans in Africa should be a priority of governments, international organizations and all stakeholders involved. © The Author 2014. Published by Oxford University Press on behalf of Royal Society of Tropical Medicine and Hygiene. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

SOCIAL RELATIONSHIPS AND SLEEP QUALITY

PubMed Central

Kent, Robert G.; Uchino, Bert N.; Cribbet, Matthew R.; Bowen, Kimberly; Smith, Timothy W.

2015-01-01

Background The quality of social relationships and social support appears to be associated with physical health outcomes and sleep quality. Almost all previous research in this area focuses on positive aspects of relationships. Purpose The present study thus intended to examine the links between supportive, aversive, ambivalent, and indifferent network ties and sleep quality. Methods Relationship data, PSQI-assessed sleep quality, and depression were examined in 175 middle-aged and older adults. Results Consistent with hypotheses, supportive ties were positively related to sleep quality, while aversive ties predicted worse sleep quality; associations that were primarily seen for close relationships. Ambivalent and indifferent ties were not significant predictors of sleep quality. Importantly, depression was found to mediate the link between relationship quality and sleep quality. Conclusions These data suggest the more specific types of social relationships that may be linked to poor sleep quality, and that depression appears to underlie these associations. PMID:25976874

Advanced Technology Composite Fuselage - Materials and Processes

NASA Technical Reports Server (NTRS)

Scholz, D. B.; Dost, E. F.; Flynn, B. W.; Ilcewicz, L. B.; Nelson, K. M.; Sawicki, A. J.; Walker, T. H.; Lakes, R. S.

1997-01-01

The goal of Boeing's Advanced Technology Composite Aircraft Structures (ATCAS) program was to develop the technology required for cost and weight efficient use of composite materials in transport fuselage structure. This contractor report describes results of material and process selection, development, and characterization activities. Carbon fiber reinforced epoxy was chosen for fuselage skins and stiffening elements and for passenger and cargo floor structures. The automated fiber placement (AFP) process was selected for fabrication of monolithic and sandwich skin panels. Circumferential frames and window frames were braided and resin transfer molded (RTM'd). Pultrusion was selected for fabrication of floor beams and constant section stiffening elements. Drape forming was chosen for stringers and other stiffening elements. Significant development efforts were expended on the AFP, braiding, and RTM processes. Sandwich core materials and core edge close-out design concepts were evaluated. Autoclave cure processes were developed for stiffened skin and sandwich structures. The stiffness, strength, notch sensitivity, and bearing/bypass properties of fiber-placed skin materials and braided/RTM'd circumferential frame materials were characterized. The strength and durability of cocured and cobonded joints were evaluated. Impact damage resistance of stiffened skin and sandwich structures typical of fuselage panels was investigated. Fluid penetration and migration mechanisms for sandwich panels were studied.

[Plastics on the eye - plastics in the eye. Human-optic materials].

PubMed

Geyer, Otto-Christian; Schwabe, Peter; Wingler, Frank

2002-01-01

Materials of identical or similiar chemical classes are used for contact optics as well as for implantable intraocular devices. All of them derive from the chemistry of industrial product developments. Materials used in and on the eye should behave indifferent. They should not provoke any reaction in the eye and not themselves be altered by the biological surroundings. For materials used in the eye an especially high purity of the polymers utilized as well as a long term light stability is to be demanded. Optical properties like transparency have to be stable over extended time periods under normal light influence. The long time stability of UV-absorbing additives in the materials used has to be verified. All materials used for IOL's - with the exception of the homopolymer of methylmethacrylate - consist of polymer mixtures forming socalled interpenetrating networks which appear as an uniform material. For the manufacturing of intraocular lense materials standardized or unanimous producer prescriptions are not existing. Based on the different polymer formulations different aging and fatigue properties are the outcome. In addition only inadequate knowledge about the long term light stability of the incorporated UV blockers is submitted. Polymeric materials used for IOL's should be subjected in addition to the test methods listed in EN-ISO 11 979/5 to chemical, polymeranalytic and mechanical substance examinations. As a standard in such examinations a polymethylmethacrylate, free of methylacrylate is proposed. Examinations of each lot should be compulsory. Identification of all ingredients of the intraocular materials should be prescribed and labeled in line with the revelations of common medical drugs prescriptions. The relevations commit the medical doctor to inform his patient about possible side effects of the intraocular implants.

A random utility model of delay discounting and its application to people with externalizing psychopathology.

PubMed

Dai, Junyi; Gunn, Rachel L; Gerst, Kyle R; Busemeyer, Jerome R; Finn, Peter R

2016-10-01

Previous studies have demonstrated that working memory capacity plays a central role in delay discounting in people with externalizing psychopathology. These studies used a hyperbolic discounting model, and its single parameter-a measure of delay discounting-was estimated using the standard method of searching for indifference points between intertemporal options. However, there are several problems with this approach. First, the deterministic perspective on delay discounting underlying the indifference point method might be inappropriate. Second, the estimation procedure using the R2 measure often leads to poor model fit. Third, when parameters are estimated using indifference points only, much of the information collected in a delay discounting decision task is wasted. To overcome these problems, this article proposes a random utility model of delay discounting. The proposed model has 2 parameters, 1 for delay discounting and 1 for choice variability. It was fit to choice data obtained from a recently published data set using both maximum-likelihood and Bayesian parameter estimation. As in previous studies, the delay discounting parameter was significantly associated with both externalizing problems and working memory capacity. Furthermore, choice variability was also found to be significantly associated with both variables. This finding suggests that randomness in decisions may be a mechanism by which externalizing problems and low working memory capacity are associated with poor decision making. The random utility model thus has the advantage of disclosing the role of choice variability, which had been masked by the traditional deterministic model. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

The banning of Frederick Wiseman's movie, "Titicut Follies"--censoring the evidence.

PubMed

Neuhauser, Duncan

2003-01-01

Poor quality of care in the form of indifference and indignity can be seen as the filmmaker Frederick Wiseman shows in his classic documentary, "Titicut Follies," which was banned from public showing for 25 years.

Hermetically sealable package for hybrid solid-state electronic devices and the like

NASA Technical Reports Server (NTRS)

Miller, Wilson N. (Inventor); Gray, Ormal E. (Inventor)

1988-01-01

A light-weight, inexpensively fabricated, hermetically sealable, repairable package for small electronic or electromechanical units, having multiple connections, is described. A molded ring frame of polyamide-imide plastic (Torlon) is attached along one edge to a base plate formed of a highly heat conducting material, such as aluminum or copper. Bores are placed through a base plate within the area of the edge surface of ring frame which result in an attachment of the ring frame to the base plate during molding. Electrical leads are molded into the ring frame. The leads are L-shaped gold-plated copper wires imbedded within widened portions of the side wall of the ring frame. Within the plastic ring frame wall the leads are bent (typically, though not necessarily at 90 deg) so that they project into the interior volume of the ring frame for connection to the solid state devices.

Marching toward reproductive justice: coalitional (re) framing of the March for Women's Lives.

PubMed

Luna, Zakiya T

2010-01-01

This article examines how coalition frames develop and what happens to that frame after the formal coalition ends. To that end, I analyze the frame shift around the 2004 March for Women's Lives (March). The March initially focused on established ideas of reproductive rights around which the four national mainstream co-sponsors previously organized. However, after a newer reproductive justice organization joined the coalition, material and organizing reflected a shift in framing to reproductive justice. How did this change happen? What are the impacts of this event for the women's movement? Through document analysis and interviews, I trace the negotiations that facilitated this framing shift. I argue that this new coalition frame translated into positive lasting changes in organizing for women's reproductive health even as the coalition dissolved and some of the tensions within the larger women's movement remain.

Methods for measuring plating thicknesses on TAB lead frames

NASA Technical Reports Server (NTRS)

Hagen, M. P.

1977-01-01

Plating three layer tape lead frames, used for tape automated bonding, offers a challenge to the electroplater because of nonuniform topography. Each lead frame contains large (typically .05 x. .05 inch) flat test pads located around the perimeter of the frame. These test pads are electrically connected to the bondable lead frame fingers which extend into an area in the center of the frame called the feature hole. The feature hole exposes these fingers to plating on all sides, while the test pads are exposed on only one side. In addition, the fingers are small in cross section (typically .003 x .0015 inches). Recent thickness measurements indicate that plating around the lead frame fingers is nearly twice as thick as that on test pad areas. Procedures and equipment were developed for measuring the thickness of the deposited material. Discussion was centered on the data obtained using the various measurement techniques and equipment.

Evaluation of a metal fuselage frame selectively reinforced with filamentary composites for space shuttle application

NASA Technical Reports Server (NTRS)

Oken, S.; Skoumal, D. E.; Straayer, J. W.

1974-01-01

The development of metal structures reinforced with filamentary composites as a weight saving feature of the space shuttle components is discussed. A frame was selected for study that was representative of the type of construction used in the bulk frames of the orbiter vehicle. Theoretical and experimental investigations were conducted. Component tests were performed to evaluate the critical details used in the designs and to provide credibility to the weight saving results. A model frame was constructed of the reinforced metal material to provide a final evaluation of the construction under realistic load conditions.

Behavior of Frame-Stiffened Composite Panels with Damage

NASA Technical Reports Server (NTRS)

Jegley, Dawn C.

2013-01-01

NASA, the Air Force Research Laboratory and The Boeing Company have worked to develop new low-cost, light-weight composite structures for aircraft. A Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) concept has been developed which offers advantages over traditional metallic structures. In this concept, a stitched carbon-epoxy material system has been developed with the potential for reducing the weight and cost of transport aircraft structure by eliminating fasteners, thereby reducing part count and labor. Stitching and the use of thin skins with rod-stiffeners to move loading away from the morevulnerable outer surface produces a structurally efficient, damage tolerant design. This study focuses on the behavior of PRSEUS panels loaded in the frame direction and subjected to severe damage in the form of a severed central frame in a three-frame panel. Experimental results for a pristine two-frame panel and analytical predictions for pristine two-frame and three-frame panels as well as damaged three-frame panels are described.

Choice in the repeated-gambles experiment.

PubMed

Silberberg, A; Murray, P; Christensen, J; Asano, T

1988-09-01

Humans chose 10 times between two roulette wheels projected on a monitor. During the first trial, the left wheel provided a hypothetical $100 with p = .94, and the right wheel provided $250 with p = .39. A titration procedure adjusted the probability of a $250 win across trials to permit estimation of an indifference point between alternatives. In Experiment 1, intertrial-interval duration (25 vs. 90 s) and whether sessions began with an intertrial interval or a trial were varied in a 2 x 2 design in this risky-choice procedure. Risk aversion (preference for the $100 wheel) increased with intertrial interval but was unaffected by whether sessions began with a trial or an intertrial interval. In Experiment 2, all sessions began with a trial, and subjects were informed that the experiment ended after 10 trials. Intertrial-interval duration had no effect on choice. In Experiment 3, intertrial-interval duration and whether subjects were given $10 or $10,000 before beginning were varied among four groups in a 2 x 2 design. In all other ways, the procedure was unchanged from Experiment 2. Intertrial interval had no effect on choice, but the $10,000 groups showed less risk aversion than the $10 groups. These results can be explained more readily in terms of Kahneman and Tversky's (1984) notion of "framing of the prospect" than in terms of Rachlin, Logue, Gibbon, and Frankel's (1986) behavioral account of risky choice.

Inverse estimation of the elastic and anelastic properties of the porous frame of anisotropic open-cell foams.

PubMed

Cuenca, Jacques; Göransson, Peter

2012-08-01

This paper presents a method for simultaneously identifying both the elastic and anelastic properties of the porous frame of anisotropic open-cell foams. The approach is based on an inverse estimation procedure of the complex stiffness matrix of the frame by performing a model fit of a set of transfer functions of a sample of material subjected to compression excitation in vacuo. The material elastic properties are assumed to have orthotropic symmetry and the anelastic properties are described using a fractional-derivative model within the framework of an augmented Hooke's law. The inverse estimation problem is formulated as a numerical optimization procedure and solved using the globally convergent method of moving asymptotes. To show the feasibility of the approach a numerically generated target material is used here as a benchmark. It is shown that the method provides the full frequency-dependent orthotropic complex stiffness matrix within a reasonable degree of accuracy.

Evaluation of Eco-Efficiency and Performance of Retrofit Materials

NASA Astrophysics Data System (ADS)

Gopinath, Smitha; Rama Chandra Murthy, A.; Iyer, Nagesh R.; Kokila, S.

2015-12-01

In this work three materials namely Fiber Reinforced Polymer (FRP), ferrocement and Textile Reinforced Concrete (TRC) have been evaluated towards their performance efficiency and eco-effectiveness for sustainable retrofitting applications. Investigations have been carried out for flexural strengthening of RC beams with FRP, ferrocement and TRC. It is observed that in the case of FRP, it is not possible to tailor the material according to design requirements and most of the time strengthened structure becomes over stiff. Eco-effectiveness of these retrofitting materials has been evaluated by computing the embodied energy. It is observed that the amount of CO2 emitted by TRC is less compared to other retrofit materials. Further, the performance point of retrofitted RC frames has been evaluated and damage index has been calculated to find out the effective retrofit material. It is concluded that, if RC frame is retrofitted with FRP and TRC, it undergoes less damage compared to ferrocement.

Development of a model to assess acoustic treatments to reduce railway noise

NASA Astrophysics Data System (ADS)

Jeong, H.; Squicciarini, G.; Thompson, D. J.; Ryue, J.

2016-09-01

Porous materials have recently been used in absorptive treatments around railway tracks to reduce noise emissions. To investigate the effect of porous materials, a finite element model has been developed. 2D models for porous materials have been considered either as an equivalent fluid or as a poroelastic material based on the Biot theory. The two models have been validated and compared with each other to check the effect of the skeleton vibration. The poroelastic FE model has been coupled with a 2D acoustic boundary element model for use in railway applications. The results show that it may be necessary to include the frame vibration, especially at low frequencies where a frame resonance occurs. A method for the characterization of porous materials is also discussed. From this it is shown that the elastic properties of the material determine the resonance frequency and the magnitude.

Rigidified pneumatic composites

NASA Astrophysics Data System (ADS)

van Dessel, Steven

2000-10-01

The overall objective of the research presented in this dissertation was to address global issues of adequate housing for all and the need for more sustainable human settlement. In order to address these, the emerging technology of rigidified pneumatic composites was investigated. Rigidified pneumatic composites (RPC) are defined as thin flexible membrane structures that are pneumatically deployed. After deployment, these structures harden due to chemical or physical change of the membrane. Because of this change, these structures do no longer require pneumatic pressure to maintain their shape. For the first time, a systematic listing of the various means available to develop polymeric materials useful in RPC technology is presented. With the aim to reduce the cost of RPC structures, a new material was proposed, developed, and evaluated. This material involved the formation of a semi-interpenetrating polymer network based on poly vinyl chloride and an acrylate based reactive plasticizer. The economical and environmental performances of RPC structures using this new material were assessed by means of a case study. In this study, the performance of RPC technology was compared with that of a typical wood light frame structure in the application of a small single-family house. The study indicated that the cost of ownership in present day value for the RPC structure was approximately 33% less than the cost of a comparable wood light frame structure. The study also indicated that significant environmental benefits exist with the use of RPC structures. It was found that the RPC structure used significantly less resources compared to the wood light frame structure. About 3.5 times less materials coming from non-renewable fossil resources, about 2.5 times less materials coming from trees, and about 19 times less materials coming from inorganic resources was used in the RPC structure relative to the wood light frame structure. The study concluded with pointing out various means available to further increase the economical and environmental performance of RPC technology. Directions were provided to guide future developments of RPC technology.

Lamination of Hardwood Composite Framing With an Emulsion Polymer-lsocyanate Adhesive and Radio-Frequency Curing

Treesearch

Charles B. Vick

1987-01-01

Composite framing msde from yellow-poplar and sweetgum parallel-laminated veneer and oriented flakeboard was effectively laminated with an emulsion polymer/isocyanate adhesive and radio-frequency curing at an assumed but typical range of material surface characteristics and factory assembly conditions.

Patterns of Middle-Class Parenting and Adolescent Underachievement.

ERIC Educational Resources Information Center

Metcalf, Kaaren; Gaier, Eugene L.

1987-01-01

Examined 11th and 12th graders from upward striving, overprotective, indifferent, and conflicted homes concerning their attitudes toward their parents and academic achievement. Found upward-striving patterns of parenting significantly associated with underachievement. Pressuring these adolescents aroused reactions of anger, resentment, and…

Challenging Sexual Harassment on Campus

ERIC Educational Resources Information Center

Baker, Nancy V.

2010-01-01

More than thirty years ago, an administrative assistant at Cornell University first challenged her university's indifference to her boss's sexually predatory behavior. While she did not prevail, her case sparked a movement. Litigation, news stories, and government guidelines defining sexual harassment followed. And universities responded: policies…

Classroom Incivilities.

ERIC Educational Resources Information Center

Boice, Bob

1996-01-01

A five-year study of college classroom incivilities (CI) in large survey courses at a large research university found the most problematic to be teachers displaying aloof, distancing mannerisms; teachers discouraging student involvement with fast-paced lectures; student noisiness and indifference; students coming late, leaving early; and students'…

Organizational Orientations in an Instructional Setting

ERIC Educational Resources Information Center

Tibbles, David; Richmond, Virginia P.; McCroskey, James C.; Weber, Keith

2008-01-01

Research on organizational orientations has determined that workers can be categorized into three groups on the basis of their trait orientations toward working in organizations: "upward mobiles," "indifferents," and "ambivalents." Because workers' organizational orientation is predictive of their success, we reasoned that students' orientation…

Conceptual design of modular fixture for frame welding and drilling process integration case study: Student chair in UNS industrial engineering integrated practicum

NASA Astrophysics Data System (ADS)

Darmawan, Tofiq Dwiki; Priadythama, Ilham; Herdiman, Lobes

2018-02-01

Welding and drilling are main processes of making chair frame from metal material. Commonly, chair frame construction includes many arcs which bring difficulties for its welding and drilling process. In UNS industrial engineering integrated practicum there are welding fixtures which use to fixing frame component position for welding purpose. In order to achieve exact holes position for assembling purpose, manual drilling processes were conducted after the frame was joined. Unfortunately, after it was welded the frame material become hard and increase drilling tools wear rate as well as reduce holes position accuracy. The previous welding fixture was not equipped with clamping system and cannot accommodate drilling process. To solve this problem, our idea is to reorder the drilling process so that it can be execute before welding. Thus, this research aims to propose conceptual design of modular fixture which can integrate welding and drilling process. We used Generic Product Development Process to address the design concept. We collected design requirements from 3 source, jig and fixture theoretical concepts, user requirements, and clamping part standards. From 2 alternatives fixture tables, we propose the first which equipped with mounting slots instead of holes. We test the concept by building a full sized prototype and test its works by conducting welding and drilling of a student chair frame. Result from the welding and drilling trials showed that the holes are on precise position after welding. Based on this result, we conclude that the concept can be a consideration for application in UNS Industrial Engineering Integrated Practicum.

Structural design and performance of a rear support walking frame.

PubMed

Woollam, P J; Miller, K; McLeod, N; Batty, D; Stallard, J

2002-01-01

Rear support walking frames provide predetermined vertical support for patients with dysfunctional lower limbs that have limited active control; the support is provided through a spring-loaded boom hinged on an upright stanchion mounted at the rear of a wheeled frame within which the patient ambulates. The application of these frames for total-body-involved cerebral palsy patients, in combination with a walking orthosis, has highlighted a number of practical problems that need to be addressed for the system to become fully viable. A composite material prototype walking frame has been developed that permits the patient to be transferred by a single carer without the need to use inappropriate manual handling techniques. The frame has improved structural properties, with stiffness in the sagittal and coronal planes increasing by between 50 and 100 per cent. Evaluation with patients showed that the greater structural stiffness permitted the objective of improved continuity of walking to be achieved. The strength of the frame is such that it can accommodate patients of up to 80 kg, more than twice that possible in the earlier system. Since the structural yield point is approximately twice the maximum working load, the device should not be prone to unacceptable fatigue characteristics. Despite the use of carbon composite materials (which have brittle failure characteristics), the mode of failure is of progressive collapse and is therefore inherently safe. The successful outcome of prototype testing has justified production development. Work is now proceeding on a design that incorporates further improvements in structural performance and ease of manufacture.

Flexible Framework for Capacitive Sensing

NASA Technical Reports Server (NTRS)

Woodard, Stanley E. (Inventor); Taylor, Bryant D. (Inventor)

2006-01-01

A flexible framework supports electrically-conductive elements in a capacitive sensing arrangement. Identical frames are arranged end-to-end with adjacent frames being capable of rotational movement there between. Each frame has first and second passages extending therethrough and parallel to one another. Each of the first and second passages is adapted to receive an electrically-conductive element therethrough. Each frame further has a hollowed-out portion for the passage of a fluent material therethrough. The hollowed-out portion is sized and shaped to provide for capacitive sensing along a defined region between the electrically-conductive element in the first passage and the electrically-conductive element in the second passage.

A novel interpretation of the Fractional Inhibitory Concentration Index: The case Origanum vulgare L. and Leptospermum scoparium J. R. et G. Forst essential oils against Staphylococcus aureus strains.

PubMed

Fratini, Filippo; Mancini, Simone; Turchi, Barbara; Friscia, Elisabetta; Pistelli, Luisa; Giusti, Giulia; Cerri, Domenico

2017-01-01

Origanum vulgare (oregano) and Leptospermum scoparium (manuka) were traditionally employed as natural remedies for infected wounds and skin injuries where Staphylococcus aureus is mainly involved. The first aim of this study was to investigate oregano and manuka essential oils (EOs) chemical compositions and evaluate their antibacterial activity (MIC, Minimum Inhibitory Concentration) against fourteen S. aureus wild strains. The second aim was to evaluate the antibacterial activities of oregano and manuka EOs mixed in different combination (FIC, Fractional Inhibitory Concentration) with an improved chequerboard technique. This allowed to avoid the usual uncertainty in the determination of MIC and FIC values and to obtain a more precise interpretation of FIC indexes (FICIs). Moreover, FICIs were discussed on the basis of a novel interpretation method to evaluate the synergistic/antagonistic effect of EOs mixtures. The most representative compounds in oregano EO were Carvacrol (65.93%), p-Cymene (9.33%) and γ-Terpinene (5.25%), while in manuka EO were Leptospermone (31.65%), cis-Calamenene (15.93%) and Flavesone (6.92%). EOs presented MIC values ranging from 1:2048 to 1:4096 v/v and FIC values ranging from 0.125 to 1. According to our interpretation, a synergistic effect (34.68%), a commutative effect (15.32%) and an indifferent effect (50.00%) and no antagonistic effect were observed. Conversely, according to two previously proposed FICI interpretation models, 1.80% synergistic effect could be observed and, respectively, 98.20% indifferent effect or 48.20% additive effect and 50.00% indifferent effect. As practical results, oregano and manuka EOs may be an effective alternative to chemotherapic drugs in staphylococcal infections and useful tools to enhance food security. Copyright © 2016 Elsevier GmbH. All rights reserved.

Power inverters

DOEpatents

Miller, David H [Redondo Beach, CA; Korich, Mark D [Chino Hills, CA; Smith, Gregory S [Woodland Hills, CA

2011-11-15

Power inverters include a frame and a power module. The frame has a sidewall including an opening and defining a fluid passageway. The power module is coupled to the frame over the opening and includes a substrate, die, and an encasement. The substrate includes a first side, a second side, a center, an outer periphery, and an outer edge, and the first side of the substrate comprises a first outer layer including a metal material. The die are positioned in the substrate center and are coupled to the substrate first side. The encasement is molded over the outer periphery on the substrate first side, the substrate second side, and the substrate outer edge and around the die. The encasement, coupled to the substrate, forms a seal with the metal material. The second side of the substrate is positioned to directly contact a fluid flowing through the fluid passageway.

Piezoelectric step-motion actuator

DOEpatents

Mentesana,; Charles, P [Leawood, KS

2006-10-10

A step-motion actuator using piezoelectric material to launch a flight mass which, in turn, actuates a drive pawl to progressively engage and drive a toothed wheel or rod to accomplish stepped motion. Thus, the piezoelectric material converts electrical energy into kinetic energy of the mass, and the drive pawl and toothed wheel or rod convert the kinetic energy of the mass into the desired rotary or linear stepped motion. A compression frame may be secured about the piezoelectric element and adapted to pre-compress the piezoelectric material so as to reduce tensile loads thereon. A return spring may be used to return the mass to its resting position against the compression frame or piezoelectric material following launch. Alternative embodiment are possible, including an alternative first embodiment wherein two masses are launched in substantially different directions, and an alternative second embodiment wherein the mass is eliminated in favor of the piezoelectric material launching itself.

Analysis of frame structure of medium and small truck crane

NASA Astrophysics Data System (ADS)

Cao, Fuyi; Li, Jinlong; Cui, Mengkai

2018-03-01

Truck crane is an important part of hoisting machinery. Frame, as the support component of the quality of truck crane, determines the safety of crane jib load and the rationality of structural design. In this paper, the truck crane frame is a box structure, the three-dimensional model is established in CATIA software, and imported into Hyperworks software for finite element analysis. On the base of doing constraints and loads for the finite element model of the frame, the finite element static analysis is carried out. And the static stress test verifies whether the finite element model and the frame structure design are reasonable; then the free modal analysis of the frame and the analysis of the first 8 - order modal vibration deformation are carried out. The analysis results show that the maximum stress value of the frame is greater than the yield limit value of the material, and the low-order modal value is close to the excitation frequency value, which needs to be improved to provide theoretical reference for the structural design of the truck crane frame.

48 CFR 1615.404-70 - Profit analysis factors.

Code of Federal Regulations, 2010 CFR

2010-10-01

... indifference to cost control will generally result in a negative weight. (2) Contract cost risk. In assessing..., group size, enrollment demographics and fluctuation, and the probability of conversion and adverse... “loss carry forward basis” of experience-rated group insurance practices, which mitigates contract risk...

48 CFR 1615.404-70 - Profit analysis factors.

Code of Federal Regulations, 2012 CFR

2012-10-01

... indifference to cost control will generally result in a negative weight. (2) Contract cost risk. In assessing..., group size, enrollment demographics and fluctuation, and the probability of conversion and adverse... “loss carry forward basis” of experience-rated group insurance practices, which mitigates contract risk...

48 CFR 1615.404-70 - Profit analysis factors.

Code of Federal Regulations, 2014 CFR

2014-10-01

... indifference to cost control will generally result in a negative weight. (2) Contract cost risk. In assessing..., group size, enrollment demographics and fluctuation, and the probability of conversion and adverse... “loss carry forward basis” of experience-rated group insurance practices, which mitigates contract risk...

Colleges Must Get Used to Collaborating with Congress

ERIC Educational Resources Information Center

Trible, Paul

2005-01-01

Differences in political ideology between college and university administrators and federal legislators have brought about lack of communication, mistrust, and indifference between Congress and higher education. This article discusses the bridging of these differences through common understanding and collaboration to meet the challenges faced by…

Effective Motivation through Meeting Student Needs.

ERIC Educational Resources Information Center

Grenchik, Denise; O'Connor, Elaine; Postelli, Gina

High school students' lack of personal responsibility and academic ownership, negative or indifferent attitude, and lack of initiative and general motivation are often of concern to teachers and parents. This action research project evaluated an intervention to increase high school students' motivation, responsibility, and initiative. Students…

A Strategy for Understanding Noise-Induced Annoyance

DTIC Science & Technology

1988-08-01

Estimation by Sequential Testing (PEST) (Taylor and Creelman , 1967) can be used to efficiently establish the indifference point for each such pair of...population on applicability of noise rating procedures". Noise Control Engineering, 4, 65-70. Taylor, M. M. & Creelman , C. D. "PEST: Efficient

Of mice and men (and mosquitofish): Antiandrogens and androgens in the environment

EPA Science Inventory

Androgens are hormones produced by the gonads and other endocrine organs of all vertebrates. Testosterone, along with its metabolite dihydrotestosterone, is critical for differentiation of the fetal male reproductive tract from an indifferent state, for the development of male tr...

Analyzing Subsidies in Microsoft Excel

ERIC Educational Resources Information Center

Mixon, J. Wilson, Jr.

2005-01-01

Applying the budget line/indifference curve apparatus to policy issues reveals important and sometimes counterintuitive policy implications. Also, it provides practice in using the apparatus. The author applies these tools to subsidies. The analysis follows textbook treatments but is extended at some points. In particular, the present analysis…

Redistribution, Recognition and Representation: Working against Pedagogies of Indifference

ERIC Educational Resources Information Center

Lingard, Bob; Keddie, Amanda

2013-01-01

This paper reports on an Australian government-commissioned research study that documented classroom pedagogies in 24 Queensland schools. The research created the model of "productive pedagogies", which conjoined what Nancy Fraser calls a politics of redistribution, recognition and representation. In this model pedagogies are…

Failure to replicate the 'work ethic" effect in pigeons.

PubMed

Vasconcelos, Marco; Urcuioli, Peter J; Lionello-DeNolf, Karen M

2007-05-01

We report six unsuccessful attempts to replicate the "work ethic" phenomenon reported by Clement, Feltus, Kaiser, and Zentall (2000). In Experiments 1-5, pigeons learned two simultaneous discriminations in which the S+ and S- stimuli were obtained by pecking an initial stimulus once or multiple (20 or 40) times. Subsequent preference tests between the S+ stimuli and between the S- stimuli mostly revealed indifference, on average, between the S+ from the multiple-peck (high-effort) trials and the S+ from the one-peck (low-effort) trials, and likewise between the two respective Sstimuli. Using a slightly different procedure that permitted assessment of the relative aversiveness of low versus high effort, Experiment 6 again revealed a pattern of indifference despite showing that pigeons took considerably longer to begin pecking on high- than on low-effort trials. Our findings call into question the reliability of the original findings and the sufficiency of the hypothesized within-trial contrast mechanism to produce them.

Socialization, Indifference, and Convenience: Exploring the Uptake of Influenza Vaccine Among Medical Students and Early Career Doctors.

PubMed

Edge, Rhiannon; Goodwin, Dawn; Isba, Rachel; Keegan, Thomas

2017-11-01

The Chief Medical Officer recommends that all health care workers receive an influenza vaccination annually. High vaccination coverage is believed to be the best protection against the spread of influenza within a hospital, although uptake by health care workers remains low. We conducted semistructured interviews with seven medical students and nine early career doctors, to explore the factors informing their influenza vaccination decision making. Data collection and analysis took place iteratively, until theoretical saturation was achieved, and a thematic analysis was performed. Socialization was important although its effects were attenuated by participants' previous experiences and a lack of clarity around the risks and benefits of vaccination. Many participants did not have strong intentions regarding vaccination. There was considerable disparity between an individual's opinion of the vaccine, their intentions, and their vaccination status. The indifference demonstrated here suggests few are strongly opposed to the vaccination-there is potential to increase vaccination coverage.

New similarity of triangular fuzzy number and its application.

PubMed

Zhang, Xixiang; Ma, Weimin; Chen, Liping

2014-01-01

The similarity of triangular fuzzy numbers is an important metric for application of it. There exist several approaches to measure similarity of triangular fuzzy numbers. However, some of them are opt to be large. To make the similarity well distributed, a new method SIAM (Shape's Indifferent Area and Midpoint) to measure triangular fuzzy number is put forward, which takes the shape's indifferent area and midpoint of two triangular fuzzy numbers into consideration. Comparison with other similarity measurements shows the effectiveness of the proposed method. Then, it is applied to collaborative filtering recommendation to measure users' similarity. A collaborative filtering case is used to illustrate users' similarity based on cloud model and triangular fuzzy number; the result indicates that users' similarity based on triangular fuzzy number can obtain better discrimination. Finally, a simulated collaborative filtering recommendation system is developed which uses cloud model and triangular fuzzy number to express users' comprehensive evaluation on items, and result shows that the accuracy of collaborative filtering recommendation based on triangular fuzzy number is higher.

Socialization, Indifference, and Convenience: Exploring the Uptake of Influenza Vaccine Among Medical Students and Early Career Doctors

PubMed Central

Edge, Rhiannon; Goodwin, Dawn; Isba, Rachel; Keegan, Thomas

2017-01-01

The Chief Medical Officer recommends that all health care workers receive an influenza vaccination annually. High vaccination coverage is believed to be the best protection against the spread of influenza within a hospital, although uptake by health care workers remains low. We conducted semistructured interviews with seven medical students and nine early career doctors, to explore the factors informing their influenza vaccination decision making. Data collection and analysis took place iteratively, until theoretical saturation was achieved, and a thematic analysis was performed. Socialization was important although its effects were attenuated by participants’ previous experiences and a lack of clarity around the risks and benefits of vaccination. Many participants did not have strong intentions regarding vaccination. There was considerable disparity between an individual’s opinion of the vaccine, their intentions, and their vaccination status. The indifference demonstrated here suggests few are strongly opposed to the vaccination—there is potential to increase vaccination coverage. PMID:28737075

Hospital CEOs Need Health IT Knowledge and Trust in CIOs: Insights from a Qualitative Study.

PubMed

Thye, Johannes; Hübner, Ursula; Weiß, Jan-Patrick; Teuteberg, Frank; Hüsers, Jens; Liebe, Jan-David; Babitsch, Birgit

2018-01-01

IT is getting an increasing importance in hospitals. In this context, major IT decisions are often made by CEOs who are not necessarily IT experts. Therefore, this study aimed at a) exploring different types of IT decision makers at CEO level, b) identifying hypotheses if trust exists between these different types of CEOs and their CIOs and c) building hypotheses on potential consequences regarding risk taking and innovation. To this end, 14 qualitative interviews with German hospital CEOs were conducted to explore the research questions. The study revealed three major types: IT savvy CEOs, IT enthusiastic CEOs and IT indifferent CEOs. Depending on these types, their relationship with the CIO varied in terms of trust and common language. In case of IT indifferent CEOs, a potential vicious circle of lack of IT knowledge, missing trust, low willingness to take risks and low innovation power could be identified. In order to break of this circle, CEOs seem to need more IT knowledge and/or greater trust in their CIO.

Testing safety eyewear: how frame and lens design affect lens retention.

PubMed

McMahon, Janice M; Beckerman, Stephen

2007-02-01

The aim of this study was to determine the role that frame and lens design play in lens retention during high-impact testing of safety eyewear that advertises conformance to the performance-based ANSI Z87.1-2003 standard. A total of 75 Z87 safety eyeglass frames (3 each of 25 frame models) were used in this study, procured from 5 of the leading U.S. safety frame manufacturers. Frames were fitted by an independent laboratory with 2.0-mm plano polycarbonate lenses in compliance with ANSI Z87.1-2003. Finished spectacles were sent to a subsequent laboratory testing facility where each frame was subjected to both high-mass and oblique-incidence high-velocity impacts to determine frame characteristics that were most highly associated with testing failure. Among the frame and lens parameters that were considered in this analysis were the A and B dimensions, effective diameter, distance between lenses, bridge type, frame material, bevel type, and frame cost. Certain variables were controlled for by maintaining consistency among all spectacle pairs, e.g., lens prescription, center thickness, and edge thickness. Multiple logistic regression was used to control potential confounding variables and to develop the best combination of them for predictive value. Of 25 separate frame models assessed, 10 passed both high-mass and high-velocity impact testing, i.e., none of the 3 frame/lens samples failed. Of the models that failed, 13 failures were caused by high-velocity testing, 1 by high-mass testing, and 1 failed both high-mass and high-velocity testing. None of the 15 spectacles with the SprinGuardtrade mark (Hilco, Plainville, Massachusetts) bevel design failed, although these were proprietary to 1 manufacturer and included only 5 frame models. Two spectacle designs (6 individual frames) incorporated an inverted bevel design of which 3 of the frames failed impact testing. Controlling for drop ball velocity among the 54 remaining standard "V" bevel spectacle pairs, the odds of failure were about 8 to 9 times higher for metal frames than Zylonite frames (odds ratio [OR], 8.5; 95% confidence interval [CI], 1.4 to 52.3; P = 0.02), and the odds of failure were about 4 times higher for lens effective diameters of less than 50 mm than for lens effective diameters more than 50 mm (OR, 4.1; 95% CI, 1.2 to 14.8; P = 0.03). Among our sample of safety spectacles, failure from high-mass impact resistance testing rarely occurred. No spectacles with the SprinGuard bevel design failed in our analysis, but this was limited to a small sample size from a single manufacturer. Among our sample of 54 spectacle pairs with a v-bevel design, metal frame material and an effective diameter of less than 50 mm were the strongest predictors of failure relative to high-velocity impact testing with a 45 degrees temporal angle projectile.

A Numbers Game: Two Case Studies in Teaching Data Journalism

ERIC Educational Resources Information Center

Treadwell, Greg; Ross, Tara; Lee, Allan; Lowenstein, Jeff Kelly

2016-01-01

Influenced by the practices of social scientists, data journalists seek to create stories that frame social reality through quantitative data analysis. While the use of statistics by journalists is not new, exponential growth in available data and a desire for source material unmediated by political and public-relations framings have seen data…

Construction Cluster Volume I [Wood Structural Framing].

ERIC Educational Resources Information Center

Pennsylvania State Dept. of Justice, Harrisburg. Bureau of Correction.

The document is the first of a series, to be integrated with a G.E.D. program, containing instructional materials at the basic skills level for the construction cluster. It focuses on wood structural framing and contains 20 units: (1) occupational information; (2) blueprint reading; (3) using leveling instruments and laying out building lines; (4)…

Building Trades. Block III. Floor Framing.

ERIC Educational Resources Information Center

Texas A and M Univ., College Station. Vocational Instructional Services.

This document contains three units of a course on floor framing to be used as part of a building trades program. Each unit consists, first, of an informational lesson, with complete lesson plan for the teacher's use. Included in each lesson plan are the lesson aim; lists of teaching aids, materials, references, and prerequisites for students;…

Energy efficiency in light-frame wood construction

Treesearch

Gerald E. Sherwood; Gunard Hans

1979-01-01

This report presents information needed for design and construction of energy-efficient light-frame wood structures. The opening section discusses improving the thermal performance of a house by careful planning and design. A second section of the report provides technical information on the thermal properties of construction materials, and on the basic engineering...

Evaluation of aluminum ultralight rigid wheelchairs versus other ultralight wheelchairs using ANSI/RESNA standards.

PubMed

Liu, Hsin-yi; Pearlman, Jonathan; Cooper, Rosemarie; Hong, Eun-kyoung; Wang, Hongwu; Salatin, Benjamin; Cooper, Rory A

2010-01-01

Previous studies found that select titanium ultralight rigid wheelchairs (TURWs) had fewer equivalent cycles and less value than select aluminum ultralight folding wheelchairs (AUFWs). The causes of premature failure of TURWs were not clear because the TURWs had different frame material and design than the AUFWs. We tested 12 aluminum ultralight rigid wheelchairs (AURWs) with similar frame designs and dimensions as the TURWs using the American National Standards Institute/Rehabilitation Engineering and Assistive Technology Society of North America and International Organization for Standardization wheelchair standards and hypothesized that the AURWs would be more durable than the TURWs. Across wheelchair models, no significant differences were found in the test results between the AURWs and TURWs, except in their overall length. Tire pressure, tube-wall thickness, and tube manufacturing were proposed to be the factors affecting wheelchair durability through comparison of the failure modes, frames, and components. The frame material did not directly affect the performance of AURWs and TURWs, but proper wheelchair manufacture and design based on mechanical properties are important.

Study to investigate design, fabrication and test of low cost concepts for large hybrid composite helicopter fuselage, phase 1

NASA Technical Reports Server (NTRS)

Adams, K. M.; Lucas, J. J.

1975-01-01

The development of a frame/stringer/skin fabrication technique for composite airframe construction was studied as a low cost approach to the manufacture of large helicopter airframe components. A center cabin aluminum airframe section of the Sikorsky CH-53D helicopter was selected for evaluation as a composite structure. The design, as developed, is composed of a woven KEVLAR-49/epoxy skin and graphite/epoxy frames and stringers. To support the selection of this specific design concept a materials study was conducted to develop and select a cure compatible graphite and KEVLAR-49/epoxy resin system, and a foam system capable of maintaining shape and integrity under the processing conditions established. The materials selected were, Narmco 5209/Thornel T-300 graphite, Narmco 5209/KEVLAR-49 woven fabric, and Stathane 8747 polyurethane foam. Eight specimens were fabricated, representative of the frame, stringer, and splice joint attachments. Evaluation of the results of analysis and test indicate that design predictions are good to excellent except for some conservatism of the complex frame splice.

Multi-material size optimization of a ladder frame chassis

NASA Astrophysics Data System (ADS)

Baker, Michael

The Corporate Average Fuel Economy (CAFE) is an American fuel standard that sets regulations on fuel economy in vehicles. This law ultimately shapes the development and design research for automakers. Reducing the weight of conventional cars offers a way to improve fuel efficiency. This research investigated the optimality of an automobile's ladder frame chassis (LFC) by conducting multi-objective optimization on the LFC in order to reduce the weight of the chassis. The focus of the design and optimization was a ladder frame chassis commonly used for mass production light motor vehicles with an open-top rear cargo area. This thesis is comprised of two major sections. The first looked to perform thickness optimization in the outer walls of the ladder frame. In the second section, many multi-material distributions, including steel and aluminium varieties, were investigated. A simplified model was used to do an initial hand calculation analysis of the problem. This was used to create a baseline validation to compare the theory with the modeling. A CAD model of the LFC was designed. From the CAD model, a finite element model was extracted and joined using weld and bolt connectors. Following this, a linear static analysis was performed to look at displacement and stresses when subjected to loading conditions that simulate harsh driving conditions. The analysis showed significant values of stress and displacement on the ends of the rails, suggesting improvements could be made elsewhere. An optimization scheme was used to find the values of an all steel frame an optimal thickness distribution was found. This provided a 13% weight reduction over the initial model. To advance the analysis a multi-material approach was used to push the weight savings even further. Several material distributions were analyzed and the lightest utilized aluminium in all but the most strenuous subjected components. This enabled a reduction in weight of 15% over the initial model, equivalent to approximately 1 mile per gallon (MPG) in fuel economy.

Effect of URM infills on seismic vulnerability of Indian code designed RC frame buildings

NASA Astrophysics Data System (ADS)

Haldar, Putul; Singh, Yogendra; Paul, D. K.

2012-03-01

Unreinforced Masonry (URM) is the most common partitioning material in framed buildings in India and many other countries. Although it is well-known that under lateral loading the behavior and modes of failure of the frame buildings change significantly due to infill-frame interaction, the general design practice is to treat infills as nonstructural elements and their stiffness, strength and interaction with the frame is often ignored, primarily because of difficulties in simulation and lack of modeling guidelines in design codes. The Indian Standard, like many other national codes, does not provide explicit insight into the anticipated performance and associated vulnerability of infilled frames. This paper presents an analytical study on the seismic performance and fragility analysis of Indian code-designed RC frame buildings with and without URM infills. Infills are modeled as diagonal struts as per ASCE 41 guidelines and various modes of failure are considered. HAZUS methodology along with nonlinear static analysis is used to compare the seismic vulnerability of bare and infilled frames. The comparative study suggests that URM infills result in a significant increase in the seismic vulnerability of RC frames and their effect needs to be properly incorporated in design codes.

The use of message framing to promote sexual risk reduction in young adolescents: a pilot exploratory study

PubMed Central

Camenga, Deepa R.; Hieftje, Kimberly D.; Fiellin, Lynn E.; Edelman, E. Jennifer; Rosenthal, Marjorie S.; Duncan, Lindsay R.

2014-01-01

Few studies have explored the application of message framing to promote health behaviors in adolescents. In this exploratory study, we examined young adolescents’ selection of gain- versus loss-framed images and messages when designing an HIV-prevention intervention to promote delayed sexual initiation. Twenty-six adolescents (aged 10–14 years) participated in six focus groups and created and discussed posters to persuade their peers to delay the initiation of sexual activity. Focus groups were audio-recorded and transcribed. A five-person multidisciplinary team analyzed the posters and focus group transcripts using thematic analysis. The majority of the posters (18/26, 69%) contained both gain- and loss-framed content. Of the 93/170 (56%) images and messages with framing, similar proportions were gain- (48/93, 52%) and loss-framed (45/93, 48%). Most gain-framed content (23/48, 48%) focused on academic achievement, whereas loss-framed content focused on pregnancy (20/45, 44%) and HIV/AIDS (14/45, 31%). These preliminary data suggest that young adolescents may prefer a combination of gain- and loss-framing in health materials to promote reduction in sexual risk behaviors. PMID:24452229

Creation of biological module for self-regulating ecological system by the way of polymerization of composite materials in free space.

PubMed

Kondyurin, A; Lauke, B; Kondyurina, I; Orba, E

2004-01-01

The large-size frame of space ship and space station can be created with the use of the technology of the polymerization of fiber-filled composites and a liquid reactionable matrix applied in free space or on the other space body when the space ship or space station will be used during a long period of time. For the polymerization of the station frame the fabric impregnated with a long-life polymer matrix (prepreg) is prepared in terrestrial conditions and, after folding, can be shipped in a compact container to orbit and kept folded on board the station. In due time the prepreg is carried out into free space and unfolded. Then a reaction of matrix polymerization starts. After reaction of polymerization the durable frame is ready for exploitation. After that, the frame can be filled out with air, the apparatus and life support systems. The technology can be used for creation of biological frame as element of self regulating ecological system, and for creation of technological frame which can be used for a production of new materials on Earth orbit in microgravity conditions and on other space bodies (Mars, Moon, asteroids) for unique high price mineral extraction. Based on such technology a future space base on Earth orbit with volume of 10(6) m3 and a crew of 100 astronauts is considered. c2004 COSPAR. Published by Elsevier Ltd. All rights reserved.

108. View showing storage yard where material is received and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

108. View showing storage yard where material is received and sorted: also shows derrick framed to raise material from tracks and land on deck of approach. Material is then moved by narrow gage locomotive out to erection traveler. - Carquinez Bridge, Spanning Carquinez Strait at Interstate 80, Vallejo, Solano County, CA

Applying Psychology in Outer Space: Unfulfilled Promises Revisited.

ERIC Educational Resources Information Center

Helmreich, Robert L.

1983-01-01

Argues that research in personality and social psychology has an important role in the nation's spage program. Holds that psychologists' indifference and the structure of the National Aeronautics and Space Administration have led to underutilization of psychological data in space exploration. Presents suggestions for increasing psychology's role…

Criteria of Police Officer Performance.

ERIC Educational Resources Information Center

Baehr, Melany E.

The indifferent success in achieving the goal of reliable and valid police officer work performance measures has been attributed to the complexity of the job. This study explored reasons for unsatisfactory police performance evaluation, reviewing and integrating previous studies and new recently collected but not yet published data. Performance…

Tuning History: The French Experience

ERIC Educational Resources Information Center

Lamboley, Jean-Luc

2017-01-01

The paper shows that Tuning Project has generated indifference more than resistance within the French academic community. It proposes an analysis of the reasons of this situation: difficulties arising from Tuning itself, the resistance of the French academic tradition, the institutional inhibitors and facilitators. The impact of Tuning on French…

Masking the Feeling of Being Stupid.

ERIC Educational Resources Information Center

Smith, Sally L.

1988-01-01

Teaching experience at The Lab School of Washington has shown that learning-disabled children and adults cope with their lack of self-esteem and feelings of stupidity by developing masks to hide their hurt. These include masks of super-competence, helplessness, invisibility, clowning, injustice collecting, indifference, boredom, outrageousness,…

Student Authority: Antidote to Alienation

ERIC Educational Resources Information Center

Goodman, Joan

2010-01-01

The widespread disaffection of students from school is manifested in academic failure, indifference, and defiance. These problems can be alleviated, I argue, when an authority structure is developed that combines three components--freedom, power, and legitimacy. Authority understood as either power or freedom is apt to subvert students' school…

Making the Hidden Curriculum Visible: Sustainability Literacy in Higher Education

ERIC Educational Resources Information Center

Winter, Jennie; Cotton, Debby

2012-01-01

Despite strong political support for the development of sustainability literacy amongst the UK graduates, embedding sustainability in the higher education curriculum has met with widespread indifference, and in some cases, active resistance. However, opportunities exist beyond the formal curriculum for engaging students in learning about…

A Glue from Slug Slime?

ERIC Educational Resources Information Center

Buttemer, Helen A.

2009-01-01

"Yuuuck!" "Gross!" "Cool!" The response to slugs is never indifference. These slimy creatures are perfect for captivating students' imagination and curiosity, and they are ideal subjects to introduce investigative science. This article describes a classroom activity in which students design a research investigation to answer the question: "Is slug…

Design, Fabrication, and Calibration of an Embedded Piezoceramic Actuator for Active Control Applications

NASA Technical Reports Server (NTRS)

Koopmann, Gary H.; Lesieutre, George A.; Yoshikawa, Shoko; Chen, Weicheng; Fahnline, John B.; Pai, Suresh; Dershem, Brian

1996-01-01

In this presentation, the authors describe the design and fabrication processes for a PZT strain actuator that evolved during the initial stages of a research effort to synthesize and process intelligent, cost effective structures (SPICES). The actuator performance requirements were similar to those of conventional actuators, e.g., it had to be robust, highly efficient with adequate force and stroke, as lightweight as possible, and most importantly, affordable. Further, since the actuator was to be integrated within a composite structure, it had to be compatible with the host material and easily embeddable during the fabrication process. In control applications employing strain devices as actuators, a good bond between this actuator and host material is critical to their successful operation. This criterion is often difficult to achieve when attempting to join ceramics with metals or polymers with dissimilar properties such as Young's moduli, thermal expansion coefficients, etc. One unique feature of the actuator design that evolved in this project is that the need for direct bonding between the PZT ceramic and polymers was circumvented, i.e. the strain transfer to the host material was achieved via a frame surrounding the ceramic. Consequently, the frame material could be selected (or coated) for compatibility with the host material. A second feature is that the frame enclosed a co-fired, multilayered, PZT stack that was used to minimize the voltage requirements while maximizing the output strain.

The Stuff of Other Worlds

NASA Technical Reports Server (NTRS)

Stansbery, EIleen K.; Latner, Alexis Glynn

2000-01-01

Extraterrestrial material eternally rains down on Earth. Meteorites flare in the night sky. Cosmic rays plow into Earth's atmosphere, creating invisible bursts of secondary particles. These processes began when the Earth formed in the primordial solar system and have continued ever since, indifferent to the exceedingly recent presence of human intelligence. For us to seek out stuff of other worlds, in contrast, takes a great deal of determined ingenuity. First we have to send a spacecraft somewhere else in the solar system. Indigenous material has to be collected and then brought back to Earth without exposure to conditions that might significantly alter it. The material must undergo meaningful scientific analysis. Most important, part of the material is preserved intact for future investigations. Beginning with bringing back Moon rocks, and now moving onward in the form of new missions to capture the hot thin solar wind and cold thin atmosphere of comets, extraterrestrial sample return takes place on the cutting edge of scientific technology. Sample return is also the fulcrum of an energetic debate about how to do planetary science missions. Scientists and engineers are debating whether to rely on remote sensing and in situ analysis, or to plan missions to undertake sample return. The latter is definitely more expensive on a per mission basis, and is usually technologically more challenging. But for an initially high investment of money and technology, bringing the stuff of other worlds back to Earth yields an incomparable return in scientific results.

``Frames of Reference'' revisited

NASA Astrophysics Data System (ADS)

Steyn-Ross, Alistair; Ivey, Donald G.

1992-12-01

The PSSC teaching film, ``Frames of Reference,'' was made in 1960, and was one of the first audio-visual attempts at showing how your physical ``point of view,'' or frame of reference, necessarily alters both your perceptions and your observations of motion. The gentle humor and original demonstrations made a lasting impact on many audiences, and with its recent re-release as part of the AAPT Cinema Classics videodisc it is timely that we should review both the message and the methods of the film. An annotated script and photographs from the film are presented, followed by extension material on rotating frames which teachers may find appropriate for use in their classrooms: constructions, demonstrations, an example, and theory.

Framing global health: the governance challenge.

PubMed

McInnes, Colin; Kamradt-Scott, Adam; Lee, Kelley; Reubi, David; Roemer-Mahler, Anne; Rushton, Simon; Williams, Owain David; Woodling, Marie

2012-01-01

With the emergence of global health comes governance challenges which are equally global in nature. This article identifies some of the initial limitations in analyses of global health governance (GHG) before discussing the focus of this special supplement: the framing of global health issues and the manner in which this impacts upon GHG. Whilst not denying the importance of material factors (such as resources and institutional competencies), the article identifies how issues can be framed in different ways, thereby creating particular pathways of response which in turn affect the potential for and nature of GHG. It also identifies and discusses the key frames operating in global health: evidence-based medicine, human rights, security, economics and development.

Electric arc saw apparatus

DOEpatents

Deichelbohrer, Paul R [Richland, WA

1986-01-01

A portable, hand held electric arc saw has a small frame for supporting an electrically conducting rotary blade which serves as an electrode for generating an electric arc to erode a workpiece. Electric current is supplied to the blade by biased brushes and a slip ring which are mounted in the frame. A pair of freely movable endless belts in the form of crawler treads stretched between two pulleys are used to facilitate movement of the electric arc saw. The pulleys are formed of dielectric material to electrically insulate the crawler treads from the frame.

Photovoltaic module and module arrays

DOEpatents

Botkin, Jonathan; Graves, Simon; Lenox, Carl J. S.; Culligan, Matthew; Danning, Matt

2013-08-27

A photovoltaic (PV) module including a PV device and a frame, The PV device has a PV laminate defining a perimeter and a major plane. The frame is assembled to and encases the laminate perimeter, and includes leading, trailing, and side frame members, and an arm that forms a support face opposite the laminate. The support face is adapted for placement against a horizontal installation surface, to support and orient the laminate in a non-parallel or tilted arrangement. Upon final assembly, the laminate and the frame combine to define a unitary structure. The frame can orient the laminate at an angle in the range of 3.degree.-7.degree. from horizontal, and can be entirely formed of a polymeric material. Optionally, the arm incorporates integral feature(s) that facilitate interconnection with corresponding features of a second, identically formed PV module.

Photovoltaic module and module arrays

DOEpatents

Botkin, Jonathan [El Cerrito, CA; Graves, Simon [Berkeley, CA; Lenox, Carl J. S. [Oakland, CA; Culligan, Matthew [Berkeley, CA; Danning, Matt [Oakland, CA

2012-07-17

A photovoltaic (PV) module including a PV device and a frame. The PV device has a PV laminate defining a perimeter and a major plane. The frame is assembled to and encases the laminate perimeter, and includes leading, trailing, and side frame members, and an arm that forms a support face opposite the laminate. The support face is adapted for placement against a horizontal installation surface, to support and orient the laminate in a non-parallel or tilted arrangement. Upon final assembly, the laminate and the frame combine to define a unitary structure. The frame can orient the laminate at an angle in the range of 3.degree.-7.degree. from horizontal, and can be entirely formed of a polymeric material. Optionally, the arm incorporates integral feature(s) that facilitate interconnection with corresponding features of a second, identically formed PV module.

Do Parties' Ideological Positions Matter? The Effects of Alienation and Indifference on Individuals' Turnout Decisions

ERIC Educational Resources Information Center

Melton, James Douglas

2009-01-01

Both spatial theories of voting and our intuitions lead us to expect that political parties' ideological positions should affect individuals' turnout decisions. Contrary to these expectations, existing research finds that neither feelings of alienation--that no party adequately represents an individual's ideological position--nor…

Employee Performance and State Mental Health Manpower Development.

ERIC Educational Resources Information Center

McCullough, Paul M.

A project explored the manpower issue termed "burnout" and the impact of this phenomenon on mental health service programs. (In the framework of this study burnout is defined as that state of non-productivity, non-motivation, and indifference which interferes with a worker's delivering services effectively.) Existing literature does not clearly…

What If Grandma Moses Attended Night School? Strategies for Reprioritizing Adult Art Education.

ERIC Educational Resources Information Center

Edelson, Paul J.

Through their own inventiveness and persistence, adults are circumventing institutional indifference and creating alternative educational networks to teach themselves art. Problems that must be overcome are as follows: inadequate instructor preparation, a generally narrow array of programs in most community centers with the preponderance of…

Ammonia release method for depositing metal oxides

DOEpatents

Silver, Gary L.; Martin, Frank S.

1994-12-13

A method of depositing metal oxides on substrates which is indifferent to the electrochemical properties of the substrates and which comprises forming ammine complexes containing metal ions and thereafter effecting removal of ammonia from the ammine complexes so as to permit slow precipitation and deposition of metal oxide on the substrates.

Are There Really Patterns of Attachment? Comment on Fraley and Spieker (2003).

ERIC Educational Resources Information Center

Waters, Everett; Beauchaine, Theodore P.

2003-01-01

Focuses on three questions related to attachment theory: whether it requires distinct patterns of attachment, how taxonomic analysis contributes to understanding individual differences in attachment security, and whether attachment theorists are asking the right questions. Asserts that attachment theory is indifferent to the structure of…

Risky Choice in Pigeons and Humans: A Cross-Species Comparison

ERIC Educational Resources Information Center

Lagorio, Carla H.; Hackenberg, Timothy D.

2010-01-01

Pigeon and human subjects were given repeated choices between variable and adjusting delays to token reinforcement that titrated in relation to a subject's recent choice patterns. Indifference curves were generated under two different procedures: "immediate exchange," in which a token earned during each trial was exchanged immediately for access…

The Vanishing Black Family: Myth or Reality?

ERIC Educational Resources Information Center

Banks, Ivan W.

Recent media reports have characterized the black family as vanishing and being replaced by institutionalized chaos, indifference, and "benign neglect." Journalists point to the high rate of teen pregnancies and the increased proportions of black families headed by single women, and describe black men as having little regard for the role of…

The Risk of Indifference: From Partnership to Leadership.

ERIC Educational Resources Information Center

Whitmore, Kay R.

1989-01-01

Compares the problems faced in public education to those of U.S. industry during the past two decades. Points out that today's educational enterprise requires greater cooperation, communication, and commitment. Calls for the formation of a new partnership among education, business, and community. In place of separate reforms, advocates a new…

Safety, Dignity and the Quest for a Democratic Campus Culture

ERIC Educational Resources Information Center

Ben-Porath, Sigal

2016-01-01

In his excellent paper, Callan (2016) differentiates intellectual safety, which fosters smugness, indifference and lack of effort, from dignity safety, which is needed for participation, learning and engagement. He suggests that college classrooms that reject the first and espouse the second would be ones that focus on "cultivating…

What Can K-12 School Leaders Learn from Video Games and Gaming?

ERIC Educational Resources Information Center

Halverson, Richard

2005-01-01

Schools have much to learn from video games and the gaming community. By providing compelling activities for motivating otherwise indifferent learners, video games can potentially help teachers improve the design of learning environments. However, there are considerable rhetorical and practical barriers between the schooling and gaming communities…

"Entre Familia": Immigrant Parents' Strategies for Involvement in Children's Schooling

ERIC Educational Resources Information Center

Poza, Luis; Brooks, Maneka Deanna; Valdés, Guadalupe

2014-01-01

Teachers and administrators in schools with large, working-class Latino populations often complain of parents' indifference or lack of involvement in children's schooling because of their low visibility at school events and relatively little face-to-face communication with teachers and school administration. In a series of semi-structured…

Gender Difference or Indifference? Detective Decision Making in Sexual Assault Cases

ERIC Educational Resources Information Center

Alderden, Megan A.; Ullman, Sarah E.

2012-01-01

Prior research examining sexual assault case decision making has failed to account for the demographic characteristics of the criminal justice practitioners charged with making case decisions. Inclusion of such information is important because it provides researchers with a greater understanding of how criminal justice practitioners' own gender,…

Questioning the New Right's Diagnosis of Social Ills.

ERIC Educational Resources Information Center

Roberts, Clark G.

1981-01-01

States that the indifference of public policy to human rights issues is illustrated by severe budget cuts in essential program areas such as the National Institute for Mental Health, the Legal Services Corporation, school lunches, social security, and education for the handicapped. Considers strategies for minimizing destructive effects of current…

Esprit: A Humanities Magazine.

ERIC Educational Resources Information Center

Parker, Donald G.; Capella, Barry John

In March 1984, the first issue of "Esprit," a semi-annual humanities magazine for the 56 two-year colleges in New York State, was published. The magazine seeks to confront the apparent decline of student interest in the humanities, community doubts about the relevance of the humanities, and the seeming indifference to the special truths…

Saving Alma Mater: A Rescue Plan for America's Public Universities

ERIC Educational Resources Information Center

Garland, James C.

2009-01-01

America's public universities educate 80% of our nation's college students. But in the wake of rising demands on state treasuries, changing demographics, growing income inequality, and legislative indifference, many of these institutions have fallen into decline. Tuition costs have skyrocketed, class sizes have gone up, the number of courses…

College Students' Attitudes toward Elderly Sexuality: A Two Factor Solution.

ERIC Educational Resources Information Center

Hillman, Jennifer L.; Stricker, George

1996-01-01

Factor analysis of scores of 458 college students on the Aging Sexuality Knowledge and Attitude Scale revealed a two-factor structure. Religious affiliation and ethnicity uniquely predicted permissive/restrictive attitudes. Death anxiety and salience of elderly sexuality uniquely predicted empathic/indifferent attitudes. Students of different ages…

Numerical Estimation of Information Theoretic Measures for Large Data Sets

DTIC Science & Technology

2013-01-30

probability including a new indifference rule,” J. Inst. of Actuaries Students’ Soc. 73, 285–334 (1947). 7. M. Hutter and M. Zaffalon, “Distribution...Handbook of Mathematical Functions with Formulas, Graphs, and Mathematical Tables, Dover Publications, New York (1972). 13. K.B. Oldham et al., An Atlas

The Child's Right To Play.

ERIC Educational Resources Information Center

Guddemi, Marcy

Several factors are eroding children's right to play. The first is continuing poverty throughout the world. This factor is evident in underdeveloped countries and the inner cities of industrialized countries. Changing cultural values are a second factor in developed societies where indifference toward the importance of play is prevalent. The many…

Long-Term Outcome in Children with Temporal Lobe Seizures. II: Marriage, Parenthood and Sexual Indifference.

ERIC Educational Resources Information Center

Lindsay, Janet; And Others

1979-01-01

Among the findings were that female survivors, if not totally handicapped, were nearly all married; whereas surviving males who were not totally handicapped more often remained single. Journal availability: J. B. Lippincott Co., E. Washington Sq., Philadelphia, PA 19105. (Author/DLS)

Nasal Electrophoresis

DTIC Science & Technology

1960-10-06

wadding turundaf? into the n^sal cavity, the location of the indifferent electrode in the region of the occipital ’foramen, etc.)« On the "basis of our... neuralgias öf the trieeKinal nerve. In these cases we use Ionisation with a solution of novocaine (4$) and dijnedrol (0.5*) according to the; second

Dilemmas of Japanese Defense.

ERIC Educational Resources Information Center

Kiyoshi, Nasu

1978-01-01

Traces Japan's attitude toward and preparation for national defense from the 1930s to 1978. Topics discussed include Japan's indifference to defense since World War II, America's responsibility to defend Japan in case of military attack, the possibility of a Soviet attack on Japan, and public opinion about defense in Japan. Journal availability:…

Energy Education in the Curriculum.

ERIC Educational Resources Information Center

Stubbs, M.

1985-01-01

This study showed that the coverage of energy varies considerably among secondary schools in Great Britain and that British students lack a clear knowledge of energy issues in general and nuclear energy in particular, are indifferent to conservation, and are reluctant to accept nuclear power. Energy education must be given greater emphasis.…

[Self-neglect as a sign of decompensation].

PubMed

Jean-Louis, Eric

2015-01-01

A lack of hygiene to which the patient appears indifferent, self-neglect can be a sign of the decompensation of a mental pathology. This article presents the case of a patient who, after several months of stabilisation and a return home to a relatively clean environment, reactivates a delusion of persecution.

Hostility or Indifference? The Marginalization of Homeschooling in the Education Profession

ERIC Educational Resources Information Center

Howell, Charles

2013-01-01

Reasons for neglect of homeschooling in educational research literature are explored. The ideological hostility that occasionally surfaces in policy debates is unlikely to have a major influence on mainstream researchers. An alternative explanation based on Kuhn's concept of normal science is proposed. The dominant paradigm of educational research…

Analyzing the Communication Dynamics of Political Campaigns

ERIC Educational Resources Information Center

Tannenbaum, Sally

2007-01-01

It is widely agreed that college students do not fully participate in the political process. The most commonly cited reasons are apathy, indifference, and ignorance. This article presents an activity that aims to help students learn about communication dynamics in the context of political campaigns and develop an appreciation and confidence about…

Public Service or Educational Television? Information Policies in a Competitive Broadcasting System.

ERIC Educational Resources Information Center

Baldi, Paolo

This paper discusses from a historical perspective past shortcomings of public service television with its protective information policies, indifference to audiovisual language, absence of diversity in journalistic thematic choices, and "boring" style of television reporting. It is argued that there has been a substantial lack of concern…

From Injustice to Indifference: The Politics of School Violence.

ERIC Educational Resources Information Center

Michaelis, Karen L.

Understanding and addressing the social structures that give rise to student violence require educators, parents, and society at large to adopt a critical, feminist perspective focusing on injustice and incorporating perspectives of marginalized students. Because practices of social groups play a critical role in self-identity, the violent actions…

An Examination of Organizations' Frontline Service Employee Development Practices

ERIC Educational Resources Information Center

Ellinger, Alexander E.; Elmadag, Ayse Banu; Ellinger, Andrea D.

2007-01-01

Firms with the ability to provide superior customer service can accrue significant competitive advantage and research suggests that frontline service employees' (FLSEs) actions have a considerable influence on the success of service operations. Yet, the high level of customer defections consistently attributed to poor and indifferent service…

Electro-active device using radial electric field piezo-diaphragm for sonic applications

NASA Technical Reports Server (NTRS)

Bryant, Robert G. (Inventor); Fox, Robert L. (Inventor)

2005-01-01

An electro-active transducer for sonic applications includes a ferroelectric material sandwiched by first and second electrode patterns to form a piezo-diaphragm coupled to a mounting frame. When the device is used as a sonic actuator, the first and second electrode patterns are configured to introduce an electric field into the ferroelectric material when voltage is applied to the electrode patterns. When the device is used as a sonic sensor, the first and second electrode patterns are configured to introduce an electric field into the ferroelectric material when the ferroelectric material experiences deflection in a direction substantially perpendicular thereto. In each case, the electrode patterns are designed to cause the electric field to: i) originate at a region of the ferroelectric material between the first and second electrode patterns, and ii) extend radially outward from the region of the ferroelectric material (at which the electric field originates) and substantially parallel to the plane of the ferroelectric material. The mounting frame perimetrically surrounds the peizo-diaphragm and enables attachment of the piezo-diaphragm to a housing.

Recycling-oriented characterization of plastic frames and printed circuit boards from mobile phones by electronic and chemical imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Palmieri, Roberta; Bonifazi, Giuseppe; Serranti, Silvia, E-mail: silvia.serranti@uniroma1.it

Highlights: • A recycling oriented characterization of end-of-life mobile phones was carried out. • Characterization was developed in a zero-waste-perspective, aiming to recover all the mobile phone materials. • Plastic frames and printed circuit boards were analyzed by electronic and chemical imaging. • Suitable milling/classification strategies were set up to define specialized-pre-concentrated-streams. • The proposed approach can improve the recovery of polymers, base/precious metals, rare earths and critical raw materials. - Abstract: This study characterizes the composition of plastic frames and printed circuit boards from end-of-life mobile phones. This knowledge may help define an optimal processing strategy for using thesemore » items as potential raw materials. Correct handling of such a waste is essential for its further “sustainable” recovery, especially to maximize the extraction of base, rare and precious metals, minimizing the environmental impact of the entire process chain. A combination of electronic and chemical imaging techniques was thus examined, applied and critically evaluated in order to optimize the processing, through the identification and the topological assessment of the materials of interest and their quantitative distribution. To reach this goal, end-of-life mobile phone derived wastes have been systematically characterized adopting both “traditional” (e.g. scanning electronic microscopy combined with microanalysis and Raman spectroscopy) and innovative (e.g. hyperspectral imaging in short wave infrared field) techniques, with reference to frames and printed circuit boards. Results showed as the combination of both the approaches (i.e. traditional and classical) could dramatically improve recycling strategies set up, as well as final products recovery.« less

Layered Structural Co-Based MOF with Conductive Network Frames as a New Supercapacitor Electrode.

PubMed

Yang, Jie; Ma, Zhihua; Gao, Weixue; Wei, Mingdeng

2017-01-12

Layered structural Co-MOF nanosheets were synthesized and then used as an electrode material for supercapacitors for the first time. This material exhibited a high specific capacitance, a good rate capability, and an excellent cycling stability. A maximum capacitance of 2564 F g -1 can be achieved at a current density of 1 Ag -1 . Moreover, the capacitance retention can be kept at 95.8 % respectively of its initial value after 3000 cycles. To the best of our knowledge, both the specific capacitance and the capacitance retention were the highest values reported for MOF materials as supercapacitor electrodes until now. Such a high supercapacitive performance might be attributed to the intrinsic characteristics of this kind of Co-MOF material, including its layered structure, conductive network frame, and thin nanosheet. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Finite Element Analysis of Composite Aircraft Fuselage Frame

NASA Astrophysics Data System (ADS)

Dandekar, Aditya Milind

Composites have been introduced in aircraft industries, for their stronger, stiffer, and lighter properties than their metal-alloys counterparts. The general purpose of an aircraft is to transport commercial or military payload. Aircraft frames primarily maintains the shape of fuselage and prevent instability of the structure. Fuselage is similar as wing in construction which consist of longitudinal elements (longerons and stringers), transverse elements (frames and bulkheads) and its external skin. The fuselage is subjected to forces such as the wing reactions, landing gear reaction, empennage reaction, inertia forces subjected due to size and weight, internal pressure forces due to high altitude. Frames also ensure fail-safe design against skin crack propagation due to hoops stress. Ideal fuselage frames cross section is often circular ring shape with a frame cap of Z section. They are mainly made up of light alloy commonly used is aluminium alloys such as Al-2024, Al-7010, Al-7050, Al-7175. Aluminium alloys have good strength to density ratios in compression and bending of thin plate. A high strength to weight ratio of composite materials can result in a lighter aircraft structure or better safety factor. This research focuses on analysis of fuselage frame under dynamic load condition with change in material. Composites like carbon fibre reinforced plastics [CFRP] and glass fibre reinforced plastics [GFRP] are compared with traditional aluminium alloy Al-7075. The frame is subjected to impact test by dropping it at a velocity of 30 ft. / secs from a height of 86 inch from its centre of gravity. These parameters are considered in event of failure of landing gear, and an aircraft is subject to belly landing or gear-up landing. The shear flow is calculated due to impact force which acts in radial direction. The frame is analysed under static structural and explicit dynamic load conditions. Geometry is created in ANSYS Design Modeler. Analysis setup is created using ANSYS Explicit Dynamic (AUTODYN) and ANSYS Composite PrepPost (ACP-Pre) modules. Shear flow and Stress Flow equations are solved by generating a MATLAB code.

Space Technology for the Fire Department

NASA Technical Reports Server (NTRS)

1986-01-01

A National Bureau of Standards/NASA project directed by Johnson resulted in a lightweight breathing system including face mask, frame, harness and air bottle marketed by Scott Aviation. Aluminum composite material was used; frame and harness were easier to put on and take off. Today every major manufacturer of breathing apparatus incorporates NASA technology in some form, and inhalation injuries have been reduced.

Visible camera imaging of plasmas in Proto-MPEX

NASA Astrophysics Data System (ADS)

Mosby, R.; Skeen, C.; Biewer, T. M.; Renfro, R.; Ray, H.; Shaw, G. C.

2015-11-01

The prototype Material Plasma Exposure eXperiment (Proto-MPEX) is a linear plasma device being developed at Oak Ridge National Laboratory (ORNL). This machine plans to study plasma-material interaction (PMI) physics relevant to future fusion reactors. Measurements of plasma light emission will be made on Proto-MPEX using fast, visible framing cameras. The cameras utilize a global shutter, which allows a full frame image of the plasma to be captured and compared at multiple times during the plasma discharge. Typical exposure times are ~10-100 microseconds. The cameras are capable of capturing images at up to 18,000 frames per second (fps). However, the frame rate is strongly dependent on the size of the ``region of interest'' that is sampled. The maximum ROI corresponds to the full detector area, of ~1000x1000 pixels. The cameras have an internal gain, which controls the sensitivity of the 10-bit detector. The detector includes a Bayer filter, for ``true-color'' imaging of the plasma emission. This presentation will exmine the optimized camera settings for use on Proto-MPEX. This work was supported by the US. D.O.E. contract DE-AC05-00OR22725.

Life comparative analysis of energy consumption and CO₂ emissions of different building structural frame types.

PubMed

Kim, Sangyong; Moon, Joon-Ho; Shin, Yoonseok; Kim, Gwang-Hee; Seo, Deok-Seok

2013-01-01

The objective of this research is to quantitatively measure and compare the environmental load and construction cost of different structural frame types. Construction cost also accounts for the costs of CO₂ emissions of input materials. The choice of structural frame type is a major consideration in construction, as this element represents about 33% of total building construction costs. In this research, four constructed buildings were analyzed, with these having either reinforced concrete (RC) or steel (S) structures. An input-output framework analysis was used to measure energy consumption and CO₂ emissions of input materials for each structural frame type. In addition, the CO₂ emissions cost was measured using the trading price of CO₂ emissions on the International Commodity Exchange. This research revealed that both energy consumption and CO₂ emissions were, on average, 26% lower with the RC structure than with the S structure, and the construction costs (including the CO₂ emissions cost) of the RC structure were about 9.8% lower, compared to the S structure. This research provides insights through which the construction industry will be able to respond to the carbon market, which is expected to continue to grow in the future.

Application study of filamentary composites in a commercial jet aircraft fuselage

NASA Technical Reports Server (NTRS)

Johnson, R. W.; June, R. R.

1972-01-01

A study of applications of filamentary composite materials to aircraft fuselage structure was performed. General design criteria were established and material studies conducted using the 727-200 forebody as the primary structural component. Three design approaches to the use of composites were investigated: uniaxial reinforcement of metal structure, uniaxial and biaxial reinforcement of metal structure, and an all-composite design. Materials application studies for all three concepts were conducted on fuselage shell panels, keel beam, floor beams, floor panels, body frames, fail-safe straps, and window frames. Cost benefit studies were conducted and developmental program costs estimated. On the basis of weight savings, cost effectiveness, developmental program costs, and potential for early application on commercial aircraft, the unaxial design is recommended for a 5-year flight service evaluation program.

Screening of antibacterial effects of anise essential oil alone and in combination with conventional antibiotics against Streptococcus pneumoniae clinical isolates.

PubMed

Gradinaru, Adina Catinca; Miron, Anca; Trifan, Adriana; Spac, A; Brebu, M; Aprotosoaie, Ana Clara

2014-01-01

This study aimed to investigate the effects of anise essential oil alone and in combination with conventional antibiotics (amoxicillin, ciprofloxacin) against Streptococcus pneumoniae clinical isolates. MATERIAL AND METHODs: Anise essential oil (AEO) was isolated by hydrodistillation from dried powdered fruits. Its chemical composition was investigated by GC-MS and GC-FID. Broth dilution assay was used to evaluate the antibacterial effects of anise essential oil. The interactions with antibiotics were studied by the checkerboard assay. Trans-anethole (90.18%) was identified as major constituent in anise essential oil. Almost all combinations AEO-amoxicillin and AEO-ciprofloxacin showed indifferent interactions (1 < FIC index < or = 2). Positive interactions (addition and weak synergism) were found only for four combinations AEO-amoxicillin (FIC index = 1,0.62, 0.75 and 0.5) and one combination AEO-ciprofloxacin (FIC index = 0.62). Herbal products containing anise essential oil may be used as expectorants in combination with amoxicillin or ciprofloxacin in Streptococcus pneumoniae infections without diminishing antibiotic efficacy.

Radiation impact on the characteristics of optical glasses test results on a selected set of materials

NASA Astrophysics Data System (ADS)

Fruit, Michel; Gussarov, Andrei; Berghmans, Francis; Doyle, Dominic; Ulbrich, Gerd

2017-11-01

It is well known within the Space optics community that radiation may significantly affect transmittance of glasses. To overcome this drawback, glass manufacturers have developed Cerium doped counterparts of classical glasses. This doped glasses display much less transmittance sensitivity to radiation. Still, the impact of radiation on refractive index is less known and may affect indifferently classical or Cerium doped glasses. ESTEC has initialised an R&D program with the aim of establishing a comprehensive data base gathering radiation sensitivity data, called Dose coefficients, for all the glass optical parameters (transmittance / refractive index / compaction……). The first part of this study, to define the methodology for such a data base, is run by ASTRIUM SAS in co-operation with SCK CEN. This covers theoretical studies associated to testing of a selected set of classical and "radiation hardened" glasses. It is proposed here to present first the theoretical backgrounds of this study and then to give results which have been obtained so far.

Dynamic Deformation Properties of Energetic Composite Materials

DTIC Science & Technology

2005-04-01

Whitley 189 (rotating mirror, 25 frames) up to 4 x 106 s-1 Hadland Imacon 792 (8 full or up to 24 half frames) up to 107 s-1 or streak IMCO Ultranac...CAVENDISH LABORATORY Material Density/kg m-3 Wave Speed/m s-1 Impedance/kgm-2 s-1 Magnesium 1798 4920 8.85x106 AZM Dural 2711 5040 13.7 x 106 Ti6Al4V 4418...4840 21.4 x 106 Stainless steel 7835 4842 37.9 x 106 Maraging steel 8080 4830 39.1 x 106 Inconel 718 8269 4980 41.3 x 106 Tungsten 16900 4406 75.3 x 106

Lightweight design of automobile frame based on magnesium alloy

NASA Astrophysics Data System (ADS)

Lyu, R.; Jiang, X.; Minoru, O.; Ju, D. Y.

2018-06-01

The structural performance and lightweighting of car base frame design is a challenging task due to all the performance targets that must be satisfied. In this paper, three kinds of materials (iron, aluminum and magnesium alloy) replacement along with section design optimization strategy is proposed to develop a lightweight car frame structure to satisfy the tensile and safety while reducing weight. Two kinds of cross-sections are considered as the design variables. Using Ansys static structure, the design optimization problem is solved, comparing the results of each step, structure of the base flame is optimized for lightweight.

Design of the forward straw tube tracker for the PANDA experiment

NASA Astrophysics Data System (ADS)

Smyrski, J.; Apostolou, A.; Biernat, J.; Czyżycki, W.; Filo, G.; Fioravanti, E.; Fiutowski, T.; Gianotti, P.; Idzik, M.; Korcyl, G.; Korcyl, K.; Lisowski, E.; Lisowski, F.; Płażek, J.; Przyborowski, D.; Przygoda, W.; Ritman, J.; Salabura, P.; Savrie, M.; Strzempek, P.; Swientek, K.; Wintz, P.; Wrońska, A.

2017-06-01

The design of the Forward Tracker for the Forward Spectrometer of the PANDA experiment is described. The tracker consists of 6 tracking stations, each comprising 4 planar double layers of straw tube detectors, and has a total material budget of only 2% X0. The straws are made self-supporting by a 1 bar over-pressure of the working gas mixture (Ar/CO2). This allows to use lightweight and compact rectangular support frames for the double layers and to split the frames into pairs of C-shaped half-frames for an easier installation on the beam line.

Preparation and Use of Polish Mushroom Proficiency Testing Materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Polkowska-Motrenko, Halina

2008-08-14

Mushroom reference materials have been prepared and characterized for the use in proficiency tests according to a procedure established within the frame of an IAEA Interregional Technical Cooperation Project. The materials were used for conducting the proficiency tests in Poland in 2005-2007. The results obtained by participating laboratories are presented and discussed.

Myths and Realities of Tribal Education in Jammu and Kashmir: An Exploratory Study

ERIC Educational Resources Information Center

Gul, Showkeen Bilal Ahmad; Ganai, M. Y.

2016-01-01

Education is the key to developmental process and also influences demographic behaviour. Jammu and Kashmir is homeland to a number of tribal communities with diverse eco-cultural, socio-economic and geographical backgrounds. These Scheduled Tribes experience passive indifference that takes the form of exclusion from educational opportunities and…

Ammonia release method for depositing metal oxides

DOEpatents

Silver, G.L.; Martin, F.S.

1994-12-13

A method is described for depositing metal oxides on substrates which is indifferent to the electrochemical properties of the substrates and which comprises forming ammine complexes containing metal ions and thereafter effecting removal of ammonia from the ammine complexes so as to permit slow precipitation and deposition of metal oxide on the substrates. 1 figure.

A deconstruction of the I-M-L commitment segmentation of forest recreationists

Treesearch

James D. Absher; Gerard T. Kyle

2007-01-01

Previous work has established the general utility of segmenting forest recreationists according to their commitment profiles into Indifferents, Moderates, and Loyalists (IML) groups. Observed differences between these segments suggest that place identity and affect are more central to management than previously thought. This study extends this finding through the use...

Labelling Angles: Care, Indifference and Mathematical Symbols

ERIC Educational Resources Information Center

Long, Julie

2011-01-01

In this article, I explore tensions of care in the context of school mathematics by examining two accounts of a classroom moment involving labelling an angle. In particular, I draw attention to how caring for students and caring for mathematical ideas interplay in complex ways by inquiring into the two accounts through ideas of care and…

Why Kids Don't Like Social Studies.

ERIC Educational Resources Information Center

Schug, Mark C.; And Others

A survey of 6th and 12th grade students in a Midwest school district reveals largely indifferent or negative attitudes toward social studies subjects. Forty-six students responded to questions which asked them to name the most important, favorite, and least favorite subjects and to recall what was interesting and uninteresting in former social…

Adventures from Justin's Life: Engaging Your Physics Students

ERIC Educational Resources Information Center

Ridgley, James A., Jr.; Herron, Sherry S.

2018-01-01

Many teachers have had students ask the proverbial question, "When will I ever use this in my life?" In the sciences, especially physics, teachers seem to battle this torrent of indifference continually. Although many areas of our students' lives can distract them from their academic pursuits, we as teachers must be introspective in…

Teacher Burnout. Information Capsule. Volume 1003

ERIC Educational Resources Information Center

Blazer, Christie

2010-01-01

Burnout is a state of physical, mental, and emotional exhaustion resulting from chronic stress. It is characterized by feelings of alienation, indifference, and low self-regard, a loss of interest in work, and an inability to perform one's day-to-day job duties. Burnout within the teaching profession has been recognized as a serious problem.…

Like Father, Like Son? The Link between Parents' Moral Disengagement and Children's Externalizing Behaviors

ERIC Educational Resources Information Center

Camodeca, Marina; Taraschi, Emanuela

2015-01-01

This work considers a still uninvestigated research issue-namely, whether parents' moral disengagement affected preschool children's externalizing behavior. Participants were 245 children (126 girls and 119 boys) aged 3-6 years. Parents' moral disengagement was assessed in terms of their externalization of blame and their indifference in reactions…

FACTS AND IRONIES OF THE WATER SITUATION IN THE SOUTHWEST.

ERIC Educational Resources Information Center

KNOWLTON, CLARK S.

THE SOUTHWEST IS SEEN AS A REGION LONG DOMINATED BY RANCHING, MINING, AND IRRIGATED AGRICULTURE. RAPID URBANIZATION AND INDUSTRIALIZATION IS RESULTING IN WATER PROBLEMS SIGNIFICANT TO A SOCIOCULTURAL AND A PHYSICAL ENVIRONMENT. THE FIRST GROUP OF PROBLEMS IS CHARACTERIZED BY INDIFFERENCES TO DROUGHT AND WATER DEPLETION POTENTIAL SINCE WATER USERS…

The Conditioning of Counter Empathy toward In-Group and Out-Group Members.

ERIC Educational Resources Information Center

Englis, Basil G.

Research has shown that observers' vicarious emotional reactions to an in-group member's facial display of pleasure and pain are highly differentiated and empathetic, while responses to the expressive displays of an out-group member are relatively undifferentiated and indifferent. This study examines the effects of perceived group membership on…

The Couples Emotion Rating Form: Psychometric Properties and Theoretical Associations

ERIC Educational Resources Information Center

Sanford, Keith

2007-01-01

The Couples Emotion Rating Form assesses 3 types of negative emotion that are salient during times of relationship conflict. Hard emotion includes feeling angry and aggravated, soft emotion includes feeling hurt and sad, and flat emotion includes feeling bored and indifferent. In Study 1, scales measuring hard and soft emotion were validated by…

Breaking Silence: Educating Citizens for Love, Care and Solidarity

ERIC Educational Resources Information Center

Lynch, Kathleen; Lyons, Maureen; Cantillon, Sara

2007-01-01

An indifference to the affective domain and an allegiance to the education of the rational autonomous subject and public citizen are at the heart of formal education. The impact of Cartesian rationalism is intensifying with the glorification of performativity measured by league tables and rankings. The citizen carer and the care recipient citizen…

Magic, Morals and Health

ERIC Educational Resources Information Center

Johnson, Warren R.

2010-01-01

Magic has to do with the supernatural and the unnatural. It is indifferent to natural law and science and is aloof from scientific inquiry. Its existence depends upon unquestioning faith. Granted such faith, it is extraordinarily potent. If it does not move mountains, it convinces the faithful that it can. It can damage health and perhaps, restore…

How the Courts Deal with Bullying in Schools

ERIC Educational Resources Information Center

Diamantes, Thomas

2010-01-01

School officials have a difficult time dealing with cases of bullying. Often, it is one student's word against another. Also, many victims of bullying are reluctant to report instances for fear of retribution. As in sexual harassment cases, school officials need to be seen doing something about the problem. Courts view indifference to these…

Opportunities to improve monitoring of temporal trends with FIA panel data

Treesearch

Raymond Czaplewski; Michael Thompson

2009-01-01

The Forest Inventory and Analysis (FIA) Program of the Forest Service, Department of Agriculture, is an annual monitoring system for the entire United States. Each year, an independent "panel" of FIA field plots is measured. To improve accuracy, FIA uses the "Moving Average" or "Temporally Indifferent" method to combine estimates from...

Improving Career Exploration Using Psychometric Technology.

ERIC Educational Resources Information Center

Wegner, Kenneth W.

In most interest inventories, a single stimulus item is presented and the respondent indicates a preference in terms of degree of like, dislike, or indifference. This approach provides normative scales with scores that may be compared with various group distributions. The forced choice of options adds to the score on the scale for option selected…

Children's Needs in the 70's: A Federal Perspective.

ERIC Educational Resources Information Center

Zigler, Edward

A national indifference to children is indicated by the system of foster child care and by the treatment of mental retardates. Another manifestation is the attack on Head Start. Criticism based on the program's failure to raise standardized intelligence or aptitude scores is misplaced. Head Start is a broad developmental program having many…

Primary Prevention in Appalachian Kentucky: Peer Reinforcement of Classroom Attendance

ERIC Educational Resources Information Center

Noonan, J. Robert; Thibeault, Robert

1974-01-01

Peers chosen on the basis of their popularity and positive involvement in the educational process were found to be effective enhancers of attendance for chronic absentees. The judicious use of situational and interpersonal reinforcement can modify a student's behavior even in a region as indifferent to education as Appalachia. (EH)

In/Difference in the Neoliberalised University

ERIC Educational Resources Information Center

Petersen, Eva Bendix; Davies, Bronwyn

2010-01-01

In this article the authors take up the invitation to respond to the previous articles in the special issue. They discuss why it is so difficult to speak and write about gender and sexuality, and difference more generally, in the neoliberalised university. They make the case that the neoliberal university engages and uses categorical difference,…

Reading Desire: From Empathy to Estrangement, from Enlightenment to Implication

ERIC Educational Resources Information Center

Taylor, Lisa K.

2007-01-01

The imperial hubris, insecurities and indifference of our bloody new millennium pose profound challenges to feminist anti-racist and anti-colonial educators. For those of us who turn to literature education to create spaces of sustained moral reflection, there is a particular challenge to think through the kinds of reading practices which might…

Making Feminism Matter: The Revitalization of a Campus Women's Center.

ERIC Educational Resources Information Center

Miller, Alice

1988-01-01

Describes the revitalization of the Brooklyn College Women's Center, a 10-year-old women's center experiencing the effects of the conservative 1980s. Discusses the challenge of making feminism matter to young women who may be suspicious or indifferent, or who may not have identified their needs as "women's issues." (NB)

On a Certain Emotional Blindness in Human Beings.

ERIC Educational Resources Information Center

Scheibe, Karl E.

While human emotions are often considered instinctive, this paper examines the notion that indifference to events or circumstances which might seem to have a prima facie claim to emotional significance is related to the narrative construction of those events or circumstances in the life of the observer, and is not a result of absolute stimulus…

The Quality of Teaching in Higher Education

ERIC Educational Resources Information Center

Stake, Robert E.; Cisneros-Cohernour, Edith J.

2004-01-01

Campus teaching is not independent of campus politics. Quality of teaching is partly a function of who cares. The complexity of the disciplines taught is not justification for indifference to the needs of students--and the needs of the public, and the state, and the campus administrative offices, and the instructors. Teaching is not merely a…

Teacher Reform in Indonesia: Can Offshore Programs Create Lasting Pedagogical Shift?

ERIC Educational Resources Information Center

Allen, William; Hyde, Mervyn; Whannel, Robert; O'Neill, Maureen

2018-01-01

Regional and national interest in reforming teaching in Indonesia has seen governments, NGOs and education specialists combine to drive pedagogical changes among school teachers there. Results of these programs have been indifferent at best. This paper reports on teacher reform programs in Provinsi Papua, one of the most marginal societies in…

Disability and Inclusive Education in Times of Austerity

ERIC Educational Resources Information Center

Veck, Wayne

2014-01-01

When communities fall into decline, disabled people can find themselves alone and invisible in a society of indifferent individuals. Arendt offers an account of such a time in her discussion of the rise of a society of mass labouring and consuming. Bauman's insights into the fragmentation of life, in which established norms, traditional ties and…

Revisiting E-Learning Effectiveness: Proposing a Conceptual Model

ERIC Educational Resources Information Center

Macgregor, George; Turner, James

2009-01-01

Purpose: The use of e-learning is largely predicated upon the assumption that it can facilitate improvements in student learning and therefore can be more effective than conventional techniques. This assumption has been supported by some in the literature but has been questioned by a continuing body of contrary or indifferent evidence. The purpose…

Ten Years after Columbine: The Tragedy of Youth Deepens

ERIC Educational Resources Information Center

Giroux, Henry A.

2009-01-01

For young people it just gets worse. Ten years after the Columbine tragedy, the debate over school safety has clearly shown that educators, parents, politicians, and the mainstream media have created the conditions in which young people have increasingly become the victims of adult mistreatment, indifference, neglect, even violence. The tragic…

Do Adjusting-Amount and Adjusting-Delay Procedures Produce Equivalent Estimates of Subjective Value in Pigeons?

ERIC Educational Resources Information Center

Green, Leonard; Myerson, Joel; Shah, Anuj K.; Estle, Sara J.; Holt, Daniel D.

2007-01-01

The current experiment examined whether adjusting-amount and adjusting-delay procedures provide equivalent measures of discounting. Pigeons' discounting on the two procedures was compared using a within-subject yoking technique in which the indifference point (number of pellets or time until reinforcement) obtained with one procedure determined…

Grasping the Social through Movies

ERIC Educational Resources Information Center

Kennedy, Nilgun Fehim; Senses, Nazli; Ayan, Pelin

2011-01-01

In Turkey, one of the major challenges that university education faces is the indifference of young people towards social issues. The aim of this article is to contribute to the "practice" of critical pedagogy by proposing that showing movies is an important critical teaching method with the power both to give pleasure to the students…

Understanding Health Information Seeking: A Test of the Risk Perception Attitude Framework.

PubMed

Grasso, Katherine L; Bell, Robert A

2015-01-01

The authors used the Risk Perception Attitude framework, which is grounded in the Extended Parallel Process Model, to predict people's intentions to seek health information. In an online survey, 689 participants recruited from a crowdsource website were queried about their anticipated health information seeking, perceived risk, and efficacy in response to four scenarios pertaining to hypertension, hypercholesterolemia, alcohol dependence, and diabetes. Each participant was categorized for each scenario as responsive (higher risk, higher efficacy), avoidant (higher risk, lower efficacy), proactive (lower risk, higher efficacy), or indifferent (lower risk, lower efficacy). As predicted, responsive individuals were more likely to seek information than avoidant individuals, but only in three of the four scenarios. Also as expected, there was no difference between proactive and indifferent individuals' likelihood of seeking health information for any scenario. Risk and efficacy, while significant predictors of anticipated health information seeking, left much of the variance unexplained. An analysis of the reasons for information seeking and nonseeking among nonconforming cases suggests that a wider range of influences on health information seeking should be investigated, including curiosity, prior knowledge, social expectations, and situational norms.

Profile and effects of consumer involvement in fresh meat.

PubMed

Verbeke, Wim; Vackier, Isabelle

2004-05-01

This study investigates the profile and effects of consumer involvement in fresh meat as a product category based on cross-sectional data collected in Belgium. Analyses confirm that involvement in meat is a multidimensional construct including four facets: pleasure value, symbolic value, risk importance and risk probability. Four involvement-based meat consumer segments are identified: straightforward, cautious, indifferent, and concerned. Socio-demographic differences between the segments relate to gender, age and presence of children. The segments differ in terms of extensiveness of the decision-making process, impact and trust in information sources, levels of concern, price consciousness, claimed meat consumption, consumption intention, and preferred place of purchase. The two segments with a strong perception of meat risks constitute two-thirds of the market. They can be typified as cautious meat lovers versus concerned meat consumers. Efforts aiming at consumer reassurance through quality improvement, traceability, labelling or communication may gain effectiveness when targeted specifically to these two segments. Whereas straightforward meat lovers focus mainly on taste as the decisive criterion, indifferent consumers are strongly price oriented.

The recognition of graphical patterns invariant to geometrical transformation of the models

NASA Astrophysics Data System (ADS)

Ileană, Ioan; Rotar, Corina; Muntean, Maria; Ceuca, Emilian

2010-11-01

In case that a pattern recognition system is used for images recognition (in robot vision, handwritten recognition etc.), the system must have the capacity to identify an object indifferently of its size or position in the image. The problem of the invariance of recognition can be approached in some fundamental modes. One may apply the similarity criterion used in associative recall. The original pattern is replaced by a mathematical transform that assures some invariance (e.g. the value of two-dimensional Fourier transformation is translation invariant, the value of Mellin transformation is scale invariant). In a different approach the original pattern is represented through a set of features, each of them being coded indifferently of the position, orientation or position of the pattern. Generally speaking, it is easy to obtain invariance in relation with one transformation group, but is difficult to obtain simultaneous invariance at rotation, translation and scale. In this paper we analyze some methods to achieve invariant recognition of images, particularly for digit images. A great number of experiments are due and the conclusions are underplayed in the paper.

V-TECS Guide for Carpenter.

ERIC Educational Resources Information Center

Moore, Charles G.; And Others

This curriculum guide provides materials for a nine-duty course in carpentry. The nine duties are estimating materials, preparing building site, sharpening tools, building and installing foundation forms, installing rough framing, installing roof components, installing exterior finishes, installing interior finishes, and assembling and…

Prediction of seismic collapse risk of steel moment frame mid-rise structures by meta-heuristic algorithms

NASA Astrophysics Data System (ADS)

Jough, Fooad Karimi Ghaleh; Şensoy, Serhan

2016-12-01

Different performance levels may be obtained for sideway collapse evaluation of steel moment frames depending on the evaluation procedure used to handle uncertainties. In this article, the process of representing modelling uncertainties, record to record (RTR) variations and cognitive uncertainties for moment resisting steel frames of various heights is discussed in detail. RTR uncertainty is used by incremental dynamic analysis (IDA), modelling uncertainties are considered through backbone curves and hysteresis loops of component, and cognitive uncertainty is presented in three levels of material quality. IDA is used to evaluate RTR uncertainty based on strong ground motion records selected by the k-means algorithm, which is favoured over Monte Carlo selection due to its time saving appeal. Analytical equations of the Response Surface Method are obtained through IDA results by the Cuckoo algorithm, which predicts the mean and standard deviation of the collapse fragility curve. The Takagi-Sugeno-Kang model is used to represent material quality based on the response surface coefficients. Finally, collapse fragility curves with the various sources of uncertainties mentioned are derived through a large number of material quality values and meta variables inferred by the Takagi-Sugeno-Kang fuzzy model based on response surface method coefficients. It is concluded that a better risk management strategy in countries where material quality control is weak, is to account for cognitive uncertainties in fragility curves and the mean annual frequency.

ETR HEAT EXCHANGER BUILDING, TRA644. METAL FRAME OF BUILDING GOES ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ETR HEAT EXCHANGER BUILDING, TRA-644. METAL FRAME OF BUILDING GOES UP IN BACKGROUND AS WORKERS PLACE A SECTION OF WATER LINE THAT WILL CARRY SECONDARY COOLANT BETWEEN HEAT EXCHANGER BUILDING AND THE COOLING TOWER. INL NEGATIVE NO. 56-2205. Jack L. Anderson, Photographer, 6/28/1956 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Using aspen for artist stretcher frames: adding value through quality service, direct marketing, and careful material selection

Treesearch

Chris Polson

2001-01-01

Aspen wood, when carefully selected and kiln dried, makes excellent stock for artist stretcher frames. Direct marketing techniques including the Internet and word of mouth give access to national markets, providing a more diverse and stable customer base for operations from a rural area. High-quality service, as shown by product performance and rapid order fulfillment...

Textbooks of Doubt: Using Systemic Functional Analysis to Explore the Framing of Climate Change in Middle-School Science Textbooks

ERIC Educational Resources Information Center

Román, Diego; Busch, K. C.

2016-01-01

Middle school students are learning about climate change in large part through textbooks used in their classes. Therefore, it is crucial to understand how the language employed in these materials frames this topic. To this end, we used systemic functional analysis to study the language of the chapters related to climate change in four sixth grade…

ADVANCED HEAT TRANSFER TEST FACILITY, TRA666A. ELEVATIONS. ROOF FRAMING PLAN. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

ADVANCED HEAT TRANSFER TEST FACILITY, TRA-666A. ELEVATIONS. ROOF FRAMING PLAN. CONCRETE BLOCK SIDING. SLOPED ROOF. ROLL-UP DOOR. AIR INTAKE ENCLOSURE ON NORTH SIDE. F.C. TORKELSON 842-MTR-666-A5, 8/1966. INL INDEX NO. 531-0666-00-851-152258, REV. 2. - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Impact resistant battery enclosure systems

DOEpatents

Tsutsui, Waterloo; Feng, Yuezhong; Chen, Weinong Wayne; Siegmund, Thomas Heinrich

2017-10-31

Battery enclosure arrangements for a vehicular battery system. The arrangements, capable of impact resistance include plurality of battery cells and a plurality of kinetic energy absorbing elements. The arrangements further include a frame configured to encase the plurality of the kinetic energy absorbing elements and the battery cells. In some arrangements the frame and/or the kinetic energy absorbing elements can be made of topologically interlocked materials.

Individual differences in choice (in)flexibility but not impulsivity in the common marmoset: an automated, operant-behavior choice task.

PubMed

Adriani, Walter; Romani, Chiara; Manciocco, Arianna; Vitale, Augusto; Laviola, Giovanni

2013-11-01

Individual differences in behavioural flexibility are a significant issue in human psychopathology as well as in its animal models. We aimed to investigate individual variations of operant-choice behaviour in the common marmoset (Callithrix jacchus), a small New World primate, using a new operant panel with two hand-poking holes. Experimental subjects (N=16) were presented with a choice between a Small & Soon (SS) vs a Large & Late (LL) food reward. After extensive training (31 daily sessions with no delay, during which a basal, large-reward preference developed), the delay before release of LL was progressively increased (from 0 to 60 s, during 16 daily sessions; indifferent point at delay=9 s). Subjects were classified as either "flexible" or "non-flexible", respectively, based on a decrease (or not) in the preference for LL with increasing delays. Each subject was also classified as "maximizer" (or "non-maximizer") based on capacity (or not) to maximize the food payoff as delay increased. Upon delays shorter than the indifferent point (<9s), none of the subjects showed a shift from LL to SS, denoting a lack of delay-induced, cognitive impulsivity. Individual differences only emerged upon delays longer than the indifferent point (>9 s), when a preference shift could be interpreted as economically-driven. In general, a profile of few unrewarded hand-pokes in reaction to initial delays (i.e., a low motor impulsivity) and of clear-cut basal LL preference seemed to predict elevated flexibility of choices and better food payoff, which was typical of subjects classified as both "flexible & maximizer". These results provide normative data on the marmosets, which can be used as a model for the investigation of 1) individual differences in behavioural flexibility, as well as 2) biological mechanisms rooted in our evolutionary history. Copyright © 2013 Elsevier B.V. All rights reserved.

MSG intake and preference in mice are influenced by prior testing experience.

PubMed

Ackroff, Karen; Weintraub, Rachel; Sclafani, Anthony

2012-09-10

Monosodium glutamate (MSG), the prototypical umami substance, is used as a flavor enhancer in many foods, but when presented alone is often only weakly attractive. Yet with experience mice will develop strong preferences for MSG solution over water. The present experiments explored the conditions that change indifference to preference for MSG. C57BL/6J mice were given a series of 2-day two-bottle tests with water vs. an ascending series of MSG concentrations (0.1-450 mM) to assess preference and intake. Naive mice were indifferent to all concentrations, but following forced one-bottle exposure to 300 mM MSG they preferred most concentrations and consumed more MSG. Exposure to 100mM MSG also increased subsequent MSG preference but not intake. Experience with other nutritive solutions (8% sucrose, 8% Polycose, 8% casein hydrolysate, and isocaloric 3.5% soybean oil emulsion) also enhanced subsequent MSG preference and intake. Polycose and sucrose experience were almost as effective as MSG experience. However, not all sapid solutions were effective; 0.8% sucralose and 10mM MSG exposure did not alter subsequent MSG preference. The generality of the preexposure effect was tested by offering an ascending series (0.1-100 mM) of inosine monophosphate (IMP), another umami substance; initial indifference was converted to preference after forced exposure to 300 mM MSG. Together these results suggest that a combination of oral and post-oral effects may be responsible for the experience effect, with MSG itself the most potent stimulus. A final experiment revealed that MSG preference in naïve mice is enhanced by presenting the MSG and water drinking spouts far apart rather than side by side. Thus the preferences for umami solutions in mice are subject to influence from prior tastant experience as well spout position, which should be taken into account when studying acceptance of taste solutions in mice. Copyright © 2012 Elsevier Inc. All rights reserved.

Influencing health decision-making: A study of colour and message framing.

PubMed

Voss, Raymond P; Corser, Ryan; McCormick, Michael; Jasper, John D

2018-07-01

Previous research has provided evidence that colour associations and frame can influence behavioural intentions to engage in vaccination behaviours. In this study, the extension of these effects to sunscreen application behaviours was investigated. Additional colours and the manner in which colour primes were employed were also explored. Two hundred and eighty-six college students were primed with either short wavelength colours (blue/purple) or long wavelength colours (red/orange) as part of goal framed sunscreen information pamphlets. Self-reported behavioural intentions to apply sunscreen, immediate affective reaction to stimuli material, anticipated affect towards sunscreen use, and perceived efficacy of preventing skin cancer were measured. Individuals with no prior intention to use sunscreen expressed greater behavioural intentions to do so after reading a positively framed sunscreen pamphlet that was designed using short wavelength colours. The negatively framed messages and those presented in long wavelength colours did not enhance persuasion. In accordance with the Unification Theory of Framing, a match between the representations of the target behaviour, the colour prime, and the frame resulted in the greatest amount of persuasion. Creating communications with representations that match the target behaviour could be a powerful tool to increase compliance.

Frames and counter-frames giving meaning to dementia: a framing analysis of media content.

PubMed

Van Gorp, Baldwin; Vercruysse, Tom

2012-04-01

Media tend to reinforce the stigmatization of dementia as one of the most dreaded diseases in western society, which may have repercussions on the quality of life of those with the illness. The persons with dementia, but also those around them become imbued with the idea that life comes to an end as soon as the diagnosis is pronounced. The aim of this paper is to understand the dominant images related to dementia by means of an inductive framing analysis. The sample is composed of newspaper articles from six Belgian newspapers (2008-2010) and a convenience sample of popular images of the condition in movies, documentaries, literature and health care communications. The results demonstrate that the most dominant frame postulates that a human being is composed of two distinct parts: a material body and an immaterial mind. If this frame is used, the person with dementia ends up with no identity, which is in opposition to the Western ideals of personal self-fulfilment and individualism. For each dominant frame an alternative counter-frame is defined. It is concluded that the relative absence of counter-frames confirms the negative image of dementia. The inventory might be a help for caregivers and other professionals who want to evaluate their communication strategy. It is discussed that a more resolute use of counter-frames in communication about dementia might mitigate the stigma that surrounds dementia. Copyright © 2012 Elsevier Ltd. All rights reserved.

A solution to the static frame validation challenge problem using Bayesian model selection

DOE PAGES

Grigoriu, M. D.; Field, R. V.

2007-12-23

Within this paper, we provide a solution to the static frame validation challenge problem (see this issue) in a manner that is consistent with the guidelines provided by the Validation Challenge Workshop tasking document. The static frame problem is constructed such that variability in material properties is known to be the only source of uncertainty in the system description, but there is ignorance on the type of model that best describes this variability. Hence both types of uncertainty, aleatoric and epistemic, are present and must be addressed. Our approach is to consider a collection of competing probabilistic models for themore » material properties, and calibrate these models to the information provided; models of different levels of complexity and numerical efficiency are included in the analysis. A Bayesian formulation is used to select the optimal model from the collection, which is then used for the regulatory assessment. Lastly, bayesian credible intervals are used to provide a measure of confidence to our regulatory assessment.« less

Energy conversion system

DOEpatents

Murphy, Lawrence M.

1987-01-01

The energy conversion system includes a photo-voltaic array for receiving solar radiation and converting such radiation to electrical energy. The photo-voltaic array is mounted on a stretched membrane that is held by a frame. Tracking means for orienting the photo-voltaic array in predetermined positions that provide optimal exposure to solar radiation cooperate with the frame. An enclosure formed of a radiation transmissible material includes an inside containment space that accommodates the photo-voltaic array on the stretched membrane, the frame and the tracking means, and forms a protective shield for all such components. The enclosure is preferably formed of a flexible inflatable material and maintains its preferred form, such as a dome, under the influence of a low air pressure furnished to the dome. Under this arrangement the energy conversion system is streamlined for minimizing wind resistance, sufficiently weatherproof for providing protection against weather hazards such as hail, capable of using diffused light, lightweight for low-cost construction, and operational with a minimal power draw.

Energy conversion system

DOEpatents

Murphy, L.M.

1985-09-16

The energy conversion system includes a photo-voltaic array for receiving solar radiation and converting such radiation to electrical energy. The photo-voltaic array is mounted on a stretched membrane that is held by a frame. Tracking means for orienting the photo-voltaic array in predetermined positions that provide optimal exposure to solar radiation cooperate with the frame. An enclosure formed of a radiation transmissible material includes an inside containment space that accommodates the photo-voltaic array on the stretched membrane, the frame and the tracking means, and forms a protective shield for all such components. The enclosure is preferably formed of a flexible inflatable material and maintains its preferred form, such as a dome, under the influence of a low air pressure furnished to the dome. Under this arrangement the energy conversion system is streamlined for minimizing wind resistance, sufficiently weathproof for providing protection against weather hazards such as hail, capable of using diffused light, lightweight for low-cost construction and operational with a minimal power draw.

Development of a cryogenic load frame for the neutron diffractometer at Takumi in Japan Proton Accelerator Research Complex

NASA Astrophysics Data System (ADS)

Jin, Xinzhe; Nakamoto, Tatsushi; Harjo, Stefanus; Hemmi, Tsutomu; Umeno, Takahiro; Ogitsu, Toru; Yamamoto, Akira; Sugano, Michinaka; Aizawa, Kazuya; Abe, Jun; Gong, Wu; Iwahashi, Takaaki

2013-06-01

To prepare for projects such as the Large Hadron Collider upgrade, International Thermonuclear Experimental Reactor and Demonstration reactor, it is important to form a clear understanding of stress-strain properties of the materials that make up superconducting magnets. Thus, we have been studying the mechanical properties of superconducting wires using neutron diffraction measurements. To simulate operational conditions such as temperature, stress, and strain, we developed a cryogenic load frame for stress-strain measurements of materials using a neutron diffractometer at Japan Proton Accelerator Research Complex (J-PARC) Takumi beam line. The maximum load that can be applied to a sample using an external driving machine is 50 kN. Using a Gifford-MacMahon cryocooler, samples can be measured down to temperatures below 10 K when loaded. In the present paper, we describe the details of the cryogenic load frame with its test results by using type-304 stainless steel wire.

Development of a cryogenic load frame for the neutron diffractometer at Takumi in Japan Proton Accelerator Research Complex

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jin, Xinzhe; Nakamoto, Tatsushi; Ogitsu, Toru

2013-06-15

To prepare for projects such as the Large Hadron Collider upgrade, International Thermonuclear Experimental Reactor and Demonstration reactor, it is important to form a clear understanding of stress-strain properties of the materials that make up superconducting magnets. Thus, we have been studying the mechanical properties of superconducting wires using neutron diffraction measurements. To simulate operational conditions such as temperature, stress, and strain, we developed a cryogenic load frame for stress-strain measurements of materials using a neutron diffractometer at Japan Proton Accelerator Research Complex (J-PARC) Takumi beam line. The maximum load that can be applied to a sample using an externalmore » driving machine is 50 kN. Using a Gifford-MacMahon cryocooler, samples can be measured down to temperatures below 10 K when loaded. In the present paper, we describe the details of the cryogenic load frame with its test results by using type-304 stainless steel wire.« less

Development of a cryogenic load frame for the neutron diffractometer at Takumi in Japan Proton Accelerator Research Complex.

PubMed

Jin, Xinzhe; Nakamoto, Tatsushi; Harjo, Stefanus; Hemmi, Tsutomu; Umeno, Takahiro; Ogitsu, Toru; Yamamoto, Akira; Sugano, Michinaka; Aizawa, Kazuya; Abe, Jun; Gong, Wu; Iwahashi, Takaaki

2013-06-01

To prepare for projects such as the Large Hadron Collider upgrade, International Thermonuclear Experimental Reactor and Demonstration reactor, it is important to form a clear understanding of stress-strain properties of the materials that make up superconducting magnets. Thus, we have been studying the mechanical properties of superconducting wires using neutron diffraction measurements. To simulate operational conditions such as temperature, stress, and strain, we developed a cryogenic load frame for stress-strain measurements of materials using a neutron diffractometer at Japan Proton Accelerator Research Complex (J-PARC) Takumi beam line. The maximum load that can be applied to a sample using an external driving machine is 50 kN. Using a Gifford-MacMahon cryocooler, samples can be measured down to temperatures below 10 K when loaded. In the present paper, we describe the details of the cryogenic load frame with its test results by using type-304 stainless steel wire.

Slab edge insulating form system and methods

DOEpatents

Lee, Brain E [Corral de Tierra, CA; Barsun, Stephan K [Davis, CA; Bourne, Richard C [Davis, CA; Hoeschele, Marc A [Davis, CA; Springer, David A [Winters, CA

2009-10-06

A method of forming an insulated concrete foundation is provided comprising constructing a foundation frame, the frame comprising an insulating form having an opening, inserting a pocket former into the opening; placing concrete inside the foundation frame; and removing the pocket former after the placed concrete has set, wherein the concrete forms a pocket in the placed concrete that is accessible through the opening. The method may further comprise sealing the opening by placing a sealing plug or sealing material in the opening. A system for forming an insulated concrete foundation is provided comprising a plurality of interconnected insulating forms, the insulating forms having a rigid outer member protecting and encasing an insulating material, and at least one gripping lip extending outwardly from the outer member to provide a pest barrier. At least one insulating form has an opening into which a removable pocket former is inserted. The system may also provide a tension anchor positioned in the pocket former and a tendon connected to the tension anchor.

Investigating the Improved Aerodynamic Efficiency of Cambered Frames on Membrane MAV Wings

NASA Astrophysics Data System (ADS)

Wrist, Andrew; Zhang, Zheng; Hubner, Paul

2014-11-01

Previous research has demonstrated that membrane wings with cambered frames are more aerodynamically efficient than those with flat frames, despite passive dynamic membrane cambering for both. To help understand this aerodynamic benefit, this study compares the time-averaged membrane shape as well as membrane vibration frequency and amplitude for a group of wings with cambered frames. The frames were 3D printed with a hardened polymer material, and a silicon rubber membrane was attached to the top surface. The frame aspect ratio is two, comprised of two cells each with a cell aspect ratio of one. The rigid leading edge extended 20% of the chord, and the trailing edge was scalloped at 25%. Camber ranged from 2--6%, camber location from 40--60%, and airfoil thickness from 4--6%. Tests were performed in the University of Alabama's MAV wind tunnel at 10 m/s (Re = 50,000). High speed imaging results of the deformation and vibration will be discussed in context to airfoil and wing theory. National Science Foundation Grant Number: 1358991.

Masked-backlighter technique used to simultaneously image x-ray absorption and x-ray emission from an inertial confinement fusion plasma.

PubMed

Marshall, F J; Radha, P B

2014-11-01

A method to simultaneously image both the absorption and the self-emission of an imploding inertial confinement fusion plasma has been demonstrated on the OMEGA Laser System. The technique involves the use of a high-Z backlighter, half of which is covered with a low-Z material, and a high-speed x-ray framing camera aligned to capture images backlit by this masked backlighter. Two strips of the four-strip framing camera record images backlit by the high-Z portion of the backlighter, while the other two strips record images aligned with the low-Z portion of the backlighter. The emission from the low-Z material is effectively eliminated by a high-Z filter positioned in front of the framing camera, limiting the detected backlighter emission to that of the principal emission line of the high-Z material. As a result, half of the images are of self-emission from the plasma and the other half are of self-emission plus the backlighter. The advantage of this technique is that the self-emission simultaneous with backlighter absorption is independently measured from a nearby direction. The absorption occurs only in the high-Z backlit frames and is either spatially separated from the emission or the self-emission is suppressed by filtering, or by using a backlighter much brighter than the self-emission, or by subtraction. The masked-backlighter technique has been used on the OMEGA Laser System to simultaneously measure the emission profiles and the absorption profiles of polar-driven implosions.

Spray Foam Exterior Insulation with Stand-Off Furring

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herk, Anastasia; Baker, Richard; Prahl, Duncan

IBACOS, in collaboration with GreenHomes America, was contracted by the New York State Energy Research and Development Authority to research exterior wall insulation solutions. This research investigated cost-effective deep energy retrofit (DER) solutions for improving the building shell exterior while achieving a cost-reduction goal, including reduced labor costs to reach a 50/50 split between material and labor. The strategies included exterior wall insulation plus energy upgrades as needed in the attic, mechanical and ventilation systems, and basement band joist, walls, and floors. The work can be integrated with other home improvements such as siding or window replacement. This strategy minimizesmore » physical connections to existing wall studs, encapsulates existing siding materials (including lead paint) with spray foam, and creates a vented rain screen assembly to promote drying. GreenHomes America applied construction details created by IBACOS to a test home. 2x4 framing members were attached to the wall at band joists and top plates using 'L' clips, with spray foam insulating the wall after framing was installed. Windows were installed simultaneously with the framing, including extension jambs. The use of clips in specific areas provided the best strength potential, and 'picture framing' the spray foam held the 2x4s in place. Short-term testing was performed at this house, with monitoring equipment installed for long-term testing. Testing measurements will be provided in a later report, as well as utility impact (before and after), costs (labor and materials), construction time, standard specifications, and analysis for the exterior wall insulation strategy.« less

Spray Foam Exterior Insulation with Stand-Off Furring

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herk, Anatasia; Baker, Richard; Prahl, Duncan

IBACOS, in collaboration with GreenHomes America, was contracted by the New York State Energy Research and Development Authority to research exterior wall insulation solutions. This research investigated cost-effective deep energy retrofit (DER) solutions for improving the building shell exterior while achieving a cost-reduction goal, including reduced labor costs to reach a 50/50 split between material and labor. The strategies included exterior wall insulation plus energy upgrades as needed in the attic, mechanical and ventilation systems, and basement band joist, walls, and floors. The work can be integrated with other home improvements such as siding or window replacement. This strategy minimizesmore » physical connections to existing wall studs, encapsulates existing siding materials (including lead paint) with spray foam, and creates a vented rain screen assembly to promote drying. GreenHomes America applied construction details created by IBACOS to a test home. 2x4 framing members were attached to the wall at band joists and top plates using "L" clips, with spray foam insulating the wall after framing was installed. Windows were installed simultaneously with the framing, including extension jambs. The use of clips in specific areas provided the best strength potential, and "picture framing" the spray foam held the 2x4s in place. Short-term testing was performed at this house, with monitoring equipment installed for long-term testing. Testing measurements will be provided in a later report, as well as utility impact (before and after), costs (labor and materials), construction time, standard specifications, and analysis for the exterior wall insulation strategy.« less

Life Comparative Analysis of Energy Consumption and CO2 Emissions of Different Building Structural Frame Types

PubMed Central

Kim, Sangyong; Moon, Joon-Ho; Shin, Yoonseok; Kim, Gwang-Hee; Seo, Deok-Seok

2013-01-01

The objective of this research is to quantitatively measure and compare the environmental load and construction cost of different structural frame types. Construction cost also accounts for the costs of CO2 emissions of input materials. The choice of structural frame type is a major consideration in construction, as this element represents about 33% of total building construction costs. In this research, four constructed buildings were analyzed, with these having either reinforced concrete (RC) or steel (S) structures. An input-output framework analysis was used to measure energy consumption and CO2 emissions of input materials for each structural frame type. In addition, the CO2 emissions cost was measured using the trading price of CO2 emissions on the International Commodity Exchange. This research revealed that both energy consumption and CO2 emissions were, on average, 26% lower with the RC structure than with the S structure, and the construction costs (including the CO2 emissions cost) of the RC structure were about 9.8% lower, compared to the S structure. This research provides insights through which the construction industry will be able to respond to the carbon market, which is expected to continue to grow in the future. PMID:24227998

Magnetohydrodynamic generator electrode

DOEpatents

Marchant, David D.; Killpatrick, Don H.; Herman, Harold; Kuczen, Kenneth D.

1979-01-01

An improved electrode for use as a current collector in the channel of a magnetohydrodynamid (MHD) generator utilizes an elongated monolithic cap of dense refractory material compliantly mounted to the MHD channel frame for collecting the current. The cap has a central longitudinal channel which contains a first layer of porous refractory ceramic as a high-temperature current leadout from the cap and a second layer of resilient wire mesh in contact with the first layer as a low-temperature current leadout between the first layer and the frame. Also described is a monolithic ceramic insulator compliantly mounted to the frame parallel to the electrode by a plurality of flexible metal strips.

A Humanist's Legacy: Burton Blatt and the Origins of the Disability Rights Movement.

ERIC Educational Resources Information Center

Herr, Stanley S.

1995-01-01

This article recounts the words and deeds of Burton Blatt, a writer, educator, and exposer of abuses of human rights in institutions housing people with mental retardation. His life is seen as an inspiration for those now providing moral leadership in the continuing fight against indifference to human rights abuses and social darwinism. (DB)

State Dream Acts: The Effect of In-State Resident Tuition Policies and Undocumented Latino Students

ERIC Educational Resources Information Center

Flores, Stella M.

2010-01-01

This study examines the effect of in-state resident tuition legislation across the United States on the college enrollment odds of individuals likely to be undocumented Latino immigrants. The study employs a differences-indifferences strategy using data from the Current Population Survey's Merged Outgoing Rotation Groups. Foreign-born noncitizen…

Research Note: Assessing the Perceived Seriousness of White-Collar and Street Crimes

ERIC Educational Resources Information Center

Piquero, Nicole Leeper; Carmichael, Stephanie; Piquero, Alex R.

2008-01-01

Controversy surrounds the ranking of crime seriousness of white-collar crimes relative to street crimes, with early research suggesting the general public is indifferent to crimes of the elite, whereas more recent research indicates that the public thinks certain types of white-collar crime are serious. Building on prior research limitations and…

Tree Stumps, Manhole Covers and Rubbish Tins: The Invisible Play-Lines of a Primary School Playground

ERIC Educational Resources Information Center

Factor, June

2004-01-01

The physical features of a primary school playground - dimensions, textures, furnishings, etc. - are incorporated and adapted for their own purposes by children in their free play. Youngsters create an intricate network of usage, play-lines invisible but known to every child at the school. Unfortunately, the general adult indifference to…

The Influence of Emotional Reaction on Help Seeking by Victims of School Bullying

ERIC Educational Resources Information Center

Hunter, Simon C.; Borg, Mark G.

2006-01-01

Research has begun to focus on how victims of school bullying cope, but there is still little understanding of why pupils will cope in one particular way and not another. This paper aimed to examine the effects of gender, stage of schooling, frequency of victimisation, and different emotions (anger, vengeance, self-pity, indifference, and…

Back to 'the Basics' in Schools: Here's the Case for Pushing the Current Trend Into a Landslide

ERIC Educational Resources Information Center

Weber, George

1975-01-01

Public education is justified only when schools provide a sound, basic education for all students. Devotion to basic education does not mean indifference to the social and vocational development of students. On the contrary, the first essential in such development is, and always has been, competence in the basics. (Author)

78 FR 39327 - Bio Diagnostic International; Denial of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-01

... Substances or a license from the California Board of Pharmacy, as well as his legal conclusion that... that its reasoning is flawed for two reasons: (1) It relied on provisions of the CSA which are... indifferently if a judicial system is to function effectively.''' McKinnon v. Kwong Wah Restaurant, 83 F.3d 498...

Darwin vs. Wallace: When Poetry Dies and When Poetry Survives in the Not-so-Natural Selection of Memetic Evolution

ERIC Educational Resources Information Center

Christensen, Bryce

2011-01-01

The theory of memetic evolution--explaining the reproduction of cultural units called "memes"--illuminates the decline of poetry as a cultural presence by clarifying the contrasting attitudes towards poetry manifested by the co-discoverers of natural selection: Charles Darwin and Alfred Wallace. Darwin's eventual indifference to poetry…

Translations on Eastern Europe Political, Sociological, and Military Affairs, Number 1483.

DTIC Science & Technology

1977-12-09

apparatus carries out its obligations? Are they that indifferent if the apparatus workers wear out their elbows in the offices, completing all...health is not good, she said. And we said: if his health is not good, how then can he play tennis , and then she began to shout: you are setting up

Family and Differential Involvement with Marihuana: A Study of Suburban Teenagers

ERIC Educational Resources Information Center

Tec, Nechama

1970-01-01

Results point to a negative association between degree of involvement with marihuana and: (1) quality of parental models; (2) high amount of recognition received within the family; (3) perceptions of the family as warm and not simply controlling and/or indifferent; (4) subjective feelings of satisfaction and the ability to rely upon the family as…

Fostering Global Awareness, or What I Learned on My Summer Vacation

ERIC Educational Resources Information Center

Philion, Thomas

2008-01-01

With regard to enhancing teacher candidates' global awareness, teacher education currently faces two challenges: indifference and inaction. The author based this claim primarily on observation and personal experience. In a course on teaching literacy in the content areas, the author began with an overview of the state of literacy, not just in the…

Zero Indifference: A How-To Guide for Ending Name-Calling in Schools.

ERIC Educational Resources Information Center

Goldstein, Nancy

This report discusses how to end name-calling in schools, examining derogatory expressions commonly used to refer to lesbian, gay, bisexual, and transgender (LGBT) people. Anti-LGBT slurs have become the insult of choice in today's schools, which takes a toll on LGBT students who hear the slurs endlessly and take them personally. Research shows…

Engaging Mindfully with the Commons: A Case of Caribbean Teachers' Experience with ESD

ERIC Educational Resources Information Center

Down, Lorna

2015-01-01

A study of teachers' responses to Education for Sustainable Development (ESD) in a graduate course in Literature and Education for Sustainable Development, at the School of Education, The University of the West Indies, Mona, revealed that ESD can change indifference to the "commons" to one of mindfulness about local and global…

Relation between Classroom Climate and Achievement in Physical Science of Secondary School Pupils

ERIC Educational Resources Information Center

R., Smitha; Sajan, K. S.

2010-01-01

This study estimates the extent of relationship between "Achievement in Physical Science" and "Classroom Climate" for the total sample and Sub sample based on gender. The tools used for collecting the data are scale of classroom climate and achievement test in physical science. The study reveals that boys show indifferent or…

Visual Research Methods in Education: In between Difference and Indifference

ERIC Educational Resources Information Center

Moss, Julianne

2013-01-01

The aim of this paper is to support critical and scholarly debates that relate to the increasing role of visual research in education, youth studies, sociology, and studies of mental health. Researching in fields where young people are central exposes many struggles, not least issues of how to represent students who end up on the margins. School…

Continuity or Break: Danto and Gadamer on the Crisis of Anti-Aestheticism

ERIC Educational Resources Information Center

Foster, James

2011-01-01

According to Arthur Danto, the crisis of modern art is not the abandonment of representation, nor an attempt at intentional "uglification," but a struggle to escape the aesthetic objectification of artworks. This attempt at escape has led modern artists to hold an indifferent attitude toward beauty, an attitude that has resulted in the readymade:…

Exploration of the Pathways to Delinquency for Female Adolescents with Depression: Implications for Cross-Systems Collaboration and Counseling

ERIC Educational Resources Information Center

Mellin, Elizabeth A.; Fang, Hong-Ning

2010-01-01

This study found that lack of involvement in prosocial institutions, affiliation with other troubled youth, and indifference regarding personal safety partially mediate the relationship between depression and delinquency among justice-involved female adolescents. The results suggest that depression may not be the primary conduit to delinquency.…

Social Support and Socioeconomic Status Predict Secondary Students' Grades and Educational Plans Indifferently across Immigrant Group and Gender

ERIC Educational Resources Information Center

Ulriksen, Robin; Sagatun, Åse; Zachrisson, Henrik Daae; Waaktaar, Trine; Lervåg, Arne Ola

2015-01-01

Social support and socioeconomic status (SES) have received considerable attention in explaining academic achievement and the achievement gap between students with ethic majority and immigrant background, and between boys and girls. Using a Structural Equation Modeling approach we examine (1) if there exist a gap in school achievements between…

Engineering Students Define Diversity: An Uncommon Thread. Research Brief

ERIC Educational Resources Information Center

Fleming, Lorraine; Ledbetter, Sislena; Williams, Dawn; McCain, Janice

2008-01-01

Diversity has taken on many meanings, depending on the context in which it is used and the person using it. Today's engineering students have come to embody diversity as an extension of their home, academic and social environments. The result is a group of students that often show indifference to diversity (however defined) and the impact it will…

Education and Tolerance. International Commission on Education for the Twenty-First Century.

ERIC Educational Resources Information Center

Connell, Helen

This paper explores the issue of tolerance and its important place in education. The consequences of an unchecked growth of intolerance, fostered by indifference, in the form of an increase in violent conflict, promises to be not only unpleasant locally, but possibly catastrophic on a world scale, when interdependent social and economic structures…

A Graphical Exposition of the Link between Two Representations of the Excess Burden of Taxation

ERIC Educational Resources Information Center

Liu, Liqun; Rettenmaier, Andrew J.

2005-01-01

The excess burden of taxation typically has two graphical representations in undergraduate microeconomics and public finance textbooks: the IC/BC (indifference curve/budget constraint) representation and the demand/supply representation. The IC/BC representation has the advantage of showing the behavioral response to a distortionary tax and how a…

What if "Form" Was the Aid? Possible Opportunities for Renewed Neighbourliness in Aid Relationships

ERIC Educational Resources Information Center

Sanga, Kabini

2016-01-01

For Pacific Islands' peoples, relationships are of enduring importance. Yet, in spite of decades of aid giving and receiving, relationships in Pacific aid communities have predominantly been indifferent. In an era of global challenges, a new Oceania Education aid community is called to journey together to the common good through relational…

The Philosopher and the Lecturer: John Dewey, Everett Dean Martin, and Reflective Thinking

ERIC Educational Resources Information Center

Day, Michael; Harbour, Clifford P.

2013-01-01

Adult education scholars have not yet examined the connections between the philosopher, John Dewey, and the lecturer on adult education, Everett Dean Martin. These scholars generally portray Dewey as indifferent to their field. However, Dewey's correspondence with a New York newspaper editor in 1928, recommending Martin's The Meaning of…

What Are Some Alternatives for Working Within a Regionally Adopted Science Framework?

ERIC Educational Resources Information Center

Perkes, Victor A.

Alternatives for working within a regionally adopted framework for selecting an elementary school science program are considered in this paper. The alternatives are ranked on a scale from 0 to 5 in increasing levels of modifying a set instructional pattern: Level 0, typified by indifference to any consistent program in science; Level 1, a complete…

Proactive, Preventive or Indifference? Reaction Modes of Faculty towards Use of Personal Mobile Devices in Courses

ERIC Educational Resources Information Center

Forkosh-Baruch, Alona; Meishar-Tal, Hagit

2016-01-01

Students enter classes with mobile devices and use them for learning; however, these are also distracting devices. Some teacher educators display positive attitudes; others display negative attitudes, depending on their perception of the advantages and disadvantages of mobile technology for learning. This paper represents findings of a study that…

3 CFR 8452 - Proclamation 8452 of November 9, 2009. World Freedom Day, 2009

Code of Federal Regulations, 2010 CFR

2010-01-01

... for millions who had known only tyranny. Markets opened too, spreading information and technology that... than at any time in human history, giving rise to new opportunities for shared progress. Today, the... indifference. History reminds us that such walls can be torn down, but where they still exist we must work with...

Assessment Timing: Student Preferences and Its Impact on Performance

ERIC Educational Resources Information Center

McManus, Richard

2016-01-01

Students on a first year undergraduate economics module were given the choice of when to sit their first assessment in the subject in order to determine both preferences over assessment timing, and the impact of timing on performance. Clear preferences of having this option were shown (only 2% of students stated to be indifferent) with those more…

Adjustable knife cuts honeycomb material to specified depth

NASA Technical Reports Server (NTRS)

Rauschl, J. A.

1966-01-01

Calibrated, adjustable knife cuts aluminum honeycomb or other soft materials to a desired depth. The frame of the device accommodates standard commercial blades. Since the blade is always visible to the operator, the device can be used on any straight or irregular layout line.

Five Different Types of Framing Effects in Medical Situation: A Preliminary Exploration

PubMed Central

Peng, Jiaxi; Li, Hongzheng; Miao, Danmin; Feng, Xi; Xiao, Wei

2013-01-01

Background Considerable reports concerned the framing effect in medical situations. But quite few of them noticed to explore the differences among the various kinds of framing effects. Objectives In the present study, five different types of framing effects were examined and the effect sizes of them were compared. Materials and Methods Medical decision making problems concerning medicine effect evaluation, patient's compliance, treatment and doctor options selection were established. All the problems were described in both positive and negative frames. 500 undergraduates as participants were randomly divided into ten groups. Participants from each group were asked to finish one decision making task. Results All the frames that were examined leaded to significant framing effects: When the Asia Disease Problem was described in a positive frame, the participants preferred the conservative frame than the risky one, while if in a negative frame, the preference reversed (P < 0.01). If the drug effect was described as “of 100 patients taking this kind of medicine, 70 patients became better”, people tended to make more positive evaluations, compared with described as “of 100 patients taking this kind of medicine, 30 patients didn’t become better” (P < 0.01). Doctors’ advices were respectively described in a baneful or beneficial frame and the former one resulted in a better compliance (P < 0.05). If treatment options were described with a survival rate, people tended to choose risky option, while if described with a mortality rate, people tended to choose conservative option (P < 0.05). The number sized framing effect was also tested to be significant (P < 0.01). The five types of framing effects were small to big in effect size. Conclusions Medical decision making can be affected by frame descriptions. Attentions should be paid on the standardization of description in medical practice. PMID:23682330

Mid-Ventilation Concept for Mobile Pulmonary Tumors: Internal Tumor Trajectory Versus Selective Reconstruction of Four-Dimensional Computed Tomography Frames Based on External Breathing Motion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guckenberger, Matthias; Wilbert, Juergen; Krieger, Thomas

2009-06-01

Purpose: To evaluate the accuracy of direct reconstruction of mid-ventilation and peak-phase four-dimensional (4D) computed tomography (CT) frames based on the external breathing signal. Methods and Materials: For 11 patients with 15 pulmonary targets, a respiration-correlated CT study (4D CT) was acquired for treatment planning. After retrospective time-based sorting of raw projection data and reconstruction of eight CT frames equally distributed over the breathing cycle, mean tumor position (P{sub mean}), mid-ventilation frame, and breathing motion were evaluated based on the internal tumor trajectory. Analysis of the external breathing signal (pressure sensor around abdomen) with amplitude-based sorting of projections was performedmore » for direct reconstruction of the mid-ventilation frame and frames at peak phases of the breathing cycle. Results: On the basis of the eight 4D CT frames equally spaced in time, tumor motion was largest in the craniocaudal direction, with 12 {+-} 7 mm on average. Tumor motion between the two frames reconstructed at peak phases was not different in the craniocaudal and anterior-posterior directions but was systematically smaller in the left-right direction by 1 mm on average. The 3-dimensional distance between P{sub mean} and the tumor position in the mid-ventilation frame based on the internal tumor trajectory was 1.2 {+-} 1 mm. Reconstruction of the mid-ventilation frame at the mean amplitude position of the external breathing signal resulted in tumor positions 2.0 {+-} 1.1 mm distant from P{sub mean}. Breathing-induced motion artifacts in mid-ventilation frames caused negligible changes in tumor volume and shape. Conclusions: Direct reconstruction of the mid-ventilation frame and frames at peak phases based on the external breathing signal was reliable. This makes the reconstruction of only three 4D CT frames sufficient for application of the mid-ventilation technique in clinical practice.« less

Analysis of Thermal Power Generation Capacity for a Skutterudite-Based Thermoelectric Functional Structure

NASA Astrophysics Data System (ADS)

Sun, Yajing; Chen, Gang; Bai, Guanghui; Yang, Xuqiu; Li, Peng; Zhai, Pengcheng

2017-05-01

Due to military or other requirements for hypersonic aircraft, the energy supply devices with the advantages of small size and light weight are urgently needed. Compared with the traditional energy supply method, the skutterudite-based thermoelectric (TE) functional structure is expected to generate electrical energy with a smaller structural space in the hypersonic aircraft. This paper mainly focuses on the responded thermal and electrical characteristics of the skutterudite-based TE functional structure (TEFS) under strong heat flux loads. We conduct TE simulations on the transient model of the TEFS with consideration of the heat flux loads and thermal radiation in the hot end and the cooling effect of the phase change material (PCM) in the cold end. We investigate several influential factors on the power generation capacity, such as the phase transition temperature of the PCM, the heat flux loads, the thickness of the TE materials and the thermal conductivity of the frame materials. The results show that better power generation capacity can be achieved with thicker TE materials, lower phase transition temperature and suitable thermal conductivity of the frame materials.

A content analysis of preconception health education materials: characteristics, strategies, and clinical-behavioral components.

PubMed

Levis, Denise M; Westbrook, Kyresa

2013-01-01

Many health organizations and practitioners in the United States promote preconception health (PCH) to consumers. However, summaries and evaluations of PCH promotional activities are limited. We conducted a content analysis of PCH health education materials collected from local-, state-, national-, and federal-level partners by using an existing database of partners, outreach to maternal and child health organizations, and a snowball sampling technique. Not applicable. Not applicable. Thirty-two materials were included for analysis, based on inclusion/exclusion criteria. A codebook guided coding of materials' characteristics (type, authorship, language, cost), use of marketing and behavioral strategies to reach the target population (target audience, message framing, call to action), and inclusion of PCH subject matter (clinical-behavioral components). The self-assessment of PCH behaviors was the most common material (28%) to appear in the sample. Most materials broadly targeted women, and there was a near-equal distribution in targeting by pregnancy planning status segments (planners and nonplanners). "Practicing PCH benefits the baby's health" was the most common message frame used. Materials contained a wide range of clinical-behavioral components. Strategic targeting of subgroups of consumers is an important but overlooked strategy. More research is needed around PCH components, in terms of packaging and increasing motivation, which could guide use and placement of clinical-behavioral components within promotional materials.

Low-frequency and wideband vibration energy harvester with flexible frame and interdigital structure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Pengwei, E-mail: lipengwei@tyut.edu.cn; Wang, Yanfen; Luo, Cuixian

2015-04-15

As an alternative to traditional cantilever beam structures and their evolutions, a flexible beam based, interdigital structure, vibration energy harvester has been presented and investigated. The proposed interdigital-shaped oscillator consists of a rectangular flexible frame and series of cantilever beams interdigitally bonded to it. In order to achieve low frequency and wide-bandwidth harvesting, Young’s modulus of materials, frame size and the amount of the cantilevers have been studied systematically. The measured frequency responses of the designed device (PDMS frame, quintuple piezoelectric cantilever beams) show a 460% increase in bandwidth below 80Hz. When excited at an acceleration of 1.0 g, themore » energy harvester achieves to a maximum open-circuit voltage of 65V, and the maximum output power 4.5 mW.« less

Counterpropagating wave acoustic particle manipulation device for the effective manufacture of composite materials.

PubMed

Scholz, Marc-S; Drinkwater, Bruce W; Llewellyn-Jones, Thomas M; Trask, Richard S

2015-10-01

An ultrasonic assembly device exhibiting broadband behavior and a sacrificial plastic frame is described. This device is used to assemble a variety of microscopic particles differing in size, shape, and material into simple patterns within several host fluids. When the host fluid is epoxy, the assembled materials can be cured and the composite sample extracted from the sacrificial frame. The wideband performance means that within a single device, the wavelength can be varied, leading to control of the length scale of the acoustic radiation force field. We show that glass fibers of 50 μm length and 14 μm diameter can be assembled into a series of stripes separated by hundreds of microns in a time of 0.3 s. Finite element analysis is used to understand the attributes of the device which control its wideband characteristics. The bandwidth is shown to be governed by the damping produced by a combination of the plastic frame and the relatively large volume of the fluid particle mixture. The model also reveals that the acoustic radiation forces are a maximum near the substrate of the device, which is in agreement with experimental observations. The device is extended to 8-transducers and used to assemble more complex particle distributions.

75 FR 67043 - Requirements for Bicycles

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-01

... proposed rule would create an exception for carbon fiber material. The requirement for a quick- release... fiber material. Carbon fiber is stronger than aluminum and steel, but embossing (or indenting) a carbon... weakening a carbon fiber frame or fork), the proposal would, instead, create an exception for carbon fiber...

A Postulated Mechanism that Leads to Materialization and Dematerialization of Matter and to Antigravity

DTIC Science & Technology

1975-10-08

m AD-A020 796 A POSTULATED MECHANISM THAT LEADS TO MATERIALIZATION AND DEMATERIALIZATION OF MATTER AND TO ANTIGRAVITY Thomas E. Bearden Army...TITLE fand Subtlll») A POSTULATED MECHANISM THAT LEADS TO MATERIALIZATION AND DEMATERIALIZATION OF MATTER AND TO ANTIGRAVITY S. TYPE OF REPORT... Antigravity 1 Three-dimensional space Photon Orthogonal frames i I

Boron-copper neutron absorbing material and method of preparation

DOEpatents

Wiencek, Thomas C.; Domagala, Robert F.; Thresh, Henry

1991-01-01

A composite, copper clad neutron absorbing material is comprised of copper powder and boron powder enriched with boron 10. The boron 10 content can reach over 30 percent by volume, permitting a very high level of neutron absorption. The copper clad product is also capable of being reduced to a thickness of 0.05 to 0.06 inches and curved to a radius of 2 to 3 inches, and can resist temperatures of 900.degree. C. A method of preparing the material includes the steps of compacting a boron-copper powder mixture and placing it in a copper cladding, restraining the clad assembly in a steel frame while it is hot rolled at 900.degree. C. with cross rolling, and removing the steel frame and further rolling the clad assembly at 650.degree. C. An additional sheet of copper can be soldered onto the clad assembly so that the finished sheet can be cold formed into curved shapes.

Mechanical Properties of Composite Waste Material Based Styrofoam, Baggase and Eggshell Powder for Application of Drone Frames

NASA Astrophysics Data System (ADS)

Perdana, Mastariyanto; Prastiawan; Hadi, Syafrul

2017-12-01

The garbage issue becomes a very serious problem at the moment. Much research has been done to make waste into useful materials. One of the utilization of waste is as the basic material of composite material that can be applied in the field of engineering. Some of the wastes generated are styrofoam, bagasse and eggshell. Styrofoam, bagasse and eggshell can be applied to a composite material. Styrofoam serves as a composite binder material while the bagasse and eggshells serve as a reinforcement. Volume fraction between styrofoam, bagasse and eggshell are 80%:10%:10%, 70%:15%:15%, 60%:20%:20%, and 50%:25%:25%. The aims of research are determine the mechanical properties of composite material based waste materials from styrofoam, bagasse and eggshell. Mechanical properties tested in this study are bending strength and toughness of composite materials. The results showed bending strength of composite for each volume fraction of 80%:10%:10%, 70%:15%:15%, 60%:20%:20%, and 50%:25%:25% are 5.07 MPa, 8.45 MPa, 8.68 MPa, and 11.01 MPa, respectively. Toughness of composite materials for each volume fraction of 80%:10%:10%, 70%:15%:15%, 60%:20%:20%, and 50%:25%:25% are 0.33 J/mm2, 0.42 J/mm2, 0.75 J/mm2, and 0.75 J/mm2, respectively. Composite materials based on waste materials from styrofoam, bagasse and eggshell can be used as an alternative material for drone frames.

CAPABILITY TO RECOVER PLUTONIUM-238 IN H-CANYON/HB-LINE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fuller, Kenneth S. Jr.; Smith, Robert H. Jr.; Goergen, Charles R.

2013-01-09

Plutonium-238 is used in Radioisotope Thermoelectric Generators (RTGs) to generate electrical power and in Radioisotope Heater Units (RHUs) to produce heat for electronics and environmental control for deep space missions. The domestic supply of Pu-238 consists of scrap material from previous mission production or material purchased from Russia. Currently, the United States has no significant production scale operational capability to produce and separate new Pu-238 from irradiated neptunium-237 targets. The Department of Energy - Nuclear Energy is currently evaluating and developing plans to reconstitute the United States capability to produce Pu-238 from irradiated Np-237 targets. The Savannah River Site hadmore » previously produced and/or processed all the Pu-238 utilized in Radioisotope Thermoelectric Generators (RTGs) for deep space missions up to and including the majority of the plutonium for the Cassini Mission. The previous full production cycle capabilities included: Np-237 target fabrication, target irradiation, target dissolution and Np-237 and Pu-238 separation and purification, conversion of Np-237 and Pu-238 to oxide, scrap recovery, and Pu-238 encapsulation. The capability and equipment still exist and could be revitalized or put back into service to recover and purify Pu-238/Np-237 or broken General Purpose Heat Source (GPHS) pellets utilizing existing process equipment in HB-Line Scrap Recovery, and H-anyon Frame Waste Recovery processes. The conversion of Np-237 and Pu-238 to oxide can be performed in the existing HB-Line Phase-2 and Phase-3 Processes. Dissolution of irradiated Np-237 target material, and separation and purification of Np-237 and Pu-238 product streams would be possible at production rates of ~ 2 kg/month of Pu-238 if the existing H-Canyon Frames Process spare equipment were re-installed. Previously, the primary H-Canyon Frames equipment was removed to be replaced: however, the replacement project was stopped. The spare equipment is stored and still available for installation. Out of specification Pu-238 scrap material can be purified and recovered by utilizing the HB-Line Phase-1 Scrap Recovery Line and the Phase-3 Pu-238 Oxide Conversion Line along with H-Canyon Frame Waste Recovery process. In addition, it also covers and describes utilizing the Phase-2 Np-237 Oxide Conversion Line, in conjunction with the H-Canyon Frames Process to restore the H-Canyon capability to process and recover Np-237 and Pu-238 from irradiated Np-237 targets and address potential synergies with other programs like recovery of Pu-244 and heavy isotopes of curium from other target material.« less

Behavior Of Aircraft Components Under Crash-Type Loads

NASA Technical Reports Server (NTRS)

Carden, Huey D.; Boitnott, Richard L.; Fasanella, Edwin L.

1993-01-01

Report presents overview of research involving use of concepts of aircraft elements and substructures not necessarily designed or optimized with respect to energy-absorption or crash-loading considerations. Experimental and analytical data presented in report indicate some general trends in failure behaviors of class of composite-material structures including individual fuselage frames, skeleton subfloors with stringers and floor beams but without skin covering, and subfloors with skin added to frame/stringer arrangement.

Chapter 5: Buildings (EERI Earthquake Reconnaissance Team Report: M7.8 Gorkha, Nepal Earthquake on April 25, 2015 and its Aftershocks)

USGS Publications Warehouse

Kaushik, Hemant; Bevington, John; Jaiswal, Kishor; Lizundia, Bret; Shrestha, Surya

2016-01-01

The most common building typologies in Nepal are reinforced concrete (RC) frame buildings with masonry infill walls, unreinforced masonry (URM) bearing wall buildings, and wood frame buildings (Figure 5-1). The RC frames with masonry infills are commonly constructed in urban and semi-urban areas. Most of these buildings are three to five stories high, and most privately owned buildings are non-engineered. High rise buildings (up to 17 stories high) are also found in Kathmandu, but their number is limited. Burnt clay bricks are widely used as masonry infill walls; external walls are generally one full brick thick (~ 230 mm), and internal walls are one half brick thick. URM bearing wall buildings are an obvious choice for the population in rural areas and the outskirts of cities, primarily to limit the material expenses. Such buildings are generally two to four stories high and constructed using burnt clay brick masonry or stone masonry with cement, lime, or mud mortar. In some of the older constructions, a different mortar known as Vajra (a mix of lime and brick dust) is also observed. These buildings have either wooden or reinforced concrete flooring. A hybrid type of construction also prevails in semi-urban and rural areas, where wood frames are used in the ground story front façade, and rest of the house is made of unreinforced masonry bearing walls. Wood frame houses (generally two to three stories high) are also observed in rural areas where the material for such construction is easily available.

On the influence of frequency-dependent elastic properties in vibro-acoustic modelling of porous materials under structural excitation

NASA Astrophysics Data System (ADS)

Van der Kelen, C.; Göransson, P.; Pluymers, B.; Desmet, W.

2014-12-01

The aspects related to modelling the frequency dependence of the elastic properties of air-saturated porous materials have been largely neglected in the past for several reasons. For acoustic excitation of porous materials, the material behaviour can be quite well represented by models where the properties of the solid frame have little influence. Only recently has the importance of the dynamic moduli of the frame come into focus. This is related to a growing interest in the material behaviour due to structural excitation. Two aspects stand out in connection with the elastic-dynamic behaviour. The first is related to methods for the characterisation of the dynamic moduli of porous materials. The second is a perceived lack of numerical methods able to model the complex material behaviour under structural excitation, in particular at higher frequencies. In the current paper, experimental data from a panel under structural excitation, coated with a porous material, are presented. In an attempt to correlate the experimental data to numerical predictions, it is found that the measured quasi-static material parameters do not suffice for an accurate prediction of the measured results. The elastic material parameters are then estimated by correlating the numerical prediction to the experimental data, following the physical behaviour predicted by the augmented Hooke's law. The change in material behaviour due to the frequency-dependent properties is illustrated in terms of the propagation of the slow wave and the shear wave in the porous material.

One-Third of a Campus: Ruth Crawford Mitchell and Second-Generation Americans at the University of Pittsburgh

ERIC Educational Resources Information Center

Wechsler, Harold S.

2008-01-01

Were colleges obliged to address the dilemmas faced by the many first- and second-generation Americans who enrolled after World War I? No, replied many administrators who espoused exclusion or assimilation, or who expressed indifference. These attitudes meant that many students would never learn to navigate the turbulent waters of campus social…

The Rise of College Reading; The Good, The Bad, and The Indifferent: 1915-1970.

ERIC Educational Resources Information Center

Lowe, A. J.

The history of the college reading improvement program is traced and summarized from 1915 to 1970. The major factors which influenced and shaped the development during 5 decades are listed. During the period from 1920 to 1929, reading tests, tachistoscopes, workbooks, and eye cameras became readily available. From 1930 to 1939, the advent of…

Control of Rhagoletis indifferents using Thiamethoxam and Spinosad baits under external fly pressure and its relation to rapidity of kill and residual bait activity

USDA-ARS?s Scientific Manuscript database

Control of western cherry fruit fly (Rhagoletis indifferens Curran) using thiamethoxam in sucrose bait and spinosad bait in cherry orchards under external fly pressure and its relation to rapidity of kill and residual bait activity were studied in Washington and Utah in 2010 and 2011. Thiamethoxam ...

Excitement, Adventure, Indifference: Romance Readers' Perceptions of How Romance Reading Impacts Their Sex Lives

ERIC Educational Resources Information Center

Anderton, Gretchen E.

2009-01-01

This mixed-methods study examined romance readers' perceptions of how reading romance novels has impacted their sex lives, feelings about their sex partners, knowledge of sexuality and their sexual behavior. Fifty-three women romance readers over the age of 18 completed an online survey composed of multiple choice and open-ended essay questions. …

Further Thoughts on the Writing of Stories: A Response to Michael Gard and Ian Wellard

ERIC Educational Resources Information Center

Gilbourne, David; Jones, Robyn

2014-01-01

In his most recent piece (Gilbourne et al., 2011) and in the present article, the author revisits the notion of "caring" in applied sport psychology, offering readers the chance to wonder how a word misplaced or a gesture of casual indifference might cause lasting damage. As in his recent book, "Critical Essays in Sport…

Toward a Future for Christian Higher Education: Learning from the Past, Looking to the Future

ERIC Educational Resources Information Center

Dockery, David S.

2016-01-01

This article does not attempt to address the many and varied changes currently facing Christian higher education, but seeks to provide a framework for thinking about the future that is grounded in the church's heritage and tradition. Believing that the secular culture is indifferent to the Christian faith and that the Christ world tends to be…

In Vitro Activities of 35 Double Combinations of Antifungal Agents against Scedosporium apiospermum and Scedosporium prolificans▿

PubMed Central

Cuenca-Estrella, Manuel; Alastruey-Izquierdo, Ana; Alcazar-Fuoli, Laura; Bernal-Martinez, Leticia; Gomez-Lopez, Alicia; Buitrago, Maria J.; Mellado, Emilia; Rodriguez-Tudela, Juan L.

2008-01-01

Activities of 35 combinations of antifungal agents against Scedosporium spp. were analyzed by a checkerboard microdilution design and the summation of fractional concentration index. An average indifferent effect was detected apart from combinations of azole agents and echinocandins against Scedosporium apiospermum. Antagonism was absent for all antifungal combinations against both species. PMID:18195067

Cancer Patient Perception of the Living Will: Report of a Pilot Survey.

ERIC Educational Resources Information Center

Stephens, Ronald L.; And Others

1991-01-01

Conducted pilot survey of 64 patients with late stage malignancy who had signed living wills. Found that 70.3 percent were grateful for opportunity to sign living will and maintain autonomy over their terminal care, 20.3 percent were either apparently indifferent or unwilling to discuss issue, and 9.4 percent appeared disturbed by their signing of…

Administrative Directives: A Measure of the Degree of Acceptance as Perceived by Classroom Teachers in Public Community Colleges in Mississippi.

ERIC Educational Resources Information Center

Morris, Harold J.

In an effort to assess community college teachers' level of acceptance of and willingness to implement administrative directives, a survey instrument and personal data sheet were delivered to 130 public community college teachers in Mississippi. A modified Zones of Indifference instrument was used to assess respondents' attitudes towards 71…

Gypsy moth role in forest ecosystems: the good, the bad, and the indifferent

Treesearch

Rose-Marie Muzika; Kurt W. Gottschalk

1995-01-01

Despite a century of attempts to control populations of the gypsy moth, it remains one of the most destructive forest pests introduced to North America. Research has yielded valuable, albeit sometimes conflicting information about the effects of gypsy moth on forests. Anecdotal accounts and scientific data indicate that impacts of gypsy moth defoliation can range from...

Confronting Invisibility: Early Childhood Pre-Service Teachers' Beliefs toward Homeless Children

ERIC Educational Resources Information Center

Kim, Jinhee

2013-01-01

Children make up half of the homeless population in the US, and of those, almost 50 percent are under age six. Homeless children face many different challenges in school. These children and their families have been invisible in school due to the indifference and stereotypes about them. This article focuses on early childhood pre-service teachers'…

Voice and Vision in Paul Zimmer's "The Great Bird of Love."

ERIC Educational Resources Information Center

Worsham, Fabian Clements

Paul Zimmer's latest poetry collection, "The Great Bird of Love," is serious and somber, fraught with the burden of evil, the indifference of God, and the certainty of death. The book is not humorless, however, as humor is central to both the chaotic evil and the ordered goodness of human life. It is in this collection that it is…

Can We Do School Science Better? Facing the Problem of Student Engagement

ERIC Educational Resources Information Center

Turner, Steven; Peck, Debby

2009-01-01

Every experienced teacher knows that, somewhere between the ages of 11 and 16, significant numbers of students pass from a state of enthusiasm and engagement with the study of science to a state of indifference or disdain for the subject. Today a flood of new research is revealing the sheer dimensions of the engagement problem. It shows that…

Philosophy with Children as an Exercise in "Parrhesia": An Account of a Philosophical Experiment with Children in Cambodia

ERIC Educational Resources Information Center

Vansieleghem, Nancy

2011-01-01

The last few decades have seen a steady growth of interest in doing philosophy with children and young people in educational settings. Philosophy with children is increasingly offered as a solution to the problems associated with what is seen by many as a disoriented, cynical, indifferent and individualistic society. It represents for its…

Ignorance or Indifference? Seeking Excellence and Equity for Under-Represented Students of Color in Gifted Education

ERIC Educational Resources Information Center

Wright, Brian L.; Ford, Donna Y.; Young, Jemimah L.

2017-01-01

Lack of access to gifted education is prevalent, yet preventable for Black and Hispanic students. Years of data from the Office for Civil Rights and national reports reveal that deficit thinking, prejudice, and discrimination must be at work, thus compromising the educational experiences of gifted students of color. In this article, the authors…

Implementation Strategy Cooperative Learning Type of Student Achievement Division Team (STAD) to Improve Social Skills Students on Learning Morals in Man 2 Pontianak Learning the Year 2016/2017

ERIC Educational Resources Information Center

Rianawati

2017-01-01

Background doing the research is Social skills is an individual's ability to communicate effectively with others, both verbally and nonverbally. Facts social attitudes such selfishness, individualism, indifferent, no responsible attitude, miss communication and interaction with others. One Cooperative-learning strategy to develop cooperation…

Golden eagle indifference to heli-skiing and military helicopters in northern Utah

Treesearch

Teryl G. Grubb; David K. Delaney; William W. Bowerman; Michael R. Wierda

2010-01-01

In 2006-2007, during Wasatch Powderbird Guides (WPG) permit renewal for heli-skiing in the Tri-Canyon Area (TCA) of the Wasatch Mountains, Utah, USA, we recorded 303 helicopter passes between 0 m and 3,000 m (horizontal distance) near >30 individual golden eagles (Aquila chrysaetos) in 22 nesting territories, through passive observation and active experimentation...

Perceived Risk and Efficacy Beliefs as Motivators of Change: Use of the Risk Perception Attitude (RPA) Framework To Understand Health Behaviors.

ERIC Educational Resources Information Center

Rimal, Rajiv N.; Real, Kevin

2003-01-01

Introduces the risk perception attitude (RPA) framework that categorizes individuals into one of four attitudinal groups: responsive, avoidance, proactive, and indifference. Conducts two studies using college students as subjects. Finds that when risk and efficacy are made salient, people's risk perception guides most of their subsequent actions,…

Web Accessibility in Europe and the United States: What We Are Doing to Increase Inclusion

ERIC Educational Resources Information Center

Wheaton, Joseph; Bertini, Patrizia

2007-01-01

Accessibility is hardly a new problem and certainly did not originate with the Web. Lack of access to buildings long preceded the call for accessible Web content. Although it is unlikely that rehabilitation educators look at Web page accessibility with indifference, many may also find it difficult to implement. The authors posit three reasons why…

Robust 3D DFT video watermarking

NASA Astrophysics Data System (ADS)

Deguillaume, Frederic; Csurka, Gabriela; O'Ruanaidh, Joseph J.; Pun, Thierry

1999-04-01

This paper proposes a new approach for digital watermarking and secure copyright protection of videos, the principal aim being to discourage illicit copying and distribution of copyrighted material. The method presented here is based on the discrete Fourier transform (DFT) of three dimensional chunks of video scene, in contrast with previous works on video watermarking where each video frame was marked separately, or where only intra-frame or motion compensation parameters were marked in MPEG compressed videos. Two kinds of information are hidden in the video: a watermark and a template. Both are encoded using an owner key to ensure the system security and are embedded in the 3D DFT magnitude of video chunks. The watermark is a copyright information encoded in the form of a spread spectrum signal. The template is a key based grid and is used to detect and invert the effect of frame-rate changes, aspect-ratio modification and rescaling of frames. The template search and matching is performed in the log-log-log map of the 3D DFT magnitude. The performance of the presented technique is evaluated experimentally and compared with a frame-by-frame 2D DFT watermarking approach.

Enhancement of phototropic response to a range of light doses in Triticum aestivum coleoptiles in clinostat-simulated microgravity

NASA Technical Reports Server (NTRS)

Heathcote, D. G.; Bircher, B. W.; Brown, A. H. (Principal Investigator)

1987-01-01

The phototropic dose-response relationship has been determined for Triticum aestivum cv. Broom coleoptiles growing on a purpose-built clinostat apparatus providing gravity compensation by rotation about a horizontal axis at 2 rev min-1. These data are compared with data sets obtained with the clinostat axis vertical and stationary, as a 1 g control, and rotating vertically to examine clinostat effects other than gravity compensation. Triticum at 1 g follows the well-established pattern of other cereal coleoptiles with a first positive curvature at low doses, followed by an indifferent response region, and a second positive response at progressively increasing doses. However, these response regions lie at higher dose levels than reported for Avena. There is no significant difference between the responses observed with the clinostat axis vertical in the rotating and stationary modes, but gravity compensation by horizontal rotation increases the magnitude of first and second positive curvatures some threefold at 100 min after stimulation. The indifferent response is replaced by a significant curvature towards the light source, but remains apparent as a reduced curvature response at these dose levels.

How Search for Meaning Interacts with Complex Categories of Meaning in Life and Subjective Well-Being?

PubMed

Damásio, Bruno Figueiredo; Koller, Sílvia Helena

2015-03-03

This study sought to assess how the search for meaning interacts with crisis of meaning and with different categories of meaning in life (meaningfulness, crisis of meaning, existential indifference, and existential conflict). Furthermore, the moderation role of search for meaning between the relation of categories of meaning and subjective well-being (SWB) was also evaluated. Participants included 3,034 subjects (63.9% women) ranging in age from 18 to 91 (M = 33.90; SD = 15.01) years old from 22 Brazilian states. Zero-order correlations and a factorial MANOVA were implemented. Positive low correlations were found for search for meaning and crisis of meaning (r = .258; p < .001). Search for meaning presented a small-effect size moderation effect on the relation of the different categories of meaning with subjective happiness, F(6, 3008) = 2.698, p < .05; η2 = .004, but not for satisfaction with life, F(6, 3008) = .935, p = .47; η2 = .002. The differences on the levels of subjective happiness of those inserted in existential indifferent and conflicting categories differ depending on the levels of search for meaning. Further directions for future studies are proposed.

In vitro activities of ciprofloxacin and rifampin alone and in combination against growing and nongrowing strains of methicillin-susceptible and methicillin-resistant Staphylococcus aureus.

PubMed Central

Bahl, D; Miller, D A; Leviton, I; Gialanella, P; Wolin, M J; Liu, W; Perkins, R; Miller, M H

1997-01-01

We characterized the effects of ciprofloxacin and rifampin alone and in combination on Staphylococcus aureus in vitro. The effects of drug combinations (e.g., indifferent, antagonistic, or additive interactions) on growth inhibition were compared by disk approximation studies and by determining the fractional inhibitory concentrations. Bactericidal effects in log-phase bacteria and in nongrowing isolates were characterized by time-kill methods. The effect of drug combinations was dependent upon whether or not cells were growing and whether killing or growth inhibition was the endpoint used to measure drug interaction. Despite bactericidal antagonism in time-kill experiments, our in vitro studies suggest several possible explanations for the observed benefits in patients treated with a combination of ciprofloxacin and rifampin for deep-seated staphylococcal infections. Notably, when growth inhibition rather than killing was used to characterize drug interaction, indifference rather than antagonism was observed. An additive bactericidal effect was observed in nongrowing bacteria suspended in phosphate-buffered saline. While rifampin antagonized the bactericidal effects of ciprofloxacin, ciprofloxacin did not antagonize the bactericidal effects of rifampin. Each antimicrobial prevented the emergence of subpopulations that were resistant to the other. PMID:9174186

Detonator Performance Characterization using Multi-Frame Laser Schlieren Imaging

NASA Astrophysics Data System (ADS)

Clarke, Steven; Landon, Colin; Murphy, Michael; Martinez, Michael; Mason, Thomas; Thomas, Keith

2009-06-01

Multi-frame Laser Schlieren Imaging of shock waves produced by detonators in transparent witness materials can be used to evaluate detonator performance. We use inverse calculations of the 2D propagation of shock waves in the EPIC finite element model computer code to calculate a temporal-spatial-pressure profile on the surface of the detonator that is consistent with the experimental shock waves from the schlieren imaging. Examples of calculated 2D temporal-spatial-pressure profiles from a range of detonator types (EFI --exploding foil initiators, DOI -- direct optical initiation, EBW -- exploding bridge wire, hotwire), detonator HE materials (PETN, HMX, etc), and HE densities. Also pressure interaction profiles from the interaction of multiple shock waves will be shown. LA-UR-09-00909.

Persuasiveness of online flu-vaccination promotional banners.

PubMed

Chien, Yu-Hung

2013-04-01

Young people appear to have relatively little motivation to participate in flu-vaccination programs. This study assessed the effectiveness of online banners in efforts to persuade young people to get vaccinated. Specifically, a 2 x 3 between-subjects factorial design was used to examine the effects of message framing (gain vs loss) and color configuration (white text on a red background, black text on a yellow background, and white text on a blue background) on 180 college students' perceptions of the persuasiveness of flu-vaccination promotional banners. Each participant completed a four-item questionnaire, and the results of an analysis of variance showed that persuasiveness scores were higher among participants exposed to a loss-framed than to a gain-framed message, but only when the loss-framed message was presented in white text on a red background. The theoretical and practical implications of manipulating these two factors in the development of effective health-promotion materials are discussed.

Geologic Mapping of Ejecta Deposits in Oppia Quadrangle, Asteroid (4) Vesta

NASA Technical Reports Server (NTRS)

Garry, W. Brent; Williams, David A.; Yingst, R. Aileen; Mest, Scott C.; Buczkowski, Debra L.; Tosi, Federico; Schafer, Michael; LeCorre, Lucille; Reddy, Vishnu; Jaumann, Ralf;

Multi-frame X-ray Phase Contrast Imaging (MPCI) for Dynamic Experiments

NASA Astrophysics Data System (ADS)

Iverson, Adam; Carlson, Carl; Sanchez, Nathaniel; Jensen, Brian

2017-06-01

Recent advances in coupling synchrotron X-ray diagnostics to dynamic experiments are providing new information about the response of materials at extremes. For example, propagation based X-ray Phase Contrast Imaging (PCI) which is sensitive to differences in density has been successfully used to study a wide range of phenomena, e.g. jet-formation, compression of additive manufactured (AM) materials, and detonator dynamics. In this talk, we describe the current multi-frame X-ray phase contrast imaging (MPCI) system which allows up to eight frames per experiment, remote optimization, and an improved optical design that increases optical efficiency and accommodates dual-magnification during a dynamic event. Data will be presented that used the dual-magnification feature to obtain multiple images of an exploding foil initiator. In addition, results from static testing will be presented that used a multiple scintillator configuration required to extend the density retrieval to multi-constituent, or heterogeneous systems. The continued development of this diagnostic is fundamentally important to capabilities at the APS including IMPULSE and the Dynamic Compression Sector (DCS), and will benefit future facilities such as MaRIE at Los Alamos National Laboratory.

Germany Since Unification. Workshop Leader's Manual. An Introduction to Social Studies Instructional Resource Materials for Teaching about Germany Since Unification.

ERIC Educational Resources Information Center

Blankenship, Glen

This manual is designed to offer support for the instructional resources guides on "Germany since Unification." It provides the basis for a full-day inservice training session on the use of those materials. The format can be modified to meet the needs of leaders, audiences, and time frames. Using the materials developed by teachers and…

Design concepts for a composite door frame system for general automotive applications

NASA Technical Reports Server (NTRS)

Tauber, J. A.

1976-01-01

Conceptual design, manufacturing process, and costs are explored to determine the feasibility of replacing present steel parts in automotive door structures with various composite materials. The problems of conforming to present anti-intrusion specifications with advanced materials are examined and discussed. Modest weight reductions, at competitive costs, were identified for the utilization of specific composite materials in automotive door structures.

Unmixing the Materials and Mechanics Contributions in Non-resolved Object Signatures

DTIC Science & Technology

2008-09-01

abundances from hyperspectral or multi-spectral time - resolved signatures. A Fourier analysis of temporal variation of material abundance provides...factorization technique to extract the temporal variation of material abundances from hyperspectral or multi-spectral time - resolved signatures. A Fourier...approximately one hundred wavelengths in the visible spectrum. The frame rate for the instrument was not large enough to collect time resolved data. However

Conference on Aerospace Transparent Materials and Enclosures Held in San Diego, California on 9-13 August 1993. Volume 1.

DTIC Science & Technology

1994-03-01

existing baseline aircraft requirements which were modified based on updated threat Information, lessons learned, and composite mission profiles. Composite ...BIRD IMPACT RESISTANT COMPOSITE WINDSHIELD FRAME DEVELOPMENT S. Hargis, SM-ALCITIEC McClellan Air Force Base 0. J. Stenger University of Dayton 190 T... composite windshield frame with an arch consisting of Slaminated S-2 glass fabric and stainless steel sheets in an epoxy matrix has -. been successfully

Investigation of the Production of High Density Uniform Plasmas.

DTIC Science & Technology

1980-10-01

first time with the framing camera. These are a considerable improvement upon the black and white films taken in earlier experi- ments. The different...i 111 I 11Il ELECTRON BEAM JvL ~f OIL REFLECTING PRISMS - -PYREX CELL SUSTAINER CATHODE LENS MIRROR LENS MINATURE ARC LAMP APERTURE FRAMING...was run to test the opposite limit. This cathode also arced earlier than the more con- ventional materials. The first run left several holes in the kap

General Solution for Theoretical Packet Data Loss Rate

NASA Technical Reports Server (NTRS)

Lansdowne, Chatwin; Schlesinger, Adam

2006-01-01

Communications systems which transfer blocks ("frames") of data must use a marker ("frame synchronization pattern") for identifying where a block begins. A technique ("frame synchronization strategy") is used to locate the start of each frame and maintain synchronization as additional blocks are processed. A device which strips out the frame synchronization pattern [FSP] and provides an "end of frame" pulse is called a frame synchronizer. As clock and data errors are introduced into the system, the start-of-block marker becomes displaced and/or corrupted. The capability of the frame synchronizer to stay locked to the pattern under these conditions is a figure of merit for the frame synchronization strategy. It is important to select a strategy which will stay locked nearly all the time at bit error rates where the data is usable. ("Bit error rate" [BER] is the fraction of binary bits which are inverted by passage through a communication system.) The fraction of frames that are discarded because the frame synchronizer is not locked is called "Percent Data Loss" or "Packet Data Loss rate" [PDL]. A general approach for accurately predicting PDL given BER was developed in Theoretical Percent Data Loss Calculation and Measurement Accuracy, T. P. Kelly, LESC-30554, December 1992. Kelly gave a solution in terms of matrix equations, and only addressed "level" channel encoding. This paper goes on to give a closed-form polynomial solution for the most common class of frame synchronizer strategies, and will also address "mark" and "space" (differential) channel encoding, and burst error environments. The paper is divided into four sections and follows a logically ordered presentation, with results developed before they are evaluated. However, most readers will derive the greatest benefit from this paper by treating the results as reference material. The result developed for differential encoding can be extended to other applications (like block codes) where the probability is needed that a block contains only a certain number of errors.

Characterization of system-related geometric distortions in MR images employed in Gamma Knife radiosurgery applications.

PubMed

Pappas, E P; Seimenis, I; Moutsatsos, A; Georgiou, E; Nomikos, P; Karaiskos, P

2016-10-07

This work provides characterization of system-related geometric distortions present in MRIs used in Gamma Knife (GK) stereotactic radiosurgery (SRS) treatment planning. A custom-made phantom, compatible with the Leksell stereotactic frame model G and encompassing 947 control points (CPs), was utilized. MR images were obtained with and without the frame, thus allowing discrimination of frame-induced distortions. In the absence of the frame and following compensation for field inhomogeneities, measured average CP disposition owing to gradient nonlinearities was 0.53 mm. In presence of the frame, contrarily, detected distortion was greatly increased (up to about 5 mm) in the vicinity of the frame base due to eddy currents induced in the closed loop of its aluminum material. Frame-related distortion was obliterated at approximately 90 mm from the frame base. Although the region with the maximum observed distortion may not lie within the GK treatable volume, the presence of the frame results in distortion of the order of 1.5 mm at a 7 cm distance from the center of the Leksell space. Additionally, severe distortions observed outside the treatable volume could possibly impinge on the delivery accuracy mainly by adversely affecting the registration process (e.g. the position of the lower part of the N-shaped fiducials used to define the stereotactic space may be miss-registered). Images acquired with a modified version of the frame developed by replacing its front side with an acrylic bar, thus interrupting the closed aluminum loop and reducing the induced eddy currents, were shown to benefit from relatively reduced distortion. System-related distortion was also identified in patient MR images. Using corresponding CT angiography images as a reference, an offset of 1.1 mm was detected for two vessels lying in close proximity to the frame base, while excellent spatial agreement was observed for a vessel far apart from the frame base.

Characterization of system-related geometric distortions in MR images employed in Gamma Knife radiosurgery applications

NASA Astrophysics Data System (ADS)

Pappas, E. P.; Seimenis, I.; Moutsatsos, A.; Georgiou, E.; Nomikos, P.; Karaiskos, P.

2016-10-01

This work provides characterization of system-related geometric distortions present in MRIs used in Gamma Knife (GK) stereotactic radiosurgery (SRS) treatment planning. A custom-made phantom, compatible with the Leksell stereotactic frame model G and encompassing 947 control points (CPs), was utilized. MR images were obtained with and without the frame, thus allowing discrimination of frame-induced distortions. In the absence of the frame and following compensation for field inhomogeneities, measured average CP disposition owing to gradient nonlinearities was 0.53 mm. In presence of the frame, contrarily, detected distortion was greatly increased (up to about 5 mm) in the vicinity of the frame base due to eddy currents induced in the closed loop of its aluminum material. Frame-related distortion was obliterated at approximately 90 mm from the frame base. Although the region with the maximum observed distortion may not lie within the GK treatable volume, the presence of the frame results in distortion of the order of 1.5 mm at a 7 cm distance from the center of the Leksell space. Additionally, severe distortions observed outside the treatable volume could possibly impinge on the delivery accuracy mainly by adversely affecting the registration process (e.g. the position of the lower part of the N-shaped fiducials used to define the stereotactic space may be miss-registered). Images acquired with a modified version of the frame developed by replacing its front side with an acrylic bar, thus interrupting the closed aluminum loop and reducing the induced eddy currents, were shown to benefit from relatively reduced distortion. System-related distortion was also identified in patient MR images. Using corresponding CT angiography images as a reference, an offset of 1.1 mm was detected for two vessels lying in close proximity to the frame base, while excellent spatial agreement was observed for a vessel far apart from the frame base.

An MR/MRI compatible core holder with the RF probe immersed in the confining fluid.

PubMed

Shakerian, M; Balcom, B J

2018-01-01

An open frame RF probe for high pressure and high temperature MR/MRI measurements was designed, fabricated, and tested. The open frame RF probe was installed inside an MR/MRI compatible metallic core holder, withstanding a maximum pressure and temperature of 5000 psi and 80 °C. The open frame RF probe was tunable for both 1 H and 19 F resonance frequencies with a 0.2 T static magnetic field. The open frame structure was based on simple pillars of PEEK polymer upon which the RF probe was wound. The RF probe was immersed in the high pressure confining fluid during operation. The open frame structure simplified fabrication of the RF probe and significantly reduced the amount of polymeric materials in the core holder. This minimized the MR background signal detected. Phase encoding MRI methods were employed to map the spin density of a sulfur hexafluoride gas saturating a Berea core plug in the core holder. The SF 6 was imaged as a high pressure gas and as a supercritical fluid. Copyright © 2017 Elsevier Inc. All rights reserved.

Dielectric Elastomer Actuated Systems and Methods

NASA Technical Reports Server (NTRS)

Dubowsky, Steven (Inventor); Hafez, Moustapha (Inventor); Lichter, Matthew (Inventor); Weiss, Peter (Inventor); Wingert, Andreas (Inventor)

2008-01-01

The system of the present invention includes an actuator having at least two electrodes, an elastomeric dielectric film disposed between the two electrodes, and a frame attached to the elastomeric dielectric film. The frame provides a linear actuation force characteristic over a displacement range. The displacement range is preferably the stroke of the actuator. The displacement range can be about 5 mm and greater. Further, the frame can include a plurality of configurations, for example, at least a rigid members coupled to a flexible member wherein the frame provides an elastic restoring force. In preferred embodiments, the rigid member can be, but is not limited to, curved beams, parallel beams, rods and plates. In a preferred embodiment the actuator can further include a passive element disposed between two flexible members such as, for example, links to tune a stiffness characteristic of the actuator. The passive element can be a bi-stable element. Further, the actuator can include a plurality of layers of the elastomeric dielectric film integrated into the frame. The elastomeric film can be made of different materials such as, for example, acrylic, silicone and latex.

An MR/MRI compatible core holder with the RF probe immersed in the confining fluid

NASA Astrophysics Data System (ADS)

Shakerian, M.; Balcom, B. J.

2018-01-01

An open frame RF probe for high pressure and high temperature MR/MRI measurements was designed, fabricated, and tested. The open frame RF probe was installed inside an MR/MRI compatible metallic core holder, withstanding a maximum pressure and temperature of 5000 psi and 80 °C. The open frame RF probe was tunable for both 1H and 19F resonance frequencies with a 0.2 T static magnetic field. The open frame structure was based on simple pillars of PEEK polymer upon which the RF probe was wound. The RF probe was immersed in the high pressure confining fluid during operation. The open frame structure simplified fabrication of the RF probe and significantly reduced the amount of polymeric materials in the core holder. This minimized the MR background signal detected. Phase encoding MRI methods were employed to map the spin density of a sulfur hexafluoride gas saturating a Berea core plug in the core holder. The SF6 was imaged as a high pressure gas and as a supercritical fluid.

Frames of Reference in the Classroom

NASA Astrophysics Data System (ADS)

Grossman, Joshua

2012-12-01

The classic film "Frames of Reference"1,2 effectively illustrates concepts involved with inertial and non-inertial reference frames. In it, Donald G. Ivey and Patterson Hume use the cameras perspective to allow the viewer to see motion in reference frames translating with a constant velocity, translating while accelerating, and rotating—all with respect to the Earth frame. The film is a classic for good reason, but today it does have a couple of drawbacks: 1) The film by nature only accommodates passive learning. It does not give students the opportunity to try any of the experiments themselves. 2) The dated style of the 50-year-old film can distract students from the physics content. I present here a simple setup that can recreate many of the movies demonstrations in the classroom. The demonstrations can be used to supplement the movie or in its place, if desired. All of the materials except perhaps the inexpensive web camera should likely be available already in most teaching laboratories. Unlike previously described activities, these experiments do not require travel to another location3 or an involved setup.4,5

Retaining latch for a water pit gate

DOEpatents

Beale, A.R.

1997-11-18

A retaining latch is described for use in a hazardous materials storage or handling facility to adjustably retain a water pit gate in a gate frame. A retaining latch is provided comprising a latch plate which is rotatably mounted to each end of the top of the gate and a recessed opening, formed in the gate frame, for engaging an edge of the latch plate. The latch plate is circular in profile with one side cut away or flat, such that the latch plate is D-shaped. The remaining circular edge of the latch plate comprises steps of successively reduced thickness. The stepped edge of the latch plate fits inside a recessed opening formed in the gate frame. As the latch plate is rotated, alternate steps of the latch plate are engaged by the recessed opening. When the latch plate is rotated such that the flat portion of the latch plate faces the recessed opening in the gate frame, there is no connection between the opening and the latch plate and the gate is unlatched from the gate frame. 4 figs.

Caul and method for bonding and curing intricate composite structures

NASA Technical Reports Server (NTRS)

Willden, Kurtis S. (Inventor); Goodno, Kenneth N. (Inventor)

1993-01-01

The invention disclosed here is a method for forming and curing an intricate structure of criss-crossing composite stringers and frames that are bonded to a skin panel. A structure constructed in accordance with the invention would be well-suited for use as a portion of an aircraft fuselage, a boat hull, or the like. The method is preferably practiced by applying uncured composite stringers to an uncured composite sheet panel. This is followed by placing cured frames crosswise over the stringers. The frames have openings at the locations where they intersect with the stringers which enables the frames to come into direct contact with the skin along most of their length. During the forming and curing process, the stringers are covered with a plurality of cauls, and the entire assembly of skin panel, stringers, frames and cauls is subjected to a vacuum bagging and curing process. The cauls serve to maintain both part shape and to control the flow of resin within the stringers as they are cured. Further, they probably eliminate the need for intermediate protective materials between the vacuum bag and the stringers.

Elastomeric actuator devices for magnetic resonance imaging

NASA Technical Reports Server (NTRS)

Lichter, Matthew (Inventor); Wingert, Andreas (Inventor); Hafez, Moustapha (Inventor); Dubowsky, Steven (Inventor); Jolesz, Ferenc A. (Inventor); Kacher, Daniel F. (Inventor); Weiss, Peter (Inventor)

2008-01-01

The present invention is directed to devices and systems used in magnetic imaging environments that include an actuator device having an elastomeric dielectric film with at least two electrodes, and a frame attached to the actuator device. The frame can have a plurality of configurations including, such as, for example, at least two members that can be, but not limited to, curved beams, rods, plates, or parallel beams. These rigid members can be coupled to flexible members such as, for example, links wherein the frame provides an elastic restoring force. The frame preferably provides a linear actuation force characteristic over a displacement range. The linear actuation force characteristic is defined as .+-.20% and preferably 10% over a displacement range. The actuator further includes a passive element disposed between the flexible members to tune a stiffness characteristic of the actuator. The passive element can be a bi-stable element. The preferred embodiment actuator includes one or more layers of the elastomeric film integrated into the frame. The elastomeric film can be made of many elastomeric materials such as, for example, but not limited to, acrylic, silicone and latex.

Advances in modeling the pressure correlation terms in the second moment equations

NASA Technical Reports Server (NTRS)

Shih, Tsan-Hsing; Shabbir, Aamir; Lumley, John L.

1991-01-01

In developing turbulence models, various model constraints were proposed in an attempt to make the model equations more general (or universal). The most recent of these are the realizability principle, the linearity principle, the rapid distortion theory, and the material indifference principle. Several issues are discussed concerning these principles and special attention is payed to the realizability principle. Realizability (defined as the requirement of non-negative energy and Schwarz' inequality between any fluctuating quantities) is the basic physical and mathematical principle that any modeled equation should obey. Hence, it is the most universal, important and also the minimal requirement for a model equation to prevent it from producing unphysical results. The principle of realizability is described in detail, the realizability conditions are derived for various turbulence models, and the model forms are proposed for the pressure correlation terms in the second moment equations. Detailed comparisons of various turbulence models with experiments and direct numerical simulations are presented. As a special case of turbulence, the two dimensional two-component turbulence modeling is also discussed.

Visualization Based Data Mining for Comparison Between Two Solar Cell Libraries.

PubMed

Yosipof, Abraham; Kaspi, Omer; Majhi, Koushik; Senderowitz, Hanoch

2016-12-01

Material informatics may provide meaningful insights and powerful predictions for the development of new and efficient Metal Oxide (MO) based solar cells. The main objective of this paper is to establish the usefulness of data reduction and visualization methods for analyzing data sets emerging from multiple all-MOs solar cell libraries. For this purpose, two libraries, TiO 2 |Co 3 O 4 and TiO 2 |Co 3 O 4 |MoO 3 , differing only by the presence of a MoO 3 layer in the latter were analyzed with Principal Component Analysis and Self-Organizing Maps. Both analyses suggest that the addition of the MoO 3 layer to the TiO 2 |Co 3 O 4 library has affected the overall photovoltaic (PV) activity profile of the solar cells making the two libraries clearly distinguishable from one another. Furthermore, while MoO 3 had an overall favorable effect on PV parameters, a sub-population of cells was identified which were either indifferent to its presence or even demonstrated a reduction in several parameters. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Adhesives with wood materials : bond formation and performance

Treesearch

Charles R. Frihart; Christopher G. Hunt

2010-01-01

Adhesive bonding of wood plays an increasing role in the forest products industry and is a key factor for efficiently utilizing our timber resource. The main use of adhesives is in the manufacture of building materials, including plywood, oriented strandboard, particleboard, fiberboard, structural composite lumber, doors, windows and frames, and factory-laminated wood...

48 CFR 25.602-1 - Section 1605 of the Recovery Act.

Code of Federal Regulations, 2011 CFR

2011-10-01

... steel lock on the window frame; or (2) If trade agreements apply, the manufactured construction material... or public work is located in the United States and— (1) All of the iron, steel, and manufactured...) All manufactured construction material must be manufactured in the United States. (ii) Iron or steel...

48 CFR 25.602-1 - Section 1605 of the Recovery Act.

Code of Federal Regulations, 2010 CFR

2010-10-01

... steel lock on the window frame; or (2) If trade agreements apply, the manufactured construction material... or public work is located in the United States and— (1) All of the iron, steel, and manufactured...) All manufactured construction material must be manufactured in the United States. (ii) Iron or steel...

Representation of microstructural features and magnetic anisotropy of electrical steels in an energy-based vector hysteresis model

NASA Astrophysics Data System (ADS)

Jacques, Kevin; Steentjes, Simon; Henrotte, François; Geuzaine, Christophe; Hameyer, Kay

2018-04-01

This paper demonstrates how the statistical distribution of pinning fields in a ferromagnetic material can be identified systematically from standard magnetic measurements, Epstein frame or Single Sheet Tester (SST). The correlation between the pinning field distribution and microstructural parameters of the material is then analyzed.

78 FR 27953 - Notification of Proposed Production Activity, CNH America, LLC, Subzone 59B, (Agricultural...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-13

....14(b), FTZ activity would be limited to the specific foreign-status materials and components and... housings; vertical auger tubes; chopper drive gearbox accessories; cotton picker frames and cabs; and, non... components and materials sourced from abroad include: sealant; sealant paste; oil drain assemblies; rubber...

'I expected just to walk in, get my tablets and then walk out': on framing new community pharmacy services in the English healthcare system.

PubMed

Latif, Asam; Waring, Justin; Watmough, Deborah; Boyd, Matthew J; Elliott, Rachel A

2018-04-19

Reconfiguration of the healthcare division of labour is becoming increasingly attractive in the context of increased patient demand and resource constraints. One example is the introduction of extended roles for pharmacists to provide patients additional support to manage their medicines, while also reducing work pressures experienced by other health professionals. Understanding how such policies are framed by those delivering and receiving care has been under-theorised. Using Goffman's frame theory, we examine one newly introduced community pharmacy service (New Medicines Service (NMS)) to illustrate how a policy intended to support patient medicine-taking through the extended roles of pharmacists is framed and where this deviates from its proposed aims. Three themes emerged: (i) the spatial-material artefacts; (ii) existing discursive culture and practice around medicine-taking; and (iii) the NMS interactions that shape and govern framing and subsequent interpretation of the NMS. Our study offers an explanatory and dynamic view of the framing process with important lessons for reconfiguring medicine management policy and practice. As well as illustrating framing as being variegated, complementary or conflicting, it also shows how this plurality and fragility had consequences for patient engagement and sense-making. The consequences for engagement and recommendations for implementing future initiatives are discussed. © 2018 The Authors. Sociology of Health & Illness published by John Wiley & Sons Ltd on behalf of Foundation for SHIL.

Osseous Frame Index calculations of the early medieval South-West Germany.

PubMed

Jasch, Isabelle; Langer, Antje; Boley, Moritz; Mumm, Rebekka; Riesenberg, Martin; Mann, Robert; Wahl, Joachim

2018-05-15

The proper description of former populations is one of the most difficult tasks in anthropology. Archaeological material is often limited due to fragmented and sometimes poorly preserved bone material resulting in incomplete data. Published skeletal raw data are available from the past, but much of this data is either unavailable or not used for scientific studies. The authors seek to elicit more information about prehistoric times by using this dataset to introduce a new method. The purpose is to provide an approach to reconstruct a former population in respect to robusticity and health status. For this in the pilot study the Body Mass Index (BMI) and Frame Index (FI) of early medieval South-West Germany have been analysed. The FI, in contrast to the BMI, has not yet been used for robusticity analysis utilizing only skeletal remains. As far as we know, this is the first time that the FI has been calculated using archaeological material. Due to unknown soft-tissue thickness we introduce the Osseous Frame Index (OFI). The measured OFI reveals new insights in (pre-)historic populations and allows comparisons with modern reference samples. Our OFI calculations are relatively similar to modern calculations. Males have a higher robusticity than females, slightly increasing during life-time compared to females. These calculations provide a better historical understanding of human body composition.

7 CFR 275.4 - Record retention.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Stamps and Medicaid Quality Control Reviews, FNS-380-1, Integrated Review Schedule, FNS-245, Negative... materials supporting the review decision; sample lists; sampling frames; tabulation sheets; and reports of...

Hugh L. Dryden's Career in Aviation and Space. No. 5; Monographs in Aerospace History

NASA Technical Reports Server (NTRS)

Gorn, Michael H.

1996-01-01

Hugh Latimer Dryden led a life rich in paradox. Born in obsurity, he attained international prominence. Indifferent to self-advancement, he nonetheless rose to the pinnacle of the aeronautics profession and subsequently assumed a pivotal role in the initial period of space exploration. Although a research scientist of the first order, he nurtured within himself a profoundly spiritual outlook.

Boys of Few Words: Raising Our Sons to Communicate and Connect

ERIC Educational Resources Information Center

Cox, Adam J.

2006-01-01

When parents feel separated from their sons by a curtain of silence or a wall of resistance, they are right to be concerned. Boys of few words-the ones who limit their expression to a timid shrug or an indifferent grunt-need help. Whether the problem is rooted in "nature" or "nurture," boys who grow up unable to talk about their thoughts and…

The Relationship between Preschool Teachers' Professional Ethical Behavior Perceptions, Moral Judgment Levels and Attitudes to Teaching

ERIC Educational Resources Information Center

Oktay, Ayla; Ramazan, Oya; Sakin, Ahmet

2010-01-01

Morality is the stance and attitude that makes a social human being; the display of behaviors such as praise, criticism, tolerance and intolerance, confirmation and rejection; the taking of sides by stating what one finds good or bad, right or wrong, instead of staying indifferent to what other people say and do (Pieper, 1999). Moral development…

Federal Student Aid: Progress in Integrating Pell Grant and Direct Student Loan Systems and Processes, but Critical Work Remains. Report to the Secretary of Education.

ERIC Educational Resources Information Center

Powner, David A.

To address system problems and other management weaknesses, in 1998 Congress created the Office of Federal Student Aid (FSA) within the Department of Education. This office adopted a new approach to systems integration using middleware (software that can allow an application to access data residing indifferent databases) and Extensible Markup…

Behaviorism and Natural Selection

DTIC Science & Technology

1984-01-01

larger and new species, in other words, in evolution by natural sclec- grouping, the Virgo cluster . The iniverse at large is indifferent tion, a...PROGRAM ELEMENT, PROJECT, TASK Division of Neuropsychiatry AREA & WORK UNIT NUMBERS alter Reed Army Institute of Research ashington, D.C. 20307-5100...CONTROLLING OFFICE NAME AND ADDRESS 12. REPORT DATE .S. Army Medical Research & Development Command ort Detrick 13. NUMBER OF PAGES rederick, MD 21701

A Cross-Cultural Comparison of Kuwaiti and British Citizens' Views of E-Government Interface Quality

ERIC Educational Resources Information Center

Aladwani, Adel M.

2013-01-01

It is difficult to conceive how Web users from different cultures can be encouraged to reap the benefits of an e-government initiative when its portal is suffering from culture-indifferent interface quality. Thus far, the e-government literature not only has paid scanty attention to web evaluation issues but also has been slow to embarking on…

Stimulating translational research: several European life science institutions put their heads together.

PubMed

Bentires-Alj, Mohamed; Rajan, Abinaya; van Harten, Wim; van Luenen, Henri G A M; Kubicek, Stefan; Andersen, Jesper B; Saarela, Janna; Cook, Simon J; Van Minnebruggen, Geert; Roman-Roman, Sergio; Maurer, Cornelia; Erler, Janine T; Bertero, Michela G

2015-09-01

Translational research leaves no-one indifferent and everyone expects a particular benefit. We as EU-LIFE (www.eu-life.eu), an alliance of 13 research institutes in European life sciences, would like to share our experience in an attempt to identify measures to promote translational research without undermining basic exploratory research and academic freedom. Copyright © 2015 Elsevier Ltd. All rights reserved.

Evaluating multiple dimensions of visitors' tradeoffs between access and crowding at Arches National Park using indifference curve analysis

Treesearch

Steven R. Lawson; Robert E. Manning

2001-01-01

Tradeoffs are an inherent part of many of the decisions faced by outdoor recreation managers. For example, decisions concerning the social carrying capacity of popular attraction sites involve tradeoffs between limiting visitor use to ensure a high quality experience and allowing high levels of visitor use to ensure that large numbers of visitors retain access to park...

The Effect of Instruction on Socio-Cultural Beliefs Hindering the Learning of Science by a Sample of Nigerian Students.

ERIC Educational Resources Information Center

Jegede, Olugbemiro J.; Okebukola, Peter Akinsola O.

A learner who is not positively disposed to, or has a socio-cultural background that is indifferent to, learning science would find it hard to learn science effectively with the right attitudes. This study investigated if instruction through the use of the socio-cultural mode has any significant effect on a student's attitude towards the learning…

"Will You Please Sign on the Dotted Line?": A Problem-Based Learning Approach to Social Responsibility in Race, Gender, and Media Courses

ERIC Educational Resources Information Center

Jones, Eric K.

2011-01-01

One of the most common obstacles the author finds when teaching media literacy courses is student insensitivity. Although this can exist for many different reasons, the media critiques that students submit in this type of class indicate that they've become indifferent to misogynistic, classist, and racist stereotypes. On the collegiate level, this…

Using an Outranking Method Supporting the Acquisition of Military Equipment

DTIC Science & Technology

2009-10-01

selection methodology, taking several criteria into account. We show to what extent the class of PROMETHEE methods is presenting these features. We...functions, the indifference and preference thresholds and some other technical parameters. Then we discuss the capabilities of the PROMETHEE methods to...discuss the interpretation of the results given by these PROMETHEE methods. INTRODUCTION Outranking methods for multicriteria decision aid belong

Surface Material Characterization from Non-resolved Multi-band Optical Observations

DTIC Science & Technology

2012-09-01

functions ( BRDFs ) — then a forward model of the spectral signature of the entire body could be constructed by summing contributions from all reflecting...buffering). 3.3.2 Material Bi-directional Reflectance Distribution Functions ( BRDFs ) Notably, the satellite wire-frame and attitude models together...environments and/or created numerical BRDF models . For instance, BRDFs for several spacecraft materials — such as solar array panels, milled aluminum

Evaluation of the anti-Listeria potentials of some plant-derived triterpenes.

PubMed

Penduka, Dambudzo; Mosa, Rebamang; Simelane, Mthokozisi; Basson, Albert; Okoh, Anthony; Opoku, Andy

2014-07-23

Listeriosis is a fatal disease caused by pathogenic Listeria bacteria and it is most prevalent in immune-compromised individuals. The increase in numbers of immune-compromised individuals against a background of Listeria antibiotic resistance, limits listeriosis treatment options. This therefore calls for research into substitute treatments, of which, medicinal plants derived compounds offer a viable alternative. The broth microdilution assay was used to determine the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of three plant triterpenes namely 3β-hydroxylanosta-9,24-dien-21-oic acid, methyl-3β-hydroxylanosta-9,24-dien-21-oate and 3β-acetylursolic acid, against Listeria monocytogenes, Listeria ivanovii and Listeria grayi species. The chequerboard method was used to assess the interactions between the triterpenes and conventional antibiotics: ampicillin, neomycin, gentamicin and penicillin G. The lactate dehydrogenase membrane damage method was used to assess the triterpenes' membrane damaging potentials against the Listeria bacteria. The triterpenes' MIC values were found to range from 0.185 to 1.67 mg/ml while, the MBC determination assay results revealed that the test triterpenes were bacteriostatic against the Listeria bacteria. The interactions involving 3β-hydroxylanosta-9,24-dien-21-oic acid were mainly additive with ampicillin and synergistic with neomycin, gentamicin and penicillin G. The interactions involving methyl-3β-hydroxylanosta-9,24-dien-21-oate were mainly antagonistic with ampicillin, indifferent with neomycin, ranging from synergistic to indifference with gentamicin and synergistic with penicillin G. The interactions involving 3β-acetylursolic acid were mainly indifferent with ampicillin, synergistic with neomycin and gentamicin while ranging between synergistic and additive with penicillin G. The low levels of cytosolic lactate dehydrogenase released from the cells treated with 4× MIC concentration of the triterpenes in comparison to that of cells treated with 3% Triton X-100 proved that membrane damage was not the mode of action of the triterpenes. This study therefore shows the potential that these plant triterpenes have in listeriosis chemotherapy especially as shown by the favourable interactions they had with penicillin G, one of the antibiotics of choice in listeriosis treatment.

Systematization of ambiguous genitalia.

PubMed

Makiyan, Zograb

2016-10-01

Sex assignment in newborns depends on the anatomy of the external genitalia, despite this stage being the final in embryogenesis. According to the current view, the genital tubercle is the embryonic precursor of penis and clitoris. It originates from mesenchymal tissue, but mesenchymal cells are arranged across the embryonal body and do not have specific androgen receptors. The nature of the signal that initiates early derivation of the indifferent genital tubercle is unknown at present. The aims of this article are to improve surgical management of intersex disorders and investigate the development of the genital tubercle. Clinical examination of 114 females with various forms of DSD revealed ambiguous (bisexual) external genitalia in 73 patients, and 51 of them underwent feminizing surgery. Intersexuality (ambiguity) in 46,XY patients results from disruptors in the pathways of sex steroid hormones or receptors; in 46,XX females arises from excessive levels of androgens. Systematization of intersex disorders distinguishes the karyotype, gonadal morphology, and genital anatomy to provide a differential diagnosis and guide appropriate surgical management. Modified feminizing clitoroplasty with preservation of the dorsal and ventral neurovascular bundles to retain erogenous sensitivity was performed in females with severe virilization (Prader degree III-V). The outgrowth of the genital tubercle and the fusion of the urethral fold proceed in an ordered fashion; but in some cases of ambiguity, there was discordance due to different pathways. Speculation about the derivation of the genital tubercle have discussed with a literature review. The genital tubercle derives from the following 3 layers: the ectodermal glans of the tubercle, the mesodermal corpora cavernosa and the endodermal urogenital groove. According to the new hypothesis, during the indifferent stages, the 5 sacral somites have to recede from their segmentation and disintegrate: the sclerotomes form the pelvic bones, the fused myotomes follow with their genuine neurotomes and the angiotomes join to the corpora cavernosa of the genital tubercle. Sexual differentiation of external genitalia is final in gender embryogenesis, but surprisingly derivation of the indifferent genital tubercle from 5 somites occurs before gonadal and internal organs development.

Systematization of ambiguous genitalia

PubMed Central

Makiyan, Zograb

2016-01-01

ABSTRACT Sex assignment in newborns depends on the anatomy of the external genitalia, despite this stage being the final in embryogenesis. According to the current view, the genital tubercle is the embryonic precursor of penis and clitoris. It originates from mesenchymal tissue, but mesenchymal cells are arranged across the embryonal body and do not have specific androgen receptors. The nature of the signal that initiates early derivation of the indifferent genital tubercle is unknown at present. The aims of this article are to improve surgical management of intersex disorders and investigate the development of the genital tubercle. Clinical examination of 114 females with various forms of DSD revealed ambiguous (bisexual) external genitalia in 73 patients, and 51 of them underwent feminizing surgery. Intersexuality (ambiguity) in 46,XY patients results from disruptors in the pathways of sex steroid hormones or receptors; in 46,XX females arises from excessive levels of androgens. Systematization of intersex disorders distinguishes the karyotype, gonadal morphology, and genital anatomy to provide a differential diagnosis and guide appropriate surgical management. Modified feminizing clitoroplasty with preservation of the dorsal and ventral neurovascular bundles to retain erogenous sensitivity was performed in females with severe virilization (Prader degree III-V). The outgrowth of the genital tubercle and the fusion of the urethral fold proceed in an ordered fashion; but in some cases of ambiguity, there was discordance due to different pathways. Speculation about the derivation of the genital tubercle have discussed with a literature review. The genital tubercle derives from the following 3 layers: the ectodermal glans of the tubercle, the mesodermal corpora cavernosa and the endodermal urogenital groove. According to the new hypothesis, during the indifferent stages, the 5 sacral somites have to recede from their segmentation and disintegrate: the sclerotomes form the pelvic bones, the fused myotomes follow with their genuine neurotomes and the angiotomes join to the corpora cavernosa of the genital tubercle. Sexual differentiation of external genitalia is final in gender embryogenesis, but surprisingly derivation of the indifferent genital tubercle from 5 somites occurs before gonadal and internal organs development. PMID:27391116

The "Transport Specificity Ratio": a structure-function tool to search the protein fold for loci that control transition state stability in membrane transport catalysis

PubMed Central

King, Steven C

2004-01-01

Background In establishing structure-function relationships for membrane transport proteins, the interpretation of phenotypic changes can be problematic, owing to uncertainties in protein expression levels, sub-cellular localization, and protein-folding fidelity. A dual-label competitive transport assay called "Transport Specificity Ratio" (TSR) analysis has been developed that is simple to perform, and circumvents the "expression problem," providing a reliable TSR phenotype (a constant) for comparison to other transporters. Results Using the Escherichia coli GABA (4-aminobutyrate) permease (GabP) as a model carrier, it is demonstrated that the TSR phenotype is largely independent of assay conditions, exhibiting: (i) indifference to the particular substrate concentrations used, (ii) indifference to extreme changes (40-fold) in transporter expression level, and within broad limits (iii) indifference to assay duration. The theoretical underpinnings of TSR analysis predict all of the above observations, supporting that TSR has (i) applicability in the analysis of membrane transport, and (ii) particular utility in the face of incomplete information on protein expression levels and initial reaction rate intervals (e.g., in high-throughput screening situations). The TSR was used to identify gab permease (GabP) variants that exhibit relative changes in catalytic specificity (kcat/Km) for [14C]GABA (4-aminobutyrate) versus [3H]NA (nipecotic acid). Conclusions The TSR phenotype is an easily measured constant that reflects innate molecular properties of the transition state, and provides a reliable index of the difference in catalytic specificity that a carrier exhibits toward a particular pair of substrates. A change in the TSR phenotype, called a Δ(TSR), represents a specificity shift attributable to underlying changes in the intrinsic substrate binding energy (ΔGb) that translocation catalysts rely upon to decrease activation energy (). TSR analysis is therefore a structure-function tool that enables parsimonious scanning for positions in the protein fold that couple to the transition state, creating stability and thereby serving as functional determinants of catalytic power (efficiency, or specificity). PMID:15548327

Selection of nutrient used in biogenic healing agent for cementitious materials

NASA Astrophysics Data System (ADS)

Tziviloglou, Eirini; Wiktor, Virginie; Jonkers, Henk M.; Schlangen, Erik

2017-06-01

Biogenic self-healing cementitious materials target on the closure of micro-cracks with precipitated inorganic minerals originating from bacterial metabolic activity. Dormant bacterial spores and organic mineral compounds often constitute a biogenic healing agent. The current paper focuses on the investigation of the most appropriate organic carbon source to be used as component of a biogenic healing agent. It is of great importance to use an appropriate organic source, since it will firstly ensure an optimal bacterial performance in terms of metabolic activity, while it should secondly affect the least the properties of the cementitious matrix. The selection is made among three different organic compounds, namely calcium lactate, calcium acetate and sodium gluconate. The methodology that was used for the research was based on continuous and non-continuous oxygen consumption measurements of washed bacterial cultures and on compressive strength tests on mortar cubes. The oxygen consumption investigation revealed a preference for calcium lactate and acetate, but an indifferent behaviour for sodium gluconate. The compressive strength on mortar cubes with different amounts of either calcium lactate or acetate (up to 2.24% per cement weight) was not or it was positively affected when the compounds were dissolved in the mixing water. In fact, for calcium lactate the increase in compressive strength reached 8%, while for calcium acetate the maximum strength increase was 13.4%.

Membrane Tension Control

NASA Technical Reports Server (NTRS)

Su, Ji (Inventor); Harrison, Joycelyn S. (Inventor)

2005-01-01

An electrostrictive polymer actuator comprises an electrostrictive polymer with a tailorable Poisson's ratio. The electrostrictive polymer is electroded on its upper and lower surfaces and bonded to an upper material layer. The assembly is rolled tightly and capped at its ends. In a membrane structure having a membrane, a supporting frame and a plurality of threads connecting the membrane to the frame, an actuator can be integrated into one or more of the plurality of threads. The electrostrictive polymer actuator displaces along its longitudinal axis, thereby affecting movement of the membrane surface.

Retractable Sun Shade

NASA Technical Reports Server (NTRS)

Frank, A.; Derespinis, S. F.; Mockovciak, John, Jr.

1986-01-01

Window-shade type spring roller contains blanket, taken up by rotating cylindrical frame and held by frame over area to be shaded. Blanket made of tough, opaque polyimide material. Readily unfurled by mechanism to protect space it encloses from Sun. Blanket forms arched canopy over space and allows full access to it from below. When shading not needed, retracted mechanism stores blanket compactly. Developed for protecting sensitive Space Shuttle payloads from direct sunlight while cargo-bay doors open. Adapted to shading of greenhouses, swimming pools, and boats.

Analytical Approach to Large Deformation Problems of Frame Structures

NASA Astrophysics Data System (ADS)

Ohtsuki, Atsumi; Ellyin, Fernand

In elements used as flexible linking devices and structures, the main characteristic is a fairly large deformation without exceeding the elastic limit of the material. This property is of both analytical and technological interests. Previous studies of large deformation have been generally concerned with a single member (e.g. a cantilever beam, a simply supported beam, etc.). However, there are very few large deformation studies of assembled members such as frames. This paper deals with a square frame with rigid joints, loaded diagonally in either tension or compression by a pair of opposite forces. Analytical solutions for large deformation are obtained in terms of elliptic integrals, and are compared with the experimental data. The agreement is found to be fairly close.

Data resulting from the CFD analysis of ten window frames according to the UNI EN ISO 10077-2.

PubMed

Baglivo, Cristina; Malvoni, Maria; Congedo, Paolo Maria

2016-09-01

Data are related to the numerical simulation performed in the study entitled "CFD modeling to evaluate the thermal performances of window frames in accordance with the ISO 10077" (Malvoni et al., 2016) [1]. The paper focuses on the results from a two-dimensional numerical analysis for ten frame sections suggested by the ISO 10077-2 and performed using GAMBIT 2.2 and ANSYS FLUENT 14.5 CFD code. The dataset specifically includes information about the CFD setup and boundary conditions considered as the input values of the simulations. The trend of the isotherms points out the different impacts on the thermal behaviour of all sections with air solid material or ideal gas into the cavities.

Theoretical and methodological approaches in discourse analysis.

PubMed

Stevenson, Chris

2004-10-01

Discourse analysis (DA) embodies two main approaches: Foucauldian DA and radical social constructionist DA. Both are underpinned by social constructionism to a lesser or greater extent. Social constructionism has contested areas in relation to power, embodiment, and materialism, although Foucauldian DA does focus on the issue of power. Embodiment and materialism may be especially relevant for researchers of nursing where the physical body is prominent. However, the contested nature of social constructionism allows a fusion of theoretical and methodological approaches tailored to a specific research interest. In this paper, Chris Stevenson suggests a frame- work for working out and declaring the DA approach to be taken in relation to a research area, as well as to aid anticipating methodological critique. Method, validity, reliability and scholarship are discussed from within a discourse analytic frame of reference.

Colors and Photometry of Bright Materials on Vesta as Seen by the Dawn Framing Camera

NASA Technical Reports Server (NTRS)

Schroeder, S. E.; Li, J.-Y.; Mittlefehldt, D. W.; Pieters, C. M.; De Sanctis, M. C.; Hiesinger, H.; Blewett, D. T.; Russell, C. T.; Raymond, C. A.; Keller, H. U.;

Developing spiritually framed breast cancer screening messages in consultation with African American women.

PubMed

Best, Alicia L; Spencer, Mindi; Hall, Ingrid J; Friedman, Daniela B; Billings, Deborah

2015-01-01

Despite efforts to increase breast cancer screening (BCS) among African American women, disparities in breast cancer mortality persist. Culturally framed health communication may provide a useful strategy to address this issue. Spirituality not only represents an integral aspect of African American culture, but it has also been identified as a potential barrier to BCS among this population. Rather than continuing to focus on spirituality as a barrier, there is an opportunity to develop promotional messages that tap into the protective properties of spirituality among this population. The goals of this study were to engage a group of African American women to identify important spiritual elements to be included in health communication materials, and to subsequently develop a spiritually framed BCS message in response to their feedback. Three nominal group sessions were conducted with 15 African American women. Results revealed three important spiritual elements that can be incorporated into BCS health messages: (a) the body as a temple; (b) going to the doctor does not make you faithless; and (c) God did not give us the spirit of fear. These elements were used to draft a spiritually framed BCS message. Next, 20 face-to-face semistructured interviews were conducted to help finalize the spiritually framed BCS message for use in a future study on culturally framed health communication.

Multicriteria Analysis of Assembling Buildings from Steel Frame Structures

NASA Astrophysics Data System (ADS)

Miniotaite, Ruta

2017-10-01

Steel frame structures are often used in the construction of public and industrial buildings. They are used for: all types of slope roofs; walls of newly-built public and industrial buildings; load bearing structures; roofs of renovated buildings. The process of assembling buildings from steel frame structures should be analysed as an integrated process influenced by such factors as construction materials and machinery used, the qualification level of construction workers, complexity of work, available finance. It is necessary to find a rational technological design solution for assembling buildings from steel frame structures by conducting a multiple criteria analysis. The analysis provides a possibility to evaluate the engineering considerations and find unequivocal solutions. The rational alternative of a complex process of assembling buildings from steel frame structures was found through multiple criteria analysis and multiple criteria evaluation. In multiple criteria evaluation of technological solutions for assembling buildings from steel frame structures by pairwise comparison method the criteria by significance are distributed as follows: durability is the most important criterion in the evaluation of alternatives; the price (EUR/unit of measurement) of a part of assembly process; construction workers’ qualification level (category); mechanization level of a part of assembling process (%), and complexity of assembling work (in points) are less important criteria.

Capability to Recover Plutonium-238 in H-Canyon/HB-Line - 13248

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fuller, Kenneth S. Jr.; Smith, Robert H. Jr.; Goergen, Charles R.

2013-07-01

Plutonium-238 is used in Radioisotope Thermoelectric Generators (RTGs) to generate electrical power and in Radioisotope Heater Units (RHUs) to produce heat for electronics and environmental control for deep space missions. The domestic supply of Pu-238 consists of scrap material from previous mission production or material purchased from Russia. Currently, the United States has no significant production scale operational capability to produce and separate new Pu-238 from irradiated neptunium-237 targets. The Department of Energy - Nuclear Energy is currently evaluating and developing plans to reconstitute the United States capability to produce Pu-238 from irradiated Np-237 targets. The Savannah River Site hadmore » previously produced and/or processed all the Pu-238 utilized in Radioisotope Thermoelectric Generators (RTGs) for deep space missions up to and including the majority of the plutonium for the Cassini Mission. The previous full production cycle capabilities included: Np- 237 target fabrication, target irradiation, target dissolution and Np-237 and Pu-238 separation and purification, conversion of Np-237 and Pu-238 to oxide, scrap recovery, and Pu-238 encapsulation. The capability and equipment still exist and could be revitalized or put back into service to recover and purify Pu-238/Np-237 or broken General Purpose Heat Source (GPHS) pellets utilizing existing process equipment in HB-Line Scrap Recovery, and H-Canyon Frame Waste Recovery processes. The conversion of Np-237 and Pu-238 to oxide can be performed in the existing HB-Line Phase-2 and Phase- 3 Processes. Dissolution of irradiated Np-237 target material, and separation and purification of Np-237 and Pu-238 product streams would be possible at production rates of ∼2 kg/month of Pu-238 if the existing H-Canyon Frames Process spare equipment were re-installed. Previously, the primary H-Canyon Frames equipment was removed to be replaced: however, the replacement project was stopped. The spare equipment is stored and still available for installation. Out of specification Pu-238 scrap material can be purified and recovered by utilizing the HB-Line Phase- 1 Scrap Recovery Line and the Phase-3 Pu-238 Oxide Conversion Line along with H-Canyon Frame Waste Recovery process. In addition, it also covers and describes utilizing the Phase-2 Np-237 Oxide Conversion Line, in conjunction with the H-Canyon Frames Process to restore the H-Canyon capability to process and recover Np-237 and Pu-238 from irradiated Np-237 targets and address potential synergies with other programs like recovery of Pu-244 and heavy isotopes of curium from other target material. (authors)« less

Flexible and self-powered temperature-pressure dual-parameter sensors using microstructure-frame-supported organic thermoelectric materials.

PubMed

Zhang, Fengjiao; Zang, Yaping; Huang, Dazhen; Di, Chong-an; Zhu, Daoben

2015-09-21

Skin-like temperature- and pressure-sensing capabilities are essential features for the next generation of artificial intelligent products. Previous studies of e-skin and smart elements have focused on flexible pressure sensors, whereas the simultaneous and sensitive detection of temperature and pressure with a single device remains a challenge. Here we report developing flexible dual-parameter temperature-pressure sensors based on microstructure-frame-supported organic thermoelectric (MFSOTE) materials. The effective transduction of temperature and pressure stimuli into two independent electrical signals permits the instantaneous sensing of temperature and pressure with an accurate temperature resolution of <0.1 K and a high-pressure-sensing sensitivity of up to 28.9 kPa(-1). More importantly, these dual-parameter sensors can be self-powered with outstanding sensing performance. The excellent sensing properties of MFSOTE-based devices, together with their unique advantages of low cost and large-area fabrication, make MFSOTE materials possess promising applications in e-skin and health-monitoring elements.

Flexible and self-powered temperature-pressure dual-parameter sensors using microstructure-frame-supported organic thermoelectric materials

NASA Astrophysics Data System (ADS)

Zhang, Fengjiao; Zang, Yaping; Huang, Dazhen; di, Chong-An; Zhu, Daoben

2015-09-01

Skin-like temperature- and pressure-sensing capabilities are essential features for the next generation of artificial intelligent products. Previous studies of e-skin and smart elements have focused on flexible pressure sensors, whereas the simultaneous and sensitive detection of temperature and pressure with a single device remains a challenge. Here we report developing flexible dual-parameter temperature-pressure sensors based on microstructure-frame-supported organic thermoelectric (MFSOTE) materials. The effective transduction of temperature and pressure stimuli into two independent electrical signals permits the instantaneous sensing of temperature and pressure with an accurate temperature resolution of <0.1 K and a high-pressure-sensing sensitivity of up to 28.9 kPa-1. More importantly, these dual-parameter sensors can be self-powered with outstanding sensing performance. The excellent sensing properties of MFSOTE-based devices, together with their unique advantages of low cost and large-area fabrication, make MFSOTE materials possess promising applications in e-skin and health-monitoring elements.

Raunch or Romance? Framing and Interpreting the Relationship between Sexualized Culture and Young People's Sexual Health

ERIC Educational Resources Information Center

Bale, Clare

2011-01-01

The increase in exposure to sexually explicit material has been cited as a significant factor influencing adolescent sexuality and health. Concern about the negative impact of this material is increasingly prominent within policy, professional groups, and the media. Little research, however, has been conducted within this area. This article…

Chioke Harris | NREL

Science.gov Websites

transfer and materials science to the development of high-performance building components. He is member of the Building Energy Science Group, his research focuses on the application of fundamental heat particularly interested in the development of novel opaque insulation and window frame materials using nano

36 CFR 71.4 - Posting.

Code of Federal Regulations, 2011 CFR

2011-07-01

... constructed of enameled steel, coated aluminum, silk screen reflective materials attached to wood or metal, or... midnight blue) enclosed within a circle (colored white with a midnight blue border) framed by a rounded...

36 CFR 71.4 - Posting.

Code of Federal Regulations, 2010 CFR

2010-07-01

... constructed of enameled steel, coated aluminum, silk screen reflective materials attached to wood or metal, or... midnight blue) enclosed within a circle (colored white with a midnight blue border) framed by a rounded...

46 CFR 42.15-10 - Doors.

Code of Federal Regulations, 2010 CFR

2010-10-01

... superstructures shall be fitted with doors of steel or other equivalent material, permanently and strongly attached to the bulkhead, and framed, stiffened and fitted so that the whole structure is of equivalent...

46 CFR 42.15-10 - Doors.

Code of Federal Regulations, 2011 CFR

2011-10-01

... superstructures shall be fitted with doors of steel or other equivalent material, permanently and strongly attached to the bulkhead, and framed, stiffened and fitted so that the whole structure is of equivalent...

46 CFR 42.15-10 - Doors.

Code of Federal Regulations, 2013 CFR

2013-10-01

... superstructures shall be fitted with doors of steel or other equivalent material, permanently and strongly attached to the bulkhead, and framed, stiffened and fitted so that the whole structure is of equivalent...

46 CFR 42.15-10 - Doors.

Code of Federal Regulations, 2014 CFR

2014-10-01

... superstructures shall be fitted with doors of steel or other equivalent material, permanently and strongly attached to the bulkhead, and framed, stiffened and fitted so that the whole structure is of equivalent...

46 CFR 42.15-10 - Doors.

Code of Federal Regulations, 2012 CFR

2012-10-01

... superstructures shall be fitted with doors of steel or other equivalent material, permanently and strongly attached to the bulkhead, and framed, stiffened and fitted so that the whole structure is of equivalent...

Integrated Multilayer Insulation

NASA Technical Reports Server (NTRS)

Dye, Scott

2009-01-01

Integrated multilayer insulation (IMLI) is being developed as an improved alternative to conventional multilayer insulation (MLI), which is more than 50 years old. A typical conventional MLI blanket comprises between 10 and 120 metallized polymer films separated by polyester nets. MLI is the best thermal- insulation material for use in a vacuum, and is the insulation material of choice for spacecraft and cryogenic systems. However, conventional MLI has several disadvantages: It is difficult or impossible to maintain the desired value of gap distance between the film layers (and consequently, it is difficult or impossible to ensure consistent performance), and fabrication and installation are labor-intensive and difficult. The development of IMLI is intended to overcome these disadvantages to some extent and to offer some additional advantages over conventional MLI. The main difference between IMLI and conventional MLI lies in the method of maintaining the gaps between the film layers. In IMLI, the film layers are separated by what its developers call a micro-molded discrete matrix, which can be loosely characterized as consisting of arrays of highly engineered, small, lightweight, polymer (typically, thermoplastic) frames attached to, and placed between, the film layers. The term "micro-molded" refers to both the smallness of the frames and the fact that they are fabricated in a process that forms precise small features, described below, that are essential to attainment of the desired properties. The term "discrete" refers to the nature of the matrix as consisting of separate frames, in contradistinction to a unitary frame spanning entire volume of an insulation blanket.

Recycling-oriented characterization of plastic frames and printed circuit boards from mobile phones by electronic and chemical imaging.

PubMed

Palmieri, Roberta; Bonifazi, Giuseppe; Serranti, Silvia

2014-11-01

This study characterizes the composition of plastic frames and printed circuit boards from end-of-life mobile phones. This knowledge may help define an optimal processing strategy for using these items as potential raw materials. Correct handling of such a waste is essential for its further "sustainable" recovery, especially to maximize the extraction of base, rare and precious metals, minimizing the environmental impact of the entire process chain. A combination of electronic and chemical imaging techniques was thus examined, applied and critically evaluated in order to optimize the processing, through the identification and the topological assessment of the materials of interest and their quantitative distribution. To reach this goal, end-of-life mobile phone derived wastes have been systematically characterized adopting both "traditional" (e.g. scanning electronic microscopy combined with microanalysis and Raman spectroscopy) and innovative (e.g. hyperspectral imaging in short wave infrared field) techniques, with reference to frames and printed circuit boards. Results showed as the combination of both the approaches (i.e. traditional and classical) could dramatically improve recycling strategies set up, as well as final products recovery. Copyright © 2014 Elsevier Ltd. All rights reserved.

Sources of Variation in Creep Testing

NASA Technical Reports Server (NTRS)

Loewenthal, William S.; Ellis, David L.

2011-01-01

Creep rupture is an important material characteristic for the design of rocket engines. It was observed during the characterization of GRCop-84 that the complete data set had nearly 4 orders of magnitude of scatter. This scatter likely confounded attempts to determine how creep performance was influenced by manufacturing. It was unclear if this variation was from the testing, the material, or both. Sources of variation were examined by conducting tests on identically processed specimens at the same specified stresses and temperatures. Significant differences existed between the five constant-load creep frames. The specimen temperature was higher than the desired temperature by as much as 43 C. It was also observed that the temperature gradient was up to 44 C. Improved specimen temperature control minimized temperature variations. The data from additional tests demonstrated that the results from all five frames were comparable. The variation decreased to 1/2 order of magnitude from 2 orders of magnitude for the baseline data set. Independent determination of creep rates in a reference load frame closely matched the creep rates determined after the modifications. Testing in helium tended to decrease the sample temperature gradient, but helium was not a significant improvement over vacuum.

JPRS Report, Soviet Union. Aviation & Cosmonautics, No. 6, June 1988

DTIC Science & Technology

1988-12-12

squadron party organi- zation. Party members self -critically assessed their activ- ities, held violators and indifferent individuals strictly to account...courage, self -control, and decisiveness as well. These in-flight emergencies did not catch them napping. Maj A. Smir- nov safely brought his helicopter...this mood and attitude. We therefore consider everything which would help raise the level of all our pedagogic activities. I should note that this

JPRS Report, Soviet Union, World Economy & International Relations, No. 4, April 1987

DTIC Science & Technology

1987-08-28

revolutionary and who are totally suited by economic stagnation and the conservation of elements of social corrosion, social indifference and crisis ...important features and singularities of the general crisis of capitalism in the current situation and determine factors of its further...were made the basis of the concept of the three stages of the general crisis of capitalism, which was formulated by creative Marxist-Leninist thought

Distributed Knowledge Base Systems for Diagnosis and Information Retrieval.

DTIC Science & Technology

1988-04-08

cycle. For example, patients with cerebral palsy , a disease affecting motor control, typically have several muscles that function improperly in...different phases of the gait cycle. The malfunctions in the case of cerebral palsy are improper contractions of the muscles -- both in terms of the...generally resulted in the neural network level not being a serious contender for Al theory formation and system construction until a new generation

Improving Students' Understanding of the Connections between the Concepts of Real-Gas Mixtures, Gas Ideal-Solutions, and Perfect-Gas Mixtures

ERIC Educational Resources Information Center

Privat, Romain; Jaubert, Jean-Noël; Moine, Edouard

2016-01-01

In many textbooks of chemical-engineering thermodynamics, a gas mixture obeying the fundamental law pV[subscript m] = RT is most often called ideal-gas mixture (in some rare cases, the term perfect-gas mixture can be found). These textbooks also define the fundamental concept of ideal solution which in theory, can be applied indifferently to…

Effect of Various Interface Thicknesses on the Behaviour of Infilled frame Subjected to Lateral Load

NASA Astrophysics Data System (ADS)

Senthil, K.; Muthukumar, S.; Rupali, S.; Satyanarayanan, K. S.

2018-03-01

Two dimensional numerical investigations were carried out to study the influence of interface thickness on the behaviour of reinforced concrete frames subjected to in-plane lateral loads using commercial finite element tool SAP 2000. The cement mortar, cork and foam was used as interface material and their effect was studied by varying thicknesses as 6, 8, 10, 14 and 20 mm. The effect of lateral loads on infill masonry wall was also studied by varying arbitrary loads as 10, 20, 40 and 60 kN. The resistance of the frame with cement mortar was found maximum with the interface thickness 10 mm therefore, it is concluded that the maximum influence of interface thickness of 10 mm was found effective. The resistance of integral infill frame with cork and foam interface was found maximum with the interface thickness 6 mm and it is concluded that 6 mm thick interface among the chosen thickness was found effective.

Three solutions to a single problem: alternative casting frames for treating infantile idiopathic scoliosis.

PubMed

Halanski, Matthew A; Harper, Benjamin L; Cassidy, Jeffry A; Crawford, Haemish A

2013-07-01

This is a technique article discussing 3 alternative frames for casting children with infantile scoliosis. To provide surgeons with alternatives to expensive specialized casting tables to allow local treatment of these children utilizing readily available materials present at most institutions. Casting for infantile scoliosis has become more popular as reports have shown promising results with this technique without the morbidity and complications associated with more invasive procedures. However, without a specialized casting table, treating these patients has been limited to a few centers throughout the country often causing patients to travel large distances to receive care. Three different alternatives to commercially available casting frames are presented. Requirements, setup, and techniques are discussed. Each surgeon has had success with each of these frames. These provide adequate support and traction while allowing enough access to the trunk to apply a well-molded cast. Cotrel/Metha casting for infantile scoliosis can be accomplished without a specialized table using commonly available equipment.

Synergistic interaction of Helichrysum pedunculatum leaf extracts with antibiotics against wound infection associated bacteria.

PubMed

Aiyegoro, Olayinka A; Afolayan, Anthony J; Okoh, Anthony I

2009-01-01

The effect of combinations of the crude methanolic extract of the leaves of Helichrysum pedunculatum and eight first-line antibiotics were investigated by time kill assays against a panel of bacterial strains that have been implicated in wound infections. The plant extract showed appreciable antibacterial activities against the test bacteria with zones of inhibition ranging between 18 and 27 mm, and minimum inhibitory concentrations (MICs) varying between 0.1 and 5.0 mg/ml. The MICs of the test antibiotics range between 0.001 and 0.412 mg/ml, and combination of the plant extract and the antibiotics resulted in reduction of bacterial counts by between 0 and 6.63 Log10 cfu/ml. At V2 MIC, 56.81% synergy; 43.19% indifference and no antagonism were observed, and at MIC levels, 55.68% synergy; 44.32% indifference and no antagonism were observed when the extracts were combined with eight different antibiotics. In all, 60% of the interactions were synergistic. All combination regimes on Staphylococcus aureus ATCC 6538 yielded no synergy, neither was antagonism detected in any of the assays. We propose that extracts of the leaves of Helichrysum pedunculatum could be of relevance in combination therapy and as a source of resistance modifying principies that could be useful as treatment options for persistent wound infections.

[Intercultural health care policy from the perspective of health care providers and Mapuche clients].

PubMed

Alarcón, Ana María; Astudillo, Paula; Barrios, Sara; Rivas, Edith

2004-09-01

Intercultural health is becoming an emergent topic in the design of health care programs for Mapuche people of Chile. This process faces important challenges such as the scarce theoretical support about the meaning of intercultural health and their practical consequences for providers and clients. To explore the perception in providers and Mapuche clients about intercultural health. A survey performed in 11 counties with the highest concentration of Mapuche people, of the IX region of Chile. The perception about the development of a new health policy specially designed for Mapuche patients was surveyed in 399 Mapuche patients and 64 providers of primary health care centers. Mapuche clients considered, as the main regional challenges, the indifference and discrimination of health care teams towards Mapuche patients, aggravated by the indifference of authorities. Providers considered that the main problem was a lack of knowledge about Mapuche culture and skills to deal with this ethnic group. Patients and providers agreed on the need to use Mapuche dialect in health care attentions, to coordinate actions with traditional healers and to accept ethnical therapeutic practices. There is scarce agreement between providers and Mapuche clients about the need for an special intercultural health policy, its contents, and the regional conditions for its implementation and development.

Helping professionals and Border Force secrecy: effective asylum-seeker healthcare requires independence from callous policies.

PubMed

Dudley, Michael

2016-02-01

To examine the Australian Border Force Act (BFA) and its context, its implications for asylum-seeker healthcare and professionals, and contemporary and historical parallels. Prolonged immigration detention and policies aiming to deter irregular migration cause maritime asylum-seekers undeniable, well-publicised harms and (notwithstanding claims about preventing drownings) show reckless indifference and calculated cruelty. Service personnel may be harmed. Such policies misuse helping professionals to underwrite state abuses and promote public numbing and indifference, resembling other state abuses in the 'war on terror' and (with qualification) historical counterparts, e.g. Nazi Germany. Human service practitioners and organisations recently denounced the BFA that forbids disclosure about these matters.Continuing asylum-seeker healthcare balances the likelihood of effective care and monitoring with lending credibility to abuses. Boycotting it might sacrifice scrutiny and care, fail to compel professionals and affect temporary overseas workers. Entirely transferring healthcare from immigration to Federal and/or State health departments, with resources augmented to adequate standard, would strengthen clinical independence and quality, minimise healthcare's being securitised and politicised, and uphold ethical codes. Such measures will not resolve detention's problems, but coupled with independent auditing, would expose and moderate detention's worst effects, promoting changes in national conversation and policy-making. © The Royal Australian and New Zealand College of Psychiatrists 2016.

Children's responses to low parental mood. II: Associations with family perceptions of parenting styles and child distress.

PubMed

Solantaus-Simula, Tytti; Punamäki, Raija-Leena; Beardslee, William R

2002-03-01

In an earlier article (part 1) the authors identified four patterns of children's responses to parental low mood: Active Empathy, Emotional Overinvolvement, Indifference, and Avoidance. They then hypothesized that these response patterns were related to parenting styles and to discrepancies in family members' perceptions of parenting and child mental distress. A normal population sample of 990 twelve-year-old Finnish children and their mothers (843) and fathers (573) was used. Within-family multivariate analyses conducted in mother-father-child triads (470) were used to examine whether quality of parenting varied according to children's responses and whether parents' and children's perceptions of parenting and child distress were different. Children in the Active Empathy and Indifference groups experienced more positive parenting than those in the other two groups. Discrepancies in family members' perceptions of child distress and mothering and fathering were especially characteristic of the Emotional Overinvolvement group. Typical for the Avoidance group was a within-family agreement on poor parenting and severe child distress. Children's response patterns as regards parental low mood are related to family dynamics. The study suggests that discrepancies in parents' and children's perceptions of parenting and child distress can be meaningful in understanding family interactions and child development and well-being.

Characteristics of High School Students' and Science Teachers' Cognitive Frame about Effective Teaching Method for High School Science Subject

NASA Astrophysics Data System (ADS)

Chung, Duk Ho; Park, Kyeong-Jin; Cho, Kyu Seong

2016-04-01

We investigated the cognitive frame of high school students and inservice high school science teachers about effective teaching method, and we also explored how they understood about the teaching methods suggested by the 2009 revised Science Curriculum. Data were collected from 275 high school science teachers and 275 high school students. We analyzed data in terms of the words and the cognitive frame using the Semantic Network Analysis. The results were as follows. First, the teachers perceived that an activity oriented class was the effective science class that helped improve students'' problem-solving abilities and their inquiry skills. The students had the cognitive frame that their teacher had to present relevant and enough teaching materials to students, and that they should also receive assistance from teachers in science class to better prepare for college entrance exam. Second, both students and teachers retained the cognitive frame about the efficient science class that was not reflected 2009 revised Science Curriculum exactly. Especially, neither groups connected the elements of ''convergence'' as well as ''integration'' embedded across science subject areas to their cognitive frame nor cognized the fact that many science learning contents were closed related to one another. Therefore, various professional development opportunities should be offered so that teachers succinctly comprehend the essential features and the intents of the 2009 revised Science Curriculum and thereby implement it in their science lessons effectively. Keywords : semantic network analysis, cognitive frame, teaching method, science lesson

Numerical Analysis of a Masonry Panel Reinforced with Pultruded FRP Frames

NASA Astrophysics Data System (ADS)

Casalegno, C.; Russo, S.; Sciarretta, F.

2018-05-01

The paper presents a numerical study on the retrofit of traditional masonry with pultruded GFRP profile frames adjacent to a wall and connected to it by mechanical fasteners. This kind of retrofit solution, not having been explored yet either in theory or practice, is similar to the common steel frame retrofits, but offers the advantages of lightness and durability of FRP composite materials. The retrofit system proposed, once proven effective and advantageous, would bring a considerable potential innovation into its available options. Three different frame geometries and two cases of masonry thickness were considered to investigate the effectiveness of the retrofit GFRP frame on the inplane static response of the wall to horizontal loads. The global and local (connection) failure behavior of the wall-frame system was investigated using the 3D finite-element method. A general increase in strength after the retrofit, up to about 130%, was found, and a switch from rocking to the diagonal tension failure mode was observed. The strength hierarchy of the retrofitted systems was also analyzed to clarify the effectiveness of the retrofit in imparting a residual strength to masonry. A thinner masonry structure was clearly recognized to have got the greatest benefits, but the retrofit could also significantly improve the inplane shear strength of a thicker wall. A comparison with steel structures of analogous capacity in terms of weight and natural vibration frequencies supported the viability of composite FRP frames for retrofit.

Seismic damage to structures in the M s6.5 Ludian earthquake

NASA Astrophysics Data System (ADS)

Chen, Hao; Xie, Quancai; Dai, Boyang; Zhang, Haoyu; Chen, Hongfu

2016-03-01

On 3 August 2014, the Ludian earthquake struck northwest Yunnan Province with a surface wave magnitude of 6.5. This moderate earthquake unexpectedly caused high fatalities and great economic loss. Four strong motion stations were located in the areas with intensity V, VI, VII and IX, near the epicentre. The characteristics of the ground motion are discussed herein, including 1) ground motion was strong at a period of less than 1.4 s, which covered the natural vibration period of a large number of structures; and 2) the release energy was concentrated geographically. Based on materials collected during emergency building inspections, the damage patterns of adobe, masonry, timber frame and reinforced concrete (RC) frame structures in areas with different intensities are summarised. Earthquake damage matrices of local buildings are also given for fragility evaluation and earthquake damage prediction. It is found that the collapse ratios of RC frame and confined masonry structures based on the new design code are significantly lower than non-seismic buildings. However, the RC frame structures still failed to achieve the `strong column, weak beam' design target. Traditional timber frame structures with a light infill wall showed good aseismic performance.

Thermal Impact of Fasteners in High-Performance Wood-Framed Walls: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Christensen, D.

2011-01-01

Buildings are heavy consumers of energy, and residential building design is rapidly addressing topics to maximize energy conservation en route to net-zero energy consumption. Annual energy analysis of a building informs the choice among disparate energy measures, for cost, durability, occupant comfort, and whole-house energy use. Physics-based and empirical models of elements of a building are used in such analyses. High-performance wood-framed walls enable builders to construct homes that use much less than 40% of the energy consumed by similar homes built to minimum code. Modeling for these walls has considered physical features such as framing factor, insulation and framingmore » properties, roughness and convective effects, and air leakage. The thermal effects of fasteners used to construct these walls have not been fully evaluated, even though their thermal conductivity is orders of magnitudes higher than that of other building materials. Drywall screws and siding nails are considered in this finite element thermal conductivity analysis of wall sections that represent wood-framed walls that are often used in high-performance homes. Nails and screws reduce even the best walls' insulating performance by approximately 3% and become increasingly significant as the framing factor increases.« less

Split-screen display system and standardized methods for ultrasound image acquisition and multi-frame data processing

NASA Technical Reports Server (NTRS)

Selzer, Robert H. (Inventor); Hodis, Howard N. (Inventor)

2011-01-01

A standardized acquisition methodology assists operators to accurately replicate high resolution B-mode ultrasound images obtained over several spaced-apart examinations utilizing a split-screen display in which the arterial ultrasound image from an earlier examination is displayed on one side of the screen while a real-time "live" ultrasound image from a current examination is displayed next to the earlier image on the opposite side of the screen. By viewing both images, whether simultaneously or alternately, while manually adjusting the ultrasound transducer, an operator is able to bring into view the real-time image that best matches a selected image from the earlier ultrasound examination. Utilizing this methodology, dynamic material properties of arterial structures, such as IMT and diameter, are measured in a standard region over successive image frames. Each frame of the sequence has its echo edge boundaries automatically determined by using the immediately prior frame's true echo edge coordinates as initial boundary conditions. Computerized echo edge recognition and tracking over multiple successive image frames enhances measurement of arterial diameter and IMT and allows for improved vascular dimension measurements, including vascular stiffness and IMT determinations.

Effects of floor location on response of composite fuselage frames

NASA Technical Reports Server (NTRS)

Carden, Huey D.; Jones, Lisa E.; Fasanella, Edwin L.

1992-01-01

Experimental and analytical results are presented which show the effect of floor placement on the structural response and strength of circular fuselage frames constructed of graphite-epoxy composite material. The research was conducted to study the behavior of conventionally designed advanced composite aircraft components. To achieve desired new designs which incorporate improved energy absorption capabilities requires an understanding of how these conventional designs behave under crash type loadings. Data are presented on the static behavior of the composite structure through photographs of the frame specimen, experimental strain distributions, and through analytical data from composite structural models. An understanding of this behavior can aid the dynamist in predicting the crash behavior of these structures and may assist the designer in achieving improved designs for energy absorption and crash behavior of future structures.

Rolled-out collectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shurcliff, W.A.

1979-04-01

SolaRoll is a solar collector material composed of extruded strips of black ethylene propylene diene monomer (EPDM) that is suitable for water or air type collectors. SolaRoll is provided in rolls and consists of an absorber mat with tubes and fins and a framing strip comprising all the parts of the collector frame. The rolls are bent in a counterflow pattern to cover the entire collector area and the mat is fastened with a thermosetting mastic adhesive. The heat transfer fluid is plain water as freezing does not injure the EPDM. Installation of the glazing in the framing strip ismore » described. EPDM has the disadvantage of low thermal conductivity but its use does not require antifreeze or a heat exchanger. Design options and suitable applications of SolaRoll systems are discussed.« less

Research in structures, structural dynamics and materials, 1989

NASA Technical Reports Server (NTRS)

Hunter, William F. (Compiler); Noor, Ahmed K. (Compiler)

1989-01-01

Topics addressed include: composite plates; buckling predictions; missile launch tube modeling; structural/control systems design; optimization of nonlinear R/C frames; error analysis for semi-analytic displacement; crack acoustic emission; and structural dynamics.

Portable X-Ray, K-Edge Heavy Metal Detector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fricke, V.

The X-Ray, K-Edge Heavy Metal Detection System was designed and built by Ames Laboratory and the Center for Nondestructive Evaluation at Iowa State University. The system uses a C-frame inspection head with an X-ray tube mounted on one side of the frame and an imaging unit and a high purity germanium detector on the other side. the inspection head is portable and can be easily positioned around ventilation ducts and pipes up to 36 inches in diameter. Wide angle and narrow beam X-ray shots are used to identify the type of holdup material and the amount of the contaminant. Precisemore » assay data can be obtained within minutes of the interrogation. A profile of the containerized holdup material and a permanent record of the measurement are immediately available.« less

Social time preferences for health and money elicited with a choice experiment.

PubMed

Meerding, Willem Jan; Bonsel, Gouke J; Brouwer, Werner B F; Stuifbergen, Marja C; Essink-Bot, Marie-Louise

2010-01-01

In economic evaluations future health and monetary outcomes are commonly discounted at equal and constant rates. The theoretical foundation of this practice is being debated and appropriate discount rates for costs and health effects are sought. Here, we have derived social discount rates for health, money, and environmental benefits by means of a choice experiment. All choices were framed from a social perspective. We investigated differences in time preference by domain (health, monetary benefits, environmental benefits), time delay (5, 10, and 40 years), and respondent characteristics. Respondents were 173 health-care professionals and 34 health policymakers. Choice titration was used to determine when the respondent was indifferent between future and present benefits. At least two-thirds of respondents preferred an intervention with immediate benefits to delayed benefits in the different domains. The median (mean) yearly discount rates for health benefits were 2.7% (10.7%), 1.3% (3.5%), and 1.1% (2.3%) assuming a 5, 10, and 40 years delay, respectively. Social time preference for monetary benefits was significantly stronger, with median (mean) yearly discount rates of 6.6% (18.7%) and 4.8% (11.2%) assuming a 5 and 10 years delay, respectively. The social time preference with regard to environmental benefits was similar to the monetary benefits. Social time preference for the different domains was significantly correlated at the individual level. The empirically derived social time preference is in line with current theoretical arguments for a lower discount rate for health benefits than for monetary benefits. Moreover, the implied median discount rates for health were lower than those commonly used or advocated in guidelines.

Understanding asexual identity as a means to facilitate culturally competent care: A systematic literature review.

PubMed

Jones, Catriona; Hayter, Mark; Jomeen, Julie

2017-12-01

To provide a contemporary overview of asexuality and the implications this has for healthcare practice. Individuals belonging to sexual minority groups face many barriers in accessing appropriate health care. The term "sexual minority group" is usually used to refer to lesbian women, gay, bisexual and transgender individuals. Anecdotal and research evidence suggests that those who identify as asexual have similar poor experiences. Systematic review and qualitative analysis. This work uses a systematic review and qualitative analysis of the existing interview data from self-identified asexuals, to construct features of the asexual identity. The findings will help practitioners and health professionals develop an understanding of this poorly understood construct. Ultimately this work is aimed at facilitating culturally competent care in the context of asexuality. Qualitative analysis produced three themes, which can be used, not only to frame asexuality in a positive and normalising way, but also to provide greater understanding of asexuality, "romantic differences coupled with sexual indifference," "validation through engagement with asexual communities" and "a diversity of subasexual identities." Having some understanding of what it means to identify as asexual, and respecting the choices made by asexuals can markedly improve the experiences of those who embrace an asexual identity when engaging with health care. Anecdotal evidence, taken from one of the largest asexual online forums, suggests that a number of self-identified asexuals choose not to disclose their identity to healthcare professionals through fear of their asexual status being pathologised, problematised or judged. Given that asexuality is a poorly understood concept, this may be due to lack of understanding on behalf of healthcare providers. The review provides health professionals and practitioners working in clinical settings with some insights of the features of an asexual identity to facilitate culturally competent care. © 2017 John Wiley & Sons Ltd.

Study on the frame body structure of micro-electric vehicle based on frontal crash safety

NASA Astrophysics Data System (ADS)

Lu, Yaoquan; Zhang, Sanchuan

2017-08-01

In order to research the safety of skeleton type body of micro-electric vehicles in the frontal collision, the method of finite element modeling and simulation are used to analyze frame body that is fitted with the energy absorption structure, the simulation results show that On the basis of absorbing the most energy and the least of body acceleration, the absorbent structure parameters can be optimized, the optimized parameters are length 180 mm, wall thickness 3 mm and materials Q460.

Aircraft Materials, Processes, Cleaning and Corrosion Control (Course Outline), Aviation Mechanics 1 (Power and Frame): 9073.01.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

This document presents an outline for a 135-hour course designed to familiarize the beginning student with the basic concepts common to aircraft materials and processes, together with the requirements of proper cleaning and corrosion control as outlined by the Federal Aviation Agency. The aviation airframe and powerplant maintenance technician is…

Making Sense and Nonsense: Comparing Mediated Discourse and Agential Realist Approaches to Materiality in a Preschool Makerspace

ERIC Educational Resources Information Center

Wohlwend, Karen E.; Peppler, Kylie A.; Keune, Anna; Thompson, Naomi

2017-01-01

Two approaches to materiality (i.e. mediated discourse and agential realism) are compared to explore their usefulness in tracking literacies in action and artefacts produced during a play and design activity in a preschool makerspace. Mediated discourse analysis has relied on linguistic framing and social semiotics to make sense of multimodality.…

Intellectual property analysis of holographic materials business

NASA Astrophysics Data System (ADS)

Reingand, Nadya; Hunt, David

2006-02-01

The paper presents an overview of intellectual property in the field of holographic photosensitive materials and highlights the possibilities offered by patent searching and analysis. Thousands of patent documents relevant to holographic materials have been uncovered by the study. The search was performed in the following databases: U.S. Patent Office, European Patent Office, and Japanese Patent Office for the time frame of 1971 through November 2005. The patent analysis has unveiled trends in patent temporal distribution, leading IP portfolios, companies competition within the holographic materials market and other interesting insights.

Cost benefit study of advanced materials technology for aircraft turbine engines

NASA Technical Reports Server (NTRS)

Hillery, R. V.; Johnston, R. P.

1977-01-01

The cost/benefits of eight advanced materials technologies were evaluated for two aircraft missions. The overall study was based on a time frame of commercial engine use of the advanced material technologies by 1985. The material technologies evaluated were eutectic turbine blades, titanium aluminide components, ceramic vanes, shrouds and combustor liners, tungsten composite FeCrAly blades, gamma prime oxide dispersion strengthened (ODS) alloy blades, and no coat ODS alloy combustor liners. They were evaluated in two conventional takeoff and landing missions, one transcontinental and one intercontinental.

Deformability of shredded tires

DOT National Transportation Integrated Search

1999-01-01

This report describes three separate studies that examine the deformability of shredded tire fill material. The first study determined the response of shredded tires to cyclic loading. These tests were conducted in a load frame on both constrained an...

Comet Ejecta in Aerogel

NASA Image and Video Library

2006-02-21

This image from NASA shows a particle impact on the aluminum frame that holds the aerogel tiles. The debris from the impact shot into the adjacent aerogel tile producing the explosion pattern of ejecta framents captured in the material.

USSR Report World Economy and International Relations No. 10, October 1983.

DTIC Science & Technology

1984-01-12

offsets the negative consequences of such a situation. However, the socialist world is not at all indifferent to these developments in world economy...world—both with its allies and with the developing nations—was seen exclusively from the standpoint of a " global character of the Soviet threat...by the Group of 77 earlier (concerning the convening of global negotiations, the role of cooperation between developing countries in the

The Bayesian Approach to Statistics.

DTIC Science & Technology

1980-05-01

to attempt such a development successfully was Ramsey (1964)-- the original publication was 1931. The first detailed discussion was by Savage (1954...for A is a/(a + b) . Any increase (decrease) in a will make the urn gamble more (less) attractive. Notice that this interpretation can be tested , to see...if the scientist is so indifferent. We do not suggest it is necessarily the best test . Ways of testing , using coherence, have been considered by

Reliability, Availability and Maintainability Design Practices Guide. Volume 1,

DTIC Science & Technology

1981-03-01

Experience 7-3-3 Air Force RIV - Avionics 7-3-4 RIW-S Army 7-3-5a The Application of Availability to Linear 7-3-6 Indifference Contracting Improvement...acceptance of the maintain- ability of Air Force ground electronic systems and equipments. Although the notebook is directed at ground electronic systems...conformal coating standardization, a lack of written instructions, and no standardization between fleet activities. The Naval Air Development Center

Coastal and Submesoscale Process Studies for ASIRI

DTIC Science & Technology

2017-01-30

of upper ocean processes and air- sea interaction in the Bay of Bengal. This, in the long run , would contribute toward improving the intra-seasonal...and air- sea interaction in the Bay of Bengal. This, in the long run, would contribute toward improving the intra-seasonal Monsoonal forecast in...different times of year, and to understand its relationship with air- sea fluxes of heat and moisture in the Bay of Bengal. 2. To determine what

Method for plating with metal oxides

DOEpatents

Silver, Gary L.; Martin, Frank S.

1994-08-23

A method of plating hydrous metal oxides on at least one substrate, which method is indifferent to the electrochemical properties of the substrate, and comprises reacting metallic ions in aqueous solution with an appropriate oxidizing agent such as sodium hypochlorite or calcium sulfite with oxygen under suitable conditions of pH and concentration such that oxidation and precipitation of metal oxide are sufficiently slow to allow satisfactory plating of metal oxide on the substrate.

The Combined Action Platoon and its Applicability in Future Conflict

DTIC Science & Technology

2005-12-05

were not infantrymen by trade), small unit tactics, first aid, map and compass reading, war- dog use, procedures for requesting and controlling...words of Che Guevera, “The insurgent can thrive on even and indifferent peasantry – his defeat can come only if the people regurgitate him.”24 The...insurgent violence may cause exactly this reaction as innocent civilians continue to be targeted. Once the insurgents are “ regurgitated ,” like the

All-optical framing photography based on hyperspectral imaging method

NASA Astrophysics Data System (ADS)

Liu, Shouxian; Li, Yu; Li, Zeren; Chen, Guanghua; Peng, Qixian; Lei, Jiangbo; Liu, Jun; Yuan, Shuyun

2017-02-01

We propose and experimentally demonstrate a new all optical-framing photography that uses hyperspectral imaging methods to record a chirped pulse's temporal-spatial information. This proposed method consists of three parts: (1) a chirped laser pulse encodes temporal phenomena onto wavelengths; (2) a lenslet array generates a series of integral pupil images;(3) a dispersive device disperses the integral images at void space of image sensor. Compared with Ultrafast All-Optical Framing Technology(Daniel Frayer,2013,2014) and Sequentially Time All-Optical Mapping Photography( Nakagawa 2014, 2015), our method is convenient to adjust the temporal resolution and to flexibly increase the numbers of frames. Theoretically, the temporal resolution of our scheme is limited by the amount of dispersion that is added to a Fourier transform limited femtosecond laser pulse. Correspondingly, the optimal number of frames is decided by the ratio of the observational time window to the temporal resolution, and the effective pixels of each frame are mostly limited by the dimensions M×N of the lenslet array. For example, if a 40fs Fourier transform limited femtosecond pulse is stretched to 10ps, a CCD camera with 2048×3072 pixels can record 15 framing images with temporal resolution of 650fs and image size of 100×100 pixels. As spectrometer structure, our recording part has another advantage that not only amplitude images but also frequency domain interferograms can be imaged. Therefore, it is comparatively easy to capture fast dynamics in the refractive index change of materials. A further dynamic experiment is being conducted.

Analysis for the Progressive Failure Response of Textile Composite Fuselage Frames

NASA Technical Reports Server (NTRS)

Johnson, Eric R.; Boitnott, Richard L. (Technical Monitor)

2002-01-01

A part of aviation accident mitigation is a crashworthy airframe structure, and an important measure of merit for a crashworthy structure is the amount of kinetic energy that can be absorbed in the crush of the structure. Prediction of the energy absorbed from finite element analyses requires modeling the progressive failure sequence. Progressive failure modes may include material degradation, fracture and crack growth, and buckling and collapse. The design of crashworthy airframe components will benefit from progressive failure analyses that have been validated by tests. The subject of this research is the development of a progressive failure analysis for a textile composite, circumferential fuselage frame subjected to a quasi-static, crash-type load. The test data for the frame are reported, and these data are used to develop and to validate methods for the progressive failure response.

An Evaluation of Frangible Materials as Veneers on Vented Structural Member Designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jameson, Kevin Jay

2015-10-01

Literature shows there has been extensive research and testing done in the area of wall panels and frangible materials. There is evidence from past research that shows it is possible to vent a structure that has had an accidental internal explosion [1]. The reviewed literature shows that most designs vent the entire wall panel versus a frangible material attached to the wall panel. The frangible material attachment points are important to determine the overall loading of the wall panel structure [2]. The materials used in the reviewed literature were securely attached as well as strong enough to remain intact duringmore » the pressure loading to move the entire wall panel. Since the vented wall panel was the weakest part of the overall structure, the other walls of the structure were substantially larger. The structure was usually built from concrete and large amounts of steel with dirt and sand over the top of the structure.The study will be conducted at Sandia National Laboratories located in Albuquerque New Mexico. The skeletal structural design for evaluation is a rectangular frame with a square grid pattern constructed from steel. The skeletal structure has been given to the researcher as a design requirement. The grid pattern will be evaluated strictly on plastic deformation and the loading that is applied from the frangible material. The frangible material tested will either fit into the grid or will be a veneer lightly attached to the structure frame. The frangible material may be required on both sides of the structure to adequately represent the application.« less

Materials and structural aspects of advanced gas-turbine helicopter engines

NASA Technical Reports Server (NTRS)

Freche, J. C.; Acurio, J.

1979-01-01

Advances in materials, coatings, turbine cooling technology, structural and design concepts, and component-life prediction of helicopter gas-turbine-engine components are presented. Stationary parts including the inlet particle separator, the front frame, rotor tip seals, vanes and combustors and rotating components - compressor blades, disks, and turbine blades - are discussed. Advanced composite materials are considered for the front frame and compressor blades, prealloyed powder superalloys will increase strength and reduce costs of disks, the oxide dispersion strengthened alloys will have 100C higher use temperature in combustors and vanes than conventional superalloys, ceramics will provide the highest use temperature of 1400C for stator vanes and 1370C for turbine blades, and directionally solidified eutectics will afford up to 50C temperature advantage at turbine blade operating conditions. Coatings for surface protection at higher surface temperatures and design trends in turbine cooling technology are discussed. New analytical methods of life prediction such as strain gage partitioning for high temperature prediction, fatigue life, computerized prediction of oxidation resistance, and advanced techniques for estimating coating life are described.

A rotational and axial motion system load frame insert for in situ high energy x-ray studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shade, Paul A., E-mail: paul.shade.1@us.af.mil; Schuren, Jay C.; Turner, Todd J.

2015-09-15

High energy x-ray characterization methods hold great potential for gaining insight into the behavior of materials and providing comparison datasets for the validation and development of mesoscale modeling tools. A suite of techniques have been developed by the x-ray community for characterizing the 3D structure and micromechanical state of polycrystalline materials; however, combining these techniques with in situ mechanical testing under well characterized and controlled boundary conditions has been challenging due to experimental design requirements, which demand new high-precision hardware as well as access to high-energy x-ray beamlines. We describe the design and performance of a load frame insert withmore » a rotational and axial motion system that has been developed to meet these requirements. An example dataset from a deforming titanium alloy demonstrates the new capability.« less

Innovative Video Diagnostic Equipment for Material Science

NASA Technical Reports Server (NTRS)

Capuano, G.; Titomanlio, D.; Soellner, W.; Seidel, A.

2012-01-01

Materials science experiments under microgravity increasingly rely on advanced optical systems to determine the physical properties of the samples under investigation. This includes video systems with high spatial and temporal resolution. The acquisition, handling, storage and transmission to ground of the resulting video data are very challenging. Since the available downlink data rate is limited, the capability to compress the video data significantly without compromising the data quality is essential. We report on the development of a Digital Video System (DVS) for EML (Electro Magnetic Levitator) which provides real-time video acquisition, high compression using advanced Wavelet algorithms, storage and transmission of a continuous flow of video with different characteristics in terms of image dimensions and frame rates. The DVS is able to operate with the latest generation of high-performance cameras acquiring high resolution video images up to 4Mpixels@60 fps or high frame rate video images up to about 1000 fps@512x512pixels.

Method of moving frames to solve time-dependent Maxwell's equations on anisotropic curved surfaces: Applications to invisible cloak and ELF propagation

NASA Astrophysics Data System (ADS)

Chun, Sehun

2017-07-01

Applying the method of moving frames to Maxwell's equations yields two important advancements for scientific computing. The first is the use of upwind flux for anisotropic materials in Maxwell's equations, especially in the context of discontinuous Galerkin (DG) methods. Upwind flux has been available only to isotropic material, because of the difficulty of satisfying the Rankine-Hugoniot conditions in anisotropic media. The second is to solve numerically Maxwell's equations on curved surfaces without the metric tensor and composite meshes. For numerical validation, spectral convergences are displayed for both two-dimensional anisotropic media and isotropic spheres. In the first application, invisible two-dimensional metamaterial cloaks are simulated with a relatively coarse mesh by both the lossless Drude model and the piecewisely-parametered layered model. In the second application, extremely low frequency propagation on various surfaces such as spheres, irregular surfaces, and non-convex surfaces is demonstrated.

Cuing consumerism: situational materialism undermines personal and social well-being.

PubMed

Bauer, Monika A; Wilkie, James E B; Kim, Jung K; Bodenhausen, Galen V

2012-05-01

Correlational evidence indicates that materialistic individuals experience relatively low levels of well-being. Across four experiments, we found that situational cuing can also trigger materialistic mind-sets, with similarly negative personal and social consequences. Merely viewing desirable consumer goods resulted in increases in materialistic concerns and led to heightened negative affect and reduced social involvement (Experiment 1). Framing a computer task as a "Consumer Reaction Study" led to a stronger automatic bias toward values reflecting self-enhancement, compared with framing the same task as a "Citizen Reaction Study" (Experiment 2). Consumer cues also increased competitiveness (Experiment 3) and selfishness in a water-conservation dilemma (Experiment 4). Thus, the costs of materialism are not localized only in particularly materialistic people, but can also be found in individuals who happen to be exposed to environmental cues that activate consumerism-cues that are commonplace in contemporary society.

Pseudogenization of a Sweet-Receptor Gene Accounts for Cats' Indifference toward Sugar

PubMed Central

Li, Xia; Li, Weihua; Wang, Hong; Cao, Jie; Maehashi, Kenji; Huang, Liquan; Bachmanov, Alexander A; Reed, Danielle R; Legrand-Defretin, Véronique; Beauchamp, Gary K; Brand, Joseph G

2005-01-01

Although domestic cats (Felis silvestris catus) possess an otherwise functional sense of taste, they, unlike most mammals, do not prefer and may be unable to detect the sweetness of sugars. One possible explanation for this behavior is that cats lack the sensory system to taste sugars and therefore are indifferent to them. Drawing on work in mice, demonstrating that alleles of sweet-receptor genes predict low sugar intake, we examined the possibility that genes involved in the initial transduction of sweet perception might account for the indifference to sweet-tasting foods by cats. We characterized the sweet-receptor genes of domestic cats as well as those of other members of the Felidae family of obligate carnivores, tiger and cheetah. Because the mammalian sweet-taste receptor is formed by the dimerization of two proteins (T1R2 and T1R3; gene symbols Tas1r2 and Tas1r3), we identified and sequenced both genes in the cat by screening a feline genomic BAC library and by performing PCR with degenerate primers on cat genomic DNA. Gene expression was assessed by RT-PCR of taste tissue, in situ hybridization, and immunohistochemistry. The cat Tas1r3 gene shows high sequence similarity with functional Tas1r3 genes of other species. Message from Tas1r3 was detected by RT-PCR of taste tissue. In situ hybridization and immunohistochemical studies demonstrate that Tas1r3 is expressed, as expected, in taste buds. However, the cat Tas1r2 gene shows a 247-base pair microdeletion in exon 3 and stop codons in exons 4 and 6. There was no evidence of detectable mRNA from cat Tas1r2 by RT-PCR or in situ hybridization, and no evidence of protein expression by immunohistochemistry. Tas1r2 in tiger and cheetah and in six healthy adult domestic cats all show the similar deletion and stop codons. We conclude that cat Tas1r3 is an apparently functional and expressed receptor but that cat Tas1r2 is an unexpressed pseudogene. A functional sweet-taste receptor heteromer cannot form, and thus the cat lacks the receptor likely necessary for detection of sweet stimuli. This molecular change was very likely an important event in the evolution of the cat's carnivorous behavior. PMID:16103917

Solar central receiver heliostat reflector assembly

DOEpatents

Horton, Richard H.; Zdeb, John J.

1980-01-01

A heliostat reflector assembly for a solar central receiver system comprises a light-weight, readily assemblable frame which supports a sheet of stretchable reflective material and includes mechanism for selectively applying tension to and positioning the sheet to stretch it to optical flatness. The frame is mounted on and supported by a pipe pedestal assembly that, in turn, is installed in the ground. The frame is controllably driven in a predetermined way by a light-weight drive system so as to be angularly adjustable in both elevation and azimuth to track the sun and efficiently continuously reflect the sun's rays to a focal zone, i.e. central receiver, which forms part of a solar energy utilization system, such as a solar energy fueled electrical power generation system. The frame may include a built-in system for testing for optical flatness of the reflector. The preferable geometric configuration of the reflector is octagonal; however, it may be other shapes, such as hexagonal, pentagonal or square. Several different embodiments of means for tensioning and positioning the reflector to achieve optical flatness are disclosed. The reflector assembly is based on the stretch frame concept which provides an extremely light-weight, simple, low-cost reflector assembly that may be driven for positioning and tracking by a light-weight, inexpensive drive system.

Understanding the Role of Message Frames on African-American Willingness to Participate in a Hypothetical Diabetes Prevention Study.

PubMed

Langford, Aisha T; Larkin, Knoll; Resnicow, Ken; Zikmund-Fisher, Brian J; Fagerlin, Angela

2017-08-01

The objective of this research was to evaluate the impact of message framing (e.g., highlighting health disparities vs. progress toward reducing disparities) on willingness to enroll in a hypothetical research study. African-American (AA, n = 1513) and White (n = 362) adults completed an online survey about diabetes, health behaviors including physical activity, and attitudes about research. AA participants were randomized to view a general message (same message as provided to all White participants) or 1 of 4 alternate messages that framed the need for people to participate in research in terms of race and/or health disparities. Among AAs, there were no differences in willingness to enroll in the study by message frame. However, individual characteristics including younger age, female sex, attitudes about research, a sense of obligation, and community responsibility were significant predictors of willingness to enroll in the study. AA participants who received the general message were equally willing as White participants to enroll in the study. Highlighting race and health disparities in study recruitment materials may not be needed to increase interest among AAs. Factors beyond race appear to be stronger motivators for participation. Unlike previous research, racial framing did not suppress motivation to enroll in our hypothetical study.

Design for Additive Bio-Manufacturing: From Patient-Specific Medical Devices to Rationally Designed Meta-Biomaterials.

PubMed

Zadpoor, Amir A

2017-07-25

Recent advances in additive manufacturing (AM) techniques in terms of accuracy, reliability, the range of processable materials, and commercial availability have made them promising candidates for production of functional parts including those used in the biomedical industry. The complexity-for-free feature offered by AM means that very complex designs become feasible to manufacture, while batch-size-indifference enables fabrication of fully patient-specific medical devices. Design for AM (DfAM) approaches aim to fully utilize those features for development of medical devices with substantially enhanced performance and biomaterials with unprecedented combinations of favorable properties that originate from complex geometrical designs at the micro-scale. This paper reviews the most important approaches in DfAM particularly those applicable to additive bio-manufacturing including image-based design pipelines, parametric and non-parametric designs, metamaterials, rational and computationally enabled design, topology optimization, and bio-inspired design. Areas with limited research have been identified and suggestions have been made for future research. The paper concludes with a brief discussion on the practical aspects of DfAM and the potential of combining AM with subtractive and formative manufacturing processes in so-called hybrid manufacturing processes.

Design for Additive Bio-Manufacturing: From Patient-Specific Medical Devices to Rationally Designed Meta-Biomaterials

PubMed Central

Zadpoor, Amir A.

2017-01-01

Recent advances in additive manufacturing (AM) techniques in terms of accuracy, reliability, the range of processable materials, and commercial availability have made them promising candidates for production of functional parts including those used in the biomedical industry. The complexity-for-free feature offered by AM means that very complex designs become feasible to manufacture, while batch-size-indifference enables fabrication of fully patient-specific medical devices. Design for AM (DfAM) approaches aim to fully utilize those features for development of medical devices with substantially enhanced performance and biomaterials with unprecedented combinations of favorable properties that originate from complex geometrical designs at the micro-scale. This paper reviews the most important approaches in DfAM particularly those applicable to additive bio-manufacturing including image-based design pipelines, parametric and non-parametric designs, metamaterials, rational and computationally enabled design, topology optimization, and bio-inspired design. Areas with limited research have been identified and suggestions have been made for future research. The paper concludes with a brief discussion on the practical aspects of DfAM and the potential of combining AM with subtractive and formative manufacturing processes in so-called hybrid manufacturing processes. PMID:28757572

Zeta potential of microfluidic substrates: 1. Theory, experimental techniques, and effects on separations.

PubMed

Kirby, Brian J; Hasselbrink, Ernest F

2004-01-01

This paper summarizes theory, experimental techniques, and the reported data pertaining to the zeta potential of silica and silicon with attention to use as microfluidic substrate materials, particularly for microchip chemical separations. Dependence on cation concentration, buffer and cation type, pH, cation valency, and temperature are discussed. The Debye-Hückel limit, which is often correctly treated as a good approximation for describing the ion concentration in the double layer, can lead to serious errors if it is extended to predict the dependence of zeta potential on the counterion concentration. For indifferent univalent electrolytes (e.g., sodium and potassium), two simple scalings for the dependence of zeta potential on counterion concentration can be derived in high- and low-zeta limits of the nonlinear Poisson-Boltzman equation solution in the double layer. It is shown that for most situations relevant to microchip separations, the high-zeta limit is most applicable, leading to the conclusion that the zeta potential on silica substrates is approximately proportional to the logarithm of the molar counterion concentration. The zeta vs. pH dependence measurements from several experiments are compared by normalizing the zeta based on concentration.

Influence of the Dukhin and Reynolds numbers on the apparent zeta potential of granular porous media.

PubMed

Crespy, A; Bolève, A; Revil, A

2007-01-01

The Helmholtz-Smoluchowski (HS) equation is widely used to determine the apparent zeta potential of porous materials using the streaming potential method. We present a model able to correct this apparent zeta potential of granular media of the influence of the Dukhin and Reynolds numbers. The Dukhin number represents the ratio between the surface conductivity (mainly occurring in the Stern layer) and the pore water conductivity. The Reynolds number represents the ratio between inertial and viscous forces in the Navier-Stokes equation. We show here that the HS equation can lead to serious errors if it is used to predict the dependence of zeta potential on flow in the inertial laminar flow regime without taking into account these corrections. For indifferent 1:1 electrolytes (such as sodium chloride), we derived two simple scaling laws for the dependence of the streaming potential coupling coefficient (or the apparent zeta potential) on the Dukhin and Reynolds numbers. Our model is compared with a new set of experimental data obtained on glass bead packs saturated with NaCl solutions at different salinities and pH. We find fairly good agreement between the model and these experimental data.

The population genetics of mutations: good, bad and indifferent

PubMed Central

Loewe, Laurence; Hill, William G.

2010-01-01

Population genetics is fundamental to our understanding of evolution, and mutations are essential raw materials for evolution. In this introduction to more detailed papers that follow, we aim to provide an oversight of the field. We review current knowledge on mutation rates and their harmful and beneficial effects on fitness and then consider theories that predict the fate of individual mutations or the consequences of mutation accumulation for quantitative traits. Many advances in the past built on models that treat the evolution of mutations at each DNA site independently, neglecting linkage of sites on chromosomes and interactions of effects between sites (epistasis). We review work that addresses these limitations, to predict how mutations interfere with each other. An understanding of the population genetics of mutations of individual loci and of traits affected by many loci helps in addressing many fundamental and applied questions: for example, how do organisms adapt to changing environments, how did sex evolve, which DNA sequences are medically important, why do we age, which genetic processes can generate new species or drive endangered species to extinction, and how should policy on levels of potentially harmful mutagens introduced into the environment by humans be determined? PMID:20308090

Reframing violence against women as a human rights violation: Evan Stark's Coercive Control.

PubMed

Libal, Kathryn; Parekh, Serena

2009-12-01

Evan Stark claims that partner-perpetrated physical abuse and other forms of violence against women ought to be understood as a human rights violation. The authors engage Stark's rhetorically powerful political and analytical innovation by outlining one theoretical and one practical challenge to shifting the paradigm that researchers, advocates, and policy makers use to describe, explain, and remedy the harms of coercive control from misdemeanor assault to human rights violation. The theoretical challenge involves overcoming the public/ private dichotomy that underpins liberal conceptions of human rights.The practical challenge involves using the human rights framework in the United States, given public indifference to human rights rhetoric or law, reluctance of U.S. policy makers to submit to scrutiny or justice-oriented processes under international law on issues of human rights and especially war crimes, and the consequent U.S. legacy of refusal to participate meaningfully in the international human rights process. The authors conclude that employing a human rights framework holds potential in the United States, but the paradigm shift Stark advocates will not materialize without widespread mobilization of interest in and understanding of human rights among domestic violence advocates and the society in general.

Stress analysis and buckling of J-stiffened graphite-epoxy panel

NASA Technical Reports Server (NTRS)

Davis, R. C.

1980-01-01

A graphite epoxy shear panel with bonded on J stiffeners was investigated. The panel, loaded to buckling in a picture frame shear test is described. Two finite element models, each of which included the doubler material bonded to the panel skin under the stiffeners and at the panel edges, were used to make a stress analysis of the panel. The shear load distributions in the panel from two commonly used boundary conditions, applied shear load and applied displacement, were compared with the results from one of the finite element models that included the picture frame test fixture.

Commander Mattingly prepares meal on middeck

NASA Image and Video Library

1982-07-04

STS004-28-312 (27 June-4 July 1982) --- Astronaut Thomas K. Mattingly II, STS-4 crew commander, prepares a meal in the middeck area of space shuttle Columbia. He uses scissors to open a drink container. Various packages of food and meal accessories are attached to locker doors. At far left edge of the frame is the tall payload called continuous flow electrophoresis experiment (CFES) system-designed to separate biological materials according to their surface electrical charges as they pass through an electrical field. Astronaut Henry W. Hartsfield Jr. exposed this frame with a 35mm camera. Photo credit: NASA

Non-Destructive Evaluation of Aircraft Structural Components and Composite Materials at DSTO Using Sonic Thermography

DTIC Science & Technology

2011-02-01

for a 256 x 256 array to 2 kHz 2 UNCLASSIFIED UNCLASSIFIED DSTO–TN–0986 for a central 64 x 64 sub-array. The second camera, a FLIR SC6000, has an...The first group of inserts (1, 3, 5, 7 and 9) were located at a depth of 15% of the total thickness and the second group (2, 4, 6, 8 and 10) were...thermography was conducted with a nominal input power of 480 W over 1 second duration. The thermal data was acquired at a frame rate of 50 Hz over 750 frames

EPOXI Trip to Meet Comet Hartley 2

NASA Image and Video Library

2010-10-26

This frame from a movie begins with the launch of NASA Deep Impact on Jan. 12, 2005, from Cape Canaveral, Fla. On July 4, 2005, the mission released a probe into Comet Tempel 1, revealing its pristine, inner material.

Development of an electric, battery powered, skid-steer loader

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alcock, R.; Froehlich, D.P.; Christianson, L.L.

1985-01-01

A battery powered, skid-steer loader was developed for farm chore routines and materials handling activities. Outlined are details on drive train, hydraulics, loader, frame, cab, controls, battery and controller. Preliminary performance characteristics of the hydraulics are presented.

16 CFR 1633.9 - Glossary of terms.

Code of Federal Regulations, 2010 CFR

2010-01-01

... FLAMMABILITY (OPEN FLAME) OF MATTRESS SETS The Standard § 1633.9 Glossary of terms. (a) Absorbent pad. Pad used... may include constructed frames, foam, box springs or other materials used alone or in combination. (q..., solid foam core segments. ...

16 CFR 1633.9 - Glossary of terms.

Code of Federal Regulations, 2011 CFR

2011-01-01

... FLAMMABILITY (OPEN FLAME) OF MATTRESS SETS The Standard § 1633.9 Glossary of terms. (a) Absorbent pad. Pad used... may include constructed frames, foam, box springs or other materials used alone or in combination. (q..., solid foam core segments. ...

16 CFR § 1633.9 - Glossary of terms.

Code of Federal Regulations, 2013 CFR

2013-01-01

... FOR THE FLAMMABILITY (OPEN FLAME) OF MATTRESS SETS The Standard § 1633.9 Glossary of terms. (a... structure may include constructed frames, foam, box springs or other materials used alone or in combination..., solid foam core segments. ...

16 CFR 1633.9 - Glossary of terms.

Code of Federal Regulations, 2014 CFR

2014-01-01

... FLAMMABILITY (OPEN FLAME) OF MATTRESS SETS The Standard § 1633.9 Glossary of terms. (a) Absorbent pad. Pad used... may include constructed frames, foam, box springs or other materials used alone or in combination. (q..., solid foam core segments. ...

PRECAST CONCRETE WALL PANELS ARE LIFTED INTO PLACE ON MTR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

PRECAST CONCRETE WALL PANELS ARE LIFTED INTO PLACE ON MTR STEEL FRAME STRUCTURE. INL NEGATIVE NO. 1330. Unknown Photographer, 1/1951 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

United States Air Force Quality of Air Force Life Active Duty Air Force Personnel Survey: 1980 Quick Look Report

DTIC Science & Technology

1980-07-01

number) Quality of life Job satisfaction ABSTRACT (Continue on reverse tide If nece.’snry and Identify by block number) eport summarizes results of...following description! WORKS Doing work that is personally meaningful and important; pride in ay work) job satisfaction ) recognition for my efforts and...family (if married ) or from home end friends (if unmarried ). EXTREMELY UNDESIRABLE INDIFFERENT EXTREMELY DESIRABLE 68. A favorable attitude on the

Method for plating with metal oxides

DOEpatents

Silver, G.L.; Martin, F.S.

1994-08-23

A method is disclosed of plating hydrous metal oxides on at least one substrate, which method is indifferent to the electrochemical properties of the substrate, and comprises reacting metallic ions in aqueous solution with an appropriate oxidizing agent such as sodium hypochlorite or calcium sulfite with oxygen under suitable conditions of pH and concentration such that oxidation and precipitation of metal oxide are sufficiently slow to allow satisfactory plating of metal oxide on the substrate. 1 fig.

Interactions between Candida albicans and Candida glabrata in biofilms: Influence of the strain type, culture medium and glucose supplementation.

PubMed

Hosida, Thayse Yumi; Cavazana, Thamires Priscila; Henriques, Mariana; Pessan, Juliano Pelim; Delbem, Alberto Carlos Botazzo; Monteiro, Douglas Roberto

2018-04-01

The relationship among Candida species may be influenced by several factors. Thus, this study evaluated the interactions between Candida albicans and Candida glabrata in biofilms, varying the strain type, culture medium and glucose supplementation. Biofilms were formed for 48 hours in Sabouraud dextrose broth (SDB) or RPMI 1640, supplemented with 0%, 1% or 5% glucose. Each strain of C. albicans was combined with two strains of C. glabrata, generating four biofilm associations, which were quantified by colony-forming units (CFUs), total biomass and metabolic activity. Data were analysed by ANOVA and Tukey's HSD test (α = 0.05). For CFUs, all associations were classified as indifferent for biofilms formed in RPMI 1640, while for SDB the interactions were antagonistic for C. albicans and indifferent for C. glabrata. The association of reference strains resulted in a dual-species biofilm with biomass significantly higher than that observed for each single biofilm developed in SDB. The metabolic activity of dual-species biofilms did not significantly differ from that found for single ones, except for co-culture of the reference strains. Glucose supplementation and culture media had a significant influence on all parameters. In conclusion, the strain type, culture medium and glucose supplementation influenced the interactions between C. albicans and C. glabrata. © 2017 Blackwell Verlag GmbH.

Investigating the role of the ventromedial prefrontal cortex in the assessment of brands.

PubMed

Santos, José Paulo; Seixas, Daniela; Brandão, Sofia; Moutinho, Luiz

2011-01-01

The ventromedial prefrontal cortex (vmPFC) is believed to be important in everyday preference judgments, processing emotions during decision-making. However, there is still controversy in the literature regarding the participation of the vmPFC. To further elucidate the contribution of the vmPFC in brand preference, we designed a functional magnetic resonance imaging (fMRI) study where 18 subjects assessed positive, indifferent, and fictitious brands. Also, both the period during and after the decision process were analyzed, hoping to unravel temporally the role of the vmPFC, using modeled and model-free fMRI analysis. Considering together the period before and after decision-making, there was activation of the vmPFC when comparing positive with indifferent or fictitious brands. However, when the decision-making period was separated from the moment after the response, and especially for positive brands, the vmPFC was more active after the choice than during the decision process itself, challenging some of the existing literature. The results of the present study support the notion that the vmPFC may be unimportant in the decision stage of brand preference, questioning theories that postulate that the vmPFC is in the origin of such a choice. Further studies are needed to investigate in detail why the vmPFC seems to be involved in brand preference only after the decision process.

Investigating the Role of the Ventromedial Prefrontal Cortex in the Assessment of Brands

PubMed Central

Santos, José Paulo; Seixas, Daniela; Brandão, Sofia; Moutinho, Luiz

2011-01-01

The ventromedial prefrontal cortex (vmPFC) is believed to be important in everyday preference judgments, processing emotions during decision-making. However, there is still controversy in the literature regarding the participation of the vmPFC. To further elucidate the contribution of the vmPFC in brand preference, we designed a functional magnetic resonance imaging (fMRI) study where 18 subjects assessed positive, indifferent, and fictitious brands. Also, both the period during and after the decision process were analyzed, hoping to unravel temporally the role of the vmPFC, using modeled and model-free fMRI analysis. Considering together the period before and after decision-making, there was activation of the vmPFC when comparing positive with indifferent or fictitious brands. However, when the decision-making period was separated from the moment after the response, and especially for positive brands, the vmPFC was more active after the choice than during the decision process itself, challenging some of the existing literature. The results of the present study support the notion that the vmPFC may be unimportant in the decision stage of brand preference, questioning theories that postulate that the vmPFC is in the origin of such a choice. Further studies are needed to investigate in detail why the vmPFC seems to be involved in brand preference only after the decision process. PMID:21687799

Hormone therapy for inmates: a metonym for transgender rights.

PubMed

Maruri, Silpa

2011-01-01

The issue of hormone therapy for transgender inmates, while seemingly limited in importance, is one that involves issues of greater importance for the transgender community. The greatest issue at the heart of the matter is the legal argument that is traditionally used to gain access to hormone therapy: the Eighth Amendment. The Eighth Amendment prohibits deliberate indifference to the medical needs of inmates. Traditionally, transgender inmates have gained access to hormone therapy by appealing to the DSM-IV's classification of Gender Identity Disorder (GID) as a mental illness, and by establishing that prison officials' failure to provide hormone therapy constitutes deliberate indifference to a serious medical need. However, appeal to GID is a double-edged sword: while it allows access to hormone therapy, it does so by describing transgender individuals as somehow sick or infirm. This description is at odds with the transgender community's conceptualization of itself. This Note seeks to square the legal arguments for provision of hormone therapy to transgender inmates with the philosophical backdrop that shapes the transgender rights movement by using Plyler v. Doe as a model. This Note argues that access to hormone therapy by transgender inmates involves the intersection of a quasi-fundamental right with a quasi-suspect class. By utilizing such an argument, the transgender community is not bound by the negative expressive effect that the law may have in describing it as infirm or deficient.

An innovative and multi-functional smart vibration platform

NASA Astrophysics Data System (ADS)

Olmi, C.; Song, G.; Mo, Y. L.

2007-08-01

Recently, there has been increasing efforts to incorporate vibration damping or energy dissipation mechanisms into civil structures, particularly by using smart materials technologies. Although papers about structural vibration control using smart materials have been published for more than two decades, there has been little research in developing teaching equipment to introduce smart materials to students via in-classroom demonstration or hands-on experiments. In this paper, an innovative and multi-functional smart vibration platform (SVP) has been developed by the Smart Materials and Structures Laboratory at the University of Houston to demonstrate vibration control techniques using multiple smart materials for educational and research purposes. The vibration is generated by a motor with a mass imbalance mounted on top of the frame. Shape memory alloys (SMA) and magneto-rheological (MR) fluid are used to increase the stiffness and damping ratio, respectively, while a piezoceramic sensor (lead zirconate titanate, or PZT) is used as a vibration sensing device. An electrical circuit has been designed to control the platform in computer-control or manual mode through the use of knobs. The former mode allows for an automated demonstration, while the latter requires the user to manually adjust the stiffness and damping ratio of the frame. In addition, the system accepts network connections and can be used in a remote experiment via the internet. This platform has great potential to become an effective tool for teaching vibration control and smart materials technologies to students in civil, mechanical and electrical engineering for both education and research purposes.

In-Plane Behaviour of a Reinforcement Concrete Frame with a Dry Stack Masonry Panel

PubMed Central

Lin, Kun; Totoev, Yuri Zarevich; Liu, Hongjun; Guo, Tianyou

2016-01-01

In order to improve the energy dissipation of the masonry infilled frame structure while decreasing the stiffening and strengthening effects of the infill panels, a new dry stacked panel (DSP) semi-interlocking masonry (SIM) infill panel has been developed. In this paper, the material properties of DSP and a traditional unreinforced masonry (URM) panel have been evaluated experimentally. A series of cyclic tests were performed to investigate the cyclic behaviour of the reinforcement concrete (RC) frame with different infill panels. The failure modes, damage evolution, hysteretic behaviour, stiffness degradation and energy dissipation were compared and analysed. We concluded that DSP is capable of significantly improving the seismic energy dissipation due to its hysteretic behaviour when the frame is in elastic stage without increasing the stiffness of the frame. Therefore, DSP or SIM panels can be considered as frictional dampers. Based on the experimental results, the influence of DSP was examined. Using the parallel model, the hysteretic loops of DSP subjected to different load cases were achieved. The typical full hysteretic loop for DSP could be divided into three distinct stages of behaviour: packing stage, constant friction stage and equivalent strut stage. The connection between the panel and the frame had a great effect on the transferring of different mechanical stages. The constant friction stage was verified to provide substantial energy dissipation and benefits to the ductility of the structure, which, therefore, is suggested to be prolonged in reality. PMID:28787906

Assessment of the possible contribution of space ties on-board GNSS satellites to the terrestrial reference frame

NASA Astrophysics Data System (ADS)

Bruni, Sara; Rebischung, Paul; Zerbini, Susanna; Altamimi, Zuheir; Errico, Maddalena; Santi, Efisio

2018-04-01

The realization of the international terrestrial reference frame (ITRF) is currently based on the data provided by four space geodetic techniques. The accuracy of the different technique-dependent materializations of the frame physical parameters (origin and scale) varies according to the nature of the relevant observables and to the impact of technique-specific errors. A reliable computation of the ITRF requires combining the different inputs, so that the strengths of each technique can compensate for the weaknesses of the others. This combination, however, can only be performed providing some additional information which allows tying together the independent technique networks. At present, the links used for that purpose are topometric surveys (local/terrestrial ties) available at ITRF sites hosting instruments of different techniques. In principle, a possible alternative could be offered by spacecrafts accommodating the positioning payloads of multiple geodetic techniques realizing their co-location in orbit (space ties). In this paper, the GNSS-SLR space ties on-board GPS and GLONASS satellites are thoroughly examined in the framework of global reference frame computations. The investigation focuses on the quality of the realized physical frame parameters. According to the achieved results, the space ties on-board GNSS satellites cannot, at present, substitute terrestrial ties in the computation of the ITRF. The study is completed by a series of synthetic simulations investigating the impact that substantial improvements in the volume and quality of SLR observations to GNSS satellites would have on the precision of the GNSS frame parameters.

In-Plane Behaviour of a Reinforcement Concrete Frame with a Dry Stack Masonry Panel.

PubMed

Lin, Kun; Totoev, Yuri Zarevich; Liu, Hongjun; Guo, Tianyou

2016-02-11

In order to improve the energy dissipation of the masonry infilled frame structure while decreasing the stiffening and strengthening effects of the infill panels, a new dry stacked panel (DSP) semi-interlocking masonry (SIM) infill panel has been developed. In this paper, the material properties of DSP and a traditional unreinforced masonry (URM) panel have been evaluated experimentally. A series of cyclic tests were performed to investigate the cyclic behaviour of the reinforcement concrete (RC) frame with different infill panels. The failure modes, damage evolution, hysteretic behaviour, stiffness degradation and energy dissipation were compared and analysed. We concluded that DSP is capable of significantly improving the seismic energy dissipation due to its hysteretic behaviour when the frame is in elastic stage without increasing the stiffness of the frame. Therefore, DSP or SIM panels can be considered as frictional dampers. Based on the experimental results, the influence of DSP was examined. Using the parallel model, the hysteretic loops of DSP subjected to different load cases were achieved. The typical full hysteretic loop for DSP could be divided into three distinct stages of behaviour: packing stage, constant friction stage and equivalent strut stage. The connection between the panel and the frame had a great effect on the transferring of different mechanical stages. The constant friction stage was verified to provide substantial energy dissipation and benefits to the ductility of the structure, which, therefore, is suggested to be prolonged in reality.