Guidelines for Producing Instructional and Other Printed Materials in Alternate Media for Persons with Disabilities.

ERIC Educational Resources Information Center

California Community Colleges, Sacramento. Office of the Chancellor.

Title II, Section 504 of the U.S. Department of Education's Office for Civil Rights (OCR) requires community colleges to provide access to print and computer-based information for students with visual impairments. In response, the Chancellor's Office of the California Community College system prepared a budget change proposal (BCP) for the…

SCCT guidelines for the performance and acquisition of coronary computed tomographic angiography: A report of the society of Cardiovascular Computed Tomography Guidelines Committee: Endorsed by the North American Society for Cardiovascular Imaging (NASCI).

PubMed

Abbara, Suhny; Blanke, Philipp; Maroules, Christopher D; Cheezum, Michael; Choi, Andrew D; Han, B Kelly; Marwan, Mohamed; Naoum, Chris; Norgaard, Bjarne L; Rubinshtein, Ronen; Schoenhagen, Paul; Villines, Todd; Leipsic, Jonathon

In response to recent technological advancements in acquisition techniques as well as a growing body of evidence regarding the optimal performance of coronary computed tomography angiography (coronary CTA), the Society of Cardiovascular Computed Tomography Guidelines Committee has produced this update to its previously established 2009 "Guidelines for the Performance of Coronary CTA" (1). The purpose of this document is to provide standards meant to ensure reliable practice methods and quality outcomes based on the best available data in order to improve the diagnostic care of patients. Society of Cardiovascular Computed Tomography Guidelines for the Interpretation is published separately (2). The Society of Cardiovascular Computed Tomography Guidelines Committee ensures compliance with all existing standards for the declaration of conflict of interest by all authors and reviewers for the purpose ofclarity and transparency. Copyright © 2016 Society of Cardiovascular Computed Tomography. All rights reserved.

Guidelines for composite materials research related to general aviation aircraft

NASA Technical Reports Server (NTRS)

Dow, N. F.; Humphreys, E. A.; Rosen, B. W.

1983-01-01

Guidelines for research on composite materials directed toward the improvement of all aspects of their applicability for general aviation aircraft were developed from extensive studies of their performance, manufacturability, and cost effectiveness. Specific areas for research and for manufacturing development were identified and evaluated. Inputs developed from visits to manufacturers were used in part to guide these evaluations, particularly in the area of cost effectiveness. Throughout the emphasis was to direct the research toward the requirements of general aviation aircraft, for which relatively low load intensities are encountered, economy of production is a prime requirement, and yet performance still commands a premium. A number of implications regarding further directions for developments in composites to meet these requirements also emerged from the studies. Chief among these is the need for an integrated (computer program) aerodynamic/structures approach to aircraft design.

A high temperature fatigue life prediction computer code based on the total strain version of StrainRange Partitioning (SRP)

NASA Technical Reports Server (NTRS)

Mcgaw, Michael A.; Saltsman, James F.

1993-01-01

A recently developed high-temperature fatigue life prediction computer code is presented and an example of its usage given. The code discussed is based on the Total Strain version of Strainrange Partitioning (TS-SRP). Included in this code are procedures for characterizing the creep-fatigue durability behavior of an alloy according to TS-SRP guidelines and predicting cyclic life for complex cycle types for both isothermal and thermomechanical conditions. A reasonably extensive materials properties database is included with the code.

77 FR 17055 - Intra-Agency Appeal Process: Guidelines for Appeals of Material Supervisory Determinations and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-23

... Guidelines for Appeals of Material Supervisory Determinations (``guidelines'') describe the types of... FEDERAL DEPOSIT INSURANCE CORPORATION Intra-Agency Appeal Process: Guidelines for Appeals of Material Supervisory Determinations and Guidelines for Appeals of Deposit Insurance Assessment...

Analysis of the stress state in an Iosipescu sheartest specimen

NASA Technical Reports Server (NTRS)

Walrath, D. E.; Adams, D. F.

1983-01-01

The state of stress in an Iosipescu shear test specimen is analyzed, utilizing a finite element computer program. The influence of test fixture configuration on this stress state is included. Variations of the standard specimen configuration, including notch depth, notch angle, and notch root radius are modeled. The purpose is to establish guidelines for a specimen geometry which will accommodate highly orthotropic materials while minimizing stress distribution nonuniformities. Materials ranging from isotropic to highly orthotropic are considered. An optimum specimen configuration is suggested, along with changes in the test fixture.

Guidelines in preparing computer-generated plots for NASA technical reports with the LaRC graphics output system

NASA Technical Reports Server (NTRS)

Taylor, N. L.

1983-01-01

To response to a need for improved computer-generated plots that are acceptable to the Langley publication process, the LaRC Graphics Output System has been modified to encompass the publication requirements, and a guideline has been established. This guideline deals only with the publication requirements of computer-generated plots. This report explains the capability that authors of NASA technical reports can use to obtain publication--quality computer-generated plots or the Langley publication process. The rules applied in developing this guideline and examples illustrating the rules are included.

Holistic Approaches to Reading (The Printout).

ERIC Educational Resources Information Center

Balajthy, Ernest

1989-01-01

Presents eight guidelines to consider when using computers for language instruction, emphasizing computer use in a social and purposeful context. Suggests computer software which adheres to these guidelines. (MM)

Representation primitives, process models and patient data in computer-interpretable clinical practice guidelines: a literature review of guideline representation models.

PubMed

Wang, Dongwen; Peleg, Mor; Tu, Samson W; Boxwala, Aziz A; Greenes, Robert A; Patel, Vimla L; Shortliffe, Edward H

2002-12-18

Representation of clinical practice guidelines in a computer-interpretable format is a critical issue for guideline development, implementation, and evaluation. We studied 11 types of guideline representation models that can be used to encode guidelines in computer-interpretable formats. We have consistently found in all reviewed models that primitives for representation of actions and decisions are necessary components of a guideline representation model. Patient states and execution states are important concepts that closely relate to each other. Scheduling constraints on representation primitives can be modeled as sequences, concurrences, alternatives, and loops in a guideline's application process. Nesting of guidelines provides multiple views to a guideline with different granularities. Integration of guidelines with electronic medical records can be facilitated by the introduction of a formal model for patient data. Data collection, decision, patient state, and intervention constitute four basic types of primitives in a guideline's logic flow. Decisions clarify our understanding on a patient's clinical state, while interventions lead to the change from one patient state to another.

Silk-Its Mysteries, How It Is Made, and How It Is Used.

PubMed

Ebrahimi, Davoud; Tokareva, Olena; Rim, Nae Gyune; Wong, Joyce Y; Kaplan, David L; Buehler, Markus J

2015-10-12

This article reviews fundamental and applied aspects of silk-one of Nature's most intriguing materials in terms of its strength, toughness, and biological role-in its various forms, from protein molecules to webs and cocoons, in the context of mechanical and biological properties. A central question that will be explored is how the bridging of scales and the emergence of hierarchical structures are critical elements in achieving novel material properties, and how this knowledge can be explored in the design of synthetic materials. We review how the function of a material system at the macroscale can be derived from the interplay of fundamental molecular building blocks. Moreover, guidelines and approaches to current experimental and computational designs in the field of synthetic silklike materials are provided to assist the materials science community in engineering customized finetuned biomaterials for biomedical applications.

Rapid Development and Distribution of Mobile Media-Rich Clinical Practice Guidelines Nationwide in Colombia.

PubMed

Flórez-Arango, José F; Sriram Iyengar, M; Caicedo, Indira T; Escobar, German

2017-01-01

Development and electronic distribution of Clinical Practice Guidelines production is costly and challenging. This poster presents a rapid method to represent existing guidelines in auditable, computer executable multimedia format. We used a technology that enables a small number of clinicians to, in a short period of time, develop a substantial amount of computer executable guidelines without programming.

Level II scour analysis for Bridge 23 (WODSTH00180023) on Town Highway 18, crossing North Bridgewater Brook, Woodstock, Vermont

USGS Publications Warehouse

Olson, Scott A.; Weber, Matthew A.

1996-01-01

Scour depths and rock rip-rap sizes were computed using the general guidelines described in Hydraulic Engineering Circular 18 (Richardson and others, 1993). Scour depths were calculated assuming an infinite depth of erosive material and a homogeneous particle-size distribution. The scour analysis results are presented in tables 1 and 2 and a graph of the scour depths is presented in figure 8.

Air Vehicles Division Computational Structural Analysis Facilities Policy and Guidelines for Users

DTIC Science & Technology

2005-05-01

34 Thermal " as appropriate and the tolerance set to "default". b) Create the model geometry. c) Create the finite elements. d) Create the...linear, non-linear, dynamic, thermal , acoustic analysis. The modelling of composite materials, creep, fatigue and plasticity are also covered...perform professional, high quality finite element analysis (FEA). FE analysts from many tasks within AVD are using the facilities to conduct FEA with

Level II scour analysis for Bridge 22 (CRAFTH00180022) on Town Highway 18, crossing Black River, Craftsbury, Vermont

USGS Publications Warehouse

Ayotte, Joseph D.

1996-01-01

Scour depths and rock rip-rap sizes were computed using the general guidelines described in Hydraulic Engineering Circular 18 (Richardson and others, 1993). Scour depths were calculated assuming an infinite depth of erosive material and a homogeneous particle-size distribution. The scour analysis results are presented in tables 1 and 2 and a graph of the scour depths is presented in figure 8.

Level II scour analysis for Bridge 31 (ALBATH00380031) on Town Highway 38, crossing the Black River, Albany, Vermont

USGS Publications Warehouse

Boehmler, Erick M.

1996-01-01

Scour depths and rock rip-rap sizes were computed using the general guidelines described in Hydraulic Engineering Circular 18 (Richardson and others, 1993). Scour depths were calculated assuming an infinite depth of erosive material and a homogeneous particle-size distribution. The scour analysis results are presented in tables 1 and 2 and a graph of the scour depths is presented in figure 8.

Level II scour analysis for Bridge 25 (ALBATH00250030) on Town Highway 25, crossing the Black River, Albany, Vermont

USGS Publications Warehouse

Boehmler, Erick M.

1996-01-01

Scour depths and rock rip-rap sizes were computed using the general guidelines described in Hydraulic Engineering Circular 18 (Richardson and others, 1993). Scour depths were calculated assuming an infinite depth of erosive material and a homogeneous particle-size distribution. The scour analysis results are presented in tables 1 and 2 and a graph of the scour depths is presented in figure 8.

Level II scour analysis for Bridge 6 (IRASTH00050006) on Town Highway 5, crossing the Black River, Irasburg, Vermont

USGS Publications Warehouse

Olson, Scott A.

1996-01-01

Scour depths and rock rip-rap sizes were computed using the general guidelines described in Hydraulic Engineering Circular 18 (Richardson and others, 1993). Scour depths were calculated assuming an infinite depth of erosive material and a homogeneous particle-size distribution. The scour analysis results are presented in tables 1 and 2 and a graph of the scour depths is presented in figure 8.

Level II scour analysis for Bridge 2 (CRAFTH00590002) on Town Highway 59, crossing Black River, Craftsbury, Vermont

USGS Publications Warehouse

Ayotte, Joseph D.

1996-01-01

Scour depths and rock rip-rap sizes were computed using the general guidelines described in Hydraulic Engineering Circular 18 (Richardson and others, 1993). Scour depths were calculated assuming an infinite depth of erosive material and a homogeneous particle-size distribution. The scour analysis results are presented in tables 1 and 2 and a graph of the scour depths is presented in figure 8.

Level II scour analysis for Bridge 26 (CRAFTH00250026) on Town Highway 25, crossing Black River, Craftsbury, Vermont

USGS Publications Warehouse

Ayotte, Joseph D.

1996-01-01

Scour depths and rock rip-rap sizes were computed using the general guidelines described in Hydraulic Engineering Circular 18 (Richardson and others, 1993). Scour depths were calculated assuming an infinite depth of erosive material and a homogeneous particle-size distribution. The scour analysis results are presented in tables 1 and 2 and a graph of the scour depths is presented in figure 8.

Semantic Clinical Guideline Documents

PubMed Central

Eriksson, Henrik; Tu, Samson W.; Musen, Mark

2005-01-01

Decision-support systems based on clinical practice guidelines can support physicians and other health-care personnel in the process of following best practice consistently. A knowledge-based approach to represent guidelines makes it possible to encode computer-interpretable guidelines in a formal manner, perform consistency checks, and use the guidelines directly in decision-support systems. Decision-support authors and guideline users require guidelines in human-readable formats in addition to computer-interpretable ones (e.g., for guideline review and quality assurance). We propose a new document-oriented information architecture that combines knowledge-representation models with electronic and paper documents. The approach integrates decision-support modes with standard document formats to create a combined clinical-guideline model that supports on-line viewing, printing, and decision support. PMID:16779037

Principles for the wise use of computers by children.

PubMed

Straker, L; Pollock, C; Maslen, B

2009-11-01

Computer use by children at home and school is now common in many countries. Child computer exposure varies with the type of computer technology available and the child's age, gender and social group. This paper reviews the current exposure data and the evidence for positive and negative effects of computer use by children. Potential positive effects of computer use by children include enhanced cognitive development and school achievement, reduced barriers to social interaction, enhanced fine motor skills and visual processing and effective rehabilitation. Potential negative effects include threats to child safety, inappropriate content, exposure to violence, bullying, Internet 'addiction', displacement of moderate/vigorous physical activity, exposure to junk food advertising, sleep displacement, vision problems and musculoskeletal problems. The case for child specific evidence-based guidelines for wise use of computers is presented based on children using computers differently to adults, being physically, cognitively and socially different to adults, being in a state of change and development and the potential to impact on later adult risk. Progress towards child-specific guidelines is reported. Finally, a set of guideline principles is presented as the basis for more detailed guidelines on the physical, cognitive and social impact of computer use by children. The principles cover computer literacy, technology safety, child safety and privacy and appropriate social, cognitive and physical development. The majority of children in affluent communities now have substantial exposure to computers. This is likely to have significant effects on child physical, cognitive and social development. Ergonomics can provide and promote guidelines for wise use of computers by children and by doing so promote the positive effects and reduce the negative effects of computer-child, and subsequent computer-adult, interaction.

Effective teaching strategies and methods of delivery for patient education: a systematic review and practice guideline recommendations.

PubMed

Friedman, Audrey Jusko; Cosby, Roxanne; Boyko, Susan; Hatton-Bauer, Jane; Turnbull, Gale

2011-03-01

The objective of this study was to determine effective teaching strategies and methods of delivery for patient education (PE). A systematic review was conducted and reviews with or without meta-analyses, which examined teaching strategies and methods of delivery for PE, were included. Teaching strategies identified are traditional lectures, discussions, simulated games, computer technology, written material, audiovisual sources, verbal recall, demonstration, and role playing. Methods of delivery focused on how to deliver the teaching strategies. Teaching strategies that increased knowledge, decreased anxiety, and increased satisfaction included computer technology, audio and videotapes, written materials, and demonstrations. Various teaching strategies used in combination were similarly successful. Moreover, structured-, culturally appropriate- and patient-specific teachings were found to be better than ad hoc teaching or generalized teaching. Findings provide guidance for establishing provincial standards for the delivery of PE. Recommendations concerning the efficacy of the teaching strategies and delivery methods are provided.

Designing User-Computer Dialogues: Basic Principles and Guidelines.

ERIC Educational Resources Information Center

Harrell, Thomas H.

This discussion of the design of computerized psychological assessment or testing instruments stresses the importance of the well-designed computer-user interface. The principles underlying the three main functional elements of computer-user dialogue--data entry, data display, and sequential control--are discussed, and basic guidelines derived…

77 FR 64834 - Computational Fluid Dynamics Best Practice Guidelines for Dry Cask Applications

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-23

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0250] Computational Fluid Dynamics Best Practice... public comments on draft NUREG-2152, ``Computational Fluid Dynamics Best Practice Guidelines for Dry Cask... System (ADAMS): You may access publicly-available documents online in the NRC Library at http://www.nrc...

Library and Classroom Use of Copyrighted Videotapes and Computer Software.

ERIC Educational Resources Information Center

Reed, Mary Hutchings; Stanek, Debra

1986-01-01

This pullout guide addresses issues regarding library use of copyrighted videotapes and computer software. Guidelines for videotapes cover in-classroom use, in-library use in public library, loan, and duplication. Guidelines for computer software cover purchase conditions, avoiding license restrictions, loaning, archival copies, and in-library and…

Multilayer Insulation Material Guidelines

NASA Technical Reports Server (NTRS)

Finckenor, M. M.; Dooling, D.

1999-01-01

Multilayer Insulation Material Guidelines provides data on multilayer insulation materials used by previous spacecraft such as Spacelab and the Long-Duration Exposure Facility and outlines other concerns. The data presented in the document are presented for information only. They can be used as guidelines for multilayer insulation design for future spacecraft provided the thermal requirements of each new design and the environmental effects on these materials are taken into account.

Computerization of guidelines: towards a "guideline markup language".

PubMed

Dart, T; Xu, Y; Chatellier, G; Degoulet, P

2001-01-01

Medical decision making is one of the most difficult daily tasks for physicians. Guidelines have been designed to reduce variance between physicians in daily practice, to improve patient outcomes and to control costs. In fact, few physicians use guidelines in daily practice. A way to ease the use of guidelines is to implement computerised guidelines (computer reminders). We present in this paper a method of computerising guidelines. Our objectives were: 1) to propose a generic model that can be instantiated for any specific guidelines; 2) to use eXtensible Markup Language (XML) as a guideline representation language to instantiate the generic model for a specific guideline. Our model is an object representation of a clinical algorithm, it has been validated by running two different guidelines issued by a French official Agency. In spite of some limitations, we found that this model is expressive enough to represent complex guidelines devoted to diabetes and hypertension management. We conclude that XML can be used as a description format to structure guidelines and as an interface between paper-based guidelines and computer applications.

Development of user guidelines for ECAS display design, volume 1

NASA Technical Reports Server (NTRS)

Dodson, D. W.; Shields, N. L., Jr.

1978-01-01

Experiment computer application software (ECAS) display design and command usage guidelines were developed, which if followed by spacelab experiments, would standardize methods and techniques for data presentation and commanding via ECAS. These guidelines would provide some commonality among experiments which would enhance crew training and flight operations. The guidelines are applicable to all onboard experiment displays, whether allocated by ECAS or a dedicated experiment processor. A brief description of the spacelab data display system characteristics and of the services provided by the experiment computer operating system is included. Guidelines concerning data presentation and layout of alphanumeric and graphic information are presented along with guidelines concerning keyboard commanding and command feedback.

Peterson's Guide to Colleges for Careers in Computing.

ERIC Educational Resources Information Center

Peterson's Guides, Inc., Princeton, NJ.

This guide contains guidelines for evaluating a career in computing, for selecting a college. The guide profiles undergraduate programs at approximately 1,050 institutions of higher education in the United States. The directory is divided into five main sections. The first section offers guidelines for evaluating a career in computing. It includes…

Building Chronic Kidney Disease Clinical Practice Guidelines Using the openEHR Guideline Definition Language.

PubMed

Lin, Ching-Heng; Lo, Ying-Chih; Hung, Pei-Yuan; Liou, Der-Ming

2016-12-07

As a result of the disease's high prevalence, chronic kidney disease (CKD) has become a global public health problem. A clinical decision support system that integrates with computer-interpretable guidelines (CIGs) should improve clinical outcomes and help to ensure patient safety. The openEHR guideline definition language (GDL) is a formal language used to represent CIGs. This study explores the feasibility of using a GDL approach for CKD; it also attempts to identify any potential gaps between the ideal concept and reality. Using the Kidney Disease Improving Global Outcomes (KDIGO) anemia guideline as material, we designed a development workflow in order to establish a series of GDL guidelines. Focus group discussions were conducted in order to identify important issues related to GDL implementation. Ten GDL guidelines and 37 archetypes were established using the KDIGO guideline document. For the focus group discussions, 16 clinicians and 22 IT experts were recruited and their perceptions, opinions and attitudes towards the GDL approach were explored. Both groups provided positive feedback regarding the GDL approach, but raised various concerns about GDL implementation. Based on the findings of this study, we identified some potential gaps that might exist during implementation between the GDL concept and reality. Three directions remain to be investigated in the future. Two of them are related to the openEHR GDL approach. Firstly, there is a need for the editing tool to be made more sophisticated. Secondly, there needs to be integration of the present approach into non openEHR-based hospital information systems. The last direction focuses on the applicability of guidelines and involves developing a method to resolve any conflicts that occur with insurance payment regulations.

Guidelines for computer security in general practice.

PubMed

Schattner, Peter; Pleteshner, Catherine; Bhend, Heinz; Brouns, Johan

2007-01-01

As general practice becomes increasingly computerised, data security becomes increasingly important for both patient health and the efficient operation of the practice. To develop guidelines for computer security in general practice based on a literature review, an analysis of available information on current practice and a series of key stakeholder interviews. While the guideline was produced in the context of Australian general practice, we have developed a template that is also relevant for other countries. Current data on computer security measures was sought from Australian divisions of general practice. Semi-structured interviews were conducted with general practitioners (GPs), the medical software industry, senior managers within government responsible for health IT (information technology) initiatives, technical IT experts, divisions of general practice and a member of a health information consumer group. The respondents were asked to assess both the likelihood and the consequences of potential risks in computer security being breached. The study suggested that the most important computer security issues in general practice were: the need for a nominated IT security coordinator; having written IT policies, including a practice disaster recovery plan; controlling access to different levels of electronic data; doing and testing backups; protecting against viruses and other malicious codes; installing firewalls; undertaking routine maintenance of hardware and software; and securing electronic communication, for example via encryption. This information led to the production of computer security guidelines, including a one-page summary checklist, which were subsequently distributed to all GPs in Australia. This paper maps out a process for developing computer security guidelines for general practice. The specific content will vary in different countries according to their levels of adoption of IT, and cultural, technical and other health service factors. Making these guidelines relevant to local contexts should help maximise their uptake.

Use of declarative statements in creating and maintaining computer-interpretable knowledge bases for guideline-based care.

PubMed

Tu, Samson W; Hrabak, Karen M; Campbell, James R; Glasgow, Julie; Nyman, Mark A; McClure, Robert; McClay, James; Abarbanel, Robert; Mansfield, James G; Martins, Susana M; Goldstein, Mary K; Musen, Mark A

2006-01-01

Developing computer-interpretable clinical practice guidelines (CPGs) to provide decision support for guideline-based care is an extremely labor-intensive task. In the EON/ATHENA and SAGE projects, we formulated substantial portions of CPGs as computable statements that express declarative relationships between patient conditions and possible interventions. We developed query and expression languages that allow a decision-support system (DSS) to evaluate these statements in specific patient situations. A DSS can use these guideline statements in multiple ways, including: (1) as inputs for determining preferred alternatives in decision-making, and (2) as a way to provide targeted commentaries in the clinical information system. The use of these declarative statements significantly reduces the modeling expertise and effort required to create and maintain computer-interpretable knowledge bases for decision-support purpose. We discuss possible implications for sharing of such knowledge bases.

Predicting lattice thermal conductivity with help from ab initio methods

NASA Astrophysics Data System (ADS)

Broido, David

2015-03-01

The lattice thermal conductivity is a fundamental transport parameter that determines the utility a material for specific thermal management applications. Materials with low thermal conductivity find applicability in thermoelectric cooling and energy harvesting. High thermal conductivity materials are urgently needed to help address the ever-growing heat dissipation problem in microelectronic devices. Predictive computational approaches can provide critical guidance in the search and development of new materials for such applications. Ab initio methods for calculating lattice thermal conductivity have demonstrated predictive capability, but while they are becoming increasingly efficient, they are still computationally expensive particularly for complex crystals with large unit cells . In this talk, I will review our work on first principles phonon transport for which the intrinsic lattice thermal conductivity is limited only by phonon-phonon scattering arising from anharmonicity. I will examine use of the phase space for anharmonic phonon scattering and the Grüneisen parameters as measures of the thermal conductivities for a range of materials and compare these to the widely used guidelines stemming from the theory of Liebfried and Schölmann. This research was supported primarily by the NSF under Grant CBET-1402949, and by the S3TEC, an Energy Frontier Research Center funded by the US DOE, office of Basic Energy Sciences under Award No. DE-SC0001299.

Distributed Training for the Reserve Component: Course Conversion and Implementation Guidelines for Computer Conferencing

DTIC Science & Technology

1990-08-01

Computer Conferencing ’ DTIC •ELECTEM. b ~Novo JIML 0*- B August 1990 Field Element al Boise, Idaho Field Unit at Fort Knox, Kentucky Training Resecarch...Distributed Training for the Reserve Component: Course Conversion and implementation Guidelines for Computer (onferencing _________________ __________ 12...identify by block number) FIELD GROUP SUB-GROT;W Asynchironous computer conferencing ’rt i1inimg technology _____ 1Reserve Component jtr ibuted

Developing Computer Use in Education: Guidelines, Trends and Issues.

ERIC Educational Resources Information Center

Anderson, Jonathan; And Others

Designed to provide educational policy-makers and decision-makers with a basis for the development of guidelines for the development of education programs, this report presents an overview of trends and issues in computer education within the countries of the Asia and Pacific region. The impact of computers on society is described, as well as the…

The Identification, Implementation, and Evaluation of Critical User Interface Design Features of Computer-Assisted Instruction Programs in Mathematics for Students with Learning Disabilities

ERIC Educational Resources Information Center

Seo, You-Jin; Woo, Honguk

2010-01-01

Critical user interface design features of computer-assisted instruction programs in mathematics for students with learning disabilities and corresponding implementation guidelines were identified in this study. Based on the identified features and guidelines, a multimedia computer-assisted instruction program, "Math Explorer", which delivers…

Taking Ownership of the ITC's Guidelines for Computer-Based and Internet-Delivered Testing: A South African Application

ERIC Educational Resources Information Center

Foxcroft, Cheryl D.; Davies, Caroline

2006-01-01

The increased use of computer-based and Internet-delivered testing has raised a number of ethical and legal issues. The International Test Commission's (this issue) Guidelines for Computer-Based and Internet-Delivered Testing represent the most recent attempt to provide test users, publishers, and developers with guidance regarding the appropriate…

7 CFR 1484.52 - What are the guidelines for computing the value of non-cash contributions?

Code of Federal Regulations, 2012 CFR

2012-01-01

... non-cash contributions? 1484.52 Section 1484.52 Agriculture Regulations of the Department of... What are the guidelines for computing the value of non-cash contributions? (a) Computing the value of..., claim up to the equivalent of a step 10, GS-15 for professional personnel and up to the current...

Evaluating structure selection in the hydrothermal growth of FeS 2 pyrite and marcasite

DOE PAGES

Kitchaev, Daniil A.; Ceder, Gerbrand

2016-12-14

While the ab initio prediction of the properties of solids and their optimization towards new proposed materials is becoming established, little predictive theory exists as to which metastable materials can be made and how, impeding their experimental realization. Here we propose a quasi-thermodynamic framework for predicting the hydrothermal synthetic accessibility of metastable materials and apply this model to understanding the phase selection between the pyrite and marcasite polymorphs of FeS 2. We demonstrate that phase selection in this system can be explained by the surface stability of the two phases as a function of ambient pH within nano-size regimes relevantmore » to nucleation. This result suggests that a first-principles understanding of nano-size phase stability in realistic synthesis environments can serve to explain or predict the synthetic accessibility of structural polymorphs, providing a guideline to experimental synthesis via efficient computational materials design.« less

@neurIST - chronic disease management through integration of heterogeneous data and computer-interpretable guideline services.

PubMed

Dunlop, R; Arbona, A; Rajasekaran, H; Lo Iacono, L; Fingberg, J; Summers, P; Benkner, S; Engelbrecht, G; Chiarini, A; Friedrich, C M; Moore, B; Bijlenga, P; Iavindrasana, J; Hose, R D; Frangi, A F

2008-01-01

This paper presents an overview of computerised decision support for clinical practice. The concept of computer-interpretable guidelines is introduced in the context of the @neurIST project, which aims at supporting the research and treatment of asymptomatic unruptured cerebral aneurysms by bringing together heterogeneous data, computing and complex processing services. The architecture is generic enough to adapt it to the treatment of other diseases beyond cerebral aneurysms. The paper reviews the generic requirements of the @neurIST system and presents the innovative work in distributing executable clinical guidelines.

7 CFR 1484.52 - What are the guidelines for computing the value of non-cash contributions?

Code of Federal Regulations, 2011 CFR

2011-01-01

... non-cash contributions? 1484.52 Section 1484.52 Agriculture Regulations of the Department of... Reimbursements § 1484.52 What are the guidelines for computing the value of non-cash contributions? (a) Computing... unknown, claim up to the equivalent of a step 10, GS-15 for professional personnel and up to the current...

7 CFR 1484.52 - What are the guidelines for computing the value of non-cash contributions?

Code of Federal Regulations, 2010 CFR

2010-01-01

... non-cash contributions? 1484.52 Section 1484.52 Agriculture Regulations of the Department of... Reimbursements § 1484.52 What are the guidelines for computing the value of non-cash contributions? (a) Computing... unknown, claim up to the equivalent of a step 10, GS-15 for professional personnel and up to the current...

Development of the laboratory prototype "CavyPool" for assessing treatments and materials for swimming pools.

PubMed

Valeriani, F; Gianfranceschi, G; Vitali, M; Protano, C; Romano Spica, V

2017-01-01

Hygiene and surveillance in swimming pools are established by WHO Guidelines and national laws. Progress in water management and pool construction is revolutionizing the field, introducing new materials, systems, disinfection procedures or monitoring markers. Innovation advances challenge the upgrading of safety and quality in pools and the appropriate implementation of guidelines. In order to provide a device for laboratory test, a prototype was realized and applied to study and compare swimming pool materials and treatments. A pool scale-model was engineered and evaluated by computational fluid dynamics algorithms. An automated real time monitoring assured steady state. Critical control points along the water circuit were made accessible to allow the placing of different biocides or water sampling. Simulations were safely performed in a standard hood. Materials for pool surfaces and pipelines were evaluated for biofilm formation under different disinfection conditions. Adherent microorganisms were assayed by mfDNA analysis using real time PCR. The prototype reached the steady state within 5-25 hours under different conditions, showing chemical, physical and fluid-dynamic stability. A method was optimized for testing materials showing their different response to biofilm induction. Several innovative PVC samples displayed highest resistance to bacterial adhesion. A device and method was developed for testing swimming pool hygienic parameters in laboratory. It allowed to test materials for pools hygiene and maintenance, including biofilm formation. It can be applied to simulate contaminations under different water treatments or disinfection strategies. It may support technical decisions and help policymakers in acquiring evidences for comparing or validating innovative solutions.

Evaluation of computer-generated guidelines for companions of paediatric patients undergoing chemotherapy.

PubMed

Lopes, Vagner José; Shmeil, Marcos Augusto Hochuli

2017-04-27

To compare computer-generated guidelines with and without the use of a Clinical Decision Support System - Oncology Care and Healthcare for Chemotherapy Patients, for the caregivers of children undergoing chemotherapy. This is a descriptive, evaluative, and quantitative study conducted at a paediatrics hospital in Curitiba, Paraná, Brazil, from December 2015 to January 2016. The sample consisted of 58 participants divided into two groups: Group 1, without the aid of software, and Group 2, with the aid of the software. The data were analysed using the Mann-Whitney U test. The guidelines revealed a statistical significance (p<0.05), with a prevalence of a higher concordance average in Group 2 in comparison with Group 1. Computer-generated guidelines are a valuable qualitative support tool for nurses.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van de Velde, Joris, E-mail: joris.vandevelde@ugent.be; Department of Radiotherapy, Ghent University, Ghent; Audenaert, Emmanuel

Purpose: To develop contouring guidelines for the brachial plexus (BP) using anatomically validated cadaver datasets. Magnetic resonance imaging (MRI) and computed tomography (CT) were used to obtain detailed visualizations of the BP region, with the goal of achieving maximal inclusion of the actual BP in a small contoured volume while also accommodating for anatomic variations. Methods and Materials: CT and MRI were obtained for 8 cadavers positioned for intensity modulated radiation therapy. 3-dimensional reconstructions of soft tissue (from MRI) and bone (from CT) were combined to create 8 separate enhanced CT project files. Dissection of the corresponding cadavers anatomically validatedmore » the reconstructions created. Seven enhanced CT project files were then automatically fitted, separately in different regions, to obtain a single dataset of superimposed BP regions that incorporated anatomic variations. From this dataset, improved BP contouring guidelines were developed. These guidelines were then applied to the 7 original CT project files and also to 1 additional file, left out from the superimposing procedure. The percentage of BP inclusion was compared with the published guidelines. Results: The anatomic validation procedure showed a high level of conformity for the BP regions examined between the 3-dimensional reconstructions generated and the dissected counterparts. Accurate and detailed BP contouring guidelines were developed, which provided corresponding guidance for each level in a clinical dataset. An average margin of 4.7 mm around the anatomically validated BP contour is sufficient to accommodate for anatomic variations. Using the new guidelines, 100% inclusion of the BP was achieved, compared with a mean inclusion of 37.75% when published guidelines were applied. Conclusion: Improved guidelines for BP delineation were developed using combined MRI and CT imaging with validation by anatomic dissection.« less

Modeling a Nursing Guideline with Standard Terminology and Unified Modeling Language for a Nursing Decision Support System: A Case Study.

PubMed

Choi, Jeeyae; Jansen, Kay; Coenen, Amy

In recent years, Decision Support Systems (DSSs) have been developed and used to achieve "meaningful use". One approach to developing DSSs is to translate clinical guidelines into a computer-interpretable format. However, there is no specific guideline modeling approach to translate nursing guidelines to computer-interpretable guidelines. This results in limited use of DSSs in nursing. Unified modeling language (UML) is a software writing language known to accurately represent the end-users' perspective, due to its expressive characteristics. Furthermore, standard terminology enabled DSSs have been shown to smoothly integrate into existing health information systems. In order to facilitate development of nursing DSSs, the UML was used to represent a guideline for medication management for older adults encode with the International Classification for Nursing Practice (ICNP®). The UML was found to be a useful and sufficient tool to model a nursing guideline for a DSS.

Modeling a Nursing Guideline with Standard Terminology and Unified Modeling Language for a Nursing Decision Support System: A Case Study

PubMed Central

Choi, Jeeyae; Jansen, Kay; Coenen, Amy

2015-01-01

In recent years, Decision Support Systems (DSSs) have been developed and used to achieve “meaningful use”. One approach to developing DSSs is to translate clinical guidelines into a computer-interpretable format. However, there is no specific guideline modeling approach to translate nursing guidelines to computer-interpretable guidelines. This results in limited use of DSSs in nursing. Unified modeling language (UML) is a software writing language known to accurately represent the end-users’ perspective, due to its expressive characteristics. Furthermore, standard terminology enabled DSSs have been shown to smoothly integrate into existing health information systems. In order to facilitate development of nursing DSSs, the UML was used to represent a guideline for medication management for older adults encode with the International Classification for Nursing Practice (ICNP®). The UML was found to be a useful and sufficient tool to model a nursing guideline for a DSS. PMID:26958174

Guidelines for the Design of Computers and Information Processing Systems to Increase Their Access by Persons with Disabilities. Version 2.0.

ERIC Educational Resources Information Center

Vanderheiden, Gregg C.; Lee, Charles C.

Many low-cost and no-cost modifications to computers would greatly increase the number of disabled individuals who could use standard computers without requiring custom modifications, and would increase the ability to attach special input and output systems. The purpose of the Guidelines is to provide an awareness of these access problems and a…

Software OT&E Guidelines. Volume 1. Software Test Manager’s Handbook

DTIC Science & Technology

1981-02-01

on reverse side If neceeary and identify by block number) The Software OT&E Guidelines is a set of handbooks prepared by the Computer / Support Systems...is one of a set of handbooks prepared by the Computer /Support Systems Division of the Test and Evaluation Directorate, Air Force Test and Evaluation...15 E. Software Maintainability .. .. ........ ... 16 F. Standard Questionnaires. .. .. ....... .... 16 1. Operator- Computer Interface Evaluation

76 FR 28188 - Office of Procurement and Property Management; Guidelines for the Transfer of Excess Computers or...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-16

... general, to provide the public the option of submitting information or transacting business electronically... Office of Procurement and Property Management; Guidelines for the Transfer of Excess Computers or Other... Property Management, USDA. ACTION: Proposed rule. SUMMARY: The Office of Procurement and Property...

An Introduction to Archival Automation: A RAMP Study with Guidelines.

ERIC Educational Resources Information Center

Cook, Michael

Developed under a contract with the International Council on Archives, these guidelines are designed to emphasize the role of automation techniques in archives and records services, provide an indication of existing computer systems used in different archives services and of specific computer applications at various stages of archives…

SPAN security policies and guidelines

NASA Technical Reports Server (NTRS)

Sisson, Patricia L.; Green, James L.

1989-01-01

A guide is provided to system security with emphasis on requirements and guidelines that are necessary to maintain an acceptable level of security on the network. To have security for the network, each node on the network must be secure. Therefore, each system manager, must strictly adhere to the requirements and must consider implementing the guidelines discussed. There are areas of vulnerability within the operating system that may not be addressed. However, when a requirement or guideline is discussed, implementation techniques are included. Information related to computer and data security is discussed to provide information on implementation options. The information is presented as it relates to a VAX computer environment.

28 CFR 59.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... materials upon which information is recorded, and includes, but is not limited to, written or printed... Administration DEPARTMENT OF JUSTICE (CONTINUED) GUIDELINES ON METHODS OF OBTAINING DOCUMENTARY MATERIALS HELD BY...— (1) A suspect in the criminal offense to which the materials sought under these guidelines relate; or...

An XML-based system for the flexible classification and retrieval of clinical practice guidelines.

PubMed Central

Ganslandt, T.; Mueller, M. L.; Krieglstein, C. F.; Senninger, N.; Prokosch, H. U.

2002-01-01

Beneficial effects of clinical practice guidelines (CPGs) have not yet reached expectations due to limited routine adoption. Electronic distribution and reminder systems have the potential to overcome implementation barriers. Existing electronic CPG repositories like the National Guideline Clearinghouse (NGC) provide individual access but lack standardized computer-readable interfaces necessary for automated guideline retrieval. The aim of this paper was to facilitate automated context-based selection and presentation of CPGs. Using attributes from the NGC classification scheme, an XML-based metadata repository was successfully implemented, providing document storage, classification and retrieval functionality. Semi-automated extraction of attributes was implemented for the import of XML guideline documents using XPath. A hospital information system interface was exemplarily implemented for diagnosis-based guideline invocation. Limitations of the implemented system are discussed and possible future work is outlined. Integration of standardized computer-readable search interfaces into existing CPG repositories is proposed. PMID:12463831

Development of Design Standards and Guidelines for Electromagnetic Compatibility and Lightning Protection for Spacecraft Utilizing Composite Materials

NASA Technical Reports Server (NTRS)

1996-01-01

Preliminary design guidelines necessary to assure electromagnetic compatibility (EMC) of spacecraft using composite materials, are presented. A database of electrical properties of composite materials which may have an effect on EMC is established. The guidelines concentrate on the composites that are conductive but may require enhancement to be adequate for EMC purposes. These composites are represented by graphite reinforced polymers. Methods for determining adequate conductivity levels for various EMC purposes are defined, along with the methods of design which increase conductivity of composite materials and joints to adequate levels.

Design Guidelines for Digital Learning Material for Food Chemistry Education.

ERIC Educational Resources Information Center

Diederen, Julia; Gruppen, Harry; Voragen, Alphons G. J.; Hartog, Rob; Mulder, Martin; Biemans, Harm

This paper describes the first stage of a 4-year research project on the design, development and use of Web-based digital learning material for food chemistry education. The paper discusses design guidelines, based on principles that were selected from theories on learning and instruction, and illustrates in detail how these guidelines were used…

Distributed Training for the Reserve Component: Course Conversion and Implementation Guidelines for Computer Conferencing.

ERIC Educational Resources Information Center

Hahn, H. A.; And Others

The purpose of this handbook is to provide background and guidelines for course designers and instructional developers who will be developing Reserve Component training for the United States military using asynchronous computer conferencing techniques. The recommendations in this report are based on an international review of the literature in…

A Learning Research Informed Design and Evaluation of a Web-Enhanced Object Oriented Programming Seminar

ERIC Educational Resources Information Center

Georgantaki, Stavroula C.; Retalis, Symeon D.

2007-01-01

"Object-Oriented Programming" subject is included in the ACM Curriculum Guidelines for Undergraduate and Graduate Degree Programs in Computer Science as well as in Curriculum for K-12 Computer Science. In a few research studies learning problems and difficulties have been recorded, and therefore, specific pedagogical guidelines and…

Unit with Fluidized Bed for Gas-Vapor Activation of Different Carbonaceous Materials for Various Purposes: Design, Computation, Implementation.

PubMed

Strativnov, Eugene

2017-12-01

We propose the technology of obtaining the promising material with wide specter of application-activated nanostructured carbon. In terms of technical indicators, it will stand next to the materials produced by complex regulations with the use of costly chemical operations. It can be used for the following needs: as a sorbent for hemosorption and enterosorption, for creation of the newest source of electric current (lithium and zinc air batteries, supercapacitors), and for processes of short-cycle adsorption gas separation.In this study, the author gives recommendations concerning the design of the apparatus with fluidized bed and examples of calculation of specific devices. The whole given information can be used as guidelines for the design of energy effective aggregates. Calculation and design of the reactor were carried out using modern software complexes (ANSYS and SolidWorks).

Evidence-based guidelines for the informal use of computers by children to promote the development of academic, cognitive and social skills.

PubMed

Tran, Phuoc; Subrahmanyam, Kaveri

2013-01-01

The use of computers in the home has become very common among young children. This paper reviews research on the effects of informal computer use and identifies potential pathways through which computers may impact children's development. Based on the evidence reviewed, we present the following guidelines to arrange informal computer experiences that will promote the development of children's academic, cognitive and social skills: (1) children should be encouraged to use computers for moderate amounts of time (2-3 days a week for an hour or two per day) and (2) children's use of computers should (a) include non-violent action-based computer games as well as educational games, (b) not displace social activities but should instead be arranged to provide opportunities for social engagement with peers and family members and (c) involve content with pro-social and non-violent themes. We conclude the paper with questions that must be addressed in future research. This paper reviews research on the effects of informal computer use on children's academic, cognitive and social skills. Based on the evidence presented, we have presented guidelines to enable parents, teachers and other adults to arrange informal computer experiences so as to maximise their potential benefit for children's development.

Guidelines for Assessment and Abatement of Asbestos-Containing Materials in Buildings.

ERIC Educational Resources Information Center

Pielert, James H.; Mathey, Robert G.

This report presents guidelines, based on available information, for the assessment and abatement of asbestos-containing materials in buildings. Section 1 provides background information on the history and use of asbestos-containing products in buildings, the characteristics of asbestos fibers, products and materials containing asbestos, and…

A Guide to Educational Equity in Vocational Programs.

ERIC Educational Resources Information Center

Illinois State Office of Education, Springfield. Div. of Adult Vocational and Technical Education.

Designed for vocational teachers and administrators, this compilation of materials from various resources provides information, tips, and guidelines for evaluating instructional materials for sex bias and stereotypes, gives suggestions on using biased materials in a non-biased way, and presents guidelines for sex-equity in the classroom. Following…

A JAVA-based multimedia tool for clinical practice guidelines.

PubMed

Maojo, V; Herrero, C; Valenzuela, F; Crespo, J; Lazaro, P; Pazos, A

1997-01-01

We have developed a specific language for the representation of Clinical Practice Guidelines (CPGs) and Windows C++ and platform independent JAVA applications for multimedia presentation and edition of electronically stored CPGs. This approach facilitates translation of guidelines and protocols from paper to computer-based flowchart representations. Users can navigate through the algorithm with a friendly user interface and access related multimedia information within the context of each clinical problem. CPGs can be stored in a computer server and distributed over the World Wide Web, facilitating dissemination, local adaptation, and use as a reference element in medical care. We have chosen the Agency for Health Care and Policy Research's heart failure guideline to demonstrate the capabilities of our tool.

Language Guidelines for a Mathematics Task Centre.

ERIC Educational Resources Information Center

Padula, Janice; Nin, Lucy

1999-01-01

Describes some of the thinking associated with the improvement of tasks, suggesting some guidelines for others to consider in producing written mathematics materials for young students. Provides examples of written mathematics materials. (ASK)

Chamber dimensions and functional assessment with coronary computed tomographic angiography as compared to echocardiography using American Society of Echocardiography guidelines

PubMed Central

Rose, Michael; Rubal, Bernard; Hulten, Edward; Slim, Jennifer N; Steel, Kevin; Furgerson, James L; Villines, Todd C

2014-01-01

Background: The correlation between normal cardiac chamber linear dimensions measured during retrospective coronary computed tomographic angiography as compared to transthoracic echocardiography using the American Society of Echocardiography guidelines is not well established. Methods: We performed a review from January 2005 to July 2011 to identify subjects with retrospective electrocardiogram-gated coronary computed tomographic angiography scans for chest pain and transthoracic echocardiography with normal cardiac structures performed within 90 days. Dimensions were manually calculated in both imaging modalities in accordance with the American Society of Echocardiography published guidelines. Left ventricular ejection fraction was calculated on echocardiography manually using the Simpson’s formula and by coronary computed tomographic angiography using the end-systolic and end-diastolic volumes. Results: We reviewed 532 studies, rejected 412 and had 120 cases for review with a median time between studies of 7 days (interquartile range (IQR25,75) = 0–22 days) with no correlation between the measurements made by coronary computed tomographic angiography and transthoracic echocardiography using Bland–Altman analysis. We generated coronary computed tomographic angiography cardiac dimension reference ranges for both genders for our population. Conclusion: Our findings represent a step towards generating cardiac chamber dimensions’ reference ranges for coronary computed tomographic angiography as compared to transthoracic echocardiography in patients with normal cardiac morphology and function using the American Society of Echocardiography guideline measurements that are commonly used by cardiologists. PMID:26770706

Guidelines for Documentation of Computer Programs and Automated Data Systems. (Category: Software; Subcategory: Documentation).

ERIC Educational Resources Information Center

Federal Information Processing Standards Publication, 1976

1976-01-01

These guidelines provide a basis for determining the content and extent of documentation for computer programs and automated data systems. Content descriptions of ten document types plus examples of how management can determine when to use the various types are included. The documents described are (1) functional requirements documents, (2) data…

Suitability Assessment of Printed Dietary Guidelines for Pregnant Women and Parents of Infants and Toddlers From 7 European Countries.

PubMed

Garnweidner-Holme, Lisa Maria; Dolvik, Stina; Frisvold, Cathrine; Mosdøl, Annhild

2016-02-01

To evaluate selected European printed dietary guidelines for pregnant women and parents of infants and toddlers using the suitability assessment of materials (SAM) method. A descriptive study to determine the suitability of 14 printed dietary guidelines from 7 European countries based on deductive quantitative analyses. Materials varied greatly in format and content: 35.7% of materials were rated superior and 64.3% were rated adequate according to the overall SAM score for patient education material. None of the materials were scored not suitable. Among the categories, the highest average scores were for layout and typography and the lowest average scores were for cultural appropriateness and learning stimulation and motivation. Interrater reliability ranged from Cohen's kappa of 0.37 to 0.62 (mean, 0.41), indicating fair to moderate agreement among the 3 investigators. Overall, the suitability of the assessed printed dietary guidelines was adequate. Based on the SAM methodology, printed dietary guidelines may increase in suitability by emphasizing aspects related to health literacy and accommodating the needs of different food cultures within a population. Copyright © 2016 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Pelvic Normal Tissue Contouring Guidelines for Radiation Therapy: A Radiation Therapy Oncology Group Consensus Panel Atlas

PubMed Central

Gay, Hiram A.; Barthold, H. Joseph; O’Meara, Elizabeth; Bosch, Walter R.; El Naqa, Issam; Al-Lozi, Rawan; Rosenthal, Seth A.; Lawton, Colleen; Lee, W. Robert; Sandler, Howard; Zietman, Anthony; Myerson, Robert; Dawson, Laura A.; Willett, Christopher; Kachnic, Lisa A.; Jhingran, Anuja; Portelance, Lorraine; Ryu, Janice; Small, William; Gaffney, David; Viswanathan, Akila N.; Michalski, Jeff M.

2012-01-01

Purpose To define a male and female pelvic normal tissue contouring atlas for Radiation Therapy Oncology Group (RTOG) trials. Methods and Materials One male pelvis computed tomography (CT) data set and one female pelvis CT data set were shared via the Image-Guided Therapy QA Center. A total of 16 radiation oncologists participated. The following organs at risk were contoured in both CT sets: anus, anorectum, rectum (gastrointestinal and genitourinary definitions), bowel NOS (not otherwise specified), small bowel, large bowel, and proximal femurs. The following were contoured in the male set only: bladder, prostate, seminal vesicles, and penile bulb. The following were contoured in the female set only: uterus, cervix, and ovaries. A computer program used the binomial distribution to generate 95% group consensus contours. These contours and definitions were then reviewed by the group and modified. Results The panel achieved consensus definitions for pelvic normal tissue contouring in RTOG trials with these standardized names: Rectum, AnoRectum, SmallBowel, Colon, BowelBag, Bladder, UteroCervix, Adnexa_R, Adnexa_L, Prostate, SeminalVesc, PenileBulb, Femur_R, and Femur_L. Two additional normal structures whose purpose is to serve as targets in anal and rectal cancer were defined: AnoRectumSig and Mesorectum. Detailed target volume contouring guidelines and images are discussed. Conclusions Consensus guidelines for pelvic normal tissue contouring were reached and are available as a CT image atlas on the RTOG Web site. This will allow uniformity in defining normal tissues for clinical trials delivering pelvic radiation and will facilitate future normal tissue complication research. PMID:22483697

Distance Learning for Teacher Education. Report of a Technical Working Group Meeting (Islamabad, Pakistan, 4-16 November 1981). Volume II: Guidelines on Development of Materials.

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Bangkok (Thailand). Regional Office for Education in Asia and the Pacific.

This handbook, the second volume in a series of three publications on distance education, presents guidelines on structures and strategies in organizations and the processes of materials development. A checklist of specific items is included for each topic addressed. The first guidelines are addressed to policymakers and senior administrators and…

Laboratory assays evaluate the influence of physical guidelines on subterranean termite (Isoptera: Rhinotermitidae) tunneling, bait discovery, and consumption.

PubMed

Swoboda, L E; Miller, D M

2004-08-01

Laboratory assays were conducted to determine whether physical guidelines could direct subterranean termite foraging behavior. Several materials (wood, plastics, and wood thermoplastic composites) were evaluated for their potential to serve as termite guidelines. Termite tunneling along the different types of guidelines was measured. The proportion of baits discovered when connected by a guideline was compared with the proportion of unconnected baits discovered. Termite consumption of baits also was quantified. Assay results indicated that the termites did not respond to all guideline materials in the same way. Termites built significantly longer tunnels along wood guidelines than they did along any of the plastic guidelines tested. However, tunnel length along the wood and the wood thermoplastic composites was not significantly different. The probability of two baits being discovered when they were connected by wood guidelines was significantly greater than when the baits were connected by plastic guidelines or left unconnected (no guideline). Pairs of baits connected by wood thermoplastic composites were also significantly more likely to be discovered than unconnected baits. Bait consumption was not enhanced by the presence of the guidelines. It is likely that guidelines made of wood competed with the baits as a termite food resource.

Safety Standard for Oxygen and Oxygen Systems: Guidelines for Oxygen System Design, Materials Selection, Operations, Storage, and Transportation

NASA Technical Reports Server (NTRS)

1996-01-01

NASA's standard for oxygen system design, materials selection, operation, and transportation is presented. Minimum guidelines applicable to NASA Headquarters and all NASA Field Installations are contained.

Impact of graphene-based nanomaterials (GBNMs) on the structural and functional conformations of hepcidin peptide

NASA Astrophysics Data System (ADS)

Singh, Krishna P.; Baweja, Lokesh; Wolkenhauer, Olaf; Rahman, Qamar; Gupta, Shailendra K.

2018-03-01

Graphene-based nanomaterials (GBNMs) are widely used in various industrial and biomedical applications. GBNMs of different compositions, size and shapes are being introduced without thorough toxicity evaluation due to the unavailability of regulatory guidelines. Computational toxicity prediction methods are used by regulatory bodies to quickly assess health hazards caused by newer materials. Due to increasing demand of GBNMs in various size and functional groups in industrial and consumer based applications, rapid and reliable computational toxicity assessment methods are urgently needed. In the present work, we investigate the impact of graphene and graphene oxide nanomaterials on the structural conformations of small hepcidin peptide and compare the materials for their structural and conformational changes. Our molecular dynamics simulation studies revealed conformational changes in hepcidin due to its interaction with GBMNs, which results in a loss of its functional properties. Our results indicate that hepcidin peptide undergo severe structural deformations when superimposed on the graphene sheet in comparison to graphene oxide sheet. These observations suggest that graphene is more toxic than a graphene oxide nanosheet of similar area. Overall, this study indicates that computational methods based on structural deformation, using molecular dynamics (MD) simulations, can be used for the early evaluation of toxicity potential of novel nanomaterials.

Exploiting Temporal Constraints of Clinical Guidelines by Applying OpenEHR Archetypes.

PubMed

Cintho, Lilian Mie Mukai; Garcia, Diego; da Silva Santos, Bruno Henrique; Sacchi, Lucia; Quaglini, Silvana; Moro, Claudia Maria Cabral

2017-01-01

Studies describing Computer-Interpretable Clinical Guidelines (CIG) with temporal constrains (TC) generally have not addressed issues related to their integration into Electronic Health Record (EHR) systems. This study aimed to represent TCs contained in clinical guidelines by applying archetypes and Guideline Definition Language (GDL) to incorporate decision support into EHRs. An example of each TC class in the clinical guideline for management of Atrial Fibrillation was represented using archetypes and GDL.

Technology for Large-Scale Translation of Clinical Practice Guidelines: A Pilot Study of the Performance of a Hybrid Human and Computer-Assisted Approach.

PubMed

Van de Velde, Stijn; Macken, Lieve; Vanneste, Koen; Goossens, Martine; Vanschoenbeek, Jan; Aertgeerts, Bert; Vanopstal, Klaar; Vander Stichele, Robert; Buysschaert, Joost

2015-10-09

The construction of EBMPracticeNet, a national electronic point-of-care information platform in Belgium, began in 2011 to optimize quality of care by promoting evidence-based decision making. The project involved, among other tasks, the translation of 940 EBM Guidelines of Duodecim Medical Publications from English into Dutch and French. Considering the scale of the translation process, it was decided to make use of computer-aided translation performed by certificated translators with limited expertise in medical translation. Our consortium used a hybrid approach, involving a human translator supported by a translation memory (using SDL Trados Studio), terminology recognition (using SDL MultiTerm terminology databases) from medical terminology databases, and support from online machine translation. This resulted in a validated translation memory, which is now in use for the translation of new and updated guidelines. The objective of this experiment was to evaluate the performance of the hybrid human and computer-assisted approach in comparison with translation unsupported by translation memory and terminology recognition. A comparison was also made with the translation efficiency of an expert medical translator. We conducted a pilot study in which two sets of 30 new and 30 updated guidelines were randomized to one of three groups. Comparable guidelines were translated (1) by certificated junior translators without medical specialization using the hybrid method, (2) by an experienced medical translator without this support, and (3) by the same junior translators without the support of the validated translation memory. A medical proofreader who was blinded for the translation procedure, evaluated the translated guidelines for acceptability and adequacy. Translation speed was measured by recording translation and post-editing time. The human translation edit rate was calculated as a metric to evaluate the quality of the translation. A further evaluation was made of translation acceptability and adequacy. The average number of words per guideline was 1195 and the mean total translation time was 100.2 minutes/1000 words. No meaningful differences were found in the translation speed for new guidelines. The translation of updated guidelines was 59 minutes/1000 words faster (95% CI 2-115; P=.044) in the computer-aided group. Revisions due to terminology accounted for one third of the overall revisions by the medical proofreader. Use of the hybrid human and computer-aided translation by a non-expert translator makes the translation of updates of clinical practice guidelines faster and cheaper because of the benefits of translation memory. For the translation of new guidelines, there was no apparent benefit in comparison with the efficiency of translation unsupported by translation memory (whether by an expert or non-expert translator).

Technology for Large-Scale Translation of Clinical Practice Guidelines: A Pilot Study of the Performance of a Hybrid Human and Computer-Assisted Approach

PubMed Central

2015-01-01

Background The construction of EBMPracticeNet, a national electronic point-of-care information platform in Belgium, began in 2011 to optimize quality of care by promoting evidence-based decision making. The project involved, among other tasks, the translation of 940 EBM Guidelines of Duodecim Medical Publications from English into Dutch and French. Considering the scale of the translation process, it was decided to make use of computer-aided translation performed by certificated translators with limited expertise in medical translation. Our consortium used a hybrid approach, involving a human translator supported by a translation memory (using SDL Trados Studio), terminology recognition (using SDL MultiTerm terminology databases) from medical terminology databases, and support from online machine translation. This resulted in a validated translation memory, which is now in use for the translation of new and updated guidelines. Objective The objective of this experiment was to evaluate the performance of the hybrid human and computer-assisted approach in comparison with translation unsupported by translation memory and terminology recognition. A comparison was also made with the translation efficiency of an expert medical translator. Methods We conducted a pilot study in which two sets of 30 new and 30 updated guidelines were randomized to one of three groups. Comparable guidelines were translated (1) by certificated junior translators without medical specialization using the hybrid method, (2) by an experienced medical translator without this support, and (3) by the same junior translators without the support of the validated translation memory. A medical proofreader who was blinded for the translation procedure, evaluated the translated guidelines for acceptability and adequacy. Translation speed was measured by recording translation and post-editing time. The human translation edit rate was calculated as a metric to evaluate the quality of the translation. A further evaluation was made of translation acceptability and adequacy. Results The average number of words per guideline was 1195 and the mean total translation time was 100.2 minutes/1000 words. No meaningful differences were found in the translation speed for new guidelines. The translation of updated guidelines was 59 minutes/1000 words faster (95% CI 2-115; P=.044) in the computer-aided group. Revisions due to terminology accounted for one third of the overall revisions by the medical proofreader. Conclusions Use of the hybrid human and computer-aided translation by a non-expert translator makes the translation of updates of clinical practice guidelines faster and cheaper because of the benefits of translation memory. For the translation of new guidelines, there was no apparent benefit in comparison with the efficiency of translation unsupported by translation memory (whether by an expert or non-expert translator). PMID:26453372

Television viewing, computer use and total screen time in Canadian youth.

PubMed

Mark, Amy E; Boyce, William F; Janssen, Ian

2006-11-01

Research has linked excessive television viewing and computer use in children and adolescents to a variety of health and social problems. Current recommendations are that screen time in children and adolescents should be limited to no more than 2 h per day. To determine the percentage of Canadian youth meeting the screen time guideline recommendations. The representative study sample consisted of 6942 Canadian youth in grades 6 to 10 who participated in the 2001/2002 World Health Organization Health Behaviour in School-Aged Children survey. Only 41% of girls and 34% of boys in grades 6 to 10 watched 2 h or less of television per day. Once the time of leisure computer use was included and total daily screen time was examined, only 18% of girls and 14% of boys met the guidelines. The prevalence of those meeting the screen time guidelines was higher in girls than boys. Fewer than 20% of Canadian youth in grades 6 to 10 met the total screen time guidelines, suggesting that increased public health interventions are needed to reduce the number of leisure time hours that Canadian youth spend watching television and using the computer.

Expert Consensus Contouring Guidelines for Intensity Modulated Radiation Therapy in Esophageal and Gastroesophageal Junction Cancer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, Abraham J., E-mail: wua@mskcc.org; Bosch, Walter R.; Chang, Daniel T.

Purpose/Objective(s): Current guidelines for esophageal cancer contouring are derived from traditional 2-dimensional fields based on bony landmarks, and they do not provide sufficient anatomic detail to ensure consistent contouring for more conformal radiation therapy techniques such as intensity modulated radiation therapy (IMRT). Therefore, we convened an expert panel with the specific aim to derive contouring guidelines and generate an atlas for the clinical target volume (CTV) in esophageal or gastroesophageal junction (GEJ) cancer. Methods and Materials: Eight expert academically based gastrointestinal radiation oncologists participated. Three sample cases were chosen: a GEJ cancer, a distal esophageal cancer, and a mid-upper esophagealmore » cancer. Uniform computed tomographic (CT) simulation datasets and accompanying diagnostic positron emission tomographic/CT images were distributed to each expert, and the expert was instructed to generate gross tumor volume (GTV) and CTV contours for each case. All contours were aggregated and subjected to quantitative analysis to assess the degree of concordance between experts and to generate draft consensus contours. The panel then refined these contours to generate the contouring atlas. Results: The κ statistics indicated substantial agreement between panelists for each of the 3 test cases. A consensus CTV atlas was generated for the 3 test cases, each representing common anatomic presentations of esophageal cancer. The panel agreed on guidelines and principles to facilitate the generalizability of the atlas to individual cases. Conclusions: This expert panel successfully reached agreement on contouring guidelines for esophageal and GEJ IMRT and generated a reference CTV atlas. This atlas will serve as a reference for IMRT contours for clinical practice and prospective trial design. Subsequent patterns of failure analyses of clinical datasets using these guidelines may require modification in the future.« less

Environmental Suitability of Weathering Steel Structures in Florida - Material Selection, Phase 2.

DOT National Transportation Integrated Search

2017-08-01

For the purpose of establishing guidelines for selection of weathering steel material for bridges in Florida, data were collected to help establish appropriate guidelines. There were 30 monitoring stations set up for direct (weight loss) measurements...

GUIDELINES ON SELECTION AND USE OF SNOW AND ICE CONTROL MATERIALS.

DOT National Transportation Integrated Search

2017-09-19

This document presents guidelines for the selection of snow and ice control materials for winter weather roadway maintenance applications in Texas. The purpose of this document is to provide Texas Department of Transportation (TxDOT) roadway maintena...

Protocol for Atomic Oxygen Testing of Materials in Ground-Based Facilities. No. 2

NASA Technical Reports Server (NTRS)

Minton, Timothy K.

1995-01-01

A second version of standard guidelines is proposed for improving materials testing in ground-based atomic oxygen environments for the purpose of predicting the durability of the tested materials in low Earth orbit (LEO). Accompanying these guidelines are background information and notes about testing. Both the guidelines and the additional information are intended to aid users who wish to evaluate the potential hazard of atomic oxygen in LEO to a candidate space component without actually flying the component in space, and to provide a framework for more consistent atomic oxygen testing in the future.

Ergonomic guidelines for using notebook personal computers. Technical Committee on Human-Computer Interaction, International Ergonomics Association.

PubMed

Saito, S; Piccoli, B; Smith, M J; Sotoyama, M; Sweitzer, G; Villanueva, M B; Yoshitake, R

2000-10-01

In the 1980's, the visual display terminal (VDT) was introduced in workplaces of many countries. Soon thereafter, an upsurge in reported cases of related health problems, such as musculoskeletal disorders and eyestrain, was seen. Recently, the flat panel display or notebook personal computer (PC) became the most remarkable feature in modern workplaces with VDTs and even in homes. A proactive approach must be taken to avert foreseeable ergonomic and occupational health problems from the use of this new technology. Because of its distinct physical and optical characteristics, the ergonomic requirements for notebook PCs in terms of machine layout, workstation design, lighting conditions, among others, should be different from the CRT-based computers. The Japan Ergonomics Society (JES) technical committee came up with a set of guidelines for notebook PC use following exploratory discussions that dwelt on its ergonomic aspects. To keep in stride with this development, the Technical Committee on Human-Computer Interaction under the auspices of the International Ergonomics Association worked towards the international issuance of the guidelines. This paper unveils the result of this collaborative effort.

Integrating computation into the undergraduate curriculum: A vision and guidelines for future developments

NASA Astrophysics Data System (ADS)

Chonacky, Norman; Winch, David

2008-04-01

There is substantial evidence of a need to make computation an integral part of the undergraduate physics curriculum. This need is consistent with data from surveys in both the academy and the workplace, and has been reinforced by two years of exploratory efforts by a group of physics faculty for whom computation is a special interest. We have examined past and current efforts at reform and a variety of strategic, organizational, and institutional issues involved in any attempt to broadly transform existing practice. We propose a set of guidelines for development based on this past work and discuss our vision of computationally integrated physics.

GUIDELINES FOR STATE VOCATIONAL AGRICULTURE CURRICULUM MATERIALS SERVICES, A RESEARCH REPORT OF A GRADUATE STUDY. RESEARCH SERIES IN AGRICULTURAL EDUCATION.

ERIC Educational Resources Information Center

RIDENOUR, HARLAN E.; WOODIN, RALPH J.

PROBLEMS OF VOCATIONAL AGRICULTURE TEACHERS IN KEEPING ABREAST OF TECHNICAL KNOWLEDGE AND OBTAINING OR PREPARING MATERIALS STRUCTURED IN LOGICAL SEQUENCE FOR TEACHING PROMPTED A STUDY TO DEVELOP GUIDELINES FOR ORGANIZING AND OPERATING A STATEWIDE VOCATIONAL AGRICULTURE CURRICULUM MATERIALS SERVICE. A SURVEY OF 48 STATE DIRECTORS AND 48 STATE…

Facilitating adherence to the tobacco use treatment guideline with computer-mediated decision support systems: physician and clinic office manager perspectives.

PubMed

Marcy, Theodore W; Skelly, Joan; Shiffman, Richard N; Flynn, Brian S

2005-08-01

A majority of physicians do not adhere to all the elements of the evidence-based USPHS guideline on tobacco use and dependence treatment. Among physicians and clinic office managers in Vermont we assessed perceived barriers to guideline adherence. We then assessed attitudes towards a computer-mediated clinical decision support system (CDSS) to gauge whether this type of intervention could support performance of the guideline. A random sample of 600 Vermont primary care and subspecialty physicians were surveyed with a mailed survey instrument. A separate survey instrument was mailed to the census of 93 clinic office managers. The response rates of physicians and clinic office managers were 67% and 76%, respectively. Though most physicians were aware of the guideline and had positive attitudes towards it, there was a lack of familiarity with Vermont's smoking cessation resources as 35% would refer smokers to non-existent counseling resources and only 48% would refer patients to a toll-free quit line. Time constraints and the perception that smokers are unreceptive to counseling were the two most common barriers cited by both physicians and office managers. The vast majority of physicians (92%) have access to a computer in their outpatient clinics, and 68% have used computers during the course of a patient's visit. Four of the eight information management services that a CDSS could provide were highly valued by both physicians and clinic office managers. Interventions to improve adherence to the guideline should address the inaccurate perception that smokers are unreceptive to counseling, and physicians' lack of familiarity with resources. A CDSS may improve knowledge of these resources if the design addresses cost, space, and time limitations.

Guidelines for the selection of chemical-protective clothing. Volume 1. (3rd Edition). Report for January 1985-May 1987

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwope, A.D.; Costas, P.P.; Jackson, J.O.

1987-02-01

A variety of protective-clothing items are commerically available for emergency response and other applications where chemical hazards may be encountered. Data and information for selecting chemical-protective clothing is either not available or is inconsistant from source to source. In 1983, the U.S. Environmental Protection Agency sponsored the development of chemical-protective clothing selection guidelines to assist their own Office of Health and Safety in providing guidance to personnel, primarily EPA employees and contractors, working on hazardous-waste sites. These guidelines allowed a user to select an appropriate protective material for a specific chemical, select a clothing item (glove, suit, etc.) and thenmore » determine which manufacturers offered the clothing item in the selected material. The U.S. Coast Guard Office of Research and Development and the EPA have supplemented these guidelines with additional data on material chemical resistance, material physical properties, clothing design features, and specific-vendor products. A chapter has been added for selecting chemical protective suits. These guidelines contain data for over 750 chemicals and 700 clothing products. Volume I provides the performance information and recommendations for selecting different types of protective clothing.« less

75 FR 15485 - Pipeline Safety: Workshop on Guidelines for Integrity Assessment of Cased Pipe

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-29

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket ID...: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Notice of workshop. SUMMARY... ``Guidelines for Integrity Assessment of Cased Pipe in Gas Transmission Pipelines'' and related Frequently...

Guidelines for Preservation, Conservation, and Restoration of Local History and Local Genealogical Materials.

ERIC Educational Resources Information Center

RQ, 1993

1993-01-01

Presents guidelines adopted by the American Library Association (ALA) relating to the preservation, conservation, and restoration of local history and local genealogical materials. Topics addressed include assessing preservation needs; developing a plan; choosing appropriate techniques, including microduplication, photoduplication, electronic…

Designing Instructional Materials: Some Guidelines.

ERIC Educational Resources Information Center

Burbank, Lucille; Pett, Dennis

Guidelines for the design of instructional materials are outlined in this paper. The principles of design are presented in five major categories: (1) general design (structural appeal and personal appeal); (2) instructional design (attention, memory, concept learning, and attitude change); (3) visual design (media considerations, pictures, graphs…

Guidelines to Language Teaching in Classroom and Laboratory.

ERIC Educational Resources Information Center

Iodice, Don R.

Guidelines for evaluating, establishing, and administrating classroom and laboratory language programs are offered in this report. Attention is focused on the language laboratory, with sections on its use, scheduling, materials and texts, preparation of audio materials, preparation of tests, supervision, discipline, and maintenance. Briefer…

Stochastic Modeling of Radioactive Material Releases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrus, Jason; Pope, Chad

2015-09-01

Nonreactor nuclear facilities operated under the approval authority of the U.S. Department of Energy use unmitigated hazard evaluations to determine if potential radiological doses associated with design basis events challenge or exceed dose evaluation guidelines. Unmitigated design basis events that sufficiently challenge dose evaluation guidelines or exceed the guidelines for members of the public or workers, merit selection of safety structures, systems, or components or other controls to prevent or mitigate the hazard. Idaho State University, in collaboration with Idaho National Laboratory, has developed a portable and simple to use software application called SODA (Stochastic Objective Decision-Aide) that stochastically calculatesmore » the radiation dose associated with hypothetical radiological material release scenarios. Rather than producing a point estimate of the dose, SODA produces a dose distribution result to allow a deeper understanding of the dose potential. SODA allows users to select the distribution type and parameter values for all of the input variables used to perform the dose calculation. SODA then randomly samples each distribution input variable and calculates the overall resulting dose distribution. In cases where an input variable distribution is unknown, a traditional single point value can be used. SODA was developed using the MATLAB coding framework. The software application has a graphical user input. SODA can be installed on both Windows and Mac computers and does not require MATLAB to function. SODA provides improved risk understanding leading to better informed decision making associated with establishing nuclear facility material-at-risk limits and safety structure, system, or component selection. It is important to note that SODA does not replace or compete with codes such as MACCS or RSAC, rather it is viewed as an easy to use supplemental tool to help improve risk understanding and support better informed decisions. The work was funded through a grant from the DOE Nuclear Safety Research and Development Program.« less

48 CFR 552.216-72 - Placement of Orders.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Acquisition Service (FAS) will place all orders by EDI using computer-to-computer EDI. If computer-to-computer... EDI. (d) When computer-to-computer EDI procedures will be used to place orders, the Contractor shall... electronic orders are placed, the transaction sets used, security procedures, and guidelines for...

48 CFR 552.216-72 - Placement of Orders.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Acquisition Service (FAS) will place all orders by EDI using computer-to-computer EDI. If computer-to-computer... EDI. (d) When computer-to-computer EDI procedures will be used to place orders, the Contractor shall... electronic orders are placed, the transaction sets used, security procedures, and guidelines for...

48 CFR 552.216-72 - Placement of Orders.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Acquisition Service (FAS) will place all orders by EDI using computer-to-computer EDI. If computer-to-computer... EDI. (d) When computer-to-computer EDI procedures will be used to place orders, the Contractor shall... electronic orders are placed, the transaction sets used, security procedures, and guidelines for...

48 CFR 552.216-72 - Placement of Orders.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Acquisition Service (FAS) will place all orders by EDI using computer-to-computer EDI. If computer-to-computer... EDI. (d) When computer-to-computer EDI procedures will be used to place orders, the Contractor shall... electronic orders are placed, the transaction sets used, security procedures, and guidelines for...

48 CFR 552.216-72 - Placement of Orders.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Acquisition Service (FAS) will place all orders by EDI using computer-to-computer EDI. If computer-to-computer... EDI. (d) When computer-to-computer EDI procedures will be used to place orders, the Contractor shall... electronic orders are placed, the transaction sets used, security procedures, and guidelines for...

Training strategies and materials.

DOT National Transportation Integrated Search

2014-06-01

TxDOT project 0-6706 Design and Scope of Impact of Auxiliary Lanes has developed : guidelines for implementation of auxiliary lanes including general guidelines on the use of : auxiliary lanes and design guidelines for auxiliary lanes. To facil...

Pelvic Normal Tissue Contouring Guidelines for Radiation Therapy: A Radiation Therapy Oncology Group Consensus Panel Atlas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gay, Hiram A., E-mail: hgay@radonc.wustl.edu; Barthold, H. Joseph; Beth Israel Deaconess Medical Center, Boston, MA

2012-07-01

Purpose: To define a male and female pelvic normal tissue contouring atlas for Radiation Therapy Oncology Group (RTOG) trials. Methods and Materials: One male pelvis computed tomography (CT) data set and one female pelvis CT data set were shared via the Image-Guided Therapy QA Center. A total of 16 radiation oncologists participated. The following organs at risk were contoured in both CT sets: anus, anorectum, rectum (gastrointestinal and genitourinary definitions), bowel NOS (not otherwise specified), small bowel, large bowel, and proximal femurs. The following were contoured in the male set only: bladder, prostate, seminal vesicles, and penile bulb. The followingmore » were contoured in the female set only: uterus, cervix, and ovaries. A computer program used the binomial distribution to generate 95% group consensus contours. These contours and definitions were then reviewed by the group and modified. Results: The panel achieved consensus definitions for pelvic normal tissue contouring in RTOG trials with these standardized names: Rectum, AnoRectum, SmallBowel, Colon, BowelBag, Bladder, UteroCervix, Adnexa{sub R}, Adnexa{sub L}, Prostate, SeminalVesc, PenileBulb, Femur{sub R}, and Femur{sub L}. Two additional normal structures whose purpose is to serve as targets in anal and rectal cancer were defined: AnoRectumSig and Mesorectum. Detailed target volume contouring guidelines and images are discussed. Conclusions: Consensus guidelines for pelvic normal tissue contouring were reached and are available as a CT image atlas on the RTOG Web site. This will allow uniformity in defining normal tissues for clinical trials delivering pelvic radiation and will facilitate future normal tissue complication research.« less

Void Growth and Coalescence Simulations

DTIC Science & Technology

2013-08-01

distortion and damage, minimum time step, and appropriate material model parameters. Further, a temporal and spatial convergence study was used to...estimate errors, thus, this study helps to provide guidelines for modeling of materials with voids. Finally, we use a Gurson model with Johnson-Cook...spatial convergence study was used to estimate errors, thus, this study helps to provide guidelines for modeling of materials with voids. Finally, we

Guideline for Optical Character Recognition Forms.

ERIC Educational Resources Information Center

National Bureau of Standards (DOC), Washington, DC.

This publication provides materials relating to the design, preparation, acquisition, inspection, and application of Optical Character Recognition (OCR) forms in data entry systems. Since the materials are advisory and tutorial in nature, this publication has been issued as a guideline rather than as a standard in the Federal Information…

Probabilistic Composite Design

NASA Technical Reports Server (NTRS)

Chamis, Christos C.

1997-01-01

Probabilistic composite design is described in terms of a computational simulation. This simulation tracks probabilistically the composite design evolution from constituent materials, fabrication process, through composite mechanics and structural components. Comparisons with experimental data are provided to illustrate selection of probabilistic design allowables, test methods/specimen guidelines, and identification of in situ versus pristine strength, For example, results show that: in situ fiber tensile strength is 90% of its pristine strength; flat-wise long-tapered specimens are most suitable for setting ply tensile strength allowables: a composite radome can be designed with a reliability of 0.999999; and laminate fatigue exhibits wide-spread scatter at 90% cyclic-stress to static-strength ratios.

Applications of Carbon Nanotubes in Biotechnology and Biomedicine

PubMed Central

Bekyarova, Elena; Ni, Yingchun; Malarkey, Erik B.; Montana, Vedrana; McWilliams, Jared L.; Haddon, Robert C.; Parpura, Vladimir

2009-01-01

Due to their electrical, chemical, mechanical and thermal properties, carbon nanotubes are one of the most promising materials for the electronics, computer and aerospace industries. Here, we discuss their properties in the context of future applications in biotechnology and biomedicine. The purification and chemical modification of carbon nanotubes with organic, polymeric and biological molecules are discussed. Additionally we review their uses in biosensors, assembly of structures and devices, scanning probe microscopy and as substrates for neuronal growth. We note that additional toxicity studies of carbon nanotubes are necessary so that exposure guidelines and safety regulations can be established in a timely manner. PMID:19763242

Suppression of radiation-induced point defects by rhenium and osmium interstitials in tungsten

PubMed Central

Suzudo, Tomoaki; Hasegawa, Akira

2016-01-01

Modeling the evolution of radiation-induced defects is important for finding radiation-resistant materials, which would be greatly appreciated in nuclear applications. We apply the density functional theory combined with comprehensive analyses of massive experimental database to indicate a mechanism to mitigate the effect of radiation on W crystals by adding particular solute elements that change the migration property of interstitials. The resultant mechanism is applicable to any body-centered-cubic (BCC) metals whose self-interstitial atoms become a stable crowdion and is expected to provide a general guideline for computational design of radiation-resistant alloys in the field of nuclear applications. PMID:27824134

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKenzie-Carter, M.A.; Lyon, R.E.; Rope, S.K.

This report contains information to support the Environmental Assessment for the Burning Plasma Experiment (BPX) Project proposed for the Princeton Plasma Physics Laboratory (PPPL). The assumptions and methodology used to assess the impact to members of the public from operational and accidental releases of radioactive material from the proposed BPX during the operational period of the project are described. A description of the tracer release tests conducted at PPPL by NOAA is included; dispersion values from these tests are used in the dose calculations. Radiological releases, doses, and resulting health risks are calculated and summarized. The computer code AIRDOS- EPA,more » which is part of the computer code system CAP-88, is used to calculate the individual and population doses for routine releases; FUSCRAC3 is used to calculate doses resulting from off-normal releases where direct application of the NOAA tracer test data is not practical. Where applicable, doses are compared to regulatory limits and guideline values. 48 refs., 16 tabs.« less

Courses About Computers--For Secondary School Students

ERIC Educational Resources Information Center

Mattei, K. C.

1974-01-01

Goals and guidelines for teaching courses about computers to secondary school students are discussed. A method of teaching introductory ideas of computer operations through the use of a programmable calculator is suggested. (DT)

HGML: a hypertext guideline markup language.

PubMed Central

Hagerty, C. G.; Pickens, D.; Kulikowski, C.; Sonnenberg, F.

2000-01-01

Existing text-based clinical practice guidelines can be difficult to put into practice. While a growing number of such documents have gained acceptance in the medical community and contain a wealth of valuable information, the time required to digest them is substantial. Yet the expressive power, subtlety and flexibility of natural language pose challenges when designing computer tools that will help in their application. At the same time, formal computer languages typically lack such expressiveness and the effort required to translate existing documents into these languages may be costly. We propose a method based on the mark-up concept for converting text-based clinical guidelines into a machine-operable form. This allows existing guidelines to be manipulated by machine, and viewed in different formats at various levels of detail according to the needs of the practitioner, while preserving their originally published form. PMID:11079898

Connect Computer Education to Policies.

ERIC Educational Resources Information Center

Kimmelman, Paul

1985-01-01

The computer phenomenon has made rapid inroads into school curricula, often without proper board guidance or approval. Accordingly, this pamphlet discusses why and how computer education should be provided in schools and sets forth guidelines for school board policy regarding computers. An umbrella policy is proposed, defining "computer literacy"…

Computational Design of Non-natural Sugar Alcohols to Increase Thermal Storage Density: Beyond Existing Organic Phase Change Materials.

PubMed

Inagaki, Taichi; Ishida, Toyokazu

2016-09-14

Thermal storage, a technology that enables us to control thermal energy, makes it possible to reuse a huge amount of waste heat, and materials with the ability to treat larger thermal energy are in high demand for energy-saving societies. Sugar alcohols are now one promising candidate for phase change materials (PCMs) because of their large thermal storage density. In this study, we computationally design experimentally unknown non-natural sugar alcohols and predict their thermal storage density as a basic step toward the development of new high performance PCMs. The non-natural sugar alcohol molecules are constructed in silico in accordance with the previously suggested molecular design guidelines: linear elongation of a carbon backbone, separated distribution of OH groups, and even numbers of carbon atoms. Their crystal structures are then predicted using the random search method and first-principles calculations. Our molecular simulation results clearly demonstrate that the non-natural sugar alcohols have potential ability to have thermal storage density up to ∼450-500 kJ/kg, which is significantly larger than the maximum thermal storage density of the present known organic PCMs (∼350 kJ/kg). This computational study suggests that, even in the case of H-bonded molecular crystals where the electrostatic energy contributes mainly to thermal storage density, the molecular distortion and van der Waals energies are also important factors to increase thermal storage density. In addition, the comparison between the three eight-carbon non-natural sugar alcohol isomers indicates that the selection of preferable isomers is also essential for large thermal storage density.

Son of SPECOPS: Rethinking the Nature and Operationalization of Cyberspace

DTIC Science & Technology

2012-04-27

argument, it is fair to assert that the initial placement of USCYBERCOM under USSTRATCOM made sense, prima facie , and allowed it to stand up and reach... guidelines can be disastrous. Such was the case in August 2007, when a B-52 accidentally transported six nuclear-tipped cruise missiles from Minot Air...and memory in computing technology, as captured by Moore’s Law, constitute the guideline for development in the computing and

The Design and Evaluation of African Language Learning Materials. Proceedings of the Spring 1984 Conference on Developing Guidelines for the Evaluation of African Language Learning Materials (East Lansing, Michigan, April 13-14, 1984).

ERIC Educational Resources Information Center

Dwyer, David J., Ed.

Representatives from major institutions teaching African languages convened to discuss the design of African language textbooks and to propose guidelines for the writing of new textbooks and evaluation of existing ones. Conference papers include: "Language Acquisition Theory and Materials Construction" (Stephen Krashen); "The Structures of Verbal…

Guidelines to Mathematics, K-8.

ERIC Educational Resources Information Center

Chambers, Donald L., Ed.

This document is a revised edition of the 1967 Guidelines to Mathematics, K-6, and is thought to reveal few changes in detail and no changes of substance. The guidelines are seen as firmly rooted in the successful curriculums of the past while encouraging changes appropriate to the needs of students who will be adults in the computer age. Major…

From Computer-interpretable Guidelines to Computer-interpretable Quality Indicators: A Case for an Ontology.

PubMed

White, Pam; Roudsari, Abdul

2014-01-01

In the United Kingdom's National Health Service, quality indicators are generally measured electronically by using queries and data extraction, resulting in overlap and duplication of query components. Electronic measurement of health care quality indicators could be improved through an ontology intended to reduce duplication of effort during healthcare quality monitoring. While much research has been published on ontologies for computer-interpretable guidelines, quality indicators have lagged behind. We aimed to determine progress on the use of ontologies to facilitate computer-interpretable healthcare quality indicators. We assessed potential for improvements to computer-interpretable healthcare quality indicators in England. We concluded that an ontology for a large, diverse set of healthcare quality indicators could benefit the NHS and reduce workload, with potential lessons for other countries.

Guidelines for development structured FORTRAN programs

NASA Technical Reports Server (NTRS)

Earnest, B. M.

1984-01-01

Computer programming and coding standards were compiled to serve as guidelines for the uniform writing of FORTRAN 77 programs at NASA Langley. Software development philosophy, documentation, general coding conventions, and specific FORTRAN coding constraints are discussed.

Guidelines for the selection of chemical-protective clothing. Volume 2. Technical and reference manual. (3rd Edition). Report for January 1985-March 1987

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwope, A.D.; Costas, P.P.; Jackson, J.O.

1987-02-01

A variety of protective-clothing items are commercially available for emergency response and other applications where chemical hazards may be encountered. Data and information for selecting chemical-protective clothing is either not available or is inconsistant from source to source. In 1983, the U.S. Environmental Protection Agency sponsored the development of chemical-protective clothing selection guidelines to assist their own Office of Health and Safety in providing guidance to personnel, primarily EPA employees and contractors, working on hazardous-waste sites. These guidelines allowed a user to select an appropriate protective material for a specific chemical, select a clothing item (glove, suit, etc.), and thenmore » determine which manufacturers offered the clothing item in the recommended material. The U.S, Coast Guard Office of Research and Development and the EPA have supplemented these guidelines with additional data on material chemical resistance, material physical properties, clothing design features, and specific-vendor products. A chapter has been added for selecting chemical-protective suits. These guidelines contain data for over 750 chemicals and 700 clothing products. Volume I provides performance information and recommendations for selecting different types of protective clothing. Volume II contains a detailed technical discussion, and the data on which Volume I recommendations are based. The U.S. Coast Guard intends to use these guidelines for protective-clothing selection by its National Strike Force and Marine Safety Offices.« less

10 CFR 960.5-1 - System guidelines.

Code of Federal Regulations, 2010 CFR

2010-01-01

... REPOSITORY Preclosure Guidelines § 960.5-1 System guidelines. (a) Qualifying conditions—(1) Preclosure... radioactive materials to restricted and unrestricted areas during repository operation and closure shall meet... repository siting, construction, operation, closure, and decommissioning the public and the environment shall...

Human computer interface guide, revision A

NASA Technical Reports Server (NTRS)

1993-01-01

The Human Computer Interface Guide, SSP 30540, is a reference document for the information systems within the Space Station Freedom Program (SSFP). The Human Computer Interface Guide (HCIG) provides guidelines for the design of computer software that affects human performance, specifically, the human-computer interface. This document contains an introduction and subparagraphs on SSFP computer systems, users, and tasks; guidelines for interactions between users and the SSFP computer systems; human factors evaluation and testing of the user interface system; and example specifications. The contents of this document are intended to be consistent with the tasks and products to be prepared by NASA Work Package Centers and SSFP participants as defined in SSP 30000, Space Station Program Definition and Requirements Document. The Human Computer Interface Guide shall be implemented on all new SSFP contractual and internal activities and shall be included in any existing contracts through contract changes. This document is under the control of the Space Station Control Board, and any changes or revisions will be approved by the deputy director.

The Treatment of Sex Roles. Guidelines for the Development of Elementary and Secondary Instructional Materials.

ERIC Educational Resources Information Center

Holt, Rinehart & Winston, New York, NY.

Arranged in three sections, this pamphlet outlines publishers' guidelines for developing nonsexist instructional materials for elementary and secondary school use. Section 1 details the following strategies for expanding and balancing the role models of both sexes in instructional literature: illustrations reflecting a variety of dress and…

Design Guidelines for the Development of Digital Nutrigenomics Learning Material for Heterogeneous Target Groups

ERIC Educational Resources Information Center

Busstra, Maria C.; Hartog, Rob; Kersten, Sander; Muller, Michael

2007-01-01

Nutritional genomics, or nutrigenomics, can be considered as the combination of molecular nutrition and genomics. Students who attend courses in nutrigenomics differ with respect to their prior knowledge. This study describes digital nutrigenomics learning material suitable for students from various backgrounds and provides design guidelines for…

Guidelines for the Production of Audio Materials for Print Handicapped Readers.

ERIC Educational Resources Information Center

National Library of Australia, Canberra.

Procedural guidelines developed by the Audio Standards Committee of the National Library of Australia to help improve the overall quality of production of audio materials for visually handicapped readers are presented. This report covers the following areas: selection of narrators and the narration itself; copyright; recording of books, magazines,…

Principles and Guidelines for Equitable Mathematics Teaching Practices and Materials for English Language Learners

ERIC Educational Resources Information Center

Moschkovich, Judit

2013-01-01

In this essay, the author describes principles for equitable mathematics teaching practices for English Language Learners (ELLs) and outlines guidelines for materials to support such practices. Although research cannot provide a recipe for equitable teaching practices for ELLs, teachers, educators, and administrators can use this set of…

77 FR 26660 - Guidelines for the Transfer of Excess Computers or Other Technical Equipment Pursuant to Section...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-07

....usda.gov . SUPPLEMENTARY INFORMATION: A. Background A proposed rule was published in the Federal.... Computers or other technical equipment means central processing units, laptops, desktops, computer mouses...

Perceived value of applying Information Communication Technology to implement guidelines in developing countries; an online questionnaire study among public health workers.

PubMed

Machingura, Pasipanodya Ian; Adekola, Olawumi; Mueni, Eunice; Oaiya, Omo; Gustafsson, Lars L; Heller, Richard F

2014-01-01

Practice guidelines can be used to support healthcare decision making. We sought to identify the use, and barriers to the implementation, of electronic based guidelines to support decision-making in maternal and child healthcare (MCH) and the rational use of medicines, in developing countries. Graduates who had gained the Master of Public Health degree through the Peoples-uni (postgraduate public health education in developing countries) were sent an online survey questionnaire which had been piloted. Two reminders were sent to non-respondents at intervals of 10 days. Results were explored using descriptive analyses. 44 of the potential 48 graduates from 16 countries responded - most were from Africa. 82% and 89% of respondents were aware of guidelines on MCH and the rational use of medicines respectively. Electronic guidelines were more available in university hospitals than in provincial hospitals or rural care. All respondents thought that guidelines could improve the delivery of quality care, and 42 (95%) and 41 (93%) respectively thought that computers and mobile or smartphones could increase the use of guidelines in service delivery. Lack of access to computers, need to buy phone credit, need for training in the use of either computerized or phone based guidelines and fear of increased workload were potential barriers to use. There is support for the use of electronic guidelines despite limited availability and barriers to use in developing countries. These findings, and other literature, provide a guide as to how the further development of ICT based guidelines may be implemented to improve health care decision making.

Management of Naturally Occurring Radioactive Materials (NORM) in Canada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baweja, Anar S.; Tracy, Bliss L.

2008-08-07

In Canada, nuclear and radiological regulatory responsibilities are shared between the provinces/territories and the federal government. The Canadian Nuclear Safety Commission (CNSC) regulates nuclear fuel cycle materials and man-made radionuclides under the Nuclear Safety and Control Act (2000). The provinces and territories regulate NORM arising from industrial activities, not involving the nuclear fuel cycle materials. Present guideline--Canadian Guidelines for the Management of Naturally Occurring Radioactive Materials (NORM)--was published in 2000 in order to bring uniformity to the management of NORM-related procedures to provide adequate radiation protection for workers and the general public. The basic premise of these guidelines is thatmore » the NORM-related activities should not be posing any greater hazard than those activities regulated under the Nuclear Safety and Control Act; these concepts are described in this paper.« less

[Development of analysis software package for the two kinds of Japanese fluoro-d-glucose-positron emission tomography guideline].

PubMed

Matsumoto, Keiichi; Endo, Keigo

2013-06-01

Two kinds of Japanese guidelines for the data acquisition protocol of oncology fluoro-D-glucose-positron emission tomography (FDG-PET)/computed tomography (CT) scans were created by the joint task force of the Japanese Society of Nuclear Medicine Technology (JSNMT) and the Japanese Society of Nuclear Medicine (JSNM), and published in Kakuigaku-Gijutsu 27(5): 425-456, 2007 and 29(2): 195-235, 2009. These guidelines aim to standardize PET image quality among facilities and different PET/CT scanner models. The objective of this study was to develop a personal computer-based performance measurement and image quality processor for the two kinds of Japanese guidelines for oncology (18)F-FDG PET/CT scans. We call this software package the "PET quality control tool" (PETquact). Microsoft Corporation's Windows(™) is used as the operating system for PETquact, which requires 1070×720 image resolution and includes 12 different applications. The accuracy was examined for numerous applications of PETquact. For example, in the sensitivity application, the system sensitivity measurement results were equivalent when comparing two PET sinograms obtained from the PETquact and the report. PETquact is suited for analysis of the two kinds of Japanese guideline, and it shows excellent spec to performance measurements and image quality analysis. PETquact can be used at any facility if the software package is installed on a laptop computer.

The impact of computer display height and desk design on muscle activity during information technology work by young adults.

PubMed

Straker, L; Pollock, C; Burgess-Limerick, R; Skoss, R; Coleman, J

2008-08-01

Computer display height and desk design are believed to be important workstation features and are included in international standards and guidelines. However, the evidence base for these guidelines is lacking a comparison of neck/shoulder muscle activity during computer and paper tasks and whether forearm support can be provided by desk design. This study measured the spinal and upper limb muscle activity in 36 young adults whilst they worked in different computer display, book and desk conditions. Display height affected spinal muscle activity with paper tasks resulting in greater mean spinal and upper limb muscle activity. A curved desk resulted in increased proximal muscle activity. There was no substantial interaction between display and desk.

Report of the Task Force on Computer Charging.

ERIC Educational Resources Information Center

Computer Co-ordination Group, Ottawa (Ontario).

The objectives of the Task Force on Computer Charging as approved by the Committee of Presidents of Universities of Ontario were: (1) to identify alternative methods of costing computing services; (2) to identify alternative methods of pricing computing services; (3) to develop guidelines for the pricing of computing services; (4) to identify…

Guidelines for the use of fiberglass reinforced plastic in utility FGD systems. [Flue gas desulfurization (FGD); contains glossary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rapoza, R.J.; Vollmer, H.R.; Haberly, K.L.

1992-11-01

Fiberglass reinforced plastic (FRP) materials offer excellent corrosion-resistant properties and long-term cost advantages compared to exotic alloys or organic lining systems. This guideline document provides potential buyers of FRP FGD (flue gas desulfurization) equipment with enough knowledge of FRP materials and methods to make informed decisions when procuring FRP equipment or services. It is divided into the following chapters: application criteria, procurement strategies, FRP basics, guidelines for designing FRP equipment, quality management. A glossary and manufacturers information/recommendations are included.

Update of guidelines for surgical endodontics - the position after ten years.

PubMed

Evans, G E; Bishop, K; Renton, T

2012-05-25

This is the first of a series of articles, which will summarise new or updated clinical guidelines produced by the Clinical Standards Committee of the Faculty of Dental Surgery, Royal College of Surgeons of England (FDSRCS). Important developments for the dental profession from a number of clinical guidelines will be presented, commencing with the Guidelines for surgical endodontics. The impact of recent evidence relating to the outcome of surgical endodontics and techniques such as cone beam computed tomography and microsurgical techniques are considered.

PCs and Personal Health.

ERIC Educational Resources Information Center

Lombardi, Don

1991-01-01

Studies suggest that computer work stations may induce high levels of physical and psychological stress. Advises school districts to take a proactive stance on ergonomics. Cites laws and pending litigation regulating computer use in the workspace and offers guidelines for computer users. (MLF)

Guidelines for Audiovisual and Multimedia Materials in Libraries and Other Institutions. Audiovisual and Multimedia Section

ERIC Educational Resources Information Center

International Federation of Library Associations and Institutions (NJ1), 2004

2004-01-01

This set of guidelines, for audiovisual and multimedia materials in libraries of all kinds and other appropriate institutions, is the product of many years of consultation and collaborative effort. As early as 1972, The UNESCO (United Nations Educational, Scientific and Cultural Organization) Public Library Manifesto had stressed the need for…

Making Language Work Better for Handicapped People and Everyone Else. A Guide for Writers, Editors, and Publishers.

ERIC Educational Resources Information Center

Mullins, June

Intended for producers of educational materials, the document offers guidelines to assure that print and nonprint educational materials reflect a positive, fair, and balanced representation of persons with exceptionalities. Nine guidelines are discussed: (1) 10% of the contents should include or represent children or adults with an exceptionality;…

Instructional Computing in the Community Colleges of Washington State.

ERIC Educational Resources Information Center

Howard, Alan; And Others

A description of current activities in instructional computing in Washington State community colleges is presented, along with curriculum content guidelines and planning procedures to assist colleges which plan to initiate or upgrade their activities in instructional computing. The document provides an overview of computing activities in the…

SisPorto 4.0 - computer analysis following the 2015 FIGO Guidelines for intrapartum fetal monitoring.

PubMed

Ayres-de-Campos, Diogo; Rei, Mariana; Nunes, Inês; Sousa, Paulo; Bernardes, João

2017-01-01

SisPorto 4.0 is the most recent version of a program for the computer analysis of cardiotocographic (CTG) signals and ST events, which has been adapted to the 2015 International Federation of Gynaecology and Obstetrics (FIGO) guidelines for intrapartum foetal monitoring. This paper provides a detailed description of the analysis performed by the system, including the signal-processing algorithms involved in identification of basic CTG features and the resulting real-time alerts.

Design Guidelines for Shielding Effectiveness, Current Carrying Capability, and the Enhancement of Conductivity of Composite Materials

NASA Technical Reports Server (NTRS)

Evans, R. W.

1997-01-01

These guidelines address the electrical properties of composite materials which may have an effect on electromagnetic compatibility (EMC). The main topics of the guidelines include the electrical shielding, fault current return, and lightning protection capabilities of graphite reinforced polymers, since they are somewhat conductive but may require enhancement to be adequate for EMC purposes. Shielding effectiveness depends heavily upon the conductivity of the material. Graphite epoxy can provide useful shielding against RF signals, but it is approximately 1,000 times more resistive than good conductive metals. The reduced shielding effectiveness is significant but is still useful in many cases. The primary concern is with gaps and seams in the material just as it is with metal. Current carrying capability of graphite epoxy is adequate for dissipation static charges, but fault currents through graphite epoxy may cause fire at the shorting contact and at joints. The effect of lightning on selected graphite epoxy material and mating surfaces is described, and protection methods are reviewed.

Renal-related adverse effects of intravenous contrast media in computed tomography

PubMed Central

Leow, Kheng Song; Wu, Yi Wei; Tan, Cher Heng

2015-01-01

Renal-related adverse effects of intravascular contrast media (CM) include contrast-induced nephropathy in computed tomography and angiography. While large retrospective studies have been published, the exact pathogenesis of this condition is still unknown. We review the main international guidelines, including the American College of Radiology white paper and the guidelines of European Society of Urogenital Radiology, Royal College of Radiologists and Canadian Association of Radiologists, as well as their references, regarding this subject. We present a simplified, concise approach to renal-related adverse effects of CM, taking into consideration the basis for each recommendation in these published guidelines. This will allow the reader to better understand the rationale behind appropriate patient preparation for cross-sectional imaging. PMID:25917468

Development of qualification guidelines for personal computer-based aviation training devices.

DOT National Transportation Integrated Search

1995-02-01

Recent advances in the capabilities of personal computers have resulted in an increase in the number of flight simulation programs made available as Personal Computer-Based Aviation Training Devices (PCATDs).The potential benefits of PCATDs have been...

7 CFR 3203.4 - Procedures.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., DEPARTMENT OF AGRICULTURE GUIDELINES FOR THE TRANSFER OF EXCESS COMPUTERS OR OTHER TECHNICAL EQUIPMENT..., in writing, an authorized official to approve transfers of excess computers or other technical...) Excess computers or other technical equipment must first be internally screened to ensure it is not...

7 CFR 3203.4 - Procedures.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., DEPARTMENT OF AGRICULTURE GUIDELINES FOR THE TRANSFER OF EXCESS COMPUTERS OR OTHER TECHNICAL EQUIPMENT..., in writing, an authorized official to approve transfers of excess computers or other technical...) Excess computers or other technical equipment must first be internally screened to ensure it is not...

Guidelines for the Design, Fabrication, Testing, Installation and Operation of Srf Cavities

NASA Astrophysics Data System (ADS)

Theilacker, J.; Carter, H.; Foley, M.; Hurh, P.; Klebaner, A.; Krempetz, K.; Nicol, T.; Olis, D.; Page, T.; Peterson, T.; Pfund, P.; Pushka, D.; Schmitt, R.; Wands, R.

2010-04-01

Superconducting Radio-Frequency (SRF) cavities containing cryogens under pressure pose a potential rupture hazard to equipment and personnel. Generally, pressure vessels fall within the scope of the ASME Boiler and Pressure Vessel Code however, the use of niobium as a material for the SRF cavities is beyond the applicability of the Code. Fermilab developed a guideline to ensure sound engineering practices governing the design, fabrication, testing, installation and operation of SRF cavities. The objective of the guideline is to reduce hazards and to achieve an equivalent level of safety afforded by the ASME Code. The guideline addresses concerns specific to SRF cavities in the areas of materials, design and analysis, welding and brazing, pressure relieving requirements, pressure testing and quality control.

Child Development Guidelines. (Revised Edition).

ERIC Educational Resources Information Center

California State Dept. of Education, Sacramento.

This publication represents the compilation of various statutes, regulations, state plan materials, and guidelines developed by the Office of Child Development of the California State Department of Education, which are applicable to subsidized child care service programs. It is the intent of these guidelines to assist eligible agencies in the…

District Computer Concerns: Checklist for Monitoring Instructional Use of Computers.

ERIC Educational Resources Information Center

Coe, Merilyn

Designed to assist those involved with planning, organizing, and implementing computer use in schools, this checklist can be applied to: (1) assess the present state of instructional computer use in the district; (2) assist with the development of plans or guidelines for computer use; (3) support a start-up phase; and (4) monitor the…

A systematic review and appraisal of the quality of practice guidelines for the management of Neisseria gonorrhoeae infections.

PubMed

Dickson, Catherine; Arnason, Trevor; Friedman, Dara Spatz; Metz, Gila; Grimshaw, Jeremy M

2017-11-01

Clinical guidelines help ensure consistent care informed by current evidence. As shifts in antimicrobial resistance continue to influence first-line treatment, up-to-date guidelines are important for preventing treatment failure. A guideline's development process will influence its recommendations and users' trust. To assess the quality of current gonorrhoea guidelines' development processes. Multiple databases. Original and current English-language guidelines targeting health professionals and containing treatment recommendations for uncomplicated gonorrhoea in the general adult population. Two appraisers assessed the guidelines independently using the Appraisal of Guidelines for Research and Evaluation II (AGREE II) tool. Scores were combined as per the AGREE II users' manual. We identified 10 guidelines meeting the inclusion criteria. The quality of the gonorrhoea treatment guidelines varied. Most scored poorly on Rigour of Development ; information on the evidence review process and methods for formulating recommendations was often missing. The WHO Guidelines for the Treatment of Neisseria gonorrhoeae and UK National Guideline for the Management of Gonorrhoea in Adults scored the highest on Rigour of Development . Methods to address conflicts of interest were often not described in the materials reviewed. Implementation of recommendations was often not addressed. By limiting our study to English-language guidelines, a small number of guidelines we identified were excluded. Our analysis was limited to either published or online materials that were readily available to users. We could not differentiate between items addressed in the development process but not documented from items that were not addressed. Gonorrhoea treatment guidelines may slow antimicrobial resistance. Many current guidelines are not in line with the current guideline development best practices; this might undermine the perceived trustworthiness of guidelines. By identifying current limitations, this study can help improve the quality of future guidelines. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Influence of mesh density, cortical thickness and material properties on human rib fracture prediction.

PubMed

Li, Zuoping; Kindig, Matthew W; Subit, Damien; Kent, Richard W

2010-11-01

The purpose of this paper was to investigate the sensitivity of the structural responses and bone fractures of the ribs to mesh density, cortical thickness, and material properties so as to provide guidelines for the development of finite element (FE) thorax models used in impact biomechanics. Subject-specific FE models of the second, fourth, sixth and tenth ribs were developed to reproduce dynamic failure experiments. Sensitivity studies were then conducted to quantify the effects of variations in mesh density, cortical thickness, and material parameters on the model-predicted reaction force-displacement relationship, cortical strains, and bone fracture locations for all four ribs. Overall, it was demonstrated that rib FE models consisting of 2000-3000 trabecular hexahedral elements (weighted element length 2-3mm) and associated quadrilateral cortical shell elements with variable thickness more closely predicted the rib structural responses and bone fracture force-failure displacement relationships observed in the experiments (except the fracture locations), compared to models with constant cortical thickness. Further increases in mesh density increased computational cost but did not markedly improve model predictions. A ±30% change in the major material parameters of cortical bone lead to a -16.7 to 33.3% change in fracture displacement and -22.5 to +19.1% change in the fracture force. The results in this study suggest that human rib structural responses can be modeled in an accurate and computationally efficient way using (a) a coarse mesh of 2000-3000 solid elements, (b) cortical shells elements with variable thickness distribution and (c) a rate-dependent elastic-plastic material model. Copyright © 2010 IPEM. Published by Elsevier Ltd. All rights reserved.

Mammography Patient Information at Hospital Websites: Most Neither Comprehensible Nor Guideline Supported.

PubMed

Sadigh, Gelareh; Singh, Kush; Gilbert, Kirven; Khan, Ramsha; Duszak, Abigail M; Duszak, Richard

2016-11-01

Ongoing controversy regarding screening mammography guidelines has created confusion for many patients. Given recommendations that patient educational material be prepared at or below the 7th grade reading level of average Americans, the purpose of this study was to assess the readability of online mammography information offered by hospitals nationwide. During 2015, online mammography patient educational materials were identified for all Medicare-recognized hospitals nationwide for which screening mammography metrics were publicly available. Patient educational materials were assessed using six validated readability score algorithms. All references to official screening guidelines were captured. Of 4105 hospitals nationwide, 3252 had websites and confirmable screening mammography services. Of those, 1753 (54%) offered mammography information material online. Only 919 (28%) referenced any professional society guidelines. After excluding information not formatted in HTML and shorter than 100 words (to improve algorithm reliability), 1524 hospital mammography webpages were assessed for grade level scores. Nationally, the mean of each readability score for all hospitals varied between the 10th and 14th grade levels, all higher than the recommended 7th grade level (p < 0.001). At the individual hospital level, only 14 hospitals (0.4%) had mean scores at or below the 7th grade level. Of U.S. hospitals that offer screening mammography and have websites, only 54% provide online mammography educational material. Of those, only 0.4% present information at a reading level comprehensible to average Americans, and only 28% offer specific information to help patients reconcile conflicting guidelines. Health systems offering mammography should strive to better meet women's health information and literacy needs.

Overview of Computer Security Certification and Accreditation. Final Report.

ERIC Educational Resources Information Center

Ruthberg, Zella G.; Neugent, William

Primarily intended to familiarize ADP (automatic data processing) policy and information resource managers with the approach to computer security certification and accreditation found in "Guideline to Computer Security Certification and Accreditation," Federal Information Processing Standards Publications (FIPS-PUB) 102, this overview…

Best Practice Guidelines for Computer Technology in the Montessori Early Childhood Classroom.

ERIC Educational Resources Information Center

Montminy, Peter

1999-01-01

Presents a draft for a principle-centered position statement of a Montessori early childhood program in central Pennsylvania, on the pros and cons of computer use in a Montessori 3-6 classroom. Includes computer software rating form. (Author/KB)

Junior and Senior High School English Department Evaluation Guidelines.

ERIC Educational Resources Information Center

California Association of Teachers of English, Redlands.

These guidelines have been designed to support and upgrade English as a field of study and to suggest certain standards, approaches, and materials that will strengthen junior and senior high school English departments. The guidelines deal with several areas that have relevance for English instruction: philosophy; curriculum and instruction…

IPEG- IMPROVED PRICE ESTIMATION GUIDELINES (IBM PC VERSION)

NASA Technical Reports Server (NTRS)

Aster, R. W.

1994-01-01

The Improved Price Estimation Guidelines, IPEG, program provides a simple yet accurate estimate of the price of a manufactured product. IPEG facilitates sensitivity studies of price estimates at considerably less expense than would be incurred by using the Standard Assembly-line Manufacturing Industry Simulation, SAMIS, program (COSMIC program NPO-16032). A difference of less than one percent between the IPEG and SAMIS price estimates has been observed with realistic test cases. However, the IPEG simplification of SAMIS allows the analyst with limited time and computing resources to perform a greater number of sensitivity studies than with SAMIS. Although IPEG was developed for the photovoltaics industry, it is readily adaptable to any standard assembly line type of manufacturing industry. IPEG estimates the annual production price per unit. The input data includes cost of equipment, space, labor, materials, supplies, and utilities. Production on an industry wide basis or a process wide basis can be simulated. Once the IPEG input file is prepared, the original price is estimated and sensitivity studies may be performed. The IPEG user selects a sensitivity variable and a set of values. IPEG will compute a price estimate and a variety of other cost parameters for every specified value of the sensitivity variable. IPEG is designed as an interactive system and prompts the user for all required information and offers a variety of output options. The IPEG/PC program is written in TURBO PASCAL for interactive execution on an IBM PC computer under DOS 2.0 or above with at least 64K of memory. The IBM PC color display and color graphics adapter are needed to use the plotting capabilities in IPEG/PC. IPEG/PC was developed in 1984. The original IPEG program is written in SIMSCRIPT II.5 for interactive execution and has been implemented on an IBM 370 series computer with a central memory requirement of approximately 300K of 8 bit bytes. The original IPEG was developed in 1980.

IPEG- IMPROVED PRICE ESTIMATION GUIDELINES (IBM 370 VERSION)

NASA Technical Reports Server (NTRS)

Chamberlain, R. G.

1994-01-01

The Improved Price Estimation Guidelines, IPEG, program provides a simple yet accurate estimate of the price of a manufactured product. IPEG facilitates sensitivity studies of price estimates at considerably less expense than would be incurred by using the Standard Assembly-line Manufacturing Industry Simulation, SAMIS, program (COSMIC program NPO-16032). A difference of less than one percent between the IPEG and SAMIS price estimates has been observed with realistic test cases. However, the IPEG simplification of SAMIS allows the analyst with limited time and computing resources to perform a greater number of sensitivity studies than with SAMIS. Although IPEG was developed for the photovoltaics industry, it is readily adaptable to any standard assembly line type of manufacturing industry. IPEG estimates the annual production price per unit. The input data includes cost of equipment, space, labor, materials, supplies, and utilities. Production on an industry wide basis or a process wide basis can be simulated. Once the IPEG input file is prepared, the original price is estimated and sensitivity studies may be performed. The IPEG user selects a sensitivity variable and a set of values. IPEG will compute a price estimate and a variety of other cost parameters for every specified value of the sensitivity variable. IPEG is designed as an interactive system and prompts the user for all required information and offers a variety of output options. The IPEG/PC program is written in TURBO PASCAL for interactive execution on an IBM PC computer under DOS 2.0 or above with at least 64K of memory. The IBM PC color display and color graphics adapter are needed to use the plotting capabilities in IPEG/PC. IPEG/PC was developed in 1984. The original IPEG program is written in SIMSCRIPT II.5 for interactive execution and has been implemented on an IBM 370 series computer with a central memory requirement of approximately 300K of 8 bit bytes. The original IPEG was developed in 1980.

Computer Documentation: Effects on Students' Computing Behaviors, Attitudes, and Use of Computers.

ERIC Educational Resources Information Center

Duin, Ann Hill

This study investigated the effects of a minimal manual version versus a cards version of documentation on students' computing behaviors while learning to use a telecommunication system (Appleshare), students' attitudes toward the documentation, and students' later use of the system. Guidelines from the work of Carroll and colleagues at the IBM…

ComputerTown. A Do-It-Yourself Community Computer Project.

ERIC Educational Resources Information Center

Loop, Liza; And Others

This manual based on Menlo Park's experiences in participating in a nationwide experimental computer literacy project provides guidelines for the development and management of a ComputerTown. This project, which was begun in September 1981 in the Menlo Park Public Library, concentrates on providing public access to microcomputers through hands-on…

Nanobioinformatics: Emerging Computational Tools to Understand Nano-Bio Interaction

DTIC Science & Technology

2012-11-16

followed for using animals for toxicity studies, Organization for Economic Co- operation and Development ( OECD ) has set guidelines for toxicity studies...operation and Development ( OECD ) has set guidelines for toxicity studies in guideline number 420, which says that only dosages of 50-2000 mg/kg body weight...GSH, SOD, GSSH, MDA, ALK , ALT, LDH), Cell lines. Preprocessing: After collection of data from the published articles preprocessing of the data is

Combining Task Execution and Background Knowledge for the Verification of Medical Guidelines

NASA Astrophysics Data System (ADS)

Hommersom, Arjen; Groot, Perry; Lucas, Peter; Balser, Michael; Schmitt, Jonathan

The use of a medical guideline can be seen as the execution of computational tasks, sequentially or in parallel, in the face of patient data. It has been shown that many of such guidelines can be represented as a 'network of tasks', i.e., as a number of steps that have a specific function or goal. To investigate the quality of such guidelines we propose a formalization of criteria for good practice medicine a guideline should comply to. We use this theory in conjunction with medical background knowledge to verify the quality of a guideline dealing with diabetes mellitus type 2 using the interactive theorem prover KIV. Verification using task execution and background knowledge is a novel approach to quality checking of medical guidelines.

13 point video tape quality guidelines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gaunt, R.

1997-05-01

Until high definition television (ATV) arrives, in the U.S. we must still contend with the National Television Systems Committee (NTSC) video standard (or PAL or SECAM-depending on your country). NTSC, a 40-year old standard designed for transmission of color video camera images over a small bandwidth, is not well suited for the sharp, full-color images that todays computers are capable of producing. PAL and SECAM also suffers from many of NTSC`s problems, but to varying degrees. Video professionals, when working with computer graphic (CG) images, use two monitors: a computer monitor for producing CGs and an NTSC monitor to viewmore » how a CG will look on video. More often than not, the NTSC image will differ significantly from the CG image, and outputting it to NTSC as an artist works enables the him or her to see the images as others will see it. Below are thirteen guidelines designed to increase the quality of computer graphics recorded onto video tape. Viewing your work in NTSC and attempting to follow the below tips will enable you to create higher quality videos. No video is perfect, so don`t expect to abide by every guideline every time.« less

Web-based computer-tailoring for practice nurses aimed to improve smoking cessation guideline adherence: A study protocol for a randomized controlled effectiveness trial.

PubMed

de Ruijter, D; Smit, E S; de Vries, H; Hoving, C

2016-05-01

Dutch practice nurses sub-optimally adhere to evidence-based smoking cessation guidelines. Web-based computer-tailoring could be effective in improving their guideline adherence. Therefore, this paper aims to describe the development of a web-based computer-tailored program and the design of a randomized controlled trial testing its (cost-)effectiveness. Theoretically grounded in the I-Change Model and Self-Determination Theory, and based on the results of a qualitative needs assessment among practice nurses, a web-based computer-tailored program was developed including three modules with tailored advice, an online forum, modules with up-to-date information about smoking cessation, Frequently Asked Questions (FAQs) and project information, and a counseling checklist. The program's effects are assessed by comparing an intervention group (access to all modules) with a control group (access to FAQs, project information and counseling checklist only). Smoking cessation guideline adherence and behavioral predictors (i.e. intention, knowledge, attitude, self-efficacy, social influence, action and coping planning) are measured at baseline and at 6- and 12-month follow-up. Additionally, the program's indirect effects on smokers' quit rates and the number of quit attempts are assessed after 6 and 12months. This paper describes the development of a web-based computer-tailored adherence support program for practice nurses and the study design of a randomized controlled trial testing its (cost-)effectiveness. This program potentially contributes to improving the quality of smoking cessation care in Dutch general practices. If proven effective, the program could be adapted for use by other healthcare professionals, increasing the public health benefits of improved smoking cessation counseling for smokers. Copyright © 2016 Elsevier Inc. All rights reserved.

Marginal adaptation of full-coverage CAD/CAM restorations: in vitro study using a non-destructive method.

PubMed

Romeo, E; Iorio, M; Storelli, S; Camandona, M; Abati, S

2009-03-01

Marginal fit of full-coverage crowns is a major requirement for long term success of this kind of restorations. The purpose of the study was to verify the marginal adaptation of computer assisted design (CAD)/computer assisted manufacturing (CAM) crowns on prepared teeth and on plaster dies. Four couples of materials: zirconia-ceramic veneering (DC-Zircon, DCS Dental, Allschwill, CH/Cercon S, Degussa, DeguDent GmbH, Hanau, Germany), fiber-reinforced composite-composite veneering (DC-Tell, DCS Dental/Gradia, GC Europe, LEuven, Belgium), titanium-ceramic veneering (DC Titan, DCS Dental/Tikrom, Orotig, Verona, Italy) and titanium-composite veneering (DC Titan, DCS Dental/Gradia, GC Europe) were evaluated following the guidelines provided by ADA specific #8. Five crowns were fabricated for each material. Marginal gap values were measured at four points (0 degrees, 90 degrees, 180 degrees and 270 degrees starting from the centre of the vestibular surface) around the finishing line, on prepared teeth and on plaster dies at each step of the fabrication process. Digital photographs were taken at each reference point and a computer software was used to measure the amount of marginal discrepancy in microm. Statistical analysis was performed using t test at 95 percent confidence interval. All the tested materials, except for fiber-reinforced composite, show a marginal adaptation within the limits of ADA specification (25-40 microm). The application of veneering material causes decay in marginal adaptation, except for fiber-reinforced composite. Within the limitations of this study, it was concluded that marginal fit of CAD/CAM restoration is within the limits considered clinically acceptable by ADA specification #8. From the results of this in vitro study, it can be stated that CAD/CAM crowns produced with DCS system show a marginal adaptation within the limits of ADA specific #8, therefore milled CAD/CAM crowns can be considered a good alternative to more traditional waxing-investing-casting technique.

Computer Assisted Rehabilitation Service Delivery.

ERIC Educational Resources Information Center

West Virginia Rehabilitation Research and Training Center, Dunbar.

This volume consisting of state of the art reviews, suggestions and guidelines for practitioners, and program descriptions deals with the current and potential applications of computers in the delivery of services for vocational rehabilitation (VR). Discussed first are current applications of computer technology in rehabilitative service delivery.…

7 CFR 3203.9 - Accountability and recordkeeping.

Code of Federal Regulations, 2014 CFR

2014-01-01

... recordkeeping. (a) USDA requires all excess computers or other technical equipment received by an eligible... review the reports for accuracy, as well as fair and equitable distribution of the excess computers or... PROPERTY MANAGEMENT, DEPARTMENT OF AGRICULTURE GUIDELINES FOR THE TRANSFER OF EXCESS COMPUTERS OR OTHER...

7 CFR 3203.9 - Accountability and recordkeeping.

Code of Federal Regulations, 2013 CFR

2013-01-01

... recordkeeping. (a) USDA requires all excess computers or other technical equipment received by an eligible... review the reports for accuracy, as well as fair and equitable distribution of the excess computers or... PROPERTY MANAGEMENT, DEPARTMENT OF AGRICULTURE GUIDELINES FOR THE TRANSFER OF EXCESS COMPUTERS OR OTHER...

2013 ACC/AHA guideline on the treatment of blood cholesterol to reduce atherosclerotic cardiovascular risk in adults: A report of the American College of Cardiology/American Heart Association task force on practice guidelines

USDA-ARS?s Scientific Manuscript database

This guideline is based on the Full Panel Report which is provided as a data supplement to the guideline. The Full Panel Report contains background and additional material related to content, methodology, evidence synthesis, rationale and references and is supported by the NHLBI Systematic Evidence ...

16 CFR 1115.26 - Guidelines and policies.

Code of Federal Regulations, 2014 CFR

2014-01-01

... SUBSTANTIAL PRODUCT HAZARD REPORTS Guidelines and Requirements for Mandatory Recall Notices § 1115.26... minimize the use of highly technical or legal terminology. (3) A recall notice should be targeted and...; (ii) Computer, radio, television, or other electronic transmission or medium; (iii) Video news release...

16 CFR 1115.26 - Guidelines and policies.

Code of Federal Regulations, 2012 CFR

2012-01-01

... SUBSTANTIAL PRODUCT HAZARD REPORTS Guidelines and Requirements for Mandatory Recall Notices § 1115.26... minimize the use of highly technical or legal terminology. (3) A recall notice should be targeted and...; (ii) Computer, radio, television, or other electronic transmission or medium; (iii) Video news release...

A theory-based evaluation of a dissemination intervention to improve childcare cooks' intentions to implement nutritional guidelines on their menus.

PubMed

Yoong, Sze Lin; Jones, Jannah; Marshall, Josephine; Wiggers, John; Seward, Kirsty; Finch, Meghan; Fielding, Alison; Wolfenden, Luke

2016-07-25

Childcare services represent a key setting to implement nutritional interventions to support the development of healthy eating behaviours in young children. Childcare-specific nutritional guidelines outlining recommendations for provision of food in care have been developed. Despite this, research suggests that few childcare services currently implement these guidelines. This study aimed to examine the impact of providing printed educational materials on childcare service cooks' intentions to use nutritional guidelines and provide fruit and vegetables on their menu. A randomised controlled trial was conducted with 77 childcare services (38 control and 39 intervention). Intervention service cooks were mailed a two-page educational material together with a menu planning checklist. Intervention development and evaluation was guided by the theory of planned behaviour. Outcome data assessing intentions to use nutritional guidelines and serves of fruit and vegetables provided on menus (primary outcomes) as well as secondary outcomes (attitudes, behavioural regulation and social norms) were collected via a telephone interview with cooks. Relative to the comparison group, cooks in the intervention arm had significantly higher intentions to use the guidelines (p value 0.0005), accompanied by significant changes in perceived behavioural control (p value 0.0008) and attitudes (p value 0.0071). No significant difference in serves of fruit (p value 0.7278) and vegetables (p value 0.0573) was observed. The use of educational materials can improve childcare service cooks' intentions to use nutritional guidelines; however, as a standalone strategy, it may not improve provision of food on menus.

Training strategies and materials.

DOT National Transportation Integrated Search

2008-08-01

TxDOT project 0-5840 Development of Left-Turn Operations Guidelines at Signalized Intersections has developed : guidelines for recommending the most appropriate left-turn phasing treatments at signalized intersections by investigating all : asp...

75 FR 20358 - Intra-Agency Appeal Process: Guidelines for Appeals of Material Supervisory Determinations and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-19

... decisional deadline for written decisions by the SARC. Also, both the SARC Guidelines and the AAC Guidelines have been amended to make additional, limited technical clarifying and conforming amendments. Both sets... action or decision, and to make limited technical amendments. (73 FR 54822 (Sept. 23, 2008)). Although...

Screen Design Guidelines for Motivation in Interactive Multimedia Instruction: A Survey and Framework for Designers.

ERIC Educational Resources Information Center

Lee, Sung Heum; Boling, Elizabeth

1999-01-01

Identifies guidelines from the literature relating to screen design and design of interactive instructional materials. Describes two types of guidelines--those aimed at enhancing motivation and those aimed at preventing loss of motivation--for typography, graphics, color, and animation and audio. Proposes a framework for considering motivation in…

Aerodynamic design guidelines and computer program for estimation of subsonic wind tunnel performance

NASA Technical Reports Server (NTRS)

Eckert, W. T.; Mort, K. W.; Jope, J.

1976-01-01

General guidelines are given for the design of diffusers, contractions, corners, and the inlets and exits of non-return tunnels. A system of equations, reflecting the current technology, has been compiled and assembled into a computer program (a user's manual for this program is included) for determining the total pressure losses. The formulation presented is applicable to compressible flow through most closed- or open-throat, single-, double-, or non-return wind tunnels. A comparison of estimated performance with that actually achieved by several existing facilities produced generally good agreement.

NSR&D Program Fiscal Year 2015 Funded Research Stochastic Modeling of Radioactive Material Releases Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrus, Jason P.; Pope, Chad; Toston, Mary

2016-12-01

Nonreactor nuclear facilities operating under the approval authority of the U.S. Department of Energy use unmitigated hazard evaluations to determine if potential radiological doses associated with design basis events challenge or exceed dose evaluation guidelines. Unmitigated design basis events that sufficiently challenge dose evaluation guidelines or exceed the guidelines for members of the public or workers, merit selection of safety structures, systems, or components or other controls to prevent or mitigate the hazard. Idaho State University, in collaboration with Idaho National Laboratory, has developed a portable and simple to use software application called SODA (Stochastic Objective Decision-Aide) that stochastically calculatesmore » the radiation dose distribution associated with hypothetical radiological material release scenarios. Rather than producing a point estimate of the dose, SODA produces a dose distribution result to allow a deeper understanding of the dose potential. SODA allows users to select the distribution type and parameter values for all of the input variables used to perform the dose calculation. Users can also specify custom distributions through a user defined distribution option. SODA then randomly samples each distribution input variable and calculates the overall resulting dose distribution. In cases where an input variable distribution is unknown, a traditional single point value can be used. SODA, developed using the MATLAB coding framework, has a graphical user interface and can be installed on both Windows and Mac computers. SODA is a standalone software application and does not require MATLAB to function. SODA provides improved risk understanding leading to better informed decision making associated with establishing nuclear facility material-at-risk limits and safety structure, system, or component selection. It is important to note that SODA does not replace or compete with codes such as MACCS or RSAC; rather it is viewed as an easy to use supplemental tool to help improve risk understanding and support better informed decisions. The SODA development project was funded through a grant from the DOE Nuclear Safety Research and Development Program.« less

NSR&D Program Fiscal Year 2015 Funded Research Stochastic Modeling of Radioactive Material Releases Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrus, Jason P.; Pope, Chad; Toston, Mary

Nonreactor nuclear facilities operating under the approval authority of the U.S. Department of Energy use unmitigated hazard evaluations to determine if potential radiological doses associated with design basis events challenge or exceed dose evaluation guidelines. Unmitigated design basis events that sufficiently challenge dose evaluation guidelines or exceed the guidelines for members of the public or workers, merit selection of safety structures, systems, or components or other controls to prevent or mitigate the hazard. Idaho State University, in collaboration with Idaho National Laboratory, has developed a portable and simple to use software application called SODA (Stochastic Objective Decision-Aide) that stochastically calculatesmore » the radiation dose distribution associated with hypothetical radiological material release scenarios. Rather than producing a point estimate of the dose, SODA produces a dose distribution result to allow a deeper understanding of the dose potential. SODA allows users to select the distribution type and parameter values for all of the input variables used to perform the dose calculation. Users can also specify custom distributions through a user defined distribution option. SODA then randomly samples each distribution input variable and calculates the overall resulting dose distribution. In cases where an input variable distribution is unknown, a traditional single point value can be used. SODA, developed using the MATLAB coding framework, has a graphical user interface and can be installed on both Windows and Mac computers. SODA is a standalone software application and does not require MATLAB to function. SODA provides improved risk understanding leading to better informed decision making associated with establishing nuclear facility material-at-risk limits and safety structure, system, or component selection. It is important to note that SODA does not replace or compete with codes such as MACCS or RSAC; rather it is viewed as an easy to use supplemental tool to help improve risk understanding and support better informed decisions. The SODA development project was funded through a grant from the DOE Nuclear Safety Research and Development Program.« less

Technology Trends: Buying a Computer.

ERIC Educational Resources Information Center

Strot, Melody; Benno, Mark

1997-01-01

Provides guidelines for buying computers for parents of gifted children. Steps for making decisions include deciding who will use the computer, deciding its purposes and what software packages will be used, determining current and future needs, setting a budget, and reviewing needs with salespersons and school-based technology specialists. (CR)

Care and Handling of Computer Magnetic Storage Media.

ERIC Educational Resources Information Center

Geller, Sidney B.

Intended for use by data processing installation managers, operating personnel, and technical staff, this publication provides a comprehensive set of care and handling guidelines for the physical/chemical preservation of computer magnetic storage media--principally computer magnetic tapes--and their stored data. Emphasis is placed on media…

A Psychophysical Protocol to Develop Ergonomic Recommendations for Sitting and Standing Workstations.

PubMed

Lin, Michael Y; Catalano, Paul; Dennerlein, Jack T

2016-06-01

The aim of this study was to determine user self-selected setup for both sitting and standing computer workstations and identify major differences. No current ergonomic setup guideline for standing computer workstations is available. Twenty adult participants completed four 45-min sessions of simulated office computer work with an adjustable sit-stand computer workstation. Placement and relative position of all workstation components, including a cordless mouse, a cordless keyboard, a height-adjustable desk, and a 22-inch monitor mounted on a mechanical-assisted arm were recorded during the four sessions, which alternated between sitting and standing for each session. Participants were interrupted four times within each session, and the workstation was "reset" to extreme locations. Participants were instructed to adjust the location to achieve the most comfortable arrangement and to make as many adjustments during the session to achieve this goal. Overall, users placed the keyboard closer to their body (sternum), set desk height lower than their elbow, and set the monitor lower relative to their eyes with a greater upward tilt while standing compared to sitting. During the 45-min sessions, the number of adjustments participants made became smaller and over the four sessions was consistent, suggesting the psychophysical protocol was effective and consistent. Users preferred different workstation setups for sitting and standing computer workstations. Therefore, future setup guidelines and principles for standing computer workstations may not be simply translated from those for sitting. These results can serve as the first step toward making recommendations to establish ergonomic guidelines for standing computer workstation arrangement. © 2016, Human Factors and Ergonomics Society.

Guidelines for the Clinical Use of Electronic Mail with Patients

PubMed Central

Kane, Beverley; Sands, Daniel Z.

1998-01-01

Guidelines regarding patient—provider electronic mail are presented. The intent is to provide guidance concerning computer-based communications between clinicians and patients within a contractual relationship in which the health-care provider has taken on an explicit measure of responsibility for the client's care. The guidelines address two interrelated aspects: effective interaction between the clinician and patient, and observance of medicolegal prudence. Recommendations for site-specific policy formulation are included. PMID:9452989

Message Design Guidelines For Screen-Based Programs.

ERIC Educational Resources Information Center

Rimar, G. I.

1996-01-01

Effective message design for screen-based computer or video instructional programs requires knowledge from many disciplines. Evaluates current conventions and suggests a new set of guidelines for screen-based designers. Discusses screen layout, highlighting and cueing, text font and style, text positioning, color, and graphical user interfaces for…

Design Guidelines for CAI Authoring Systems.

ERIC Educational Resources Information Center

Hunka, S.

1989-01-01

Discussion of the use of authoring systems for courseware development focuses on guidelines to be considered when designing authoring systems. Topics discussed include allowing a variety of instructional strategies; interaction with peripheral processes such as student records; the editing process; and human factors in computer interface design,…

16 CFR § 1115.26 - Guidelines and policies.

Code of Federal Regulations, 2013 CFR

2013-01-01

... REGULATIONS SUBSTANTIAL PRODUCT HAZARD REPORTS Guidelines and Requirements for Mandatory Recall Notices § 1115... minimize the use of highly technical or legal terminology. (3) A recall notice should be targeted and...; (ii) Computer, radio, television, or other electronic transmission or medium; (iii) Video news release...

Implementations of the CC'01 Human-Computer Interaction Guidelines Using Bloom's Taxonomy

ERIC Educational Resources Information Center

Manaris, Bill; Wainer, Michael; Kirkpatrick, Arthur E.; Stalvey, RoxAnn H.; Shannon, Christine; Leventhal, Laura; Barnes, Julie; Wright, John; Schafer, J. Ben; Sanders, Dean

2007-01-01

In today's technology-laden society human-computer interaction (HCI) is an important knowledge area for computer scientists and software engineers. This paper surveys existing approaches to incorporate HCI into computer science (CS) and such related issues as the perceived gap between the interests of the HCI community and the needs of CS…

Significant Developments in the Use of Computers in School Mathematics: A Sourcebook for Administrators, Teachers, and Teacher Educators.

ERIC Educational Resources Information Center

Moran, Thomas Patrick

This study provides a critical review of developments in the use of computer extended instruction (CEI), and practical guidelines for implementing a computer system in a school. The study examined special projects, proposals, recommendations, and position papers. Literature reviewed was synthesized under three broad headings: (1) computer hardware…

Time-efficient simulations of tight-binding electronic structures with Intel Xeon PhiTM many-core processors

NASA Astrophysics Data System (ADS)

Ryu, Hoon; Jeong, Yosang; Kang, Ji-Hoon; Cho, Kyu Nam

2016-12-01

Modelling of multi-million atomic semiconductor structures is important as it not only predicts properties of physically realizable novel materials, but can accelerate advanced device designs. This work elaborates a new Technology-Computer-Aided-Design (TCAD) tool for nanoelectronics modelling, which uses a sp3d5s∗ tight-binding approach to describe multi-million atomic structures, and simulate electronic structures with high performance computing (HPC), including atomic effects such as alloy and dopant disorders. Being named as Quantum simulation tool for Advanced Nanoscale Devices (Q-AND), the tool shows nice scalability on traditional multi-core HPC clusters implying the strong capability of large-scale electronic structure simulations, particularly with remarkable performance enhancement on latest clusters of Intel Xeon PhiTM coprocessors. A review of the recent modelling study conducted to understand an experimental work of highly phosphorus-doped silicon nanowires, is presented to demonstrate the utility of Q-AND. Having been developed via Intel Parallel Computing Center project, Q-AND will be open to public to establish a sound framework of nanoelectronics modelling with advanced HPC clusters of a many-core base. With details of the development methodology and exemplary study of dopant electronics, this work will present a practical guideline for TCAD development to researchers in the field of computational nanoelectronics.

Material Selection Guidelines to Limit Atomic Oxygen Effects on Spacecraft Surfaces

NASA Technical Reports Server (NTRS)

Dooling, D.; Finckenor, M. M.

1999-01-01

This report provides guidelines in selecting materials for satellites and space platforms, designed to operate within the Low-Earth orbit environment, which limit the effects of atomic oxygen interactions with spacecraft surfaces. This document should be treated as an introduction rather than a comprehensive guide since analytical and flight technologies continue to evolve, flight experiments are conducted as primary or piggyback opportunities arise, and our understanding of materials interactions and protection methods grows. The reader is urged to consult recent literature and current web sites containing information about research and flight results.

A context-adaptable approach to clinical guidelines.

PubMed

Terenziani, Paolo; Montani, Stefania; Bottrighi, Alessio; Torchio, Mauro; Molino, Gianpaolo; Correndo, Gianluca

2004-01-01

One of the most relevant obstacles to the use and dissemination of clinical guidelines is the gap between the generality of guidelines (as defined, e.g., by physicians' committees) and the peculiarities of the specific context of application. In particular, general guidelines do not take into account the fact that the tools needed for laboratory and instrumental investigations might be unavailable at a given hospital. Moreover, computer-based guideline managers must also be integrated with the Hospital Information System (HIS), and usually different DBMS are adopted by different hospitals. The GLARE (Guideline Acquisition, Representation and Execution) system addresses these issues by providing a facility for automatic resource-based adaptation of guidelines to the specific context of application, and by providing a modular architecture in which only limited and well-localised changes are needed to integrate the system with the HIS at hand.

The virtual asthma guideline e-learning program: learning effectiveness and user satisfaction.

PubMed

Kang, Sung-Yoon; Kim, Sae-Hoon; Kwon, Yong-Eun; Kim, Tae-Bum; Park, Hye-Kyung; Park, Heung-Woo; Chang, Yoon-Seok; Jee, Young-Koo; Moon, Hee-Bom; Min, Kyung-Up; Cho, Sang-Heon

2018-05-01

Effective educational tools are important for increasing adherence to asthma guidelines and clinical improvement of asthma patients. We developed a computer-based interactive education program for asthma guideline named the Virtual Learning Center for Asthma Management (VLCAM). We evaluated the usefulness of program in terms of its effects on user awareness of asthma guideline and level of satisfaction. Physicians-in-training at tertiary hospitals in Korea were enrolled in a cross-sectional questionnaire survey. The e-learning program on asthma guideline was conducted over a 2-week period. We investigated changes in the awareness of asthma guideline using 35-item self-administered questionnaire aiming at assessing physicians' knowledge, attitude, and practice. Satisfaction with the program was scored on 4-point Likert scales. A total of 158 physicians-in-training at six tertiary hospitals completed the survey. Compared with baseline, the overall awareness obtained from the scores of knowledge, attitude, and practice was improved significantly. Participants were satisfied with the VLCAM program in the following aspects: helpfulness, convenience, motivation, effectiveness, physicians' confidence, improvement of asthma management, and willingness to recommend. All items in user satisfaction questionnaires received high scores over 3 points. Moreover, the problem-based learning with a virtual patient received the highest user satisfaction among all parts of the program. Our computer-based e-learning program is useful for improving awareness of asthma management. It could improve adherence to asthma guidelines and enhance the quality of asthma care.

Assessment of the magnetic field exposure due to the battery current of digital mobile phones.

PubMed

Jokela, Kari; Puranen, Lauri; Sihvonen, Ari-Pekka

2004-01-01

Hand-held digital mobile phones generate pulsed magnetic fields associated with the battery current. The peak value and the waveform of the battery current were measured for seven different models of digital mobile phones, and the results were applied to compute approximately the magnetic flux density and induced currents in the phone-user's head. A simple circular loop model was used for the magnetic field source and a homogeneous sphere consisting of average brain tissue equivalent material simulated the head. The broadband magnetic flux density and the maximal induced current density were compared with the guidelines of ICNIRP using two various approaches. In the first approach the relative exposure was determined separately at each frequency and the exposure ratios were summed to obtain the total exposure (multiple-frequency rule). In the second approach the waveform was weighted in the time domain with a simple low-pass RC filter and the peak value was divided by a peak limit, both derived from the guidelines (weighted peak approach). With the maximum transmitting power (2 W) the measured peak current varied from 1 to 2.7 A. The ICNIRP exposure ratio based on the current density varied from 0.04 to 0.14 for the weighted peak approach and from 0.08 to 0.27 for the multiple-frequency rule. The latter values are considerably greater than the corresponding exposure ratios 0.005 (min) to 0.013 (max) obtained by applying the evaluation based on frequency components presented by the new IEEE standard. Hence, the exposure does not seem to exceed the guidelines. The computed peak magnetic flux density exceeded substantially the derived peak reference level of ICNIRP, but it should be noted that in a near-field exposure the external field strengths are not valid indicators of exposure. Currently, no biological data exist to give a reason for concern about the health effects of magnetic field pulses from mobile phones.

Computers as Teaching Tools: Some Examples and Guidelines.

ERIC Educational Resources Information Center

Beins, Bernard C.

The use of computers in the classroom has been touted as an important innovation in education. This article features some recently developed software for use in teaching psychology and different approaches to classroom computer use. Uses of software packages for psychological research designs are included as are applications and limitations of…

Recent Evolution of the Introductory Curriculum in Computing.

ERIC Educational Resources Information Center

Tucker, Allen B.; Garnick, David K.

1991-01-01

Traces the evolution of introductory computing courses for undergraduates based on the Association for Computing Machinery (ACM) guidelines published in "Curriculum 78." Changes in the curricula are described, including the role of discrete mathematics and theory; and the need for a broader model for designing introductory courses is…

Central Computational Facility CCF communications subsystem options

NASA Technical Reports Server (NTRS)

Hennigan, K. B.

1979-01-01

A MITRE study which investigated the communication options available to support both the remaining Central Computational Facility (CCF) computer systems and the proposed U1108 replacements is presented. The facilities utilized to link the remote user terminals with the CCF were analyzed and guidelines to provide more efficient communications were established.

A User Assessment of Workspaces in Selected Music Education Computer Laboratories.

ERIC Educational Resources Information Center

Badolato, Michael Jeremy

A study of 120 students selected from the user populations of four music education computer laboratories was conducted to determine the applicability of current ergonomic and environmental design guidelines in satisfying the needs of users of educational computing workspaces. Eleven categories of workspace factors were organized into a…

A Computer-Based Private Pilot (Airplane) Certification Exam: A First Step Toward Nation-Wide Computer-Administration of FAA Certification Exams.

ERIC Educational Resources Information Center

Anderson, Richard I.; Trollip, Stanley R.

1982-01-01

To assess the feasibility of computer-assisted Federal Aviation Administration certification examinations, a system for administering the Private Pilot Certification Examination was implemented using PLATO. Characteristics, reactions, and guidelines for use of the test are included. (Author/JJD)

78 FR 60726 - Hazardous Materials Regulations: Penalty Guidelines

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-02

..., Radioactive Materials, Compressed Gases in cylinders; Packaging Manufacturers, Drum Manufacturers and... Administrative practices and procedure, Hazardous materials transportation, Packaging and containers, Penalties... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part...

Guidelines for Writing (or Rewriting) Manuals for Instructional Software.

ERIC Educational Resources Information Center

Litchfield, Brenda C.

1990-01-01

Discusses the need for adequate student user manuals for computer software and presents guidelines to help teachers develop these manuals. The sections that a student manual should contain are outlined, including objectives, pretests and posttests for self-evaluation, and worksheets; and examples are given for further clarification. (LRW)

From guideline modeling to guideline execution: defining guideline-based decision-support services.

PubMed Central

Tu, S. W.; Musen, M. A.

2000-01-01

We describe our task-based approach to defining the guideline-based decision-support services that the EON system provides. We categorize uses of guidelines in patient-specific decision support into a set of generic tasks--making of decisions, specification of work to be performed, interpretation of data, setting of goals, and issuance of alert and reminders--that can be solved using various techniques. Our model includes constructs required for representing the knowledge used by these techniques. These constructs form a toolkit from which developers can select modeling solutions for guideline task. Based on the tasks and the guideline model, we define a guideline-execution architecture and a model of interactions between a decision-support server and clients that invoke services provided by the server. These services use generic interfaces derived from guideline tasks and their associated modeling constructs. We describe two implementations of these decision-support services and discuss how this work can be generalized. We argue that a well-defined specification of guideline-based decision-support services will facilitate sharing of tools that implement computable clinical guidelines. PMID:11080007

Understanding transferable supply chain lessons and practices to a "high-tech" industry using guidelines from a primary sector industry: a case study in the food industry supply chain.

PubMed

Coronado Mondragon, Adrian E; Coronado Mondragon, Christian E; Coronado, Etienne S

2015-01-01

Flexibility and innovation at creating shapes, adapting processes, and modifying materials characterize composites materials, a "high-tech" industry. However, the absence of standard manufacturing processes and the selection of materials with defined properties hinder the configuration of the composites materials supply chain. An interesting alternative for a "high-tech" industry such as composite materials would be to review supply chain lessons and practices in "low-tech" industries such as food. The main motivation of this study is to identify lessons and practices that comprise innovations in the supply chain of a firm in a perceived "low-tech" industry that can be used to provide guidelines in the design of the supply chain of a "high-tech" industry, in this case composite materials. This work uses the case study/site visit with analogy methodology to collect data from a Spanish leading producer of fresh fruit juice which is sold in major European markets and makes use of a cold chain. The study highlights supply base management and visibility/traceability as two elements of the supply chain in a "low-tech" industry that can provide guidelines that can be used in the configuration of the supply chain of the composite materials industry.

Guidelines for development of NASA (National Aeronautics and Space Administration) computer security training programs

NASA Technical Reports Server (NTRS)

Tompkins, F. G.

1983-01-01

The report presents guidance for the NASA Computer Security Program Manager and the NASA Center Computer Security Officials as they develop training requirements and implement computer security training programs. NASA audiences are categorized based on the computer security knowledge required to accomplish identified job functions. Training requirements, in terms of training subject areas, are presented for both computer security program management personnel and computer resource providers and users. Sources of computer security training are identified.

Computer-Based Access to Patient Care Guidelines

PubMed Central

Oliver, Diane E.; Estey, Greg; Ford, Penny; Burke, Sheila M.; Teplick, Richard S.; Zielstorff, Rita D.; Barnett, G. Octo

1990-01-01

As health care becomes more complex and expensive, interest in the potential benefits of developing and implementing patient care guidelines has emerged. We propose that a hypertext-based system designed to deal with patient-specific problems can provide a valuable method of access to such guidelines. Because intensive care medicine is one area which has become extraordinarily complex in recent years, we have chosen this as an area in which the need exists for readily accessible expertise. More specifically, in this project we are focusing on the development and implementation of guidelines for troubleshooting problems associated with the of a pulmonary artery catheter.

Coupling computer-interpretable guidelines with a drug-database through a web-based system – The PRESGUID project

PubMed Central

Dufour, Jean-Charles; Fieschi, Dominique; Fieschi, Marius

2004-01-01

Background Clinical Practice Guidelines (CPGs) available today are not extensively used due to lack of proper integration into clinical settings, knowledge-related information resources, and lack of decision support at the point of care in a particular clinical context. Objective The PRESGUID project (PREScription and GUIDelines) aims to improve the assistance provided by guidelines. The project proposes an online service enabling physicians to consult computerized CPGs linked to drug databases for easier integration into the healthcare process. Methods Computable CPGs are structured as decision trees and coded in XML format. Recommendations related to drug classes are tagged with ATC codes. We use a mapping module to enhance computerized guidelines coupling with a drug database, which contains detailed information about each usable specific medication. In this way, therapeutic recommendations are backed up with current and up-to-date information from the database. Results Two authoritative CPGs, originally diffused as static textual documents, have been implemented to validate the computerization process and to illustrate the usefulness of the resulting automated CPGs and their coupling with a drug database. We discuss the advantages of this approach for practitioners and the implications for both guideline developers and drug database providers. Other CPGs will be implemented and evaluated in real conditions by clinicians working in different health institutions. PMID:15053828

Guidelines and standard procedures for continuous water-quality monitors: Station operation, record computation, and data reporting

USGS Publications Warehouse

Wagner, Richard J.; Boulger, Robert W.; Oblinger, Carolyn J.; Smith, Brett A.

2006-01-01

The U.S. Geological Survey uses continuous water-quality monitors to assess the quality of the Nation's surface water. A common monitoring-system configuration for water-quality data collection is the four-parameter monitoring system, which collects temperature, specific conductance, dissolved oxygen, and pH data. Such systems also can be configured to measure other properties, such as turbidity or fluorescence. Data from sensors can be used in conjunction with chemical analyses of samples to estimate chemical loads. The sensors that are used to measure water-quality field parameters require careful field observation, cleaning, and calibration procedures, as well as thorough procedures for the computation and publication of final records. This report provides guidelines for site- and monitor-selection considerations; sensor inspection and calibration methods; field procedures; data evaluation, correction, and computation; and record-review and data-reporting processes, which supersede the guidelines presented previously in U.S. Geological Survey Water-Resources Investigations Report WRIR 00-4252. These procedures have evolved over the past three decades, and the process continues to evolve with newer technologies.

The 2013 ACC/AHA cardiovascular prevention guidelines improve alignment of statin therapy with coronary atherosclerosis as detected by coronary computed tomography angiography.

PubMed

Pursnani, Amit; Mayrhofer, Thomas; Ferencik, Maros; Hoffmann, Udo

2014-11-01

The recently released 2013 ACC/AHA guidelines for management of blood cholesterol have substantially increased the number of adults who are eligible for preventive statin therapy. We sought to determine whether eligibility for statin therapy as determined by the 2013 ACC/AHA guideline recommendation is better aligned with the actual presence of coronary artery disease (CAD) as detected by coronary CT angiography (CCTA) when compared to prior guidelines including the 2004 NCEP ATP III and 2011 ESC/EAS guidelines. In this secondary analysis of the prospective observational ROMICAT I (Rule Out Myocardial Infarction with Computer Assisted Tomography) cohort study, we included all men and women aged 40-79 years presenting with acute chest pain but not diagnosed with acute coronary syndrome nor on admission statin. Based on risk factor assessment and lipid data, we determined guideline-based eligibility for statin therapy by the 2013 ACC/AHA, the 2004 NCEP ATP III, and the 2011 ESC/EAS guidelines. We determined the presence and severity of CAD as detected by CCTA. The 2013 ACC/AHA algorithm identified nearly twice as many individuals as eligible for statins (n = 77/189; 41%) as compared to the 2004 ATP III criteria: (n = 41/189; 22%), (p < .0001) In addition, the 2013 ACC/AHA guidelines were more sensitive for treatment of CCTA-detected CAD than the 2004 ATP III guidelines [53.4% (42.5-64.1) vs 27.3% (18.3-37.8), p < .001] and the 2011 ESC/EAE guidelines [53.4% (42.5-64.1) vs 34.1% (24.3-45.0), p < .001]. However, the specificity of these guidelines was modestly reduced compared to the 2004 ATP III guidelines [70.3 (60.4-79.0) vs 83.2 (74.4-89.9), p < .001] and the 2011 ESC/EAE guidelines [70.3 (60.4-79.0) vs 86.1 (77.8-92.2), p < .001], suggesting increased treatment of subjects without CCTA-detected CAD. Overall, the 2013 ACC/AHA guidelines are more sensitive to identify patients who have CAD detected by CCTA eligible for statin therapy as compared with prior guidelines, with an acceptable trade-off in specificity for recommending statin therapy in those without CAD. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

The 2013 ACC/AHA Cardiovascular Prevention Guidelines Improve Alignment of Statin Therapy with Coronary Atherosclerosis As Detected by Coronary Computed Tomography Angiography

PubMed Central

Pursnani, Amit; Mayrhofer, Thomas; Ferencik, Maros; Hoffmann, Udo

2018-01-01

The recently released 2013 ACC/AHA guidelines for management of blood cholesterol have substantially increased the number of adults who are eligible for preventive statin therapy. We sought to determine whether eligibility for statin therapy as determined by the 2013 ACC/AHA guideline recommendation is better aligned with the actual presence of coronary artery disease (CAD) as detected by coronary CT angiography (CCTA) when compared to prior guidelines including the 2004 NCEP ATP III and 2011 ESC/EAS guidelines. In this secondary analysis of the prospective observational ROMICAT I (Rule Out Myocardial Infarction with Computer Assisted Tomography) cohort study, we included all men and women aged 40–79 years presenting with acute chest pain but not diagnosed with acute coronary syndrome nor on admission statin. Based on risk factor assessment and lipid data, we determined guideline-based eligibility for statin therapy by the 2013 ACC/AHA, the 2004 NCEP ATP II, and the 2011 ESC/EAS guidelines. We determined the presence and severity of CAD as detected by CCTA. The 2013 ACC/AHA algorithm identified nearly twice as many individuals as eligible for statins (n=77/189; 41%) as compared to the 2004 ATPIII criteria: (n=41/189; 22%), (P<.0001) In addition, the 2013 ACC/AHA guidelines were more sensitive for treatment of CCTA-detected CAD than the 2004 ATP III guidelines [53.4% (42.5–64.1) vs 27.3% (18.3–37.8), p<.001] and the 2011 ESC/EAE guidelines [53.4% (42.5–64.1) vs 34.1% (24.3–45.0), p<.001]. However, the specificity of these guidelines was modestly reduced compared to the 2004 ATP III guidelines [70.3 (60.4–79.0) vs 83.2 (74.4–89.9), p<.001] and the 2011 ESC/EAE guidelines [70.3 (60.4–79.0) vs 86.1 (77.8–92.2), p<.001], suggesting increased treatment of subjects without CCTA-detected CAD. Overall, the 2013 ACC/AHA guidelines are more sensitive to identify patients who have CAD detected by CCTA eligible for statin therapy as compared with prior guidelines, with an acceptable trade-off in specificity for recommending statin therapy in those without CAD. PMID:25299966

Review of achievements of the OECD Working Party on Manufactured Nanomaterials' Testing and Assessment Programme. From exploratory testing to test guidelines.

PubMed

Rasmussen, Kirsten; González, Mar; Kearns, Peter; Sintes, Juan Riego; Rossi, François; Sayre, Phil

2016-02-01

This paper charts the almost ten years of history of OECD's work on nanosafety, during which the programme of the OECD on the Testing and Assessment of Manufactured Nanomaterials covered the testing of eleven nanomaterials for about 59 end-points addressing physical-chemical properties, mammalian and environmental toxicity, environmental fate and material safety. An overview of the materials tested, the test methods applied and the discussions regarding the applicability of the OECD test guidelines, which are recognised methods for regulatory testing of chemicals, are given. The results indicate that many existing OECD test guidelines are suitable for nanomaterials and consequently, hazard data collected using such guidelines will fall under OECD's system of Mutual Acceptance of Data (MAD) which is a legally binding instrument to facilitate the international acceptance of information for the regulatory safety assessment of chemicals. At the same time, some OECD test guidelines and guidance documents need to be adapted to address nanomaterials while new test guidelines and guidance documents may be needed to address endpoints that are more relevant to nanomaterials. This paper presents examples of areas where test guidelines or guidance for nanomaterials are under development. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

30 CFR 1210.104 - Must I submit these production reports electronically?

Code of Federal Regulations, 2011 CFR

2011-07-01

... (EDI)—The direct computer-to-computer interchange of data using standards set forth by the X12 American... be generated from a reporter's system application. (c) Refer to our electronic reporting guidelines...

Training Strategy: Computer Education for Teachers in Uruguay.

ERIC Educational Resources Information Center

Grunberg, Jorge

1987-01-01

Described is the Alfa Project in Uruguay, designed to integrate computer education into secondary schools through teacher-training. Both teacher-users and teacher-authors were considered. Course objectives, curriculum content, and teaching guidelines are presented. (MNS)

Effective groundwater model calibration: With analysis of data, sensitivities, predictions, and uncertainty

USGS Publications Warehouse

Hill, Mary C.; Tiedeman, Claire

2007-01-01

Methods and guidelines for developing and using mathematical modelsTurn to Effective Groundwater Model Calibration for a set of methods and guidelines that can help produce more accurate and transparent mathematical models. The models can represent groundwater flow and transport and other natural and engineered systems. Use this book and its extensive exercises to learn methods to fully exploit the data on hand, maximize the model's potential, and troubleshoot any problems that arise. Use the methods to perform:Sensitivity analysis to evaluate the information content of dataData assessment to identify (a) existing measurements that dominate model development and predictions and (b) potential measurements likely to improve the reliability of predictionsCalibration to develop models that are consistent with the data in an optimal mannerUncertainty evaluation to quantify and communicate errors in simulated results that are often used to make important societal decisionsMost of the methods are based on linear and nonlinear regression theory.Fourteen guidelines show the reader how to use the methods advantageously in practical situations.Exercises focus on a groundwater flow system and management problem, enabling readers to apply all the methods presented in the text. The exercises can be completed using the material provided in the book, or as hands-on computer exercises using instructions and files available on the text's accompanying Web site.Throughout the book, the authors stress the need for valid statistical concepts and easily understood presentation methods required to achieve well-tested, transparent models. Most of the examples and all of the exercises focus on simulating groundwater systems; other examples come from surface-water hydrology and geophysics.The methods and guidelines in the text are broadly applicable and can be used by students, researchers, and engineers to simulate many kinds systems.

GEM at 10: a decade's experience with the Guideline Elements Model.

PubMed

Hajizadeh, Negin; Kashyap, Nitu; Michel, George; Shiffman, Richard N

2011-01-01

The Guideline Elements Model (GEM) was developed in 2000 to organize the information contained in clinical practice guidelines using XML and to represent guideline content in a form that can be understood by human readers and processed by computers. In this work, we systematically reviewed the literature to better understand how GEM was being used, potential barriers to its use, and suggestions for improvement. Fifty external and twelve internally produced publications were identified and analyzed. GEM was used most commonly for modeling and ontology creation. Other investigators applied GEM for knowledge extraction and data mining, for clinical decision support for guideline generation. The GEM Cutter software-used to markup guidelines for translation into XML- has been downloaded 563 times since 2000. Although many investigators found GEM to be valuable, others critiqued its failure to clarify guideline semantics, difficulties in markup, and the fact that GEM files are not usually executable.

Consensus Contouring Guidelines for Postoperative Stereotactic Body Radiation Therapy for Metastatic Solid Tumor Malignancies to the Spine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Redmond, Kristin J., E-mail: kjanson3@jhmi.edu; Robertson, Scott; Lo, Simon S.

Purpose: To develop consensus contouring guidelines for postoperative stereotactic body radiation therapy (SBRT) for spinal metastases. Methods and Materials: Ten spine SBRT specialists representing 10 international centers independently contoured the clinical target volume (CTV), planning target volume (PTV), spinal cord, and spinal cord planning organ at risk volume (PRV) for 10 representative clinical scenarios in postoperative spine SBRT for metastatic solid tumor malignancies. Contours were imported into the Computational Environment for Radiotherapy Research. Agreement between physicians was calculated with an expectation minimization algorithm using simultaneous truth and performance level estimation with κ statistics. Target volume definition guidelines were established by finding optimizedmore » confidence level consensus contours using histogram agreement analyses. Results: Nine expert radiation oncologists and 1 neurosurgeon completed contours for all 10 cases. The mean sensitivity and specificity were 0.79 (range, 0.71-0.89) and 0.94 (range, 0.90-0.99) for the CTV and 0.79 (range, 0.70-0.95) and 0.92 (range, 0.87-0.99) for the PTV), respectively. Mean κ agreement, which demonstrates the probability that contours agree by chance alone, was 0.58 (range, 0.43-0.70) for CTV and 0.58 (range, 0.37-0.76) for PTV (P<.001 for all cases). Optimized consensus contours were established for all patients with 80% confidence interval. Recommendations for CTV include treatment of the entire preoperative extent of bony and epidural disease, plus immediately adjacent bony anatomic compartments at risk of microscopic disease extension. In particular, a “donut-shaped” CTV was consistently applied in cases of preoperative circumferential epidural extension, regardless of extent of residual epidural extension. Otherwise more conformal anatomic-based CTVs were determined and described. Spinal instrumentation was consistently excluded from the CTV. Conclusions: We provide consensus contouring guidelines for common scenarios in postoperative SBRT for spinal metastases. These consensus guidelines are subject to clinical validation.« less

Treatment Planning Constraints to Avoid Xerostomia in Head-and-Neck Radiotherapy: An Independent Test of QUANTEC Criteria Using a Prospectively Collected Dataset

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moiseenko, Vitali, E-mail: vmoiseenko@bccancer.bc.ca; Wu, Jonn; Hovan, Allan

2012-03-01

Purpose: The severe reduction of salivary function (xerostomia) is a common complication after radiation therapy for head-and-neck cancer. Consequently, guidelines to ensure adequate function based on parotid gland tolerance dose-volume parameters have been suggested by the QUANTEC group and by Ortholan et al. We perform a validation test of these guidelines against a prospectively collected dataset and compared with a previously published dataset. Methods and Materials: Whole-mouth stimulated salivary flow data from 66 head-and-neck cancer patients treated with radiotherapy at the British Columbia Cancer Agency (BCCA) were measured, and treatment planning data were abstracted. Flow measurements were collected from 50more » patients at 3 months, and 60 patients at 12-month follow-up. Previously published data from a second institution, Washington University in St. Louis (WUSTL), were used for comparison. A logistic model was used to describe the incidence of Grade 4 xerostomia as a function of the mean dose of the spared parotid gland. The rate of correctly predicting the lack of xerostomia (negative predictive value [NPV]) was computed for both the QUANTEC constraints and Ortholan et al. recommendation to constrain the total volume of both glands receiving more than 40 Gy to less than 33%. Results: Both datasets showed a rate of xerostomia of less than 20% when the mean dose to the least-irradiated parotid gland is kept to less than 20 Gy. Logistic model parameters for the incidence of xerostomia at 12 months after therapy, based on the least-irradiated gland, were D{sub 50} = 32.4 Gy and and {gamma} = 0.97. NPVs for QUANTEC guideline were 94% (BCCA data), and 90% (WUSTL data). For Ortholan et al. guideline NPVs were 85% (BCCA) and 86% (WUSTL). Conclusion: These data confirm that the QUANTEC guideline effectively avoids xerostomia, and this is somewhat more effective than constraints on the volume receiving more than 40 Gy.« less

Treatment planning constraints to avoid xerostomia in head and neck radiotherapy: an independent test of QUANTEC criteria using a prospectively collected dataset

PubMed Central

Moiseenko, Vitali; Wu, Jonn; Hovan, Allan; Saleh, Ziad; Apte, Aditya; Deasy, Joseph O.; Harrow, Stephen; Rabuka, Carman; Muggli, Adam; Thompson, Anna

2011-01-01

Purpose The severe reduction of salivary function (xerostomia) is a common complication following radiation therapy for head and neck cancer. Consequently, guidelines to ensure adequate function based on parotid gland tolerance dose-volume parameters have been suggested by the QUANTEC group (1) and by Ortholan et al. (2). We perform a validation test of these guidelines against a prospectively collected dataset and compared to a previously published dataset. Method and Materials Whole-mouth stimulated salivary flow data from 66 head and neck cancer patients treated with radiotherapy at the British Columbia Cancer Agency (BCCA) were measured, and treatment planning data were abstracted. Flow measurements were collected from 50 patients at 3 months, and 60 patients at 12 month follow-up. Previously published data from a second institution (WUSTL) were used for comparison. A logistic model was used to describe the incidence of grade 4 xerostomia as a function of the mean dose of the spared parotid gland. The rate of correctly predicting the lack of xerostomia (negative predictive value, NPV) was computed for both the QUANTEC constraints and Ortholan et al. (2) recommendation to constrain the total volume of both glands receiving more than 40 Gy to less than 33%. Results Both data sets showed a rate of xerostomia < 20 % when the mean dose to the least-irradiated parotid gland is kept below 20 Gy. Logistic model parameters for the incidence of xerostomia at 12 months after therapy, based on the least-irradiated gland, were D50=32.4 Gy and and γ=0.97. NPVs for QUANTEC guideline were 94% (BCCA data), 90% (WUSTL data). For Ortholan et al. (2) guideline NPVs were 85% (BCCA), and 86% (WUSTL). Conclusion This confirms that the QUANTEC guideline effectively avoids xerostomia, and this is somewhat more effective than constraints on the volume receiving more than 40 Gy. PMID:21640505

Developing and Evaluating Patient Education Materials.

ERIC Educational Resources Information Center

Monsivais, Diane; Reynolds, Audree

2003-01-01

Discusses the rationale for nurse involvement in the development of patient education materials. Presents guidelines for evaluating existing material, including print and web resources, for credibility and readability. Makes recommendations for rewriting material at an easier-to-read level. (SK)

Institute for Computer Sciences and Technology. Annual Report FY 1986.

ERIC Educational Resources Information Center

National Bureau of Standards (DOC), Washington, DC. Inst. for Computer Sciences and Technology.

Activities of the Institute for Computer Sciences and Technology (ICST) within the U.S. Department of Commerce during fiscal year 1986 are described in this annual report, which summarizes research and publications by ICST in the following areas: (1) standards and guidelines for computer security, including encryption and message authentication…

Design of a Performance-Responsive Drill and Practice Algorithm for Computer-Based Training.

ERIC Educational Resources Information Center

Vazquez-Abad, Jesus; LaFleur, Marc

1990-01-01

Reviews criticisms of the use of drill and practice programs in educational computing and describes potentials for its use in instruction. Topics discussed include guidelines for developing computer-based drill and practice; scripted training courseware; item format design; item bank design; and a performance-responsive algorithm for item…

Computational Modeling of Tires

NASA Technical Reports Server (NTRS)

Noor, Ahmed K. (Compiler); Tanner, John A. (Compiler)

1995-01-01

This document contains presentations and discussions from the joint UVA/NASA Workshop on Computational Modeling of Tires. The workshop attendees represented NASA, the Army and Air force, tire companies, commercial software developers, and academia. The workshop objectives were to assess the state of technology in the computational modeling of tires and to provide guidelines for future research.

Computer Software: Copyright and Licensing Considerations for Schools and Libraries. ERIC Digest.

ERIC Educational Resources Information Center

Reed, Mary Hutchings

This digest notes that the terms and conditions of computer software package license agreements control the use of software in schools and libraries, and examines the implications of computer software license agreements for classroom use and for library lending policies. Guidelines are provided for interpreting the Copyright Act, and insuring the…

Guidelines for Equal Treatment of the Sexes in McGraw-Hill Book Company Publications.

ERIC Educational Resources Information Center

McGraw-Hill Book Co., New York, NY.

Intended primarily for use in writing and editing teaching materials, reference works, and nonfiction works in general, these guidelines have been compiled to alert authors and McGraw-Hill Book Company staff members both to the problems of sex discrimination and to various solutions. In addition, the guidelines reveal ways in which males and…

[Formulation of guidelines for microscopic endodontics suitable for the situation of China].

PubMed

Ling, J Q

2016-08-01

In order to promote the use of dental operating microscope in endodontics, Society of Cariology and Endodontology of Chinese Stomatological Association formulated these guidelines, after extensive consultation with related authorities and careful reference to the available published materials and literatures. It is hoped that these guidelines will be useful for dental practitioners embarking on microscopic endodontics.

Budgeting for Quality and Survival in the 21st Century--Guidelines for Directors.

ERIC Educational Resources Information Center

Whitehead, R. Ann

2003-01-01

Offers practical guidelines for directors of child care centers on creating a budget and managing the center's finances. Suggests ways to establish priorities, establish a tuition rate, compute projected monthly enrollment and income, budget variable and fixed expenses, create the final budget, and monitor financial statements. (JPB)

Information Technology Policies. SPEC Kit 218.

ERIC Educational Resources Information Center

Leung, Shirley; Bisom, Diane

The objectives of this survey were: to gather information on the development of institutional information technology policies and guidelines for responsible computing and use of electronic information; to identify the scope of such policies and guidelines; and to determine the role of the library in the development and/or use of the policies and…

40 CFR 411.32 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Storage Piles Runoff Subcategory § 411.32 Effluent limitations guidelines representing the degree of... facilities designed, constructed and operated to treat the volume of runoff from materials storage piles...

Training Guidelines: Bricks Operatives.

ERIC Educational Resources Information Center

Ceramics, Glass, and Mineral Products Industry Training Board, Harrow (England).

This manual offers guidelines for training of personnel involved in the manufacture of bricks, including employment practices; handling and preparation of raw materials; making, drying, firing, sorting, packing, and loading of bricks. A major emphasis is placed on industrial safety. (MF)

Revised American Thyroid Association guidelines for the management of medullary thyroid carcinoma.

PubMed

Wells, Samuel A; Asa, Sylvia L; Dralle, Henning; Elisei, Rossella; Evans, Douglas B; Gagel, Robert F; Lee, Nancy; Machens, Andreas; Moley, Jeffrey F; Pacini, Furio; Raue, Friedhelm; Frank-Raue, Karin; Robinson, Bruce; Rosenthal, M Sara; Santoro, Massimo; Schlumberger, Martin; Shah, Manisha; Waguespack, Steven G

2015-06-01

The American Thyroid Association appointed a Task Force of experts to revise the original Medullary Thyroid Carcinoma: Management Guidelines of the American Thyroid Association. The Task Force identified relevant articles using a systematic PubMed search, supplemented with additional published materials, and then created evidence-based recommendations, which were set in categories using criteria adapted from the United States Preventive Services Task Force Agency for Healthcare Research and Quality. The original guidelines provided abundant source material and an excellent organizational structure that served as the basis for the current revised document. The revised guidelines are focused primarily on the diagnosis and treatment of patients with sporadic medullary thyroid carcinoma (MTC) and hereditary MTC. The Task Force developed 67 evidence-based recommendations to assist clinicians in the care of patients with MTC. The Task Force considers the recommendations to represent current, rational, and optimal medical practice.

Revised American Thyroid Association Guidelines for the Management of Medullary Thyroid Carcinoma

PubMed Central

Asa, Sylvia L.; Dralle, Henning; Elisei, Rossella; Evans, Douglas B.; Gagel, Robert F.; Lee, Nancy; Machens, Andreas; Moley, Jeffrey F.; Pacini, Furio; Raue, Friedhelm; Frank-Raue, Karin; Robinson, Bruce; Rosenthal, M. Sara; Santoro, Massimo; Schlumberger, Martin; Shah, Manisha; Waguespack, Steven G.

2015-01-01

Introduction: The American Thyroid Association appointed a Task Force of experts to revise the original Medullary Thyroid Carcinoma: Management Guidelines of the American Thyroid Association. Methods: The Task Force identified relevant articles using a systematic PubMed search, supplemented with additional published materials, and then created evidence-based recommendations, which were set in categories using criteria adapted from the United States Preventive Services Task Force Agency for Healthcare Research and Quality. The original guidelines provided abundant source material and an excellent organizational structure that served as the basis for the current revised document. Results: The revised guidelines are focused primarily on the diagnosis and treatment of patients with sporadic medullary thyroid carcinoma (MTC) and hereditary MTC. Conclusions: The Task Force developed 67 evidence-based recommendations to assist clinicians in the care of patients with MTC. The Task Force considers the recommendations to represent current, rational, and optimal medical practice. PMID:25810047

Patient and public attitudes to and awareness of clinical practice guidelines: a systematic review with thematic and narrative syntheses

PubMed Central

2014-01-01

Background Clinical practice guidelines are typically written for healthcare providers but there is increasing interest in producing versions for the public, patients and carers. The main objective of this review is to identify and synthesise evidence of the public’s attitudes towards clinical practice guidelines and evidence-based recommendations written for providers or the public, together with their awareness of guidelines. Methods We included quantitative and qualitative studies of any design reporting on public, patient (and their carers) attitudes and awareness of guidelines written for providers or patients/public. We searched electronic databases including MEDLINE, PSYCHINFO, ERIC, ASSIA and the Cochrane Library from 2000 to 2012. We also searched relevant websites, reviewed citations and contacted experts in the field. At least two authors independently screened, abstracted data and assessed the quality of studies. We conducted a thematic analysis of first and second order themes and performed a separate narrative synthesis of patient and public awareness of guidelines. Results We reviewed 5415 records and included 26 studies (10 qualitative studies, 13 cross sectional and 3 randomised controlled trials) involving 24 887 individuals. Studies were mostly good to fair quality. The thematic analysis resulted in four overarching themes: Applicability of guidelines; Purpose of guidelines for patient; Purpose of guidelines for health care system and physician; and Properties of guidelines. Overall, participants had mixed attitudes towards guidelines; some participants found them empowering but many saw them as a way of rationing care. Patients were also concerned that the information may not apply to their own health care situations. Awareness of guidelines ranged from 0-79%, with greater awareness in participants surveyed on national guideline websites. Conclusion There are many factors, not only formatting, that may affect the uptake and use of guideline-derived material by the public. Producers need to make clear how the information is relevant to the reader and how it can be used to make healthcare improvements although there were problems with data quality. Awareness of guidelines is generally low and guideline producers cannot assume that the public has a more positive perception of their material than of alternative sources of health information. PMID:25064372

GREEN OAK AS A SUSTAINABLE BUILDING MATERIAL

EPA Science Inventory

Technical documentation necessary for a project demonstrating the viability of green oak as a contemporary structural material. These will include material grading guidelines, mechanical testing, architectural construction documents and details, specifications, engineering cal...

Use of handheld computers in clinical practice: a systematic review.

PubMed

Mickan, Sharon; Atherton, Helen; Roberts, Nia Wyn; Heneghan, Carl; Tilson, Julie K

2014-07-06

Many healthcare professionals use smartphones and tablets to inform patient care. Contemporary research suggests that handheld computers may support aspects of clinical diagnosis and management. This systematic review was designed to synthesise high quality evidence to answer the question; Does healthcare professionals' use of handheld computers improve their access to information and support clinical decision making at the point of care? A detailed search was conducted using Cochrane, MEDLINE, EMBASE, PsycINFO, Science and Social Science Citation Indices since 2001. Interventions promoting healthcare professionals seeking information or making clinical decisions using handheld computers were included. Classroom learning and the use of laptop computers were excluded. Two authors independently selected studies, assessed quality using the Cochrane Risk of Bias tool and extracted data. High levels of data heterogeneity negated statistical synthesis. Instead, evidence for effectiveness was summarised narratively, according to each study's aim for assessing the impact of handheld computer use. We included seven randomised trials investigating medical or nursing staffs' use of Personal Digital Assistants. Effectiveness was demonstrated across three distinct functions that emerged from the data: accessing information for clinical knowledge, adherence to guidelines and diagnostic decision making. When healthcare professionals used handheld computers to access clinical information, their knowledge improved significantly more than peers who used paper resources. When clinical guideline recommendations were presented on handheld computers, clinicians made significantly safer prescribing decisions and adhered more closely to recommendations than peers using paper resources. Finally, healthcare professionals made significantly more appropriate diagnostic decisions using clinical decision making tools on handheld computers compared to colleagues who did not have access to these tools. For these clinical decisions, the numbers need to test/screen were all less than 11. Healthcare professionals' use of handheld computers may improve their information seeking, adherence to guidelines and clinical decision making. Handheld computers can provide real time access to and analysis of clinical information. The integration of clinical decision support systems within handheld computers offers clinicians the highest level of synthesised evidence at the point of care. Future research is needed to replicate these early results and to identify beneficial clinical outcomes.

Use of handheld computers in clinical practice: a systematic review

PubMed Central

2014-01-01

Background Many healthcare professionals use smartphones and tablets to inform patient care. Contemporary research suggests that handheld computers may support aspects of clinical diagnosis and management. This systematic review was designed to synthesise high quality evidence to answer the question; Does healthcare professionals’ use of handheld computers improve their access to information and support clinical decision making at the point of care? Methods A detailed search was conducted using Cochrane, MEDLINE, EMBASE, PsycINFO, Science and Social Science Citation Indices since 2001. Interventions promoting healthcare professionals seeking information or making clinical decisions using handheld computers were included. Classroom learning and the use of laptop computers were excluded. Two authors independently selected studies, assessed quality using the Cochrane Risk of Bias tool and extracted data. High levels of data heterogeneity negated statistical synthesis. Instead, evidence for effectiveness was summarised narratively, according to each study’s aim for assessing the impact of handheld computer use. Results We included seven randomised trials investigating medical or nursing staffs’ use of Personal Digital Assistants. Effectiveness was demonstrated across three distinct functions that emerged from the data: accessing information for clinical knowledge, adherence to guidelines and diagnostic decision making. When healthcare professionals used handheld computers to access clinical information, their knowledge improved significantly more than peers who used paper resources. When clinical guideline recommendations were presented on handheld computers, clinicians made significantly safer prescribing decisions and adhered more closely to recommendations than peers using paper resources. Finally, healthcare professionals made significantly more appropriate diagnostic decisions using clinical decision making tools on handheld computers compared to colleagues who did not have access to these tools. For these clinical decisions, the numbers need to test/screen were all less than 11. Conclusion Healthcare professionals’ use of handheld computers may improve their information seeking, adherence to guidelines and clinical decision making. Handheld computers can provide real time access to and analysis of clinical information. The integration of clinical decision support systems within handheld computers offers clinicians the highest level of synthesised evidence at the point of care. Future research is needed to replicate these early results and to identify beneficial clinical outcomes. PMID:24998515

A computerized handheld decision-support system to improve pulmonary embolism diagnosis: a randomized trial.

PubMed

Roy, Pierre-Marie; Durieux, Pierre; Gillaizeau, Florence; Legall, Catherine; Armand-Perroux, Aurore; Martino, Ludovic; Hachelaf, Mohamed; Dubart, Alain-Eric; Schmidt, Jeannot; Cristiano, Mirko; Chretien, Jean-Marie; Perrier, Arnaud; Meyer, Guy

2009-11-17

Testing for pulmonary embolism often differs from that recommended by evidence-based guidelines. To assess the effectiveness of a handheld clinical decision-support system to improve the diagnostic work-up of suspected pulmonary embolism among patients in the emergency department. Cluster randomized trial. Assignment was by random-number table, providers were not blinded, and outcome assessment was automated. (ClinicalTrials.gov registration number: NCT00188032). 20 emergency departments in France. 1103 and 1768 consecutive outpatients with suspected pulmonary embolism. After a preintervention period involving 20 centers and 1103 patients, in which providers grew accustomed to inputting clinical data into handheld devices and investigators assessed baseline testing, emergency departments were randomly assigned to activation of a decision-support system on the devices (10 centers, 753 patients) or posters and pocket cards that showed validated diagnostic strategies (10 centers, 1015 patients). Appropriateness of diagnostic work-up, defined as any sequence of tests that yielded a posttest probability less than 5% or greater than 85% (primary outcome) or as strict adherence to guideline recommendations (secondary outcome); number of tests per patient (secondary outcome). The proportion of patients who received appropriate diagnostic work-ups was greater during the trial than in the preintervention period in both groups, but the increase was greater in the computer-based guidelines group (adjusted mean difference in increase, 19.3 percentage points favoring computer-based guidelines [95% CI, 2.9 to 35.6 percentage points]; P = 0.023). Among patients with appropriate work-ups, those in the computer-based guidelines group received slightly fewer tests than did patients in the paper guidelines group (mean tests per patient, 1.76 [SD, 0.98] vs. 2.25 [SD, 1.04]; P < 0.001). The study was not designed to show a difference in the clinical outcomes of patients during follow-up. A handheld decision-support system improved diagnostic decision making for patients with suspected pulmonary embolism in the emergency department.

Computational modeling in cognitive science: a manifesto for change.

PubMed

Addyman, Caspar; French, Robert M

2012-07-01

Computational modeling has long been one of the traditional pillars of cognitive science. Unfortunately, the computer models of cognition being developed today have not kept up with the enormous changes that have taken place in computer technology and, especially, in human-computer interfaces.  For all intents and purposes, modeling is still done today as it was 25, or even 35, years ago. Everyone still programs in his or her own favorite programming language, source code is rarely made available, accessibility of models to non-programming researchers is essentially non-existent, and even for other modelers, the profusion of source code in a multitude of programming languages, written without programming guidelines, makes it almost impossible to access, check, explore, re-use, or continue to develop. It is high time to change this situation, especially since the tools are now readily available to do so. We propose that the modeling community adopt three simple guidelines that would ensure that computational models would be accessible to the broad range of researchers in cognitive science. We further emphasize the pivotal role that journal editors must play in making computational models accessible to readers of their journals. Copyright © 2012 Cognitive Science Society, Inc.

Education in the workplace for the physician: clinical management states as an organizing framework.

PubMed

Greenes, R A

2000-01-01

Medical educators are interested in approaches to making selected relevant knowledge available in the context of problem-based care. This is of value both during the process of care and as a means of organizing information for offline self-study. Four trends in health information technology are relevant to achieving the goal and can be expected to play a growing role in the future. First, health care enterprises are developing approaches for access to information resources related to the care of a patient, including clinical data and images but also communication tools, referral and other logistic tools, decision support, and educational materials. Second, information for patients and methods for patient-doctor interaction and decision making are becoming available. Third, computer-based methods for representation of practice guidelines are being developed to support applications that can incorporate their logic. Finally, considering patients as being in particular "clinical management states" (or CMSs) for specific problems, approaches are being developed to use guidelines as a kind of "predictive" framework to enable development of interfaces for problem-based clinical encounters. The guidelines for a CMS can be used to identify the kinds of resources specifically needed for clinical encounters of that type. As the above trends converge to produce problem-specific environments, professional specialty organizations and continuing medical education course designers will need to focus energies on organizing and updating medical knowledge to make it available in CMS-specific contexts.

COMPOSE: Using temporal patterns for interpreting wearable sensor data with computer interpretable guidelines.

PubMed

Urovi, V; Jimenez-Del-Toro, O; Dubosson, F; Ruiz Torres, A; Schumacher, M I

2017-02-01

This paper describes a novel temporal logic-based framework for reasoning with continuous data collected from wearable sensors. The work is motivated by the Metabolic Syndrome, a cluster of conditions which are linked to obesity and unhealthy lifestyle. We assume that, by interpreting the physiological parameters of continuous monitoring, we can identify which patients have a higher risk of Metabolic Syndrome. We define temporal patterns for reasoning with continuous data and specify the coordination mechanisms for combining different sets of clinical guidelines that relate to this condition. The proposed solution is tested with data provided by twenty subjects, which used sensors for four days of continuous monitoring. The results are compared to the gold standard. The novelty of the framework stands in extending a temporal logic formalism, namely the Event Calculus, with temporal patterns. These patterns are helpful to specify the rules for reasoning with continuous data and in combining new knowledge into one consistent outcome that is tailored to the patient's profile. The overall approach opens new possibilities for delivering patient-tailored interventions and educational material before the patients present the symptoms of the disease. Copyright © 2016 Elsevier Ltd. All rights reserved.

Preliminary guidelines and recommendations for the development of material and process specifications for carbon fiber-reinforced liquid resin molded materials.

DOT National Transportation Integrated Search

2007-05-01

This document recommends guidance and criteria for the development of material and process specifications and material acceptance documents for liquid resins and continuous carbon fiber reinforcement materials used in liquid molding processes to manu...

Guidelines for PCC inputs to AASHTOWare Pavement ME.

DOT National Transportation Integrated Search

2014-12-01

The objective of this research study was to develop guidelines for portland cement concrete (PCC) material inputs to the : AASHTOWare Pavement ME Design program. The AASHTOWare Pavement ME Design is the software program used by the : Mississippi Depa...

40 CFR 406.102 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GRAIN MILLS POINT SOURCE CATEGORY Wheat Starch and...— Metric units (kg/kkg of raw material (wheat flour)) BOD5 6.0 2.0 TSS 6.0 2.0 pH (1) (1) English units (lb/1,000 lb of raw material (wheat flour)) BOD5 6.0 2.0 TSS 6.0 2.0 pH (1) (1) 1 Within the range 6.0...

Transition to adult care in pediatric solid-organ transplant: development of a practice guideline.

PubMed

Gold, Anna; Martin, Kathy; Breckbill, Katie; Avitzur, Yaron; Kaufman, Miriam

2015-06-01

Transition to adult-centered care is becoming an increasingly important area of practice in pediatric organ transplant. Standardized, best-practice guidelines are needed to assist transplant practitioners in providing optimal transitional care for this population of patients. To describe the development and implementation of a practice guideline for the transitional care of pediatric transplant recipients. A quality improvement project was undertaken in a pediatric multiorgan transplant program setting. Strategies employed included (1) creation of an interdisciplinary working group, (2) survey of transition-related practices and learning needs of transplant practitioners, (3) review of the literature and existing transition-related materials, and (4) creation of transition guidelines. An interdisciplinary survey of transplant practitioners at our institution identified practice strengths related to transitional care and learning needs. Review of relevant literature and other materials revealed limited but emerging research related to the transition of pediatric transplant recipients from pediatric to adult care. Existing transition tools were examined and applicable items identified. A practice guideline for use with pediatric transplant recipients transitioning to adult care was developed. Strategies to educate staff about the guideline and promote ongoing guideline use were implemented. Preparing pediatric transplant recipients and their families for transition to adult-centered care is an emerging challenge for transplant teams. These guidelines provide practitioners with a developmentally sensitive overview of important transition-related domains and strategies directed toward patients and their caregivers, who may experience the process of transition differently. Dissemination of the pediatric transplant transition guideline will make transition information more widely available to transplant practitioners.

Human Factors Guidelines for UAS in the National Airspace System

NASA Technical Reports Server (NTRS)

Hobbs, Alan; Shively, R. Jay

2013-01-01

The ground control stations (GCS) of some UAS have been characterized by less-than-adequate human-system interfaces. In some cases this may reflect a failure to apply an existing regulation or human factors standard. In other cases, the problem may indicate a lack of suitable guidance material. NASA is leading a community effort to develop recommendations for human factors guidelines for GCS to support routine beyond-line-of-sight UAS operations in the national airspace system (NAS). In contrast to regulations, guidelines are not mandatory requirements. However, by encapsulating solutions to identified problems or areas of risk, guidelines can provide assistance to system developers, users and regulatory agencies. To be effective, guidelines must be relevant to a wide range of systems, must not be overly prescriptive, and must not impose premature standardization on evolving technologies. By assuming that a pilot will be responsible for each UAS operating in the NAS, and that the aircraft will be required to operate in a manner comparable to conventionally piloted aircraft, it is possible to identify a generic set of pilot tasks and the information, control and communication requirements needed to support these tasks. Areas where guidelines will be useful can then be identified, utilizing information from simulations, operational experience and the human factors literature. In developing guidelines, we recognize that existing regulatory and guidance material will, at times, provide adequate coverage of an area. In other cases suitable guidelines may be found in existing military or industry human factors standards. In cases where appropriate existing standards cannot be identified, original guidelines will be proposed.

Understanding Transferable Supply Chain Lessons and Practices to a “High-Tech” Industry Using Guidelines from a Primary Sector Industry: A Case Study in the Food Industry Supply Chain

PubMed Central

Coronado Mondragon, Adrian E.; Coronado, Etienne S.

2015-01-01

Flexibility and innovation at creating shapes, adapting processes, and modifying materials characterize composites materials, a “high-tech” industry. However, the absence of standard manufacturing processes and the selection of materials with defined properties hinder the configuration of the composites materials supply chain. An interesting alternative for a “high-tech” industry such as composite materials would be to review supply chain lessons and practices in “low-tech” industries such as food. The main motivation of this study is to identify lessons and practices that comprise innovations in the supply chain of a firm in a perceived “low-tech” industry that can be used to provide guidelines in the design of the supply chain of a “high-tech” industry, in this case composite materials. This work uses the case study/site visit with analogy methodology to collect data from a Spanish leading producer of fresh fruit juice which is sold in major European markets and makes use of a cold chain. The study highlights supply base management and visibility/traceability as two elements of the supply chain in a “low-tech” industry that can provide guidelines that can be used in the configuration of the supply chain of the composite materials industry. PMID:25821848

Which Computer Is for You?

ERIC Educational Resources Information Center

Staples, Betsy

1981-01-01

Presented are some guidelines for making intelligent selections when buying computers. The intended primary use of the equipment is seen as the primary point to consider when planning the purchase. Other important points to consider and possible sources of relevant information are noted. (MP)

Elective Clinical Target Volumes for Conformal Therapy in Anorectal Cancer: A Radiation Therapy Oncology Group Consensus Panel Contouring Atlas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Myerson, Robert J.; Garofalo, Michael C.; El Naqa, Issam

2009-07-01

Purpose: To develop a Radiation Therapy Oncology Group (RTOG) atlas of the elective clinical target volume (CTV) definitions to be used for planning pelvic intensity-modulated radiotherapy (IMRT) for anal and rectal cancers. Methods and Materials: The Gastrointestinal Committee of the RTOG established a task group (the nine physician co-authors) to develop this atlas. They responded to a questionnaire concerning three elective CTVs (CTVA: internal iliac, presacral, and perirectal nodal regions for both anal and rectal case planning; CTVB: external iliac nodal region for anal case planning and for selected rectal cases; CTVC: inguinal nodal region for anal case planning andmore » for select rectal cases), and to outline these areas on individual computed tomographic images. The imaging files were shared via the Advanced Technology Consortium. A program developed by one of the co-authors (I.E.N.) used binomial maximum-likelihood estimates to generate a 95% group consensus contour. The computer-estimated consensus contours were then reviewed by the group and modified to provide a final contouring consensus atlas. Results: The panel achieved consensus CTV definitions to be used as guidelines for the adjuvant therapy of rectal cancer and definitive therapy for anal cancer. The most important difference from similar atlases for gynecologic or genitourinary cancer is mesorectal coverage. Detailed target volume contouring guidelines and images are discussed. Conclusion: This report serves as a template for the definition of the elective CTVs to be used in IMRT planning for anal and rectal cancers, as part of prospective RTOG trials.« less

40 CFR 465.20 - Applicability; description of the galvanized basis material subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... galvanized basis material subcategory. 465.20 Section 465.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS COIL COATING POINT SOURCE CATEGORY Galvanized Basis Material Subcategory § 465.20 Applicability; description of the galvanized basis material...

40 CFR 465.30 - Applicability; description of the aluminum basis material subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... aluminum basis material subcategory. 465.30 Section 465.30 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS COIL COATING POINT SOURCE CATEGORY Aluminum Basis Material Subcategory § 465.30 Applicability; description of the aluminum basis material...

Appropriate Use Policies for Computers in College/University Libraries. CLIP Note.

ERIC Educational Resources Information Center

Tuten, Jane, Comp.; Junker, Karen, Comp.

The purpose of this College Library Information Packet (CLIP) Note is to help libraries identify desirable elements found in computer use policies and to provide guidelines for college and small university libraries that want to develop policies or have been directed to implement policies for computer usage in their libraries. In January 2001, a…

Insights from a User-Centered Approach to Computerized Guidelines for Chronic Disease

ERIC Educational Resources Information Center

Shaten, Barbara Jessica

2011-01-01

For more than two decades, the medical informatics community has worked towards representing evidence-based guidelines in computer code, intended to be executed at the point of care. The purpose is to close the gap between evidence of best medical practices and the care that patients receive. Most informatics work has taken a…

Tapping the Educational Potential of Facebook: Guidelines for Use in Higher Education

ERIC Educational Resources Information Center

Wang, Rex; Scown, Phil; Urquhart, Cathy; Hardman, Julie

2014-01-01

Facebook is a frequently used Computer Mediated Environment (CME) for students and others to build social connections, with identities and deposited self-expression. Its widespread use makes it appropriate for consideration as an educational tool; though one that does not yet have clear guidelines for use. Whether a social networking site can be…

77 FR 15452 - Visual-Manual NHTSA Driver Distraction Guidelines for In-Vehicle Electronic Devices

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-15

... proposed NHTSA Guidelines are meant to promote safety by discouraging the introduction of excessively... your statement or other material (e.g., film clips and slides) so that it can be placed into the docket...

Dietary Guidelines for Americans, 2005.

ERIC Educational Resources Information Center

US Department of Health and Human Services, 2005

2005-01-01

This document is intended primarily for use by policymakers, healthcare providers, nutritionists, and nutrition educators. The information in the Dietary Guidelines is useful for the development of educational materials and aids policymakers in designing and implementing nutrition-related programs, including federal food, nutrition…

7 CFR 3203.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... described in paragraph (1) of this definition. Computers or other technical equipment means central... 7 Agriculture 15 2013-01-01 2013-01-01 false Definitions. 3203.3 Section 3203.3 Agriculture..., DEPARTMENT OF AGRICULTURE GUIDELINES FOR THE TRANSFER OF EXCESS COMPUTERS OR OTHER TECHNICAL EQUIPMENT...

40 CFR 466.10 - Applicability; description of the steel basis material.

Code of Federal Regulations, 2013 CFR

2013-07-01

... steel basis material. 466.10 Section 466.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) PORCELAIN ENAMELING POINT SOURCE CATEGORY Steel Basis Material Subcategory § 466.10 Applicability; description of the steel basis material. This subpart...

40 CFR 465.10 - Applicability; description of the steel basis material subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... steel basis material subcategory. 465.10 Section 465.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS COIL COATING POINT SOURCE CATEGORY Steel Basis Material Subcategory § 465.10 Applicability; description of the steel basis material subcategory...

40 CFR 465.10 - Applicability; description of the steel basis material subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... steel basis material subcategory. 465.10 Section 465.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS COIL COATING POINT SOURCE CATEGORY Steel Basis Material Subcategory § 465.10 Applicability; description of the steel basis material subcategory...

40 CFR 466.10 - Applicability; description of the steel basis material.

Code of Federal Regulations, 2010 CFR

2010-07-01

... steel basis material. 466.10 Section 466.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PORCELAIN ENAMELING POINT SOURCE CATEGORY Steel Basis Material Subcategory § 466.10 Applicability; description of the steel basis material. This subpart applies to...

40 CFR 466.10 - Applicability; description of the steel basis material.

Code of Federal Regulations, 2014 CFR

2014-07-01

... steel basis material. 466.10 Section 466.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) PORCELAIN ENAMELING POINT SOURCE CATEGORY Steel Basis Material Subcategory § 466.10 Applicability; description of the steel basis material. This subpart...

40 CFR 466.10 - Applicability; description of the steel basis material.

Code of Federal Regulations, 2012 CFR

2012-07-01

... steel basis material. 466.10 Section 466.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) PORCELAIN ENAMELING POINT SOURCE CATEGORY Steel Basis Material Subcategory § 466.10 Applicability; description of the steel basis material. This subpart...

40 CFR 466.10 - Applicability; description of the steel basis material.

Code of Federal Regulations, 2011 CFR

2011-07-01

... steel basis material. 466.10 Section 466.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PORCELAIN ENAMELING POINT SOURCE CATEGORY Steel Basis Material Subcategory § 466.10 Applicability; description of the steel basis material. This subpart applies to...

Evaluation of technology to identify and assess overweight children and adolescents.

PubMed

Gance-Cleveland, Bonnie; Gilbert, Lynn H; Kopanos, Taynin; Gilbert, Kevin C

2010-01-01

The current obesity epidemic has produced a generation of children that may be the first to have a life expectancy shorter than their parents. To address the obesity epidemic, experts have published recommendations for providers. Research suggests the publication of guidelines may not change provider behavior. This study evaluates computer assistance for implementing obesity guidelines in school-based health centers. Significant improvements in identification and assessment of obesity in children with technology support were noted. Computer decision support shows promise for promoting the implementation of current recommendations by supporting providers in identifying, assessing, and providing tailored recommendations for children at risk of obesity.

Sensitivity analysis of add-on price estimate for select silicon wafering technologies

NASA Technical Reports Server (NTRS)

Mokashi, A. R.

1982-01-01

The cost of producing wafers from silicon ingots is a major component of the add-on price of silicon sheet. Economic analyses of the add-on price estimates and their sensitivity internal-diameter (ID) sawing, multiblade slurry (MBS) sawing and fixed-abrasive slicing technique (FAST) are presented. Interim price estimation guidelines (IPEG) are used for estimating a process add-on price. Sensitivity analysis of price is performed with respect to cost parameters such as equipment, space, direct labor, materials (blade life) and utilities, and the production parameters such as slicing rate, slices per centimeter and process yield, using a computer program specifically developed to do sensitivity analysis with IPEG. The results aid in identifying the important cost parameters and assist in deciding the direction of technology development efforts.

Feasibility and impact of a computer-guided consultation on guideline-based management of COPD in general practice.

PubMed

Angus, Robert M; Thompson, Elizabeth B; Davies, Lisa; Trusdale, Ann; Hodgson, Chris; McKnight, Eddie; Davies, Andrew; Pearson, Mike G

2012-12-01

Applying guidelines is a universal challenge that is often not met. Intelligent software systems that facilitate real-time management during a clinical interaction may offer a solution. To determine if the use of a computer-guided consultation that facilitates the National Institute for Health and Clinical Excellence-based chronic obstructive pulmonary disease (COPD) guidance and prompts clinical decision-making is feasible in primary care and to assess its impact on diagnosis and management in reviews of COPD patients. Practice nurses, one-third of whom had no specific respiratory training, undertook a computer-guided review in the usual consulting room setting using a laptop computer with the screen visible to them and to the patient. A total of 293 patients (mean (SD) age 69.7 (10.1) years, 163 (55.6%) male) with a diagnosis of COPD were randomly selected from GP databases in 16 practices and assessed. Of 236 patients who had spirometry, 45 (19%) did not have airflow obstruction and the guided clinical history changed the primary diagnosis from COPD in a further 24 patients. In the 191 patients with confirmed COPD, the consultations prompted management changes including 169 recommendations for altered prescribing of inhalers (addition or discontinuation, inhaler dose or device). In addition, 47% of the 55 current smokers were referred for smoking cessation support, 12 (6%) for oxygen assessment, and 47 (24%) for pulmonary rehabilitation. Computer-guided consultations are practicable in general practice. Primary care COPD databases were confirmed to contain a significant proportion of incorrectly assigned patients. They resulted in interventions and the rationalisation of prescribing in line with recommendations. Only in 22 (12%) of those fully assessed was no management change suggested. The introduction of a computer-guided consultation offers the prospect of comprehensive guideline quality management.

Australian Infection Control Association members' use of skills and resources that promote evidence-based infection control.

PubMed

Murphy, C L; McLaws, M

2000-04-01

To adopt an evidence-based approach, professionals must be able to access, identify, interpret, and critically appraise best evidence. Critical appraisal requires essential skills, such as computer literacy and an understanding of research principles. These skills also are required for professionals to contribute to evidence. In 1996, members of the Australian Infection Control Association were surveyed to establish a profile including the extent to which they were reading infection control publications, using specific documents for policy and guideline development, developing and undertaking research, publishing research, and using computers. The relationships between demographics, computer use, and research activity were examined. The response rate was 63. 4% (630/993). The study group comprised mostly women (96.1%), and most (66.4%) were older than 40 years of age. Median infection control experience was 4 years (mean, 5.4 years; range, <12 months to 35 years). When developing guidelines and policies (92.7%; 584/630), infection control professionals reviewed State Health Department Infection Control Guidelines and Regulations. Research relating to infection control was undertaken by 21.5% (135/628) of the sample, and 27.6% (37/134) of this group published their research findings. Of the respondents (51.1%; 318/622) who used a computer to undertake infection control tasks, the majority (89.0%) used a personal computer for word processing. Regardless of infection control experience, Australian infection control professionals must be adequately prepared to contribute to, access, appraise, and where appropriate, apply best evidence to their practice. We suggest that computer literacy, an understanding of research principles, and familiarity with infection control literature are three essential skills that infection control professionals must possess and regularly exercise.

Application Guidelines for Quality Assurance Procedures for Hybrid Microcircuits.

DTIC Science & Technology

1983-03-01

INSPECTION LIMITS SYMBOL TEST CONDITIONS UNITS SUBGROUP 6 TC = -55 DEGREES C AVI0 1 SAME AS SUBGROUP 5 -0.1 5 Vpp VOS SAME AS SUBGROUP 4 50 m%LC V0 2 ... 1 . Line Certification 2 . Fabrication Techniques and Material Qualification Procedures 3. Design Guidelines e. Application Guidelines. Items a through... 1 2 . GENERAL ................... ......... ................. 3 2.1 Summary of documents generated ........................ 3 2.2 Contract objectives

Statistical Methods in Psychology Journals.

ERIC Educational Resources Information Center

Willkinson, Leland

1999-01-01

Proposes guidelines for revising the American Psychological Association (APA) publication manual or other APA materials to clarify the application of statistics in research reports. The guidelines are intended to induce authors and editors to recognize the thoughtless application of statistical methods. Contains 54 references. (SLD)

Teaching about Our World Community: Guidelines and Resources.

ERIC Educational Resources Information Center

Hoge, John Douglas; Allen, Rodney F.

1991-01-01

Offers guidelines for teaching about foreign countries in elementary school social studies lessons. Explains ways to determine content and goals, build background information, and locate instructional materials/community resources. Suggests activities for beginning, sustaining, and concluding units. Stresses importance of maintaining student…

Development of design guidelines for proper selection of graded aggregate base in Maryland state highways.

DOT National Transportation Integrated Search

2015-01-01

The mechanical and drainage properties of graded aggregate base material are the level one input in mechanistic : pavement design. Maryland State Highway Administration (SHA) is in need of guidelines for evaluation of stiffness : and drainage charact...

How-to-Do-It: Infection Control Guidelines for Blood Typing & Blood Smear Labs.

ERIC Educational Resources Information Center

Vetter, Edwin A.

1989-01-01

Provides a set of guidelines for infection control of the Acquired Immune Deficiency Syndrome and the serum hepatitis viruses during blood typing procedures. Emphasizes that disposal of blood contaminated materials should comply with local health department recommendations. (RT)

USING SEDIMENT QUALITY GUIDELINES IN DREDGED MATERIAL ASSESSMENTS

EPA Science Inventory

Sediment quality guidelines (SQGs) are not formally included in the frameworks described in the Inland Testing manual and the Green Book because these frameworks are biologically based. The SQGs are often used informally, however, to help put the results of biological testing in ...

SuML: A Survey Markup Language for Generalized Survey Encoding

PubMed Central

Barclay, MW; Lober, WB; Karras, BT

2002-01-01

There is a need in clinical and research settings for a sophisticated, generalized, web based survey tool that supports complex logic, separation of content and presentation, and computable guidelines. There are many commercial and open source survey packages available that provide simple logic; few provide sophistication beyond “goto” statements; none support the use of guidelines. These tools are driven by databases, static web pages, and structured documents using markup languages such as eXtensible Markup Language (XML). We propose a generalized, guideline aware language and an implementation architecture using open source standards.

Z-Pin Stubble Technology Advanced Research (ZSTAR)

DTIC Science & Technology

2008-04-01

2.3 MANUFACTURING WITH RUBBER SHEETS ...................................................................... 12 2.3.1 Rubber Sheet Material...17 2.3.6 Rubber Material Intact and Gripped ........................................................................ 17 2.3.7 Successful...0.125 inch Stubble Fabrication ............................................................... 17 2.3.8 Rubber Material Guidelines

10 CFR 2.1001 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., magnetic, graphic matter, or other documentary material, regardless of form or characteristic. Documentary... documentary material shall be guided by the topical guidelines in the applicable NRC Regulatory Guide. DOE... Network means the combined system that makes documentary material available electronically to parties...

Evaluation Parameters for Computer-Adaptive Testing

ERIC Educational Resources Information Center

Georgiadou, Elisabeth; Triantafillou, Evangelos; Economides, Anastasios A.

2006-01-01

With the proliferation of computers in test delivery today, adaptive testing has become quite popular, especially when examinees must be classified into two categories (passfail, master nonmaster). Several well-established organisations have provided standards and guidelines for the design and evaluation of educational and psychological testing.…

Design Principles and Guidelines for Security

DTIC Science & Technology

2007-11-21

Padula , Secure Computer Systems: Unified Exposition and Multics Interpretation. Electronic Systems Division, USAF. ESD-TR-75-306, MTR-2997 Rev.1...Hanscom AFB, MA. March 1976 [7] David Elliott Bell. “Looking Back at the Bell-La Padula Model,” Proc. Annual Computer Security Applications Conference

Avoiding Split Attention in Computer-Based Testing: Is Neglecting Additional Information Facilitative?

ERIC Educational Resources Information Center

Jarodzka, Halszka; Janssen, Noortje; Kirschner, Paul A.; Erkens, Gijsbert

2015-01-01

This study investigated whether design guidelines for computer-based learning can be applied to computer-based testing (CBT). Twenty-two students completed a CBT exam with half of the questions presented in a split-screen format that was analogous to the original paper-and-pencil version and half in an integrated format. Results show that students…

Cloud Computing for Mission Design and Operations

NASA Technical Reports Server (NTRS)

Arrieta, Juan; Attiyah, Amy; Beswick, Robert; Gerasimantos, Dimitrios

2012-01-01

The space mission design and operations community already recognizes the value of cloud computing and virtualization. However, natural and valid concerns, like security, privacy, up-time, and vendor lock-in, have prevented a more widespread and expedited adoption into official workflows. In the interest of alleviating these concerns, we propose a series of guidelines for internally deploying a resource-oriented hub of data and algorithms. These guidelines provide a roadmap for implementing an architecture inspired in the cloud computing model: associative, elastic, semantical, interconnected, and adaptive. The architecture can be summarized as exposing data and algorithms as resource-oriented Web services, coordinated via messaging, and running on virtual machines; it is simple, and based on widely adopted standards, protocols, and tools. The architecture may help reduce common sources of complexity intrinsic to data-driven, collaborative interactions and, most importantly, it may provide the means for teams and agencies to evaluate the cloud computing model in their specific context, with minimal infrastructure changes, and before committing to a specific cloud services provider.

Computing time-series suspended-sediment concentrations and loads from in-stream turbidity-sensor and streamflow data

USGS Publications Warehouse

Rasmussen, Patrick P.; Gray, John R.; Glysson, G. Doug; Ziegler, Andrew C.

2010-01-01

Over the last decade, use of a method for computing suspended-sediment concentration and loads using turbidity sensors—primarily nephelometry, but also optical backscatter—has proliferated. Because an in- itu turbidity sensor is capa le of measuring turbidity instantaneously, a turbidity time series can be recorded and related directly to time-varying suspended-sediment concentrations. Depending on the suspended-sediment characteristics of the measurement site, this method can be more reliable and, in many cases, a more accurate means for computing suspended-sediment concentrations and loads than traditional U.S. Geological Survey computational methods. Guidelines and procedures for estimating time s ries of suspended-sediment concentration and loading as a function of turbidity and streamflow data have been published in a U.S. Geological Survey Techniques and Methods Report, Book 3, Chapter C4. This paper is a summary of these guidelines and discusses some of the concepts, s atistical procedures, and techniques used to maintain a multiyear suspended sediment time series.

WHO Expert Committee on Specifications for Pharmaceutical Preparations.

PubMed

2005-01-01

This report presents the recommendations of an international group of experts convened by the World Health Organization to consider matters concerning the quality assurance of pharmaceuticals and specifications for drug substances and dosage forms. Of particular relevance to drug regulatory authorities and pharmaceutical manufacturers, this report discusses the monographs on antiretrovirals proposed for inclusion in The International Pharmacopoeia and specifications for radiopharmaceuticals, quality specifications for antituberculosis drugs and the revision of the monograph on artemisinin derivatives, as well as quality control of reference materials, good manufacturing practices (GMP), inspection, distribution and trade and other aspects of quality assurance of pharmaceuticals, and regulatory issues. The report is complemented by a number of annexes, including an amendment to good manufacturing practices: main principles regarding the requirement for the sampling of starting materials, guidelines on good manufacturing practices regarding water for pharmaceutical use, guidelines on the sampling of pharmaceutical products and related materials and draft guidelines for registration of fixed-dose combination medicinal products.

Visualizing 3D Food Microstructure Using Tomographic Methods: Advantages and Disadvantages.

PubMed

Wang, Zi; Herremans, Els; Janssen, Siem; Cantre, Dennis; Verboven, Pieter; Nicolaï, Bart

2018-03-25

X-ray micro-computed tomography (micro-CT) provides the unique ability to capture intact internal microstructure data without significant preparation of the sample. The fundamentals of micro-CT technology are briefly described along with a short introduction to basic image processing, quantitative analysis, and derivative computational modeling. The applications and limitations of micro-CT in industries such as meat, dairy, postharvest, and bread/confectionary are discussed to serve as a guideline to the plausibility of utilizing the technique for detecting features of interest. Component volume fractions, their respective size/shape distributions, and connectivity, for example, can be utilized for product development, manufacturing process tuning and/or troubleshooting. In addition to determining structure-function relations, micro-CT can be used for foreign material detection to further ensure product quality and safety. In most usage scenarios, micro-CT in its current form is perfectly adequate for determining microstructure in a wide variety of food products. However, in low-contrast and low-stability samples, emphasis is placed on the shortcomings of the current systems to set realistic expectations for the intended users.

Computerization of guidelines: a knowledge specification method to convert text to detailed decision tree for electronic implementation.

PubMed

Aguirre-Junco, Angel-Ricardo; Colombet, Isabelle; Zunino, Sylvain; Jaulent, Marie-Christine; Leneveut, Laurence; Chatellier, Gilles

2004-01-01

The initial step for the computerization of guidelines is the knowledge specification from the prose text of guidelines. We describe a method of knowledge specification based on a structured and systematic analysis of text allowing detailed specification of a decision tree. We use decision tables to validate the decision algorithm and decision trees to specify and represent this algorithm, along with elementary messages of recommendation. Edition tools are also necessary to facilitate the process of validation and workflow between expert physicians who will validate the specified knowledge and computer scientist who will encode the specified knowledge in a guide-line model. Applied to eleven different guidelines issued by an official agency, the method allows a quick and valid computerization and integration in a larger decision support system called EsPeR (Personalized Estimate of Risks). The quality of the text guidelines is however still to be developed further. The method used for computerization could help to define a framework usable at the initial step of guideline development in order to produce guidelines ready for electronic implementation.

Sustainable design guidelines to support the Washington State ferries terminal design manual : stormwater and material issues.

DOT National Transportation Integrated Search

2011-08-01

In an effort to assist the developers of the terminal design manual in potentially addressing : sustainable design issues, the overall goal is to produce Sustainable Design Guidelines that : will specifically address the unique needs and requirements...

Affirmative Action Guidelines.

ERIC Educational Resources Information Center

Barbarita, Juana

Clarifying guidelines are presented for use by California community college districts in interpreting Title 5 of the California Administrative Code, which requires the adoption of employee affirmative action plans, including goals and timetables to increase the number of ethnic minorities and women in district employment. Following material on the…

Curriculum Materials Examination System.

ERIC Educational Resources Information Center

Bond, David J.

This document is a guideline for selection and evaluation of social studies curriculum materials developed by the Marin Social Studies Project. Questions are presented which will help in the examination of materials so that specific strengths and weaknesses in the materials can be determined. Consideration is given to the objectives and rationale…

Developing Textbook Materials in Uncommon Languages.

ERIC Educational Resources Information Center

Lathrop, Thomas A.

Guidelines are offered for preparing and publishing textbook materials in Portuguese and other uncommonly taught languages. The available options for publishing Portuguese materials include two textbook publishers, three university presses, self-publication, and the Cabrilho Press, which produces language textbooks. Methods for submitting…

Computer-Based Training Starter Kit.

ERIC Educational Resources Information Center

Federal Interagency Group for Computer-Based Training, Washington, DC.

Intended for use by training professionals with little or no background in the application of automated data processing (ADP) systems, processes, or procurement requirements, this reference manual provides guidelines for establishing a computer based training (CBT) program within a federal agency of the United States government. The manual covers:…

[Guidelines 2.0: systematic development of a comprehensive checklist for a successful guideline enterprise].

PubMed

Morgano, Gian Paolo; Davoli, Marina; Moja, Lorenzo; Amato, Laura; Ferroni, Eliana; Tirani, Marcello

2015-06-01

Guideline developers worldwide are struggling with the lack of guidance for the practical steps in the guideline enterprise. Our objective was to systematically compile a comprehensive checklist of items linked to relevant resources and tools that guideline developers would consider for development and support of implementation. Data sources included manuals of international guideline developers, literature on guidelines for guidelines with a focus on international and national guideline agencies, professional societies, and recent systematic guidance articles. We reviewed these sources in duplicate, extracted items using a sensitive approach and developed overarching topics that are relevant to guidelines. In an iterative process, we reviewed items for duplication and omissions and involved experts in guideline development for revisions. We developed a checklist with 18 topics and 146 items and a webpage to facilitate its use by guideline developers (http://cebgrade.mcmaster.ca/guidecheck.html). The topics and items included cover all stages of the guideline enterprise, from planning to formulating recommendations, to dissemination and evaluation. The final itemized guideline development checklist (GDC) includes links to training material and resources for methodology. The GDC will serve as a resource for those involved in guideline development and we will use crowdsourcing to keep the checklist up to date and enhance it.

Implementing clinical guidelines for chronic obstructive pulmonary disease: barriers and solutions

PubMed Central

Overington, Jeff D.; Huang, Yao C.; Abramson, Michael J.; Brown, Juliet L.; Goddard, John R.; Bowman, Rayleen V.; Fong, Kwun M.

2014-01-01

Chronic obstructive pulmonary disease (COPD) is a complex chronic lung disease characterised by progressive fixed airflow limitation and acute exacerbations that frequently require hospitalisation. Evidence-based clinical guidelines for the diagnosis and management of COPD are now widely available. However, the uptake of these COPD guidelines in clinical practice is highly variable, as is the case for many other chronic disease guidelines. Studies have identified many barriers to implementation of COPD and other guidelines, including factors such as lack of familiarity with guidelines amongst clinicians and inadequate implementation programs. Several methods for enhancing adherence to clinical practice guidelines have been evaluated, including distribution methods, professional education sessions, electronic health records (EHR), point of care reminders and computer decision support systems (CDSS). Results of these studies are mixed to date, and the most effective ways to implement clinical practice guidelines remain unclear. Given the significant resources dedicated to evidence-based medicine, effective dissemination and implementation of best practice at the patient level is an important final step in the process of guideline development. Future efforts should focus on identifying optimal methods for translating the evidence into everyday clinical practice to ensure that patients receive the best care. PMID:25478199

The GuideLine Interchange Format

PubMed Central

Ohno-Machado, Lucila; Gennari, John H.; Murphy, Shawn N.; Jain, Nilesh L.; Tu, Samson W.; Oliver, Diane E.; Pattison-Gordon, Edward; Greenes, Robert A.; Shortliffe, Edward H.; Barnett, G. Octo

1998-01-01

Objective: To allow exchange of clinical practice guidelines among institutions and computer-based applications. Design: The GuideLine Interchange Format (GLIF) specification consists of the GLIF model and the GLIF syntax. The GLIF model is an object-oriented representation that consists of a set of classes for guideline entities, attributes for those classes, and data types for the attribute values. The GLIF syntax specifies the format of the test file that contains the encoding. Methods: Researchers from the InterMed Collaboratory at Columbia University, Harvard University (Brigham and Women's Hospital and Massachusetts General Hospital), and Stanford University analyzed four existing guideline systems to derive a set of requirements for guideline representation. The GLIF specification is a consensus representation developed through a brainstorming process. Four clinical guidelines were encoded in GLIF to assess its expressivity and to study the variability that occurs when two people from different sites encode the same guideline. Results: The encoders reported that GLIF was adequately expressive. A comparison of the encodings revealed substantial variability. Conclusion: GLIF was sufficient to model the guidelines for the four conditions that were examined. GLIF needs improvement in standard representation of medical concepts, criterion logic, temporal information, and uncertainty. PMID:9670133

Guidelines for development of structural integrity programs for DOE high-level waste storage tanks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bandyopadhyay, K.; Bush, S.; Kassir, M.

Guidelines are provided for developing programs to promote the structural integrity of high-level waste storage tanks and transfer lines at the facilities of the Department of Energy. Elements of the program plan include a leak-detection system, definition of appropriate loads, collection of data for possible material and geometric changes, assessment of the tank structure, and non-destructive examination. Possible aging degradation mechanisms are explored for both steel and concrete components of the tanks, and evaluated to screen out nonsignificant aging mechanisms and to indicate methods of controlling the significant aging mechanisms. Specific guidelines for assessing structural adequacy will be provided inmore » companion documents. Site-specific structural integrity programs can be developed drawing on the relevant portions of the material in this document.« less

Danish first aid books compliance with the new evidence-based non-resuscitative first aid guidelines.

PubMed

Jensen, Theo Walther; Møller, Thea Palsgaard; Viereck, Søren; Roland, Jens; Pedersen, Thomas Egesborg; Lippert, Freddy K

2018-01-10

The European Resuscitation Council (ERC) released new guidelines on resuscitation in 2015. For the first time, the guidelines included a separate chapter on first aid for laypersons. We analysed the current major Danish national first aid books to identify potential inconsistencies between the current books and the new evidence-based first aid guidelines. We identified first aid books from all the first aid courses offered by major Danish suppliers. Based on the new ERC first aid guidelines, we developed a checklist of 26 items within 16 different categories to assess the content; this checklist was adapted following the principle of mutually exclusive and collectively exhaustive questioning. To assess the agreement between four raters, Fleiss' kappa test was used. Items that did not reach an acceptable kappa score were excluded. We evaluated 10 first aid books used for first aid courses and published between 2009 and 2015. The content of the books complied with the new in 38% of the answers. In 12 of the 26 items, there was less than 50% consistency. These items include proximal pressure points and elevation of extremities for the control of bleeding, use of cervical collars, treatment for an open chest wound, burn dressing, dental avulsion, passive leg raising, administration of bronchodilators, adrenaline, and aspirin. Danish course material showed significant inconsistencies with the new evidence-based first aid guidelines. The new knowledge from the evidence-based guidelines should be incorporated into revised and updated first aid course material.

A patient workflow management system built on guidelines.

PubMed Central

Dazzi, L.; Fassino, C.; Saracco, R.; Quaglini, S.; Stefanelli, M.

1997-01-01

To provide high quality, shared, and distributed medical care, clinical and organizational issues need to be integrated. This work describes a methodology for developing a Patient Workflow Management System, based on a detailed model of both the medical work process and the organizational structure. We assume that the medical work process is represented through clinical practice guidelines, and that an ontological description of the organization is available. Thus, we developed tools 1) for acquiring the medical knowledge contained into a guideline, 2) to translate the derived formalized guideline into a computational formalism, precisely a Petri Net, 3) to maintain different representation levels. The high level representation guarantees that the Patient Workflow follows the guideline prescriptions, while the low level takes into account the specific organization characteristics and allow allocating resources for managing a specific patient in daily practice. PMID:9357606

Oral History: Playing by the Rules.

ERIC Educational Resources Information Center

Oshinsky, David M.

1990-01-01

Describes oral history interviewing techniques that the author used to research his biography of Joseph McCarthy before the American Historical Association (AHA) issued its seven guidelines on interview use. These guidelines focus on taping sessions, signed releases, written transcripts, respecting human dignity, and placing materials in archive…

A Guide to Workshops on Challenging Racism.

ERIC Educational Resources Information Center

Zanda, Antoinette

This handbook, which is designed for people experienced in facilitating workshops, contains materials for/about planning and conducting popular education workshops on challenging racism. Presented first are guidelines for using the handbook, a rationale for the proposed approach to unlearning racism, and guidelines for guarding against abuse…

Materials selection guidelines for geothermal energy utilization systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ellis, P.F. II; Conover, M.F.

1981-01-01

This manual includes geothermal fluid chemistry, corrosion test data, and materials operating experience. Systems using geothermal energy in El Salvador, Iceland, Italy, Japan, Mexico, New Zealand, and the United States are described. The manual provides materials selection guidelines for surface equipment of future geothermal energy systems. The key chemical species that are significant in determining corrosiveness of geothermal fluids are identified. The utilization modes of geothermal energy are defined as well as the various physical fluid parameters that affect corrosiveness. Both detailed and summarized results of materials performance tests and applicable operating experiences from forty sites throughout the world aremore » presented. The application of various non-metal materials in geothermal environments are discussed. Included in appendices are: corrosion behavior of specific alloy classes in geothermal fluids, corrosion in seawater desalination plants, worldwide geothermal power production, DOE-sponsored utilization projects, plant availability, relative costs of alloys, and composition of alloys. (MHR)« less

Preparation of digital movie clips for online journal publication.

PubMed

Yam, Chun-Shan

2006-07-01

This article presents general guidelines for preparing movie clips for online journal publication. As more and more radiology journals establish an online presence, radiologists wishing to submit journal articles with movie clips need to understand the electronic submission process. Viewing a movie clip via an online journal is different from viewing one with PowerPoint using a local desktop computer because the movie file must first be downloaded onto the client computer before it can be displayed. Users thus should be cautious in selecting movie format and compression when creating movie clips for online journals. This article provides step-by-step demonstrations and general guidelines for movie format and compression selections.

40 CFR 246.202-6 - Recommended procedures: Cost analysis.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., storage and transportation costs have been made, and estimated tonnages of both recoverable material and...) SOLID WASTES SOURCE SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures... paper sales and savings from diverting recycled materials from disposal. Potential costs to upgrade...

40 CFR 246.201-7 - Recommended procedures: Cost analysis.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., storage and transportation costs have been made, and estimated tonnages of both recoverable materials and...) SOLID WASTES SOURCE SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures... paper sales and savings from diverting recycled materials from disposal. Potential costs to upgrade...

Educational Intervention Improves Compliance With AAN Guidelines for Return Epilepsy Visits: A Quality Improvement Project.

PubMed

Nelson, Gary R; Filloux, Francis M; Kerr, Lynne M

2016-10-01

In 2011, the American Academy of Neurology (AAN) released guidelines for return seizure visits detailing 8 points that should be addressed during such visits. These guidelines are designed to improve routine follow-up care for epilepsy patients. The authors performed a quality improvement project aimed at increasing compliance with these guidelines after educating providers about them. The authors performed a chart review before and after an intervention which included: education regarding the guidelines, providing materials to remind providers of the guidelines, and templates to facilitate compliance. The authors reviewed charts at 2 and 6 months after the intervention. Significant improvement in documentation of 4 of the 8 measures was observed after this educational intervention. This suggests that simple educational interventions may help providers change practice and can improve compliance with new guidelines while requiring minimal time and resources to implement. © The Author(s) 2016.

The Use of Computer Simulation Techniques in Educational Planning.

ERIC Educational Resources Information Center

Wilson, Charles Z.

Computer simulations provide powerful models for establishing goals, guidelines, and constraints in educational planning. They are dynamic models that allow planners to examine logical descriptions of organizational behavior over time as well as permitting consideration of the large and complex systems required to provide realistic descriptions of…

Perspectives on Human-Computer Interface: Introduction and Overview.

ERIC Educational Resources Information Center

Harman, Donna; Lunin, Lois F.

1992-01-01

Discusses human-computer interfaces in information seeking that focus on end users, and provides an overview of articles in this section that (1) provide librarians and information specialists with guidelines for selecting information-seeking systems; (2) provide producers of information systems with directions for production or research; and (3)…

Using POGIL to Help Students Learn to Program

ERIC Educational Resources Information Center

Hu, Helen H.; Shepherd, Tricia D.

2013-01-01

POGIL has been successfully implemented in a scientific computing course to teach science students how to program in Python. Following POGIL guidelines, the authors have developed guided inquiry activities that lead student teams to discover and understand programming concepts. With each iteration of the scientific computing course, the authors…

Teaching Perspectives among Introductory Computer Programming Faculty in Higher Education

ERIC Educational Resources Information Center

Mainier, Michael J.

2011-01-01

This study identified the teaching beliefs, intentions, and actions of 80 introductory computer programming (CS1) faculty members from institutions of higher education in the United States using the Teacher Perspectives Inventory. Instruction method used inside the classroom, categorized by ACM CS1 curriculum guidelines, was also captured along…

Computer-Aided Instruction.

ERIC Educational Resources Information Center

Hunt, Graham

This report discusses the impact of and presents guidelines for developing a computer-aided instructional (CAI) system. The first section discusses CAI in terms of the need for the countries of Asia to increase their economic self-sufficiency. The second section examines various theories on the nature of learning with special attention to the role…

Computer Assisted Instruction for the Mentally Retarded.

ERIC Educational Resources Information Center

Providence Coll., RI.

Computer Assisted Instruction (CAI) for the mentally retarded is described; the advantages of CAI (which generally follows the pattern of programed instruction) are listed; and the roles of the teacher and the student are summarized. The coursewriter is explained, and its use as an experimental tool discussed. Guidelines are given covering…

Directions for Education Building Planning Guidelines. Facility Services Section.

ERIC Educational Resources Information Center

Guenther, Peter

A major problem of accommodating computer technology in today's classrooms is space availability and the general design and construction of most traditional classrooms. This document addresses the types of classroom architectural and interior considerations believed necessary in order to create a more amenable environment for classroom computers.…

Improving the readability of online foot and ankle patient education materials.

PubMed

Sheppard, Evan D; Hyde, Zane; Florence, Mason N; McGwin, Gerald; Kirchner, John S; Ponce, Brent A

2014-12-01

Previous studies have shown the need for improving the readability of many patient education materials to increase patient comprehension. This study's purpose was to determine the readability of foot and ankle patient education materials and to determine the extent readability can be improved. We hypothesized that the reading levels would be above the recommended guidelines and that decreasing the sentence length would also decrease the reading level of these patient educational materials. Patient education materials from online public sources were collected. The readability of these articles was assessed by a readability software program. The detailed instructions provided by the National Institutes of Health (NIH) were then used as a guideline for performing edits to help improve the readability of selected articles. The most quantitative guideline, lowering all sentences to less than 15 words, was chosen to show the effect of following the NIH recommendations. The reading levels of the sampled articles were above the sixth to seventh grade recommendations of the NIH. The MedlinePlus website, which is a part of the NIH website, had the lowest reading level (8.1). The articles edited had an average reduction of 1.41 grade levels, with the lowest reduction in the Medline articles of 0.65. Providing detailed instructions to the authors writing these patient education articles and implementing editing techniques based on previous recommendations could lead to an improvement in the readability of patient education materials. This study provides authors of patient education materials with simple editing techniques that will allow for the improvement in the readability of online patient educational materials. The improvement in readability will provide patients with more comprehendible education materials that can strengthen patient awareness of medical problems and treatments. © The Author(s) 2014.

Intelligent Transportation Systems: Automated Guided Vehicle Systems in Changing Logistics Environments

NASA Astrophysics Data System (ADS)

Schulze, L.; Behling, S.; Buhrs, S.

2008-06-01

The usage of Automated Guided Vehicle Systems (AGVS) is growing. This has not always been the case in the past. A new record of the sells numbers is the result of inventive developments, new applications and modern thinking. One market that AGVS were not able to thoroughly conquer yet were rapidly changing logistics environments. The advantages in recurrent transportation with AGVS used to be hindered by the needs of flexibility. When nowadays managers talk about Flexible Manufacturing Systems (FMS) there is no reason not to consider AGVS. Fixed guidelines, permanent transfer stations and static routes are no necessity for most AGVS producers. Flexible Manufacturing Systems can raise profitability with AGVS. When robots start saving billions in production costs, the next step at same plants are automated materials handling systems. Today, there are hundreds of instances of computer-controlled systems designed to handle and transport materials, many of which have replaced conventional human-driven platform trucks. Reduced costs due to damages and failures, tracking and tracing as well as improved production scheduling on top of fewer personnel needs are only some of the advantages.

Quantitative non-destructive testing

NASA Technical Reports Server (NTRS)

Welch, C. S.

1985-01-01

The work undertaken during this period included two primary efforts. The first is a continuation of theoretical development from the previous year of models and data analyses for NDE using the Optical Thermal Infra-Red Measurement System (OPTITHIRMS) system, which involves heat injection with a laser and observation of the resulting thermal pattern with an infrared imaging system. The second is an investigation into the use of the thermoelastic effect as an effective tool for NDE. As in the past, the effort is aimed towards NDE techniques applicable to composite materials in structural applications. The theoretical development described produced several models of temperature patterns over several geometries and material types. Agreement between model data and temperature observations was obtained. A model study with one of these models investigated some fundamental difficulties with the proposed method (the primitive equation method) for obtaining diffusivity values in plates of thickness and supplied guidelines for avoiding these difficulties. A wide range of computing speeds was found among the various models, with a one-dimensional model based on Laplace's integral solution being both very fast and very accurate.

Digital radiography: are the manufacturers' settings too high? Optimisation of the Kodak digital radiography system with aid of the computed radiography dose index.

PubMed

Peters, Sinead E; Brennan, Patrick C

2002-09-01

Manufacturers offer exposure indices as a safeguard against overexposure in computed radiography, but the basis for recommended values is unclear. This study establishes an optimum exposure index to be used as a guideline for a specific CR system to minimise radiation exposures for computed mobile chest radiography, and compares this with manufacturer guidelines and current practice. An anthropomorphic phantom was employed to establish the minimum milliamperes consistent with acceptable image quality for mobile chest radiography images. This was found to be 2 mAs. Consecutively, 10 patients were exposed with this optimised milliampere value and 10 patients were exposed with the 3.2 mAs routinely used in the department of the study. Image quality was objectively assessed using anatomical criteria. Retrospective analyses of 717 exposure indices recorded over 2 months from mobile chest examinations were performed. The optimised milliampere value provided a significant reduction of the average exposure index from 1840 to 1570 ( p<0.0001). This new "optimum" exposure index is substantially lower than manufacturer guidelines of 2000 and significantly lower than exposure indices from the retrospective study (1890). Retrospective data showed a significant increase in exposure indices if the examination was performed out of hours. The data provided by this study emphasise the need for clinicians and personnel to consider establishing their own optimum exposure indices for digital investigations rather than simply accepting manufacturers' guidelines. Such an approach, along with regular monitoring of indices, may result in a substantial reduction in patient exposure.

USTC & TBA Guidelines for Tennis Court & Running Track Construction.

ERIC Educational Resources Information Center

United States Tennis Court & Track Builders Association.

Guidelines are presented on tennis court and track and field construction that reflect the latest developments in construction technology, methodology, and practice. Based on contributions from experienced certified tennis court and track builders, material suppliers and design professionals, this manual examines each of the critical areas of…

49 CFR 40.33 - What training requirements must a collector meet?

Code of Federal Regulations, 2012 CFR

2012-10-01

... TRANSPORTATION WORKPLACE DRUG AND ALCOHOL TESTING PROGRAMS Urine Collection Personnel § 40.33 What training... about this part, the current “DOT Urine Specimen Collection Procedures Guidelines,” and DOT agency... changes to these materials. The DOT Urine Specimen Collection Procedures Guidelines document is available...

49 CFR 40.33 - What training requirements must a collector meet?

Code of Federal Regulations, 2013 CFR

2013-10-01

... TRANSPORTATION WORKPLACE DRUG AND ALCOHOL TESTING PROGRAMS Urine Collection Personnel § 40.33 What training... about this part, the current “DOT Urine Specimen Collection Procedures Guidelines,” and DOT agency... changes to these materials. The DOT Urine Specimen Collection Procedures Guidelines document is available...

49 CFR 40.33 - What training requirements must a collector meet?

Code of Federal Regulations, 2011 CFR

2011-10-01

... TRANSPORTATION WORKPLACE DRUG AND ALCOHOL TESTING PROGRAMS Urine Collection Personnel § 40.33 What training... about this part, the current “DOT Urine Specimen Collection Procedures Guidelines,” and DOT agency... changes to these materials. The DOT Urine Specimen Collection Procedures Guidelines document is available...

49 CFR 40.33 - What training requirements must a collector meet?

Code of Federal Regulations, 2010 CFR

2010-10-01

... TRANSPORTATION WORKPLACE DRUG AND ALCOHOL TESTING PROGRAMS Urine Collection Personnel § 40.33 What training... about this part, the current “DOT Urine Specimen Collection Procedures Guidelines,” and DOT agency... changes to these materials. The DOT Urine Specimen Collection Procedures Guidelines document is available...

49 CFR 40.33 - What training requirements must a collector meet?

Code of Federal Regulations, 2014 CFR

2014-10-01

... TRANSPORTATION WORKPLACE DRUG AND ALCOHOL TESTING PROGRAMS Urine Collection Personnel § 40.33 What training... about this part, the current “DOT Urine Specimen Collection Procedures Guidelines,” and DOT agency... changes to these materials. The DOT Urine Specimen Collection Procedures Guidelines document is available...

Guidelines for detection, analysis, and treatment of materials-related distress in concrete pavements. Volume 2, Guidelines description and use

DOT National Transportation Integrated Search

2002-08-01

The performance of concrete pavements can be adversely affected by the concrete's inability to resist the environment in which it is placed. This lack of durability can occur even when the structural design of the pavement is adequate. The distresses...

40 CFR 799.9325 - TSCA 90-day dermal toxicity.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Health Effects Test Guidelines § 799.9325 TSCA 90-day dermal toxicity. (a) Scope. This section is...-observed-effects level (NOEL) and toxic effects associated with continuous or repeated exposure to a test... human exposure. (b) Source. The source material used in developing this TSCA test guideline is the...

40 CFR 799.9325 - TSCA 90-day dermal toxicity.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Health Effects Test Guidelines § 799.9325 TSCA 90-day dermal toxicity. (a) Scope. This section is...-observed-effects level (NOEL) and toxic effects associated with continuous or repeated exposure to a test... human exposure. (b) Source. The source material used in developing this TSCA test guideline is the...

40 CFR 799.9325 - TSCA 90-day dermal toxicity.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Health Effects Test Guidelines § 799.9325 TSCA 90-day dermal toxicity. (a) Scope. This section is...-observed-effects level (NOEL) and toxic effects associated with continuous or repeated exposure to a test... human exposure. (b) Source. The source material used in developing this TSCA test guideline is the...

40 CFR 799.9325 - TSCA 90-day dermal toxicity.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Health Effects Test Guidelines § 799.9325 TSCA 90-day dermal toxicity. (a) Scope. This section is...-observed-effects level (NOEL) and toxic effects associated with continuous or repeated exposure to a test... human exposure. (b) Source. The source material used in developing this TSCA test guideline is the...

40 CFR 799.9325 - TSCA 90-day dermal toxicity.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Health Effects Test Guidelines § 799.9325 TSCA 90-day dermal toxicity. (a) Scope. This section is...-observed-effects level (NOEL) and toxic effects associated with continuous or repeated exposure to a test... human exposure. (b) Source. The source material used in developing this TSCA test guideline is the...

Individualized Learning Course Evaluation Guidelines.

ERIC Educational Resources Information Center

Bauer, Barbara T.; Everett, Robert L.

These guidelines provide standards for evaluators to estimate the quality of courses being considered for use in the Individualized Learning Center at Bell Telephone Laboratories. There are three parts. Part I guides the course evaluator through the evaluation of course materials, including course design and structure implementation. Part II is a…

Training Strategies and Materials : Use of Flashing Yellow Operations to Improve Safety at Signals with Protected-Permissive Left Turn (PPLT) Operations

DOT National Transportation Integrated Search

2012-08-01

TxDOT project 0-6568 Use of Flashing Yellow Operations to Improve Safety at Signals with : Protected-Permissive Left Turn (PPLT) Operations has developed guidelines for : implementation of FYA PPLT displays including general guidelines on the F...

Writing about Clients: Developing Composite Case Material and Its Rationale

ERIC Educational Resources Information Center

Duffy, Maureen

2010-01-01

Ethical guidelines of the 4 major professional associations representing counselors and psychotherapists are reviewed. To help clarify thinking about writing up clinical cases, 3 kinds of cases are described. The author concludes that the current guidelines for clinician authors in writing about clients for publication or presentation are…

Pilot Guidelines for Improving Instructional Materials Through the Process of Learner Verification and Revision.

ERIC Educational Resources Information Center

Educational Products Information Exchange Inst., Stony Brook, NY.

Learner Verification and Revision (LVR) Process of Instructional Materials is an ongoing effort for the improvement of instructional materials based on systematic feedback from learners who have used the materials. This evaluation gives publishers a method of identifying instructional strengths and weaknesses of a product and provides an…

Engineering handbook on the atmospheric environmental guidelines for use in wind turbine generator development

NASA Technical Reports Server (NTRS)

Frost, W.; Long, B. H.; Turner, R. E.

1978-01-01

The guidelines are given in the form of design criteria relative to wind speed, wind shear, turbulence, wind direction, ice and snow loading, and other climatological parameters which include rain, hail, thermal effects, abrasive and corrosive effects, and humidity. This report is a presentation of design criteria in an engineering format which can be directly input to wind turbine generator design computations. Guidelines are also provided for developing specialized wind turbine generators or for designing wind turbine generators which are to be used in a special region of the United States.

48 CFR 1652.203-70 - Misleading, deceptive, or unfair advertising.

Code of Federal Regulations, 2012 CFR

2012-10-01

... labeled promotional material, marketing material, or supplemental literature, shall be truthful and not... Supplemental Literature Guidelines which are developed by OPM and should be used, along with the additional...

48 CFR 1652.203-70 - Misleading, deceptive, or unfair advertising.

Code of Federal Regulations, 2011 CFR

2011-10-01

... labeled promotional material, marketing material, or supplemental literature, shall be truthful and not... Supplemental Literature Guidelines which are developed by OPM and should be used, along with the additional...

48 CFR 1652.203-70 - Misleading, deceptive, or unfair advertising.

Code of Federal Regulations, 2014 CFR

2014-10-01

... labeled promotional material, marketing material, or supplemental literature, shall be truthful and not... Supplemental Literature Guidelines which are developed by OPM and should be used, along with the additional...

Towards Reproducible Descriptions of Neuronal Network Models

PubMed Central

Nordlie, Eilen; Gewaltig, Marc-Oliver; Plesser, Hans Ekkehard

2009-01-01

Progress in science depends on the effective exchange of ideas among scientists. New ideas can be assessed and criticized in a meaningful manner only if they are formulated precisely. This applies to simulation studies as well as to experiments and theories. But after more than 50 years of neuronal network simulations, we still lack a clear and common understanding of the role of computational models in neuroscience as well as established practices for describing network models in publications. This hinders the critical evaluation of network models as well as their re-use. We analyze here 14 research papers proposing neuronal network models of different complexity and find widely varying approaches to model descriptions, with regard to both the means of description and the ordering and placement of material. We further observe great variation in the graphical representation of networks and the notation used in equations. Based on our observations, we propose a good model description practice, composed of guidelines for the organization of publications, a checklist for model descriptions, templates for tables presenting model structure, and guidelines for diagrams of networks. The main purpose of this good practice is to trigger a debate about the communication of neuronal network models in a manner comprehensible to humans, as opposed to machine-readable model description languages. We believe that the good model description practice proposed here, together with a number of other recent initiatives on data-, model-, and software-sharing, may lead to a deeper and more fruitful exchange of ideas among computational neuroscientists in years to come. We further hope that work on standardized ways of describing—and thinking about—complex neuronal networks will lead the scientific community to a clearer understanding of high-level concepts in network dynamics, and will thus lead to deeper insights into the function of the brain. PMID:19662159

77 FR 20886 - Proposed Information Collection (Advertising, Sales, and Enrollment Materials, and Candidate...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-06

... information needed to ensure that educational institutions or agents enrollment materials meet VA's guidelines... information technology. Title: Advertising, Sales, and Enrollment Materials, and Candidate Handbooks, 38 CFR... collection. Abstract: VA approved educational institutions offering courses approved for the enrollment of...

Material Writer's Guide.

ERIC Educational Resources Information Center

Byrd, Patricia, Ed.

This guide is a collection of essays on the writing of English-as-a-Second-Language (ESL) textbooks and other instructional materials. Articles include: "Writing and Publishing Textbooks (Patricia Byrd); "The Craft of Materials Writing" (Fraida Dubin); "Considering Culture: Guidelines for ESL/EFL Textbook Writers" (Gayle Nelson); "Issues in the…

Applying openEHR's Guideline Definition Language to the SITS international stroke treatment registry: a European retrospective observational study.

PubMed

Anani, Nadim; Mazya, Michael V; Chen, Rong; Prazeres Moreira, Tiago; Bill, Olivier; Ahmed, Niaz; Wahlgren, Nils; Koch, Sabine

2017-01-10

Interoperability standards intend to standardise health information, clinical practice guidelines intend to standardise care procedures, and patient data registries are vital for monitoring quality of care and for clinical research. This study combines all three: it uses interoperability specifications to model guideline knowledge and applies the result to registry data. We applied the openEHR Guideline Definition Language (GDL) to data from 18,400 European patients in the Safe Implementation of Treatments in Stroke (SITS) registry to retrospectively check their compliance with European recommendations for acute stroke treatment. Comparing compliance rates obtained with GDL to those obtained by conventional statistical data analysis yielded a complete match, suggesting that GDL technology is reliable for guideline compliance checking. The successful application of a standard guideline formalism to a large patient registry dataset is an important step toward widespread implementation of computer-interpretable guidelines in clinical practice and registry-based research. Application of the methodology gave important results on the evolution of stroke care in Europe, important both for quality of care monitoring and clinical research.

Does intravenous contrast-enhanced computed tomography cause acute kidney injury? Protocol of a systematic review of the evidence

PubMed Central

2014-01-01

Background Contrast-induced acute kidney injury is a common cause of iatrogenic acute kidney injury (AKI). Most of the published estimates of AKI after contrast use originate from the cardiac catheterization literature despite contrast-enhanced computed tomography (CT) scans being the more common setting for contrast use. This systematic review aims to summarize the current evidence about (1)the risk of AKI following intravenous (IV) contrast-enhanced CT scans and(2) the risk of clinical outcomes (i.e. death, hospitalization and need for renal replacement therapy) due to IV contrast-enhanced CT scans. Methods/Design A systematic literature search for published studies will be performed using MEDLINE, EMBASE and The COCHRANE Library databases. Unpublished studies will be identified by searching through grey literature. No language restriction will be applied. The review will consider all studies that have examined the association between IV contrast media and AKI. To be selected, the study should include two arms: one group of exposed patients who received IV contrast material before CT scans and one group of unexposed group who did not receive contrast material before CT scans. Two authors will independently screen titles and abstracts obtained from electronic databases, extract data and will assess the quality of the studies selected using the Cochrane's ‘Risk of Bias’ assessment tool for randomized trials and the Newcastle-Ottawa Scale for observational studies. A random-effects meta-analysis will be performed if there is no remarkable heterogeneity between studies. Discussion This systematic review will provide synthesis of current evidence around the effect of IV contrast material on AKI and other clinical outcomes. Results will be helpful for making evidence-based recommendations and guidelines for clinical and radiologic settings. Systematic review registration PROSPERO CRD42013003799. PMID:25148933

When cloud computing meets bioinformatics: a review.

PubMed

Zhou, Shuigeng; Liao, Ruiqi; Guan, Jihong

2013-10-01

In the past decades, with the rapid development of high-throughput technologies, biology research has generated an unprecedented amount of data. In order to store and process such a great amount of data, cloud computing and MapReduce were applied to many fields of bioinformatics. In this paper, we first introduce the basic concepts of cloud computing and MapReduce, and their applications in bioinformatics. We then highlight some problems challenging the applications of cloud computing and MapReduce to bioinformatics. Finally, we give a brief guideline for using cloud computing in biology research.

Long Duration Exposure Facility mini-data base user`s guide: IBM-compatible PC computer version. (Diskette)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bohnhoff-Hlavacek, G.; Pippin, G.; Dursch, H.

1995-04-01

One of the objectives of the LDEF Special Investigation Group (SIG) was to develop a LDEF data base that identifies the experiment objectives and hardware flown, summarizes results and conclusions, and provides a system analysis overview which would include spacecraft design guidelines and space environmental effects. Compiling this information into an easily accessible data base format and making it available to the space community was a major task accomplished by the System and Materials SIG effort beginning in 1991. Included in this document is a short user`s manual for the LDEF Mini-Data Bases. The user`s manual contains pertinent examples frommore » the data base on specifically how to access and work with the LDEF information. Accompanying this document are the mini-data bases on disk.« less

Spin Hall Effect and Weak Antilocalization in Graphene/Transition Metal Dichalcogenide Heterostructures.

PubMed

Garcia, Jose H; Cummings, Aron W; Roche, Stephan

2017-08-09

We report on a theoretical study of the spin Hall Effect (SHE) and weak antilocalization (WAL) in graphene/transition metal dichalcogenide (TMDC) heterostructures, computed through efficient real-space quantum transport methods, and using realistic tight-binding models parametrized from ab initio calculations. The graphene/WS 2 system is found to maximize spin proximity effects compared to graphene on MoS 2 , WSe 2 , or MoSe 2 with a crucial role played by disorder, given the disappearance of SHE signals in the presence of strong intervalley scattering. Notably, we found that stronger WAL effects are concomitant with weaker charge-to-spin conversion efficiency. For further experimental studies of graphene/TMDC heterostructures, our findings provide guidelines for reaching the upper limit of spin current formation and for fully harvesting the potential of two-dimensional materials for spintronic applications.

17 CFR Appendix A to Part 40 - Guideline No. 1

Code of Federal Regulations, 2010 CFR

2010-04-01

... in normal cash marketing channels. For purposes of this demonstration, provide the following... marketing materials prepared by or for the board of trade; reports of consultants; or other materials which...

Computational methods for 2D materials: discovery, property characterization, and application design.

PubMed

Paul, J T; Singh, A K; Dong, Z; Zhuang, H; Revard, B C; Rijal, B; Ashton, M; Linscheid, A; Blonsky, M; Gluhovic, D; Guo, J; Hennig, R G

2017-11-29

The discovery of two-dimensional (2D) materials comes at a time when computational methods are mature and can predict novel 2D materials, characterize their properties, and guide the design of 2D materials for applications. This article reviews the recent progress in computational approaches for 2D materials research. We discuss the computational techniques and provide an overview of the ongoing research in the field. We begin with an overview of known 2D materials, common computational methods, and available cyber infrastructures. We then move onto the discovery of novel 2D materials, discussing the stability criteria for 2D materials, computational methods for structure prediction, and interactions of monolayers with electrochemical and gaseous environments. Next, we describe the computational characterization of the 2D materials' electronic, optical, magnetic, and superconducting properties and the response of the properties under applied mechanical strain and electrical fields. From there, we move on to discuss the structure and properties of defects in 2D materials, and describe methods for 2D materials device simulations. We conclude by providing an outlook on the needs and challenges for future developments in the field of computational research for 2D materials.

Supporting Reporting: On the Positive Effects of Text- and Video-Based Awareness Material on Responsible Journalistic Suicide News Writing.

PubMed

Scherr, Sebastian; Arendt, Florian; Schäfer, Markus

2017-01-01

Suicide is a global public health problem. Media impact on suicide is well confirmed and there are several recommendations on how media should and should not report on suicide to minimize the risk of copycat behavior. Those media guidelines have been developed to improve responsible reporting on suicide (RRS). Although such guidelines are used in several countries, we lack empirical evidence on their causal effect on actual journalistic news writing. We conducted an experiment with journalism students (N = 78) in Germany in which we tested whether exposure to awareness material promoting RRS influences news writing. As a supplement to the widely used text-based material, we tested the impact of a video in which a suicide expert presents the guidelines. A video was used as a supplement to text partly due to its potential benefit for prevention efforts over the Internet. We chose a low-budget production process allowing easy reproduction in different countries by local suicide experts. In the experiment, participants were either exposed to written, audio-visual, or no awareness material. Afterwards, participants read numerous facts of an ostensible suicide event and were asked to write a factual suicide news story based on these facts. Analyses indicate that awareness material exposure helped to improve RRS with the awareness video showing the strongest effects. We recommend that suicide prevention should use instructive awareness videos about RRS complementary to text-based awareness material.

Creating Shareable Clinical Decision Support Rules for a Pharmacogenomics Clinical Guideline Using Structured Knowledge Representation.

PubMed

Linan, Margaret K; Sottara, Davide; Freimuth, Robert R

2015-01-01

Pharmacogenomics (PGx) guidelines contain drug-gene relationships, therapeutic and clinical recommendations from which clinical decision support (CDS) rules can be extracted, rendered and then delivered through clinical decision support systems (CDSS) to provide clinicians with just-in-time information at the point of care. Several tools exist that can be used to generate CDS rules that are based on computer interpretable guidelines (CIG), but none have been previously applied to the PGx domain. We utilized the Unified Modeling Language (UML), the Health Level 7 virtual medical record (HL7 vMR) model, and standard terminologies to represent the semantics and decision logic derived from a PGx guideline, which were then mapped to the Health eDecisions (HeD) schema. The modeling and extraction processes developed here demonstrate how structured knowledge representations can be used to support the creation of shareable CDS rules from PGx guidelines.

Guidelines for testing and release procedures

NASA Technical Reports Server (NTRS)

Molari, R.; Conway, M.

1984-01-01

Guidelines and procedures are recommended for the testing and release of the types of computer software efforts commonly performed at NASA/Ames Research Center. All recommendations are based on the premise that testing and release activities must be specifically selected for the environment, size, and purpose of each individual software project. Guidelines are presented for building a Test Plan and using formal Test Plan and Test Care Inspections on it. Frequent references are made to NASA/Ames Guidelines for Software Inspections. Guidelines are presented for selecting an Overall Test Approach and for each of the four main phases of testing: (1) Unit Testing of Components, (2) Integration Testing of Components, (3) System Integration Testing, and (4) Acceptance Testing. Tools used for testing are listed, including those available from operating systems used at Ames, specialized tools which can be developed, unit test drivers, stub module generators, and the use of format test reporting schemes.

Comparison of and conversion between different implementations of the FORTRAN programming language

NASA Technical Reports Server (NTRS)

Treinish, L.

1980-01-01

A guideline for computer programmers who may need to exchange FORTRAN programs between several computers is presented. The characteristics of the FORTRAN language available on three different types of computers are outlined, and procedures and other considerations for the transfer of programs from one type of FORTRAN to another are discussed. In addition, the variance of these different FORTRAN's from the FORTRAN 77 standard are discussed.

Human-Computer Interaction and Virtual Environments

NASA Technical Reports Server (NTRS)

Noor, Ahmed K. (Compiler)

1995-01-01

The proceedings of the Workshop on Human-Computer Interaction and Virtual Environments are presented along with a list of attendees. The objectives of the workshop were to assess the state-of-technology and level of maturity of several areas in human-computer interaction and to provide guidelines for focused future research leading to effective use of these facilities in the design/fabrication and operation of future high-performance engineering systems.

A pattern-based analysis of clinical computer-interpretable guideline modeling languages.

PubMed

Mulyar, Nataliya; van der Aalst, Wil M P; Peleg, Mor

2007-01-01

Languages used to specify computer-interpretable guidelines (CIGs) differ in their approaches to addressing particular modeling challenges. The main goals of this article are: (1) to examine the expressive power of CIG modeling languages, and (2) to define the differences, from the control-flow perspective, between process languages in workflow management systems and modeling languages used to design clinical guidelines. The pattern-based analysis was applied to guideline modeling languages Asbru, EON, GLIF, and PROforma. We focused on control-flow and left other perspectives out of consideration. We evaluated the selected CIG modeling languages and identified their degree of support of 43 control-flow patterns. We used a set of explicitly defined evaluation criteria to determine whether each pattern is supported directly, indirectly, or not at all. PROforma offers direct support for 22 of 43 patterns, Asbru 20, GLIF 17, and EON 11. All four directly support basic control-flow patterns, cancellation patterns, and some advance branching and synchronization patterns. None support multiple instances patterns. They offer varying levels of support for synchronizing merge patterns and state-based patterns. Some support a few scenarios not covered by the 43 control-flow patterns. CIG modeling languages are remarkably close to traditional workflow languages from the control-flow perspective, but cover many fewer workflow patterns. CIG languages offer some flexibility that supports modeling of complex decisions and provide ways for modeling some decisions not covered by workflow management systems. Workflow management systems may be suitable for clinical guideline applications.

Proyecto Leer Bulletin, Number 9.

ERIC Educational Resources Information Center

Benson, Susan Shattuck

This bulletin lists addresses of publishers and distributors of audiovisual instructional materials in Spanish in the United States and Latin America. Sources are listed in four categories: (1) federal sources of materials, information on materials, names of resource people, programs, and proposal guidelines concerning the Spanish speaking; (2)…

An Examination of Existing Guidelines for Programs for the Preservice and Inservice Education of Teachers in Metric Education and the Modification of These and the Development of New Ones if Deemed Necessary. Final Report of Objective No. 3.

ERIC Educational Resources Information Center

Granito, Dolores

These guidelines for in-service and preservice teacher education related to the conversion to the metric system were developed from a survey of published materials, university faculty, and mathematics supervisors. The eleven guidelines fall into three major categories: (1) design of teacher training programs, (2) teacher training, and (3)…

International Spine Radiosurgery Consortium Consensus Guidelines for Target Volume Definition in Spinal Stereotactic Radiosurgery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cox, Brett W., E-mail: coxb@mskcc.org; Spratt, Daniel E.; Lovelock, Michael

2012-08-01

Purpose: Spinal stereotactic radiosurgery (SRS) is increasingly used to manage spinal metastases. However, target volume definition varies considerably and no consensus target volume guidelines exist. This study proposes consensus target volume definitions using common scenarios in metastatic spine radiosurgery. Methods and Materials: Seven radiation oncologists and 3 neurological surgeons with spinal radiosurgery expertise independently contoured target and critical normal structures for 10 cases representing common scenarios in metastatic spine radiosurgery. Each set of volumes was imported into the Computational Environment for Radiotherapy Research. Quantitative analysis was performed using an expectation maximization algorithm for Simultaneous Truth and Performance Level Estimation (STAPLE)more » with kappa statistics calculating agreement between physicians. Optimized confidence level consensus contours were identified using histogram agreement analysis and characterized to create target volume definition guidelines. Results: Mean STAPLE agreement sensitivity and specificity was 0.76 (range, 0.67-0.84) and 0.97 (range, 0.94-0.99), respectively, for gross tumor volume (GTV) and 0.79 (range, 0.66-0.91) and 0.96 (range, 0.92-0.98), respectively, for clinical target volume (CTV). Mean kappa agreement was 0.65 (range, 0.54-0.79) for GTV and 0.64 (range, 0.54-0.82) for CTV (P<.01 for GTV and CTV in all cases). STAPLE histogram agreement analysis identified optimal consensus contours (80% confidence limit). Consensus recommendations include that the CTV should include abnormal marrow signal suspicious for microscopic invasion and an adjacent normal bony expansion to account for subclinical tumor spread in the marrow space. No epidural CTV expansion is recommended without epidural disease, and circumferential CTVs encircling the cord should be used only when the vertebral body, bilateral pedicles/lamina, and spinous process are all involved or there is extensive metastatic disease along the circumference of the epidural space. Conclusions: This report provides consensus guidelines for target volume definition for spinal metastases receiving upfront SRS in common clinical situations.« less

ERIC Processing Manual. Rules and Guidelines for the Acquisition, Selection, and Technical Processing of Documents and Journal Articles by the Various Components of the ERIC Network.

ERIC Educational Resources Information Center

Brandhorst, Ted, Ed.; And Others

This loose-leaf manual provides the detailed rules, guidelines, and examples to be used by the components of the Educational Resources Information Center (ERIC) Network in acquiring and selecting documents and in processing them (i.e., cataloging, indexing, abstracting) for input to the ERIC computer system and subsequent announcement in…

From Specific Information Extraction to Inferences: A Hierarchical Framework of Graph Comprehension

DTIC Science & Technology

2004-09-01

The skill to interpret the information displayed in graphs is so important to have, the National Council of Teachers of Mathematics has created...guidelines to ensure that students learn these skills ( NCTM : Standards for Mathematics , 2003). These guidelines are based primarily on the extraction of...graphical perception. Human Computer Interaction, 8, 353-388. NCTM : Standards for Mathematics . (2003, 2003). Peebles, D., & Cheng, P. C.-H. (2002

Whole body computed tomography for trauma patients in the Nordic countries 2014: survey shows significant differences and a need for common guidelines.

PubMed

Wiklund, E; Koskinen, S K; Linder, F; Åslund, P-E; Eklöf, H

2016-06-01

Whole body computed tomography in trauma (WBCTT) is a standardized CT examination of trauma patients. It has a relatively high radiation dose. Therefore, well-defined clinical indications and imaging protocols are needed. This information regarding Nordic countries is limited. To identify Nordic countries' WBCTT imaging protocols, radiation dose, and integration in trauma care, and to inquire about the need for common Nordic guidelines. A survey with 23 multiple choice questions or free text responses was sent to 95 hospitals and 10 trauma centers in and outside the Nordic region, respectively. The questions were defined and the hospitals selected in collaboration with board members of "Nordic Forum for Trauma and Emergency Radiology" (www.nordictraumarad.com). Two Nordic hospitals declined to take part in the survey. Out of the remaining 93 Nordic hospitals, 56 completed the questionnaire. Arterial visualization is routine in major trauma centers but only in 50% of the Nordic hospitals. The CT scanner is located within 50 m of the emergency department in all non-Nordic trauma centers but only in 60% of Nordic hospitals. Radiation dose for WBCTT is in the range of 900-3600 mGy × cm. Of the 56 responding Nordic hospitals, 84% have official guidelines for WBCTT. Eighty-nine percent of the responders state there is a need for common guidelines. Scanning protocols, radiation doses, and routines differ significantly between hospitals and trauma centers. Guideline for WBCTT is presently defined locally in most Nordic hospitals. There is an interest in most Nordic hospitals to endorse new and common guidelines for WBCTT. © The Foundation Acta Radiologica 2015.

Secure and robust cloud computing for high-throughput forensic microsatellite sequence analysis and databasing.

PubMed

Bailey, Sarah F; Scheible, Melissa K; Williams, Christopher; Silva, Deborah S B S; Hoggan, Marina; Eichman, Christopher; Faith, Seth A

2017-11-01

Next-generation Sequencing (NGS) is a rapidly evolving technology with demonstrated benefits for forensic genetic applications, and the strategies to analyze and manage the massive NGS datasets are currently in development. Here, the computing, data storage, connectivity, and security resources of the Cloud were evaluated as a model for forensic laboratory systems that produce NGS data. A complete front-to-end Cloud system was developed to upload, process, and interpret raw NGS data using a web browser dashboard. The system was extensible, demonstrating analysis capabilities of autosomal and Y-STRs from a variety of NGS instrumentation (Illumina MiniSeq and MiSeq, and Oxford Nanopore MinION). NGS data for STRs were concordant with standard reference materials previously characterized with capillary electrophoresis and Sanger sequencing. The computing power of the Cloud was implemented with on-demand auto-scaling to allow multiple file analysis in tandem. The system was designed to store resulting data in a relational database, amenable to downstream sample interpretations and databasing applications following the most recent guidelines in nomenclature for sequenced alleles. Lastly, a multi-layered Cloud security architecture was tested and showed that industry standards for securing data and computing resources were readily applied to the NGS system without disadvantageous effects for bioinformatic analysis, connectivity or data storage/retrieval. The results of this study demonstrate the feasibility of using Cloud-based systems for secured NGS data analysis, storage, databasing, and multi-user distributed connectivity. Copyright © 2017 Elsevier B.V. All rights reserved.

Preparing Students for Computer Aided Drafting (CAD). A Conceptual Approach.

ERIC Educational Resources Information Center

Putnam, A. R.; Duelm, Brian

This presentation outlines guidelines for developing and implementing an introductory course in computer-aided drafting (CAD) that is geared toward secondary-level students. The first section of the paper, which deals with content identification and selection, includes lists of mechanical drawing and CAD competencies and a list of rationales for…

Some Specifications for a Computer-Oriented First Course in Electrical Engineering.

ERIC Educational Resources Information Center

Commission on Engineering Education, Washington, DC.

Reported are specifications for a computer-oriented first course in electrical engineering giving new direction to the development of texts and alternative courses of study. Guidelines for choice of topics, a statement of fundamental concepts, pitfalls to avoid, and some sample course outlines are given. The study of circuits through computer…

NRC Class 1E Digital Computer System Guidelines

DTIC Science & Technology

1993-05-01

then be "proved" that the vessel cannot be at high temperature state and norma ! t emperature state at the same time. The question whether high, normal...3 of Dependability of critical computer systems. Elsever Applied Science, 1988. [18] J. W. Duran and S. C. Ntafos, "A report on random testing," in

Personnel Training--Secondary Vocational Agriculture Teacher Education.

ERIC Educational Resources Information Center

Brown, Herman D.; And Others

This document consists of three parts. The first part is a report on a project conducted to develop computer software needed by vocational agriculture teachers in Texas. The report details the process used to assess and develop software, and provides guidelines that can be used by others in evaluating computer software for vocational agriculture…

Toward a New Model of Usability: Guidelines for Selecting Reading Fluency Apps Suitable for Instruction of Struggling Readers

ERIC Educational Resources Information Center

Rinehart, Steven D.; Ahern, Terence C.

2016-01-01

Computer applications related to reading instruction have become commonplace in schools and link with established components of the reading process, emergent skills, decoding, comprehension, vocabulary, and fluency. This article focuses on computer technology in conjunction with durable methods for building oral reading fluency when readers…

Motivational Screen Design Guidelines for Effective Computer-Mediated Instruction.

ERIC Educational Resources Information Center

Lee, Sung Heum; Boling, Elizabeth

Screen designers for computer-mediated instruction (CMI) products must consider the motivational appeal of their designs. Although learners may be motivated to use CMI programs initially because of their novelty, this effect wears off and the instruction must stand on its own. Instructional screens must provide effective and efficient instruction,…

The Effectiveness of Computer-Based Cognitive Training Programs

ERIC Educational Resources Information Center

Walcott, Christy M.; Phillips, Miranda E.

2013-01-01

The purpose of this article is to summarize empirical findings for school-age computer-based cognitive training (CCT) programs and to provide specific guidelines to practitioners who may be consulting with parents and schools about the utility of such programs. CCT programs vary in nature and in their targeted functions, but they share similar…

"A Technical Assistance Report" on Computer Technology Applications. Smithville School District, Smithville, Massachusetts.

ERIC Educational Resources Information Center

Merrimack Education Center, Chelmsford, MA.

This report of the Technical Assistance Study provided to the Smithville Public Schools by the Technology Lighthouse of the Merrimack Education Center offers information for use in planning computer technology applications over a 3-year period. It provides specific guidelines and criteria for planning and development, equipment considerations,…

76 FR 1559 - Guidelines for the Use of Electronic Voting Systems in Union Officer Elections

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-11

... voting. Id. However, there are still concerns regarding on-line computer security, viruses and attacks... casting votes at polling sites; electronic voting from remote site personal computers via the Internet..., Washington, DC 20210. Because of security precautions, the Department continues to experience delays in U.S...

Computer applications for the hospital security department--buying or developing a shift log reporting system.

PubMed

Gruber, T

1996-01-01

The author presents guidelines to help a security department select a computer system to track security activities--whether it's a commercial software product, an in-house developed program, or a do-it-yourself designed system. Computerized security activity reporting, he believes, is effective and beneficial.

A Placement Test for Computer Science: Design, Implementation, and Analysis

ERIC Educational Resources Information Center

Nugent, Gwen; Soh, Leen-Kiat; Samal, Ashok; Lang, Jeff

2006-01-01

An introductory CS1 course presents problems for educators and students due to students' diverse background in programming knowledge and exposure. Students who enroll in CS1 also have different expectations and motivations. Prompted by the curricular guidelines for undergraduate programmes in computer science released in 2001 by the ACM/IEEE, and…

Computational methods for 2D materials: discovery, property characterization, and application design

NASA Astrophysics Data System (ADS)

Paul, J. T.; Singh, A. K.; Dong, Z.; Zhuang, H.; Revard, B. C.; Rijal, B.; Ashton, M.; Linscheid, A.; Blonsky, M.; Gluhovic, D.; Guo, J.; Hennig, R. G.

2017-11-01

The discovery of two-dimensional (2D) materials comes at a time when computational methods are mature and can predict novel 2D materials, characterize their properties, and guide the design of 2D materials for applications. This article reviews the recent progress in computational approaches for 2D materials research. We discuss the computational techniques and provide an overview of the ongoing research in the field. We begin with an overview of known 2D materials, common computational methods, and available cyber infrastructures. We then move onto the discovery of novel 2D materials, discussing the stability criteria for 2D materials, computational methods for structure prediction, and interactions of monolayers with electrochemical and gaseous environments. Next, we describe the computational characterization of the 2D materials’ electronic, optical, magnetic, and superconducting properties and the response of the properties under applied mechanical strain and electrical fields. From there, we move on to discuss the structure and properties of defects in 2D materials, and describe methods for 2D materials device simulations. We conclude by providing an outlook on the needs and challenges for future developments in the field of computational research for 2D materials.

Guidelines for reading literature reviews.

PubMed Central

Oxman, A D; Guyatt, G H

1988-01-01

One strategy for dealing with the burgeoning medical literature is to rely on reviews of the literature. Although this strategy is efficient, readers may be misled if the review does not meet scientific standards. Therefore, guidelines that will help readers assess the scientific quality of the review are proposed. The guidelines focus on the definition of the question, the comprehensiveness of the search strategy, the methods of choosing and assessing the primary studies, and the methods of combining the results and reaching appropriate conclusions. Application of the guidelines will allow clinicians to spend their valuable reading time on high-quality material and to judge the validity of an author's conclusions. PMID:3355948

Development and Exchange of Instructional Resources in Water Quality Control Programs, II: Instructional Materials Available.

ERIC Educational Resources Information Center

Austin, John H.

This document is one in a series of reports which reviews instructional materials and equipment for water and wastewater treatment plant personnel. Approximately 900 items are listed in this document along with guidelines for the production of instructional materials. Information is provided regarding the source, type of material, intended…

Guidelines for School-Based Alcohol and Drug Abuse Prevention Programs.

ERIC Educational Resources Information Center

California State Dept. of Education, Sacramento.

This paper contains the revised drug education guidelines for the state of California, which emphasize prevention of alcohol and drug abuse. The materials define school-based alcohol and drug abuse prevention programming as a comprehensive process that not only provides students with accurate information about alcohol and drugs, but also enhances…

Price Estimation Guidelines

NASA Technical Reports Server (NTRS)

Chamberlain, R. G.; Aster, R. W.; Firnett, P. J.; Miller, M. A.

1985-01-01

Improved Price Estimation Guidelines, IPEG4, program provides comparatively simple, yet relatively accurate estimate of price of manufactured product. IPEG4 processes user supplied input data to determine estimate of price per unit of production. Input data include equipment cost, space required, labor cost, materials and supplies cost, utility expenses, and production volume on industry wide or process wide basis.

Guidelines for the Selection of Topical Content in ESL Programs

ERIC Educational Resources Information Center

Deckert, Glenn

2004-01-01

The author contends that the topical content of ESL lesson materials in schools and universities is of ethical significance. Based on an established model for ethical judgment in social services, five guidelines for ethical selection of lesson topics are proposed and illustrated. Lesson topics must help ESL students: (a) adjust to local…

Report and Guidelines for the Development of Communications Campaigns.

ERIC Educational Resources Information Center

Tisa, Benedict

The purpose of the document is to present ideas as guidelines for developing communication strategies to use in promoting change in rural Bangladesh villages. It gives hypothetical examples to show how communication material can be developed; offers a schematic design meant to show how communications personnel can function within the framework of…

Marketing. Retailing 102, Promotions 202, Relations in Business 202, Management 302, Marketing Practicum 302.

ERIC Educational Resources Information Center

Manitoba Dept. of Education, Winnipeg.

This teaching guide contains guidelines for conducting five secondary-level marketing cluster courses--Retailing 102, Promotions 202, Relations in Business 202, Management 302, and Marketing Practicum 302. Covered first are goals and objectives, teachers' notes and suggested activities, lists of suggested materials, and guidelines for correlating…

Guidelines for detection, analysis, and treatment of materials-related distress in concrete pavements, volume 3 : case studies using the guidelines.

DOT National Transportation Integrated Search

2002-08-01

The performance of concrete pavements can be adversely affected by the concrete's inability to resist the environment in : which it is placed. This lack of durability can occur even when the structural design of the pavement is adequate. The : distre...

La Administracion de las Bibliotecas Escolares (School Library Administration). IFLA Professional Reports, No. 29.

ERIC Educational Resources Information Center

Galler, Anne M.; Coulter, Joan M.

This manual provides practical information on the planning, organization, and operation of school libraries. Some of the guidelines differentiate between small libraries with minimal collections and larger, better-equipped libraries with more resources. Introductory materials include definitions of terms used in this manual. Guidelines are then…

Pedagogic Design Guidelines for Multimedia Materials: A Call for Collaboration between Practitioners and Researchers

ERIC Educational Resources Information Center

Koumi, Jack

2013-01-01

This paper argues that pedagogic efficacy of multimedia packages (interactive multimedia presentations) cannot be achieved by experimental research in the absence of a detailed pedagogical screenwriting framework. Following a summary of relevant literature, such a framework is offered, consisting of micro-level design guidelines. The guidelines…

Book Longevity. Reports of the Committee on Production Guidelines for Book Longevity.

ERIC Educational Resources Information Center

Bailey, Herbert S., Jr.; And Others

In 1979, a Committee on Production Guidelines for Book Longevity was formed to study some aspects of the book preservation problem. Composed of representatives from libraries, publishing, and the paper industry, the committee set two primary objectives: to increase knowledge about the durability of books and other materials, and to encourage…

Alternative Education Guidelines, Model Middle School Alternative Education Program. Workshop II. Prevention Programs & Funding.

ERIC Educational Resources Information Center

National Association of School Security Directors, Bellevue, WA.

These workshop materials are the guidelines Broward County (Florida) has established to carry out the state legislative mandate authorizing school boards to establish educational alternative programs to meet the individual needs and interests of students who are disruptive, unsucessful, or disinterested in the normal school environment. Included…

Improving the quality of health care: using international collaboration to inform guideline programmes by founding the Guidelines International Network (G-I-N)*

PubMed Central

Ollenschlager, G; Marshall, C; Qureshi, S; Rosenbrand, K; Burgers, J; Makela, M; Slutsky, J; t for

2004-01-01



 Clinical practice guidelines are regarded as powerful tools to achieve effective health care. Although many countries have built up experience in the development, appraisal, and implementation of guidelines, until recently there has been no established forum for collaboration at an international level. As a result, in different countries seeking similar goals and using similar strategies, efforts have been unnecessarily duplicated and opportunities for harmonisation lost because of the lack of a supporting organisational framework. This triggered a proposal in 2001 for an international guidelines network built on existing partnerships. A baseline survey confirmed a strong demand for such an entity. A multinational group of guideline experts initiated the development of a non-profit organisation aimed at promotion of systematic guideline development and implementation. The Guidelines International Network (G-I-N) was founded in November 2002. One year later the Network released the International Guideline Library, a searchable database which now contains more than 2000 guideline resources including published guidelines, guidelines under development, "guidelines for guidelines", training materials, and patient information tools. By June 2004, 52 organisations from 27 countries had joined the network including institutions from Oceania, North America, and Europe, and WHO. This paper describes the process that led to the foundation of the G-I-N, its characteristics, prime activities, and ideas on future projects and collaboration. PMID:15576708

40 CFR 411.30 - Applicability; description of the materials storage piles runoff subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CEMENT MANUFACTURING POINT SOURCE CATEGORY... products, finished products and waste materials which are used in or derived from the manufacture of cement...

40 CFR 411.30 - Applicability; description of the materials storage piles runoff subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CEMENT MANUFACTURING POINT SOURCE CATEGORY... products, finished products and waste materials which are used in or derived from the manufacture of cement...

40 CFR 411.30 - Applicability; description of the materials storage piles runoff subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CEMENT MANUFACTURING POINT SOURCE CATEGORY... products, finished products and waste materials which are used in or derived from the manufacture of cement...

40 CFR 411.30 - Applicability; description of the materials storage piles runoff subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CEMENT MANUFACTURING POINT SOURCE CATEGORY... products, finished products and waste materials which are used in or derived from the manufacture of cement...

40 CFR 411.30 - Applicability; description of the materials storage piles runoff subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CEMENT MANUFACTURING POINT SOURCE CATEGORY... products, finished products and waste materials which are used in or derived from the manufacture of cement...

Anomaly detection applied to a materials control and accounting database

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whiteson, R.; Spanks, L.; Yarbro, T.

An important component of the national mission of reducing the nuclear danger includes accurate recording of the processing and transportation of nuclear materials. Nuclear material storage facilities, nuclear chemical processing plants, and nuclear fuel fabrication facilities collect and store large amounts of data describing transactions that involve nuclear materials. To maintain confidence in the integrity of these data, it is essential to identify anomalies in the databases. Anomalous data could indicate error, theft, or diversion of material. Yet, because of the complex and diverse nature of the data, analysis and evaluation are extremely tedious. This paper describes the authors workmore » in the development of analysis tools to automate the anomaly detection process for the Material Accountability and Safeguards System (MASS) that tracks and records the activities associated with accountable quantities of nuclear material at Los Alamos National Laboratory. Using existing guidelines that describe valid transactions, the authors have created an expert system that identifies transactions that do not conform to the guidelines. Thus, this expert system can be used to focus the attention of the expert or inspector directly on significant phenomena.« less

Experimental study on tissue phantoms to understand the effect of injury and suturing on human skin mechanical properties.

PubMed

Chanda, Arnab; Unnikrishnan, Vinu; Flynn, Zachary; Lackey, Kim

2017-01-01

Skin injuries are the most common type of injuries occurring in day-to-day life. A skin injury usually manifests itself in the form of a wound or a cut. While a shallow wound may heal by itself within a short time, deep wounds require surgical interventions such as suturing for timely healing. To date, suturing practices are based on a surgeon's experience and may vary widely from one situation to another. Understanding the mechanics of wound closure and suturing of the skin is crucial to improve clinical suturing practices and also to plan automated robotic surgeries. In the literature, phenomenological two-dimensional computational skin models have been developed to study the mechanics of wound closure. Additionally, the effect of skin pre-stress (due to the natural tension of the skin) on wound closure mechanics has been studied. However, in most of these analyses, idealistic two-dimensional skin geometries, materials and loads have been assumed, which are far from reality, and would clearly generate inaccurate quantitative results. In this work, for the first time, a biofidelic human skin tissue phantom was developed using a two-part silicone material. A wound was created on the phantom material and sutures were placed to close the wound. Uniaxial mechanical tests were carried out on the phantom specimens to study the effect of varying wound size, quantity, suture and pre-stress on the mechanical behavior of human skin. Also, the average mechanical behavior of the human skin surrogate was characterized using hyperelastic material models, in the presence of a wound and sutures. To date, such a robust experimental study on the effect of injury and sutures on human skin mechanics has not been attempted. The results of this novel investigation will provide important guidelines for surgical planning and validation of results from computational models in the future.

Guidelines 2.0: systematic development of a comprehensive checklist for a successful guideline enterprise.

PubMed

Schünemann, Holger J; Wiercioch, Wojtek; Etxeandia, Itziar; Falavigna, Maicon; Santesso, Nancy; Mustafa, Reem; Ventresca, Matthew; Brignardello-Petersen, Romina; Laisaar, Kaja-Triin; Kowalski, Sérgio; Baldeh, Tejan; Zhang, Yuan; Raid, Ulla; Neumann, Ignacio; Norris, Susan L; Thornton, Judith; Harbour, Robin; Treweek, Shaun; Guyatt, Gordon; Alonso-Coello, Pablo; Reinap, Marge; Brozek, Jan; Oxman, Andrew; Akl, Elie A

2014-02-18

Although several tools to evaluate the credibility of health care guidelines exist, guidance on practical steps for developing guidelines is lacking. We systematically compiled a comprehensive checklist of items linked to relevant resources and tools that guideline developers could consider, without the expectation that every guideline would address each item. We searched data sources, including manuals of international guideline developers, literature on guidelines for guidelines (with a focus on methodology reports from international and national agencies, and professional societies) and recent articles providing systematic guidance. We reviewed these sources in duplicate, extracted items for the checklist using a sensitive approach and developed overarching topics relevant to guidelines. In an iterative process, we reviewed items for duplication and omissions and involved experts in guideline development for revisions and suggestions for items to be added. We developed a checklist with 18 topics and 146 items and a webpage to facilitate its use by guideline developers. The topics and included items cover all stages of the guideline enterprise, from the planning and formulation of guidelines, to their implementation and evaluation. The final checklist includes links to training materials as well as resources with suggested methodology for applying the items. The checklist will serve as a resource for guideline developers. Consideration of items on the checklist will support the development, implementation and evaluation of guidelines. We will use crowdsourcing to revise the checklist and keep it up to date.

Guidelines 2.0: systematic development of a comprehensive checklist for a successful guideline enterprise

PubMed Central

Schünemann, Holger J.; Wiercioch, Wojtek; Etxeandia, Itziar; Falavigna, Maicon; Santesso, Nancy; Mustafa, Reem; Ventresca, Matthew; Brignardello-Petersen, Romina; Laisaar, Kaja-Triin; Kowalski, Sérgio; Baldeh, Tejan; Zhang, Yuan; Raid, Ulla; Neumann, Ignacio; Norris, Susan L.; Thornton, Judith; Harbour, Robin; Treweek, Shaun; Guyatt, Gordon; Alonso-Coello, Pablo; Reinap, Marge; Brožek, Jan; Oxman, Andrew; Akl, Elie A.

2014-01-01

Background: Although several tools to evaluate the credibility of health care guidelines exist, guidance on practical steps for developing guidelines is lacking. We systematically compiled a comprehensive checklist of items linked to relevant resources and tools that guideline developers could consider, without the expectation that every guideline would address each item. Methods: We searched data sources, including manuals of international guideline developers, literature on guidelines for guidelines (with a focus on methodology reports from international and national agencies, and professional societies) and recent articles providing systematic guidance. We reviewed these sources in duplicate, extracted items for the checklist using a sensitive approach and developed overarching topics relevant to guidelines. In an iterative process, we reviewed items for duplication and omissions and involved experts in guideline development for revisions and suggestions for items to be added. Results: We developed a checklist with 18 topics and 146 items and a webpage to facilitate its use by guideline developers. The topics and included items cover all stages of the guideline enterprise, from the planning and formulation of guidelines, to their implementation and evaluation. The final checklist includes links to training materials as well as resources with suggested methodology for applying the items. Interpretation: The checklist will serve as a resource for guideline developers. Consideration of items on the checklist will support the development, implementation and evaluation of guidelines. We will use crowdsourcing to revise the checklist and keep it up to date. PMID:24344144

Let Their Voices Be Heard! Building a Multicultural Audio Collection.

ERIC Educational Resources Information Center

Tucker, Judith Cook

1992-01-01

Discusses building a multicultural audio collection for a library. Gives some guidelines about selecting materials that really represent different cultures. Audio materials that are considered fall roughly into the categories of children's stories, didactic materials, oral histories, poetry and folktales, and music. The goal is an authentic…

The Digital electronic Guideline Library (DeGeL): a hybrid framework for representation and use of clinical guidelines.

PubMed

Shahar, Yuval; Young, Ohad; Shalom, Erez; Mayaffit, Alon; Moskovitch, Robert; Hessing, Alon; Galperin, Maya

2004-01-01

We propose to present a poster (and potentially also a demonstration of the implemented system) summarizing the current state of our work on a hybrid, multiple-format representation of clinical guidelines that facilitates conversion of guidelines from free text to a formal representation. We describe a distributed Web-based architecture (DeGeL) and a set of tools using the hybrid representation. The tools enable performing tasks such as guideline specification, semantic markup, search, retrieval, visualization, eligibility determination, runtime application and retrospective quality assessment. The representation includes four parallel formats: Free text (one or more original sources); semistructured text (labeled by the target guideline-ontology semantic labels); semiformal text (which includes some control specification); and a formal, machine-executable representation. The specification, indexing, search, retrieval, and browsing tools are essentially independent of the ontology chosen for guideline representation, but editing the semi-formal and formal formats requires ontology-specific tools, which we have developed in the case of the Asbru guideline-specification language. The four formats support increasingly sophisticated computational tasks. The hybrid guidelines are stored in a Web-based library. All tools, such as for runtime guideline application or retrospective quality assessment, are designed to operate on all representations. We demonstrate the hybrid framework by providing examples from the semantic markup and search tools.

Local plantar pressure relief in therapeutic footwear: design guidelines from finite element models.

PubMed

Erdemir, Ahmet; Saucerman, Jeffrey J; Lemmon, David; Loppnow, Bryan; Turso, Brie; Ulbrecht, Jan S; Cavanagh, Peter Re

2005-09-01

A major goal of therapeutic footwear in patients with pain or those at risk for skin injury is to relieve focal loading under prominent metatarsal heads. One frequent approach is to place plugs of compliant material into the midsole of the shoe. This study investigated 36 plug designs, a combination of three materials, six geometries, and two placements using a two-dimensional (2D) finite element model. Realistic loading conditions were obtained from plantar pressures (PP) recorded during walking in five subjects who wore control midsoles manufactured using Microcell Puff. Measured peak pressures underneath the second metatarsal head were similar to the results of the control model. PP obtained from simulations with the plugs built into a firm midsole were compared to the simulation results of the control midsole. Large plugs (e.g. 40 mm width), made out of Microcell Puff Lite or Plastazote Medium, placed at peak pressure sites, resulted in highest reductions in peak pressures (18-28%). Smaller plugs benefited from tapering when placed at high pressure areas. Case studies were completed on a healthy male subject and a diabetic female patient to address the efficacy of a plug design favored by our simulations (pressure based placement, 40 x 20 mm, Plastazote Medium). Successful reductions of second metatarsal head pressures were observed with a mediolateral load redistribution that was not represented by our model. 2D computer simulations allowed systematic investigation of plug properties without the need for high volume experimentation on human subjects and established basic guidelines for plug selection. In particular, plugs that are placed based on plantar pressure measurements were proven to be more effective when compared to those positioned according to the projection of the bony landmark on the foot-shoe plantar contact area.

Design and pilot evaluation of a system to develop computer-based site-specific practice guidelines from decision models.

PubMed

Sanders, G D; Nease, R F; Owens, D K

2000-01-01

Local tailoring of clinical practice guidelines (CPGs) requires experts in medicine and evidence synthesis unavailable in many practice settings. The authors' computer-based system enables developers and users to create, disseminate, and tailor CPGs, using normative decision models (DMs). ALCHEMIST, a web-based system, analyzes a DM, creates a CPG in the form of an annotated algorithm, and displays for the guideline user the optimal strategy. ALCHEMIST'S interface enables remote users to tailor the guideline by changing underlying input variables and observing the new annotated algorithm that is developed automatically. In a pilot evaluation of the system, a DM was used to evaluate strategies for staging non-small-cell lung cancer. Subjects (n = 15) compared the automatically created CPG with published guidelines for this staging and critiqued both using a previously developed instrument to rate the CPGs' usability, accountability, and accuracy on a scale of 0 (worst) to 2 (best), with higher scores reflecting higher quality. The mean overall score for the ALCHEMIST CPG was 1.502, compared with the published-CPG score of 0.987 (p = 0.002). The ALCHEMIST CPG scores for usability, accountability, and accuracy were 1.683, 1.393, and 1.430, respectively; the published CPG scores were 1.192, 0.941, and 0.830 (each comparison p < 0.05). On a scale of 1 (worst) to 5 (best), users' mean ratings of ALCHEMIST'S ease of use, usefulness of content, and presentation format were 4.76, 3.98, and 4.64, respectively. The results demonstrate the feasibility of a web-based system that automatically analyzes a DM and creates a CPG as an annotated algorithm, enabling remote users to develop site-specific CPGs. In the pilot evaluation, the ALCHEMIST guidelines met established criteria for quality and compared favorably with national CPGs. The high usability and usefulness ratings suggest that such systems can be a good tool for guideline development.

[Correspondence between advances of dental composites and adhesives and clinical guidelines for direct restorations].

PubMed

Wang, X Y; Yue, L

2018-06-09

The longevity of direct adhesive restoration is related to the restorative materials, the patient and the professional. On one hand, dental composites/adhesives have been modified and developed to fulfill the criteria for clinical application. On the other hand, the clinical guidelines for adhesive restorations have been released and updated accordingly, which would prolong the longevity of restorations. In this commentary, the removal of carious tissues, interface preparation for bonding and application of adhesives are emphasized. The administrative measures for registration and clinical evaluation criteria for adhesive restorative material are also introduced.

Energy star. (Latest citations from the Computer database). Published Search

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The bibliography contains citations concerning a collaborative effort between the Environmental Protection Agency (EPA) and private industry to reduce electrical power consumed by personal computers and related peripherals. Manufacturers complying with EPA guidelines are officially recognized by award of a special Energy Star logo, and are referred to in official documents as a vendor of green computers. (Contains a minimum of 81 citations and includes a subject term index and title list.)

Energy star. (Latest citations from the Computer database). Published Search

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The bibliography contains citations concerning a collaborative effort between the Environmental Protection Agency (EPA) and private industry to reduce electrical power consumed by personal computers and related peripherals. Manufacturers complying with EPA guidelines are officially recognized by award of a special Energy Star logo, and are referred to in official documents as a vendor of green computers. (Contains a minimum of 234 citations and includes a subject term index and title list.)

Design Guidelines and Criteria for User/Operator Transactions with Battlefield Automated Systems. Volume 2. Technical Discussion

DTIC Science & Technology

1981-02-01

Continue on tevetee «Id* If necemtery mid Identify br black number) Battlefield automated systems Human- computer interaction. Design criteria System...Report (this report) In-Depth Analyses of Individual Systems A. Tactical Fire Direction System (TACFIRE) (RP 81-26) B. Tactical Computer Terminal...select the design features and operating procedures of the human- computer Interface which best match the require- ments and capabilities of anticipated

Pressure ulcers: implementation of evidence-based nursing practice.

PubMed

Clarke, Heather F; Bradley, Chris; Whytock, Sandra; Handfield, Shannon; van der Wal, Rena; Gundry, Sharon

2005-03-01

A 2-year project was carried out to evaluate the use of multi-component, computer-assisted strategies for implementing clinical practice guidelines. This paper describes the implementation of the project and lessons learned. The evaluation and outcomes of implementing clinical practice guidelines to prevent and treat pressure ulcers will be reported in a separate paper. The prevalence and incidence rates of pressure ulcers, coupled with the cost of treatment, constitute a substantial burden for our health care system. It is estimated that treating a pressure ulcer can increase nursing time up to 50%, and that treatment costs per ulcer can range from US$10,000 to $86,000, with median costs of $27,000. Although evidence-based guidelines for prevention and optimum treatment of pressure ulcers have been developed, there is little empirical evidence about the effectiveness of implementation strategies. The study was conducted across the continuum of care (primary, secondary and tertiary) in a Canadian urban Health Region involving seven health care organizations (acute, home and extended care). Trained surveyors (Registered Nurses) determined the prevalence and incidence of pressure ulcers among patients in these organizations. The use of a computerized decision-support system assisted staff to select optimal, evidence-based care strategies, record information and analyse individual and aggregate data. Evaluation indicated an increase in knowledge relating to pressure ulcer prevention, treatment strategies, resources required, and the role of the interdisciplinary team. Lack of visible senior nurse leadership; time required to acquire computer skills and to implement new guidelines; and difficulties with the computer system were identified as barriers. There is a need for a comprehensive, supported and sustained approach to implementation of evidence-based practice for pressure ulcer prevention and treatment, greater understanding of organization-specific barriers, and mechanisms for addressing the barriers.

Designing Printed Instructional Materials.

ERIC Educational Resources Information Center

Burbank, Lucille; Pett, Dennis

1986-01-01

Discusses the importance of identifying the audience and determining specific objectives when designing printed instructional materials that will communicate effectively and provides detailed guidelines for dealing with such design factors as content, writing style, typography, illustrations, and page organization. (MBR)

The minimum information required for a glycomics experiment (MIRAGE) project: sample preparation guidelines for reliable reporting of glycomics datasets.

PubMed

Struwe, Weston B; Agravat, Sanjay; Aoki-Kinoshita, Kiyoko F; Campbell, Matthew P; Costello, Catherine E; Dell, Anne; Ten Feizi; Haslam, Stuart M; Karlsson, Niclas G; Khoo, Kay-Hooi; Kolarich, Daniel; Liu, Yan; McBride, Ryan; Novotny, Milos V; Packer, Nicolle H; Paulson, James C; Rapp, Erdmann; Ranzinger, Rene; Rudd, Pauline M; Smith, David F; Tiemeyer, Michael; Wells, Lance; York, William S; Zaia, Joseph; Kettner, Carsten

2016-09-01

The minimum information required for a glycomics experiment (MIRAGE) project was established in 2011 to provide guidelines to aid in data reporting from all types of experiments in glycomics research including mass spectrometry (MS), liquid chromatography, glycan arrays, data handling and sample preparation. MIRAGE is a concerted effort of the wider glycomics community that considers the adaptation of reporting guidelines as an important step towards critical evaluation and dissemination of datasets as well as broadening of experimental techniques worldwide. The MIRAGE Commission published reporting guidelines for MS data and here we outline guidelines for sample preparation. The sample preparation guidelines include all aspects of sample generation, purification and modification from biological and/or synthetic carbohydrate material. The application of MIRAGE sample preparation guidelines will lead to improved recording of experimental protocols and reporting of understandable and reproducible glycomics datasets. © The Author 2016. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Evaluating the uptake of Canada's new physical activity and sedentary behavior guidelines on service organizations' websites.

PubMed

Gainforth, Heather L; Berry, Tanya; Faulkner, Guy; Rhodes, Ryan E; Spence, John C; Tremblay, Mark S; Latimer-Cheung, Amy E

2013-06-01

New evidence-based physical activity and sedentary behavior guidelines for Canadians were launched in 2011. As a consequence, service organizations that promote physical activity directly to the public needed to change their promotion materials to reflect the new guidelines. Little is known about the rate at which service organizations adopt and integrate new evidence-based guidelines and determinants of guideline adoption. In this natural observational study, we evaluated the rate of online adoption of the new guidelines among key service organizations that promote physical activity and examined participation in a booster webinar as a supplemental dissemination strategy. One hundred fifty nine service organization websites were coded by one of six raters prior to the release of the new guidelines as well as at 3, 6, and 9 months after the release. Online adoption of the guidelines increased during the coding period with 51 % of organizations posting the guidelines or related information on their websites. Organizations' engagement in a webinar was associated with their adoption of the guidelines. The release of new Canadian Physical Activity and Sedentary Behaviour Guidelines led to increased guideline adoption on service organizations' websites. However, adoption was not universal. In order for the uptake of the new guidelines to be successful, further efforts need to be taken to ensure that service organizations present physical activity guidelines on their websites. Comprehensive, active dissemination strategies tailored to address organizational barriers are needed to ensure online guideline adoption.

Evaluation and characterization of fetal exposures to low frequency magnetic fields generated by laptop computers.

PubMed

Zoppetti, Nicola; Andreuccetti, Daniele; Bellieni, Carlo; Bogi, Andrea; Pinto, Iole

2011-12-01

Portable - or "laptop" - computers (LCs) are widely and increasingly used all over the world. Since LCs are often used in tight contact with the body even by pregnant women, fetal exposures to low frequency magnetic fields generated by these units can occur. LC emissions are usually characterized by complex waveforms and are often generated by the main AC power supply (when connected) and by the display power supply sub-system. In the present study, low frequency magnetic field emissions were measured for a set of five models of portable computers. For each of them, the magnetic flux density was characterized in terms not just of field amplitude, but also of the so called "weighted peak" (WP) index, introduced in the 2003 ICNIRP Statement on complex waveforms and confirmed in the 2010 ICNIRP Guidelines for low frequency fields. For the model of LC presenting the higher emission, a deeper analysis was also carried out, using numerical dosimetry techniques to calculate internal quantities (current density and in-situ electric field) with reference to a digital body model of a pregnant woman. Since internal quantities have complex waveforms too, the concept of WP index was extended to them, considering the ICNIRP basic restrictions defined in the 1998 Guidelines for the current density and in the 2010 Guidelines for the in-situ electric field. Induced quantities and WP indexes were computed using an appropriate original formulation of the well known Scalar Potential Finite Difference (SPFD) numerical method for electromagnetic dosimetry in quasi-static conditions. Copyright © 2011 Elsevier Ltd. All rights reserved.

Bridging the guideline implementation gap: a systematic, document-centered approach to guideline implementation.

PubMed

Shiffman, Richard N; Michel, George; Essaihi, Abdelwaheb; Thornquist, Elizabeth

2004-01-01

A gap exists between the information contained in published clinical practice guidelines and the knowledge and information that are necessary to implement them. This work describes a process to systematize and make explicit the translation of document-based knowledge into workflow-integrated clinical decision support systems. This approach uses the Guideline Elements Model (GEM) to represent the guideline knowledge. Implementation requires a number of steps to translate the knowledge contained in guideline text into a computable format and to integrate the information into clinical workflow. The steps include: (1) selection of a guideline and specific recommendations for implementation, (2) markup of the guideline text, (3) atomization, (4) deabstraction and (5) disambiguation of recommendation concepts, (6) verification of rule set completeness, (7) addition of explanations, (8) building executable statements, (9) specification of origins of decision variables and insertions of recommended actions, (10) definition of action types and selection of associated beneficial services, (11) choice of interface components, and (12) creation of requirement specification. The authors illustrate these component processes using examples drawn from recent experience translating recommendations from the National Heart, Lung, and Blood Institute's guideline on management of chronic asthma into a workflow-integrated decision support system that operates within the Logician electronic health record system. Using the guideline document as a knowledge source promotes authentic translation of domain knowledge and reduces the overall complexity of the implementation task. From this framework, we believe that a better understanding of activities involved in guideline implementation will emerge.

Sourcebook for Sex Equality: In-Service Training. An Annotated Listing of Materials and Media for Affirmative Action In-Service Training. Bibliographic Series, 2.

ERIC Educational Resources Information Center

Hulme, Marylin A., Comp.

The materials contained in this annotated bibliography include films, slide shows, information resources, evaluation materials, sample workshop formats, and guidelines for sex-fair and race-fair materials and group activities. The bibliography is divided into four sections: (1) "General Resources" includes readings in sex role stereotyping,…

Guidelines for Computing Longitudinal Dynamic Stability Characteristics of a Subsonic Transport

NASA Technical Reports Server (NTRS)

Thompson, Joseph R.; Frank, Neal T.; Murphy, Patrick C.

2010-01-01

A systematic study is presented to guide the selection of a numerical solution strategy for URANS computation of a subsonic transport configuration undergoing simulated forced oscillation about its pitch axis. Forced oscillation is central to the prevalent wind tunnel methodology for quantifying aircraft dynamic stability derivatives from force and moment coefficients, which is the ultimate goal for the computational simulations. Extensive computations are performed that lead in key insights of the critical numerical parameters affecting solution convergence. A preliminary linear harmonic analysis is included to demonstrate the potential of extracting dynamic stability derivatives from computational solutions.

Review Question Formats and Web Design Usability in Computer-Assisted Instruction

ERIC Educational Resources Information Center

Green, Rebecca S.; Eppler, Marion A.; Ironsmith, Marsha; Wuensch, Karl L.

2007-01-01

We tested the effects of two embedded review question formats and the application of web design guidelines in a computer-assisted mastery learning course in developmental psychology. Students used either a branching review question format that redirected them to relevant portions of the study module after incorrect answers or a linear format that…

32 CFR Appendix E to Part 323 - OMB Guidelines for Matching Programs

Code of Federal Regulations, 2010 CFR

2010-07-01

... concern expressed by the Congress in the Privacy Act of 1974 that “the increasing use of computers and sophisticated information technology, while essential to the efficient operation of the Government, has greatly... which a computer is used to compare two or more automated systems of records or a system of records with...

32 CFR Appendix E to Part 323 - OMB Guidelines for Matching Programs

Code of Federal Regulations, 2011 CFR

2011-07-01

... concern expressed by the Congress in the Privacy Act of 1974 that “the increasing use of computers and sophisticated information technology, while essential to the efficient operation of the Government, has greatly... which a computer is used to compare two or more automated systems of records or a system of records with...

A review of classification algorithms for EEG-based brain-computer interfaces.

PubMed

Lotte, F; Congedo, M; Lécuyer, A; Lamarche, F; Arnaldi, B

2007-06-01

In this paper we review classification algorithms used to design brain-computer interface (BCI) systems based on electroencephalography (EEG). We briefly present the commonly employed algorithms and describe their critical properties. Based on the literature, we compare them in terms of performance and provide guidelines to choose the suitable classification algorithm(s) for a specific BCI.

Computer Decision Support to Improve Autism Screening and Care in Community Pediatric Clinics

ERIC Educational Resources Information Center

Bauer, Nerissa S.; Sturm, Lynne A.; Carroll, Aaron E.; Downs, Stephen M.

2013-01-01

An autism module was added to an existing computer decision support system (CDSS) to facilitate adherence to recommended guidelines for screening for autism spectrum disorders in primary care pediatric clinics. User satisfaction was assessed by survey and informal feedback at monthly meetings between clinical staff and the software team. To assess…

Suggestions for CAP-TSD mesh and time-step input parameters

NASA Technical Reports Server (NTRS)

Bland, Samuel R.

1991-01-01

Suggestions for some of the input parameters used in the CAP-TSD (Computational Aeroelasticity Program-Transonic Small Disturbance) computer code are presented. These parameters include those associated with the mesh design and time step. The guidelines are based principally on experience with a one-dimensional model problem used to study wave propagation in the vertical direction.

32 CFR Appendix E to Part 323 - OMB Guidelines for Matching Programs

Code of Federal Regulations, 2012 CFR

2012-07-01

... concern expressed by the Congress in the Privacy Act of 1974 that “the increasing use of computers and sophisticated information technology, while essential to the efficient operation of the Government, has greatly... which a computer is used to compare two or more automated systems of records or a system of records with...

Linking Pedagogical Theory of Computer Games to their Usability

ERIC Educational Resources Information Center

Ang, Chee Siang; Avni, Einav; Zaphiris, Panayiotis

2008-01-01

This article reviews a range of literature of computer games and learning theories and attempts to establish a link between them by proposing a typology of games which we use as a new usability measure for the development of guidelines for game-based learning. First, we examine game literature in order to understand the key elements that…

Environmental Survival and Citizen Action. Ecology: Point/Counterpoint; Reader to Accompany Environmental Survival and Citizen Action.

ERIC Educational Resources Information Center

Dawson, Richard G.

Guidelines and readings for an interdisciplinary course in biology and government adapt as a semester or year course for an entire class, independent study, or for teacher resource materials. An attitude questionnaire, list of suggested projects, and reading and writing assignments constitute the guidelines. The content first considers the…

40 CFR 799.9310 - TSCA 90-day oral toxicity in rodents.

Code of Federal Regulations, 2011 CFR

2011-07-01

... REQUIREMENTS Health Effects Test Guidelines § 799.9310 TSCA 90-day oral toxicity in rodents. (a) Scope. This... a test substance for a period of 90 days. This study is not capable of determining those effects... exposure. (b) Source. The source material used in developing this TSCA test guideline is the Office of...

40 CFR 799.9310 - TSCA 90-day oral toxicity in rodents.

Code of Federal Regulations, 2014 CFR

2014-07-01

... REQUIREMENTS Health Effects Test Guidelines § 799.9310 TSCA 90-day oral toxicity in rodents. (a) Scope. This... a test substance for a period of 90 days. This study is not capable of determining those effects... exposure. (b) Source. The source material used in developing this TSCA test guideline is the Office of...

40 CFR 799.9310 - TSCA 90-day oral toxicity in rodents.

Code of Federal Regulations, 2010 CFR

2010-07-01

... REQUIREMENTS Health Effects Test Guidelines § 799.9310 TSCA 90-day oral toxicity in rodents. (a) Scope. This... a test substance for a period of 90 days. This study is not capable of determining those effects... exposure. (b) Source. The source material used in developing this TSCA test guideline is the Office of...

40 CFR 799.9310 - TSCA 90-day oral toxicity in rodents.

Code of Federal Regulations, 2013 CFR

2013-07-01

... REQUIREMENTS Health Effects Test Guidelines § 799.9310 TSCA 90-day oral toxicity in rodents. (a) Scope. This... a test substance for a period of 90 days. This study is not capable of determining those effects... exposure. (b) Source. The source material used in developing this TSCA test guideline is the Office of...

40 CFR 799.9310 - TSCA 90-day oral toxicity in rodents.

Code of Federal Regulations, 2012 CFR

2012-07-01

... REQUIREMENTS Health Effects Test Guidelines § 799.9310 TSCA 90-day oral toxicity in rodents. (a) Scope. This... a test substance for a period of 90 days. This study is not capable of determining those effects... exposure. (b) Source. The source material used in developing this TSCA test guideline is the Office of...

A Consortium for Teacher Preparation: Model Guidelines for Small Colleges.

ERIC Educational Resources Information Center

Fouts, Jeffrey T.

Guidelines have been developed for a consortium approach to teacher preparation in a small college that may need some expertise and access to teaching materials which can be provided by local school districts and other agencies. This approach to the design, management, and evaluation of the program offers the opportunity to involve the schools…

Advanced Life Support Equivalent System Mass Guidelines Document

NASA Technical Reports Server (NTRS)

Levri, Julie; Fisher, John W.; Jones, Harry W.; Drysdale, Alan E.; Ewert, Michael K.; Hanford, Anthony J.; Hogan, John A.; Joshi, Jitendri, A.; Vaccari, David A.

2003-01-01

This document is a viewgraph presentation which provides guidelines for performing an Equivalent System Mass (ESM) evaluation for trade study purposes. The document: 1) Defines ESM; 2) Explains how to calculate ESM; 3) Discusses interpretation of ESM results. The document is designed to provide detailed instructive material for researchers who are performing ESM evaluations for the first time.

Distance art groups for women with breast cancer: guidelines and recommendations.

PubMed

Collie, Kate; Bottorff, Joan L; Long, Bonita C; Conati, Cristina

2006-08-01

To overcome barriers that prevent women with breast cancer from attending support groups, innovative formats and modes of delivery both need to be considered. The present study was part of an interdisciplinary program of research in which researchers from counseling psychology, psycho-oncology, nursing, computer science, and fine arts have explored art making as an innovative format and telehealth as a mode of delivery. For this study, we conducted focus groups and interviews with 25 people with expertise about breast cancer, art, art therapy, and distance delivery of mental health services to generate guidelines for distance art-based psychosocial support services to women with breast cancer. A qualitative analysis of the focus group and interview data yielded guidelines for developers and facilitators of distance art groups for women with breast cancer pertaining to (a) emotional expression, (b) emotional support, (c) emotional safety, and (d) accommodating individual differences, plus special considerations for art therapy groups. Further research is needed pertaining to the use of computers, involvement of art therapists, and screening out vulnerable clients.

Development of display design and command usage guidelines for Spacelab experiment computer applications

NASA Technical Reports Server (NTRS)

Dodson, D. W.; Shields, N. L., Jr.

1979-01-01

Individual Spacelab experiments are responsible for developing their CRT display formats and interactive command scenarios for payload crew monitoring and control of experiment operations via the Spacelab Data Display System (DDS). In order to enhance crew training and flight operations, it was important to establish some standardization of the crew/experiment interface among different experiments by providing standard methods and techniques for data presentation and experiment commanding via the DDS. In order to establish optimum usage guidelines for the Spacelab DDS, the capabilities and limitations of the hardware and Experiment Computer Operating System design had to be considered. Since the operating system software and hardware design had already been established, the Display and Command Usage Guidelines were constrained to the capabilities of the existing system design. Empirical evaluations were conducted on a DDS simulator to determine optimum operator/system interface utilization of the system capabilities. Display parameters such as information location, display density, data organization, status presentation and dynamic update effects were evaluated in terms of response times and error rates.

The new American Heart Association cardiopulmonary resuscitation guidelines: should children and adults have to share?

PubMed

Sherman, Mindy

2007-06-01

The latest American Heart Association guidelines for pediatric cardiopulmonary resuscitation (CPR) were published in December 2005. Changes from the 2000 guidelines were directed toward simplifying CPR. Infants, children, and adults now share the same recommendation for the initial compression:ventilation ratio. This is a significant change for pediatricians trained in the importance of a respiratory etiology of pediatric cardiopulmonary arrest. The present review will focus on the rationale behind these guideline changes. The new guidelines for single rescuer CPR include a compression:ventilation ratio of 30: 2 for both adult and pediatric victims. The impetus for this recommendation is based on recent appreciation for the deleterious effects of hyperventilation as well as an attempt to increase bystander delivery of CPR. The physiologic results of hyperventilation are discussed. The new pediatric basic life support guideline changes are underscored. Research representing the spectrum of opinions on the optimal compression:ventilation ratio, including compression-only CPR, is presented. Although based primarily on adult, animal, and computational models, the new compression:ventilation ratio, recommended for both initial pediatric and adult CPR, is a reasonable recommendation. The simplified CPR guidelines released in 2005 will hopefully contribute to improved bystander delivery of CPR and improved outcome.

Translating New Lung Cancer Screening Guidelines into Practice: The Experience of One Community Hospital.

PubMed

Ledford, Christy J W; Gawrys, Breanna L; Wall, Jessica L; Saas, Patrick D; Seehusen, Dean A

2016-01-01

In December 2013 the US Preventive Services Task Force issued a recommendation for lung cancer screening with annual low-dose computed tomography (LDCT). As screening guidelines emerge and change, this creates an environment for studying the translation of these guidelines into practice. This study assessed how these guidelines were implemented in a community hospital setting and the resulting radiologic findings. This observational study examined the radiologic outcomes of LDCT lung cancer screening guidelines and the resulting notification. During the first year after publication of the guidelines, 94 screening LDCT scans were ordered. Of these, 21 (22.3%) did not meet the criteria outlined by the US Preventive Services Task Force. Among the 72 cases that did met published criteria, 65.3% of scans detected nodules, and among the remaining 35.6%, half had another clinically significant finding. This study shows that new lung cancer screening guidelines, as implemented at a community hospital, resulted in radiologic findings that required follow-up in more than half of patients. Clinicians must be aware of these potential incidental findings when talking to patients about the decision to order screenings. © Copyright 2016 by the American Board of Family Medicine.

Pavement Recycling Guidelines for State and Local Governments: Participant's Reference Book

DOT National Transportation Integrated Search

1998-03-01

Recycling or reuse of existing asphalt pavement materials to produce new pavement materials has the following advantages: (a) reduce costs of construction, (b) conservation of aggregate and binder, (c) preservation of the existing pavement geometrics...

Determining the effectiveness of pavement marking materials.

DOT National Transportation Integrated Search

2001-01-01

The purpose of this research was to determine the safety, motorist opinion, and cost-effectiveness of pavement marking materials used by the Virginia Department of Transportation and to develop guidelines, where possible, as to when each type of mate...

Structural evaluation of asphalt pavements with full-depth reclaimed base.

DOT National Transportation Integrated Search

2012-12-01

Currently, MnDOT pavement design recommends granular equivalency, GE = 1.0 for non-stabilized full-depth : reclamation (FDR) material, which is equivalent to class 5 material. For stabilized full-depth reclamation (SFDR), : there was no guideline for...

Research papers and publications (1981-1987): Workload research program

NASA Technical Reports Server (NTRS)

Hart, Sandra G. (Compiler)

1987-01-01

An annotated bibliography of the research reports written by participants in NASA's Workload Research Program since 1981 is presented, representing the results of theoretical and applied research conducted at Ames Research Center and at universities and industrial laboratories funded by the program. The major program elements included: 1) developing an understanding of the workload concept; 2) providing valid, reliable, and practical measures of workload; and 3) creating a computer model to predict workload. The goal is to provide workload-related design principles, measures, guidelines, and computational models. The research results are transferred to user groups by establishing close ties with manufacturers, civil and military operators of aerospace systems, and regulatory agencies; publishing scientific articles; participating in and sponsoring workshops and symposia; providing information, guidelines, and computer models; and contributing to the formulation of standards. In addition, the methods and theories developed have been applied to specific operational and design problems at the request of a number of industry and government agencies.

Guidelines and standard procedures for continuous water-quality monitors: Site selection, field operation, calibration, record computation, and reporting

USGS Publications Warehouse

Wagner, Richard J.; Mattraw, Harold C.; Ritz, George F.; Smith, Brett A.

2000-01-01

The U.S. Geological Survey uses continuous water-quality monitors to assess variations in the quality of the Nation's surface water. A common system configuration for data collection is the four-parameter water-quality monitoring system, which collects temperature, specific conductance, dissolved oxygen, and pH data, although systems can be configured to measure other properties such as turbidity or chlorophyll. The sensors that are used to measure these water properties require careful field observation, cleaning, and calibration procedures, as well as thorough procedures for the computation and publication of final records. Data from sensors can be used in conjunction with collected samples and chemical analyses to estimate chemical loads. This report provides guidelines for site-selection considerations, sensor test methods, field procedures, error correction, data computation, and review and publication processes. These procedures have evolved over the past three decades, and the process continues to evolve with newer technologies.

Guideline of guidelines: asymptomatic microscopic haematuria.

PubMed

Linder, Brian J; Bass, Edward J; Mostafid, Hugh; Boorjian, Stephen A

2018-02-01

The aim of the present study was to review major organizational guidelines on the evaluation and management of asymptomatic microscopic haematuria (AMH). We reviewed the haematuria guidelines from: the American Urological Association; the consensus statement by the Canadian Urological Association, Canadian Urologic Oncology Group and Bladder Cancer Canada; the American College of Physicians; the Joint Consensus Statement of the Renal Association and British Association of Urological Surgeons; and the National Institute for Health and Care Excellence. All guidelines reviewed recommend evaluation for AMH in the absence of potential benign aetiologies, with the evaluation including cystoscopy and upper urinary tract imaging. Existing guidelines vary in their definition of AMH (role of urine dipstick vs urine microscopy), the age threshold for recommending evaluation, and the optimal imaging method (computed tomography vs ultrasonography). Of the reviewed guidelines, none recommended the use of urine cytology or urine markers during the initial AMH evaluation. Patients should have ongoing follow-up after a negative initial AMH evaluation. Significant variation exists among current guidelines for AMH with respect to who should be evaluated and in what manner. Given the patient and health system implications of balancing appropriately focused and effective diagnostic evaluation, AMH represents a valuable future research opportunity. © 2017 The Authors BJU International © 2017 BJU International Published by John Wiley & Sons Ltd.

Guidelines for qualifying cleaning and verification materials

NASA Technical Reports Server (NTRS)

Webb, D.

1995-01-01

This document is intended to provide guidance in identifying technical issues which must be addressed in a comprehensive qualification plan for materials used in cleaning and cleanliness verification processes. Information presented herein is intended to facilitate development of a definitive checklist that should address all pertinent materials issues when down selecting a cleaning/verification media.

Materials management: stretching the "household" budget.

PubMed

Carpe, R H; Carroll, P E

1987-11-01

As CFOs assume responsibility for the materials management function because of the potential to maximize cash flow, achieve economies of scale, decrease costs, and streamline operations, they look for guidelines to evaluate performance. Conducting a systems operations audit can aid in assessing that performance. CFOs can determine whether materials management processes are working "smarter, nor harder."

49 CFR Appendix B to Part 209 - Federal Railroad Administration Guidelines for Initial Hazardous Materials Assessments

Code of Federal Regulations, 2010 CFR

2010-10-01

... hazardous materials are only safe for transportation when they are securely sealed in a proper package...) that a container or package for transportation of a hazardous material is safe, certified, or in.... —Listing an unauthorized, incorrect, non-working, or unmonitored (24 hrs. a day) emergency response...

Computational Intelligence and Its Impact on Future High-Performance Engineering Systems

NASA Technical Reports Server (NTRS)

Noor, Ahmed K. (Compiler)

1996-01-01

This document contains presentations from the joint UVA/NASA Workshop on Computational Intelligence held at the Virginia Consortium of Engineering and Science Universities, Hampton, Virginia, June 27-28, 1995. The presentations addressed activities in the areas of fuzzy logic, neural networks, and evolutionary computations. Workshop attendees represented NASA, the National Science Foundation, the Department of Energy, National Institute of Standards and Technology (NIST), the Jet Propulsion Laboratory, industry, and academia. The workshop objectives were to assess the state of technology in the Computational intelligence area and to provide guidelines for future research.

Predictive Modeling and Optimization of Vibration-assisted AFM Tip-based Nanomachining

NASA Astrophysics Data System (ADS)

Kong, Xiangcheng

The tip-based vibration-assisted nanomachining process offers a low-cost, low-effort technique in fabricating nanometer scale 2D/3D structures in sub-100 nm regime. To understand its mechanism, as well as provide the guidelines for process planning and optimization, we have systematically studied this nanomachining technique in this work. To understand the mechanism of this nanomachining technique, we firstly analyzed the interaction between the AFM tip and the workpiece surface during the machining process. A 3D voxel-based numerical algorithm has been developed to calculate the material removal rate as well as the contact area between the AFM tip and the workpiece surface. As a critical factor to understand the mechanism of this nanomachining process, the cutting force has been analyzed and modeled. A semi-empirical model has been proposed by correlating the cutting force with the material removal rate, which was validated using experimental data from different machining conditions. With the understanding of its mechanism, we have developed guidelines for process planning of this nanomachining technique. To provide the guideline for parameter selection, the effect of machining parameters on the feature dimensions (depth and width) has been analyzed. Based on ANOVA test results, the feature width is only controlled by the XY vibration amplitude, while the feature depth is affected by several machining parameters such as setpoint force and feed rate. A semi-empirical model was first proposed to predict the machined feature depth under given machining condition. Then, to reduce the computation intensity, linear and nonlinear regression models were also proposed and validated using experimental data. Given the desired feature dimensions, feasible machining parameters could be provided using these predictive feature dimension models. As the tip wear is unavoidable during the machining process, the machining precision will gradually decrease. To maintain the machining quality, the guideline for when to change the tip should be provided. In this study, we have developed several metrics to detect tip wear, such as tip radius and the pull-off force. The effect of machining parameters on the tip wear rate has been studied using these metrics, and the machining distance before a tip must be changed has been modeled using these machining parameters. Finally, the optimization functions have been built for unit production time and unit production cost subject to realistic constraints, and the optimal machining parameters can be found by solving these functions.

Guidelines for handling radioactively contaminated decedents.

PubMed

Wood, Charles M; DePaolo, Frank; Whitaker, Doggett

2008-05-01

The Centers for Disease Control and Prevention recently issued guidelines for medical examiners, coroners, and morticians in dealing with decedents after detonation of an improvised nuclear device (IND) or radiological dispersal device (RDD) (). Partners in this effort included the New York City Office of Chief Medical Examiner and the National Funeral Directors' Association. This paper describes the handling techniques required for loose surface contamination, radioactive shrapnel, and internal contamination caused by inhaling or ingesting radioactive materials from an IND or RDD, and provides suggested guidelines for medical examiners, coroners, and morticians to deal with these situations.

Energy star. (Latest citations from the Computer database). Published Search

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The bibliography contains citations concerning a collaborative effort between the Environmental Protection Agency (EPA) and private industry to reduce electrical power consumed by personal computers and related peripherals. Manufacturers complying with EPA guidelines are officially recognized by award of a special Energy Star logo, and are referred to in official documents as a vendor of green computers. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

Mathematics and online learning experiences: a gateway site for engineering students

NASA Astrophysics Data System (ADS)

Masouros, Spyridon D.; Alpay, Esat

2010-03-01

This paper focuses on the preliminary design of a multifaceted computer-based mathematics resource for undergraduate and pre-entry engineering students. Online maths resources, while attractive in their flexibility of delivery, have seen variable interest from students and teachers alike. Through student surveys and wide consultations, guidelines have been developed for effectively collating and integrating learning, support, application and diagnostic tools to produce an Engineer's Mathematics Gateway. Specific recommendations include: the development of a shared database of engineering discipline-specific problems and examples; the identification of, and resource development for, troublesome mathematics topics which encompass ideas of threshold concepts and mastery components; the use of motivational and promotional material to raise student interest in learning mathematics in an engineering context; the use of general and lecture-specific concept maps and matrices to identify the needs and relevance of mathematics to engineering topics; and further exploration of the facilitation of peer-based learning through online resources.

Reconciliation of ontology and terminology to cope with linguistics.

PubMed

Baud, Robert H; Ceusters, Werner; Ruch, Patrick; Rassinoux, Anne-Marie; Lovis, Christian; Geissbühler, Antoine

2007-01-01

To discuss the relationships between ontologies, terminologies and language in the context of Natural Language Processing (NLP) applications in order to show the negative consequences of confusing them. The viewpoints of the terminologist and (computational) linguist are developed separately, and then compared, leading to the presentation of reconciliation among these points of view, with consideration of the role of the ontologist. In order to encourage appropriate usage of terminologies, guidelines are presented advocating the simultaneous publication of pragmatic vocabularies supported by terminological material based on adequate ontological analysis. Ontologies, terminologies and natural languages each have their own purpose. Ontologies support machine understanding, natural languages support human communication, and terminologies should form the bridge between them. Therefore, future terminology standards should be based on sound ontology and do justice to the diversities in natural languages. Moreover, they should support local vocabularies, in order to be easily adaptable to local needs and practices.

Progressive fracture of polymer matrix composite structures: A new approach

NASA Technical Reports Server (NTRS)

Chamis, C. C.; Murthy, P. L. N.; Minnetyan, L.

1992-01-01

A new approach independent of stress intensity factors and fracture toughness parameters has been developed and is described for the computational simulation of progressive fracture of polymer matrix composite structures. The damage stages are quantified based on physics via composite mechanics while the degradation of the structural behavior is quantified via the finite element method. The approach account for all types of composite behavior, structures, load conditions, and fracture processes starting from damage initiation, to unstable propagation and to global structural collapse. Results of structural fracture in composite beams, panels, plates, and shells are presented to demonstrate the effectiveness and versatility of this new approach. Parameters and guidelines are identified which can be used as criteria for structural fracture, inspection intervals, and retirement for cause. Generalization to structures made of monolithic metallic materials are outlined and lessons learned in undertaking the development of new approaches, in general, are summarized.

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKenzie-Carter, M.A.; Lyon, R.E.

This report contains information to support the Environmental Assessment for the Compact Ignition Tokamak Project (CIT) proposed for Princeton Plasma Physics Laboratory (PPPL). The assumptions and methodology used to assess the impact to members of the public from operational and accidental releases of radioactive material from the proposed CIT during the operational period of the project are described. A description of the tracer release tests conducted at PPPL by NOAA is included; dispersion values from these tests are used in the dose calculation. Radiological releases, doses, and resulting health risks are calculated. The computer code AIRDOS-EPA is used to calculatemore » the individual and population doses for routine releases; FUSCRAC3 is used to calculate doses resulting from off-normal releases where direct application of the NOAA tracer test data is not practical. Where applicable, doses are compared to regulatory limits and guidelines values. 44 refs., 5 figs., 18 tabs.« less

Analysis of Impact Induced Damage and its Effect on Structural Integrity of Space Flight Composite Overwrapped Pressure Vessels

NASA Technical Reports Server (NTRS)

Wnuk, Michael P.

1997-01-01

The objective of this research work has been to provide analytical background and support to the ongoing experimental program at NASA, White Sands Test Facility, involving testing composite overwrapped pressure vessels (COPV) for impact damage and cyclic pressurization. Preliminary theoretical basis, including the governing equations for a shallow shell subjected to internal pressure, has been established. Effects of the Griffith type cracks on the structural integrity of the cylindrical vessel were evaluated by methods of Fracture Mechanics. The results indicate that the effective mass of the pressure vessel is an important factor influencing the response to impact events. We also have found that the material properties of the target, contained in the constitutive equations of the composite attached to the Aluminum liner, dominate the impact event in the low velocity range, the material properties become less important, while the target mass distribution and the impactor mass become more significant as the velocity of the impactor increases. Therefore, at high-velocity impact it is not only the kinetic energy of the impactor but also its mass which has a significant effect on the dynamics of the event, and consequently on the induced damage. This work also suggests a methodology for an assessment of the rate of loading effects on the degradation of the material toughness associated with a high-velocity impact where the rate effects become significant. To model the rate dependence of the material response a viscoelastic-plastic constitutive equations were assumed, and on this basis predictions are made regarding the rate dependent material resistance curve. Other dynamic phenomena associated with the impact event have been treated in the framework of the Computational Mechanics using the courtesy of Prof. P. Guebelle and his graduate student at University of Illinois at Urbana-Champaign who have an access to a super-fast computer located on their campus. Finally, the guidelines for a follow-up research program are provided in the body of this report. They address three major areas: theoretical research, numerical studies, and further experimental work.

29 CFR 541.704 - Use of manuals.

Code of Federal Regulations, 2013 CFR

2013-07-01

... DELIMITING THE EXEMPTIONS FOR EXECUTIVE, ADMINISTRATIVE, PROFESSIONAL, COMPUTER AND OUTSIDE SALES EMPLOYEES Definitions and Miscellaneous Provisions § 541.704 Use of manuals. The use of manuals, guidelines or other...

29 CFR 541.704 - Use of manuals.

Code of Federal Regulations, 2012 CFR

2012-07-01

... DELIMITING THE EXEMPTIONS FOR EXECUTIVE, ADMINISTRATIVE, PROFESSIONAL, COMPUTER AND OUTSIDE SALES EMPLOYEES Definitions and Miscellaneous Provisions § 541.704 Use of manuals. The use of manuals, guidelines or other...

29 CFR 541.704 - Use of manuals.

Code of Federal Regulations, 2011 CFR

2011-07-01

... DELIMITING THE EXEMPTIONS FOR EXECUTIVE, ADMINISTRATIVE, PROFESSIONAL, COMPUTER AND OUTSIDE SALES EMPLOYEES Definitions and Miscellaneous Provisions § 541.704 Use of manuals. The use of manuals, guidelines or other...

29 CFR 541.704 - Use of manuals.

Code of Federal Regulations, 2014 CFR

2014-07-01

... DELIMITING THE EXEMPTIONS FOR EXECUTIVE, ADMINISTRATIVE, PROFESSIONAL, COMPUTER AND OUTSIDE SALES EMPLOYEES Definitions and Miscellaneous Provisions § 541.704 Use of manuals. The use of manuals, guidelines or other...

77 FR 62216 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-12

... NIST researchers to study human-computer interactions and help establish guidelines and standards for more effective and efficient interactions. Affected Public: Individual or households; State, Local or...

A computer-based information system for epilepsy and electroencephalography.

PubMed

Finnerup, N B; Fuglsang-Frederiksen, A; Røssel, P; Jennum, P

1999-08-01

This paper describes a standardised computer-based information system for electroencephalography (EEG) focusing on epilepsy. The system was developed using a prototyping approach. It is based on international recommendations for EEG examination, interpretation and terminology, international guidelines for epidemiological studies on epilepsy and classification of epileptic seizures and syndromes and international classification of diseases. It is divided into: (1) clinical information and epilepsy relevant data; and (2) EEG data, which is hierarchically structured including description and interpretation of EEG. Data is coded but is supplemented with unrestricted text. The resulting patient database can be integrated with other clinical databases and with the patient record system and may facilitate clinical and epidemiological research and development of standards and guidelines for EEG description and interpretation. The system is currently used for teleconsultation between Gentofte and Lisbon.

Some system considerations in configuring a digital flight control - navigation system

NASA Technical Reports Server (NTRS)

Boone, J. H.; Flynn, G. R.

1976-01-01

A trade study was conducted with the objective of providing a technical guideline for selection of the most appropriate computer technology for the automatic flight control system of a civil subsonic jet transport. The trade study considers aspects of using either an analog, incremental type special purpose computer or a general purpose computer to perform critical autopilot computation functions. It also considers aspects of integration of noncritical autopilot and autothrottle modes into the computer performing the critical autoland functions, as compared to the federation of the noncritical modes into either a separate computer or with a R-Nav computer. The study is accomplished by establishing the relative advantages and/or risks associated with each of the computer configurations.

Better Reading Materials for the Content Areas

ERIC Educational Resources Information Center

Peters, Nathaniel A.; Peters, Juanita I.

1974-01-01

The annotated bibliography (an addendum to the Fall 1973 series of listings published in the Volta Review) lists 16 resource materials and classroom textbooks beneficial for use with deaf students, and guidelines for self-evaluation of practices in teaching reading. (LS)

Job Corps Intergroup Relations Program.

ERIC Educational Resources Information Center

Job Corps (DOL), Washington, DC.

The Job Corps Intergroup Relations Program provides an integrated curriculum involving orientation, residential living, education, and vocational training. These instructional materials for the program provide guidelines and materials emphasizing ethnic contributions in order to improve human relations among ethnic groups and between women and…

Design Guidelines and Criteria for User/Operator Transactions with Battlefield Automated Systems. Volume I. Executive Summary

DTIC Science & Technology

1981-02-01

SUMMARY Robert N. Parrish, Jesse L. Gates, and Sarah J. Munger SYNECTICS CORPORATION HUMAN FACTORS TECHNICAL AREA L.. .iU. S. Army Research Institute for...of the Human Factors Technical Area, ARI, is the Contracting Officer’s Representative (COR) for this project. 19. KEY WORDS (Continue on reverse...aide It neceeary ad Identify by block number) Battlefield automated systems Human -computer interaction Design criteria System analysis Design guidelines

User involvement in the implementation of clinical guidelines for common mental health disorders: a review and compilation of strategies and resources.

PubMed

Moreno, Eliana M; Moriana, Juan Antonio

2016-08-09

There is now broad consensus regarding the importance of involving users in the process of implementing guidelines. Few studies, however, have addressed this issue, let alone the implementation of guidelines for common mental health disorders. The aim of this study is to compile and describe implementation strategies and resources related to common clinical mental health disorders targeted at service users. The literature was reviewed and resources for the implementation of clinical guidelines were compiled using the PRISMA model. A mixed qualitative and quantitative analysis was performed based on a series of categories developed ad hoc. A total of 263 items were included in the preliminary analysis and 64 implementation resources aimed at users were analysed in depth. A wide variety of types, sources and formats were identified, including guides (40%), websites (29%), videos and leaflets, as well as instruments for the implementation of strategies regarding information and education (64%), self-care, or users' assessment of service quality. The results reveal the need to establish clear criteria for assessing the quality of implementation materials in general and standardising systems to classify user-targeted strategies. The compilation and description of key elements of strategies and resources for users can be of interest in designing materials and specific actions for this target audience, as well as improving the implementation of clinical guidelines.

CAD/CAM (Computer Aided Design/Computer Aided Manufacture). A Brief Guide to Materials in the Library of Congress.

ERIC Educational Resources Information Center

Havas, George D.

This brief guide to materials in the Library of Congress (LC) on computer aided design and/or computer aided manufacturing lists reference materials and other information sources under 13 headings: (1) brief introductions; (2) LC subject headings used for such materials; (3) textbooks; (4) additional titles; (5) glossaries and handbooks; (6)…

Analytic Thermoelectric Couple Modeling: Variable Material Properties and Transient Operation

NASA Technical Reports Server (NTRS)

Mackey, Jonathan A.; Sehirlioglu, Alp; Dynys, Fred

2015-01-01

To gain a deeper understanding of the operation of a thermoelectric couple a set of analytic solutions have been derived for a variable material property couple and a transient couple. Using an analytic approach, as opposed to commonly used numerical techniques, results in a set of useful design guidelines. These guidelines can serve as useful starting conditions for further numerical studies, or can serve as design rules for lab built couples. The analytic modeling considers two cases and accounts for 1) material properties which vary with temperature and 2) transient operation of a couple. The variable material property case was handled by means of an asymptotic expansion, which allows for insight into the influence of temperature dependence on different material properties. The variable property work demonstrated the important fact that materials with identical average Figure of Merits can lead to different conversion efficiencies due to temperature dependence of the properties. The transient couple was investigated through a Greens function approach; several transient boundary conditions were investigated. The transient work introduces several new design considerations which are not captured by the classic steady state analysis. The work helps to assist in designing couples for optimal performance, and also helps assist in material selection.

Chemical hydrogen storage material property guidelines for automotive applications

NASA Astrophysics Data System (ADS)

Semelsberger, Troy A.; Brooks, Kriston P.

2015-04-01

Chemical hydrogen storage is the sought after hydrogen storage media for automotive applications because of the expected low pressure operation (<20 atm), moderate temperature operation (<200 °C), system gravimetric capacities (>0.05 kg H2/kgsystem), and system volumetric capacities (>0.05 kg H2/Lsystem). Currently, the primary shortcomings of chemical hydrogen storage are regeneration efficiency, fuel cost and fuel phase (i.e., solid or slurry phase). Understanding the required material properties to meet the DOE Technical Targets for Onboard Hydrogen Storage Systems is a critical knowledge gap in the hydrogen storage research community. This study presents a set of fluid-phase chemical hydrogen storage material property guidelines for automotive applications meeting the 2017 DOE technical targets. Viable material properties were determined using a boiler-plate automotive system design. The fluid-phase chemical hydrogen storage media considered in this study were neat liquids, solutions, and non-settling homogeneous slurries. Material properties examined include kinetics, heats of reaction, fuel-cell impurities, gravimetric and volumetric hydrogen storage capacities, and regeneration efficiency. The material properties, although not exhaustive, are an essential first step in identifying viable chemical hydrogen storage material properties-and most important, their implications on system mass, system volume and system performance.

Guidelines for the Effective Implementation and Administration of Law-Related Education: Including an Addendum for Guidelines for LRE Instructor Training and Program Evaluation.

ERIC Educational Resources Information Center

Colorado State Dept. of Education, Denver.

This booklet defines law-related education as an educational program for teaching non-lawyers about law, the legal system, and the fundamental principles and values on which constitutional democracy is based. The program's approach is characterized by relevant curriculum materials, interactive teaching strategies, and extensive use of the…

29 CFR Appendix D to Subpart R of... - Illustration of the Use of Control Lines To Demarcate Controlled Decking Zones (CDZs): Non...

Code of Federal Regulations, 2014 CFR

2014-07-01

... Controlled Decking Zones (CDZs): Non-mandatory Guidelines for Complying With § 1926.760(c)(3) D Appendix D... of Control Lines To Demarcate Controlled Decking Zones (CDZs): Non-mandatory Guidelines for Complying..., tapes, or equivalent materials, and supporting stanchions as follows: (i) Each line is rigged and...

29 CFR Appendix D to Subpart R of... - Illustration of the Use of Control Lines To Demarcate Controlled Decking Zones (CDZs): Non...

Code of Federal Regulations, 2011 CFR

2011-07-01

... Controlled Decking Zones (CDZs): Non-mandatory Guidelines for Complying With § 1926.760(c)(3) D Appendix D... of Control Lines To Demarcate Controlled Decking Zones (CDZs): Non-mandatory Guidelines for Complying..., tapes, or equivalent materials, and supporting stanchions as follows: (i) Each line is rigged and...

Bridging the Guideline Implementation Gap: A Systematic, Document-Centered Approach to Guideline Implementation

PubMed Central

Shiffman, Richard N.; Michel, George; Essaihi, Abdelwaheb; Thornquist, Elizabeth

2004-01-01

Objective: A gap exists between the information contained in published clinical practice guidelines and the knowledge and information that are necessary to implement them. This work describes a process to systematize and make explicit the translation of document-based knowledge into workflow-integrated clinical decision support systems. Design: This approach uses the Guideline Elements Model (GEM) to represent the guideline knowledge. Implementation requires a number of steps to translate the knowledge contained in guideline text into a computable format and to integrate the information into clinical workflow. The steps include: (1) selection of a guideline and specific recommendations for implementation, (2) markup of the guideline text, (3) atomization, (4) deabstraction and (5) disambiguation of recommendation concepts, (6) verification of rule set completeness, (7) addition of explanations, (8) building executable statements, (9) specification of origins of decision variables and insertions of recommended actions, (10) definition of action types and selection of associated beneficial services, (11) choice of interface components, and (12) creation of requirement specification. Results: The authors illustrate these component processes using examples drawn from recent experience translating recommendations from the National Heart, Lung, and Blood Institute's guideline on management of chronic asthma into a workflow-integrated decision support system that operates within the Logician electronic health record system. Conclusion: Using the guideline document as a knowledge source promotes authentic translation of domain knowledge and reduces the overall complexity of the implementation task. From this framework, we believe that a better understanding of activities involved in guideline implementation will emerge. PMID:15187061

Understanding Computational Thinking before Programming: Developing Guidelines for the Design of Games to Learn Introductory Programming through Game-Play

ERIC Educational Resources Information Center

Kazimoglu, Cagin; Kiernan, Mary; Bacon, Liz; MacKinnon, Lachlan

2011-01-01

This paper outlines an innovative game-based approach to learning introductory programming that is grounded in the development of computational thinking at an abstract conceptual level, but also provides a direct contextual relationship between game-play and learning traditional introductory programming. The paper proposes a possible model for,…

USM3D Simulations of Saturn V Plume Induced Flow Separation

NASA Technical Reports Server (NTRS)

Deere, Karen; Elmlilgui, Alaa; Abdol-Hamid, K. S.

2011-01-01

The NASA Constellation Program included the Ares V heavy lift cargo vehicle. During the design stage, engineers questioned if the Plume Induced Flow Separation (PIFS) that occurred along Saturn V rocket during moon missions at some flight conditions, would also plague the newly proposed rocket. Computational fluid dynamics (CFD) was offered as a tool for initiating the investigation of PIFS along the Ares V rocket. However, CFD best practice guidelines were not available for such an investigation. In an effort to establish a CFD process and define guidelines for Ares V powered simulations, the Saturn V vehicle was used because PIFS flight data existed. The ideal gas, computational flow solver USM3D was evaluated for its viability in computing PIFS along the Saturn V vehicle with F-1 engines firing. Solutions were computed at supersonic freestream conditions, zero degree angle of attack, zero degree sideslip, and at flight Reynolds numbers. The effects of solution sensitivity to grid refinement, turbulence models, and the engine boundary conditions on the predicted PIFS distance along the Saturn V were discussed and compared to flight data from the Apollo 11 mission AS-506.

Overuse of Diagnostic Imaging for Work-Related Injuries.

PubMed

Clendenin, Brianna Rebecca; Conlon, Helen Acree; Burns, Candace

2017-02-01

Overuse of health care in the United States is a growing concern. This article addresses the use of diagnostic imaging for work-related injuries. Diagnostic imaging drives substantial cost for increases in workers' compensation. Despite guidelines published by the American College of Radiology and the American College of Occupational Medicine and the Official Disability Guidelines, practitioners are prematurely ordering imaging sooner than recommended. Workers are exposed to unnecessary radiation and are incurring increasing costs without evidence of better outcomes. Practitioners caring for workers and submitting workers' compensation claims should adhere to official guidelines, using their professional judgment to consider financial impact and health outcomes of diagnostic imaging including computed tomography, magnetic resonance imaging, nuclear medicine imaging, radiography, and ultrasound.

Protecting Digital Evidence Integrity by Using Smart Cards

NASA Astrophysics Data System (ADS)

Saleem, Shahzad; Popov, Oliver

RFC 3227 provides general guidelines for digital evidence collection and archiving, while the International Organization on Computer Evidence offers guidelines for best practice in the digital forensic examination. In the light of these guidelines we will analyze integrity protection mechanism provided by EnCase and FTK which is mainly based on Message Digest Codes (MDCs). MDCs for integrity protection are not tamper proof, hence they can be forged. With the proposed model for protecting digital evidence integrity by using smart cards (PIDESC) that establishes a secure platform for digitally signing the MDC (in general for a whole range of cryptographic services) in combination with Public Key Cryptography (PKC), one can show that this weakness might be overcome.

The Physician's Role in Prevention. Adolescent Alcoholism: Recognizing, Intervening, and Treating Series No. 2.

ERIC Educational Resources Information Center

Fisher, Joseph V.; Krol, Ronald A.

This document is one of seven publications contained in a series of materials for physicians on recognizing, intervening with, and treating adolescent alcoholism. The materials in this unit of study offer guidelines to help physicians make responsible and informed decisions about their roles with adolescent patients. Materials are presented which…

The Preservation and Restoration of Photographic Materials in Archives and Libraries: A RAMP Study with Guidelines.

ERIC Educational Resources Information Center

Hendriks, Klaus B.

Intended for use by archivists, curators, and others responsible for the acquisition and preservation of documentary materials in photographic form, this publication describes the nature of photographic media and recommended conservation measures. It is noted that the major emphasis is on black-and-white photographic materials, with some…

Developing Health and Family Planning Print Materials for Low-Literate Audiences: A Guide.

ERIC Educational Resources Information Center

Zimmerman, Margot; And Others

This manual offers guidelines for developing health and family planning support materials for illiterate and low-literate groups. The techniques used rely heavily on involvement of the target audience. Following the introduction, each of the nine sections of the guide discusses a separate step in the materials development process: (1) "target…

Creating Readable Handouts, Worksheets, Overheads, Tests, Review Materials, Study Guides, and Homework Assignments through Effective Typographic Design.

ERIC Educational Resources Information Center

Hoener, Arthur; And Others

1997-01-01

This article presents guidelines for using the principles of typography to enhance the readability and legibility of classroom print materials for students with mild disabilities. Different elements of type, line length, page margins, and spacing are addressed. Recommendations for preparing materials that promote student performance are provided.…

Developing Instructional Materials for Productive Skills. Report of a Study Group Meeting (Jakarta, Indonesia, October 2-17, 1979).

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Bangkok (Thailand). Regional Office for Education in Asia and Oceania.

In October 1979, representatives of six of the twenty member nations of the Asia Programme of Educational Innovation for Development met in Indonesia to discuss formulation of guidelines for developing instructional materials for teaching productive skills. This report on that conference begins with comments on experiences in materials development…

META-GLARE: A meta-system for defining your own computer interpretable guideline system-Architecture and acquisition.

PubMed

Bottrighi, Alessio; Terenziani, Paolo

2016-09-01

Several different computer-assisted management systems of computer interpretable guidelines (CIGs) have been developed by the Artificial Intelligence in Medicine community. Each CIG system is characterized by a specific formalism to represent CIGs, and usually provides a manager to acquire, consult and execute them. Though there are several commonalities between most formalisms in the literature, each formalism has its own peculiarities. The goal of our work is to provide a flexible support to the extension or definition of CIGs formalisms, and of their acquisition and execution engines. Instead of defining "yet another CIG formalism and its manager", we propose META-GLARE (META Guideline Acquisition, Representation, and Execution), a "meta"-system to define new CIG systems. In this paper, META-GLARE, a meta-system to define new CIG systems, is presented. We try to capture the commonalities among current CIG approaches, by providing (i) a general manager for the acquisition, consultation and execution of hierarchical graphs (representing the control flow of actions in CIGs), parameterized over the types of nodes and of arcs constituting it, and (ii) a library of different elementary components of guidelines nodes (actions) and arcs, in which each type definition involves the specification of how objects of this type can be acquired, consulted and executed. We provide generality and flexibility, by allowing free aggregations of such elementary components to define new primitive node and arc types. We have drawn several experiments, in which we have used META-GLARE to build a CIG system (Experiment 1 in Section 8), or to extend it (Experiments 2 and 3). Such experiments show that META-GLARE provides a useful and easy-to-use support to such tasks. For instance, re-building the Guideline Acquisition, Representation, and Execution (GLARE) system using META-GLARE required less than one day (Experiment 1). META-GLARE is a meta-system for CIGs supporting fast prototyping. Since META-GLARE provides acquisition and execution engines that are parametric over the specific CIG formalism, it supports easy update and construction of CIG systems. Copyright © 2016 Elsevier B.V. All rights reserved.

X-ray

MedlinePlus

... The images are recorded on a computer or film. Structures that are dense (such as bone) will ... Guidelines Viewers & Players MedlinePlus Connect for EHRs For Developers U.S. National Library of Medicine 8600 Rockville Pike, ...

Retrograde cystography

MedlinePlus

... of computed tomography, magnetic resonance imaging, and plain film. In: Wein AJ, Kavoussi LR, Partin AW, Peters ... Guidelines Viewers & Players MedlinePlus Connect for EHRs For Developers U.S. National Library of Medicine 8600 Rockville Pike, ...

Educational Software--New Guidelines for Development.

ERIC Educational Resources Information Center

Gold, Patricia Cohen

1984-01-01

Discusses standards developed by the Educational Computer Service of the National Education Association that incorporate technical, educational, and documentation components to guide authors in the development of quality educational software. (Author/MBR)

43 CFR 44.23 - How does the Department certify payment computations?

Code of Federal Regulations, 2013 CFR

2013-10-01

... Certified Public Accountant, or an independent public accountant, that the statement has been audited in... guidelines that State auditors, independent Certified Public Accountants, or independent public accountants...

43 CFR 44.23 - How does the Department certify payment computations?

Code of Federal Regulations, 2011 CFR

2011-10-01

... Certified Public Accountant, or an independent public accountant, that the statement has been audited in... guidelines that State auditors, independent Certified Public Accountants, or independent public accountants...

43 CFR 44.23 - How does the Department certify payment computations?

Code of Federal Regulations, 2012 CFR

2012-10-01

... Certified Public Accountant, or an independent public accountant, that the statement has been audited in... guidelines that State auditors, independent Certified Public Accountants, or independent public accountants...

43 CFR 44.23 - How does the Department certify payment computations?

Code of Federal Regulations, 2014 CFR

2014-10-01

... Certified Public Accountant, or an independent public accountant, that the statement has been audited in... guidelines that State auditors, independent Certified Public Accountants, or independent public accountants...

Utah Work-Based Learning Manual.

ERIC Educational Resources Information Center

Utah State Office of Education, Salt Lake City.

This document presents materials to assist Utah school personnel who are initiating, implementing, or improving work-based learning opportunities for students. The document presents detailed guidelines for creating and maintaining work-based learning systems in schools and resource materials for improving existing work-based opportunities. Formal…

40 CFR 246.200-8 - Recommended procedures: Cost analysis.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) SOLID WASTES SOURCE SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures..., storage, and transportation costs have been made, and estimated tonnages of both recoverable high-grade... for revenue from paper sales and savings from diverting recycled materials from disposal. Potential...

Liquid and gaseous oxygen safety review

NASA Technical Reports Server (NTRS)

Lapin, A.

1973-01-01

Materials used in oxygen systems and allowable oxygen environments are specified for each material. Design criteria, cleaning procedures and quality control methods are covered. Guidelines for protection against hazards involved with production, transportation, storage and use of oxygen are presented. Study also lists extensive references.

An Evaluation of Ecotoxicity Test Guidelines: Their Adequacy for Nanomaterials

EPA Science Inventory

Advances in nanotechnology are resulting in the production of new nanomaterials at a rapid pace. Driving the dramatic development of new materials and products is the prospect of stronger and lighter materials, better and more efficient energy systems, potential tremendous benefi...

7 CFR 272.3 - Operating guidelines and forms.

Code of Federal Regulations, 2011 CFR

2011-01-01

... of the materials within the State. (4) If deficiencies are discovered in a State agency's materials...; (iii) Anticipated impact on service to participants or potential participants who would be affected... Finding Aids section of the printed volume and at www.fdsys.gov. ...

7 CFR 272.3 - Operating guidelines and forms.

Code of Federal Regulations, 2014 CFR

2014-01-01

... of the materials within the State. (4) If deficiencies are discovered in a State agency's materials...; (iii) Anticipated impact on service to participants or potential participants who would be affected... Finding Aids section of the printed volume and at www.fdsys.gov. ...

7 CFR 272.3 - Operating guidelines and forms.

Code of Federal Regulations, 2013 CFR

2013-01-01

... of the materials within the State. (4) If deficiencies are discovered in a State agency's materials...; (iii) Anticipated impact on service to participants or potential participants who would be affected... Finding Aids section of the printed volume and at www.fdsys.gov. ...

7 CFR 272.3 - Operating guidelines and forms.

Code of Federal Regulations, 2012 CFR

2012-01-01

... of the materials within the State. (4) If deficiencies are discovered in a State agency's materials...; (iii) Anticipated impact on service to participants or potential participants who would be affected... Finding Aids section of the printed volume and at www.fdsys.gov. ...

A Perspective on Computational Human Performance Models as Design Tools

NASA Technical Reports Server (NTRS)

Jones, Patricia M.

2010-01-01

The design of interactive systems, including levels of automation, displays, and controls, is usually based on design guidelines and iterative empirical prototyping. A complementary approach is to use computational human performance models to evaluate designs. An integrated strategy of model-based and empirical test and evaluation activities is particularly attractive as a methodology for verification and validation of human-rated systems for commercial space. This talk will review several computational human performance modeling approaches and their applicability to design of display and control requirements.

Photoconductivity enhancement and charge transport properties in ruthenium-containing block copolymer/carbon nanotube hybrids.

PubMed

Lo, Kin Cheung; Hau, King In; Chan, Wai Kin

2018-04-05

Functional polymer/carbon nanotube (CNT) hybrid materials can serve as a good model for light harvesting systems based on CNTs. This paper presents the synthesis of block copolymer/CNT hybrids and the characterization of their photocurrent responses by both experimental and computational approaches. A series of functional diblock copolymers was synthesized by reversible addition-fragmentation chain transfer polymerizations for the dispersion and functionalization of CNTs. The block copolymers contain photosensitizing ruthenium complexes and modified pyrene-based anchoring units. The photocurrent responses of the polymer/CNT hybrids were measured by photoconductive atomic force microscopy (PCAFM), from which the experimental data were analyzed by vigorous statistical models. The difference in photocurrent response among different hybrids was correlated to the conformations of the hybrids, which were elucidated by molecular dynamics simulations, and the electronic properties of polymers. The photoresponse of the block copolymer/CNT hybrids can be enhanced by introducing an electron-accepting block between the photosensitizing block and the CNT. We have demonstrated that the application of a rigorous statistical methodology can unravel the charge transport properties of these hybrid materials and provide general guidelines for the design of molecular light harvesting systems.

Developing computer training programs for blood bankers.

PubMed

Eisenbrey, L

1992-01-01

Two surveys were conducted in July 1991 to gather information about computer training currently performed within American Red Cross Blood Services Regions. One survey was completed by computer trainers from software developer-vendors and regional centers. The second survey was directed to the trainees, to determine their perception of the computer training. The surveys identified the major concepts, length of training, evaluations, and methods of instruction used. Strengths and weaknesses of training programs were highlighted by trainee respondents. Using the survey information and other sources, recommendations (including those concerning which computer skills and tasks should be covered) are made that can be used as guidelines for developing comprehensive computer training programs at any blood bank or blood center.

Integrating geographical information and augmented reality techniques for mobile escape guidelines on nuclear accident sites.

PubMed

Tsai, Ming-Kuan; Lee, Yung-Ching; Lu, Chung-Hsin; Chen, Mei-Hsin; Chou, Tien-Yin; Yau, Nie-Jia

2012-07-01

During nuclear accidents, when radioactive materials spread into the environment, the people in the affected areas should evacuate immediately. However, few information systems are available regarding escape guidelines for nuclear accidents. Therefore, this study constructs escape guidelines on mobile phones. This application is called Mobile Escape Guidelines (MEG) and adopts two techniques. One technique is the geographical information that offers multiple representations; the other is the augmented reality that provides semi-realistic information services. When this study tested the mobile escape guidelines, the results showed that this application was capable of identifying the correct locations of users, showing the escape routes, filtering geographical layers, and rapidly generating the relief reports. Users could evacuate from nuclear accident sites easily, even without relief personnel, since using slim devices to access the mobile escape guidelines is convenient. Overall, this study is a useful reference for a nuclear accident emergency response. Copyright © 2012 Elsevier Ltd. All rights reserved.

The Development of Human Factor Guidelines for Unmanned Aircraft System Control Stations

NASA Technical Reports Server (NTRS)

Hobbs, Alan

2014-01-01

Despite being referred to as unmanned some of the major challenges confronting unmanned aircraft systems (UAS) relate to human factors. NASA is conducting research to address the human factors relevant to UAS access to non-segregated airspace. This work covers the issues of pilot performance, interaction with ATC, and control station design. A major outcome of this research will be recommendations for human factors design guidelines for UAS control stations to support routine beyond-line-of-sight operations in the US national airspace system (NAS). To be effective, guidelines must be relevant to a wide range of systems, must not be overly prescriptive, and must not impose premature standardization on evolving technologies. In developing guidelines, we recognize that existing regulatory and guidance material may already provide adequate coverage of certain issues. In other cases suitable guidelines may be found in existing military or industry human factors standards. In cases where appropriate existing standards cannot be identified, original guidelines will be proposed.

Safety of 8-weeks oral administration of Arctium lappa L.

PubMed

Bok, So-Hyeon; Cho, Seung Sik; Bae, Chun-Sik; Park, Dae-Hun; Park, Kyung-Mok

2017-09-01

Recently, worldwide dietary reference intakes have been considered an important guideline for public health. Some governments and the World Health Organization (WHO) provide guidelines concerning dietary intake. Although an ingredient may have a history of use as a culinary material, changes in the environment over time suggest that the acceptable maximum intake each of food/culinary material should be regularly evaluated. Arctium lappa L. has been used as a culinary material for many centuries in Korea and Japan and some recent studies have reported related therapeutic effects. However, there are no reports on the safety of repeated oral administration. In this study, we evaluated the safety of a 8-weeks repeated oral intake of A. lappa . We concluded that treatment with <250 mg/kg A. lappa , which was within the safety range, resulted in body weight decrease and blood glucose suppression.

Computational Modeling of Mixed Solids for CO2 CaptureSorbents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duan, Yuhua

2015-01-01

Since current technologies for capturing CO2 to fight global climate change are still too energy intensive, there is a critical need for development of new materials that can capture CO2 reversibly with acceptable energy costs. Accordingly, solid sorbents have been proposed to be used for CO2 capture applications through a reversible chemical transformation. By combining thermodynamic database mining with first principles density functional theory and phonon lattice dynamics calculations, a theoretical screening methodology to identify the most promising CO2 sorbent candidates from the vast array of possible solid materials has been proposed and validated. The calculated thermodynamic properties of differentmore » classes of solid materials versus temperature and pressure changes were further used to evaluate the equilibrium properties for the CO2 adsorption/desorption cycles. According to the requirements imposed by the pre- and post- combustion technologies and based on our calculated thermodynamic properties for the CO2 capture reactions by the solids of interest, we were able to screen only those solid materials for which lower capture energy costs are expected at the desired pressure and temperature conditions. Only those selected CO2 sorbent candidates were further considered for experimental validations. The ab initio thermodynamic technique has the advantage of identifying thermodynamic properties of CO2 capture reactions without any experimental input beyond crystallographic structural information of the solid phases involved. Such methodology not only can be used to search for good candidates from existing database of solid materials, but also can provide some guidelines for synthesis new materials. In this presentation, we apply our screening methodology to mixing solid systems to adjust the turnover temperature to help on developing CO2 capture Technologies.« less