12 CFR 21.21 - Procedures for monitoring Bank Secrecy Act (BSA) compliance.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 1 2012-01-01 2012-01-01 false Procedures for monitoring Bank Secrecy Act (BSA... MINIMUM SECURITY DEVICES AND PROCEDURES, REPORTS OF SUSPICIOUS ACTIVITIES, AND BANK SECRECY ACT COMPLIANCE PROGRAM Procedures for Monitoring Bank Secrecy Act Compliance § 21.21 Procedures for monitoring Bank...

12 CFR 21.21 - Procedures for monitoring Bank Secrecy Act (BSA) compliance.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 1 2013-01-01 2013-01-01 false Procedures for monitoring Bank Secrecy Act (BSA... MINIMUM SECURITY DEVICES AND PROCEDURES, REPORTS OF SUSPICIOUS ACTIVITIES, AND BANK SECRECY ACT COMPLIANCE PROGRAM Procedures for Monitoring Bank Secrecy Act Compliance § 21.21 Procedures for monitoring Bank...

12 CFR 21.21 - Procedures for monitoring Bank Secrecy Act (BSA) compliance.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 1 2014-01-01 2014-01-01 false Procedures for monitoring Bank Secrecy Act (BSA... MINIMUM SECURITY DEVICES AND PROCEDURES, REPORTS OF SUSPICIOUS ACTIVITIES, AND BANK SECRECY ACT COMPLIANCE PROGRAM Procedures for Monitoring Bank Secrecy Act Compliance § 21.21 Procedures for monitoring Bank...

12 CFR 21.21 - Procedures for monitoring Bank Secrecy Act (BSA) compliance.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 1 2011-01-01 2011-01-01 false Procedures for monitoring Bank Secrecy Act (BSA... MINIMUM SECURITY DEVICES AND PROCEDURES, REPORTS OF SUSPICIOUS ACTIVITIES, AND BANK SECRECY ACT COMPLIANCE PROGRAM Procedures for Monitoring Bank Secrecy Act Compliance § 21.21 Procedures for monitoring Bank...

12 CFR 21.21 - Procedures for monitoring Bank Secrecy Act (BSA) compliance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Procedures for monitoring Bank Secrecy Act (BSA... MINIMUM SECURITY DEVICES AND PROCEDURES, REPORTS OF SUSPICIOUS ACTIVITIES, AND BANK SECRECY ACT COMPLIANCE PROGRAM Procedures for Monitoring Bank Secrecy Act Compliance § 21.21 Procedures for monitoring Bank...

40 CFR 53.51 - Demonstration of compliance with design specifications and manufacturing and test requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... compliance with design specifications and manufacturing and test requirements. (a) Overview. (1) Paragraphs... document its post-manufacturing test procedures. As a minimum, each test shall consist of the following... 40 Protection of Environment 5 2011-07-01 2011-07-01 false Demonstration of compliance with design...

40 CFR 53.51 - Demonstration of compliance with design specifications and manufacturing and test requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... compliance with design specifications and manufacturing and test requirements. (a) Overview. (1) Paragraphs... document its post-manufacturing test procedures. As a minimum, each test shall consist of the following... 40 Protection of Environment 6 2014-07-01 2014-07-01 false Demonstration of compliance with design...

40 CFR 53.51 - Demonstration of compliance with design specifications and manufacturing and test requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... compliance with design specifications and manufacturing and test requirements. (a) Overview. (1) Paragraphs... document its post-manufacturing test procedures. As a minimum, each test shall consist of the following... 40 Protection of Environment 6 2013-07-01 2013-07-01 false Demonstration of compliance with design...

40 CFR 53.51 - Demonstration of compliance with design specifications and manufacturing and test requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... compliance with design specifications and manufacturing and test requirements. (a) Overview. (1) Paragraphs... document its post-manufacturing test procedures. As a minimum, each test shall consist of the following... 40 Protection of Environment 6 2012-07-01 2012-07-01 false Demonstration of compliance with design...

A novel algorithm using an orthotropic material model for topology optimization

NASA Astrophysics Data System (ADS)

Tong, Liyong; Luo, Quantian

2017-09-01

This article presents a novel algorithm for topology optimization using an orthotropic material model. Based on the virtual work principle, mathematical formulations for effective orthotropic material properties of an element containing two materials are derived. An algorithm is developed for structural topology optimization using four orthotropic material properties, instead of one density or area ratio, in each element as design variables. As an illustrative example, minimum compliance problems for linear and nonlinear structures are solved using the present algorithm in conjunction with the moving iso-surface threshold method. The present numerical results reveal that: (1) chequerboards and single-node connections are not present even without filtering; (2) final topologies do not contain large grey areas even using a unity penalty factor; and (3) the well-known numerical issues caused by low-density material when considering geometric nonlinearity are resolved by eliminating low-density elements in finite element analyses.

Active counter electrode in a-SiC electrochemical metallization memory

NASA Astrophysics Data System (ADS)

Morgan, K. A.; Fan, J.; Huang, R.; Zhong, L.; Gowers, R.; Ou, J. Y.; Jiang, L.; De Groot, C. H.

2017-08-01

Cu/amorphous-SiC (a-SiC) electrochemical metallization memory cells have been fabricated with two different counter electrode (CE) materials, W and Au, in order to investigate the role of CEs in a non-oxide semiconductor switching matrix. In a positive bipolar regime with Cu filaments forming and rupturing, the CE influences the OFF state resistance and minimum current compliance. Nevertheless, a similarity in SET kinetics is seen for both CEs, which differs from previously published SiO2 memories, confirming that CE effects are dependent on the switching layer material or type. Both a-SiC memories are able to switch in the negative bipolar regime, indicating Au and W filaments. This confirms that CEs can play an active role in a non-oxide semiconducting switching matrix, such as a-SiC. By comparing both Au and W CEs, this work shows that W is superior in terms of a higher R OFF/R ON ratio, along with the ability to switch at lower current compliances making it a favourable material for future low energy applications. With its CMOS compatibility, a-SiC/W is an excellent choice for future resistive memory applications.

40 CFR 60.37e - Compliance, performance testing, and monitoring guidelines.

Code of Federal Regulations, 2010 CFR

2010-07-01

... requirements: (1) Establish maximum charge rate and minimum secondary chamber temperature as site-specific... above the maximum charge rate or below the minimum secondary chamber temperature measured as 3-hour... below the minimum secondary chamber temperature shall constitute a violation of the established...

49 CFR 536.9 - Use of credits with regard to the domestically manufactured passenger automobile minimum standard.

Code of Federal Regulations, 2012 CFR

2012-10-01

... manufactured passenger automobile minimum standard. 536.9 Section 536.9 Transportation Other Regulations... domestically manufactured passenger automobile minimum standard. (a) Each manufacturer is responsible for..., the domestically manufactured passenger automobile compliance category credit excess or shortfall is...

49 CFR 536.9 - Use of credits with regard to the domestically manufactured passenger automobile minimum standard.

Code of Federal Regulations, 2013 CFR

2013-10-01

... manufactured passenger automobile minimum standard. 536.9 Section 536.9 Transportation Other Regulations... domestically manufactured passenger automobile minimum standard. (a) Each manufacturer is responsible for..., the domestically manufactured passenger automobile compliance category credit excess or shortfall is...

49 CFR 536.9 - Use of credits with regard to the domestically manufactured passenger automobile minimum standard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... manufactured passenger automobile minimum standard. 536.9 Section 536.9 Transportation Other Regulations... domestically manufactured passenger automobile minimum standard. (a) Each manufacturer is responsible for..., the domestically manufactured passenger automobile compliance category credit excess or shortfall is...

49 CFR 536.9 - Use of credits with regard to the domestically manufactured passenger automobile minimum standard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... manufactured passenger automobile minimum standard. 536.9 Section 536.9 Transportation Other Regulations... domestically manufactured passenger automobile minimum standard. (a) Each manufacturer is responsible for..., the domestically manufactured passenger automobile compliance category credit excess or shortfall is...

49 CFR 536.9 - Use of credits with regard to the domestically manufactured passenger automobile minimum standard.

Code of Federal Regulations, 2014 CFR

2014-10-01

... manufactured passenger automobile minimum standard. 536.9 Section 536.9 Transportation Other Regulations... domestically manufactured passenger automobile minimum standard. (a) Each manufacturer is responsible for..., the domestically manufactured passenger automobile compliance category credit excess or shortfall is...

40 CFR 63.8690 - How do I monitor and collect data to demonstrate continuous compliance?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Processing and Asphalt Roofing Manufacturing Continuous Compliance Requirements § 63.8690 How do I monitor... emission or operating levels, nor may such data be used in fulfilling a minimum data availability...

78 FR 19734 - Notice of Proposed Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-02

... and Enforcement. ACTION: Notice and request for comments. SUMMARY: In compliance with the Paperwork... information for Permit Applications--Minimum Requirements for Legal, Financial, Compliance, and Related... expected burden and cost. DATES: Comments on the proposed information collection must be received by June 3...

40 CFR Table 9 to Subpart Xxxx of... - Minimum Data for Continuous Compliance With the Emission Limits for Tire Production Affected Sources

Code of Federal Regulations, 2010 CFR

2010-07-01

... cement and solvent as purchased. 2. Sources complying with the monthly average compliance alternative... maintain . . . 1. Sources complying with purchase compliance alternative in § 63.5985(a) that are meeting the HAP constituent emission limit (option 1) in Table 1 to this subpart a. A list of each cement and...

40 CFR 63.1257 - Test methods and compliance procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

...)(2), or 63.1256(h)(2)(i)(C) with a minimum residence time of 0.5 seconds and a minimum temperature of... temperature of the organic HAP, must consider the vent stream flow rate, and must establish the design minimum and average temperature in the combustion zone and the combustion zone residence time. (B) For a...

40 CFR 63.1257 - Test methods and compliance procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

...)(2), or 63.1256(h)(2)(i)(C) with a minimum residence time of 0.5 seconds and a minimum temperature of... temperature of the organic HAP, must consider the vent stream flow rate, and must establish the design minimum and average temperature in the combustion zone and the combustion zone residence time. (B) For a...

40 CFR 63.1257 - Test methods and compliance procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

...)(2), or 63.1256(h)(2)(i)(C) with a minimum residence time of 0.5 seconds and a minimum temperature of... temperature of the organic HAP, must consider the vent stream flow rate, and must establish the design minimum and average temperature in the combustion zone and the combustion zone residence time. (B) For a...

76 FR 23631 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-27

... non-compliance with the Commission's minimum performance standards regarding registered transfer agents, and (2) to assure that issuers are aware of certain problems and poor performances with respect... notice of a registered transfer agent's failure to comply with the Commission's minimum performance...

Truss topology optimization with simultaneous analysis and design

NASA Technical Reports Server (NTRS)

Sankaranarayanan, S.; Haftka, Raphael T.; Kapania, Rakesh K.

1992-01-01

Strategies for topology optimization of trusses for minimum weight subject to stress and displacement constraints by Simultaneous Analysis and Design (SAND) are considered. The ground structure approach is used. A penalty function formulation of SAND is compared with an augmented Lagrangian formulation. The efficiency of SAND in handling combinations of general constraints is tested. A strategy for obtaining an optimal topology by minimizing the compliance of the truss is compared with a direct weight minimization solution to satisfy stress and displacement constraints. It is shown that for some problems, starting from the ground structure and using SAND is better than starting from a minimum compliance topology design and optimizing only the cross sections for minimum weight under stress and displacement constraints. A member elimination strategy to save CPU time is discussed.

30 CFR 778.1 - Scope and purpose.

Code of Federal Regulations, 2010 CFR

2010-07-01

... MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY PROGRAMS PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR LEGAL, FINANCIAL, COMPLIANCE, AND RELATED INFORMATION § 778.1 Scope and... mining and reclamation operations under a State or Federal program. This part covers minimum legal...

Analysis of some compliance calibration data for chevron-notch bar and rod specimens

NASA Technical Reports Server (NTRS)

Orange, Thomas W.; Bubsey, Raymond T.; Pierce, William S.; Shannon, John L., Jr.

1991-01-01

A set of equations describing certain fracture mechanics parameters for chevron-notch bar and rod specimens are presented. They are developed by fitting earlier compliance calibration data. The difficulty in determining the minimum stress intensity coefficient and the critical crack length is discussed.

33 CFR 151.2036 - Extension of compliance date.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Extension of compliance date. 151.2036 Section 151.2036 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... posted on the Internet. Extensions will be for no longer than the minimum time needed, as determined by...

33 CFR 151.2036 - Extension of compliance date.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Extension of compliance date. 151.2036 Section 151.2036 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... posted on the Internet. Extensions will be for no longer than the minimum time needed, as determined by...

33 CFR 151.2036 - Extension of compliance date.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Extension of compliance date. 151.2036 Section 151.2036 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY... posted on the Internet. Extensions will be for no longer than the minimum time needed, as determined by...

Regulations: Can They Control Staff Compliance in Human Services Systems?

ERIC Educational Resources Information Center

Jacobson, John W.

1990-01-01

This article discusses results of regulations for Intermediate Care Facilities for the Mentally Retarded, arguing that, by establishing minimum standards for funding, these policies promote mediocrity. Strategies for promoting compliance behaviors are offered, as are observations on regulatory reform and the process of regulatory impact. (PB)

77 FR 64374 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-19

... internal safety audits to evaluate compliance with SSPP and measure its effectiveness. An annual report identifying the audits performed and any corrective action must be submitted to the New Jersey Department of... audit. In addition, NJDOT conducts a safety review a minimum of once every 3 years to evaluate the...

10 CFR 431.36 - Compliance Certification.

Code of Federal Regulations, 2014 CFR

2014-01-01

... EQUIPMENT Electric Motors Certification § 431.36 Compliance Certification. (a) General. A manufacturer or private labeler shall not distribute in commerce any basic model of an electric motor which is subject to... efficiency for each basic model of electric motor distributed is not less than the minimum nominal full load...

10 CFR 431.36 - Compliance Certification.

Code of Federal Regulations, 2013 CFR

2013-01-01

... EQUIPMENT Electric Motors Certification § 431.36 Compliance Certification. (a) General. A manufacturer or private labeler shall not distribute in commerce any basic model of an electric motor which is subject to... efficiency for each basic model of electric motor distributed is not less than the minimum nominal full load...

Concurrent design of composite materials and structures considering thermal conductivity constraints

NASA Astrophysics Data System (ADS)

Jia, J.; Cheng, W.; Long, K.

2017-08-01

This article introduces thermal conductivity constraints into concurrent design. The influence of thermal conductivity on macrostructure and orthotropic composite material is extensively investigated using the minimum mean compliance as the objective function. To simultaneously control the amounts of different phase materials, a given mass fraction is applied in the optimization algorithm. Two phase materials are assumed to compete with each other to be distributed during the process of maximizing stiffness and thermal conductivity when the mass fraction constraint is small, where phase 1 has superior stiffness and thermal conductivity whereas phase 2 has a superior ratio of stiffness to density. The effective properties of the material microstructure are computed by a numerical homogenization technique, in which the effective elasticity matrix is applied to macrostructural analyses and the effective thermal conductivity matrix is applied to the thermal conductivity constraint. To validate the effectiveness of the proposed optimization algorithm, several three-dimensional illustrative examples are provided and the features under different boundary conditions are analysed.

30 CFR 947.784 - Underground mining permit applications-minimum requirements for reclamation and operation plan.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes... for an underground mining permit shall also indicate how compliance will be achieved with the Washington Water Pollution Control Act, RCW 90.48. ...

Has compliance with CLIA requirements really improved quality in US clinical laboratories?

PubMed

Ehrmeyer, Sharon S; Laessig, Ronald H

2004-08-02

The Clinical Laboratory Improvement Amendments of 1988 (CLIA'88) mandate universal requirements for all U.S. clinical laboratory-testing sites. The intent of CLIA'88 is to ensure quality testing through a combination of minimum quality practices that incorporate total quality management concepts. These regulations do not contain established, objective indicators or measures to assess quality. However, there is an implicit assumption that compliance with traditionally accepted good laboratory practices--following manufacturers' directions, routinely analysing quality control materials, applying quality assurance principles, employing and assessing competent testing personnel, and participating in external quality assessment or proficiency testing (PT)--will result in improved test quality. The CLIA'88 regulations do include PT performance standards, which intentionally or unintentionally, define intra-laboratory performance. Passing PT has become a prime motivation for improving laboratory performance; it can also be used as an objective indicator to assess whether compliance to CLIA has improved intra-laboratory quality. Data from 1994 through 2002 indicate that the percentage of laboratories passing PT has increased. In addition to PT performance, subjective indicators of improved quality--frequency of inspection deficiencies, the number of government sanctions for non-compliance, and customer satisfaction--were evaluated. The results from these subjective indicators are more difficult to interpret but also seem to show improved quality in US clinical laboratories eleven years post-CLIA'88.

40 CFR 63.1365 - Test methods and initial compliance procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... design minimum and average temperature in the combustion zone and the combustion zone residence time. (B... establish the design minimum and average flame zone temperatures and combustion zone residence time, and... carbon bed temperature after regeneration, design carbon bed regeneration time, and design service life...

40 CFR 600.010-08 - Vehicle test requirements and minimum data requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... data requirements. 600.010-08 Section 600.010-08 Protection of Environment ENVIRONMENTAL PROTECTION... requirements and minimum data requirements. (a) Unless otherwise exempted from specific emission compliance... applicable): (1) The manufacturer shall generate FTP fuel economy data by testing according to the applicable...

12 CFR 21.3 - Security program.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 1 2014-01-01 2014-01-01 false Security program. 21.3 Section 21.3 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY MINIMUM SECURITY DEVICES AND PROCEDURES, REPORTS OF SUSPICIOUS ACTIVITIES, AND BANK SECRECY ACT COMPLIANCE PROGRAM Minimum Security Devices and...

12 CFR 21.3 - Security program.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 1 2013-01-01 2013-01-01 false Security program. 21.3 Section 21.3 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY MINIMUM SECURITY DEVICES AND PROCEDURES, REPORTS OF SUSPICIOUS ACTIVITIES, AND BANK SECRECY ACT COMPLIANCE PROGRAM Minimum Security Devices and...

12 CFR 21.3 - Security program.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 1 2011-01-01 2011-01-01 false Security program. 21.3 Section 21.3 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY MINIMUM SECURITY DEVICES AND PROCEDURES, REPORTS OF SUSPICIOUS ACTIVITIES, AND BANK SECRECY ACT COMPLIANCE PROGRAM Minimum Security Devices and...

29 CFR 780.1 - General scope of the Act.

Code of Federal Regulations, 2010 CFR

2010-07-01

... application which establishes minimum wage, overtime pay, equal pay, and child labor requirements that apply... for compliance and, in the event of violations, to supervise the payment of unpaid minimum wages or... Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR STATEMENTS OF GENERAL...

40 CFR 60.2710 - How do I demonstrate continuous compliance with the emission limitations and the operating limits?

Code of Federal Regulations, 2012 CFR

2012-07-01

... NEW STATIONARY SOURCES Emissions Guidelines and Compliance Times for Commercial and Industrial Solid...-to-fuel switch. (4) If you own or operate an existing commercial or industrial combustion unit that... internal and external corrosion. (3) Use a pressure sensor with a minimum tolerance of 1.27 centimeters of...

34 CFR 379.50 - What are the requirements for continuation funding?

Code of Federal Regulations, 2011 CFR

2011-07-01

... What Compliance Indicator Requirements Must a Grantee Meet To Receive Continuation Funding? § 379.50...; and (b) Meet the minimum performance levels on— (1) The two “primary” program compliance indicators... indicators identified in § 379.51(c) and described in § 379.53(b). (Authority: Section 611(f)(4) of the Act...

Non-compliance with ACS-COT recommended criteria for full trauma team activation is associated with undertriage deaths.

PubMed

Tignanelli, Christopher J; Vander Kolk, Wayne E; Mikhail, Judy N; Delano, Matthew J; Hemmila, Mark R

2017-11-21

The appropriate triage of acutely injured patients within a trauma system is associated with improved rates of mortality and optimal resource utilization. The American College of Surgeons Committee on Trauma (ACS-COT) put forward six minimum criteria (ACS-6) for full trauma team activation (TTA). We hypothesized that ACS-COT verified trauma center compliance with these criteria is associated with low under-triage rates and improved overall mortality. Data from a state-wide collaborative quality initiative was utilized. We used data collected from 2014 through 2016 at 29 ACS verified level 1 and 2 trauma centers. Inclusion criteria were: adult patients (≥16 years) and ISS ≥5. Quantitative data existed to analyze four of the ACS-6 criteria (ED SBP≤90 mmHg, respiratory compromise/intubation, central GSW, and GCS<9). Patients were considered to be under-triaged if they had major trauma (ISS>15) and did not receive a full TTA. 51,792 patients were included in the study. Compliance with ACS-6 minimum criteria for full TTA varied from 51% to 82%. Presence of any ACS-6 criteria was associated with a high intervention rate and significant risk of mortality (OR 16.7, 95% CI 15.2-18.3, p<0.001). Of the 1004 deaths that were not a full activation, 433 (43%) were classified as under-triaged, and 301 (30%) had at least one ACS-6 criteria present. Under-triaged patients with any ACS-6 criteria were more likely to die than those who were not under-triaged (30% vs 21%, p=0.001). GCS<9 and need for emergent intubation were the ACS-6 criteria most frequently associated with under-triage mortality. Compliance with ACS-COT minimum criteria for full TTA remains sub-optimal and undertriage is associated with increased mortality. This data suggests that the most efficient quality improvement measure around triage should be ensuring compliance with the ACS-6 criteria. This study suggests that practice pattern modification to more strictly adhere to the minimum ACS-COT criteria for full TTA will save lives. Diagnostic Tests or Criteria, Level III.

30 CFR 784.16 - Reclamation plan: Siltation structures, impoundments, and refuse piles.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Resources Conservation Service's Web site athttp://www.info.usda.gov/scripts/lpsiis.dll/TR/TR_210_60.htm... State program approval process engineering design standards that ensure stability comparable to a 1.3 minimum static safety factor in lieu of engineering tests to establish compliance with the minimum static...

40 CFR 141.133 - Compliance requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... specified by § 141.135(c). Systems may begin monitoring to determine whether Step 1 TOC removals can be met... the Step 1 requirements in § 141.135(b)(2) and must therefore apply for alternate minimum TOC removal (Step 2) requirements, is not eligible for retroactive approval of alternate minimum TOC removal (Step 2...

Do Formal Inspections Ensure that British Zoos Meet and Improve on Minimum Animal Welfare Standards?

PubMed Central

Draper, Chris; Browne, William; Harris, Stephen

2013-01-01

Simple Summary Key aims of the formal inspections of British zoos are to assess compliance with minimum standards of animal welfare and promote improvements in animal care and husbandry. We compared reports from two consecutive inspections of 136 British zoos to see whether these goals were being achieved. Most zoos did not meet all the minimum animal welfare standards and there was no clear evidence of improving levels of compliance with standards associated with the Zoo Licensing Act 1981. The current system of licensing and inspection does not ensure that British zoos meet and maintain, let alone exceed, the minimum animal welfare standards. Abstract We analysed two consecutive inspection reports for each of 136 British zoos made by government-appointed inspectors between 2005 and 2011 to assess how well British zoos were complying with minimum animal welfare standards; median interval between inspections was 1,107 days. There was no conclusive evidence for overall improvements in the levels of compliance by British zoos. Having the same zoo inspector at both inspections affected the outcome of an inspection; animal welfare criteria were more likely to be assessed as unchanged if the same inspector was present on both inspections. This, and erratic decisions as to whether a criterion applied to a particular zoo, suggest inconsistency in assessments between inspectors. Zoos that were members of a professional association (BIAZA) did not differ significantly from non-members in the overall number of criteria assessed as substandard at the second inspection but were more likely to meet the standards on both inspections and less likely to have criteria remaining substandard. Lack of consistency between inspectors, and the high proportion of zoos failing to meet minimum animal welfare standards nearly thirty years after the Zoo Licensing Act came into force, suggest that the current system of licensing and inspection is not meeting key objectives and requires revision. PMID:26479752

The effect of verbal interpretive message on day user impacts at Mount Rainer National Park

Treesearch

Anne Kernan; Ellen Drogin

1995-01-01

The behaviors of 434 hikers visiting the heavily used Bench Lake/Snow Lake Trail at Mount Rainier National Park were observed to assess the effect of a verbal interpretive message on compliance with minimum impact hiking recommendations. Significant relationships were found between compliance and message exposure, and a variety of situational and demographic variables...

7 CFR 1773.32 - Report on compliance and on internal control over financial reporting.

Code of Federal Regulations, 2011 CFR

2011-01-01

... reporting. As required by GAGAS, the CPA must prepare a written report describing the auditors testing of... reporting and present the results of those tests. This report must be signed by the CPA and must include, as a minimum: (a) The scope of the CPA's testing of compliance with laws and regulations and internal...

7 CFR 1773.32 - Report on compliance and on internal control over financial reporting.

Code of Federal Regulations, 2014 CFR

2014-01-01

... reporting. As required by GAGAS, the CPA must prepare a written report describing the auditors testing of... reporting and present the results of those tests. This report must be signed by the CPA and must include, as a minimum: (a) The scope of the CPA's testing of compliance with laws and regulations and internal...

7 CFR 1773.32 - Report on compliance and on internal control over financial reporting.

Code of Federal Regulations, 2013 CFR

2013-01-01

... reporting. As required by GAGAS, the CPA must prepare a written report describing the auditors testing of... reporting and present the results of those tests. This report must be signed by the CPA and must include, as a minimum: (a) The scope of the CPA's testing of compliance with laws and regulations and internal...

7 CFR 1773.32 - Report on compliance and on internal control over financial reporting.

Code of Federal Regulations, 2012 CFR

2012-01-01

... reporting. As required by GAGAS, the CPA must prepare a written report describing the auditors testing of... reporting and present the results of those tests. This report must be signed by the CPA and must include, as a minimum: (a) The scope of the CPA's testing of compliance with laws and regulations and internal...

40 CFR 62.14452 - What test methods and procedures must I use?

Code of Federal Regulations, 2014 CFR

2014-07-01

... flow rate and minimum scrubber liquor pH to demonstrate compliance with the HCl emissions limit. (6... Method 6 or 6C of 40 CFR part 60, appendix A-4 to measure SO2 emissions; (h) You must use EPA Reference... specified in paragraph (p) of this section, as an alternative to demonstrate compliance with the dioxin...

40 CFR 62.14452 - What test methods and procedures must I use?

Code of Federal Regulations, 2013 CFR

2013-07-01

... flow rate and minimum scrubber liquor pH to demonstrate compliance with the HCl emissions limit. (6... Method 6 or 6C of 40 CFR part 60, appendix A-4 to measure SO2 emissions; (h) You must use EPA Reference... specified in paragraph (p) of this section, as an alternative to demonstrate compliance with the dioxin...

Using the OIG model compliance programs to fight fraud.

PubMed

Lovitky, Jeffrey A; Ahern, Jack

2002-03-01

Many healthcare organizations already have implemented compliance programs for their facilities. However, in light of recent fines and continued scrutiny of such programs by the HHS Office of Inspector General (OIG), healthcare organizations should consider reviewing their current programs against the OIG's relevant model compliance program. Although healthcare organizations are not required to adhere strictly to OIG's model programs, they would benefit from ensuring that their programs meet all the OIG's requirements. The common, minimum elements suggested by the OIG model programs include development and distribution of written compliance policies, the designation of a chief compliance officer to manage the program, the development of a corrective action and enforcement system, and the use of audits to monitor compliance. Using these models as guides, healthcare organizations should be better able to avoid the possibility of fraud and abuse within their organizations.

Compliance with WHO IYCF Indicators and Dietary Intake Adequacy in a Sample of Malaysian Infants Aged 6–23 Months

PubMed Central

Khor, Geok Lin; Tan, Sue Yee; Tan, Kok Leong; Chan, Pauline S.; Amarra, Maria Sofia V.

2016-01-01

Background: The 2010 World Health Organisation (WHO) Infant and Young Child Feeding (IYCF) indicators are useful for monitoring feeding practices. Methods: A total sample of 300 subjects aged 6 to 23 months was recruited from urban suburbs of Kuala Lumpur and Putrajaya. Compliance with each IYCF indicator was computed according to WHO recommendations. Dietary intake based on two-day weighed food records was obtained from a sub-group (N = 119) of the total sample. The mean adequacy ratio (MAR) value was computed as an overall measure of dietary intake adequacy. Contributions of core IYCF indicators to MAR were determined by multinomial logistic regression. Results: Generally, the subjects showed high compliance for (i) timely introduction of complementary foods at 6 to 8 months (97.9%); (ii) minimum meal frequency among non-breastfed children aged 6 to 23 months (95.2%); (iii) consumption of iron-rich foods at 6 to 23 months (92.3%); and minimum dietary diversity (78.0%). While relatively high proportions achieved the recommended intake levels for protein (87.4%) and iron (71.4%), lower proportions attained the recommendations for calcium (56.3%) and energy (56.3%). The intake of micronutrients was generally poor. The minimum dietary diversity had the greatest contribution to MAR (95% CI: 3.09, 39.87) (p = 0.000) among the core IYCF indicators. Conclusion: Malaysian urban infants and toddlers showed moderate to high compliance with WHO IYCF indicators. The robustness of the analytical approach in this study in quantifying contributions of IYCF indicators to MAR should be further investigated. PMID:27916932

Compliance with WHO IYCF Indicators and Dietary Intake Adequacy in a Sample of Malaysian Infants Aged 6-23 Months.

PubMed

Khor, Geok Lin; Tan, Sue Yee; Tan, Kok Leong; Chan, Pauline S; Amarra, Maria Sofia V

2016-12-01

The 2010 World Health Organisation (WHO) Infant and Young Child Feeding (IYCF) indicators are useful for monitoring feeding practices. A total sample of 300 subjects aged 6 to 23 months was recruited from urban suburbs of Kuala Lumpur and Putrajaya. Compliance with each IYCF indicator was computed according to WHO recommendations. Dietary intake based on two-day weighed food records was obtained from a sub-group ( N = 119) of the total sample. The mean adequacy ratio (MAR) value was computed as an overall measure of dietary intake adequacy. Contributions of core IYCF indicators to MAR were determined by multinomial logistic regression. Generally, the subjects showed high compliance for (i) timely introduction of complementary foods at 6 to 8 months (97.9%); (ii) minimum meal frequency among non-breastfed children aged 6 to 23 months (95.2%); (iii) consumption of iron-rich foods at 6 to 23 months (92.3%); and minimum dietary diversity (78.0%). While relatively high proportions achieved the recommended intake levels for protein (87.4%) and iron (71.4%), lower proportions attained the recommendations for calcium (56.3%) and energy (56.3%). The intake of micronutrients was generally poor. The minimum dietary diversity had the greatest contribution to MAR (95% CI: 3.09, 39.87) ( p = 0.000) among the core IYCF indicators. Malaysian urban infants and toddlers showed moderate to high compliance with WHO IYCF indicators. The robustness of the analytical approach in this study in quantifying contributions of IYCF indicators to MAR should be further investigated.

40 CFR Table 1 to Subpart III of... - Emission Limitations

Code of Federal Regulations, 2011 CFR

2011-07-01

... determining compliance using this method Cadmium 0.004 milligrams per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Performance test (Method 29 of appendix A of part 60). Carbon monoxide 157 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance...

40 CFR Table 1 to Subpart III of... - Emission Limitations

Code of Federal Regulations, 2010 CFR

2010-07-01

... determining compliance using this method Cadmium 0.004 milligrams per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Performance test (Method 29 of appendix A of part 60). Carbon monoxide 157 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance...

A three-dimensional topology optimization model for tooth-root morphology.

PubMed

Seitz, K-F; Grabe, J; Köhne, T

2018-02-01

To obtain the root of a lower incisor through structural optimization, we used two methods: optimization with Solid Isotropic Material with Penalization (SIMP) and Soft-Kill Option (SKO). The optimization was carried out in combination with a finite element analysis in Abaqus/Standard. The model geometry was based on cone-beam tomography scans of 10 adult males with healthy bone-tooth interface. Our results demonstrate that the optimization method using SIMP for minimum compliance could not adequately predict the actual root shape. The SKO method, however, provided optimization results that were comparable to the natural root form and is therefore suitable to set up the basic topology of a dental root.

30 CFR 778.14 - Providing violation information.

Code of Federal Regulations, 2010 CFR

2010-07-01

... INTERIOR SURFACE COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY PROGRAMS PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR LEGAL, FINANCIAL, COMPLIANCE, AND RELATED...

30 CFR 778.18 - Insurance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY PROGRAMS PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR LEGAL, FINANCIAL, COMPLIANCE, AND RELATED INFORMATION § 778.18 Insurance...

30 CFR 778.12 - Providing permit history information.

Code of Federal Regulations, 2010 CFR

2010-07-01

... INTERIOR SURFACE COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY PROGRAMS PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR LEGAL, FINANCIAL, COMPLIANCE, AND RELATED...

30 CFR 778.17 - Permit term.

Code of Federal Regulations, 2010 CFR

2010-07-01

... MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY PROGRAMS PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR LEGAL, FINANCIAL, COMPLIANCE, AND RELATED INFORMATION § 778.17 Permit...

30 CFR 778.21 - Proof of publication.

Code of Federal Regulations, 2010 CFR

2010-07-01

... COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY PROGRAMS PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR LEGAL, FINANCIAL, COMPLIANCE, AND RELATED INFORMATION § 778...

49 CFR 212.107 - Certification.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DEPARTMENT OF TRANSPORTATION STATE SAFETY PARTICIPATION REGULATIONS State/Federal Roles § 212.107... State agency will, at a minimum, conduct planned compliance inspections meeting the level of effort...

40 CFR 60.3041 - What is the minimum amount of monitoring data I must collect with my continuous emission...

Code of Federal Regulations, 2014 CFR

2014-07-01

... and Compliance Times for Other Solid Waste Incineration Units That Commenced Construction On or Before.... An operating day is any day the unit combusts any municipal or institutional solid waste. (d) If you... malfunction or when repairs, calibration checks, or zero and span checks keep you from collecting the minimum...

40 CFR 60.3041 - What is the minimum amount of monitoring data I must collect with my continuous emission...

Code of Federal Regulations, 2012 CFR

2012-07-01

... and Compliance Times for Other Solid Waste Incineration Units That Commenced Construction On or Before.... An operating day is any day the unit combusts any municipal or institutional solid waste. (d) If you... malfunction or when repairs, calibration checks, or zero and span checks keep you from collecting the minimum...

40 CFR 60.3041 - What is the minimum amount of monitoring data I must collect with my continuous emission...

Code of Federal Regulations, 2013 CFR

2013-07-01

... and Compliance Times for Other Solid Waste Incineration Units That Commenced Construction On or Before.... An operating day is any day the unit combusts any municipal or institutional solid waste. (d) If you... malfunction or when repairs, calibration checks, or zero and span checks keep you from collecting the minimum...

Development of a hydraulic model of the human systemic circulation

NASA Technical Reports Server (NTRS)

Sharp, M. K.; Dharmalingham, R. K.

1999-01-01

Physical and numeric models of the human circulation are constructed for a number of objectives, including studies and training in physiologic control, interpretation of clinical observations, and testing of prosthetic cardiovascular devices. For many of these purposes it is important to quantitatively validate the dynamic response of the models in terms of the input impedance (Z = oscillatory pressure/oscillatory flow). To address this need, the authors developed an improved physical model. Using a computer study, the authors first identified the configuration of lumped parameter elements in a model of the systemic circulation; the result was a good match with human aortic input impedance with a minimum number of elements. Design, construction, and testing of a hydraulic model analogous to the computer model followed. Numeric results showed that a three element model with two resistors and one compliance produced reasonable matching without undue complication. The subsequent analogous hydraulic model included adjustable resistors incorporating a sliding plate to vary the flow area through a porous material and an adjustable compliance consisting of a variable-volume air chamber. The response of the hydraulic model compared favorably with other circulation models.

12 CFR 615.5336 - Compliance and reporting.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) The conditions or circumstances leading to the institution's falling below minimum levels, the... expected to generate additional earnings; (vi) The effect of the business changes required to increase...

30 CFR 778.22 - Facilities or structures used in common.

Code of Federal Regulations, 2010 CFR

2010-07-01

... INTERIOR SURFACE COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY PROGRAMS PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR LEGAL, FINANCIAL, COMPLIANCE, AND RELATED...

The effective compliance of spatially evolving planar wing-cracks

NASA Astrophysics Data System (ADS)

Ayyagari, R. S.; Daphalapurkar, N. P.; Ramesh, K. T.

2018-02-01

We present an analytic closed form solution for anisotropic change in compliance due to the spatial evolution of planar wing-cracks in a material subjected to largely compressive loading. A fully three-dimensional anisotropic compliance tensor is defined and evaluated considering the wing-crack mechanism, using a mixed-approach based on kinematic and energetic arguments to derive the coefficients in incremental compliance. Material, kinematic and kinetic parametric influences on the increments in compliance are studied in order to understand their physical implications on material failure. Model verification is carried out through comparisons to experimental uniaxial compression results to showcase the predictive capabilities of the current study.

Compliance with minimum information guidelines in public metabolomics repositories

PubMed Central

Spicer, Rachel A.; Salek, Reza; Steinbeck, Christoph

2017-01-01

The Metabolomics Standards Initiative (MSI) guidelines were first published in 2007. These guidelines provided reporting standards for all stages of metabolomics analysis: experimental design, biological context, chemical analysis and data processing. Since 2012, a series of public metabolomics databases and repositories, which accept the deposition of metabolomic datasets, have arisen. In this study, the compliance of 399 public data sets, from four major metabolomics data repositories, to the biological context MSI reporting standards was evaluated. None of the reporting standards were complied with in every publicly available study, although adherence rates varied greatly, from 0 to 97%. The plant minimum reporting standards were the most complied with and the microbial and in vitro were the least. Our results indicate the need for reassessment and revision of the existing MSI reporting standards. PMID:28949328

Compliance with minimum information guidelines in public metabolomics repositories.

PubMed

Spicer, Rachel A; Salek, Reza; Steinbeck, Christoph

2017-09-26

The Metabolomics Standards Initiative (MSI) guidelines were first published in 2007. These guidelines provided reporting standards for all stages of metabolomics analysis: experimental design, biological context, chemical analysis and data processing. Since 2012, a series of public metabolomics databases and repositories, which accept the deposition of metabolomic datasets, have arisen. In this study, the compliance of 399 public data sets, from four major metabolomics data repositories, to the biological context MSI reporting standards was evaluated. None of the reporting standards were complied with in every publicly available study, although adherence rates varied greatly, from 0 to 97%. The plant minimum reporting standards were the most complied with and the microbial and in vitro were the least. Our results indicate the need for reassessment and revision of the existing MSI reporting standards.

Modeling for Ultrasonic Health Monitoring of Foams with Embedded Sensors

NASA Technical Reports Server (NTRS)

Wang, L.; Rokhlin, S. I.; Rokhlin, Stanislav, I.

2005-01-01

In this report analytical and numerical methods are proposed to estimate the effective elastic properties of regular and random open-cell foams. The methods are based on the principle of minimum energy and on structural beam models. The analytical solutions are obtained using symbolic processing software. The microstructure of the random foam is simulated using Voronoi tessellation together with a rate-dependent random close-packing algorithm. The statistics of the geometrical properties of random foams corresponding to different packing fractions have been studied. The effects of the packing fraction on elastic properties of the foams have been investigated by decomposing the compliance into bending and axial compliance components. It is shown that the bending compliance increases and the axial compliance decreases when the packing fraction increases. Keywords: Foam; Elastic properties; Finite element; Randomness

Protecting Labor Rights: Roles for Public Health

PubMed Central

Gaydos, Megan; Yu, Karen; Weintraub, June

2013-01-01

Federal, state, and local labor laws establish minimum standards for working conditions, including wages, work hours, occupational safety, and collective bargaining. The adoption and enforcement of labor laws protect and promote social, economic, and physical determinants of health, while incomplete compliance undermines these laws and contributes to health inequalities. Using existing legal authorities, some public health agencies may be able to contribute to the adoption, monitoring, and enforcement of labor laws. We describe how routine public health functions have been adapted in San Francisco, California, to support compliance with minimum wage and workers' compensation insurance standards. Based on these experiences, we consider the opportunities and obstacles for health agencies to defend and advance labor standards. Increasing coordinated action between health and labor agencies may be a promising approach to reducing health inequities and efficiently enforcing labor standards. PMID:24179278

Protecting labor rights: roles for public health.

PubMed

Bhatia, Rajiv; Gaydos, Megan; Yu, Karen; Weintraub, June

2013-11-01

Federal, state, and local labor laws establish minimum standards for working conditions, including wages, work hours, occupational safety, and collective bargaining. The adoption and enforcement of labor laws protect and promote social, economic, and physical determinants of health, while incomplete compliance undermines these laws and contributes to health inequalities. Using existing legal authorities, some public health agencies may be able to contribute to the adoption, monitoring, and enforcement of labor laws. We describe how routine public health functions have been adapted in San Francisco, California, to support compliance with minimum wage and workers' compensation insurance standards. Based on these experiences, we consider the opportunities and obstacles for health agencies to defend and advance labor standards. Increasing coordinated action between health and labor agencies may be a promising approach to reducing health inequities and efficiently enforcing labor standards.

40 CFR 51.370 - Compliance with recall notices.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Administrator. The State shall update its list of unresolved recalls on a quarterly basis at a minimum. (2) The... database, the quality control methods used to insure that recall repairs are properly documented and...

40 CFR 51.370 - Compliance with recall notices.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Administrator. The State shall update its list of unresolved recalls on a quarterly basis at a minimum. (2) The... database, the quality control methods used to insure that recall repairs are properly documented and...

40 CFR 51.370 - Compliance with recall notices.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Administrator. The State shall update its list of unresolved recalls on a quarterly basis at a minimum. (2) The... database, the quality control methods used to insure that recall repairs are properly documented and...

40 CFR 51.370 - Compliance with recall notices.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Administrator. The State shall update its list of unresolved recalls on a quarterly basis at a minimum. (2) The... database, the quality control methods used to insure that recall repairs are properly documented and...

40 CFR 51.370 - Compliance with recall notices.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Administrator. The State shall update its list of unresolved recalls on a quarterly basis at a minimum. (2) The... database, the quality control methods used to insure that recall repairs are properly documented and...

40 CFR Table 9 to Subpart Wwww of... - Initial Compliance With Work Practice Standards

Code of Federal Regulations, 2010 CFR

2010-07-01

... have demonstrated initial compliance if . . . 1. a new or existing closed molding operation using... adding materials, and materials are recovered after slitting. 2. a new or existing cleaning operation not...-containing materials storage operation keep containers that store HAP-containing materials closed or covered...

76 FR 5215 - Draft Regulatory Guide: Issuance, Availability

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-28

... Compliance with Packaging Requirements for Shipment and Receipt of Radioactive Material,'' is temporarily... Code of Federal Regulations, Part 71, ``Packaging and Transportation of Radioactive Material'' (10 CFR... Compliance with Packaging Requirements for Shipments of Radioactive Materials,'' as an acceptable process for...

40 CFR 63.7938 - How do I demonstrate continuous compliance with the general standards?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Remediation General Compliance Requirements § 63.7938 How do I demonstrate continuous compliance with the....7893. (2) If the remediation material treated or managed by the process vented through the affected... required in § 63.7885(c)(2) to show that the total VOHAP concentration of the remediation material remains...

Compliance Study of Endovascular Stent Grafts Incorporated with Polyester and Polyurethane Graft Materials in both Stented and Unstented Zones

PubMed Central

Guan, Ying; Wang, Lu; Lin, Jing; King, Martin W.

2016-01-01

Compliance mismatch between stent graft and host artery may induce complications and blood flow disorders. However, few studies have been reported on stent graft compliance. This study aims to explore the deformation and compliance of stent graft in stented and unstented zones under three pressure ranges. Compliance of two stent grafts incorporated with polyurethane graft (nitinol-PU) and polyester graft (nitinol-PET) materials respectively were tested; the stents used in the two stent grafts were identical. For the circumferential deformation of the stent grafts under each pressure range, the nitinol-PET stent graft was uniform in both zones. The nitinol-PU stent graft was circumferentially uniform in the stented zone, however, it was nonuniform in the unstented zone. The compliance of the PU graft material was 15 times higher than that of the PET graft. No significant difference in compliance was observed between stented and unstented zones of the nitinol-PET stent graft regardless of the applied pressure range. However, for the nitinol-PU stent graft, compliance of the unstented PU region was approximately twice that of the stented region; thus, compliance along the length of the nitinol-PU stent graft was not constant and different from that of the nitinol-PET stent graft. PMID:28773781

Development and validation of an educational booklet for healthy eating during pregnancy1

PubMed Central

de Oliveira, Sheyla Costa; Lopes, Marcos Venícios de Oliveira; Fernandes, Ana Fátima Carvalho

2014-01-01

OBJECTIVE: to describe the validation process of an educational booklet for healthy eating in pregnancy using local and regional food. METHODS: methodological study, developed in three steps: construction of the educational booklet, validation of the educational material by judges, and by pregnant women. The validation process was conducted by 22 judges and 20 pregnant women, by convenience selection. We considered a p-value<0.85 to validate the booklet compliance and relevance, according to the six items of the instrument. As for content validation, the item-level Content Validity Index (I-CVI) was considered when a minimum score of at least 0.80 was obtained. RESULTS: five items were considered relevant by the judges. The mean I-CVI was 0.91. The pregnant women evaluated positively the booklet. The suggestions were accepted and included in the final version of the material. CONCLUSION: the booklet was validated in terms of content and relevance, and should be used by nurses for advice on healthy eating during pregnancy. PMID:25296145

49 CFR 229.205 - General requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Crashworthiness Design... the minimum crashworthiness performance requirements set forth in Appendix E of this part. Compliance with those performance criteria must be established by: (1) Meeting an FRA-approved crashworthiness...

49 CFR 229.205 - General requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Crashworthiness Design... the minimum crashworthiness performance requirements set forth in Appendix E of this part. Compliance with those performance criteria must be established by: (1) Meeting an FRA-approved crashworthiness...

49 CFR 229.205 - General requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Crashworthiness Design... the minimum crashworthiness performance requirements set forth in Appendix E of this part. Compliance with those performance criteria must be established by: (1) Meeting an FRA-approved crashworthiness...

49 CFR 229.205 - General requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Crashworthiness Design... the minimum crashworthiness performance requirements set forth in Appendix E of this part. Compliance with those performance criteria must be established by: (1) Meeting an FRA-approved crashworthiness...

49 CFR 229.205 - General requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Locomotive Crashworthiness Design... the minimum crashworthiness performance requirements set forth in Appendix E of this part. Compliance with those performance criteria must be established by: (1) Meeting an FRA-approved crashworthiness...

Higher Education and Regulation: Counting the Costs of Compliance

ERIC Educational Resources Information Center

Walsh, John

1975-01-01

Describes the financial crises in colleges and universities caused by the enactment of federal social legislation, such as equal employment opportunity provisions, the Equal Pay Act, minimum wage law, unemployment insurance, and affirmative action programs. (MLH)

40 CFR Table 2a to Subpart Ce of... - Emissions Limits for Small HMIWI Which Meet the Criteria Under § 60.33e(b)(1)

Code of Federal Regulations, 2011 CFR

2011-07-01

... time 1 Method for demonstrating compliance 2 Particulate matter mg/dscm (gr/dscf) 197 (0.086) 3-run average (1-hour minimum sample time per run) EPA Reference Method 5 of appendix A-3 of part 60, or EPA Reference Method 26A or 29 of appendix A-8 of part 60. Carbon monoxide ppmv 40 3-run average (1-hour minimum...

40 CFR Table 2b to Subpart Ce of... - Emissions Limits for Small HMIWI Which Meet the Criteria Under § 60.33e(b)(2)

Code of Federal Regulations, 2011 CFR

2011-07-01

... time 1 Method for demonstrating compliance 2 Particulate matter mg/dscm (gr/dscf) 87 (0.038) 3-run average (1-hour minimum sample time per run) EPA Reference Method 5 of appendix A-3 of part 60, or EPA Reference Method 26A or 29 of appendix A-8 of part 60. Carbon monoxide ppmv 20 3-run average (1-hour minimum...

30 CFR 778.16 - Status of unsuitability claims.

Code of Federal Regulations, 2010 CFR

2010-07-01

... INTERIOR SURFACE COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY PROGRAMS PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR LEGAL, FINANCIAL, COMPLIANCE, AND RELATED... assertion that the applicant made substantial legal and financial commitments before January 4, 1977...

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The purpose of this document is to provide the technical requirements for operation, inspection and maintenance of a TRUPACT-II Shipping Package and directly related components. This document shall supply the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP) and Certificate of Compliance (C of C) 9218. In the event there is a conflict between this document and the TRUPACT-II SARP (NRC Certificate of Compliance No. 9218), the TRUPACT-II SARP shall govern. This document details the operations, maintenance, repair, replacement of components, as well as the documentation required and the procedures to be followed to maintainmore » the integrity of the TRUPACT-II container. These procedures may be modified for site use, but as a minimum all parameters and format listed herein must be included in any site modified version. For convenience and where applicable steps may be performed out of sequence. Packaging and payload handling equipment and transport trailers have been specifically designed for use with the TRUPACT-II Packaging. This document discusses the minimum required procedures for use of the adjustable center of gravity lift fixture and the TRUPACT-II transport trailer in conjunction with the TRUPACT-II Packaging.« less

49 CFR 384.217 - Drug offenses.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false Drug offenses. 384.217 Section 384.217 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY... COMMERCIAL DRIVER'S LICENSE PROGRAM Minimum Standards for Substantial Compliance by States § 384.217 Drug...

49 CFR 384.217 - Drug offenses.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Drug offenses. 384.217 Section 384.217 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY... COMMERCIAL DRIVER'S LICENSE PROGRAM Minimum Standards for Substantial Compliance by States § 384.217 Drug...

49 CFR 384.217 - Drug offenses.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 5 2013-10-01 2013-10-01 false Drug offenses. 384.217 Section 384.217 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY... COMMERCIAL DRIVER'S LICENSE PROGRAM Minimum Standards for Substantial Compliance by States § 384.217 Drug...

49 CFR 384.217 - Drug offenses.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 5 2012-10-01 2012-10-01 false Drug offenses. 384.217 Section 384.217 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY... COMMERCIAL DRIVER'S LICENSE PROGRAM Minimum Standards for Substantial Compliance by States § 384.217 Drug...

49 CFR 384.217 - Drug offenses.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 5 2014-10-01 2014-10-01 false Drug offenses. 384.217 Section 384.217 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY... COMMERCIAL DRIVER'S LICENSE PROGRAM Minimum Standards for Substantial Compliance by States § 384.217 Drug...

30 CFR 778.8 - Information collection.

Code of Federal Regulations, 2010 CFR

2010-07-01

... COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY PROGRAMS PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR LEGAL, FINANCIAL, COMPLIANCE, AND RELATED INFORMATION § 778...-0117. The information collected will be used by the regulatory authority to ensure that all legal...

Djeen (Database for Joomla!'s Extensible Engine): a research information management system for flexible multi-technology project administration.

PubMed

Stahl, Olivier; Duvergey, Hugo; Guille, Arnaud; Blondin, Fanny; Vecchio, Alexandre Del; Finetti, Pascal; Granjeaud, Samuel; Vigy, Oana; Bidaut, Ghislain

2013-06-06

With the advance of post-genomic technologies, the need for tools to manage large scale data in biology becomes more pressing. This involves annotating and storing data securely, as well as granting permissions flexibly with several technologies (all array types, flow cytometry, proteomics) for collaborative work and data sharing. This task is not easily achieved with most systems available today. We developed Djeen (Database for Joomla!'s Extensible Engine), a new Research Information Management System (RIMS) for collaborative projects. Djeen is a user-friendly application, designed to streamline data storage and annotation collaboratively. Its database model, kept simple, is compliant with most technologies and allows storing and managing of heterogeneous data with the same system. Advanced permissions are managed through different roles. Templates allow Minimum Information (MI) compliance. Djeen allows managing project associated with heterogeneous data types while enforcing annotation integrity and minimum information. Projects are managed within a hierarchy and user permissions are finely-grained for each project, user and group.Djeen Component source code (version 1.5.1) and installation documentation are available under CeCILL license from http://sourceforge.net/projects/djeen/files and supplementary material.

Djeen (Database for Joomla!’s Extensible Engine): a research information management system for flexible multi-technology project administration

PubMed Central

2013-01-01

Background With the advance of post-genomic technologies, the need for tools to manage large scale data in biology becomes more pressing. This involves annotating and storing data securely, as well as granting permissions flexibly with several technologies (all array types, flow cytometry, proteomics) for collaborative work and data sharing. This task is not easily achieved with most systems available today. Findings We developed Djeen (Database for Joomla!’s Extensible Engine), a new Research Information Management System (RIMS) for collaborative projects. Djeen is a user-friendly application, designed to streamline data storage and annotation collaboratively. Its database model, kept simple, is compliant with most technologies and allows storing and managing of heterogeneous data with the same system. Advanced permissions are managed through different roles. Templates allow Minimum Information (MI) compliance. Conclusion Djeen allows managing project associated with heterogeneous data types while enforcing annotation integrity and minimum information. Projects are managed within a hierarchy and user permissions are finely-grained for each project, user and group. Djeen Component source code (version 1.5.1) and installation documentation are available under CeCILL license from http://sourceforge.net/projects/djeen/files and supplementary material. PMID:23742665

40 CFR Table 5 to Subpart Uuuu of... - Continuous Compliance With Emission Limits and Work Practice Standards

Code of Federal Regulations, 2011 CFR

2011-07-01

... material balance that includes the pertinent data used to determine the percent reduction of total sulfide... material balance; and (3) complying with the continuous compliance requirements for closed-vent systems. 2... material balance that includes the pertinent data used to determine the percent reduction of toluene...

40 CFR Table 5 to Subpart Uuuu of... - Continuous Compliance With Emission Limits and Work Practice Standards

Code of Federal Regulations, 2010 CFR

2010-07-01

... material balance that includes the pertinent data used to determine the percent reduction of total sulfide... material balance; and (3) complying with the continuous compliance requirements for closed-vent systems. 2... material balance that includes the pertinent data used to determine the percent reduction of toluene...

77 FR 76979 - Pesticides; Revisions to Minimum Risk Exemption

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-31

...EPA is proposing to more clearly describe the active and inert ingredients permitted in products eligible for the exemption from regulation for minimum risk pesticides. EPA is proposing to reorganize these lists with a focus on clarity and transparency by adding specific chemical identifiers. The identifiers would make it clearer to manufacturers; the public; and Federal, state, and tribal inspectors which ingredients are permitted in minimum risk pesticide products. EPA is also proposing to modify the label requirements in the exemption to require the use of specific common chemical names in lists of ingredients on minimum risk pesticide product labels, and to require producer contact information on the label. Once final, these proposed changes would maintain the availability of minimum risk pesticide products while providing more consistent information for consumers, clearer regulations for producers, and easier identification by states, tribes and EPA as to whether a product is in compliance with the exemption.

The elderly on dialysis: some considerations in compliance.

PubMed

McKevitt, P M; Jones, J F; Lane, D A; Marion, R R

1990-10-01

Compliance with scheduled treatments, dietary and fluid restrictions, and multiple medications is an important component in the care and well-being of end-stage renal disease (ESRD) patients. Given the rigorus and complex demands of dialysis, it is important to examine the issue of compliance, focusing on a large and ever-increasing segment of our patient population, the elderly. The ESRD literature reflects efforts to define and measure levels of compliance, identify factors that influence and predict compliance, and develop intervention strategies to improve adherence to treatment regimens. While limited attention has been focused specifically on the elderly, there are studies suggesting that age may be a factor associated with improved adherence and that social support may be a significant contributor to compliance in this patient group. In an effort to examine the current status and needs of the dialysis elderly, research is in progress at Chromalloy American Kidney Center, Washington University, which replicates a study of 5 years ago. Eighty-four patients age 60 and over, on dialysis for a minimum of 6 months, were identified. Sociodemographic, treatment, compliance, and functional capacity data were collected; additional mental and psychological testing was completed on patients willing and able to participate. Preliminary data suggest the current elderly population is larger and significantly older than that of 5 years ago. Other sociodemographic data indicate the population is increasingly female, black, and more socioeconomically disadvantaged. In regard to compliance, the vast majority of elderly demonstrate good compliance as measured by serum potassium, fair to good compliance with phosphorus, and fair to poor compliance with fluid restrictions.(ABSTRACT TRUNCATED AT 250 WORDS)

42 CFR 422.503 - General provisions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... oversight and control over the MA organization's policies and personnel to ensure that management actions... management aspects of the organization. (iii) At a minimum, an executive manager whose appointment and... effectiveness of the compliance programs. (C)(1) Each MA organization must establish and implement effective...

42 CFR 422.503 - General provisions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... oversight and control over the MA organization's policies and personnel to ensure that management actions... management aspects of the organization. (iii) At a minimum, an executive manager whose appointment and... effectiveness of the compliance programs. (C)(1) Each MA organization must establish and implement effective...

30 CFR 778.15 - Right-of-entry information.

Code of Federal Regulations, 2010 CFR

2010-07-01

... SURFACE COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY PROGRAMS PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR LEGAL, FINANCIAL, COMPLIANCE, AND RELATED INFORMATION... upon which the applicant bases his legal right to enter and begin surface coal mining and reclamation...

17 CFR 75.20 - Program for compliance; reporting.

Code of Federal Regulations, 2014 CFR

2014-04-01

... two calendar years shall maintain records that include: (1) Documentation of the exclusions or...; reporting. 75.20 Section 75.20 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION... (a) of this section, at a minimum, shall include: (1) Written policies and procedures reasonably...

40 CFR 63.7938 - How do I demonstrate continuous compliance with the general standards?

Code of Federal Regulations, 2014 CFR

2014-07-01

... compliance with the general standards? 63.7938 Section 63.7938 Protection of Environment ENVIRONMENTAL... Remediation General Compliance Requirements § 63.7938 How do I demonstrate continuous compliance with the....7893. (2) If the remediation material treated or managed by the process vented through the affected...

40 CFR 63.7938 - How do I demonstrate continuous compliance with the general standards?

Code of Federal Regulations, 2013 CFR

2013-07-01

... compliance with the general standards? 63.7938 Section 63.7938 Protection of Environment ENVIRONMENTAL... Remediation General Compliance Requirements § 63.7938 How do I demonstrate continuous compliance with the....7893. (2) If the remediation material treated or managed by the process vented through the affected...

40 CFR 63.7938 - How do I demonstrate continuous compliance with the general standards?

Code of Federal Regulations, 2011 CFR

2011-07-01

... compliance with the general standards? 63.7938 Section 63.7938 Protection of Environment ENVIRONMENTAL... Remediation General Compliance Requirements § 63.7938 How do I demonstrate continuous compliance with the....7893. (2) If the remediation material treated or managed by the process vented through the affected...

40 CFR 63.7938 - How do I demonstrate continuous compliance with the general standards?

Code of Federal Regulations, 2012 CFR

2012-07-01

... compliance with the general standards? 63.7938 Section 63.7938 Protection of Environment ENVIRONMENTAL... Remediation General Compliance Requirements § 63.7938 How do I demonstrate continuous compliance with the....7893. (2) If the remediation material treated or managed by the process vented through the affected...

Impacts of proposed RCRA regulations and other related federal environmental regulations on fossil fuel-fired facilities: Final report, Volume 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1987-03-01

Estimation of the costs associated with implementation of the Resource Conservation and Recovery Act (RCRA) regulations for non-hazardous and hazardous material disposal in the utility industry are provided. These costs are based on engineering studies at a number of coal-fired power plants in which the costs for hazardous and non-hazardous disposal are compared to the costs developed for the current practice design for each utility. The relationship of the three costs is displayed. The emphasis of this study is on the determination of incremental costs rather than the absolute costs for each case (current practice, non-hazardous, or hazardous). For themore » purpose of this project, the hazardous design cost was determined for both minimum and maximum compliance.« less

Macroscopic and Microstructural Aspects of the Transformation Behavior in a Polycrystalline NiTi Shape Memory Alloy

NASA Technical Reports Server (NTRS)

Benafan, Othmane; Noebe, Ronald D.; Padula, Santo A., II; Lerch, Bradley A.; Bigelow, Glen S.; Gaydosh, Darrell J.; Garg, Anita; An, Ke; Vaidyanathan, Raj

2013-01-01

The mechanical and microstructural behavior of a polycrystalline Ni(49.9)Ti(50.1) (at.%) shape memory alloy was investigated as a function of temperature around the transformation regime. The bulk macroscopic responses, measured using ex situ tensile deformation and impulse excitation tests, were compared to the microstructural evolution captured using in situ neutron diffraction. The onset stress for inelastic deformation and dynamic Young's modulus were found to decrease with temperature, in the martensite regime, reaching a significant minimum at approximately 80 C followed by an increase in both properties, attributed to the martensite to austenite transformation. The initial decrease in material compliance during heating affected the ease with which martensite reorientation and detwinning could occur, ultimately impacting the stress for inelastic deformation prior to the start of the reverse transformation.

The Combined Influence of Molecular Weight and Temperature on the Aging and Viscoelastic Response of a Glassy Thermoplastic Polyimide

NASA Technical Reports Server (NTRS)

Nicholson, Lee M.; Whitley, Karen S.; Gates, Thomas S.

2000-01-01

The effect of molecular weight on the viscoelastic performance of an advanced polymer (LaRC-SI) was investigated through the use of creep compliance tests. Testing consisted of short-term isothermal creep and recovery with the creep segments performed under constant load. The tests were conducted at three temperatures below the glass transition temperature of five materials of different molecular weight. Through the use of time-aging-time superposition procedures, the material constants, material master curves and aging-related parameters were evaluated at each temperature for a given molecular weight. The time-temperature superposition technique helped to describe the effect of temperature on the timescale of the viscoelastic response of each molecular weight. It was shown that the low molecular weight materials have higher creep compliance and creep rate, and are more sensitive to temperature than the high molecular weight materials. Furthermore, a critical molecular weight transition was observed to occur at a weight-average molecular weight of M (bar) (sub w) 25000 g/mol below which, the temperature sensitivity of the time-temperature superposition shift factor increases rapidly. The short-term creep compliance data were used in association with Struik's effective time theory to predict the long-term creep compliance behavior for the different molecular weights. At long timescales, physical aging serves to significantly decrease the creep compliance and creep rate of all the materials tested.

40 CFR Table 5 to Subpart Uuuu of... - Continuous Compliance With Emission Limits and Work Practice Standards

Code of Federal Regulations, 2013 CFR

2013-07-01

...) maintaining a material balance that includes the pertinent data used to determine the percent reduction of... pertinent data from the material balance; and (3) complying with the continuous compliance requirements for... systems (1) maintaining a material balance that includes the pertinent data used to determine the percent...

40 CFR Table 5 to Subpart Uuuu of... - Continuous Compliance With Emission Limits and Work Practice Standards

Code of Federal Regulations, 2014 CFR

2014-07-01

...) maintaining a material balance that includes the pertinent data used to determine the percent reduction of... pertinent data from the material balance; and (3) complying with the continuous compliance requirements for... systems (1) maintaining a material balance that includes the pertinent data used to determine the percent...

40 CFR Table 5 to Subpart Uuuu of... - Continuous Compliance With Emission Limits and Work Practice Standards

Code of Federal Regulations, 2012 CFR

2012-07-01

...) maintaining a material balance that includes the pertinent data used to determine the percent reduction of... pertinent data from the material balance; and (3) complying with the continuous compliance requirements for... systems (1) maintaining a material balance that includes the pertinent data used to determine the percent...

Infusing JUST Design in Campus Recreation

ERIC Educational Resources Information Center

Staeger-Wilson, Katheryne; Sampson, Douglas H.

2012-01-01

This practice brief highlights the collaborative work among a disability resource professional, a university architect, and students with disabilities to create a campus recreation center with universal design features. This partnership serves to illustrate that building to minimum compliance standards does not necessarily remove barriers to…

40 CFR 63.1257 - Test methods and compliance procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... the design minimum and average flame zone temperatures and combustion zone residence time; and shall... establish the design exhaust vent stream organic compound concentration level, adsorption cycle time, number... regeneration cycle, design carbon bed temperature after regeneration, design carbon bed regeneration time, and...

40 CFR 63.1257 - Test methods and compliance procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the design minimum and average flame zone temperatures and combustion zone residence time; and shall... establish the design exhaust vent stream organic compound concentration level, adsorption cycle time, number... regeneration cycle, design carbon bed temperature after regeneration, design carbon bed regeneration time, and...

30 CFR 778.8 - Information collection.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Information collection. 778.8 Section 778.8... PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR LEGAL, FINANCIAL, COMPLIANCE, AND RELATED INFORMATION § 778.8 Information collection. The collections of information contained in part 778 have been approved by...

30 CFR 778.8 - Information collection.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Information collection. 778.8 Section 778.8... PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR LEGAL, FINANCIAL, COMPLIANCE, AND RELATED INFORMATION § 778.8 Information collection. The collections of information contained in part 778 have been approved by...

28 CFR 512.17 - Monitoring approved research projects.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 28 Judicial Administration 2 2012-07-01 2012-07-01 false Monitoring approved research projects... MANAGEMENT AND ADMINISTRATION RESEARCH Research § 512.17 Monitoring approved research projects. The BRRB shall monitor all research projects for compliance with Bureau policies. At a minimum, yearly reviews...

28 CFR 512.17 - Monitoring approved research projects.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Monitoring approved research projects... MANAGEMENT AND ADMINISTRATION RESEARCH Research § 512.17 Monitoring approved research projects. The BRRB shall monitor all research projects for compliance with Bureau policies. At a minimum, yearly reviews...

28 CFR 512.17 - Monitoring approved research projects.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 28 Judicial Administration 2 2014-07-01 2014-07-01 false Monitoring approved research projects... MANAGEMENT AND ADMINISTRATION RESEARCH Research § 512.17 Monitoring approved research projects. The BRRB shall monitor all research projects for compliance with Bureau policies. At a minimum, yearly reviews...

77 FR 75946 - Radio Broadcasting Services; Dove Creek, CO

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-26

...]. Radio Broadcasting Services; Dove Creek, CO AGENCY: Federal Communications Commission. ACTION: Proposed... service at Dove Creek, Colorado. Channel 229C3 can be allotted at Dove Creek, Colorado, in compliance with the Commission's minimum distance separation requirements, at the proposed reference coordinates: 37...

30 CFR 778.13 - Providing property interest information.

Code of Federal Regulations, 2010 CFR

2010-07-01

... INTERIOR SURFACE COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY PROGRAMS PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR LEGAL, FINANCIAL, COMPLIANCE, AND RELATED...) Each legal or equitable owner(s) of record of the surface and mineral. (2) The holder(s) of record of...

12 CFR 1008.301 - Scope of this subpart.

Code of Federal Regulations, 2013 CFR

2013-01-01

... COMPLIANCE AND BUREAU REGISTRATION SYSTEM (REGULATION H) Minimum Requirements for Administration of the NMLSR... administration of the NMLSR by the Conference of State Bank Supervisors or by the Bureau. The NMLSR must... state-licensed loan originators. (b) Provide a comprehensive licensing and supervisory database. (c...

12 CFR 1008.301 - Scope of this subpart.

Code of Federal Regulations, 2014 CFR

2014-01-01

... COMPLIANCE AND BUREAU REGISTRATION SYSTEM (REGULATION H) Minimum Requirements for Administration of the NMLSR... administration of the NMLSR by the Conference of State Bank Supervisors or by the Bureau. The NMLSR must... state-licensed loan originators. (b) Provide a comprehensive licensing and supervisory database. (c...

12 CFR 1008.301 - Scope of this subpart.

Code of Federal Regulations, 2012 CFR

2012-01-01

... COMPLIANCE AND BUREAU REGISTRATION SYSTEM (REGULATION H) Minimum Requirements for Administration of the NMLSR... administration of the NMLSR by the Conference of State Bank Supervisors or by the Bureau. The NMLSR must... state-licensed loan originators. (b) Provide a comprehensive licensing and supervisory database. (c...

Compliance with donor age recommendations in oocyte donor recruitment advertisements in the USA.

PubMed

Alberta, Hillary B; Berry, Roberta M; Levine, Aaron D

2013-04-01

IVF using donated oocytes offers benefits to many infertile patients, yet the technique also raises a number of ethical concerns, including worries about potential physical and psychological risks to oocyte donors. In the USA, oversight of oocyte donation consists of a combination of federal and state regulations and self-regulatory guidelines promulgated by the American Society for Reproductive Medicine. This study assesses compliance with one of these self-regulatory guidelines - specifically, ASRM's preferred minimum age for donors of 21. To assess compliance, 539 oocyte donor recruitment advertisements from two recruitment channels (Craigslist and college newspapers) were collected and evaluated. Of these, 61% in the Craigslist dataset and 43% in the college newspaper dataset listed minimum ages between 18 and 20, which is inconsistent with ASRM's preferred minimum age recommendation of 21. Advertisements placed by oocyte donor recruitment agencies were more likely than advertisements placed by clinics to specify minimum ages between 18 and 20. These results indicate that ASRM should evaluate and consider revising its donor age guidelines. IVF using donated human eggs can help many patients who have difficulty having children. However, the technique also raises ethical concerns, including concerns about potential physical and psychological harms to egg donors. In the USA, oversight of egg donation relies on a combination of federal and state regulation and professional self-regulation. Governmental regulations address only limited aspects of egg donation, such as the potential spread of infectious diseases and the reporting of success rates, leaving voluntary guidelines developed by an association of medical professionals to address most issues, including ethical concerns raised by the practice. One of these voluntary guidelines recommends that egg donors should be at least 21 years of age. In this article, we analysed 539 egg donor recruitment advertisements published on Craigslist and in college newspapers to see whether fertility clinics and egg donor recruitment agencies follow this recommendation. We found that 61% of advertisements in the Craigslist dataset and 43% of advertisements in the college newspaper dataset listed minimum ages between 18 and 20 and, thus, did not follow the recommendation that egg donors be at least 21 years of age. Advertisements placed by egg donor recruitment agencies were more likely than advertisements placed by fertility clinics to list minimum ages between 18 and 20. These results indicate that the American Society for Reproductive Medicine should evaluate and consider revising its donor age guidelines. Copyright © 2012 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

40 CFR 63.7937 - How do I demonstrate initial compliance with the general standards?

Code of Federal Regulations, 2014 CFR

2014-07-01

... compliance with the general standards? 63.7937 Section 63.7937 Protection of Environment ENVIRONMENTAL... Remediation General Compliance Requirements § 63.7937 How do I demonstrate initial compliance with the general... remediation material treated or managed by the process vented through the affected process vents has an...

40 CFR 63.7937 - How do I demonstrate initial compliance with the general standards?

Code of Federal Regulations, 2011 CFR

2011-07-01

... compliance with the general standards? 63.7937 Section 63.7937 Protection of Environment ENVIRONMENTAL... Remediation General Compliance Requirements § 63.7937 How do I demonstrate initial compliance with the general... remediation material treated or managed by the process vented through the affected process vents has an...

40 CFR 63.7937 - How do I demonstrate initial compliance with the general standards?

Code of Federal Regulations, 2013 CFR

2013-07-01

... compliance with the general standards? 63.7937 Section 63.7937 Protection of Environment ENVIRONMENTAL... Remediation General Compliance Requirements § 63.7937 How do I demonstrate initial compliance with the general... remediation material treated or managed by the process vented through the affected process vents has an...

75 FR 1099 - Self-Regulatory Organizations; Notice of Filing and Immediate Effectiveness of Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-08

... Laundering Compliance Program) and adopt new Rule 3310--NYSE Amex Equities (Anti-Money Laundering Compliance... amendments, NASD Rule 3011 (Anti- Money Laundering Compliance Program) and related Interpretive Material NASD IM-3011-1 and 3011-2 as consolidated FINRA Rule 3310 (Anti-Money Laundering Compliance Program), and...

Do alcohol compliance checks decrease underage sales at neighboring establishments?

PubMed

Erickson, Darin J; Smolenski, Derek J; Toomey, Traci L; Carlin, Bradley P; Wagenaar, Alexander C

2013-11-01

Underage alcohol compliance checks conducted by law enforcement agencies can reduce the likelihood of illegal alcohol sales at checked alcohol establishments, and theory suggests that an alcohol establishment that is checked may warn nearby establishments that compliance checks are being conducted in the area. In this study, we examined whether the effects of compliance checks diffuse to neighboring establishments. We used data from the Complying with the Minimum Drinking Age trial, which included more than 2,000 compliance checks conducted at more than 900 alcohol establishments. The primary outcome was the sale of alcohol to a pseudo-underage buyer without the need for age identification. A multilevel logistic regression was used to model the effect of a compliance check at each establishment as well as the effect of compliance checks at neighboring establishments within 500 m (stratified into four equal-radius concentric rings), after buyer, license, establishment, and community-level variables were controlled for. We observed a decrease in the likelihood of establishments selling alcohol to underage youth after they had been checked by law enforcement, but these effects quickly decayed over time. Establishments that had a close neighbor (within 125 m) checked in the past 90 days were also less likely to sell alcohol to young-appearing buyers. The spatial effect of compliance checks on other establishments decayed rapidly with increasing distance. Results confirm the hypothesis that the effects of police compliance checks do spill over to neighboring establishments. These findings have implications for the development of an optimal schedule of police compliance checks.

Training and technical assistance for compliance with beverage and physical activity components of New York City's regulations for early child care centers.

PubMed

Kakietek, Jakub; Dunn, Lillian; O'Dell, Sarah Abood; Jernigan, Jan; Kettel Khan, Laura

2014-10-16

In 2006, the New York City Department of Health and Mental Hygiene (DOHMH) passed regulations for child care centers that established standards for beverages provided to children and set a minimum amount of time for daily physical activity. DOHMH offered several types of training and technical assistance to support compliance with the regulations. This article analyzes the association between training and technical assistance provided and compliance with the regulations in a sample of 174 group child care centers. Compliance was measured by using a site inventory of beverages stored on premises and a survey of centers' teachers regarding the amount of physical activity provided. Training and technical assistance measures were based on the DOHMH records of training and technical assistance provided to the centers in the sample and on a survey of center directors. Ordinal logistic regression was used to assess the association between training and technical assistance measures and compliance with the regulations. Measures of training related to physical activity the center received: the number of staff members who participated in Sport, Play and Active Recreation for Kids (SPARK) and other training programs in which a center participated were associated with better compliance with the physical activity regulations. Neither training nor technical assistance were associated with compliance with the regulations related to beverages. Increased compliance with regulations pertaining to physical activity was not related to compliance with beverage regulations. Future trainings should be targeted to the specific regulation requirements to increase compliance.

10 CFR 429.44 - Commercial water heating equipment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... of minimum thermal efficiency or other measure of energy consumption of a basic model for which... 10 Energy 3 2013-01-01 2013-01-01 false Commercial water heating equipment. 429.44 Section 429.44 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION CERTIFICATION, COMPLIANCE, AND ENFORCEMENT FOR CONSUMER...

40 CFR Table 13 to Subpart Xxxx of... - Minimum Data for Continuous Compliance With the Emission Limitations for Puncture Sealant...

Code of Federal Regulations, 2012 CFR

2012-07-01

... regeneration stream mass or volumetric flow for each regeneration cycle for 100 percent of the hours during which the process was operated, and a record of the carbon bed temperature after each regeneration, and...

40 CFR Table 13 to Subpart Xxxx of... - Minimum Data for Continuous Compliance With the Emission Limitations for Puncture Sealant...

Code of Federal Regulations, 2014 CFR

2014-07-01

... regeneration stream mass or volumetric flow for each regeneration cycle for 100 percent of the hours during which the process was operated, and a record of the carbon bed temperature after each regeneration, and...

49 CFR 384.202 - Test standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false Test standards. 384.202 Section 384.202... COMMERCIAL DRIVER'S LICENSE PROGRAM Minimum Standards for Substantial Compliance by States § 384.202 Test... driving skills test for the operation of a CMV in accordance with part 383 of this title. ...

14 CFR 33.89 - Operation test.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., acceleration, overspeeding, ignition, functioning of the propeller (if the engine is designated to operate with a propeller); (2) Compliance with the engine response requirements of § 33.73; and (3) The minimum... STANDARDS: AIRCRAFT ENGINES Block Tests; Turbine Aircraft Engines § 33.89 Operation test. (a) The operation...

14 CFR 33.89 - Operation test.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., acceleration, overspeeding, ignition, functioning of the propeller (if the engine is designated to operate with a propeller); (2) Compliance with the engine response requirements of § 33.73; and (3) The minimum... STANDARDS: AIRCRAFT ENGINES Block Tests; Turbine Aircraft Engines § 33.89 Operation test. (a) The operation...

40 CFR 51.362 - Motorist compliance enforcement program oversight.

Code of Federal Regulations, 2013 CFR

2013-07-01

...., the test fee plus the minimum waiver expenditure). (b) Information management. In establishing an... information management activities. [57 FR 52987, Nov. 5, 1992, as amended at 65 FR 45534, July 24, 2000] ... program shall be audited regularly and shall follow effective program management practices, including...

40 CFR 51.362 - Motorist compliance enforcement program oversight.

Code of Federal Regulations, 2012 CFR

2012-07-01

...., the test fee plus the minimum waiver expenditure). (b) Information management. In establishing an... information management activities. [57 FR 52987, Nov. 5, 1992, as amended at 65 FR 45534, July 24, 2000] ... program shall be audited regularly and shall follow effective program management practices, including...

40 CFR 51.362 - Motorist compliance enforcement program oversight.

Code of Federal Regulations, 2014 CFR

2014-07-01

...., the test fee plus the minimum waiver expenditure). (b) Information management. In establishing an... information management activities. [57 FR 52987, Nov. 5, 1992, as amended at 65 FR 45534, July 24, 2000] ... program shall be audited regularly and shall follow effective program management practices, including...

40 CFR 60.743 - Compliance provisions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 130 Mg per year of VOC), each owner or operator of affected coating mix preparation equipment shall... place. Such activities shall be carried out through ports of the minimum practical size; (ii) Cover... or port for addition of ingredients) shall be covered consistent with paragraphs (c)(1) (i), (ii...

40 CFR 60.743 - Compliance provisions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 130 Mg per year of VOC), each owner or operator of affected coating mix preparation equipment shall... place. Such activities shall be carried out through ports of the minimum practical size; (ii) Cover... or port for addition of ingredients) shall be covered consistent with paragraphs (c)(1) (i), (ii...

Randomized Trial of Pentoxifylline and Vitamin E vs Standard Follow-up After Breast Irradiation to Prevent Breast Fibrosis, Evaluated by Tissue Compliance Meter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacobson, Geraldine, E-mail: geraldine-jacobson@uiowa.edu; Bhatia, Sudershan; Smith, Brian J.

Purpose: To conduct a randomized clinical trial to determine whether the combination of pentoxifylline (PTX) and vitamin E given for 6 months after breast/chest wall irradiation effectively prevents radiation-induced fibrosis (RIF). Methods and Materials: Fifty-three breast cancer patients with localized disease were enrolled and randomized to treatment with oral PTX 400 mg 3 times daily and oral vitamin E 400 IU daily for 6 months after radiation (n=26), or standard follow up (n=27). Tissue compliance meter (TCM) measurements were obtained at 18 months to compare tissue compliance in the irradiated and untreated breast/chest wall in treated subjects and controls. Measurementsmore » were obtained at 2 mirror image sites on each breast/chest wall, and the average difference in tissue compliance was scored. Differences in TCM measurements were compared using a t test. Subjects were followed a minimum of 2 years for local recurrence, disease-free survival, and overall survival. Results: The mean difference in TCM measurements in the 2 groups was 0.88 mm, median of 1.00 mm (treated) and 2.10 mm, median of 2.4 mm (untreated). The difference between the 2 groups was significant (P=.0478). Overall survival (100% treated, 90.6% controls at 5 years) and disease-free survival (96.2% treated, 86.8% controls at 5 years) were not significantly different in the 2 groups. Conclusions: This study of postirradiation breast cancer patients treated with PTX/vitamin E or standard follow-up indicated a significant difference in radiation-induced fibrosis as measured by TCM. There was no observed impact on local control or survival within the first 2 years of follow-up. The treatment was safe and well tolerated. Pentoxifylline/vitamin E may be clinically useful in preventing fibrosis after radiation in high-risk patients.« less

40 CFR 63.707 - Reporting requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

...(c)(1) (material balance calculation) shall include with the notification of compliance status required by § 63.9(h) the results of the initial material balance calculation. (e) The owner or operator... nonregenerative carbon adsorber and demonstrating initial compliance in accordance with § 63.705(c)(6) shall...

40 CFR 63.707 - Reporting requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

...(c)(1) (material balance calculation) shall include with the notification of compliance status required by § 63.9(h) the results of the initial material balance calculation. (e) The owner or operator... nonregenerative carbon adsorber and demonstrating initial compliance in accordance with § 63.705(c)(6) shall...

40 CFR 63.707 - Reporting requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

...(c)(1) (material balance calculation) shall include with the notification of compliance status required by § 63.9(h) the results of the initial material balance calculation. (e) The owner or operator... nonregenerative carbon adsorber and demonstrating initial compliance in accordance with § 63.705(c)(6) shall...

40 CFR 63.707 - Reporting requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

...(c)(1) (material balance calculation) shall include with the notification of compliance status required by § 63.9(h) the results of the initial material balance calculation. (e) The owner or operator... nonregenerative carbon adsorber and demonstrating initial compliance in accordance with § 63.705(c)(6) shall...

40 CFR 63.707 - Reporting requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

...(c)(1) (material balance calculation) shall include with the notification of compliance status required by § 63.9(h) the results of the initial material balance calculation. (e) The owner or operator... nonregenerative carbon adsorber and demonstrating initial compliance in accordance with § 63.705(c)(6) shall...

49 CFR 173.461 - Demonstration of compliance with tests.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 2 2014-10-01 2014-10-01 false Demonstration of compliance with tests. 173.461 Section 173.461 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS...

49 CFR 173.461 - Demonstration of compliance with tests.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false Demonstration of compliance with tests. 173.461 Section 173.461 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS...

Patient-driven education materials: low-literate adults increase understanding of health messages and improve compliance.

PubMed

Townsend, Marilyn S

2011-09-01

Providing educational materials for low-literate patients is an enormous challenge for nursing professionals given that 90 million adults in the health care setting have limited literacy skills. Through the use of a 5-step process, patient educational materials can be created to increase patient understanding of health messages and improve patient compliance. Published by Elsevier Inc.

50 CFR 622.56 - Size limits.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., DEPARTMENT OF COMMERCE FISHERIES OF THE CARIBBEAN, GULF OF MEXICO, AND SOUTH ATLANTIC Shrimp Fishery of the Gulf of Mexico § 622.56 Size limits. Shrimp not in compliance with the applicable size limit as... shrimp harvested in the Gulf EEZ are subject to the minimum-size landing and possession limits of...

50 CFR 622.56 - Size limits.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., DEPARTMENT OF COMMERCE FISHERIES OF THE CARIBBEAN, GULF OF MEXICO, AND SOUTH ATLANTIC Shrimp Fishery of the Gulf of Mexico § 622.56 Size limits. Shrimp not in compliance with the applicable size limit as... shrimp harvested in the Gulf EEZ are subject to the minimum-size landing and possession limits of...

40 CFR 63.11646 - What are my compliance requirements?

Code of Federal Regulations, 2012 CFR

2012-07-01

... with Method 29 must collect a minimum sample volume of 0.85 dry standard cubic meters (30 dry standard... weight measurement device, mass flow meter, or densitometer and volumetric flow meter to measure ore...) Measure the weight of concentrate (produced by electrowinning, Merrill Crowe process, gravity feed, or...

40 CFR 63.11646 - What are my compliance requirements?

Code of Federal Regulations, 2014 CFR

2014-07-01

... with Method 29 must collect a minimum sample volume of 0.85 dry standard cubic meters (30 dry standard... weight measurement device, mass flow meter, or densitometer and volumetric flow meter to measure ore...) Measure the weight of concentrate (produced by electrowinning, Merrill Crowe process, gravity feed, or...

40 CFR 63.11646 - What are my compliance requirements?

Code of Federal Regulations, 2011 CFR

2011-07-01

... with Method 29 must collect a minimum sample volume of 0.85 dry standard cubic meters (30 dry standard... weight measurement device, mass flow meter, or densitometer and volumetric flow meter to measure ore...) Measure the weight of concentrate (produced by electrowinning, Merrill Crowe process, gravity feed, or...

40 CFR 63.11646 - What are my compliance requirements?

Code of Federal Regulations, 2013 CFR

2013-07-01

... with Method 29 must collect a minimum sample volume of 0.85 dry standard cubic meters (30 dry standard... weight measurement device, mass flow meter, or densitometer and volumetric flow meter to measure ore...) Measure the weight of concentrate (produced by electrowinning, Merrill Crowe process, gravity feed, or...

30 CFR 941.780 - Surface mining permit applications-minimum requirements for reclamation and operation plan.

Code of Federal Regulations, 2011 CFR

2011-07-01

... demonstrate compliance with the South Dakota laws on air pollution, S. D. Comp. Laws Ann. Chap. 34A-1, water pollution control, S. D. Comp. Laws Ann. Chap. 34A-2, and solid waste disposal, S. D. Comp. Laws Ann. Chap...

12 CFR 326.3 - Security program.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 5 2013-01-01 2013-01-01 false Security program. 326.3 Section 326.3 Banks and... SECURITY DEVICES AND PROCEDURES AND BANK SECRECY ACT 1 COMPLIANCE Minimum Security Procedures § 326.3 Security program. (a) Contents of security program. The security program shall: (1) Establish procedures...

12 CFR 326.3 - Security program.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 5 2014-01-01 2014-01-01 false Security program. 326.3 Section 326.3 Banks and... SECURITY DEVICES AND PROCEDURES AND BANK SECRECY ACT 1 COMPLIANCE Minimum Security Procedures § 326.3 Security program. (a) Contents of security program. The security program shall: (1) Establish procedures...

A bill to waive the requirement that existing traffic signs meet minimum retroreflectivity standards on or before the compliance dates established by the Federal Highway Administration.

THOMAS, 112th Congress

Sen. Corker, Bob [R-TN

2011-06-16

Senate - 06/16/2011 Read twice and referred to the Committee on Commerce, Science, and Transportation. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

49 CFR 194.107 - General response plan requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

...-situ burning and dispersants as provided for in the applicable ACPs; and (2) As a minimum, to be... threat” term is equivalent to abnormal operations outlined in 49 CFR 195.402(d). To comply with this... its manual for operations, maintenance, and emergencies, which is prepared in compliance with 49 CFR...

49 CFR 194.107 - General response plan requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

...-situ burning and dispersants as provided for in the applicable ACPs; and (2) As a minimum, to be... threat” term is equivalent to abnormal operations outlined in 49 CFR 195.402(d). To comply with this... its manual for operations, maintenance, and emergencies, which is prepared in compliance with 49 CFR...

49 CFR 194.107 - General response plan requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

...-situ burning and dispersants as provided for in the applicable ACPs; and (2) As a minimum, to be... threat” term is equivalent to abnormal operations outlined in 49 CFR 195.402(d). To comply with this... its manual for operations, maintenance, and emergencies, which is prepared in compliance with 49 CFR...

49 CFR 194.107 - General response plan requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

...-situ burning and dispersants as provided for in the applicable ACPs; and (2) As a minimum, to be... threat” term is equivalent to abnormal operations outlined in 49 CFR 195.402(d). To comply with this... its manual for operations, maintenance, and emergencies, which is prepared in compliance with 49 CFR...

76 FR 70516 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-14

... Budget for extension and approval. Rule 17Ad-6 requires every registered transfer agent to make and keep... taken to perform transfer agent activities (to ensure compliance with the minimum performance standards... appointment or termination of the transfer agent; (4) stop orders or notices of adverse claims to the...

14 CFR 13.81 - Order of immediate compliance.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Order of immediate compliance. 13.81 Section 13.81 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials...

14 CFR 13.77 - Consent order of compliance.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Consent order of compliance. 13.77 Section 13.77 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials...

14 CFR 13.77 - Consent order of compliance.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Consent order of compliance. 13.77 Section 13.77 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials...

14 CFR 13.77 - Consent order of compliance.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Consent order of compliance. 13.77 Section 13.77 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials...

14 CFR 13.77 - Consent order of compliance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Consent order of compliance. 13.77 Section 13.77 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials...

14 CFR 13.81 - Order of immediate compliance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Order of immediate compliance. 13.81 Section 13.81 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials...

14 CFR 13.81 - Order of immediate compliance.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Order of immediate compliance. 13.81 Section 13.81 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials...

14 CFR 13.77 - Consent order of compliance.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Consent order of compliance. 13.77 Section 13.77 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials...

14 CFR 13.81 - Order of immediate compliance.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Order of immediate compliance. 13.81 Section 13.81 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials...

14 CFR 13.81 - Order of immediate compliance.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Order of immediate compliance. 13.81 Section 13.81 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials...

49 CFR 178.33-1 - Compliance.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Compliance. 178.33-1 Section 178.33-1 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Containers, and Linings § 178.33-1 Compliance. (a) Required in all details. (b) [Reserved] ...

Minimum Detectable Dose as a Measure of Bioassay Programme Capability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carbaugh, Eugene H.

2003-01-01

This paper suggests that minimum detectable dose (MDD) be used to describe the capability of bioassay programs for which intakes are expected to be rare. This allows expression of the capability in units that correspond directly to primary dose limits. The concept uses the well-established analytical statistic minimum detectable amount (MDA) as the starting point and assumes MDA detection at a prescribed time post intake. The resulting dose can then be used as an indication of the adequacy or capability of the program for demonstrating compliance with the performance criteria. MDDs can be readily tabulated or plotted to demonstrate themore » effectiveness of different types of monitoring programs. The inclusion of cost factors for bioassay measurements can allow optimisation.« less

Minimum detectable dose as a measure of bioassay programme capability.

PubMed

Carbaugh, E H

2003-01-01

This paper suggests that minimum detectable dose (MDD) be used to describe the capability of bioassay programmes for which intakes are expected to be rare. This allows expression of the capability in units that correspond directly to primary dose limits. The concept uses the well established analytical statistic minimum detectable amount (MDA) as the starting point, and assumes MDA detection at a prescribed time post-intake. The resulting dose can then be used as an indication of the adequacy or capability of the programme for demonstrating compliance with the performance criteria. MDDs can be readily tabulated or plotted to demonstrate the effectiveness of different types of monitoring programmes. The inclusion of cost factors for bioassay measurements can allow optimisation.

Generation of structural topologies using efficient technique based on sorted compliances

NASA Astrophysics Data System (ADS)

Mazur, Monika; Tajs-Zielińska, Katarzyna; Bochenek, Bogdan

2018-01-01

Topology optimization, although well recognized is still widely developed. It has gained recently more attention since large computational ability become available for designers. This process is stimulated simultaneously by variety of emerging, innovative optimization methods. It is observed that traditional gradient-based mathematical programming algorithms, in many cases, are replaced by novel and e cient heuristic methods inspired by biological, chemical or physical phenomena. These methods become useful tools for structural optimization because of their versatility and easy numerical implementation. In this paper engineering implementation of a novel heuristic algorithm for minimum compliance topology optimization is discussed. The performance of the topology generator is based on implementation of a special function utilizing information of compliance distribution within the design space. With a view to cope with engineering problems the algorithm has been combined with structural analysis system Ansys.

49 CFR 178.33-1 - Compliance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Compliance. 178.33-1 Section 178.33-1 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY... Specifications for Inside Containers, and Linings § 178.33-1 Compliance. (a) Required in all details. (b...

Elastic, viscoelastic and viscoplastic contributions to compliance during deformation under stress in prosthodontic temporization materials.

PubMed

Vaidyanathan, Tritala K; Vaidyanathan, Jayalakshmi; Arghavani, David

2016-12-01

Purpose: The goal of this investigation was to characterize the compliance properties in selected polymers used for temporary (provisional crown and bridge) applications. Method: Polymethyl methacrylate (PMMA)- and polyethyl methacrylate (PEMA)-based JET and TRIM II were investigated along with two bisacryl composite resins (LUXATEMP and PROTEMP 3 GARANT). Rectangular samples of the resins were subjected to creep-recovery tests in a dynamic mechanical analyzer at and near the oral temperature (27 °C, 37 °C and 47 °C). The instantaneous (elastic), and time-dependent viscoelastic, and viscoplastic compliance profiles of the materials were determined and analyzed as a function of materials and temperature. Results: Highly significant ( p = 0.0001) differences among means of elastic, viscoelastic and viscoplastic compliance values were found as a function of materials. TRIM II showed an order of magnitude higher viscoplastic deformation than the other three materials (LUXATEMP, PROTEMP 3 GARANT and JET). Conclusions: The results indicate that PEMA is susceptible to significantly greater elastic, viscoelastic, and more importantly to viscoplastic compliant behavior compared with bisacryl composite and PMMA provisional crown and bridge materials. This indicates high-dimensional instability and poor stiffness and resiliency in PEMA appliances vis-à-vis those of PMMA and bisacryl composites.

Effect of system compliance on crack nucleation in soft materials

NASA Astrophysics Data System (ADS)

Rattan, Shruti; Crosby, Alfred

Puncture mechanics in soft materials is critical for the development of new surgical instruments, robot assisted-surgery as well as new materials used in personal protective equipment. However, analytical techniques to study this important deformation process are limited. We have previously described a simple experimental method to study the resistive forces and failure of a soft gel being indented with a small tip needle. We showed that puncture stresses can reach two orders of magnitude greater than the material modulus and that the force response is insensitive to the geometry of the indenter at large indentation depths. Currently, we are examining the influence of system compliance on crack nucleation (e.g. puncture) in soft gels. It is well known that system compliance influences the peak force in adhesion and traditional fracture experiments; however, its influence on crack nucleation is unresolved. We find that as the system becomes more compliant, lower peak forces required to puncture a gel of certain stiffness with the same indenter were measured. We are developing scaling relationships to relate the peak puncture force and system compliance. Our findings introduce new questions with regard to the possibility of intrinsic materials properties related to the critical stress and energy for crack nucleation in soft materials.

77 FR 59090 - Approval and Promulgation of Air Quality Implementation Plans; Pennsylvania; Adhesives and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-26

... material, such as copyrighted material, is not placed on the Internet and will be publicly available only..., sealants, primers, and solvents (76 FR 53369, August 26, 2011). The formal SIP revision was submitted by... federally enforceable rule: Emission limitations, compliance procedures and test methods, compliance dates...

49 CFR 397.2 - Compliance with Federal motor carrier safety regulations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Compliance with Federal motor carrier safety...) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS TRANSPORTATION OF HAZARDOUS MATERIALS; DRIVING AND PARKING RULES General § 397.2 Compliance with...

14 CFR 13.73 - Notice of proposed order of compliance.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Notice of proposed order of compliance. 13.73 Section 13.73 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials...

14 CFR 13.73 - Notice of proposed order of compliance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Notice of proposed order of compliance. 13.73 Section 13.73 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials...

14 CFR 13.73 - Notice of proposed order of compliance.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Notice of proposed order of compliance. 13.73 Section 13.73 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials...

14 CFR 13.73 - Notice of proposed order of compliance.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Notice of proposed order of compliance. 13.73 Section 13.73 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials...

14 CFR 13.73 - Notice of proposed order of compliance.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Notice of proposed order of compliance. 13.73 Section 13.73 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials...

Energy Efficiency Building Code for Commercial Buildings in Sri Lanka

DOE Office of Scientific and Technical Information (OSTI.GOV)

Busch, John; Greenberg, Steve; Rubinstein, Francis

2000-09-30

1.1.1 To encourage energy efficient design or retrofit of commercial buildings so that they may be constructed, operated, and maintained in a manner that reduces the use of energy without constraining the building function, the comfort, health, or the productivity of the occupants and with appropriate regard for economic considerations. 1.1.2 To provide criterion and minimum standards for energy efficiency in the design or retrofit of commercial buildings and provide methods for determining compliance with them. 1.1.3 To encourage energy efficient designs that exceed these criterion and minimum standards.

49 CFR 178.33a-1 - Compliance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Compliance. 178.33a-1 Section 178.33a-1 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY... Specifications for Inside Containers, and Linings § 178.33a-1 Compliance. (a) Required in all details. (b...

49 CFR 178.33a-1 - Compliance.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Compliance. 178.33a-1 Section 178.33a-1 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Containers, and Linings § 178.33a-1 Compliance. (a) Required in all details. (b) [Reserved] [Order 71, 31 FR...

49 CFR 178.33b-1 - Compliance.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Compliance. 178.33b-1 Section 178.33b-1 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... Containers, and Linings § 178.33b-1 Compliance. (a) Required in all details. (b) [Reserved] [74 FR 2268, Jan...

49 CFR 178.33b-1 - Compliance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Compliance. 178.33b-1 Section 178.33b-1 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY... Specifications for Inside Containers, and Linings § 178.33b-1 Compliance. (a) Required in all details. (b...

40 CFR Table 5 to Subpart Mmmmm of... - Continuous Compliance With Emission Limits and Operating Limits

Code of Federal Regulations, 2010 CFR

2010-07-01

... performance test. v. If you use a venturi scrubber, maintaining the daily average pressure drop across the.... Each new or reconstructed flame lamination affected source using a scrubber a. Maintain the daily average scrubber inlet liquid flow rate above the minimum value established during the performanceb...

32 CFR Appendix A to Part 32 - Contract Provisions

Code of Federal Regulations, 2013 CFR

2013-07-01

... to laborers and mechanics at a rate not less than the minimum wages specified in a wage determination... involve the employment of mechanics or laborers shall include a provision for compliance with sections 102... required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40...

32 CFR Appendix A to Part 32 - Contract Provisions

Code of Federal Regulations, 2011 CFR

2011-07-01

... to laborers and mechanics at a rate not less than the minimum wages specified in a wage determination... involve the employment of mechanics or laborers shall include a provision for compliance with sections 102... required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40...

32 CFR Appendix A to Part 32 - Contract Provisions

Code of Federal Regulations, 2012 CFR

2012-07-01

... to laborers and mechanics at a rate not less than the minimum wages specified in a wage determination... involve the employment of mechanics or laborers shall include a provision for compliance with sections 102... required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40...

32 CFR Appendix A to Part 32 - Contract Provisions

Code of Federal Regulations, 2014 CFR

2014-07-01

... to laborers and mechanics at a rate not less than the minimum wages specified in a wage determination... involve the employment of mechanics or laborers shall include a provision for compliance with sections 102... required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40...

40 CFR Appendix to Part 30 - Contract Provisions

Code of Federal Regulations, 2013 CFR

2013-07-01

... to laborers and mechanics at a rate not less than the minimum wages specified in a wage determination... contracts that involve the employment of mechanics or laborers shall include a provision for compliance with... shall be required to compute the wages of every mechanic and laborer on the basis of a standard work...

40 CFR Appendix to Part 30 - Contract Provisions

Code of Federal Regulations, 2014 CFR

2014-07-01

... to laborers and mechanics at a rate not less than the minimum wages specified in a wage determination... contracts that involve the employment of mechanics or laborers shall include a provision for compliance with... shall be required to compute the wages of every mechanic and laborer on the basis of a standard work...

40 CFR Appendix to Part 30 - Contract Provisions

Code of Federal Regulations, 2012 CFR

2012-07-01

... to laborers and mechanics at a rate not less than the minimum wages specified in a wage determination... contracts that involve the employment of mechanics or laborers shall include a provision for compliance with... shall be required to compute the wages of every mechanic and laborer on the basis of a standard work...

40 CFR 63.5725 - What are the requirements for monitoring and demonstrating continuous compliance?

Code of Federal Regulations, 2012 CFR

2012-07-01

... temperature monitoring device. (i) Locate the temperature sensor in a position that provides a representative temperature. (ii) Use a temperature sensor with a minimum tolerance of 2.2 °C or 0.75 percent of the temperature value, whichever is larger. (iii) Shield the temperature sensor system from electromagnetic...

40 CFR Table 5 to Subpart Hhhhhhh... - Operating Parameters, Operating Limits and Data Monitoring, Recording and Compliance Frequencies...

Code of Federal Regulations, 2013 CFR

2013-07-01

... conductivity Continuous Every 15 minutes 3-hour block average. Regenerative Adsorber Regeneration stream flow. Minimum total flow per regeneration cycle Continuous N/A Total flow for each regeneration cycle. Adsorber bed temperature. Maximum temperature Continuously after regeneration and within 15 minutes of...

40 CFR Table 5 to Subpart Hhhhhhh... - Operating Parameters, Operating Limits and Data Monitoring, Recording and Compliance Frequencies...

Code of Federal Regulations, 2014 CFR

2014-07-01

... conductivity Continuous Every 15 minutes 3-hour block average. Regenerative Adsorber Regeneration stream flow. Minimum total flow per regeneration cycle Continuous N/A Total flow for each regeneration cycle. Adsorber bed temperature. Maximum temperature Continuously after regeneration and within 15 minutes of...

40 CFR 63.5725 - What are the requirements for monitoring and demonstrating continuous compliance?

Code of Federal Regulations, 2010 CFR

2010-07-01

... temperature monitoring device. (i) Locate the temperature sensor in a position that provides a representative temperature. (ii) Use a temperature sensor with a minimum tolerance of 2.2 °C or 0.75 percent of the temperature value, whichever is larger. (iii) Shield the temperature sensor system from electromagnetic...

40 CFR 63.5725 - What are the requirements for monitoring and demonstrating continuous compliance?

Code of Federal Regulations, 2011 CFR

2011-07-01

... temperature monitoring device. (i) Locate the temperature sensor in a position that provides a representative temperature. (ii) Use a temperature sensor with a minimum tolerance of 2.2 °C or 0.75 percent of the temperature value, whichever is larger. (iii) Shield the temperature sensor system from electromagnetic...

40 CFR 62.14452 - What test methods and procedures must I use?

Code of Federal Regulations, 2010 CFR

2010-07-01

... total dioxin/furan emissions. The minimum sample time must be 4 hours per test run. If you have selected the toxic equivalency standards for dioxin/furans under § 62.14411, you must use the following procedures to determine compliance: (1) Measure the concentration of each dioxin/furan tetra-through octa...

14 CFR 91.905 - List of rules subject to waivers.

Code of Federal Regulations, 2010 CFR

2010-01-01

....113Right-of-way rules: Except water operations. 91.115Right-of-way rules: Water operations. 91.117Aircraft speed. 91.119Minimum safe altitudes: General. 91.121Altimeter settings. 91.123Compliance with ATC... between Mexico or Canada and the United States. 91.713Operation of civil aircraft of Cuban registry. [Doc...

14 CFR 91.905 - List of rules subject to waivers.

Code of Federal Regulations, 2011 CFR

2011-01-01

....113Right-of-way rules: Except water operations. 91.115Right-of-way rules: Water operations. 91.117Aircraft speed. 91.119Minimum safe altitudes: General. 91.121Altimeter settings. 91.123Compliance with ATC... between Mexico or Canada and the United States. 91.713Operation of civil aircraft of Cuban registry. [Doc...

44 CFR 60.2 - Minimum compliance with flood plain management criteria.

Code of Federal Regulations, 2012 CFR

2012-10-01

... period of six months from the date the Federal Insurance Administrator provides the data set forth in... for eligibility directly under the standards set forth in § 60.3(b). Thereafter, the community will be given a period of six months from the date the Federal Insurance Administrator provides the data set...

44 CFR 60.2 - Minimum compliance with flood plain management criteria.

Code of Federal Regulations, 2014 CFR

2014-10-01

... period of six months from the date the Federal Insurance Administrator provides the data set forth in... for eligibility directly under the standards set forth in § 60.3(b). Thereafter, the community will be given a period of six months from the date the Federal Insurance Administrator provides the data set...

44 CFR 60.2 - Minimum compliance with flood plain management criteria.

Code of Federal Regulations, 2011 CFR

2011-10-01

... period of six months from the date the Federal Insurance Administrator provides the data set forth in... for eligibility directly under the standards set forth in § 60.3(b). Thereafter, the community will be given a period of six months from the date the Federal Insurance Administrator provides the data set...

44 CFR 60.2 - Minimum compliance with flood plain management criteria.

Code of Federal Regulations, 2010 CFR

2010-10-01

... period of six months from the date the Federal Insurance Administrator provides the data set forth in... for eligibility directly under the standards set forth in § 60.3(b). Thereafter, the community will be given a period of six months from the date the Federal Insurance Administrator provides the data set...

44 CFR 60.2 - Minimum compliance with flood plain management criteria.

Code of Federal Regulations, 2013 CFR

2013-10-01

... period of six months from the date the Federal Insurance Administrator provides the data set forth in... for eligibility directly under the standards set forth in § 60.3(b). Thereafter, the community will be given a period of six months from the date the Federal Insurance Administrator provides the data set...

7 CFR 2902.34 - Carpet and upholstery cleaners.

Code of Federal Regulations, 2010 CFR

2010-01-01

... upholstery cleaners shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product. The applicable minimum biobased... compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a...

24 CFR 200.949 - Building product standards and certification program for exterior insulated steel door systems.

Code of Federal Regulations, 2010 CFR

2010-04-01

... INTRODUCTION TO FHA PROGRAMS Minimum Property Standards § 200.949 Building product standards and certification... product, the administrator's certification of compliance with the applicable standards is required to be... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Building product standards and...

24 CFR 200.947 - Building product standards and certification program for polystyrene foam insulation board.

Code of Federal Regulations, 2010 CFR

2010-04-01

... INTRODUCTION TO FHA PROGRAMS Minimum Property Standards § 200.947 Building product standards and certification... product, the administrator's certification of compliance with the applicable standards and the type of... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Building product standards and...

40 CFR 63.1365 - Test methods and initial compliance procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... temperature of 760 °C, the design evaluation must document that these conditions exist. (ii) For a combustion... autoignition temperature of the organic HAP, must consider the vent stream flow rate, and must establish the design minimum and average temperature in the combustion zone and the combustion zone residence time. (B...

40 CFR 63.1365 - Test methods and initial compliance procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... temperature of 760 °C, the design evaluation must document that these conditions exist. (ii) For a combustion... autoignition temperature of the organic HAP, must consider the vent stream flow rate, and must establish the design minimum and average temperature in the combustion zone and the combustion zone residence time. (B...

40 CFR 63.1365 - Test methods and initial compliance procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... temperature of 760 °C, the design evaluation must document that these conditions exist. (ii) For a combustion... autoignition temperature of the organic HAP, must consider the vent stream flow rate, and must establish the design minimum and average temperature in the combustion zone and the combustion zone residence time. (B...

40 CFR 63.1365 - Test methods and initial compliance procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... temperature of 760 °C, the design evaluation must document that these conditions exist. (ii) For a combustion... autoignition temperature of the organic HAP, must consider the vent stream flow rate, and must establish the design minimum and average temperature in the combustion zone and the combustion zone residence time. (B...

77 FR 25215 - Self-Regulatory Organizations; Chicago Mercantile Exchange Inc.; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-27

... Change To Amend Rules Regarding Clearing Member Anti-Money Laundering Programs April 23, 2012. Pursuant.... RULEBOOK Rule 100-980--No Change. * * * * * Chapter 9. Clearing Members Rule 981. ANTI-MONEY LAUNDERING AND... Commodity Futures Trading Commission. That [anti-money laundering] compliance program shall, at a minimum, 1...

40 CFR Table 7 to Subpart Jjjjjj... - Demonstrating Continuous Compliance

Code of Federal Regulations, 2013 CFR

2013-07-01

... § 63.11211. 4. Dry Scrubber Sorbent or Activated Carbon Injection Rate a. Collecting the sorbent or activated carbon injection rate monitoring system data for the dry scrubber according to §§ 63.11224 and 63... average sorbent or activated carbon injection rate at or above the minimum sorbent or activated carbon...

40 CFR Table 7 to Subpart Jjjjjj... - Demonstrating Continuous Compliance

Code of Federal Regulations, 2014 CFR

2014-07-01

... § 63.11211. 4. Dry Scrubber Sorbent or Activated Carbon Injection Rate a. Collecting the sorbent or activated carbon injection rate monitoring system data for the dry scrubber according to §§ 63.11224 and 63... average sorbent or activated carbon injection rate at or above the minimum sorbent or activated carbon...

12 CFR 326.4 - Reports.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 4 2011-01-01 2011-01-01 false Reports. 326.4 Section 326.4 Banks and Banking... DEVICES AND PROCEDURES AND BANK SECRECY ACT 1 COMPLIANCE Minimum Security Procedures § 326.4 Reports. The security officer for each insured nonmember bank shall report at least annually to the bank's board of...

12 CFR 326.4 - Reports.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 5 2012-01-01 2012-01-01 false Reports. 326.4 Section 326.4 Banks and Banking... DEVICES AND PROCEDURES AND BANK SECRECY ACT 1 COMPLIANCE Minimum Security Procedures § 326.4 Reports. The security officer for each insured nonmember bank shall report at least annually to the bank's board of...

12 CFR 326.4 - Reports.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 5 2013-01-01 2013-01-01 false Reports. 326.4 Section 326.4 Banks and Banking... DEVICES AND PROCEDURES AND BANK SECRECY ACT 1 COMPLIANCE Minimum Security Procedures § 326.4 Reports. The security officer for each insured nonmember bank shall report at least annually to the bank's board of...

12 CFR 326.4 - Reports.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 5 2014-01-01 2014-01-01 false Reports. 326.4 Section 326.4 Banks and Banking... DEVICES AND PROCEDURES AND BANK SECRECY ACT 1 COMPLIANCE Minimum Security Procedures § 326.4 Reports. The security officer for each insured nonmember bank shall report at least annually to the bank's board of...

29 CFR 528.4 - According opportunity to demonstrate or achieve compliance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... OR IN RETAIL OR SERVICE ESTABLISHMENTS AT SPECIAL MINIMUM WAGE RATES § 528.4 According opportunity to.... 528.4 Section 528.4 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT... wages improperly withheld and by taking steps adequate to insure that new cause for annulment or...

40 CFR Table 5 to Subpart Mmmmm of... - Continuous Compliance With Emission Limits and Operating Limits

Code of Federal Regulations, 2011 CFR

2011-07-01

.... Each new or reconstructed flame lamination affected source using a scrubber a. Maintain the daily average scrubber inlet liquid flow rate above the minimum value established during the performanceb. Maintain the daily average scrubber effluent pH within the operating range established during the...

Strain energy release rate analysis of the end-notched flexure specimen using the finite-element method

NASA Technical Reports Server (NTRS)

Salpekar, S. A.; Raju, I. S.; O'Brien, T. K.

1988-01-01

Two-dimensional finite-element analysis of the end-notched flexure specimen was performed using 8-node isoparametric, parabolic elements to evaluate compliance and mode II strain energy release rates, G sub II. The G sub II values were computed using two different techniques: the virtual crack-closure technique (VCCT) and the rate of change of compliance with crack length (compliance derivative method). The analysis was performed for various crack-length-to-semi-span (a/L) ratios ranging from 0.2 to 0.9. Three material systems representing a wide range of material properties were analyzed. The compliance and strain energy release rates of the specimen calculated with the present finite-element analysis agree very well with beam theory equations including transverse shear. The G sub II values calculated using the compliance derivative method compared extremely well with those calculated using the VCCT. The G sub II values obtained by the compliance derivative method using the top or bottom beam deflections agreed closely with each other. The strain energy release rates from a plane-stress analysis were higher than the plane-strain values by only a small percentage, indicating that either assumption may be used in the analysis. The G sub II values for one material system calculated from the finte-element analysis agreed with one solution in the literature and disagreed with the other solution in the literature.

Strain-energy-release rate analysis of the end-notched flexure specimen using the finite-element method

NASA Technical Reports Server (NTRS)

Salpekar, S. A.; Raju, I. S.; Obrien, T. K.

1987-01-01

Two-dimensional finite-element analysis of the end-notched flexure specimen was performed using 8-node isoparametric, parabolic elements to evaluate compliance and mode II strain energy release rates, G sub II. The G sub II values were computed using two different techniques: the virtural crack-closure technique (VCCT) and the rate of change of compliance with crack length (compliance derivative method). The analysis was performed for various crack-length-to-semi-span (a/L) ratios ranging from 0.2 to 0.9. Three material systems representing a wide range of material properties were analyzed. The compliance and strain energy release rates of the specimen calculated with the present finite-element analysis agree very well with beam theory equations including transverse shear. The G sub II values calculated using the compliance derivative method compared extremely well with those calculated using the VCCT. The G sub II values obtained by the compliance derivative method using the top or bottom beam deflections agreed closely with each other. The strain energy release rates from a plane-stress analysis were higher than the plane-strain values by only a small percentage, indicating that either assumption may be used in the analysis. The G sub II values for one material system calculated from the finite-element analysis agreed with one solution in the literature and disagreed with the other solution in the literature.

12 CFR 133.9 - Compliance provisions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 1 2012-01-01 2012-01-01 false Compliance provisions. 133.9 Section 133.9... CRA-RELATED AGREEMENTS § 133.9 Compliance provisions. (a) Willful failure to comply with disclosure... material way with §§ 133.6 or 133.7 of this part, the OCC will notify the NGEP in writing of that...

40 CFR 63.7937 - How do I demonstrate initial compliance with the general standards?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Remediation General Compliance Requirements § 63.7937 How do I demonstrate initial compliance with the general... remediation material treated or managed by the process vented through the affected process vents has an..., according to the procedures § 63.7943, and recorded the average VOHAP concentration of the remediation...

Compliance of off-premise alcohol retailers with the minimum purchase age law.

PubMed

Puangsuwan, Areekul; Phakdeesettakun, Kannapon; Thamarangsi, Thaksaphon; Chaiyasong, Surasak

2012-01-01

In Thailand, the 2008 Alcoholic Beverages Control Act set the minimum purchase age (MPA) at 20 years old in order to limit new drinkers as part of the overall alcohol control effort. This study aims to assess the compliance of off-premise alcohol retailers with MPA restrictions and to identify factors affecting sales to adolescents. A decoy protocol was used to quantify compliance of 417 alcohol retailers from three categories, namely grocers, modern minimarts and department stores. Multi-stage sampling was applied to obtain the samples in four provinces: Bangkok, Nakorn Sawan, Songkhla and Surin. Each alcohol retailer was visited twice by 17-19 year-old male and female adolescents who tried to buy alcohol. Information collected from focus groups and in-depth interviews with vendors and management officers were analysed for the qualitative methodology. Of all 834 buying attempts undertaken by the underage adolescent, 98.7% were successful in buying alcohol. Only 0.9% were asked for age and 0.1% were requested to show an ID card. Age and ID verifications were statistically significant to buying success as well as province, while number of vendors, gender and age of vendors and buyers, type of outlet, law cautions and advertisement signs in the outlet demonstrated no significant association. The results showed that vendors fail to comply with the law despite the fact that they know the law. Enforcement needs to be strengthened to effectively limit new drinkers.

7 CFR 301.89-7 - Compliance agreements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... such persons review with an inspector each provision of the compliance agreement, have facilities and equipment to carry out disinfestation procedures or application of chemical materials in accordance with...

40 CFR 63.3151 - How do I demonstrate initial compliance with the emission limitations?

Code of Federal Regulations, 2012 CFR

2012-07-01

... paragraph (d) of this section. (a) Determine the mass fraction of organic HAP for each material used. You must determine the mass fraction of organic HAP for each material used during the compliance period by... 40 CFR part 63). You may use Method 311 for determining the mass fraction of organic HAP. Use the...

45 CFR Appendix A to Part 74 - Contract Provisions

Code of Federal Regulations, 2012 CFR

2012-10-01

... mechanics at a rate not less than the minimum wages specified in a wage determination made by the Secretary... the employment of mechanics or laborers shall include a provision for compliance with sections 102 and... required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40...

45 CFR Appendix A to Part 74 - Contract Provisions

Code of Federal Regulations, 2014 CFR

2014-10-01

... mechanics at a rate not less than the minimum wages specified in a wage determination made by the Secretary... the employment of mechanics or laborers shall include a provision for compliance with sections 102 and... required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40...

45 CFR Appendix A to Part 74 - Contract Provisions

Code of Federal Regulations, 2011 CFR

2011-10-01

... mechanics at a rate not less than the minimum wages specified in a wage determination made by the Secretary... the employment of mechanics or laborers shall include a provision for compliance with sections 102 and... required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40...

15 CFR Appendix A to Part 14 - Contract Provisions

Code of Federal Regulations, 2012 CFR

2012-01-01

... mechanics at a rate not less than the minimum wages specified in a wage determination made by the Secretary... of mechanics or laborers shall include a provision for compliance with Sections 102 and 107 of the... wages of every mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of...

15 CFR Appendix A to Part 14 - Contract Provisions

Code of Federal Regulations, 2013 CFR

2013-01-01

... mechanics at a rate not less than the minimum wages specified in a wage determination made by the Secretary... of mechanics or laborers shall include a provision for compliance with Sections 102 and 107 of the... wages of every mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of...

45 CFR Appendix A to Part 74 - Contract Provisions

Code of Federal Regulations, 2013 CFR

2013-10-01

... mechanics at a rate not less than the minimum wages specified in a wage determination made by the Secretary... the employment of mechanics or laborers shall include a provision for compliance with sections 102 and... required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40...

15 CFR Appendix A to Part 14 - Contract Provisions

Code of Federal Regulations, 2014 CFR

2014-01-01

... mechanics at a rate not less than the minimum wages specified in a wage determination made by the Secretary... of mechanics or laborers shall include a provision for compliance with Sections 102 and 107 of the... wages of every mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of...

40 CFR 60.3044 - Is there a minimum amount of operating parameter monitoring data I must obtain?

Code of Federal Regulations, 2011 CFR

2011-07-01

... Emission Guidelines and Compliance Times for Other Solid Waste Incineration Units That Commenced... checks and required zero and span adjustments of the monitoring system), you must conduct all monitoring.... An operating day is any day the unit combusts any municipal or institutional solid waste. (c) If you...

40 CFR 60.3044 - Is there a minimum amount of operating parameter monitoring data I must obtain?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Emission Guidelines and Compliance Times for Other Solid Waste Incineration Units That Commenced... checks and required zero and span adjustments of the monitoring system), you must conduct all monitoring.... An operating day is any day the unit combusts any municipal or institutional solid waste. (c) If you...

40 CFR 60.3044 - Is there a minimum amount of operating parameter monitoring data I must obtain?

Code of Federal Regulations, 2012 CFR

2012-07-01

... Emission Guidelines and Compliance Times for Other Solid Waste Incineration Units That Commenced... checks and required zero and span adjustments of the monitoring system), you must conduct all monitoring.... An operating day is any day the unit combusts any municipal or institutional solid waste. (c) If you...

40 CFR 60.3044 - Is there a minimum amount of operating parameter monitoring data I must obtain?

Code of Federal Regulations, 2014 CFR

2014-07-01

... Emission Guidelines and Compliance Times for Other Solid Waste Incineration Units That Commenced... checks and required zero and span adjustments of the monitoring system), you must conduct all monitoring.... An operating day is any day the unit combusts any municipal or institutional solid waste. (c) If you...

40 CFR 60.3044 - Is there a minimum amount of operating parameter monitoring data I must obtain?

Code of Federal Regulations, 2013 CFR

2013-07-01

... Emission Guidelines and Compliance Times for Other Solid Waste Incineration Units That Commenced... checks and required zero and span adjustments of the monitoring system), you must conduct all monitoring.... An operating day is any day the unit combusts any municipal or institutional solid waste. (c) If you...

17 CFR Appendix B to Part 255 - Enhanced Minimum Standards for Compliance Programs

Code of Federal Regulations, 2014 CFR

2014-04-01

... documentation for market making-related activities conducted in reliance on § 255.4(b) and for hedging activity... activities; iii. The mission (i.e., the type of trading activity, such as market-making, trading in sovereign... arrangements for traders engaged in underwriting or market making-related activities under § 255.4 or risk...

17 CFR Appendix B to Part 38 - Guidance on, and Acceptable Practices in, Compliance With Core Principles

Code of Federal Regulations, 2013 CFR

2013-04-01

... decision-making and implementation of emergency intervention in the market. At a minimum, the DCM must have... COMMODITY FUTURES TRADING COMMISSION DESIGNATED CONTRACT MARKETS Pt. 38, App. B Appendix B to Part 38... the core principle is illustrative only of the types of matters a designated contract market may...

17 CFR Appendix B to Part 38 - Guidance on, and Acceptable Practices in, Compliance With Core Principles

Code of Federal Regulations, 2014 CFR

2014-04-01

.... The designated contract market must demonstrate that it is making a good-faith effort to resolve... decision-making and implementation of emergency intervention in the market. At a minimum, the DCM must have... COMMODITY FUTURES TRADING COMMISSION DESIGNATED CONTRACT MARKETS Pt. 38, App. B Appendix B to Part 38...

75 FR 37498 - Self-Regulatory Organizations; NYSE Arca, Inc.; Notice of Filing of Proposed Rule Change...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-29

... of a code of ethics by an investment advisor to include, at a minimum: (i) Standards of business... any violations of the code of ethics promptly to the chief compliance officer (``CCO'') or, provided the CCO also receives reports of all violations, to other persons designated in the code of ethics...

34 CFR 366.63 - What evidence must a center present to demonstrate that it is in minimum compliance with the...

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Provides IL services to eligible individuals or groups of individuals without restrictions based on the particular type or types of significant disability of an individual or group of individuals, unless the... skills training. (ii) Peer counseling (including cross-disability peer counseling). (iii) Individual and...

The Use of De Jure to Maintain a De Facto Status Quo

ERIC Educational Resources Information Center

Gallard Martínez, Alejandro José; Antrop-González, René

2013-01-01

The vignette we use as the introduction works to define and distinguish the concepts of de jure and de facto pedagogical actions, especially as related to Latin@ education and its relationship with STEM fields. The authors assert that de jure educational policies, which are often legal guidelines that mandate minimum levels of compliance,…

40 CFR Table 7 to Subpart Jjjjjj... - Demonstrating Continuous Compliance

Code of Federal Regulations, 2012 CFR

2012-07-01

... § 63.1140. 4. Dry scrubber sorbent or carbon injection rate a. Collecting the sorbent or carbon injection rate monitoring system data for the dry scrubber according to §§ 63.11224 and 63.11220; and b... injection rate at or above the minimum sorbent or carbon injection rate as defined in § 63.11237. 5...

40 CFR Table 7 to Subpart Jjjjjj... - Demonstrating Continuous Compliance

Code of Federal Regulations, 2011 CFR

2011-07-01

... § 63.1140. 4. Dry scrubber sorbent or carbon injection rate a. Collecting the sorbent or carbon injection rate monitoring system data for the dry scrubber according to §§ 63.11224 and 63.11220; and b... injection rate at or above the minimum sorbent or carbon injection rate as defined in § 63.11237. 5...

40 CFR 60.2145 - How do I demonstrate continuous compliance with the emission limitations and the operating limits?

Code of Federal Regulations, 2011 CFR

2011-07-01

... NEW STATIONARY SOURCES Standards of Performance for Commercial and Industrial Solid Waste Incineration...-to-fuel switch. (4) If you own or operate an existing commercial or industrial combustion unit that... internal and external corrosion. (3) Use a pressure sensor with a minimum tolerance of 1.27 centimeters of...

40 CFR 60.2145 - How do I demonstrate continuous compliance with the emission limitations and the operating limits?

Code of Federal Regulations, 2012 CFR

2012-07-01

... NEW STATIONARY SOURCES Standards of Performance for Commercial and Industrial Solid Waste Incineration...-to-fuel switch. (4) If you own or operate an existing commercial or industrial combustion unit that... internal and external corrosion. (3) Use a pressure sensor with a minimum tolerance of 1.27 centimeters of...

40 CFR 60.2145 - How do I demonstrate continuous compliance with the emission limitations and the operating limits?

Code of Federal Regulations, 2013 CFR

2013-07-01

... NEW STATIONARY SOURCES Standards of Performance for Commercial and Industrial Solid Waste Incineration... own or operate an existing commercial or industrial combustion unit that combusted a fuel or non-waste... internal and external corrosion. (3) Use a pressure sensor with a minimum tolerance of 1.27 centimeters of...

40 CFR 60.2145 - How do I demonstrate continuous compliance with the emission limitations and the operating limits?

Code of Federal Regulations, 2014 CFR

2014-07-01

... NEW STATIONARY SOURCES Standards of Performance for Commercial and Industrial Solid Waste Incineration... own or operate an existing commercial or industrial combustion unit that combusted a fuel or non-waste... external corrosion. (3) Use a pressure sensor with a minimum tolerance of 1.27 centimeters of water or a...

76 FR 6503 - Self-Regulatory Organizations; NYSE Arca, Inc.; Order Granting Approval of Proposed Rule Change...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-04

... specifically requires the adoption of a code of ethics by an investment advisor to include, at a minimum: (i... persons to report any violations of the code of ethics promptly to the chief compliance officer (``CCO... of ethics; and (v) provisions requiring the investment advisor to provide each of the supervised...

78 FR 61408 - Self-Regulatory Organizations; The NASDAQ Stock Market LLC; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-03

... continues for a period of 30 consecutive business days. Upon such failure, the Company shall be notified.... Compliance can be achieved by meeting the applicable standard for a minimum of 10 consecutive business days... the deficiency continues for a period of 30 consecutive business days. Upon such failure, the Company...

77 FR 42748 - Agency Information Collection Activities: Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-20

... review by the Office of Management and Budget (OMB), in compliance with the Paperwork Reduction Act of... request has been submitted to the Office of Management and Budget for review under the Paperwork Reduction... minimum of 2 years of service as a full-time or part-time faculty member of an accredited health...

40 CFR Table 11 to Subpart Xxxx of... - Minimum Data for Continuous Compliance With the Emission Limits for Tire Cord Production Affected...

Code of Federal Regulations, 2013 CFR

2013-07-01

...) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emissions Standards for Hazardous Air Pollutants: Rubber Tire Manufacturing Pt. 63, Subpt. XXXX, Table 11... method, test results, indicating the mass percent of each HAP for coating used.b. The mass of each...

Materials and Processes for the New Millennium

NASA Technical Reports Server (NTRS)

Hayes, Paul W.; Richardson, Rod W.

2004-01-01

The single greatest threat to material availability over the last decade has been Compliance to New Environmental Regulations. Federal Regulations: a) Clean Air Acts Amendments - 1990 - Titles I, III and VI; b) NASA Interim Policy- 1995 end date; c) Montreal Protocol - 2000 and 2005 end dates; d) Industrial Toxics Project - HAP emissions by 1995; e) Florida DER - VOC limits by 1995 (CA); f) OSHA Health Related Regulations 1) Carcinogens 2) Mutagens 3). Material availability is complicated by local and state regulations and their own compliance schedules.

The Role of Molecular Weight and Temperature on the Elastic and Viscoelastic Properties of a Glassy Thermoplastic Polyimide

NASA Technical Reports Server (NTRS)

Nicholson, Lee M.; Whitley, Karen S.; Gates, Thomas S.

2001-01-01

Mechanical testing of the elastic and viscoelastic response of an advanced thermoplastic polyimide (LaRC-SI) with known variations in molecular weight was performed over a range of temperatures below the glass transition temperature. The notched tensile strength was shown to be a strong function of both molecular weight and temperature, whereas stiffness was only a strong function of temperature. A critical molecular weight was observed to occur at a weight average molecular weight of M, approx. 22,000 g/mol below which, the notched tensile strength decreases rapidly. This critical molecular weight transition is temperature-independent. Low, molecular weight materials tended to fail in a brittle manner, whereas high molecular weight materials exhibited ductile failure. Furthermore, low molecular weight materials have increased creep compliance and creep compliance rate, and are more sensitive to temperature than the high molecular weight materials. At long timescales (less than 1100 hours) physical aging serves to significantly decrease the creep compliance and creep rate of all the materials tested. Low molecular weight materials are less influenced by the effects of physical aging.

40 CFR 63.4161 - How do I demonstrate initial compliance?

Code of Federal Regulations, 2014 CFR

2014-07-01

... compliance period, kg. AI = total mass of organic HAP in the coatings used in the controlled coating... this section: ER23JY02.007 Where: AI = mass of organic HAP in the coatings used in the controlled... recovery system using a liquid-liquid material balance during the compliance period, kg. AI = total mass of...

40 CFR 63.4161 - How do I demonstrate initial compliance?

Code of Federal Regulations, 2012 CFR

2012-07-01

... compliance period, kg. AI = total mass of organic HAP in the coatings used in the controlled coating... this section: ER23JY02.007 Where: AI = mass of organic HAP in the coatings used in the controlled... recovery system using a liquid-liquid material balance during the compliance period, kg. AI = total mass of...

40 CFR 63.4161 - How do I demonstrate initial compliance?

Code of Federal Regulations, 2010 CFR

2010-07-01

... compliance period, kg. AI = total mass of organic HAP in the coatings used in the controlled coating... this section: ER23JY02.007 Where: AI = mass of organic HAP in the coatings used in the controlled... recovery system using a liquid-liquid material balance during the compliance period, kg. AI = total mass of...

Polymerization stress evolution of a bulk-fill flowable composite under different compliances.

PubMed

Guo, Yongwen; Landis, Forrest A; Wang, Zhengzhi; Bai, Ding; Jiang, Li; Chiang, Martin Y M

2016-04-01

To use a compliance-variable instrument to simultaneously measure and compare the polymerization stress (PS) evolution, degree of conversion (DC), and exotherm of a bulk-fill flowable composite to a packable composite. A bulk-fill flowable composite (Filtek Bulk-fill, FBF) and a conventional packable composite (Filtek Z250, Z250) purchased from 3M ESPE were investigated. The composites were studied using a cantilever-beam based instrument equipped with an in situ near infrared (NIR) spectrometer and a microprobe thermocouple. The measurements were carried out under various instrumental compliances (ranging from 0.3327μm/N to 12.3215μm/N) that are comparable to the compliances of clinically prepared tooth cavities. Correlations between the PS and temperature change as well as the DC were interpreted. The maximum PS of both composites at 10min after irradiation decreased with the increase in the compliance of the cantilever beam. The FBF composite generated a lower final stress than the Z250 sample under instrumental compliances less than ca. 4μm/N; however, both materials generated statistically similar PS values at higher compliances. The reaction exotherm and the DC of both materials were found to be independent of compliance. The DC of the FBF sample was slightly higher than that of the packable Z250 composite while the peak exotherm of FBF was almost double that of the Z250 composite. For FBF, a characteristic drop in the PS was observed during the early stage of polymerization for all compliances studied which was not observed in the Z250 sample. This drop was shown to relate to the greater exotherm of the less-filled FBF sample relative to the Z250 composite. While the composites with lower filler content (low viscosity) are generally considered to have lower PS than the conventional packable composites, a bulk-fill flowable composite was shown to produce lower PS under a lower compliance of constraint as would be experienced if the composite was used as the base material in clinical procedures. Published by Elsevier Ltd.

Multiple testing of food contact materials: a predictive algorithm for assessing the global migration from silicone moulds.

PubMed

Elskens, Marc; Vloeberghs, Daniel; Van Elsen, Liesbeth; Baeyens, Willy; Goeyens, Leo

2012-09-15

For reasons of food safety, packaging and food contact materials must be submitted to migration tests. Testing of silicone moulds is often very laborious, since three replicate tests are required to decide about their compliancy. This paper presents a general modelling framework to predict the sample's compliance or non-compliance using results of the first two migration tests. It compares the outcomes of models with multiple continuous predictors with a class of models involving latent and dummy variables. The model's prediction ability was tested using cross and external validations, i.e. model revalidation each time a new measurement set became available. At the overall migration limit of 10 mg dm(-2), the relative uncertainty on a prediction was estimated to be ~10%. Taking the default values for α and β equal to 0.05, the maximum value that can be predicted for sample compliance was therefore 7 mg dm(-2). Beyond this limit the risk for false compliant results increases significantly, and a third migration test should be performed. The result of this latter test defines the sample's compliance or non-compliance. Propositions for compliancy control inspired by the current dioxin control strategy are discussed. Copyright © 2012 Elsevier B.V. All rights reserved.

Compliance with youth access regulations for indoor UV tanning.

PubMed

Hester, Eric J; Heilig, Lauren F; D'Ambrosia, Renee; Drake, Amanda L; Schilling, Lisa M; Dellavalle, Robert P

2005-08-01

To describe youth access to indoor UV tanning and youth discount pricing incentives in 4 states with different age restrictions: Colorado (no age restrictions), Texas (age 13 years), Illinois (age 14 years), and Wisconsin (age 16 years). Cross-sectional telephone survey conducted in October 2003 using a standardized script to assess the practices of randomly selected UV tanning operators. Randomly selected licensed indoor UV tanning facility operators in Colorado, Texas, Illinois, and Wisconsin. Number of facilities (1) complying with indoor UV tanning minimum age regulations for a 12-year-old potential patron and a 15-year-old potential patron and (2) offering youth discounts. For a 12-year-old potential patron, 62% of facilities in states with minimum age restrictions prohibiting 12-year-olds had an operator report that they would not permit indoor tanning (Texas, 23%; Illinois, 74%; and Wisconsin, 89%) compared with 18% in Colorado, a state without youth access regulations. For a 15-year-old patron, most facilities in Wisconsin, the only state with a minimum age restriction for 15-year-olds, prohibited access (77%). Overall, 15% of operators offered youth discounts: Texas, 23%; Illinois, 14%; Wisconsin, 11%; and Colorado, 11%. Tanning facilities in 4 states offered price incentives directed at youths. State youth access regulations were associated with decreased youth access to indoor tanning. High compliance levels in states with long-standing youth access regulations (Illinois and Wisconsin) demonstrate the potential for successful tanning industry youth access regulation.

Testimony of Granta Y. Nakayama Assistant Administrator Office of Enforcement and Compliance Assurance

EPA Pesticide Factsheets

Testimony of Granta Nakayama, Assistant Administrator for Enforcement and Compliance Assurance before the House Committee on Energy and Commerce, Subcommittee on Environment and Hazardous Materials, October 4, 2007.

Security practices and regulatory compliance in the healthcare industry.

PubMed

Kwon, Juhee; Johnson, M Eric

2013-01-01

Securing protected health information is a critical responsibility of every healthcare organization. We explore information security practices and identify practice patterns that are associated with improved regulatory compliance. We employed Ward's cluster analysis using minimum variance based on the adoption of security practices. Variance between organizations was measured using dichotomous data indicating the presence or absence of each security practice. Using t tests, we identified the relationships between the clusters of security practices and their regulatory compliance. We utilized the results from the Kroll/Healthcare Information and Management Systems Society telephone-based survey of 250 US healthcare organizations including adoption status of security practices, breach incidents, and perceived compliance levels on Health Information Technology for Economic and Clinical Health, Health Insurance Portability and Accountability Act, Red Flags rules, Centers for Medicare and Medicaid Services, and state laws governing patient information security. Our analysis identified three clusters (which we call leaders, followers, and laggers) based on the variance of security practice patterns. The clusters have significant differences among non-technical practices rather than technical practices, and the highest level of compliance was associated with hospitals that employed a balanced approach between technical and non-technical practices (or between one-off and cultural practices). Hospitals in the highest level of compliance were significantly managing third parties' breaches and training. Audit practices were important to those who scored in the middle of the pack on compliance. Our results provide security practice benchmarks for healthcare administrators and can help policy makers in developing strategic and practical guidelines for practice adoption.

Security practices and regulatory compliance in the healthcare industry

PubMed Central

Kwon, Juhee; Johnson, M Eric

2013-01-01

Objective Securing protected health information is a critical responsibility of every healthcare organization. We explore information security practices and identify practice patterns that are associated with improved regulatory compliance. Design We employed Ward's cluster analysis using minimum variance based on the adoption of security practices. Variance between organizations was measured using dichotomous data indicating the presence or absence of each security practice. Using t tests, we identified the relationships between the clusters of security practices and their regulatory compliance. Measurement We utilized the results from the Kroll/Healthcare Information and Management Systems Society telephone-based survey of 250 US healthcare organizations including adoption status of security practices, breach incidents, and perceived compliance levels on Health Information Technology for Economic and Clinical Health, Health Insurance Portability and Accountability Act, Red Flags rules, Centers for Medicare and Medicaid Services, and state laws governing patient information security. Results Our analysis identified three clusters (which we call leaders, followers, and laggers) based on the variance of security practice patterns. The clusters have significant differences among non-technical practices rather than technical practices, and the highest level of compliance was associated with hospitals that employed a balanced approach between technical and non-technical practices (or between one-off and cultural practices). Conclusions Hospitals in the highest level of compliance were significantly managing third parties’ breaches and training. Audit practices were important to those who scored in the middle of the pack on compliance. Our results provide security practice benchmarks for healthcare administrators and can help policy makers in developing strategic and practical guidelines for practice adoption. PMID:22955497

Computational multiobjective topology optimization of silicon anode structures for lithium-ion batteries

NASA Astrophysics Data System (ADS)

Mitchell, Sarah L.; Ortiz, Michael

2016-09-01

This study utilizes computational topology optimization methods for the systematic design of optimal multifunctional silicon anode structures for lithium-ion batteries. In order to develop next generation high performance lithium-ion batteries, key design challenges relating to the silicon anode structure must be addressed, namely the lithiation-induced mechanical degradation and the low intrinsic electrical conductivity of silicon. As such this work considers two design objectives, the first being minimum compliance under design dependent volume expansion, and the second maximum electrical conduction through the structure, both of which are subject to a constraint on material volume. Density-based topology optimization methods are employed in conjunction with regularization techniques, a continuation scheme, and mathematical programming methods. The objectives are first considered individually, during which the influence of the minimum structural feature size and prescribed volume fraction are investigated. The methodology is subsequently extended to a bi-objective formulation to simultaneously address both the structural and conduction design criteria. The weighted sum method is used to derive the Pareto fronts, which demonstrate a clear trade-off between the competing design objectives. A rigid frame structure was found to be an excellent compromise between the structural and conduction design criteria, providing both the required structural rigidity and direct conduction pathways. The developments and results presented in this work provide a foundation for the informed design and development of silicon anode structures for high performance lithium-ion batteries.

System compliance dictates the effect of composite filler content on polymerization shrinkage stress.

PubMed

Wang, Zhengzhi; Chiang, Martin Y M

2016-04-01

The effect of filler content in dental restorative composites on the polymerization shrinkage stress (PS) is not straightforward and has caused much debate in the literature. Our objective in this study was to clarify the PS/filler content relationship based on analytical and experimental approaches, so that guidelines for materials comparison in terms of PS and clinical selection of dental composites with various filler content can be provided. Analytically, a simplified model based on linear elasticity was utilized to predict PS as a function of filler content under various compliances of the testing system, a cantilever beam-based instrument used in this study. The predictions were validated by measuring PS of composites synthesized using 50/50 mixtures of two common dimethacrylate resins with a variety of filler contents. Both experiments and predictions indicated that the influence of filler content on the PS highly depended on the compliance of the testing system. Within the clinic-relevant range of compliances and for the specific sample configuration tested, the PS increased with increasing filler content at low compliance of instrument, while increasing the compliance caused the effect of filler content on the PS to gradually diminish. Eventually, at high compliance, the PS inverted and decreased with increasing filler content. This compliance-dependent effect of filler content on PS suggests: (1) for materials comparison in terms of PS, the specific compliance at which the comparison being done should always be reported and (2) clinically, composites with relatively lower filler content could be selected for such cavities with relatively lower compliance (e.g. a Class-I cavity with thick tooth walls or the basal part in a cavity) and vice versa in order to reduce the final PS. Published by Elsevier Ltd.

34 CFR 366.63 - What evidence must a center present to demonstrate that it is in minimum compliance with the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... employees who are on unpaid family or maternity leave during this six-month period. (2) Self-help and self... relationships and peer role models. The center shall provide evidence in its most recent annual performance report that it promotes the development of peer relationships and peer role models among individuals with...

34 CFR 366.63 - What evidence must a center present to demonstrate that it is in minimum compliance with the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... employees who are on unpaid family or maternity leave during this six-month period. (2) Self-help and self... relationships and peer role models. The center shall provide evidence in its most recent annual performance report that it promotes the development of peer relationships and peer role models among individuals with...

34 CFR 366.63 - What evidence must a center present to demonstrate that it is in minimum compliance with the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... employees who are on unpaid family or maternity leave during this six-month period. (2) Self-help and self... relationships and peer role models. The center shall provide evidence in its most recent annual performance report that it promotes the development of peer relationships and peer role models among individuals with...

17 CFR Appendix B to Part 75 - Enhanced Minimum Standards for Compliance Programs

Code of Federal Regulations, 2014 CFR

2014-04-01

... documentation for market making-related activities conducted in reliance on § 75.4(b) and for hedging activity... activities; iii. The mission (i.e., the type of trading activity, such as market-making, trading in sovereign... market making-related activities under § 75.4 or risk-mitigating hedging activities under § 75.5 so that...

49 CFR 195.11 - What is a regulated rural gathering line and what requirements apply?

Code of Federal Regulations, 2013 CFR

2013-10-01

... established under § 195.406 corresponding to— (i) A stress level greater than 20-percent of the specified minimum yield strength of the line pipe; or (ii) If the stress level is unknown or the pipeline is not....410. (7) Establish a continuing public education program in compliance with § 195.440 before...

49 CFR 195.11 - What is a regulated rural gathering line and what requirements apply?

Code of Federal Regulations, 2014 CFR

2014-10-01

... established under § 195.406 corresponding to— (i) A stress level greater than 20-percent of the specified minimum yield strength of the line pipe; or (ii) If the stress level is unknown or the pipeline is not....410. (7) Establish a continuing public education program in compliance with § 195.440 before...

49 CFR 195.11 - What is a regulated rural gathering line and what requirements apply?

Code of Federal Regulations, 2012 CFR

2012-10-01

... established under § 195.406 corresponding to— (i) A stress level greater than 20-percent of the specified minimum yield strength of the line pipe; or (ii) If the stress level is unknown or the pipeline is not....410. (7) Establish a continuing public education program in compliance with § 195.440 before...

40 CFR Table 9 to Subpart Xxxx of... - Minimum Data for Continuous Compliance With the Emission Limits for Tire Production Affected Sources

Code of Federal Regulations, 2013 CFR

2013-07-01

... EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emissions Standards for Hazardous Air Pollutants: Rubber Tire Manufacturing Pt. 63, Subpt. XXXX, Table 9 Table 9 to... Method 311 (40 CFR part 60, appendix A), or approved alternative method, test results indicating the mass...

40 CFR Table 11 to Subpart Xxxx of... - Minimum Data for Continuous Compliance With the Emission Limits for Tire Cord Production Affected...

Code of Federal Regulations, 2011 CFR

2011-07-01

...) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emissions Standards... method, test results, indicating the mass percent of each HAP for coating used.b. The mass of each coating used each monthly operating period. c. The total mass of fabric processed each monthly operating...

40 CFR Table 9 to Subpart Xxxx of... - Minimum Data for Continuous Compliance With the Emission Limits for Tire Production Affected Sources

Code of Federal Regulations, 2011 CFR

2011-07-01

... EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emissions Standards for..., appendix A), or approved alternative method, test results indicating the mass percent of each HAP for each... mass percent of each HAP for each cement and solvent, as purchased.b. The mass of each cement and...

Extreme value theory applied to the definition of bathing water quality discounting limits.

PubMed

Haggarty, R A; Ferguson, C A; Scott, E M; Iroegbu, C; Stidson, R

2010-02-01

The European Community Bathing Water Directive (European Parliament, 2006) set compliance standards for bathing waters across Europe, with minimum standards for microbiological indicators to be attained at all locations by 2015. The Directive allows up to 15% of samples affected by short-term pollution episodes to be disregarded from the figures used to classify bathing waters, provided certain management criteria have been met, including informing the public of short-term water pollution episodes. Therefore, a scientifically justifiable discounting limit is required which could be used as a management tool to determine the samples that should be removed. This paper investigates different methods of obtaining discounting limits, focusing in particular on extreme value methodology applied to data from Scottish bathing waters. Return level based limits derived from threshold models applied at a site-specific level improved the percentage of sites which met at least the minimum required standard. This approach provides a method of obtaining limits which identify the samples that should be removed from compliance calculations, although care has to be taken in terms of the quantity of data which is removed. (c) 2009 Elsevier Ltd. All rights reserved.

Molecular Weight Effects on the Viscoelastic Response of a Polyimide

NASA Technical Reports Server (NTRS)

Nicholson, Lee M.; Whitley, Karen S.; Gates, Thomas S.

2000-01-01

The effect of molecular weight on the viscoelastic performance of an advanced polymer (LaRC -SI) was investigated through the use of creep compliance tests. Testing consisted of short-term isothermal creep and recovery with the creep segments performed under constant load. The tests were conducted at three temperatures below the glass transition temperature of each material with different molecular weight. Through the use of time-aging-time superposition procedures, the material constants, material master curves and aging-related parameters were evaluated at each temperature for a given molecular weight. The time-temperature superposition technique helped to describe the effect of temperature on the timescale of the viscoelastic response of each molecular weight. It was shown that the low molecular weight materials have increased creep compliance and creep compliance rate, and are more sensitive to temperature than the high molecular weight materials. Furthermore, a critical molecular weight transition was observed to occur at a weight-average molecular weight of approximately 25000 g/mol below which, the temperature sensitivity of the time-temperature superposition shift factor increases rapidly.

Analysing compliance of cigarette packaging with the FCTC and national legislation in eight former Soviet countries.

PubMed

Mir, Hassan; Roberts, Bayard; Richardson, Erica; Chow, Clara; McKee, Martin

2013-07-01

To analyse compliance of cigarette packets with the Framework Convention on Tobacco Control (FCTC) and national legislation and the policy actions that are required in eight former Soviet Union countries. We obtained cigarette packets of each of the 10 most smoked cigarette brands in Armenia, Azerbaijan, Belarus, Georgia, Kazakhstan, Moldova, Russia and Ukraine. The packets were then analysed using a standardised data collection instrument. The analysis included the placing, size and content of health warning labels and deceptive labels (eg, 'Lights'). Findings were assessed for compliance with the FCTC and national legislation. Health warnings were on all packets from all countries and met the FCTC minimum recommendations on size and position except Azerbaijan and Georgia. All countries used a variety of warnings except Azerbaijan. No country had pictorial health warnings, despite them being mandatory in Georgia and Moldova. All of the countries had deceptive labels despite being banned in all countries except Russia and Azerbaijan where still no such legislation exists. Despite progress in the use of health warning messages, gaps still remain-particularly with the use of deceptive labels. Stronger surveillance and enforcement mechanisms are required to improve compliance with the FCTC and national legislation.

Experimental investigations of the minimum ignition energy and the minimum ignition temperature of inert and combustible dust cloud mixtures.

PubMed

Addai, Emmanuel Kwasi; Gabel, Dieter; Krause, Ulrich

2016-04-15

The risks associated with dust explosions still exist in industries that either process or handle combustible dust. This explosion risk could be prevented or mitigated by applying the principle of inherent safety (moderation). This is achieved by adding an inert material to a highly combustible material in order to decrease the ignition sensitivity of the combustible dust. The presented paper deals with the experimental investigation of the influence of adding an inert dust on the minimum ignition energy and the minimum ignition temperature of the combustible/inert dust mixtures. The experimental investigation was done in two laboratory scale equipment: the Hartmann apparatus and the Godbert-Greenwald furnace for the minimum ignition energy and the minimum ignition temperature test respectively. This was achieved by mixing various amounts of three inert materials (magnesium oxide, ammonium sulphate and sand) and six combustible dusts (brown coal, lycopodium, toner, niacin, corn starch and high density polyethylene). Generally, increasing the inert materials concentration increases the minimum ignition energy as well as the minimum ignition temperatures until a threshold is reached where no ignition was obtained. The permissible range for the inert mixture to minimize the ignition risk lies between 60 to 80%. Copyright © 2016 Elsevier B.V. All rights reserved.

Compliance With a Comprehensive Antibiotic Protocol Improves Infection Incidence in Pediatric Spine Surgery.

PubMed

Vandenberg, Curt; Niswander, Cameron; Carry, Patrick; Bloch, Nikki; Pan, Zhaoxing; Erickson, Mark; Garg, Sumeet

A multidisciplinary task force, designated Target Zero, has developed protocols for prevention of surgical site infection (SSI) for spine surgery at our institution. The purpose of this study was to evaluate how compliance with an antibiotic bundle impacts infection incidences in pediatric spine surgery. After institutional review board approval, a consecutive series of 511 patients (517 procedures) who underwent primary spine procedures from 2008 to 2012 were retrospectively reviewed to identify patients who developed SSI. Patients were followed for a minimum of 90 days postoperatively. Compliance data were collected prospectively in 511 consecutive patients and a total of 517 procedures. Three criteria were required for antibiotic bundle compliance: appropriate antibiotics completely administered within 1 hour before incision, antibiotics appropriately redosed intraoperatively for blood loss and time, and antibiotics discontinued within 24 hours postoperatively. A multivariable logistic regression analysis was used to test the association between compliance and the development of an infection. Overall antibiotic bundle compliance rate was 85%. After adjusting for risk category, estimated blood loss, and study year, the likelihood of an infection was increased in the noncompliant group compared with the compliant group (adjusted odds ratio: 3.0, 95% CI, 0.96-9.47, P=0.0587). When expressed as the number needed to treat, strict adherence to antibiotic bundle compliance prevented 1 SSI within 90 days of surgery for every 26 patients treated with the antibiotic bundle. Reasons for noncompliance included failure to infuse preoperative antibiotics 1 hour before incision (10.3%), failure to redose antibiotics intraoperatively based on time or blood loss (5.5%), and failure to discontinue antibiotics within 24 hours postoperatively (1.9%). Compliance with a comprehensive antibiotic protocol can lead to meaningful reductions in SSI incidences in pediatric spine surgery. Institutions should focus on improving compliance with prophylactic antibiotic protocols to decrease SSI in pediatric spine surgery. Level III-retrospective cohort study.

Restricting marketing to children: consensus on policy interventions to address obesity.

PubMed

Raine, Kim D; Lobstein, Tim; Landon, Jane; Kent, Monique Potvin; Pellerin, Suzie; Caulfield, Timothy; Finegood, Diane; Mongeau, Lyne; Neary, Neil; Spence, John C

2013-05-01

Obesity presents major challenges for public health and the evidence is strong. Lessons from tobacco control indicate a need for changing the policy and environments to make healthy choices easier and to create more opportunities for children to achieve healthy weights. In April 2011, the Alberta Policy Coalition for Chronic Disease Prevention convened a consensus conference on environmental determinants of obesity such as marketing of unhealthy foods and beverages to children. We examine the political environment, evidence, issues, and challenges of placing restrictions on marketing of unhealthy foods and beverages within Canada. We recommend a national regulatory system prohibiting commercial marketing of foods and beverages to children and suggest that effective regulations must set minimum standards, monitor compliance, and enact penalties for non-compliance.

Introducing automated hand hygiene surveillance to an Australian hospital: Mirroring the HOW2 Benchmark Study.

PubMed

Azim, Syed; Juergens, Craig; Hines, John; McLaws, Mary-Louise

2016-07-01

Human auditing and collating hand hygiene compliance data take hundreds of hours. We report on 24/7 overt observations to establish adjusted average daily hand hygiene opportunities (HHOs) used as the denominator in an automated surveillance that reports daily compliance rates. Overt 24/7 automated surveillance collected HHOs in medical and surgical wards. Accredited auditors observed health care workers' interaction between patient and patient zones to collect the total number of HHOs, indications, and compliance and noncompliance. Automated surveillance captured compliance (ie, events) via low power radio connected to alcohol-based handrub (ABHR) dispensers. Events were divided by HHOs, adjusted for daily patient-to-nurse ratio, to establish daily rates. Human auditors collected 21,450 HHOs during 24/7 with 1,532 average unadjusted HHOs per day. This was 4.4 times larger than the minimum ward sample required for accreditation. The average adjusted HHOs for ABHR alone on the medical ward was 63 HHOs per patient day and 40 HHOs per patient day on the surgical ward. From July 1, 2014-July 31, 2015 the automated surveillance system collected 889,968 events. Automated surveillance collects 4 times the amount of data on each ward per day than a human auditor usually collects for a quarterly compliance report. Crown Copyright © 2016. Published by Elsevier Inc. All rights reserved.

Additional mailing phase for FIT after a medical offer phase: The best way to improve compliance with colorectal cancer screening in France.

PubMed

Piette, Christine; Durand, Gérard; Bretagne, Jean-François; Faivre, Jean

2017-03-01

Compliance with colorectal cancer screening is critical to its effectiveness. The organisation of the mass screening programme in France has recently been modified with no evaluation of the consequences. To evaluate the impact of the way the screening test is delivered on compliance. During the first six months of the screening campaign (Ille-Vilaine, Brittany), general practitioners were asked to propose a faecal immunochemical test (FIT), OC-Sensor, to individuals at average risk for colorectal cancer (n=152,097). A subset of non-participants in the medical phase (n=13,071) was randomly chosen to receive a reminder that included the screening test or a simple postal reminder without the screening test. Compliance was 31% if the screening test was proposed during a medical consultation. In non-participants during the medical phase, it was 45% in those receiving both a reminder and the screening test and 28% amongst those receiving a simple reminder. An estimated overall participation rate of 54% can be expected if non-participants in the medical phase are sent a reminder together with the screening test. In France, a compliance rate above the minimum uptake rate of 45% recommended by European Union experts can be achieved if the FIT is mailed to non-participants after the medical free-offer phase. Copyright © 2016. Published by Elsevier Ltd.

Measurement of fracture toughness by nanoindentation methods: Recent advances and future challenges

DOE PAGES

Sebastiani, Marco; Johanns, K. E.; Herbert, Erik G.; ...

2015-04-30

In this study, we describe recent advances and developments for the measurement of fracture toughness at small scales by the use of nanoindentation-based methods including techniques based on micro-cantilever beam bending and micro-pillar splitting. A critical comparison of the techniques is made by testing a selected group of bulk and thin film materials. For pillar splitting, cohesive zone finite element simulations are used to validate a simple relationship between the critical load at failure, the pillar radius, and the fracture toughness for a range of material properties and coating/substrate combinations. The minimum pillar diameter required for nucleation and growth ofmore » a crack during indentation is also estimated. An analysis of pillar splitting for a film on a dissimilar substrate material shows that the critical load for splitting is relatively insensitive to the substrate compliance for a large range of material properties. Experimental results from a selected group of materials show good agreement between single cantilever and pillar splitting methods, while a discrepancy of ~25% is found between the pillar splitting technique and double-cantilever testing. It is concluded that both the micro-cantilever and pillar splitting techniques are valuable methods for micro-scale assessment of fracture toughness of brittle ceramics, provided the underlying assumptions can be validated. Although the pillar splitting method has some advantages because of the simplicity of sample preparation and testing, it is not applicable to most metals because their higher toughness prevents splitting, and in this case, micro-cantilever bend testing is preferred.« less

75 FR 44841 - Hazardous Materials: Special Permits and Approvals-Minimum Level of Fitness Determinations...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-29

... Materials: Special Permits and Approvals--Minimum Level of Fitness Determinations; Public Meeting AGENCY... Special Permit and Approval applicant fitness determinations. PHMSA will hold a public meeting on August... minimum level of fitness. DATES: Public Meeting: August 19, 2010; starting at 9:30 a.m. and ending by 3:30...

Assessment of pulmonary arterial compliance evaluated using harmonic oscillator kinematics

PubMed Central

Hayabuchi, Yasunobu; Ono, Akemi; Homma, Yukako; Kagami, Shoji

2017-01-01

We hypothesized that KPA, a harmonic oscillator kinematics-derived spring constant parameter of the pulmonary artery pressure (PAP) profile, reflects PA compliance in pediatric patients. In this prospective study of 33 children (age range = 0.5–20 years) with various cardiac diseases, we assessed the novel parameter designated as KPA calculated using the pressure phase plane and the equation KPA = (dP/dt_max)2/([Pmax – Pmin])/2)2, where dP/dt_max is the peak derivative of PAP, and Pmax – Pmin is the difference between the minimum and maximum PAP. PA compliance was also calculated using two conventional methods: systolic PA compliance (sPAC) was expressed as the stroke volume/Pmax – Pmin; and diastolic PA compliance (dPAC) was determined according to a two-element Windkessel model of PA diastolic pressure decay. In addition, data were recorded during abdominal compression to determine the influence of preload on KPA. A significant correlation was observed between KPA and sPAC (r = 0.52, P = 0.0018), but not dPAC. Significant correlations were also seen with the time constant (τ) of diastolic PAP (r = −0.51, P = 0.0026) and the pulmonary vascular resistance index (r = −0.39, P = 0.0242). No significant difference in KPA was seen between before and after abdominal compression. KPA had a higher intraclass correlation coefficient than other compliance and resistance parameters for both intra-observer and inter-observer variability (0.998 and 0.997, respectively). These results suggest that KPA can provide insight into the underlying mechanisms and facilitate the quantification of PA compliance. PMID:28621582

Assessment of pulmonary arterial compliance evaluated using harmonic oscillator kinematics.

PubMed

Hayabuchi, Yasunobu; Ono, Akemi; Homma, Yukako; Kagami, Shoji

2017-01-01

We hypothesized that K PA , a harmonic oscillator kinematics-derived spring constant parameter of the pulmonary artery pressure (PAP) profile, reflects PA compliance in pediatric patients. In this prospective study of 33 children (age range = 0.5-20 years) with various cardiac diseases, we assessed the novel parameter designated as K PA calculated using the pressure phase plane and the equation K PA  = (dP/dt_max) 2 /([Pmax - Pmin])/2) 2 , where dP/dt_max is the peak derivative of PAP, and Pmax - Pmin is the difference between the minimum and maximum PAP. PA compliance was also calculated using two conventional methods: systolic PA compliance (sPAC) was expressed as the stroke volume/Pmax - Pmin; and diastolic PA compliance (dPAC) was determined according to a two-element Windkessel model of PA diastolic pressure decay. In addition, data were recorded during abdominal compression to determine the influence of preload on K PA . A significant correlation was observed between K PA and sPAC (r = 0.52, P = 0.0018), but not dPAC. Significant correlations were also seen with the time constant (τ) of diastolic PAP (r = -0.51, P = 0.0026) and the pulmonary vascular resistance index (r = -0.39, P = 0.0242). No significant difference in K PA was seen between before and after abdominal compression. K PA had a higher intraclass correlation coefficient than other compliance and resistance parameters for both intra-observer and inter-observer variability (0.998 and 0.997, respectively). These results suggest that K PA can provide insight into the underlying mechanisms and facilitate the quantification of PA compliance.

Cardiopulmonary Resuscitation in Lunar and Martian Gravity Fields

NASA Technical Reports Server (NTRS)

Sarkar, Subhajit

2004-01-01

Cardiopulmonary resuscitation is required training for all astronauts. No studies thus far have investigated how chest compressions may be affected in lunar and Martian gravities. Therefore a theoretical quantitative study was performed. The maximum downward force an unrestrained person can apply is mg N (g(sub Earth) = 9.78 ms(sup -2), g(sub moon) = 1.63 ms(sup -2), g(sub Mars) = 3.69 ms(sup -2). Tsitlik et a1 (Critical Care Medicine, 1983) described the human sternal elastic force-displacement relationship (compliance) by: F = betaD(sub s) + gammaD(sub s)(sup 2) (beta = 54.9 plus or minus 29.4 Ncm(sup -1) and gamma = 10.8 plus or minus 4.1 Ncm(sup -2)). Maximum forces in the 3 gravitational fields produced by 76 kg (US population mean), 41 kg and 93 kg (masses derived from the limits for astronaut height), produced solutions for compression depth using Tsitlik equations for chests of: mean compliance (beta = 54.9, gamma = 10.8), low compliance (beta = 84.3, gamma = 14.9) and high compliance (beta = 25.5, gamma = 6.7). The mass for minimum adequate adult compression, 3.8 cm (AHA guidelines), was also calculated. 76 kg compresses the mean compliance chest by: Earth, 6.1 cm, Mars, 3.2 cm, Moon, 1.7 cm. In lunar gravity, the high compliance chest is compressed only 3.2 cm by 93 kg, 120 kg being required for 3.8 cm. In Martian gravity, on the mean chest, 93 kg compresses 3.6 cm; 99 kg is required for 3.8 cm. On Mars, the high compliance chest is compressed 4.8 cm with 76 kg, 5.5 cm with 93 kg, with 52 kg required for 3.8 cm.

The European system for the control of the safety of food-contact materials needs restructuring: a review and outlook for discussion.

PubMed

Grob, Koni

2017-09-01

The present European system to assure the safety of migrates from food-contact materials (FCMs) needs improvement. It is proposed to implement better the self-control by the producers through improved official control and more attractive listing of approved substances and materials (the latter being subject of another discussion paper). The initial concept of a positive list for the substances used, a limit for the overall migration and regulation of compliance testing was recognised as insufficient long ago, as it does not properly cover reaction products (including oligomers) and impurities. It also turned out to be unrealistic to cover all 17 types of FCMs owing to lack of resources by the authorities. Therefore, European Union legislation shifted the focus to the compliance work carried out by the business operators (in-house documentation and declaration of compliance). However, this approach has not been properly implemented. This is partly due to lack or unsuccessful control by authorities. A suitable structure of this control still needs to be built. It is proposed that specialised document-collection centres working with dedicated tools harmonised throughout Europe be created. Further, since most migrating substances are not listed, the toxicological evaluation reported by industry must be checked by risk-assessment authorities. Finally, effective and harmonised measures are needed to react in case of non-compliance. The currently large gap between the legal requirements and reality must be bridged by introducing flexibility: authorised work plans by industry are proposed. It is also proposed to encourage certified private institutes to approve compliance work, driven by the attractive listing of approved materials and exploiting market forces. In the long run, the focus of the authorities might change from evaluating the substances used and regulating migration testing to the evaluation of the compliance work performed by industry, which means moving from legislation supporting industry towards checking self-control.

40 CFR Table 13 to Subpart Xxxx of... - Minimum Data for Continuous Compliance With the Emission Limitations for Puncture Sealant...

Code of Federal Regulations, 2010 CFR

2010-07-01

... do not exceed the operating limits in Table 4 to this subpart Records of the total regeneration stream mass or volumetric flow for each regeneration cycle for 100 percent of the hours during which the process was operated, and a record of the carbon bed temperature after each regeneration, and within 15...

40 CFR Table 13 to Subpart Xxxx of... - Minimum Data for Continuous Compliance With the Emission Limitations for Puncture Sealant...

Code of Federal Regulations, 2011 CFR

2011-07-01

... do not exceed the operating limits in Table 4 to this subpart Records of the total regeneration stream mass or volumetric flow for each regeneration cycle for 100 percent of the hours during which the process was operated, and a record of the carbon bed temperature after each regeneration, and within 15...

13 CFR 120.425 - What are the minimum elements that SBA will require before consenting to a securitization?

Code of Federal Regulations, 2010 CFR

2010-01-01

... the accuracy of the data used to make the Currency Rate calculation. [64 FR 6508, Feb. 10, 1999, as... compliance with this section if it meets the definition of “well capitalized” used by its bank regulator. SBA... used to make the Loss Rate calculation. (c) PLP Privilege Suspension. (1) Suspension: If a securitizer...

34 CFR 379.53 - What are the minimum performance levels for each compliance indicator?

Code of Federal Regulations, 2010 CFR

2010-07-01

... employment as follows: (i) No less than 50 percent during fiscal year (FY) 2001. (ii) No less than 51 percent during FY 2002. (iii) No less than 52 percent during FY 2003. (iv) No less than 54 percent during FY 2004. (v) No less than 55 percent during FY 2005 and any year thereafter. (2) Change in earnings. (i...

34 CFR 366.23 - What grants must be made to existing eligible agencies?

Code of Federal Regulations, 2012 CFR

2012-07-01

... subparts F and G of this part. (The indicators of minimum compliance in subpart G of this part are used to..., if it was awarded a grant on or before that date, i.e., during FY 1993. (Approved by the Office of Management and Budget under control number 1820-0018) (Authority: 29 U.S.C. 796f-1(c)) ...

34 CFR 366.23 - What grants must be made to existing eligible agencies?

Code of Federal Regulations, 2010 CFR

2010-07-01

... subparts F and G of this part. (The indicators of minimum compliance in subpart G of this part are used to..., if it was awarded a grant on or before that date, i.e., during FY 1993. (Approved by the Office of Management and Budget under control number 1820-0018) (Authority: 29 U.S.C. 796f-1(c)) ...

34 CFR 366.23 - What grants must be made to existing eligible agencies?

Code of Federal Regulations, 2011 CFR

2011-07-01

... subparts F and G of this part. (The indicators of minimum compliance in subpart G of this part are used to..., if it was awarded a grant on or before that date, i.e., during FY 1993. (Approved by the Office of Management and Budget under control number 1820-0018) (Authority: 29 U.S.C. 796f-1(c)) ...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Evans, J.H.; Chipley, K.K.; Nelms, H.A.

An evaluation of the ORNL loop transport cask demonstrating its compliance with the regulations governing the transportation of radioactive and fissile materials is presented. A previous review of the cask is updated to demonstrate compliance with current regulations, to present current procedures, and to reflect the more recent technology.

40 CFR 63.8802 - What methods must I use to demonstrate compliance with the emission limitation for loop slitter...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Hazardous Air Pollutants: Flexible Polyurethane Foam Fabrication Operations Testing and Initial Compliance... for each material used in your foam fabrication operations, you must use one of the options in...

40 CFR 63.8802 - What methods must I use to demonstrate compliance with the emission limitation for loop slitter...

Code of Federal Regulations, 2013 CFR

2013-07-01

... Hazardous Air Pollutants: Flexible Polyurethane Foam Fabrication Operations Testing and Initial Compliance... for each material used in your foam fabrication operations, you must use one of the options in...

40 CFR 63.8802 - What methods must I use to demonstrate compliance with the emission limitation for loop slitter...

Code of Federal Regulations, 2011 CFR

2011-07-01

... Hazardous Air Pollutants: Flexible Polyurethane Foam Fabrication Operations Testing and Initial Compliance... for each material used in your foam fabrication operations, you must use one of the options in...

40 CFR 63.8802 - What methods must I use to demonstrate compliance with the emission limitation for loop slitter...

Code of Federal Regulations, 2012 CFR

2012-07-01

... Hazardous Air Pollutants: Flexible Polyurethane Foam Fabrication Operations Testing and Initial Compliance... for each material used in your foam fabrication operations, you must use one of the options in...

40 CFR 63.8802 - What methods must I use to demonstrate compliance with the emission limitation for loop slitter...

Code of Federal Regulations, 2014 CFR

2014-07-01

... Hazardous Air Pollutants: Flexible Polyurethane Foam Fabrication Operations Testing and Initial Compliance... for each material used in your foam fabrication operations, you must use one of the options in...

Materials risk analysis.

DOT National Transportation Integrated Search

2010-02-01

State highway authorities routinely examine the quality of the materials used to build highway construction projects. Some : materials are tested, some are accepted through a manufacturers certification of quality or compliance, some are physicall...

Multidisciplinary tailoring of hot composite structures

NASA Technical Reports Server (NTRS)

Singhal, Surendra N.; Chamis, Christos C.

1993-01-01

A computational simulation procedure is described for multidisciplinary analysis and tailoring of layered multi-material hot composite engine structural components subjected to simultaneous multiple discipline-specific thermal, structural, vibration, and acoustic loads. The effect of aggressive environments is also simulated. The simulation is based on a three-dimensional finite element analysis technique in conjunction with structural mechanics codes, thermal/acoustic analysis methods, and tailoring procedures. The integrated multidisciplinary simulation procedure is general-purpose including the coupled effects of nonlinearities in structure geometry, material, loading, and environmental complexities. The composite material behavior is assessed at all composite scales, i.e., laminate/ply/constituents (fiber/matrix), via a nonlinear material characterization hygro-thermo-mechanical model. Sample tailoring cases exhibiting nonlinear material/loading/environmental behavior of aircraft engine fan blades, are presented. The various multidisciplinary loads lead to different tailored designs, even those competing with each other, as in the case of minimum material cost versus minimum structure weight and in the case of minimum vibration frequency versus minimum acoustic noise.

The effects of stress and physical aging on the creep compliance of a polymeric composite

NASA Technical Reports Server (NTRS)

Gates, Thomas E.; Feldman, Mark

1993-01-01

An experimental study was performed to determine the effects of stress and physical aging on the matrix dominated viscoelastic properties of IM7/8320, a high temperature fiber reinforced thermoplastic composite. Established creep/aging test techniques developed for polymers were adapted for testing of the composite material. The transverse and shear compliance for an orthotropic plate were found from creep compliance measurements at constant, sub-Tg temperatures. These compliance terms were shown to be effected by physical aging. Aging time shift factors and shift rates were found to be a function of applied stress.

Interconversion of dynamic modulus to creep compliance and relaxation modulus : numerical modeling and laboratory validation - final report.

DOT National Transportation Integrated Search

2016-09-01

Viscoelastic material functions such as time domain functions, such as, relaxation modulus and creep compliance, : or frequency domain function, such as, complex modulus can be used to characterize the linear viscoelastic behavior : of asphalt concre...

40 CFR 63.706 - Recordkeeping requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... affected source that is complying with § 63.703(c) by performing a material balance in accordance with § 63...) through the use of a nonregenerative carbon adsorber and demonstrating initial compliance in accordance... carbon replacement time established as the site-specific operating parameter to demonstrate compliance...

40 CFR 63.706 - Recordkeeping requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... affected source that is complying with § 63.703(c) by performing a material balance in accordance with § 63...) through the use of a nonregenerative carbon adsorber and demonstrating initial compliance in accordance... carbon replacement time established as the site-specific operating parameter to demonstrate compliance...

40 CFR 63.706 - Recordkeeping requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... affected source that is complying with § 63.703(c) by performing a material balance in accordance with § 63...) through the use of a nonregenerative carbon adsorber and demonstrating initial compliance in accordance... carbon replacement time established as the site-specific operating parameter to demonstrate compliance...

40 CFR 63.706 - Recordkeeping requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... affected source that is complying with § 63.703(c) by performing a material balance in accordance with § 63...) through the use of a nonregenerative carbon adsorber and demonstrating initial compliance in accordance... carbon replacement time established as the site-specific operating parameter to demonstrate compliance...

40 CFR 63.706 - Recordkeeping requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... affected source that is complying with § 63.703(c) by performing a material balance in accordance with § 63...) through the use of a nonregenerative carbon adsorber and demonstrating initial compliance in accordance... carbon replacement time established as the site-specific operating parameter to demonstrate compliance...

77 FR 19412 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-30

... of compliance from certain requirements of its safety standards. The individual petition is described... Hazardous Materials Regulations (49 CFR part 172) to operate in a single-unit train consist. Farmrail... delivery to the different logistics customers. Additionally, Farmrail states that a rail shipper in Sayre...

28 CFR 55.16 - Standards and proof of compliance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Standards and proof of compliance. 55.16 Section 55.16 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) IMPLEMENTATION OF THE PROVISIONS OF THE VOTING RIGHTS ACT REGARDING LANGUAGE MINORITY GROUPS Minority Language Materials and...

28 CFR 55.16 - Standards and proof of compliance.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 28 Judicial Administration 2 2011-07-01 2011-07-01 false Standards and proof of compliance. 55.16 Section 55.16 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) IMPLEMENTATION OF THE PROVISIONS OF THE VOTING RIGHTS ACT REGARDING LANGUAGE MINORITY GROUPS Minority Language Materials and...

Engineering a clinically-useful matrix for cell therapy.

PubMed

Prestwich, Glenn D

2008-01-01

The design criteria for matrices for encapsulation of cells for cell therapy include chemical, biological, engineering, marketing, regulatory, and financial constraints. What is required is a biocompatible material for culture of cells in three-dimensions (3-D) that offers ease of use, experimental flexibility to alter composition and compliance, and a composition that would permit a seamless transition from in vitro to in vivo use. The challenge is to replicate the complexity of the native extracellular matrix (ECM) environment with the minimum number of components necessary to allow cells to rebuild a given tissue. Our approach is to deconstruct the ECM to a few modular components that can be reassembled into biomimetic materials that meet these criteria. These semi-synthetic ECMs (sECMs) employ thiol-modified derivatives of hyaluronic acid (HA) that can form covalently crosslinked, biodegradable hydrogels. These sECMs are "living" biopolymers, meaning that they can be crosslinked in the presence of cells or tissues to enable cell therapy and tissue engineering. Moreover, the sECMs allow inclusion of the appropriate biological cues needed to simulate the complexity of the ECM of a given tissue. Taken together, the sECM technology offers a manufacturable, highly reproducible, flexible, FDA-approvable, and affordable vehicle for cell expansion and differentiation in 3-D.

Restricting marketing to children: Consensus on policy interventions to address obesity

PubMed Central

Raine, Kim D; Lobstein, Tim; Landon, Jane; Kent, Monique Potvin; Pellerin, Suzie; Caulfield, Timothy; Finegood, Diane; Mongeau, Lyne; Neary, Neil; Spence, John C

2013-01-01

Obesity presents major challenges for public health and the evidence is strong. Lessons from tobacco control indicate a need for changing the policy and environments to make healthy choices easier and to create more opportunities for children to achieve healthy weights. In April 2011, the Alberta Policy Coalition for Chronic Disease Prevention convened a consensus conference on environmental determinants of obesity such as marketing of unhealthy foods and beverages to children. We examine the political environment, evidence, issues, and challenges of placing restrictions on marketing of unhealthy foods and beverages within Canada. We recommend a national regulatory system prohibiting commercial marketing of foods and beverages to children and suggest that effective regulations must set minimum standards, monitor compliance, and enact penalties for non-compliance. PMID:23447026

76 FR 4276 - Hazardous Materials: Improving the Safety of Railroad Transportation of Hazardous Materials

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-25

...-0004] Hazardous Materials: Improving the Safety of Railroad Transportation of Hazardous Materials... hazardous materials program. DATES: The public meeting will be held on Tuesday, February 22, 2011, starting...--Hazardous Materials, FRA Office of Safety Assurance and Compliance, at least 4 business days before the date...

Approximate minimum-time trajectories for 2-link flexible manipulators

NASA Technical Reports Server (NTRS)

Eisler, G. R.; Segalman, D. J.; Robinett, R. D.

1989-01-01

Powell's nonlinear programming code, VF02AD, was used to generate approximate minimum-time tip trajectories for 2-link semi-rigid and flexible manipulator movements in the horizontal plane. The manipulator is modeled with an efficient finite-element scheme for an n-link, m-joint system with horizontal-plane bending only. Constraints on the trajectory include boundary conditions on position and energy for a rest-to-rest maneuver, straight-line tracking between boundary positions, and motor torque limits. Trajectory comparisons utilize a change in the link stiffness, EI, to transition from the semi-rigid to flexible case. Results show the level of compliance necessary to excite significant modal behavior. Quiescence of the final configuration is examined with the finite-element model.

It's in Your Hands: An Educational Initiative to Improve Parent/Family Hand Hygiene Compliance.

PubMed

Chandonnet, Celeste J; Boutwell, Kristan M; Spigel, Nadine; Carter, Judith; DeGrazia, Michele; Ozonoff, Al; Flaherty, Kathleen

Health care-associated infections contribute to increased morbidity and mortality, increased resource use, higher costs, and extended hospitalizations. Proper hand hygiene (HH) is essential to health care-associated infection prevention. Low compliance among parents in our neonatal intensive care unit (NICU) was identified and prompted development of an HH initiative. The objective of this quality improvement project was to improve parent HH practices with the ultimate goal of achieving 100% compliance with parent HH. Between December 2011 and November 2014, our NICU Infection Prevention Committee developed and implemented the parent/family HH initiative entitled "It's in Your Hands" and created learning materials based on the World Health Organization and Centers for Disease Control and Prevention recommendations. Materials included information sheets, posters, stickers, and checklists. Audits, based on the World Health Organization's Five Moments for Hand Hygiene, were performed several times per week to monitor compliance. Before the intervention, only 71% (n = 1143) of all observed parents and family members performed proper HH. After the intervention, proper HH increased to 89% (n = 939). An average compliance of 89% was maintained throughout the intervention phase. This initiative led to sustained improvements in HH compliance among NICU parents. It has empowered parents to speak up and request proper HH from health care providers when interacting with their child. This initiative has been adopted as a hospital-wide standard of care.

29 CFR 1921.7 - Stipulations of compliance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... WORKERS' COMPENSATION ACT Prehearing Procedures § 1921.7 Stipulations of compliance. At any time prior to... admits the material facts and agrees to discontinue the acts or practices which are intended to be set up...

40 CFR 63.3151 - How do I demonstrate initial compliance with the emission limitations?

Code of Federal Regulations, 2014 CFR

2014-07-01

... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants... separately calculate the mass average organic HAP content of the materials used during the initial compliance...

40 CFR 63.3151 - How do I demonstrate initial compliance with the emission limitations?

Code of Federal Regulations, 2013 CFR

2013-07-01

... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants... separately calculate the mass average organic HAP content of the materials used during the initial compliance...

Reuse of Material Containing Natural Radionuclides - 12444

DOE Office of Scientific and Technical Information (OSTI.GOV)

Metlyaev, E.G.; Novikova, N.J.

2012-07-01

Disposal of and use of wastes containing natural radioactive material (NORM) or technologically enhanced natural radioactive material (TENORM) with excessive natural background as a building material is very important in the supervision body activity. At the present time, the residents of Octyabrsky village are under resettlement. This village is located just near the Priargunsky mining and chemical combine (Ltd. 'PPGHO'), one of the oldest uranium mines in our country. The vacated wooden houses in the village are demolished and partly used as a building material. To address the issue of potential radiation hazard of the wooden beams originating from demolitionmore » of houses in Octyabrsky village, the contents of the natural radionuclides (K-40, Th-232, Ra-226, U- 238) are being determined in samples of the wooden beams of houses. The NORM contents in the wooden house samples are higher, on average, than their content in the reference sample of the fresh wood shavings, but the range of values is rather large. According to the classification of waste containing the natural radionuclides, its evaluation is based on the effective specific activity. At the effective specific activity lower 1.5 kBq/kg and gamma dose rate lower 70 μR/h, the material is not considered as waste and can be used in building by 1 - 3 classes depending upon A{sub eff} value. At 1.5 kBq/kg < A{sub eff} ≤ 4 kBq/kg (4 class), the wooden beams might be used for the purpose of the industrial building, if sum of ratios between the radionuclide specific activity and its specific activity of minimum significance is lower than unit. The material classified as the waste containing the natural radionuclides has A{sub eff} higher 1.5 kBq /kg, and its usage for the purpose of house-building and road construction is forbidden. As for the ash classification and its future usage, such usage is unreasonable, because, according to the provided material, more than 50% of ash samples are considered as radioactive waste containing natural radionuclides. All materials originated from demolition of houses in Octyabrsky village are subjected to the obligatory radiation control. The decision to use the wooden beams shall enter into force after agreement with the State Sanitary and Epidemiological Supervision bodies. Conclusions: 1 - The wooden beam originated from the house demolition in Octyabrsky village might be used as the construction material only in case of compliance with the requirements of the regulatory documents, as well as under approval of the authorities responsible for the state sanitary and epidemiological supervision in this area. 2 - The industrial control is introduced to verify the compliance with the current regulations. 3 - The material originated from the house demolition might be used only if such usage does not cause increasing radiation exposure to the public. (authors)« less

Topology and layout optimization of discrete and continuum structures

NASA Technical Reports Server (NTRS)

Bendsoe, Martin P.; Kikuchi, Noboru

1993-01-01

The basic features of the ground structure method for truss structure an continuum problems are described. Problems with a large number of potential structural elements are considered using the compliance of the structure as the objective function. The design problem is the minimization of compliance for a given structural weight, and the design variables for truss problems are the cross-sectional areas of the individual truss members, while for continuum problems they are the variable densities of material in each of the elements of the FEM discretization. It is shown how homogenization theory can be applied to provide a relation between material density and the effective material properties of a periodic medium with a known microstructure of material and voids.

High Tensile Strength Amalgams for In-Space Fabrication and Repair

NASA Technical Reports Server (NTRS)

Grugel, Richard N.

2006-01-01

Amalgams are well known for their use in dental practice as a tooth filling material. They have a number of useful attributes that include room temperature fabrication, corrosion resistance, dimensional stability, and very good compressive strength. These properties well serve dental needs but, unfortunately, amalgams have extremely poor tensile strength, a feature that severely limits other potential applications. Improved material properties (strength and temperature) of amalgams may have application to the freeform fabrication of repairs or parts that might be necessary during an extended space mission. Advantages would include, but are not limited to: the ability to produce complex parts, a minimum number of processing steps, minimum crew interaction, high yield - minimum wasted material, reduced gravity compatibility, minimum final finishing, safety, and minimum power consumption. The work presented here shows how the properties of amalgams can be improved by changing particle geometries in conjunction with novel engineering metals.

Dynamic fracture toughness of ASME SA508 Class 2a ASME SA533 grade A Class 2 base and heat affected zone material and applicable weld metals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Logsdon, W.A.; Begley, J.A.; Gottshall, C.L.

1978-03-01

The ASME Boiler and Pressure Vessel Code, Section III, Article G-2000, requires that dynamic fracture toughness data be developed for materials with specified minimum yield strengths greater than 50 ksi to provide verification and utilization of the ASME specified minimum reference toughness K/sub IR/ curve. In order to qualify ASME SA508 Class 2a and ASME SA533 Grade A Class 2 pressure vessel steels (minimum yield strengths equal 65 kip/in./sup 2/ and 70 kip/in./sup 2/, respectively) per this requirement, dynamic fracture toughness tests were performed on these materials. All dynamic fracture toughness values of SA508 Class 2a base and HAZ material,more » SA533 Grade A Class 2 base and HAZ material, and applicable weld metals exceeded the ASME specified minimum reference toughness K/sub IR/ curve.« less

78 FR 9845 - Minimum and Ordinary Maximum and Aggravated Maximum Civil Monetary Penalties for a Violation of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-12

... Penalties for a Violation of the Hazardous Materials Transportation Laws or Regulations, Orders, Special... final rule applies to all violations of the Federal hazardous materials transportation laws or a... Hazardous Materials Transportation Safety Improvement Act of 2012-revises the maximum and minimum civil...

Mobile Pit verification system design based on passive special nuclear material verification in weapons storage facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paul, J. N.; Chin, M. R.; Sjoden, G. E.

2013-07-01

A mobile 'drive by' passive radiation detection system to be applied in special nuclear materials (SNM) storage facilities for validation and compliance purposes has been designed through the use of computational modeling and new radiation detection methods. This project was the result of work over a 1 year period to create optimal design specifications to include creation of 3D models using both Monte Carlo and deterministic codes to characterize the gamma and neutron leakage out each surface of SNM-bearing canisters. Results were compared and agreement was demonstrated between both models. Container leakages were then used to determine the expected reactionmore » rates using transport theory in the detectors when placed at varying distances from the can. A 'typical' background signature was incorporated to determine the minimum signatures versus the probability of detection to evaluate moving source protocols with collimation. This established the criteria for verification of source presence and time gating at a given vehicle speed. New methods for the passive detection of SNM were employed and shown to give reliable identification of age and material for highly enriched uranium (HEU) and weapons grade plutonium (WGPu). The finalized 'Mobile Pit Verification System' (MPVS) design demonstrated that a 'drive-by' detection system, collimated and operating at nominally 2 mph, is capable of rapidly verifying each and every weapon pit stored in regularly spaced, shelved storage containers, using completely passive gamma and neutron signatures for HEU and WGPu. This system is ready for real evaluation to demonstrate passive total material accountability in storage facilities. (authors)« less

Enforcing the minimum drinking age: state, local and agency characteristics associated with compliance checks and Cops in Shops programs.

PubMed

Montgomery, Jacob M; Foley, Kristie Long; Wolfson, Mark

2006-02-01

To identify state, local and organizational characteristics associated with local law enforcement agencies' implementation of two dramatically different approaches to enforcement of underage drinking laws: compliance checks and Cops in Shops programs. Compliance checks use underage decoys to attempt to purchase alcohol from retail merchants, while Cops in Shops programs deploy undercover law enforcement officers in alcohol outlets to detect and cite persons under the age of 21 who attempt to purchase alcohol. Cross-sectional telephone interview conducted as part of the Tobacco Enforcement Study (TES), which examined enforcement of laws related to youth access to tobacco. Data were collected in 1999 among law enforcement agencies in all 50 states of the United States. Representatives of city police departments, departments of public safety, sheriffs or county police were included (n = 920 local agencies). Alcohol compliance checks and Cops in Shops programs were the primary outcomes. Covariates included state level policies (e.g. beer tax), agency resources (e.g. number of sworn officers) and community demographics (e.g. college dormitory population). Local enforcement agencies were more likely to perform alcohol compliance checks than to have a Cops in Shops program (73.9% compared to 41.1% in cities > 25 000 and 55.7% compared to 23.9% in cities < or = 25 000). Conducting compliance checks for tobacco age-of-sale laws was positively associated with alcohol compliance checks and Cops in Shops (OR 3.30, P < 0.001; OR 1.84, P = 0.001, respectively). Having a Drug Abuse Resistance Education (DARE) officer was negatively related to conducting compliance checks (OR 0.67, P = 0.03). Special community policing units were associated with departments having Cops in Shops programs (OR 1.80, P = 0.006). This study used a nationally representative sample of communities to better understand state and local factors that shape local law enforcement agencies' use of two distinct approaches to underage drinking enforcement. The strong link observed between tobacco and alcohol compliance checks may indicate a culture within some law enforcement agencies supporting strict enforcement of age-of-sale laws.

77 FR 68884 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-16

... petition Docket Number FRA-2012-0060. A copy of the petition, as well as any written communications...] Petition for Waiver of Compliance In accordance with Part 211 of Title 49 Code of Federal Regulations (CFR... equipment overhauls. PATH states that the material and inventory necessary to complete the required...

46 CFR 153.808 - Examination required for a Certificate of Compliance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Testing and Inspection § 153.808 Examination required for a Certificate of Compliance... Officer in Charge, Marine Inspection, determines whether or not the vessel meets the requirements of this...

7 CFR 319.40-8 - Processing at facilities operating under compliance agreements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... compliance agreement shall specify the requirements necessary to prevent spread of plant pests from the facility, requirements to ensure the processing method effectively destroys plant pests, and the requirements for the application of chemical materials in accordance with part 305 of this chapter. The...

7 CFR 319.40-8 - Processing at facilities operating under compliance agreements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... compliance agreement shall specify the requirements necessary to prevent spread of plant pests from the facility, requirements to ensure the processing method effectively destroys plant pests, and the requirements for the application of chemical materials in accordance with part 305 of this chapter. The...

10 CFR 20.1302 - Compliance with dose limits for individual members of the public.

Code of Federal Regulations, 2013 CFR

2013-01-01

... public. 20.1302 Section 20.1302 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Radiation Dose Limits for Individual Members of the Public § 20.1302 Compliance with dose limits..., surveys of radiation levels in unrestricted and controlled areas and radioactive materials in effluents...

10 CFR 20.1302 - Compliance with dose limits for individual members of the public.

Code of Federal Regulations, 2014 CFR

2014-01-01

... public. 20.1302 Section 20.1302 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Radiation Dose Limits for Individual Members of the Public § 20.1302 Compliance with dose limits..., surveys of radiation levels in unrestricted and controlled areas and radioactive materials in effluents...

10 CFR 20.1302 - Compliance with dose limits for individual members of the public.

Code of Federal Regulations, 2012 CFR

2012-01-01

... public. 20.1302 Section 20.1302 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Radiation Dose Limits for Individual Members of the Public § 20.1302 Compliance with dose limits..., surveys of radiation levels in unrestricted and controlled areas and radioactive materials in effluents...

10 CFR 20.1302 - Compliance with dose limits for individual members of the public.

Code of Federal Regulations, 2011 CFR

2011-01-01

... public. 20.1302 Section 20.1302 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Radiation Dose Limits for Individual Members of the Public § 20.1302 Compliance with dose limits..., surveys of radiation levels in unrestricted and controlled areas and radioactive materials in effluents...

10 CFR 20.1302 - Compliance with dose limits for individual members of the public.

Code of Federal Regulations, 2010 CFR

2010-01-01

... public. 20.1302 Section 20.1302 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Radiation Dose Limits for Individual Members of the Public § 20.1302 Compliance with dose limits..., surveys of radiation levels in unrestricted and controlled areas and radioactive materials in effluents...

77 FR 70885 - Uniform Compliance Date for Food Labeling Regulations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-28

... in the following way: Federal eRulemaking Portal: http://www.regulations.gov . Follow the... periodically have announced uniform compliance dates for new food labeling requirements (see, e.g., the Federal... development of new labeling materials. This policy serves consumers' interests as well because the cost of...

40 CFR 63.3151 - How do I demonstrate initial compliance with the emission limitations?

Code of Federal Regulations, 2011 CFR

2011-07-01

... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutants: Surface Coating of... mass average organic HAP content of the materials used during the initial compliance period for each...

Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) Project: Advanced Collision Avoidance System for UAS (ACAS Xu) Interoperability White Paper Presentation

NASA Technical Reports Server (NTRS)

Fern, Lisa

2017-01-01

The Phase 1 DAA Minimum Operational Performance Standards (MOPS) provided requirements for two classes of DAA equipment: equipment Class 1 contains the basic DAA equipment required to assist a pilot in remaining well clear, while equipment Class 2 integrates the Traffic Alert and Collision Avoidance (TCAS) II system. Thus, the Class 1 system provides RWC functionality only, while the Class 2 system is intended to provide both RWC and Collision Avoidance (CA) functionality, in compliance with the Minimum Aviation System Performance (MASPS) for the Interoperability of Airborne Collision Avoidance Systems. The FAAs TCAS Program Office is currently developing Airborne Collision Avoidance System X (ACAS X) to support the objectives of the Federal Aviation Administrations (FAA) Next Generation Air Transportation System Program (NextGen). ACAS X has a suite of variants with a common underlying design that are intended to be optimized for their intended airframes and operations. ACAS Xu being is designed for UAS and allows for new surveillance technologies and tailored logic for platforms with different performance characteristics. In addition to Collision Avoidance (CA) alerting and guidance, ACAS Xu is being tuned to provide RWC alerting and guidance in compliance with the SC 228 DAA MOPS. With a single logic performing both RWC and CA functions, ACAS Xu will provide industry with an integrated DAA solution that addresses many of the interoperability shortcomings of Phase I systems. While the MOPS for ACAS Xu will specify an integrated DAA system, it will need to show compliance with the RWC alerting thresholds and alerting requirements defined in the DAA Phase 2 MOPS. Further, some functional components of the ACAS Xu system such as the remote pilots displayed guidance might be mostly references to the corresponding requirements in the DAA MOPS. To provide a seamless, integrated, RWC-CA system to assist the pilot in remaining well clear and avoiding collisions, several issues need to be addressed within the Phase 2 SC-228 DAA efforts. Interoperability of the RWC and CA alerting and guidance, and ensuring pilot comprehension, compliance and performance, will be a primary research area.

Hanford Site environmental report for calendar year 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dirkes, R.L.; Hanf, R.W.

The Hanford Site environmental report is prepared annually to summarize environmental data and information, to describe environmental management performance, to demonstrate the status of compliance with environmental regulations, and to highlight major environmental programs and efforts. The report is written to meet requirements and guidelines of the U.S. Department of Energy (DOE) and to meet the needs of the public. This summary has been written with a minimum of technical terminology.

“Booster” training: Evaluation of instructor-led bedside cardiopulmonary resuscitation skill training and automated corrective feedback to improve cardiopulmonary resuscitation compliance of Pediatric Basic Life Support providers during simulated cardiac arrest

PubMed Central

Sutton, Robert M.; Niles, Dana; Meaney, Peter A.; Aplenc, Richard; French, Benjamin; Abella, Benjamin S.; Lengetti, Evelyn L.; Berg, Robert A.; Helfaer, Mark A.; Nadkarni, Vinay

2013-01-01

Objective To investigate the effectiveness of brief bedside “booster” cardiopulmonary resuscitation (CPR) training to improve CPR guideline compliance of hospital-based pediatric providers. Design Prospective, randomized trial. Setting General pediatric wards at Children’s Hospital of Philadelphia. Subjects Sixty-nine Basic Life Support–certified hospital-based providers. Intervention CPR recording/feedback defibrillators were used to evaluate CPR quality during simulated pediatric arrest. After a 60-sec pretraining CPR evaluation, subjects were randomly assigned to one of three instructional/feedback methods to be used during CPR booster training sessions. All sessions (training/CPR manikin practice) were of equal duration (2 mins) and differed only in the method of corrective feedback given to participants during the session. The study arms were as follows: 1) instructor-only training; 2) automated defibrillator feedback only; and 3) instructor training combined with automated feedback. Measurements and Main Results Before instruction, 57% of the care providers performed compressions within guideline rate recommendations (rate >90 min−1 and <120 min−1); 71% met minimum depth targets (depth, >38 mm); and 36% met overall CPR compliance (rate and depth within targets). After instruction, guideline compliance improved (instructor-only training: rate 52% to 87% [p .01], and overall CPR compliance, 43% to 78% [p < .02]; automated feedback only: rate, 70% to 96% [p = .02], depth, 61% to 100% [p < .01], and overall CPR compliance, 35% to 96% [p < .01]; and instructor training combined with automated feedback: rate 48% to 100% [p < .01], depth, 78% to 100% [p < .02], and overall CPR compliance, 30% to 100% [p < .01]). Conclusions Before booster CPR instruction, most certified Pediatric Basic Life Support providers did not perform guideline-compliant CPR. After a brief bedside training, CPR quality improved irrespective of training content (instructor vs. automated feedback). Future studies should investigate bedside training to improve CPR quality during actual pediatric cardiac arrests. PMID:20625336

"Booster" training: evaluation of instructor-led bedside cardiopulmonary resuscitation skill training and automated corrective feedback to improve cardiopulmonary resuscitation compliance of Pediatric Basic Life Support providers during simulated cardiac arrest.

PubMed

Sutton, Robert M; Niles, Dana; Meaney, Peter A; Aplenc, Richard; French, Benjamin; Abella, Benjamin S; Lengetti, Evelyn L; Berg, Robert A; Helfaer, Mark A; Nadkarni, Vinay

2011-05-01

To investigate the effectiveness of brief bedside "booster" cardiopulmonary resuscitation (CPR) training to improve CPR guideline compliance of hospital-based pediatric providers. Prospective, randomized trial. General pediatric wards at Children's Hospital of Philadelphia. Sixty-nine Basic Life Support-certified hospital-based providers. CPR recording/feedback defibrillators were used to evaluate CPR quality during simulated pediatric arrest. After a 60-sec pretraining CPR evaluation, subjects were randomly assigned to one of three instructional/feedback methods to be used during CPR booster training sessions. All sessions (training/CPR manikin practice) were of equal duration (2 mins) and differed only in the method of corrective feedback given to participants during the session. The study arms were as follows: 1) instructor-only training; 2) automated defibrillator feedback only; and 3) instructor training combined with automated feedback. Before instruction, 57% of the care providers performed compressions within guideline rate recommendations (rate >90 min(-1) and <120 min(-1)); 71% met minimum depth targets (depth, >38 mm); and 36% met overall CPR compliance (rate and depth within targets). After instruction, guideline compliance improved (instructor-only training: rate 52% to 87% [p .01], and overall CPR compliance, 43% to 78% [p < .02]; automated feedback only: rate, 70% to 96% [p = .02], depth, 61% to 100% [p < .01], and overall CPR compliance, 35% to 96% [p < .01]; and instructor training combined with automated feedback: rate 48% to 100% [p < .01], depth, 78% to 100% [p < .02], and overall CPR compliance, 30% to 100% [p < .01]). Before booster CPR instruction, most certified Pediatric Basic Life Support providers did not perform guideline-compliant CPR. After a brief bedside training, CPR quality improved irrespective of training content (instructor vs. automated feedback). Future studies should investigate bedside training to improve CPR quality during actual pediatric cardiac arrests.

Hanford Site Environmental Report 1999

DOE Office of Scientific and Technical Information (OSTI.GOV)

TM Poston; RW Hanf; RL Dirkes

This Hanford Site environmental report is prepared annually to summarize environmental data and information, to describe environmental management performance, to demonstrate the status of compliance with environmental regulations, and to highlight major environmental programs and efforts. The report is written to meet requirements and guidelines of the U.S. Department of Energy (DOE) and to meet the needs of the public. This summary has been written with a minimum of technical terminology. Individual sections of the report are designed to: (1) describe the Hanford Site and its mission; (2) summarize the status of compliance with environmental regulations; (3) describe the environmentalmore » programs at the Hanford Site; (4) discuss the estimated radionuclide exposure to the public from 1999 Hanford Site activities; (5) present the effluent monitoring, environmental surveillance, groundwater protection and monitoring information; and (6) discuss the activities to ensure quality.« less

Hanford Site 1998 Environmental Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

RL Dirkes; RW Hanf; TM Poston

This Hanford Site environmental report is prepared annually to summarize environmental data and information, to describe environmental management performance, to demonstrate the status of compliance with environmental regulations, and to highlight major environmental programs and efforts. The report is written to meet requirements and guidelines of the U.S. Department of Energy (DOE) and to meet the needs of the public. This summary has been written with a minimum of technical terminology. Individual sections of the report are designed to: describe the Hanford Site and its mission; summarize the status of compliance with environmental regulations; describe the environmental programs at themore » Hanford Site; discuss the estimated radionuclide exposure to the public from 1998 Hanford Site activities; present the effluent monitoring, environmental surveillance, and groundwater protection and monitoring information; and discuss the activities to ensure quality.« less

40 CFR 63.4551 - How do I demonstrate initial compliance with the emission limitations?

Code of Federal Regulations, 2014 CFR

2014-07-01

... Surface Coating of Plastic Parts and Products Compliance Requirements for the Emission Rate Without Add-on..., Inks, and Related Products” (incorporated by reference, see § 63.14), information from the supplier or... enforcement agency that the formulation data are correct. If you purchase materials or monitor consumption by...

40 CFR 63.4551 - How do I demonstrate initial compliance with the emission limitations?

Code of Federal Regulations, 2012 CFR

2012-07-01

... Surface Coating of Plastic Parts and Products Compliance Requirements for the Emission Rate Without Add-on..., Inks, and Related Products” (incorporated by reference, see § 63.14), information from the supplier or... enforcement agency that the formulation data are correct. If you purchase materials or monitor consumption by...

40 CFR 763.97 - Compliance and enforcement.

Code of Federal Regulations, 2012 CFR

2012-07-01

... CONTROL ACT ASBESTOS Asbestos-Containing Materials in Schools § 763.97 Compliance and enforcement. (a... Title II of the Act should direct the complaint to the Governor of the State or the EPA Asbestos... identified as a citizen complaint pursuant to section 207(d) of Title II of TSCA. The EPA Asbestos Ombudsman...

40 CFR 763.97 - Compliance and enforcement.

Code of Federal Regulations, 2014 CFR

2014-07-01

... CONTROL ACT ASBESTOS Asbestos-Containing Materials in Schools § 763.97 Compliance and enforcement. (a... Title II of the Act should direct the complaint to the Governor of the State or the EPA Asbestos... identified as a citizen complaint pursuant to section 207(d) of Title II of TSCA. The EPA Asbestos Ombudsman...

40 CFR 763.97 - Compliance and enforcement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... CONTROL ACT ASBESTOS Asbestos-Containing Materials in Schools § 763.97 Compliance and enforcement. (a... Title II of the Act should direct the complaint to the Governor of the State or the EPA Asbestos... identified as a citizen complaint pursuant to section 207(d) of Title II of TSCA. The EPA Asbestos Ombudsman...

40 CFR 763.97 - Compliance and enforcement.

Code of Federal Regulations, 2013 CFR

2013-07-01

... CONTROL ACT ASBESTOS Asbestos-Containing Materials in Schools § 763.97 Compliance and enforcement. (a... Title II of the Act should direct the complaint to the Governor of the State or the EPA Asbestos... identified as a citizen complaint pursuant to section 207(d) of Title II of TSCA. The EPA Asbestos Ombudsman...

40 CFR 763.97 - Compliance and enforcement.

Code of Federal Regulations, 2011 CFR

2011-07-01

... CONTROL ACT ASBESTOS Asbestos-Containing Materials in Schools § 763.97 Compliance and enforcement. (a... Title II of the Act should direct the complaint to the Governor of the State or the EPA Asbestos... identified as a citizen complaint pursuant to section 207(d) of Title II of TSCA. The EPA Asbestos Ombudsman...

Keeping Your School or College Catalog in Compliance with Federal Law and Regulations.

ERIC Educational Resources Information Center

Federal Interagency Committee on Education, Washington, DC.

Information is provided in this guide to assist educational institutions in bringing their catalogs and other informational materials into compliance with federal laws and regulations. It summarizes applicable laws and regulations and includes the names and mailing addresses of the agencies responsible for administering these laws, regulations,…

Student manual, Book 2: Orientation to occupational safety compliance in DOE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Colley, D.L.

1993-10-01

This is a student hand-book an Occupational Safety Compliance in DOE. Topics include the following: Electrical; materials handling & storage; inspection responsibilities & procedures; general environmental controls; confined space entry; lockout/tagout; office safety, ergonomics & human factors; medical & first aid, access to records; construction safety; injury/illness reporting system; and accident investigation procedures.

77 FR 69926 - Advisory Notice: Notice of Intent To Provide Compliance Date Extension for Air-Passenger...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-21

... Materials Safety Administration (PHMSA), DOT. ACTION: Advisory notice. SUMMARY: PHMSA and the Federal... compliance date in a future rulemaking action. This notice is intended to provide the widest dissemination of our planned future action to all potentially affected parties and to allow for development of a...

75 FR 1091 - Self-Regulatory Organizations; Notice of Filing and Immediate Effectiveness of Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-08

... delete NYSE Rule 445 (Anti-Money Laundering Compliance Program) and adopt new Rule 3310 (Anti-Money..., subject to certain amendments, NASD Rule 3011 (Anti- Money Laundering Compliance Program) and related Interpretive Material NASD IM-3011-1 and 3011-2 as consolidated FINRA Rule 3310 (Anti-Money Laundering...

7 CFR 301.50-6 - Compliance agreements and cancellation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... understands this subpart. 6 6 Compliance agreement forms are available without charge from the Animal and..., stating the reasons for the decision. A hearing will be held to resolve any conflict as to any material fact. Rules of practice concerning such a hearing will be adopted by the Administrator. (Approved by...

A highly compliant serpentine shaped polyimide interconnect for front-end strain relief in chronic neural implants.

PubMed

Sankar, Viswanath; Sanchez, Justin C; McCumiskey, Edward; Brown, Nagid; Taylor, Curtis R; Ehlert, Gregory J; Sodano, Henry A; Nishida, Toshikazu

2013-01-01

While the signal quality of recording neural electrodes is observed to degrade over time, the degradation mechanisms are complex and less easily observable. Recording microelectrodes failures are attributed to different biological factors such as tissue encapsulation, immune response, and disruption of blood-brain barrier (BBB) and non-biological factors such as strain due to micromotion, insulation delamination, corrosion, and surface roughness on the recording site (1-4). Strain due to brain micromotion is considered to be one of the important abiotic factors contributing to the failure of the neural implants. To reduce the forces exerted by the electrode on the brain, a high compliance 2D serpentine shaped electrode cable was designed, simulated, and measured using polyimide as the substrate material. Serpentine electrode cables were fabricated using MEMS microfabrication techniques, and the prototypes were subjected to load tests to experimentally measure the compliance. The compliance of the serpentine cable was numerically modeled and quantitatively measured to be up to 10 times higher than the compliance of a straight cable of same dimensions and material.

A Highly Compliant Serpentine Shaped Polyimide Interconnect for Front-End Strain Relief in Chronic Neural Implants

PubMed Central

Sankar, Viswanath; Sanchez, Justin C.; McCumiskey, Edward; Brown, Nagid; Taylor, Curtis R.; Ehlert, Gregory J.; Sodano, Henry A.; Nishida, Toshikazu

2013-01-01

While the signal quality of recording neural electrodes is observed to degrade over time, the degradation mechanisms are complex and less easily observable. Recording microelectrodes failures are attributed to different biological factors such as tissue encapsulation, immune response, and disruption of blood-brain barrier (BBB) and non-biological factors such as strain due to micromotion, insulation delamination, corrosion, and surface roughness on the recording site (1–4). Strain due to brain micromotion is considered to be one of the important abiotic factors contributing to the failure of the neural implants. To reduce the forces exerted by the electrode on the brain, a high compliance 2D serpentine shaped electrode cable was designed, simulated, and measured using polyimide as the substrate material. Serpentine electrode cables were fabricated using MEMS microfabrication techniques, and the prototypes were subjected to load tests to experimentally measure the compliance. The compliance of the serpentine cable was numerically modeled and quantitatively measured to be up to 10 times higher than the compliance of a straight cable of same dimensions and material. PMID:24062716

10 CFR 171.16 - Annual fees: Materials licensees, holders of certificates of compliance, holders of sealed source...

Code of Federal Regulations, 2013 CFR

2013-01-01

.... Licenses for possession and use of byproduct material in sealed sources for irradiation of materials in... sources for irradiation of materials in which the source is exposed for irradiation purposes. This category also includes underwater irradiators for irradiation of materials in which the source is not...

Transportation research synthesis : ADA compliance reference and training materials.

DOT National Transportation Integrated Search

2010-03-01

Our findings are presented in three categories: Reference Materials, Training Materials and State DOT Current : Practices. Appendix A to this report contains an updated list of ADA contacts for all 50 states and the District of : Columbia, and Append...

49 CFR Appendix A to Part 223 - Certification of Glazing Materials

Code of Federal Regulations, 2011 CFR

2011-10-01

... material to be tested (Target Material) shall be a full scale sample of the largest dimension intended to... weight impacts at a minimum of 960 feet per second velocity. (ii) Large Object Impact in which a cinder block of 24 lbs minimum weight with dimensions of 8 inches by 8 inches by 16 inches nominally impacts at...

Design & synthesis of silicone elastomer networks with tunable physico-chemical characteristics

NASA Astrophysics Data System (ADS)

Willoughby, Julie Ann-Crowe

2007-05-01

We have engineered functional surfaces via the manipulation of silicone elastomers (SEs). The most common silicone, poly(dimethylsiloxane) PDMS, can be both challenging and advantageous in the design of surfaces due to its inherent inertness and flexibility of the siloxane backbone. This unique polymer is approaching a $10 billion dollar market attributed to its formulation in a wide array of applications; from the personal care industry to the electronics industry. While it can be used for many applications, surface design with PDMS usually requires a chemical or physical modification of the polymeric network. In addition, surface characteristics are tailored for specific functions since there is not one surface that fits all end-uses. In studying the intrinsic behavior of engineered SEs, we asked questions regarding surface stability, environmental conformation and adaptability, and tuning physical features. We report on the formation of responsive surfaces with tailorable surface-reconstruction kinetics and switching hysteresis by thiol-ene radical addition of mercaptoalkanols with variable lengths to poly(vinylmethylsiloxane) networks. Exposing the modified surfaces to water led to a rearrangement of the hydrophilic alkanes at the surface. The rearrangement kinetics decreases with increasing number of the methylene spacers (n) in the mercaptoalkanol. The response kinetics is found to be very fast for n = 2 and 6. For instance, upon exposing to water, the water contact angle on 3-mercaptopropanol-based surfaces decreases by ≈35° at the rate of 2°/second. The high flexibility of the siloxane backbone endows these materials with switching longevity; the materials were able to switch their wettability over 10 cycles with minimum hysteresis. Increasing the number of methylene spacers to n = 11 decreases the surface reorganization dramatically. Formation of semi-crystalline regions in such materials (detected via IR) is responsible for initial "sluggish" kinetics and eventual surface "freezing". The effects of surface chemistry and topology on cellular adhesion and proliferation have been studied extensively in the past. However, little work exists that aims at probing the effects of surface morphology and elastic modulus on cell behavior. To achieve timely and comprehensive experimental design, there is need for the availability of novel substrata with tunable mechanical properties (or compliance) at the micro and meso-scale level ranging from individual cells to whole tissues. Despite expansive research that has targeted the understanding of cellular response to its host scaffold, the choice of material and extrapolation of findings from one cell/material system to another has proven difficult. Thus establishing general relationships between substrate compliance and cell behavior cannot be considered independent of the material and cell type. In our work, we have explored creating surfaces from SEs comprising gradients in stiffness (or elastic modulus), by controlling the degree of cross-linking. Network regions consisting of higher cross-linking demonstrate a greater elastic modulus. We present two methods to control the mechanical properties of silicone elastomers. The first technique utilizes interdiffusion of multiple SEs with varied molecular weights that are subsequently cross-linked into a network. The second method involves synthesizing a UV-curable SE. This method controls the degree of cross-linking by regulating the intensity of the UV light via a transparency with tunable transmittance placed on top of the SE film. Our results show that it is possible to generate compliance gradients through either route, enabling a large range of both gradient patterns and stiffness.

A classical mechanics model for the interpretation of piezoelectric property data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bell, Andrew J., E-mail: a.j.bell@leeds.ac.uk

2015-12-14

In order to provide a means of understanding, the relationship between the primary electromechanical coefficients and simple crystal chemistry parameters for piezoelectric materials, a static analysis of a 3 atom, dipolar molecule has been undertaken to derive relationships for elastic compliance s{sup E}, dielectric permittivity ε{sup X}, and piezoelectric charge coefficient d in terms of an effective ionic charge and two inter-atomic force constants. The relationships demonstrate the mutual interdependence of the three coefficients, in keeping with experimental evidence from a large dataset of commercial piezoelectric materials. It is shown that the electromechanical coupling coefficient k is purely an expressionmore » of the asymmetry in the two force constants or bond compliances. The treatment is extended to show that the quadratic electrostriction relation between strain and polarization, in both centrosymmetric and non-centrosymmetric systems, is due to the presence of a non-zero 2nd order term in the bond compliance. Comparison with experimental data explains the counter-intuitive, positive correlation of k with s{sup E} and ε{sup X} and supports the proposition that high piezoelectric activity in single crystals is dominated by large compliance coupled with asymmetry in the sub-cell force constants. However, the analysis also shows that in polycrystalline materials, the dielectric anisotropy of the constituent crystals can be more important for attaining large charge coefficients. The model provides a completely new methodology for the interpretation of piezoelectric and electrostrictive property data and suggests methods for rapid screening for high activity in candidate piezoelectric materials, both experimentally and by novel interrogation of ab initio calculations.« less

SB certification handout material requirements, test methods, responsibilities, and minimum classification levels for mixture-based specification for flexible base.

DOT National Transportation Integrated Search

2012-10-01

A handout with tables representing the material requirements, test methods, responsibilities, and minimum classification levels mixture-based specification for flexible base and details on aggregate and test methods employed, along with agency and co...

Testing the associations between different aspects of seafarers' employment contract and on-board internet access and their job and life satisfaction and health.

PubMed

Slišković, Ana; Penezić, Zvjezdan

2016-12-01

The aim of this study was to test for associations between different aspects of contract and on-board internet access and seafarers' satisfaction and health. Altogether 298 Croatian seafarers, all officers, employed on cargo ships, with a minimum work experience of two years with their current shipping company, participated in an online survey. The questionnaire included sociodemographic items, questions relating to their employment contract and internet access, and measures of job satisfaction, life satisfaction, mental health, and gastrointestinal and cardiovascular symptoms. Their job- and lifesatisfaction levels were higher for shorter duration on board, favourable ratio of work to non-work days, and compliance with the employment contract regarding the changes to work and non-work days. Mental health differed likewise but only in relation to two aspects of the contract: on-board duration and compliance with the contract. The level of gastrointestinal symptoms was lower in cases of shorter on-board duration and compliance with the contract, and in seafarers who have free, unlimited internet access on board. Lower level of cardiovascular symptoms was found in seafarers with free, unlimited internet access on board. Our findings suggest that in promoting satisfaction and health in seafaring, attention should be given to reducing on-board duration, compliance with the contract, and internet accessibility on board.

The Effect of Homework Compliance on Treatment Outcomes for Participants with Myalgic Encephalomyelitis/Chronic Fatigue Syndrome

PubMed Central

Hlavaty, Laura E.; Brown, Molly M.; Jason, Leonard A.

2011-01-01

Purpose This study examined the relationship between level of treatment engagement through completion of homework and treatment outcomes within non-pharmacological interventions for participants with ME/CFS. Methods A sample of 82 participants with ME/CFS was randomly assigned to one of four non-pharmacological interventions. Each intervention involved 13 sessions over the course of six months. Change scores were computed for self-report measures taken at baseline and 12-month follow-up. Homework compliance was calculated as the percentage of completed assignments across the total number of sessions and grouped into three categories: minimum (0–25%), moderate (25.1–75%), or maximum (75.1–100%). Results Findings revealed that after controlling for treatment condition, those who completed a maximum amount of homework had greater improvement on a number of self-report outcome measures involving role, social and mental health functioning. There were no differential improvements in physical and fatigue functioning based on level of homework compliance. Implications Findings from this study suggest homework compliance can have a positive influence on some aspects of physical, social, and mental health functioning in participants with ME/CFS. It should be emphasized that these interventions do not cure this illness. The lack of significant changes in physical functioning and fatigue levels suggests a need for more multidisciplinary treatment approaches that can elicit improvement in these areas. PMID:21767035

The effect of homework compliance on treatment outcomes for participants with myalgic encephalomyelitis/chronic fatigue syndrome.

PubMed

Hlavaty, Laura E; Brown, Molly M; Jason, Leonard A

2011-08-01

This study examined the relationship between level of treatment engagement through completion of homework on treatment outcomes within nonpharmacological interventions for participants with ME/CFS. A sample of 82 participants with ME/CFS was randomly assigned to one of four nonpharmacological interventions. Each intervention involved 13 sessions over the course of 6 months. Change scores were computed for self-report measures taken at baseline and 12-month follow-up. Homework compliance was calculated as the percentage of completed assignments across the total number of sessions and grouped into three categories: minimum (0-25%), moderate (25.1-75%), or maximum (75.1-100%). Findings revealed that after controlling for treatment condition, those who completed a maximum amount of homework had greater improvement on a number of self-report outcome measures involving role, social, and mental health functioning. There were no differential improvements in physical and fatigue functioning based on level of homework compliance. Findings from this study suggest homework compliance can have a positive influence on some aspects of physical, social, and mental health functioning in participants with ME/CFS. It should be emphasized that these interventions do not cure this illness. The lack of significant changes in physical functioning and fatigue levels suggests a need for more multidisciplinary treatment approaches that can elicit improvement in these areas.

49 CFR 180.413 - Repair, modification, stretching, rebarrelling, or mounting of specification cargo tanks.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS CONTINUING QUALIFICATION AND MAINTENANCE OF PACKAGINGS Qualification and Maintenance... respect to structural design analysis, material and welding procedures. (ii) Assure compliance of the...

76 FR 36138 - Certificate of Alternative Compliance for the Passenger Vessel CHICAGO'S LEADING LADY

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-21

... CONTACT: If you have questions on this notice, call LCDR Wm. Erik Pickering, District Nine, Prevention Branch, U.S. Coast Guard, telephone 216-902-6050. If you have questions on viewing or submitting material... as high as required for full compliance with Annex I of the Inland Rules Act. The Commandant, U.S...

10 CFR 171.16 - Annual fees: Materials licensees, holders of certificates of compliance, holders of sealed source...

Code of Federal Regulations, 2014 CFR

2014-01-01

... material in sealed sources for irradiation of materials in which the source is not removed from its shield... than 10,000 curies of byproduct material in sealed sources for irradiation of materials in which the source is exposed for irradiation purposes. This category also includes underwater irradiators for...

Revealing region-specific biofilm viscoelastic properties by means of a micro-rheological approach.

PubMed

Cao, Huayu; Habimana, Olivier; Safari, Ashkan; Heffernan, Rory; Dai, Yihong; Casey, Eoin

2016-01-01

Particle-tracking microrheology is an in situ technique that allows quantification of biofilm material properties. It overcomes the limitations of alternative techniques such as bulk rheology or force spectroscopy by providing data on region specific material properties at any required biofilm location and can be combined with confocal microscopy and associated structural analysis. This article describes single particle tracking microrheology combined with confocal laser scanning microscopy to resolve the biofilm structure in 3 dimensions and calculate the creep compliances locally. Samples were analysed from Pseudomonas fluorescens biofilms that were cultivated over two timescales (24 h and 48 h) and alternate ionic conditions (with and without calcium chloride supplementation). The region-based creep compliance analysis showed that the creep compliance of biofilm void zones is the primary contributor to biofilm mechanical properties, contributing to the overall viscoelastic character.

A study of the effectiveness of a workplace violence intervention for small retail and service establishments.

PubMed

Casteel, Carri; Peek-Asa, Corinne; Greenland, Sander; Chu, Lawrence D; Kraus, Jess F

2008-12-01

Examine the effectiveness of a robbery and violence prevention program in small businesses in Los Angeles. Gas/convenience, liquor and grocery stores, bars/restaurants, and motels were enrolled between 1997 and 2000. Intervention businesses (n = 305) were provided training, program implementation materials, and recommendations for a comprehensive security program. Control businesses (n = 96) received neither training nor program materials. Rate ratios comparing intervention to control businesses were 0.90 for violent crime (95% confidence limits [CL] = 0.53, 1.53) and 0.81 for robbery (95% CL = 0.38, 1.73). The reduction in violent crime was concentrated in high-compliance intervention businesses (risk ratio = 0.74, 95% CL = 0.40, 1.36). Low-compliance intervention businesses had practically the same postintervention crime as the control businesses. Our results suggest that the workplace violence intervention may reduce violent crime among high-risk businesses, especially those with high program compliance.

The role of maternal stress during pregnancy, maternal discipline, and child COMT Val158Met genotype in the development of compliance.

PubMed

Kok, Rianne; Bakermans-Kranenburg, Marian J; van Ijzendoorn, Marinus H; Velders, Fleur P; Linting, Mariëlle; Jaddoe, Vincent W V; Hofman, Albert; Verhulst, Frank C; Tiemeier, Henning

2013-07-01

Maternal discipline is an important predictor of child committed compliance. Maternal stress can affect both parenting and child development. In a large population-based cohort study (N = 613) we examined whether maternal discipline mediated the association between maternal stress during pregnancy and child compliance, and whether COMT or DRD4 polymorphisms moderated the association between maternal discipline and child compliance. Family-related and general stress were measured through maternal self-report and genetic material was collected through cord blood sampling at birth. Mother-child dyads were observed at 36 months in disciplinary tasks in which the child was not allowed to touch attractive toys. Maternal discipline and child compliance were observed in two different tasks and independently coded. The association between family stress during pregnancy and child committed compliance was mediated by maternal positive discipline. Children with more COMT Met alleles seemed more susceptible to maternal positive discipline than children with more COMT Val alleles. Copyright © 2012 Wiley Periodicals, Inc.

77 FR 18871 - Administrative Guide for Verifying Compliance With Packaging Requirements for Shipment and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-28

... Packaging Requirements for Shipment and Receipt of Radioactive Material AGENCY: Nuclear Regulatory... with Packaging Requirements for Shipment and Receipt of Radioactive Material.'' This regulatory guide... for transporting licensed material under 10 CFR part 71, ``Packaging and Transportation of Radioactive...

40 CFR 227.13 - Dredged materials.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Dredged material is composed predominantly of sand, gravel, rock, or any other naturally occurring bottom...) Dredged material is for beach nourishment or restoration and is composed predominantly of sand, gravel or... major constituents of the liquid phase are in compliance with the applicable marine water quality...

40 CFR 63.997 - Performance test and compliance assessment requirements for control devices.

Code of Federal Regulations, 2012 CFR

2012-07-01

... regulated materials are loaded, and samples shall be collected using integrated sampling or grab samples... material concentration and percent reduction may be measured as either total organic regulated material or... regulated material or TOC, sampling sites shall be located as specified in paragraphs (e)(2)(i)(A)(1) and (e...

40 CFR 63.997 - Performance test and compliance assessment requirements for control devices.

Code of Federal Regulations, 2013 CFR

2013-07-01

... regulated materials are loaded, and samples shall be collected using integrated sampling or grab samples... material concentration and percent reduction may be measured as either total organic regulated material or... regulated material or TOC, sampling sites shall be located as specified in paragraphs (e)(2)(i)(A)(1) and (e...

40 CFR 63.997 - Performance test and compliance assessment requirements for control devices.

Code of Federal Regulations, 2014 CFR

2014-07-01

... regulated materials are loaded, and samples shall be collected using integrated sampling or grab samples... material concentration and percent reduction may be measured as either total organic regulated material or... regulated material or TOC, sampling sites shall be located as specified in paragraphs (e)(2)(i)(A)(1) and (e...

Testing of CMA-2000 Microwave Landing System (MLS) airborne receiver

NASA Astrophysics Data System (ADS)

Labreche, L.; Murfin, A. J.

1989-09-01

Microwave landing system (MLS) is a precision approach and landing guidance system which provides position information and various air to ground data. Position information is provided on a wide coverage sector and is determined by an azimuth angle measurement, an elevation angle measurement, and a range measurement. MLS performance standards and testing of the MLS airborne receiver is mainly governed by Technical Standard Order TSO-C104 issued by the Federal Aviation Administration. This TSO defines detailed test procedures for use in determining the required performance under standard and stressed conditions. It also imposes disciplines on software development and testing procedures. Testing performed on the CMA-2000 MLS receiver and methods used in its validation are described. A computer automated test system has been developed to test for compliance with RTCA/DO-177 Minimum Operation Performance Standards. Extensive software verification and traceability tests designed to ensure compliance with RTCA/DO-178 are outlined.

40 CFR 725.424 - Requirements for the Tier I exemption.

Code of Federal Regulations, 2012 CFR

2012-07-01

... introduced genetic material meets the criteria under § 725.421. (3) The physical containment and control... including the criteria for the recipient microorganism, the introduced genetic material, the physical... following: (i) Compliance with the introduced genetic material criteria described in § 725.421. (ii...

40 CFR 725.424 - Requirements for the Tier I exemption.

Code of Federal Regulations, 2013 CFR

2013-07-01

... introduced genetic material meets the criteria under § 725.421. (3) The physical containment and control... including the criteria for the recipient microorganism, the introduced genetic material, the physical... following: (i) Compliance with the introduced genetic material criteria described in § 725.421. (ii...

40 CFR 725.424 - Requirements for the Tier I exemption.

Code of Federal Regulations, 2011 CFR

2011-07-01

... introduced genetic material meets the criteria under § 725.421. (3) The physical containment and control... including the criteria for the recipient microorganism, the introduced genetic material, the physical... following: (i) Compliance with the introduced genetic material criteria described in § 725.421. (ii...

40 CFR 725.424 - Requirements for the Tier I exemption.

Code of Federal Regulations, 2014 CFR

2014-07-01

... introduced genetic material meets the criteria under § 725.421. (3) The physical containment and control... including the criteria for the recipient microorganism, the introduced genetic material, the physical... following: (i) Compliance with the introduced genetic material criteria described in § 725.421. (ii...

40 CFR 725.424 - Requirements for the Tier I exemption.

Code of Federal Regulations, 2010 CFR

2010-07-01

... introduced genetic material meets the criteria under § 725.421. (3) The physical containment and control... including the criteria for the recipient microorganism, the introduced genetic material, the physical... following: (i) Compliance with the introduced genetic material criteria described in § 725.421. (ii...

40 CFR 60.5411 - What additional requirements must I meet to determine initial compliance for my covers and closed...

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 7 2014-07-01 2014-07-01 false What additional requirements must I meet to determine initial compliance for my covers and closed vent systems routing materials from storage vessels and centrifugal compressor wet seal degassing systems? 60.5411 Section 60.5411 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY ...

40 CFR 60.5411 - What additional requirements must I meet to determine initial compliance for my closed vent...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 7 2013-07-01 2013-07-01 false What additional requirements must I meet to determine initial compliance for my closed vent systems routing materials from storage vessels and centrifugal compressor wet seal degassing systems? 60.5411 Section 60.5411 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)...

Trans-Alaska crude oil pipeline. a petition for a waiver of compliance for liquid pipeline girth weld defects at the Valdez Terminal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-02-08

A petition for a waiver of compliance for liquid pipeline girth weld defects at the Valdez Terminal of Alyeska Pipeline Service Co. has been granted by the U.S. Materials Transportation Bureau. The waiver covers 217 welds which contain defects such as arc burns not allowed in the regulations.

John F. Kennedy Space Center, Safety, Reliability, Maintainability and Quality Assurance, Survey and Audit Program

NASA Technical Reports Server (NTRS)

1994-01-01

This document is the product of the KSC Survey and Audit Working Group composed of civil service and contractor Safety, Reliability, and Quality Assurance (SR&QA) personnel. The program described herein provides standardized terminology, uniformity of survey and audit operations, and emphasizes process assessments rather than a program based solely on compliance. The program establishes minimum training requirements, adopts an auditor certification methodology, and includes survey and audit metrics for the audited organizations as well as the auditing organization.

Buy Energy-Efficient Products: A Guide for Federal Purchasers and Specifiers

DOE Office of Scientific and Technical Information (OSTI.GOV)

In a single year, energy-efficient product purchases could save the federal government almost a half billion dollars worth of energy. By purchasing products that exceed the minimum required efficiency levels, buyers can save the government even more energy and money. Federal employees and contractors must take an active role in ensuring that the government receives products that meet efficiency requirements. This document provides an overview of product purchasing requirements and shows you how to write compliant contracts, find funding, and confirm product compliance.

Time-Dependent Behavior of a Graphite/Thermoplastic Composite and the Effects of Stress and Physical Aging

NASA Technical Reports Server (NTRS)

Gates, Thomas S.; Feldman, Mark

1995-01-01

Experimental studies were performed to determine the effects of stress and physical aging on the matrix dominated time dependent properties of IM7/8320 composite. Isothermal tensile creep/aging test techniques developed for polymers were adapted for testing of the composite material. Time dependent transverse and shear compliance's for an orthotropic plate were found from short term creep compliance measurements at constant, sub-T(8) temperatures. These compliance terms were shown to be affected by physical aging. Aging time shift factors and shift rates were found to be a function of temperature and applied stress.

Nanostructured materials for ocular delivery: nanodesign for enhanced bioadhesion, transepithelial permeability and sustained delivery

PubMed Central

Kim, Jean; Schlesinger, Erica B; Desai, Tejal A

2015-01-01

Effective drug delivery to the eye is an ongoing challenge due to poor patient compliance coupled with numerous physiological barriers. Eye drops for the front of the eye and ocular injections for the back of the eye are the most prevalent delivery methods, both of which require relatively frequent administration and are burdensome to the patient. Novel drug delivery techniques stand to drastically improve safety, efficacy and patient compliance for ocular therapeutics. Remarkable advances in nanofabrication technologies make the application of nanostructured materials to ocular drug delivery possible. This article focuses on the use of nanostructured materials with nanoporosity or nanotopography for ocular delivery. Specifically, we discuss nanotopography for enhanced bioadhesion and permeation and nanoporous materials for controlled release drug delivery. As examples, application of polymeric nanostructures for greater transepithelial permeability, nanostructured microparticles for enhanced preocular retention time and nanoporous membranes for tuning drug release profile are covered. PMID:26652282

Trends in United States Biological Materials Oversight and Institutional Biosafety Committees

ERIC Educational Resources Information Center

Jenkins, Chris

2014-01-01

Biological materials oversight in life sciences research in the United States is a challenging endeavor for institutions and the scientific, regulatory compliance, and federal communities. In order to assess biological materials oversight at Institutional Biosafety Committees (IBCs) registered with the United States National Institutes of Health,…

40 CFR 63.694 - Testing methods and procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... material stream shall be collected from the container, pipeline, or other device used to deliver the off... off-site material streams at the point-of-delivery for compliance with standards specified § 63.683 of... determine the average VOHAP concentration for treated off-site material streams at the point-of-treatment...

77 FR 36017 - Regulatory Guide 7.3, Procedures for Picking Up and Receiving Packages of Radioactive Material

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-15

... Receiving Packages of Radioactive Material AGENCY: Nuclear Regulatory Commission. ACTION: Notice of... Guide (RG) 7.3, ``Procedures for Picking Up and Receiving Packages of Radioactive Material.'' The guide..., ``Administrative Guide for Verifying Compliance with Packaging Requirements for Shipment and Receipt of Radioactive...

Revisiting the generalized scaling law for adhesion: role of compliance and extension to progressive failure.

PubMed

Mojdehi, Ahmad R; Holmes, Douglas P; Dillard, David A

2017-10-25

A generalized scaling law, based on the classical fracture mechanics approach, is developed to predict the bond strength of adhesive systems. The proposed scaling relationship depends on the rate of change of debond area with compliance, rather than the ratio of area to compliance. This distinction can have a profound impact on the expected bond strength of systems, particularly when the failure mechanism changes or the compliance of the load train increases. Based on the classical fracture mechanics approach for rate-independent materials, the load train compliance should not affect the force capacity of the adhesive system, whereas when the area to compliance ratio is used as the scaling parameter, it directly influences the bond strength, making it necessary to distinguish compliance contributions. To verify the scaling relationship, single lap shear tests were performed for a given pressure sensitive adhesive (PSA) tape specimens with different bond areas, number of backing layers, and load train compliance. The shear lag model was used to derive closed-form relationships for the system compliance and its derivative with respect to the debond area. Digital image correlation (DIC) is implemented to verify the non-uniform shear stress distribution obtained from the shear lag model in a lap shear geometry. The results obtained from this approach could lead to a better understanding of the relationship between bond strength and the geometry and mechanical properties of adhesive systems.

Patient compliance and supportive periodontal therapy: Study among young adults of Namakkal district

PubMed Central

Gokulanathan, Subramanium; Balan, Natarajan; Aravind, Ramaraj Jayabalan; Thangavelu, Kavin

2014-01-01

Aims: The aim of this study is to assess the patient compliance to supportive and maintenance periodontal therapy and to determine the reason for noncompliance among young adult patients of Namakkal district, India. Materials and Methods: This was a cross-sectional study conducted on 400 patients who underwent periodontal therapy and subsequently recalled for supportive and maintenance periodontal treatment in the Department of Periodontics, Vivekanandha Dental College for Women, Namakkal. Patients age group 25-35 years and of both gender were equally selected and grouped by occupation and socioeconomic status. According to their compliance with appointments, they are categorized as complete compliance, partially compliance and insufficient or noncompliance. Noncompliance and partially compliance patients were contacted and asked to rate their experience and reason for noncompliance. Results: In this study, 80% of patients showed complete compliance and were regular for supportive periodontal therapy appointments. Women were more regular in maintaining recall appointments than men. Salaried employers showed 84.3% complete compliance, while self-employed personals showed 77% complete compliance and 75% of nonworking personals were regular to the appointment schedule. Noncompliance person has quoted lack of time and forgetting the appointment date as a major reason for missed appointments. Conclusions: This study recommends the need for improvement in communication skills of practitioners and weekend appointment for patient undergoing periodontal maintenance therapy. PMID:25210365

Pharmaceutical quality assurance of local private distributors: a secondary analysis in 13 low-income and middle-income countries.

PubMed

Van Assche, Kerlijn; Nebot Giralt, Ariadna; Caudron, Jean Michel; Schiavetti, Benedetta; Pouget, Corinne; Tsoumanis, Achilleas; Meessen, Bruno; Ravinetto, Raffaella

2018-01-01

The rapid globalisation of the pharmaceutical production and distribution has not been supported by harmonisation of regulatory systems worldwide. Thus, the supply systems in low-income and middle-income countries (LMICs) remain exposed to the risk of poor-quality medicines. To contribute to estimating this risk in the private sector in LMICs, we assessed the quality assurance system of a convenient sample of local private pharmaceutical distributors. This descriptive study uses secondary data derived from the audits conducted by the QUAMED group at 60 local private pharmaceutical distributors in 13 LMICs. We assessed the distributors' compliance with good distribution practices (GDP), general quality requirements (GQR) and cold chain management (CCM), based on an evaluation tool inspired by the WHO guidelines 'Model Quality Assurance System (MQAS) for procurement agencies'. Descriptive statistics describe the compliance for the whole sample, for distributors in sub-Saharan Africa (SSA) versus those in non-SSA, and for those in low-income countries (LICs) versus middle-income countries (MICs). Local private pharmaceutical distributors in our sample were non-compliant, very low-compliant or low-compliant for GQR (70%), GDP (60%) and CCM (41%). Only 7/60 showed good to full compliance for at least two criteria. Observed compliance varies by geographical region and by income group: maximum values are higher in non-SSA versus SSA and in MICs versus LICs, while minimum values are the same across different groups. The poor compliance with WHO quality standards observed in our sample indicates a concrete risk that patients in LMICs are exposed to poor-quality or degraded medicines. Significant investments are needed to strengthen the regulatory supervision, including on private pharmaceutical distributors. An adapted standardised evaluation tool inspired by the WHO MQAS would be helpful for self-evaluation, audit and inspection purposes.

Compliance with driver's license laws and illegal licensing among commercial bus drivers in Lagos, Nigeria: policy implications and evidence for action.

PubMed

Okafor, I P; Odeyemi, K A; Dolapo, D C; Adegbola, A A

2014-09-01

To determine the level of compliance with driver's license laws among commercial bus drivers in Lagos, Nigeria. Two intercity motor parks were selected by simple random sampling and all consenting minibus drivers participated in the study. Key Informant Interviews (KIIs) were also conducted with selected officials in the driver training and licensing authorities. Compliance with the minimum age for driving was high (93.6%), so also was having driving test prior to driver's license procurement (83.3%). Formal driver training and VA testing were very low, (26.1% and 32.9% respectively) Overall, only 9.3% of them were found to have fulfilled all the pre-license obligations before obtaining their first driver's license. The odds of a driver with a secondary education having formal driver training is 3.33 times higher than those with no education (OR 3.33, 95% CI 1.01-11.35). Drivers who were 60 years or older were 3.62 times more likely to be compliant than those who were between 20-29 years (OR 3.62, 95% CI 0.56-29.19). For the 98.3% of them who possessed valid licenses, 52.3% of them obtained them illegally. All the key officials saw RTIs as a serious public health problem but faced several challenges in the course of their work. Overall compliance with pre-license regulations was very poor. There is need for a review and strict enforcement of driver's license laws to improve compliance. Also vital are fostering inter-sectoral collaboration and improvement in the operations of all establishments involved in driver training and license procurement in Nigeria.

The relationship between gestational age and compliance in human umbilical vein and its possible application in vascular grafting.

PubMed

Li, Wenchun; Huang, Tiezhu; Zeng, Yanjun; Yao, Zhongjun

2006-03-01

The aim of this study was to provide a theoretical basis, using biomechanical properties, for the clinical application of human umbilical vein (HUV) as material for vascular grafting. This was a nonrandomized, non-controlled in vitro study. The experiment was conducted in the Laboratory of Medical Biomechanics, Yunyang Medical College. HUVs of 50 normal fetuses were collected on spontaneous miscarriage or labor with the pregnant women's permission by the Department of Obstetrics and Gynecology, Taihe Hospital, Shiyan, Hubei Province. Gestational aged ranged 24-42 weeks, and parturients were 20-30 years old. The pressure-volume (P-V) relationship of HUV was measured on the biomechanical experiment stand for soft tissues, and then compliance was calculated. The P-V relationship of HUV corresponded to a parabolic curve. The compliance of HUV increased gradually with gestational age [24-27 weeks (2.22+/-0.34) x 10(-4) mL/(kPa * cm), 28-32 weeks (3.65+/-0.46) x 10(-4) mL/(kPa * cm), 33-36 weeks (4.22+/-0.55) x 10(-4) mL/(kPa * cm), 37 weeks (7.63+/-0.48) x 10(-4) mL/(kPa * cm), 38 weeks (8.32+/-0.76) x 10(-4) mL/(kPa * cm)]. However, after 39 weeks of gestation, compliance decreased gradually with gestational age [39 weeks 7.61+/-0.46) x 10(-4) mL/(kPa * cm), 40 weeks (7.53+/-0.72) x 10(-4) mL/(kPa * cm), 41 weeks (4.13+/-0.35) x 10(-4) mL/(kPa * cm), 42 weeks (2.25+/-0.62) x 10(-4) mL/(kPa * cm)]. The compliance of HUVs collected at 37-40 weeks of gestational age was similar. When the HUVs older than 42 weeks or under 28 weeks were compared, there was significant difference in their compliance (F=65.84-86.52, p<0.01). The results of the present study suggest that HUVs collected at 37-40 weeks of gestational age have good compliance, i.e., a good P-V relationship, and therefore may be a suitable material for vascular grafting. HUV is one of several graft materials that may be used when autogenous saphenous vein is absent or inadequate. HUV is very biocompatible and shows promise for use in orthopedic implants.

Temperature dependence of creep compliance of highly cross-linked epoxy: A molecular simulation study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khabaz, Fardin, E-mail: rajesh.khare@ttu.edu; Khare, Ketan S., E-mail: rajesh.khare@ttu.edu; Khare, Rajesh, E-mail: rajesh.khare@ttu.edu

2014-05-15

We have used molecular dynamics (MD) simulations to study the effect of temperature on the creep compliance of neat cross-linked epoxy. Experimental studies of mechanical behavior of cross-linked epoxy in literature commonly report creep compliance values, whereas molecular simulations of these systems have primarily focused on the Young’s modulus. In this work, in order to obtain a more direct comparison between experiments and simulations, atomistically detailed models of the cross-linked epoxy are used to study their creep compliance as a function of temperature using MD simulations. The creep tests are performed by applying a constant tensile stress and monitoring themore » resulting strain in the system. Our results show that simulated values of creep compliance increase with an increase in both time and temperature. We believe that such calculations of the creep compliance, along with the use of time temperature superposition, hold great promise in connecting the molecular insight obtained from molecular simulation at small length- and time-scales with the experimental behavior of such materials. To the best of our knowledge, this work is the first reported effort that investigates the creep compliance behavior of cross-linked epoxy using MD simulations.« less

Impact of cigarette minimum price laws on the retail price of cigarettes in the USA.

PubMed

Tynan, Michael A; Ribisl, Kurt M; Loomis, Brett R

2013-05-01

Cigarette price increases prevent youth initiation, reduce cigarette consumption and increase the number of smokers who quit. Cigarette minimum price laws (MPLs), which typically require cigarette wholesalers and retailers to charge a minimum percentage mark-up for cigarette sales, have been identified as an intervention that can potentially increase cigarette prices. 24 states and the District of Columbia have cigarette MPLs. Using data extracted from SCANTRACK retail scanner data from the Nielsen company, average cigarette prices were calculated for designated market areas in states with and without MPLs in three retail channels: grocery stores, drug stores and convenience stores. Regression models were estimated using the average cigarette pack price in each designated market area and calendar quarter in 2009 as the outcome variable. The average difference in cigarette pack prices are 46 cents in the grocery channel, 29 cents in the drug channel and 13 cents in the convenience channel, with prices being lower in states with MPLs for all three channels. The findings that MPLs do not raise cigarette prices could be the result of a lack of compliance and enforcement by the state or could be attributed to the minimum state mark-up being lower than the free-market mark-up for cigarettes. Rather than require a minimum mark-up, which can be nullified by promotional incentives and discounts, states and countries could strengthen MPLs by setting a simple 'floor price' that is the true minimum price for all cigarettes or could prohibit discounts to consumers and retailers.

Compliance with the International Code of Marketing of breast-milk substitutes: an observational study of pediatricians' waiting rooms.

PubMed

Dodgson, Joan E; Watkins, Amanda L; Bond, Angela B; Kintaro-Tagaloa, Cheryl; Arellano, Alondra; Allred, Patrick A

2014-04-01

Abstract The importance of breastmilk as a primary preventative intervention is widely known and understood by most healthcare providers. The actions or non-actions that heathcare providers take toward promoting and supporting breastfeeding families make a difference in the success and duration of breastfeeding. Recognizing this relationship, the World Health Organization developed the International Code of Marketing of Breast-milk Substitutes (the Code), which defines best practices in breastfeeding promotion, including physicians' offices. The pediatric practices' waiting rooms are often a family's first experience with pediatric care. The specific aims of this study were to describe (1) Code compliance, (2) the demographic factors affecting the Code compliance, and (3) the amount and type of breastfeeding-supportive materials available in the pediatricians' waiting rooms. An observational cross-sectional design was used to collect data from 163 (82%) of the pediatric practices in Maricopa County, Arizona. None of the 100 waiting rooms that had any materials displayed (61%) was found to be completely Code compliant, with 81 of the offices having formula-promotional materials readily available. Waiting rooms in higher income areas offered more non-Code-compliant materials and gifts. Breastfeeding support information and materials were lacking in all but 18 (18%) offices. A positive relationship (t97=-2.31, p=0.02) occurred between the presence of breastfeeding educational materials and higher income areas. We were able to uncover some practice-related patterns that impact families and potentially undermine breastfeeding success. To move current practices toward breastfeeding-friendly physicians' offices, change is needed.

[Drug advertising and promotion: regulations and extent of compliance in five Latin American countries].

PubMed

Vacca, Claudia; Vargas, Claudia; Cañás, Martín; Reveiz, Ludovic

2011-02-01

To analyze differing regulations regarding drug promotion, and the extent of compliance as seen in samples of advertising directed to the public in Argentina, Colombia, Ecuador, Nicaragua, and Peru. A total of 683 pieces of promotional material on display in health facilities, pharmacies, and on the street were collected, 132 of which were randomly selected for analysis. The regulations governing pharmaceutical advertising, taken from official websites and interviews with regulatory officials and Ministry of Health staff in the five countries covered, were reviewed, along with their adherence to the ethical criteria of the World Health Organization (WHO). The contents of the materials in the sample were evaluated to determine their degree of compliance with national regulations and WHO recommendations on drug promotion. The countries have regulations incorporating WHO ethical criteria. Over 80% of the material analyzed included the indications for the drug, while over 70% omitted information on adverse effects. Fifty percent of the advertisements for over-the-counter (OTC) drugs on display in pharmacies listed indications not approved by the relevant health authority. In advertising in pharmacies, the risks from inadequate information were not found to differ significantly for OTC or prescription medications. Compared with materials provided in health facilities, the relative risk of the absence of information on dosage in the material distributed in pharmacies was 2.08 (confidence interval 95% 1.32-3.39). Although regulations on drug promotion and advertising in the five countries studied generally incorporate the WHO recommendations, promotional materials often fail to reflect the fact.

Preference and compliance of waterless hand-hygiene products versus soap and water.

PubMed

Carr, Michele P; Sullivan, Stefanie; Gilmore, Jenny; Rashid, Robert G

2003-09-01

To compare handwashing using traditional antimicrobial soap and water with two antimicrobial waterless hand-hygiene products for personal preference and compliance. Fifty dental and dental hygiene students were randomly chosen to participate in the study. All subjects were anonymously observed prior to the introduction of the waterless products for handwashing compliance using soap and water for 1 week. All subjects were then instructed on the use of a waterless gel and foam for handwashing. Both waterless products were used for a period of 1 week and students again were anonymously observed. A questionnaire was distributed at the conclusion of the study to determine product preference. During handwashing with soap and water, the average time the soap was in contact with the hands was 7.0 seconds. The average contact time with the gel and foam was 15.3 seconds and 20.0 seconds, respectfully. Questionnaire results indicated that the foam was significantly preferred over the gel and soap and water (54%, 28% and 16%, respectively). The foam was also significantly preferred when evaluating fragrance (52%), kindness to the skin (66%), convenience (64%) and fastest drying time (54%). Results from this study indicate that the waterless foam product was significantly preferred over the waterless gel and traditional soap and water for handwashing procedures. Since handwashing guidelines, regardless of which product used, recommend a minimum of 15 seconds to minimize the number of transient microorganisms on the hands, compliance was found only with the foam and the gel.

Quality indicators for the hospital transfusion chain: a national survey conducted in 100 dutch hospitals.

PubMed

Zijlker-Jansen, P Y; Janssen, M P; van Tilborgh-de Jong, A J W; Schipperus, M R; Wiersum-Osselton, J C

2015-10-01

The 2011 Dutch Blood Transfusion Guideline for hospitals incorporates seven internal quality indicators for evaluation of the hospital transfusion chain. The indicators aim to measure guideline compliance as shown by the instatement of a hospital transfusion committee and transfusion safety officer (structural indicators), observance of transfusion triggers and mandatory traceability of labile blood components (process indicators). Two voluntary online surveys were sent to all Dutch hospitals for operational years 2011 and 2012 to assess compliance with the guideline recommendations. Most hospitals had a hospital transfusion committee and had appointed a transfusion safety officer (TSO). In 2012, only 23% of hospitals complied with the recommended minimum of four annual transfusion committee meetings and 8 h/week for the TSO. Compliance with the recommended pretransfusion haemoglobin threshold for RBC transfusion was achieved by 90% of hospitals in over 80% of transfusions; 58% of hospitals measured the pretransfusion platelet count in over 80% of platelet transfusions and 87% of hospitals complied with the legally mandatory traceability of blood components in over 95% of transfusions. With the current blood transfusion indicators, it is feasible to monitor aspects of the quality of the hospital transfusion chain and blood transfusion practice and to assess guideline compliance. The results from this study suggest that there are opportunities for significant improvement in blood transfusion practice in the Netherlands. These indicators could potentially be used for national and international benchmarking of blood transfusion practice. © 2015 International Society of Blood Transfusion.

49 CFR 209.103 - Minimum and maximum penalties.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Minimum and maximum penalties. 209.103 Section 209... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD SAFETY ENFORCEMENT PROCEDURES Hazardous Materials Penalties Civil Penalties § 209.103 Minimum and maximum penalties. (a) A person who knowingly violates a...

49 CFR 209.103 - Minimum and maximum penalties.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Minimum and maximum penalties. 209.103 Section 209... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD SAFETY ENFORCEMENT PROCEDURES Hazardous Materials Penalties Civil Penalties § 209.103 Minimum and maximum penalties. (a) A person who knowingly violates a...

49 CFR 209.103 - Minimum and maximum penalties.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Minimum and maximum penalties. 209.103 Section 209... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD SAFETY ENFORCEMENT PROCEDURES Hazardous Materials Penalties Civil Penalties § 209.103 Minimum and maximum penalties. (a) A person who knowingly violates a...

49 CFR 209.103 - Minimum and maximum penalties.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Minimum and maximum penalties. 209.103 Section 209... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD SAFETY ENFORCEMENT PROCEDURES Hazardous Materials Penalties Civil Penalties § 209.103 Minimum and maximum penalties. (a) A person who knowingly violates a...

49 CFR 209.103 - Minimum and maximum penalties.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Minimum and maximum penalties. 209.103 Section 209... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD SAFETY ENFORCEMENT PROCEDURES Hazardous Materials Penalties Civil Penalties § 209.103 Minimum and maximum penalties. (a) A person who knowingly violates a...

40 CFR 725.455 - Information to be included in the Tier II exemption request.

Code of Federal Regulations, 2011 CFR

2011-07-01

... identification. (2) Type of genetic modification and the function of the introduced genetic material. (3) Site of insertion. (4) Certification of compliance with the introduced genetic material criteria described in § 725...

40 CFR 725.455 - Information to be included in the Tier II exemption request.

Code of Federal Regulations, 2012 CFR

2012-07-01

... identification. (2) Type of genetic modification and the function of the introduced genetic material. (3) Site of insertion. (4) Certification of compliance with the introduced genetic material criteria described in § 725...

40 CFR 725.455 - Information to be included in the Tier II exemption request.

Code of Federal Regulations, 2013 CFR

2013-07-01

... identification. (2) Type of genetic modification and the function of the introduced genetic material. (3) Site of insertion. (4) Certification of compliance with the introduced genetic material criteria described in § 725...

40 CFR 725.455 - Information to be included in the Tier II exemption request.

Code of Federal Regulations, 2014 CFR

2014-07-01

... identification. (2) Type of genetic modification and the function of the introduced genetic material. (3) Site of insertion. (4) Certification of compliance with the introduced genetic material criteria described in § 725...

16 CFR 322.9 - Recordkeeping and compliance requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... consumer files containing the names, phone numbers, dollar amounts paid, and descriptions of mortgage... scripts, training materials, commercial communications, or other marketing materials, including websites... all consumer complaints; and (iii) Ascertaining the number and nature of consumer complaints regarding...

16 CFR 322.9 - Recordkeeping and compliance requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... consumer files containing the names, phone numbers, dollar amounts paid, and descriptions of mortgage... scripts, training materials, commercial communications, or other marketing materials, including websites... all consumer complaints; and (iii) Ascertaining the number and nature of consumer complaints regarding...

14 CFR 13.71 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials Transportation Act... believe that a person is engaging in the transportation or shipment by air of hazardous materials in...

14 CFR 13.71 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials Transportation Act... believe that a person is engaging in the transportation or shipment by air of hazardous materials in...

14 CFR 13.71 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials Transportation Act... believe that a person is engaging in the transportation or shipment by air of hazardous materials in...

14 CFR 13.71 - Applicability.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials Transportation Act... believe that a person is engaging in the transportation or shipment by air of hazardous materials in...

The Effect of Aortic Compliance on Left Ventricular Power Requirement

NASA Astrophysics Data System (ADS)

Pahlevan, Niema; Gharib, Morteza

2009-11-01

Aortic compliance depends on both geometry and mechanical properties of the aorta. Reduction in arterial compliance has been associated with aging, smoking, and multiple cardiovascular diseases. Increased stiffness of the aorta affects the wave dynamics in the aorta by increasing both pulse pressure amplitude and wave speed. We hypothesized that decreased aortic compliance leads to an increased left ventricular power requirement for a fixed cardiac output due to altered pulse pressure and pulse wave velocity. We used a computational approach using the finite element method for solid and fluid domains coupled to each other by using the direct coupling method. A nonlinear material model was used for the solid wall. The fluid flow model was considered to be Newtonian, incompressible, and laminar. The simulation was performed for a heart rate of 75 beats per minute for six different compliances while keeping the cardiac output and the peripheral resistance constant. The results show a trend towards increased left ventricular energy expenditure per cycle with decreased compliance. The relevance of these findings to clinical observations will be discussed.

Assessment of Pulmonary Artery Stiffness of Repaired Congenital Heart Disease Patients

NASA Astrophysics Data System (ADS)

Lee, Namheon; Banerjee, Rajit; Taylor, Michael; Hor, Kan

2012-10-01

Surgical correction or palliation of congenital heart disease (CHD) often requires augmenting the main pulmonary artery (MPA) with non-native material or placing a cylindrical graft. The degree to which this intervention affects PA compliance is largely unknown. In this study, the MPA stiffness characteristics were assessed by its compliance, distensibility, and pressure-strain modulus. Coregistered velocity encoded phase-contrast MRI and cardiac catheterization data were available for a cohort of repaired CHD patients (n=8) and controls (n=3). All patients were repaired with either an RV-PA conduit or a RV outflow tract patch. We measured the MPA area change by MRI and MPA pressure during the cath. The measurements were taken through or just distal to the conduit. The MPA compliance and distensibility for the patients were significantly lower than the controls: compliance (9.8±10.8 vs 28.3±7.7mm^2/mmHg, p<0.05), distensibility (2.2±1.5 vs 6.6±2.1%Area change/mmHg, p=0.05). The patients had a significantly higher pressure-strain modulus (152.3±116.4mmHg, p<0.05) than the controls (35.8±10.6mmHg). The abnormally elevated PA stiffness due to the rigidity of the conduit or patch material may cause a compliance mismatch resulting in high stress levels contributing to the observed progressive PA dilatation. This may be a factor in the progressive RV dilatation seen in this cohort of repaired CHD patients.

Identification of factors involved in medication compliance: incorrect inhaler technique of asthma treatment leads to poor compliance

PubMed Central

Darbà, Josep; Ramírez, Gabriela; Sicras, Antoni; García-Bujalance, Laura; Torvinen, Saku; Sánchez-de la Rosa, Rainel

2016-01-01

Objective To identify the impact of delivery device of inhaled corticosteroids and long-acting β2-agonist (ICS/LABA) on asthma medication compliance, and investigate other factors associated with compliance. Materials and methods We conducted a retrospective and multicenter study based on a review of medical registries of asthmatic patients treated with ICS/LABA combinations (n=2,213) whose medical devices were either dry powder inhalers (DPIs, such as Accuhaler®, Turbuhaler®, and NEXThaler®) or pressurized metered-dose inhalers (pMDI). Medication compliance included persistence outcomes through 18 months and medication possession ratios. Data on potential confounders of treatment compliance such as asthma exacerbations, comorbidities, demographic characteristics, and health care resource utilization were also explored. Results The probability of asthma medication compliance in case of DPIs was lower compared to pMDIs, which suggests that inhaler devices influence inhalation therapies. There were additional confounding factors that were considered as explanatory variables of compliance. A worse measure of airflow obstruction (forced expiration volume in 1 second), comorbidities and general practitioner (GP) consultations more than once per month decreased the probability of compliance. Within comorbidities, alcoholism was positively associated with compliance. Patients of 29–39, 40–50, and 51–61 age groups or suffering from more than two exacerbations during the study period were more likely to comply with their medication regime. The effects of DPIs toward compliance varied with the different DPIs. For instance, Accuhaler® had a greater negative effect on compliance compared to Turbuhaler® and Nexthaler® in cases of patients who suffered exacerbations. We found that GP consultations reduced the probability of medication compliance for patients treated with formoterol/budesonide combination. For retired patients, visiting the GP increased the probability of medication compliance. Conclusion We concluded that inhaler devices influence patients’ compliance for long-term asthma medication. The impact of Accuhaler®, Turbuhaler®, and NEXThaler® on medication compliance was negative. We also identified some confounders of medication compliance such as patient’s age, severity of asthma, comorbidities, and health care costs. PMID:26929605

49 CFR 179.220-7 - Materials.

Code of Federal Regulations, 2013 CFR

2013-10-01

... indicated minimum tensile strength and elongation in the welded condition. (b) Carbon steel plate: The...) High alloy steel plate: High alloy steel plate must comply with one of the following specifications... Minimum tensile strength (p.s.i.) welded condition 1 Minimum elongation in 2 inches (percent) weld metal...

49 CFR 179.220-7 - Materials.

Code of Federal Regulations, 2012 CFR

2012-10-01

... indicated minimum tensile strength and elongation in the welded condition. (b) Carbon steel plate: The...) High alloy steel plate: High alloy steel plate must comply with one of the following specifications... Minimum tensile strength (p.s.i.) welded condition 1 Minimum elongation in 2 inches (percent) weld metal...

49 CFR 179.220-7 - Materials.

Code of Federal Regulations, 2011 CFR

2011-10-01

... indicated minimum tensile strength and elongation in the welded condition. (b) Carbon steel plate: The...) High alloy steel plate: High alloy steel plate must comply with one of the following specifications... Minimum tensile strength (p.s.i.) welded condition 1 Minimum elongation in 2 inches (percent) weld metal...

49 CFR 179.220-7 - Materials.

Code of Federal Regulations, 2014 CFR

2014-10-01

... indicated minimum tensile strength and elongation in the welded condition. (b) Carbon steel plate: The...) High alloy steel plate: High alloy steel plate must comply with one of the following specifications... Minimum tensile strength (p.s.i.) welded condition 1 Minimum elongation in 2 inches (percent) weld metal...

Methods and apparatus for moving and separating materials exhibiting different physical properties

DOEpatents

Peterson, Stephen C.; Brimhall, Owen D.; McLaughlin, Thomas J.; Baker, Charles D.; Sparks, Sam L.

1991-01-01

Methods and apparatus for controlling the movement of materials having different physical properties when one of the materials is a fluid. The invention does not rely on flocculation, sedimentation, centrifugation, the buoyancy of the materials, or any other gravity dependent characteristic, in order to achieve its desired results. The methods of the present invention provide that a first acoustic wave is propagated through a vessel containing the materials. A second acoustic wave, at a frequency different than the first acoustic wave, is also propagated through the vessel so that the two acoustic waves are superimposed upon each other. The superimposition of the two waves creates a beat frequency wave. The beat frequency wave comprises pressure gradients dividing regions of maximum and minimum pressure. The pressure gradients and the regions of maximum and minimum pressure move through space and time at a group velocity. The moving pressure gradients and regions of maximum and minimum pressure act upon the materials so as to move one of the materials towards a predetermined location in the vessel. The present invention provides that the materials may be controllably moved toward a location, aggregated at a particular location, or physically separated from each other.

Final Report for the Testing of the Y-12 Criticality Accident Alarm System Detectors at the Godiva IV Burst Reactor (IER-443)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scorby, John C.; Hickman, David; Hudson, Becka

This report documents the experimental conditions and final results for the performance testing of the Y-12 Criticality Accident Alarm System (CAAS) detectors at the Godiva IV Burst Reactor at the National Criticality Experimental Research Center (NCERC) at the Nevada National Security Site (NNSS). The testing followed a previously issued test plan and was conducted during the week of July 17, 2017, with completion on Thursday July 20. The test subjected CAAS detectors supplied by Y-12 to very intense and short duration mixed neutron and gamma radiation fields to establish compliance to maximum radiation and minimum pulse width requirements. ANSI/ANS- 8.3.1997more » states that the “system shall be sufficiently robust as to actuate an alarm signal when exposed to the maximum radiation expected”, which has been defined at Y-12, in Documented Safety Analyses (DSAs), to be a dose rate of 10 Rad/s. ANSI/ANS-8.3.1997 further states that “alarm actuation shall occur as a result of a minimum duration transient” which may be assumed to be 1 msec. The pulse widths and dose rates provided by each burst during the test exceeded those requirements. The CAAS detectors all provided an immediate alarm signal and remained operable after the bursts establishing compliance to the requirements and fitness for re-deployment at Y-12.« less

40 CFR 63.3161 - How do I demonstrate initial compliance?

Code of Federal Regulations, 2012 CFR

2012-07-01

... operations plus all coatings and thinners, except for deadener materials and for adhesive and sealer materials that are not components of glass bonding systems, used in coating operations added to the affected..., density, and volume used must be determined for each material added to the tank or system during each...

40 CFR 63.3161 - How do I demonstrate initial compliance?

Code of Federal Regulations, 2010 CFR

2010-07-01

... operations plus all coatings and thinners, except for deadener materials and for adhesive and sealer materials that are not components of glass bonding systems, used in coating operations added to the affected..., density, and volume used must be determined for each material added to the tank or system during each...

40 CFR 63.3161 - How do I demonstrate initial compliance?

Code of Federal Regulations, 2014 CFR

2014-07-01

... operations plus all coatings and thinners, except for deadener materials and for adhesive and sealer materials that are not components of glass bonding systems, used in coating operations added to the affected..., density, and volume used must be determined for each material added to the tank or system during each...

76 FR 80410 - Advisory Committee on Reactor Safeguards; Meeting of the ACRS Subcommittee on Radiation...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-23

... Compliance with Packaging Requirements for Shipment and Receipt of Radioactive Material.'' The Subcommittee... Subcommittee on Radiation Protection and Nuclear Materials; Notice of Meeting The ACRS Subcommittee on Radiation Protection and Nuclear Materials will hold a meeting on January 18, 2012, Room T-2B3, 11545...

Concurrent optimization of material spatial distribution and material anisotropy repartition for two-dimensional structures

NASA Astrophysics Data System (ADS)

Ranaivomiarana, Narindra; Irisarri, François-Xavier; Bettebghor, Dimitri; Desmorat, Boris

2018-04-01

An optimization methodology to find concurrently material spatial distribution and material anisotropy repartition is proposed for orthotropic, linear and elastic two-dimensional membrane structures. The shape of the structure is parameterized by a density variable that determines the presence or absence of material. The polar method is used to parameterize a general orthotropic material by its elasticity tensor invariants by change of frame. A global structural stiffness maximization problem written as a compliance minimization problem is treated, and a volume constraint is applied. The compliance minimization can be put into a double minimization of complementary energy. An extension of the alternate directions algorithm is proposed to solve the double minimization problem. The algorithm iterates between local minimizations in each element of the structure and global minimizations. Thanks to the polar method, the local minimizations are solved explicitly providing analytical solutions. The global minimizations are performed with finite element calculations. The method is shown to be straightforward and efficient. Concurrent optimization of density and anisotropy distribution of a cantilever beam and a bridge are presented.

(Docket A-93-02) Category II-F: Interagency Review Materials

EPA Pesticide Factsheets

This Index lists Interagency review materials related to the decision to certify that DOE had met the compliance criteria established by EPA in 40 CFR Part 194 and the disposal regulations set by EPA in 40 CFR Part 191.

75 FR 43612 - Pipeline Safety: Request for Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-26

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2010-0042] Pipeline Safety: Request for Special Permit AGENCY: Pipeline and Hazardous Materials..., Inc., a natural gas pipeline operator, seeking relief from compliance with certain requirements in the...

77 FR 34458 - Pipeline Safety: Requests for Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-11

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2012-0112] Pipeline Safety: Requests for Special Permit AGENCY: Pipeline and Hazardous Materials... BreitBurn Energy Company LP, two natural gas pipeline operators, seeking relief from compliance with...

75 FR 66425 - Pipeline Safety: Request for Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-28

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2010-0124] Pipeline Safety: Request for Special Permit AGENCY: Pipeline and Hazardous Materials... Company, LP, a natural gas pipeline operator, seeking relief from compliance with certain requirements in...

Current Use of Underage Alcohol Compliance Checks by Enforcement Agencies in the U.S.

PubMed Central

Erickson, Darin J.; Lenk, Kathleen M.; Sanem, Julia R.; Nelson, Toben F.; Jones-Webb, Rhonda; Toomey, Traci L.

2014-01-01

Background Compliance checks conducted by law enforcement agents can significantly reduce the likelihood of illegal alcohol sales to underage individuals, but these checks need to be conducted using optimal methods to maintain effectiveness. Materials and Methods We conducted a national survey of local and state enforcement agencies in 2010–2011 to assess: (1) how many agencies are currently conducting underage alcohol compliance checks, (2) how many agencies that conduct compliance checks use optimal methods—including checking all establishments in the jurisdiction, conducting checks at least 3–4 times per year, conducting follow-up checks within 3 months, and penalizing the licensee (not only the server/clerk) for failing a compliance check, and (3) characteristics of the agencies that conduct compliance checks. Results Just over one third of local law enforcement agencies and over two thirds of state agencies reported conducting compliance checks. However, only a small percentage of the agencies (4–6%) reported using all of the optimal methods to maximize effectiveness of these compliance checks. Local law enforcement agencies with an alcohol-related division, those with at least one full-time officer assigned to work on alcohol, and those in larger communities were significantly more likely to conduct compliance checks. State agencies with more full-time agents and those located in states where the state agency or both state and local enforcement agencies have primary responsibility (vs. only the local law agency) for enforcing alcohol retail laws were also more likely to conduct compliance checks; however, these agency characteristics did not remain statistically significant in the multivariate analyses. Conclusions Continued effort is needed to increase the number of local and state agencies conducting compliance checks using optimal methods to reduce youth access to alcohol. PMID:24716443

Compliance to treatment in patients with chronic illness: A concept exploration

PubMed Central

Rafii, Forough; Fatemi, Naima Seyed; Danielson, Ella; Johansson, Christina Melin; Modanloo, Mahnaz

2014-01-01

Background: Patients’ compliance to treatment is an important indicator for evaluating the successful management in chronic illnesses. Despite the fact an applicable definition of compliance is required to suitable intervention and research, this concept is not clear and there is no consensus concerning its meaning, definition, and measurement. The aim of this study was to explore the concept of compliance and to formulate a working definition. Materials and Methods: Theoretical phase of Schwartz-Barcott and Kim's Hybrid Model of concept analysis was used to analyze the concept of compliance. Data were collected by using literature reviews. Medline, CINAHL, Ovid, Elsevier, Pro Quest and Blackwell databases were searched from 1975 to 2010 using the keywords “Compliance,” “Non-compliance,” “Adherence,” and “Concordance.” Articles published in English were selected if they included adult patients with chronic illnesses and reported attributes of compliance; 23 such relevant articles were chosen. Results: The attributes of compliance included patient obedience, ability to implement medical advice, flexibility, responsibility, collaboration, participation, and persistence in implementing the advices. Antecedents are organized into two interacting categories: Internal factors refer to the patient, disease, and treatment characteristics and external factors refer to the healthcare professionals, healthcare system, and socioeconomic factors. Compliance may lead to desirable and undesirable consequences. A working definition of compliance was formulated by comparing and contrasting the existing definitions with regard to its attributes which are useful in clinical practice and research. Conclusions: This finding will be useful in clinical practice and research. But this working definition has to be tested in a clinical context and a broad view of its applicability has to be obtained. PMID:24834085

Vibration Influences Haptic Perception of Surface Compliance During Walking

PubMed Central

Visell, Yon; Giordano, Bruno L.; Millet, Guillaume; Cooperstock, Jeremy R.

2011-01-01

Background The haptic perception of ground compliance is used for stable regulation of dynamic posture and the control of locomotion in diverse natural environments. Although rarely investigated in relation to walking, vibrotactile sensory channels are known to be active in the discrimination of material properties of objects and surfaces through touch. This study investigated how the perception of ground surface compliance is altered by plantar vibration feedback. Methodology/Principal Findings Subjects walked in shoes over a rigid floor plate that provided plantar vibration feedback, and responded indicating how compliant it felt, either in subjective magnitude or via pairwise comparisons. In one experiment, the compliance of the floor plate was also varied. Results showed that perceived compliance of the plate increased monotonically with vibration feedback intensity, and depended to a lesser extent on the temporal or frequency distribution of the feedback. When both plate stiffness (inverse compliance) and vibration amplitude were manipulated, the effect persisted, with both factors contributing to compliance perception. A significant influence of vibration was observed even for amplitudes close to psychophysical detection thresholds. Conclusions/Significance These findings reveal that vibrotactile sensory channels are highly salient to the perception of surface compliance, and suggest that correlations between vibrotactile sensory information and motor activity may be of broader significance for the control of human locomotion than has been previously acknowledged. PMID:21464979

UMTRA project list of reportable occurrences

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-04-01

This UMTRA Project List of Reportable occurrences is provided to facilitate efficient categorization of reportable occurrences. These guidelines have been established in compliance with DOE minimum reporting requirements under DOE Order 5000.3B. Occurrences are arranged into nine groups relating to US Department of Energy (DOE) Uranium Mill Tailings Remedial Action (UMTRA) Project operations for active sites. These nine groupings are provided for reference to determined whether an occurrence meets reporting requirement criteria in accordance with the minimum reporting requirements. Event groups and significance categories that cannot or will not occur, and that do not apply to UMTRA Project operations, aremore » omitted. Occurrence categorization shall be as follows: Group 1. Facility Condition; Group 2. Environmental; Group 3. Personnel Safety; Group 4. Personnel Radiation Protection; Group 5. Safeguards and Security; Group 6. Transportation; Group 7. Value Basis Reporting; Group 8. Facility Status; and Group 9. Cross-Category Items.« less

Compliance of Saudi dental students with infection control guidelines.

PubMed

Ahmad, Ibrahim Ali; Rehan, Elaf Ali; Pani, Sharat Chandra

2013-08-01

The aim of this study was to investigate compliance of dental students in a Saudi dental school with recommended infection control protocols. A pilot-tested questionnaire concerning various aspects of infection control practices was distributed to 330 dental students. The response rate was 93.9% (n = 311). About 99% of students recorded the medical history of their patients and 80% were vaccinated against hepatitis B. The highest compliance (100%) with recommended guidelines was reported for wearing gloves and use of a new saliva ejector for each patient. Over 90% of the respondents changed gloves between patients, wore face masks, changed hand instruments, burs and handpieces between patients, used a rubber dam in restorative procedures and discarded sharp objects in special containers. A lower usage rate was reported for changing face masks between patients (81%), disinfecting impression materials (87%) and dental prosthesis (74%) and wearing gowns (57%). Eye glasses and face shield were used by less than one-third of the sample. The majority of students were found to be in compliance with most of the investigated infection control measures. Nevertheless, further education is needed to improve some infection control measures including vaccination for Hepatitis B virus (HBV), wearing eye glasses, gowns and face shields and disinfecting impression materials and dental prostheses. © 2013 FDI World Dental Federation.

Organ procurement organization compliance with 21 CFR 1271: a challenge for allogeneic pancreatic islet cell transplantation programs.

PubMed

Winters, J L; Tran, S A; Gastineau, D A; Padley, D J; Dean, P G; Kudva, Y C

2009-06-01

In order to protect tissue recipients, the Food and Drug Administration drafted Title 21, Section 1271 of the Code of Federal Regulations 1271 (21 CFR 1271) to address infectious disease risk. These regulations apply to tissues but not vascularized organs. Pancreatic islet cells are regulated under 21 CFR 1271. These regulations require qualification of suppliers of critical materials and services with regard to 21 CFR 1271 compliance. As part of supplier qualification, all organ procurement organizations (OPOs) in the United States were sent a questionnaire covering the key components of these regulations. Of the 57 OPOs, 29 (51%) were in compliance based upon survey results. Twelve (21%) were not compliant in one or more areas. All indicated plans to become compliant. The remaining 15 (27%) either failed or refused to complete the survey, some indicating 21 CFR 1271 did not apply to OPOs. Using 2006 data, OPOs compliant with 21 CFR 1271 recovered 50% of the organs procured in the United States. These findings represent a challenge for allogeneic islet cell transplant programs whose raw material must comply with 21 CFR 1271. OPOs should work toward understanding and complying with 21 CFR 1271. Regulatory agencies should work toward enhancing safety of the pancreas supply by facilitating compliance through harmonization of requirements.

Using wood creep data to discuss the contribution of cell-wall reinforcing material.

PubMed

Gril, Joseph; Hunt, David; Thibaut, Bernard

2004-01-01

Longitudinal four-point creep bending tests were performed on small clear-wood spruce specimens having various microfibrillar angles. Cell-wall compliance was deduced from macroscopic data by accounting for porosity. Time-dependent compliance was converted into complex compliance and rigidity using the value and the slope of the compliance versus logarithm of time. Complex rigidity plots of all specimens, for the time range 10(3)-10(6) s, could be superimposed by a horizontal shift depending on the microfibrillar angle. The shape of complex trajectories allowed a decomposition of the cell-wall relaxation modulus as the sum of an elastic contribution function of the microfibrillar angle and a time-dependent term unrelated to it, and suggested a discussion on the contribution of the various cell-wall layers to the observed relaxation process.

10 CFR 171.11 - Exemptions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... LICENSES, INCLUDING HOLDERS OF CERTIFICATES OF COMPLIANCE, REGISTRATIONS, AND QUALITY ASSURANCE PROGRAM...) Remunerated services to other persons; (iii) Distribution of byproduct material, source material, or special... following factors: (1) Age of the reactor; (2) Number of customers in rate base; (3) Net increase in KWh...

Measuring tactile cues at the fingerpad for object compliances harder and softer than the skin

PubMed Central

Hauser, Steven C.; Gerling, Gregory J.

2016-01-01

Distinguishing an object’s compliance, into percepts of “softness” and “hardness,” is crucial to our ability to grasp and manipulate it. Biomechanical cues at the skin’s surface such as contact area and force rate have been thought to help encode compliance. However, no one has directly measured contact area with compliant materials, and few studies have considered compliances softer than the fingerpad. Herein, we developed a novel method to precisely measure the area in contact between compliant stimuli and the fingerpad, at given levels of force and displacement. To determine the method’s robustness, we conducted psychophysical and biomechanical experiments with human subjects. The results indicate that cues including contact area at stimulus peak force of 3 Newtons, force rate over stimulus movement and at peak force, displacement and/or time to reach peak force may help in discriminating compliances while the directional spread of contact area is less important. Between softer and harder compliances, some cues were slightly more evident, though not yet definitively. Based upon the method’s utility, the next step is to conduct broader experiments to distill the mixture of cues that encode compliance. The importance of such work lies in building haptic displays, for example, to render virtual tissues. PMID:27331072

Methods and apparatus for moving and separating materials exhibiting different physical properties

DOEpatents

Peterson, Stephen C.; Brimhall, Owen D.; McLaughlin, Thomas J.; Baker, Charles D.; Sparks, Sam L.

1988-01-01

Methods and apparatus for controlling the movement of materials having different physical properties when one of the materials is a fluid. The invention does not rely on flocculation, sedimentation, centrifugation, the buoyancy of the materials, or any other gravity dependent characteristic, in order to achieve its desired results. The methods of the present invention provide that a first acoustic wave is progpagated through a vessel containing the materials. A second acoustic wave, at a frequency different than the first acoustic wave, is also propagated through the vessel so that the two acoustic waves are superimposed upon each other. The superimposition of the two waves creates a beat frequency wave. The beat frequency wave comprises pressure gradients dividing regions of maximum and minimum pressure. The pressure gradients and the regions of maximum and minimum pressure move through space and time at a group velocity. The moving pressure gradients and regions of maximum and minimum pressure act upon the marterials so as to move one of the materials towards a predetermined location in the vessel. The present invention provides that the materials may be controllably moved toward a location, aggreated at a particular location, or physically separated from each other.