Single-Cycle Versus Multicycle Proof Testing

NASA Technical Reports Server (NTRS)

Hudak, S. J., Jr.; Mcclung, R. C.; Bartlett, M. L.; Fitzgerald, J. H.; Russell, D. A.

1992-01-01

Report compares single-cycle with multiple-cycle mechanical-stress tests of parts under mechanical stresses. Objective of proof testing: to screen out gross manufacturing or material deficiencies and provide additional assurance of quality. Report concludes that changes in distribution of crack sizes during multicycle proof testing depend on initial distribution, number of cycles, relationship between resistance of material and elastic/plastic fracture-mechanics parameter, relationship between load control and displacement control, and magnitude of applied load or displacement. Whether single-cycle or multicycle testing used depends on shape, material, and technique of fabrication of components tested.

Cryogenic Quenching Process for Electronic Part Screening

NASA Technical Reports Server (NTRS)

Sheldon, Douglas J.; Cressler, John

2011-01-01

The use of electronic parts at cryogenic temperatures (less than 100 C) for extreme environments is not well controlled or developed from a product quality and reliability point of view. This is in contrast to the very rigorous and well-documented procedures to qualify electronic parts for mission use in the 55 to 125 C temperature range. A similarly rigorous methodology for screening and evaluating electronic parts needs to be developed so that mission planners can expect the same level of high reliability performance for parts operated at cryogenic temperatures. A formal methodology for screening and qualifying electronic parts at cryogenic temperatures has been proposed. The methodology focuses on the base physics of failure of the devices at cryogenic temperatures. All electronic part reliability is based on the bathtub curve, high amounts of initial failures (infant mortals), a long period of normal use (random failures), and then an increasing number of failures (end of life). Unique to this is the development of custom screening procedures to eliminate early failures at cold temperatures. The ability to screen out defects will specifically impact reliability at cold temperatures. Cryogenic reliability is limited by electron trap creation in the oxide and defect sites at conductor interfaces. Non-uniform conduction processes due to process marginalities will be magnified at cryogenic temperatures. Carrier mobilities change by orders of magnitude at cryogenic temperatures, significantly enhancing the effects of electric field. Marginal contacts, impurities in oxides, and defects in conductor/conductor interfaces can all be magnified at low temperatures. The novelty is the use of an ultra-low temperature, short-duration quenching process for defect screening. The quenching process is designed to identify those defects that will precisely (and negatively) affect long-term, cryogenic part operation. This quenching process occurs at a temperature that is at least 25 C colder than the coldest expected operating temperature. This quenching process is the opposite of the standard burn-in procedure. Normal burn-in raises the temperature (and voltage) to activate quickly any possible manufacturing defects remaining in the device that were not already rejected at a functional test step. The proposed inverse burn-in or quenching process is custom-tailored to the electronic device being used. The doping profiles, materials, minimum dimensions, interfaces, and thermal expansion coefficients are all taken into account in determining the ramp rate, dwell time, and temperature.

Rapid and Accurate Machine Learning Recognition of High Performing Metal Organic Frameworks for CO2 Capture.

PubMed

Fernandez, Michael; Boyd, Peter G; Daff, Thomas D; Aghaji, Mohammad Zein; Woo, Tom K

2014-09-04

In this work, we have developed quantitative structure-property relationship (QSPR) models using advanced machine learning algorithms that can rapidly and accurately recognize high-performing metal organic framework (MOF) materials for CO2 capture. More specifically, QSPR classifiers have been developed that can, in a fraction of a section, identify candidate MOFs with enhanced CO2 adsorption capacity (>1 mmol/g at 0.15 bar and >4 mmol/g at 1 bar). The models were tested on a large set of 292 050 MOFs that were not part of the training set. The QSPR classifier could recover 945 of the top 1000 MOFs in the test set while flagging only 10% of the whole library for compute intensive screening. Thus, using the machine learning classifiers as part of a high-throughput screening protocol would result in an order of magnitude reduction in compute time and allow intractably large structure libraries and search spaces to be screened.

Tension fracture of laminates for transport fuselage. Part 1: Material screening

NASA Technical Reports Server (NTRS)

Walker, T. H.; Avery, W. B.; Ilcewicz, L. B.; Poe, C. C., Jr.; Harris, C. E.

1992-01-01

Transport fuselage structures are designed to contain pressure following a large penetrating damage event. Applications of composites to fuselage structures require a database and supporting analysis on tension damage tolerance. Tests with 430 fracture specimens were used to accomplish the following: (1) identify critical material and laminate variables affecting notch sensitivity; (2) evaluate composite failure criteria; and (3) recommend a screening test method. Variables studied included fiber type, matrix toughness, lamination manufacturing process, and intraply hybridization. The laminates found to have the lowest notch sensitivity were manufactured using automated tow placement. This suggests a possible relationship between the stress distribution and repeatable levels of material inhomogeneity that are larger than found in traditional tape laminates. Laminates with the highest notch sensitivity consisted of toughened matrix materials that were resistant to a splitting phenomena that reduces stress concentrations in major load bearing plies. Parameters for conventional fracture criteria were found to increase with crack length for the smallest notch sizes studied. Most material and laminate combinations followed less than a square root singularity for the largest crack sizes studied. Specimen geometry, notch type, and notch size were evaluated in developing a screening test procedure. Traitional methods of correcting for specimen finite width were found to be lacking. Results indicate that a range of notch sizes must be tested to determine notch sensitivity. Data for a single small notch size (0.25 in. diameter) was found to give no indication of the sensitivity of a particular material and laminate layup to larger notch sizes.

Strong modification of thin film properties due to screening across the interface

NASA Astrophysics Data System (ADS)

Altendorf, S. G.; Reisner, A.; Tam, B.; Meneghin, F.; Wirth, S.; Tjeng, L. H.

2018-04-01

We report on our investigation of the influence of screening across the interface on the properties of semiconducting thin films. Using EuO as a well-defined model material, layers of various thickness deposited on yttria-stabilized zirconia (100) substrates were covered half with Mg metal and half with the wide-band-gap insulator MgO. We observed that the Curie temperature for the thinnest films is significantly higher for the part which is interfaced with the metal compared to the part which is interfaced with the insulator. We infer that the proximity of a polarizable medium reduces the energies of virtual charge excitations and thus increases the effective exchange interactions, a strong effect that can be utilized systematically for the design of thin film and multilayer systems.

Parts, materials, and processes experience summary, volume 2. [design, engineering, and quality control

NASA Technical Reports Server (NTRS)

1973-01-01

This summary provides the general engineering community with the accumulated experience from ALERT reports issued by NASA and the Government-Industry. Data Exchange Program, and related experience gained by Government and industry. It provides expanded information on selected topics by relating the problem area (failure) to the cause, the investigation and findings, the suggestions for avoidance (inspections, screening tests, proper part applications, requirements for manufacturer's plant facilities, etc.), and failure analysis procedures. Diodes, integrated circuits, and transistors are covered in this volume.

How to translate a bioassay into a screening assay for natural products: general considerations and implementation of antimicrobial screens.

PubMed

Fallarero, Adyary; Hanski, Leena; Vuorela, Pia

2014-09-01

Natural product sources have been a valuable provider of molecular diversity in many drug discovery programs and several therapeutically important drugs have been isolated from these. However, the screening of such materials can be very complicated due to the fact that they contain a complex mixture of secondary metabolites, but also the purified natural compounds exert a challenge for bioactivity screening. Success in identifying new therapeutics using in vitro bioassays is largely dependent upon the proper design, validation, and implementation of the screening assay. In this review, we discuss some aspects which are of significant concern when screening natural products in a microtiter plate-based format, being partly applicable to other assay formats as well, such as validation parameters, layouts for assay protocols, and common interferences caused by natural products samples, as well as various troubleshooting strategies. Examples from the field of natural product drug discovery of antibacterial compounds are discussed, and contributions from the realm of academic screenings are highlighted. Georg Thieme Verlag KG Stuttgart · New York.

Apparatus and methods for filtering granular solid material

NASA Technical Reports Server (NTRS)

Backes, Douglas J. (Inventor); Poulter, Clay B. (Inventor); Godfrey, Max R. (Inventor); Tolman, Dennis K. (Inventor); Dutton, Melinda S. (Inventor)

2011-01-01

Apparatuses for screening granular solid particulate material include a generally planar first screen and a second screen. A plurality of apertures extends through the first screen. At least a portion of the second screen is oriented at an angle to the first screen, and apertures extend through a perforated region of the second screen. The second screen includes at least one region configured to prevent at least some particles of solid material from passing through the second screen.

Composite Pulse Tube

NASA Technical Reports Server (NTRS)

Martin, Jerry L.; Cloyd, Jason H.

2007-01-01

A modification of the design of the pulse tube in a pulse-tube cryocooler reduces axial thermal conductance while preserving radial thermal conductance. It is desirable to minimize axial thermal conductance in the pulse-tube wall to minimize leakage of heat between the warm and cold ends of the pulse tube. At the same time, it is desirable to maximize radial thermal conductance at the cold end of the pulse tube to ensure adequate thermal contact between (1) a heat exchanger in the form of a stack of copper screens inside the pulse tube at the cold end and (2) the remainder of the cold tip, which is the object to which the heat load is applied and from which heat must be removed. The modified design yields a low-heat-leak pulse tube that can be easily integrated with a cold tip. A typical pulse tube of prior design is either a thin-walled metal tube or a metal tube with a nonmetallic lining. It is desirable that the outer surface of a pulse tube be cylindrical (in contradistinction to tapered) to simplify the design of a regenerator that is also part of the cryocooler. Under some conditions, it is desirable to taper the inner surface of the pulse tube to reduce acoustic streaming. The combination of a cylindrical outer surface and a tapered inner surface can lead to unacceptably large axial conduction if the pulse tube is made entirely of metal. Making the pulse-tube wall of a nonmetallic, lowthermal- conductivity material would not solve the problem because the wall would not afford the needed thermal contact for the stack of screens in the cold end. The modified design calls for fabricating the pulse tube in two parts: a longer, nonmetallic part that is tapered on the inside and cylindrical on the outside and a shorter, metallic part that is cylindrical on both the inside and the outside. The nonmetallic part can be made from G-10 fiberglass-reinforced epoxy or other low-thermal-conductivity, cryogenically compatible material. The metallic part must have high thermal conductivity in the cryogenic temperature range and would typically be made of pure copper to satisfy this requirement. The metallic part is bonded to the nonmetallic part with epoxy. Copper screens are inserted in the metallic part to form the cold-end heat exchanger, then the assembled pulse tube is inserted in the cold tip.

Changes In Mechanical Properties Of Heat Resisting Alloy For A Satellite Propulsion System After A Nitriding Process

NASA Astrophysics Data System (ADS)

Kagawa, Hideshi; Fujii, Go; Kajiwara, Kenichi; Kuroda, Daisuke; Suzuki, Takuya; Yamabe-Mitarai, Yoko; Murakami, Hideyuki; Ono, Yoshinori

2012-07-01

Haynes25 (L-605) is a common heat resistant alloy used in mono-propellant structures and screen materials for catalyst beds. The lifetime requirements for thrusters have expanded dramatically after studies conducted in the 1970s on mono-propellant materials used to extend the service life. The material design had long remained unchanged, and the L-605 was still used as thruster material due to its good heritage. However, some important incidents involving degradation were found during the test-unit break-up inspection following the thruster life tests. The Japanese research team focused on the L-605 degradations found on the catalyst bed screen mesh used for mono-propellant thruster and analysed the surface of the wire material and the cross- section of the wire screen mesh used in the life tests. The investigation showed that the degradation was caused by nitriding L-605 component elements. The team suggested that the brittle fracture was attributable to tungsten (W) carbides, which formed primarily in the grain boundaries, and chromium (Cr) nitride, which formed mainly in the parts in contact with the hot firing gas. The team also suggested the installation of a platinum coating on the material surface as a countermeasure L-605 nitric degradation. Inconel 625 is now selected as a mono-propellant structure material due to its marginal raw material characters and cost. The team believes that Inconel 625 does not form W carbides since it contains no tungsten component, but does contain Cr and Fe, which form nitrides easily. Therefore, the team agreed that for the Inconel 625, there was a need to evaluate changes in the microstructure and mechanical properties following exposure to hot nitrogen gases. This paper will describe these changes of Inconel 625.

Ultrasonic material hardness depth measurement

DOEpatents

Good, M.S.; Schuster, G.J.; Skorpik, J.R.

1997-07-08

The invention is an ultrasonic surface hardness depth measurement apparatus and method permitting rapid determination of hardness depth of shafts, rods, tubes and other cylindrical parts. The apparatus of the invention has a part handler, sensor, ultrasonic electronics component, computer, computer instruction sets, and may include a display screen. The part handler has a vessel filled with a couplant, and a part rotator for rotating a cylindrical metal part with respect to the sensor. The part handler further has a surface follower upon which the sensor is mounted, thereby maintaining a constant distance between the sensor and the exterior surface of the cylindrical metal part. The sensor is mounted so that a front surface of the sensor is within the vessel with couplant between the front surface of the sensor and the part. 12 figs.

Skills Recognition for the Rural Sector--Coming to a Screen Near You

ERIC Educational Resources Information Center

Bell, Charlie; White, Julie

2013-01-01

Tocal College, as part of New South Wales Department of Primary Industries (DPI), provides training in agriculture and related disciplines across NSW and Australia. Tocal College delivers a wide range of full time, short course, and distance education courses, along with publications and study support materials. The rural and related industries in…

Material dependence of 2H(d,p)3H cross section at the very low energies

NASA Astrophysics Data System (ADS)

Kılıç, Ali İhsan; Czerski, Konrad; Kuştan-Kılıç, Fadime; Targosz-Sleczka, Natalia; Weissbach, Daniel; Huke, Armin; Ruprecht, Götz

2017-09-01

Calculations of the material dependence of 2H(d,p)3H cross section and neutron-to-proton branching ratio of d+d reactions have been performed including a concept of the 0+ threshold single particle resonance. The resonance has been assumed to explain the enhanced electron screening effect observed in the d+d reaction for different metallic targets. Here, we have included interference effects between the flat and resonance part of the cross section, which allowed us to enlighten observed suppression of the neutron channel in some metals such as Sr and Li. Since the position of the resonance depends on the screening energy that strongly depends on the local electron density. The resonance width, observed for the d+d reactions in the very hygroscopic metals (Sr and Li) and therefore probably contaminated by oxides, should be much larger than for other metals. Thus, the interference term of the cross section depending on the total resonance width provides the material dependences.

Impact of Cardiovascular Counseling and Screening in Hodgkin Lymphoma Survivors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daniëls, Laurien A., E-mail: l.a.daniels@lumc.nl; Krol, Stijn D.G.; Graaf, Michiel A. de

Purpose: Cardiovascular disease (CVD) is the most common nonmalignant cause of death in Hodgkin lymphoma (HL) survivors, especially after mediastinal irradiation. The role of screening for CVD in HL survivors is unclear, but confrontation with risks of CVD may have a negative influence on health-related quality of life (HRQL). As part of a phase 2 screening study using computed tomography angiography (CTA) among HL survivors, an HRQL analysis was done to evaluate the emotional and practical burden and perceived benefits of screening and the effect of CVD-specific counseling on patient satisfaction. Methods and Materials: Patients who participated in the screeningmore » study also took part in the HRQL study. The impact of undergoing screening was evaluated with a 9-item questionnaire, and impact on HRQL with the European Organization for Research and Treatment of Cancer (EORTC) Quality of Life Core Questionnaire C30, version 3.0. The effect of counseling of CVD on perceived provision of information was evaluated with EORTC INFO-25. All questionnaires were completed at baseline and after screening. Results: Baseline questionnaires were received from 48 participants, and 43 completed questionnaires after screening. Mean age was 47 years, and mean time since diagnosis was 21 years. Of the total, 93% of subjects were content with participating, and 80% did not find the emphasis placed on late effects burdensome, although screening did have a small impact on social functioning and global quality of life. Perceived information on disease, medical tests, and treatment increased significantly after screening (P<.01). Differences were clinically relevant. There were no differences in perceived information between patients with and without screen-detected CVD. Conclusions: Screening was evaluated favorably, whether CTA showed abnormalities or not. Extensive counseling resulted in substantially increased provision of information and improved information satisfaction. Screening by means of CTA and subsequent cardiac intervention was highly valued, and the benefits were felt to outweigh the emotional and practical burden.« less

Low background screening capability in the UK

NASA Astrophysics Data System (ADS)

Ghag, Chamkaur

2015-08-01

Low background rare event searches in underground laboratories seeking observation of direct dark matter interactions or neutrino-less double beta decay have the potential to profoundly advance our understanding of the physical universe. Successful results from these experiments depend critically on construction from extremely radiologically clean materials and accurate knowledge of subsequent low levels of expected background. The experiments must conduct comprehensive screening campaigns to reduce radioactivity from detector components, and these measurements also inform detailed characterisation and quantification of background sources and their impact, necessary to assign statistical significance to any potential discovery. To provide requisite sensitivity for material screening and characterisation in the UK to support our rare event search activities, we have re-developed our infrastructure to add ultra-low background capability across a range of complementary techniques that collectively allow complete radioactivity measurements. Ultra-low background HPGe and BEGe detectors have been installed at the Boulby Underground Laboratory, itself undergoing substantial facility re-furbishment, to provide high sensitivity gamma spectroscopy in particular for measuring the uranium and thorium decay series products. Dedicated low-activity mass spectrometry instrumentation has been developed at UCL for part per trillion level contaminant identification to complement underground screening with direct U and Th measurements, and meet throughput demands. Finally, radon emanation screening at UCL measures radon background inaccessible to gamma or mass spectrometry techniques. With this new capability the UK is delivering half of the radioactivity screening for the LZ dark matter search experiment.

Analysis of legal high materials by ultra-performance liquid chromatography with time of flight mass spectrometry as part of a toxicology vigilance system: what are the most popular novel psychoactive substances in the UK?

PubMed

Ford, Loretta T; Berg, Jonathan D

2017-03-01

Introduction Legal highs also known as novel psychoactive substances mimic the effects of classic drugs of abuse. Challenges to developing screening services for novel psychoactive substances include identifying which novel psychoactive substances are available to target. Using new techniques such as exact mass time of flight can help identify common novel psychoactive substances to target for screening patient samples by routine methods such as tandem mass spectrometry. We demonstrate this strategy working in our own clinical toxicology laboratory after qualitative analysis of 98 suspect materials for novel psychoactive substances by ultra-performance liquid chromatography with time of flight mass spectrometry. Results From July 2014 to July 2015 we received 98 requests to test a range of different suspect materials for novel psychoactive substances including herbs, tobacco, liquids, pills and powders. Overall, 87% of the suspect materials tested positive for novel psychoactive substances, and 15% for controlled drugs. Three common novel psychoactive substances were present in 74% of the suspect materials: methiopropamine, a methamphetamine analogue; ethylphenidate, a cocaine mimic; and the third generation synthetic cannabinoid 5F-AKB-48. For the 55 branded products we tested only 24% of the stated contents matched exactly the compounds we detected. Conclusion Testing suspect materials using ultra-performance liquid chromatography with time of flight mass spectrometry has identified three common novel psychoactive substances in use in the UK, simplifying the development of a relevant novel psychoactive substances screening service to our population. By incorporating this into our routine liquid chromatography tandem mass spectrometry drugs of abuse screen, then offers a clinically relevant novel psychoactive substances service to our users. This strategy ensures our clinical toxicology service continues to remain effective to meet the challenges of the changing drug use in the UK.

Challenges and the state of the technology for printed sensor arrays for structural monitoring

NASA Astrophysics Data System (ADS)

Joshi, Shiv; Bland, Scott; DeMott, Robert; Anderson, Nickolas; Jursich, Gregory

2017-04-01

Printed sensor arrays are attractive for reliable, low-cost, and large-area mapping of structural systems. These sensor arrays can be printed on flexible substrates or directly on monitored structural parts. This technology is sought for continuous or on-demand real-time diagnosis and prognosis of complex structural components. In the past decade, many innovative technologies and functional materials have been explored to develop printed electronics and sensors. For example, an all-printed strain sensor array is a recent example of a low-cost, flexible and light-weight system that provides a reliable method for monitoring the state of aircraft structural parts. Among all-printing techniques, screen and inkjet printing methods are well suited for smaller-scale prototyping and have drawn much interest due to maturity of printing procedures and availability of compatible inks and substrates. Screen printing relies on a mask (screen) to transfer a pattern onto a substrate. Screen printing is widely used because of the high printing speed, large selection of ink/substrate materials, and capability of making complex multilayer devices. The complexity of collecting signals from a large number of sensors over a large area necessitates signal multiplexing electronics that need to be printed on flexible substrate or structure. As a result, these components are subjected to same deformation, temperature and other parameters for which sensor arrays are designed. The characteristics of these electronic components, such as transistors, are affected by deformation and other environmental parameters which can lead to erroneous sensed parameters. The manufacturing and functional challenges of the technology of printed sensor array systems for structural state monitoring are the focus of this presentation. Specific examples of strain sensor arrays will be presented to highlight the technical challenges.

Fast Neutron Tomography of Low-Z Object in High-Z Material Shielding

NASA Astrophysics Data System (ADS)

Babai, Ruth Weiss; Sabo-Napadensky, Iris; Bar, Doron; Mor, Ilan; Tamim, Noam; Dangendorf, Volker; Tittelmeier, Kai; Bromberger, Benjamin; Weierganz, Mathias

The technique and first results of Fast Neutron Tomography (FNCT) experiments are presented which are performed at the accelerator facility of PTB, Germany. A high-intensity neutron beam of broad spectral distribution with an average energy of 5.5 MeV, was produced by 11.5 MeV deuterons impinging upon a thick beryllium target. The capability of FNCT for high contrast imaging of low-Z materials embedded in thick high-Z shielding materials is demonstrated, which is superior to more conventional high-energy X-ray imaging techniques. For demonstrating the method special test objects were prepared: One consisted of an assembled polyethylene cylinder with holes of various diameters and directions drilled in its surface and inner parts. The plastic phantom was inserted into lead cylinders of different thicknesses. The detector system consisted of a plastic scintillator along with a dedicated optics, image-intensifier and a CCD camera. Two scintillator screens were compared: a bulk plastic scintillator screen and a fibres optical scintillator screen. The tomographic scans were taken in two geometrical configurations: cone beam and semi-fan beam configuration. The image quality favours the semi-fan beam configuration which on the other hand is more time consuming The obtained tomographic images and a comparison of the imaging quality between the different experimental conditions will be presented.

Use of unbalanced laminates as a screening method for microcracking

NASA Technical Reports Server (NTRS)

Papadopoulos, Demetrios S.; Bowles, Kenneth J.

1990-01-01

State-of-the-art, high temperature polyimide matrix composites, reinforced with continuous graphite fibers are known to be susceptible to intraply cracking when thermally cycled over their useful service temperature range. It is believed that the transply cracking, in part, results from residual stresses caused by differences in coefficients of thermal expansion (CTE) between the polymer matrix and the reinforcement. Thermal cycling tests to investigate this phenomenon involve expensive time and energy consuming programs which are not economically feasible for use as a part of a materials screening process. As an alternative to thermal cycling studies, a study of unbalanced crossply graphite fiber reinforcement composites was conducted to assess the effect of the composite ply layup and surface condition on the residual stresses that remain after the processing of these materials. The residual stresses were assessed by measuring the radii of curvature of the types of laminates that were studied. The temperature at which stress-free conditions existed were determined and a dye penetrant method was used to observe surface damage resulting from excessive residual stress buildup. These results are compared with some published results of thermal cycling tests that were previously conducted on balanced polyimide composites.

Screening materials with the XIA UltraLo alpha particle counter at Southern Methodist University

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nakib, M. Z.; Cooley, J.; Kara, B.

2013-08-08

Southern Methodist University houses one of five existing commercially available UltraLo 1800 production model alpha counters made by XIA LLC. The instrument has an electron drift chamber with a 707 cm{sup 2} or 1800 cm{sup 2} counting region which is determined by selecting the inner electrode size. The SMU team operating this device is part of the SuperCDMS screening working group, and uses the alpha counter to study the background rates from the decay of radon in materials used to construct the SuperCDMS experiment. We have studied four acrylic samples obtained from the MiniCLEAN direct dark matter search with themore » XIA instrument demonstrating its utility in low background experiments by investigating the plate-out of {sup 210}Pb and comparing the effectiveness of cleaning procedures in removing {sup 222}Rn progenies from the samples.« less

Parts, Materials, and Processes Control Program for Expendable Launch Vehicles

DTIC Science & Technology

2015-07-31

burn-in, electrical tests (DWV, room and hot IR, partial discharge when in corona region); perform DPA with SEM/EDX analysis of dielectric...life test; x-ray and vicinal illumination inspection; electrical tests (DWV, room and hot IR, partial discharge when in corona region) Termination...defects; proper voltage derating. Partial discharge testing, corona inception testing up to 60% of rated voltage; CSAM screening; voltage burn

Materials for stem cell factories of the future

NASA Astrophysics Data System (ADS)

Celiz, Adam D.; Smith, James G. W.; Langer, Robert; Anderson, Daniel G.; Winkler, David A.; Barrett, David A.; Davies, Martyn C.; Young, Lorraine E.; Denning, Chris; Alexander, Morgan R.

2014-06-01

Polymeric substrates are being identified that could permit translation of human pluripotent stem cells from laboratory-based research to industrial-scale biomedicine. Well-defined materials are required to allow cell banking and to provide the raw material for reproducible differentiation into lineages for large-scale drug-screening programs and clinical use. Yet more than 1 billion cells for each patient are needed to replace losses during heart attack, multiple sclerosis and diabetes. Producing this number of cells is challenging, and a rethink of the current predominant cell-derived substrates is needed to provide technology that can be scaled to meet the needs of millions of patients a year. In this Review, we consider the role of materials discovery, an emerging area of materials chemistry that is in large part driven by the challenges posed by biologists to materials scientists.

Study of extraterrestrial disposal of radioactive wastes. Part 2: Preliminary feasibility screening study of extraterrestrial disposal of radioactive wastes in concentrations, matrix materials, and containers designed for storage on earth

NASA Technical Reports Server (NTRS)

Hyland, R. E.; Wohl, M. L.; Thompson, R. L.; Finnegan, P. M.

1972-01-01

The results are reported of a preliminary feasibility screening study for providing long-term solutions to the problems of handling and managing radioactive wastes by extraterrestrial transportation of the wastes. Matrix materials and containers are discussed along with payloads, costs, and destinations for candidate space vehicles. The conclusions reached are: (1) Matrix material such as spray melt can be used without exceeding temperature limits of the matrix. (2) The cost in mills per kw hr electric, of space disposal of fission products is 4, 5, and 28 mills per kw hr for earth escape, solar orbit, and solar escape, respectively. (3) A major factor effecting cost is the earth storage time. Based on a normal operating condition design for solar escape, a storage time of more than sixty years is required to make the space disposal charge less than 10% of the bus-bar electric cost. (4) Based on a 10 year earth storage without further processing, the number of shuttle launches required would exceed one per day.

Advanced Welding Tool

NASA Technical Reports Server (NTRS)

1982-01-01

Accutron Tool & Instrument Co.'s welder was originally developed as a tool specifically for joining parts made of plastic or composite materials in any atmosphere to include the airless environment of space. Developers decided on induction or magnetic heating to avoid causing deformation and it also can be used with almost any type of thermoplastic material. Induction coil transfers magnetic flux through the plastic to a metal screen that is sandwiched between the sheets of plastic to be joined. When welder is energized, alternating current produces inductive heating on the screen causing the adjacent plastic surfaces to melt and flow into the mesh, creating a bond on the total surface area. Dave Brown, owner of Great Falls Canoe and Kayak Repair, Vienna, VA, uses a special repair technique based on operation of the Induction Toroid Welder to fix canoes. Whitewater canoeing poses the problem of frequent gashes that are difficult to repair. The main reason is that many canoes are made of plastics. The commercial Induction model is a self-contained, portable welding gun with a switch on the handle to regulate the temperature of the plastic melting screen. Welder has a broad range of applications in the automobile, appliance, aerospace and construction industries.

Lessons learned in the execution of advanced x-ray material discrimination (Conference Presentation)

NASA Astrophysics Data System (ADS)

Young, Sharene

2017-05-01

Advanced X-ray Material Discrimination (AXMD) or BAA 13-05 was a broad agency announcement which was initiated in order to develop solutions to the following problem. The emergence of improvised explosive threats and their use by terrorists has placed many challenges on the aviation security screening layers. EDS and AT X-ray equipment have been presented with considerable challenges in developing a broad detection capability for improvised explosive threats during security screening of checked bags and carry-on items. Technologies are needed that increase the measurement or mathematical discrimination between improvised explosive threats and stream-of-commerce clutter in checked baggage and carry-on items. Conventional EDS utilizes two basic discriminating signatures: effective atomic number and density of screened objects. R and D is needed to identify additional discriminating signatures between improvised explosive threats and stream-of commerce clutter to improve detection capability with reduced false alarm rates. DHS S and T EXD along with stakeholders at the TSA, TSL, and the UK Home Office have been successful in funding efforts to address and potentially provide operational solutions which can be deployed as part of the Next Generation of X-ray Technologies.

DOE Office of Scientific and Technical Information (OSTI.GOV)

E.N. Stepanov; I.I. Mel'nikov; V.P. Gridasov

In active production at OAO Magnitogorskii Metallurgicheskii Kombinat (MMK), samples of melt materials were taken during shutdown and during planned repairs at furnaces 1 and 8. In particular, coke was taken from the tuyere zone at different distances from the tuyere tip. The mass of the point samples was 2-15 kg, depending on the sampling zone. The material extracted from each zone underwent magnetic separation and screening by size class. The resulting coke sample was averaged out and divided into parts: one for determining the granulometric composition and mechanical strength; and the other for technical analysis and determination of themore » physicochemical properties of the coke.« less

Computer-aided screening system for cervical precancerous cells based on field emission scanning electron microscopy and energy dispersive x-ray images and spectra

NASA Astrophysics Data System (ADS)

Jusman, Yessi; Ng, Siew-Cheok; Hasikin, Khairunnisa; Kurnia, Rahmadi; Osman, Noor Azuan Bin Abu; Teoh, Kean Hooi

2016-10-01

The capability of field emission scanning electron microscopy and energy dispersive x-ray spectroscopy (FE-SEM/EDX) to scan material structures at the microlevel and characterize the material with its elemental properties has inspired this research, which has developed an FE-SEM/EDX-based cervical cancer screening system. The developed computer-aided screening system consisted of two parts, which were the automatic features of extraction and classification. For the automatic features extraction algorithm, the image and spectra of cervical cells features extraction algorithm for extracting the discriminant features of FE-SEM/EDX data was introduced. The system automatically extracted two types of features based on FE-SEM/EDX images and FE-SEM/EDX spectra. Textural features were extracted from the FE-SEM/EDX image using a gray level co-occurrence matrix technique, while the FE-SEM/EDX spectra features were calculated based on peak heights and corrected area under the peaks using an algorithm. A discriminant analysis technique was employed to predict the cervical precancerous stage into three classes: normal, low-grade intraepithelial squamous lesion (LSIL), and high-grade intraepithelial squamous lesion (HSIL). The capability of the developed screening system was tested using 700 FE-SEM/EDX spectra (300 normal, 200 LSIL, and 200 HSIL cases). The accuracy, sensitivity, and specificity performances were 98.2%, 99.0%, and 98.0%, respectively.

Biomolecular Recognition of Semiconductors and Magnetic Materials to Assemble Nanoparticle Heterostructures

DTIC Science & Technology

2002-01-01

shown that engineered viruses can recognize specific semiconductor surfaces through the selection by combinatorial phage display method. These specific... phage display libraries. The screening method selected for binding affinity of a population of random peptides displayed as part of the pIII minor coat...shorter spacing than expected distance ( M13 phage length: 880 nm) corresponds to the length scale imposed by the phage which formed the tilted

Empirical simulations of materials

NASA Astrophysics Data System (ADS)

Jogireddy, Vasantha

2011-12-01

Molecular dynamics is a specialized discipline of molecular modelling and computer techniques. In this work, first we presented simulation results from a study carried out on silicon nanowires. In the second part of the work, we presented an electrostatic screened coulomb potential developed for studying metal alloys and metal oxides. In particular, we have studied aluminum-copper alloys, aluminum oxides and copper oxides. Parameter optimization for the potential is done using multiobjective optimization algorithms.

The ADDITION-Cambridge trial protocol: a cluster -- randomised controlled trial of screening for type 2 diabetes and intensive treatment for screen-detected patients.

PubMed

Echouffo-Tcheugui, Justin B; Simmons, Rebecca K; Williams, Kate M; Barling, Roslyn S; Prevost, A Toby; Kinmonth, Ann Louise; Wareham, Nicholas J; Griffin, Simon J

2009-05-12

The increasing prevalence of type 2 diabetes poses a major public health challenge. Population-based screening and early treatment for type 2 diabetes could reduce this growing burden. However, the benefits of such a strategy remain uncertain. The ADDITION-Cambridge study aims to evaluate the effectiveness and cost-effectiveness of (i) a stepwise screening strategy for type 2 diabetes; and (ii) intensive multifactorial treatment for people with screen-detected diabetes in primary care. 63 practices in the East Anglia region participated. Three undertook the pilot study, 33 were allocated to three groups: no screening (control), screening followed by intensive treatment (IT) and screening plus routine care (RC) in an unbalanced (1:3:3) randomisation. The remaining 27 practices were randomly allocated to IT and RC. A risk score incorporating routine practice data was used to identify people aged 40-69 years at high-risk of undiagnosed diabetes. In the screening practices, high-risk individuals were invited to take part in a stepwise screening programme. In the IT group, diabetes treatment is optimised through guidelines, target-led multifactorial treatment, audit, feedback, and academic detailing for practice teams, alongside provision of educational materials for newly diagnosed participants. Primary endpoints are modelled cardiovascular risk at one year, and cardiovascular mortality and morbidity at five years after diagnosis of diabetes. Secondary endpoints include all-cause mortality, development of renal and visual impairment, peripheral neuropathy, health service costs, self-reported quality of life, functional status and health utility. Impact of the screening programme at the population level is also assessed through measures of mortality, cardiovascular morbidity, health status and health service use among high-risk individuals. ADDITION-Cambridge is conducted in a defined high-risk group accessible through primary care. It addresses the feasibility of population-based screening for diabetes, as well as the benefits and costs of screening and intensive multifactorial treatment early in the disease trajectory. The intensive treatment algorithm is based on evidence from studies including individuals with clinically diagnosed diabetes and the education materials are informed by psychological theory. ADDITION-Cambridge will provide timely evidence concerning the benefits of early intensive treatment and will inform policy decisions concerning screening for type 2 diabetes. Current Controlled trials ISRCTN86769081.

The ADDITION-Cambridge trial protocol: a cluster – randomised controlled trial of screening for type 2 diabetes and intensive treatment for screen-detected patients

PubMed Central

Echouffo-Tcheugui, Justin B; Simmons, Rebecca K; Williams, Kate M; Barling, Roslyn S; Prevost, A Toby; Kinmonth, Ann Louise; Wareham, Nicholas J; Griffin, Simon J

2009-01-01

Background The increasing prevalence of type 2 diabetes poses a major public health challenge. Population-based screening and early treatment for type 2 diabetes could reduce this growing burden. However, the benefits of such a strategy remain uncertain. Methods and design The ADDITION-Cambridge study aims to evaluate the effectiveness and cost-effectiveness of (i) a stepwise screening strategy for type 2 diabetes; and (ii) intensive multifactorial treatment for people with screen-detected diabetes in primary care. 63 practices in the East Anglia region participated. Three undertook the pilot study, 33 were allocated to three groups: no screening (control), screening followed by intensive treatment (IT) and screening plus routine care (RC) in an unbalanced (1:3:3) randomisation. The remaining 27 practices were randomly allocated to IT and RC. A risk score incorporating routine practice data was used to identify people aged 40–69 years at high-risk of undiagnosed diabetes. In the screening practices, high-risk individuals were invited to take part in a stepwise screening programme. In the IT group, diabetes treatment is optimised through guidelines, target-led multifactorial treatment, audit, feedback, and academic detailing for practice teams, alongside provision of educational materials for newly diagnosed participants. Primary endpoints are modelled cardiovascular risk at one year, and cardiovascular mortality and morbidity at five years after diagnosis of diabetes. Secondary endpoints include all-cause mortality, development of renal and visual impairment, peripheral neuropathy, health service costs, self-reported quality of life, functional status and health utility. Impact of the screening programme at the population level is also assessed through measures of mortality, cardiovascular morbidity, health status and health service use among high-risk individuals. Discussion ADDITION-Cambridge is conducted in a defined high-risk group accessible through primary care. It addresses the feasibility of population-based screening for diabetes, as well as the benefits and costs of screening and intensive multifactorial treatment early in the disease trajectory. The intensive treatment algorithm is based on evidence from studies including individuals with clinically diagnosed diabetes and the education materials are informed by psychological theory. ADDITION-Cambridge will provide timely evidence concerning the benefits of early intensive treatment and will inform policy decisions concerning screening for type 2 diabetes. Trial registration Current Controlled trials ISRCTN86769081 PMID:19435491

Readability, suitability, and health content assessment of web-based patient education materials on colorectal cancer screening.

PubMed

Tian, Chenlu; Champlin, Sara; Mackert, Michael; Lazard, Allison; Agrawal, Deepak

2014-08-01

Colorectal cancer (CRC) screening rates in the Unites States are still below target level. Web-based patient education materials are used by patients and providers to provide supplemental information on CRC screening. Low literacy levels and patient perceptions are significant barriers to screening. There are little data on the quality of these online materials from a health literacy standpoint or whether they address patients' perceptions. To evaluate the readability, suitability, and health content of web-based patient education materials on colon cancer screening. Descriptive study. Web-based patient materials. Twelve reputable and popular online patient education materials were evaluated. Readability was measured by using the Flesch-Kincaid Reading Grade Level, and suitability was determined by the Suitability Assessment of Materials, a scale that considers characteristics such as content, graphics, layout/typography, and learning stimulation. Health content was evaluated within the framework of the Health Belief Model, a behavioral model that relates patients' perceptions of susceptibility to disease, severity, and benefits and barriers to their medical decisions. Each material was scored independently by 3 reviewers. Flesch-Kincaid Reading Grade Level score, Suitability Assessment of Materials score, health content score. Readability for 10 of 12 materials surpassed the maximum recommended sixth-grade reading level. Five were 10th grade level and above. Only 1 of 12 materials received a superior suitability score; 3 materials received inadequate scores. Health content analysis revealed that only 50% of the resources discussed CRC risk in the general population and <25% specifically addressed patients at high risk, such as African Americans, smokers, patients with diabetes, and obese patients. For perceived barriers to screening, only 8.3% of resources discussed embarrassment, 25% discussed pain with colonoscopy, 25% addressed cost of colonoscopy, and none specifically mentioned the need to get colonoscopy when no symptoms are present. No material discussed the social benefits of screening. Descriptive design. Most online patient education materials for CRC screening are written beyond the recommended sixth-grade reading level, with suboptimal suitability. Health content is lacking in addressing key perceived risks, barriers, and benefits to CRC screening. Developing more appropriate and targeted patient education resources on CRC may improve patient understanding and promote screening. Copyright © 2014 American Society for Gastrointestinal Endoscopy. Published by Mosby, Inc. All rights reserved.

Low-cost carbon thick-film strain sensors for implantable applications

NASA Astrophysics Data System (ADS)

Gutierrez, Christian A.; Meng, Ellis

2010-09-01

The suitability of low-cost carbon thick-film strain sensors embedded within a biomedical grade silicone rubber (Silastic® MDX4-4210) for implantable applications is investigated. These sensors address the need for robust cost-effective implantable strain sensing technology for the closed loop operation of function-restoring neural prosthetic systems. Design, fabrication and characterization of the sensors are discussed in the context of the application to strain/fullness measurements of the urinary bladder as part of the neuroprosthetic treatment of lower urinary tract dysfunction. The fabrication process, utilizing off-the-shelf screen-printing materials, is convenient and cost effective while achieving resolutions down to 75 µm. This method can also be extended to produce multilayer embedded devices by superposition of different screen-printable materials. Uniaxial loading performance, temperature dependence and long-term soak testing are used to validate suitability for implantation while proof-of-concept operation (up to 40% strain) is demonstrated on a bench-top latex balloon bladder model.

Effectiveness of common fish screen materials for protecting lamprey ammocoetes—Influence of sweeping velocities and decreasing flows

USGS Publications Warehouse

Mesa, Matthew G.; Liedtke, Theresa L.; Weiland, Lisa K.; Christiansen, Helena E.

2017-12-14

In previous tests of the effectiveness of four common fish screen materials for excluding lamprey ammocoetes, we determined that woven wire (WW) allowed substantially more entrainment than perforated plate (PP), profile bar (PB), or Intralox (IL) material. These tests were simplistic because they used small vertically-oriented screens positioned perpendicular to the flow without a bypass or a sweeping velocity (SV). In the subsequent test discussed in this report, we exposed ammocoetes to much larger (2.5-m-wide) screen panels with flows up to 10 ft3 /s, a SV component, and a simulated bypass channel. The addition of a SV modestly improved protection of lamprey ammocoetes for all materials tested. A SV of 35 cm/s with an approach velocity (AV) of 12 cm/s, was able to provide protection for fish about 5–15 mm smaller than the protection provided by an AV of 12 cm/s without a SV component. The best-performing screen panels (PP, IL, and PB) provided nearly complete protection from entrainment for fish greater than 50-mm toal length, but the larger openings in the WW material only protected fish greater than 100-mm total length. Decreasing the AV and SV by 50 percent expanded the size range of protected lampreys by about 10–15 mm for those exposed to IL and WW screens, and it decreased the protective ability of PP screens by about 10 mm. Much of the improvement for IL and WW screens under the reduced flow conditions resulted from an increase in the number of lampreys swimming away from the screen. Fish of all sizes became impinged (that is, stuck on the screen surface for more than 1 s) on the screens, with the rate of impingement highest on PP (39– 72 percent) and lowest on WW (7–22 percent). Although impingements were common, injuries were rare, and 24-h post-test survival was greater than 99 percent. Our results refined the level of protection provided by these screen materials when both an AV and SV are present and confirmed our earlier recommendation that WW screens be replaced with more effective materials. Future work should focus on determining the risks associated with other screen types (for example, rotary drum screens, horizontal flat plate screens) and exploring the effectiveness of higher SV:AV ratios, because it may help expand the range of sizes protected by the best performing materials.

A feasible thermal-cycle screening system for cryogenic semiconductor components

NASA Astrophysics Data System (ADS)

Wu, Ligang; Liu, Dafu; Huang, Yimin; Zhu, Sangen; Gong, Haimei

2005-01-01

For the limit of its lifetime, the Stirling cooler is operated on the intermittent mode in satellite in some cases. Thus such cryogenic semiconductor components as HgCdTe mid or long wavelength infrared (IR) detectors are subjected to thousands of repeated thermal cycles from below -173°C to room temperature. Therefore, a series of experiments focused on quality, performance and reliability are essential in order to satisfy the reasonable requirements. Accordingly, a feasible thermal cycle screening system is put forward. And a vast experimental data show that thermal cycle tests play the most effective role in the environment stress screen (ESS). In this paper, we introduce the system to help to study the main failure mechanisms and improve the performance of the semiconductor components. Such main failure mechanisms as solder-ball invalidation encountered commonly in the detector modules, which is due to the large thermal expansion coefficient mismatch among different materials. The thermal cycle system is based on the principle of heat exchange. We expect HgCdTe IR detectors be cooled to lower than -173°C and heated to room temperature in a few minutes. Above all, we simulate the heating and cooling system through finite element method (FEM). As a result, the computations reveal that the IR detectors can be heated and cooled at a higher rate than expected. A consequent design of the entire system is founded on the simulation. At last, we adjust the mechanical structure of heat exchange system to the adaptive state to accomplish the ESS. The thermal cycle screening system includes an autocontrol part and a test part. The autocontrol part is adopted to realize the heat exchange between IR detectors and the environment, and the test one to inspect the temperature and electrical parameters of these detectors. And at least four IR detector samples can be screened at one time.

Patient Beliefs About Colon Cancer Screening.

PubMed

Ely, John W; Levy, Barcey T; Daly, Jeanette; Xu, Yinghui

2016-03-01

Only about half of eligible individuals undergo colon cancer screening. We have limited knowledge about the patient beliefs that adversely affect screening decisions and about which beliefs might be amenable to change through education. As part of a clinical trial, 641 rural Iowans, aged 52 to 79 years, reported their beliefs about colon cancer screening in response to a mailed questionnaire. Consenting subjects were randomized into four groups, which were distinguished by four levels of increasingly intensive efforts to promote screening. Two of the groups received mailed educational materials and completed a follow-up questionnaire, which allowed us to determine whether their beliefs about screening changed following the education. We also completed a factor analysis to identify underlying (latent) factors that might explain the responses to 33 questions about readiness, attitudes, and perceived barriers related to colon cancer screening. The strongest predictors of a patient's stated readiness to be screened were a physician's recommendation to be screened (1 point difference on 10-point Likert scale, 95 % confidence interval [CI], 0.5 to 1.6 point difference), a family history of colon cancer (0.85-point Likert scale difference, 95 % CI, 0.1 to 1.6), and a belief that health-care decisions should be mostly left to physicians rather than patients (Spearman correlation coefficient 0.21, P < .001). Of the 33 questionnaire items about screening beliefs, 11 (33 %) changed favorably following the educational intervention. In the factor analysis, the 33 items were reduced to 8 underlying factors, such as being too busy to undergo screening and worries about screening procedures. We found a limited number of underlying factors that may help explain patient resistance to colon cancer screening.

Trends in Participation Rates for the National Cancer Screening Program in Korea, 2002-2012

PubMed Central

Suh, Mina; Song, Seolhee; Cho, Ha Na; Park, Boyoung; Jun, Jae Kwan; Choi, Eunji; Kim, Yeol; Choi, Kui Son

2017-01-01

Purpose The National Cancer Screening Program (NCSP) in Korea supports cancer screening for stomach, liver, colorectal, breast, and cervical cancer. This study was conducted to assess trends in participation rates among Korean men and women invited to undergo screening via the NCSP as part of an effort to guide future implementation of the program in Korea. Materials and Methods Data from the NCSP for 2002 to 2012 were used to calculate annual participation rates with 95% confidence intervals (CI) by sex, insurance status, and age group for stomach, liver, colorectal, breast, and cervical cancer screening. Results In 2012, participation rates for stomach, liver, colorectal, breast, and cervical cancer screening were 47.3%, 25.0%, 39.5%, 51.9%, and 40.9%, respectively. The participation rates increased annually by 4.3% (95% CI, 4.0 to 4.6) for stomach cancer, 3.3% (95% CI, 2.5 to 4.1) for liver cancer, 4.1% (95% CI, 3.2 to 5.0) for colorectal cancer, 4.6% (95% CI, 4.1 to 5.0) for breast cancer, and 0.9% (95% CI, –0.7 to 2.5) for cervical cancer from 2002 to 2012. Conclusion Participant rates for the NCSP for the five above-mentioned cancers increased annually from 2002 to 2012. PMID:27857022

Molecular screening for hemotropic mycoplasmas in captive Barbary sheep (Ammotragus lervia) in southern Brazil

PubMed Central

Santos, Leonilda C.; Vidotto, Odilon; Morikawa, Vivien M.; Santos, Nelson J. R.; Vieira, Thállitha S. W. J.; Barros Filho, Ivan R.; Vieira, Rafael F. C.; Biondo, Alexander W.

2017-01-01

Aim: This study is part of an active surveillance program for monitoring animal health status in endangered species, and was conducted to screen captive Barbary sheep (Ammotragus lervia) for hemoplasma infection. Materials and Methods: A total of 12 blood samples were collected, DNA extracted and further tested by a pan-hemoplasma polymerase chain reaction protocol. Results: Animals were clinically healthy and not infested by ectoparasites. Although housekeeping gene DNA was successfully amplified, all the Barbary sheep samples tested negative for Mycoplasma sp. Conclusion: Notwithstanding the negative results, molecular pathogen surveys on Barbary sheep and other exotic wild mammals may provide insights regarding infection of endangered species caused by captivity stress in association with exposure to new pathogens worldwide. PMID:28919684

Probing of Metabolites in Finely Powdered Plant Material by Direct Laser Desorption Ionization Mass Spectrometry

NASA Astrophysics Data System (ADS)

Musharraf, Syed Ghulam; Ali, Arslan; Choudhary, M. Iqbal; Atta-ur-Rahman

2014-04-01

Natural products continue to serve as an important source of novel drugs since the beginning of human history. High-throughput techniques, such as MALDI-MS, can be techniques of choice for the rapid screening of natural products in plant materials. We present here a fast and reproducible matrix-free approach for the direct detection of UV active metabolites in plant materials without any prior sample preparation. The plant material is mechanically ground to a fine powder and then sieved through different mesh sizes. The collected plant material is dispersed using 1 μL solvent on a target plate is directly exposed to Nd:YAG 335 nm laser. The strategy was optimized for the analysis of plant metabolites after study of the different factors affecting the reproducibility and effectiveness of the analysis, including particle sizes effects, types of solvents used to disperse the sample, and the part of the plant analyzed. Moreover, several plant species, known for different classes of metabolites, were screened to establish the generality of the approach. The developed approach was validated by the characterization of withaferin A and nicotine in the leaves of Withania somnifera and Nicotiana tabacum, respectively, through comparison of its MS/MS data with the standard compound. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) techniques were used for the tissue imaging purposes. This approach can be used to directly probe small molecules in plant materials as well as in herbal and pharmaceutical formulations for fingerprinting development.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ghag, Chamkaur

Low background rare event searches in underground laboratories seeking observation of direct dark matter interactions or neutrino-less double beta decay have the potential to profoundly advance our understanding of the physical universe. Successful results from these experiments depend critically on construction from extremely radiologically clean materials and accurate knowledge of subsequent low levels of expected background. The experiments must conduct comprehensive screening campaigns to reduce radioactivity from detector components, and these measurements also inform detailed characterisation and quantification of background sources and their impact, necessary to assign statistical significance to any potential discovery. To provide requisite sensitivity for material screeningmore » and characterisation in the UK to support our rare event search activities, we have re-developed our infrastructure to add ultra-low background capability across a range of complementary techniques that collectively allow complete radioactivity measurements. Ultra-low background HPGe and BEGe detectors have been installed at the Boulby Underground Laboratory, itself undergoing substantial facility re-furbishment, to provide high sensitivity gamma spectroscopy in particular for measuring the uranium and thorium decay series products. Dedicated low-activity mass spectrometry instrumentation has been developed at UCL for part per trillion level contaminant identification to complement underground screening with direct U and Th measurements, and meet throughput demands. Finally, radon emanation screening at UCL measures radon background inaccessible to gamma or mass spectrometry techniques. With this new capability the UK is delivering half of the radioactivity screening for the LZ dark matter search experiment.« less

Health surveillance under adverse ergonomics conditions--validity of a screening method adapted for the occupational health service.

PubMed

Jonker, Dirk; Gustafsson, Ewa; Rolander, Bo; Arvidsson, Inger; Nordander, Catarina

2015-01-01

A new health surveillance protocol for work-related upper-extremity musculoskeletal disorders has been validated by comparing the results with a reference protocol. The studied protocol, Health Surveillance in Adverse Ergonomics Conditions (HECO), is a new version of the reference protocol modified for application in the Occupational Health Service (OHS). The HECO protocol contains both a screening part and a diagnosing part. Sixty-three employees were examined. The screening in HECO did not miss any diagnosis found when using the reference protocol, but in comparison to the reference protocol considerable time savings could be achieved. Fair to good agreement between the protocols was obtained for one or more diagnoses in neck/shoulders (86%, k = 0.62) and elbow/hands (84%, k = 0.49). Therefore, the results obtained using the HECO protocol can be compared with a reference material collected with the reference protocol, and thus provide information of the magnitude of disorders in an examined work group. Practitioner Summary: The HECO protocol is a relatively simple physical examination protocol for identification of musculoskeletal disorders in the neck and upper extremities. The protocol is a reliable and cost-effective tool for the OHS to use for occupational health surveillance in order to detect workplaces at high risk for developing musculoskeletal disorders.

Interventions to Improve Sexually Transmitted Disease Screening in Clinic-Based Settings.

PubMed

Taylor, Melanie M; Frasure-Williams, Jessica; Burnett, Phyllis; Park, Ina U

2016-02-01

The asymptomatic nature and suboptimal screening rates of sexually transmitted diseases (STD) call for implementation of successful interventions to improve screening in community-based clinic settings with attention to cost and resources. We used MEDLINE to systematically review comparative analyses of interventions to improve STD (chlamydia, gonorrhea, or syphilis) screening or rescreening in clinic-based settings that were published between January 2000 and January 2014. Absolute differences in the percent of the target population screened between comparison groups or relative percent increase in the number of tests or patients tested were used to score the interventions as highly effective (>20% increase) or moderately effective (5%-19% increase) in improving screening. Published cost of the interventions was described where available and, when not available, was estimated. Of the 4566 citations reviewed, 38 articles describing 42 interventions met the inclusion criteria. Of the 42 interventions, 16 (38.1%) were categorized as highly effective and 14 (33.3%) as moderately effective. Effective low-cost interventions (<$1000) included the strategic placement of specimen collection materials or automatic collection of STD specimens as part of a routine visit (7 highly effective and 1 moderately effective) and the use of electronic health records (EHRs; 3 highly effective and 4 moderately effective). Patient reminders for screening or rescreening (via text, telephone, and postcards) were highly effective (3) or moderately effective (2) and low or moderate cost (<$1001-10,000). Interventions with dedicated clinic staff to improve STD screening were highly effective (2) or moderately effective in improving STD screening (1) but high-cost ($10,001-$100,000). Successful interventions include changing clinic flow to routinely collect specimens for testing, using EHR screening reminders, and reminding patients to get screened or rescreened. These strategies can be tailored to different clinic settings to improve screening at a low cost.

Accessibility of standardized information of a national colorectal cancer screening program for low health literate screening invitees: A mixed method study.

PubMed

Fransen, Mirjam P; Dekker, Evelien; Timmermans, Daniëlle R M; Uiters, Ellen; Essink-Bot, Marie-Louise

2017-02-01

To explore the accessibility of standardized printed information materials of the national Dutch colorectal cancer screening program among low health literate screening invitees and to assess the effect of the information on their knowledge about colorectal cancer and the screening program. Linguistic tools were used to analyze the text and design characteristics. The accessibility, comprehensibility and relevance of the information materials were explored in interviews and in observations (n=25). The effect of the information on knowledge was assessed in an online survey (n=127). The materials employed a simple text and design. However, respondents expressed problems with the amount of information, and the difference between screening and diagnostic follow-up. Knowledge significantly increased in 10 out of 16 items after reading the information but remained low for colorectal cancer risk, sensitivity of testing, and the voluntariness of colorectal cancer screening. Despite intelligible linguistic and design characteristics, screening invitees with low health literacy had problems in accessing, comprehending and applying standard information materials on colorectal cancer screening, and lacked essential knowledge for informed decision-making about participation. To enable equal access to informed decision-making, information strategies need to be adjusted to the skills of low health literate screening invitees. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Screening of pollution control and clean-up materials for river chemical spills using the multiple case-based reasoning method with a difference-driven revision strategy.

PubMed

Liu, Rentao; Jiang, Jiping; Guo, Liang; Shi, Bin; Liu, Jie; Du, Zhaolin; Wang, Peng

2016-06-01

In-depth filtering of emergency disposal technology (EDT) and materials has been required in the process of environmental pollution emergency disposal. However, an urgent problem that must be solved is how to quickly and accurately select the most appropriate materials for treating a pollution event from the existing spill control and clean-up materials (SCCM). To meet this need, the following objectives were addressed in this study. First, the material base and a case base for environment pollution emergency disposal were established to build a foundation and provide material for SCCM screening. Second, the multiple case-based reasoning model method with a difference-driven revision strategy (DDRS-MCBR) was applied to improve the original dual case-based reasoning model method system, and screening and decision-making was performed for SCCM using this model. Third, an actual environmental pollution accident from 2012 was used as a case study to verify the material base, case base, and screening model. The results demonstrated that the DDRS-MCBR method was fast, efficient, and practical. The DDRS-MCBR method changes the passive situation in which the choice of SCCM screening depends only on the subjective experience of the decision maker and offers a new approach to screening SCCM.

Feasibility of integrating mental health and noncommunicable disease risk factor screening in periodical medical examination of employees in industries: An exploratory initiative

PubMed Central

Sukumar, Gautham Melur; Kupatira, Kowshik; Gururaj, G.

2015-01-01

Background: Noncommunicable disease (NCDs), psychological, substance use disorders, and stress-related issues have been less understood in Indian industrial settings. Systems for screening and early identification of the above have not been integrated in workplaces, nor there is a strong regulatory backing for the same. Aim: To explore the feasibility of integrating mental health and select NCD risk factor screening with the periodical medical examination of employees. To identify proportion of employees with select NCD risk factors and symptoms suggestive of mental health problems. Settings and Design: Around 10% of employees from a leading motor industry in Bangalore, (706) participated in this cross-sectional voluntary screening program. Materials and Methods: This screening was conducted as a part of their annual medical examination. A mixed method of self-report and interview administered technique was adopted for the same. Statistical Analysis: Descriptive statistical methods (proportions, median, mean, and standard deviation (SD)) and Chi-square test of significance. Results and Conclusions: Screening revealed the following; tobacco use (18%), alcohol use (57%), perceived work stress (10%), and obesity (3%). Nearly 23% screened positive for psychological distress. Time consumed for this assessment was 1–5 min. Initial attempts point out that it is feasible to integrate screening for mental health, substance use, and NCD risk factors in periodic medical examination using a combination of self-report and interview-administered method, though further detailed assessments for confirmation is necessary. PMID:26023267

Applications of high throughput (combinatorial) methodologies to electronic, magnetic, optical, and energy-related materials

NASA Astrophysics Data System (ADS)

Green, Martin L.; Takeuchi, Ichiro; Hattrick-Simpers, Jason R.

2013-06-01

High throughput (combinatorial) materials science methodology is a relatively new research paradigm that offers the promise of rapid and efficient materials screening, optimization, and discovery. The paradigm started in the pharmaceutical industry but was rapidly adopted to accelerate materials research in a wide variety of areas. High throughput experiments are characterized by synthesis of a "library" sample that contains the materials variation of interest (typically composition), and rapid and localized measurement schemes that result in massive data sets. Because the data are collected at the same time on the same "library" sample, they can be highly uniform with respect to fixed processing parameters. This article critically reviews the literature pertaining to applications of combinatorial materials science for electronic, magnetic, optical, and energy-related materials. It is expected that high throughput methodologies will facilitate commercialization of novel materials for these critically important applications. Despite the overwhelming evidence presented in this paper that high throughput studies can effectively inform commercial practice, in our perception, it remains an underutilized research and development tool. Part of this perception may be due to the inaccessibility of proprietary industrial research and development practices, but clearly the initial cost and availability of high throughput laboratory equipment plays a role. Combinatorial materials science has traditionally been focused on materials discovery, screening, and optimization to combat the extremely high cost and long development times for new materials and their introduction into commerce. Going forward, combinatorial materials science will also be driven by other needs such as materials substitution and experimental verification of materials properties predicted by modeling and simulation, which have recently received much attention with the advent of the Materials Genome Initiative. Thus, the challenge for combinatorial methodology will be the effective coupling of synthesis, characterization and theory, and the ability to rapidly manage large amounts of data in a variety of formats.

Chemical compatibility screening results of plastic packaging to mixed waste simulants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nigrey, P.J.; Dickens, T.G.

1995-12-01

We have developed a chemical compatibility program for evaluating transportation packaging components for transporting mixed waste forms. We have performed the first phase of this experimental program to determine the effects of simulant mixed wastes on packaging materials. This effort involved the screening of 10 plastic materials in four liquid mixed waste simulants. The testing protocol involved exposing the respective materials to {approximately}3 kGy of gamma radiation followed by 14 day exposures to the waste simulants of 60 C. The seal materials or rubbers were tested using VTR (vapor transport rate) measurements while the liner materials were tested using specificmore » gravity as a metric. For these tests, a screening criteria of {approximately}1 g/m{sup 2}/hr for VTR and a specific gravity change of 10% was used. It was concluded that while all seal materials passed exposure to the aqueous simulant mixed waste, EPDM and SBR had the lowest VTRs. In the chlorinated hydrocarbon simulant mixed waste, only VITON passed the screening tests. In both the simulant scintillation fluid mixed waste and the ketone mixture simulant mixed waste, none of the seal materials met the screening criteria. It is anticipated that those materials with the lowest VTRs will be evaluated in the comprehensive phase of the program. For specific gravity testing of liner materials the data showed that while all materials with the exception of polypropylene passed the screening criteria, Kel-F, HDPE, and XLPE were found to offer the greatest resistance to the combination of radiation and chemicals.« less

Composite scintillator screen

DOEpatents

Zeman, Herbert D.

1994-01-01

A scintillator screen for an X-ray system includes a substrate of low-Z material and bodies of a high-Z material embedded within the substrate. By preselecting the size of the bodies embedded within the substrate, the spacial separation of the bodies and the thickness of the screen, the sensitivity of the screen to X-rays within a predetermined energy range can be predicted.

40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 28 2013-07-01 2013-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride Terrain...

40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 27 2014-07-01 2014-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride Terrain...

40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 27 2011-07-01 2011-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride Terrain...

40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride Terrain...

40 CFR Appendix III to Part 266 - Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 28 2012-07-01 2012-07-01 false Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride III Appendix III to Part 266 Protection of Environment... to Part 266—Tier II Emission Rate Screening Limits for Free Chlorine and Hydrogen Chloride Terrain...

A testing program to evaluate the effects of simulant mixed wastes on plastic transportation packaging components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nigrey, P.J.; Dickens, T.G.; Dickman, P.T.

1997-08-01

Based on regulatory requirements for Type A and B radioactive material packaging, a Testing Program was developed to evaluate the effects of mixed wastes on plastic materials which could be used as liners and seals in transportation containers. The plastics evaluated in this program were butadiene-acrylonitrile copolymer (Nitrile rubber), cross-linked polyethylene, epichlorohydrin, ethylene-propylene rubber (EPDM), fluorocarbons, high-density polyethylene (HDPE), butyl rubber, polypropylene, polytetrafluoroethylene, and styrene-butadiene rubber (SBR). These plastics were first screened in four simulant mixed wastes. The liner materials were screened using specific gravity measurements and seal materials by vapor transport rate (VTR) measurements. For the screening of linermore » materials, Kel-F, HDPE, and XLPE were found to offer the greatest resistance to the combination of radiation and chemicals. The tests also indicated that while all seal materials passed exposure to the aqueous simulant mixed waste, EPDM and SBR had the lowest VTRs. In the chlorinated hydrocarbon simulant mixed waste, only Viton passed the screening tests. In both the simulant scintillation fluid mixed waste and the ketone mixture waste, none of the seal materials met the screening criteria. Those materials which passed the screening tests were subjected to further comprehensive testing in each of the simulant wastes. The materials were exposed to four different radiation doses followed by exposure to a simulant mixed waste at three temperatures and four different exposure times (7, 14, 28, 180 days). Materials were tested by measuring specific gravity, dimensional, hardness, stress cracking, VTR, compression set, and tensile properties. The second phase of this Testing Program involving the comprehensive testing of plastic liner has been completed and for seal materials is currently in progress.« less

Development of Standard Reference Materials to support assessment of iodine status for nutritional and public health purposes.

PubMed

Long, Stephen E; Catron, Brittany L; Boggs, Ashley Sp; Tai, Susan Sc; Wise, Stephen A

2016-09-01

The use of urinary iodine as an indicator of iodine status relies in part on the accuracy of the analytical measurement of iodine in urine. Likewise, the use of dietary iodine intake as an indicator of iodine status relies in part on the accuracy of the analytical measurement of iodine in dietary sources, including foods and dietary supplements. Similarly, the use of specific serum biomarkers of thyroid function to screen for both iodine deficiency and iodine excess relies in part on the accuracy of the analytical measurement of those biomarkers. The National Institute of Standards and Technology has been working with the NIH Office of Dietary Supplements for several years to develop higher-order reference measurement procedures and Standard Reference Materials to support the validation of new routine analytical methods for iodine in foods and dietary supplements, for urinary iodine, and for several serum biomarkers of thyroid function including thyroid-stimulating hormone, thyroglobulin, total and free thyroxine, and total and free triiodothyronine. These materials and methods have the potential to improve the assessment of iodine status and thyroid function in observational studies and clinical trials, thereby promoting public health efforts related to iodine nutrition. © 2016 American Society for Nutrition.

Applying Fused Silica and Other Transparent Window Materials in Aerospace Applications

NASA Technical Reports Server (NTRS)

Salem, Jon

2017-01-01

A variety of transparent ceramics, such as AlONs and spinels, that were developed for military applications hold promise as spacecraft windows. Window materials in spacecraft such as the Space Shuttle must meet many requirements such as maintaining cabin pressure, sustaining thermal shock, and tolerating damage from hyper-velocity impact while providing superior optical characteristics. The workhorse transparent material for space missions from Apollo to the International Space Station has been fused silica due in part to its low density, low coefficient of expansion and optical quality. Despite its successful use, fused silica exhibits lower fracture toughness and impact resistance as compared to newer materials. Can these newer transparent ceramics lighten spacecraft window systems and might they be useful for applications such as phone screens? This presentation will compare recent optical ceramics to fused silica and demonstrate how weight can be saved.

[Comparative evaluation of information products regarding cancer screening of German-speaking cancer organizations].

PubMed

Hofmann, Julia; Kien, Christina; Gartlehner, Gerald

2015-01-01

Evidence-based information materials about the pros and cons of cancer screening are important sources for men and women to decide for or against cancer screening. The aim of this paper was to compare recommendations from different cancer institutions in German-speaking countries (Austria, Germany, and Switzerland) regarding screening for breast, cervix, colon, and prostate cancer and to assess the quality and development process of patient information materials. Relevant information material was identified through web searches and personal contact with cancer institutions. To achieve our objective, we employed a qualitative approach. The quality of 22 patient information materials was analysed based on established guidance by Bunge et al. In addition, we conducted guided interviews about the process of developing information materials with decision-makers of cancer institutes. Overall, major discrepancies in cancer screening recommendations exist among the Austrian, German, and Swiss cancer institutes. Process evaluation revealed that crucial steps of quality assurance, such as assembling a multi-disciplinary panel, assessing conflicts of interest, or transparency regarding funding sources, have frequently not been undertaken. All information materials had substantial quality deficits in multiple areas. Three out of four institutes issued information materials that met fewer than half of the quality criteria. Most patient information materials of cancer institutes in German-speaking countries are fraught with substantial deficits and do not provide an objective source for patients to be able to make an informed decision for or against cancer screening. Copyright © 2015. Published by Elsevier GmbH.

Formulation and evaluation of floating tablet of H2-receptor antagonist.

PubMed

Kesarla, Rajesh S; Vora, Pratik Ashwinbhai; Sridhar, B K; Patel, Gunvant; Omri, Abdelwahab

2015-01-01

Conventional sustained dosage form of ranitidine hydrochloride (HCl) does not prevent frequent administration due to its degradation in colonic media and limited absorption in the upper part of GIT. Ranitidine HCl floating tablet was formulated with sublimation method to overcome the stated problem. Compatibility study for screening potential excipients was carried out using Fourier transform infrared spectroscopy (FT-IR) and differential scanning chromatography (DSC). Selected excipients were further evaluated for optimizing the formulation. Preliminary screening of binder, polymer and sublimating material was based on hardness and drug release, drug release with release kinetics and floating lag time with total floatation time, respectively. Selected excipients were subjected to 3(2) factorial design with polymer and sublimating material as independent factors. Matrix tablets were obtained by using 16/32" flat-faced beveled edges punches followed by sublimation. FT-IR and DSC indicated no significant incompatibility with selected excipients. Klucel-LF, POLYOX WSR N 60 K and l-menthol were selected as binder, polymer and sublimating material, respectively, for factorial design batches after preliminary screening. From the factorial design batches, optimum concentration to release the drug within 12 h was found to be 420 mg of POLYOX and 40 mg of l-menthol. Stability studies indicated the formulation as stable. Ranitidine HCl matrix floating tablets were formulated to release 90% of drug in stomach within 12 h. Hence, release of the drug could be sustained within narrow absorption site. Moreover, the dosage form was found to be floating within a fraction of second independent of the pH of media ensuring a robust formulation.

Variable Shadow Screens for Imaging Optical Devices

NASA Technical Reports Server (NTRS)

Lu, Ed; Chretien, Jean L.

2004-01-01

Variable shadow screens have been proposed for reducing the apparent brightnesses of very bright light sources relative to other sources within the fields of view of diverse imaging optical devices, including video and film cameras and optical devices for imaging directly into the human eye. In other words, variable shadow screens would increase the effective dynamic ranges of such devices. Traditionally, imaging sensors are protected against excessive brightness by use of dark filters and/or reduction of iris diameters. These traditional means do not increase dynamic range; they reduce the ability to view or image dimmer features of an image because they reduce the brightness of all parts of an image by the same factor. On the other hand, a variable shadow screen would darken only the excessively bright parts of an image. For example, dim objects in a field of view that included the setting Sun or bright headlights could be seen more readily in a picture taken through a variable shadow screen than in a picture of the same scene taken through a dark filter or a narrowed iris. The figure depicts one of many potential variations of the basic concept of the variable shadow screen. The shadow screen would be a normally transparent liquid-crystal matrix placed in front of a focal-plane array of photodetectors in a charge-coupled-device video camera. The shadow screen would be placed far enough from the focal plane so as not to disrupt the focal-plane image to an unacceptable degree, yet close enough so that the out-of-focus shadows cast by the screen would still be effective in darkening the brightest parts of the image. The image detected by the photodetector array itself would be used as feedback to drive the variable shadow screen: The video output of the camera would be processed by suitable analog and/or digital electronic circuitry to generate a negative partial version of the image to be impressed on the shadow screen. The parts of the shadow screen in front of those parts of the image with brightness below a specified threshold would be left transparent; the parts of the shadow screen in front of those parts of the image where the brightness exceeded the threshold would be darkened by an amount that would increase with the excess above the threshold.

Risk of Breast Cancer in Women with False-Positive Results according to Mammographic Features.

PubMed

Castells, Xavier; Torá-Rocamora, Isabel; Posso, Margarita; Román, Marta; Vernet-Tomas, Maria; Rodríguez-Arana, Ana; Domingo, Laia; Vidal, Carmen; Baré, Marisa; Ferrer, Joana; Quintana, María Jesús; Sánchez, Mar; Natal, Carmen; Espinàs, Josep A; Saladié, Francina; Sala, María

2016-08-01

Purpose To assess the risk of breast cancer in women with false-positive screening results according to radiologic classification of mammographic features. Materials and Methods Review board approval was obtained, with waiver of informed consent. This retrospective cohort study included 521 200 women aged 50-69 years who underwent screening as part of the Spanish Breast Cancer Screening Program between 1994 and 2010 and who were observed until December 2012. Cox proportional hazards regression analysis was used to estimate the age-adjusted hazard ratio (HR) of breast cancer and the 95% confidence interval (CI) in women with false-positive mammograms as compared with women with negative mammograms. Separate models were adjusted for screen-detected and interval cancers and for screen-film and digital mammography. Time without a breast cancer diagnosis was plotted by using Kaplan-Meier curves. Results When compared with women with negative mammograms, the age-adjusted HR of cancer in women with false-positive results was 1.84 (95% CI: 1.73, 1.95; P < .001). The risk was higher in women who had calcifications, whether they were (HR, 2.73; 95% CI: 2.28, 3.28; P < .001) or were not (HR, 2.24; 95% CI: 2.02, 2.48; P < .001) associated with masses. Women in whom mammographic features showed changes in subsequent false-positive results were those who had the highest risk (HR, 9.13; 95% CI: 8.28, 10.07; P < .001). Conclusion Women with false-positive results had an increased risk of breast cancer, particularly women who had calcifications at mammography. Women who had more than one examination with false-positive findings and in whom the mammographic features changed over time had a highly increased risk of breast cancer. Previous mammographic features might yield useful information for further risk-prediction models and personalized follow-up screening protocols. (©) RSNA, 2016 Online supplemental material is available for this article.

Low-background Gamma Spectroscopy at Sanford Underground Laboratory

NASA Astrophysics Data System (ADS)

Chiller, Christopher; Alanson, Angela; Mei, Dongming

2014-03-01

Rare-event physics experiments require the use of material with unprecedented radio-purity. Low background counting assay capabilities and detectors are critical for determining the sensitivity of the planned ultra-low background experiments. A low-background counting, LBC, facility has been built at the 4850-Level Davis Campus of the Sanford Underground Research Facility to perform screening of material and detector parts. Like many rare event physics experiments, our LBC uses lead shielding to mitigate background radiation. Corrosion of lead brick shielding in subterranean installations creates radon plate-out potential as well as human risks of ingestible or respirable lead compounds. Our LBC facilities employ an exposed lead shield requiring clean smooth surfaces. A cleaning process of low-activity silica sand blasting and borated paraffin hot coating preservation was employed to guard against corrosion due to chemical and biological exposures. The resulting lead shield maintains low background contribution integrity while fully encapsulating the lead surface. We report the performance of the current LBC and a plan to develop a large germanium well detector for PMT screening. Support provided by Sd governors research center-CUBED, NSF PHY-0758120 and Sanford Lab.

Selection Metric for Photovoltaic Materials Screening Based on Detailed-Balance Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blank, Beatrix; Kirchartz, Thomas; Lany, Stephan

The success of recently discovered absorber materials for photovoltaic applications has been generating increasing interest in systematic materials screening over the last years. However, the key for a successful materials screening is a suitable selection metric that goes beyond the Shockley-Queisser theory that determines the thermodynamic efficiency limit of an absorber material solely by its band-gap energy. Here, we develop a selection metric to quantify the potential photovoltaic efficiency of a material. Our approach is compatible with detailed balance and applicable in computational and experimental materials screening. We use the complex refractive index to calculate radiative and nonradiative efficiency limitsmore » and the respective optimal thickness in the high mobility limit. We also compare our model to the widely applied selection metric by Yu and Zunger [Phys. Rev. Lett. 108, 068701 (2012)] with respect to their dependence on thickness, internal luminescence quantum efficiency, and refractive index. Finally, the model is applied to complex refractive indices calculated via electronic structure theory.« less

Selection Metric for Photovoltaic Materials Screening Based on Detailed-Balance Analysis

DOE PAGES

Blank, Beatrix; Kirchartz, Thomas; Lany, Stephan; ...

2017-08-31

The success of recently discovered absorber materials for photovoltaic applications has been generating increasing interest in systematic materials screening over the last years. However, the key for a successful materials screening is a suitable selection metric that goes beyond the Shockley-Queisser theory that determines the thermodynamic efficiency limit of an absorber material solely by its band-gap energy. Here, we develop a selection metric to quantify the potential photovoltaic efficiency of a material. Our approach is compatible with detailed balance and applicable in computational and experimental materials screening. We use the complex refractive index to calculate radiative and nonradiative efficiency limitsmore » and the respective optimal thickness in the high mobility limit. We also compare our model to the widely applied selection metric by Yu and Zunger [Phys. Rev. Lett. 108, 068701 (2012)] with respect to their dependence on thickness, internal luminescence quantum efficiency, and refractive index. Finally, the model is applied to complex refractive indices calculated via electronic structure theory.« less

Consequences of screening in lung cancer: development and dimensionality of a questionnaire.

PubMed

Brodersen, John; Thorsen, Hanne; Kreiner, Svend

2010-08-01

The objective of this study was to extend the Consequences of Screening (COS) Questionnaire for use in a lung cancer screening by testing for comprehension, content coverage, dimensionality, and reliability. In interviews, the suitability, content coverage, and relevance of the COS were tested on participants in a lung cancer screening program. The results were thematically analyzed to identify the key consequences of abnormal and false-positive screening results. Item Response Theory and Classical Test Theory were used to analyze data. Dimensionality, objectivity, and reliability were established by item analysis, examining the fit between item responses and Rasch models. Eight themes specifically relevant for participants in lung cancer screening results were identified: "self-blame,"focus on symptoms,"stigmatization,"introvert,"harm of smoking,"impulsivity,"empathy," and "regretful of still smoking." Altogether, 26 new items for part I and 16 new items for part II were generated. These themes were confirmed to fit a partial-credit Rasch model measuring different constructs including several of the new items. In conclusion, the reliability and the dimensionality of a condition-specific measure with high content validity for persons having abnormal or false-positive lung cancer screening results have been demonstrated. This new questionnaire called Consequences of Screening in Lung Cancer (COS-LC) covers in two parts the psychosocial experience in lung cancer screening. Part I: "anxiety,"behavior,"dejection,"sleep,"self-blame,"focus on airway symptoms,"stigmatization,"introvert," and "harm of smoking." Part II: "calm/relax,"social network,"existential values,"impulsivity,"empathy," and "regretful of still smoking."

Combinatorial Methodology for Screening Selectivity in Polymeric Pervaporation Membranes.

PubMed

Godbole, Rutvik V; Ma, Lan; Doerfert, Michael D; Williams, Porsche; Hedden, Ronald C

2015-11-09

Combinatorial methodology is described for rapid screening of selectivity in polymeric pervaporation membrane materials for alcohol-water separations. The screening technique is demonstrated for ethanol-water separation using a model polyacrylate system. The materials studied are cross-linked random copolymers of a hydrophobic comonomer (n-butyl acrylate, B) and a hydrophilic comonomer (2-hydroxyethyl acrylate, H). A matrix of materials is prepared that has orthogonal variations in two key variables, H:B ratio and cross-linker concentration. For mixtures of ethanol and water, equilibrium selectivities and distribution coefficients are obtained by combining swelling measurements with high-throughput HPLC analysis. Based on the screening results, two copolymers are selected for further study as pervaporation membranes to quantify permeability selectivity and the flux of ethanol. The screening methodology described has good potential to accelerate the search for new membrane materials, as it is adaptable to a broad range of polymer chemistries.

Screening for substance misuse in the dental care setting: findings from a nationally representative survey of dentists

PubMed Central

Parish, Carrigan L.; Pereyra, Margaret R.; Pollack, Harold A.; Cardenas, Gabriel; Castellon, Pedro C.; Abel, Stephen N.; Singer, Richard; Metsch, Lisa R.

2015-01-01

Aims The dental setting is a potentially valuable venue for screening for substance misuse. Therefore, we assessed dentists’ inquiry of substance misuse through their patient medical history forms and their agreement with the compatibility of screening as part of the dentists’ professional role. Design A nationally representative survey of general dentists using a sampling frame obtained from the American Dental Association Survey Center (November 2010 – November 2011). Setting United States of America Participants 1,802 general dentists Measurements A 38 item survey instrument assessing the relationship between dentists’ practice, knowledge, behaviors, and attitudes with their query about substance misuse and their belief that such screening is part of their professional role. Findings Dentists who accepted substance misuse screening as part of their professional role were more likely to query about misuse with their patients (85.8%) compared with those who did not accept such screening as part of their role (68.2%) (p<0.001). Prior experience and knowledge about substance misuse were the strongest predictors of dentists’ inquiry about patient substance use/misuse and acceptance of screening as part of their role in their clinical practice (p<0.05). Conclusion While more than three quarters of U.S. dentists-report that they ask their patients about substance misuse, two-thirds do not agree that such screening is compatible with their professional role. PMID:26032243

Oak Ridge Health Studies Phase 1 report, Volume 2, Part B, Dose Reconstruction Feasibility Study. Tasks 3 and 4, Identification of important environmental pathways for materials released from the Oak Ridge Reservation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brorby, G.P.; Bruce, G.M.; Widner, T.E.

1993-09-01

While each of the three different screening comparisons made in this report (i.e., within-medium evaluation, between-media evaluation and relative importance grouping) individually provides information potentially of value in focusing future studies, each one is subject to a variety of limitations, the most important being associated with the absence or variable quality of environmental data for a number of the contaminants and media. These screening exercises are intended to provide an initial framework for approaching the study of an extremely complex site. Other approaches could very well yield somewhat different priorities, and the identification or reinterpretation of data in subsequent detailedmore » studies are likely to invalidate some of the results of these screening exercises. However, these evaluations provide a logical approach to defining initial off- site health impact study priorities for the ORR. Therefore, while care must be taken in attempting to make any broad generalizations or greatly simplifying assumptions with regard to the potential health hazards posed by the complex releases from the Reservation, Table 6-1 represents an attempt to summarize a set of recommendations that are derived from the screening exercises presented in this report. Table 6-1 identifies the facilities, processes and contaminants believed to have the highest potential for resulting in off-site health impacts. Table 6-2 identifies contaminants for which no ranking could be performed as part of this feasibility study, because of the absence of any appropriate data for any environmental medium.« less

[Are German information materials on colorectal cancer screening understandable or do they fail? Rating of health information by users with different educational backgrounds].

PubMed

Seidel, G; Münch, I; Dreier, M; Borutta, B; Walter, U; Dierks, M-L

2014-03-01

Evidence-based patient information is an essential part of decision making in health issues. A qualitative study was conducted to examine whether consumers consider the health information on colorectal cancer screening in Germany helpful in supporting their decision making. In this study, eight texts from different German authors about colorectal cancer screening were evaluated with a criteria-based selection. The texts were tested for understandability, structure, design, and effect on readers. Thirteen semi-structured focus groups were formed including 59 higher-educated and 15 lower-educated testers, 46 % of them being male with a mean age of 62.9 years. The transcripts were analyzed by content-analytic assessment. The testers provided detailed comments on the content and design of the texts. They revealed inaccuracies and suggested improvements of the texts. The testers differed from each other in terms of the intensity of their participation in the discussions and comprehension of the material. The reception of the flyers and brochures varied according to the educational level of the testers. Lower-educated testers often skipped passages of texts about risks as well as passages containing numbers and graphics. The texts had different effects on the testers, regardless of the level of education. If adverse effects were presented, some testers became scared while others were reassured because they felt informed. Most of the testers appreciated a call for participation as a central message of the text. Sometimes, if there was no clear appeal to attend the screening, the testers even asked for it. The recently introduced political strategy of promoting an informed choice is applied to an unprepared population who was used to getting a clear yes-or-no recommendation. Thus, at first, the population has to learn how to make an informed choice. This topic must be addressed and taken into account in the process of developing health information. Since this is not always the case, we conclude that current materials are limited in their contribution toward the decision of attending CRC screening.

Knowledge, Attitude, and Experience of Cervical Cancer and Screening among Sub-saharan African Female Students in a UK University

PubMed Central

Ogbonna, Faith Sopuruchukwu

2017-01-01

Background: Cervical cancer is one of the major diseases that affect women of child bearing age. Its main cause is the human papilloma virus; although, other associated factors have been evidenced to increase its risk. Pap-smear screening and vaccination which has been shown to be successful in reducing the incidence and prevalence of the disease in developed countries, has been neglected in developing countries due to lack of knowledge, misconceptions, and cultural beliefs. Materials and Methods: A cross-sectional study involving only female Sub-Saharan Africa (SSA) students in a UK university setting. Results: One hundred and eighty-six (42%) African female students were recruited from the 442 SSA students attending one of the major Universities in the UK. Seventy-one (38.2%) of the students were aware of cervical screening, but only 20 (10.8%) reported having knowledge of cervical cancer. A small percentage of about 26.9% (50 Students) were already part of this screening program; although, 81 (43.5%) showed willingness to participate in future screening programs. More so, it was evident that student's perception was dependent on their experience of the disease (P = 000) just as their participation in screening program was dependent on their awareness level (P ≤ 0.01). Conclusion: Female African students from the SSA region have poor knowledge of the disease which influenced their attitude toward screening. More needs to be carried out to increase awareness and uptake of screening within the school environment as university setting provides a viable platform to promote healthy behavior. PMID:28300047

Deciding on PSA-screening - Quality of current consumer information on the Internet.

PubMed

Korfage, Ida J; van den Bergh, Roderick C N; Essink-Bot, Marie-Louise

2010-11-01

Given that screening for prostate cancer has the potential to reduce prostate cancer mortality at the expense of considerable overdiagnosis and overtreatment, the availability of core consumer information - correct, balanced and supportive of autonomous decision-making - is a must. We assessed the quality of consumer information available through the Internet per November 2009 and its possible contribution to informed decision-making by potential screenees. Consumer information on PSA-screening was sought through the Internet in November 2009. Materials had to be targeted at potential consumers, offered by not-for-profit organisations, released in 2005 or after, in English or Dutch. Per material 2 of the authors assessed independently from each other whether standardised pre-defined topics were addressed, whether the content was correct and which approach was taken towards the decision-making process about uptake. Twenty-three materials were included, of which 11 were released (shortly) after the results of 2 large randomized-controlled trials (RCTs) that evaluated the effectiveness of screening for prostate cancer had been published in March 2009. That a PSA-test result can be abnormal because of non-cancerous conditions (false positive) and that it may miss prostate cancer (false negative) was not addressed in 2/23 and 8/23 materials, respectively. The risk of overdiagnosis and overtreatment was not mentioned in 6 out of 23. PSA-screening was presented as a usual thing to do in some materials, whereas other materials emphasised the voluntary nature of PSA-screening ('it is your decision'). The content of 19/23 materials was considered sufficiently informative according to the pre-defined criteria, 12/23 materials were considered supportive of informed decision-making by men. Most materials of not-for-profit organizations supplied adequate information about PSA-screening, whilst the degree of persuasion towards uptake reflected variations in opinions on men's autonomy regarding their own health. Copyright © 2010 Elsevier Ltd. All rights reserved.

Health surveillance under adverse ergonomics conditions – validity of a screening method adapted for the occupational health service

PubMed Central

Jonker, Dirk; Gustafsson, Ewa; Rolander, Bo; Arvidsson, Inger; Nordander, Catarina

2015-01-01

A new health surveillance protocol for work-related upper-extremity musculoskeletal disorders has been validated by comparing the results with a reference protocol. The studied protocol, Health Surveillance in Adverse Ergonomics Conditions (HECO), is a new version of the reference protocol modified for application in the Occupational Health Service (OHS). The HECO protocol contains both a screening part and a diagnosing part. Sixty-three employees were examined. The screening in HECO did not miss any diagnosis found when using the reference protocol, but in comparison to the reference protocol considerable time savings could be achieved. Fair to good agreement between the protocols was obtained for one or more diagnoses in neck/shoulders (86%, k = 0.62) and elbow/hands (84%, k = 0.49). Therefore, the results obtained using the HECO protocol can be compared with a reference material collected with the reference protocol, and thus provide information of the magnitude of disorders in an examined work group. Practitioner Summary: The HECO protocol is a relatively simple physical examination protocol for identification of musculoskeletal disorders in the neck and upper extremities. The protocol is a reliable and cost-effective tool for the OHS to use for occupational health surveillance in order to detect workplaces at high risk for developing musculoskeletal disorders. PMID:25761380

Learning Effectiveness and Cognitive Loads in Instructional Materials of Programming Language on Single and Dual Screens

ERIC Educational Resources Information Center

Hsu, Jenq-Muh; Chang, Ting-Wen; Yu, Pao-Ta

2012-01-01

The teaching and learning environment in a traditional classroom typically includes a projection screen, a projector, and a computer within a digital interactive table. Instructors may apply multimedia learning materials using various information communication technologies to increase interaction effects. However, a single screen only displays a…

Student and community outcomes in service-learning: part 2--community outcomes.

PubMed

Reising, Deanna L; Allen, Patricia N; Hall, Susan G

2006-12-01

This article is the second of a two-part series reporting outcomes from a service-learning program implemented in a bachelor of science in nursing program. Part 1 (on pages 512-515) described students' perceptions of outcomes realized from the program, and Part 2 describes the community outcomes. The purposes of the program were to provide students with history-taking, blood pressure, and heart rate assessment skills, and beginning counseling skills, as well as to provide the university community with blood pressure screening and counseling in a convenient and accessible location. Data on community outcomes were collected on a continual basis during the hypertension screening and counseling program implementation. Clients were anonymously surveyed on health behavior actions taken after their screening and on the screening process. More than 700 client screenings were performed over 2 years, with positive health behavior changes being reported by clients.

Testing of Candidate Rigid Heatshield Materials at LHMEL for the Entry, Descent, and Landing Technology Development Project

NASA Technical Reports Server (NTRS)

Sepka, Steven; Gasch, Matthew; Beck, Robin A.; White, Susan

2012-01-01

The material testing results described in this paper were part of a material development program of vendor-supplied, proposed heat shield materials. The goal of this program was to develop low density, rigid material systems with an appreciable weight savings over phenolic-impregnated carbon ablator (PICA) while improving material response performance. New technologies, such as PICA-like materials in honeycomb or materials with variable density through-the-thickness were tested. The material testing took place at the Wright-Patterson Air Force Base Laser Hardened Materials Laboratory (LHMEL) using a 10.6 micron CO2 laser operating with the test articles immersed in a nitrogen-gas environment at 1 atmosphere pressure. Test measurements included thermocouple readings of in-depth temperatures, pyrometer readings of surface temperatures, weight scale readings of mass loss, and sectioned-sample readings of char depth. Two laser exposures were applied. The first exposure was at an irradiance of 450 W/cm2 for 50 or 60 seconds to simulate an aerocapture maneuver. The second laser exposure was at an irradiance of 115 W/cm2 for 100 seconds to simulate a planetary entry. Results from Rounds 1 and 2 of these screening tests are summarized.

Characterization of PCBs from computers and mobile phones, and the proposal of newly developed materials for substitution of gold, lead and arsenic.

PubMed

Dervišević, Irma; Minić, Duško; Kamberović, Željko; Ćosović, Vladan; Ristić, Mirjana

2013-06-01

In this paper, we have analyzed parts of printed circuit board (PCB) and liquid crystal display (LCD) screens of mobile phones and computers, quantitative and qualitative chemical compositions of individual components, and complete PCBs were determined. Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) methods were used to determine the temperatures of phase transformations, whereas qualitative and quantitative compositions of the samples were determined by X-ray fluorescence spectrometry (XRF), inductively coupled plasma optical emission spectrometry (ICP-OES), and scanning electron microscopy (SEM)-energy dispersive X-ray spectrometry (EDS) analyses. The microstructure of samples was studied by optical microscopy. Based on results of the analysis, a procedure for recycling PCBs is proposed. The emphasis was on the effects that can be achieved in the recycling process by extraction of some parts before the melting process. In addition, newly developed materials can be an adequate substitute for some of the dangerous and harmful materials, such as lead and arsenic are proposed, which is in accordance with the European Union (EU) Restriction of the use of certain hazardous substances (RoHS) directive as well as some alternative materials for use in the electronics industry instead of gold and gold alloys.

Newborn screening education on the internet: a content analysis of North American newborn screening program websites.

PubMed

Araia, Makda H; Potter, Beth K

2011-09-01

The Internet is a potentially important medium for communication about public health programs including newborn screening. This study explores whether the information available on official newborn screening program websites is consistent with existing guidelines regarding educational content for parents. We conducted a systematic search of the public websites of newborn screening programs in the US and Canada, identifying web pages and downloadable brochures that contained educational information. Two researchers independently reviewed all documents to determine the extent to which they included 14 key recommended educational messages. We identified 85 documents containing educational information on 46 US and 6 Canadian newborn screening program websites. The documents contained from 1 to 14 of the recommended messages. The majority of identified materials emphasized the importance and benefits of screening. The differences between US and Canadian materials were related to the importance of parental involvement in follow-up and issues of consent and storage of blood spots. Our findings are consistent with studies of non-web-based newborn screening education materials. The results emphasize the need for further evaluation of newborn screening education, including internet-based resources, particularly in terms of the impact of particular messages on parental attitudes and behaviors.

Promoting chlamydia screening with posters and leaflets in general practice--a qualitative study.

PubMed

Freeman, Elaine; Howell-Jones, Rebecca; Oliver, Isabel; Randall, Sarah; Ford-Young, William; Beckwith, Philippa; McNulty, Cliodna

2009-10-12

General practice staff are reluctant to discuss sexual health opportunistically in all consultations. Health promotion materials may help alleviate this barrier. Chlamydia screening promotion posters and leaflets, produced by the English National Chlamydia Screening Programme (NCSP), have been available to general practices, through local chlamydia screening offices, since its launch. In this study we explored the attitudes of general practice staff to these screening promotional materials, how they used them, and explored other promotional strategies to encourage chlamydia screening. Twenty-five general practices with a range of screening rates, were purposively selected from six NCSP areas in England. In focus groups doctors, nurses, administrative staff and receptionists were encouraged to discuss candidly their experiences about their use and opinions of posters, leaflets and advertising to promote chlamydia screening. Researchers observed whether posters and leaflets were on display in reception and/or waiting areas. Data were collected and analysed concurrently using a stepwise framework analytical approach. Although two-thirds of screening practices reported that they displayed posters and leaflets, they were not prominently displayed in most practices. Only a minority of practices reported actively using screening promotional materials on an ongoing basis. Most staff in all practices were not following up the advertising in posters and leaflets by routinely offering opportunistic screening to their target population. Some staff in many practices thought posters and leaflets would cause offence or embarrassment to their patients. Distribution of chlamydia leaflets by receptionists was thought to be inappropriate by some practices, as they thought patients would be offended when being offered a leaflet in a public area. Practice staff suggested the development of pocket-sized leaflets. The NCSP should consider developing a range of more discrete but eye catching posters and small leaflets specifically to promote chlamydia screening in different scenarios within general practice; coordinators should audit their use. Practice staff need to discuss, with their screening co-ordinator, how different practice staff can promote chlamydia screening most effectively using the NCSP promotional materials, and change them regularly so that they do not loose their impact. Education to change all practice staff's attitudes towards sexual health is needed to reduce their worries about displaying the chlamydia materials, and how they may follow up the advertising up with a verbal offer of screening opportunistically to 15-24 year olds whenever they visit the practice.

Promoting chlamydia screening with posters and leaflets in general practice - a qualitative study

PubMed Central

Freeman, Elaine; Howell-Jones, Rebecca; Oliver, Isabel; Randall, Sarah; Ford-Young, William; Beckwith, Philippa; McNulty, Cliodna

2009-01-01

Background General practice staff are reluctant to discuss sexual health opportunistically in all consultations. Health promotion materials may help alleviate this barrier. Chlamydia screening promotion posters and leaflets, produced by the English National Chlamydia Screening Programme (NCSP), have been available to general practices, through local chlamydia screening offices, since its launch. In this study we explored the attitudes of general practice staff to these screening promotional materials, how they used them, and explored other promotional strategies to encourage chlamydia screening. Methods Twenty-five general practices with a range of screening rates, were purposively selected from six NCSP areas in England. In focus groups doctors, nurses, administrative staff and receptionists were encouraged to discuss candidly their experiences about their use and opinions of posters, leaflets and advertising to promote chlamydia screening. Researchers observed whether posters and leaflets were on display in reception and/or waiting areas. Data were collected and analysed concurrently using a stepwise framework analytical approach. Results Although two-thirds of screening practices reported that they displayed posters and leaflets, they were not prominently displayed in most practices. Only a minority of practices reported actively using screening promotional materials on an ongoing basis. Most staff in all practices were not following up the advertising in posters and leaflets by routinely offering opportunistic screening to their target population. Some staff in many practices thought posters and leaflets would cause offence or embarrassment to their patients. Distribution of chlamydia leaflets by receptionists was thought to be inappropriate by some practices, as they thought patients would be offended when being offered a leaflet in a public area. Practice staff suggested the development of pocket-sized leaflets. Conclusion The NCSP should consider developing a range of more discrete but eye catching posters and small leaflets specifically to promote chlamydia screening in different scenarios within general practice; coordinators should audit their use. Practice staff need to discuss, with their screening co-ordinator, how different practice staff can promote chlamydia screening most effectively using the NCSP promotional materials, and change them regularly so that they do not loose their impact. Education to change all practice staff's attitudes towards sexual health is needed to reduce their worries about displaying the chlamydia materials, and how they may follow up the advertising up with a verbal offer of screening opportunistically to 15-24 year olds whenever they visit the practice. PMID:19821964

Geochemistry and microbiology of iron-related well-screen encrustation and aquifer biofouling in Suffolk County, Long Island, New York

USGS Publications Warehouse

Walter, D.A.

1997-01-01

Iron-related well-screen encrustation and aquifer biofouling has decreased the specific capacity of several production wells in Suffolk County, N.Y., and has forced the Suffolk County Water Authority to adopt a costly well-reconditioning and replacement program. The specific-capacity declines are the result of the precipitation of iron oxyhydroxides and the growth of iron bacteria on the well screens and in the pore spaces of the surrounding formation. Mineralogic and chemical analyses indicate that the inorganic part of the encrusting material consists primarily of amorphous ferric hydroxide (Fe(OH)3 ); minor components of the material include goethite (FeOOH), hematite (Fe2 O 3 ), and quartz (SiO 2 ). The weight percent of ferric hydroxide in the material ranged from 32.3 to 98.6 percent and averaged 64.3 percent. Equilibrium modeling indicated that during pumping the well waters were supersaturated with respect to goethite, hematite, magnetite, and quartz and were under-saturated with respect to ferric hydroxide. Theoretical Eh values computed for the ferrous/ferric-iron redox couple and the oxygen/water redox couple averaged 390 millivolts and 810 millivolts, respectively, indicating that the waters were in a state of redox disequilibrium. The disequilibrium condition arises from the mixing of ground water with a low dissolved-oxygen concentration with oxygenated ground water during operation of the well. The low pH of the ground water contributes to the disequilibrium condition by slowing the rate of iron oxidation after the introduction of oxygen. Chemical and mineralogical data indicate that most of the encrusting material in the wells was deposited while the wells were shut down, probably in response to the use of treated water of higher pH to keep pump turbines wet while the wells were not in operation; the increased pH of water in the static water column increases the rate of ferrous-iron oxidation and causes the well water to become increasingly saturated with respect to ferric hydroxide. The median half-time of oxidation in samples of untreated ground water (pH 4-5) was 4.19 days, whereas the average half-time of oxidation in treated water (pH 7-8) was 11.9 minutes Equilibrium modeling indicated that treated waters generally were supersaturated with respect to ferric hydroxide, whereas untreated well waters were not. Field and laboratory data indicate that iron bacteria play an important role in the encrustation and biofouling process in Suffolk County. Filamentous iron bacteria were common in the affected wells. The most common species was Gallionella ferruginea, an effective biofouling agent that prefers water with low, but detectable, dissolved-oxygen concentrations and high dissolved-iron concentrations; this species was more common in biofilm samples from the Magothy aquifer than in those from the upper glacial aquifer. Iron bacteria also were found in sediment cores from several locations in the aquifer and in drilling water. Lignite could act as a carbon source for heterotrophic iron bacteria, which could accelerate the formation of iron-bacteria biofilms in wells screened in some parts of the Magothy aquifer. Iron-bacteria biofilms alter the chemistry of well water by removing iron, manganese, and sulfate from solution and by increasing the pH. Sulfur-reducing bacteria and iron-sulfide mineral phases were observed in some samples of encrusting material, indicating that these bacteria could contribute to well-screen encrustation in some geochemical environments.

Smart material screening machines using smart materials and controls

NASA Astrophysics Data System (ADS)

Allaei, Daryoush; Corradi, Gary; Waigand, Al

2002-07-01

The objective of this product is to address the specific need for improvements in the efficiency and effectiveness in physical separation technologies in the screening areas. Currently, the mining industry uses approximately 33 billion kW-hr per year, costing 1.65 billion dollars at 0.05 cents per kW-hr, of electrical energy for physical separations. Even though screening and size separations are not the single most energy intensive process in the mining industry, they are often the major bottleneck in the whole process. Improvements to this area offer tremendous potential in both energy savings and production improvements. Additionally, the vibrating screens used in the mining processing plants are the most costly areas from maintenance and worker health and safety point of views. The goal of this product is to reduce energy use in the screening and total processing areas. This goal is accomplished by developing an innovative screening machine based on smart materials and smart actuators, namely smart screen that uses advanced sensory system to continuously monitor the screening process and make appropriate adjustments to improve production. The theory behind the development of Smart Screen technology is based on two key technologies, namely smart actuators and smart Energy Flow ControlT (EFCT) strategies, developed initially for military applications. Smart Screen technology controls the flow of vibration energy and confines it to the screen rather than shaking much of the mass that makes up the conventional vibratory screening machine. Consequently, Smart Screens eliminates and downsizes many of the structural components associated with conventional vibratory screening machines. As a result, the surface area of the screen increases for a given envelope. This increase in usable screening surface area extends the life of the screens, reduces required maintenance by reducing the frequency of screen change-outs and improves throughput or productivity.

[Leaflets and websites on colorectal cancer screening and their quality assessment from experts' views].

PubMed

Dreier, M; Borutta, B; Seidel, G; Münch, I; Töppich, J; Bitzer, E-M; Dierks, M-L; Walter, U

2014-03-01

In Germany, individuals who have statutory health insurance have free access to colorectal cancer (CRC) screening tests, and can choose between a fecal occult blood test and a screening colonoscopy. Evidence-based health information may support informed choices regarding whether or not to undergo CRC screening. The aim of this study was to assess whether the available German information materials on CRC screening meet evidence-based health information standards. A systematic search was made for print media and websites on CRC screening addressed to German people with average CRC risk (search period for print media August 2010, for websites January-March 2012). The identified information was assessed with a newly developed comprehensive list of criteria. In all, 41 print media, including 28 flyers and 13 brochures, and 36 websites were identified and assessed. These materials reported more often the benefits than the risks of CRC screening, and quantified presentations of benefits and risks were less frequently given. Most of the materials called for participation and did not indicate the option to decide whether or not to attend CRC screening. This bias in favor of screening was increased by fear-provoking or downplayed wording. Most materials included false and misleading information. The requirements for evidence-based patient information were currently not met by most of the leaflets and websites in Germany. Feedback was given to the producers of the leaflets including a discussion of the findings. The results may be used to revise existing leaflets or to develop new health information on CRC screening.

Evaluation of Promotional Materials To Promote Low-Dose Computed Tomography (LDCT) Screening to High-Risk Consumers and Health Care Providers.

PubMed

Hudson, Janella N; Quinn, Gwendolyn P; Wilson, Lauren E; Simmons, Vani N

2017-03-11

Low-dose computed tomography (LDCT) screening is a promising screening modality for increasing the detection rate of early stage lung cancers among high-risk individuals. Despite being recommended by the US Preventative Services Task Force, uptake of LDCT remains low. The objective of the current study was to gather feedback from high-risk consumers and health care providers on LDCT promotional materials. Focus group discussions were conducted with high-risk individuals (8 focus groups; N = 38) and primary care providers (9 focus groups; N = 23). Participants reviewed existing LDCT promotional materials to assess their perceptions of media materials created to publicize LDCT. Data were analyzed using the constant comparative method. Several key themes emerged from focus groups that can be used to inform development of future LDCT promotional materials. High-risk (HR) participants expressed greater receptivity for promotional materials that did not further stigmatize lung cancer and/or smoking and expressed preferences for materials that clearly outlined the risks/benefits of screening. Primary care providers (PCPs) offered suggestions to facilitate the referral process such as diagnostic codes and requested a design that clearly outlined eligibility criteria. A clear and thorough explanation of LDCT eligibility, cost, harms, and benefits was of chief importance for both PCP and HR audiences. Given that PCPs and HR audiences are not well informed on the specifics of LDCT screening eligibility and insurance coverage, creating provider and patient education opportunities will aid in shared decision-making opportunities. Promotional materials that meet the needs of the target audience are needed to facilitate discussions of risks/benefits of screening with HR individuals.

Chemical compatibility screening test results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nigrey, P.J.; Dickens, T.G.

1997-12-01

A program for evaluating packaging components that may be used in transporting mixed-waste forms has been developed and the first phase has been completed. This effort involved the screening of ten plastic materials in four simulant mixed-waste types. These plastics were butadiene-acrylonitrile copolymer rubber, cross-linked polyethylene (XLPE), epichlorohydrin rubber, ethylene-propylene rubber (EPDM), fluorocarbon (Viton or Kel-F), polytetrafluoroethylene, high-density polyethylene (HDPE), isobutylene-isoprene copolymer rubber (butyl), polypropylene, and styrene-butadiene rubber (SBR). The selected simulant mixed wastes were (1) an aqueous alkaline mixture of sodium nitrate and sodium nitrite; (2) a chlorinated hydrocarbon mixture; (3) a simulant liquid scintillation fluid; and (4) amore » mixture of ketones. The testing protocol involved exposing the respective materials to 286,000 rads of gamma radiation followed by 14-day exposures to the waste types at 60{degrees}C. The seal materials were tested using vapor transport rate (VTR) measurements while the liner materials were tested using specific gravity as a metric. For these tests, a screening criterion of 0.9 g/hr/m{sup 2} for VTR and a specific gravity change of 10% was used. Based on this work, it was concluded that while all seal materials passed exposure to the aqueous simulant mixed waste, EPDM and SBR had the lowest VTRs. In the chlorinated hydrocarbon simulant mixed waste, only Viton passed the screening tests. In both the simulant scintillation fluid mixed waste and the ketone mixture simulant mixed waste, none of the seal materials met the screening criteria. For specific gravity testing of liner materials, the data showed that while all materials with the exception of polypropylene passed the screening criteria, Kel-F, HDPE, and XLPE offered the greatest resistance to the combination of radiation and chemicals.« less

Road screening and distribution route multi-objective robust optimization for hazardous materials based on neural network and genetic algorithm.

PubMed

Ma, Changxi; Hao, Wei; Pan, Fuquan; Xiang, Wang

2018-01-01

Route optimization of hazardous materials transportation is one of the basic steps in ensuring the safety of hazardous materials transportation. The optimization scheme may be a security risk if road screening is not completed before the distribution route is optimized. For road screening issues of hazardous materials transportation, a road screening algorithm of hazardous materials transportation is built based on genetic algorithm and Levenberg-Marquardt neural network (GA-LM-NN) by analyzing 15 attributes data of each road network section. A multi-objective robust optimization model with adjustable robustness is constructed for the hazardous materials transportation problem of single distribution center to minimize transportation risk and time. A multi-objective genetic algorithm is designed to solve the problem according to the characteristics of the model. The algorithm uses an improved strategy to complete the selection operation, applies partial matching cross shift and single ortho swap methods to complete the crossover and mutation operation, and employs an exclusive method to construct Pareto optimal solutions. Studies show that the sets of hazardous materials transportation road can be found quickly through the proposed road screening algorithm based on GA-LM-NN, whereas the distribution route Pareto solutions with different levels of robustness can be found rapidly through the proposed multi-objective robust optimization model and algorithm.

Risks and reliability of manufacturing processes as related to composite materials for spacecraft structures

NASA Technical Reports Server (NTRS)

Bao, Han P.

1995-01-01

Fabricating primary aircraft and spacecraft structures using advanced composite materials entail both benefits and risks. The benefits come from much improved strength-to-weight ratios and stiffness-to-weight ratios, potential for less part count, ability to tailor properties, chemical and solvent resistance, and superior thermal properties. On the other hand, the risks involved include high material costs, lack of processing experience, expensive labor, poor reproducibility, high toxicity for some composites, and a variety of space induced risks. The purpose of this project is to generate a manufacturing database for a selected number of materials with potential for space applications, and to rely on this database to develop quantitative approaches to screen candidate materials and processes for space applications on the basis of their manufacturing risks including costs. So far, the following materials have been included in the database: epoxies, polycyanates, bismalemides, PMR-15, polyphenylene sulfides, polyetherimides, polyetheretherketone, and aluminum lithium. The first four materials are thermoset composites; the next three are thermoplastic composites, and the last one is is a metal. The emphasis of this database is on factors affecting manufacturing such as cost of raw material, handling aspects which include working life and shelf life of resins, process temperature, chemical/solvent resistance, moisture resistance, damage tolerance, toxicity, outgassing, thermal cycling, and void content, nature or type of process, associate tooling, and in-process quality assurance. Based on industry experience and published literature, a relative ranking was established for each of the factors affecting manufacturing as listed above. Potential applications of this database include the determination of a delta cost factor for specific structures with a given process plan and a general methodology to screen materials and processes for incorporation into the current conceptual design optimization of future spacecrafts as being coordinated by the Vehicle Analysis Branch where this research is being conducted.

An effective method to screen sodium-based layered materials for sodium ion batteries

NASA Astrophysics Data System (ADS)

Zhang, Xu; Zhang, Zihe; Yao, Sai; Chen, An; Zhao, Xudong; Zhou, Zhen

2018-03-01

Due to the high cost and insufficient resource of lithium, sodium-ion batteries are widely investigated for large-scale applications. Typically, insertion-type materials possess better cyclic stability than alloy-type and conversion-type ones. Therefore, in this work, we proposed a facile and effective method to screen sodium-based layered materials based on Materials Project database as potential candidate insertion-type materials for sodium ion batteries. The obtained Na-based layered materials contains 38 kinds of space group, which reveals that the credibility of our screening approach would not be affected by the space group. Then, some important indexes of the representative materials, including the average voltage, volume change and sodium ion mobility, were further studied by means of density functional theory computations. Some materials with extremely low volume changes and Na diffusion barriers are promising candidates for sodium ion batteries. We believe that our classification algorithm could also be used to search for other alkali and multivalent ion-based layered materials, to accelerate the development of battery materials.

Subscale solid motor nozzle tests, phase 4 and nozzle materials screening and thermal characterization, phase 5

NASA Technical Reports Server (NTRS)

Arnold, J.; Dodson, J.; Laub, B.

1979-01-01

Subscale solid motor nozzles containing a baseline material or low cost materials to be considered as potential replacements for the baseline material are designed and tested. Data are presented from tests of four identically designed 2.5 inch throat diameter nozzles and one 7 inch throat diameter nozzle. The screening of new candidate low cost materials, as well as their thermophysical and thermochemical characterization is also discussed.

Influence of clamping plate permeability and metal screen structures on three-dimensional magnetic field and eddy current loss in end region of a turbo-generator by numerical analysis

NASA Astrophysics Data System (ADS)

Likun, Wang; Weili, Li; Yi, Xue; Chunwei, Guan

2013-11-01

A significant problem of turbogenerators on complex end structures is overheating of local parts caused by end losses in the end region. Therefore, it is important to investigate the 3-D magnetic field and eddy current loss in the end. In end region of operating large turbogenerator at thermal power plants, magnetic leakage field distribution is complex. In this paper, a 3-D mathematical model used for the calculation of the electromagnetic field in the end region of large turbo-generators is given. The influence of spatial locations of end structures, the actual shape and material of end windings, clamping plate, and copper screen are considered. Adopting the time-step finite element (FE) method and taking the nonlinear characteristics of the core into consideration, a 3-D transient magnetic field is calculated. The objective of this paper is to investigate the influence of clamping plate permeability and metal screen structures on 3-D electromagnetic field distribution and eddy current loss in end region of a turbo-generator. To reduce the temperature of copper screen, a hollow metal screen is proposed. The eddy current loss, which is gained from the 3D transient magnetic field, is used as heat source for the thermal field of end region. The calculated temperatures are compared with test data.

Effects of Promotional Materials on Attitudes and Fear towards Colorectal Cancer Screening among Chinese Older Adults: An Experimental Study.

PubMed

Leung, Doris Y P; Chen, Joanne M T; Lou, Vivian W Q; Wong, Eliza M L; Chan, Aileen W K; So, Winnie K W; Chan, Carmen W H

2017-07-13

Colorectal cancer (CRC) screening is a cost-effective prevention and control strategy. However, the promotion of CRC screening for older adults may be difficult because reading CRC prevention information may evoke embarrassment, fear, and anxiety towards the screening procedure and cancer diagnosis. This study aims to (1) examine the effects of three promotional materials for CRC screening on the attitudes toward CRC screening tests (screening interest, screening effectiveness, and trust in the screening results) and cancer fear, and (2) to explore the interaction effect of cancer fear with screening effectiveness and trust in the screening results on screening interest of the three screening tests (fecal occult blood test (FOBT), flexible sigmoidoscopy, and colonoscopy) among Chinese older adults. A total of 114 community-dwelling older adults were asked to look at the corresponding promotional materials (pamphlet, cartoon, and video) of one of the three study groups. The pamphlet and video represent convention strategies and the cartoon represents an innovative strategy. No significant difference was observed in the screening interest and cancer fear across groups. FOBT was the most preferred screening modality. The video group has a large proportion agreed screening effectiveness of flexible sigmoidoscopy than pamphlet and cartoon groups and trusted in the screening results for FOBT and flexible sigmoidoscopy than the pamphlet group. Logistic regression results showed that the effect of trust in the screening results on screening interest for colonoscopy was greater among participants with higher cancer fear than those with lower cancer fear level. In conclusion, the three promotional groups had produced similar results in their attitudes toward CRC screening and cancer fear. The use of cartoons may be a comparable approach with conventional methods in the promotion of CRC screening. Additional components that can arouse fear and boost response efficacy simultaneously might also be useful for the effective promotion of colonoscopy among Chinese older adults.

Effects of Promotional Materials on Attitudes and Fear towards Colorectal Cancer Screening among Chinese Older Adults: An Experimental Study

PubMed Central

Leung, Doris Y. P.; Chen, Joanne M. T.; Lou, Vivian W. Q.; Wong, Eliza M. L.; So, Winnie K. W.; Chan, Carmen W. H.

2017-01-01

Colorectal cancer (CRC) screening is a cost-effective prevention and control strategy. However, the promotion of CRC screening for older adults may be difficult because reading CRC prevention information may evoke embarrassment, fear, and anxiety towards the screening procedure and cancer diagnosis. This study aims to (1) examine the effects of three promotional materials for CRC screening on the attitudes toward CRC screening tests (screening interest, screening effectiveness, and trust in the screening results) and cancer fear, and (2) to explore the interaction effect of cancer fear with screening effectiveness and trust in the screening results on screening interest of the three screening tests (fecal occult blood test (FOBT), flexible sigmoidoscopy, and colonoscopy) among Chinese older adults. A total of 114 community-dwelling older adults were asked to look at the corresponding promotional materials (pamphlet, cartoon, and video) of one of the three study groups. The pamphlet and video represent convention strategies and the cartoon represents an innovative strategy. No significant difference was observed in the screening interest and cancer fear across groups. FOBT was the most preferred screening modality. The video group has a large proportion agreed screening effectiveness of flexible sigmoidoscopy than pamphlet and cartoon groups and trusted in the screening results for FOBT and flexible sigmoidoscopy than the pamphlet group. Logistic regression results showed that the effect of trust in the screening results on screening interest for colonoscopy was greater among participants with higher cancer fear than those with lower cancer fear level. In conclusion, the three promotional groups had produced similar results in their attitudes toward CRC screening and cancer fear. The use of cartoons may be a comparable approach with conventional methods in the promotion of CRC screening. Additional components that can arouse fear and boost response efficacy simultaneously might also be useful for the effective promotion of colonoscopy among Chinese older adults. PMID:28703752

Is the use of 55" LCD 3D screen practicable in large seminar to lecture hall size audiences?

NASA Astrophysics Data System (ADS)

Ilgner, Justus; Sparrer, Ingo; Westhofen, Martin

2013-03-01

Introduction: The presentation of surgical contents to undergraduate medical students can be challenging, as the surgical approach is often different from the anatomist's perspective that is reproduced in textbooks. Although there are many options to record endoscopic, microscopic as well as "open" surgical procedures, presentation of contents still can be costly and entail a loss in picture quality including depth impression. Material and methods: We presented seven stereoscopic clips of 30 seconds to minute and 20 seconds each to 64 medical students (43 female / 21 male) as part of the "sensory organs" course module in 4th year; using one 55" LCD 3D screen with line-alternating, circular polarization. Students were asked for their subjective viewing impression and about their opinion on the usefulness of 3D presentations in medical lectures. Results: 63% of students returned their questionnaires completed. The main results (multiple answers allowed) were: 70% noted that 3D presentations made complex anatomy easier to comprehend from an unknown perspective, 48% would feel better motivated to learn surgical procedures, and 38% would generally prefer a 3D lecture to a 2D lecture, while 23% would not see any advantage of 3D presentations whatsoever. Conclusion: While the screen size compared to audience size was far from ideal, it gave medical students, who had not been exposed to surgical procedures in the operating theatre yet, an impression of general approach to microsurgery and how the choice of surgical approach in relation of vital structures can minimize trauma and unwanted effects to the patient. The availability of larger screens, however, may necessitate changes in production of 3D material from the microscope camera onward.

Evaluation of a standard test method for screening fuels in soils

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sorini, S.S.; Schabron, J.F.

1996-12-31

A new screening method for fuel contamination in soils was recently developed as American Society for Testing and Materials (ASTM) Method D-5831-95, Standard Test Method for Screening Fuels in Soils. This method uses low-toxicity chemicals and can be sued to screen organic- rich soils, as well as being fast, easy, and inexpensive to perform. Fuels containing aromatic compounds, such as diesel fuel and gasoline, as well as other aromatic-containing hydrocarbon materials, such as motor oil, crude oil, and cola oil, can be determined. The screening method for fuels in soils was evaluated by conducting a Collaborative study on the method.more » In the Collaborative study, a sand and an organic soil spiked with various concentrations of diesel fuel were tested. Data from the Collaborative study were used to determine the reproducibility (between participants) and repeatability (within participants) precision of the method for screening the test materials. The Collaborative study data also provide information on the performance of portable field equipment (patent pending) versus laboratory equipment for performing the screening method and a comparison of diesel concentration values determined using the screening method versus a laboratory method.« less

Influence of the Extractive Method on the Recovery of Phenolic Compounds in Different Parts of Hymenaea martiana Hayne

PubMed Central

Oliveira, Fernanda Granja da Silva; de Lima-Saraiva, Sarah Raquel Gomes; Oliveira, Ana Paula; Rabêlo, Suzana Vieira; Rolim, Larissa Araújo; Almeida, Jackson Roberto Guedes da Silva

2016-01-01

Background: Popularly known as “jatobá,” Hymenaea martiana Hayne is a medicinal plant widely used in the Brazilian Northeast for the treatment of various diseases. Objective: The aim of this study was to evaluate the influence of different extractive methods in the production of phenolic compounds from different parts of H. martiana. Materials and Methods: The leaves, bark, fruits, and seeds were dried, pulverized, and submitted to maceration, ultrasound, and percolation extractive methods, which were evaluated for yield, visual aspects, qualitative phytochemical screening, phenolic compound content, and total flavonoids. Results: The highest results of yield were obtained from the maceration of the leaves, which may be related to the contact time between the plant drug and solvent. The visual aspects of the extracts presented some differences between the extractive methods. The phytochemical screening showed consistent data with other studies of the genus. Both the vegetal part as the different extractive methods influenced significantly the levels of phenolic compounds, and the highest content was found in the maceration of the barks, even more than the content found previously. No differences between the levels of total flavonoids were significant. The highest concentration of total flavonoids was found in the ultrasound of the barks, followed by maceration on this drug. According to the results, the barks of H. martiana presented the highest total flavonoid contents. Conclusion: The results demonstrate that both the vegetable and the different extractive methods influenced significantly various parameters obtained in the various extracts, demonstrating the importance of systematic comparative studies for the development of pharmaceuticals and cosmetics. SUMMARY The phytochemical screening showed consistent data with other studies of the genus HymenaeaBoth the vegetable part and the different extractive methods influenced significantly various parameters obtained in the various extracts, including the levels of phenolic compoundsThe barks of H. martiana presented the highest total phenolic and flavonoid contents. PMID:27695267

Informing men about prostate cancer screening: a randomized controlled trial of patient education materials.

PubMed

Ilic, Dragan; Egberts, Kristine; McKenzie, Joanne E; Risbridger, Gail; Green, Sally

2008-04-01

Patient education materials can assist patient decision making on prostate cancer screening. To explore the effectiveness of presenting health information on prostate cancer screening using video, internet, and written interventions on patient decision making, attitudes, knowledge, and screening interest. Randomized controlled trial. A total of 161 men aged over 45, who had never been screened for prostate cancer, were randomized to receive information on prostate cancer screening. Participants were assessed at baseline and 1-week postintervention for decisional conflict, screening interest, knowledge, anxiety, and decision-making preference. A total of 156 men were followed-up at 1-week postintervention. There was no statistical, or clinical, difference in mean change in decisional conflict scores between the 3 intervention groups (video vs internet -0.06 [95% CI -0.24 to 0.12]; video vs pamphlet 0.04 [95%CI -0.15 to 0.22]; internet vs pamphlet 0.10 [95%CI -0.09 to 0.28]). There was also no statistically significant difference in mean knowledge, anxiety, decision-making preference, and screening interest between the 3 intervention groups. Results from this study indicate that there are no clinically significant differences in decisional conflict when men are presented health information on prostate cancer screening via video, written materials, or the internet. Given the equivalence of the 3 methods, other factors need to be considered in deciding which method to use. Health professionals should provide patient health education materials via a method that is most convenient to the patient and their preferred learning style.

49 CFR Appendix C to Part 599 - Electronic Transaction Screen

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Electronic Transaction Screen C Appendix C to Part 599 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC... ASSISTANCE TO RECYCLE AND SAVE ACT PROGRAM Pt. 599, App. C Appendix C to Part 599—Electronic Transaction...

49 CFR Appendix C to Part 599 - Electronic Transaction Screen

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 7 2012-10-01 2012-10-01 false Electronic Transaction Screen C Appendix C to Part 599 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC... ASSISTANCE TO RECYCLE AND SAVE ACT PROGRAM Pt. 599, App. C Appendix C to Part 599—Electronic Transaction...

49 CFR Appendix C to Part 599 - Electronic Transaction Screen

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 7 2013-10-01 2013-10-01 false Electronic Transaction Screen C Appendix C to Part 599 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC... ASSISTANCE TO RECYCLE AND SAVE ACT PROGRAM Pt. 599, App. C Appendix C to Part 599—Electronic Transaction...

49 CFR Appendix C to Part 599 - Electronic Transaction Screen

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 7 2014-10-01 2014-10-01 false Electronic Transaction Screen C Appendix C to Part 599 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC... ASSISTANCE TO RECYCLE AND SAVE ACT PROGRAM Pt. 599, App. C Appendix C to Part 599—Electronic Transaction...

49 CFR Appendix C to Part 599 - Electronic Transaction Screen

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 7 2011-10-01 2011-10-01 false Electronic Transaction Screen C Appendix C to Part 599 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC... ASSISTANCE TO RECYCLE AND SAVE ACT PROGRAM Pt. 599, App. C Appendix C to Part 599—Electronic Transaction...

Reverberatory screen for a radiant burner

DOEpatents

Gray, Paul E.

1999-01-01

The present invention relates to porous mat gas fired radiant burner panels utilizing improved reverberatory screens. The purpose of these screens is to boost the overall radiant output of the burner relative to a burner using no screen and the same fuel-air flow rates. In one embodiment, the reverberatory screen is fabricated from ceramic composite material, which can withstand higher operating temperatures than its metallic equivalent. In another embodiment the reverberatory screen is corrugated. The corrugations add stiffness which helps to resist creep and thermally induced distortions due to temperature or thermal expansion coefficient differences. As an added benefit, it has been unexpectedly discovered that the corrugations further increase the radiant efficiency of the burner. In a preferred embodiment, the reverberatory screen is both corrugated and made from ceramic composite material.

Microgravity Passive Phase Separator

NASA Technical Reports Server (NTRS)

Paragano, Matthew; Indoe, William; Darmetko, Jeffrey

2012-01-01

A new invention disclosure discusses a structure and process for separating gas from liquids in microgravity. The Microgravity Passive Phase Separator consists of two concentric, pleated, woven stainless- steel screens (25-micrometer nominal pore) with an axial inlet, and an annular outlet between both screens (see figure). Water enters at one end of the center screen at high velocity, eventually passing through the inner screen and out through the annular exit. As gas is introduced into the flow stream, the drag force exerted on the bubble pushes it downstream until flow stagnation or until it reaches an equilibrium point between the surface tension holding bubble to the screen and the drag force. Gas bubbles of a given size will form a front that is moved further down the length of the inner screen with increasing velocity. As more bubbles are added, the front location will remain fixed, but additional bubbles will move to the end of the unit, eventually coming to rest in the large cavity between the unit housing and the outer screen (storage area). Owing to the small size of the pores and the hydrophilic nature of the screen material, gas does not pass through the screen and is retained within the unit for emptying during ground processing. If debris is picked up on the screen, the area closest to the inlet will become clogged, so high-velocity flow will persist farther down the length of the center screen, pushing the bubble front further from the inlet of the inner screen. It is desired to keep the velocity high enough so that, for any bubble size, an area of clean screen exists between the bubbles and the debris. The primary benefits of this innovation are the lack of any need for additional power, strip gas, or location for venting the separated gas. As the unit contains no membrane, the transport fluid will not be lost due to evaporation in the process of gas separation. Separation is performed with relatively low pressure drop based on the large surface area of the separating screen. Additionally, there are no moving parts, and there are no failure modes that involve fluid loss. A patent application has been filed.

Oral Cavity, Pharyngeal, and Laryngeal Cancer Screening (PDQ®)—Health Professional Version

Cancer.gov

Oral cavity, pharyngeal, and laryngeal cancer screening is not recommended as part of routine cancer screening. Get detailed information about screening, including the potential benefits and harms of screening for these cancers in this summary for clinicians.

Contrast-enhanced spectral mammography (CESM) versus MRI in the high-risk screening setting: patient preferences and attitudes.

PubMed

Phillips, Jordana; Miller, Matthew M; Mehta, Tejas S; Fein-Zachary, Valerie; Nathanson, Audrey; Hori, Wendy; Monahan-Earley, Rita; Slanetz, Priscilla J

Our study evaluates patient preferences toward screening CESM versus MRI. As part of a prospective study, high-risk patients had breast MRI and CESM. Patients completed an anonymous survey to evaluate preferences regarding the two modalities. 88% of participants completed the survey. 79% preferred CESM over MRI if the exams had equal sensitivity. 89% would be comfortable receiving contrast as part of an annual screening test. High-risk populations may accept CESM as a screening exam and may prefer it over screening MRI if ongoing trials demonstrate screening CESM to be clinically non-inferior MRI. Copyright © 2016 Elsevier Inc. All rights reserved.

Some potential material supply constraints in solar systems for heating and cooling of buildings and process heat. (A preliminary screening to identify critical materials)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Watts, R.L.; Gurwell, W.E.; Nelson, T.A.

1979-06-01

Nine Solar Heating and Cooling of Buildings (SHACOB) designs and three Agricultural and Industrial Process Heat (AIPH) designs have been studied to identify potential future material constraints to their large scale installation and use. The nine SHACOB and three AIPH systems were screened and found to be free of serious future material constraints. The screening was carried out for each individual system design assuming 500 million m/sup 2/ of collector area installed by the year 2000. Also, two mixed design scenarios, containing equal portions of each system design, were screened. To keep these scenarios in perspective, note that a billionmore » m/sup 2/ containing a mixture of the nine SHACOB designs will yield an annual solar contribution of about 1.3 Quads or will displace about 4.2 Quads of fossil fuel used to generate electricity. For AIPH a billion square meters of the mixed designs will yield about 2.8 Quads/year. Three materials were identified that could possibly restrain the deployment of solar systems in the specific scenarios investigated. They are iron and steel, soda lime glass and polyvinyl fluoride. All three of these materials are bulk materials. No raw material supply constraints were found.« less

An update of the JPL program to develop Li-SOCl2 cells

NASA Technical Reports Server (NTRS)

Halpert, S.; Ang, V.; Banes, R.; Dawson, S.; Frank, H.; Subbarao, S.; Whitcanack, L.

1985-01-01

The goal of producing spiral wound D cell was met. The cell design and electrodes, particularly the carbon cathodes were produced in-house. Also all parts were assembled, the welding performed, the electrolyte aided and the cells sealed in-house. The lithium capacity (theoretical) was 19.3 Ah and that of the SOCl2 in the 1.8 m LiAlCl4 electrolyte, 16.4 Ah (a greater excess of SOCl2 is necessary for safe high rate operation). The electrode surface area was 452 sq cm. The carbon electrode comprised Shawinigen Black/Teflon -30 (90/10 by weight) mixture 0.020 inches thick on an expanded metal screen prepared in the JPL laboratory. There were two tab connections to the cathode. The 0.0078 inch thick lithium foil was rolled into an expanded nickel screen. The separator was Mead 934-5 fiberglass material.

Intimate partner violence: office screening for victims and perpetrators of IPV.

PubMed

Chen, Ping-Hsin; Jacobs, Abbie; Rovi, Susan L D

2013-09-01

Intimate partner violence (IPV) affects more than 12 million individuals annually. Power and control are central concepts underlying abusive relationships. Physicians may see IPV victims, perpetrators, and their children for annual examinations, as well as for injuries and health conditions associated with abuse. In 2013, the US Preventive Services Task Force recommended that women of childbearing age (ie, 14 to 46 years) be screened for IPV. Brief, validated screening tools, such as the 4-item Hurt, Insult, Threaten, and Scream (HITS), can be used to facilitate screening. Physicians should always assess patients whose medical histories or presenting symptoms or injuries are consistent with abuse. Risk factors for IPV and consequences of abuse include general health conditions (eg, asthma, irritable bowel syndrome), reproductive issues (eg, gynecologic disorders, unintended pregnancies), psychological conditions (eg, depression, sleep disturbances), and risky health behaviors (eg, substance use, poor health care adherence). Tools for identifying perpetrators are under investigation. To prepare the practice to address IPV, physicians should educate themselves and staff and learn about community and national resources. By identifying and responding to IPV, clinicians may be able to reduce IPV and interrupt the intergenerational cycle of violence. Written permission from the American Academy of Family Physicians is required for reproduction of this material in whole or in part in any form or medium.

Flash fire propensity of materials

NASA Technical Reports Server (NTRS)

Hilado, C. J.; Cumming, H. J.

1977-01-01

Flash fire test results on 86 materials, evaluated using the USF flash fire screening test, are presented. The materials which appear least prone to flash fires are PVC, polyphenylene oxide and sulfide, and polyether and polyaryl sulfone; these did not produce flash fires under these particular test conditions. The principal value of these screening tests at the present time is in identifying materials which appear prone to flash fires, and in identifying which formulations of a generic material are more or less prone to flash fires.

High-throughput screening for thermoelectric sulphides by using crystal structure features as descriptors

NASA Astrophysics Data System (ADS)

Zhang, Ruizhi; Du, Baoli; Chen, Kan; Reece, Mike; Materials Research Insititute Team

With the increasing computational power and reliable databases, high-throughput screening is playing a more and more important role in the search of new thermoelectric materials. Rather than the well established density functional theory (DFT) calculation based methods, we propose an alternative approach to screen for new TE materials: using crystal structural features as 'descriptors'. We show that a non-distorted transition metal sulphide polyhedral network can be a good descriptor for high power factor according to crystal filed theory. By using Cu/S containing compounds as an example, 1600+ Cu/S containing entries in the Inorganic Crystal Structure Database (ICSD) were screened, and of those 84 phases are identified as promising thermoelectric materials. The screening results are validated by both electronic structure calculations and experimental results from the literature. We also fabricated some new compounds to test our screening results. Another advantage of using crystal structure features as descriptors is that we can easily establish structural relationships between the identified phases. Based on this, two material design approaches are discussed: 1) High-pressure synthesis of metastable phase; 2) In-situ 2-phase composites with coherent interface. This work was supported by a Marie Curie International Incoming Fellowship of the European Community Human Potential Program.

Methane production and hydrolysis kinetics in the anaerobic degradation of wastewater screenings.

PubMed

Cadavid-Rodríguez, L S; Horan, N

2013-01-01

Anaerobic biodegradability and hydrolysis rates of wastewater screenings were determined using the biochemical methane potential test at 37 °C. The extent and rate of screenings conversion to methane of this complex and particulate substrate were investigated and since two stages of hydrolysis were identified, corresponding to the different types of materials in screenings, a linear and non-linear model was used. No accumulation of intermediary products was observed and so it was possible to use the methane production rate and a linear model to estimate the hydrolysis rate in the first phase of hydrolysis. The measured values of 0.061-0.127 d(-1) are in the range reported for other comparable organic wastes. It was also observed that the inoculum-to-substrate ratio has a large impact on methane production rate of screenings. The difference in biodegradation rates from the materials in screenings and the overall hydrolysis could be represented by the modified Gompertz non-linear model which was able to describe the methane production rate of screenings with a high confidence. Screenings were found to have 52% biodegradability on average and this shows the potential for volatile solids destruction. A two-stage process with an improved hydrolysis rate is proposed to ensure that the full potential of the material is exploited.

CT Lung Cancer Screening Program Development: Part 2.

PubMed

Yates, Teri

2015-01-01

Radiology administrators must use innovative strategies around clinical collaboration and marketing to ensure that patients access the service in sufficient numbers. Radiology Associates of South Florida in collaboration with Baptist Health South Florida have developed a successful lung cancer screening program. The biggest factors in their success have been the affordability of their service and the quality of the program. Like mammography, lung cancer screening programs serve as an entry point to other services that generate revenue for the hospital. Patients may require further evaluation in the form of more imaging or surgical services for biopsy. Part 1 provided background and laid out fundamentals for starting a program. Part 2 focuses on building patient volume, marketing, and issues related to patient management after the screen is performed.

Esophageal Cancer Screening (PDQ®)—Health Professional Version

Cancer.gov

Esophageal cancer screening is not currently recommended as a part of routine cancer screening. Get detailed information about risk factors and the possible benefits and harms related to screening for esophageal cancer in this clinician summary.

Voyager electronic parts radiation program. Volume 2: Test requirements and procedures

NASA Technical Reports Server (NTRS)

Stanley, A. G.; Martin, K. E.; Price, W. E.

1978-01-01

Documents are presented outlining the conditions and requirements of the test program. The Appendixes are as follows: appendix A -- Electron Simulation Radiation Test Specification for Voyager Electronic Parts and Devices, appendix B -- Electronic Piece-Part Testing Program for Voyager, appendix C -- Test Procedure for Radiation Screening of Voyager Piece Parts, appendix D -- Boeing In Situ Test Fixture, and appendix E -- Irradiate - Anneal (IRAN) Screening Documents.

Rapid bacteriological screening of cosmetic raw materials by using bioluminescence.

PubMed

Nielsen, P; Van Dellen, E

1989-01-01

Incoming cosmetic raw materials are routinely tested for microbial content. Standard plate count methods require up to 72 h. A rapid, sensitive, and inexpensive raw material screening method was developed that detects the presence of bacteria by means of ATP (bioluminescence). With a 24-h broth enrichment, the minimum bacterial ATP detection threshold of 1 cfu/g sample can be achieved using purified firefly luciferin-luciferase and an ATP releasing reagent. By using this rapid screen, microbiologically free material may be released for production within 24 h, while contaminated material undergoes further quantitative and identification testing. In order for a raw material to be validated for this method it must be evaluated for (1) a potential nonmicrobial light-contributing reaction resulting in a false positive or, (2) degradation of the ATP giving a false negative, and (3) confirmation that the raw material has not overwhelmed the buffering capacity of the enrichment broth. The key criteria for a rapid screen was the sensitivity to detect less than one colony forming unit per g product, the speed to do this within 24 h, and cost efficiency. Bioluminescence meets these criteria. With an enrichment step, it can detect less than one cfu/g sample. After the enrichment step, analysis time per sample is approximately 2 min and the cost for material and reagents is less than one dollar per sample.

Evaluation of medicinal plants from Central Kalimantan for antimelanogenesis.

PubMed

Arung, Enos Tangke; Kusuma, Irawan Wijaya; Christy, Eva Oktoberiani; Shimizu, Kuniyoshi; Kondo, Ryuichiro

2009-10-01

In the course of searching for new materials to use as whitening agents, we screened 19 methanol extracts prepared from 14 medicinal plants from Central Kalimantan province, Indonesia. The screening methods used were the 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging assay, a tyrosinase inhibition assay, and a melanin formation inhibition assay using B16 melanoma cells. The extracts of Willughbeia coriacea (bark part of aerial root), Phyllanthus urinaria (root), Eleutherine palmifolia (bulb), Eusideroxylon zwageri (seed), Dendrophthoe petandra (aerial root), Passiflora foetida (stem), and Vitex pinnata (root) showed DPPH radical-scavenging activity of more than 70% at 100 microg/ml. The extracts of W. coriacea (bark part of aerial root), P. urinaria (root), and D. petandra (aerial root) showed tyrosinase inhibitory activity of more than 40% using L-tyrosine as a substrate at 500 microg/ml. The extracts of W. coriacea (bark part of aerial root) and D. petandra (aerial root) showed tyrosinase inhibitory activity of more than 40% using L-DOPA as a substrate at 500 microg/ml. The extracts of W. coriacea (bark part of aerial root, 200 microg/ml), Glochidion philippcum (aerial root, 200 and 300 microg/ml), E. palmifolia (bulb, 50 microg/ml), E. zwageri (seed, 100 microg/ml), D. petandra (aerial root, 200 microg/ml), Lansium domesticum (bark, 25 microg/ml), P. foetida (stem, fruit, 300 microg/ml), and Solanum torvum (root, 300 microg/ml) strongly inhibited the melanin production of B16 melanoma cells without significant cytotoxicity. These findings indicate that some medicinal plants from Central Kalimantan are potential ingredients for skin-whitening cosmetics if their safety can be confirmed.

Process evaluation of health fairs promoting cancer screenings.

PubMed

Escoffery, Cam; Liang, Shuting; Rodgers, Kirsten; Haardoerfer, Regine; Hennessy, Grace; Gilbertson, Kendra; Heredia, Natalia I; Gatus, Leticia A; Fernandez, Maria E

2017-12-18

Low income and uninsured individuals often have lower adherence to cancer screening for breast, cervical and colorectal cancer. Health fairs are a common community outreach strategy used to provide cancer-related health education and services. This study was a process evaluation of seven health fairs focused on cancer screening across the U.S. We conducted key-informant interviews with the fair coordinator and conducted baseline and follow-up surveys with fair participants to describe characteristics of participants as well as their experiences. We collected baseline data with participants at the health fairs and telephone follow-up surveys 6 months following the fair. Attendance across the seven health fairs ranged from 41 to 212 participants. Most fairs provided group or individual education, print materials and cancer screening during the event. Overall, participants rated health fairs as very good and participants reported that the staff was knowledgeable and that they liked the materials distributed. After the fairs, about 60% of participants, who were reached at follow-up, had read the materials provided and had conversations with others about cancer screening, and 41% talked to their doctors about screening. Based on findings from evaluation including participant data and coordinator interviews, we describe 6 areas in planning for health fairs that may increase their effectiveness. These include: 1) use of a theoretical framework for health promotion to guide educational content and activities provided, 2) considering the community characteristics, 3) choosing a relevant setting, 4) promotion of the event, 5) considerations of the types of services to deliver, and 6) evaluation of the health fair. The events reported varied in reach and the participants represented diverse races and lower income populations overall. Most health fairs offered education, print materials and onsite cancer screening. Participants reported general satisfaction with these events and were motivated through their participation to read educational materials or discuss screening with providers. Public health professionals can benefit from this process evaluation and recommendations for designing and evaluating health fairs.

Validation of the custo screen 400 ambulatory blood pressure-monitoring device according to the European Society of Hypertension International Protocol revision 2010

PubMed Central

Bramlage, Peter; Deutsch, Cornelia; Krüger, Ralf; Wolf, Andreas; Müller, Peter; Zwingers, Thomas; Beime, Beate; Mengden, Thomas

2014-01-01

Objective The aim of the present study was to validate the custo screen 400 ambulatory blood pressure-monitoring (ABPM) device according to the 2010 International Protocol revision of the European Society of Hypertension (ESH-IP). The device can be used for ABPM for up to 72 hours. Materials and methods Systolic and diastolic blood pressure (SBP and DBP, respectively) were sequentially measured in 33 adult subjects (13 males and 20 females) and compared with a standard mercury sphygmomanometer (two observers). A total of 99 comparison pairs were obtained. Results The custo screen 400 met the requirements of parts 1 and 2 of the ESH-IP revision 2010. The mean difference between the device and reference sphygmomanometer readings was −0.5±4.5 mmHg for SBP and −0.1±3.3 mmHg for DBP. All but one measurement were within the absolute difference of 10 mmHg between the device and the observers for SBP and DBP. The number of absolute differences between the device and the observers within a range of 5 mmHg was 84 of 99 readings for SBP, and 93 of 99 readings for DBP. Conclusion The custo screen 400 ABPM device met the requirements of the 2010 ESH-IP revision, and hence can be recommended for ABPM in adults. To our knowledge, the custo screen 400 is the first device to pass the revised ESH-IP 2010. PMID:24868162

Shape memory alloy wires turn composites into smart structures: I. Material requirements

NASA Astrophysics Data System (ADS)

Schrooten, Jan; Michaud, Veronique J.; Zheng, Yanjun; Balta-Neumann, J. Antonio; Manson, Jan-Anders E.

2002-07-01

Composites containing thin Shape Memory Alloy (SMA) wires show great potential as materials able to adapt their shape, thermal behavior or vibrational properties to external stimuli. The functional properties of SMA-composites are directly related to the constraining effect of the matrix on the reversible martensitic transformation of the embedded pre-strained SMA wires. The present work reports results of a concerted European effort towards a fundamental understanding of the manufacturing and design of SMA composites. This first part investigates the transformational behavior of constrained SMA wires and its translation into functional properties of SMA composites. Thermodynamic and thermomechanical experiments were performed on SMA wires. A model was developed to simulate the thermomechanical behavior of the wires. From the screening of potential wires it was concluded that NiTiCu, as well as R-phase NiTi appeared as best candidates. Requirements for the host composite materials were surveyed. A Kevlar-epoxy system was chosen. Finally, the quality of the SMA wire-resin interface was assessed by two different techniques. These indicated that a thin oxide layer seems to provide the best interfacial strength. A temperature window in which SMA composites can be safely used was also defined. The manufacturing and properties of the SMA composites will be discussed in Part II.

Esophageal Cancer Screening (PDQ®)—Patient Version

Cancer.gov

Esophageal cancer screening is not currently considered to be a routine part of cancer screening. Not all screening tests are helpful, and many have risks. Learn more about esophageal cancer risk factors and tests to detect it in this expert-reviewed summary.

Teleoperated robotic sorting system

DOEpatents

Roos, Charles E.; Sommer, Jr., Edward J.; Parrish, Robert H.; Russell, James R.

2008-06-24

A method and apparatus are disclosed for classifying materials utilizing a computerized touch sensitive screen or other computerized pointing device for operator identification and electronic marking of spatial coordinates of materials to be extracted. An operator positioned at a computerized touch sensitive screen views electronic images of the mixture of materials to be sorted as they are conveyed past a sensor array which transmits sequences of images of the mixture either directly or through a computer to the touch sensitive display screen. The operator manually "touches" objects displayed on the screen to be extracted from the mixture thereby registering the spatial coordinates of the objects within the computer. The computer then tracks the registered objects as they are conveyed and directs automated devices including mechanical means such as air jets, robotic arms, or other mechanical diverters to extract the registered objects.

Teleoperated robotic sorting system

DOEpatents

Roos, Charles E.; Sommer, Edward J.; Parrish, Robert H.; Russell, James R.

2000-01-01

A method and apparatus are disclosed for classifying materials utilizing a computerized touch sensitive screen or other computerized pointing device for operator identification and electronic marking of spatial coordinates of materials to be extracted. An operator positioned at a computerized touch sensitive screen views electronic images of the mixture of materials to be sorted as they are conveyed past a sensor array which transmits sequences of images of the mixture either directly or through a computer to the touch sensitive display screen. The operator manually "touches" objects displayed on the screen to be extracted from the mixture thereby registering the spatial coordinates of the objects within the computer. The computer then tracks the registered objects as they are conveyed and directs automated devices including mechanical means such as air jets, robotic arms, or other mechanical diverters to extract the registered objects.

Quantitative description on structure-property relationships of Li-ion battery materials for high-throughput computations

NASA Astrophysics Data System (ADS)

Wang, Youwei; Zhang, Wenqing; Chen, Lidong; Shi, Siqi; Liu, Jianjun

2017-12-01

Li-ion batteries are a key technology for addressing the global challenge of clean renewable energy and environment pollution. Their contemporary applications, for portable electronic devices, electric vehicles, and large-scale power grids, stimulate the development of high-performance battery materials with high energy density, high power, good safety, and long lifetime. High-throughput calculations provide a practical strategy to discover new battery materials and optimize currently known material performances. Most cathode materials screened by the previous high-throughput calculations cannot meet the requirement of practical applications because only capacity, voltage and volume change of bulk were considered. It is important to include more structure-property relationships, such as point defects, surface and interface, doping and metal-mixture and nanosize effects, in high-throughput calculations. In this review, we established quantitative description of structure-property relationships in Li-ion battery materials by the intrinsic bulk parameters, which can be applied in future high-throughput calculations to screen Li-ion battery materials. Based on these parameterized structure-property relationships, a possible high-throughput computational screening flow path is proposed to obtain high-performance battery materials.

Quantitative description on structure-property relationships of Li-ion battery materials for high-throughput computations.

PubMed

Wang, Youwei; Zhang, Wenqing; Chen, Lidong; Shi, Siqi; Liu, Jianjun

2017-01-01

Li-ion batteries are a key technology for addressing the global challenge of clean renewable energy and environment pollution. Their contemporary applications, for portable electronic devices, electric vehicles, and large-scale power grids, stimulate the development of high-performance battery materials with high energy density, high power, good safety, and long lifetime. High-throughput calculations provide a practical strategy to discover new battery materials and optimize currently known material performances. Most cathode materials screened by the previous high-throughput calculations cannot meet the requirement of practical applications because only capacity, voltage and volume change of bulk were considered. It is important to include more structure-property relationships, such as point defects, surface and interface, doping and metal-mixture and nanosize effects, in high-throughput calculations. In this review, we established quantitative description of structure-property relationships in Li-ion battery materials by the intrinsic bulk parameters, which can be applied in future high-throughput calculations to screen Li-ion battery materials. Based on these parameterized structure-property relationships, a possible high-throughput computational screening flow path is proposed to obtain high-performance battery materials.

Centrifugal Size-Separation Sieve for Granular Materials

NASA Technical Reports Server (NTRS)

Walton, Otis (Inventor); Dreyer, Christopher (Inventor); Riedel, Edward (Inventor)

2015-01-01

A centrifugal sieve and method utilizes centrifugal force in rapidly-rotated cylindrical or conical screens as the primary body force contributing to size segregation. Within the centrifugal acceleration field, vibration and/or shearing flows are induced to facilitate size segregation and eventual separation of the fines from the coarse material. Inside a rotating cylindrical or conical screen, a separately-rotated screw auger blade can be used to transport material along the rotating cylinder or conical wall and to induce shearing in the material.

Advancing Porous Silicon Biosensor Technology for Use in Clinical Diagnostics

NASA Astrophysics Data System (ADS)

Bonanno, Lisa Marie

Inexpensive and robust analytical techniques for detecting molecular recognition events are in great demand in healthcare, food safety, and environmental monitoring. Despite vast research in this area, challanges remain to develop practical biomolecular platforms that, meet the rigorous demands of real-world applications. This includes maintaining low-cost devices that are sensitive and specific in complex test specimens, are stable after storage, have short assay time, and possess minimal complexity of instrumentation for readout. Nanostructured porous silicon (PSi) material has been identified as an ideal candidate towards achieving these goals and the past decade has seen diverse proof-of-principle studies developing optical-based sensing techniques. In Part 1 of this thesis, the impact of surface chemistry and PSi morphology on detection sensitivity of target molecules is investigated. Initial proof-of-concept that PSi devices facilitate detection of protein in whole blood is demonstrated. This work highlights the importance of material stability and blocking chemistry for sensor use in real world biological samples. In addition, the intrinisic filtering capability of the 3-D PSi morphology is shown as an advantage in complex solutions, such as whole blood. Ultimately, this initial work identified a need to improve detection sensitivity of the PSI biosensor technique to facilitate clinical diagnostic use over relevant target concentration ranges. The second part of this thesis, builds upon sensitivity challenges that are highlighted in the first part of the thesis and development of a surface-bound competitive inhibition immunoassay facilitated improved detection sensitivity of small molecular weight targets (opiates) over a relevant clinical concentration range. In addition, optimization of assay protocol addressed issues of maintaining stability of sensors after storage. Performance of the developed assay (specificity and sensitivity) was then validated in a blind clinical study that screened real patient urine samples (n=70) for opiates in collaboration with Strong Memorial Hospital Clinical Toxicology Laboratory. PSI sensor results showed improved clinical specificity over current commercial opiate immunoassay techniques and therefore, identified potential for a reduction in false-negative and false-positive screening results. Here, we demonstrate for the first time, successful clinical capability of a PSi sensor to detect opiates as a model target in real-world patient samples. The final part of this thesis explores novel sensor designs to leverage the tunable optical properties of PSi photonic devices and facilitate colorimetric readout of molecular recognition events by the unaided eye. Such a design is ideal for uncomplicated diagnostic screening at point-of-care as no instrumentation is needed for result readout. The photonic PSi transducers were integrated with target analyte-responsive hydrogels (TRAP-gels) that upon exposure to a target solution would swell and dissolute, inducing material property changes that were optically detected by the incorporated PSi transducer. This strategy extends target detection throughout the 3-ll internal volume of the PSi, improving upon current techniques that limit detection to the surface area (2-ll) of PSi. Work to acheive this approach involved design of TRAP-gel networks, polymer synthesis and characterization techniques, and optical characterization of the hybrid hydrogel-PSi material sensor. Successful implementation of a hybrid sensor design was exhibited for a. model chemical target (reducing agent), in which visual colorimetric change from red to green was observed for above-threshold exposure to the chemical target. In addition, initial proof-of-concept of an opiate responsive TRAP-gel is also demonstrated where cross-links are formed between antibody-antigen interactions and exposure to opiates induces bulk gel dissolution.

Systematic Screening at the Elementary Level: Considerations for Exploring and Installing Universal Behavior Screening

ERIC Educational Resources Information Center

Oakes, Wendy Peia; Lane, Kathleen Lynne; Ennis, Robin Parks

2016-01-01

This descriptive study reports data from one elementary school whose leadership team explored and installed systematic behavior screening as part of their tiered model of prevention. The authors compared student performance on two school-selected screening tools: the Student Risk Screening Scale for Internalizing and Externalizing (SRSS-IE) and…

Development of a Language Screening Instrument for Swedish 4-Year-Olds

ERIC Educational Resources Information Center

Lavesson, Ann; Lövdén, Martin; Hansson, Kristina

2018-01-01

Background: The Swedish Program for health surveillance of preschool children includes screening of language and communication abilities. One important language screening is carried out at age 4 years as part of a general screening conducted by health nurses at child health centres. The instruments presently in use for this screening mainly focus…

Liver (Hepatocellular) Cancer Screening (PDQ®)—Patient Version

Cancer.gov

Liver (hepatocellular) cancer screening is not currently recommended as a routine part of cancer screening. Not all screening tests are helpful, and many have risks. Learn more about liver cancer and the tests used to detect it in this expert-reviewed summary.

Fungal degradation of polyhydroxyalkanoates and a semiquantitative assay for screening their degradation by terrestrial fungi.

PubMed

Matavulj, M; Molitoris, H P

1992-12-01

The current problems with decreasing fossile resources and increasing environmental pollution by petrochemical-based plastics have stimulated investigations to find biosynthetic materials which are also biodegradable. Bacterial reserve materials such as polyhydroxyalkanoates (PHA) have been discovered to possess thermoplastic properties and can be synthesized from renewable resources. Poly-beta-hydroxybutyric acid (PHB) is at present the most promising PHA; and BIOPOL, its copolymer with poly-beta-hydroxy-valerate (PHV), is already industrially produced (ICI, UK), and used as packaging material (WELLA, FRG). According to the literature, PHA degradation has so far mainly been observed in bacteria; only under certain environmental conditions has fungal degradation of PHAs been indicated. Since fungi constitute an important part of microbial populations participating in degradation processes, a simple screening method for fungal degradation of BIOPOL, a PHA-based plastic, was developed. Several media with about 150 fungal strains from different terrestrial environments and belonging to different systematic and ecological groups were used. PHA depolymerization was tested on three PHB-based media, each with 0.1% BIOPOL or PHB homopolymer causing turbidity of the medium. The media contained either a comparatively low or high content of organic carbon (beside PHA) or were based on mineral medium with PHA as the principal source of carbon. The degradation activity was detectable due to formation of a clear halo around the colony (Petri plates) or a clear zone under the colony (test tubes).(ABSTRACT TRUNCATED AT 250 WORDS)

49 CFR 40.229 - What devices are used to conduct alcohol screening tests?

Code of Federal Regulations, 2010 CFR

2010-10-01

... are allowed to use to conduct alcohol screening tests under this part. You may use an ASD that is on the NHTSA CPL for DOT alcohol tests only if there are instructions for its use in this part. An ASD...

49 CFR 40.229 - What devices are used to conduct alcohol screening tests?

Code of Federal Regulations, 2011 CFR

2011-10-01

... are allowed to use to conduct alcohol screening tests under this part. You may use an ASD that is on the NHTSA CPL for DOT alcohol tests only if there are instructions for its use in this part. An ASD...

Particle size and shape distributions of hammer milled pine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Westover, Tyler Lott; Matthews, Austin Colter; Williams, Christopher Luke

2015-04-01

Particle size and shape distributions impact particle heating rates and diffusion of volatized gases out of particles during fast pyrolysis conversion, and consequently must be modeled accurately in order for computational pyrolysis models to produce reliable results for bulk solid materials. For this milestone, lodge pole pine chips were ground using a Thomas-Wiley #4 mill using two screen sizes in order to produce two representative materials that are suitable for fast pyrolysis. For the first material, a 6 mm screen was employed in the mill and for the second material, a 3 mm screen was employed in the mill. Bothmore » materials were subjected to RoTap sieve analysis, and the distributions of the particle sizes and shapes were determined using digital image analysis. The results of the physical analysis will be fed into computational pyrolysis simulations to create models of materials with realistic particle size and shape distributions. This milestone was met on schedule.« less

Stretching Screens and Imaginations.

ERIC Educational Resources Information Center

Douthwaite, Shelaugh

1983-01-01

Secondary students utilize a simplified technique to make silk screen prints, which can be printed onto T-shirts. The only materials needed from art suppliers are a few squeegees and a few yards of polyester screen mesh. (RM)

Ovarian, Fallopian Tube, and Primary Peritoneal Cancer Screening (PDQ®)—Health Professional Version

Cancer.gov

Ovarian, fallopian tube, and primary peritoneal cancer screening is not currently recommended as part of routine cancer screening. Get detailed information about the potential benefits and harms of screening tests used in these cancers in this summary for clinicians.

Enhanced optical security by using information carrier digital screening

NASA Astrophysics Data System (ADS)

Koltai, Ferenc; Adam, Bence

2004-06-01

Jura has developed different security features based on Information Carrier Digital Screening. Substance of such features is that a non-visible secondary image is encoded in a visible primary image. The encoded image will be visible only by using a decoding device. One of such developments is JURA's Invisible Personal Information (IPI) is widely used in high security documents, where personal data of the document holder are encoded in the screen of the document holder's photography and they can be decoded by using an optical decoding device. In order to make document verification fully automated, enhance security and eliminate human factors, digital version of IPI, the D-IPI was developed. A special 2D-barcode structure was designed, which contains sufficient quantity of encoded digital information and can be embedded into the photo. Other part of Digital-IPI is the reading software, that is able to retrieve the encoded information with high reliability. The reading software developed with a specific 2D structure is providing the possibility of a forensic analysis. Such analysis will discover all kind of manipulations -- globally, if the photography was simply changed and selectively, if only part of the photography was manipulated. Digital IPI is a good example how benefits of digital technology can be exploited by using optical security and how technology for optical security can be converted into digital technology. The D-IPI process is compatible with all current personalization printers and materials (polycarbonate, PVC, security papers, Teslin-foils, etc.) and can provide any document with enhanced security and tamper-resistance.

Lung Cancer Screening Guidelines: How Readable Are Internet-Based Patient Education Resources?

PubMed

Hansberry, David Richard; White, Michael D; D'Angelo, Michael; Prabhu, Arpan V; Kamel, Sarah; Lakhani, Paras; Sundaram, Baskaran

2018-04-30

Following the findings of the National Lung Screening Trial, several national societies from multiple disciplines have endorsed the use of low-dose chest CT to screen for lung cancer. Online patient education materials are an important tool to disseminate information to the general public regarding the proven health benefits of lung cancer screening. This study aims to evaluate the reading level at which these materials related to lung cancer screening are written. The four terms "pulmonary nodule," "radiation," "low-dose CT," and "lung cancer screening" were searched on Google, and the first 20 online resources for each term were downloaded, converted into plain text, and analyzed using 10 well-established readability scales. If the websites were not written specifically for patients, they were excluded. The 80 articles were written at a 12.6 ± 2.7 (mean ± SD) grade level, with grade levels ranging from 4.0 to 19.0. Of the 80 articles, 62.5% required a high school education to comprehend, and 22.6% required a college degree or higher (≥ 16th grade) to comprehend. Only 2.5% of the analyzed articles adhered to the recommendations of the National Institutes of Health and American Medical Association that patient education materials be written at a 3rd- to 7th-grade reading level. Commonly visited online lung cancer screening-related patient education materials are written at a level beyond the general patient population's ability to comprehend and may be contributing to a knowledge gap that is inhibiting patients from improving their health literacy.

Assessment of newborn screening parent education materials.

PubMed

Arnold, Connie L; Davis, Terry C; Frempong, Janet Ohene; Humiston, Sharon G; Bocchini, Anna; Kennen, Estela M; Lloyd-Puryear, Michele

2006-05-01

The purpose of this study was to measure the readability and user-friendliness (clarity, complexity, organization, appearance, and cultural appropriateness of materials) of parent education brochures on newborn screening. We studied English-language versions of the brochures that state newborn screening programs prepare and distribute. We obtained brochures from 48 states and Puerto Rico. We evaluated each brochure for readability with the Flesch reading ease formula. User-friendliness of the brochures was assessed with an instrument we created that contained 22 specific criteria grouped into 5 categories, ie, layout, illustrations, message, manageable information, and cultural appropriateness. Most current newborn screening brochures should be revised to make them more readable and user-friendly for parents. Ninety-two percent of brochures were written at a reading level that is higher than the average reading level of US adults (eighth-grade level). In most brochures, the essential information for parents was buried. Although all brochures were brief and focused on the newborn screening tests being performed, 81% needed improvement in getting to the point quickly and making it easy for parents to identify what they needed to know or to do. None of the brochures scored high in all 22 criteria on the user-friendliness checklist. Parent education materials about newborn screening should be revised to be easier to read and more user-friendly, by lowering the reading difficulty to eighth-grade level and focusing on issues such as layout, illustrations, message, information, and cultural appropriateness. It is important that state newborn screening programs and organizations work with parents to develop and to evaluate materials to ensure that they are user-friendly.

Accuracy of a bedside dysphagia screening: a comparison of registered nurses and speech therapists.

PubMed

Weinhardt, Janice; Hazelett, Susan; Barrett, Dawn; Lada, Robert; Enos, Trish; Keleman, Rick

2008-01-01

Evidence-based guidelines suggest that stroke patients should be screened for dysphagia before oral intake. The purpose of this study was to validate a dysphagia screening tool comparing registered nurses (RNs) with speech therapists (STs). All stroke unit patients who received predetermined scores on specific items of the National Institutes of Health Stroke Scale were eligible for screening. The trial consisted of three parts (with swallow, cough, and vocal quality observed during each part): 1 teaspoon lemon ice, 1 teaspoon applesauce, and 1 teaspoon water RNs performed five screenings that were compared with independent screenings performed on the same patient within 1 hour by a speech therapist (ST). Eighty-three paired screenings were completed, with 94% agreement between the RNs and the STs. This screening identifies patients who are able to swallow and can eat from a safe menu until formally evaluated by an ST while maintaining nothing by mouth (NPO) status for those at risk for aspiration.

Holistic computational structure screening of more than 12,000 candidates for solid lithium-ion conductor materials

NASA Astrophysics Data System (ADS)

Sendek, Austin D.; Yang, Qian; Cubuk, Ekin D.; Duerloo, Karel-Alexander N.; Cui, Yi; Reed, Evan J.

We present a new type of large-scale computational screening approach for identifying promising candidate materials for solid state electrolytes for lithium ion batteries that is capable of screening all known lithium containing solids. To predict the likelihood of a candidate material exhibiting high lithium ion conductivity, we leverage machine learning techniques to train an ionic conductivity classification model using logistic regression based on experimental measurements reported in the literature. This model, which is built on easily calculable atomistic descriptors, provides new insight into the structure-property relationship for superionic behavior in solids and is approximately one million times faster to evaluate than DFT-based approaches to calculating diffusion coefficients or migration barriers. We couple this model with several other technologically motivated heuristics to reduce the list of candidate materials from the more than 12,000 known lithium containing solids to 21 structures that show promise as electrolytes, few of which have been examined experimentally. Our screening utilizes structures and electronic information contained in the Materials Project database. This work is supported by an Office of Technology Licensing Fellowship through the Stanford Graduate Fellowship Program and a seed Grant from the TomKat Center for Sustainable Energy at Stanford.

Virtual screening of inorganic materials synthesis parameters with deep learning

NASA Astrophysics Data System (ADS)

Kim, Edward; Huang, Kevin; Jegelka, Stefanie; Olivetti, Elsa

2017-12-01

Virtual materials screening approaches have proliferated in the past decade, driven by rapid advances in first-principles computational techniques, and machine-learning algorithms. By comparison, computationally driven materials synthesis screening is still in its infancy, and is mired by the challenges of data sparsity and data scarcity: Synthesis routes exist in a sparse, high-dimensional parameter space that is difficult to optimize over directly, and, for some materials of interest, only scarce volumes of literature-reported syntheses are available. In this article, we present a framework for suggesting quantitative synthesis parameters and potential driving factors for synthesis outcomes. We use a variational autoencoder to compress sparse synthesis representations into a lower dimensional space, which is found to improve the performance of machine-learning tasks. To realize this screening framework even in cases where there are few literature data, we devise a novel data augmentation methodology that incorporates literature synthesis data from related materials systems. We apply this variational autoencoder framework to generate potential SrTiO3 synthesis parameter sets, propose driving factors for brookite TiO2 formation, and identify correlations between alkali-ion intercalation and MnO2 polymorph selection.

Screening and Assessment of Kindergarten Children with Developmental Risks.

ERIC Educational Resources Information Center

Moore, C. Rochelle; Sunal, Cynthia S.

This paper reports the implementation of teacher-made, early education screening practices and materials for identifying pre-kindergarten and kindergarten children with developmental risks. A total of 105 children were screened in the spring of 1979 using screening tests devised by the researcher, another kindergarten teacher and a special…

Seasonal variation and bioactivity of the essential oils of two Juniperus species against Aedes (Stegomyia) albopictus (Skuse, 1894).

PubMed

Evergetis, E; Michaelakis, A; Papachristos, D P; Badieritakis, E; Kapsaski-Kanelli, V N; Haroutounian, S A

2016-06-01

The seasonal variation in respect to the yield and chemical composition of 24 essential oils (EOs) isolated from various parts (leaves and fruits) of two indigenous Greece Juniperus species (family Cupressaceae), namely Juniperus drupacea and Juniperus phoenica, were determined by GC and GC/MS analysis. The larvicidal properties of these EOs were evaluated against 3rd and early 4th instar larvae of Aedes (Stegomyia) albopictus (Skuse, 1894) at one screening dose (29 mg L(-1)). Moreover, the repellent activity against adult mosquitoes was also evaluated at one screening dose. The analytical data indicated that the EOs mainly consisted of monoterpenes, mostly cyclic and only occasionally aliphatic and to a lesser percent diterpenes. The EOs yield was sharply increased when the plant material was subjected to pre-treatment before steam distillation. Finally, the influence of plant material collection period on their yield and chemical content was also determined. Bioactivity assessments indicated that three EOs possess very potent larvicidal properties and 12 EOs display significant repellent activities since they were proved to be "DEET-like." Therefore, they represent an inexpensive source of natural mixtures of larvicidal and repellent mixture of natural compounds, with potentials for application for utilization in mosquito control schemes in order to prevent the expansion of viral infections.

Issues in Geriatric Care: Alzheimer Disease.

PubMed

Kemle, Kathy; Ackermann, Richard J

2018-05-01

Alzheimer disease (AD) occurs in 8.8% of older US adults and is the sixth leading cause of death among older adults. Medicare annual wellness visits require screening for cognitive impairment but do not specify screening methods. Numerous screening instruments are available. If results are positive, evaluation with well-validated assessment tools is needed. If cognitive impairment is confirmed, laboratory tests and imaging studies should be obtained to rule out reversible etiologies. If patients meet diagnostic criteria for AD, clinicians should educate patients and families on the expected course and help them complete advance directives. Nutrition, behavioral issues, patient safety issues, and physical activity should be addressed. Physicians should screen for and manage concomitant depression. Troublesome behaviors should be managed with nonpharmacotherapeutic measures first. Pain should be considered as a possible cause of behavior. Antipsychotics should be reserved for select cases in which safety is an issue. Drugs for improving cognition can be prescribed but these typically result in short-term improvements and do not prevent disease progression. These drugs should be discontinued if adverse effects occur or when dementia worsens. Research on anti-amyloid and anti-tau protein drugs is promising but has not yet led to useful breakthroughs. Written permission from the American Academy of Family Physicians is required for reproduction of this material in whole or in part in any form or medium.

[Meaningful words? Cancer screening communication in Italy].

PubMed

Cogo, Carla; Petrella, Marco

2012-01-01

Over the last ten years, Italian work groups of communication within The National Centre for Screening Monitoring have been working on various aspects of communication in screening: quality surveys, information materials, guidelines, websites, and training. This has been done taking into account that good quality information must be clear, accessible, up to date, evidence based, clear about its limitations and capable of indicating further sources of information. Whenever possible, information has been developed in collaboration with the target groups: citizens but also health professionals. However, if good quality information must be clear about benefits and harms, the communication of quantitative information is particularly complex in cancer screening. Moreover, receiving more information on risks and benefits does not seem to modify participation. In addition, more balanced information does not entail that a person will include it in the decision process.Throughout several focus groups, citizens have made it clear that the information received from the programmes was only a part of the decisional process in which other elements were just as, if not more, important: trust in doctors, family and friends, perception of health authority efficiency, personal experiences, inconsistencies in information or public disagreements with other credible sources. Such elements can be seen as an opportunity to strengthen partnerships with professional and advocacy groups and to cooperate more efficiently with media and specialists from different fields.

Interplay of screening and superconductivity in low-dimensional materials

NASA Astrophysics Data System (ADS)

Schönhoff, G.; Rösner, M.; Groenewald, R. E.; Haas, S.; Wehling, T. O.

2016-10-01

A quantitative description of Coulomb interactions is developed for two-dimensional superconducting materials, enabling us to compare intrinsic with external screening effects, such as those due to substrates. Using the example of a doped monolayer of MoS2 embedded in a tunable dielectric environment, we demonstrate that the influence of external screening is limited to a length scale, bounded from below by the effective thickness of the quasi-two-dimensional material and from above by its intrinsic screening length. As a consequence, it is found that unconventional Coulomb-driven superconductivity cannot be induced in MoS2 by tuning the substrate properties alone. Our calculations of the retarded Morel-Anderson Coulomb potential μ* reveal that the Coulomb interactions, renormalized by the reduced layer thickness and the substrate properties, can shift the onset of the electron-phonon driven superconducting phase in monolayer MoS2 but do not significantly affect the critical temperature at optimal doping.

The Sheffield RNAi Screening Facility (SRSF): portfolio growth and technology development.

PubMed

Brown, Stephen

2014-05-01

The Sheffield RNAi Screening Facility (SRSF) (www.rnai.group.shef.ac.uk) was established in 2008 with Wellcome Trust and University of Sheffield funding, with the task to provide the first UK RNAi screening resource for academic groups interested in identifying genes required in a diverse range of biological processes using Drosophila cell culture. The SRSF has carried out a wide range of screens varying in sizes from bespoke small-scale libraries, targeting a few hundred genes, to high-throughput, genome-wide studies. The SRSF has grown and improved with a dedicated partnership of its academic customers based mainly in the UK. We are part of the UK Academics Functional Genomics Network, participating in organizing an annual meeting in London and are part of the University of Sheffield's D3N (www.d3n.org.uk), connecting academics, biotech and pharmaceutical companies with a multidisciplinary network in Drug Discovery and Development. Recently, the SRSF has been funded by the Yorkshire Cancer Research Fund to perform genome-wide RNAi screens using human cells as part of a core facility for regional Yorkshire Universities and screens are now underway. Overall the SRSF has carried out more than 40 screens from Drosophila and human cell culture experiments.

Development of a Robust Static Punch Experiment for Screening Unprocessed Ultra-High Molecular Weight Polyethylene (UHMWPE) Unidirectional Cross-Ply Material

DTIC Science & Technology

2014-09-01

Cross-Ply Material by David Gray, Robert Kaste , and Paul Moy ARL-TR-7090 September 2014...Screening Unprocessed Ultra-High Molecular Weight Polyethylene (UHMWPE) Unidirectional Cross-Ply Material David Gray, Robert Kaste , and Paul...ELEMENT NUMBER 6. AUTHOR(S) David Gray, Robert Kaste , and Paul Moy 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7

Development of a Colorectal Cancer Screening Intervention for Iranian Adults: Appling Intervention Mapping

PubMed

Besharati, Fereshteh; Karimi-Shahanjarini, Akram; Hazavehei, Seyed Mohammad Mehdi; Bashirian, Saeid; Bagheri, Fahimeh; Faradmal, Javad

2017-08-27

Background: While the incidence rate of the colorectal cancer (CRC) has been increasing over the last three decades in Iran, very limited interventions to increase CRC screening have been developed for Iranian population. The purpose of this study was to describe the use of Intervention Mapping (IM) for applying theory and evidence and considering local contexts to develop a CRC screening program among adults in Iran. Materials and Methods: From April 2014 to July 2016 following the IM process, six steps were formulated and implemented. First a need assessment was conducted involving relevant stakeholders and using focus groups discussions (n=10), individual interviews (n=20), and a household survey (n= 480). Then a matrix of change objectives was developed for each behavioral outcome and theoretical methods and their practical applications were identified to guide intervention development and implementation. A multi-component intervention was developed and piloted. Decision on suitable parts of intervention was made based on feedback of pilot study. Finally, evaluation plan including process and outcome evaluation was generated and conducted to inform future scale up. Results: The needs assessment highlighted factors affecting CRC screening including knowledge, self efficacy, social support and perceived benefit and barriers (financial problems, fear of detection of cancer and etc). Results of needs assessment were used to develop next steps IM. The program utilized methods like information delivery, modeling, and persuasion. Practical applications included video presentation, group discussion, role playing and postcards.This program was assessed through a cluster-randomized controlled trial. Results showed that there were significant differences in CRC screening uptake between intervention groups and control (P<0.001). Conclusions: IM is a useful process in the design of a theory-based intervention addressing CRC screening among Iranian population. Creative Commons Attribution License

Capture Their Attention: Capturing Lessons Using Screen Capture Software

ERIC Educational Resources Information Center

Drumheller, Kristina; Lawler, Gregg

2011-01-01

When students miss classes for university activities such as athletic and academic events, they inevitably miss important class material. Students can get notes from their peers or visit professors to find out what they missed, but when students miss new and challenging material these steps are sometimes not enough. Screen capture and recording…

DEVELOPMENT OF ECOLOGICAL SOIL SCREENING LEVELS FOR SOIL INVERTEBRATES AND PLANTS FROM PEER-REVIEWED LITERATURE

EPA Science Inventory

The U.S. Environmental Protection Agency, as part of a collaborative effort among government and industry representatives, is developing Ecologic Soil Screening Levels (Eco-SSLs) for approximately 25 of the most common pollutants found at Superfund sites. As part of this effort, ...

The Validity of the Baby and Infant Screen for Children with aUtIsm Traits: Part 1 (BISCUIT-- Part 1)

ERIC Educational Resources Information Center

Matson, Johnny L.; Wilkins, Jonathan; Fodstad, Jill C.

2011-01-01

A top priority in the field of autism spectrum disorders (ASD) is the development of precise early diagnostic tools that can be completed with minimal time and training. We report on the convergent and divergent validity of the Baby and Infant Screen for Children with aUtIsm Traits (BISCUIT), specifically the BISCUIT-Part 1. Previous research with…

Irradiate-anneal screening of total dose effects in semiconductor devices. [radiation hardening of spacecraft components of Mariner spacecraft

NASA Technical Reports Server (NTRS)

Stanley, A. G.; Price, W. E.

1976-01-01

An extensive investigation of irradiate-anneal (IRAN) screening against total dose radiation effects was carried out as part of a program to harden the Mariner Jupiter/Saturn 1977 (MJS'77) spacecraft to survive the Jupiter radiation belts. The method consists of irradiating semiconductor devices with Cobalt-60 to a suitable total dose under representative bias conditions and of separating the parts in the undesired tail of the distribution from the bulk of the parts by means of a predetermined acceptance limit. The acceptable devices are then restored close to their preirradiation condition by annealing them at an elevated temperature. IRAN was used when lot screen methods were impracticable due to lack of time, and when members of a lot showed a diversity of radiation response. The feasibility of the technique was determined by testing of a number of types of linear bipolar integrated circuits, analog switches, n-channel JFETS and bipolar transistors. Based on the results of these experiments a number of device types were selected for IRAN of flight parts in the MJS'77 spacecraft systems. The part types, screening doses, acceptance criteria, number of parts tested and rejected as well as the program steps are detailed.

Conducting Universal Complete Mental Health Screening via Student Self-Report

ERIC Educational Resources Information Center

Moore, Stephanie A.; Widales-Benitez, Oscar; Carnazzo, Katherine W.; Kim, Eui Kyung; Moffa, Kathryn; Dowdy, Erin

2015-01-01

Universal screening is increasingly becoming part of prevention and early intervention best practice in schools. Although the number of schools engaging in universal screening has increased over the past decade, emotional and behavioral problems are often their primary focus. Problem-focused screening, however, does not address positive…

42 CFR 410.17 - Cardiovascular disease screening tests.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 2 2011-10-01 2011-10-01 false Cardiovascular disease screening tests. 410.17... § 410.17 Cardiovascular disease screening tests. (a) Definition. For purposes of this subpart, the... Part B covers cardiovascular disease screening tests when ordered by the physician who is treating the...

42 CFR 410.17 - Cardiovascular disease screening tests.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 2 2012-10-01 2012-10-01 false Cardiovascular disease screening tests. 410.17... § 410.17 Cardiovascular disease screening tests. (a) Definition. For purposes of this subpart, the... Part B covers cardiovascular disease screening tests when ordered by the physician who is treating the...

42 CFR 410.17 - Cardiovascular disease screening tests.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 2 2013-10-01 2013-10-01 false Cardiovascular disease screening tests. 410.17... § 410.17 Cardiovascular disease screening tests. (a) Definition. For purposes of this subpart, the... Part B covers cardiovascular disease screening tests when ordered by the physician who is treating the...

42 CFR 410.17 - Cardiovascular disease screening tests.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 2 2014-10-01 2014-10-01 false Cardiovascular disease screening tests. 410.17... § 410.17 Cardiovascular disease screening tests. (a) Definition. For purposes of this subpart, the... Part B covers cardiovascular disease screening tests when ordered by the physician who is treating the...

42 CFR 410.17 - Cardiovascular disease screening tests.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Cardiovascular disease screening tests. 410.17... § 410.17 Cardiovascular disease screening tests. (a) Definition. For purposes of this subpart, the... Part B covers cardiovascular disease screening tests when ordered by the physician who is treating the...

Recycling of a fine, heavy fluff automobile shredder residue by density and differential fragmentation.

PubMed

Gent, M R; Menéndez, M; Muñiz, H; Torno, S

2015-09-01

A compilation of the physical properties of materials which might typically occur in automobile shredder residue and an analysis of their suitability for the separation of materials in fine (<15mm) heavy fluff ASR (fhf-ASR) is presented. Differences in density and resistance to crushing of fhf-ASR materials were identified as potentially the most suitable low cost, technologically simple means for the separating this waste into its three principal components - metals, minerals (glass/stones) and organics (plastics). Results presented of laboratory scale tests demonstrate that fhf-ASR can in large part be separated into three principal components. Tests were conducted with 0.63-2.0mm and 2-10mm fractions. Recovery of plastics by density separations were conducted with water only jigs for the 2-10mm fraction and shaker tables for the 0.63-2mm fraction. Comparisons are presented of the separations of glass and stones from metals obtained by linear screening and vibratory screening of roller mill and impact mill crushing products of the high density 2-10mm fraction. Equipment used for these tests are of a laboratory or demonstrative scale. It is reasonable to anticipate that industrial scale processing would produce significantly better results. The 2-15mm fraction was found to constitute 91.6% of the fhf-ASR sampled. The metals content of the 2-10mm portion of this fraction was upgraded from 2.5% to 31% and 76.9% with recoveries varying inversely with grade from 91.9% to 40.1%. From 63.6% to 17.1% with a recovery of 93.5% of the organic materials. A residual product of fine sand of crushed glass/stones of 99.4% purity recovered 71.3% of these. Copyright © 2015 Elsevier Ltd. All rights reserved.

MYCOLOGICAL ANALYSIS AND AFLATOXIN B1 CONTAMINANT ESTIMATION OF HERBAL DRUG RAW MATERIALS

PubMed Central

Rajeshwari, Puttaswamy; Raveesha, KoteshwarAnandrao

2016-01-01

Background: The present study explores the fungal contamination of important herbal drug raw materials (HDRM), which are widely used in the preparation of many herbal drugs. Understanding of the microbial contamination status of HDRM is one of the important steps to ensure the safety and efficacy of herbal drugs. Materials and Methods: Eighteen samples of six herbal drug raw materials (HDRM) viz., Acorus calamus Linn., Cassia angustifolia Vahl., Centella asiatica (Linn.) Urban, Myristica fragrans Houtt., Tinospora cardifolia (Wild) Miers and Withania somnifera (Linn.) Dunal, were screened for fungal contamination, by employing serial dilution method. All the isolates of Aspergillus flavus were screened for their ability to produce aflatoxin B1 (AB1) and highly contaminated samples were subjected to AB1 estimation by using Thin Layer Chromatography (TLC), spectrophotometric method and occurrence of Aflatoxin B1 was confirmed by Liquid Chromatography-Mass Spectrometry analysis (LCMS). Results: A total of 302 isolates of 42 fungal species belonging to 17 genera were found in association with test the samples. More than 61% of A. flavus isolates tested positive for production of AB1 and highest yield recorded was 5008.20 ppb from the isolates of T. cordifolia. Amongthesix highly contaminated samples three samples tested positive for AB1. Highest AB1 was recorded from T. cordifolia (104.19 μg/kg), followed by A. calamus (13.73 μg/kg) and M. fragrans (12.02 μg/kg). Conclusion: Assessment of fungal and mycotoxin contamination should be a part of the quality check while selecting HDRM for manufacture of herbal products. Safe processing and storage practices are necessary. PMID:28487902

Fabrication and long-wavelength characterization of neat and chemically modified graphene

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kalugin, Nikolai G.

2014-03-31

Graphene, a single- or several layer-thick carbon, attracts significant research activity because of its exceptional material properties. Graphene is a promising material for optoelectronic applications. Neat graphene demonstrates potential as a material for long wavelength photodetectors working at elevated temperatures. Chemical modification of graphene opens up many new applications of this material in electronics, in new composite materials, and in new catalysts for different chemical processes. Chemical vapor deposition-grown large-area graphene can be successfully modified with the creation of benzyne attachments. The investigation of microwave properties is an important part of graphene research. Two variants of near-field long wavelength microscopymore » were found efficient with graphene. Measurements with a probe formed by an electrically open end of a 4 GHz half-lambda parallel-strip transmission line resonator allow the implementation of an electrodynamic model of graphene microwave impedance. The results of near-field scanning superconducting quantum interference device (SQUID) RF microscopy of graphite and graphene at 200 MHz shed light on mechanisms of AC graphene response: screening currents induced in graphene by an external RF magnetic field tend to localize near structural defects.« less

Quantitative description on structure–property relationships of Li-ion battery materials for high-throughput computations

PubMed Central

Wang, Youwei; Zhang, Wenqing; Chen, Lidong; Shi, Siqi; Liu, Jianjun

2017-01-01

Abstract Li-ion batteries are a key technology for addressing the global challenge of clean renewable energy and environment pollution. Their contemporary applications, for portable electronic devices, electric vehicles, and large-scale power grids, stimulate the development of high-performance battery materials with high energy density, high power, good safety, and long lifetime. High-throughput calculations provide a practical strategy to discover new battery materials and optimize currently known material performances. Most cathode materials screened by the previous high-throughput calculations cannot meet the requirement of practical applications because only capacity, voltage and volume change of bulk were considered. It is important to include more structure–property relationships, such as point defects, surface and interface, doping and metal-mixture and nanosize effects, in high-throughput calculations. In this review, we established quantitative description of structure–property relationships in Li-ion battery materials by the intrinsic bulk parameters, which can be applied in future high-throughput calculations to screen Li-ion battery materials. Based on these parameterized structure–property relationships, a possible high-throughput computational screening flow path is proposed to obtain high-performance battery materials. PMID:28458737

Combinatorial and high-throughput screening of materials libraries: review of state of the art.

PubMed

Potyrailo, Radislav; Rajan, Krishna; Stoewe, Klaus; Takeuchi, Ichiro; Chisholm, Bret; Lam, Hubert

2011-11-14

Rational materials design based on prior knowledge is attractive because it promises to avoid time-consuming synthesis and testing of numerous materials candidates. However with the increase of complexity of materials, the scientific ability for the rational materials design becomes progressively limited. As a result of this complexity, combinatorial and high-throughput (CHT) experimentation in materials science has been recognized as a new scientific approach to generate new knowledge. This review demonstrates the broad applicability of CHT experimentation technologies in discovery and optimization of new materials. We discuss general principles of CHT materials screening, followed by the detailed discussion of high-throughput materials characterization approaches, advances in data analysis/mining, and new materials developments facilitated by CHT experimentation. We critically analyze results of materials development in the areas most impacted by the CHT approaches, such as catalysis, electronic and functional materials, polymer-based industrial coatings, sensing materials, and biomaterials.

Surface-screening mechanisms in ferroelectric thin films and their effect on polarization dynamics and domain structures

NASA Astrophysics Data System (ADS)

Kalinin, Sergei V.; Kim, Yunseok; Fong, Dillon D.; Morozovska, Anna N.

2018-03-01

For over 70 years, ferroelectric materials have been one of the central research topics for condensed matter physics and material science, an interest driven both by fundamental science and applications. However, ferroelectric surfaces, the key component of ferroelectric films and nanostructures, still present a significant theoretical and even conceptual challenge. Indeed, stability of ferroelectric phase per se necessitates screening of polarization charge. At surfaces, this can lead to coupling between ferroelectric and semiconducting properties of material, or with surface (electro) chemistry, going well beyond classical models applicable for ferroelectric interfaces. In this review, we summarize recent studies of surface-screening phenomena in ferroelectrics. We provide a brief overview of the historical understanding of the physics of ferroelectric surfaces, and existing theoretical models that both introduce screening mechanisms and explore the relationship between screening and relevant aspects of ferroelectric functionalities starting from phase stability itself. Given that the majority of ferroelectrics exist in multiple-domain states, we focus on local studies of screening phenomena using scanning probe microscopy techniques. We discuss recent studies of static and dynamic phenomena on ferroelectric surfaces, as well as phenomena observed under lateral transport, light, chemical, and pressure stimuli. We also note that the need for ionic screening renders polarization switching a coupled physical–electrochemical process and discuss the non-trivial phenomena such as chaotic behavior during domain switching that stem from this. ).

Discussion about the use of the volume specific surface area (VSSA) as a criterion to identify nanomaterials according to the EU definition. Part two: experimental approach.

PubMed

Lecloux, André J; Atluri, Rambabu; Kolen'ko, Yury V; Deepak, Francis Leonard

2017-10-12

The first part of this study was dedicated to the modelling of the influence of particle shape, porosity and particle size distribution on the volume specific surface area (VSSA) values in order to check the applicability of this concept to the identification of nanomaterials according to the European Commission Recommendation. In this second part, experimental VSSA values are obtained for various samples from nitrogen adsorption isotherms and these values were used as a screening tool to identify and classify nanomaterials. These identification results are compared to the identification based on the 50% of particles with a size below 100 nm criterion applied to the experimental particle size distributions obtained by analysis of electron microscopy images on the same materials. It is concluded that the experimental VSSA values are able to identify nanomaterials, without false negative identification, if they have a mono-modal particle size, if the adsorption data cover the relative pressure range from 0.001 to 0.65 and if a simple, qualitative image of the particles by transmission or scanning electron microscopy is available to define their shape. The experimental conditions to obtain reliable adsorption data as well as the way to analyze the adsorption isotherms are described and discussed in some detail in order to help the reader in using the experimental VSSA criterion. To obtain the experimental VSSA values, the BET surface area can be used for non-porous particles, but for porous, nanostructured or coated nanoparticles, only the external surface of the particles, obtained by a modified t-plot approach, should be considered to determine the experimental VSSA and to avoid false positive identification of nanomaterials, only the external surface area being related to the particle size. Finally, the availability of experimental VSSA values together with particle size distributions obtained by electron microscopy gave the opportunity to check the representativeness of the two models described in the first part of this study. They were also used to calculate the VSSA values and these calculated values were compared to the experimental results. For narrow particle size distributions, both models give similar VSSA values quite comparable to the experimental ones. But when the particle size distribution broadens or is of multi-bimodal shape, as theoretically predicted, one model leads to VSSA values higher than the experimental ones while the other most often leads to VSSA values lower than the experimental ones. The experimental VSSA approach then appears as a reliable, simple screening tool to identify nano and non-nano-materials. The modelling approach cannot be used as a formal identification tool but could be useful to screen for potential effects of shape, polydispersity and size, for example to compare various possible nanoforms.

Recent Advances in the Fabrication and Application of Screen-Printed Electrochemical (Bio)Sensors Based on Carbon Materials for Biomedical, Agri-Food and Environmental Analyses

PubMed Central

Hughes, Gareth; Westmacott, Kelly; Honeychurch, Kevin C.; Crew, Adrian; Pemberton, Roy M.; Hart, John P.

2016-01-01

This review describes recent advances in the fabrication of electrochemical (bio)sensors based on screen-printing technology involving carbon materials and their application in biomedical, agri-food and environmental analyses. It will focus on the various strategies employed in the fabrication of screen-printed (bio)sensors, together with their performance characteristics; the application of these devices for the measurement of selected naturally occurring biomolecules, environmental pollutants and toxins will be discussed. PMID:27690118

Screening materials for smoke evolution

NASA Technical Reports Server (NTRS)

Hilado, C. J.; Cumming, H. J.; Machado, A. M.

1978-01-01

The density of smoke produced by burning or smoldering materials is a factor that affects the ability of occupants to escape from a burning structure and the effectiveness of firefighters. Accordingly, considerable effort is being spent on developing materials that minimize the amount of smoke without impairing their performance characteristics. In the present paper, laboratory tests on such materials are described and evaluated. It is seen that the National Bureau of Standards smoke test and the Ohio State University release-rate test are the most promising for screening materials for smoke evolution. It is shown that, for plastics, smoke obscuration is a more realistic concern than smoke toxicity.

Community validation of the IDEA study cognitive screen in rural Tanzania.

PubMed

Gray, William K; Paddick, Stella Maria; Collingwood, Cecilia; Kisoli, Aloyce; Mbowe, Godfrey; Mkenda, Sarah; Lissu, Carolyn; Rogathi, Jane; Kissima, John; Walker, Richard W; Mushi, Declare; Chaote, Paul; Ogunniyi, Adesola; Dotchin, Catherine L

2016-11-01

The dementia diagnosis gap in sub-Saharan Africa (SSA) is large, partly because of difficulties in screening for cognitive impairment in the community. As part of the Identification and Intervention for Dementia in Elderly Africans (IDEA) study, we aimed to validate the IDEA cognitive screen in a community-based sample in rural Tanzania METHODS: Study participants were recruited from people who attended screening days held in villages within the rural Hai district of Tanzania. Criterion validity was assessed against the gold standard clinical dementia diagnosis using DSM-IV criteria. Construct validity was assessed against, age, education, sex and grip strength and instrumental activities of daily living (IADLs). Internal consistency and floor and ceiling effects were also examined. During community screening, the IDEA cognitive screen had high criterion validity, with an area under the receiver operating characteristic curve of 0.855 (95% CI 0.794 to 0.915). Higher scores on the screen were significantly correlated with lower age, male sex, having attended school, better grip strength and improved performance in activities of daily living. Factor analysis revealed a single factor with an eigenvalue greater than one, although internal consistency was only moderate (Cronbach's alpha = 0.534). The IDEA cognitive screen had high criterion and construct validity and is suitable for use as a cognitive screening instrument in a community setting in SSA. Only moderate internal consistency may partly reflect the multi-domain nature of dementia as diagnosed clinically. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Masking technique for coating thickness control on large and strongly curved aspherical optics.

PubMed

Sassolas, B; Flaminio, R; Franc, J; Michel, C; Montorio, J-L; Morgado, N; Pinard, L

2009-07-01

We discuss a method to control the coating thickness deposited onto large and strongly curved optics by ion beam sputtering. The technique uses an original design of the mask used to screen part of the sputtered materials. A first multielement mask is calculated from the measured two-dimensional coating thickness distribution. Then, by means of an iterative process, the final mask is designed. By using such a technique, it has been possible to deposit layers of tantalum pentoxide having a high thickness gradient onto a curved substrate 500 mm in diameter. Residual errors in the coating thickness profile are below 0.7%.

Combinatorial materials synthesis and high-throughput screening: an integrated materials chip approach to mapping phase diagrams and discovery and optimization of functional materials.

PubMed

Xiang, X D

Combinatorial materials synthesis methods and high-throughput evaluation techniques have been developed to accelerate the process of materials discovery and optimization and phase-diagram mapping. Analogous to integrated circuit chips, integrated materials chips containing thousands of discrete different compositions or continuous phase diagrams, often in the form of high-quality epitaxial thin films, can be fabricated and screened for interesting properties. Microspot x-ray method, various optical measurement techniques, and a novel evanescent microwave microscope have been used to characterize the structural, optical, magnetic, and electrical properties of samples on the materials chips. These techniques are routinely used to discover/optimize and map phase diagrams of ferroelectric, dielectric, optical, magnetic, and superconducting materials.

Construction of robust prognostic predictors by using projective adaptive resonance theory as a gene filtering method.

PubMed

Takahashi, Hiro; Kobayashi, Takeshi; Honda, Hiroyuki

2005-01-15

For establishing prognostic predictors of various diseases using DNA microarray analysis technology, it is desired to find selectively significant genes for constructing the prognostic model and it is also necessary to eliminate non-specific genes or genes with error before constructing the model. We applied projective adaptive resonance theory (PART) to gene screening for DNA microarray data. Genes selected by PART were subjected to our FNN-SWEEP modeling method for the construction of a cancer class prediction model. The model performance was evaluated through comparison with a conventional screening signal-to-noise (S2N) method or nearest shrunken centroids (NSC) method. The FNN-SWEEP predictor with PART screening could discriminate classes of acute leukemia in blinded data with 97.1% accuracy and classes of lung cancer with 90.0% accuracy, while the predictor with S2N was only 85.3 and 70.0% or the predictor with NSC was 88.2 and 90.0%, respectively. The results have proven that PART was superior for gene screening. The software is available upon request from the authors. honda@nubio.nagoya-u.ac.jp

Screening and transport in 2D semiconductor systems at low temperatures

PubMed Central

Das Sarma, S.; Hwang, E. H.

2015-01-01

Low temperature carrier transport properties in 2D semiconductor systems can be theoretically well-understood within RPA-Boltzmann theory as being limited by scattering from screened Coulomb disorder arising from random quenched charged impurities in the environment. In this work, we derive a number of analytical formula, supported by realistic numerical calculations, for the relevant density, mobility, and temperature range where 2D transport should manifest strong intrinsic (i.e., arising purely from electronic effects) metallic temperature dependence in different semiconductor materials arising entirely from the 2D screening properties, thus providing an explanation for why the strong temperature dependence of the 2D resistivity can only be observed in high-quality and low-disorder 2D samples and also why some high-quality 2D materials manifest much weaker metallicity than other materials. We also discuss effects of interaction and disorder on the 2D screening properties in this context as well as compare 2D and 3D screening functions to comment why such a strong intrinsic temperature dependence arising from screening cannot occur in 3D metallic carrier transport. Experimentally verifiable predictions are made about the quantitative magnitude of the maximum possible low-temperature metallicity in 2D systems and the scaling behavior of the temperature scale controlling the quantum to classical crossover. PMID:26572738

Screening methods for chemical warfare agents in environmental samples at the Edgewood area of Aberdeen Proving Ground, Maryland

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jakubowski, E.M.; Borland, M.M.; Norris, L.

1995-06-01

The U.S. Army Edgewood Research, Development and Engineering Center, the U.S. Army Aberdeen Proving Ground Support Activity, Directorate of Safety, Health and the Environment and SciTech Services Inc., an independent contractor, have developed an approach for screening environmental samples for the presence of chemical warfare agents. Since 1918, the Edgewood area of Aberdeen Proving Ground has been a research and testing ground for toxic agent compounds. Since these materials are considered highly toxic, screening for their presence in environmental samples is necessary for safe shipment to contract laboratories for testing by EPA guidelines. The screening ensures worker safety and maintainsmore » U.S. Army standards for transportation of materials potentially contaminated with chemical warfare agents. This paper describes the screening methodology.« less

14 CFR 23.1105 - Induction system screens.

Code of Federal Regulations, 2013 CFR

2013-01-01

... upstream of the carburetor or fuel injection system. (b) No screen may be in any part of the induction... alcohol alone; and (d) It must be impossible for fuel to strike any screen. [Doc. No. 4080, 29 FR 17955...

14 CFR 23.1105 - Induction system screens.

Code of Federal Regulations, 2012 CFR

2012-01-01

... upstream of the carburetor or fuel injection system. (b) No screen may be in any part of the induction... alcohol alone; and (d) It must be impossible for fuel to strike any screen. [Doc. No. 4080, 29 FR 17955...

14 CFR 23.1105 - Induction system screens.

Code of Federal Regulations, 2014 CFR

2014-01-01

... upstream of the carburetor or fuel injection system. (b) No screen may be in any part of the induction... alcohol alone; and (d) It must be impossible for fuel to strike any screen. [Doc. No. 4080, 29 FR 17955...

14 CFR 23.1105 - Induction system screens.

Code of Federal Regulations, 2010 CFR

2010-01-01

... upstream of the carburetor or fuel injection system. (b) No screen may be in any part of the induction... alcohol alone; and (d) It must be impossible for fuel to strike any screen. [Doc. No. 4080, 29 FR 17955...

14 CFR 23.1105 - Induction system screens.

Code of Federal Regulations, 2011 CFR

2011-01-01

... upstream of the carburetor or fuel injection system. (b) No screen may be in any part of the induction... alcohol alone; and (d) It must be impossible for fuel to strike any screen. [Doc. No. 4080, 29 FR 17955...

The use of portable equipment for the activity concentration index determination of building materials: method validation and survey of building materials on the Belgian market.

PubMed

Stals, M; Verhoeven, S; Bruggeman, M; Pellens, V; Schroeyers, W; Schreurs, S

2014-01-01

The Euratom BSS requires that in the near future (2015) the building materials for application in dwellings or buildings such as offices or workshops are screened for NORM nuclides. The screening tool is the activity concentration index (ACI). Therefore it is expected that a large number of building materials will be screened for NORM and thus require ACI determination. Nowadays, the proposed standard for determination of building material ACI is a laboratory analyses technique with high purity germanium spectrometry and 21 days equilibrium delay. In this paper, the B-NORM method for determination of building material ACI is assessed as a faster method that can be performed on-site, alternative to the aforementioned standard method. The B-NORM method utilizes a LaBr3(Ce) scintillation probe to obtain the spectral data. Commercially available software was applied to comprehensively take into account the factors determining the counting efficiency. The ACI was determined by interpreting the gamma spectrum from (226)Ra and its progeny; (232)Th progeny and (40)K. In order to assess the accuracy of the B-NORM method, a large selection of samples was analyzed by a certified laboratory and the results were compared with the B-NORM results. The results obtained with the B-NORM method were in good correlation with the results obtained by the certified laboratory, indicating that the B-NORM method is an appropriate screening method to assess building material ACI. The B-NORM method was applied to analyze more than 120 building materials on the Belgian market. No building materials that exceed the proposed reference level of 1 mSv/year were encountered. Copyright © 2013 Elsevier Ltd. All rights reserved.

High throughput screening (HTS) for phototoxicity hazard using the in vitro 3T3 neutral red uptake assay.

PubMed

Jones, P A; King, A V

2003-01-01

Testing for phototoxic hazard is usually carried out for product ingredients intended for use on skin, which may be exposed to sunlight. Unilever currently uses the validated in vitro 3T3 Neutral Red Uptake phototoxicity test (NRU PT). This protocol involves 2-3 experiments, each taking 3 days to perform. One person can test up to seven test materials plus positive control at any one time, requiring approximately 0.5 g test material. Higher throughput is required where libraries of potential actives are being generated and screening for potential phototoxicants is required. A proposed HTS protocol would use the NRU PT, but only one concentration (10 microg/ml) in a single experiment. The validity of the HTS protocol was investigated by a retrospective examination of data from 86 materials previously tested. Phototoxic hazard predictions made using the conventional NRU PT were compared with those obtained if only data at 10 microg/ml were considered. A majority of 73 materials (84.9%) gave agreement in predictions between the two protocols; for 13 materials (15.1%) the assessments did not agree. There were no false positives; however, there were some false negatives, i.e., predicted as phototoxic from the conventional assay, but non-phototoxic at 10 microg/ml. As this protocol is intended for screening purposes only it is considered that this would be acceptable at this stage in material selection. One person could screen 128 test materials in 3 days, requiring <1 mg test material, giving a substantial increase in productivity. Any material selected for further development and inclusion in a formulation may require further confirmatory testing, e.g. using a human skin model assay for phototoxicity.

Development and application of a general plasmid reference material for GMO screening.

PubMed

Wu, Yuhua; Li, Jun; Wang, Yulei; Li, Xiaofei; Li, Yunjing; Zhu, Li; Li, Jun; Wu, Gang

The use of analytical controls is essential when performing GMO detection through screening tests. Additionally, the presence of taxon-specific sequences is analyzed mostly for quality control during GMO detection. In this study, 11 commonly used genetic elements involving three promoters (P-35S, P-FMV35S and P-NOS), four marker genes (Bar, NPTII, HPT and Pmi), and four terminators (T-NOS, T-35S, T-g7 and T-e9), together with the reference gene fragments from six major crops of maize, soybean, rapeseed, rice, cotton and wheat, were co-integrated into the same single plasmid to construct a general reference plasmid pBI121-Screening. The suitability test of pBI121-Screening plasmid as reference material indicated that the non-target sequence on the pBI121-Screening plasmid did not affect the PCR amplification efficiencies of screening methods and taxon-specific methods. The sensitivity of screening and taxon-specific assays ranged from 5 to 10 copies of pBI121-Screening plasmid, meeting the sensitivity requirement of GMO detection. The construction of pBI121-Screening solves the lack of a general positive control for screening tests, thereby reducing the workload and cost of preparing a plurality of the positive control. Copyright © 2016 Elsevier B.V. All rights reserved.

Thermal Testing and Analysis of an Efficient High-Temperature Multi-Screen Internal Insulation

NASA Technical Reports Server (NTRS)

Weiland, Stefan; Handrick, Karin; Daryabeigi, Kamran

2007-01-01

Conventional multi-layer insulations exhibit excellent insulation performance but they are limited to the temperature range to which their components reflective foils and spacer materials are compatible. For high temperature applications, the internal multi-screen insulation IMI has been developed that utilizes unique ceramic material technology to produce reflective screens with high temperature stability. For analytical insulation sizing a parametric material model is developed that includes the main contributors for heat flow which are radiation and conduction. The adaptation of model-parameters based on effective steady-state thermal conductivity measurements performed at NASA Langley Research Center (LaRC) allows for extrapolation to arbitrary stack configurations and temperature ranges beyond the ones that were covered in the conductivity measurements. Experimental validation of the parametric material model was performed during the thermal qualification test of the X-38 Chin-panel, where test results and predictions showed a good agreement.

Expert-guided optimization for 3D printing of soft and liquid materials.

PubMed

Abdollahi, Sara; Davis, Alexander; Miller, John H; Feinberg, Adam W

2018-01-01

Additive manufacturing (AM) has rapidly emerged as a disruptive technology to build mechanical parts, enabling increased design complexity, low-cost customization and an ever-increasing range of materials. Yet these capabilities have also created an immense challenge in optimizing the large number of process parameters in order achieve a high-performance part. This is especially true for AM of soft, deformable materials and for liquid-like resins that require experimental printing methods. Here, we developed an expert-guided optimization (EGO) strategy to provide structure in exploring and improving the 3D printing of liquid polydimethylsiloxane (PDMS) elastomer resin. EGO uses three steps, starting first with expert screening to select the parameter space, factors, and factor levels. Second is a hill-climbing algorithm to search the parameter space defined by the expert for the best set of parameters. Third is expert decision making to try new factors or a new parameter space to improve on the best current solution. We applied the algorithm to two calibration objects, a hollow cylinder and a five-sided hollow cube that were evaluated based on a multi-factor scoring system. The optimum print settings were then used to print complex PDMS and epoxy 3D objects, including a twisted vase, water drop, toe, and ear, at a level of detail and fidelity previously not obtained.

Expert-guided optimization for 3D printing of soft and liquid materials

PubMed Central

Abdollahi, Sara; Davis, Alexander; Miller, John H.

2018-01-01

Additive manufacturing (AM) has rapidly emerged as a disruptive technology to build mechanical parts, enabling increased design complexity, low-cost customization and an ever-increasing range of materials. Yet these capabilities have also created an immense challenge in optimizing the large number of process parameters in order achieve a high-performance part. This is especially true for AM of soft, deformable materials and for liquid-like resins that require experimental printing methods. Here, we developed an expert-guided optimization (EGO) strategy to provide structure in exploring and improving the 3D printing of liquid polydimethylsiloxane (PDMS) elastomer resin. EGO uses three steps, starting first with expert screening to select the parameter space, factors, and factor levels. Second is a hill-climbing algorithm to search the parameter space defined by the expert for the best set of parameters. Third is expert decision making to try new factors or a new parameter space to improve on the best current solution. We applied the algorithm to two calibration objects, a hollow cylinder and a five-sided hollow cube that were evaluated based on a multi-factor scoring system. The optimum print settings were then used to print complex PDMS and epoxy 3D objects, including a twisted vase, water drop, toe, and ear, at a level of detail and fidelity previously not obtained. PMID:29621286

Principles of phosphorescent organic light emitting devices.

PubMed

Minaev, Boris; Baryshnikov, Gleb; Agren, Hans

2014-02-07

Organic light-emitting device (OLED) technology has found numerous applications in the development of solid state lighting, flat panel displays and flexible screens. These applications are already commercialized in mobile phones and TV sets. White OLEDs are of especial importance for lighting; they now use multilayer combinations of organic and elementoorganic dyes which emit various colors in the red, green and blue parts of the visible spectrum. At the same time the stability of phosphorescent blue emitters is still a major challenge for OLED applications. In this review we highlight the basic principles and the main mechanisms behind phosphorescent light emission of various classes of photofunctional OLED materials, like organic polymers and oligomers, electron and hole transport molecules, elementoorganic complexes with heavy metal central ions, and clarify connections between the main features of electronic structure and the photo-physical properties of the phosphorescent OLED materials.

Radiative-conductive inverse problem for lumped parameter systems

NASA Astrophysics Data System (ADS)

Alifanov, O. M.; Nenarokomov, A. V.; Gonzalez, V. M.

2008-11-01

The purpose of this paper is to introduce a iterative regularization method in the research of radiative and thermal properties of materials with applications in the design of Thermal Control Systems (TCS) of spacecrafts. In this paper the radiative and thermal properties (emissivity and thermal conductance) of a multilayered thermal-insulating blanket (MLI), which is a screen-vacuum thermal insulation as a part of the (TCS) for perspective spacecrafts, are estimated. Properties of the materials under study are determined in the result of temperature and heat flux measurement data processing based on the solution of the Inverse Heat Transfer Problem (IHTP) technique. Given are physical and mathematical models of heat transfer processes in a specimen of the multilayered thermal-insulating blanket located in the experimental facility. A mathematical formulation of the inverse heat conduction problem is presented too. The practical testing were performed for specimen of the real MLI.

Study of multilayer thermal insulation by inverse problems method

NASA Astrophysics Data System (ADS)

Alifanov, O. M.; Nenarokomov, A. V.; Gonzalez, V. M.

2009-11-01

The purpose of this paper is to introduce a new method in the research of radiative and thermal properties of materials with further applications in the design of thermal control systems (TCS) of spacecrafts. In this paper the radiative and thermal properties (emissivity and thermal conductance) of a multilayered thermal-insulating blanket (MLI), which is a screen-vacuum thermal insulation as a part of the TCS for perspective spacecrafts, are estimated. Properties of the materials under study are determined in the result of temperature and heat flux measurement data processing based on the solution of the inverse heat transfer problem (IHTP) technique. Given are physical and mathematical models of heat transfer processes in a specimen of the multilayered thermal-insulating blanket located in the experimental facility. A mathematical formulation of the inverse heat conduction problem is presented as well. The practical approves were made for specimen of the real MLI.

Design of a New Fused-Ring Electron Acceptor with Excellent Compatibility to Wide-Bandgap Polymer Donors for High-Performance Organic Photovoltaics.

PubMed

Liu, Wenrui; Zhang, Jianyun; Zhou, Zichun; Zhang, Dongyang; Zhang, Yuan; Xu, Shengjie; Zhu, Xiaozhang

2018-05-16

Fused-ring electron acceptors (FREAs) have recently received intensive attention. Besides the continuing development of new FREAs, the demand for FREAs featuring good compatibility to donor materials is becoming more and more urgent, which is highly desirable for screening donor materials and achieving new breakthroughs. In this work, a new FREA is developed, ZITI, featuring an octacyclic dithienocyclopentaindenoindene central core. The core is designed by linking 2,7-dithienyl substituents and indenoindene with small methylene groups, in which the indeno[1,2-b]thiophene-2-(3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile part provides a large and unoccupied π-surface. Most notably, ZITI possesses an excellent compatibility with commercially available polymer donors, delivering very high power conversion efficiencies of over 13%. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Gamma-ray spectrometry of ultra low levels of radioactivity within the material screening program for the GERDA experiment.

PubMed

Budjás, D; Gangapshev, A M; Gasparro, J; Hampel, W; Heisel, M; Heusser, G; Hult, M; Klimenko, A A; Kuzminov, V V; Laubenstein, M; Maneschg, W; Simgen, H; Smolnikov, A A; Tomei, C; Vasiliev, S I

2009-05-01

In present and future experiments in the field of rare events physics a background index of 10(-3) counts/(keV kg a) or better in the region of interest is envisaged. A thorough material screening is mandatory in order to achieve this goal. The results of a systematic study of radioactive trace impurities in selected materials using ultra low-level gamma-ray spectrometry in the framework of the GERDA experiment are reported.

The University of Kansas High-Throughput Screening Laboratory. Part II: enabling collaborative drug-discovery partnerships through cutting-edge screening technology.

PubMed

McDonald, Peter R; Roy, Anuradha; Chaguturu, Rathnam

2011-07-01

The University of Kansas High-Throughput Screening (KU HTS) core is a state-of-the-art drug-discovery facility with an entrepreneurial open-service policy, which provides centralized resources supporting public- and private-sector research initiatives. The KU HTS core was established in 2002 at the University of Kansas with support from an NIH grant and the state of Kansas. It collaborates with investigators from national and international academic, nonprofit and pharmaceutical organizations in executing HTS-ready assay development and screening of chemical libraries for target validation, probe selection, hit identification and lead optimization. This is part two of a contribution from the KU HTS laboratory.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Twieg, R.J.

Materials were chosen by screening the Cambridge Crystallographic Index for new noncentrosymmetric crystalline compounds, by screening commercially available materials or by synthesis of unique new substances. Measurements were then made on the powder form of these materials. Langmuir-Blodgett films were deposited and studied. In addition to the above studies, a computer program was developed to calculate (hyper) polarizabilities of organic molecules and thus aid in the selection of materials for testing. The nonlinear molecules have been divided into three classes according to absorption cutoff: 400 to 500 nm, 300 to 400 nm, and 200 to 300 nm. 108 refs., 7more » tabs. (WRF)« less

An optimal user-interface for EPIMS database conversions and SSQ 25002 EEE parts screening

NASA Technical Reports Server (NTRS)

Watson, John C.

1996-01-01

The Electrical, Electronic, and Electromechanical (EEE) Parts Information Management System (EPIMS) database was selected by the International Space Station Parts Control Board for providing parts information to NASA managers and contractors. Parts data is transferred to the EPIMS database by converting parts list data to the EP1MS Data Exchange File Format. In general, parts list information received from contractors and suppliers does not convert directly into the EPIMS Data Exchange File Format. Often parts lists use different variable and record field assignments. Many of the EPES variables are not defined in the parts lists received. The objective of this work was to develop an automated system for translating parts lists into the EPIMS Data Exchange File Format for upload into the EPIMS database. Once EEE parts information has been transferred to the EPIMS database it is necessary to screen parts data in accordance with the provisions of the SSQ 25002 Supplemental List of Qualified Electrical, Electronic, and Electromechanical Parts, Manufacturers, and Laboratories (QEPM&L). The SSQ 2S002 standards are used to identify parts which satisfy the requirements for spacecraft applications. An additional objective for this work was to develop an automated system which would screen EEE parts information against the SSQ 2S002 to inform managers of the qualification status of parts used in spacecraft applications. The EPIMS Database Conversion and SSQ 25002 User Interfaces are designed to interface through the World-Wide-Web(WWW)/Internet to provide accessibility by NASA managers and contractors.

Laypersons' views of material incentives for enhancing colorectal cancer screening.

PubMed

Hagoel, Lea; Rennert, Gad; Feder-Bubis, Paula

2015-10-01

Colorectal cancer (CRC) early detection improves health outcomes; screening programmes invest efforts in initiating invitations to target populations to be tested. Enhanced adherence is essential for reduction of morbidity and mortality. Participation rates in Israel are still relatively low. To explore lay views regarding the concept of receiving material incentives in exchange for enhanced adherence to CRC screening. Qualitative study. Between November 2009 and February 2010 six focus group discussions were carried out in two urban, middle and low socio-economic status primary care clinics in a Northern city in Israel. Participants were eligible individuals for CRC screening, aged 50-68 (N = 24). Data analysis followed the principles of grounded theory, supported by qualitative software. Participants found administering incentives in exchange for CRC screening inappropriate on rational and moral grounds. They valued their relations with the medical team and the health system more than the potential gain expected. Individuals eligible for CRC screening perceived themselves as responsible for their health, admitting difficulties in realizing this responsibility. Incentives were reported unsuitable for solving reported screening difficulties and a potential harm to the doctor-patient relationship. Focus group participants expressed an unconventional voice towards the use of material incentives. They pointed to the need for focused support of health behaviour change and valued their autonomy. While a proportion of the invitees in the target population see the importance of screening and appreciate the HMO's initiative to invite them for testing, they also expressed their need for support from the HMO in realizing the recommended health behaviour. © 2013 John Wiley & Sons Ltd.

Bubbles Responding to Ultrasound Pressure

NASA Technical Reports Server (NTRS)

2003-01-01

The Bubble and Drop Nonlinear Dynamics (BDND) experiment was designed to improve understanding of how the shape and behavior of bubbles respond to ultrasound pressure. By understanding this behavior, it may be possible to counteract complications bubbles cause during materials processing on the ground. This 12-second sequence came from video downlinked from STS-94, July 5 1997, MET:3/19:15 (approximate). The BDND guest investigator was Gary Leal of the University of California, Santa Barbara. The experiment was part of the space research investigations conducted during the Microgravity Science Laboratory-1R mission (STS-94, July 1-17 1997). Advanced fluid dynamics experiments will be a part of investigations plarned for the International Space Station. (435KB, 13-second MPEG, screen 160 x 120 pixels; downlinked video, higher quality not available) A still JPG composite of this movie is available at http://mix.msfc.nasa.gov/ABSTRACTS/MSFC-0300162.html.

Photovoltaic performance and the energy landscape of CH3NH3PbI3.

PubMed

Zhou, Yecheng; Huang, Fuzhi; Cheng, Yi-Bing; Gray-Weale, Angus

2015-09-21

Photovoltaic cells with absorbing layers of certain perovskites have power conversion efficiencies up to 20%. Among these materials, CH3NH3PbI3 is widely used. Here we use density-functional theory to calculate the energies and rotational energy barriers of a methylammonium ion in the α or β phase of CH3NH3PbI3 with differently oriented neighbouring methylammonium ions. Our results suggest the methylammonium ions in CH3NH3PbI3 prefer to rotate collectively, and to be parallel to their neighbours. Changes in polarization on rotation of methylammonium ions are two to three times larger than those on relaxation of the lead ion from the centre of its coordination shell. The preferences for parallel configuration and concerted rotation, with the polarisation changes, are consistent with ferroelectricity in the material, and indicate that this polarisation is governed by methylammonium orientational correlations. We show that the field due to this polarisation is strong enough to screen the field hindering charge transport, and find this screening field in agreement with experiment. We examine two possible mechanisms for the effect of methylammonium ion rotation on photovoltaic performance. One is that rearrangement of methylammoniums promotes the creation and transport of charge carriers. Some effective masses change greatly, but changes in band structure with methylammonium rotation are not large enough to explain current-voltage hysteresis behaviour. The second possible mechanism is that polarization screens the hindering electric field, which arises from charge accumulation in the transport layers. Polarization changes on methylammonium rotation favour this second mechanism, suggesting that collective reorientation of methylammonium ions in the bulk crystal are in significant part responsible for the hysteresis and power conversion characteristics of CH3NH3PbI3 photovoltaic cells.

Screening combinatorial arrays of inorganic materials with spectroscopy or microscopy

DOEpatents

Schultz, Peter G.; Xiang, Xiaodong; Goldwasser, Isy

2004-02-03

Methods and apparatus for the preparation and use of a substrate having an array of diverse materials in predefined regions thereon. A substrate having an array of diverse materials thereon is generally prepared by delivering components of materials to predefined regions on a substrate, and simultaneously reacting the components to form at least two materials. Materials which can be prepared using the methods and apparatus of the present invention include, for example, covalent network solids, ionic solids and molecular solids. More particularly, materials which can be prepared using the methods and apparatus of the present invention include, for example, inorganic materials, intermetallic materials, metal alloys, ceramic materials, organic materials, organometallic materials, non-biological organic polymers, composite materials (e.g., inorganic composites, organic composites, or combinations thereof), etc. Once prepared, these materials can be screened for useful properties including, for example, electrical, thermal, mechanical, morphological, optical, magnetic, chemical, or other properties. Thus, the present invention provides methods for the parallel synthesis and analysis of novel materials having useful properties.

Preparation and screening of crystalline inorganic materials

DOEpatents

Schultz, Peter G [La Jolla, CA; Xiang, Xiaodong [Danville, CA; Goldwasser, Isy [Palo Alto, CA; Brice{hacek over }o, Gabriel; Sun, Xiao-Dong [Fremont, CA; Wang, Kai-An [Cupertino, CA

2008-10-28

Methods and apparatus for the preparation and use of a substrate having an array of diverse materials in predefined regions thereon. A substrate having an array of diverse materials thereon is generally prepared by delivering components of materials to predefined regions on a substrate, and simultaneously reacting the components to form at least two materials. Materials which can be prepared using the methods and apparatus of the present invention include, for example, covalent network solids, ionic solids and molecular solids. More particularly, materials which can be prepared using the methods and apparatus of the present invention include, for example, inorganic materials, intermetallic materials, metal alloys, ceramic materials, organic materials, organometallic materials, non-biological organic polymers, composite materials (e.g., inorganic composites, organic composites, or combinations thereof), etc. Once prepared, these materials can be screened for useful properties including, for example, electrical, thermal, mechanical, morphological, optical, magnetic, chemical, or other properties. Thus, the present invention provides methods for the parallel synthesis and analysis of novel materials having useful properties.

Combinatorial screening of inorganic and organometallic materials

DOEpatents

Schultz, Peter G.; Xiang, Xiaodong; Goldwasser, Isy

2002-01-01

Methods and apparatus for the preparation and use of a substrate having an array of diverse materials in predefined regions thereon. A substrate having an array of diverse materials thereon is generally prepared by delivering components of materials to predefined regions on a substrate, and simultaneously reacting the components to form at least two materials. Materials which can be prepared using the methods and apparatus of the present invention include, for example, covalent network solids, ionic solids and molecular solids. More particularly, materials which can be prepared using the methods and apparatus of the present invention include, for example, inorganic materials, intermetallic materials, metal alloys, ceramic materials, organic materials, organometallic materials, non-biological organic polymers, composite materials (e.g., inorganic composites, organic composites, or combinations thereof), etc. Once prepared, these materials can be screened for useful properties including, for example, electrical, thermal, mechanical, morphological, optical, magnetic, chemical, or other properties. Thus, the present invention provides methods for the parallel synthesis and analysis of novel materials having useful properties.

Preparation and screening of crystalline zeolite and hydrothermally-synthesized materials

DOEpatents

Schultz, Peter G.; Xiang, Xiaodong; Goldwasser, Isy; Briceno, Gabriel; Sun, Xiao-Dong; Wang, Kai-An

2005-03-08

Methods and apparatus for the preparation and use of a substrate having an array of diverse materials in predefined regions thereon. A substrate having an array of diverse materials thereon is generally prepared by delivering components of materials to predefined regions on a substrate, and simultaneously reacting the components to form at least two materials. Materials which can be prepared using the methods and apparatus of the present invention include, for example, covalent network solids, ionic solids and molecular solids. More particularly, materials which can be prepared using the methods and apparatus of the present invention include, for example, inorganic materials, intermetallic materials, metal alloys, ceramic materials, organic materials, organometallic materials, non-biological organic polymers, composite materials (e.g., inorganic composites, organic composites, or combinations thereof), etc. Once prepared, these materials can be screened for useful properties including, for example, electrical, thermal, mechanical, morphological, optical, magnetic, chemical, or other properties. Thus, the present invention provides methods for the parallel synthesis and analysis of novel materials having useful properties.

A Comparison of the effectiveness of Mammographic Film-Screen and Standard Film-Screen in the Detection of Small Bone Fractures

PubMed Central

Sani, Karim Ghazikhanlou; Jafari, Mahmoodreza; Rostampoor, Nima

2011-01-01

The use of mammography film-screen is limited in general radiography. The purpose of this study was to compare the effectiveness of mammographic film-screen and standard film-screen systems in the detection of small bone fractures. Radiographs were taken from patients' extremities and neck areas using mammography film-screen and standard film-screen (n=57 each). Fourteen other radiographs were taken from other views (predominantly oblique views), making a total number of 128 radiographs. Paired radiographs, taken from the same areas, were compared by two radiologists in terms of image visual sharpness, presence of bony fractures, and soft tissue injuries. The surface dose received by patients in the two systems was also compared. The radiographs taken by mammography film-screen had a statistically better visual sharpness compared to those taken by the standard film-screen system. However, there was no statistically significant difference between the diagnostic accuracy of the two systems. Mammography film-screen was able to detect only one out of 57 lesions, whereas standard film-screen system did not detec any lesion. The surface dose received by patients in mammography film-screen was higher than that in standard film-screen system. The findings of the present study suggest that mammography film-screen may be recommended as a diagnostic tool for the detection of small fractures of tinny parts of body such as fingers, hand or foot. They also suggest that mammography film-screen has no advantage over standard film-screen for radiography of thick body parts such as neck and knee. PMID:23115417

Mammography Patient Information at Hospital Websites: Most Neither Comprehensible Nor Guideline Supported.

PubMed

Sadigh, Gelareh; Singh, Kush; Gilbert, Kirven; Khan, Ramsha; Duszak, Abigail M; Duszak, Richard

2016-11-01

Ongoing controversy regarding screening mammography guidelines has created confusion for many patients. Given recommendations that patient educational material be prepared at or below the 7th grade reading level of average Americans, the purpose of this study was to assess the readability of online mammography information offered by hospitals nationwide. During 2015, online mammography patient educational materials were identified for all Medicare-recognized hospitals nationwide for which screening mammography metrics were publicly available. Patient educational materials were assessed using six validated readability score algorithms. All references to official screening guidelines were captured. Of 4105 hospitals nationwide, 3252 had websites and confirmable screening mammography services. Of those, 1753 (54%) offered mammography information material online. Only 919 (28%) referenced any professional society guidelines. After excluding information not formatted in HTML and shorter than 100 words (to improve algorithm reliability), 1524 hospital mammography webpages were assessed for grade level scores. Nationally, the mean of each readability score for all hospitals varied between the 10th and 14th grade levels, all higher than the recommended 7th grade level (p < 0.001). At the individual hospital level, only 14 hospitals (0.4%) had mean scores at or below the 7th grade level. Of U.S. hospitals that offer screening mammography and have websites, only 54% provide online mammography educational material. Of those, only 0.4% present information at a reading level comprehensible to average Americans, and only 28% offer specific information to help patients reconcile conflicting guidelines. Health systems offering mammography should strive to better meet women's health information and literacy needs.

EPA's proposed land ban regulations. Hearing before the Subcommittee on Commerce, Transportation, and Tourism of the Committee on Energy and Commerce, House of Representatives, Ninety-Ninth Congress, Second Session, February 19, 1986

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1986-01-01

Three representatives of the Environmental Protection Agency (EPA) testified in response to questions over the agency's apparent approval of the land disposal of toxic materials in contradiction to the ban implicit in the Hazardous and Solid Waste Amendments of 1984. In new regulations, EPA interprets the ban as applying only when migration of toxic materials exceeds its screening levels. EPA also cites its screening levels to place a cap on waste treatment. At issue was EPA's effort to avoid the mandate of the 1984 legislation and its acceptance of screening levels which may assume a lower threat than actually exists.more » EPA representatives explained the rulemaking, and defended the use of screening levels as a basis for treatment and exemption. Additional material submitted for the record by the agency and by the House committee follows the testimony.« less

A Guide to Screening for the Early and Periodic Screening, Diagnosis and Treatment Program (EPSDT) Under Medicaid.

ERIC Educational Resources Information Center

Frankenburg, William K.; North, A. Frederick, Jr.

The manual was designed to help public officials, physicians, nurses, and others to plan and implement an Early and Periodic Screening, Diagnosis and Treatment (EPSDT) program under Medicaid. Procedures for carrying out components of an EPSDT program are recommended. Part 1 discusses organization and administration of screening, diagnosis, and…

REVIEW ARTICLE: On correlation effects in electron spectroscopies and the GW approximation

NASA Astrophysics Data System (ADS)

Hedin, Lars

1999-10-01

The GW approximation (GWA) extends the well-known Hartree-Fock approximation (HFA) for the self-energy (exchange potential), by replacing the bare Coulomb potential v by the dynamically screened potential W, e.g. Vex = iGv is replaced by icons/Journals/Common/Sigma" ALT="Sigma" ALIGN="TOP"/>GW = iGW. Here G is the one-electron Green's function. The GWA like the HFA is self-consistent, which allows for solutions beyond perturbation theory, like say spin-density waves. In a first approximation, iGW is a sum of a statically screened exchange potential plus a Coulomb hole (equal to the electrostatic energy associated with the charge pushed away around a given electron). The Coulomb hole part is larger in magnitude, but the two parts give comparable contributions to the dispersion of the quasi-particle energy. The GWA can be said to describe an electronic polaron (an electron surrounded by an electronic polarization cloud), which has great similarities to the ordinary polaron (an electron surrounded by a cloud of phonons). The dynamical screening adds new crucial features beyond the HFA. With the GWA not only bandstructures but also spectral functions can be calculated, as well as charge densities, momentum distributions, and total energies. We will discuss the ideas behind the GWA, and generalizations which are necessary to improve on the rather poor GWA satellite structures in the spectral functions. We will further extend the GWA approach to fully describe spectroscopies like photoemission, x-ray absorption, and electron scattering. Finally we will comment on the relation between the GWA and theories for strongly correlated electronic systems. In collecting the material for this review, a number of new results and perspectives became apparent, which have not been published elsewhere.

Thermal Protection System Aerothermal Screening Tests in HYMETS Facility

NASA Technical Reports Server (NTRS)

Szalai, Christine E.; Beck, Robin A. S.; Gasch, Matthew J.; Alumni, Antonella I.; Chavez-Garcia, Jose F.; Splinter, Scott C.; Gragg, Jeffrey G.; Brewer, Amy

2011-01-01

The Entry, Descent, and Landing (EDL) Technology Development Project has been tasked to develop Thermal Protection System (TPS) materials for insertion into future Mars Entry Systems. A screening arc jet test of seven rigid ablative TPS material candidates was performed in the Hypersonic Materials Environmental Test System (HYMETS) facility at NASA Langley Research Center, in both an air and carbon dioxide test environment. Recession, mass loss, surface temperature, and backface thermal response were measured for each test specimen. All material candidates survived the Mars aerocapture relevant heating condition, and some materials showed a clear increase in recession rate in the carbon dioxide test environment. These test results supported subsequent down-selection of the most promising material candidates for further development.

A new accurate and flexible index to assess the contribution of building materials to indoor gamma exposure.

PubMed

Nuccetelli, Cristina; Leonardi, Federica; Trevisi, Rosabianca

2015-05-01

The role of building materials as a source of gamma radiation has been recognized in the new EU Basic Safety Standards Directive which introduces an index I to screen building materials of radiological concern. This index was developed to account for average concrete values of thickness and density, the main structural characteristics of building materials that have an effect on gamma irradiation. Consequently, this screening procedure could be unfit in case of significantly different density and/or thickness of the building materials under examination. The paper proposes a more accurate and flexible activity concentration index, accounting for the actual density and thickness of building materials. Copyright © 2015 Elsevier Ltd. All rights reserved.

Effect of Screen Reading and Reading from Printed Out Material on Student Success and Permanency in Introduction to Computer Lesson

ERIC Educational Resources Information Center

Tuncer, Murat; Bahadir, Ferdi

2014-01-01

In this study, the effect of screen reading and reading from printed out material on student success and permanency in Introduction to Computer Lesson is investigated. Study group of the research consists of 78 freshman students registered in Erzincan University Refahiye Vocational School Post Service department. Study groups of research consist…

Does Patient Time Spent Viewing Computer-Tailored Colorectal Cancer Screening Materials Predict Patient-Reported Discussion of Screening with Providers?

ERIC Educational Resources Information Center

Sanders, Mechelle; Fiscella, Kevin; Veazie, Peter; Dolan, James G.; Jerant, Anthony

2016-01-01

The main aim is to examine whether patients' viewing time on information about colorectal cancer (CRC) screening before a primary care physician (PCP) visit is associated with discussion of screening options during the visit. We analyzed data from a multi-center randomized controlled trial of a tailored interactive multimedia computer program…

The Benefits of More Electronic Screen Space on Students' Retention of Material in Classroom Lectures

ERIC Educational Resources Information Center

Lanir, Joel; Booth, Kellogg S.; Hawkey, Kirstie

2010-01-01

Many lecture halls today have two or more screens to be used by instructors for lectures with computer-supported visual aids. Typically, this additional screen real estate is not used to display additional information; rather a single stream of information is projected on all screens. We describe a controlled laboratory study that empirically…

Developing and testing lay literature about breast cancer screening for African American women.

PubMed

Coleman, Elizabeth Ann; Coon, Sharon; Mohrmann, Carolyn; Hardin, Susan; Stewart, Beth; Gibson, Regina Shoate; Cantrell, Mary; Lord, Janet; Heard, Jeanne

2003-01-01

Written materials about breast cancer screening for African American women with low literacy skills are needed. Available materials were not at or below third-grade reading levels, were not culturally sensitive, and were not accurate in illustrating correct breast self-examination (BSE) techniques. Focus groups representing the target population helped the authors design a pamphlet describing how to perform BSE and a motivational picture book to help women overcome barriers to screening. The authors chose a food theme for the cover of the pamphlet written at a third-grade level and suggested a photographic version. In the motivational book, two women address barriers to screening and replace myths and fears with facts and actions. Data from 162 women showed that they learned from both the photographic and illustrated versions. Women in the photographic group found significantly more lumps in the silicone models, so the authors chose that version to use in final testing. Finally, nurses pretested a group of patients before they reviewed the materials and post-tested another group after they reviewed them. The group who had reviewed the materials had greater knowledge of and intent to follow the guidelines and received higher scores on BSE techniques.

Combinatorial synthesis and screening of non-biological polymers

DOEpatents

Schultz, Peter G.; Xiang, Xiao-Dong; Goldwasser, Isy; Briceno, Gabriel; Sun, Xiao-Dong; Wang, Kai-An

2006-04-25

Methods and apparatus for the preparation and use of a substrate having an array of diverse materials in predefined regions thereon. A substrate having an array of diverse materials thereon is generally prepared by delivering components of materials to predefined regions on a substrate, and simultaneously reacting the components to form at least two materials. Materials which can be prepared using the methods and apparatus of the present invention include, for example, covalent network solids, ionic solids and molecular solids. More particularly, materials which can be prepared using the methods and apparatus of the present invention include, for example, inorganic materials, intermetallic materials, metal alloys, ceramic materials, organic materials, organometallic materials, non-biological organic polymers, composite materials (e.g., inorganic composites, organic composites, or combinations thereof), etc. Once prepared, these materials can be screened for useful properties including, for example, electrical, thermal, mechanical, morphological, optical, magnetic, chemical, or other properties. Thus, the present invention provides methods for the parallel synthesis and analysis of novel materials having useful properties.

Synthesis and screening combinatorial arrays of zeolites

DOEpatents

Schultz, Peter G.; Xiang, Xiaodong; Goldwasser, Isy

2003-11-18

Methods and apparatus for the preparation and use of a substrate having an array of diverse materials in predefined regions thereon. A substrate having an array of diverse materials thereon is generally prepared by delivering components of materials to predefined regions on a substrate, and simultaneously reacting the components to form at least two materials. Materials which can be prepared using the methods and apparatus of the present invention include, for example, covalent network solids, ionic solids and molecular solids. More particularly, materials which can be prepared using the methods and apparatus of the present invention include, for example, inorganic materials, intermetallic materials, metal alloys, ceramic materials, organic materials, organometallic materials, non-biological organic polymers, composite materials (e.g., inorganic composites, organic composites, or combinations thereof), etc. Once prepared, these materials can be screened for useful properties including, for example, electrical, thermal, mechanical, morphological, optical, magnetic, chemical, or other properties. Thus, the present invention provides methods for the parallel synthesis and analysis of novel materials having useful properties.

Surface-screening mechanisms in ferroelectric thin films and their effect on polarization dynamics and domain structures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kalinin, Sergei V.; Kim, Yunseok; Fong, Dillon D.

For over 70 years, ferroelectric materials have been one of the central research topics for condensed matter physics and material science, an interest driven both by fundamental science and applications. However, ferroelectric surfaces, the key component of ferroelectric films and nanostructures, still present a significant theoretical and even conceptual challenge. Indeed, stability of ferroelectric phase per se necessitates screening of polarization charge. At surfaces, this can lead to coupling between ferroelectric and semiconducting properties of material, or with surface (electro) chemistry, going well beyond classical models applicable for ferroelectric interfaces. In this review, we summarize recent studies of surface-screening phenomenamore » in ferroelectrics. We provide a brief overview of the historical understanding of the physics of ferroelectric surfaces, and existing theoretical models that both introduce screening mechanisms and explore the relationship between screening and relevant aspects of ferroelectric functionalities starting from phase stability itself. Given that the majority of ferroelectrics exist in multiple-domain states, we focus on local studies of screening phenomena using scanning probe microscopy techniques. We discuss recent studies of static and dynamic phenomena on ferroelectric surfaces, as well as phenomena observed under lateral transport, light, chemical, and pressure stimuli. We also note that the need for ionic screening renders polarization switching a coupled physical-electrochemical process and discuss the non-trivial phenomena such as chaotic behavior during domain switching that stem from this.« less

Analysis of International Commodity Shipping Data and the Shipment of NORM to the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baciak, James E.; Ely, James H.; Schweppe, John E.

As part of the Spreader Bar Radiation Detector project, PNNL analyzed US import data shipped through US ports collected over the 12 months of 2006 (over 4.5 million containers). Using these data, we extracted a variety of distributions that are of interest to modelers and developers of active and passive detection systems used to 'scan' IMCCs for potential contraband. This report expands on some of the analysis presented in an earlier report from LLNL, by investigation the foreign port distribution of commodities shipped to the US. The majority of containers shipped to the United States are 40 ft containers ({approx}70%);more » about 25% are 20 ft; and about 3.6% are 45 ft containers. A small fraction (<1%) of containers are of other more specialized sizes, and very few ports actually ship these unique size containers (a full distribution for all foreign ports is shown in Appendix A below). The primary foreign ports that ship the largest fraction of each container are shown in the table below. Given that 45 ft containers comprise 1 of out every 27 containers shipped to the US, and given the foreign ports from which they are shipped, they should not be ignored in screening; further testing and analysis of radiation measurements for national security with this size container is warranted. While a large amount of NORM is shipped in IMCCs, only a few specific commodities are shipped with enough frequency to present potential issues in screening IMCCs at ports. The majority of containers with NORM will contain fertilizers (5,700 containers), granite (59,000 containers), or ceramic (225,000 containers) materials. Fertilizers were generally shipping in either 20- or 40 ft containers with equal frequency. While granite is mostly shipped in 20 ft containers, ceramic materials can be shipped in either 20- or 40 ft containers. The size of container depended on the specific use of the ceramic or porcelain material. General construction ceramics (such as floor and roofing tiles) tend to be shipped in 20 ft containers. Consumer products made from ceramic materials (e.g., tableware, sinks, and toilets) are generally shipped in 40 ft containers. This distinct discrepancy is due in large part to the packaging of the commodity. Consumer products are generally shipped packed in a box loaded with Styrofoam or other packing material to protect the product from breakage. Construction ceramic materials are generally shipped in less packing material, many times consisting of only a cardboard or wooden box. Granite is almost always shipped in a 20 ft container, given its very high density.« less

Material characterisation and preliminary mechanical design for the HL-LHC shielded beam screens operating at cryogenic temperatures.

NASA Astrophysics Data System (ADS)

Garion, C.; Dufay-Chanat, L.; Koettig, T.; Machiocha, W.; Morrone, M.

2015-12-01

The High Luminosity LHC project (HL-LHC) aims at increasing the luminosity (rate of collisions) in the Large Hadron Collider (LHC) experiments by a factor of 10 beyond the original design value (from 300 to 3000 fb-1). It relies on new superconducting magnets, installed close to the interaction points, equipped with new beam screen. This component has to ensure the vacuum performance together with shielding the cold mass from physics debris and screening the cold bore cryogenic system from beam induced heating. The beam screen operates in the range 40-60 K whereas the magnet cold bore temperature is 1.9 K. A tungsten-based material is used to absorb the energy of particles. In this paper, measurements of the mechanical and physical properties of such tungsten material are shown at room and cryogenic temperature. In addition, the design and the thermal mechanical behaviour of the beam screen assembly are presented also. They include the heat transfer from the tungsten absorbers to the cooling pipes and the supporting system that has to minimise the heat inleak into the cold mass. The behaviour during a magnet quench is also presented.

7 CFR 361.10 - Costs and charges.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., DEPARTMENT OF AGRICULTURE IMPORTATION OF SEED AND SCREENINGS UNDER THE FEDERAL SEED ACT § 361.10 Costs and..., labeling, other reconditioning, or destruction of seed, screenings, or refuse under this part shall be reimbursed by the owner or consignee of the seed or screenings. ...

Frequency of Red Cell Alloimmunization and Autoimmunization in Thalassemia Patients: A Report from Eastern India.

PubMed

Datta, Suvro Sankha; Mukherjee, Somnath; Talukder, Biplabendu; Bhattacharya, Prasun; Mukherjee, Krishnendu

2015-01-01

Introduction. Red blood cell (RBC) alloimmunization and autoimmunization remain a major problem in transfusion dependent thalassemic patients. There is a paucity of data on the incidence of RBC alloimmunization and autoimmunization in thalassemic patients from eastern part of India, as pretransfusion antibody screening is not routinely performed. Aims. To assess the incidence of RBC alloimmunization and autoimmunization in transfusion dependent thalassemic patients in eastern India. Materials and Methods. Total 500 thalassemia cases were evaluated. The antibody screening and identification were performed with commercially available panel cells (Diapanel, Bio-rad, Switzerland) by column agglutination method. To detect autoantibodies, autocontrol and direct antiglobulin tests were carried out using polyspecific coombs (IgG + C3d) gel cards in all patients. Results. A total of 28 patients developed RBC alloimmunization (5.6%) and 5 patients had autoantibodies (1%). Alloantibody against c had the highest incidence (28.57%) followed by E (21.42%). Five out of 28 (17.85%) patients had developed antibodies against both c and E. Conclusion. Data from this study demonstrate that the RBC alloantibody and autoantibody development rates are significant in our region. Thus, pretransfusion antibody screening needs to be initiated in eastern India in order to ensure safe transfusion practice.

Frequency of Red Cell Alloimmunization and Autoimmunization in Thalassemia Patients: A Report from Eastern India

PubMed Central

Datta, Suvro Sankha; Talukder, Biplabendu; Bhattacharya, Prasun; Mukherjee, Krishnendu

2015-01-01

Introduction. Red blood cell (RBC) alloimmunization and autoimmunization remain a major problem in transfusion dependent thalassemic patients. There is a paucity of data on the incidence of RBC alloimmunization and autoimmunization in thalassemic patients from eastern part of India, as pretransfusion antibody screening is not routinely performed. Aims. To assess the incidence of RBC alloimmunization and autoimmunization in transfusion dependent thalassemic patients in eastern India. Materials and Methods. Total 500 thalassemia cases were evaluated. The antibody screening and identification were performed with commercially available panel cells (Diapanel, Bio-rad, Switzerland) by column agglutination method. To detect autoantibodies, autocontrol and direct antiglobulin tests were carried out using polyspecific coombs (IgG + C3d) gel cards in all patients. Results. A total of 28 patients developed RBC alloimmunization (5.6%) and 5 patients had autoantibodies (1%). Alloantibody against c had the highest incidence (28.57%) followed by E (21.42%). Five out of 28 (17.85%) patients had developed antibodies against both c and E. Conclusion. Data from this study demonstrate that the RBC alloantibody and autoantibody development rates are significant in our region. Thus, pretransfusion antibody screening needs to be initiated in eastern India in order to ensure safe transfusion practice. PMID:26425124

Electronic fitness function for screening semiconductors as thermoelectric materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xing, Guangzong; Sun, Jifeng; Li, Yuwei

Here, we introduce a simple but efficient electronic fitness function (EFF) that describes the electronic aspect of the thermoelectric performance. This EFF finds materials that overcome the inverse relationship between σ and S based on the complexity of the electronic structures regardless of specific origin (e.g., isosurface corrugation, valley degeneracy, heavy-light bands mixture, valley anisotropy or reduced dimensionality). This function is well suited for application in high throughput screening. We applied this function to 75 different thermoelectric and potential thermoelectric materials including full- and half-Heuslers, binary semiconductors, and Zintl phases. We find an efficient screening using this transport function. Themore » EFF identifies known high-performance p- and n-type Zintl phases and half-Heuslers. In addition, we find some previously unstudied phases with superior EFF.« less

Electronic fitness function for screening semiconductors as thermoelectric materials

DOE PAGES

Xing, Guangzong; Sun, Jifeng; Li, Yuwei; ...

2017-11-17

Here, we introduce a simple but efficient electronic fitness function (EFF) that describes the electronic aspect of the thermoelectric performance. This EFF finds materials that overcome the inverse relationship between σ and S based on the complexity of the electronic structures regardless of specific origin (e.g., isosurface corrugation, valley degeneracy, heavy-light bands mixture, valley anisotropy or reduced dimensionality). This function is well suited for application in high throughput screening. We applied this function to 75 different thermoelectric and potential thermoelectric materials including full- and half-Heuslers, binary semiconductors, and Zintl phases. We find an efficient screening using this transport function. Themore » EFF identifies known high-performance p- and n-type Zintl phases and half-Heuslers. In addition, we find some previously unstudied phases with superior EFF.« less

High-throughput screening of nanoparticle catalysts made by flame spray pyrolysis as hydrocarbon/NO oxidation catalysts.

PubMed

Weidenhof, B; Reiser, M; Stöwe, K; Maier, W F; Kim, M; Azurdia, J; Gulari, E; Seker, E; Barks, A; Laine, R M

2009-07-08

We describe here the use of liquid-feed flame spray pyrolysis (LF-FSP) to produce high surface area, nonporous, mixed-metal oxide nanopowders that were subsequently subjected to high-throughput screening to assess a set of materials for deNO(x) catalysis and hydrocarbon combustion. We were able to easily screen some 40 LF-FSP produced materials. LF-FSP produces nanopowders that very often consist of kinetic rather than thermodynamic phases. Such materials are difficult to access or are completely inaccessible via traditional catalyst preparation methods. Indeed, our studies identified a set of Ce(1-x)Zr(x)O(2) and Al(2)O(3)-Ce(1-x)Zr(x)O(2) nanopowders that offer surprisingly good activities for both NO(x) reduction and propane/propene oxidation both in high-throughput screening and in continuous flow catalytic studies. All of these catalysts offer activities comparable to traditional Pt/Al(2)O(3) catalysts but without Pt. Thus, although Pt-free, they are quite active for several extremely important emission control reactions, especially considering that these are only first generation materials. Indeed, efforts to dope the active catalysts with Pt actually led to lower catalytic activities. Thus the potential exists to completely change the materials used in emission control devices, especially for high-temperature reactions as these materials have already been exposed to 1500 degrees C; however, much research must be done before this potential is verified.

GSFC preferred parts lists PPL-17

NASA Technical Reports Server (NTRS)

Baldini, B. P. (Editor)

1984-01-01

A listing of preferred parts, part upgrading procedures, part derating guidelines, and part screening procedures to be used in the selection, procurement, and application of parts for Goddard Space Flight Center (GSFC) space systems and ground support equipment is contained.

Screening assessment and requirements for a comprehensive assessment: Volume 1, Draft. Columbia River comprehensive impact assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-04-01

To evaluate the impact to the Columbia River from the Hanford Site-derived contaminants, the U.S. Department of Energy, U.S. Environmental Protection Agency, and Washington State Department of Ecology initiated a study referred to as the Columbia River Comprehensive Impact Assessment (CRCIA). To address concerns about the scope and direction of CRCIA as well as enhance regulator, tribal, stockholder, and public involvement, the CRCIA Management Team was formed in August 1995. The Team agreed to conduct CRCIA using a phased approach. The initial phase, includes two components: 1) a screening assessment to evaluate the potential impact to the river, resulting frommore » current levels of Hanford-derived contaminants in order to support decisions on Interim Remedial Measures, and 2) a definition of the essential work remaining to provide an acceptable comprehensive river impact assessment. The screening assessment is described in Part I of this report. The essential work remaining is Part II of this report. The objective of the screening assessment is to identify areas where the greatest potential exists for adverse effects on humans or the environment. Part I of this report discusses the scope, technical approach, and results of the screening assessment. Part II defines a new paradigm for predecisional participation by those affected by Hanford cleanup decisions.« less

Identification of intentionally and non-intentionally added substances in plastic packaging materials and their migration into food products.

PubMed

García Ibarra, Verónica; Rodríguez Bernaldo de Quirós, Ana; Paseiro Losada, Perfecto; Sendón, Raquel

2018-05-07

Plastic materials are widely used in food packaging applications; however, there is increased concern because of the possible release of undesirable components into foodstuffs. Migration of plastic constituents not only has the potential to affect product quality but also constitutes a risk to consumer health. In order to check the safety of food contact materials, analytical methodologies to identify potential migrants are required. In the first part of this work, a GC/MS screening method was developed for the identification of components from plastic packaging materials including intentionally and "non-intentionally added substances" (NIAS) as potential migrants. In the second part of this study, the presence of seven compounds (bis (2-ethylhexyl) phthalate (DEHP), diethyl phthalate (DEP), diisobutyl phthalate (DIBP), dibutyl phthalate (DBP), butylated hydroxytoluene (BHT), acetyl tributyl citrate (ATBC), benzophenone (BP)) previously identified in packaging materials were investigated in food products (corn and potatoes snacks, cookies, and cakes). For this purpose, a suitable extraction method was developed and quantification was performed using GC-MS. The developed method was validated in terms of linearity, recovery, repeatability, and limits of detection and quantification. The spiked recoveries varied between 82.7 and 116.1%, and relative standard deviation (RSD) was in the range of 2.22-15.9%. The plasticizer ATBC was the most detected compound (94% samples), followed by DEP (65%), DEHP (47%), BP (44%), DBP (35%), DIBP (21%), and BHT (12%). Regarding phthalates, DEP and DEHP were the most frequently detected compounds in concentrations up to 1.44 μg g -1 . In some samples, only DBP exceeded the European SML of 0.3 mg kg -1 established in Regulation 10/2011. Graphical abstract Chemical migration from plastic packaging into food.

The interdependence between screening methods and screening libraries.

PubMed

Shelat, Anang A; Guy, R Kiplin

2007-06-01

The most common methods for discovery of chemical compounds capable of manipulating biological function involves some form of screening. The success of such screens is highly dependent on the chemical materials - commonly referred to as libraries - that are assayed. Classic methods for the design of screening libraries have depended on knowledge of target structure and relevant pharmacophores for target focus, and on simple count-based measures to assess other properties. The recent proliferation of two novel screening paradigms, structure-based screening and high-content screening, prompts a profound rethink about the ideal composition of small-molecule screening libraries. We suggest that currently utilized libraries are not optimal for addressing new targets by high-throughput screening, or complex phenotypes by high-content screening.

Evaluation of preventive technologies in Germany: case studies of mammography, prostate cancer screening, and fetal ultrasound.

PubMed

Perleth, M; Busse, R; Gibis, B; Brand, A

2001-01-01

In this article, three preventive strategies-mammography screening for breast cancer, PSA screening for prostate cancer, and routine ultrasound in normal pregnancy-are discussed in the context of German health care. Epidemiologic data and German studies evaluating different aspects of these preventive measures were identified and analyzed. Only a few studies could be identified that investigate these preventive measures. Despite sufficient evidence, in part derived from a German study, there is not yet a mammography screening program. In contrast, ultrasound in pregnancy is offered routinely, although there are controversies regarding the benefit of this practice. PSA screening is not offered as part of the screening program for prostate cancer. However, PSA tests as well as mammographies are done in large numbers in German ambulatory care-a practice that could be considered wild or opportunistic screening. These case studies show that preventive programs and practices in Germany are not sufficiently based on sound evidence. The paucity of evaluation activities related to prevention in Germany is probably due to the low threshold to introduce new preventive programs into the German healthcare system in the past.

Efficiently mapping structure-property relationships of gas adsorption in porous materials: application to Xe adsorption.

PubMed

Kaija, A R; Wilmer, C E

2017-09-08

Designing better porous materials for gas storage or separations applications frequently leverages known structure-property relationships. Reliable structure-property relationships, however, only reveal themselves when adsorption data on many porous materials are aggregated and compared. Gathering enough data experimentally is prohibitively time consuming, and even approaches based on large-scale computer simulations face challenges. Brute force computational screening approaches that do not efficiently sample the space of porous materials may be ineffective when the number of possible materials is too large. Here we describe a general and efficient computational method for mapping structure-property spaces of porous materials that can be useful for adsorption related applications. We describe an algorithm that generates random porous "pseudomaterials", for which we calculate structural characteristics (e.g., surface area, pore size and void fraction) and also gas adsorption properties via molecular simulations. Here we chose to focus on void fraction and Xe adsorption at 1 bar, 5 bar, and 10 bar. The algorithm then identifies pseudomaterials with rare combinations of void fraction and Xe adsorption and mutates them to generate new pseudomaterials, thereby selectively adding data only to those parts of the structure-property map that are the least explored. Use of this method can help guide the design of new porous materials for gas storage and separations applications in the future.

7 CFR 361.2 - Preemption of State and local laws; general restrictions on the importation of seed and screenings.

Code of Federal Regulations, 2011 CFR

2011-01-01

... restrictions on the importation of seed and screenings. 361.2 Section 361.2 Agriculture Regulations of the... IMPORTATION OF SEED AND SCREENINGS UNDER THE FEDERAL SEED ACT § 361.2 Preemption of State and local laws; general restrictions on the importation of seed and screenings. (a) The regulations in this part preempt...

7 CFR 361.2 - Preemption of State and local laws; general restrictions on the importation of seed and screenings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... restrictions on the importation of seed and screenings. 361.2 Section 361.2 Agriculture Regulations of the... IMPORTATION OF SEED AND SCREENINGS UNDER THE FEDERAL SEED ACT § 361.2 Preemption of State and local laws; general restrictions on the importation of seed and screenings. (a) The regulations in this part preempt...

The University of Kansas High-Throughput Screening Laboratory. Part II: enabling collaborative drug-discovery partnerships through cutting-edge screening technology

PubMed Central

McDonald, Peter R; Roy, Anuradha; Chaguturu, Rathnam

2011-01-01

The University of Kansas High-Throughput Screening (KU HTS) core is a state-of-the-art drug-discovery facility with an entrepreneurial open-service policy, which provides centralized resources supporting public- and private-sector research initiatives. The KU HTS core was established in 2002 at the University of Kansas with support from an NIH grant and the state of Kansas. It collaborates with investigators from national and international academic, nonprofit and pharmaceutical organizations in executing HTS-ready assay development and screening of chemical libraries for target validation, probe selection, hit identification and lead optimization. This is part two of a contribution from the KU HTS laboratory. PMID:21806374

Colorectal Cancer: Cost-effectiveness of Colonoscopy versus CT Colonography Screening with Participation Rates and Costs.

PubMed

van der Meulen, Miriam P; Lansdorp-Vogelaar, Iris; Goede, S Lucas; Kuipers, Ernst J; Dekker, Evelien; Stoker, Jaap; van Ballegooijen, Marjolein

2018-06-01

Purpose To compare the cost-effectiveness of computed tomographic (CT) colonography and colonoscopy screening by using data on unit costs and participation rates from a randomized controlled screening trial in a dedicated screening setting. Materials and Methods Observed participation rates and screening costs from the Colonoscopy or Colonography for Screening, or COCOS, trial were used in a microsimulation model to estimate costs and quality-adjusted life-years (QALYs) gained with colonoscopy and CT colonography screening. For both tests, the authors determined optimal age range and screening interval combinations assuming a 100% participation rate. Assuming observed participation for these combinations, the cost-effectiveness of both tests was compared. Extracolonic findings were not included because long-term follow-up data are lacking. Results The participation rates for colonoscopy and CT colonography were 21.5% (1276 of 5924 invitees) and 33.6% (982 of 2920 invitees), respectively. Colonoscopy was more cost-effective in the screening strategies with one or two lifetime screenings, whereas CT colonography was more cost-effective in strategies with more lifetime screenings. CT colonography was the preferred test for willingness-to-pay-thresholds of €3200 per QALY gained and higher, which is lower than the Dutch willingness-to-pay threshold of €20 000. With equal participation, colonoscopy was the preferred test independent of willingness-to-pay thresholds. The findings were robust for most of the sensitivity analyses, except with regard to relative screening costs and subsequent participation. Conclusion Because of the higher participation rates, CT colonography screening for colorectal cancer is more cost-effective than colonoscopy screening. The implementation of CT colonography screening requires previous satisfactory resolution to the question as to how best to deal with extracolonic findings. © RSNA, 2018 Online supplemental material is available for this article.

Electroanalytical Evaluation of Nanoparticles by Nano-impact Electrochemistry

NASA Astrophysics Data System (ADS)

Karimi, Anahita

Applications of engineered nanoparticles in electronics, catalysis, solid oxide fuel cells, medicine and sensing continue to increase. Traditionally, nanoparticle systems are characterized by spectroscopic and microscopic techniques. These methods are cumbersome and expensive, which limit their routine use for screening purposes. Electrochemistry is a powerful, yet underutilized tool, for the detection and classification of nanoparticles. The first part of this dissertation investigates a recently developed electrochemical method -- nanoparticle collision electrochemistry -- for detection and characterization of nanoparticles. Three independent projects have been described to evaluate the use of this technique for characterizing nanoparticle based systems including: conjugation with biomolecules, interaction with environmental contaminants and fundamental investigation of conformational changes of nanoparticle capping ligands. The thesis reports the first use of nano-impact electrochemistry to quantitatively investigate bioconjugation and biomolecular recognition at conductive nanoparticles. Furthermore, we also demonstrate the potential of this method as a single step, reagentless and label-free technique for the ultra-sensitive detection of biomolecular targets. A fundamental study of biorecognition is important for the development of therapeutics and molecular diagnosis probes in the biomedical, biosensing and biotechnology fields. The second project describes the use of this method as a screening tool of particle reactivity. We study the interaction and adsorption of a toxic environmental metalloid (Arsenic) with metal oxide nanoparticles to extract mechanistic, speciation and loading information. We discuss the potential of this approach to complement or replace costly characterization techniques and enable routine study of nanoparticles and their reactivity. In the third project, we use the nano-impact method to study the pH-dependent conformational changes of polymeric capping agents on the surface of silver nanoparticles. Nano-impact elecrochemistry has demonstrated promising results for studying functionality, stability and conformational changes of stabilizing agents. The second part of this thesis explores the use of carbon nanomaterials such as graphene and Pt-doped CeO2 for the rational design of enzyme-conjugated nanostructures for biosensing applications. The dissertation reports fabrication, characterization and properties of hybrid CeO2-based bioelectrocatalytic nanostructure material with PEDOT:PSS [poly(3,4ethylenedioxythiophene):poly-styrene-sulfonic acid] on porous carbon materials as novel materials for designing high performance laccase (Lac) biocathodes and biofuel cells.

Colorectal (Colon) Cancer: What Are the Risk Factors?

MedlinePlus

... for Life Campaign Print Materials Fact Sheet Brochures Posters Postcards Public Service Announcements Personal Screening Stories Campaign Research Poster Presentation: Why Should I Get Screened? Colorectal Cancer ...

Colorectal (Colon) Cancer: Questions to Ask Your Doctor

MedlinePlus

... for Life Campaign Print Materials Fact Sheet Brochures Posters Postcards Public Service Announcements Personal Screening Stories Campaign Research Poster Presentation: Why Should I Get Screened? Colorectal Cancer ...

Discover, touch, remember. Teacher's role in forming student's sensitivity for nature.

NASA Astrophysics Data System (ADS)

Piątkowska, Kornelia; Dacy-Ignatiuk, Katarzyna

2015-04-01

Contemporary young Poles more frequently look into a smart phone screen than around themselves. Browsing the Internet, young people rarely focus on one website for a longer period of time. Learning about the attractions of the surrounding world through a computer screen since childhood they lack the sense of security, and therefore, the intercourse with the real world comes with difficulty. As a result their brains work differently than in people 10 - 15 years elder. The very important role of a teacher, who introduces young man into the secrets of knowledge, is not only a presentation of ready-made content and solutions, but making him attempt to undertake various activities. Teacher is a kind of a signpost. He indicates principal directions and also forces to make, often difficult, decisions. Natural sciences are a perfect material for such an education. The authors' long - term experience in working with pupils suggests that proposing to young people alternative ways of acquiring knowledge out-of-doors is a good practice and method of finding scientifically gifted students. Self made experiments and observations help them to reach set goals and achieve better results. Such encounters with nature outside the classroom are also attractive for pupils so far disinterested in natural sciences. The most common actions are: workshops, educational camps, minerals exhibitions, excursions to attractive geological areas, taking part in geological competitions, organizing and taking part in scientific lectures.

Colorado SIP: 5 CCR 1001-13, Reg 11, Motor Vehicle Emissions Inspection Program—Part A, General Provisions, Area of Applicability, Schedules for Obtaining Certification of Emissions Control, Definitions, Exemptions, and Clean Screening/Remote Sensing

EPA Pesticide Factsheets

Colorado SIP: 5 CCR 1001-13, Reg 11, Motor Vehicle Emissions Inspection Program—Part A, General Provisions, Area of Applicability, Schedules for Obtaining Certification of Emissions Control, Definitions, Exemptions, and Clean Screening/Remote Sensing

Optimizing Population Screening of Bullying in School-Aged Children

ERIC Educational Resources Information Center

Vaillancourt, Tracy; Trinh, Vi; McDougall, Patricia; Duku, Eric; Cunningham, Lesley; Cunningham, Charles; Hymel, Shelley; Short, Kathy

2010-01-01

A two-part screening procedure was used to assess school-age children's experience with bullying. In the first part 16,799 students (8,195 girls, 8,604 boys) in grades 4 to 12 were provided with a definition of bullying and then asked about their experiences using two general questions from the Olweus Bully/Victim Questionnaire (1996). In the…

Arc Jet Screening Tests Of Phase 1 Orbiter Tile Repair Materials and Uncoated RSI High Temperature Emittance Measurements

NASA Technical Reports Server (NTRS)

DelPapa, Steven V.

2005-01-01

Arc jet tests of candidate tile repair materials and baseline Orbiter uncoated reusable surface insulation (RSI) were performed in the Johnson Space Center's (JSC) Atmospheric Reentry Materials and Structures Evaluation Facility (ARMSEF) from June 23, 2003, through August 19, 2003. These tests were performed to screen candidate tile repair materials by verifying the high temperature performance and determining the thermal stability. In addition, tests to determine the surface emissivity at high temperatures and the geometric shrinkage of bare RSI were performed. In addition, tests were performed to determine the surface emissivity at high temperatures and the geometric shrinkage of uncoated RSI.

Adolescent and Parent Attitudes Toward Screening for Suicide Risk and Mental Health Problems in the Pediatric Emergency Department

PubMed Central

O’Mara, Roisin M.; Hill, Ryan M.; Cunningham, Rebecca M.; King, Cheryl A.

2016-01-01

Objective The objective of this study was to investigate adolescent and parent attitudes toward screening adolescents for suicide risk and other mental health problems in the emergency department (ED). Methods Two hundred ninety-four adolescents and 300 parents completed questionnaires about the importance of screening for suicide risk and other mental health problems in the ED, what would be helpful if the screen was positive, their concerns about screening in the ED, whether they believe screening should be a routine part of an ED visit, and whether they would complete a screening during the current visit if offered the opportunity. Results Overall, parents and adolescents reported positive attitudes toward screening for suicide risk and other mental health problems in the ED, with the majority responding that it should be a routine part of ED care. Suicide risk and drug and alcohol misuse were rated as more important to screen for than any of the other mental health problems by both parents and adolescents. Adolescent females and mothers were more supportive of screening for suicide risk and mental health problems in the ED than male adolescents and fathers. Descriptive data regarding screening concerns and follow-up preferences are reported. Conclusions Study results suggest overall positive support for screening for suicide risk and other mental health problems in the ED, with some important preferences, concerns, and parent versus adolescent and male versus female differences. PMID:22743751

Affordable Development and Optimization of CERMET Fuels for NTP Ground Testing

NASA Technical Reports Server (NTRS)

Hickman, Robert R.; Broadway, Jeramie W.; Mireles, Omar R.

2014-01-01

CERMET fuel materials for Nuclear Thermal Propulsion (NTP) are currently being developed at NASA's Marshall Space Flight Center. The work is part of NASA's Advanced Space Exploration Systems Nuclear Cryogenic Propulsion Stage (NCPS) Project. The goal of the FY12-14 project is to address critical NTP technology challenges and programmatic issues to establish confidence in the affordability and viability of an NTP system. A key enabling technology for an NCPS system is the fabrication of a stable high temperature nuclear fuel form. Although much of the technology was demonstrated during previous programs, there are currently no qualified fuel materials or processes. The work at MSFC is focused on developing critical materials and process technologies for manufacturing robust, full-scale CERMET fuels. Prototypical samples are being fabricated and tested in flowing hot hydrogen to understand processing and performance relationships. As part of this initial demonstration task, a final full scale element test will be performed to validate robust designs. The next phase of the project will focus on continued development and optimization of the fuel materials to enable future ground testing. The purpose of this paper is to provide a detailed overview of the CERMET fuel materials development plan. The overall CERMET fuel development path is shown in Figure 2. The activities begin prior to ATP for a ground reactor or engine system test and include materials and process optimization, hot hydrogen screening, material property testing, and irradiation testing. The goal of the development is to increase the maturity of the fuel form and reduce risk. One of the main accomplishmens of the current AES FY12-14 project was to develop dedicated laboratories at MSFC for the fabrication and testing of full length fuel elements. This capability will enable affordable, near term development and optimization of the CERMET fuels for future ground testing. Figure 2 provides a timeline of the development and optimization tasks for the AES FY15-17 follow on program.

Design and results of a culturally tailored cancer outreach project by and for Micronesian women.

PubMed

Aitaoto, Nia; Braun, Kathryn L; Estrella, Julia; Epeluk, Aritae; Tsark, JoAnn

2012-01-01

In 2005, approximately 26% of Micronesian women aged 40 or older in Hawai'i used mammography for breast cancer screening. We describe an 18-month project to increase screening participation in this population by tailoring educational materials and using a lay educator approach. New immigrants to Hawai'i are Marshallese from the Republic of the Marshall Islands and Chuukese, Pohnpeians, and Kosraeans from the Federated States of Micronesia. In Hawai'i, these 4 groups refer to themselves collectively as Micronesians, although each group has its own distinct culture and language. From 2006 through 2007, we applied principles of community-based participatory research--trust building, joint assessment, cultural tailoring of materials, and skills transfer--to develop and track the reach of Micronesian women lay educators in implementing a cancer awareness program among Micronesian women living in Hawai'i. Using our tailored in-language materials, 11 lay educators (5 Chuukese, 3 Marshallese, 2 Pohnpeians, and 1 Kosraean) provided one-on-one and small group in-language cancer information sessions to 567 Micronesian women (aged 18-75 years). Among the 202 women aged 40 or older eligible for mammography screening, 166 (82%) had never had a mammogram and were assisted to screening appointments. After 6 months, 146 (88%) of the 166 had received a mammogram, increasing compliance from 18% to 90%. Lay educators reported increases in their skills and their self-esteem and want to extend their skills to other health issues, including diabetes management and immunization. Tailoring materials and using the lay educator model successfully increased participation in breast cancer screening. This model may work in other communities that aim to reduce disparities in access to cancer screening.

45 CFR 400.107 - Medical screening.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 2 2014-10-01 2012-10-01 true Medical screening. 400.107 Section 400.107 Public... AND FAMILIES, DEPARTMENT OF HEALTH AND HUMAN SERVICES REFUGEE RESETTLEMENT PROGRAM Refugee Medical Assistance Scope of Medical Services § 400.107 Medical screening. (a) As part of its refugee medical...

45 CFR 400.107 - Medical screening.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 2 2013-10-01 2012-10-01 true Medical screening. 400.107 Section 400.107 Public... AND FAMILIES, DEPARTMENT OF HEALTH AND HUMAN SERVICES REFUGEE RESETTLEMENT PROGRAM Refugee Medical Assistance Scope of Medical Services § 400.107 Medical screening. (a) As part of its refugee medical...

45 CFR 400.107 - Medical screening.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 2 2012-10-01 2012-10-01 false Medical screening. 400.107 Section 400.107 Public... AND FAMILIES, DEPARTMENT OF HEALTH AND HUMAN SERVICES REFUGEE RESETTLEMENT PROGRAM Refugee Medical Assistance Scope of Medical Services § 400.107 Medical screening. (a) As part of its refugee medical...

45 CFR 400.107 - Medical screening.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 2 2010-10-01 2010-10-01 false Medical screening. 400.107 Section 400.107 Public... AND FAMILIES, DEPARTMENT OF HEALTH AND HUMAN SERVICES REFUGEE RESETTLEMENT PROGRAM Refugee Medical Assistance Scope of Medical Services § 400.107 Medical screening. (a) As part of its refugee medical...

45 CFR 400.107 - Medical screening.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 2 2011-10-01 2011-10-01 false Medical screening. 400.107 Section 400.107 Public... AND FAMILIES, DEPARTMENT OF HEALTH AND HUMAN SERVICES REFUGEE RESETTLEMENT PROGRAM Refugee Medical Assistance Scope of Medical Services § 400.107 Medical screening. (a) As part of its refugee medical...

Post-Test Inspection of NASA's Evolutionary Xenon Thruster Long Duration Test Hardware: Ion Optics

NASA Technical Reports Server (NTRS)

Soulas, George C.; Shastry, Rohit

2016-01-01

A Long Duration Test (LDT) was initiated in June 2005 as a part of NASA's Evolutionary Xenon Thruster (NEXT) service life validation approach. Testing was voluntarily terminated in February 2014, with the thruster accumulating 51,184 hours of operation, processing 918 kg of xenon propellant, and delivering 35.5 MN-s of total impulse. The post-test inspection objectives for the ion optics were derived from the original NEXT LDT test objectives, such as service life model validation, and expanded to encompass other goals that included verification of in situ measurements, test issue root causes, and past design changes. The ion optics cold grid gap had decreased only by an average of 7% of pretest center grid gap, so efforts to stabilize NEXT grid gap were largely successful. The upstream screen grid surface exhibited a chamfered erosion pattern. Screen grid thicknesses were = 86% of the estimated pretest thickness, indicating that the screen grid has substantial service life remaining. Deposition was found on the screen aperture walls and downstream surfaces that was primarily composed of grid material and back-sputtered carbon, and this deposition likely caused the minor decreases in screen grid ion transparency during the test. Groove depths had eroded through up to 35% of the accelerator grid thickness. Minimum accelerator aperture diameters increased only by about 5-7% of the pretest values and downstream surface diameters increased by about 24-33% of the pretest diameters. These results suggest that increasing the accelerator aperture diameters, improving manufacturing tolerances, and masking down the perforated diameter to 36 cm were successful in reducing the degree of accelerator aperture erosion at larger radii.

An Assessment of the Likelihood, Frequency, and Content of Verbal Communication Between Radiologists and Women Receiving Screening and Diagnostic Mammography

PubMed Central

Carney, Patricia A.; Kettler, Mark; Cook, Andrea J.; Geller, Berta M.; Karliner, Leah; Miglioretti, Diana L.; Bowles, Erin Aiello; Buist, Diana S.; Gallagher, Thomas H.; Elmore, Joann G.

2009-01-01

Rationale & Objective Research on communication between radiologists and women undergoing screening and diagnostic mammography is limited. We describe community radiologists’ communication practices with patients regarding screening and diagnostic mammogram results and factors associated with frequency of communication. Materials & Methods We received surveys from 257 radiologists (70% of those eligible) about the extent to which they talk to women as part of their healthcare visit for either screening or diagnostic mammograms, whether this occurs if the exam assessment is positive or negative, and how they use estimates of patient risk to convey information about an abnormal exam where the specific finding of cancer is not yet known. We also assessed characteristics of the radiologists to identify associations with more or less frequent communication at the time of the mammogram. Results Two hundred and forty-three radiologists provided complete data (95%). Very few (<6%) reported routinely communicating with women when screening mammograms were either normal or abnormal. Less than half (47%) routinely communicated with women when their diagnostic mammograms were normal, while 77% often or always communicated with women when their diagnostic exams were abnormal. For positive diagnostic exams, female radiologists were more likely to be frequent communicators compared to males (87.1% to 72.8%; p-value = 0.02) and those who spend 40-79% of their time in breast imaging (94.6%) were more likely to be frequent communicators compared to those who spend less time (67.2%-78.9%; p-value = 0.02). Most radiologists convey risk information using general rather than numeric statements (57.7% vs. 28.5%). Conclusions Radiologists are most likely to convey information about diagnostic mammographic findings when results are abnormal. Most radiologists convey risk information using general rather than numeric statements. PMID:19442539

Toward the design of alkynylimidazole fluorophores: computational and experimental characterization of spectroscopic features in solution and in poly(methyl methacrylate).

PubMed

Barone, Vincenzo; Bellina, Fabio; Biczysko, Malgorzata; Bloino, Julien; Fornaro, Teresa; Latouche, Camille; Lessi, Marco; Marianetti, Giulia; Minei, Pierpaolo; Panattoni, Alessandro; Pucci, Andrea

2015-10-28

The possibilities offered by organic fluorophores in the preparation of advanced plastic materials have been increased by designing novel alkynylimidazole dyes, featuring different push and pull groups. This new family of fluorescent dyes was synthesized by means of a one-pot sequential bromination-alkynylation of the heteroaromatic core, and their optical properties were investigated in tetrahydrofuran and in poly(methyl methacrylate). An efficient in silico pre-screening scheme was devised as consisting of a step-by-step procedure employing computational methodologies by simulation of electronic spectra within simple vertical energy and more sophisticated vibronic approaches. Such an approach was also extended to efficiently simulate one-photon absorption and emission spectra of the dyes in the polymer environment for their potential application in luminescent solar concentrators. Besides the specific applications of this novel material, the integration of computational and experimental techniques reported here provides an efficient protocol that can be applied to make a selection among similar dye candidates, which constitute the essential responsive part of those fluorescent plastic materials.

Detail design of the surface tension propellant management device for the Intelsat VII communication satellite

NASA Astrophysics Data System (ADS)

Giacalone, Philip L.

1993-06-01

The design of the Intelsat VII surface tension propellant management device (PMD) (an all-welded assembly consisting of about 100 individual components) was developed using a modular design approach that allowed the complex PMD assembly to be divided into smaller modules. The modular approach reduces manufacturing-related technical and schedule risks and allows many components and assemblies to be processed in parallel, while also facilitating the incorporation of quality assurance tests at all critical PMD subassembly levels. The baseline PMD assembly is made from titanium and stainless steel materials. In order to obtain a 100 percent titanium PMD, a new, state-of-the-art fine mesh titanium screen material was developed, tested, and qualified for use as an alternaltive to the stainless steel screen material. The Ti based screen material demonstrated a high level of bubble point performance. It was integrated into a PMD assembly and was successfully qualification tested at the tank assembly level.

Trade-off between benefit and harm is crucial in health screening recommendations. Part II: evidence summaries.

PubMed

Silvestre, Maria Asuncion A; Dans, Leonila F; Dans, Antonio L

2011-03-01

Evidence on the effectiveness of health screening strategies may be direct (i.e., studies on screening vs. no screening) or indirect (i.e., studies that separately evaluate the screening test[s], the confirmatory test, or the treatment). Critical trade-offs in the balance between harm and benefit for many screening strategies mandate that advocates of health screening adhere to the ethical precepts of nonmaleficence, autonomy, confidentiality, and equity. In our first article, we pointed out five prerequisites to justifying a health screening program: (1) the burden of illness should be high, (2) the screening and confirmatory tests should be accurate, (3) early treatment (or prevention) must be more effective than late treatment, (4) the tests and the treatment(s) must be safe, and (5) the cost of the screening strategy must be commensurate with the potential benefit. As can be gleaned from these criteria, recommendations on screening must be tailored to specific populations. Recommendations in one country, no matter how authoritative, cannot be generalized to apply to all other countries. Although accuracy, effectiveness, and safety data may be global (criteria 2-4), burden of illness and efficiency (criteria 1 and 5) will always vary from country to country. Rather than review various national guidelines, in this last article of our two-part series, we present evidence summaries to illustrate health screening. Our examples were selected to address special issues related to four situations-screening for cancer, risk factors for disease, genetic disorders, and infectious diseases. Copyright © 2011 Elsevier Inc. All rights reserved.

Evolving the EPA Endocrine Disruptor Screening Program: The case for and against using high-throughput screening assays in EDSP Tier 1

EPA Science Inventory

Testing has begun as part of the EPA Endocrine Disruptor Screening Program (EDSP) Tier 1 battery of 11 in vitro and in vivo tests. A recognized issue with the EDSP is that the current Tier 1 screening battery is highly resource intensive in terms of cost, time and animal usage fo...

Zebrafish Developmental Screening of the ToxCast™ Phase I Chemical Library

EPA Science Inventory

Zebrafish (Danio rerio) is an emerging toxicity screening model for both human health and ecology. As part of the Computational Toxicology Research Program of the U.S. EPA, the toxicity of the 309 ToxCast™ Phase I chemicals was assessed using a zebrafish screen for developmental ...

Toxicity Screening of the ToxCast Chemical Library Using a Zebrafish Developmental Assay

EPA Science Inventory

As part of the chemical screening and prioritization research program of the U.S. Environmental Protection Agency, the toxicity of the 320 ToxCast™ Phase I chemicals were assessed using a vertebrate screen of developmental toxicity. Zebrafish embryos/larvae (Danio rerio) were exp...

78 FR 4411 - Agency Forms Undergoing Paperwork Reduction Act Review

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-22

... potential study population is unique in that their children experienced newborn CMV screening as part of a previous research study. Universal CMV screening has not been recommended by medical associations or state.... Newborn CMV screening offers some clear potential benefits, but few studies have assessed the potential...

Dose response screening of the Toxcast chemical library using a Zebrafish developmental assay

EPA Science Inventory

As part of the chemical screening and prioritization research program of the U.S. Environmental Protection Agency, the toxicity of the 320 ToxCaspM Phase I chemicals was assessed using a vertebrate screen of developmental toxicity. Zebrafish embryos/larvae (Danio rerio) were expo...

High-resolution microendoscope for the detection of cervical neoplasia.

PubMed

Grant, Benjamin D; Schwarz, Richard A; Quang, Timothy; Schmeler, Kathleen M; Richards-Kortum, Rebecca

2015-01-01

Cervical cancer causes 275,000 deaths each year with 85 % of these deaths occurring in the developing world. One of the primary reasons for the concentration of deaths in developing countries is a lack of effective screening methods suited for the infrastructure of these countries. In order to address this need, we have developed a high-resolution microendoscope (HRME). The HRME is a fiber-based fluorescence microscope with subcellular resolution. Using the vital stain proflavine, we are able to image cell nuclei in vivo and evaluate metrics such as nuclear-to-cytoplasmic ratio, critical to identifying precancerous epithelial regions. In this chapter, we detail the materials and methods necessary to build this system from commercially available parts.

Trials and projects on cervical cancer and human papillomavirus prevention in sub-Saharan Africa.

PubMed

Adefuye, Peter O; Broutet, Nathalie J; de Sanjosé, Silvia; Denny, Lynette A

2013-12-29

Cervical cancer is the leading cause of cancer morbidity and mortality in women in sub-Saharan Africa (SSA), accounting for about 50,000 deaths annually. Until recently, cytology was the gold standard for screening and prevention of cervical cancer. This method of screening has not been successful in SSA due to a lack of human, financial and material resources and poor health care infrastructure. It is estimated that less than 5% of at risk women have ever being screened. In the past two decades alternative approaches to cytology for cervical cancer screening have been evaluated in low- and medium-income countries. Visual inspection with acetic acid (VIA) and/or Lugol's iodine (VILI) have been shown to have adequate sensitivity, although low specificity, in a number of cross-sectional research and demonstration projects. Visual inspection methods require minimal resources, are technologically accessible, and are feasible for screening for precancerous lesions. Linking screening with VIA/VILI to treatment with cryotherapy may enable screening and treatment to take place in one visit, but this is likely to result in large numbers of women being subjected to unnecessary treatment. A number of studies have shown that cryotherapy is not associated with significant side effects or complications and is well tolerated. Creating the infrastructure for screening of older women is considered desirable, despite the limitations of visual inspection methods as screening tests. Understanding the role of human papillomavirus (HPV) infection in the etiology of cervical cancer and the discovery of HPV rapid test kits, as well as the development of vaccines against the HPV oncogenic types, have created new opportunities for prevention of cervical cancer. Trials and projects have established (and are still ongoing) the feasibility of using these molecular tests for screening. The ultimate in prevention method is primary prevention, offered by the advent of prophylactic vaccines against the most important oncogenic types, namely HPV16 and 18. This article forms part of a regional report entitled "Comprehensive Control of HPV Infections and Related Diseases in the Sub-Saharan Africa Region" Vaccine Volume 31, Supplement 5, 2013. Updates of the progress in the field are presented in a separate monograph entitled "Comprehensive Control of HPV Infections and Related Diseases" Vaccine Volume 30, Supplement 5, 2012. Copyright © 2012 Elsevier Ltd. All rights reserved.

A practical approach to screen for authorised and unauthorised genetically modified plants.

PubMed

Waiblinger, Hans-Ulrich; Grohmann, Lutz; Mankertz, Joachim; Engelbert, Dirk; Pietsch, Klaus

2010-03-01

In routine analysis, screening methods based on real-time PCR are most commonly used for the detection of genetically modified (GM) plant material in food and feed. In this paper, it is shown that the combination of five DNA target sequences can be used as a universal screening approach for at least 81 GM plant events authorised or unauthorised for placing on the market and described in publicly available databases. Except for maize event LY038, soybean events DP-305423 and BPS-CV127-9 and cotton event 281-24-236 x 3006-210-23, at least one of the five genetic elements has been inserted in these GM plants and is targeted by this screening approach. For the detection of these sequences, fully validated real-time PCR methods have been selected. A screening table is presented that describes the presence or absence of the target sequences for most of the listed GM plants. These data have been verified either theoretically according to available databases or experimentally using available reference materials. The screening table will be updated regularly by a network of German enforcement laboratories.

Leakage Currents and Gas Generation in Advanced Wet Tantalum Capacitors

NASA Technical Reports Server (NTRS)

Teverovsky, Alexander

2015-01-01

Currently, military grade, established reliability wet tantalum capacitors are among the most reliable parts used for space applications. This has been achieved over the years by extensive testing and improvements in design and materials. However, a rapid insertion of new types of advanced, high volumetric efficiency capacitors in space systems without proper testing and analysis of degradation mechanisms might increase risks of failures. The specifics of leakage currents in wet electrolytic capacitors is that the conduction process is associated with electrolysis of electrolyte and gas generation resulting in building up of internal gas pressure in the parts. The risk associated with excessive leakage currents and increased pressure is greater for high value advanced wet tantalum capacitors, but it has not been properly evaluated yet. In this work, in Part I, leakages currents in various types of tantalum capacitors have been analyzed in a wide range of voltages, temperatures, and time under bias. Gas generation and the level of internal pressure have been calculated in Part II for different case sizes and different hermeticity leak rates to assess maximal allowable leakage currents. Effects related to electrolyte penetration to the glass seal area have been studied and the possibility of failures analyzed in Part III. Recommendations for screening and qualification to reduce risks of failures have been suggested.

Maintaining quality in the UK breast screening program

NASA Astrophysics Data System (ADS)

Gale, Alastair

2010-02-01

Breast screening in the UK has been implemented for over 20 years and annually nearly two million women are now screened with an estimated 1,400 lives saved. Nationally, some 700 individuals interpret screening mammograms in almost 110 screening centres. Currently, women aged 50 to 70 are invited for screening every three years and by 2012 this age range will increase to 47 - 73 years. There is a rapid ongoing transition from using film mammograms to full field digital mammography such that in 2010 every screening centre will be partly digital. An early, and long running, concern has been how to ensure the highest quality of imaging interpretation across the UK, an issue enhanced by the use of a three year screening interval. To partly address this question a self assessment scheme was developed in 1988 and subsequently implemented nationally in the UK as a virtually mandatory activity. The scheme is detailed from its beginnings, through its various developments to current incarnation and future plans. This encompasses both radiological (single view screening, two view screening, mammographic film and full field digital mammography) as well as design changes (cases reported by means of: form filling; PDA; tablet PC; iPhone, and the internet). The scheme provides a rich data source which is regularly studied to examine different aspects of radiological performance. Overall it aids screening radiologists by giving them regular access to a range of difficult exemplar cases together with feedback on their performance as compared to their peers.

An anomalous interlayer exciton in MoS2

NASA Astrophysics Data System (ADS)

Azhikodan, Dilna; Nautiyal, Tashi; Shallcross, Sam; Sharma, Sangeeta

2016-11-01

The few layer transition metal dichalcogenides are two dimensional materials that have an intrinsic gap of the order of ≈2 eV. The reduced screening in two dimensions implies a rich excitonic physics and, as a consequence, many potential applications in the field of opto-electronics. Here we report that a layer perpendicular electric field, by which the gap size in these materials can be efficiently controlled, generates an anomalous inter-layer exciton whose binding energy is independent of the gap size. We show this originates from the rich gap control and screening physics of TMDCs in a bilayer geometry: gating the bilayer acts on one hand to increase intra-layer screening by reducing the gap and, on the other hand, to decrease the inter-layer screening by field induced charge depletion. This constancy of binding energy is both a striking exception to the universal reduction in binding energy with gap size that all materials are believed to follow, as well as evidence of a degree of control over inter-layer excitons not found in their well studied intra-layer counterparts.

Colorectal Cancer Screening and Chinese Americans: Efficacy of Lay Health Worker Outreach and Print Materials.

PubMed

Nguyen, Tung T; Tsoh, Janice Y; Woo, Kent; Stewart, Susan L; Le, Gem M; Burke, Adam; Gildengorin, Ginny; Pasick, Rena J; Wang, Jun; Chan, Elaine; Fung, Lei-Chun; Jih, Jane; McPhee, Stephen J

2017-03-01

Chinese Americans have low colorectal cancer (CRC) screening rates. Evidence-based interventions to increase CRC screening in this population are lacking. This study aims to compare the efficacy of two interventions in increasing CRC screening among Chinese Americans. Cluster randomized comparative trial. From 2010 to 2014, a community-academic team conducted this study in San Francisco, CA with Chinese Americans aged 50-75 years who spoke English, Cantonese, or Mandarin. Lay health worker (LHW) intervention plus in-language brochure (LHW+Print) versus brochure (Print). LHWs in the LHW+Print arm were trained to teach participants about CRC in two small group sessions and two telephone calls. Change in self-reports of ever having had CRC screening and being up to date for CRC screening from baseline to 6 months post-intervention. Statistical analysis was performed from 2014 to 2015. This study recruited 58 LHWs, who in turn recruited 725 participants. The average age of the participants was 62.2 years, with 81.1% women and 99.4% foreign born. Knowledge increase was significant (p<0.002) for nine measures in the LHW+Print group and six in the Print group. Both groups had increases in having ever been screened for CRC (LHW+Print, 73.9%-88.3%, p<0.0001; Print, 72.3%-79.5%, p=0.0003) and being up to date for CRC screening (LHW+Print, 60.0%-78.1%, p<0.0001; Print, 58.1%-64.1%, p=0.0003). In multivariable analyses, the intervention OR for LHW+Print versus Print was 1.94 (95% CI=1.34, 2.79) for ever screening and 2.02 (95% CI=1.40, 2.90) for being up to date. Both in-language print materials and LHW outreach plus print materials increased CRC screening among Chinese Americans. The combination of LHW+Print was more effective than Print alone. These findings can guide clinicians and policymakers in choosing appropriate interventions to increase CRC screening among Chinese American immigrants. This study is registered at www.clinicaltrials.gov NCT00947206. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

A pilot study of indoor air quality in screen golf courses.

PubMed

Goung, Sun-Ju Nam; Yang, Jinho; Kim, Yoon Shin; Lee, Cheol Min

2015-05-01

The aims of this study were to provide basic data for determining policies on air quality for multi-user facilities, including the legal enrollment of the indoor air quality regulation as designated by the Ministry of Environment, and to establish control plans. To this end, concentrations of ten pollutants (PM10, carbon monoxide (CO), carbon dioxide (CO2), nitrogen dioxide (NO2), formaldehyde (HCHO), total volatile organic compounds (TVOCs), radon (Rn), oxone (O3), total bacteria counts (TBC), and asbestos) in addition to nicotine, a smoking index material used to determine the impact of smoking on the air quality, were investigated in indoor game rooms and lobbies of 64 screen golf courses. The average concentration of none of the ten pollutants in the game rooms and lobbies of screen golf courses was found to exceed the limit set by the law. There were, however, pollutant concentrations exceeding limits in some screen golf courses, in order to establish a control plan for the indoor air quality of screen golf courses, a study on the emission sources of each pollutant was conducted. The major emission sources were found to be facility users' activities such as smoking and the use of combustion appliances, building materials, and finishing materials.

Effectiveness of common fish screen materials to protect lamprey ammocoetes

USGS Publications Warehouse

Rose, Brien P.; Mesa, Matthew G.

2012-01-01

Understanding the effects of irrigation diversions on populations of Pacific lampreyLampetra tridentata in the Columbia River basin is needed for their recovery. We tested the effectiveness of five common fish screen materials for excluding lamprey ammocoetes: interlock (IL), vertical bar (VB), perforated plate (PP), and 12-gauge and 14-gauge wire cloth (WC12) and (WC14). When fish (28–153 mm) were exposed for 60 min to screen panels perpendicular to an approach velocity of 12 cm/s in a recirculating flume, the percentage of ammocoetes entrained (i.e., passed through the screen) was 26% for the IL, 18% for the PP, 33% for the VB, 62% for the WC14, and 65% for the WC12 screens. For all screens, most fish were entrained within the first 15–20 min. Fish length significantly influenced entrainment, with the PP, VB, and IL screens preventing fish greater than 50–65 mm from entrainment and the WC14 and WC12 screens preventing entrainment of fish greater than 90–110 mm. Fish of all sizes repeatedly became impinged (i.e., contacting the screen for more than 1 s) on the screens, with the frequency of impingement events increasing during the first 5 min and becoming relatively stable thereafter. Impingement ranges were highest on the IL screen (36–62%), lowest on the WC14 and WC12 screens (13–31%), and intermediate on the PP and VB screens (23–54%). However, the WC14 and WC12 screens had fewer and larger fish remaining as time elapsed because so many were entrained. For all screen types, injuries were rare and minor, and no fish died after overnight posttest holding. Our results indicate that wire cloth screens should be replaced, where practical, with perforated plate, vertical bar, or interlocking bar screens to reduce lamprey entrainment at water diversions.

30 CFR 77.1001 - Stripping; loose material.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Ground Control § 77.1001 Stripping; loose material. Loose hazardous material shall be stripped for a safe... angle of repose, or barriers, baffle boards, screens, or other devices be provided that afford...

Systems of support to increase colorectal cancer screening and follow-up rates (SOS): design, challenges, and baseline characteristics of trial participants.

PubMed

Green, Beverly B; Wang, C Y; Horner, Kathryn; Catz, Sheryl; Meenan, Richard T; Vernon, Sally W; Carrell, David; Chubak, Jessica; Ko, Cynthia; Laing, Sharon; Bogart, Andy

2010-11-01

Screening decreases colorectal cancer (CRC) morbidity and mortality, yet remains underutilized. Screening breakdowns arise from lack of uptake and failure to follow-up after a positive screening test. Systems of support to increase colorectal cancer screening and follow-up (SOS) is a randomized trial designed to increase: (1) CRC screening and (2) follow-up of positive screening tests. The Chronic Care Model and the Preventive Health Model inform study design. The setting is a large nonprofit healthcare organization. In part-1 study, patients age 50-75 due for CRC screening are randomized to one of 4 study conditions. Arm 1 receives usual care. Arm 2 receives automated support (mailed information about screening choices and fecal occult blood tests (FOBT)). Arm 3 receives automated and assisted support (a medical assistant telephone call). Arm 4 receives automated, assisted, and care management support (a registered nurse provides behavioral activation and coordination of care). In part-2, study patients with a positive FOBT or adenomas on flexible sigmoidoscopy are randomized to receive either usual care or nurse care management. Primary outcomes are: 1) the proportion with CRC screening, 2) the proportion with a complete diagnostic evaluation after a positive screening test. We sent recruitment letters to 15,414 patients and 4675 were randomized. Randomly assigned treatment groups were similar in age, sex, race, education, self-reported health, and CRC screening history. We will determine the effectiveness and cost effectiveness of stepped increases in systems of support to increase CRC screening and follow-up after a positive screening test over 2years. Copyright © 2010 Elsevier Inc. All rights reserved.

[New guidelines in regard to cervical cancer screening].

PubMed

Vargas-Hernández, Víctor Manuel; Acosta-Altamirano, Gustavo; Moreno-Eutimio, Mario Adán; Vargas-Aguilar, Víctor Manuel

2014-01-01

Cancer screening programs have been successful in reducing the incidence and mortality due to cervical cancer. For more than a decade, the human papillomavirus test has been recommended as part of these programs, however, Pap tests is not currently recommended for women 65 years of age who participated adequately in screening programs, continuing with these screening programs is not needed. Screening programs will be different in special populations at greatest risk where tests are frequently needed or use of alternative methods.

Evaluation of nonmetallic thermal protection materials for the manned space shuttle. Volume 1, task 1: Assessment of technical risks associated with utilization of nonmetallic thermal protection system

NASA Technical Reports Server (NTRS)

Wilkinson, W. H.; Kirkhart, F. P.; Kistler, C. W.; Duckworth, W. H.; Ungar, E. W.; Foster, E. L.

1970-01-01

Technical problems of design and flight qualification of the proposed classes of surface insulation materials and leading edge materials were reviewed. A screening test plan, a preliminary design data test plan and a design data test plan were outlined. This program defined the apparent critical differences between the surface insulators and the leading edge materials, structuring specialized screening test plans for each of these two classes of materials. Unique testing techniques were shown to be important in evaluating the structural interaction aspects of the surface insulators and a separate task was defined to validate the test plan. In addition, a compilation was made of available information on proposed material (including metallic TPS), previous shuttle programs, pertinent test procedures, and other national programs of merit. This material was collected and summarized in an informally structured workbook.

Computational Screening of 2D Materials for Photocatalysis.

PubMed

Singh, Arunima K; Mathew, Kiran; Zhuang, Houlong L; Hennig, Richard G

2015-03-19

Two-dimensional (2D) materials exhibit a range of extraordinary electronic, optical, and mechanical properties different from their bulk counterparts with potential applications for 2D materials emerging in energy storage and conversion technologies. In this Perspective, we summarize the recent developments in the field of solar water splitting using 2D materials and review a computational screening approach to rapidly and efficiently discover more 2D materials that possess properties suitable for solar water splitting. Computational tools based on density-functional theory can predict the intrinsic properties of potential photocatalyst such as their electronic properties, optical absorbance, and solubility in aqueous solutions. Computational tools enable the exploration of possible routes to enhance the photocatalytic activity of 2D materials by use of mechanical strain, bias potential, doping, and pH. We discuss future research directions and needed method developments for the computational design and optimization of 2D materials for photocatalysis.

Brownian dynamics simulations of polyelectrolyte adsorption in shear flow with hydrodynamic interaction

NASA Astrophysics Data System (ADS)

Hoda, Nazish; Kumar, Satish

2007-12-01

The adsorption of single polyelectrolyte molecules in shear flow is studied using Brownian dynamics simulations with hydrodynamic interaction (HI). Simulations are performed with bead-rod and bead-spring chains, and electrostatic interactions are incorporated through a screened Coulombic potential with excluded volume accounted for by the repulsive part of a Lennard-Jones potential. A correction to the Rotne-Prager-Yamakawa tensor is derived that accounts for the presence of a planar wall. The simulations show that migration away from an uncharged wall, which is due to bead-wall HI, is enhanced by increases in the strength of flow and intrachain electrostatic repulsion, consistent with kinetic theory predictions. When the wall and polyelectrolyte are oppositely charged, chain behavior depends on the strength of electrostatic screening. For strong screening, chains get depleted from a region close to the wall and the thickness of this depletion layer scales as N1/3Wi2/3 at high Wi, where N is the chain length and Wi is the Weissenberg number. At intermediate screening, bead-wall electrostatic attraction competes with bead-wall HI, and it is found that there is a critical Weissenberg number for desorption which scales as N-1/2κ-3(lB∣σq∣)3/2, where κ is the inverse screening length, lB is the Bjerrum length, σ is the surface charge density, and q is the bead charge. When the screening is weak, adsorbed chains are observed to align in the vorticity direction at low shear rates due to the effects of repulsive intramolecular interactions. At higher shear rates, the chains align in the flow direction. The simulation method and results of this work are expected to be useful for a number of applications in biophysics and materials science in which polyelectrolyte adsorption plays a key role.

48 CFR 45.602-3 - Screening.

Code of Federal Regulations, 2010 CFR

2010-10-01

... electronic equivalent to GSA (see 41 CFR 102-36.215). (2) Twenty-first through forty-sixth day (21 days... materials, hazardous wastes, and classified items. These items shall be screened in accordance with agency...

Novel Approaches to Spectral Properties of Correlated Electron Materials: From Generalized Kohn-Sham Theory to Screened Exchange Dynamical Mean Field Theory

NASA Astrophysics Data System (ADS)

Delange, Pascal; Backes, Steffen; van Roekeghem, Ambroise; Pourovskii, Leonid; Jiang, Hong; Biermann, Silke

2018-04-01

The most intriguing properties of emergent materials are typically consequences of highly correlated quantum states of their electronic degrees of freedom. Describing those materials from first principles remains a challenge for modern condensed matter theory. Here, we review, apply and discuss novel approaches to spectral properties of correlated electron materials, assessing current day predictive capabilities of electronic structure calculations. In particular, we focus on the recent Screened Exchange Dynamical Mean-Field Theory scheme and its relation to generalized Kohn-Sham Theory. These concepts are illustrated on the transition metal pnictide BaCo2As2 and elemental zinc and cadmium.

Evaluation of some candidate materials for automobile thermal reactors in engine-dynamometer screening tests

NASA Technical Reports Server (NTRS)

Oldrieve, R. E.

1971-01-01

Fourteen materials were evaluated in engine screening tests on full-size thermal reactors for automobile engine pollution control systems. Cyclic test-stand engine operation provided 2 hours at 1040 C and a 20-minute air-cool to 70 C each test cycle. Each reactor material was exposed to 83 cycles in 200 hours of engine testing. On the basis of resistance to oxidation and distortion, the best materials included two ferritic iron alloys (Ge 1541 and Armco 18S/R), several commercial oxidation-resistant coatings on AlSl 651 (19-9 DL), and possibly uncoated AISI 310. The best commercial coatings were Cr-Al, Ni-Cr, and a glass ceramic.

Performance characterization of a combined material identification and screening algorithm

NASA Astrophysics Data System (ADS)

Green, Robert L.; Hargreaves, Michael D.; Gardner, Craig M.

2013-05-01

Portable analytical devices based on a gamut of technologies (Infrared, Raman, X-Ray Fluorescence, Mass Spectrometry, etc.) are now widely available. These tools have seen increasing adoption for field-based assessment by diverse users including military, emergency response, and law enforcement. Frequently, end-users of portable devices are non-scientists who rely on embedded software and the associated algorithms to convert collected data into actionable information. Two classes of problems commonly encountered in field applications are identification and screening. Identification algorithms are designed to scour a library of known materials and determine whether the unknown measurement is consistent with a stored response (or combination of stored responses). Such algorithms can be used to identify a material from many thousands of possible candidates. Screening algorithms evaluate whether at least a subset of features in an unknown measurement correspond to one or more specific substances of interest and are typically configured to detect from a small list potential target analytes. Thus, screening algorithms are much less broadly applicable than identification algorithms; however, they typically provide higher detection rates which makes them attractive for specific applications such as chemical warfare agent or narcotics detection. This paper will present an overview and performance characterization of a combined identification/screening algorithm that has recently been developed. It will be shown that the combined algorithm provides enhanced detection capability more typical of screening algorithms while maintaining a broad identification capability. Additionally, we will highlight how this approach can enable users to incorporate situational awareness during a response.

Toward the development of a rational scale in the use of human-figure drawings as a kindergarten screening measure.

PubMed

Goldman, R K; Velasco, M M

1980-04-01

The Draw-A-Person Test was individually administered to 120 kindergartners from diverse socioeconomic backgrounds, ranging in age from 4 yr. and 10 mo. to 6 yr. and 4 mo. This study was conducted to validate and expand Goldman and Warren's earlier work (1976) on the development of a rational scale for use as a kindergarten screening measure. Correlational analyses corroborate the earlier findings that body-part omissions are the most predictive items of emotional high risk. Factor analyses of the current data also replicate earlier findings in which two underlying cohesive factors emerged. The first factor has high loadings on peripheral body-part omissions; the second factor has high loadings on central body-part omission. The results suggest that an interchangeable number of body-part omissions together, rather than any one item, predict high emotional risk. Structural and content characteristics do not contribute significantly to the development of a kindergarten screening measure.

Screening for colorectal cancer.

PubMed

Ross, C C

1988-12-01

Efforts to decrease the number of deaths from colorectal cancer have focused on screening techniques, since no etiologic agent has been identified. Current screening regimens are designed to detect colorectal cancer in a large population in a cost-efficient manner and to minimize the risks associated with work-ups for false-positive tests. A two-part screening questionnaire for colorectal cancer helps identify patients who are at moderate risk for this cancer.

Optical absorption in disordered monolayer molybdenum disulfide

NASA Astrophysics Data System (ADS)

Ekuma, C. E.; Gunlycke, D.

2018-05-01

We explore the combined impact of sulfur vacancies and electronic interactions on the optical properties of monolayer MoS2. First, we present a generalized Anderson-Hubbard Hamiltonian that accounts for both randomly distributed sulfur vacancies and the presence of dielectric screening within the material. Second, we parametrize this energy-dependent Hamiltonian from first-principles calculations based on density functional theory and the Green's function and screened Coulomb (GW) method. Third, we apply a first-principles-based many-body typical medium method to determine the single-particle electronic structure. Fourth, we solve the Bethe-Salpeter equation to obtain the charge susceptibility χ with its imaginary part being related to the absorbance A . Our results show that an increased vacancy concentration leads to decreased absorption both in the band continuum and from exciton states within the band gap. We also observe increased absorption below the band-gap threshold and present an expression, which describes Lifshitz tails, in excellent qualitative agreement with our numerical calculations. This latter increased absorption in the 1.0 -2.5 eV range makes defect engineering of potential interest for solar cell applications.

Gender and Sexual Health: Same-Sex Relationships.

PubMed

Conniff, James

2016-10-01

A transformation in legal and cultural attitudes toward same-sex relationships is under way nationwide. As same-sex marriage has become legal, the unique social and medicolegal issues faced by individuals in same-sex relationships are evolving rapidly. National organizations have published recommendations for making clinical environments more inclusive of lesbian, gay, bisexual, and queer (LGBQ) individuals and their families. Medical issues for patients in same-sex relationships include a higher risk of HIV infection for men who have sex with men (a majority of new cases of HIV infection occur within relationships), higher rates of obesity among women who have sex with women, and disproportionately high rates of mental health issues and alcohol and drug use. Screening and prevention strategies for reducing these risks include cancer and infectious disease screening, immunization for human papillomavirus, and preexposure prophylaxis for HIV. More LGBQ individuals are becoming parents. Clinicians can assist patients in this process by being aware of local resources for adoption, assisted reproductive techniques, and parenting. Written permission from the American Academy of Family Physicians is required for reproduction of this material in whole or in part in any form or medium.

Massachusetts Beryllium Screening Program for Former Workers of Wyman-Gordon, Norton Abrasives, and MIT/Nuclear Metals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pepper, L. D.

2008-05-21

The overall objective of this project was to provide medical screening to former workers of Wyman-Gordon Company, Norton Abrasives, and MIT/Nuclear Metals (NMI) in order to prevent and minimize the health impact of diseases caused by site related workplace exposures to beryllium. The program was developed in response to a request by the U.S. Department of Energy (DOE) that had been authorized by Congress in Section 3162 of the 1993 Defense Authorization Act, urging the DOE to carry out a program for the identification and ongoing evaluation of current and former DOE employees who are subjected to significant health risksmore » during such employment." This program, funded by the DOE, was an amendment to the medical surveillance program for former DOE workers at the Nevada Test Site (NTS). This program's scope included workers who had worked for organizations that provided beryllium products or materials to the DOE as part of their nuclear weapons program. These organizations have been identified as Beryllium Vendors.« less

Toxicity Screening of the ToxCast Phase II Chemical Library Using a Zebrafish Developmental Assay (SOT)

EPA Science Inventory

As part of the chemical screening and prioritization research program of the US EPA, the ToxCast Phase II chemicals were assessed using a vertebrate screen for developmental toxicity. Zebrafish embryos (Danio rerio) were exposed in 96-well plates from late-blastula stage (6hr pos...

14 CFR 29.1105 - Induction system screens.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Induction System § 29.1105 Induction system... screen may be in any part of the induction system that is the only passage through which air can reach the engine, unless it can be deiced by heated air; (c) No screen may be deiced by alcohol alone; and...

14 CFR 25.1105 - Induction system screens.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Induction System § 25.1105 Induction system... screen may be in any part of the induction system that is the only passage through which air can reach the engine, unless it can be deiced by heated air; (c) No screen may be deiced by alcohol alone; and...

Direct laser immobilization of photosynthetic material on screen printed electrodes for amperometric biosensor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boutopoulos, Christos; Zergioti, Ioanna; Touloupakis, Eleftherios

This letter demonstrates the direct laser printing of photosynthetic material onto low cost nonfunctionalized screen printed electrodes for the fabrication of photosynthesis-based amperometric biosensors. The high kinetic energy of the transferred material induces direct immobilization of the thylakoids onto the electrodes without the use of linkers. This type of immobilization is able to establish efficient electrochemical contact between proteins and electrode, stabilizing the photosynthetic biomolecule and transporting electrons to the solid state device with high efficiency. The functionality of the laser printed biosensors was evaluated by the detection of a common herbicide such as Linuron.

Evaluation and control of corrosion and encrustation in tube wells of the Indus Plains, West Pakistan

USGS Publications Warehouse

Clarke, Frank Eldridge; Barnes, Ivan

1969-01-01

Seepage from rivers and irrigation canals has contributed to waterlogging and soil salinization problems in much of the Indus Plains of West Pakistan. These problems are being overcome in part by tube-well dewatering and deep leaching of salinized soils. The ground waters described here are anaerobic and some are supersaturated with troublesome minerals such as calcium carbonate (calcite) and iron carbonate (siderite). These waters are moderately corrosive to steel. Some wells contain sulfate-reducing bacteria, which catalyze corrosion, and pH-electrode potential relationships favorable to the solution of iron also are rather common. Corrosion is concentrated in the relatively active (anodic) saw slots of water-well filter pipes (screens), where metal loss is least tolerable. Local changes in chemical properties of the water, because of corrosion, apparently cause deposition of calcium carbonate, iron carbonate, and other minerals which clog the filter pipes. In some places well capacities are seriously reduced in very short periods of time. There appears to be no practicable preventive treatment for corrosion and encrustation in these wells. Even chemical sterilization for bacterial control has yielded poor results. Periodic rehabilitation by down-hole blasting or by other effective mechanical or chemical cleaning methods will prolong well life. It may be possible to repair severely damaged well screens by inserting perforated sleeves of plastic or other inert material. The most promising approach to future, well-field development is to use filter pipes of epoxy-resin-bonded fiber glass, stainless steel, or other inert material which minimizes both corrosion and corrosion-catalyzed encrustation. Fiberglass plastic pipe appears to be the most economically practicable construction material at this time and already is being used with promising results.

Assessment of Lithium-based Battery Electrolytes Developed under the NASA PERS Program

NASA Technical Reports Server (NTRS)

Bennett, William R.; Baldwin, Richard S.

2006-01-01

Recently, NASA formally completed the Polymer Energy Rechargeable System (PERS) Program, which was established in 2000 in collaboration with the Air Force Research Laboratory (AFRL) to support the development of polymer-based, lithium-based cell chemistries and battery technologies to address the next generation of aerospace applications and mission needs. The goal of this program was to ultimately develop an advanced, space-qualified battery technology, which embodied a solid polymer electrolyte (SPE) and complementary components, with improved performance characteristics that would address future aerospace battery requirements. Programmatically, the PERS initiative exploited both interagency collaborations to address common technology and engineering issues and the active participation of academia and private industry. The initial program phases focused on R&D activities to address the critical technical issues and challenges at the cell level. A variety of cell and polymeric electrolyte concepts were pursued as part of the development efforts undertaken at numerous governmental, industrial and academic laboratories. Numerous candidate electrolyte materials were developed, synthesized and optimized for evaluation. Utilizing the component screening facility and the "standardized" test procedures developed at the NASA Glenn Research Center, electrochemical screening and performance evaluations of promising candidate materials were completed. This overview summarizes test results for a variety of candidate electrolyte materials that were developed under the PERS Program. Electrolyte properties are contrasted and compared to the original project goals, and the strengths and weaknesses of the electrolyte chemistries are discussed. Limited cycling data for full-cells using lithium metal and vanadium oxide electrodes are also presented. Based on measured electrolyte properties, the projected performance characteristics and temperature limitations of batteries utilizing the advanced electrolytes and components have been estimated. Limitations for the achievement of practical performance levels are also discussed, as well as needs for future research and development.

PCR technology for screening and quantification of genetically modified organisms (GMOs).

PubMed

Holst-Jensen, Arne; Rønning, Sissel B; Løvseth, Astrid; Berdal, Knut G

2003-04-01

Although PCR technology has obvious limitations, the potentially high degree of sensitivity and specificity explains why it has been the first choice of most analytical laboratories interested in detection of genetically modified (GM) organisms (GMOs) and derived materials. Because the products that laboratories receive for analysis are often processed and refined, the quality and quantity of target analyte (e.g. protein or DNA) frequently challenges the sensitivity of any detection method. Among the currently available methods, PCR methods are generally accepted as the most sensitive and reliable methods for detection of GM-derived material in routine applications. The choice of target sequence motif is the single most important factor controlling the specificity of the PCR method. The target sequence is normally a part of the modified gene construct, for example a promoter, a terminator, a gene, or a junction between two of these elements. However, the elements may originate from wildtype organisms, they may be present in more than one GMO, and their copy number may also vary from one GMO to another. They may even be combined in a similar way in more than one GMO. Thus, the choice of method should fit the purpose. Recent developments include event-specific methods, particularly useful for identification and quantification of GM content. Thresholds for labelling are now in place in many countries including those in the European Union. The success of the labelling schemes is dependent upon the efficiency with which GM-derived material can be detected. We will present an overview of currently available PCR methods for screening and quantification of GM-derived DNA, and discuss their applicability and limitations. In addition, we will discuss some of the major challenges related to determination of the limits of detection (LOD) and quantification (LOQ), and to validation of methods.

On the Use of Accelerated Aging Methods for Screening High Temperature Polymeric Composite Materials

NASA Technical Reports Server (NTRS)

Gates, Thomas S.; Grayson, Michael A.

1999-01-01

A rational approach to the problem of accelerated testing of high temperature polymeric composites is discussed. The methods provided are considered tools useful in the screening of new materials systems for long-term application to extreme environments that include elevated temperature, moisture, oxygen, and mechanical load. The need for reproducible mechanisms, indicator properties, and real-time data are outlined as well as the methodologies for specific aging mechanisms.

Development of a spiritually based educational program to increase colorectal cancer screening among African American men and women.

PubMed

Holt, Cheryl L; Roberts, Chastity; Scarinci, Isabel; Wiley, Shereta R; Eloubeidi, Mohamad; Crowther, Martha; Bolland, John; Litaker, Mark S; Southward, Vivian; Coughlin, Steven S

2009-07-01

This study describes the development of a spiritually based intervention to increase colorectal cancer screening through African American churches by framing the health message with spiritual themes and scripture. The intervention development phase consisted of ideas from an advisory panel and core content identified in focus groups. In the pilot-testing phase, prototypes of the intervention materials were tested for graphic appeal in additional focus groups, and content was tested for acceptability and comprehension in cognitive interviews. Participants preferred materials showing a variety of African Americans in real settings, bright color schemes, and an uplifting message emphasizing prevention and early detection. Spiritual themes such as stewardship over the body, being well to serve God, and using faith to overcome fear, were well received. The materials were then finalized for implementation and will be used by community health advisors to encourage screening.

Stabilization of glucose-oxidase in the graphene paste for screen-printed glucose biosensor

NASA Astrophysics Data System (ADS)

Pepłowski, Andrzej; Janczak, Daniel; Jakubowska, Małgorzata

2015-09-01

Various methods and materials for enzyme stabilization within screen-printed graphene sensor were analyzed. Main goal was to develop technology allowing immediate printing of the biosensors in single printing process. Factors being considered were: toxicity of the materials used, ability of the material to be screen-printed (squeezed through the printing mesh) and temperatures required in the fabrication process. Performance of the examined sensors was measured using chemical amperometry method, then appropriate analysis of the measurements was conducted. The analysis results were then compared with the medical requirements. Parameters calculated were: correlation coefficient between concentration of the analyte and the measured electrical current (0.986) and variation coefficient for the particular concentrations of the analyte used as the calibration points. Variation of the measured values was significant only in ranges close to 0, decreasing for the concentrations of clinical importance. These outcomes justify further development of the graphene-based biosensors fabricated through printing techniques.

Computer-Aided Screening of Conjugated Polymers for Organic Solar Cell: Classification by Random Forest.

PubMed

Nagasawa, Shinji; Al-Naamani, Eman; Saeki, Akinori

2018-05-17

Owing to the diverse chemical structures, organic photovoltaic (OPV) applications with a bulk heterojunction framework have greatly evolved over the last two decades, which has produced numerous organic semiconductors exhibiting improved power conversion efficiencies (PCEs). Despite the recent fast progress in materials informatics and data science, data-driven molecular design of OPV materials remains challenging. We report a screening of conjugated molecules for polymer-fullerene OPV applications by supervised learning methods (artificial neural network (ANN) and random forest (RF)). Approximately 1000 experimental parameters including PCE, molecular weight, and electronic properties are manually collected from the literature and subjected to machine learning with digitized chemical structures. Contrary to the low correlation coefficient in ANN, RF yields an acceptable accuracy, which is twice that of random classification. We demonstrate the application of RF screening for the design, synthesis, and characterization of a conjugated polymer, which facilitates a rapid development of optoelectronic materials.

Use of National Comprehensive Cancer Network and Other Guidelines and Biomarkers for Colorectal Cancer Screening

PubMed Central

Williams, Christina D.; Grady, William M.; Zullig, Leah L.

2016-01-01

Colorectal cancer (CRC) remains a common cancer and significant public health burden. CRC-related mortality is declining, in part due to the early detection of CRC through robust screening. The National Comprehensive Cancer Network (NCCN) has established CRC screening guidelines to aid healthcare providers in making appropriate recommendations for screening according to a patient’s risk of developing CRC. The purpose of this review is to describe the evolution of CRC screening guidelines for average risk individuals, discuss the role of NCCN CRC screening guidelines in cancer prevention, and comment on the current and emerging use of biomarkers for CRC screening. PMID:27799515

Use of NCCN Guidelines, Other Guidelines, and Biomarkers for Colorectal Cancer Screening.

PubMed

Williams, Christina D; Grady, William M; Zullig, Leah L

2016-11-01

Colorectal cancer (CRC) remains a common cancer and significant public health burden. CRC-related mortality is declining, partly due to the early detection of CRC through robust screening. NCCN has established the NCCN Guidelines for CRC Screening to help healthcare providers make appropriate screening recommendations according to the patient's risk of developing CRC. This review describes the evolution of CRC screening guidelines for average-risk individuals, discusses the role of NCCN Guidelines for CRC Screening in cancer prevention, and comments on the current and emerging use of biomarkers for CRC screening. Copyright © 2016 by the National Comprehensive Cancer Network.

Meniscus Membranes For Separation

DOEpatents

Dye, Robert C.; Jorgensen, Betty; Pesiri, David R.

2005-09-20

Gas separation membranes, especially meniscus-shaped membranes for gas separations are disclosed together with the use of such meniscus-shaped membranes for applications such as thermal gas valves, pre-concentration of a gas stream, and selective pre-screening of a gas stream. In addition, a rapid screening system for simultaneously screening polymer materials for effectiveness in gas separation is provided.

Photonic crystal materials and their application in biomedicine.

PubMed

Chen, Huadong; Lou, Rong; Chen, Yanxiao; Chen, Lili; Lu, Jingya; Dong, Qianqian

2017-11-01

Photonic crystal (PC) materials exhibit unique structural colors that originate from their intrinsic photonic band gap. Because of their highly ordered structure and distinct optical characteristics, PC-based biomaterials have advantages in the multiplex detection, biomolecular screening and real-time monitoring of biomolecules. In addition, PCs provide good platforms for drug loading and biomolecule modification, which could be applied to biosensors and biological carriers. A number of methods are now available to fabricate PC materials with variable structure colors, which could be applied in biomedicine. Emphasis is given to the description of various applications of PC materials in biomedicine, including drug delivery, biodetection and tumor screening. We believe that this article will promote greater communication among researchers in the fields of chemistry, material science, biology, medicine and pharmacy.

Searching for “Defect-Tolerant” Photovoltaic Materials: Combined Theoretical and Experimental Screening

DOE PAGES

Brandt, Riley E.; Poindexter, Jeremy R.; Gorai, Prashun; ...

2017-05-09

Recently, we and others have proposed screening criteria for 'defect-tolerant' photovoltaic (PV) absorbers, identifying several classes of semiconducting compounds with electronic structures similar to those of hybrid lead-halide perovskites. In this work, we reflect on the accuracy and prospects of these new design criteria through a combined experimental and theoretical approach. We construct a model to extract photoluminescence lifetimes of six of these candidate PV absorbers, including four (InI, SbSI, SbSeI, and BiOI) for which time-resolved photoluminescence has not been previously reported. The lifetimes of all six candidate materials exceed 1 ns, a threshold for promising early stage PV devicemore » performance. However, there are variations between these materials, and none achieve lifetimes as high as those of the hybrid lead-halide perovskites, suggesting that the heuristics for defect-tolerant semiconductors are incomplete. Here, we explore this through first-principles point defect calculations and Shockley-Read-Hall recombination models to describe the variation between the measured materials. In light of these insights, we discuss the evolution of screening criteria for defect tolerance and high-performance PV materials.« less

Asymmetry in band widening and quasiparticle lifetimes in SrVO3: Competition between screened exchange and local correlations from combined G W and dynamical mean-field theory G W + DMFT

NASA Astrophysics Data System (ADS)

Tomczak, Jan M.; Casula, M.; Miyake, T.; Biermann, S.

2014-10-01

The very first dynamical implementation of the combined GW and dynamical mean-field scheme "G W + DMFT " for a real material was achieved recently [Tomczak et al., Europhys. Lett. 100, 67001 (2012), 10.1209/0295-5075/100/67001], and applied to the ternary transition metal oxide SrVO3. Here, we review and extend that work, giving not only a detailed account of full G W + DMFT calculations, but also discussing and testing simplified approximate schemes. We give insights into the nature of exchange and correlation effects: dynamical renormalizations in the Fermi liquid regime of SrVO3 are essentially local, and nonlocal correlations mainly act to screen the Fock exchange term. The latter substantially widens the quasiparticle band structure, while the band narrowing induced by the former is accompanied by a spectral weight transfer to higher energies. Most interestingly, the exchange broadening is more pronounced in the unoccupied part of the spectrum than in the occupied one. In addition, shorter lifetimes for unoccupied states further contribute to making the corrections to the Kohn-Sham band structure asymmetric with respect to the chemical potential. As a result, the G W + DMFT electronic structure of SrVO3 resembles the conventional density functional based dynamical mean-field (DFT + DMFT ) description for occupied states but is profoundly modified in the empty part. Our work leads to a reinterpretation of inverse photoemission spectroscopy (IPES) data. Indeed, we assign a prominent peak at about 2.7 eV dominantly to eg states, rather than to an upper Hubbard band of t2 g character. Similar surprises can be expected for other transition metal oxides. This prediction urgently calls for more detailed investigations of conduction band states in correlated materials.

Light quality characterization under climate screens and shade nets for controlled-environment agriculture.

PubMed

Kotilainen, Titta; Robson, T Matthew; Hernández, Ricardo

2018-01-01

Climate screens are typically used inside glass greenhouses to improve control of humidity and temperature, and thus reduce energy expenditure. Shade nets are more appropriate to use, either with or without polyethylene cladding, at locations less-reliant on climate control, but where protection against hail, wind and excessive solar radiation might be needed. In addition, insect screens and nets can be employed to hinder insect pests and other invertebrates entering either type of production environment, and to keep invertebrates used in pest management contained inside. Screens and nets both transmit sunlight in a wavelength-specific manner, giving them the potential to affect plant morphology and physiology. Screens and nets of various colours and nominal shading factors have been described and studied; however, detailed measurements of their spectral characteristics are scarce. We measured solar spectral photon-irradiance and its attenuation by climate screens, shade nets, insect nets, greenhouse glass, and polyethylene covers. Our aim was to elucidate the effects of different patterns, colours, and shading factors, on light quality in production environments. Our measurements reveal that there are large differences both in the fraction of global irradiance attenuated and spectral ratios received under materials that are otherwise superficially similar in terms of their appearance and texture. We suggest that the type of spectral characterization that we performed is required to fully interpret the results of research examining plant responses to different types of screen and net. These data on spectral irradiance would benefit material manufacturers, researchers, growers, and horticultural consultants, enabling material selection to better match the solutions sought by growers and their desired outcomes regarding plant performance.

Immobilized enzyme reactors in HPLC and its application in inhibitor screening: A review

PubMed Central

Fang, Si-Meng; Wang, Hai-Na; Zhao, Zhong-Xi; Wang, Wei-Hong

2011-01-01

This paper sets out to summarize the literatures based on immobilized enzyme bio-chromatography and its application in inhibitors screening in the last decade. In order to screen enzyme inhibitors from a mass of compounds in preliminary screening, multi-pore materials with good biocompatibility are used for the supports of immobilizing enzymes, and then the immobilized enzyme reactor applied as the immobilized enzyme stationary phase in HPLC. Therefore, a technology platform of high throughput screening is gradually established to screen the enzyme inhibitors as new anti-tumor drugs. Here, we briefly summarize the selective methods of supports, immobilization techniques, co-immobilized enzymes system and the screening model. PMID:29403726

Microfluidic Synthesis of Composite Cross-Gradient Materials for Investigating Cell–Biomaterial Interactions

PubMed Central

He, Jiankang; Du, Yanan; Guo, Yuqi; Hancock, Matthew J.; Wang, Ben; Shin, Hyeongho; Wu, Jinhui; Li, Dichen; Khademhosseini, Ali

2010-01-01

Combinatorial material synthesis is a powerful approach for creating composite material libraries for the high-throughput screening of cell–material interactions. Although current combinatorial screening platforms have been tremendously successful in identifying target (termed “hit”) materials from composite material libraries, new material synthesis approaches are needed to further optimize the concentrations and blending ratios of the component materials. Here we employed a microfluidic platform to rapidly synthesize composite materials containing cross-gradients of gelatin and chitosan for investigating cell–biomaterial interactions. The microfluidic synthesis of the cross-gradient was optimized experimentally and theoretically to produce quantitatively controllable variations in the concentrations and blending ratios of the two components. The anisotropic chemical compositions of the gelatin/chitosan cross-gradients were characterized by Fourier transform infrared spectrometry and X-ray photoelectron spectrometry. The three-dimensional (3D) porous gelatin/chitosan cross-gradient materials were shown to regulate the cellular morphology and proliferation of smooth muscle cells (SMCs) in a gradient-dependent manner. We envision that our microfluidic cross-gradient platform may accelerate the material development processes involved in a wide range of biomedical applications. PMID:20721897

Developing English and Spanish television public service announcements to promote colorectal cancer screening.

PubMed

Cooper, Crystale Purvis; Gelb, Cynthia A; Jameson, Heather; Macario, Everly; Jorgensen, Cynthia M; Seeff, Laura

2005-10-01

Screen for Life: National Colorectal Cancer Action Campaign (SFL) is a federally funded campaign to promote understanding of colorectal cancer and the importance of regular screening for adults aged 50 years and older. SFL uses a variety of communication strategies, including television public service announcements (PSAs). SFL materials are developed using the Health Communication Process endorsed by the U.S. Department of Health and Human Services, which has four stages: (a) planning and strategy development; (b) developing and pretesting concepts, messages, and materials; (c) implementing the program; and (d) assessing effectiveness and making refinements. This article describes SFL's application of this process to develop television PSAs in English and Spanish.

US screening of international travelers for radioactive contamination after the Japanese nuclear plant disaster in March 2011.

PubMed

Wilson, Todd; Chang, Arthur; Berro, Andre; Still, Aaron; Brown, Clive; Demma, Andrew; Nemhauser, Jeffrey; Martin, Colleen; Salame-Alfie, Adela; Fisher-Tyler, Frieda; Smith, Lee; Grady-Erickson, Onalee; Alvarado-Ramy, Francisco; Brunette, Gary; Ansari, Armin; McAdam, David; Marano, Nina

2012-10-01

On March 11, 2011, a magnitude 9.0 earthquake and subsequent tsunami damaged nuclear reactors at the Fukushima Daiichi complex in Japan, resulting in radionuclide release. In response, US officials augmented existing radiological screening at its ports of entry (POEs) to detect and decontaminate travelers contaminated with radioactive materials. During March 12 to 16, radiation screening protocols detected 3 travelers from Japan with external radioactive material contamination at 2 air POEs. Beginning March 23, federal officials collaborated with state and local public health and radiation control authorities to enhance screening and decontamination protocols at POEs. Approximately 543 000 (99%) travelers arriving directly from Japan at 25 US airports were screened for radiation contamination from March 17 to April 30, and no traveler was detected with contamination sufficient to require a large-scale public health response. The response highlighted synergistic collaboration across government levels and leveraged screening methods already in place at POEs, leading to rapid protocol implementation. Policy development, planning, training, and exercising response protocols and the establishment of federal authority to compel decontamination of travelers are needed for future radiological responses. Comparison of resource-intensive screening costs with the public health yield should guide policy decisions, given the historically low frequency of contaminated travelers arriving during radiological disasters.

Validation of Microtox as a first screening tool for waste classification.

PubMed

Weltens, R; Deprez, K; Michiels, L

2014-12-01

The Waste Framework Directive (WFD; 2008/98/EG) describes how waste materials are to be classified as hazardous or not. For complex waste materials chemical analyses are often not conclusive and the WFD provides the possibility to assess the hazardous properties by testing on the waste materials directly. As a methodology WFD refers to the protocols described in the CLP regulation (regulation on Classification, Labeling and Packaging of chemicals) but the toxicity tests on mammals are not acceptable for waste materials. The DISCRISET project was initiated to investigate the suitability of alternative toxicity tests that are already in use in pharmaceutical applications, for the toxicological hazard assessment of complex waste materials. Results indicated that Microtox was a good candidate as a first screening test in a tiered approached hazard assessment. This is now further validated in the present study. The toxic responses measured in Microtox were compared to biological responses in other bioassays for both organic and inorganic fractions of the wastes. Both fractions contribute to the toxic load of waste samples. Results show that the Microtox test is indeed a good and practical screening tool for the organic fraction. A screening threshold (ST) of 5 geq/l as the EC50 value in Microtox is proposed as this ST allows to recognize highly toxic samples in the screening test. The data presented here show that the Microtox toxicity response at this ST is not only predictive for acute toxicity in other organisms but also for sub lethal toxic effects of the organic fraction. This limit value has to be further validated. For the inorganic fraction no specific biotest can be recommended as a screening test, but the use of direct toxicity assessment is also preferable for this fraction as metal speciation is an important issue to define the toxic load of elutriate fractions. A battery of 3 tests (Microtox, Daphnia and Algae) for direct toxicity assessment of this fraction is recommended in literature, but including tests for mechanistic toxicity might be useful. Copyright © 2014 Elsevier Ltd. All rights reserved.

Rare earth phosphors and phosphor screens

DOEpatents

Buchanan, Robert A.; Maple, T. Grant; Sklensky, Alden F.

1981-01-01

This invention relates to rare earth phosphor screens for converting image carrying incident radiation to image carrying visible or near-visible radiation and to the rare earth phosphor materials utilized in such screens. The invention further relates to methods for converting image carrying charged particles to image carrying radiation principally in the blue and near-ultraviolet region of the spectrum and to stabilized rare earth phosphors characterized by having a continuous surface layer of the phosphors of the invention. More particularly, the phosphors of the invention are oxychlorides and oxybromides of yttrium, lanthanum and gadolinium activated with trivalent cerium and the conversion screens are of the type illustratively including x-ray conversion screens, image amplifier tube screens, neutron imaging screens, cathode ray tube screens, high energy gamma ray screens, scintillation detector screens and screens for real-time translation of image carrying high energy radiation to image carrying visible or near-visible radiation.

Pesticide Program Dialogue Committee - June 5-6, 2014 Materials

EPA Pesticide Factsheets

This PPDC meeting included sessions on the budget, 21st century toxicity testing, polllinator protection, school IPM, and the endocrine disruptor screening program. View presentation materials for those topics plus other background materials and updates.

The Harvard Clean Energy Project: High-throughput screening of organic photovoltaic materials using cheminformatics, machine learning, and pattern recognition

NASA Astrophysics Data System (ADS)

Olivares-Amaya, Roberto; Hachmann, Johannes; Amador-Bedolla, Carlos; Daly, Aidan; Jinich, Adrian; Atahan-Evrenk, Sule; Boixo, Sergio; Aspuru-Guzik, Alán

2012-02-01

Organic photovoltaic devices have emerged as competitors to silicon-based solar cells, currently reaching efficiencies of over 9% and offering desirable properties for manufacturing and installation. We study conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices with a molecular library motivated by experimental feasibility. We use quantum mechanics and a distributed computing approach to explore this vast molecular space. We will detail the screening approach starting from the generation of the molecular library, which can be easily extended to other kinds of molecular systems. We will describe the screening method for these materials which ranges from descriptor models, ubiquitous in the drug discovery community, to eventually reaching first principles quantum chemistry methods. We will present results on the statistical analysis, based principally on machine learning, specifically partial least squares and Gaussian processes. Alongside, clustering methods and the use of the hypergeometric distribution reveal moieties important for the donor materials and allow us to quantify structure-property relationships. These efforts enable us to accelerate materials discovery in organic photovoltaics through our collaboration with experimental groups.

Contactor/filter improvements

DOEpatents

Stelman, D.

1988-06-30

A contactor/filter arrangement for removing particulate contaminants from a gaseous stream is described. The filter includes a housing having a substantially vertically oriented granular material retention member with upstream and downstream faces, a substantially vertically oriented microporous gas filter element, wherein the retention member and the filter element are spaced apart to provide a zone for the passage of granular material therethrough. A gaseous stream containing particulate contaminants passes through the gas inlet means as well as through the upstream face of the granular material retention member, passing through the retention member, the body of granular material, the microporous gas filter element, exiting out of the gas outlet means. A cover screen isolates the filter element from contact with the moving granular bed. In one embodiment, the granular material is comprised of porous alumina impregnated with CuO, with the cover screen cleaned by the action of the moving granular material as well as by backflow pressure pulses. 6 figs.

The Art and Science of Color in Multimedia Screen Design, Part 1: Art, Opinion, and Tradition.

ERIC Educational Resources Information Center

Schwier, Richard A.; Misanchuk, Earl R.

This article discusses psychophysical aspects of color perception and critically examines the advice on color use in screen design found in non-empirical literature. There are four main characteristics of color: hue, brightness, saturation, and contrast. In multimedia screen design, color can be used to link logically-related data; differentiate…

An Examination of the Psychometric Properties of the Pediatric Symptom Checklist with Children Enrolled in Medicaid

ERIC Educational Resources Information Center

Boothroyd, Roger Alan; Armstrong, Mary

2010-01-01

The federal Early and Periodic Screening, Diagnosis, and Treatment (EPSDT) program requires mental health screening of Medicaid-eligible children as part of primary care medical assessments. However, decisions related to selection of a screening tool remain with the states. States need access to brief, cost effective, easily administered screening…

ROC and Loss Function Analysis in Sequential Testing

ERIC Educational Resources Information Center

Muijtjens, Arno M. M.; Van Luijk, Scheltus J.; Van Der Vleuten, Cees P. M.

2006-01-01

Sequential testing is applied to reduce costs in SP-based tests (OSCEs). Initially, all candidates take a screening test consisting of a part of the OSCE. Candidates who fail the screen sit the complete test, whereas those who pass the screen are qualified as a pass of the complete test. The procedure may result in a reduction of testing…

Cost-Effectiveness Comparison of Breast Cancer Screening and Vascular Event Primary Prevention with Aspirin in Wales

ERIC Educational Resources Information Center

Morgan, Gareth

2011-01-01

Aim: For the first time, this article presents a cost-effectiveness comparison of a breast cancer screening programme with a possible health education programme with aspirin for vascular event primary prevention. Background: Breast cancer screening is a well established part of cancer control programmes yet recent evidence on this intervention has…

Pilot trial on separation conditions for diaper recycling.

PubMed

Kim, Kyung-Shin; Cho, Hee-Sun

2017-09-01

By utilizing laboratory-scale tests, the optimal separation conditions for diaper recycling were identified, and then, these conditions were validated by a pilot trial. In this research, we determined the mass balances derived during various processing steps and identified the most feasible procedures to use for separating each material in the output flow. The results showed that drum screening was not able to remove all the fiber and super absorbent particles (SAP) in the plastic-rich fraction and that cellulose enzyme treatment can be a good solution. To achieve better separation of fibers and SAP, slot screening followed by a cleaner is a potential option. A feasible diaper recycling process was recommended based on these results. This process involves screening and enzymatic treatment for the plastic fraction, and screening, cleaning, and thickening for the fiber fraction. Treatment procedures were also proposed for the SAP fraction and rejected materials. Copyright © 2017. Published by Elsevier Ltd.

Real-time and online screening method for materials emitting volatile organic compounds

NASA Astrophysics Data System (ADS)

Kim, Changhyuk; Sul, Yong Tae; Pui, David Y. H.

2016-09-01

In the semiconductor industry, volatile organic compounds (VOCs) in the cleanroom air work as airborne molecular contamination, which reduce the production yield of semiconductor chips by forming nanoparticles and haze on silicon wafers and photomasks under ultraviolet irradiation during photolithography processes. Even though VOCs in outdoor air are removed by gas filters, VOCs can be emitted from many kinds of materials used in cleanrooms, such as organic solvents and construction materials (e.g., adhesives, flame retardants and sealants), threatening the production of semiconductors. Therefore, finding new replacements that emit lower VOCs is now essential in the semiconductor industry. In this study, we developed a real-time and online method to screen materials for developing the replacements by converting VOCs into nanoparticles under soft X-ray irradiation. This screening method was applied to measure VOCs emitted from different kinds of organic solvents and adhesives. Our results showed good repeatability and high sensitivity for VOCs, which come from aromatic compounds, some alcohols and all tested adhesives (Super glue and cleanroom-use adhesives). In addition, the overall trend of measured VOCs from cleanroom-use adhesives was well matched with those measured by a commercial thermal desorption-gas chromatography-mass spectrometry, which is a widely used off-line method for analyzing VOCs. Based on the results, this screening method can help accelerate the developing process for reducing VOCs in cleanrooms.

Evaluation of 10V Chip Polymer Tantalum Capacitors for Space Applications

NASA Technical Reports Server (NTRS)

Teverovsky, Alexander A.

2016-01-01

Due to low ESR and safe failure mode, new technology chip polymer tantalum capacitors (CPTC) have gained popularity in the electronics design community, first in commercial applications, and now in hi-rel and space systems. The major drawbacks of these parts are high leakage currents, degradation under environmental stresses, and a relatively narrow temperature range of operating and storage conditions. Several studies have shown that a certain amount of moisture in polymer cathodes is necessary for a normal operation of the parts. This might limit applications of CPTCs in space systems and requires analysis of long-term exposure to deep vacuum conditions on their performance and reliability. High leakage currents and limited maximum operational temperature complicate accelerated testing that is necessary to assess long-term reliability and require new screening and qualification procedures for quality assurance. A better understanding of behavior of CPTCs as compared to traditional, MnO2, capacitors is necessary to develop adequate approaches for QA system for space applications. A specific of CPTCs is that different materials and processes might be used for low-voltage (10 V and less) and high-voltage (above 10 V) capacitors, so performance and degradation processes in these groups require separate analysis. In this work, that is a part of the NASA Electronic Parts and Packaging (NEPP) program, degradation of AC and DC characteristics under environmental stresses at different temperatures and voltages have been studied in nine lots of commercial and automotive grade capacitors rated to 10 V. Results of analysis of leakage currents, high temperature storage (HTS) up to 5000 hrs in vacuum and air at different temperatures, and Highly Accelerated Life Testing (HALT) in the range from 85 C to 145 C are presented. Temperature and voltage acceleration factors were calculated based on approximation of distributions of degradation rates with a general log-linear Weibull model. Mechanisms of degradation and failures, and requirements for screening and qualification testing are discussed.

Chemiluminescence as a condition monitoring method for thermal aging and lifetime prediction of an HTPB elastomer.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gillen, Kenneth Todd; Minier, Leanna M. G.; Celina, Mathias C.

Chemiluminescence (CL) has been applied as a condition monitoring technique to assess aging related changes in a hydroxyl-terminated-polybutadiene based polyurethane elastomer. Initial thermal aging of this polymer was conducted between 110 and 50 C. Two CL methods were applied to examine the degradative changes that had occurred in these aged samples: isothermal 'wear-out' experiments under oxygen yielding initial CL intensity and 'wear-out' time data, and temperature ramp experiments under inert conditions as a measure of previously accumulated hydroperoxides or other reactive species. The sensitivities of these CL features to prior aging exposure of the polymer were evaluated on the basismore » of qualifying this method as a quick screening technique for quantification of degradation levels. Both the techniques yielded data representing the aging trends in this material via correlation with mechanical property changes. Initial CL rates from the isothermal experiments are the most sensitive and suitable approach for documenting material changes during the early part of thermal aging.« less

Glass formability in medium-sized molecular systems/pharmaceuticals. I. Thermodynamics vs. kinetics.

PubMed

Tu, Wenkang; Li, Xiangqian; Chen, Zeming; Liu, Ying Dan; Labardi, Massimiliano; Capaccioli, Simone; Paluch, M; Wang, Li-Min

2016-05-07

Scrutinizing critical thermodynamic and kinetic factors for glass formation and the glass stability of materials would benefit the screening of the glass formers for the industry of glassy materials. The present work aims at elucidating the factors that contribute to the glass formation by investigating medium-sized molecules of pharmaceuticals. Glass transition related thermodynamics and kinetics are performed on the pharmaceuticals using calorimetric, dielectric, and viscosity measurements. The characteristic thermodynamic and kinetic parameters of glass transition are found to reproduce the relations established for small-molecule glass formers. The systematic comparison of the thermodynamic and kinetic contributions to glass formation reveals that the melting-point viscosity is the crucial quantity for the glass formation. Of more interest is the finding of a rough correlation between the melting-point viscosity and the entropy of fusion normalized by the number of beads of the pharmaceuticals, suggesting the thermodynamics can partly manifest its contribution to glass formation via kinetics.

Glass formability in medium-sized molecular systems/pharmaceuticals. I. Thermodynamics vs. kinetics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tu, Wenkang; Li, Xiangqian; Chen, Zeming

Scrutinizing critical thermodynamic and kinetic factors for glass formation and the glass stability of materials would benefit the screening of the glass formers for the industry of glassy materials. The present work aims at elucidating the factors that contribute to the glass formation by investigating medium-sized molecules of pharmaceuticals. Glass transition related thermodynamics and kinetics are performed on the pharmaceuticals using calorimetric, dielectric, and viscosity measurements. The characteristic thermodynamic and kinetic parameters of glass transition are found to reproduce the relations established for small-molecule glass formers. The systematic comparison of the thermodynamic and kinetic contributions to glass formation reveals thatmore » the melting-point viscosity is the crucial quantity for the glass formation. Of more interest is the finding of a rough correlation between the melting-point viscosity and the entropy of fusion normalized by the number of beads of the pharmaceuticals, suggesting the thermodynamics can partly manifest its contribution to glass formation via kinetics.« less

Parameter Identification Of Multilayer Thermal Insulation By Inverse Problems

NASA Astrophysics Data System (ADS)

Nenarokomov, Aleksey V.; Alifanov, Oleg M.; Gonzalez, Vivaldo M.

2012-07-01

The purpose of this paper is to introduce an iterative regularization method in the research of radiative and thermal properties of materials with further applications in the design of Thermal Control Systems (TCS) of spacecrafts. In this paper the radiative and thermal properties (heat capacity, emissivity and thermal conductance) of a multilayered thermal-insulating blanket (MLI), which is a screen-vacuum thermal insulation as a part of the (TCS) for perspective spacecrafts, are estimated. Properties of the materials under study are determined in the result of temperature and heat flux measurement data processing based on the solution of the Inverse Heat Transfer Problem (IHTP) technique. Given are physical and mathematical models of heat transfer processes in a specimen of the multilayered thermal-insulating blanket located in the experimental facility. A mathematical formulation of the IHTP, based on sensitivity function approach, is presented too. The practical testing was performed for specimen of the real MLI. This paper consists of recent researches, which developed the approach suggested at [1].

An infrared search in our solar system as part of a more flexible search strategy

NASA Astrophysics Data System (ADS)

Papagiannis, M. D.

One of several explanations for the Fermi Paradox is that the whole Galaxy, including the solar system, has already been colonized, but that for a variety of reasons the extraterrestrials have chosen not to reveal their presence. IRAS has obtained a large volume of infrared data at 12, 25, 60, and 100 microns from which a special working group at JPL, is trying to establish a special catalog of solar system objects, the vast majority of which are asteroids. A careful search through this data bank for objects with peculiar infrared spectra would be the first step in the search for major artificial objects, such as space stations or materials processing plants, in the solar system. The asteroid belt is an ideal source of raw materials for space colonies, which could have easily escaped detection lost among the many thousands of natural asteroids. Checking them out for excesses in the infrared is an ideal screening test for artificial objects in the solar system.

Screening Technique for Lead and Cadmium in Toys and Other Materials Using Atomic Absorption Spectroscopy

ERIC Educational Resources Information Center

Brouwer, Henry

2005-01-01

A simple procedure to quickly screen different consumer products for the presence of lead, cadmium, and other metals is described. This screening technique avoids expending a lot of preparation time on samples known to contain low levels of hazardous metals where only samples testing positive for the desired elements need to be analyzed…

Burden of cervical cancer and role of screening in India

PubMed Central

Bobdey, Saurabh; Sathwara, Jignasa; Jain, Aanchal; Balasubramaniam, Ganesh

2016-01-01

Background: Cervical cancer is a major cause of cancer mortality in women and more than a quarter of its global burden is contributed by developing countries. In India, in spite of alarmingly high figures, there is no nationwide government-sponsored screening program. This study was conducted to assess the burden of cervical cancer in India and review the performance characteristics of available cervical cancer screening tools, so as to provide evidence-based recommendations for application of most practically suited screening test to be used in resource-poor field settings. Materials and Methods: MEDLINE and Web of Science electronic database were searched from January 1990 to December 2015, using the keywords such as “cervical cancer”, “screening”, “early detection”, “cervical cytology” and “visual inspection”, and their corresponding MeSH terms in combination with Boolean operators “OR, AND.” Two authors independently selected studies that are published in English and conducted in India. A total of 11 studies were found to be relevant and eligible to be included in the present study. Results: In India, cervical cancer contributes to approximately 6–29% of all cancers in women. The age-adjusted incidence rate of cervical cancer varies widely among registries; highest is 23.07/100,000 in Mizoram state and the lowest is 4.91/100,000 in Dibrugarh district. The pooled estimates of sensitivity and specificity of visual inspection with acetic acid (VIA), magnified VIA, visual inspection with Lugol's iodine (VILI), cytology (Pap smear), and human papillomavirus DNA were found to be 67.65% and 84.32%, 65.36% and 85.76%, 78.27% and 87.10%, 62.11% and 93.51%, and 77.81% and 91.54%, respectively. Conclusions: In developing countries because of lack of necessary infrastructure and quality control, high-quality cytology screening may not be feasible for wide-scale implementation. Hence, cervical cancer screening program based on visual screening test such as VIA/VILI should be adopted as an integral part of primary health-care setup in resource-poor countries like India. PMID:28144096

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, H., E-mail: li-huanglong@mail.tsinghua.edu.cn; Gillen, R.; Robertson, J., E-mail: jr214@cam.ac.uk

The screened exchange (sX) hybrid functional has been widely used in computational material science. Although it has widely been studied in bulk systems, less is known about its functional behavior in surface systems which are crucial to many technologies such as materials synthesis and nano-electronic devices. Assessing the screening dependent functional behaviors in the surface systems is therefore important for its application in such systems. In this work, we investigate the screening effects of the sX in CO adsorption on Pt(111) surface. The differences between the sX and Heyd-Scuseria-Ernzerhof (HSE06) hybrid functionals, and the effects of screening parameters are studied.more » The screening has two effects: first, the HOMO-LUMO gap is screening dependent. This affects the site preference most significantly. In this work, atop adsorption of CO/Pt(111) is predicted by the hybrid functionals with screened exchange potential. The sX(1.44) gives the largest HOMO-LUMO gap for the isolated CO molecule. The adsorption energy difference between the atop and fcc site is also the largest by the sX(1.44) which is explained by the reduced metal d states to the CO 2π* state back-donation, with stronger effect for the fcc adsorption than for the atop adsorption; second, the adsorption energy is screening dependent. This can be seen by comparing the sX(2.38) and HSE06 which have different screening strengths. They show similar surface band structures for the CO adsorption but different adsorption energies, which is explained by the stronger CO 5σ state to the metal d states donation or the effectively screened Pauli repulsion. This work underlines the screening strength as a main difference between sX and HSE06, as well as an important hybrid functional parameter for surface calculation.« less

Effect of Patient Navigation on Breast Cancer Screening Among African American Medicare Beneficiaries: A Randomized Controlled Trial.

PubMed

Marshall, Jessie Kimbrough; Mbah, Olive M; Ford, Jean G; Phelan-Emrick, Darcy; Ahmed, Saifuddin; Bone, Lee; Wenzel, Jennifer; Shapiro, Gary R; Howerton, Mollie; Johnson, Lawrence; Brown, Qiana; Ewing, Altovise; Pollack, Craig Evan

2016-01-01

There is growing evidence that patient navigation improves breast cancer screening rates; however, there are limited efficacy studies of its effect among African American older adult women. To evaluate the effect of patient navigation on screening mammography among African American female Medicare beneficiaries in Baltimore, MD. The Cancer Prevention and Treatment Demonstration (CPTD), a multi-site study, was a randomized controlled trial conducted from April 2006 through December 2010. Community-based and clinical setting. The CPTD Screening Trial enrolled 1905 community-dwelling African American female Medicare beneficiaries who were ≥65 years of age and resided in Baltimore, MD. Participants were recruited from health clinics, community centers, health fairs, mailings using Medicare rosters, and phone calls. Participants were randomized to either: printed educational materials on cancer screening (control group) or printed educational materials + patient navigation services designed to help participants overcome barriers to cancer screening (intervention group). Self-reported receipt of mammography screening within 2 years of the end of the study. The median follow-up period for participants in this analysis was 17.8 months. In weighted multivariable logistic regression analyses, women in the intervention group had significantly higher odds of being up to date on mammography screening at the end of the follow-up period compared to women in the control group (odds ratio [OR] 2.26, 95 % confidence interval [CI]1.59-3.22). The effect of the intervention was stronger among women who were not up to date with mammography screening at enrollment (OR 3.63, 95 % CI 2.09-6.38). Patient navigation among urban African American Medicare beneficiaries increased self-reported mammography utilization. The results suggest that patient navigation for mammography screening should focus on women who are not up to date on their screening.

Evaluation of the Utility of Screening Mammography for High-Risk Women Undergoing Screening Breast MR Imaging.

PubMed

Lo, Glen; Scaranelo, Anabel M; Aboras, Hana; Ghai, Sandeep; Kulkarni, Supriya; Fleming, Rachel; Bukhanov, Karina; Crystal, Pavel

2017-10-01

Purpose To evaluate the value of mammography in detecting breast cancer in high-risk women undergoing screening breast magnetic resonance (MR) imaging. Materials and Methods An ethics-approved, retrospective review of prospective databases was performed to identify outcomes of 3934 screening studies (1977 screening MR imaging examinations and 1957 screening mammograms) performed between January 2012 and July 2014 in 1249 high-risk women. Performance measures including recall and cancer detection rates, sensitivity, specificity, and positive predictive values were calculated for both mammography and MR imaging. Results A total of 45 cancers (33 invasive and 12 ductal carcinomas in situ) were diagnosed, 43 were seen with MR imaging and 14 with both mammography and MR imaging. Additional tests (further imaging and/or biopsy) were recommended in 461 screening MR imaging studies (recall rate, 23.3%; 95% confidence interval [CI]: 21.5%, 25.2%), and mammography recalled 217 (recall rate, 11.1%; 95% CI: 9.7%, 12.6%). The cancer detection rate for MR imaging was 21.8 cancers per 1000 examinations (95% CI: 15.78, 29.19) and that for mammography was 7.2 cancers per 1000 examinations (95% CI: 3.92, 11.97; P < .001). Sensitivity and specificity of MR imaging were 96% and 78% respectively, and those of mammography were 31% and 89%, respectively (P < .001). Positive predictive value for MR imaging recalls was 9.3% (95% CI: 6.83%, 12.36%) and that for mammography recalls was 6.5% (95% CI: 3.57%, 10.59%). Conclusion Contemporaneous screening mammography did not have added value in detection of breast cancer for women who undergo screening MR imaging. Routine use of screening mammography in women undergoing screening breast MR imaging warrants reconsideration. © RSNA, 2017 Online supplemental material is available for this article.

Differentially pumped spray deposition as a rapid screening tool for organic and perovskite solar cells.

PubMed

Jung, Yen-Sook; Hwang, Kyeongil; Scholes, Fiona H; Watkins, Scott E; Kim, Dong-Yu; Vak, Doojin

2016-02-08

We report a spray deposition technique as a screening tool for solution processed solar cells. A dual-feed spray nozzle is introduced to deposit donor and acceptor materials separately and to form blended films on substrates in situ. Using a differential pump system with a motorised spray nozzle, the effect of film thickness, solution flow rates and the blend ratio of donor and acceptor materials on device performance can be found in a single experiment. Using this method, polymer solar cells based on poly(3-hexylthiophene) (P3HT):(6,6)-phenyl C61 butyric acid methyl ester (PC61BM) are fabricated with numerous combinations of thicknesses and blend ratios. Results obtained from this technique show that the optimum ratio of materials is consistent with previously reported values confirming this technique is a very useful and effective screening method. This high throughput screening method is also used in a single-feed configuration. In the single-feed mode, methylammonium iodide solution is deposited on lead iodide films to create a photoactive layer of perovskite solar cells. Devices featuring a perovskite layer fabricated by this spray process demonstrated a power conversion efficiencies of up to 7.9%.

High-performance and flexible thermoelectric films by screen printing solution-processed nanoplate crystals.

PubMed

Varghese, Tony; Hollar, Courtney; Richardson, Joseph; Kempf, Nicholas; Han, Chao; Gamarachchi, Pasindu; Estrada, David; Mehta, Rutvik J; Zhang, Yanliang

2016-09-12

Screen printing allows for direct conversion of thermoelectric nanocrystals into flexible energy harvesters and coolers. However, obtaining flexible thermoelectric materials with high figure of merit ZT through printing is an exacting challenge due to the difficulties to synthesize high-performance thermoelectric inks and the poor density and electrical conductivity of the printed films. Here, we demonstrate high-performance flexible films and devices by screen printing bismuth telluride based nanocrystal inks synthesized using a microwave-stimulated wet-chemical method. Thermoelectric films of several tens of microns thickness were screen printed onto a flexible polyimide substrate followed by cold compaction and sintering. The n-type films demonstrate a peak ZT of 0.43 along with superior flexibility, which is among the highest reported ZT values in flexible thermoelectric materials. A flexible thermoelectric device fabricated using the printed films produces a high power density of 4.1 mW/cm(2) with 60 °C temperature difference between the hot side and cold side. The highly scalable and low cost process to fabricate flexible thermoelectric materials and devices demonstrated here opens up many opportunities to transform thermoelectric energy harvesting and cooling applications.

High-performance and flexible thermoelectric films by screen printing solution-processed nanoplate crystals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Varghese, Tony; Hollar, Courtney; Richardson, Joseph

Screen printing allows for direct conversion of thermoelectric nanocrystals into flexible energy harvesters and coolers. However, obtaining flexible thermoelectric materials with high figure of merit ZT through printing is an exacting challenge due to the difficulties to synthesize high-performance thermoelectric inks and the poor density and electrical conductivity of the printed films. Here, we demonstrate high-performance flexible films and devices by screen printing bismuth telluride based nanocrystal inks synthesized using a microwave-stimulated wet-chemical method. Thermoelectric films of several tens of microns thickness were screen printed onto a flexible polyimide substrate followed by cold compaction and sintering. The n-type films demonstratemore » a peak ZT of 0.43 along with superior flexibility, which is among the highest reported ZT values in flexible thermoelectric materials. A flexible thermoelectric device fabricated using the printed films produces a high power density of 4.1 mW/cm 2 with 60°C temperature difference between the hot side and cold side. In conclusion, the highly scalable and low cost process to fabricate flexible thermoelectric materials and devices demonstrated here opens up many opportunities to transform thermoelectric energy harvesting and cooling applications.« less

Experimental Study of Reciprocating Friction between Rape Stalk and Bionic Nonsmooth Surface Units

PubMed Central

Ma, Zheng; Li, Yaoming; Xu, Lizhang

2015-01-01

Background. China is the largest producer of rape oilseed in the world; however, the mechanization level of rape harvest is relatively low, because rape materials easily adhere to the cleaning screens of combine harvesters, resulting in significant cleaning losses. Previous studies have shown that bionic nonsmooth surface cleaning screens restrain the adhesion of rape materials, but the underlying mechanisms remain unclear. Objective. The reciprocating friction between rape stalk and bionic nonsmooth metal surface was examined. Methods. The short-time Fourier transform method was used to discriminate the stable phase of friction signals and the stick-lag distance was defined to analyze the stable reciprocating friction in a phase diagram. Results. The reciprocating friction between rape stalk and metal surface is a typical stick-slip friction, and the bionic nonsmooth metal surfaces with concave or convex units reduced friction force with increasing reciprocating frequency. The results also showed that the stick-lag distance of convex surface increased with reciprocating frequency, which indicated that convex surface reduces friction force more efficiently. Conclusions. We suggest that bionic nonsmooth surface cleaning screens, especially with convex units, restrain the adhesion of rape materials more efficiently compared to the smooth surface cleaning screens. PMID:27034611

Differentially pumped spray deposition as a rapid screening tool for organic and perovskite solar cells

PubMed Central

Jung, Yen-Sook; Hwang, Kyeongil; Scholes, Fiona H.; Watkins, Scott E.; Kim, Dong-Yu; Vak, Doojin

2016-01-01

We report a spray deposition technique as a screening tool for solution processed solar cells. A dual-feed spray nozzle is introduced to deposit donor and acceptor materials separately and to form blended films on substrates in situ. Using a differential pump system with a motorised spray nozzle, the effect of film thickness, solution flow rates and the blend ratio of donor and acceptor materials on device performance can be found in a single experiment. Using this method, polymer solar cells based on poly(3-hexylthiophene) (P3HT):(6,6)-phenyl C61 butyric acid methyl ester (PC61BM) are fabricated with numerous combinations of thicknesses and blend ratios. Results obtained from this technique show that the optimum ratio of materials is consistent with previously reported values confirming this technique is a very useful and effective screening method. This high throughput screening method is also used in a single-feed configuration. In the single-feed mode, methylammonium iodide solution is deposited on lead iodide films to create a photoactive layer of perovskite solar cells. Devices featuring a perovskite layer fabricated by this spray process demonstrated a power conversion efficiencies of up to 7.9%. PMID:26853266

High-performance and flexible thermoelectric films by screen printing solution-processed nanoplate crystals

DOE PAGES

Varghese, Tony; Hollar, Courtney; Richardson, Joseph; ...

2016-09-12

Screen printing allows for direct conversion of thermoelectric nanocrystals into flexible energy harvesters and coolers. However, obtaining flexible thermoelectric materials with high figure of merit ZT through printing is an exacting challenge due to the difficulties to synthesize high-performance thermoelectric inks and the poor density and electrical conductivity of the printed films. Here, we demonstrate high-performance flexible films and devices by screen printing bismuth telluride based nanocrystal inks synthesized using a microwave-stimulated wet-chemical method. Thermoelectric films of several tens of microns thickness were screen printed onto a flexible polyimide substrate followed by cold compaction and sintering. The n-type films demonstratemore » a peak ZT of 0.43 along with superior flexibility, which is among the highest reported ZT values in flexible thermoelectric materials. A flexible thermoelectric device fabricated using the printed films produces a high power density of 4.1 mW/cm 2 with 60°C temperature difference between the hot side and cold side. In conclusion, the highly scalable and low cost process to fabricate flexible thermoelectric materials and devices demonstrated here opens up many opportunities to transform thermoelectric energy harvesting and cooling applications.« less

High-performance and flexible thermoelectric films by screen printing solution-processed nanoplate crystals

PubMed Central

Varghese, Tony; Hollar, Courtney; Richardson, Joseph; Kempf, Nicholas; Han, Chao; Gamarachchi, Pasindu; Estrada, David; Mehta, Rutvik J.; Zhang, Yanliang

2016-01-01

Screen printing allows for direct conversion of thermoelectric nanocrystals into flexible energy harvesters and coolers. However, obtaining flexible thermoelectric materials with high figure of merit ZT through printing is an exacting challenge due to the difficulties to synthesize high-performance thermoelectric inks and the poor density and electrical conductivity of the printed films. Here, we demonstrate high-performance flexible films and devices by screen printing bismuth telluride based nanocrystal inks synthesized using a microwave-stimulated wet-chemical method. Thermoelectric films of several tens of microns thickness were screen printed onto a flexible polyimide substrate followed by cold compaction and sintering. The n-type films demonstrate a peak ZT of 0.43 along with superior flexibility, which is among the highest reported ZT values in flexible thermoelectric materials. A flexible thermoelectric device fabricated using the printed films produces a high power density of 4.1 mW/cm2 with 60 °C temperature difference between the hot side and cold side. The highly scalable and low cost process to fabricate flexible thermoelectric materials and devices demonstrated here opens up many opportunities to transform thermoelectric energy harvesting and cooling applications. PMID:27615036

Materials for Space Exploration

NASA Technical Reports Server (NTRS)

Robertson, Luke B.; Williams, Martha

2010-01-01

Topics include a lab overview, testing and processing equipment, hemochromic hydrogen sensors, antimicrobial materials, wire system materials, CNT ink formulations, CNT ink dust screens, CNT ink printed circuitry, cryogenic materials development, fire and polymers, the importance of lighting, electric lighting systems, LED for plant growth, and carbon nanotube fiber filaments.

Cervical Screening within HIV Care: Findings from an HIV-Positive Cohort in Ukraine

PubMed Central

Bailey, Heather; Thorne, Claire; Semenenko, Igor; Malyuta, Ruslan; Tereschenko, Rostislav; Adeyanova, Irina; Kulakovskaya, Elena; Ostrovskaya, Lyudmila; Kvasha, Liliana; Cortina-Borja, Mario; Townsend, Claire L.

2012-01-01

Introduction HIV-positive women have an increased risk of invasive cervical cancer but cytologic screening is effective in reducing incidence. Little is known about cervical screening coverage or the prevalence of abnormal cytology among HIV-positive women in Ukraine, which has the most severe HIV epidemic in Europe. Methods Poisson regression models were fitted to data from 1120 women enrolled at three sites of the Ukraine Cohort Study of HIV-infected Childbearing Women to investigate factors associated with receiving cervical screening as part of HIV care. All women had been diagnosed as HIV-positive before or during their most recent pregnancy. Prevalence of cervical abnormalities (high/low grade squamous intraepithelial lesions) among women who had been screened was estimated, and associated factors explored. Results Overall, 30% (337/1120) of women had received a cervical screening test as part of HIV care at study enrolment (median 10 months postpartum), a third (115/334) of whom had been tested >12 months previously. In adjusted analyses, women diagnosed as HIV-positive during (vs before) their most recent pregnancy were significantly less likely to have a screening test reported, on adjusting for other potential risk factors (adjusted prevalence ratio (APR) 0.62, 95% CI 0.51–0.75 p<0.01 for 1st/2nd trimester diagnosis and APR 0.42, 95% CI 0.28–0.63 p<0.01 for 3rd trimester/intrapartum diagnosis). Among those with a cervical screening result reported at any time (including follow-up), 21% (68/325) had a finding of cervical abnormality. In adjusted analyses, Herpes simplex virus 2 seropositivity and a recent diagnosis of bacterial vaginosis were associated with an increased risk of abnormal cervical cytology (APR 1.83 95% CI 1.07–3.11 and APR 3.49 95% CI 2.11–5.76 respectively). Conclusions In this high risk population, cervical screening coverage as part of HIV care was low and could be improved by an organised cervical screening programme for HIV-positive women. Bacterial vaginosis testing and treatment may reduce vulnerability to cervical abnormalities. PMID:22545087

Miniaturized microscope for high throughput screening of tumor spheroids in microfluidic devices

NASA Astrophysics Data System (ADS)

Uranga, Javier; Rodríguez-Pena, Alejandro; Gahigiro, Desiré; Ortiz-de-Solorzano, Carlos

2018-02-01

High-throughput in vitro screening of highly physiological three-dimensional cell cultures (3D-HTS) is rapidly gaining importance in preclinical studies, to study the effect of the microenvironment in tumor development, and to evaluate the efficacy of new anticancer drugs. Furthermore, it could also be envisioned the use of 3D-HTS systems in personalized anti-cancer treatment planning, based on tumor organoids or spheroids grown from tumor biopsies or isolated tumor circulating cells. Most commercial, multi-well plate based 3D-HTS systems are large, expensive, and are based on the use of multi-well plates that hardly provide a physiological environment and require the use of large amounts of biological material and reagents. In this paper we present a novel, miniaturized inverted microscope (hereinafter miniscospe), made up of low-cost, mass producible parts, that can be used to monitor the growth of living tumor cell spheroids within customized three-dimensional microfluidic platforms. Our 3D-HTS miniscope combines phase contrast imaging based on oblique back illumination technique with traditional widefield epi-fluorescence imaging, implemented using miniaturized electro-optical parts and gradient-index refraction lenses. This small (3x6x2cm), lightweight device can effectively image overtime the growth of (>200) tumor spheroids in a controlled and reproducible environment. Our miniscope can be used to acquire time-lapse images of cellular living spheroids over the course of several hours and captures their growth before and after drug treatment, to evaluate the effectiveness of the drug.

Development of a comprehensive list of criteria for evaluating consumer education materials on colorectal cancer screening

PubMed Central

2013-01-01

Background Appropriate patient information materials may support the consumer’s decision to attend or not to attend colorectal cancer (CRC) screening tests (fecal occult blood test and screening colonoscopy). The aim of this study was to develop a list of criteria to assess whether written health information materials on CRC screening provide balanced, unbiased, quantified, understandable, and evidence-based health information (EBHI) about CRC and CRC screening. Methods The list of criteria was developed based on recommendations and assessment tools for health information in the following steps: (1) Systematic literature search in 13 electronic databases (search period: 2000–2010) and completed by an Internet search (2) Extraction of identified criteria (3) Grouping of criteria into categories and domains (4) Compilation of a manual of adequate answers derived from systematic reviews and S3 guidelines (5) Review by external experts (6) Modification (7) Final discussion with external experts. Results Thirty-one publications on health information tools and recommendations were identified. The final list of criteria includes a total of 230 single criteria in three generic domains (formal issues, presentation and understandability, and neutrality and balance) and one CRC-specific domain. A multi-dimensional rating approach was used whenever appropriate (e.g., rating for the presence, correctness, presentation and level of evidence of information). Free text input was allowed to ensure the transparency of assessment. The answer manual proved to be essential to the rating process. Quantitative analyses can be made depending on the level and dimensions of criteria. Conclusions This comprehensive list of criteria clearly has a wider range of evaluation than previous assessment tools. It is not intended as a final quality assessment tool, but as a first step toward thorough evaluation of specific information materials for their adherence to EBHI requirements. This criteria list may also be used to revise leaflets and to develop evidence-based health information on CRC screening. After adjustment for different procedure-specific criteria, the list of criteria can also be applied to other cancer screening procedures. PMID:24028691

Apparatus for combinatorial screening of electrochemical materials

DOEpatents

Kepler, Keith Douglas [Belmont, CA; Wang, Yu [Foster City, CA

2009-12-15

A high throughput combinatorial screening method and apparatus for the evaluation of electrochemical materials using a single voltage source (2) is disclosed wherein temperature changes arising from the application of an electrical load to a cell array (1) are used to evaluate the relative electrochemical efficiency of the materials comprising the array. The apparatus may include an array of electrochemical cells (1) that are connected to each other in parallel or in series, an electronic load (2) for applying a voltage or current to the electrochemical cells (1), and a device (3), external to the cells, for monitoring the relative temperature of each cell when the load is applied.

Dielectric properties of semi-insulating Fe-doped InP in the terahertz spectral region.

PubMed

Alyabyeva, L N; Zhukova, E S; Belkin, M A; Gorshunov, B P

2017-08-04

We report the values and the spectral dependence of the real and imaginary parts of the dielectric permittivity of semi-insulating Fe-doped InP crystalline wafers in the 2-700 cm -1 (0.06-21 THz) spectral region at room temperature. The data shows a number of absorption bands that are assigned to one- and two-phonon and impurity-related absorption processes. Unlike the previous studies of undoped or low-doped InP material, our data unveil the dielectric properties of InP that are not screened by strong free-carrier absorption and will be useful for designing a wide variety of InP-based electronic and photonic devices operating in the terahertz spectral range.

[Possibility and necessity of constructing new nanoformula systems of traditional Chinese medicine].

PubMed

Ling, Chang-quan; Su, Yong-hua

2010-02-01

The past decade has witnessed the remarkable progress on nanotechnology and nanoherb. With the globally rapid development of nanotechnology, we are considering to construct new nanoformula systems of traditional Chinese medicine (TCM) by using porous materials, multilayered core-shell particles or nanoparticles containing various multifunctional parts. With the compatibility of sovereign, minister, assistant and courier in a formula, new nanoformula systems of TCM will have various advantages, such as containing multiple active species, controlled release, targeting function, and labeling and tracing capabilities. Using the latest breakthroughs of nanotechnology for the modern research of TCM will greatly help enhance the ability to investigate the principles of TCM, and to design, screen and utilize new nanoformula systems of TCM.

30 CFR 57.14110 - Flying or falling materials.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Flying or falling materials. 57.14110 Section... and Equipment Safety Devices and Maintenance Requirements § 57.14110 Flying or falling materials. In areas where flying or falling materials generated from the operation of screens, crushers, or conveyors...

30 CFR 56.14110 - Flying or falling materials.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Flying or falling materials. 56.14110 Section... Equipment Safety Devices and Maintenance Requirements § 56.14110 Flying or falling materials. In areas where flying or falling materials generated from the operation of screens, crushers, or conveyors present a...

30 CFR 56.14110 - Flying or falling materials.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Flying or falling materials. 56.14110 Section... Equipment Safety Devices and Maintenance Requirements § 56.14110 Flying or falling materials. In areas where flying or falling materials generated from the operation of screens, crushers, or conveyors present a...

30 CFR 57.14110 - Flying or falling materials.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Flying or falling materials. 57.14110 Section... and Equipment Safety Devices and Maintenance Requirements § 57.14110 Flying or falling materials. In areas where flying or falling materials generated from the operation of screens, crushers, or conveyors...

30 CFR 57.14110 - Flying or falling materials.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Flying or falling materials. 57.14110 Section... and Equipment Safety Devices and Maintenance Requirements § 57.14110 Flying or falling materials. In areas where flying or falling materials generated from the operation of screens, crushers, or conveyors...

30 CFR 56.14110 - Flying or falling materials.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Flying or falling materials. 56.14110 Section... Equipment Safety Devices and Maintenance Requirements § 56.14110 Flying or falling materials. In areas where flying or falling materials generated from the operation of screens, crushers, or conveyors present a...

30 CFR 57.14110 - Flying or falling materials.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Flying or falling materials. 57.14110 Section... and Equipment Safety Devices and Maintenance Requirements § 57.14110 Flying or falling materials. In areas where flying or falling materials generated from the operation of screens, crushers, or conveyors...

30 CFR 56.14110 - Flying or falling materials.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Flying or falling materials. 56.14110 Section... Equipment Safety Devices and Maintenance Requirements § 56.14110 Flying or falling materials. In areas where flying or falling materials generated from the operation of screens, crushers, or conveyors present a...

30 CFR 56.14110 - Flying or falling materials.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Flying or falling materials. 56.14110 Section... Equipment Safety Devices and Maintenance Requirements § 56.14110 Flying or falling materials. In areas where flying or falling materials generated from the operation of screens, crushers, or conveyors present a...

30 CFR 57.14110 - Flying or falling materials.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Flying or falling materials. 57.14110 Section... and Equipment Safety Devices and Maintenance Requirements § 57.14110 Flying or falling materials. In areas where flying or falling materials generated from the operation of screens, crushers, or conveyors...

Performance evaluation for screening laboratories of the Asia-Pacific region.

PubMed

Hannon, W Harry

2003-01-01

The Centers for Disease Control and Prevention (CDC) has a long history of involvement in quality assurance (QA) activities for support of newborn screening laboratories. Since 1978, CDC's Newborn Screening Quality Assurance Program (NSQAP), has distributed dried-blood spot (DBS) materials for external QA and has maintained related projects to serve newborn screening laboratories. The first DBS materials were distributed for congenital hypothyroidism screening in 1978 and by 2001, NSQAP had expanded to over 30 disorders and performance monitoring for all filter paper production lots from approved commercial sources. In 2001, there were 250 active NSQAP participants, 167 laboratories from 45 countries and 83 laboratories in the United States. Of these laboratories, 31 are from the Asia Pacific Region representing nine countries primarily for two disorders. In 1999, US laboratories had more errors for Performance Evaluation (PE) specimens than other laboratories; but in 2000, US laboratories had fewer errors. International laboratories reported 0.3% false-negative PE clinical assessments for congenital hypothyroidism and 0.5% for phenylketonuria (0.5%) in 2000. Paperless PE data-reporting operation using an Internet website has recently been implemented.

New materials and structures for photovoltaics

NASA Astrophysics Data System (ADS)

Zunger, Alex; Wagner, S.; Petroff, P. M.

1993-01-01

Despite the fact that over the years crystal chemists have discovered numerous semiconducting substances, and that modern epitaxial growth techniques are able to produce many novel atomic-scale architectures, current electronic and opto-electronic technologies are based but on a handful of ˜10 traditional semiconductor core materials. This paper surveys a number of yet-unexploited classes of semiconductors, pointing to the much-needed research in screening, growing, and characterizing promising members of these classes. In light of the unmanageably large number of a-priori possibilities, we emphasize the role that structural chemistry and modern computer-aided design must play in screening potentially important candidates. The basic classes of materials discussed here include nontraditional alloys, such as non-isovalent and heterostructural semiconductors, materials at reduced dimensionality, including superlattices, zeolite-caged nanostructures and organic semiconductors, spontaneously ordered alloys, interstitial semiconductors, filled tetrahedral structures, ordered vacancy compounds, and compounds based on d and f electron elements. A collaborative effort among material predictor, material grower, and material characterizer holds the promise for a successful identification of new and exciting systems.

Dr. Janie Merkel is interviewed by Ryan Blum and Janice Friend.

PubMed

Merkel, Janie

2007-12-01

Dr. Janie Merkel is the director of Yale's Chemical Genomics Screening Facility, a high-throughput screening laboratory that is part of the Yale University Center for Genomics and Proteomics. The Screening Facility connects Yale researchers with industry-quality robotic machinery and a diverse group of compound libraries, which have been used successfully to link therapeutic targets with potential therapies.

A case study of haemoglobinopathy screening in the Netherlands: witnessing the past, lessons for the future

PubMed Central

Jans, Suze M.P.J.; van El, Carla G.; Houwaart, Eddy S.; Westerman, Marjan J.; Janssens, Rien J.P.A.; Lagro-Janssen, Antoinette L.M.; Plass, Anne Marie C.; Cornel, Martina C.

2011-01-01

Objectives. In 2007 neonatal screening (NNS) was expanded to include screening for sickle cell disease (SCD) and beta-thalassaemia. Up until that year no formal recommendations for haemoglobinopathy (carrier) screening existed in the Netherlands. Although it has been subject to debate in the past, preconceptional and prenatal haemoglobinopathy carrier screening are not part of routine healthcare in the Netherlands. This study aimed to explore the decision-making process of the past: why was the introduction of a screening programme for haemoglobinopathy considered to be untimely, and did ethnicity play a role given the history in other countries surrounding the introduction of haemoglobinopathy screening? Design. A witness seminar was organised, inviting key figures to discuss the decision-making process concerning haemoglobinopathy screening in the Netherlands, thereby adding new perspectives on past events. The transcript was content-analysed. Results. The subject of haemoglobinopathy screening first appeared in the 1970s. As opposed to a long history of neglect of African-American health in the United States, the heritage of the Second World War influenced the decision-making process in the Netherlands. As a consequence, registration of ethnicity surfaced as an impeding factor. However, overall, official Dutch screening policy was restrained regarding reproductive issues caused by fear of eugenics. In the 1990s haemoglobinopathy screening was found to be ‘not opportune’ due to low prevalence, lack of knowledge and fear of stigmatisation. Currently the registration of ethnicity remains on the political agenda, but still proves to be a sensitive subject. Discussion. Carrier screening in general never appeared high on the policy agenda. Registration of ethnicity remains sensitive caused by the current political climate. Complexities related to carrier screening are a challenge in Dutch healthcare. Whether carrier screening will be considered a valuable complementary strategy in the Netherlands, depends partly on participation of representatives of high-risk groups in policy making. PMID:21819310

Screening mammography among nursing home residents in the United States: Current guidelines and practice.

PubMed

Mack, Deborah S; Epstein, Mara M; Dubé, Catherine; Clark, Robin E; Lapane, Kate L

2018-06-04

United States (US) guidelines regarding when to stop routine breast cancer screening remain unclear. No national studies to-date have evaluated the use of screening mammography among US long-stay nursing home residents. This cross-sectional study was designed to identify prevalence, predictors, and geographic variation of screening mammography among that population in the context of current US guidelines. Screening mammography prevalence, identified with Physician/Supplier Part B claims and stratified by guideline age classification (65-74, ≥75 years), was estimated for all women aged ≥65 years residing in US Medicare- and Medicaid- certified nursing homes (≥1 year) with an annual Minimum Data Set (MDS) 3.0 assessment, continuous Medicare Part B enrollment, and no clinical indication for screening mammography as of 2011 (n = 389,821). The associations between resident- and regional- level factors, and screening mammography, were estimated by crude and adjusted prevalence ratios from robust Poisson regressions clustered by facility. Women on average were 85.4 (standard deviation ±8.1) years old, 77.9% were disabled, and 76.3% cognitively impaired. Screening mammography prevalence was 7.1% among those aged 65-74 years (95% Confidence Interval (CI): 6.8%-7.3%) and 1.7% among those ≥75 years (95% CI, 1.7%-1.8%), with geographic variation observed. Predictors of screening in both age groups included race, cognitive impairment, frailty, hospice, and some comorbidities. These results shed light on the current screening mammography practices in US nursing homes. Thoughtful consideration about individual screening recommendations and the implementation of more clear guidelines for this special population are warranted to prevent overscreening. Copyright © 2018 Elsevier Inc. All rights reserved.

Use of Breast Cancer Screening and Its Association with Later Use of Preventive Services among Medicare Beneficiaries.

PubMed

Kang, Stella K; Jiang, Miao; Duszak, Richard; Heller, Samantha L; Hughes, Danny R; Moy, Linda

2018-06-05

Purpose To retrospectively assess whether there is an association between screening mammography and the use of a variety of preventive services in women who are enrolled in Medicare. Materials and Methods U.S. Medicare claims from 2010 to 2014 Research Identifiable Files were reviewed to retrospectively identify a group of women who underwent screening mammography and a control group without screening mammography in 2012. The screened group was divided into positive versus negative results at screening, and the positive subgroup was divided into false-positive and true-positive findings. Multivariate logistic regression models and inverse probability of treatment weighting were used to examine the relationship between screening status and the probabilities of undergoing Papanicolaou test, bone mass measurement, or influenza vaccination in the following 2 years. Results The cohort consisted of 555 705 patients, of whom 185 625 (33.4%) underwent mammography. After adjusting for patient demographics, comorbidities, geographic covariates, and baseline preventive care, women who underwent index screening mammography (with either positive or negative results) were more likely than unscreened women to later undergo Papanicolaou test (odds ratio [OR], 1.49; 95% confidence interval: 1.40, 1.58), bone mass measurement (OR, 1.70; 95% confidence interval: 1.63, 1.78), and influenza vaccine (OR, 1.45; 95% confidence interval: 1.37, 1.53). In women who had not undergone these preventive measures in the 2 years before screening mammography, use of these three services after false-positive findings at screening was no different than after true-negative findings at screening. Conclusion In beneficiaries of U.S. Medicare, use of screening mammography was associated with higher likelihood of adherence to other preventive guidelines, without a negative association between false-positive results and cervical cancer screening. © RSNA, 2018 Online supplemental material is available for this article.

Methodology to Improve Aviation Security With Terrorist Using Aircraft as a Weapon

DTIC Science & Technology

2013-09-01

STATEMENT Approval for public release;distribution is unlimited 12b. DISTRIBUTION CODE 13. ABSTRACT (maximum 200 words ) The aviation industry... Electronic Baggage Screening Program EDS Explosive Detection System EMMI Energy, Matter, Material wealth, and Information ETD Explosives Trace...12 All checked baggage in the United States has been subjected to 100% screening since December 2003 under TSA’s Electronic Baggage Screening

Vibration characteristics of an inclined flip-flow screen panel in banana flip-flow screens

NASA Astrophysics Data System (ADS)

Xiong, Xiaoyan; Niu, Linkai; Gu, Chengxiang; Wang, Yinhua

2017-12-01

A banana flip-flow screen is an effective solution for the screening of high-viscosity, high-water and fine materials. As one of the key components, the vibration characteristics of the inclined flip-flow screen panel largely affects the screen performance and the processing capacity. In this paper, a mathematical model for the vibration characteristic of the inclined flip-flow screen panel is proposed based on Catenary theory. The reasonability of Catenary theory in analyzing the vibration characteristic of flip-flow screen panels is verified by a published experiment. Moreover, the effects of the rotation speed of exciters, the incline angle, the slack length and the characteristics of the screen on the vertical deflection, the vertical velocity and the vertical acceleration of the screen panel are investigated parametrically. The results show that the rotation speed of exciters, the incline angle, the slack length and the characteristics of the screen have significant effects on the vibrations of an inclined flip-flow screen panel, and these parameters should be optimized.

Implementing Adolescent Screening, Brief Intervention, and Referral to Treatment (SBIRT) Education in a Pediatric Residency Curriculum.

PubMed

Schram, Patricia; Harris, Sion K; Van Hook, Shari; Forman, Sara; Mezzacappa, Enrico; Pavlyuk, Roman; Levy, Sharon

2015-01-01

Screening, brief intervention, and referral to treatment (SBIRT) is recommended as part of routine health care for adolescents as well as adults. In an effort to promote universal SBIRT, the Substance Abuse and Mental Health Services Administration awarded funding to residency programs to develop and implement SBIRT education and training. Our project focused on creating scientifically based, developmentally appropriate strategies and teaching materials for the adolescent age range. This paper describes curriculum development and implementation and presents evaluation data. Pediatric and child psychiatry residents were trained. The training consisted of 4 activities: (1) case-based teaching modules, (2) role-play of motivational interviewing and brief interventions, (3) mock interviews with trained adolescents, and (4) supervised "hands-on" screening and brief interventions. Main outcome measures included trainee satisfaction, and SBIRT knowledge, perceived self-efficacy, and self- and observer report of use of the SBIRT algorithm. Among 150 total participants completing the SBIRT training modules, nearly all (92.3%) were satisfied/very satisfied with the training modules. Knowledge accuracy immediately post training was high, but declined significantly by the end of the first residency year, with little change across subsequent years of residency. Confidence ratings also declined over time. Use of the SBIRT algorithm during the Adolescent Medicine rotation was high according to trainee self- and faculty observer report. We found evidence of training satisfaction, increased confidence in talking to adolescents about substance use, and widespread use of recommended practices immediately following training. Use of a highly structured algorithm to guide practice, and simple, highly structured brief interventions was a successful training approach, as residents self-reported accurate use of the SBIRT algorithm immediately after training. Knowledge and self-confidence declined over time. It is possible that "booster" sessions and ongoing opportunities to review materials could help residents retain knowledge and skills.

Integration of Multiple Components in Polystyrene-based Microfluidic Devices Part 1: Fabrication and Characterization

PubMed Central

Johnson, Alicia S.; Anderson, Kari B.; Halpin, Stephen T.; Kirkpatrick, Douglas C.; Spence, Dana M.; Martin, R. Scott

2012-01-01

In Part I of a two-part series, we describe a simple, and inexpensive approach to fabricate polystyrene devices that is based upon melting polystyrene (from either a Petri dish or powder form) against PDMS molds or around electrode materials. The ability to incorporate microchannels in polystyrene and integrate the resulting device with standard laboratory equipment such as an optical plate reader for analyte readout and micropipettors for fluid propulsion is first described. A simple approach for sample and reagent delivery to the device channels using a standard, multi-channel micropipette and a PDMS-based injection block is detailed. Integration of the microfluidic device with these off-chip functions (sample delivery and readout) enables high throughput screens and analyses. An approach to fabricate polystyrene-based devices with embedded electrodes is also demonstrated, thereby enabling the integration of microchip electrophoresis with electrochemical detection through the use of a palladium electrode (for a decoupler) and carbon-fiber bundle (for detection). The device was sealed against a PDMS-based microchannel and used for the electrophoretic separation and amperometric detection of dopamine, epinephrine, catechol, and 3,4-dihydroxyphenylacetic acid. Finally, these devices were compared against PDMS-based microchips in terms of their optical transparency and absorption of an anti-platelet drug, clopidogrel. Part I of this series lays the foundation for Part II, where these devices were utilized for various on-chip cellular analysis. PMID:23120747

Accessibility of Mobile Devices for Visually Impaired Users: An Evaluation of the Screen-Reader VoiceOver.

PubMed

Smaradottir, Berglind; Håland, Jarle; Martinez, Santiago

2017-01-01

A mobile device's touchscreen allows users to use a choreography of hand gestures to interact with the user interface. A screen reader on a mobile device is designed to support the interaction of visually disabled users while using gestures. This paper presents an evaluation of VoiceOver, a screen reader in Apple Inc. products. The evaluation was a part of the research project "Visually impaired users touching the screen - a user evaluation of assistive technology".

Productivity, quality, and patient satisfaction: comparison of part-time and full-time primary care physicians.

PubMed

Fairchild, D G; McLoughlin, K S; Gharib, S; Horsky, J; Portnow, M; Richter, J; Gagliano, N; Bates, D W

2001-10-01

Although few data are available, many believe that part-time primary care physicians (PCPs) are less productive and provide lower quality care than full-time PCPs. Some insurers exclude part-time PCPs from their provider networks. To compare productivity, quality of preventive care, patient satisfaction, and risk-adjusted resource utilization of part-time and full-time PCPs. Retrospective cohort study. Boston. PCPs affiliated with 2 academic outpatient primary care networks. PCP productivity, patient satisfaction, resource utilization, and compliance with screening guidelines. Part-time PCP productivity was greater than that of full-time PCPs (2.1 work relative value units (RVUs)/bookable clinical hour versus 1.3 work RVUs/bookable clinical hour, P< .01). A similar proportion of part-time PCPs (80%) and full-time PCPs (75%) met targets for mammography, Pap smears, and cholesterol screening (P = .67). After adjusting for clinical case mix, practice location, gender, board certification status, and years in practice, resource utilization of part-time PCPs (138 dollars [95% confidence interval (CI), 108 dollars to 167 dollars]) was similar to that of full-time PCPs (139 dollars [95% CI, 108 dollars to 170 dollars], P = .92). Patient satisfaction was similar for part-time and full-time PCPs. In these academic primary care practices, rates of patient satisfaction, compliance with screening guidelines, and resource utilization were similar for part-time PCPs compared to full-time PCPs. Productivity per clinical hour was markedly higher for part-time PCPs. Despite study limitations, these data suggest that academic part-time PCPs are at least as efficient as full-time PCPs and that the quality of their work is similar.

Non-aqueous cleaning solvent substitution

NASA Technical Reports Server (NTRS)

Meier, Gerald J.

1994-01-01

A variety of environmental, safety, and health concerns exist over use of chlorinated and fluorinated cleaning solvents. Sandia National Laboratories, Lawrence Livermore National Laboratories, and the Kansas City Division of AlliedSignal have combined efforts to focus on finding alternative cleaning solvents and processes which are effective, environmentally safe, and compliant with local, state, and federal regulations. An alternative solvent has been identified, qualified, and implemented into production of complex electronic assemblies, where aqueous and semi-aqueous cleaning processes are not allowed. Extensive compatibility studies were performed with components, piece-parts, and materials. Electrical testing and accelerated aging were used to screen for detrimental, long-term effects. A terpene, d-limonene, was selected as the solvent of choice, and it was found to be compatible with the components and materials tested. A brief history of the overall project will be presented, along with representative cleaning efficiency results, compatibility results, and residual solvent data. The electronics industry is constantly searching for proven methods and environmentally-safe materials to use in manufacturing processes. The information in this presentation will provide another option to consider on future projects for applications requiring high levels of quality, reliability, and cleanliness from non-aqueous cleaning processes.

Emission of blue light from hydrogenated amorphous silicon carbide

NASA Astrophysics Data System (ADS)

Nevin, W. A.; Yamagishi, H.; Yamaguchi, M.; Tawada, Y.

1994-04-01

THE development of new electroluminescent materials is of current technological interest for use in flat-screen full-colour displays1. For such applications, amorphous inorganic semiconductors appear particularly promising, in view of the ease with which uniform films with good mechanical and electronic properties can be deposited over large areas2. Luminescence has been reported1 in the red-green part of the spectrum from amorphous silicon carbide prepared from gas-phase mixtures of silane and a carbon-containing species (usually methane or ethylene). But it is not possible to achieve blue luminescence by this approach. Here we show that the use of an aromatic species-xylene-as the source of carbon during deposition results in a form of amorphous silicon carbide that exhibits strong blue luminescence. The underlying structure of this material seems to be an unusual combination of an inorganic silicon carbide lattice with a substantial 'organic' π-conjugated carbon system, the latter dominating the emission properties. Moreover, the material can be readily doped with an electron acceptor in a manner similar to organic semiconductors3, and might therefore find applications as a conductivity- or colour-based chemical sensor.

The response of a fast scintillator screen (YAP:Ce) to low energy ions (0-40 keV) and its use to detect fast-ion-loss in stellarator TJ-II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martínez, M., E-mail: marcos.martinez@externos.ciemat.es; Zurro, B.; Baciero, A.

2016-11-15

A systematic study of scintillation materials was undertaken to improve the time resolution of the fast ion diagnostic currently installed at TJ-II stellarator. It was found that YAP:Ce (formula YAlO{sub 3}:Ce, Yttrium Aluminum Perovskite doped with Cerium) ionoluminescence offers better sensitivity and time response compared to the standard detector material, SrGa{sub 2}S{sub 4}:Eu (TG-Green), currently used in TJ-II. A comparison between both materials was carried out by irradiating them with H{sup +} ions of up to 40 keV using a dedicated laboratory setup. It is found that for the low energy ions of interest at TJ-II, YAP:Ce offers 20 timesmore » higher sensitivity than TG-Green and much faster decay time, 27 ns versus 540 ns. It is expected that the use of YAP:Ce in combination with a faster data acquisition and an ion counting software as part of the TJ-II ion luminescent probe will provide 20 times faster data on ion loss.« less

Modeling genome coverage in single-cell sequencing

PubMed Central

Daley, Timothy; Smith, Andrew D.

2014-01-01

Motivation: Single-cell DNA sequencing is necessary for examining genetic variation at the cellular level, which remains hidden in bulk sequencing experiments. But because they begin with such small amounts of starting material, the amount of information that is obtained from single-cell sequencing experiment is highly sensitive to the choice of protocol employed and variability in library preparation. In particular, the fraction of the genome represented in single-cell sequencing libraries exhibits extreme variability due to quantitative biases in amplification and loss of genetic material. Results: We propose a method to predict the genome coverage of a deep sequencing experiment using information from an initial shallow sequencing experiment mapped to a reference genome. The observed coverage statistics are used in a non-parametric empirical Bayes Poisson model to estimate the gain in coverage from deeper sequencing. This approach allows researchers to know statistical features of deep sequencing experiments without actually sequencing deeply, providing a basis for optimizing and comparing single-cell sequencing protocols or screening libraries. Availability and implementation: The method is available as part of the preseq software package. Source code is available at http://smithlabresearch.org/preseq. Contact: andrewds@usc.edu Supplementary information: Supplementary material is available at Bioinformatics online. PMID:25107873

Centrifugal Sieve for Gravity-Level-Independent Size Segregation of Granular Materials

NASA Technical Reports Server (NTRS)

Walton, Otis R.; Dreyer, Christopher; Riedel, Edward

2013-01-01

Conventional size segregation or screening in batch mode, using stacked vibrated screens, is often a time-consuming process. Utilization of centrifugal force instead of gravity as the primary body force can significantly shorten the time to segregate feedstock into a set of different-sized fractions. Likewise, under reduced gravity or microgravity, a centrifugal sieve system would function as well as it does terrestrially. When vibratory and mechanical blade sieving screens designed for terrestrial conditions were tested under lunar gravity conditions, they did not function well. The centrifugal sieving design of this technology overcomes the issues that prevented sieves designed for terrestrial conditions from functioning under reduced gravity. These sieves feature a rotating outer (cylindrical or conical) screen wall, rotating fast enough for the centrifugal forces near the wall to hold granular material against the rotating screen. Conventional centrifugal sieves have a stationary screen and rapidly rotating blades that shear the granular solid near the stationary screen, and effect the sieving process assisted by the airflow inside the unit. The centrifugal sieves of this new design may (or may not) have an inner blade or blades, moving relative to the rotating wall screen. Some continuous flow embodiments would have no inner auger or blades, but achieve axial motion through vibration. In all cases, the shearing action is gentler than conventional centrifugal sieves, which have very high velocity differences between the stationary outer screen and the rapidly rotating blades. The new design does not depend on airflow in the sieving unit, so it will function just as well in vacuum as in air. One advantage of the innovation for batch sieving is that a batch-mode centrifugal sieve may accomplish the same sieving operation in much less time than a conventional stacked set of vibrated screens (which utilize gravity as the primary driving force for size separation). In continuous mode, the centrifugal sieves can provide steady streams of fine and coarse material separated from a mixed feedstock flow stream. The centrifugal sieves can be scaled to any desired size and/or mass flow rate. Thus, they could be made in sizes suitable for small robotic exploratory missions, or for semi-permanent processing of regolith for extraction of volatiles of minerals. An advantage of the continuous-mode system is that it can be made with absolutely no gravity flow components for feeding material into, or for extracting the separated size streams from, the centrifugal sieve. Thus, the system is capable of functioning in a true microgravity environment. Another advantage of the continuous-mode system is that some embodiments of the innovation have no internal blades or vanes, and thus, can be designed to handle a very wide range of feedstock sizes, including occasional very large oversized pieces, without jamming or seizing up.

GPS/IGS Design Analysis Report. Volume 1

DTIC Science & Technology

1982-11-15

PLL Phase Lock Loop FMPCB Parts, Hateriala, and Processes Control Board PPPL Program Preferred Parts List P14 Pseudo-Rando* Noise PSI Peculiar Support...program preferred ?arts list ( PPPL ). Where ?PPL parts were not obtainable, screening, burn-in, and other tes. were imposed on those parts to assure

Pre-Participation Screening: The Use of Fundamental Movements as an Assessment of Function – Part 1

PubMed Central

Burton, Lee; Hoogenboom, Barb

2006-01-01

To prepare an athlete for the wide variety of activities needed to participate in their sport, the analysis of fundamental movements should be incorporated into pre-participation screening in order to determine who possesses, or lacks, the ability to perform certain essential movements. In a series of two articles, the background and rationale for the analysis of fundamental movement will be provided. In addition, one such evaluation tool that attempts to assess the fundamental movement patterns performed by an individual, the Functional Movement Screen (FMS™), will be described. Three of the seven fundamental movement patterns that comprise the FMS™ are described in detail in Part I: deep squat, hurdle step, and in-line lunge. Part II of this series, which will be published in the August issue of NAJSPT, will provide a brief review of the analysis of fundamental movements, as well a detailed description of the four additional patterns that complement those presented in Part I (to complete the total of seven fundamental movement patterns which comprise the FMS™): shoulder mobility, active straight leg raise, trunk stability push-up, and rotary stability. The intent of this two part series is to introduce the concept of the evaluation of fundamental movements, whether it is the FMS™ system or a different system devised by another clinician. Such a functional assessment should be incorporated into pre-participation screening in order to determine whether the athlete has the essential movements needed to participate in sports activities with a decreased risk of injury. PMID:21522216

Theory-based modifications of an advanced notification letter improves screening for bowel cancer in men: A randomised controlled trial.

PubMed

Zajac, Ian T; Duncan, Amy C; Flight, Ingrid; Wittert, Gary A; Cole, Stephen R; Young, Graeme P; Wilson, Carlene J; Turnbull, Deborah A

2016-09-01

Male participation in screening for bowel cancer is sub-optimal. Theory-based interventions provide a means of improving screening uptake. To test the efficacy of modifying consumer invitation material in line with continuum and stage theories of health behaviour on screening participation. N = 9216 Australian men aged 50-74 years were randomised to one of four trial arms in a 2 × 2 factorial design randomised controlled trial. Participants received either standard invitation material (control group), or combinations of modified advance-notification and invitation letters. A subsample completed baseline and endpoint behavioural surveys. Participants who received the modified advance notification letter were 12% more likely to screen than those who received the standard version (RR = 1.12, χ(2)(1) = 10.38, p = 0.001). The modified invitation letter did not impact screening uptake (RR = 0.97, χ(2)(1) = 0.63, p = 0.424). No significant changes in psychological variables due to the intervention were observed. Modifications to advance notification letters in line with health behaviour theories significantly improves screening uptake in men. Australian New Zealand Clinical Trials Registry: ACTRN12612001122842 https://www.anzctr.org.au/Trial/Registration/TrialReview.aspx?id=362688. Copyright © 2016 Elsevier Ltd. All rights reserved.

High-throughput screening of inorganic compounds for the discovery of novel dielectric and optical materials

DOE PAGES

Petousis, Ioannis; Mrdjenovich, David; Ballouz, Eric; ...

2017-01-31

Dielectrics are an important class of materials that are ubiquitous in modern electronic applications. Even though their properties are important for the performance of devices, the number of compounds with known dielectric constant is on the order of a few hundred. Here, we use Density Functional Perturbation Theory as a way to screen for the dielectric constant and refractive index of materials in a fast and computationally efficient way. Our results constitute the largest dielectric tensors database to date, containing 1,056 compounds. Details regarding the computational methodology and technical validation are presented along with the format of our publicly availablemore » data. In addition, we integrate our dataset with the Materials Project allowing users easy access to material properties. Finally, we explain how our dataset and calculation methodology can be used in the search for novel dielectric compounds.« less

High-throughput screening of inorganic compounds for the discovery of novel dielectric and optical materials

PubMed Central

Petousis, Ioannis; Mrdjenovich, David; Ballouz, Eric; Liu, Miao; Winston, Donald; Chen, Wei; Graf, Tanja; Schladt, Thomas D.; Persson, Kristin A.; Prinz, Fritz B.

2017-01-01

Dielectrics are an important class of materials that are ubiquitous in modern electronic applications. Even though their properties are important for the performance of devices, the number of compounds with known dielectric constant is on the order of a few hundred. Here, we use Density Functional Perturbation Theory as a way to screen for the dielectric constant and refractive index of materials in a fast and computationally efficient way. Our results constitute the largest dielectric tensors database to date, containing 1,056 compounds. Details regarding the computational methodology and technical validation are presented along with the format of our publicly available data. In addition, we integrate our dataset with the Materials Project allowing users easy access to material properties. Finally, we explain how our dataset and calculation methodology can be used in the search for novel dielectric compounds. PMID:28140408

High-throughput screening of inorganic compounds for the discovery of novel dielectric and optical materials.

PubMed

Petousis, Ioannis; Mrdjenovich, David; Ballouz, Eric; Liu, Miao; Winston, Donald; Chen, Wei; Graf, Tanja; Schladt, Thomas D; Persson, Kristin A; Prinz, Fritz B

2017-01-31

Dielectrics are an important class of materials that are ubiquitous in modern electronic applications. Even though their properties are important for the performance of devices, the number of compounds with known dielectric constant is on the order of a few hundred. Here, we use Density Functional Perturbation Theory as a way to screen for the dielectric constant and refractive index of materials in a fast and computationally efficient way. Our results constitute the largest dielectric tensors database to date, containing 1,056 compounds. Details regarding the computational methodology and technical validation are presented along with the format of our publicly available data. In addition, we integrate our dataset with the Materials Project allowing users easy access to material properties. Finally, we explain how our dataset and calculation methodology can be used in the search for novel dielectric compounds.

An efficient descriptor model for designing materials for solar cells

NASA Astrophysics Data System (ADS)

Alharbi, Fahhad H.; Rashkeev, Sergey N.; El-Mellouhi, Fedwa; Lüthi, Hans P.; Tabet, Nouar; Kais, Sabre

2015-11-01

An efficient descriptor model for fast screening of potential materials for solar cell applications is presented. It works for both excitonic and non-excitonic solar cells materials, and in addition to the energy gap it includes the absorption spectrum (α(E)) of the material. The charge transport properties of the explored materials are modelled using the characteristic diffusion length (Ld) determined for the respective family of compounds. The presented model surpasses the widely used Scharber model developed for bulk heterojunction solar cells. Using published experimental data, we show that the presented model is more accurate in predicting the achievable efficiencies. To model both excitonic and non-excitonic systems, two different sets of parameters are used to account for the different modes of operation. The analysis of the presented descriptor model clearly shows the benefit of including α(E) and Ld in view of improved screening results.

SCREENING FOR PSYCHOSOCIAL PROBLEMS IN CHILDREN ATTENDING THE PEDIATRIC CLINIC AT KING KHALID UNIVERSITY HOSPITAL (KKUH) IN RIYADH (KSA)

PubMed Central

Al-Ayed, Ibrahim H.; Al-Haider, Fatimah A.

2008-01-01

Introduction: Psychosocial problems are highly prevalent among children and adolescents. One approach to facilitating recognition and referral of these problems is to use parent-completed screening questionnaire as part of routine primary care. Aim and methods: The purpose of this study was to determine the prevalence and type of psychosocial problems in a random sample of children attending the pediatric clinic at KKUH at the time of the study. A 2-part questionnaire was designed for the study. The first part contained basic biographic data in addition to items which reflect the socioeconomic status of the family. The second part of the questionnaire comprised the inventory, which is a modified version of the Pediatric Symptoms Checklist (PSC).The inventory consisted of 38 items classified into five categories. The total score of the inventory ranged from 0-114. Results: Three-hundred-twelve questionnaires were completed. The average of the total score was only 22.3 out of 114. The lowest score was 0 and the highest 84. The average scores of behavioral symptoms (BS) were the highest (7.03 out of 27) while that of the learning problems (LP) was the lowest (1.5 out of 18). The average score for mood symptoms (MS) was 5.6 out of 24, that for personality characteristics (PC) was 4.5 out of 24 and that for somatic symptoms (SS) was 4.3 out of 24. Conclusion: This study revealed the feasibility of screening for behavioral problems of children in an outpatient setting. It is necessary to implement screening procedures for psycho-behavioral problems, and train pediatricians to screen children presenting at clinics. PMID:23012163

Screening for psychosocial problems in children attending the pediatric clinic at king khalid university hospital (kkuh) in riyadh (ksa).

PubMed

Al-Ayed, Ibrahim H; Al-Haider, Fatimah A

2008-01-01

Psychosocial problems are highly prevalent among children and adolescents. One approach to facilitating recognition and referral of these problems is to use parent-completed screening questionnaire as part of routine primary care. The purpose of this study was to determine the prevalence and type of psychosocial problems in a random sample of children attending the pediatric clinic at KKUH at the time of the study. A 2-part questionnaire was designed for the study. The first part contained basic biographic data in addition to items which reflect the socioeconomic status of the family. The second part of the questionnaire comprised the inventory, which is a modified version of the Pediatric Symptoms Checklist (PSC).The inventory consisted of 38 items classified into five categories. The total score of the inventory ranged from 0-114. Three-hundred-twelve questionnaires were completed. The average of the total score was only 22.3 out of 114. The lowest score was 0 and the highest 84. The average scores of behavioral symptoms (BS) were the highest (7.03 out of 27) while that of the learning problems (LP) was the lowest (1.5 out of 18). The average score for mood symptoms (MS) was 5.6 out of 24, that for personality characteristics (PC) was 4.5 out of 24 and that for somatic symptoms (SS) was 4.3 out of 24. This study revealed the feasibility of screening for behavioral problems of children in an outpatient setting. It is necessary to implement screening procedures for psycho-behavioral problems, and train pediatricians to screen children presenting at clinics.

Estimating the positive predictive value of opportunistic population testing for gonorrhoea as part of the English Chlamydia Screening Programme.

PubMed

Fowler, T; Edeghere, O; Inglis, N; Bradshaw, S

2013-03-01

Advances in technology have raised the possibility of including gonorrhoea testing as part of chlamydia screening. In England this is recommended only where the positive predictive value (PPV) of the test is ≥90%. This study assessed the PPV for gonorrhoea testing using routine testing data. Routine data (including gonorrhoea testing) from the Greater Manchester Chlamydia Screening Programme (GMCSP) in 2009/2010, were used to estimate the PPV for gonorrhoea testing. Of those screened, 0.3% (59/18044) of men and 0.4% (174/41873) of women tested positive for gonorrhoea. The PPV was 82.3% in women and 73.6% in men, in those who also tested positive for chlamydia. For women and men testing negative for chlamydia the PPV for a positive gonorrhoea test was incalculable. The low PPV observed in most groups suggests that where population testing for gonorrhoea occurs there is a need for further confirmatory testing of positive results before treatment decisions are made. Clinicians should be aware of screening test result limitations in this context.

Concerns, perceived need and competing priorities: a qualitative exploration of decision-making and non-participation in a population-based flexible sigmoidoscopy screening programme to prevent colorectal cancer

PubMed Central

Hall, N; Birt, L; Rees, C J; Elliot, S; Ritchie, M; Weller, D; Rubin, G

2016-01-01

Objective Optimising uptake of colorectal cancer (CRC) screening is important to achieve projected health outcomes. Population-based screening by flexible sigmoidoscopy (FS) was introduced in England in 2013 (NHS Bowel scope screening). Little is known about reactions to the invitation to participate in FS screening, as offered within the context of the Bowel scope programme. We aimed to investigate responses to the screening invitation to inform understanding of decision-making, particularly in relation to non-participation in screening. Design Qualitative analysis of semistructured in-depth interviews and written accounts. Participants and setting People from 31 general practices in the North East and East of England invited to attend FS screening as part of NHS Bowel scope screening programme were sent invitations to take part in the study. We purposively sampled interviewees to ensure a range of accounts in terms of beliefs, screening attendance, sex and geographical location. Results 20 screeners and 25 non-screeners were interviewed. Written responses describing reasons for, and circumstances surrounding, non-participation from a further 28 non-screeners were included in the analysis. Thematic analysis identified a range of reactions to the screening invitation, decision-making processes and barriers to participation. These include a perceived or actual lack of need; inability to attend; anxiety and fear about bowel preparation, procedures or hospital; inability or reluctance to self-administer an enema; beliefs about low susceptibility to bowel cancer or treatment and understanding of harm and benefits. The strength, rather than presence, of concerns about the test and perceived need for reassurance were important in the decision to participate for screeners and non-screeners. Decision-making occurs within the context of previous experiences and day-to-day life. Conclusions Understanding the reasons for non-participation in FS screening can help inform strategies to improve uptake and may be transferable to other screening programmes. PMID:27836872

Impact of cardiovascular counseling and screening in Hodgkin lymphoma survivors.

PubMed

Daniëls, Laurien A; Krol, Stijn D G; de Graaf, Michiel A; Scholte, Arthur J H A; van 't Veer, Mars B; Putter, Hein; de Roos, Albert; Schalij, Martin J; van de Poll-Franse, Lonneke V; Creutzberg, Carien L

2014-09-01

Cardiovascular disease (CVD) is the most common nonmalignant cause of death in Hodgkin lymphoma (HL) survivors, especially after mediastinal irradiation. The role of screening for CVD in HL survivors is unclear, but confrontation with risks of CVD may have a negative influence on health-related quality of life (HRQL). As part of a phase 2 screening study using computed tomography angiography (CTA) among HL survivors, an HRQL analysis was done to evaluate the emotional and practical burden and perceived benefits of screening and the effect of CVD-specific counseling on patient satisfaction. Patients who participated in the screening study also took part in the HRQL study. The impact of undergoing screening was evaluated with a 9-item questionnaire, and impact on HRQL with the European Organization for Research and Treatment of Cancer (EORTC) Quality of Life Core Questionnaire C30, version 3.0. The effect of counseling of CVD on perceived provision of information was evaluated with EORTC INFO-25. All questionnaires were completed at baseline and after screening. Baseline questionnaires were received from 48 participants, and 43 completed questionnaires after screening. Mean age was 47 years, and mean time since diagnosis was 21 years. Of the total, 93% of subjects were content with participating, and 80% did not find the emphasis placed on late effects burdensome, although screening did have a small impact on social functioning and global quality of life. Perceived information on disease, medical tests, and treatment increased significantly after screening (P<.01). Differences were clinically relevant. There were no differences in perceived information between patients with and without screen-detected CVD. Screening was evaluated favorably, whether CTA showed abnormalities or not. Extensive counseling resulted in substantially increased provision of information and improved information satisfaction. Screening by means of CTA and subsequent cardiac intervention was highly valued, and the benefits were felt to outweigh the emotional and practical burden. Copyright © 2014 Elsevier Inc. All rights reserved.

Inverse Band Structure Design via Materials Database Screening: Application to Square Planar Thermoelectrics

DOE PAGES

Isaacs, Eric B.; Wolverton, Chris

2018-02-26

Electronic band structure contains a wealth of information on the electronic properties of a solid and is routinely computed. However, the more difficult problem of designing a solid with a desired band structure is an outstanding challenge. In order to address this inverse band structure design problem, we devise an approach using materials database screening with materials attributes based on the constituent elements, nominal electron count, crystal structure, and thermodynamics. Our strategy is tested in the context of thermoelectric materials, for which a targeted band structure containing both flat and dispersive components with respect to crystal momentum is highly desirable.more » We screen for thermodynamically stable or metastable compounds containing d 8 transition metals coordinated by anions in a square planar geometry in order to mimic the properties of recently identified oxide thermoelectrics with such a band structure. In doing so, we identify 157 compounds out of a total of over half a million candidates. After further screening based on electronic band gap and structural anisotropy, we explicitly compute the band structures for the several of the candidates in order to validate the approach. We successfully find two new oxide systems that achieve the targeted band structure. Electronic transport calculations on these two compounds, Ba 2PdO 3 and La 4PdO 7, confirm promising thermoelectric power factor behavior for the compounds. This methodology is easily adapted to other targeted band structures and should be widely applicable to a variety of design problems.« less

Inverse Band Structure Design via Materials Database Screening: Application to Square Planar Thermoelectrics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Isaacs, Eric B.; Wolverton, Chris

Electronic band structure contains a wealth of information on the electronic properties of a solid and is routinely computed. However, the more difficult problem of designing a solid with a desired band structure is an outstanding challenge. In order to address this inverse band structure design problem, we devise an approach using materials database screening with materials attributes based on the constituent elements, nominal electron count, crystal structure, and thermodynamics. Our strategy is tested in the context of thermoelectric materials, for which a targeted band structure containing both flat and dispersive components with respect to crystal momentum is highly desirable.more » We screen for thermodynamically stable or metastable compounds containing d 8 transition metals coordinated by anions in a square planar geometry in order to mimic the properties of recently identified oxide thermoelectrics with such a band structure. In doing so, we identify 157 compounds out of a total of over half a million candidates. After further screening based on electronic band gap and structural anisotropy, we explicitly compute the band structures for the several of the candidates in order to validate the approach. We successfully find two new oxide systems that achieve the targeted band structure. Electronic transport calculations on these two compounds, Ba 2PdO 3 and La 4PdO 7, confirm promising thermoelectric power factor behavior for the compounds. This methodology is easily adapted to other targeted band structures and should be widely applicable to a variety of design problems.« less

Catalog of Audiovisual Materials Related to Rehabilitation.

ERIC Educational Resources Information Center

Mann, Joe, Ed.; Henderson, Jim, Ed.

An annotated listing of a variety of audiovisual formats on content related to the social-rehabilitation process is provided. The materials in the listing were selected from a collection of over 200 audiovisual catalogs. The major portion of the materials has not been screened. The materials are classified alphabetically by the following subject…

Adaptable Holders for Arc-Jet Screening Candidate Thermal Protection System Repair Materials

NASA Technical Reports Server (NTRS)

Riccio, Joe; Milhoan, Jim D.

2010-01-01

Reusable holders have been devised for evaluating high-temperature, plasma-resistant re-entry materials, especially fabrics. Typical material samples tested support thermal-protection-system damage repair requiring evaluation prior to re-entry into terrestrial atmosphere. These tests allow evaluation of each material to withstand the most severe predicted re-entry conditions.

Reproducibility of polycarbonate reference material in toxicity evaluation

NASA Technical Reports Server (NTRS)

Hilado, C. J.; Huttlinger, P. A.

1981-01-01

A specific lot of bisphenol A polycarbonate has been used for almost four years as the reference material for the NASA-USF-PSC toxicity screening test method. The reproducibility of the test results over this period of time indicate that certain plastics may be more suitable reference materials than the more traditional cellulosic materials.

Materials selection for long life in LEO: A critical evaluation of atomic oxygen testing with thermal atom systems

NASA Technical Reports Server (NTRS)

Koontz, S. L.; Kuminecz, J.; Leger, L.; Nordine, P.

1988-01-01

The use of thermal atom test methods as a materials selection and screening technique for low-Earth orbit (LEO) spacecraft is critically evaluated. The chemistry and physics of thermal atom environments are compared with the LEO environment. The relative reactivities of a number of materials determined to be in thermal atom environments are compared to those observed in LEO and in high quality LEO simulations. Reaction efficiencies measured in a new type of thermal atom apparatus are one-hundredth to one-thousandth those observed in LEO, and many materials showing nearly identical reactivities in LEO show relative reactivities differing by as much as a factor of 8 in thermal atom systems. A simple phenomenological kinetic model for the reaction of oxygen atoms with organic materials can be used to explain the differences in reactivity in different environments. Certain specific thermal test environments can be used as reliable materials screening tools. Using thermal atom methods to predict material lifetime in LEO requires direct calibration of the method against LEO data or high quality simulation data for each material.

Screening of Critical Genes and MicroRNAs in Blood Samples of Patients with Ruptured Intracranial Aneurysms by Bioinformatic Analysis of Gene Expression Data.

PubMed

Bo, Lijuan; Wei, Bo; Wang, Zhanfeng; Kong, Daliang; Gao, Zheng; Miao, Zhuang

2017-09-20

BACKGROUND This study aimed to identify more potential genes and miRNAs associated with the pathogenesis of intracranial aneurysms (IAs). MATERIAL AND METHODS The dataset of GSE36791 (accession number) was downloaded from the Gene Expression Omnibus database. Differentially expressed genes (DEGs) were screened for in the blood samples from patients with ruptured IAs and controls, followed by functional and pathway enrichment analyses. In addition, gene co-expression network was constructed and significant modules were extracted from the network by WGCNA R package. Screening for miRNAs that could regulate DEGs in the modules was performed and an analysis of regulatory relationships was conducted. RESULTS A total of 304 DEGs (167 up-regulated and 137 down-regulated genes) were screened for in blood samples from patients with ruptured IAs compared with those from controls. Functional enrichment analysis showed that the up-regulated genes were mainly associated with immune response and the down-regulated DEGs were mainly concerned with the structure of ribosome and translation. Besides, six functional modules were significantly identified, including four modules enriched by up-regulated genes and two modules enriched by down-regulated genes. Thereinto, the blue, yellow, and turquoise modules of up-regulated genes were all linked with immune response. Additionally, 16 miRNAs were predicted to regulate DEGs in the three modules associated with immune response, such as hsa-miR-1304, hsa-miR-33b, hsa-miR-125b, and hsa-miR-125a-5p. CONCLUSIONS Several genes and miRNAs (such as miR-1304, miR-33b, IRS2 and KCNJ2) may take part in the pathogenesis of IAs.

7 CFR 996.31 - Outgoing quality standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... materials(percent) Moisture(percent) Excluding Lots of “splits” Runner 1.50 2.50 6.00%; 17/64 inch round screen .20 9.00 Virginia (except No. 2) 1.50 2.50 6.00%; 17/64 inch round screen .20 9.00 Spanish and Valencia 1.50 2.50 6.00%; 16/64 inch round screen .20 9.00 No. 2 Virginia 1.50 3.00 6.00%; 17/64 inch round...

7 CFR 996.31 - Outgoing quality standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... materials(percent) Moisture(percent) Excluding Lots of “splits” Runner 1.50 2.50 6.00%; 17/64 inch round screen .20 9.00 Virginia (except No. 2) 1.50 2.50 6.00%; 17/64 inch round screen .20 9.00 Spanish and Valencia 1.50 2.50 6.00%; 16/64 inch round screen .20 9.00 No. 2 Virginia 1.50 3.00 6.00%; 17/64 inch round...

7 CFR 996.31 - Outgoing quality standards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... materials(percent) Moisture(percent) Excluding Lots of “splits” Runner 1.50 2.50 6.00%; 17/64 inch round screen .20 9.00 Virginia (except No. 2) 1.50 2.50 6.00%; 17/64 inch round screen .20 9.00 Spanish and Valencia 1.50 2.50 6.00%; 16/64 inch round screen .20 9.00 No. 2 Virginia 1.50 3.00 6.00%; 17/64 inch round...

Experiences issues with plastic parts at cold temperatures

NASA Technical Reports Server (NTRS)

Sandor, Mike; Agarwal, Shri

2005-01-01

Missions to MARS/planets/asteroids require electronic parts to operate and survive at extreme cold conditions. At extreme cold temperatures many types of cold related failures can occur. Office 514 is currently evaluating plastic parts under various cold temperature conditions and applications. Evaluations, screens, and qualifications are conducted on flight parts.

Detecting Developmental Neurotoxicants Using Zebrafish Embryos

EPA Science Inventory

As part of EPA’s program on the screening and prioritization of chemicals for developmental neurotoxicity, a rapid, cost-effective in vivo vertebrate screen is being developed using an alternative species approach. Zebrafish (Danio rerio), a small freshwater fish with external f...

Comparison of 4 recruiting strategies in a smoking cessation trial.

PubMed

Buller, David B; Meenan, Richard; Severson, Herb; Halperin, Abigail; Edwards, Erika; Magnusson, Brooke

2012-09-01

To compare 4 online and off-line recruiting methods. Young adult smokers (n=3353) were recruited to a trial comparing smoking cessation services with an online health risk assessment (HRA), online ads, offline materials, and quit-line screening. Online ads (n=1426; $41.35) and off-line materials recruited the most smokers (n=1341; $56.23) for the lowest cost. Quitline screening was more expensive (n=189; $132.22), but enrollees used cessation services the most (34%-82%). Online HRA was least successful and most costly (n=397; $630.85) but had the highest follow-up (45%-55%). Online ads and off-line materials were most effective and cost-effective methods.

Method of handling radioactive alkali metal waste

DOEpatents

Wolson, Raymond D.; McPheeters, Charles C.

1980-01-01

Radioactive alkali metal is mixed with particulate silica in a rotary drum reactor in which the alkali metal is converted to the monoxide during rotation of the reactor to produce particulate silica coated with the alkali metal monoxide suitable as a feed material to make a glass for storing radioactive material. Silica particles, the majority of which pass through a 95 mesh screen or preferably through a 200 mesh screen, are employed in this process, and the preferred weight ratio of silica to alkali metal is 7 to 1 in order to produce a feed material for the final glass product having a silica to alkali metal monoxide ratio of about 5 to 1.

Method of handling radioactive alkali metal waste

DOEpatents

Wolson, R.D.; McPheeters, C.C.

Radioactive alkali metal is mixed with particulate silica in a rotary drum reactor in which the alkali metal is converted to the monoxide during rotation of the reactor to produce particulate silica coated with the alkali metal monoxide suitable as a feed material to make a glass for storing radioactive material. Silica particles, the majority of which pass through a 95 mesh screen or preferably through a 200 mesh screen, are employed in this process, and the preferred weight ratio of silica to alkali metal is 7 to 1 in order to produce a feed material for the final glass product having a silica to alkali metal monoxide ratio of about 5 to 1.

Value of audits in breast cancer screening quality assurance programmes.

PubMed

Geertse, Tanya D; Holland, Roland; Timmers, Janine M H; Paap, Ellen; Pijnappel, Ruud M; Broeders, Mireille J M; den Heeten, Gerard J

2015-11-01

Our aim was to retrospectively evaluate the results of all audits performed in the past and to assess their value in the quality assurance of the Dutch breast cancer screening programme. The audit team of the Dutch Reference Centre for Screening (LRCB) conducts triennial audits of all 17 reading units. During audits, screening outcomes like recall rates and detection rates are assessed and a radiological review is performed. This study investigates and compares the results of four audit series: 1996-2000, 2001-2005, 2003-2007 and 2010-2013. The analysis shows increased recall rates (from 0.66%, 1.07%, 1.22% to 1.58%), increased detection rates (from 3.3, 4.5, 4.8 to 5.4 per 1000) and increased sensitivity (from 64.5%, 68.7%, 70.5% to 71.6%), over the four audit series. The percentage of 'missed cancers' among interval cancers and advanced screen-detected cancers did not change (p = 0.4). Our audits not only provide an opportunity for assessing screening outcomes, but also provide moments of self-reflection with peers. For radiologists, an accurate understanding of their performance is essential to identify points of improvement. We therefore recommend a radiological review of screening examinations and immediate feedback as part of an audit. • Radiological review and immediate feedback are recommended as part of an audit. • For breast screening radiologists, audits provide moments of self-reflection with peers. • Radiological review of screening examinations provides insights in recall behaviour. • Accurate understanding of radiologists' performance is essential to identify points of improvement.

Feasibility of Screening Patients With Nonpsychiatric Complaints for Suicide Risk in a Pediatric Emergency Department

PubMed Central

Horowitz, Lisa; Ballard, Elizabeth; Teach, Stephen J.; Bosk, Abigail; Rosenstein, Donald L.; Joshi, Paramjit; Dalton, Marc E.; Pao, Maryland

2012-01-01

Objective Screening children for suicide risk when they present to the emergency department (ED) with nonpsychiatric complaints could lead to better identification and treatment of high-risk youth. Before suicide screening protocols can be implemented for nonpsychiatric patients in pediatric EDs, it is essential to determine whether such efforts are feasible. Methods As part of an instrument validation study, ED patients (10–21 years old) with both psychiatric and nonpsychiatric presenting complaints were recruited to take part in suicide screening. Clinically significant suicidal thoughts, as measured by the Suicidal Ideation Questionnaire, and suicidal behaviors were assessed, as well as patient opinions about suicide screening. Recruitment rates for the study as well as impact on length of stay were assessed. Results Of the 266 patients and parents approached for the study, 159 (60%) agreed to participate. For patients entering the ED for nonpsychiatric reasons (n = 106), 5.7% (n = 6) reported previous suicidal behavior, and 5.7% (n = 6) reported clinically significant suicidal ideation. There were no significant differences for mean length of stay in the ED for nonpsychiatric patients with positive triggers and those who screened negative (means, 382 [SD, 198] and 393 [SD, 166] minutes, respectively; P = 0.80). Ninety-six percent of participants agreed that suicide screening should occur in the ED. Conclusions Suicide screening of nonpsychiatric patients in the ED is feasible in terms of acceptability to parents, prevalence of suicidal thoughts and behaviors, practicality to ED flow, and patient opinion. Future endeavors should address brief screening tools validated on nonpsychiatric populations. PMID:20944511

Rapid detection of aflatoxin B1 in medicinal materials of radix and rhizome by gold immunochromatographic assay.

PubMed

Hu, Shurong; Dou, Xiaowen; Zhang, Lei; Xie, Yanjun; Yang, Shihai; Yang, Meihua

2018-05-22

A rapid screening of the most toxic aflatoxin B 1 (AFB 1 ) in medicinal materials of radix and rhizome was performed by an immune chromatography method for the first time. The colloidal gold immunochromatographic strip was prepared after optimization of the conjugation of gold particles with monoclonal antibody, the test line and the control line. Under optimized conditions, the detection limit of the constructed test strip was as low as 0.1 ng mL -1 and the total analysis was conducted within 15 min by naked eyes. Four kinds of medicinal materials (Gastrodia elata, Poria cocos, Bletilla striata and Radix Angelicae Dahuricae) were investigated by the strip. Various complex matrixes pay a significant influence on the feasibility and effectiveness of the strip screening in medicinal materials. Aiming to the characteristics of selected medicinal materials, the screening was successfully proceeded with extraction by 70% methanol-water as well as three-fold dilution in Gastrodia elata and Radix Angelicae Dahuricae, 70% methanol-PBS as well as four-fold dilution in Poria cocos., and 60% methanol-water as well as four-fold dilution in Bletilla striata. Among the collected 40 samples, one was found to be positive of AFB 1 with level above 5 μg kg -1 . The result was in a good agreement with those obtained from LC-MS/MS determination (6.12 μg kg -1 ). The gold immunochromatographic strip was demonstrated as a rapid, cost-effective, reliable and on-site screening technique for mycotoxins in starch and polysaccharides-rich herbal medicines. Copyright © 2018 Elsevier Ltd. All rights reserved.

21 CFR 862.1660 - Quality control material (assayed and unassayed).

Code of Federal Regulations, 2010 CFR

2010-04-01

... includes controls (assayed and unassayed) for blood gases, electrolytes, enzymes, multianalytes (all kinds...). Except when used in donor screening tests, unassayed material is exempt from the premarket notification...

Screening for Traumatic Experiences and Mental Health Distress Among Women in HIV Care in Cape Town, South Africa.

PubMed

Yemeke, Tatenda T; Sikkema, Kathleen J; Watt, Melissa H; Ciya, Nonceba; Robertson, Corne; Joska, John A

2017-07-01

Traumatic events can negatively affect clinical outcomes among HIV positive women, particularly when those events result in ongoing psychological distress. Consequently, there have been calls to integrate screening and treatment of traumatic experiences and associated mental health disorders into HIV care. In South Africa, screening for traumatic experiences and mental health is not a routine part of HIV care. The goal of this study was to examine the prevalence of traumatic experiences and mental health distress among women in an HIV clinic in Cape Town, South Africa, and to explore the acceptability of routine screening in this setting. Seventy HIV positive women were screened following referral from health care workers in the clinic. Among the participants, 51% reported a history of sexual abuse and 75% reported physical intimate partner violence (physical IPV). Among all participants, 36% met screening criteria for depression; among those with traumatic experiences ( n = 57), 70% met screening criteria for posttraumatic stress disorder (PTSD). Compared with reporting no sexual abuse or physical IPV, having experienced both sexual abuse and physical IPV was significantly associated with higher odds of depression, while reporting either sexual abuse or physical IPV individually was not significantly associated with increased odds of depression. Among women reporting sexual abuse, 61% were disclosing their experience for the first time during the screening; 31% of women with physical IPV experience were disclosing for the first time. Overall, 98% of participants thought screening should be routine and extended to all women as part of clinic care. Screening women for sexual abuse and physical IPV may be an important component of ensuring HIV care engagement.

Differences in perceived difficulty in print and online patient education materials.

PubMed

Farnsworth, Michael

2014-01-01

Written patient education materials frequently exceed the reading ability of the general public. Patients are often intimidated by the task of reading patient education materials, perceiving the materials’ difficulty levels as prohibitive, even when they do not exceed the patients’ reading abilities. It is unclear how the delivery mechanism--print or a computer screen--affects a patient’s reading experience through his/her perception of its difficulty. To determine whether first-year college students perceived online or print-based patient education materials as more difficult to read. Convenience sampling of first-year college students. Some first-year college students perceived online patient education materials to be more difficult to read than print-based ones--even when the reading level of the patient education materials was similar. Demographic information about this sample’s high levels of digital literacy suggests that other populations might also perceive online patient education materials as more difficult to read than print-based equivalents. Patients’ perceptions of the difficulty of patient education materials influenced their ability to effectively learn from those materials. This article concludes with a call for more research into patients’ perceptions of difficulty of patient education materials in print vs on a screen.

Materials selection for long life in low earth orbit - A critical evaluation of atomic oxygen testing with thermal atom systems

NASA Technical Reports Server (NTRS)

Koontz, S. L.; Albyn, K.; Leger, L.

1990-01-01

The use of thermal atom test methods as a materials selection and screening technique for low-earth orbit (LEO) spacecraft is critically evaluated. The chemistry and physics of thermal atom environments are compared with the LEO environment. The relative reactivities of a number of materials determined in thermal atom environments are compared with those observed in LEO and in high-quality LEO simulations. Reaction efficiencies (cu cm/atom) measured in a new type of thermal atom apparatus are one-thousandth to one ten-thousandth those observed in LEO, and many materials showing nearly identical reactivities in LEO show relative reactivities differing by as much as a factor of eight in thermal atom systems. A simple phenomenological kinetic model for the reaction of oxygen atoms with organic materials can be used to explain the differences in reactivity in different environments. Certain speciic thermal atom test environments can be used as reliable materials screening tools.

The Effect of 3D Hydrogel Scaffold Modulus on Osteoblast Differentiation and Mineralization Revealed by Combinatorial Screening

PubMed Central

Chatterjee, Kaushik; Lin-Gibson, Sheng; Wallace, William E.; Parekh, Sapun H.; Lee, Young J.; Cicerone, Marcus T.; Young, Marian F.; Simon, Carl G.

2011-01-01

Cells are known to sense and respond to the physical properties of their environment and those of tissue scaffolds. Optimizing these cell-material interactions is critical in tissue engineering. In this work, a simple and inexpensive combinatorial platform was developed to rapidly screen three-dimensional (3D) tissue scaffolds and was applied to screen the effect of scaffold properties for tissue engineering of bone. Differentiation of osteoblasts was examined in poly(ethylene glycol) hydrogel gradients spanning a 30-fold range in compressive modulus (≈ 10 kPa to ≈ 300 kPa). Results demonstrate that material properties (gel stiffness) of scaffolds can be leveraged to induce cell differentiation in 3D culture as an alternative to biochemical cues such as soluble supplements, immobilized biomolecules and vectors, which are often expensive, labile and potentially carcinogenic. Gel moduli of ≈ 225 kPa and higher enhanced osteogenesis. Furthermore, it is proposed that material-induced cell differentiation can be modulated to engineer seamless tissue interfaces between mineralized bone tissue and softer tissues such as ligaments and tendons. This work presents a combinatorial method to screen biological response to 3D hydrogel scaffolds that more closely mimics the 3D environment experienced by cells in vivo. PMID:20378163

Regional hydrogeological screening characteristics used for siting near-surface waste-disposal facilities in Oklahoma, U.S.A.

USGS Publications Warehouse

Johnson, K.S.

1991-01-01

The Oklahoma Geological Survey has developed several maps and reports for preliminary screening of the state of Oklahoma to identify areas that are generally acceptable or unacceptable for disposal of a wide variety of waste materials. These maps and reports focus on the geologic and hydrogeologic parameters that must be evaluated in the screening process. One map (and report) shows the outcrop distribution of 35 thick shale or clay units that are generally suitable for use as host rocks for surface disposal of wastes. A second map shows the distribution of unconsolidated alluvial and terrace-deposit aquifers, and a third map shows the distribution and hydrologic character of bedrock aquifers and their recharge areas. These latter two maps show the areas in the state where special attention must be exercised in permitting storage or disposal of waste materials that could degrade the quality of groundwater. State regulatory agencies and industry are using these maps and reports in preliminary screening of the state to identify potential disposal sites. These maps in no way replace the need for site-specific investigations to prove (or disprove) the adequacy of a site to safely contain waste materials. ?? 1991 Springer-Verlag New York Inc.

Effect of Surge Current Testing on Reliability of Solid Tantalum Capacitors

NASA Technical Reports Server (NTRS)

Teverovsky, Alexander

2008-01-01

Tantalum capacitors manufactured per military specifications are established reliability components and have less than 0.001% of failures per 1000 hours for grades D or S, thus positioning these parts among electronic components with the highest reliability characteristics. Still, failures of tantalum capacitors do happen and when it occurs it might have catastrophic consequences for the system. To reduce this risk, further development of a screening and qualification system with special attention to the possible deficiencies in the existing procedures is necessary. The purpose of this work is evaluation of the effect of surge current stress testing on reliability of the parts at both steady-state and multiple surge current stress conditions. In order to reveal possible degradation and precipitate more failures, various part types were tested and stressed in the range of voltage and temperature conditions exceeding the specified limits. A model to estimate the probability of post-surge current testing-screening failures and measures to improve the effectiveness of the screening process has been suggested.

Unsupervised self-testing as part public health screening for HIV in resource-poor environments: some ethical considerations.

PubMed

Scott, P Anne

2014-07-01

The use of unsupervised self-testing as part of a national screening program for HIV infection in resource-poor environments with high HIV prevalence may have a number of attractive aspects, such as increasing access to services for hard to reach and isolated populations. However, the presence of such technologies is at a relatively early stage in terms of use and impact in the field. In this paper, a principle-based approach, that recognizes the fundamentally utilitarian nature of public health combined with a focus on autonomy, is used as a lens to explore some of the ethical issues raised by HIV self-testing. The conclusion reached in this review is that at this point in time, on the basis of the principles of utility and respect for autonomy, it is not ethically appropriate to incorporate unsupervised HIV self-testing as part of a public health screening program in resource-poor environments.

Quantification of Sesquiterpene Lactones in Asteraceae Plant Extracts: Evaluation of their Allergenic Potential

PubMed Central

Salapovic, Helena; Geier, Johannes; Reznicek, Gottfried

2013-01-01

Sesquiterpene lactones (SLs), mainly those with an activated exocyclic methylene group, are important allergens in Asteraceae (Compositae) plants. As a screening tool, the Compositae mix, consisting of five Asteraceae plant extracts with allergenic potential (feverfew, tansy, arnica, yarrow, and German chamomile) is part of several national patch test baseline series. However, the SL content of the Compositae mix may vary due to the source material. Therefore, a simple spectrophotometric method for the quantitative measurement of SLs with the α-methylene-γ-butyrolactone moiety was developed, giving the percentage of allergenic compounds in plant extracts. The method has been validated and five Asteraceae extracts, namely feverfew (Tanacetum parthenium L.), tansy (Tanacetum vulgare L.), arnica (Arnica montana L.), yarrow (Achillea millefolium L.), and German chamomile (Chamomilla recutita L. Rauschert) that have been used in routine patch test screening were evaluated. A good correlation could be found between the results obtained using the proposed spectrophotometric method and the corresponding clinical results. Thus, the introduced method is a valuable tool for evaluating the allergenic potential and for the simple and efficient quality control of plant extracts with allergenic potential. PMID:24106675

Toxicological assessment of green petroleum coke.

PubMed

McKee, Richard H; Herron, Deborah; Beatty, Patrick; Podhasky, Paula; Hoffman, Gary M; Swigert, James; Lee, Carol; Wong, Diana

2014-01-01

Green petroleum coke is primarily inorganic carbon with some entrained volatile hydrocarbon material. As part of the petroleum industry response to the high production volume challenge program, the potential for reproductive effects was assessed in a subchronic toxicity/reproductive toxicity screening test in rats (OECD 421). The repeated-dose portion of the study provided evidence for dust accumulation and inflammatory responses in rats exposed to 100 and 300 mg/m(3) but there were no effects at 30 mg/m(3). In the reproductive toxicity screen, the frequency of successful matings was reduced in the high exposure group (300 mg/m(3)) and was not significantly different from control values but was outside the historical experience of the laboratory. The postnatal observations (external macroscopic examination, body weight, and survival) did not indicate any treatment-related differences. Additional tests conducted to assess the potential hazards to aquatic (fish, invertebrates, and algae) and soil dwelling organisms (earthworms and vascular plants) showed few effects at the maximum loading rates of 1000 mg coke/L in aquatic studies and 1000 mg coke/kg soil in terrestrial studies. The only statistically significant finding was an inhibition of algal growth measured as either biomass or growth rate.

Screening and formulation of chemoattractant coatings for artificial reef structures.

PubMed

Lee, Han Seong; Sidharthan, M; Shim, Cheol Soo; Kim, Young Do; Lim, Chi Young; Ko, J W; Han, Man Deuk; Rang, Maeng Joo; Bim, Lee Sae; Cho, Hwan Sung; Shin, H W

2008-07-01

This study was carried out to augment the colonization of marine benthic communities on artificial reef structure. Increasing marine pollution along with various natural hazards cause severe damages to marine algae and associated fauna. In recent years, artificial reefs have been deployed in coastal regions of several parts of the world in order to increase the marine productivity. They are mainly built with concrete materials, however their leachates have considerable impacts on algae. Therefore to increase the algal colonization five chemoattractants such as ferrous sulfate, zinc oxide, ammonium nitrate, sodium phosphate and ferrous lactate were screened against spores of a fouling alga, Ulva pertusa. FeSO4 / ZnO (8:2) and ferrous lactate coatings showed the highest spore attachment with 52 +/- 5.2 cm2 and 79.5 +/- 10.2 cm2 spores respectively (p<0.01). Furthermore using these chemoattractants, coating formulations were made and their performances were investigated at East coast (Ayajin harbor) and South coast (Meejo harbor) of Korea. A maximum fouling coverage (with green algae 25%, red algae 11.3% and brown algae 63.7%) was estimated from ferrous lactate coatings (p<0.01). Different composition of coating formulations and their chemoattractive properties were evaluated.

DEVELOPING SOIL SCREENING LEVELS FOR SOIL INVERTEBRATES AND PLANTS

EPA Science Inventory

U.S. Environmental Protection Agency (USEPA), as part of a collaborative effort among USEPA, DoD, DOE, states, universities and industry, is developing Ecological Screening Levels (Eco-SSLs) for approximately 24 of the most common contaminants founrd at Superfund sites. Eco-SSLs ...

Cervical Cancer Screening

MedlinePlus

... Cancer found early may be easier to treat. Cervical cancer screening is usually part of a woman's health checkup. There are two types of tests: the Pap test and the HPV test. For both, the doctor or nurse collects cells from the surface of the cervix. With the ...

A study of characteristics of a reliable and practical breath alcohol screening test. Part A

DOT National Transportation Integrated Search

1975-08-01

The objectives of this study were (1) to investigate several commercially available breath-alcohol screening test devices of the length-of-stain type, under standardized laboratory conditions, with respect to their ability satisfactorily to detect an...

Ergonomic risk assessment with DesignCheck to evaluate assembly work in different phases of the vehicle development process.

PubMed

Winter, Gabriele; Schaub, Karlheinz G; Großmann, Kay; Laun, Gerhard; Landau, Kurt; Bruder, Ralph

2012-01-01

Occupational hazards exist, if the design of the work situation is not in accordance with ergonomic design principles. At assembly lines ergonomics is applied to the design of work equipment and tasks and to work organisation. The ignoring of ergonomic principles in planning and design of assembly work leads to unfavourable working posture, action force and material handling. Disorders of the musculoskeletal system are of a common occurrence throughout Europe. Musculoskeletal disorders are a challenge against the background of disabled workers. The changes in a worker's capability have to be regarded in the conception of redesigned and new assembly lines. In this way ergonomics becomes progressively more important in planning and design of vehicles: The objective of ergonomic design in different stages of the vehicles development process is to achieve an optimal adaptation of the assembly work to workers. Hence the ergonomic screening tool "Design Check" (DC) was developed to identify ergonomic deficits in workplace layouts. The screening-tool is based on the current ergonomic state of the art in the design of physical work and relevant EU legal requirements. It was tested within a federal German research project at selected work stations at the assembly lines at Dr.-Ing. h.c. F. Porsche AG / Stuttgart. Meanwhile the application of the screening-tool DC is transferred in other parts of the Porsche AG, Stuttgart. It is also realized as an ergonomic standard method to perform assembly work in different phases of the vehicle development process.

Quantum cascade laser-based screening portal for the detection of explosive precursors

NASA Astrophysics Data System (ADS)

Lindley, Ruth; Normand, Erwan; Howieson, Iain; McCulloch, Michael; Black, Paul; Lewis, Colin; Foulger, Brian

2007-10-01

In recent years, quantum cascade lasers (QCL) have been proven in robust, high-performance gas analyzers designed for continuous emission monitoring (CEM) in harsh environments. In 2006, Cascade Technologies reported progress towards adapting its patented technology for homeland security applications by publishing initial results on explosive compound detection. This paper presents the performance and results from a QCL-based people screening portal developed during the past year and aimed at the detection of precursors used in the make up of improvised explosive devices (IED). System tests have been carried out on a large number of potential interferents, together with target precursor materials, reinforcing original assumptions that compound fingerprinting can be effectively demonstrated using this technique. Results have shown that an extremely high degree of specificity can be achieved with a sub-second response time. Furthermore, it has been shown that unambiguous precursor signature recognition can be extended to compound mixtures associated with the intermediate stages in the make up of IEDs, whilst maintaining interferent immunity. The portal sensitivity was configured for parts per billion (ppb) detection level thresholds, but is currently being reconfigured for sub-ppb detection. In summary, the results obtained from the QCL based portal indicate that development of a low cost detection system, with enhanced features such as low false positive and high throughput screening of individuals or items, is possible. Development and testing was carried out with the support of the UK government.

Multiple Strategies for Spatial Integration of 2D Layouts within Working Memory

PubMed Central

Meilinger, Tobias; Watanabe, Katsumi

2016-01-01

Prior results on the spatial integration of layouts within a room differed regarding the reference frame that participants used for integration. We asked whether these differences also occur when integrating 2D screen views and, if so, what the reasons for this might be. In four experiments we showed that integrating reference frames varied as a function of task familiarity combined with processing time, cues for spatial transformation, and information about action requirements paralleling results in the 3D case. Participants saw part of an object layout in screen 1, another part in screen 2, and reacted on the integrated layout in screen 3. Layout presentations between two screens coincided or differed in orientation. Aligning misaligned screens for integration is known to increase errors/latencies. The error/latency pattern was thus indicative of the reference frame used for integration. We showed that task familiarity combined with self-paced learning, visual updating, and knowing from where to act prioritized the integration within the reference frame of the initial presentation, which was updated later, and from where participants acted respectively. Participants also heavily relied on layout intrinsic frames. The results show how humans flexibly adjust their integration strategy to a wide variety of conditions. PMID:27101011

Some possible reference materials for fire toxicity tests

NASA Technical Reports Server (NTRS)

Hilado, C. J.; Solis, A. N.

1977-01-01

Suitable reference materials need to be selected in order to standardize any test method. The evaluation of cotton, polyethylene, polyether sulfone, polycarbonate, polystyrene, and polyurethane flexible and rigid foams as possible reference materials for the University of San Francisco/NASA toxicity screening test method is discussed.

Computational designing and screening of solid materials for CO2capture

NASA Astrophysics Data System (ADS)

Duan, Yuhua

In this presentation, we will update our progress on computational designing and screening of solid materials for CO2 capture. By combining thermodynamic database mining with first principles density functional theory and phonon lattice dynamics calculations, a theoretical screening methodology to identify the most promising CO2 sorbent candidates from the vast array of possible solid materials have been proposed and validated at NETL. The advantage of this method is that it identifies the thermodynamic properties of the CO2 capture reaction as a function of temperature and pressure without any experimental input beyond crystallographic structural information of the solid phases involved. The calculated thermodynamic properties of different classes of solid materials versus temperature and pressure changes were further used to evaluate the equilibrium properties for the CO2 adsorption/desorption cycles. According to the requirements imposed by the pre- and post- combustion technologies and based on our calculated thermodynamic properties for the CO2 capture reactions by the solids of interest, we were able to identify only those solid materials for which lower capture energy costs are expected at the desired working conditions. In addition, we present a simulation scheme to increase and decrease the turnover temperature (Tt) of solid capturing CO2 reaction by mixing other solids. Our results also show that some solid sorbents can serve as bi-functional materials: CO2 sorbent and CO oxidation catalyst. Such dual functionality could be used for removing both CO and CO2 after water-gas-shift to obtain pure H2.

40 CFR 60.671 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... washing process which is designed and operated at all times such that the product is saturated with water. ... series of idlers and routed around a pulley at each end. Bucket elevator means a conveying device of... (screens) in series, and retaining oversize material on the mesh surfaces (screens). Grizzly feeders...

40 CFR 60.671 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... washing process which is designed and operated at all times such that the product is saturated with water. ... series of idlers and routed around a pulley at each end. Bucket elevator means a conveying device of... (screens) in series, and retaining oversize material on the mesh surfaces (screens). Grizzly feeders...

40 CFR 60.671 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... washing process which is designed and operated at all times such that the product is saturated with water. ... series of idlers and routed around a pulley at each end. Bucket elevator means a conveying device of... (screens) in series, and retaining oversize material on the mesh surfaces (screens). Grizzly feeders...

40 CFR 60.671 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... washing process which is designed and operated at all times such that the product is saturated with water. ... series of idlers and routed around a pulley at each end. Bucket elevator means a conveying device of... (screens) in series, and retaining oversize material on the mesh surfaces (screens). Grizzly feeders...

40 CFR 60.671 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... washing process which is designed and operated at all times such that the product is saturated with water. ... series of idlers and routed around a pulley at each end. Bucket elevator means a conveying device of... (screens) in series, and retaining oversize material on the mesh surfaces (screens). Grizzly feeders...

Determining knowledge and behaviour change after nutrition screening among older adults.

PubMed

Southgate, Katherine M; Keller, Heather H; Reimer, Holly D

2010-01-01

Two education interventions involving personalized messages after nutrition screening in older adults were compared to determine changes in nutrition knowledge and risk behaviour. Of 150 older adults randomly selected from a local seniors' centre, 61 completed baseline screening and a demographic and nutrition knowledge questionnaire and were randomized to one of two groups. Group A received personalized letters plus an educational booklet, and Group B received personalized letters only. All materials were sent through the mail. Forty-four participants completed post-test questionnaires to determine change in knowledge and risk behaviour. Both groups had reduced nutrition risk scores and increased knowledge scores at post-test. After the intervention, a significant difference was observed in knowledge change by treatment group. Group A participants experienced greater gains in knowledge, with a mean gain of 5.43 points, than did those in Group B, who had a mean gain of 1.36 points (p=0.018). Screening and education with print materials have the potential to change risk behaviour and nutrition knowledge in older adults. A specially designed booklet on older adults' nutrition risk factors plus a personalized letter provide an effective education strategy for older adults after screening.

Part 2: Screening, Brief Intervention and Referral to Treatment Plus Recovery Management: A Proposed Model for Recovery-Oriented Primary Care.

PubMed

Fornili, Katherine S

2016-01-01

Part 1 of this two-part series (The Theoretical Basis for Recovery-Oriented Management of Substance Use Disorders in the Primary Care) explored the theoretical foundations for evidence-based substance Screening, Brief Intervention and Referral to Treatment (SBIRT) services. The aim was to produce possible explanations for why traditional SBIRT works well for individuals with unhealthy alcohol use but not as well for individuals who have more serious substance use disorders, including drug use and alcohol/drug dependence. Building on that analysis, through meaningful application of recovery management (RM) concepts within an integrated primary care/behavioral health context, a new, theory-based, recovery-oriented framework for primary care SBIRT is now introduced in Part 2. The proposed SBIRT Plus Recovery Management (SBIRT + RM) model moves traditional SBIRT from its original, limited, and narrow focus only on substance detection, brief intervention, and referral to its rightful, structured placement within a comprehensive, multidimensional, recovery-oriented system of care clinical practice environment. SBIRT+RM describes relevant strategies for improving recovery outcomes for individuals identified through primary care substance screening and defines primary care provider roles and responsibilities for sustained recovery support and long-term recovery maintenance.

Our experiences with development of digitised video streams and their use in animal-free medical education.

PubMed

Cervinka, Miroslav; Cervinková, Zuzana; Novák, Jan; Spicák, Jan; Rudolf, Emil; Peychl, Jan

2004-06-01

Alternatives and their teaching are an essential part of the curricula at the Faculty of Medicine. Dynamic screen-based video recordings are the most important type of alternative models employed for teaching purposes. Currently, the majority of teaching materials for this purpose are based on PowerPoint presentations, which are very popular because of their high versatility and visual impact. Furthermore, current developments in the field of image capturing devices and software enable the use of digitised video streams, tailored precisely to the specific situation. Here, we demonstrate that with reasonable financial resources, it is possible to prepare video sequences and to introduce them into the PowerPoint presentation, thereby shaping the teaching process according to individual students' needs and specificities.

Screening study for evaluation of the potential for system 80+ to consume excess plutonium - Volume 1. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-04-30

As part of the U.S. effort to evaluate technologies offering solutions for the safe disposal or utilization of surplus nuclear materials, the fiscal year 1993 Energy and Water Appropriations legislation provided the Department of Energy (DOE) the necessary funds to conduct multi-phased studies to determine the technical feasibility of using reactor technologies for the triple mission of burning weapons grade plutonium, producing tritium for the existing smaller weapons stockpile, and generating commercial electricity. DOE limited the studies to five advanced reactor designs. Among the technologies selected is the ABB-Combustion Engineering (ABB-CE) System 80+. The DOE study, currently in Phase ID,more » is proceeding with a more detailed evaluation of the design`s capability for plutonium disposition.« less

A randomized controlled trial of a multicomponent, targeted, low-literacy educational intervention compared with a nontargeted intervention to boost colorectal cancer screening with fecal immunochemical testing in community clinics.

PubMed

Davis, Stacy N; Christy, Shannon M; Chavarria, Enmanuel A; Abdulla, Rania; Sutton, Steven K; Schmidt, Alyssa R; Vadaparampil, Susan T; Quinn, Gwendolyn P; Simmons, Vani N; Ufondu, Chukwudi B; Ravindra, Chitra; Schultz, Ida; Roetzheim, Richard G; Shibata, David; Meade, Cathy D; Gwede, Clement K

2017-04-15

The objective of the current study was to improve colorectal cancer (CRC) screening uptake with the fecal immunochemical test (FIT). The current study investigated the differential impact of a multicomponent, targeted, low-literacy educational intervention compared with a standard, nontargeted educational intervention. Patients aged 50 to 75 years who were of average CRC risk and not up-to-date with CRC screening were recruited from either a federally qualified health center or a primary care community health clinic. Patients were randomized to the intervention condition (targeted photonovella booklet/DVD plus FIT kit) or comparison condition (standard Centers for Disease Control and Prevention brochure plus FIT kit). The main outcome was screening with FIT within 180 days of delivery of the intervention. Of the 416 participants, 54% were female; the participants were racially and ethnically diverse (66% white, 10% Hispanic, and 28% African American), predominantly of low income, and insured (the majority had county health insurance). Overall, the FIT completion rate was 81%, with 78.1% of participants in the intervention versus 83.5% of those in the comparison condition completing FIT (P =  .17). In multivariate analysis, having health insurance was found to be the primary factor predicting a lack of FIT screening (adjusted odds ratio, 2.10; 95% confidence interval, 1.04-4.26 [P =  .04]). The multicomponent, targeted, low-literacy materials were not found to be significantly different or more effective in increasing FIT uptake compared with the nontargeted materials. Provision of a FIT test plus education may provide a key impetus to improve the completion of CRC screening. The type of educational material (targeted vs nontargeted) may matter less. The findings of the current study provide a unique opportunity for clinics to adopt FIT and to choose the type of patient education materials based on clinic, provider, and patient preferences. Cancer 2017;123:1390-1400. © 2016 American Cancer Society. © 2016 American Cancer Society.

Increasing confidence and changing behaviors in primary care providers engaged in genetic counselling.

PubMed

Wilkes, Michael S; Day, Frank C; Fancher, Tonya L; McDermott, Haley; Lehman, Erik; Bell, Robert A; Green, Michael J

2017-09-13

Screening and counseling for genetic conditions is an increasingly important part of primary care practice, particularly given the paucity of genetic counselors in the United States. However, primary care physicians (PCPs) often have an inadequate understanding of evidence-based screening; communication approaches that encourage shared decision-making; ethical, legal, and social implication (ELSI) issues related to screening for genetic mutations; and the basics of clinical genetics. This study explored whether an interactive, web-based genetics curriculum directed at PCPs in non-academic primary care settings was superior at changing practice knowledge, attitudes, and behaviors when compared to a traditional educational approach, particularly when discussing common genetic conditions. One hundred twenty one PCPs in California and Pennsylvania physician practices were randomized to either an Intervention Group (IG) or Control Group (CG). IG physicians completed a 6 h interactive web-based curriculum covering communication skills, basics of genetic testing, risk assessment, ELSI issues and practice behaviors. CG physicians were provided with a traditional approach to Continuing Medical Education (CME) (clinical review articles) offering equivalent information. PCPs in the Intervention Group showed greater increases in knowledge compared to the Control Group. Intervention PCPs were also more satisfied with the educational materials, and more confident in their genetics knowledge and skills compared to those receiving traditional CME materials. Intervention PCPs felt that the web-based curriculum covered medical management, genetics, and ELSI issues significantly better than did the Control Group, and in comparison with traditional curricula. The Intervention Group felt the online tools offered several advantages, and engaged in better shared decision making with standardized patients, however, there was no difference in behavior change between groups with regard to increases in ELSI discussions between PCPs and patients. While our intervention was deemed more enjoyable, demonstrated significant factual learning and retention, and increased shared decision making practices, there were few differences in behavior changes around ELSI discussions. Unfortunately, barriers to implementing behavior change in clinical genetics is not unique to our intervention. Perhaps the missing element is that busy physicians need systems-level support to engage in meaningful discussions around genetics issues. The next step in promoting active engagement between doctors and patients may be to put into place the tools needed for PCPs to easily access the materials they need at the point-of-care to engage in joint discussions around clinical genetics.

In-well time-of-travel approach to evaluate optimal purge duration during low-flow sampling of monitoring wells

USGS Publications Warehouse

Harte, Philip T.

2017-01-01

A common assumption with groundwater sampling is that low (<0.5 L/min) pumping rates during well purging and sampling captures primarily lateral flow from the formation through the well-screened interval at a depth coincident with the pump intake. However, if the intake is adjacent to a low hydraulic conductivity part of the screened formation, this scenario will induce vertical groundwater flow to the pump intake from parts of the screened interval with high hydraulic conductivity. Because less formation water will initially be captured during pumping, a substantial volume of water already in the well (preexisting screen water or screen storage) will be captured during this initial time until inflow from the high hydraulic conductivity part of the screened formation can travel vertically in the well to the pump intake. Therefore, the length of the time needed for adequate purging prior to sample collection (called optimal purge duration) is controlled by the in-well, vertical travel times. A preliminary, simple analytical model was used to provide information on the relation between purge duration and capture of formation water for different gross levels of heterogeneity (contrast between low and high hydraulic conductivity layers). The model was then used to compare these time–volume relations to purge data (pumping rates and drawdown) collected at several representative monitoring wells from multiple sites. Results showed that computation of time-dependent capture of formation water (as opposed to capture of preexisting screen water), which were based on vertical travel times in the well, compares favorably with the time required to achieve field parameter stabilization. If field parameter stabilization is an indicator of arrival time of formation water, which has been postulated, then in-well, vertical flow may be an important factor at wells where low-flow sampling is the sample method of choice.

EVALUATION OF A FLUOROMETRIC SCREENING METHOD FOR PREDICTING TOTAL PAH CONCENTRATIONS IN CONTAMINATED SEDIMENTS

EPA Science Inventory

A flurorometric screening method was used to estimate total polycyclic aromatic hydrocarbon concentrations in sediments collected from the St. Louis River Area of Concern in northeastern Minnesota. Sediments were collected as part of a Regional Environmental Monitoring and Asses...

Weqaya: A Population-Wide Cardiovascular Screening Program in Abu Dhabi, United Arab Emirates

PubMed Central

Harrison, Oliver; Al Siksek, Zaid

2012-01-01

Objectives. We sought to determine cardiovascular risk factor prevalence rates among adults in Abu Dhabi, United Arab Emirates. Methods. We used self-reported indicators, anthropometric measures, and blood tests to screen 50 138 adults aged 18 years or older taking part in a population-wide cardiovascular screening program. Results. Participants’ mean age was 36.82 years (SD = 14.3); 43% were men. Risk factor prevalence rates were as follows: obesity, 35%; overweight, 32%; central obesity, 55%; diabetes, 18%; prediabetes, 27%; dyslipidemia, 44%; and hypertension, 23.1%. In addition, 26% of men were smokers, compared with 0.8% of women. Age-standardized diabetes and prediabetes rates were 25% and 30%, respectively, and age-standardized rates of obesity and overweight were 41% and 34%. Conclusions. This population-wide cardiovascular screening program demonstrated a high cardiovascular burden for our small sample in Abu Dhabi. The data form a baseline against which interventions can be implemented and progress monitored as part of the population-wide Abu Dhabi Cardiovascular Disease Program. PMID:21940918

When pregnant women are not screened for HIV

PubMed Central

Shrim, Alon; Garcia-Bournissen, Facundo; Murphy, Kellie; Koren, Gideon; Farine, Dan

2007-01-01

QUESTION One of my patients gave birth to a baby later diagnosed with HIV infection. I did not offer this patient HIV screening, as I thought she was at low risk. What are the recommendations for HIV testing and what might be the implications of not screening for HIV? ANSWER Although screening is currently recommended by all relevant authorities in Canada, more than 10% of women are not screened antenatally, increasing their babies’ risk for infection. This rate represents a failure that is probably a combination of omission at times by clinicians, embarrassment about discussing the issue on the part of either the physician or the patient, and poor counseling. All Canadian women should receive appropriate antenatal counseling for HIV screening. PMID:17934027

Interval Breast Cancer Rates and Histopathologic Tumor Characteristics after False-Positive Findings at Mammography in a Population-based Screening Program.

PubMed

Hofvind, Solveig; Sagstad, Silje; Sebuødegård, Sofie; Chen, Ying; Roman, Marta; Lee, Christoph I

2018-04-01

Purpose To compare rates and tumor characteristics of interval breast cancers (IBCs) detected after a negative versus false-positive screening among women participating in the Norwegian Breast Cancer Screening Program. Materials and Methods The Cancer Registry Regulation approved this retrospective study. Information about 423 445 women aged 49-71 years who underwent 789 481 full-field digital mammographic screening examinations during 2004-2012 was extracted from the Cancer Registry of Norway. Rates and odds ratios of IBC among women with a negative (the reference group) versus a false-positive screening were estimated by using logistic regression models adjusted for age at diagnosis and county of residence. Results A total of 1302 IBCs were diagnosed after 789 481 screening examinations, of which 7.0% (91 of 1302) were detected among women with a false-positive screening as the most recent breast imaging examination before detection. By using negative screening as the reference, adjusted odds ratios of IBCs were 3.3 (95% confidence interval [CI]: 2.6, 4.2) and 2.8 (95% CI: 1.8, 4.4) for women with a false-positive screening without and with needle biopsy, respectively. Women with a previous negative screening had a significantly lower proportion of tumors that were 10 mm or less (14.3% [150 of 1049] vs 50.0% [seven of 14], respectively; P < .01) and grade I tumors (13.2% [147 of 1114] vs 42.9% [six of 14]; P < .01), but a higher proportion of cases with lymph nodes positive for cancer (40.9% [442 of 1080] vs 13.3% [two of 15], respectively; P = .03) compared with women with a previous false-positive screening with benign biopsy. A retrospective review of the screening mammographic examinations identified 42.9% (39 of 91) of the false-positive cases to be the same lesion as the IBC. Conclusion By using a negative screening as the reference, a false-positive screening examination increased the risk of an IBC three-fold. The tumor characteristics of IBC after a negative screening were less favorable compared with those detected after a previous false-positive screening. © RSNA, 2017 Online supplemental material is available for this article.

Asbestos in Colorado Schools.

ERIC Educational Resources Information Center

Baldwin, Cynthia A.

This study determined, by means of a random sample, how many of Colorado's public schools have asbestos materials and estimated the potential risk of exposure presented by these materials. Forty-one schools were surveyed. Bulk samples of possible asbestos materials were collected and analyzed using the K-squared Asbestos Screening Test to…

Environmental and Psychosocial Barriers to and Benefits of Cervical Cancer Screening in Kenya

PubMed Central

Ragan, Kathleen; Lee Smith, Judith; Saraiya, Mona; Aketch, Millicent

2017-01-01

Abstract Background. Cervical cancer is the second most commonly diagnosed cancer in females and is a leading cause of cancer‐related mortality in Kenya; limited cervical cancer screening services may be a factor. Few studies have examined men's and women's perceptions on environmental and psychosocial barriers and benefits related to screening. Materials and Methods. In 2014, 60 women aged 25–49 years and 40 male partners participated in 10 focus groups (6 female and 4 male), in both rural and urban settings (Nairobi and Nyanza, Kenya), to explore perceptions about barriers to and benefits of cervical cancer screening. Focus groups were segmented by sex, language, geographic location, and screening status. Data were transcribed, translated into English, and analyzed by using qualitative software. Results. Participants identified screening as beneficial for initiating provider discussions about cancer but did not report it as a beneficial method for detecting precancers. Perceived screening barriers included access (transportation, cost), spousal approval, stigma, embarrassment during screening, concerns about speculum use causing infertility, fear of residual effects of test results, lack of knowledge, and religious or cultural beliefs. All participants reported concerns with having a male doctor perform screening tests; however, men uniquely reported the young age of a doctor as a barrier. Conclusion. Identifying perceived barriers and benefits among people in low‐ and middle‐income countries is important to successfully implementing emerging screening programs. The novel findings on barriers and benefits from this study can inform the development of targeted community outreach activities, communication strategies, and educational messages for patients, families, and providers. Implications for Practice. This article provides important information for stakeholders in clinical practice and research when assessing knowledge, beliefs, and acceptability of cervical cancer screening and treatment services in low‐ and middle‐resourced countries. Formative research findings provide information that could be used in the development of health interventions, community education messages, and materials. Additionally, this study illuminates the importance of understanding psychosocial barriers and facilitators to cervical cancer screening, community education, and reduction of stigma as important methods of improving prevention programs and increasing rates of screening among women. PMID:28167567

Meeting Materials for the November 28-29, 2017 Scientific Advisory Panel

EPA Pesticide Factsheets

Meeting Materials for the November 28-30, 2017 Scientific Advisory Panel on Continuing Development of Alternative High-Throughput Screens to Determine Endocrine Disruption, Focusing on Androgen Receptor, Steroidogenesis, and Thyroid Pathways.

Factors influencing breast cancer screening in low-income African Americans in Tennessee.

PubMed

Patel, Kushal; Kanu, Mohamed; Liu, Jianguo; Bond, Brea; Brown, Elizabeth; Williams, Elizabeth; Theriot, Rosemary; Bailey, Stephanie; Sanderson, Maureen; Hargreaves, Margaret

2014-10-01

This study examined demographic and lifestyle factors that influenced decisions and obstacles to being screened for breast cancer in low-income African Americans in three urban Tennessee cities. As part of the Meharry Community Networks Program (CNP) needs assessment, a 123-item community survey was administered to assess demographic characteristics, health care access and utilization, and screening practices for various cancers in low-income African Americans. For this study, only African American women 40 years and older (n = 334) were selected from the Meharry CNP community survey database. There were several predictors of breast cancer screening such as marital status and having health insurance (P < .05). Additionally, there were associations between obstacles to screening and geographic region such as transportation and not having enough information about screenings (P < .05). Educational interventions aimed at improving breast cancer knowledge and screening rates should incorporate information about obstacles and predictors to screening.

Factors influencing Breast Cancer Screening in Low-Income African Americans in Tennessee

PubMed Central

Patel, Kushal; Kanu, Mohamed; Liu, Jianguo; Bond, Brea; Brown, Elizabeth; Williams, Elizabeth; Theriot, Rosemary; Bailey, Stephanie; Sanderson, Maureen; Hargreaves, Margaret

2014-01-01

This study examined demographic and lifestyle factors that influenced decisions and obstacles to being screened for breast cancer in low-income African Americans in three urban Tennessee cities. As part of the Meharry Community Networks Program (CNP) needs assessment, a 123-item community survey was administered to assess demographic characteristics, health care access and utilization, and screening practices for various cancers in low-income African Americans. For this study, only African American women 40 years and older (n=334) were selected from the Meharry CNP community survey database. There were several predictors of breast cancer screening such as marital status and having health insurance (P< .05). Additionally, there were associations between obstacles to screening and geographic region such as transportation and not having enough information about screenings (P< .05). Educational interventions aimed at improving breast cancer knowledge and screening rates should incorporate information about obstacles and predictors to screening. PMID:24554393

Batch test screening of industrial product/byproduct filter materials for agricultural drainage water treatment

USDA-ARS?s Scientific Manuscript database

Filter treatment may be a viable means for removing the nitrate, phosphate, and pesticides discharged with agricultural drainage waters that cause adverse environmental impacts within the U.S. on local, regional, and national scales. Laboratory batch test screening for agricultural drainage water ...

Shack-Hartmann and Interferometric Hybrid Wavefront Sensor

DTIC Science & Technology

2011-03-24

focused spots from those measured for a reference surface [45]. In 1971 B. C. Platt and R. V. Shack proposed using a lenticular screen made with two...Shack-Hartmann WFS. Modern Shack-Hartmann sensors use a lenslet array formed from a solid piece of optical material instead of a lenticular screen [45

49 CFR 1515.9 - Appeal of security threat assessment based on other analyses.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., foreign air carriers, indirect air carriers (IACs), certified cargo screening facilities, or validation...'s reply and any accompanying information, and any other materials or information available to him or... operators, foreign air carriers, IACs, certified cargo screening facilities, or validation firms. [72 FR...

Evaluation of the Optimum Composition of Low-Temperature Fuel Cell Electrocatalysts for Methanol Oxidation by Combinatorial Screening.

PubMed

Antolini, Ermete

2017-02-13

Combinatorial chemistry and high-throughput screening represent an innovative and rapid tool to prepare and evaluate a large number of new materials, saving time and expense for research and development. Considering that the activity and selectivity of catalysts depend on complex kinetic phenomena, making their development largely empirical in practice, they are prime candidates for combinatorial discovery and optimization. This review presents an overview of recent results of combinatorial screening of low-temperature fuel cell electrocatalysts for methanol oxidation. Optimum catalyst compositions obtained by combinatorial screening were compared with those of bulk catalysts, and the effect of the library geometry on the screening of catalyst composition is highlighted.

Mammography Screening 2.0 - How Can Risk-Adapted Screening be Implemented in Clinical Practice?: Results of a Focus Group Discussion with Experts in the RISIKOLOTSE.DE Project.

PubMed

Fürst, Nicole; Kiechle, Marion; Strahwald, Brigitte; Quante, Anne S

2018-05-01

The mammography screening programme has been the subject of criticism for some time. Invitation to take part is currently based only on the risk factors of age and female sex, whereby women with an above-average risk are screened too seldom and women with a low risk are possibly screened too often. In future, an individualised risk assessment could make a risk-adapted procedure possible in breast cancer screening. In the RISIKOLOTSE.DE project, schemes are devised to calculate the individual breast cancer risk and evaluate the results. The aim is to assist doctors and screening participants in participatory decision-making. To gauge the baseline situation in the target groups, qualitative and quantitative surveys were conducted. At the start of the project, a guideline-based focus group discussion was held with 15 doctors and representatives of the public health service. The transcript of this discussion was evaluated by means of a qualitative content analysis. The participants assessed the concept of risk-adapted screening positively overall. At the same time, the majority of them were of the opinion that the results of individualised risk calculation can be understood and evaluated adequately only by doctors. The great communication requirement and lack of remuneration were given as practical obstacles to implementation. The suggestions and new ideas from the focus group ranged from administrative and regulatory changes to new forms of counselling and adaptable practice aids. An important indicator for the RISIKOLOTSE.DE conception and for planning future surveys was that risk calculation for mammography screening 2.0 was regarded as a purely medical function and that the concept of participatory decision-making played hardly any part in the discussion.

Effectiveness of gastric cancer screening programs in South Korea: Organized vs opportunistic models

PubMed Central

Kim, Beom Jin; Heo, Chae; Kim, Byoung Kwon; Kim, Jae Yeol; Kim, Jae Gyu

2013-01-01

AIM: To investigate the outcome and effectiveness of two screening programs, National Cancer Screening Program (NCSP) and opportunistic screening (OS), for the detection of gastric cancer. METHODS: A total of 45  654 subjects underwent upper endoscopy as part of the NCSP or OS at the Chung-Ang University Healthcare System in Korea between January 2007 and December 2010. The study population was comprised of subjects over the age of 40 years. More specifically, subjects who took part in the NCSP were Medicaid recipients and beneficiaries of the National Health Insurance Corporation. Still photographs from the endoscopies diagnosed as gastric cancer were reviewed by two experienced endoscopists. RESULTS: The mean age of the screened subjects was 55 years for men and 54 years for women. A total of 126 cases (0.28%) of gastric cancer were detected from both screening programs; 100 cases (0.3%) from NCSP and in 26 cases (0.2%) from OS. The proportion of early gastric cancer (EGC) detected in NCSP was higher than that in OS (74.0% vs 53.8%, P = 0.046). Among the 34  416 screenees in NCSP, 6585 (19.1%) underwent upper endoscopy every other year as scheduled. Among the 11  238 screenees in OS, 3050 (27.1%) underwent upper endoscopy at least once every two years during the study period. The detection rate of gastric cancer was found to be significantly higher during irregular follow-up than during regular follow-up in both screening programs (0.3% vs 0.2%, P = 0.036). A higher incidence of EGC than advanced gastric cancer was observed during regular follow-up compared with irregular follow-up. CONCLUSION: Compliance to the screening program is more important than the type of screening system used. PMID:23430471

Comparison of Four Recruiting Strategies in a Smoking Cessation Trial

PubMed Central

Buller, David B.; Meenan, Richard; Severson, Herb; Halperin, Abigail; Edwards, Erika; Magnusson, Brooke

2012-01-01

Objectives To compare 4 on-line and off-line recruiting methods. Methods Young adult smokers (n=3353) were recruited to a trial comparing smoking cessation services with an on-line health risk assessment (HRA), on-line ads, off-line materials, and quit line screening. Results On-line ads (n=1426; $41.35) and off-line materials recruited the most smokers (n=1341; $56.23) for the lowest cost. Quit line screening was more expensive (n=189; $133.61), but enrollees used cessation services the most (34%-82%). On-line HRA was least successful and most costly (n=397; $630.85) but had the highest follow-up (45%-55%). Conclusions On-line ads and off-line materials were most effective and cost-effective methods. PMID:22584086

The Lung Screen Uptake Trial (LSUT): protocol for a randomised controlled demonstration lung cancer screening pilot testing a targeted invitation strategy for high risk and 'hard-to-reach' patients.

PubMed

Quaife, Samantha L; Ruparel, Mamta; Beeken, Rebecca J; McEwen, Andy; Isitt, John; Nolan, Gary; Sennett, Karen; Baldwin, David R; Duffy, Stephen W; Janes, Samuel M; Wardle, Jane

2016-04-20

Participation in low-dose CT (LDCT) lung cancer screening offered in the trial context has been poor, especially among smokers from socioeconomically deprived backgrounds; a group for whom the risk-benefit ratio is improved due to their high risk of lung cancer. Attracting high risk participants is essential to the success and equity of any future screening programme. This study will investigate whether the observed low and biased uptake of screening can be improved using a targeted invitation strategy. A randomised controlled trial design will be used to test whether targeted invitation materials are effective at improving engagement with an offer of lung cancer screening for high risk candidates. Two thousand patients aged 60-75 and recorded as a smoker within the last five years by their GP, will be identified from primary care records and individually randomised to receive either intervention invitation materials (which take a targeted, stepped and low burden approach to information provision prior to the appointment) or control invitation materials. The primary outcome is uptake of a nurse-led 'lung health check' hospital appointment, during which patients will be offered a spirometry test, an exhaled carbon monoxide (CO) reading, and an LDCT if eligible. Initial data on demographics (i.e. age, sex, ethnicity, deprivation score) and smoking status will be collected in primary care and analysed to explore differences between attenders and non-attenders with respect to invitation group. Those who attend the lung health check will have further data on smoking collected during their appointment (including pack-year history, nicotine dependence and confidence to quit). Secondary outcomes will include willingness to be screened, uptake of LDCT and measures of informed decision-making to ensure the latter is not compromised by either invitation strategy. If effective at improving informed uptake of screening and reducing bias in participation, this invitation strategy could be adopted by local screening pilots or a national programme. This study was registered with the ISRCTN (International Standard Registered Clinical/soCial sTudy Number: ISRCTN21774741) on the 23rd September 2015 and the NIH ClinicalTrials.gov database (NCT0255810) on the 22nd September 2015.

Development of a fragile X syndrome (FXS) knowledge scale: towards a modified multidimensional measure of informed choice for FXS population carrier screening.

PubMed

Ames, Alice G; Jaques, Alice; Ukoumunne, Obioha C; Archibald, Alison D; Duncan, Rony E; Emery, Jon; Metcalfe, Sylvia A

2015-02-01

Genetic carrier screening is increasingly possible for many conditions, but it is important to ensure decisions are informed. The multidimensional measure of informed choice (MMIC) is a quantitative instrument developed to evaluate informed choice in prenatal screening for Down syndrome, measuring knowledge, attitudes and uptake. To apply the MMIC in other screening settings, the knowledge scale must be modified. To develop and validate a modified MMIC knowledge scale for use with women undergoing carrier screening for fragile X syndrome (FXS). Responses to MMIC items were collected through questionnaires as part of a FXS carrier screening pilot study in a preconception setting in Melbourne, Australia. Ten knowledge scale items were developed using a modified Delphi technique. Cronbach's alpha and factor analysis were used to validate the new FXS knowledge scale. We summarized the knowledge, attitudes and informed choice status based on the modified MMIC. Two hundred and eighty-five women were recruited, 241 eligible questionnaires were complete for analysis. The FXS knowledge scale items measured one salient construct and were internally consistent (alpha = 0.70). 71% (172/241) of participants were classified as having good knowledge, 70% (169/241) had positive attitudes and 27% (65/241) made an informed choice to accept or decline screening. We present the development of a knowledge scale as part of a MMIC to evaluate informed choice in population carrier screening for FXS. This can be used as a template by other researchers to develop knowledge scales for other conditions for use in the MMIC. © 2012 John Wiley & Sons Ltd.

Municipal waste processing apparatus

DOEpatents

Mayberry, John L.

1989-01-01

Municipal waste materials are processed by crushing the materials so that pieces of noncombustible material are smaller than a selected size and pieces of combustible material are larger than the selected size. The crushed materials are placed on a vibrating mesh screen conveyor belt having openings which pass the smaller, noncombustible pieces of material, but do not pass the larger, combustible pieces of material. Consecutive conveyors may be connected by an intermediate vibratory plate. An air knife can be used to further separate materials based on weight.

Modeling the Cost-Effectiveness of Alternative Upper Age Limits for Breast Cancer Screening in England and Wales.

PubMed

Rafia, Rachid; Brennan, Alan; Madan, Jason; Collins, Karen; Reed, Malcolm W R; Lawrence, Gill; Robinson, Thompson; Greenberg, David; Wyld, Lynda

2016-06-01

Currently in the United Kingdom, the National Health Service (NHS) Breast Screening Programme invites all women for triennial mammography between the ages of 47 and 73 years (the extension to 47-50 and 70-73 years is currently examined as part of a randomized controlled trial). The benefits and harms of screening in women 70 years and older, however, are less well documented. The aim of this study was to examine whether extending screening to women older than 70 years would represent a cost-effective use of NHS resources and to identify the upper age limit at which screening mammography should be extended in England and Wales. A mathematical model that allows the impact of screening policies on cancer diagnosis and subsequent management to be assessed was built. The model has two parts: a natural history model of the progression of breast cancer up to discovery and a postdiagnosis model of treatment, recurrence, and survival. The natural history model was calibrated to available data and compared against published literature. The management of breast cancer at diagnosis was taken from registry data and valued using official UK tariffs. The model estimated that screening would lead to overdiagnosis in 6.2% of screen-detected women at the age of 72 years, increasing up to 37.9% at the age of 90 years. Under commonly quoted willingness-to-pay thresholds in the United Kingdom, our study suggests that an extension to screening up to the age of 78 years represents a cost-effective strategy. This study provides encouraging findings to support the extension of the screening program to older ages and suggests that further extension of the UK NHS Breast Screening Programme up to age 78 years beyond the current upper age limit of 73 years could be potentially cost-effective according to current NHS willingness-to-pay thresholds. Copyright © 2016 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Screening for Developmental Neurotoxicity in Zebrafish Larvae: Assessment of Behavior and Malformations.

EPA Science Inventory

The U.S. Environmental Protection Agency is evaluating methods to screen and prioritize large numbers of chemicals for developmental toxicity. As part of this approach, it is important to be able to separate overt toxicity (Le., malformed larvae) from the more specific neurotoxic...

Greening up Auto Part Manufacturing: A Collaboration between Academia and Industry

ERIC Educational Resources Information Center

Kneas, Kristi A.; Armstrong, Drew L.; Brank, Alice R.; Johnson, Amanda L.; Kissinger, Chelsea A.; Mabe, Adam R.; Sezer, Ozge; Fontinell, Mike

2009-01-01

Historically, manufacture of automotive electronic components and screen-printing of automotive instrument clusters at DENSO Manufacturing Tennessee, Inc. required washing of equipment such as screens, stencils, and jigs with sizable quantities of volatile organic compounds and hazardous air pollutants. Collaborative efforts between the Maryville…

Behavorial Screens for Detecting Developmental Neurotoxicity in Larval Zebrafish

EPA Science Inventory

As part of the EPA's effort to develop an in vivo, vertebrate screen for toxic chemicals, we have characterized basic behaviors of 6-day post-fertilization (dpf) zebrafish (Danio rerio) larvae in a microtiter plate format. Our main goal is to develop a convenient, reproducible me...

DEC Ada interface to Screen Management Guidelines (SMG)

NASA Technical Reports Server (NTRS)

Laomanachareon, Somsak; Lekkos, Anthony A.

1986-01-01

DEC's Screen Management Guidelines are the Run-Time Library procedures that perform terminal-independent screen management functions on a VT100-class terminal. These procedures assist users in designing, composing, and keeping track of complex images on a video screen. There are three fundamental elements in the screen management model: the pasteboard, the virtual display, and the virtual keyboard. The pasteboard is like a two-dimensional area on which a user places and manipulates screen displays. The virtual display is a rectangular part of the terminal screen to which a program writes data with procedure calls. The virtual keyboard is a logical structure for input operation associated with a physical keyboard. SMG can be called by all major VAX languages. Through Ada, predefined language Pragmas are used to interface with SMG. These features and elements of SMG are briefly discussed.

Hospitalized women's willingness to pay for an inpatient screening mammogram.

PubMed

Khaliq, Waseem; Harris, Ché Matthew; Landis, Regina; Bridges, John F P; Wright, Scott M

2014-01-01

Lower rates for breast cancer screening persist among low income and uninsured women. Although Medicare and many other insurance plans would pay for screening mammograms done during hospital stays, breast cancer screening has not been part of usual hospital care. This study explores the mean amount of money that hospitalized women were willing to contribute towards the cost of a screening mammogram. Of the 193 enrolled patients, 72% were willing to pay a mean of $83.41 (95% CI, $71.51-$95.31) in advance towards inpatient screening mammogram costs. The study's findings suggest that hospitalized women value the prospect of screening mammography during the hospitalization. It may be wise policy to offer mammograms to nonadherent hospitalized women, especially those who are at high risk for developing breast cancer. © 2014 Annals of Family Medicine, Inc.

Combinatorial fabrication and screening of organic light-emitting device arrays

NASA Astrophysics Data System (ADS)

Shinar, Joseph; Shinar, Ruth; Zhou, Zhaoqun

2007-11-01

The combinatorial fabrication and screening of 2-dimensional (2-d) small molecular UV-violet organic light-emitting device (OLED) arrays, 1-d blue-to-red arrays, 1-d intense white OLED libraries, 1-d arrays to study Förster energy transfer in guest-host OLEDs, and 2-d arrays to study exciplex emission from OLEDs is described. The results demonstrate the power of combinatorial approaches for screening OLED materials and configurations, and for studying their basic properties.

Expected Backgrounds of the BetaCage, an Ultra-sensitive Screener for Surface Contamination

NASA Astrophysics Data System (ADS)

Wang, Boqian; Bunker, Raymond; Schnee, Richard; Bowles, Michael; Kos, Marek; Ahmed, Zeeshan; Golwala, Sunil; Nelson, Robert; Grant, Darren

2013-04-01

Material screening for low-energy betas and alphas is necessary for rare-event-search experiments, such as dark matter and neutrinoless double-beta decay searches where surface radiocontamination has become a significant background. The BetaCage, a gaseous neon time-projection chamber, has been proposed as a screener for emitters of low-energy betas and alphas to which existing screening facilities are insufficiently sensitive. The expected sensitivity is 0.1 betas / (keV m^2 day) and 0.1 alphas / (m^2 day). Expected backgrounds are dominated by Compton scattering of external photons in the sample to be screened; radioassays and simulations indicate backgrounds from detector materials and radon daughters should be subdominant. We will report on details of the background simulations and the detector design that allows discrimination to reach these sensitivity levels.

Density Functional Theory and Beyond for Band-Gap Screening: Performance for Transition-Metal Oxides and Dichalcogenides.

PubMed

Li, Wenqing; Walther, Christian F J; Kuc, Agnieszka; Heine, Thomas

2013-07-09

The performance of a wide variety of commonly used density functionals, as well as two screened hybrid functionals (HSE06 and TB-mBJ), on predicting electronic structures of a large class of en vogue materials, such as metal oxides, chalcogenides, and nitrides, is discussed in terms of band gaps, band structures, and projected electronic densities of states. Contrary to GGA, hybrid functionals and GGA+U, both HSE06 and TB-mBJ are able to predict band gaps with an appreciable accuracy of 25% and thus allow the screening of various classes of transition-metal-based compounds, i.e., mixed or doped materials, at modest computational cost. The calculated electronic structures are largely unaffected by the choice of basis functions and software implementation, however, might be subject to the treatment of the core electrons.

High-throughput screening of metal-porphyrin-like graphenes for selective capture of carbon dioxide

PubMed Central

Bae, Hyeonhu; Park, Minwoo; Jang, Byungryul; Kang, Yura; Park, Jinwoo; Lee, Hosik; Chung, Haegeun; Chung, ChiHye; Hong, Suklyun; Kwon, Yongkyung; Yakobson, Boris I.; Lee, Hoonkyung

2016-01-01

Nanostructured materials, such as zeolites and metal-organic frameworks, have been considered to capture CO2. However, their application has been limited largely because they exhibit poor selectivity for flue gases and low capture capacity under low pressures. We perform a high-throughput screening for selective CO2 capture from flue gases by using first principles thermodynamics. We find that elements with empty d orbitals selectively attract CO2 from gaseous mixtures under low CO2 pressures (~10−3 bar) at 300 K and release it at ~450 K. CO2 binding to elements involves hybridization of the metal d orbitals with the CO2 π orbitals and CO2-transition metal complexes were observed in experiments. This result allows us to perform high-throughput screening to discover novel promising CO2 capture materials with empty d orbitals (e.g., Sc– or V–porphyrin-like graphene) and predict their capture performance under various conditions. Moreover, these findings provide physical insights into selective CO2 capture and open a new path to explore CO2 capture materials. PMID:26902156

High-throughput screening of metal-porphyrin-like graphenes for selective capture of carbon dioxide.

PubMed

Bae, Hyeonhu; Park, Minwoo; Jang, Byungryul; Kang, Yura; Park, Jinwoo; Lee, Hosik; Chung, Haegeun; Chung, ChiHye; Hong, Suklyun; Kwon, Yongkyung; Yakobson, Boris I; Lee, Hoonkyung

2016-02-23

Nanostructured materials, such as zeolites and metal-organic frameworks, have been considered to capture CO2. However, their application has been limited largely because they exhibit poor selectivity for flue gases and low capture capacity under low pressures. We perform a high-throughput screening for selective CO2 capture from flue gases by using first principles thermodynamics. We find that elements with empty d orbitals selectively attract CO2 from gaseous mixtures under low CO2 pressures (~10(-3) bar) at 300 K and release it at ~450 K. CO2 binding to elements involves hybridization of the metal d orbitals with the CO2 π orbitals and CO2-transition metal complexes were observed in experiments. This result allows us to perform high-throughput screening to discover novel promising CO2 capture materials with empty d orbitals (e.g., Sc- or V-porphyrin-like graphene) and predict their capture performance under various conditions. Moreover, these findings provide physical insights into selective CO2 capture and open a new path to explore CO2 capture materials.

High-throughput screening of metal-porphyrin-like graphenes for selective capture of carbon dioxide

NASA Astrophysics Data System (ADS)

Bae, Hyeonhu; Park, Minwoo; Jang, Byungryul; Kang, Yura; Park, Jinwoo; Lee, Hosik; Chung, Haegeun; Chung, Chihye; Hong, Suklyun; Kwon, Yongkyung; Yakobson, Boris I.; Lee, Hoonkyung

2016-02-01

Nanostructured materials, such as zeolites and metal-organic frameworks, have been considered to capture CO2. However, their application has been limited largely because they exhibit poor selectivity for flue gases and low capture capacity under low pressures. We perform a high-throughput screening for selective CO2 capture from flue gases by using first principles thermodynamics. We find that elements with empty d orbitals selectively attract CO2 from gaseous mixtures under low CO2 pressures (~10-3 bar) at 300 K and release it at ~450 K. CO2 binding to elements involves hybridization of the metal d orbitals with the CO2 π orbitals and CO2-transition metal complexes were observed in experiments. This result allows us to perform high-throughput screening to discover novel promising CO2 capture materials with empty d orbitals (e.g., Sc- or V-porphyrin-like graphene) and predict their capture performance under various conditions. Moreover, these findings provide physical insights into selective CO2 capture and open a new path to explore CO2 capture materials.

The novel measuring method for screening and assessing chromium content in clothes and shoes materials

NASA Astrophysics Data System (ADS)

Salerno-Kochan, R.

2017-10-01

The aim of this paper is to propose the bioindicative measuring method for screening and assessing the safety of textile and leather materials in relation to chemical threats. This method is based on toxicological assay in which Tetrahymena pyriformis, unicellular organism belonging to protozoans, is used as a test organism. For the realization of the research goal the sensitivity threshold of test organisms to chromium(VI) solutions was identified. The changes in cell development of test organisms in chromium solutions were registered by colorimetric measurements in the presence of alamarBlue® cell viability reagent. Empirical data enabled to fit logistic curves on the base of which the level of chromium toxicity was estimated. In the second step, harmfulness of aqueous extracts obtained from textile and leather samples containing chromium in relation to test organisms was evaluated. The performed research confirmed the high efficiency of the proposed method in screening and assessing chromium content in clothes and shoes materials and showed possibilities of using it in safety assessment of products with regard to chemical risks.

Characterization Report for the David Witherspoon Screen Art Site

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phyllis C. Weaver

The U.S. Department of Energy (DOE) Oak Ridge Office (ORO) of Environmental Management (EM) requested the technical assistance of Oak Ridge Institute for Science and Education (ORISE) to characterize a tract of land associated with the David Witherspoon, Incorporated (DWI) Volunteer Equipment and Supply Company (VESC). This tract of land (hereinafter referred to as Screen Arts) is located in the Vestal Community in the 2000-block of Maryville Pike in south Knoxville, Tennessee, as shown in Figure A-1. This tract of land has been used primarily to store salvaged equipment and materials for resale, recycle, or for disposal in the formermore » landfill once operated by DWI. The DWI Site industrial landfill and metal recycling business had been permitted by the Tennessee Division of Radiological Health to accept low-level radiologically contaminated metals. DWI received materials and equipment associated with operations from DOE sites, including those in Oak Ridge, Tennessee; Paducah, Kentucky; and Portsmouth, Ohio. It is likely that items stored at Screen Arts may have contained some residual radiological materials.« less

Analytical instrumentation infrastructure for combinatorial and high-throughput development of formulated discrete and gradient polymeric sensor materials arrays

NASA Astrophysics Data System (ADS)

Potyrailo, Radislav A.; Hassib, Lamyaa

2005-06-01

Multicomponent polymer-based formulations of optical sensor materials are difficult and time consuming to optimize using conventional approaches. To address these challenges, our long-term goal is to determine relationships between sensor formulation and sensor response parameters using new scientific methodologies. As the first step, we have designed and implemented an automated analytical instrumentation infrastructure for combinatorial and high-throughput development of polymeric sensor materials for optical sensors. Our approach is based on the fabrication and performance screening of discrete and gradient sensor arrays. Simultaneous formation of multiple sensor coatings into discrete 4×6, 6×8, and 8×12 element arrays (3-15μL volume per element) and their screening provides not only a well-recognized acceleration in the screening rate, but also considerably reduces or even eliminates sources of variability, which are randomly affecting sensors response during a conventional one-at-a-time sensor coating evaluation. The application of gradient sensor arrays provides additional capabilities for rapid finding of the optimal formulation parameters.

Lead-free Halide Perovskites via Functionality-directed Materials Screening

NASA Astrophysics Data System (ADS)

Zhang, Lijun; Yang, Dongwen; Lv, Jian; Zhao, Xingang; Yang, Ji-Hui; Yu, Liping; Wei, Su-Huai; Zunger, Alex

Hybrid organic-inorganic halide perovskites with the prototype material of CH3NH3PbI3 have recently attracted much interest as low-cost and high-performance photovoltaic absorbers but one would like to improve their stability and get rid of toxic Pb. We used photovoltaic-functionality-directed materials screening approach to rationally design via first-principles DFT calculations Pb-free halide perovskites. Screening criteria involve thermodynamic and crystallographic stability, as well as solar band gaps, light carrier effective masses, exciton binding, etc. We considered both single atomic substitutions in AMX3 normal perovskites (altering chemical constituents of A, M and X individually) as well as double substitution of 2M into B+C in A2BCX6 double-perovskites. Chemical trends in phase stabilities and optoelectronic properties are discussed with some promising cases exhibiting solar cell efficiencies comparable to that of CH3NH3PbI3. L.Z. founded by Recruitment Program of Global Youth Experts and National Key Research and Development Program of China, and A.Z. by DOE EERE Sun Shot of USA.

Metal sulfide for battery applications

NASA Astrophysics Data System (ADS)

Guidotti, Ronald A.

1988-08-01

A number of metal sulfides can be used in batteries as a cathode (reducible) material as part of an electrochemical couple to provide energy. There are a number of physical and chemical characteristics that can be evaluated for screening potential candidates for use in batteries. These include: cell potential vs. Li, thermal and chemical stability, electrical conductivity, allotropic form (phase), reaction kinetics during discharge, type of discharge mechanism, and material rechargeability. These are reviewed in general, with emphasis on sulfides of copper, iron, and molybdenum which are currently being used as cathodes in Li and Li-alloy batteries. The presence of impurities can adversely impact performance when naturally occurring sulfide minerals are used for battery applications. Sandia National Laboratories uses natural pyrite (FeS2) for its high-temperature, thermally activated Li(Si)/FeS2 batteries. The purification and processing procedures for the FeS2 involves both chemical and physical methods. Flotation was found to yield comparable results as HF leaching for removal of silica, but without the negative health and environmental concerns associated with this technique.

Develop Silicone Encapsulation Systems for Terrestrial Silicon Solar Arrays

NASA Technical Reports Server (NTRS)

1979-01-01

A cost effective encapsulant system was identified and a silicone acrylic cover material containing a durable ultraviolet screening agent was prepared. The effectiveness of the cover material in protecting photo-oxidatively sensitive polymers was demonstrated.

Concerns, perceived need and competing priorities: a qualitative exploration of decision-making and non-participation in a population-based flexible sigmoidoscopy screening programme to prevent colorectal cancer.

PubMed

Hall, N; Birt, L; Rees, C J; Walter, F M; Elliot, S; Ritchie, M; Weller, D; Rubin, G

2016-11-11

Optimising uptake of colorectal cancer (CRC) screening is important to achieve projected health outcomes. Population-based screening by flexible sigmoidoscopy (FS) was introduced in England in 2013 (NHS Bowel scope screening). Little is known about reactions to the invitation to participate in FS screening, as offered within the context of the Bowel scope programme. We aimed to investigate responses to the screening invitation to inform understanding of decision-making, particularly in relation to non-participation in screening. Qualitative analysis of semistructured in-depth interviews and written accounts. People from 31 general practices in the North East and East of England invited to attend FS screening as part of NHS Bowel scope screening programme were sent invitations to take part in the study. We purposively sampled interviewees to ensure a range of accounts in terms of beliefs, screening attendance, sex and geographical location. 20 screeners and 25 non-screeners were interviewed. Written responses describing reasons for, and circumstances surrounding, non-participation from a further 28 non-screeners were included in the analysis. Thematic analysis identified a range of reactions to the screening invitation, decision-making processes and barriers to participation. These include a perceived or actual lack of need; inability to attend; anxiety and fear about bowel preparation, procedures or hospital; inability or reluctance to self-administer an enema; beliefs about low susceptibility to bowel cancer or treatment and understanding of harm and benefits. The strength, rather than presence, of concerns about the test and perceived need for reassurance were important in the decision to participate for screeners and non-screeners. Decision-making occurs within the context of previous experiences and day-to-day life. Understanding the reasons for non-participation in FS screening can help inform strategies to improve uptake and may be transferable to other screening programmes. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Explosive Characteristics of Carbonaceous Nanoparticles

NASA Astrophysics Data System (ADS)

Turkevich, Leonid; Fernback, Joseph; Dastidar, Ashok

2013-03-01

Explosion testing has been performed on 20 codes of carbonaceous particles. These include SWCNTs (single-walled carbon nanotubes), MWCNTs (multi-walled carbon nanotubes), CNFs (carbon nanofibers), graphene, diamond, fullerene, carbon blacks and graphites. Explosion screening was performed in a 20 L explosion chamber (ASTM E1226-10 protocol), at a (dilute) concentration of 500 g/m3, using a 5 kJ ignition source. Time traces of overpressure were recorded. Samples exhibited overpressures of 5-7 bar, and deflagration index KSt = V1/3 (dp/pt)max ~ 10 - 80 bar-m/s, which places these materials in European Dust Explosion Class St-1 (similar to cotton and wood dust). There was minimal variation between these different materials. The explosive characteristics of these carbonaceous powders are uncorrelated with particle size (BET specific surface area). Additional tests were performed on selected materials to identify minimum explosive concentration [MEC]. These materials exhibit MEC ~ 101 -102 g/m3 (lower than the MEC for coals). The concentration scans confirm that the earlier screening was performed under fuel-rich conditions (i.e. the maximum over-pressure and deflagration index exceed the screening values); e.g. the true fullerene KSt ~ 200 bar-m/s, placing it borderline St-1/St-2. Work supported through the NIOSH Nanotechnology Research Center (NTRC)

Irradiate-anneal screening of total dose effects in semiconductor devices

NASA Technical Reports Server (NTRS)

Stanley, A. G.; Price, W. E.

1976-01-01

Judicious choice of radiation dose and parameter change acceptance criteria, absence of anomalous anneal phenomena, and absence of anomalous reirradiation effects are recognized as essential for a successful irradiation-anneal (IRAN) screening procedure to ensure that no device will fall, upon reirradiation, above parametric limits assigned for the worst case application. Reirradiation and irradiation-anneal behavior of various semiconductor devices are compared and those that do not lend themselves to IRAN screening are singled out. Information needed to judge the suitability of an IRAN type screening program is detailed. Reasons for success of the limited IRAN screening of flight parts for the Mariner Jupiter/Saturn (MJS '77) spacecraft are indicated.

Effects of build parameters on linear wear loss in plastic part produced by fused deposition modeling

NASA Astrophysics Data System (ADS)

Mohamed, Omar Ahmed; Masood, Syed Hasan; Bhowmik, Jahar Lal

2017-07-01

Fused Deposition Modeling (FDM) is one of the prominent additive manufacturing technologies for producing polymer products. FDM is a complex additive manufacturing process that can be influenced by many process conditions. The industrial demands required from the FDM process are increasing with higher level product functionality and properties. The functionality and performance of FDM manufactured parts are greatly influenced by the combination of many various FDM process parameters. Designers and researchers always pay attention to study the effects of FDM process parameters on different product functionalities and properties such as mechanical strength, surface quality, dimensional accuracy, build time and material consumption. However, very limited studies have been carried out to investigate and optimize the effect of FDM build parameters on wear performance. This study focuses on the effect of different build parameters on micro-structural and wear performance of FDM specimens using definitive screening design based quadratic model. This would reduce the cost and effort of additive manufacturing engineer to have a systematic approachto make decision among the manufacturing parameters to achieve the desired product quality.

Orbital-dependent Electron-Hole Interaction in Graphene and Associated Multi-Layer Structures

PubMed Central

Deng, Tianqi; Su, Haibin

2015-01-01

We develop an orbital-dependent potential to describe electron-hole interaction in materials with structural 2D character, i.e. quasi-2D materials. The modulated orbital-dependent potentials are also constructed with non-local screening, multi-layer screening, and finite gap due to the coupling with substrates. We apply the excitonic Hamiltonian in coordinate-space with developed effective electron-hole interacting potentials to compute excitons’ binding strength at M (π band) and Γ (σ band) points in graphene and its associated multi-layer forms. The orbital-dependent potential provides a range-separated property for regulating both long- and short-range interactions. This accounts for the existence of the resonant π exciton in single- and bi-layer graphenes. The remarkable strong electron-hole interaction in σ orbitals plays a decisive role in the existence of σ exciton in graphene stack at room temperature. The interplay between gap-opening and screening from substrates shed a light on the weak dependence of σ exciton binding energy on the thickness of graphene stacks. Moreover, the analysis of non-hydrogenic exciton spectrum in quasi-2D systems clearly demonstrates the remarkable comparable contribution of orbital dependent potential with respect to non-local screening process. The understanding of orbital-dependent potential developed in this work is potentially applicable for a wide range of materials with low dimension. PMID:26610715

Reducing the Social Gradient in Uptake of the NHS Colorectal Cancer Screening Programme Using a Narrative-Based Information Leaflet: A Cluster-Randomised Trial

PubMed Central

McGregor, Lesley M.; von Wagner, Christian; Atkin, Wendy; Kralj-Hans, Ines; Halloran, Stephen P.; Handley, Graham; Logan, Richard F.; Rainbow, Sandra; Smith, Steve; Snowball, Julia; Thomas, Mary C.; Smith, Samuel G.; Vart, Gemma; Howe, Rosemary; Counsell, Nicholas; Hackshaw, Allan; Morris, Stephen; Duffy, Stephen W.; Raine, Rosalind; Wardle, Jane

2016-01-01

Objective. To test the effectiveness of adding a narrative leaflet to the current information material delivered by the NHS English colorectal cancer (CRC) screening programme on reducing socioeconomic inequalities in uptake. Participants. 150,417 adults (59–74 years) routinely invited to complete the guaiac Faecal Occult Blood test (gFOBt) in March 2013. Design. A cluster randomised controlled trial (ISRCTN74121020) to compare uptake between two arms. The control arm received the standard NHS CRC screening information material (SI) and the intervention arm received the standard information plus a supplementary narrative leaflet, which had previously been shown to increase screening intentions (SI + N). Between group comparisons were made for uptake overall and across socioeconomic status (SES). Results. Uptake was 57.7% and did not differ significantly between the two trial arms (SI: 58.5%; SI + N: 56.7%; odds ratio = 0.93; 95% confidence interval: 0.81–1.06; p = 0.27). There was no interaction between group and SES quintile (p = 0.44). Conclusions. Adding a narrative leaflet to existing information materials does not reduce the SES gradient in uptake. Despite the benefits of using a pragmatic trial design, the need to add to, rather than replace, existing information may have limited the true value of an evidence-based intervention on behaviour. PMID:27069473

21 CFR 1301.90 - Employee screening procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., assumed that the following questions will become a part of an employer's comprehensive employee screening program: Question. Within the past five years, have you been convicted of a felony, or within the past two.... Question. In the past three years, have you ever knowingly used any narcotics, amphetamines or barbiturates...

Nutritional Disorders of Children. Prevention, Screening, and Followup.

ERIC Educational Resources Information Center

Fomon, Samuel J.

Intended for child health care providers, the text contains information on improving preventive efforts in nutrition, particurlarly those focused on prevention of the major health problems which are nutrition related (obesity, atherosclerosis, dental caries, and anemia). Part I focuses on screening of individual children likely to be at risk of…

Integrating Universal Behavioral Screening within Program-Wide Positive Behavioral Interventions and Supports

ERIC Educational Resources Information Center

Burke, Mack D.; Rispoli, Mandy; Clemens, Nathan H.; Lee, Yuan-Hsuan; Sanchez, Lisa; Hatton, Heather

2016-01-01

Universal behavioral screening is a major part of positive behavioral support and response to intervention systems. Program-wide positive behavioral interventions and supports (PBIS) focuses on establishing social, emotional, and behavioral competence through promotion of a small set of behavioral expectations that are agreed upon, taught, and…

THE USEPA'S METAL FINISHING FACILITY RISK SCREENING TOOL (MFFRST) AND POLLUTION PREVENTION TOOL (MFFP2T)

EPA Science Inventory

This presentation will provide an overview of the USEPA's Metal Finishing Facility Risk Screening Tool, including a discussion of the models used and outputs. The tool is currently being expanded to include pollution prevention considerations as part of the model. The current st...

7 CFR 361.10 - Costs and charges.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., DEPARTMENT OF AGRICULTURE IMPORTATION OF SEED AND SCREENINGS UNDER THE FEDERAL SEED ACT § 361.10 Costs and..., and salaries of officers or employees of the Department) in connection with the monitoring of cleaning, labeling, other reconditioning, or destruction of seed, screenings, or refuse under this part shall be...

Microelectronic components and metallic oxide studies and applications

NASA Technical Reports Server (NTRS)

Williams, L., Jr.

1976-01-01

The project involved work in two basic areas: (1) Evaluation of commercial screen printable thick film conductors, resistors, thermistors and dielectrics as well as alumina substrates used in hybird microelectronics industries. Results of tests made on materials produced by seven companies are presented. (2) Experimental studies on metallic oxides of copper and vanadium, in an effort to determine their electrochemical properties in crystalline, powder mixtures and as screen printable thick films constituted the second phase of the research effort. Oxide investigations were aimed at finding possible applications of these materials as switching devices memory elements and sensors.

Implementation and Evaluation of Two Educational Strategies to Improve Screening for Eating Disorders in Pediatric Primary Care.

PubMed

Gooding, Holly C; Cheever, Elizabeth; Forman, Sara F; Hatoun, Jonathan; Jooma, Farah; Touloumtzis, Currie; Vernacchio, Louis

2017-05-01

Routine screening for disordered eating or body image concerns is recommended by the American Academy of Pediatrics. We evaluated the ability of two educational interventions to increase screening for eating disorders in pediatric primary care practice, predicting that the "active-learning" group would have an increase in documented screening after intervention. We studied 303 practitioners in a large independent practice association located in the northeastern United States. We used a quasi-experimental design to test the effect of printed educational materials ("print-learning" group, n = 280 participants) compared with in-person shared learning followed by on-line spaced education ("active-learning" group, n = 23 participants) on documented screening of adolescents for eating disorder symptoms during preventive care visits. A subset of 88 participants completed additional surveys regarding knowledge of eating disorders, comfort screening for, diagnosing, and treating eating disorders, and satisfaction with their training regarding eating disorders. During the preintervention period, 4.5% of patients seen by practitioners in both the print-learning and active-learning groups had chart documentation of screening for eating disorder symptoms or body image concerns. This increased to 22% in the active-learning group and 5.7% in the print-learning group in the postintervention period, a statistically significant result. Compared with print-learning participants, active-learning group participants had greater eating disorder knowledge scores, increases in comfort diagnosing eating disorders, and satisfaction with their training in this area. In-person shared learning followed by on-line spaced education is more effective than print educational materials for increasing provider documentation of screening for eating disorders in primary care. Copyright © 2016 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

High content analysis platform for optimization of lipid mediated CRISPR-Cas9 delivery strategies in human cells.

PubMed

Steyer, Benjamin; Carlson-Stevermer, Jared; Angenent-Mari, Nicolas; Khalil, Andrew; Harkness, Ty; Saha, Krishanu

2016-04-01

Non-viral gene-editing of human cells using the CRISPR-Cas9 system requires optimized delivery of multiple components. Both the Cas9 endonuclease and a single guide RNA, that defines the genomic target, need to be present and co-localized within the nucleus for efficient gene-editing to occur. This work describes a new high-throughput screening platform for the optimization of CRISPR-Cas9 delivery strategies. By exploiting high content image analysis and microcontact printed plates, multi-parametric gene-editing outcome data from hundreds to thousands of isolated cell populations can be screened simultaneously. Employing this platform, we systematically screened four commercially available cationic lipid transfection materials with a range of RNAs encoding the CRISPR-Cas9 system. Analysis of Cas9 expression and editing of a fluorescent mCherry reporter transgene within human embryonic kidney cells was monitored over several days after transfection. Design of experiments analysis enabled rigorous evaluation of delivery materials and RNA concentration conditions. The results of this analysis indicated that the concentration and identity of transfection material have significantly greater effect on gene-editing than ratio or total amount of RNA. Cell subpopulation analysis on microcontact printed plates, further revealed that low cell number and high Cas9 expression, 24h after CRISPR-Cas9 delivery, were strong predictors of gene-editing outcomes. These results suggest design principles for the development of materials and transfection strategies with lipid-based materials. This platform could be applied to rapidly optimize materials for gene-editing in a variety of cell/tissue types in order to advance genomic medicine, regenerative biology and drug discovery. CRISPR-Cas9 is a new gene-editing technology for "genome surgery" that is anticipated to treat genetic diseases. This technology uses multiple components of the Cas9 system to cut out disease-causing mutations in the human genome and precisely suture in therapeutic sequences. Biomaterials based delivery strategies could help transition these technologies to the clinic. The design space for materials based delivery strategies is vast and optimization is essential to ensuring the safety and efficacy of these treatments. Therefore, new methods are required to rapidly and systematically screen gene-editing efficacy in human cells. This work utilizes an innovative platform to generate and screen many formulations of synthetic biomaterials and components of the CRISPR-Cas9 system in parallel. On this platform, we watch genome surgery in action using high content image analysis. These capabilities enabled us to identify formulation parameters for Cas9-material complexes that can optimize gene-editing in a specific human cell type. Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Investigating the binding properties of porous drug delivery systems using nuclear sensors (radiotracers) and positron annihilation lifetime spectroscopy--predicting conditions for optimum performance.

PubMed

Mume, Eskender; Lynch, Daniel E; Uedono, Akira; Smith, Suzanne V

2011-06-21

Understanding how the size, charge and number of available pores in porous material influences the uptake and release properties is important for optimising their design and ultimately their application. Unfortunately there are no standard methods for screening porous materials in solution and therefore formulations must be developed for each encapsulated agent. This study investigates the potential of a library of radiotracers (nuclear sensors) for assessing the binding properties of hollow silica shell materials. Uptake and release of Cu(2+) and Co(2+) and their respective complexes with polyazacarboxylate macrocycles (dota and teta) and a series of hexa aza cages (diamsar, sarar and bis-(p-aminobenzyl)-diamsar) from the hollow silica shells was monitored using their radioisotopic analogues. Coordination chemistry of the metal (M) species, subtle alterations in the molecular architecture of ligands (Ligand) and their resultant complexes (M-Ligand) were found to significantly influence their uptake over pH 3 to 9 at room temperature. Positively charged species were selectively and rapidly (within 10 min) absorbed at pH 7 to 9. Negatively charged species were preferentially absorbed at low pH (3 to 5). Rates of release varied for each nuclear sensor, and time to establish equilibrium varied from minutes to days. The subtle changes in design of the nuclear sensors proved to be a valuable tool for determining the binding properties of porous materials. The data support the development of a library of nuclear sensors for screening porous materials for use in optimising the design of porous materials and the potential of nuclear sensors for high through-put screening of materials.

Milestone 4: Test plan for Reusable Hydrogen Composite Tank System (RHCTS). Task 3: Composite tank materials

NASA Technical Reports Server (NTRS)

Greenberg, H. S.

1994-01-01

This document is the detailed test plan for the series of tests enumerated in the preceding section. The purpose of this plan is to present the test objectives, test parameters and procedures, expected performance and data analysis plans, criteria for success, test schedules, and related safety provisions and to describe the test articles, test instrumentation, and test facility requirements. Initial testing will be performed to screen four composite materials for suitability for SSTO LH2 tank loads and environmental conditions. The laminates for this testing will be fabricated by fiber placement, which is the manufacturing approach identified as baseline for the tank wall. Even though hand layup will be involved in fabricating many of the internal structural members of the tank, no hand-layup laminates will be evaluated in the screening or subsequent characterization testing. This decision is based on the understanding that mechanical properties measured for hand-layup material should be at least equivalent to properties measured for fiber-placed material, so that the latter should provide no less than a conservative approximation of the former. A single material will be downselected from these screening tests. This material will be subsequently characterized for impact-damage tolerance and durability under conditions of mechanical and thermal cycling, and to establish a preliminary design database to support ongoing analysis. Next, testing will be performed on critical structural elements fabricated from the selected material. Finally, the 8-foot diameter tank article, containing the critical structural features of the full-scale tank, will be fabricated by fiber placement and tested to verify its structural integrity and LH2 containment.

Shortcomings in bladder cancer etiology research and a model for its prevention.

PubMed

Radosavljevic, Vladan; Belojevic, Goran

2014-01-01

Bladder cancer (BC) is the most expensive cancer to treat. Its incidence and mortality have not decreased in the last three decades. Numerous uncertainties are still surrounding the etiology of BC. There is a need for a low-cost screening test for BC that would be applicable for early detection in asymptomatic persons, a test that would preferably be noninvasive and have satisfactory sensitivity and specificity. The first part of this paper addresses critical issues in the research into BC etiology, which we classified as entrances, toxicity and metabolism, amounts, and duration of exposure to carcinogens in the bladder. In the second part, based on the proven risk factors for BC, we present a simple scoring system as part of a new BC screening method. The heterogeneous results of studies on BC etiology are largely due to a lack of research into the compounds (and their mutual interactions) present in the urinary bladder, carcinogens absorbed through the skin and/or inhaled, and the daily dynamics of exposure to exogenous risk factors. We have calculated a score for BC screening which is an integral component of a new, four-level system of BC prevention. Interactions of carcinogens and their daily dynamics deserve more attention in further clarifying BC etiology. New attempts in BC screening should be focused on urine content analyses (carcinogens, antioxidants, vitamins, minerals) and not only on hematuria and currently used biomarkers. We propose a score for BC pre-evaluation and recruitment for screening and a new model of BC prevention.

An in vitro evaluation of some unconventional ruminant feeds in terms of the organic matter digestibility, energy and microbial biomass.

PubMed

Al-Masri, M R

2003-04-01

In vitro organic matter apparent digestibility (IVOMAD), true digestibility (IVOMTD), metabolizable energy (ME), net energy lactation (NEL), microbial nitrogen (MN) and synthesis of microbial biomass (MBM) were estimated to predict the nutritive values of some agricultural by-products, drought-tolerant range plants and browses. The relationships between in vitro gas production (GP), and true or apparent digestibility. MN and MBM were studied utilizing an in vitro incubation technique. The values of IVOMAD, IVOMTD, ME, NEL, GP, MBM and MN varied with the studied experimental materials. The true fermentation of the outside part of Atriplex leucoclada produced a higher volume of gas than the middle or the inside parts, and this was associated with an increase in the values of IVOMAD, IVOMTD, ME and NEL. However, screening off the wood from olive cake to obtain olive cake pulp increased the IVOMAD, IVOMTD, ME, NEL and the volume of gas production from the true fermented material. One ml of gas was generated from the true degradation of 5 mg of wheat straw, Moringa oleifera, Alhagi camelorum, Eucaliptus camaldulensis and A. leucoclada, from 11 mg of Prosopsis stephaniana and olive cake pulp, and from 20 mg of olive cake or olive cake wood. The amount of MN or MBM produced from 100 mg of truly fermented organic matter depended on the kind of the fermented material and amounted to 0.7-2.9 mg or 8-34 mg, respectively. Crude fibre was negatively correlated to IVOMAD, IVOMTD, ME and NEL. Gas production was positively correlated to IVOMAD and IVOMTD but negatively correlated to MBM and MN.