DYNSYL: a general-purpose dynamic simulator for chemical processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patterson, G.K.; Rozsa, R.B.

1978-09-05

Lawrence Livermore Laboratory is conducting a safeguards program for the Nuclear Regulatory Commission. The goal of the Material Control Project of this program is to evaluate material control and accounting (MCA) methods in plants that handle special nuclear material (SNM). To this end we designed and implemented the dynamic chemical plant simulation program DYNSYL. This program can be used to generate process data or to provide estimates of process performance; it simulates both steady-state and dynamic behavior. The MCA methods that may have to be evaluated range from sophisticated on-line material trackers such as Kalman filter estimators, to relatively simplemore » material balance procedures. This report describes the overall structure of DYNSYL and includes some example problems. The code is still in the experimental stage and revision is continuing.« less

78 FR 48726 - Placement of the Georgia Agreement State Program on Probation

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-09

... the Integrated Materials Performance Evaluation Program (IMPEP). The Management Review Board (MRB), in... CONTACT: Lisa Dimmick, Office of Federal and State Materials and Environmental Management Programs, U.S... Agreement State radiation control programs, using performance indicators, to ensure that public health and...

Materials and Area of Study for Advanced Placement Program in American History.

ERIC Educational Resources Information Center

Santos, Peter A.

This paper describes and evaluates benefits of advanced placement programs and identifies materials which can help high school history classroom teachers develop effective advanced placement programs. An advanced placement program is defined as a program which requires a student to do extensive research and writing throughout the school year.…

Experimental field test of proposed anti-dart-out training programs. Volume 2, Implementation guidelines and program materials

DOT National Transportation Integrated Search

1981-12-01

This report (Volume 2 of three volumes) provides detailed descriptions of all program materials employed with the recommended version of a child pedestrian safety program. Volume 1 of this report describes the conduct and results of the evaluation of...

7 CFR 225.15 - Management responsibilities of sponsors.

Code of Federal Regulations, 2014 CFR

2014-01-01

... forms. Application forms or descriptive materials given to households about applying for free meals must... evaluate, fund, or determine benefits for their programs, and with auditors for program reviews and law... programs to help them evaluate, fund, or determine benefits for their programs; auditors for program...

Flammability, Odor, Offgassing, and Compatibility Requirements and Test Procedures for Materials in Environments that Support Combustion

NASA Technical Reports Server (NTRS)

1998-01-01

This handbook establishes NASA program requirements for evaluation, testing, and selection of materials to preclude unsafe conditions related to flammability, odor, offgassing, and fluid compatibility. Materials intended for use in space vehicles, specified test facilities, and specified ground support equipment (GSE) must meet the requirements of this document. Additional materials performance requirements may be specified in other program or NASA center specific documentation. Responsible NASA centers materials organizations must include applicable requirements of this document in their materials control programs. Materials used in habitable areas of spacecraft, including the materials of the spacecraft, stowed equipment, and experiments, must be evaluated for flammability, odor, and offgassing characteristics. All materials used in other areas must be evaluated for flammability characteristics. In addition, materials that are exposed to liquid oxygen (LOX), gaseous oxygen (GOX), and other reactive fluids' must be evaluated for compatibility with the fluid in their use application. Materials exposed to pressurized breathing gases also must be evaluated for odor and offgassing characteristics. The worst-case anticipated use environment (most hazardous pressure, temperature, material thickness, and fluid exposure conditions) must be used in the evaluation process. Materials that have been shown to meet the criteria of the required tests are acceptable for further consideration in design. Whenever possible, materials should be selected that have already been shown to meet the test criteria in the use environment. Existing test data are compiled in the NASA Marshall Space Flight Center (MSFC) Materials and Processes Technical Information System (MAPTIS) and published periodically as the latest revision of a joint document with Johnson Space Center (JSC), MSFC-HDBK-527/JSC 09604. MAPTIS can be accessed by computer datalink. Systems containing materials that have not been tested or do not meet the criteria of the required tests must be verified to be acceptable in the use configuration by analysis or testing. This verification rationale must be documented and submitted to the responsible NASA center materials organization for approval.

Evaluation of nonmetallic thermal protection materials for the manned space shuttle. Volume 1, task 1: Assessment of technical risks associated with utilization of nonmetallic thermal protection system

NASA Technical Reports Server (NTRS)

Wilkinson, W. H.; Kirkhart, F. P.; Kistler, C. W.; Duckworth, W. H.; Ungar, E. W.; Foster, E. L.

1970-01-01

Technical problems of design and flight qualification of the proposed classes of surface insulation materials and leading edge materials were reviewed. A screening test plan, a preliminary design data test plan and a design data test plan were outlined. This program defined the apparent critical differences between the surface insulators and the leading edge materials, structuring specialized screening test plans for each of these two classes of materials. Unique testing techniques were shown to be important in evaluating the structural interaction aspects of the surface insulators and a separate task was defined to validate the test plan. In addition, a compilation was made of available information on proposed material (including metallic TPS), previous shuttle programs, pertinent test procedures, and other national programs of merit. This material was collected and summarized in an informally structured workbook.

Nutrition Education Resource Guide: An Annotated Bibliography of Educational Materials for the WIC and CSF Programs. Bibliographies and Literature of Agriculture Number 24.

ERIC Educational Resources Information Center

McLaughlin, Elaine Casserly, Comp.; And Others

This resource guide to evaluated print and audiovisual nutrition materials has been developed to assist state and local staff of the Special Supplemental Program for Women, Infants and Children (WIC) and the Commodity Supplemental Foods Program (CSFP), in selecting, acquiring, and developing accurate and appropriate materials for nutrition…

Evaluating Injury Prevention Programs: The Oklahoma City Smoke Alarm Project.

ERIC Educational Resources Information Center

Mallonee, Sue

2000-01-01

Illustrates how evaluating the Oklahoma City Smoke Alarm Project increased its success in reducing residential fire-related injuries and deaths. The program distributed and tested smoke alarms in residential dwellings and offered educational materials on fire prevention and safety. Evaluation provided sound data on program processes and outcomes,…

Integrated Solar Upper Stage Technical Support

NASA Technical Reports Server (NTRS)

Jaworske, Donald A.

1998-01-01

NASA Lewis Research Center is participating in the Integrated Solar Upper Stage (ISUS) program. This program is a ground-based demonstration of an upper stage concept that will be used to generate both solar propulsion and solar power. Solar energy collected by a primary concentrator is directed into the aperture of a secondary concentrator and further concentrated into the aperture of a heat receiver. The energy stored in the receiver-absorber-converter is used to heat hydrogen gas to provide propulsion during the orbital transfer portion of the mission. During the balance of the mission, electric power is generated by thermionic diodes. Several materials issues were addressed as part of the technical support portion of the ISUS program, including: 1) Evaluation of primary concentrator coupons; 2) Evaluation of secondary concentrator coupons; 3) Evaluation of receiver-absorber-converter coupons; 4) Evaluation of in-test witness coupons. Two different types of primary concentrator coupons were evaluated from two different contractors-replicated coupons made from graphite-epoxy composite and coupons made from microsheet glass. Specular reflectivity measurements identified the replicated graphite-epoxy composite coupons as the primary concentrator material of choice. Several different secondary concentrator materials were evaluated, including a variety of silver and rhodium reflectors. The specular reflectivity of these materials was evaluated under vacuum at temperatures up to 800 C. The optical properties of several coupons of rhenium on graphite were evaluated to predict the thermal performance of the receiver-absorber-converter. Finally, during the ground test demonstration, witness coupons placed in strategic locations throughout the thermal vacuum facility were evaluated for contaminants. All testing for the ISUS program was completed successfully in 1997. Investigations related to materials issues have proven helpful in understanding the operation of the test article, leading to a potential ISUS flight test in 2002.

Instructional Resources and Materials for Business-Spanish Courses.

ERIC Educational Resources Information Center

Cere, Ronald

The program, curriculum, and materials needed to provide business Spanish training are described, and the available instructional materials are reviewed and listed. In developing a business Spanish program, decisions must be made regarding goals, content, structure, instructional format, evaluation procedures, and target population. The content of…

Development of improved ablative materials for ASRM. [Advanced Solid Rocket Motor

NASA Technical Reports Server (NTRS)

Canfield, A.; Armour, W.; Clinton, R.

1991-01-01

A program to improve ablative materials for the Advanced Solid Rocket Motor (ASRM) is briefly discussed. The main concerns with the baseline material are summarized along with the measures being undertaken to obtain improvements. The materials involved in the program, all of which have been manufactured and are now being evaluated, are mentioned.

Evaluation of safety belt education program for employees

DOT National Transportation Integrated Search

1980-06-01

This research was designed to determine the effectiveness of a nine-month safety belt educational program, utilizing various informational materials developed by NHTSA, in increasing safety belt usage among corporate employees. The materials used inc...

Development of test methods for textile composites

NASA Technical Reports Server (NTRS)

Masters, John E.; Ifju, Peter G.; Fedro, Mark J.

1993-01-01

NASA's Advanced Composite Technology (ACT) Program was initiated in 1990 with the purpose of developing less costly composite aircraft structures. A number of innovative materials and processes were evaluated as a part of this effort. Chief among them are composite materials reinforced with textile preforms. These new forms of composite materials bring with them potential testing problems. Methods currently in practice were developed over the years for composite materials made from prepreg tape or simple 2-D woven fabrics. A wide variety of 2-D and 3-D braided, woven, stitched, and knit preforms were suggested for application in the ACT program. The applicability of existing test methods to the wide range of emerging materials bears investigation. The overriding concern is that the values measured are accurate representations of the true material response. The ultimate objective of this work is to establish a set of test methods to evaluate the textile composites developed for the ACT Program.

Cognitive Restructuring through Dreams and Imagery: Descriptive Analysis of a Women's Prison-Based Program

ERIC Educational Resources Information Center

DeHart, Dana

2010-01-01

This report describes process and outcome evaluation of an innovative program based in a women's maximum-security correctional facility. Methodology included review of program materials, unobtrusive observation of group process, participant evaluation forms, focus groups, and individual interviews with current and former program participants.…

Volunteers in Education: Materials for Volunteer Programs and the Volunteer.

ERIC Educational Resources Information Center

Department of Health, Education, and Welfare, Washington, DC. Office of Citizen Participation.

This publication contains materials which have been developed, adapted, and utilized by school volunteer programs. Under program operation and coordination, there are: (1) plans for recruiting, speaking, and youth tutoring youth; and (2) sample application, request, and evaluation forms and guidelines for reading volunteers, school volunteer…

First Year Evaluation of the Mathematics Pilot Programs, Grades K-8, [and] Appendices. Evaluation Department Report No. 381.

ERIC Educational Resources Information Center

Tomblin, Elizabeth A.; And Others

The San Diego Board of Education requested that pilot programs be conducted with commercially developed (Grades K-8) mathematics textbooks and programs in order to determine which of the programs/texts were superior, and whether a district-developed program could successfully compete with commercially produced materials. The pilot program…

Evaluation and use of the Materials and Test (MATT) Data System for quality of construction and management review : final report.

DOT National Transportation Integrated Search

1985-12-01

This report documents the review of the MATerials and Test (MATT) Data System to check the validity of data within the system. A computer program to generate the quality level of a construction material was developed. Programs were also developed to ...

Performance testing of elastomeric seal materials under low and high temperature conditions: Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

BRONOWSKI,DAVID R.

The US Department of Energy Offices of Defense Programs and Civilian Radioactive Waste Management jointly sponsored a program to evaluate elastomeric O-ring seal materials for radioactive material shipping containers. The report presents the results of low- and high-temperature tests conducted on 27 common elastomeric compounds.

TOXICITY TESTING, RISK ASSESSMENT, AND OPTIONS FOR DREDGED MATERIAL MANAGEMENT

EPA Science Inventory

Programs for evaluating proposed discharges of dredged material into waters of the United States specify a tiered testing and evaluation protocol that includes performance of acute and chronic bioassays to assess toxicity of the dredged sediments. Although these evaluations refl...

Innovative and Community-Guided Evaluation and Dissemination of a Prostate Cancer Education Program for African-American Men and Women

PubMed Central

Jackson, Dawnyea D.; Owens, Otis L.; Friedman, Daniela B.; Dubose-Morris, Ragan

2014-01-01

African Americans (AA) are more likely to develop and die from cancer than any other racial or ethnic group. The aims of this research were to: (1) evaluate current education materials being implemented in a community-based prostate cancer education program for AA communities; (2) refine materials based on findings from Aim 1; (3) share updated materials with participants from Aim 1 for additional improvements; and (4) disseminate and evaluate the improved education program through a statewide videoconference with AA men and women. AA individuals evaluated the current education program through a mail survey (n=32) and community forum (n=38). Participants reported that the existing prostate cancer education program content could be understood by lay persons, but recommendations for improvement were identified. They included: defining unknown and/or scientific terminology, increasing readability by increasing font size and enlarging images, and including more recent and relevant statistics. Following refinement of the education materials based on survey and forum feedback, a statewide videoconference was implemented. Following the videoconference, participants (25 men; 3 women) reported that they would encourage others to learn more about prostate cancer, talk to their doctor about whether or not to get screened for prostate cancer, and would recommend the conference to others. There is great potential for using this type of iterative approach to education program development with community and clinical partners for others conducting similar work. PMID:25510370

Regional Interstate Planning Project Program . . . Vol. IX. California Program Evaluation Improvement Project. Seminar Report.

ERIC Educational Resources Information Center

Dearmin, Evalyn, Ed.; And Others

Program evaluation strategies and techniques based on materials developed by the California Evaluation Improvement Project were discussed at this meeting of the Regional Interstate Planning Project (RIPP). RIPP members represent the State Departments of Education of ten western states, and have met periodically over the past nine years to discuss…

A computer program incorporating fatigue and fracture criteria in the preliminary design of transport aircraft: An evaluation

NASA Technical Reports Server (NTRS)

Berger, P. E.; Thornton, E. A.

1976-01-01

The APAS program a multistation structural synthesis procedure developed to evaluate material, geometry, and configuration with various design criteria usually considered for the primary structure of transport aircraft is described and evaluated. Recommendations to improve accuracy and extend the capabilities of the APAS program are given. Flow diagrams are included.

Materials technology assessment for stirling engines

NASA Technical Reports Server (NTRS)

Stephens, J. R.; Witzke, W. R.; Watson, G. K.; Johnston, J. R.; Croft, W. J.

1977-01-01

A materials technology assessment of high temperature components in the improved (metal) and advanced (ceramic) Stirling engines was undertaken to evaluate the current state-of-the-art of metals and ceramics, identify materials research and development required to support the development of automotive Stirling engines, and to recommend materials technology programs to assure material readiness concurrent with engine system development programs. The most critical component for each engine is identified and some of the material problem areas are discussed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Price, Jeffrey

Solar Turbines Incorporated (Solar), under cooperative agreement number DE-FC26-0CH11049, has conducted development activities to improve the durability of the Mercury 50 combustion system to 30,000 hours life and reduced life cycle costs. This project is part of Advanced Materials in the Advanced Industrial Gas Turbines program in DOE's Office of Distributed Energy. The targeted development engine was the Mercury{trademark} 50 gas turbine, which was developed by Solar under the DOE Advanced Turbine Systems program (DOE contract number DE-FC21-95MC31173). As a generator set, the Mercury 50 is used for distributed power and combined heat and power generation and is designed tomore » achieve 38.5% electrical efficiency, reduced cost of electricity, and single digit emissions. The original program goal was 20,000 hours life, however, this goal was increased to be consistent with Solar's standard 30,000 hour time before overhaul for production engines. Through changes to the combustor design to incorporate effusion cooling in the Generation 3 Mercury 50 engine, which resulted in a drop in the combustor wall temperature, the current standard thermal barrier coated liner was predicted to have 18,000 hours life. With the addition of the advanced materials technology being evaluated under this program, the combustor life is predicted to be over 30,000 hours. The ultimate goal of the program was to demonstrate a fully integrated Mercury 50 combustion system, modified with advanced materials technologies, at a host site for a minimum of 4,000 hours. Solar was the Prime Contractor on the program team, which includes participation of other gas turbine manufacturers, various advanced material and coating suppliers, nationally recognized test laboratories, and multiple industrial end-user field demonstration sites. The program focused on a dual path development route to define an optimum mix of technologies for the Mercury 50 and future gas turbine products. For liner and injector development, multiple concepts including high thermal resistance thermal barrier coatings (TBC), oxide dispersion strengthened (ODS) alloys, continuous fiber ceramic composites (CFCC), and monolithic ceramics were evaluated before down-selection to the most promising candidate materials for field evaluation. Preliminary, component and sub-scale testing was conducted to determine material properties and demonstrate proof-of-concept. Full-scale rig and engine testing was used to validated engine performance prior to field evaluation at a Qualcomm Inc. cogeneration site located in San Diego, California. To ensure that the CFCC liners with the EBC proposed under this program would meet the target life, field evaluations of ceramic matrix composite liners in Centaur{reg_sign} 50 gas turbine engines, which had previously been conducted under the DOE sponsored Ceramic Stationary Gas Turbine program (DE-AC02-92CE40960), was continued under this program at commercial end-user sites under Program Subtask 1A - Extended CFCC Materials Durability Testing. The goal of these field demonstrations was to demonstrate significant component life, with milestones of 20,000 and 30,000 hours. Solar personnel monitor the condition of the liners at the field demonstration sites through periodic borescope inspections and emissions measurements. This program was highly successful at evaluating advanced materials and down-selecting promising solutions for use in gas turbine combustions systems. The addition of the advanced materials technology has enabled the predicted life of the Mercury 50 combustion system to reach 30,000 hours, which is Solar's typical time before overhaul for production engines. In particular, a 40 mil thick advanced Thermal Barrier Coating (TBC) system was selected over various other TBC systems, ODS liners and CFCC liners for the 4,000-hour field evaluation under the program. This advanced TBC is now production bill-of-material at various thicknesses up to 40 mils for all of Solar's advanced backside-cooled combustor liners (Centaur 50, Taurus 60, Mars 100, Taurus 70, Taurus 65, Titan 130, Titan 250 and Mercury 50). This TBC coating system significantly outperformed all other TBC systems evaluated under the program. The initial field unit, with the 40 mil advanced TBC developed under this program, has far exceeded the 4,000-hour requirement of the program, accumulating over 20,000 hours of commercial operation at Qualcomm Inc. in San Diego, CA. The 40 mil advanced TBC remains in excellent condition, with no evidence of chipping or spalling. The engine will continue operation until the unit is due for overhaul at approximately 30,000 hours. The Oxide Dispersion Strengthened (ODS) alloy injector tip testing and evaluation was also successful, however, the ODS injector tip development on this program was terminated, primarily due to the fact that the Mercury 50 injector tip was redesigned (Generation 3) by Combustion Engineering.« less

Summative Evaluation Findings from the Interstellar Boundary Explorer (IBEX) Education and Public Outreach Program

NASA Astrophysics Data System (ADS)

Bartolone, L.; Nichols-Yehling, M.; Davis, H. B.; Davey, B.

2014-07-01

The Interstellar Boundary Explorer mission includes a comprehensive Education and Public Outreach (EPO) program in heliophysics that is overseen and implemented by the Adler Planetarium and evaluated by Technology for Learning Consortium, Inc. Several components of the IBEX EPO program were developed during the prime phase of the mission that were specifically designed for use in informal institutions, especially museums and planetaria. The program included a widely distributed planetarium show with accompanying informal education activities, printed posters, lithographs and other resources, funding for the development of the GEMS Space Science Sequence for Grades 6-8 curriculum materials, development of the IBEX mission website, development of materials for people with special needs, participation in the Heliophysics Educator Ambassador program, and support for the Space Explorers Afterschool Science Club for Chicago Public Schools. In this paper, we present an overview of the IBEX EPO program summative evaluation techniques and results for 2008 through 2012.

Short Wavelength Laser/Materials Interactions

DTIC Science & Technology

1989-12-20

lasterials interaction phenomena and effects, and 4) materials evaluation. The program has led to major advances in science-based understanding of...3.0 RESULTS 5 3.1 MATERIALS SELECTION and CHARACTERIZATION 5 3.2 DEVELOPMENT of NEW INSTRUMENTATION 8 3.2.1 Laser Sources 8 3.2.2 Multiwavelength ...high temperature during laser irradiation. The program has led to major advances in science-based understanding of materials performance under extreme

PERMEATION OF MULTIFUNCTIONAL ACRYLATES THROUGH SELECTED PROTECTIVE GLOVE MATERIALS

EPA Science Inventory

In support of the Premanufacture Notification (PMN) program of the Environmental Protection Agency's Office of Toxic Substances, the resistance of three glove materials to permeation by multifunctional acrylate compounds was evaluated through a program for the Office of Research ...

A testing program to evaluate the effects of simulant mixed wastes on plastic transportation packaging components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nigrey, P.J.; Dickens, T.G.; Dickman, P.T.

1997-08-01

Based on regulatory requirements for Type A and B radioactive material packaging, a Testing Program was developed to evaluate the effects of mixed wastes on plastic materials which could be used as liners and seals in transportation containers. The plastics evaluated in this program were butadiene-acrylonitrile copolymer (Nitrile rubber), cross-linked polyethylene, epichlorohydrin, ethylene-propylene rubber (EPDM), fluorocarbons, high-density polyethylene (HDPE), butyl rubber, polypropylene, polytetrafluoroethylene, and styrene-butadiene rubber (SBR). These plastics were first screened in four simulant mixed wastes. The liner materials were screened using specific gravity measurements and seal materials by vapor transport rate (VTR) measurements. For the screening of linermore » materials, Kel-F, HDPE, and XLPE were found to offer the greatest resistance to the combination of radiation and chemicals. The tests also indicated that while all seal materials passed exposure to the aqueous simulant mixed waste, EPDM and SBR had the lowest VTRs. In the chlorinated hydrocarbon simulant mixed waste, only Viton passed the screening tests. In both the simulant scintillation fluid mixed waste and the ketone mixture waste, none of the seal materials met the screening criteria. Those materials which passed the screening tests were subjected to further comprehensive testing in each of the simulant wastes. The materials were exposed to four different radiation doses followed by exposure to a simulant mixed waste at three temperatures and four different exposure times (7, 14, 28, 180 days). Materials were tested by measuring specific gravity, dimensional, hardness, stress cracking, VTR, compression set, and tensile properties. The second phase of this Testing Program involving the comprehensive testing of plastic liner has been completed and for seal materials is currently in progress.« less

Monolithic catalyst beds for hydrazine reactors

NASA Technical Reports Server (NTRS)

1973-01-01

A monolithic catalyst bed for monopropellant hydrazine decomposition was evaluated. The program involved the evaluation of a new hydrazine catalyst concept wherein open-celled foamed materials are used as supports for the active catalysts. A high-surface-area material is deposited upon the open-celled foamed material and is then coated with an active metal to provide a spontaneous catalyst. Only a fraction of the amount of expensive active metal in currently available catalysts is needed to promote monolithic catalyst. Numerous parameters were evaluated during the program, and the importance of additional parameters became obvious only while the program was in progress. A demonstration firing (using a 2.2-Newton (N)(0.5-lbf) reactor) successfully accumulated 7,700 seconds of firing time and 16 ambient temperature starts without degradation. Based on the excellent results obtained throughout the program and the demonstrated life capability of the monolithic foam, it is recommended that additional studies be conducted to further exploit the advantages of this concept.

75 FR 69086 - Submission for OMB review; comment request; NCCAM Office of Communications and Public Liaison...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-10

...) formative and (2) evaluative research of a variety of print and online materials, outreach activities, and... evaluative research on existing materials and messages, as part of OCPL's ongoing effort to develop a comprehensive program of testing and evaluation of all of its communications strategies. This evaluative...

75 FR 61763 - Submission for OMB Review; Comment Request; NCCAM Office of Communications and Public Liaison...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-06

...) formative and (2) evaluative research of a variety of print and online materials, outreach activities, and... evaluative research on existing materials and messages, as part of OCPL's ongoing effort to develop a comprehensive program of testing and evaluation of all of its communications strategies. This evaluative...

Outer Space...Calling All Readers. 1991 Summer Reading Program Manual.

ERIC Educational Resources Information Center

North Carolina State Dept. of Cultural Resources, Raleigh. Div. of State Library.

This manual provides guidelines and materials for librarians planning a summer reading program for children in North Carolina on the theme of outer space. An evaluation form to be returned to the State Library of North Carolina at the end of the summer is included. The introduction includes discussions of summer reading materials and programs;…

Designing Effective EPO Products for Museums: Preliminary Evaluation Findings from the Interstellar Boundary Explorer (IBEX) EPO Program

NASA Astrophysics Data System (ADS)

Nichols, M.; Bartolone, L.; Baldassari, C.; Hoyer-Winfield, S.

2011-09-01

The Interstellar Boundary Explorer (IBEX) mission includes a comprehensive EPO program in astronomy and heliophysics that is overseen and implemented by the Adler Planetarium in Chicago, Illinois. Several EPO components were developed specifically for informal institutions, especially museums and planetaria. The program includes an internationally distributed planetarium show with accompanying informal educational materials. Our evaluator, the Program Evaluation and Research Group (PERG) at Lesley University, Cambridge, Massachusetts, assesses the effectiveness of the EPO program. In late 2009 through early 2010, more than 70 planetaria worldwide received the IBEX planetarium show. Of the many U.S. planetaria, the first 25 received the IBEX planetarium show and were offered the opportunity to receive, at no charge, accompanying informal education materials, including posters, lithographs, demonstration materials, lesson plans, and more. In Spring 2010, PERG staff conducted a study designed to gauge the effectiveness of the distribution process for the planetarium show, gather information on the professional development needs of the organizations, and document reactions of museum staff to the IBEX informal education materials and their usefulness as companion pieces to the planetarium show. In this paper, we will present preliminary findings of this particular study, in the hopes that future EPO work can make use of data in this report.

Program Impact Evaluations: An Introduction for Managers of Title VII Projects. A Draft Guidebook.

ERIC Educational Resources Information Center

Bissell, Joan S.

Intended to assist administrators in the planning, management, and utilization of evaluation, this guidebook is designed as an introduction and supplement to other evaluation materials for bilingual education programs being developed under federal sponsorship, including evaluation models for Title VII projects. General information is provided on…

Evaluation program for secondary spacecraft cells: Initial evaluation tests of Eagle-Picher Industries, Incorporated 6.0 ampere-hour, nickel-cadmium spacecraft cells for separator material evaluation

NASA Technical Reports Server (NTRS)

Harkness, J. D.

1975-01-01

Several groups of nickel cadmium cells were tested for the durability of their separator materials. The cells were rated at 6.0 ampere-hours, and contained double ceramic seals. Two cells in each group were fitted with pressure gauge assemblies. Results are presented for various brands of separator materials.

Program for the development of high temperature electrical materials and components

NASA Technical Reports Server (NTRS)

Neff, W. S.; Lowry, L. R.

1972-01-01

Evaluation of high temperature, space-vacuum performance of selected electrical materials and components, high temperature capacitor development, and evaluation, construction, and endurance testing of compression sealed pyrolytic boron nitride slot insulation are described. The first subject above covered the aging evaluation of electrical devices constructed from selected electrical materials. Individual materials performances were also evaluated and reported. The second subject included study of methods of improving electrical performance of pyrolytic boron nitride capacitors. The third portion was conducted to evaluate the thermal and electrical performance of pyrolytic boron nitride as stator slot liner material under varied temperature and compressive loading. Conclusions and recommendations are presented.

The vehicle design evaluation program - A computer-aided design procedure for transport aircraft

NASA Technical Reports Server (NTRS)

Oman, B. H.; Kruse, G. S.; Schrader, O. E.

1977-01-01

The vehicle design evaluation program is described. This program is a computer-aided design procedure that provides a vehicle synthesis capability for vehicle sizing, external load analysis, structural analysis, and cost evaluation. The vehicle sizing subprogram provides geometry, weight, and balance data for aircraft using JP, hydrogen, or methane fuels. The structural synthesis subprogram uses a multistation analysis for aerodynamic surfaces and fuselages to develop theoretical weights and geometric dimensions. The parts definition subprogram uses the geometric data from the structural analysis and develops the predicted fabrication dimensions, parts material raw stock buy requirements, and predicted actual weights. The cost analysis subprogram uses detail part data in conjunction with standard hours, realization factors, labor rates, and material data to develop the manufacturing costs. The program is used to evaluate overall design effects on subsonic commercial type aircraft due to parameter variations.

Evaluation of National Geographic School Publishing Nonfiction Literacy Materials. Summary Report.

ERIC Educational Resources Information Center

Metcalf, Kim K.; Smith, Carl B.; Legan, Natalie A.

During the 2001-02 academic year, a purposive, national evaluation was undertaken of "Windows on Literacy" and "Reading Expeditions," two new school-based programs produced by the School Publishing Division of the National Geographic Society (NGS). The evaluation sought to determine the efficacy of the new materials for…

Blade System Design Study. Part II, final project report (GEC).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Griffin, Dayton A.

2009-05-01

As part of the U.S. Department of Energy's Low Wind Speed Turbine program, Global Energy Concepts LLC (GEC)1 has studied alternative composite materials for wind turbine blades in the multi-megawatt size range. This work in one of the Blade System Design Studies (BSDS) funded through Sandia National Laboratories. The BSDS program was conducted in two phases. In the Part I BSDS, GEC assessed candidate innovations in composite materials, manufacturing processes, and structural configurations. GEC also made recommendations for testing composite coupons, details, assemblies, and blade substructures to be carried out in the Part II study (BSDS-II). The BSDS-II contract periodmore » began in May 2003, and testing was initiated in June 2004. The current report summarizes the results from the BSDS-II test program. Composite materials evaluated include carbon fiber in both pre-impregnated and vacuum-assisted resin transfer molding (VARTM) forms. Initial thin-coupon static testing included a wide range of parameters, including variation in manufacturer, fiber tow size, fabric architecture, and resin type. A smaller set of these materials and process types was also evaluated in thin-coupon fatigue testing, and in ply-drop and ply-transition panels. The majority of materials used epoxy resin, with vinyl ester (VE) resin also used for selected cases. Late in the project, testing of unidirectional fiberglass was added to provide an updated baseline against which to evaluate the carbon material performance. Numerous unidirectional carbon fabrics were considered for evaluation with VARTM infusion. All but one fabric style considered suffered either from poor infusibility or waviness of fibers combined with poor compaction. The exception was a triaxial carbon-fiberglass fabric produced by SAERTEX. This fabric became the primary choice for infused articles throughout the test program. The generally positive results obtained in this program for the SAERTEX material have led to its being used in innovative prototype blades of 9-m and 30-m length, as well as other non-wind related structures.« less

Nondestructive Evaluation of Airport Pavements. Volume I. Program References,

DTIC Science & Technology

1979-09-01

greater than its original capacity (see test 13 on Fig. 2.5). During the material tests by Majidzadeh, the dynamic E-value of frozen subgrade soil was...Sample the base and subbase material by conventional spoon and identify the material by standard soil -aggregate classification and penetration...such as shaker table. The new testing specification is designed for all paving materials including subgrade soils . The specifications of material

CARES/Life Ceramics Durability Evaluation Software Used for Mars Microprobe Aeroshell

NASA Technical Reports Server (NTRS)

Nemeth, Noel N.

1998-01-01

The CARES/Life computer program, which was developed at the NASA Lewis Research Center, predicts the probability of a monolithic ceramic component's failure as a function of time in service. The program has many features and options for materials evaluation and component design. It couples commercial finite element programs-which resolve a component's temperature and stress distribution-to-reliability evaluation and fracture mechanics routines for modeling strength-limiting defects. These routines are based on calculations of the probabilistic nature of the brittle material's strength. The capability, flexibility, and uniqueness of CARES/Life has attracted many users representing a broad range of interests and has resulted in numerous awards for technological achievements and technology transfer.

Impact Properties of Metal Fan Containment Materials Being Evaluated for the High-Speed Civil Transport (HSCT)

NASA Technical Reports Server (NTRS)

1996-01-01

Under the Enabling Propulsion Materials (EPM) program - a partnership between NASA, Pratt & Whitney, and GE Aircraft Engines - the Materials and Structures Divisions of the NASA Lewis Research Center are involved in developing a fan-containment system for the High-Speed Civil Transport (HSCT). The program calls for a baseline system to be designed by the end of 1995, with subsequent testing of innovative concepts. Five metal candidate materials are currently being evaluated for the baseline system in the Structures Division's Ballistic Impact Facility. This facility was developed to provide the EPM program with cost-efficient and timely impact test data. At the facility, material specimens are impacted at speeds up to 350 m/sec by projectiles of various sizes and shapes to assess the specimens' ability to absorb energy and withstand impact. The tests can be conducted at either room or elevated temperatures. Posttest metallographic analysis is conducted to improve understanding of the failure modes. A dynamic finite element program is used to simulate the events and both guide the testing as well as aid in designing the fan-containment system.

Rubric for Evaluating Reading/Language Arts Instructional Materials for Kindergarten to Grade 5. REL 2017-219

ERIC Educational Resources Information Center

Foorman, Barbara R.; Smith, Kevin G.; Kosanovich, Marcia L.

2017-01-01

The implementation of effective instructional materials, such as a core reading program, by a qualified teacher is an important part of improving students' reading achievement. But selecting those instructional materials can be time-consuming. Regional Educational Laboratory (REL) Southeast created this rubric for evaluating reading/language arts…

A Program for High School Social Studies: International Relations.

ERIC Educational Resources Information Center

Bloomington Public Schools, MN.

GRADES OR AGES: High school. SUBJECT MATTER: Social studies, International relations. ORGANIZATION AND PHYSICAL APPEARANCE: The introductory material covers the school district philosophy, a description of the program, major concepts for international relations, and techniques for evaluating objectives. Material is provided for six units…

Experienced Teacher Fellowship Program. Final Report.

ERIC Educational Resources Information Center

Wolansky, William D.; Cochran, Leslie H.

The Industrial Arts Fellowship Program provides an opportunity for 24 experienced teachers to pursue graduate study related to two occupational clusters: industrial materials and processes or energy and propulsion systems. As part of their studies, students developed, field tested, and evaluated curriculum materials which applied these evolving…

ETV Program Report: Coatings for Wastewater Collection Systems - Standard Cement Materials, Epoxy Coating 4553

EPA Science Inventory

The Standard Cement Materials, Inc. Standard Epoxy Coating 4553™ (SEC 4553) epoxy coating used for wastewater collection system rehabilitation was evaluated by EPA’s Environmental Technology Verification Program under laboratory conditions at the Center for Innovative Grouting Ma...

78 FR 43263 - Paperless Hazard Communications Pilot Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-19

... Research Division (PHH-23), Pipeline and Hazardous Materials Safety Administration, 1200 New Jersey Avenue... materials by air, highway, rail, and water) to test the feasibility and then evaluate both the feasibility... times and locations.'' On September 12, 2001, the Research and Special Programs Administration (the...

Sandia Dynamic Materials Program Strategic Plan.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flicker, Dawn Gustine; Benage, John F.; Desjarlais, Michael P.

2017-05-01

Materials in nuclear and conventional weapons can reach multi-megabar pressures and 1000s of degree temperatures on timescales ranging from microseconds to nanoseconds. Understanding the response of complex materials under these conditions is important for designing and assessing changes to nuclear weapons. In the next few decades, a major concern will be evaluating the behavior of aging materials and remanufactured components. The science to enable the program to underwrite decisions quickly and confidently on use, remanufacturing, and replacement of these materials will be critical to NNSA’s new Stockpile Responsiveness Program. Material response is also important for assessing the risks posed bymore » adversaries or proliferants. Dynamic materials research, which refers to the use of high-speed experiments to produce extreme conditions in matter, is an important part of NNSA’s Stockpile Stewardship Program.« less

Opportunities for the LWR ATF materials development program to contribute to the LBE-cooled ADS materials qualification program

NASA Astrophysics Data System (ADS)

Gong, Xing; Li, Rui; Sun, Maozhou; Ren, Qisen; Liu, Tong; Short, Michael P.

2016-12-01

Accelerator-driven systems (ADS) are a promising approach for nuclear waste disposal. Nevertheless, the principal candidate materials proposed for ADS construction, such as the ferritic/martensitic steel, T91, and austenitic stainless steels, 316L and 15-15Ti, are not fully compatible with the liquid lead-bismuth eutectic (LBE) coolant. Under some operating conditions, liquid metal embrittlement (LME) or liquid metal corrosion (LMC) may occur in these steels when exposed to LBE. These environmentally-induced material degradation effects pose a threat to ADS reactor safety, as failure of the materials could initiate a severe accident, in which fission products are released into the coolant. Meanwhile, parallel efforts to develop accident-tolerant fuels (ATF) in light water reactors (LWRs) could provide both general materials design philosophies and specific material solutions to the ADS program. In this paper, the potential contributions of the ATF materials development program to the ADS materials qualification program are evaluated and discussed in terms of service conditions and materials performance requirements. Several specific areas where coordinated development may benefit both programs, including composite materials and selected coatings, are discussed.

Summary report, Flexible VSR`s and VSR channel sleeve development programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kempf, F.J.

1963-11-15

(VSR = vertical safety rod.) This report summarizes results of development programs which have evaluated vertical rod channel sleeving materials and provided flexible vertical rods, acceptable for both interim use before rod channel sleeving, and for subsequent use in sleeved channels. B{sub 4}C is the rod material; graphite and Al oxide are among the sleeve materials.

Ceramic automotive Stirling engine program

NASA Technical Reports Server (NTRS)

1986-01-01

The Ceramic Automotive Stirling Engine Program evaluated the application of advanced ceramic materials to an automotive Stirling engine. The objective of the program was to evaluate the technical feasibility of utilizing advanced ceramics to increase peak engine operating temperature, and to evaluate the performance benefits of such an increase. Manufacturing cost estimates were also developed for various ceramic engine components and compared with conventional metallic engine component costs.

A Preliminary Evaluation of a School Support Program for Children with Autism Spectrum Disorders: Educator and School Level Outcomes and Program Processes

ERIC Educational Resources Information Center

McDougall, Janette; Servais, Michelle; Meyer, Katherine; Case, Sheila; Dannenhold, Kara; Johnson, Sue; Riggin, Colleen

2009-01-01

This is a preliminary evaluation of a program aimed at providing training, consultation, and resource materials to educators in public schools in order to build the capacity of those educators and schools to meet the needs of students with autism spectrum disorders. Educator and school level outcomes were evaluated and information about program…

Evaluation of Revised Second Grade, MANS Blue Level. Evaluation Report 8-B-2. Extended Pilot Trial of the Comprehensive School Mathematics Program.

ERIC Educational Resources Information Center

Dougherty, Knowles

The Comprehensive School Mathematics Program (CSMP) is a program of CEMREL, Inc., one of the national educational laboratories, and was funded by the National Institute of Education (NIE). Its major purpose is the development of curriculum materials for kindergarten through grade 6. This document is an extension of "Evaluation Report…

Improved ablative materials for the ASRM nozzle

NASA Technical Reports Server (NTRS)

Canfield, A.; Clinton, R. G.; Armour, W.; Koenig, J.

1992-01-01

Rayon precursor carbon-cloth phenolic was developed more than 30 years ago and is used in most nozzles today including the Poseidon, Trident, Peacekeeper, Small ICBM, Space Shuttle, and numerous tactical and space systems. Specifications and manufacturing controls were placed on these materials and, once qualified, a no-change policy was instituted. The current material is acceptable; however, prepreg variability does not always accommodate the requirements of automation. The advanced solid rocket motor requires material with less variability for automated manufacturing. An advanced solid rocket motor materials team, composed of NASA, Thiokol, Aerojet, SRI, and Lockheed specialists, along with materials suppliers ICI Fiberite/Polycarbon, BP Chemicals/Hitco, and Amoco, embarked on a program to improve the current materials. The program consisted of heat treatment studies and standard and low-density material improvements evaluation. Improvements evaluated included fiber/fabric heat treatments, weave variations, resin application methods, process controls, and monitors.

Engine environmental effects on composite behavior

NASA Technical Reports Server (NTRS)

Chamis, C. C.; Smith, G. T.

1980-01-01

A series of programs were conducted to investigate and develop the application of composite materials to turbojet engines. A significant part of that effort was directed to establishing the impact resistance and defect growth chracteristics of composite materials over the wide range of environmental conditions found in commercial turbojet engine operations. Both analytical and empirical efforts were involved. The experimental programs and the analytical methodology development as well as an evaluation program for the use of composite materials as fan exit guide vanes are summarized.

Evaluation of the Refugee Targeted Assistance Grants Program: Phase I, Final Report.

ERIC Educational Resources Information Center

Cichon, Donald; And Others

This report presents findings of the first phase of an evaluation of the Targeted Assistance Program (TAP), A Federal program which funds services and projects that assist refugees in attaining economic self-sufficiency and reduced dependency upon public assistance. Following an executive summary and other materials, the report is divided into…

Integrated Science in the Seychelles: An Evaluation.

ERIC Educational Resources Information Center

Brophy, Michael; Pillay, Patrick

1986-01-01

Provides an overview of the educational program of the Seychelles and focuses on an evaluation of the final phase (P7-P9) of the nine-year school program. Reports how findings from content analyses of materials, teacher and student interviews, and student test results were used to develop the new Seychelles Integrated Science program. (ML)

7 CFR 226.23 - Free and reduced-price meals.

Code of Federal Regulations, 2014 CFR

2014-01-01

... other descriptive material distributed to such persons, shall contain only the family-size income levels... to these levels are eligible for free or reduced price meals. Such forms and descriptive materials... evaluate, fund, or determine benefits for their programs; auditors for program reviews; and law enforcement...

Inorganic separator technology program

NASA Technical Reports Server (NTRS)

Smatko, J. S.; Weaver, R. D.; Kalhammer, F. R.

1973-01-01

Testing and failure analyses of silver zinc cells with largely inorganic separators were performed. The results showed that the wet stand and cycle life objective of the silver-zinc cell development program were essentially accomplished and led to recommendations for cell composition, design, and operation that should yield further improvement in wet and cycle life. A series of advanced inorganic materials was successfully developed and formulated into rigid and semiflexible separator samples. Suitable screening tests for evaluation of largely inorganic separators were selected and modified for application to the separator materials. The results showed that many of these formulations are potentially superior to previously used materials and permitted selection of three promising materials for further evaluation in silver-zinc cells.

Adaptive, Active and Multifunctional Composite and Hybrid Materials Program: Composite and Hybrid Materials ERA

DTIC Science & Technology

2014-04-01

Microvascular Self - Healing Composites Mechanical Evaluation ................................................................................11...Thermoplastic SMP Foam Microstructure- Mechanical Stress-Strain Relationships 2.2.2 Microvascular Self - Healing Composites Mechanical Evaluation 2.3.1 Z...materials, and embedded sensory and circulatory systems. Damage repair of torn or injured tissue was demonstrated by the use of self - healing polymer

Recruiting minorities into the profession of epidemiology. Surveying the applicants' mail. American College of Epidemiology Committee on Minority Affairs.

PubMed

Morssink, C B; Kumanyika, S; Tell, G S; Schoenbach, V J

1996-01-01

The underrepresentation in epidemiology of members of racial/ethnic minority groups is greater than in medicine and health fields in general. Using printed recruitment materials, we evaluated the impression that epidemiology programs might make on prospective minority students. Mainstream recruitment materials were solicited from all identifiable U.S. epidemiology programs (n = 70) by requesting copies of typical mailings to prospective students. Of 51 respondents, 46 sent materials that could be analyzed by tabulating and evaluating minority-related content in text and pictures. Materials reflected a generally low-key approach to epidemiology student recruitment. Most minority-related text referred to affirmative action or financial aid and was at the school level rather than specific to the epidemiology programs. Few minority-related epidemiology course titles or research interests were identified. We recommend including more information about epidemiology and its relevance to minority health in mainstream recruitment materials as one possible strategy for increasing the number of minority applicants.

Identification and feasibility test of specialized rural pedestrian safety training. Volume 3, PEDSAFE junior/senior high school materials

DOT National Transportation Integrated Search

1981-03-30

This report (Volume 3 of four volumes) provides detailed descriptions of all printed program materials employed in the Junior/Senior High School PEDSAFE Program. Volume 1 of this report describes the conduct and sults of the evaluation of the entire ...

Administration of Child Care Programs: Business Management. Instructor's Guide.

ERIC Educational Resources Information Center

Texas Tech Univ., Lubbock. Home Economics Curriculum Center.

Designed for use by postsecondary child development instructors, this guide is organized into four units that expose students to the general competencies and business management aspects of child care program administration. Introductory materials discuss the use of the materials and provide guidelines for evaluating students. The four units cover…

Independent Living Evaluation-Training Program. Reprint Series No. 16.

ERIC Educational Resources Information Center

Van Soest, Eileen; And Others

Intended to be used both as a guide for general program direction and as an individual evaluation and training tool this rehabilitation training guide includes materials and evaluation devices for use with mentally and/or physically handicapped clients on basic, intermediate and advanced living center levels. The eight independent living skill…

Creep-fatigue life prediction for engine hot section materials (isotropic)

NASA Technical Reports Server (NTRS)

Moreno, V.

1982-01-01

The objectives of this program are the investigation of fundamental approaches to high temperature crack initiation life prediction, identification of specific modeling strategies and the development of specific models for component relevant loading conditions. A survey of the hot section material/coating systems used throughout the gas turbine industry is included. Two material/coating systems will be identified for the program. The material/coating system designated as the base system shall be used throughout Tasks 1-12. The alternate material/coating system will be used only in Task 12 for further evaluation of the models developed on the base material. In Task II, candidate life prediction approaches will be screened based on a set of criteria that includes experience of the approaches within the literature, correlation with isothermal data generated on the base material, and judgements relative to the applicability of the approach for the complex cycles to be considered in the option program. The two most promising approaches will be identified. Task 3 further evaluates the best approach using additional base material fatigue testing including verification tests. Task 4 consists of technical, schedular, financial and all other reporting requirements in accordance with the Reports of Work clause.

The Model U.N. Program: Teaching Unreality. A United Nations Assessment Project Study. The Heritage Foundation Backgrounder No. 282.

ERIC Educational Resources Information Center

Gulick, Thomas G.; Merkle, Melanie L.

An evaluation of the instructional materials used by high school and college students who participated in the Model United Nations Program showed that the program is uncritical of the United Nations (U.N.) and biased against the United States and the West in general. These materials are strongly promoted by many prominent educational professional…

Recruiting for Caregiver Education Research

PubMed Central

Finlayson, Marcia; Henkel, Christin

2012-01-01

Caregiver education programs can support participants in a role that is often challenging. Research is needed to determine the effectiveness of these programs; however, recruitment for such studies can be difficult. The objectives of this study were to explore 1) how multiple sclerosis (MS) caregivers respond to recruitment materials for a research study evaluating a caregiver education program, including aspects of the materials that encourage or discourage their interest in participation; and 2) what recommendations MS caregivers have for improving study recruitment advertising. Qualitative interviews were conducted with seven MS caregivers. Participants were asked about their reactions to advertisements for a pilot study intended to evaluate an MS caregiver education program. Participants were also asked to reflect on factors that would influence their decision to participate in the program and to provide suggestions to improve recruitment materials. Data were analyzed using a constant-comparative approach. Study findings indicated that the language and visual design of the advertisements influenced the participants' initial responses. Some caregivers first responded to the fact that the program was part of a research study, and these caregivers had overall negative responses to the advertising, such as concern that the program was being “tested.” Other caregivers first considered the personal relevance of the program. These caregivers had neutral-to-positive responses to the flyers and weighed the relevance of the program against the research and logistical aspects. Participants provided recommendations to improve the recruitment materials. While recruiting for caregiver education research can be challenging, piloting recruitment materials and using a variety of advertising options may improve response. PMID:24453751

Development of the Joint Committee Standards for Evaluations of Educational Programs, Projects, and Materials.

ERIC Educational Resources Information Center

Diamond, Esther E.

The growing demand for program evaluation in the 1970s gave rise to a need for a comprehensive, carefully developed, objective set of guiding principles for the evaluation process, from initial planning to final report. The Joint Committee on Standards for Education Evaluation was established to meet this need. This broad-based group, representing…

LANDSAT activities in the Republic of Zaire

NASA Technical Reports Server (NTRS)

Ilunga, S.

1975-01-01

An overview of the LANDSAT data utilization program of the Republic of Zaire is presented. The program emphasizes topics of economic significance to the national development program of Zaire: (1) agricultural land use capability analysis, including evaluation of the effects of large-scale burnings; (2) mineral resources evaluation; and (3) production of mapping materials for poorly covered regions.

Design and evaluation of brushless electrical generators

NASA Technical Reports Server (NTRS)

Collins, F. A.; Ellis, J. N.

1970-01-01

Ten design manuals assembled and nine computer programs are developed for evaluation of proposed designs of brushless rotating electrical generators. Design manual package provides all information required for generator design, and computer programs permit calculation of performance of specific designs including effects of materials.

Development and evaluation of a pedestrian safety training program for elementary school bus riders

DOT National Transportation Integrated Search

1994-12-01

The objective of this study was to develop and evaluate a comprehensive pedestrian safety program for elementary (kindergarten through grade 6) school bus riders. Existing materials, crash data and state laws/regulations on school bus pedestrian safe...

77 FR 72435 - Pipeline Safety: Using Meaningful Metrics in Conducting Integrity Management Program Evaluations

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-05

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Evaluations AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Notice... improve performance. For gas transmission pipelines, Sec. Sec. 192.911(i) and 192.945 define the...

Developing effective health and safety training materials for workers in beryllium-using industries.

PubMed

Mayer, A S; Brazile, W J; Erb, S A; Barker, E A; Miller, C M; Mroz, M M; Maier, L A; Van Dyke, M V

2013-07-01

Despite reduced workplace exposures, beryllium sensitization and chronic beryllium disease still occur. Effective health and safety training is needed. Through an Occupational Safety and Health Administration (OSHA) Targeted Topic Training grant and company partners, we developed a training program. Evaluation and validation included knowledge and training reaction assessments and training impact survey. We describe herein the iterative, five-pronged approach: (1) needs assessment; (2) materials development; (3) pilot-testing, evaluation, and material revisions; (4) worker training; and (5) evaluation and validation. Mean posttraining test score increased 14% (82% to 96%; P < 0.005) and were unchanged at 90-day follow-up (94%; P = 0.744). In addition, 49% reported making changes in work practices. The use of a five-pronged training program was effective and well received and resulted in improved work practices. These materials are available on the OSHA Web site.

Evaluation of an Ink Print Reading Aid for the Blind: The Stereotoner. Final Report.

ERIC Educational Resources Information Center

Weisgerber, Robert A.; And Others

Evaluated with 30 trainees (age 12 - adult) was the Stereotoner (a chest-worn, ink print reading aid for the blind) in order to develop specialized instructional materials; coordinate a program of instruction; evaluate candidates, processes, and outcomes of training; and make available the basic course materials developed during the study. The…

Nondestructive evaluation of nuclear-grade graphite

NASA Astrophysics Data System (ADS)

Kunerth, D. C.; McJunkin, T. R.

2012-05-01

The material of choice for the core of the high-temperature gas-cooled reactors being developed by the U.S. Department of Energy's Next Generation Nuclear Plant Program is graphite. Graphite is a composite material whose properties are highly dependent on the base material and manufacturing methods. In addition to the material variations intrinsic to the manufacturing process, graphite will also undergo changes in material properties resulting from radiation damage and possible oxidation within the reactor. Idaho National Laboratory is presently evaluating the viability of conventional nondestructive evaluation techniques to characterize the material variations inherent to manufacturing and in-service degradation. Approaches of interest include x-ray radiography, eddy currents, and ultrasonics.

A self-instructional manual for installing low-cost/no-cost weatherization materials: Experimental validation with scouts

PubMed Central

Pavlovich, Mark; Greene, Brandon F.

1984-01-01

In this study, we describe the development and evaluation of a self-instructional program for installing 10 low-cost/no-cost weatherization materials (e.g., weatherstripping, caulking). This program was a weatherization and retrofit manual (WARM) providing step-by-step instructions and illustrations. Boy and Girl Scouts participated and used either the WARM or existing product instructions (EPI) to apply the materials. Scouts installed the materials properly only when they used the WARM. PMID:16795671

Electrical Arc Ignition Testing for Constellation Program

NASA Technical Reports Server (NTRS)

Sparks, Kyle; Gallus, Timothy; Smith, Sarah

2009-01-01

NASA Johnson Space Center (JSC) Materials and Processes Branch requested that NASA JSC White Sands Test Facility (WSTF) perform testing for the Constellation Program to evaluate the hazard of electrical arc ignition of materials that could be in close proximity to batteries. Specifically, WSTF was requested to perform wire-break electrical arc tests to determine the current threshold for ignition of generic cotton woven fabric samples with a fixed voltage of 3.7 V, a common voltage for hand-held electrical devices. The wire-break test was developed during a previous test program to evaluate the hazard of electrical arc ignition inside the Extravehicular Mobility Unit [1].

Automated predesign of aircraft

NASA Technical Reports Server (NTRS)

Poe, C. C., Jr.; Kruse, G. S.; Tanner, C. J.; Wilson, P. J.

1978-01-01

Program uses multistation structural-synthesis to size and design box-beam structures for transport aircraft. Program optimizes static strength and scales up to satisfy fatigue and fracture criteria. It has multimaterial capability and library of materials properties, including advanced composites. Program can be used to evaluate impact on weight of variables such as materials, types of construction, structural configurations, minimum gage limits, applied loads, fatigue lives, crack-growth lives, initial crack sizes, and residual strengths.

PROGRAM ASTEC (ADVANCED SOLAR TURBO ELECTRIC CONCEPT). PART III CANDIDATE MATERIALS ORBITAL EVALUATION.

DTIC Science & Technology

by the solar-collector industry for use in the ASTEC Program, and to test the degrading effects of various segregated and combined elements of the...elements which may be causative to material surface degradation can be determined. The ASTEC scientific space experiment was developed and qualified, and

Personal Consumerism. Courseware Evaluation for Vocational and Technical Education.

ERIC Educational Resources Information Center

Smizer, Janet; And Others

This courseware evaluation rates the "Personal Consumerism" program developed by Aquarius People Materials. (The eight-program series--not contained in this document--includes understanding labels, consumer help, consumer fraud, consumer law, comparative shopping, consumerism and you, reading an advertisement, and tips on buying a used…

Enabling propulsion materials for high-speed civil transport engines

NASA Technical Reports Server (NTRS)

Stephens, Joseph R.; Herbell, Thomas P.

1992-01-01

NASA Headquarters and LeRC have advocated an Enabling Propulsion Materials Program (EPM) to begin in FY-92. The High Speed Research Phase 1 program which began in FY-90 has focused on the environmental acceptability of a High Speed Civil Transport (HSCT). Studies by industry, including Boeing, McDonnell Douglas, GE Aircraft Engines, and Pratt & Whitney Aircraft, and in-house studies by NASA concluded that NO(x) emissions and airport noise reduction can only be economically achieved by revolutionary advancements in materials technologies. This is especially true of materials for the propulsion system where the combustor is the key to maintaining low emissions, and the exhaust nozzle is the key to reducing airport noise to an acceptable level. Both of these components will rely on high temperature composite materials that can withstand the conditions imposed by commercial aircraft operations. The proposed EPM program will operate in conjunction with the HSR Phase 1 Program and the planned HSR Phase 2 program slated to start in FY-93. Components and subcomponents developed from advanced materials will be evaluated in the HSR Phase 2 Program.

Evaluation of a Postdischarge Call System Using the Logic Model.

PubMed

Frye, Timothy C; Poe, Terri L; Wilson, Marisa L; Milligan, Gary

2018-02-01

This mixed-method study was conducted to evaluate a postdischarge call program for congestive heart failure patients at a major teaching hospital in the southeastern United States. The program was implemented based on the premise that it would improve patient outcomes and overall quality of life, but it had never been evaluated for effectiveness. The Logic Model was used to evaluate the input of key staff members to determine whether the outputs and results of the program matched the expectations of the organization. Interviews, online surveys, reviews of existing patient outcome data, and reviews of publicly available program marketing materials were used to ascertain current program output. After analyzing both qualitative and quantitative data from the evaluation, recommendations were made to the organization to improve the effectiveness of the program.

Evaluation of Teacher Training in a Title III Center.

ERIC Educational Resources Information Center

Reid, Ethna R.

This study is a report on a series of exemplary and instructional reading programs conducted by the Exemplary Center for Reading Instruction and designed to improve reading instruction in kindergarten through grade 12. The following topics are included: (1) evaluation of beginning reading programs, including materials selection, materials…

Energy Efficiency and Renewable Energy Program. Bibliography, 1993 edition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vaughan, K.H.

1993-06-01

The Bibliography contains listings of publicly available reports, journal articles, and published conference papers sponsored by the DOE Office of Energy Efficiency and Renewable Energy and published between 1987 and mid-1993. The topics of Bibliography include: analysis and evaluation; building equipment research; building thermal envelope systems and materials; district heating; residential and commercial conservation program; weatherization assistance program; existing buildings research program; ceramic technology project; alternative fuels and propulsion technology; microemulsion fuels; industrial chemical heat pumps; materials for advanced industrial heat exchangers; advanced industrial materials; tribology; energy-related inventions program; electric energy systems; superconducting technology program for electric energy systems; thermalmore » energy storage; biofuels feedstock development; biotechnology; continuous chromatography in multicomponent separations; sensors for electrolytic cells; hydropower environmental mitigation; environmental control technology; continuous fiber ceramic composite technology.« less

Status of the Ford program to evaluate ceramics for stator applications in automotive gas turbine engines

NASA Technical Reports Server (NTRS)

Trela, W.

1980-01-01

The paper reviews the progress of the major technical tasks of the DOE/NASA/Ford program Evaluation of Ceramics for Stator Applications in Automotive Gas Turbine Engines: reliability prediction, stator fabrication, material characterization, and stator evaluation. A fast fracture reliability model was prepared for a one-piece ceramic stator. Periodic inspection results are presented.

Evaluation of Modular EFL Educational Program (Audio-Visual Materials Translation & Translation of Deeds & Documents)

ERIC Educational Resources Information Center

Imani, Sahar Sadat Afshar

2013-01-01

Modular EFL Educational Program has managed to offer specialized language education in two specific fields: Audio-visual Materials Translation and Translation of Deeds and Documents. However, no explicit empirical studies can be traced on both internal and external validity measures as well as the extent of compatibility of both courses with the…

User-friendly program for multitask analysis

NASA Astrophysics Data System (ADS)

Caporali, Sergio A.; Akladios, Magdy; Becker, Paul E.

2000-10-01

Research on lifting activities has led to the design of several useful tools for evaluating tasks that involve lifting and material handling. The National Institute for Occupational Safety and Health (NIOSH) has developed a single task lifting equation. This formula has been frequently used as a guide in the field of ergonomics and material handling. While being much more complicated, the multi-task formula will provide a more realistic analysis for the evaluation of lifting and material handling jobs. A user friendly tool has been developed to assist professionals in the field of ergonomics in analyzing multitask types of material handling jobs. The program allows for up to 10 different tasks to be evaluated. The program requires a basic understanding of the NIOSH lifting guidelines and the six multipliers that are involved in the analysis of each single task. These multipliers are: Horizontal Distance Multiplier (HM), Vertical Distance Multiplier (VM), Vertical Displacement Multiplier (DM), Frequency of lifting Multiplier (FM), Coupling Multiplier (CM), and the Asymmetry Multiplier (AM). Once a given job is analyzed, a researched list of recommendations is provided to the user in an attempt to reduce the potential risk factors that are associated with each task.

Evaluation of the ion implantation process for production of solar cells from silicon sheet materials

NASA Technical Reports Server (NTRS)

Spitzer, M. B.

1983-01-01

The objective of this program is the investigation and evaluation of the capabilities of the ion implantation process for the production of photovoltaic cells from a variety of present-day, state-of-the-art, low-cost silicon sheet materials. Task 1 of the program concerns application of ion implantation and furnace annealing to fabrication of cells made from dendritic web silicon. Task 2 comprises the application of ion implantation and pulsed electron beam annealing (PEBA) to cells made from SEMIX, SILSO, heat-exchanger-method (HEM), edge-defined film-fed growth (EFG) and Czochralski (CZ) silicon. The goals of Task 1 comprise an investigation of implantation and anneal processes applied to dendritic web. A further goal is the evaluation of surface passivation and back surface reflector formation. In this way, processes yielding the very highest efficiency can be evaluated. Task 2 seeks to evaluate the use of PEBA for various sheet materials. A comparison of PEBA to thermal annealing will be made for a variety of ion implantation processes.

Evaluation of intrinsic and extrinsic motivation interventions with a self-help smoking cessation program.

PubMed

Curry, S J; Wagner, E H; Grothaus, L C

1991-04-01

Personalized feedback and a financial incentive, developed from an intrinsic/extrinsic motivation framework, were evaluated as adjuncts to self-help materials for smoking cessation. Ss (N = 1,217) were randomized to 4 treatment groups and were followed up at 3 and 12 months. Consistent with hypotheses derived from the motivation framework, the financial incentive increased the use of self-help materials, did not increase cessation rates among program users, and was associated with higher relapse rates among those who did manage to quit. The personalized feedback increased both smoking cessation and use of the materials 3 months after distribution of the materials. Continuous abstinence (abstinence at 3 and 12 months) in the group that received the personalized feedback alone was twice the rate of the other groups.

Comprehensive High School Bilingual Program. E.S.E.A. Title VII Final Evaluation Report, 1980-1981.

ERIC Educational Resources Information Center

Shore, Rima, Ed.; And Others

This report describes, provides demographic data for, and evaluates the effectiveness of the Comprehensive High School Bilingual Program (C.H.S.B.P.), which provided staff and material resources to five high school Spanish, Chinese, and Italian bilingual programs in New York City. In 1980-81, C.H.S.B.P. served 468 students of limited English…

Re-evaluation of Second Grade, Revised MANS Tests. Evaluation Report 7-B-4. Extended Pilot Trial of the Comprehensive School Mathematics Program.

ERIC Educational Resources Information Center

Herbert, Martin

The Comprehensive School Mathematics Program (CSMP) is a program of CEMREL, Inc., one of the national educational laboratories, and was funded by the National Institute of Education (NIE). Its primary purpose is the development of curriculum materials for kindergarten through grade 6. This study compared CSMP and non-CSMP second-grade students'…

Evaluation of Revised Third Grade, MANS Green Level. Evaluation Report 8-B-3. Extended Pilot Trial of the Comprehensive School Mathematics Program.

ERIC Educational Resources Information Center

Dougherty, Knowles

The Comprehensive School Mathematics Program (CSMP) is a program of CEMREL, Inc., one of the national educational laboratories, and was funded by the National Institute of Education (NIE). Its major purpose is the development of curriculum materials for kindergarten through grade 6. This study compared CSMP and non-CSMP students' performance at…

Sixth Grade Evaluation, Preliminary Study. Evaluation Report 8-B-1. Extended Pilot Trial of the Comprehensive School Mathematics Program.

ERIC Educational Resources Information Center

Marshall, Gail; Herbert, Martin

The Comprehensive School Mathematics Program (CSMP) is a program of CEMREL, Inc., one of the national educational laboratories, and was funded by the National Institute of Education (NIE). Its major purpose is the development of curriculum materials for kindergarten through grade 6. An Extended Pilot Test was scheduled for spring 1982 for several…

School/Work Transition. A Bibliography.

ERIC Educational Resources Information Center

Florida State Univ., Tallahassee. Center for Instructional Development and Services.

This annotated bibliography contains 55 citations of materials that contain information on transitional programs for the physically or mentally challenged or disadvantaged students. Citations include descriptive, evaluative, and research reports; guides; information analyses; opinion papers; and reference materials. Materials for inclusion in this…

Automatically producing tailored web materials for public administration

NASA Astrophysics Data System (ADS)

Colineau, Nathalie; Paris, Cécile; Vander Linden, Keith

2013-06-01

Public administration organizations commonly produce citizen-focused, informational materials describing public programs and the conditions under which citizens or citizen groups are eligible for these programs. The organizations write these materials for generic audiences because of the excessive human resource costs that would be required to produce personalized materials for everyone. Unfortunately, generic materials tend to be longer and harder to understand than materials tailored for particular citizens. Our work explores the feasibility and effectiveness of automatically producing tailored materials. We have developed an adaptive hypermedia application system that automatically produces tailored informational materials and have evaluated it in a series of studies. The studies demonstrate that: (1) subjects prefer tailored materials over generic materials, even if the tailoring requires answering a set of demographic questions first; (2) tailored materials are more effective at supporting subjects in their task of learning about public programs; and (3) the time required to specify the demographic information on which the tailoring is based does not significantly slow down the subjects in their information seeking task.

New Brunswick Laboratory: Progress report, October 1987--September 1988

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

NBL has been tasked by the DOE Office of Safeguards and Security, Defense Programs (OSS/DP) to assure the application of accurate and reliable measurement technology for the safeguarding of special nuclear materials. NBL is fulfilling its mission responsibilities by identifying and addressing the measurement and measurement-related needs of the nuclear material safeguards community. These responsibilities are being addressed by activities in the following program areas: (1) reference and calibration materials, (2) measurement development, (3) measurement services, (4) measurement evaluation, (5) safeguards assessment, and (6) site-specific assistance. Highlights of each of these programs areas are provided in this summary.

7 CFR 225.15 - Management responsibilities of sponsors.

Code of Federal Regulations, 2013 CFR

2013-01-01

.... (4) Information or notices required on application forms. Application forms or descriptive materials... nutrition programs to help them evaluate, fund, or determine benefits for their programs; auditors for...

7 CFR 225.15 - Management responsibilities of sponsors.

Code of Federal Regulations, 2012 CFR

2012-01-01

.... (4) Information or notices required on application forms. Application forms or descriptive materials... nutrition programs to help them evaluate, fund, or determine benefits for their programs; auditors for...

Evaluating the Implementation of an Olympic Education Program in Greece

NASA Astrophysics Data System (ADS)

Grammatikopoulos, Vasilios; Tsigilis, Nikolaos; Koustelios, Athanasios; Theodorakis, Yannis

2005-11-01

The aim of this study was to develop an instrument for evaluating how an education program has been implemented. Such evaluation can provide insight into the effectiveness of a program. Examined here was the Olympic Education Program used in Greek schools since 2000. In it, students learn the history of the Olympic games and the importance of exercise for health along with the principles and values of sports and volunteerism. The evaluation instrument underlying this study addressed the following six factors: `facilities', `administration', `educational material', `student-teacher relationships', `educational procedures', and `training'. Results indicate that the instrument, while adequate for assessing effectiveness, should be combined with advanced statistical methods.

Revolutionary opportunities for materials and structures study

NASA Technical Reports Server (NTRS)

Schweiger, F. A.

1987-01-01

The revolutionary opportunities for materials and structures study was performed to provide Government and Industry focus for advanced materials technology. Both subsonic and supersonic engine studies and aircraft fuel burn and DOC evaluation are examined. Year 2010 goal materials were used in the advanced engine studies. These goal materials and improved component aero yielded subsonic fuel burn and DOC improvements of 13.4 percent and 5 percent, respectively and supersonic fuel burn and DOC improvements of 21.5 percent and 18 percent, respectively. Conclusions are that the supersonic study engine yielded fuel burn and DOC improvements well beyond the program goals; therefore, it is appropriate that advanced material programs be considered.

Evaluating Disaster Education: The National Oceanic and Atmospheric Administration's TsunamiReady[TM] Community Program and Risk Awareness Education Efforts in New Hanover County, North Carolina

ERIC Educational Resources Information Center

Horan, Jennifer; Ritchie, Liesel Ashley; Meinhold, Stephen; Gill, Duane A.; Houghton, Bruce F.; Gregg, Chris E.; Matheson, Tom; Paton, Douglas; Johnston, David

2010-01-01

This chapter describes the evaluation of the TsunamiReady[TM]-based educational materials distributed in New Hanover County, North Carolina. The authors evaluate whether educational materials about tsunami risk increased the perception of hazard risk, information, knowledge, and preparedness behaviors. There are three main findings. First, local…

Evaluation of a Text Compression Algorithm Against Computer-Aided Instruction (CAI) Material.

ERIC Educational Resources Information Center

Knight, Joseph M., Jr.

This report describes the initial evaluation of a text compression algorithm against computer assisted instruction (CAI) material. A review of some concepts related to statistical text compression is followed by a detailed description of a practical text compression algorithm. A simulation of the algorithm was programed and used to obtain…

EVALUATION OF RECYCLED PLASTIC LUMBER FOR MARINE APPLICATIONS

EPA Science Inventory

This report presents an evaluation of the recycled plastic materials (RPM) produced by California Recycling Company (CRC). his evaluation is performed under the Municipal Waste Innovative Technology Evaluation (MITE) Program of the U.S. EPA, Risk Reduction Engineering Laboratory....

EVALUATION OF RECYCLED PLASTIC LUMBER FOR MARINE APPLICATIONS

EPA Science Inventory

This report presents an evaluation of the recycled plastic materials (RPM) produced by California Recycling Company (CRC). This evaluation is performed under the Municipal Waste Innovative Technology Evaluation (MITE) Program of the U.S. EPA, Risk Reduction Engineering Laboratory...

Materials property definition and generation for carbon-carbon and carbon phenolic materials

NASA Technical Reports Server (NTRS)

Canfield, A. R.; Mathis, J. R.; Starrett, H. S.; Koenig, J. R.

1987-01-01

A data base program to generate statistically significant material-property data for carbon-carbon and carbon phenolic materials to be used in designs of Space Shuttle is described. The program, which will provide data necessary for thermal and stress modeling of Shuttle nozzle and exit cone structures, includes evaluation of tension, compression, shear strength, shear modulus, thermal expansion, thermal conductivity, permeability, and emittance for both materials; the testing of carbon phenolic materials also includes CTE, off-gassing, pyrolysis, and RTG. Materials to be tested will be excised from Space Shuttle inlet, throat, and exit cone billets and modified involute carbon-carbon exit cones; coprocessed blocks, panels, and cylinders will also be tested.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, D L

The US Department of Energy (DOE) has been conducting, through several of its operating contractors, an evaluation and testing program to qualify Type A radioactive material packagings per US Department of Transportation (DOT) Specification 7A (DOT-7A) of the Code of Federal Regulations (CFR), Title 49, Part 178 (49 CFR 178). This document summarizes the evaluation and testing performed for all of the packagings successfully qualified in this program. This document supersedes DOE Evaluation Document for DOT-7A Type A Packaging (Edling 1987), originally issued in 1987 by Monsanto Research Corporation Mound Laboratory (MLM), Miamisburg, Ohio, for the Department of Energy, Securitymore » Evaluation Program (I)P-4. Mound Laboratory issued four revisions to the document between November 1988 and December 1989. In September 1989, the program was transferred to Westinghouse Hanford Company (Westinghouse Hanford) in Richland, Washington. One additional revision was issued in March 1990 by Westinghouse Hanford. This revision reflects the earlier material and incorporates a number of changes. Evaluation and testing activities on 1208 three DOT-7A Program Dockets resulted in the qualification of three new packaging configurations, which are incorporated herein and summarized. This document presents approximately 300 different packagings that have been determined to meet the requirements for a DOT-7A, type A packaging per 49 CFR 178.350.« less

Investigation of Test Methods, Material Properties and Processes for Solar Cell Encapsulants

NASA Technical Reports Server (NTRS)

Willis, P.; Baum, B.

1982-01-01

The evaluation of potentially useful low cost encapsulation materials is discussed. The goal is to identify, evaluate, test and recommend encapsulant materials and processes for the production of cost effective, long life solar cell modules. Technical investigations concerned the development of advanced cure chemistries for lamination type pottants; the continued evaluation of soil resistant surface treatment, and the results of an accelerated aging test program for the comparison of material stabilities. New compounds were evaluated for efficiency in curing both ethylene/vinyl acetate and ethylene/methyl acrylate pottants intended for vacuum bag lamination of solar cells. Two component aliphatic urethane casting syrups were evaluated for suitability as solar module pottants on the basis of optical, physical and fabrication characteristics.

Online Extensive Reading for Advanced Foreign Language Learners: An Evaluation Study

ERIC Educational Resources Information Center

Arnold, Nike

2009-01-01

The following article reports the findings of a qualitative evaluation of an online extensive reading program in German as a foreign language. Designed for advanced learners, it differs from traditional extensive reading programs in two important aspects: students read online instead of printed materials, and there was no teacher preselection to…

TRANSTRAIN: A program to compute strain transformations in composite materials

NASA Technical Reports Server (NTRS)

Ahmed, Rafiq

1990-01-01

Over the years, the solid rocket motor community has made increasing use of composite materials for thermal and structural applications. This is particularly true of solid rocket nozzles, which have used carbon phenolic and, increasingly, carbon-carbon materials to provide structural integrity and thermal protection at the high temperatures encountered during motor burn. To evaluate the degree of structural performance of nozzles and their materials and to verify analysis models, many subscale and full-scale tests are run. These provide engineers with valuable data needed to optimize design and to analyze nozzle hardware. Included among these data are strains, pressures, thrust, temperatures, and displacements. Recent nozzle test hardware has made increasing use of strain gauges embedded in the carbon composite material to measure internal strains. In order to evaluate strength, these data must be transformed into strains along the fiber directions. The fiber-direction stresses can then be calculated. A computer program written to help engineers correctly manipulate the strain data into a form that can be used to evaluate structural integrity of the nozzle is examined.

Shuttle filter study. Volume 2: Contaminant generation and sensitivity studies

NASA Technical Reports Server (NTRS)

1974-01-01

Contaminant generation studies were conducted at the component level using two different methods, radioactive tracer technique and gravimetric analysis test procedure. Both of these were reduced to practice during this program. In the first of these methods, radioactively tagged components typical of those used in spacecraft were studied to determine their contaminant generation characteristics under simulated operating conditions. Because the purpose of the work was: (1) to determine the types and quantities of contaminants generated; and (2) to evaluate improved monitoring and detection schemes, no attempt was made to evaluate or qualify specific components. The components used in this test program were therefore not flight hardware items. Some of them had been used in previous tests; some were obsolete; one was an experimental device. In addition to the component tests, various materials of interest to contaminant and filtration studies were irradiated and evaluated for use as autotracer materials. These included test dusts, plastics, valve seat materials, and bearing cage materials.

Where We Now Stand

ERIC Educational Resources Information Center

Lumsden, Keith G.

1969-01-01

Noting the acceleration of scientific evaluation, the author focuses his attention on where we now stand in the evaluation of two methods of instruction: programed learning materials and television. (Editor)

Procedures for Trade and Industrial Program Development.

ERIC Educational Resources Information Center

Campbell, Clifton P.

The instructional systems development (ISD) approach for the development and accomplishment of vocational training programs provides a methodology for gathering and analyzing job information, developing instructional materials in a variety of media, conducting instruction, and evaluating and improving the effectiveness of training programs. This…

Design of study without drugs--a Surinamese school-based drug-prevention program for adolescents.

PubMed

Ishaak, Fariel; de Vries, Nanne Karel; van der Wolf, Kees

2015-10-12

The aim of this study was to design the content and accompanying materials for a school-based program--Study without Drugs--for adolescents in junior secondary schools in Suriname based on the starting points and tasks of the fourth step of the Intervention Mapping protocol (which consists of six steps). A program based on this protocol should include a combination of theory, empirical evidence, and qualitative and quantitative research. Two surveys were conducted when designing the program. In Survey I, teachers and students were asked to complete a questionnaire to determine which school year they thought would be most appropriate for implementing a drug-prevention program for adolescents (we completed a similar survey as part of previous research). An attempt was made to identify suitable culturally sensitive elements to include in the program. In Survey II, the same teachers were asked to complete a questionnaire to determine the programs' scope, sequence, structure, and topics as well as the general didactic principles to serve as a basis for program design. After outlining the program plan, lessons, and materials, we conducted a formative pretest evaluation among teachers, students, and parents. That evaluation included measures related to the program's attractiveness, comprehensibility, and usefulness. The resulting lessons were presented to the teachers for assessment. The drug-prevention program we developed comprises 10 activities and lasts 2-2.5 months in an actual school setting. The activities take place during Dutch, biology, physical education, art, religion, and social studies lessons. We based the structure of the lessons in the program on McGuire's Persuasion Communication Model, which takes into account important didactic principles. Evaluations of the program materials and lesson plans by students, teachers, and parents were mostly positive. We believe that using the fourth step of the Intervention Mapping protocol to develop a drug-prevention intervention for adolescents has a produced promising, feasible program.

[Creation and Evaluation of Educational Programs for Additional Delayed Scan of FDG-PET/CT].

PubMed

Wada, Ryota; Kamiya, Takashi; Fujino, Kouichi; Ueda, Junpei; Isohashi, Kayako; Tatsumi, Mitsuaki; Hatazawa, Jun

Generally, FDG-PET/CT image is acquired at the 60th minute after tracer administration. Depending on the clinical case, additional delayed scans may be useful. However, it is difficult to judge whether additional delayed scan is useful or not. The purposes of this study were creation and evaluation of educational programs to help radiological technologists to decide the usefulness of additional delayed scan of FDG-PET/CT. Educational programs consisted of the instructional materials and the judgment test of clinical cases. The instructional materials provided the valuable findings for differentiation between uptake in the wall of the colon and colon content, distinction between uptake in the lymph node and urinary tract, and evaluation of malignancy. The judgment test of clinical cases consisted of 10 cases selected by a nuclear medicine physician (for 5 of that cases additional delayed scan was decided to be useful). Five experienced technologists and five inexperienced technologists scored the volubility of additional delayed scan pre- and post-training using the instructional materials (the full marks of score is 5). After the educational programs using the instructional materials, the score was improved with the significant difference in both experienced (pre: 3.6±1.4, post: 4.0±1.2) and inexperienced (pre: 2.8±1.5, post: 3.7±1.5) groups (p<0.05). According to the educational programs, technologist might be able to decide whether the additional delayed scan is useful or not. The successful results of this study may improve the interpretation or reduce the total exposure dose of the PET/CT scan.

Interlaboratory comparison program for nondestructive assay of prototype uranium reference materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trahey, N.M.; Smith, M.M.; Voeks, A.M.

The US Department of Energy (DOE), New Brunswick Laboratory (NBS), designed and administered an interlaboratory comparison program based on the measurement of NBL-produced prototype uranium nondestructive assay (NDA) reference materials for scrap and waste. The objectives of the program were to evaluate the reliability of NDA techniques as applied to nuclear safeguards materials control and accountability needs and to investigate the feasibility of providing practical NDA scrap and waste reference materials for use throughout the nuclear safeguards community. Fourteen facilities representing seven DOE contractors, four US Nuclear Regulatory Commission (NRC) licensees, one EURATOM Laboratory, and NBL, participated in this program.more » Three stable, well-characterized uranium reference materials were developed and certified for this program. Synthetic calcined ash, cellulose fiber, and ion-exchange resin simulate selected uranium scrap and waste forms which are often encountered in fabrication and recovery operations. The synthetic calcined ash represents an intermediate density inorganic matrix while the cellulose fiber and ion-exchange resin are representative of low-density organic matrices. The materials, containing from 0 to 13% uranium enriched at 93% /sup 235/U, were sealed in specially selected containers. Nineteen prototype reference samples, plus three empty containers, one to accompany each set, was circulated to the participants between August 1979 and May 1984. Triplicate measurements for /sup 235/U on each of the 19 filled containers were required. In addition, participants could opt to perform modular configuration measurements using containers from Sets IIA and IIB to simulate non-homogeneously dispersed uranium in waste containers. All data were reported to NBL for evaluation.« less

Textile technology development

NASA Technical Reports Server (NTRS)

Shah, Bharat M.

1995-01-01

The objectives of this report were to evaluate and select resin systems for Resin Transfer Molding (RTM) and Powder Towpreg Material, to develop and evaluate advanced textile processes by comparing 2-D and 3-D braiding for fuselage frame applications and develop window belt and side panel structural design concepts, to evaluate textile material properties, and to develop low cost manufacturing and tooling processes for the automated manufacturing of fuselage primary structures. This research was in support of the NASA and Langley Research Center (LaRc) Advanced Composite Structural Concepts and Materials Technologies for Primary Aircraft Structures program.

High-temperature gas-cooled reactor technology development program. Annual progress report for period ending December 31, 1982

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kasten, P.R.; Rittenhouse, P.L.; Bartine, D.E.

1983-06-01

During 1982 the High-Temperature Gas-Cooled Reactor (HTGR) Technology Program at Oak Ridge National Laboratory (ORNL) continued to develop experimental data required for the design and licensing of cogeneration HTGRs. The program involves fuels and materials development (including metals, graphite, ceramic, and concrete materials), HTGR chemistry studies, structural component development and testing, reactor physics and shielding studies, performance testing of the reactor core support structure, and HTGR application and evaluation studies.

Next-generation avionics packaging and cooling 'test results from a prototype system'

NASA Astrophysics Data System (ADS)

Seals, J. D.

The author reports on the design, material characteristics, and test results obtained under the US Air Force's advanced aircraft avionics packaging technologies (AAAPT) program, whose charter is to investigate new designs and technologies for reliable packaging, interconnection, and thermal management. Under this program, AT&T Bell Laboratories has completed the preliminary testing of and is evaluating a number of promising materials and technologies, including conformal encapsulation, liquid flow-through cooling, and a cyanate ester backplane. A fifty-two module system incorporating these and and other technologies has undergone preliminary cooling efficiency, shock, sine and random vibration, and maintenance testing. One of the primary objectives was to evaluate the interaction compatibility of new materials and designs with other components in the system.

Evaluation of Intrinsic and Extrinsic Motivation Interventions with a Self-Help Smoking Cessation Program.

ERIC Educational Resources Information Center

Curry, Susan J.; And Others

1991-01-01

Evaluated personalized feedback and financial incentives as adjuncts to self-help materials for smoking cessation among subjects (n=1,217) randomized to 4 treatment groups and followed up at 3 and 12 months. Financial incentive increased self-help material use, did not increase cessation rates, and was associated with higher relapse rates.…

BEST (Better Educational Skills Training). Final Report.

ERIC Educational Resources Information Center

Vermont Adult Learning, Rutland.

This document contains a final report, evaluation report, and materials from the Better Educational Skills Training (BEST) workplace literacy program in Vermont. The seven-page final report describes program components: (1) expanding and institutionalizing the workplace literacy program developed through two previous national workplace literacy…

Stress Corrosion Evaluation of Nitinol 60 for the International Space Station Water Recycling System

NASA Technical Reports Server (NTRS)

Torres, P. D.

2016-01-01

A stress corrosion cracking (SCC) evaluation of Nitinol 60 was performed because this alloy is considered a candidate bearing material for the Environmental Control and Life Support System (ECLSS), specifically in the Urine Processing Assembly of the International Space Station. An SCC evaluation that preceded this one during the 2013-2014 timeframe included various alloys: Inconel 625, Hastelloy C-276, titanium (Ti) commercially pure (CP), Ti 6Al-4V, extra-low interstitial (ELI) Ti 6Al-4V, and Cronidur 30. In that evaluation, most specimens were exposed for a year. The results of that evaluation were published in NASA/TM-2015-218206, entitled "Stress Corrosion Evaluation of Various Metallic Materials for the International Space Station Water Recycling System,"1 available at the NASA Scientific and Technical Information program web page: http://www.sti.nasa.gov. Nitinol 60 was added to the test program in 2014.

Test program to demonstrate the stability of hydrazine in propellant tanks

NASA Technical Reports Server (NTRS)

Moran, C. M.; Bjorklund, R. A.

1983-01-01

A 24-month coupon test program to evaluate the decomposition of propellant tanks is reported. The propellant fuel evaluated was monopropellant-grade hydrazine (N2H4), which is normally a colorless, fuming, corrosive, strongly reducing liquid. The degree of hydrazine decomposition was determined by means of chemical analyses of the liquid and evolved gases at the end of the test program. The experimental rates of hydrazine decomposition were determined to be within acceptable limits. The propellant tank materials and material combinations were not degraded by a 2-year exposure to hydrazine propellant. This was verified using change-of-weight determinations and microscopic examination of the specimen surface before and after exposure, and by posttest chemical analyses of hydrazine liquid for residual metal content.

The Minnesota Family, Friend and Neighbor Grant Program

ERIC Educational Resources Information Center

Susman-Stillman, Amy; Stout, Karen; Cleveland, Jennifer; Hawley, Vicki

2011-01-01

In 1997, Minnesota became the first state in the nation to pass legislation establishing an education and support program for family, friend, and neighbor (FFN) care providers. This article describes the Minnesota Family, Friend and Neighbor Grant Program and findings from an evaluation of the programs and a curriculum scan of materials used in…

An evaluation of health communication materials for individuals with disabilities developed by three state disability and health programs.

PubMed

Williams-Piehota, Pamela; Uhrig, Jennifer; Doto, Julia Kish; Anderson, Wayne; Williams, Peyton; Thierry, Joann M

2010-07-01

Health communication increasingly has been recognized as an important part of public health practice that can help raise awareness of potential health risks, influence attitudes and beliefs, and motivate individuals to change unhealthy behaviors. Yet, few health communication messages exist that target people with disabilities. An evaluation was conducted to assess the relevance and usefulness of health communication materials developed by or disseminated in, or both, three state disability and health programs. Health care providers and people with a variety of physical and sensory disabilities participated in the evaluation. Qualitative and quantitative data were collected in each of the three states using key informant interviews, focus groups, and a Web-based provider survey. State program staff reported that health communication strategies and messages should be developed to improve access and remove barriers to health care, provide access to facilities, empower consumers, and educate health care providers about the needs of people with disabilities. Several of these needs are consistent with the needs identified by consumers in the focus groups. Consumers indicated that improvements to the overall content and design of the state-developed health communication materials are needed, yet health care and human service providers who participated in the Web-based survey were generally satisfied with the materials. Nearly all providers reported being aware of the materials; however, consumers were not familiar with the state-developed materials reviewed by the focus groups. Improvements in the content and dissemination of health promotion materials designed by states are indicated. Implications for public health practice, including recommendations for improving future health communication materials, are addressed in this article. Copyright © 2010 Elsevier Inc. All rights reserved.

Creating a Learning-Friendly Curriculum.

ERIC Educational Resources Information Center

Donovan, Michael P.

1997-01-01

Argues against a type of program evaluation of undergraduate institutions that assumes students are products. Proposes that if students are products, then students are raw materials. Discusses the philosophical problems of considering students as raw materials. (DDR)

Follow-Up Study of Former Materials/Logistics Management Students at Harper College, 1990-1995. Volume XXIV, Number 14.

ERIC Educational Resources Information Center

Lucas, John A.; Magad, Eugene

In fall 1995, William Rainey Harper College in Illinois conducted a study of former students in the Materials/Logistics Management (MLM) program to determine their evaluation of their educational experiences in the program. The sample consisted of 298 former MLM students from 1990 to 1995, including 119 students who had earned 48 credit hours but…

High temperature arc-track resistant aerospace insulation

NASA Technical Reports Server (NTRS)

Dorogy, William

1994-01-01

The topics are presented in viewgraph form and include the following: high temperature aerospace insulation; Foster-Miller approach to develop a 300 C rated, arc-track resistant aerospace insulation; advantages and disadvantages of key structural features; summary goals and achievements of the phase 1 program; performance goals for selected materials; materials under evaluation; molecular structures of candidate polymers; candidate polymer properties; film properties; and a detailed program plan.

Highway concrete pavement technology development and testing : volume IV, field evaluation of Strategic Highway Research Program (SHRP) C-206 test sites (early opening of full-depth pavement repairs).

DOT National Transportation Integrated Search

2006-08-01

The objective of this study was to monitor and evaluate the performance of experimental full-depth repairs made with high-early-strength (HES) materials placed under Strategic Highway Research Program (SHRP) project C-206, Optimization of Highway Con...

Evaluation of the National Science Foundation's Partnerships for International Research and Education (PIRE) Program, Volume 2: Supplementary Materials. Final Report

ERIC Educational Resources Information Center

Martinez, Alina; Epstein, Carter; Parsad, Amanda

2015-01-01

The National Science Foundation contracted with Abt Associates to conduct an evaluation of its Partnerships for International Research and Education (PIRE) program, which supports intellectually substantive collaborations between U.S. and foreign researchers in which the international partnership is essential to the research effort. The evaluation…

An evaluation capacity building toolkit for principal investigators of undergraduate research experiences: A demonstration of transforming theory into practice.

PubMed

Rorrer, Audrey S

2016-04-01

This paper describes the approach and process undertaken to develop evaluation capacity among the leaders of a federally funded undergraduate research program. An evaluation toolkit was developed for Computer and Information Sciences and Engineering(1) Research Experiences for Undergraduates(2) (CISE REU) programs to address the ongoing need for evaluation capacity among principal investigators who manage program evaluation. The toolkit was the result of collaboration within the CISE REU community with the purpose being to provide targeted instructional resources and tools for quality program evaluation. Challenges were to balance the desire for standardized assessment with the responsibility to account for individual program contexts. Toolkit contents included instructional materials about evaluation practice, a standardized applicant management tool, and a modulated outcomes measure. Resulting benefits from toolkit deployment were having cost effective, sustainable evaluation tools, a community evaluation forum, and aggregate measurement of key program outcomes for the national program. Lessons learned included the imperative of understanding the evaluation context, engaging stakeholders, and building stakeholder trust. Results from project measures are presented along with a discussion of guidelines for facilitating evaluation capacity building that will serve a variety of contexts. Copyright © 2016. Published by Elsevier Ltd.

Methodology for Evaluating Raw Material Changes to RSRM Elastomeric Insulation Materials

NASA Technical Reports Server (NTRS)

Mildenhall, Scott D.; McCool, Alex (Technical Monitor)

2001-01-01

The Reusable Solid Rocket Motor (RSRM) uses asbestos and silicon dioxide filled acrylonitrile butadiene rubber (AS-NBR) as the primary internal insulation to protect the case from heat. During the course of the RSRM Program, several changes have been made to the raw materials and processing of the AS-NBR elastomeric insulation material. These changes have been primarily caused by raw materials becoming obsolete. In addition, some process changes have been implemented that were deemed necessary to improve the quality and consistency of the AS-NBR insulation material. Each change has been evaluated using unique test efforts customized to determine the potential impacts of the specific raw material or process change. Following the evaluations, the various raw material and process changes were successfully implemented with no detectable effect on the performance of the AS-NBR insulation. This paper will discuss some of the raw material and process changes evaluated, the methodology used in designing the unique test plans, and the general evaluation results. A summary of the change history of RSRM AS-NBR internal insulation is also presented.

United States of America Ocean Dumping Report for Calendar Year 1981. Dredged Material.

DTIC Science & Technology

1982-06-01

to monitoring studies under the Disposal Area Monitoring System ( DAHOS ) program. The program is designed to identify and evaluate impacts resulting...sites. The DAHOS program continually contributes to the development of new monitoring methodologies that reflect on the efficiency of field observations

"Come to Chimera!" 1978: A Librarian's Planning Handbook.

ERIC Educational Resources Information Center

Lukenbill, Shirley; Lesser, Anita

This handbook, prepared to assist librarians in planning summer reading programs for children, includes suggestions on the following: (1) establishing program goals, objectives, and activities; (2) supplies, resources, and materials needed for the program; (3) sample registration, evaluation, and volunteer recruitment forms; (4) types of publicity…

A Computer-aided Learning Exercise in Spectrophotometry.

ERIC Educational Resources Information Center

Pamula, Frederick

1994-01-01

Discusses the use of a computer simulation program in teaching the concepts of spectrophotometry. Introduces several parts of the program and program usage. Presents an assessment activity to evaluate students' mastery of material. Concludes with the advantages of this approach to the student and to the assessor. (ASK)

Service evaluation of aircraft composite structural components

NASA Technical Reports Server (NTRS)

Brooks, W. A., Jr.; Dow, M. B.

1973-01-01

The advantages of the use of composite materials in structural applications have been identified in numerous engineering studies. Technology development programs are underway to correct known deficiencies and to provide needed improvements. However, in the final analysis, flight service programs are necessary to develop broader acceptance of, and confidence in, any new class of materials such as composites. Such flight programs, initiated by NASA Langley Research Center, are reviewed. These programs which include the selectively reinforced metal and the all-composite concepts applied to both secondary and primary aircraft structural components, are described and current status is indicated.

NASA-UVa Light Aerospace Alloy and Structures Technology Program: Aluminum-Based Materials for High Speed Aircraft

NASA Technical Reports Server (NTRS)

Starke, E. A., Jr. (Editor)

1996-01-01

This report is concerned with 'Aluminum-Based Materials for High Speed Aircraft' which was initiated to identify the technology needs associated with advanced, low-cost aluminum base materials for use as primary structural materials. Using a reference baseline aircraft, these materials concept will be further developed and evaluated both technically and economically to determine the most attractive combinations of designs, materials, and manufacturing techniques for major structural sections of an HSCT. Once this has been accomplished, the baseline aircraft will be resized, if applicable, and performance objectives and economic evaluations made to determine aircraft operating costs. The two primary objectives of this study are: (1) to identify the most promising aluminum-based materials with respect to major structural use on the HSCT and to further develop those materials, and (2) to assess these materials through detailed trade and evaluation studies with respect to their structural efficiency on the HSCT.

Evaluation of materials for high performance solar arrays

NASA Technical Reports Server (NTRS)

Whitaker, A. F.; Smith, C. F., Jr.; Peacock, C. L., Jr.; Little, S. A.

1978-01-01

A program has been underway to evaluate materials for advanced solar arrays which are required to provide power to weight ratios up to 100 W/kg. Severe mission environments together with the lack of knowledge of space environmental materials degradation rates require the generation of irradiation and outgassing engineering data for use in the initial design phase of the flight solar arrays. Therefore, approximately 25 candidate array materials were subjected to selected mission environments of vacuum, UV, and particle irradiation, and their mechanical and/or optical properties were determined where appropriate.

A Guide to Educational Equity in Vocational Programs.

ERIC Educational Resources Information Center

Illinois State Office of Education, Springfield. Div. of Adult Vocational and Technical Education.

Designed for vocational teachers and administrators, this compilation of materials from various resources provides information, tips, and guidelines for evaluating instructional materials for sex bias and stereotypes, gives suggestions on using biased materials in a non-biased way, and presents guidelines for sex-equity in the classroom. Following…

Research on medium and high temperature solar heat storage materials

NASA Technical Reports Server (NTRS)

Heine, D.; Jucker, J.; Koch, D.; Krahling, H.; Supper, W.

1979-01-01

Characteristics of solar heat storage materials, preliminary tests in which melting and solidification characteristics are tested, and service life and cycling tests are reported. Various aspects of corrosion are discussed as well as decision about ultimate selection of materials. A program for storage and evaluation of data is included.

49 CFR 110.20 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS AND OIL TRANSPORTATION HAZARDOUS MATERIALS PUBLIC SECTOR... review means the review and evaluation of costs to determine reasonableness, allocability, and... the program contact with the project manager. The project officer is responsible for monitoring the...

49 CFR 110.20 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS AND OIL TRANSPORTATION HAZARDOUS MATERIALS PUBLIC SECTOR... review means the review and evaluation of costs to determine reasonableness, allocability, and... the program contact with the project manager. The project officer is responsible for monitoring the...

49 CFR 110.20 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS AND OIL TRANSPORTATION HAZARDOUS MATERIALS PUBLIC SECTOR... review means the review and evaluation of costs to determine reasonableness, allocability, and... the program contact with the project manager. The project officer is responsible for monitoring the...

Chemical vapor deposition growth

NASA Technical Reports Server (NTRS)

Ruth, R. P.; Manasevit, H. M.; Campbell, A. G.; Johnson, R. E.; Kenty, J. L.; Moudy, L. A.; Shaw, G. L.; Simpson, W. I.; Yang, J. J.

1978-01-01

The objective was to investigate and develop chemical vapor deposition (CVD) techniques for the growth of large areas of Si sheet on inexpensive substrate materials, with resulting sheet properties suitable for fabricating solar cells that would meet the technical goals of the Low Cost Silicon Solar Array Project. The program involved six main technical tasks: (1) modification and test of an existing vertical-chamber CVD reactor system; (2) identification and/or development of suitable inexpensive substrate materials; (3) experimental investigation of CVD process parameters using various candidate substrate materials; (4) preparation of Si sheet samples for various special studies, including solar cell fabrication; (5) evaluation of the properties of the Si sheet material produced by the CVD process; and (6) fabrication and evaluation of experimental solar cell structures, using impurity diffusion and other standard and near-standard processing techniques supplemented late in the program by the in situ CVD growth of n(+)/p/p(+) sheet structures subsequently processed into experimental cells.

Ultra high vacuum adhesion testing of NERVA engine materials

NASA Technical Reports Server (NTRS)

1970-01-01

The primary objective of this research program was to determine the effects of surface cleaning and deliberate gaseous contamination on the adhesion behavior of selected candidate materials for use in the NERVA nuclear rocket engine program. Using a torsion balance technique, the relationship between the normal compressive load applied to crossed rod samples and the resultant contact resistance was used to ascertain the extent of adhesion under each set of experimental conditions. In addition to an evaluation of the static adhesion behavior of selected materials combinations, the experimental apparatus was modified to permit a similar investigation relating to the effects of specific tangential displacements of the sample wires, i.e., their sliding friction behavior. During the course of this subcontract, the materials combinations 440 C vs. 440 C. pyrographite vs ZTA graphite, Nbc (graphite) vs. Nbc (graphite), and Electrolize Inconel 718 vs. Au electroplated 302 S/S were evaluated.

A study of the stress wave factor technique for evaluation of composite materials

NASA Technical Reports Server (NTRS)

Duke, J. C., Jr.; Henneke, E. G., II; Kiernan, M. T.; Grosskopf, P. P.

1989-01-01

The acousto-ultrasonic approach for nondestructive evaluation provides a measurement procedure for quantifying the integrated effect of globally distributed damage characteristic of fiber reinforced composite materials. The evaluation procedure provides a stress wave factor that correlates closely with several material performance parameters. The procedure was investigated for a variety of materials including advanced composites, hybrid structure bonds, adhesive bonds, wood products, and wire rope. The research program focused primarily on development of fundamental understanding and applications advancements of acousto-ultrasonics for materials characterization. This involves characterization of materials for which detection, location, and identification of imperfections cannot at present be analyzed satisfactorily with mechanical performance prediction models. In addition to presenting definitive studies on application potentials, the understanding of the acousto-ultrasonic method as applied to advanced composites is reviewed.

EVALUATION OF THE ADULT LEARNING CENTER OF ELIZABETHPORT BY STAFF AND PARTICIPANTS, OPERATIONS FROM 2/26/68 - 4/30/68.

ERIC Educational Resources Information Center

TATUM, WILLIAM; CHASNOFF, ROBERT

ACTIVITIES, FACILITIES, AND PROGRAMED READING MATERIALS AT THE ADULT LEARNING CENTER OF ELIZABETHPORT (ELIZABETH, NEW JERSEY) WERE EVALUATED IN 1968 BY STAFF MEMBERS AND PARTICIPANTS. STAFF OPINIONS DIFFERED AS TO THE MOST SUCCESSFUL MATERIALS, AND REASONS GIVEN FOR SUCCESS VARIED BETWEEN INTEREST LEVEL, SIZE OF PRINT AND LENGTH OF STORIES, THE…

Evaluation of Quantitative Literacy Series: Exploring Data and Exploring Probability. Program Report 87-5.

ERIC Educational Resources Information Center

Day, Roger P.; And Others

A quasi-experimental design with two experimental groups and one control group was used to evaluate the use of two books in the Quantitative Literacy Series, "Exploring Data" and "Exploring Probability." Group X teachers were those who had attended a workshop on the use of the materials and were using the materials during the…

Developing Competency-Based Activities and Evaluation Instruments for the Advertising Service Area of Distribution. Final Report. Leadership Development Series: Advertising Services.

ERIC Educational Resources Information Center

Pittsburgh Univ., PA. Div. of Teacher Development.

To provide materials for a national exchange program and a Pennsylvania activities bank, a project was designed to produce materials for teacher-coordinators of high school distributive education. The project objectives were to (1) review and evaluate competencies necessary for advertising service careers, (2) develop activities and evaluative…

Preliminary Evaluation of Commercial Off the Shelf (COTS) Packing Materials for Flight Medication Dispenser (FMD) Technology Development

NASA Technical Reports Server (NTRS)

Du, B.; Daniels, V.; Crady, C.; Putcha, L.

2011-01-01

This slide presentation reviews preliminary results of the program to evaluate Commercial Off the Shelf (COTS) packaging materials for pharmaceutical stability. The need for improved packaging is due to possible changes in chemical and/or physical properties of the drugs, which cause reported reduced potency and/or altered bioavailability and decreased efficacy.

NASA Collaborative Approach Mitigates Environmentally-Driven Obsolescence

NASA Technical Reports Server (NTRS)

Greene, Brian; Leeney, Bob; Richards, Joni

2016-01-01

National Aeronautics and Space Administration (NASA) missions, like Department of Defense (DoD) organizations, require the rigorous testing and qualification of critical materials. Obsolescence supply risks created by environmental requirements can affect the cost, schedule and performance of NASA missions and the resilience of critical infrastructure. The NASA Technology Evaluation for Environmental Risk Mitigation (TEERM) Principal Center helps to identify obsolescence supply risks driven by environmental requirements and works proactively with NASA Centers and Programs, the DoD, the European Space Agency (ESA) and other agencies and partners to identify and evaluate environmentally friendly alternatives. TEERM tracks environmental regulations, identifies the potential loss of material availability and works with NASA programs and Centers to evaluate potential impacts through a risk assessment approach. TEERM collaborative projects identify, demonstrate and evaluate commercially viable alternative technologies and materials. A major focus during the Space Shuttle Program was the need to replace ozone depleting substances that were used in spray foam and cleaning applications. The potential obsolescence of coatings containing hexavalent chromium and the risks associated with lead free solder were also of concern for the Space Shuttle and present ongoing risks to new programs such as the Space Launch System. One current project teams NASA and ESA in the evaluation and testing of individual coatings and coating systems as replacements for hexavalent chromium coatings in aerospace applications. The proactive, collaborative approach used by TEERM helps reduce the cost burden on any one team partner, reduces duplication of effort, and enhances the technical quality and overall applicability of the testing and analysis.

38 CFR 41.525 - Criteria for Federal program risk.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) AUDITS OF STATES, LOCAL GOVERNMENTS, AND NON-PROFIT ORGANIZATIONS Auditors § 41.525 Criteria for Federal program risk. (a) General. The auditor's determination should be based on an overall evaluation of the risk of noncompliance occurring, which could be material to the Federal program. The auditor shall...

Youth Studies Abstracts. Vol. 4 No. 3.

ERIC Educational Resources Information Center

Youth Studies Abstracts, 1985

1985-01-01

This volume contains 169 abstracts of documents dealing with youth and educational programs for youth. Included in the volume are 97 abstracts of documents dealing with social and educational developments; 56 abstracts of program reports, reviews, and evaluations; and 16 abstracts of program materials. Abstracts are grouped according to the…

Santa Fe Community College Staff Development Programs, Policies and Procedures.

ERIC Educational Resources Information Center

Santa Fe Community Coll., NM.

This collection of materials describes various aspects of Santa Fe Community College's (SFCC's) faculty and staff development program. Part 1 explains the philosophy that underpins staff development at SFCC; the planning, programming, information dissemination, and evaluation phases of staff development; and the use of professional development…

A Study of Informal Out-of-School Programs with Migrant Children.

ERIC Educational Resources Information Center

Dik, David

The purposes of this study were to determine the educational impact of an out-of-school informal migrant program, and to discover materials, techniques, methods, and guidelines for similar programs with migrant children. The Orange County, New York 4-H program was evaluated weekly and a record of successful projects, staff training procedures, and…

Reading Roundup: Rope a Good Book. Louisiana Summer Reading Program, 1995 Manual.

ERIC Educational Resources Information Center

White, Dorothy, J., Ed.

A manual for the Louisiana Summer Reading Program is presented in 14 sections with a western theme and illustrations. An evaluation form, a 1995 calendar, and a list of audiovisual materials with addresses and prices are also provided. Section 1 discusses promotion, publicity, and programs; and includes sample news releases; program ideas, and…

Flight service evaluation of an advanced composite empennage component on commercial transport aircraft. Phase 1: Engineering development

NASA Technical Reports Server (NTRS)

Ary, A.; Axtell, C.; Fogg, L.; Jackson, A.; James, A. M.; Mosesian, B.; Vanderwier, J.; Vanhamersveld, J.

1976-01-01

The empennage component selected for this program is the vertical fin box of the L-1011 aircraft. The box structure extends from the fuselage production joint to the tip rib and includes the front and rear spars. Various design options were evaluated to arrive at a configuration which would offer the highest potential for satisfying program objectives. The preferred configuration selected consists of a hat-stiffened cover with molded integrally stiffened spars, aluminum trussed composite ribs, and composite miniwich web ribs with integrally molded caps. Material screening tests were performed to select an advanced composite material system for the Advanced Composite Vertical Fin (ACFV) that would meet the program requirements from the standpoint of quality, reproducibility, and cost. Preliminary weight and cost analysis were made, targets established, and tracking plans developed. These include FAA certification, ancillary test program, quality control, and structural integrity control plans.

Evaluation of Advanced Composite Structures Technologies for Application to NASA's Vision for Space Exploration

NASA Technical Reports Server (NTRS)

Tenney, Darrel R.

2008-01-01

AS&M performed a broad assessment survey and study to establish the potential composite materials and structures applications and benefits to the Constellation Program Elements. Trade studies were performed on selected elements to determine the potential weight or performance payoff from use of composites. Weight predictions were made for liquid hydrogen and oxygen tanks, interstage cylindrical shell, lunar surface access module, ascent module liquid methane tank, and lunar surface manipulator. A key part of this study was the evaluation of 88 different composite technologies to establish their criticality to applications for the Constellation Program. The overall outcome of this study shows that composites are viable structural materials which offer from 20% to 40% weight savings for many of the structural components that make up the Major Elements of the Constellation Program. NASA investment in advancing composite technologies for space structural applications is an investment in America's Space Exploration Program.

[Distance education: use of the WebCT as a support tool for teaching intravenous therapy in nursing undergraduate programs].

PubMed

Dias, Denise Costa; Cassiani, Silvia Helena De Bortoli

2003-01-01

This investigation focused on a learning environment via internet, through which Intravenous Therapy (IVT) was taught. Due to its complexity, Intravenous Therapy was chosen against numerous subjects to be taught through an e-learning environment, by comprising both technical procedures and conceptual aspects that can be discussed through a virtual learning environment. The objectives of this study were to develop educational material about Intravenous Therapy to guide students through the learning related to intravenous therapy, to have the related educational material evaluated by experts, and to evaluate the students' use of this material, considering difficulties and/or advantages, participation/interaction in this environment, and usability of its tools. The interface used for the internet-based training program was WebCT.

46 CFR 30.30-9 - Evaluation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Evaluation. 30.30-9 Section 30.30-9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS GENERAL PROVISIONS Interim Procedures for Evaluating Vessel Personnel Licensing and Certification Programs of Foreign Countries § 30.30-9 Evaluation. Materials...

NDE Process Development Specification for SRB Composite Nose Cap

NASA Technical Reports Server (NTRS)

Suits, M.

1999-01-01

The Shuttle Upgrade program is a continuing improvement process to enable the Space Shuttle to be an effective space transportation vehicle for the next few decades. The Solid Rocket Booster (SRB), as a component of that system, is currently undergoing such an improvement. Advanced materials, such as composites, have given us a chance to improve performance and to reduce weight. The SRB Composite Nose Cap (CNC) program aims to replace the current aluminum nose cap, which is coated with a Thermal Protection System and poses a possible debris hazard, with a lighter, stronger, CNC. For the next 2 years, this program will evaluate the design, material selection, properties, and verification of the CNC. This particular process specification cites the methods and techniques for verifying the integrity of such a nose cap with nondestructive evaluation.

Chemical compatibility screening results of plastic packaging to mixed waste simulants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nigrey, P.J.; Dickens, T.G.

1995-12-01

We have developed a chemical compatibility program for evaluating transportation packaging components for transporting mixed waste forms. We have performed the first phase of this experimental program to determine the effects of simulant mixed wastes on packaging materials. This effort involved the screening of 10 plastic materials in four liquid mixed waste simulants. The testing protocol involved exposing the respective materials to {approximately}3 kGy of gamma radiation followed by 14 day exposures to the waste simulants of 60 C. The seal materials or rubbers were tested using VTR (vapor transport rate) measurements while the liner materials were tested using specificmore » gravity as a metric. For these tests, a screening criteria of {approximately}1 g/m{sup 2}/hr for VTR and a specific gravity change of 10% was used. It was concluded that while all seal materials passed exposure to the aqueous simulant mixed waste, EPDM and SBR had the lowest VTRs. In the chlorinated hydrocarbon simulant mixed waste, only VITON passed the screening tests. In both the simulant scintillation fluid mixed waste and the ketone mixture simulant mixed waste, none of the seal materials met the screening criteria. It is anticipated that those materials with the lowest VTRs will be evaluated in the comprehensive phase of the program. For specific gravity testing of liner materials the data showed that while all materials with the exception of polypropylene passed the screening criteria, Kel-F, HDPE, and XLPE were found to offer the greatest resistance to the combination of radiation and chemicals.« less

Improved piston ring materials for 650 deg C service

NASA Technical Reports Server (NTRS)

Bjorndahl, W. D.

1986-01-01

A program to develop piston ring material systems which will operate at 650C was performed. In this program, two candidate high temperature piston ring substrate materials, Carpenter 709-2 and 440B, were hot formed into the piston ring shape and subsequently evaluated. In a parallel development effort ceramic and metallic piston ring coating materials were applied to cast iron rings by various processing techniques and then subjected to thermal shock and wear evaluation. Finally, promising candidate coatings were applied to the most thermally stable hot formed substrate. The results of evaluation tests of the hot formed substrate show that Carpenter 709-2 has greater thermal stability than 440B. Of the candidate coatings, plasma transferred arc (PTA) applied tungsten carbide and molybdenum based systems exhibit the greatest resistance to thermal shock. For the ceramic based systems, thermal shock resistance was improved by bond coat grading. Wear testing was conducted to 650C (1202F). For ceramic systems, the alumina/titania/zirconia/yttria composition showed highest wear resistance. For the PTA applied systems, the tungsten carbide based system showed highest wear resistance.

Eye movements as a function of response contingencies measured by blackout technique1

PubMed Central

Doran, Judith; Holland, James G.

1971-01-01

A program may have a low error rate but, at the same time, require little of the student and teach him little. A measure to supplement error rate in evaluating a program has recently been developed. This measure, called the blackout ratio, is the percentage of material that may be deleted without increasing the error rate. In high blackout-ratio programs, obtaining a correct answer is contingent upon only a small portion of the item. The present study determined if such low response-contingent material is read less thoroughly than programmed material that is heavily response-contingent. Eye movements were compared for two versions of the same program that differed only in the choice of the omitted words. The alteration of the required responses resulted in a version with a higher blackout ratio than the original version, which had a low blackout ratio. Eighteen undergraduates received half their material from the high and half their material from the low blackout-ratio version. The order was counterbalanced. Location and duration of all eye fixations in each item were recorded by a Mackworth Eye Marker Camera. On high blackout-ratio material, subjects used fewer fixations, shorter fixation time, and shorter scanning time. High blackout-ratio material failed to evoke the students' attention. PMID:16795275

A Numerical Round Robin for the Reliability Prediction of Structural Ceramics

NASA Technical Reports Server (NTRS)

Powers, Lynn M.; Janosik, Lesley A.

1993-01-01

A round robin has been conducted on integrated fast fracture design programs for brittle materials. An informal working group (WELFEP-WEakest Link failure probability prediction by Finite Element Postprocessors) was formed to discuss and evaluate the implementation of the programs examined in the study. Results from the study have provided insight on the differences between the various programs examined. Conclusions from the study have shown that when brittle materials are used in design, analysis must understand how to apply the concepts presented herein to failure probability analysis.

Rural Energy Options Analysis Training Development and Implementation at NREL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilman, P.

2005-01-01

NREL has developed a rural energy options analysis training program for rural energy decision makers that provides knowledge, skills and tools for the evaluation of technologies, including renewables, for rural energy applications. Through the Department of Energy (DOE) Solar Energy Technologies Program (SETP), NREL has refined materials for the program and developed a module that offers hands-on training in the preparation of data for options analysis using HOMER, NREL's micropower optimization model. NREL has used the materials for training in Brazil, the Maldives, Mexico, and Sri Lanka.

Advanced research and technology program for advanced high pressure oxygen-hydrogen rocket propulsion

NASA Technical Reports Server (NTRS)

Marsik, S. J.; Morea, S. F.

1985-01-01

A research and technology program for advanced high pressure, oxygen-hydrogen rocket propulsion technology is presently being pursued by the National Aeronautics and Space Administration (NASA) to establish the basic discipline technologies, develop the analytical tools, and establish the data base necessary for an orderly evolution of the staged combustion reusable rocket engine. The need for the program is based on the premise that the USA will depend on the Shuttle and its derivative versions as its principal Earth-to-orbit transportation system for the next 20 to 30 yr. The program is focused in three principal areas of enhancement: (1) life extension, (2) performance, and (3) operations and diagnosis. Within the technological disciplines the efforts include: rotordynamics, structural dynamics, fluid and gas dynamics, materials fatigue/fracture/life, turbomachinery fluid mechanics, ignition/combustion processes, manufacturing/producibility/nondestructive evaluation methods and materials development/evaluation. An overview of the Advanced High Pressure Oxygen-Hydrogen Rocket Propulsion Technology Program Structure and Working Groups objectives are presented with highlights of several significant achievements.

Advanced research and technology programs for advanced high-pressure oxygen-hydrogen rocket propulsion

NASA Technical Reports Server (NTRS)

Marsik, S. J.; Morea, S. F.

1985-01-01

A research and technology program for advanced high pressure, oxygen-hydrogen rocket propulsion technology is presently being pursued by the National Aeronautics and Space Administration (NASA) to establish the basic discipline technologies, develop the analytical tools, and establish the data base necessary for an orderly evolution of the staged combustion reusable rocket engine. The need for the program is based on the premise that the USA will depend on the Shuttle and its derivative versions as its principal Earth-to-orbit transportation system for the next 20 to 30 yr. The program is focused in three principal areas of enhancement: (1) life extension, (2) performance, and (3) operations and diagnosis. Within the technological disciplines the efforts include: rotordynamics, structural dynamics, fluid and gas dynamics, materials fatigue/fracture/life, turbomachinery fluid mechanics, ignition/combustion processes, manufacturing/producibility/nondestructive evaluation methods and materials development/evaluation. An overview of the Advanced High Pressure Oxygen-Hydrogen Rocket Propulsion Technology Program Structure and Working Groups objectives are presented with highlights of several significant achievements.

Advanced research and technology programs for advanced high-pressure oxygen-hydrogen rocket propulsion

NASA Astrophysics Data System (ADS)

Marsik, S. J.; Morea, S. F.

1985-03-01

A research and technology program for advanced high pressure, oxygen-hydrogen rocket propulsion technology is presently being pursued by the National Aeronautics and Space Administration (NASA) to establish the basic discipline technologies, develop the analytical tools, and establish the data base necessary for an orderly evolution of the staged combustion reusable rocket engine. The need for the program is based on the premise that the USA will depend on the Shuttle and its derivative versions as its principal Earth-to-orbit transportation system for the next 20 to 30 yr. The program is focused in three principal areas of enhancement: (1) life extension, (2) performance, and (3) operations and diagnosis. Within the technological disciplines the efforts include: rotordynamics, structural dynamics, fluid and gas dynamics, materials fatigue/fracture/life, turbomachinery fluid mechanics, ignition/combustion processes, manufacturing/producibility/nondestructive evaluation methods and materials development/evaluation. An overview of the Advanced High Pressure Oxygen-Hydrogen Rocket Propulsion Technology Program Structure and Working Groups objectives are presented with highlights of several significant achievements.

Solar Concentrator Advanced Development Program, Task 1

NASA Technical Reports Server (NTRS)

1986-01-01

Solar dynamic power generation has been selected by NASA to provide power for the space station. Solar dynamic concentrator technology has been demonstrated for terrestrial applications but has not been developed for space applications. The object of the Solar Concentrator Advanced Development program is to develop the technology of solar concentrators which would be used on the space station. The first task of this program was to develop conceptual concentrator designs and perform trade-off studies and to develop a materials data base and perform material selection. Three unique concentrator concepts; Truss Hex, Spline Radial Panel and Domed Fresnel, were developed and evaluated against weighted trade criteria. The Truss Hex concept was recommended for the space station. Materials data base development demonstrated that several material systems are capable of withstanding extended periods of atomic oxygen exposure without undesirable performance degradation. Descriptions of the conceptual designs and materials test data are included.

Evaluating MC&A effectiveness to verify the presence of nuclear materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dawson, P. G.; Morzinski, J. A.; Ostenak, Carl A.

Traditional materials accounting is focused exclusively on the material balance area (MBA), and involves periodically closing a material balance based on accountability measurements conducted during a physical inventory. In contrast, the physical inventory for Los Alamos National Laboratory's near-real-time accounting system is established around processes and looks more like an item inventory. That is, the intent is not to measure material for accounting purposes, since materials have already been measured in the normal course of daily operations. A given unit process operates many times over the course of a material balance period. The product of a given unit process maymore » move for processing within another unit process in the same MBA or may be transferred out of the MBA. Since few materials are unmeasured the physical inventory for a near-real-time process area looks more like an item inventory. Thus, the intent of the physical inventory is to locate the materials on the books and verify information about the materials contained in the books. Closing a materials balance for such an area is a matter of summing all the individual mass balances for the batches processed by all unit processes in the MBA. Additionally, performance parameters are established to measure the program's effectiveness. Program effectiveness for verifying the presence of nuclear material is required to be equal to or greater than a prescribed performance level, process measurements must be within established precision and accuracy values, physical inventory results meet or exceed performance requirements, and inventory differences are less than a target/goal quantity. This approach exceeds DOE established accounting and physical inventory program requirements. Hence, LANL is committed to this approach and to seeking opportunities for further improvement through integrated technologies. This paper will provide a detailed description of this evaluation process.« less

The Implementation of Interactive Multimedia Learning Materials in Teaching Listening Skills

ERIC Educational Resources Information Center

Ampa, Andi Tenri

2015-01-01

One of the factors that may affect the success of the learning process is the use of learning media. Therefore, this research aimed to implement and evaluate the interactive multimedia learning materials using Wondershare Quizcreator program and audio materials in teaching "English listening skills". The research problem was whether or…

An investigation of the compressive strength of PRD-49-3/Epoxy composites

NASA Technical Reports Server (NTRS)

Kulkarni, S. V.; Rice, J. S.; Rosen, B. W.

1973-01-01

The development of unidirectional fiber composite materials is discussed. The mechanical and physical properties of the materials are described. Emphasis is placed in analyzing the compressive behavior of composite materials and developing methods for increasing compressive strength. The test program for evaluating the various procedures for improving compressive strength are reported.

Pupil Personnel Services: Material Review List Recommendations.

ERIC Educational Resources Information Center

Cardinale, Anthony

This list of materials provides recommendations to counselors and guidance personnel for the purchase of materials for pupil personnel services programs in the Department of Defense Dependents Schools (DDDS). The listing, based on staff reviews in each of the six DDDS regions, is divided into 10 content areas: (1) assessment and evaluation; (2)…

Evaluation of current incentive/disincentive procedures in construction.

DOT National Transportation Integrated Search

2004-10-01

This study was initiated to take an in-depth look at the current time and material incentive/disincentive program associated with highway construction projects in Kentucky. The current incentive/disincentive program was first initiated in the mid to ...

Program Evaluation - Automotive Lightweighting Materials Program Research and Development Projects Assessment of Benefits - Case Studies No. 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Das, S.

This report is the second of a series of studies to evaluate research and development (R&D) projects funded by the Automotive Lightweighting Materials (ALM) Program of the Office of Advanced Automotive Technologies (OAAT) of the U.S. Department of Energy (DOE). The objectives of the program evaluation are to assess short-run outputs and long-run outcomes that may be attributable to the ALM R&D projects. The ALM program focuses on the development and validation of advanced technologies that significantly reduce automotive vehicle body and chassis weight without compromising other attributes such as safety, performance, recyclability, and cost. Funded projects range from fundamentalmore » materials science research to applied research in production environments. Collaborators on these projects include national laboratories, universities, and private sector firms, such as leading automobile manufacturers and their suppliers. Three ALM R&D projects were chosen for this evaluation: Design and Product Optimization for Cast Light Metals, Durability of Lightweight Composite Structures, and Rapid Tooling for Functional Prototyping of Metal Mold Processes. These projects were chosen because they have already been completed. The first project resulted in development of a comprehensive cast light metal property database, an automotive application design guide, computerized predictive models, process monitoring sensors, and quality assurance methods. The second project, the durability of lightweight composite structures, produced durability-based design criteria documents, predictive models for creep deformation, and minimum test requirements and suggested test methods for establishing durability properties and characteristics of random glass-fiber composites for automotive structural composites. The durability project supported Focal Project II, a validation activity that demonstrates ALM program goals and reduces the lead time for bringing new technology into the marketplace. Focal projects concentrate on specific classes of materials and nonproprietary components and are done jointly by DOE and the Automotive Composites Consortium of U.S. Council for Automotive Research (USCAR). The third project developed a rapid tooling process that reduces tooling time, originally some 48-52 weeks, to less than 12 weeks by means of rapid generation of die-casting die inserts and development of generic holding blocks, suitable for use with large casting applications. This project was conducted by the United States Automotive Materials Partnership, another USCAR consortium.« less

Laboratory and field evaluations of non-bituminous hot melt pavement marker adhesive Georgia test deck : two year evaluation (fall 2006 product submissions).

DOT National Transportation Integrated Search

2008-10-01

Purpose: : The purpose of the National Transportation Product Evaluation Program (NTPEP) is to provide a cost-effective method of evaluation for materials of common interest among all participating NTPEP member departments. NTPEP reports allow member...

Microclimate Cooling Systems: A Shipboard Evaluation of Commercial Models

DTIC Science & Technology

1988-04-01

NCTRF), under contract to the Navy SciencI Assistance Program (NSAP), evaluated the feasibility of using commercial microclimate coolin9" systems (MCS...exterior of the air distribution vest be covered with a fire-retardant material similar to the type used in this evaluation. The results of this evaluation

Evaluation of “The Space Place,” a NASA Integrated, Multi-mission Education and Public Outreach Program

NASA Astrophysics Data System (ADS)

Fisher, Diane K.; Leon, N. J.

2006-12-01

The Space Place is an integrated NASA education and public outreach program, so far representing over 40 different NASA missions. It combines Web-based, printed, and externally published media to reach underserved audiences across the nation. Its primary mission is to develop and provide a highly desirable suite of attractive and educational products designed to appeal to and immerse the general public in space exploration. Its primary target audience is elementary school age kids. The program has developed an extensive network of partnerships with museums and libraries in rural areas, English and Spanish language newspapers, astronomy societies, rocketry clubs, and national youth organizations. Materials are distributed monthly through all these channels. Originally a New Millennium Program (NMP) outreach effort only, it is open to all NASA missions. NMP (a NASA-level program managed out of the Jet Propulsion Laboratory) continues to provide the base of support to build and maintain the outreach program’s infrastructure. Obtaining independent evaluation and reporting of the effectiveness of the program is one of NASA’s requirements for education and public outreach efforts. The Program Evaluation and Research Group (PERG) at Lesley University, Cambridge, MA, was retained to perform this service for The Space Place. PERG is also evaluating education and public outreach programs for NASA’s Science Mission Directorate. PERG recently delivered a report evaluating The Space Place program. Using both qualitative and quantitative methods, PERG surveyed representative samples of Space Place partner museums, astronomy clubs, and newspapers. The survey included questions about all the products the program provides. The report concludes that The Space Place fills a niche by serving small institutions, giving them a personal alliance with NASA that they would otherwise not have. By providing free, quality materials, The Space Place program provides these under-served populations access to space and science as only NASA can.

RESEARCH AND DEVELOPMENT ON ADVANCED GRAPHITE MATERIALS. Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1962-04-01

A review is given of activities over the period October 15, 1960 to October 15, 1961 on a three year program for the research and development of materials, experimental techniques, and equipment for development of premium quality, reproducible graphite-base materials suitable for missile and astronautic applications. Progress is reported on research and development in the study areas of raw materials, fabrication, and material characterization and evaluation. (auth)

Some Evaluative Comments Based on a Review of the Curriculum Development Processes Operating in the Stanford Program on International and Cross Cultural Education. [and] A Review of the Curriculum. Development Processes Operating in the Stanford Program on International and Cross-Cultural Education.

ERIC Educational Resources Information Center

Kennedy, Kerry J.

The processes of instructional materials development and dissemination used in four Stanford Program on International and Cross Cultural Education (SPICE) projects dealing with Latin America, Africa, China, and Japan are described, and evaluative comments based on a review of the curriculum development process are made. The major purpose of the…

APPLICATIONS ANALYSIS REPORT: SITE PROGRAM DEMONSTRATION TEST SOLIDITECH, INC. SOLIDIFICATION/ STABILIZATION PROCESS

EPA Science Inventory

This Applications Analysis Report evaluates the Soliditech, Inc., solidification/ stabilization process for the on-site treatment of waste materials. The Soliditech process mixes and chemically treats waste material with Urrichem (a proprietary reagent), additives, pozzolanic mat...

Evaluation of Title I Program, Community School Distrlct 31, New York City. 1978-79 School Year. Final Report, E.D.L. Reading Lab.

ERIC Educational Resources Information Center

Knight, Michael E.

This program was designed to improve reading skills and to provide intensive remediation for students in grades six through nine. Specialized materials and equipment were provided by Educational Development Laboratories (EDL). The EDL Reading Laboratory utilized the Learning 100 program, a multi-modality developmental and remedial program. Small…

Permanent and separable aerospace tubing/ fitting evaluation program, volume 1

NASA Technical Reports Server (NTRS)

Ursell, C. R.; Franz, C. R.

1975-01-01

The tube fitting evaluation program was conducted to develop a standard overall test program including methods, procedures, and equipment as well as recommended test sequences for qualifying fitting/tubing assemblies. The program consisted of testing the MS flareless (separable) fitting and utilizing the results as baseline data from which all other fittings will be evaluated. Five separable designs and five permanent designs were tested in three sizes with two types of tubing materials. The basic design requirements were 4,000 psi operating pressure within the temperature range of minus 65 F to plus 450 F while also being compatible with 21-6-9 and titanium 3Al-2.5V tubing alloys.

Quality of Subjective Experience in a Summer Science Program for Academically Talented Adolescents.

ERIC Educational Resources Information Center

Tuss, Paul

This study utilized the flow theory of intrinsic motivation to evaluate the subjective experience of 78 academically talented high school sophomores participating in an 8-day summer research apprenticeship program in materials and nuclear science. The program involved morning lectures on such topics as physics of electromagnetic radiation, energy…

Development and Evaluation of Educational Programs in Electromechanical Technology. Final Report.

ERIC Educational Resources Information Center

Roney, M. W.

The encompassing objective of this project was to assist two-year colleges in establishing electromechanical technican (EMT) training programs by developing the necessary planning and instructional materials and by providing direct program planning assistance. The research effort of the project was to develop and test an integrated systems of…

MEDICAL LABORATORY ASSISTANT, A SUGGESTED GUIDE FOR A TRAINING PROGRAM.

ERIC Educational Resources Information Center

Office of Education (DHEW), Washington, DC.

INFORMATION IS GIVEN TO ASSIST IN ORGANIZING AND ADMINISTERING A TRAINING PROGRAM FOR MEDICAL LABORATORY ASSISTANTS IN A VARIETY OF SETTINGS AND TO PROVIDE GUIDANCE IN ESTABLISHING NEW PROGRAMS AND IN EVALUATING EXISTING ONES. THE MATERIAL WAS PREPARED UNDER THE DIRECTION OF THE NATIONAL COMMITTEE FOR CAREERS IN MEDICAL TECHNOLOGY. PATHOLOGISTS…

Language Arts: Programming Suggestions for Hearing Impaired Students in Elementary Schools. Recommended Resources by the Alberta School for the Deaf.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton.

The monograph is designed to assist program planning teams in developing language arts programs for hearing-impaired students in regular classrooms. Topics discussed include promising instructional strategies, description and evaluation of materials, and effective assessment instruments. The first section on instructional strategies covers…

EVALUATING PROGRAMMED TEST INTERPRETATION USING EMOTIONAL AROUSAL AS A CRITERION.

ERIC Educational Resources Information Center

FORSTER, JERALD R.

THE QUESTION AS TO WHETHER OR NOT THE EMOTIONAL ASPECTS OF TEST INTERPRETATION MAKE IT INAPPROPRIATE FOR PROGRAMED METHODS WAS EXAMINED BY TWO METHODS OF TEST RESULT COMMUNICATION--PROGRAMED MATERIALS AND VERBAL COMMUNICATION BY A COUNSELOR. DEPENDENT VARIABLES WERE MEASURES OF EMOTIONAL AROUSAL RECORDED BY SKIN CONDUCTANCE UNITS AND THE GAIN IN…

Workplace ESL Literacy Program of the Los Angeles Herald Examiner Newspaper.

ERIC Educational Resources Information Center

Herald Examiner, Los Angeles, CA.

This packet of materials from the Los Angeles Herald Examiner's English-as-a-Second-Language (ESL) workplace literacy program, defunct since the newspaper's closing, contains the following items: an overview of the program; a list of units and subunits; two sample lesson plans; teacher guidelines about evaluation and progress; lists of specific…

North Carolina Primary Reading Program Evaluation. 1977. Final Report.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. of Research.

The Primary Reading Program was initiated in 117 classrooms in 40 North Carolina schools, to improve the reading achievement of the primary school students. The same number of control classrooms were also selected for comparison. Features of the program included increased funding for instructional materials; use of volunteers and teacher aides for…

JTEC/WTEC annual report and program summary: 1993/94

NASA Technical Reports Server (NTRS)

Holdridge, Geoffrey M. (Editor)

1994-01-01

The JTEC/WTEC (Japanese Technology Evaluation Center/World Technology Evaluation Center) Program at Loyola College is overviewed. A review of activities for 1993 and early 1994 is discussed along with plans for the following year. The bulk of the report consists of the summaries of completed projects in Information and Communication Technology; Materials; Manufacturing and Construction; Aeronautics, Space, and Ocean Technology; Energy; and Biotechnology.

Bibliography on the Design and Performance of Rail Track Structures

DOT National Transportation Integrated Search

1974-01-01

This bibliography was prepared as part of the Rail Supporting Technology Program being sponsored by the Rail Programs Branch of the Urban Mass Transportation Administration. It is based on the reference material that was used to evaluate the technica...

Overview of a pharmacist anticoagulation certificate program.

PubMed

Kirk, Julienne K; Edwards, Rebecca; Brewer, Andrew; Miller, Cathey; Bray, Bryan; Groce, James B

2017-07-01

To describe the design of an ongoing anticoagulation certificate program and annual renewal update for pharmacists. Components of the anticoagulation certificate program include home study, pre- and posttest, live sessions, case discussions with evaluation and presentation, an implementation plan, and survey information (program evaluation and use in practice). Clinical reasoning skills were assessed through case work-up and evaluation prior to live presentation. An annual renewal program requires pharmacists to complete home study and case evaluations. A total of 361 pharmacists completed the anticoagulation certificate program between 2002 and 2015. Most (62%) practiced in ambulatory care and 38% in inpatient care settings (8% in both). In the past four years, 71% were working in or starting anticoagulation clinics in ambulatory and inpatient settings. In their evaluations of the program, an average of 90% of participants agreed or strongly agreed the lecture material was relevant and objectives were met. Pharmacists are able to apply knowledge and skills in management of anticoagulation. This structured practice-based continuing education program was intended to enhance pharmacy practice and has achieved that goal. The certificate program in anticoagulation was relevant to pharmacists who attended the program. Copyright © 2017. Published by Elsevier Inc.

Internal dosimetry technical basis manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-12-20

The internal dosimetry program at the Savannah River Site (SRS) consists of radiation protection programs and activities used to detect and evaluate intakes of radioactive material by radiation workers. Examples of such programs are: air monitoring; surface contamination monitoring; personal contamination surveys; radiobioassay; and dose assessment. The objectives of the internal dosimetry program are to demonstrate that the workplace is under control and that workers are not being exposed to radioactive material, and to detect and assess inadvertent intakes in the workplace. The Savannah River Site Internal Dosimetry Technical Basis Manual (TBM) is intended to provide a technical and philosophicalmore » discussion of the radiobioassay and dose assessment aspects of the internal dosimetry program. Detailed information on air, surface, and personal contamination surveillance programs is not given in this manual except for how these programs interface with routine and special bioassay programs.« less

Evaluation of a national quality use of medicines service in Australia: an evolving model.

PubMed

Beilby, Justin; Wutzke, Sonia E; Bowman, Jenny; Mackson, Judith M; Weekes, Lynn M

2006-04-01

To describe the first phase of a global evaluation framework for the National Prescribing Service (NPS), with a focus on services for health professionals, and in particular highlight the lessons learnt from evaluation around the establishment and implementation of this national program. The agreed evaluation framework used mixed methods focused around a series of evaluation questions, aimed at measuring the overall effect of this new organization as well as the individual programs within it. The evaluation questions were determined a priori and were based on the objectives established by the organization in its first year of operation. A detailed analyses has been completed of: the process, scope and reach of program delivery using both quantitative and qualitative measures; changes in attitudes and knowledge measured through key informant interviews and surveys of professional groups and consumers; and changes in prescribing behaviour and savings to the Pharmaceutical Benefits Scheme (PBS) through analysis of prescription data. The evaluation period for this report was mid-1998 to mid-2004. The NPS has successfully implemented a complex, multi-faceted program across Australia. From 1998 to 2004, in addition to print material provided to all general practitioners (GPs) and pharmacists, 90% of all GPs have been actively involved in one or more educational activity; 116 of 120 divisions of general practice have coordinated local NPS programs; and 9% of pharmacists have actively participated in at least one educational activity. Sixty per cent of GPs and pharmacists rated the printed educational materials as good or very good. In the last three years, the NPS activities have generated savings in the range of $121-163 million to the PBS, owing to changes in prescribing practices. The national evaluation framework has informed program delivery and ongoing design and development. Continued refinement of existing evaluation methods and further exploration of new techniques will remain a priority for the organization.

Marshall Space Flight Center solid waste characterization and recycling improvement study

NASA Technical Reports Server (NTRS)

Eley, Michael H.; Crews, Lavonne; Johnston, Ben; Lee, David; Colebaugh, James

1995-01-01

The MSFC Facilities Office, which is responsible for disposing of all waste generated by MSFC, issued a delivery order to the University of Alabama in Huntsville (UAH) to characterize current MSFC waste streams and to evaluate their existing recycling program. The purpose of the study was to define the nature, quantity, and types of waste produced and to generate ideas for improving the present recycling program. Specifically, the following tasks were to be performed: Identify various surplus and waste materials--as identified by the Contracting Officer's Technical Representative (COTR)--by source, location, and type; Analyze MSFC's current methods for handling, storage, transport, and disposition of waste and surplussed materials; Determine the composition of various surplus and waste materials as to type and quantities from various sources and locations; Analyze different methods for the disposition of various surplus and waste materials, including quality, quantity, preparation, transport cost, and value; Study possible alternatives to current methods of handling, storage, transport, and disposition of surplus and waste materials to improve the quality and quantities recycled or sold and to reduce and minimize the quantities of surplus and waste material currently being disposed of or stored; Provide recommendations for source and centralized segregation and aggregation of materials for recycling and/or disposition; and The analysis could include identification and laboratory level evaluation of methods and/or equipment, including capital costs, operating costs, maintenance requirements, life cycle and return on investment for systems to support the waste reduction program mission.

Evaluation of Curricula Content Based on Thai Pharmacy Competency Standards

PubMed Central

Maitreemit, Pagamas; Pongcharoensuk, Petcharat; Armstrong, Edward P.

2008-01-01

Objective To evaluate the curricula content of Thai pharmacy schools based on the Thai pharmacy competency standards. Methods Course syllabi were collected from 11 pharmacy schools. A questionnaire was developed based on the Thai pharmacy competency standards. Course coordinators completed the questionnaire assessing the curricula content. Results The curricula for both the bachelor of science in pharmacy degree (BS Pharm) and doctor of pharmacy (PharmD) degree programs included the minimum content required by the 8 competency domains. The dominant content area in BS Pharm degree programs was product-oriented material. The content ratio of patient to product to social and administrative pharmacy in the BS Pharm degree programs was 2:3:1, respectively. However, the content ratio suggested by the Thai Pharmacy Council was 3:2:1, respectively. For the PharmD programs, the largest content area was patient-oriented material, which was in agreement with the framework suggested by the Thai Pharmacy Council. Conclusions The curricula of all Thai pharmacy schools met the competency standards; however, some patient-oriented material should be expanded and some product-oriented content deleted in order to meet the recommended content ratio. PMID:18322571

Breakway friction and dynamic friction/wear measurements of various ceramic materials from 25 C (75 F) to 650 C (1200 F)

NASA Technical Reports Server (NTRS)

Boes, D. J.

1984-01-01

This report describes the results of a program designed to evaluate the breakaway friction and dynamic friction/wear characteristics of materials having potential for use as load bearing components in a high-performance high-temperature heavy duty diesel engine. Ten candidate materials were selected, six of which were evaluated under all possible material combinations as both stationary as well as moving breakaway specimens. The remaining materials were evaluated either in the static mode against themselves and all other materials, or against themselves only. Experiments were performed at five temperatures up to 650 C (1200 F) and unit pressures of 700 kPa (100 lb/sq in.), 3500 kPa (500 lb/sq in.), and 7000 kPa (1000 lb/sq in.). Experimental results indicate that under dynamic conditions, four of the ten materials exhibited good to excellent friction/wear characteristics in various material combinations. These materials were: titanium carbide, silicon nitride, silicon carbide (reaction sintered), and Refel (SiC).

Printed health information materials: evaluation of readability and suitability.

PubMed

Shieh, Carol; Hosei, Barbara

2008-01-01

This study examined readability and suitability of printed health information materials colleted from multiple sources. In phase I, nursing students used Simple Measure of Gobbledygook (SMOG; McLaughlin, 1969) to assess the readability of 21 materials collected from the community. In phases II and III, nursing students and registered nurses used SMOG and the Suitability Assessment of Materials (SAM; Doak, Doak, & Root, 1996) to evaluate 15 prenatal materials from a Healthy Start program. SMOG assigns a reading grade level based on the number of words with 3 or more syllables. SAM has 22 items in 6 evaluation areas: content, literacy demand, graphics, layout and typography, learning stimulation and motivation, and cultural appropriateness. Major findings included that 53% to 86% of the printed materials had a reading level at or higher than 9th grade; materials lacked summary, interaction, and modeled behaviors, and registered nurses rated more materials as not suitable and fewer as superior for suitability qualities than students. Improving printed materials to have lower reading levels and better suitability qualities are indicated.

Evaluation of accountability measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cacic, C.G.

The New Brunswick Laboratory (NBL) is programmatically responsible to the U.S. Department of Energy (DOE) Office of Safeguards and Security (OSS) for providing independent review and evaluation of accountability measurement technology in DOE nuclear facilities. This function is addressed in part through the NBL Safegaurds Measurement Evaluation (SME) Program. The SME Program utilizes both on-site review of measurement methods along with material-specific measurement evaluation studies to provide information concerning the adequacy of subject accountability measurements. This paper reviews SME Program activities for the 1986-87 time period, with emphasis on noted improvements in measurement capabilities. Continued evolution of the SME Programmore » to respond to changing safeguards concerns is discussed.« less

PERT and CPM: Workshop Material.

ERIC Educational Resources Information Center

Burroughs Corp., Detroit, MI.

This is a workbook containing problems in PERT (program evaluation review technique). It is intended to be used in a workshop or classroom to train management personnel in the basic methodology and capability of PERT. This material is not adequate in depth to create an expert in these techniques, but it is felt that the material is adequate to…

Project: Informal Learning Program (ILP). Final Report for November 1, 1977 to May 31, 1978.

ERIC Educational Resources Information Center

Williams, David L., Jr.; And Others

This final report describes the development and field evaluation of teacher training materials (for inservice workshops) and elementary school language arts materials. The basic goal of the training materials, called Teacher Development Packages (TDPs), was to provide teachers with the information and skills needed to utilize games and informal…

Development and Evaluation of Science and Technology Education Program Using Interferometric SAR

NASA Astrophysics Data System (ADS)

Ito, Y.; Ikemitsu, H.; Nango, K.

2016-06-01

This paper proposes a science and technology education program to teach junior high school students to measure terrain changes by using interferometric synthetic aperture radar (SAR). The objectives of the proposed program are to evaluate and use information technology by performing SAR data processing in order to measure ground deformation, and to incorporate an understanding of Earth sciences by analyzing interferometric SAR processing results. To draft the teaching guidance plan for the developed education program, this study considers both science and technology education. The education program was used in a Japanese junior high school. An educational SAR processor developed by the authors and the customized Delft object-oriented radar interferometric software package were employed. Earthquakes as diastrophism events were chosen as practical teaching materials. The selected events indicate clear ground deformation in differential interferograms with high coherence levels. The learners were able to investigate the ground deformations and disasters caused by the events. They interactively used computers and became skilled at recognizing the knowledge and techniques of information technology, and then they evaluated the technology. Based on the results of pre- and post-questionnaire surveys and self-evaluation by the learners, it was clarified that the proposed program was applicable for junior high school education, and the learners recognized the usefulness of Earth observation technology by using interferometric SAR. The usefulness of the teaching materials in the learning activities was also shown through the practical teaching experience.

The MIRTE Experimental Program: An Opportunity to Test Structural Materials in Various Configurations in Thermal Energy Spectrum

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leclaire, Nicolas; Le Dauphin, Francois-Xavier; Duhamel, Isabelle

2014-11-04

The MIRTE (Materials in Interacting and Reflecting configurations, all Thicknesses) program was established to answer the needs of criticality safety practitioners in terms of experimental validation of structural materials and to possibly contribute to nuclear data improvement, which ultimately supports reactor safety analysis as well. MIRTE took the shape of a collaboration between the AREVA and ANDRA French industrialists and a noncommercial international funding partner such as the U.S. Department of Energy. The aim of this paper is to present the configurations of the MIRTE 1 and MIRTE 2 programs and to highlight the results of the titanium experiments recentlymore » published in the International Handbook of Evaluated Criticality Safety Benchmark Experiments.« less

Effects of simulant mixed waste on EPDM and butyl rubber

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nigrey, P.J.; Dickens, T.G.

1997-11-01

The authors have developed a Chemical Compatibility Testing Program for the evaluation of plastic packaging components which may be used in transporting mixed waste forms. In this program, they have screened 10 plastic materials in four liquid mixed waste simulants. These plastics were butadiene-acrylonitrile copolymer (Nitrile) rubber, cross-linked polyethylene, epichlorohydrin rubber, ethylene-propylene (EPDM) rubber, fluorocarbons (Viton and Kel-F{trademark}), polytetrafluoro-ethylene (Teflon), high-density polyethylene, isobutylene-isoprene copolymer (Butyl) rubber, polypropylene, and styrene-butadiene (SBR) rubber. The selected simulant mixed wastes were (1) an aqueous alkaline mixture of sodium nitrate and sodium nitrite; (2) a chlorinated hydrocarbon mixture; (3) a simulant liquid scintillation fluid; andmore » (4) a mixture of ketones. The screening testing protocol involved exposing the respective materials to approximately 3 kGy of gamma radiation followed by 14-day exposures to the waste simulants at 60 C. The rubber materials or elastomers were tested using Vapor Transport Rate measurements while the liner materials were tested using specific gravity as a metric. The authors have developed a chemical compatibility program for the evaluation of plastic packaging components which may be incorporated in packaging for transporting mixed waste forms. From the data analyses performed to date, they have identified the thermoplastic, polychlorotrifluoroethylene, as having the greatest chemical compatibility after having been exposed to gamma radiation followed by exposure to the Hanford Tank simulant mixed waste. The most striking observation from this study was the poor performance of polytetrafluoroethylene under these conditions. In the evaluation of the two elastomeric materials they have concluded that while both materials exhibit remarkable resistance to these environmental conditions, EPDM has a greater resistance to this corrosive simulant mixed waste.« less

A Model System for the Design and Maintenance of Related Instruction Curriculum for Approved U.S. Department of Labor Apprenticeship Programs; Phase III. Final Report and Final Evaluation Report.

ERIC Educational Resources Information Center

Lane Community Coll., Eugene, OR.

A final report and final evaluation report of Phase III are provided for a project to establish a national clearinghouse for apprenticeship-related instructional materials. The final report provides a summary and a narrative account of these project activities: identification of materials; identification of apprenticeship curriculum needs;…

Automated Analysis of Counselor Style and Effects: The Development and Evaluation of Methods and Materials to Assess the Stylistic Accuracy and Outcome Effectiveness of Counselor Verbal Behavior. Final Report.

ERIC Educational Resources Information Center

Pepyne, Edward W.

This project attempts to develop, evaluate and implement methods and materials for the automated analysis of the stylistic characteristics of counselor verbal behavior and its effects on client verbal behavior within the counseling interview. To achieve this purpose, the project designed a system of computer programs, the DISCOURSE ANALYSIS…

Evaluation of an online continuing education program from the perspective of new graduate nurses.

PubMed

Karaman, Selcuk; Kucuk, Sevda; Aydemir, Melike

2014-05-01

The aim of this study is to evaluate the online continuing education program from the perspectives of new graduate nurses. An evaluation framework includes five factors (program and course structure, course materials, technology, support services and assessment). In this study, descriptive research methods were used. Participants of the study included 2.365 registered nurses enrolled in the first online nursing bachelor completion degree program in the country. Data were collected by survey. The findings indicated that students were mostly satisfied with this program. The results of this study suggest that well designed asynchronous online education methods can be effective and appropriate for registered nurses. However, the provision of effective support and technological infrastructure is as vital as the quality of teaching for online learners. © 2013.

Evaluation of an updated version of the risk awareness and perception training program for young drivers.

DOT National Transportation Integrated Search

2017-03-01

Previous research suggests newly licensed teen drivers often fail to anticipate where unexpected hazards might materialize. One : training program designed to address these apparent deficiencies in knowledge and skills that has shown promise in previ...

Space Storable Rocket Technology program (SSRT). Option 1 program

NASA Astrophysics Data System (ADS)

Chazen, Melvin L.; Mueller, Thomas; Rust, Thomas

1993-08-01

The Space Storable Rocket Technology (SSRT) Option 1 Program was initiated in October 1991 after completion of the Basic Program. The program was restructured in mid-July 1992 to incorporate a Rhenium Technology Task and reduce the scope of the LO2-N2H4 engine development. The program was also extended to late February 1993 to allow for the Rhenium Technology Task completion. The Option 1 Program was devoted to evaluation of two new injector elements, evaluation of two different methods of thermal protection of the injector, evaluation of high temperature material properties of rhenium and evaluation of methods of joining the rhenium thrust chamber to the columbium injector and nozzle extension. In addition, critical experiments were conducted (Funded by Option 2) to evaluate mechanisms to understand the effects of GO2 injection into the chamber, helium injection into the main LO2, effect of the splash plate and effect of decreasing the aspect ratio of the 120-slot (-13a) element. The performance and thermal models were used to further correlate the test results with analyses. The results of the work accomplished are summarized.

Space Storable Rocket Technology program (SSRT). Option 1 program

NASA Technical Reports Server (NTRS)

Chazen, Melvin L.; Mueller, Thomas; Rust, Thomas

1993-01-01

The Space Storable Rocket Technology (SSRT) Option 1 Program was initiated in October 1991 after completion of the Basic Program. The program was restructured in mid-July 1992 to incorporate a Rhenium Technology Task and reduce the scope of the LO2-N2H4 engine development. The program was also extended to late February 1993 to allow for the Rhenium Technology Task completion. The Option 1 Program was devoted to evaluation of two new injector elements, evaluation of two different methods of thermal protection of the injector, evaluation of high temperature material properties of rhenium and evaluation of methods of joining the rhenium thrust chamber to the columbium injector and nozzle extension. In addition, critical experiments were conducted (Funded by Option 2) to evaluate mechanisms to understand the effects of GO2 injection into the chamber, helium injection into the main LO2, effect of the splash plate and effect of decreasing the aspect ratio of the 120-slot (-13a) element. The performance and thermal models were used to further correlate the test results with analyses. The results of the work accomplished are summarized.

PREFACE: International Conference on Advanced Structural and Functional Materials Design 2008

NASA Astrophysics Data System (ADS)

Kakeshita, Tomoyuki

2009-07-01

The Ministry of Education, Culture, Sports, Science and Technology of Japan started the Priority Assistance for the Formation of Worldwide Renowned Centers of Research - Global COE Program. This program is based on the competitive principle where a third party evaluation decides which program to support and to give priority support to the formation of world-class centers of research. Our program Center of Excellence for Advanced Structural and Functional Materials Design was selected as one of 13 programs in the field of Chemistry and Materials Science. This center is composed of two materials-related Departments in the Graduate School of Engineering: Materials and Manufacturing Science and Adaptive Machine Systems, and 4 Research Institutes: Center for Atomic and Molecular Technologies, Welding and Joining Research Institute, Institute of Scientific and Industrial Research and Research Center for Ultra-High Voltage Electron Microscopy. Recently, materials research, particularly that of metallic materials, has specialized only in individual elemental characteristics and narrow specialty fields, and there is a feeling that the original role of materials research has been forgotten. The 6 educational and research organizations which make up the COE program cooperatively try to develop new advanced structural and functional materials and achieve technological breakthrough for their fabrication processes from electronic, atomic, microstructural and morphological standpoints, focusing on their design and application: development of high performance structural materials such as space plane and turbine blades operating under a severe environment, new fabrication and assembling methods for electronic devices, development of evaluation technique for materials reliability, and development of new biomaterials for regeneration of biological hard tissues. The aim of this international conference was to report the scientific progress in our Global COE program and also to discuss related research topics. The organizing committee gratefully thanks participants for presenting their recent results and for discussions with our COE members and international attendees. November 2008 Professor Tomoyuki Kakeshita Chairman of the Conference Vice Dean, Graduate School of Engineering, Osaka University, Division of Materials and Manufacturing Science, Graduate School of Engineering Leader of Global COE Program, Osaka University, ''Center of Excellence for Advanced Structural and Functional Materials Design'' Organization Chairman: T Kakeshita (Osaka University) Advisory Board:H Mehrer (University Münster, Germany), E K H Salje (University of Cambridge, United Kingdom), H-E Schaefer (University of Stuttgart, Germany), P Veyssiere (CNRS-ONERA, France) Organizing Committee: T Kakeshita, H Araki, H Fujii, S Fujimoto, Y Fujiwara, A Hirose, S Kirihara, M Mochizuki, H Mori, T Nagase, H Nakajima, T Nakano, R Nakatani, K Nogi, Y Setsuhara, Y Shiratsuchi, T Tanaka, T Terai, H Tsuchiya, N Tsuji, H Utsunomiya, H Yasuda, H Yasuda (Osaka University) Executive Committee: T Kakeshita, S Fujimoto, Y Fujiwara, A Hirose, T Tanaka, H Yasuda (Osaka University) Conference Secretariat: Y Fujiwara (Osaka University) Proceedings Editors: T Kakeshita and Y Fujiwara (Osaka University) Conference photograph

The application of space program fire retardant technology to housing

NASA Technical Reports Server (NTRS)

Riccitiello, S. R.; Heising, K. W.

1973-01-01

A review of the NASA fire research and developed fire retardant materials is presented with the objective to analyze and evaluate the concepts and materials to determine the practical applicability to the housing industry. The report presents the NASA materials, their performance in a fire environment and areas where further evaluation is required. The review establishes where advancements in the state of the art have been achieved and points out reasons why these advancements can not be directly applied to the housing industry in the near future.

Determination of design allowable strength properties of elevated-temperature alloys. Part 1: Coated columbium alloys

NASA Technical Reports Server (NTRS)

Favor, R. J.; Maykuth, D. J.; Bartlett, E. S.; Mindlin, H.

1972-01-01

A program to determine the characteristics of two coated columbium alloy systems for spacecraft structures is discussed. The alloy was evaluated as coated base material, coated butt-welded material, and material thermal/pressure cycled prior to testing up to 30 cycles. Evaluation was by means of tensile tests covering the temperature range to 2400 F. Design allowables were computed and are presented as tables of data. The summary includes a room temperature property table, effect of temperature curves, and typical stress-strain curves.

Environmental effects on composites for aircraft

NASA Technical Reports Server (NTRS)

Pride, R. A.

1978-01-01

A number of ongoing, long-term environmental effects programs for composite materials are evaluated. The flight service experience was evaluated for 142 composite aircraft components after more than 5 years and 1 million successful component flight hours. Ground-based outdoor exposures of composite material coupons after 3 years of exposure at 5 sites have reached equilibrium levels of moisture pickup which are predictable. Solar ultraviolet-induced material loss is discussed for these same exposures. No significant degradation was observed in residual strength for either stressed or unstressed specimens, or for exposures to aviation fuels and fluids.

Breast cancer survivorship program: testing for cross-cultural relevance.

PubMed

Chung, Lynna K; Cimprich, Bernadine; Janz, Nancy K; Mills-Wisneski, Sharon M

2009-01-01

Taking CHARGE, a theory-based self-management program, was developed to assist women with survivorship concerns that arise after breast cancer treatment. Few such programs have been evaluated for cultural relevance with diverse groups. This study determined the utility and cultural relevance of the program for African American (AA) breast cancer survivors. Two focus groups were held with AA women (n = 13), aged 41 to 72 years, who had completed primary treatment. Focus group participants assessed the program content, format, materials, and the self-regulation process. Content analysis of audiotapes was conducted using an open, focused coding process to identify emergent themes regarding program relevance and topics requiring enhancement and/or further emphasis. Although findings indicated that the program's content was relevant to participants' experiences, AA women identified need for cultural enhancements in spirituality, self-preservation, and positive valuations of body image. Content areas requiring more emphasis included persistent fatigue, competing demands, disclosure, anticipatory guidance, and age-specific concerns about body image/sexuality. Suggested improvements to program materials included portable observation logs, additional resources, more photographs of younger AA women, vivid colors, and images depicting strength. These findings provide the basis for program enhancements to increase the utility and cultural relevance of Taking CHARGE for AA survivors and underscore the importance of evaluating interventions for racially/ethnically diverse groups.

Native Language Reading Approach Program, 1982-1983. O.E.E. Final Evaluation Report.

ERIC Educational Resources Information Center

Keyes, Jose Luis; And Others

The Native Language Reading Approach Program in New York City was designed as an exemplary approach to on-site training of classroom teachers and their assistants in how to help students transfer reading skills from their native language to English. Program components included support services, teacher training, material/curriculum development,…

Readers of the Round Table: The 1998 Joint Kentucky - Arizona Reading Program.

ERIC Educational Resources Information Center

Kentucky State Dept. for Libraries and Archives, Frankfort.

Intended to encourage children of all ages to read over the summer, this manual presents library-based programs, crafts, displays, and events with a medieval theme. The chapters of the manual are: (1) Introductory Materials; (2) Goals, Objectives and Evaluation; (3) Getting Started; (4) Common Program Structures; (5) Planning Timeline; (6)…

"Let's Count": Evaluation of a Pilot Early Mathematics Program in Low Socioeconomic Locations in Australia

ERIC Educational Resources Information Center

Perry, Bob; Gervasoni, Ann; Dockett, Sue

2012-01-01

The "Let's Count" pilot early mathematics program was implemented in five early childhood educational contexts across Australia during 2011. The program used specifically formulated materials and workshops to enlist the assistance of early childhood educators to work with parents and other family members of children in their settings to…

Building Enrollment Through Curriculum Change: The Implementation of a Comprehension-Based Program in Spanish.

ERIC Educational Resources Information Center

Long, Donna R.

1985-01-01

Describes the implementation of a first-year comprehension-based Spanish language program at New Mexico State University. Includes a discussion of the history of the program and of the problems encountered in changing a traditional curriculum. Also describes the materials, classroom practice, and testing and evaluation techniques used in the…

The Australian Science Facilities Program: A Study of Its Influence on Science Education in Australian Schools.

ERIC Educational Resources Information Center

Ainley, John G.

This report is a study conducted by the Australian Council for Educational Research to evaluate the influence of science material resources, provided under the Australian Science Facilities Program, on science education in Australia. Under the Australian Science Facilities Program some $123 million was spent, between July 1964 and June 1975, on…

Guidelines to Language Teaching in Classroom and Laboratory.

ERIC Educational Resources Information Center

Iodice, Don R.

Guidelines for evaluating, establishing, and administrating classroom and laboratory language programs are offered in this report. Attention is focused on the language laboratory, with sections on its use, scheduling, materials and texts, preparation of audio materials, preparation of tests, supervision, discipline, and maintenance. Briefer…

Development of field performance evaluation tools and program for pavement marking materials : technical report

DOT National Transportation Integrated Search

2011-03-01

Historically the prequalification or selection of pavement marking materials (PMMs) is mainly based on : product specifications and lab testing, which do not correlate well with the field performance of the products. : On the other hand, there is no ...

A full-scale fire program to evaluate new furnishings and textile materials developed by the National Aeronautics and Space Administration

NASA Technical Reports Server (NTRS)

Hillenbrand, L. J.; Wray, J. A.

1974-01-01

A program of experimental fires was carried out to establish the advantages offered by new materials for improved fire safety. Four full-scale bedrooms, differing only in the materials used to furnish them, were built and burned to provide comparative data on the fire hazards produced. Cost and availability differences were not considered. The visual evidence provided by TV and photographic coverage of the four experimental room fires showed clearly that the rooms responded very differently to a common ignition condition. Resistance to the ignition and spread of fire was substantially improved in the rooms furnished completely or partially with the new materials.

Evaluation of audiovisual teaching material in family practice: a report of review activities, 1977--1978.

PubMed

Geyman, J P

1979-05-01

Audiovisual teaching materials have found increasing use in medical education in recent years, and a large number of excellent materials have been produced. The plethora of existing audiovisual teaching programs has made it difficult for educators and potential users to be aware of what is available and to select programs relevant to specific learning needs. The Audiovisual Review Committee has functioned over the last five years as a subcommittee of the Education Committee of the Society of Teachers of Family Medicine. This paper describes the experience of this group over the last two years and presents a complete listing of audiovisual teaching materials which have been reviewed and appraised during that period.

Evaluation of powder metallurgy superalloy disk materials

NASA Technical Reports Server (NTRS)

Evans, D. J.

1975-01-01

A program was conducted to develop nickel-base superalloy disk material using prealloyed powder metallurgy techniques. The program included fabrication of test specimens and subscale turbine disks from four different prealloyed powders (NASA-TRW-VIA, AF2-1DA, Mar-M-432 and MERL 80). Based on evaluation of these specimens and disks, two alloys (AF2-1DA and Mar-M-432) were selected for scale-up evaluation. Using fabricating experience gained in the subscale turbine disk effort, test specimens and full scale turbine disks were formed from the selected alloys. These specimens and disks were then subjected to a rigorous test program to evaluate their physical properties and determine their suitability for use in advanced performance turbine engines. A major objective of the program was to develop processes which would yield alloy properties that would be repeatable in producing jet engine disks from the same powder metallurgy alloys. The feasibility of manufacturing full scale gas turbine engine disks by thermomechanical processing of pre-alloyed metal powders was demonstrated. AF2-1DA was shown to possess tensile and creep-rupture properties in excess of those of Astroloy, one of the highest temperature capability disk alloys now in production. It was determined that metallographic evaluation after post-HIP elevated temperature exposure should be used to verify the effectiveness of consolidation of hot isostatically pressed billets.

Advanced Small Rocket Chambers. Basic Program and Option 2: Fundamental Processes and Material Evaluation

NASA Technical Reports Server (NTRS)

Jassowski, Donald M.

1993-01-01

Propellants, chamber materials, and processes for fabrication of small high performance radiation cooled liquid rocket engines were evaluated to determine candidates for eventual demonstration in flight-type thrusters. Both storable and cryogenic propellant systems were considered. The storable propellant systems chosen for further study were nitrogen tetroxide oxidizer with either hydrazine or monomethylhydrazine as fuel. The cryogenic propellants chosen were oxygen with either hydrogen or methane as fuel. Chamber material candidates were chemical vapor deposition (CVD) rhenium protected from oxidation by CVD iridium for the chamber hot section, and film cooled wrought platinum-rhodium or regeneratively cooled stainless steel for the front end section exposed to partially reacted propellants. Laser diagnostics of the combustion products near the hot chamber surface and measurements at the surface layer were performed in a collaborative program at Sandia National Laboratories, Livermore, CA. The Material Sample Test Apparatus, a laboratory system to simulate the combustion environment in terms of gas and material temperature, composition, and pressure up to 6 Atm, was developed for these studies. Rocket engine simulator studies were conducted to evaluate the materials under simulated combustor flow conditions, in the diagnostic test chamber. These tests used the exhaust species measurement system, a device developed to monitor optically species composition and concentration in the chamber and exhaust by emission and absorption measurements.

Thermal Protection Materials Development

NASA Technical Reports Server (NTRS)

Selvaduray, Guna; Cox, Michael

1998-01-01

The main portion of this contract year was spent on the development of materials for high temperature applications. In particular, thermal protection materials were constantly tested and evaluated for thermal shock resistance, high-temperature dimensional stability, and tolerance to hostile environmental effects. The analytical laboratory at the Thermal Protection Materials Branch (TPMB), NASA-Ames played an integral part in the process of materials development of high temperature aerospace applications. The materials development focused mainly on the determination of physical and chemical characteristics of specimens from the various research programs.

Summer School for Retainees, 1982. Evaluation Design.

ERIC Educational Resources Information Center

Austin Independent School District, TX. Office of Research and Evaluation.

The evaluation design for the Austin Independent School District 1982 summer school program for elementary retainees is described. The evaluation is meant to focus on short-term skill mastery in reading and mathematics and the long-term achievement growth of the participants. Separate reading objectives and materials in Spanish and English…

Bench-Scale Evaluation Of Chemically Bonded Phosphate Ceramic Technology To Stabilize Mercury Waste Mixtures

EPA Science Inventory

This bench-scale study was conducted to evaluate the stabilization of mercury (Hg) and mercuric chloride-containing surrogate test materials by the chemically bonded phosphate ceramics technology. This study was performed as part of a U.S. EPA program to evaluate treatment and d...

The uncounted benefits: Federal efforts in domestic technology transfer

NASA Technical Reports Server (NTRS)

Chapman, R. L.; Hirst, K.

1986-01-01

Organized technology transfer activities conducted by the agencies of the U.S. government are described. The focus is upon agency or departmental level activity rather than the laboratory level. None of the programs on which information was collected has been assessed or evaluated individually. However, the aggregate programs of the government have been judged in terms of obvious gaps and opportunities for future improvement. An overview, descriptions of the various agency or department programs of technology transfer, a list of persons interviewed or consulted during the survey, and a bibliography of publications, reports and other material made available to the study staff are given. An extensive appendix of illustrative material collected from the various programs is also given.

ETV Program Report: Coatings for Wastewater Collection Systems - Epoxy Tec International, Inc., CPP RC3

EPA Science Inventory

The Epoxytec, Inc. CPP™ epoxy coating used for wastewater collection system rehabilitation was evaluated by EPA’s Environmental Technology Verification Program under laboratory conditions at the Center for Innovative Grouting Material and Technology (CIGMAT) Laboratory at the Uni...

IMPACT OF LEAD ACID BATTERIES AND CADMIUM STABILIZERS ON INCINERATOR EMISSIONS

EPA Science Inventory

The Waste Analysis Sampling, Testing and Evaluation (WASTE) Program is a multi-year, multi-disciplinary program designed to elicit the source and fate of environmentally significant trace materials as a solid waste progresses through management processes. s part of the WASTE Prog...

29 CFR Appendix A to Part 70 - Disclosure Officers

Code of Federal Regulations, 2010 CFR

2010-07-01

..., Directorate of Information Technology, OSHA 9. Director, Directorate of Enforcement Programs, OSHA 10..., MSHA 17. Director of Program Evaluation and Information Resources, MSHA Office of Administrative Law... the Secretary of Labor PRODUCTION OR DISCLOSURE OF INFORMATION OR MATERIALS Pt. 70, App. A Appendix A...

Demand generation activities and modern contraceptive use in urban areas of four countries: a longitudinal evaluation

PubMed Central

Speizer, Ilene S; Corroon, Meghan; Calhoun, Lisa; Lance, Peter; Montana, Livia; Nanda, Priya; Guilkey, David

2014-01-01

ABSTRACT Family planning is crucial for preventing unintended pregnancies and for improving maternal and child health and well-being. In urban areas where there are large inequities in family planning use, particularly among the urban poor, programs are needed to increase access to and use of contraception among those most in need. This paper presents the midterm evaluation findings of the Urban Reproductive Health Initiative (Urban RH Initiative) programs, funded by the Bill & Melinda Gates Foundation, that are being implemented in 4 countries: India (Uttar Pradesh), Kenya, Nigeria, and Senegal. Between 2010 and 2013, the Measurement, Learning & Evaluation (MLE) project collected baseline and 2-year longitudinal follow-up data from women in target study cities to examine the role of demand generation activities undertaken as part of the Urban RH Initiative programs. Evaluation results demonstrate that, in each country where it was measured, outreach by community health or family planning workers as well as local radio programs were significantly associated with increased use of modern contraceptive methods. In addition, in India and Nigeria, television programs had a significant effect on modern contraceptive use, and in Kenya and Nigeria, the program slogans and materials that were blanketed across the cities (eg, leaflets/brochures distributed at health clinics and the program logo placed on all forms of materials, from market umbrellas to health facility signs and television programs) were also significantly associated with modern method use. Our results show that targeted, multilevel demand generation activities can make an important contribution to increasing modern contraceptive use in urban areas and could impact Millennium Development Goals for improved maternal and child health and access to reproductive health for all. PMID:25611476

Readability, content, and quality of online patient education materials on preeclampsia.

PubMed

Lange, Elizabeth M S; Shah, Anuj M; Braithwaite, Brian A; You, Whitney B; Wong, Cynthia A; Grobman, William A; Toledo, Paloma

2015-01-01

The objective of this study was to evaluate the readability, content, and quality of patient education materials addressing preeclampsia. Websites of U.S. obstetrics and gynecology residency programs were searched for patient education materials. Readability, content, and quality were assessed. A one-sample t-test was used to evaluate mean readability level compared with the recommended 6th grade reading level. Mean readability levels were higher using all indices (p < 0.001). Content was variable with good website understandability, but poor actionability. The mean readability was above the recommended 6th grade reading level. The content, readability, and actionability of preeclampsia patient education materials should be improved.

Overview of NRC Proactive Management of Materials Degradation (PMMD) Program

NASA Astrophysics Data System (ADS)

Carpenter, C. E. Gene; Hull, Amy; Oberson, Greg

Materials degradation phenomena, if not appropriately managed, have the potential to adversely impact the design functionality and safety margins of nuclear power plant (NPP) systems, structures and components (SSCs). Therefore, the U.S. Nuclear Regulatory Commission (NRC) has initiated an over-the-horizon multi-year research Proactive Management of Materials Degradation (PMMD) Research Program, which is presently evaluating longer time frames (i.e., 80 or more years) and including passive long-lived SSCs beyond the primary piping and core internals, such as concrete containment and cable insulation. This will allow the NRC to (1) identify significant knowledge gaps and new forms of degradation; (2) capture current knowledge base; and, (3) prioritize materials degradation research needs and directions for future efforts. This effort is being accomplished in collaboration with the U.S. Department of Energy's (DOE) LWR Sustainability (LWRS) program. This presentation will discuss the activities to date, including results, and the path forward.

Management of the aging of critical safety-related concrete structures in light-water reactor plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naus, D.J.; Oland, C.B.; Arndt, E.G.

1990-01-01

The Structural Aging Program has the overall objective of providing the USNRC with an improved basis for evaluating nuclear power plant safety-related structures for continued service. The program consists of a management task and three technical tasks: materials property data base, structural component assessment/repair technology, and quantitative methodology for continued-service determinations. Objectives, accomplishments, and planned activities under each of these tasks are presented. Major program accomplishments include development of a materials property data base for structural materials as well as an aging assessment methodology for concrete structures in nuclear power plants. Furthermore, a review and assessment of inservice inspection techniquesmore » for concrete materials and structures has been complete, and work on development of a methodology which can be used for performing current as well as reliability-based future condition assessment of concrete structures is well under way. 43 refs., 3 tabs.« less

Development, implementation and evaluation of a peer review of teaching (PRoT) initiative in nursing education.

PubMed

Mager, Diana R; Kazer, Meredith W; Conelius, Jaclyn; Shea, Joyce; Lippman, Doris T; Torosyan, Roben; Nantz, Kathryn

2014-06-03

For many years, an area of research in higher education has been emerging around the development and implementation of fair and effective peer evaluation programs. Recently, a new body of knowledge has developed regarding the development and implementation of fair and effective peer evaluation programs resulting in formative and summative evaluations. The purpose of this article is to describe the development, implementation, and evaluation of a peer review of teaching (PRoT) program for nursing faculty, initiated at one small comprehensive university in the northeastern United States. Pairs of nursing faculty evaluated each other's teaching, syllabi, and course materials after collaborating in a pre-evaluation conference to discuss goals of the classroom visit. Qualitative data gathered in post project focus groups revealed that faculty found their modified PRoT process to be a mutually beneficial experience that was more useful, flexible and collegial, and less stressful than their previous evaluation process.

Audiovisual Materials.

ERIC Educational Resources Information Center

American Council on Education, Washington, DC. HEATH/Closer Look Resource Center.

The fact sheet presents a suggested evaluation framework for use in previewing audiovisual materials, a list of selected resources, and an annotated list of films which were shown at the AHSSPPE '83 Media Fair as part of the national conference of the Association on Handicapped Student Service Programs in Postsecondary Education. Evaluation…

Failure Analysis at the Kennedy Space Center

NASA Technical Reports Server (NTRS)

Salazar, Victoria L.; Wright, M. Clara

2010-01-01

History has shown that failures occur in every engineering endeavor, and what we learn from those failures contributes to the knowledge base to safely complete future missions. The necessity of failure analysis is at its apex at the end of one aged program and at the beginning of a new and untested program. The information that we gain through failure analysis corrects the deficiencies in the current vehicle to make the next generation of vehicles more efficient and safe. The Failure Analysis and Materials Evaluation Branch in the Materials Science Division at the Kennedy Space Center performs metallurgical, mechanical, electrical, and non-metallic materials failure analyses and accident investigations on both flight hardware and ground support equipment for the Space Shuttle, International Space Station, Constellation, and Launch Services Programs. This paper will explore a variety of failure case studies at the Kennedy Space Center and the lessons learned that can be applied in future programs.

Styrene-terminated polysulfone oligomers as matrix material for graphite reinforced composites: An initial study

NASA Technical Reports Server (NTRS)

Garcia, Dana; Bowles, Kenneth J.; Vannucci, Raymond D.

1987-01-01

Styrene terminated polysulfone oligomers are part of an oligomeric class of compounds with end groups capable of thermal polymerization. These materials can be used as matrices for graphite reinforced composites. The initial evaluation of styrene terminated polysulfone oligomer based composites are summarized in terms of fabrication methods, and mechanical and environmental properties. In addition, a description and evaluation is provided of the NASA/Industry Fellowship Program for Technology Transfer.

Agreement for NASA/OAST - USAF/AFSC space interdependency on spacecraft environment interaction

NASA Technical Reports Server (NTRS)

Pike, C. P.; Stevens, N. J.

1980-01-01

A joint AF/NASA comprehensive program on spacecraft environment interactions consists of combined contractual and in house efforts aimed at understanding spacecraft environment ineraction phenomena and relating ground test results to space conditions. Activities include: (1) a concerted effort to identify project related environmental interactions; (2) a materials investigation to measure the basic properties of materials and develop or modify materials as needed; and (3) a ground simulation investigation to evaluate basic plasma interaction phenomena and provide inputs to the analytical modeling investigation. Systems performance is evaluated by both ground tests and analysis. There is an environmental impact investigation to determine the effect of future large spacecraft on the charged particle environment. Space flight investigations are planned to verify the results. The products of this program are test standards and design guidelines which summarize the technology, specify test criteria, and provide techniques to minimize or eliminate system interactions with the charged particle environment.

Flexible thermal protection materials for entry systems

NASA Astrophysics Data System (ADS)

Kourtides, Demetrius A.

1993-02-01

Current programs addressed in aeroassist flight experiment are: (1) evaluation of thermal performance of advanced rigid and flexible insulations and reflective coating; (2) investigation of lighter than baseline materials; (3) investigation of rigid insulations which perform well; (4) study of flexible insulations which require ceramic coating; and (5) study of reflective coating effective at greater than 15 percent. In National Aerospace Plane (NASP), the programs addressed are: (1) high and low temperature insulations; and (2) attachment/standoff methodology critical which affects thermal performance.

Flexible thermal protection materials for entry systems

NASA Technical Reports Server (NTRS)

Kourtides, Demetrius A.

1993-01-01

Current programs addressed in aeroassist flight experiment are: (1) evaluation of thermal performance of advanced rigid and flexible insulations and reflective coating; (2) investigation of lighter than baseline materials; (3) investigation of rigid insulations which perform well; (4) study of flexible insulations which require ceramic coating; and (5) study of reflective coating effective at greater than 15 percent. In National Aerospace Plane (NASP), the programs addressed are: (1) high and low temperature insulations; and (2) attachment/standoff methodology critical which affects thermal performance.

Fusion materials: Technical evaluation of the technology of vandium alloys for use as blanket structural materials in fusion power systems

NASA Astrophysics Data System (ADS)

1993-08-01

The Committee's evaluation of vanadium alloys as a structural material for fusion reactors was constrained by limited data and time. The design of the International Thermonuclear Experimental Reactor is still in the concept stage, so meaningful design requirements were not available. The data on the effect of environment and irradiation on vanadium alloys were sparse, and interpolation of these data were made to select the V-5Cr-5Ti alloy. With an aggressive, fully funded program it is possible to qualify a vanadium alloy as the principal structural material for the ITER blanket in the available 5 to 8-year window. However, the data base for V-5Cr-5Ti is limited and will require an extensive development and test program. Because of the chemical reactivity of vanadium the alloy will be less tolerant of system failures, accidents, and off-normal events than most other candidate blanket structural materials and will require more careful handling during fabrication of hardware. Because of the cost of the material more stringent requirements on processes, and minimal historical working experience, it will cost an order of magnitude to qualify a vanadium alloy for ITER blanket structures than other candidate materials. The use of vanadium is difficult and uncertain; therefore, other options should be explored more thoroughly before a final selection of vanadium is confirmed. The Committee views the risk as being too high to rely solely on vanadium alloys. In viewing the state and nature of the design of the ITER blanket as presented to the Committee, it is obvious that there is a need to move toward integrating fabrication, welding, and materials engineers into the ITER design team. If the vanadium alloy option is to be pursued, a large program needs to be started immediately. The commitment of funding and other resources needs to be firm and consistent with a realistic program plan.

Evaluation of the Benefits Attributable to Automotive Lighweight Materials Program Research and Development Projects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Das, S.

The purpose of this project is to identify and test methods appropriate for estimating the benefits attributable to research and development (R and D) projects funded by the Automotive Lightweight Materials (ALM) Program of the Office of Advanced Automotive Technologies (OAAT) of the U.S. Department of Energy (DOE). The program focuses on the development and validation of advanced lightweight materials technologies to significantly reduce automotive vehicle body and chassis weight without compromising other attributes such as safety, performance, recyclability, and cost. The work supports the goals of the Partnership for a New Generation of Vehicles (PNGV). Up to thirty percentmore » of the improvement required to meet the PNGV goal of tripling vehicle fuel economy and much of its cost, safety, and recyclability goal depend on the lightweight materials. Funded projects range from basic materials science research to applied research in production environments. Collaborators on these projects include national laboratories, universities, and private sector firms, such as leading automobile manufacturers and their suppliers.« less

Development and implementation of a quality assurance program for a hormonal contraceptive implant.

PubMed

Owen, Derek H; Jenkins, David; Cancel, Aida; Carter, Eli; Dorflinger, Laneta; Spieler, Jeff; Steiner, Markus J

2013-04-01

The importance of the distribution of safe, effective and cost-effective pharmaceutical products in resource-constrained countries is the subject of increasing attention. FHI 360 has developed a program aimed at evaluating the quality of a contraceptive implant manufactured in China, while the product is being registered in an increasing number of countries and distributed by international procurement agencies. The program consists of (1) independent product testing; (2) ongoing evaluation of the manufacturing facility through audits and inspections; and (3) post-marketing surveillance. This article focuses on the laboratory testing of the product. The various test methods were chosen from the following test method compendia, the United States Pharmacopeia (USP), British Pharmacopeia (BP), International Organization for Standardization (ISO), the American Society for Testing and Materials (ASTM), or lot release tests mandated by Chinese regulatory requirements. Each manufactured lot is independently tested prior to its distribution to countries supported by this program. In addition, a more detailed annual testing program includes evaluation of the active ingredient (levonorgestrel), the final product and the packaging material. Over the first 4 years of this 5-year project, all tested lots met the established quality criteria. The quality assurance program developed for this contraceptive implant has helped ensure that a safe product was being introduced into developing country family planning programs. This program provides a template for establishing quality assurance programs for other cost-effective pharmaceutical products that have not yet received stringent regulatory approval and are being distributed in resource-poor settings. Copyright © 2013 Elsevier Inc. All rights reserved.

Biomedical application in space, pilot program in the southern California region

NASA Technical Reports Server (NTRS)

Kelton, A. A.

1979-01-01

A pilot program is presented which was to promote utilization of the Shuttle/Spacelab for medical and biological research applied to terrestrial needs. The program was limited to the Southern California region and consisted of the following five tasks: (1) preparation of educational materials; (2) identification of principal investigators; (3) initial contact and visit; (4)development of promising applications; and (5) evaluation of regional program methodology.

A Comparison of an Audio-Lingual Program and an Audio-Lingual-Visual Program for Beginning French Instruction in Grade Eight.

ERIC Educational Resources Information Center

Di Francesco, Loretta; Smith, Philip D., Jr.

1971-01-01

This evaluation of two programs of materials used in introductory French classes tests two basic hypotheses: (1) pretests are good predictors of subsequent French achievement at the junior high school level, and (2) students in different programs will achieve to the same degree on a final French test. Results of the groups using the "audiolingual"…

Astronomy sortie missions definition study. Volume 2, book 1: Astronomy sortie program technical report

NASA Technical Reports Server (NTRS)

1972-01-01

The work performed to arrive at a baseline astronomy sortie mission concept is summarized. The material includes: (1) definition of the telescopes and arrays; (2) preliminary definition of mission and systems; (3) identification, definition, and evaluation of alternative sortie programs; (4) the recommended astronomy sortie program; and (5) the astronomy sortie program concept that was approved as a baseline for the remainder of the project.

"Participation, satisfaction, perceived benefits, and maintenance of behavioral self-management strategies in a self-directed exercise program for adults with arthritis".

PubMed

Sharpe, Patricia A; Wilcox, Sara; Schoffman, Danielle E; Baruth, Meghan

2017-02-01

A process evaluation was conducted in conjunction with a controlled trial of a self-directed exercise program among people with arthritis to describe the program's reach; self-management behaviors, exposure to materials, program perceptions, satisfaction, and perceived benefits; compatibility with targeted participants' needs; and maintenance. Participants (n=197) were predominantly white, middle-aged, college-educated women. At 12 weeks, 73.2% had read ≥90% of the program materials (at nine months>70% had "occasionally" or "often" looked back over each of the five parts of the materials); 63.3% had set goals (52.5% at nine months), and 83.9% had "some" or "a lot" of success following their plan (64.2% at nine months), while 90.4% rated the program "good" or "excellent" (87.5% at nine months). At 12 weeks, the majority (89.3%) used written logs to self-monitor (mean=9.3 logs); by nine months, >70% never kept logs. Most (>80%) rated twelve of thirteen program components as helpful, and 98.6% would recommend the program. From 38% to 62.4% endorsed each of eight program benefits, with small declines of ≤9% at nine months. Qualitative response identified ways the program met and did not meet expectations. The main program compatibility issue was targeting all adults with arthritis, while featuring older adults in materials. Copyright © 2016 Elsevier Ltd. All rights reserved.

KSC lubricant testing program. [lubrication characteristics and corrosion resistance

NASA Technical Reports Server (NTRS)

Lockhart, B. J.; Bryan, C. J.

1973-01-01

A program was conducted to evaluate the performance of various lubricants in use and considered for use at Kennedy Space Center (KSC). The overall objectives of the program were to: (1) determine the lubrication characteristics and relative corrosion resistance of lubricants in use and proposed for use at KSC; (2) identify materials which may be equivalent to or better than KELF-90 and Krytox 240 AC greases; and (3) identify or develop an improved lubricating oil suitable for use in liquid oxygen (LOX) pumps at KSC. It was concluded that: (1) earth gel thickened greases are very poor corrosion preventive materials in the KSC environment; (2) Halocarbon 25-5S and Braycote 656 were suitable substiutes for KELF-90 and Krytox 240 AC respectively; and (3) none of the oils evaluated possessed the necessary inertness, lubricity, and corrosion prevention characteristics for the KSC LOX pumping systems in their present configuration.

Identification and feasibility test of specialized rural pedestrian safety training. Volume 2, PEDSAFE elementary materials

DOT National Transportation Integrated Search

1981-03-30

This report (Volume 2 of four volumes) serves as a users guide for elementary schools implementing the PEDSAFE Program. Volume 1 of this report describes the conduct and results of the evaluation of the entire PEDSAFE Program and provides recommendat...

ETV Program Report: Coatings for Wastewater Collection Systems - Protective Liner Systems, Inc., Epoxy Mastic, PLS-614

EPA Science Inventory

The Protective Liner Systems International, Inc. Epoxy Mastic PLS-614 coating used for wastewater collection system rehabilitation was evaluated by EPA’s Environmental Technology Verification Program under laboratory conditions at the Center for Innovative Grouting Material and T...

40 CFR 146.70 - Information to be evaluated by the Director.

Code of Federal Regulations, 2010 CFR

2010-07-01

... zone. Such data shall include a description of each well's type, construction, date drilled, location... program, well materials specifications and their life expectancy, logging procedures, deviation checks, and a drilling, testing and coring program; and (17) A demonstration pursuant to part 144, subpart F...

EVALUATION OF THE IMPLEMENTATION OF ASBESTOS OPERATIONS AND MAINTENANCE PROGRAMS IN NEW JERSEY SCHOOLS

EPA Science Inventory

Removal of asbestos-containing materials (ACM) was encouraged over alternative approaches of asbestos management in the past. However, in-place management and operstions nd maintenance programs are currently viewed by the EPA as the most appropriate overall strategy for managemen...

Stochastic-Strength-Based Damage Simulation of Ceramic Matrix Composite Laminates

NASA Technical Reports Server (NTRS)

Nemeth, Noel N.; Mital, Subodh K.; Murthy, Pappu L. N.; Bednarcyk, Brett A.; Pineda, Evan J.; Bhatt, Ramakrishna T.; Arnold, Steven M.

2016-01-01

The Finite Element Analysis-Micromechanics Analysis Code/Ceramics Analysis and Reliability Evaluation of Structures (FEAMAC/CARES) program was used to characterize and predict the progressive damage response of silicon-carbide-fiber-reinforced reaction-bonded silicon nitride matrix (SiC/RBSN) composite laminate tensile specimens. Studied were unidirectional laminates [0] (sub 8), [10] (sub 8), [45] (sub 8), and [90] (sub 8); cross-ply laminates [0 (sub 2) divided by 90 (sub 2),]s; angled-ply laminates [plus 45 (sub 2) divided by -45 (sub 2), ]s; doubled-edge-notched [0] (sub 8), laminates; and central-hole laminates. Results correlated well with the experimental data. This work was performed as a validation and benchmarking exercise of the FEAMAC/CARES program. FEAMAC/CARES simulates stochastic-based discrete-event progressive damage of ceramic matrix composite and polymer matrix composite material structures. It couples three software programs: (1) the Micromechanics Analysis Code with Generalized Method of Cells (MAC/GMC), (2) the Ceramics Analysis and Reliability Evaluation of Structures Life Prediction Program (CARES/Life), and (3) the Abaqus finite element analysis program. MAC/GMC contributes multiscale modeling capabilities and micromechanics relations to determine stresses and deformations at the microscale of the composite material repeating-unit-cell (RUC). CARES/Life contributes statistical multiaxial failure criteria that can be applied to the individual brittle-material constituents of the RUC, and Abaqus is used to model the overall composite structure. For each FEAMAC/CARES simulation trial, the stochastic nature of brittle material strength results in random, discrete damage events that incrementally progress until ultimate structural failure.

Fluorine lubricated bearing technology

NASA Technical Reports Server (NTRS)

Mallaire, F. R.

1973-01-01

An experimental program was conducted to evaluate and select materials for ball bearings intended for use in liquid fluorine and/or FLOX. The ability of three different ball-separator materials, each containing nickel, to form and transfer a nickel fluoride film to provide effective lubrication at the required areas of a ball bearing operating in liquid fluorine was evaluated. In addition, solid lubrication of a ball bearing operating in liquid fluorine by either a fused fluoride coating applied to all surfaces of the ball separator or by a fluoride impregnation of porous sintered material ball separators was evaluated. Less bearing wear occurred when tests were conducted in the less reactive FLOX. Bearings fabricated from any of the materials tested would have relatively short wear lives and would require frequent replacement in a reusable engine.

Application study of filamentary composites in a commercial jet aircraft fuselage

NASA Technical Reports Server (NTRS)

Johnson, R. W.; June, R. R.

1972-01-01

A study of applications of filamentary composite materials to aircraft fuselage structure was performed. General design criteria were established and material studies conducted using the 727-200 forebody as the primary structural component. Three design approaches to the use of composites were investigated: uniaxial reinforcement of metal structure, uniaxial and biaxial reinforcement of metal structure, and an all-composite design. Materials application studies for all three concepts were conducted on fuselage shell panels, keel beam, floor beams, floor panels, body frames, fail-safe straps, and window frames. Cost benefit studies were conducted and developmental program costs estimated. On the basis of weight savings, cost effectiveness, developmental program costs, and potential for early application on commercial aircraft, the unaxial design is recommended for a 5-year flight service evaluation program.

Cockpit resource management at USAir

NASA Technical Reports Server (NTRS)

Sellards, Robert

1987-01-01

The current USAir CRM program is presented. The lessons learned and the program issues are combined. The training material was developed after an extensive literature search and pilot interview survey to determine the problem. The investigation led to the design, implementation, and evaluation of a behavioral science awareness training program. The need was found, and the target population was identified as the pilot group.

Guidelines for the Effective Implementation and Administration of Law-Related Education: Including an Addendum for Guidelines for LRE Instructor Training and Program Evaluation.

ERIC Educational Resources Information Center

Colorado State Dept. of Education, Denver.

This booklet defines law-related education as an educational program for teaching non-lawyers about law, the legal system, and the fundamental principles and values on which constitutional democracy is based. The program's approach is characterized by relevant curriculum materials, interactive teaching strategies, and extensive use of the…

A REPORT ON EXPERIMENTATION IN THE TEACHING OF THE FIRST COURSE IN ALGEBRA AT EL CAMINO COLLEGE.

ERIC Educational Resources Information Center

MANSFIELD, HENRY, JR.

AN INITIAL ATTEMPT TO EVALUATE PROGRAMED INSTRUCTIONAL MATERIAL IN ALGEBRA CLASSES LED TO FURTHER EXPERIMENTATION WITH A VARIETY OF PROCEDURES. IN 1964-65, NO SIGNIFICANT DIFFERENCES WERE FOUND IN THE PERCENT OF STUDENTS SUCCEEDING IN PROGRAMED AND CONVENTIONAL CLASSES, THOUGH STUDENTS IN PROGRAMED SECTIONS DID NOT SEEM MOTIVATED TO WORK AT THEIR…

Progress toward determining the potential of ODS alloys for gas turbine applications

NASA Technical Reports Server (NTRS)

Dreshfield, R. L.; Hoppin, G., III; Sheffler, K.

1983-01-01

The Materials for Advanced Turbine Engine (MATE) Program managed by the NASA Lewis Research Center is supporting two projects to evaluate the potential of oxide dispersion strengthened (ODS) alloys for aircraft gas turbine applications. One project involves the evaluation of Incoloy (TM) MA-956 for application as a combustor liner material. An assessment of advanced engine potential will be conducted by means of a test in a P&WA 2037 turbofan engine. The other project involves the evaluation of Inconel (TM) MA 6000 for application as a high pressure turbine blade material and includes a test in a Garrett TFE 731 turbofan engine. Both projects are progressing toward these engine tests in 1984.

Nutrition. Learning Activity Package.

ERIC Educational Resources Information Center

Lee, Carolyn

This learning activity package on nutrition is one of a series of 12 titles developed for use in health occupations education programs. Materials in the package include objectives, a list of materials needed, a list of definitions, information sheets, reviews (self evaluations) of portions of the content, and answers to reviews. These topics are…

Shock & Anaphylactic Shock. Learning Activity Package.

ERIC Educational Resources Information Center

Hime, Kirsten

This learning activity package on shock and anaphylactic shock is one of a series of 12 titles developed for use in health occupations education programs. Materials in the package include objectives, a list of materials needed, information sheets, reviews (self evaluations) of portions of the content, and answers to reviews. These topics are…

STABILIZATION OF MERCURY IN WASTE MATERIAL FROM THE SULFUR BANK MERCURY MINE, INNOVATIVE TECHNOLOGY EVALUATION REPORT

EPA Science Inventory

Three innovative technologies for stabilization of mercury were demonstrated in a treatability study performed on two waste rock materials from the Sulfur Bank Mercury Mine, a Superfund site in northern California. The treatability study was jointly sponsored by two EPA programs:...

Study program for encapsulation materials interface for low-cost solar array

NASA Technical Reports Server (NTRS)

Kaelble, D. H.; Mansfeld, F. B.; Kendig, M.; Leung, C.

1981-01-01

The service integrity of the bonded interface in solar cell modules used in solar arrays is addressed. The development of AC impedance as a nondestructive evaluation (NDE) methodology for solar arrays is reported along with development of corrosion models and materials selection criteria for corrosion resistant interfaces.

Planning for Student Assessment: Participant's Handbook. Bilingual Evaluation Technical Assistance, Workshop III.

ERIC Educational Resources Information Center

California Univ., Los Angeles. Center for the Study of Evaluation.

This participant's handbook is designed to be used in conjunction with a workshop for planning bilingual student assessment. The following materials are included: (1) simulation materials, including descriptions of simulated programs, tests, test manuals, and printouts; (2) checklists, diagrams, and charts illustrating important points of the…

Oral Hygiene. Learning Activity Package.

ERIC Educational Resources Information Center

Hime, Kirsten

This learning activity package on oral hygiene is one of a series of 12 titles developed for use in health occupations education programs. Materials in the package include objectives, a list of materials needed, a list of definitions, information sheets, reviews (self evaluations) of portions of the content, and answers to reviews. These topics…

Grooming. Learning Activity Package.

ERIC Educational Resources Information Center

Stark, Pamela

This learning activity package on grooming for health workers is one of a series of 12 titles developed for use in health occupations education programs. Materials in the package include objectives, a list of materials needed, information sheets, reviews (self evaluations) of portions of the content, and answers to reviews. These topics are…

EVALUATING MC AND A EFFECTIVENESS TO VERIFY THE PRESENCE OF NUCLEAR MATERIALS

DOE Office of Scientific and Technical Information (OSTI.GOV)

P. G. DAWSON; J. A MORZINSKI; ET AL

Traditional materials accounting is focused exclusively on the material balance area (MBA), and involves periodically closing a material balance based on accountability measurements conducted during a physical inventory. In contrast, the physical inventory for Los Alamos National Laboratory's near-real-time accounting system is established around processes and looks more like an item inventory. That is, the intent is not to measure material for accounting purposes, since materials have already been measured in the normal course of daily operations. A given unit process operates many times over the course of a material balance period. The product of a given unit process maymore » move for processing within another unit process in the same MBA or may be transferred out of the MBA. Since few materials are unmeasured the physical inventory for a near-real-time process area looks more like an item inventory. Thus, the intent of the physical inventory is to locate the materials on the books and verify information about the materials contained in the books. Closing a materials balance for such an area is a matter of summing all the individual mass balances for the batches processed by all unit processes in the MBA. Additionally, performance parameters are established to measure the program's effectiveness. Program effectiveness for verifying the presence of nuclear material is required to be equal to or greater than a prescribed performance level, process measurements must be within established precision and accuracy values, physical inventory results meet or exceed performance requirements, and inventory differences are less than a target/goal quantity. This approach exceeds DOE established accounting and physical inventory program requirements. Hence, LANL is committed to this approach and to seeking opportunities for further improvement through integrated technologies. This paper will provide a detailed description of this evaluation process.« less

International Space Station Materials: Selected Lessons Learned

NASA Technical Reports Server (NTRS)

Golden, Johnny L.

2007-01-01

The International Space Station (ISS) program is of such complexity and scale that there have been numerous issues addressed regarding safety of materials: from design to manufacturing, test, launch, assembly on-orbit, and operations. A selection of lessons learned from the ISS materials perspective will be provided. Topics of discussion are: flammability evaluation of materials with connection to on-orbit operations; toxicity findings for foams; compatibility testing for materials in fluid systems; and contamination control in precision clean systems and critical space vehicle surfaces.

State Compensatory Education. Final Technical Report 1975-76. Appendixes.

ERIC Educational Resources Information Center

Austin Independent School District, TX. Office of Research and Evaluation.

This material consists of ten appendixes to the Final Report for 1976-77 on the implementation of the Texas state-supported compensatory education program in the Austin Independent School District as evaluated by that district's Office of Research and Evaluation. The instruments used in the evaluation process are described or presented in full,…

Performance Evaluation of the Educational Leader (PEEL): Another Breakthrough in Competency Based Educational Administration.

ERIC Educational Resources Information Center

Metzger, Christa; Lynch, Steven B.

1974-01-01

This paper describes the Performance Evaluation of the Education Leader (PEEL) program, initiated from a study to define the competent school administrator and to develop an instrument to measure administrative competence objectively and accurately. The resulting PEEL materials include the following: (a) "Guidelines for Evaluation: The School…

International Dimensions in American Education: Evaluative Criteria for Precollegiate Programs.

ERIC Educational Resources Information Center

Slouka, Z. J.; Slouka, O.

The purposes of the project described in this document are to identify and evaluate factors which encourage a global perspective in students in grades K-12. The document is presented in three major sections. Section one introduces the scope of the study, discusses objectives, and describes evaluation methods, including reviewing written materials,…

Evaluation of heat- and blast-protection materials

NASA Technical Reports Server (NTRS)

Morrison, J. D.; Lockhart, B. J.

1971-01-01

A program was initiated at the Kennedy Space Center in December 1967 and conducted through December 1969 to evaluate the performance of heat- and blast-protection materials for ground support equipment used during the Apollo/Saturn launches. Materials believed to be generally suitable for heat and blast protection were subjected to launch-exposure tests. Tests were made during the Apollo/Saturn 502, 503, and 505 launches. Tests were also made in a local laboratory, as an alternative to the restrictive requirements of launch-exposure tests, to determine the effects of torch-flame exposure on ablative materials. Five materials were found to be satisfactory in all major test categories. It was determined that torch-flame tests can probably be utilized as an acceptable substitute for the booster-engine-exhaust exposure tests for basic screening of candidate materials.

3500-hour durability testing of ceramic materials for automotive gas turbine engines

NASA Technical Reports Server (NTRS)

Carruthers, W. D.; Richerson, D. W.; Benn, K. W.

1980-01-01

A two-year durability program was performed by AiResearch Phoenix to evaluate four commercially available ceramic materials under simulated automotive gas turbine combustor discharge conditions. These conditions included extended cyclic thermal exposures up to 2500 F and 3500 hr. The four materials selected for evaluation were Norton NCX-34 hot pressed silicon nitride, AiResearch RBN 101 reaction bonded silicon nitride, Carborundum pressureless sintered alpha-SiC and Pure Carbon Co. (British Nuclear Fuels, Ltd.) Refel reaction sintered silicon carbide. These materials were initially exposed to 350 hr/1750 cycles at 1200 and 1370 C. Subsequent exposures to 1050, 2100 and 3500 hr were performed on those materials maintaining 50% of baseline strength after the initial exposure. Additional evaluations of exposed bars included dimensional and weight changes, dye penetrant, specific damping capacity changes, SEM fractography, and X-ray diffraction.

Characterization of the thermal conductivity for Advanced Toughened Uni-piece Fibrous Insulations

NASA Technical Reports Server (NTRS)

Stewart, David A.; Leiser, Daniel B.

1993-01-01

Advanced Toughened Uni-piece Fibrous Insulations (TUFI) is discussed in terms of their thermal response to an arc-jet air stream. A modification of the existing Ames thermal conductivity program to predict the thermal response of these functionally gradient materials is described in the paper. The modified program was used to evaluate the effect of density, surface porosity, and density gradient through the TUFI materials on the thermal response of these insulations. Predictions using a finite-difference code and calculated thermal conductivity values from the modified program were compared with in-depth temperature measurements taken from TUFI insulations during short exposures to arc-jet hypersonic air streams.

Beyond the Event Horizon: Education with Black Holes

NASA Astrophysics Data System (ADS)

Silva, Sarah; Cominsky, L.; Plait, P.; SSU E/PO Group

2006-09-01

The Sonoma State University NASA Education and Public Outreach Program (SSU E/PO), in collaboration with the Denver Museum of Nature & Science (DMNS), NOVA, Thomas Lucas Productions (TLP), the National Science Foundation and E/PO groups across NASA's Astrophysics Division, is creating a series of educational and outreach products for both formal and informal educational settings. The formal (in-class) products are closely tied with the informal (museum and television) products. An NSF-funded digital planetarium show titled "Black Holes: The Other Side of Infinity" was created by DMNS and TLP and is currently showing at several venues, with more planned. Through funding from the Swift and GLAST missions, SSU has developed an accompanying educator workshop and guide to train museum personnel in the use of black hole educational materials so that they can give professional development workshops to local teachers. In addition, SSU E/PO has worked with TLP and NOVA to create a television program ("Monster of the Milky Way") will premiere in the fall of 2006 with accompanying online educational materials. The educator guide materials include activities from NASA Astrophysics missions such as GLAST, Swift, XMM-Newton, and Gravity Probe-B, as well as from the Center for Science Education at Space Sciences Laboratory and the HEASARC education programs. We are also creating an online educational resource for use by anyone who wants to find information about black holes. It will have interactive features, including a possible museum kiosk where visitors can explore black holes. All products that are developed as a part of this program include integrated evaluation and assessment. The planetarium show has already had formative evaluation and is in the process of summative evaluation. The workshops include evaluation and follow-up work with the participating educators.

FOOD PROCESSING TECHNOLOGY, A SUGGESTED 2-YEAR POST HIGH SCHOOL CURRICULUM.

ERIC Educational Resources Information Center

KNOEBEL, ROBERT M.; AND OTHERS

ADMINISTRATORS, ADVISORY COMMITTEES, SUPERVISORS, AND TEACHERS MAY USE THIS GUIDE IN PLANNING AND DEVELOPING NEW PROGRAMS OR EVALUATING EXISTING PROGRAMS IN POST-HIGH SCHOOL FOOD PROCESSING TECHNOLOGY. BASIC MATERIALS WERE PREPARED BY THE STATE UNIVERSITY OF NEW YORK AGRICULTURAL AND TECHNICAL COLLEGE AT MORRISVILLE AND FINAL PREPARATION WAS…

34 CFR 642.25 - What is the review process for unsuccessful applicants?

Code of Federal Regulations, 2011 CFR

2011-07-01

...) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION TRAINING PROGRAM FOR FEDERAL TRIO PROGRAMS How... was not evaluated during the competition may request that the Secretary review the application if— (i... notice inviting applications and the other published application materials for the competition; and (ii...

Stewardship matters: Case studies in establishment success of urban trees

Treesearch

Lara A. Roman; Lindsey A. Walker; Catherine M. Martineau; David J. Muffly; Susan A. MacQueen; Winnie Harris

2015-01-01

Urban tree planting initiatives aim to provide ecosystem services that materialize decades after planting, therefore understanding tree survival and growth is essential to evaluating planting program performance. Tree mortality is relatively high during the establishment phase, the first few years after planting. Qualitative assessments of programs with particularly...

Talking Typewriter Training Program in a Rehabilitation Setting.

ERIC Educational Resources Information Center

Kupshunas, Sue

1984-01-01

As part of a state residential center's 16-week training program to assist blind adults, aged 16-65, in acquiring employability skills, clients receive hands-on training in mastering the IBM Memory 100 Audio Unit typewriter. Training includes assessing prerequisite secretarial skills, using self-instructional materials, and evaluating performance.…

Chapter 7. Assessing soil factors in wildland improvement programs

Treesearch

Arthur R. Tiedemann; Carlos F. Lopez

2004-01-01

Soil factors are an important consideration for successful wildland range development or improvement programs. Even though many soil improvement and amelioration practices are not realistic for wildlands, their evaluation is an important step in selection of adapted plant materials for revegetation. This chapter presents information for wildland managers on: the...

EXEMPLARY CENTER FOR READING INSTRUCTION, NEWSLETTER, VOLUME 2, NUMBER 2, FEBRUARY 1968.

ERIC Educational Resources Information Center

REID, ETHNA R.; AND OTHERS

THE NEWSLETTER COLLECTS AND DISTRIBUTES PROFESSIONAL ARTICLES, REPORTS OF OUTSTANDING PROGRAMS, AND INFORMATION ON MATERIALS AND RESEARCH IN THE FIELD OF EDUCATIONAL ENDEAVOR IN GRANITE SCHOOL DISTRICT, UTAH. THIS ISSUE IS CONCERNED WITH THE INSTRUCTIONAL GOALS, PROGRAM PREPARATION, EVALUATION, AND DESIGN OF A DEMONSTRATION CLASSROOM TO DEVELOP…

Rigorous Measures of Implementation: A Methodological Framework for Evaluating Innovative STEM Programs

ERIC Educational Resources Information Center

Cassata-Widera, Amy; Century, Jeanne; Kim, Dae Y.

2011-01-01

The practical need for multidimensional measures of fidelity of implementation (FOI) of reform-based science, technology, engineering, and mathematics (STEM) instructional materials, combined with a theoretical need in the field for a shared conceptual framework that could support accumulating knowledge on specific enacted program elements across…

Bloomfield-Barnhart Developmental Reading Mastery Test: Evaluator's Handbook [and] Individual Pupil Packet.

ERIC Educational Resources Information Center

Barnhart, Cynthia A.; And Others

The Developmental Reading Mastery Test of oral reading, comprehension, spelling, and language skills is based on curriculum materials by the Bloomfield-Barnhart reading program, Let's Read. The non-graded program teaches reading in eleven steps (skill sequences), with corresponding subtests, as follows: (1) shape discrimination, directionality;…

Evaluation Report of the Busby School Title IV Program.

ERIC Educational Resources Information Center

Streiff, Paul R.

In the 1976-77 school year, the Title IV Program included 11 components: continuation of the Parent Advisory Committee; sponsorship of 4 community/school feasts centered around Title IV concerns; employment of classroom aides; development of cultural instructional objectives and materials; elementary school counselor to help meet the most serious…

Colleges Working with Industry. FEDA Paper.

ERIC Educational Resources Information Center

Hughes, Maria

1996-01-01

This handbook, which is intended for individuals involved in program evaluation and improvement at British further education (FE) colleges, contains strategies and materials to help colleges work with industry to make their programs better able to build the skills and knowledge of their local communities. The first two sections offer rationales…

A New Research Agenda for Pre-College Economic Education.

ERIC Educational Resources Information Center

Brenneke, Judith Staley; Soper, John C.

The Joint Council on Economic Education (JCEE) contracted for the development of this research and evaluation agenda (or blueprint) for its Developmental Economic Education Program (DEEP). DEEP involves local school systems in a formal commitment to develop systematic programs in economic education curriculum using academically sound materials and…

Thermal protection system repair kit program

NASA Technical Reports Server (NTRS)

1979-01-01

The feasibility and conceptual design aspects of repair materials and procedures for in orbit repair of the space shuttle orbiter TPS tiles are investigated. Material studies to investigate cure in place materials are described including catalyst and cure studies, ablation tests and evaluations, and support mixing and applicator design. The feasibility of the repair procedures, the storage of the TPS, dispensing, and cure problems are addressed.

Environmental test program for superconducting materials and devices

NASA Technical Reports Server (NTRS)

Haertling, Gene; Randolph, Henry; Hsi, Chi-Shiung; Verbelyi, Darren

1991-01-01

This report is divided into two parts. The first dealing with work involved with Clemson University and the second with the results from Westinghouse/Savannah River. Both areas of work involved low noise, low thermal conductivity superconducting grounding links used in the NASA-sponsored Spectroscopy of the Atmosphere using Far Infrared Emission (SAFIRE) Project. Clemson prepared the links from YBa2Cu3O(7-x) superconductor tape that was mounted on a printed circuit board and encapsulated with epoxy resin. The Clemson program includes temperature vs. resistance, liquid nitrogen immersion, water immersion, thermal cycling, humidity, and radiation testing. The evaluation of the links under a long term environmental test program is described. The Savannah River program includes gamma irradiation, vibration, and long-term evaluation. The progress made in these evaluations is discussed.

Standard test evaluation of graphite fiber/resin matrix composite materials for improved toughness

NASA Technical Reports Server (NTRS)

Chapman, Andrew J.

1984-01-01

Programs sponsored by NASA with the commercial transport manufacturers to develop a technology data base are required to design and build composite wing and fuselage structures. To realize the full potential of composite structures in these strength critical designs, material systems having improved ductility and interlaminar toughness are being sought. To promote systematic evaluation of new materials, NASA and the commercial transport manufacturers have selected and standardized a set of five common tests. These tests evaluate open hole tension and compression performance, compression performance after impact at an energy level of 20 ft-lb, and resistance to delamination. Ten toughened resin matrix/graphite fiber composites were evaluated using this series of tests, and their performance is compared with a widely used composite system.

Hot Hydrogen Testing of Tungsten-Uranium Dioxide (W-UO2) CERMET Fuel Materials for Nuclear Thermal Propulsion

NASA Technical Reports Server (NTRS)

Hickman, Robert; Broadway, Jeramie

2014-01-01

CERMET fuel materials are being developed at the NASA Marshall Space Flight Center for a Nuclear Cryogenic Propulsion Stage. Recent work has resulted in the development and demonstration of a Compact Fuel Element Environmental Test (CFEET) System that is capable of subjecting depleted uranium fuel material samples to hot hydrogen. A critical obstacle to the development of an NCPS engine is the high-cost and safety concerns associated with developmental testing in nuclear environments. The purpose of this testing capability is to enable low-cost screening of candidate materials, fabrication processes, and further validation of concepts. The CERMET samples consist of depleted uranium dioxide (UO2) fuel particles in a tungsten metal matrix, which has been demonstrated on previous programs to provide improved performance and retention of fission products1. Numerous past programs have utilized hot hydrogen furnace testing to develop and evaluate fuel materials. The testing provides a reasonable simulation of temperature and thermal stress effects in a flowing hydrogen environment. Though no information is gained about radiation damage, the furnace testing is extremely valuable for development and verification of fuel element materials and processes. The current work includes testing of subscale W-UO2 slugs to evaluate fuel loss and stability. The materials are then fabricated into samples with seven cooling channels to test a more representative section of a fuel element. Several iterations of testing are being performed to evaluate fuel mass loss impacts from density, microstructure, fuel particle size and shape, chemistry, claddings, particle coatings, and stabilizers. The fuel materials and forms being evaluated on this effort have all been demonstrated to control fuel migration and loss. The objective is to verify performance improvements of the various materials and process options prior to expensive full scale fabrication and testing. Post test analysis will include weight percent fuel loss, microscopy, dimensional tolerance, and fuel stability.

Review of the Agard S&M panel evaluation program of the NASA-Lewis 'SRP' approach to high-temperature LCF life prediction. [Strainrange Partitioning for Low Cycle Fatigue

NASA Technical Reports Server (NTRS)

Hirschberg, M. H.

1978-01-01

Twenty laboratories in six countries participated in this program, each testing its own materials of interest under its own laboratory conditions. In this way the results obtained provided validation of the Strainrange Partitioning (SRP) method for a wide range of materials and insured maximum usefulness to each of the participating laboratories. The first, very necessary step in the evaluation of any life prediction approach - assessing the ability of the method to predict life of simple laboratory specimens subjected to complex loading, was thereby taken. The culmination of this program was the Specialists Meeting that was held in Aalborg, Denmark in April of 1978. At that meeting the various investigators shared their findings, thus providing the basis for an in-depth evaluation of the SRP method. While the results were variable from laboratory to laboratory, most investigators agreed that the SRP method was a significant step toward life prediction in the presence of high temperature and cyclic stresses.

Exploring the Relationship Between Treatment Satisfaction, Perceived Improvements in Functioning and Well-Being and Gambling Harm Reduction Among Clients of Pathological Gambling Treatment Programs

PubMed Central

Bernhard, Bo; Abarbanel, Brett L. L.; St. John, Sarah; Kalina, Ashlee

2014-01-01

The objective of this study was to evaluate the relationship between treatment service quality, perceived improvement in social, functional, and material well-being and reduction in gambling behaviors among clients of Nevada state-funded pathological gambling treatment programs. Utilizing survey data from 361 clients from 2009 to 2010, analyses revealed that client satisfaction with treatment services is positively associated with perceived improvements in social, functional, and material well-being, abstinence from gambling, reduction in gambling thoughts and reduction in problems associated with gambling, even after controlling for various respondent characteristics. These findings can be useful to treatment program staff in managing program development and allocating resources. PMID:23756725

Materials technology for Stirling space power converters

NASA Technical Reports Server (NTRS)

Baggenstoss, William; Mittendorf, Donald

1992-01-01

This program was conducted in support of the NASA LeRC development of the Stirling power converter (SPC) for space power applications. The objectives of this contract were: (1) to perform a technology review and analyses to support the evaluation of materials issues for the SPC; (2) to evaluate liquid metal compatibility issues of the SPC; (3) to evaluate and define a transient liquid phase diffusion bonding (TLPDB) process for the SPC joints to the Udimet 720 heater head; and (4) to evaluate alternative (to the TLPDB) joining techniques. In the technology review, several aspects of the current Stirling design were examined including the power converter assembly process, materials joining, gas bearings, and heat exchangers. The supporting analyses included GLIMPS power converter simulation in support of the materials studies, and system level analysis in support of the technology review. The liquid metal compatibility study evaluated process parameters for use in the Stirling power converter. The alternative joining techniques study looked at the applicability of various joining techniques to the Stirling power converter requirements.

Interdisciplinary research and education in the Vienna Doctoral Programme on Water Resource Systems: a framework for evaluation

NASA Astrophysics Data System (ADS)

Bloeschl, G.; Carr, G.; Loucks, D. P.

2017-12-01

Greater understanding of how interdisciplinary research and education evolves is critical for identifying and implementing appropriate programme management strategies. We propose a program evaluation framework that is based on social learning processes (individual learning, interdisciplinary research practices, and interaction between researchers with different backgrounds); social capital outcomes (ability to interact, interpersonal connectivity, and shared understanding); and knowledge and human capital outcomes (new knowledge that integrates multiple research fields). The framework is tested on established case study doctoral program: the Vienna Doctoral Program on Water Resource Systems. Data are collected via mixed qualitative/quantitative methods that include semi-structured interviews, publication co-author analysis, analysis of research proposals, categorisation of the interdisciplinarity of publications and graduate analysis. Through the evaluation and analysis, several interesting findings about how interdisciplinary research evolves and can be supported are identified. Firstly, different aspects of individual learning seem to contribute to a researcher's ability to interact with researchers from other research fields and work collaboratively. These include learning new material from different research fields, learning how to learn new material and learning how to integrate different material. Secondly, shared interdisciplinary research practices can be identified that may be common to other programs and support interaction and shared understanding between different researchers. They include clarification and questioning, harnessing differences and setting defensible research boundaries. Thirdly, intensive interaction between researchers from different backgrounds support connectivity between the researchers, further enabling cross-disciplinary collaborative work. The case study data suggest that social learning processes and social capital outcomes precede new interdisciplinary research findings and are therefore a critical aspect to consider in interdisciplinary program management.

Nondestructive Evaluation of the J-2X Direct Metal Laser Sintered Gas Generator Discharge Duct

NASA Technical Reports Server (NTRS)

Esther, Elizabeth A.; Beshears, Ronald D.; Lash, Rhonda K.

2012-01-01

The J-2X program at NASA's Marshall Space Flight Center (MSFC) procured a direct metal laser sintered (DMLS) gas generator discharge duct from Pratt & Whitney Rocketdyne and Morris Technologies for a test program that would evaluate the material properties and durability of the duct in an engine-like environment. DMLS technology was pursued as a manufacturing alternative to traditional techniques, which used off nominal practices to manufacture the gas generator duct's 180 degree turn geometry. MSFC's Nondestructive Evaluation (NDE) Team performed radiographic, ultrasonic, computed tomographic, and fluorescent penetrant examinations of the duct. Results from the NDE examinations reveal some shallow porosity but no major defects in the as-manufactured material. NDE examinations were also performed after hot-fire testing the gas generator duct and yielded similar results pre and post-test and showed no flaw growth or development.

Energy Conversion and Storage Program

NASA Astrophysics Data System (ADS)

Cairns, E. J.

1993-06-01

This report is the 1992 annual progress report for the Energy Conversion and Storage Program, a part of the Energy and Environment Division of the Lawrence Berkeley Laboratory. Work described falls into three broad areas: electrochemistry; chemical applications; and materials applications. The Energy Conversion and Storage Program applies principles of chemistry and materials science to solve problems in several areas: (1) production of new synthetic fuels, (2) development of high-performance rechargeable batteries and fuel cells, (3) development of advanced thermochemical processes for energy conversion, (4) characterization of complex chemical processes and chemical species, and (5) study and application of novel materials for energy conversion and transmission. Projects focus on transport-process principles, chemical kinetics, thermodynamics, separation processes, organic and physical chemistry, novel materials, and advanced methods of analysis. Electrochemistry research aims to develop advanced power systems for electric vehicle and stationary energy storage applications. Chemical applications research includes topics such as separations, catalysis, fuels, and chemical analyses. Included in this program area are projects to develop improved, energy-efficient methods for processing product and waste streams from synfuel plants, coal gasifiers, and biomass conversion processes. Materials applications research includes evaluation of the properties of advanced materials, as well as development of novel preparation techniques. For example, techniques such as sputtering, laser ablation, and poised laser deposition are being used to produce high-temperature superconducting films.

Radiation Damage Workshop report. [solar cells

NASA Technical Reports Server (NTRS)

Rahilly, W. P.

1980-01-01

The starting material, cell design/geometry, and cell processing/fabrication for silicon and gallium arsenide solar cells are addressed with reference to radiation damage. In general, it is concluded that diagnostic sensitivities and material purities are basic to making significant gains in end-of-life performance and thermal annealability. Further, GaAs material characterization is so sketchy that a well defined program to evaluate such material for solar cell application is needed to maximize GaAs cell technology benefits.

An Evaluation of Levels of Adaptation Used in the Teaching of Foreign University Degree Programs in China

ERIC Educational Resources Information Center

Willis, Mike

2004-01-01

Many universities now deliver courses and programs in overseas markets such as China. Often these programs are delivered by foreign academics who teach in these overseas locations. This style and format of educational delivery raises the issue of the degree to which subject material and teaching styles need to be adapted to meet the needs of…

Individually Administered Problems. Third Grade. Evaluation Report 4-B-3. Extended Pilot Trial of the Comprehensive School Mathematics Program.

ERIC Educational Resources Information Center

Herbert, Martin

The Comprehensive School Mathematics Program (CSMP) is a program of CEMREL, Inc., one of the national educational laboratories, and was funded by the National Institute of Education (NIE). Its major purpose is the development of curriculum materials for the elementary grades. Beginning in 1973, CSMP ran an extended pilot trial of its elementary…

Individually Administered Problems. Fourth Grade. Evaluation Report 5-B-2. Extended Pilot Trial of the Comprehensive School Mathematics Program.

ERIC Educational Resources Information Center

Dougherty, Knowles; Herbert, Martin

The Comprehensive School Mathematics Program (CSMP) is a program of CEMREL, Inc., one of the national educational laboratories, and was funded by the National Institute of Education (NIE). Its major purpose is the development of curriculum materials for the elementary grades. Beginning in September 1973, CSMP ran an extended pilot trial of its…

Fourth Grade MANS Test Data. Evaluation Report 5-B-1. Extended Pilot Trial of the Comprehensive School Mathematics Program.

ERIC Educational Resources Information Center

Herbert, Martin

The Comprehensive School Mathematics Program (CSMP) is a program of CEMREL, Inc., one of the national educational laboratories, and was funded by the National Institute of Education (NIE). Its major purpose is the development of curriculum materials for the elementary grades. Beginning in 1973, CSMP ran an extended pilot trial of its elementary…

Modifications of ORNL's computer programs MSF-21 and VTE-21 for the evaluation and rapid optimization of multistage flash and vertical tube evaporators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glueckstern, P.; Wilson, J.V.; Reed, S.A.

1976-06-01

Design and cost modifications were made to ORNL's Computer Programs MSF-21 and VTE-21 originally developed for the rapid calculation and design optimization of multistage flash (MSF) and multieffect vertical tube evaporator (VTE) desalination plants. The modifications include additional design options to make possible the evaluation of desalting plants based on current technology (the original programs were based on conceptual designs applying advanced and not yet proven technological developments and design features) and new materials and equipment costs updated to mid-1975.

Utilization-focused evaluation of a STEM enrichment program

NASA Astrophysics Data System (ADS)

Carter, Sally

The purpose of this study was to determine the impact and utilization of a STEM enrichment program (hereafter referred to as The Program). The Program consisted of two parts. First an educator resource center provided free educational materials throughout The Program’s home state. The second part of The Program was a network of education specialists who provided professional development for teachers, modeled lessons with students, and provided presentations for the general public. The problem addressed by this study was a lack of knowledge regarding the impact of The Program. The Program’s director requested a utilization-focused program evaluation to answer thirteen questions. Questions covered Program impact for five areas: overall impact on teachers, overall impact on students, overall impact of materials, overall impact of Program personnel, and overall impact on STEM education. A mixed-methods case study was designed to gather data. Quantitative data included Program archival data regarding the number of contacts and a survey distributed to teachers who had used The Program’s services on at least one occasion. Qualitative data included written comments gathered from the teacher surveys, seven teacher focus groups, and four Program personnel interviews. Data found an overall positive Program impact in all five areas. Both quantitative and qualitative data showed favorable perceptions by teachers and Program personnel. It is not known if data from this case study can be generalized to other STEM enrichment programs. Future research might include a study to determine if The Program’s model could be used to generate new STEM enrichment programs.

Alternate nozzle ablative materials program

NASA Technical Reports Server (NTRS)

Kimmel, N. A.

1984-01-01

Four subscale solid rocket motor tests were conducted successfully to evaluate alternate nozzle liner, insulation, and exit cone structural overwrap components for possible application to the Space Shuttle Solid Rocket Motor (SRM) nozzle asasembly. The 10,000 lb propellant motor tests were simulated, as close as practical, the configuration and operational environment of the full scale SRM. Fifteen PAN based and three pitch based materials had no filler in the phenolic resin, four PAN based materials had carbon microballoons in the resin, and the rest of the materials had carbon powder in the resin. Three nozzle insulation materials were evaluated; an aluminum oxide silicon oxide ceramic fiber mat phenolic material with no resin filler and two E-glass fiber mat phenolic materials with no resin filler. It was concluded by MTI/WD (the fabricator and evaluator of the test nozzles) and NASA-MSFC that it was possible to design an alternate material full scale SRM nozzle assembly, which could provide an estimated 360 lb increased payload capability for Space Shuttle launches over that obtainable with the current qualified SRM design.

Green material selection for sustainability: A hybrid MCDM approach.

PubMed

Zhang, Honghao; Peng, Yong; Tian, Guangdong; Wang, Danqi; Xie, Pengpeng

2017-01-01

Green material selection is a crucial step for the material industry to comprehensively improve material properties and promote sustainable development. However, because of the subjectivity and conflicting evaluation criteria in its process, green material selection, as a multi-criteria decision making (MCDM) problem, has been a widespread concern to the relevant experts. Thus, this study proposes a hybrid MCDM approach that combines decision making and evaluation laboratory (DEMATEL), analytical network process (ANP), grey relational analysis (GRA) and technique for order performance by similarity to ideal solution (TOPSIS) to select the optimal green material for sustainability based on the product's needs. A nonlinear programming model with constraints was proposed to obtain the integrated closeness index. Subsequently, an empirical application of rubbish bins was used to illustrate the proposed method. In addition, a sensitivity analysis and a comparison with existing methods were employed to validate the accuracy and stability of the obtained final results. We found that this method provides a more accurate and effective decision support tool for alternative evaluation or strategy selection.

Green material selection for sustainability: A hybrid MCDM approach

PubMed Central

Zhang, Honghao; Peng, Yong; Tian, Guangdong; Wang, Danqi; Xie, Pengpeng

2017-01-01

Green material selection is a crucial step for the material industry to comprehensively improve material properties and promote sustainable development. However, because of the subjectivity and conflicting evaluation criteria in its process, green material selection, as a multi-criteria decision making (MCDM) problem, has been a widespread concern to the relevant experts. Thus, this study proposes a hybrid MCDM approach that combines decision making and evaluation laboratory (DEMATEL), analytical network process (ANP), grey relational analysis (GRA) and technique for order performance by similarity to ideal solution (TOPSIS) to select the optimal green material for sustainability based on the product's needs. A nonlinear programming model with constraints was proposed to obtain the integrated closeness index. Subsequently, an empirical application of rubbish bins was used to illustrate the proposed method. In addition, a sensitivity analysis and a comparison with existing methods were employed to validate the accuracy and stability of the obtained final results. We found that this method provides a more accurate and effective decision support tool for alternative evaluation or strategy selection. PMID:28498864

Comprehensive testing to measure the response of butyl rubber to Hanford tank waste simulant

DOE Office of Scientific and Technical Information (OSTI.GOV)

NIGREY,PAUL J.

This report presents the findings of the Chemical Compatibility Program developed to evaluate plastic packaging components that may be incorporated in packaging mixed-waste forms for transportation. Consistent with the methodology outlined in this report, the authors performed the second phase of this experimental program to determine the effects of simulant Hanford tank mixed wastes on packaging seal materials. That effort involved the comprehensive testing of five plastic liner materials in an aqueous mixed-waste simulant. The testing protocol involved exposing the materials to {approximately}143, 286, 571, and 3,670 krad of gamma radiation and was followed by 7-, 14-, 28-, 180-day exposuresmore » to the waste simulant at 18, 50, and 60 C. Butyl rubber samples subjected to the same protocol were then evaluated by measuring seven material properties: specific gravity, dimensional changes, mass changes, hardness, compression set, vapor transport rates, and tensile properties. From the analyses, they determined that butyl rubber has relatively good resistance to radiation, this simulant, and a combination of these factors. These results suggest that butyl rubber is a relatively good seal material to withstand aqueous mixed wastes having similar composition to the one used in this study.« less

Response of ethylene propylene diene monomer rubber (EPDM) to simulant Hanford tank waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

NIGREY,PAUL J.

2000-02-01

This report presents the findings of the Chemical Compatibility Program developed to evaluate plastic packaging components that may be incorporated in packaging mixed-waste forms for transportation. Consistent with the methodology outlined in this report, the author performed the second phase of this experimental program to determine the effects of simulant Hanford tank mixed wastes on packaging seal materials. That effort involved the comprehensive testing of five plastic liner materials in an aqueous mixed-waste simulant. The testing protocol involved exposing the materials to {approximately}143, 286, 571, and 3,670 krad of gamma radiation and was followed by 7-, 14-, 28-, 180-day exposuresmore » to the waste simulant at 18, 50, and 60 C. Ethylene propylene diene monomer (EPDM) rubber samples subjected to the same protocol were then evaluated by measuring seven material properties: specific gravity, dimensional changes, mass changes, hardness, compression set, vapor transport rates, and tensile properties. The author has determined that EPDM rubber has excellent resistance to radiation, this simulant, and a combination of these factors. These results suggest that EPDM is an excellent seal material to withstand aqueous mixed wastes having similar composition to the one used in this study.« less

Mechanisms Underpinning Degradation of Protective Oxides and Thermal Barrier Coatings in High Hydrogen Content (HHC) - Fueled Turbines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mumm, Daniel

2013-08-31

The overarching goal of this research program has been to evaluate the potential impacts of coal-derived syngas and high-hydrogen content fuels on the degradation of turbine hot-section components through attack of protective oxides and thermal barrier coatings. The primary focus of this research program has been to explore mechanisms underpinning the observed degradation processes, and connections to the combustion environments and characteristic non-combustible constituents. Based on the mechanistic understanding of how these emerging fuel streams affect materials degradation, the ultimate goal of the program is to advance the goals of the Advanced Turbine Program by developing materials design protocols leadingmore » to turbine hot-section components with improved resistance to service lifetime degradation under advanced fuels exposures. This research program has been focused on studying how: (1) differing combustion environments – relative to traditional natural gas fired systems – affect both the growth rate of thermally grown oxide (TGO) layers and the stability of these oxides and of protective thermal barrier coatings (TBCs); and (2) how low levels of fuel impurities and characteristic non-combustibles interact with surface oxides, for instance through the development of molten deposits that lead to hot corrosion of protective TBC coatings. The overall program has been comprised of six inter-related themes, each comprising a research thrust over the program period, including: (i) evaluating the role of syngas and high hydrogen content (HHC) combustion environments in modifying component surface temperatures, heat transfer to the TBC coatings, and thermal gradients within these coatings; (ii) understanding the instability of TBC coatings in the syngas and high hydrogen environment with regards to decomposition, phase changes and sintering; (iii) characterizing ash deposition, molten phase development and infiltration, and associated corrosive/thermo-chemical attack mechanisms; (iv) developing a mechanics-based analysis of the driving forces for crack growth and delamination, based on molten phase infiltration, misfit upon cooling, and loss of compliance; (v) understanding changes in TGO growth mechanisms associated with these emerging combustion product streams; and (vi) identifying degradation resistant alternative materials (including new compositions or bi-layer concepts) for use in mitigating the observed degradation modes. To address the materials stability concerns, this program integrated research thrusts aimed at: (1) Conducting tests in simulated syngas and HHC environments to evaluate materials evolution and degradation mechanisms; assessing thermally grown oxide development unique to HHC environmental exposures; carrying out high-resolution imaging and microanalysis to elucidate the evolution of surface deposits (molten phase formation and infiltration); exploring thermo-chemical instabilities; assessing thermo-mechanical drivers and thermal gradient effects on degradation; and quantitatively measuring stress evolution due to enhanced sintering and thermo-chemical instabilities induced in the coating. (2) Executing experiments to study the melting and infiltration of simulated ash deposits, and identifying reaction products and evolving phases associated with molten phase corrosion mechanisms; utilizing thermal spray techniques to fabricate test coupons with controlled microstructures to study mechanisms of instability and degradation; facilitating thermal gradient testing; and developing new materials systems for laboratory testing; (3) Correlating information on the resulting combustion environments to properly assess materials exposure conditions and guide the development of lab-scale simulations of material exposures; specification of representative syngas and high-hydrogen fuels with realistic levels of impurities and contaminants, to explore differences in heat transfer, surface degradation, and deposit formation; and facilitating combustion rig testing of materials test coupons.« less

Genesis Radiation Environment

NASA Technical Reports Server (NTRS)

Minow, Joseph I.; Altstatt, Richard L.; Skipworth, William C.

2007-01-01

The Genesis spacecraft launched on 8 August 2001 sampled solar wind environments at L1 from 2001 to 2004. After the Science Capsule door was opened, numerous foils and samples were exposed to the various solar wind environments during periods including slow solar wind from the streamer belts, fast solar wind flows from coronal holes, and coronal mass ejections. The Survey and Examination of Eroded Returned Surfaces (SEERS) program led by NASA's Space Environments and Effects program had initiated access for the space materials community to the remaining Science Capsule hardware after the science samples had been removed for evaluation of materials exposure to the space environment. This presentation will describe the process used to generate a reference radiation Genesis Radiation Environment developed for the SEERS program for use by the materials science community in their analyses of the Genesis hardware.

Physical Medicine and Rehabilitation Resident Use of iPad Mini Mobile Devices.

PubMed

Niehaus, William; Boimbo, Sandra; Akuthota, Venu

2015-05-01

Previous research on the use of tablet devices in residency programs has been undertaken in radiology and medicine or with standard-sized tablet devices. With new, smaller tablet devices, there is an opportunity to assess their effect on resident behavior. This prospective study attempts to evaluate resident behavior after receiving a smaller tablet device. To evaluate whether smaller tablet computers facilitate residents' daily tasks. Prospective study that administered surveys to evaluate tablet computer use. Residency program. Thirteen physical medicine and rehabilitation residents. Residents were provided 16-GB iPad Minis and surveyed with Redcap to collect usage information at baseline, 3, and 6 months. Survey analysis was conducted using SAS (SAS, Cary, NC) for descriptive analysis. To evaluate multiple areas of resident education, the following tasks were selected: accessing e-mail, logging duty hours, logging procedures, researching clinical information, accessing medical journals, reviewing didactic presentations, and completing evaluations. Then, measurements were taken of: (1) residents' response to how tablet computers made it easier to access the aforementioned tasks; and (2) residents' response to how tablet computers affected the frequency they performed the aforementioned tasks. After being provided tablet computers, our physical medicine and rehabilitation residents reported significantly greater access to e-mail, medical journals, and didactic material. Also, receiving tablet computers was reported to increase the frequency that residents accessed e-mail, researched clinical information, accessed medical journals, reviewed didactic presentations, and completed evaluations. After receiving a tablet computer, residents reported an increase in the use of calendar programs, note-taking programs, PDF readers, online storage programs, and file organization programs. These physical medicine and rehabilitation residents reported tablet computers increased access to e-mail, presentation material, and medical journals. Tablet computers also were reported to increase the frequency residents were able to complete tasks associated with residency training. Copyright © 2015 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

A Guide for Selecting Bilingual Bicultural Resource Materials. [Volume I].

ERIC Educational Resources Information Center

Watt, Michael

This is the first of three volumes reporting a project to develop an instrument to evaluate instructional materials used in bilingual education, community language education, and bicultural education programs in Australian schools. The project had three purposes: (1) to examine the research literature on the development of models and instruments…

Framework for the Development of OER-Based Learning Materials in ODL Environment

ERIC Educational Resources Information Center

Teng, Khor Ean; Hung, Chung Sheng

2013-01-01

This paper describes the framework for the development of OER-based learning materials "TCC121/05 Programming Fundamentals with Java" for ODL learners in Wawasan Open University (WOU) using three main development phases mainly: creation, evaluation and production phases. The proposed framework has further been tested on ODL learners to…

Congressional Testimony: Statement of Wade T. Najjum Before the Subcommittee on Environment and Hazardous Materials Committee on Energy and Commerce U.S. House of Representatives

EPA Pesticide Factsheets

Statement of Wade T. Najjum Assistant Inspector General for Program Evaluation Office of Inspector General U.S. EPA Before the Subcommittee on Environment and Hazardous Materials Committee on Energy and Commerce U.S. House of Representatives

Production of Reading Materials. Self Study and Evaluation Guide, 1982 Edition. Section D-7. Revised.

ERIC Educational Resources Information Center

National Accreditation Council for Agencies Serving the Blind and Visually Handicapped, New York, NY.

The guide provides accreditation standards for programs which transcribe printed matter into alternate media for blind and visually handicapped persons. Presented in a self study format, the booklet touches upon six aspects of the production of reading materials (sample subtopics in parentheses): planning and organization (administration,…

The Surgical Scrub. Learning Activity Package.

ERIC Educational Resources Information Center

Runge, Lillian

This learning activity package on the surgical scrub is one of a series of 12 titles developed for use in health occupations education programs. Materials in the package include objectives, a list of materials needed, a list of definitions, information sheets, reviews (self evaluations) of portions of the content, and answers to reviews. These…

The relative efficacy of pamphlets, CD-ROM, and the Internet for disseminating adolescent drug abuse prevention programs: an exploratory study.

PubMed

Di Noia, Jennifer; Schwinn, Traci M; Dastur, Zubin A; Schinke, Steven P

2003-12-01

Despite the availability of an increasing array of empirically validated adolescent drug abuse prevention programs, program materials and evaluation findings are poorly disseminated. CD-ROM and the Internet hold promise for disseminating this information to schools and agencies that directly serve youth, and to policy-making bodies that exercise control over funds to support adolescent drug abuse prevention programming. However, data on the relative efficacy of these newer technologies over conventional print means of dissemination are lacking. Recruited through schools, community agencies, and policy-making bodies, 188 professionals were randomized to receive prevention program materials via pamphlets (55 participants), CD-ROM (64 participants), and the Internet (69 participants). Participants completed pretest, posttest, and 6-month follow-up measures that assessed their access to prevention program materials; self-efficacy for identifying, obtaining, and recommending these programs; and their likelihood of requesting, implementing, and recommending prevention programs to their constituents. Participants exposed to dissemination via CD-ROM and the Internet evidenced the greatest short- and long-term gains on accessibility, self-efficacy, and behavioral intention variables. CD-ROM and the Internet are viable means for disseminating adolescent drug abuse prevention programs to schools, community agencies, and policy-making bodies, and should be increasingly used for dissemination purposes.

The relative efficacy of pamphlets, CD-ROM, and the Internet for disseminating adolescent drug abuse prevention programs: an exploratory study⋆

PubMed Central

Di Noia, Jennifer; Schwinn, Traci M.; Dastur, Zubin A.; Schinke, Steven P.

2010-01-01

Background Despite the availability of an increasing array of empirically validated adolescent drug abuse prevention programs, program materials and evaluation findings are poorly disseminated. CD-ROM and the Internet hold promise for disseminating this information to schools and agencies that directly serve youth, and to policy-making bodies that exercise control over funds to support adolescent drug abuse prevention programming. However, data on the relative efficacy of these newer technologies over conventional print means of dissemination are lacking. Methods Recruited through schools, community agencies, and policy-making bodies, 188 professionals were randomized to receive prevention program materials via pamphlets (55 participants), CD-ROM (64 participants), and the Internet (69 participants). Participants completed pretest, posttest, and 6-month follow-up measures that assessed their access to prevention program materials; self-efficacy for identifying, obtaining, and recommending these programs; and their likelihood of requesting, implementing, and recommending prevention programs to their constituents. Results Participants exposed to dissemination via CD-ROM and the Internet evidenced the greatest short- and long-term gains on accessibility, self-efficacy, and behavioral intention variables. Conclusions CD-ROM and the Internet are viable means for disseminating adolescent drug abuse prevention programs to schools, community agencies, and policy-making bodies, and should be increasingly used for dissemination purposes. PMID:14636798

Online faculty development for creating E-learning materials.

PubMed

Niebuhr, Virginia; Niebuhr, Bruce; Trumble, Julie; Urbani, Mary Jo

2014-01-01

Faculty who want to develop e-learning materials face pedagogical challenges of transforming instruction for the online environment, especially as many have never experienced online learning themselves. They face technical challenges of learning new software and time challenges of not all being able to be in the same place at the same time to learn these new skills. The objective of the Any Day Any Place Teaching (ADAPT) faculty development program was to create an online experience in which faculty could learn to produce e-learning materials. The ADAPT curriculum included units on instructional design, copyright principles and peer review, all for the online environment, and units on specific software tools. Participants experienced asynchronous and synchronous methods, including a learning management system, PC-based videoconferencing, online discussions, desktop sharing, an online toolbox and optional face-to-face labs. Project outcomes were e-learning materials developed and participants' evaluations of the experience. Likert scale responses for five instructional units (quantitative) were analyzed for distance from neutral using one-sample t-tests. Interview data (qualitative) were analyzed with assurance of data trustworthiness and thematic analysis techniques. Participants were 27 interprofessional faculty. They evaluated the program instruction as easy to access, engaging and logically presented. They reported increased confidence in new skills and increased awareness of copyright issues, yet continued to have time management challenges and remained uncomfortable about peer review. They produced 22 new instructional materials. Online faculty development methods are helpful for faculty learning to create e-learning materials. Recommendations are made to increase the success of such a faculty development program.

Computing Reliabilities Of Ceramic Components Subject To Fracture

NASA Technical Reports Server (NTRS)

Nemeth, N. N.; Gyekenyesi, J. P.; Manderscheid, J. M.

1992-01-01

CARES calculates fast-fracture reliability or failure probability of macroscopically isotropic ceramic components. Program uses results from commercial structural-analysis program (MSC/NASTRAN or ANSYS) to evaluate reliability of component in presence of inherent surface- and/or volume-type flaws. Computes measure of reliability by use of finite-element mathematical model applicable to multiple materials in sense model made function of statistical characterizations of many ceramic materials. Reliability analysis uses element stress, temperature, area, and volume outputs, obtained from two-dimensional shell and three-dimensional solid isoparametric or axisymmetric finite elements. Written in FORTRAN 77.

Outcomes and lessons learned from evaluating TRICARE's disease management programs.

PubMed

Dall, Timothy M; Askarinam Wagner, Rachel C; Zhang, Yiduo; Yang, Wenya; Arday, David R; Gantt, Cynthia J

2010-06-01

To share outcomes and lessons learned from an evaluation of disease management (DM) programs for asthma, congestive heart failure (CHF), and diabetes for TRICARE patients. Multiyear evaluation of participants in voluntary, opt-out DM programs. Patient-centered programs, administered by 3 regional contractors, provide phone-based consultations with a care manager, educational materials, and newsletters. The study sample consisted of 23,793 asthma, 4092 CHF, and 29,604 diabetes patients with at least 6 months' tenure in the program. Medical claims were analyzed to quantify program effect on healthcare utilization, medical costs, and clinical outcomes. Multivariate regression analysis with an historical control group was used to predict patient outcomes in the absence of DM. The difference between actual and predicted DM patient outcomes was attributed to the program. A patient survey collected data on program satisfaction and perceived usefulness of program information and services. Modest improvements in patient outcomes included reduced inpatient days and medical costs, and (with few exceptions) increased percentages of patients receiving appropriate medications and tests. Annual per patient reductions in medical costs were $453, $371, and $783 for asthma, CHF, and diabetes program participants, respectively. The estimated return on investment was $1.26 per $1.00 spent on DM services. Findings suggest that the DM programs more than pay for themselves, in addition to improving patient health and quality of life. Lessons learned in program design, implementation, effectiveness, and evaluation may benefit employers contemplating DM, DM providers, and evaluators of DM programs.

Development of a Test to Evaluate Aerothermal Response of Materials to Hypersonic Flow Using a Scramjet Wind Tunnel (Postprint)

DTIC Science & Technology

2010-05-01

SCRAMJET WIND TUNNEL (POSTPRINT) 5a. CONTRACT NUMBER FA8650-10-D-5226-0002 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 62102F 6. AUTHOR(S...prototype scramjet engine as a wind tunnel . A sample holder was designed using combustion fluid dynamics results as inputs into structural models. The...Z39-18 Development of a Test to Evaluate Aerothermal Response of Materials to Hypersonic Flow Using a Scramjet Wind Tunnel Triplicane A

Impact of a provider training program on the treatment of children with autism spectrum disorder at psychosocial care units in Brazil.

PubMed

Silva, Luciana C; Teixeira, Maria C T V; Ribeiro, Edith L; Paula, Cristiane S

2017-12-18

To develop, implement, and verify the impact of a training program for health care providers working with children with autism spectrum disorder (ASD) in psychosocial care centers for children and adolescents (Centro de Atenção Psicossocial à Infância e à Adolescência - CAPSi) in São Paulo, Brazil. This quasi-experimental study was conducted with 14 professionals from four CAPSi units. The training program consisted of six phases: 1) pre-intervention observation; 2) meeting with staff to assess the main needs of the training program; 3) developing materials for training and evaluation; 4) meetings to discuss program implementation; 5) a final meeting for case discussion and evaluation; and 6) distance supervision. Three measures were used to evaluate the training program: i) the Knowledge, Attitudes, and Practices (KAP) questionnaire; ii) videos containing questions designed to assess program comprehension; and iii) a satisfaction survey. Thirteen videos were produced to as visual aids for use during the training program, and a further 26 videos were developed to evaluate it. The program was well evaluated by the participants. The video responses and KAP questionnaire scores suggest that staff knowledge and attitudes improved after training. The positive findings of this study suggest that the tested training program is feasible for use with multidisciplinary teams working in the CAPSi environment.

Management Research Center Report To The External Degree Planning Consortium Of The Policy Institute, SURC On Identification Of Learning Materials.

ERIC Educational Resources Information Center

Fisk, George; Nehmadi, David

A system has been developed to identify, locate and evaluate learning materials for use in an external degree program in management at Syracuse University. It consists of five elements, each of which is a set of physical objects or documents: the interaction of these sets transforms the demand for learning materials into an output of retrieved…

An Investigation of the Relative Effectiveness of the Basic Mathematics Review Program at Essex Community College.

ERIC Educational Resources Information Center

Bloomberg, Jerome

Basic Mathematics Review (BMR) is a remedial non-credit course at Essex Community College (Maryland) being taught on an individualized basis. Following diagnostic testing and placement, instruction utilizes programmed materials, tutors, and self-tests. Evaluation of the new individualized BMR and comparison with the traditional remedial course…

Native American Education Program, 1981-82: O.E.E. Evaluation Report.

ERIC Educational Resources Information Center

Lehman, Sheila

During 1981-82, the Native American Education Program, based in a lower working class neighborhood in Manhattan, served 360 Native American children (K-12) scattered throughout New York City. Goals of visiting and interviewing 50% of the target population of 500 Native American students in the city were substantially realized. Materials and…

Native American Education Program, 1982-83. OEE Evaluation Report.

ERIC Educational Resources Information Center

Inman, Deborah

During 1982-83, the Native American Education Program provided after-school and summer session instruction and supportive services to approximately 450 Native American grade K-12 students scattered throughout New York City. Goals of visiting and interviewing 50% of the target population were realized, with 220 home visits made. Materials and…

Teacher Preparation: A High Intensity Integrated Social Studies Summer Program in a Clinical Setting.

ERIC Educational Resources Information Center

Van Cleaf, David W.; And Others

This paper describes and evaluates a summer program in teacher education--Summer Adventure in Learning (SAIL). The project's major objective was to help preservice teachers design educational materials which would improve the reading accuracy and comprehension of their students. Primary objectives of project SAIL were to provide field-based…

Texas Nutrition Education and Training Program for Federal Fiscal Year 1996. Final Evaluation Report.

ERIC Educational Resources Information Center

Ahmad, Mahassen

The Texas Nutrition Education and Training Program (NET) provides: (1) workshops to teach children about good eating habits in school and in child care facilities; (2) a circulating NET library collection; (3) instructional and promotional materials on nutrition and food service management; (4) presentations, exhibits, and publications on…

A Resource Guide for Career Development in the Junior High School.

ERIC Educational Resources Information Center

Benson, Arland

This resource guide for a developmental junior high career education program contains general and specific behavioral objectives, a program description, and a wide range of resource materials, including student and teacher worksheets and evaluation forms. Developed by a junior high counselor and funded by the Elementary Secondary Education Act,…

Vaccum Gas Tungsten Arc Welding, phase 1

NASA Astrophysics Data System (ADS)

Weeks, J. L.; Krotz, P. D.; Todd, D. T.; Liaw, Y. K.

1995-03-01

This two year program will investigate Vacuum Gas Tungsten Arc Welding (VGTAW) as a method to modify or improve the weldability of normally difficult-to-weld materials. VGTAW appears to offer a significant improvement in weldability because of the clean environment and lower heat input needed. The overall objective of the program is to develop the VGTAW technology and implement it into a manufacturing environment that will result in lower cost, better quality and higher reliability aerospace components for the space shuttle and other NASA space systems. Phase 1 of this program was aimed at demonstrating the process's ability to weld normally difficult-to-weld materials. Phase 2 will focus on further evaluation, a hardware demonstration and a plan to implement VGTAW technology into a manufacturing environment. During Phase 1, the following tasks were performed: (1) Task 11000 Facility Modification - an existing vacuum chamber was modified and adapted to a GTAW power supply; (2) Task 12000 Materials Selection - four difficult-to-weld materials typically used in the construction of aerospace hardware were chosen for study; (3) Task 13000 VGTAW Experiments - welding experiments were conducted under vacuum using the hollow tungsten electrode and evaluation. As a result of this effort, two materials, NARloy Z and Incoloy 903, were downselected for further characterization in Phase 2; and (4) Task 13100 Aluminum-Lithium Weld Studies - this task was added to the original work statement to investigate the effects of vacuum welding and weld pool vibration on aluminum-lithium alloys.

Vaccum Gas Tungsten Arc Welding, phase 1

NASA Technical Reports Server (NTRS)

Weeks, J. L.; Krotz, P. D.; Todd, D. T.; Liaw, Y. K.

1995-01-01

This two year program will investigate Vacuum Gas Tungsten Arc Welding (VGTAW) as a method to modify or improve the weldability of normally difficult-to-weld materials. VGTAW appears to offer a significant improvement in weldability because of the clean environment and lower heat input needed. The overall objective of the program is to develop the VGTAW technology and implement it into a manufacturing environment that will result in lower cost, better quality and higher reliability aerospace components for the space shuttle and other NASA space systems. Phase 1 of this program was aimed at demonstrating the process's ability to weld normally difficult-to-weld materials. Phase 2 will focus on further evaluation, a hardware demonstration and a plan to implement VGTAW technology into a manufacturing environment. During Phase 1, the following tasks were performed: (1) Task 11000 Facility Modification - an existing vacuum chamber was modified and adapted to a GTAW power supply; (2) Task 12000 Materials Selection - four difficult-to-weld materials typically used in the construction of aerospace hardware were chosen for study; (3) Task 13000 VGTAW Experiments - welding experiments were conducted under vacuum using the hollow tungsten electrode and evaluation. As a result of this effort, two materials, NARloy Z and Incoloy 903, were downselected for further characterization in Phase 2; and (4) Task 13100 Aluminum-Lithium Weld Studies - this task was added to the original work statement to investigate the effects of vacuum welding and weld pool vibration on aluminum-lithium alloys.

A One-Year Evaluation of a Free Fissure Sealant Program

PubMed Central

M, Bakhtiar; N, Azadi; A, Golkari

2016-01-01

Statement of Problem: Pit and fissure sealant therapy has been approved as an effective measure in the prevention of occlusal dental caries. Resin based materials are the most common materials used worldwide. A variety of resin based fissure sealants are produced and used. Most of them have been presented with ideal results in research environment. However, their effectiveness in the real life, especially in a mass application program such as Iran’s oral health reform plan is not clear. Objectives: To evaluate the longevity of different fissure sealant applied in Iran’s oral health reform plan in Fars Province (south of Iran) after one year. Materials and Methods: Seven counties were selected. One hundred 6- to 8-year-old school children who had undergone fissure sealant therapy in spring 2015 were randomly selected from each county. Their first molars were examined to evaluate the status of the fissure sealants which were applied one year ago. Data on the type/brand of fissure sealant materials, type and experience of clinicians who applied them, existence of a chair-side assistant, and whether the children were caries-free at the time of fissure sealant application were collected from the existing reports. Results: Data of 1974 teeth from 598 children were used for the final analysis. The effects of type/brand of the material was significant on the final results and remained significant (p < 0.001) after adjustments for the level of fluoride, urban/rural area, upper/lower jaw, type of clinician who applied the sealant, existence of a chair-side assistant, and child’s gender, age, and being caries-free. Conclusions: Many factors affect the success rate of a fissure sealant therapy program. The type/brand of the material remained significantly related to the success rate of the fissure sealant even after adjustments for other influencing factors. In this study, ClinproTM Sealant (3M/ESPE, USA) showed better longevity after one year of application. PMID:28959758

Database of Mechanical Properties of Textile Composites

NASA Technical Reports Server (NTRS)

Delbrey, Jerry

1996-01-01

This report describes the approach followed to develop a database for mechanical properties of textile composites. The data in this database is assembled from NASA Advanced Composites Technology (ACT) programs and from data in the public domain. This database meets the data documentation requirements of MIL-HDBK-17, Section 8.1.2, which describes in detail the type and amount of information needed to completely document composite material properties. The database focuses on mechanical properties of textile composite. Properties are available for a range of parameters such as direction, fiber architecture, materials, environmental condition, and failure mode. The composite materials in the database contain innovative textile architectures such as the braided, woven, and knitted materials evaluated under the NASA ACT programs. In summary, the database contains results for approximately 3500 coupon level tests, for ten different fiber/resin combinations, and seven different textile architectures. It also includes a limited amount of prepreg tape composites data from ACT programs where side-by-side comparisons were made.

Preparation for Medical Librarianship: Status and Potential *

PubMed Central

Zachert, Martha Jane K.

1972-01-01

The educational programs for the preparation of health sciences information personnel are described and the lack of evaluative criteria or studies in relation to these programs is noted. The author recommends an extension of MLA's role in four areas of the educational process: curriculum design, teacher development, development of learning materials, and evaluation of the educational effort. Preconditions for the fulfillment of the projected MLA role are identified as unity of purpose, leadership by the headquarters staff, and money. PMID:16017604

Thermal performance evaluation of the Solargenics solar collector at outdoor conditions

NASA Technical Reports Server (NTRS)

1978-01-01

Test procedures used during the performance of an evaluation program are presented. The test program was conducted to obtain the following performance data and information on the solar collector. (1) thermal performance data under outdoor conditions; (2) structural behavior of collector under static conditions; (3) effects of long term exposure to material weathering elements. The solargenics is a liquid, single-glazed, flat plate collector. Approximate dimensions of each collector are 240 inches long, 36 inches wide, and 3.5 inches in depth.

Toxicity of Uranium Adsorbent Materials using the Microtox Toxicity Test

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, Jiyeon; Jeters, Robert T.; Gill, Gary A.

2015-10-01

The Marine Sciences Laboratory at the Pacific Northwest National Laboratory evaluated the toxicity of a diverse range of natural and synthetic materials used to extract uranium from seawater. The uranium adsorbent materials are being developed as part of the U. S. Department of Energy, Office of Nuclear Energy, Fuel Resources Program. The goal of this effort was to identify whether deployment of a farm of these materials into the marine environment would have any toxic effects on marine organisms.

Constitutive modeling for isotropic materials

NASA Technical Reports Server (NTRS)

Chan, K. S.; Lindholm, U. S.; Bodner, S. R.

1988-01-01

The third and fourth years of a 4-year research program, part of the NASA HOST Program, are described. The program goals were: (1) to develop and validate unified constitutive models for isotropic materials, and (2) to demonstrate their usefulness for structural analysis of hot section components of gas turbine engines. The unified models selected for development and evaluation were those of Bodner-Partom and of Walker. The unified approach for elastic-viscoplastic constitutive equations is a viable method for representing and predicting material response characteristics in the range where strain rate and temperature dependent inelastic deformations are experienced. This conclusion is reached by extensive comparison of model calculations against the experimental results of a test program of two high temperature Ni-base alloys, B1900+Hf and Mar-M247, over a wide temperature range for a variety of deformation and thermal histories including uniaxial, multiaxial, and thermomechanical loading paths. The applicability of the Bodner-Partom and the Walker models for structural applications has been demonstrated by implementing these models into the MARC finite element code and by performing a number of analyses including thermomechanical histories on components of hot sections of gas turbine engines and benchmark notch tensile specimens. The results of the 4-year program have been published in four annual reports. The results of the base program are summarized in this report. The tasks covered include: (1) development of material test procedures, (2) thermal history effects, and (3) verification of the constitutive model for an alternative material.

Summary results of the DOE flywheel development effort

NASA Astrophysics Data System (ADS)

Olszewski, M.; Martin, J. F.

1984-11-01

The technology and applications evaluation task focuses on defining performance and cost requirements for flywheels in the various areas of application. To date the DOE program has focused on automotive applications. The composite materials effort entails the testing of new commercial composites to determine their engineering properties. The rotor and containment development work uses data from these program elements to design and fabricate flywheels. The flywheels are then tested at the Oak Ridge Flywheel Evaluation Laboratory and their performance is evaluated to indicate possible areas for improvement. Once a rotor has been fully developed it is transferred to the private sector.

Feasibility of modern airships - Preliminary assessment

NASA Technical Reports Server (NTRS)

Ardema, M. D.

1977-01-01

Attention is given to the NASA program, Feasibility Study of Modern Airships, initiated to investigate potential research and technology programs associated with airship development. A historical survey of the program is presented, including the development of past airship concepts, aerodynamical and design improvements, structure and material concepts, and research in controls, avionics, instrumentation, flight operations, and ground handling. A mission analysis was carried out which considered passenger and cargo transportation, heavy-lift, short-haul applications, surveillance missions, and the transportation of natural gas. A vehicle parametric analysis examined the entire range of airship concepts, discussing both conventional airships and hybrids. Various design options were evaluated, such as choice of structural materials, use of boundary-layer control, and choice of lifting gas.

Materials Science Laboratory

NASA Technical Reports Server (NTRS)

Jackson, Dionne

2005-01-01

The NASA Materials Science Laboratory (MSL) provides science and engineering services to NASA and Contractor customers at KSC, including those working for the Space Shuttle. International Space Station. and Launch Services Programs. These services include: (1) Independent/unbiased failure analysis (2) Support to Accident/Mishap Investigation Boards (3) Materials testing and evaluation (4) Materials and Processes (M&P) engineering consultation (5) Metrology (6) Chemical analysis (including ID of unknown materials) (7) Mechanical design and fabrication We provide unique solutions to unusual and urgent problems associated with aerospace flight hardware, ground support equipment and related facilities.

Evaluation of solar cells and arrays for potential solar power satellite applications

NASA Technical Reports Server (NTRS)

Almgren, D. W.; Csigi, K.; Gaudet, A. D.

1978-01-01

Proposed solar array designs and manufacturing methods are evaluated to identify options which show the greatest promise of leading up to the develpment of a cost-effective SPS solar cell array design. The key program elements which have to be accomplished as part of an SPS solar cell array development program are defined. The issues focussed on are: (1) definition of one or more designs of a candidate SPS solar array module, using results from current system studies; (2) development of the necessary manufacturing requirements for the candidate SPS solar cell arrays and an assessment of the market size, timing, and industry infrastructure needed to produce the arrays for the SPS program; (3) evaluation of current DOE, NASA and DOD photovoltaic programs to determine the impacts of recent advances in solar cell materials, array designs and manufacturing technology on the candidate SPS solar cell arrays; and (4) definition of key program elements for the development of the most promising solar cell arrays for the SPS program.

Mathematics Applied to Novel Situations (MANS) Test Data. Third Grade. Evaluation Report 4-B-2. Extended Pilot Trial of the Comprehensive School Mathematics Program.

ERIC Educational Resources Information Center

Dougherty, Knowles; Herbert, Martin

The Comprehensive School Mathematics Program (CSMP) is a program of CEMREL, Inc., one of the national educational laboratories, and was funded by the National Institute of Education (NIE). Its major purpose is the development of curriculum materials for the elementary grades. Beginning in 1973, CSMP ran an extended pilot trial of its elementary…

Guidelines for development of structural integrity programs for DOE high-level waste storage tanks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bandyopadhyay, K.; Bush, S.; Kassir, M.

Guidelines are provided for developing programs to promote the structural integrity of high-level waste storage tanks and transfer lines at the facilities of the Department of Energy. Elements of the program plan include a leak-detection system, definition of appropriate loads, collection of data for possible material and geometric changes, assessment of the tank structure, and non-destructive examination. Possible aging degradation mechanisms are explored for both steel and concrete components of the tanks, and evaluated to screen out nonsignificant aging mechanisms and to indicate methods of controlling the significant aging mechanisms. Specific guidelines for assessing structural adequacy will be provided inmore » companion documents. Site-specific structural integrity programs can be developed drawing on the relevant portions of the material in this document.« less

25 CFR 36.50 - Standard XVII-School program evaluation and needs assessment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... assessment. Each school shall complete a formal, formative evaluation at least once every seven (7) years... assessment. 36.50 Section 36.50 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION... other instructional materials. (12) Counseling services. (13) Medical and health services. (14) Student...

25 CFR 36.50 - Standard XVII-School program evaluation and needs assessment.

Code of Federal Regulations, 2011 CFR

2011-04-01

... assessment. Each school shall complete a formal, formative evaluation at least once every seven (7) years... assessment. 36.50 Section 36.50 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION... other instructional materials. (12) Counseling services. (13) Medical and health services. (14) Student...

Drug Education: Goals, Approaches, Evaluation, ERS Report.

ERIC Educational Resources Information Center

Bushey, Julia A.

An examination of the extensive drug education literature as well as of specific school drug education programs indicates that the present confusion over drug education results from confusion over definitions, goals, approaches, and evaluation. This report, based on an examination of recent literature and on information and printed materials on…

Eighth Grade Social Studies. An Experimental Program in Geography and Anthropology.

ERIC Educational Resources Information Center

Hanson, James; And Others

GRADES OR AGES: Grade 8. SUBJECT MATTER: Geography and Anthropology. ORGANIZATION AND PHYSICAL APPEARANCE: The introductory material includes descriptions of geography and anthropology as disciplines, the basic course objectives, techniques for evaluating objectives and a student self-evaluation form. The guide covers six units: 1) "What Kind of…

VI-G, Sec. 661, P.L. 91-230. Final Performance Report.

ERIC Educational Resources Information Center

1976

Presented is the final performance report of the CSDC model which is designed to provide services for learning disabled high school students. Sections cover the following program aspects: organizational structure, inservice sessions, identification of students, materials and equipment, evaluation of student performance, evaluation of the model,…

An assessment of 25-hydroxyvitamin D measurements in comparability studies conducted by the Vitamin D Metabolites Quality Assurance Program.

PubMed

Bedner, Mary; Lippa, Katrice A; Tai, Susan S-C

2013-11-15

The National Institute of Standards and Technology (NIST), in collaboration with the National Institutes of Health Office of Dietary Supplements, established the first accuracy-based program for improving the comparability of vitamin D metabolite measurements, the Vitamin D Metabolites Quality Assurance Program. The study samples were human serum or plasma Standard Reference Materials (SRMs) with 25-hydroxyvitamin D values that were determined at NIST. Participants evaluated the materials using immunoassay (IA), liquid chromatography (LC) with mass spectrometric detection, and LC with ultraviolet absorbance detection. NIST evaluated the results for concordance within the participant community as well as trueness relative to the NIST value. For the study materials that contain mostly 25-hydroxyvitamin D3 (25(OH)D3),the coefficient of variation (CV) for the participant results was consistently in the range from 7% to 19%, and the median values were biased high relative to the NIST values. However, for materials that contain significant concentrations of both 25-hydroxyvitamin D2 (25(OH)D2) and 25(OH)D3, the median IA results were biased lower than both the LC and the NIST values, and the CV was as high as 28%. The first interlaboratory comparison results for SRM 972a Vitamin D Metabolites in Human Serum are also reported. Relatively large within-lab and between-lab variability hinders conclusive assessments of bias and accuracy. © 2013.

Elevated Temperature Testing and Modeling of Advanced Toughened Ceramic Materials

NASA Technical Reports Server (NTRS)

Keith, Theo G.

2005-01-01

The purpose of this report is to provide a final report for the period of 12/1/03 through 11/30/04 for NASA Cooperative Agreement NCC3-776, entitled "Elevated Temperature Testing and Modeling of Advanced Toughened Ceramic Materials." During this final period, major efforts were focused on both the determination of mechanical properties of advanced ceramic materials and the development of mechanical test methodologies under several different programs of the NASA-Glenn. The important research activities made during this period are: 1. Mechanical properties evaluation of two gas-turbine grade silicon nitrides. 2) Mechanical testing for fuel-cell seal materials. 3) Mechanical properties evaluation of thermal barrier coatings and CFCCs and 4) Foreign object damage (FOD) testing.

Selenide isotope generator for the Galileo Mission: SIG thermal insulation evaluaion tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-06-01

Since the SIG program required the use of very high performance thermal insulation materials in rather severe thermal and environmental conditions, a thorough screening and testing program was performed. Several types of materials were included in the preliminary survey. Most promising were oxide and carbonaceous fibrous insulations, oxide and carbonaceous foamed materials, and multilayer materials with both powder and cloth spacers. The latter were only viable for the vacuum option. In all, over one hundred materials from more than sixty manufacturers were evaluated from literature and manufacturers' data. The list was pared to eighteen candidates in seven basic types, i.e.,more » fibrous microporous SiO/sub 2/, fibrous SiO/sub 2//Al/sub 2/O/sub 3/, fibrous ZrO/sub 2/, fibrous carbon, foamed SiO/sub 2/, foamed carbon, and multilayer. Test results are presented.« less

Chile: Acceptability of a Training Program for Depression Management in Primary Care.

PubMed

Marín, Rigoberto; Martínez, Pablo; Cornejo, Juan P; Díaz, Berta; Peralta, José; Tala, Álvaro; Rojas, Graciela

2016-01-01

In Chile, there are inconsistencies in the management of depression in primary care settings, and the National Depression Program, currently in effect, was implemented without a standardized training program. The objective of this study is to evaluate the acceptability of a training program on the management of depression for primary care health teams. The study was a randomized controlled trial, and two primary centers from the Metropolitan Region of Santiago were randomly selected to carry out the intervention training program. Pre-post surveys were applied, to evaluate expectations and satisfaction with the intervention, respectively. Descriptive and content analysis was carried out. The sample consisted of 41 health professionals, 56.1% of who reported that their expectations for the intervention were met. All of the training activities were evaluated with scores higher than 6.4 (on a 1-7 scale). The trainers, the methodology, and the learning environment were considered strengths and facilitators of the program, while the limited duration of the training, the logistical problems faced during part of the program, and the lack of educational material were viewed as weaknesses. The intervention was well accepted by primary health care teams. However, the clinical impact in patients still has to be evaluated.

Spacecraft environmental interactions: A joint Air Force and NASA research and technology program

NASA Technical Reports Server (NTRS)

Pike, C. P.; Purvis, C. K.; Hudson, W. R.

1985-01-01

A joint Air Force/NASA comprehensive research and technology program on spacecraft environmental interactions to develop technology to control interactions between large spacecraft systems and the charged-particle environment of space is described. This technology will support NASA/Department of Defense operations of the shuttle/IUS, shuttle/Centaur, and the force application and surveillance and detection missions, planning for transatmospheric vehicles and the NASA space station, and the AFSC military space system technology model. The program consists of combined contractual and in-house efforts aimed at understanding spacecraft environmental interaction phenomena and relating results of ground-based tests to space conditions. A concerted effort is being made to identify project-related environmental interactions of concern. The basic properties of materials are being investigated to develop or modify the materials as needed. A group simulation investigation is evaluating basic plasma interaction phenomena to provide inputs to the analytical modeling investigation. Systems performance is being evaluated by both groundbased tests and analysis.

Evaluation of Project Outreach (YO-MA-CO-CO) Public Library of Youngstown and Mahoning County.

ERIC Educational Resources Information Center

Rogers, A. Robert

The goals of Project Outreach were: to place library materials in agencies throughout the county; to offer film programs, filmstrip presentations, and talks; to continue cooperative ventures in the use of braille and talking books; to continue to utilize tape cassettes; to provide materials to handicapped persons; to make available large print…

Designs for the Evaluation of Teacher Training Materials. Report No. 2.

ERIC Educational Resources Information Center

Okey, James R.; Ciesla, Jerome L.

This paper describes methods to assess the impact on students of a teacher using skills learned in a training program. Three designs for assessing the effects of teacher training materials are presented: time series design, equivalent time-samples design, and posttest-only control group design. Data obtained by classroom teachers while using the…

Evaluation of the Chemistry Collection of a Four-Year College Library by Means of Textbook Citation Analysis.

ERIC Educational Resources Information Center

Powell, Diana L.

The purpose of this study was to evaluate the chemistry collection of the College of Wooster's Chemistry Library. In particular, the extent to which the library supports the curriculum of the chemistry and biochemistry program by providing additional sources to supplement course textbooks was evaluated. Focus was on materials present in the…

Performance of Cracked and Seated Rigid Airport Pavements.

DTIC Science & Technology

1987-04-01

situ properties of the cracked PCC material and of the uncracked PCC. Additionally, a visual condition survey of the pavements under investigation was...the overall pavement evaluation effort. Results of the NDT testing program were used to determine the in-situ properties of the cracked PCC material ...combined with the NDT deflection basin slopes, led to the conclusion that the cracked and seated PCC layer is behaving as a semi-rigid material . 45 OVERLAY

Five year ground exposure of composite materials used on the Bell Model 206L flight service evaluation

NASA Technical Reports Server (NTRS)

Baker, Donald J.

1989-01-01

Part of the results of a U.S. Army/NASA-Langley sponsored research program to establish the long term-term effects of realistic ground based exposure on advanced composite materials is presented. Residual strengths and moisture absorption as a function of exposure time and exposure location are reported for four different composite material systems that were exposed for five years on the North American Continent.

Comparative results of autogenous ignition temperature measurements by ASTM G 72 and pressurized scanning calorimetry in gaseous oxygen

NASA Technical Reports Server (NTRS)

Bryan, C. J.; Lowrie, R.

1986-01-01

The autogenous ignition temperature of four materials was determined by ASTM (G 72) and pressurized differential scanning calorimetry at 0.68-, 3.4-, and 6.8-MPa oxygen pressure. All four materials were found to ignite at lower temperatures in the ASTM method. The four materials evaluated in this program were Neoprene, Vespel SP-21, Fluorel E-2160, and nylon 6/6.

Proceedings of the NASA Workshop on Atomic Oxygen Effects. [low earth orbital environment

NASA Technical Reports Server (NTRS)

Brinza, David E. (Editor)

1987-01-01

A workshop was held to address the scientific issues concerning the effects of atomic oxygen on materials in the low Earth orbital (LEO) environment. The program included 18 invited speakers plus contributed posters covering topics such as LEO spaceflight experiments, interaction mechanisms, and atomic oxygen source development. Discussion sessions were also held to organize a test program to evaluate atomic oxygen exposure facilities. The key issues raised in the workshop were: (1) the need to develop a reliable predictive model of the effects of long-term exposure of materials to the LEO environment; (2) the ability of ground-based exposure facilities to provide useful data for development of durable materials; and (3) accurate determination of the composition of the LEO environment. These proceedings include the invited papers, the abstracts for the contributed posters, and an account of the test program discussion sessions.

Advanced composites structural concepts and materials technologies for primary aircraft structures. Structural response and failure analysis: ISPAN modules users manual

NASA Technical Reports Server (NTRS)

Hairr, John W.; Huang, Jui-Ten; Ingram, J. Edward; Shah, Bharat M.

1992-01-01

The ISPAN Program (Interactive Stiffened Panel Analysis) is an interactive design tool that is intended to provide a means of performing simple and self contained preliminary analysis of aircraft primary structures made of composite materials. The program combines a series of modules with the finite element code DIAL as its backbone. Four ISPAN Modules were developed and are documented. These include: (1) flat stiffened panel; (2) curved stiffened panel; (3) flat tubular panel; and (4) curved geodesic panel. Users are instructed to input geometric and material properties, load information and types of analysis (linear, bifurcation buckling, or post-buckling) interactively. The program utilizing this information will generate finite element mesh and perform analysis. The output in the form of summary tables of stress or margins of safety, contour plots of loads or stress, and deflected shape plots may be generalized and used to evaluate specific design.

An expanded safeguards role for the DOE safeguards analytical laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bingham, C.D.

The New Brunswick Laboratory (NBL) is a Government-owned, Government-operated (GOGO) laboratory, with the mission to provide and maintain a nuclear material measurements and standards laboratory. The functional responsibilities of NBL serve as a technical response to the statutory responsibility of the Department of Energy (DOE) to assure the safeguarding of nuclear materials. In the execution of its mission, NBL carries out activities in six safeguards-related programs: measurement development, measurement evaluation, measurement services, safeguards assessment, reference and calibration materials and site-specific assistance. These program activities have been implemented by NBL for many years; their relative emphases, however, have been changed recentlymore » to address the priorities defined by the DOE Office of Safeguards and Security, Defense Programs (OSS/DP). As a consequence, NBL operations are in the ''mainstream'' of domestic safeguards activities. This expanded safeguards role for NBL is discussed in this paper.« less

New Brunswick Laboratory: Progress report, October 1993 through September 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The mission of the New Brunswick Laboratory of the US Department of Energy (DOE) is to serve as the National Certifying Authority for nuclear reference materials and to provide an independent Federal technical staff and laboratory resource performing nuclear material measurement, safeguards and non-proliferation functions in support of multiple program sponsors. During FY 94 New Brunswick Laboratory (NBL) completed development of a Strategic Plan which will aid in better defining performance oriented laboratory goals and objectives in each functional area consistent with the changing needs of the global nuclear community. This annual report describes accomplishments achieved in carrying out NBL`smore » assigned missions. Details of completed projects are reported in separate topical reports or as open-literature publications. Programs discussed here are: (1) safeguards assistance; (2) reference materials program; (3) measurement evaluation; (4) measurement services; and (5) measurement development.« less

Development and characterization of lubricants for use near nuclear reactors in space vehicles

NASA Technical Reports Server (NTRS)

Robinson, G. L.; Akawie, R. I.; Gardos, M. N.; Krening, K. C.

1972-01-01

The synthesis and evaluation program was conducted to develop wide-temperature range lubricants suitable for use in space vehicles particularly in the vicinity of nuclear reactors. Synthetic approaches resulted in nonpolymeric, large molecular weight materials, all based on some combination of siloxane and aromatic groups. Evaluation of these materials indicated that certain tetramethyl and hexamethyl disiloxanes containing phenyl thiophenyl substituents are extremely promising with respect to radiation stability, wide temperature range, good lubricity, oxidation resistance and additive acceptance. The synthesis of fluids is discussed, and the equipment and methods used in evaluation are described, some of which were designed to evaluate micro-quantities of the synthesized lubricants.

Enhanced Damage-Resistant Optics for Spaceflight Laser Systems: Workshop findings and recommendations

NASA Technical Reports Server (NTRS)

Schulze, Norman; Cimolino, Marc; Guenther, Arthur; Mcminn, Ted; Rainer, Frank; Schmid, Ansgar; Seitel, Steven C.; Soileau, M. J.; Theon, John S.; Walz, William

1991-01-01

NASA has defined a program to address critical laser-induced damage issues peculiar to its remote sensing systems. The Langley Research Center (LaRC), with input from the Goddard Space Flight Center (GSFC), has developed a program plan focusing on the certification of optical materials for spaceflight applications and the development of techniques to determine the reliability of such materials under extended laser exposures. This plan involves cooperative efforts between NASA and optics manufacturers to quantify the performance of optical materials for NASA systems and to ensure NASA's continued application of the highest quality optics possible for enhanced system reliability. A review panel was organized to assess NASA's optical damage concerns and to evaluate the effectiveness of the LaRC proposed program plan. This panel consisted of experts in the areas of laser-induced damage, optical coating manufacture, and the design and development of laser systems for space. The panel was presented information on NASA's current and planned laser remote sensing programs, laser-induced damage problems already encountered in NASA systems, and the proposed program plan to address these issues. Additionally, technical presentations were made on the state of the art in damage mechanisms, optical materials testing, and issues of coating manufacture germane to laser damage.

In preparation of the nationwide dissemination of the school-based obesity prevention program DOiT: stepwise development applying the intervention mapping protocol.

PubMed

van Nassau, Femke; Singh, Amika S; van Mechelen, Willem; Brug, Johannes; Chin A Paw, Mai J M

2014-08-01

The school-based Dutch Obesity Intervention in Teenagers (DOiT) program is an evidence-based obesity prevention program. In preparation for dissemination throughout the Netherlands, this study aimed to adapt the initial program and to develop an implementation strategy and materials. We revisited the Intervention Mapping (IM) protocol, using results of the previous process evaluation and additional focus groups and interviews with students, parents, teachers, and professionals. The adapted 2-year DOiT program consists of a classroom, an environmental and a parental component. The year 1 lessons aim to increase awareness and knowledge of healthy behaviors. The lessons in year 2 focus on the influence of the (obesogenic) environment. The stepwise development of the implementation strategy resulted in objectives that support teachers' implementation. We developed a 7-step implementation strategy and supporting materials by translating the objectives into essential elements and practical strategies. This study illustrates how revisiting the IM protocol resulted in an adapted program and tailored implementation strategy based on previous evaluations as well as input from different stakeholders. The stepwise development of DOiT can serve as an example for other evidence-based programs in preparation for wider dissemination. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

Using the RE-AIM framework to evaluate the statewide dissemination of a school-based physical activity and nutrition curriculum: "Exercise Your Options".

PubMed

Dunton, Genevieve F; Lagloire, Renee; Robertson, Trina

2009-01-01

Examine the reach, efficacy, adoption, implementation, and maintenance of a physical activity and nutrition curriculum for middle-school students. Nonexperimental pilot evaluation of a statewide dissemination trial. California middle schools during the 2006 to 2007 school year. Sixteen classes (N = 668 students and 16 teachers) sampled from the statewide pool who used the program. An eight-lesson nutrition and physical activity curriculum, "Exercise Your Options" (EYO), including a teacher guide, video clips, a student activity booklet, and ancillary materials was made available to teachers. Program records, classroom observations, teacher surveys, and student presurveys and postsurveys (assessing physical activity, sedentary behaviors, and dietary intake). Descriptive statistics and multilevel random-coefficient modeling. The EYO program reached 234,442 middle-school students in California. During the program, total physical activity increased (p < .001), whereas watching TV/DVDs and playing electronic games/computer use decreased (p < .05). Intake of dairy products increased (p < .05), whereas consumption of sugars/sweets decreased (p < .001). Forty-two percent of eligible middle-school classrooms ordered the program materials. Eighty-six percent of sampled teachers implemented all of the lessons. Over the past 5 years, 51% of all middle-school students in California were exposed to the program. The EYO program showed its potential for moderate to high public health impact among California middle-school students.

A study on the utilization of advanced composites in commercial aircraft wing structure

NASA Technical Reports Server (NTRS)

Watts, D. J.

1978-01-01

A study was conducted to define the technology and data needed to support the introduction of advanced composite materials in the wing structure of future production aircraft. The study accomplished the following: (1) definition of acceptance factors, (2) identification of technology issues, (3) evaluation of six candidate wing structures, (4) evaluation of five program options, (5) definition of a composite wing technology development plan, (6) identification of full-scale tests, (7) estimation of program costs for the total development plan, (8) forecast of future utilization of composites in commercial transport aircraft and (9) identification of critical technologies for timely program planning.

Germany's Disease Management Program: Improving Outcomes in Congestive Heart Failure

PubMed Central

Kottmair, Stefan; Frye, Christian; Ziegenhagen, Dieter J.

2005-01-01

Hospital admissions among patients with congestive heart failure (CHF) are a major contributor to health care costs. A comprehensive disease management program for CHF was developed for private and statutory health insurance companies in order to improve health outcomes and reduce rehospitalization rates and costs. The program comprises care calls, written training material, telemetric monitoring, and health reports. Currently, 909 members from six insurance companies are enrolled. Routine evaluation, based on medical data warehouse software, demonstrates benefits in terms of improved health outcomes and processes of care. Economical evaluation of claims data indicates significant cost savings in a pre/post study design. PMID:17288080

CIVIL TECHNOLOGY, HIGHWAY AND STRUCTURAL OPTIONS, A SUGGESTED 2-YEAR POST HIGH SCHOOL CURRICULUM. TECHNICAL EDUCATION PROGRAM SERIES, NUMBER 8.

ERIC Educational Resources Information Center

BEAUMONT, JOHN A; AND OTHERS

DESIGNED TO ASSIST ADMINISTRATORS, SUPERVISORS, AND TEACHERS TO PLAN, DEVELOP, AND EVALUATE PROGRAMS, THIS CURRICULUM GUIDE OFFERS COURSE OUTLINES, PROCEDURES, LABORATORY LAYOUTS, TEXTS AND REFERENCES, LISTS OF LABORATORY EQUIPMENT AND ITS COST, AND A SELECTED LIST OF SCIENTIFIC AND TECHNICAL SOCIETIES. BASIC MATERIALS WERE PREPARED AT THE…

Supporting Data Amended FY 1992/FY 1993 Biennial Budget Estimate Submitted to Congress - January 1992. Descriptive Summaries of the Research, Development, Test and Evaluation, Army Appropriation

DTIC Science & Technology

1992-01-01

dessert and snack items to increase acceptability and 31$,) UNCLASSIFIED UNCLASSIFIED AMENDED FY 1992/1993 BIENNIAL RDTE DESCRIPTIVE SUMMARY Program...Planned Program: " (U) Finalize development of non-organic and non-polluting processing bids for extruded and molded energetic materials * (U

Evaluating Different Standard-Setting Methods in an ESL Placement Testing Context

ERIC Educational Resources Information Center

Shin, Sun-Young; Lidster, Ryan

2017-01-01

In language programs, it is crucial to place incoming students into appropriate levels to ensure that course curriculum and materials are well targeted to their learning needs. Deciding how and where to set cutscores on placement tests is thus of central importance to programs, but previous studies in educational measurement disagree as to which…

An Interactive Videodisc Program To Evaluate and Train Job-Related Math Skills for Transition. Final Report.

ERIC Educational Resources Information Center

Harris, Carolyn DeMeyer; And Others

The project designed and developed a videodisc package that provides both assessment and related instruction programs for job-related mathematics problem solving, using simulations to provide direct access to vocational situations. The materials are intended to meet the needs of youth and young adults with mild mental handicaps in transition from…

An Evaluation of the Mississippi Recipes for Success Program from the Perspective of Child Nutrition Directors

ERIC Educational Resources Information Center

Bell, Chelsea; Lambert, Laurel; Chang, Yunhee; Carithers, Teresa

2017-01-01

Purpose/Objectives: The Mississippi Recipes for Success (MRS), a customizable selective menu system resource, was developed for child nutrition program (CNP) directors to comply with USDA nutrition regulations. The resource is available in printed and online formats and includes recipes, menu matrixes, food safety, and training materials for meal…

Citizenship Education Software: A Selective, Annotated Bibliography of Microcomputer Programs for the Social Studies.

ERIC Educational Resources Information Center

White, Charles S.

1983-01-01

Software listed was evaluated on the basis of content relevance, variety of instructional strategies, exemplary use of computer for instruction, factual accuracy, evidence of skillful programing, and general "user friendliness." Compatibility with an Apple II+, 48K, was required. Materials for use in grades three through the college level are…

PROGRAMED LEARNING--A COMPARATIVE EVALUATION OF STUDENT PERFORMANCE VARIABLES UNDER COMBINATIONS OF CONVENTIONAL AND AUTOMATED INSTRUCTION.

ERIC Educational Resources Information Center

FLINT, LANNING L.; HATCH, RICHARD S.

STUDENT PERFORMANCE VARIABLES UNDER AUTOMATED, CONVENTIONAL, AND A COMBINATION OF AUTOMATED AND CONVENTIONAL CONDITIONS OF INSTRUCTION WERE INVESTIGATED. RECOMMENDATIONS FOR THE INTEGRATION OF PROGRAMED MATERIAL INTO THE CLASSROOM WERE SOUGHT. THREE GROUPS OF JUNIOR COLLEGE STUDENTS WERE USED IN THE EXPERIMENT. THE GROUPS WERE CHOSEN AT RANDOM.…

An Evaluation of the General Educational Development Program at Seminole Community College, Sanford, Florida.

ERIC Educational Resources Information Center

Mize, Joanne Page

In order to gather current data about the General Educational Development (GED) program at Seminole Community College (SCC), Florida, a random sample of 1982 GED examinees were surveyed to determine the examinees' assessment of the quality of instruction, course materials, and learning laboratories at SCC; the center(s) used most often and for…

Evaluation of liners for a uranium-mill tailings disposal site: a status report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buelt, J.L.; Hale, V.Q.; Barnes, S.M.

1981-05-01

The United States Department of Energy is conducting a program designed to reclaim or stabilize inactive uranium-mill tailings sites. This report presents the status of the Liner Evaluation Program. The purpose of the study was to identify eight prospective lining materials or composites for laboratory testing. The evaluation was performed by 1) reviewing proposed regulatory requirements to define the material performance criteria; 2) reviewing published literature and communicating with industrial and government experts experienced with lining materials and techniques; and 3) characterizing the tailings at three of the sites for calcium concentration, a selection of anions, radionuclides, organic solvents, andmore » acidity levels. The eight materials selected for laboratory testing are: natural soil amended with sodium-saturated montmorillonite (Volclay); locally available clay in conjunction with an asphalt emulsion radon suppression cover; locally available clay in conjunction with a multibarrier radon suppression cover; rubberized asphalt membrane; hydraulic asphalt concrete; chlorosulfonated polyethylene (hypalon) or high-density polyethylene; bentonite, sand and gravel mixture; and catalytic airblown asphalt membrane. The materials will be exposed in test units now being constructed to conditions such as wet/dry cycles, temperature cycles, oxidative environments, ion-exchange elements, etc. The results of the tests will identify the best material for field study. The status report also presents the information gathered during the field studies at Grand Junction, Colorado. Two liners, a bentonite, sand and gravel mixture, and a catalytic airblown asphalt membrane, were installed in a prepared trench and covered with tailings. The liners were instrumented and are being monitored for migration of moisture, radionuclides, and hazardous chemicals. The two liner materials will also be subjected to accelerated laboratory tests for a comparative assessment.« less

Numerical Approximation of Elasticity Tensor Associated With Green-Naghdi Rate.

PubMed

Liu, Haofei; Sun, Wei

2017-08-01

Objective stress rates are often used in commercial finite element (FE) programs. However, deriving a consistent tangent modulus tensor (also known as elasticity tensor or material Jacobian) associated with the objective stress rates is challenging when complex material models are utilized. In this paper, an approximation method for the tangent modulus tensor associated with the Green-Naghdi rate of the Kirchhoff stress is employed to simplify the evaluation process. The effectiveness of the approach is demonstrated through the implementation of two user-defined fiber-reinforced hyperelastic material models. Comparisons between the approximation method and the closed-form analytical method demonstrate that the former can simplify the material Jacobian evaluation with satisfactory accuracy while retaining its computational efficiency. Moreover, since the approximation method is independent of material models, it can facilitate the implementation of complex material models in FE analysis using shell/membrane elements in abaqus.

Development and analysis of insulation constructions for aerospace wiring applications

NASA Astrophysics Data System (ADS)

Slenski, George A.; Woodford, Lynn M.

1993-03-01

The Wright Laboratory Materials Directorate at WPAFB, Ohio recently completed a research and development program under contract with the McDonnell Douglas Aerospace Company, St. Louis, Missouri. Program objectives were to develop wire insulation performance requirements, evaluate candidate insulations, and prepare preliminary specification sheets on the most promising candidates. Aircraft wiring continues to be a high maintenance item and a major contributor to electrically-related aircraft mishaps. Mishap data on aircraft show that chafing of insulation is the most common mode of wire failure. Improved wiring constructions are expected to increase aircraft performance and decrease costs by reducing maintenance actions. In the laboratory program, new insulation constructions were identified that had overall improved performance in evaluation tests when compared to currently available MIL-W-81381 and MIL-W-22759 wiring. These insulations are principally aromatic polyimide and crosslinked ethylene tetrafluoroethylene (ETFE), respectively. Candidate insulations identified in preliminary specification sheets were principally fluoropolymers with a polyimide inner layer. Examples of insulation properties evaluated included flammability, high temperature mechanical and electrical performance, fluid immersion, and susceptibility to arc propagation under applied power chafing conditions. Potential next generation wire insulation materials are also reviewed.

A statewide nurse training program for a hospital based infant abusive head trauma prevention program.

PubMed

Nocera, Maryalice; Shanahan, Meghan; Murphy, Robert A; Sullivan, Kelly M; Barr, Marilyn; Price, Julie; Zolotor, Adam

2016-01-01

Successful implementation of universal patient education programs requires training large numbers of nursing staff in new content and procedures and maintaining fidelity to program standards. In preparation for statewide adoption of a hospital based universal education program, nursing staff at 85 hospitals and 1 birthing center in North Carolina received standardized training. This article describes the training program and reports findings from the process, outcome and impact evaluations of this training. Evaluation strategies were designed to query nurse satisfaction with training and course content; determine if training conveyed new information, and assess if nurses applied lessons from the training sessions to deliver the program as designed. Trainings were conducted during April 2008-February 2010. Evaluations were received from 4358 attendees. Information was obtained about training type, participants' perceptions of newness and usefulness of information and how the program compared to other education materials. Program fidelity data were collected using telephone surveys about compliance to delivery of teaching points and teaching behaviors. Results demonstrate high levels of satisfaction and perceptions of program utility as well as adherence to program model. These findings support the feasibility of implementing a universal patient education programs with strong uptake utilizing large scale systematic training programs. Copyright © 2015 Elsevier Ltd. All rights reserved.

Improving public health evaluation: a qualitative investigation of practitioners' needs.

PubMed

Denford, Sarah; Lakshman, Rajalakshmi; Callaghan, Margaret; Abraham, Charles

2018-01-30

In 2011, the House of Lords published a report on Behaviour Change, in which they report that "a lot more could, and should, be done to improve the evaluation of interventions." This study aimed to undertake a needs assessment of what kind of evaluation training and materials would be of most use to UK public health practitioners by conducting interviews with practitioners about everyday evaluation practice and needed guidance and materials. Semi-structured interviews were conducted with 32 public health practitioners in two UK regions, Cambridgeshire and the South West. Participants included directors of public health, consultants in public health, health improvement advisors, public health intelligence, and public health research officers. A topic guide included questions designed to explore participants existing evaluation practice and their needs for further training and guidance. Data were analysed using thematic analyses. Practitioners highlighted the need for evaluation to defend the effectiveness of existing programs and protect funding provisions. However, practitioners often lacked training in evaluation, and felt unqualified to perform such a task. The majority of practitioners did not use, or were not aware of many existing evaluation guidance documents. They wanted quality-assured, practical guidance that relate to the real world settings in which they operate. Practitioners also mentioned the need for better links and support from academics in public health. Whilst numerous guidance documents supporting public health evaluation exist, these documents are currently underused by practitioners - either because they are not considered useful, or because practitioners are not aware of them. Integrating existing guides into a catalogue of guidance documents, and developing a new-quality assured, practical and useful document may support the evaluation of public health programs. This in turn has the potential to identify those programs that are effective; thus improving public health and reducing financial waste.

Ceramics Analysis and Reliability Evaluation of Structures (CARES). Users and programmers manual

NASA Technical Reports Server (NTRS)

Nemeth, Noel N.; Manderscheid, Jane M.; Gyekenyesi, John P.

1990-01-01

This manual describes how to use the Ceramics Analysis and Reliability Evaluation of Structures (CARES) computer program. The primary function of the code is to calculate the fast fracture reliability or failure probability of macroscopically isotropic ceramic components. These components may be subjected to complex thermomechanical loadings, such as those found in heat engine applications. The program uses results from MSC/NASTRAN or ANSYS finite element analysis programs to evaluate component reliability due to inherent surface and/or volume type flaws. CARES utilizes the Batdorf model and the two-parameter Weibull cumulative distribution function to describe the effect of multiaxial stress states on material strength. The principle of independent action (PIA) and the Weibull normal stress averaging models are also included. Weibull material strength parameters, the Batdorf crack density coefficient, and other related statistical quantities are estimated from four-point bend bar or unifrom uniaxial tensile specimen fracture strength data. Parameter estimation can be performed for single or multiple failure modes by using the least-square analysis or the maximum likelihood method. Kolmogorov-Smirnov and Anderson-Darling goodness-of-fit tests, ninety percent confidence intervals on the Weibull parameters, and Kanofsky-Srinivasan ninety percent confidence band values are also provided. The probabilistic fast-fracture theories used in CARES, along with the input and output for CARES, are described. Example problems to demonstrate various feature of the program are also included. This manual describes the MSC/NASTRAN version of the CARES program.

An Evaluation of Grazing-Incidence Optics for Neutron Imaging

NASA Technical Reports Server (NTRS)

Gubarev, M. V.

2007-01-01

The refractive index for most materials is slightly less than unity, which opens an opportunity to develop the grazing incidence neutron imaging optics. The ideal material for the optics would be natural nickel and its isotopes. Marshall Space Flight Center (MSFC) has active development program on the nickel replicated optics for use in x-ray astronomy. Brief status report on the program is presented. The results of the neutron focusing optic test carried by the MSFC team at National Institute of Standards and Technology (NIST) are also presented. Possible applications of the optics are briefly discussed.

Recent Accomplishments and Future Directions in US Fusion Safety & Environmental Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

David A. Petti; Brad J. Merrill; Phillip Sharpe

2006-07-01

The US fusion program has long recognized that the safety and environmental (S&E) potential of fusion can be attained by prudent materials selection, judicious design choices, and integration of safety requirements into the design of the facility. To achieve this goal, S&E research is focused on understanding the behavior of the largest sources of radioactive and hazardous materials in a fusion facility, understanding how energy sources in a fusion facility could mobilize those materials, developing integrated state of the art S&E computer codes and risk tools for safety assessment, and evaluating S&E issues associated with current fusion designs. In thismore » paper, recent accomplishments are reviewed and future directions outlined.« less

Real-time and accelerated outdoor endurance testing of solar cells

NASA Technical Reports Server (NTRS)

Forestieri, A. F.; Anagnostou, E.

1977-01-01

Real-time and accelerated outdoor endurance testing was performed on a variety of samples of interest to the National Photovoltaic Conversion Program. The real-time tests were performed at seven different sites and the accelerated tests were performed at one of those sites in the southwestern United States. The purpose of the tests were to help evaluate the lifetime of photovoltaic systems. Three types of samples were tested; transmission samples of possible cover materials, sub-modules constructed using these materials attached to solar cells, and solar cell modules produced by the manufacturers for the ERDA program. Results indicate that suitable cover materials are glass, FEP-A and PFA. Dirt accumulation and cleanability are important factors in the selection of solar cell module covers and encapsulants.

Impacts: NIST Building and Fire Research Laboratory (technical and societal)

NASA Astrophysics Data System (ADS)

Raufaste, N. J.

1993-08-01

The Building and Fire Research Laboratory (BFRL) of the National Institute of Standards and Technology (NIST) is dedicated to the life cycle quality of constructed facilities. The report describes major effects of BFRL's program on building and fire research. Contents of the document include: structural reliability; nondestructive testing of concrete; structural failure investigations; seismic design and construction standards; rehabilitation codes and standards; alternative refrigerants research; HVAC simulation models; thermal insulation; residential equipment energy efficiency; residential plumbing standards; computer image evaluation of building materials; corrosion-protection for reinforcing steel; prediction of the service lives of building materials; quality of construction materials laboratory testing; roofing standards; simulating fires with computers; fire safety evaluation system; fire investigations; soot formation and evolution; cone calorimeter development; smoke detector standards; standard for the flammability of children's sleepwear; smoldering insulation fires; wood heating safety research; in-place testing of concrete; communication protocols for building automation and control systems; computer simulation of the properties of concrete and other porous materials; cigarette-induced furniture fires; carbon monoxide formation in enclosure fires; halon alternative fire extinguishing agents; turbulent mixing research; materials fire research; furniture flammability testing; standard for the cigarette ignition resistance of mattresses; support of navy firefighter trainer program; and using fire to clean up oil spills.

Testing and Comparative Evaluation of Space Shuttle Main Engine Flowmeter Bearings

NASA Technical Reports Server (NTRS)

Hissam, Andy; Leberman, Mike; McLeroy, Rick

2005-01-01

This paper provides a summary of testing of Space Shuttle Main Engine (SSME) flowmeter bearings and cage material. These tests were con&cM over a several month period in 2004 at the Marshall Space Flight Center. The test program's primary objective was to compare the performance of bearings using the existing cage material and bearings using a proposed replacement cage material. In order to meet the test objectives for this program, a flowmeter test rig was designed and fabricated to measure both breakaway and running torque for a flowmeter assembly. Other test parameters,,such as motor current and shaft speed, were also recorded and provide a means of comparing bearing performance. The flowmeter and bearings were tested in liquid hydrogen to simulate the flowmeter's operating environment as closely as possible. Based on the results from this testing, the bearings with the existing cage material are equivalent to the bearings with the proposed replacement cage material. No major differences exist between the old and new cage materials. Therefore, the new cage material is a suitable replacement for the existing cage material.

Furniture rough mill costs evaluated by computer simulation

Treesearch

R. Bruce Anderson

1983-01-01

A crosscut-first furniture rough mill was simulated to evaluate processing and raw material costs on an individual part basis. Distributions representing the real-world characteristics of lumber, equipment feed speeds, and processing requirements are programed into the simulation. Costs of parts from a specific cutting bill are given, and effects of lumber input costs...

Adapting Science Materials for the Blind, Report of an Evaluation Planning Conference.

ERIC Educational Resources Information Center

Thier, Herbert D.; And Others

Persons from the field of science education and persons who had extensive experience working with visually handicapped children were brought together to establish some baselines and beginning ideas of approaches to the evaluation of a laboratory - centered science program (Science Curriculum Improvement Study) as it is being used with visually…

Videodisc Evaluation Report. "The Teddy Bears Disc."

ERIC Educational Resources Information Center

Laurillard, D. M.

This study evaluated the design and effectiveness of an interactive videodisc package which was developed at the Open University for a second level course in metallurgy and materials technology. Based on an existing 25-minute television program from the course, the disk put the problem in the form of a court case assessing the responsibility for…

Year 1 Evaluation of Nebraska's Statewide Plan: Connecting Schools to the Internet.

ERIC Educational Resources Information Center

Topp, Neal W.; Grandgenett, Neal

1996-01-01

Reviews activities in the first year of a Nebraska plan to connect K-12 schools to the Internet, including: installing UNIX-based computers; developing a statewide training program; hiring; distributing support materials; and devising a formative evaluation process. Trends in teacher and student Internet use and eight projects in classroom…

Ada training evaluation and recommendations from the Gamma Ray Observatory Ada Development Team

NASA Technical Reports Server (NTRS)

1985-01-01

The Ada training experiences of the Gamma Ray Observatory Ada development team are related, and recommendations are made concerning future Ada training for software developers. Training methods are evaluated, deficiencies in the training program are noted, and a recommended approach, including course outline, time allocation, and reference materials, is offered.

76 FR 24060 - Proposed Extension of Existing Information Collection; Testing, Evaluation, and Approval of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-29

... Extension of Existing Information Collection; Testing, Evaluation, and Approval of Mining Products AGENCY... Reduction Act of 1995 [44 U.S.C. 3506(c)(2)(A)]. This program helps to ensure that requested data can be..., testing, approval and certification, and quality control of mining equipment and components, materials...

The Impact of Light Pollution Education through a Global Star-Hunting Campaign and Classroom Curricu

NASA Astrophysics Data System (ADS)

Walker, C. E.; Buxner, S.; Pompea, S. M.

2012-12-01

The emphasis of the international citizen-science, star-hunting campaign, GLOBE at Night, and its accompanying Dark Skies Rangers activities is to increase public awareness on issues of light pollution. An on-line evaluation survey was administered to 585 people who participated in a GLOBE at Night and/or Dark Skies Rangers workshop and had received a Dark Skies Education Kit over the last 5 years. The survey was conducted to help improve the dark sky education programs and was administered and assessed by an external evaluator. Results will be presented on the usefulness of the programs, workshops and associated materials (e.g., the Dark Skies Rangers activities, materials, kit). Results will also include the evaluation of the GLOBE at Night campaigns, the use of these resources in the classroom, and the educators' impressions of student learning outcomes. Session participants will: 1) Learn about ongoing efforts to evaluate a large citizen science project; 2) Learn about usefulness of Dark Sky products for a variety of educational providers; 3) Learn how to apply the presented techniques to their own outreach activities.

Science Notes.

ERIC Educational Resources Information Center

School Science Review, 1985

1985-01-01

Presents 23 experiments, activities, field projects and computer programs in the biological and physical sciences. Instructional procedures, experimental designs, materials, and background information are suggested. Topics include fluid mechanics, electricity, crystals, arthropods, limpets, acid neutralization, and software evaluation. (ML)

Chemistry Notes.

ERIC Educational Resources Information Center

School Science Review, 1983

1983-01-01

Presents background information, laboratory procedures, classroom materials/activities, and chemistry experiments. Topics include sublimation, electronegativity, electrolysis, experimental aspects of strontianite, halide test, evaluation of present and future computer programs in chemistry, formula building, care of glass/saturated calomel…

Woven TPS Mechanical Property Evaluation

NASA Technical Reports Server (NTRS)

Gonzales, Gregory Lewis; Kao, David Jan-Woei; Stackpoole, Margaret M.

2013-01-01

Woven Thermal Protection Systems (WTPS) is a relatively new program funded by the Office of the Chief Technologist (OCT). The WTPS approach to producing TPS architectures uses precisely engineered 3-D weaving techniques that allow tailoring material characteristics needed to meet specific mission requirements. A series of mechanical tests were performed to evaluate performance of different weave types, and get a better understanding of failure modes expected in these three-dimensional architectures. These properties will aid in material down selection and guide selection of the appropriate WTPS for a potential mission.

Design and evaluation of the ONC health information technology curriculum

PubMed Central

Mohan, Vishnu; Abbott, Patricia; Acteson, Shelby; Berner, Eta S; Devlin, Corkey; Hammond, William E; Kukafka, Rita; Hersh, William

2014-01-01

Objective As part of the Heath Information Technology for Economic and Clinical Health (HITECH) Act, the Office of the National Coordinator for Health Information Technology (ONC) implemented its Workforce Development Program, which included initiatives to train health information technology (HIT) professionals in 12 workforce roles, half of them in community colleges. To achieve this, the ONC tasked five universities with established informatics programs with creating curricular materials that could be used by community colleges. The five universities created 20 components that were made available for downloading from the National Training and Dissemination Center (NTDC) website. This paper describes an evaluation of the curricular materials by its intended audience of educators. Methods We measured the quantity of downloads from the NTDC site and administered a survey about the curricular materials to its registered users to determine use patterns and user characteristics. The survey was evaluated using mixed methods. Registered users downloaded nearly half a million units or components from the NTDC website. We surveyed these 9835 registered users. Results 1269 individuals completed all or part of the survey, of whom 339 identified themselves as educators (26.7% of all respondents). This paper addresses the survey responses of educators. Discussion Successful aspects of the curriculum included its breadth, convenience, hands-on and course planning capabilities. Several areas were identified for potential improvement. Conclusions The ONC HIT curriculum met its goals for community college programs and will likely continue to be a valuable resource for the larger informatics community in the future. PMID:23831832

Design and evaluation of the ONC health information technology curriculum.

PubMed

Mohan, Vishnu; Abbott, Patricia; Acteson, Shelby; Berner, Eta S; Devlin, Corkey; Hammond, William E; Kukafka, Rita; Hersh, William

2014-01-01

As part of the Heath Information Technology for Economic and Clinical Health (HITECH) Act, the Office of the National Coordinator for Health Information Technology (ONC) implemented its Workforce Development Program, which included initiatives to train health information technology (HIT) professionals in 12 workforce roles, half of them in community colleges. To achieve this, the ONC tasked five universities with established informatics programs with creating curricular materials that could be used by community colleges. The five universities created 20 components that were made available for downloading from the National Training and Dissemination Center (NTDC) website. This paper describes an evaluation of the curricular materials by its intended audience of educators. We measured the quantity of downloads from the NTDC site and administered a survey about the curricular materials to its registered users to determine use patterns and user characteristics. The survey was evaluated using mixed methods. Registered users downloaded nearly half a million units or components from the NTDC website. We surveyed these 9835 registered users. 1269 individuals completed all or part of the survey, of whom 339 identified themselves as educators (26.7% of all respondents). This paper addresses the survey responses of educators. Successful aspects of the curriculum included its breadth, convenience, hands-on and course planning capabilities. Several areas were identified for potential improvement. The ONC HIT curriculum met its goals for community college programs and will likely continue to be a valuable resource for the larger informatics community in the future.

Application of the Intervention Mapping Framework to Develop an Integrated Twenty-first Century Core Curriculum—Part Three: Curriculum Implementation and Evaluation

PubMed Central

Corvin, Jaime A.; DeBate, Rita; Wolfe-Quintero, Kate; Petersen, Donna J.

2017-01-01

Public health professionals have been challenged to radically reform public health training to meet evolving demands of twenty-first century public health. Such a transformation requires a systems thinking approach with an interdisciplinary focus on problem solving, leadership, management and teamwork, technology and information, budgeting and finance, and communication. This article presents processes for implementing and evaluating a revised public health curriculum and outlines lessons learned from this initiative. To date, more than 200 students have participated in the initial pilot testing of this program. A rigorous process and outcome evaluation plan was developed and employed. Results from the evaluation were used to enhance the resulting curriculum. Specifically, all instructional materials were evaluated by both the students who received the materials and the faculty who presented the materials. As each successive pilot is delivered, both enrollment and faculty involvement has increased. Through this process, the value of committed faculty, the importance of engaging learners in the evaluation of an education program, and the need to implement curriculum that has been carefully evaluated and evidence-informed in nature has emerged. We credit our successful transformation of the Masters in Public Health core to the challenge provided by the Framing the Future task force, the commitment of our College of Public Health leadership, the engagement of our faculty, and the time we allowed for the process to unfold. Ultimately, we believe this transformed curriculum will result in better trained public health professionals, interdisciplinary practitioners who can see public health challenges in new and different ways. PMID:29164093

Application of the Intervention Mapping Framework to Develop an Integrated Twenty-first Century Core Curriculum-Part Three: Curriculum Implementation and Evaluation.

PubMed

Corvin, Jaime A; DeBate, Rita; Wolfe-Quintero, Kate; Petersen, Donna J

2017-01-01

Public health professionals have been challenged to radically reform public health training to meet evolving demands of twenty-first century public health. Such a transformation requires a systems thinking approach with an interdisciplinary focus on problem solving, leadership, management and teamwork, technology and information, budgeting and finance, and communication. This article presents processes for implementing and evaluating a revised public health curriculum and outlines lessons learned from this initiative. To date, more than 200 students have participated in the initial pilot testing of this program. A rigorous process and outcome evaluation plan was developed and employed. Results from the evaluation were used to enhance the resulting curriculum. Specifically, all instructional materials were evaluated by both the students who received the materials and the faculty who presented the materials. As each successive pilot is delivered, both enrollment and faculty involvement has increased. Through this process, the value of committed faculty, the importance of engaging learners in the evaluation of an education program, and the need to implement curriculum that has been carefully evaluated and evidence-informed in nature has emerged. We credit our successful transformation of the Masters in Public Health core to the challenge provided by the Framing the Future task force, the commitment of our College of Public Health leadership, the engagement of our faculty, and the time we allowed for the process to unfold. Ultimately, we believe this transformed curriculum will result in better trained public health professionals, interdisciplinary practitioners who can see public health challenges in new and different ways.

Process Evaluation of Baltimore Healthy Stores: A Pilot Health Intervention Program With Supermarkets and Corner Stores in Baltimore City

PubMed Central

Gittelsohn, Joel; Suratkar, Sonali; Song, Hee-Jung; Sacher, Suzanne; Rajan, Radha; Rasooly, Irit R.; Bednarek, Erin; Sharma, Sangita; Anliker, Jean A.

2011-01-01

Reduced access to affordable healthy foods is linked to higher rates of chronic diseases in low-income urban settings. The authors conduct a feasibility study of an environmental intervention (Baltimore Healthy Stores) in seven corner stores owned by Korean Americans and two supermarkets in low-income East Baltimore. The goal is to increase the availability of healthy food options and to promote them at the point of purchase. The process evaluation is conducted largely by external evaluators. Participating stores stock promoted foods, and print materials are displayed with moderate to high fidelity. Interactive consumer taste tests are implemented with high reach and dose. Materials developed specifically for Korean American corner store owners are implemented with moderate to high fidelity and dose. Results indicate that small food store–based intervention programs are feasible to implement and are a viable means of increasing healthy food availability and a good location for point-of-purchase promotions in low-income urban settings. PMID:19144859

Flight service evaluation of composite helicopter components

NASA Technical Reports Server (NTRS)

Mardoian, George H.; Ezzo, Maureen B.

1994-01-01

This paper presents the results of a NASA funded contract and Sikorsky research and development programs to evaluate structural composite components in flight service on Sikorsky Model S-76 helicopters. Selected components were removed and tested at prescribed intervals over a nine year time frame. Four horizontal stabilizers and thirteen tail rotor spars were returned from commercial service in West Palm Beach, Florida and in the Gulf Coast region of Louisiana to determine the long term effects of operations in hot and humid climates on component performance. Concurrent with the flight component evaluation, panels of materials used in their fabrication were exposed to the environment in ground racks. Selected panels were tested annually to determine the effects of exposure on physical and mechanical properties. The results of 55,741 component flight hours and 911 months of field exposure are reported and compared with initial Federal Aviation Administration (FAA) certification data. The findings of this program have provided increased confidence in the long term durability of advanced composite materials used in helicopter structural applications.

Evaluation of dispersion strengthened nickel-base alloy heat shields for space shuttle application

NASA Technical Reports Server (NTRS)

Johnson, R., Jr.; Killpatrick, D. H.

1976-01-01

The results obtained in a program to evaluate dispersion-strengthened nickel-base alloys for use in a metallic radiative thermal protection system operating at surface temperatures to 1477 K for the space shuttle were presented. Vehicle environments having critical effects on the thermal protection system are defined; TD Ni-20Cr characteristics of material used in the current study are compared with previous results; cyclic load, temperature, and pressure effects on sheet material residual strength are investigated; the effects of braze reinforcement in improving the efficiency of spotwelded joints are evaluated; parametric studies of metallic radiative thermal protection systems are reported; and the design, instrumentation, and testing of full scale subsize heat shield panels in two configurations are described. Initial tests of full scale subsize panels included simulated meteoroid impact tests, simulated entry flight aerodynamic heating, programmed differential pressure loads and temperatures simulating mission conditions, and acoustic tests simulating sound levels experienced during boost flight.

Implementation of the Hammersmith Infant Neurological Exam in a High-Risk Infant Follow-Up Program

PubMed Central

Maitre, Nathalie L; Chorna, Olena; Romeo, Domenico M; Guzzetta, Andrea

2017-01-01

Background High-Risk Infant Follow-Up (HRIF) programs provide early identification and referral for treatment of neurodevelopmental delays and impairments. In these programs, a standardized neurological exam is a critical component of evaluation for clinical and research purposes. Implementation To address primary challenges of provider educational diversity and standardized documentation, we designed an approach to training and implementation of the Hammersmith Infant Neurological Exam (HINE) with pre-course materials, a workshop model and adaptation of the electronic medical record. Conclusions Provider completion and documentation of a neurologic exam were evaluated before and after HINE training. Standardized training and implementation of the HINE in a large HRIF is feasible and effective and allows for quantitative evaluation of neurological findings and developmental trajectories. PMID:27765470

Reliability analysis of laminated CMC components through shell subelement techniques

NASA Technical Reports Server (NTRS)

Starlinger, Alois; Duffy, Stephen F.; Gyekenyesi, John P.

1992-01-01

An updated version of the integrated design program Composite Ceramics Analysis and Reliability Evaluation of Structures (C/CARES) was developed for the reliability evaluation of ceramic matrix composites (CMC) laminated shell components. The algorithm is now split into two modules: a finite-element data interface program and a reliability evaluation algorithm. More flexibility is achieved, allowing for easy implementation with various finite-element programs. The interface program creates a neutral data base which is then read by the reliability module. This neutral data base concept allows easy data transfer between different computer systems. The new interface program from the finite-element code Matrix Automated Reduction and Coupling (MARC) also includes the option of using hybrid laminates (a combination of plies of different materials or different layups) and allows for variations in temperature fields throughout the component. In the current version of C/CARES, a subelement technique was implemented, enabling stress gradients within an element to be taken into account. The noninteractive reliability function is now evaluated at each Gaussian integration point instead of using averaging techniques. As a result of the increased number of stress evaluation points, considerable improvements in the accuracy of reliability analyses were realized.

Structural Technology Evaluation and Analysis Program (STEAP). Delivery Order 0046: Multiscale Modeling of Composite Structures Subjected to Cyclic Loading

DTIC Science & Technology

2012-09-01

on transformation field analysis [19], proper orthogonal decomposition [63], eigenstrains [23], and others [1, 29, 39] have brought significant...commercial finite element software (Abaqus) along with the user material subroutine utility ( UMAT ) is employed to solve these problems. In this section...Symmetric Coefficients TFA: Transformation Field Analysis UMAT : User Material Subroutine

Computational Proficiency and Algorithmic Learning of Sixth-Graders Using DMP Materials: A Formative Evaluation. Technical Report No. 401.

ERIC Educational Resources Information Center

Wiles, Clyde

Two questions were investigated in this study: (1) How did the computational proficiency of sixth graders who had one year's experience with Developing Mathematical Processes (DMP) materials compare with an equivalent group of students who used the usual textbook program; and (2) What occurs when sixth graders study algorithms as sequences of rule…

The Effectiveness of Interactive Computer Assisted Modeling in Teaching Study Strategies and Concept Mapping of College Textbook Material.

ERIC Educational Resources Information Center

Mikulecky, Larry

A study evaluated the effectiveness of a series of print materials and interactive computer-guided study programs designed to lead undergraduate students to apply basic textbook reading and concept mapping strategies to the study of science and social science textbooks. Following field testing with 25 learning skills students, 50 freshman biology…

Commutability of control materials for external quality assessment of serum apolipoprotein A-I measurement.

PubMed

Zeng, Jie; Qi, Tianqi; Wang, Shu; Zhang, Tianjiao; Zhou, Weiyan; Zhao, Haijian; Ma, Rong; Zhang, Jiangtao; Yan, Ying; Dong, Jun; Zhang, Chuanbao; Chen, Wenxiang

2018-04-25

The aim of the current study was to evaluate the commutability of commercial control materials and human serum pools and to investigate the suitability of the materials for the external quality assessment (EQA) of serum apolipoprotein A-I (apo A-I) measurement. The Clinical and Laboratory Standards Institute (CLSI) EP14-A3 protocol was used for the commutability study. Apo A-I concentrations in two levels of commercial control materials used in EQA program, two fresh-frozen human serum pools (FSPs) and two frozen human serum pools prepared from residual clinical specimens (RSPs) were measured along with 50 individual samples using nine commercial assays. Measurement results of the 50 individual samples obtained with different assays were pairwise analyzed by Deming regression, and 95% prediction intervals (PIs) were calculated. The commutability of the processed materials was evaluated by comparing the measurement results of the materials with the limits of the PIs. The FSP-1 was commutable for all the 36 assay pairs, and FSP-2 was commutable for 30 pairs; RSP-1 and RSP-2 showed commutability for 27/36 and 22/36 assay pairs, respectively, whereas the two EQA materials were commutable only for 4/36 and 5/36 assay pairs, respectively. Non-commutability of the tested EQA materials has been observed among current apo A-I assays. EQA programs need either to take into account the commutability-related biases in the interpretation of the EQA results or to use more commutable materials. Frozen human serum pools were commutable for most of the assays.

Arc Jet Testing of Carbon Phenolic for Mars Sample Return and Future NASA Missions

NASA Technical Reports Server (NTRS)

Laub, Bernard; Chen, Yih-Kanq; Skokova, Kristina; Delano, Chad

2004-01-01

The objective of the Mars Sample Return (MSR) Mission is to return a sample of MArtian soil to Earth. The Earth Entry Vehicle (EEV) brings te samples through the atmosphere to the ground.The program aims to: Model aerothermal environment during EEV flight; On the basis of results, select potential TPS materials for EEV forebody; Fabricate TPS materials; Test the materials in the arc jet environment representative of predicted flight environment;Evaluate material performance; Compare results of modeling predictions with test results.

Basic Psychiatric Literature: II. Articles and Article Sources*†

PubMed Central

Woods, Joan B.; Pieper, Sam; Frazier, Shervert H.

1968-01-01

Widely varying reading lists for general psychiatry residents were obtained from 140 three-year approved training programs. The material recommended for reading was listed on index cards, and the number of programs recommending each item was posted on the cards. Approximately 4,000 articles, 2,800 books, and 200 serials were recommended. A statistical evaluation of the book list appeared in a previous paper (3).* Part II is a similar evaluation of the article list and the limited editions and serials in which the articles appear. PMID:4883158

Parental perception on the efficacy of a physical activity program for preschoolers.

PubMed

Bellows, Laura; Silvernail, Sara; Caldwell, Lisa; Bryant, Angela; Kennedy, Cathy; Davies, Patricia; Anderson, Jennifer

2011-04-01

Childhood obesity is among the leading health concerns in the United States. The relationship between unmet physical activity needs in young children is of particular interest as the trend in childhood obesity continues to rise and unmet physical activity needs are identified. The preschool years are an influential time in promoting healthful lifestyle habits and early childhood interventions may help establish lifelong healthful behaviors which could help prevent obesity later in life. The Food Friends®: Get Movin' with Mighty Moves® is a preschool physical activity program which aims to improve children's gross motor skills and physical activity levels. The home environment and parental modeling are critical factors related to child physical activity in this population. The parent component, Mighty Moves®: Fun Ways to Keep Families Active and Healthy, was designed to address barriers in the home environment that lead to unmet physical activity needs in preschoolers and their families. The program and materials were designed based on Social Marketing tenets and Social Learning Theory principles. Four Colorado Head Start centers were assigned to an experimental group as part of the Mighty Moves® group randomized trial. Quantitative and qualitative evaluation methods were used to determine what messages and materials reached and motivated the target audience to increase physical activity levels. Results of the study indicated the program's materials helped families and children to be more physically active. Additionally, materials and material dissemination were revised to enhance program goals.

Development and Implementation of a Telecommuting Evaluation Framework, and Modeling the Executive Telecommuting Adoption Process

NASA Astrophysics Data System (ADS)

Vora, V. P.; Mahmassani, H. S.

2002-02-01

This work proposes and implements a comprehensive evaluation framework to document the telecommuter, organizational, and societal impacts of telecommuting through telecommuting programs. Evaluation processes and materials within the outlined framework are also proposed and implemented. As the first component of the evaluation process, the executive survey is administered within a public sector agency. The survey data is examined through exploratory analysis and is compared to a previous survey of private sector executives. The ordinal probit, dynamic probit, and dynamic generalized ordinal probit (DGOP) models of telecommuting adoption are calibrated to identify factors which significantly influence executive adoption preferences and to test the robustness of such factors. The public sector DGOP model of executive willingness to support telecommuting under different program scenarios is compared with an equivalent private sector DGOP model. Through the telecommuting program, a case study of telecommuting travel impacts is performed to further substantiate research.

A One-Year Evaluation of a Free Fissure Sealant Program.

PubMed

M, Bakhtiar; N, Azadi; A, Golkari

2016-12-01

Pit and fissure sealant therapy has been approved as an effective measure in the prevention of occlusal dental caries. Resin based materials are the most common materials used worldwide. A variety of resin based fissure sealants are produced and used. Most of them have been presented with ideal results in research environment. However, their effectiveness in the real life, especially in a mass application program such as Iran's oral health reform plan is not clear. To evaluate the longevity of different fissure sealant applied in Iran's oral health reform plan in Fars Province (south of Iran) after one year. Seven counties were selected. One hundred 6- to 8-year-old school children who had undergone fissure sealant therapy in spring 2015 were randomly selected from each county. Their first molars were examined to evaluate the status of the fissure sealants which were applied one year ago. Data on the type/brand of fissure sealant materials, type and experience of clinicians who applied them, existence of a chair-side assistant, and whether the children were caries-free at the time of fissure sealant application were collected from the existing reports. Data of 1974 teeth from 598 children were used for the final analysis. The effects of type/brand of the material was significant on the final results and remained significant ( p < 0.001) after adjustments for the level of fluoride, urban/rural area, upper/lower jaw, type of clinician who applied the sealant, existence of a chair-side assistant, and child's gender, age, and being caries-free. Many factors affect the success rate of a fissure sealant therapy program. The type/brand of the material remained significantly related to the success rate of the fissure sealant even after adjustments for other influencing factors. In this study, ClinproTM Sealant (3M/ESPE, USA) showed better longevity after one year of application.

GLOBE Mission Earth: The evaluation of the first year's implementation.

NASA Astrophysics Data System (ADS)

Adaktylou, N. E.; Hedley, M. L.; Darche, S.; Harris-Stefanakis, E.; Silberglitt, M. D.; Struble, J.; Bingham, P.; Czajkowski, K.

2017-12-01

Here we present the evaluation findings for the first year of implementation of the `Mission Earth' Program.`Mission Earth' proposes the systematic embedding of GLOBE (Global Learning and Observations to Benefit the Environment) resources and NASA assets into the curricula of schools along the K-12 continuum, leveraging existing partnerships and networks. The main goal of the program is to create developmentally appropriate, vertically-integrated K-12 materials and activities,, supported by high quality professional development and ongoing support, engaging teachers from all grades. Its team consists of 5 geographically distributed universities and research institutions that have developed a curriculum progression following research-based best practices, have conducted the year's trainings for selected cohorts of teachers. The evaluation is a continuous process over the program's five year duration to examine implementation and opportunities for improvement. A broad set of data collection tools include a diagnostic component (needs assessment for teachers, capacity assessment for the school environment) and an assessment of implementation component (surveys for teachers and trainers, pre- and post tests for students, classroom observations, teacher interviews, portfolios). The tools used are validated instruments or ones modified to serve the program needs. The patterns emerging from the data provided information on: i) the quality of the intervention as to its design and content, ii) the alignment with the needs of the participants, iii) the implementation phase, iii) changes in the content knowledge of the students and their attitudes toward science, iv) changes in the facility of teachers to teach science in their classrooms after the professional development and materials provided, v) challenges and facilitators of implementation. Based on findings the program evaluation identifies additions/adjustments to be adopted in the following year.

A field test of a web-based workplace health promotion program to improve dietary practices, reduce stress, and increase physical activity: randomized controlled trial.

PubMed

Cook, Royer F; Billings, Douglas W; Hersch, Rebekah K; Back, Anita S; Hendrickson, April

2007-06-19

Most work sites engage in some form of health promotion programming designed to improve worker health and reduce health care costs. Although these programs have typically been delivered through combinations of seminars and print materials, workplace health promotion programs are increasingly being delivered through the Internet. The purpose of this research was to evaluate the effectiveness of a Web-based multimedia health promotion program for the workplace, designed to improve dietary practices, reduce stress, and increase physical activity. Using a randomized controlled trial design with pretest-posttest comparisons within each group, 419 employees of a human resources company were randomly assigned to the Web-based condition or to a condition that provided print materials on the same topics. All subjects were assessed at pretest and posttest through an online questionnaire containing multiple measures of health behavior and attitudes. The test period was 3 months. Questionnaire data were analyzed mainly by analysis of covariance and t tests. Retention rates were good for both groups-85% for the Web-based group and 87% for the print group. Subjects using the Web-based program performed significantly better than the print group on Attitudes Toward a Healthful Diet (F(1,415) = 7.104, P = .008) and Dietary Stage of Change (F(1,408) = 6.487, P = .01), but there were no significant group differences on the five other dietary measures. Both groups also showed improvement from pretest to posttest on most dietary measures, as indicated by significant t tests. Within the Web-based group, dosage analyses showed significant effects of the number of times the subject accessed the program on measures of Dietary Self-Efficacy (F(2,203) = 5.270, P = .003), Attitudes Toward a Healthful Diet (F(2,204) = 2.585, P = .045), and Dietary Stage of Change (F(2,200) = 4.627, P = .005). No significant differences were found between the two groups on measures of stress or physical activity, although t tests of pretest-posttest changes indicated that both groups improved on several of these measures. The Web-based group gave significantly higher ratings to the program materials than the print group on all health topics and in their overall evaluation (F(1,410) = 9.808, P = .002). The Web-based program was more effective than print materials in producing improvements in the areas of diet and nutrition but was not more effective in reducing stress or increasing physical activity. The higher ratings given to the Web-based program suggest that workers preferred it to the print materials. Both groups showed numerous pretest-posttest improvements in all health topics, although such improvements might be attributable in part to a Hawthorne effect. Results suggest that a multimedia Web-based program can be a promising means of delivering health promotion material to the workforce, particularly in the area of diet and nutrition.

A Field Test of a Web-Based Workplace Health Promotion Program to Improve Dietary Practices, Reduce Stress, and Increase Physical Activity: Randomized Controlled Trial

PubMed Central

Billings, Douglas W; Hersch, Rebekah K; Back, Anita S; Hendrickson, April

2007-01-01

Background Most work sites engage in some form of health promotion programming designed to improve worker health and reduce health care costs. Although these programs have typically been delivered through combinations of seminars and print materials, workplace health promotion programs are increasingly being delivered through the Internet. Objective The purpose of this research was to evaluate the effectiveness of a Web-based multimedia health promotion program for the workplace, designed to improve dietary practices, reduce stress, and increase physical activity. Methods Using a randomized controlled trial design with pretest-posttest comparisons within each group, 419 employees of a human resources company were randomly assigned to the Web-based condition or to a condition that provided print materials on the same topics. All subjects were assessed at pretest and posttest through an online questionnaire containing multiple measures of health behavior and attitudes. The test period was 3 months. Questionnaire data were analyzed mainly by analysis of covariance and t tests. Results Retention rates were good for both groups—85% for the Web-based group and 87% for the print group. Subjects using the Web-based program performed significantly better than the print group on Attitudes Toward a Healthful Diet (F1,415 = 7.104, P = .008) and Dietary Stage of Change (F1,408 = 6.487, P = .01), but there were no significant group differences on the five other dietary measures. Both groups also showed improvement from pretest to posttest on most dietary measures, as indicated by significant t tests. Within the Web-based group, dosage analyses showed significant effects of the number of times the subject accessed the program on measures of Dietary Self-Efficacy (F2,203 = 5.270, P = .003), Attitudes Toward a Healthful Diet (F2,204 = 2.585, P = .045), and Dietary Stage of Change (F2,200 = 4.627, P = .005). No significant differences were found between the two groups on measures of stress or physical activity, although t tests of pretest-posttest changes indicated that both groups improved on several of these measures. The Web-based group gave significantly higher ratings to the program materials than the print group on all health topics and in their overall evaluation (F1,410 = 9.808, P = .002). Conclusions The Web-based program was more effective than print materials in producing improvements in the areas of diet and nutrition but was not more effective in reducing stress or increasing physical activity. The higher ratings given to the Web-based program suggest that workers preferred it to the print materials. Both groups showed numerous pretest-posttest improvements in all health topics, although such improvements might be attributable in part to a Hawthorne effect. Results suggest that a multimedia Web-based program can be a promising means of delivering health promotion material to the workforce, particularly in the area of diet and nutrition. PMID:17581811

Evaluation of Training and Curriculum Materials Used in a Pilot Test of a Comprehensive Dental Health Program (TATTLETOOTH).

ERIC Educational Resources Information Center

Fruchter, Dorothy A.

Tattletooth was designed to help alleviate the physical, psychological and social problems associated with dental disease by teaching proper dental hygiene techniques and by stressing the importance of good dental health to the social and psychological well-being of the whole person. The program provided for the entire community with the provision…

Standards for Quality Programs in Agricultural Occupations in the Secondary Schools and Area Vocational Centers of Illinois. Phase II. A Progress Report.

ERIC Educational Resources Information Center

Stitt, Thomas R.; And Others

The purpose of this project was to prepare materials to be used in the review and evaluation of an agricultural occupations program. Based on standards validated by Illinois agricultural occupations teachers, a standards workbook was developed that included standards specific to agricultural production, agricultural sales and service, agricultural…

PASHA: facilitating the replication and use of effective adolescent pregnancy and STI/HIV prevention programs.

PubMed

Card, Josefina J; Lessard, Laura; Benner, Tabitha

2007-03-01

It is important that interventions that have been shown effective in changing risky behavior be disseminated, so that they can be replicated (implemented in a new site) and so that their effectiveness in a new setting can be investigated. This article provides an update on an innovative resource for promoting the replication of effective teen pregnancy and STI/HIV prevention programs. The resource is called the Program Archive on Sexuality, Health & Adolescence (PASHA). A Scientist Expert Panel rates candidate adolescent pregnancy and STI/HIV prevention programs based on the strength of the evidence of their effectiveness in changing risky sexual behavior among youth ages 10-19 (10-21 for STI/HIV prevention programs). Developers of selected programs are invited to make their program and evaluation materials publicly available through PASHA. PASHA publishes and disseminates replication kits for programs it successfully acquires. Fifty-six programs have been selected by PASHA's Scientist Expert Panel as "effective" in changing one or more risky behaviors associated with adolescent pregnancy or STI/HIV. Complete program and evaluation materials from 35 of these programs are now currently available through PASHA, five are pending, 12 are publicly available from other sources, and only four are not publicly available. PASHA programs are aimed at a diverse target population and cover diverse content on many abstinence and contraception/condom-related topics. Many pedagogical techniques are used to effect behavior change, noticeably role play and group discussion. PASHA illustrates well the productive research-to-practice feedback loop that is the backbone of "translation research." The resource can be used by adolescent pregnancy and STI/HIV prevention practitioners to put what works to work to continue the lowering of the nation's adolescent pregnancy and STI/HIV rates.

Tales from the Dark Side: Teacher Professional Development , Support , Activities, Student Research & Presentations

NASA Astrophysics Data System (ADS)

Walker, C. E.; Pompea, S. M.

2013-12-01

In a partnership last Spring with Arizona Public Service, the National Optical Astronomy Observatory (NOAO) created the 'Dark-Skies Energy Education Program: Energy Awareness for a Sustainable Future'. In this program, experienced science and technology education specialists from NOAO led 2 one-day professional development workshops for thirteen 6th grade teachers on dark skies and energy education. The workshops focused on three foundational, scaffolding activities and a final student research project. This in turn culminated in a Family Science Night where students presented their projects. In between these events, our NOAO team provided support for teachers through real-time video conferencing using FaceTime. In addition to the professional development, each teacher received a kit full of resource materials to perform the activities and research project. The kit was at no cost to the teacher, school, or district. Each kit contained the latest version of a tablet, which was used to facilitate communication and support for the teachers, as well as provide all the program's written teaching materials. The activities are in accordance with state, Common Core and Next Generation Science Standards. Our NOAO instructors gave firsthand experiences on how best to use these materials in a classroom or public setting. They also discussed opportunities on how they can incorporate, adapt and expand upon the activities and research projects in the classroom. Evaluation reports from the program's independent evaluator showed that the students enjoyed learning from the three foundational activities and research projects. The project presentations by the Yuma students were outstanding in their creativity, level of effort, and scientific accuracy. To summarize the evaluations, significant changes in knowledge and attitude were made with the teachers and students (from one-on-one interviews and surveys), but behavioral changes (albeit only over a semester) seemed minimal. The AGU ED session presentation will focus on the program logistics and outcomes as well as lessons learned. The Dark Skies and Energy Education Kit

Hydrologic Evaluation of Landfill Performance (HELP) Model

EPA Pesticide Factsheets

The program models rainfall, runoff, infiltration, and other water pathways to estimate how much water builds up above each landfill liner. It can incorporate data on vegetation, soil types, geosynthetic materials, initial moisture conditions, slopes, etc.

[Printed material distributed by pharmaceutical propaganda agents].

PubMed

Mejía, R; Avalos, A

2001-01-01

Pharmaceutical sales representatives (drug reps) frequently visit 70% to 90% of physicians during their daily clinical practice and many consider the promotional printed material to be a major source of clinical information. We evaluated samples of the promotional printed material distributed to physicians by drug reps in order to determine whether the data contained in the promotional material is correct and supported by references accessible in Argentina. A consecutive sample of all the promotional material distributed by drug reps in the general internal medicine program (Hospital de Clínicas) was collected between March 15 and April 15, 2000. Reprints and monographs were excluded. Clinical information was reviewed by two general internists and compared to information in a major pharmacology textbook and in an electronic medical information program. References cited were reviewed for correct listing and accessibility in any of the four major medical libraries in Buenos Aires. Of the sixty-four pieces of promotional material collected, thirty were randomly selected and evaluated. In twenty one (70%) the therapeutic effect promoted in advertisement appeared in Goodman & Gilman's 9th edition textbook of pharmacology, in the pharmacology section of the Up-to-Date version 8.1 or in both. Only eighteen (60%) of the thirty promotional printed material evaluated had statements supported by cited references. From a total of 131 references cited in promotional materials, sixty (46%) were incorrectly listed according to the International Committee of Medical Journal Editors. These references were inaccessible. Of the 71 references correctly cited, 49 (69%) were not available in any of the four major medical libraries in Buenos Aires and 8 were available in only two of the libraries. Twenty-two references were reviewed, and in twelve of these (54%), the objective of the research study concurred with the statement of the promotional printed material. Adverse reactions, warnings about drug interactions and contraindications were absent from all promotional printed material. It can be concluded that the promotional printed material distributed by the drug reps in Buenos Aires are biased and provide misinformation more often than not. We recommend that practicing physicians routinely disregard promotional printed material as a source of clinical information.

An Assessment of 25-Hydroxyvitamin D Measurements in Comparability Studies Conducted by the Vitamin D Metabolites Quality Assurance Program

PubMed Central

Bedner, Mary; Lippa, Katrice A.; Tai, Susan S.-C.

2013-01-01

Background The National Institute of Standards and Technology (NIST), in collaboration with the National Institutes of Health Office of Dietary Supplements, established the first accuracy-based program for improving the comparability of vitamin D metabolite measurements, the Vitamin D Metabolites Quality Assurance Program. Methods Study samples were comprised of human serum or plasma Standard Reference Materials (SRMs) with 25-hydroxyvitamin D values that were determined at NIST. Participants evaluated the materials using immunoassay (IA), liquid chromatography (LC) with mass spectrometric detection, and LC with ultraviolet absorbance detection. NIST evaluated the results for concordance within the participant community as well as trueness relative to the NIST value. Results For the study materials that contain mostly 25-hydroxyvitamin D3 (25(OH)D3), the coefficient of variation (CV) for the participant results was consistently in the range from 7% to 19%, and the median values were biased high relative to the NIST values. However, for materials that contain significant concentrations of both 25-hydroxyvitamin D2 (25(OH)D2) and 25(OH)D3, the median IA results were biased lower than both the LC and the NIST values, and the CV was as high as 28%. The first interlaboratory comparison results for SRM 972a Vitamin D Metabolites in Human Serum are also reported. Conclusions Relatively large within-lab and between-lab variability hinders conclusive assessments of bias and accuracy. PMID:23978484

Newborn screening education on the internet: a content analysis of North American newborn screening program websites.

PubMed

Araia, Makda H; Potter, Beth K

2011-09-01

The Internet is a potentially important medium for communication about public health programs including newborn screening. This study explores whether the information available on official newborn screening program websites is consistent with existing guidelines regarding educational content for parents. We conducted a systematic search of the public websites of newborn screening programs in the US and Canada, identifying web pages and downloadable brochures that contained educational information. Two researchers independently reviewed all documents to determine the extent to which they included 14 key recommended educational messages. We identified 85 documents containing educational information on 46 US and 6 Canadian newborn screening program websites. The documents contained from 1 to 14 of the recommended messages. The majority of identified materials emphasized the importance and benefits of screening. The differences between US and Canadian materials were related to the importance of parental involvement in follow-up and issues of consent and storage of blood spots. Our findings are consistent with studies of non-web-based newborn screening education materials. The results emphasize the need for further evaluation of newborn screening education, including internet-based resources, particularly in terms of the impact of particular messages on parental attitudes and behaviors.

Review of evaluations of educational approaches to promote safe storage of firearms

PubMed Central

McGee, K; Coyne-Beasley, T; Johnson, R

2003-01-01

Objective: To systematically review evaluation studies of educational interventions promoting safe firearm storage. Methods: Medline, ERIC, PsycINFO, Criminal Justice Periodicals Index, Cumulative Index of Nursing and Allied Health Literature, and Sociofile were searched. The references from each potentially eligible study were checked, and experts in the field were contacted for additional reports. In addition, an internet search was performed to identify programs not published in the conventional literature. Sources relevant to safe firearm storage promotion were selected and evaluated. Results: Seven studies met inclusion criteria: adult subjects, program description was included, and firearm storage outcomes were measured. One was a randomized controlled trial and the other six were one group pre-test and/or post-test. The studies were classified into the following categories based on the intervention strategies used: (1) counseling and firearm safety materials (n=3); (2) counseling/educational message (n=3); and (3) firearm safety materials distribution (n=1).The outcomes were safe firearms storage (firearms locked up and unloaded or removal from home) after intervention. Four studies, three using counseling and materials distribution, reported improved storage after the interventions. Conclusions: It is not yet clear what types of interventions, or which specific intervention components, prompt gun owners to securely store their weapons. Increased understanding of gun storage behaviors and stronger evaluation designs will aid further understanding of this important issue. PMID:12810734

Chile: Acceptability of a Training Program for Depression Management in Primary Care

PubMed Central

Marín, Rigoberto; Martínez, Pablo; Cornejo, Juan P.; Díaz, Berta; Peralta, José; Tala, Álvaro; Rojas, Graciela

2016-01-01

Background: In Chile, there are inconsistencies in the management of depression in primary care settings, and the National Depression Program, currently in effect, was implemented without a standardized training program. The objective of this study is to evaluate the acceptability of a training program on the management of depression for primary care health teams. Methods: The study was a randomized controlled trial, and two primary centers from the Metropolitan Region of Santiago were randomly selected to carry out the intervention training program. Pre-post surveys were applied, to evaluate expectations and satisfaction with the intervention, respectively. Descriptive and content analysis was carried out. Result: The sample consisted of 41 health professionals, 56.1% of who reported that their expectations for the intervention were met. All of the training activities were evaluated with scores higher than 6.4 (on a 1–7 scale). The trainers, the methodology, and the learning environment were considered strengths and facilitators of the program, while the limited duration of the training, the logistical problems faced during part of the program, and the lack of educational material were viewed as weaknesses. Conclusion: The intervention was well accepted by primary health care teams. However, the clinical impact in patients still has to be evaluated. PMID:27375531

Cost comparisons for the use of nonterrestrial materials in space manufacturing of large structures

NASA Technical Reports Server (NTRS)

Bock, E. H.; Risley, R. C.

1979-01-01

This paper presents results of a study sponsored by NASA to evaluate the relative merits of constructing solar power satellites (SPS) using resources obtained from the earth and from the moon. Three representative lunar resources utilization (LRU) concepts are developed and compared with a previously defined earth baseline concept. Economic assessment of the alternatives includes cost determination, economic threshold sensitivity to manufacturing cost variations, cost uncertainties, program funding schedule, and present value of costs. Results indicate that LRU for space construction is competitive with the earth baseline approach for a program requiring 100,000 metric tons per year of completed satellites. LRU can reduce earth-launched cargo requirements to less than 10% of that needed to build satellites exclusively from earth materials. LRU is potentially more cost-effective than earth-derived material utilization, due to significant reductions in both transportation and manufacturing costs. Because of uncertainties, cost-effectiveness cannot be ascertained with great confidence. The probability of LRU attaining a lower total program cost within the 30-year program appears to range from 57 to 93%.

Production assurance program strategy for N Reactor balance of plant systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

House, R.D.; Bitten, E.J.; Keenan, J.P.

1986-03-18

A production assurance program has been established for N Reactor, a dual purpose reactor plant, operated to produce special nuclear materials and steam for electricity. N Reactor, which began operation in December 1963, is now approaching the end of its design life. This paper describes the two phase program for Balance of Plant (BOP) systems. The Phase I evaluation has been completed and indications are that the lifetime of systems and components could be extended by implementing appropriate surveillance, operations and maintenance strategies. In Phase II, a thorough evaluation of components and systems is underway and action items are beingmore » identified which will allow component and system extended operation.« less

Feasibility evaluation of the monolithic braided ablative nozzle

NASA Astrophysics Data System (ADS)

Director, Mark N.; McPherson, Douglass J., Sr.

1992-02-01

The feasibility of the monolithic braided ablative nozzle was evaluated as part of an independent research and development (IR&D) program complementary to the National Aeronautics and Space Administration/Marshall Space Flight Center (NASA/MSFC) Low-Cost, High-Reliability Case, Insulation and Nozzle for Large Solid Rocket Motors (LOCCIN) Program. The monolithic braided ablative nozzle is a new concept that utilizes a continuous, ablative, monolithic flame surface that extends from the nozzle entrance, through the throat, to the exit plane. The flame surface is fabricated using a Through-the-Thickness braided carbon-fiber preform, which is impregnated with a phenolic or phenolic-like resin. During operation, the braided-carbon fiber/resin material ablates, leaving the structural backside at temperatures which are sufficiently low to preclude the need for any additional insulative materials. The monolithic braided nozzle derives its potential for low life cycle cost through the use of automated processing, one-component fabrication, low material scrap, low process scrap, inexpensive raw materials, and simplified case attachment. It also has the potential for high reliability because its construction prevents delamination, has no nozzle bondlines or leak paths along the flame surface, is amenable to simplified analysis, and is readily inspectable. In addition, the braided construction has inherent toughness and is damage-tolerant. Two static-firing tests were conducted using subscale, 1.8 - 2.0-inch throat diameter, hardware. Tests were approximately 15 seconds in duration, using a conventional 18 percent aluminum/ammonium perchlorate propellant. The first of these tests evaluated the braided ablative as an integral backside insulator and exit cone; the second test evaluated the monolithic braided ablative as an integral entrance/throat/exit cone nozzle. Both tests met their objectives. Radial ablation rates at the throat were as predicted, approximately 0.017 in/sec; these rates are comparable to those for tapewrapped carbon phenolic materials. The maximum temperature rise on the outside surface occurred one inch from the nozzle exit plane and was less than 50 F at the end of the test. Further development for this concept is scheduled as part of phase 2 on the NASA/MSFC LOCCIN Program. During this effort, the nozzle materials, architecture, and processing will be optimized and tested in nozzles with 3- and 10-inch diameter throats. Further, a design and manufacturing plan for a full-scale, 20-inch-diameter throat, nozzle will be developed.

Materials for advanced rocket engine turbopump turbine blades

NASA Technical Reports Server (NTRS)

Chandler, W. T.

1985-01-01

A study program was conducted to identify those materials that will provide the greatest benefits as turbine blades for advanced liquid propellant rocket engine turbines and to prepare technology plans for the development of those materials for use in the 1990 through 1995 period. The candidate materials were selected from six classes of materials: single-crystal (SC) superalloys, oxide dispersion-strengthened (ODS) superalloys, rapid solidification processed (RSP) superalloys, directionally solidified eutectic (DSE) superalloys, fiber-reinforced superalloy (FRS) composites, and ceramics. Properties of materials from the six classes were compiled and evaluated and property improvements were projected approximately 5 years into the future for advanced versions of materials in each of the six classes.

Conservation and Renewable Energy Program: Bibliography, 1988 edition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vaughan, K.H.

The 831 references covering the period 1980 through Feb. 1988, are arranged under the following: analysis and evaluation, building equipment, building thermal envelope systems and materials, community systems and cogeneration, residential conservation service, retrofit, advanced heat engine ceramics, alternative fuels, microemulsion fuels, industrial chemical heat pumps, materials for waste heat utilization, energy conversion and utilization materials, tribology, emergency energy conservation,inventions, electric energy systems, thermal storage, biofuels production, biotechnology, solar technology, geothermal, and continuous chromatography in multicomponent separations. An author index is included.

Space qualification of silicon carbide for mirror applications: progress and future objectives

NASA Astrophysics Data System (ADS)

Palusinski, Iwona A.; Ghozeil, Isaac

2006-09-01

Production of optical silicon carbide (SiC) for mirror applications continues to evolve and there are renewed plans to use this material in future space-based systems. While SiC has the potential for rapid and cost-effective manufacturing of large, lightweight, athermal optical systems, this material's use in mirror applications is relatively new and has limited flight heritage. This combination of drivers stresses the necessity for a space qualification program for this material. Successful space qualification will require independent collaboration to absorb the high cost of executing this program while taking advantage of each contributing group's laboratory expertise to develop a comprehensive SiC database. This paper provides an overview of the trends and progress in the production of SiC, and identifies future objectives such as non-destructive evaluation and space-effects modeling to ensure proper implementation of this material into future space-based systems.

Preliminary Evaluation Report on the Los Angeles City Schools, SB 28 Demonstration Program in Mathematics.

ERIC Educational Resources Information Center

Gordon, C. Wayne

The purpose of this preliminary report is to describe and evaluate the Los Angeles Model Mathematics Project (LAMMP). The objectives of this project include the improvement of mathematical skills and understanding of mathematical concepts, the improvement of students' self-image, the development of instructional materials and the assessment of…

Brief Cognitive-Behavioral Therapy for Anxious Youth: Feasibility and Initial Outcomes

ERIC Educational Resources Information Center

Crawley, Sarah A.; Kendall, Philip C.; Benjamin, Courtney L.; Brodman, Douglas M.; Wei, Chiaying; Beidas, Rinad S.; Podell, Jennifer L.; Mauro, Christian

2013-01-01

We developed and evaluated a brief (8-session) version of cognitive-behavioral therapy (BCBT) for anxiety disorders in youth ages 6 to 13. This report describes the design and development of the BCBT program and intervention materials (therapist treatment manual and child treatment workbook) and an initial evaluation of child treatment outcomes.…

Design, Development and Hotfire Testing of Monolithic Copper and Bimetallic Additively Manufactured Combustion Chambers

NASA Technical Reports Server (NTRS)

Gradl, Paul; Barnett, Greg; Brandsmeier, Will; Greene, Sandy Elam; Protz, Chris

2016-01-01

NASA and industry partners are working towards fabrication process development to reduce costs and schedules associated with manufacturing liquid rocket engine components with the goal of reducing overall mission costs. One such technique being evaluated is powder-bed fusion or selective laser melting (SLM) otherwise commonly referred to as additive manufacturing. The NASA Low Cost Upper Stage Propulsion (LCUSP) program was designed to develop processes and material characterization for the GRCop-84 copper-alloy commensurate with powder bed additive manufacturing, evaluate bimetallic deposition and complete testing of a full scale combustion chamber. As part of this development, the process has been transferred to industry partners to enable a long-term supply chain of monolithic copper combustion chambers. As a direct spin off of this program, NASA is working with industry partners to further develop the printing process for the GRCop-84 material in addition to the C-18150 (CuCrZr) material. To advance the process further and allow for optimization with multiple materials, NASA is also investigating the feasibility of bimetallic additively manufactured chambers. A 1.2k sized thrust-chamber was designed and developed to compare the printing process of the GRCop-84 and C-18150 SLM materials. A series of similar MCC liners also completed development with an Inconel 625 jacket bonded to the GRcop-84 liner evaluating direct metal deposition (DMD) laser and arc-based techniques. This paper describes the design, development, manufacturing and testing of these combustion chambers and associated lessons learned throughout the design and development process.

Investigation of test methods, material properties, and processes for solar cell encapsulants

NASA Technical Reports Server (NTRS)

Willis, P. B.

1982-01-01

Technical investigations concerned the development of advanced cure chemistries for lamination type pottants; the continued evaluation of soil resistant surface treatments, and the results of an accelerated aging test program for the comparison of material stabilities. New compounds were evaluated for efficiency in curing both ethylene/vinyl acetate and ethylene/methyl acrylate pottants intended for vacuum bag lamination of solar cells. One compound in particular, designated Lupersol - TBEC (Lucidol Division of Pennwalt Corp.) was found to be unusually effective in promoting the rapid cure of both these materials. Formulation of these resins with TBEC resulted in compositions of very high gel content, lower temperatures of activation, and much lower cure times, even in the ethylene/methyl acrylate polymer that is more difficult to cure. It is expected that TBEC modified pottant formulations may permit the lamination/encapsulation step to be operated at lower temperatures, higher speed, higher throughput and a much wider tolerance for intentional or accidental variations in the cure schedule. An experimental program continued to determine the effectiveness of soil resistant coatings.

Impacts of Chandra X-ray Observatory Public Communications and Engagement

NASA Astrophysics Data System (ADS)

Arcand, Kimberly K.; Watzke, Megan; Lestition, Kathleen; Edmonds, Peter

2015-01-01

The Chandra X-ray Observatory Center runs a multifaceted Public Communications & Engagement program encompassing press relations, public engagement, and education. Our goals include reaching a large and diverse audience of national and international scope, establishing direct connections and working relationships with the scientists whose research forms the basis for all products, creating peer-reviewed materials and activities that evolve from an integrated pipeline design and encourage users toward deeper engagement, and developing materials that target underserved audiences such as women, Spanish speakers, and the sight and hearing impaired. This talk will highlight some of the key features of our program, from the high quality curated digital presence to the cycle of research and evaluation that informs our practice at all points of the program creation. We will also discuss the main impacts of the program, from the tens of millions of participants reached through the establishment and sustainability of a network of science 'volunpeers.'

Summaries of FY 1993 geosciences research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-12-01

The Department of Energy supports research in the geosciences in order to provide a sound foundation of fundamental knowledge in those areas of the geosciences that are germane to the DOE`s many missions. The Geosciences Research Program is supported by the Office of Energy Research. The participants in this program include DOE laboratories, academic institutions, and other governmental agencies. These activities are formalized by a contract or grant between the DOE and the organization performing the work, providing funds for salaries, equipment, research materials, and overhead. The summaries in this document, prepared by the investigators, describe the scope of themore » individual programs. The Geosciences Research Program includes research in geophysics, geochemistry, resource evaluation, solar-terrestrial interactions, and their subdivisions including earth dynamics, properties of earth materials, rock mechanics, underground imaging, rock-fluid interactions, continental scientific drilling, geochemical transport, solar-atmospheric physics, and modeling, with emphasis on the interdisciplinary areas.« less

A research program to reduce interior noise in general aviation airplanes

NASA Technical Reports Server (NTRS)

Peschier, T. D.; Andrews, D.; Henderson, T.

1977-01-01

The relevance of KU-FRL test results in predicting (theoretically or semi-empirically) interior noise levels in general aviation aircraft was studied. As a result of this study, it was decided to make a few additions to the program. These additions are: (1) to use three (instead of two) noise sources in the plane wave tube to evaluate the influence of excitation spectrum on panel response, (2) to use theoretical and experimental data obtained in the course of the project to develop more efficient noise reduction materials (or procedures to apply these), or to develop guidelines for the design of such materials for procedures, and (3) to use nonstructural materials in the collection of specimens to be tested in the KU-FRL plane wave tube.

Light Duty Truck Weight Reduction Evaluation

DOT National Transportation Integrated Search

1980-10-01

The objectives of this program were to identify the weight reduction potential of pickup trucks, vans, and utility vehicles less than or equal to 8500 lb. gross vehicle weight through design modification, redesign, and material substitution; and more...

Experimental use of geogrids as an alternative to gravel placement : interim report - first year.

DOT National Transportation Integrated Search

2001-02-01

With the ongoing demand for improved infrastructure, the Maine Department of : Transportation (MDOT) continues to identify and evaluate new and innovative : construction methods and materials. The Departments Capital Highway Improvement : Program ...

Thrust Chamber Material Technology Program

DTIC Science & Technology

1989-03-01

about 5 percent lower than those of NASA.Z. Alloy 1035 was essentially equivalent to NASA-Z. However, Alloy 1032, containing titanium, exhibited such...Characterization Methods .................................... 33 5 Evaluation Methods ......................................................... 37 III...115 5 Discussion ..................................................................... 120 V ALLOY CHARACTERIZATION

Recent progress in NASA Langley Research Center textile reinforced composites program

NASA Technical Reports Server (NTRS)

Dexter, H. Benson; Harris, Charles E.; Johnston, Norman J.

1992-01-01

Research was conducted to explore the benefits of textile reinforced composites for transport aircraft primary structures. The objective is to develop and demonstrate the potential of affordable textile reinforced composite materials to meet design properties and damage tolerance requirements of advanced aircraft structural concepts. Some program elements include development of textile preforms, processing science, mechanics of materials, experimental characterization of materials, and development and evaluation of textile reinforced composite structural elements and subcomponents. Textile 3-D weaving, 3-D braiding, and knitting and/or stitching are being compared with conventional laminated tape processes for improved damage tolerance. Through-the-thickness reinforcements offer significant damage tolerance improvements. However, these gains must be weighted against potential loss in in-plane properties such as strength and stiffness. Analytical trade studies are underway to establish design guidelines for the application of textile material forms to meet specific loading requirements. Fabrication and testing of large structural parts are required to establish the potential of textile reinforced composite materials.

School climate and teachers' beliefs and attitudes associated with implementation of the positive action program: a diffusion of innovations model.

PubMed

Beets, Michael W; Flay, Brian R; Vuchinich, Samuel; Acock, Alan C; Li, Kin-Kit; Allred, Carol

2008-12-01

Teacher- and school-level factors influence the fidelity of implementation of school-based prevention and social character and development (SACD) programs. Using a diffusion of innovations framework, the relationships among teacher beliefs and attitudes towards a prevention/SACD program and the influence of a school's administrative support and perceptions of school connectedness, characteristics of a school's climate, were specified in two cross-sectional mediation models of program implementation. Implementation was defined as the amount of the programs' curriculum delivered (e.g., lessons taught), and use of program-specific materials in the classroom (e.g., ICU boxes and notes) and in relation to school-wide activities (e.g., participation in assemblies). Teachers from 10 elementary schools completed year-end process evaluation reports for year 2 (N = 171) and 3 (N = 191) of a multi-year trial. Classroom and school-wide material usage were each favorably associated with the amount of the curriculum delivered, which were associated with teachers' attitudes toward the program which, in turn, were related to teachers' beliefs about SACD. These, in turn, were associated with teachers' perceptions of school climate. Perceptions of school climate were indirectly related to classroom material usage and both indirectly and directly related to the use of school-wide activities. Program developers need to consider the importance of a supportive environment on program implementation and attempt to incorporate models of successful school leadership and collaboration among teachers that foster a climate promoting cohesiveness, shared visions, and support.

Space Technology Research Vehicle (STRV)-2 program

NASA Astrophysics Data System (ADS)

Shoemaker, James; Brooks, Paul; Korevaar, Eric J.; Arnold, Graham S.; Das, Alok; Stubstad, John; Hay, R. G.

2000-11-01

The STRV-2 program is the second in a series of three collaborative flight test programs between the U.S. Ballistic Missile Defense Organization (BMDO) and the United Kingdom (UK) Minstry of Defence (MoD). The STRV-2 Experiment Module contains five major experiments to provide proof-of-concept data on system design, data on the mid-earth orbit (MEO) space environment, and data on durability of materials and components operating in the MEO environment. The UK Defence Evaluation and Research Agency (DERA) has provided a mid- wavelength infrared (MWIF) imager to evaluate passive detection of aircraft from space. BMDO, in conjunction with the US Air Force Research Laboratory (AFRL) and the National Aeronautics and Space Administration (NASA), have provided experiments to evaluate use of adaptive structures for vibration suppression, to investigate the use of high bandwidth laser communications to transmit data from space to ground or airborne receivers, to study the durability of materials and components in the MEO space environment, and to measure radiation and micrometeoroid/debris fluence. These experiments are mounted on all- composite structure. This structure provides a significant reduction in weight and cost over comparable aluminum designs while maintaining the high stiffness required by optical payloads. In 1994, STRV-2 was manifested for launch by the DOD Space Test Program. STRV-2, the primary payload on the Tri-Service eXperiment (TSX)-5 spacecraft, was successfully launched on 7 June 2000 on a Pegasus XL from Vandenbery AFB, CA. The STRV-2 program, like the companion STRV-1 program, validates the viability of multi-national, multi-agency collaborations to provide cost effective acquisition of space test data. The experimental data to be obtained will reduce future satellite risk and provide guidelines for further system development.

Computers in medical education 1: evaluation of a problem-orientated learning package.

PubMed

Devitt, P; Palmer, E

1998-04-01

A computer-based learning package has been developed, aimed at expanding students' knowledge base, as well as improving data-handling abilities and clinical problem-solving skills. The program was evaluated by monitoring its use by students, canvassing users' opinions and measuring its effectiveness as a learning tool compared to tutorials on the same material. Evaluation was undertaken using three methods: initially, by a questionnaire on computers as a learning tool and the applicability of the content: second, through monitoring by the computer of student use, decisions and performance; finally, through pre- and post-test assessment of fifth-year students who either used a computer package or attended a tutorial on equivalent material. Most students provided positive comments on the learning material and expressed a willingness to see computer-aided learning (CAL) introduced into the curriculum. Over a 3-month period, 26 modules in the program were used on 1246 occasions. Objective measurement showed a significant gain in knowledge, data handling and problem-solving skills. Computer-aided learning is a valuable learning resource that deserves better attention in medical education. When used appropriately, the computer can be an effective learning resource, not only for the delivery of knowledge. but also to help students develop their problem-solving skills.

A Methodology for Evaluating the Hygroscopic Behavior of Wood in Adaptive Building Skins using Motion Grammar

NASA Astrophysics Data System (ADS)

El-Dabaa, Rana; Abdelmohsen, Sherif

2018-05-01

The challenge in designing kinetic architecture lies in the lack of applying computational design and human computer interaction to successfully design intelligent and interactive interfaces. The use of ‘programmable materials’ as specifically fabricated composite materials that afford motion upon stimulation is promising for low-cost low-tech systems for kinetic facades in buildings. Despite efforts to develop working prototypes, there has been no clear methodological framework for understanding and controlling the behavior of programmable materials or for using them for such purposes. This paper introduces a methodology for evaluating the motion acquired from programmed material – resulting from the hygroscopic behavior of wood – through ‘motion grammar’. Motion grammar typically allows for the explanation of desired motion control in a computationally tractable method. The paper analyzed and evaluated motion parameters related to the hygroscopic properties and behavior of wood, and introduce a framework for tracking and controlling wood as a programmable material for kinetic architecture.

An evaluation of client satisfaction with training programs and technical assistance provided by Florida's Coordinated School Health Program Office.

PubMed

Weiler, R M; Pigg, R M

2000-11-01

Client or customer satisfaction surveys assess the perceived quality of programs, products, services, and employee performance. Such assessments prove beneficial for evaluation and planning purposes. This survey examined the satisfaction of clients using the programs, services, and technical assistance provided through the Coordinated School Health Program Office (CSHPO) in the Florida Department of Education. Using the 42-item Client Satisfaction Survey, data were collected in summer 1999 from 300 of 574 clients (52.3%) who attended training sessions or sought technical assistance from CSHPO during 1996-1999. More than two-thirds (67.2%) of clients rated the training program as "very good" or "excellent" at increasing their understanding about the concept of a coordinated school health program. Overall, 69.7% of clients rated the training programs they attended as "very good" or "excellent." Resource materials and staff effectiveness rated positively as well. Findings confirmed client satisfaction with CSHPO's training programs, technical assistance, and staff. Information obtained through the client satisfaction survey can be used by CSHPO to assist in future program planning and resource allocations.

The NASA atomic oxygen effects test program

NASA Technical Reports Server (NTRS)

Banks, Bruce A.; Rutledge, Sharon K.; Brady, Joyce A.

1988-01-01

The NASA Atomic Oxygen Effects Test Program was established to compare the low earth orbital simulation characteristics of existing atomic oxygen test facilities and utilize the collective data from a multitude of simulation facilities to promote understanding of mechanisms and erosion yield dependence upon energy, flux, metastables, charge, and environmental species. Four materials chosen for this evaluation include Kapton HN polyimide, FEP Teflon, polyethylene, and graphite single crystals. The conditions and results of atomic oxygen exposure of these materials is reported by the participating organizations and then assembled to identify degrees of dependency of erosion yields that may not be observable from any single atomic oxygen low earth orbital simulation facility. To date, the program includes 30 test facilities. Characteristics of the participating test facilities and results to date are reported.

Development of flame-resistant structures for use in the Apollo and Skylab programs

NASA Technical Reports Server (NTRS)

Coskren, R. J.

1973-01-01

Flame-resistant materials have been designed and fabricated to meet certain end-use criteria established by NASA with emphasis on meeting established flammability standards. The program had three general phases: (1) fabrication of candidate sample structures for evaluation by the Structures and Mechanics Division and/or NASA contractors; (2) physical testing of the structures developed; and (3) supply of required quantities of specific items for fabrication into prototype and/or flight items for the Apollo and Skylab programs.

Fuel cell technology program

NASA Technical Reports Server (NTRS)

1972-01-01

A program to advance the technology for a cost-effective hydrogen/oxygen fuel cell system for future manned spacecraft is discussed. The evaluation of base line design concepts and the development of product improvements in the areas of life, power, specific weight and volume, versatility of operation, field maintenance and thermal control were conducted from the material and component level through the fabrication and test of an engineering model of the fuel cell system. The program was to be accomplished in a 13 month period.

A statewide biomedical communications network for South Carolina.

PubMed

Mangiaracina, J; Sawyer, W A

1976-03-01

In 1972, the Medical University of South Carolina was awarded a contract to establish 4 Area Health Education Centers in South Carolina. These centers, based in community hospitals, provide residency programs, clinical instruction for students, and continuing education programs for health professionals. In late 1974, contractual agreements between the Medical University of South Carolina's Library/Learning Resource Center and the Area Health Education Centers were negotiated to provide book and nonbook learning materials to all health practitioners in South Carolina. The history and the functions of the resulting network and evaluation of audiovisual and self-instructional learning materials procured and distributed by the network are described.

Blended learning: strengths, challenges, and lessons learned in an interprofessional training program.

PubMed

Lotrecchiano, G R; McDonald, P L; Lyons, L; Long, T; Zajicek-Farber, M

2013-11-01

This field report outlines the goals of providing a blended learning model for an interdisciplinary training program for healthcare professionals who care for children with disabilities. The curriculum blended traditional face-to-face or on-site learning with integrated online interactive instruction. Credit earning and audited graduate level online coursework, community engagement experiences, and on-site training with maternal and child health community engagement opportunities were blended into a cohesive program. The training approach emphasized adult learning principles in different environmental contexts integrating multiple components of the Leadership Education in Neurodevelopmental and Related Disabilities Program. This paper describes the key principles adopted for this blended approach and the accomplishments, challenges, and lessons learned. The discussion offers examples from training content, material gathered through yearly program evaluation, as well as university course evaluations. The lessons learned consider the process and the implications for the role of blended learning in this type of training program with suggestions for future development and adoption by other programs.

Preparing Refugees for Skilled Employment: Methods and Materials for Coordinated Instruction in Vocational Skills, English as a Second Language, Mathematics, Work Orientation and Independent Job Search.

ERIC Educational Resources Information Center

Jewish Employment and Vocational Service, Philadelphia, PA. Center for Career Services.

This manual serves as a guide for the evaluation, design, administration, and teaching of vocational training programs for limited-English-proficient (LEP) students, based on a coordinated vocational skills curriculum developed for refugee clients. The vocational focus of the program is woodworking and skilled assembly, but the principles of…

Interactive Video-Cassette Feasibility Study. Formative Evaluation Report on 'Signals.' I.E.T. Paper on Broadcasting No. 226.

ERIC Educational Resources Information Center

Laurillard, D. M.

This study of the feasibility of using existing videocassettes for interactive video included field tests with Open University summer school students. The aims of the study were to discover whether video material originally made for broadcast could be used in an interactive program which involves breaking up the intended flow of the program;…

Teaching Algebra to Ninth and Tenth Grade Pupils with the Use of Programmed Materials and Teaching Machines.

ERIC Educational Resources Information Center

Raymond, Roger A.

In the second year of a study to compare and evaluate programed and conventional instruction in algebra for the ninth and tenth grades, comparisons of the control and experimental groups in each grade were again based on scores from the Lankton First-Year Algebra Test and the California Study Methods Survey (CSMS). Although there was a…

Challenges and solutions in the evaluation of a low back pain disease management program.

PubMed

Kotsos, Thomas; Muldowney, Kevin; Chapa, Griselda; Martin, J Eric; Linares, Antonio

2009-02-01

This paper examines a novel approach to evaluating a nurse-run telephonic low back pain (LBP) disease management (DM) program offered by a fully-insured commercial health plan population with approximately 150,000 members located in the northeastern United States. Members with at least 6 member months of eligibility were identified to have LBP using administrative claims and eligibility data. The LBP program relies on telephonic nurse management augmented by printed materials, adapting and advocating HEDIS imaging guidelines, and drug utilization review. Outcomes of this LBP DM program were assessed using a pre-post population-based approach as recommended in the DMAA Outcomes Guidelines Report. Baseline year and program year populations were segmented into 5 LBP clinical categories and each was weight adjusted using population size. LBP-related medical service utilization and pharmacy utilization also were evaluated. Individuals under active LBP management exhibited a decrease in LBP-related imaging and surgeries. Overall analgesic use also decreased. These data suggest the LBP DM program is associated with a decrease in imaging, surgeries, and analgesic use. The magnitude of the clinically segmented weight-adjusted return on investment (ROI) was lower than the unadjusted ROI, but was directionally positive indicating program impact. This adjustment is necessary in order to gain insight into and consistency of the results of a comprehensive LBP DM program evaluation.

Evaluating a program to build data capacity for core public health functions in local maternal child and adolescent health programs in california.

PubMed

Oliva, Geraldine; Rienks, Jennifer; Chavez, Gilberto F

2007-01-01

To improve local Maternal and Child Health programs' capacity to collect and analyze data to support core public health functions, the California Maternal and Child Health Branch (CAMCHB) and the University of California San Francisco Family Health Outcomes project (FHOP) entered into a cooperative agreement. FHOP utilizes a 6-pronged strategy: face-to-face training, telephone technical assistance, on-site consultation, development of automated analytic tools, development of written guidelines, and web dissemination of data and materials. We evaluated the acceptability and effectiveness of these approaches. Local Health Jurisdiction (LHJ) staff completed a self-administered questionnaire on use of and satisfaction with FHOP's services. A 34-item assessment tool was used to independently evaluate each 5-year community assessment plan submitted by LHJs to the CAMCHB. Administrative data on the use of FHOP's service was also considered. Correlational analyses were done to determine if use of FHOP services and materials was related to more adequate plans. LHJs with higher overall adequacy scores on their plans had an overall higher level of use of FHOP's products and services. LHJs with higher adequacy scores reported calling FHOP for technical assistance more frequently, using FHOP's book - "Developing an Effective Planning Process: A Guide for Local MCH Programs," and using FHOP's automated tools including EpiBC, an EpiINFO based program for birth certificate analysis, and Microsoft Excel data analysis templates. This 6-pronged strategy is well utilized and accepted by local MCH staff and appears to have some degree of association with better quality of local MCH plan documents.

NASA-UVa light aerospace alloy and structure technology program supplement: Aluminum-based materials for high speed aircraft

NASA Technical Reports Server (NTRS)

Starke, E. A., Jr.

1993-01-01

This report on the NASA-UVa Light Aerospace Alloy and Structure Technology Program Supplement: Aluminum-Based Materials for High Speed Aircraft covers the period from January 1, 1992 to June 30, 1992. The objective of the research is to develop aluminum alloys and aluminum matrix composites for the airframe which can efficiently perform in the HSCT environment for periods as long as 60,000 hours (certification for 120,000 hours) and, at the same time, meet the cost and weight requirements for an economically viable aircraft. Current industry baselines focus on flight at Mach 2.4. The research covers four major materials systems: (1) ingot metallurgy 2XXX, 6XXX, and 8XXX alloys, (2) powder metallurgy 2XXX alloys, (3) rapidly solidified, dispersion strengthened Al-Fe-X alloys, and (4) discontinuously reinforced metal matrix composites. There are ten major tasks in the program which also include evaluation and trade-off studies by Boeing and Douglas aircraft companies.

Disseminating Comparative Effectiveness Research Through Community-based Experiential Learning.

PubMed

Hansen, Richard A; Williamson, Margaret; Stevenson, Lynn; Davis, Brandy R; Evans, R Lee

2017-02-25

Objectives. To launch and evaluate a comparative effectiveness research education and dissemination program as part of an introductory pharmacy practice experience (IPPE). Methods. First- through third-year PharmD students received training on comparative effectiveness research and disseminated printed educational materials to patients in the community who they were monitoring longitudinally (n=314). Students completed an assessment and initial visit documentation form at the first visit, and a follow-up assessment and documentation form at a subsequent visit. Results. Twenty-three diabetes patients, 29 acid-reflux patients, 30 osteoarthritis patients, and 50 hypertension patients received materials. Aside from the patient asking questions, which was the most common outcome (n=44), the program resulted in 38 additional actions, which included stopping, starting, or changing treatments or health behaviors, or having additional follow-up or diagnostic testing. Small but positive improvements in patient understanding, confidence, and self-efficacy were observed. Conclusions. Dissemination of comparative effectiveness research materials in an IPPE program demonstrated a positive trend in markers of informed decision-making.

NASA-UVa light aerospace alloy and structures technology program supplement: Aluminum-based materials for high speed aircraft

NASA Technical Reports Server (NTRS)

Starke, E. A., Jr. (Editor)

1995-01-01

This report on the NASA-UVa light aerospace alloy and structure technology program supplement: Aluminum-Based Materials for High Speed Aircraft covers the period from July 1, 1992. The objective of the research is to develop aluminum alloys and aluminum matrix composites for the airframe which can efficiently perform in the HSCT environment for periods as long as 60,000 hours (certification for 120,000 hours) and, at the same time, meet the cost and weight requirements for an economically viable aircraft. Current industry baselines focus on flight at Mach 2.4. The research covers four major materials systems: (1) Ingot metallurgy 2XXX, 6XXX, and 8XXX alloys, (2) Powder metallurgy 2XXX alloys, (3) Rapidly solidified, dispersion strengthened Al-Fe-X alloys, and (4) Discontinuously reinforced metal matrix composites. There are ten major tasks in the program which also include evaluation and trade-off studies by Boeing and Douglas aircraft companies.

Trends in Austrian Resource Efficiency: An Exergy and Useful Work Analysis in Comparison to Material Use, CO2 Emissions, and Land Use

PubMed Central

Warr, Benjamin; Magerl, Andreas

2016-01-01

Summary In the past few years, resource use and resource efficiency have been implemented in the European Union (EU) environmental policy programs as well as international sustainable development programs. In their programs, the EU focuses on four resource types that should be addressed: materials, energy (or carbon dioxide [CO2] emissions), water, and land. In this article, we first discuss different perspectives on energy use and present the results of a long‐term exergy and useful work analysis of the Austrian economy for the period 1900–2012, using the methodology developed by Ayres and Warr. Second, we discuss Austrian resource efficiency by comparing the presented exergy and useful work data with material use, CO2 emissions, and land‐use data taken from statistical sources. This comparison provides, for the first time, a long‐term analysis of Austrian resource efficiency based on a broad understanding thereof and evaluates Austrian development in relation to EU and Austrian policy targets. PMID:29353991

Demand generation activities and modern contraceptive use in urban areas of four countries: a longitudinal evaluation.

PubMed

Speizer, Ilene S; Corroon, Meghan; Calhoun, Lisa; Lance, Peter; Montana, Livia; Nanda, Priya; Guilkey, David

2014-11-06

Family planning is crucial for preventing unintended pregnancies and for improving maternal and child health and well-being. In urban areas where there are large inequities in family planning use, particularly among the urban poor, programs are needed to increase access to and use of contraception among those most in need. This paper presents the midterm evaluation findings of the Urban Reproductive Health Initiative (Urban RH Initiative) programs, funded by the Bill & Melinda Gates Foundation, that are being implemented in 4 countries: India (Uttar Pradesh), Kenya, Nigeria, and Senegal. Between 2010 and 2013, the Measurement, Learning & Evaluation (MLE) project collected baseline and 2-year longitudinal follow-up data from women in target study cities to examine the role of demand generation activities undertaken as part of the Urban RH Initiative programs. Evaluation results demonstrate that, in each country where it was measured, outreach by community health or family planning workers as well as local radio programs were significantly associated with increased use of modern contraceptive methods. In addition, in India and Nigeria, television programs had a significant effect on modern contraceptive use, and in Kenya and Nigeria, the program slogans and materials that were blanketed across the cities (eg, leaflets/brochures distributed at health clinics and the program logo placed on all forms of materials, from market umbrellas to health facility signs and television programs) were also significantly associated with modern method use. Our results show that targeted, multilevel demand generation activities can make an important contribution to increasing modern contraceptive use in urban areas and could impact Millennium Development Goals for improved maternal and child health and access to reproductive health for all. © Speizer et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are properly cited. To view a copy of the license, visit http://creativecommons.org/licenses/by/3.0/. When linking to this article, please use the following permanent link: http://dx.doi.org/10.9745/GHSP-D-14-00109.

Guidelines for integrating population education into primary education and literacy programmes.

PubMed

1989-01-01

In recent seminars and workshops in the Asia and Pacific region the integration of population education into primary schools and literacy programs were the main topics. In most of the countries in this area separate courses in population education appear to be unfeasible for primary and secondary schools. In the nonformal area experience has indicated that population education acquires more meaning and relevance if it is integrated into an ongoing development program. The integration approach requires knowledge of the contents of the accommodating subjects or programs and knowledge of the contents of the accommodating subjects or programs and knowledge of the contents of population education. Guidelines suggested include the following steps in developing an integrated curriculum and instructional materials. First determine the needs, characteristics and other background information needed on the target group. Next prioritize the problems and needs of the target group, and formulate educational objectives from the identified needs and problems. Next determine and sequence the curriculum contents and then determine specific population education objectives and contents for integration, and what specific materials have to be developed. Then identify the specific type of format of materials to be developed, and write the first draft of the material. Also prepare illustrations and other art and graphic materials. Then the draft material should be reviewed and translated into the language of the target audience if needed. The materials should then be pretested, or field tested, using a sample of the intended users. To make sure the materials are reaching the target groups and being used effectively, a user's guide should be prepared and teachers and facilitators, as well as supervisors, should be prepared on the use of the material. In addition, a distribution and utilization plan should be prepared. Nonformal education materials can be distributed through libraries, reading center, residences of village leaders, neighborhood stores, and direct mail. The material distribution and utilization should be monitored and evaluated.

Human Reliability Program Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Landers, John; Rogers, Erin; Gerke, Gretchen

A Human Reliability Program (HRP) is designed to protect national security as well as worker and public safety by continuously evaluating the reliability of those who have access to sensitive materials, facilities, and programs. Some elements of a site HRP include systematic (1) supervisory reviews, (2) medical and psychological assessments, (3) management evaluations, (4) personnel security reviews, and (4) training of HRP staff and critical positions. Over the years of implementing an HRP, the Department of Energy (DOE) has faced various challenges and overcome obstacles. During this 4-day activity, participants will examine programs that mitigate threats to nuclear security andmore » the insider threat to include HRP, Nuclear Security Culture (NSC) Enhancement, and Employee Assistance Programs. The focus will be to develop an understanding of the need for a systematic HRP and to discuss challenges and best practices associated with mitigating the insider threat.« less

Computed gray levels in multislice and cone-beam computed tomography.

PubMed

Azeredo, Fabiane; de Menezes, Luciane Macedo; Enciso, Reyes; Weissheimer, Andre; de Oliveira, Rogério Belle

2013-07-01

Gray level is the range of shades of gray in the pixels, representing the x-ray attenuation coefficient that allows for tissue density assessments in computed tomography (CT). An in-vitro study was performed to investigate the relationship between computed gray levels in 3 cone-beam CT (CBCT) scanners and 1 multislice spiral CT device using 5 software programs. Six materials (air, water, wax, acrylic, plaster, and gutta-percha) were scanned with the CBCT and CT scanners, and the computed gray levels for each material at predetermined points were measured with OsiriX Medical Imaging software (Geneva, Switzerland), OnDemand3D (CyberMed International, Seoul, Korea), E-Film (Merge Healthcare, Milwaukee, Wis), Dolphin Imaging (Dolphin Imaging & Management Solutions, Chatsworth, Calif), and InVivo Dental Software (Anatomage, San Jose, Calif). The repeatability of these measurements was calculated with intraclass correlation coefficients, and the gray levels were averaged to represent each material. Repeated analysis of variance tests were used to assess the differences in gray levels among scanners and materials. There were no differences in mean gray levels with the different software programs. There were significant differences in gray levels between scanners for each material evaluated (P <0.001). The software programs were reliable and had no influence on the CT and CBCT gray level measurements. However, the gray levels might have discrepancies when different CT and CBCT scanners are used. Therefore, caution is essential when interpreting or evaluating CBCT images because of the significant differences in gray levels between different CBCT scanners, and between CBCT and CT values. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Programs to improve adolescent sexual and reproductive health in the US: a review of the evidence

PubMed Central

Manlove, Jennifer; Fish, Heather; Moore, Kristin Anderson

2015-01-01

Background US adolescents have high rates of teen pregnancy, childbearing, and sexually transmitted infections (STIs), highlighting the need to identify and implement effective programs that will help improve teen sexual and reproductive health. Materials and methods This review identified 103 random-assignment evaluations of 85 programs that incorporated intent-to-treat analyses and assessed impacts on pregnancy, childbearing, STIs, and their key determinants – sexual activity, number of sexual partners, condom use, and other contraceptive use – among teens. This review describes the evidence base for five broad program approaches, including abstinence education, comprehensive sex education, clinic-based programs, youth development programs, and parent–youth relationship programs. We also describe programs with impacts on key outcomes, including pregnancy/childbearing, STIs, and those that found impacts on both sexual activity and contraceptive use. Results Our review identified 52 effective programs: 38 with consistent impacts on reproductive health outcomes, and 14 with mixed findings (across subpopulations, follow-ups, or multiple measures of a single outcome). We found that a variety of program approaches produced impacts on sexual and reproductive health outcomes. Parent–youth relationship programs and clinic-based program evaluations more frequently showed impacts than other program approaches, although we also identified a number of abstinence-education, comprehensive sex education, and youth-development programs with impacts on sexual and reproductive health outcomes. Overall, we identified nine program evaluations with impacts on teen pregnancies or births, five with impacts on reducing STIs, and 15 with impacts on both delaying/reducing sexual activity and increasing contraceptive use (including condom use). Conclusion Future efforts should conduct replications of existing program evaluations, identify implementation components linked to impacts, rigorously evaluate programs that appear promising, and expand the evidence base on programs that impact hormonal and long-acting contraceptive method use. PMID:25897271

Physics Education in a Multidisciplinary Materials Research Environment

NASA Astrophysics Data System (ADS)

Doyle, W. D.

1997-03-01

The MINT Center, an NSF Materials Research Science and Engineering Center, is a multidisciplinary research program focusing on materials information storage. It involves 17 faculty, 10 post-doctoral fellows and 25 graduate students from six academic programs including Physics, Chemistry, Materials Science, Metallurgical and Materials Engineering, Electric al Engineering and Chemical Engineering, whose research is supported by university, federal and industrial funds. The research facilities (15,000 ft^2) which include faculty and student offices are located in one building and are maintained by the university and the Center at no cost to participating faculty. The academic requirements for the students are determined by the individual departments along relatively rigid, traditional grounds although several materials and device courses are offered for students from all departments. Within the Center, participants work in teams assigning responsibilities and sharing results at regularly scheduled meetings. Bi-weekly research seminars for all participants provide excellent opportunities for students to improve their communication skills and to receive critical input from a large, diverse audience. Strong collaboration with industrial partners in the storage industry supported by workshops, research reviews, internships, industrial visitors and participation in industry consortia give students a broader criteria for self-evaluation, higher motivation and excellent career opportunities. Physics students, because of their rigorous basic training, are an important element in a strong materials sciences program, but they often are deficient in the behavior and characterization of real materials. The curriculum for physics students should be broadened to prepare them fully for a rewarding career in this emerging discipline.

Potential Polymeric Sphere Construction Materials for a Spacecraft Electrostatic Shield

NASA Technical Reports Server (NTRS)

Smith, Joseph G., Jr.; Smith, Trent; Williams, Martha; Youngquist, Robert; Mendell, Wendell

2006-01-01

An electrostatic shielding concept for spacecraft radiation protection under NASA s Exploration Systems Research and Technology Program was evaluated for its effectiveness and feasibility. The proposed shield design is reminiscent of a classic quadrupole with positively and negatively charged spheres surrounding the spacecraft. The project addressed materials, shield configuration, power supply, and compared its effectiveness to that of a passive shield. The report herein concerns the identification of commercially available materials that could be used in sphere fabrication. It was found that several materials were needed to potentially construct the spheres for an electrostatic shield operating at 300 MV.

MO200: a model for evaluation safeguards through material accountability for a 200 tonne per year mixed-oxide fuel-rod fabrication plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sandborn, R.H.

1976-01-01

M0200, a computer simulation model, was used to investigate the safeguarding of plutonium dioxide. The computer program operating the model was constructed so that replicate runs could provide data for statistical analysis of the distributions of the randomized variables. The plant model was divided into material balance areas associated with definable unit processes. Indicators of plant operations studied were modified end-of-shift material balances, end-of-blend errors formed by closing material balances between blends, and cumulative sums of the differences between actual and expected performances. (auth)