The Great Margarine Meltdown.

ERIC Educational Resources Information Center

DeMoura, John M.; Darrington, Richard W.

1990-01-01

Presented is an activity in which the composition of margarine is analyzed. Materials and procedures are discussed. An extension activity on emulsions is suggested. Background information on the history of margarine is provided. (CW)

Materials Selection. Resources in Technology.

ERIC Educational Resources Information Center

Technology Teacher, 1991

1991-01-01

This learning activity develops algorithms to ensure that the process of selecting materials is well defined and sound. These procedures require the use of many databases to provide the designer with information such as physical, mechanical, and chemical properties of the materials under consideration. A design brief, student quiz, and five…

Hands-On Activities for Fourth and Fifth Graders.

ERIC Educational Resources Information Center

Ecklund, Mary C.

1990-01-01

Three activities--"Earth's Orbit and the Four Seasons,""Observing Rabbits," and "Solutes, Solvents, and Solutions"--are described. Included in each are background information, a list of materials, key questions, teacher preparation, teacher introduction, procedure, and follow-up activities. (CW)

101 Environmental Education Activities. Booklet 4--Science Activities.

ERIC Educational Resources Information Center

Whitney, Helen, Comp.

Fourth in the series "101 Environmental Education Activities" by the Upper Mississippi River ECO-Center, the booklet contains 39 environment-based science activities directed to students in primary, intermediate, and junior high classes. Organization of the activities usually includes grade level, objectives, procedures, and materials,…

Safety validation test equipment operation

NASA Astrophysics Data System (ADS)

Kurosaki, Tadaaki; Watanabe, Takashi

1992-08-01

An overview of the activities conducted on safety validation test equipment operation for materials used for NASA manned missions is presented. Safety validation tests, such as flammability, odor, offgassing, and so forth were conducted in accordance with NASA-NHB-8060.1C using test subjects common with those used by NASA, and the equipment used were qualified for their functions and performances in accordance with NASDA-CR-99124 'Safety Validation Test Qualification Procedures.' Test procedure systems were established by preparing 'Common Procedures for Safety Validation Test' as well as test procedures for flammability, offgassing, and odor tests. The test operation organization chaired by the General Manager of the Parts and Material Laboratory of NASDA (National Space Development Agency of Japan) was established, and the test leaders and operators in the organization were qualified in accordance with the specified procedures. One-hundred-one tests had been conducted so far by the Parts and Material Laboratory according to the request submitted by the manufacturers through the Space Station Group and the Safety and Product Assurance for Manned Systems Office.

Rethink, Rework, Recycle.

ERIC Educational Resources Information Center

Wrhen, Linda; DiSpezio, Michael A.

1991-01-01

Information about the recycling and reuse of plastics, aluminum, steel, glass, and newspapers is presented. The phases of recycling are described. An activity that allows students to separate recyclable materials is included. The objectives, a list of needed materials, and procedure are provided. (KR)

U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--STANDARD OPERATING PROCEDURE FOR COLLECTION OF SURFACE WIPE SAMPLES FOR PESTICIDES OR METALS ANALYSIS (UA-F-8.1)

EPA Science Inventory

The purpose of this SOP is to describe the procedures for collecting surface wipe samples inside a home for analysis of either metals or pesticides. This procedure covers the preparation of the surface wipe material and field activities. This protocol was followed to ensure con...

NHEXAS PHASE I ARIZONA STUDY--STANDARD OPERATING PROCEDURE FOR COLLECTION OF DERMAL WIPE SAMPLES FOR PESTICIDES OR METALS (UA-F-9.1)

EPA Science Inventory

The purpose of this SOP is to describe the procedures for collecting a dermal wipe sample from a participant's hands for the measurement of pesticide or metal residues on the skin. This procedure covers the preparation of the dermal wipe material and field activities. This prot...

Art Projects and Activities for the Mentally Retarded.

ERIC Educational Resources Information Center

Buffalo Public Schools, NY.

Forty-two art activities are suggested for use with mentally handicapped children. These include miscellaneous activities as well as activities appropriate to the four seasons of the year. For each activity, materials, instructional level, procedure, and variations are specified. In addition, display ideas are presented and recipes given for…

15 CFR 922.166 - Permits other than for access to the Tortugas Ecological Reserve-application procedures and...

Code of Federal Regulations, 2014 CFR

2014-01-01

... activity will involve test excavations or removal of artifacts or materials for evaluative purposes, a... of the seabed and/or the removal of artifacts or other material necessary for evaluative purposes and...

15 CFR 922.166 - Permits other than for access to the Tortugas Ecological Reserve-application procedures and...

Code of Federal Regulations, 2011 CFR

2011-01-01

... activity will involve test excavations or removal of artifacts or materials for evaluative purposes, a... of the seabed and/or the removal of artifacts or other material necessary for evaluative purposes and...

15 CFR 922.166 - Permits other than for access to the Tortugas Ecological Reserve-application procedures and...

Code of Federal Regulations, 2013 CFR

2013-01-01

... activity will involve test excavations or removal of artifacts or materials for evaluative purposes, a... of the seabed and/or the removal of artifacts or other material necessary for evaluative purposes and...

15 CFR 922.166 - Permits other than for access to the Tortugas Ecological Reserve-application procedures and...

Code of Federal Regulations, 2012 CFR

2012-01-01

... activity will involve test excavations or removal of artifacts or materials for evaluative purposes, a... of the seabed and/or the removal of artifacts or other material necessary for evaluative purposes and...

15 CFR 922.166 - Permits other than for access to the Tortugas Ecological Reserve-application procedures and...

Code of Federal Regulations, 2010 CFR

2010-01-01

... activity will involve test excavations or removal of artifacts or materials for evaluative purposes, a... of the seabed and/or the removal of artifacts or other material necessary for evaluative purposes and...

Development of a reliable estimation procedure of radioactivity inventory in a BWR plant due to neutron irradiation for decommissioning

NASA Astrophysics Data System (ADS)

Tanaka, Ken-ichi; Ueno, Jun

2017-09-01

Reliable information of radioactivity inventory resulted from the radiological characterization is important in order to plan decommissioning planning and is also crucial in order to promote decommissioning in effectiveness and in safe. The information is referred to by planning of decommissioning strategy and by an application to regulator. Reliable information of radioactivity inventory can be used to optimize the decommissioning processes. In order to perform the radiological characterization reliably, we improved a procedure of an evaluation of neutron-activated materials for a Boiling Water Reactor (BWR). Neutron-activated materials are calculated with calculation codes and their validity should be verified with measurements. The evaluation of neutron-activated materials can be divided into two processes. One is a distribution calculation of neutron-flux. Another is an activation calculation of materials. The distribution calculation of neutron-flux is performed with neutron transport calculation codes with appropriate cross section library to simulate neutron transport phenomena well. Using the distribution of neutron-flux, we perform distribution calculations of radioactivity concentration. We also estimate a time dependent distribution of radioactivity classification and a radioactive-waste classification. The information obtained from the evaluation is utilized by other tasks in the preparatory tasks to make the decommissioning plan and the activity safe and rational.

Hands-on Herps.

ERIC Educational Resources Information Center

Science Activities, 1987

1987-01-01

Presents a hands-on activity to help primary, intermediate, and advanced students learn about and compare the general characteristics of reptiles and amphibians. Suggests "herp stations" to provide experiences. Details materials, background and procedures necessary for using this activity. (CW)

Activities: Plotting and Predicting from Pairs.

ERIC Educational Resources Information Center

Shulte, Albert P.; Swift, Jim

1984-01-01

This teacher's guide provides objectives, procedures, and list of materials needed for activities which center around the use of a scatter plot to examine relationships shown by bivariate data. The activities are suitable for grades 7 to 12. Four student worksheets are included. (JN)

U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--STANDARD OPERATING PROCEDURE FOR COLLECTION OF DERMAL WIPE SAMPLES FOR PESTICIDES AND METALS ANALYSIS (UA-F-9.1)

EPA Science Inventory

The purpose of this SOP is to describe the procedures for collecting a dermal wipe sample from a participant's hands for the measurement of pesticide or metal residues on the skin. This procedure covers the preparation of the dermal wipe material and field activities. This prot...

Energy Conservation Activities for the Classroom K-12.

ERIC Educational Resources Information Center

Kentucky Dept. of Energy, Frankfort.

After a brief introduction entitled "Where Does the Energy We Use Come From," this unit presents 86 activities. Each activity gives the title, concept, objectives, subject area, level, time involved, materials needed, procedures, and related career activities. Topics cover everything from housing insulation to alternate sources of energy to energy…

In and Out 101 Activities to Enrich the Learning Experience.

ERIC Educational Resources Information Center

Johnson, Patricia; And Others

Activities developed and used with children and adults participating in the program offerings of the Edwin Gould Outdoor Education Centers are presented. Information describing most activities includes name, description of the activity, objectives, supervision or help required, procedures, time involved, size of area required, materials,…

Rivers at Risk: An Activity Based Study Guide for the Colorado River Basin.

ERIC Educational Resources Information Center

Samples, Bob, Ed.

This activity guide is intended to increase student awareness and understanding about the Colorado River Basin. Each activity includes objectives, procedures, materials list, related activities, questions for students, and related information. The activities are varied to appeal to a wide range of learning styles and modalities and are…

The Greenhouse: A Place for Year-Round Plant Investigations.

ERIC Educational Resources Information Center

Hanif, Muhammad

1989-01-01

Activities that may take place in a greenhouse are discussed. Included are learning how to grow plants, plant growth, soil, vegetative reproduction, and plant habitat adaptations. Materials, procedures, and results are presented for the activities. (CW)

33 CFR 338.2 - Activities involving the discharge of dredged or fill material into waters of the U.S.

Code of Federal Regulations, 2010 CFR

2010-07-01

... quality certifications and, if applicable, coastal zone consistency determinations. For activities which... and, if applicable, coastal zone consistency determinations should be provided using the procedures of...

33 CFR 338.2 - Activities involving the discharge of dredged or fill material into waters of the U.S.

Code of Federal Regulations, 2011 CFR

2011-07-01

... quality certifications and, if applicable, coastal zone consistency determinations. For activities which... and, if applicable, coastal zone consistency determinations should be provided using the procedures of...

Making a Submarine.

ERIC Educational Resources Information Center

Cornacchia, Deborah J.

2002-01-01

Describes Archimedes principle and why a ship sinks when it gets a hole in it. Suggests an activity for teaching the concept of density and water displacement through the construction of a simple submarine. Includes materials and procedures for this activity. (KHR)

Authentic Assessment in the Geometry Classroom: Calculating the Classroom Air-Exchange Rate.

ERIC Educational Resources Information Center

Erich, David J.

2002-01-01

Introduces a room air-exchange activity designed to assess student understanding of the concept of volume. Lists materials for the activity and its procedures. Includes the lesson plan and a student worksheet. (KHR)

Astronomy Activities.

ERIC Educational Resources Information Center

Greenstone, Sid

This document consists of activities and references for teaching astronomy. The activities (which include objectives, list of materials needed, and procedures) focus on: observing the Big Dipper and locating the North Star; examining the Big Dipper's stars; making and using an astrolabe; examining retograde motion of Mars; measuring the Sun's…

Acid Rain: Science Projects.

ERIC Educational Resources Information Center

Stubbs, Harriett S.

1989-01-01

Presented is a science activity designed to help students monitor the pH of rainfall. Materials, procedures and follow-up activities are listed. A list of domestic and foreign sources of information is provided. Topics which relate to acid precipitation are outlined. (CW)

How-to-Do-It: Hands-on Activities that Relate Mendelian Genetics to Cell Division.

ERIC Educational Resources Information Center

McKean, Heather R.; Gibson, Linda S.

1989-01-01

Presented is an activity designed to connect Mendelian laws with the physical processes of cell division. Included are materials production, procedures and worksheets for the meiosis-mitosis game and a genetics game. (CW)

Acid Rain Classroom Projects.

ERIC Educational Resources Information Center

Demchik, Michael J.

2000-01-01

Describes a curriculum plan in which students learn about acid rain through instructional media, research and class presentations, lab activities, simulations, design, and design implementation. Describes the simulation activity in detail and includes materials, procedures, instructions, examples, results, and discussion sections. (SAH)

Synthesis of aircraft structures using integrated design and analysis methods

NASA Technical Reports Server (NTRS)

Sobieszczanski-Sobieski, J.; Goetz, R. C.

1978-01-01

A systematic research is reported to develop and validate methods for structural sizing of an airframe designed with the use of composite materials and active controls. This research program includes procedures for computing aeroelastic loads, static and dynamic aeroelasticity, analysis and synthesis of active controls, and optimization techniques. Development of the methods is concerned with the most effective ways of integrating and sequencing the procedures in order to generate structural sizing and the associated active control system, which is optimal with respect to a given merit function constrained by strength and aeroelasticity requirements.

IFCC primary reference procedures for the measurement of catalytic activity concentrations of enzymes at 37 °C. Part 9: reference procedure for the measurement of catalytic concentration of alkaline phosphatase International Federation of Clinical Chemistry and Laboratory Medicine (IFCC) Scientific Division, Committee on Reference Systems of Enzymes (C-RSE) (1)).

PubMed

Schumann, Gerhard; Klauke, Rainer; Canalias, Francesca; Bossert-Reuther, Steffen; Franck, Paul F H; Gella, F-Javier; Jørgensen, Poul J; Kang, Dongchon; Lessinger, Jean-Marc; Panteghini, Mauro; Ceriotti, Ferruccio

2011-09-01

Abstract This paper is the ninth in a series dealing with reference procedures for the measurement of catalytic activity concentrations of enzymes at 37 °C and the certification of reference preparations. Other parts deal with: Part 1. The concept of reference procedures for the measurement of catalytic activity concentrations of enzymes; Part 2. Reference procedure for the measurement of catalytic concentration of creatine kinase; Part 3. Reference procedure for the measurement of catalytic concentration of lactate dehydrogenase; Part 4. Reference procedure for the measurement of catalytic concentration of alanine aminotransferase; Part 5. Reference procedure for the measurement of catalytic concentration of aspartate aminotransferase; Part 6. Reference procedure for the measurement of catalytic concentration of γ-glutamyltransferase; Part 7. Certification of four reference materials for the determination of enzymatic activity of γ-glutamyltransferase, lactate dehydrogenase, alanine aminotransferase and creatine kinase at 37 °C; Part 8. Reference procedure for the measurement of catalytic concentration of α-amylase. The procedure described here is derived from the previously described 30 °C IFCC reference method. Differences are tabulated and commented on in Appendix 1.

Energy and Safety: Science Activities for Elementary Students, Level III (Grades (5-6).

ERIC Educational Resources Information Center

Westcott, Dale; And Others

Thirteen activities are presented that focus on a common phenomenon of a child's world: energy. These activities relate energy, how it occurs, how it is used, and how to use it safely. Each activity includes the purpose, introduction, background, procedure, materials, estimated time for the activity, typical results, safety notes, and more ideas.…

The Market Linkage Project for Special Education: A Project Update.

ERIC Educational Resources Information Center

Bulford, Sally; Daniels, Carol

1982-01-01

The procedure for marketing special education materials developed by government money is detailed, and the array of technical assistance activities offered by LINC Resources is described. Material criteria is considered in terms of such aspects as timeliness, target audiences, effectiveness data, and product format. (CL)

Small Schools Curriculum: Physical Education, K-6.

ERIC Educational Resources Information Center

Hartl, David, Ed.; Hartl, Doris, Ed.

The self-contained sections within the document (one for grades K-3, the other for grades 4-6) present objectives, activities, monitoring procedures and resources for the elementary physical education curriculum for Washington small school districts. Identical introductory materials describe the organization of Small Schools materials,…

Penetrating School Strata Through Career Education (Grades 7 and 8).

ERIC Educational Resources Information Center

Bristol Public Schools, CT.

The career education curriculum guide for grades seven and eight contains activities that can be integrated with existing curriculum. For each activity, career education objectives are cited together with goals, materials, procedures, anticipated results, and evaluation. Career education activities are presented in the following areas: art,…

Aviation Science Activities for Elementary Grades. Revised.

ERIC Educational Resources Information Center

Federal Aviation Administration (DOT), Washington, DC.

This guide contains the procedures and lists of materials needed for 105 aviation activities, demonstrations, and experiments. These activities, demonstrations, and experiments (suitable for students in all elementary grades) are organized into three sections by major topic area: (1) properties of air; (2) factors related to airplane flight; and…

Bubbles: Films, Foams & Fizz. Ideas in Science. Notes for Teachers.

ERIC Educational Resources Information Center

Murphy, Pat, Ed.

Five activities dealing with bubbles are presented. Information provided with the activities includes introductory and/or background information; notes on pre-activity preparations; lists of science themes and skills fostered; time frame; list of materials needed; student procedures; and instructional strategies. A teaching guide with detailed…

Classroom Demonstrations of Wood Properties.

ERIC Educational Resources Information Center

Foulger, A. N.

Presented in this manual are 20 activities selected to show some of the properties of wood and how these properties relate to the cellular structure of wood. Each activity includes stated objectives, indicates materials needed, and explains procedures. Illustrations related to the activities, glossary of terms, and photographs of wood structure…

Integration of Metal Oxide Nanowires in Flexible Gas Sensing Devices

PubMed Central

Comini, Elisabetta

2013-01-01

Metal oxide nanowires are very promising active materials for different applications, especially in the field of gas sensors. Advances in fabrication technologies now allow the preparation of nanowires on flexible substrates, expanding the potential market of the resulting sensors. The critical steps for the large-scale preparation of reliable sensing devices are the elimination of high temperatures processes and the stretchability of the entire final device, including the active material. Direct growth on flexible substrates and post-growth procedures have been successfully used for the preparation of gas sensors. The paper will summarize the procedures used for the preparation of flexible and wearable gas sensors prototypes with an overlook of the challenges and the future perspectives concerning this field. PMID:23955436

For the Classroom: "Plastic" Jellyfish.

ERIC Educational Resources Information Center

Current: The Journal of Marine Education, 1989

1989-01-01

Describes an activity in which students monitor the plastic waste production in their households, research its effects on freshwater and marine life, and propose ways to lessen the problem. Provides objectives, background information, materials, procedures, extension activities, and an evaluation for students. (Author/RT)

Fossil Simulation in the Classroom

ERIC Educational Resources Information Center

Hoehn, Robert G.

1977-01-01

Describes classroom science demonstrations and experiments that simulate the process of fossil formation. Lists materials, procedures and suggestions for successful activities. Includes ten student activities (coral fossils, leaf fossils, leaf scars, carbonization, etc.). Describes a fossil game in which students work in pairs. (CS)

Family Life.

ERIC Educational Resources Information Center

NatureScope, 1985

1985-01-01

Provides background information and student activities on bird nesting, singing, finding a mate, incubating eggs, and raising the young. Each activity includes an objective, recommended age level(s), subject area(s), list of materials needed, and procedures. A ready-to-copy student worksheet is included. (JN)

High School Law Awareness Curriculum Guide, 1980.

ERIC Educational Resources Information Center

Seminole County Board of Public Instruction, Sanford, FL.

Instructional materials, activities, and lesson plans used to teach high school students about the law, the legal process, and the legal system are presented. The materials are intended to be incorporated into the U.S. history curriculum. The following topics are covered: procedure for trial simulation; the Boston Massacre; the debate over…

Resource Material Developed for Secondary Education: 18 Booklets.

ERIC Educational Resources Information Center

Oatland Island Education Center, Savannah, GA.

Each Learning Activity Packet in this series delineates performance objectives, procedures, materials, and references. Some also contain pre- and post-tests. They are primarily intended for the secondary level. The topics are: (1) Noise Pollution; (2) Georgia Ports Authority: Its Environmental Impact; (3) Environmental Experiencing; (4) Me in My…

Chemistry For Kids: Pre-Chemistry Acid Rain Activities for Kids.

ERIC Educational Resources Information Center

Barrow, Lloyd H.

1985-01-01

Presents two activities on acid rain for students in intermediate grades. Materials needed and procedures used are included. Also describes "chemical magic" shows performed by high school students for sixth-grade students in seven elementary schools in Altus, Oklahoma. (JN)

Plants of the Desert.

ERIC Educational Resources Information Center

NatureScope, 1985

1985-01-01

Provides background information and student activities on plants of the desert, including various adaptations for life with limited water supplies. Each activity includes objective(s), recommended age level(s), subject area(s), list of materials needed, and procedures. A ready-to-copy student worksheet is included. (DH)

Color Me Metamorphic.

ERIC Educational Resources Information Center

Birdd, Donald L.

1990-01-01

Described are five activities using crayons to demonstrate the rock cycle including weathering, erosion and sedimentation, and sedimentary, metamorphic, and igneous rock formation. Discussed are materials, procedures, and probable results. (CW)

Material Property Characterization of Potential Nanocarbon Metal-Matrix Composite: An Investigational Study

NASA Astrophysics Data System (ADS)

Zavala, Mitchel

Metal-matrix composites (MMCs) are engineered combinations of two or more materials. Tailored properties are achieved by systematic combinations of different constituents. Specialized design and synthesis procedures allow unique sets of material properties in composites. Covetics are a new type of metal-matrix nano-composite (MMnC) material. These materials are formed from FCC metals which are super-saturated with up to 10 wt. % of activated nano-carbon powder. The idea is that the nano-carbon particles will enhance the material properties of the base metal matrix, however most of the physical and mechanical properties of covetics have not been well characterized. The foci of this study are to optimize the covetic casting synthesis process under controlled conditions, to understand and analyze the microstructures of the synthesized copper and aluminum covetic, to provide a thorough analysis of the chemical composition of the synthesized covetic materials, and to characterize physical and mechanical properties of both of these materials using meticulously prepared samples and test procedures.

Metrology conditions for thin layer activation in wear and corrosion studies

NASA Astrophysics Data System (ADS)

Lacroix, O.; Sauvage, T.; Blondiaux, G.; Racolta, P. M.; Popa-Simil, L.; Alexandreanu, B.

1996-02-01

Thin Layer Activation (TLA) is an ion beam technique. This method consists of an accelerated ion bombardment of the surface of interest of a machine part subjected to wear. Radioactive tracers are created by nuclear reactions in a well defined volume of material. Loss of material owing to wear, corrosion or abrasion phenomena is characterized by monitoring the resulting changes in radioactivity. For the industrial application of this method, special attention has been paid during irradiation to the range of activated thickness, yields and activation homogeneity and to on-line radioactivity measurements. There are two basic methods for measuring the material loss by TLA technique. One of them is based on remanant radioactivity measurements using a previously obtained calibration curve. The second is based on measuring the increasing radioactivity in the lubricant due to suspended wear particles. In this paper, we have chosen to present some calibration curves for both proton and deuteron irradiation of Fe, Cr, Cu, Ti and Ni samples. Thickness ranges are indicated and intrinsic error checking and calculational procedures are also presented. The article ends with a review of some typical experiments involving running-in programme optimization and lubricants certifying procedures.

DETECTION OF BACTERIAL CYTOTOXIC ACTIVITIES FROM WATER-DAMAGED CEILING TILE MATERIAL FOLLOWING INCUBATION ON BLOOD AGAR

EPA Science Inventory

Samples of ceiling tiles with high levels of bacteria exhibited cytotoxic activities on a HEP-2 tissue culture assay. Ceiling tiles containing low levels of bacterial colonization did not show cytotoxic activities on the HEP-2 tissue culture assay. Using a spread plate procedure ...

Active thermography in qualitative evaluation of protective materials.

PubMed

Gralewicz, Grzegorz; Wiecek, Bogusław

2009-01-01

This is a study of the possibilities of a qualitative evaluation of protective materials with active thermography. It presents a simulation of a periodic excitation of a multilayer composite material. Tests were conducted with lock-in thermography on Kevlar composite consisting of 16 layers of Kevlar fabric reinforced with formaldehyde resin with implanted delamination defects. Lock-in thermography is a versatile tool for nondestructive evaluation. It is a fast, remote and nondestructive procedure. Hence, it was used to detect delaminations in the composite structure of materials used in the production of components designed for personal protection. This method directly contributes to an improvement in safety.

Cobalt- and iron-based nanoparticles hosted in SBA-15 mesoporous silica and activated carbon from biomass: Effect of modification procedure

NASA Astrophysics Data System (ADS)

Tsoncheva, Tanya; Genova, Izabela; Paneva, Daniela; Dimitrov, Momtchil; Tsyntsarski, Boyko; Velinov, Nicolay; Ivanova, Radostina; Issa, Gloria; Kovacheva, Daniela; Budinova, Temenujka; Mitov, Ivan; Petrov, Narzislav

2015-10-01

Ordered mesoporous silica of SBA-15 type and activated carbon, prepared from waste biomass (peach stones), are used as host matrix of nanosized iron and cobalt particles. The effect of preparation procedure on the state of loaded nanoparticles is in the focus of investigation. The obtained materials are characterized by Boehm method, low temperature physisorption of nitrogen, XRD, UV-Vis, FTIR, Mossbauer spectroscopy and temperature programmed reduction with hydrogen. The catalytic behaviour of the samples is tested in methanol decomposition. The dispersion, oxidative state and catalytic behaviour of loaded cobalt and iron nanoparticles are successfully tuned both by the nature of porous support and the metal precursor used during the samples preparation. Facile effect of active phase deposition from aqueous solution of nitrate precursors is assumed for activated carbon support. For the silica based materials the catalytic activity could be significantly improved when cobalt acetylacetonate is used during the modification. The complex effect of pore topology and surface functionality of different supports on the active phase formation is discussed.

Children of War. [Lesson Plan].

ERIC Educational Resources Information Center

Discovery Communications, Inc., Bethesda, MD.

This lesson plan presents activities in which students read, analyze, and discuss excerpts from children's war diaries; and create a storyboard for a public service announcement on children's rights in wartime. It includes objectives, materials, procedures, extension activities, excerpts of children's war diaries, suggested readings, and web…

Get Cracking.

ERIC Educational Resources Information Center

Croll, Doreen A.

1986-01-01

Presents a diversity of concrete experiences that can be used with eggs for young elementary age students. Includes procedures and material list for several activities that are hands-on and interdisciplinary in nature. (ML)

Overhead Projector Demonstrations.

ERIC Educational Resources Information Center

Kolb, Doris, Ed.

1989-01-01

Described are demonstrations of the optical activity of two sugar solutions, and the effects of various substituents on acid strength using an overhead projector. Materials and procedures for each demonstration are discussed. (CW)

32 CFR 245.5 - Terms.

Code of Federal Regulations, 2014 CFR

2014-07-01

... an opposing military force; or (2) Results in the call or order to, or retention on, active duty of... and services; rules, regulations and procedures, technical information, and manpower and material...

32 CFR 245.5 - Terms.

Code of Federal Regulations, 2013 CFR

2013-07-01

... an opposing military force; or (2) Results in the call or order to, or retention on, active duty of... and services; rules, regulations and procedures, technical information, and manpower and material...

32 CFR 245.5 - Terms.

Code of Federal Regulations, 2012 CFR

2012-07-01

... an opposing military force; or (2) Results in the call or order to, or retention on, active duty of... and services; rules, regulations and procedures, technical information, and manpower and material...

32 CFR 245.5 - Terms.

Code of Federal Regulations, 2011 CFR

2011-07-01

... an opposing military force; or (2) Results in the call or order to, or retention on, active duty of... and services; rules, regulations and procedures, technical information, and manpower and material...

32 CFR 245.5 - Terms.

Code of Federal Regulations, 2010 CFR

2010-07-01

... an opposing military force; or (2) Results in the call or order to, or retention on, active duty of... and services; rules, regulations and procedures, technical information, and manpower and material...

What Makes the Fizz?

ERIC Educational Resources Information Center

Shimkanin, John

1995-01-01

Presents an activity to answer the question, "What makes soda pop fizz?". Lists necessary materials and describes the procedure for making soda pop. Discusses the fermentation process and how it occurs. (NB)

How to Fill Your Toy Shelves Without Emptying Your Pocketbook: 70 Inexpensive Things to Do or Make.

ERIC Educational Resources Information Center

Southwest Educational Development Lab., Austin, TX.

Designed for parents and teachers, the manual contains suggestions for approximately 70 inexpensively constructed games, activities, and manipulative materials for use with handicapped and non handicapped young children. Suggested are procedures for conducting materials workshops for parents and teachers. Instructions are provided for items…

Don't Guess About Drugs When You Can Have the Facts.

ERIC Educational Resources Information Center

National Inst. of Mental Health (DHEW), Bethesda, MD.

This catalogue serves two purposes. First, it outlines the general activities and materials in the National Institute of Mental Health anti-drug campaign. Second, it serves as an order form for materials that are currently available and describes the special procedures which have been established to facilitate distribution. Both radio and…

Authentic Listening Materials: ESL Life Skills Training.

ERIC Educational Resources Information Center

Smith, Beverly J.

This guide is designed for use in providing English-as-a-second-language training to adults. The first part of the package describes the development of these materials during a project to provide training in conversational English to refugees and migrants. Outlined next are procedures and activities for assessing student needs, taping student…

Twenty Activities to Expand Your Students' Knowledge of the World While Studying Your State. A Global Perspectives Experimental Unit.

ERIC Educational Resources Information Center

Cleveland, Alice Ann; Lewis, Nancy G.

This unit contains 20 classroom activities which have a global approach and will enable junior or high school students to learn about their state and the world. Student materials and teaching procedures are provided for each activity. Some examples of the activities follow. In one activity students compare the size of New Mexico with another area…

Determining Enzyme Activity by Radial Diffusion

ERIC Educational Resources Information Center

Davis, Bill D.

1977-01-01

Discusses advantages of radial diffusion assay in determining presence of enzyme and/or rough approximation of amount of enzyme activities. Procedures are included for the preparation of starch-agar plates, and the application and determination of enzyme. Techniques using plant materials (homogenates, tissues, ungerminated embryos, and seedlings)…

Low Budget Biology: Genetics Unit.

ERIC Educational Resources Information Center

Wartski, Bert; Wartski, Lynn Marie

Some concepts in genetics are difficult for many students to understand. This document provides hands-on, cost efficient, fun activities for students to help them better understand abstract concepts in genetics. Each activity includes: purpose, introduction, materials, procedures, results and conclusion. Some of the topics explored are: (1)…

Intrinsic Remediation Engineering Evaluation/Cost Analysis for Car Care Center at Bolling Air Force Base, Washington, DC

DTIC Science & Technology

1997-01-01

supplemented using established literature values for similar aquifer materials . The groundwater sampling activities and analytical results from both...subsurface materials recovered. Observed soil classification types compared very favorably to the soil classifications determined by the CPT tests. 0 2.1.5...other similar substances were handled in a manner consistent with accepted safety procedures and standard operating practices. Well completion materials

Performance assessment of solid state actuators through a common procedure and comparison criteria

NASA Astrophysics Data System (ADS)

Reithler, Livier; Guedra-Degeorges, Didier

1998-07-01

The design of systems based on smart structure technologies for active shape and vibration control and high precision positioning requires a good knowledge of the behavior of the active materials (electrostrictive and piezoelectric ceramics and polymers, magnetostrictive and shape memory alloys...) and of commercially available actuators. Extensive theoretical studies have been made on the behavior of active materials during the past decades but there are only a few developments on experimental comparisons between different kinds of commercially available actuators. The purpose of this study is to find out the pertinent parameters for the design of such systems, to set up a common static test procedure for all types of actuators and to define comparison criteria in terms of output force and displacement, mechanical and electrical energy, mass and dimensions. After having define the pertinent parameters of the characterization and having described the resulting testing procedure, test results are presented for different types of actuators based on piezoceramics and magnetostrictive alloys. The performances of each actuator are compared through both the test results and the announced characteristics: to perform this comparison absolute and relative criteria are chosen considering aeronautical and space applications.

Effectiveness of Sonic, Ultrasonic, and Photon-Induced Photoacoustic Streaming Activation of NaOCl on Filling Material Removal Following Retreatment in Oval Canal Anatomy.

PubMed

Jiang, Shan; Zou, Ting; Li, Dongxia; Chang, Jeffery W W; Huang, Xiaojing; Zhang, Chengfei

2016-01-01

This study aimed to assess the effectiveness of sonic, ultrasonic and laser [photon-induced photoacoustic streaming (PIPS)] irrigation activation in removing filling remnants from oval root canals after standard canal retreatment procedures with the ProTaper universal rotary retreatment system. Twenty-eight maxillary first premolars were instrumented with ProTaper NiTi rotary instruments and obturated with gutta-percha and AH Plus sealer using the continuous wave of condensation technique. After storage at 37°C and 100% humidity for 1 week, the specimens were retreated with the ProTaper universal retreatment system for the removal of filling material. Teeth were then randomly assigned into four groups (n = 7): group 1, positive control; group 2, retreated with sonic irrigation; group 3, retreated with ultrasonic irrigation; and group 4, retreated with laser irradiation. The specimens were scanned using micro-CT before instrumentation, after obturation and mechanical retreatment, and after additional activation procedures. The percentage volume of the filling remnants was measured. Specimens were split longitudinally after micro-CT scan, canal walls were examined using scanning electron microscopy (SEM), and the amount of residual filling material was scored. The filling materials' removal efficacy in the three experimental groups was higher than that of the control group (p < 0.05), whereas filling materials ranging from 1.46 ± 0.30 to 2.21 ± 0.46 mm(3) remained in the canal in all three experimental groups. Additionally, there was a significantly greater reduction in the amount of filling remnants in the PIPS group than in the sonic and ultrasonic groups (both p < 0.05), and significantly greater reduction in the ultrasonic group than the sonic group (p < 0.05). Activation of NaOCl with PIPS showed significantly better performance than sonic and ultrasonic techniques in removing the filling remnants following mechanical retreatment of oval root canals. The ultrasonic technique also performed better than the sonic technique. However, none of the additional activation procedures was able to completely eliminate the filling remnants.

3...2...1...Liftoff!: An Educator's Guide with Activities in Science, Mathematics, Technology, and Language Arts.

ERIC Educational Resources Information Center

National Aeronautics and Space Administration, Washington, DC.

This curriculum supplement introduces students in the early childhood classroom to the International Space Station and the role rockets play in its construction. The guide uses these topics as the basis for interdisciplinary activities for the early learner. Each activity features objectives, a material list, educator information, procedures, and…

Battery Separator Characterization and Evaluation Procedures for NASA's Advanced Lithium-Ion Batteries

NASA Technical Reports Server (NTRS)

Baldwin, Richard S.; Bennet, William R.; Wong, Eunice K.; Lewton, MaryBeth R.; Harris, Megan K.

2010-01-01

To address the future performance and safety requirements for the electrical energy storage technologies that will enhance and enable future NASA manned aerospace missions, advanced rechargeable, lithium-ion battery technology development is being pursued within the scope of the NASA Exploration Technology Development Program s (ETDP's) Energy Storage Project. A critical cell-level component of a lithium-ion battery which significantly impacts both overall electrochemical performance and safety is the porous separator that is sandwiched between the two active cell electrodes. To support the selection of the optimal cell separator material(s) for the advanced battery technology and chemistries under development, laboratory characterization and screening procedures were established to assess and compare separator material-level attributes and associated separator performance characteristics.

Crafty Corner.

ERIC Educational Resources Information Center

NatureScope, 1985

1985-01-01

Presents lists of materials needed and procedures to build a collection of dinosaurs using different sized boxes, build life-sized dinosaur bones using paper-mache and chicken wire, make paper dinosaur stickers, and make dinosaur pop-up cards. These arts/crafts activities can be used to complement activities in science and other subjects. (JN)

Tin Can Racer Derby.

ERIC Educational Resources Information Center

Milson, James L.

1986-01-01

Describes directions for constructing "racing" cars out of simple materials like spools and coffee cans. Discusses procedures for students to build cars, then to test and race them. Stresses that the activity allows for self-discovery of problem solving techniques and opportunities to discuss the scientific concepts related to the activity. (TW)

What Makes a Tree a Tree?

ERIC Educational Resources Information Center

NatureScope, 1986

1986-01-01

Provides: (1) background information on trees, focusing on the parts of trees and how they differ from other plants; (2) eight activities; and (3) ready-to-copy pages dealing with tree identification and tree rings. Activities include objective(s), recommended age level(s), subject area(s), list of materials needed, and procedures. (JN)

Incorporating Writing into the Science Curriculum: A Sample Activity.

ERIC Educational Resources Information Center

Totten, Samuel; Tinnin, Claire

1988-01-01

Presents a lesson on introducing writing into the science curriculum by using an experiment to illustrate the detrimental effect of tobacco smoke on human lungs. Outlines the materials, procedures, a summary of the project, extension activities, and additional information about the writing process. Two handout sheets are included. (RT)

Art Teaching Guides: Painting. Kindergarten-Grade 6. Curriculum Bulletin. No. 8 g. 1968-69 Series.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Div. of Curriculum and Instruction.

Growth in painting ability is dependent on frequent painting experiences, on thoughtful motivation, and on proper guidance and evaluation of progress. This guide includes materials and equipment, motivation, guidance procedures, activities, and evaluation for each grade level. A working space with materials and equipment in the classroom needs to…

Optimized in vitro procedure for assessing the cytocompatibility of magnesium-based biomaterials.

PubMed

Jung, Ole; Smeets, Ralf; Porchetta, Dario; Kopp, Alexander; Ptock, Christoph; Müller, Ute; Heiland, Max; Schwade, Max; Behr, Björn; Kröger, Nadja; Kluwe, Lan; Hanken, Henning; Hartjen, Philip

2015-09-01

Magnesium (Mg) is a promising biomaterial for degradable implant applications that has been extensively studied in vitro and in vivo in recent years. In this study, we developed a procedure that allows an optimized and uniform in vitro assessment of the cytocompatibility of Mg-based materials while respecting the standard protocol DIN EN ISO 10993-5:2009. The mouse fibroblast line L-929 was chosen as the preferred assay cell line and MEM supplemented with 10% FCS, penicillin/streptomycin and 4mM l-glutamine as the favored assay medium. The procedure consists of (1) an indirect assessment of effects of soluble Mg corrosion products in material extracts and (2) a direct assessment of the surface compatibility in terms of cell attachment and cytotoxicity originating from active corrosion processes. The indirect assessment allows the quantification of cell-proliferation (BrdU-assay), viability (XTT-assay) as well as cytotoxicity (LDH-assay) of the mouse fibroblasts incubated with material extracts. Direct assessment visualizes cells attached to the test materials by means of live-dead staining. The colorimetric assays and the visual evaluation complement each other and the combination of both provides an optimized and simple procedure for assessing the cytocompatibility of Mg-based biomaterials in vitro. Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Modification of Rhodamine WT tracer tests procedure in activated sludge reactors

NASA Astrophysics Data System (ADS)

Knap, Marta; Balbierz, Piotr

2017-11-01

One of the tracers recommended for use in wastewater treatment plants and natural waters is Rhodamine WT, which is a fluorescent dye, allowing to work at low concentrations, but may be susceptible to sorption to activated sludge flocs and chemical quenching of fluorescence by dissolved water constituents. Additionally raw sewage may contain other natural materials or pollutants exhibiting limited fluorescent properties, which are responsible for background fluorescence interference. This paper presents the proposed modifications to the Rhodamine WT tracer tests procedure in activated sludge reactors, which allow to reduce problems with background fluorescence and tracer loss over time, developed on the basis of conducted laboratory and field experiments.

Science Notes.

ERIC Educational Resources Information Center

School Science Review, 1985

1985-01-01

Presents 23 experiments, activities, field projects and computer programs in the biological and physical sciences. Instructional procedures, experimental designs, materials, and background information are suggested. Topics include fluid mechanics, electricity, crystals, arthropods, limpets, acid neutralization, and software evaluation. (ML)

Biology Notes.

ERIC Educational Resources Information Center

School Science Review, 1982

1982-01-01

Describes laboratory procedures, demonstrations, and classroom activities/materials, including rapid peat-depth surveying; leaf-flotation method for measuring photosynthesis, an educational game demonstrating basis of protein synthesis, daffodil phototropism; chromatography apparatus; egg white digestion, and chromatography apparatus. Also…

Chemistry Notes.

ERIC Educational Resources Information Center

School Science Review, 1983

1983-01-01

Presents background information, laboratory procedures, classroom materials/activities, and chemistry experiments. Topics include sublimation, electronegativity, electrolysis, experimental aspects of strontianite, halide test, evaluation of present and future computer programs in chemistry, formula building, care of glass/saturated calomel…

Water: A Recycling Success Story.

ERIC Educational Resources Information Center

Swinehart, Rebecca, Ed.

1995-01-01

This activity involves elementary students in simulating water purification techniques by finding ways to clear up soapy water. An introduction discusses water use and conservation. Materials needed and step-by-step procedure are provided. (LZ)

For Better Soil, Let Earthworms Toil.

ERIC Educational Resources Information Center

Swinehart, Rebecca, Ed.

1995-01-01

This activity involves elementary students in investigating how earthworms affect soil fertility. An introduction discusses topsoil loss and the connections between soil and earthworm ecology. Materials needed and step-by-step procedure are provided. (LZ)

Southeastern superpave center pooled-fund activities.

DOT National Transportation Integrated Search

2010-02-01

Much has been learned about materials characteristics, testing procedures, new equipment, mix design, and pavement performance through the many studies conducted as a part of the Southeastern Superpave Center (SSC) pooled-fund program. Lessons learne...

SSMiles.

ERIC Educational Resources Information Center

Tracy, Dyanne M., Ed.

1993-01-01

Presents five integrated mathematics and science lessons in which students investigate the characteristics, behavior, lifecycles, and motion of mealworms and the feasibility of raising mealworms for profit. Purpose, time, materials needed, procedures, and extensions for each activity are provided. (MDH)

Measuring water potential (activity) from free water to oven dryness.

PubMed

Wiebe, H H

1981-12-01

Water activities (potentials) in plant materials were measured over the range from free water to oven dryness with a Spanner thermocouple psychrometer. In a two-step procedure, water was first condensed on the thermocouple junction for several minutes. The sample was then inserted under the wet thermocouple and the maximum psychrometric cooling was measured in about 10 seconds. Calibration was with saturated salt slurries of known water activities. Psychrometric cooling was a nearly linear function of the water activity and of the negative log of the water potential. The psychrometric cooling to water activity relationship agreed with wetbulb temperature depression to relative humidity relationships given in tables. Water activities of wheat grains and leaves decreased sharply in a curvilinear fashion as their water contents decreased. Some problems of the procedure are discussed.

Management of Naturally Occurring Radioactive Materials (NORM) in Canada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baweja, Anar S.; Tracy, Bliss L.

2008-08-07

In Canada, nuclear and radiological regulatory responsibilities are shared between the provinces/territories and the federal government. The Canadian Nuclear Safety Commission (CNSC) regulates nuclear fuel cycle materials and man-made radionuclides under the Nuclear Safety and Control Act (2000). The provinces and territories regulate NORM arising from industrial activities, not involving the nuclear fuel cycle materials. Present guideline--Canadian Guidelines for the Management of Naturally Occurring Radioactive Materials (NORM)--was published in 2000 in order to bring uniformity to the management of NORM-related procedures to provide adequate radiation protection for workers and the general public. The basic premise of these guidelines is thatmore » the NORM-related activities should not be posing any greater hazard than those activities regulated under the Nuclear Safety and Control Act; these concepts are described in this paper.« less

Capacity loss on storage and possible capacity recovery for HST nickel-hydrogen cells

NASA Technical Reports Server (NTRS)

Lowery, John E.

1992-01-01

Negatively precharged nickel hydrogen cells will experience a useable capacity loss during extended open circuit storage periods. Some of the lost capacity can be recovered through cycling. Capacity recovery through cycling can be enhanced by cycling at high depths of discharge (DOD). The most timely procedure for recovering the faded capacity is to charge the cell fully and allow the cell to sit open-circuit at room temperature. This procedure seems to be effective in part because of the enlarged structure of the active materials. The compounds that formed during storage at the low electrode potentials can more easily dissolve and redistribute. All of the original capacity cannot be recovered because the lattice structure of the active material is irreversibly altered during storage. The recommendation is to use positively precharged cells activated with 26 percent KOH if possible. In aerospace applications, the benefits of negative precharge are offset by the possibility of delays and storage periods.

Computer-aided design and manufacture of hyrax devices: Can we really go digital?

PubMed

Graf, Simon; Cornelis, Marie A; Hauber Gameiro, Gustavo; Cattaneo, Paolo M

2017-12-01

The aim of this pilot study was to illustrate the feasibility of a new digital procedure to fabricate metallic orthodontic appliances. Hyrax appliances for rapid palatal expansion were produced for 3 patients using a CAD/CAM procedure without physical impressions or printed models. The work flow consisted of intraoral scanning, digital design with incorporation of a scanned prefabricated expansion screw, direct 3-dimensional metal printing via laser melting, welding of an expansion screw, insertion, and finally activation in the patients' mouths. Finite element analyses of the actual hyrax appliances were performed to ensure that the printable material used in combination with the chosen design would withstand the stress generated during activation. The results of these analyses were positive. The clinical results showed that this procedure is an efficient and viable digital way for constructing metallic orthodontic appliances. The flexibility of the digital appliance design, together with the biocompatibility and strength of the chosen material, offers a huge potential for more advanced appliance design. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Chemistry Notes.

ERIC Educational Resources Information Center

School Science Review, 1983

1983-01-01

Presents chemistry experiments, laboratory procedures, demonstrations, teaching suggestions, and classroom materials/activities. These include: game for teaching ionic formulas; method for balancing equations; description of useful redox series; computer programs (with listings) for water electrolysis simulation and for determining chemical…

Colorful Chemistry.

ERIC Educational Resources Information Center

Williams, Suzanne

1991-01-01

Described is an color-making activity where students use food coloring, eyedroppers, and water to make various colored solutions. Included are the needed materials and procedures. Students are asked to write up the formulas for making their favorite color. (KR)

10 CFR 73.25 - Performance capabilities for physical protection of strategic special nuclear material in transit.

Code of Federal Regulations, 2012 CFR

2012-01-01

... tampering with transports and cargo containers; and (iii) Surveillance subsystems and procedures to detect... to establish activities for transferring cargo in emergency situations; and (iii) Removal controls...

10 CFR 73.25 - Performance capabilities for physical protection of strategic special nuclear material in transit.

Code of Federal Regulations, 2011 CFR

2011-01-01

... tampering with transports and cargo containers; and (iii) Surveillance subsystems and procedures to detect... to establish activities for transferring cargo in emergency situations; and (iii) Removal controls...

Chemistry Notes.

ERIC Educational Resources Information Center

School Science Review, 1982

1982-01-01

Presents background information, laboratory procedures, classroom materials/activities, and experiments for chemistry. Topics include superheavy elements, polarizing power and chemistry of alkali metals, particulate carbon from combustion, tips for the chemistry laboratory, interesting/colorful experiments, behavior of bismuth (III) iodine, and…

Effect of biomaterials on angiogenesis during vital pulp therapy

PubMed Central

SAGHIRI, Mohammad Ali; ASATOURIAN, Armen; GARCIA-GODOY, Franklin; SHEIBANI, Nader

2016-01-01

This review intended to provide an overview of the effects of dental materials, used in dentin-pulp complex and dental pulp regeneration, on angiogenesis processes during regenerative endodontic procedures. An electronic search was performed in PubMed and MEDLINE databases via OVID using the keywords mentioned in the PubMed and MeSH headings for English language published articles from January 2005–April 2014 that evaluated the angiogenic properties of different dental materials used in regenerative endodontic procedures. Of the articles identified in an initial search, only 40 articles met the inclusion criteria set for this review. Vital pulp therapy materials might have positive effects on angiogenesis events, while most of the canal irrigating solutions and antibiotic pastes have anti-angiogenic activity except for EDTA. Future clinical studies will be helpful in defining the mechanisms of action for dental materials that promote or inhibit angiogenesis events at applied areas. PMID:27546854

Folding Inquiry into Cookbook Lab Activities

ERIC Educational Resources Information Center

Gooding, Julia; Metz, Bill

2012-01-01

Cookbook labs have been a part of science programs for years, even though they serve little purpose other than to verify phenomena that have been previously presented by means other than through investigations. Cookbook science activities follow a linear path to a known outcome, telling students what procedures to follow, which materials to use,…

Measuring Very Small Quantities: Fascinating Suggestions for Math or Science.

ERIC Educational Resources Information Center

Thompson, John Taylor

1989-01-01

Described are several activities for teaching children to determine mass and volume. Included are the masses of a water drop and a grain of rice; the volume of a water drop and small solids; and measuring the width of a hair. Procedures and materials for the activities are discussed. (CW)

Living on a Cotton Farm: Mexican American Life in Texas.

ERIC Educational Resources Information Center

Black, Mary S.

This packet of six lesson plans highlights Mexican-American life on a Texas cotton farm in the early 20th century. Each lesson provides a lesson overview; states educational objectives; cites materials needed; details the procedure for classroom implementation; offers a closure activity; and suggests an extension activity. The packet is divided…

Small Business Management Education. Entrepreneurship Education for Adults-Program Development and Implementation. Final Report.

ERIC Educational Resources Information Center

Minnesota Univ., St. Paul. Dept. of Agricultural Education.

A project was organized around a series of activities to prepare materials or disseminations for small business management education programs. Activities were as follow: (1) prepare needs assessment procedures for determining the number and types of businesses to be served by a small business management education program; prepare model…

A Manual for the Illinois Student Longitudinal Case Study System (ISLCS). Procedures and Materials for Planning and Implementing the ISLCS.

ERIC Educational Resources Information Center

Carvell, Fred; Carvell, Joan B.

Designed for local school and district vocational educators, this manual contains instructions and materials necessary to plan and implement a student longitudinal followup system. Part 1 provides background information and definitions used in the system. In part 2 are described the 11 major activities that must be undertaken by local program…

Tryout and Evaluation of Prototype LMS (Learning Mastery System) Training System Under Exclusive Use Agreement.

ERIC Educational Resources Information Center

McDonald, Cheryl; Hylton, John A.

In 1970-1971 Learning Mastery System (LMS) materials were made available to schools within the state of California under an Exclusive Use Agreement. The LMS is a set of materials and procedures prepared by the Southwest Regional Laboratory (SWRL) as an objectives-based framework to assist in managing the learning activities of existing reading…

Get on Board the Underground Railroad: A Sample Unit for Fifth-Grade History Students.

ERIC Educational Resources Information Center

Ferguson, Phyllis M.; Young, Terrell A.

1996-01-01

Reviews the materials and procedures used in a fifth-grade history unit on the Underground Railroad. The unit integrated a variety of teaching methods and materials making extensive use of historical literature, K-W-L (what we Know, what we Want to find out, what we Learned) charts, and activities aimed at different learning styles. (MJP)

[Features of the maintenance of automated developing machines].

PubMed

Koveshnikov, A I

1999-01-01

Based on his long-term own experience the author gives recommendations on the assembly, adjustment, operation, and preventive maintenance of automatic developing machines. Procedures are presented for evaluating the quality of X-ray films and controlling the activity of operating qualities of a developer while machining photographic materials. Troubles and malfunction of equipment and procedures for their elimination are shown to affect the quality of development of films.

Partial Purification of a Legume Nodulation Factor Present in Coconut Water 1

PubMed Central

Schaffer, A. G.; Alexander, M.

1967-01-01

The nodulation of adventitious roots growing from segments of bean hypocotyl tissue was used as a bioassay for the material present in coconut water which stimulated nodulation. The active material in coconut water is acidic, but it was not possible to extract it from an acid solution with organic solvents. A purification of approximately 70-fold (on a dry wt basis) was obtained using activated charcoal, but at least 10 different compounds were present in the active fractions. A purified fraction of coconut water, which is stimulatory to the growth of carrot root explants, was active in the nodulation assay at a concentration of 2 μg/ml. This represents a 4000-fold purification of the diffusible fraction of coconut water. The charcoal fractionation procedure can be applied to the active material present in extracts of bean leaves. PMID:16656538

Biology Notes.

ERIC Educational Resources Information Center

School Science Review, 1982

1982-01-01

Describes laboratory procedures, demonstrations, and classroom activities/materials, including use of dwarf cichlids (fishes) in secondary school biology, teaching edge effects on stomatal diffusion, computer program on effects of selection on gene frequencies, biological oxidation/reduction reactions, short cuts with Drosophila, computer program…

Making an Inexpensive Skeleton for the Classroom.

ERIC Educational Resources Information Center

Shaw, Edward L., Jr.; Pruitt, Nancy E.

1990-01-01

Presented is an activity in which a skeleton is built using papier mache' and various household items. The materials; procedures for building each part of the skeleton; and directions for painting, assembling, and varnishing are included. (KR)

Biology Notes.

ERIC Educational Resources Information Center

School Science Review, 1983

1983-01-01

Describes laboratory procedures, demonstrations, and classroom activities/materials, including water relation exercise on auxin-treated artichoke tuber tissue; aerobic respiration in yeast; an improved potometer; use of mobiles in biological classification, and experiments on powdery mildews and banana polyphenol oxidase. Includes reading lists…

Chemistry Notes.

ERIC Educational Resources Information Center

School Science Review, 1983

1983-01-01

Presents chemistry experiments, laboratory procedures, demonstrations, and classroom materials/activities. These include: experiments on colloids, processing of uranium ore, action of heat on carbonates; color test for phenols and aromatic amines; solvent properties of non-electrolytes; stereoscopic applications/methods; a valency balance;…

Environmental exposure effects on composite materials for commercial aircraft

NASA Technical Reports Server (NTRS)

Hoffman, D. J.

1978-01-01

Activities reported include completion of the program design tasks, resolution of a high fiber volume problem and resumption of specimen fabrication, fixture fabrication, and progress on the analysis methodology and definition of the typical aircraft environment. Program design activities including test specimens, specimen holding fixtures, flap-track fairing tailcones, and ground exposure racks were completed. The problem experienced in obtaining acceptable fiber volume fraction results on two of the selected graphite epoxy material systems was resolved with an alteration to the bagging procedure called out in BAC 5562. The revised bagging procedure, involving lower numbers of bleeder plies, produces acceptable results. All required laminates for the contract have now been laid up and cured. Progress in the area of analysis methodology has been centered about definition of the environment that a commercial transport aircraft undergoes. The selected methodology is analagous to fatigue life assessment.

Measuring Water Potential (Activity) from Free Water to Oven Dryness 1

PubMed Central

Wiebe, Herman H.

1981-01-01

Water activities (potentials) in plant materials were measured over the range from free water to oven dryness with a Spanner thermocouple psychrometer. In a two-step procedure, water was first condensed on the thermocouple junction for several minutes. The sample was then inserted under the wet thermocouple and the maximum psychrometric cooling was measured in about 10 seconds. Calibration was with saturated salt slurries of known water activities. Psychrometric cooling was a nearly linear function of the water activity and of the negative log of the water potential. The psychrometric cooling to water activity relationship agreed with wetbulb temperature depression to relative humidity relationships given in tables. Water activities of wheat grains and leaves decreased sharply in a curvilinear fashion as their water contents decreased. Some problems of the procedure are discussed. Images PMID:16662081

The Biggest Plates on Earth. Submarine Ring of Fire--Grades 5-6. Plate Tectonics.

ERIC Educational Resources Information Center

National Oceanic and Atmospheric Administration (DOC), Rockville, MD.

This activity is designed to teach how tectonic plates move, what some consequences of this motion are, and how magnetic anomalies document the motion at spreading centers do. The activity provides learning objectives, a list of needed materials, key vocabulary words, background information, day-to-day procedures, internet connections, career…

Suggestions for Teaching Mathematics Using Laboratory Approaches. 6. Probability. Experimental Edition.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Bureau of Elementary Curriculum Development.

This guide is the sixth in a series of publications to assist teachers in using a laboratory approach to mathematics. Twenty activities on probability and statistics for the elementary grades are described in terms of purpose, materials needed, and procedures to be used. Objectives of these activities include basic probability concepts; gathering,…

Physics Notes.

ERIC Educational Resources Information Center

School Science Review, 1983

1983-01-01

Presented are physics experiments, laboratory procedures, demonstrations, and classroom materials/activities. Experiments include: speed of sound in carbon dioxide; inverse square law; superluminal velocities; and others. Equipment includes: current switch; electronic switch; and pinhole camera. Discussion of mechanics of walking is also included.…

Student Government.

ERIC Educational Resources Information Center

Morrow, Joyce

Materials for running a student government program at the junior high school level are provided in three general sections. Section 1 is a description of student government operations. Topics covered include student government responsibilities and activities, student council meeting procedures, parliamentary rules, responsibilities of the…

Procedures for waste management from street sweeping and stormwater systems.

DOT National Transportation Integrated Search

2016-05-01

Street sweeping and storm water system cleaning activities are conducted regularly by ODOT to comply with NPDES permit requirements and to ensure roadway safety. Once collected, these materials are classified as solid waste and require cost-effective...

How-To-Do-It: Glyphosate: Herbicidal Effects, Mode of Action and Degradation in Soil.

ERIC Educational Resources Information Center

Kafarski, Pawel; And Others

1988-01-01

Describes the usefulness of glyphosate for a demonstration of its herbicidal properties. Includes a list of the materials, preparation of solutions, procedures, data collection and analysis for three activities involving this chemical. (CW)

Consumer Chemistry for Middle/Jr. High Students.

ERIC Educational Resources Information Center

Rakow, Steven J.; And Others

1984-01-01

Objectives, materials needed, procedures, discussion questions, and follow-up activities are provided for five experiments. They include (1) testing for sugars; (2) comparing sugar to artificial sweeteners; (3) chewing gum scientifically; (4) soap making; and (5) making toothpaste. (JN)

Chemistry Notes.

ERIC Educational Resources Information Center

School Science Review, 1982

1982-01-01

Presents laboratory procedures, classroom materials/activities, and demonstrations, including: vapor pressure of liquid mixtures and Raoult's law; preparation/analysis of transition metal complexes of ethylammonium chloride; atomic structure display using a ZX81 (includes complete program listing); "pop-up" models of molecules and ions;…

Biology Notes.

ERIC Educational Resources Information Center

School Science Review, 1983

1983-01-01

Describes laboratory procedures, demonstrations, and classroom activities/materials, including chi-square tests on a microcomputer, an integrated biology game, microscope slides of leaf stomata, culturing soil nematodes, technique for watering locust egg-laying tubes, hazards of biological chemicals (such as benzene, benzidene, calchicine,…

Container Soil-Water Reactions.

ERIC Educational Resources Information Center

Spomer, L. Art; Hershey, David R.

1990-01-01

Presented is an activity that illustrates the relationship between the soil found in containers and soil in the ground including the amount of air and water found in each. Sponges are used to represent soil. Materials, procedures, and probable results are described. (KR)

Extracting Iron from Cereal.

ERIC Educational Resources Information Center

Katz, David A.

1992-01-01

Describes an activity in which students can investigate and evaluate the amount of iron found in most fortified breakfast cereals or cream of wheat. Includes a list of necessary materials, safety precautions, experimental procedure, disposal protocol, and nutritional explanation, utilization, and variations. (JJK)

Synergy between hexavalent chromium ions and TiO2 nanoparticles inside TUD-1 in the photocatalytic oxidation of propane, a spectroscopic study

NASA Astrophysics Data System (ADS)

Hamdy, Mohamed S.

2016-02-01

Siliceous TUD-1 mesoporous material was bi-functionalized by titanium dioxide nanoparticles and hexavalent chromium ions. The synthesis was carried out by one-pot procedure based on sol-gel technique. The photocatalytic performance of the prepared material was evaluated in the oxidation of propane under the illumination of ultraviolet light (wavelength = 360 nm) and monitored by in situ Fourier transform infrared spectroscopy. The photocatalytic activity of the prepared material exhibited an extra-ordinary activity than the reference samples that contain either hexavalent chromium ions or titanium dioxide nanoparticles only, confirming the true synergy between hexavalent chromium and tetravalent titanium ions of titanium dioxide nanoparticles.

Nevada Applied Ecology Group procedures handbook for environmental transuranics

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, M.G.; Dunaway, P.B.

The activities of the Nevada Applied Ecology Group (NAEG) integrated research studies of environmental plutonium and other transuranics at the Nevada Test Site have required many standardized field and laboratory procedures. These include sampling techniques, collection and preparation, radiochemical and wet chemistry analysis, data bank storage and reporting, and statistical considerations for environmental samples of soil, vegetation, resuspended particles, animals, and other biological material. This document, printed in two volumes, includes most of the Nevada Applied Ecology Group standard procedures, with explanations as to the specific applications involved in the environmental studies. Where there is more than one document concerningmore » a procedure, it has been included to indicate special studies or applications more complex than the routine standard sampling procedures utilized.« less

Using Melting Ice to Teach Radiometric Dating.

ERIC Educational Resources Information Center

Wise, Donald Underkofler

1990-01-01

Presented is an activity in which a mystery setting is used to motivate students to construct their own decay curves of melting ice used as an analogy to radioactive decay. Procedures, materials, apparatus, discussion topics, presentation, and thermodynamics are discussed. (CW)

How to Do It. Using the Allium Test to Detect Environmental Pollutants.

ERIC Educational Resources Information Center

Kendler, Barry S.; Koritz, Helen G.

1990-01-01

Described is a simple test which uses micro- and macro-observations of onion root tips to demonstrate mutagenic and other toxic effects of various contaminants. Discussed are materials, methods, microscopic procedures, and applications of this activity. (CW)

How-to-Do-It. Fast Plants--Rapid-Cycling Brassicas.

ERIC Educational Resources Information Center

Hafner, Robert

1990-01-01

Described is an activity in which the life cycle of a plant is investigated over a 20-day period. Included are background information, a list of materials, procedures, diagrams of the plant, apparatus, and pollination. An outline is suggested. (CW)

Qualification Status of Non-Asbestos Internal Insulation in the Reusable Solid Rocket Motor Program

NASA Technical Reports Server (NTRS)

Clayton, Louie

2011-01-01

This paper provides a status of the qualification efforts associated with NASA's RSRMV non-asbestos internal insulation program. For many years, NASA has been actively engaged in removal of asbestos from the shuttle RSRM motors due to occupation health concerns where technicians are working with an EPA banned material. Careful laboratory and subscale testing has lead to the downselect of a organic fiber known as Polybenzimidazol to replace the asbestos fiber filler in the existing synthetic rubber copolymer Nitrile Butadiene - now named PBI/NBR. Manufacturing, processing, and layup of the new material has been a challenge due to the differences in the baseline shuttle RSRM internal insulator properties and PBI/NBR material properties. For this study, data gathering and reduction procedures for thermal and chemical property characterization for the new candidate material are discussed. Difficulties with test procedures, implementation of properties into the Charring Material Ablator (CMA) codes, and results correlation with static motor fire data are provided. After two successful five segment motor firings using the PBI/NBR insulator, performance results for the new material look good and the material should eventually be qualified for man rated use in large solid rocket motor applications.

Quantitative investigation of a novel small field of view hybrid gamma camera (HGC) capability for sentinel lymph node detection

PubMed Central

Lees, John E; Bugby, Sarah L; Jambi, Layal K; Perkins, Alan C

2016-01-01

Objective: The hybrid gamma camera (HGC) has been developed to enhance the localization of radiopharmaceutical uptake in targeted tissues during surgical procedures such as sentinel lymph node (SLN) biopsy. To assess the capability of the HGC, a lymph node contrast (LNC) phantom was constructed to simulate medical scenarios of varying radioactivity concentrations and SLN size. Methods: The phantom was constructed using two clear acrylic glass plates. The SLNs were simulated by circular wells of diameters ranging from 10 to 2.5 mm (16 wells in total) in 1 plate. The second plate contains four larger rectangular wells to simulate tissue background activity surrounding the SLNs. The activity used to simulate each SLN ranged between 4 and 0.025 MBq. The activity concentration ratio between the background and the activity injected in the SLNs was 1 : 10. The LNC phantom was placed at different depths of scattering material ranging between 5 and 40 mm. The collimator-to-source distance was 120 mm. Image acquisition times ranged from 60 to 240 s. Results: Contrast-to-noise ratio analysis and full-width-at-half-maximum (FWHM) measurements of the simulated SLNs were carried out for the images obtained. Over the range of activities used, the HGC detected between 87.5 and 100% of the SLNs through 20 mm of scattering material and 75–93.75% of the SLNs through 40 mm of scattering material. The FWHM of the detected SLNs ranged between 11.93 and 14.70 mm. Conclusion: The HGC is capable of detecting low accumulation of activity in small SLNs, indicating its usefulness as an intraoperative imaging system during surgical SLN procedures. Advances in knowledge: This study investigates the capability of a novel small-field-of-view (SFOV) HGC to detect low activity uptake in small SLNs. The phantom and procedure described are inexpensive and could be easily replicated and applied to any SFOV camera, to provide a comparison between systems with clinically relevant results. PMID:27537079

Material characterization of active fiber composites for integral twist-actuated rotor blade application

NASA Astrophysics Data System (ADS)

Wickramasinghe, Viresh K.; Hagood, Nesbitt W.

2004-10-01

The primary objective of this work was to perform material characterization of the active fiber composite (AFC) actuator system for the Boeing active material rotor (AMR) blade application. The purpose of the AMR was to demonstrate active vibration control in helicopters through integral twist-actuation of the blade. The AFCs were a new structural actuator system consisting of piezoceramic fibers embedded in an epoxy matrix and sandwiched between interdigitated electrodes to enhance actuation performance. These conformable actuators were integrated directly into the blade spar laminate as active plies within the composite structure to perform structural control. Therefore, extensive electromechanical material characterization was required to evaluate AFCs both as actuators and as structural components of the blade. The characterization tests designed to extract important electromechanical properties under simulated blade operating conditions included nominal actuation tests, stress-strain tests and actuation under tensile load tests. This paper presents the test results as well as the comprehensive testing procedure developed to evaluate the relevant properties of the AFCs for structural application. The material characterization tests provided an invaluable insight into the behavior of the AFCs under various electromechanical conditions. The results from this comprehensive material characterization of the AFC actuator system supported the design and operation of the AMR blades scheduled for wind tunnel tests.

Advanced Materials by Atom Transfer Radical Polymerization.

PubMed

Matyjaszewski, Krzysztof

2018-06-01

Atom transfer radical polymerization (ATRP) has been successfully employed for the preparation of various advanced materials with controlled architecture. New catalysts with strongly enhanced activity permit more environmentally benign ATRP procedures using ppm levels of catalyst. Precise control over polymer composition, topology, and incorporation of site specific functionality enables synthesis of well-defined gradient, block, comb copolymers, polymers with (hyper)branched structures including stars, densely grafted molecular brushes or networks, as well as inorganic-organic hybrid materials and bioconjugates. Examples of specific applications of functional materials include thermoplastic elastomers, nanostructured carbons, surfactants, dispersants, functionalized surfaces, and biorelated materials. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Modified Graphene as Electrocatalyst towards Oxygen Reduction Reaction for Fuel Cells

NASA Astrophysics Data System (ADS)

Qazzazie, D.; Beckert, M.; Mülhaupt, R.; Yurchenko, O.; Urban, G.

2014-11-01

This paper reports modified graphene-based materials as metal-free electrocatalysts for oxygen reduction reaction (ORR) with outstanding electrocatalytic activity in alkaline conditions. Nitrogen-doped graphene samples are synthesized by a novel procedure. The defect density in the structure of the prepared materials is investigated by Raman spectroscopy. Further structural characterization by X-ray photoelectron spectroscopy reveals the successful nitrogen doping of graphene. The electrochemical characterization of graphene and nitrogen-doped graphene in 0.1 M KOH solution demonstrates the material's electrocatalytic activity towards ORR. For graphene an onset potential of - 0.175 V vs. Ag/AgCl reference electrode is determined, while for nitrogen-doped graphene the determined onset potential is - 0.160 V. Thus, the electrocatalytic activity of nitrogen-doped graphene towards ORR is enhanced which can be ascribed to the effect of nitrogen doping.

Natural Origin Materials for Osteochondral Tissue Engineering.

PubMed

Bonani, Walter; Singhatanadgige, Weerasak; Pornanong, Aramwit; Motta, Antonella

2018-01-01

Materials selection is a critical aspect for the production of scaffolds for osteochondral tissue engineering. Synthetic materials are the result of man-made operations and have been investigated for a variety of tissue engineering applications. Instead, the products of physiological processes and the metabolic activity of living organisms are identified as natural materials. Over the recent decades, a number of natural materials, namely, biopolymers and bioceramics, have been proposed as the main constituent of osteochondral scaffolds, but also as cell carriers and signaling molecules. Overall, natural materials have been investigated both in the bone and in the cartilage compartment, sometimes alone, but often in combination with other biopolymers or synthetic materials. Biopolymers and bioceramics possess unique advantages over their synthetic counterparts due similarity with natural extracellular matrix, the presence of cell recognition sites and tunable chemistry. However, the characteristics of natural origin materials can vary considerably depending on the specific source and extraction process. A deeper understanding of the relationship between material variability and biological activity and the definition of standardized manufacturing procedures will be crucial for the future of natural materials in tissue engineering.

Early differential processing of material images: Evidence from ERP classification.

PubMed

Wiebel, Christiane B; Valsecchi, Matteo; Gegenfurtner, Karl R

2014-06-24

Investigating the temporal dynamics of natural image processing using event-related potentials (ERPs) has a long tradition in object recognition research. In a classical Go-NoGo task two characteristic effects have been emphasized: an early task independent category effect and a later task-dependent target effect. Here, we set out to use this well-established Go-NoGo paradigm to study the time course of material categorization. Material perception has gained more and more interest over the years as its importance in natural viewing conditions has been ignored for a long time. In addition to analyzing standard ERPs, we conducted a single trial ERP pattern analysis. To validate this procedure, we also measured ERPs in two object categories (people and animals). Our linear classification procedure was able to largely capture the overall pattern of results from the canonical analysis of the ERPs and even extend it. We replicate the known target effect (differential Go-NoGo potential at frontal sites) for the material images. Furthermore, we observe task-independent differential activity between the two material categories as early as 140 ms after stimulus onset. Using our linear classification approach, we show that material categories can be differentiated consistently based on the ERP pattern in single trials around 100 ms after stimulus onset, independent of the target-related status. This strengthens the idea of early differential visual processing of material categories independent of the task, probably due to differences in low-level image properties and suggests pattern classification of ERP topographies as a strong instrument for investigating electrophysiological brain activity. © 2014 ARVO.

Analytical procedure for the determination of Ethyl Lauroyl Arginate (LAE) to assess the kinetics and specific migration from a new antimicrobial active food packaging.

PubMed

Pezo, Davinson; Navascués, Beatriz; Salafranca, Jesús; Nerín, Cristina

2012-10-01

Ethyl Lauroyl Arginate (LAE) is a cationic tensoactive compound, soluble in water, with a wide activity spectrum against moulds and bacteria. LAE has been incorporated as antimicrobial agent into packaging materials for food contact and these materials require to comply with the specific migration criteria. In this paper, one analytical procedure has been developed and optimized for the analysis of LAE in food simulants after the migrations tests. It consists of the formation of an ionic pair between LAE and the inorganic complex Co(SCN)(4)(2-) in aqueous solution, followed by a liquid-liquid extraction in a suitable organic solvent and further UV-Vis absorbance measurement. In order to evaluate possible interferences, the ionic pair has been also analyzed by high performance liquid chromatography with UV-Vis detection. Both procedures provided similar analytical characteristics, with linear ranges from 1.10 to 25.00 mg kg(-1), linearity higher than 0.9886, limits of detection and quantification of 0.33 and 1.10 mg kg(-1), respectively, accuracy better than 1% as relative error and precision better than 3.6% expressed as RSD. Optimization of analytical techniques, thermal and chemical stability of LAE, as well as migration kinetics of LAE from experimental active packaging are reported and discussed. Copyright © 2012 Elsevier B.V. All rights reserved.

Primary Astronomy.

ERIC Educational Resources Information Center

Greenstone, Sid; Smith, Murray

Selected materials needed to teach an astronomy unit as well as suggested procedures, activities, ideas, and astronomy fact sheets published by the Manitoba Planetarium are provided. Subjects of the fact sheets include: publications and classroom picture sets available from the National Aeronautics and Space Administration and facts and statistics…

Astronomy.

ERIC Educational Resources Information Center

Greenstone, Sid; Smith, Murray

Selected materials needed to teach an astronomy unit as well as suggested procedures, activities, ideas, and astronomy fact sheets published by the Manitoba Planetarium are provided. Subjects of the fact sheets include: publications and classroom picture sets available from the National Aeronautics and Space Administration and facts and statistics…

Intermediate Astronomy.

ERIC Educational Resources Information Center

Greenstone, Sid; Smith, Murray

Selected materials needed to teach an astronomy unit as well as suggested procedures, activities, ideas, and astronomy fact sheets published by the Manitoba Planetarium are provided. Subjects of the fact sheets include: publications and classroom picture sets available from the National Aeronautics and Space Administration and facts and statistics…

10 CFR 70.72 - Facility changes and change process.

Code of Federal Regulations, 2010 CFR

2010-01-01

... management system to evaluate, implement, and track each change to the site, structures, processes, systems, equipment, components, computer programs, and activities of personnel. This system must be documented in... licensed material; (3) Modifications to existing operating procedures including any necessary training or...

10 CFR 70.72 - Facility changes and change process.

Code of Federal Regulations, 2011 CFR

2011-01-01

... management system to evaluate, implement, and track each change to the site, structures, processes, systems, equipment, components, computer programs, and activities of personnel. This system must be documented in... licensed material; (3) Modifications to existing operating procedures including any necessary training or...

10 CFR 70.72 - Facility changes and change process.

Code of Federal Regulations, 2012 CFR

2012-01-01

... management system to evaluate, implement, and track each change to the site, structures, processes, systems, equipment, components, computer programs, and activities of personnel. This system must be documented in... licensed material; (3) Modifications to existing operating procedures including any necessary training or...

10 CFR 70.72 - Facility changes and change process.

Code of Federal Regulations, 2014 CFR

2014-01-01

... management system to evaluate, implement, and track each change to the site, structures, processes, systems, equipment, components, computer programs, and activities of personnel. This system must be documented in... licensed material; (3) Modifications to existing operating procedures including any necessary training or...

10 CFR 70.72 - Facility changes and change process.

Code of Federal Regulations, 2013 CFR

2013-01-01

... management system to evaluate, implement, and track each change to the site, structures, processes, systems, equipment, components, computer programs, and activities of personnel. This system must be documented in... licensed material; (3) Modifications to existing operating procedures including any necessary training or...

Owl Pellets.

ERIC Educational Resources Information Center

Thompson, Craig D.

1987-01-01

Provides complete Project WILD lesson plans for 20-45-minute experiential science learning activity for grades 3-7 students. Describes how students construct a simple food chain through examination of owl pellets. Includes lesson objective, method, background information, materials, procedure, evaluation, and sources of owl pellets and posters.…

The Synthesis of Proteins-A Simple Experiment To Show the Procedures and Problems of Using Radioisotopes in Biochemical Studies

NASA Astrophysics Data System (ADS)

Hawcroft, David M.

1996-11-01

Courses of organic chemistry frequently include studies of biochemistry and hence of biochemical techniques. Radioisotopes have played a major role in the understanding of metabolic pathways, transport, enzyme activity and other processes. The experiment described in this paper uses simple techniques to illustrate the procedures involved in working with radioisotopes when following a simplified metabolic pathway. Safety considerations are discussed and a list of safety rules is provided, but the experiment itself uses very low levels of a weak beta-emitting isotope (tritium). Plant material is suggested to reduce legal, financial and emotive problems, but the techniques are applicable to all soft-tissued material. The problems involved in data interpretation in radioisotope experiments resulting from radiation quenching are resolved by simple correction calculations, and the merits of using radioisotopes shown by a calculation of the low mass of material being measured. Suggestions for further experiments are given.

Improvements in soft gelatin capsule sample preparation for USP-based simethicone FTIR analysis.

PubMed

Hargis, Amy D; Whittall, Linda B

2013-02-23

Due to the absence of a significant chromophore, Simethicone raw material and finished product analysis is achieved using a FTIR-based method that quantifies the polydimethylsiloxane (PDMS) component of the active ingredient. The method can be found in the USP monographs for several dosage forms of Simethicone-containing pharmaceutical products. For soft gelatin capsules, the PDMS assay values determined using the procedure described in the USP method were variable (%RSDs from 2 to 9%) and often lower than expected based on raw material values. After investigation, it was determined that the extraction procedure used for sample preparation was causing loss of material to the container walls due to the hydrophobic nature of PDMS. Evaluation revealed that a simple dissolution of the gelatin capsule fill in toluene provided improved assay results (%RSDs≤0.5%) as well as a simplified and rapid sample preparation. Copyright © 2012 Elsevier B.V. All rights reserved.

The Effect of Alkaline Activator Ratio on the Compressive Strength of Fly Ash-Based Geopolymer Paste

NASA Astrophysics Data System (ADS)

Lăzărescu, A. V.; Szilagyi, H.; Baeră, C.; Ioani, A.

2017-06-01

Alkaline activation of fly ash is a particular procedure in which ash resulting from a power plant combined with a specific alkaline activator creates a solid material when dried at a certain temperature. In order to obtain desirable compressive strengths, the mix design of fly ash based geopolymer pastes should be explored comprehensively. To determine the preliminary compressive strength for fly ash based geopolymer paste using Romanian material source, various ratios of Na2SiO3 solution/ NaOH solution were produced, keeping the fly ash/alkaline activator ratio constant. All the mixes were then cured at 70 °C for 24 hours and tested at 2 and 7 days, respectively. The aim of this paper is to present the preliminary compressive strength results for producing fly ash based geopolymer paste using Romanian material sources, the effect of alkaline activators ratio on the compressive strength and studying the directions for future research.

A numerical procedure for failure mode detection of masonry arches reinforced with fiber reinforced polymeric materials

NASA Astrophysics Data System (ADS)

Galassi, S.

2018-05-01

In this paper a mechanical model of masonry arches strengthened with fibre-reinforced composite materials and the relevant numerical procedure for the analysis are proposed. The arch is modelled by using an assemblage of rigid blocks that are connected together and, also to the supporting structures, by mortar joints. The presence of the reinforcement, usually a sheet placed at the intrados or the extrados, prevents the occurrence of cracks that could activate possible collapse mechanisms, due to tensile failure of the mortar joints. Therefore, in a reinforced arch failure generally occurs in a different way from the URM arch. The numerical procedure proposed checks, as a function of an external incremental load, the inner stress state in the arch, in the reinforcement and in the adhesive layer. In so doing, it then provides a prediction of failure modes. Results obtained from experimental tests, carried out on four in-scale models performed in a laboratory, have been compared with those provided by the numerical procedure, implemented in ArchiVAULT, a software developed by the author. In this regard, the numerical procedure is an extension of previous works. Although additional experimental investigations are necessary, these former results confirm that the proposed numerical procedure is promising.

Computer-assisted knowledge acquisition for hypermedia systems

NASA Technical Reports Server (NTRS)

Steuck, Kurt

1990-01-01

The usage of procedural and declarative knowledge to set up the structure or 'web' of a hypermedia environment is described. An automated knowledge acquisition tool was developed that helps a knowledge engineer elicit and represent an expert's knowledge involved in performing procedural tasks. The tool represents both procedural and prerequisite, declarative knowledge that supports each activity performed by the expert. This knowledge is output and subsequently read by a hypertext scripting language to generate the link between blank, but labeled cards. Each step of the expert's activity and each piece of supporting declarative knowledge is set up as an empty node. An instructional developer can then enter detailed instructional material concerning each step and declarative knowledge into these empty nodes. Other research is also described that facilitates the translation of knowledge from one form into a form more readily useable by computerized systems.

Propulsion Test Handbook: MSFC and SSC. Draft 01

NASA Technical Reports Server (NTRS)

Hammond, John M.

2010-01-01

This Handbook was prepared to provide Propulsion Test Personnel a central source of fundamental reference material. The Testing Process, which is a three-part process of pre-test activities, testing, and post-test activities, involves a collaborative effort from the mechanical, electrical, safety, and environmental disciplines in the test environment. Pre-test activities, testing, and post-test activities processes will vary, per test requirements; however, the content of this Handbook should cover basic procedures and standards that are shared across Centers.

Precise non-steady-state characterization of solid active materials with no preliminary mechanistic assumptions

DOE PAGES

Constales, Denis; Yablonsky, Gregory S.; Wang, Lucun; ...

2017-04-25

This paper presents a straightforward and user-friendly procedure for extracting a reactivity characterization of catalytic reactions on solid materials under non-steady-state conditions, particularly in temporal analysis of products (TAP) experiments. The kinetic parameters derived by this procedure can help with the development of detailed mechanistic understanding. The procedure consists of the following two major steps: 1) Three “Laplace reactivities” are first determined based on the moments of the exit flow pulse response data; 2) Depending on a select kinetic model, kinetic constants of elementary reaction steps can then be expressed as a function of reactivities and determined accordingly. In particular,more » we distinguish two calculation methods based on the availability and reliability of reactant and product data. The theoretical results are illustrated using a reverse example with given parameters as well as an experimental example of CO oxidation over a supported Au/SiO 2 catalyst. The procedure presented here provides an efficient tool for kinetic characterization of many complex chemical reactions.« less

Certification of biological candidates reference materials by neutron activation analysis

NASA Astrophysics Data System (ADS)

Kabanov, Denis V.; Nesterova, Yulia V.; Merkulov, Viktor G.

2018-03-01

The paper gives the results of interlaboratory certification of new biological candidate reference materials by neutron activation analysis recommended by the Institute of Nuclear Chemistry and Technology (Warsaw, Poland). The correctness and accuracy of the applied method was statistically estimated for the determination of trace elements in candidate reference materials. The procedure of irradiation in the reactor thermal fuel assembly without formation of fast neutrons was carried out. It excluded formation of interfering isotopes leading to false results. The concentration of more than 20 elements (e.g., Ba, Br, Ca, Co, Ce, Cr, Cs, Eu, Fe, Hf, La, Lu, Rb, Sb, Sc, Ta, Th, Tb, Yb, U, Zn) in candidate references of tobacco leaves and bottom sediment compared to certified reference materials were determined. It was shown that the average error of the applied method did not exceed 10%.

Patient seeking behaviors and online personas: social media's role in cosmetic dermatology.

PubMed

Ross, Nicholas A; Todd, Quintin; Saedi, Nazanin

2015-02-01

Social media sites, composed of providers, patients, and their social circles, facilitate health and healthcare delivery. To examine patients' perspective on social media as an information source, communication tool, and referral service through an anonymous survey. In addition, influences on patient Internet personas, an actively constructed online identity, around the time of cosmetic procedures are examined. Patients completed an anonymous institutional review board-approved survey during their initial cosmetic visit. Patients are highly active on social media using it as a multipurpose tool for physician referral services, support groups, and disease education. Patients gathered dermatology information from multiple sources, including friends, family, social media pages, and other online sources, often sharing their own experiences through social media platforms. Patients indicated a desire for provider educational materials on interactive media pages. Most preferred material written by a physician, but some indicated a preference for both physician and lay material. Online images highlighting dissatisfying skin features were influential to select patients, prompting manipulation of online personas and evaluation for aesthetic procedures. Although the study examines cosmetic patient perspectives, data highlight valuable trends for all dermatologists. Social media can improve patient education, collaboration, recruitment, and online professional image, leading to healthier patient-centered care.

46 CFR 164.009-15 - Test procedure.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 6 2014-10-01 2014-10-01 false Test procedure. 164.009-15 Section 164.009-15 Shipping...: SPECIFICATIONS AND APPROVAL MATERIALS Noncombustible Materials for Merchant Vessels § 164.009-15 Test procedure. (a) General. Paragraphs (b) through (k) of this section contain the test procedures for each material...

Dental Detectives. The Trial of the Toothpastes Presents No Problems for the Tooth Sleuths.

ERIC Educational Resources Information Center

McShane, Joan Braunagel

1991-01-01

Described is an activity where students determine the effect of different toothpastes on teeth. Students used observational data and pH changes to determine any changes in the teeth. Included are a list of materials, procedures, and results. (KR)

Practical Molecular Biology for Students: An Integrated Approach to Teaching Basic Techniques.

ERIC Educational Resources Information Center

Hames, B. David; And Others

1990-01-01

An activity that introduces students to the correct handling of bacterial recombinants, antibiotic sensitivity testing, insertional inactivation, plasmid DNA isolation, restriction endonuclease digestion, agarose gel electrophoresis, Southern blotting, hybridization, and autoradiography is presented. A list of needed materials, procedures, safety…

Junior High Astronomy.

ERIC Educational Resources Information Center

Greenstone, Sid; Smith, Murray

Selected materials needed to teach an astronomy unit as well as suggested procedures, activities, ideas, and astronomy fact sheets published by the Manitoba Planetarium are provided. Subjects of the fact sheets include: publications and classroom picture sets available from the National Aeronautics and Space Administration and facts and statistics…

What Is Career English?

ERIC Educational Resources Information Center

Brevard County School Board, Cocoa, FL.

English courses which involve the language arts skills and which should be incorporated into major career areas are described in this guide. The guide also describes the units, procedures, activities, supplementary materials, and evaluation tools and is keyed--by number--to the State Accreditation Standards and assessment objectives. Teaching…

Safely Teaching Koch's Postulates on the Causation of Infectious Disease.

ERIC Educational Resources Information Center

Stewart, Peter R.

1990-01-01

Described is an activity in which the interactions between a parasite and its host may be demonstrated using the relationship between yogurt and two species of bacteria. Background information on Koch's postulates is provided. Materials, laboratory procedures, and results are discussed. (CW)

Let's Measure the Dielectric Constant of a Piece of Paper!

ERIC Educational Resources Information Center

Karlow, Edwin A.

1991-01-01

Described is a simple circuit with which students can observe the effect of common dielectric materials in a capacitor and measure the dielectric constant of a piece of paper. Discussed are the theory, apparatus construction, and experimental procedures for this activity. (CW)

Embellished String Prints. Cover Story.

ERIC Educational Resources Information Center

Smith, Mary Ruth

1999-01-01

Focuses on a printmaking activity in which students create embellished string prints using the relief process of string glued to chip board. Explains that string prints can easily be embellished with oil pastels. Provides a description of the procedure and a list of materials and methods. (CMK)

76 FR 39132 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-05

... objects or materials for a variety of purposes in research, industry, and other fields. The subparts cover specific requirements for obtaining a license or license exemption, design and performance criteria for... training, written operating and emergency procedures, personnel monitoring, radiation surveys, inspection...

Invitations to Cells: Life's Building Blocks. Teacher-Friendly Science Activities with Reproducible Handouts in English and Spanish. Grades 3-5. Living Things Science Series.

ERIC Educational Resources Information Center

Camp, Carole Ann, Ed.

This booklet, one of six in the Living Things Science series, presents activities about cells which address basic "Benchmarks" suggested by the American Association for the Advancement of Science for the Living Environment for grades 3-5. Contents include background information, vocabulary (in English and Spanish), materials, procedures,…

Challenges of Using Audio-Visual Aids as Warm-Up Activity in Teaching Aviation English

ERIC Educational Resources Information Center

Sahin, Mehmet; Sule, St.; Seçer, Y. E.

2016-01-01

This study aims to find out the challenges encountered in the use of video as audio-visual material as a warm-up activity in aviation English course at high school level. This study is based on a qualitative study in which focus group interview is used as the data collection procedure. The participants of focus group are four instructors teaching…

A new transformation-regeneration procedure in the model legume Lotus japonicus: root explants as a source of large numbers of cells susceptible to Agrobacterium-mediated transformation.

PubMed

Lombari, P; Ercolano, E; El Alaoui, H; Chiurazzi, M

2003-04-01

We describe herein a simple and efficient transformation procedure for the production of transgenic Lotus japonicus plants. In this new procedure, dedifferentiated root explants, used as starting material, are the source of a large number of cells that are competent for the regeneration procedure, with a high susceptibility to Agrobacterium infection. The application of this protocol resulted in a tenfold increase in the number of transformants produced by a single plant in comparison to the widely used hypocotyl transformation procedure. Furthermore, our procedure allowed the use of intact plants stored for a long time at 4 degrees C, thus providing a potential continuous supply of explants for transformation experiments. The overall time of incubation under tissue culture conditions required to obtain a plant transferable into soil is 4 months. The transgenic nature of the transformants was demonstrated by the detection of beta-glucuronidase (GUS) activity in the primary transformants and by molecular analysis. Stable transformation was indicated by Mendelian segregation of the hygromycin selectable marker and of the gusA activity after selfing of the transgenic plants.

Activated microporous-mesoporous carbon derived from chestnut shell as a sustainable anode material for high performance microbial fuel cells.

PubMed

Chen, Qin; Pu, Wenhong; Hou, Huijie; Hu, Jingping; Liu, Bingchuan; Li, Jianfeng; Cheng, Kai; Huang, Long; Yuan, Xiqing; Yang, Changzhu; Yang, Jiakuan

2018-02-01

Microbial fuel cells (MFCs) are promising biotechnologies tool to harvest electricity by decomposing organic matter in waste water, and the anode material is a critical factor in determining the performance of MFCs. In this study, chestnut shell is proposed as a novel anode material with mesoporous and microporous structure prepared via a simple carbonization procedure followed by an activation process. The chemical activation process successfully modified the macroporous structure, created more mesoporous and microporous structure and decreased the O-content and pyridinic/pyrrolic N groups on the biomass anode, which were beneficial for improving charge transfer efficiency between the anode surface and microbial biofilm. The MFC with activated biomass anode achieved a maximum power density (23.6 W m -3 ) 2.3 times higher than carbon cloth anode (10.4 W m -3 ). This study introduces a promising and feasible strategy for the fabrication of high performance anodes for MFCs derived from cost-effective, sustainable natural materials. Copyright © 2017 Elsevier Ltd. All rights reserved.

A Method of Utilizing Small Astronomical Telescopes in Earth Science Instruction

NASA Astrophysics Data System (ADS)

Kim, Kyung-Im; Lee, Young Bom

1985-12-01

Four observational astronomical items have been pilottested with a 150mm refracting telescope in order to lay out the detailed procedures for the suggested(inquiry) activities listed in the high school earth science curriculum and to contrive some adequate instructions for students stressed on how to make proper treatments with the collected materials. The tested items were of sunspots' motion, the size of lunar craters, the Galilean satellites' revolution, and the galactic distribution of stars. Following series of activities are suggested with respect to the way of collecting observational data and of giving proper instruction to students in class: 1) Photography and other materials be made by teacher and/or extracurricular group of students; 2) Replicas(xeroxed, photographs, or slides) be made from the collected materials, so that they are available to all the students in class; 3) Quantative analyses be taken as sutdents' activities

A direct biocombinatorial strategy toward next generation, mussel-glue inspired saltwater adhesives.

PubMed

Wilke, Patrick; Helfricht, Nicolas; Mark, Andreas; Papastavrou, Georg; Faivre, Damien; Börner, Hans G

2014-09-10

Biological materials exhibit remarkable, purpose-adapted properties that provide a source of inspiration for designing new materials to meet the requirements of future applications. For instance, marine mussels are able to attach to a broad spectrum of hard surfaces under hostile conditions. Controlling wet-adhesion of synthetic macromolecules by analogue processes promises to strongly impact materials sciences by offering advanced coatings, adhesives, and glues. The de novo design of macromolecules to mimic complex aspects of mussel adhesion still constitutes a challenge. Phage display allows material scientists to design specifically interacting molecules with tailored affinity to material surfaces. Here, we report on the integration of enzymatic processing steps into phage display biopanning to expand the biocombinatorial procedure and enable the direct selection of enzymatically activable peptide adhesion domains. Adsorption isotherms and single molecule force spectroscopy show that those de novo peptides mimic complex aspects of bioadhesion, such as enzymatic activation (by tyrosinase), the switchability from weak to strong binders, and adsorption under hostile saltwater conditions. Furthermore, peptide-poly(ethylene oxide) conjugates are synthesized to generate protective coatings, which possess anti-fouling properties and suppress irreversible interactions with blood-plasma protein cocktails. The extended phage display procedure provides a generic way to non-natural peptide adhesion domains, which not only mimic nature but also improve biological sequence sections extractable from mussel-glue proteins. The de novo peptides manage to combine several tasks in a minimal 12-mer sequence and thus pave the way to overcome major challenges of technical wet glues.

Excerpt from a Forthcoming Book. The Ocean Book: Dive In--The Beginning of Your Ocean Study.

ERIC Educational Resources Information Center

Science Activities, 1989

1989-01-01

Six activities complete with reproducible worksheets are presented. Materials and procedures for each are listed. Answers to the quiz and crossword puzzle are included. Topics include the water cycle, the world's oceans, the ocean floor, and fish. (CW)

Sneak Preview: NSTW 1993.

ERIC Educational Resources Information Center

Science and Children, 1992

1992-01-01

Presents an activity that is part of the National Science and Technology Week (NSTW) 1993. Students apply principles of biomechanics to find the most effective techniques for performing a standing broad jump and use that analysis to improve their own jumping. Instructions include procedures, materials needed, and possible extensions to the…

Physical Education: Tennis, Physical Fitness, Body-Building.

ERIC Educational Resources Information Center

Veilleux, Dave

This unit plan for introducing high school students to the game of tennis is divided into objectives and suggested activities. A listing of resource outlets and retail prices for equipment and audiovisual materials is included. Student evaluation procedures are outlined, and a sample evaluation checklist is provided. (LH)

To Tell the Truth: A Classroom Gaming Procedure.

ERIC Educational Resources Information Center

Hisgen, Jon W.

1981-01-01

Gaming activities increase a student's motivation to learn cognitive material, develop a student's sensitivity to the way media works, and improve the student's decision making skills. The game presented is based on the television program "To Tell the Truth," and centers on questions concerning arthritis. (JN)

Environmental Science for the Inner City

ERIC Educational Resources Information Center

Kaminski, Darrell L.

1969-01-01

Presents the objectives, activities, materials, and procedure of a six-week summer course in environmental science for inner-city students at the Horace Mann Junior High School, Omaha, Nebraska. Included in this program are studies of the wildlife, conservation, and natural science of the Eastern Nebraska region. (LC)

Salivary Gland Secretion.

ERIC Educational Resources Information Center

Dorman, H. L.; And Others

1981-01-01

Describes materials and procedures for an experiment utilizing a live dog to demonstrate: (1) physiology of the salivary gland; (2) parasympathetic control of the salivary gland; (3) influence of varying salivary flow rates on sodium and potassium ions, osmolarity and pH; and (4) salivary secretion as an active process. (DS)

Roundworm Roundup.

ERIC Educational Resources Information Center

Hampton, Elaine

1991-01-01

Presents an activity in which students use microscopes to examine the diversity of the roundworm species that they obtained from water and soil samples. Discusses the role of roundworms in the ecosystem. Provides a lesson plan for teacher use that includes preparation information, materials needed, lesson procedures, and suggestions to extend the…

Physics Notes.

ERIC Educational Resources Information Center

School Science Review, 1983

1983-01-01

Discusses the Rugby clock as a source of project material, use of ZX81 for experimental science, computer dice analog, oil recovery from reservoirs, and computer simulation of Thompson's experiment for determining e/m for an electron. Activities/procedures are provided when applicable. Also presents questions (and answers) related to time-coded…

Projects procedure guide : sampling frequencies for materials testing and inspection

DOT National Transportation Integrated Search

2002-02-01

The Bureau of Materials and Physical Research's Project Procedures Guide (PPG) is used as a resource for determining reasonable inspection procedures and sampling frequencies for materials used in highway construction. This Manual seeks to establish ...

A new accurate and flexible index to assess the contribution of building materials to indoor gamma exposure.

PubMed

Nuccetelli, Cristina; Leonardi, Federica; Trevisi, Rosabianca

2015-05-01

The role of building materials as a source of gamma radiation has been recognized in the new EU Basic Safety Standards Directive which introduces an index I to screen building materials of radiological concern. This index was developed to account for average concrete values of thickness and density, the main structural characteristics of building materials that have an effect on gamma irradiation. Consequently, this screening procedure could be unfit in case of significantly different density and/or thickness of the building materials under examination. The paper proposes a more accurate and flexible activity concentration index, accounting for the actual density and thickness of building materials. Copyright © 2015 Elsevier Ltd. All rights reserved.

Evaluation of standardized sample collection, packaging, and decontamination procedures to assess cross-contamination potential during Bacillus anthracis incident response operations

PubMed Central

Calfee, M. Worth; Tufts, Jenia; Meyer, Kathryn; McConkey, Katrina; Mickelsen, Leroy; Rose, Laura; Dowell, Chad; Delaney, Lisa; Weber, Angela; Morse, Stephen; Chaitram, Jasmine; Gray, Marshall

2016-01-01

Sample collection procedures and primary receptacle (sample container and bag) decontamination methods should prevent contaminant transfer between contaminated and non-contaminated surfaces and areas during bio-incident operations. Cross-contamination of personnel, equipment, or sample containers may result in the exfiltration of biological agent from the exclusion (hot) zone and have unintended negative consequences on response resources, activities and outcomes. The current study was designed to: (1) evaluate currently recommended sample collection and packaging procedures to identify procedural steps that may increase the likelihood of spore exfiltration or contaminant transfer; (2) evaluate the efficacy of currently recommended primary receptacle decontamination procedures; and (3) evaluate the efficacy of outer packaging decontamination methods. Wet- and dry-deposited fluorescent tracer powder was used in contaminant transfer tests to qualitatively evaluate the currently-recommended sample collection procedures. Bacillus atrophaeus spores, a surrogate for Bacillus anthracis, were used to evaluate the efficacy of spray- and wipe-based decontamination procedures. Both decontamination procedures were quantitatively evaluated on three types of sample packaging materials (corrugated fiberboard, polystyrene foam, and polyethylene plastic), and two contamination mechanisms (wet or dry inoculums). Contaminant transfer results suggested that size-appropriate gloves should be worn by personnel, templates should not be taped to or removed from surfaces, and primary receptacles should be selected carefully. The decontamination tests indicated that wipe-based decontamination procedures may be more effective than spray-based procedures; efficacy was not influenced by material type but was affected by the inoculation method. Incomplete surface decontamination was observed in all tests with dry inoculums. This study provides a foundation for optimizing current B. anthracis response procedures to minimize contaminant exfiltration. PMID:27362274

Evaluation of standardized sample collection, packaging, and decontamination procedures to assess cross-contamination potential during Bacillus anthracis incident response operations.

PubMed

Calfee, M Worth; Tufts, Jenia; Meyer, Kathryn; McConkey, Katrina; Mickelsen, Leroy; Rose, Laura; Dowell, Chad; Delaney, Lisa; Weber, Angela; Morse, Stephen; Chaitram, Jasmine; Gray, Marshall

2016-12-01

Sample collection procedures and primary receptacle (sample container and bag) decontamination methods should prevent contaminant transfer between contaminated and non-contaminated surfaces and areas during bio-incident operations. Cross-contamination of personnel, equipment, or sample containers may result in the exfiltration of biological agent from the exclusion (hot) zone and have unintended negative consequences on response resources, activities and outcomes. The current study was designed to: (1) evaluate currently recommended sample collection and packaging procedures to identify procedural steps that may increase the likelihood of spore exfiltration or contaminant transfer; (2) evaluate the efficacy of currently recommended primary receptacle decontamination procedures; and (3) evaluate the efficacy of outer packaging decontamination methods. Wet- and dry-deposited fluorescent tracer powder was used in contaminant transfer tests to qualitatively evaluate the currently-recommended sample collection procedures. Bacillus atrophaeus spores, a surrogate for Bacillus anthracis, were used to evaluate the efficacy of spray- and wipe-based decontamination procedures. Both decontamination procedures were quantitatively evaluated on three types of sample packaging materials (corrugated fiberboard, polystyrene foam, and polyethylene plastic), and two contamination mechanisms (wet or dry inoculums). Contaminant transfer results suggested that size-appropriate gloves should be worn by personnel, templates should not be taped to or removed from surfaces, and primary receptacles should be selected carefully. The decontamination tests indicated that wipe-based decontamination procedures may be more effective than spray-based procedures; efficacy was not influenced by material type but was affected by the inoculation method. Incomplete surface decontamination was observed in all tests with dry inoculums. This study provides a foundation for optimizing current B. anthracis response procedures to minimize contaminant exfiltration.

Lactoferrin-Immobilized Surfaces onto Functionalized PLA Assisted by the Gamma-Rays and Nitrogen Plasma to Create Materials with Multifunctional Properties.

PubMed

Stoleru, Elena; Zaharescu, Traian; Hitruc, Elena Gabriela; Vesel, Alenka; Ioanid, Emil G; Coroaba, Adina; Safrany, Agnes; Pricope, Gina; Lungu, Maria; Schick, Christoph; Vasile, Cornelia

2016-11-23

Both cold nitrogen radiofrequency plasma and gamma irradiation have been applied to activate and functionalize the polylactic acid (PLA) surface and the subsequent lactoferrin immobilization. Modified films were comparatively characterized with respect to the procedure of activation and also with unmodified sample by water contact angle measurements, mass loss, X-ray photoelectron spectroscopy (XPS), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), atomic force microscopy (AFM), and chemiluminescence measurements. All modified samples exhibit enhanced surface properties mainly those concerning biocompatibility, antimicrobial, and antioxidant properties, and furthermore, they are biodegradable and environmentally friendly. Lactoferrin deposited layer by covalent coupling using carbodiimide chemistry showed a good stability. It was found that the lactoferrin-modified PLA materials present significantly increased oxidative stability. Gamma-irradiated samples and lactoferrin-functionalized samples show higher antioxidant, antimicrobial, and cell proliferation activity than plasma-activated and lactoferrin-functionalized ones. The multifunctional materials thus obtained could find application as biomaterials or as bioactive packaging films.

Engineering and Design: Chemical Data Quality Management for Hazardous, Toxic, Radioactive Waste Remedial Activities

DTIC Science & Technology

This regulation prescribes Chemical Data Quality Management (CDQM) responsibilities and procedures for projects involving hazardous, toxic and/or radioactive waste (HTRW) materials. Its purpose is to assure that the analytical data meet project data quality objectives. This is the umbrella regulation that defines CDQM activities and integrates all of the other U.S. Army Corps of Engineers (USACE) guidance on environmental data quality management .

A new biphasic osteoinductive calcium composite material with a negative Zeta potential for bone augmentation

PubMed Central

Smeets, Ralf; Kolk, Andreas; Gerressen, Marcus; Driemel, Oliver; Maciejewski, Oliver; Hermanns-Sachweh, Benita; Riediger, Dieter; Stein, Jamal M

2009-01-01

The aim of the present study was to analyze the osteogenic potential of a biphasic calcium composite material (BCC) with a negative surface charge for maxillary sinus floor augmentation. In a 61 year old patient, the BCC material was used in a bilateral sinus floor augmentation procedure. Six months postoperative, a bone sample was taken from the augmented regions before two titanium implants were inserted at each side. We analyzed bone neoformation by histology, bone density by computed tomography, and measured the activity of voltage-activated calcium currents of osteoblasts and surface charge effects. Control orthopantomograms were carried out five months after implant insertion. The BCC was biocompatible and replaced by new mineralized bone after being resorbed completely. The material demonstrated a negative surface charge (negative Zeta potential) which was found to be favorable for bone regeneration and osseointegration of dental implants. PMID:19523239

Determining the Kinetic Parameters Characteristic of Microalgal Growth.

ERIC Educational Resources Information Center

Martinez Sancho, Maria Eugenie; And Others

1991-01-01

An activity in which students obtain a growth curve for algae, identify the exponential and linear growth phases, and calculate the parameters which characterize both phases is described. The procedure, a list of required materials, experimental conditions, analytical technique, and a discussion of the interpretations of individual results are…

10 CFR 765.32 - Reimbursement of excess funds.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Energy DEPARTMENT OF ENERGY REIMBURSEMENT FOR COSTS OF REMEDIAL ACTION AT ACTIVE URANIUM AND THORIUM PROCESSING SITES Additional Reimbursement Procedures § 765.32 Reimbursement of excess funds. (a) No later... total number of Federal-related dry short tons of byproduct material present at the site where costs of...

Using the Five Themes of Geography to Teach about Venezuela.

ERIC Educational Resources Information Center

Sunal, Cynthia Szymanski; And Others

1995-01-01

Maintains that Venezuela has many U.S. ties because of its relative proximity and economic significance. Asserts that the Five Themes of Geography can be used to design effective classroom lessons about Venezuela. Presents five activities that include student objectives, necessary materials, and step-by-step instructional procedures. (CFR)

Creative Arts and Crafts for Children with Visual Handicaps.

ERIC Educational Resources Information Center

Sykes, Kim C.; And Others

This teaching guide gives instructions for 23 creative art or craft projects thought to be appropriate for use with visually handicapped children. Usually included for each project are the educational objective, materials and equipment needed, procedure, possible variations, and photographs. The following types of activity are recommended: tempera…

Where Are We?

ERIC Educational Resources Information Center

Waiveris, Charles; Craine, Timothy V.

1996-01-01

Discusses a simple procedure for determining our exact location on Earth based on the motion of celestial bodies and latitude and longitude. This hands-on activity requires students to design and construct an apparatus that will produce accurate measurements. The materials required are a knitting needle, a tape measure, and a sunny day. (AIM)

"Madame Bovary": Illusion and Reality. [Lesson Plan].

ERIC Educational Resources Information Center

Carangelo, Audrey

Based on Gustave Flaubert's novel "Madame Bovary," this lesson plan presents activities designed to help students explore the theme of "illusion versus reality" in the novel; identify and list alternate themes in the novel; and cite specific examples of illusion versus reality from the novel. It includes objectives, materials, procedures,…

Determination of selenium in the environment and in biological material.

PubMed Central

Bem, E M

1981-01-01

This paper reviews the following problems, sampling, decomposition procedures and most important analytical methods used for selenium determination, e.g., neutron activation analysis, atomic absorption spectrometry, gas-liquid chromatography, spectrophotometry, fluorimetry, and x-ray fluorescence. This review covers the literature mainly from 1975 to 1977. PMID:7007035

Project Earth, A Curriculum Guide, Kindergarten-Primary-Intermediate.

ERIC Educational Resources Information Center

Rogers, Arnold R., Ed.

This conservation curriculum guide contains units on the air, water, soil, plants, and animals. The guide is organized by grade levels--kindergarten, primary, intermediate. Objectives and concepts are listed and suggested activities are complete with a statement of procedure and necessary materials. A resource appendix includes books, films, and…

How-to-Do-It. How Long Is a Long Time?

ERIC Educational Resources Information Center

McComas, William F.

1990-01-01

Presented is an activity designed to help students understand and appreciate the scale and order of the geologic timetable and begin to infer a relationship between biologic, chemical, and geological events. Procedures, background information, student worksheets with answers, and a list of materials are included. (CW)

Tackling Production Techniques: Vacations via Kodak's Visualmaker.

ERIC Educational Resources Information Center

Martin, Ron

1986-01-01

Describes a library media production activity in which each student uses a Kodak Ektagraphic Visualmaker to produce a color slide illustrating his/her winter vacation. The project is designed to be low-budget and to involve uncomplicated equipment. Included are explanations of performance objectives, materials, procedures, and evaluation. (EM)

Program for Autistic Children's Education: A Curriculum Guide for Autistic Students.

ERIC Educational Resources Information Center

Lister, Bob; And Others

The curriculum guide presents activity suggestions for teachers to use with autistic students in grades K-12. Brief remarks are offered on placement criteria, student characteristics, and parent participation. Goals, objectives, procedures, materials, domain areas, and evaluation approaches are listed for eight skill areas: (1) pre-vocational…

Evaluation of platelet adhesion and activation on polymers: Round-robin study to assess inter-center variability.

PubMed

Braune, S; Sperling, C; Maitz, M F; Steinseifer, U; Clauser, J; Hiebl, B; Krajewski, S; Wendel, H P; Jung, F

2017-10-01

The regulatory agencies provide recommendations rather than protocols or standard operation procedures for the hemocompatibility evaluation of novel materials e.g. for cardiovascular applications. Thus, there is a lack of specifications with regard to test setups and procedures. As a consequence, laboratories worldwide perform in vitro assays under substantially different test conditions, so that inter-laboratory and inter-study comparisons are impossible. Here, we report about a prospective, randomized and double-blind multicenter trial which demonstrates that standardization of in vitro test protocols allows a reproducible assessment of platelet adhesion and activation from fresh human platelet rich plasma as possible indicators of the thrombogenicity of cardiovascular implants. Standardization of the reported static in vitro setup resulted in a laboratory independent scoring of the following materials: poly(dimethyl siloxane) (PDMS), poly(ethylene terephthalate) (PET) and poly(tetrafluoro ethylene) (PTFE). The results of this in vitro study provide evidence that inter-laboratory and inter-study comparisons can be achieved for the evaluation of the adhesion and activation of platelets on blood-contacting biomaterials by stringent standardization of test protocols. Copyright © 2017 Elsevier B.V. All rights reserved.

46 CFR 160.176-6 - Procedure for approval of design or material revision.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false Procedure for approval of design or material revision... Lifejackets § 160.176-6 Procedure for approval of design or material revision. (a) Each change in design, material, or construction must be approved by the Commandant before being used in lifejacket production. (b...

Readability of ASPS and ASAPS educational web sites: an analysis of consumer impact.

PubMed

Aliu, Oluseyi; Chung, Kevin C

2010-04-01

Patients use the Internet to educate themselves about health-related topics, and learning about plastic surgery is a common activity for enthusiastic consumers in the United States. How to educate consumers regarding plastic surgical procedures is a continued concern for plastic surgeons when faced with the growing portion of the American population having relatively low health care literacy. The usefulness of health-related education materials on the Internet depends largely on their comprehensibility and understandability for all who visit the Web sites. The authors studied the readability of patient education materials related to common plastic surgery procedures from the American Society of Plastic Surgeons (ASPS) and the American Society for Aesthetic Plastic Surgery (ASAPS) Web sites and compared them with materials on similar topics from 10 popular health information-providing sites. The authors found that all analyzed documents on the ASPS and ASAPS Web sites targeted to the consumers were rated to be more difficult than the recommended reading grade level for most American adults, and these documents were consistently among the most difficult to read when compared with the other health information Web sites. The Internet is an increasingly popular avenue for patients to educate themselves about plastic surgery procedures. Patient education material provided on ASPS and ASAPS Web sites should be written at recommended reading grade levels to ensure that it is readable and comprehensible to the targeted audience.

Variation in levels of some leaf enzymes.

PubMed

Downton, J; Slatyer, R O

1971-03-01

Several procedures were compared for efficiency in the extraction of certain leaf enzymes (phosphoenolpyruvate carboxylase, ribulose 1,5-diphosphate carboxylase and malate dehydrogenase) in Atriplex hastata (a "C3" species exhibiting conventional photosynthetic metabolism), and in A. spongiosa (a "C4" species in which the initial photosynthetic products are C4 dicarboxylic acids). Glycolate oxidase was also assayed in some cases, and Atriplex nummularia and Sorghum bicolor were also used as test material. A simple procedure, involving a mortar and pestle grind with carborundum added to the grinding mixture, was found to be as effective as glass bead grind procedures. In addition, it was more rapid and showed less variability with different operations.Using the carborundum grind procedure, sources of variability in enzyme activity in apparently uniform leaves were compared, as were effects of time of day, leaf age and storage procedure. In general, if apparently uniform leaves could be selected, variability in levels of enzyme activity appeared to be relatively small, not exceeding about 12%. Time of day also appeared to be relatively unimportant for the enzymes examined. However, the ontogentic status of the plant was found to be an important source of variability. Leaf age was also a major source of variability where the activity was expressed on a fresh weight basis, but specific activity (i.e. activity expressed on a protein basis) was relatively constant, at least with the range of species and leaf ages examined here.Storage of fresh samples in liquid nitrogen for 24 h, prior to extraction and assay, led to only a small reduction in activity, but substantial changes occurred if storage was in dry ice or in ice and also where extracts were stored in a deep freeze.

46 CFR 164.019-9 - Procedure for acceptance of revisions of design, process, or materials.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 6 2014-10-01 2014-10-01 false Procedure for acceptance of revisions of design, process, or materials. 164.019-9 Section 164.019-9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Personal Flotation Device Components § 164.019-9 Procedure fo...

46 CFR 164.019-9 - Procedure for acceptance of revisions of design, process, or materials.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 6 2011-10-01 2011-10-01 false Procedure for acceptance of revisions of design, process, or materials. 164.019-9 Section 164.019-9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Personal Flotation Device Components § 164.019-9 Procedure fo...

46 CFR 164.019-9 - Procedure for acceptance of revisions of design, process, or materials.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false Procedure for acceptance of revisions of design, process, or materials. 164.019-9 Section 164.019-9 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL MATERIALS Personal Flotation Device Components § 164.019-9 Procedure fo...

Species-specific challenges in dog cloning.

PubMed

Kim, G A; Oh, H J; Park, J E; Kim, M J; Park, E J; Jo, Y K; Jang, G; Kim, M K; Kim, H J; Lee, B C

2012-12-01

Somatic cell nuclear transfer (SCNT) is now an established procedure used in cloning of several species. SCNT in dogs involves multiple steps including the removal of the nuclear material, injection of a donor cell, fusion, activation of the reconstructed oocytes and finally transfer to a synchronized female recipient. There are therefore many factors that contribute to cloning efficiency. By performing a retrospective analysis of 2005-2012 published papers regarding dog cloning, we define the optimum procedure and summarize the specific feature for dog cloning. © 2012 Blackwell Verlag GmbH.

The accomplishments of lithium target and test facility validation activities in the IFMIF/EVEDA phase

NASA Astrophysics Data System (ADS)

Arbeiter, Frederik; Baluc, Nadine; Favuzza, Paolo; Gröschel, Friedrich; Heidinger, Roland; Ibarra, Angel; Knaster, Juan; Kanemura, Takuji; Kondo, Hiroo; Massaut, Vincent; Saverio Nitti, Francesco; Miccichè, Gioacchino; O'hira, Shigeru; Rapisarda, David; Sugimoto, Masayoshi; Wakai, Eiichi; Yokomine, Takehiko

2018-01-01

As part of the engineering validation and engineering design activities (EVEDA) phase for the international fusion materials irradiation facility IFMIF, major elements of a lithium target facility and the test facility were designed, prototyped and validated. For the lithium target facility, the EVEDA lithium test loop was built at JAEA and used to test the stability (waves and long term) of the lithium flow in the target, work out the startup procedures, and test lithium purification and analysis. It was confirmed by experiments in the Lifus 6 plant at ENEA that lithium corrosion on ferritic martensitic steels is acceptably low. Furthermore, complex remote handling procedures for the remote maintenance of the target in the test cell environment were successfully practiced. For the test facility, two variants of a high flux test module were prototyped and tested in helium loops, demonstrating their good capabilities of maintaining the material specimens at the desired temperature with a low temperature spread. Irradiation tests were performed for heated specimen capsules and irradiation instrumentation in the BR2 reactor at SCK-CEN. The small specimen test technique, essential for obtaining material test results with limited irradiation volume, was advanced by evaluating specimen shape and test technique influences.

Assessment of the scope of practice of physicians participating in the Mais Médicos (More Doctors) Program, and associated factors.

PubMed

Girardi, Sábado Nicolau; Carvalho, Cristiana Leite; Pierantoni, Célia Regina; Costa, Juliana de Oliveira; Stralen, Ana Cristina de Sousa van; Lauar, Thaís Viana; David, Renata Bernardes

2016-09-01

The purpose of this study was to characterize the scope of practice of physicians working in primary healthcare participating in the Mais Médicos (More Doctors) Program ('PMM') and investigate the factors associated with execution of a larger number of clinical activities. It is an exploratory study carried over January to March 2016, through a self-applied questionnaire containing a list of 49 procedures, activities and actions carried out in primary healthcare. A total of 1,241 physicians took part in the study, most of them female, between age 40 and 49, and of Cuban nationality. The physicians carried out an average of 22.8 ± 8.2 procedures; they reported knowing how to carry out a larger number of procedures. Factors associated with executing a larger number of procedures were: being male, having graduated more recently, two years or less practicing in their primary healthcare unit, practicing in the North or South geographical regions, in small towns and more distant from the regional health headquarters. The main reason for not carrying out the procedures and activities that they reported knowing how to do was the lack of materials and inadequate infrastructure. The results show that the scope of practice of the physicians of the PMM is lower than their capacities, and that interventions with the intention of widening their scope are necessary.

Nitrogen and sulfur dual-doped chitin-derived carbon/graphene composites as effective metal-free electrocatalysts for dye sensitized solar cells

NASA Astrophysics Data System (ADS)

Di, Yi; Xiao, Zhanhai; Yan, Xiaoshuang; Ru, Geying; Chen, Bing; Feng, Jiwen

2018-05-01

The photovoltaic performance of dye-sensitized solar cell (DSSC) is strongly influenced by the electrocatalytic ability of its counter electrode (CE) materials. To obtain the affordable and high-performance electrocatalysts, the N/S dual-doped chitin-derived carbon materials SCCh were manufactured via in-situ S-doped method in the annealing process, where richer active sites are created compared to the pristine chitin-derived carbon matrix CCh, thus enhancing the intrinsic catalytic activity of carbon materials. When SCCh is incorporated with graphene, the yielded composites hold a further boosted catalytic activity due to facilitating the electronic fast transfer. The DSSC assembled with the optimizing rGO-SCCh-3 composite CE shows a favourable power conversion efficiency of 6.36%, which is comparable with that of the Pt-sputtering electrode (6.30%), indicate of the outstanding I3- reduction ability of the composite material. The electrochemical characterizations demonstrate that the low charge transfer resistance and excellent electrocatalytic activity all contribute to the superior photovoltaic performance. More importantly, the composite CE exhibits good electrochemical stability in the practical operation. In consideration of the low cost and the simple preparation procedure, the present metal-free carbonaceous composites could be used as a promising counter electrode material in future large scale production of DSSCs.

An extension of incidental teaching procedures to reading instruction for autistic children.

PubMed Central

McGee, G G; Krantz, P J; McClannahan, L E

1986-01-01

In an extension of incidental teaching procedures to reading instruction, two autistic children acquired functional sight-word reading skills in the context of a play activity. Children gained access to preferred toys by selecting the label of the toy in tasks requiring increasingly complex visual discriminations. In addition to demonstrating rapid acquisition of 5-choice discriminations, they showed comprehension on probes requiring reading skills to locate toys stored in labeled boxes. Also examined was postteaching transfer across stimulus materials and response modalities. Implications are that extensions of incidental teaching to new response classes may produce the same benefits documented in communication training, in terms of producing generalization concurrent with skill acquisition in the course of child-preferred activities. PMID:3733586

10 CFR 440.21 - Weatherization materials standards and energy audit procedures.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 3 2013-01-01 2013-01-01 false Weatherization materials standards and energy audit procedures. 440.21 Section 440.21 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION WEATHERIZATION ASSISTANCE FOR LOW-INCOME PERSONS § 440.21 Weatherization materials standards and energy audit procedures. (a...

10 CFR 440.21 - Weatherization materials standards and energy audit procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Weatherization materials standards and energy audit procedures. 440.21 Section 440.21 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION WEATHERIZATION ASSISTANCE FOR LOW-INCOME PERSONS § 440.21 Weatherization materials standards and energy audit procedures. (a...

10 CFR 440.21 - Weatherization materials standards and energy audit procedures.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 3 2014-01-01 2014-01-01 false Weatherization materials standards and energy audit procedures. 440.21 Section 440.21 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION WEATHERIZATION ASSISTANCE FOR LOW-INCOME PERSONS § 440.21 Weatherization materials standards and energy audit procedures. (a...

10 CFR 440.21 - Weatherization materials standards and energy audit procedures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 3 2012-01-01 2012-01-01 false Weatherization materials standards and energy audit procedures. 440.21 Section 440.21 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION WEATHERIZATION ASSISTANCE FOR LOW-INCOME PERSONS § 440.21 Weatherization materials standards and energy audit procedures. (a...

14 CFR Appendix F to Part 23 - Test Procedure

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Test Procedure F Appendix F to Part 23...—Test Procedure Part I—Acceptable Test Procedure for Self-Extinguishing Materials for Showing Compliance With §§ 23.853, 23.855, and 23.1359 Acceptable test procedure for self-extinguishing materials for...

14 CFR Appendix F to Part 23 - Test Procedure

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Test Procedure F Appendix F to Part 23...—Test Procedure Part I—Acceptable Test Procedure for Self-Extinguishing Materials for Showing Compliance With §§ 23.853, 23.855, and 23.1359 Acceptable test procedure for self-extinguishing materials for...

The IAEA’s activities on radiation protection in interventional cardiology

PubMed Central

Rehani, MM

2007-01-01

The International Atomic Energy Agency (IAEA) under its mandate of developing and applying standards of radiation safety has initiated a number of activities in recent years on radiation protection in interventional cardiology. These activities are implemented through four mechanisms, namely training, providing information through the website, research projects and assistance to Member States through Technical Cooperation (TC) projects. Major international initiatives have been taken in the area of training where more than half a dozen regional training courses have been conducted for cardiologists from over 50 countries. Additionally four national training events for over 300 medical and paramedical staff members involved in interventional procedures were held. The training material is freely available on CD from the IAEA. The newly established website provides information on radiation protection issues [1]. Two coordinated research projects have just been completed where peak skin doses to patients undergoing high dose interventional procedures were studied and factors to manage patient doses were identified. The technical cooperation projects involving protection in cardiac interventional procedures have 30 countries as participants. PMID:21614275

An antibacterial and absorbable silk-based fixation material with impressive mechanical properties and biocompatibility

NASA Astrophysics Data System (ADS)

Shi, Chenglong; Pu, Xiaobing; Zheng, Guan; Feng, Xinglong; Yang, Xuan; Zhang, Baoliang; Zhang, Yu; Yin, Qingshui; Xia, Hong

2016-11-01

Implant-associated infections and non-absorbing materials are two important reasons for a second surgical procedure to remove internal fixation devices after an orthopedic internal fixation surgery. The objective of this study was to produce an antibacterial and absorbable fixation screw by adding gentamicin to silk-based materials. The antibacterial activity was assessed against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) in vitro by plate cultivation and scanning electron microscopy (SEM). We also investigated the properties, such as the mechanical features, swelling properties, biocompatibility and degradation, of gentamicin-loaded silk-based screws (GSS) in vitro. The GSS showed significant bactericidal effects against S. aureus and E. coli. The antibacterial activity remained high even after 4 weeks of immersion in protease solution. In addition, the GSS maintained the remarkable mechanical properties and excellent biocompatibility of pure silk-based screws (PSS). Interestingly, after gentamicin incorporation, the degradation rate and water-absorbing capacity increased and decreased, respectively. These GSS provide both impressive material properties and antibacterial activity and have great potential for use in orthopedic implants to reduce the incidence of second surgeries.

Using Therapeutic Toys to Facilitate Venipuncture Procedure in Preschool Children.

PubMed

da Silva, José Ronaldo Soares; Pizzoli, Lourdes Margareth Leite; Amorim, Amanda Regina do Prado; Pinheiros, Fernanda Tais; Romanini, Giovanna Chippari; da Silva, Jack Gomes; Joanete, Shirley; Alves, Silvana S M

2016-01-01

Intravenous access procedures in children are considered to be one of the most stressful because it is invasive, and the use of needles generates anxiety, insecurity, and fear. Playful strategies using dolls and even the materials used for venipuncture can assist children in understanding, accepting, and coping with the procedure. Field research was developed on the applicability of the therapeutic toy in the preparation of preschool children for venipuncture procedure based on the protocol developed by Martins, Ribeiro, Borba, and Silva (2001) and Kiche and Almeida (2009). The study was done in a private hospital in Greater São Paulo, Brazil, with 10 children ages 3 to 6 years. Data were gathered through observation and questionnaires completed by the children's adult guardians. Before the activity, the children showed fearful facial expressions, used monosyllabic responses, and avoided looking at the health care professional. After the strategy of using therapeutic toy dolls and puppets, 40% of the children calmly accepted the venipuncture procedure, and 100% showed a change to their initial negative reaction, became more communicative and cooperative, and participated and interacted with researchers, even after the end of the activity and procedure. The strategy of therapeutic toys helps make an unfamiliar environment, strangers, and a procedure characterized as painful and difficult less stressful. Pediatric nurses are in a good position to use this resource to offer more humanized care to children.

Modules in Agricultural Education for Agricultural Production.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Bureau of Occupational and Career Curriculum Development.

Each of the 61 modules in this packet contains a brief description of the module contents, a list of the major division of units, the overall objectives, objectives by units, content outline, and suggested teaching method, student application activities, and evaluation procedures. A list of resource materials is also included for each. Some of the…

Genome Sequence of the Alkaline-Tolerant Cellulomonas sp. Strain FA1

DOE PAGES

Cohen, Michael F.; Hu, Ping; Nguyen, My Vu; ...

2015-06-18

We present the genome of the cellulose-degrading Cellulomonas sp. strain FA1 isolated from an actively serpentinizing highly alkaline spring. Knowledge of this genome will enable studies into the molecular basis of plant material degradation in alkaline environments and inform the development of lignocellulose bioprocessing procedures for biofuel production.

The Live Oak Curriculum: A Guide to Preschool Planning in the Heterogeneous Classroom.

ERIC Educational Resources Information Center

Meyers, Celeste, Ed.

Presented is a curriculum guide for preschool programs serving both handicapped and nonhandicapped children. It is explained that the guide is intended to suggest classroom activities which will strengthen existing skills and encourage development of new skills. The guide presents information on objectives, materials and procedures for the…

A Resource File for Social Studies in Utah. Level 10-12: U.S. Government.

ERIC Educational Resources Information Center

Utah State Office of Education, Salt Lake City.

This resource file contains information for Utah high school teachers to help students meet the state's instructional objectives in the elective U.S. government course. Each activity includes an instructional objective along with a title, topic, time segment, procedures, materials, evaluation, and adaptation. Sample objectives include comparing…

"Can" the Black Box

ERIC Educational Resources Information Center

Lestingi, Francis S.

1975-01-01

Describes the use of the "Arcane (mysterious) Can" which is a "tin" can which is permanently sealed, both air- and water-tight, by means of a home canning device. The canning procedure permits the use of a large variety of materials which can not be utilized in the ordinary mystery box. This Can activity is valuable for…

Hazardous Materials on Board. Second Edition. Marine Advisory Bulletin No. 43.

ERIC Educational Resources Information Center

Hild, Carl

Intended for boat captains, this illustrated book describes hazards, activities at risk, precautions to take, and procedures for spills. The inside front and back covers provide general rules for treatment of poisonings and emergency phone numbers. Chapter 1 focuses on recognizing the risk and causes of shipboard hazards and describes hazardous…

Teacher's Manual for Outdoor Studies: Geneva Sixth Grades.

ERIC Educational Resources Information Center

Mitchinson, Don F.

Written for teachers who lead their 6th grade students on a 3-day field experience program at the Rogers Environmental Education Center in Sherburne, New York, this manual provides objectives, materials, and procedures for activities which help students learn about the natural environment--pond life, trees, ecology of the forest floor, stream…

MBE growth of strain-compensated InGaAs/InAlAs/InP quantum cascade lasers

NASA Astrophysics Data System (ADS)

Gutowski, P.; Sankowska, I.; Karbownik, P.; Pierścińska, D.; Serebrennikova, O.; Morawiec, M.; Pruszyńska-Karbownik, E.; Gołaszewska-Malec, K.; Pierściński, K.; Muszalski, J.; Bugajski, M.

2017-05-01

We investigate growth conditions for strain-compensated In0.67Ga0.33As/In0.36Al0.64As/InP quantum cascade lasers (QCLs) by solid-source molecular beam epitaxy (SSMBE). The extensive discussion of growth procedures is presented. The technology was first elaborated for In0.53Ga0.47As/In0.52Al0.48As material system lattice matched to InP. After that QCLs with lattice matched active region were grown for validation of design and obtained material quality. The next step was elaboration of growth process and especially growth preparation procedures for strain compensated active regions. The grown structures were examined by HRXRD, AFM, and TEM techniques. The on-line implementation of obtained results in subsequent growth runs was crucial for achieving room temperature operating 4.4-μm lasers. For uncoated devices with Fabry-Perrot resonator up to 250 mW of optical power per facet at 300 K was obtained under pulsed conditions. The paper focuses on MBE technology and presents developed algorithm for strain-compensated QCL growth.

Microwave absorption performance of Ni(OH)2 decorating biomass carbon composites from Jackfruit peel

NASA Astrophysics Data System (ADS)

Guan, Hongtao; Wang, Huiya; Zhang, Yanlin; Dong, Chengjun; Chen, Gang; Wang, Yude; Xie, Jianbin

2018-07-01

The composite material of Ni(OH)2/biomass carbon have been prepared by a facile "carbonization-activation" procedure from Jackfruit peel and a subsequent water-bathing precipitation process. The biomass carbon material after activation (AC) is constituted of small particles and achieves a large specific surface area of 1602 m2/g. After decoration of Ni(OH)2 nanosheets, the Ni(OH)2/AC composites were investigated the microwave absorption performances in 2-18 GHz. The maximum reflection loss of the Ni(OH)2/AC composites reached -23.6 dB at 15.48 GHz with a thickness of 6 mm. Moreover, the fundamental mechanism based on conductivity, the polarization and defects is discussed. The present investigation offers a new possibility for the biomass based fabrication of potential microwave absorbing materials.

Composite particles formed by complexation of poly(methacrylic acid) - stabilized magnetic fluid with chitosan: Magnetic material for bioapplications.

PubMed

Safarik, Ivo; Stepanek, Miroslav; Uchman, Mariusz; Slouf, Miroslav; Baldikova, Eva; Nydlova, Leona; Pospiskova, Kristyna; Safarikova, Mirka

2016-10-01

A simple procedure for the synthesis of magnetic fluid (ferrofluid) stabilized by poly(methacrylic acid) has been developed. This ferrofluid was used to prepare a novel type of magnetically responsive chitosan-based composite material. Both ferrofluid and magnetic chitosan composite were characterized by a combination of microscopy (optical microscopy, TEM, SEM), scattering (static and dynamic light scattering, SANS) and spectroscopy (FTIR) techniques. Magnetic chitosan was found to be a perspective material for various bioapplications, especially as a magnetic carrier for immobilization of enzymes and cells. Lipase from Candida rugosa was covalently attached after cross-linking and activation of chitosan using glutaraldehyde. Baker's yeast cells (Saccharomyces cerevisiae) were incorporated into the chitosan composite during its preparation; both biocatalysts were active after reaction with appropriate substrates. Copyright © 2016 Elsevier B.V. All rights reserved.

Textiles for protection against microorganism

NASA Astrophysics Data System (ADS)

Sauperl, O.

2016-04-01

Concerning micro-organisms such as bacteria, viruses and fungi, there is a huge progress in the development of textile materials and procedures which should effectively protect against these various pathogens. In this sense there is especially problematic hospital environment, where it is necessary to take into account properly designed textile material which, when good selected and composed, act as a good barrier against transfer of micro-organisms through material mainly in its wet state. Respect to this it is necessary to be familiar with the rules regarding selection of the input material, the choice of proper yarn construction, the choice of the proper weaving mode, the rules regarding selection of antimicrobial-active compound suitable for (eco-friendly) treatment, and the choice of the most appropriate test method by which it is possible objectively to conclude on the reduction of selected microorganism. As is well known, fabrics are three-dimensional structures with void and non-void areas. Therefore, the physical-chemical properties of the textile material/fabric, the surface characteristics together with the shape of microorganism, and the carriers' characteristics contribute to control the transfer of microorganism through textile material. Therefore, careful planning of textile materials and treatment procedure with the compound which is able to reduce micro-organism satisfactory is particularly important, especially due to the fact that in hospital environment population with impaired immune system is mainly presented.

Mental imagery and learning: a qualitative study in orthopaedic trauma surgery.

PubMed

Ibrahim, Edward F; Richardson, Martin D; Nestel, Debra

2015-09-01

Good preparation for surgical procedures has been linked to better performance and enhanced learning in the operating theatre. Mental imagery is increasingly used to enhance performance in competitive sport and there has been recent interest in applying this in surgery. This study aims to identify the mental imagery components of preoperative preparation in orthopaedic trauma surgery and to locate these practices in existing socio-material theory in order to produce a model useful for surgical skills training. Semi-structured interviews were conducted with nine orthopaedic surgeons. Participants were identified by personal recommendation as regularly performing complex trauma operations to a high standard, and by affiliation to an international instruction course in trauma surgery. Interviews were audio-recorded and transcripts were independently analysed using thematic analysis. Analysis revealed that surgeons interact intensively with multiple colleagues and materials during their preparatory activities. Such interactions stimulate mental imagery in order to build strategy and rehearse procedures, which, in turn, stimulate preparatory interactions. Participants identified the discussion of a preoperative 'plan' as a key engagement tool for training junior surgeons and as a form of currency by which a trainee may increase his or her participation in a procedure. Preoperative preparation can be thought of as a socio-material ontology requiring a surgeon to negotiate imaginal, verbal and physical interactions with people, materials and his or her own mental imagery. Actor-network theory is useful for making sense of these interactions and for allowing surgeons to interrogate their own preparative processes. We recommend supervisors to use a form of preoperative plan as a teaching tool and to encourage trainees to develop their own preparatory skills. The ability of a trainee to demonstrate sound preparation is an indicator of readiness to perform a procedure. © 2015 John Wiley & Sons Ltd.

Dynamics of initial colonization of nonconserved perennial ryegrass by anaerobic fungi in the bovine rumen.

PubMed

Edwards, Joan E; Kingston-Smith, Alison H; Jimenez, Hugo R; Huws, Sharon A; Skøt, Kirsten P; Griffith, Gareth W; McEwan, Neil R; Theodorou, Michael K

2008-12-01

Anaerobic fungi (Neocallimastigales) are active degraders of fibrous plant material in the rumen. However, only limited information is available relating to how quickly they colonize ingested feed particles. The aim of this study was to determine the dynamics of initial colonization of forage by anaerobic fungi in the rumen and the impact of different postsampling wash procedures used to remove loosely associated microorganisms. Neocallimastigales-specific molecular techniques were optimized to ensure maximal coverage before application to assess the population size (quantitative PCR) and composition (automated ribosomal intergenic spacer analysis) of the colonizing anaerobic fungi. Colonization of perennial ryegrass (PRG) was evident within 5 min, with no consistent effect of time or wash procedure on fungal population composition. Wash procedure had no effect on population size unlike time, which had a significant effect. Colonizing fungal population size continued to increase over the incubation period after an initial lag of c. 4 min. This dynamic differs from that reported previously for rumen bacteria, where substantial colonization of PRG occurred within 5 min. The observed delay in colonization of plant material by anaerobic fungi is suggested to be primarily mediated by the time taken for fungal zoospores to locate, attach and encyst on plant material.

46 CFR 160.077-7 - Procedure for approval of design or material revision.

Code of Federal Regulations, 2010 CFR

2010-10-01

... being used in any production of PFDs. (b) Determinations of equivalence of design, construction, and... 46 Shipping 6 2010-10-01 2010-10-01 false Procedure for approval of design or material revision... Personal Flotation Devices § 160.077-7 Procedure for approval of design or material revision. (a) Each...

Overview of NORM and activities by a NORM licensed permanent decontamination and waste processing facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mirro, G.A.

1997-02-01

This paper presents an overview of issues related to handling NORM materials, and provides a description of a facility designed for the processing of NORM contaminated equipment. With regard to handling NORM materials the author discusses sources of NORM, problems, regulations and disposal options, potential hazards, safety equipment, and issues related to personnel protection. For the facility, the author discusses: description of the permanent facility; the operations of the facility; the license it has for handling specific radioactive material; operating and safety procedures; decontamination facilities on site; NORM waste processing capabilities; and offsite NORM services which are available.

Recovery of natural antioxidants from spent coffee grounds.

PubMed

Panusa, Alessia; Zuorro, Antonio; Lavecchia, Roberto; Marrosu, Giancarlo; Petrucci, Rita

2013-05-01

Spent coffee grounds (SCG) were extracted with an environmentally friendly procedure and analyzed to evaluate the recovery of relevant natural antioxidants for use as nutritional supplements, foods, or cosmetic additives. SCG were characterized in terms of their total phenolic content by the Folin-Ciocalteu procedure and antioxidant activity by the DPPH scavenging assay. Flavonoid content was also determined by a colorimetric assay. The total phenolic content was strongly correlated with the DPPH scavenging activity, suggesting that phenolic compounds are mainly responsible for the antioxidant activity of SCG. An UHPLC-PDA-TOF-MS system was used to separate, identify, and quantify phenolic and nonphenolic compounds in the SCG extracts. Important amounts of chlorogenic acids (CGA) and related compounds as well as caffeine (CAF) evidenced the high potential of SCG, a waste material that is widely available in the world, as a source of natural phenolic antioxidants.

Human memory manipulated: dissociating factors contributing to MTL activity, an fMRI study.

PubMed

Pustina, Dorian; Gizewski, Elke; Forsting, Michael; Daum, Irene; Suchan, Boris

2012-04-01

Memory processes are mainly studied with subjective rating procedures. We used a morphing procedure to objectively manipulate the similarity of target stimuli. While undergoing functional magnetic resonance imaging, nineteen subjects performed a encoding and recognition task on face and scene stimuli, varying the degree of manipulation of previously studied targets at 0%, 20%, 40% or 60%. Analyses were performed with parametric modulations for objective stimulus status (morphing level), subjective memory (confidence rating), and reaction times (RTs). Results showed that medial temporal lobe (MTL) activity can be best explained by a combination of subjective and objective factors. Memory success is associated with activity modulation in the hippocampus both for faces and for scenes. Memory failures correlated with lower hippocampal activity for scenes, but not for faces. Activity changed during retrieval on similar areas activated during encoding. There was a considerable impact of RTs on memory-related areas. Objective perceptual identity correlated with activity in the left MTL, while subjective memory experience correlated with activity in the right MTL for both types of material. Overall, the results indicate that MTL activity is heterogeneous, showing both linear and non-linear activity, depending on the factor analyzed. Copyright © 2011 Elsevier B.V. All rights reserved.

46 CFR 160.132-23 - Procedure for approval of design or material change.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 6 2014-10-01 2014-10-01 false Procedure for approval of design or material change. 160.132-23 Section 160.132-23 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Launching Appliances-Davits § 160.132-23 Procedure for approval of...

46 CFR 160.132-23 - Procedure for approval of design or material change.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 6 2013-10-01 2013-10-01 false Procedure for approval of design or material change. 160.132-23 Section 160.132-23 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Launching Appliances-Davits § 160.132-23 Procedure for approval of...

46 CFR 160.176-6 - Procedure for approval of design or material revision.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 6 2014-10-01 2014-10-01 false Procedure for approval of design or material revision. 160.176-6 Section 160.176-6 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Inflatable Lifejackets § 160.176-6 Procedure for approval of design...

46 CFR 160.135-23 - Procedure for approval of design, material, or construction change.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 6 2014-10-01 2014-10-01 false Procedure for approval of design, material, or construction change. 160.135-23 Section 160.135-23 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Lifeboats § 160.135-23 Procedure for approval of...

46 CFR 160.077-7 - Procedure for approval of design or material revision.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 6 2013-10-01 2013-10-01 false Procedure for approval of design or material revision. 160.077-7 Section 160.077-7 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Hybrid Inflatable Personal Flotation Devices § 160.077-7 Procedure...

46 CFR 160.176-6 - Procedure for approval of design or material revision.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 6 2011-10-01 2011-10-01 false Procedure for approval of design or material revision. 160.176-6 Section 160.176-6 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Inflatable Lifejackets § 160.176-6 Procedure for approval of design...

46 CFR 160.077-7 - Procedure for approval of design or material revision.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 6 2014-10-01 2014-10-01 false Procedure for approval of design or material revision. 160.077-7 Section 160.077-7 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Hybrid Inflatable Personal Flotation Devices § 160.077-7 Procedure...

46 CFR 160.077-7 - Procedure for approval of design or material revision.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 6 2011-10-01 2011-10-01 false Procedure for approval of design or material revision. 160.077-7 Section 160.077-7 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Hybrid Inflatable Personal Flotation Devices § 160.077-7 Procedure...

46 CFR 160.176-6 - Procedure for approval of design or material revision.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 6 2013-10-01 2013-10-01 false Procedure for approval of design or material revision. 160.176-6 Section 160.176-6 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Inflatable Lifejackets § 160.176-6 Procedure for approval of design...

46 CFR 160.115-23 - Procedure for approval of design or material change.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 6 2013-10-01 2013-10-01 false Procedure for approval of design or material change. 160.115-23 Section 160.115-23 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Launching Appliances-Winches § 160.115-23 Procedure for approval of...

46 CFR 160.115-23 - Procedure for approval of design or material change.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 6 2014-10-01 2014-10-01 false Procedure for approval of design or material change. 160.115-23 Section 160.115-23 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Launching Appliances-Winches § 160.115-23 Procedure for approval of...

46 CFR 160.135-23 - Procedure for approval of design, material, or construction change.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 6 2013-10-01 2013-10-01 false Procedure for approval of design, material, or construction change. 160.135-23 Section 160.135-23 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Lifeboats (SOLAS) § 160.135-23 Procedure for approva...

Assessing the Readability of Materials for Elementary ESL Pupils.

ERIC Educational Resources Information Center

Baldauf, Richard B., Jr.; Propst, Ivan K., Jr.

This paper assesses the effectiveness of readability indices, standard cloze procedure, and the matching cloze procedure as determinants of the readability of supplementary English materials for elementary ESL students in a Pacific Island context. A review of readability indices and the standard cloze procedure indicated that neither procedure is…

[Certification of suitability of monographs of the European pharmacopoeia].

PubMed

Artiges, A

2002-09-01

In April 1994, t he European Pharmacopoeia Commission set up a new procedure for the "Certification of Suitability of Monographs of the European Pharmacopoela" to deal with the changing requirements of the licensing authorities and the growth of international trade, notably as regards raw materials to be used in the manufacture of medicines. This procedure was the result of extensive collaboration between the licensing authorities of the European Union and the other parties to the European Pharmacopoeia Convention, and it enables a manufacturer of a raw material for pharmaceutical use to demonstrate that the purity of their substance is suitably controlled by the monograph of the European Pharmacopoeia; this demonstration is now required by the guideline on "Requirements in Relation to Active Substances" published in Volume 3A of the Rules Governing Medicinal Products in the European Union. Initially set up in response to problems with impurities of synthesis and residual solvents that can vary from one manufacturer to another, the procedure has gradually been extended to a very wide range of products including products of fermentation and, more recently, products with risk of transmitting agents of animal spongiform encephalopathies.

The effect of different solvents and number of extraction steps on the polyphenol content and antioxidant capacity of basil leaves (Ocimum basilicum L.) extracts.

PubMed

Złotek, Urszula; Mikulska, Sylwia; Nagajek, Małgorzata; Świeca, Michał

2016-09-01

The objectives of this study were to determine best conditions for the extraction of phenolic compounds from fresh, frozen and lyophilized basil leaves. The acetone mixtures with the highest addition of acetic acid extracted most of the phenolic compounds when fresh and freeze-dried material have been used. The three times procedure was more effective than once shaking procedure in most of the extracts obtained from fresh basil leaves - unlike the extracts derived from frozen material. Surprisingly, there were not any significant differences in the content of phenolics between the two used procedures in the case of lyophilized basil leaves used for extraction. Additionally, the positive correlation between the phenolic compounds content and antioxidant activity of the studied extracts has been noted. It is concluded that the acetone mixtures were more effective than the methanol ones for polyphenol extraction. The number of extraction steps in most of the cases was also a statistically significant factor affecting the yield of phenolic extraction as well as antioxidant potential of basil leaf extracts.

Romanian Experience for Enhancing Safety and Security in Transport of Radioactive Material - 12223

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vieru, Gheorghe

2012-07-01

The transport of Dangerous Goods-Class no.7 Radioactive Material (RAM), is an important part of the Romanian Radioactive Material Management. The overall aim of this activity is for enhancing operational safety and security measures during the transport of the radioactive materials, in order to ensure the protection of the people and the environment. The paper will present an overall of the safety and security measures recommended and implemented during transportation of RAM in Romania. Some aspects on the potential threat environment will be also approached with special referring to the low level radioactive material (waste) and NORM transportation either by roadmore » or by rail. A special attention is given to the assessment and evaluation of the possible radiological consequences due to RAM transportation. The paper is a part of the IAEA's Vienna Scientific Research Contract on the State Management of Nuclear Security Regime (Framework) concluded with the Institute for Nuclear Research, Romania, where the author is the CSI (Chief Scientific Investigator). The transport of RAM in Romania is a very sensible and complex problem taking into consideration the importance and the need of the security and safety for such activities. The Romanian Nuclear Regulatory Body set up strictly regulation and procedures according to the Recommendation of the IAEA Vienna and other international organizations. There were implemented the adequate regulation and procedures in order to keep the environmental impacts and the radiological consequences at the lower possible level and to assure the effectiveness of state nuclear security regime due to possible malicious acts in carrying out these activities including transport and the disposal site at the acceptable international levels. The levels of the estimated doses and risk expectation values for transport and disposal are within the acceptable limits provided by national and international regulations and recommendations but can increase, significantly during potential malicious acts. (authors)« less

An 'Early Warning System' for the prevention of dredging potential impacts on sensitive areas

NASA Astrophysics Data System (ADS)

Piermattei, Viviana; Martellucci, Riccardo; Pierattini, Alberto; Bonamano, Simone; Paladini de Mendoza, Francesco; Albani, Marta; Stefanì, Chiara; Madonia, Alice; Fersini, Giorgio; Marcelli, Marco

2016-04-01

Coastal marine ecosystems are increasingly subject to multiple pressures and stressors produced by the effects of human activities. Intense and frequent disturbances which affect marine environment can derive from dredging activity, which is a fundamental management for most ports and harbours. The potential environmental effects of dredging procedures are generally due to the excavation of material from the sea bottom and the relocation elsewhere for disposal, overflow from the dredger and loss of material from pipelines during transport. Depending on the location and the intensity of these activities the marine environment, particularly sensitive areas, may be affected by dredging. The main environmental effects can be associated with suspended sediments and increases in turbidity into the water column, which can have adverse effects on marine animals and plants by reducing light penetration and by physical disturbance. For this reason it is fundamental to implement a real time monitoring system to control and prevent negative effects, enabling a rapid response to adverse water quality conditions and a fast activation of mitigation procedures, in agreement with all the reference authorities. In this work we present the development of an innovative 'Early Warning System' based on fixed stations, ad hoc in situ surveys and forecasting models, which was applied to a dredging activity carried out in the Gulf of Gaeta (Latium, Italy). It represents an extension of the C-CEMS (Civitavecchia Coastal Environmental Monitoring System) network, which is operative in the Tyrrhenian sea since 2005.

Human skeletal muscle behavior in vivo: Finite element implementation, experiment, and passive mechanical characterization.

PubMed

Clemen, Christof B; Benderoth, Günther E K; Schmidt, Andreas; Hübner, Frank; Vogl, Thomas J; Silber, Gerhard

2017-01-01

In this study, useful methods for active human skeletal muscle material parameter determination are provided. First, a straightforward approach to the implementation of a transversely isotropic hyperelastic continuum mechanical material model in an invariant formulation is presented. This procedure is found to be feasible even if the strain energy is formulated in terms of invariants other than those predetermined by the software's requirements. Next, an appropriate experimental setup for the observation of activation-dependent material behavior, corresponding data acquisition, and evaluation is given. Geometry reconstruction based on magnetic resonance imaging of different deformation states is used to generate realistic, subject-specific finite element models of the upper arm. Using the deterministic SIMPLEX optimization strategy, a convenient quasi-static passive-elastic material characterization is pursued; the results of this approach used to characterize the behavior of human biceps in vivo indicate the feasibility of the illustrated methods to identify active material parameters comprising multiple loading modes. A comparison of a contact simulation incorporating the optimized parameters to a reconstructed deformed geometry of an indented upper arm shows the validity of the obtained results regarding deformation scenarios perpendicular to the effective direction of the nonactivated biceps. However, for a valid, activatable, general-purpose material characterization, the material model needs some modifications as well as a multicriteria optimization of the force-displacement data for different loading modes. Copyright © 2016 Elsevier Ltd. All rights reserved.

Survival Learning Materials.

ERIC Educational Resources Information Center

Wilson, Robert M.; Barnes, Marcia M.

This booklet is designed to provide some starter ideas for teachers to use in developing their own packet of learning materials. The procedures suggested and the examples included are literally starters. "Introduction to Survival Learning Materials" presents some procedures to help teachers get started in developing materials. "Following…

A cluster expansion model for predicting activation barrier of atomic processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rehman, Tafizur; Jaipal, M.; Chatterjee, Abhijit, E-mail: achatter@iitk.ac.in

2013-06-15

We introduce a procedure based on cluster expansion models for predicting the activation barrier of atomic processes encountered while studying the dynamics of a material system using the kinetic Monte Carlo (KMC) method. Starting with an interatomic potential description, a mathematical derivation is presented to show that the local environment dependence of the activation barrier can be captured using cluster interaction models. Next, we develop a systematic procedure for training the cluster interaction model on-the-fly, which involves: (i) obtaining activation barriers for handful local environments using nudged elastic band (NEB) calculations, (ii) identifying the local environment by analyzing the NEBmore » results, and (iii) estimating the cluster interaction model parameters from the activation barrier data. Once a cluster expansion model has been trained, it is used to predict activation barriers without requiring any additional NEB calculations. Numerical studies are performed to validate the cluster expansion model by studying hop processes in Ag/Ag(100). We show that the use of cluster expansion model with KMC enables efficient generation of an accurate process rate catalog.« less

Wet Worlds: Explore the World of Water. Marine and Fresh Water Activities for the Elementary Classroom.

ERIC Educational Resources Information Center

Solomon, Gerard; And Others

Complete with student worksheets, field trip ideas, illustrations, vocabulary lists, suggested materials, and step-by-step procedures, the document presents a compilation of ideas for teaching elementary school (K-6) students about marine and fresh water. In the first unit students build miniature monuments and observe the deterioration of…

10 CFR 430.23 - Test procedures for the measurement of energy and water consumption.

Code of Federal Regulations, 2012 CFR

2012-01-01

... (thereby providing materially inaccurate comparative data), a manufacturer must obtain a waiver in... designed to be activated by a lack of door openings shall not be functional during the energy test. B. The... comparative data), a manufacturer must obtain a waiver in accordance with the relevant provisions of 10 CFR...

10 CFR 430.23 - Test procedures for the measurement of energy and water consumption.

Code of Federal Regulations, 2014 CFR

2014-01-01

... (thereby providing materially inaccurate comparative data), a manufacturer must obtain a waiver in... designed to be activated by a lack of door openings shall not be functional during the energy test. B. The... comparative data), a manufacturer must obtain a waiver in accordance with the relevant provisions of 10 CFR...

10 CFR 430.23 - Test procedures for the measurement of energy and water consumption.

Code of Federal Regulations, 2013 CFR

2013-01-01

... (thereby providing materially inaccurate comparative data), a manufacturer must obtain a waiver in... designed to be activated by a lack of door openings shall not be functional during the energy test. B. The... comparative data), a manufacturer must obtain a waiver in accordance with the relevant provisions of 10 CFR...

Review of Use of Animation as a Supplementary Learning Material of Physiology Content in Four Academic Years

ERIC Educational Resources Information Center

Hwang, Isabel; Tam, Michael; Lam, Shun Leung; Lam, Paul

2012-01-01

Dynamic concepts are difficult to explain in traditional media such as still slides. Animations seem to offer the advantage of delivering better representations of these concepts. Compared with static images and text, animations can present procedural information (e.g. biochemical reaction steps, physiological activities) more explicitly as they…

77 FR 74879 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Explosive...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-18

... Underground Gassy Mines ACTION: Notice. SUMMARY: The Department of Labor (DOL) is submitting the Mine Safety... Materials and Blasting Units in Metal and Nonmetal Underground Gassy Mines,'' to the Office of Management... blasting capacity for some metal and nonmetal gassy mines, 30 CFR 57.22606(a) outlines the procedures for a...

Small Schools Language Arts Curriculum, K-3: Scope, Objectives, Activities, Resources, Monitoring Procedures.

ERIC Educational Resources Information Center

Hartl, David, Ed.; And Others

Designed to assist teachers in small schools with the improvement of curriculum and instruction and to help smaller districts that do not have curriculum personnel to comply with Washington's Student Learning Objectives (SLO) Law, this guide contains language arts curriculum materials for grades K-3. Learning objectives are correlated to the Goals…

Small Schools Language Arts Curriculum: Spelling, K-3. Objectives, Word Lists, Resources, Activities, Monitoring Procedures.

ERIC Educational Resources Information Center

Hartl, David, Ed.; And Others

Designed to assist teachers in small schools with the improvement of curriculum and instruction and to help smaller districts without curriculum personnel to comply with Washington's Student Learning Objectives (SLO) Law, this guide contains spelling curriculum materials for grades K-3. The spelling section is part of the total language arts…

77 FR 26317 - Exemption of Material for Proposed Disposal Procedures for the Humboldt Bay Power Plant, Unit 3...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-03

... hazardous waste containing low-activity radioactive debris, at the US Ecology Idaho (USEI) Resource... for the disposal of waste from the HBPP at the US Ecology Idaho (USEI) facility in accordance with 10... significantly impact the quality of the human environment, and that the proposed action is the preferred...

Medical Record Clerk Training Program, Course of Study; Student Manual: For Medical Record Personnel in Small Rural Hospitals in Colorado.

ERIC Educational Resources Information Center

Community Health Service (DHEW/PHS), Arlington, VA. Div. of Health Resources.

The manual provides major topics, objectives, activities and, procedures, references and materials, and assignments for the training program. The topics covered are hospital organization and community role, organization and management of a medical records department, international classification of diseases and operations, medical terminology,…

Successful model of suicide prevention in the Ukraine military environment.

PubMed

Rozanov, Vsevolod A; Mokhovikov, Alexander N; Stiliha, Richard

2002-01-01

The article deals with the problem of suicidal behavior in the Ukraine military environment and gives an example of the successful prevention approach. The model of prevention is based on (1) education of the responsible officers, (2) training of the representatives of the most vulnerable risk groups, and (3) follow-up procedures based on distribution of pocket books for soldiers, educational booklets, and sets of helpful materials for officers. One of the main conclusions is that the prevention activity must be organized as a continuum of actions, seminars, consultations, and materials distribution.

The production of antibacterial tubing, sutures, and bandages by in situ precipitation of metallic salts.

PubMed

Farrah, S R; Erdos, G W

1991-06-01

Two procedures were used to modify gauze bandages, polyester sutures, silicone tubing, and polyvinyl chloride tubing. In one procedure, the materials were first modified by in situ precipitation of metallic hydroxides and then used to adsorb silver ions. In the second procedure, the materials were soaked in sodium pyrophosphate or sodium chloride, dried, and then soaked in silver nitrate. These procedures produced materials with silver deposited on the surface of the tubing and sutures and both on the surface and within the gauze fibers. The modified materials inhibited the growth of Pseudomonas aeruginosa. Escherichia coli, and Staphylococcus aureus in vitro.

A method for subject-specific modelling and optimisation of the cushioning properties of insole materials used in diabetic footwear.

PubMed

Chatzistergos, Panagiotis E; Naemi, Roozbeh; Chockalingam, Nachiappan

2015-06-01

This study aims to develop a numerical method that can be used to investigate the cushioning properties of different insole materials on a subject-specific basis. Diabetic footwear and orthotic insoles play an important role for the reduction of plantar pressure in people with diabetes (type-2). Despite that, little information exists about their optimum cushioning properties. A new in-vivo measurement based computational procedure was developed which entails the generation of 2D subject-specific finite element models of the heel pad based on ultrasound indentation. These models are used to inverse engineer the material properties of the heel pad and simulate the contact between plantar soft tissue and a flat insole. After its validation this modelling procedure was utilised to investigate the importance of plantar soft tissue stiffness, thickness and loading for the correct selection of insole material. The results indicated that heel pad stiffness and thickness influence plantar pressure but not the optimum insole properties. On the other hand loading appears to significantly influence the optimum insole material properties. These results indicate that parameters that affect the loading of the plantar soft tissues such as body mass or a person's level of physical activity should be carefully considered during insole material selection. Copyright © 2015 IPEM. Published by Elsevier Ltd. All rights reserved.

Displacement imprinted polymer receptor analysis (DIPRA) for chlorophenolic contaminants in drinking water and packaging materials.

PubMed

Nicholls, C; Karim, K; Piletsky, S; Saini, S; Setford, S

2006-01-15

The preparation of a molecularly imprinted polymer (MIP) for pentachlorophenol is described together with two alternative reporter derivatives for use in a displacement imprinted polymer receptor analysis (DIPRA) format procedure. In this procedure, alternative reporter molecules were rebound to the synthetic receptor sites and their displacement by the target analyte was employed as the basis of a simple procedure for the measurement of chlorophenols in water and packaging material samples. Water samples were extracted using the standard procedure (EPA 528) and a detection limit of 0.5 microg l(-1) was achieved using the DIPRA detection method, with good agreement between the displacement technique and GC-ECD analysis. A variety of packaging materials, extracted using a buffered detergent solution were also analysed using the DIPRA procedure and showed good agreement with GC results. In addition, investigation of the cross-reactivity of a range of pesticides and materials commonly encountered in environmental analysis indicated the procedure gave good discrimination between pesticides bearing a chlorophenolic moiety and other materials. The procedure is considered highly suitable for use as a rapid field-test method or for incorporation into a test kit device.

The Aesthetic Turn in Mental Health: Reflections on an Explorative Study into Practices in the Arts Therapies.

PubMed

Samaritter, Rosemarie

2018-04-23

The paper will draw on materials from arts therapies literature and comments from experts’ panels to discuss some specific characteristics of the arts therapies and to investigate the role of aesthetic engagement for resilience and mental well-being. The arts increasingly find their way as interventions in mental health domains. However, explorations into the specific mechanisms that underpin the therapeutic effect of arts-based activities are still scarce. Qualitative data were collected from a thematic literature review and expert comments on meaningful working procedures in arts therapies. Analysis of multiple data sources revealed core themes and core procedures that occur across arts therapy modalities. This paper presents a practice informed model of arts-based methods in mental health that may serve as a conceptual frame of reference for arts therapists and as study material on the applicability of arts therapy interventions for specific mental health settings.

The Aesthetic Turn in Mental Health: Reflections on an Explorative Study into Practices in the Arts Therapies

PubMed Central

Samaritter, Rosemarie

2018-01-01

The paper will draw on materials from arts therapies literature and comments from expert panels to discuss some specific characteristics of the arts therapies and to investigate the role of aesthetic engagement for resilience and mental well-being. The arts increasingly find their way as interventions in mental health domains. However, explorations into the specific mechanisms that underpin the therapeutic effect of arts-based activities are still scarce. Qualitative data were collected from a thematic literature review and experts’ comments on meaningful working procedures in arts therapies. Analysis of multiple data sources revealed core themes and core procedures that occur across arts therapy modalities. This paper presents a practice informed model of arts-based methods in mental health that may serve as a conceptual frame of reference for arts therapists and as study material on the applicability of arts therapy interventions for specific mental health settings. PMID:29690592

Evaluation of radiochemical neutron activation analysis methods for determination of arsenic in biological materials.

PubMed

Paul, Rick L

2011-01-01

Radiochemical neutron activation analysis (RNAA) with retention on hydrated manganese dioxide (HMD) has played a key role in the certification of As in biological materials at NIST. Although this method provides very high and reproducible yields and detection limits at low microgram/kilogram levels, counting geometry uncertainties may arise from unequal distribution of As in the HMD, and arsenic detection limits may not be optimal due to significant retention of other elements. An alternate RNAA procedure with separation of arsenic by solvent extraction has been investigated. After digestion of samples in nitric and perchloric acids, As(III) is extracted from 2 M sulfuric acid solution into a solution of zinc diethyldithiocarbamate in chloroform. Counting of (76)As allows quantitation of arsenic. Addition of an (77)As tracer solution prior to dissolution allows correction for chemical yield and counting geometries, further improving reproducibility. The HMD and solvent extraction procedures for arsenic were compared through analysis of SRMs 1577c (bovine liver), 1547 (peach leaves), and 1575a (pine needles). Both methods gave As results in agreement with certified values with comparable reproducibility. However, the solvent extraction method yields a factor of 3 improvement in detection limits and is less time-consuming than the HMD method. The new method shows great promise for use in As certification in reference materials.

Turning Waste into Value: Nanosized Natural Plant Materials of Solanum incanum L. and Pterocarpus erinaceus Poir with Promising Antimicrobial Activities

PubMed Central

Griffin, Sharoon; Tittikpina, Nassifatou Koko; Al-marby, Adel; Alkhayer, Reem; Denezhkin, Polina; Witek, Karolina; Gbogbo, Koffi Apeti; Batawila, Komlan; Duval, Raphaël Emmanuel; Nasim, Muhammad Jawad; Awadh-Ali, Nasser A.; Kirsch, Gilbert; Chaimbault, Patrick; Schäfer, Karl-Herbert; Keck, Cornelia M.; Handzlik, Jadwiga; Jacob, Claus

2016-01-01

Numerous plants are known to exhibit considerable biological activities in the fields of medicine and agriculture, yet access to their active ingredients is often complicated, cumbersome and expensive. As a consequence, many plants harbouring potential drugs or green phyto-protectants go largely unnoticed, especially in poorer countries which, at the same time, are in desperate need of antimicrobial agents. As in the case of plants such as the Jericho tomato, Solanum incanum, and the common African tree Pterocarpus erinaceus, nanosizing of original plant materials may provide an interesting alternative to extensive extraction and isolation procedures. Indeed, it is straightforward to obtain considerable amounts of such common, often weed-like plants, and to mill the dried material to more or less uniform particles of microscopic and nanoscopic size. These particles exhibit activity against Steinernema feltiae or Escherichia coli, which is comparable to the ones seen for processed extracts of the same, respective plants. As S. feltiae is used as a model nematode indicative of possible phyto-protective uses in the agricultural arena, these findings also showcase the potential of nanosizing of crude “waste” plant materials for specific practical applications, especially—but not exclusively—in developing countries lacking a more sophisticated industrial infrastructure. PMID:27104554

The Validity of the earth and space science learning materials with orientation on multiple intelligences and character education

NASA Astrophysics Data System (ADS)

Liliawati, W.; Utama, J. A.; Ramalis, T. R.; Rochman, A. A.

2018-03-01

Validation of the Earth and Space Science learning the material in the chapter of the Earth's Protector based on experts (media & content expert and practitioners) and junior high school students' responses are presented. The data came from the development phase of the 4D method (Define, Design, Develop, Dissemination) which consist of two steps: expert appraisal and developmental testing. The instrument employed is rubric of suitability among the book contents with multiple intelligences activities, character education, a standard of book assessment, a questionnaires and close procedure. The appropriateness of the book contents with multiple intelligences, character education and standard of book assessment is in a good category. Meanwhile, students who used the book in their learning process gave a highly positive response; the book was easy to be understood. In general, the result of cloze procedure indicates high readability of the book. As our conclusion is the book chapter of the Earth's Protector can be used as a learning material accommodating students’ multiple intelligences and character internalization.

The effects of the sequential addition of synthesis parameters on the performance of alkali activated fly ash mortar

NASA Astrophysics Data System (ADS)

Dassekpo, Jean-Baptiste Mawulé; Zha, Xiaoxiong; Zhan, Jiapeng; Ning, Jiaqian

Geopolymer is an energy efficient and sustainable material that is currently used in construction industry as an alternative for Portland cement. As a new material, specific mix design method is essential and efforts have been made to develop a mix design procedure with the main focus on achieving better compressive strength and economy. In this paper, a sequential addition of synthesis parameters such as fly ash-sand, alkaline liquids, plasticizer and additional water at well-defined time intervals was investigated. A total of 4 mix procedures were used to study the compressive performance on fly ash-based geopolymer mortar and the results of each method were analyzed and discussed. Experimental results show that the sequential addition of sodium hydroxide (NaOH), sodium silicate (Na2SiO3), plasticizer (PL), followed by adding water (WA) increases considerably the compressive strengths of the geopolymer-based mortar. These results clearly demonstrate the high significant influence of sequential addition of synthesis parameters on geopolymer materials compressive properties, and also provide a new mixing method for the preparation of geopolymer paste, mortar and concrete.

Activity-based costing in radiology. Application in a pediatric radiological unit.

PubMed

Laurila, J; Suramo, I; Brommels, M; Tolppanen, E M; Koivukangas, P; Lanning, P; Standertskjöld-Nordenstam, G

2000-03-01

To get an informative and detailed picture of the resource utilization in a radiology department in order to support its pricing and management. A system based mainly on the theoretical foundations of activity-based costing (ABC) was designed, tested and compared with conventional costing. The study was performed at the Pediatric Unit of the Department of Radiology, Oulu University Hospital. The material consisted of all the 7,452 radiological procedures done in the unit during the first half of 1994, when both methods of costing where in use. Detailed cost data were obtained from the hospital financial and personnel systems and then related to activity data captured in the radiology information system. The allocation of overhead costs was greatly reduced by the introduction of ABC compared to conventional costing. The overhead cost as a percentage of total costs dropped to one-fourth of total costs, from 57% to 16%. The change of unit costs of radiological procedures varied from -42% to +82%. Costing is much more detailed and precise, and the percentage of unspecified allocated overhead costs diminishes drastically when ABC is used. The new information enhances effective departmental management, as the whole process of radiological procedures is identifiable by single activities, amenable to corrective actions and process improvement.

46 CFR 197.206 - Substitutes for required equipment, materials, apparatus, arrangements, procedures, or tests.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Substitutes for required equipment, materials, apparatus... Operations General § 197.206 Substitutes for required equipment, materials, apparatus, arrangements, procedures, or tests. (a) The Coast Guard may accept substitutes for equipment, materials, apparatus...

46 CFR 197.206 - Substitutes for required equipment, materials, apparatus, arrangements, procedures, or tests.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Substitutes for required equipment, materials, apparatus... Operations General § 197.206 Substitutes for required equipment, materials, apparatus, arrangements, procedures, or tests. (a) The Coast Guard may accept substitutes for equipment, materials, apparatus...

Anchorage of iron hydro(oxide) nanoparticles onto activated carbon to remove As(V) from water.

PubMed

Nieto-Delgado, Cesar; Rangel-Mendez, Jose Rene

2012-06-01

The adsorption of arsenic (V) by granular iron hydro(oxides) has been proven to be a reliable technique. However, due to the low mechanical properties of this material, it is difficult to apply it in full scale water treatment. Hence, the aim of this research is to develop a methodology to anchor iron hydro(oxide) nanoparticles onto activated carbon, in which the iron hydro(oxide) nanoparticles will give the activated carbon an elevated active surface area for arsenic adsorption and also help avoid the blockage of the activated carbon pores. Three activated carbons were modified by employing the thermal hydrolysis of iron as the anchorage procedure. The effects of hydrolysis temperature (60-120 °C), hydrolysis time (4-16 h), and FeCl(3) concentration (0.4-3 mol Fe/L) were studied by the surface response methodology. The iron content of the modified samples ranged from 0.73 to 5.27%, with the higher end of the range pertaining to the carbons with high oxygen content. The materials containing smaller iron hydro(oxide) particles exhibited an enhanced arsenic adsorption capacity. The best adsorbent material reported an arsenic adsorption capacity of 4.56 mg As/g at 1.5 ppm As at equilibrium and pH 7. Copyright © 2012 Elsevier Ltd. All rights reserved.

Small Schools Reading Curriculum, 7-8: Reading, Language Arts, Mathematics, Science, Social Studies. Scope, Objectives, Activities, Resources, Monitoring Procedures.

ERIC Educational Resources Information Center

Hartl, David, Ed.; And Others

Designed to assist teachers in small schools with the improvement of curriculum and instruction and to help smaller districts which do not have curriculum personnel to comply with Washington's Student Learning Objectives (SLO) Law, this guide contains reading curriculum materials for grades 7 and 8. The objectives listed are correlated to the…

Small Schools Reading Curriculum, 4-6: Reading, Language Arts, Mathematics, Science, Social Studies. Scope, Objectives, Activities, Resources, Monitoring Procedures.

ERIC Educational Resources Information Center

Hartl, David, Ed.; And Others

Designed to assist teachers in small schools with the improvement of curriculum and instruction and to help smaller districts which do not have curriculum personnel to comply with Washington's Student Learning Objectives (SLO) Law, this guide contains reading curriculum materials for grades 4-6. The objectives listed are correlated to the Goals…

Small Schools Reading Curriculum, K-3: Reading, Language Arts, Mathematics, Science, Social Studies. Scope, Objectives, Activities, Resources, Monitoring Procedures.

ERIC Educational Resources Information Center

Hartl, David, Ed.; And Others

Designed to assist teachers in small schools with the improvement of curriculum and instruction and to help smaller districts which do not have curriculum personnel to comply with Washington's Student Learning Objectives (SLO) Law, this guide contains reading curriculum materials for grades K-3. The objectives listed are correlated to the Goals…

33 CFR Appendix C to Part 325 - Procedures for the Protection of Historic Properties

Code of Federal Regulations, 2014 CFR

2014-07-01

... a property which has historical importance to any person or group. This term includes the types of... authorizing the work or structures. The following three tests must all be satisfied for an activity undertaken... three tests are satisfied for the dredged material disposal site and it too is in the “permit area” even...

Characterization of optically actuated MRI-compatible active needles for medical interventions

NASA Astrophysics Data System (ADS)

Black, Richard J.; Ryu, Seokchang; Moslehi, Behzad; Costa, Joannes M.

2014-03-01

The development of a Magnetic Resonance Imaging (MRI) compatible optically-actuated active needle for guided percutaneous surgery and biopsy procedures is described. Electrically passive MRI-compatible actuation in the small diameter needle is provided by non-magnetic materials including a shape memory alloy (SMA) subject to precise fiber laser operation that can be from a remote (e.g., MRI control room) location. Characterization and optimization of the needle is facilitated using optical fiber Bragg grating (FBG) temperature sensors arrays. Active bending of the needle during insertion allows the needle to be accurately guided to even relatively small targets in an organ while avoiding obstacles and overcoming undesirable deviations away from the planned path due to unforeseen or unknowable tissue interactions. This feature makes the needle especially suitable for use in image-guided surgical procedures (ranging from MRI to CT and ultrasound) when accurate targeting is imperative for good treatment outcomes. Such interventions include reaching small tumors in biopsies, delineating freezing areas in, for example, cryosurgery and improving the accuracy of seed placement in brachytherapy. Particularly relevant are prostate procedures, which may be subject to pubic arch interference. Combining diagnostic imaging and actuation assisted biopsy into one treatment can obviate the need for a second exam for guided biopsy, shorten overall procedure times (thus increasing operating room efficiencies), address healthcare reimbursement constraints and, most importantly, improve patient comfort and clinical outcomes.

Radiation protection for manned space activities

NASA Technical Reports Server (NTRS)

Jordan, T. M.

1983-01-01

The Earth's natural radiation environment poses a hazard to manned space activities directly through biological effects and indirectly through effects on materials and electronics. The following standard practices are indicated that address: (1) environment models for all radiation species including uncertainties and temporal variations; (2) upper bound and nominal quality factors for biological radiation effects that include dose, dose rate, critical organ, and linear energy transfer variations; (3) particle transport and shielding methodology including system and man modeling and uncertainty analysis; (4) mission planning that includes active dosimetry, minimizes exposure during extravehicular activities, subjects every mission to a radiation review, and specifies operational procedures for forecasting, recognizing, and dealing with large solar flaes.

Toward Worldwide Hepcidin Assay Harmonization: Identification of a Commutable Secondary Reference Material.

PubMed

van der Vorm, Lisa N; Hendriks, Jan C M; Laarakkers, Coby M; Klaver, Siem; Armitage, Andrew E; Bamberg, Alison; Geurts-Moespot, Anneke J; Girelli, Domenico; Herkert, Matthias; Itkonen, Outi; Konrad, Robert J; Tomosugi, Naohisa; Westerman, Mark; Bansal, Sukhvinder S; Campostrini, Natascia; Drakesmith, Hal; Fillet, Marianne; Olbina, Gordana; Pasricha, Sant-Rayn; Pitts, Kelly R; Sloan, John H; Tagliaro, Franco; Weykamp, Cas W; Swinkels, Dorine W

2016-07-01

Absolute plasma hepcidin concentrations measured by various procedures differ substantially, complicating interpretation of results and rendering reference intervals method dependent. We investigated the degree of equivalence achievable by harmonization and the identification of a commutable secondary reference material to accomplish this goal. We applied technical procedures to achieve harmonization developed by the Consortium for Harmonization of Clinical Laboratory Results. Eleven plasma hepcidin measurement procedures (5 mass spectrometry based and 6 immunochemical based) quantified native individual plasma samples (n = 32) and native plasma pools (n = 8) to assess analytical performance and current and achievable equivalence. In addition, 8 types of candidate reference materials (3 concentrations each, n = 24) were assessed for their suitability, most notably in terms of commutability, to serve as secondary reference material. Absolute hepcidin values and reproducibility (intrameasurement procedure CVs 2.9%-8.7%) differed substantially between measurement procedures, but all were linear and correlated well. The current equivalence (intermeasurement procedure CV 28.6%) between the methods was mainly attributable to differences in calibration and could thus be improved by harmonization with a common calibrator. Linear regression analysis and standardized residuals showed that a candidate reference material consisting of native lyophilized plasma with cryolyoprotectant was commutable for all measurement procedures. Mathematically simulated harmonization with this calibrator resulted in a maximum achievable equivalence of 7.7%. The secondary reference material identified in this study has the potential to substantially improve equivalence between hepcidin measurement procedures and contributes to the establishment of a traceability chain that will ultimately allow standardization of hepcidin measurement results. © 2016 American Association for Clinical Chemistry.

Compositional characteristics of some Apollo 14 clastic materials.

NASA Technical Reports Server (NTRS)

Lindstrom, M. M.; Duncan, A. R.; Fruchter, J. S.; Mckay, S. M.; Stoeser, J. W.; Goles, G. G.; Lindstrom, D. J.

1972-01-01

Eighty-two subsamples of Apollo 14 materials have been analyzed by instrumental neutron activation analysis techniques for as many as 25 elements. In many cases, it was necessary to develop new procedures to allow analyses of small specimens. Compositional relationships among Apollo 14 materials indicate that there are small but systematic differences between regolith from the valley terrain and that from Cone Crater ejecta. Fragments from 1-2 mm size fractions of regolith samples may be divided into compositional classes, and the 'soil breccias' among them are very similar to valley soils. Multicomponent linear mixing models have been used as interpretive tools in dealing with data on regolith fractions and subsamples from breccia 14321. These mixing models show systematic compositional variations with inferred age for Apollo 14 clastic materials.

Neutron Spectrometry for Identification of filler material in UXO - Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bliss, Mary

2007-09-12

Unexploded ordnance (UXO)-contaminated sites often include ordnance filled with inert substances that were used in dummy rounds. During UXO surveys, it is difficult to determine whether ordnance is filled with explosives or inert material (e.g., concrete, plaster-of-paris, wax, etc.) or is empty. Without verification of the filler material, handling procedures often necessitate that the object be blown in place, which has potential impacts to the environment, personnel, communities and survey costs. The Department of Defense (DoD) needs a reliable, timely, non-intrusive and cost-effective way to identify filler material before a removal action. A new technology that serves this purpose wouldmore » minimize environmental impacts, personnel safety risks and removal costs; and, thus, would be especially beneficial to remediation activities.« less

Wearable strain sensors based on thin graphite films for human activity monitoring

NASA Astrophysics Data System (ADS)

Saito, Takanari; Kihara, Yusuke; Shirakashi, Jun-ichi

2017-12-01

Wearable health-monitoring devices have attracted increasing attention in disease diagnosis and health assessment. In many cases, such devices have been prepared by complicated multistep procedures which result in the waste of materials and require expensive facilities. In this study, we focused on pyrolytic graphite sheet (PGS), which is a low-cost, simple, and flexible material, used as wearable devices for monitoring human activity. We investigated wearable devices based on PGSs for the observation of elbow and finger motions. The thin graphite films were fabricated by cutting small films from PGSs. The wearable devices were then made from the thin graphite films assembled on a commercially available rubber glove. The human motions could be observed using the wearable devices. Therefore, these results suggested that the wearable devices based on thin graphite films may broaden their application in cost-effective wearable electronics for the observation of human activity.

Imidazolium-Functionalized Carbon Nanohorns for the Conversion of Carbon Dioxide: Unprecedented Increase of Catalytic Activity after Recycling.

PubMed

Calabrese, Carla; Liotta, Leonarda F; Carbonell, Esther; Giacalone, Francesco; Gruttadauria, Michelangelo; Aprile, Carmela

2017-03-22

Six new hybrid materials composed of carbon nanohorns (CNHs) and highly cross-linked imidazolium salts were easily synthesized using a one-step procedure based on the radical oligomerization of bis-vinylimidazolium salts (bVImiX) in the presence of pristine CNHs. The hybrid materials were characterized and employed as the sole catalysts for the conversion of carbon dioxide into cyclic carbonate by reaction with epoxides. The solids displayed excellent turnover number and productivity. Moreover, four catalysts were investigated in recycling experiments. Two catalysts containing an octyl linker between the imidazolium units and a bromide or an iodide anion showed no loss in activity after three cycles. The other two catalysts containing a p-xylyl linker and a bromide anion and different CNHs/bVImiX ratios showed an unprecedented increase of activity after recycling. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Antibacterial nanosilver coated orthodontic bands with potential implications in dentistry.

PubMed

Prabha, Rahul Damodaran; Kandasamy, Rajasigamani; Sivaraman, U Sajeev; Nandkumar, Maya A; Nair, Prabha D

2016-10-01

Fixed orthodontic treatment, an indispensable procedure in orthodontics, necessitates insertion of dental bands. Insertion of band material could also introduce a site of plaque retention. It was hypothesized that band materials with slow-release antimicrobial properties could help in sustained infection control, prevention of dental plaque formation and further associated health risks. Considering the known antimicrobial proprieties of silver, a coating of silver nanoparticle (SNP) onto the stainless steel bands was done and characterized for its beneficial properties in the prevention of plaque accumulation. Coatings of SNPs on conventional stainless steel dental bands were prepared using thermal evaporation technology. The coated dental bands were characterized for their physicochemical properties and evaluated for antimicrobial activity and biocompatibility. The physiochemical characterization of band material both coated and uncoated was carried out using scanning electron microscope, energy dispersive spectroscopy, atomic force microscopyand contact angle test. Biocompatibility tests for coated band material were carried using L929 mouse fibroblast cell culture and MTT [3-(4, 5-dimethyl thiazol-2-yl)-2, 5-diphenyl tetrazolium bromide] assay. Antimicrobial activity of coated band material against Gram-positive bacteria was tested. A stable and uniform coating of SNPs was obtained. The coated band materials were biocompatible as well as possessed distinct antimicrobial activity. The SNP coated dental bands could be potential antimicrobial dental bands for future clinical use. Further studies need to be done to validate the efficiency of coated band materials in oral environments.

Civil Courts.

ERIC Educational Resources Information Center

Eaneman, Paulette S.; And Others

These materials are part of the Project Benchmark series designed to teach secondary students about our legal concepts and systems. This unit focuses on the structure and procedures of the civil court systems. The materials outline common law heritage, kinds of cases, jurisdiction, civil pretrial procedure, trial procedure, and a sample automobile…

40 CFR 246.202-6 - Recommended procedures: Cost analysis.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., storage and transportation costs have been made, and estimated tonnages of both recoverable material and...) SOLID WASTES SOURCE SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures... paper sales and savings from diverting recycled materials from disposal. Potential costs to upgrade...

40 CFR 246.201-7 - Recommended procedures: Cost analysis.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., storage and transportation costs have been made, and estimated tonnages of both recoverable materials and...) SOLID WASTES SOURCE SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures... paper sales and savings from diverting recycled materials from disposal. Potential costs to upgrade...

The selection of adhesive systems for resin-based luting agents.

PubMed

Carville, Rebecca; Quinn, Frank

2008-01-01

The use of resin-based luting agents is ever expanding with the development of adhesive dentistry. A multitude of different adhesive systems are used with resin-based luting agents, and new products are introduced to the market frequently. Traditional adhesives generally required a multiple step bonding procedure prior to cementing with active resin-based luting materials; however, combined agents offer a simple application procedure. Self-etching 'all-in-one' systems claim that there is no need for the use of a separate adhesive process. The following review addresses the advantages and disadvantages of the available adhesive systems used with resin-based luting agents.

Metrologically Traceable Determination of the Water Content in Biopolymers: INRiM Activity

NASA Astrophysics Data System (ADS)

Rolle, F.; Beltramino, G.; Fernicola, V.; Sega, M.; Verdoja, A.

2017-03-01

Water content in materials is a key factor affecting many chemical and physical properties. In polymers of biological origin, it influences their stability and mechanical properties as well as their biodegradability. The present work describes the activity carried out at INRiM on the determination of water content in samples of a commercial starch-derived biopolymer widely used in shopping bags (Mater-Bi^{circledR }). Its water content, together with temperature, is the most influencing parameter affecting its biodegradability, because of the considerable impact on the microbial activity which is responsible for the biopolymer degradation in the environment. The main scope of the work was the establishment of a metrologically traceable procedure for the determination of water content by using two electrochemical methods, namely coulometric Karl Fischer (cKF) titration and evolved water vapour (EWV) analysis. The obtained results are presented. The most significant operational parameters were considered, and a particular attention was devoted to the establishment of metrological traceability of the measurement results by using appropriate calibration procedures, calibrated standards and suitable certified reference materials. Sample homogeneity and oven-drying temperature were found to be the most important influence quantities in the whole water content measurement process. The results of the two methods were in agreement within the stated uncertainties. Further development is foreseen for the application of cKF and EWV to other polymers.

Considerations regarding the unintended radiation exposure of the embryo, fetus or nursing child

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

In Commentary No. 7, Misadministration of Radioactive Material in Medicine - Scientific Background (NCRP, 1991), the National Council on Radiation Protection and Measurements (NCRP) reviewed the misadministration of radioactive material in medicine. In that commentary, the number and variety of nuclear medicine procedures performed in the United States, administered activities and the resulting radiation doses were reviewed. Information on the reported frequency and nature of misadministrations was also summarized, as were the possible deterministic and stochastic effects that might occur as a result of the use in medicine of pharmaceuticals containing radioactive material. In addition, the basis for developing reportingmore » requirements for the unintended administration of radioactive material to patients was also provided. The purpose of this Commentary is: (1) to draw special attention to problems in the protection of the embryo, fetus and nursing child that might result from the use, both externally and internally, of radioactive material in the medical diagnosis and treatment of the mother, and (2) to assist the Nuclear Regulatory Commission (NRC) in developing requirements appropriate to dealing with the unintended exposure of the embryo, fetus or nursing child as a result of such procedures. The sensitivity of humans during these stages of life justify separate consideration beyond that already given for adults in NCRP Commentary No. 7 (NCRP, 1991).« less

Mechanisms of deterioration of nutrients. [freeze drying methods for space flight food

NASA Technical Reports Server (NTRS)

Karel, M.; Flink, J. M.

1974-01-01

Methods are reported by which freeze dried foods of improved quality will be produced. The applicability of theories of flavor retention has been demonstrated for a number of food polymers, both proteins and polysacchardies. Studies on the formation of structures during freeze drying have been continued for emulsified systems. Deterioration of organoleptic quality of freeze dried foods due to high temperature heating has been evaluated and improved procedures developed. The influence of water activity and high temperature on retention of model flavor materials and browning deterioration has been evaluated for model systems and food materials.

Ultrasound-assisted enzymatic extraction and antioxidant activity of polysaccharides from pumpkin (Cucurbita moschata).

PubMed

Wu, Hao; Zhu, Junxiang; Diao, Wenchao; Wang, Chengrong

2014-11-26

An efficient ultrasound-assisted enzymatic extraction (UAEE) of Cucurbita moschata polysaccharides (CMCP) was established and the CMCP antioxidant activities were studied. The UAEE operating parameters (extraction temperature, ultrasonic power, pH, and liquid-to-material ratio) were optimized using the central composite design (CCD) and the mass transfer kinetic study in UAEE procedure was used to select the optimal extraction time. Enzymolysis and ultrasonication that were simultaneously conducted was selected as the UAEE synergistic model and the optimum extraction conditions with a maximum polysaccharide yield of 4.33 ± 0.15% were as follows: extraction temperature, 51.5 °C; ultrasonic power, 440 W; pH, 5.0; liquid-to-material ratio, 5.70:1 mL/g; and extraction time, 20 min. Evaluation of the antioxidant activity in vitro suggested that CMCP has good potential as a natural antioxidant used in the food or medicine industry because of their high reducing power and positive radical scavenging activity for DPPH radical. Copyright © 2014 Elsevier Ltd. All rights reserved.

Alternative complement pathway activation during invasive coronary procedures in acute myocardial infarction and stable angina pectoris.

PubMed

Horváth, Zsófia; Csuka, Dorottya; Vargova, Katarina; Kovács, Andrea; Leé, Sarolta; Varga, Lilian; Préda, István; Tóth Zsámboki, Emese; Prohászka, Zoltán; Kiss, Róbert Gábor

2016-12-01

The effect of invasive percutaneous coronary procedures on complement activation has not been elucidated. We enrolled stable angina patients with elective percutaneous coronary intervention (SA-PCI, n=24), diagnostic coronary angiography (CA, n=52) and 23 patients with ST segment elevation myocardial infarction and primary PCI (STEMI-PCI). Complement activation products (C1rC1sC1inh, C3bBbP and SC5b-9) were measured on admission, 6 and 24h after coronary procedures. The alternative pathway product, C3bBbP significantly and reversibly increased 6h after elective PCI (baseline: 7.81AU/ml, 6h: 16.09AU/ml, 24h: 4.27AU/ml, p<0.01, n=23) and diagnostic angiography (baseline: 6.13AU/ml, 6h: 12.08AU/ml, 24h: 5.4AU/ml, p<0.01, n=52). Six hour C3bBbP values correlated with post-procedural CK, creatinine level and the applied contrast material volume (r=0.41, r=0.4, r=0.3, p<0.05, respectively). In STEMI-PCI, baseline C3bBbP level was higher, compared to SA-PCI or CA patients (11.33AU/ml vs. 7.81AU/ml or 6.13AU/ml, p<0.001). Similarly, the terminal complex (SC5b-9) level was already elevated at baseline compared to SA-PCI group (3.49AU/ml vs. 1.87AU/ml, p=0.011). Complement pathway products did not increase further after primary PCI. Elective coronary procedures induced transient alternative complement pathway activation, influenced by the applied contrast volume. In STEMI, the alternative complement pathway is promptly activated during the atherothrombotic event and PCI itself had no further detectable effect. Copyright © 2016 Elsevier B.V. All rights reserved.

Development of Problem-Based Learning Oriented Teaching Learning Materials to Facilitate Students’ Mastery of Concept and Critical Thinking Skill

NASA Astrophysics Data System (ADS)

Reza, M.; Ibrahim, M.; Rahayu, Y. S.

2018-01-01

This research aims to develop problem-based learning oriented teaching materials to improve students’ mastery of concept and critical thinking skill. Its procedure was divided into two phases; developmental phase and experimental phase. This developmental research used Four-D Model. However, within this research, the process of development would not involve the last stages, which is disseminate. The teaching learning materials which were developed consist of lesson plan, student handbook, student worksheet, achievement test and critical thinking skill test. The experimental phase employs a research design called one group pretest-posttest design. Results show that the validity of the teaching materials which were developed was good and revealed the enhancement of students’ activities with positive response to the teaching learning process. Furthermore, the learning materials improve the students’ mastery of concept and critical thinking skill.

Small Schools Language Arts Curriculum, 4-6: Reading, Language Arts, Mathematics, Science, Social Studies. Scope, Objectives, Activities, Resources, Monitoring Procedures.

ERIC Educational Resources Information Center

Hartl, David, Ed.; And Others

Designed to assist teachers in small schools with the improvement of curriculum and instruction and to help smaller districts that do not have curriculum personnel to comply with Washington's Student Learning Objectives (SLO) Law, this guide contains language arts curriculum materials for grades 4-6. Learning objectives are correlated to the Goals…

Small Schools Language Arts Curriculum, 7-8: Reading, Language Arts, Mathematics, Science, Social Studies. Scope, Objectives, Activities, Resources, Monitoring Procedures.

ERIC Educational Resources Information Center

Hartl, David, Ed.; And Others

Designed to assist teachers in small schools with the improvement of curriculum and instruction and to help smaller districts that do not have curriculum personnel to comply with Washington's Student Learning Objectives (SLO) Law, this guide contains language arts curriculum materials for grades 7-8. Learning objectives are correlated to the Goals…

Annual Research Progress Report.

DTIC Science & Technology

1979-09-30

will be trained in SLRL test procedures and the methodology will be developed for the incorporation of test materials into the standard rearing diet ...requirements exist for system software maintenance and development of software to report dosing data, to calculate diet preparation data, to manage collected...influence of diet and exercise on myo- globin and metmyoglobin reductase were evaluated in the rat. The activity of inetmyo- globin reductase was

40 CFR 65.158 - Performance test procedures for control devices.

Code of Federal Regulations, 2012 CFR

2012-07-01

... loading period during which regulated materials are loaded, and samples shall be collected using... applicable. The regulated material concentration and percent reduction may be measured as either total regulated material or as TOC (minus methane and ethane) according to the procedures specified. (1) Method 1...

40 CFR 65.158 - Performance test procedures for control devices.

Code of Federal Regulations, 2013 CFR

2013-07-01

... loading period during which regulated materials are loaded, and samples shall be collected using... applicable. The regulated material concentration and percent reduction may be measured as either total regulated material or as TOC (minus methane and ethane) according to the procedures specified. (1) Method 1...

40 CFR 65.158 - Performance test procedures for control devices.

Code of Federal Regulations, 2014 CFR

2014-07-01

... loading period during which regulated materials are loaded, and samples shall be collected using... applicable. The regulated material concentration and percent reduction may be measured as either total regulated material or as TOC (minus methane and ethane) according to the procedures specified. (1) Method 1...

Materials Center Collections and Procedures: Suggested Modifications.

ERIC Educational Resources Information Center

Davis, Larry L.

This description of a three year project of services to educators by the Kentucky Department of Education Materials Center includes the current collections, future collections, and the anticipated procedures necessary to provide optimum service and best utilize those materials. The plan involves better coordination between the three major…

47 CFR 36.181 - Material and supplies-Account 1220.

Code of Federal Regulations, 2010 CFR

2010-10-01

... JURISDICTIONAL SEPARATIONS PROCEDURES; STANDARD PROCEDURES FOR SEPARATING TELECOMMUNICATIONS PROPERTY COSTS... Material and Supplies and Cash Working Capital § 36.181 Material and supplies—Account 1220. (a) The amount included in Account 1220 is apportioned among the operations on the basis of the apportionment of the cost...

45 CFR 99.26 - Unsponsored written material.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Unsponsored written material. 99.26 Section 99.26 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION PROCEDURE FOR HEARINGS FOR THE CHILD CARE AND DEVELOPMENT FUND Hearing Procedures § 99.26 Unsponsored written material. Letters...

Leaching of biocides used in façade coatings under laboratory test conditions.

PubMed

Schoknecht, Ute; Gruycheva, Jana; Mathies, Helena; Bergmann, Hannelore; Burkhardt, Michael

2009-12-15

The European Biocidal Products Directive 98/8/EC requires a risk assessment concerning possible effects of active ingredients on the environment. Biocides can be leached from treated materials exposed to outdoor use. These emissions have to be estimated and evaluated during the authorization procedure. Different immersion and irrigation tests were performed to investigate leaching of biocides from façade coatings. Several marketed formulations of textured coatings and paints spiked with a mixture of commonly used active ingredients (OIT, DCOIT, IPBC, carbendazim, isoproturon, diuron, terbutryn, and Irgarol 1051) were investigated. The emission process can be described by time-dependent functions that depend on the test conditions. The results of all test procedures confirm that leachability is related to water solubility and n-octanol-water partition coefficient of the active ingredients and that leaching of biocides from façade coatings is mainly a diffusion controlled process. Other factors like the composition of the product, availability and transport of water, concentration of active ingredients in the coatings, as well as UV-exposure of the coatings influence biocide emissions.

Effect of post-curing treatment on mechanical properties of composite resins.

PubMed

Almeida-Chetti, Verónica A; Macchi, Ricardo L; Iglesias, María E

2014-01-01

The aim of this study is to assess the effect of additional curing procedures on the flexural strength and modulus of elasticity of indirect and direct composite materials. Twenty-four rectangular prism-shaped 2 mm x 2 mm x 25 mm samples of Belleglass, Premisa (Kerr), Adoro and Heliomolar (Ivoclar Vivadent) were prepared. Each composite was packed in an ad-hoc stainless steel device with a TeflonR instrument. A mylar strip and a glass slab were placed on top to obtain a flat surface. Polymerization was activated for 20 seconds with a halogen unit (Astralis 10, Ivoclar - Vivadent) with soft start regime and an output with a 350 to 1200 mw/cm2 range at four different points according to the diameter of the end of the guide. The specimens obtained were then randomly divided into two different groups: with and without additional treatment. In the group with additional treatment, the samples adorro were submitted to 25 minutes in Lumamat 100 (Ivoclar Vivadent) and the rest to 20 minutes in BelleGlass HP (Kerr). After the curing procedures, all samples were treated with sandpapers of decreasing grain size under water flow, and stored in distilled water for 24 h. Flexural strength was measured according to the ISO 404920 recommendations and elastic modulus was determined following the procedures of ANSI/ADA standard No. 27. Statistical differences were found among the different materials and curing procedures employed (P<0.01). The elastic modulus was significantly higher after the additional curing treatment for all materials except Premisa. Further work is needed to determine the association between the actual monomers present in the matrix and the effect of additional curing processes on the mechanical properties of both direct and indirect composites, and its clinical relevance.

A critical analysis of the surgical outcomes for the treatment of Peyronie’s disease

PubMed Central

Mandava, Sree H.; Trost, Landon W.; Hellstrom, Wayne J.G.

2013-01-01

Peyronie’s disease (PD) is a relatively common condition, which can impair sexual function and result in emotional and psychological distress. Despite an abundance of minimally invasive treatments, few have confirmed efficacy for improving penile curvature and function. Surgical therapies include many different techniques and are reserved for patients with stable disease of ⩾12 months’ duration. We searched PubMed for all articles from 1990 to the present relating to the surgical management of PD. Preference was given to recent articles, larger series, and those comparing various techniques and/or materials. Outcomes were subsequently analysed and organised by surgical technique and the graft material used. Available surgical techniques include plication/corporoplasty procedures, incision and grafting (I&G), and placing a penile prosthesis with or without adjunctive procedures. Although several surgical algorithms have been reported, in general, plication/corporoplasty procedures are reserved for patients with adequate erectile function, simple curvatures of <60°, and with no deformities (hour-glass, hinge). I&G are reserved for complex curvatures of >60° and those with deformities. Penile prostheses are indicated for combined erectile dysfunction and PD. Overall outcomes show high rates of improved curvature and patient satisfaction, with mildly decreased erectile function with both plication and the I&G procedure (I&G >plication) and decreases in penile length (plication >I&G). Surgical management of PD remains an excellent treatment option for patients with penile curvature precluding or impairing sexual activity. Surgical algorithms are available to assist treating clinicians in appropriately stratifying surgical candidates. Additional research is needed to identify optimal surgical techniques and materials based on patient and disease characteristics. PMID:26558094

Source imaging of drums in the APNEA system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hensley, D.

1995-12-31

The APNea System is a neutron assay device utilizing both a passive mode and a differential-dieaway active mode. The total detection efficiency is not spatially uniform, even for an empty chamber, and a drum matrix in the chamber can severely distort this response. In order to achieve a response which is independent of the way the source material is distributed in a drum, an imaging procedure has been developed which treats the drum as a number of virtual (sub)volumes. Since each virtual volume of source material is weighted with the appropriate instrument parameters (detection efficiency and thermal flux), the finalmore » assay result is essentially independent of the actual distribution of the source material throughout the drum and its matrix.« less

Driving Procedures. A Resource Guide for Driver Education Teachers.

ERIC Educational Resources Information Center

Texas State Dept. of Public Safety, Austin.

Designed to provide instructors with resource materials for driver education, this book contains mainly materials on established safe driving procedures. An introduction defines a procedure as describing ways in which a driver can comply with the law to do something extra that will increase his/her safety and prevent congestion and collision.…

Preparation of hollow mesoporous carbon spheres and their performances for electrochemical applications

NASA Astrophysics Data System (ADS)

Ariyanto, T.; Zhang, G. R.; Kern, A.; Etzold, B. J. M.

2018-03-01

Hollow carbon materials have received intensive attention for energy storage/conversion applications due to their attractive properties of high conductivity, high surface area, large void and short diffusion pathway. In this work, a novel hollow mesoporous material based on carbide-derived carbon (CDC) is presented. CDC is a new class of carbon material synthesized by the selective extraction of metals from metal carbides. With a two-stage extraction procedure of carbides with chlorine, firstly hybrid core-shell carbon particles were synthesized, i.e. mesoporous/graphitic carbon shells covering microporous/amorphous carbon cores. The amorphous cores were then selectively removed from particles by a careful oxidative treatment utilizing its low thermal characters while the more stable carbon shells remained, thus resulting hollow particles. The characterization methods (e.g. N2 sorption, Raman spectroscopy, temperature-programmed oxidation and SEM) proved the successful synthesis of the aspired material. In electric double-layer capacitor (EDLC) testing, this novel hollow core material showed a remarkable enhancement of EDLC’s rate handling ability (75% at a high scan rate) with respect to an entirely solid-mesoporous material. Furthermore, as a fuel cell catalyst support the material showed higher Pt mass activity (a factor of 1.8) compared to a conventional carbon support for methanol oxidation without noticeably decreasing activity in a long-term testing. Therefore, this carbon nanostructure shows great promises as efficient electrode materials for energy storage and conversion systems.

Guidelines and standard procedures for studies of ground-water quality; selection and installation of wells, and supporting documentation

USGS Publications Warehouse

Lapham, W.W.; Wilde, F.D.; Koterba, M.T.

1997-01-01

This is the first of a two-part report to document guidelines and standard procedures of the U.S. Geological Survey for the acquisition of data in ground-water-quality studies. This report provides guidelines and procedures for the selection and installation of wells for water-quality studies/*, and the required or recommended supporting documentation of these activities. Topics include (1) documentation needed for well files, field folders, and electronic files; (2) criteria and information needed for the selection of water-supply and observation wells, including site inventory and data collection during field reconnaissance; and (3) criteria and preparation for installation of monitoring wells, including the effects of equipment and materials on the chemistry of ground-water samples, a summary of drilling and coring methods, and information concerning well completion, development, and disposition.

A study of the stress wave factor technique for evaluation of composite materials

NASA Technical Reports Server (NTRS)

Duke, J. C., Jr.; Henneke, E. G., II; Kiernan, M. T.; Grosskopf, P. P.

1989-01-01

The acousto-ultrasonic approach for nondestructive evaluation provides a measurement procedure for quantifying the integrated effect of globally distributed damage characteristic of fiber reinforced composite materials. The evaluation procedure provides a stress wave factor that correlates closely with several material performance parameters. The procedure was investigated for a variety of materials including advanced composites, hybrid structure bonds, adhesive bonds, wood products, and wire rope. The research program focused primarily on development of fundamental understanding and applications advancements of acousto-ultrasonics for materials characterization. This involves characterization of materials for which detection, location, and identification of imperfections cannot at present be analyzed satisfactorily with mechanical performance prediction models. In addition to presenting definitive studies on application potentials, the understanding of the acousto-ultrasonic method as applied to advanced composites is reviewed.

77 FR 36017 - Regulatory Guide 7.3, Procedures for Picking Up and Receiving Packages of Radioactive Material

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-15

... Receiving Packages of Radioactive Material AGENCY: Nuclear Regulatory Commission. ACTION: Notice of... Guide (RG) 7.3, ``Procedures for Picking Up and Receiving Packages of Radioactive Material.'' The guide..., ``Administrative Guide for Verifying Compliance with Packaging Requirements for Shipment and Receipt of Radioactive...

20 CFR 422.201 - Material included in this subpart.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Material included in this subpart. 422.201 Section 422.201 Employees' Benefits SOCIAL SECURITY ADMINISTRATION ORGANIZATION AND PROCEDURES Procedures of the Office of Hearings and Appeals § 422.201 Material included in this subpart. This subpart...

Areas of activity in biofilms through the biospeckle and the spectral domain

NASA Astrophysics Data System (ADS)

Marques, J. K.; Braga, R. A.; Pereira, J.

2010-09-01

The dynamic laser speckle or biospeckle laser has been used to analyze the activity of biological and non-biological material by means of various statistical techniques and image processing. However, a challenge to adopt this technique is the ability to identify, in the same material, an area of low activity immersed in an environment of a higher activity. This work was carried out to evaluate the spectral approach associated to biospeckle laser technique as an alternative to identify distinct activities areas in the same material. Biofilm samples, which present well known protocols to be prepared, and a simpler structure than vegetal and animal tissues, were prepared with potato starch and corn starch with areas of different levels of moisture and were analyzed using the biospeckle laser associated with the wavelets transform in order to evaluate the data in the spectral domain. The effect of a black or white background below the samples was also tested. The image analysis was conducted using Generalized Difference and Fujii techniques before and after the implementation of the wavelets transform producing the filtration of the data. The results allowed the visualization of different activities areas in different frequency bands. The areas of activity were presented clearer than the traditional procedures without filtering. A new way to present the results of the biospeckle and the frequency domain information was proposed to enhance the visualization of a whole picture. It was also noted that the greatest contrast between areas of different activity were promoted by materials of different compositions. In some experimental configurations there were possible to tag the relationship between the frequency and depth of the active or inactive material. The influence of the color, black or white, of the background was also noticed in the results, but with white background better in some configurations and with the black better in others.

Implementation of the MPC and A Operations Monitorying (MOM) System at JSC PO Sevmas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Monogarov, A.; Taranenko, V.; Serov,A

The Material Protection, Control and Accounting (MPC&A) Program has been working since 1994 with nuclear sites in Russia to upgrade the physical protection (PP) and material control and accounting (MC&A) functions at facilities containing weapons usable nuclear material. In early 2001, the MPC&A program initiated the MPC&A Operations Monitoring (MOM) Project to monitor facilities where MPC&A upgrades have been installed to provide increased confidence that personnel are present and vigilant, provide confidence that security procedures are being properly performed and provide additional assurance that nuclear materials have not been stolen. The MOM project began as a pilot project at themore » Moscow State Engineering Physics Institute (MEPhI) and a MOM system was successfully installed in October 2001. Following the success of the MEPhI pilot project, the MPC&A Program expanded the installation of MOM systems to several other Russian facilities, including the JSC 'PO' Sevmash', Severodvinsk, Russia. The MOM system was made operational at Sevmash in September, 2008. This paper will discuss the objectives of the MOM system installed at Sevmash and indicate how the objectives influenced the development of the conceptual design. The paper will also describe activities related to installation of the infrastructure and the MOM system at Sevmash. Experience gained from operation of the system and how the objectives are being met will also be discussed. The paper will describe how the MOM system is used at Sevmash and, in particular, how the data is analyzed. Finally, future activities including potential expansion of the MOM system, operator training, data sharing and analysis, procedure development, repair and maintenance will be included in the paper.« less

Comparison of extraction procedures on the immunocontraceptive activity of neem seed extracts.

PubMed

Garg, S; Talwar, G P; Upadhyay, S N

1994-10-01

Azadirachta indica (Neem) seed extracts are known to activate the local cell-mediated immune reactions after a single intrauterine administration, leading to a long term reversible block of fertility. In order to identify and characterize the active fraction responsible for this activity, neem seeds were extracted by both mechanical expression and solvent extraction using a range of polar to non-polar solvents which yielded 3 broad fractions. The mechanically expressed oil was fractionated using different approaches and studied for antifertility activity. The hexane extract and a corresponding column fraction showed potent and reproducible antifertility activity. Other fractions were less stable with regard to reproducibility of effects and composition. It is our conclusion that for subsequent fractionation to reach the last active fraction, the hexane extract is the most useful starting material.

Use of Ultrasound in Reconditioning by Welding of Tools Used in the Process of Regenerating Rubber.

PubMed

Dobrotă, Dan; Petrescu, Valentin

2018-02-10

Addressing the problem of reconditioning large parts is of particular importance, due to their value and to the fact that the technologies for their reconditioning are very complex. The tools used to refine regenerated rubber which measure 660 mm in diameter and 2130 mm in length suffer from a rather fast dimensional wear. Within this research, the authors looked for a welding reconditioning procedure that would allow a very good adhesion between the deposited material layer and the base material. In this regard, the MAG (Metal Active Gas) welding process was used, but the ultrasonic activation of the welding process was also considered. Thus, the wire used for welding was activated considering a variation of the frequency of ultrasounds in the range f = 18-22 kHz respectively of the oscillation amplitude A = 30-60 μm. Under these conditions it was found that the presence of ultrasonic waves during the welding cladding process results in uniform deposition of hard carbons at the grain boundary and in the elimination of any existing oxides on the deposition surface, but at the same time increases the adhesion between the base material and the additional material, all of which positively influence the wear and corrosion resistance of the tools used to refine the regenerated rubber.

Parameters Affecting the Mechanical Properties of Fly Ash-Based Geopolymer Binders – Experimental Results

NASA Astrophysics Data System (ADS)

Lăzărescu, A.; Szilagyi, H.; Ioani, A.; Baeră, C.

2018-06-01

As the demand for concrete and the needs to satisfy development of infrastructure facilities increase, it is essential to find alternatives to create environment-friendly concrete. The particular procedure of alkaline activation of fly ash - in which ash resulting from a power plant is combined with a specific alkaline activator in order to create a solid material, then dried at a certain temperature - opened new opportunities for this new material to get attention worldwide. In order to obtain a material with similar properties of ordinary Portland cement concrete and to obtain desirable compressive strengths, the parameters that affect this type of binders should be fully understood. The aim of this paper is to study the main parameters affecting the mechanical strength of the fly ash-based geopolymer paste and their interactions. Parameters such as molarity of sodium hydroxide (from 8M to 12M) and alkaline activators ratio (from 0,5 to 2,5) were analysed to observe how they affect the mechanical properties of the geopolymer paste. Experimental results show that the compressive strength of the fly ash-based geopolymer paste produced using Romanian local raw materials increases with the increase of the concentration of sodium hydroxide and higher ratios of Na2SiO3/NaOH solution.

Miniature probe for the delivery and monitoring of a photopolymerizable material

NASA Astrophysics Data System (ADS)

Schmocker, Andreas; Khoushabi, Azadeh; Schizas, Constantin; Bourban, Pierre-Etienne; Pioletti, Dominique P.; Moser, Christophe

2015-12-01

Photopolymerization is a common method to cure materials initially in a liquid state, such as dental implants or bone or tissue fillers. Recent advances in the development of biocompatible gel- and cement-systems open up an avenue for in situ photopolymerization. For minimally invasive surgery, such procedures require miniaturized surgical endoscopic probes to activate and control photopolymerization in situ. We present a miniaturized light probe in which a photoactive material can be (1) mixed, pressurized, and injected, (2) photopolymerized/photoactivated, and (3) monitored during the chemical reaction. The device is used to implant and cure poly(ethylene glycol) dimethacrylate-hydrogel-precursor in situ with ultraviolet A (UVA) light (365 nm) while the polymerization reaction is monitored in real time by collecting the fluorescence and Raman signals generated by the 532-nm excitation light source. Hydrogels could be delivered, photopolymerized, and monitored by the probe up to a curing depth of 4 cm. The size of the photopolymerized samples could be correlated to the fluorescent signal collected by the probe, and the reproducibility of the procedure could be demonstrated. The position of the probe tip inside a bovine caudal intervertebral disc could be estimated in vitro based on the collected fluorescence and Raman signal.

Use of fly ash, phosphogypsum and red mud as a liner material for the disposal of hazardous zinc leach residue waste.

PubMed

Coruh, Semra; Ergun, Osman Nuri

2010-01-15

Increasing amounts of residues and waste materials coming from industrial activities in different processes have become an increasingly urgent problem for the future. The release of large quantities of heavy metals into the environment has resulted in a number of environmental problems. The present study investigated the safe disposal of the zinc leach residue waste using industrial residues such as fly ash, phosphogypsum and red mud. In the study, leachability of heavy metals from the zinc leach residue has been evaluated by mine water leaching procedure (MWLP) and toxicity characteristic leaching procedure (TCLP). Zinc removal from leachate was studied using fly ash, phosphogypsum and red mud. The adsorption capacities and adsorption efficiencies were determined. The adsorption rate data was analyzed according to the pseudo-second-order kinetic, Elovich kinetic and intra-particle diffusion kinetic models. The pseudo-second-order kinetic was the best fit kinetic model for the experimental data. The results show that addition of fly ash, phosphogypsum and red mud to the zinc leach residue drastically reduces the heavy metal content in the leachate and could be used as liner materials.

Determination of Optimal Subsidy for Materials Saving Investment through Recycle/Recovery at Industrial Level

NASA Astrophysics Data System (ADS)

Batzias, Dimitris F.

2009-08-01

This work deals with a methodological framework under the form of a simple/short algorithmic procedure (including 11 activity steps and 3 decision nodes) designed/developed for the determination of optimal subsidy for materials saving investment through recycle/recovery (RR) at industrial level. Two case examples are presented, covering both aspects, without and with recycling. The expected Relative Cost Decrease (RCD) because of recycling, which forms a critical index for decision making on subsidizing, is estimated. The developed procedure can be extended outside the industrial unit to include collection/transportation/processing of recyclable wasted products. Since, in such a case, transportation cost and processing cost are conflict depended variables (when the quantity collected/processed Q is the independent/explanatory variable), the determination of Qopt is examined under energy crises conditions, when corresponding subsidies might be granted to re-set the original equilibrium and avoid putting the recycling enterprise in jeopardize due to dangerous lowering of the first break-even point.

Nature-Inspired One-Step Green Procedure for Enhancing the Antibacterial and Antioxidant Behavior of a Chitin Film: Controlled Interfacial Assembly of Tannic Acid onto a Chitin Film.

PubMed

Wang, Yuntao; Li, Jing; Li, Bin

2016-07-20

The final goal of this study was to develop antimicrobial food-contact materials based on a natural phenolic compound (tannic acid) and chitin, which is the second most abundant polysaccharide on earth, using an interfacial assembly approach. Chitin film has poor antibacterial and antioxidant ability, which limits its application in industrial fields such as active packaging. Therefore, in this study, a novel one-step green procedure was applied to introduce antibacterial and antioxidant properties into a chitin film simultaneously by incorporation of tannic acid into the chitin film through interfacial assembly. The antibacterial and antioxidant behavior of chitin film has been greatly enhanced. Hydrogen bonds and hydrophobic interaction were found to be the main driving forces for interfacial assembly. Therefore, controlled interfacial assembly of tannic acid onto a chitin film demonstrated a good way to develop functional materials that can be potentially applied in industry.

Is it time to rebalance the case mix? A portfolio analysis of direct catheterization laboratory costs over a 5-year period.

PubMed

Plehn, Gunnar; Butz, Thomas; Maagh, Petra; Oernek, Ahmet; Meissner, Axel; Plehn, Natalie

2016-11-03

Cardiac catheterization laboratories (CLL) have continued to function as profit centers for hospitals. Due to a high percentage of material and labor costs, they are natural targets for process improvement. Our study applied a contribution margin (CBM) concept to evaluate costs and cost dynamics over a 5-year period. We retrospectively analyzed all procedures performed at a tertiary heart center between 2007 and 2011. Total variable costs, including labor time, material, and maintenance-expenses, were allocated at a global as well as a procedural level. CBM and CBM ratios were calculated by integration of individual DRG revenues. Annual case volume increased from 1288 to 1545. In parallel, overall profitability improved as indicated by a 2% increase in CBM ratio and a higher CBM generated per hour of CLL working time (4325 vs. 5892 €, p < 0.001). Coronary angiography generated higher average CBMs per hour than coronary or electrophysiological interventions (5831 vs. 3458 vs. 1495 €; p < 0.001). The latter are characterized by relatively high per case material expenditures. On a procedural level, DRG-specific trends as a steady improvement of examination time or an increase in material costs were detectable. The CBM concept allows a comprehensive analysis of CLL costs and cost dynamics. From a health service providers view, its range of application includes global profitability analysis, portfolio evaluation, and a detailed cost analysis of specific service lines. From a healthcare payers perspective, it may help to monitor hospital activities and to provide a solid data basis in cases where inappropriate developments are suspected. The calculation principle is simple which may increase user acceptance and thus the motivation of team members.

Comparative study on gamma irradiation and cold plasma pretreatment for a cellulosic substrate modification with phenolic compounds

NASA Astrophysics Data System (ADS)

Irimia, Anamaria; Ioanid, Ghiocel Emil; Zaharescu, Traian; Coroabă, Adina; Doroftei, Florica; Safrany, Agnes; Vasile, Cornelia

2017-01-01

The efficiency of the activation of the cellulose/chitin mix substrate by cold plasma or γ-radiation exposure in order to modify it with bioactive compounds was studied. The eugenol or vegetable oils such as grape seed oil and rosehip seed oil have been grafted onto activated substrate. The examination of modified cellulose/chitin mix substrate by ATR-FTIR spectroscopy, X-ray photoelectron spectroscopy and scanning electron microscopy confirms that the structural and morphological changes took place in both cases. The grafting degrees of the surface layer estimated from XPS data varied from 31.1% to 58.7% for air cold plasma activation and from 9.7% to 22.8% for γ-irradiation treatment. They depend both on bioactive compound used and procedure of substrate activation. Higher grafting degree are obtain by using vegetable oils than in the case of modification with eugenol and the air cold plasma activation seems to be much efficient than γ-irradiation. By grafting the polymeric substrate with bioactive compounds, antimicrobial and antioxidant properties have been conferred. Such materials can be considered promising for food packaging applications and medical textiles and also the applied procedures are environmental friendly ones.

Project health and safety plan for the Gunite and Associated Tanks at Oak Ridge National Laboratory, Oak Ridge, Tennessee

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abston, J.P.

1997-04-01

The Lockheed Martin Energy Systems, Inc. (Energy Systems) policy is to provide a safe and healthful workplace for all employees and subcontractors. The accomplishment of this policy requires that operations at the Gunite and Associated Tanks (GAAT) in the North and South Tank Farms (NTF and STF) at the Department of Energy (DOE) Oak Ridge National Laboratory are guided by an overall plan and consistent proactive approach to health and safety (H and S) issues. The policy and procedures in this plan apply to all GAAT operations in the NTF and STF. The provisions of this plan are to bemore » carried out whenever activities identifies s part of the GAAT are initiated that could be a threat to human health or the environment. This plan implements a policy and establishes criteria for the development of procedures for day-to-day operations to prevent or minimize any adverse impact to the environment and personnel safety and health and to meet standards that define acceptable management of hazardous and radioactive materials and wastes. The plan is written to utilize past experience and best management practices in order to minimize hazards to human health or the environment from events such as fires, explosions, falls, mechanical hazards, or any unplanned release of hazardous or radioactive materials to the air. This plan explains additional task-specific health and safety requirements such as the Site Safety and health Addendum and Activity Hazard Analysis, which should be used in concert with this plan and existing established procedures.« less

Toward the Development of a Model to Estimate the Readability of Credentialing-Examination Materials

ERIC Educational Resources Information Center

Badgett, Barbara A.

2010-01-01

The purpose of this study was to develop a set of procedures to establish readability, including an equation, that accommodates the multiple-choice item format and occupational-specific language related to credentialing examinations. The procedures and equation should be appropriate for learning materials, examination materials, and occupational…

40 CFR 65.158 - Performance test procedures for control devices.

Code of Federal Regulations, 2010 CFR

2010-07-01

... regulated material or as TOC (minus methane and ethane) according to the procedures specified. (1) Method 1... material or TOC, sampling sites shall be located at the inlet of the control device as specified in the... sampling sites shall ensure the measurement of total regulated material or TOC (minus methane and ethane...

46 CFR 160.170-23 - Procedure for approval of design, material, or construction change.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 6 2014-10-01 2014-10-01 false Procedure for approval of design, material, or construction change. 160.170-23 Section 160.170-23 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Davit-Launched Liferaft Automatic Release Hooks ...

46 CFR 160.170-23 - Procedure for approval of design, material, or construction change.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 6 2013-10-01 2013-10-01 false Procedure for approval of design, material, or construction change. 160.170-23 Section 160.170-23 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Davit-Launched Liferaft Automatic Release Hooks ...

Laser-Induced Damage Threshold and Certification Procedures for Optical Materials

NASA Technical Reports Server (NTRS)

1997-01-01

This document provides instructions for performing laser-induced-damage-threshold tests and pass-fail certification tests on optical materials used in pulsed-laser systems. The optical materials to which these procedures apply include coated and uncoated optical substrates, laser crystals, Q-switches, polarizers, and other optical components employed in pulsed-laser systems.

Characterization of Space Environmental Effects on Candidate Solar Sail Material

NASA Technical Reports Server (NTRS)

Edwards, David; Hubbs, Whitney; Stanaland, Tesia; Altstatt, Richard

2002-01-01

The National Aeronautics and Space Administration's (NASA) Marshall Space Flight Center (MSFC) is concentrating research into the utilization of photonic materials for spacecraft propulsion. Spacecraft propulsion, using photonic materials, will be achieved using a solar sail. A sail operates on the principle that photons, originating from the sun, impart pressure and provide a source of spacecraft propulsion. The pressure can be increased, by a factor of two if the sun-facing surface is perfectly reflective. Solar sails are generally composed of a highly reflective metallic front layer, a thin polymeric substrate, and occasionally a highly emissive back surface. The Space Environmental Effects Team at MSFC is actively characterizing candidate solar sail materials to evaluate the thermo-optical and mechanical properties after exposure to a simulated Geosynchronous Transfer Orbit (GTO) radiation environment. The technique of radiation dose verses material depth profiling was used to determine the orbital equivalent exposure doses. The solar sail exposure procedures and results of the material characterization will be discussed.

Nanoporous TiO2 nanoparticle assemblies with mesoscale morphologies: nano-cabbage versus sea-anemone

NASA Astrophysics Data System (ADS)

Darbandi, Masih; Gebre, Tesfaye; Mitchell, Lucas; Erwin, William; Bardhan, Rizia; Levan, M. Douglas; Mochena, Mogus D.; Dickerson, James H.

2014-05-01

We report the novel synthesis of nanoporous TiO2 nanoparticle ensembles with unique mesoscale morphologies. Constituent nanoparticles evolved into multifaceted assemblies, exhibiting excellent crystallinity and enhanced photocatalytic activity compared with commercial TiO2. Such materials could be exploited for applications, like organic pollutant degradation.We report the novel synthesis of nanoporous TiO2 nanoparticle ensembles with unique mesoscale morphologies. Constituent nanoparticles evolved into multifaceted assemblies, exhibiting excellent crystallinity and enhanced photocatalytic activity compared with commercial TiO2. Such materials could be exploited for applications, like organic pollutant degradation. Electronic supplementary information (ESI) available: Synthesis and characterization procedures, TEM/XRD of samples prepared at different temperature and water content, table of nitrogen adsorption-desorption values of different samples. See DOI: 10.1039/c3nr06154j

Development of potential candidate reference materials for drugs in bottom sediment, cod and herring tissues.

PubMed

Baranowska, Irena; Buszewski, Bogusław; Namieśnik, Jacek; Konieczka, Piotr; Magiera, Sylwia; Polkowska-Motrenko, Halina; Kościelniak, Paweł; Gadzała-Kopciuch, Renata; Woźniakiewicz, Aneta; Samczyński, Zbigniew; Kochańska, Kinga; Rutkowska, Małgorzata

2017-02-01

Regular use of a reference material and participation in a proficiency testing program can improve the reliability of analytical data. This paper presents the preparation of candidate reference materials for the drugs metoprolol, propranolol, carbamazepine, naproxen, and acenocoumarol in freshwater bottom sediment and cod and herring tissues. These reference materials are not available commercially. Drugs (between 7 ng/g and 32 ng/g) were added to the samples, and the spiked samples were freeze-dried, pulverized, sieved, homogenized, bottled, and sterilized by γ-irradiation to prepare the candidate materials. Procedures for extraction and liquid chromatography coupled with tandem mass spectrometry were developed to determine the drugs of interest in the studied material. Each target drug was quantified using two analytical procedures, and the results obtained from these two procedures were in good agreement with each other. Stability and homogeneity assessments were performed, and the relative uncertainties due to instability (for an expiration date of 12 months) and inhomogeneity were 10-25% and 4.0-6.8%, respectively. These procedures will be useful in the future production of reference materials. Copyright © 2016 Elsevier Ltd. All rights reserved.

Report of high quantum efficiency photocathode at Milano

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michelato, P.

R D activity on high quantum efficiency alkali antimonide photocathode is in progress at Milano, in the context of the ARES program. Inside a preliminary preparation chamber, Cs[sub 3]Sb layers with qunatum efficiency up to 9% (at [lambda]=543.5 nm) and lifetime of some days has been recently produced on copper, stainless steel and niobium, using a reproducible deposition procedure adapted to the material of the different substrata.

Internal wall losses of pharmaceutical dusts during closed-face, 37-mm polystyrene cassette sampling.

PubMed

Puskar, M A; Harkins, J M; Moomey, J D; Hecker, L H

1991-07-01

A current practice for the determination of personal exposures to dusts involves the aspiration of known quantities of air through membrane filters held in 37-mm plastic cassettes. Samples are collected with the cassettes in the closed-face configuration. A major negative bias error has been identified with this sampling procedure for low-level pharmaceutical dusts. For the pharmaceuticals studied, on average, 62% of the active dust collected in each sample was found on the inside surface of the cassette top. Only 22% of the total active ingredient of the dust was found on the filters. The remaining 16% was found on the inside of the cassette bottoms; electrostatic attraction appears to be the reason that pharmaceutical dusts adhere to the inside surface of the cassette. Adherence to the inside surfaces of the polystyrene cassette occurs without regard to the type of material used to seal the two-piece cassette together. The use of shrink wrap versus plastic tape versus using no sealing material had no effect on where or how much of the active ingredient was found on the inside cassette surfaces. Because very little active ingredient was identified in backup cassettes, it is hypothesized that the active ingredient found on the inside of the bottom portion of the cassettes (past the filter and support pad) got there by falling off the filter during filter removal from the cassette prior to analysis. To eliminate both of these errors, an internal cassette extraction procedure was developed that (1) negates the error caused by static charging and (2) eliminates the need for opening the cassettes prior to analysis.(ABSTRACT TRUNCATED AT 250 WORDS)

Enhanced Biological Response of AVS-Functionalized Ti-6Al-4V Alloy through Covalent Immobilization of Collagen.

PubMed

Rezvanian, Parsa; Daza, Rafael; López, Patricia A; Ramos, Milagros; González-Nieto, Daniel; Elices, Manuel; Guinea, Gustavo V; Pérez-Rigueiro, José

2018-02-20

This study presents the development of an efficient procedure for covalently immobilizing collagen molecules on AVS-functionalized Ti-6Al-4V samples, and the assessment of the survival and proliferation of cells cultured on these substrates. Activated Vapor Silanization (AVS) is a versatile functionalization technique that allows obtaining a high density of active amine groups on the surface. A procedure is presented to covalently bind collagen to the functional layer using EDC/NHS as cross-linker. The covalently bound collagen proteins are characterized by fluorescence microscopy and atomic force microscopy and their stability is tested. The effect of the cross-linker concentration on the process is assessed. The concentration of the cross-linker is optimized and a reliable cleaning protocol is developed for the removal of the excess of carbodiimide from the samples. The results demonstrate that the covalent immobilization of collagen type I on Ti-6Al-4V substrates, using the optimized protocol, increases the number of viable cells present on the material. Consequently, AVS in combination with the carbodiimide chemistry appears as a robust method for the immobilization of proteins and, for the first time, it is shown that it can be used to enhance the biological response to the material.

Active material for fiber core made by powder-in-tube method: subsequent homogenization by means of stack-and-draw technique

NASA Astrophysics Data System (ADS)

Velmiskin, Vladimir V.; Egorova, Olga N.; Mishkin, Vladimir; Nishchev, Konstantin; Semjonov, Sergey L.

2012-04-01

A procedure for the preparation of optically homogeneous glass for fiber preforms through sintering of coarse oxide particles and further processing of the resultant glass, including several drawing and stacking steps, is described. Reducing the pressure to 10-2 Torr during sintering considerably reduced the amount of gas bubbles in Yb/Al-doped silica glass and decreased the background loss to 100 dB/km after the third drawing-stacking-consolidation cycle. For comparison, a fiber singly doped with alumina was fabricated by the same procedure as above. The level of wavelength- independent losses in that fiber was 65 dB/km.

Plasma dye coating as straightforward and widely applicable procedure for dye immobilization on polymeric materials.

PubMed

De Smet, Lieselot; Vancoillie, Gertjan; Minshall, Peter; Lava, Kathleen; Steyaert, Iline; Schoolaert, Ella; Van De Walle, Elke; Dubruel, Peter; De Clerck, Karen; Hoogenboom, Richard

2018-03-16

Here, we introduce a novel concept for the fabrication of colored materials with significantly reduced dye leaching through covalent immobilization of the desired dye using plasma-generated surface radicals. This plasma dye coating (PDC) procedure immobilizes a pre-adsorbed layer of a dye functionalized with a radical sensitive group on the surface through radical addition caused by a short plasma treatment. The non-specific nature of the plasma-generated surface radicals allows for a wide variety of dyes including azobenzenes and sulfonphthaleins, functionalized with radical sensitive groups to avoid significant dye degradation, to be combined with various materials including PP, PE, PA6, cellulose, and PTFE. The wide applicability, low consumption of dye, relatively short procedure time, and the possibility of continuous PDC using an atmospheric plasma reactor make this procedure economically interesting for various applications ranging from simple coloring of a material to the fabrication of chromic sensor fabrics as demonstrated by preparing a range of halochromic materials.

Analysis of plant gums and saccharide materials in paint samples: comparison of GC-MS analytical procedures and databases

PubMed Central

2012-01-01

Background Saccharide materials have been used for centuries as binding media, to paint, write and illuminate manuscripts and to apply metallic leaf decorations. Although the technical literature often reports on the use of plant gums as binders, actually several other saccharide materials can be encountered in paint samples, not only as major binders, but also as additives. In the literature, there are a variety of analytical procedures that utilize GC-MS to characterize saccharide materials in paint samples, however the chromatographic profiles are often extremely different and it is impossible to compare them and reliably identify the paint binder. Results This paper presents a comparison between two different analytical procedures based on GC-MS for the analysis of saccharide materials in works-of-art. The research presented here evaluates the influence of the analytical procedure used, and how it impacts the sugar profiles obtained from the analysis of paint samples that contain saccharide materials. The procedures have been developed, optimised and systematically used to characterise plant gums at the Getty Conservation Institute in Los Angeles, USA (GCI) and the Department of Chemistry and Industrial Chemistry of the University of Pisa, Italy (DCCI). The main steps of the analytical procedures and their optimisation are discussed. Conclusions The results presented highlight that the two methods give comparable sugar profiles, whether the samples analysed are simple raw materials, pigmented and unpigmented paint replicas, or paint samples collected from hundreds of centuries old polychrome art objects. A common database of sugar profiles of reference materials commonly found in paint samples was thus compiled. The database presents data also from those materials that only contain a minor saccharide fraction. This database highlights how many sources of saccharides can be found in a paint sample, representing an important step forward in the problem of identifying polysaccharide binders in paint samples. PMID:23050842

Analysis of plant gums and saccharide materials in paint samples: comparison of GC-MS analytical procedures and databases.

PubMed

Lluveras-Tenorio, Anna; Mazurek, Joy; Restivo, Annalaura; Colombini, Maria Perla; Bonaduce, Ilaria

2012-10-10

Saccharide materials have been used for centuries as binding media, to paint, write and illuminate manuscripts and to apply metallic leaf decorations. Although the technical literature often reports on the use of plant gums as binders, actually several other saccharide materials can be encountered in paint samples, not only as major binders, but also as additives. In the literature, there are a variety of analytical procedures that utilize GC-MS to characterize saccharide materials in paint samples, however the chromatographic profiles are often extremely different and it is impossible to compare them and reliably identify the paint binder. This paper presents a comparison between two different analytical procedures based on GC-MS for the analysis of saccharide materials in works-of-art. The research presented here evaluates the influence of the analytical procedure used, and how it impacts the sugar profiles obtained from the analysis of paint samples that contain saccharide materials. The procedures have been developed, optimised and systematically used to characterise plant gums at the Getty Conservation Institute in Los Angeles, USA (GCI) and the Department of Chemistry and Industrial Chemistry of the University of Pisa, Italy (DCCI). The main steps of the analytical procedures and their optimisation are discussed. The results presented highlight that the two methods give comparable sugar profiles, whether the samples analysed are simple raw materials, pigmented and unpigmented paint replicas, or paint samples collected from hundreds of centuries old polychrome art objects. A common database of sugar profiles of reference materials commonly found in paint samples was thus compiled. The database presents data also from those materials that only contain a minor saccharide fraction. This database highlights how many sources of saccharides can be found in a paint sample, representing an important step forward in the problem of identifying polysaccharide binders in paint samples.

Optical approach in characterizing dental biomaterials

NASA Astrophysics Data System (ADS)

Demoli, Nazif; Vučić, Zlatko; Milat, Ognjen; Gladić, Jadranko; Lovrić, Davorin; Pandurić, Vlatko; Marović, Danijela; Moguš-Milanković, Andrea; Ristić, Mira; Čalogović, Marina; Tarle, Zrinka

2013-04-01

The purpose of this paper is to present the current activities of a research collaborative program between three institutions from Zagreb (School of Dental Medicine, Institute of Physics, and Institute Ruđer Bo\\vsković). Within the scope of this program, it is planned to investigate and find guidelines for the refinement of the properties of dental biomaterials (DBs) and of procedures in restorative dental medicine. It is also planned to identify and model the dominant mechanisms which control polymerization of DBs. The materials to be investigated include methacrylate based composite resins, new composite materials with amorphous calcium phosphate, silorane based composite resins, glass-ionomer cements, and giomer.

Radioactivity decontamination of materials commonly used as surfaces in general-purpose radioisotope laboratories.

PubMed

Leonardi, Natalia M; Tesán, Fiorella C; Zubillaga, Marcela B; Salgueiro, María J

2014-12-01

In accord with as-low-as-reasonably-achievable and good-manufacturing-practice concepts, the present study evaluated the efficiency of radioactivity decontamination of materials commonly used in laboratory surfaces and whether solvent spills on these materials affect the findings. Four materials were evaluated: stainless steel, a surface comprising one-third acrylic resin and two-thirds natural minerals, an epoxy cover, and vinyl-based multipurpose flooring. Radioactive material was eluted from a (99)Mo/(99m)Tc generator, and samples of the surfaces were control-contaminated with 37 MBq (100 μL) of this eluate. The same procedure was repeated with samples of surfaces previously treated with 4 solvents: methanol, methyl ethyl ketone, acetone, and ethanol. The wet radioactive contamination was allowed to dry and then was removed with cotton swabs soaked in soapy water. The effectiveness of decontamination was defined as the percentage of activity removed per cotton swab, and the efficacy of decontamination was defined as the total percentage of activity removed, which was obtained by summing the percentages of activity in all the swabs required to complete the decontamination. Decontamination using our protocol was most effective and most efficacious for stainless steel and multipurpose flooring. Moreover, treatment with common organic solvents seemed not to affect the decontamination of these surfaces. Decontamination of the other two materials was less efficient and was interfered with by the organic solvents; there was also great variability in the overall results obtained for these other two materials. In expanding our laboratory, it is possible for us to select those surface materials on which our decontamination protocol works best. © 2014 by the Society of Nuclear Medicine and Molecular Imaging, Inc.

Activity based costing of diagnostic procedures at a nuclear medicine center of a tertiary care hospital

PubMed Central

Hada, Mahesh Singh; Chakravarty, Abhijit; Mukherjee, Partha

2014-01-01

Context: Escalating health care expenses pose a new challenge to the health care environment of becoming more cost-effective. There is an urgent need for more accurate data on the costs of health care procedures. Demographic changes, changing morbidity profile, and the rising impact of noncommunicable diseases are emphasizing the role of nuclear medicine (NM) in the future health care environment. However, the impact of emerging disease load and stagnant resource availability needs to be balanced by a strategic drive towards optimal utilization of available healthcare resources. Aim: The aim was to ascertain the cost of diagnostic procedures conducted at the NM Department of a tertiary health care facility by employing activity based costing (ABC) method. Materials and Methods: A descriptive cross-sectional study was carried out over a period of 1 year. ABC methodology was utilized for ascertaining unit cost of different diagnostic procedures and such costs were compared with prevalent market rates for estimating cost effectiveness of the department being studied. Results: The cost per unit procedure for various procedures varied from Rs. 869 (USD 14.48) for a thyroid scan to Rs. 11230 (USD 187.16) for a meta-iodo-benzyl-guanidine (MIBG) scan, the most cost-effective investigations being the stress thallium, technetium-99 m myocardial perfusion imaging (MPI) and MIBG scan. The costs obtained from this study were observed to be competitive when compared to prevalent market rates. Conclusion: ABC methodology provides precise costing inputs and should be used for all future costing studies in NM Departments. PMID:25400363

Post Accident Procedures for Chemicals and Propellants.

DTIC Science & Technology

1982-09-01

METHODS AND PROCEDURES ............ 4-1 4.1 Overview of Emergency Response Procedures " and Resources Available .......................... 4-1 L1 TABLE...7-1 7.1 Criteria forTwelve Critical Operations ........................ 7-1 7.1.1 On-Scene Methods for Identifying the Ingredients...Establishing A Protocol for Selecting the Hazards Mitigation and Cleanup Methods for Single Material Spills and Multiple Materials Mixing

Project Quality Assurance Plan for research and development services provided by Oak Ridge National Laboratory in support of the Westinghouse Materials Company of Ohio Operable Unit 1 Stabilization Development and Treatability Studies Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilliam, T.M.

1991-05-01

This Project Quality Assurance Plan (PQAP) sets forth the quality assurance (QA) requirements that are applied to those elements of the Westinghouse Materials Company of Ohio (WMCO) Operable Unit 1 support at Oak Ridge National Laboratory (ORNL) project that involve research and development (R D) performed at ORNL. This is in compliance with the applicable criteria of 10 CFR Part 50, Appendix B, ANSI/ASME NQA-1, as specified by Department of Energy (DOE) Oak Ridge Operations (ORO) Order 5700.6B. For this application, NQA-1 is the core QA Program requirements document. QA policy, normally found in the requirements document, is contained herein.more » The requirements of this PQAP apply to project activities that affect the quality and reliability/credibility of research, development, and investigative data and documentation. These activities include the functions of attaining quality objectives and assuring that an appropriate QA program scope is established. The scope of activities affecting quality includes organization; personnel training and qualifications; design control; procurement; material handling and storage; operating procedures; testing, surveillance, and auditing; R D investigative activities and documentation; deficiencies; corrective actions; and QA record keeping. 12 figs.« less

46 CFR 160.133-23 - Procedure for approval of design, material, or construction change.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 6 2014-10-01 2014-10-01 false Procedure for approval of design, material, or construction change. 160.133-23 Section 160.133-23 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Release Mechanisms for Lifeboats and Rescue Boats §...

46 CFR 160.133-23 - Procedure for approval of design, material, or construction change.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 6 2013-10-01 2013-10-01 false Procedure for approval of design, material, or construction change. 160.133-23 Section 160.133-23 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Release Mechanisms for Lifeboats and Rescue Boats ...

46 CFR 160.156-23 - Procedure for approval of design, material, or construction change.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 6 2013-10-01 2013-10-01 false Procedure for approval of design, material, or construction change. 160.156-23 Section 160.156-23 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Rescue Boats and Fast Rescue Boats (SOLAS) § 160.156...

46 CFR 160.156-23 - Procedure for approval of design, material, or construction change.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 6 2014-10-01 2014-10-01 false Procedure for approval of design, material, or construction change. 160.156-23 Section 160.156-23 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Rescue Boats and Fast Rescue Boats (SOLAS) § 160.156...

21 CFR 212.60 - What requirements apply to the laboratories where I test components, in-process materials, and...

Code of Federal Regulations, 2012 CFR

2012-04-01

... I test components, in-process materials, and finished PET drug products? 212.60 Section 212.60 Food... finished PET drug products? (a) Testing procedures. Each laboratory used to conduct testing of components, in-process materials, and finished PET drug products must have and follow written procedures for the...

21 CFR 212.60 - What requirements apply to the laboratories where I test components, in-process materials, and...

Code of Federal Regulations, 2014 CFR

2014-04-01

... I test components, in-process materials, and finished PET drug products? 212.60 Section 212.60 Food... finished PET drug products? (a) Testing procedures. Each laboratory used to conduct testing of components, in-process materials, and finished PET drug products must have and follow written procedures for the...

21 CFR 212.60 - What requirements apply to the laboratories where I test components, in-process materials, and...

Code of Federal Regulations, 2013 CFR

2013-04-01

... I test components, in-process materials, and finished PET drug products? 212.60 Section 212.60 Food... finished PET drug products? (a) Testing procedures. Each laboratory used to conduct testing of components, in-process materials, and finished PET drug products must have and follow written procedures for the...

21 CFR 212.60 - What requirements apply to the laboratories where I test components, in-process materials, and...

Code of Federal Regulations, 2011 CFR

2011-04-01

... I test components, in-process materials, and finished PET drug products? 212.60 Section 212.60 Food... finished PET drug products? (a) Testing procedures. Each laboratory used to conduct testing of components, in-process materials, and finished PET drug products must have and follow written procedures for the...

Assessing Reading. Using Cloze Procedure To Assess Reading Skills. [Packet] and Handbook.

ERIC Educational Resources Information Center

Vaughan, Judy

These instructor's materials consist of a handbook directed to the teacher and 33 worksheets teachers can use with adult students in order to use the cloze procedure to assess how readily they can read materials of differing complexity. The handbook introduces the materials by considering such questions as What is meant by reading?, How could…

Procedures for EPA Libraries to Obtain Materials through Interlibrary Loan/Document Delivery

EPA Pesticide Factsheets

The purpose of this document is to establish Agency-wide procedures by which EPA libraries obtain materials for Agency employees and authorized EPA contractors through interlibrary loan (ILL) and other document delivery methods.

14 CFR 21.301 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Approval of Materials, Parts, Processes, and Appliances § 21.301 Applicability. This subpart prescribes procedural requirements for the approval of certain materials, parts...

14 CFR 21.301 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Approval of Materials, Parts, Processes, and Appliances § 21.301 Applicability. This subpart prescribes procedural requirements for the approval of certain materials, parts...

A New Material Mapping Procedure for Quantitative Computed Tomography-Based, Continuum Finite Element Analyses of the Vertebra

PubMed Central

Unnikrishnan, Ginu U.; Morgan, Elise F.

2011-01-01

Inaccuracies in the estimation of material properties and errors in the assignment of these properties into finite element models limit the reliability, accuracy, and precision of quantitative computed tomography (QCT)-based finite element analyses of the vertebra. In this work, a new mesh-independent, material mapping procedure was developed to improve the quality of predictions of vertebral mechanical behavior from QCT-based finite element models. In this procedure, an intermediate step, called the material block model, was introduced to determine the distribution of material properties based on bone mineral density, and these properties were then mapped onto the finite element mesh. A sensitivity study was first conducted on a calibration phantom to understand the influence of the size of the material blocks on the computed bone mineral density. It was observed that varying the material block size produced only marginal changes in the predictions of mineral density. Finite element (FE) analyses were then conducted on a square column-shaped region of the vertebra and also on the entire vertebra in order to study the effect of material block size on the FE-derived outcomes. The predicted values of stiffness for the column and the vertebra decreased with decreasing block size. When these results were compared to those of a mesh convergence analysis, it was found that the influence of element size on vertebral stiffness was less than that of the material block size. This mapping procedure allows the material properties in a finite element study to be determined based on the block size required for an accurate representation of the material field, while the size of the finite elements can be selected independently and based on the required numerical accuracy of the finite element solution. The mesh-independent, material mapping procedure developed in this study could be particularly helpful in improving the accuracy of finite element analyses of vertebroplasty and spine metastases, as these analyses typically require mesh refinement at the interfaces between distinct materials. Moreover, the mapping procedure is not specific to the vertebra and could thus be applied to many other anatomic sites. PMID:21823740

Review of procedures used for the extraction of anti-cancer compounds from tropical plants.

PubMed

Pandey, Saurabh; Shaw, Paul N; Hewavitharana, Amitha K

2015-01-01

Tropical plants are important sources of anti-cancer lead molecules. According to the US National Cancer Institute, out of the 3000 plants identified as active against cancer using in vitro studies, 70% are of tropical origin. The extraction of bioactive compounds from the plant materials is a fundamental step whose efficiency is critical for the success of drug discovery efforts. There has been no review published of the extraction procedures of anti-cancer compounds from tropical plants and hence the following is a critical evaluation of such procedures undertaken prior to the use of these compounds in cancer cell line studies, during the last five years. It presents a comprehensive analysis of all approaches taken to extract anti-cancer compounds from various tropical plants. (Databases searched were PubMed, SciFinder, Web of Knowledge, Scopus, Embase and Google Scholar).

Analysis of accidents with organic material in health workers.

PubMed

Vieira, Mariana; Padilha, Maria Itayra; Pinheiro, Regina Dal Castel

2011-01-01

This retrospective and descriptive study with a quantitative design aimed to evaluate occupational accidents with exposure to biological material, as well as the profile of workers, based on reporting forms sent to the Regional Reference Center of Occupational Health in Florianópolis/SC. Data collection was carried out through a survey of 118 reporting forms in 2007. Data were analyzed electronically. The occurrence of accidents was predominantly among nursing technicians, women and the mean age was 34.5 years. 73% of accidents involved percutaneous exposure, 78% had blood and fluid with blood, 44.91% resulted from invasive procedures. It was concluded that strategies to prevent the occurrence of accidents with biological material should include joint activities between workers and service management and should be directed at improving work conditions and organization.

Insight into the epitaxial encapsulation of Pd catalysts in an oriented metalloporphyrin network thin film for tandem catalysis.

PubMed

Vohra, M Ismail; Li, De-Jing; Gu, Zhi-Gang; Zhang, Jian

2017-06-14

A palladium catalyst (Pd-Cs) encapsulated metalloporphyrin network PIZA-1 thin film with bifunctional properties has been developed through a modified epitaxial layer-by-layer encapsulation approach. Combining the oxidation activity of Pd-Cs and the acetalization activity of the Lewis acidic sites in the PIZA-1 thin film, this bifunctional catalyst of the Pd-Cs@PIZA-1 thin film exhibits a good catalytic activity in a one-pot tandem oxidation-acetalization reaction. Furthermore, the surface components can be controlled by ending the top layer with different precursors in the thin film preparation procedures. The catalytic performances of these thin films with different surface composites were studied under the same conditions, which showed different reaction conversions. The result revealed that the surface component can influence the catalytic performance of the thin films. This epitaxial encapsulation offers a good understanding of the tandem catalysis for thin film materials and provides useful guidance to develop new thin film materials with catalytic properties.

Superparamagnetic nickel colloidal nanocrystal clusters with antibacterial activity and bacteria binding ability

NASA Astrophysics Data System (ADS)

Peng, Bo; Zhang, Xinglin; Aarts, Dirk G. A. L.; Dullens, Roel P. A.

2018-06-01

Recent progress in synthetic nanotechnology and the ancient use of metals in food preservation and the antibacterial treatment of wounds have prompted the development of nanometallic materials for antimicrobial applications1-4. However, the materials designed so far do not simultaneously display antimicrobial activity and the capability of binding and capturing bacteria and spores. Here, we develop a one-step pyrolysis procedure to synthesize monodisperse superparamagnetic nickel colloidal nanocrystal clusters (SNCNCs), which show both antibacterial activity and the ability to bind Gram-positive (Bacillus subtilis) and Gram-negative (Escherichia coli) bacteria, as well as bacterial spores. The SNCNCs are formed from a rapid burst of nickel nanoparticles, which self-assemble slowly into clusters. The clusters can magnetically extract 99.99% of bacteria and spores and provide a promising approach for the removal of microbes, including hard-to-treat microorganisms. We believe that our work illustrates the exciting opportunities that nanotechnology offers for alternative antimicrobial strategies and other applications in microbiology.

Antimicrobial activity of Anonna mucosa (Jacq.) grown in vivo and obtained by in vitroculture.

PubMed

Barboza, Thiago José de Souza; Ferreira, Andréa Fonseca; Ignacio, Ana Claudia de Paula Rosa; Albarello, Norma

2015-01-01

Brazilian flora includes numerous species of medicinal importance that can be used to develop new drugs. Plant tissue culture offers strategies for conservation and use of these species allowing continuous production of plants and bioactive substances. Annona mucosa has produced substances such as acetogenins and alkaloids that exhibit antimicrobial activities. The widespread use of antibiotics has led to an increase in multidrug-resistant bacteria, which represents a serious risk of infection. In view of this problem, the aim of this work was to evaluate the antibacterial potential of extracts of A. mucosa obtained by in vitro techniques and also cultured under in vivo conditions. Segments from seedlings were inoculated onto different culture media containing the auxin picloram and the cytokinin kinetin at different concentrations. The calluses obtained were used to produce cell suspension cultures. The materials were subjected to methanol extraction and subsequent fractionation in hexane and dichloromethane. The antimicrobial activity against 20 strains of clinical relevance was evaluated by the macrodilution method at minimum inhibitory and minimum bactericidal concentrations. The extracts showed selective antimicrobial activity, inhibiting the growth of Streptococcus pyogenes and Bacillus thuringiensis at different concentrations. The plant tissue culture methods produced plant materials with antibacterial properties, as well as in vivo grown plants. The antibacterial activity of material obtained through biotechnological procedures of A. mucosa is reported here for the first time.

Antimicrobial activity of Anonna mucosa (Jacq.) grown in vivo and obtained by in vitroculture

PubMed Central

de Souza Barboza, Thiago José; Ferreira, Andréa Fonseca; de Paula Rosa Ignacio, Ana Claudia; Albarello, Norma

2015-01-01

Brazilian flora includes numerous species of medicinal importance that can be used to develop new drugs. Plant tissue culture offers strategies for conservation and use of these species allowing continuous production of plants and bioactive substances. Annona mucosa has produced substances such as acetogenins and alkaloids that exhibit antimicrobial activities. The widespread use of antibiotics has led to an increase in multidrug-resistant bacteria, which represents a serious risk of infection. In view of this problem, the aim of this work was to evaluate the antibacterial potential of extracts of A. mucosa obtained by in vitro techniques and also cultured under in vivo conditions. Segments from seedlings were inoculated onto different culture media containing the auxin picloram and the cytokinin kinetin at different concentrations. The calluses obtained were used to produce cell suspension cultures. The materials were subjected to methanol extraction and subsequent fractionation in hexane and dichloromethane. The antimicrobial activity against 20 strains of clinical relevance was evaluated by the macrodilution method at minimum inhibitory and minimum bactericidal concentrations. The extracts showed selective antimicrobial activity, inhibiting the growth of Streptococcus pyogenes and Bacillus thuringiensis at different concentrations. The plant tissue culture methods produced plant materials with antibacterial properties, as well as in vivo grown plants. The antibacterial activity of material obtained through biotechnological procedures of A. mucosa is reported here for the first time. PMID:26413061

75 FR 42310 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-21

... graphic depiction on charts printed by publishers of aeronautical materials. Thus, the advantages of... the availability of this material at NARA, call 202-741- 6030, or go to: http://www.archives.gov...

76 FR 77113 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-12

... graphic depiction on charts printed by publishers of aeronautical materials. Thus, the advantages of... information on the availability of this material at NARA, call (202) 741-6030, or go to: http://www.archives...

49 CFR 236.1009 - Procedural requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... fraud; (ii) Potentially invalidated assumptions determined as a result of in-service experience or one... inspect processes, procedures, facilities, documents, records, design and testing materials, artifacts, training materials and programs, and any other information used in the design, development, manufacture...

14 CFR 13.71 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials Transportation Act... believe that a person is engaging in the transportation or shipment by air of hazardous materials in...

14 CFR 13.71 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials Transportation Act... believe that a person is engaging in the transportation or shipment by air of hazardous materials in...

14 CFR 13.71 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials Transportation Act... believe that a person is engaging in the transportation or shipment by air of hazardous materials in...

14 CFR 13.71 - Applicability.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES INVESTIGATIVE AND ENFORCEMENT PROCEDURES Orders of Compliance Under the Hazardous Materials Transportation Act... believe that a person is engaging in the transportation or shipment by air of hazardous materials in...

Trackless tack coat materials : a laboratory evaluation performance acceptance.

DOT National Transportation Integrated Search

2012-06-01

The purpose of this study was to develop, demonstrate, and document laboratory procedures that could be used by the : Virginia Department of Transportation (VDOT) to evaluate non-tracking tack coat materials. The procedures would be used to : qualify...

The Kjeldahl method as a primary reference procedure for total protein in certified reference materials used in clinical chemistry. II. Selection of direct Kjeldahl analysis and its preliminary performance parameters.

PubMed

Vinklárková, Bára; Chromý, Vratislav; Šprongl, Luděk; Bittová, Miroslava; Rikanová, Milena; Ohnútková, Ivana; Žaludová, Lenka

2015-01-01

To select a Kjeldahl procedure suitable for the determination of total protein in reference materials used in laboratory medicine, we reviewed in our previous article Kjeldahl methods adopted by clinical chemistry and found an indirect two-step analysis by total Kjeldahl nitrogen corrected for its nonprotein nitrogen and a direct analysis made on isolated protein precipitates. In this article, we compare both procedures on various reference materials. An indirect Kjeldahl method gave falsely lower results than a direct analysis. Preliminary performance parameters qualify the direct Kjeldahl analysis as a suitable primary reference procedure for the certification of total protein in reference laboratories.

Hydraulic impact end effector final test report. Automation and robotics section, ER/WM-AT Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Couture, S.

1994-02-18

One tool being developed for dislodging and fragmenting the hard salt cake waste in the single-shell nuclear waste tanks at the Hanford Reservation near Richland, Washington, is the hydraulic impact end effector (HIEE). This total operates by discharging 11-in. slugs of water at ultrahigh pressures. The HIEE was designed, built, and initially tested in 1992. Work in 1993 included advanced developments of the HIEE to further investigate its fragmentation abilities and to determine more effective operating procedures. These tests showed that more fragmentation can be achieved by increasing the charge pressure of 40 kpsi to 55 kpsi and by themore » use of different operating procedures. The size of the material and the impact energy of the water slug fired from the HIEE are believed to be major factors in material fragmentation. The material`s ability to fracture also appears to depend on the distance a fracture or crack line must travel to a free surface. Thus, larger material is more difficult to fracture than smaller material. Discharge pressures of 40 kpsi resulted in little penetration or fracturing of the material. At 55 kpsi, however, the size and depth of the fractures increased. Nozzle geometry had a significant effect on fragment size and quantity. Fragmentation was about an order of magnitude greater when the HIEE was discharged into drilled holes rather than onto the material surface. Since surface shots tend to create craters, a multi-shot procedure, coupled with an advanced nozzle design, was used to drill (crater) deep holes into large material. With this procedure, a 600-lb block was reduced to smaller pieces without the use of any additional equipment. Through this advanced development program, the HIEE has demonstrated that it can quickly fragment salt cake material into small, easily removable fragments. The HIEE`s material fragmentation ability can be substantially increased through the use of different nozzle geometries and operating procedures.« less

Materials characterization activities for %E2%80%9CTake Our Sons&Daughters to Work Day%E2%80%9D 2013.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mowry, Curtis Dale; Pimentel, Adam S.; Sparks, Elizabeth Schares

We created interactive demonstration activities for Take Our Daughters&Sons to Work Day (TODSTWD) 2013 in order to promote general interest in chemistry and also generate awareness of the type of work our laboratories can perform. %E2%80%9CCurious about Mars Rover Curiosity?%E2%80%9D performed an elemental analysis on rocks brought to our lab using the same technique utilized on the planet Mars by the NASA robotic explorer Curiosity. %E2%80%9CFood is Chemistry?%E2%80%9D utilized a mass spectrometer to measure, in seconds, each participant's breath in order to identify the food item consumed for the activity. A total of over 130 children participated in these activitiesmore » over a 3 hour block, and feedback was positive. This document reports the materials (including handouts), experimental procedures, and lessons learned so that future demonstrations can benefit from the baseline work performed. We also present example results used to prepare the Food activity and example results collected during the Curiosity demo.« less

Standardization of gamma-glutamyltransferase assays by intermethod calibration. Effect on determining common reference limits.

PubMed

Steinmetz, Josiane; Schiele, Françoise; Gueguen, René; Férard, Georges; Henny, Joseph

2007-01-01

The improvement of the consistency of gamma-glutamyltransferase (GGT) activity results among different assays after calibration with a common material was estimated. We evaluated if this harmonization could lead to reference limits common to different routine methods. Seven laboratories measured GGT activity using their own routine analytical system both according to the manufacturer's recommendation and after calibration with a multi-enzyme calibrator [value assigned by the International Federation of Clinical Chemistry and Laboratory Medicine (IFCC) reference procedure]. All samples were re-measured using the IFCC reference procedure. Two groups of subjects were selected in each laboratory: a group of healthy men aged 18-25 years without long-term medication and with alcohol consumption less than 44 g/day and a group of subjects with elevated GGT activity. The day-to-day coefficients of variation were less than 2.9% in each laboratory. The means obtained in the group of healthy subjects without common calibration (range of the means 16-23 U/L) were significantly different from those obtained by the IFCC procedure in five laboratories. After calibration, the means remained significantly different from the IFCC procedure results in only one laboratory. For three calibrated methods, the slope values of linear regression vs. the IFCC procedure were not different from the value 1. The results obtained with these three methods for healthy subjects (n=117) were gathered and reference limits were calculated. These were 11-49 U/L (2.5th-97.5th percentiles). The calibration also improved the consistency of elevated results when compared to the IFCC procedure. The common calibration improved the level of consistency between different routine methods. It permitted to define common reference limits which are quite similar to those proposed by the IFCC. This approach should lead to a real benefit in terms of prevention, screening, diagnosis, therapeutic monitoring and for epidemiological studies.

Quantitative Phase Composition of TiO 2-Coated Nanoporous-Au Monoliths by X-ray Absorption Spectroscopy and Correlations to Catalytic

DOE PAGES

Bagge-Hansen, Michael; Wichmann, Andre; Wittstock, Arne; ...

2014-02-03

Porous titania/metal composite materials have many potential applications in the fields of green catalysis, energy harvesting, and storage in which both the overall morphology of the nanoporous host material and the crystallographic phase of the titania (TiO 2) guest determine the material’s performance. New insights into the structure–function relationships of these materials were obtained by near-edge X-ray absorption fine structure (NEXAFS) spectroscopy that, for example, provides quantitative crystallographic phase composition from ultrathin, nanostructured titania films, including sensitivity to amorphous components. We demonstrate that crystallographic phase, morphology, and catalytic activity of TiO 2-functionalized nanoporous gold (np-Au) can be controlled by amore » simple annealing procedure (T < 1300 K). The material was prepared by atomic layer deposition of ~2 nm thick TiO 2 on millimeter-sized samples of np-Au (40–50 nm mean ligament size) and catalytically investigated with respect to aerobic CO oxidation. Moreover, the annealing-induced changes in catalytic activity are correlated with concurrent morphology and phase changes as provided by cross-sectional scanning electron microscopy, transmission electron microscopy, and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy.« less

Grindability determination of torrefied biomass materials using the Hybrid Work index

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Essendelft, D.T.; Zhou, X.; Kang, B.S.-J.

2012-01-01

The grindability of torrefied biomass materials is a difficult parameter to evaluate due to its inhomogeneous character and non-uniform morphology. However, it is necessary to develop a grinding test that is representative of the wide ranging character of biomass and torrefied biomass materials. Previous research has shown that Resistance to Impact Milling (RIM) can be linearly correlated to thermally driven weight loss in biomass. In particular, the RIM equipment was found to supply the right energy level to physically break down structurally deficient biomass materials while leaving the un-touched material relatively intact [1–3]. However, the RIM procedure was not designedmore » to extract the comminution energy. Alternatively, the Bond Work Index (BWI) procedure was developed to accurately assess the grinding energy of brittle materials [4,5]. However, the milling energy is too low to be effective for biomass comminution. In this research, the BWI procedure was utilized with the ball–mill approach in the RIM test to evaluate torrefied biomass materials. The hybridized procedure has been shown to be both highly correlated to energy consumption and sensitive to degree of torrefaction. The proposed Hybrid Work Index (HWI) is certainly useful for assessing torrefaction in a laboratory environment, but it may also be correlated to grinding energy at industrial scales.« less

Biodegradation of o-Benzyl-p-Chlorophenol

PubMed Central

Swisher, R. D.; Gledhill, W. E.

1973-01-01

The extent of biodegradation of o-benzyl-p-chlorophenol, marketed as a germicide under the name Santophen® 1 (Monsanto Co.), in river water, sewage, and activated sludge was determined. Biodegradation was assessed by use of a colorimetric procedure for phenolic materials, carbon analysis, and CO2 evolution. In unacclimated river water, 0.1 mg of Santophen 1 per liter was degraded within 6 days. In sewage, 0.5 and 1.0 mg/liter levels of Santophen 1 were degraded in 1 day. Acclimated activated sludge achieved 80% biodegradation of 1.0 mg/liter Santophen 1 in 8 h and 100% in 24 h. When effluent from a semicontinuous activated sludge unit, acclimated to 20 mg of Santophen 1 per liter was used as the inoculum for the CO2 evolution procedure, 60% of the total theoretical CO2 was evolved from Santophen 1. Based on the results of these studies, indicating Santophen 1 to be readily biodegraded in at least four biological systems, the continued use of present levels of Santophen 1 should present no significant environmental problems. PMID:4356462

77 FR 15576 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-16

... instead refer to their depiction on charts printed by publishers of aeronautical materials. The advantages... information on the availability of this material at NARA, call 202-741- 6030, or go to: http://www.archives...

Asphalt materials characterization in support of implementation of the proposed mechanistic-empirical pavement design guide.

DOT National Transportation Integrated Search

2007-01-01

The proposed Mechanistic-Empirical Pavement Design Guide (MEPDG) procedure is an improved methodology for pavement design and evaluation of paving materials. Since this new procedure depends heavily on the characterization of the fundamental engineer...

Operative treatment of acute acromioclavicular dislocations Rockwood III and V-Comparative study between K-wires combined with FiberTape(®) vs. TightRope System(®).

PubMed

Vrgoč, G; Japjec, M; Jurina, P; Gulan, G; Janković, S; Šebečić, B; Starešinić, M

2015-11-01

Acromioclavicular (AC) joint dislocations usually occur in a young active population as a result of a fall on the shoulder. Rockwood divided these dislocations into six types. Optimal treatment is still a matter of discussion. Many operative techniques have been developed, but the main choice is between open and minimally-invasive arthroscopic procedures. The aim of this study was to compare two different surgical methods on two groups of patients to find out which method is superior in terms of benefit to the patient. The methods were evaluated through objective and subjective scores, with a focus on complications and material costs. A retrospective two-centre study was conducted in patients with acute AC joint dislocation Rockwood types III and V. The two methods conducted were an open procedure using K-wires combined with FiberTape(®) (Arthrex, Naples, USA) (Group 1) and an arthroscopic procedure using the TightRope System(®) (Arthrex, Naples, USA) (Group 2). Groups underwent procedures during a two-year period. Diagnosis was based on the clinical and radiographic examination of both AC joints. Surgical treatment and rehabilitation were performed. Sixteen patients were included in this study: Group 1 comprised 10 patients, all male, average age 41.6 years (range 17-64 years), Rockwood type III (eight patients) and Rockwood type V (two patients); Group 2 had six patients, one female and five male, average age 37.8 years (range 18-58 years), Rockwood type III (two patients) and Rockwood type V (four patients). Time from injury to surgery was shorter and patients needed less time to return to daily activities in Group 1. Duration of the surgical procedure was shorter in Group 2 compared with Group 1. Complications of each method were noted. According to the measured scores and operative outcome between dislocation Rockwood type III and V, no significant difference was found. Implant material used in Group 2 was 4.7 times more expensive than that used in Group 1. Both methods offer many advantages with satisfying evaluated scores. K-wires with FiberTape(®) offer a shorter period for complete recovery and a significantly more cost-effective outcome, whereas the TightRope System(®) offers shorter operative procedure, better cosmetic result and avoidance of intraoperative fluoroscopy. Copyright © 2015 Elsevier Ltd. All rights reserved.

Investigation on bending failure to characterize crashworthiness of 6xxx-series aluminium sheet alloys with bending-tension test procedure

NASA Astrophysics Data System (ADS)

Henn, Philipp; Liewald, Mathias; Sindel, Manfred

2018-05-01

As lightweight design as well as crash performance are crucial to future car body design, exact material characterisation is important to use materials at their full potential and reach maximum efficiency. Within the scope of this paper, the potential of newly established bending-tension test procedure to characterise material crashworthiness is investigated. In this test setup for the determination of material failure, a buckling-bending test is coupled with a subsequent tensile test. If prior bending load is critical, tensile strength and elongation in the subsequent tensile test are dramatically reduced. The new test procedure therefore offers an applicable definition of failure as the incapacity of energy consumption in subsequent phases of the crash represents failure of a component. In addition to that, the correlation of loading condition with actual crash scenarios (buckling and free bending) is improved compared to three- point bending test. The potential of newly established bending-tension test procedure to characterise material crashworthiness is investigated in this experimental studys on two aluminium sheet alloys. Experimental results are validated with existing ductility characterisation from edge compression test.

Sepiolite nanoplatform for the simultaneous assembly of magnetite and zinc oxide nanoparticles as photocatalyst for improving removal of organic pollutants.

PubMed

Akkari, M; Aranda, P; Mayoral, A; García-Hernández, M; Ben Haj Amara, A; Ruiz-Hitzky, E

2017-10-15

Novel ternary ZnO/Fe 3 O 4 -sepiolite nanostructured materials were developed in a two-step procedure based on the incorporation of ZnO nanoparticles on a substrate composed by magnetite nanoparticles previously assembled to the sepiolite fibrous silicate (Fe 3 O 4 -sepiolite). The structural and morphological characterization shows that both, ZnO and Fe 3 O 4 nanoparticles, were homogeneously dispersed on the surface of sepiolite. Therefore, the resulting material is characterized as a multifunctional nanoplatform simultaneously providing magnetic and photoactive properties. ZnO/Fe 3 O 4 -sepiolite materials exhibit superparamagnetic properties at room temperature, which is one of the sought properties in view to facilitate their recovery from the reaction medium after application as heterogeneous catalysts. ZnO/Fe 3 O 4 -sepiolite materials were tested as photocatalysts using methylene blue dye in water as model of a pollutant molecule, showing full decolorization after 2h of UV irradiation. Moreover, the photocatalytic activity of this nanoplataform may be maintained after reuse in several consecutive cycles of treatment. Remarkably, the ZnO/magnetite-sepiolite nanostructured material displays a similar activity as ZnO/sepiolite materials, but shows the additional advantage of easier recovery by means of a magnet which facilitates its reuse. Copyright © 2017 Elsevier B.V. All rights reserved.

Russian-US collaboration on implementation of the active well coincidence counter (AWCC)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mozhajev, V.; Pshakin, G.; Stewart, J.

The feasibility of using a standard AWCC at the Obninsk IPPE has been demonstrated through active measurements of single UO{sub 2} (36% enriched) disks and through passive measurements of plutonium metal disks used for simulating reactor cores. The role of the measurements is to verify passport values assigned to the disks by the facility, and thereby facilitate the mass accountability procedures developed for the very large inventory of fuel disks at the facility. The AWCC is a very flexible instrument for verification measurements of the large variety of nuclear material items at the Obninsk IPPE and other Russian facilities. Futuremore » work at the IPPE will include calibration and verification measurements for other materials, both in individual disks and in multi-disk storage tubes; it will also include training in the use of the AWCC.« less

Applied and industrial activities at the ESRF: Present status and future development

NASA Astrophysics Data System (ADS)

Doucet, Jean

2003-01-01

Be it proteins, new superconductors, polymers or ferro-magnetic compounds, fundamental research is laying foundations for possible technical applications as well as industrial exploitation. At the ESRF, industrial companies can be involved in two main ways, depending on the type of research they are interested in. The first concerns beam time allocation for non-proprietary and fully-published research, the procedure is the same as for public laboratories. The second concerns the proprietary research, for which a fee is charged and where results are kept confidential. The use of synchrotron radiation for the characterisation of materials is certain to play a crucial role in the development of new materials in the close future. It is a policy of the ESRF that European industry should share the benefit of its facilities. A survey of the today industrial activity at the ESRF and of its perspective in near future is presented.

Fracture control procedures for aircraft structural integrity

NASA Technical Reports Server (NTRS)

Wood, H. A.

1972-01-01

The application of applied fracture mechanics in the design, analysis, and qualification of aircraft structural systems are reviewed. Recent service experiences are cited. Current trends in high-strength materials application are reviewed with particular emphasis on the manner in which fracture toughness and structural efficiency may affect the material selection process. General fracture control procedures are reviewed in depth with specific reference to the impact of inspectability, structural arrangement, and material on proposed analysis requirements for safe crack growth. The relative impact on allowable design stress is indicated by example. Design criteria, material, and analysis requirements for implementation of fracture control procedures are reviewed together with limitations in current available data techniques. A summary of items which require further study and attention is presented.

Learning clinical procedures through Internet visual resources: a qualitative study amongst undergraduate students.

PubMed

Gao, X; Wong, L M; Chow, D Y S; Law, X J; Ching, L Y L

2015-02-01

Acquiring competency in performing clinical procedures is central to professional education of healthcare providers. Internet visual resources (IVR), defined as visual materials openly accessible on public websites, provides a new channel to learn clinical procedures. This qualitative study aimed to profile the experience and opinions of undergraduate students (in dentistry, medicine and nursing) in learning clinical procedures through IVR. From clinical degree programmes (Bachelor of Dental Surgery, Bachelor of Medicine, Bachelor of Surgery, and Bachelor of Nursing) of University of Hong Kong, 31 students were recruited to join six focus group discussions, which were transcribed and subjected to thematic analysis using inductive method, in which themes emerge from data. Students actively looked for IVRs through various means and used them for pre-clinical preparation, post-clinical revision, learning simple and advanced procedures, exploring alternative and updated techniques, and benchmarking against international peers. IVRs were valued for their visual stimulation, inclusion of a wide variety of real-life cases, convenience in access, user-friendliness and time-saving features. Students tended to share and discuss IVRs with their peers rather than with tutors, even when contents deviated from school teaching or faculty's e-learning materials. When doubts persisted, they chose to follow faculty guidelines for examination purpose. Students were frustrated sometimes by difficulties in judging the scientific quality, lack of immediate interactive discussions and loosely structured presentations in some IVRs. Teachers' attitudes towards IVR appeared to vary greatly. Despite the wide spectrum of experience and opinions, IVR was generally viewed by undergraduates from across clinical faculties as enhancing their clinical confidence and self-perceived competency, enriching their learning experience and serving as an important supplement to formal learning in the planned curriculum. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Use of Ultrasound in Reconditioning by Welding of Tools Used in the Process of Regenerating Rubber

PubMed Central

Dobrotă, Dan; Petrescu, Valentin

2018-01-01

Addressing the problem of reconditioning large parts is of particular importance, due to their value and to the fact that the technologies for their reconditioning are very complex. The tools used to refine regenerated rubber which measure 660 mm in diameter and 2130 mm in length suffer from a rather fast dimensional wear. Within this research, the authors looked for a welding reconditioning procedure that would allow a very good adhesion between the deposited material layer and the base material. In this regard, the MAG (Metal Active Gas) welding process was used, but the ultrasonic activation of the welding process was also considered. Thus, the wire used for welding was activated considering a variation of the frequency of ultrasounds in the range f = 18–22 kHz respectively of the oscillation amplitude A = 30–60 μm. Under these conditions it was found that the presence of ultrasonic waves during the welding cladding process results in uniform deposition of hard carbons at the grain boundary and in the elimination of any existing oxides on the deposition surface, but at the same time increases the adhesion between the base material and the additional material, all of which positively influence the wear and corrosion resistance of the tools used to refine the regenerated rubber. PMID:29439400

On the Synergistic Catalytic Properties of Bimetallic Mesoporous Materials Containing Aluminum and Zirconium: The Prins Cyclisation of Citronellal

PubMed Central

Telalović, Selvedin; Ramanathan, Anand; Ng, Jeck Fei; Maheswari, Rajamanickam; Kwakernaak, Cees; Soulimani, Fouad; Brouwer, Hans C; Chuah, Gaik Khuan; Weckhuysen, Bert M; Hanefeld, Ulf

2011-01-01

Bimetallic three-dimensional amorphous mesoporous materials, Al-Zr-TUD-1 materials, were synthesised by using a surfactant-free, one-pot procedure employing triethanolamine (TEA) as a complexing reagent. The amount of aluminium and zirconium was varied in order to study the effect of these metals on the Brønsted and Lewis acidity, as well as on the resulting catalytic activity of the material. The materials were characterised by various techniques, including elemental analysis, X-ray diffraction, high-resolution TEM, N2 physisorption, temperature-programmed desorption (TPD) of NH3, and 27Al MAS NMR, XPS and FT-IR spectroscopy using pyridine and CO as probe molecules. Al-Zr-TUD-1 materials are mesoporous with surface areas ranging from 700–900 m2 g−1, an average pore size of around 4 nm and a pore volume of around 0.70 cm3 g−1. The synthesised Al-Zr-TUD-1 materials were tested as catalyst materials in the Lewis acid catalysed Meerwein–Ponndorf–Verley reduction of 4-tert-butylcyclohexanone, the intermolecular Prins synthesis of nopol and in the intramolecular Prins cyclisation of citronellal. Although Al-Zr-TUD-1 catalysts possess a lower amount of acid sites than their monometallic counterparts, according to TPD of NH3, these materials outperformed those of the monometallic Al-TUD-1 as well as Zr-TUD-1 in the Prins cyclisation of citronellal. This proves the existence of synergistic properties of Al-Zr-TUD-1. Due to the intramolecular nature of the Prins cyclisation of citronellal, the hydrophilic surface of the catalyst as well as the presence of both Brønsted and Lewis acid sites synergy could be obtained with bimetallic Al-Zr-TUD-1. Besides spectroscopic investigation of the active sites of the catalyst material a thorough testing of the catalyst in different types of reactions is crucial in identifying its specific active sites. PMID:21259348

Comparative Evaluation of Dimensional Accuracy of Elastomeric Impression Materials when Treated with Autoclave, Microwave, and Chemical Disinfection.

PubMed

Kamble, Suresh S; Khandeparker, Rakshit Vijay; Somasundaram, P; Raghav, Shweta; Babaji, Rashmi P; Varghese, T Joju

2015-09-01

Impression materials during impression procedure often get infected with various infectious diseases. Hence, disinfection of impression materials with various disinfectants is advised to protect the dental team. Disinfection can alter the dimensional accuracy of impression materials. The present study was aimed to evaluate the dimensional accuracy of elastomeric impression materials when treated with different disinfectants; autoclave, chemical, and microwave method. The impression materials used for the study were, dentsply aquasil (addition silicone polyvinylsiloxane syringe and putty), zetaplus (condensation silicone putty and light body), and impregum penta soft (polyether). All impressions were made according to manufacturer's instructions. Dimensional changes were measured before and after different disinfection procedures. Dentsply aquasil showed smallest dimensional change (-0.0046%) and impregum penta soft highest linear dimensional changes (-0.026%). All the tested elastomeric impression materials showed some degree of dimensional changes. The present study showed that all the disinfection procedures produce minor dimensional changes of impression material. However, it was within American Dental Association specification. Hence, steam autoclaving and microwave method can be used as an alternative method to chemical sterilization as an effective method.

Improved silicon carbide for advanced heat engines

NASA Technical Reports Server (NTRS)

Whalen, Thomas J.; Mangels, J. A.

1986-01-01

The development of silicon carbide materials of high strength was initiated and components of complex shape and high reliability were formed. The approach was to adapt a beta-SiC powder and binder system to the injection molding process and to develop procedures and process parameters capable of providing a sintered silicon carbide material with improved properties. The initial effort was to characterize the baseline precursor materials, develop mixing and injection molding procedures for fabricating test bars, and characterize the properties of the sintered materials. Parallel studies of various mixing, dewaxing, and sintering procedures were performed in order to distinguish process routes for improving material properties. A total of 276 modulus-of-rupture (MOR) bars of the baseline material was molded, and 122 bars were fully processed to a sinter density of approximately 95 percent. Fluid mixing techniques were developed which significantly reduced flaw size and improved the strength of the material. Initial MOR tests indicated that strength of the fluid-mixed material exceeds the baseline property by more than 33 percent. the baseline property by more than 33 percent.

A novel procedure for introducing large sheet-type surgical material with a self-expanding origami structure using a slim trocar (chevron pleats procedure).

PubMed

Nakase, Yuen; Nakamura, Kei; Sougawa, Akira; Nagata, Tomoyuki; Mochizuki, Satoshi; Kitai, Shouzo; Inaba, Seishirou

2017-09-01

Large sheet-type surgical materials (e.g., absorbable hemostat, adhesion barrier membranes, and flat surgical mesh) are difficult to introduce into a corporeal cavity using a 5-mm trocar; however, laparoscopic surgeries that use mainly 5-mm trocars are increasing. Furthermore, it is necessary not only to introduce but also to secure the applied surgical material and expand it from the original surgical site. To address these challenges, we developed a novel procedure for introducing such surgical materials into a corporeal cavity using a 5-mm trocar and a self-expanding origami structure, called the "chevron pleats procedure (CPP)". We used CPP in 114 cases of laparoscopic surgery for gastrointestinal diseases. The chevron folding pattern is an excellent origami structure and compactly folds a large sheet of material for use with a slim trocar. Surgical materials were folded using a chevron pleats pattern and inserted into a novel, slim, long syringe-type device, which was made from a specially ordered precision polypropylene tube, for introduction into a corporeal cavity. When the surgical material was used, the end of the device was placed above the surgical site and the inner rod was pushed. The surgical material was securely injected and expanded over the surgical site. Surgical materials were introduced smoothly and securely using a 5-mm trocar to a site of intraoperative bleeding, the incisional surface of the liver, and defects of the abdominal wall or peritoneum. Efficient hemostasis was attained, the introduction and expansion of surgical mesh was made simpler, and the covering of defects of the peritoneum with adhesion barrier membranes, which is typically difficult during laparoscopic surgery, was easily performed. CPP is a basic utility procedure for introducing several sheet-type surgical materials into a corporeal cavity with a 5-mm trocar and might help ensure efficient and safe laparoscopic surgery.

10 CFR 2.1009 - Procedures.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Applicable to Proceedings for the Issuance of Licenses for the Receipt of High-Level Radioactive Waste at a... to provide electronic files of documentary material ; (2) Establish procedures to implement the... responsibility to provide electronic files of documentary material; (4) Ensure that all documents carry the...

10 CFR 2.1009 - Procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Applicable to Proceedings for the Issuance of Licenses for the Receipt of High-Level Radioactive Waste at a... to provide electronic files of documentary material ; (2) Establish procedures to implement the... responsibility to provide electronic files of documentary material; (4) Ensure that all documents carry the...

10 CFR 2.1009 - Procedures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Applicable to Proceedings for the Issuance of Licenses for the Receipt of High-Level Radioactive Waste at a... to provide electronic files of documentary material ; (2) Establish procedures to implement the... responsibility to provide electronic files of documentary material; (4) Ensure that all documents carry the...

42 CFR 493.1256 - Standard: Control procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... for having control procedures that monitor the accuracy and precision of the complete analytic process..., include two control materials, including one that is capable of detecting errors in the extraction process... control materials having previously determined statistical parameters. (e) For reagent, media, and supply...

40 CFR 246.200-8 - Recommended procedures: Cost analysis.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) SOLID WASTES SOURCE SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures..., storage, and transportation costs have been made, and estimated tonnages of both recoverable high-grade... for revenue from paper sales and savings from diverting recycled materials from disposal. Potential...

Status of research into lightning effects on aircraft

NASA Technical Reports Server (NTRS)

Plumer, J. A.

1976-01-01

Developments in aircraft lightning protection since 1938 are reviewed. Potential lightning problems resulting from present trends toward the use of electronic controls and composite structures are discussed, along with presently available lightning test procedures for problem assessment. The validity of some procedures is being questioned because of pessimistic results and design implications. An in-flight measurement program is needed to provide statistics on lightning severity at flight altitudes and to enable more realistic tests, and operators are urged to supply researchers with more details on electronic components damaged by lightning strikes. A need for review of certain aspects of fuel system vulnerability is indicated by several recent accidents, and specific areas for examination are identified. New educational materials and standardization activities are also noted.

Closed-ecology life support systems /CELSS/ for long-duration, manned missions

NASA Technical Reports Server (NTRS)

Modell, M.; Spurlock, J. M.

1979-01-01

Studies were conducted to scope the principal areas of technology that can contribute to the development of closed-ecology life support systems (CELSS). Such systems may be required for future space activities, such as space stations, manufacturing facilities, or colonies. A major feature of CELSS is the regeneration of food from carbon in waste materials. Several processes, using biological and/or physico-chemical components, have been postulated for closing the recycle loop. At the present time, limits of available technical information preclude the specification of an optimum scheme. Nevertheless, the most significant technical requirements can be determined by way of an iterative procedure of formulating, evaluating and comparing various closed-system scenario. The functions features and applications of this systems engineering procedure are discussed.

An Automated High-Throughput System to Fractionate Plant Natural Products for Drug Discovery

PubMed Central

Tu, Ying; Jeffries, Cynthia; Ruan, Hong; Nelson, Cynthia; Smithson, David; Shelat, Anang A.; Brown, Kristin M.; Li, Xing-Cong; Hester, John P.; Smillie, Troy; Khan, Ikhlas A.; Walker, Larry; Guy, Kip; Yan, Bing

2010-01-01

The development of an automated, high-throughput fractionation procedure to prepare and analyze natural product libraries for drug discovery screening is described. Natural products obtained from plant materials worldwide were extracted and first prefractionated on polyamide solid-phase extraction cartridges to remove polyphenols, followed by high-throughput automated fractionation, drying, weighing, and reformatting for screening and storage. The analysis of fractions with UPLC coupled with MS, PDA and ELSD detectors provides information that facilitates characterization of compounds in active fractions. Screening of a portion of fractions yielded multiple assay-specific hits in several high-throughput cellular screening assays. This procedure modernizes the traditional natural product fractionation paradigm by seamlessly integrating automation, informatics, and multimodal analytical interrogation capabilities. PMID:20232897

The effect of patient age on bone formation using a fully synthetic nanocrystalline bone augmentation material in maxillary sinus grafting.

PubMed

Wolf, Michael; Wurm, Alexander; Heinemann, Friedhelm; Gerber, Thomas; Reichert, Christoph; Jäger, Andreas; Götz, Werner

2014-01-01

Maxillary sinus floor augmentation is a treatment that has been proposed for patients in whom the alveolar bone height is insufficient. This procedure is commonly used in patients aged 40 to 70 years and older. However, little information exists whether the factor of age might influence the outcome of augmentation procedures. The aim of this study was to investigate whether the patient's age has an effect on bone formation and incorporation in maxillary sinus floor augmentation procedures. A fully synthetic nanocrystalline bone augmentation material (NanoBone, Artoss) was used for sinus floor augmentation in patients with a subantral vertical bone height of at least 3 mm and maximum of 7 mm. After 7 months healing time, biopsy specimens were taken and were divided into two groups according to the patient's age. Exclusion criteria were poor general health (eg, severe renal/and or liver disease), history of a radiotherapy in the head region, chemotherapy at the time of surgical procedure, noncompensated diabetes mellitus, symptoms of a maxillary sinus disease, active periodontal or systemic diseases, smoking, and poor oral hygiene. Histologic analyses with hematoxylin-eosin stain were performed. Multinucleated osteoclast-like cells were identified by histochemical staining (tartrate-resistant acid phosphatase [TRAP]). Quantitative and age-dependent assessment of bone formation, residual bone grafting material, and soft tissue formation following sinus augmentation was performed using histomorphometric analysis and the Bonferroni adjustment of the Student t test. Twenty biopsy specimens from 17 patients were taken and divided into two groups according to age (group 1: 41 to 52 years; group 2: 66 to 71 years) containing 10 specimens each, which were analyzed in triplicate resulting in a total of 30 specimens per group. A regeneration process with varying amounts of newly formed bone surrounded by marrow-like tissue was present in all augmented regions. No signs of inflammation or immune reactions were visible. Residual particles of the augmentation material could be observed within the specimens. An age-dependent difference in investigated parameters between the two age groups could not be documented. The histologic examinations confirm that the fully synthetic nanocrystalline bone augmentation material used in this study is biocompatible and allows maxillary sinus augmentation in patients aged 41 to 70 years.

Airborne ultrasonic phased arrays using ferroelectrets: a new fabrication approach.

PubMed

Ealo, Joao L; Camacho, Jorge J; Fritsch, Carlos

2009-04-01

In this work, a novel procedure that considerably simplifies the fabrication process of ferroelectret-based multielement array transducers is proposed and evaluated. Also, the potential of ferroelectrets being used as active material for air-coupled ultrasonic transducer design is demonstrated. The new construction method of multi-element transducers introduces 2 distinctive improvements. First, active ferroelectret material is not discretized into elements, and second, the need of structuring upper and/or lower electrodes in advance of the permanent polarization of the film is removed. The aperture discretization and the mechanical connection are achieved in one step using a through-thickness conductive tape. To validate the procedure, 2 linear array prototypes of 32 elements, with a pitch of 3.43 mm and a wide usable frequency range from 30 to 300 kHz, were built and evaluated using a commercial phased-array system. A low crosstalk among elements, below -30 dB, was measured by interferometry. Likewise, a homogeneous response of the array elements, with a maximum deviation of +/-1.8 dB, was obtained. Acoustic beam steering measurements were accomplished at different deflection angles using a calibrated microphone. The ultrasonic beam parameters, namely, lateral resolution, side lobe level, grating lobes, and focus depth, were congruent with theory. Acoustic images of a single reflector were obtained using one of the array elements as the receiver. Resulting images are also in accordance with numerical simulation, demonstrating the feasibility of using these arrays in pulse-echo mode. The proposed procedure simplifies the manufacturing of multidimensional arrays with arbitrary shape elements and not uniformly distributed. Furthermore, this concept can be extended to nonflat arrays as long as the transducer substrate conforms to a developable surface.

Thermal protection system repair kit program

NASA Technical Reports Server (NTRS)

1979-01-01

The feasibility and conceptual design aspects of repair materials and procedures for in orbit repair of the space shuttle orbiter TPS tiles are investigated. Material studies to investigate cure in place materials are described including catalyst and cure studies, ablation tests and evaluations, and support mixing and applicator design. The feasibility of the repair procedures, the storage of the TPS, dispensing, and cure problems are addressed.

In Vitro Assessment of Nanoparticle Effects on Blood Coagulation.

PubMed

Potter, Timothy M; Rodriguez, Jamie C; Neun, Barry W; Ilinskaya, Anna N; Cedrone, Edward; Dobrovolskaia, Marina A

2018-01-01

Blood clotting is a complex process which involves both cellular and biochemical components. The key cellular players in the blood clotting process are thrombocytes or platelets. Other cells, including leukocytes and endothelial cells, contribute to clotting by expressing the so-called pro-coagulant activity (PCA) complex on their surface. The biochemical component of blood clotting is represented by the plasma coagulation cascade, which includes plasma proteins also known as coagulation factors. The coordinated interaction between platelets, leukocytes, endothelial cells, and plasma coagulation factors is necessary for maintaining hemostasis and for preventing excessive bleeding. Undesirable activation of all or some of these components may lead to pathological blood coagulation and life-threatening conditions such as consumptive coagulopathy or disseminated intravascular coagulation (DIC). In contrast, unintended inhibition of the coagulation pathways may lead to hemorrhage. Thrombogenicity is the property of a test material to induce blood coagulation by affecting one or more elements of the clotting process. Anticoagulant activity refers to the property of a test material to inhibit coagulation. The tendency to cause platelet aggregation, perturb plasma coagulation, and induce leukocyte PCA can serve as an in vitro measure of a nanomaterial's likelihood to be pro- or anticoagulant in vivo. This chapter describes three procedures for in vitro analyses of platelet aggregation, plasma coagulation time, and activation of leukocyte PCA. Platelet aggregation and plasma coagulation procedures have been described earlier. The revision here includes updated details about nanoparticle sample preparation, selection of nanoparticle concentration for the in vitro study, and updated details about assay controls. The chapter is expanded to describe a method for the leukocyte PCA analysis and case studies demonstrating the performance of these in vitro assays.

Surge current and electron swarm tunnel tests of thermal blanket and ground strap materials

NASA Technical Reports Server (NTRS)

Hoffmaster, D. K.; Inouye, G. T.; Sellen, J. M., Jr.

1977-01-01

The results are described of a series of current conduction tests with a thermal control blanket to which grounding straps have been attached. The material and the ground strap attachment procedure are described. The current conduction tests consisted of a surge current examination of the ground strap and a dilute flow, energetic electron deposition and transport through the bulk of the insulating film of this thermal blanket material. Both of these test procedures were used previously with thermal control blanket materials.

Analytical Bias Exceeding Desirable Quality Goal in 4 out of 5 Common Immunoassays: Results of a Native Single Serum Sample External Quality Assessment Program for Cobalamin, Folate, Ferritin, Thyroid-Stimulating Hormone, and Free T4 Analyses.

PubMed

Kristensen, Gunn B B; Rustad, Pål; Berg, Jens P; Aakre, Kristin M

2016-09-01

We undertook this study to evaluate method differences for 5 components analyzed by immunoassays, to explore whether the use of method-dependent reference intervals may compensate for method differences, and to investigate commutability of external quality assessment (EQA) materials. Twenty fresh native single serum samples, a fresh native serum pool, Nordic Federation of Clinical Chemistry Reference Serum X (serum X) (serum pool), and 2 EQA materials were sent to 38 laboratories for measurement of cobalamin, folate, ferritin, free T4, and thyroid-stimulating hormone (TSH) by 5 different measurement procedures [Roche Cobas (n = 15), Roche Modular (n = 4), Abbott Architect (n = 8), Beckman Coulter Unicel (n = 2), and Siemens ADVIA Centaur (n = 9)]. The target value for each component was calculated based on the mean of method means or measured by a reference measurement procedure (free T4). Quality specifications were based on biological variation. Local reference intervals were reported from all laboratories. Method differences that exceeded acceptable bias were found for all components except folate. Free T4 differences from the uncommonly used reference measurement procedure were large. Reference intervals differed between measurement procedures but also within 1 measurement procedure. The serum X material was commutable for all components and measurement procedures, whereas the EQA materials were noncommutable in 13 of 50 occasions (5 components, 5 methods, 2 EQA materials). The bias between the measurement procedures was unacceptably large in 4/5 tested components. Traceability to reference materials as claimed by the manufacturers did not lead to acceptable harmonization. Adjustment of reference intervals in accordance with method differences and use of commutable EQA samples are not implemented commonly. © 2016 American Association for Clinical Chemistry.

A deflectable guiding catheter for real-time MRI-guided interventions

PubMed Central

Bell, Jamie A.; Saikus, Christina E.; Ratnakaya, Kanishka; Wu, Vincent; Sonmez, Merdim; Faranesh, Anthony Z.; Colyer, Jessica H.; Lederman, Robert J.; Kocaturk, Ozgur

2011-01-01

Purpose To design a deflectable guiding catheter that omits long metallic components yet preserves mechanical properties to facilitate therapeutic interventional MRI procedures. Materials and Methods The catheter shaft incorporated Kevlar braiding. 180° deflection was attained with a 5 cm nitinol slotted tube, a nitinol spring, and a Kevlar pull string. We tested three designs: passive, passive incorporating an inductively-coupled coil, and active receiver. We characterized mechanical properties, MRI properties, RF induced heating, and in vivo performance in swine. Results Torque and tip deflection force were satisfactory. Representative procedures included hepatic and azygos vein access, laser cardiac septostomy, and atrial septal defect crossing. Visualization was best in the active configuration, delineating profile and tip orientation. The passive configuration could be used in tandem with an active guidewire to overcome its limited conspicuity. There was no RF-induced heating in all configurations under expected use conditions in vitro and in vivo. Conclusion Kevlar and short nitinol component substitutions preserved mechanical properties. The active design offered the best visibility and usability but reintroduced metal conductors. We describe versatile deflectable guiding catheters with a 0.057” lumen for interventional MRI catheterization. Implementations are feasible using active, inductive, and passive visualization strategies to suit application requirements. PMID:22128071

A transition from using multi-step procedures to a fully integrated system for performing extracorporeal photopheresis: A comparison of costs and efficiencies.

PubMed

Azar, Nabih; Leblond, Veronique; Ouzegdouh, Maya; Button, Paul

2017-12-01

The Pitié Salpêtrière Hospital Hemobiotherapy Department, Paris, France, has been providing extracorporeal photopheresis (ECP) since November 2011, and started using the Therakos ® CELLEX ® fully integrated system in 2012. This report summarizes our single-center experience of transitioning from the use of multi-step ECP procedures to the fully integrated ECP system, considering the capacity and cost implications. The total number of ECP procedures performed 2011-2015 was derived from department records. The time taken to complete a single ECP treatment using a multi-step technique and the fully integrated system at our department was assessed. Resource costs (2014€) were obtained for materials and calculated for personnel time required. Time-driven activity-based costing methods were applied to provide a cost comparison. The number of ECP treatments per year increased from 225 (2012) to 727 (2015). The single multi-step procedure took 270 min compared to 120 min for the fully integrated system. The total calculated per-session cost of performing ECP using the multi-step procedure was greater than with the CELLEX ® system (€1,429.37 and €1,264.70 per treatment, respectively). For hospitals considering a transition from multi-step procedures to fully integrated methods for ECP where cost may be a barrier, time-driven activity-based costing should be utilized to gain a more comprehensive understanding the full benefit that such a transition offers. The example from our department confirmed that there were not just cost and time savings, but that the time efficiencies gained with CELLEX ® allow for more patient treatments per year. © 2017 The Authors Journal of Clinical Apheresis Published by Wiley Periodicals, Inc.

Light curing in dentistry and clinical implications: a literature review.

PubMed

Rueggeberg, Frederick Allen; Giannini, Marcelo; Arrais, Cesar Augusto Galvão; Price, Richard Bengt Thomas

2017-08-28

Contemporary dentistry literally cannot be performed without use of resin-based restorative materials. With the success of bonding resin materials to tooth structures, an even wider scope of clinical applications has arisen for these lines of products. Understanding of the basic events occurring in any dental polymerization mechanism, regardless of the mode of activating the process, will allow clinicians to both better appreciate the tremendous improvements that have been made over the years, and will also provide valuable information on differences among strategies manufacturers use to optimize product performance, as well as factors under the control of the clinician, whereby they can influence the long-term outcome of their restorative procedures.

14 CFR 21.303 - Replacement and modification parts.

Code of Federal Regulations, 2010 CFR

2010-01-01

... determination can be made. Statistical quality control procedures may be employed where it is shown that a... AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Approval of Materials, Parts, Processes, and... the configuration of the part; and (ii) Information on dimensions, materials, and processes necessary...

Adaptation of instructional materials: a commentary on the research on adaptations of Who Polluted the Potomac

NASA Astrophysics Data System (ADS)

Ercikan, Kadriye; Alper, Naim

2009-03-01

This commentary first summarizes and discusses the analysis of the two translation processes described in the Oliveira, Colak, and Akerson article and the inferences these researchers make based on their research. In the second part of the commentary, we describe procedures and criteria used in adapting tests into different languages and how they may apply to adaptation of instructional materials. The authors provide a good theoretical analysis of what took place in two translation instances and make an important contribution by taking the first step in providing a systematic discussion of adaptation of instructional materials. Our discussion proposes procedures for adapting instructional materials for examining equivalence of source and target versions of adapted instructional materials. We highlight that many of the procedures and criteria used in examining comparability of educational tests is missing in this emerging research of area.

Comparative Evaluation of Dimensional Accuracy of Elastomeric Impression Materials when Treated with Autoclave, Microwave, and Chemical Disinfection

PubMed Central

Kamble, Suresh S; Khandeparker, Rakshit Vijay; Somasundaram, P; Raghav, Shweta; Babaji, Rashmi P; Varghese, T Joju

2015-01-01

Background: Impression materials during impression procedure often get infected with various infectious diseases. Hence, disinfection of impression materials with various disinfectants is advised to protect the dental team. Disinfection can alter the dimensional accuracy of impression materials. The present study was aimed to evaluate the dimensional accuracy of elastomeric impression materials when treated with different disinfectants; autoclave, chemical, and microwave method. Materials and Methods: The impression materials used for the study were, dentsply aquasil (addition silicone polyvinylsiloxane syringe and putty), zetaplus (condensation silicone putty and light body), and impregum penta soft (polyether). All impressions were made according to manufacturer’s instructions. Dimensional changes were measured before and after different disinfection procedures. Result: Dentsply aquasil showed smallest dimensional change (−0.0046%) and impregum penta soft highest linear dimensional changes (−0.026%). All the tested elastomeric impression materials showed some degree of dimensional changes. Conclusion: The present study showed that all the disinfection procedures produce minor dimensional changes of impression material. However, it was within American Dental Association specification. Hence, steam autoclaving and microwave method can be used as an alternative method to chemical sterilization as an effective method. PMID:26435611

Chemical Retraction Agents - in vivo and in vitro Studies into their Physico-Chemical Properties, Biocompatibility with Gingival Margin Tissues and Compatibility with Elastomer Impression Materials.

PubMed

Nowakowska, Danuta; Saczko, Jolanta; Kulbacka, Julita; Wicckiewicz, Wlodzimierz

2017-01-01

Gingival margin retraction/displacement (GMR/D) is a commonly accepted procedure in restorative dentistry. Of the various retraction methods, the chemo-mechanical approach with retraction media and chemical retraction agents (ChRAs) is mostly used. Different local and/or systemic side effects were observed after "chemical attacks" from these retraction agents. Moreover, no consensus exists as to the compatibility of chemical agents with different impression materials. This paper reports the findings of in vivo and in vitro studies and we discuss the physico-chemical properties of chemical retraction agents, their undesirable clinical side effects, biological activity and compatibility with selected groups of elastomer impression materials. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Extended Development Procedure EDeP Advanced Reference Manual.

DTIC Science & Technology

1982-11-01

approach or combination of approaches. * The necessary mtials might include job aides on peer tutoring procedures, flashcards , lesson materials, etc. * The...should be suitable for one-to-one use. * A special form of a particular medium may be necessary, such as flashcards instead of printed text materials...to read, or holding a flashcard with a math problem on it indicates that the learner should solve the problem. Coaching: - A procedure can be devised

Multidisciplinary tailoring of hot composite structures

NASA Technical Reports Server (NTRS)

Singhal, Surendra N.; Chamis, Christos C.

1993-01-01

A computational simulation procedure is described for multidisciplinary analysis and tailoring of layered multi-material hot composite engine structural components subjected to simultaneous multiple discipline-specific thermal, structural, vibration, and acoustic loads. The effect of aggressive environments is also simulated. The simulation is based on a three-dimensional finite element analysis technique in conjunction with structural mechanics codes, thermal/acoustic analysis methods, and tailoring procedures. The integrated multidisciplinary simulation procedure is general-purpose including the coupled effects of nonlinearities in structure geometry, material, loading, and environmental complexities. The composite material behavior is assessed at all composite scales, i.e., laminate/ply/constituents (fiber/matrix), via a nonlinear material characterization hygro-thermo-mechanical model. Sample tailoring cases exhibiting nonlinear material/loading/environmental behavior of aircraft engine fan blades, are presented. The various multidisciplinary loads lead to different tailored designs, even those competing with each other, as in the case of minimum material cost versus minimum structure weight and in the case of minimum vibration frequency versus minimum acoustic noise.

Evaluation of Natural Products for Algicidal Properties

PubMed Central

Safferman, Robert S.; Morris, Mary-Ellen

1962-01-01

A procedure for the screening of antialgal substances has been described and evaluated with specific reference to microbial products. Data on the extracellular materials of 545 actinomycete and fungal isolates showed a wide distribution of agents having algicidal activities. Of these culture filtrates, 20.4% apparently had selective antagonistic effects against particular algal groups. A more comprehensive examination revealed that metabolic products from two actinomycete cultures exhibited properties that warrant further studies on their chemical and physiological characteristics. PMID:14495975

Carbonized waste for the cut-down of environmental pollution with heavy metals

NASA Astrophysics Data System (ADS)

Gmucová, K.; Morvová, M.; Havránek, E.; Kliman, J.; Košinár, I.; Kunecová, D.; Malakhov, A. I.; Anisimov, Yu. S.; Morva, I.; Siváček, I.; Sýkorová, M.; Šatka, A.

2011-07-01

Nowadays, an increasing concern about the treatment and disposal of waters contaminated by toxic heavy metals is noticed. The toxic pollutants must be removed from the sewage water which then is fed back into the materials cycle. Any candidate technology should result in reusable by-products. With this in mind, the aim of the present study is to test a low cost procedure for utilization of the carbonized waste, a product of PET (polyethylene terephthalate) bottles pyrolysis on sand bedding, for this purpose. Both the water present in PET bottles waste and combustion exhaust probably contribute to the conversion of carbon char to activated carbon directly within the pyrolysis oven. Preliminary results, obtained for several heavy metal ions under laboratory conditions are presented and discussed. Adsorption of heavy metals on the carbonized PET waste is tested by both the electrochemical methods and X-ray fluorescence spectrometry. A simple desorption procedure for the regeneration of prepared active carbon is proposed.

Correlation Between Findings of Multislice Helical Computed Tomography (CT), Endoscopic Examinations, Endovascular Procedures, and Surgery in Patients with Symptoms of Acute Gastrointestinal Bleeding

PubMed Central

Konecki, Dariusz; Pacho, Ryszard; Rowiński, Olgierd

2017-01-01

Summary Background Endoscopic methods (gastroscopy and colonoscopy) are considered fundamental for the diagnosis of gastrointestinal bleeding. In recent years, multidetector computed tomography (MDCT) has also gained importance in diagnosing gastrointestinal bleeding, particularly in hemodynamically unstable patients and in cases with suspected lower gastrointestinal tract bleeding. CT can detect both the source and the cause of active gastrointestinal bleeding, thereby expediting treatment initiation. Material/Methods The study group consisted of 16 patients with clinical symptoms of gastrointestinal bleeding in whom features of active bleeding were observed on CT. In all patients, bleeding was verified by means of other methods such as endoscopic examinations, endovascular procedures, or surgery. Results The bleeding source was identified on CT in all 16 patients. In 14 cases (87.5%), bleeding was confirmed by other methods. Conclusions CT is an efficient, fast, and readily available tool for detecting the location of acute gastrointestinal bleeding. PMID:29662594

Modeling Fan Effects on the Time Course of Associative Recognition

PubMed Central

Schneider, Darryl W.; Anderson, John R.

2011-01-01

We investigated the time course of associative recognition using the response signal procedure, whereby a stimulus is presented and followed after a variable lag by a signal indicating that an immediate response is required. More specifically, we examined the effects of associative fan (the number of associations that an item has with other items in memory) on speed–accuracy tradeoff functions obtained in a previous response signal experiment involving briefly studied materials and in a new experiment involving well-learned materials. High fan lowered asymptotic accuracy or the rate of rise in accuracy across lags, or both. We developed an Adaptive Control of Thought–Rational (ACT-R) model for the response signal procedure to explain these effects. The model assumes that high fan results in weak associative activation that slows memory retrieval, thereby decreasing the probability that retrieval finishes in time and producing a speed–accuracy tradeoff function. The ACT-R model provided an excellent account of the data, yielding quantitative fits that were as good as those of the best descriptive model for response signal data. PMID:22197797

Equation-of-State Scaling Factors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scannapieco, Anthony J.

2016-06-28

Equation-of-State scaling factors are needed when using a tabular EOS in which the user de ned material isotopic fractions di er from the actual isotopic fractions used by the table. Additionally, if a material is dynamically changing its isotopic structure, then an EOS scaling will again be needed, and will vary in time and location. The procedure that allows use of a table to obtain information about a similar material with average atomic mass Ms and average atomic number Zs is described below. The procedure is exact for a fully ionized ideal gas. However, if the atomic number is replacemore » by the e ective ionization state the procedure can be applied to partially ionized material as well, which extends the applicability of the scaling approximation continuously from low to high temperatures.« less

Three-dimensional hierarchical and interconnected honeycomb-like porous carbon derived from pomelo peel for high performance supercapacitors

NASA Astrophysics Data System (ADS)

Liu, Jingyuan; Li, Hongpeng; Zhang, Hongsen; Liu, Qi; Li, Rumin; Li, Bin; Wang, Jun

2018-01-01

The urgent need for sustainable development of human society has forced material scientists to explore novel materials starting from cheap natural precursors for next-generation energy storage devices by using environmentally friendly strategies. In this work, heteroatom-functionalized porous carbonaceous materials with 3D hierarchical and interconnected honeycomb-like structure have been successfully synthesized by using waste biomass pomelo peel as raw material through the combination of hydrothermal carbonization and followed KOH activation procedure. Benefiting from the unique honeycomb-like structure and high specific surface area, the as-obtained carbon material exhibits satisfactory capacitive behavior: 374 F/g at 0.1 A/g; excellent cycling stability of 92.5% capacitance retention over continuous 5000 cycles. More importantly, the as-assembled symmetric supercapacitors based on as-prepared electrode material can deliver high gravimetric and volumetric energy density of 20 W h/kg and 18.7 W h/L in 6 M KOH, respectively, as well as outstanding cycling stability. The obtained results demonstrate the possibility for taking full advantage of sustainable and large scale advanced carbon materials by choosing waste biomass, particularly the pomelo peel as a raw material.

46 CFR 164.015-5 - Procedure for acceptance.

Code of Federal Regulations, 2010 CFR

2010-10-01

...: SPECIFICATIONS AND APPROVAL MATERIALS Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shape § 164.015-5 Procedure for acceptance. (a) Unicellular plastic foam is not subject to formal approval, but will be... manufacturing methods and to select from foam already manufactured sufficient sample material for testing for...

14 CFR 302.705 - Further procedures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) PROCEDURAL... designated time, or if a timely filed answer raises no material issue of fact, the DOT decisionmaker may... answer raising a material issue of fact is filed within the time designated in the Department's order...

14 CFR 302.705 - Further procedures.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) PROCEDURAL... designated time, or if a timely filed answer raises no material issue of fact, the DOT decisionmaker may... answer raising a material issue of fact is filed within the time designated in the Department's order...

14 CFR 302.705 - Further procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) PROCEDURAL... designated time, or if a timely filed answer raises no material issue of fact, the DOT decisionmaker may... answer raising a material issue of fact is filed within the time designated in the Department's order...

23 CFR 710.201 - State responsibilities.

Code of Federal Regulations, 2011 CFR

2011-04-01

... periodically to reflect changes in operations and submit the updated materials for approval by the FHWA. (d..., and procedures. The manual shall describe functions and procedures for all phases of the real estate... all such requirements and for imposing sanctions in cases of material non-compliance. (i) Approval...

10 CFR 73.46 - Fixed site physical protection systems, subsystems, components, and procedures.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., components, and procedures. 73.46 Section 73.46 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL... Energy couriers engaged in the transport of special nuclear material. The search function for detection... of Energy vehicles engaged in transporting special nuclear material and emergency vehicles under...

10 CFR 73.46 - Fixed site physical protection systems, subsystems, components, and procedures.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., components, and procedures. 73.46 Section 73.46 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) PHYSICAL... Energy couriers engaged in the transport of special nuclear material. The search function for detection... of Energy vehicles engaged in transporting special nuclear material and emergency vehicles under...

14 CFR 302.705 - Further procedures.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) PROCEDURAL... designated time, or if a timely filed answer raises no material issue of fact, the DOT decisionmaker may... answer raising a material issue of fact is filed within the time designated in the Department's order...

14 CFR 302.705 - Further procedures.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) PROCEDURAL... designated time, or if a timely filed answer raises no material issue of fact, the DOT decisionmaker may... answer raising a material issue of fact is filed within the time designated in the Department's order...

Health and safety plan for the Environmental Restoration Program at Oak Ridge National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clark, C. Jr.; Burman, S.N.; Cipriano, D.J. Jr.

1994-08-01

This Programmatic Health and Safety plan (PHASP) is prepared for the U.S. Department of Energy (DOE) Oak Ridge National Laboratory (ORNL) Environmental Restoration (ER) Program. This plan follows the format recommended by the U.S. Environmental Protection Agency (EPA) for remedial investigations and feasibility studies and that recommended by the EM40 Health and Safety Plan (HASP) Guidelines (DOE February 1994). This plan complies with the Occupational Safety and Health Administration (OSHA) requirements found in 29 CFR 1910.120 and EM-40 guidelines for any activities dealing with hazardous waste operations and emergency response efforts and with OSHA requirements found in 29 CFR 1926.65.more » The policies and procedures in this plan apply to all Environmental Restoration sites and activities including employees of Energy Systems, subcontractors, and prime contractors performing work for the DOE ORNL ER Program. The provisions of this plan are to be carried out whenever activities are initiated that could be a threat to human health or the environment. This plan implements a policy and establishes criteria for the development of procedures for day-to-day operations to prevent or minimize any adverse impact to the environment and personnel safety and health and to meet standards that define acceptable management of hazardous and radioactive materials and wastes. The plan is written to utilize past experience and best management practices to minimize hazards to human health and safety and to the environment from event such as fires, explosions, falls, mechanical hazards, or any unplanned release of hazardous or radioactive materials to air, soil, or surface water.« less

The use of by-products from metallurgical and mineral industries as filler in cement-based materials.

PubMed

Moosberg, Helena; Lagerblad, Björn; Forssberg, Eric

2003-02-01

This investigation has been made in order to make it possible to increase the use of by-products in cement-based materials. Use of by-products requires a screening procedure that will reliably determine their impact on concrete. A test procedure was developed. The most important properties were considered to be strength development, shrinkage, expansion and workability. The methods used were calorimetry, flow table tests, F-shape measurements, measurements of compressive and flexural strength and shrinkage/expansion measurements. Scanning electron microscopy was used to verify some results. Twelve by-products were collected from Swedish metallurgical and mineral industries and classified according to the test procedure. The investigation showed that the test procedure clearly screened out the materials that can be used in the production of concrete from the unsuitable ones.

Oxygen electrodes for rechargeable alkaline fuel cells

NASA Technical Reports Server (NTRS)

Swette, L.; Kackley, N.

1989-01-01

Electrocatalysts and supports for the positive electrode of moderate temperature single-unit rechargeable alkaline fuel cells are being investigated and developed. Candidate support materials were drawn from transition metal carbides, borides, nitrides and oxides which have high conductivity (greater than 1 ohm/cm). Candidate catalyst materials were selected largely from metal oxides of the form ABO sub x (where A = Pb, Cd, Mn, Ti, Zr, La, Sr, Na, and B = Pt, Pd, Ir, Ru, Ni (Co) which were investigated and/or developed for one function only, O2 reduction or O2 evolution. The electrical conductivity requirement for catalysts may be lower, especially if integrated with a higher conductivity support. All candidate materials of acceptable conductivity are subjected to corrosion testing. Materials that survive chemical testing are examined for electrochemical corrosion activity. For more stringent corrosion testing, and for further evaluation of electrocatalysts (which generally show significant O2 evolution at at 1.4 V), samples are held at 1.6 V or 0.6 V for about 100 hours. The surviving materials are then physically and chemically analyzed for signs of degradation. To evaluate the bifunctional oxygen activity of candidate catalysts, Teflon-bonded electrodes are fabricated and tested in a floating electrode configuration. Many of the experimental materials being studied have required development of a customized electrode fabrication procedure. In advanced development, the goal is to reduce the polarization to about 300 to 350 mV. Approximately six support materials and five catalyst materials were identified to date for further development. The test results will be described.

Emission of biocides from treated materials: test procedures for water and air.

PubMed

Schoknecht, Ute; Wegner, Robby; Horn, Wolfgang; Jann, Oliver

2003-01-01

Methods for the determination of biocide emissions from treated materials into water and air were developed and tested in order to support a comparative ecological assessment of biocidal products. Leaching tests, experiments with simulated rain, extraction cleaning of carpets and emission chamber tests were performed with a series of treated materials. The experiments focused on the effect of changes in the procedure as well as characteristics of the specimens and demonstrate the suitability of the proposed methods for biocides of different product types. It was demonstrated that emissions of biocides into water can be compared on the basis of leaching tests in which the emission kinetics of the active ingredients are recorded. However, the water volume per surface area and the timetable for water changes have to be defined in such tests. Functions of flux rates related to time can be well described for inorganic compounds, whereas modelling of the data is more complicated for organic substances. Emission chamber tests using 20-litre and 23-litre glass exsiccators, originally developed to study volatile organic compounds, were successfully adapted for the investigation of the emission of biocides from treated materials which are usually semi volatile organic compounds. However test parameters and the method of analysis have to be adapted to the substances to be determined. Generally, it was found that the emission curves for the semi volatile organic compounds investigated differ from those of volatile organic compounds.

Nitrogen and Fluorine-Codoped Carbon Nanowire Aerogels as Metal-Free Electrocatalysts for Oxygen Reduction Reaction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fu, Shaofang; Zhu, Chengzhou; Song, Junhua

2017-07-11

The development of active, durable, and low-cost catalysts to replace noble metal-based materials is highly desirable to promote the sluggish oxygen reduction reaction in fuel cells. Herein, nitrogen and fluorine-codoped three-dimensional carbon nanowire aerogels, composed of interconnected carbon nanowires, were synthesized for the first time by a hydrothermal carbonization process. Owing to their porous nanostructures and heteroatom-doping, the as-prepared carbon nanowire aerogels, with optimized composition, present excellent electrocatalytic activity that is comparable to commercial Pt/C. Remarkably, the aerogels also exhibit superior stability and methanol tolerance. This synthesis procedure paves a new way to design novel heteroatomdoped catalysts.

Promoting Spontaneous Second Harmonic Generation through Organogelation.

PubMed

Marco, A Belén; Aparicio, Fátima; Faour, Lara; Iliopoulos, Konstantinos; Morille, Yohann; Allain, Magali; Franco, Santiago; Andreu, Raquel; Sahraoui, Bouchta; Gindre, Denis; Canevet, David; Sallé, Marc

2016-07-27

An organogelator based on the Disperse Red nonlinear optical chromophore was synthesized according to a simple and efficient three-step procedure. The supramolecular gel organization leads to xerogels which display a spontaneous second harmonic generation (SHG) response without any need for preprocessing, and this SHG activity appears to be stable over several months. These findings, based on an intrinsic structural approach, are supported by favorable intermolecular supramolecular interactions, which promote a locally non-centrosymmetric NLO-active organization. This is in sharp contrast with most materials designed for SHG purposes, which generally require the use of expensive or heavy-to-handle external techniques for managing the dipoles' alignment.

A PROCEDURE FOR ESTABLISHING TRACEABILITY OF GAS MIXTURES TO CERTAIN NATIONAL BUREAU OF STANDARDS STANDARD REFERENCE MATERIALS

EPA Science Inventory

This procedure includes the specifications and requirements that must be followed by gas manufacturers during the preparation of compressed cylinder gas Certified Reference Materials (CRM). A CRM is a certified gas standard prepared at a concentration that does not exceed + or - ...

Evaluation of antimicrobial properties of cork.

PubMed

Gonçalves, Filipa; Correia, Patrícia; Silva, Susana P; Almeida-Aguiar, Cristina

2016-02-01

Cork presents a range of diverse and versatile properties making this material suitable for several and extremely diverse industrial applications. Despite the wide uses of cork, its antimicrobial properties and potential applications have deserved little attention from industry and the scientific community. Thus, the main purpose of this work was the evaluation of the antibacterial properties of cork, by comparison with commercially available antimicrobial materials (Ethylene-Vinyl Acetate copolymer and a currently used antimicrobial commercial additive (ACA)), following the previous development and optimization of a method for such antimicrobial assay. The AATCC 100-2004 standard method, a quantitative procedure developed for the assessment of antimicrobial properties in textile materials, was used as reference and optimized to assess cork antibacterial activity. Cork displayed high antibacterial activity against Staphylococcus aureus, with a bacterial reduction of almost 100% (96.93%) after 90 minutes of incubation, similar to the one obtained with ACA. A more reduced but time-constant antibacterial action was observed against Escherichia coli (36% reduction of the initial number of bacterial colonies). To complement this study, antibacterial activity was further evaluated for a water extract of cork and an MIC of 6 mg mL(-1) was obtained against the reference strain S. aureus. © FEMS 2015. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Characterization of the extracellular bactericidal factors of rat alveolar lining material.

PubMed Central

Coonrod, J D; Lester, R L; Hsu, L C

1984-01-01

The surfactant fraction (55,000-g pellet) of leukocyte-free rat bronchoalveolar lavage fluid contains factors that rapidly kill and lyse pneumococci. These factors were purified and identified biochemically by using a quantitative bactericidal test to monitor fractionation procedures. 91% of the antipneumococcal activity of rat surfactant was recovered in chloroform after extraction of rat surfactant with chloroform-methanol (Bligh-Dyer procedure). After chromatography on silicic acid with chloroform, acetone, and methanol, all detectable antibacterial activity (approximately 80% of the initial activity) eluted with the neutral lipids in chloroform. When rechromatographed on silicic acid with hexane, hexane-chloroform, and chloroform, the antibacterial activity eluted with FFA. Thin-layer chromatography (TLC) established that the antibacterial activity was confined to the FFA fraction. Gas-liquid chromatography showed that the fatty acid fraction contained a mixture of long-chain FFA (C12 to C22) of which 66.7% were saturated and 32.4% were unsaturated. The quantity of TLC-purified FFA needed to kill 50% of 10(8) pneumococci under standardized conditions (one bactericidal unit) was 10.6 +/- 0.5 micrograms. Purified FFA acted as detergents, causing release of [3H]choline from pneumococcal cell walls and increased bacterial cell membrane permeability, evidenced by rapid unloading of 3-O-[3H]methyl-D-glucose. FFA acting as detergents appear to account for the bactericidal and bacteriolytic activity of rat pulmonary surfactant for pneumococci. PMID:6548228

Improved silicon carbide for advanced heat engines

NASA Technical Reports Server (NTRS)

Whalen, T. J.; Winterbottom, W. L.

1986-01-01

Work performed to develop silicon carbide materials of high strength and to form components of complex shape and high reliability is described. A beta-SiC powder and binder system was adapted to the injection molding process and procedures and process parameters developed capable of providing a sintered silicon carbide material with improved properties. The initial effort has been to characterize the baseline precursor materials (beta silicon carbide powder and boron and carbon sintering aids), develop mixing and injection molding procedures for fabricating test bars, and characterize the properties of the sintered materials. Parallel studies of various mixing, dewaxing, and sintering procedures have been carried out in order to distinguish process routes for improving material properties. A total of 276 MOR bars of the baseline material have been molded, and 122 bars have been fully processed to a sinter density of approximately 95 percent. The material has a mean MOR room temperature strength of 43.31 ksi (299 MPa), a Weibull characteristic strength of 45.8 ksi (315 MPa), and a Weibull modulus of 8.0. Mean values of the MOR strengths at 1000, 1200, and 14000 C are 41.4, 43.2, and 47.2 ksi, respectively. Strength controlling flaws in this material were found to consist of regions of high porosity and were attributed to agglomerates originating in the initial mixing procedures. The mean stress rupture lift at 1400 C of five samples tested at 172 MPa (25 ksi) stress was 62 hours and at 207 MPa (30 ksi) stress was 14 hours. New fluid mixing techniques have been developed which significantly reduce flaw size and improve the strength of the material. Initial MOR tests indicate the strength of the fluid-mixed material exceeds the baseline property by more than 33 percent.

Casting materials and their application in research and teaching.

PubMed

Haenssgen, Kati; Makanya, Andrew N; Djonov, Valentin

2014-04-01

From a biological point of view, casting refers to filling of anatomical and/or pathological spaces with extraneous material that reproduces a three-dimensional replica of the space. Casting may be accompanied by additional procedures such as corrosion, in which the soft tissue is digested out, leaving a clean cast, or the material may be mixed with radiopaque substances to allow x-ray photography or micro computed topography (µCT) scanning. Alternatively, clearing of the surrounding soft tissue increases transparency and allows visualization of the casted cavities. Combination of casting with tissue fixation allows anatomical dissection and didactic surgical procedures on the tissue. Casting materials fall into three categories namely, aqueous substances (India ink, Prussian blue ink), pliable materials (gelatins, latex, and silicone rubber), or hard materials (methyl methacrylates, polyurethanes, polyesters, and epoxy resins). Casting has proved invaluable in both teaching and research and many phenomenal biological processes have been discovered through casting. The choice of a particular material depends inter alia on the targeted use and the intended subsequent investigative procedures, such as dissection, microscopy, or µCT. The casting material needs to be pliable where anatomical and surgical manipulations are intended, and capillary-passable for ultrastructural investigations.

Data evaluation of trace elements determined in Nigerian coal using cluster procedures.

PubMed

Ewa, I O B

2004-05-01

Large data-sets of elements determined by instrumental neutron activation analysis (INAA) require meaningful interpretation in order to determine the pattern of their existence in host matrices. This could be achieved using cluster procedures. Element abundances (Al, As, Ba, Br, Ca, Ce, Cs, Dy, Eu, Fe, Ga, Gd, Hf, K, La, Lu, Mg, Mn, Na, O, Rb, Sb, Sc, Sm, Sr, Ta, Tb, Th, Ti, U, V, Yb, Zn and Zr) of prepared and run-of-mine coals from eight principal mines (Onyeama, Ogbete, Enugu, Gombe, Asaba-Ugwashi, Okaba, Afikpo and Lafia ) in Nigeria were determined by INAA. Quality control of the measurements was assured by the re-determination of a standard reference material, NIST 1632a. These data-sets were then tested for multi-variate statistics using METHOD = SINGLE in the cluster procedure. The computer-assisted package SAS was used to generate the dendrograms while the algorithm used was stored Euclidean distances. The results showed a recognition pattern, useful for the interpretation of coalification histories and the prediction of fuel ranking for Nigerian coals. High segregation of coal fly ash was observed, while metallurgical coal grouped together with high-ranking coals of Okaba, Enugu and Obi (Lafia). Further work revealed some of these coals as having high gross calorific value (7908 kcal kg(-1) for Enugu coal; 7200 kcal kg(-1) for Okaba) and low sulphur thereby making them efficient fuel materials.

A MATERIAL COST-MINIMIZATION ANALYSIS FOR HERNIA REPAIRS AND MINOR PROCEDURES DURING A SURGICAL MISSION IN THE DOMINICAN REPUBLIC

PubMed Central

Cavallo, Jaime A.; Ousley, Jenny; Barrett, Christopher D.; Baalman, Sara; Ward, Kyle; Borchardt, Malgorzata; Thomas, J. Ross; Perotti, Gary; Frisella, Margaret M.; Matthews, Brent D.

2013-01-01

INTRODUCTION Expenditures on material supplies and medications constitute the greatest per capita costs for surgical missions. We hypothesized that supply acquisition at nonprofit organization (NPO) costs would lead to significant cost-savings compared to supply acquisition at US academic institution costs from the provider perspective for hernia repairs and minor procedures during a surgical mission in the Dominican Republic (DR). METHODS Items acquired for a surgical mission were uniquely QR-coded for accurate consumption accounting. Both NPO and US academic institution unit costs were associated with each item in an electronic inventory system. Medication doses were recorded and QR-codes for consumed items were scanned into a record for each sampled procedure. Mean material costs and cost savings ± SDs were calculated in US dollars for each procedure type. Cost-minimization analyses between the NPO and the US academic institution platforms for each procedure type ensued using a two-tailed Wilcoxon matched-pairs test with α=0.05. Item utilization analyses generated lists of most frequently used materials by procedure type. RESULTS The mean cost savings of supply acquisition at NPO costs for each procedure type were as follows: $482.86 ± $683.79 for unilateral inguinal hernia repair (IHR, n=13); $332.46 ± $184.09 for bilateral inguinal hernia repair (BIHR, n=3); $127.26 ± $13.18 for hydrocelectomy (HC, n=9); $232.92 ± $56.49 for femoral hernia repair (FHR, n=3); $120.90 ± $30.51 for umbilical hernia repair (UHR, n=8); $36.59 ± $17.76 for minor procedures (MP, n=26); and $120.66 ± $14.61 for pediatric inguinal hernia repair (PIHR, n=7). CONCLUSION Supply acquisition at NPO costs leads to significant cost-savings compared to supply acquisition at US academic institution costs from the provider perspective for IHR, HC, UHR, MP, and PIHR during a surgical mission to DR. Item utilization analysis can generate minimum-necessary material lists for each procedure type to reproduce cost-savings for subsequent missions. PMID:24162140

Reflecting Equity and Diversity. Part I: Guidelines and Procedure for Evaluating Bias in Instructional Materials. Part II: Bias Awareness Training Worksheets. Part III: Bias Awareness and Procedure Training Course.

ERIC Educational Resources Information Center

Bebermeyer, Jim; Edmond, Mary, Ed.

Reflecting a need to prepare students for working in diverse organizations, this document was developed to increase school officials' awareness of bias in instructional materials and help them select bias-free materials. A number of the examples illustrate situations dealing with diversity in the workplace. The guide is divided into three parts:…

Preparation of Cytokine-activated NK Cells for Use in Adoptive Cell Therapy in Cancer Patients: Protocol Optimization and Therapeutic Potential.

PubMed

van Ostaijen-ten Dam, Monique M; Prins, Henk-Jan; Boerman, Gerharda H; Vervat, Carly; Pende, Daniela; Putter, Hein; Lankester, Arjan; van Tol, Maarten J D; Zwaginga, Jaap J; Schilham, Marco W

2016-01-01

Cell-based immunotherapy using donor-derived natural killer (NK) cells after allogeneic hematopoietic stem cell transplantation may be an attractive treatment of residual leukemia. This study aimed to optimize clinical grade production of a cytokine-activated NK-cell product. NK cells were isolated either by double depletion (CD3(-), CD19(-)) or by sequential depletion and enrichment (CD3(-,) CD56(+)) via CliniMACS from leukapheresis material and cultured in vitro with interleukin (IL)-2 or IL-15. Both NK cell isolation procedures yielded comparable recovery of NK cells and levels of T-cell contamination. After culture with cytokines, the CD3(-)CD56(+) procedure resulted in NK cells of higher purity, that is, less T cells and monocytes, higher viability, and a slightly higher yield than the CD3(-)CD19- procedure. CD69, NKp44, and NKG2A expression were higher on CD3(-)CD56(+) products, whereas lysis of Daudi cells was comparable. Five days of culture led to higher expression of CD69, NKp44, and NKp30 and lysis of K562 and Daudi cell lines. Although CD69 expression and lysis of Daudi cells were slightly higher in cultures with IL-2, T-cell contamination was lower with IL-15. Therefore, further experiments were performed with CD3(-)CD56(+) products cultured with IL-15. Cryopreservation of IL-15-activated NK cells resulted in a loss of cytotoxicity (>92%), whereas thawing of isolated, uncultured NK cells followed by culture with IL-15 yielded cells with about 43% of the original lytic activity. Five-day IL-15-activated NK cells lysed tumor target cell lines and primary leukemic blasts, providing the basis for NK cell–based immunotherapeutic strategies in a clinical setting.

Surface-Active Agents for Isolation of the Core Component of Avian Myeloblastosis Virus 1

PubMed Central

Stromberg, Kurt

1972-01-01

Sixty-one surface-active agents were evaluated in a procedure designed to assess their ability to remove the envelope from the core component of avian myeloblastosis virus (AMV). The procedure consisted of centrifugation of intact AMV through a series of sucrose gradients each containing an upper layer of agent at one of eight concentrations between 0.01 and 10%. The effectiveness of an agent in producing AMV cores was indicated by (i) the appearance of light-scattering bands in the region of core buoyant density in gradient tubes; (ii) the range of surfactant concentration over which these bands appeared; and (iii) an electron microscopy assessment by the negative-staining technique of the relative proportion of core to non-core material in each of these bands. Six nonionic surfactants were selected by this screening method for comparison in regard to recovery of core protein and endogenous ribonucleic acid (RNA)-dependent deoxyribonucleic acid (DNA) polymerase activity, as well as further morphologic evaluation by electron microscopy. The nonionic surfactants of the polyoxyethylene alcohol class (particularly, Sterox SL) were most effective. Nonionic surfactants of the polyoxyethylene alkylphenol class (particularly, Nonidet P-40) were also effective. Sterox SL and Nonidet P-40 each gave a more than fivefold increase in specific activity of endogenous RNA-dependent DNA polymerase, and each gave a low recovery of core protein. Sterox SL did not interfere to the extent that Nonidet P-40 did in procedures which involved spectrophotometric assay at 260 nm. The use of Sterox SL resulted in the least envelope contamination of core preparations by electron microscopy examination, the most recovery of protein and endogenous RNA-dependent DNA polymerase activity, and a core buoyant density in sucrose of 1.27 g/ml. Images PMID:4112071

Medical Service Clinical Laboratory Procedures--Bacteriology.

ERIC Educational Resources Information Center

Department of the Army, Washington, DC.

This manual presents laboratory procedures for the differentiation and identification of disease agents from clinical materials. Included are procedures for the collection of specimens, preparation of culture media, pure culture methods, cultivation of the microorganisms in natural and simulated natural environments, and procedures in…

A Rational Approach to Determine Minimum Strength Thresholds in Novel Structural Materials

NASA Technical Reports Server (NTRS)

Schur, Willi W.; Bilen, Canan; Sterling, Jerry

2003-01-01

Design of safe and survivable structures requires the availability of guaranteed minimum strength thresholds for structural materials to enable a meaningful comparison of strength requirement and available strength. This paper develops a procedure for determining such a threshold with a desired degree of confidence, for structural materials with none or minimal industrial experience. The problem arose in attempting to use a new, highly weight-efficient structural load tendon material to achieve a lightweight super-pressure balloon. The developed procedure applies to lineal (one dimensional) structural elements. One important aspect of the formulation is that it extrapolates to expected probability distributions for long length specimen samples from some hypothesized probability distribution that has been obtained from a shorter length specimen sample. The use of the developed procedure is illustrated using both real and simulated data.

Thermal stability and degradation kinetics of kenaf/sol-gel silica hybrid

NASA Astrophysics Data System (ADS)

Yusof, F. A. M.; Hashim, A. S.; Tajudin, Z.

2017-12-01

Thermal stability and degradation kinetics of kenaf/sol-gel silica hybrid materials was investigated by thermogravimetric analysis (TGA). Model-free iso-conversion Flynn-Wall-Ozawa (FWO) and Coats-Redfern-modified (CRm) were chosen to evaluate the activation energy of the kenaf (KF) and kenaf/sol-gel silica (KFS) at heating rates (β) of 10, 20, 30 and 40 °C/min. The results shows that an apparent activation energy was increased for the kenaf/sol-gel silica hybrid (211.59 kJ/mol for FWO and 191.55 kJ/mol for CRm) as compared to kenaf fiber (202.84 kJ/mol for FWO and 186.20 kJ/mol for CRm). Other parameters such as integral procedure decomposition temperature (IPDT), final residual weight (Rf), temperature of maximum degradation rate (Tmax) and residual at maximum temperature (RTmax) were obtained from TGA curves, additionally confirmed the thermal stability of the kenaf/sol-gel silica hybrid. These activation energy values and other findings developed the simplified approach in order to understand the thermal stability and degradation kinetics behavior of kenaf/sol-gel silica hybrid materials.

One-pot synthesis of transition metal ion-chelating ordered mesoporous carbon/carbon nanotube composites for active and durable fuel cell catalysts

NASA Astrophysics Data System (ADS)

Dombrovskis, Johanna K.; Palmqvist, Anders E. C.

2017-07-01

Development of non-precious metal catalysts for the oxygen reduction reaction (ORR) in proton exchange membrane (PEM) fuel cells with high activity and durability and with optimal water management properties is of outmost technological importance and highly challenging. Here we study the possibilities offered through judicious selection of small molecular precursors used for the formation of ordered mesoporous carbon-based non-precious metal ORR catalysts. By combining two complementary precursors, we present a one-pot synthesis that leads to a composite material consisting of transition metal ion-chelating ordered mesoporous carbon and multi-walled carbon nanotubes (TM-OMC/CNT). The resulting composite materials show high specific surface areas and a carbon structure that exhibits graphitic signatures. The synthesis procedure allows for tuning of the carbon structure, the surface area, the pore volume and the ratio of the two components of the composite. The TM-OMC/CNT composites were processed into membrane electrode assemblies and evaluated in single cell fuel cell measurements where they showed a combination of good ORR activity and very high durability.

The U.S. Geological Survey Geologic Collections Management System (GCMS)—A master catalog and collections management plan for U.S. Geological Survey geologic samples and sample collections

USGS Publications Warehouse

,

2015-01-01

The general consideration for implementation of the GCMS is that all active USGS geologic sample repositories will form the core of GCMS and that participating science centers will develop procedures based on proposed GCMS methodologies. The GCMS is a collective resource for the entire USGS community and the users who discover the geologic materials kept in these repositories and seek to access them.

An innovative chairside bleaching protocol for treating stained dentition: initial results.

PubMed

Miara, P

2000-09-01

For years, investigators have attempted to develop a predictable means of bleaching pathologically and nonpathologically stained dentition. While previous efforts have modified the concentration of the bleaching material, the duration of the procedure, and the manner by which the bleaching agent is activated, the ability to affect a significant shade improvement remains an elusive objective. This article demonstrates an innovative technique used to influence the penetration of oxygen ions into the tooth enamel, which may resolve this clinical dilemma.

FEMOS - Advanced Neutron Monitor System for Waste Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simon, G.G.; Sokcic-Kostic, M.

2006-07-01

FEMOS is a specially developed monitor to detect fissile materials for waste characterisation and it is also suitable to identify the main neutron emitters. The latest measuring prototype is in routine operation at FZK-HDB (Germany) for determining Plutonium content and alpha activity in 2001 and 4001 drums from the reprocessing plant Karlsruhe (WAK). Authorities license the measurement procedure. Routine measurements conducted over a period of about 6 years and the results show that all specified prerequisites are met with the required reliability. (authors)

Characterization of the carbonaceous materials obtained from different agro-industrial wastes.

PubMed

Ensuncho-Muñoz, A E; Carriazo, J G

2015-01-01

This paper reports the preparation and characterization of carbonaceous materials obtained from three types of vegetable wastes provided by agricultural industries. Soft carbonization (280°C) and H3PO4-activation procedures were used to convert the agricultural wastes to carbon powders with high adsorbent capacities. This process is excellent for eliminating and exploiting the huge masses (many tons) of vegetable residues remaining after each harvest every year in several Colombian agro-industries. The powders were characterized by X-ray diffraction (XRD), IR spectroscopy, scanning electron microscopy (SEM), and N2-adsorption isotherms. XRD and IR verified the formation of carbons, and SEM showed small particles (20-500 µm) with characteristic morphology for each type of residue used and abundant cavities of different sizes. The N2-adsorption analyses showed that the carbons had high adsorption capacities with important surface area values and large pore volumes. The use of the activated carbonaceous materials as adsorbent of azo dyes (allura red and sunset yellow) from aqueous solutions was evaluated. The results showed a good adsorption capacity indicating the potentiality of these materials as pollutant adsorbents in food industry wastewaters. These results indicate that these powders can be used as potential adsorbents for different gaseous or liquid pollutants.

Technological hurdles to the application of intercalated graphite fibers

NASA Technical Reports Server (NTRS)

Gaier, James R.

1988-01-01

Before intercalated graphite fibers can be developed as an effective power material, there are several technological hurdles which must be overcome. These include the environmental stability, homogeneity and bulk properties, connection procedures, and costs. Strides were made within the last several years in stability and homogeneity of intercalated graphite fibers. Bulk properties and connection procedures are areas of active research now. Costs are still prohibitive for all but the most demanding applications. None of these problems, however, appear to be unsolvable, and their solution may result in wide spread GOC application. The development of a relatively simple technology application, such as EMI shielding, would stimulate the solution of scale-up problems. Once this technology is developed, then more demanding applications, such as power bus bars, may be possible.

Conditioning Procedure for Spent Cs-137 Sealed Sources in Egypt

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mohamed, Y.T.; Hasan, M.A.; Lasheen, Y.F.

2006-07-01

It is the duty of the Hot Laboratories and Waste Management Center, Egyptian Atomic Energy Authority to mange the radioactive waste generated from any user for radioactive materials in Egypt. The most hazardous or dangerous radioactive waste we collect is spent radioactive sealed sources that have to be managed safely to protect human, workers and environment from any undue burden for radiation. Through the Integrated Management Program Of Radioactive Sealed Sources In Egypt, IMPRSS all spent Cs-137 sources with low activity will be retrievable conditioned in 200 L drum with special lead shield to keep the surface dose rate lowermore » than 200 merm/h according to US regulations and IAEA guidelines. Using this procedure the EAEA will condition about 243 sources in 9 drums. (authors)« less

Opsin vs opsin: New materials for biotechnological applications

NASA Astrophysics Data System (ADS)

Alfinito, Eleonora; Reggiani, Lino

2014-08-01

The need of new diagnostic methods satisfying, as an early detection, a low invasive procedure and a cost-efficient value, is orienting the technological research toward the use of bio-integrated devices, in particular, bio-sensors. The set of know-why necessary to achieve this goal is wide, from biochemistry to electronics and is summarized in an emerging branch of electronics, called proteotronics. Proteotronics is here applied to state a comparative analysis of the electrical responses coming from type-1 and type-2 opsins. In particular, the procedure is used as an early investigation of a recently discovered family of opsins, the proteorhodopsins activated by blue light, BPRs. The results reveal some interesting and unexpected similarities between proteins of the two families, suggesting the global electrical response are not strictly linked to the class identity.

Preparation And Analysis Of Specimens Of Ablative Materials

NASA Technical Reports Server (NTRS)

Solomon, William C.

1994-01-01

Procedure for chemical analysis of specimens of silicone-based ablative thermal-insulation materials SLA-561 and MA25 involves acid digestion of specimens to prepare them for analysis by inductively-coupled-plasma/atomic-emission spectroscopy (ICP/AES). In comparison with atomic-absorption spectroscopy (AAS), ICP/AES is faster and more accurate than AAS. Results of analyses stored in data base, used to trace variations in concentrations of chemical elements in materials during long-term storage, and used in timely manner in investigations of failures. Acid-digestion portion of procedure applied to other thermal-insulation materials containing room-temperature-vulcanizing silicones and enables instrumental analysis of these materials.

EXAFS: New tool for study of battery and fuel cell materials

NASA Technical Reports Server (NTRS)

Mcbreen, James; Ogrady, William E.; Pandya, Kaumudi I.

1987-01-01

Extended X ray absorption fine structure (EXAFS) is a powerful technique for probing the local atomic structure of battery and fuel cell materials. The major advantages of EXAFS are that both the probe and the signal are X rays and the technique is element selective and applicable to all states of matter. This permits in situ studies of electrodes and determination of the structure of single components in composite electrodes, or even complete cells. EXAFS specifically probes short range order and yields coordination numbers, bond distances, and chemical identity of nearest neighbors. Thus, it is ideal for structural studies of ions in solution and the poorly crystallized materials that are often the active materials or catalysts in batteries and fuel cells. Studies on typical battery and fuel cell components are used to describe the technique and the capability of EXAFS as a structural tool in these applications. Typical experimental and data analysis procedures are outlined. The advantages and limitations of the technique are also briefly discussed.

Separator Materials Used in Secondary Alkaline Batteries Characterized and Evaluated

NASA Technical Reports Server (NTRS)

1996-01-01

Nickel-cadmium (Ni/Cd) and nickel-hydrogen (Ni/H2) secondary alkaline batteries are vital to aerospace applications. Battery performance and cycle life are significantly affected by the type of separators used in those batteries. A team from NASA Lewis Research Center's Electrochemical Technology Branch developed standardized testing procedures to characterize and evaluate new and existing separator materials to improve performance and cycle life of secondary alkaline batteries. Battery separators must function as good electronic insulators and as efficient electrolyte reservoirs. At present, new types of organic and inorganic separator materials are being developed for Ni/Cd and Ni/H2 batteries. The separator material previously used in the NASA standard Ni/Cd was Pellon 2505, a 100-percent nylon-6 polymer that must be treated with zinc chloride (ZnCl2) to bond the fibers. Because of stricter Environmental Protection Agency regulation of ZnCl2 emissions, the battery community has been searching for new separators to replace Pellon 2505. As of today, two candidate separator materials have been identified; however, neither of the two materials have performed as well as Pellon 2505. The separator test procedures that were devised at Lewis are being implemented to expedite the search for new battery separators. The new test procedures, which are being carried out in the Separator Laboratory at Lewis, have been designed to guarantee accurate evaluations of the properties that are critical for sustaining proper battery operation. These properties include physical and chemical stability, chemical purity, gas permeability, electrolyte retention and distribution, uniformity, porosity, and area resistivity. A manual containing a detailed description of 12 separator test procedures has been drafted and will be used by the battery community to evaluate candidate separator materials for specific applications. These standardized procedures will allow for consistent, uniform, and reliable results that will ensure that separator materials have the desired properties for long life and good performance in secondary alkaline cells.

49 CFR 192.283 - Plastic pipe: Qualifying joining procedures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Materials Other Than by Welding § 192.283 Plastic pipe: Qualifying joining procedures. (a) Heat fusion... for making plastic pipe joints by a heat fusion, solvent cement, or adhesive method, the procedure...

49 CFR 192.283 - Plastic pipe: Qualifying joining procedures.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Materials Other Than by Welding § 192.283 Plastic pipe: Qualifying joining procedures. (a) Heat fusion... for making plastic pipe joints by a heat fusion, solvent cement, or adhesive method, the procedure...

49 CFR 192.283 - Plastic pipe: Qualifying joining procedures.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Materials Other Than by Welding § 192.283 Plastic pipe: Qualifying joining procedures. (a) Heat fusion... for making plastic pipe joints by a heat fusion, solvent cement, or adhesive method, the procedure...

49 CFR 192.283 - Plastic pipe: Qualifying joining procedures.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Materials Other Than by Welding § 192.283 Plastic pipe: Qualifying joining procedures. (a) Heat fusion... for making plastic pipe joints by a heat fusion, solvent cement, or adhesive method, the procedure...

A new organic-rich soil reference material certified for its EDTA- and acetic acid- extractable contents of Cd, Cr, Cu, Ni, Pb and Zn, following collaboratively tested and harmonised procedures.

PubMed

Pueyo, M; Rauret, G; Bacon, J R; Gomez, A; Muntau, H; Quevauviller, P; López-Sánchez, J F

2001-02-01

There is an increasing requirement for assessment of the bioavailable metal fraction and the mobility of trace elements in soils upon disposal. One of the approaches is the use of leaching procedures, but the results obtained are operationally defined; therefore, their significance is highly dependent on the extraction protocol performed. So, for this type of study, there is a need for reference materials that allow the quality of measurements to be controlled. This paper describes the steps involved in the certification of an organic-rich soil reference material, BCR-700, for the EDTA- and acetic acid-extractable contents of some trace elements, following collaboratively tested and harmonised extraction procedures. Details are given for the preparation of the soil, homogeneity and stability testing, analytical procedures and the statistical selection of data to be included in the certification.

7 CFR 1753.48 - Procurement procedures.

Code of Federal Regulations, 2011 CFR

2011-01-01

... that is estimated to cost $250,000, or less, inclusive of labor and materials. (2) The procedures to be...) Materials on hand, until released to the contractor, shall be covered by fire and either wind-storm or... construction are necessary, and the cost of such changes or corrections is properly chargeable to the borrower...

7 CFR 1753.48 - Procurement procedures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... that is estimated to cost $250,000, or less, inclusive of labor and materials. (2) The procedures to be...) Materials on hand, until released to the contractor, shall be covered by fire and either wind-storm or... construction are necessary, and the cost of such changes or corrections is properly chargeable to the borrower...

7 CFR 1753.48 - Procurement procedures.

Code of Federal Regulations, 2013 CFR

2013-01-01

... that is estimated to cost $250,000, or less, inclusive of labor and materials. (2) The procedures to be...) Materials on hand, until released to the contractor, shall be covered by fire and either wind-storm or... construction are necessary, and the cost of such changes or corrections is properly chargeable to the borrower...

7 CFR 1753.48 - Procurement procedures.

Code of Federal Regulations, 2014 CFR

2014-01-01

... that is estimated to cost $250,000, or less, inclusive of labor and materials. (2) The procedures to be...) Materials on hand, until released to the contractor, shall be covered by fire and either wind-storm or... construction are necessary, and the cost of such changes or corrections is properly chargeable to the borrower...

46 CFR 197.206 - Substitutes for required equipment, materials, apparatus, arrangements, procedures, or tests.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Substitutes for required equipment, materials, apparatus, arrangements, procedures, or tests. 197.206 Section 197.206 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE OCCUPATIONAL SAFETY AND HEALTH STANDARDS GENERAL PROVISIONS Commercial Diving Operations General § 197.206...

46 CFR 159.007-3 - Production inspections and tests: Independent laboratory's procedures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 6 2011-10-01 2011-10-01 false Production inspections and tests: Independent laboratory's procedures. 159.007-3 Section 159.007-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL APPROVAL OF EQUIPMENT AND MATERIALS Production Inspection and Tests of...

46 CFR 159.007-3 - Production inspections and tests: Independent laboratory's procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false Production inspections and tests: Independent laboratory's procedures. 159.007-3 Section 159.007-3 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL APPROVAL OF EQUIPMENT AND MATERIALS Production Inspection and Tests of...

Text, Graphics, and Multimedia Materials Employed in Learning a Computer-Based Procedural Task

ERIC Educational Resources Information Center

Coffindaffer, Kari Christine Carlson

2010-01-01

The present research study investigated the interaction of graphic design students with different forms of software training materials. Four versions of the procedural task instructions were developed (A) Traditional Textbook with Still Images, (B) Modified Text with Integrated Still Images, (C) Onscreen Modified Text with Silent Onscreen Video…

77 FR 52625 - Petition Requesting Rulemaking To Revise Test Procedures for Glazing Materials in Architectural...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-30

... contains notices to the public of #0;the proposed issuance of rules and regulations. The purpose of these... architectural products set forth in our regulations, with those testing procedures contained in ANSI Z97.1, ``American National Standard for Safety Glazing Materials Used in Building--Safety Performance Specifications...