Microgravity Materials Science Conference 2000. Volume 1

NASA Technical Reports Server (NTRS)

Ramachandran, Narayanan (Editor); Bennett, Nancy (Editor); McCauley, Dannah (Editor); Murphy, Karen (Editor); Poindexter, Samantha (Editor)

2001-01-01

This is Volume 1 of 3 of the 2000 Microgravity Material Science Conference that was held June 6-8 at the Von Braun Center, Huntsville, Alabama. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division (MRD) at NASA Headquarters, and hosted by NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the fourth NASA conference of this type in the microgravity materials science discipline. The microgravity science program sponsored approx. 200 investigators, all of whom made oral or poster presentations at this conference. In addition, posters and exhibits covering NASA microgravity facilities, advanced technology development projects sponsored by the NASA Microgravity Research Division at NASA Headquarters, and commercial interests were exhibited. The purpose of the conference was to inform the materials science community of research opportunities in reduced gravity and to highlight the Spring 2001 release of the NASA Research Announcement (NRA) to solicit proposals for future investigations. It also served to review the current research and activities in materials science, to discuss the envisioned long-term goals. and to highlight new crosscutting research areas of particular interest to MRD. The conference was aimed at materials science researchers from academia, industry, and government. A workshop on in situ resource utilization (ISRU) was held in conjunction with the conference with the goal of evaluating and prioritizing processing issues in Lunar and Martian type environments. The workshop participation included invited speakers and investigators currently funded in the material science program under the Human Exploration and Development of Space (HEDS) initiative. The conference featured a plenary session every day with an invited speaker that was followed by three parallel breakout sessions in subdisciplines. Attendance was close to 350 people. Posters were available for viewing during the conference and a dedicated poster session was held on the second day. Nanotechnology radiation shielding materials, Space Station science opportunities, biomaterials research, and outreach and educational aspects of the program were featured in the plenary talks. This volume, the first to be released on CD-ROM for materials science, is comprised of the research reports submitted by the Principal Investigators at the conference.

Microgravity Materials Science Conference 2000. Volume 3

NASA Technical Reports Server (NTRS)

Ramachandran, Narayanan; Bennett, Nancy; McCauley, Dannah; Murphy, Karen; Poindexter, Samantha

2001-01-01

This is Volume 3 of 3 of the 2000 Microgravity Materials Science Conference that was held June 6-8 at the Von Braun Center, Huntsville, Alabama. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division (MRD) at NASA Headquarters, and hosted by NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the fourth NASA conference of this type in the Microgravity materials science discipline. The microgravity science program sponsored 200 investigators, all of whom made oral or poster presentations at this conference- In addition, posters and exhibits covering NASA microgravity facilities, advanced technology development projects sponsored by the NASA Microgravity Research Division at NASA Headquarters, and commercial interests were exhibited. The purpose of the conference was to inform the materials science community of research opportunities in reduced gravity and to highlight the Spring 2001 release of the NASA Research Announcement (NRA) to solicit proposals for future investigations. It also served to review the current research and activities in material,, science, to discuss the envisioned long-term goals. and to highlight new crosscutting research areas of particular interest to MRD. The conference was aimed at materials science researchers from academia, industry, and government. A workshop on in situ resource utilization (ISRU) was held in conjunction with the conference with the goal of evaluating and prioritizing processing issues in Lunar and Martian type environments. The workshop participation included invited speakers and investigators currently funded in the material science program under the Human Exploration and Development of Space (HEDS) initiative. The conference featured a plenary session every day with an invited speaker that was followed by three parallel breakout sessions in subdisciplines. Attendance was close to 350 people, Posters were available for viewing during the conference and a dedicated poster session was held on the second day. Nanotechnology, radiation shielding materials, Space Station science opportunities, biomaterials research, and outreach and educational aspects of the program were featured in the plenary talks. This volume, the first to be released on CD-ROM for materials science, is comprised of the research reports submitted by the Principal Investigators at the conference.

Microgravity Materials Science Conference 2000. Volume 2

NASA Technical Reports Server (NTRS)

Ramachandran, Narayanan (Editor); Bennett, Nancy (Editor); McCauley, Dannah (Editor); Murphy, Karen (Editor); Poindexter, Samantha (Editor)

2001-01-01

This is Volume 2 of 3 of the 2000 Microgravity Materials Science Conference that was held June 6-8 at the Von Braun Center, Huntsville, Alabama. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division (MRD) at NASA Headquarters, and hosted by NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the fourth NASA conference of this type in the Microgravity materials science discipline. The microgravity science program sponsored approx. 200 investigators, all of whom made oral or poster presentations at this conference- In addition, posters and exhibits covering NASA microgravity facilities, advanced technology development projects sponsored by the NASA Microgravity Research Division at NASA Headquarters, and commercial interests were exhibited. The purpose of the conference %%,its to inform the materials science community of research opportunities in reduced gravity and to highlight the Spring 2001 release of the NASA Research Announcement (NRA) to solicit proposals for future investigations. It also served to review the current research and activities in material,, science, to discuss the envisioned long-term goals. and to highlight new crosscutting research areas of particular interest to MRD. The conference was aimed at materials science researchers from academia, industry, and government. A workshop on in situ resource utilization (ISRU) was held in conjunction with the conference with the goal of evaluating and prioritizing processing issues in Lunar and Martian type environments. The workshop participation included invited speakers and investigators currently funded in the material science program under the Human Exploration and Development of Space (HEDS) initiative. The conference featured a plenary session every day with an invited speaker that was followed by three parallel breakout sessions in subdisciplines. Attendance was close to 350 people, Posters were available for viewing during the conference and a dedicated poster session was held on the second day. Nanotechnology, radiation shielding materials, Space Station science opportunities, biomaterials research, and outreach and educational aspects of the program were featured in the plenary talks. This volume, the first to be released on CD-ROM for materials science, is comprised of the research reports submitted by the Principal Investigators at the conference.

PREFACE: 7th EEIGM International Conference on Advanced Materials Research

NASA Astrophysics Data System (ADS)

Joffe, Roberts

2013-12-01

The 7th EEIGM Conference on Advanced Materials Research (AMR 2013) was held at Luleå University of Technology on the 21-22 March 2013 in Luleå, SWEDEN. This conference is intended as a meeting place for researchers involved in the EEIGM programme, in the 'Erasmus Mundus' Advanced Materials Science and Engineering Master programme (AMASE) and the 'Erasmus Mundus' Doctoral Programme in Materials Science and Engineering (DocMASE). This is great opportunity to present their on-going research in the various fields of Materials Science and Engineering, exchange ideas, strengthen co-operation as well as establish new contacts. More than 60 participants representing six countries attended the meeting, in total 26 oral talks and 19 posters were presented during two days. This issue of IOP Conference Series: Materials Science and Engineering presents a selection of articles from EEIGM-7 conference. Following tradition from previous EEIGM conferences, it represents the interdisciplinary nature of Materials Science and Engineering. The papers presented in this issue deal not only with basic research but also with applied problems of materials science. The presented topics include theoretical and experimental investigations on polymer composite materials (synthetic and bio-based), metallic materials and ceramics, as well as nano-materials of different kind. Special thanks should be directed to the senior staff of Division of Materials Science at LTU who agreed to review submitted papers and thus ensured high scientific level of content of this collection of papers. The following colleagues participated in the review process: Professor Lennart Walström, Professor Roberts Joffe, Professor Janis Varna, Associate Professor Marta-Lena Antti, Dr Esa Vuorinen, Professor Aji Mathew, Professor Alexander Soldatov, Dr Andrejs Purpurs, Dr Yvonne Aitomäki, Dr Robert Pederson. Roberts Joffe October 2013, Luleå Conference photograph EEIGM7 conference participants, 22 March 2013 The PDF contains the book of abstracts.

PREFACE: 1st International Conference on Rheology and Modeling of Materials

NASA Astrophysics Data System (ADS)

Gömze, László A.

2015-04-01

Understanding the rheological properties of materials and their rheological behaviors during their manufacturing processes and in their applications in many cases can help to increase the efficiency and competitiveness not only of the finished goods and products but the organizations and societies also. The more scientific supported and prepared organizations develop more competitive products with better thermal, mechanical, physical, chemical and biological properties and the leading companies apply more competitive knowledge, materials, equipment and technology processes. The idea to organize in Hungary the 1st International Conference on Rheology and Modeling of Materials we have received from prospective scientists, physicists, chemists, mathematicians and engineers from Asia, Europe, North and South America including India, Korea, Russia, Turkey, Estonia, France, Italy, United Kingdom, Chile, Mexico and USA. The goals of ic-rmm1 the 1st International Conference on Rheology and Modeling of Materials are the following: • Promote new methods and results of scientific research in the fields of modeling and measurements of rheological properties and behavior of materials under processing and applications. • Change information between the theoretical and applied sciences as well as technical and technological implantations. • Promote the communication between the scientists of different disciplines, nations, countries and continents. The international conference ic-rmm1 provides a platform among the leading international scientists, researchers, PhD students and engineers for discussing recent achievements in measurement, modeling and application of rheology in materials technology and materials science of liquids, melts, solids, crystals and amorphous structures. Among the major fields of interest are the influences of material structures, mechanical stresses temperature and deformation speeds on rheological and physical properties, phase transformation of foams, foods, polymers, plastics and other competitive materials like ceramics, nanomaterials, medical- and biomaterials, cosmetics, coatings, light metals, alloys, glasses, films, composites, hetero-modulus, hetero-viscous, hetero-plastic complex materials, petrochemicals and hybrid materials, ...etc. Multidisciplinary applications of rheology and rheological modeling in material science and technology encountered in sectors like alloys, ceramics, glasses, thin films, polymers, clays, construction materials, energy, aerospace, automotive and marine industry. Rheology in food, chemistry, medicine, biosciences and environmental sciences are of particular interests. In accordance to the program of the conference ic-rmm1 more than 160 inquiries and registrations were received from 51 countries. Finally the scientists and researchers have arrived to our conference from 42 countries. Including co-authors, the research work of more than 300 scientists are presented in this book.

RADIATION CHEMISTRY 2010 GORDON RESEARCH CONFERENCE JULY 18-23

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas Orlando

The 2010 Gordon Conference on Radiation Chemistry will present cutting edge research regarding the study of radiation-induced chemical transformations. Radiation Chemistry or 'high energy' chemistry is primarily initiated by ionizing radiation: i.e. photons or particles with energy sufficient to create conduction band electrons and 'holes', excitons, ionic and neutral free radicals, highly excited states, and solvated electrons. These transients often interact or 'react' to form products vastly different than those produced under thermal equilibrium conditions. The non-equilibrium, non-thermal conditions driving radiation chemistry exist in plasmas, star-forming regions, the outer solar system, nuclear reactors, nuclear waste repositories, radiation-based medical/clinical treatment centersmore » and in radiation/materials processing facilities. The 2010 conference has a strong interdisciplinary flavor with focus areas spanning (1) the fundamental physics and chemistry involved in ultrafast (atto/femtosecond) energy deposition events, (2) radiation-induced processes in biology (particularly spatially resolved studies), (3) radiation-induced modification of materials at the nanoscale and cosmic ray/x-ray mediated processes in planetary science/astrochemistry. While the conference concentrates on fundamental science, topical applied areas covered will also include nuclear power, materials/polymer processing, and clinical/radiation treatment in medicine. The Conference will bring together investigators at the forefront of their field, and will provide opportunities for junior scientists and graduate students to present work in poster format or as contributors to the Young Investigator session. The program and format provides excellent avenues to promote cross-disciplinary collaborations.« less

Proceedings of the Sixth Applied Diamond Conference/Second Frontier Carbon Technology Joint Conference (ADC/FCT 2001)

NASA Technical Reports Server (NTRS)

Tzeng, Y. (Editor); Miyoshi, K. (Editor); Yoshikawa, M. (Editor); Murakawa, M. (Editor); Koga, Y. (Editor); Kobashi, K. (Editor); Amaratunga, G. A. J. (Editor)

2001-01-01

These are the Proceedings of the Sixth Applied Diamond Conference/Second Frontier Carbon Technology Joint Conference hosted by Auburn University from August 6 to 10, 2001. The diamond CVD process was first reported by Dr. Spitsyn in 1981 and Prof. S. Iijima reported his discovery of carbon nanotubes in 1991. In the past years, both diamond-related materials and novel carbon materials have attracted considerable interest by the scientific, technological, and industrial community. Many practical and commercial products of diamond materials are reported in these proceedings. A broad variety of applications of carbon nanotubes and novel carbons have also been explored and demonstrated. Having more than 200 invited and contributing papers by authors from over 20 countries for presentations at ADC/FCT 2001 clearly demonstrates that these materials, due to the combination of their superior properties, are both scientifically amazing and economically significant.

ICOM2012: 3rd International Conference on the Physics of Optical Materials and Devices (Belgrade, Serbia, 2-6 September 2012)

NASA Astrophysics Data System (ADS)

Dramićanin, Miroslav D.; Antić, Željka; Viana, Bruno

2013-11-01

The 3rd International Conference on the Physics of Optical Materials and Devices (ICOM2012) was held in Belgrade (Serbia) from 2 to 6 September 2012 (figure 1). The conference was organized by the Vinča Institute of Nuclear Sciences, University of Belgrade (Serbia) and the Laboratoire de Chimie de la Matière Condensée de Paris (France), and supported by the Ministry of Education, Science and Technological Development of the Republic of Serbia and Optical Society of America. ICOM2012 was a follow-up to the two previous, successful ICOM conferences held in Herceg Novi in 2006 and 2009. The conference aimed at providing a forum for scientists in optical materials to debate on: • Luminescent materials and nanomaterials • Hybrid optical materials (organic/inorganic) • Characterization techniques of optical materials • Luminescence mechanisms and energy transfers • Theory and modeling of optical processes • Ultrafast-laser processing of materials • Optical sensors • Medical imaging • Advanced optical materials in photovoltaics and biophotonics • Photothermal and photoacoustic spectroscopy and phenomena The conference stressed the value of a fundamental scientific understanding of optical materials. A particular accent was put on wide band-gap materials in crystalline, glass and nanocrystalline forms. The applications mainly involved lasers, scintillators and phosphors. Rare earth and transition metal ions introduced as dopants in various hosts were considered, and their impact on the optical properties were detailed in several presentations. This volume contains selected contributions of speakers and participants of the ICOM2012 conference. The conference provided a unique opportunity for about 200 scientists from 32 countries to discuss recent progress in the field of optical materials. During the three and half days, 21 invited talks and 52 contributed lectures were given, with a special event in memory of our dear colleague Professor Dr Tsoltan Basiev (Russia). In addition, 183 posters were presented and the two Young Scientist Awards were announced at the closing ceremony. Acknowledgments We thank all the authors for their valuable research contribution presented in this volume. We express our acknowledgements to all reviewers with a special thanks to Dr G Watt, then Publisher of the journal, for accepting the publication of these papers in a special issue of Physica Scripta . We wish to express our gratitude to the members of the ICOM scientific advisory committee and organizing committee for their excellent work and commitment for the success of ICOM2012.

Annual Quality Assurance Conference Abstracts by Barbara Marshik

EPA Pesticide Factsheets

25th Annual Quality Assurance Conference. Abstracts: Material and Process Conditions for Successful Use of Extractive Sampling Techniques and Certification Methods Errors in the Analysis of NMHC and VOCs in CNG-Based Engine Emissions by Barbara Marshik

Beneficial reuse `96: The fourth annual conference on the recycle and reuse of radioactive scrap metal

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-02-01

From October 22-24, 1996 the University of Tennessee`s Energy, Environment and Resources Center and the Oak Ridge National Laboratory`s Center for Risk Management cosponsored Beneficial Reuse `96: The Fourth Annual Conference on the Recycle and Reuse of Radioactive Materials. Along with the traditional focus on radioactive scrap metals, this year`s conference included a wide range of topics pertaining to naturally occurring radioactive materials (NORM), and contaminated concrete reuse applications. As with previous Beneficial Reuse conferences, the primary goal of this year`s conference was to bring together stakeholder representatives for presentations, panel sessions and workshops on significant waste minimization issues surroundingmore » the recycle and reuse of contaminated metals and other materials. A wide range of industry, government and public stakeholder groups participated in this year`s conference. An international presence from Canada, Germany and Korea helped to make Beneficial Reuse `96 a well-rounded affair. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.« less

Understanding Silence: An Investigation of the Processes of Silencing in Parent-Teacher Conferences with Somali Diaspora Parents in Danish Public Schools

ERIC Educational Resources Information Center

Matthiesen, Noomi Christine Linde

2016-01-01

This article questions the dominant understanding that immigrant and refugee parents in parent-teacher conferences are silent because they come from a culture where one does not question the authority of the teacher. Instead, it is argued that they "become" silent through certain interactional processes. Building on material from an…

Third Aerospace Environmental Technology Conference

NASA Technical Reports Server (NTRS)

Whitaker, A. F. (Editor); Cross, D. R. (Editor); Caruso, S. V. (Editor); Clark-Ingram, M. (Editor)

1999-01-01

The elimination of CFC's, Halons, TCA, other ozone depleting chemicals, and specific hazardous materials is well underway. The phaseout of these chemicals has mandated changes and new developments in aerospace materials and processes. We are beyond discovery and initiation of these new developments and are now in the implementation phase. This conference provided a forum for materials and processes engineers, scientists, and managers to describe, review, and critically assess the evolving replacement and clean propulsion technologies from the standpoint of their significance, application, impact on aerospace systems, and utilization by the research and development community. The use of these new technologies, their selection and qualification, their implementation, and the needs and plans for further developments are presented.

42 CFR 93.511 - Prehearing conferences.

Code of Federal Regulations, 2011 CFR

2011-10-01

... RESEARCH MISCONDUCT Opportunity To Contest ORI Findings of Research Misconduct and HHS Administrative Actions Hearing Process § 93.511 Prehearing conferences. (a) The ALJ must schedule an initial prehearing..., specification of disputes of fact and their materiality to the ORI findings of research misconduct and any HHS...

PREFACE: Processing, Microstructure and Performance of Materials

NASA Astrophysics Data System (ADS)

Chiu, Yu Lung; Chen, John J. J.; Hodgson, Michael A.; Thambyah, Ashvin

2009-07-01

A workshop on Processing, Microstructure and Performance of Materials was held at the University of Auckland, School of Engineering, on 8-9 April 2009. Organised by the Department of Chemical and Materials Engineering, University of Auckland, this meeting consisted of international participants and aimed at addressing the state-of-the-art research activities in processing, microstructure characterization and performance integrity investigation of materials. This two-day conference brought together scientists and engineers from New Zealand, Australia, Hong Kong, France, and the United Kingdom. Undoubtedly, this diverse group of participants brought a very international flair to the proceedings which also featured original research papers on areas such as Materials processing; Microstructure characterisation and microanalysis; Mechanical response at different length scales, Biomaterials and Material Structural integrity. There were a total of 10 invited speakers, 16 paper presentations, and 14 poster presentations. Consequently, the presentations were carefully considered by the scientific committee and participants were invited to submit full papers for this volume. All the invited paper submissions for this volume have been peer reviewed by experts in the various fields represented in this conference, this in accordance to the expected standards of the journal's Peer review policy for IOP Conference Series: Materials Science and Engineering. The works in this publication consists of new and original research as well as several expert reviews of current state-of-the art technologies and scientific developments. Knowing some of the real constraints on hard-copy publishing of high quality, high resolution images, the editors are grateful to IOP Publishing for this opportunity to have the papers from this conference published on the online open-access platform. Listed in this volume are papers on a range of topics on materials research, including Ferguson's high strain rate deformation studies of wood, Nebosky et al's manufacturing methods of tantalum metal implant material, Tan et al's self-healing materials, Gabbitas et al's work on titanium alloys and others. Also among the review papers, topics include that on small-scale plasticity by Ng and Ngan showing how distinct plasticity between micro- and macro-specimens can be interpreted by size-dependent dislocation activities; and the latest advancements in electron microscopy, with a special emphasis on its application to materials engineering. Niche areas such as cartilage, dental and biomineralisation research are also included in several of the papers, as a recognition of the rapidly growing interest in biological materials research and its clinical relevance. Decidedly a resounding success, the conference and this volume owes much to all the individuals, organising committee, helpers and participants, who have taken time out to put in the effort of organising the meeting, preparing the presentations and writing the papers.

Nonlinear Multiscale Modeling of 3D Woven Fiber Composites under Ballistic Loading

DTIC Science & Technology

2013-07-11

contact parameters on the underlying damage processes is being studied and worked on. We further develop a material model suitable particularly for...of Material and Process Engineering. 2011/05/23 00:00:00, . : , TOTAL: 1 (d) Manuscripts Number of Peer-Reviewed Conference Proceeding publications...continuum damage mechanics suitable for polymer materials. The effect of contact parameters on the underlying damage processes is being studied and

PREFACE: The Second Conference on Microelectronics, Microsystems and Nanotechnology

NASA Astrophysics Data System (ADS)

Nassiopoulou, Androula G.; Papanikolaou, Nikos; Tsamis, Christos

2005-01-01

The Second Conference on Microelectronics, Microsystems and Nanotechnology took place at the National Centre for Scientific Research `Demokritos', in Athens, Greece, between 14 and 17 November 2004. The conference was organized by the Institute of Microelectronics (IMEL) with the aim to bring together scientists and engineers working in the above exciting fields in an interactive forum. The conference included 45 oral presentations with 9 invited papers and was attended by 146 participants from 16 countries. The topics covered were nanotechnologies, quantum devices, sensors, micro- and nano-systems, semiconductor devices, C-MOS fabrication and characterization techniques, new materials, and IC design. Quantum devices and nanostructured materials attracted considerable attention. Both theoretical and experimental studies of metallic and semiconducting quantum systems were presented, with emphasis on their applications in electronics, optoelectronics, and nanocrystal memory devices. Another exciting topic was the recent developments in biocompatible lithographic processes for applications in biosensors. In particular novel processes for bio-friendly lithography, together with innovations in Si sensors for applications in medicine and food industry were presented. Recent developments and perspectives in CMOS technology towards the ultimate limit were also discussed. The conference covered issues and concepts of IC design with two invited talks on RF design and cryptography.The conference included presentations from several companies active in the field of microelectronics and systems in Greece.

PREFACE: 11th Asia-Pacific Conference on Plasma Science and Technology (APCPST-11) and 25th Symposium on Plasma Science for Materials (SPSM-25)

NASA Astrophysics Data System (ADS)

Watanabe, Takayuki; Kaneko, Toshio; Sekine, Makoto; Tanaka, Yasunori

2013-06-01

The 11th Asia-Pacific Conference on Plasma Science and Technology (APCPST-11) was held in Kyoto, Japan on 2-5 October 2012 with the 25th Symposium on Plasma Science for Materials (SPSM-25). SPSM has been held annually since 1988 under the sponsorship of The 153rd Committee on Plasma Materials Science, Japan Society for the Promotion of Science (JSPS). This symposium is one of the major activities of the Committee, which is organized by researchers in academia and industry for the purpose of advancing intersectional scientific information exchange and discussion of science and technology of plasma materials processing. APCPST and SPSM are jointly held biennially to survey the current status of low temperature and thermal plasma physics and chemistry for industrial applications. The whole area of plasma processing was covered from fundamentals to applications. Previous meetings were held in China, Japan, Korea, and Australia, attended by scientists from the Asia-Pacific and other countries. The joint conference was organized in plenary lectures, invited, contributed oral presentations and poster sessions. At this meeting, we had 386 participants from 10 countries and 398 presentations, including 26 invited presentations. This year, we arranged special topical sessions that covered green innovation, life innovation, and technical reports from industry. This conference seeks to bring the plasma community together and to create a forum for discussing the latest developments and issues, the challenges ahead in the field of plasma research and applications among engineers and scientists in Asia, the Pacific Rim, as well as Europe. This volume presents 44 papers that were selected via a strict peer-review process from full papers submitted for the proceedings of the conference. The topics range from the basic physics and chemistry of plasma processing to a broad variety of materials processing and environmental applications. This volume offers an overview of recent advances in thermal and non-equilibrium plasmas as well as on more new and innovative developments in the field of life innovation, green innovation and a technical report session. The editors hope that this volume will be useful and helpful for deepening our understanding of science and technology of plasma materials processing and also for stimulating further development of the plasma technology. Finally, we would like to thank the conference chairmen, the members of the organizing committee, the advisory committee, the executive committee, the program committee, the publication committee, organizing secretariat and financial support from The 153rd Committee on Plasma Materials Science, JSPS. Sponsors and Supporting Organization: The 153rd Committee on Plasma Materials Science, Japan Society for the Promotion of Science Organizing Committee Chairperson: Osamu Tsuji, SAMCO Corporation, Japan Advisory Committee Chairperson: Akihisa Matsuda, Osaka University, Japan Executive Committee Chairperson: Masaru Hori, Nagoya University, Japan Program Committee Chairperson: Takamasa Ishigaki, Hosei University, Japan Publication Committee Chairperson: Takayuki Watanabe, Kyushu University Editors of APCPST-11 and SPMS-25 Professor Takayuki Watanabe, Kyushu University, Japan Professor Toshio Kaneko, Tohoku University, Japan Professor Makoto Sekine, Nagoya University, Japan Professor Yasunori Tanaka, Kanazawa University, Japan

PREFACE: International Conference on Applied Sciences 2015 (ICAS2015)

NASA Astrophysics Data System (ADS)

Lemle, Ludovic Dan; Jiang, Yiwen

2016-02-01

The International Conference on Applied Sciences ICAS2015 took place in Wuhan, China on June 3-5, 2015 at the Military Economics Academy of Wuhan. The conference is regularly organized, alternatively in Romania and in P.R. China, by Politehnica University of Timişoara, Romania, and Military Economics Academy of Wuhan, P.R. China, with the joint aims to serve as a platform for exchange of information between various areas of applied sciences, and to promote the communication between the scientists of different nations, countries and continents. The topics of the conference cover a comprehensive spectrum of issues from: >Economical Sciences and Defense: Management Sciences, Business Management, Financial Management, Logistics, Human Resources, Crisis Management, Risk Management, Quality Control, Analysis and Prediction, Government Expenditure, Computational Methods in Economics, Military Sciences, National Security, and others... >Fundamental Sciences and Engineering: Interdisciplinary applications of physics, Numerical approximation and analysis, Computational Methods in Engineering, Metallic Materials, Composite Materials, Metal Alloys, Metallurgy, Heat Transfer, Mechanical Engineering, Mechatronics, Reliability, Electrical Engineering, Circuits and Systems, Signal Processing, Software Engineering, Data Bases, Modeling and Simulation, and others... The conference gathered qualified researchers whose expertise can be used to develop new engineering knowledge that has applicability potential in Engineering, Economics, Defense, etc. The number of participants was 120 from 11 countries (China, Romania, Taiwan, Korea, Denmark, France, Italy, Spain, USA, Jamaica, and Bosnia and Herzegovina). During the three days of the conference four invited and 67 oral talks were delivered. Based on the work presented at the conference, 38 selected papers have been included in this volume of IOP Conference Series: Materials Science and Engineering. These papers present new research in the various fields of Materials Engineering, Mechanical Engineering, Computers Engineering, and Electrical Engineering. It's our great pleasure to present this volume of IOP Conference Series: Materials Science and Engineering to the scientific community to promote further research in these areas. We sincerely hope that the papers published in this volume will contribute to the advancement of knowledge in the respective fields.

2nd International Conference on Rheology and Modeling of Materials (IC-RMM2)

NASA Astrophysics Data System (ADS)

2017-01-01

Understanding the rheological properties of materials and their rheological behaviors during their manufacturing processes and in their applications in many cases can help to increase the efficiency and competitiveness not only of the finished goods and products but the organizations and societies also. The more scientific supported and prepared organizations develop more competitive products with better thermal, mechanical, physical, chemical and biological properties and the leading companies apply more competitive equipment and technology processes. The aims of the 2nd International Conference on Rheology and Modeling of Materials (ic-rmm2) and the parallel organized symposiums of the 1st International Symposium on Powder Injection Molding (is-pim1) and the 1st International Symposium on Rheology and Fracture of Solids (is-rfs1) are the followings: Promote new methods and results of scientific research in the fields of modeling and measurements of rheological properties and behavior of materials under processing and applications; Change information between the theoretical and applied sciences as well as technical and technological implantations. Promote the communication and collaboration between the scientists, researchers and engineers of different disciplines, different nations, countries and continents. The international conference ic-rmm2 and symposiums of is-pim1 and is-rfs1 provide a platform among the leading international scientists, researchers, PhD students and engineers for discussing recent achievements in measurement, modeling and application of rheology in materials technology and materials science of liquids, melts, solids, crystals and amorphous structures. Among thr major fields of interest are the influence of materials structures, mechanical stresses, temperatures, deformation speeds and shear rates on rheological and physical properties, phase transformation of foams, foods, polymers, plastics and other competitive materials like ceramics, nanomaterials, medical- and biomaterials, cosmetics, coatings, light metals, alloys, glasses, films, composites, hetero-modulus, hetero-viscous, hetero-plastic complex materials, petrochemicals and hybrid materials. Multidisciplinary applications of rheology and rheological modeling in material science and technology encountered in sectors like alloys, ceramics, glasses, thin films, polymers, clays, construction materials, energy, aerospace, automotive and marine industry. Rheology in food, chemistry, medicine, biosciences and environmental sciences are of particular interests. In accordance to the program of the conference ic-rmm2 and symposiums is-pim1 and isrfs1 we have received more than 250 inquires and registrations from different organizations. Finally more than 240 abstracts were accepted for presentation. From them 12 were PLENARY lectures and 112 ORAL presentation. Researchers from 41 countries of Asia, Europe, Africa, North and South America arrived to Miskolc-Lillafüred (Hungary) and participated in the events of the conference. Including co-authors, the research work of more than 700 scientists were presented in the SESSIONS and SYMPOSIUMS of ic-rmm2 conference. Prof. Dr. László A. Gömze chair, ic-rmm2

AMSAHTS 1990: Advances in Materials Science and Applications of High Temperature Superconductors

NASA Technical Reports Server (NTRS)

Bennett, Larry H. (Editor); Flom, Yury (Editor); Moorjani, Kishin (Editor)

1991-01-01

This publication is comprised of abstracts for oral and poster presentations scheduled for AMSAHTS '90. The conference focused on understanding high temperature superconductivity with special emphasis on materials issues and applications. AMSAHTS 90, highlighted the state of the art in fundamental understanding of the nature of high-Tc superconductivity (HTSC) as well as the chemistry, structure, properties, processing and stability of HTSC oxides. As a special feature of the conference, space applications of HTSC were discussed by NASA and Navy specialists.

PREFACE: International Symposium on Materials Science and Innovation for Sustainable Society - Eco-Materials and Eco-Innovation for Global Sustainability - The 21st Iketani Conference 2011

NASA Astrophysics Data System (ADS)

Takahashi, Yasuo

2012-08-01

Conference logo The 21st century has been called the century of environmental revolution. Green innovations and environmentally friendly production systems based on physics, chemistry, materials science, and electronic engineering will be indispensable for ensuring renewable energy and establishing a sustainable society. In particular, production design, materials processing, and fabrication technologies such as welding and joining will be very important components of such green innovations. For these reasons, the International Symposium on Materials Science and Innovation for Sustainable Society - eco-materials and eco-innovation for global sustainability - (ECO-MATES 2011) was organized by the Joining and Welding Research Institute (JWRI) and the Center of Environmental Innovation Design for Sustainability (CEIDS), Osaka University. ECO-MATES 2011 was held at Hotel Hankyu Expo Park, Osaka, Japan from 28-30 November 2011. 435 participants from 20 countries around the world attended the symposium. 149 oral presentations including 60 invited talks and 160 posters were presented at the symposium to discuss the latest research and developments in green innovations in relation to environmental issues. The topics of the symposium covered all environmentally related fields including renewable energy, energy-materials, environment and resources, waste and biomass, power electronics, semiconductor, rare-earth metals, functional materials, organic electronics materials, electronics packaging, smart processing, joining and welding, eco-efficient processes, and green applied physics and chemistry. Therefore, 55 full papers concerning green innovations and environmentally benign production were selected and approved by the editorial board and the program committee of ECO-MATES 2011. All papers were accepted through peer review processes. I believe that all the papers have many informative contents. On behalf of the steering committee of the symposium, I would like to express my sincere appreciation to all the committees and secretariats, authors, participants of ECO-MATES 2011, and everybody involved in the publication of this special issue. It is a great honor for me that the special issue of Journal of Physics: Conference Series will contribute to establishing green innovations and a sustainable society. Chairman's signature Yasuo Takahashi Chairman of ECO-MATES 2011 Conference photograph ECO-MATES 2011 November 28-30, 2011 Venue: Hotel Hankyu Expo Park, Osaka, Japan The PDF also contains a list of the organizing committees.

Report of the First Annual Conference of the Western Educational Society for Telecommunications.

ERIC Educational Resources Information Center

Elliott, Richard B., Comp.

The material in this report consists of transcriptions of audiotapes of the general session speeches and the reports of the concurrent sessions of this conference. The topics of the six general session speeches were: the responsibility of the educational communicator in the political process, commercial television programing for children,…

The First NASA Advanced Composites Technology Conference, part 1

NASA Technical Reports Server (NTRS)

Davis, John G., Jr. (Compiler); Bohon, Herman L. (Compiler)

1991-01-01

Papers are presented from the conference. The ACT program is a multiyear research initiative to achieve a national goal of technology readiness before the end of the decade. Conference papers recorded results of research in the ACT program on new materials development and processing, innovative design concepts, analysis development and validation, cost effective manufacturing methodology, and cost tracking and prediction procedures. Papers presented on major applications programs approved by the Department of Defense are also included.

Industry technology assessment of graphite-polymide composite materials. [conferences

NASA Technical Reports Server (NTRS)

1975-01-01

An assessment of the current state of the art and the future prospects for graphite polyimide composite material technology is presented. Presentations and discussions given at a minisymposium of major issues on the present and future use, availability, processing, manufacturing, and testing of graphite polyimide composite materials are summarized.

Monitoring the Implementation of IDEA: Proceedings of the National Monitoring Conference (6th, Salt Lake City, Utah, October 2002).

ERIC Educational Resources Information Center

Tschantz, Jennifer

This document presents the proceedings of the sixth National Monitoring Conference concerned with implementation of the Individuals with Disabilities Education Act. Introductory material describes the purpose and background of the document and the federal monitoring of states, including the Continuous Improvement Monitoring Process (CIMP) and…

7 CFR 1.640 - What are the requirements for prehearing conferences?

Code of Federal Regulations, 2010 CFR

2010-01-01

... and the schedule of remaining steps in the hearing process. (e) Failure to attend. Unless the ALJ... prehearing conference with the parties at the time specified in the docketing notice under § 1.630, on or... exclude issues that do not qualify for review as factual, material, and disputed; (ii) To consider the...

AMSAHTS 1990: Advances in Materials Science and Applications of High Temperature Superconductors

NASA Technical Reports Server (NTRS)

Flom, Yury (Editor)

1990-01-01

This publication is comprised of abstracts for oral and poster presentations scheduled for AMSAHTS '90. The conference will focus on understanding high-temperature superconductivity with special emphases on materials issues and applications. AMSAHTS '90, will highlight the state of the art in fundamental understanding of the nature of high-Tc superconductivity (HTSC) as well as the chemistry, structure, properties, processing and stability of HTSC oxides. As a special feature of the conference, space applications of HTSC will be discussed by NASA and Navy specialists.

Manufacturing Methods and Technology (MANTECH) Program. Quality Control and Nondestructive Evaluation Techniques for Composites. Part VI. Acoustic Emission - A State-of-the-Art Review.

DTIC Science & Technology

1983-05-01

SALPE Technical Conference Series, Volume 4. Society for the Advancement of Material and Process Engineering, Azusa, California. 1972. conference held...dispersion of the stress waves, and scattering from "obstacles" encountered in the line of travel of the wave. Geometric spreading is the loss in signal...amplitude due to the fact that, as the wave travels away from the point AE source in a two- I or three-dimensional medium, the total area of material

Proceedings ICASS 2017

NASA Astrophysics Data System (ADS)

Fu, Qiang; Schaaf, Peter

2018-07-01

This special issue of the high impact international peer reviewed journal Applied Surface Science represents the proceedings of the 2nd International Conference on Applied Surface Science ICASS held 12-16 June 2017 in Dalian China. The conference provided a forum for researchers in all areas of applied surface science to present their work. The main topics of the conference are in line with the most popular areas of research reported in Applied Surface Science. Thus, this issue includes current research on the role and use of surfaces in chemical and physical processes, related to catalysis, electrochemistry, surface engineering and functionalization, biointerfaces, semiconductors, 2D-layered materials, surface nanotechnology, energy, new/functional materials and nanotechnology. Also the various techniques and characterization methods will be discussed. Hence, scientific research on the atomic and molecular level of material properties investigated with specific surface analytical techniques and/or computational methods is essential for any further progress in these fields.

PREFACE 2nd International Conference on Materials Physics and Applications (JIPMA 2009/MATERIAUX 2009)

NASA Astrophysics Data System (ADS)

Cheikhrouhou, Abdelwaheb

2010-11-01

The 'Tunisian Materials Research Society: Tu-MRS' organized the International Days on Materials Physics and Applications 'JIPMA 2009' and the National Conference on Materials 'MATERIAUX 2009' in Gafsa (Tunisia) During the period 20-24 December 2009. The first International Days on Materials Physics and Applications 'JIPMA 2007' were organized in Annaba (Algeria) in November 2007 while the first National Conference on Materials 'MATERIAUX 2006' was organized in Douz (Tunisia) in December 2006. The 'JIPMA' conference series together with the 'MATERIAUX' intend to provide an excellent opportunity for international, Maghreb and Tunisian researchers to make their own works on materials known to a wider audience and to have discussions with other participants. This conference will also be an opportunity to exchange experiences, create and consolidate cooperation between different research structures in the Maghreb countries. This conference will equally promote research development, contribute to collaboration between universities and the socio-economical milieu. More than 300 senior researchers, Professors, PhD and Master students attended this conference from Tunisia, Algeria, Morocco, France, and Spain. Several researchers, engineers and managers from industrial firms also attended this scientific meeting. The conference consists of plenary and semi-plenary talks, oral contributions and poster presentations. The topics of the conference are: Nano-materials, nano-systems, thin films, surfaces and interfaces Multifonctional Materials, Magnetic Materials, Dielectric Materials, Superconducting Materials, Applications, ... Materials for Electronics, Informatics and Communications (Semi-conducting Materials, Electronic devices, Spintronic, ... Optoelectronic Materials, Sensors Ceramics, Glasses, Polymers, ... Natural Materials: Phosphates, Clay, ... Metallic Materials, alloys, ... Materials and Environment Materials and Energy Biomaterials Elaborating Methods and Characterization Techniques I want to thank the organizing committee and everyone else who participated in the organization of this meeting for their invaluable efforts to guarantee the full success of this conference. I want also to thank very warmly all the Scientific committee and all other reviewers for their hard work reviewing the submitted papers. Professor Abdelwaheb CHEIKHROUHOU Chairman of the Conference

20th International Conference for Students and Young Scientists: Modern Techniques and Technologies (MTT'2014)

NASA Astrophysics Data System (ADS)

2014-10-01

The active involvement of young researchers in scientific processes and the acquisition of scientific experience by gifted youth currently have a great value for the development of science. One of the research activities of National Research Tomsk Polytechnic University, aimed at the preparing and formation of the next generation of scientists, is the International Conference of Students and Young Scientists ''Modern Techniques and Technologies'', which was held in 2014 for the twentieth time. Great experience in the organization of scientific events has been acquired through years of carrying the conference. There are all the necessary resources for this: a team of organizers - employees of Tomsk Polytechnic University, premises provided with modern office equipment and equipment for demonstration, and leading scientists - professors of TPU, as well as the status of the university as a leading research university in Russia. This way the conference is able to attract world leading scientists for the collaboration. For the previous years the conference proved itself as a major scientific event at international level, which attracts more than 600 students and young scientists from Russia, CIS and other countries. The conference provides oral plenary and section reports. The conference is organized around lectures, where leading Russian and foreign scientists deliver plenary presentations to young audiences. An important indicator of this scientific event is the magnitude of the coverage of scientific fields: energy, heat and power, instrument making, engineering, systems and devices for medical purposes, electromechanics, material science, computer science and control in technical systems, nanotechnologies and nanomaterials, physical methods in science and technology, control and quality management, design and technology of artistic materials processing. The main issues considered by young researchers at the conference were related to the analysis of contemporary problems using new techniques and application of new technologies.

PREFACE: International Conference on Functional Materials and Nanotechnologies 2013 (FM&NT2013)

NASA Astrophysics Data System (ADS)

Nõmmiste, Ergo; Kirm, Marco; Plank, Toomas

2013-12-01

The International Conference Functional Materials and Nanotechnologies (FM&NT - 2013) was held in Tartu, 21-24 April 2013 at the Dorpat Conference Centre. The conference was organised by Institute of Physics, University of Tartu. The FM&NT conference series was started in 2006 by scientists from the Institute of Solid State Physics, University of Latvia. It is an annual conference bringing together researchers from the whole world. The warm and open atmosphere of this scientific conference has turned it into event where people from different fields meet under the common name of functional materials and nanotechnology. It is particularly important for early stage scientists who are looking for new knowledge and contact with people from various fields. Our Latvian colleagues with their success in internationalization made us neighbouring Estonians so envious that we could not withstand proposing that we host the conference in every second year in Estonia. Actually this is in a way the continuation of the idea of the famous Baltic seminars which took place over several decades during the last century. Due to political constraints these seminars were only opened to scientist of the former Eastern European countries, but which were extremely popular and attracted attendees from over the whole Soviet Union. Much fruitful cooperation started from the initial personal contacts of scientists at these seminars held twice per year, once in Latvia and the second time in Estonia. At the last FM&NT 2012 conference, the decision was made that Institute of Physics, University of Tartu would organise the event in Tartu in 2013. Along with traditional topics such as multifunctional materials, nanomaterials, materials for sustainable energy applications and theory, this conference focused on studies using synchrotron radiation and other novel light sources. The number of registered participants from 21 countries was nearly 300. During the three days of the conference 14 invited, 45 oral, and 5 commercial talks were delivered and more than 200 posters were presented. In the framework of conference more than 20 papers were submitted to a topical issue of Physica Scripta. Based on the work presented at the conference, 62 articles are included in this volume of IOP Conference Series: Materials Science and Engineering. Additional information about FM&NT-2013 is available at its homepage http://fmnt.ut.ee/. The Organizing Committee would like to thank all the speakers, contributors, session chairs, referees and other involved staff for their efforts in making FM&NT-2013 successful. Special thanks for their hard work dealing with the conference papers goes to the Guest Editors: Professor Mikhail Brik, Dr Svetlana Zazubovits, Dr Arvo Kikas, Dr Rainer Pärna. The Organizing Committee hopes that Conference gave participants good insight into recent developments in nanotechnology, sustainable energetics, processing and modelling of multifunctional materials and research done using synchrotron radiation or other novel light sources. We sincerely hope that conference has provided support for the sharing of information and has brought together many young and experienced scientists from different fields, leading to fruitful discussions. We hope that all participants had good and memorable time in Tartu. On the behalf of organising committee Professor Ergo Nõmmiste Dr Marco Kirm Dr Toomas Plank The PDF also contains lists of the committees, the conference photograph and the sponsor's logos.

International SAMPE Symposium and Exhibition, 35th, Anaheim, CA, Apr. 2-5, 1990, Proceedings. Books 1 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Janicki, G.; Bailey, V.; Schjelderup, H.

The present conference discusses topics in the fields of ultralightweight structures, producibility of thermoplastic composites, innovation in sandwich structures, composite failure processes, toughened materials, metal-matrix composites, advanced materials for future naval systems, thermoplastic polymers, automated composites manufacturers, advanced adhesives, emerging processes for aerospace component fabrication, and modified resin systems. Also discussed are matrix behavior for damage tolerance, composite materials repair, testing for damage tolerance, composite strength analyses, materials workplace health and safety, cost-conscious composites, bismaleimide systems, and issues facing advanced composite materials suppliers.

Ideas for Planning Your Instructional Materials Center. Administration; Conference and Independent Study; Listening and Viewing; Materials Production; Reading, Research and Borrowing; Storage and Maintenance.

ERIC Educational Resources Information Center

Massachusetts School Building Assistance Commission, Boston.

This report suggests that the instructional materials center be flexible for multigroup activities, expansible for future physical growth, and central to the instructional program. Area specifications are given for the following areas: materials research, small groups, cataloging and processing materials, and listening and speaking, and for a dark…

Strategic Research to Enable NASA's Exploration Missions Conference

NASA Technical Reports Server (NTRS)

Nahra, Henry (Compiler)

2004-01-01

Abstracts are presented from a conference sponsored by the NASA Office of Biological and Physical Research and hosted by NASA Glenn Research Center and the National Center for Microgravity Research on Fluids and Combustion, held in Cleveland, Ohio, June 22-23, 2004. Topics pertained to the behavior of processes and materials in microgravity as well as physiological-biological studies and microgravity effects.

Imagery and Visual Literacy: Selected Readings from the Annual Conference of the International Visual Literacy Association (26th, Tempe, Arizona, October 12-16, 1994).

ERIC Educational Resources Information Center

Beauchamp, Darrell G.; And Others

This document contains selected conference papers all relating to visual literacy. The topics include: process issues in visual literacy; interpreting visual statements; what teachers need to know; multimedia presentations; distance education materials for correctional use; visual culture; audio-visual interaction in desktop multimedia; the…

Analytical Ultrasonics in Materials Research and Testing

NASA Technical Reports Server (NTRS)

Vary, A.

1986-01-01

Research results in analytical ultrasonics for characterizing structural materials from metals and ceramics to composites are presented. General topics covered by the conference included: status and advances in analytical ultrasonics for characterizing material microstructures and mechanical properties; status and prospects for ultrasonic measurements of microdamage, degradation, and underlying morphological factors; status and problems in precision measurements of frequency-dependent velocity and attenuation for materials analysis; procedures and requirements for automated, digital signal acquisition, processing, analysis, and interpretation; incentives for analytical ultrasonics in materials research and materials processing, testing, and inspection; and examples of progress in ultrasonics for interrelating microstructure, mechanical properites, and dynamic response.

Second Aerospace Environmental Technology Conference

NASA Technical Reports Server (NTRS)

Whitaker, A. F. (Editor); Clark-Ingram, M. (Editor)

1997-01-01

The mandated elimination of CFC'S, Halons, TCA, and other ozone depleting chemicals and specific hazardous materials has required changes and new developments in aerospace materials and processes. The aerospace industry has been involved for several years in providing product substitutions, redesigning entire production processes, and developing new materials that minimize or eliminate damage to the environment. These activities emphasize replacement cleaning solvents and their application, verification, compliant coatings including corrosion protection system and removal techniques, chemical propulsion effects on the environment, and the initiation of modifications to relevant processing and manufacturing specifications and standards.

Second Aerospace Environmental Technology Conference

NASA Technical Reports Server (NTRS)

Whitaker, A. F.; Clark-Ingram, M.; Hessler, S. L.

1997-01-01

The mandated elimination of CFC's, Halons, TCA, and other ozone depleting chemicals and specific hazardous materials has required changes and new developments in aerospace materials and processes. The aerospace industry has been involved for several years in providing product substitutions, redesigning entire production processes, and developing new materials that minimize or eliminate damage to the environment. These activities emphasize replacement cleaning solvents and their application verifications, compliant coatings including corrosion protection systems, and removal techniques, chemical propulsion effects on the environment, and the initiation of modifications to relevant processing and manufacturing specifications and standards.

9th Annual Science and Engineering Technology Conference

DTIC Science & Technology

2008-04-17

Disks Composite Technology Titanium Aluminides Processing Microstructure Properties Curve Generator Go-Forward: Integrated Materials & Process Models...Initiatives Current DPA/T3s: Atomic Layer Deposition Hermetic Coatings: ...domestic ALD for electronic components; transition to fabrication process ...Production windows estim • Process capability fully established >Production specifications in place >Supply chain established •All necessary property

EDITORIAL: Special cluster on Dielectrics for Emerging Technologies

NASA Astrophysics Data System (ADS)

Clarke, R.; Youngs, I.; Stevens, G.

2004-02-01

The 2003 Conference on Dielectrics for Emerging Technologies was organised by the Institute of Physics Dielectrics Group as one of the participating conferences at the IOP Physics Congress held at Heriot-Watt University between 23 and 27 March 2003. This was the second annual conference of the new Dielectrics Group, which was formed from the former Dielectrics Society in October 2001. The conference policy remains unchanged, with the Group adopting an interdisciplinary and broadband approach to studies of the interaction of electromagnetic fields with materials. This policy is well exemplified by the papers that were delivered at this conference. The aims of the conference were three-fold: to provide a forum for the presentation of leading-edge research on emerging electromagnetic materials, to present developments on the use of dielectrics in emerging technologies and to broaden the debate on metamaterials in the UK, especially in relation to their potential applications. The metamaterials of interest here are macro- or meso-scopically structured materials that offer novel modes of electromagnetic field interaction, thereby widening the range of effective dielectric properties available to us for novel technological applications. They include `negative refractive index materials', `left handed materials', `photonic' or `electromagnetic band-gap materials' and actively-controlled or `smart' electromagnetic materials. Significant metamaterial applications are anticipated in the development of `perfect' lenses, filters, wavefront-conditioning layers and in improved metrology. The conference focussed additionally on dielectrics in support of electronics, photonics and optics, nano-materials, composites and structures, and the development of tuneable dielectrics and resonators for future applications in telecommunications. We are pleased to report that the conference was successful in achieving its objectives, thirty-four oral papers were delivered and twenty-three poster papers presented, many of which provoked significant debate. All contributions and the vigorous discussions held in this predominantly international forum testify to the health and vigour of this branch of materials physics and engineering. We were particularly pleased on this occasion to have the opportunity to run joint conference sessions with the `Structured Optical Materials' and `Electrostatics' conferences, which were run in parallel at the Congress. Electromagnetic materials science is inherently a cross-spectrum discipline and these sessions demonstrated the considerable overlap of technical interests and research from DC to optical frequencies. We are delighted to have the privilege of presenting eleven of the papers from the conference in this special cluster of Journal of Physics D: Applied Physics. Between them they capture the wide range of topics that were covered at the conference. The field of dielectric materials characterisation was well represented and amongst many other topics it included the study of nano-composites, represented here by the papers of Pelster et al and Hussain et al. Composite dielectrics at all scales lie at the centre of most new research into emerging applications and the paper by Bowler and that of Tuncer are also concerned with the understanding and characterisation of such materials. The understanding of the nature and distribution of space charge has always been a core dielectric study and a contribution to this field is made here by the paper of Marat-Mendes et al. Processing is a major factor that governs the properties of all dielectric materials---but this is particularly true in the case of sintered low-loss ceramics. The paper of Pullar et al adds to our knowledge in this important area. The remit of the conference led to the discussion of a very wide range of potential applications. One such is the use of dielectrophoretic forces for separating particles in suspensions (e.g. in pharmaceutical and diagnostic applications). The paper by Flores-Rodriguez and Markz presents a study on one aspect of this discipline. Presentations on meta- and structured materials at the conference are represented here in two papers: those of Shamonina and Solymar and of Zhou, Chan and Sheng, while a study in the closely allied area of band-gap materials is presented in the paper by Schuster and Klein. The final paper from the conference in this special cluster is concerned with an end-use application: the use of tuneable dielectric resonators in base-stations for future mobile telecoms networks. The paper by Krupka et al describes a magnetic approach to such tuning. In the longer term we sincerely hope that both the conference and these papers will prove to have made a significant contribution to the development and uses of dielectrics, and their metamaterial derivatives, in advanced technological applications. It is noteworthy that as a result of the success of this conference, the 2004 annual conference will be on the subject of `Dielectrics at Meso- and Nano-Scales'. We would like to take this opportunity to express our sincere thanks to all who participated in the conference for their contributions and we would like to express our particular thanks to the authors of the papers in this special cluster of Journal of Physics D: Applied Physics.

Dual-Use Space Technology Transfer Conference and Exhibition. Volume 2

NASA Technical Reports Server (NTRS)

Krishen, Kumar (Compiler)

1994-01-01

This is the second volume of papers presented at the Dual-Use Space Technology Transfer Conference and Exhibition held at the Johnson Space Center February 1-3, 1994. Possible technology transfers covered during the conference were in the areas of information access; innovative microwave and optical applications; materials and structures; marketing and barriers; intelligent systems; human factors and habitation; communications and data systems; business process and technology transfer; software engineering; biotechnology and advanced bioinstrumentation; communications signal processing and analysis; medical care; applications derived from control center data systems; human performance evaluation; technology transfer methods; mathematics, modeling, and simulation; propulsion; software analysis and decision tools; systems/processes in human support technology; networks, control centers, and distributed systems; power; rapid development; perception and vision technologies; integrated vehicle health management; automation technologies; advanced avionics; and robotics technologies.

Proceedings: pellet fuels conference

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1995-12-31

The conference brought together professionals from the process- engineered-fuels (PEF), utility, paper, plastics, and boiler industries. Although the last two decades have produced technical breakthroughs, efforts to advance PEF must now focus on increasing commercial breakthroughs. Successful commercialization will depend on increasing supplier, consumer, and regulator confidence and support by demonstrating the performance and value of PEF products. Speakers provided updates on how PEF technology is evolving with respect to technical, economic, and regulatory challenges. Actions critical toward full commercialization of PEF were then considered. Discussion groups addressed materials sourcing, fuel processing and transportation, combustion, and ash handling.

1984 European Conference on Optics, Optical Systems and Applications, Amsterdam, Netherlands, October 9-12, 1984, Proceedings

NASA Astrophysics Data System (ADS)

Boelger, B.; Ferwerda, H. A.

Various papers on optics, optical systems, and their applications are presented. The general topics addressed include: laser systems, optical and electrooptical materials and devices; novel spectroscopic techniques and applications; inspection, remote sensing, velocimetry, and gauging; optical design and image formation; holography, image processing, and storage; and integrated and fiber optics. Also discussed are: nonlinear optics; nonlinear photorefractive materials; scattering and diffractions applications in materials processing, deposition, and machining; medical and biological applications; and focus on industry.

Space manufacturing facilities: Space colonies; Proceedings of the Princeton Conference, Princeton University, Princeton, N.J., May 7-9, 1975

NASA Technical Reports Server (NTRS)

Grey, J.

1977-01-01

Reports submitted to the conference encompass: administration and law relating to inhabited space facilities and colonies; space manufacturing and processing; organization and construction of space habitats and management of space colony farms; winning and acquisition of lunar and asteroidal materials for sustaining autonomous space colonies. Attention is given to trajectories between earth, low earth orbit, earth-moon libration points (specifically L5), circumlunar parking orbits, and trajectories in translunar space; effects of low gravity and zero gravity on human physiology and on materials processing; architecture and landscaping for space colonies; closed ecosystems of space colonies. Varieties of human cultures and value hierarchies around the earth are examined for broader perspectives on the social organization of space colonies.

Message from the Conference Chairs

NASA Astrophysics Data System (ADS)

Krishna, Sanjay; Perera, Unil

2015-05-01

We were very excited to host the 8th International Workshop on Quantum Structure Infrared Photodetectors (QSIP 2014), in picturesque Santa Fe, New Mexico from June 29th-July 3rd, 2014. This followed successful QSIP conferences at Dana Point (2000), Torino (2002), Kananaskis (2004), Kandy (2006), Yosimite (2009), Istanbul (2010) and Corsica (2012). The QSIP workshop is a high level scientific conference that aims to bring together scientists, engineers, industrial organizations, students and users in order to discuss recent advances, and to share the "State of the Art" in this field. QSIP conferences provide an international forum for attendees to present and discuss progress in infrared device physics and modeling, materials growth and processing issues, focal plane array development and characterization.

Technology 2001: The Second National Technology Transfer Conference and Exposition, volume 2

NASA Technical Reports Server (NTRS)

1991-01-01

Proceedings of the workshop are presented. The mission of the conference was to transfer advanced technologies developed by the Federal government, its contractors, and other high-tech organizations to U.S. industries for their use in developing new or improved products and processes. Volume two presents papers on the following topics: materials science, robotics, test and measurement, advanced manufacturing, artificial intelligence, biotechnology, electronics, and software engineering.

76 FR 69324 - Office of Hazardous Materials Safety; Notice of Delays in Processing of Special Permits Applications

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-08

..., TX. 8826-M Phoenix Air 4 03-31-2012 Group, Inc., Cartersville, GA. 12561-M Rhodia, Inc., 4 03-31-2012... Clark Air, 4 03-31-2012 Inc., Port Alsworth, AK. 10656-M Conference of 4 03-31-2012 Radiation Control... Conference of 4 03-31-2012 Radiation Control, Program Directors, Inc., Frankfort, KY. 10898-M Hydac 3 03-31...

PREFACE: 13th High-Tech Plasma Processes Conference (HTPP-2014)

NASA Astrophysics Data System (ADS)

2014-11-01

The High-Tech Plasma Processes - 13th European Plasma Conference (HTPP-2014) was held in Toulouse (France) on 22-27 June 2014. The conference series started in 1990 as a thermal plasma conference and has gradually expanded to include other related topics. Now the High-Tech Plasma Processes - European Plasma Conference (HTPP) is an international conference organised in Europe every two years with topics encompassing the whole field of plasma processing science. The aim of the conference is to bring different scientific communities together, to facilitate contacts between science, technology and industry and to provide a platform for the exploration of both the fundamental topics and new applications of plasmas. For this edition of HTPP, as was the case for the last, we have acheived a well balanced participation from the communities of both thermal and non-thermal plasma researchers. 142 people from 17 countries attended the conference with the total number of contributions being 155, consisting of 8 plenary and 8 invited talks plus 51 oral and 88 poster contributions. We have received numerous papers corresponding to the contributions of HTPP-2014 that have been submitted for publication in this volume of Journal of Physics: Conference Series. Each submitted contribution has been peer reviewed (60 referees with at least two reviewing each paper) and the Editors are very grateful to the referees for their careful support in improving the original manuscripts. In total, 52 manuscripts have been accepted for publication covering a range of topics of plasma processing science from plasma fundamentals to process applications through to experiments, diagnostics and modelling. We have grouped the papers into the following 5 topics: - Arc-Materials Interaction and Metallurgy - Plasma Torches and Spraying - Synthesis of Powders and Nanomaterials - Deposition and Surface Treatment - Non-Equilibrium Plasmas We deeply thank the authors for their enthusiastic and high-grade contributions and we are convinced that this volume of Journal of Physics: Conference Series will be interesting for our community. Finally, we would like to thank the conference chairmen, the members of the steering committee, the international scientific committee, the local organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of HTPP-2014. The Editors of the HTPP-2014 Proceedings Dr Alain Gleizes, chairman of HTPP-2014 Prof. Jochen Schein, head of the ISC Prof. Philippe Teulet Toulouse, 14th October 2014

Preface

NASA Astrophysics Data System (ADS)

Lexcellent, C.; Patoor, E.

2004-06-01

This international conference was held between the 18 and the 23th may 2003, in the "Villa Clythia" belonging to the CAES of the french "Comité National de la Recherche Scientifique CNRS" at Fréjus (France). The scope of this EMMC7 conference was about the use of smart materials which permits the conception of some adaptive systems for industrial applications. A special attention was devoted to active and passive controls of damping in structures. The use of this new class of materials (shape memory alloys, piezoelectric ceramics, TRIP steels, ferromagnetic shape memory alloys, ...) implies the development of numerical tools for computer assisted design process. Complexity of the involved material behaviour requires a deep understanding of strain mechanisms (martensitic phase transformation, reorientation process of domains), the use of accurate experimental techniques and advanced modelling approaches at various scale (micro, meso, macroscopic). In this purpose, it is necessary to use some coupled calculations connecting different fields of physics such as thermal, electromagnetism, electricity and mechanics of materials ones. The conference topic gave the opportunity of fruitful discussions between the mechanics of materials communauty and the specialists of damping or passive control. The scientific program contains nine oral sessions and one poster session. - Experimental characterization of the shape memory alloys thermomechanical behavior (two sessions) - Modeling of the shape memory alloy thermomechanical behavior (two sessions) - Ferromagnetic shape memory alloys behavior (one session) - Piezoelectric ceramics behavior (one session) - Transformation induced plasticity steel behavior (one session) - Hybrid structures including smart materials as sensor or actuator (one session) - Adaptive structure for vibration control (one session) - Poster session. The conference programm contains 50 lectures. 57 scientists were present and come from 14 different countries: 20 from France, 7 from Germany, 6 from Italy, 4 from Russia, 4 from Finland and 5 from USA ... This scientific programm allows all the participants interesting exchanges on "the state of art" about smart materials and adaptive systems. In the aim of its publication in the Proceedings of the EMMC7 Conference (EDP Sciences "Journal de Physique IV") each paper was expertised by two reviewers belonging to the International Scientific Committee and also other specialists. On that occasion, we will thank them for their very important contribution of the scientific level quality of the Proceedings. We will also thank: the sponsors of the Conference: Délégation Générale aux Armements (DGA), le Ministère de la Recherche, l'Université de Metz, l'ENSAM, le CNRS, l'Association Française de Mécanique et l'Institut des Microtechniques de Franche-Comté, the members of the organizing committee, the MECAMAT committee for trusting us, EDP Sciences for the Proceedings, The "Villa Clythia" team for his nice help in the material organization, ... and all the participants. The Co-chairmen Christian LEXCELLENT et Étienne PATOOR

PREFACE AND CONFERENCE INFORMATION: Eighth International Conference on Laser Ablation

NASA Astrophysics Data System (ADS)

Hess, Wayne P.; Herman, Peter R.; Bäuerle, Dieter; Koinuma, Hideomi

2007-04-01

Laser ablation encompasses a wide range of delicate to extreme light interactions with matter that present considerably challenging problems for scientists to study and understand. At the same time, laser ablation also represents a basic process of significant commercial importance in laser material processing—defining a multi-billion dollar industry today. These topics were widely addressed at the 8th International Conference on Laser Ablation (COLA), held in Banff, Canada on 11-16 September 2005. The meeting took place amongst the majestic and natural beauty of the Canadian Rocky Mountains at The Banff Centre, where delegates enjoyed many inspiring presentations and discussions in a unique campus learning environment. The conference brought together world leading scientists, students and industry representatives to examine the basic science of laser ablation and improve our understanding of the many physical, chemical and/or biological processes driven by the laser. The multi-disciplinary research presented at the meeting underlies some of our most important trends at the forefront of science and technology today that are represented in the papers collected in this volume. Here you will find new processes that are producing novel types of nanostructures and nano-materials with unusual and promising properties. Laser processes are described for delicately manipulating living cells or modifying their internal structure with unprecedented degrees of control and precision. Learn about short-pulse lasers that are driving extreme physical processes on record-fast time scales and opening new directions from material processing applications. The conference papers further highlight forefront application areas in pulsed laser deposition, nanoscience, analytical methods, materials, and microprocessing applications. Laser ablation continues to grow and evolve, touching forefront areas in science and driving new technological trends in laser processing applications. Please enjoy the collection of papers in this proceeding. Also, please join us for COLA 2007, to be held in the Canary Islands, Spain (http://www.io.csic.es/cola07/index.php). Conference on Laser Ablation (COLA'05) September 11-16, 2005 Banff, Canada Supported by University of Toronto, Canada (UT) Pacific Northwest National Laboratory (PNNL) Sponsors Sponsorship from the following companies is gratefully acknowledged and appreciated AMBP Tech Corporation GSI Lumonics Amplitude Systèmes IMRA America, Inc. Andor Technologies Journal of Physics D: Applied Physics North Canadian Institute for Photonic Innovations LUMERA LASER GmbH Clark-MXR, Inc. Pascal Coherent, Lamdbda Physik, TuiLaser PVD Products, Inc. Continuum Staib Instruments, Inc. Cyber Laser Inc. Surface GAM LASER, Inc. International Steering Committee C. Afonso (Spain)W. Husinsky (Austria) D. Bäuerle (Austria)W. Kautek (Germany) I.W. Boyd (UK) H. Koinuma (Japan) E.B. Campbell (Sweden) H.U. Krebs (Germany) J.T. Dickinson (USA) D.H. Lowndes (USA) M. Dinescu (Romania) J.G. Lunney (Ireland) J.J. Dubowski (Canada) W. Marine (France) E. Fogarassy (France) K. Murakami (Japan) C. Fotakis (Greece) T. Okada (Japan) D. Geohegan (USA) R.E. Russo (USA) M. Gower (UK) J. Schou (Denmark) R.H. Haglund Jr. (USA) M. Stuke (Germany) R.R. Herman (Canada) K. Sugioka (Japan) W.P. Hess (USA) F. Traeger (Germany) J.S Horwitz (USA) A. Yabe (Japan) Local Organizing Committee Nikki Avery Pacific Northwest National Laboratory Ken Beck Pacific Northwest National Laboratory Jan J. Dubowski University of Alberta Robert Fedosejevs Université de Sherbrooke Alan Joly Pacific Northwest National Laboratory Michel Meunier École Polytechnique de Montréal Suwas Nikumb National Research Council Canada Ying Tsui University of Alberta Conference photograph.

Dual-Use Space Technology Transfer Conference and Exhibition. Volume 1

NASA Technical Reports Server (NTRS)

Krishen, Kumar (Compiler)

1994-01-01

This document contains papers presented at the Dual-Use Space Technology Transfer Conference and Exhibition held at the Johnson Space Center February 1-3, 1994. Possible technology transfers covered during the conference were in the areas of information access; innovative microwave and optical applications; materials and structures; marketing and barriers; intelligent systems; human factors and habitation; communications and data systems; business process and technology transfer; software engineering; biotechnology and advanced bioinstrumentation; communications signal processing and analysis; new ways of doing business; medical care; applications derived from control center data systems; human performance evaluation; technology transfer methods; mathematics, modeling, and simulation; propulsion; software analysis and decision tools systems/processes in human support technology; networks, control centers, and distributed systems; power; rapid development perception and vision technologies; integrated vehicle health management; automation technologies; advanced avionics; ans robotics technologies. More than 77 papers, 20 presentations, and 20 exhibits covering various disciplines were presented b experts from NASA, universities, and industry.

FIBER-TEX 1991: The Fifth Conference on Advanced Engineering Fibers and Textile Structures for Composites

NASA Technical Reports Server (NTRS)

Buckley, John D. (Editor)

1992-01-01

This document is a compilation of papers presented at a joint NASA/North Carolina State University/DoD/Clemson University/Drexel University conference on Fibers, Textile Technology, and Composites Structures held at the College of Textiles Building on Centennial Campus of North Carolina State University, Raleigh, North Carolina on October 15-17, 1991. Conference papers presented information on advanced engineering fibers, textile processes and structures, structural fabric production, mechanics and characteristics of woven composites, pultruded composites, and the latest requirements for the use of textiles in the production of composite materials and structures.

PREFACE: 5th International Conference on Mechatronics (ICOM'13)

NASA Astrophysics Data System (ADS)

Akramin Shafie, Amir; Raisuddin Khan, Md

2013-12-01

The Fifth International Conference on Mechatronics (ICOM2013), took place in Kuala Lumpur Malaysia from 2-4 July 2013. The biannual conference which started in 2001 is regularly organized by Faculty of Engineering, International Islamic University Malaysia (IIUM) with the aims to serve as a platform for exchange of ideas on advances of in mechatronics and their applications as well as to foster research and worldwide collaboration. The theme for the 2013 conference was 'Mechatronics: Sustainable Development through Innovative Solutions'. The ICOM 2013 Conference consisted of Keynote Speeches (5) and oral contributions (150). The topics of the conference were: Mechatronic systems and Applications Intelligent Systems Control and Instrumentation Signal and Image Processing Machine Vision Robotics and Automation Manufacturing Mechatronics Green Mechatronics Mechatronic Education Smart Materials and Structures Active Vibration Control Computer and Information Technology MEMS and NEMS Biomechatronics and Rehabilitation Engineering Autonomous Systems Energy and Sustainability Transportation System It is our great pleasure to present this volume of IOP Conference Series: Materials Science and Engineering (MSE) to the scientific community to promote further research in these areas. We believe that this volume will be both an excellent source of scientific material in the fast evolving fields that were covered by ICOM 2013. We thank the authors for their enthusiastic and high-grade contributions. We would also like to express our gratitude to the Organizing Committee, the Institutions and Sponsors and everyone who contributed to this conference through their supports and invaluable efforts. Editors Amir A Shafie aashafie@iium.edu.my Raisuddin Khan raisuddin@iium.edu.my Mahbubur Rashid mahbub@iium.edu.my Department of Mechatronics, International Islamic University Malaysia (IIUM), Kuala Lumpur Malaysia Organizing Committee Md Raisuddin Khan Md Mozasser Rahman Shahrul Naim Sidek Muhammad Mahbubur Rashid Amir Akramin Shafie Nahrul Khair Alang Md Rasyid Rini Akmeliati Roslizar Mat Ali Hazlina Md Yusof Asan Gani Abdul Muthalif Wahju Sediono Salmiah Ahmad Iskandar Al-Thani Mahmood Yasir Mohd Mustafah Moinul Bhuiyan Zulkifli Zainal Abidin Nadzril Sulaiman Momoh J Salami Conference logos

IEEE Photovoltaic Specialists Conference, 20th, Las Vegas, NV, Sept. 26-30, 1988, Conference Record. Volumes 1 & 2

NASA Astrophysics Data System (ADS)

Various papers on photovoltaics are presented. The general topics considered include: amorphous materials and cells; amorphous silicon-based solar cells and modules; amorphous silicon-based materials and processes; amorphous materials characterization; amorphous silicon; high-efficiency single crystal solar cells; multijunction and heterojunction cells; high-efficiency III-V cells; modeling and characterization of high-efficiency cells; LIPS flight experience; space mission requirements and technology; advanced space solar cell technology; space environmental effects and modeling; space solar cell and array technology; terrestrial systems and array technology; terrestrial utility and stand-alone applications and testing; terrestrial concentrator and storage technology; terrestrial stand-alone systems applications; terrestrial systems test and evaluation; terrestrial flatplate and concentrator technology; use of polycrystalline materials; polycrystalline II-VI compound solar cells; analysis of and fabrication procedures for compound solar cells.

NASA Microgravity Materials Science Conference

NASA Technical Reports Server (NTRS)

Gillies, D. C. (Compiler); McCauley, D. E. (Compiler)

1999-01-01

The Microgravity Materials Science Conference was held July 14-16, 1998 at the Von Braun Center in Huntsville, AL. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division at NASA Headquarters, and hosted by the NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications. It was the third NASA conference of this type in the microgravity materials science discipline. The microgravity science program sponsored approximately 125 investigations and 100 principal investigators in FY98, almost all of whom made oral or poster presentations at this conference. The conference's purpose was to inform the materials science community of research opportunities in reduced gravity in preparation for a NASA Research Announcement scheduled for release in late 1998 by the Microgravity Research Division at NASA Headquarters. The conference was aimed at materials science researchers from academia, industry, and government. A tour of the Marshall Space Flight Center microgravity research facilities was held on July 16, 1998. This volume is comprised of the research reports submitted by the principal investigators after the conference.

NASA Microgravity Materials Science Conference

NASA Technical Reports Server (NTRS)

Szofran, Frank R. (Compiler); McCauley, D. (Compiler); Walker, C. (Compiler)

1996-01-01

The Microgravity Materials Science Conference was held June 10-11, 1996 at the Von Braun Civic Center in Huntsville, AL. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Science and Applications Division at NASA Headquarters, and hosted by the NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the second NASA conference of this type in the microgravity materials science discipline. The microgravity science program sponsored approximately 80 investigations and 69 principal investigators in FY96, all of whom made oral or poster presentations at this conference. The conference's purpose was to inform the materials science community of research opportunities in reduced gravity in preparation for a NASA Research Announcement (NRA) scheduled for release in late 1996 by the Microgravity Science and Applications Division at NASA Headquarters. The conference was aimed at materials science researchers from academia, industry, and government. A tour of the MSFC microgravity research facilities was held on June 12, 1996. This volume is comprised of the research reports submitted by the principal investigators after the conference and presentations made by various NASA microgravity science managers.

PREFACE: 5th Baltic Conference on Silicate Materials

NASA Astrophysics Data System (ADS)

Mezinskis, G.; Bragina, L.; Colombo, P.; Frischat, G. H.; Grabis, J.; Greil, P.; Deja, J.; Kaminskas, R.; Kliava, J.; Medvids, A.; Nowak, I.; Siauciunas, R.; Valancius, Z.; Zalite, I.

2011-12-01

Logo This Volume of IOP Conference Series: Materials Science and Engineering presents a selection of the contributions to the 5th Baltic Conference on Silicate Materials (BaltSilica2011) held at Riga Technical University, Riga, Latvia from 23-25 May 2011. The conference was organized by Riga Technical University (Latvia) and Kaunas University of Technology (Lithuania). The series of Baltic conferences on silicate materials was started since 2004: the first conference was held in Riga, Latvia, 2004; the second conference was held in Kaunas, Lithuania 2005; the third was held again in Riga, Latvia, 2007, and the fourth was held in Kaunas, Lithuania 2009. BaltSilica 2011 was attended by around 50 participants from Latvia, Lithuania, Estonia, Germany, Poland, Italy, France, Ukraine and Russia. In comparison with previous silicate materials conferences, the broadening of participating countries is an indication of the interest of scientists, engineers and students to exchange research ideas, latest results, and to find new research topics for cooperation in the fields of silicate, high temperature materials, and inorganic nanomaterials. The scientific programme included 8 invited plenary lectures 23 oral presentations and 25 posters [1]. Scientific themes covered in the conference and in this special issue: Natural and Artificial Stone Materials; Traditional and New Ceramic and Glass-Like Materials; Nanoparticles and Nanomaterials. This volume consists of 23 selected proceeding papers. The Editor of this special issue is grateful to all the contributors to BaltSilica 2011. I am also very grateful to the scientific committee, the local organizing committee, the session chairs, the referees who refereed the submitted articles to this issue, and to students from the Department of Silicate, High Temperature and Inorganic Nanomaterials Technology of the Riga Technical University who ensured the smooth running of the conference. Particular thanks goes to eight plenary speakers who provided interesting findings and thoughtful overviews in the scientific themes of the conference. Special thanks go to Prof., Dr.rer.nat. Günther Heinz Frischat (Germany) who encouraged and supported the organization of these scientific meetings from the very first BaltSilica conferences. With warm regards and best wishes for the next BaltSilica conference. The Conference Chairman Gundars Mezinskis Reference [1] Baltic Conference on Silicate Materials. Book of abstracts of the 5th Baltic Conference on Silicate Materials BaltSilica 2011 : 23-25 May 2011, Riga, Latvia ed G Mezinskis, G Sedmale, J Setina, I Sperberga, L Krage, I Pavlovska, D Andersone (Riga: RTU Publishing House) p 94

Field-Induced Texturing of Ceramic Materials for Unparalleled Properties

DTIC Science & Technology

2017-03-01

research for materials-by- design and advanced processing. Invited talk; 17th International Conference on Experimental Mechanics; 2016 Jul; Rhodes...material that could potentially be textured despite its diamagnetic nature. Predictive DFT modeling and experimental testing methods were designed ...presented at the Mater Science Forum; 2007 (unpublished). 71. Sugiyama T, Tahashi M, Sassa K, Asai S. The control of crystal orientation in non -magnetic

European Conference on Advanced Materials and Processes Held in Aachen, Federal Republic of Germany on November 22-24, 1989

DTIC Science & Technology

1989-11-24

proceedings after the conference (the proceedings will consist of 3 volumes), extended abstracts, welcome reception, poster buffet, snack on Friday...poster buffet, snack on Friday, refreshments during official breaks. (This fee does not include the proceedings). " A limited number of registrations...buffet, snack on Friday, refreshments during the official breaks. (This fee does not include the proceedings). " Accompanying persons who are not

NDE Conference on Civil Engineering : a joint conference of the 7th Structural Materials Technology Conference (SMT) and the 6th International Symposium on Nondestructive Testing in Civil Engineering (NDT-CE)

DOT National Transportation Integrated Search

2007-01-01

The 2006 NDE conference on Civil Engineering was held in St. Louis, MO on August 14 18, 2006. The conference combined the 7th Structural Materials Technology Conference (SMT) along with the 6th International Symposium on Nondestructive Testing in...

PREFACE: Annual Conference on Functional Materials and Nanotechnologies - FM&NT 2011

NASA Astrophysics Data System (ADS)

Sternberg, Andris; Muzikante, Inta; Zicans, Janis

2011-06-01

The International Conference Functional Materials and Nanotechnologies (FM&NT-2011) was held in Riga, 5-8 April 2011 in the Institute of Solid State Physics, University of Latvia (ISSP LU). The conference was organized in co-operation with projects ERANET 'MATERA' and National Research programme in Materials Science and Information Technologies. The purpose of the conference was to bring together scientists, engineers and students from universities, research institutes and related industrial companies active in the field of advanced material science and materials technologies trends and future activities. Scientific themes covered in the conference are: theoretical research and modelling of processes and materials; materials for energetics, renewable energy technologies and phtovoltaics; multifunctional inorganic, organic and hybrid materials for photonic, micro and nanoelectronic applications and innovative methods for research of nanostructures; advanced technologies for synthesis and research of nanostructured materials, nanoparticles, thin films and coatings; application of innovative materials in science and economics. The number of registered participants from 17 countries was nearly 300. During three days of the conference 22 invited, 69 oral reports and 163 posters were presented. 40 papers, based on these reports, are included in this volume of IOP Conference Series: Materials Science and Engineering. Additional information about FM&NT-2011 is available in its homepage http://www.fmnt.lu.lv. The Organizing Committee would like to thank all speakers, contributors, session chairs, referees and meeting staff for their efforts in making the FM&NT-2011 successful. The Organizing Committee sincerely hopes that that the conference gave all participants new insights into the widespread development of functional materials and nanotechnologies and would enhance the circulation of information released at the meeting. Andris Sternberg Inta Muzikante Janis Zicans Conference photograph ERAF logo International Organizing Committee Andris Sternberg (chairperson), Institute of Solid State Physics, University of Latvia, Latvia, MATERA Juras Banys, Vilnius University, Lithuania Gunnar Borstel, University of Osnabrück, Germany Niels E Christensen, University of Aarhus, Denmark Robert A Evarestov, St. Petersburg State University, Russia Claes-Goran Granqvist, Uppsala University, Sweden Dag Høvik, The Research Council of Norway, Norway, MATERA Marco Kirm, Institute of Physics, University of Tartu, Estonia Vladislav Lemanov, Ioffe Physical Technical Institute, Russia Witold Lojkowski, Institute of High Pressure Physics, Poland Ergo Nommiste, University of Tartu, Estonia Helmut Schober, Institut Laue-Langevin, France Sisko Sipilä, Finnish Funding Agency for Technology and Innovation, Finland, MATERA Ingólfur Torbjörnsson, Icelandic Centre for Research, Iceland, MATERA Marcel H Van de Voorde, University of Technology Delft, The Netherlands International Program Committee Inta Muzikante (chairperson), Institute of Solid State Physics, University of Latvia, Latvia, MATERA Liga Berzina-Cimdina, Institute of Biomaterials and Biomechanics, Riga Technical University, Latvia Janis Grabis, Institute of Inorganic Chemistry, Riga Technical University, Latvia Leonid V Maksimov, Vavilov State Optical Institute, Russia Linards Skuja, Institute of Solid State Physics, University of Latvia, Latvia Maris Springis, Institute of Solid State Physics, University of Latvia, Latvia Ilmars Zalite, Institute of Inorganic Chemistry, Riga Technical University, Latvia Janis Zicans, Institute of Polymers, Riga Technical University Local Committee: Liga Grinberga, Anatolijs Sarakovskis, Jurgis Grube, Raitis Siatkovskis, Maris Kundzins, Anna Muratova, Maris Springis, Aivars Vembris, Krisjanis Smits, Andris Fedotovs, Dmitrijs Bocarovs, Anastasija Jozepa, Andris Krumins.

Preface - 'NANOSMAT-Paris 2017'

NASA Astrophysics Data System (ADS)

De Hosson, Jeff Th. M.; Ali, Nasar; Fierro, Giuseppe; Aliofkhazraei, Mahmood; Chipara, Mircea

2018-07-01

The "International Conference on Surfaces, Coatings and Nano-Structured Materials" (NANOSMAT) has rapidly emerged as the premier conference in the field of materials science, engineering, technology and all aspects of "nano". The 12th International Conference on Surfaces, Coatings and Nanostructured Materials (NANOSMAT) was held at the Pierre & Marie Curie University in Paris, France. This conference is in the NANOSMAT conference series. The first two NANOSMAT conferences were held in Portugal (2005, 2007), whereas, the subsequent NANOSMAT meetings were held in Barcelona (Spain), Rome (Italy), Reims (France), Krakow (Poland), Prague (Czech Republic), Granada (Spain), Dublin (Ireland), Manchester (UK) and Aveiro (Portugal).

International Conference of Applied Science and Technology for Infrastructure Engineering

NASA Astrophysics Data System (ADS)

Elvina Santoso, Shelvy; Hardianto, Ekky

2017-11-01

Preface: International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017. The International Conference of Applied Science and Technology for Infrastructure Engineering (ICASIE) 2017 has been scheduled and successfully taken place at Swiss-Bell Inn Hotel, Surabaya, Indonesia, on August 5th 2017 organized by Department of Civil Infrastructure Engineering, Faculty of Vocation, Institut Teknologi Sepuluh Nopember (ITS). This annual event aims to create synergies between government, private sectors; employers; practitioners; and academics. This conference has different theme each year and “MATERIAL FOR INFRASTUCTURE ENGINEERING” will be taken for this year’s main theme. In addition, we also provide a platform for various other sub-theme topic including but not limited to Geopolymer Concrete and Materials Technology, Structural Dynamics, Engineering, and Sustainability, Seismic Design and Control of Structural Vibrations, Innovative and Green Buildings, Project Management, Transportation and Highway Engineering, Geotechnical Engineering, Water Engineering and Resources Management, Surveying and Geospatial Engineering, Coastal Engineering, Geophysics, Energy, Electronic and Mechatronic, Industrial Process, and Data Mining. List of Organizers, Journal Editors, Steering Committee, International Scientific Committee, Chairman, Keynote Speakers are available in this pdf.

EDITORIAL: Cluster issue on fine particle magnetism

NASA Astrophysics Data System (ADS)

Fiorani, D.

2008-07-01

This Cluster issue of Journal of Physics D: Applied Physics arises from the 6th International Conference on Fine Particle Magnetism (ICFPM) held in Rome during 9-12 October 2007 at the headquarters of the National Research Council (NCR). It contains a collection of papers based on both invited and contributed presentations at the meeting. The ICFPM Conferences have previously been held in Rome, Italy (1991), Bangor, UK (1996), Barcelona, Spain (1999), Pittsburgh, USA (2002) and London, UK (2004). The aim of this series of Conferences is to bring together the experts in the field of nanoparticle magnetism at a single forum to discuss recent developments in both theoretical and experimental aspects, and technological applications. The Conference programme included sessions on: new materials, novel synthesis and processing techniques, with special emphasis on self-organized magnetic arrays; theory and modelling; surface and interface properties; transport properties; spin dynamics; magnetization reversal mechanisms; magnetic recording media and permanent magnets; biomedical applications and advanced investigation techniques. I would like to thank the European Physical Society and the Innovative Magnetic and Superconducting Materials and Devices Project of the Materials and Devices Department and the Institute of Structure of Matter (ISM) of CNR for their support. Thanks are also due to the members of the Programme Committee, to the local Organizing Committee, chaired by Elisabetta Agostinelli and to all the Conference participants. I am also indebted to the many scientists who contributed to assuring the high-quality of this Cluster by donating their time to reviewing the manuscripts contained herein. Finally, I'd like to dedicate this issue to the memories of Jean Louis Dormann, a great expert in nanoparticle magnetism, who was one of the promoters and first organizers of this series of Conferences, and of Grazia Ianni, the Conference secretary, who died before her time after having enthusiastically started to contribute to the organization of this Conference.

USSR and Eastern Europe Scientific Abstracts, Materials Science and Metallurgy, Number 56.

DTIC Science & Technology

1978-10-05

metals and materials, coatings, composites , metal corrosion, extraction and refining, forming, instrumentation, lubricants, mechanical and physical...Aluminum and Its Alloys 1 Analysis and Testing 5 Beryllium • > • 1 Coatings • 8 Composite Materials 9 Conferences • 15 Corrosion 18 Graphite...alloys, consisting in changing the chemi- cal composition of the surface layer, which plays an important role in corrosion processes. The content of

2008 Gordon Research Conference on Electrodeposition [Conference summary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moffat, Thomas P.; Gray, Nancy Ryan

2009-01-01

Electrodeposition melds key aspects of electrochemistry and materials science. In the last decade the advent of a variety of remarkable in situ characterization methods combined with the ever expanding application of wet chemical processing in high end technological endeavors has transformed the nature of the field. The 'old black magic' is giving way to the rigors of science as the electrodeposition process plays a central role in the fabrication of state-of-the-art ULSI and MEMS devices as well as being a key tool in the fabrication of novel materials and nanostructures. This year the conference will consider several timely issues suchmore » as how electrodeposition can contribute to the effective production of energy conversion devices, ranging from solar collectors to fuel cell electrocatalysts. Likewise, the challenge of building contacts and interconnects for next generation electronics will be examined over length scales ranging from individual atoms or molecules to chip stacking. Electrochemical fabrication of magnetic materials and devices as well as composite materials will also be discussed. Nucleation and growth phenomena underlie all aspect of electrochemical deposition and this year's meeting will consider the effect of both adsorbates and stress state on morphological evolution during thin film growth. A variety of new measurement methods for studying the growing electrode/electrolyte interface will also be detailed. In addition to the scheduled talks a session of short talks on late breaking news will be held Wednesday evening. There will also be at least two lively poster sessions that are essential elements of the conference and to which all attendees are encouraged to contribute. This will be 7th Electrodeposition GRC and based on past experience it is the premier 'mixing bowl' where young investigators and international experts have an extended opportunity to interact in a fun and collegial atmosphere. The afternoons provide free time for discussions coupled with mountain hikes, lake trips, and/or lively soccer, volleyball or tennis matches! We anticipate having some funds available to help graduate students and postdoctoral associates attend the meeting. The attendance of this popular conference is limited so early registration is strongly advised.« less

Second International Conference on Near-Field Optical Analysis: Photodynamic Therapy and Photobiology Effects

NASA Technical Reports Server (NTRS)

Bulgher, Debra L. (Editor); Morrison, Dennis

2002-01-01

The International NASA/DARPA Photobiology Conference held at the Johnson Space Center in Houston/TX demonstrated where low level laser therapy (LLLT), respectively low intensity light activated biostimulation (LILAB) and nanotechnological applications employing photobiomodulation techniques will presumably go in the next ten years. The conference was a continuation of the 1st International Conference on Nearfield Optical Analysis organized by Andrei Sommer (ENSOMA Lab, University of Ulm, Germany) in November 2000 at Castle Reisenburg, Germany, which started with a group of ten scientists from eight different countries. The 1st conference was co-sponsored by the American Chemical Society to evaluate the molecular mechanism of accelerated and normal wound healing processes. The 2nd conference was co-sponsored by DARPA, NASA-JSC and the Medical College of Wisconsin. Despite the short time between events, the 2nd conference hosted 40 international experts form universities, research institutes, agencies and the industry. The materials published here are expected to become milestones forming a novel platform in biomedical photobiology. The multidisciplinary group of researchers focused on LLLT/LILAB-applications under extreme conditions expected to have beneficial effects particularly in space, on submarines, and under severe battlefield conditions. The group also focused on novel technologies with possibilities allowing investigating the interaction of light with biological systems, molecular mechanisms of wound healing, bone regeneration, nerve regeneration, pain modulation, as well as biomineralization and biofilm formulation processes induced by nanobacteria.

PREFACE: International Congress on Energy Fluxes and Radiation Effects (EFRE-2014)

NASA Astrophysics Data System (ADS)

2014-11-01

The International Congress on Energy Fluxes and Radiation Effects 2014 (EFRE 2014) was held in Tomsk, Russia, on September 21-26, 2014. The organizers of the Congress were the Institute of High Current Electronics SB RAS and Tomsk Polytechnic University. EFRE 2014 combines three international conferences which are regularly held in Tomsk, Russia: the 18th International Symposium on High-Current Electronics (18th SHCE), the 12th International Conference on Modification of Materials with Particle Beams and Plasma Flows (12th CMM) and the 16th International Conference on Radiation Physics and Chemistry of Condensed Matter (16th RPC). The International Conference on Radiation Physics and Chemistry of Condensed Matter is a traditional representative forum devoted to the discussion of the fundamental problems of physical and chemical non-linear processes in condensed matter (mainly inorganic dielectrics) under the action of particle and photon beams of all types including pulsed power laser radiation. The International Symposium on High-Current Electronics is held biannually in Tomsk, Russia. The program of the conferences covers a wide range of scientific and technical areas including pulsed power technology, ion and electron beams, high-power microwaves, plasma and particle beam sources, modification of materials, and pulsed power applications in chemistry, biology and medicine. The 12th International Conference on Modification of Materials with Particle Beams and Plasma Flows is devoted to the discussion of the fundamental and applied issues in the field of modification of materials properties with particle beams and plasma flows. The six-day Congress brought together more than 250 specialists and scientists from different countries and organizations and provided an excellent opportunity to exchange knowledge, make oral contributions and poster presentations, and initiate discussion on the topics of interest. The proceedings were edited by Victor Lisitsyn, Vladimir Lopatin, and Anna Bogdan. We appreciate the contribution of the invited speakers and all participants, as well as sponsors "Intech Analytics" and "MICROSPLAV" for making the Congress successful.

Physics and Process Modeling (PPM) and Other Propulsion R and T. Volume 1; Materials Processing, Characterization, and Modeling; Lifting Models

NASA Technical Reports Server (NTRS)

1997-01-01

This CP contains the extended abstracts and presentation figures of 36 papers presented at the PPM and Other Propulsion R&T Conference. The focus of the research described in these presentations is on materials and structures technologies that are parts of the various projects within the NASA Aeronautics Propulsion Systems Research and Technology Base Program. These projects include Physics and Process Modeling; Smart, Green Engine; Fast, Quiet Engine; High Temperature Engine Materials Program; and Hybrid Hyperspeed Propulsion. Also presented were research results from the Rotorcraft Systems Program and work supported by the NASA Lewis Director's Discretionary Fund. Authors from NASA Lewis Research Center, industry, and universities conducted research in the following areas: material processing, material characterization, modeling, life, applied life models, design techniques, vibration control, mechanical components, and tribology. Key issues, research accomplishments, and future directions are summarized in this publication.

ICCG-10: Tenth International Conference on Crystal Growth. Poster presentation abstracts

NASA Technical Reports Server (NTRS)

1992-01-01

Poster presentation abstracts from the tenth International Conference on Crystal Growth (ICCG) (Aug. 16-21, 1992) are provided. Topics discussed at the conference include crystal growth mechanisms, superconductors, semiconductors, laser materials, optical materials, and biomaterials. Organizing committees, ICCG advisory board and officers, and sponsors of the conference are also included.

Peer review statement

NASA Astrophysics Data System (ADS)

2018-05-01

All papers published in this volume of IOP Conference Series: Materials Science and Engineering have been peer reviewed through processes administered by the proceedings Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Publishing.

Peer review statement

NASA Astrophysics Data System (ADS)

2017-11-01

All papers published in this volume of IOP Conference Series: Materials Science and Engineering have been peer reviewed through processes administered by the proceedings Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Publishing.

Peer review statement

NASA Astrophysics Data System (ADS)

2017-10-01

All papers published in this volume of IOP Conference Series: Materials Science and Engineering have been peer reviewed through processes administered by the proceedings Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Publishing.

Peer review statement

NASA Astrophysics Data System (ADS)

2017-09-01

All papers published in this volume of IOP Conference Series: Materials Science and Engineering have been peer reviewed through processes administered by the proceedings Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Publishing.

Peer review statement

NASA Astrophysics Data System (ADS)

2018-02-01

All papers published in this volume of IOP Conference Series: Materials Science and Engineering have been peer reviewed through processes administered by the proceedings Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Publishing.

Peer review statement

NASA Astrophysics Data System (ADS)

2017-12-01

All papers published in this volume of IOP Conference Series: Materials Science and Engineering have been peer reviewed through processes administered by the proceedings Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Publishing.

Peer review statement

NASA Astrophysics Data System (ADS)

2018-03-01

All papers published in this volume of IOP Conference Series: Materials Science and Engineering have been peer reviewed through processes administered by the proceedings Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Publishing.

PREFACE: 6th EEIGM International Conference on Advanced Materials Research

NASA Astrophysics Data System (ADS)

Horwat, David; Ayadi, Zoubir; Jamart, Brigitte

2012-02-01

The 6th EEIGM Conference on Advanced Materials Research (AMR 2011) was held at the European School of Materials Engineering (EEIGM) on the 7-8 November 2011 in Nancy, France. This biennial conference organized by the EEIGM is a wonderful opportunity for all scientists involved in the EEIGM programme, in the 'Erasmus Mundus' Advanced Materials Science and Engineering Master programme (AMASE) and the 'Erasmus Mundus' Doctoral Programme in Materials Science and Engineering (DocMASE), to present their research in the various fields of Materials Science and Engineering. This conference is also open to other universities who have strong links with the EEIGM and provides a forum for the exchange of ideas, co-operation and future orientations by means of regular presentations, posters and a round-table discussion. This edition of the conference included a round-table discussion on composite materials within the Interreg IVA project '+Composite'. Following the publication of the proceedings of AMR 2009 in Volume 5 of this journal, it is with great pleasure that we present this selection of articles to the readers of IOP Conference Series: Materials Science and Engineering. Once again it represents the interdisciplinary nature of Materials Science and Engineering, covering basic and applicative research on organic and composite materials, metallic materials and ceramics, and characterization methods. The editors are indebted to all the reviewers for reviewing the papers at very short notice. Special thanks are offered to the sponsors of the conference including EEIGM-Université de Lorraine, AMASE, DocMASE, Grand Nancy, Ville de Nancy, Region Lorraine, Fédération Jacques Villermaux, Conseil Général de Meurthe et Moselle, Casden and '+Composite'. Zoubir Ayadi, David Horwat and Brigitte Jamart

Thermal structures and materials for high-speed flight; Collection of Papers of the 1st Thermal Structures Conference, University of Virginia, Charlottesville, Nov. 13-15, 1990

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thornton, E.A.

1992-01-01

The present conference discusses aerobrake-maneuver vehicle aerothermodynamics, aerothermal issues in the structural design of high speed vehicles, laser surface-alloying of superlight metals with ceramic surfaces, high-temperature Al alloys for supersonic and hypersonic vehicles, advanced metallics for high temperature airframes, novel materials for engine applications, and the development status of computational methods for high temperature structural design. Also discussed are a transient thermal-structural analysis using adaptive unstructured remeshing and mesh movement, the FEM thermoviscoplastic analysis of aerospace structures, hot-structures testing techniques, a thermal-structural analysis of a carbon-carbon/refractory metal heat pipe-cooled leading edge, dynamic effects in thermoviscoplastic structures, microlevel thermal effects inmore » metal-matrix composites (MMCs), thermomechanical effects in the plasma spray manufacture of MMC monotapes, and intelligent HIP processing. Most of the presentations at this conference were abstracted previously (see A91-16027 to A91-16047).« less

International conference on Functional Materials and Nanotechnologies (FM&NT-2013), 21-24 April 2013, Tartu, Estonia

NASA Astrophysics Data System (ADS)

Nõmmiste, Ergo; Kirm, Marco; Plank, Toomas

2014-04-01

The annual international conference Functional Materials and Nanotechnologies (FM&NT) was started in 2006 by scientists from the Institute of Solid State Physics, University of Latvia. The warm welcome and open atmosphere of this scientific conference has turned it into an event where people from different countries and different fields come and meet under the shared umbrella of functional materials and nanotechnology. It is particularly important for early stage scientists who are looking for new knowledge and contacts with people from various fields to build their own network. Our Latvian colleagues, with their success in internationalization, made us neighbouring Estonians so jealous that we could not help but propose organising the conference every second year in Estonia. In a way, this conference is a continuation of the idea of the famous Baltic seminars which took place over several decades in the last century. Due to political constraints, these seminars were only open to scientists of former Eastern Europe countries, but had a great popularity and attendance from over the whole Soviet Union. Many collaborations started from the initial personal contact between scientists at these twice yearly seminars, held alternately in Latvia and Estonia. At the FM&NT 2012 conference, the decision was made that Institute of Physics, University of Tartu would organise the next event in Tartu in 2013. FM&NT-2013 was hence held in Tartu (Estonia) from 21-24 April 2013 at the Dorpat Conference Centre. The main selected topics of the conference were: (i) multifunctional materials, (ii) nanomaterials, (iii) materials for sustainable energy applications and (vi) theory. Additionally, the focus in this conference was on studies with the help of synchrotron radiation and other novel light sources such as free electron lasers. The conference provided an opportunity for 300 scientists from 21 countries to meet, establish contacts, exchange knowledge and discuss their research. During the three days of the conference, 14 invited talks were given, 45 oral and five commercial talks by companies were delivered and more than 200 posters were presented and discussed. As an outcome of the conference, 14 contributions were selected as regular papers to be submitted as a special section in Physica Scripta , and they are published in this issue. Additionally, 62 papers submitted based on the conference contributions, were included in IOP Conference Series : Materials Science and Engineering and are available at http://iopscience.iop.org/1757-899X/49/1. Additional information about FM&NT-2013 is available at its homepage http://fmnt.ut.ee/. Future information regarding the conference will be published on the website. Photograph. Photograph. Participants of FM&NT-2013, the photo was taken in front of the Science Centre AHHAA on 23 April 2013. Acknowledgement The Organizing Committee would like to thank all the speakers, contributors, session chairs and other staff involved for their personal efforts in making FM&NT-2013 successful and memorable. We express our thanks to all the authors for their research contribution presented in this issue. We express our gratitude to all of the reviewers and editors with special thanks to the Editor-in-Chief of Physica Scripta Dr Suzy Lidström, who took part of the conference with an invited talk. The efforts of members of the IOP Publishing team, especially the publisher Yasmin McGlashan, and the guest editor from the local organizing committee Dr Rainer Pärna, are also gratefully acknowledged. We would like to acknowledge financial support by Tartu University Development Fund, Estonian national projects supporting Materials Science, Science Internationalisation and Centre of Excellence programs based on the contribution of the European Structural Funds and Estonian national funding. Also, the graduate school on 'Functional Materials and Technologies' supported by the European Social Fund has given a generous contribution to assist in the participation of our early stage researchers. This support is gratefully acknowledged. We also would like to acknowledge and thank all the sponsors, companies (Raith, Bruker, Vistec Lithography, Saint-Tech, The Doma Group, Armgate and American Elements) who create conditions for our everyday research in the Baltics. We hope that the continuation of the tradition introduced with this conference will strengthen the international cooperation of scientists from Baltic states with researchers from other countries. In particular, we very much value the communication between new generations of researches which takes place, ensuring the fruitful development of science in our countries. The Organizing Committee hopes that the conference FM&NT-2013 gave the participants good insight into recent progress in nanotechnology, sustainable energetics, the processing and modelling of multifunctional materials and research enabled by the use of synchrotron radiation or other novel light sources such as free electron lasers. We sincerely hope that the conference has provided support for the circulation of information and brought together many young and experienced scientists from different fields, leading to fruitful discussions. We hope that all of the participants had an ejoyable and memorable time in Tartu. We welcome you back in the future.

PREFACE: 19th International Conference on Electron Dynamics in Semiconductors, Optoelectronics and Nanostructures (EDISON'19)

NASA Astrophysics Data System (ADS)

González, T.; Martín-Martínez, M. J.; Mateos, J.

2015-10-01

The 19th International Conference on Electron Dynamics in Semiconductors, Optoelectronics and Nanostructures (EDISON'19) was held at the Hospedería Fonseca (Universidad de Salamanca, Spain), on 29 June - 2 July, 2015, and was organized by the Electronics Area from the University of Salamanca. The Conference is held biannually and covers the recent progress in the field of electron dynamics in solid-state materials and devices. This was the 19th meeting of the international conference series formerly named Hot Carriers in Semiconductors (HCIS), first held in Modena in 1973. In the edition of 1997 in Berlin the name of the conference changed to International Conference on Nonequilibrium Carrier Dynamics in Semiconductors, keeping the same acronym, HCIS; and finally in the edition of Montpellier in 2009 the name was again changed to the current one, International Conference on Electron Dynamics in Semiconductors, Optoelectronics and Nanostructures (EDISON). The latest editions took place in Santa Barbara, USA, in 2011 and Matsue, Japan, in 2013. Research work on electron dynamics involves quite different disciplines, and requires both fundamental and technological scientific efforts. Attendees to the conference come mostly from academic institutions, belonging to both theoretical and experimental groups working in a variety of fields, such as solid-state physics, electronics, optics, electrical engineering, material science, laser physics, etc. In this framework, events like the EDISON conference become a basic channel for the progress in the field. Here, researchers working in different areas can meet, present their latest advances and exchange their ideas. The program of EDISON'19 included 13 invited papers, 61 oral contributions and 73 posters. These contributions originated from scientists in more than 30 different countries. The Conference gathered 140 participants, coming from 24 different countries, most from Europe, but also with a significant participation from Japan and USA. The two topics receiving more abstracts correspond to fields attracting a lot of attention and research activity in the last years: electron dynamics in graphene and related materials and devices, and THz phenomena in nanostructures. Other topics like coherent dynamics in ultrafast optical phenomena or quantum processing, and semiconductor-based spintronics, had also an important presence in the program. Thanks are given to the members of the International and Scientific Program Committees for their valuable and qualified assistance in the selection of invited speakers and the review of the submitted contributions; and also to those attendees who assisted us in the review process of the papers included in this volume. We would like also to thank the institutions and sponsors that contributed to support the conference. Firstly the University of Salamanca, one of the oldest in the world, commemorating within three years, in 2018, the 8th century of its foundation in 1218. EDISON'19 can be considered as one more of the events taking place to celebrate such centennial. The Salamanca City Council also contributed in the organization of the conference. We acknowledge as well the support from the Spanish Ministry of Economy and Competitiveness, and from our sponsors and exhibitors, Oxford Instruments and Rohde&Schwarz. Finally, we would like to thank all participants and authors of the proceedings for their support and contributions to the conference. We devote this volume to the memory of Prof. Daniel Pardo, our dear boss in Salamanca for many years, who passed away in 2013. He was the pioneer of our activity in the field of the conference and would have enjoyed a lot the celebration of EDISON in Salamanca.

FOREWORD International Conference on Defects in Insulating Materials

NASA Astrophysics Data System (ADS)

Valerio, Mário Ernesto Giroldo; Jackson, R. A.

2010-11-01

These proceedings represent a sample of the scientific works presented during ICDIM2008, the 16th International Conference on Defects in Insulating Materials, held at the Federal University of Sergipe, Aracaju, Brazil from 24-29 August 2008. The conference was the latest in a series which began at Argonne in 1956, and which has been held most recently in Riga, Latvia (2004) and Johannesburg, South Africa (2000). The conference was also related scientifically to the EURODIM series, which have been held most recently in Milan, Italy (2006), Wroclaw, Poland (2002) and Pecs, Hungary (2010). The aim of the conference was to bring together physicists, chemists and materials scientist to discuss defects in insulating materials and their effect on materials, including their optical, mass/charge transport, energy storage and sensor properties. The conference featured 6 plenary lectures, 60 contributed lectures and about 130 posters. The posters were displayed for the whole conference, but discussed in two three-hour sessions. We are grateful to the International Advisory Committee for suggesting invited speakers and to the Programme Committee for their help in refereeing all the abstracts and choosing the contributed oral contributions. We would also like to thank the Local Organising Committee and the Brazilian Physical Society for their help with local organisation and the online registration/payment process respectively. The chairpersons would like to specially thanks all the sponsors listed below for financial support. The Federal University of Sergipe, one of the public and 'free tuition' Universities of the Country, run by the Brazilian Ministry of Education, were pleased to host this 16th meeting, the first one in Latin America. Mario E G Valerio Conference Chair Robert A Jackson Programme Chair Conference Scope Scope of the Conference was the presentation of the latest investigations on point and extended defects in bulk materials and thin films. Technological applications will be presented alongside fundamental measurements and theories. The main scientific areas included: 1 Fundamental physical phenomena Point and extended defects in wide band-gap systems: oxides, fluorides, nitrides, alkali- and silver-halides, perovskites, minerals, ceramics, nano-structures, organic molecular crystals, glasses, high-k and low-k materials, photonic crystals. 2 Defects at surfaces and interfaces Thin films and low-dimensional systems. Colloids, nano-crystals, and aggregates. Defects and material preparation technology. Defects modelling and computational methods. Radiation effects, radiation induced defects, colour centres. Luminescence of excitons, impurities, and defects. Electronic excitations, excited state dynamics, radiative and non-radiative relaxations. Scintillation, energy transfer and storage, carrier trapping phenomena. Non-linear optical phenomena. Laser active centres. Phonons and defects, electron-phonon interactions. Defect diffusion, ionic relaxations, ionic transport. 3 Technological applications Radiologic imaging and detection, scintillators, and dosimeters. Optical devices and photonics, photorefractive electro-optics, optical fibres, lasers. Materials for micro-electronics. Solid electrolytes, fuel cells, electrochemical sensors, fast ionic conductors. Conference chairpersons: Mário E G Valerio (Conference Chairman), Physics Department, Federal University of Sergipe, SE, Brasil Robert A Jackson (Programme Chairman), School of Physical and Geographical Sciences, Keele University, Keele, UK Conference committees: International Advisory Committee R Capelletti, Italy A V Chadwick, UK J Corish, Ireland J D Comins, South Africa H W den Hartog, The Netherlands K Funke, Germany Robert A Jackson, UK O Kanert, Germany A A Kaplyanskii, Russia A Lushchik, Estonia F Lüty, USA M Moreno, Spain P E Ngoepe, South Africa M Nikl, Czech Republic S V Nistor, Romania Ch Pedrini, France O F Schirmer, Germany J-M Spaeth, Germany A M Stoneham, UK M Suszynska, Poland I Tale, Latvia M E G Valerio, Brasil R T Williams, USA Programme Committee Robert A Jackson (Chair), University of Keele, UK R M Montereali, ENEA C.R. Frascati, Rome, Italy M Moreno, University of Cantabria, Spain Ch Pedrini, University Lyon, France Klaus W H Krambrock, UFMG, MG, Brasil Volkmar Dierolf, Lehigh University, USA Laszlo Kovács, Hungarian Academy of Sciences, Hungary M E G Valerio, UFS, SE, Brasil Local Organizing Committee M E G Valerio, UFS, SE, Brasil Sonia L Baldochi, IPEN, SP, Brasil Klaus W H Krambrock, UFMG, MG, Brasil Livio Amaral, UFRGS, RS, Brasil Ana R Blak, USP, SP, Brasil Marco Cremona, PUC-RJ, RJ, Brasil Anderson S L Gomes, UFPE, PE, Brasil Spero Penha Morato, LaserTools, SP, Brasil Alejandro Ayala, UFC, CE, Brasil ICDIM2008 Sponsors: Sponsors

IFLA General Conference, 1986. Pre-Conference Seminar on Automated Systems for Access to Multilingual and Multiscript Library materials: Problems and Solutions. Papers.

ERIC Educational Resources Information Center

International Federation of Library Associations and Institutions, The Hague (Netherlands).

A seminar which considered problems and solutions regarding automated systems for access to multilingual and multiscript library materials was held as a pre-session before the IFLA general conference in 1986. Papers presented include: (1) "Romanized and Transliterated Databases of Asian Language Materials--History, Problems, and…

EDITORIAL: Adaptive and active materials: Selected papers from the ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 10) (Philadelphia, PA, USA, 28 September-1 October 2010) Adaptive and active materials: Selected papers from the ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 10) (Philadelphia, PA, USA, 28 September-1 October 2010)

NASA Astrophysics Data System (ADS)

Brei, Diann

2011-09-01

The third annual meeting of the AMSE/AIAA Smart Materials, Adaptive Structures and Intelligent Systems Conference (SMASIS) took place in the heart of historic Philadelphia's cultural district, and included a pioneer banquet in the National Constitutional Center. The applications emphasis of the 2010 conference was reflected in keynote talks by Dr Alan Taub, vice president of General Motors global research and development, 'Smart materials in the automotive industry'; Dr Charles R Farrar, engineering institute leader at Los Alamos National Laboratory, 'Future directions for structural health monitoring of civil engineering infrastructure'; and Professor Christopher S Lynch of the University of California Los Angeles, 'Ferroelectric materials and their applications'. The SMASIS conference was divided into six technical symposia each of which included basic research, applied technological design and development, and industrial and governmental integrated system and application demonstrations. The six symposia were: SYMP 1 Multifunctional Materials; SYMP 2 Active Materials, Mechanics and Behavior; SYMP 3 Modeling, Simulation and Control; SYMP 4 Enabling Technologies and Integrated System Design; SYMP 5 Structural Health Monitoring/NDE; and SYMP 6 Bio-inspired Smart Materials and Structures. In addition, the conference introduced a new student and young professional development symposium. Authors of papers in the materials areas (symposia 1, 2 and 6) were invited to write a full journal article on their presentation topic for publication in this special issue of Smart Materials and Structures. This set of papers demonstrates the exceptional quality and originality of the conference presentations. We are appreciative of their efforts in producing this collection of highly relevant articles on smart materials.

International Conference on Applied Sciences (ICAS2013)

NASA Astrophysics Data System (ADS)

Lemle, Ludovic Dan; Jiang, Yiwen

2014-03-01

The International Conference on Applied Sciences (ICAS2013) took place in Wuhan, P R China from 26-27 October 2013 at the Military Economics Academy. The conference is regularly organized, alternately in Romania and in P R China, by ''Politehnica'' University of Timişoara, Romania, and Military Economics Academy of Wuhan, P R China, with the aim to serve as a platform for the exchange of information between various areas of applied sciences, and to promote the communication between the scientists of different nations, countries and continents. The conference has been organized for the first time in 15-16 June 2012 at the Engineering Faculty of Hunedoara, Romania. The topics of the conference covered a comprehensive spectrum of issues: Economical sciences Engineering sciences Fundamental sciences Medical sciences The conference gathered qualified researchers whose expertise can be used to develop new engineering knowledge that has applicability potential in economics, defense, medicine, etc. The number of registered participants was nearly 90 from 5 countries. During the two days of the conference 4 invited and 36 oral talks were delivered. A few of the speakers deserve a special mention: Mircea Octavian Popoviciu, Academy of Romanian Scientist — Timişoara Branch, Correlations between mechanical properties and cavitation erosion resistance for stainless steels with 12% chromium and variable contents of nickel; Carmen Eleonora Hărău, ''Politehnica'' University of Timişoara, SWOT analysis of Romania's integration in EU; Ding Hui, Military Economics Academy of Wuhan, Design and engineering analysis of material procurement mobile operation platform; Serban Rosu, University of Medicine and Pharmacy ''Victor Babeş'' Timişoara, Cervical and facial infections — a real life threat, among others. Based on the work presented at the conference, 14 selected papers are included in this volume of IOP Conference Series: Materials Science and Engineering. These papers present new researches in the various fields of materials engineering, mechanical engineering, computers engineering, mathematical engineering and clinical engineering. It's our great pleasure to present this volume of IOP Conference Series: Materials Science and Engineering to the scientific community to promote further researches in these areas. We sincerely hope that the papers published in this volume will contribute to the advancement of knowledge in the respective fields. All papers published in this volume of IOP Conference Series: Materials Science and Engineering (MSE) have been peer reviewed through processes administered by the editors of the ICAS2013 proceedings, Ludovic Dan Lemle and Yiwen Jiang. Special thanks should be directed to the organizing committee for their tremendous efforts in organizing the conference: General Chair Zhou Laixin, Military Economics Academy of Wuhan Co-chairs Du Qifa, Military Economics Academy of Wuhan Serban Viorel-Aurel, ''Politehnica'' University of Timişoara Fen Youmei, Wuhan University Lin Pinghua, Huazhong University of Science and Technology Members Lin Darong, Military Economics Academy of Wuhan Guo Zhonghou, Military Economics Academy of Wuhan Sun Honghong, Military Economics Academy of Wuhan Liu Dong, Military Economics Academy of Wuhan We thank the authors for their contributions and we would also like to express our gratitude everyone who contributed to this conference, especially for the generous support of the sponsor: micromega S C Micro-Mega HD S A Ludovic Dan Lemle and Yiwen Jiang Coordinators of the Scientific Committee of ICAS2013 Deatails of organizers and members of the scientific commmittee are available in the PDF

PREFACE: 15th Russian Youth Conference on Physics and Astronomy (PhysicA.SPb)

NASA Astrophysics Data System (ADS)

Sokolovskii, Grigorii; Averkiev, Nikita

2013-08-01

The fifteenth Russian Youth Conference on Physics and Astronomy PhysicA.SPb was held 23-24 October 2012 in Saint-Petersburg, Russia. The Conference continues the tradition of Saint-Petersburg Seminars on Physics and Astronomy originating from the mid-90s. The main feature of PhysicA.SPb since then, remains the combination of both scientific and educational quality of the contributions delivered to the young audience. This feature makes it possible to combine the whole spectrum of modern Physics and Astronomy within one conference. PhysicA.SPb 2012 has brought together more than 150 students, young scientists and their professors from many universities and research institutes across Russia, as well as from Belarus, Ukraine, Finland, France and the United Kingdom. Oral and poster presentations were combined into a few well-defined sections among which one should name Astronomy and Astrophysics, Physics of semiconductors, Physics of solid state, Physics and technology of the alternative energetics, Nanostructured and thin-film materials, THz and UHF materials and devices, and Physics of the quantum-sized structures. This issue of the Journal of Physics: Conference Series presents the extended contributions from participants of PhysicA.SPb 2012 that were peer-reviewed by expert referees through processes administered by the Presiders of the Organising and Programme Committees to the best professional and scientific standards. Grigorii S. Sokolovskii and Nikita S. Averkiev Editors

First NASA Advanced Composites Technology Conference, Part 2

NASA Technical Reports Server (NTRS)

Davis, John G., Jr. (Compiler); Bohon, Herman L. (Compiler)

1991-01-01

Presented here is a compilation of papers presented at the first NASA Advanced Composites Technology (ACT) Conference held in Seattle, Washington, from 29 Oct. to 1 Nov. 1990. The ACT program is a major new multiyear research initiative to achieve a national goal of technology readiness before the end of the decade. Included are papers on materials development and processing, innovative design concepts, analysis development and validation, cost effective manufacturing methodology, and cost tracking and prediction procedures. Papers on major applications programs approved by the Department of Defense are also included.

European Software Engineering Process Group Conference (2nd Annual), EUROPEAN SEPG󈨥. Delegate Material, Conference

DTIC Science & Technology

1997-06-19

states, and six of the top ten suppliers of software with the lowest defect levels are also EU member states Kerry Hanson, Director TI ex White House OST...6,M 0"M *" changes Defects reported by customers STeraQuest S ofOR Wednsday 18 Jlue (C303) 5-3 lE’s IDEAL Model organizational analyze lss.ons exeute...Indicator used to track non discretionary maintenance, enhancements, and defect corrections as well as the number of open trouble reports. 17 *Enterprise

2002 Microgravity Materials Science Conference

NASA Technical Reports Server (NTRS)

Gillies, Donald (Editor); Ramachandran, Narayanan (Editor); Murphy, Karen (Editor); McCauley, Dannah (Editor); Bennett, Nancy (Editor)

2003-01-01

The 2002 Microgravity Materials Science Conference was held June 25-26, 2002, at the Von Braun Center, Huntsville, Alabama. Organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Physical Sciences Research Division, NASA Headquarters, and hosted by NASA Marshall Space Flight Center and member institutions under the Cooperative Research in Biology and Materials Science (CORBAMS) agreement, the conference provided a forum to review the current research and activities in materials science, discuss the envisioned long-term goals, highlight new crosscutting research areas of particular interest to the Physical Sciences Research Division, and inform the materials science community of research opportunities in reduced gravity. An abstracts book was published and distributed at the conference to the approximately 240 people attending, who represented industry, academia, and other NASA Centers. This CD-ROM proceedings is comprised of the research reports submitted by the Principal Investigators in the Microgravity Materials Science program.

PREFACE: International Scientific Conference of Young Scientists: Advanced Materials in Construction and Engineering (TSUAB2014)

NASA Astrophysics Data System (ADS)

Kopanitsa, Natalia O.

2015-01-01

In October 15-17, 2014 International Scientific Conference of Young Scientists: Advanced Materials in Construction and Engineering (TSUAB2014) took place at Tomsk State University of Architecture and Building (Tomsk, Russia). The Conference became a discussion platform for researchers in the fields of studying structure and properties of advanced building materials and included open lectures of leading scientists and oral presentations of master, postgraduate and doctoral students. A special session was devoted to reports of school children who further plan on starting a research career. The Conference included an industrial exhibition where companies displayed the products and services they supply. The companies also gave presentations of their products within the Conference sessions.

Editorial

NASA Astrophysics Data System (ADS)

2006-01-01

This volume contains the Proceedings of the 14th International Conference on Ion Beam Modification of Materials, IBMM 2004, and is published by Elsevier as a special issue of Nuclear Instruments and Methods B. The conference series is the major international forum to present and discuss recent research results and future directions in the field of ion beam modification, synthesis and characterization of materials. The first conference in the series was held in Budapest, Hungary, 1978, and subsequent conferences were held every two years at locations around the Globe, most recently in Japan, Brazil and the Netherlands. The series brings together physicists, materials scientists and ion beam specialists from all over the world. The official conference language is English.

BIBLIOGRAPHY ON LEARNING PROCESS. SUPPLEMENT II.

ERIC Educational Resources Information Center

Harvard Univ., Cambridge, MA. Graduate School of Education.

THIS SUPPLEMENTARY BIBLIOGRAPHY LISTS MATERIALS ON VARIOUS FACETS OF HUMAN LEARNING. APPROXIMATELY 60 UNANNOTATED REFERENCES ARE PROVIDED FOR DOCUMENTS DATING FROM 1954 TO 1966. JOURNAL ARTICLES, BOOKS, RESEARCH REPORTS, AND CONFERENCE PAPERS ARE LISTED. SOME SUBJECT AREAS INCLUDED ARE (1) LEARNING PARAMETERS AND ABILITY, (2) RETENTION AND…

PREFACE: Selected papers from the Fourth Topical Conference on Nanoscale Science and Engineering of the American Institute of Chemical Engineers

NASA Astrophysics Data System (ADS)

Wong, Michael S.; Lee, Gil U.

2005-07-01

This special issue of Nanotechnology contains research papers contributed by the participants of the Fourth Topical Conference on Nanoscale Science and Engineering at the Annual Meeting of the American Institute of Chemical Engineers (AIChE), which was held in Austin, Texas, USA, 7-12 November, 2004. This conference saw 284 oral presentations from institutions around the world, which is the highest number for this topical conference series to date. These presentations were organized into 64 sessions, covering the range of nanotechnology subject areas in which chemical engineers are currently engaged. These sessions included the following areas. • Fundamentals: thermodynamics at the nanoscale; applications of nanostructured fluids; transport properties in nanophase and nanoscale systems; molecular modelling methods; self and directed assembly at the nanoscale; nanofabrication and nanoscale processing; manipulation of nanophases by external fields; nanoscale systems; adsorption and transport in carbon nanotubes; nanotribology; making the transition from materials and phenomena to new technologies; operation of micro-and nano-systems. • Materials: nanoparticle synthesis and stabilization; nanoscale structure in polymers; nanotemplating of polymers; synthesis of carbon nanotubes and nanotube-based materials; nanowires; nanoparticle assemblies and superlattices; nanoelectronic materials; self-assembly of templated inorganic materials; nanostructured hybrid organic/inorganic materials; gas phase synthesis of nanoparticles; multicomponent structured particles; nano energetic materials; liquid-phase synthesis of nanoparticles. • Energy: synthesis and characterization of nanostructured catalytic materials; nanomaterials and devices for energy applications. • Biotechnology: nanobiotechnology; nanotechnology for the biotechnology and pharmaceuticals industries; nanotechnology and nanobiotechnology for sensors; advances in biomaterials, bionanotechnology, biomimetic systems and tissue engineering; nanotechnology for drug delivery and imaging; bionanotechnology in cancer and cardiovascular disease; nanostructured biomaterials; nanotechnology in bioengineering; nanofabrication of biosensing devices. We are pleased to present a selection of research papers in this special issue of Nanotechnology on behalf of the Nanoscale Science and Engineering Forum (NSEF). NSEF was established in 2001 as a new division of AIChE to promote nanotechnology efforts in chemical engineering. The chemical engineering discipline deals with the production and processing of chemicals and materials, and does so through a fundamental understanding of the core issues of transport, thermodynamics, and kinetics that exist at multiple length scales. Thus, it should come as no surprise that chemical engineers have been pursuing nanotechnology research for the last fifty years. For example, fuel production has benefited immensely from improved catalysts in which their pore structure is controlled with nanoscale precision, and polymer properties have been improved by controlling the polymer supramolecular structure at the nanometre scale. Chemical engineering will continue to make important contributions to nanotechnology, and will play a critical role in the transition from basic science and engineering research to commercial applications. We would like to thank all of the authors who contributed to this special issue; the three NSEF poster presentation award winners for their papers (Sureshkumar, Sunkara, and Rinaldi groups); Dr Nina Couzin, Publisher of Nanotechnology, for her support and enthusiasm for this project; Drs Sharon Glotzer and Dan Coy who chaired the topical conference; and Drs Meyya Meyyappan and Brett Cruden (NASA Ames Research Center) for their assistance in the initial planning stages. We also take this opportunity to thank the many people and organizations who have supported the 2004 topical conference along the way, which include all the session chairs, Hyperion Catalysis International, Inc., Nanophase Technologies, Inc., and the executive board of the NSEF.

1st International Nuclear Science and Technology Conference 2014 (INST2014)

NASA Astrophysics Data System (ADS)

2015-04-01

Nuclear technology has played an important role in many aspects of our lives, including agriculture, energy, materials, medicine, environment, forensics, healthcare, and frontier research. The International Nuclear Science and Technology Conference (INST) aims to bring together scientists, engineers, academics, and students to share knowledge and experiences about all aspects of nuclear sciences. INST has evolved from a series of national conferences in Thailand called Nuclear Science and Technology (NST) Conference, which has been held for 11 times, the first being in 1986. INST2014 was held in August 2014 and hosted by Thailand Institute of Nuclear Technology (TINT). The theme was "Driving the future with nuclear technology". The conference working language was English. The proceedings were peer reviewed and considered for publication. The topics covered in the conference were: • Agricultural and food applications [AGR] • Environmental applications [ENV] • Radiation processing and industrial applications [IND] • Medical and nutritional applications [MED] • Nuclear physics and engineering [PHY] • Nuclear and radiation safety [SAF] • Other related topics [OTH] • Device and instrument presentation [DEV] Awards for outstanding oral and poster presentations will be given to qualified students who present their work during the conference.

International Conference on Electronic Processes in Organic Materials (6th) Held in Gurzuf, Crimea, Ukraine, on September 25-29, 2006

DTIC Science & Technology

2006-09-29

MEH-PPV and blends MEH-PPV/fullerene derivative to investigate the charge transfer process . Microstructure - properties correlation of blends polymer...liquid crystals 4. Nonlinear properties of organic structures and composites 5. Electronic processes within polymer composites 6. Nanostructures. Polymer...P.A.Kondratenko, Yu.M.Lopatkin, TN.Sakun. SPECTROSCOPIC PROPERTIES AND PROCESSES OF PHOTODISSOCIATION OF DYES ....... 32 D.-Q. Feng, D. Wisbey, Y. Ta4 Ya. B

PREFACE: 3rd International Workshop on Materials Analysis and Processing in Magnetic Fields (MAP3)

NASA Astrophysics Data System (ADS)

Sakka, Yoshio; Hirota, Noriyuki; Horii, Shigeru; Ando, Tsutomu

2009-07-01

The 3rd International Workshop on Materials Analysis and Processing in Materials Fields (MAP3) was held on 14-16 May 2008 at the University of Tokyo, Japan. The first was held in March 2004 at the National High Magnetic Field Laboratory in Tallahassee, USA. Two years later the second took place in Grenoble, France. MAP3 was held at The University of Tokyo International Symposium, and jointly with MANA Workshop on Materials Processing by External Stimulation, and JSPS CORE Program of Construction of the World Center on Electromagnetic Processing of Materials. At the end of MAP3 it was decided that the next MAP4 will be held in Atlanta, USA in 2010. Processing in magnetic fields is a rapidly expanding research area with a wide range of promising applications in materials science. MAP3 focused on the magnetic field interactions involved in the study and processing of materials in all disciplines ranging from physics to chemistry and biology: Magnetic field effects on chemical, physical, and biological phenomena Magnetic field effects on electrochemical phenomena Magnetic field effects on thermodynamic phenomena Magnetic field effects on hydrodynamic phenomena Magnetic field effects on crystal growth Magnetic processing of materials Diamagnetic levitation Magneto-Archimedes effect Spin chemistry Application of magnetic fields to analytical chemistry Magnetic orientation Control of structure by magnetic fields Magnetic separation and purification Magnetic field-induced phase transitions Materials properties in high magnetic fields Development of NMR and MRI Medical application of magnetic fields Novel magnetic phenomena Physical property measurement by Magnetic fields High magnetic field generation> MAP3 consisted of 84 presentations including 16 invited talks. This volume of Journal of Physics: Conference Series contains the proceeding of MAP3 with 34 papers that provide a scientific record of the topics covered by the conference with the special topics (13 papers) in the journal Science and Technology of Advanced Materials. All articles have been refereed by experts in the field. Both of these journals are fully accessible electronically and can be cited and referenced in the usual way. It is our hope that the reader will enjoy and profit from the MAP3 Proceedings. Hitoshi Wada (Kashiwa, Japan) Chair Eric Beaugon (Grenoble, France) Hans J Schneider-Muntau (Tallahassee, USA) Co-chair Advisory Board Shigeo Asai (Nagoya, Japan) Koichi Kitazawa (Tokyo, Japan) Mitsuhiro Motokawa (Sendai, Japan) Shoogo Ueno (Fukuoka, Japan) Robert Tournier (Grenoble, France) Justin Schwartz (Tallahassee, USA) J C Maan (Nijmegen, Netherland) Scientific Committee Yoshifumi Tanimoto (Hiroshima, Japan) Masuhiro Yamaguchi (Yokohama, Japan) Tsunehisa Kimura (Kyoto, Japan) Yoshio Sakka (Tsukuba Japan) Ryoichi Aogaki (Tokyo, Japan) Jyunji Miyakoshi (Hirosaki, Japan) Kazuo Watanabe (Sendai, Japan) James M Valles Jr. (Providence, USA) Joon Pyo Park (Pohang, Korea) Qiang Wang (Shenyang, China) Nicole Pamme (Hull, UK) Sophie Rivoirard (Grenoble, France) P C M Christianen (Nijmegen, Netherland) Local Organizing Committee Isao Yamamoto Masafumi Yamato Shigeru Horii Norihito Sogoshi Masateru Ikehata Noriyuki Hirota Tsutomu Ando Proceedings Editorial Board Yoshio Sakka Noriyuki Hirota Shigeru Horii Tsutomu Ando Conference photograph

EDITORIAL: Adaptive and Active Materials: Selected Papers from the ASME 2008 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 08) (Maryland, USA, 28-30 October 2008) Adaptive and Active Materials: Selected Papers from the ASME 2008 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 08) (Maryland, USA, 28-30 October 2008)

NASA Astrophysics Data System (ADS)

Lynch, Christopher

2009-10-01

The rapid development of the field of Smart Materials, Adaptive Structures, and Materials Systems led the Aerospace Division ASMS TC to launch the new annual SMASIS conference in 2008. The conference focuses on the multi-disciplinary challenges of developing new multifunctional materials and implementing them in advanced systems. The research spans length scales from nano-structured materials to civil, air, and space structures. The first conference consisted of six symposia, each focusing on a different research area. This special issue of Smart Materials and Structures summarizes some of the top research presented at the 2008 SMASIS conference in the materials-focused symposia. These symposia focused on the behavior and mechanics of active materials, on multifunctional materials, and on bio-inspired materials. The behavior and mechanics of active materials is an approach that combines observed material behavior with mechanism-based models that not only give insight into the observed behavior, but guide the development of new materials. This approach has been applied to shape memory metals and polymers, ferroelectrics, ferromagnetics, and recently to multiferroic materials, and has led to considerable improvements in our understanding of multi-field phenomena. Multifunctional materials are the next generation of active materials. These materials include structural, sensing, and actuation components integrated into a material system. A natural extension of multifunctional materials is a new class of bio-inspired materials. Bio-inspired materials range from detailed bio-mimicry of sensing and self healing materials to nano and microstructures that take advantage of features observed in biological systems. The Editors would like to express their sincere thanks to all of the authors for their contributions to this special issue on 'Adaptive and Active Materials' for Smart Materials and Structures. We convey our gratitude to all of the reviewers for their time and dedication. We thank IOP Publishing for their support and encouragement of this special issue and the staff for their special attention and timely response.

III International Conference on Laser and Plasma Researches and Technologies

NASA Astrophysics Data System (ADS)

2017-12-01

A.P. Kuznetsov and S.V. Genisaretskaya III Conference on Plasma and Laser Research and Technologies took place on January 24th until January 27th, 2017 at the National Research Nuclear University "MEPhI" (NRNU MEPhI). The Conference was organized by the Institute for Laser and Plasma Technologies and was supported by the Competitiveness Program of NRNU MEPhI. The conference program consisted of nine sections: • Laser physics and its application • Plasma physics and its application • Laser, plasma and radiation technologies in industry • Physics of extreme light fields • Controlled thermonuclear fusion • Modern problems of theoretical physics • Challenges in physics of solid state, functional materials and nanosystems • Particle accelerators and radiation technologies • Modern trends of quantum metrology. The conference is based on scientific fields as follows: • Laser, plasma and radiation technologies in industry, energetic, medicine; • Photonics, quantum metrology, optical information processing; • New functional materials, metamaterials, “smart” alloys and quantum systems; • Ultrahigh optical fields, high-power lasers, Mega Science facilities; • High-temperature plasma physics, environmentally-friendly energetic based on controlled thermonuclear fusion; • Spectroscopic synchrotron, neutron, laser research methods, quantum mechanical calculation and computer modelling of condensed media and nanostructures. More than 250 specialists took part in the Conference. They represented leading Russian scientific research centers and universities (National Research Centre "Kurchatov Institute", A.M. Prokhorov General Physics Institute, P.N. Lebedev Physical Institute, Troitsk Institute for Innovation and Fusion Research, Joint Institute for Nuclear Research, Moscow Institute of Physics and Tecnology and others) and leading scientific centers and universities from Germany, France, USA, Canada, Japan. We would like to thank heartily all of the speakers, participants, organizing and program committee members for their contribution to the conference.

Editorial Conference Comments by the General Chairman

NASA Astrophysics Data System (ADS)

Hopkins, M. A.

2009-12-01

This paper tells about the comments given by the general chairman in the 2009 conference at Quebec City's Hilton and convection centre in the province of Quebec, canada. NSREC is recoginized as one of the premier international conference on radiation effects in electronic materials, devices and systems. Also the radiation effects in microelectronic devices and materials are discussed. Reliability effects in electronic device is also given in the conference.

Proceedings of the 6. international conference on stability and handling of liquid fuels. Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Giles, H.N.

1998-12-01

Volume 1 of these proceedings contain 29 papers related to aviation fuels and long term and strategic storage. Studies investigated fuel contamination, separation processes, measurement techniques, thermal stability, compatibility with fuel system materials, oxidation reactions, and degradation during storage.

Kentucky Information Dissemination System. Fall Dissemination Conference Follow-Up.

ERIC Educational Resources Information Center

Kentucky State Dept. of Education, Frankfort. Office of Communication Services.

Describing a state conference on information dissemination held in November 1979 in Frankfort, Kentucky, this report contains conference materials and evaluations of the mini-seminars and awareness sessions conducted there. Materials include a final agenda, seminar and roundabout topics, a description of the Kentucky Department of Education…

Mobilizing Resources for Independent Living: A National Conference (New Orleans, Louisiana, August 5-7, 2002). Participant's Manual.

ERIC Educational Resources Information Center

Male, Richard; Schulz, Lee; Jones, Darrell Lynn; Buppapong, Raweewan; Langbehn, Kristy; George, Carri; Petty, Richard; Heinsohn, Dawn

The participant's manual contains training materials for a national conference on mobilizing resources and fund raising in agencies concerned with promoting independent living for people with disabilities. Preliminary materials include the conference agenda, background information about the trainers, organizational information on Independent…

[An examination of "Minamata disease general investigation and research liaison council"--The process of making uncertain the organic mercury causal theory].

PubMed

Nakano, Hiroshi

2010-01-01

Minamata disease occurred because inhabitants consumed the polluted seafood. The official confirmation of Minamata disease was in 1956. However, the material cause of that disease was uncertain at that time. The Minamata Food Poisoning Sub-committee, under authority of the Food Hygiene Investigation Committee of the Ministry of Health and Welfare, determined the material cause of Minamata disease to be a certain kind of organic mercury in 1959. The sub-committee was dissolved after their report. The discussion about the investigation of the cause was performed in a conference initiated by the Economic Planning Agency, which was titled "Minamata Disease General Investigation and Research Liaison Council". The Participants were eight scientists; four fishery scientists, two chemists, and only two medical scientists, which implied that only examination of the organic mercury was to be discussion. The conference was held four times from 1960 to 1961. In the first and second conferences, the organic mercury research from a medical perspective progressed in cooperation with fishery sciences. In the third conference, it was reported that UCHIDA Makio, professor of Kumamoto University, had found organic mercury crystal in the shellfish found in Minamata-bay. Authorities of biochemistry and medicine in the third conference criticized UCHIDA's research. At the fourth conference, reports contradicting his research were presented. Although those anti-UCHIDA reports were not verified, AKAHORI Shiro, the highest authority of biochemistry, not only accepted them, but also expressed doubt in the organic mercury causal theory. Therefore, this theory was recognized as uncertain.

PREFACE: 10th Joint Conference on Chemistry

NASA Astrophysics Data System (ADS)

2016-02-01

The 10th Joint Conference on Chemistry is an international conference organized by 4 chemistry departments of 4 universities in central Java, Indonesia. The universities are Sebelas Maret University, Diponegoro University, Semarang State University and Soedirman University. The venue was at Solo, Indonesia, at September 8-9, 2015. The total conference participants are 133 including the invited speakers. The conference emphasized the multidisciplinary chemical issue and impact of today's sustainable chemistry which covering the following topics: • Material innovation for sustainable goals • Development of renewable and sustainable energy based on chemistry • New drug design, experimental and theoretical methods • Green synthesis and characterization of material (from molecule to functionalized materials) • Catalysis as core technology in industry • Natural product isolation and optimization

Isolation of bacteriophages against non-O157 and O157 Shiga toxin-producing Escherichia coli (STEC) from composting of non-fecal materials and the potential impact on produce safety

USDA-ARS?s Scientific Manuscript database

Composting is a complex process to produce fertilizers used to improve crop yields. A complete composting process usually confers bactericidal effect due to change of temperature and pH However, some produce outbreaks associated with Shiga toxin-producing E. coli (STEC) contamination were linked to ...

PREFACE: 12th Europhysical Conference on Defects in Insulating Materials (EURODIM 2014)

NASA Astrophysics Data System (ADS)

Alfredsson, M. L.; Chadwick, A. V.; Jackson, R. A.; McCabe, E. E.

2015-04-01

The 12th Europhysical Conference on Defects in Insulating Materials (EURODIM14) was held at the University of Kent, UK, from 13-18 July 2014. It was attended by about 120 delegates from around the world, and featured 56 oral presentations and 77 posters. EURODIM14 followed other conferences in the series, held in Pecs (2010), Milan (2006) and Wroclaw (2002), as well as the related ICDIM conferences held in Santa Fe (2012), Aracaju (2008) and Riga (2004). These conferences all have the aim of bringing together scientists to discuss the chemistry and physics of defects in solids, and their role in determining material properties. We would like to thank the International Advisory Committee for suggesting invited speakers, and the Local and Programme Committee for their hard work in planning and running the conference. Finally we would like to thank the authors and referees for their contributions to the proceedings. M L Alfredsson (Conference Chair) A V Chadwick R A Jackson E E McCabe

Combinatorial materials approach to accelerate materials discovery for transportation (Conference Presentation)

NASA Astrophysics Data System (ADS)

Tong, Wei

2017-04-01

Combinatorial material research offers fast and efficient solutions to identify promising and advanced materials. It has revolutionized the pharmaceutical industry and now is being applied to accelerate the discovery of other new compounds, e.g. superconductors, luminescent materials, catalysts etc. Differing from the traditional trial-and-error process, this approach allows for the synthesis of a large number of compositionally diverse compounds by varying the combinations of the components and adjusting the ratios. It largely reduces the cost of single-sample synthesis/characterization, along with the turnaround time in the material discovery process, therefore, could dramatically change the existing paradigm for discovering and commercializing new materials. This talk outlines the use of combinatorial materials approach in the material discovery in transportation sector. It covers the general introduction to the combinatorial material concept, state of art for its application in energy-related research. At the end, LBNL capabilities in combinatorial materials synthesis and high throughput characterization that are applicable for material discovery research will be highlighted.

Magnetic Field-Induced Phase Transformation in Magnetic Shape Memory Alloys with High Actuation Stress and Work Output

DTIC Science & Technology

2010-05-03

Mechanisms for Advanced Properties in Phase Transforming Materials , Materials Science & Technology 2009 Conference, October 25-29, 2009, Pittsburgh, PA...Advanced Properties in Phase Transforming Materials , Materials Science & Technology 2009 Conference, October 25-29, 2009, Pittsburgh, PA, 2009. 11...observed materials behavior. Indeed, measured materials properties were found not to be the exact indication of the materials real response

Preface of 16th International conference on Defects, Recognition, Imaging and Physics in Semiconductors

NASA Astrophysics Data System (ADS)

Yang, Deren; Xu, Ke

2016-11-01

The 16th International conference on Defects-Recognition, Imaging and Physics in Semiconductors (DRIP-XVI) was held at the Worldhotel Grand Dushulake in Suzhou, China from 6th to 10th September 2015, around the 30th anniversary of the first DRIP conference. It was hosted by the Suzhou Institute of Nano-tech and Nano-bionics (SINANO), Chinese Academy of Sciences. On this occasion, about one hundred participants from nineteen countries attended the event. And a wide range of subjects were addressed during the conference: physics of point and extended defects in semiconductors: origin, electrical, optical and magnetic properties of defects; diagnostics techniques of crystal growth and processing of semiconductor materials (in-situ and process control); device imaging and mapping to evaluate performance and reliability; defect analysis in degraded optoelectronic and electronic devices; imaging techniques and instruments (proximity probe, x-ray, electron beam, non-contact electrical, optical and thermal imaging techniques, etc.); new frontiers of atomic-scale-defect assessment (STM, AFM, SNOM, ballistic electron energy microscopy, TEM, etc.); new approaches for multi-physic-parameter characterization with Nano-scale space resolution. Within these subjects, there were 58 talks, of which 18 invited, and 50 posters.

Editorial

NASA Astrophysics Data System (ADS)

Wang, Tianmin; Gao, Fei; Hu, Wangyu; Lai, Wensheng; Lu, Guang-Hong; Zu, Xiaotao

2009-09-01

The Ninth International Conference on Computer Simulation of Radiation Effects in Solids (COSIRES 2008) was hosted by Beihang University in Beijing, China from 12 to 17 October 2008. Started in 1992 in Berlin, Germany, this conference series has been held biennially in Santa Barbara, CA, USA (1994); Guildford, UK (1996); Okayama, Japan (1998); State College, PA, USA (2000); Dresden, Germany (2002); Helsinki Finland (2004); and Richland, WA USA (2006). The COSIRES conferences are the foremost international forum on the theory, development and application of advanced computer simulation methods and algorithms to achieve fundamental understanding and predictive modeling of the interaction of energetic particles and clusters with solids. As can be noticed in the proceedings of the COSIRES conferences, these computer simulation methods and algorithms have been proven to be very useful for the study of fundamental radiation effect processes, which are not easily accessible by experimental methods owing to small time and length scales. Moreover, with advance in computing power, they have remarkably been developed in the different scales ranging from meso to atomistic, and even down to electronic levels, as well as coupling of the different scales. They are now becoming increasingly applicable for materials processing and performance prediction in advance engineering and energy-production technologies.

Resonance Meeting, May 11-15, 1997, Asilomar Conference Center, Pacific Grove, CA. Volume 2. Transparencies

DTIC Science & Technology

1997-05-01

air and in water Brian T. Hefner and Phillip L. Marston 340 Material property measurements via GHz interferometry H. Spetzler, et al. PAGE 361...temperature scale Michael R. Moldover 464 Cheap acoustic gas analyzers Matthew Golden, et al. 502 Measurements of relaxation processes in gases and Henry E... expected behavior based on measurements of earth materials. Birch (4) first proposed a simple linear relation between compressional velocity and

European Conference on Advanced Materials and Processes Held in Aachen, Federal Republic of Germany on November 22-24 1989. Abstracts

DTIC Science & Technology

1989-11-24

However, the combination of increasing circuit complexity, customization, size, speed and heat flux is leading to a crisis in packaging technology(1...material properties and tooling restrictions, * production by an economic single-step sintering technique with subsequent heat treatment, * achievement of...programme, page 16. Numerical Mlodelling of Heat Transfer at Interfaces: Finite Element Approaches, Testing and Examples I W. Schafer, MAGM

PREFACE: XV International Conference on Electrical Bio-Impedance (ICEBI) & XIV Conference on Electrical Impedance Tomography (EIT)

NASA Astrophysics Data System (ADS)

Pliquett, Uwe

2013-04-01

Over recent years advanced measurement methods have facilitated outstanding achievements not only in medical instrumentation but also in biotechnology. Impedance measurement is a simple and innocuous way to characterize materials. For more than 40 years biological materials, most of them based on cells, have been characterized by means of electrical impedance for quality control of agricultural products, monitoring of biotechnological or food processes or in health care. Although the list of possible applications is long, very few applications successfully entered the market before the turn of the century. This was, on the one hand, due to the low specificity of electrical impedance with respect to other material properties because it is influenced by multiple factors. On the other hand, equipment and methods for many potential applications were not available. With the appearance of microcontrollers that could be easily integrated in applications at the beginning of the 1980s, impedance measurement advanced as a valuable tool in process optimization and lab automation. However, established methods and data processing were mostly used in a new environment. This has changed significantly during the last 10 years with a dramatic growth of the market for medical instrumentation and also for biotechnological applications. Today, advanced process monitoring and control require fast and highly parallel electrical characterization which in turn yields incredible data volumes that must be handled in real time. Many newer developments require miniaturized but precise sensing methods which is one of the main parts of Lab-on-Chip technology. Moreover, biosensors increasingly use impedometric transducers, which are not compatible with the large expensive measurement devices that are common in the laboratory environment. Following the achievements in the field of bioimpedance measurement, we will now witness a dramatic development of new electrode structures and electronics. Structures down to sub-micrometer range and complex impedance measurements tools integrated at single chips are now affordable. Moreover, the introduction of alternative signals and data processing algorithms focuses on very fast and parallel electrical characterization which in turn pushes this technique to new applications and markets. Electrical impedance tomography today yields pictures in real time with a resolution that was impossible 10 years ago. The XVth International Conference on Electrical Bio-Impedance in conjunction with the XIVth Electrical Impedance Tomography ICEBI/EIT 2013 organized by the Institute for Bioprocessing and Analytical Measurement Techniques, Heilbad Heiligenstadt, Germany, together with the EIT-group at the University of Göttingen, Germany, brings world leading scientists in these fields together. It is a platform to present the latest developments in instrumentation and signal processing but also points to new applications, especially in the field of biosensors and non-linear phenomena. Two Keynote lectures will extend the view of the participants above the mainstream of bio-impedance measurement. Friederich Kremer (University of Leipzig) delivers the plenary lecture on broad bandwidth dielectric spectroscopy. New achievements in the research of ligand gated ionic channels will be presented by Klaus Benndorf (University of Jena). Leading scientists in the field of bio-impedance measurement, such as, Sverre Grimnes, Orjan Martinsen, Andrea Robitzki, Richard Bayford, Jan Gimsa and Mart Min will give lectures for students but also more experienced scientists in a pre-conference tutorial which is a good opportunity to learn or refresh the basics. List of committees Conference Chair Dr Uwe Pliquett Professor Dieter Beckmann Institut für Bioprozess- und Analysenmesstechnik eV, Rosenhof, Heilbad Heiligenstadt, Germany Technical Program Chair Maik Hiller Conventus Congressmanagement & Marketing GmbH, Carl-Pulfrich-Str. 1 - 07745 Jena Pre-Conference Tutorial Coordinator Uwe Pliquett International Advisory committee Kenneth R Foster, USA Sverre Grimnes, Norway David Holder, UK Alexander V Korjenewski, Russia Ørjan G Martinsen, Norway Mart Min, Estonia Stig Ollmar, Sweden Tadeusz Palko, Poland Pere J Riu, Spain Andrea Robitzki, Germany Hermann Scharfetter, Austria Leigh C Ward, Australia Conference logo Conference logo Sponsor logos Sponsor logos

2012 Gordon Research Conference on Bioinspired Materials - Formal Schedule and Speaker/Poster Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chilkoti, Ashutosk

2012-06-29

The emerging, interdisciplinary field of Bioinspired Materials focuses on developing a fundamental understanding of the synthesis, directed self-assembly and hierarchical organization of natural occurring materials, and uses this understanding to engineer new bioinspired artificial materials for diverse applications. The inaugural 2012 Gordon Conference on Bioinspired Materials seeks to capture the excitement of this burgeoning field by a cutting-edge scientific program and roster of distinguished invited speakers and discussion leaders who will address the key issues in the field. The Conference will feature a wide range of topics, such as materials and devices from DNA, reprogramming the genetic code for designmore » of new materials, peptide, protein and carbohydrate based materials, biomimetic systems, complexity in self-assembly, and biomedical applications of bioinspired materials.« less

Making News: How the IL Movement Cultivates Media Relationships--A National Conference (Oklahoma City, Oklahoma, October 16-18, 2002). Participant's Manual.

ERIC Educational Resources Information Center

Burnett, Jennifer; Kemp, Janine Bertram; Williams, Brad; Jones, Darrell Lynn; Buppapong, Raweewan; Langbehn, Kristy; Petty, Richard; Heinsohn, Dawn

The participant's manual contains training materials for a national conference on cultivating media relations in agencies concerned with independent living for people with disabilities. Preliminary materials include the conference agenda, background information about the trainers, organizational information on Independent Living Research…

Recent developments in materials and detectors for the infrared; Proceedings of the Meeting, Cannes, France, November 25, 26, 1985

NASA Technical Reports Server (NTRS)

Morten, F. D. (Editor); Seeley, John S. (Editor)

1986-01-01

The present conference on advancements in IR-sensitive materials and detector technologies employing them gives attention to thermal detectors, focal plane array processing detectors, novel detector designs, general properties of IR optics materials, and preparation methods for such materials. Specific topics encompass the fabrication of InSb MIS structures prepared by photochemical vapor deposition, IR heterodyne detectors employing cadmium mercury telluride, low microphony pyroelectric arrays, IR detection based on minority carrier extrusion, longwave reststrahl in IR crystals, and molecular beam techniques for optical thin film fabrication.

Investigation of Friction Stir Welding of Al Metal Matrix Composite Materials

NASA Technical Reports Server (NTRS)

Diwan, Ravinder M.

2003-01-01

The innovative process of Friction Stir Welding (FSW) has generated tremendous interest since its inception about a decade or so ago since the first patent in 1991 by TWI of Cambridge, England. This interest has been seen in many recent international conferences and publications on the subject and relevant published literature. Still the process needs both intensive basic study of deformation mechanisms during this FSW process and analysis and feasibility study to evaluate production methods that will yield high quality strong welds from the stirring action of the appropriate pin tool into the weld plate materials. Development of production processes is a complex task that involves effects of material thickness, materials weldability, pin tool design, pin height, and pin shoulder diameter and related control conditions. The frictional heating with rotational speeds of the pin tool as it plunges into the material and the ensuing plastic flow arising during the traverse of the welding faying surfaces provide the known special advantages of the FSW process in the area of this new advanced joining technology.

PREFACE: 16th Russian Youth Conference on Physics and Astronomy (PhysicA.SPb/2013)

NASA Astrophysics Data System (ADS)

2014-12-01

The sixteenth Russian Conference on Physics and Astronomy PhysicA.SPb was held 23-24 October 2013 in Saint-Petersburg, Russia. The Conference continues the tradition of Saint-Petersburg Seminars on Physics and Astronomy originating from mid-90s. Since then PhysicA.SPb maintains both scientific and educational quality of contributions delivered to the young audience. This is the main feature of the Conference that makes it possible to combine the whole spectrum of modern Physics and Astronomy within one event. PhysicA.SPb/2013 has brought together about 200 students, young scientists and their colleague professors from many universities and research institutes across whole Russia as well as from Belarus, Ukraine, Switzerland, Turkey, Finland and France. Oral and poster presentations were combined into a few well-defined sections among which one should name Astronomy and Astrophysics, Plasma physics, hydro- and aero-dynamics, Physics of quantum-sized structures, Nanostructured and thin-film materials, Biophysics, THz and UHF materials and devices, Optoelectronic devices, Optics and spectroscopy, Atomic and elementary particles physics, Defects and impurities in solid state, Physics and technology of the alternative energetics. This issue of the Journal of Physics: Conference Series presents the extended contributions from participants of PhysicA.SPb/2013 that were peer-reviewed by expert referees through processes administered by the Presiders of the Organising and Programme Committees to the best professional and scientific standards. The Editors: Nikita S. Averkiev, Sergey A. Poniaev and Grigorii S. Sokolovskii

European Software Engineering Process Group Conference (2nd Annual), EUROPEAN SEPG󈨥. Delegate Material, Tutorials

DTIC Science & Technology

1997-06-17

There is Good and Bad News With CMMs8 *bad news: process improvement takes time *good news: the first benefit Is better schedule management With PSP s...e g similar supp v EURO not sudden death toolset for assessment and v EURO => Business benefits detailed analysis) . EURO could collapse (low risk...from SPI live on even after year 2000. Priority BENEFITS Actions * Improved management and application development processes * Strengthened Change

PREFACE: Functional materials and nanotechnologies (FM&NT-2007)

NASA Astrophysics Data System (ADS)

Sternberg, Andris; Muzikante, Inta

2007-06-01

The International Baltic Sea Region conference Functional Materials and Nanotechnologies (FM&NT-2007) was held in Riga, 2-4 April 2007 in the Institute of Solid State Physics, University of Latvia (ISSP LU). The conference was organized in co-operation with projects ERANET 'MATERA' and EUREKA 'BIONANOCOMPOSITE'. The purpose of the conference was to bring together scientists, engineers and students from universities, research institutes and related industrial companies active in the field of advanced material science and materials technologies trends and future activities. Scientific themes covered in the conference are:

2011 Superconductivity Centennial Conference - EUCAS-ISEC-ICMC

NASA Astrophysics Data System (ADS)

Rogalla, Horst

2012-11-01

In 2011 a Centennial Conference was organized in the "World Forum" Conference Center in Den Haag, the Netherlands, celebrating the discovery of Superconductivity by Heike Kamerlingh Onnes and his group 100 years ago in Leiden in the Netherlands. They found superconductivity in pure mercury after successfully liquefying helium for which Kamerlingh Onnes received a Nobel Prize in 1913. Since then superconductivity has been in the vivid focus of fundamental solid state physics, applied sciences and engineering in a very active community which already in 2005 came forward with the request to organize a Centennial Conference. Horst Rogalla and Dick Veldhuis from the University of Twente and Peter Kes from the University of Leiden took over the task to organize this conference in cooperation with three international conferences, the European Conference on Applied Superconductivity (EUCAS), the International Superconducting Electronics Conference (ISEC) and the International Cryogenic Materials Conference (ICMC). All three are biannual conferences with quite a long history in superconductivity, its applications and its materials.

Report on the WPI Conference: General Chemistry and Materials Science: The Interrelationships

NASA Astrophysics Data System (ADS)

Beall, Herbert

1996-08-01

Of the recent accomplishments of chemistry, some of the most spectacular have been in the area of materials. New miracle materials have revolutionized our lives in almost every aspect from semiconductors to metallic eyeglass frames that return to a "memorized" shape when bent. However, materials receive surprisingly little attention as examples of chemical phenomena in fundamental chemistry classes, which are still built largely on the behavior of gases and liquids. These issues were the basis for the Ninth Annual Worcester Polytechnic Institute Conference on Chemical Education. This article addresses the conference and the issues.

As the Child Reads: The Treatment of Minorities in Textbooks and Other Teaching Materials. Conference Report, National NEA-PR&R Conference on Civil and Human Rights in Education (Washington, D. C., February 8-10, 1967).

ERIC Educational Resources Information Center

Hart, Elinor, Ed.

The conference on "The Treatment of Minorities in Textbooks and Other Teaching Materials" was held on February 8-10, 1967 in Washington, D.C. It was sponsored by the National Education Association and the Committee on Civil and Human Rights of Educators of the Commission on Professional Rights and Responsibilities. Attending the conference were…

Focus issue on the Study of Matter at Extreme Conditions

NASA Astrophysics Data System (ADS)

Saini, Naurang L.; Saxena, Surendra K.; Bansil, Arun

2015-09-01

Study of matter at extreme conditions encompasses many different approaches for understanding the physics, chemistry and materials science underlying processes, products and technologies important for society. Although extreme conditions have been associated traditionally with research in areas of geology, mineral and earth sciences, the field has expanded in the recent years to include work on energy related materials and quantum functional materials from hard to soft matter. With the motivation to engage a large number of scientists with various disciplinary interests, ranging from physics, chemistry, geophysics to materials science, the study of matter at extreme conditions has been the theme of a series of conferences hosted by the High Pressure Science Society of America (HiPSSA) and the Center for the Study of Matter at Extreme Conditions (CeSMEC) of Florida International University (FIU), Miami. These SMEC (Study of Matter at Extreme Conditions) conferences are aimed at providing a unique platform for leading researchers to meet and share cutting-edge developments, and to bridge established fields under this interdisciplinary umbrella for research on materials. The seventh meeting in the SMEC series was held during March 23-30, 2013, while sailing from Miami to the Caribbean Islands, and concluded with great enthusiasm.

PREFACE: International Conference on Advanced Structural and Functional Materials Design 2008

NASA Astrophysics Data System (ADS)

Kakeshita, Tomoyuki

2009-07-01

The Ministry of Education, Culture, Sports, Science and Technology of Japan started the Priority Assistance for the Formation of Worldwide Renowned Centers of Research - Global COE Program. This program is based on the competitive principle where a third party evaluation decides which program to support and to give priority support to the formation of world-class centers of research. Our program Center of Excellence for Advanced Structural and Functional Materials Design was selected as one of 13 programs in the field of Chemistry and Materials Science. This center is composed of two materials-related Departments in the Graduate School of Engineering: Materials and Manufacturing Science and Adaptive Machine Systems, and 4 Research Institutes: Center for Atomic and Molecular Technologies, Welding and Joining Research Institute, Institute of Scientific and Industrial Research and Research Center for Ultra-High Voltage Electron Microscopy. Recently, materials research, particularly that of metallic materials, has specialized only in individual elemental characteristics and narrow specialty fields, and there is a feeling that the original role of materials research has been forgotten. The 6 educational and research organizations which make up the COE program cooperatively try to develop new advanced structural and functional materials and achieve technological breakthrough for their fabrication processes from electronic, atomic, microstructural and morphological standpoints, focusing on their design and application: development of high performance structural materials such as space plane and turbine blades operating under a severe environment, new fabrication and assembling methods for electronic devices, development of evaluation technique for materials reliability, and development of new biomaterials for regeneration of biological hard tissues. The aim of this international conference was to report the scientific progress in our Global COE program and also to discuss related research topics. The organizing committee gratefully thanks participants for presenting their recent results and for discussions with our COE members and international attendees. November 2008 Professor Tomoyuki Kakeshita Chairman of the Conference Vice Dean, Graduate School of Engineering, Osaka University, Division of Materials and Manufacturing Science, Graduate School of Engineering Leader of Global COE Program, Osaka University, ''Center of Excellence for Advanced Structural and Functional Materials Design'' Organization Chairman: T Kakeshita (Osaka University) Advisory Board:H Mehrer (University Münster, Germany), E K H Salje (University of Cambridge, United Kingdom), H-E Schaefer (University of Stuttgart, Germany), P Veyssiere (CNRS-ONERA, France) Organizing Committee: T Kakeshita, H Araki, H Fujii, S Fujimoto, Y Fujiwara, A Hirose, S Kirihara, M Mochizuki, H Mori, T Nagase, H Nakajima, T Nakano, R Nakatani, K Nogi, Y Setsuhara, Y Shiratsuchi, T Tanaka, T Terai, H Tsuchiya, N Tsuji, H Utsunomiya, H Yasuda, H Yasuda (Osaka University) Executive Committee: T Kakeshita, S Fujimoto, Y Fujiwara, A Hirose, T Tanaka, H Yasuda (Osaka University) Conference Secretariat: Y Fujiwara (Osaka University) Proceedings Editors: T Kakeshita and Y Fujiwara (Osaka University) Conference photograph

2014 Global Conference on Polymer and Composite Materials (PCM 2014)

NASA Astrophysics Data System (ADS)

2014-08-01

The 2014 Global Conference on Polymer and Composite Materials (PCM 2014) sponsored by Ningbo Adhesives and Products Industry Association, Shanghai Bonding Technology Association, Zhejiang Bonding Technology Association, Wuhan Bonding Technology Association, Hebei Bonding and Coatings Association and Polyurethane Industry Association was held from May 27 to May 29 2014 in Ningbo, China. The technical program consisted of 8 international keynote speakers, oral presentations, and a poster session. The conference also included an industrial exhibition where more than 50 companies displayed in their booths their most recent advanced products and services. The present issue of IOP Conference Series: Materials Science and Engineering (MSE) records the proceedings of PCM 2014 and contains 37 specially selected manuscripts submitted to PCM2014 conference. The electronic submission and handling of manuscripts via the conference website, including the selection of reviewers and evaluation of manuscripts, were identical to the procedures applied to manuscripts submitted as regular contributions for publication. The organization of this conference and the preparation of proceedings volumes would have been impossible without the tremendous efforts and dedication of many individuals, especially from Ms. Yin Pan, who oversaw the organization of the conference and the program; and a large team of reviewers with their timely submission of quality reports. We express our sincere thanks to all authors and presenters for their contributions. We also thank very much our sponsors for their generous support. The 2015 Global Conference on Polymer and Composite Materials (PCM2015) will be held in Beijing, China on May 16-18, 2015. Beijing, the capital of the People's Republic of China and one of the most populous cities in the world, will welcome to all participants for a renewed and vibrant conference. Prof. Dr. Esteban Broitman Linköping University, Sweden Editor in Chief — PCM2014

76 FR 24495 - Reprocessing of Reusable Medical Devices; Public Workshop

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-02

... workshop will be held in the Great Room at the FDA White Oak Conference Center, Bldg. 31, Rm. 1503, 10903... requests to make oral presentations, as well as presentation materials, must be sent to the contact person... sterilization process, potentially resulting in HAIs or other adverse patient outcomes. FDA receives reports of...

Chemical Engineering Curricula for the Future: Synopsis of Proceedings of a U.S.-India Conference, January, 1988.

ERIC Educational Resources Information Center

Ramkrishna, D.; And Others

1989-01-01

This is a summary of a seminar for changing the undergraduate chemical engineering curriculum in India. Identifies and describes biotechnology, materials for structural and microelectronic catalysis, and new separation processes as emerging areas. Evaluates the current curriculum, including basic science, engineering lore, chemical engineering,…

Preface: Special issue featuring papers from the International Conference on Nonequilibrium Carrier Dynamics in Semiconductors

NASA Astrophysics Data System (ADS)

Reggiani, L.; Bordone, P.; Brunetti, R.

2004-02-01

The International Conference on Nonequilibrium Carrier Dynamics in Semiconductors (HCIS-13) celebrates 30 years since it first took place in Modena. Nonequilibrium dynamics of charge carriers, pioneered by the hot-electron concept, is an important issue for understanding electro-optic transport properties in semiconductor materials and structures. In these 30 years several topics have matured, and new ones have emerged thus fertilizing the field with a variety of physical problems and new ideas. The history of the conference is summarized in the opening paper `30 years of HCIS'. The future of the conference seems secure considering the continued lively interest of the participants. The conference addressed eleven major topics which constitute the backbone of the proceedings and are summarized as follows: carrier transport in low dimensional and nanostructure systems, nonequilibrium carriers in superlattices and devices, small devices and related phenomena, carrier dynamics and fluctuations, carrier quantum dynamics, coherent/incoherent carrier dynamics of optical excitations and ultra-fast optical phenomena, nonlinear optical effects, transport in organic matter, semiconductor-based spintronics, coherent dynamics in solid state systems for quantum processing and communication, novel materials and devices. Nanometric space scale and femtosecond time scale represent the ultimate domains of theoretical, experimental and practical interest. Traditional fields such as bulk properties, quantum transport, fluctuations and chaotic phenomena, etc, have received thorough and continuous attention. Emerging fields from previous conferences, such as quantum processing and communication, have been better assessed. New fields, such as spintronics and electron transport in organic matter, have appeared for the first time. One plenary talk, 11 invited talks, 230 submitted abstracts covering all these topics constituted a single-session conference. Following scientific selection through the Advisory and Program Committees and peer review, 162 papers were selected for publication by the Institute of Physics Publishing in this special issue of Semiconductor Science and Technology. The financial support that allowed conference organization and helped researchers with budget difficulties to attend came from the following institutions which are gratefully acknowledged: Office of Naval Research (ONR), Defense Advanced Research Project Agency (DARPA), Office of Naval Research International Field Office (ONRIFO), International Union of Pure and Applied Physics (IUPAP), Italian Ministry of Education University and Research (MIUR), National Institute for the Physics of Matter (INFM), University of Modena and Reggio Emilia, Dipartimento di Ingegneria dell’ Innovazione of the Lecce University. Finally, sincere thanks are addressed to the technical staff who provided assistance during the conference: G Angelone, M Benassi, F Grossi, M Leuzzi, A Magnani, S Montanto, L Zagni and D Zanfi. The staff of the University Press Office together with F Goggi and N Minto are acknowledged for their excellent job in printing the conference documents.

Annotated Bibliography. Conference Materials: Strategy Conference on Education and the Economy (Washington, D.C., September 22-24, 1981).

ERIC Educational Resources Information Center

Center for Law and Education, Boston, MA.

The 22 items included in a packet distributed to participants at a 1981 conference on education and the economy are listed in this annotated bibliography, with sources for the items identified. The materials include articles, chapters from books, and monographs, as well as a resource guide and bibliography concerning rural economic and community…

Materials processing in space bibliography

NASA Technical Reports Server (NTRS)

Pentecost, E. (Compiler)

1982-01-01

Literature dealing with flight experiments utilizing a low gravity environment to elucidate and control various processes or with ground based activities that provide supporting research is listed. Included are Government reports, contractor reports, conference proceedings, and journal articles. Subdivisions of the bibliography include the five categories: crystal growth; metals, alloys, and composites, fluids and transport; glasses and ceramics; and Ultrahigh Vacuum and Containerless Processing Technologies, in addition to a list of patents and a compilation of anonymously authored collections and reports and a cross reference index.

PREFACE: 21th International Conference for Students and Young Scientists: Modern Technique and Technologies (MTT'2015)

NASA Astrophysics Data System (ADS)

2015-10-01

Involving young researchers in the scientific process, and allowing them to gain scientific experience, are important issues for scientific development. The International Conference for Students and Young Scientists ''Modern Technique and Technologies'' is one of a number of scientific events, held at National Research Tomsk Polytechnic University aimed at training and forming the scientific elite. During previous years the conference established itself as a serious scientific event at an international level, attracting members which annually number about 400 students and young scientists from Russia and near and far abroad. An important indicator of this scientific event is the large number of scientific areas covered, such as power engineering, heat power engineering, electronic devices for monitoring and diagnostics, instrumentation, materials and technologies of new generations, methods of research and diagnostics of materials, automatic control and system engineering, physical methods science and engineering, design and artistic aspects of engineering, social and humanitarian aspects of engineering. The main issues, which are discussed at the conference by young researchers, are connected with analysis of contemporary problems, application of new techniques and technologies, and consideration of their relationship. Over the years, the conference committee has gained a lot of experience in organizing scientific meetings. There are all the necessary conditions: the staff of organizers includes employees of Tomsk Polytechnic University; the auditoriums are equipped with modern demonstration and office equipment; leading scientists are TPU professors; the status of the Tomsk Polytechnic University as a leading research university in Russia also plays an important role. All this allows collaboration between leading scientists from all around the world, who are annually invited to give lectures at the conference. The editorial board expresses gratitude to the Administration of Tomsk Polytechnic University (TPU Rector, Professor P.S. Chubik and Vice Rector for Research and Innovation, Professor A.N. Dyachenko) for financial support of the conference. Also, we heartily thank both chairmen of the conference sections and the organizing committee's members for the great, effective, creative work in organizing and developing the conference as well as a significant contribution to the safeguarding and replenishment of the intellectual potential of Russia.

Proceedings of the Spacecraft Charging Technology Conference

NASA Technical Reports Server (NTRS)

Pike, C. P. (Editor); Lovell, R. R. (Editor)

1977-01-01

Over 50 papers from the spacecraft charging conference are included on subjects such as: (1) geosynchronous plasma environment, (2) spacecraft modeling, (3) spacecraft materials characterization, (4) spacecraft materials development, and (5) satellite design and test.

PREFACE: 2nd International Conference on Innovative Materials, Structures and Technologies

NASA Astrophysics Data System (ADS)

Ručevskis, Sandris

2015-11-01

The 2nd International Conference on Innovative Materials, Structures and Technologies (IMST 2015) took place in Riga, Latvia from 30th September - 2nd October, 2015. The first event of the conference series, dedicated to the 150th anniversary of the Faculty of Civil Engineering of Riga Technical University, was held in 2013. Following the established tradition, the aim of the conference was to promote and discuss the latest results of industrial and academic research carried out in the following engineering fields: analysis and design of advanced structures and buildings; innovative, ecological and energy efficient building materials; maintenance, inspection and monitoring methods; construction technologies; structural management; sustainable and safe transport infrastructure; and geomatics and geotechnics. The conference provided an excellent opportunity for leading researchers, representatives of the industrial community, engineers, managers and students to share the latest achievements, discuss recent advances and highlight the current challenges. IMST 2015 attracted over 120 scientists from 24 countries. After rigorous reviewing, over 80 technical papers were accepted for publication in the conference proceedings. On behalf of the organizing committee I would like to thank all the speakers, authors, session chairs and reviewers for their efficient and timely effort. The 2nd International Conference on Innovative Materials, Structures and Technologies was organized by the Faculty of Civil Engineering of Riga Technical University with the support of the Latvia State Research Programme under the grant agreement "INNOVATIVE MATERIALS AND SMART TECHNOLOGIES FOR ENVIRONMENTAL SAFETY, IMATEH". I would like to express sincere gratitude to Juris Smirnovs, Dean of the Faculty of Civil Engineering, and Andris Chate, manager of the Latvia State Research Programme. Finally, I would like to thank all those who helped to make this event happen. Special thanks go to Diana Bajare, Laura Sele, Liga Radina and Jana Galilejeva for their major contribution to organizing the conference and to the literary editor Tatjana Smirnova and technical editor Daira Erdmane for their hard work on the conference proceedings.

PREFACE: Proceedings of the 2nd International Conference on Quantum Simulators and Design (Tokyo, Japan, 31 May-3 June 2008) Proceedings of the 2nd International Conference on Quantum Simulators and Design (Tokyo, Japan, 31 May-3 June 2008)

NASA Astrophysics Data System (ADS)

Akai, Hisazumi; Tsuneyuki, Shinji

2009-02-01

This special issue of Journal of Physics: Condensed Matter comprises selected papers from the proceedings of the 2nd International Conference on Quantum Simulators and Design (QSD2008) held in Tokyo, Japan, between 31 May and 3 June 2008. This conference was organized under the auspices of the Development of New Quantum Simulators and Quantum Design Grant-in-Aid for Scientific Research on Priority Areas, Ministry of Education, Culture, Sports, Science and Technology of Japan (MEXT). The conference focused on the development of first principles electronic structure calculations and their applications. The aim was to provide an opportunity for discussion on the progress in computational materials design and, in particular, the development of quantum simulators and quantum design. Computational materials design is a computational approach to the development of new materials. The essential ingredient is the use of quantum simulators to design a material that meets a given specification of properties and functionalities. For this to be successful, the quantum simulator should be very reliable and be applicable to systems of realistic size. During the conference, new methods of quantum simulation and quantum design were discussed including methods beyond the local density approximation of density functional theory, order-N methods, methods dealing with excitations and reactions, and the application of these methods to the design of novel materials, devices and systems. The conference provided an international forum for experimental and theoretical researchers to exchange ideas. A total of 220 delegates from eight countries participated in the conference. There were 13 invited talks, ten oral presentations and 120 posters. The 3rd International Conference on Quantum Simulators and Design will be held in Germany in the autumn of 2011.

Practicing safe cell culture: applied process designs for minimizing virus contamination risk.

PubMed

Kiss, Robert D

2011-01-01

CONFERENCE PROCEEDING Proceedings of the PDA/FDA Adventitious Viruses in Biologics: Detection and Mitigation Strategies Workshop in Bethesda, MD, USA; December 1-3, 2010 Guest Editors: Arifa Khan (Bethesda, MD), Patricia Hughes (Bethesda, MD) and Michael Wiebe (San Francisco, CA) Genentech responded to a virus contamination in its biologics manufacturing facility by developing and implementing a series of barriers specifically designed to prevent recurrence of this significant and impactful event. The barriers included steps to inactivate or remove potential virus particles from the many raw materials used in cell culture processing. Additionally, analytical testing barriers provided protection of the downstream processing areas should a culture contamination occur, and robust virus clearance capability provided further assurance of virus safety should a low level contamination go undetected. This conference proceeding will review Genentech's approach, and lessons learned, in minimizing virus contamination risk in cell culture processes through multiple layers of targeted barriers designed to deliver biologics products with high success rates.

Proceedings of the 20th International Conference on Ion Beam Modification of Materials (IBMM 2016)

NASA Astrophysics Data System (ADS)

Kennedy, John; Elliman, Robert; Mccallum, Jeffrey; Ionescu, Mihail; Markwitz, Andreas

2017-10-01

The papers in this issue of NIMB were presented at the 20th international conference on Ion Beam Modification of Materials (IBMM) held at Te Papa Museum, Wellington, New Zealand from October 30th until November 4th, 2016. This conference continued the proud legacy of New Zealand-born Lord Rutherford and his pioneering research in ion beam physics.

PREFACE: 2nd National Conference on Nanotechnology 'NANO 2008'

NASA Astrophysics Data System (ADS)

Czuba, P.; Kolodziej, J. J.; Konior, J.; Szymonski, M.

2009-03-01

This issue of Journal of Physics: Conference Series contains selected papers presented at the 2nd National Conference on Nanotechnology 'NANO2008', that was held in Kraków, Poland, 25-28 June 2008. It was organized jointly by the Polish Chemical Society, Polish Physical Society, Polish Vacuum Society, and the Centre for Nanometer-scale Science and Advanced Materials (NANOSAM) of the Jagiellonian University. The meeting presentations were categorized into the following topics: 1. Nanomechanics and nanotribology 2. Characterization and manipulation in nanoscale 3. Quantum effects in nanostructures 4. Nanostructures on surfaces 5. Applications of nanotechnology in biology and medicine 6. Nanotechnology in education 7. Industrial applications of nanotechnology, presentations of the companies 8. Nanoengineering and nanomaterials (international sessions shared with the fellows of Maria-Curie Host Fellowships within the 6th FP of the European Community Project 'Nano-Engineering for Expertise and Development, NEED') 9. Nanopowders 10. Carbon nanostructures and nanosystems 11. Nanoelectronics and nanophotonics 12. Nanomaterials in catalysis 13. Nanospintronics 14. Ethical, social, and environmental aspects of nanotechnology The Conference was attended by 334 participants. The presentations were delivered as 7 invited plenary lectures, 25 invited topical lectures, 78 oral and 108 poster contributions. Only 1/6 of the contributions presented during the Conference were submitted for publication in this Proceedings volume. From the submitted material, this volume of Journal of Physics: Conference Series contains 37 articles that were positively evaluated by independent referees. The Organizing Committee gratefully acknowledges all these contributions. We also thank all the referees of the papers submitted for the Proceedings for their timely and thorough work. We would like to thank all members of the National Program Committee for their work in the selection process of invited and contributed papers and in setting up the scientific program of the Conference. P Czuba, J J Kolodziej, J Konior, M Szymonski Kraków, 30 October 2008

PREFACE Conference on Advanced Materials and Nanotechnology (CAMAN 2009)

NASA Astrophysics Data System (ADS)

Ali, Aidy

2011-02-01

This special issue of IOP Conference Series: Materials science and Engineering contains papers contributed to the Conference on Advanced Materials and Nanotechnology (CAMAN 2009) held on 3-5 November 2009 in Putra World Trade Centre (PWTC), Kuala Lumpur, Malaysia. The objective of the congress is to provide a platform for professionals, academicians and researchers to exchange views, findings, ideas and experiences on advanced science and technology. After careful refereeing of all manuscripts, 50 papers were selected for publications in this issue. The policy of editing was the content of the material and its rapid dissemination was more important than its form. In 2009, the conference received close to 120 papers from leading researchers and participants from countries such as Iran, India, Switzerland, Myanmar, Nigeria, Canada, Yemen and Malaysia. We strongly hope the new ideas and results presented will stimulate and enhance the progress of research on the above conference theme. We are grateful to all the authors for their papers and presentations in this conference. They are also the ones who help make this conference possible through their hard work in the preparation of the manuscripts. We would also like to offer our sincere thanks to all the invited speakers who came to share their knowledge with us. We would also like to acknowledge the untiring efforts of the reviewers, research assistants and students in meeting deadlines and for their patience and perseverance. We wish to thank all the authors who contributed papers to the conference and all reviewers for their efforts to review the papers as well as the sponsors. We would also like to thank the members of the CAMAN 2009 Organising Committee and the International Advisory Committee for their efforts in making the conference a success. Thank you very much indeed. Guest Editor Aidy Ali

Modular Training Systems and Strategies: An International Meeting (Washington, D.C., May 11-12, 1992).

ERIC Educational Resources Information Center

American Society for Training and Development, Alexandria, VA.

This publication contains materials from a conference to discuss modular approaches to curriculum design. The materials from the United States and five other countries address both national skills standards and modular systems of training delivery. An introduction provides brief summaries of the conference materials and the agenda. "National…

IFLA General Conference, 1984. Special Libraries Division. Section on Geography and Map Libraries. Papers.

ERIC Educational Resources Information Center

International Federation of Library Associations, The Hague (Netherlands).

This document comprises two papers on geography and map libraries and cartographic materials which were presented at the 1984 IFLA general conference. "Cartographic Materials as a Resource for National and Regional Planning and Development," by E. Hans van de Waal (Utrecht), addresses the importance of cartographic materials for…

Conference on asbestos control and replacement for electric utilities: Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

An EPRI conference on Asbestos Control and Replacement for Electric Utilities was held April 9, 1992 in conjunction with the National Asbestos Council's Environmental Management 192 Conference and Exposition. The high cost and potential liabilities of asbestos removal projects, compounded by concerns over the health effects of asbestos replacement materials, was the main motivation for the conference. The objective of the conference was to assemble guidance and information that will help utilities manage asbestos and to effectively prioritize EPRI research in this area. Ten papers covered such topics as computer-aided asbestos management, utility experience with asbestos management, asbestos monitoring andmore » disposal, and asbestos replacement materials. Utility feedback received at the conference indicates that present and planned EPRI research activities in this area will effectively meet industry needs.« less

Influence of raw material properties upon critical quality attributes of continuously produced granules and tablets.

PubMed

Fonteyne, Margot; Wickström, Henrika; Peeters, Elisabeth; Vercruysse, Jurgen; Ehlers, Henrik; Peters, Björn-Hendrik; Remon, Jean Paul; Vervaet, Chris; Ketolainen, Jarkko; Sandler, Niklas; Rantanen, Jukka; Naelapää, Kaisa; De Beer, Thomas

2014-07-01

Continuous manufacturing gains more and more interest within the pharmaceutical industry. The International Conference of Harmonisation (ICH) states in its Q8 'Pharmaceutical Development' guideline that the manufacturer of pharmaceuticals should have an enhanced knowledge of the product performance over a range of raw material attributes, manufacturing process options and process parameters. This fits further into the Process Analytical Technology (PAT) and Quality by Design (QbD) framework. The present study evaluates the effect of variation in critical raw material properties on the critical quality attributes of granules and tablets, produced by a continuous from-powder-to-tablet wet granulation line. The granulation process parameters were kept constant to examine the differences in the end product quality caused by the variability of the raw materials properties only. Theophylline-Lactose-PVP (30-67.5-2.5%) was used as model formulation. Seven different grades of theophylline were granulated. Afterward, the obtained granules were tableted. Both the characteristics of granules and tablets were determined. The results show that differences in raw material properties both affect their processability and several critical quality attributes of the resulting granules and tablets. Copyright © 2014 Elsevier B.V. All rights reserved.

Cataloguing Standards; The Report of the Canadian Task Group on Cataloguing Standards.

ERIC Educational Resources Information Center

National Library of Canada, Ottawa (Ontario).

Following the recommendations of the National Conference on Cataloguing Standards held at the National Library of Canada in May 1970, a Canadian Task Group on Cataloguing Standards was set up to study and identify present deficiencies in the organizing and processing of Canadian material, and the cataloging problems of Canadian libraries, and to…

PREFACE: Modern Technologies in Industrial Engineering (ModTech2015)

NASA Astrophysics Data System (ADS)

Oanta, E.; Comaneci, R.; Carausu, C.; Placzek, M.; Cohal, V.; Topala, P.; Nedelcu, D.

2015-11-01

The dominant feature of the current stage of society development is the update, refinement and innovation of the technological processes and products whose ultimate goal is to satisfy the market requirements. New and modern technologies should be considered in terms of their applicability in industry while the materials can lead to an increase in the quality of the end products. Replacing the existing technologies with innovative and eco-efficient technologies can contribute to an added value increase in the production of new materials. Materials are one of the most dynamic and prospective fields, with applications in all other fields. The development of new advanced materials and technologies shall contribute to the procurement of a wide range of reliable products, with competitive prices and worldwide performance, high sensitivity and functionality, user-friendly and reduced energy consumption, for different industrial applications. Research in the field of advanced/intelligent materials supposes a fundamental, experimental, laboratory and technological research and its approach has to be linked to the application. This involves, even for the niche fields, complex projects which result in scientific issues in top journals, patents and functional models. The third edition of ModTech International Conference was held in Mamaia, Romania, between June 17-20, with the Professional Association in Modern Manufacturing Technologies, ModTech, as main organizer, and the Constanta Maritime University, Constanta, Romania, Silesian University of Technology, Gliwice, Poland, the Technical University of Chisinau, Republic of Moldova and the Donetsk National Technical University, Donetsk, Ukraine as co-organizers. The ModTech2015 International Conference brought together representatives of technology and materials manufacturers, various universities, professional associations and research institutes that exchanged the latest knowledge on the conference topics. This edition was attended by 140 participants from 17 countries. The authors and co-authors were from various countries worldwide, namely: Sweden, China, Switzerland, Romania, Serbia, Germany, Netherlands, Belgium, France, South Korea, Taiwan, Poland, USA, Slovenia, Turkey, Republic of Moldova, Russia, Finland, Japan, Ukraine, Portugal, Uzbekistan, Iraq, Italy and India. The Keynote Speakers were as follows: Prof. Esteban Broitman - Linkoping University, Sweden; Prof. Ziyi Ge - NIMTE, Chinese Academy of Sciences, Ningbo, China; Prof. Thomas Graule - EMPA, Switzerland; prof. Razvan Tamas - Constanta Maritime University, Romania; Prof. Rainer Gadow - University of Stuttgart, Germany; Prof. Marcel Van de Voorde - DELFT University of Technology, Netherlands; Prof. Chris Lacor - Vrije University, Brussels, Belgium; Prof. Fiqiri Hodaj - National Polytechnique Institute of Grenoble, France; Prof. Hong Seok Park - University of Ulsan, South Korea; Prof. Der-Jang Liaw - National Taiwan University of Science and Technology, Taiwan; Prof. Petrica Vizureanu - Gheorghe Asachi Technical University of Iasi, Romania. The main publications of ModTech2015 International Conference are as follows: IOP Conference Series: Materials Science and Engineering, United Kingdom, Indian Journal of Engineering & Materials Sciences (IJEMS) and International Journal of Modern Manufacturing Technologies (IJMMT).

PREFACE: Euro-TMCS I: Theory, Modelling and Computational Methods for Semiconductors

NASA Astrophysics Data System (ADS)

Gómez-Campos, F. M.; Rodríguez-Bolívar, S.; Tomić, S.

2015-05-01

The present issue contains a selection of the best contributed works presented at the first Euro-TMCS conference (Theory, Modelling and Computational Methods for Semiconductors, European Session). The conference was held at Faculty of Sciences, Universidad de Granada, Spain on 28st-30st January 2015. This conference is the first European edition of the TMCS conference series which started in 2008 at the University of Manchester and has always been held in the United Kingdom. Four previous conferences have been previously carried out (Manchester 2008, York 2010, Leeds 2012 and Salford 2014). Euro-TMCS is run for three days; the first one devoted to giving invited tutorials, aimed particularly at students, on recent development of theoretical methods. On this occasion the session was focused on the presentation of widely-used computational methods for the modelling of physical processes in semiconductor materials. Freely available simulation software (SIESTA, Quantum Espresso and Yambo) as well as commercial software (TiberCad and MedeA) were presented in the conference by members of their development team, offering to the audience an overview of their capabilities for research. The second part of the conference showcased prestigious invited and contributed oral presentations, alongside poster sessions, in which direct discussion with authors was promoted. The scope of this conference embraces modelling, theory and the use of sophisticated computational tools in semiconductor science and technology. Theoretical approaches represented in this meeting included: Density Functional Theory, Semi-empirical Electronic Structure Methods, Multi-scale Approaches, Modelling of PV devices, Electron Transport, and Graphene. Topics included, but were not limited to: Optical Properties of Quantum Nanostructures including Colloids and Nanotubes, Plasmonics, Magnetic Semiconductors, Photonic Structures, and Electronic Devices. The Editors Acknowledgments: We would like to thank all participants for making this a very successful meeting and for their contribution to the conference programme and these proceedings. We would also like to acknowledge the financial support from Universidad de Granada, the CECAM UK-Hartree Node, project TEC2013-47283-R of Ministerio de Economía y Competitividad, and the company Materials Design (distributors of MedeA Software). Conference Organising Committee: Francisco M. Gómez-Campos (Co-chair, Universidad de Granada) Salvador Rodríguez-Bolívar (Co-chair, Universidad de Granada) Stanko Tomić (Co-chair, University of Salford)

Introduction

NASA Technical Reports Server (NTRS)

Arnold, Steven M.; Wong, Terry T.

2011-01-01

It would be hard to argue against the fact that Integrated Computational Materials Engineering (ICME) is a fast growing discipline within material science and engineering. A quick scan of the proceedings from conferences such as Aeromat, Material Science and Technology, and the TMS Annual Meeting clearly shows it. What began a few years ago as one symposium has grown into multiple ICME related symposia at each of these conferences. As encouraging as the number of symposia being offered is the attendance at the symposia. For example, one of the ICME symposia at MS&T 10, the symposium in which this book is based, had five sessions which culminated in a panel discussion that was standing room only. In addition to the large, annual materials science and engineering conferences, smaller 1 to 2-day conferences/workshops sponsored by government agencies (e.g. AFRL and NIST) on specific aspects of ICME and by universities promoting their ICME work are regularly offered. And arguably the most significant news with regards to ICME and conferences is the July 2011 First World Congress on ICME. This five day TMS sponsored conference, specifically focused on ICME with an international advisory board of ICME leaders, shows how far ICME has spread across the globe. Evidence for the growth of ICME can also be found in Academia. The University Materials Council (UMC) is composed of department heads for material science and engineering from major U.S. and Canadian universities. Meeting twice a year to share best practices in order to strengthen both the engineering content [1] and the educational process, the UMC s agenda for their Spring 2010 meeting was dedicated to ICME [2]. This meeting was held in response to the growing awareness that the universities play a major role in the success of ICME and therefore need to develop ICME curriculum in order to meet that need. To aid educators in the development of ICME courses, NSF is funding a "Summer School" on ICME to be held at the University of Michigan in 2011 [3]. Northwestern University recently announced a MS Certificate Program in ICME [4]. Course work for this certificate begins in the Fall of 2011. Other signs that ICME is growing comes from the formation of ICME initiatives from work that did not start off with ICME in mind. One of the committees in ASM International is the Materials Properties Database Committee (MPDC). In the 2010 meeting of the MPDC, based on a study by ASM, the committee decided that it would create an ICME sub-committee in order to determine how ASM can meet the growing needs of the ICME community [5]. In 1999, the Air Force Research Laboratory (AFRL) created a consortium, the Metals Affordability Initiative (MAI), with members from both industry and government with a goal of reducing the cost and time to market of producing metal parts for aerospace applications [6].

Tunisia-Japan Symposium: R&D of Energy and Material Sciences for Sustainable Society

NASA Astrophysics Data System (ADS)

Akimoto, Katsuhiro; Suzuki, Yoshikazu; Monirul Islam, Muhammad

2015-04-01

This volume of the Journal of Physics: Conference Series contains papers presented at the Tunisia-Japan Symposium: R&D of Energy and Material Sciences for Sustainable Society (TJS 2014) held at Gammarth, Republic of Tunisia on November 28-30, 2014. The TJS 2014 is based on the network of the Tunisia-Japan Symposium on Science, Society and Technology (TJASSST) which has been regularly organized since 2000. The symposium was focused on the technological developments of energy and materials for the realization of sustainable society. To generate technological breakthrough and innovation, it seems to be effective to discuss with various fields of researchers such as solid-state physicists, chemists, surface scientists, process engineers and so on. In this symposium, there were as many as 109 attendees from a wide variety of research fields. The technical session consisted of 106 contributed presentations including 3 plenary talks and 7 key-note talks. We hope the Conference Series and publications like this volume will contribute to the progress in research and development in the field of energy and material sciences for sustainable society and in its turn contribute to the creation of cultural life and peaceful society.

Laser micro-structuring of surfaces for applications in materials and biomedical science

NASA Astrophysics Data System (ADS)

Sarzyński, Antoni; Marczak, Jan; Strzelec, Marek; Rycyk, Antoni; CzyŻ, Krzysztof; Chmielewska, Danuta

2016-12-01

Laser radiation is used, among others, for surface treatment of various materials. At the Institute of Optoelectronics, under the direction of the late Professor Jan Marczak, a number of works in the field of laser materials processing were performed. Among them special recognition deserves flagship work of Professor Jan Marczak: implementation in Poland laser cleaning method of artworks. Another big project involved the direct method of laser interference lithography. These two projects have already been widely discussed in many national and international scientific conferences. They will also be discussed at SLT2016. In addition to these two projects in the Laboratory of Lasers Applications many other works have been carried out, some of which will be separately presented at the SLT2016 Conference. These included laser decorating of ceramics and glass (three projects completed in cooperation with the Institute of Ceramics and Building Materials), interference structuring medical implants (together with the Warsaw University of Technology), testing the adhesion of thin layers (project implemented together with IFTR PAS), structuring layers of DLC for growing endothelial cells (together with IMMS PAS), engraving glass for microfluidic applications, metal marking, sapphire cutting and finally the production of microsieves for separating of blood cells.

NASA SBIR product catalog, 1991

NASA Technical Reports Server (NTRS)

1991-01-01

This catalog is a partial list of products of NASA SBIR (Small Business Innovation Research) projects that have advanced to some degree into Phase 3. While most of the products evolved from work conducted during SBIR Phase 1 and 2, a few advanced to commercial status solely from Phase 1 activities. The catalog presents information provided to NASA by SBIR contractors who wished to have their products exhibited at Technology 2001, a NASA-sponsored technology transfer conference held in San Jose, California, on December 4, 5, and 6, 1991. The catalog presents the product information in the following technology areas: computer and communication systems; information processing and AI; robotics and automation; signal and image processing; microelectronics; electronic devices and equipment; microwave electronic devices; optical devices and lasers; advanced materials; materials processing; materials testing and NDE; materials instrumentation; aerodynamics and aircraft; fluid mechanics and measurement; heat transfer devices; refrigeration and cryogenics; energy conversion devices; oceanographic instruments; atmosphere monitoring devices; water management; life science instruments; and spacecraft electromechanical systems.

PREFACE: 2013 International Conference on Manufacturing, Optimization, Industrial and Material Engineering (MOIME 2013)

NASA Astrophysics Data System (ADS)

Lumban Gaol, Ford; Rizwan Hussain, Raja; Pandiangan, Tumpal; Desai, Amit

2013-06-01

Banner The 2013 International Conference on Manufacturing, Optimization, Industrial and Material Engineering (MOIME 2013), was held at the Grand Royal Panghegar Hotel, Bandung, Indonesia, from 9-10 March 2013. The MOIME 2013 conference brought together researchers, engineers and scientists in the field from around the world. MOIME 2013 aimed to promote interaction between the theoretical, experimental, and applied communities, so that a high level exchange was achieved in new and emerging areas within Material Engineering, Industrial Engineering and all areas that related to Optimization. We would like to express our sincere gratitude to all in the Technical Program Committee who reviewed the papers and developed a very interesting Conference Program as well as the invited and plenary speakers. This year, we received 103 papers and after rigorous review, 45 papers were accepted. The participants came from 16 countries. There were six Plenary and Invited Speakers. It is an honour to present this volume of IOP Conference Series: Materials Science and Engineering (MSE) and we deeply thank the authors for their enthusiastic and high-grade contribution. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee, the organizing secretariat and the conference sponsors for the financial support that contributed to the success of MOIME 2013. The Editors of the MOIME 2013 Dr Ford Lumban Gaol Dr Raja Rizwan Hussain Tumpal Pandiangan Dr Amit Desai The PDF contains the abstracts from the plenary and invited articles and the workshop.

2014 International Conference on Manufacturing, Optimization, Industrial and Material Engineering

NASA Astrophysics Data System (ADS)

Lumban Gaol, Ford; Webb, Jeff; Ding, Jun

2014-06-01

The 2nd International Conference on Manufacturing, Optimization, Industrial and Material Engineering 2014 (MOIME 2014), was held at the Grand Mercure Harmoni, Opal Room 3rd Floor, Jakarta, Indonesia, during 29-30 March 2014. The MOIME 2014 conference is designed to bring together researchers, engineers and scientists in the domain of interest from around the world. MOIME 2014 is placed on promoting interaction between the theoretical, experimental, and applied communities, so that a high level exchange is achieved in new and emerging areas within Material Engineering, Industrial Engineering and all areas that relate to Optimization. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting Conference Program as well as the invited and plenary speakers. This year, we received 97 papers and after rigorous review, 24 papers were accepted. The participants come from 7 countries. There are 4 (four) parallel session and 2 Invited Speakers and one workshop. It is an honour to present this volume of IOP Conference Series: Materials Science and Engineering (MSE) and we deeply thank the authors for their enthusiastic and high-grade contributions. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of MOIME 2014. The Editors of the MOIME 2014 Proceedings Editors Dr Ford Lumban Gaol Jeff Webb, PhD Professor Jun Ding, PhD

PREFACE: 3rd International Conference on Manufacturing, Optimization, Industrial and Material Engineering (MOIME 2015)

NASA Astrophysics Data System (ADS)

Lumban Gaol, Ford; Webb, Jeff; Ding, Jun

2015-05-01

The 3rd International Conference on Manufacturing, Optimization, Industrial and Material Engineering (MOIME 2015) was held at the Sheraton Kuta, Bali, Indonesia, from 28 - 29 March 2015. The MOIME 2015 conference is aimed to bring together researchers, engineers and scientists in the domain of interest from around the world. MOIME 2015 is placed on promoting interaction between the theoretical, experimental, and applied communities, so that a high level exchange is achieved in new and emerging areas within Material Engineering, Industrial Engineering and all areas that relate to Optimization. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting Conference Program, as well as the invited and plenary speakers. This year, we received 99 papers and after rigorous review, 24 papers were accepted. The participants come from eight countries. There were four parallel sessions and two invited speakers. It is an honour to present this volume of IOP Conference Series: Materials Science and Engineering (MSE) and we deeply thank the authors for their enthusiastic and high-grade contributions. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of MOIME 2015. The Editors of the MOIME 2015 Proceedings Dr. Ford Lumban Gaol Jeff Webb, Ph.D Prof. Jun DING, Ph.D

PREFACE: 5th International Conference on Materials and Applications for Sensors and Transducers (IC-MAST2015)

NASA Astrophysics Data System (ADS)

Hristoforou, E.; Vlachos, D. S.; Giouroudi, I.; Kar-Narayan, S.; Potirakis, S.

2016-03-01

The 5th International Conference on Materials and Applications for Sensors and Transducers, Mykonos island, Greece, hosted about 110 oral and poster papers and more than 90 participants. IC-MAS, as an international annual conference which tries to meet the needs for various types of sensors, particularly those which may be manufactured by low cost methods (i.e. hybrid sensors, smart specialization devices, particular applications not necessarily requiring integrated micro-nano technologies), covering all types of materials and physical effects, appears to be a necessity. IC-MAST has been established as a high quality international conference by: I. Gathering together multinational researchers from all over the world, working in different materials for sensors and transducers and technical applications of sensors, but also in some cases in the management of the data coming from sensors and transducers. The careful selection of the conference place (like Aegean Sea, Budapest, Prague, Bilbao, Mykonos etc) allows for enjoying the local hospitality and sightseeing. II. Emphasizing in hybrid sensors and smart specialization devices produced by inexpensive methods, without excluding of course micro-nano technology, from all kinds of solid state, liquid and gaseous materials, as well as in particular transducer applications (design and development, as well as use of sensing data) III. Innovatively implementing the Virtual Paper Concept, allowing for large impact of research works presented in the conference by authors who either have no time or no funding support for visiting a conference; this year more than 12 virtual papers are presented in the 5th IC MAST, following a standardized procedure via the our robust and reliable Conference Site (www.icmast.net!) > IV. Allowing for lengthy technical and managerial discussions in terms of sensor, material and instrumentation development; furthermore, the different research groups gathered together are offered the particular advantage of arranging and concluding research proposals and projects, otherwise not having a visible possibility of such realization The 5th IC-MAST organizing committee is proud that the Conference Keynote Speaker was Prof George Hadjipanayis, University of Delaware. We are also proud for the invited speakers of the conference: • Stergios Logothetidis, Aristotle University of Thessaloniki, Greece • Dimitris Tsoukalas, National Technical University of Athens, Greece • Susana Cardoso de Freitas, INESC Microsistemas e Nanotecnologias • Yuris Dzenis, University of Nebraska-Lincoln, USA The IC-MAST 2015 organizers believe that the target of the Conference has been successfully met by enhancing knowledge in sensors by all participants, accelerating the achievement of results and optimizing the under design products, in a quite friendly way! Therefore, participants made an appointment for the next year in Athens, Greece, where the 6th International MAST Conference will be realized!

Proceedings of the Fifteenth Annual Conference on Fossil Energy Materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Judkins, R.R.

2002-02-12

The Fifteenth Annual Conference on Fossil Energy Materials was held in Knoxville, Tennessee, on April 30 through May 2, 2001. The meeting was sponsored by the U.S. Department of Energy's (DOE) Office of Fossil Energy through the Advanced Research Materials Program (ARM). The objective of the ARM Program is to conduct research and development on materials for longer-term fossil energy applications, as well as for generic needs of various fossil fuel technologies. The management of the program has been decentralized to the DOE Oak Ridge Operations Office and Oak Ridge National Laboratory (ORNL). The research is performed by staff membersmore » at ORNL and by researchers at other national laboratories, universities, and in private industry. The work is divided into the following categories: (1) structural, ceramics, (2) new alloys and coatings, (3) functional materials, and (4) technology development and transfer. These proceedings were produced primarily from electronic files provided by the authors. They have been neither refereed nor extensively edited. However, most of the papers have already undergone technical review within the individual organizations before submission to the Program Office. The proceedings are available on the Fossil Energy home page at http://www.ornl.gov/fossil (Workshops and Conferences). The successful completion of the conference and publication of the proceedings has required help from several people. The organizers wish to thank Angela Beach of the ORNL Conference Office for her help in the many arrangements, and the numerous staff and support personnel associated with the conference. Finally, we express our sincere appreciation to the authors whose efforts are the very basis of the conference.« less

Conference on asbestos control and replacement for electric utilities: Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

An EPRI conference on Asbestos Control and Replacement for Electric Utilities was held April 9, 1992 in conjunction with the National Asbestos Council`s Environmental Management 192 Conference and Exposition. The high cost and potential liabilities of asbestos removal projects, compounded by concerns over the health effects of asbestos replacement materials, was the main motivation for the conference. The objective of the conference was to assemble guidance and information that will help utilities manage asbestos and to effectively prioritize EPRI research in this area. Ten papers covered such topics as computer-aided asbestos management, utility experience with asbestos management, asbestos monitoring andmore » disposal, and asbestos replacement materials. Utility feedback received at the conference indicates that present and planned EPRI research activities in this area will effectively meet industry needs.« less

PREFACE: International Conference on Applied Sciences (ICAS2014)

NASA Astrophysics Data System (ADS)

Lemle, Ludovic Dan; Jiang, Yiwen

2015-06-01

The International Conference on Applied Sciences (ICAS2014) took place in Hunedoara, Romania from 2-4 October 2014 at the Engineering Faculty of Hunedoara. The conference takes place alternately in Romania and in P.R. China and is organized by "Politehnica" University of Timisoara, Romania, and Military Economics Academy of Wuhan, P.R. China, with the aim to serve as a platform for exchange of information between various areas of applied sciences and to promote the communication between scientists of different nations, countries and continents. The topics of the conference covered a comprehensive spectrum of issues: 1. Economical Sciences 2. Engineering Sciences 3. Fundamental Sciences 4. Medical Sciences The conference gathered qualified researchers whose expertise can be used to develop new engineering knowledge that has the potential for application in economics, defense, medicine, etc. There were nearly 100 registered participants from six countries, and four invited and 56 oral talks were delivered during the two days of the conference. Based on the work presented at the conference, selected papers are included in this volume of IOP Conference Series: Materials Science and Engineering. These papers present new research in the various fields of Materials Engineering, Mechanical Engineering, Computer Engineering, and Mathematical Engineering. It is our great pleasure to present this volume of IOP Conference Series: Materials Science and Engineering to the scientific community to promote further research in these areas. We sincerely hope that the papers published in this volume will contribute to the advancement of knowledge in their respective fields.

EDITORIAL: Theory of Quantum Gases and Quantum Coherence: The Cortona BEC Workshop, 29 October-2 November 2005

NASA Astrophysics Data System (ADS)

Capuzzi, Pablo; Chitra, R.; Menotti, Chiara; Minguzz, Anna; Vignolo, Patrizia

2006-05-01

Nonlinear, or multiphoton, interaction of intense laser radiation with matter has been a key research subject for about four decades. Every three years, the International Conference on Multiphoton Processes (ICOMP) covers the latest advances in the field. Intense-field physics has seen phenomenal progress over the last decade. What looked like dreams in the mid-nineties have become routine today. Major theoretical, experimental and technological advances in fundamental science and applications of multiphoton processes cover such diverse areas as precision measurements, femtosecond and now attosecond metrology, quantum control of atomic and molecular dynamics, laser machining of solid state materials, laser acceleration of electrons and protons, and medical applications. This special issue of Journal of Physics B: Atomic, Molecular and Optical Physics (J. Phys. B) contains a collection of articles originating from the Tenth International Conference on Multiphoton Processes (ICOMP 2005) held on 9-14 October 2005 in Orford, Quebec, Canada (general chair Lou DiMauro, Ohio State University, program co-chairs Paul Corkum and Misha Ivanov, National Research Council of Canada). The conference focused on atoms and molecules in strong fields, femtosecond and attosecond processes, propagation of intense pulses, and of course multiphoton processes which lie at the foundation of all these subjects. Articles presented in this issue cover several key areas of intense-field physics. These include strong field ionization of atoms, molecules and inside transparent dielectric materials, methods of generation and characterization of attosecond XUV pulses and pulse trains, and new approaches to using intense laser fields and/or attosecond pulses for studying entangled systems and imaging electronic and nuclear dynamics with sub-Ångstrom spatial and sub-femtosecond temporal resolution. We have tried to group the papers according to these general areas. We would like to use this opportunity to thank all the participants of ICOMP-X, and in particular the contributors to this issue, for the high quality of science presented at the conference and in this journal. The success of the conference would not have been possible without the program committee which included D Charalambidis, L Cocke, R Freeman, Y Fujimura, S Goreslavsky, A L'Huillier, F Krausz, R Levis, S H Lin, A Maquet, J Marangos, K Midorikawa, G Mourou, P Salieres, W Sandner, K Schafer, A Scrinzi, A M Sergeev, H Stapelfeldt, A Starace, J Ullrich, M Vrakking, and K Yamanouchi. A particularly lively atmosphere in the discussions was ensured by many students who were able to participate in the conference, in part due to generous support of the Canadian Institute for Photonic Innovations (CIPI) to the Canadian, and of the US Department of Energy Office of Basic Energy Sciences to the American students. Additional support to the conference was provided by the Natural Sciences and Engineering Research Council (NSERC), the National Research Council of Canada (NRC), Pfeiffer Vacuum, Femtolasers Produktions GmbH, Roentdek Handels GmbH, Coherent Laser Products, and Amplitude Technologies. Last but not least, the guest editors of this special issue would like to acknowledge the tremendous amount of work done by the staff of J. Phys. B in handling all aspects of the publication process. In particular, we would like to thank Isabelle Auffret-Babak, Alice Malhador and Joanna Dingley from the editorial team, Katie Gerrard in production and the Editor-in-Chief, Professor J-M Rost.

ICCG-10: Tenth International Conference on Crystal Growth. Oral presentation abstracts

NASA Technical Reports Server (NTRS)

1992-01-01

Oral presentation abstracts from the tenth International Conference on Crystal Growth (ICCG) (Aug. 16-21, 1992) are provided. Topics discussed at the conference include superconductors, semiconductors, nucleation, crystal growth mechanisms, and laser materials. Organizing committees, ICCG advisory board and officers, and sponsors of the conference are also included.

PREFACE: International Conference on Advanced Materials (ICAM 2015)

NASA Astrophysics Data System (ADS)

El-Khateeb, Mohammad Y.

2015-10-01

It is with great pleasure to welcome you to the "International Conference of Advanced Materials ICAM 2015" that will take place at Jordan University of Science and Technology (JUST), Irbid, Jordan. This year, the conference coincides with the coming of spring in Jordan; we hope the participants will enjoy the colors and fragrance of April in Jordan. The call for papers attracted submissions of over a hundred abstracts from twenty one different countries. These papers are going to be classified under four plenary lectures, fifteen invited papers, thirty five oral presentations and more than sixty posters covering the different research areas of the conference. The ICAM conference focuses on new advances in research in the field of materials covering chemical, physical and biological aspects. ICAM includes representatives from academia, industry, governmental and private sectors. The plenary and invited speakers will present, discuss, promote and disseminate research in all fields of advanced materials. Topics range from synthesis, applications, and solid state to nano-materials. In addition, talented junior investigators will present their best ongoing research at a poster session. We have also organized several workshops contiguous to the main conference, such as the one-day workshop on "Particle Surface Modification for Improved Applications". The purpose of this short course was to introduce interested materials technologists to several methodologies that have been developed to modify the surfaces of particulate matter. Moreover, a pre-conference workshop on "Communication in Science" was conducted for young scientists. The main goal of this workshop was to train young scientists in matters of interdisciplinary scientific communications. In addition to the scientific program, the attendees will have a chance to discover the beauty of Jordan, a land of rich history and varied culture. Numerous social events that will provide opportunities to renew old contacts and establish new ones were scheduled to accompany and follow the scientific activities. They also aim to acquaint the participants with the capital, Amman, and other famous historic and touristic sites in Jordan, such as Petra, one of the new seven wonders of the world, Jerash, desert palaces, Jedara, Wadi Rum and the Dead Sea. The social program will be extraordinary for the participants and their companions, reflecting the Jordanian sense of hospitality and generosity combined with fun. A special issue of IOP Conference Series: Material Science and Engineering is dedicated to publishing selected papers presented at the conference. Papers submitted for publication will be peer reviewed. The journal offers open access making the proceedings available to a wider scope of readership. I would like to express my gratitude to all participants for their contributions to the conference program. I am also thankful to the members of the Organizing Committee for their endless efforts and diligence. Special thanks go to the conference Scientific Committee members whose inputs were important and who were always supportive to the organizers. It is the Committee's honor to acknowledge the financial sponsorship of the conference from the following organizations: COMESTIC, Stevin Rock JJC, Al-Safadi Housing Company, Al-Haiek Housing Company, Cairo Amman Bank, Ramtha Chamber of Commerce, JUST Library, Jordan Engineers Association, and El-Far Importing. Sincere thanks and appreciation go to the keynote speakers, session organizers, session chairs, and the JUST President, staff and students for their support and efforts. Finally, we wish to thank you for your participation in the conference and contributing to its success by sharing your scholarly achievements with other colleagues and scholars. Best wishes for an enjoyable and memorable experience. Prof. Mohammad Y. El-Khateeb Conference Chair

Environmental, Safety, and Health Considerations: Composite Materials in the Aerospace Industry

NASA Technical Reports Server (NTRS)

Chu, Huai-Pu (Compiler)

1994-01-01

The Aerospace Industries Association, Suppliers of Advanced Composite Materials Association, and the National Aeronautics and Space Administration co-sponsored a conference on 'Environmental, Safety, and Health Considerations--Composite Materials in the Aerospace Industry.' The conference was held in Mesa, Arizona, on October 20-21, 1994. Seventeen papers were presented in four sessions including general information, safety, waste, and emissions from composites. Topics range from product stewardship, best work practice, biotransformation of uncured composite materials, to hazardous waste determination and offgassing of composite materials.

Mathemagenic Activities Program: [Reports from a Conference on New Perspectives in Developmental Assessment (1st, Athens, Georgia, November 15, 1972)].

ERIC Educational Resources Information Center

Smock, Charles D., Ed.; And Others

This set of four research reports is a product of the Mathemagenic Activities Program (MAP) for early childhood education of the University of Georgia Follow Through Program. Based on Piagetian theory, the MAP provides sequentially structured sets of curriculum materials and processes that are designed to continually challenge children in…

Annual Conference on Nuclear and Space Radiation Effects, 16th, Santa Cruz, Calif., July 17-20, 1979, Proceedings

NASA Technical Reports Server (NTRS)

Bombardt, J.

1979-01-01

Papers are presented on the following topics: radiation effects in bipolar microcircuits; basic radiation mechanisms in materials and devices; energy deposition and dosimetry; and system responses from SGEMP, IEMP, and EMP. Also considered are basic processes in SGEMP and IEMP, radiation effects in MOS microcircuits, and space radiation effects and spacecraft charging.

The Ph.D. Dissertation: An Analysis of the Doctoral Dissertation as an Information Source.

ERIC Educational Resources Information Center

Boyer, Calvin James

In 1972 American universities will confer 33,700 doctorates. An essential feature of the process which leads to the doctorate is the submission and defense of a dissertation. The doctoral dissertation must embody the results of extended research, be an original contribution to knowledge and include material worthy of publication. It is surprising,…

Electron Technology: ELTE 2016

NASA Astrophysics Data System (ADS)

Pisarkiewicz, Tadeusz; Kucewicz, Wojciech

2016-12-01

In this paper we present a review of research results and technical accomplishments presented by researchers from technical universities, governmental institutes and research companies during the XIIth Scientific Conference Electron Technology, ELTE 2016. This review is based on materials presented at four topical conference sessions: Microelectronics and Nanoelectronics, Photonics, Materials and Technologies, and Microsystems and also on materials presented by invited speakers at two dedicated sessions. Oral sessions were accompanied by the poster sessions. In effect about 50 papers gathered in this volume reflect the topics discussed at the Conference. A short description of technological and measurement possibilities in the laboratories of Academic Centre for Materials and Nanotechnology and also in the Department of Electronics of the Faculty of Computer Science, Electronics and Telecommunications AGH UST are given.

49 CFR 209.111 - Informal response and assessment.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., information or materials, submitted by the respondent and relevant information presented during any conference... consideration of an informal response, including any relevant information presented at a conference, the Chief... written explanations, information or other materials as respondent may desire in answer to the charges or...

PREFACE: International Scientific and Technical Conference ''Innovative Mechanical Engineering Technologies, Equipment and Materials-2014''

NASA Astrophysics Data System (ADS)

Nail, K.

2015-06-01

In the period from 3 to 5 December 2014 the city of Kazan hosted the International Scientific Conference ''Innovative mechanical engineering technologies, equipment and materials - 2014'' (ISC ''vIMETEM - 2014''). The event was followed by the 14th International specialized exhibition ''Engineering. Metalworking. Kazan'' The main objective of the annual conference was for participants to discuss scientific and technical achievements in the design and manufacture of engineering products, the expansion of cooperation between scientific organizations and enterprises of machine-building complex and the definition of perspective ways of creation and development of new techniques, technologies and materials. The conference ''IMETEM'' was devoted to the 90th anniversary of Fayzrahman Salahovich Yunusov, who made a great contribution in the field of aviation technology. Kashapov Nail, D.Sc., professor (Kazan Federal University)

Conference on Occupational Health Aspects of Advanced Composite Technology in the Aerospace Industry Held in Dayton, Ohio on 6-9 February 1989. Volume 1. Executive Summary

DTIC Science & Technology

1989-03-01

skins and fiber glass covers. Processing or curing (the application of heat and pressure to consolidate the laminate and cross-link the matrix) was...stabilizer skins and fiberglass covers. Processing or curing (the application of heat and pressure to consolidate the laminate and cross-link the matrix) is...high stiffness fibers to develop a common understanding of advanced . -nposites. Areas addressed were applications , materials manufacturing and use

Integrated optical circuit engineering IV; Proceedings of the Meeting, Cambridge, MA, Sept. 16, 17, 1986

NASA Astrophysics Data System (ADS)

Mentzer, Mark A.; Sriram, S.

The design and implementation of integrated optical circuits are discussed in reviews and reports. Topics addressed include lithium niobate devices, silicon integrated optics, waveguide phenomena, coupling considerations, processing technology, nonlinear guided-wave optics, integrated optics for fiber systems, and systems considerations and applications. Also included are eight papers and a panel discussion from an SPIE conference on the processing of guided-wave optoelectronic materials (held in Los Angeles, CA, on January 21-22, 1986).

Proceedings of the conference on energy conservation: Retrofit of Municipal Wastewater Treatment Facilities

NASA Astrophysics Data System (ADS)

1982-02-01

The concepts of the roles of heat and temperature, ventilation and water removal when organic material is assembled into a self insulating mass are summarized. The practical application of these concepts in static pile configuration or the Rutgers process are outlined. The concepts and means of application are relevant to all design approaches whether or not a reactor structure is involved, whether the process is batch or continuous, and whether the mass is agitated or static.

Proceedings of the High Energy Density Materials Contractors Conference Held on 25-28 February 1990 in Long Beach, California

DTIC Science & Technology

1990-05-01

Transfer Process in Rare Gas Solids" 1. Wiedeman, B. Weiller, and H . Helvajian , The Aerospace Corporation .......371 wMagneto Circular Dichroism (MCD...370 ENERGY TRANSFER PROCESS IN RARE GAS SOLIDS L. WIEDEMAN, B. WEILLER AND H . HELVAJIAN It is commonly true that the potential energy extracted from...53 -,"’Meta I-Doped H ( Z Q Daniel D. Konow blow, Astronautics Laboratory ................................. 55 "Infrared Emission Spectrum of H3 in

The Helen Keller World Conference on Services to Deaf-Blind Persons (4th, Stockholm, Sweden, September 28-October 3, 1989).

ERIC Educational Resources Information Center

Association of the Swedish Deaf-Blind, Enskede (Sweden).

The monograph comprises the proceedings of a 1989 international conference on services to the deaf blind, including conference papers as well as reports from eight nations. Introductory material includes the text of the "Declaration of the Basic Needs of Deaf-Blind Persons" adopted at the conference, the conference program, and a list of…

Proceedings: Conference on asbestos control and replacement for electric utilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

An EPRI conference on Asbestos Control and Replacement for Electric Utilities was held April 6--7, 1993 in conjunction with the Environmental Information Association`s (formerly National Asbestos Council) Environmental Management `93 Conference and Exposition. The high cost and potential liabilities of asbestos removal projects, compounded by concerns over the health effects of asbestos replacement materials, was the main motivation for the conference. The objective of the conference was to assemble guidance and information that will help utilities manage asbestos and to effectively prioritize EPRI research in this area. Eleven papers covered such topics as changes in the Environmental Protection Agency`s (EPA)more » ban on asbestos, utility experience with asbestos management and abatement, asbestos monitoring and disposal, and asbestos replacement materials. Utility feedback received at the conference indicates that present and planned EPRI research activities in this area will effectively meet industry needs.« less

European Conference 'Training, Employment and Integration of Disabled Persons' (Berlin, West Germany, June 19-20, 1985).

ERIC Educational Resources Information Center

European Centre for the Development of Vocational Training, Berlin (West Germany).

This report summarizes contributions, discussions, results, and proposals from a conference focusing on the social and economic integration of the disabled. Introductory materials include the conference objectives and summaries of the opening, words of greeting, and introduction to conference objectives by Ernst Piehl, Henry Scicluna, and Tina…

Conference on Fire Resistant Materials: A compilation of presentations and papers

NASA Technical Reports Server (NTRS)

Kourtides, D. A. (Editor); Johnson, G. A. (Editor)

1979-01-01

The proceedings of the NASA IRE Resistant Materials Engineering (FIREMEN) Program held at Boeing Commercial Airplane Company, Seattle, Washington, on March 1-2, 1979 are reported. The conference was to discuss the results of research by the National Aeronautics and Space Administration in the field of aircraft fire safety and fire-resistant materials. The program topics include the following: (1) large-scale testing; (2) fire toxicology; (3) polymeric materials; and (4) fire modeling.

Conference on Fire Resistant Materials (FIREMEN): A compilation of presentations and papers

NASA Technical Reports Server (NTRS)

Kourtides, D. A. (Editor)

1978-01-01

The proceedings of the NASA Fire Resistant Materials Engineering (FIREMEN) Program held at Ames Research Center on April, 13, 14, 1978 are reported. The purpose of the conference was to discuss the results of NASA in the field of aircraft fire safety and fire resistant materials. The program components include the following: (1) large-scale testing; (2) fire toxicology; (3) polymeric materials; and (4) bibliography related and/or generated from the program.

Adaptive and active materials: selected papers from the ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 13) (Snowbird, UT, USA, 16-18 September 2013)

NASA Astrophysics Data System (ADS)

Johnson, Nancy; Naguib, Hani; Turner, Travis; Anderson, Iain; Bassiri-Gharb, Nazanin; Daqaq, Mohammed; Baba Sundaresan, Vishnu; Sarles, Andy

2014-10-01

The sixth annual meeting of the ASME Smart Materials, Adaptive Structures and Intelligent Systems Conference (SMASIS) was held in the beautiful mountain encircled Snowbird Resort and Conference Center in Little Cottonwood Canyon near Salt Lake City, Utah. It is the conference's objective to provide an up-to-date overview of research trends in the entire field of smart materials systems in a friendly casual forum conducive to the exchange of ideas and latest results. As each year we strive to grow and offer new experiences, this year we included special focused topic tracks on nanoscale multiferroic materials and origami engineering. The cross-disciplinary emphasis was reflected in keynote speeches by Professor Kaushik Bhattacharya (California Institute of Technology) on 'Cyclic Deformation and the Interplay between Phase Transformation and Plasticity in Shape Memory Alloys', by Professor Alison Flatau (University of Maryland at College Park) on 'Structural Magnetostrictive Alloys: The Other Smart Material', and by Dr Leslie Momoda (Director of the Sensors and Materials Laboratories, HRL Laboratories, LLC, Malibu, CA) on 'Architecturing New Functional Materials: An Industrial Perspective'. SMASIS 2013 was divided into seven symposia which span basic research, applied technological design and development, and industrial and governmental integrated system and application demonstrations. SYMP 1. Development and Characterization of Multifunctional Materials. SYMP 2. Mechanics and Behavior of Active Materials. SYMP 3. Modeling, Simulation and Control of Adaptive Systems. SYMP 4. Integrated System Design and Implementation. SYMP 5. Structural Health Monitoring. SYMP 6. Bioinspired Smart Materials and Systems. SYMP 7. Energy Harvesting. Authors of selected papers in the materials areas (symposia 1, 2, and 6) as well as energy harvesting (symposium 7) were invited to write a full journal article on their presentation topic for publication in this special issue of Smart Materials and Structures. This collection of papers demonstrates the exceptional quality and originality of the conference presentations. We are very appreciative of their efforts to produce this collection of highly relevant articles on smart materials.

Population. Readings for Senior Secondary Social Studies. Updated 1989.

ERIC Educational Resources Information Center

Victoria International Development Education Association (British Columbia).

This document contains the information kit developed for the annual Model Summit Conferences for schools in the Victoria, British Columbia (Canada) and surrounding school districts. Materials germane to the conference topic were compiled and assembled for participants. The materials are of current interest, concise, simple and provide a balanced…

PREFACE: Joint European Magnetic Symposia - JEMS 2010

NASA Astrophysics Data System (ADS)

Spałek, Jozef

2011-07-01

Conference banner The Joint European Magnetic Symposia JEMS 2010 took place in the complex Auditorium Maximum of the Jagiellonian University in Kraków, Poland, between 23-28 August 2010. It followed the series of the conferences in Grenoble (2001), Dresden (2004), San Sebastian (2006), and Dublin (2008). The next Symposia will be held in 2012 in Parma (Italy). The Symposia cover a broad range of aspects of magnetism and magnetic materials, as well as providing a forum for the magnetism community to discuss new concepts, properties, and developments in all branches of fundamental and applied magnetism. The JEMS 2010 Symposia were organized by the Institute of Physics of Jagiellonian University, in cooperation with AGH University of Science and Technology (Kraków), Cracow University of Technology, Institute of Nuclear Physics of the Polish Academy of Sciences in Kraków, and the Silesian University in Katowice. I thank the Local Committee, and in particular Professor Krzysztof Tomala, for their hard work long before, during, and after the Conference. We dedicate this volume to Professor Henryk Szymczak from the Institute of Physics of the Polish Academy of Sciences for his long lasting service to the magnetism community and the organizational effort in bringing this Conference to our community. Thank you Henryk! The Conference contained Plenary Sessions and 16 Symposia, which are listed below. Most of them had two chairpersons (also listed), one from abroad and one from Poland. I believe that a collective chairmanship of the Symposia is very helpful in both their organization, as well as in the reviewing process of the papers submitted to the Conference Proceedings. I would like to cordially thank all the persons listed below, who have contributed enormously to the success of our meeting. The Proceedings comprises 116 invited and contributed papers. I thank the Co-editors for their continuing work long after the Conference. Arrivederci in Parma! Jozef SpałekChairman of JEMS 2010 Symposia 1. Plenary, Semi-plenary, Tutorials 2. Magnetization Processes Spin Excitations and Ultrafast DynamicsCoordinator: Andrzej Maziewski (Bialystok) 3. Hard Magnetic Materials and MagnetocaloricsCoordinator: Henryk Figiel (Kraków) 4. Magnetic HydridesCoordinators: Ladislav Havela (Praha), Zbigniew Tarnawski (Kraków) 5. Interface of Magnetic Thin FilmsCoordinators: Jürgen Fassbender (Dresden), N-T H Kim-Ngan (Kraków) 6. Magnonic CrystalsCoordinators: Bahram Djafari-Rouhani (Lille), Henryk Puszkarski (Poznan) 7. Magnetism of Metals, Alloys, and IntermetallicsCoordinator: Andrzej Szytula (Kraków) 8. Molecular MagnetismCoordinators: Stephen Blundell (Oxford), Maria Balanda (Kraków) 9. Magnetooptics of NanomagnetsCoordinators: Kamil Postava (Ostrava), Marek Kisielewski (Bialystok) 10. NanomagnetismCoordinators: Marek Przybylski (Halle), Jürgen Kirschner (Halle) 11. Other topics - Biomagnetism, Domain Walls, InstrumentationCoordinator: Henryk Figiel (Kraków) 12. Magnetic Perovskites and MultiferroicsCoordinator: Henryk Szymczak (Warszawa) 13. Magnetic Semiconductors and InsulatorsCoordinators: Klaus Baerner (Göttingen), Tadeusz Gron (Katowice) 14. Magnetic Shape Memory Effects and Related PhenomenaCoordinators: Oliver Gutfleisch (Dresden), Sebastian Fähler (Dresden) 15. Soft Magnetic MaterialsCoordinators: Julian González (San Sebastian), Krzysztof Kulakowski (Kraków) 16. SpintronicsCoordinator: Maciej Sawicki (Warszawa) 17. Strongly Correlated Electron Systems, Magnetism and SuperconductivityCoordinator: Andrzej Slebarski (Katowice) The next Joint European Magnetic Symposia, JEMS 2012, will be held in Parma, Italy, 9-14 September 2012.www.jems2012.itCo-Chairs:Franca Albertini, Institute of Materials for Electronics and Magnetism (IMEM), CNR, ParmaRoberto De Renzi, Department of Physics, University of Parma

EDITORIAL: Photonica 2011: 3rd International School and Conference on Photonics Photonica 2011: 3rd International School and Conference on Photonics

NASA Astrophysics Data System (ADS)

Petrović, Jovana; Stepić, Milutin; Hadžievski, Ljupčo

2012-04-01

Photonics is a rapidly growing discipline of physics that investigates properties of light and its interaction with matter and develops devices based on these properties. Due to both the fundamental and applied nature of photonics research, it pervades many branches of modern technology: quantum mechanics, material science, electronics, telecommunications, biology, medicine, material processing, etc. The borders between these subjects are being erased, generating new research areas such as silicon photonics, biophotonics and quantum photonics. Diverse branches of photonics are united in a common effort to further miniaturize photonic devices, integrate them with existing technologies and develop new technologies. The International School and Conference on Photonics—Photonica—is a biennial forum for the education of young scientists, exchanging new knowledge and ideas, and fostering collaboration between scientists working in photonic science and technology. Conference topics cover a broad range of research activities in optical materials, metamaterials and plasmonics, nonlinear optics, lasers, laser spectroscopy, biophotonics, optoelectronics, optocommunications, photonic crystals, holography, quantum optics and related topics in atomic physics. The aim of the organizers is to provide a platform for discussing new developments, concepts and future trends of various disciplines of photonics by bringing together researchers from academia, government and industrial laboratories. The educational element of Photonica—a series of tutorials and keynote talks—enables students and young researchers to better understand the fundamentals and their use on a route to applications, and informs both young and experienced scientists of new directions of research. The introductory lectures that are directly related to the state-of-the-art are followed by presentations and discussions on recent results during oral and vibrant poster presentations. This Topical Issue is dedicated to Photonica 2011 held on 29 August-2 September 2011 in Belgrade, Serbia. The conference was attended by 144 participants from 27 countries who gave 132 oral and poster presentations and 24 lectures. The accompanying papers were peer reviewed and 82 were selected for publication. We take this opportunity to gratefully acknowledge the contribution of the reviewers to the quality of this issue. The papers are grouped in accordance with the conference topics, each section opening with an invited paper. The issue begins with papers dedicated to ultra-cold atomic systems that display coherent behaviour analogous to that of light. These well-controlled atomic systems are indispensible workhorses for experiments in quantum optics, which is the topic of the next section. Holography as a concept, measurement tool and technique for fabrication of periodic photonic structures is placed accordingly between fundamental and applied photonics. It is followed by reports on various photonic devices, their modelling and nonlinear phenomena. The progress in constructing these devices largely depends on artificial (composites, metamaterials) and natural optical materials and their processing. This Topical Issue is an original snapshot of the current research in photonics and by no means an extensive survey of the field. While the making of the former has been a challenging task, the compilation of the latter would be indomitable due to the rapid advances in and diversification of photonics research. In accordance with the aims of the conference itself, we hope that the results reported in this Topical Issue of Physica Scripta will serve to inform and to spark the imagination of scientists and engineers exploring or using the principles and products of photonics.

Material science and Condensed matter Physics. 8th International Conference. Abstracts.

NASA Astrophysics Data System (ADS)

Kulyuk, L. L.; Paladi, Florentin; Canter, Valeriu; Nikorich, Valentina; Filippova, Irina

2016-08-01

The book includes the abstracts of the communications presented at the 8th International Conference on Materials Science and Condensed Matter Physics (MSCMP 2016), a traditional biennial meeting organized by the Institute of Applied Physics of the Academy of Sciences of Moldova (IAP).A total of 346 abstracts has been included in the book. The Conference programm included plenary lectures, topical keynote lectures, contributed oral and poster presentations distributed into 7 sections: * Condensed Matter Theory; * Advanced Bulk Materials; * Design and Structural Characterization of Materials; * Solid State Nanophysics and Nanotechnology; * Energy Conversion and Storage. Solid State Devices; * Surface Engineering and Applied Electrochemistry; * Digital and Optical holography: Materials and Methods. The abstracts are arranged according to the sections mentioned above. The Abstracts book includes a table of matters at the beginning of the book and an index of authors at the finish of the book.

PREFACE: 17th Russian Youth Conference on Physics and Astronomy (PhysicA.SPb/2014)

NASA Astrophysics Data System (ADS)

Averkiev, Nikita S.; Poniaev, Sergey A.; Sokolovskii, Grigorii S.

2015-12-01

The seventeenth Russian Youth Conference on Physics and Astronomy (PhysicA.SPb) was held from 28-30 October 2014 in Saint Petersburg, Russia. The Conference continues the tradition of Saint Petersburg Seminars on Physics and Astronomy originating from the mid-1990s. Since then PhysicA.SPb maintains both the scientific and educational quality of contributions delivered to the young audience. This is the main feature of the Conference that makes it possible to combine the whole spectrum of modern Physics and Astronomy within one event. PhysicA.SPb/2014 has brought together more than 200 students, young scientists and their professor colleagues from many universities and research institutes across the whole of Russia as well as from Belarus, Ukraine, Finland, the Netherlands, France and Germany. Oral and poster presentations were combined into the well-defined sections of Astronomy and Astrophysics, Optics and spectroscopy, Physics of ferroics, Nanostructured and thin-film materials, Mathematical physics and numerical methods, Biophysics, Plasma physics, hydro- and aero-dynamics, and Physics of quantum structures. This volume of Journal of Physics: Conference Series presents the extended contributions from participants of PhysicA.SPb/2014 that were peer-reviewed by expert referees through processes administered by the Presiders of the Organising and Programme Committees to the best professional and scientific standards.

The Design and Evaluation of African Language Learning Materials. Proceedings of the Spring 1984 Conference on Developing Guidelines for the Evaluation of African Language Learning Materials (East Lansing, Michigan, April 13-14, 1984).

ERIC Educational Resources Information Center

Dwyer, David J., Ed.

Representatives from major institutions teaching African languages convened to discuss the design of African language textbooks and to propose guidelines for the writing of new textbooks and evaluation of existing ones. Conference papers include: "Language Acquisition Theory and Materials Construction" (Stephen Krashen); "The Structures of Verbal…

SEPG Europe 2012 Conference Proceedings

DTIC Science & Technology

2012-09-01

Process Management http://www.sei.cmu.edu SEI markings v3.2/ DM-0000022 / 30 August 2011 Copyright 2012 Carnegie Mellon University This material...Change Management Decisions in Large Enterprise Transformation Programs 18 3.1 Abstract 18 3.2 Introduction 18 3.3 Barriers for Transformation 18...Case Study #3: Enterprise Transformation Through Enterprise Data Management (Investment and Asset Management ) 25 3.7 Conclusions and Recommendations 27

Defense Conference on Nondestructive Testing (28th), 27-29 November 1979

DTIC Science & Technology

1979-11-29

58 ’.Microencapsulated Penetrants, A Now Approach to Penetrant Inspection" • ........ Albert Olevitch, Wright- Patterson AEB, OH...J. Watts, Warren, MI 48090 ......................... 140 "Using NDT Methods to Influence the Aircraft Design Process,’ William L Andre, Moffett Field...Albert Olevitch Air Force Materialý Laboratory Attn: AFML/MXE Wright- Patterson AFB, OH 45433 Autovon 785-3691 ABSTRACT This paper describes the work

Annual Fuze Conference and Munitions Technology Symposium VI (43rd)

DTIC Science & Technology

1999-04-07

part manufacture and assembly and identify the parameters that we must control through production. Analyzing the coefficients of variation and the...processing energetic materials. The extruder is equipped with four independent temperature control zones, segmented screws, a jacketed die block capable of...and has vacuum capability. Data monitoring capabilities include melt temperature and pressure, torque, screw speed, and temperatures in all of the

Proceedings of the 1983 Scientific Conference on Obscuration and Aerosol Research

DTIC Science & Technology

1984-07-01

Aerosol Measurement Spheroids Laser Pulses Target Signatures Optical Pulses Pulse Propagation Clouds Laser Radiation Transport Analysis...Schematic diagram of apparatus used to make ATR measurements . (a) Top view of components. Solid line is path of laser radiation, broken line is path of...fabricated to measure the extinction properties of these materials for CO2 laser radiation. The selection process and preparation of the

Preliminary Reports, Memoranda and Technical Notes of the Materials Research Council Summer Conference, La Jolla, California

DTIC Science & Technology

1986-07-01

also known. 27 For Li, Na, K, Rb, and Cs plus C02, one observes 28,29 species like -N [M+ , C021, [ M+ , (C02 )2"] and, ultimately, the metal oxalate ...many opportunities for significant research on hydrothermal processes, e.g., the preparation of clean oxide powders for ceramic uses. We believe the high

PREFACE: International Conference on Structural Nano Composites (NANOSTRUC 2012)

NASA Astrophysics Data System (ADS)

Njuguna, James

2012-09-01

Dear Colleagues It is a great pleasure to welcome you to NanoStruc2012 at Cranfield University. The purpose of the 2012 International Conference on Structural Nano Composites (NanoStruc2012) is to promote activities in various areas of materials and structures by providing a forum for exchange of ideas, presentation of technical achievements and discussion of future directions. NanoStruc brings together an international community of experts to discuss the state-of-the-art, new research results, perspectives of future developments, and innovative applications relevant to structural materials, engineering structures, nanocomposites, modelling and simulations, and their related application areas. The conference is split in 7 panel sessions, Metallic Nanocomposites and Coatings, Silica based Nanocomposites, safty of Nanomaterials, Carboin based Nanocomposites, Multscale Modelling, Bio materials and Application of Nanomaterials. All accepted Papers will be published in the IOP Conference Series: Materials Science and Engineering (MSE), and included in the NanoStruc online digital library. The abstracts will be indexed in Scopus, Compedex, Inspec, INIS (International Nuclear Information System), Chemical Abstracts, NASA Astrophysics Data System and Polymer Library. Before ending this message, I would like to acknowledge the hard work, professional skills and efficiency of the team which ensured the general organisation. As a conclusion, I would like to Welcome you to the Nanostruc2012 and wish you a stimulating Conference and a wonderful time. On behalf of the scientific committee, Signature James Njuguna Conference Chair The PDF of this preface also contains committee listings and associates logos.

CONFERENCE LEADERSHIP.

ERIC Educational Resources Information Center

Louisiana State Vocational Curriculum Development and Research Center, Natchitoches.

THIS INSTRUCTIONAL MATERIAL IS FOR USE BY PERSONS WHO CONDUCT CONFERENCE LEADER TRAINING PROGRAMS. SPECIFICALLY, ITS PURPOSE IS TO TRAIN VOCATIONAL TRADE AND INDUSTRIAL EDUCATION PEOPLE TO CONDUCT TRAINING CONFERENCES FOR INDUSTRY. IT IS INTENDED FOR USE IN AREA VOCATIONAL SCHOOLS IN THE PROMOTION AND DEVELOPMENT OF SUPERVISORY PERSONNEL…

PREFACE: 1st International Conference in Applied Physics and Materials Science

NASA Astrophysics Data System (ADS)

2015-06-01

We are delighted to come up with thirty two (32) contributed research papers in these proceedings, focusing on Materials Science and Applied Physics as an output of the 2013 International Conference in Applied Physics and Materials Science (ICAMS2013) held on October 22-24, 2013 at the Ateneo de Davao University, Davao City, Philippines. The conference was set to provide a high level of international forum and had brought together leading academic scientists, industry professionals, researchers and scholars from universities, industries and government agencies who have shared their experiences, research results and discussed the practical challenges encountered and the solutions adopted as well as the advances in the fields of Applied Physics and Materials Science. This conference has provided a wide opportunity to establish multidisciplinary collaborations with local and foreign experts. ICAMS2013, held concurrently with 15th Samahang Pisika ng Visayas at Mindanao (SPVM) National Physics Conference and 2013 International Meeting for Complex Systems, was organized by the Samahang Pisika ng Visayas at Mindanao (Physics Society of Visayas and Mindanao) based in MSU-Iligan Institute of Technology, Iligan City, Philippines. The international flavor of converging budding researchers and experts on Materials Science and Applied Physics was the first to be organized in the 19 years of SPVM operation in the Philippines. We highlighted ICAMS2013 gathering by the motivating presence of Dr. Stuart Parkin, a British Physicist, as one of our conference's plenary speakers. Equal measures of gratitude were also due to all other plenary speakers, Dr. Elizabeth Taylor of Institute of Physics (IOP) in London, Dr. Surya Raghu of Advanced Fluidics in Maryland, USA and Prof. Hitoshi Miyata of Niigata University, Japan, Prof. Djulia Onggo of Institut Teknologi Bandung, Indonesia, and Dr. Hironori Katagiri of Nagaoka National College of Technology, Japan. The warm hospitality of the host university, Ateneo de Davao University, Davao City, Philippines blended with the overwhelming enthusiasm of the conference speakers, participants, and the unwavering support of the conference sponsors and donors and the administration of the MSU-Iligan Institute of Technology, Iligan City, Philippines, all have brought realization to the production of these proceedings.

PREFACE: 5th International EEIGM/AMASE/FORGEMAT Conference on Advanced Materials Research

NASA Astrophysics Data System (ADS)

Ayadi, Zoubir; Czerwiec, Thierry; Horwat, David; Jamart, Brigitte

2009-07-01

This issue of IOP Conference Series: Materials Science and Engineering, contains manuscripts of talks that will be presented at the 5th International EEIGM/AMASE/FORGEMAT Conference on Advanced Materials Research that will be held at the Ecole Européenne d'Ingénieurs en Génie des Matériaux - European School of Materials Science and Engineering (EEIGM) in Nancy on November 4-5 2009. The conference will be organized by the EEIGM. The aim of the conference is to bring together scientists from the six European universities involved in the EEIGM and in the ''Erasmus Mundus'' AMASE Master (Advanced Materials Science and Engineering) programmes and in the Tempus FORGEMAT European project: Nancy-Université - EEIGM/INPL (Nancy, France), Universität des Saarlandes (Saarbrücken, Germany), Universitat Politècnica de Catalunya - ETSEIB (Barcelona, Spain), Luleå Tekniska Universitet (Luleå, Sweden), Universidad Politecnica de Valencia - ETSII (Valencia, Spain) and AGH University of Science and Technology, (Kralow, Poland). This conference is also open to other universities who have strong links with the EEIGM and it will provide a forum for exchange of ideas, cooperation and future directions by means of regular presentations, posters and a round-table discussion. After careful refereeing of all manuscripts, equally shared between the four editors, 26 papers have been selected for publication in this issue. The papers are grouped together into different subject categories: polymers, metallurgy, ceramics, composites and nanocomposites, simulation and characterization. The editors would like to take this opportunity to thank all the participants who submitted their manuscripts during the conference and responded in time to the editors' request at every stage from reviewing to final acceptance. The editors are indebted to all the reviewers for painstakingly reviewing the papers at very short notice. Special thanks are called for the sponsors of the conference including EEIGM-INPL, Grand Nancy, Ville de Nancy, Region Lorraine, Université Franco-Allemande and Institut Jean Lamour. Proceedings Editors: Zoubir Ayadi, Thierry Czerwiec, David Horwat and Brigitte Jamart

PREFACE: 10th International Conference on Materials and Mechanisms of Superconductivity (M2S-X)

NASA Astrophysics Data System (ADS)

Greene, L. H.; Zhu, J.-X.; Wang, H.; Meen, J.; Lorenz, B.; Dong, X. L.; dela Cruz, C. R.; Carlson, E.; Bud'ko, S. L.; Bauer, E.; Paglione, J.

2013-07-01

The 2012 Materials and Mechanisms of Superconductivity Conference (M2S 2012), which occurs every three years, brought together world experts and young scientists to discuss open questions in the fundamental physics and applications of superconductors, and to disseminate the latest theoretical and experimental research results in superconductors and related novel materials. This conference of 600 participants acted as a valuable training ground in this technologically important area. We focused on key unanswered questions in high-temperature cuprate superconductors, high-temperature iron-based superconductors, topological superconductors, organic superconductors, and heavy-electron superconductors. The discovery of new materials and novel technological applications for electronic devices and for energy transmission and storage was emphasized. There were special sessions on superconductivity and energy, and outreach sessions, and an evening public lecture. There were also junior researcher symposia interspersed within the conference, thus providing an ideal environment for advanced graduate students and postdoctoral researchers to explore the latest theoretical and experimental methods used to investigate challenging questions in the physics of materials as it relates to both fundamental science and technological applications. These proceedings are an archival testament to the excitement in the field and provide a valuable snapshot of the cutting-edge research of 2012. We hope this will be a valuable resource to active researchers in the field as well as an encouraging volume to excite new researchers to the ever-growing, multifaceted field of superconductivity. We thank Bernd Lorenz and his Publications Committee for their tremendously creative and diligent work in putting this volume together. This Conference would not have been possible without the tireless work of our Program Committee, Chaired by Rick Greene and Co-Chaired by Mike Norman. Becky McDuffee, our Conference Secretary, deserves special mention for her Olympian efforts. And of course, many thanks to all of our ~600 participants, who made this entire conference such a success. George Crabtree Laura Greene Peter Johnson The PDF also contains the organizing, program and publication committees, prize winners, conference photographs, sponsors and supporters.

PREFACE: 4th Global Conference on Materials Science and Engineering (CMSE 2015)

NASA Astrophysics Data System (ADS)

Ruda, H. E.; Khotsianovsky, A.

2015-12-01

IOP Conference Series: Materials Science and Engineering is publishing a volume of conference proceedings that contains a selection of papers presented at the 4th Global Conference on Materials Science and Engineering (CMSE 2015), which is an annual event that started in 2012. CMSE 2015, technically supported by the Institute of Applied Physics and Materials Engineering of University of Macau, organized by Wuhan Advance Materials Society, was successfully held at the University of Macau-new campus located on Hengqin Island from August 3rd-6th, 2015. It aims to bring together leading academic scientists, researchers and scholars to exchange and share their experience and research results on all aspects of Materials Science and Engineering, and to discuss the practical challenges encountered and the solutions adopted. Macau, one of the two special administrative regions of the People's Republic of China, where East meets West, turned out to be an ideal meeting place for domestic and overseas participants of this annual international conference. The conference program included keynote presentations, special sessions, oral and poster contributions. From several hundred submissions, 52 of the most promising and mainstream, IOP-relevant, contributions were included in this volume. The submissions present original ideas or results of general significance, supported by clear reasoning, compelling evidence and methods, theories and practices relevant to the research. The authors state clearly the problems and the significance of their research to theory and practice. Being a successful conference, this event gathered more than 200 qualified and high-level researchers and experts from over 40 countries, including 10 keynote speakers from 6 countries, which created a good platform for worldwide researchers and engineers to enjoy the academic communication. Taking advantage of this opportunity, we would like to thank all participants of this conference, and particularly the authors of all accepted papers for their high quality and fruitful contributions. Special thanks are due to all reviewers for their careful critical reading of the manuscripts and useful comments and suggestions. We do hope that this volume will be beneficial for readers to their future research endeavours and careers. We also gratefully acknowledge tremendous efforts and dedication of many individuals, especially CMSE Conference Secretary Ms. Liu Qin, Editor Anete Ashton and all the Editorial Board members in IOP Publishing for their support in producing the proceedings of this event. Guest Editors: Prof. Harry E. Ruda University of Toronto, Canada Dr. Alexander Khotsianovsky Pisarenko Institute of Problems of Strength of the National Academy of Sciences of Ukraine, Ukraine

PREFACE: Innovations in Thin Film Processing and Characterisation

NASA Astrophysics Data System (ADS)

Henrion, Gérard; Belmahi, Mohammed; Andrieu, Stéphane

2010-07-01

This special issue contains selected papers which were presented as invited or contributed communications at the 4th International Conference on Innovation in Thin Film Processing and Characterization (ITFPC'09) which was held on 17-20 November, 2009 in Nancy (France) Jointly organized by the French Vacuum Society and the Institut Jean Lamour-a joint research unit specialized in materials, metallurgy, nano-sciences, plasmas and surfaces-the ITFPC conferences aim at providing an open forum to discuss the progress and latest developments in thin film processing and engineering. Invited lectures aim particularly at providing overviews on scientific topics while contributed communications focus on particular cutting-edge aspects of thin film science and technology, including CVD, PVD and ion beam assisted processes. The 2009 conference was organized along the 6 main following topics: Thin films processing and surface engineering Numerical simulation and thin film characterization Protective applications of thin films Energy, environment and health applications of thin films Micro- and nano-patterning of thin films New properties and applications resulting from patterned thin films which were completed by a special half day session devoted to industry-supported innovation. 180 scientists from 20 worldwide countries attended the different sessions along with the 9 invited lectures and 130 contributions were given. Besides the outstanding scientific program, a half-day tutorial session preceded the conference. During the short courses, emphasis was laid on: Lithography for thin film patterning Mechanical properties of thin films Principles and applications of reactive sputtering processes. The French Vacuum Society granted financial aid to PhD students who applied for it in order to encourage the participation of young scientists. The 19 papers published in this volume were accepted for publication after peerreviewal as for regular papers. As chairmen of this conference, we gratefully acknowledge all referees for their valuable work sometimes with a rather short delay. We also express our gratitude to the international members of the scientific committee who actively contributed to ensure an attractive program in proposing invited speakers; it was a difficult task for them to select only 9 out of the large number of proposed recognized experts. Finally, ITFPC'09 would not have been successful without the strong involvement and implication of the local organizing committee and the support of our partners. They will all find here our sincere thanks. Gérard Henrion, Mohammed Belmahi and Stéphane Andrieu Co-chairmen of the ITFPC-09 Conference.

PREFACE: Proceedings of the International Conference on Optical, Optoelectronic and Photonic Materials and Applications (ICOOPMA) 2014

NASA Astrophysics Data System (ADS)

Sweeney, Stephen J.; Jha, Animesh

2015-06-01

Developments in the connected fields of optics, optoelectronics and photonics have had a profound effect on the emergence of modern technologies and their influence on our lives. In all of these fields, understanding and improving the basic underlying materials is of crucial importance for the development of systems and applications. The International Conference on Optical, Optoelectronic and Photonic Materials and Applications (ICOOPMA) has successfully married these fields and become a regular feature in the conference calendar. The 6th conference in the series, held at the University of Leeds from 27th July - 1st August, 2014, continued the ICOOPMA tradition and attracted 220 international delegates with a diverse range of disciplines and interests. The 59 papers in this Proceedings provide an excellent overview of the topics presented. The conference consisted of four thematic areas in the fields of inorganic semiconductors, carbon and polymeric materials, inorganic glasses and crystalline materials, and metamaterials and plasmonics where each theme area included research on basic materials through to device applications. The conference began with a Workshop organised by Professor Dan Hewak (University of Southampton) with speakers covering Organic Optoelectronic Complexes (Dr Richard Curry, University of Surrey), Metamaterials (Dr Vassili Fedotov, University of Southampton), Graphene (Dr Monica Craciun, University of Exeter) and Amorphous Semiconductors (Dr Jiri Orava, University of Cambridge and Tohoku University). This provided an excellent overview of a representative range of the important topics that were discussed further at the conference. The conference included a banquet which successfully combined excellent food with a relaxing opportunity for the conference delegates to socialise and network. The pinnacle of the evening was the after dinner speech given by our distinguished guest, Professor Sir David Payne (University of Southampton), who gave a highly informative and humorous history of the development of photonics and the important role played by optical fibres, of which he was one of the key pioneers. Emerging scientific talent was also given a platform, with a particular feature of the conference being the Young Scientists Forum, organised by Dr Senthil Ganapathy (University of Southampton), consisting of a series of themed sessions providing up-and-coming researchers a opportunity to present and discuss their work. Each technical theme of the conference was introduced with Plenary lectures delivered by leading international figures in their respective fields. Professor Jim Harris (Stanford University) discussed the development of epitaxially grown dilute-nitride semiconductors and the important role that they play in high efficiency solar cells. This theme was continued by Professor Wolfgang Stolz (Philipps University, Marburg) who described the use of novel III-V semiconductors for the development of lasers on silicon. Dr Jerry Meyer (Naval Research Laboratories) and Dr Kumar Patel (Pranalytica) discussed the important field of mid-infrared devices highlighting the significant developments that have been made in inter-band cascade and quantum cascade based devices, respectively and which have wide-ranging applications in sensing. Professor Neil Greenham (University of Cambridge) discussed solution-based semiconductors based on conjugated polymers and nanocrystals offering low cost routes to the wide-scale deployment of photonics. Professor Ortwin Hess (Imperial College) gave an overview of the physics and fascinating technological potential of negative refractive index materials. Professor Stephen Elliott (University of Cambridge) discussed the optoelectronic properties of phase change materials for memories. These areas were expanded upon in over 70 invited talks from international speakers highlighting recent developments in each of these areas. Further detailed discussions were presented in many parallel Oral and Poster sessions. This Proceedings provides an exciting and wide-ranging discussion of the topics presented at ICOOPMA 2014. We are very grateful to the many people who helped with the organisation of the conference, with particular thanks to Alison Whiteley and her team who enabled the smooth running of the conference, Dr Senthil Ganapathy for his many and wide ranging contributions to the conference and finally Professor Safa Kasap for his wisdom, advice and strong support. The conference could not have happened without the commitment of the Local Organising Committee, who helped in many ways to assemble and run the conference, and for the International Programme, Advisory and Steering committees who guided the technical direction of the conference and assisted with the conference programme and proceedings. We are also extremely pleased to have received generous sponsorship from a large number of organisations and companies. Finally, we are also very grateful to Sarah Toms and the Editorial staff at the Institute of Physics, and the many contributors and reviewers for helping us to put-together this proceedings. Stephen Sweeney, Guildford, UK Animesh Jha, Leeds, UK

International Materials Research Meeting in the Greater Region: “Current Trends in the Characterisation of Materials and Surface Modification”

NASA Astrophysics Data System (ADS)

2017-10-01

Preface Dear ladies and gentlemen, On 6th and 7th of April 2017 took place the “International Materials Research Meeting in the Greater Region” at the Saarland University, Saarbrücken, Germany. This meeting corresponded to the 9th EEIGM International Conference on Advanced Materials Research and it was intended as a meeting place for researchers of the Greater Region as well as their partners of the different cooperation activities, like the EEIGM program, the ‘Erasmus Mundus’ Advanced Materials Science and Engineering Master program (AMASE), the ‘Erasmus Mundus’ Doctoral Program in Materials Science and Engineering (DocMASE) and the CREATe-Network. On this meeting, 72 participants from 15 countries and 24 institutions discussed and exchanged ideas on the latest trends in the characterization of materials and surface modifications. Different aspects of the material research of metals, ceramics, polymers and biomaterials were presented. As a conclusion of the meeting, the new astronaut of the European Space Agency Dr. Matthias Maurer, who is an alumni of the Saarland University and the EEIGM, held an exciting presentation about his activities. Following the publication of selected papers of the 2009 meeting in Volume 5 and 2012 meeting in Volume 31 of this journal, it is a great pleasure to present this selection of 9 articles to the readers of the IOP Conference Series: Materials Science and Engineering. The editors are thankful to all of the reviewers for reviewing the papers. Special praise is also given to the sponsors of the conference: European Commission within the program Erasmus Mundus (AMASE and DocMASE), Erasmus+ (AMASE), and Horizon2020 (CREATe-Network, Grant agreement No 644013): the DAAD (Alumni Program), and the German-French University (PhD-Track). List of Author signatures, Conference topics, Organization, Conference impressions and list of the participants are available in this PDF.

Research in Structures, Structural Dynamics and Materials, 1990

NASA Technical Reports Server (NTRS)

Barthelemy, Jean-Francois M. (Compiler); Noor, Ahmed K. (Compiler)

1990-01-01

The Structural Dynamics and Materials (SDM) Conference was held on April 2 to 4, 1990 in Long Beach, California. This publication is a compilation of presentations of the work-in-progress sessions and does not contain papers from the regular sessions since those papers are published by AIAA in the conference proceedings.

[Probability, Cambridge Conference on School Mathematics Feasibility Study No. 7.

ERIC Educational Resources Information Center

Davis, R.

These materials were written with the aim of reflecting the thinking of the Cambridge Conference on School Mathematics (CCSM) regarding the goals and objectives for school mathematics. They represent a practical response to a proposal by CCSM that some elements of probability be introduced in the elementary grades. These materials provide children…

Full Participation in Independent Living: What Does It Mean? A National Teleconference (September 25, 2002). Participant's Manual.

ERIC Educational Resources Information Center

Nary, Dot; White, Glen; Jones, Darrell Lynn; Buppapong, Raweewan; Petty, Richard; Heinsohn, Dawn; Langbehn, Kristy

This manual contains training materials on full participation in independent living for a national conference for personnel in agencies concerned with independent living for people with disabilities. Preliminary materials include the conference agenda, background information about the trainers, and organizational information on Independent Living…

Touch the Future: Discovering Abilities through Technology for Living, Learning, Working and Playing. Southeast Regional Conference (3rd, Atlanta, Georgia, April 10-12, 1991).

ERIC Educational Resources Information Center

Georgia State Dept. of Human Resources, Atlanta. Div. of Rehabilitation Services.

This packet of materials was originally intended for participants in a 1991 conference on assistive technology for the disabled. After a detailed listing of the conference schedule, individual sections provide abstracts, biographical sketches, and summaries concerning the following conference topics: blending, computer labs, family, grants and…

Meeting the Needs of Youth at Risk: Public Policy and Interagency Collaboration. Conference Proceedings (Portland, Oregon, March 4-5, 1987).

ERIC Educational Resources Information Center

Crohn, Leslie

This document contains materials from a conference designed to examine policy issues related to potential dropouts, youth offenders, drug and alcohol abusers, teenage parents, young children at risk, unemployed youth, and compensatory education. A brief overview of the 2-day conference is followed by summaries of each of the conference's…

It's Time to Revamp the Parent-Teacher Conference Process: Let's Include the Child!

ERIC Educational Resources Information Center

Boazman, Janette

2014-01-01

This article focuses on the fact that very often the traditional parent-teacher conference process is missing the most important stake holder, the child. The author asks the reader to clear the traditional image of parent-teacher conferences from their mind and imagine a conference process and setting that has the potential to bring together…

Preface: phys. stat. sol. (c) 1/7

NASA Astrophysics Data System (ADS)

Cheikhrouhou, Abdelwaheb

2004-05-01

The Third International Conference on Magnetic and Superconducting Materials (MSM03) belongs to a series of conferences, held biannually, aiming at providing a forum to the scientists in the magnetic and superconducting materials areas over the world.The first conference of the series (MSM99) was held in Iran with the proceedings published by World Scientific in 2000, and the second conference (MSM01) was held in Jordan with the proceedings published in Physica B 321 (2002).MSM03 was organized by the Materials Physics Laboratory, Sfax University (Laboratoire de Physique des Matériaux de la Faculté des Sciences de Sfax), with many domestic and international supporting institutions. It was held in Monastir (Tunisia), 1-4 September 2003, with over 150 participants and keynote lecturers attending from the following countries: Algeria, Austria, China, Czech Republic, Egypt, France, Germany, Hungary, Iran, Italy, Japan, Jordan, Morocco, Netherlands, Pakistan, Poland, Russia, Spain, Sudan, Sultanate of Oman, Taiwan, Tunisia, United Kingdom and United States of America.Altogether, about 170 papers on a variety of subjects relevant to the topic of the conference were presented, out of which 42 were keynote lectures. The submissions were peer-reviewed, and ultimately 115 articles were selected for publication in this journal. However, it must be noted that 13 of 39 keynote speakers did not submit their manuscripts for publication. Invited and other speakers were distinguished members of the international scientific community who are interested in pure sciences and materials research, and involved in the fabrication, characterization and investigation of the physical properties of magnetic and superconducting materials. High-caliber scientists attended the conference contributing to its success and the event resulted in new international relationships in research and cooperation. The Chairman of the Organizing Committee was Professor Abdelwaheb Cheikhrouhou, Materials Physics Laboratory, Sciences Faculty of Sfax (Tunisia) and the Co-Chairmen were Professor Sami Mahmood, Dean of Sciences at Yarmouk University (Jordan) and Professor Mohamed Akhavan from the Sharif University of Technology (Iran). The four-day conference consisted of several oral and poster sessions, followed by social programs in the evenings. The success of the event could be measured during the closing session on the last day, when several delegates emphasized the high-quality science that had been evident at the conference. A post conference three-day tour to the south of Tunisia (Matmata, Douz City: the gate of desert and the mountains oasis: Tamerza, Mides and Chebika) was also arranged. The conference was generously sponsored by: - The Tunisian Ministry of High Education, Scientific Research and Technology - The Tunisian Secretary of State for Scientific Research and Technology - The Tunisian National Office of Tourism - The Abdus Salam International Centre for Theoretical Physics (ICTP) - French Institute for Cooperation in Tunisia - Tunisian-Italian Scientific Partnership - British Gas - Tunisian Society for Electricity and Gas - Imex Olive Oil -Confiserie TRIKI Le Moulin The next MSM conference in 2005 will be held in Morocco.

The Conference on High Temperature Electronics

NASA Technical Reports Server (NTRS)

Hamilton, D. J.; Mccormick, J. B.; Kerwin, W. J.; Narud, J. A.

1981-01-01

The status of and directions for high temperature electronics research and development were evaluated. Major objectives were to (1) identify common user needs; (2) put into perspective the directions for future work; and (3) address the problem of bringing to practical fruition the results of these efforts. More than half of the presentations dealt with materials and devices, rather than circuits and systems. Conference session titles and an example of a paper presented in each session are (1) User requirements: High temperature electronics applications in space explorations; (2) Devices: Passive components for high temperature operation; (3) Circuits and systems: Process characteristics and design methods for a 300 degree QUAD or AMP; and (4) Packaging: Presently available energy supply for high temperature environment.

The Conference on High Temperature Electronics

NASA Astrophysics Data System (ADS)

Hamilton, D. J.; McCormick, J. B.; Kerwin, W. J.; Narud, J. A.

The status of and directions for high temperature electronics research and development were evaluated. Major objectives were to (1) identify common user needs; (2) put into perspective the directions for future work; and (3) address the problem of bringing to practical fruition the results of these efforts. More than half of the presentations dealt with materials and devices, rather than circuits and systems. Conference session titles and an example of a paper presented in each session are (1) User requirements: High temperature electronics applications in space explorations; (2) Devices: Passive components for high temperature operation; (3) Circuits and systems: Process characteristics and design methods for a 300 degree QUAD or AMP; and (4) Packaging: Presently available energy supply for high temperature environment.

Preliminary Reports, Memoranda and Technical Notes of the Materials Research Council Summer Conference, La Jolla, California

DTIC Science & Technology

1983-07-01

Multilayer Thin Film materials M. S. Wrighton ...................................... 26 •.. Line Defects in Langmuir - Blodgett Films J. P. Hirth...of Langmuir and Blodgett can be used to prepare monolayers and multilayers of organic materials on a o, variety of substrates. The films of organic...references therein. * 2. Cf. Thin Solid Films, 99, (1982) from the proceedings of the "* . International Conference on Langmuir - Blodgett Films held

Special Sessions: International Conference on Rehabilitation Engineering (2nd, Ottawa, Canada, June 17-22, 1984). Combined with RESNA 7th Annual Conference = Seances speciales: conference internationale sur la technologie de reeducation fonctionnelle (2nd, Ottawa, Canada, Juin 17-22, 1984). Tenue parallelement a la RESNA 7e conference annuelle.

ERIC Educational Resources Information Center

Rehabilitation Engineering Society of North America, Washington, DC.

These proceedings of the conference's Special Sessions contain 85 papers organized into the following sections: "Implant Materials and Devices,""Communication Aids,""Neural Prosthetics for the Disabled,""Current Concepts in Spinal Cord Rehabilitation,""New Models in…

Looking on the bright side: biased attention and the human serotonin transporter gene.

PubMed

Fox, Elaine; Ridgewell, Anna; Ashwin, Chris

2009-05-22

Humans differ in terms of biased attention for emotional stimuli and these biases can confer differential resilience and vulnerability to emotional disorders. Selective processing of positive emotional information, for example, is associated with enhanced sociability and well-being while a bias for negative material is associated with neuroticism and anxiety. A tendency to selectively avoid negative material might also be associated with mental health and well-being. The neurobiological mechanisms underlying these cognitive phenotypes are currently unknown. Here we show for the first time that allelic variation in the promotor region of the serotonin transporter gene (5-HTTLPR) is associated with differential biases for positive and negative affective pictures. Individuals homozygous for the long allele (LL) showed a marked bias to selectively process positive affective material alongside selective avoidance of negative affective material. This potentially protective pattern was absent among individuals carrying the short allele (S or SL). Thus, allelic variation on a common genetic polymorphism was associated with the tendency to selectively process positive or negative information. The current study is important in demonstrating a genotype-related alteration in a well-established processing bias, which is a known risk factor in determining both resilience and vulnerability to emotional disorders.

Preface

NASA Astrophysics Data System (ADS)

Vargas, Helion

2005-06-01

The biennial International Conferences on Photoacoustic and Photothermal Phenomena (ICPPP) are widely recognized as the major venue for the dissemination of recent and significant research results in the traditional areas, as well as in new and exciting outgrowths of this interdisciplinary field. The ICPPP is concerned with the science, applications and technologies involving the optical, electron-beam or otherwise production, propagation and detection of acoustic, thermal and general diffusion-wave fields.

The International Congress of Mechanical Engineering and Agricultural Sciences - CIIMCA 2013

NASA Astrophysics Data System (ADS)

Remolina-Millán, Aduljay; Hernández-Arroyo, Emil

2014-06-01

The organizing committee of The International Congress of Mechanical Engineering and Agricultural Sciences - CIIMCA 2013 - are pleased to present CIIMCA-2013: the first international conference focused on subjects of materials science, mechanical engineering and renewable energy organized by Mechanical Engineering Faculty of the ''Universidad Pontificia Bolivariana'' in Bucaramanga, Colombia. This conference aims to be a place to produce discussions on whole topics of the congress, between the scientists of Colombia and the world. We strongly believe that knowledge is fundamental to the development of our countries. For that reason this multidisciplinary conference is looking forward to integrate engineering, agricultural science and nanoscience and nanotechnology to produce a synergy of this area of knowledge and to achieve scientific and technological developments. Agriculture is a very important topic for our conference; in Colombia, agricultural science needs more attention from the scientific community and the government. In the Faculty of Mechanical Engineering we are beginning to work on these issues to produce knowledge and improve the conditions in our country. The CIIMCA conference is a great opportunity to create interpersonal relationships and networks between scientists around the world. The interaction between scientists is very important in the process of the construction of knowledge. The general chairman encourages and invites you to make friends, relationships and participate strongly in the symposia and all program activities. PhD Aduljay Remolina-Millán Principal Chairman, International Mechanical Engineering and Agricultural Sciences Congress - CIIMCA Msc Emil Hernández-Arroyo Principal Chairman, International Mechanical Engineering and Agricultural Sciences Congress - CIIMCA Conference photograph Conference photograph 'Universidad Pontificia Bolivariana seccional Bucaramanga' host of the first International Mechanical Engineering and Agricultural Sciences Congress - CIIMCA 2013 - Floridablanaca, Colombia. Conference photograph Closure of CIIMCA 2013. Details of the editorial committee and acknowledgements are available in the PDF.

Frontiers in Human Information Processing Conference

DTIC Science & Technology

2008-02-25

Frontiers in Human Information Processing - Vision, Attention , Memory , and Applications: A Tribute to George Sperling, a Festschrift. We are grateful...with focus on the formal, computational, and mathematical approaches that unify the areas of vision, attention , and memory . The conference also...Information Processing Conference Final Report AFOSR GRANT # FA9550-07-1-0346 The AFOSR Grant # FA9550-07-1-0346 provided partial support for the Conference

Editorial

NASA Astrophysics Data System (ADS)

Goh, Gregory K. L.

2014-06-01

This special issue of the Journal of Solid State Chemistry is a peer-reviewed collection of papers presented at the 7th International Conference on Materials for Advanced Technologies (ICMAT2013), Symposium Q - Innovative processing of inorganic films and nanostructures of functional materials, organised by the Materials Research Society, Singapore and held at the Singapore International Convention & Exhibition Centre, Singapore, from 30 June to 5 July 2013. The symposium focused mainly on films, porous networks and nanostructures formed by innovative processing routes that reduce energy consumption, use new mediums, combine techniques or even innovative synthesis approaches. The understanding of film and nanostructure growth mechanisms and crystal shape control were also discussed. We acknowledge the invaluable contributions of all invited, oral and poster presenters. I also take this opportunity to thank reviewers from all over the world who kindly helped in reviewing the manuscripts and provided valuable comments, making the publication of this high quality issue possible.

Joint conference of iMEC 2015 (2nd International Manufacturing Engineering Conference & APCOMS 2015 (3rd Asia-Pacific Conference on Manufacturing Systems)

NASA Astrophysics Data System (ADS)

2016-02-01

The iMEC 2015 is the second International Manufacturing Engineering Conference organized by the Faculty of Manufacturing, Universiti Malaysia Pahang (UMP), held from 12-14th November 2015 in Kuala Lumpur, Malaysia, with a theme "Materials, Manufacturing and Systems for Tomorrow". For the first time, iMEC is organized together with 3rd Asia- Pacific Conference on Manufacturing System (APCOMS 2015) which owned by Fakulti Teknologi Industri, Institut Teknologi Bandung (ITB), Indonesia. This is an extended collaboration between UMP and ITB to intensify knowledge sharing and experiences between higher learning institutions. This conference (iMEC & APCOMS 2015) is a platform for knowledge exchange and the growth of ideas, particularly in manufacturing engineering. The conference aims to bring researchers, academics, scientists, students, engineers and practitioners from around the world together to present their latest findings, ideas, developments and applications related to manufacturing engineering and other related research areas. With rapid advancements in manufacturing engineering, iMEC is an appropriate medium for the associated community to keep pace with the changes. In 2015, the conference theme is “Materials, Manufacturing and Systems for Tomorrow” which reflects the acceleration of knowledge and technology in global manufacturing. The papers in these proceedings are examples of the work presented at the conference. They represent the tip of the iceberg, as the conference attracted over 200 abstracts from Malaysia, Indonesia, Japan, United Kingdom, Australia, India, Bangladesh, South Africa, Turkey and Morocco and 151 full papers were accepted in these proceedings. The conference was run in four parallel sessions with 160 presenters sharing their latest finding in the areas of manufacturing process, systems, advanced materials and automation. The first keynote presentation was given by Prof. B. S. Murthy (IIT, Madras) on "Nanomaterials with Exceptional Properties Synthesized through Top Down Approach”, which was warmly welcomed by an eager and highly motivated audience. The second keynote speaker was Prof. Ir. Dradjad Irianto (ITB, Indonesia) on “Collaborative Manufacturing for Small-medium Enterprises”. The organizers are very grateful to them for supporting the conference and sharing their latest research results with the conference participants. The conference organizers would like to express our sincere gratitude and thanks to the honorary chairman Prof. Dato, Dr. Daing Nasir Ibrahim and Prof. Dr. Wan Azhar Wan Yusoff and organizing committee members of iMEC2015, Assoc. Prof. Dr. A.K. Prasada Rao (chairman), Dr. Ing. Mohd Azmir Mohd Azhari (co-chairman), and all committee members Assoc. Prof. Dr. Ahmad Razlan Yusoff, Assoc. Prof. Dr. Ismed Iskandar, Dr Noraini Mohd Razali, Dr Muhammed Nafis Osman Zahid, Dr Noor Mazni Ismail, Dr Izwan Ismail, Dr Zamzuri Hamedon, Dr Faiz Mohd Turan, Ms Suraya Sulaiman and secretariat Miss Zuryaty, Mrs Wan Norshihah, Mr. Mohd Khairulnazri and Mr Rafilah and also a million thanks to the steering committee from APCOMS Prof. Dr. Kadarsyah Suryadi, Prof. Dr. Bermawi, P. Iskandar, Prof. Dr. Abdul Hakim Halim, Prof. Dr. Dradjad Irianto, Dr. TMA Ari Samadhi, Ir. I Made Dana Tangkas and APCOMS organizing committee Prof. Dr. Abdul Hakim Halim (chair), Dr. Rachmawati Wangsaputra (co-chair) and other committee members Dr. Iwan Inrawan Wiratmadja, Dr. Anas Ma'ruf, Dr. Sukoyo and Dr. Wisnu Aribowo. The editorial board are indebted to all of the reviewers who were willing to spend their precious time in reviewing the papers. Thanks also to all who contributed direct or indirectly in making this conference a success, especially Mr. Mohd Khairulnazri in helping the editors complete the proceedings. Dr. Zamzuri Hamedon Editor in-chief iMEC & APCOMS 2015 Associate Editors 1. Assoc. Prof. Dr. A.K. Prasada Rao 2. Assoc. Prof. Dr. Ahmad Razlan Yusoff 3. Dr. Ing. Mohd Azmir Mohd Azhari 4. Dr. Muhammed Nafis Osman Zahid 5. Dr. Faiz Mohd Turan

International Conference on Vacuum Ultraviolet Radiation Physics, 8th, Lunds Universitet, Sweden, Aug. 4-8, 1986, Proceedings

NASA Technical Reports Server (NTRS)

Nilsson, Per-Olof (Editor); Nordgren, Joseph (Editor)

1987-01-01

The interactions of VUV radiation with solids are explored in reviews and reports of recent theoretical and experimental investigations from the fields of atomic and molecular physics, solid-state physics, and VUV instrumentation. Topics examined include photoabsorption and photoionization, multiphoton processes, plasma physics, VUV lasers, time-resolved spectroscopy, synchrotron radiation centers, solid-state spectroscopy, and dynamical processes involving localized levels. Consideration is given to the fundamental principles of photoemission, spin-polarized photoemission, inverse photoemission, semiconductors, organic materials, and adsorbates.

Eighteenth Space Simulation Conference: Space Mission Success Through Testing

NASA Technical Reports Server (NTRS)

Stecher, Joseph L., III (Compiler)

1994-01-01

The Institute of Environmental Sciences' Eighteenth Space Simulation Conference, 'Space Mission Success Through Testing' provided participants with a forum to acquire and exchange information on the state-of-the-art in space simulation, test technology, atomic oxygen, program/system testing, dynamics testing, contamination, and materials. The papers presented at this conference and the resulting discussions carried out the conference theme 'Space Mission Success Through Testing.'

Proceedings of the 1984 Conference on Outdoor Recreation: A Landmark Conference in the Outdoor Recreation Field (1st, Bozeman, Montana, November 1-4, 1984).

ERIC Educational Resources Information Center

Miles, John C., Ed.; Watters, Ron, Ed.

This document consists of materials presented at a conference organized by representatives of university outdoor programs to discuss issues and exchange ideas about outdoor topics. Twenty-six papers were presented: (1) "Conference on Outdoor Recreation for the Disabled: Breaking the Stereotype" (Tom Whittaker and Sheila Brashear); (2)…

The Seventeenth Space Simulation Conference. Terrestrial Test for Space Success

NASA Technical Reports Server (NTRS)

Stecher, Joseph L., III (Compiler)

1992-01-01

The Institute of Environmental Sciences' Seventeenth Space Simulation Conference, 'Terrestrial Test for Space Success' provided participants with a forum to acquire and exchange information on the state of the art in space simulation, test technology, atomic oxygen, dynamics testing, contamination, and materials. The papers presented at this conference and the resulting discussions carried out the conference theme of 'terrestrial test for space success.'

20th Space Simulation Conference: The Changing Testing Paradigm

NASA Technical Reports Server (NTRS)

Stecher, Joseph L., III (Compiler)

1998-01-01

The Institute of Environmental Sciences' Twentieth Space Simulation Conference, "The Changing Testing Paradigm" provided participants with a forum to acquire and exchange information on the state-of-the-art in space simulation, test technology, atomic oxygen, program/system testing, dynamics testing, contamination, and materials. The papers presented at this conference and the resulting discussions carried out the conference theme "The Changing Testing Paradigm."

20th Space Simulation Conference: The Changing Testing Paradigm

NASA Technical Reports Server (NTRS)

Stecher, Joseph L., III (Compiler)

1999-01-01

The Institute of Environmental Sciences and Technology's Twentieth Space Simulation Conference, "The Changing Testing Paradigm" provided participants with a forum to acquire and exchange information on the state-of-the-art in space simulation, test technology, atomic oxygen, program/system testing, dynamics testing, contamination, and materials. The papers presented at this conference and the resulting discussions carried out the conference theme "The Changing Testing Paradigm."

32nd International Conference on the Physics of Semiconductors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chelikowsky, James

The International Conference on the Physics of Semiconductors (ICPS) continues a series of biennial conferences that began in the 1950's. ICPS is the premier meeting for reporting all aspects of semiconductor physics including electronic, structural, optical, magnetic and transport properties with an emphasis on new materials and their applications. The meeting will reflect the state of art in the semiconductor physics field and will serve as a forum where scholars, researchers, and specialists can interact to discuss future research directions and technological advancements. The conference typically draws 1,000 international physicists, scientists, and students. This is one of the largest sciencemore » meetings on semiconductors and related materials to be held in the United States.« less

Modelling large deformation and soil—water—structure interaction with material point method: Briefing on MPM2017 conference

NASA Astrophysics Data System (ADS)

Rohe, Alexander; Liang, Dongfang

2017-06-01

The 1st International Conference on the Material Point Method for "Modelling Large Deformation and Soil-Water-Structure Interaction" (MPM2017) was held in Delft, The Netherlands on 10-13 January 2017. This is the first conference organised by the Anura3D MPM Research Community, following a series of international workshops and symposia previously held in The Netherlands, UK, Spain and Italy, as part of the European Commission FP7 Marie-Curie project MPM-DREDGE. We are delighted to present seven contributions in this Special Column of the Journal of Hydrodynamics, and take this opportunity to announce that the 2nd conference, MPM2019, will be held in Cambridge, UK in January 2019.

Informal Geometry for Young Children; Cambridge Conference on School Mathematics; Feasibility Study No. 34b.

ERIC Educational Resources Information Center

Walter, Marion

These materials were written with the aim of reflecting the thinking of The Cambridge Conference on School Mathematics (CCSM) regarding the goals and objectives for school mathematics. These materials are intended to provide children with a variety of informal activities in intuitive geometry in the elementary school. Opportunities are provided…

Preface

NASA Astrophysics Data System (ADS)

De Hosson, Jeff Th. M.; Ali, Nasar; Fierro, Giuseppe; Aliofkhazraei, Mahmood; Chipara, Mircea

2016-09-01

The ;International Conference on Surfaces, Coatings and Nano-Structured Materials; (NANOSMAT) has rapidly emerged as the premier conference in the field of materials science, engineering, technology and all aspects of ;nano;. Since 2005, it has been very successfully organised in several European countries, including Portugal, Spain, Italy, France, Poland, Czech Republic, Ireland and also in USA, and in Asia, including Turkey and China.

Preface

NASA Astrophysics Data System (ADS)

De Hosson, Jeff Th. M.; Ali, Nasar; Fierro, Giuseppe; Aliofkhazraei, Mahmood; Chipara, Mircea

2017-11-01

The ;International Conference on Surfaces, Coatings and Nano-Structured Materials; (NANOSMAT) has rapidly emerged as the premier conference in the field of materials science, engineering, technology and all aspects of ;nano;. Since 2005, it has been very successfully organised in several European countries, including Portugal, Spain, Italy, France, Poland, Czech Republic, Ireland, United Kingdom and also in USA, and in Asia, including Turkey and China.

Proceedings of the NASA Conference on Materials for Improved Fire Safety

NASA Technical Reports Server (NTRS)

1970-01-01

The Manned Spacecraft Center was pleased to host the NASA Conference on Materials for Improved Fire Safety which was held on May 6 and 7, 1970. This document is a compilation of papers presented at the conference and represents the culmination of several years of effort by NASA and industry which was directed toward the common objective of minimizing the fire hazard in manned spacecraft and in some other related areas. One of the more serious problem areas in the Apollo program was the flammability of nonmetallic materials. The effective and timely solution of this problem area resulted from much of the effort reported herein and contributed greatly toward the successful achievement of landing men on the moon and returning them safely to earth.

PREFACE: Preface

NASA Astrophysics Data System (ADS)

Takahashi, Masahiko; Ueda, Kiyoshi

2011-03-01

The 17th edition of the International Conference on Many Particle Spectroscopy of Atoms, Molecules, Clusters, and Surfaces (MPS) was held in Sendai, Japan, from September 4-7, 2010. It was the first time that a meeting of this series of biennial conferences was hosted in a non-European country. The conference was attended by 110 researchers (90 regular participants and 20 students) from 15 different countries around the world. The themes that the conference covered can be divided into three broad areas: lepton impact, photon impact and heavy-particle impact. A total of 43 oral presentations - including 2 plenary talks, 29 progress reports and 12 hot topics - and 87 poster presentations were held during the course of the program. Rapid progress both in experimental and theoretical techniques has led to discussions across a broad range of currently hot topics, such as many-body dynamics and electron correlation effects in excitation processes, as well as in single and multiple ionization processes for various kinds of targets including atoms, molecules, clusters, solid state and even biological systems. A snapshot of the present status of many particle spectroscopy is given in this proceedings. The chairs of the conference gratefully acknowledge the financial support from the Morino Foundation for Molecular Science, Iwatani Naoji Foundation, Sendai Tourism and Convention Bureau, and Intelligent Cosmos Academic Foundation. They are indebted to the Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, for co-hosting the conference, as well as to the international advisory board members for their extremely helpful suggestions to make the program attractive. The united effort of the local organizing committee, involving N Watanabe (Secretary), M Okunishi (Treasurer), H Fukuzawa, M Yamazaki, Y Kino, and N Kishimoto, is also gratefully acknowledged. Without the help of these institutions and individuals it would have been impossible to organize the conference. Finally, the chairs would like to express their thanks to all the participants for contributing to lively and fruitful discussions throughout the conference. Masahiko Takahashi and Kiyoshi Ueda International Advisory Board Lorenzo Avaldi (Italy)Klaus Bartschat (USA) Azzedine Lahmam-Bennani (France)Jamal Berakdar (Germany) Nora Berrah (USA)Igor Bray (Australia) XiangJun Chen (China)Claude Dal Cappello (France) Reinhard Dörner (Germany)Alexander Dorn (Germany) Danielle Dowek (France)Alexey Grum-Grzhimailo (Russia) Noriyuki Kouchi (Japan)Birgit Lohmann (Australia) Don Madison (USA)Fernando Martin (Spain) Andrew Murray (England)Bernard Piraux (Belgium) Roberto Rivarola (Argentina)Emma Sokell (Ireland) Giovanni Stefani (Italy) Conference photograph

International Conference on Superplasticity and Superplastic Forming

DTIC Science & Technology

1988-08-09

aluminides and other intermetallic compounds, as well as certain metal matrix composites. The applications of SPF parts continues to increase both in...aerospace and non-aerospace areas. Titanium continues to be the primary material processed for aerospace, although the development in Al SPF is accelerating...Electrical Technology of SCMI Superplastic Forming of Ti-Alloy Turbine Blade Paper 28 WANG CHENG and LUO YING-SHE, Xiangtan University Nc~’ Advance

Microbeam Investigations of Presolar and Early Solar System Materials

NASA Technical Reports Server (NTRS)

Huss, Gary R.

2005-01-01

This grant provided three years of funding for my Cosmochemistry research program at Arizona State University. This research resulted in 11 peer-reviewed papers in six Journals and 35 abstracts to 11 Conferences and Workshops (see list below). My original proposal listed three main areas of research: 1) Studies of presolar grains; 2) Studies of short-lived radionuclides and; 3) Investigations of nebular processes and the origin of chondritic components.

Research on Materials for High Power Laser Windows

DTIC Science & Technology

1975-12-01

1974), " Properties of Hot Forged RbCl-KCl Alloys of Low Rubidium Concentrations", Proceedings of the Fourth Annual Conference on Infrared Laser...Sabharwal et al . The grain boundaries in the samples may have been preferentially contaminated during the processing .20 Grain boundary diffusion... deposit account with NTIS is required before this service can be initiated. If you have specific questions concerning this serv- ice, please call

Abstracts and research accomplishments of university coal research projects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-06-01

The Principal Investigators of the grants supported by the University Coal Research Program were requested to submit abstracts and highlight accomplishments of their projects in time for distribution at a grantees conference. This book is a compilation of the material received in response to the request. Abstracts discuss the following area: coal science, coal surface science, reaction chemistry, advanced process concepts, engineering fundamentals and thermodynamics, environmental science.

Comments by the Chairman

NASA Astrophysics Data System (ADS)

Fouillat, Pascal

2013-08-01

The European Conference on Radiation and its Effects on Components and Systems (RADECS 2012) was held on September 24-28, 2012, in Biarritz, France. The latest advances in the field of radiation effects on electronic and photonic materials, devices, circuits, sensors, and systems, were presented and discussed. The conference featured a Technical Program, an Industrial Exhibit, and one day meeting on radiation ground effects held on September 24 (RADGROUND). The conference gathered 390 attendees, scientists and engineers from 26 countries, with a high participation of France (101), USA (80), Russia (50), Spain (28), Germany (28), and U.K. (25). Raoul Velazco, from TIMA Labs, was in charge of the Technical Program, assisted by a Technical Program Committee listed below and a pool ofmore than 150 reviewers which contributed maintain the high level of quality reached since many years by the RADECS conferences. The total number of contributions reached 201 and each paper received at least four reviews. There were 145 papers accepted and presented in the Oral Sessions (48), Poster Sessions (69), and Data Workshop (28). The scope of the conference encompassed technological processes and design techniques for producing radiation tolerant systems for space, aeronautical or terrestrial applications, as well as relevant methodologies for their characterization and qualification. The Conference Record, gathering all the papers compliant with IEEE quality standards and editorial rules, is available through the IEEE Xplore Digital Library. The paper candidates and selected for publication in the IEEE TRANSACTIONS ON NUCLEAR SCIENCE will be published in this special issue.

Proceedings of the sixth annual conference on fossil energy materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, N.C.; Judkins, R.R.

1992-07-01

The Sixth Annual Conference on Fossil Energy Materials was held in Oak Ridge, Tennessee, on May 12--14, 1992. The meeting was sponsored by the US Department of Energy's Office of Fossil Energy through the Advanced Research and Technology Development (AR TD) Materials Program, and ASM International. The objective of the AR TD Materials Program is to conduct research and development on materials for longer-term fossil energy applications as well as for generic needs of various fossil fuel technologies. The management of the Program has been decentralized to the DOE Field Office, Oak Ridge with Oak Ridge National Laboratory (ORNL) asmore » the technical support contractor. The research is performed by staff members at ORNL and by a substantial number of researchers at other national laboratories, universities, and in private industry. The work is divided into the following categories: (1) ceramics, (2) development and corrosion resistance of iron aluminide, advanced austenitic and chromium-niobium alloys, and (3) technology assessment and technology transfer. This conference is held each year to review the work on all of the projects of the Program. The agenda for the meeting is given in Appendix A, and a list of attendees is presented in Appendix B. ASM International cosponsored the conference, for which we are especially grateful.« less

Guest Editorial

NASA Astrophysics Data System (ADS)

Alagarsamy, Perumal; Srinivasan, Ananthakrishnan; Pandian, Subramanian

2014-09-01

Magnetic materials play a vital role in technologies ranging from those concerning the day-to-day life of man to special applications in nuclear, space, defense and health sectors. Despite several notable developments in theoretical and experimental fronts in the area of magnetism and magnetic materials and the ever increasing number of researchers and engineers actively engaged in these topics, only a few international conferences are being organized in these topics in Asia. To address this lacuna, the second edition of International Conference on Magnetic Materials and Applications - 2013 (MagMA-2013) was jointly hosted and organized by Indian Institute of Technology Guwahati (IITG) under the auspicious of Magnetics Society of India (MSI). MagMA-2013 devoted special sessions for (A) Soft and Hard Magnetic Materials and their Applications, (B) Magnetic Thin Films, Particles and Nanostructures, (C) Magnetic Recording, Memories, and Spintronics, (D) Strongly Correlated Electron System, (E) Fundamental Magnetic Properties and Cooperative Phenomena, (F) Novel Magnetic Materials and Device Applications, (G) Magnet Industry - Product and Marketing and (H) Interdisciplinary Topics in Magnetism. These sessions included plenary and invited talks by speakers drawn from the international arena who shared their expertise and experiences on recent developments in various topics such as (1) conventional (bulk and powder metallurgy processed) soft and hard magnetic materials, (2) novel forms (nanostructured, particulate/granular, composite, thin film and multilayered films) of soft and hard magnetic materials and their hybrids, (3) sensors and actuators based on magnetoresistive, magnetostrictive, magnetoelastic and magnetoimpedance materials, (4) magnetic storage and its trends, (5) multi-disciplinary area of bio-magnetism and applications of magnetic materials in medicine, (6) newly emerging interdisciplinary topics in magnetism and (7) recent progress in theoretical and computational techniques in magnetism.

Chemistry of electronic ceramic materials. Proceedings of the International Conference on the Chemistry of Electronic Ceramic Materials

NASA Technical Reports Server (NTRS)

Davies, P. K.; Roth, R. S.

1991-01-01

The conference was held at Jackson Hole, Wyoming from August 17 to 22, 1990, and in an attempt to maximize the development of this rapidly moving, multidisciplinary field, this conference brought together major national and international researchers to bridge the gap between those primarily interested in the pure chemistry of inorganic solids and those interested in the physical and electronic properties of ceramics. With the many major discoveries that have occurred over the last decade, one of the goals of this meeting was to evaluate the current understanding of the chemistry of electronic ceramic materials, and to assess the state of a field that has become one of the most important areas of advanced materials research. The topics covered include: crystal chemistry; dielectric ceramics; low temperature synthesis and characterization; solid state synthesis and characterization; surface chemistry; superconductors; theory and modeling.

Advanced hole patterning technology using soft spacer materials (Conference Presentation)

NASA Astrophysics Data System (ADS)

Park, Jong Keun; Hustad, Phillip D.; Aqad, Emad; Valeri, David; Wagner, Mike D.; Li, Mingqi

2017-03-01

A continuing goal in integrated circuit industry is to increase density of features within patterned masks. One pathway being used by the device manufacturers for patterning beyond the 80nm pitch limitation of 193 immersion lithography is the self-aligned spacer double patterning (SADP). Two orthogonal line space patterns with subsequent SADP can be used for contact holes multiplication. However, a combination of two immersion exposures, two spacer deposition processes, and two etch processes to reach the desired dimensions makes this process expensive and complicated. One alternative technique for contact hole multiplication is the use of an array of pillar patterns. Pillars, imaged with 193 immersion photolithography, can be uniformly deposited with spacer materials until a hole is formed in the center of 4 pillars. Selective removal of the pillar core gives a reversal of phases, a contact hole where there was once a pillar. However, the highly conformal nature of conventional spacer materials causes a problem with this application. The new holes, formed between 4 pillars, by this method have a tendency to be imperfect and not circular. To improve the contact hole circularity, this paper presents the use of both conventional spacer material and soft spacer materials. Application of soft spacer materials can be achieved by an existing coating track without additional cost burden to the device manufacturers.

Total Quality Management in Academic Libraries: Initial Implementation Efforts. Proceedings from the International Conference on TQM and Academic Libraries (1st, Washington, D.C., April 20-22, 1994).

ERIC Educational Resources Information Center

Rounds, Laura, Ed.; Matthews, Michael, Ed.

This document contains conference papers, other speeches, and supplementary material from the first International Conference on Total Quality Management (TQM) and Academic Libraries, held in 1994. The conference was comprised of four sessions, and the introductory remarks of each are included, along with transcriptions of each session's…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Gary E.; Sutherland, G. Bruce

The 2008 Columbia River Estuary Conference was held at the Liberty Theater in Astoria, Oregon, on April 19-20. The conference theme was ecosystem restoration. The purpose of the conference was to exchange data and information among researchers, policy-makers, and the public, i.e., interrelate science with management. Conference organizers invited presentations synthesizing material on Restoration Planning and Implementation (Session 1), Research to Reduce Restoration Uncertainties (Session 2), Wetlands and Flood Management (Session 3), Action Effectiveness Monitoring (Session 4), and Management Perspectives (Session 5). A series of three plenary talks opened the conference. Facilitated speaker and audience discussion periods were held atmore » the end of each session. Contributed posters conveyed additional data and information. These proceedings include abstracts and notes documenting questions from the audience and clarifying answers from the presenter for each talk. The proceedings also document key points from the discussion periods at the end of each session. The conference program is outlined in the agenda section. Speaker biographies are presented in Appendix A. Poster titles and authors are listed in Appendix B. A list of conference attendees is contained in Appendix C. A compact disk, attached to the back cover, contains material in hypertext-markup-language from the conference website (http://cerc.labworks.org/) and the individual presentations.« less

PREFACE: 11th International Conference on Damage Assessment of Structures (DAMAS 2015)

NASA Astrophysics Data System (ADS)

Wahab, M. A.

2015-07-01

This volume contains the proceedings of the 11th International Conference on Damage Assessment of Structures (DAMAS) 2015. DAMAS has a long history of almost 20 years. The first DAMAS conference took place in 1995 (Pescara, Italy), followed by a biannual meeting in 1997 (Sheffield, UK), 1999 (Dublin, Ireland), 2001 (Cardiff, UK), 2003 (Southampton, UK), 2005 (Gdansk, Poland), 2007 (Torino, Italy), 2009 (Beijing, China), 2011 (Oxford, UK) and 2013 (Dublin, Ireland). The eleventh edition of DAMAS conference series, DAMAS 2015, is hosted by Ghent University, Belgium, and is held at the congress center Het Pand in Ghent city. Ghent is the capital and the largest city of the East Flanders province of the Flemish region of Belgium. Het Pand is the culture and congress center of Ghent University and is a historical monument. The conference is established as a major international forum for research topics relevant to damage assessment of engineering structures and systems including numerical simulations, signal processing of sensor measurements and theoretical techniques as well as experimental case studies. The presentations of DAMAS 2015 are divided into 6 main sessions, namely 1) Structural Health and Condition Monitoring, 2) Damage in Civil Engineering, 3) Damage in Machineries, 4) Damage in Composite Materials, 5) Sensing and Sensors and 6) Signal Processing. The organising committee is grateful to keynote speakers; Professor Guido De Roeck, Head of Structural Mechanics Division, KULeuven, Belgium, for his keynote lecture entitled 'Structural Health Monitoring: highlights and challenges', Professor Weidong Zhu, Department of Mechanical Engineering, University of Maryland, USA, for his keynote lecture entitled 'Vibration-based Structural Damage Detection: Theory and Applications' and Professor Wieslaw Ostachowicz, Head of the Laboratory of Active Materials and Smart Structures, Polish Academy of Sciences, Poland, for his keynote lecture entitled 'Damage Assessment and Reliability in Offshore Wind Turbines Technology'. Special thanks go to members of the Scientific Committee of DAMAS 2015 for reviewing the articles published in this volume and for judging their scientific merits. Based on the comments of reviewers and the scientific merits of the submitted manuscripts, the articles were accepted for publication in the conference proceedings and for presentation at the conference venue. The accepted papers are of a very high scientific quality and contribute to advancement of knowledge in all research topics relevant to DAMAS conference. The organising committee would like to thank prestigious research groups, who made a great contribution to DAMAS 2015: the group of Professor Lars Damkilde, Aalborg University, Denmark; the group of professor Gilbert-Rainer Gillich, Eftimie Murgu University of resita, Romania, the group of Professor Wieslaw Ostachowicz, Polish Academy of Sciences, Poland and the group of Dr Vikram Pakrashi, University College Cork, Ireland. Special thanks go to Dr Vikram Pakrashi for organizing the mini-symposium 'Damage Detection, System Identification and Health Monitoring for Offshore Wind and Wave Energy Devices'. Finally, the organising committee would like to thank all authors, who have contributed to this volume and presented their research work at DAMAS 2015.

Teaching about Asia at the Secondary Level. Report of the Fifteenth Yale Conference on the Teaching of Social Studies.

ERIC Educational Resources Information Center

Bartlett, Beatrice S., Ed.; And Others

This conference booklet seeks to assist high school teachers who teach about Asia. Emphasis is upon providing a bibliography, with course outlines and background materials also offered. Four hundred annotated citations focusing on book, periodical, and other resource materials, published within the last decade, are provided for teachers working…

Composites Materials and Manufacturing Technologies for Space Applications

NASA Technical Reports Server (NTRS)

Vickers, J. H.; Tate, L. C.; Gaddis, S. W.; Neal, R. E.

2016-01-01

Composite materials offer significant advantages in space applications. Weight reduction is imperative for deep space systems. However, the pathway to deployment of composites alternatives is problematic. Improvements in the materials and processes are needed, and extensive testing is required to validate the performance, qualify the materials and processes, and certify components. Addressing these challenges could lead to the confident adoption of composites in space applications and provide spin-off technical capabilities for the aerospace and other industries. To address the issues associated with composites applications in space systems, NASA sponsored a Technical Interchange Meeting (TIM) entitled, "Composites Materials and Manufacturing Technologies for Space Applications," the proceedings of which are summarized in this Conference Publication. The NASA Space Technology Mission Directorate and the Game Changing Program chartered the meeting. The meeting was hosted by the National Center for Advanced Manufacturing (NCAM)-a public/private partnership between NASA, the State of Louisiana, Louisiana State University, industry, and academia, in association with the American Composites Manufacturers Association. The Louisiana Center for Manufacturing Sciences served as the coordinator for the TIM.

Effect of Service Environment on Composite Materials

DTIC Science & Technology

1980-08-01

AGARC -CP-288 . z AGARD Conference Procee•dings No.288 Effect of Service Environment on Composite Materials M1TflIBInj4 STATE 9s~k 7- II LLU...ORGANISATION DU TRAITE DE L’ATLANTI )UE NOR3) AGARD Conference Proceedings 1, o.288 EFFECT OF SERVICE ENVIRONM ENT ONj I COMPOSITE MATERIALS --- I... composites soumis aux divers types d’agressions que l’on recouvre aujourd’hui du vocable d’...environnement". On doit admettre que cette revue 6tait part

PREFACE: 12th Russia/CIS/Baltic/Japan Symposium on Ferroelectricity and 9th International Conference on Functional Materials and Nanotechnologies (RCBJSF-2014-FM&NT)

NASA Astrophysics Data System (ADS)

Sternberg, Andris; Grinberga, Liga; Sarakovskis, Anatolijs; Rutkis, Martins

2015-03-01

The joint International Symposium RCBJSF-2014-FM&NT successfully has united two international events - 12th Russia/CIS/Baltic/Japan Symposium on Ferroelectricity (RCBJSF-12) and 9th International Conference Functional Materials and Nanotechnologies (FM&NT-2014). The RCBJSF symposium is a continuation of series of meetings on ferroelectricity, the first of which took place in Novosibirsk (USSR) in 1976. FM&NT conferences started in 2006 and have been organized by Institute of Solid State Physics, University of Latvia in Riga. In 2012 the International program committee decided to transform this conference into a traveling Baltic State conference and the FM&NT-2013 was organized by the Institute of Physics, University of Tartu, Estonia. In 2014 the joint international symposium RCBJSF-2014-FM&NT was organized by the Institute of Solid State Physics, University of Latvia and was part of Riga - 2014, the European Capital of Culture event. The purpose of the joint Symposium was to bring together scientists, students and high-level experts in solid state physics, materials science, engineering and related disciplines. The number of the registered participants from 26 countries was over 350. During the Symposium 128 high quality scientific talks (5 plenary, 42 invited, 81 oral) and over 215 posters were presented. All presentations were divided into 4 parallel sessions according to 4 main topics of the Symposium: Ferroelectricity, including ferroelectrics and multiferroics, pyroelectrics, piezoelectrics and actuators, integrated ferroelectrics, relaxors, phase transitions and critical phenomena. Multifunctional Materials, including theory, multiscale and multiphenomenal material modeling and simulation, advanced inorganic, organic and hybrid materials. Nanotechnologies, including progressive methods, technologies and design for production, investigation of nano- particles, composites, structures, thin films and coatings. Energy, including perspective materials and technologies for renewable and hydrogen energy, fuel cells, photovoltaics, LEDs, OLEDs. Based on these reports, 48 papers are included in this volume of IOP Conference Series: Materials Science and Engineering. Additional information about RCBJSF-2014-FM&NT is available at the homepage http://www.fmnt.lu.lv. The Organizing Committee would like to thank all the speakers, contributors, session chairs, referees and other involved staff for their efforts in making the RCBJSF-2014-FM&NT successful. Sincerely, organizers of the event Andris Sternberg Liga Grinberga Anatolijs Sarakovskis Martins Rutkis

Low-cost solar array progress and plans

NASA Astrophysics Data System (ADS)

Callaghan, W. T.

It is pointed out that significant redirection has occurred in the U.S. Department of Energy (DOE) Photovoltaics Program, and thus in the Flat-Plate Solar Array Project (FSA), since the 3rd European Communities Conference. The Silicon Materials Task has now the objective to sponsor theoretical and experimental research on silicon material refinement technology suitable for photovoltaic flat-plate solar arrays. With respect to the hydrochlorination reaction, a process proof of concept was completed through definition of reaction kinetics, catalyst, and reaction characteristics. In connection with the dichlorosilane chemical vapor desposition process, a preliminary design was completed of an experimental process system development unit with a capacity of 100 to 200 MT/yr of Si.Attention is also given to the silicon-sheet formation research area, environmental isolation research, the cell and module formation task, the engineering sciences area, and the module performance and failure analysis area.

View from the center: Supercities conference

NASA Astrophysics Data System (ADS)

Knox, J. B.

The Supercities Conference (26-30 October 1992) was the initial activity planned and executed by the Pacific Basin Study Center (PBSC), a research center founded by San Francisco State University and the University of California, Davis. The Conference focused on issues of environmental quality and the quest for sustainable development in the great urban centers—Supercities—of the Pacific. The Conference, with its working group process, highlighted the long-term commitment of the PBSC to education, training, and research in regard to environmental, energy, and resource utilization issues that challenge society now and the coming century. We define a "Supercity" as a large metropolitan area of about eight million population currently undergoing rapid growth in population and urbanization. Some of the cities considered at the conference are emerging "Supercities"—large urban complexes destined to soon be "Supercities". Supercities in both the developing and developed nations are at critical stages of development, with the size and number of Supercities appearing to be unstoppable. These urban centers and their surrounding areas are large users of resources and energy. In many cases, the national demand for energy and materials will be largely patterned by the strategies, management, and actions taken within the Supercities. It is for this reason that our focus is on these dynamic, urban entities of the Pacific. Appropriate technology transfer, sharing of common concerns and knowledge, and the seeking of workable conservation and remediation efforts within Supercities could improve living conditions within these centers, and address regional and global environmental issues in parallel. The Conference focused on urban air quality conditions in 14 metropolitan areas, common health impacts, and projected emissions; a working group process defined needed areas for research and development of key information. Through the medium of panels, the progress of several major cities in addressing urban air quality issues was reported, as well as the rationale for the documented successes of environmental improvement. The Conference played a key role in the definition of the early research directions of the PBSC, and in the establishment of a Pacific Basin network of researchers and planners committed to the pursuit of sustainable development.

Joining Vocational Education and the Community. Maryland Vocational Administrators' Conferences Spring and Fall 1984.

ERIC Educational Resources Information Center

Gilli, Angelo C., Sr., Ed.

Materials are provided from the spring and fall Maryland Vocational Administrators' Conferences. Part I: Spring 1984 begins with Addison S. Hobbs' brief welcome and the conference agenda. "Linkage Projects between LEAs (local education agencies), Two-Year Colleges, and Senior Colleges" (Lynn M. Gilli, recorder) summarizes resource…

Preface: Proceedings of the 4th European Conference on Neutron Scattering (Lund, Sweden, 25 29 June 2007)

NASA Astrophysics Data System (ADS)

Rennie, Adrian R.

2008-03-01

Approximately 700 delegates came to the small university city of Lund in southern Sweden at the end of June 2007 to attend the 4th European Conference on Neutron Scattering. The majority of these participants are primarily interested in specific areas of condensed matter science and use neutron techniques as a powerful tool to study the structure and dynamic behaviour of materials. These range from liquids, superconductors, magnetic materials and archaeological artefacts. The diversity of scientific problems is reflected by the attendance of many laboratories with specializations in numerous different disciplines. The maturity of the technique is shown by the fact that neutron scattering is now applied widely in so many areas. Most results from neutron scattering experiements are published as articles that primarily relate to a specific scientific discipline in the context of problem oriented research. The neutron scattering conference provided an opportunity to exchange ideas between different fields. It is hoped that this collection of papers, from participants that submitted articles on applications of neutron scattering, will continue to promote the exchange of ideas for new studies, as was seen at the conference. The papers that describe instrumentation and advances in methods of neutron scattering will appear separately in Measurement Science and Technology Worldwide activity in developing new facilities for neutron scattering and the motivation for substantial projects, such as the new target station at the ISIS facility in the UK or the proposed European Spallation Source, comes from unique information obtained from working with neutrons. The results reported in the following papers show that there is substantial exciting work still to be performed as the community of users expands into new fields. The participants, as well as the organizers, are extremely grateful to the numerous sponsors that helped to make the conference a resounding success. We are grateful to IOP Publishing for agreeing to publish these papers, and for their friendly service, and prompt and efficient organization of the refereeing and editorial process.

2010 MARINE MICROBES GORDON RESEARCH CONFERENCE (JULY 4-9, 2010 - TILTON SCHOOL, TILTON NH)

DOE Office of Scientific and Technical Information (OSTI.GOV)

David Kirchman

Marine microbes include representatives from all three kingdoms of life and collectively carry out virtually all forms of metabolisms found on the planet. Because of this metabolic and genetic diversity, these microbes mediate many of the reactions making up global biogeochemical cycles which govern the flow of energy and material in the biosphere. The goal of this conference is to bring together approaches and concepts from studies of microbial evolution, genomics, ecology, and oceanography in order to gain new insights into marine microbes and their biogeochemical functions. The integration of scales, from genes to global cycles, will result in amore » better understanding of marine microbes and of their contribution to the carbon cycle and other biogeochemical processes.« less

Antimicrobial Treatment of Polymeric Medical Devices by Silver Nanomaterials and Related Technology.

PubMed

Polívková, Markéta; Hubáček, Tomáš; Staszek, Marek; Švorčík, Václav; Siegel, Jakub

2017-02-15

Antimicrobial biocompatible polymers form a group of highly desirable materials in medicinal technology that exhibit interesting thermal and mechanical properties, and high chemical resistance. There are numerous types of polymers with antimicrobial activity or antimicrobial properties conferred through their proper modification. In this review, we focus on the second type of polymers, especially those whose antimicrobial activity is conferred by nanotechnology. Nanotechnology processing is a developing area that exploits the antibacterial effects of broad-scale compounds, both organic and inorganic, to form value-added medical devices. This work gives an overview of nanostructured antimicrobial agents, especially silver ones, used together with biocompatible polymers as effective antimicrobial composites in healthcare. The bactericidal properties of non-conventional antimicrobial agents are compared with those of conventional ones and the advantages and disadvantages are discussed.

PREFACE: 1st International Conference on Mechanical Engineering Research 2011 (ICMER2011)

NASA Astrophysics Data System (ADS)

Abu Bakar, Rosli

2012-09-01

The year 2010 represented a significant milestone in the history of the Mechanical Engineering community with the organization of the first and second national level conferences (National Conference in Mechanical Engineering for Research, 1st and 2nd NCMER) at Universiti Malaysia Pahang on 26-27 May and 3-4 December 2010. The conferences attracted a large number of delegates from different premier academic and research institutions in the country to participate and share their research experiences at the conference. The International Conference on Mechanical Engineering Research (ICMER 2011) followed on from the first and second conferences due to good support from researchers. The ICMER 2011 is a good platform for researchers and postgraduate students to present their latest finding in research. The conference covers a wide range of topics including the internal combustion engine, machining processes, heat and mass transfer, fuel, biomechanical analysis, aerodynamic analysis, thermal comfort, computational techniques, design and simulation, automotive transmission, optimization techniques, hybrid electric vehicles, engine vibration, heat exchangers, finite element analysis, computational fluid dynamics, green energy, vehicle dynamics renewable energy, combustion, design, product development, advanced experimentation techniques, to name but a few. The international conference has helped to bridge the gap between researchers working at different institutions and in different countries to share their knowledge and has helped to motivate young scientists with their research. This has also given some clear direction for further research from the deliberations of the conference. Several people have contributed in different ways to the success of the conference. We thank the keynote speakers and all authors of the contributed papers, for the cooperation rendered to us in the publication of the CD conference proceedings. In particular, we would like to place on record our thanks to the expert reviewers who have spared their time reviewing the papers. We also highly appreciate the assistance offered by many volunteers in the preparation of the conference proceedings. All papers in ICMER 2011 have the opportunity to be published in IOP Conference Series: Materials Science and Engineering, (indexed by Scopus, Ei Compendex, Inspec), International Journal of Automotive and Mechanical Engineering (IJAME) and Journal of Mechanical Engineering and Sciences (JMES). Professor Dr Hj Rosli Abu Bakar Chairman ICMER 2011

Tunable high-refractive index hybrid for solution-processed light management devices (Conference Presentation)

NASA Astrophysics Data System (ADS)

Bachevillier, Stefan

2016-10-01

After the use of highly efficient but expensive inorganic optical materials, solution-processable polymers and hybrids have drawn more and more interest. Our group have recently developed a novel polymer-based hybrid optical material from titanium oxide hydrate exhibiting an outstanding set of optical and material properties. Firstly, their low cost, processability and cross-linked states are particularly attractive for many applications. Moreover, a high refractive index can be repeatedly achieved while optical losses stays considerably low over the entire visible and near-infrared wavelength regime. Indeed, the formation of inorganic nanoparticles, usually present in nanocomposites, is avoided by a specific formulation process. Even more remarkably, the refractive index can be tuned by either changing the inorganic content, using different titanium precursors or via a low-temperature curing process. A part of our work is focused on the reliable optical characterization of these properties, in particular a microscope-based setup allowing in-situ measurement and sample mapping has been developed. Our efforts are also concentrated on various applications of these exceptional properties. This hybrid material is tailored for photonic devices, with a specific emphasis on the production of highly efficient solution processable Distributed Bragg Reflectors (DBR) and anti-reflection coatings. Furthermore, waveguides can be fabricated from thin films along with in-coupling and out-coupling structures. These light managements structures are particularly adapted to organic photovoltaic cells (OPVs) and light emitting diodes (OLEDs).

MOTHER AND INFANT CARE, PRACTICAL NURSE TRAINING PROGRAM, LESSON PLANS, PREPARED BY PRACTICAL NURSING INSTRUCTORS DURING CONFERENCE (UNIVERSITY OF TENNESSEE, AUGUST 14-18, 1961).

ERIC Educational Resources Information Center

Tennessee State Board for Vocational Education, Murfreesboro. Vocational Curriculum Lab.

PRACTICAL NURSE INSTRUCTORS, IN CONFERENCE, COMPILED THIS INDIVIDUALLY PLANNED AND TESTED MATERIAL TO BE USED IN PRACTICAL NURSE EDUCATION. THIRTY-TWO LESSON PLANS ON THE SUBJECT OF MOTHER AND INFANT CARE COVER TOPICS RANGING FROM THE REPRODUCTIVE SYSTEM TO COMPLICATIONS INVOLVING THE NEWBORN. EACH PLAN INCLUDES AIM, REFERENCES, MATERIALS,…

PREFACE: International Conference on Fundamentals and Applications of HIPIMS

NASA Astrophysics Data System (ADS)

Ehiasarian, Arutiun; Bandorf, Ralf

2012-09-01

Thin film technology and surface engineering are nowadays key components for numerous innovative products like efficient windows, flat screens, sensors or hard coatings used in tool coating and automotive applications, as well as products for everyday life. In line with the demands of surface technology, coating technology is also evolving and improving. The latest major technology jump was the introduction of pulse technology in physical vapor deposition. High power impulse magnetron sputtering is the most recent development of pulse sputtering. After approximately a decade of intense academic investigation and development we observe today a transfer of this new technology towards industrial processes. As well as several international activities the international conference on fundamentals and applications of HIPIMS continues the success story of the HIPIMS days, initiated in 2004 at Sheffield Hallam University, UK. Becoming the only international conference especially dedicated to HIPIMS the HIPIMS conference is a venue for industrial and academic exchange on the latest developments in this fast evolving new technology. As a joint undertaking of Sheffield Hallam University SHU, Network of Competence for Industrial Plasma Surface Technology INPLAS and Fraunhofer Institute for Surface Engineering and Thin Films IST the HIPIMS conference was launched in 2010 in Sheffield, UK. With 120 delegates the impact of the new conference was underlined. The growing importance of HIPIMS technology was connected with a growth by nearly 35% to 160 participants in 2011 at the second HIPIMS conference in Braunschweig, DE. The participants were made up of equal numbers from research and development (university and research institutes) and industry. Being a global conference representatives from 25 different countries from all continents attended. The HIPIMS conference is also in joint collaboration with the COST Action MP0804 Highly Ionized Pulse Plasma Processes (www.hipp-cost.eu). COST (European Cooperation in Science and Technology) is one of the longest-running European frameworks supporting cooperation among scientists and researchers across Europe (www.cost.eu). The COST Action MP0804 HIPP processes focuses on the fundamentals and the industrial implementation of highly ionized pulse plasmas, where HIPIMS is the most prominent and most mature technology, today. Over 50 high level contributions, divided in 37 oral and 14 poster presentations were highly appreciated by the professional audience. The message from 2011 was that HIPIMS technology has now reached industry. In the opening session of the conference representatives from different companies reported on the latest developments in industrialization. Using HIPIMS technology, the lifetime of mills using a state of the art coating can be extended by 50%. Comparable deposition rates for coating cutting inserts on the different faces are reported. The ice-free window for automotive application is one solution just becoming available by HIPIMS technology. The talks from international experts covered a range from fundamental physics, experimental investigations, theoretically modeling to several applications and made the international conference on fundamentals and applications a success story to be continued in the following years. Arutiun Ehiasarian and Ralf Bandorf (Conference Chairmen of HIPIMS 2010 and 2011, respectively) Organising Committee (2010 and 2011) - Affiliations Professor Dr Papken Hovsepian (Sheffield Hallam University, Nanotechnology Center for PVD Research, UK) Professor Dr Günter Bräuer (Fraunhofer Institute for Surface Engineering and Thin Films IST/ Network of Competence INPLAS, Braunschweig, DE) Professor Dr Arutiun P. Ehiasarian (Sheffield Hallam University, Materials Research Institute, UK) Dr Ralf Bandorf (Fraunhofer Institute for Surface Engineering and Thin Films IST, Braunschweig, DE) Main Sponsor Society of Vacuum Coaters SVC Albuquerque, New Mexico, USA Sponsors Ionbond Netherlands BV Venlo, NL Hauzer Techno Coating BV Venlo, NL Hüttinger Elektronik GmbH + Co. KG Freiburg, DE Conference Photos Conference photograph Attendees HIPIMS Conference 2010, Sheffield, UK Conference photograph Attendees HIPIMS Conference 2011, Braunschweig, Germany

Proceedings of the sixth annual conference on fossil energy materials. Fossil Energy AR and TD Mateials Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, N.C.; Judkins, R.R.

1992-07-01

The Sixth Annual Conference on Fossil Energy Materials was held in Oak Ridge, Tennessee, on May 12--14, 1992. The meeting was sponsored by the US Department of Energy`s Office of Fossil Energy through the Advanced Research and Technology Development (AR&TD) Materials Program, and ASM International. The objective of the AR&TD Materials Program is to conduct research and development on materials for longer-term fossil energy applications as well as for generic needs of various fossil fuel technologies. The management of the Program has been decentralized to the DOE Field Office, Oak Ridge with Oak Ridge National Laboratory (ORNL) as the technicalmore » support contractor. The research is performed by staff members at ORNL and by a substantial number of researchers at other national laboratories, universities, and in private industry. The work is divided into the following categories: (1) ceramics, (2) development and corrosion resistance of iron aluminide, advanced austenitic and chromium-niobium alloys, and (3) technology assessment and technology transfer. This conference is held each year to review the work on all of the projects of the Program. The agenda for the meeting is given in Appendix A, and a list of attendees is presented in Appendix B. ASM International cosponsored the conference, for which we are especially grateful.« less

A proposal for a drug product Manufacturing Classification System (MCS) for oral solid dosage forms.

PubMed

Leane, Michael; Pitt, Kendal; Reynolds, Gavin

2015-01-01

This paper proposes the development of a drug product Manufacturing Classification System (MCS) based on processing route. It summarizes conclusions from a dedicated APS conference and subsequent discussion within APS focus groups and the MCS working party. The MCS is intended as a tool for pharmaceutical scientists to rank the feasibility of different processing routes for the manufacture of oral solid dosage forms, based on selected properties of the API and the needs of the formulation. It has many applications in pharmaceutical development, in particular, it will provide a common understanding of risk by defining what the "right particles" are, enable the selection of the best process, and aid subsequent transfer to manufacturing. The ultimate aim is one of prediction of product developability and processability based upon previous experience. This paper is intended to stimulate contribution from a broad range of stakeholders to develop the MCS concept further and apply it to practice. In particular, opinions are sought on what API properties are important when selecting or modifying materials to enable an efficient and robust pharmaceutical manufacturing process. Feedback can be given by replying to our dedicated e-mail address (mcs@apsgb.org); completing the survey on our LinkedIn site; or by attending one of our planned conference roundtable sessions.

The 2009 National Environmental Public Health Conference: one model for planning green and healthy conferences.

PubMed

Ruckart, Perri Zeitz; Moore, Cory; Burgin, Deborah; Byrne, Maggie Kelly

2011-01-01

The Centers for Disease Control and Prevention's National Center for Environmental Health and the Agency for Toxic Substances and Disease Registry committed to making their 2009 National Environmental Public Health Conference a model for green and healthy conferences. The conference included increased opportunities for physical activity, both as part of conference events and for transportation to the conference. In addition, conference meals were healthy and sustainably sourced. The conference also implemented intuitive, accessible recycling; online scheduling and evaluation to minimize hard-copy materials; and the purchase of carbon offsets to reduce the unwanted environmental impact of the conference. Public health professionals have an opportunity and obligation to support healthy behaviors at their events and to serve as leaders in this area. Facilitating healthy and sustainable choices is in alignment with goals for both public health and broader social issues-such as environmental quality-that have a direct bearing on public health.

A Working Partnership for 1993: Linking Community Colleges and Business. Conference Summary.(Sacramento, California, May 13, 1983).

ERIC Educational Resources Information Center

1983

Summaries are provided of the presentations, discussions, and major conclusions of a conference convened in May 1983 to develop mechanisms for improving the linkages between industry and community colleges in California. Introductory material offers an overview of the conference's goals, employment training in California, and the role of the…

Contemporary Elementary and Middle School Physical Education Conference (9th, Atlanta, Georgia, January 22-24, 1987).

ERIC Educational Resources Information Center

Jones, Margaret A., Ed.

The conference reported in these proceedings focused on the sharing of recent innovations, successful programming and teaching concepts, and research in children's physical education. Materials are presented in three sections, one for each day of the conference. The first day's agenda included presentations by nationally known physical educators…

Research in Action II National Conference Proceedings (Lubbock, Texas, February 9-11, 1983). Volume II.

ERIC Educational Resources Information Center

Tucker, Jamie, Ed.

This conference program includes explanatory material and reprints 15 of the 43 papers presented in conference sessions. In addition to Rheta De Vries' keynote address--"Can Research Help Teachers Teach?"--research reports are published from four interest session tracks. Papers from the health/handicap track include Patricia Hutinger's…

Advances in joining newer structural materials; Proceedings of the International Conference, Montreal, Canada, July 23-25, 1990

NASA Astrophysics Data System (ADS)

The present conference on advances in joining novel structural materials encompasses such material types as ceramics, plastics and composites, and new metallic materials. Specific issues addressed include the use of conductor electric explosion to join ceramics, the effects of brazing temperature on joint properties of SiC-fiber-reinforced Al-alloy-matrix composites, the in situ structure control of composite materials, and the weldability of polymeric materials that are heterogeneous as to chemical nature from the standpoint of morphology. Also addressed are the joining of the Al-Li alloy 8090, diffusion bonding of a creep-resistant Fe-ODS alloy, the adhesive bonding of zinc-coated steel sheets, welds in thermoplastic composite materials, and hot-melt joints for carbon-fiber-reinforced composites.

International Conference on Materials Science and Technology (ICMST 2012)

NASA Astrophysics Data System (ADS)

Joseph, Ginson P.

2015-02-01

FROM THE CONVENOR'S DESK The Department of Physics, St. Thomas College Pala, is highly privileged to organize an International Conference on Materials Science and Technology (ICMST 2012) during 10-14 June 2012, and as Convenor of the conference it is with legitimate pride and immense gratitude to God that I remember the most enthusiastic responses received for this from scientists all over the world. In a time of tremendous revolutionary changes in Materials Science and Technology, it is quite in keeping with the tradition of a pioneering institute that St. Thomas College is, to have risen to the occasion to make this conference a reality. We have no doubt that this proved to be a historic event, a real breakthrough, not only for us the organizers but also for all the participants. A conference of this kind provides a nonpareil, a distinctly outstanding platform for the scholars, researchers and the scientists to discuss and share ideas with delegates from all over the world. This had been most fruitful to the participants in identifying new collaborations and strengthening existing relations. That experts of diverse disciplines from across the world were sitting under one roof for five days, exchanging views and sharing findings, was a speciality of this conference. The event has evoked excellent responses from all segments of the Materials Science community worldwide. 600 renowned scholars from 28 countries participated in this. We were uniquely honoured to have Prof. C.N.R. Rao, Chairman, Scientific Advisory Council to the Prime Minister of India, to inaugurate this conference. May I take this opportunity to thank all those who have contributed their valuable share, diverse in tone and nature, in the making of this conference. My whole hearted gratitude is due to the international and national members of the advisory committee for their valuable guidance and involvement. I place on record my heartfelt gratitude to our sponsors. I am sure that this conference has contributed to more innovations and inventions in the field and promoted the advancement of Science and Technology in India. It is with immense pain and sorrow that I pay tribute to Prof. Antony Simon, one of the members of the organizing team, who departed from us after bestowing everything that one could for the success of ICMST 2012. I wish all the success to all who contributed papers to the conference. Dr. Ginson P. Joseph Convenor, ICMST 2012

PREFACE: 12th High-Tech Plasma Processes Conference (HTPP-12)

NASA Astrophysics Data System (ADS)

Gleizes, Alain; Ghedini, Emanuele; Gherardi, Matteo; Sanibondi, Paolo; Dilecce, Giorgio

2012-12-01

The High-Tech Plasma Processes - 12th European Plasma Conference (HTPP-12) was held in Bologna (Italy) on 24-29 June 2012. The conference series started in 1990 as a thermal plasma conference and gradually expanded to include other topic fields as well. Now the High-Tech Plasma Processes - European Plasma Conference (HTPP) is a bi-annual international conference based in Europe with topics encompassing the whole area of plasma processing science. The aim of the conference is to bring different scientific communities together, facilitate the contacts between science, technology and industry and provide a platform for the exploration of both fundamental topics and new applications of plasmas. Thanks to the efforts of the conference chairman, Professor Vittorio Colombo and of the co-chair, Professor Piero Favia, a well balanced participation from both the communities of thermal and nonthermal plasma researchers was achieved; this resulted in just about 196 attendees from 39 countries, with 8 plenary and 15 invited talks, plus 50 oral and 140 poster contributions. This volume of Journal of Physics: Conference Series gathers papers from regular contributions of HTPP-12; each contribution submitted for publication has been peer reviewed and the Editors are very grateful to the referees for their careful support in improving the original manuscripts. In the end, 39 manuscripts were accepted for publication, covering different topics of plasma processing science: from plasma fundamentals and modelling to source design and process diagnostics, from nanomaterial synthesis to surface modification, from waste treatment to plasma applications in a liquid environment. It is an honour to present this volume of Journal of Physics: Conference Series and we deeply thank the authors for their enthusiastic and high-grade contribution. Finally, we would like to thank the conference chairmen, the members of the steering committee, the international scientific committee, the local organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of HTPP-12. The Editors of the HTPP 12 Proceedings Professor Alain Gleizes (head of the ISC) Dr Emanuele Ghedini Dr Matteo Gherardi Dr Paolo Sanibondi Dr Giorgio Dilecce Bologna, 30 October 2012

Multilocation Video Conference By Optical Fiber

NASA Astrophysics Data System (ADS)

Gray, Donald J.

1982-10-01

An experimental system that permits interconnection of many offices in a single video conference is described. Video images transmitted to conference participants are selected by the conference chairman and switched by a microprocessor-controlled video switch. Speakers can, at their choice, transmit their own images or images of graphics they wish to display. Users are connected to the Switching Center by optical fiber subscriber loops that carry analog video, digitized telephone, data and signaling. The same system also provides user-selectable distribution of video program and video library material. Experience in the operation of the conference system is discussed.

Particle Image Velocimetry Using a Novel, Non-Intrusive Particle Seeding

DTIC Science & Technology

2006-05-01

Conference of Liquid Atomization and Spray Systems , Sorrento Italy, July 2003 35. Thomas P.J. “On the influence of the Basset history force on the motion...dispensed into the flow as a liquid , immediately condensing to solid seed particles as they leave the spray nozzle. The advantage of using these...process transitions the solid tracer particles to CO2 gas . The result is a self- cleaning non-hazardous seed material that can eliminate many of the

IMEC-9: The 9th Israel Materials Engineering Conference. Program & Abstracts

DTIC Science & Technology

1999-12-07

non- toxic , magnetite (FesC^) nanoparticles of very narrow size distribution in sizes ranging from approximately 20 nm up to 0.1 urn. The process for...Israel 17 Composites I Hall G Chair: R. Albalak 13:30 -13:50 Synthesis of Dense Oxide -Based In Situ Composites via Thermal Explosion/SHS...Tsionsky, Israel 16:00 -16:20 The Effect of Composition and Microstructure on the Corrosion Behavior of Magnesium- Aluminium Alloys P. Uzan, D. Eliezer

PREFACE: 6th International Workshop on Multi-Rate Processes and Hysteresis (MURPHYS2012)

NASA Astrophysics Data System (ADS)

Dimian, Mihai; Rachinskii, Dmitrii

2015-02-01

The International Workshop on Multi-Rate Processes and Hysteresis (MURPHYS) conference series focuses on multiple scale systems, singular perturbation problems, phase transitions and hysteresis phenomena occurring in physical, biological, chemical, economical, engineering and information systems. The 6th edition was hosted by Stefan cel Mare University in the city of Suceava located in the beautiful multicultural land of Bukovina, Romania, from May 21 to 24, 2012. This continued the series of biennial multidisciplinary conferences organized in Cork, Ireland from 2002 to 2008 and in Pécs, Hungary in 2010. The MURPHYS 2012 Workshop brought together more than 50 researchers in hysteresis and multi-scale phenomena from the United State of America, the United Kingdom, France, Germany, Italy, Ireland, Czech Republic, Hungary, Greece, Ukraine, and Romania. Participants shared and discussed new developments of analytical techniques and numerical methods along with a variety of their applications in various areas, including material sciences, electrical and electronics engineering, mechanical engineering and civil structures, biological and eco-systems, economics and finance. The Workshop was sponsored by the European Social Fund through Sectoral Operational Program Human Resources 2007-2013 (PRO-DOCT) and Stefan cel Mare University, Suceava. The Organizing Committee was co-chaired by Mihai Dimian from Stefan cel Mare University, Suceava (Romania), Amalia Ivanyi from the University of Pecs (Hungary), and Dmitrii Rachinskii from the University College Cork (Ireland). All papers published in this volume of Journal of Physics: Conference Series have been peer reviewed through processes administered by the Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Publishing. The Guest Editors wish to place on record their sincere gratitude to Miss Sarah Toms for the assistance she provided during the publication process. More information about the Workshop can be found at http://www.murphys.usv.ro/ Mihai Dimian and Dmitrii Rachinskii Guest Editors for Journal of Physics: Conference Series Proceedings of the 6th International Workshop on Multi-Rate Processes and Hysteresis

21st Space Simulation Conference: The Future of Space Simulation Testing in the 21st Century

NASA Technical Reports Server (NTRS)

Stecher, Joseph L., III (Compiler)

2000-01-01

The Institute of Environmental Sciences and Technology's Twenty-first Space Simulation Conference, "The Future of Space Testing in the 21st Century" provided participants with a forum to acquire and exchange information on the state-of-the-art in space simulation, test technology, atomic oxygen, programs/system testing, dynamics testing, contamination, and materials. The papers presented at this conference and the resulting discussions carried out the conference theme "The Future of Space Testing in the 21st Century."

Academy of Human Resource Development Conference Proceedings (Raleigh-Durham, North Carolina, March 8-12, 2000).

ERIC Educational Resources Information Center

Kuchinke, K. Peter, Ed.

This two-volume document contains the proceedings of the 2000 conference of the Academy of Human Resource Development (AHRD). Volume 1 contains the following materials: conference overview; text of a town forum on social responsibility and human resource development (HRD); papers from symposia 1-24; and papers from innovative sessions 1-4. The…

PREFACE: 17th International Conference on Microscopy of Semiconducting Materials 2011

NASA Astrophysics Data System (ADS)

Walther, T.; Midgley, P. A.

2011-11-01

This volume contains invited and contributed papers from the 17th international conference on 'Microscopy of Semiconducting Materials' held at Churchill College, University of Cambridge, on 4-7 April 2011. The meeting was organised under the auspices of the Institute of Physics and supported by the Royal Microscopical Society as well as the Materials Research Society of the USA. This conference series deals with recent advances in semiconductor studies carried out by all forms of microscopy, with an emphasis on electron microscopy and related techniques with high spatial resolution. This time the meeting was attended by 131 delegates from 25 countries world-wide, a record in terms of internationality. As semiconductor devices shrink further new routes of device processing and characterisation need to be developed, and, for the latter, methods that offer sub-nanometre spatial resolution are particularly valuable. The various forms of imaging, diffraction and spectroscopy available in modern microscopes are powerful tools for studying the microstructure, the electronic structure, the chemistry and also electric fields in semiconducting materials. Recent advances in instrumentation, from lens aberration correction in both TEM and STEM instruments, to the development of a wide range of scanning probe techniques, as well as new methods of signal quantification have been presented at this conference. Two examples of topics at this meeting that have attracted a number of interesting studies were: the correlation of microstructural, optical and chemical information at atomic resolution with nanometre-scale resolved maps of the local electrical fields in (In,Al)GaN based semiconductors and tomographic approaches to characterise ensembles of nanowires and stacks of processed layers in devices Figure 1 Figure 1. Opening lecture by Professor Sir Colin J Humphreys. Each manuscript submitted for publication in this proceedings volume has been independently reviewed and revised where necessary. In the end, 61 manuscripts were accepted for publication. The Editors are very grateful to the following colleagues for their rapid and careful reviewing of manuscripts: M Albrecht, J S Barnard, R Beanland, G A Botton, D Cooper, L Clement, A J Craven, A G Cullis, N Daneu, V Grillo, E Grünbaum, A Gustafsson, P-H Jouneau, O L Krivanek, D Larson, M Luysberg, S I Molina, F A Ponce, A Rosenauer, F M Ross, I M Ross, J-L Rouviere, and Z L Wang. Prizes for student presentations at the conference were awarded to Mr Alberto Eljarrat, Universitat de Barcelona, and Mr Thibaud Denneulin, CEA-LETI Grenoble, both of whom are presenting their results also as contributions to this proceedings volume. Entertainment during the conference dinner was provided by the college's string quartet, and after the meal we held the now traditional friendly competition between teams of microscopists; this year teams were asked to construct models of scientific instruments using only cardboard, paper, sticky tape and glue. By unanimous vote, the team who presented the 'Atomic Food Microscope (AFM)' prototype won first prize - the deft 'dipping mode' of the cardboard cantilever (see photo) was a highlight! Figure 2 Figure 2. The prize winning 'Atomic Food Microscope (AFM)' in action! The organisers are very grateful to the following companies who contributed to the success of the meeting by presenting trade stands during an exhibition on the evening of 5 April: Agar Scientific, Bruker, CamScan, FEI, Gatan, Hitachi High Technologies, HREM Research, IOP Publishing, JEOL, Leica Microsystems and MICOS. Finally, we would like to thank the staff of the Institute of Physics for their expert assistance in planning and organising this conference and in particular Claire Garland for her dedicated professional support and her always joyful approach to any issues that arose. October 2011 T Walther P A Midgley

Surface ablation of inorganic transparent materials using 70W femtosecond pulses at 1MHz (Conference Presentation)

NASA Astrophysics Data System (ADS)

Mishchik, Konstantin; Gaudfrin, Kevin; Audouard, Eric F.; Mottay, Eric P.; Lopez, John

2017-03-01

Nowadays processing of transparent materials, such as glass, quartz, sapphire and others, is a subject of high interest for worldwide industry since these materials are widely used for mass markets such as consumer electronics, flat display panels manufacturing, optoelectronics or watchmaking industry. The key issue is to combine high throughput, low residual stress and good processing quality in order to avoid chipping and any post-processing step such as grinding or polishing. Complimentary to non-ablative techniques used for zero-kerf glass cutting, surface ablation of such materials is interesting for engraving, grooving as well as full ablation cutting. Indeed this technique enables to process complex parts including via or blind, open or closed, straight or small radius of curvature patterns. We report on surface ablation experiments on transparent materials using a high average power (70W) and high repetition rate (1 MHz) femtosecond laser. These experiments have been done at 1030nm and 515nm on different inorganic transparent materials, such as regular and strengthened glass, borosilicate glass or sapphire, in order to underline their different ablation behavior. Despite the heat accumulation that occurs above 100 kHz we have reached a good compromise between throughput and processing quality. The effects of fluence, pulse-to-pulse overlap and number of passes are discussed in terms of etch rate, ablation efficiency, optimum fluence, maximum achievable depth, micro cracks formation and residual stresses. These experimental results will be also compared with numerical calculations obtained owing to a simple engineering model based on the two-temperature description of the ultrafast ablation.

Pilot study of the development of a theory-based instrument to evaluate the communication process during multidisciplinary team conferences in rheumatology.

PubMed

Verhoef, J; Toussaint, P J; Putter, H; Zwetsloot-Schonk, J H M; Vliet Vlieland, T P M

2005-10-01

Coordinated teams with multidisciplinary team conferences are generally seen as a solution to the management of complex health conditions. However, problems regarding the process of communication during team conferences are reported, such as the absence of a common language or viewpoint and the exchange of irrelevant or repeated information. To determine the outcome of interventions aimed at improving communication during team conferences, a reliable and valid assessment method is needed. To investigate the feasibility of a theory-based measurement instrument for assessing the process of the communication during multidisciplinary team conferences in rheumatology. An observation instrument was developed based on communication theory. The instrument distinguishes three types of communication: (I) grounding activities, (II) coordination of non-team activities, and (III) coordination of team activities. To assess the process of communication during team conferences in a rheumatology clinic with inpatient and day patient facilities, team conferences were videotaped. To determine the inter-rater reliability, in 20 conferences concerning 10 patients with rheumatoid arthritis admitted to the inpatient unit, the instrument was applied by two investigators independently. Content validity was determined by analysing and comparing the results of initial and follow-up team conferences of 25 consecutive patients with rheumatoid arthritis admitted to the day patient unit (Wilcoxon signed rank test). The inter-rater reliability was excellent with the intra-class correlation coefficients being >0.98 for both types I and III communications in 10 initial and 10 follow-up conferences (type II was not observed). An analysis of an additional 25 initial and 86 follow-up team conferences showed that time spent on grounding (type I) made up the greater part of the contents of communication (87% S.D. 14 and 60% S.D. 29 in initial and follow-up conferences, respectively), which is significantly more compared to time spent on co-ordination (p<0.001 and 0.02 for categories II and III, respectively). Moreover, significantly less time spent was spent on grounding in follow-up as compared to initial team conferences, whereas the time spent on coordination (type III) increased (both p-values<0.001). This theory-based measurement instrument for describing and evaluating the communication process during team conferences proved to be reliable and valid in this pilot study. Its usefulness to detect changes in the communication process, e.g. after implementing systems for re-structuring team conferences mediated by ICT applications, should be further examined.

Report on the 18th International Conference on X-ray and Inner-Shell Processes (X99).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gemmell, D. S.; Physics

2000-01-01

The 18th conference of the series served as a forum for discussing fundamental issues in the field of x-ray and inner-shell processes and their application in various disciplines of science and technology. Special emphasis was given to the opportunities offered by modern synchrotron x-ray sources. The program included plenary talks, progress reports and poster presentations relating to new developments in the field of x-ray and inner-shell processes. The range of topics included: X-ray interactions with atoms, molecules, clusters, surfaces and solids; Decay processes for inner-shell vacancies; X-ray absorption and emission spectroscopy - Photoionization processes; Phenomena associated with highly charged ionsmore » and collisions with energetic particles; Electron-spin and -momentum spectroscopy; X-ray scattering and spectroscopy in the study of magnetic systems; Applications in materials science, biology, geosciences, and other disciplines; Elastic and inelastic x-ray scattering processes in atoms and molecules; Threshold phenomena (post-collision interaction, resonant Raman processes, etc.); Nuclear absorption and scattering of x-rays; 'Fourth-generation' x-ray sources; Processes exploiting the polarization and coherence properties of x-ray beams; Developments in experimental techniques (x-ray optics, temporal techniques, detectors); Microscopy, spectromicroscopy, and various imaging techniques; Non-linear processes and x-ray lasers; Ionization and excitation induced by charged particles and by x-rays; and Exotic atoms (including 'hollow' atoms and atoms that contain 'exotic' particles).« less

Antimicrobial Treatment of Polymeric Medical Devices by Silver Nanomaterials and Related Technology

PubMed Central

Polívková, Markéta; Hubáček, Tomáš; Staszek, Marek; Švorčík, Václav; Siegel, Jakub

2017-01-01

Antimicrobial biocompatible polymers form a group of highly desirable materials in medicinal technology that exhibit interesting thermal and mechanical properties, and high chemical resistance. There are numerous types of polymers with antimicrobial activity or antimicrobial properties conferred through their proper modification. In this review, we focus on the second type of polymers, especially those whose antimicrobial activity is conferred by nanotechnology. Nanotechnology processing is a developing area that exploits the antibacterial effects of broad-scale compounds, both organic and inorganic, to form value-added medical devices. This work gives an overview of nanostructured antimicrobial agents, especially silver ones, used together with biocompatible polymers as effective antimicrobial composites in healthcare. The bactericidal properties of non-conventional antimicrobial agents are compared with those of conventional ones and the advantages and disadvantages are discussed. PMID:28212308

Brine flow in heated geologic salt.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuhlman, Kristopher L.; Malama, Bwalya

This report is a summary of the physical processes, primary governing equations, solution approaches, and historic testing related to brine migration in geologic salt. Although most information presented in this report is not new, we synthesize a large amount of material scattered across dozens of laboratory reports, journal papers, conference proceedings, and textbooks. We present a mathematical description of the governing brine flow mechanisms in geologic salt. We outline the general coupled thermal, multi-phase hydrologic, and mechanical processes. We derive these processes governing equations, which can be used to predict brine flow. These equations are valid under a wide varietymore » of conditions applicable to radioactive waste disposal in rooms and boreholes excavated into geologic salt.« less

Holographic femtosecond laser processing and its application to biological materials (Conference Presentation)

NASA Astrophysics Data System (ADS)

Hayasaki, Yoshio

2017-02-01

Femtosecond laser processing is a promising tool for fabricating novel and useful structures on the surfaces of and inside materials. An enormous number of pulse irradiation points will be required for fabricating actual structures with millimeter scale, and therefore, the throughput of femtosecond laser processing must be improved for practical adoption of this technique. One promising method to improve throughput is parallel pulse generation based on a computer-generated hologram (CGH) displayed on a spatial light modulator (SLM), a technique called holographic femtosecond laser processing. The holographic method has the advantages such as high throughput, high light use efficiency, and variable, instantaneous, and 3D patterning. Furthermore, the use of an SLM gives an ability to correct unknown imperfections of the optical system and inhomogeneity in a sample using in-system optimization of the CGH. Furthermore, the CGH can adaptively compensate in response to dynamic unpredictable mechanical movements, air and liquid disturbances, a shape variation and deformation of the target sample, as well as adaptive wavefront control for environmental changes. Therefore, it is a powerful tool for the fabrication of biological cells and tissues, because they have free form, variable, and deformable structures. In this paper, we present the principle and the experimental setup of holographic femtosecond laser processing, and the effective way for processing the biological sample. We demonstrate the femtosecond laser processing of biological materials and the processing properties.

Conference Abstracts: AEDS '84.

ERIC Educational Resources Information Center

Baird, William E.

1985-01-01

The Association of Educational Data Systems (AEDS) conference included 102 presentations. Abstracts of seven of these presentations are provided. Topic areas considered include LOGO, teaching probability through a computer game, writing effective computer assisted instructional materials, computer literacy, research on instructional…

PREFACE: XXI International Conference on Spectral Line Shapes (ICSLS 2012)

NASA Astrophysics Data System (ADS)

Devdariani, Alexander Z.

2012-12-01

The 21st International Conference on Spectral Line Shapes, ICSLS, was held in the historic main building of St Petersburg State University (St. Petersburg, Russia) on 3-9 June 2012. The event continued the tradition started in 1978 in Meudon Observatory in Paris. Representatives of line shape physics have since met every two years in different locations in Europe and North America. The most recent events were held in St John's, Newfoundland, Canada (2010), Valladolid, Spain (2008), and Auburn, AL (USA). Traditionally, the conferences consider experimental and theoretical issues of studying spectral line shapes, diagnostic utilization of spectral line profiles observed in absorption, emission or scattering of electromagnetic radiation by atoms, molecules, and clusters in different environments, including neutral environments, laboratory low and fusion plasmas, astrophysical conditions, and planetary atmospheres. The Conference was attended by over 100 professionals from Europe, Asia, America, Africa and New Zealand. The conference program was put together in such a way so as to exclude any parallel sessions. Five afternoon sessions featured 19 invited talks and 20 oral contributions, and two evening sessions offered 61 poster presentations, including post-deadline posters. This setup allowed for a relaxed and unhurried discussion of results and facilitated productive networking. The invited talks were selected by recommendation of members of the International Scientific Committee. The Organizers would like to thank all the members of the International Scientific Committee for their proposals on the agenda and their valuable advice. When considering candidates for oral contributions, the organizers took into account the suggestions and preferences of potential conference participants. When selecting the theses of poster presentations, the organizers focused on the topics in line with the theme of the conference and studies with well-formulated results. It must be noted that this year's conference included a noticeably larger number of reports on astrophysical applications and physics of planetary atmospheres. Another significant trend was related to a new area of inquiry: low temperature spectra, near-surface processes, and control and management of new technological processes. There were more presentations on elementary processes during the formation of spectral lines. Most of the presented studies were included in the Conference Proceedings publication. For the first time ever the proceedings will be published as a volume of Journal of Physics: Conference Series, published by the Institute of Physics (UK), making it possible to access the materials of the conference online. All published studies underwent peer review. The organizers would like to thank all the reviewers who found time to review the submissions against a very tight deadline during the summer. Professor N G Skvortsov, Vice-Rector for Research of St Petersburg State University, opened the conference. His speech was followed by a brief welcome message from Professor A Devdariani of St Petersburg State University, Deputy Chair of the Organizing Committee. An informal welcome party was held before the opening session. The cultural program of the event included various sightseeing tours, and a hydrofoil boat ride to the fountain city of Peterhof, where the delegates toured the park and attended a conference dinner. Organizers would like to express their appreciation to St Petersburg musicians, P Laul and D Kouzov for an excellent classical music concert. The conference included a meeting of the International Scientific Committee the minutes of the event are included in this volume (article number 011004). Most importantly, the next meeting, 22nd ICSLS, has been scheduled for 2014 in The Center for Laser Applications, The University of Tennessee Space Institute, US. Professor Christian Parriger will coordinate the organization. Organizers of the St Petersburg Conference would like to wish him and his colleagues every success for the next conference in Tennessee. The St Petersburg Conference was supported by the grants from St Petersburg State University, the Russian Foundation for Basic Research and Dynasty, Dmitry Zimin's Foundation for Non-Profit Programs. The Organizing Committee would like to thank them for their support. A word of thanks also goes to staff of the Research Department of St Petersburg State University for assistance with administrative issues, and to Mr S Slyusarev for creating the Conference logo and website. I would like to thank personally Professor A Kouzov, and Dr V Alexeev for providing much support in the process of preparing and holding the event in 2012. Alexander Z Devdariani St Petersburg University Conference photograph Sponsors St Petersburg University St Petersburg University Dynasty Foundation Dynasty Foundation Russian Foundation for Basic Research Russian Foundation for Basic Research

Industrial femtosecond lasers for machining of heat-sensitive polymers (Conference Presentation)

NASA Astrophysics Data System (ADS)

Hendricks, Frank; Bernard, Benjamin; Matylitsky, Victor V.

2017-03-01

Heat-sensitive materials, such as polymers, are used increasingly in various industrial sectors such as medical device manufacturing and organic electronics. Medical applications include implantable devices like stents, catheters and wires, which need to be structured and cut with minimum heat damage. Also the flat panel display market moves from LCD displays to organic LED (OLED) solutions, which utilize heat-sensitive polymer substrates. In both areas, the substrates often consist of multilayer stacks with different types of materials, such as metals, dielectric layers and polymers with different physical characteristic. The different thermal behavior and laser absorption properties of the materials used makes these stacks difficult to machine using conventional laser sources. Femtosecond lasers are an enabling technology for micromachining of these materials since it is possible to machine ultrafine structures with minimum thermal impact and very precise control over material removed. An industrial femtosecond Spirit HE laser system from Spectra-Physics with pulse duration <400 fs, pulse energies of >120 μJ and average output powers of >16 W is an ideal tool for industrial micromachining of a wide range of materials with highest quality and efficiency. The laser offers process flexibility with programmable pulse energy, repetition rate, and pulse width. In this paper, we provide an overview of machining heat-sensitive materials using Spirit HE laser. In particular, we show how the laser parameters (e.g. laser wavelength, pulse duration, applied energy and repetition rate) and the processing strategy (gas assisted single pass cut vs. multi-scan process) influence the efficiency and quality of laser processing.

PREFACE: International Conference on High Pressure Science and Technology, Joint AIRAPT-22 & HPCJ-50

NASA Astrophysics Data System (ADS)

Viña, Luis; Tejedor, Carlos; Calleja, José M.

2010-01-01

The International Joint AIRAPT-22 & HPCJ-50 Conference was held in Odaiba, Tokyo, on 26-31 July 2009. About 480 scientists from 24 countries attended the conference and 464 papers, including 3 plenary lectures, 39 invited talks, and 156 oral presentations, were presented. It is my great pleasure to present this proceedings volume, which is based on the high quality scientific works presented at the conference. The International AIRAPT conference has been held every two years in various countries around the world since 1965, while High Pressure Conference of Japan (HPCJ) has been held annually since 1959 in various Japanese cities. Pressure is a fundamental parameter to control the property of matter. As a result, both AIRAPT and HPCJ have become highly multidisciplinary, and cover Physics, Chemistry, Materials Science, Earth and Planetary Sciences, Biosciences, Food Science, and Technology. Although each discipline has a unique target, they all have high-pressure research in common. This proceedings volume includes about 200 papers of state-of-the-art studies from numerous fields. I hope this proceedings volume provides excellent pieces of information in various fields to further advance high-pressure research. Conference logo Takehiko Yagi Conference Chairman Institute for Solid State Physics The University of Tokyo 7 December 2009 Conference photograph Participants at the conference venue, Tokyo International Exchange Center, Odaiba, Tokyo, Japan. Editor in Chief TAKEMURA Kenichi National Institute for Materials Science, Japan Editorial board Tadashi KONDO Osaka University, Japan Hitoshi MATSUKI The University of Tokushima, Japan Nobuyuki MATUBAYASI Kyoto University, Japan Yoshihisa MORI Okayama University of Science, Japan Osamu OHTAKA Osaka University, Japan Chihiro SEKINE Muroran Institute of Technology, Japan

The Soviet-American Conference on Cosmochemistry of the Moon and Planets, Part 1

NASA Technical Reports Server (NTRS)

Pomeroy, J. H. (Editor); Hubbard, N. J. (Editor)

1977-01-01

The basic goal of the conference was consideration of the origin of the planets of the solar system, based on the physical and chemical data obtained by study of the material of the moon and planets. Papers at the conference were presented in the following sessions: (1) Differentiation of the material of the moon and planets; (2) The thermal history of the moon; (3) Lunar gravitation and magnetism; (4) Chronology of the moon, planets, and meteorites; (5) The role of exogenic factors in the formation of the lunar surface; (6) Cosmochemical hypotheses about the origin and evolution of the moon and planets; and (7) New data about the planets Mercury, Venus, Mars, and Jupiter.

2016 American Conference on Neutron Scattering (ACNS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Woodward, Patrick

The 8th American Conference on Neutron Scattering (ACNS) was held July 10-14, 2016 in Long Beach California, marking the first time the meeting has been held on the west coast. The meeting was coordinated by the Neutron Scattering Society of America (NSSA), and attracted 285 attendees. The meeting was chaired by NSSA vice president Patrick Woodward (the Ohio State University) assisted by NSSA president Stephan Rosenkranz (Argonne National Laboratory) together with the local organizing chair, Brent Fultz (California Institute of Technology). As in past years the Materials Research Society assisted with planning, logistics and operation of the conference. The sciencemore » program was divided into the following research areas: (a) Sources, Instrumentation, and Software; (b) Hard Condensed Matter; (c) Soft Matter; (d) Biology; (e) Materials Chemistry and Materials for Energy; (f) Engineering and Industrial Applications; and (g) Neutron Physics.« less

Adaptive and active materials: selected papers from the ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 12) (Stone Mountain, GA, USA, 19-21 September 2012)

NASA Astrophysics Data System (ADS)

Seelecke, Stefan; Erturk, Alper; Ounaies, Zoubeida; Naguib, Hani; Huber, John; Turner, Travis; Anderson, Iain; Philen, Michael; Baba Sundaresan, Vishnu

2013-09-01

The fifth annual meeting of the ASME/AIAA Smart Materials, Adaptive Structures and Intelligent Systems Conference (SMASIS) was held in beautiful Stone Mountain near Atlanta, GA. It is the conference's objective to provide an up-to-date overview of research trends in the entire field of smart materials systems. This was reflected in keynote speeches by Professor Eduard Arzt (Institute of New Materials and Saarland University, Saarbrücken, Germany) on 'Micro-patterned artificial 'Gecko' surfaces: a path to switchable adhesive function', by Professor Ray H Baughman (The Alan G MacDiarmid NanoTech Institute, University of Texas at Dallas) on 'The diverse and growing family of carbon nanotube and related artificial muscles', and by Professor Richard James (University of Minnesota) on 'The direct conversion of heat to electricity using multiferroic materials with phase transformations'. SMASIS 2012 was divided into eight symposia which span basic research, applied technological design and development, and industrial and governmental integrated system and application demonstrations. • SYMP 1. Development and characterization of multifunctional materials. • SYMP 2. Mechanics and behavior of active materials. • SYMP 3. Modeling, simulation and control of adaptive systems. • SYMP 4. Integrated system design and implementation. • SYMP 5. Structural health monitoring/NDE. • SYMP 6. Bio-inspired materials and systems. • SYMP 7. Energy harvesting. • SYMP 8. Structural and materials logic. This year we were particularly excited to introduce a new symposium on energy harvesting, which has quickly matured from a special track in previous years to an independent symposium for the first time. The subject cuts across fields by studying different materials, ranging from piezoelectrics to electroactive polymers, as well as by emphasizing different energy sources from wind to waves and ambient vibrations. Modeling, experimental studies, and technology applications all belong to the symposium topics. In addition, the conference also featured a special symposium dedicated to DARPA's structural and materials/logic program. The program seeks to enable structural systems to adapt to varying loads and simultaneously exhibit both high stiffness and high damping. Authors of selected papers in the materials areas (symposia 1, 2, and 6) as well as energy harvesting (symposium 7) were invited to write a full journal article on their presentation topic for publication in this special issue of Smart Materials and Structures . This collection of papers demonstrates the exceptional quality and originality of the conference presentations. We are very appreciative of their efforts to produce this collection of highly relevant articles on smart materials.

PREFACE: Soft Magnetic Materials 8

NASA Astrophysics Data System (ADS)

Pfützner, H.

1988-01-01

The Conference "Soft Magnetic Materials 8" was held from 1 to 4 September 1987 at the Congress Centre Badgastein, Austria. It was organized by the Division of Bioelectricity and Magnetism and by the Institute of Applied and Technical Physics of the University of Technology, Vienna. The Conference was the eighth in the bi-annual series which commenced in Turin, Italy. It was attended by about 130 scientists from universities and industrial companies from 19 countries. The theme of the Conference was the recent progress in industrial applications and developments of soft magnetic alloys including magnetic measurements and field computation problems as well as fundamental aspects. In five sessions, 13 invited papers were presented in oral form. In addition, the program of poster sessions included 122 contributed papers. Regrettably, some of them were not presented when authors (especially from Eastern European countries as well as from China) were unable to be present. A clear emphasis of papers was laid on characteristics and applications of amorphous materials. As confirmed by the delegates, the spacious Congress Centre—well aerated by the near-by waterfall—provided an effective environment for informal discussions. The Conference Dinner as well as the Mountain Lodge Evening were utilized for general communications in an intensive form. However, a slight mishap of this Conference should not be concealed: Due to a thunder storm, one delegate spent a long frosty night on a rock peak of Badgasteins mountains. Still, next day he presented his excellent paper in top condition. The next Conference, SMM9, is planned to be held in El Escorial, Spain, in 1989.

ACM Conference on Research and Development in Information Retrieval: Proceedings of the Annual Conference of the Association of Computing Machinery (Pisa, Italy, September 8-10, 1986).

ERIC Educational Resources Information Center

Rabitti, Fausto, Ed.

Intended to identify and encourage research, development, and applications of information retrieval, the principal objective of this conference was to provide an international forum to promote an understanding of current research and to stimulate the exchange of ideas and experiences in information retrieval systems. Introductory material for…

PREFACE: 18th Microscopy of Semiconducting Materials Conference (MSM XVIII)

NASA Astrophysics Data System (ADS)

Walther, T.; Hutchison, John L.

2013-11-01

YRM logo This volume contains invited and contributed papers from the 18th international conference on 'Microscopy of Semiconducting Materials' held at St Catherine's College, University of Oxford, on 7-11 April 2013. The meeting was organised under the auspices of the Royal Microscopical Society and supported by the Institute of Physics as well as the Materials Research Society of the USA. This conference series deals with recent advances in semiconductor studies carried out by all forms of microscopy, with an emphasis on electron microscopy and scanning probe microscopy with high spatial resolution. This time the meeting was attended by 109 delegates from 17 countries world-wide. We were welcomed by Professor Sir Peter Hirsch, who noted that this was the first of these conferences where Professor Tony Cullis was unable to attend, owing to ill-health. During the meeting a card containing greetings from many of Tony's friends and colleagues was signed, and duly sent to Tony afterwards. As semiconductor devices shrink further new routes for device processing and characterisation need to be developed, and, for the latter, methods that offer sub-nanometre spatial resolution are particularly valuable. The various forms of imaging, diffraction and spectroscopy available in modern microscopes are powerful tools for studying the microstructure, electronic structure, chemistry and also electric fields in semiconducting materials. Recent advances in instrumentation, from lens aberration correction in both TEM and STEM instruments, to the development of a wide range of scanning probe techniques, as well as new methods of signal quantification have been presented at this conference. Two topics that have at this meeting again highlighted the interesting contributions of aberration corrected transmission electron microscopy were: contrast quantification of annular dark-field STEM images in terms of chemical composition (Z-contrast), sample thickness and strain, and the study of dislocation core structures at atomic resolution. Conference photograph Figure 1. Conference photo taken by JLH inside St Catherine's College Each of the 49 manuscripts submitted for publication in this proceedings volume has been independently reviewed, most by two reviewers, and revised where necessary before being accepted for publication. The Editors are grateful to the following colleagues for their rapid and careful reviewing of manuscripts: R Beanland, C B Boothroyd, P D Brown, D Cherns, A J Craven, K Durose, C J Humphreys, U Kaiser, L Lari, G A Moebus, A G Norman, P Pecz, I M Ross, D J Smith and K Tillmann. Poster prizes were awarded to the following students: joint first prizes to Robert Schewski, Leibniz-Institut für Kristallzüchtung, Berlin and Xiaowei Wu, Rensselaer Polytechnic Institute, Troy; and joint second prizes to Tyche Perkisas, University of Antwerp and Adi Pantzer, Ben Gurion University of the Negev. These presentations indicated both a broad range of microscopy techniques and materials issues covered as well as the excellent standard of microscopy now being achieved by younger scientists. They also reflected the internationality of the attending scientists. On the evening of 9 April 2013, the RMS Annual Materials Lecture was delivered by Professor Sir Colin J Humphreys from the University of Cambridge. Colin's highly entertaining talk on 'How microscopy and semiconductors can help to solve some major world problems' spanned a very broad range, from detailed atomistic investigation of lattice defects in gallium nitride layers by transmission electron microscopy, to the production of new light emitting diodes and its impact on reducing both our electricity bills and the effect of global warming. Entertainment during the conference dinner was provided by the Ariella String Trio, and during the meal we held a friendly competition in which teams had to recognise invited speakers and organisers from photos of them as babies or young children. The organisers are very grateful to the following companies who contributed to the success of the meeting by presenting trade stands on 9 and 10 April: Agar Scientific, Fischione, Gatan, ISS Group Services and Leica Microsystems. St Catherine's College is thanked for provision of excellent accommodation, superb lecture facilities and the very friendly catering staff who served food and drink during the days. There was even a compliment from some of our French visitors for the cheese board during the conference dinner! Finally, we would like to thank the staff of the Royal Microscopical Society for their expert help in planning and support of this conference - in particular Victoria Masters and her assistant Alice Pyper for their dedicated professional support and always joyful approach to any issues that arose. September 2013 Thomas Walther John L Hutchison

2008 Gordon Research Conference on Rock Deformation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hirth, James G.; Gray, Nancy Ryan

2009-09-21

The GRC on Rock Deformation highlights the latest research in brittle and ductile rock mechanics from experimental, field and theoretical perspectives. The conference promotes a multi-disciplinary forum for assessing our understanding of rock strength and related physical properties in the Earth. The theme for the 2008 conference is 'Real-time Rheology'. Using ever-improving geophysical techniques, our ability to constrain the rheological behavior during earthquakes and post-seismic creep has improved significantly. Such data are used to investigate the frictional behavior of faults, processes responsible for strain localization, the viscosity of the lower crust, and viscous coupling between the crust and mantle. Seismologicalmore » data also provide information on the rheology of the lower crust and mantle through analysis of seismic attenuation and anisotropy. Geologists are improving our understanding of rheology by combining novel analyses of microstructures in naturally deformed rocks with petrologic data. This conference will bring together experts and students in these research areas with experimentalists and theoreticians studying the same processes. We will discuss and assess where agreement exists on rheological constraints derived at different length/time scales using different techniques - and where new insight is required. To encompass the elements of these topics, speakers and discussion leaders with backgrounds in geodesy, experimental rock deformation, structural geology, earthquake seismology, geodynamics, glaciology, materials science, and mineral physics will be invited to the conference. Thematic sessions will be organized on the dynamics of earthquake rupture, the rheology of the lower crust and coupling with the upper mantle, the measurement and interpretation of seismic attenuation and anisotropy, the dynamics of ice sheets and the coupling of reactive porous flow and brittle deformation for understanding geothermal and chemical properties of the shallow crust that are important for developing ideas in CO2 sequestration, geothermal and petrochemical research and the mechanics of shallow faults.« less

PREFACE: 17th International Conference on Textures of Materials (ICOTOM 17)

NASA Astrophysics Data System (ADS)

Skrotzki, Werner; Oertel, Carl-Georg

2015-04-01

The 17th International Conference on Textures of Materials (ICOTOM 17) took place in Dresden, Germany, August 24-29, 2014. It belongs to the "triennial" series of ICOTOM meetings with a long tradition, starting in 1969 - Clausthal, 1971 - Cracow, 1973 - Pont-à-Mousson, 1975 - Cambridge, 1978 - Aachen, 1981 - Tokyo, 1984 - Noordwijkerhout, 1987 - Santa Fe, 1990 - Avignon, 1993 - Clausthal, 1996 - Xian, 1999 - Montreal, 2002 - Seoul, 2005 - Leuven, 2008 - Pittsburgh, 2011 - Mumbai, 2014 - Dresden. ICOTOM 17 was hosted by the Dresden University of Technology, Institute of Structural Physics. Following the tradition of the ICOTOM conferences, the main focus of ICOTOM-17 was to promote and strengthen the fundamental understanding of the basic processes that govern the formation of texture and its relation to the properties of polycrystalline materials. Nonetheless, it was the aim to forge links between basic research on model materials and applied research on engineering materials of technical importance. Thus, ICOTOM 17 provided a forum for the presentation and discussion of recent progress in research of texture and related anisotropy of mechanical and functional properties of all kinds of polycrystalline materials including natural materials like rocks. Particular attention was paid to recent advances in texture measurement and analysis as well as modeling of texture development for all kinds of processes like solidification, plastic deformation, recrystallization and grain growth, phase transformations, thin film deposition, etc. Hence, ICOTOM 17 was of great interest to materials scientists, engineers from many different areas and geoscientists. The topics covered by ICOTOM 17 were: 1. Mathematical, numerical and statistical methods of texture analysis 2. Deformation textures 3. Crystallization, recrystallization and growth textures 4. Transformation textures 5. Textures in functional materials 6. Textures in advanced materials 7. Textures in rocks 8. Texture related research on microstructures 9. Texture-induced anisotropy 10. Insight through new experimental methods 11. Technological applications of texture studies 12. Other new developments and future trends related to the field While there was large interest in the topics 2, 3 and 8, contributions to topic 7 were much less than expected. ICOTOM 17 attracted 266 scientists from 34 countries with about one third of the participants being students. This is a very good ratio showing that we could attract the young generation. There have been 216 oral and 76 poster presentations, three of which received a poster award. It is our pleasure to thank the members of the International ICOTOM Committee for their valuable help, especially for proposing and choosing the 15 plenary speakers as well as the distinguished scientist of the texture community for the "Bunge Award". 130 papers were submitted for publication in the proceedings, 116 were accepted after reviewing. We would like to express our thanks to all referees for their efficient and prompt efforts. We acknowledge particularly support from the German Research Society (DFG) and the City of Dresden. We are also grateful for industrial support from Bruker Nano GmbH, Oxford Instruments GmbH, Ametek GmbH / EDAX, Labosoft S.C., PANalytical GmbH and IOP Publishing. Finally we thank all members of the National Organizing Committee, Intercom Dresden and Conwerk / Laboratory Ten for the excellent organization of ICOTOM 17 and the very pleasant collaboration. On the first day of the conference three tutorials have been offered. Each of them has been attended by about 30 participants. 1. Texture-aided residual stress identification system (TARSIuS) (organized by Prof. Dr. J. Bonarski and Mr. B. Kania) 2. MTEX - MATLAB toolbox for quantitative texture analysis (organized by Dr. R. Hielscher and Mr. F. Bachmann) 3. Grain boundary engineering (organized by Prof. N. Bozzolo and Prof. Dr. A.D. Rollett) A highlight of ICOTOM 17 was the ceremony honoring Prof. Dr. Claude Esling with the Bunge Award for his distinguished contributions to the field of Textures of Materials and his continuous effort to pass on his knowledge to future generations of texture experts. The Bunge Award is named after Professor Hans Bunge († 2004), to whom the world's texture community is very much indebted not only for his magisterial work on the Mathematical Theory of Texture, but also for his lifelong promotion of the field of Textures of Materials. To the great delight of all participants, Helga Bunge and her son Prof. Hans-Peter Bunge, to whom many of the older generation have a personal relationship, attended the ceremony (see Fig. 1 in the PDF). Following the award ceremony Prof. Dr. Claude Esling gave an in memoriam tribute to Prof. Dr. Richard Penelle, who was an internationally recognized texture specialist. Details can be found in the proceedings paper by Esling et al. [this issue]. During the conference the International ICSMA Committee decided to convene the next conference in St. George, USA, in 2017. We wish the organizers of ICOTOM 18 great success and look forward to meeting you in St. George. Werner Skrotzki* (Chairman of ICOTOM 17, Dresden University of Technology) Carl-Georg Oertel (Dresden University of Technology) Guest Editors Dresden, March, 2015 (* Corresponding author; e-mail address: werner.skrotzki@tu-dresden.de)

Aerogel Blanket Insulation Materials for Cryogenic Applications

NASA Technical Reports Server (NTRS)

Coffman, B. E.; Fesmire, J. E.; White, S.; Gould, G.; Augustynowicz, S.

2009-01-01

Aerogel blanket materials for use in thermal insulation systems are now commercially available and implemented by industry. Prototype aerogel blanket materials were presented at the Cryogenic Engineering Conference in 1997 and by 2004 had progressed to full commercial production by Aspen Aerogels. Today, this new technology material is providing superior energy efficiencies and enabling new design approaches for more cost effective cryogenic systems. Aerogel processing technology and methods are continuing to improve, offering a tailor-able array of product formulations for many different thermal and environmental requirements. Many different varieties and combinations of aerogel blankets have been characterized using insulation test cryostats at the Cryogenics Test Laboratory of NASA Kennedy Space Center. Detailed thermal conductivity data for a select group of materials are presented for engineering use. Heat transfer evaluations for the entire vacuum pressure range, including ambient conditions, are given. Examples of current cryogenic applications of aerogel blanket insulation are also given. KEYWORDS: Cryogenic tanks, thermal insulation, composite materials, aerogel, thermal conductivity, liquid nitrogen boil-off

Second Conference on NDE for Aerospace Requirements

NASA Technical Reports Server (NTRS)

Woodis, Kenneth W. (Compiler); Bryson, Craig C. (Compiler); Workman, Gary L. (Compiler)

1990-01-01

Nondestructive evaluation and inspection procedures must constantly improve rapidly in order to keep pace with corresponding advances being made in aerospace material and systems. In response to this need, the 1989 Conference was organized to provide a forum for discussion between the materials scientists, systems designers, and NDE engineers who produce current and future aerospace systems. It is anticipated that problems in current systems can be resolved more quickly and that new materials and structures can be designed and manufactured in such a way as to be more easily inspected and to perform reliably over the life cycle of the system.

Fibre Concrete 2017

NASA Astrophysics Data System (ADS)

2017-09-01

9th international conference on fibre reinforced concretes (FRC), textile reinforced concretes (TRC) and ultra-high performance concretes (UHPC) Preface The Fibre Concrete Conference series is held biennially to provide a platform to share knowledge on fibre reinforced concretes, textile concretes and ultra-high performance concretes regarding material properties and behaviour, technology procedures, topics of long-term behaviour, creep, durability; sustainable aspects of concrete including utilisation of waste materials in concrete production and recycling of concrete. The tradition of Fibre Concrete Conferences started in eighties of the last century. Nowadays the conference is organized by the Department of Concrete and Masonry Structures of the Czech Technical University in Prague, Faculty of Civil Engineering. The 9th International Conference Fibre Concrete 2017 had 109 participants from 27 countries all over the world. 55 papers were presented including keynote lectures of Professor Bažant, Professor Bartoš and Dr. Broukalová. The conference program covered wide range of topics from scientific research to practical applications. The presented contributions related to performance and behaviour of cement based composites, their long-term behaviour and durability, sustainable aspects, advanced analyses of structures from these composites and successful applications. This conference was organized also to honour Professor Zděnek P. Bažant on the occasion of his jubilee and to appreciate his merits and discoveries in the field of fibre reinforced composites, structural mechanics and engineering.

EDITORIAL: Adaptive and active materials: Selected papers from the ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 11) (Scottsdale, AZ, USA, 18-21 September 2011) Adaptive and active materials: Selected papers from the ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 11) (Scottsdale, AZ, USA, 18-21 September 2011)

NASA Astrophysics Data System (ADS)

Brei, Diann

2012-09-01

The fourth annual meeting of the ASME/AIAA Smart Materials, Adaptive Structures and Intelligent Systems Conference (SMASIS) took place in sunny Scottsdale, Arizona. Each year we strive to grow and offer new experiences. This year we held a special Guest Symposium on Sustainability along with two focused topic tracks on energy harvesting and active composites to encourage cross-fertilization between these important fields and our community. This cross-disciplinary emphasis was reflected in keynote talks by Dr Wayne Brown, President and founder of Dynalloy, Inc., 'Cross-Discipline Sharing'; Dr Brad Allenby, Arizona State University, 'You Want the Future? You can't Handle the Future!'; and Professor Aditi Chattopadhyay, Arizona State University, 'A Multidisciplinary Approach to Structural Health Monitoring and Prognosis'. SMASIS continues to grow our community through both social and technical interchange. The conference location, the exotic Firesky Resort and Spa, exemplified the theme of our Guest Symposium on Sustainability, being the only Green Seal certified resort in Arizona, and highlighting four elements thought to represent all that exist: fire, water, earth and air. Several special events were held around this theme including the night at the oasis reception sponsored by General Motors, sustainability bingo, smart trivia and student networking lunches, and an Arizona pow-wow with a spectacular Indian hoop dance. Our student and young professional development continues to grow strong with best paper and hardware competitions, scavenger student outing and games night. We are very proud that our students and young professionals are always seeking out ways to give back to the community, including organizing outreach to local high school talent. We thank all of our sponsors who made these special events possible. We hope that these social events provided participants with the opportunity to expand their own personal community and broaden their horizons. Our ultimate goal was to provide a friendly, casual southwestern forum for the exchange of the 'hottest' ideas and latest results. Our sincere appreciation goes to all the presenters for choosing to share their very best work at this conference. SMASIS is divided into seven symposia which span basic research, applied technological design and development, and industrial and governmental integrated system and application demonstrations: SYMP 1 Multifunctional Materials; SYMP 2 Active Materials, Mechanics and Behavior; SYMP 3 Modeling, Simulation and Control; SYMP 4 Enabling Technologies and Integrated System Design; SYMP 5 Structural Health Monitoring/NDE; SYMP 6 Bio-inspired Smart Materials and Structures; and SYMP 7 Guest Symposium on Sustainability. In addition, the conference introduced a new student and young professional development symposium. Authors of papers in the materials area (symposia 1, 2 and 6) were invited to write a full journal article on their presentation topic for publication in this Special Issue of Smart Materials and Structures. This collection of papers demonstrates the exceptional quality and originality of the conference presentations. We appreciate their efforts in producing this collection of highly relevant articles on smart materials.

Ultrafast Phenomena XIV

NASA Astrophysics Data System (ADS)

Kobayashi, Takayoshi; Okada, Tadashi; Kobayashi, Tetsuro; Nelson, Keith A.; de Silvestri, Sandro

Ultrafast Phenomena XIV presents the latest advances in ultrafast science, including ultrafast laser and measurement technology as well as studies of ultrafast phenomena. Pico-, femto-, and atosecond processes relevant in physics, chemistry, biology, and engineering are presented. Ultrafast technology is now having a profound impact within a wide range of applications, among them imaging, material diagnostics, and transformation and high-speed optoelectronics . This book summarizes results presented at the 14th Ultrafast Phenomena Conference and reviews the state of the art in this important and rapidly advancing field.

Technology 2000, volume 2

NASA Technical Reports Server (NTRS)

1991-01-01

Technology 2000 was the first major industrial conference and exposition spotlighting NASA technology and technology transfer. It's purpose was, and continues to be, to increase awareness of existing NASA-developed technologies that are available for immediate use in the development of new products and processes, and to lay the groundwork for the effective utilization of emerging technologies. Included are sessions on: computer technology and software engineering; human factors engineering and life sciences; materials science; sensors and measurement technology; artificial intelligence; environmental technology; optics and communications; and superconductivity.

Summaries of press automation conference presented

NASA Astrophysics Data System (ADS)

Makhlin, A. Y.; Pokrovskaya, G. M.

1985-01-01

The automation and mechanization of cold and hot stamping were discussed. Problems in the comprehensive mechanization and automatio of stamping in machine building development were examined. Automation becomes effective when it is implemented in progressive manufacturing processes and a comprehensive approach to the solution of all problems, beginning with the delivery of initial materials and ending with the transportation of finished products to the warehouse. Production intensification and improvments of effectiveness of produced output through the comprehensive mechanization and automation of stamping operations are reported.

Technology 2000, volume 1

NASA Technical Reports Server (NTRS)

1991-01-01

The purpose of the conference was to increase awareness of existing NASA developed technologies that are available for immediate use in the development of new products and processes, and to lay the groundwork for the effective utilization of emerging technologies. There were sessions on the following: Computer technology and software engineering; Human factors engineering and life sciences; Information and data management; Material sciences; Manufacturing and fabrication technology; Power, energy, and control systems; Robotics; Sensors and measurement technology; Artificial intelligence; Environmental technology; Optics and communications; and Superconductivity.

Space Station Workshop Commercial Missions and User Requirements: Issues and Recommendations

NASA Technical Reports Server (NTRS)

1988-01-01

The issues and recommendations of a conference on the Space Station are presented. The subjects are organized under three headings of: materials and processing in space, earth and ocean observations, and industrial services. One hundred and two issues and recommendations which resulted from the workskop are categorized for each discipline subpanel. Responses to these issues and recommendations are based on more than twenty interviews with highly qualified NASA personnel and represent the best answers available at this time.

Analysis of Textile Composite Structures Subjected to High Temperature Oxidizing Environment

DTIC Science & Technology

2010-08-01

process in a polymer is a combination of the diffusion of oxygen and its consumption by reaction, which also results in the creation of by-products...based on the work by Pochiraju et al[24-26] in which they used the conservation of mass law for diffusion with a term to model the rate of consumption ...Oxidation of C/SiC Composites, Proceedings of the 21st Annual Conference on Composites, Advanced Ceramics Materials and Structures, Cocoa Beach

Impact of Gender and Conference Size on Conference Preferences--Employing Natural Language Processing

ERIC Educational Resources Information Center

Eckhaus, Eyal; Davidovitch, Nitza

2018-01-01

This pilot study focuses on the impact of academic conferences from a gender-based perspective. What motivates faculty members to attend conferences? Which conferences do they choose? Can differences be found between men and women in their attitude to the effect of the conference and its contribution to their academic work, in light of many…

SOLTECH 1992 proceedings: Solar Process Heat Program, volume 1

NASA Astrophysics Data System (ADS)

1992-03-01

This document is a limited Proceedings, documenting the presentations given at the symposia conducted by the U.S. Department of Energy's (DOE) Solar Industrial Program and Solar Thermal Electrical Program at SOLTECH92. The SOLTECH92 national solar energy conference was held in Albuquerque, New Mexico during the period February 17-20, 1992. The National Renewable Energy Laboratory manages the Solar Industrial Program; Sandia National Laboratories (Albuquerque) manages the Solar Thermal Electric Program. The symposia sessions were as follows: (1) Solar Industrial Program and Solar Thermal Electric Program Overviews, (2) Solar Process Heat Applications, (3) Solar Decontamination of Water and Soil, (4) Solar Building Technologies, (5) Solar Thermal Electric Systems, and (6) Photovoltaic (PV) Applications and Technologies. For each presentation given in these symposia, these Proceedings provide a one- to two-page abstract and copies of the viewgraphs and/or 35 mm slides utilized by the speaker. Some speakers provided additional materials in the interest of completeness. The materials presented in this document were not subjected to a peer review process.

PREFACE: 23rd International Conference on High Pressure Science and Technology (AIRAPT-23)

NASA Astrophysics Data System (ADS)

Gupta, Satish C.

2012-07-01

The 23rd AIRAPT International Conference on High Pressure Science and Technology was held at Bhabha Atomic Research Centre, Mumbai, from 25-30 September 2011. This conference is part of the series of AIRAPT International Conferences which are held biennially. AIRAPT is an acronym for the French title which translates as 'International Association for the Advancement of High Pressure Science and Technology'. This was the second time the AIRAPT Conference was organized in India. The first was held 20 years ago at the National Aeronautical Laboratory, Bangalore in 1991. The 23rd Conference covered many important topics in the area of both static and dynamic high pressures including theoretical and experimental investigations on the response of materials under high pressures, new developments using neutron and synchrotron sources, investigations on superconductivity under high pressure, studies of geophysical and planetary sciences, biosciences, and the synthesis of new materials. The conference program included Bridgman award lecture, Jemieson award lecture, seven plenary talks, 85 invited talks, 83 oral presentations and about 195 posters. In all there were 372 presentations. 285 scientists from 19 countries participated in the conference. The countries represented included Austria, Canada, China, Estonia, France, Germany, India, Israel, Italy, Japan, Nepal, New Zealand, Poland, Russia, South Korea, Spain, Sweden, Switzerland, Turkey, UK, Ukraine and USA. Many new developments were presented, for example, measurement techniques using the new generation synchrotron sources, more powerful neutron sources and much brighter laser sources; integration of gas-gun with synchrotron source; the achievement of multi-megabar pressures in shock-less dynamic compressions; and capabilities to synthesize centimeter size diamonds with better quality. All these developments have opened up new opportunities for understanding the physics of materials under high pressures. I would like to thank all those who have made valuable contributions to the success of the conference, which include the members of the AIRAPT executive committee, the International Advisory Committee and National Advisory Committee, the plenary speakers, invited speakers, the chairmen of various sessions, all the participants, and the authors of the papers in this volume. All the papers accepted for the proceedings have been reviewed by two independent referees. I am extremely thankful to all the anonymous referees, who have spent their valuable time to ensure the quality of the papers of this volume. I wish to express my gratitude to the members of the Local Organizing Committee for their help and hard work for the success of the conference. Finally, I convey my special thanks to Dr T C Kaushik and Dr K D Joshi, who worked tirelessly and enthusiastically towards making this conference a success. I am confident that this volume of the Conference proceedings will provide an excellent source of information on the current trends in the field of High Pressure Science and Technology. Satish C Gupta Conference Chairman 25-30 September 2011 Conference logo Conference photograph

Claremont Reading Conference. Thirty-Fourth Yearbook.

ERIC Educational Resources Information Center

Douglass, Malcolm P., Ed.

This collection of 19 articles included in the 34th Yearbook of the Claremont Reading Conference focuses on the theme "Reading and School Life," with specific emphasis on how the quality of school experiences affects the reader and the development of the reading process. The permanent conference theme is "Reading is the Process of Making…

Drama: Same Difference--Diversity and Mutuality of Process and Practice--National Drama Conference 2011

ERIC Educational Resources Information Center

Gyokery, Lisa; Lam, Van Va; Hida, Norifumi; Kim, Su-yuon; Efthymiou, Antri; Frost, Wendy; Lewis, Janine; Broekman, Kirsten

2012-01-01

This article presents reviews of different conferences that focus on drama education. It first presents six perspectives on " Drama: same difference: diversity and mutuality of process and practice--National Drama Conference 2011," held in Swansea University, UK, 11-14 April 2011. Then it presents reviews of "2011 African Theatre…

Ethical Issues in Disability and Rehabilitation. Report of an International Conference of the Society for Disability Studies (2nd, Denver, Colorado, June 23-24, 1989).

ERIC Educational Resources Information Center

Duncan, Barbara, Ed.; Woods, Diane E., Ed.

This monograph consists of five parts: (1) introductory material including a conference overview; (2) papers presented at an international symposium on the topic of ethical issues in disability and rehabilitation as a section of the Annual Conference of the Society for Disability Studies; (3) responses to the symposium, prepared by four of the…

PREFACE: 14th International Conference on Transport in Interacting Disordered Systems (TIDS-14)

NASA Astrophysics Data System (ADS)

Frydman, Aviad

2012-07-01

The '14th Transport in interacting disordered systems - TIDS14' conference took place during 5-8 September 2011 in Acre Israel. The conference was a continuation of the biennial meeting traditionally called HRP (hopping and related phenomena) and later named TIDS (transport in interacting disordered systems). Previous conferences took place in Trieste (1985), Bratislava (1987), Chapel Hill (1989), Marburg (1991), Glasgow (1993), Jerusalem (1995), Rackeve (1997), Murcia (1999), Shefayim (2001), Trieste (2003), Egmond, aan Zee (2005), Marburg (2007) and Rackeve (2009). Central to these conferences are systems that are characterized by a large degree of disorder and hence they lack translational symmetry. In such systems interactions are usually very important. Dramatic differences in the behavior of crystalline solids and the 'disordered' systems are possible. Some examples of the latter are amorphous materials, polymer aggregates, materials whose properties are governed by impurities, granular systems and biological systems. This conference series is notable for the pleasant atmosphere and fruitful exchange of ideas between theoreticians and experimentalists in these areas. This tradition was also maintained in the conference in Israel. Specific topics of TIDS14 included: hopping, electron and Coulomb glasses, Anderson localization and many body localization, noise, magneto-transport, metal-insulator and superconductor-insulator transition, transport through low dimensional and nanostructures, quantum coherence, interference and dephasing and other related topics. Over sixty scientists from fourteen countries participated in the conference and presented papers either as oral presentations or as posters in two sessions that took place during the conference. Many of these papers are included in these proceedings. I would like to thank all the conference participants for the interesting presentations, debates and discussions that created a stimulating but pleasant environment. Also, I thank the other members of the local organizing committee Tal Havdala and Shachaf Poran from Bar Ilan University and the members of the international advisory committee. I gratefully acknowledge support from the Israel Science foundation and from Bar Ilan University. Aviad Frydman Conference chairman Bar Ilan University

PREFACE: The 10th General Conference of the Condensed Matter Division of the European Physical Society

NASA Astrophysics Data System (ADS)

Sousa, J. B.

1991-01-01

The 10th General Conference of the Condensed Matter Division of the European Physical Society was held in Lisbon from 9 to 12 April 1990; it was attended by 670 scientists from 28 countries of Europe and overseas. Following the tradition of the series, the Lisbon EPS Conference covered most of the relevant topics in Condensed Matter Physics, organized in three major Symposia: Soft Matter and Polymers, Solid State Physics and The Physics of Materials for future Electronics. The last Symposium was jointly organized with the European Materials Research Society, starting a timely cooperation between both European Societies in important scientific and technological areas of common interest. The Conference included 4 plenary lectures, 69 invited talks and 440 contributions in poster sessions. The present volume T35 of the Topical Issues of Physica Scripta, contains papers of the invited talks. The motivation of this volume is to present a wider information of the contents of the Conference, and also to offer to the participants, and in particular to the younger ones, the opportunity of a deeper personal analysis of the ideas and concepts that have been under discussion during the four days of the Conference. The local organization of the Conference was the responsibility of the Portuguese Physical Society, through its Division of Condensed Matter Physics. The event substituted in 1990 the Iberian Symposium on Condensed Matter Physics, which is regularly and alternatively organized in Spain and Portugal every two years, under the special sponsorship of Unesco. We wish to express our thanks to the Conference Committees, to the authors and the individuals who contributed to the contents of the Conference. A special acknowledgement is due to the Sponsors for their generous support of this event.

46 CFR 153.968 - Cargo transfer conference.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 5 2012-10-01 2012-10-01 false Cargo transfer conference. 153.968 Section 153.968 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations Cargo Transfer...

46 CFR 153.968 - Cargo transfer conference.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 5 2014-10-01 2014-10-01 false Cargo transfer conference. 153.968 Section 153.968 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations Cargo Transfer...

46 CFR 153.968 - Cargo transfer conference.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 5 2013-10-01 2013-10-01 false Cargo transfer conference. 153.968 Section 153.968 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations Cargo Transfer...

46 CFR 153.968 - Cargo transfer conference.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 5 2011-10-01 2011-10-01 false Cargo transfer conference. 153.968 Section 153.968 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Operations Cargo Transfer...

Cesium-diode performances from the 1963-to-1971 Thermionic Conversion Specialist Conferences

NASA Technical Reports Server (NTRS)

Morris, J. F.

1972-01-01

Indexes and summaries of the conference papers containing cesium-diode results are presented. Lists of converter materials, geometries, conditions, outputs, and lifetimes accompany the references. Simple chemical designations for emitters, collectors, and additives direct the reader to appropriate selections.

PREFACE: Electrostatics 2015

NASA Astrophysics Data System (ADS)

Matthews, James

2015-10-01

Electrostatics 2015, supported by the Institute of Physics, was held in the Sir James Matthews building at Southampton Solent University, UK between 12th and 16th April 2015. Southampton is a historic city on the South Coast of England with a strong military and maritime history. Southampton is home to two Universities: Solent University, which hosted the conference, and the University of Southampton, where much work is undertaken related to electrostatics. 37 oral and 44 poster presentations were accepted for the conference, and 60 papers were submitted and accepted for the proceedings. The Bill Bright Memorial Lecture was delivered this year by Professor Mark Horenstein from Boston University who was, until recently, Editor-in-Chief of the Journal of Electrostatics. He spoke on The contribution of surface potential to diverse problems in electrostatics and his thorough knowledge of the subject of electrostatics was evident in the presentation. The first session was chaired by the Conference Chair, Dr Keith Davies, whose experience in the field showed through his frequent contributions to the discussions throughout the conference. Hazards and Electrostatic Discharge have formed a strong core to Electrostatics conferences for many years, and this conference contained sessions on both Hazards and on ESD, including an invited talk from Dr Jeremy Smallwood on ESD in Industry - Present and Future. Another strong theme to emerge from this year's programme was Non-Thermal Plasmas, which was covered in two sessions. There were two invited talks on this subject: Professor Masaaki Okubo gave a talk on Development of super-clean diesel engine and combustor using nonthermal plasma hybrid after treatment and Dr David Go presented a talk on Atmospheric-pressure ionization processes: New approaches and applications for plasmas in contact with liquids. A new innovation to the conference this year was the opportunity for conference sponsors to present to the delegates a technical presentation related to their work. Chilworth Technology and Infolytica both took advantage of this opportunity. David Firth from Chilworth Technology delivered some case studies related to process safety and Chris Emson from Infolytica compared the different types of modelling software used in industry and academia. For two days of the conference, an exhibition was held for delegates to meet and discuss their work with interested companies. Sessions on Modelling and Simulation and on Measurement and Instrumentation were included. Recent successful IOP meetings on Electrospinning and Electrospray prove that this is an important topic, and were the subject of a session in the conference, including an invited talk by Dr Horst von Recum on Electrospun materials for affinity based drug delivery. The conference finished with a session on Environmental and Space Applications. The Southampton Yacht Club provided a fitting venue for the conference dinner on the Wednesday evening. Meal times, and conference dinners in particular, are always a great opportunity to meet with other workers in related fields, and there were many conversations started in question and answer sessions that continued over a plate of food. Within the conference dinner, prizes were awarded for the best student work. Ladislav Konopka's talk in the modelling and simulation session discussed how different particle sizes can be shown to transfer charge in a modelled system. Matthias Perez's poster presented early work on the use of a small-scale wind turbine to generate wind power. The discussions both within the lecture theatre and the ongoing discussions that occur over coffee and tea in between sessions are often a place where new ideas are shared. In fact, the presentation submitted by Dr Atsushi Ohsawa, Charge neutralisation from the side surface of an insulating plate, acknowledged an inspiration from a question raised at a previous Electrostatics conference in Budapest in 2013. In these proceedings the conference committee took the decision to transcribe the questions and answers to leave a lasting record of the conversations that took place after each oral presentation and they are included in the printed proceedings. I am very grateful to Keith Davies and the conference committee, and Joanne Hemstock and other IOP staff, who provided advice and assistance throughout the whole process. A peer reviewed proceedings is not possible without willing expert reviewers who are able to provide reviews on abstracts and submitted papers. I am grateful to all who undertook reviews throughout the process. I hope to see many of this year's delegates in four years time for Electrostatics 2019.

PREFACE: 15th International Conference on the Strength of Materials (ICSMA-15)

NASA Astrophysics Data System (ADS)

Skrotzki, Werner; Oertel, Carl-Georg; Biermann, Horst; Heilmaier, Martin

2010-04-01

The 15th International Conference on the Strength of Materials (ICSMA 15) took place in Dresden, Germany, August 16-21, 2009. It belongs to the triennial series of ICSMA meetings with a long tradition, starting in 1967 - Tokyo, 1970 - Asilomar, 1973 - Cambridge, 1976 - Nancy, 1979 - Aachen, 1982 - Melbourne, 1985 - Montreal, 1988 - Tampere, 1991 - Haifa, 1994 - Sendai, 1997 - Prague, 2000 - Asilomar, 2003 - Budapest, 2006 - Xian. ICSMA 15 was hosted by the Dresden University of Technology, Institute of Structural Physics. Following the tradition of this conference series, it was the main focus of ICSMA 15 to promote and strengthen the fundamental understanding of the basic processes that govern the strength of materials. Nonetheless, it was the aim to forge links between basic research on model materials and applied research on engineering materials of technical importance. Thus, ICSMA 15 provided a forum for the presentation and discussion of research on the mechanical properties of all materials which are of interest to materials scientists and engineers from many different areas. The topics covered by ICSMA 15 were: 1.Atomistic and microstructural aspects of plastic deformation 2.Atomistic and microstructural aspects of fracture 3.Adhesion and interfacial strength 4.Cyclic deformation and fatigue 5.High temperature deformation and creep 6.Mechanical properties related to phase transformations 7.Large and severe plastic deformation 8.Nano- and microscale phenomena in plasticity and fracture 9.Strength issues in biological systems and biomaterials 10.Mechanical behaviour of glasses and non-crystalline solids 11.Multiscale modelling and experimental validation 12.Insight through new experimental methods 13.Other new developments related to the field While there was large interest in the new topics 7 and 8, contributions to topic 9 were much less than expected. ICSMA 15 attracted 352 scientists from 30 countries with one fourth of the participants being students. This is a very good ratio showing that we could attract the young generation. There have been 272 oral and 135 poster presentations. It is our pleasure to thank the members of the International ICSMA Committee for their valuable help, especially for proposing and choosing the 18 plenary speakers. 187 papers were submitted for publication in the proceedings, 167 were accepted after reviewing. We would like to express our thanks to all referees for their efficient and prompt efforts. We acknowledge particularly support from the German Research Society (DFG), the Saxon Ministry for Science and Art and the City of Dresden. We are also grateful for industrial support from PLANSEE Metall GmbH, Goodfellow GmbH, MTS Systems GMB, Nagoya University and IOP Publishing. Finally we thank all members of the Local Organizing Committee, Intercom Dresden and Conwerk / Laboratory Ten for the excellent organization of ICSMA 15 and the very pleasant collaboration. During the conference the International ICSMA Committee decided to convene the next conference in Bangalore, India, in 2012. We wish the organizers of ICSMA 16 great success and look forward to meeting you in Bangalore. Werner Skrotzki (Technische Universität Dresden) Carl-Georg Oertel (Technische Universität Dresden) Horst Biermann (Bergakademie Technische Universität Freiberg) Martin Heilmaier (Technische Universität Darmstadt) Guest Editors Dresden, June 23, 2009 (* Corresponding author; e-mail address: werner.skrotzki@physik.tu-dresden.de)

7th International Conference on Excitonic Processes in Condensed Matter (EXCON'06) Winston-Salem, NC, USA, 26-30 June 2006

NASA Astrophysics Data System (ADS)

Petelenz, P.; Schreiber, M.

2006-10-01

This conference report is meant to offer an authoritative view on a recently held scientific meeting rather than a comprehensive list of the conference presentations. We tried to describe what we feel were the most interesting contributions.The full Proceedings of the 7th International Conference on Excitonic Processes in Condensed Matter (EXCON'06) shall be published in phys. stat. sol. (b) and phys. stat. sol. (c) in November 2006.

Powerful Radio Sources with Simbol-X: The Nucleus

NASA Astrophysics Data System (ADS)

Grandi, Paola

2009-05-01

The black holes in the hearts of bright elliptical galaxies are commonly observed to be associated with powerful relativistic jets. The mechanism by which material entering the accretion radius is converted into jet power remains the subject of much debate. At the same time, the interplay between the relativistic jet and the interstellar/intergalactic medium is the topic of intense discussions, being such knowledge essential for understanding the nature of the accretion process, galaxy formation and the growth of supermassive black holes. Simbol-X can play a fundamental role in addressing at least three important questions: I) the link between accretion and relativistic outflow at

Structural impact and crashworthiness. Volume 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morton, J.

1984-01-01

These papers here were given at a conference on materials testing. The topics covered are mathematical modelling of materials, impact tests on pipes, and drop tests on scale models of lead shielded containers for radioactive materials.

Metallic and Ceramic Material Development Research

DTIC Science & Technology

2010-05-01

Woodward and T.A. Parthasarathy, “Experiments and Three-Dimensional Dislocation Simulations of Microplasticity in Selected Materials,” IUTAM...Parthasarathy, “Experiments and Three-Dimensional Dislocation Simulations of Microplasticity in Selected Materials,” IUTAM Conference Proceedings

Resident Perspectives of an Interactive Case Review Following Independent Didactic Study as a Method of Teaching a Pediatric Imaging Curriculum.

PubMed

Rozenberg, Aleksandr; Dheer, Sachin; Nazarian, Levon N; Long, Suzanne S

The ABR has recently changed the format of the board examination, in which the oral examination was replaced by a computer based multiple-choice test. The purpose of this study was to determine resident's perceptions of a new conference resembling the new ABR format. Residents were requested to review a series of didactic pediatric imaging presentations prior to attending case conference. During conference, unknown cases reflecting the subject matter from the didactic presentations were presented along with multiple-choice questions. We then surveyed resident perspectives after each case conference. Between 14 and 18 residents were surveyed at the end of each subspecialty case review presentation. About 94% of resident respondents felt that the independent didactic study followed by an interactive case review session would better prepare them for the ABR certification exams, compared to didactic lectures alone. Furthermore, 95% of the respondents indicated that they preferred the independent didactic review followed by interactive case review versus didactic lecture alone. Most the respondents (85%) felt that combining independent didactic review with interactive unknown case sessions made the material more interesting and provided greater understanding of the material. There was no statistically significant difference in the distribution of answers across the subspecialty sessions (p > .05). Radiology residents favorably reviewed the combination of independent review of didactic material prior to interactive case review. Material presented in this fashion is felt to be more interesting and is thought to result in enhanced understanding of pediatric radiology material. Copyright © 2017 Elsevier Inc. All rights reserved.

The DuPont Conference: Implications for the Chemical Technology Curriculum

NASA Astrophysics Data System (ADS)

Kenkel, John; Rutledge, Sue; Kelter, Paul B.

1998-05-01

Southeast Community College (SCC) hosted the first DuPont Conference for Chemical Technology Education at its Lincoln, Nebraska campus October 4-6, 1997. The conference brought together fourteen practicing chemists and chemistry technicians and five college and university faculty members for the express purpose of suggesting new laboratory activities that would help relate the real world of work to the education of chemical laboratory technicians in community colleges. Participants included seven men and seven women from DuPont, Procter & Gamble, Eastman Chemical, Eastman Kodak, Dow Chemical, Air Products and Chemicals, Monsanto, Union Carbide, the Nebraska Agriculture Laboratory, and the University of Nebraska Biological Process Development Facility, Department of Food Science. The conference, sponsored by the E. I. DuPont DeNemours & Company through a grant awarded to SCC in June 1997, was intended to help further the goals of the two major projects underway at SCC, funded by the National Science Foundation's Advanced Technological Education Program. These projects, dubbed "Assignment: Chemical Technology I and II", or ACT-I and ACT-II, are curriculum and materials development projects. The invited scientists had between 2 and 32 years of experience that ranged from bench work to management levels. Many are or have been active on the national scene as members and officers of the American Chemical Society's Division of Chemical Technicians and the ACS Committee on Technician Activities.

PREFACE: International Conference on Quantum Simulators and Design, Hiroshima, Japan, 3 6 December 2006

NASA Astrophysics Data System (ADS)

Akai, Hisazumi; Oguchi, Tamio

2007-09-01

This special issue of Journal of Physics: Condensed Matter comprises selected papers from the 1st International Conference on Quantum Simulators and Design (QSD2006) held in Hiroshima, Japan, 3-6 December 2006. This conference was organized under the auspices of the Development of New Quantum Simulators and Quantum Design Grant-in-Aid for Scientific Research on Priority Areas, Ministry of Education, Culture, Sports, Science and Technology of Japan (MEXT), and Hiroshima University Quantum design is a computational approach to the development of new materials with specified properties and functionalities. The basic ingredient is the use of quantum simulations to design a material that meets a given specification of properties and functionalities. For this to be successful, the quantum simulation should be highly reliable and be applicable to systems of realistic size. A central interest is, therefore, the development of new methods of quantum simulation and quantum design. This includes methods beyond the local density approximation of density functional theory (LDA), order-N methods, methods dealing with excitations and reactions, and so on, as well as the application of these methods to the design of new materials and devices. The field of quantum design has developed rapidly in the past few years and this conference provides an international forum for experimental and theoretical researchers to exchange ideas. A total of 183 delegates from 8 countries participated in the conference. There were 18 invited talks, 16 oral presentations and 100 posters. There were many new ideas and we foresee dramatic progress in the coming years. The 2nd International Conference on Quantum Simulators and Design will be held in Tokyo, Japan, 31 May-3 June 2008.

Public Access to Digital Material; A Call to Researchers: Digital Libraries Need Collaboration across Disciplines; Greenstone: Open-Source Digital Library Software; Retrieval Issues for the Colorado Digitization Project's Heritage Database; Report on the 5th European Conference on Digital Libraries, ECDL 2001; Report on the First Joint Conference on Digital Libraries.

ERIC Educational Resources Information Center

Kahle, Brewster; Prelinger, Rick; Jackson, Mary E.; Boyack, Kevin W.; Wylie, Brian N.; Davidson, George S.; Witten, Ian H.; Bainbridge, David; Boddie, Stefan J.; Garrison, William A.; Cunningham, Sally Jo; Borgman, Christine L.; Hessel, Heather

2001-01-01

These six articles discuss various issues relating to digital libraries. Highlights include public access to digital materials; intellectual property concerns; the need for collaboration across disciplines; Greenstone software for construction and presentation of digital information collections; the Colorado Digitization Project; and conferences…

Proceedings of Conference on the Personnel Director in the Desegregation Process.

ERIC Educational Resources Information Center

Moody, Charles D., Ed.; And Others

The Program for Educational Opportunity, an institute based at the University of Michigan and established by the Office of Education pursuant to Title IV of the 1964 Civil Rights Act, is designed to assist school districts in the process of desegregation. The Program annually conducts a series of conferences. The Conference on The Personnel…

PREFACE: 13th International Conference on Electrorheological Fluids and Magnetorheological Suspensions (ERMR2012)

NASA Astrophysics Data System (ADS)

Unal, Halil Ibrahim

2013-02-01

Conference photograph The 13th International Conference on Electrorheological Fluids and Magnetorheological Suspensions (ERMR2012) was held in Ankara, Turkey at Gazi University in the Architect Kemaleddin historical hall on 2-6 July 2012. The first International Conference on Electrorheological Fluids and Magnetorheological Suspensions took place nearly 25 years ago and this conference continued the same tradition by providing an arena for researchers around the world to present their new research findings in these fields, and gave them the opportunity to learn about the latest research and technology and to renew their acquaintances. The meeting brought together scientists and engineers in multidisciplinary areas such as chemical engineering, mechanical engineering, materials science and engineering, physics, chemistry and polymer science and technology, to explore the state-of-art technology, identify key areas to be focused on and discuss their problems/issues. All oral presentations were held in a single session to enhance the interactions between the scientists and engineers. The ERMR2012 Conference included plenary lectures given by prominent leaders in their respective fields. About 130 participants from more than 50 organizations attended the conference and 15 plenary speeches, 64 oral presentations and 57 poster presentations took place in the following areas: (i) synthesis, characterization and processing of novel ER/MR materials, (ii) dynamics, chain and structure formation of ER/MR materials, (iii) ER/MR elastomers, ferrogels and their characterizations, (iv) rheological techniques and measurements of ER/MR materials, (v) modeling and simulations of ER/MR materials, (vi) device development and control techniques and (vii) applications of ER/MR materials. The ERMR2012 International Conference began with Turkish classical music performed by the musicians of the Ministry of Culture and Tourism. Rector Professor Dr R Ayhan welcomed the participants and the conference chair Professor H I Unal delivered an opening talk before the plenary lectures. Magnetorheological (MR) materials and their applications featured prominently at the ERMR2012 Conference. C A Evrensel from the University of Nevada, USA, opened the first session with a plenary speech on 'Magnetorheological Fluids for Cancer Therapy'. In the field of magnetorheological elastomers (MRE), S Odenbach from TU Dresden, Germany highlighted new developments in data management which enable single particle analysis and statistical analysis of the structures in an MRE in his plenary lecture. Another plenary lecture in the MRE field was given by F Gordaninejad (University of Nevada, USA) on new developments for integrated systems with thick MREs. D Barber (LORD Corporation, USA) gave details of the latest developments of LORD® MR fluids at extremes in his plenary speech. R Hidalgo Alvarez from the University of Granada, Spain, focused on particle shape effects in MR fluids in his plenary talk. D J Klingenberg (University of Wisconsin, USA) illustrated how the increased extent of layer formation increases the yield stress by increasing the stresses transmitted by both the magnetizable and nonmagnetizable spheres in his plenary lecture. S Smoukov from Cambridge University, UK, demonstrated magnetically responsive bi-stable hierarchical materials with novel functionality, which can be effectively used to design sustainable and energy-responsive systems. J de Vicente from the University of Granada, Spain, highlighted true yield stress in magnetorheology with the aid of simulations and experimental techniques for a wide range of MR fluids, inverse ferrofluids and ionic liquids-based MR fluids in his plenary speech. H Böse (Fraunhofer Institute, Germany) gave his plenary speech on magnetorheological torque transmission devices with permanent magnets. W Li (University of Wollongong, Australia), M Nakano (Tohoku University, Japan) and S Xuan (University of Science and Technology of China) gave plenary talks on novel MR shear thickening fluids, MR rubber composites and MR plastomers, respectively. H J Choi (INHA University, Korea), X Zhao (Northwestern Polytechnical University, China) and R Tao (Temple University, USA) delivered plenary lectures on issues relating to the area of electrorheological (ER) fluids. In their talks, Choi and Zhao covered novel ER materials with core-shell structured microspheres and micro/nano hierarchical structured titania particles, respectively, and Tao focused on the reduction of the viscosity of liquid suspensions for energy applications in transporting crude oil via pipelines. Attendance of the presentations was exceptionally high. Poster presentations were divided into two sessions and held in the afternoons after the close of the sessions, which were filled with stimulating discussions. The award for the best student research in the area of electrorheological fluids, sponsored by the Winslow family, was given to Y D Liu of INHA University, Korea on research entitled 'Copolyaniline coated monodisperse polystyrene microparticles and their electrorheological response'. The award for the best student research on magnetorheological suspensions, sponsored by the LORD Corporation, was given to S Kaneko of Keio University, Japan on research entitled 'Effect of a magnetic field on sloshing pressure in a magnetic fluid'. Besides the purely scientific program during the five days, some special events were also organized. A guided tour of the old city and some important landmarks of the capital city of Ankara were organized before the Gala Dinner. Special samples of Turkish classical music and folk dancing were performed by a group from the Republic of Turkey Ministry of Culture and Tourism to exhibit Turkish culture to the delegates at Gala Night, which was truly appreciated. Following the conclusion of this successful meeting, the next conference is expected to be organized at the University of Granada, Spain by Professor F Gonzalez-Caballero in 2014. It is expected that during the next conference, the interaction between polymer chemists synthesizing the new ER/MR materials, experimentalists from the rheological side characterizing their rheological properties, theoretical physicists describing the electric field and magnetic field dependent phenomena in ER/MR fluids rheology, and mechanical engineers conducting vibration damping tests will give rise to a deeper understanding of the ER/MR phenomena and will result in new findings in this field. The conference was sponsored by Gazi University, Anton-Paar GmbH, Kurimoto Ltd., Anamed Analitik Grup, TA Instruments, LORD Corporation, Turkish Powder Metallurgy Association (TTMD), LiKrom Ltd, Atomika Ltd., Turkish Patent Institute (TPI), Berkecan Ltd., Kurukahveci Mehmed Efendi Mahdumlari and Turkish Science-Research Foundation (TUBAV). The organizing committee truly appreciates the support from these organizations. Special appreciation is also due to my students O Erol and H C Gullu. I would also like to thank members of the Local Organizing Committee and International Advisory Board. Guest Editor H Ibrahim Unal Gazi University Science Faculty Chemistry Department 06500 Ankara/Turkey E-mail: hiunal@gazi.edu.tr

Quality information for quality use of medicines; 2nd International Conference, Kazan, 15-16 October 2010.

PubMed

Ziganshina, Lilia E; Menkes, David B; Herxheimer, Andrew

2011-01-01

Kazan hosted Russia's first international conference on medicines that was entirely independent of the pharmaceutical industry, attracting 414 participants from 9 countries and 20 regions of the Russian Federation. The meeting was greeted and endorsed by world leaders in pharmaceutical information, policy and regulation. Delegates discussed the professional and social problems arising from unethical drug promotion, including compromised evidence from clinical trials and consequent impairments in health service delivery. The Conference adopted a resolution prioritizing policy development and health system needs, notably including the development of clinical pharmacology. A website documents conference materials and provides an interface for future collaboration: http://evidenceupdate-tatarstan.ru/confer.

Editorial Conference Comments by the General Chair

NASA Astrophysics Data System (ADS)

Reed, Robert A.

2017-01-01

The 53rd IEEE Nuclear and Space Radiation Effects Conference (NSREC) was held July 11-15, 2016, at the Oregon Convention Center in Portland; the conference hotel was the Portland Doubletree. The NSREC is recognized as one of the premier international conferences on radiation effects in electronic materials, devices, and systems. The 2016 conference continued this tradition with a strong technical program, a one-day tutorial short course, radiation effects data workshop, industrial exhibit, and meetings for the IEEE Women in Engineering and Young Professionals organizations. The conference was sponsored by the Radiation Effects Committee of the IEEE Nuclear and Plasma Sciences Society (NPSS), and supported by Atmel, BAE Systems, Boeing, Cobham Semiconductor Solutions, Freebird Semiconductor, Honeywell, International Rectifier, Intersil Corporation, Jet Propulsion Laboratory, Northrop Grumman, Southwest Research Institute, and VPT Rad.

INTRODUCTION: The 8th International Conference on Vacuum Ultraviolet Radiation Physics

NASA Astrophysics Data System (ADS)

Nilsson, Per Olof; Hedin, Lars

1987-01-01

The VUV conferences series The international conferences on vacuum ultraviolet radiation physics started in 1962, and are now being held every third year. VUV-8 took place at Lund University, August 4-8, 1986. VUV-9 will be arranged at the University of Hawaii, USA, August 14-18, 1989, with Prof. C S Fadley as conference chairman. Chairman of the international advisory board for the period 1986-89 is Prof. L Hedin. The theme of the series can be summarized as experimental and theoretical progress in research fields utilizing the interaction of VUV radiation with matter. The topics cover broad areas within atomic and molecular physics, solid state physics and VUV instrumentation. The conferences emphasize interdisciplinary aspects. To these belong common experimental techniques as, e.g., synchrotron radiation instrumentation, and common theoretical foundations for the description of photon interactions with matter. The VUV-8 conference The VUV-8 conference in Lund was attended by 300 participants from 26 countries. An address list of the participants is given at the end of this volume. There were 33 invited papers given as plenary or key-note talks. As many as 229 posters were presented; 49 of them were also given orally. These numbers are typical for the VUV conferences, except for the number of posters, which was unusually large. In the conference planning the poster sessions were stressed, and particular care was taken to provide a good atmosphere at these sessions. Thus the posters were kept up during the whole conference, coffee was served in the hail with the posters and there were convenient places to sit down close to the posters. Considering the wide scope of the conference it was necessary to emphasize a limited number of topics of high current interest and importance. Thus besides traditional topics, several rapidly expanding fields were discussed in special sessions. At VUV-8 there were the following sessions. Theory of atoms and molecules photoabsorption and -ionization of atoms and molecules and related phenomena multiphoton and other dynamical processes plasma physics VUV lasers time resolved spectroscopy instrumentation for VUV radiation synchrotron radiation centres solid state spectroscopy dynamical processes involving localized levels fundamental aspects of photoemission spin-polarized photoemission inverse photoemission semiconductors organic materials adsorbates Proceedings of VUV-8 The present volume contains most of the invited papers (28 out of 33). Regarding the contributed papers, over 50 are now being published in regular issues of PHYSICA SCRIPTA. These papers will also appear in a reprint volume, PHYSICA SCRIPTA RS4, which soon will be available. Abstracts of invited and contributed papers appeared in three conference volumes as follows: Volume I: Atomic and molecular physics. Instrumentation. Volume II: Solid state physics. Volume III: Post deadline papers. These books have been registered in an international data base and can thus be cited as published documents. Copies may be received from the conference secretary.* Acknowledgements We would like to thank our sponsors, which are listed on the following page, the members of the international program committee, and all others who helped in the planning of the program. Above all we like to thank those who worked with the local organization. Due to their dedicated efforts the conference ran very smoothly with a pleasant atmosphere.

Super hydrophilic thin film nitinol demonstrates reduced platelet adhesion compared with commercially available endograft materials.

PubMed

Tulloch, Allan W; Chun, Youngjae; Levi, Daniel S; Mohanchandra, Kotekar P; Carman, Gregory P; Lawrence, Peter F; Rigberg, David A

2011-11-01

Thin film nitinol (TFN) is a novel material with which to cover stents for the treatment of a wide range of vascular disease processes. This study aimed to show that TFN, if treated to produce a super hydrophilic surface, significantly reduces platelet adhesion, potentially rendering covered stents more resistant to thrombosis compared to commercially available materials. TFN was fabricated using a sputter deposition process to produce a 5-μ thin film of uniform thickness. TFN then underwent a surface treatment process to create a super hydrophilic layer. Platelet adhesion studies compared surface treated TFN (S-TFN) to untreated TFN, polytetrafluoroethylene, Dacron, and bulk nitinol. In vivo swine studies examined the placement of an S-TFN covered stent in a 3.5 mm diameter external iliac artery. Angiography confirmed placement, and repeat angiography was performed at 2 wk followed by post mortem histopathology. S-TFN significantly reduced platelet adhesion without any evidence of aggregation compared with all materials studied (P < 0.05). Furthermore, in vivo swine studies demonstrated complete patency of the S-TFN covered stent at 2 wk. Post mortem histopathology showed rapid endothelialization of the S-TFN without excessive neointimal hyperplasia. These results demonstrate that S-TFN significantly reduces platelet adhesion and aggregation compared with commercially available endograft materials. Furthermore, the hydrophilic surface may confer thromboresistance in vivo, suggesting that S-TFN is a possible superior material for covering stents. Copyright © 2011 Elsevier Inc. All rights reserved.

Foreword: 18th Aps-Sccm and 24th Airapt

NASA Astrophysics Data System (ADS)

Collins, Gilbert; Moore, David S.; Yoo, Choong-Shik

2014-05-01

This second joint conference between the APS Topical Group on Shock Compression of Condensed Matter and the International Association for the Advancement of High Pressure Science and Technology (AIRAPT) demonstrates that static and dynamic compression of condensed matter continues to be a vibrant field of science and engineering. It is also by its nature an interdisciplinary field, incorporating chemistry, materials science, solid mechanics, plasma physics, and condensed matter physics, and utilizes theoretical, computational, and experimental tools. Recent years have brought about many advances in loading platforms, diagnostics, and computations that are leading to the emergence of many new avenues of research. These advances are also breathing new life into traditional topics such as equations of state, phase transformations, and chemistry at extreme conditions. The plenary lectures by Gennady Kanel, Karl Syassen, David Ceperley, Jon Eggert, Duck Young Kim, and Richard Kraus spanned the disciplines of static and dynamic high pressure physics and illustrated the breadth of the field. They also showed that interesting and important problems remain for researchers of the future to solve. The main guiding principal in the organization of this conference was to intertwine static and dynamical experimental alongside computational and theoretical studies of similar materials. To achieve this goal, we arranged the conference to include static, dynamic, and computational components in the same sessions, quite often taking presenters out of their comfort zone. The three special sessions on Deep Carbon Budget (organized by Giulia Galli and Rus Hemley), High Energy Density Materials (organized by Raymond Jeanloz and Jon Eggert), and Dynamic Response of Materials (organized by Yogendra Gupta and John Sarrao) furthered this guiding principal. We also endeavored to represent the breadth of static and dynamic high pressure science and technology, notably beyond that done at national laboratories. To this end, a significant fraction of the plenary, invited and contributed presentations showcased work done in academia, defense laboratories and industry, as well as internationally. Although travel distance and visa issues always present difficulties, the conference had strong representation from a record number of international participants, including sizable groups from Russia and China (thanks to Tony Zocher and Frank Cherne), as well as Japan, the United Kingdom, France, Canada, Germany, Israel, and Italy. It is our sincere hope that international interactions that occurred at the conference will lead to further collaborations in the future. Finally, we strived to increase student participation at the conference. Through the leadership of Scott Alexander and his committee, a new all-day student symposium was held the day before the main conference, with only student attendees and presenters, in order to acclimate the students to conference participation and help them network with their peers. In cooperation with the APS Topical Group and the AIRAPT and with additional support from DTRA and the AWE, the conference was able to provide financial assistance to a large number of students to attend the conference and present their research. This aid helped increase the number of student attendees significantly over previous conferences. Finally, the conference sponsored a networking lunch for students and representatives from a number of laboratories and other institutions, which was well attended. Seattle proved itself to be an excellent venue for the conference. The international flavor of the city provided ample dining options and numerous activity choices outside of the conference sessions. The major international airport made travel as easy as possible, as Seattle is a convenient central location for attendees from Europe and Asia. The conference was truly a team effort with critical contributions from many individuals. We deeply appreciate their contributions to the success of the conference and the publication of these proceedings. Gilbert (RIP) Collins David S Moore Choong-Shik Yoo

FinalReport-DOE BES DMSE-UNR-QLi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Qizhen

The primary goal of this project is to explore the fundamental deformation and failure mechanisms for magnesium with a hexagonal close packed (HCP) crystal structure. It is critical to perform this project for a number of reasons. First, magnesium is the lightest structural metal and its application in various structural components can save the final component weight. Second, the weight reduction from the usage of magnesium-based structural components in transportation vehicles such as automobiles and aircrafts can improve fuel efficiency and reduce the greenhouse gas emissions. Third, structural components often experience dynamic loading such as cyclic loading conditions. Fourth, magnesiummore » with a HCP crystal structure generally has its special deformation responses under loading conditions. This project investigated magnesium based materials (magnesium single crystal, pure polycrystalline magnesium, and some magnesium alloys) under various loading conditions, and also explored some processing routes to manipulate the microstructure and mechanical properties of magnesium. The research results were published in a number of articles and also disseminated through presentations in various conferences such as TMS annual meetings, MRS meetings, the international Plasticity conferences, the Pacific Rim International Congress on Advanced Materials and Processing, and AeroMat. In addition to the contribution to the research/academic community, this project is also beneficial to the general public. With the actual usage of magnesium in the passenger cars, the weight reduction and fuel consumption reduction will save the fuel bill of individual owners.« less

Radioactivity in consumer products

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moghissi, A.A.; Paras, P.; Carter, M.W.

1978-08-01

Papers presented at the conference dealt with regulations and standards; general and biological risks; radioluminous materials; mining, agricultural, and construction materials containing radioactivity; and various products containing radioactive sources.

Conference comments by the Editors

NASA Astrophysics Data System (ADS)

Zhao, Jing-Tai; Nikl, Martin; Williams, Richard T.; Auffray, Etiennette; Bizarri, Greg; Gu, Mu; Nagirnyi, Vitali; Pejchal, Jan; Sidletskiy, Oleg; Vedda, Anna

2014-02-01

The international community of researchers on fundamentals, development, and applications of inorganic scintillator materials has found the biennial meetings of the SCINT series to be an excellent chance to exchange data and ideas. These can range from very basic physical concepts and atomistic mechanisms in the materials under study up to truly application-minded tasks and problems defined by the modern needs for radiation detection, imaging, and spectroscopy of many kinds. The 12th International Conference on Inorganic Scintillators and their Applications (SCINT 2013) was organized by the Shanghai Institute of Ceramics, Chinese Academy of Sciences, in Shanghai, April 15-19, 2013. There were in total 180 scientific contributions, 85 oral presentations, 17 invited talks, and 95 poster exhibitions presented by 147 participants from 18 different countries. This special issue of the IEEE TRANSACTIONS ON NUCLEAR SCIENCE comprises the selected and refereed original works based on the SCINT 2013 presentations, altogether 51 papers. The conference was technically and financially co-sponsored by the Chinese Academy of Sciences, and Nuclear and Plasma Sciences Society (IEEE). The SCINT 2013 conference organizers acknowledge with deep thanks also the sponsorship and support of seven domestic and foreign industrial companies participating in the conference exhibition.

Losses, gain, and lasing in organic and perovskite active materials (Conference Presentation)

NASA Astrophysics Data System (ADS)

Pourdavoud, Neda; Riedl, Thomas J.

2016-09-01

Organic solid state lasers (OSLs) based on semiconducting polymers or small molecules have seen some significant progress over the past decade. Highly efficient organic gain materials combined with high-Q resonator geometries (distributed feedback (DFB), VCSEL, etc.) have enabled OSLs, optically pumped by simple inorganic laser diodes or even LEDs. However, some fundamental goals remain to be reached, like continuous wave (cw) operation and injection lasing. I will address various loss mechanisms related to accumulated triplet excitons or long-lived polarons that in combination with the particular photo-physics of organic gain media state the dominant road-blocks on the way to reach these goals. I will discuss the recent progress in fundamental understanding of these loss processes, which now provides a solid basis for modelling, e.g. of laser dynamics. Avenues to mitigate these fundamental loss mechanisms, e.g. by alternative materials will be presented. In this regard, a class of gain materials based on organo-lead halide perovskites re-entered the scene as light emitters, recently. Enjoying a tremendous lot of attention as active material for solution processed solar cells with a 20+% efficiency, they have recently unveiled their exciting photo-physics for lasing applications. Optically pumped lasing in these materials has been achieved. I will discuss some of the unique properties that render this class of materials a promising candidate to overcome some of the limitations of "classical" organic gain media.

URBAN DECISION MAKING - THE FINDINGS FROM A CONFERENCE (CHICAGO, NOVEMBER 5-12, 1965). APPLICATIONS OF HUMAN RELATIONS LABORATORY TRAINING, NUMBER 1, 1967.

ERIC Educational Resources Information Center

FRANKLIN, PAULA; FRANKLIN, RICHARD

THIS NATIONAL TRAINING LABORATORIES (NTL) CONFERENCE, DEPARTING SOMEWHAT FROM ITS USUAL EXPERIENCE-BASED LEARNING PROGRAMS, FOCUSED LABORATORY TRAINING METHODS ON THE DECISION-MAKING PROCESS IN URBAN COMMUNITY PROBLEM SOLVING. THE CONFERENCE PRESENTED THEORY, INFORMATION, AND OPINION ON THE NATURE OF CITIES AND THEIR DECISION-MAKING PROCESSES.…

Proceedings of the international conference on cybernetics and societ

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1985-01-01

This book presents the papers given at a conference on artificial intelligence, expert systems and knowledge bases. Topics considered at the conference included automating expert system development, modeling expert systems, causal maps, data covariances, robot vision, image processing, multiprocessors, parallel processing, VLSI structures, man-machine systems, human factors engineering, cognitive decision analysis, natural language, computerized control systems, and cybernetics.

EMERGING SCIENCE: EPA'S ORD SUPPORTS REGIONAL HAZE PROGRAM

EPA Science Inventory

A series of presentations from EPA's Board of Science Councilors review in April 2005 and the Science Forum in May 2005 are being made available to the Regional Planning Organization conference on June 9-10, 2005. Attendees will be able to review the materials during the confere...

European consensus conference on faecal microbiota transplantation in clinical practice

PubMed Central

Cammarota, Giovanni; Ianiro, Gianluca; Tilg, Herbert; Rajilić-Stojanović, Mirjana; Kump, Patrizia; Satokari, Reetta; Sokol, Harry; Arkkila, Perttu; Pintus, Cristina; Hart, Ailsa; Segal, Jonathan; Aloi, Marina; Masucci, Luca; Molinaro, Antonio; Scaldaferri, Franco; Gasbarrini, Giovanni; Lopez-Sanroman, Antonio; Link, Alexander; de Groot, Pieter; de Vos, Willem M; Högenauer, Christoph; Malfertheiner, Peter; Mattila, Eero; Milosavljević, Tomica; Nieuwdorp, Max; Sanguinetti, Maurizio; Simren, Magnus; Gasbarrini, Antonio

2017-01-01

Faecal microbiota transplantation (FMT) is an important therapeutic option for Clostridium difficile infection. Promising findings suggest that FMT may play a role also in the management of other disorders associated with the alteration of gut microbiota. Although the health community is assessing FMT with renewed interest and patients are becoming more aware, there are technical and logistical issues in establishing such a non-standardised treatment into the clinical practice with safety and proper governance. In view of this, an evidence-based recommendation is needed to drive the practical implementation of FMT. In this European Consensus Conference, 28 experts from 10 countries collaborated, in separate working groups and through an evidence-based process, to provide statements on the following key issues: FMT indications; donor selection; preparation of faecal material; clinical management and faecal delivery and basic requirements for implementing an FMT centre. Statements developed by each working group were evaluated and voted by all members, first through an electronic Delphi process, and then in a plenary consensus conference. The recommendations were released according to best available evidence, in order to act as guidance for physicians who plan to implement FMT, aiming at supporting the broad availability of the procedure, discussing other issues relevant to FMT and promoting future clinical research in the area of gut microbiota manipulation. This consensus report strongly recommends the implementation of FMT centres for the treatment of C. difficile infection as well as traces the guidelines of technicality, regulatory, administrative and laboratory requirements. PMID:28087657

Preface: 18th Aps-Sccm and 24th Airapt

NASA Astrophysics Data System (ADS)

Collins, Gilbert; Moore, David S.; Yoo, Choong-Shik; Buttler, William; Furlanetto, Michael; Evans, William

2014-05-01

The 18th Biennial International Conference of the APS Topical Group on Shock Compression of Condensed Matter in conjunction with the 24th Biennial International Conference of the International Association for the Advancement of High Pressure Science & Technology (AIRAPT) was held at the Westin Hotel in Seattle, Washington from 7-12 July, 2013. This is only the second time that these two organizations have held a Joint Conference — the first was 20 years previous (1993) in Colorado Springs, Colorado. Seattle was chosen for this joint conference because of its central location for the world-wide attendees as well as its metropolitan vibrancy. The scientific program consisted of 858 scheduled presentations organized into 23 topical areas and included contributed (537), invited (95), and plenary (6) lectures, as well as two poster sessions with 110 posters each. The scientific focus of the Joint Conference was on fundamental and applied research topics related to the static or dynamic compression of condensed matter. This multidisciplinary field of research encompasses areas of physics, chemistry, materials science, mechanics, geophysics and planetary physics, and applied mathematics. Experimental, computational and theoretical studies all play important roles. The organizers endeavored to intertwine static and dynamic experimental alongside computational and theoretical studies of similar materials in the organization of the sessions. This goal was aided by the addition of three special focus sessions on deep carbon budget, high energy density materials, and dynamic response of materials. 722 scientists and engineers from 25 countries registered at the conference, including 132 students from 12 countries. The attendee countries represented included: Argentina (2), Australia (2), Brazil (3), Canada (25), China (22), Czech Republic (2), France (35), Germany (19), India (6), Israel (21), Italy (10), Japan (49), Netherlands (1), Poland (1), Portugal (2), Russia (26), Singapore (1), Slovakia (1), South Korea (5), Spain (7), Sweden (4), Switzerland (1), United Kingdom (69), United States of America (402). 79 of the students were supported by travel awards, funded in part by the APS Topical Group, the AIRAPT, and other sources. New for this conference was an expanded Student Program, including an all-day Student, Post-Doc, and Early Career Symposium held on Sunday 7 July . During the Conference, Gennady Kanel of the Institute for High Temperatures, Russian Academy of Sciences, was presented the 2013 George E Duval Shock Compression Science Award, and gave a plenary lecture ''Unusual behavior of usual materials in shock waves.'' Similarly, Karl Syassen of the Max Planck Institute Stuttgart received the 2013 Percy Bridgman Award at the conference, and presented a plenary lecture ''Stressed solids probed by diffraction and spectroscopy.'' In addition, there were two young investigator awards presented. First was the AIRAPT Jamieson Award, presented to Duck Young Kim of the Geophysical Laboratory, Carnegie Institution of Washington, DC. The other was a new APS SCCM Topical Group Student Award, presented to Rick Kraus of Harvard University. The two awardees shared a plenary talk slot on 8 July, with Duck Young Kim presenting ''Novel materials prediction and experimental synthesis under pressure'' and Rick Kraus ''Thermodynamic paths in planetary collisions: Shock vaporization of SiO2, MgO, and Fe.'' Details of the committees are available in the PDF

Making Conferences Human Places of Learning

ERIC Educational Resources Information Center

Kenny, Michael

2014-01-01

Open Space Technology is a cumbersome name for a participative conference model that enables dynamic inclusive engagement and challenges traditional, highly structured hierarchical conference formats. Based on self-organising systems, (Wenger, 1998) Open Space Technology conferences have an open process, start with no agenda and empower the most…

PREFACE: Seventh International Conference on Dissociative Recombination: Theory, Experiments and Applications

NASA Astrophysics Data System (ADS)

van der Zande, Wim J.

2009-09-01

Dissociative Recombination is one of the outcomes of collisions between electrons and molecular ions. This reaction dominates many plasmas, dense as well as dilute. Therefore, knowledge about this reaction is highly relevant for astrophysics, atmospheric sciences, (non-)reactive plasmas, and fusion plasmas. A theoretical description of this process requires intensive ab initio quantum chemistry calculations as well as a detailed description of the electron collision process. The high density of states near the ionization energy of molecules renders calculations extremely difficult and complex. In experiments, both discharge and flowing afterglow experiments and fast beam and ion storage ring experiments, a steady development can be seen towards more detailed studies often at the quantum state resolved level including product internal state identification and very recently detailed vector properties such as fragment angular distributions. Thanks to an efficient interplay between experiment and theory dissociative recombination has progressed significantly over the last few years. The Seventh International Conference on Dissociative Recombination: Theory, Experiments, and Applications (DR2007) was organized by the Institute of Molecules and Materials at the Radboud University Nijmegen, The Netherlands and was held on the Wadden Island of Ameland. Earlier conferences in this series were held at Lake Louise, Alberta, Canada (1988), Saint Jacut, Bretagne, France (1992), Ein Gedi, Israel (1995), Nässlingen, Stockholm Archipelago, Sweden (1999), Chicago, USA, as part of the American Chemical Society meeting (2001), and in Mosbach, Germany (2004). Ameland and the Resort d'Amelander Kaap was chosen in the spirit of previous dissociative recombination conferences. It turned out to be a venue where discussions about dissociative recombination could take place around the clock both inside and outside while walking through dunes and on the beach. The conference was made possible by generous sponsors, whom we thank wholeheartedly: The Radboud University Nijmegen, The Institute for Molecules and Materials of the Radboud University Nijmegen, The Foundation for Fundamental Research on Matter (Stichting FOM), The Foundation PHYSICA (Stichting Physica), and The Netherlands Royal Academy of Sciences (KNAW). The organisational support by Erna Gouwens van Oss before and during the conference was essential for its success. The help of Thanja Lambrechts and Vitali Zhaunerchyk during the preparation of the proceedings is greatly appreciated. The delay in the publication of these proceedings is entirely caused by the editor. The authors of the contributions are thanked for the quality of their contributions, Wim J van der Zande, Editor Institute for Molecules and Materials, Radboud University Nijmegen, PO Box 9010, NL-6500 GL Nijmegen, The Netherlands Email: w.vanderzande@science.ru.nl Conference photograph Participants of the 7th International Conference on Dissociative Recombination: Theory, Experiments and Applications, taken in front of d'Amelander Kaap, the conference venue in Ameland, one of the Wadden Islands in the North of the Netherlands. 1. Dror Shafir21. Annemieke Petrignani41. Oumanou Motopan 2. Ioan Scheider22. Johanna Roos42. Max Berg 3. Nigel Adams23. Erna Gouwens van Oss43. Henrik Buhr 4. Hajime Tanuma24. Natalie de Ruette44. Ilya Fabrikant 5. Jonathan Tennyson25. Francois Wameu Tamo45. Claude Krantz 6. Vitali Zhaunerchyk26. Rainer Johnsen46. Michael Stenrup 7. Robert Continetti27. Viatcheslav Kokoouline47. Xavier Urbain 8. Stefan Rosén28. Hidekazu Takagi48. Evelyne Roueff 9. Erik Vigren29. Hans-Jakob Wörner49. Dirk Schwalm 10. Magdalena Kaminska30. Oskar Asvany50. Valery Ngassam 11. Chris Greene31. Lutz Lammich51. Julien Lecointre 12. Steffen Novotny32. Brandon Jordon-Thaden52. Ann Orel 13. Amy Schumak33. Wolf Diettrich Geppert53. Ihor Korolov 14. Gerard van Rooij34. Alexander Faure54. Romain Guerot 15. Wim van der Zande35. Mathias Hamberg55. Peet Hickman 16. Daan Schram36. Oldrich Novotny56. Christiaan Jungen 17. Dahbia Talbi37. Matthias Danielson57. Jozef Varju 18. Steven Guberman38. Radek Plasil58. Juraj Glosik 19. Mats Larsson39. Richard Thomas 20. Åsa Larson40. Andreas Wolf Absent from the picture: Detlev Reiter, Brian Mitchell, Jens Hoffmann and Dave Parker

Hydrogen and the materials of a sustainable energy future

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zalbowitz, M.

1997-02-01

The National Educator`s Workshop (NEW): Update 96 was held October 27--30, 1996, and was hosted by Los Alamos National Laboratory. This was the 11th annual conference aimed at improving the teaching of material science, engineering and technology by updating educators and providing laboratory experiments on emerging technology for teaching fundamental and newly evolving materials concepts. The Hydrogen Education Outreach Activity at Los Alamos National Laboratory organized a special conference theme: Hydrogen and the Materials of a Sustainable Energy Future. The hydrogen component of the NEW:Update 96 offered the opportunity for educators to have direct communication with scientists in laboratory settings,more » develop mentor relationship with laboratory staff, and bring leading edge materials/technologies into the classroom to upgrade educational curricula. Lack of public education and understanding about hydrogen is a major barrier for initial implementation of hydrogen energy technologies and is an important prerequisite for acceptance of hydrogen outside the scientific/technical research communities. The following materials contain the papers and view graphs from the conference presentations. In addition, supplemental reference articles are also included: a general overview of hydrogen and an article on handling hydrogen safely. A resource list containing a curriculum outline, bibliography, Internet resources, and a list of periodicals often publishing relevant research articles can be found in the last section.« less

HBCUs Research Conference Agenda and Abstracts

NASA Technical Reports Server (NTRS)

Dutta, Sunil (Compiler)

1997-01-01

The purpose of this Historically Black Colleges and Universities (HBCUS) Research Conference was to provide an opportunity for principal investigators and their students to present research progress reports. The abstracts included in this report indicate the range and quality of research topics such as aeropropulsion, space propulsion, space power, fluid dynamics, designs, structures and materials being funded through grants from Lewis Research Center to HBCUS. The conference generated extensive networking between students, principal investigators, Lewis technical monitors, and other Lewis researchers.

HBCUs Research Conference Agenda and Abstracts

NASA Technical Reports Server (NTRS)

Dutta, Sunil (Compiler)

1998-01-01

The purpose of this Historically Black Colleges and Universities (HBCUs) Research Conference was to provide an opportunity for principal investigators and their students to present research progress reports. The abstracts included in this report indicate the range and quality of research topics such as aeropropulsion, space propulsion, space power, fluid dynamics, designs, structures and materials being funded through grants from Lewis Research Center to HBCUs. The conference generated extensive networking between students, principal investigators, Lewis technical monitors, and other Lewis researchers.

HBCUs Research Conference agenda and abstracts

NASA Technical Reports Server (NTRS)

Dutta, Sunil (Compiler)

1995-01-01

The purpose of this Historically Black Colleges and Universities (HBCUs) Research conference was to provide an opportunity for principal investigators and their students to present research progress reports. The abstracts included in this report indicate the range and quality of research topics such as aeropropulsion, space propulsion, space power, fluid dynamics, designs, structures and materials being funded through grants from Lewis Research Center to HBCUs. The conference generated extensive networking between students, principal investigators, Lewis technical monitors, and other Lewis researchers.

Environmental Education, The Last Measure of Man. An Anthology of Papers for the Consideration of the 14th and 15th Conference of the U.S. National Commission for UNESCO.

ERIC Educational Resources Information Center

Kohn, Raymond F.

An anthology of papers for consideration by delegates to the 14th and 15th conferences of the United States National Commission for UNESCO are presented in this book. As a wide-ranging collection of ideas, it is intended to serve as background materials for the conference theme - our responsibility for preserving and defending a human environment…

Abstracts for the Planetary Geology Field Conference on Aeolian Processes

NASA Technical Reports Server (NTRS)

Greeley, R. (Editor); Black, D. (Editor)

1978-01-01

The Planetary Geology Field Conference on Aeolian Processes was organized at the request of the Planetary Geology Program office of the National Aeronautics and Space Administration to bring together geologists working on aeolian problems on earth and planetologists concerned with similar problems on the planets. Abstracts of papers presented at the conference are arranged herein by alphabetical order of the senior author. Papers fall into three broad categories: (1) Viking Orbiter and Viking Lander results on aeolian processes and/or landforms on Mars, (2) laboratory results on studies of aeolian processes, and (3) photogeology and field studies of aeolian processes on Earth.

Studies on Tribological Behavior of Aluminum Nitride-Coated Steel

NASA Astrophysics Data System (ADS)

Ionescu, G. C.; Nae, I.; Ripeanu, R. G.; Dinita, A.; Stan, G.

2017-02-01

The new opportunities introduced by the large development of the IoT (internet of things) are increasing the demand for sensors to be located as close as possible to the supervised process. The Aluminum Nitride (AIN) is one of the most promising materials for sensors due to its piezoelectric, excellent mechanical properties, chemical inertness and high melting point. Due to these material properties, the AlN sensors are suitable to operate in high temperature and harsh environment conditions and therefore are very promising to be employed in industrial applications. In this article are presented the studies conducted on several Aluminum Nitride-Coated Steel structures with the goal of producing sensors embedded in the ball bearings, bearings and other mobile parts of machine tools. The experiments were conducted on simple coatings structures without lubricating materials and the obtained results are promising, demonstrating that, with some limitations the AIN could be used in such applications. This paper was accepted for publication in Proceedings after double peer reviewing process but was not presented at the Conference ROTRIB’16

Reciprocal Elucidation: A Student-Led Pedagogy in Multidisciplinary Undergraduate Research Conferences

ERIC Educational Resources Information Center

Walkington, Helen; Hill, Jennifer; Kneale, Pauline E.

2017-01-01

There is no previous study of the benefits of attending a national multidisciplinary conference dedicated to undergraduate researchers, despite the growing number of such conferences internationally. This paper addresses the gap in knowledge of the learning gains from these conferences, and reveals a student driven learning process, a…

A Learner-Centred Mock Conference Model for Undergraduate Teaching

ERIC Educational Resources Information Center

Kumar, Kari

2011-01-01

This essay describes a mock conference model of instruction suitable for use in undergraduate teaching, and which adheres to principles of learner-centred instruction and universal design for learning. A staged process of learner preparation for the conference is outlined, and student and instructor roles during preconference, conference, and…

The Press Conferences of Eleanor Roosevelt.

ERIC Educational Resources Information Center

Beasley, Maurine H.

Newly discovered transcriptions of 87 of First Lady Eleanor Roosevelt's women-only press conferences held from 1933 to 1945 make possible an examination of the objectives, topics, and value of these conferences. By holding the conferences, Mrs. Roosevelt attributed to women an important function in the political communication process, and at the…

So, You Want To Host an Online Conference....

ERIC Educational Resources Information Center

Boak, Cathy; Blackburn, Jean

This guide is intended for individuals and organizations interested in hosting online conferences. For the purposes of this guide, a host is the administrator or manager of a conferencing system and of the conferences held on that system. Eight sections cover the following important processes for hosting online conferences: (1) determining…

Captured Knowledge: Presentations and Notes of the KMWorld Conference and Exposition (4th, Santa Clara, California, September 13-15, 2000).

ERIC Educational Resources Information Center

Jones, Rebecca, Ed.; Nixon, Carol, Comp.; Burmood, Jennifer, Comp.

This publication contains presentations, notes, and illustrative materials used in the annual KMWorld Conference and Exposition, "Knowledge Nets: Defining and Driving the E-Enterprise." Presentations include: "Knowledge Management Applied to the Manufacturing Enterprise" (Matthew Artibee); "Ryder Knowledge Center: Building…

Supporting Student Presentations and Participation at Professional Conferences

ERIC Educational Resources Information Center

McGuire, Margaret A.; Simpson, Cynthia; Duke, Lindsay Nicole

2009-01-01

Mentoring early childhood education students who are preparing to attend and make presentations at a conference can be rewarding for all involved. Often, students present current research they have conducted or share specific expertise in areas such as lesson planning, learning materials, or fund-raising. Successful mentoring, leading to…

InfoToday 2002 Collected Presentations (New York, New York, May 14-16, 2002).

ERIC Educational Resources Information Center

Nixon, Carol, Comp.; Burmood, Jennifer, Comp.

This volume contains collected presentations (papers, outlines, and visual materials) from InfoToday 2002, the Global Conference & Exhibition on Electronic Information and Knowledge Management, featuring three core conferences for information professionals and knowledge managers: NationalOnline 2002, KnowledgeNets 2002, and E-Libraries 2002.…

The Third Annual Learning Resources Conference Proceedings.

ERIC Educational Resources Information Center

Moore, Caroline, Ed.; Piercy, David R., Ed.

Presented are the proceedings of the Third Annual Learning Resources Conference which deal with current directions in educational services for the severely handicapped. The papers are divided into three topical areas, the authors' names and addresses are supplied, and support material relating to some of the papers and a resource guide are…

78 FR 34035 - Forest Resource Coordinating Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-06

... morning of each conference call. Written comments may be submited by mail to Attn: Maya Solomon, 1400... Maya Solomon via phone at 202-205-1376 or via email at [email protected] prior to the conference call to facilitate distribution of support materials. FOR FURTHER INFORMATION CONTACT: Maya Solomon...

47 CFR 1.248 - Prehearing conferences; hearing conferences.

Code of Federal Regulations, 2012 CFR

2012-10-01

... phases of the proceeding to be submitted in writing, the dates for the exchange of the written material... the advisability of reducing any or all phases of their affirmative direct cases to written form. (2) In hearings involving applications for new, improved and changed facilities and in comparative...

47 CFR 1.248 - Prehearing conferences; hearing conferences.

Code of Federal Regulations, 2014 CFR

2014-10-01

... phases of the proceeding to be submitted in writing, the dates for the exchange of the written material... the advisability of reducing any or all phases of their affirmative direct cases to written form. (2) In hearings involving applications for new, improved and changed facilities and in comparative...

47 CFR 1.248 - Prehearing conferences; hearing conferences.

Code of Federal Regulations, 2011 CFR

2011-10-01

... phases of the proceeding to be submitted in writing, the dates for the exchange of the written material... the advisability of reducing any or all phases of their affirmative direct cases to written form. (2) In hearings involving applications for new, improved and changed facilities and in comparative...

47 CFR 1.248 - Prehearing conferences; hearing conferences.

Code of Federal Regulations, 2013 CFR

2013-10-01

... phases of the proceeding to be submitted in writing, the dates for the exchange of the written material... the advisability of reducing any or all phases of their affirmative direct cases to written form. (2) In hearings involving applications for new, improved and changed facilities and in comparative...

Exceptional Children Conference Papers: Behavioral and Emotional Problems.

ERIC Educational Resources Information Center

Council for Exceptional Children, Arlington, VA.

Four of the seven conference papers treating behavioral and emotional problems concern the Conceptual Project, an attempt to provide definition and evaluation of conceptual models of the various theories of emotional disturbance and their basic assumptions, and to provide training packages based on these materials. The project is described in…

Technology 2003: The Fourth National Technology Transfer Conference and Exposition, volume 1

NASA Technical Reports Server (NTRS)

Hackett, Michael (Compiler)

1994-01-01

Proceedings from symposia of the Technology 2003 Conference and Exposition, December 7-9, 1993, Anaheim, CA, was discussed. Volume 1 features the Plenary Session and the Plenary Workshop, plus papers presented in Advanced Manufacturing, Biotechnology/Medical Technology, Environmental Technology, Materials Science, and Power and Energy.

Kardex Quadrangle Overlays - www.arlis.org

Science.gov Websites

Wild & Scenic Rivers About Contacts Partner Libraries Policies Administrative Records Challenged Records Challenged Materials Circulation Code of Conduct Conference Room Conference Room Form Internet Use /AK/AE-03/003. This page links to records in jpg graphics format. The images in this collection are

PREFACE Surface Modifications and Functionalization of Materials for Biomedical Applications

NASA Astrophysics Data System (ADS)

Endrino, Jose Luis; Puértolas, Jose A.; Albella, Jose M.

2010-11-01

Conference photograph This special issue contains selected papers which were presented as invited and contributed communications at the workshop entitled 'Surface modification and functionalization of materials for biomedical applications' (BIO-COAT 2010) which was held on 24 June 2010 in Zaragoza (Spain). The surface of a material plays a major role in its interaction with the biological medium. Processes related to the mechanical stability of articular devices in contact, osseointegration, thrombogenicity, corrosion and leaching, or the inflammatory response of rejection of a material, are clearly conditioned by the surface properties. Therefore, the modification or functionalization of surfaces can have an important impact on these issues. New techniques for functionalization by thin film deposition or surface treatments help to improve superficial properties, while understanding the interaction of the surface-biological medium is critical for their application in new devices. Jointly organized by the Spanish Materials Research Society, BIO-COAT 2010 provided an open forum to discuss the progress and latest developments in thin film processing and the engineering of biomaterials. Invited lectures were particularly aimed at providing overviews on scientific topics and were given by recognized world-class scientists. Two of them have contributed with a proceedings article to this selected collection (articles 012001 and 012008). The contributed communications were focused on particular cutting-edge aspects of thin film science and functionalization technologies for biomaterials, showing the major scientific push of Spanish research groups in the field. The 2010 BIO-COAT conference was organized along four main topics: (1) functionalization and texture on surfaces, (2) tribology and corrosion, (3) the surface modification of biomaterials, and (4) surface-biological environment interactions. The papers published in this volume were accepted for publication after peer-review as are regular papers. The editor of this proceedings volume gratefully acknowledges all referees for their valuable work, sometimes working to quite short deadlines. Finally, BIO-COAT 2010 would not have been successful without the strong involvement and input of the local organizing committee in Zaragoza, and the support of the University of Zaragoza. We sincerely thank them all for their efforts. Jose L Endrino (Editor) Jose A Puértolas (Chairman) Jose M Albella (Chairman)

Super and parallel computers and their impact on civil engineering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kamat, M.P.

1986-01-01

This book presents the papers given at a conference on the use of supercomputers in civil engineering. Topics considered at the conference included solving nonlinear equations on a hypercube, a custom architectured parallel processing system, distributed data processing, algorithms, computer architecture, parallel processing, vector processing, computerized simulation, and cost benefit analysis.

PREFACE: 8th Ibero-American Congress on Sensors (IBERSENSOR 2012)

NASA Astrophysics Data System (ADS)

Ramos, Idalia; Santiago-Avilés, Jorge J.

2013-03-01

The 8th Ibero-American Congress on Sensors (IBERSENSOR 2012) was held in Carolina, Puerto Rico on 16-19 October 2012. IBERSENSOR is a forum of the Spanish and Portuguese speaking scientific community, working in the fields of sensors of every possible kind and their applications. Previous conferences in the series were successfully carried out in La Habana, Cuba (1998); Buenos Aires, Argentina (2000); Lima, Perú (2002); Puebla, México (2004); Montevideo, Uruguay (2006); Sao Paulo, Brasil (2008) and Lisboa, Portugal (2010). IBERSENSOR 2012 participants included researchers from eleven countries in the Americas and Europe, in particular young men and women. The conference was organized and sponsored by the Partnership for Research and Education in Materials (NSF-DMR-0934195) a collaborative program between the University of Puerto Rico at Humacao (UPRH) and the University of Pennsylvania (PENN) Materials Research Science and Engineering Center, sponsored by the USA National Science Foundation (NSF). Other sponsors included the Center for Advanced Nanoscale Materials of the University of Puerto Rico at Río Piedras and the Nano/Bio Interface Center (NBIC) at PENN. The Proceedings of IBERSENSOR 2012 include a selection of 21 research papers in the areas of Materials and Processes for Sensor Development, Nano-Sensors, Chemical Sensors, Mechanical Sensors, Optical Sensors, Wireless Sensors, Sensor signal conditioning and Instrumentation, Microfluidic Devices, and Biomedical and Environmental Applications. Editors Idalia Ramos University of Puerto Rico at Humacao, Puerto Rico Jorge J Santiago-Avilés University of Pennsylvania, USA Group photograph Logos Ibero-American Congress on Sensors Ibero-American Congress on Sensors (Ibersensor) Main Sponsors PENN-UPRH-PREM Partnership for Research and Education in Materials (PENN-UPRH-PREM) University of Puerto Rico at Humacao USA National Science Foundation USA National Science Foundation Other Sponsors Center for Advanced Nanoscale Materials Center for Advanced Nanoscale Materials (CNM), University of Puerto Rico, Río Piedras Nano/Bio Interface Center Nano/Bio Interface Center, University of Pennsylvania

Combined ground-based and satellite remote sensing of atmospheric aerosol and Earth surface in the Antarctic

NASA Astrophysics Data System (ADS)

Chaikovsky, Anatoli; Korol, Michail; Malinka, A.; Zege, E.; Katsev, I.; Prikhach, A.; Denisov, S.; Dick, V.; Goloub, P.; Blarel, L.; Chaikovskaya, L.; Lapyonok, A.; Podvin, T.; Denishchik-Nelubina, N.; Fedarenka, A.; Svidinsky, V.

2016-01-01

The paper presents lecture materials given at the Nineteenth International Conference and School on Quantum Electronics "Laser Physics and Applications" (19th ICSQE) in 2016, Sozopol, Bulgaria and contains the results of the 10-year research of Belarusian Antarctic expeditions to study the atmospheric aerosol and Earth surface in Antarctica. The works focus on the studying variability and trends of aerosol, cloud and snow characteristics in the Antarctic and the links of these processes with the long range transport of atmospheric pollutants and climate changes.

Proceedings of the Air Force High Energy Density Materials Contractors Conference (2nd) Held in Newport Beach, CA, on 28 Feb-2 Mar 1988

DTIC Science & Technology

1988-05-27

expansion process is currently under investigation. 7 REFERENCES 1 . A. P. Marchand. " Synthesis and Chemistry of Novel Polynitropolycylic Cage...for example is 0.12 ± 0.01 for formation of 1 - chloropropane and 2- chloropropane from an equimolar mixture of propane and chlorine. Although the...that the product branching ratio (2-chloropropane:l- chloropropane ) is 5.6: 1 . When corrected for the fact that propane contains only one third as many

Energetic Materials - Technology, Manufacturing and Processing, 27th International Annual Conference of ICT June 25 - June 28, 1996 Karisruhe, Federal Republic of Germany.

DTIC Science & Technology

1997-02-01

PROPELLANTS WITH VARYING COMPOSITION L.F. Dimaranan, I. Lee, F.E. Hudson III V12 A COMBUSTION MODEL FOR AN/HTPB-IPDI COMPOSITE SOLID PROPELLANTS P... COMPOSITE PROPELLANTS WITH A LOW PRESSURE EXPONENT SUITABLE FOR NOZZLELESS BOOSTER MOTORS G.J. van Zyl V21 PROPERTIES OF AN AND PSAN/GAP-PROPELLANTS K...APPLICATION B.N. Kondrikov SENSITIVITY TO PROJECTILE IMPACT OF PRE-HEATED EXPLOSIVE COMPOSITIONS H.Cherin, D. Lemoine, L. Gautier VULNERABILITY TESTING OF

International Conference on Infrared and Millimeter Waves, 15th, Orlando, FL, Dec. 10-14, 1990, Conference Digest

NASA Astrophysics Data System (ADS)

Temkin, Richard J.

Recent advances in IR and mm-wave (MMW) technology and applications are discussed in reviews and reports. Sections are devoted to MMW sources, high-Tc superconductors, atmospheric physics, FEL technology, astronomical instrumentation, MMW systems, measurement techniques, MMW guides, and MMW detectors and mixers. Also discussed are material properties, gyrotrons, guided propagation, semiconductors, submm detectors and devices, material characterization methods, ICs, MMW guides and plasma diagnostics, lasers, and MMW antennas. Diagrams, drawings, graphs, photographs, and tables of numerical data are provided.

14th High-Tech Plasma Processes Conference (HTPP 14)

NASA Astrophysics Data System (ADS)

2017-04-01

Preface The High-Tech Plasma Processes Conference (HTPP) is a bi-annual international conference based in Europe with topics encompassing the whole area of plasma processing science. This conference is open to all the international community in the world involved in plasma science and plasma technology. The aim of the conference is to bring different scientific communities together, facilitate the contacts between science, technology and industry and provide a platform for the exploration of both fundamental topics and new applications of plasmas. For this edition of HTPP, as was the case for the last, we have achieved a well balanced participation from the communities of both thermal and non-thermal plasma researchers. 75 people from 17 countries attended the conference with the total number of contributions being 74, consisting of 19 invited talks and 55 poster contributions. As a HTPP tradition a poster competition has been carried out during the conference. The winner of the poster competition was Fabrice Mavier from Université de Limoges, France with his paper “Pulsed arc plasma jet synchronized with drop-on-demand dispenser” All the participants also ejoyed the social program including an “unconventional” tour of the city, the visit to the famous Hofbräuhaus and the dinner at the Blutenburg, a beautiful inner-city castle. We have received papers corresponding to the contributions of HTPP-2014 that have been submitted for publication in this volume of Journal of Physics: Conference Series. Each submitted contribution has been peer reviewed and the Editors are very grateful to the referees for their careful support in improving the original manuscripts. In total, 18 manuscripts have been accepted for publication covering a range of topics of plasma processing science from plasma fundamentals to process applications through to experiments, diagnostics and modelling. We deeply thank the authors for their enthusiastic and high-grade contributions and we are convinced that this volume of Journal of Physics: Conference Series will be interesting for our community. Finally, we would like to thank the conference chairmen, the members of the steering committee, the international scientific committee, the local organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of HTPP-2016. The Editors of the HTPP-2016 Proceedings Dr. Dirk Uhrlandt, head of the ISC Prof. Philippe Teulet Prof. Jochen Schein Neubiberg, 6th of March 2017

United European Gastroenterology Week (UEGW) 2017 - 25th Annual Conference (October 28-November 1, 2017 - Barcelona, Spain).

PubMed

Torramadé, E

2017-11-01

The 25th United European Gastroenterology Week (UEGW), the largest European conference centered on diseases of the stomach, bowel, esophagus, liver, pancreas and gallbladder, was held in Barcelona, Spain. This 5-day meeting attracted over 13,000 delegates to share recent research in the treatment of gastrointestinal and liver diseases. The conference provided teaching material, workshops and live sessions to all the attendants. The reports will cover the latest research into treatments for these diseases.

HBCUs/OMUs Research Conference Agenda and Abstracts

NASA Technical Reports Server (NTRS)

Dutta, Sunil (Compiler)

2000-01-01

The purpose of this Historically Black Colleges and Universities (HBCUs) Research Conference was to provide an opportunity for principal investigators and their students to present research progress reports. The Abstracts included in this report indicate the range and quality of research topics such as aeropropulsion, space propulsion, space power, fluid dynamics, designs, structures and materials being funded through grants from Glenn Research Center to HBCUs. The conference generated extensive networking between students, principal investigators, Glenn technical monitors, and other Glenn researchers.

HBCUs/OMUs Research Conference Agenda and Abstracts

NASA Technical Reports Server (NTRS)

Dutta, Sunil (Compiler)

2003-01-01

The purpose of this Historically Black Colleges and Universities (HBCUs/OMUs) Research Conference was to provide an opportunity for principal investigators and their students to present research progress reports. The abstracts included in this report indicate the range and quality of research topics such as aeropropulsion, space propulsion, space power, fluid dynamics, designs, structures and materials being funded through grants from Glenn Research Center to HBCUs. The conference generated extensive networking between students, principal investigators, Glenn technical monitors, and other Glenn researchers.

HBCUs/OMUs Research Conference Agenda and Abstracts

NASA Technical Reports Server (NTRS)

Dutta, Sunil (Compiler)

2001-01-01

The purpose of this Historically Black Colleges and Universities (HBCUs) Research Conference was to provide an opportunity for principal investigators and their students to present research progress reports. The abstracts included in this report indicate the range and quality of research topics such as aeropropulsion, space propulsion, space power, fluid dynamics, designs, structures and materials being funded through grants from Glenn Research Center to HBCUs. The conference generated extensive networking between students, principal investigators, Glenn technical monitors, and other Glenn researchers.

Mechanics of Textile Composites Conference

NASA Technical Reports Server (NTRS)

Poe, Clarence C. (Editor); Harris, Charles E. (Editor)

1995-01-01

This document is a compilation of papers presented at the Mechanics of Textile Composites Conference in Hampton, Virginia, December 6-8, 1994. This conference was the culmination of a 3-year program that was initiated by NASA late in 1990 to develop mechanics of textile composites in support of the NASA Advance Composites Technology Program (ACT). The goal of the program was to develop mathematical models of textile preform materials and test methods to facilitate structural analysis and design. Participants in the program were from NASA, academia, and industry.

National Conference on the Development of Statewide Preservation Programs. Report of a Conference on the Current Status and Future Directions of Statewide Programs for the Preservation of Our Intellectual Heritage (Washington, D.C., March 1-3, 1989).

ERIC Educational Resources Information Center

Morrow, Carolyn Clark, Ed.

This report presents some of the prominent features of a national invitational conference whose goal was to provide a national forum to discuss ongoing preservation efforts in individual states; describe the preservation challenge faced by all states in common; review the kinds of materials at risk; and alert administrators to the opportunities…

Mcare 2017

NASA Astrophysics Data System (ADS)

Kim, Do-Heyoung; Yong, Kijung; Im, Yeonho; Kim, Woojae; Lee, Doh Chang

2018-01-01

The Materials Challenges in Alternative and Renewable Energy Conference (MCARE 2017) was aimed at providing a forum for closely interactive communication and collaboration between leading experts from various fields related with materials in alternative and renewable energy. MCARE 2017 was held on Jeju Island, Korea on February 20-24, 2017. At this beautiful site, about 450 participants joined the conference and 459 papers were presented. About 110 foreign participants from all over the world particpated. MCARE 2017 was hosted by the Korea Institute of Chemical Engineers (KIChE) and was organized by the Materials Division of KIChE and the American Ceramic Society. Financial support was given by Lotte Chemical, LG Hausys, Jeju Convention & Visitors Bureau, and Korea Tourism Organization, Flexible Thermoelectric Semiconductor Device Technology Center, Super Ultra Low Energy and Emission Vehicle Center, Korea Institute of Materials Science, Jeju Techno Park, Center for Future Energy Materials and Devices and Korea Institute for Rare Metals.

Proceedings of the 18th Annual Conference on Fossil Energy Materials.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Judkins, RR

2004-11-02

The 18th Annual conference on Fossil Energy Materials was held in Knoxville, Tennessee, on June 2 through June 4, 2004. The meeting was sponsored by the U.S. Department of Energy's (DOE) Office of Fossil Energy through the Advanced Research Materials Program (ARM). The objective of the ARM Program is to conduct research and development on materials for longer-term fossil energy applications, as well as for generic needs of various fossil fuel technologies. The management of the program has been decentralized to the DOE Oak Ridge Operations Office and Oak Ridge National Laboratory (ORNL). The research is performed by staff membersmore » at ORNL and by researchers at other national laboratories, universities, and in private industry. The work is divided into the following categories: (1) structural, ceramics, (2) new alloys and coatings, (3) functional materials, and (4) technology development and transfer.« less

Academic Conferences: Representative and Resistant Sites for Higher Education Research

ERIC Educational Resources Information Center

Henderson, Emily F.

2015-01-01

The overarching argument made in this article is twofold. Firstly, academic conferences are posited as sites for higher education research. Secondly, the well-recognised emotional and social processes of conferences are used to make space at the boundaries of higher education research for psychosocial analysis. The article theorises conferences in…

Stability control of senna leaves and senna extracts.

PubMed

Goppel, Martin; Franz, Gerhard

2004-05-01

Powdered senna leaves and a commercial methanolic senna leaf extract were investigated for apparent degradation pathways of known constituents. Different defined storage conditions were chosen according to the guidelines of the international conference on harmonization. Analytical fingerprinting was carried out by HPLC with photodiode array detection. Differences in degradation pathways were observed between the powdered herbal drug material and the extract, depending on storage conditions and packaging materials. Within the crude plant material sennosides were shown to be degraded to sennidine monoglycosides, while rhein 8-O-glucoside was hydrolysed to rhein by enzymatic processes. Degradation of the anthranoid compounds was not due to the same pathways in the investigated commercial extracts. Only unspecific alterations of all compounds were observed. Forced decomposition of this herbal drug preparation under high temperature caused oxidative decomposition of the sennosides to rhein 8-O-glucoside. Furthermore flavonoid glycosides decomposition were observed with an apparent increase in the content of flavone aglyca.

Insights on synergy of materials and structures in biomimetic platelet-matrix composites

NASA Astrophysics Data System (ADS)

Sakhavand, Navid; Shahsavari, Rouzbeh

2018-01-01

Hybrid materials such as biomimetic platelet-matrix composites are in high demand to confer low weight and multifunctional mechanical properties. This letter reports interfacial-bond regulated assembly of polymers on cement-an archetype model with significant infrastructure applications. We demonstrate a series of 20+ molecular dynamics studies on decoding and optimizing the complex interfacial interactions including the role and types of various heterogeneous, competing interfacial bonds that are key to adhesion and interfacial strength. Our results show an existence of an optimum overlap length scale (˜15 nm) between polymers and cement crystals, exhibiting the best balance of strength, toughness, stiffness, and ductility for the composite. This finding, combined with the fundamental insights into the nature of interfacial bonds, provides key hypotheses for selection and processing of constituents to deliberate the best synergy in the structure and materials of platelet-matrix composites.

Radiation-sustained nanocluster metastability in oxide dispersion strengthened materials

NASA Astrophysics Data System (ADS)

Ribis, J.; Bordas, E.; Trocellier, P.; Serruys, Y.; de Carlan, Y.; Legris, A.

2015-12-01

ODS materials constitute a new promising class of structural materials for advanced fission and fusion energy application. These Fe-Cr based ferritic steels contain ultra-high density of dispersion-strengthening nanoclusters conferring excellent mechanical properties to the alloy. Hence, guarantee the nanocluster stability under irradiation remain a critical issue. Nanoclusters are non-equilibrium multicomponent compounds (YTiCrO) forming through a complex nucleation pathway during the elaboration process. In this paper, it is proposed to observe the response of these nanoclusters when the system is placed far from equilibrium by means of ion beam. The results indicate that the Y, Ti, O and Cr atoms self-organized so that nanoclusters coarsened but maintain their non-equilibrium chemical composition. It is discussed that the radiation-sustained nanocluster metastability emerges from cooperative effects: radiation-induced Ostwald ripening, permanent creation of vacancies in the clusters, and fast Cr diffusion mediated by interstitials.

PREFACE: 16th International Summer School on Vacuum, Electron, and Ion Technologies (VEIT 2009)

NASA Astrophysics Data System (ADS)

Möller, Wolfhard; Guerassimov, Nikolay; Ghelev, Chavdar

2010-04-01

The International Summer School on Vacuum, Electron and Ion Technologies (VEIT) has been organized biennially since 1977 when the series of VEIT Schools was launched by the Institute of Electronics, Bulgarian Academy of Sciences with the aim to act as a forum for interchange and dissemination of knowledge and ideas on the latest developments in electron-, ion-, and plasma-assisted technologies. Beginning from 2001, the school has been jointly organized with the Institute of Ion Beam Physics and Materials Research, Forschungszentrum Dresden-Rossendorf, Germany. Whereas, the school initially provided a meeting place for researchers mainly from Eastern and Central European countries, its importance grew issue by issue. The school is now a major scientific event and a meeting place for young scientists from Eastern and Western Europe involved in research and development associated with high-tech industries. Many former school participants have gone on to become leading scientists in research establishments and companies throughout the world. Leading international companies, such as High Voltage Engineering, Balzers, Varian, and Hauzer have used the VEIT forum to present their products through oral presentations, poster contributions or exhibits. The School Proceedings have been published in special issues of the international journals Vacuum, Plasma Processes and Polymers, Journal of Physics: Conference Series. The Sixteenth VEIT school was held in the Black Sea resort Sunny Beach, Bulgaria on 28 September to 2 October 2009. It was attended by close to 110 participants from 13 countries: Belgium, Bulgaria, Czech Republic, France, Germany, The Netherlands, Romania, Slovak Republic, Spain, Sweden, Ukraine, UK and USA. Following the tradition of publishing the VEIT Proceedings, a selection of papers presented at the event is published in this volume of Journal of Physics: Conference Series, under the originality and quality criteria of acceptance by the journal, including peer reviewing. The school comprised nine oral and three poster sessions. Seventeen invited talks of general interest and six progress reports were presented orally. In total 63 contributed papers were presented during the poster sessions. There were several scientific highlights covering fundamentals of interaction of fast particles with solids and challenging practical applications ranging from novel techniques for creating hard coatings, optical/protective layers, biocompatible materials to nanosized structures produced by evaporation, sputtering or external irradiation. Latest results were presented on ion-beam synthesis and modification in both low-energy (deposition and film growth) and high-energy (sputtering, implantation) regimes, and processing of solid materials aiming at patterning the surface or to create nanophase systems towards for electronic or tribological/wear resistant applications. Despite the busy scientific program, the atmosphere was relaxed and informal. The early afternoons of most conference days were free to stimulate both scientific and social interaction between participants, which often took place on the beach. The social program included a welcome reception, a conference banquet, and an outing to historical landmarks in Bulgaria. VEIT 2009 owes its success to many people. The International Advisory Committee shaped the scientific program and ensured high-quality plenary presentations by careful selection of invited speakers. The Local Committee bore the brunt of the organization both at the conference site and in dealing with correspondence, abstracts, and manuscripts for these proceedings. We are grateful to our sponsors Forschungszentrum Dresden-Rossendorf, Dresden, Germany and Bulgarian Academy of Sciences, Sofia, Bulgaria for their generosity that enabled us to support the attendance of students and provided support to deal with mailing, printing, renting the conference site, etc. We would like to thank also all authors for their valuable contributions to these proceedings and to the school, as well as all reviewers for their important work. The next conference in the series will be held in September 2011. Wolfhard Möller, Nikolay Guerassimov, Chavdar Ghelev Guest Editors

Journal of Environmental Radioactivity special issue: II International Conference on Radioecological Concentration Processes. (50 years later).

PubMed

Garcia-Tenorio, Rafael; Holm, Elis

2018-06-01

An international conference on Radioecological Concentration Processes was held in Seville, Spain, 6-9 November 2016 at the Centro Nacional de Aceleradores. It was attended by 160 participants from 35 different countries. This was the 2nd conference on this item since 1966, 50 years ago. The conference covered aspects of radiological important radionuclides on terrestrial, marine and freshwater environments and has allowed obtaining a clear picture of the status of the Radioecology as a consolidated discipline in the 21st century. Copyright © 2017 Elsevier Ltd. All rights reserved.

Preface - From molecules to molecular materials, biological molecular systems and nanostructures: A collection of contributions presented at the XIIIth International Conference on Molecular Spectroscopy

NASA Astrophysics Data System (ADS)

Ratajczak, Henryk; Drozd, Marek; Fausto, Rui

2016-12-01

This volume contains a series of selected contributions presented at the XIIIth International Conference on Molecular Spectroscopy (ICMS): "From Molecules to Molecular Materials, Biological Molecular Systems and Nanostructures" held in Wrocław, Poland, 9-12 September 2015, under the auspices of the Mayor of Wrocław and the European Academy of Sciences, Arts and Humanities. Wrocław was chosen not accidentally as venue for the conference. With more than a thousand years of history, Wrocław is the location of one of the oldest universities in Central Europe. Being a place where education and science play major roles in the daily life of its inhabitants, Wrocław is also a privileged center for spectroscopy in Poland.

Multifunctional Materials and Structures Gordon Research Conference

DTIC Science & Technology

2016-03-08

accelerating transport or dynamic chemical changes in strong, stiff materials, optimizing interfaces between hard and soft materials, multi-physics...Forms; Discuss Future Site and Scheduling Preferences; Election of the Next Vice Chair 7:30 pm - 9:30 pm Actuation and Morphing Discussion Leader

PREFACE: Nanoscale Devices and System Integration Conference (NDSI-2004)

NASA Astrophysics Data System (ADS)

Khizroev, Sakhrat; Litvinov, Dmitri

2004-10-01

The inaugural conference on Nanoscale Devices and System Integration (NDSI-2004) was held in Miami, Florida, 15-19 February, 2004. The focus of the conference was `real-life' devices and systems that have recently emerged as a result of various nanotechnology initiatives in chemistry and chemical engineering, physics, electrical engineering, materials science and engineering, biomedical engineering, computer science, robotics, and environmental science. The conference had a single session all-invited speaker format, with the presenters making the `Who's Who in Nanotechnology' list. Contributed work was showcased at a special poster session. The conference, sponsored by the Institute of Electrical and Electronics Engineers (IEEE) and the US Air Force, and endorsed by Materials Research Society (MRS), drew more than 160 participants from fourteen countries. To strengthen the connection between fundamental research and `real-life' applications, the conference featured a large number of presenters from both academia and industry. Among the participating companies were NEC, IBM, Toshiba, AMD, Samsung, Seagate, and Veeco. Nanotechnology has triggered a new wave of research collaborations between researchers from academia and industry with a broad range of specializations. Such a global approach has resulted in a number of breakthrough accomplishments. One of the main goals of this conference was to identify these accomplishments and put the novel technology initiatives and the emerging research teams on the map. Among the key nanotechnology applications demonstrated at NDSI-2004 were carbon-nanotube-based transistors, quantum computing systems, nanophotonic devices, single-molecule electronic devices and biological magnetic sources. Due to the unprecedented success of the conference, the organizing committee of NDSI has unanimously chosen to turn NDSI into an annual international nanotechnology event. The next NDSI is scheduled for 4-6 April, 2005, in Houston, Texas. Details can be found on the conference web site at http://www.nanointernational.org. This special issue of Nanotechnology features selected papers from NDSI-2004.

PREFACE: 7th European Conference on Applied Superconductivity (EUCAS '05)

NASA Astrophysics Data System (ADS)

Weber, Harald W.; Sauerzopf, Franz M.

2006-07-01

This issue of Journal of Physics: Conference Series contains those contributed papers that were submitted to the Conference Proceedings of the 7th European Conference on Applied Superconductivity (EUCAS '05) on 11 - 15 September 2005. The plenary and invited papers were published in the journal Superconductor Science and Technology 19 2006 (March issue). The scientific aims of EUCAS '05 followed the tradition established at the preceding conferences in Göttingen, Edinburgh, Eindhoven, Sitges (Barcelona), Lyngby (Copenhagen) and finally Sorrento (Napoli). The focus was placed on the interplay between the most recent developments in superconductor research and the positioning of applications of superconductivity in the marketplace. Although initially founded as an exchange forum mainly for European scientists, it has gradually developed into a truly international meeting with significant attendance from the Far East and the United States. The Vienna conference attracted 813 participants in the scientific programme and 90 guests: of the particpants 59% were from Europe, 31% from the Far East, 6% from the United States and Canada and 4% from other nations worldwide. There were 32 plenary and invited lectures highlighting the state-of-the-art in the areas of materials, large-scale and small-scale applications, and 625 papers were contributed (556 of these were posters) demonstrating the broad range of exciting activities in all research areas of our field. A total of 27 companies presented their most recent developments in the field. This volume contains 349 papers, among them 173 on materials (49.6%), 90 on large scale applications (25.8%) and 86 on small scale applications (24.6%). EUCAS '05 generated a feeling of optimism and enthusiasm for this fascinating field of research and for its well established technological potential, especially among the numerous young researchers attending this Conference. We are grateful to all those who participated in the meeting and contributed to its success. Harald W Weber (Conference Chairman) Franz M Sauerzopf (Conference Secretary)

Time-resolved vibrational spectroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tokmakoff, Andrei; Champion, Paul; Heilweil, Edwin J.

2009-05-14

This document contains the Proceedings from the 14th International Conference on Time-Resolved Vibrational Spectroscopy, which was held in Meredith, NH from May 9-14, 2009. The study of molecular dynamics in chemical reaction and biological processes using time-resolved spectroscopy plays an important role in our understanding of energy conversion, storage, and utilization problems. Fundamental studies of chemical reactivity, molecular rearrangements, and charge transport are broadly supported by the DOE's Office of Science because of their role in the development of alternative energy sources, the understanding of biological energy conversion processes, the efficient utilization of existing energy resources, and the mitigation ofmore » reactive intermediates in radiation chemistry. In addition, time-resolved spectroscopy is central to all fiveof DOE's grand challenges for fundamental energy science. The Time-Resolved Vibrational Spectroscopy conference is organized biennially to bring the leaders in this field from around the globe together with young scientists to discuss the most recent scientific and technological advances. The latest technology in ultrafast infrared, Raman, and terahertz spectroscopy and the scientific advances that these methods enable were covered. Particular emphasis was placed on new experimental methods used to probe molecular dynamics in liquids, solids, interfaces, nanostructured materials, and biomolecules.« less

Emerging contaminants: Presentations at the 2009 Toxicology and Risk Assessment Conference

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murnyak, George, E-mail: George.murnyak@us.army.mil; Vandenberg, John, E-mail: Vandenberg.John@epamail.epa.gov; Yaroschak, Paul J., E-mail: Paul.Yaroschak@osd.mil

2011-07-15

A session entitled 'Emerging Contaminants' was held in April 2009 in Cincinnati, OH at the 2009 Toxicology and Risk Assessment Conference. The purpose of the session was to share information on both programmatic and technical aspects associated with emerging contaminants. Emerging contaminants are chemicals or materials that are characterized by a perceived or real threat to human health or environment, a lack of published health standards or an evolving standard. A contaminant may also be 'emerging' because of the discovery of a new source, a new pathway to humans, or a new detection method or technology. The session included fivemore » speakers representing the Department of Defense (DoD), the Environmental Protection Agency (EPA), and each of the military services. The DoD created the Emerging Contaminant Directorate to proactively address environmental, health, and safety concerns associated with emerging contaminants. This session described the scan-watch-action list process, impact assessment methodology, and integrated risk management concept that DoD has implemented to manage emerging contaminants. EPA presented emerging trends in health risk assessment. Researchers made technical presentations on the status of some emerging contaminates in the assessment process (i.e. manganese, RDX, and naphthalene).« less

48 CFR 352.270-1 - Accessibility of meetings, conferences, and seminars to persons with disabilities.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) The Contractor agrees as follows: (a) Planning. The Contractor shall develop a plan to assure that any... planning the meeting, conference, or seminar, shall include in all announcements and other materials... device for the deaf (TDD). (2) The Contractor shall provide, at no additional cost to the individual...

Geometry Report; Cambridge Conference on School Mathematics Feasibility Study No. 39.

ERIC Educational Resources Information Center

Stolzenberg, Gabriel

These materials were written with the aim of reflecting the thinking of the Cambridge Conference on School Mathematics (CCSM) regarding the goals and objectives for school mathematics. This report deals with some seventh grade mathematical concepts taught at Cambridge Friends' School. The discovery approach was utilized by the teacher in order to…

New Perspectives in Administration: Report of an Elementary Principals' Conference.

ERIC Educational Resources Information Center

Dohnal, Hope

1975-01-01

A conference on new perspectives in school administration was held for elementary school principals in the summer of 1975 by the Confederation of Oregon School Administrators. This paper summarizes material presented in five topic areas by eight speakers. Steve Goldschmidt's talk on school law touched on the administrator's and the school's…

IFLA General Conference, 1985. International Association of Law Libraries (IALL) Round-Table on Access to Information in International Legal Research. Papers.

ERIC Educational Resources Information Center

International Federation of Library Associations, The Hague (Netherlands).

Papers on international access to information pertaining to legal research, which were presented at the 1985 conference of the International Federation of Library Associations (IFLA) include: (1) "Materials of European Intergovernmental Organizations and Their Accessibility through Available Research Tools" (Irene Berkey, Northwestern…

Peace Education: Glimpses from the EUPRA Conference in Firenze. Peace Education Reports No. 5.

ERIC Educational Resources Information Center

Bjerstedt, Ake, Ed.

This report presents the material from a workshop on peace education that was part of a conference sponsored by the European Peace Research Association (EUPRA). Two papers, "Research as a Tool for Peace Education" (Alberto L'Abate) and "Promoting Commitment to Peace and Environmental Responsibility" (Riitta Wahlstrom), are…

Eighteenth annual offshore technology conference. Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1986-01-01

These sixty papers were given at a conference on offshore technology. Topics covered include friction effects of driving piles into sea beds of various compositions, wave forces on offshore platforms, stability, materials testing of various components such as plates, legs, wellheads, pipe joints, and protection of offshore platforms against ice and collision with icebergs.

EMERGING SCIENCE: EPA'S ORD SUPPORTS REGIONAL HAZE PROGRAM; POSTERS FROM BOSC REVIEW AND SCIENCE FORUM

EPA Science Inventory

A series of presentations from EPA's Board of Science Councilors review in April 2005 and the Science Forum in May 2005 are being made available to the Regional Planning Organization conference on June 9-10, 2005. Attendees will be able to review the materials during the confere...

Proceedings of the International Academy for Information Management (IAIM) Annual Conference (13th, Helsinki, Finland, December 11-13, 1998).

ERIC Educational Resources Information Center

Rogers, Camille, Ed.

The conference paper topics include: business and information technology (IT) education; knowledge management; teaching software applications; development of multimedia teaching materials; technology job skills in demand; IT management for executives; self-directed teams in information systems courses; a team building exercise to software…

Women and Development. Courier No. 29.

ERIC Educational Resources Information Center

ASPBAE Courier Service, 1983

1983-01-01

This issue contains materials, about and for women, which have been produced as part of the United Nations Decade for Women. Included are presentations made at the Asian-South Bureau of Adult Education Conferences and other congresses, conferences, and meetings held to discuss women in developing nations. The first three papers deal with the…

Ignition! Fueling the Education Explosion: Proceedings of Conference 1 (Cleveland, Ohio, May 5-6, 1983).

ERIC Educational Resources Information Center

Gardner, Mary, Ed.; Reed-Mundell, Charlene, Ed.

These proceedings contain four presentations and other materials from a conference to provide public schools with information about change so they can take a leadership role in educating for the future. The opening address (Richard Berendzen) discusses changes affecting education and changes in education. "Megatrends: Implications for Education…

Undergraduate Teaching in the Animal Sciences, Proceedings of a Conference.

ERIC Educational Resources Information Center

Commission on Education in Agriculture and Natural Resources, Washington, DC.

The proceedings of a conference which reviewed the content of undergraduate animal science curricula, content of courses in the animal sciences, and methods and materials used in undergraduate teaching in the animal sciences are presented in this bulletin. These individual papers are included: Trends in Animal Agriculture and the Future of…

History of NAMES Conferences

NASA Astrophysics Data System (ADS)

Filippov, Lev

2013-03-01

Franco-Russian NAMES Seminars are held for the purpose of reviewing and discussing actual developments in the field of materials science by researchers from Russia and from the Lorraine Region of France. In more precise terms, as set down by the organizers of the seminar (the Moscow Institute of Steel and Alloys and the Institut National Polytechnique de Lorraine), the mission of the seminars is as follows: the development of scientific and academic contacts, giving a new impulse to joint fundamental research and technology transfer the development and consolidation of scientific, technical and business collaboration between the regions of Russia and Lorraine through direct contact between the universities, institutes and companies involved The first Seminar took place on 27-29 October 2004, at the Institut National Polytechnique de Lorraine (on the premises of the Ecole Européenne d'Ingénieurs en Génie des Matériaux, Nancy, France). The number, variety and quality of the oral presentations given and posters exhibited at the first Seminar were of high international standard. 30 oral presentations were given and 72 posters were presented by 19 participants from five universities and three institutes of the Russian Academy of Sciences participants from 11 laboratories of three universities from the Lorraine region three industrial companies, including the European Aeronautic Defence and Space Company—EADS, and ANVAR (Agence Nationale de Valorisation de la Recherche) From 2005 onwards, it was decided to organize the Seminar every other year. The second Seminar convened on the occasion of the 75th Anniversary of the Moscow Institute of Steel and Alloys on 10-12 November 2005 in Moscow, Russia. The seminar demonstrated the efficiency of the scientific partnership founded between the research groups of Russia and France during the first Seminar. High productivity of the Franco-Russian scientific cooperation on the basis of the Research-Educational Franco-Russian International Centre was demonstrated. By the high standards of the reports presented, as well as by its overall organization, the second Seminar met the standards of an international conference. Reviews of state-of-the-art developments in materials science were given by leading scientists from Moscow and from the Lorraine region. The three days of the seminar were structured into four main themes: Functional Materials Coatings, Films and Surface Engineering Nanomaterials and Nanotechnologies The Environment and three Round Table discussions: Defining practical means of carrying out Franco-Russian collaborations in technology transfer and innovation Materials science ARCUS: Lorraine-Russian collaboration in materials science and the environment 32 oral and 25 poster presentations within four sections were given by a total of 110 participants. NAMES 2007, the 3rd Franco-Russian Seminar on New Achievements in Materials and Environmental Sciences, took place in Metz, France on 7-9 November 2007. The conference highlights fundamentals and development of the five main themes connected to the Lorraine-Russia ARCUS project with possible extension to other topics. The five main subjects included in the ARCUS project are: Bulk-surface-interface material sciences Nanomaterials and nanotechnologies Environment and natural resources Plasma physics—ITER project Vibrational dynamics The first, second and third NAMES conferences were financially supported by the following organizations: Ambassade de France à Moscou Communauté Urbaine du Grand Nancy Région Lorraine Conseil Général de Meurthe et Moselle Institut National Polytechnique de Lorraine Université de Metz Université Henry Poincaré CNRS ANVAR Federal Agency on Science and Innovations of the Ministry of Education and Science of the Russian Federation Moscow Committee on Science and Technologies Moscow Institute of Steel and Alloys (Technological University) The 4th conference is supported by the Ministry of Foreign Affairs of France and the Lorraine Region Council. The conferences have indicated directions for future research and stimulated the possibilities of cooperation between scientists from Lorraine and Russian universities and academic institutions. The participants of the conferences reviewed the remarkable worldwide progress with numerous breakthroughs in areas of fundamental research and industrial applications, specifically in the fields of nanomaterials and nanotechnologies, surface engineering, biomaterials and multifunctional coatings, functionally graded materials, new materials for microelectronics and optics, nanostructured thin films and nanodispersion strengthening coatings, combustion synthesis, new micro- and nanosystems and devices, natural resources, environmental sciences, clean technology, and recently, natural fibrous materials, etc. The participants consider that new fundamental knowledge, new materials, and industrial production methods generated as a result of international cooperation between both countries will be of interest to the industrial sector in Lorraine and Moscow, France and Russia. Professor Lev O Filippov Coordinator of NAMES conferences The PDF also contains details of the conference sponsors and organizing committees.

Electron Technology - ELTE 2013

NASA Astrophysics Data System (ADS)

Szczepański, Paweł; Kisiel, Ryszard; Romaniuk, Ryszard S.

2013-07-01

The paper presents a digest of chosen research and technical work results shown by researchers from technical universities, governmental institutes and research firms during the XIth Scientific Conference on Electron Technology ELTE 2013. ELTE Conference has been held every three years since more than three decades. The ELTE 2013 conference was held in Ryn Castle (Poland) on 16-20 April 2013 and gathered around 270 scientists, theoreticians, technologists and engineers from such areas as material engineering, chemistry, sensors, integrated circuits, electronics engineering, laser industry, photonics, etc. The conference featured the following major four topical sessions - Micro and Nano, Photonics, Materials and Technologies, and Microsystems; two dedicated sessions - a keynote plenary session on hot topics in electron technology, as well as a session on large research projects and grants realized by the relevant community. Oral topical sessions were accompanied by poster sessions. The paper is a succinct topical introduction to the volume of ELTE 2013 proceedings. Over 100 papers, gathered in the volume, present a very relevant cross section and state-of-the-art of this branch of science and technology in Poland with involved international co-operation.

2012 Aspen Winter Conference New Paradigms for Low-Dimensional Electronic Materials, February 5-10, 2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moore, Joel; Rabe, Karin; Nayak, Chetan

2012-05-01

Aspen Center for Physics Project Summary DOE Budget Period: 10/1/2011 to 9/30/2012 Contract # DE-SC0007479 New Paradigms for Low-Dimensional Electronic Materials The 2012 Aspen Winter Conference on Condensed Matter Physics was held at the Aspen Center for Physics from February 5 to 10, 2012. Seventy-four participants from seven countries, and several universities and national labs attended the workshop titled, New Paradigms for Low-Dimensional Electronic Materials. There were 34 formal talks, and a number of informal discussions held during the week. Talks covered a variety of topics related to DOE BES priorities, including, for example, advanced photon techniques (Hasan, Abbamonte, Orenstein,more » Shen, Ghosh) and predictive theoretical modeling of materials properties (Rappe, Pickett, Balents, Zhang, Vanderbilt); the full conference schedule is provided with this report. The week's events included a public lecture (Quantum Matters given by Chetan Nayak from Microsoft Research) and attended by 234 members of the public, and a physics caf© geared for high schoolers that is a discussion with physicists conducted by Kathryn Moler (Stanford University) and Andrew M. Rappe (University of Pennsylvania) and attended by 67 locals and visitors. While there were no published proceedings, some of the talks are posted online and can be Googled. The workshop was organized by Joel Moore (University of California Berkeley), Chetan Nayak (Microsoft Research), Karin Rabe (Rutgers University), and Matthias Troyer (ETH Zurich). Two organizers who did not attend the conference were Gabriel Aeppli (University College London & London Centre for Nanotechnology) and Andrea Cavalleri (Oxford University & Max Planck Hamburg).« less

Editorial: Conference Comments by the General Chair

NASA Astrophysics Data System (ADS)

LaBel, Ken

2012-12-01

An overview is presented of the 49th Annual International Nuclear and Space Radiation Effects Conference (NSREC), held July 16-20, 2012 at the InterContinental Hotel in downtown Miami, Florida, USA. The 2012 Conference followed previous editions as an international radiation effects on electronics, materials, and systems showcase. The conference was sponsored by the Radiation Effects Committee of the IEEE Nuclear and Plasma Sciences Society. In addition, NSREC was supported by a cadre of government agencies and industry members. The 2012 edition of the conference was attended by 607 members of the radiation effects community. Of this number, 118 non-US attendees participated from 20 different countries with particularly strong attendance from France, United Kingdom, Japan, Canada, and Germany. Total attendance including exhibitors and guests was 802 people.

PREFACE: International Conference on Solid Films and Surfaces (ICSFS 2014)

NASA Astrophysics Data System (ADS)

Achete, C. A.; Almeida, C. M.; Cremona, M.; Rocca, M.; Stavale, F.

2015-03-01

Foreword The 17th ICSFS took place at the wonderful city of Rio de Janeiro, Brazil from the 8th to the 11th of September, 2014. The conference focused on recent advances in controlling and characterizing the physical and chemical properties of films and surfaces, with a particular emphasis on materials for electronic, photonic and spintronic applications. In addition, themes of bio-functionalized structures and devices were strongly discussed in the ICSFS, covering interdisciplinary nano and nano-bio science and technology. The conference has promoted, in various sub-fields of materials surfaces and thin films, an excellent forum for exchange of ideas, presentation of technical achievements and discussion of future directions in the field. In this volume of the IOP Conference Series: Materials Science and Engineering we are glad to present 11 peer-reviewed ICSFS contributing papers. The cross-disciplinary nature of conference topics is clearly reflected in these Proceedings' contents. The themes discussed ranged from those close to more traditional condensed matter physics, such as semiconductor surfaces to physical chemistry related issues. The Proceedings were organized in accordance with contributions presented at the Conference. We were glad with the presence of over 160 participants, including 24 invited and plenary talks and over 50 oral contributions. We strongly believe that these Proceedings will be useful for a wide audience of those interested in basic and applied surfaces and thin solid interfaces. Acknowledgment We would like to acknowledge the hard work, professional skills and efficiency of the team which oversaw the general organization, particularly of Dicom (Social Communication Division) from the National Institute of Metrology, Quality and Technology, Inmetro (Brazil). We also would like to thank all the invited speakers and session chairs for making the meeting such a great success. The Conference was supported and sponsored by Academia Brasileira de Ciências, CNPq, CAPES, Inmetro, FEI Company and Carl-Zeiss Company. We are grateful for the commercial exhibition of several leading instrument companies that provided great financial support. We thank Altmann, Bruker, CAMECA, Edwards, Horiba, M&M Vácuo, Oxford Instruments, Renishaw, RHK Technology, and SPECS.

Conference for Women Administrators: Financial Management of Colleges and Universities.

ERIC Educational Resources Information Center

National Association of College and University Business Officers, Washington, DC.

The process for organizing and conducting a conference of finance and budgeting in higher education is described in this manual designed for use by groups interested in developing successful conferences in their regions. The manual is an outgrowth of a series of conferences sponsored by the Committee for the Concerns of Women in New England…

20 CFR 410.561a - When waiver may be applied and how to process the request.

Code of Federal Regulations, 2011 CFR

2011-04-01

... personal conference; the procedure for reviewing the claims file prior to the personal conference; the... necessary to fully inform the individual about the personal conference. The file review is always scheduled at least 5 days before the personal conference. (d) At the file review, the individual and the...

An international conference in honour of the centennial of the birth of Ya.B. Zeldovich, "Subatomic Particles, Nucleons, Atoms, the Universe: Processes and Structure"

NASA Astrophysics Data System (ADS)

Kilin, S. Ya.; Ruffini, R.; Vereshchagin, G.

2015-06-01

An international conference in honour of the centennial of the birth of Ya.B. Zeldovich, "Subatomic Particles, Nucleons, Atoms, the Universe: Processes and Structure" was held in Minsk, Belarus on March 10-14, 2014. Scientific papers based on plenary presentations made at this conference are being published in Volumes 6 and 7, 2015 of "Astronomy Reports."

Eleventh Annual V. M. Goldschmidt Conference

NASA Technical Reports Server (NTRS)

2001-01-01

This CD-ROM contains the abstracts and associated files for the Eleventh Annual V.M Goldschmidt Conference. Topics include: Organic Geochemistry; Metamorphic Processes; Igneous Processes; Stable and Radiogenic Isotopes; Planetary Geochemistry and Mineralogy; Mineralogy and Crystallography; Ore Deposits; and Aqueous Geochemistry.

PREFACE: Advances in Cryogenic Engineering - Materials: Proceedings of the International Cryogenic Materials Conference (ICMC) 2015

NASA Astrophysics Data System (ADS)

Kittel, Peter; Sumption, Michael

2015-12-01

The 2015 joint Cryogenic Engineering and International Cryogenic Materials Conferences were held from June 28 through July 2 at the JW Marriott Starr Pass Resort & Spa in Tucson, Arizona. As at past conferences, the international scope of these meetings was strongly maintained with 26 countries being represented by 561 attendees who gathered to enjoy the joint technical programs, industrial exhibits, special events, and natural beauty of the surrounding Sonoran Desert. The program for the joint conferences included a total of 363 presentations in the plenary, oral, and poster sessions. Four plenary talks gave in-depth discussions of the readiness of bulk superconductors for applications, the role of cryogenics in the development of the hydrogen bomb and vice versa, superconducting turboelectric aircraft propulsion and UPS's uses and plans for LNG fuel. Contributed papers covered a wide range of topics including large-scale and small-scale cryogenics, advances in superconductors and their applications. In total, 234 papers were submitted for publication of which 224 are published in these proceedings. The CEC/ICMC Cryo Industrial Expo displayed the products and services of 38 industrial exhibitors and provided a congenial venue for a reception and refreshments throughout the week as well as the conference poster sessions. Spectacular panoramic views of Saguaro National Park, the Sonoran Desert and the night time lights of Tucson set the stage for a memorable week in the American Southwest. Conference participants enjoyed scenic hikes and bike rides, exploring Old Town Tucson, hot and spicy southwestern cuisine, a nighttime lightning display and a hailstorm. Conference Chairs for 2015 were Peter Kittel, Consultant, for CEC and Michael Sumption from The Ohio State University, Materials Science Department for ICMC. Program Chairs were Jonathan Demko from the LeTourneau University for CEC and Timothy Haugan from AFRL/RQQM for ICMC, assisted by the CEC Program Vice Chair, Jennifer Marquardt from Ball Aerospace & Technologies Corp. The Exhibit chair was Richard Dausman of Cryomech, Inc. who also served as Publicity Chair. Finally, Awards Chairs were Ray Radebaugh from the National Institute of Standards and Technology for CEC and David Cardwell from the University of Cambridge, United Kingdom, for ICMC. On June 28, the Cryogenic Society of America presented three short courses: Cryocooler Fundamentals and Space Applications, a full day course given by Dr. Ray Radebaugh and Dr. Ron Ross, Superconducting Radio Frequency Systems, a half-day course by Dr. Rong-Li Geng; and Practical Thermometry and Instrumentation, a half-day course by Dr. Scott Courts. The courses were well attended and catered to both seasoned professionals and newcomers to cryogenics. The able leadership of Paula Pair with the hardworking staff from Centennial Conferences provided outstanding conference management and operations. Thank you Paula and staff for a truly outstanding and memorable conference experience! Finally, to the attendees, authors, editors, and reviewers whose combined efforts have contributed to these proceedings, thanks very much to you all. We look forward to the next CEC/ICMC in Madison, Wisconsin, July 9 - 13, 2017.

Improving college science teaching through peer coaching and classroom assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sode, J.R.

Peer coaching involves the observation of one teacher by another. This observation is accompanied by open and honest reflective discussion. The three main components of peer coaching are pre conference (for setting observation guidelines and building trust), observation (the sytematic collection of classroom data), and post conference (a non evaluative examination and discussion of the classroom). The non-evaluative post conference involves an examination of the teaching/learning process that occurred during the observation phase. In effective assessment, information on what and how well students are learning is used to make decisions about overall program improvement and to implement continuous classroom improvement.more » During peer coaching and assessment neither the instructor nor the students are formally evaluated. This session presents a sequential process in which the peer coaching steps of pre conference, observation, and post conference are combined with assessment to provide instructional guidance. An actual cast study, using the student complaint, {open_quotes}Lectures are boring and useless,{close_quotes} is used to demonstrate the process.« less

Established and Evolving Spoken Research Process Genres: Plenary Lecture and Poster Session Discussions at Academic Conferences.

ERIC Educational Resources Information Center

Shalom, Celia

1993-01-01

Two types of main hall discussions at an ecology conference were studied: plenary lecture discussion as an accepted, established spoken research process genre with its own conventions; and poster session discussion as a fragile, embryonic research process genre struggling for definition. (14 references) (Author/LB)

EDITORIAL Smart materials, multifunctional composites, and morphing structures: selected papers from the 20th International Conference on Adaptive Structures and Technologies (ICAST 2009) Smart materials, multifunctional composites, and morphing structures: selected papers from the 20th International Conference on Adaptive Structures and Technologies (ICAST 2009)

NASA Astrophysics Data System (ADS)

Liao, Wei-Hsin

2010-12-01

The 20th International Conference on Adaptive Structures and Technologies (ICAST) was held on 20-22 October 2009 in Hong Kong. This special section of Smart Materials and Structures is derived from the research papers presented at the conference. Of the 106 papers presented at the conference, 11 papers were reviewed and accepted for this special section, following the regular review procedures of the journal. This special section is focused on smart materials, multifunctional composites, and applications on morphing structures. Smart materials. Smart materials are the foundation of adaptive structures and intelligent systems. The development of new materials will lead to significant improvement in various applications. Three articles are focused on the fabrication of new materials and investigation of their behaviors: Barium strontium zirconate titanate ((Ba1-xSrx)(ZrxTi1-x)O3; BSZT, x = 0.25 and 0.75) ceramics with a highly crystalline structure were fabricated using the combustion technique. The microstructure of BSZT powders exhibited an almost-spherical morphology and had a porous agglomerated form. Polyaniline (PANI)/clay nanoparticles with unique core-shell structure were synthesized via Pickering emulsion polymerization. By dispersing PANI/clay nanoparticles in silicone oil, the ER fluid was made. Magnetic field effects were investigated on the deposition rate and surface morphology of chromium nitride coatings deposited by magnetron sputtering for superior hardness, excellent wear and oxidation resistance. The surface morphology of chromium nitride films was also examined by a scanning electron microscope (SEM). Multifunctional composites. Composites are made from two or more constituent materials so they can combine the best properties of different materials. Five papers deal with fabrication, testing, and modeling of various multifunctional composites: A new active structural fiber (ASF) was fabricated by coating a single carbon fiber with a concentric PZT (PbZr0.52Ti0.48O3) shell using electrolytic deposition. This new ASF is expected to have broader applications due to the higher piezoelectric coupling effect with the use of carbon fiber and PZT. The sol-gel technique was employed to deposit lead zirconium titanium (PZT) and silica composite film onto a copper (Cu)/polyimide (PI) flexible structure. The fabricated PZT-silica composite films were then used for flexible actuator and sensor applications. Interfacial properties and hydrophobicity of multifunctional Ni-nanopowder/epoxy composites were evaluated for self-sensing and actuation. The effects of water content on the actuation performance of ionic polymer-metal composites (IPMCs) were investigated experimentally. Multiscale modelling of a composite electroactive polymer structure was developed, in particular for tubular actuators. The models were validated with experimental data. Morphing structures. Three papers relate to morphing skins and structures. Several issues including stiffness and energy consumption were explored: Composite corrugated structures were used as morphing skin panels (MSPs) in the trailing edge region of a scaled morphing aerofoil section. Wind tunnel testing was carried out to demonstrate the MSP concept. Optimization of a variable-stiffness skin was performed for morphing high-lift devices. The objective is to design the structure to have high enough stiffness to withstand aerodynamic loading and yet low enough stiffness to enable morphing. The aerodynamic and actuation loads were taken into consideration during the optimization. Two adaptive and morphing structures were proposed for low-energy consumption or even energy-harvesting green buildings with the use of an optimization process. Searching for optimal solutions was done by means of an evolutionary technique while the compatibility of the resulting configurations of the adaptive envelope was ensured by the virtual force density method. We would like to thank all of the authors for their significant contributions to this special section for Smart Materials and Structures. We are also grateful to all of the reviewers and associate editors who handled the reviews for their time and effort. I would like to express my sincere appreciation to Professor E Garcia, Editor-in-Chief, for his encouragement by providing the opportunity to make this special section. I am indebted to IOP Publishing for their strong support and the staff, in particular publisher Natasha Leeper, for their special attention and excellent service.

Proceedings of the 26th International Cryogenic Engineering Conference - International Cryogenic Material Conference 2016

NASA Astrophysics Data System (ADS)

Datta, T. S.; Sharma, R. G.; Kar, S.

2017-02-01

International Conference ICEC 26 - ICMC 2016 was organized at New Delhi, India during March 7-11, 2016. Previous conference ICEC25-ICMC 2014 was held at the University of Twente, The Netherlands in July 2014. Next Conference ICEC 27- ICMC 2018 will be held at Oxford, UK during September 3-7, 2018 1. Introduction This is a biennial international conference on cryogenic engineering and cryogenics materials organized by the International Cryogenic Engineering Committee and the International Cryogenic Material Committee. For some years, the host country has been alternating between Europe and Asia. The present conference was held at the Manekshaw Convention Centre, New Delhi, India during March 7-11, 2016 and hosted jointly by the Indian Cryogenics Council (ICC) and the Inter-University Accelerator Centre (IUAC), New Delhi. Put all together as many as 547 persons participated in the conference. Out of these 218 were foreign delegates coming from 25 countries and the rest from India. 2. Inaugural Session & Course Lectures The pre conference short course lectures on “Cryocoolers” and “Superconducting Materials for Power Applications” were organized on 7th March. Cryocooler course was given jointly by Dr. Chao Wang from M/s. Cryomech, USA and Prof. Milind Atrey from IIT Bombay, India. The Course on Superconducting Materials was given by Prof. Venkat Selvamanickam from the University of Houston, USA. The conference was inaugurated in the morning of March 8th in a typical Indian tradition and in the presence of the Chief Guest, Dr. R Chidambaram (Principle Scientific Adviser to Govt. of India), Guest of Honour, Prof. H Devaraj (Vice Chairman University Grant Commission), Prof Marcel ter Brake ( Chair, ICEC Board), Prof. Wilfried Goldacker (Chair, ICMC board), Dr. D Kanjilal (Director IUAC), Dr R K Bhandari, (President, Indian Cryogenic Council ). Dr. T S Datta, Chair Local Organizing Committee coordinated the proceedings of the inaugural function. 3. Technical Session There were 6 plenary talks delivered by the eminent scientist/ technologists. The topics on which these talks were delivered were Cryogenics for Indian Space Programme, The Cold Chain, Super-fluid Cooling Technology, Review on Superconducting Materials in China, Review on Cryogenics and Superconductivity for present day MRI and finally the Mendelssohn Award lecture on the 50 years of Cryogenics and Superconductivity for High Energy Physics. Other than the plenary talks, there were 102 oral presentations covered in 18 technical sessions, out of which 21 were Invited Talks. Each session was dedicated to a specific topic like Large Scale Cryogenics, Cryogenics for Accelerators, Fusion and Space, Cryocoolers, Heat Transfer, Cryogenic Instrumentation, Superconducting Materials, Superconducting Magnets & Cavities, Power Applications, LNG & Safety etc. In addition to oral presentations there were three poster sessions spread over three days and a total of 250 posters were displayed. 4. Award Session There was a dedicated session on Award Ceremony. Dr Haishan Cao, post doctoral researcher at the University of Twente, The Netherlands received the 2016 Klipping Award for his work on Micro-machined Joule-Thomson coolers. The ICMC Cryogenic Material Awardee for Excellence (2016) was Prof. Kazumasa Iida, Department of Crystalline Materials Science, Graduate School of Engineering, Nagoya University. Japan. The paper published in ” Cryogenics 72 (2015), p 111-121 by J. Bartlett, G. Hardy, and I.D. Hepburn, titled “Performance of a fast response miniature Adiabatic Demagnetization Refrigerator using a single crystal tungsten magneto resistive heat switch” was selected for the best paper award. The prestigious 2016 Mendelssohn Award was given to Dr. Philippe Lebrun of CERN, Geneva, Switzerland for his life-long contribution to Cryogenics and Superconductivity for accelerator programme. Each awardees was also presented with a complimentary book from Springer Nature through the efforts of Dr. R.G. Sharma. 5. Exhibition, Cultural Evening & Technical Tour An Industrial exhibition with about 30 international and Indian companies displayed their advanced products in the field of cryogenics and superconductivity for three days. A banquette was hosted in a resort on the outskirt of the city of Delhi on March 10, 2016. A cultural evening was also organized on March 9, 2016 where delegates too participated and enjoyed typical Indian folk dances. On the last day, a technical tour to Inter University Accelerator Centre and a cultural tour to Delhi Monuments was organized for the Delegates. 6. Manuscripts Based on the presentations, we received about 234 manuscripts by March 20, 2016 for the purpose of publication in IOP Conference series (Material Science & Engineering). To ensure the high publication standard mandated by IOP, every paper was reviewed by at least two referees before it was accepted for publication. In all 154 manuscripts were accepted for publication based upon the comments of the referees and the final decision of the Editorial Board. 7. Acknowledgement As editors of this proceedings, we would like to express our sincere appreciation to all of referees / members of organizing and steering committee involved in the evaluation of the papers for their valuable contribution. Our sincere thanks to Ms. Tania Gupta from ICC & Ms. Sarah Toms and Ms. Anete Ashton from IOP publication office for coordinating the publication. Finally we would like to thank all the members of the ICEC committee, the ICMC committee, Steering committee, Local organizing committee, Programme committee and Sectional local committee for their guidance, assistance and cooperation in organizing this twin conference successfully. We look forward to meet you at the next conference, ICEC 27- ICMC 2018 at Oxford, England during September 3-7, 2018. S. Kar R G Sharma T S Datta (Convener) (Chair, Scientific Programme Committee) (Chairman, Local Organizing Committee) December 30, 2016

Estimates of electricity requirements for the recovery of mineral commodities, with examples applied to sub-Saharan Africa

USGS Publications Warehouse

Bleiwas, Donald I.

2011-01-01

To produce materials from mine to market it is necessary to overcome obstacles that include the force of gravity, the strength of molecular bonds, and technological inefficiencies. These challenges are met by the application of energy to accomplish the work that includes the direct use of electricity, fossil fuel, and manual labor. The tables and analyses presented in this study contain estimates of electricity consumption for the mining and processing of ores, concentrates, intermediate products, and industrial and refined metallic commodities on a kilowatt-hour per unit basis, primarily the metric ton or troy ounce. Data contained in tables pertaining to specific currently operating facilities are static, as the amount of electricity consumed to process or produce a unit of material changes over time for a great number of reasons. Estimates were developed from diverse sources that included feasibility studies, company-produced annual and sustainability reports, conference proceedings, discussions with government and industry experts, journal articles, reference texts, and studies by nongovernmental organizations.

Lunar bases and space activities of the 21st century

NASA Technical Reports Server (NTRS)

Mendell, W. W. (Editor)

1985-01-01

The present conference gives attention to such major aspects of lunar colonization as lunar base concepts, lunar transportation, lunar science research activities, moon-based astronomical researches, lunar architectural construction, lunar materials and processes, lunar oxygen production, life support and health maintenance in lunar bases, societal aspects of lunar colonization, and the prospects for Mars colonization. Specific discussions are presented concerning the role of nuclear energy in lunar development, achromatic trajectories and the industrial scale transport of lunar resources, advanced geologic exploration from a lunar base, geophysical investigations of the moon, moon-based astronomical interferometry, the irradiation of the moon by particles, cement-based composites for lunar base construction, electrostatic concentration of lunar soil minerals, microwave processing of lunar materials, a parametric analysis of lunar oxygen production, hydrogen from lunar regolith fines, metabolic support for a lunar base, past and future Soviet lunar exploration, and the use of the moons of Mars as sources of water for lunar bases.

Lunar Science Conference, 8th, Houston, Tex., March 14-18, 1977, Proceedings. Volume 1 - The moon and the inner solar system. Volume 2 - Petrogenetic studies of mare and highland rocks. Volume 3 - Planetary and lunar surfaces

NASA Technical Reports Server (NTRS)

Merril, R. B.

1977-01-01

Solar system processes are considered along with the origin and evolution of the moon, planetary geophysics, lunar basins and crustal layering, lunar magnetism, the lunar surface as a planetary probe, remote observations of lunar and planetary surfaces, earth-based measurements, integrated studies, physical properties of lunar materials, and asteroids, meteorites, and the early solar system. Attention is also given to studies of mare basalts, the kinetics of basalt crystallization, topical studies of mare basalts, highland rocks, experimental studies of highland rocks, geochemical studies of highland rocks, studies of materials of KREEP composition, a consortium study of lunar breccia 73215, topical studies on highland rocks, Venus, and regional studies of the moon. Studies of surface processes, are reported, taking into account cratering mechanics and fresh crater morphology, crater statistics and surface dating, effects of exposure and gardening, and the chemistry of surfaces.

Summary results of the Industry Conference on the Commercial Use of Space

NASA Technical Reports Server (NTRS)

REUSE; Thuerbach, R. P.

1985-01-01

The future intentions of the Federal Republic of Germany in the area of the commercialization of space are presented. It is shown that significant advances in microgravity research, particulary in the areas of materials science, composite materials, physical chemistry, crystal growth, biology, and process engineering will have an effect on future plans for establishing sponsoring organizations to guide commercial interests in German space research. An organizational and functional outline of a proposed sponsoring organization to promote space commercialization under German supervision, including the objectives, the target group to be served, and the administrative structure, is presented. The role of the DFVLR (German Aerospace Research Establishment) and the BMFT (German Ministry for Research and Technology) as sponsoring organizations representing the interests of the German government is shown.

Selected Bibliography of Egyptian Educational Materials, Vol. 1, No. 3, 1975.

ERIC Educational Resources Information Center

Al-Ahram Center for Scientific Translations, Cairo (Egypt).

There are 101 selected entries in this annotated bibliography of Egyptian materials on education published in 1975. Materials include journal articles, books, and government documents. The bibliography covers the following topics: academic certificates and dissertations, art education, audiovisual aids, camps, civics curricula, conferences and…

Introduction to the special issue on the joint meeting of the 19th IEEE International Symposium on the Applications of Ferroelectrics and the 10th European Conference on the Applications of Polar Dielectrics.

PubMed

Tsurumi, Takaaki

2011-09-01

The joint meeting of the 19th IEEE International Symposium on the Applications of Ferroelectrics and the 10th European Conference on the Applications of Polar Dielectrics took place in Edinburgh from August 9-12, 2010. The conference was attended by 390 delegates from more than 40 different countries. There were 4 plenary speakers, 56 invited speakers, and a further 222 contributed oral presentations in 7 parallel session. In addition there were 215 poster presentations. Key topics addressed at the conference included piezoelectric materials, leadfree piezoelectrics, and multiferroics.

Cosmos in the Classroom 2004: A Hands-on Conference on Teaching Astro 101

NASA Astrophysics Data System (ADS)

Dokter, E. F. C.; Fraknoi, A.; Waller, W.

2004-12-01

In July, the Astronomical Society of the Pacific and the New England Space Science Initiative in Education hosted "Cosmos in the Classroom", a 3-day conference at Tufts University devoted to the teaching of introductory astronomy for non-science majors. About 200 instructors from around the country attended from a broad range of institutions (including many community colleges), with a significant fraction indicating that this was their first ever astronomy meeting. This poster describes the conference and reports the results of two surveys completed by participants that can be used to inform future such symposia and discussions. A thick volume of teaching materials and papers from the conference is available through the ASP.

Highlights from the Faraday Discussion on New Directions in Porous Crystalline Materials, Edinburgh, UK, June 2017.

PubMed

Addicoat, Matthew A; Bennett, Thomas D; Stassen, Ivo

2017-09-28

A lively discussion on new directions in porous crystalline materials took place in June 2017, with the beautiful city of Edinburgh as a backdrop, in the context of the unique Faraday Discussions format. Here, 5 minute presentations were given on papers which had been submitted in advance of the conference, with copious time allocated for in-depth discussion of the work presented. Prof. Mircea Dincă (MIT), chair of the scientific committee, opened the conference by welcoming the many different nationalities attending, and outlining the format of discussions.

ALL-UNION CONFERENCE ON APPLICATIONS OF RADIOACTIVE ISOTOPES AND NUCLEAR EMISSIONS IN THE NATIONAL INDUSTRY OF USSR (in Russian)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1960-09-01

Papers presented at the All-Union Conference on Industrial Applications of Radioactive Isotopes and Nuclear Emissions in the National Economy of USSR, April 12 to 16, 1960, in Riga are surveyed. Short summaries are given on applications of radioactive isotopes and nuclear emissions in prospecting, developing mineral resources, metallurgy, ore enrichment processes, machine construction technology, agriculture, food processing, and medicine. Sources of alpha , beta , and gamma radiation for control and automation of processes are also discussed. The full reports from the conference will be published in 1960. (R.V.J.)

Replacing Lectures with Small Groups: The Impact of Flipping the Residency Conference Day

PubMed Central

King, Andrew M.; Mayer, Chad; Barrie, Michael; Greenberger, Sarah; Way, David P.

2018-01-01

The flipped classroom, an educational alternative to the traditional lecture, has been widely adopted by educators at all levels of education and across many disciplines. In the flipped classroom, learners prepare in advance of the face-to-face meeting by learning content material on their own. Classroom time is reserved for application of the learned content to solving problems or discussing cases. Over the past year, we replaced most residency program lectures with small-group discussions using the flipped-classroom model, case-based learning, simulation and procedure labs. In the new model, residents prepared for conference by reviewing a patient case and studying suggested learning materials. Conference day was set aside for facilitated small-group discussions about the case. This is a cross-cohort study of emergency medicine residents who experienced the lecture-based curriculum to residents in the new flipped-classroom curriculum using paired comparisons (independent t-tests) on in-training exam scores while controlling for program year level. We also compared results of the evaluation of various program components. We observed no differences between cohorts on in-training examination scores. Small-group methods were rated the same across program years. Two program components in the new curriculum, an updated format of both adult and pediatric case conferences, were rated significantly higher on program quality. In preparation for didactics, residents in the new curriculum report spending more time on average with outside learning materials, including almost twice as much time reviewing textbooks. Residents found the new format of the case conferences to be of higher quality because of the inclusion of rapid-fire case discussions with targeted learning points. PMID:29383050

PREFACE 11th Europhysical Conference on Defects in Insulating Materials (EURODIM 2010)

NASA Astrophysics Data System (ADS)

Kovács, László; Corradi, Gábor

2010-11-01

The Europhysical Conference on Defects in Insulating Materials, organized in the period 12-16 July 2010 in Pécs, Hungary by the Research Institute for Solid State Physics and Optics, Budapest and the Institute of Physics of the University of Pécs, was the 11th European conference in the alternate series of EURODIM and ICDIM. The first meeting in Argonne, USA in 1956 was dedicated to the field of color centers in alkali halide crystals. Since then the topic has been gradually extended to the real structure of oxides, halides, nitrides and other more complex insulators, and also to less ordered materials like glasses, ceramics and low-dimensional systems, as well as applications e.g. in radiology, non-linear optics, photonics and electronics. Recently the field covered includes the research and technology of defect-related phenomena in crystalline and amorphous wide band-gap bulk, layered and nano-materials. More than 200 colleagues from 31 countries in Europe, Asia, Africa and the Americas have participated in the conference. The program contained in addition to seven invited and three keynote talks 67 further oral presentations as well as some 200 poster contributions. The city of Pécs, a pearl of the Southern Danubia region, was proud of hosting the conference as one of the 2010 European Capitals of Culture, this status crowning a long urban history dating back to paleochristian times in the Roman province Pannonia. On behalf of the Organizing Committee signature László Kovács Conference Chair Conference Chair László Kovács Crystal Physics Department Research Institute for Solid State Physics and Optics Budapest, Hungary e-mail: eurodim2010@optics.szfki.kfki.hu Program Committee Gábor Corradi (Hungary) István Földvári (Hungary) Rob A. Jackson (UK) László Kovács (Hungary) Martin Nikl (Czech Republic) Anna Vedda (Italy) Andrea Watterich (Hungary) International Advisory Committee M.G. Blanchin (France)A. Lushchik (Estonia) F. Bridges (USA)R.M. Montereali (Italy) F. Callens (Belgium)M. Moreno (Spain) R. Capelletti (Italy)P.E. Ngoepe (South Africa) A.V. Chadwick (UK)M. Nikl (Czech Republic) J.D. Comins (South Africa)S.V. Nistor (Romania) J. Corish (Ireland)C. Pedrini (France) H.W. den Hartog (Netherlands) A.M. Stoneham (UK) V. Dierolf (USA)M. Suszynska (Poland) S. Feofilov (Russia)I. Tale (Latvia) K. Funke (Germany)M.E.G. Valerio (Brazil) S. Greulich-Weber (Germany)A. Vedda (Italy) R.A. Jackson (UK)R.T. Williams (USA) L. Kovács (Hungary)A. Yoshikawa (Japan) sponsor logo sponsor logo sponsor logo

Counselor Assessments of Training and Adoption Barriers

PubMed Central

Bartholomew, Norma G.; Joe, George W.; Rowan-Szal, Grace A.; Simpson, D. Dwayne

2007-01-01

The prevailing emphasis on adoption of evidence-based practices suggests more focused training evaluations are needed that capture factors in clinician decisions to use new techniques. This includes relationships of post-conference evaluations with subsequent adoption of training materials. Training assessments were therefore collected at two time points from substance abuse treatment counselors who attended training on dual diagnosis and on therapeutic alliance as part of a state-sponsored conference. Customized evaluations were collected to assess counselor perceptions of training quality, relevance, and resources in relation to its utilization during the 6 months following the conference. Higher ratings for relevance of training concepts and materials to service needs of clients, desire to have additional training, and level of program support were each related to greater trial usage during the follow-up period. Primary resource-related and procedural barriers cited by counselors included lack of time and redundancy with existing practices. PMID:17434707

Waterside Security 2010 (WSS 2010) Conference: Post Conference Report

DTIC Science & Technology

2011-02-01

Memorandum Report NURC-MR-2011-002 Waterside Security 2010 (WSS2010) Conference: post conference report Ronald Kessel and...in NATO, NURC conducts maritime research in support of NATO’s operational and transformation requirements. Reporting to the Supreme Allied Commander...independent business process certification. Copyright © NURC 2011. NATO member nations have unlimited rights to use, modify, reproduce, release

Virtual Reference at a Global University: An Analysis of Patron and Question Type

ERIC Educational Resources Information Center

Rawson, Joseph; Davis, Megan A.; Harding, Julie; Miller, Clare

2013-01-01

This paper covers material presented at the 15th Annual Off-Campus conference (formerly known as the Off Campus Library Services Conference) in Memphis, Tennessee. During the course of this presentation, participants learned how both chat and instant messaging reference are being conducted and evaluated at a major online learning university. This…

SECOND NATIONAL NEA--PR/R CONFERENCE ON CIVIL AND HUMAN RIGHTS IN EDUCATION (WASHINGTON, D.C., MAY 10-11, 1965).

ERIC Educational Resources Information Center

National Education Association, Washington, DC. Commission on Professional Rights and Responsibilities.

THIS CONFERENCE REPORT SUMMARIZES THE SPEECHES AND DIALOGUES OF THE PARTICIPANTS FROM VARIOUS EDUCATIONAL AND CIVIL RIGHTS ORGANIZATIONS. SOME OF THE ISSUES WHICH WERE DISCUSSED INCLUDE SCHOOL DESEGREGATION AND EQUALITY OF EDUCATIONAL OPPORTUNITY AS AFFECTED BY CURRICULUM DEMANDS, INSTRUCTIONAL MATERIALS, TEACHER ATTITUDES, AND BIG CITY PLANS TO…

[Cambridge Conference on School Mathematics Feasibility Studies 9-13.

ERIC Educational Resources Information Center

Cambridge Conference on School Mathematics, Newton, MA.

These materials are a part of a series of studies sponsored by the Cambridge Conference on School Mathematics which reflects the ideas of CCSM regarding the goals and objectives for school mathematics K-12. Feasibility Studies 9-13 contain a wide range of topics. The following are the titles and brief descriptions of these studies. Number…

Symmetry Motion Classes; Cambridge Conference on School Mathematics Feasibility Study No. 40.

ERIC Educational Resources Information Center

McLane, Lyn

These materials were written with the aim of reflecting the thinking of The Cambridge Conference on School Mathematics (CCSM) regarding the goals and objectives for school mathematics. This document details the planning and response for each of ten lessons involving symmetry motions. The problems focused on (1) combining motions in a given order,…

Inequalities and Real Numbers as a Basis for School Mathematics, Cambridge Conference on School Mathematics Feasibility Study No. 38.

ERIC Educational Resources Information Center

Lomon, Earle

These materials were developed as a practical response to some of the recommendations of the 1963 Cambridge Conference on School Mathematics (CCSM). Experimental sessions are described in detail in this report. In the Estabrook Elementary School, Lexington, Massachusetts, first grade children (1964-65 Academic Year) concentrated on material…

Probability Lessons at Hancock School, Lexington; Cambridge Conference on School Mathematics Feasibility Study No. 41.

ERIC Educational Resources Information Center

McLane, Lyn

These materials were written with the aim of reflecting the thinking of Cambridge Conference on School Mathematics (CCSM) regarding the goals and objectives for school mathematics. Presented are plans for teaching 23 probability lessons in the elementary grades at Hancock School, Lexington, Massachusetts. The discovery approach was utilized by the…

American Council on Rural Special Education (ACRES) Conference Proceedings (5th, Bellingham, Washington, March 19-22, 1985).

ERIC Educational Resources Information Center

American Council on Rural Special Education.

The proceedings from the March 1985 conference on rural special education present papers, abstracts, and presentation materials on a wide range of topics. Topics include: rural delivery models, a learning center approach to health and physical education, the microcomputer as an electronic teacher's aide, supervision strategies for a rural…

Proceedings: Eighteenth Annual Conference on Research in Medical Education, Washington, D.C., November 6-7, 1979.

ERIC Educational Resources Information Center

Jones, Deborah L., Comp.

The Research in Medical Education (RIME) Program Planning Committee's selections for program materials for the eighteenth annual conference on Research in Medical Education are contained in this volume. The agenda consisted of poster sessions, presentation of papers, and presentation of symposia. Poster sessions examined such topics as student…

Proceedings of the 1995 International Conference on Outdoor Recreation and Education (Ithaca, New York, October 26-28, 1995).

ERIC Educational Resources Information Center

Koesler, Rena, Ed.; Watters, Ron, Ed.

This proceedings contains 20 papers from the 1995 International Conference on Outdoor Recreation and Education. The papers include guidelines for various aspects of outdoor leadership and materials relevant to program development and administration in outdoor recreation, outdoor education, and adventure therapy and education. Papers are:…

IFLA General Conference, 1984. Libraries Serving the General Public Division. Section on Libraries for the Blind. Papers.

ERIC Educational Resources Information Center

International Federation of Library Associations, The Hague (Netherlands).

Papers on library services and developments in reading materials for the blind and disabled presented at the 1984 IFLA general conference include: (1) "The Establishment of a Library Service to Visually Handicapped People in African Developing Countries" (Paulli Thomsen, Denmark); (2) "Sources of Assistance for Establishing Braille…

Proceedings of the 1983 EMU Conference on Foreign Languages for Business (Ypsilanti, Michigan, April 7-9, 1983). Part VII: Business Spanish.

ERIC Educational Resources Information Center

Voght, Geoffrey M., Ed.

A collection of 11 papers presented at the conference on applications of foreign languages and international studies to business addresses curriculum development and materials selection for college business Spanish. The following papers are included: "Procedures for Implementing and Funding Spanish Courses for University Business Students" (Laura…

Application of Picosecond and Light Scattering Spectroscopies to the Study of Energetic Materials.

DTIC Science & Technology

1980-09-11

Conference in Paris, 1971, p. 488; also Flammarion , 1971. 23. Mitchell, R.S. and Guillet, J.E., Journal of Polymer Science. Part A-2; Polymer Physics...Solids," Proceedings of the International Conference in Paris, 1971, p. ); also Flammarion , 1971. 26. Dil, J.G. and Brody, E.M., Physical Review B

The Impact of Welfare Reform on Adult Literacy Education: Conference Papers and Themes from Small Group Sessions.

ERIC Educational Resources Information Center

National Center for the Study of Adult Learning and Literacy, Boston, MA.

This document contains three commissioned papers and other materials from a 2-day conference. "Politics, Policy, Practice and Personal Responsibility: Adult Education in an Era of Welfare Reform" (Deborah D'Amico) examines the relationship between literacy, poverty, and welfare reform and the implications of those relationships for…

"Catch-Up." Proceedings of the Annual Consumer Education "Catch-Up" Conference (2nd, Washington, D.C., November 11-12, 1976).

ERIC Educational Resources Information Center

Yates, Juanita, Ed.

This booklet summarizes a conference on consumer education which was held for educators, community leaders, program administrators, consumer advocates, and journalists to introduce the principal issues facing consumers and to explore effective program designs and teaching methods and materials. Following a brief executive summary of the conference…

Technology 2001: The Second National Technology Transfer Conference and Exposition, volume 1

NASA Technical Reports Server (NTRS)

1991-01-01

Papers from the technical sessions of the Technology 2001 Conference and Exposition are presented. The technical sessions featured discussions of advanced manufacturing, artificial intelligence, biotechnology, computer graphics and simulation, communications, data and information management, electronics, electro-optics, environmental technology, life sciences, materials science, medical advances, robotics, software engineering, and test and measurement.

International High/Scope Registry Conference Proceedings (Ypsilanti, Michigan, May 8-11, 1996).

ERIC Educational Resources Information Center

High/Scope Educational Research Foundation, Ypsilanti, MI.

These conference proceedings provide summaries of 66 presentations on various aspects of the High/Scope active learning approach for high-risk students, as well as related topics. Topics addressed include: (1) real-life problem solving; (2) songs in daily routines; (3) open-ended art materials; (4) transition strategies; (5) recall ideas for…

Connecting @ the Crossroads. NECC 2000: National Educational Computing Conference Proceedings (21st, Atlanta, Georgia, June 26-28, 2000).

ERIC Educational Resources Information Center

National Educational Computing Conference.

This document contains the proceedings of the National Educational Computing Conference (NECC) 2000. It includes the advance program and registration materials for the NECC. Major themes of NECC 2000 include: connecting technology to teaching and learning; staying connected with professional development; moving beyond the crossroads; teachers as…

A Report of the Home Based Working Conference, Learning Institute of North Carolina (LINC) (March 12-15, 1973).

ERIC Educational Resources Information Center

Learning Inst. of North Carolina, Durham.

The primary objective of this conference was to provide Head Start program representatives with information and descriptive materials on approaches to home-based education for preschool children with the parent as the focal point. Descriptions of six different programs outline objectives, services, advantages, and disadvantages, cost, evaluation…

Mechanics of Textile Composites Conference. Part 1

NASA Technical Reports Server (NTRS)

Poe, Clarence C., Jr. (Editor); Harris, Charles E. (Editor)

1995-01-01

This document is a compilation of papers presented at the Mechanics of Textile Composites Conference in Hampton, Virginia, December 6-8, 1994. This conference was the culmination of a 3-year program that was initiated by NASA late in 1990 to develop mechanics of textile composites in support of the NASA Advanced Composites Technology Program (ACT). The goal of the program was to develop mathematical models of textile preform materials and test methods to facilitate structural analysis and design. Participants in the program were from NASA, academia, and industry.

Materials Presented at the MU-SPIN Ninth Annual Users' Conference

NASA Technical Reports Server (NTRS)

Harrington, James, Jr.; Brown, Robin L.

2000-01-01

MU-SPIN's Ninth Annual Users' Conference was held from September 21-25, 1999, and hosted by Florida International University, a predominantly Hispanic-serving institution located in Miami, Florida. Its theme was A New MU-SPIN for the New Millennium. The MU-SPIN conference focused on showcasing successful experiences with information technology to enhance faculty and student development in areas of scientific and technical research and education. And, it provided a forum for discussing increased participation of MU-SPIN schools in NASA Flight Missions and NASA Educational and Public Outreach activities.

[26th Conference of the Spanish Society of Quality in Healthcare: a good balance between quality, innovation, science and participation].

PubMed

Astier-Peña, M P; Barrasa-Villar, I; García-Mata, J R; Aranaz-Andrés, J; Enriquez-Martín, N; Vela-Marquina, M L

2010-01-01

The experience and learning process of preparing a scientific conference programme, organising and conducting a conference ccompletes the quality circle with the quantitative and qualitative assessment of the process and results. The transmission of this experience and learning process through this paper will improve the performance of committees of future conference venues, partners and participants and collaborators. The method for performing this evaluation is the assessment of the activities of both the scientific and organising committees of the XXVI Conference of the Spanish Society of Quality Healthcare in October 2008 in Zaragoza. The methodology evaluated the observance of the timetable and tasks assigned to the committees in the Congress Manual of the society along with the presentation of final results of the congress concerning scientific participation and overall satisfaction. There were a total of 1211 communications with a rejection rate of 9.1%. Of the total, 577 communications were presented in oral format and 544 in poster format. Aragon was the community of origin of 24% of communications. By subject areas, those of most interest were patient safety, organisational and management processes, and patient perspectives. A total of 83 participants attended 7 of the 11 workshops offered. The average attendance for each workshop was 12 people. The response rate to the assessment of workshops questionnaire was 54.2% with an average score of 4 (scale of 1 to 5). A total of 1131 people attended the conference of which 17% (193) were SECA associates. Out of a total of 1075 overall satisfaction conference questionnaires distributed there was a response rate of 9.30% (100). The scientific content was assessed with an average score of 3.6 and the organization with 3.87, both on a total score of 5 points. According to the number of abstracts received, number of conferences, level of satisfaction with the scientific program and organisation, we can conclude that the XXVI Conference of the Society has been a success, although we are still in our continuous quality improvement circle that will make conferences even better. Copyright © 2010 SECA. Published by Elsevier Espana. All rights reserved.

The Third Annual NASA Science Internet User Working Group Conference

NASA Technical Reports Server (NTRS)

Lev, Brian S. (Editor); Gary, J. Patrick (Editor)

1993-01-01

The NASA Science Internet (NSI) User Support Office (USO) sponsored the Third Annual NSI User Working Group (NSIUWG) Conference March 30 through April 3, 1992, in Greenbelt, MD. Approximately 130 NSI users attended to learn more about the NSI, hear from projects which use NSI, and receive updates about new networking technologies and services. This report contains material relevant to the conference; copies of the agenda, meeting summaries, presentations, and descriptions of exhibitors. Plenary sessions featured a variety of speakers, including NSI project management, scientists, and NSI user project managers whose projects and applications effectively use NSI, and notable citizens of the larger Internet community. The conference also included exhibits of advanced networking applications; tutorials on internetworking, computer security, and networking technologies; and user subgroup meetings on the future direction of the conference, networking, and user services and applications.

Bioconversion of lignocellulosic biomass to xylitol: An overview.

PubMed

Venkateswar Rao, Linga; Goli, Jyosthna Khanna; Gentela, Jahnavi; Koti, Sravanthi

2016-08-01

Lignocellulosic wastes include agricultural and forest residues which are most promising alternative energy sources and serve as potential low cost raw materials that can be exploited to produce xylitol. The strong physical and chemical construction of lignocelluloses is a major constraint for the recovery of xylose. The large scale production of xylitol is attained by nickel catalyzed chemical process that is based on xylose hydrogenation, that requires purified xylose as raw substrate and the process requires high temperature and pressure that remains to be cost intensive and energy consuming. Therefore, there is a necessity to develop an integrated process for biotechnological conversion of lignocelluloses to xylitol and make the process economical. The present review confers about the pretreatment strategies that facilitate cellulose and hemicellulose acquiescent for hydrolysis. There is also an emphasis on various detoxification and fermentation methodologies including genetic engineering strategies for the efficient conversion of xylose to xylitol. Copyright © 2016 Elsevier Ltd. All rights reserved.

The Learning Conference

ERIC Educational Resources Information Center

Ravn, Ib

2007-01-01

Purpose: The purpose of this paper is to call attention to the fact that conferences for professionals rely on massive one-way communication and hence produce little learning for delegates--and to introduce an alternative, the "learning conference", that involves delegates in fun and productive learning processes.…

Technologies of democracy: experiments and demonstrations.

PubMed

Laurent, Brice

2011-12-01

Technologies of democracy are instruments based on material apparatus, social practices and expert knowledge that organize the participation of various publics in the definition and treatment of public problems. Using three examples related to the engagement of publics in nanotechnology in France (a citizen conference, a series of public meetings, and an industrial design process), the paper argues that Science and Technology Studies provide useful tools and methods for the analysis of technologies of democracy. Operations of experiments and public demonstrations can be described, as well as controversies about technologies of democracy giving rise to counter-experiments and counter-demonstrations. The political value of the analysis of public engagement lies in the description of processes of stabilization of democratic orders and in the display of potential alternative political arrangements.

A Summary of the Third Persh Conference: Strategic Issues in Materials for National Defense

DTIC Science & Technology

2012-12-01

addresses a distinct materials-related topic of strategic importance, ranging from thermal management materials to data mining, and from...such as aerogels, shape-memory alloys, polymers, electronic ink, and zeolites . The second demonstration kit, “Zoom in on Life,” investigates how the

Investigation into the Educational Process of Cancer Case Conferences.

ERIC Educational Resources Information Center

Nyquist, Julie G.; And Others

1990-01-01

This study investigated the educational process used in tumor boards (cancer case conferences) and whether the process varied based on type of board, frequency of meetings, and presence or absence of residency training programs in the hospital. These data were collected through observation of 715 board sessions of 37 hospitals and 43 tumor boards.…

PREFACE: Electron Microscopy and Analysis Group Conference (EMAG2015)

NASA Astrophysics Data System (ADS)

MacLaren, Ian

2015-10-01

2015 marked a new venture for the EMAG group of the Institute of Physics in that the conference was held in conjunction with the MMC2015 conference at the wonderful Manchester Central conference centre. As anyone who was there would be able to confirm, this went exceptionally well and was a really vibrant and top quality conference. The oral sessions were filled with good talks, the poster sessions were very lively, and there was a good balance between oral sessions with a specifically "EMAG" identity, and the integration into a larger conference with the ability to switch between up to six parallel sessions covering physical sciences, techniques, and life sciences. The large conference also attracted a wide range of exhibitors, and this is essential for the ongoing success of all of our work, in a field that is very dependent on continued technical innovation and on collaborations between academic researchers and commercial developers of microscopes, holders, detectors, spectrometers, sample preparation equipment, and software, among other things. As has long been the case at EMAG, all oral and poster presenters were invited to submit papers for consideration for the proceedings. As ever, these papers were independently reviewed by other conference attendees, with the aim of continuing the long tradition of the EMAG proceedings being a top quality, peer-reviewed publication, worthy of reference in future years. Whilst I recognise that not all presenters were able to submit papers to the proceedings (for instance due to the need not to prejudice publication in some other journals, or due to avoiding duplicate publication of data), we are gratified that our presenters submitted as many papers as they did. The 41 papers included provide an interesting snapshot of many of the areas covered in the conference presentations, including functional materials, coatings, 3D microscopy, FIB and SEM, nanomaterials, magnetic and structural materials, advances in EM techniques, and EM of biological systems and biomaterials. The arrangement of the papers in the proceedings is not the same as the ordering of the conference sessions, but has been grouped by similar topics. I hope you enjoy reading these papers and that these serve as an interesting summary of what was an excellent conference. Best wishes Dr Ian MacLaren SUPA School of Physics and Astronomy University of Glasgow Glasgow G12 8QQ

Proceedings of the Conferences on Excellence. Regents Advisory Committee on Graduate Study Conference on Excellence (Salt Fork State Park, Ohio, November 3-4, 1983) and Conference on Selective Excellence (Salt Fork State Park, Ohio, November 1-2, 1984).

ERIC Educational Resources Information Center

Ohio Board of Regents, Columbus.

The conferences reported in this document represent two phases of a process that has resulted in an array of programs to strengthen publicly assisted higher education in the state of Ohio. The following conference papers are provided: "A State Perspective on Excellence (and What Is Excellence?)" (Paul J. Olscamp); "The Role of the…

PREFACE International Symposium on Spintronic Devices and Commercialization 2010

NASA Astrophysics Data System (ADS)

Du, You-wei; Judy, Jack; Qian, Zhenghong; Wang, Jianping

2011-01-01

SSDC logo Preface The International Symposium on Spintronic Devices and Commercialization (ISSDC' 2010) was held in Beijing, China, from 21 to 24 October 2010. The aim of the symposium was to provide an opportunity for international experts, academics, researchers, practitioners and students working in the areas of spintronic theories, spintronic materials, and spintronic devices to exchange information on the R&D and commercialization of spintronic materials and devices. New developments, concepts, future research trends and potential commercialization areas were also discussed. The topics covered by ISSDC' 2010 were: Fundmental Spintronic Theories/Experiments Spin polarization, spin-dependent scattering, spin relaxation, spin manipulation and optimization, as well as other related characterizations and applications, etc. Spintronic Materials Giant magnetoresistance materials, magnetic tunnel junction materials, magnetic semiconductor materials, molecular spintronic materials. Spintronic Devices Sensors, isolators, spin logic devices and magnetic random access memories (MRAMs), microwave devices, spin diodes, spin transistor, spin filters and detectors, spin optoelectronic devices, spin quantum devices, single chip computer, spin molecule and single electron devices. Other Magnetic Materials Soft magnetic materials, hard magnetic materials, magneto-optical materials, magnetostriction materials. Applications of Spintronic Devices Magnetic position/angle/velocity/rotation velocity sensors, magnetic encoders, magnetic compasses, bio-medical magnetic devices and other applications. Future Research Trends and the Commercialization of Spintronic Devices Approximately 85 scientists from almost 10 countries participated in the conference. The conference featured 6 keynote lectures, 8 invited lectures, 12 contributed lectures and about 30 posters. We would like to express our gratitude to all participants for their presentations and discussions, which made the conference very successful indeed. We are also grateful to the Advisory Committee, the Conference Chairs, the Excutive Chairs, the Academic Committee, the Organization Committee and the Secretariat for their fruitful work. We would especially like to thank all the organizers listed below for their support in all aspects of the conference. We would like to express our thanks to all the authors for their time and genuine efforts, and to the reviewers for their fruitful comments during the preparation of this volume. ISSDC'2010 ORGANIZATION Advisory Committee Chialing Chien, USAJunhao Chu, ChinaBernard Dieny, FranceKoichiro Inomata, Japan Liangmo Mei, ChinaJohn Sivertsen, USAMingjing Tu, ChinaDingsheng Wang, China Zhanguo Wang, ChinaQikun Xue, ChinaWenshan Zhan, China Conference Chairs Jack Judy, USAYouwei Du, China Executive Chairs Zhenghong Qian, USAJianping Wang, USA Organization Committee ChairJiyan Luo, China Vice ChairsGuilin Duan, ChinaLingling Sun, ChinaBaogen Shen, China MembersTiecheng Lu, ChinaDa Ma, ChinaYe Tian, China Jinsong Xu, ChinaQiuling XuChangmao Yang, China Guanghua Yu, ChinaYi Yan, China Academic Committee ChairsZhenghong Qian, USAYongbing Xu, UK Vice ChairsSeongtae Bae, SingaporeYong Jiang, ChinaDexin Wang, USA Huaiwu Zhang, ChinaJianhua Zhao, China MembersJianwang Cai, ChinaXiangdong Chen, ChinaHaifeng Ding, China Chunhong Hou, USAGunther Baubock, USABin Hu, USA Jungchun Huang, TaiwanDexuan Huo, ChinaYoon H Jeong, Korea Chihuang Lai, TaiwanRunwei Li, ChinaWei Liu, China Jing Shi, USAYasushi Takemura, JapanMark Tondra, USA Shan X Wang, USADi Wu, ChinaDesheng Xue, China Minglang Yan, USAShishen Yan, ChinaXiaofei Yang, China Chun Yeol You, KoreaWei Zhao, ChinaShiming Zhou, China Jianguo Zhu, China Secretariat Secretary-generalChangmao Yang, China Vice Secretary-generalJunli Wang, ChinaJinsong Xu, ChinaYe Tian, China MembersRu Bai, ChinaHongliang Zhan, China ISSDC' 2010 Organizers Department of Science and Technology, CSIC, China SpinIC Inc., China Hangzhou Dianzi University, China State Key Laboratory of Magnetism, Institute of Physics, Chinese Academy of Sciences, China Institute of Measurement Technology, China Magnetic Materials and Devices Branch of Electronic Component Association, China Shenyang Academy of Instrumentation Science / National Engineering Research Center for Transducer, China

Selected papers from the Fourth Annual q-bio Conference on Cellular Information Processing.

PubMed

Nemenman, Ilya; Faeder, James R; Hlavacek, William S; Jiang, Yi; Wall, Michael E; Zilman, Anton

2011-10-01

This special issue consists of 11 original papers that elaborate on work presented at the Fourth Annual q-bio Conference on Cellular Information Processing, which was held on the campus of St John's College in Santa Fe, New Mexico, USA, 11-14 August 2010. Now in its fourth year, the q-bio conference has changed considerably over time. It is now well established and a major event in systems biology. The 2010 conference saw attendees from all continents (except Antarctica!) sharing novel results and participating in lively discussions at both the oral and poster sessions. The conference was oversubscribed and grew to 27 contributed talks, 16 poster spotlights and 137 contributed posters. We deliberately decreased the number of invited speakers to 21 to leave more space for contributed presentations, and the attendee feedback confirmed that the choice was a success. Although the q-bio conference has grown and matured, it has remained true to the original goal of being an intimate and dynamic event that brings together modeling, theory and quantitative experimentation for the study of cell regulation and information processing. Funded in part by a grant from NIGMS and by DOE funds through the Los Alamos National Laboratory Directed Research and Development program, the conference has continued to exhibit youth and vigor by attracting (and partially supporting) over 100 undergraduate, graduate and postdoctoral researchers. The associated q-bio summer school, which precedes the conference each year, further emphasizes the development of junior scientists and makes q-bio a singular event in its impact on the future of quantitative biology. In addition to an increased international presence, the conference has notably diversified its demographic representation within the USA, including increased participation from the southeastern corner of the country. One big change in the conference this year is our new publication partner, Physical Biology. Although we are very grateful to our previous partner, IET Systems Biology, for their help over the years in publicizing the work presented at the conference, we felt that the changing needs of our participants required that we find a new partner. We are thrilled that Physical Biology is publishing the q-bio proceedings this year. It has been a great collaboration, as evidenced by the high quality of this special issue. What's next for q-bio? We are happy to report that NIGMS has recently extended the q-bio conference grant for the next three years, ensuring strong support for junior researchers who need financial assistance to participate in the event. The conference will retain its emphasis on cellular information processing, but will also build connections to other areas of modern biology and biotechnology, focusing specifically on ecology and evolutionary biology next year. Indeed, to fully understand biological information processing systems, they must be studied in their ecological contexts. We will continue to honor distinguished contributors to the field in our opening banquets; the tradition started with Howard Berg, Bruce Alberts and Michael Savageau in previous years, and continues with Dennis Bray at the upcoming 2011 event. Starting in 2011, the conference will also venture into exploration of the social aspects of science. The future is bright for q-bio! We will see you at the Fifth Annual q-bio Conference on 10-13 August 2011, in Santa Fe, New Mexico, USA and at the Sixth Annual q-bio Conference in early August 2012.

Microgravity science and applications bibliography, 1984 revision

NASA Technical Reports Server (NTRS)

Pentecost, E.

1984-01-01

A compilation of Government reports, contractor reports, conference proceedings, and journal articles dealing is presented that deal with flight experiments utilizing a low gravity environment to elucidate and control various processes or with ground based activities that provide supporting research. Subdivisions include six major categories: (1) Electronic Materials; (2) Metals, Alloys, and Composites; (3) Fluid Dynamics and Transports; (4) Biotechnology; (5) Glasses and Ceramics; and (6) Combustion. Also included are publications from the European, Soviet, and Japanese MSA programs. In addition, there is a list of patents and appendices providing a compilation of anonymously authored reports and a cross reference index.

Proceedings of the Symposium on Interfacial Phenomena in Composites: Processing, Characterization and Mechanical Properties Held in Newport, Rhode Island on 1-3 June 1988

DTIC Science & Technology

1988-06-03

ersitx. for ins aluiable assistance before. during and after the conference. WVe are also gratefutl to Mis. Cheryl Hackett and other staff members at...p. 19 1. P’roperties and Design, Materials Research Society, Vol. 19 J. F. Knott , in R. M. Latanision and J. Pickens (eds.), 122, 1988, in press...Atomnistics of Fracture, Plenum. New York, 1983, p. 209. 46 S. Suzuki, M. Obata. K. Abiko and H. Kamura, Tranis. 20 J. F. Knott , in R. M. Latanision and

Aerospace century XXI: Space sciences, applications, and commercial developments; Proceedings of the Thirty-third Annual AAS International Conference, Boulder, CO, Oct. 26-29, 1986

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morgenthaler, G.W.; Koster, J.N.

1987-01-01

Papers are presented on rocket UV observations of Comet Halley, a space system for microgravity research, transitioning from Spacelab to Space Station science, and assemblers and future space hardware. Also considered are spatial and temporal scales of atmospheric disturbances, Doppler radar for prediction and warning, data management for the Columbus program, communications satellites of the future, and commercial launch vehicles. Other topics include space geodesy and earthquake predictions, inverted cellular radio satellite systems, material processing in space, and potential for earth observations from the manned Space Station.

DOE Office of Scientific and Technical Information (OSTI.GOV)

U.S. Bonneville Power Administration

The 2008 Columbia River Estuary Conference was held at the Liberty Theater in Astoria, Oregon, on April 19-20. The conference theme was ecosystem restoration. The purpose of the conference was to exchange data and information among researchers, policy-makers, and the public, i.e., interrelate science with management. Conference organizers invited presentations synthesizing material on Restoration Planning and Implementation (Session 1), Research to Reduce Restoration Uncertainties (Session 2), Wetlands and Flood Management (Session 3), Action Effectiveness Monitoring (Session 4), and Management Perspectives (Session 5). A series of three plenary talks opened the conference. Facilitated speaker and audience discussion periods were held atmore » the end of each session. Contributed posters conveyed additional data and information. These proceedings include abstracts and notes documenting questions from the audience and clarifying answers from the presenter for each talk. The proceedings also document key points from the discussion periods at the end of each session. The conference program is outlined in the agenda section. Speaker biographies are presented in Appendix A. Poster titles and authors are listed in Appendix B. A list of conference attendees is contained in Appendix C.« less

Optical fibers and their applications 2012

NASA Astrophysics Data System (ADS)

Romaniuk, Ryszard S.; Wójcik, Waldemar

2013-01-01

XIVth Conference on Optical Fibers and Their Applications, Nałęczów 2012, which has been organized since more than 35 years, has summarized the achievements of the local optical fiber technology community, for the last year and a half. The conference specializes in developments of optical fiber technology, glass and polymer, classical and microstructured, passive and active. The event gathered around 100 participants. There were shown 60 presentations from 20 research and application groups active in fiber photonics, originating from academia and industry. Topical tracks of the Conference were: photonic materials, planar waveguides, passive and active optical fibers, propagation theory in nonstandard optical fibers, and new constructions of optical fibers. A panel discussion concerned teaching in fiber photonics. The conference was accompanied by a school on Optical Fiber Technology. The paper summarizes the chosen main topical tracks of the conference on Optical Fibers and Their Applications, Nałęczów 2012. The papers from the conference presentations will be published in Proc.SPIE. The next conference from this series is scheduled for January 2014 in Białowieża.

TRANSACTIONS OF THE ALL-UNION CONFERENCE ON INFORMATION RETRIEVAL SYSTEMS AND AUTOMATED PROCESSING OF SCIENTIFIC AND TECHNICAL INFORMATION (3rd): PREFACE

DTIC Science & Technology

The research and development of information services within the USSR, reported at the 3rd All-Union Conference on information retrieval systems and automated processing of scientific and technical information, is discussed.

Merging Bottom-Up with Top-Down: Continuous Lamellar Networks and Block Copolymer Lithography

NASA Astrophysics Data System (ADS)

Campbell, Ian Patrick

Block copolymer lithography is an emerging nanopatterning technology with capabilities that may complement and eventually replace those provided by existing optical lithography techniques. This bottom-up process relies on the parallel self-assembly of macromolecules composed of covalently linked, chemically distinct blocks to generate periodic nanostructures. Among the myriad potential morphologies, lamellar structures formed by diblock copolymers with symmetric volume fractions have attracted the most interest as a patterning tool. When confined to thin films and directed to assemble with interfaces perpendicular to the substrate, two-dimensional domains are formed between the free surface and the substrate, and selective removal of a single block creates a nanostructured polymeric template. The substrate exposed between the polymeric features can subsequently be modified through standard top-down microfabrication processes to generate novel nanostructured materials. Despite tremendous progress in our understanding of block copolymer self-assembly, continuous two-dimensional materials have not yet been fabricated via this robust technique, which may enable nanostructured material combinations that cannot be fabricated through bottom-up methods. This thesis aims to study the effects of block copolymer composition and processing on the lamellar network morphology of polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) and utilize this knowledge to fabricate continuous two-dimensional materials through top-down methods. First, block copolymer composition was varied through homopolymer blending to explore the physical phenomena surrounding lamellar network continuity. After establishing a framework for tuning the continuity, the effects of various processing parameters were explored to engineer the network connectivity via defect annihilation processes. Precisely controlling the connectivity and continuity of lamellar networks through defect engineering and optimizing the block copolymer lithography process thus enabled the top-down fabrication of continuous two-dimensional gold networks with nanoscale properties. The lamellar structure of these networks was found to confer unique mechanical properties on the nanowire networks and suggests that materials templated via this method may be excellent candidates for integration into stretchable and flexible devices.

A new reactive atom plasma technology (RAPT) for precision machining: the etching of ULE optical surfaces

NASA Astrophysics Data System (ADS)

Fanara, Carlo; Shore, Paul; Nicholls, John R.; Lyford, Nicholas; Sommer, Phil; Fiske, Peter

2006-06-01

The next generation of 30-100 metre diameter extremely large telescopes (ELTs) requires large numbers of hexagonal primary mirror segments. As part of the Basic Technology programme run jointly by UCL and Cranfield University, a reactive atomic plasma technology (RAP(tm)) emerged from the US Lawrence Livermore National Laboratory (LLNL), is employed for the finishing of these surfaces. Results are presented on this novel etching technology. The Inductively Coupled Plasma (ICP) operated at atmospheric pressure using argon, activates the chemical species injected through its centre and promotes the fluorine-based chemical reactions at the surface. Process assessment trials on Ultra Low Expansion (ULE(tm)) plates, previously ground at high material removal rates, have been conducted. The quality of the surfaces produced on these samples using the RAP process are discussed. Substantial volumetric material removal rates of up to 0.446(21) mm 3/s at the highest process speed (1,200 mm/min) were found to be possible without pre-heating the substrate. The influences of power transfer, process speed and gas concentration on the removal rates have been determined. The suitability of the RAP process for revealing and removing sub-surface damage induced by high removal rate grinding is discussed. The results on SiC samples are reported elsewhere in this conference.

Preface for DRIP X proceedings

NASA Astrophysics Data System (ADS)

Landesman (Chairman), Jean-Pierre; Montgomery (Co-Chairman), Paul C.

2004-07-01

This issue of the “European Physical Journal Applied Physics” contains the papers presented at the Tenth International Conference on Defects: Recognition, Imaging and Physics in Semiconductors (DRIP X), held in Batz-sur-Mer, France, from 29th September to 2nd October, 2003. The conference gathered 150 scientists from academic institutions and industry of 20 countries from around the world, showing the pertinence of the biennial series of DRIP conferences. A much appreciated aspect of DRIP X was the variety of the different backgrounds of the participants, leading to much fruitful exchange and stimulating discussion. Following the spirit of previous DRIP conferences, the main concern of DRIP X was the methodology and the physics of measurement procedures, together with specific developments in instrumentation, and their relationship with the structural, optical and electrical properties of semiconductor defects. The topics covered related to the different methods and techniques used for the recognition and imaging of defects in semiconductor materials (Si, III-V's including nitrides, SiC, IV-IV's, II-VI's, organic compounds, ...) and in semiconductor devices ranging from defects in the raw materials at the wafer level, through process-induced defects and defects that appear during operation (burn-in, aging tests, ...). One of the highlights of the social events of DRIP X was the awards ceremony as part of the celebrations for the Tenth meeting of DRIP. The founders of the DRIP series, Professor Jean-Pierre Fillard and Professor Tomoya Ogawa were both invited to be permanent members of the International Steering Committee and awarded with appropriately engraved trophies to mark the occasion. With help form Tomoya Ogawa, Jean-Pierre Fillard organized the first DRIP conference in 1985 in La Grande Motte, France. The amusing and thought provoking slide presentation by Jean-Pierre Fillard went a great way to remind us of the history of this conference series and to fill with enthusiasm the young and the not-so-young researchers alike to face up to the ever present challenges of defect analysis in semiconductors. We were reminded that with the large variety of imaging techniques available and the vast improvements in technology, there lies ahead tremendous potential for gaining a better understanding of defects in semiconductors by applying image processing techniques. DRIP X was arranged into 13 oral sessions, consisting of 12 invited talks and 59 contributed papers, and two poster sessions made up from 76 contributed papers. The Proceeding chapters reflect the oral sessions with the poster papers being added to the relevant sessions. The sessions covered the following topics: Sessions 1 and 2 were on nanostructures and near field probe techniques, with invited papers from F. Priolo on the luminescence properties of Si nanocrystals and L.K. Orlov on quantum wires in GaAs/GaInAs materials systems prepared by electrochemical etching. Session 3 was on defects in silicon, with an invited paper by Y. Mochizuki on the characterization of process induced defects in deep sub-micron transistors by electrically detected magnetic resonance and transmission electron microscopy. Session 4 was on electrical properties, with an invited paper by D. Roy on the electrical characteristics of advanced MOS structures with ultra-thin oxides. Sessions 5 and 6 were on defects in wide bandgap materials, with invited papers by S. Müller on the current status of the quality of SiC substrates and epitaxial layers, and by J.L Weyher on the characterization of defects in wide band gap semiconductors (mainly GaN) by defect-selective etching in combination with other standard methods (transmission electron microscopy, photo-luminescence, micro-Raman). Session 7 was on spectroscopic techniques, with an invited paper by V. Higgs on the use of photo-luminescence wafer mapping in the context of the production of Si or SiGe materials. Session 8 was on electron beam methods, with an invited paper by R. Balboni on strain mapping in deep sub-micron Si devices using convergent beam electron diffraction in STEM. Session 9 was a specific session on the issue of defect mapping over large area wafers, a new idea to the DRIP series, for investigating the possibilities of implementing different kinds of techniques having a potential for high lateral resolution over the very large areas required nowadays for semiconductor substrates and materials. This session was introduced by an invited talk by S. Ostapenko on defect mapping in multi-crystalline Si as well as SiC wafers. Session 10 on multi-techniques investigation, also new to the DRIP series, showed the importance of having access to a wide variety of techniques and managing such a “strategy” in an optimal way for solving certain defect problems present in today's semiconductor materials. The session was introduced by an invited talk by I. De Wolf, showing the importance of this approach to failure analysis in microelectronics. Session 11 was on X-ray based techniques, with an invited paper by U. Zeimer on the use of grazing incidence X-ray diffraction and X-ray spectroscopy (in the scanning or transmission electron microscope) for the study of epitaxial layers grown after lateral patterning at the nanometer scale of underlying layers. Session 12 was on defects in semiconductor lasers and other devices, with an invited paper by J. Jiménez on the use of spectroscopic techniques (cathodo-luminescence, micro-Raman...) for the assessment of defects in relation to aging behavior in high-power AlGaAs/GaAs laser diodes. Session 13, the final session, was on electronic properties through contactless characterization. We would like to thank all those involved in the local Organizing Committee, the International Steering Committee and the Scientific Committee for their hard work in helping with the organization of DRIP X, as well as all those who participated in the conference as delegates, speakers, invited speakers and chairpersons for contributing to such a successful conference. Thanks are also due to colleagues who served as referees for the papers. For its eleventh edition in 2005, DRIP XI will normally be organized by Professor Zhanguo Wang in Peking, China. Details of DRIP XI will be posted on the DRIP X website www.cnrs-imn.fr/dripx.

Visual Information Processing for Television and Telerobotics

NASA Technical Reports Server (NTRS)

Huck, Friedrich O. (Editor); Park, Stephen K. (Editor)

1989-01-01

This publication is a compilation of the papers presented at the NASA conference on Visual Information Processing for Television and Telerobotics. The conference was held at the Williamsburg Hilton, Williamsburg, Virginia on May 10 to 12, 1989. The conference was sponsored jointly by NASA Offices of Aeronautics and Space Technology (OAST) and Space Science and Applications (OSSA) and the NASA Langley Research Center. The presentations were grouped into three sessions: Image Gathering, Coding, and Advanced Concepts; Systems; and Technologies. The program was organized to provide a forum in which researchers from industry, universities, and government could be brought together to discuss the state of knowledge in image gathering, coding, and processing methods.

Exploring demand reduction through design, durability and 'usership' of fashion clothes.

PubMed

Fletcher, Kate

2017-06-13

Global planetary boundaries confer limits to production and consumption of material goods. They also confer an obligation to experiment, as individuals and collectively as society, with less-materially-intensive, but no less exuberant, ways of living. This paper takes up this mantle and explores materials demand reduction through a focus on design, fashion garments and the universal, everyday activity of wearing clothes. It takes as its starting point the design of longer-lasting products, a widely favoured strategy for increasing materials efficiency and reducing materials demand in many sectors, including fashion. Drawing on scholarship in the field of design for sustainability and ethnographic research conducted in 16 locations in nine countries about already-existing practices of intensive use and maintenance of clothing, this paper critiques the effectiveness of durability strategies to reduce the amount of materials used. It argues for an update in the familiar preference within sustainability debates for the 'techno-fix' to explore instead resourceful use of materials as emerging from human actions and relationships with material goods. It suggests that, while facilitated by design, technology and engineering, opportunities to reduce materials demand begin in individual and collective practices, which, in turn, have dynamic implications for use of materials.This article is part of the themed issue 'Material demand reduction'. © 2017 The Author(s).

Exploring demand reduction through design, durability and ‘usership’ of fashion clothes

PubMed Central

2017-01-01

Global planetary boundaries confer limits to production and consumption of material goods. They also confer an obligation to experiment, as individuals and collectively as society, with less-materially-intensive, but no less exuberant, ways of living. This paper takes up this mantle and explores materials demand reduction through a focus on design, fashion garments and the universal, everyday activity of wearing clothes. It takes as its starting point the design of longer-lasting products, a widely favoured strategy for increasing materials efficiency and reducing materials demand in many sectors, including fashion. Drawing on scholarship in the field of design for sustainability and ethnographic research conducted in 16 locations in nine countries about already-existing practices of intensive use and maintenance of clothing, this paper critiques the effectiveness of durability strategies to reduce the amount of materials used. It argues for an update in the familiar preference within sustainability debates for the ‘techno-fix’ to explore instead resourceful use of materials as emerging from human actions and relationships with material goods. It suggests that, while facilitated by design, technology and engineering, opportunities to reduce materials demand begin in individual and collective practices, which, in turn, have dynamic implications for use of materials. This article is part of the themed issue ‘Material demand reduction’. PMID:28461430

Recent advances in the science and engineering of organic light-emitting diodes (Conference Presentation)

NASA Astrophysics Data System (ADS)

Kippelen, Bernard; Gaj, Michael P.; Zhang, Xiaoqing; Choi, Sangmoo; Fuentes-Hernandez, Canek; Zhang, Yadong; Barlow, Stephen; Marder, Seth R.; Voit, Walter E.; Wei, Andrew

2016-09-01

In this talk, we will discuss recent advances in the science and engineering of organic light-emitting diodes (OLEDs). First, we will focus on materials in which light emission involves the process of thermally activated delayed fluorescence (TADF). In these materials, triplet excited states can convert into optically emissive singlet excited states by reverse intersystem crossing, allowing for nearly 100% internal quantum efficiency. This process can be used to design a new class of materials that are all organic, offering a lower cost alternative to conventional electrophosphorescent materials that contain heavy and expensive elements such as Pt and Ir. We will discuss molecular design strategies and present examples of materials that can be used as emitters or hosts in the emissive layer. In a second part of this talk, we will review recent progress in fabricating OLEDs on shape memory polymer substrates (SMPs). SMPs are mechanically active, smart materials that can exhibit a significant drop in modulus once an external stimulus such as temperature is applied. In their rubbery state upon heating, the SMP can be easily deformed by external stresses into a temporary geometric configuration that can be retained even after the stress is removed by cooling the SMP to below the glass transition temperature. Reheating the SMP causes strain relaxation within the polymer network and induces recovery of its original shape. We will discuss how these unique mechanical properties can also be extended to a new class of OLEDs.

Quality Education--The Rural Way. Proceedings of the Annual National Conference of People United for Rural Education (7th, Des Moines, Iowa, February 2-3, 1984).

ERIC Educational Resources Information Center

Losure, Joyce, Ed.; And Others

The 1984 conference proceedings consists of introductory material followed by 12 major addresses in 4 general sessions: "Building Partnerships in Rural Education," Robert M. Worthington; "Greetings from the National Rural Education Association," James D. Jess; "Excellence in Rural Education," Anne Campbell;…

International Conference on Infrared and Millimeter Waves, 16th, Ecole Polytechnique Federale de Lausanne, Switzerland, Aug. 26-30, 1991, Conference Digest

NASA Astrophysics Data System (ADS)

Siegrist, M. R.; Tran, T. M.; Tran, M. Q.

1991-10-01

Consideration is given to millimeter waves (MMW), submillimeter waves, materials properties, and gyrotrons/FEL. Particular attention is given to MMW sources, detectors and mixers; MMW systems, devices and antennas; guided propagation; high Tc superconductors; semiconductors; MMW astronomy and atmospheric physics; lasers, submillimeter devices, and plasma diagnostics; and submillimeter detectors.

An Experimental Text in Transformational Geometry, Student Text; Cambridge Conference on School Mathematics Feasibility Study No. 43a.

ERIC Educational Resources Information Center

Cambridge Conference on School Mathematics, Newton, MA.

This is part of a student text which was written with the aim of reflecting the thinking of The Cambridge Conference on School Mathematics (CCSM) regarding the goals and objectives for mathematics. The instructional materials were developed for teaching geometry in the secondary schools. This document is chapter six and titled Motions and…

[Geometry Through Symmetry, Cambridge Conference on School Mathematics Feasibility Study No. 32.

ERIC Educational Resources Information Center

Friedman, Bernard

These materials were written for the use of a class of eighth grade high ability students in a four week course sponsored by Educational Services Incorporated on the Stanford campus. They represent a practical response to the proposal by the Cambridge Conference of 1963 that geometry be taught by vector space methods. Instead of using vector…

Inequality Lessons at Adams School, Lexington; Cambridge Conference on School Mathematics Feasibility Study No. 42.

ERIC Educational Resources Information Center

Fitzgerald, B.

These materials were written with the aim of reflecting the thinking of The Cambridge Conference on School Mathematics (CCSM) regarding the goals and objectives for school mathematics. Presented are plans for teaching 15 inequality lessons for above average first grade students. The discovery approach is utilized by the teacher in order to involve…

Cooperative Collection Development in Multitype Library Networks: A Beginning--Goals and Methods. Proceedings of the Annual Conference of the Missouri Library Association (1980).

ERIC Educational Resources Information Center

Tompkins, Philip, Ed.

This document presents the proceedings of a conference organized to review the cooperative collection development features of the Missouri State Network Plan and to outline specific goals, methods, and materials for facilitating cooperative collection development projects in the state's multitype library networks. An introduction provides…

Instruction by Design, A Report on the Conference on New Instructional Materials in Physics (University of Washington, Seattle, June 21-August 21, 1965).

ERIC Educational Resources Information Center

Commission on Coll. Physics, College Park, MD.

This review has a section devoted to each of the following conference topics: Monographs, Film, Experiment Sequences, Computer-assisted Instruction, Designing a Unit of Instruction, and Toward New Solutions. Each section contains background discussion on the rationale, philosophy, and importance for improvements in the area being considered. The…

Education, Internationalism and Empire at the 1928 and 1930 Pan-Pacific Women's Conferences

ERIC Educational Resources Information Center

Goodman, Joyce

2014-01-01

In order to explore education at the first two Pan-Pacific Women's Conferences, this article builds on Campbell and Sherington's account of education in Oceania and on empirical research undertaken by Selleck and others, along with relevant primary source material. It traces elements of empire as they played out in inter-war women's education and…