49 CFR 173.244 - Bulk packaging for certain pyrophoric liquids (Division 4.2), dangerous when wet (Division 4.3...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 2 2013-10-01 2013-10-01 false Bulk packaging for certain pyrophoric liquids (Division 4.2), dangerous when wet (Division 4.3) materials, and poisonous liquids with inhalation hazards...), dangerous when wet (Division 4.3) materials, and poisonous liquids with inhalation hazards (Division 6.1...

49 CFR 173.244 - Bulk packaging for certain pyrophoric liquids (Division 4.2), dangerous when wet (Division 4.3...

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 2 2012-10-01 2012-10-01 false Bulk packaging for certain pyrophoric liquids (Division 4.2), dangerous when wet (Division 4.3) materials, and poisonous liquids with inhalation hazards...), dangerous when wet (Division 4.3) materials, and poisonous liquids with inhalation hazards (Division 6.1...

49 CFR 173.244 - Bulk packaging for certain pyrophoric liquids (Division 4.2), dangerous when wet (Division 4.3...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Bulk packaging for certain pyrophoric liquids (Division 4.2), dangerous when wet (Division 4.3) materials, and poisonous liquids with inhalation hazards...), dangerous when wet (Division 4.3) materials, and poisonous liquids with inhalation hazards (Division 6.1...

Automated Sneak Circuit Analysis Technique

DTIC Science & Technology

1990-06-01

the OrCAD/SDT module Port facility. 2. The terminals of all in- circuit voltage sources (e , batteries) must be labeled using the OrCAD/SDT module port...ELECTE 1 MAY 2 01994 _- AUTOMATED SNEAK CIRCUIT ANALYSIS TECHNIQUEIt~ w I wtA who RADC 94-14062 Systems Reliability & Engineering Division Rome...Air Develpment Center Best Avai~lable copy AUTOMATED SNEAK CIRCUIT ANALYSIS TECHNIQUE RADC June 1990 Systems Reliability & Engineering Division Rome Air

Parameters Free Computational Characterization of Defects in Transition Metal Oxides with Diffusion Quantum Monte Carlo

NASA Astrophysics Data System (ADS)

Santana, Juan A.; Krogel, Jaron T.; Kent, Paul R.; Reboredo, Fernando

Materials based on transition metal oxides (TMO's) are among the most challenging systems for computational characterization. Reliable and practical computations are possible by directly solving the many-body problem for TMO's with quantum Monte Carlo (QMC) methods. These methods are very computationally intensive, but recent developments in algorithms and computational infrastructures have enabled their application to real materials. We will show our efforts on the application of the diffusion quantum Monte Carlo (DMC) method to study the formation of defects in binary and ternary TMO and heterostructures of TMO. We will also outline current limitations in hardware and algorithms. This work is supported by the Materials Sciences & Engineering Division of the Office of Basic Energy Sciences, U.S. Department of Energy (DOE).

Vehicle/Guideway Interaction in Maglev Systems

DTIC Science & Technology

1992-03-01

Technology Division Materials and Components in Maglev Systems Technology Division Materials and Components Technology Division byY. Cai, S. S. Chen, and D. M...Transportation Systems Reports (UC-330, Vehicle/Guideway Interaction in Maglev Systems by Y. Cai and S. S. Chen Materials and Components Technology Division D. M...Surface Irregularities ...................................... 32 4 Vehicle/Guideway Interaction in Transrapid Maglev System .................. 34 4.1

Metals and Ceramics Division progress report for period ending December 31, 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Craig, D.F.; Bradley, R.A.; Weir, J.R. Jr.

1994-07-01

This report provides an overview of activities and accomplishsments of the division from October 1992 through December 1993; the division is organized to provide technical support, mainly in the area of high-temperature materials, for technologies being developed by DOE. Activities span the range from basic research to industrial interactions (cooperative research and technology transfer). Sections 1-5 describe the different functional groups (engineering materials, high-temperature materials, materials science, ceramics, nuclear fuel materials). Sect. 6 provides an alternative view of the division in terms of the major programs, most of which cross group lines. Sect. 7 summarizes external interactions including cooperative Rmore » and D programs and technology transfer functions. Finally, Sect. 8 briefly describes the division`s involvement in educational activities. Several organizational changes were effected during this period.« less

New tools for investigating student learning in upper-division electrostatics

NASA Astrophysics Data System (ADS)

Wilcox, Bethany R.

Student learning in upper-division physics courses is a growing area of research in the field of Physics Education. Developing effective new curricular materials and pedagogical techniques to improve student learning in upper-division courses requires knowledge of both what material students struggle with and what curricular approaches help to overcome these struggles. To facilitate the course transformation process for one specific content area --- upper-division electrostatics --- this thesis presents two new methodological tools: (1) an analytical framework designed to investigate students' struggles with the advanced physics content and mathematically sophisticated tools/techniques required at the junior and senior level, and (2) a new multiple-response conceptual assessment designed to measure student learning and assess the effectiveness of different curricular approaches. We first describe the development and theoretical grounding of a new analytical framework designed to characterize how students use mathematical tools and techniques during physics problem solving. We apply this framework to investigate student difficulties with three specific mathematical tools used in upper-division electrostatics: multivariable integration in the context of Coulomb's law, the Dirac delta function in the context of expressing volume charge densities, and separation of variables as a technique to solve Laplace's equation. We find a number of common themes in students' difficulties around these mathematical tools including: recognizing when a particular mathematical tool is appropriate for a given physics problem, mapping between the specific physical context and the formal mathematical structures, and reflecting spontaneously on the solution to a physics problem to gain physical insight or ensure consistency with expected results. We then describe the development of a novel, multiple-response version of an existing conceptual assessment in upper-division electrostatics courses. The goal of this new version is to provide an easily-graded electrostatics assessment that can potentially be implemented to investigate student learning on a large scale. We show that student performance on the new multiple-response version exhibits a significant degree of consistency with performance on the free-response version, and that it continues to provide significant insight into student reasoning and student difficulties. Moreover, we demonstrate that the new assessment is both valid and reliable using data from upper-division physics students at multiple institutions. Overall, the work described in this thesis represents a significant contribution to the methodological tools available to researchers and instructors interested in improving student learning at the upper-division level.

Structures and Acoustics Division

NASA Technical Reports Server (NTRS)

Acquaviva, Cynthia S.

1999-01-01

The Structures and Acoustics Division of NASA Glenn Research Center is an international leader in rotating structures, mechanical components, fatigue and fracture, and structural aeroacoustics. Included are disciplines related to life prediction and reliability, nondestructive evaluation, and mechanical drive systems. Reported are a synopsis of the work and accomplishments reported by the Division during the 1996 calendar year. A bibliography containing 42 citations is provided.

49 CFR 174.112 - Loading Division 1.3 materials and Division 1.2 (explosive) materials (Also see § 174.101).

Code of Federal Regulations, 2012 CFR

2012-10-01

... materials and Division 1.2 (explosive) materials may not be loaded, transported or stored in a rail car equipped with any type of lighted heater or open-flame device, or in a rail car equipped with any apparatus or mechanism utilizing an internal combustion engine in its operation. (b) Except as provided in...

49 CFR 174.112 - Loading Division 1.3 materials and Division 1.2 (explosive) materials (Also see § 174.101).

Code of Federal Regulations, 2014 CFR

2014-10-01

... materials and Division 1.2 (explosive) materials may not be loaded, transported or stored in a rail car equipped with any type of lighted heater or open-flame device, or in a rail car equipped with any apparatus or mechanism utilizing an internal combustion engine in its operation. (b) Except as provided in...

49 CFR 174.112 - Loading Division 1.3 materials and Division 1.2 (explosive) materials (Also see § 174.101).

Code of Federal Regulations, 2013 CFR

2013-10-01

... materials and Division 1.2 (explosive) materials may not be loaded, transported or stored in a rail car equipped with any type of lighted heater or open-flame device, or in a rail car equipped with any apparatus or mechanism utilizing an internal combustion engine in its operation. (b) Except as provided in...

49 CFR 174.112 - Loading Division 1.3 materials and Division 1.2 (explosive) materials (Also see § 174.101).

Code of Federal Regulations, 2011 CFR

2011-10-01

... materials and Division 1.2 (explosive) materials may not be loaded, transported or stored in a rail car equipped with any type of lighted heater or open-flame device, or in a rail car equipped with any apparatus or mechanism utilizing an internal combustion engine in its operation. (b) Except as provided in...

49 CFR 174.112 - Loading Division 1.3 materials and Division 1.2 (explosive) materials (Also see § 174.101).

Code of Federal Regulations, 2010 CFR

2010-10-01

... materials and Division 1.2 (explosive) materials may not be loaded, transported or stored in a rail car equipped with any type of lighted heater or open-flame device, or in a rail car equipped with any apparatus or mechanism utilizing an internal combustion engine in its operation. (b) Except as provided in...

A reliability analysis tool for SpaceWire network

NASA Astrophysics Data System (ADS)

Zhou, Qiang; Zhu, Longjiang; Fei, Haidong; Wang, Xingyou

2017-04-01

A SpaceWire is a standard for on-board satellite networks as the basis for future data-handling architectures. It is becoming more and more popular in space applications due to its technical advantages, including reliability, low power and fault protection, etc. High reliability is the vital issue for spacecraft. Therefore, it is very important to analyze and improve the reliability performance of the SpaceWire network. This paper deals with the problem of reliability modeling and analysis with SpaceWire network. According to the function division of distributed network, a reliability analysis method based on a task is proposed, the reliability analysis of every task can lead to the system reliability matrix, the reliability result of the network system can be deduced by integrating these entire reliability indexes in the matrix. With the method, we develop a reliability analysis tool for SpaceWire Network based on VC, where the computation schemes for reliability matrix and the multi-path-task reliability are also implemented. By using this tool, we analyze several cases on typical architectures. And the analytic results indicate that redundancy architecture has better reliability performance than basic one. In practical, the dual redundancy scheme has been adopted for some key unit, to improve the reliability index of the system or task. Finally, this reliability analysis tool will has a directive influence on both task division and topology selection in the phase of SpaceWire network system design.

Finding Reliable Health Information Online

MedlinePlus

Skip to main content Finding Reliable Health Information Online Enter Search Term(s): Español Research Funding An Overview Bioinformatics Current Grants Education and Training Funding Extramural Research News Features Funding Divisions Funding ...

Dynamic Stability of Maglev Systems,

DTIC Science & Technology

1992-04-01

AD-A259 178 ANL-92/21 Materials and Components Dynamic Stability of Technology Division Materials and Components Maglev Systems Technology Division...of Maglev Systems Y. Cai, S. S. Chen, and T. M. Mulcahy Materials and Components Technology Division D. M. Rote Center for Transportation Research...of Maglev System with L-Shaped Guideway ......................................... 6 3 Stability of M aglev System s

Metals and Ceramics Division progress report for period ending December 31, 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Craig, D.F.; Weir, J.R. Jr.

1993-04-01

This report provides a brief overview of the activities and accomplishments of the division, whose purpose is to provide technical support, primarily in the area of high-temperature materials, for the various technologies being developed by US DOE. Activities range from basic research to industrial research and technology transfer. The division (and the report) is divided into the following: Engineering materials, high-temperature materials, materials science, ceramics, nuclear fuel materials, program activities, collaborative research facilities and technology transfer, and educational programs.

49 CFR 176.605 - Care following leakage or sifting of Division 2.3 (poisonous gas) and Division 6.1 (poisonous...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Care following leakage or sifting of Division 2.3... Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF... (Poisonous Gas) and Division 6.1 (Poisonous) Materials § 176.605 Care following leakage or sifting of...

49 CFR 176.605 - Care following leakage or sifting of Division 2.3 (poisonous gas) and Division 6.1 (poisonous...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false Care following leakage or sifting of Division 2.3... Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF... (Poisonous Gas) and Division 6.1 (Poisonous) Materials § 176.605 Care following leakage or sifting of...

18 CFR 376.204 - Delegation of Commission authority during emergency conditions.

Code of Federal Regulations, 2014 CFR

2014-04-01

... the Office of Energy Projects; (v) Director of the Office of Electric Reliability; (vi) Director of... Energy Projects, in order of seniority; (x) Deputy Directors, Office of Electric Reliability, in order of... Energy Projects; Assistant Directors and Division heads, Office of Electric Reliability; Deputy Associate...

Reliability Modeling of Double Beam Bridge Crane

NASA Astrophysics Data System (ADS)

Han, Zhu; Tong, Yifei; Luan, Jiahui; Xiangdong, Li

2018-05-01

This paper briefly described the structure of double beam bridge crane and the basic parameters of double beam bridge crane are defined. According to the structure and system division of double beam bridge crane, the reliability architecture of double beam bridge crane system is proposed, and the reliability mathematical model is constructed.

Materials Division research and technology accomplishments for FY 87 and plans for FY 88

NASA Technical Reports Server (NTRS)

Brinkley, Kay L.

1988-01-01

The research program of the Materials Division is presented as FY 87 accomplishments and FY 88 plans. The accomplishments for each Branch are highlighted and plans are outlined. Publications of the Division are included by Branch. This material will be useful in program coordination with other government organizations, universities, and industries in areas of mutual interest.

Materials Division research and technology accomplishments for FY 89 and plans for FY 90

NASA Technical Reports Server (NTRS)

Brinkley, Kay L.

1990-01-01

The research program of the Materials Division is presented as FY-89 accomplishments and FY-90 plans. The accomplishments for each Branch are highlighted and plans are outlined. Publications of the Division are included by Branch. This material will be useful in program coordination with other government organizations, universities, and industries in areas of mutual interest.

Materials Division research and technical accomplishments for FY 1988 and plans for FY 1989

NASA Technical Reports Server (NTRS)

Brinkley, Kay L.

1989-01-01

The research program of the Materials Division is presented as FY-88 accomplishments and FY-89 plans. The accomplishments for each Branch are highlighted and plans are outlined. Publications of the Division are included by Branch. This material is useful in program coordination with other government organizations, universities, and industry in areas of mutual interest.

Structures and Acoustics Division

NASA Technical Reports Server (NTRS)

Acquaviva, Cynthia S.

2001-01-01

The Structures and Acoustics Division of the NASA Glenn Research Center is an international leader in rotating structures, mechanical components, fatigue and fracture, and structural aeroacoustics. Included in this report are disciplines related to life prediction and reliability, nondestructive evaluation, and mechanical drive systems. Reported is a synopsis of the work and accomplishments completed by the Division during the 1997, 1998, and 1999 calendar years. A bibliography containing 93 citations is provided.

Control of Anion in Corporation in the Molecular Beam Epitaxy of Ternary Antimonide Superlattices for Very Long Wavelength Infrared Detection (Postprint)

DTIC Science & Technology

2015-10-01

ASSIGNED DISTRIBUTION STATEMENT. //Signature// //Signature// GAIL J. BROWN DIANA M. CARLIN, Chief Nanoelectronic ...Materials Branch Nanoelectronic Materials Branch Functional Materials Division Functional Materials Division //Signature// KAREN

49 CFR 176.400 - Stowage of Division 1.5, Class 4 (flammable solids) and Class 5 (oxidizers and organic peroxides...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false Stowage of Division 1.5, Class 4 (flammable solids... Solids), Class 5 (Oxidizers and Organic Peroxides), and Division 1.5 Materials § 176.400 Stowage of Division 1.5, Class 4 (flammable solids) and Class 5 (oxidizers and organic peroxides) materials. (a) Class...

Space Technology For Tuna Boats

NASA Technical Reports Server (NTRS)

1977-01-01

Freshly-caught tuna is stored below decks in wells cooled to about zero degrees by brine circulated through a refrigerating system. The wells formerly were insulated by cork or fiberglass, but both materials were subject to deterioration; cork, for instance, needs replacement every three years. The Campbell Machine Division of Campbell Industries, San Diego, which manufactures and repairs large boats for the commercial fishing industry, was looking for a better way to insulate tuna storage wells. Learning of the Rockwell technique, Campbell contracted for a test installation on one boat, then bought its own equipment and adopted the spray-foam procedure for their boats. The foam hardens after application. It not only is a superior insulator, it also is considerably lighter and easier to apply. Fishing industry spokesmen say that foam insulation is far more reliable, efficient and economical than prior techniques. More than 40 foam-insulated tuna boats, ranging in cost from $1 million to $4 million, have been built and sold. Principal customers are Ralston Purina's Van Camp Seafood Division and Star-Kist Inc.

Publications - GMC 267 | Alaska Division of Geological & Geophysical

Science.gov Websites

and Facilities Staff Seismic and Well Data Data Reports Contact Us Frequently Asked Questions Ask a well materials Authors: Unknown Publication Date: 1996 Publisher: Alaska Division of Geological & Alaska North Slope well materials: Alaska Division of Geological & Geophysical Surveys Geologic

76 FR 65212 - Henkel Corporation, Currently Known as Henkel Electronic Materials, LLC, Electronic Adhesives...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-20

..., Currently Known as Henkel Electronic Materials, LLC, Electronic Adhesives Division, Including On-Site Leased..., Electronic Adhesives Division, including on-site leased workers from Aerotek Professional Services, Billerica..., Electronic Adhesives Division had their wages reported under a separate unemployment insurance (UI) tax...

75 FR 82142 - Information Collection Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-29

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Foster, Standards and Rulemaking Division (PHH-12), Pipeline and Hazardous Materials Safety... Division (PHH-12), Pipeline and Hazardous Materials Safety Administration, 1200 New Jersey Avenue, SE...

Cost-effective and monitoring-active technique for TDM-passive optical networks

NASA Astrophysics Data System (ADS)

Chi, Chang-Chia; Lin, Hong-Mao; Tarn, Chen-Wen; Lin, Huang-Liang

2014-08-01

A reliable, detection-active and cost-effective method which employs the hello and heartbeat signals for branched node distinguishing to monitor fiber fault in any branch of distribution fibers of a time division multiplexing passive optical network (TDM-PON) is proposed. With this method, the material cost of building an optical network monitor system for a TDM-PON with 168 ONUs and the time of identifying a multiple branch faults is significantly reduced in a TDM-PON system of any scale. A fault location in a 1 × 32 TDM-PON system using this method to identify the fault branch is demonstrated.

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Synthesis Condensed Matter and Materials Physics Scattering and Instrumentation Science Centers Center for Berkeley Lab Berkeley Lab A-Z Index Phone Book Jobs Search DOE Search MSD Go MSD - Materials Sciences Division About Organization Contact Research Core Programs Materials Discovery, Design and

Competing Biases in Mental Arithmetic: When Division Is More and Multiplication Is Less.

PubMed

Shaki, Samuel; Fischer, Martin H

2017-01-01

Mental arithmetic exhibits various biases. Among those is a tendency to overestimate addition and to underestimate subtraction outcomes. Does such "operational momentum" (OM) also affect multiplication and division? Twenty-six adults produced lines whose lengths corresponded to the correct outcomes of multiplication and division problems shown in symbolic format. We found a reliable tendency to over-estimate division outcomes, i.e., reverse OM. We suggest that anchoring on the first operand (a tendency to use this number as a reference for further quantitative reasoning) contributes to cognitive biases in mental arithmetic.

49 CFR 387.5 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Zone A or Division 6.1, Packing Group I, Hazard Zone A materials)—the transportation, as cargo, of any Division 2.3, Hazard Zone A, or Division 6.1, packing Group I, Hazard Zone A material, in any quantity..., the District of Columbia, Puerto Rico, the Virgin Islands, American Samoa, Guam, and the Northern...

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Investigators Division Staff Facilities and Centers Staff Jobs Safety Personnel Resources Committees In Case of ? Click Here! Commitment to Safety at MSD In the Materials Sciences Division, our mission is to do world -class science in a safe environment. We proudly support a strong safety culture in which all staff and

Novel cost controlled materials and processing for primary structures

NASA Technical Reports Server (NTRS)

Dastin, S. J.

1993-01-01

Textile laminates, developed a number of years ago, have recently been shown to be applicable to primary aircraft structures for both small and large components. Such structures have the potential to reduce acquisition costs but require advanced automated processing to keep costs controlled while verifying product reliability and assuring structural integrity, durability and affordable life-cycle costs. Recently, resin systems and graphite-reinforced woven shapes have been developed that have the potential for improved RTM processes for aircraft structures. Ciba-Geigy, Brochier Division has registered an RTM prepreg reinforcement called 'Injectex' that has shown effectivity for aircraft components. Other novel approaches discussed are thermotropic resins producing components by injection molding and ceramic polymers for long-duration hot structures. The potential of such materials and processing will be reviewed along with initial information/data available to date.

Longitudinal Improvement in Balance Error Scoring System Scores among NCAA Division-I Football Athletes.

PubMed

Mathiasen, Ross; Hogrefe, Christopher; Harland, Kari; Peterson, Andrew; Smoot, M Kyle

2018-02-15

The Balance Error Scoring System (BESS) is a commonly used concussion assessment tool. Recent studies have questioned the stability and reliability of baseline BESS scores. The purpose of this longitudinal prospective cohort study is to examine differences in yearly baseline BESS scores in athletes participating on an NCAA Division-I football team. NCAA Division-I freshman football athletes were videotaped performing the BESS test at matriculation and after 1 year of participation in the football program. Twenty-three athletes were enrolled in year 1 of the study, and 25 athletes were enrolled in year 2. Those athletes enrolled in year 1 were again videotaped after year 2 of the study. The paired t-test was used to assess for change in score over time for the firm surface, foam surface, and the cumulative BESS score. Additionally, inter- and intrarater reliability values were calculated. Cumulative errors on the BESS significantly decreased from a mean of 20.3 at baseline to 16.8 after 1 year of participation. The mean number of errors following the second year of participation was 15.0. Inter-rater reliability for the cumulative score ranged from 0.65 to 0.75. Intrarater reliability was 0.81. After 1 year of participation, there is a statistically and clinically significant improvement in BESS scores in an NCAA Division-I football program. Although additional improvement in BESS scores was noted after a second year of participation, it did not reach statistical significance. Football athletes should undergo baseline BESS testing at least yearly if the BESS is to be optimally useful as a diagnostic test for concussion.

49 CFR 173.124 - Class 4, Divisions 4.1, 4.2 and 4.3-Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... material must be determined using the testing protocol from Figure 14.2 (Flow Chart for Assigning Self... HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS... Assignments and Exceptions for Hazardous Materials Other Than Class 1 and Class 7 § 173.124 Class 4, Divisions...

Solid State Division progress report for period ending March 31, 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, P.H.; Hinton, L.W.

1997-12-01

This report covers research progress in the Solid State Division from April 1, 1995, through March 31, 1997. During this period, the division conducted a broad, interdisciplinary materials research program in support of Department of Energy science and technology missions. The report includes brief summaries of research activities in condensed matter theory, neutron scattering, synthesis and characterization of materials, ion beam and laser processing, and the structure of solids and surfaces. An addendum includes listings of division publications and professional activities.

Laboratory directed research and development program FY 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-03-01

This report compiles the annual reports of Laboratory Directed Research and Development projects supported by the Berkeley Lab. Projects are arranged under the following topical sections: (1) Accelerator and fusion research division; (2) Chemical sciences division; (3) Computing Sciences; (4) Earth sciences division; (5) Environmental energy technologies division; (6) life sciences division; (7) Materials sciences division; (8) Nuclear science division; (9) Physics division; (10) Structural biology division; and (11) Cross-divisional. A total of 66 projects are summarized.

Space shuttle propellant constitutive law verification tests

NASA Technical Reports Server (NTRS)

Thompson, James R.

1995-01-01

As part of the Propellants Task (Task 2.0) on the Solid Propulsion Integrity Program (SPIP), a database of material properties was generated for the Space Shuttle Redesigned Solid Rocket Motor (RSRM) PBAN-based propellant. A parallel effort on the Propellants Task was the generation of an improved constitutive theory for the PBAN propellant suitable for use in a finite element analysis (FEA) of the RSRM. The outcome of an analysis with the improved constitutive theory would be more reliable prediction of structural margins of safety. The work described in this report was performed by Materials Laboratory personnel at Thiokol Corporation/Huntsville Division under NASA contract NAS8-39619, Mod. 3. The report documents the test procedures for the refinement and verification tests for the improved Space Shuttle RSRM propellant material model, and summarizes the resulting test data. TP-H1148 propellant obtained from mix E660411 (manufactured February 1989) which had experienced ambient igloo storage in Huntsville, Alabama since January 1990, was used for these tests.

Lewis materials research and technology: An overview

NASA Technical Reports Server (NTRS)

Grisaffe, Salvatore J.

1987-01-01

The Materials Division at the Lewis Research Center has a long record of contributions to both materials and process technology as well as to the understanding of key high-temperature phenomena. An overview of the division staff, facilities, past history, recent progress, and future interests is presented.

NASA. Lewis Research Center materials research and technology: An overview

NASA Technical Reports Server (NTRS)

Grisaffe, Salvatore J.

1990-01-01

The Materials Division at the Lewis Research Center has a long record of contributions to both materials and process technology as well as to the understanding of key high-temperature phenomena. This paper overviews the division staff, facilities, past history, recent progress, and future interests.

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Berkeley Lab Berkeley Lab A-Z Index Phone Book Jobs Search DOE Search MSD Go MSD - Materials Investigators Division Staff Facilities and Centers Staff Jobs Safety Personnel Resources Committees In Case of

Synthesis as the heart of New Materials Physics

NASA Astrophysics Data System (ADS)

Canfield, Paul

Humanity needs to find the materials that will ease is growing needs for reliable, renewable, clean, energy and/or will allow for greater insight into the mysteries of collective and, in some cases, emergent states. The design, discovery and growth of novel materials is heart of the research effort that will, hopefully address these needs. In this talk I will present a broad overview of New Materials Physics and describe how a practitioner can go from staring at the periodic table to deciding what ``the next growth will be''. I will present and discuss the three basic motivations for making a growth: wanting a specific compound; wanting a specific ground state; searching for known and unknown unknowns. Materials discussed will span superconductors, quasicrystals, heavy fermions, fragile magnets, topological electronic systems, local moment magnets and a few lost puppies. The goal of this talk is to inspire and entertain, any resemblance to persons living or dead is coincidental. This work was supported by the U.S. Dept. of Energy, Basic Energy Science, Division of Materials Sciences and Engineering under Contract No. DE-AC02-07CH11358 as well as by the Gordon and Betty Moore Foundations EPiQS Initiative through Grant GBMF4411.

Plant and Industry Experience. MAS-122. Waste Isolation Division (WID). Management and Supervisor Training (MAST) Program.

ERIC Educational Resources Information Center

Westinghouse Electric Corp., Carlsbad, NM.

This learning module, which is part of a management and supervisor training program for managers and supervisors employed at the Department of Energy's Waste Isolation Division, is designed to prepare trainees to use plant and industry experience to improve plant safety and reliability. The following topics are covered in the module's individual…

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Postdoc Forum Research Highlights Awards Publications Database Events Calendar Newsletter Archive People ; Finance Templates Travel One-Stop Investigators Division Staff Facilities and Centers Staff Jobs People Division, please use the links here. An outline of the Division structure is available at the Organization

Color-Tunable Mirrors Based on Electrically Regulated Bandwidth Broadening in Polymer-Stabilized Cholesteric Liquid Crystals (Postprint)

DTIC Science & Technology

2014-10-01

DISTRIBUTION STATEMENT. //Signature// //Signature// TIMOTHY J. WHITE CHRISTOPHER D. BREWER, Chief Photonic Materials Branch... Photonic Materials Branch Functional Materials Division Functional Materials Division //Signature// TIMOTHY J. BUNNING, Chief Functional...LIQUID CRYSTALS (POSTPRINT) 5a. CONTRACT NUMBER FA8650-09-D-5434-0009 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 62102F 6. AUTHOR(S

Colorado Upper-Division Electrostatics diagnostic: A conceptual assessment for the junior level

NASA Astrophysics Data System (ADS)

Chasteen, Stephanie V.; Pepper, Rachel E.; Caballero, Marcos D.; Pollock, Steven J.; Perkins, Katherine K.

2012-12-01

As part of an effort to systematically improve our junior-level E&M I course, we have developed a tool to assess student conceptual learning of electrostatics at the upper division. Together with a group of physics faculty, we established a list of learning goals for the course that, with results from student observations and interviews, served as a guide in creating the Colorado Upper-Division Electrostatics (CUE) assessment. The result is a 17-question open-ended post-test diagnostic (with an optional 7-question pretest) and an accompanying grading rubric. We present measures of the validation and reliability of the instrument and grading rubric, plus results from 535 students in both standard and interactive-engagement courses across seven institutions as a baseline for the instrument. Overall, we find that the CUE is a valid and reliable measure, and the data herein are intended to be of use to researchers and faculty interested in using the CUE to measure student learning.

Solid State Division progress report for period ending September 30, 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, P.H.; Hinton, L.W.

1994-08-01

This report covers research progress in the Solid State Division from April 1, 1992, to September 30, 1993. During this period, the division conducted a broad, interdisciplinary materials research program with emphasis on theoretical solid state physics, neutron scattering, synthesis and characterization of materials, ion beam and laser processing, and the structure of solids and surfaces. This research effort was enhanced by new capabilities in atomic-scale materials characterization, new emphasis on the synthesis and processing of materials, and increased partnering with industry and universities. The theoretical effort included a broad range of analytical studies, as well as a new emphasismore » on numerical simulation stimulated by advances in high-performance computing and by strong interest in related division experimental programs. Superconductivity research continued to advance on a broad front from fundamental mechanisms of high-temperature superconductivity to the development of new materials and processing techniques. The Neutron Scattering Program was characterized by a strong scientific user program and growing diversity represented by new initiatives in complex fluids and residual stress. The national emphasis on materials synthesis and processing was mirrored in division research programs in thin-film processing, surface modification, and crystal growth. Research on advanced processing techniques such as laser ablation, ion implantation, and plasma processing was complemented by strong programs in the characterization of materials and surfaces including ultrahigh resolution scanning transmission electron microscopy, atomic-resolution chemical analysis, synchrotron x-ray research, and scanning tunneling microscopy.« less

Berkeley Lab - Materials Sciences Division

Science.gov Websites

sponsors. Distinguish by scope/specific aspects of research; or by institution; or by individual. Example Sciences Division About Organization Contact Research Core Programs Materials Discovery, Design and Postdoc Forum Research Highlights Awards Publications Database Events Calendar Newsletter Archive People

Draftsmen Create a Blade Template in the Materials and Stresses Building

NASA Image and Video Library

1953-04-21

Draftsmen in the Materials and Stresses Building at the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory create a template for a compressor using actual compressor blades. The Compressor and Turbine Division contained four sections of researchers dedicated to creating better engine components. The Materials and Thermodynamics Division studied the strength, durability, heat transfer characteristics, and physical composition of various materials. The two divisions were important to the research and development of new aircraft engines. The constant battle to increase the engine’s thrust while decreasing its overall weight resulted in additional stress on jet engine components, particularly compressors. As speed and maneuverability were enhanced, the strain on the engines and inlets grew. For decades NACA Lewis researchers continually sought to improve compressor blade design, develop stronger composite materials, and minimize flutter and inlet distortions.

Alaska Plant Materials Center | Division of Agriculture

Science.gov Websites

Alaska Plant Materials Center Serving Alaska's needs in the production of native plants and traditional Division of Agriculture Grants Alaska Agriculture Statistics Annual Overview Invasive Plants Invasive Plants Program Invasives News Plant Profiles Canada thistle Elodea European Bird Cherry Giant hogweed

49 CFR 174.14 - Movements to be expedited.

Code of Federal Regulations, 2012 CFR

2012-10-01

... available train. (b) A tank car loaded with any Division 2.1 (flammable gas), Division 2.3 (poisonous gas) or Class 3 (flammable liquid) material, may not be received and held at any point, subject to... Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY...

49 CFR 174.14 - Movements to be expedited.

Code of Federal Regulations, 2011 CFR

2011-10-01

... available train. (b) A tank car loaded with any Division 2.1 (flammable gas), Division 2.3 (poisonous gas) or Class 3 (flammable liquid) material, may not be received and held at any point, subject to... Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY...

49 CFR 174.14 - Movements to be expedited.

Code of Federal Regulations, 2014 CFR

2014-10-01

... available train. (b) A tank car loaded with any Division 2.1 (flammable gas), Division 2.3 (poisonous gas) or Class 3 (flammable liquid) material, may not be received and held at any point, subject to... Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY...

49 CFR 174.14 - Movements to be expedited.

Code of Federal Regulations, 2013 CFR

2013-10-01

... available train. (b) A tank car loaded with any Division 2.1 (flammable gas), Division 2.3 (poisonous gas) or Class 3 (flammable liquid) material, may not be received and held at any point, subject to... Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY...

Lightning Talks 2015: Theoretical Division

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shlachter, Jack S.

2015-11-25

This document is a compilation of slides from a number of student presentations given to LANL Theoretical Division members. The subjects cover the range of activities of the Division, including plasma physics, environmental issues, materials research, bacterial resistance to antibiotics, and computational methods.

49 CFR 174.615 - Cleaning cars.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 2 2012-10-01 2012-10-01 false Cleaning cars. 174.615 Section 174.615... Requirements for Division 6.1 (Poisonous) Materials § 174.615 Cleaning cars. (a) [Reserved] (b) After Division 6.1 (poisonous) materials are unloaded from a rail car, that car must be thoroughly cleaned unless...

49 CFR 174.615 - Cleaning cars.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 2 2013-10-01 2013-10-01 false Cleaning cars. 174.615 Section 174.615... Requirements for Division 6.1 (Poisonous) Materials § 174.615 Cleaning cars. (a) [Reserved] (b) After Division 6.1 (poisonous) materials are unloaded from a rail car, that car must be thoroughly cleaned unless...

49 CFR 174.615 - Cleaning cars.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false Cleaning cars. 174.615 Section 174.615... Requirements for Division 6.1 (Poisonous) Materials § 174.615 Cleaning cars. (a) [Reserved] (b) After Division 6.1 (poisonous) materials are unloaded from a rail car, that car must be thoroughly cleaned unless...

49 CFR 174.615 - Cleaning cars.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 2 2014-10-01 2014-10-01 false Cleaning cars. 174.615 Section 174.615... Requirements for Division 6.1 (Poisonous) Materials § 174.615 Cleaning cars. (a) [Reserved] (b) After Division 6.1 (poisonous) materials are unloaded from a rail car, that car must be thoroughly cleaned unless...

49 CFR 174.615 - Cleaning cars.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Cleaning cars. 174.615 Section 174.615... Requirements for Division 6.1 (Poisonous) Materials § 174.615 Cleaning cars. (a) [Reserved] (b) After Division 6.1 (poisonous) materials are unloaded from a rail car, that car must be thoroughly cleaned unless...

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Investigators Division Staff Facilities and Centers Staff Jobs Safety Personnel Resources Committees In Case of Materials Safety Bulletins Archive September 2016 - Hazardous Waste [PDF] July 2016 - When Should You Report - Include Safety Training in On-The-Job Training [PDF] July 2009 - Eye Injury from Corrosive Organic Solvent

Collaborative Research and Development (CR&D) III Task Order 0077: Fundamental Studies of Plasticity, Interfacial Boundaries and Liquid Metals

DTIC Science & Technology

2013-06-01

Interfacial Boundaries and Liquid Metals Dallas Trinkle Independent Contractor JUNE 2013 Final Report Approved for public...SIGNATURE//_________________ CHRISTOPHER WOODWARD, Project Engineer DANIEL EVANS, Chief Metals Branch Metals Branch Structural ...Materials Division Structural Materials Division ____//SIGNATURE//___________________ ROBERT T. MARSHALL, Deputy Chief

75 FR 44817 - Notice of Availability of Uranium Enrichment Fuel Cycle Facility Inspection Reports Regarding...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-29

... Uranium Enrichment Fuel Cycle Facility Inspection Reports Regarding Louisiana Energy Services, National... Enrichment Branch, Division of Fuel Cycle Safety and Safeguards, Office of Nuclear Material Safety and... Enrichment Branch, Division of Fuel Cycle Safety and Safeguards, Office of Nuclear Material Safety and...

49 CFR 176.410 - Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures. 176.410 Section 176.410 Transportation Other Regulations Relating to... nitrate and ammonium nitrate mixtures. (a) This section prescribes requirements to be observed with...

49 CFR 176.410 - Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 2 2012-10-01 2012-10-01 false Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures. 176.410 Section 176.410 Transportation Other Regulations Relating to... nitrate and ammonium nitrate mixtures. (a) This section prescribes requirements to be observed with...

49 CFR 176.410 - Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 2 2013-10-01 2013-10-01 false Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures. 176.410 Section 176.410 Transportation Other Regulations Relating to... nitrate and ammonium nitrate mixtures. (a) This section prescribes requirements to be observed with...

49 CFR 176.410 - Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 2 2014-10-01 2014-10-01 false Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures. 176.410 Section 176.410 Transportation Other Regulations Relating to... nitrate and ammonium nitrate mixtures. (a) This section prescribes requirements to be observed with...

New Concepts in Electromagnetic Materials and Antennas

DTIC Science & Technology

2015-01-01

Bae-Ian Wu Antennas & Electromagnetics Technology Branch Multispectral Sensing & Detection Division JANUARY 2015 Final Report...Signature// //Signature// BRADLEY A. KRAMER, Program Manager TONY C. KIM, Branch Chief Antenna & Electromagnetic Technology ...Branch Antenna & Electromagnetic Technology Branch Multispectral Sensing & Detection Division Multispectral Sensing & Detection Division

Tag-to-Tag Interference Suppression Technique Based on Time Division for RFID.

PubMed

Khadka, Grishma; Hwang, Suk-Seung

2017-01-01

Radio-frequency identification (RFID) is a tracking technology that enables immediate automatic object identification and rapid data sharing for a wide variety of modern applications using radio waves for data transmission from a tag to a reader. RFID is already well established in technical areas, and many companies have developed corresponding standards and measurement techniques. In the construction industry, effective monitoring of materials and equipment is an important task, and RFID helps to improve monitoring and controlling capabilities, in addition to enabling automation for construction projects. However, on construction sites, there are many tagged objects and multiple RFID tags that may interfere with each other's communications. This reduces the reliability and efficiency of the RFID system. In this paper, we propose an anti-collision algorithm for communication between multiple tags and a reader. In order to suppress interference signals from multiple neighboring tags, the proposed algorithm employs the time-division (TD) technique, where tags in the interrogation zone are assigned a specific time slot so that at every instance in time, a reader communicates with tags using the specific time slot. We present representative computer simulation examples to illustrate the performance of the proposed anti-collision technique for multiple RFID tags.

Publications - AR 2005 | Alaska Division of Geological & Geophysical

Science.gov Websites

Publications Geologic Materials Center General Information Inventory Monthly Report Hours and Location Policy Report Authors: DGGS Staff Publication Date: Feb 2006 Publisher: Alaska Division of Geological & Geological & Geophysical Surveys Annual Report: Alaska Division of Geological & Geophysical Surveys

Publications - AR 2009 | Alaska Division of Geological & Geophysical

Science.gov Websites

Publications Geologic Materials Center General Information Inventory Monthly Report Hours and Location Policy Report Authors: DGGS Staff Publication Date: Jan 2010 Publisher: Alaska Division of Geological & Geological & Geophysical Surveys Annual Report: Alaska Division of Geological & Geophysical Surveys

49 CFR 174.81 - Segregation of hazardous materials.

Code of Federal Regulations, 2010 CFR

2010-10-01

... X O O X O Organic peroxides 5.2 X X X X O X O Poisonous liquids PG I Zone A 6.1 X X O X O X X X X X... fertilizer may be loaded or stored with Division 1.1 (explosive) or Division 1.5 materials. (6) When the...

34 CFR Appendix C to Part 300 - National Instructional Materials Accessibility Standard (NIMAS)

Code of Federal Regulations, 2010 CFR

2010-07-01

... NIMAS is to help increase the availability and timely delivery of print instructional materials in... appendices, glossaries, bibliographies, and indices. It follows the of the book. level1 The highest-level container of major divisions of a book. Used in , , and to mark the largest divisions of the book (usually...

Solid State Division progress report for period ending March 31, 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, P.H.; Hinton, L.W.

1992-09-01

During this period, the division conducted a broad, interdisciplinary materials research program with emphasis on theoretical solid state physics, superconductivity, neutron scattering, synthesis and characterization of materials, ion beam and laser processing, and the structure of solids and surfaces. The High Flux Isotope Reactor was returned to full operation.

Reliability Analysis and Modeling of ZigBee Networks

NASA Astrophysics Data System (ADS)

Lin, Cheng-Min

The architecture of ZigBee networks focuses on developing low-cost, low-speed ubiquitous communication between devices. The ZigBee technique is based on IEEE 802.15.4, which specifies the physical layer and medium access control (MAC) for a low rate wireless personal area network (LR-WPAN). Currently, numerous wireless sensor networks have adapted the ZigBee open standard to develop various services to promote improved communication quality in our daily lives. The problem of system and network reliability in providing stable services has become more important because these services will be stopped if the system and network reliability is unstable. The ZigBee standard has three kinds of networks; star, tree and mesh. The paper models the ZigBee protocol stack from the physical layer to the application layer and analyzes these layer reliability and mean time to failure (MTTF). Channel resource usage, device role, network topology and application objects are used to evaluate reliability in the physical, medium access control, network, and application layers, respectively. In the star or tree networks, a series system and the reliability block diagram (RBD) technique can be used to solve their reliability problem. However, a division technology is applied here to overcome the problem because the network complexity is higher than that of the others. A mesh network using division technology is classified into several non-reducible series systems and edge parallel systems. Hence, the reliability of mesh networks is easily solved using series-parallel systems through our proposed scheme. The numerical results demonstrate that the reliability will increase for mesh networks when the number of edges in parallel systems increases while the reliability quickly drops when the number of edges and the number of nodes increase for all three networks. More use of resources is another factor impact on reliability decreasing. However, lower network reliability will occur due to network complexity, more resource usage and complex object relationship.

Teaching Cell Division: Basics and Recommendations.

ERIC Educational Resources Information Center

Smith, Mike U.; Kindfield, Ann C. H.

1999-01-01

Presents a concise overview of cell division that includes only the essential concepts necessary for understanding genetics and evolution. Makes recommendations based on published research and teaching experiences that can be used to judge the merits of potential activities and materials for teaching cell division. Makes suggestions regarding the…

49 CFR 176.400 - Stowage of Division 1.5, Class 4 (flammable solids) and Class 5 (oxidizers and organic peroxides...

Code of Federal Regulations, 2010 CFR

2010-10-01

... reasonably practicable and be stowed away from all sources of heat and ignition. (b) Division 5.2 (organic peroxide) material must be stowed away from living quarters or access to them. Division 5.2 (organic...

Publications - GMC 85 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

and Facilities Staff Seismic and Well Data Data Reports Contact Us Frequently Asked Questions Ask a ) well Authors: Unknown Publication Date: 1988 Publisher: Alaska Division of Geological & Geophysical (Orion) well: Alaska Division of Geological & Geophysical Surveys Geologic Materials Center Data

Publications - GMC 89 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

and Facilities Staff Seismic and Well Data Data Reports Contact Us Frequently Asked Questions Ask a ) well Authors: Unknown Publication Date: 1988 Publisher: Alaska Division of Geological & Geophysical (Mars) well: Alaska Division of Geological & Geophysical Surveys Geologic Materials Center Data

First-principles studiesy of the order-disorder phase transition in FeCo using Wang-Landau Monte-Carlo method

NASA Astrophysics Data System (ADS)

Pei, Zongrui; Eisenbach, Markus; Stocks, G. Malcolm

Simulating order-disorder phase transitions in magnetic materials requires the accurate treatment of both the atomic and magnetic interactions, which span a vast configuration space. Using FeCo as a prototype system, we demonstrate that this can be addressed by combining the Locally Self-consistent Multiple Scattering (LSMS) method with the Wang-Landau (WL) Monte-Carlo algorithm. Fe-Co based materials are interesting magnetic materials but a reliable phase diagram of the binary Fe-Co system is still difficult to obtain. Using the combined WL-LSMS method we clarify the existence of the disordered A2 phase and predict the Curie temperature between it and the ordered B2 phase. The WL-LSMS method is readily applicable to the study of second-order phase transitions in other binary and multi-component alloys, thereby providing a means to the direct simulation of order-disorder phase transitions in complex alloys without need of intervening classical model Hamiltonians. We also demonstrate the capability of our method to guide the design of new magnetic materials. This research was supported by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Science and Engineering Division and it used Oak Ridge Leadership Computing Facility resources at Oak Ridge National Laboratory.

New Directions in NASA's Materials Science Program

NASA Technical Reports Server (NTRS)

Gillies, Donald C.; Whitaker, Ann F. (Technical Monitor)

2001-01-01

Recently, NASA's Microgravity Research Division was re-aligned to match the Agency's increasing awareness of the importance of biological and nano-structural sciences. The Division has become the Physical Sciences Research section within the newly created Office of Biological and Physical Research. Within materials science and in the last few years, new programs aimed at biomaterials have been initiated. Results from these programs and also new research pertaining to materials for radiation protection will be discussed.

77 FR 19077 - Adoption of Updated EDGAR Filer Manual

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-30

... update contact Walter Hamscher, at (202) 551-5397; in the Division of Trading and Markets for questions... Management and Division of Trading and Markets filer support fax numbers along with existing Division of... Archives and Records Administration (NARA). For information on the availability of this material at NARA...

75 FR 10973 - Hazardous Materials: Risk-Based Adjustment of Transportation Security Plan Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-09

... fertilizers) in solids. quantities >3,000 L (793 gallons) in a single packaging. 5.2 Any quantity of Organic Any quantity of Organic None. peroxide, Type B, liquid peroxide, Type B, liquid or solid, temperature... ammonium nitrate fertilizers; (13) Division 6.1 Packing Group I toxic materials; (14) Division 6.2...

49 CFR 176.400 - Stowage of Division 1.5, Class 4 (flammable solids) and Class 5 (oxidizers and organic peroxides...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 2 2013-10-01 2013-10-01 false Stowage of Division 1.5, Class 4 (flammable solids... Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS CARRIAGE BY VESSEL Detailed Requirements for Class 4 (Flammable...

49 CFR 176.400 - Stowage of Division 1.5, Class 4 (flammable solids) and Class 5 (oxidizers and organic peroxides...

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 2 2012-10-01 2012-10-01 false Stowage of Division 1.5, Class 4 (flammable solids... Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS CARRIAGE BY VESSEL Detailed Requirements for Class 4 (Flammable...

49 CFR 176.400 - Stowage of Division 1.5, Class 4 (flammable solids) and Class 5 (oxidizers and organic peroxides...

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 2 2014-10-01 2014-10-01 false Stowage of Division 1.5, Class 4 (flammable solids... Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS CARRIAGE BY VESSEL Detailed Requirements for Class 4 (Flammable...

49 CFR 176.415 - Permit requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... nitrates, and certain ammonium nitrate fertilizers. 176.415 Section 176.415 Transportation Other... Solids), Class 5 (Oxidizers and Organic Peroxides), and Division 1.5 Materials § 176.415 Permit requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers. (a) Except as...

Publications - SR 46 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

, R.C., Wood, J.E., and Clough, A.H. Publication Date: 1991 Publisher: Alaska Division of Geological , R.C., Wood, J.E., and Clough, A.H., 1991, Alaska's mineral industry 1991: Alaska Division of ; Beryllium; Bismuth; Ceramics; Chromium; Coal; Cobalt; Construction Materials; Copper; Cultural Resources

28 CFR 16.92 - Exemption of Environment and Natural Resources Division Systems-limited access.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Environment and Natural Resources Division Case and Related Files System, JUSTICE/ENRD-003. (ii) [Reserved] (2... Resources Division Systems-limited access. 16.92 Section 16.92 Judicial Administration DEPARTMENT OF JUSTICE PRODUCTION OR DISCLOSURE OF MATERIAL OR INFORMATION Exemption of Records Systems Under the Privacy Act § 16...

28 CFR 16.92 - Exemption of Environment and Natural Resources Division Systems-limited access.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Environment and Natural Resources Division Case and Related Files System, JUSTICE/ENRD-003. (ii) [Reserved] (2... Resources Division Systems-limited access. 16.92 Section 16.92 Judicial Administration DEPARTMENT OF JUSTICE PRODUCTION OR DISCLOSURE OF MATERIAL OR INFORMATION Exemption of Records Systems Under the Privacy Act § 16...

28 CFR 16.92 - Exemption of Environment and Natural Resources Division Systems-limited access.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Environment and Natural Resources Division Case and Related Files System, JUSTICE/ENRD-003. (ii) [Reserved] (2... Resources Division Systems-limited access. 16.92 Section 16.92 Judicial Administration DEPARTMENT OF JUSTICE PRODUCTION OR DISCLOSURE OF MATERIAL OR INFORMATION Exemption of Records Systems Under the Privacy Act § 16...

49 CFR 175.630 - Special requirements for Division 6.1 (poisonous) material and Division 6.2 (infectious...

Code of Federal Regulations, 2014 CFR

2014-10-01

... (infectious substances) materials. (a) A package required to bear a POISON, POISON INHALATION HAZARD, or... person may operate an aircraft that has been used to transport any package required to bear a POISON or POISON INHALATION HAZARD label unless, upon removal of such package, the area in the aircraft in which it...

49 CFR 175.630 - Special requirements for Division 6.1 (poisonous) material and Division 6.2 (infectious...

Code of Federal Regulations, 2011 CFR

2011-10-01

... (infectious substances) materials. (a) A package required to bear a POISON, POISON INHALATION HAZARD, or... person may operate an aircraft that has been used to transport any package required to bear a POISON or POISON INHALATION HAZARD label unless, upon removal of such package, the area in the aircraft in which it...

49 CFR 175.630 - Special requirements for Division 6.1 (poisonous) material and Division 6.2 (infectious...

Code of Federal Regulations, 2012 CFR

2012-10-01

... (infectious substances) materials. (a) A package required to bear a POISON, POISON INHALATION HAZARD, or... person may operate an aircraft that has been used to transport any package required to bear a POISON or POISON INHALATION HAZARD label unless, upon removal of such package, the area in the aircraft in which it...

49 CFR 175.630 - Special requirements for Division 6.1 (poisonous) material and Division 6.2 (infectious...

Code of Federal Regulations, 2013 CFR

2013-10-01

... (infectious substances) materials. (a) A package required to bear a POISON, POISON INHALATION HAZARD, or... person may operate an aircraft that has been used to transport any package required to bear a POISON or POISON INHALATION HAZARD label unless, upon removal of such package, the area in the aircraft in which it...

49 CFR 173.133 - Assignment of packing group and hazard zones for Division 6.1 materials.

Code of Federal Regulations, 2012 CFR

2012-10-01

... atmospheric pressure. Note 2: A liquid in Division 6.1 meeting criteria for Packing Group I, Hazard Zones A or... 49 Transportation 2 2012-10-01 2012-10-01 false Assignment of packing group and hazard zones for... Group Assignments and Exceptions for Hazardous Materials Other Than Class 1 and Class 7 § 173.133...

49 CFR 174.106 - “Order-Notify” or “C.O.D.” shipments, Division 1.1 or 1.2 (explosive) materials.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false âOrder-Notifyâ or âC.O.D.â shipments, Division 1.1... MATERIALS REGULATIONS CARRIAGE BY RAIL Class I (Explosive) Materials § 174.106 “Order-Notify” or “C.O.D... to “order-notify” or “C.O.D.”, except on a through bill of lading to a place outside the United...

Programmatic Life Cycle Environmental Assessment for Smoke/Obscurants. Volume 5. Dye/Colored Smokes

DTIC Science & Technology

1983-07-01

mostly of test or training debtls, i.e., expanded rounds and/or packaging materials or munition duds. SOP’s and test 0 plans which are required for each...This procedure I; especially applicable to test sites, If a safety (handling) hazard exists with colored smoke munitions and for excess mix, the material ...Countermeasures and Test Division Roger L. Schultz, DRCPM-SMK-M, Material Development and Technology ".• ,.Division Sq 52 I.,.’. S%" 2. Chemical Research and

MicrofluIdic circuit designs for performing electrokinetic manipulations that reduce the number of voltage sources and fluid reservoirs

DOEpatents

Jacobson, Stephen C.; Ramsey, J. Michael

2000-01-01

A microfabricated device and method for proportioning and mixing electrokinetically manipulated biological or chemical materials is disclosed. The microfabricated device mixes a plurality of materials in volumetric proportions controlled by the electrical resistances of tributary reagent channels through which the materials are transported. The microchip includes two or more tributary reagent channels combining at one or more junctions to form one or more mixing channels. By varying the geometries of the channels (length, cross section, etc.), a plurality of reagent materials can be mixed at a junction such that the proportions of the reagent materials in the mixing channel depend on a ratio of the channel geometries and material properties. Such an approach facilitates voltage division on the microchip without relying on external wiring schemes and voltage division techniques external to the microchip. Microchannel designs that provide the necessary voltage division to accomplish electrokinetic valving operations using a single voltage source and a switch are also described. In addition, microchannel designs that accomplish fluidic operation utilizing a minimal number of fluidic reservoirs are disclosed.

The Application of a Residual Risk Evaluation Technique Used for Expendable Launch Vehicles

NASA Technical Reports Server (NTRS)

Latimer, John A.

2009-01-01

This presentation provides a Residual Risk Evaluation Technique (RRET) developed by Kennedy Space Center (KSC) Safety and Mission Assurance (S&MA) Launch Services Division. This technique is one of many procedures used by S&MA at KSC to evaluate residual risks for each Expendable Launch Vehicle (ELV) mission. RRET is a straight forward technique that incorporates the proven methodology of risk management, fault tree analysis, and reliability prediction. RRET derives a system reliability impact indicator from the system baseline reliability and the system residual risk reliability values. The system reliability impact indicator provides a quantitative measure of the reduction in the system baseline reliability due to the identified residual risks associated with the designated ELV mission. An example is discussed to provide insight into the application of RRET.

MANTECH project book

NASA Astrophysics Data System (ADS)

The effective integration of processes, systems, and procedures used in the production of aerospace systems using computer technology is managed by the Integration Technology Division (MTI). Under its auspices are the Information Management Branch, which is actively involved with information management, information sciences and integration, and the Implementation Branch, whose technology areas include computer integrated manufacturing, engineering design, operations research, and material handling and assembly. The Integration Technology Division combines design, manufacturing, and supportability functions within the same organization. The Processing and Fabrication Division manages programs to improve structural and nonstructural materials processing and fabrication. Within this division, the Metals Branch directs the manufacturing methods program for metals and metal matrix composites processing and fabrication. The Nonmetals Branch directs the manufacturing methods programs, which include all manufacturing processes for producing and utilizing propellants, plastics, resins, fibers, composites, fluid elastomers, ceramics, glasses, and coatings. The objective of the Industrial Base Analysis Division is to act as focal point for the USAF industrial base program for productivity, responsiveness, and preparedness planning.

Publications - PIR 2016-2 | Alaska Division of Geological & Geophysical

Science.gov Websites

; Core Drilling; Cretaceous; Geologic Materials Center; Gold; Hayes Glacier Belt; Holocene; Intrusion ; Molybdenum; Placer Gold; Porphyry; Tellurium Top of Page Department of Natural Resources, Division of

Non-aqueous cleaning solvent substitution

NASA Technical Reports Server (NTRS)

Meier, Gerald J.

1994-01-01

A variety of environmental, safety, and health concerns exist over use of chlorinated and fluorinated cleaning solvents. Sandia National Laboratories, Lawrence Livermore National Laboratories, and the Kansas City Division of AlliedSignal have combined efforts to focus on finding alternative cleaning solvents and processes which are effective, environmentally safe, and compliant with local, state, and federal regulations. An alternative solvent has been identified, qualified, and implemented into production of complex electronic assemblies, where aqueous and semi-aqueous cleaning processes are not allowed. Extensive compatibility studies were performed with components, piece-parts, and materials. Electrical testing and accelerated aging were used to screen for detrimental, long-term effects. A terpene, d-limonene, was selected as the solvent of choice, and it was found to be compatible with the components and materials tested. A brief history of the overall project will be presented, along with representative cleaning efficiency results, compatibility results, and residual solvent data. The electronics industry is constantly searching for proven methods and environmentally-safe materials to use in manufacturing processes. The information in this presentation will provide another option to consider on future projects for applications requiring high levels of quality, reliability, and cleanliness from non-aqueous cleaning processes.

3D Grain Reconstruction from Boxscan Data

DTIC Science & Technology

2010-01-01

H.F. Poulsen∗ and E. M. Lauridsen∗ ∗ Center for Fundamental Research: Metal Structures in Four Dimensions, Materials Research Division, Risø- DTU , DK...Center for Fundamental Research,Metal Structures in FOur Dimensions, Materials Research Division,Riso- DTU , DK-4000,Roskilde, Denmark, 8. PERFORMING...provision of beam time by the ESRF, Grenoble, France, is greatly acknowledged. Furthermore, the staff at Risø- DTU thanks R. Gardner for valuable

49 CFR 173.133 - Assignment of packing group and hazard zones for Division 6.1 materials.

Code of Federal Regulations, 2014 CFR

2014-10-01

... pressure. Note 2: A liquid in Division 6.1 meeting criteria for Packing Group I, Hazard Zones A or B stated... 49 Transportation 2 2014-10-01 2014-10-01 false Assignment of packing group and hazard zones for... Group Assignments and Exceptions for Hazardous Materials Other Than Class 1 and Class 7 § 173.133...

49 CFR 173.133 - Assignment of packing group and hazard zones for Division 6.1 materials.

Code of Federal Regulations, 2013 CFR

2013-10-01

... pressure. Note 2: A liquid in Division 6.1 meeting criteria for Packing Group I, Hazard Zones A or B stated... 49 Transportation 2 2013-10-01 2013-10-01 false Assignment of packing group and hazard zones for... Group Assignments and Exceptions for Hazardous Materials Other Than Class 1 and Class 7 § 173.133...

Publications - GMC 131 | Alaska Division of Geological & Geophysical

Science.gov Websites

and core from the Chevron USA Inc. Eagle Creek #1 well Authors: Unknown Publication Date: 1989 Inc. Eagle Creek #1 well: Alaska Division of Geological & Geophysical Surveys Geologic Materials

Metals and Ceramics Division progress report for period ending June 30, 1984

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brogden, I.

1984-09-01

This progress report covers the research and development activities of the Metals and Ceramics Division from January 1, 1983, through June 30, 1984. The format of the report follows the organizational structure of the division. Short summaries of technical work in progress in the various experimental groups are presented in six parts. Chapter 1 deals with the research and development activities of the Engineering Materials Section, Chapter 2 with the Processing Science and Technology Section, Chapter 3 with the Materials Science Section, Chapter 4 with Project Activities, Chapter 5 with Specialized Research Facilities and Equipment, and Chapter 6 with Miscellaneousmore » Activities.« less

Investigating effects of communications modulation technique on targeting performance

NASA Astrophysics Data System (ADS)

Blasch, Erik; Eusebio, Gerald; Huling, Edward

2006-05-01

One of the key challenges facing the global war on terrorism (GWOT) and urban operations is the increased need for rapid and diverse information from distributed sources. For users to get adequate information on target types and movements, they would need reliable data. In order to facilitate reliable computational intelligence, we seek to explore the communication modulation tradeoffs affecting information distribution and accumulation. In this analysis, we explore the modulation techniques of Orthogonal Frequency Division Multiplexing (OFDM), Direct Sequence Spread Spectrum (DSSS), and statistical time-division multiple access (TDMA) as a function of the bit error rate and jitter that affect targeting performance. In the analysis, we simulate a Link 16 with a simple bandpass frequency shift keying (PSK) technique using different Signal-to-Noise ratios. The communications transfer delay and accuracy tradeoffs are assessed as to the effects incurred in targeting performance.

Mechanical properties of materials with nanometer scale dimensions and microstructures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nix, William D.

2015-08-05

The three-year grant for which this final report is required extends from 2011 to 2015, including a one-year, no-cost extension. But this is just the latest in a long series of grants from the Division of Materials Sciences of DOE and its predecessor offices and agencies. These include contracts or grants from: the Metallurgy Branch of the U.S. Atomic Energy Commission (from the late 1960s to the mid-1970s), the Materials Science Program of the U.S. Energy Research and Development Administration (from the mid- to late- 1970s), and the Division of Materials Science of the Office of Basic Energy Sciences ofmore » the U.S. Department of Energy (from the early 1980s to the present time). Taken all together, these offices have provided nearly continuous support for our research for nearly 50 years. As we have said on many occasions, this research support has been the best we have ever had, by far. As we look back on the nearly five decades of support from the Division of Materials Sciences and the predecessor offices, we find that the continuity of support that we have enjoyed has allowed us to be most productive and terms of papers published, doctoral students graduated and influence on the field of materials science. This report will, of course, cover the three-year period of the present grant, in summary form, but will also make reference to the output that resulted from support of previous grants from the Division of Materials Sciences and its predecessor offices.« less

The Office of the Materials Division

NASA Technical Reports Server (NTRS)

Ramsey, amanda J.

2004-01-01

I was assigned to the Materials Division, which consists of the following branches; the Advanced Metallics Branch/5120-RMM, Ceramics Branch/5130-RMC, Polymers Branch/5150-RMP, and the Durability and Protective Coatings Branch/5160-RMD. Mrs. Pamela Spinosi is my assigned mentor. She was assisted by Ms.Raysa Rodriguez/5100-RM and Mrs.Denise Prestien/5100-RM, who are both employed by InDyne, Inc. My primary assignment this past summer was working directly with Ms. Rodriguez, assisting her with setting up the Integrated Financial Management Program (IFMP) 5130-RMC/Branch procedures and logs. These duties consisted of creating various spreadsheets for each individual branch member, which were updated daily. It was not hard to familiarize myself with these duties since this is my second summer working with Ms Rodriguez at NASA Glenn Research Center. RMC ordering laboratory, supplies and equipment for the Basic Materials Laboratory (Building 106) using the IF'MP/Purchase Card (P-card), a NASA-wide software program. I entered into the IFMP/Travel and Requisitions System, new Travel Authorizations for the 5130-RMC Civil Servant Branch Members. I also entered and completed Travel Vouchers for the 5130-RMC Ceramics Branch. I assisted in the Division Office creating new Emergency Contact list for the Materials Division. I worked with Dr. Hugh Gray, the Division Chief, and Dr. Ajay Misra, the 5130-RMC Branch Chief, on priority action items, with a close deadline, for a large NASA Proposal. Another project was working closely with Ms. Rodriguez in organizing and preparing for Dr. Ajay K. Misra's SESCDP (two year detail). This consisted of organizing files, file folders, personal information, and recording all data material onto CD's and printing all presentations for display in binders. I attended numerous Branch meetings, and observed many changes in the Branch Management organization.

Monolithic QCL design approaches for improved reliability and affordability

NASA Astrophysics Data System (ADS)

Law, K. K.

2013-12-01

Many advances have been made recently in mid-wave infrared and long-wave infrared quantum cascade lasers (QCLs) technologies, and there is an increasing demand for these laser sources for ever expanding Naval, DoD and homeland security applications. We will discuss in this paper a portfolio of various Naval Air Warfare Weapons Division's current and future small business innovative research programs and efforts on significantly improving QCLs' performance, affordability, and reliability.

A Novel Reliable WDM-PON System

NASA Astrophysics Data System (ADS)

Chen, Benyang; Gan, Chaoqin; Qi, Yongqian; Xia, Lei

2011-12-01

In this paper, a reliable Wavelength-Division-Multiplexing Passive Optical Network (WDM-PON) system is proposed. It can provide the protection against both the feeder fiber failure and the distribution fiber failure. When the fiber failure occurs, the corresponding switches in the OLT and in the ONU can switch to the protection link without affecting the users in normal status. That is to say, the protection for one ONU is independent of the other ONUs.

Publications - GMC 227 | Alaska Division of Geological & Geophysical

Science.gov Websites

core (5,127-6,481') from the Texaco Inc. Colville Delta #3 Authors: Unknown Publication Date: 1994 Texaco Inc. Colville Delta #3: Alaska Division of Geological & Geophysical Surveys Geologic Materials

Composite Overview and Composite Aerocover Overview

NASA Technical Reports Server (NTRS)

Caraccio, Anne; Tate, LaNetra; Dokos, Adam; Taylor, Brian; Brown, Chad

2014-01-01

Materials Science Division within the Engineering Directorate tasked by the Ares Launch Vehicle Division (LX-V) and the Fluids Testing and Technology Development Branch (NE-F6) to design, fabricate and test an aerodynamic composite shield for potential Heavy Lift Launch Vehicle infusion and a composite strut that will serve as a pathfinder in evaluating calorimeter data for the CRYOSTAT (cryogenic on orbit storage and transfer) Project. ATP project is to carry the design and development of the aerodynamic composite cover or "bracket" from cradle to grave including materials research, purchasing, design, fabrication, testing, analysis and presentation of the final product. Effort consisted of support from the Materials Testing & Corrosion Control Branch (NE-L2) for mechanical testing, the Prototype Development Branch (NE-L3) for CAD drawing, design/analysis, and fabrication, Materials & Processes Engineering Branch (NE-L4) for project management and materials selection; the Applied Physics Branch (NE-LS) for NDE/NDI support; and the Chemical Analysis Branch (NE-L6) for developmental systems evaluation. Funded by the Ares Launch Vehicle Division and the Fluids Testing and Technology Development Branch will provide ODC

76 FR 22922 - JLG Industries, Inc., Access Division, A Subsidiary of Oshkosh Corporation, Hagerstown, MD...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-25

... on March 23, 2011 (76 FR 16450). The workers are engaged in activities related to the supply of design engineering, global procurement supply chain, and safety and reliability for the production of...

Characterization of contaminant removal by an optical strip material

NASA Astrophysics Data System (ADS)

Hamilton, James P.; Frigo, S. P.; Caroll, Brenden J.; Assoufidyen, L.; Lewis, Matthew S.; Cook, Russell E.; de Carlo, F.

2001-03-01

Department of Chemistry and Engineering Physics, University of Wisconsin-Platteville, Platteville, WI 53818 Advanced Photon Source, X-Ray Facilities Division, Argonne National Laboratory, Advanced Photon Source, User Program Division, Argonne National Laboratory, *Electron Microscopy Center, Materials Science Division, Argonne National Laboratory, Argonne National Laboratory, 9700 S. Cass Ave., Argonne IL 60439-4856 USA A novel optical strip coating material, Opticlean, has been shown to safely remove fingerprints, particles and contamination from a variety of optical surfaces including coated glass, Si and first surface mirrors. Contaminant removal was monitored by Nomarski, Atomic Force and Scanning Electron Microscopy. Sub-micron features on diffraction gratings and silicon wafers were also cleaned without leaving light scattering particles on the surface. **This work was supported in part by the U.S. Department of Energy, Basic Energy Sciences-Materials Sciences, under contract no. W-31-109-ENG-38. The authors acknowledge the support and facilities provided by the Advanced Photon Source and the Electron Microscopy Center at Argonne National Laboratory.

Statistical modeling of software reliability

NASA Technical Reports Server (NTRS)

Miller, Douglas R.

1992-01-01

This working paper discusses the statistical simulation part of a controlled software development experiment being conducted under the direction of the System Validation Methods Branch, Information Systems Division, NASA Langley Research Center. The experiment uses guidance and control software (GCS) aboard a fictitious planetary landing spacecraft: real-time control software operating on a transient mission. Software execution is simulated to study the statistical aspects of reliability and other failure characteristics of the software during development, testing, and random usage. Quantification of software reliability is a major goal. Various reliability concepts are discussed. Experiments are described for performing simulations and collecting appropriate simulated software performance and failure data. This data is then used to make statistical inferences about the quality of the software development and verification processes as well as inferences about the reliability of software versions and reliability growth under random testing and debugging.

Publications - GMC 400 | Alaska Division of Geological & Geophysical

Science.gov Websites

, Kashwitna Lake #1, Little Su #1, Sheep Creek #1, and Slats #1 coal-bed methane wells Authors: Posey, C.M methane wells: Alaska Division of Geological & Geophysical Surveys Geologic Materials Center Data

Design and implementation of a Windows NT network to support CNC activities

NASA Technical Reports Server (NTRS)

Shearrow, C. A.

1996-01-01

The Manufacturing, Materials, & Processes Technology Division is undergoing dramatic changes to bring it's manufacturing practices current with today's technological revolution. The Division is developing Computer Automated Design and Computer Automated Manufacturing (CAD/CAM) abilities. The development of resource tracking is underway in the form of an accounting software package called Infisy. These two efforts will bring the division into the 1980's in relationship to manufacturing processes. Computer Integrated Manufacturing (CIM) is the final phase of change to be implemented. This document is a qualitative study and application of a CIM application capable of finishing the changes necessary to bring the manufacturing practices into the 1990's. The documentation provided in this qualitative research effort includes discovery of the current status of manufacturing in the Manufacturing, Materials, & Processes Technology Division including the software, hardware, network and mode of operation. The proposed direction of research included a network design, computers to be used, software to be used, machine to computer connections, estimate a timeline for implementation, and a cost estimate. Recommendation for the division's improvement include action to be taken, software to utilize, and computer configurations.

75 FR 21963 - Regulatory Flexibility Agenda

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-26

... Materials 3235-AK25 DIVISION OF INVESTMENT MANAGEMENT--Proposed Rule Stage Regulation Sequence Title... 3235-AI17 DIVISION OF INVESTMENT MANAGEMENT--Completed Actions Regulation Sequence Title Identifier... Management Investment Company 3235-AJ11 Shares, Unit Investment Trust Interests, and Municipal Fund...

Berkeley Lab - Materials Sciences Division

Science.gov Websites

MSD Support Human Resources Facilities & Space Planning Procurement and Property Proposals & ; Finance Templates Travel One-Stop Acknowledging MSD Support Human Resources Facilities & Space Operations For information regarding Human Resources, procedures for acknowledging MSD support, division

How-to-Do-It: Hands-on Activities that Relate Mendelian Genetics to Cell Division.

ERIC Educational Resources Information Center

McKean, Heather R.; Gibson, Linda S.

1989-01-01

Presented is an activity designed to connect Mendelian laws with the physical processes of cell division. Included are materials production, procedures and worksheets for the meiosis-mitosis game and a genetics game. (CW)

On the interrelation of multiplication and division in secondary school children.

PubMed

Huber, Stefan; Fischer, Ursula; Moeller, Korbinian; Nuerk, Hans-Christoph

2013-01-01

Each division problem can be transformed into as a multiplication problem and vice versa. Recent research has indicated strong developmental parallels between multiplication and division in primary school children. In this study, we were interested in (i) whether these developmental parallels persist into secondary school, (ii) whether similar developmental parallels can be observed for simple and complex problems, (iii) whether skill level modulates this relationship, and (iv) whether the correlations are specific and not driven by general cognitive or arithmetic abilities. Therefore, we assessed performance of 5th and 6th graders attending two secondary school types of the German educational system in simple and complex multiplication as well as division while controlling for non-verbal intelligence, short-term memory, and other arithmetic abilities. Accordingly, we collected data from students differing in skills levels due to either age (5th < 6th grade) or school type (general < intermediate secondary school). We observed moderate to strong bivariate and partial correlations between multiplication and division with correlations being higher for simple tasks but nevertheless reliable for complex tasks. Moreover, the association between simple multiplication and division depended on students' skill levels as reflected by school types, but not by age. Partial correlations were higher for intermediate than for general secondary school children. In sum, these findings emphasize the importance of the inverse relationship between multiplication and division which persists into later developmental stages. However, evidence for skill-related differences in the relationship between multiplication and division was restricted to the differences for school types.

On the interrelation of multiplication and division in secondary school children

PubMed Central

Huber, Stefan; Fischer, Ursula; Moeller, Korbinian; Nuerk, Hans-Christoph

2013-01-01

Multiplication and division are conceptually inversely related: Each division problem can be transformed into as a multiplication problem and vice versa. Recent research has indicated strong developmental parallels between multiplication and division in primary school children. In this study, we were interested in (i) whether these developmental parallels persist into secondary school, (ii) whether similar developmental parallels can be observed for simple and complex problems, (iii) whether skill level modulates this relationship, and (iv) whether the correlations are specific and not driven by general cognitive or arithmetic abilities. Therefore, we assessed performance of 5th and 6th graders attending two secondary school types of the German educational system in simple and complex multiplication as well as division while controlling for non-verbal intelligence, short-term memory, and other arithmetic abilities. Accordingly, we collected data from students differing in skills levels due to either age (5th < 6th grade) or school type (general < intermediate secondary school). We observed moderate to strong bivariate and partial correlations between multiplication and division with correlations being higher for simple tasks but nevertheless reliable for complex tasks. Moreover, the association between simple multiplication and division depended on students' skill levels as reflected by school types, but not by age. Partial correlations were higher for intermediate than for general secondary school children. In sum, these findings emphasize the importance of the inverse relationship between multiplication and division which persists into later developmental stages. However, evidence for skill-related differences in the relationship between multiplication and division was restricted to the differences for school types. PMID:24133476

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Synthesis Condensed Matter and Materials Physics Scattering and Instrumentation Science Centers Center for ; Finance Templates Travel One-Stop Core Programs Materials Discovery, Design and Synthesis Condensed Matter

The Yeast Cyclin-Dependent Kinase Routes Carbon Fluxes to Fuel Cell Cycle Progression.

PubMed

Ewald, Jennifer C; Kuehne, Andreas; Zamboni, Nicola; Skotheim, Jan M

2016-05-19

Cell division entails a sequence of processes whose specific demands for biosynthetic precursors and energy place dynamic requirements on metabolism. However, little is known about how metabolic fluxes are coordinated with the cell division cycle. Here, we examine budding yeast to show that more than half of all measured metabolites change significantly through the cell division cycle. Cell cycle-dependent changes in central carbon metabolism are controlled by the cyclin-dependent kinase (Cdk1), a major cell cycle regulator, and the metabolic regulator protein kinase A. At the G1/S transition, Cdk1 phosphorylates and activates the enzyme Nth1, which funnels the storage carbohydrate trehalose into central carbon metabolism. Trehalose utilization fuels anabolic processes required to reliably complete cell division. Thus, the cell cycle entrains carbon metabolism to fuel biosynthesis. Because the oscillation of Cdk activity is a conserved feature of the eukaryotic cell cycle, we anticipate its frequent use in dynamically regulating metabolism for efficient proliferation. Copyright © 2016 Elsevier Inc. All rights reserved.

Analytical Chemistry Division annual progress report for period ending December 31, 1985

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shultz, W.D.

1986-05-01

Progress reports are presented for the four major sections of the division: analytical spectroscopy, radioactive materials laboratories, inorganic chemistry, and organic chemistry. A brief discussion of the division's role in the Laboratory's Environmental Restoration and Facilities Upgrade is given. Information about quality assurance and safety programs is presented, along with a tabulation of analyses rendered. Publications, oral presentations, professional activities, educational programs, and seminars are cited.

Solid State Division progress report for period ending September 30, 1984

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, P.H.; Watson, D.M.

1985-03-01

During the reporting period, relatively minor changes have occurred in the research areas of interest to the Division. Nearly all the research of the Division can be classified broadly as mission-oriented basic research. Topics covered include: theoretical solid state physics; surface and near-surface properties of solids; defects in solids; transport properties of solids; neutron scattering; and preparation and characterization of research materials. (GHT)

Chemistry Division annual progress report for period ending April 30, 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Poutsma, M.L.; Ferris, L.M.; Mesmer, R.E.

1993-08-01

The Chemistry Division conducts basic and applied chemical research on projects important to DOE`s missions in sciences, energy technologies, advanced materials, and waste management/environmental restoration; it also conducts complementary research for other sponsors. The research are arranged according to: coal chemistry, aqueous chemistry at high temperatures and pressures, geochemistry, chemistry of advanced inorganic materials, structure and dynamics of advanced polymeric materials, chemistry of transuranium elements and compounds, chemical and structural principles in solvent extraction, surface science related to heterogeneous catalysis, photolytic transformations of hazardous organics, DNA sequencing and mapping, and special topics.

78 FR 12042 - Electric Grid Integration Technical Workshops

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-21

.... The documents are the Electricity Distribution System Workshop Discussion Summary and the Electricity... FURTHER INFORMATION CONTACT: Caitlin A. Callaghan, National Electricity Delivery Division, Office of Electricity Delivery and Energy Reliability, U.S. Department of Energy, Forrestal Building, Room 8E-032, 1000...

18 CFR 376.204 - Delegation of Commission's authority during emergency conditions.

Code of Federal Regulations, 2011 CFR

2011-04-01

...; (viii) Deputy Directors, Office of Energy Projects, in order of seniority; (ix) Deputy Directors, Office... Energy Projects; Assistant Directors and Division heads, Office of Electric Reliability; Deputy Associate... Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REVISED GENERAL RULES ORGANIZATION...

18 CFR 376.204 - Delegation of Commission's authority during emergency conditions.

Code of Federal Regulations, 2012 CFR

2012-04-01

...; (viii) Deputy Directors, Office of Energy Projects, in order of seniority; (ix) Deputy Directors, Office... Energy Projects; Assistant Directors and Division heads, Office of Electric Reliability; Deputy Associate... Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REVISED GENERAL RULES ORGANIZATION...

18 CFR 376.204 - Delegation of Commission's authority during emergency conditions.

Code of Federal Regulations, 2013 CFR

2013-04-01

...; (viii) Deputy Directors, Office of Energy Projects, in order of seniority; (ix) Deputy Directors, Office... Energy Projects; Assistant Directors and Division heads, Office of Electric Reliability; Deputy Associate... Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REVISED GENERAL RULES ORGANIZATION...

49 CFR 385.402 - What definitions are used in this subpart?

Code of Federal Regulations, 2010 CFR

2010-10-01

... temperature materials, materials designated as hazardous in the Hazardous Materials Table (see § 172.101 of this title), and materials that meet the defining criteria for hazard classes and divisions in part 173...

2016.11.22 Updated Materials Physics and Applications Division Overview Presentation for TV monitor in 3-1415-Lobby

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duran, Susan M.

These slides are the updated overview presentation for the TV monitor in 3-1415-Lobby at Los Alamos National Laboratory (LANL). It gives an overview of the Materials Physics and Applications Division, including descriptions of the leaders, where researchers are fellows (such as APS or OSA), the newest LANL fellows at MPA, and many other researchers who have won prizes. Finally, MPA's research accomplishments and focuses are detailed.

Carbon Smackdown: Smart Windows (LBNL Summer Lecture Series)

ScienceCinema

Milliron, Delia; Selkowitz, Stephen

2017-12-09

August 3, 2010 Berkeley Lab talk: In the fourth of five Carbon Smackdown matches, Berkeley Lab researchers Delia Milliron of the Materials Sciences Division and Stephen Selkowitz of the Environmental Energy Technologies Division talk about their work on energy-saving smart windows.

77 FR 61432 - Proposal Review for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-09

... NATIONAL SCIENCE FOUNDATION Proposal Review for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and... Director, Materials Research Science and Engineering Centers Program, Division of Materials Research, Room...

Reliable Wide-Area Wavelength Division Multiplexing Passive Optical Network Accommodating Gigabit Ethernet and 10-Gb Ethernet Services

NASA Astrophysics Data System (ADS)

Nakamura, Hirotaka; Suzuki, Hiro; Kani, Jun-Ichi; Iwatsuki, Katsumi

2006-05-01

This paper proposes and demonstrates a reliable wide-area wavelength-division-multiplexing passive optical network (WDM-PON) with a wavelength-shifted protection scheme. This protection scheme utilizes the cyclic property of 2 × N athermal arrayed-waveguide grating and two kinds of wavelength allocations, each of which is assigned for working and protection, respectively. Compared with conventional protection schemes, this scheme does not need a 3-dB optical coupler, thus leading to ensure the large loss budget that is suited for wide-area WDM-PONs. It also features a passive access node and does not have a protection function in the optical network unit (ONU). The feasibility of the proposed scheme is experimentally confirmed by the carrier-distributed WDM-PON with gigabit Ethernet interface (GbE-IF) and 10-GbE-IF, in which the ONU does not employ a light source, and all wavelengths for upstream signals are centralized and distributed from the central office.

Operational numerical weather prediction on the CYBER 205 at the National Meteorological Center

NASA Technical Reports Server (NTRS)

Deaven, D.

1984-01-01

The Development Division of the National Meteorological Center (NMC), having the responsibility of maintaining and developing the numerical weather forecasting systems of the center, is discussed. Because of the mission of NMC data products must be produced reliably and on time twice daily free of surprises for forecasters. Personnel of Development Division are in a rather unique situation. They must develop new advanced techniques for numerical analysis and prediction utilizing current state-of-the-art techniques, and implement them in an operational fashion without damaging the operations of the center. With the computational speeds and resources now available from the CYBER 205, Development Division Personnel will be able to introduce advanced analysis and prediction techniques into the operational job suite without disrupting the daily schedule. The capabilities of the CYBER 205 are discussed.

2002 Microgravity Materials Science Conference

NASA Technical Reports Server (NTRS)

Gillies, Donald (Editor); Ramachandran, Narayanan (Editor); Murphy, Karen (Editor); McCauley, Dannah (Editor); Bennett, Nancy (Editor)

2003-01-01

The 2002 Microgravity Materials Science Conference was held June 25-26, 2002, at the Von Braun Center, Huntsville, Alabama. Organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Physical Sciences Research Division, NASA Headquarters, and hosted by NASA Marshall Space Flight Center and member institutions under the Cooperative Research in Biology and Materials Science (CORBAMS) agreement, the conference provided a forum to review the current research and activities in materials science, discuss the envisioned long-term goals, highlight new crosscutting research areas of particular interest to the Physical Sciences Research Division, and inform the materials science community of research opportunities in reduced gravity. An abstracts book was published and distributed at the conference to the approximately 240 people attending, who represented industry, academia, and other NASA Centers. This CD-ROM proceedings is comprised of the research reports submitted by the Principal Investigators in the Microgravity Materials Science program.

77 FR 61433 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-09

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and..., Program Director, Materials Research Science and Engineering Centers Program, Division of Materials...

77 FR 56236 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-12

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and... Director, Materials Research Science and Engineering Centers Program, Division of Materials Research, Room...

77 FR 6826 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-09

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and..., Program Director, Materials Research Science and Engineering Centers Program, Division of Materials...

77 FR 57162 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-17

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and... Director, Materials Research Science and Engineering Centers Program, Division of Materials Research, Room...

77 FR 14441 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-09

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and..., Materials Research Science and Engineering Centers Program, Division of Materials Research, Room 1065...

Alessandra Lanzara

Science.gov Websites

Berkeley Lab Berkeley Lab A-Z Index Phone Book Jobs Search DOE Search MSD Go MSD - Materials Investigators Division Staff Facilities and Centers Staff Jobs Safety Personnel Resources Committees In Case of ; Finance Templates Travel One-Stop Investigators Division Staff Facilities and Centers Staff Jobs

Los Alamos National Laboratory Prototype Fabrication Division CNM Briefing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hidalgo, Stephen P.; Keyser, Richard J.

2012-06-18

Prototype Fabrication Division designs, programs, manufactures, and inspects on-site high quality, diverse material parts and components that can be delivered at the pace the customer needs to meet their mission. Our goal is to bring vision to reality in the name of science.

21 CFR 10.30 - Citizen petition.

Code of Federal Regulations, 2011 CFR

2011-04-01

... and in the following form: (Date) Division of Dockets Management, Food and Drug Administration... of wage earners, businesses, or government; (3) competition; (4) supplies of important materials... section and § 10.20 will be filed by the Division of Dockets Management, stamped with the date of filing...

Learning Curve of a Young Surgeon's Video-assisted Thoracic Surgery Lobectomy during His First Year Experience in Newly Established Institution

PubMed Central

Ahn, Hyo Yeong; Kim, Min Su

2012-01-01

Background The purpose of this paper is to present a guideline for beginning video-assisted thoracic surgery (VATS) lobectomy to junior surgeons, and to review the first year experience of a new surgeon performing VATS lobectomies who had not performed a VATS lobectomy unassisted during his training period. Materials and Methods A young surgeon opened a division of general thoracic surgery at a medical institution. The surgeon had performed about 100 lobectomies via conventional thoracotomy during his training period, but had never performed a VATS lobectomy unassisted while under the supervision of an expert. After opening the division of general thoracic surgery, the surgeon performed a total of 38 pulmonary lobectomies for various pulmonary diseases from March 2009 to February 2010. All data were collected retrospectively. Results There were 14 lobectomies via thoracotomy, 14 VATS lobectomies, and 10 cases of attempted VATS lobectomies that were converted to open thoracotomies. The number of VATS lobectomies increased from the second quarter (n=0) to the third quarter (n=5). The lobectomies that were converted from VATS into thoracotomies decreased from the second quarter (n=5) to the third quarter (n=1) (p=0.002). Conclusion It can take 6 months for young surgeons without experience in VATS lobectomy in their training period to be able to reliably perform a VATS lobectomy. PMID:22708084

49 CFR 107.315 - Admission of violations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS AND OIL TRANSPORTATION HAZARDOUS MATERIALS... transfer may be obtained from the Financial Operations Division (AMZ-120), Federal Aviation Administration...

49 CFR 107.315 - Admission of violations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS AND OIL TRANSPORTATION HAZARDOUS MATERIALS... transfer may be obtained from the Financial Operations Division (AMZ-120), Federal Aviation Administration...

78 FR 11903 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-20

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site Visit review of the Materials Research Science and... Structures Materials Research Science and Engineering Center, by NSF Division of Materials Research (DMR...

49 CFR 105.5 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... hazardous substances, hazardous wastes, marine pollutants, elevated temperature materials, materials... defining criteria for hazard classes and divisions in part 173 of subchapter C of this chapter. Hazardous...

CUNY Tech Continuing Education Annual Report, 1983-1984.

ERIC Educational Resources Information Center

New York City Technical Coll., Brooklyn. Div. of Continuing Education and Extension Services.

Information on funding, enrollments, and outcomes is provided for the programs offered during 1983-84 by New York City Technical College's Division of Continuing Education and Extension Services. Introductory material analyzes enrollments in the division, discusses the effects of funding changes, and summarizes major accomplishments in selected…

Materials and Molecular Research Division annual report 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Searcy, A.W.; Muller, R.H.; Peterson, C.V.

1984-07-01

Progress is reported in the following fields: materials sciences (metallurgy and ceramics, solid-state physics, materials chemistry), chemical sciences (fundamental interactions, processes and techniques), actinide chemistry, fossil energy, electrochemical energy storage systems, superconducting magnets, semiconductor materials and devices, and work for others. (DLC)

75 FR 18241 - Proposal Review Panel for Materials Research Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-09

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research Notice of Meeting In... Rieker, Program Director, Materials Research Science and Engineering Centers Program, Division of Materials Research, Room 1065, National Science Foundation, 4201 Wilson Boulevard, Arlington, VA 22230...

77 FR 31400 - Nixon Presidential Historical Materials: Opening of Materials

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-25

... NATIONAL ARCHIVES AND RECORDS ADMINISTRATION Nixon Presidential Historical Materials: Opening of Materials AGENCY: National Archives and Records Administration. ACTION: Notice of Opening of Additional... by the Richard Nixon Presidential Library and Museum, a division of the National Archives and Records...

77 FR 58179 - Nixon Presidential Historical Materials: Opening of Materials

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-19

... NATIONAL ARCHIVES AND RECORDS ADMINISTRATION Nixon Presidential Historical Materials: Opening of Materials AGENCY: National Archives and Records Administration ACTION: Notice of opening of additional... by the Richard Nixon Presidential Library and Museum, a division of the National Archives and Records...

76 FR 27092 - Nixon Presidential Historical Materials: Opening of Materials

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-10

... NATIONAL ARCHIVES AND RECORDS ADMINISTRATION Nixon Presidential Historical Materials: Opening of Materials AGENCY: National Archives and Records Administration. ACTION: Notice of opening of additional... by the Richard Nixon Presidential Library and Museum, a division of the National Archives and Records...

75 FR 68384 - Nixon Presidential Historical Materials: Opening of Materials

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-05

... NATIONAL ARCHIVES AND RECORDS ADMINISTRATION Nixon Presidential Historical Materials: Opening of Materials AGENCY: National Archives and Records Administration. ACTION: Notice of Opening of Additional... by the Richard Nixon Presidential Library and Museum, a division of the National Archives and Records...

77 FR 20852 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-06

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In.... Thomas Rieker, Program Director, Materials Research Science and Engineering Centers Program, Division of Materials Research, Room 1065, National Science Foundation, 4201 Wilson Boulevard, Arlington, VA 22230...

75 FR 41093 - FM Table of Allotments, Maupin, Oregon

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-15

.... SUMMARY: The Audio Division grants the Petition for Reconsideration filed on behalf of Maupin Broadcasting... materials in accessible formats for people with disabilities (Braille, large print, electronic files, audio.... John A. Karousos, Assistant Chief, Audio Division, Media Bureau. [FR Doc. 2010-17226 Filed 7-14-10; 8...

Staff - Kenneth R. Papp | Alaska Division of Geological & Geophysical

Science.gov Websites

Alaska MAPTEACH Tsunami Inundation Mapping Energy Resources Gas Hydrates STATEMAP Program information Alaska Energy Authority, and the Curator of the Geologic Materials Center (2009-2015). Position: Division survey-wide interface for geologists to publish digital map data (DGGS) Established the Alaska Energy

49 CFR 173.222 - Dangerous goods in equipment, machinery or apparatus.

Code of Federal Regulations, 2014 CFR

2014-10-01

... substantially impair the protective properties of the cushioning material. (3) Receptacles for gases, their... Division 2.2 gases. For transportation by aircraft, Division 2.2 gases with subsidiary risks and... paragraphs (c)(1) through (c)(3) of this section. (d) Except for transportation by aircraft, when a package...

49 CFR 173.222 - Dangerous goods in equipment, machinery or apparatus.

Code of Federal Regulations, 2013 CFR

2013-10-01

... substantially impair the protective properties of the cushioning material. (3) Receptacles for gases, their... Division 2.2 gases. For transportation by aircraft, Division 2.2 gases with subsidiary risks and... paragraphs (c)(1) through (c)(3) of this section. (d) Except for transportation by aircraft, when a package...

49 CFR 173.222 - Dangerous goods in equipment, machinery or apparatus.

Code of Federal Regulations, 2012 CFR

2012-10-01

... substantially impair the protective properties of the cushioning material. (3) Receptacles for gases, their... Division 2.2 gases. For transportation by aircraft, Division 2.2 gases with subsidiary risks and... paragraphs (c)(1) through (c)(3) of this section. (d) Except for transportation by aircraft, when a package...

Publications - GMC 17 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

and Facilities Staff Seismic and Well Data Data Reports Contact Us Frequently Asked Questions Ask a vitrinite reflectance) from Exxon Pt. Thompson #3 well Authors: AMOCO Publication Date: 1983 Publisher #3 well: Alaska Division of Geological & Geophysical Surveys Geologic Materials Center Data

Publications - GMC 106 | Alaska Division of Geological & Geophysical

Science.gov Websites

and Facilities Staff Seismic and Well Data Data Reports Contact Us Frequently Asked Questions Ask a microfossils from cuttings of Hemi Springs State #1 well Authors: Unknown Publication Date: 1989 Publisher Springs State #1 well: Alaska Division of Geological & Geophysical Surveys Geologic Materials Center

Publications - GMC 104 | Alaska Division of Geological & Geophysical

Science.gov Websites

and Facilities Staff Seismic and Well Data Data Reports Contact Us Frequently Asked Questions Ask a microfossils from cuttings of Kavearak Point 32-25 well Authors: Unknown Publication Date: 1988 Publisher Point 32-25 well: Alaska Division of Geological & Geophysical Surveys Geologic Materials Center Data

Publications - GMC 261 | Alaska Division of Geological & Geophysical

Science.gov Websites

and Facilities Staff Seismic and Well Data Data Reports Contact Us Frequently Asked Questions Ask a ') of the ARCO Alaska Inc. Jones Island #1 well Authors: Unknown Publication Date: 1996 Publisher well: Alaska Division of Geological & Geophysical Surveys Geologic Materials Center Data Report 261

Publications - GMC 105 | Alaska Division of Geological & Geophysical

Science.gov Websites

and Facilities Staff Seismic and Well Data Data Reports Contact Us Frequently Asked Questions Ask a microfossils from cuttings of Gwydyr Bay State #2 well Authors: Unknown Publication Date: 1989 Publisher Bay State #2 well: Alaska Division of Geological & Geophysical Surveys Geologic Materials Center

76 FR 67765 - Notice of Availability of Uranium Enrichment Fuel Cycle Facility's Inspection Reports Regarding...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-02

... Uranium Enrichment Fuel Cycle Facility's Inspection Reports Regarding Louisiana Energy Services, National..., Uranium Enrichment Branch, Division of Fuel Cycle Safety and Safeguards, Office of Nuclear Material Safety... Commission. Brian W. Smith, Chief, Uranium Enrichment Branch, Division of Fuel Cycle Safety and Safeguards...

Publications - DDS 6 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

Publications Geologic Materials Center General Information Inventory Monthly Report Hours and Location Policy DGGS DDS 6 Publication Details Title: Historically active volcanoes of Alaska Authors: Cameron, C.E , C.E., and Schaefer, J.R., 2016, Historically active volcanoes of Alaska: Alaska Division of Geological

Water-Based Coating Simplifies Circuit Board Manufacturing

NASA Technical Reports Server (NTRS)

2008-01-01

The Structures and Materials Division at Glenn Research Center is devoted to developing advanced, high-temperature materials and processes for future aerospace propulsion and power generation systems. The Polymers Branch falls under this division, and it is involved in the development of high-performance materials, including polymers for high-temperature polymer matrix composites; nanocomposites for both high- and low-temperature applications; durable aerogels; purification and functionalization of carbon nanotubes and their use in composites; computational modeling of materials and biological systems and processes; and developing polymer-derived molecular sensors. Essentially, this branch creates high-performance materials to reduce the weight and boost performance of components for space missions and aircraft engine components. Under the leadership of chemical engineer, Dr. Michael Meador, the Polymers Branch boasts world-class laboratories, composite manufacturing facilities, testing stations, and some of the best scientists in the field.

75 FR 9001 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-26

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and... Science and Engineering Centers Program, Division of Materials Research, Room 1065, National Science...

78 FR 11903 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-20

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site Visit review of the Materials Research Science and... Research Science and Engineering Centers Program, Division of Materials Research, Room 1065, National...

75 FR 4876 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-29

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and... Science and Engineering Centers Program, Division of Materials Research, Room 1065, National Science...

77 FR 57161 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-17

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and... Research Science and Engineering Centers Program, Division of Materials Research, Room 1065, National...

78 FR 5505 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-25

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site Visit review of the Materials Research Science and.... Charles Bouldin, Program Director, Materials Research Science and Engineering Centers Program, Division of...

78 FR 14836 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Members of SGIP 2...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-07

...; Electric Reliability Council of Texas (ERCOT), Austin, TX; Helikon.net , Washington, DC; Honeywell... Systems Engineering Research Center (PSERC), Tempe, AZ; Samsung Telecommunications America, Richardson, TX... DEPARTMENT OF JUSTICE Antitrust Division Notice Pursuant to the National Cooperative Research and...

The Effects of Soviet Army Communications Jamming on the AIM Division Signal Battalion.

DTIC Science & Technology

1980-06-06

Mass ". Antenna Antenn Figure 2-16 This explains why tactical line-of-site communication systems have installation difficulties when deployed in rugged...vertically polarized loop and adcock type antennas. While these antennas are especially reliable when identifing the azimuth of vertically polarized signal

Focusing light through random scattering media by four-element division algorithm

NASA Astrophysics Data System (ADS)

Fang, Longjie; Zhang, Xicheng; Zuo, Haoyi; Pang, Lin

2018-01-01

The focusing of light through random scattering materials using wavefront shaping is studied in detail. We propose a newfangled approach namely four-element division algorithm to improve the average convergence rate and signal-to-noise ratio of focusing. Using 4096 independently controlled segments of light, the intensity at the target is 72 times enhanced over the original intensity at the same position. The four-element division algorithm and existing phase control algorithms of focusing through scattering media are compared by both of the numerical simulation and the experiment. It is found that four-element division algorithm is particularly advantageous to improve the average convergence rate of focusing.

Energy efficient flexible hybrid wavelength division multiplexing-time division multiplexing passive optical network with pay as you grow deployment

NASA Astrophysics Data System (ADS)

Garg, Amit Kumar; Madavi, Amresh Ashok; Janyani, Vijay

2017-02-01

A flexible hybrid wavelength division multiplexing-time division multiplexing passive optical network architecture that allows dual rate signals to be sent at 1 and 10 Gbps to each optical networking unit depending upon the traffic load is proposed. The proposed design allows dynamic wavelength allocation with pay-as-you-grow deployment capability. This architecture is capable of providing up to 40 Gbps of equal data rates to all optical distribution networks (ODNs) and up to 70 Gbps of a asymmetrical data rate to the specific ODN. The proposed design handles broadcasting capability with simultaneous point-to-point transmission, which further reduces energy consumption. In this architecture, each module sends a wavelength to each ODN, thus making the architecture fully flexible; this flexibility allows network providers to use only required OLT components and switch off others. The design is also reliable to any module or TRx failure and provides services without any service disruption. Dynamic wavelength allocation and pay-as-you-grow deployment support network extensibility and bandwidth scalability to handle future generation access networks.

Moving with the flow: what transport laws reveal about cell division and expansion.

PubMed

Silk, Wendy Kuhn

2006-01-01

This material was presented as a keynote talk for the symposium, "Crosstalk between cell division and expansion," organized by G.T.S. Beemster and H. Tsukaya at the International Botanical Congress, Vienna in July, 2005. The review focuses on the utility of continuity equations to understand relationships among cell size, division and expansion; insights from Lagrangian or cell-specific descriptions of developmental variables; and a growth-diffusion equation to show effects of root growth zones on the surrounding soil.

Patterns of cell division, DNA base compositions, and fine structures of some radiation-resistant vegetative bacteria found in food

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sanders, S.W.; Maxcy, R.B.

1979-01-01

Representative highly radiation-resistant Moraxella-Acinetobacter (M-A), Pseudomonas radiora, Micrococcus radiodurans, and Micrococcus radiophilus exhibited a wide variety of division systems and cell wall characteristics. However, the more resistant M-A possessed unusually thick cell walls, indicating a possible role of the cell wall in radiation resistance in the M-A. Thick septation was present in most of the bacteria studied, but was absent in P. radiora, thus excluding this as a necessity for high resistance. Reliable determination of the number of division planes of the M-A for use as a taxonomic criterion was achieved by the direct observation of dividing cells. The highlymore » resistant M-A were found to divide in multiple planes and had base compositions of 54.0 to 57.5%, unlike typical Moraxella and/or Acinetobacter species. The taxonomic position of most highly resistant bacteria remains unclear.« less

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Synthesis Condensed Matter and Materials Physics Scattering and Instrumentation Science Centers Center for ; Finance Templates Travel One-Stop Latest News Postdoc Forum Research Highlights Awards Publications

Federal Real Property: Corps of Engineers Needs to Improve the Reliability of Its Real Property Disposal Data

DTIC Science & Technology

2008-05-01

Management Information System (REMIS) for recording its civil works inventory. GAO was asked to determine whether REMIS could provide reliable information on the Corps’ civil works land disposals from fiscal years 1996 through 2006. GAO s work involved comparison analyses of REMIS disposal data and other Corps reported disposal data, reviews of Corps’ real property policies and guidance, and interviews with Corps officials at headquarters, three divisions, four districts, and the Real Estate Systems National Center (RESNC), which manages

Water for the Nation: An overview of the USGS Water Resources Division

USGS Publications Warehouse

,

1998-01-01

The Water Resources Division (WRD) of the U.S. Geological Survey (USGS) provides reliable, impartial, timely information needed to understand the Nation's water resources. WRD actively promotes the use of this information by decisionmakers to: * Minimize the loss of life and property as a result of water-related hazards such as floods, droughts, and land movement. * Effectively manage ground-water and surface-water resources for domestic, agricultural, commercial, industrial, recreational, and ecological uses. * Protect and enhance water resources for human health, aquatic health, and environmental quality. * Contribute to wise physical and economic development of the Nation's resources for the benefit of present and future generations.

Transforming a fourth year modern optics course using a deliberate practice framework

NASA Astrophysics Data System (ADS)

Jones, David J.; Madison, Kirk W.; Wieman, Carl E.

2015-12-01

[This paper is part of the Focused Collection on Upper Division Physics Courses.] We present a study of active learning pedagogies in an upper-division physics course. This work was guided by the principle of deliberate practice for the development of expertise, and this principle was used in the design of the materials and the orchestration of the classroom activities of the students. We present our process for efficiently converting a traditional lecture course based on instructor notes into activities for such a course with active learning methods. Ninety percent of the same material was covered and scores on common exam problems showed a 15% improvement with an effect size greater than 1 after the transformation. We observe that the improvement and the associated effect size is sustained after handing off the materials to a second instructor. Because the improvement on exam questions was independent of specific problem topics and because the material tested was so mathematically advanced and broad (including linear algebra, Fourier transforms, partial differential equations, and vector calculus), we expect the transformation process could be applied to most upper-division physics courses having a similar mathematical base.

Preformed, patterned striping material : "Stamark Pliant Polymer Marking Tape" : "Series 5730" , "Series A350" : final report.

DOT National Transportation Integrated Search

1991-11-01

In 1989, two pavement striping tape materials were placed on two new asphalt pavements. A two-year performance evaluation of the materials has been completed by the Oregon State Highway Division's (OSHD's) Materials and Research Section. : On the fir...

78 FR 4464 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-22

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In accordance with the Federal Advisory Committee Act (Pub. L. 92- 463 as amended), the National Science..., Materials Research Science and Engineering Centers Program, Division of Materials Research, Room 1065...

Stochastic Individual-Based Modeling of Bacterial Growth and Division Using Flow Cytometry.

PubMed

García, Míriam R; Vázquez, José A; Teixeira, Isabel G; Alonso, Antonio A

2017-01-01

A realistic description of the variability in bacterial growth and division is critical to produce reliable predictions of safety risks along the food chain. Individual-based modeling of bacteria provides the theoretical framework to deal with this variability, but it requires information about the individual behavior of bacteria inside populations. In this work, we overcome this problem by estimating the individual behavior of bacteria from population statistics obtained with flow cytometry. For this objective, a stochastic individual-based modeling framework is defined based on standard assumptions during division and exponential growth. The unknown single-cell parameters required for running the individual-based modeling simulations, such as cell size growth rate, are estimated from the flow cytometry data. Instead of using directly the individual-based model, we make use of a modified Fokker-Plank equation. This only equation simulates the population statistics in function of the unknown single-cell parameters. We test the validity of the approach by modeling the growth and division of Pediococcus acidilactici within the exponential phase. Estimations reveal the statistics of cell growth and division using only data from flow cytometry at a given time. From the relationship between the mother and daughter volumes, we also predict that P. acidilactici divide into two successive parallel planes.

Ventilation and perfusion imaging by electrical impedance tomography: a comparison with radionuclide scanning.

PubMed

Kunst, P W; Vonk Noordegraaf, A; Hoekstra, O S; Postmus, P E; de Vries, P M

1998-11-01

Electrical impedance tomography (EIT) is a technique that makes it possible to measure ventilation and pulmonary perfusion in a volume that approximates to a 2D plane. The possibility of using EIT for measuring the left-right division of ventilation and perfusion was compared with that of radionuclide imaging. Following routine ventilation (81mKr) and perfusion scanning (99mTc-MAA), EIT measurements were performed at the third and the sixth intercostal level in 14 patients with lung cancer. A correlation (r = 0.98, p < 0.005) between the left-right division for the ventilation measured with EIT and that with 81mKr was found. For the left-right division of pulmonary perfusion a correlation of 0.95 (p < 0.005) was found between the two methods. The reliability coefficient (RC) was calculated for estimating the left-right division with EIT. The RC for the ventilation measurements was 94% and 96% for the perfusion measurements. The correlation analysis for reproducibility of the EIT measurements was 0.95 (p < 0.001) for the ventilation and 0.93 (p < 0.001) for the perfusion measurements. In conclusion, EIT can be regarded as a promising technique to estimate the left-right division of pulmonary perfusion and ventilation.

49 CFR 173.2a - Classification of a material having more than one hazard.

Code of Federal Regulations, 2014 CFR

2014-10-01

... explosives. 3 Denotes an impossible combination. 4 For pesticides only, where a material has the hazards of... 5.2 (organic peroxide) material that meets the definition of any other hazard class or division as...

49 CFR 173.2a - Classification of a material having more than one hazard.

Code of Federal Regulations, 2013 CFR

2013-10-01

... explosives. 3 Denotes an impossible combination. 4 For pesticides only, where a material has the hazards of... 5.2 (organic peroxide) material that meets the definition of any other hazard class or division as...

49 CFR 173.2a - Classification of a material having more than one hazard.

Code of Federal Regulations, 2012 CFR

2012-10-01

... explosives. 3 Denotes an impossible combination. 4 For pesticides only, where a material has the hazards of... 5.2 (organic peroxide) material that meets the definition of any other hazard class or division as...

49 CFR 173.2a - Classification of a material having more than one hazard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... explosives. 3 Denotes an impossible combination. 4 For pesticides only, where a material has the hazards of... 5.2 (organic peroxide) material that meets the definition of any other hazard class or division as...

49 CFR 177.870 - Regulations for passenger carrying vehicles.

Code of Federal Regulations, 2014 CFR

2014-10-01

... war of the Departments of the Army, Navy, and Air Force of the United States Government, are... 45 kg (99 pounds), and the aggregate weight of all such other dangerous articles shall not exceed 225... be transported. (f) Division 6.1 (poisonous) or Division 2.3 (poisonous gas) materials on passenger...

49 CFR 177.870 - Regulations for passenger carrying vehicles.

Code of Federal Regulations, 2013 CFR

2013-10-01

... war of the Departments of the Army, Navy, and Air Force of the United States Government, are... 45 kg (99 pounds), and the aggregate weight of all such other dangerous articles shall not exceed 225... be transported. (f) Division 6.1 (poisonous) or Division 2.3 (poisonous gas) materials on passenger...

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Investigators Division Staff Facilities and Centers Staff Jobs Safety Personnel Resources Committees In Case of ? Click Here! Personnel Safety Personnel MSD EH&S Manager Martin Neitzel 66-242 ext. 6169 MLNeitzel Schwartz 66-250E ext. 4957 nischwartz@lbl.gov Lab Safety Advisory Committee Rep Robert Kaindl 2-354 ext

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Investigators Division Staff Facilities and Centers Staff Jobs Safety Personnel Resources Committees In Case of complete EHS0470, General Employee Radiation Safety (on-line course). Escort is required for visitors who Safety (on-line course) ii. EHS0348 Chemical Hygiene and Safety (on-line course) iii. EHS0470 General

A Model for the Development an Upper-Division Marketing Certificate Program: Professional Sales.

ERIC Educational Resources Information Center

Grahn, Joyce L.

The sequential components of a model for the development of an upper-division marketing certificate program in professional sales are described in this report as they were implemented at the University of Minnesota's General College during Fall 1980. After introductory material examining the responsibilities of the professional sales…

QA RESOURCE MATERIALS TO ASSIST IN DEVELOPING AND WRITING RESEARCH PLANS AT A USEPA OFFICE OF RESEARCH AND DEVELOPMENT DIVISION

EPA Science Inventory

In the process of adapting the Agency's Data Quality Objectives Workshop for presentation at an ORD Research Facility, ownership and consensus approval of the presentation by the Division's research staff was sought. Three groups of researchers, at various levels of responsibilit...

Publications - GMC 96 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

and Facilities Staff Seismic and Well Data Data Reports Contact Us Frequently Asked Questions Ask a Corp.) North cook Inlet Unit A-12 (A-15) well Authors: Core Laboratories Publication Date: 1988 Unit A-12 (A-15) well: Alaska Division of Geological & Geophysical Surveys Geologic Materials

Publications - GMC 216 | Alaska Division of Geological & Geophysical

Science.gov Websites

and Facilities Staff Seismic and Well Data Data Reports Contact Us Frequently Asked Questions Ask a report of the U.S. Navy Fish Creek # 1 well Authors: Core Laboratories Publication Date: 1993 Publisher Fish Creek # 1 well: Alaska Division of Geological & Geophysical Surveys Geologic Materials Center

Publications - GMC 78 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

and Facilities Staff Seismic and Well Data Data Reports Contact Us Frequently Asked Questions Ask a DGGS GMC 78 Publication Details Title: Vitrinite reflectance data for OCS-Y-0344-1 (Mukluk #1) well ) well: Alaska Division of Geological & Geophysical Surveys Geologic Materials Center Data Report 78

Protocol Information Office (PIO) | Division of Cancer Prevention

Cancer.gov

PIO Instructions and Tools Find instructions, forms, and templates for the management of all types of Division of Cancer Prevention clinical trials.Read more about PIO Instructions and Tools Clinical Trials Reference Materials Model clinical agreements, human subject protection and informed consent models, gender and minority inclusion information, and monitoring policy and

49 CFR 173.170 - Black powder for small arms.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Division 1.1 may be reclassed as a Division 4.1 material, for domestic transportation by motor vehicle....58; (b) The total quantity of black powder in one motor vehicle, rail car, or freight container may...) Each package must bear the FLAMMABLE SOLID label. [Amdt. 173-255, 61 FR 50626, Sept. 26, 1996, as...

49 CFR 173.170 - Black powder for small arms.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Division 1.1 may be reclassed as a Division 4.1 material, for domestic transportation by motor vehicle....58; (b) The total quantity of black powder in one motor vehicle, rail car, or freight container may...) Each package must bear the FLAMMABLE SOLID label. [Amdt. 173-255, 61 FR 50626, Sept. 26, 1996, as...

49 CFR 173.170 - Black powder for small arms.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Division 1.1 may be reclassed as a Division 4.1 material, for domestic transportation by motor vehicle....58; (b) The total quantity of black powder in one motor vehicle, rail car, or freight container may...) Each package must bear the FLAMMABLE SOLID label. [Amdt. 173-255, 61 FR 50626, Sept. 26, 1996, as...

49 CFR 173.170 - Black powder for small arms.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Division 1.1 may be reclassed as a Division 4.1 material, for domestic transportation by motor vehicle....58; (b) The total quantity of black powder in one motor vehicle, rail car, or freight container may...) Each package must bear the FLAMMABLE SOLID label. [Amdt. 173-255, 61 FR 50626, Sept. 26, 1996, as...

Christian Ethics. A Teacher Information Bulletin for Division IV.

ERIC Educational Resources Information Center

Saskatchewan Dept. of Education, Regina.

Listed are print and audiovisual materials that support the "Curriculum Guide for Division IV: Christian Ethics" intended for use in grades 10, 11, and 12. The course is designed to help students articulate, reflect upon, and understand what they believe and practice. Cited in this resource manual are textbooks, teacher's guides,…

Evaluation of Basketball-Specific Agility: Applicability of Preplanned and Nonplanned Agility Performances for Differentiating Playing Positions and Playing Levels.

PubMed

Sekulic, Damir; Pehar, Miran; Krolo, Ante; Spasic, Miodrag; Uljevic, Ognjen; Calleja-González, Julio; Sattler, Tine

2017-08-01

Sekulic, D, Pehar, M, Krolo, A, Spasic, M, Uljevic, O, Calleja-González, J, and Sattler, T. Evaluation of basketball-specific agility: applicability of preplanned and nonplanned agility performances for differentiating playing positions and playing levels. J Strength Cond Res 31(8): 2278-2288, 2017-The importance of agility in basketball is well known, but there is an evident lack of studies examining basketball-specific agility performances in high-level players. The aim of this study was to determine the reliability and discriminative validity of 1 standard agility test (test of preplanned agility [change-of-direction speed] over T course, T-TEST), and 4 newly developed basketball-specific agility tests, in defining playing positions and performance levels in basketball. The study comprised 110 high-level male basketball players (height: 194.92 ± 8.09 cm; body mass: 89.33 ± 10.91 kg; age: 21.58 ± 3.92 years). The variables included playing position (Guard, Forward, Center), performance level (first division vs. second division), anthropometrics (body height, body mass, and percentage of body fat), T-TEST, nonplanned basketball agility test performed on dominant (BBAGILdom) and nondominant sides (BBAGILnond), and a preplanned (change-of-direction speed) basketball agility test performed on dominant (BBCODSdom) and nondominant sides (BBCODSnond). The reliability of agility tests was high (intraclass correlation coefficient of 0.81-0.95). Forwards were most successful in the T-TEST (F test: 13.57; p = 0.01). Guards outperformed Centers in BBCODSdom, BBCODSndom, BBAGILdom, and BBAGILnond (F test: 5.06, p = 0.01; 6.57, 0.01; 6.26, 0.01; 3.37, 0.04, respectively). First division Guards achieved better results than second division Guards in BBCODSdom (t: 2.55; p = 0.02; moderate effect size differences), BBAGILdom, and BBAGILnond (t: 3.04 and 3.06, respectively; both p = 0.01 and moderate effect size differences). First division Centers outperformed second division Centers in BBAGILdom (t: 2.50; p = 0.02; moderate effect size differences). The developed basketball-specific agility tests are applicable when defining position-specific agility. Both preplanned and nonplanned agilities are important qualities in differentiating between Guards of 2 performance levels. The results confirmed the importance of testing basketball-specific nonplanned agility when evaluating the performance level of Centers.

Overview of Future of Probabilistic Methods and RMSL Technology and the Probabilistic Methods Education Initiative for the US Army at the SAE G-11 Meeting

NASA Technical Reports Server (NTRS)

Singhal, Surendra N.

2003-01-01

The SAE G-11 RMSL Division and Probabilistic Methods Committee meeting sponsored by the Picatinny Arsenal during March 1-3, 2004 at Westin Morristown, will report progress on projects for probabilistic assessment of Army system and launch an initiative for probabilistic education. The meeting features several Army and industry Senior executives and Ivy League Professor to provide an industry/government/academia forum to review RMSL technology; reliability and probabilistic technology; reliability-based design methods; software reliability; and maintainability standards. With over 100 members including members with national/international standing, the mission of the G-11s Probabilistic Methods Committee is to enable/facilitate rapid deployment of probabilistic technology to enhance the competitiveness of our industries by better, faster, greener, smarter, affordable and reliable product development.

76 FR 35918 - Nixon Presidential Historical Materials; Opening of Materials

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-20

... by the Richard Nixon Presidential Library and Museum, a division of the National Archives and Records... Historical Materials. DATES: The Richard Nixon Presidential Library and Museum intends to make the materials described in this notice available to the public on Wednesday, July 20, 2011, at the Richard Nixon Library...

76 FR 73775 - Information Collection Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-29

... (radioactive) material; (2) more than 25 kg (55 lbs) of a Division 1.1, 1.2, or 1.3 (explosive) material; (3... shipment of hazardous materials in a bulk packaging with a capacity equal to or greater than 13,248 L (3... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No...

77 FR 60482 - Regulatory Guide 5.67, Material Control and Accounting for Uranium Enrichment Facilities...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-03

... Accounting for Uranium Enrichment Facilities Authorized To Produce Special Nuclear Material of Low Strategic... Accounting for Uranium Enrichment Facilities Authorized to Produce Special Nuclear Material of Low Strategic... INFORMATION CONTACT: Glenn Tuttle, Office of Nuclear Material Safety and Safeguards, Division of Fuel Cycle...

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Computational Study of Excited-State Phenomena in Energy Materials Center for X-ray Optics MSD Facilities Ion and Materials Physics Scattering and Instrumentation Science Centers Center for Computational Study of Sciences Centers Center for Computational Study of Excited-State Phenomena in Energy Materials Center for X

49 CFR 176.5 - Application to vessels.

Code of Federal Regulations, 2013 CFR

2013-10-01

... purpose of carrying flammable or combustible liquid cargo in bulk in its own tanks, when only carrying... (explosive) materials, Class 3 (flammable liquids), or Division 2.1 (flammable gas) materials, in which case... Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY...

49 CFR 176.5 - Application to vessels.

Code of Federal Regulations, 2011 CFR

2011-10-01

... purpose of carrying flammable or combustible liquid cargo in bulk in its own tanks, when only carrying... (explosive) materials, Class 3 (flammable liquids), or Division 2.1 (flammable gas) materials, in which case... Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY...

49 CFR 176.5 - Application to vessels.

Code of Federal Regulations, 2012 CFR

2012-10-01

... purpose of carrying flammable or combustible liquid cargo in bulk in its own tanks, when only carrying... (explosive) materials, Class 3 (flammable liquids), or Division 2.1 (flammable gas) materials, in which case... Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY...

49 CFR 176.5 - Application to vessels.

Code of Federal Regulations, 2014 CFR

2014-10-01

... purpose of carrying flammable or combustible liquid cargo in bulk in its own tanks, when only carrying... (explosive) materials, Class 3 (flammable liquids), or Division 2.1 (flammable gas) materials, in which case... Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY...

49 CFR 176.5 - Application to vessels.

Code of Federal Regulations, 2010 CFR

2010-10-01

... purpose of carrying flammable or combustible liquid cargo in bulk in its own tanks, when only carrying... (explosive) materials, Class 3 (flammable liquids), or Division 2.1 (flammable gas) materials, in which case... Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY...

48 CFR 31.205-26 - Material costs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... to the contract. If material is issued from stores, any generally recognized method of pricing such... for all materials, supplies and services that are sold or transferred between any divisions... established practice of the transferring organization to price interorganizational transfers at other than...

48 CFR 31.205-26 - Material costs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... to the contract. If material is issued from stores, any generally recognized method of pricing such... for all materials, supplies and services that are sold or transferred between any divisions... established practice of the transferring organization to price interorganizational transfers at other than...

Investigation of Gallium Nitride Transistor Reliability through Accelerated Life Testing and Modeling

DTIC Science & Technology

2011-12-01

Carbon Cd Cadmium CdS Cadmium Sulfide CMOS Complementary Metal Oxide Semiconductor DC Direct Current DoD Department of Defense EBL Electron...Crane Division [NAVSEA Crane], Crane, Indiana ) are Section 4.1and Section 4.3, Condition 2. Eight devices were stressed for over 1000 hours each and

Synthesis and [superscript 1]H NMR Spectroscopic Elucidation of Five- and Six-Membered D-Ribonolactone Derivatives

ERIC Educational Resources Information Center

Sales, Eric S.; Silveira, Gustavo P.

2015-01-01

Lactone-size identification of [subscript D]-ribonolactone derivatives has been debated for four decades due to complex lactone-ring rearrangements and acetal migration. This laboratory experiment for an upper-division undergraduate organic chemistry laboratory course describes a fast and reliable assignment of lactone-size derivatives from…

Examining Student Rating of Teaching Effectiveness Using FACETS

ERIC Educational Resources Information Center

Mat Daud, Nuraihan; Abu Kassim, Noor Lide

2011-01-01

Students' evaluations of teaching staff can be considered high-stakes, as they are often used to determine promotion, reappointment, and merit pay to academics. Using Facets, the reliability and validity of one student rating questionnaire is analysed. A total of 13,940 respondents of the Human Science Division of International Islamic University…

Subsea pipeline isolation systems: Reliability and costs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Masheder, R.R.

1995-12-31

On the night of 6/7 July 1988 a major oil production platform known as Piper Alpha in the UK sector of the North Sea was destroyed by explosion and fire, with the loss of 167 lives. This led to the appointment of Lord Cullen, a senior Scottish Judge, to hold a Public Inquiry into the Piper Alpha Disaster. The Cullen Enquiry Report consisting of 23 chapters set out in 2 volumes, was published on 12 November 1990. One of the important conclusions drawn by Lord Cullen resulted in a recommendation for studies to be conducted to consider ways of improvingmore » the reliability and reducing the costs of SSIVs (Subsea Isolation Valves) so that it is more often reasonably practicable to install them. To address the Cullen recommendations, a joint industry study was conducted by UKOOA (United Kingdom Offshore Operators Association) and the HSE/OSD (Health and Safety Executive Offshore Safety Division) in conjunction with independent consultants. The results of the studies and the conclusions drawn by UKOOA Pipeline Valve Group and the HSE Offshore Safety Division are presented in this paper.« less

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Synthesis Condensed Matter and Materials Physics Scattering and Instrumentation Science Centers Center for Issue 3, March Issue 2, February Issue 1, January A U.S. Department of Energy National Laboratory

49 CFR 176.164 - Fire precautions and firefighting.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Class 1 (explosive) materials other than those of Division 1.4 (explosive). No welding, burning, cutting... compartment, including a closed vehicle deck space, which contains Class 1 (explosive) materials must be...

49 CFR 176.164 - Fire precautions and firefighting.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Class 1 (explosive) materials other than those of Division 1.4 (explosive). No welding, burning, cutting... compartment, including a closed vehicle deck space, which contains Class 1 (explosive) materials must be...

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The Chemical Technology (CMT) Division is a diverse technical organization with principal emphases in environmental management and development of advanced energy sources. The Division conducts research and development in three general areas: (1) development of advanced power sources for stationary and transportation applications and for consumer electronics, (2) management of high-level and low-level nuclear wastes and hazardous wastes, and (3) electrometallurgical treatment of spent nuclear fuel. The Division also performs basic research in catalytic chemistry involving molecular energy resources, mechanisms of ion transport in lithium battery electrolytes, and the chemistry of technology-relevant materials and electrified interfaces. In addition, the Divisionmore » operates the Analytical Chemistry Laboratory, which conducts research in analytical chemistry and provides analytical services for programs at Argonne National Laboratory (ANL) and other organizations. Technical highlights of the Division`s activities during 1997 are presented.« less

Solid State Division annual progress report for period ending December 31, 1975

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilkinson, M.K.; Young, F.W. Jr.

1976-05-01

Research activities are reported in programs on theoretical solid state physics, physical properties of solids, radiation effects in metals, neutron scattering, research materials, and isotope research materials. (JRD)

Materials and Chemical Sciences Division annual report, 1987

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1988-07-01

Research programs from Lawrence Berkeley Laboratory in materials science, chemical science, nuclear science, fossil energy, energy storage, health and environmental sciences, program development funds, and work for others is briefly described. (CBS)

10 CFR 75.35 - Material status reports.

Code of Federal Regulations, 2010 CFR

2010-01-01

... physical inventory which is taken as part of the material accounting and control procedures required by... instructions may be obtained from the U.S. Nuclear Regulatory Commission, Division of Fuel Cycle Safety and...

10 CFR 72.78 - Nuclear material transaction reports.

Code of Federal Regulations, 2010 CFR

2010-01-01

... writing to the U.S. Nuclear Regulatory Commission, Division of Fuel Cycle Safety and Safeguards... instructions no later than the close of business the next working day. Each licensee who receives the material...

Preservice Elementary Teachers Use Drawings and Make Sets of Materials to Explain Multiplication and Division by Fractions

ERIC Educational Resources Information Center

Rule, Audrey C., Ed.; Hallagan, Jean E., Ed.

2006-01-01

Background: Multiplication and division by fractions are among the most troublesome concepts in the elementary mathematics curriculum. Recent studies have shown that preservice elementary teachers in the United States do not have deep understandings of these concepts. Effective ways to improve preservice teachers' conceptual understanding of these…

Publications - GMC 424 | Alaska Division of Geological & Geophysical

Science.gov Websites

and Facilities Staff Seismic and Well Data Data Reports Contact Us Frequently Asked Questions Ask a , grain density, and petrologic analyses of core from the E. Simpson Test Well #2 well Authors: Nordaq Test Well #2 well: Alaska Division of Geological & Geophysical Surveys Geologic Materials Center

DOE Office of Scientific and Technical Information (OSTI.GOV)

David, S.A.; Goodwin, G.M.; Gardner, K.

This document contains a listing of the written scientific information originating in the Materials Joining (formerly the Welding and Brazing Group), Metals and Ceramics Division, Oak Ridge National Laboratory during 1951 through June 1989. This registry of documents is as much as possible, in the order of issue date. A complete cross-referenced listing of the technical literature of the Metals and Ceramics Division is also available.

Organizing. MAS-108. Waste Isolation Division (WID). Management and Supervisor Training (MAST) Program.

ERIC Educational Resources Information Center

Westinghouse Electric Corp., Carlsbad, NM.

This module is part of a set of management and supervisor training (MAST) materials developed by the Department of Energy for the Waste Isolation Division. Its stated purpose is to enable trainees to organize work activities efficiently and effectively. The first section of the module is an introduction that includes a terminal objective and…

49 CFR 177.841 - Division 6.1 and Division 2.3 materials.

Code of Federal Regulations, 2014 CFR

2014-10-01

... this section, bearing or required to bear a POISON or POISON INHALATION HAZARD label or placard in the... loaded into another closed unit load device; (2) Bearing or required to bear a POISON, POISON GAS or POISON INHALATION HAZARD label in the driver's compartment (including a sleeper berth) of a motor vehicle...

49 CFR 177.841 - Division 6.1 and Division 2.3 materials.

Code of Federal Regulations, 2013 CFR

2013-10-01

... this section, bearing or required to bear a POISON or POISON INHALATION HAZARD label or placard in the... loaded into another closed unit load device; (2) Bearing or required to bear a POISON, POISON GAS or POISON INHALATION HAZARD label in the driver's compartment (including a sleeper berth) of a motor vehicle...

49 CFR 177.841 - Division 6.1 and Division 2.3 materials.

Code of Federal Regulations, 2012 CFR

2012-10-01

... this section, bearing or required to bear a POISON or POISON INHALATION HAZARD label or placard in the... loaded into another closed unit load device; (2) Bearing or required to bear a POISON, POISON GAS or POISON INHALATION HAZARD label in the driver's compartment (including a sleeper berth) of a motor vehicle...

49 CFR 177.841 - Division 6.1 and Division 2.3 materials.

Code of Federal Regulations, 2011 CFR

2011-10-01

... this section, bearing or required to bear a POISON or POISON INHALATION HAZARD label or placard in the... loaded into another closed unit load device; (2) Bearing or required to bear a POISON, POISON GAS or POISON INHALATION HAZARD label in the driver's compartment (including a sleeper berth) of a motor vehicle...

Publications - GMC 193 | Alaska Division of Geological & Geophysical

Science.gov Websites

Surveys Skip to content State of Alaska myAlaska My Government Resident Business in Alaska Visiting Alaska State Employees DGGS State of Alaska search Alaska Division of Geological & Geophysical materials: Alaska State F #1, washed cuttings (13,980' - 13,990'); West Mikkelsen State #1, Canning River

Publications - GMC 183 | Alaska Division of Geological & Geophysical

Science.gov Websites

Surveys Skip to content State of Alaska myAlaska My Government Resident Business in Alaska Visiting Alaska State Employees DGGS State of Alaska search Alaska Division of Geological & Geophysical materials: AK State C #1, Bush Federal #1, Echooka Unit #1, Fin Creek Unit #1, E. De K. Leffingwell #1, Nora

Publications - DDS 11 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

Publications Geologic Materials Center General Information Inventory Monthly Report Hours and Location Policy DGGS DDS 11 Publication Details Title: Geologic Materials Center Inventory Authors: DGGS Staff ): Alaska Statewide Bibliographic Reference DGGS Staff, 2016, Geologic Materials Center Inventory: Alaska

49 CFR 176.166 - Transport of Class 1 (explosive) materials on passenger vessels.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false Transport of Class 1 (explosive) materials on....166 Transport of Class 1 (explosive) materials on passenger vessels. (a) Only the following Class 1 (explosive) materials may be transported as cargo on passenger vessels: (1) Division 1.4 (explosive...

49 CFR 176.166 - Transport of Class 1 (explosive) materials on passenger vessels.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Transport of Class 1 (explosive) materials on....166 Transport of Class 1 (explosive) materials on passenger vessels. (a) Only the following Class 1 (explosive) materials may be transported as cargo on passenger vessels: (1) Division 1.4 (explosive...

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Synthesis Condensed Matter and Materials Physics Scattering and Instrumentation Science Centers Center for materials and phenomena at multiple time and length scales. Through our core programs and research centers Berkeley Lab Berkeley Lab A-Z Index Phone Book Jobs Search DOE Search MSD Go MSD - Materials

Conceptual assessment tool for advanced undergraduate electrodynamics

NASA Astrophysics Data System (ADS)

Baily, Charles; Ryan, Qing X.; Astolfi, Cecilia; Pollock, Steven J.

2017-12-01

As part of ongoing investigations into student learning in advanced undergraduate courses, we have developed a conceptual assessment tool for upper-division electrodynamics (E&M II): the Colorado UppeR-division ElectrodyNamics Test (CURrENT). This is a free response, postinstruction diagnostic with 6 multipart questions, an optional 3-question preinstruction test, and accompanying grading rubrics. The instrument's development was guided by faculty-consensus learning goals and research into common student difficulties. It can be used to gauge the effectiveness of transformed pedagogy, and to gain insights into student thinking in the covered topic areas. We present baseline data representing 500 students across 9 institutions, along with validity, reliability, and discrimination measures of the instrument and scoring rubric.

Reducing barriers to mental health care for student-athletes: An integrated care model.

PubMed

Sudano, Laura E; Collins, Greg; Miles, Christopher M

2017-03-01

Research suggests that National Collegiate Athletic Association (NCAA) Division I student-athletes have higher levels of stress and other behavioral health issues, including substance use, than nonathletes. For several reasons, student-athletes may be less likely to admit to behavioral health issues and seek mental health care. Integrated care is a model of care that integrates behavioral health into a medical practice. This article explores the newly released NCAA Best Mental Health Practice guidelines and the application of integrated care to a Division I athletic training room setting using the three-worldview framework for successful integration, incorporating clinical outcomes, operational reliability, and financial stability. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Gear systems for advanced turboprops

NASA Technical Reports Server (NTRS)

Wagner, Douglas A.

1987-01-01

A new generation of transport aircraft will be powered by efficient, advanced turboprop propulsion systems. Systems that develop 5,000 to 15,000 horsepower have been studied. Reduction gearing for these advanced propulsion systems is discussed. Allison Gas Turbine Division's experience with the 5,000 horsepower reduction gearing for the T56 engine is reviewed and the impact of that experience on advanced gear systems is considered. The reliability needs for component design and development are also considered. Allison's experience and their research serve as a basis on which to characterize future gear systems that emphasize low cost and high reliability.

Interim reliability-evaluation program: analysis of the Browns Ferry, Unit 1, nuclear plant. Appendix C - sequence quantification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mays, S.E.; Poloski, J.P.; Sullivan, W.H.

1982-07-01

This report describes a risk study of the Browns Ferry, Unit 1, nuclear plant. The study is one of four such studies sponsored by the NRC Office of Research, Division of Risk Assessment, as part of its Interim Reliability Evaluation Program (IREP), Phase II. This report is contained in four volumes: a main report and three appendixes. Appendix C generally describes the methods used to estimate accident sequence frequency values. Information is presented concerning the approach, example collection, failure data, candidate dominant sequences, uncertainty analysis, and sensitivity analysis.

A Conceptual Design for a Reliable Optical Bus (ROBUS)

NASA Technical Reports Server (NTRS)

Miner, Paul S.; Malekpour, Mahyar; Torres, Wilfredo

2002-01-01

The Scalable Processor-Independent Design for Electromagnetic Resilience (SPIDER) is a new family of fault-tolerant architectures under development at NASA Langley Research Center (LaRC). The SPIDER is a general-purpose computational platform suitable for use in ultra-reliable embedded control applications. The design scales from a small configuration supporting a single aircraft function to a large distributed configuration capable of supporting several functions simultaneously. SPIDER consists of a collection of simplex processing elements communicating via a Reliable Optical Bus (ROBUS). The ROBUS is an ultra-reliable, time-division multiple access broadcast bus with strictly enforced write access (no babbling idiots) providing basic fault-tolerant services using formally verified fault-tolerance protocols including Interactive Consistency (Byzantine Agreement), Internal Clock Synchronization, and Distributed Diagnosis. The conceptual design of the ROBUS is presented in this paper including requirements, topology, protocols, and the block-level design. Verification activities, including the use of formal methods, are also discussed.

Advanced Gas Turbine (AGT) Technology Development Project

NASA Technical Reports Server (NTRS)

1987-01-01

This report is the eleventh in the series of Technical Summary reports for the Advanced Gas Turbine (AGT) Technology Development Project, authorized under NASA Contract DEN3-167, and sponsored by the Department of Energy (DOE). This report was prepared by Garrett Turbine Engine Company, A Division of the Garrett Corporation, and includes information provided by Ford Motor Company, the Standard Oil Company, and AiResearch Casting Company. This report covers plans and progress for the period July 1, 1985 through June 30, 1986. Technical progress during the reported period was highlighted by the 85-hour endurance run of an all-ceramic engine operating in the 2000 to 2250 F temperature regime. Component development continued in the areas of the combustion/fuel injection system, regenerator and seals system, and ceramic turbine rotor attachment design. Component rig testing saw further refinements. Ceramic materials showed continued improvements in required properties for gas turbine applications; however, continued development is needed before performance and reliability goals can be set.

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Synthesis Condensed Matter and Materials Physics Scattering and Instrumentation Science Centers Center for Berkeley National Laboratory 1 Cyclotron Road MS 66R0200 Berkeley CA 94720 510-486-4957 A U.S. Department

49 CFR 171.8 - Definitions and abbreviations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... definitions relating to radioactive materials. Rail car means a car designed to carry freight or non-passenger... Materials Safety Administration. Aerosol means any non-refillable receptacle containing a gas compressed... Division 6.1 Packing Group III material) liquid, paste, or powder and fitted with a self-closing release...

49 CFR 171.8 - Definitions and abbreviations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... definitions relating to radioactive materials. Rail car means a car designed to carry freight or non-passenger... Materials Safety Administration. Aerosol means any non-refillable receptacle containing a gas compressed... Division 6.1 Packing Group III material) liquid, paste, or powder and fitted with a self-closing release...

49 CFR 171.8 - Definitions and abbreviations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... definitions relating to radioactive materials. Rail car means a car designed to carry freight or non-passenger... Materials Safety Administration. Aerosol means any non-refillable receptacle containing a gas compressed... Division 6.1 Packing Group III material) liquid, paste, or powder and fitted with a self-closing release...

49 CFR 171.8 - Definitions and abbreviations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... definitions relating to radioactive materials. Rail car means a car designed to carry freight or non-passenger... Materials Safety Administration. Aerosol means any non-refillable receptacle containing a gas compressed... Division 6.1 Packing Group III material) liquid, paste, or powder and fitted with a self-closing release...

Improved materials systems in marine piling after nine years of exposure in Yaquina Bay : Newport, Oregon : state study : research.

DOT National Transportation Integrated Search

1990-02-01

From 1979 to 1983 the Oregon State Highway Division participated with the FHWA in a demonstration Project to evaluate the feasibility of manufacturing precast, prestressed marine piles from advanced structural materials. The materials that were evalu...

An Analysis of the Ratings and Interrater Reliability of High School Band Contests

ERIC Educational Resources Information Center

Hash, Phillip M.

2012-01-01

The purpose of this study was to examine procedures for analyzing ratings of large-group festivals and provide data with which to compare results from similar events. Data consisted of ratings from senior division concert band contests sponsored by the South Carolina Band Directors Association from 2008 to 2010. Three concert-performance and two…

Development of an Instrument for Measuring Self-Efficacy in Cell Biology

ERIC Educational Resources Information Center

Reeve, Suzanne; Kitchen, Elizabeth; Sudweeks, Richard R.; Bell, John D.; Bradshaw, William S.

2011-01-01

This article describes the development of a ten-item scale to assess biology majors' self-efficacy towards the critical thinking and data analysis skills taught in an upper-division cell biology course. The original seven-item scale was expanded to include three additional items based on the results of item analysis. Evidence of reliability and…

Communications. MAS-106. Waste Isolation Division (WID). Management and Supervisor Training (MAST) Program.

ERIC Educational Resources Information Center

Westinghouse Electric Corp., Carlsbad, NM.

This module is part of a set of management and supervisor training (MAST) materials developed by the Department of Energy for the Waste Isolation Division. Its stated purpose is to enable trainees to communicate effectively in the workplace. The first section of the module is an introduction that includes a terminal objective and opening remarks…

Introduction to the MAST Program. MAS-100. Waste Isolation Division (WID). Management and Supervisor Training (MAST) Program.

ERIC Educational Resources Information Center

Westinghouse Electric Corp., Carlsbad, NM.

This module is part of a set of management and supervisor training (MAST) materials developed by the Department of Energy for the Waste Isolation Division. Its stated purpose is to provide participants with knowledge and skills necessary to take full advantage of the MAST learning experience. The module contains program guidelines, sample…

New agrophysics divisions: application of ANFIS, fuzzy indicator modeling, physic-technical bases of plant breeding, and materials based on humic acids (review)

USDA-ARS?s Scientific Manuscript database

This work is devoted to review the new scientific divisions that emerged in agrophysics in the last 10-15 years. Among them are the following: 1) application of Adaptive Neuro-Fuzzy Inference System (ANFIS), 2) development and application of fuzzy indicator modeling, 3) agrophysical and physic-tech...

NASA Microgravity Materials Science Conference

NASA Technical Reports Server (NTRS)

Gillies, D. C. (Compiler); McCauley, D. E. (Compiler)

1999-01-01

The Microgravity Materials Science Conference was held July 14-16, 1998 at the Von Braun Center in Huntsville, AL. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division at NASA Headquarters, and hosted by the NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications. It was the third NASA conference of this type in the microgravity materials science discipline. The microgravity science program sponsored approximately 125 investigations and 100 principal investigators in FY98, almost all of whom made oral or poster presentations at this conference. The conference's purpose was to inform the materials science community of research opportunities in reduced gravity in preparation for a NASA Research Announcement scheduled for release in late 1998 by the Microgravity Research Division at NASA Headquarters. The conference was aimed at materials science researchers from academia, industry, and government. A tour of the Marshall Space Flight Center microgravity research facilities was held on July 16, 1998. This volume is comprised of the research reports submitted by the principal investigators after the conference.

NASA Microgravity Materials Science Conference

NASA Technical Reports Server (NTRS)

Szofran, Frank R. (Compiler); McCauley, D. (Compiler); Walker, C. (Compiler)

1996-01-01

The Microgravity Materials Science Conference was held June 10-11, 1996 at the Von Braun Civic Center in Huntsville, AL. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Science and Applications Division at NASA Headquarters, and hosted by the NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the second NASA conference of this type in the microgravity materials science discipline. The microgravity science program sponsored approximately 80 investigations and 69 principal investigators in FY96, all of whom made oral or poster presentations at this conference. The conference's purpose was to inform the materials science community of research opportunities in reduced gravity in preparation for a NASA Research Announcement (NRA) scheduled for release in late 1996 by the Microgravity Science and Applications Division at NASA Headquarters. The conference was aimed at materials science researchers from academia, industry, and government. A tour of the MSFC microgravity research facilities was held on June 12, 1996. This volume is comprised of the research reports submitted by the principal investigators after the conference and presentations made by various NASA microgravity science managers.

76 FR 56872 - Information Collection Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-14

...- controlled quantity of a Class 7 (radioactive) material; (2) more than 25 kg (55 lbs) of a Division 1.1, 1.2... inhalation in hazard zone A; (4) a shipment of hazardous materials in a bulk packaging with a capacity equal... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No...

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Computational Study of Excited-State Phenomena in Energy Materials Center for X-ray Optics MSD Facilities Ion Excited-State Phenomena in Energy Materials Center for X-ray Optics MSD Facilities Ion Beam Analysis Behavior of Lithium Metal across a Rigid Block Copolymer Electrolyte Membrane. Journal of the

An evaluation of improved structural materials in marine piling.

DOT National Transportation Integrated Search

1980-11-01

A study to evaluate the production and field performance of marine piling fabricated with improved structural materials is currently being performed by the Oregon State Highway Division under the sponsorship of the Federal Highway Administration. In ...

49 CFR 173.132 - Class 6, Division 6.1-Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 173.132 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Definitions Classification, Packing Group Assignments and Exceptions...

49 CFR 173.132 - Class 6, Division 6.1-Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 173.132 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS SHIPPERS-GENERAL REQUIREMENTS FOR SHIPMENTS AND PACKAGINGS Definitions Classification, Packing Group Assignments and Exceptions...

Electric Power Monthly, June 1990

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-09-13

The EPM is prepared by the Electric Power Division; Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), Department of Energy. This publication provides monthly statistics at the national, Census division, and State levels for net generation, fuel consumption, fuel stocks, quantity and quality of fuel, electricity sales, and average revenue per kilowatthour of electricity sold. Data on net generation are also displayed at the North American Electric Reliability Council (NERC) region level. Additionally, company and plant level information are published in the EPM on capability of new plants, net generation, fuel consumption, fuel stocks, quantity andmore » quality of fuel, and cost of fuel. Quantity, quality, and cost of fuel data lag the net generation, fuel consumption, fuel stocks, electricity sales, and average revenue per kilowatthour data by 1 month. This difference in reporting appears in the national, Census division, and State level tables. However, at the plant level, all statistics presented are for the earlier month for the purpose of comparison. 40 tabs.« less

Aeroflex Technology as Class-Y Demonstrator

NASA Technical Reports Server (NTRS)

Suh, Jong-ook; Agarwal, Shri; Popelar, Scott

2014-01-01

Modern space field programmable gate array (FPGA) devices with increased functional density and operational frequency, such as Xilinx Virtex 4 (V4) and S (V5), are packaged in non-hermetic ceramic flip chip forms. These next generation space parts were not qualified to the MIL-PRF-38535 Qualified Manufacturer Listing (QML) class-V when they were released because class-V was only intended for hermetic parts. In order to bring Xilinx V5 type packages into the QML system, it was suggested that class-Y be set up as a new category. From 2010 through 2014, a JEDEC G12 task group developed screening and qualification requirements for Class-Y products. The Document Standardization Division of the Defense Logistics Agency (DLA) has completed an engineering practice study. In parallel with the class-Y efforts, the NASA Electronic Parts and Packaging (NEPP) program has funded JPL to study potential reliability issues of the class-Y products. The major hurdle of this task was the absence of adequate research samples. Figure 1-1 shows schematic diagrams of typical structures of class-Y type products. Typically, class-Y products are either in ceramic flip chip column grid array (CGA) or land grid array (LGA) form. In class-Y packages, underfill and heat spread adhesive materials are directly exposed to the spacecraft environment due to their non-hermeticity. One of the concerns originally raised was that the underfill material could degrade due to the spacecraft environment and negatively impact the reliability of the package. In order to study such issues, it was necessary to use ceramic daisy chain flip chip package samples so that continuity of flip chip solder bumps could be monitored during the reliability tests. However, none of the commercially available class-Y daisy chain parts had electrical connections through flip chip solder bumps; only solder columns were daisy chained, which made it impossible to test continuity of flip chip solder bumps without using extremely costly functional parts. Among space parts manufacturers who were interested in producing class-Y products, Aeroflex Microelectronic Solutions-HiRel had been developing assembly processes using their internal R&D classy type samples. In early 2012, JPL and Aeroflex initiated a collaboration to study reliability of the Aeroflex technology as a class-Y demonstrator.

Power Electronics Packaging Reliability | Transportation Research | NREL

Science.gov Websites

interface materials, are a key enabling technology for compact, lightweight, low-cost, and reliable power , reliability, and cost. High-temperature bonded interface materials are an important facilitating technology for compact, lightweight, low-cost, reliable power electronics packaging that fully utilizes the

In Conversation With Materials Scientist Ron Zuckermann

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ron Zuckerman

2009-11-18

Nov. 11, 2009: Host Alice Egan of Berkeley Lab's Materials Sciences Division interviews scientists about their lives and work in language everyone can understand. Her guest Berkeley Lab's Ron Zuckerman, who discusses biological nanostructures and the world of peptoids.

ENVIRONMENTAL TOOLS FOR MATERIAL AND PROCESS SELECTION

EPA Science Inventory

A number of tools are being used within the Sustainable Technology Division of the U.S. Environmental Protection Agency to provide decision-makers with information on environmentally favorable materials and processes. These tools include LCA (Life Cycle Assessment), GREENSCOPE (...

Repeatability of testing procedures for resilient modulus and fatigue.

DOT National Transportation Integrated Search

1989-04-01

Extensive use of diametral resilient modulus and fatigue testing is made by the Oregon State Highway Division to evaluate asphaltic concrete materials. Test results on similar materials (e.g., adjacent field cores), however, often indicate a poor lev...

In Conversation With Materials Scientist Ron Zuckermann

ScienceCinema

Ron Zuckerman

2017-12-09

Nov. 11, 2009: Host Alice Egan of Berkeley Lab's Materials Sciences Division interviews scientists about their lives and work in language everyone can understand. Her guest Berkeley Lab's Ron Zuckerman, who discusses biological nanostructures and the world of peptoids.

IFLA General Conference, 1992. Division of Collections and Services: Section on Acquisition and Exchange; Section on Serial Publications; Section on Interlending and Document Delivery. Papers.

ERIC Educational Resources Information Center

International Federation of Library Associations and Institutions, London (England).

Eight papers for the Collections and Services Division of the International Federation of Library Associations and Institutions that were given at the 1992 annual meeting are presented. These papers deal with the acquisition and exchange of library materials, interlending, and serial publications. The following papers are included: (1) "Why…

Publications - GMC 368 | Alaska Division of Geological & Geophysical

Science.gov Websites

Hill, Titaluk Test #1, N. Inigok #1, Drew Pt. #1, Gubik Test #1, Inigok #1 and Oumalik Test #1 wells . Dalton #1, Seabee #1, Sentinel Hill, Titaluk Test #1, N. Inigok #1, Drew Pt. #1, Gubik Test #1, Inigok #1 and Oumalik Test #1 wells: Alaska Division of Geological & Geophysical Surveys Geologic Materials

Problem Solving and Decision Making. MAS-105. Waste Isolation Division (WID). Management and Supervisor Training (MAST) Program.

ERIC Educational Resources Information Center

Westinghouse Electric Corp., Carlsbad, NM.

This module is part of a set of management and supervisor training (MAST) materials developed by the Department of Energy for the Waste Isolation Division. Its stated purpose is to enable trainees to solve problems and make decisions in an efficient and effective manner. The first section of the module is an introduction that includes a terminal…

A Fundamental Study of the Electromagnetic Properties of Advanced Composite Materials

DTIC Science & Technology

1978-07-01

MKDC), Space and Missile Systems Organization (SAMSO). Aeronautical System Division (ASD), Electronic Systems Division ( ESD ), Air Force Avionics...discussions, the work reported involved only one fiber type--Thornel T300 as used in Narmco 5208 pre-preg tapes . Individual graphite fibers have radii... teflon coated tweezers to separate individual fibers from the bundle. Microscopic observation and a steady hand during this procedure improved the

A Humbug Approach to Economics. Division of Labor-Specialization. Teacher's Guide [and] Student Package, Capsules No. 1, 2, and 3.

ERIC Educational Resources Information Center

Humburg, Judy

Intended for above average students in grades 4-6, this unit contains student materials and teacher's guide for three sequential lessons on the economic concepts of specialization and division of labor. The units are presented in story form accompanied by cartoon illustrations. In section one students distinguish between goods and services and…

Lewis Structures Technology, 1988. Volume 3: Structural Integrity Fatigue and Fracture Wind Turbines HOST

NASA Technical Reports Server (NTRS)

1988-01-01

The charter of the Structures Division is to perform and disseminate results of research conducted in support of aerospace engine structures. These results have a wide range of applicability to practioners of structural engineering mechanics beyond the aerospace arena. The specific purpose of the symposium was to familiarize the engineering structures community with the depth and range of research performed by the division and its academic and industrial partners. Sessions covered vibration control, fracture mechanics, ceramic component reliability, parallel computing, nondestructive evaluation, constitutive models and experimental capabilities, dynamic systems, fatigue and damage, wind turbines, hot section technology (HOST), aeroelasticity, structural mechanics codes, computational methods for dynamics, structural optimization, and applications of structural dynamics, and structural mechanics computer codes.

Combination Antimicrobial Nanocomposite Materials for Neutralization of Biological Threat Agents (PREPRINT)

DTIC Science & Technology

2008-09-01

AFRL-RX-TY-TP-2008-4601 PREPRINT COMBINATION ANTIMICROBIAL NANOCOMPOSITE MATERIALS FOR NEUTRALIZATION OF BIOLOGICAL THREAT AGENTS...AIRBASE TECHNOLOGIES DIVISION MATERIALS AND MANUFACTURING DIRECTORATE AIR FORCE RESEARCH LABORATORY AIR FORCE MATERIEL COMMAND 139 BARNES DRIVE, SUITE 2...a composite material that combines the protein and inorganic components. The process can be mimicked in vitro to some degree, providing methods for

49 CFR 177.838 - Class 4 (flammable solid) materials, Class 5 (oxidizing) materials, and Division 4.2 (pyroforic...

Code of Federal Regulations, 2014 CFR

2014-10-01

... (flammable solid) or Class 5 (oxidizing) materials shall be contained entirely within the body of the motor.... Special care shall also be taken in the loading of any motor vehicle with Class 4 (flammable solid) or... 49 Transportation 2 2014-10-01 2014-10-01 false Class 4 (flammable solid) materials, Class 5...

49 CFR 177.838 - Class 4 (flammable solid) materials, Class 5 (oxidizing) materials, and Division 4.2 (pyroforic...

Code of Federal Regulations, 2013 CFR

2013-10-01

... (flammable solid) or Class 5 (oxidizing) materials shall be contained entirely within the body of the motor.... Special care shall also be taken in the loading of any motor vehicle with Class 4 (flammable solid) or... 49 Transportation 2 2013-10-01 2013-10-01 false Class 4 (flammable solid) materials, Class 5...

49 CFR 177.838 - Class 4 (flammable solid) materials, Class 5 (oxidizing) materials, and Division 4.2 (pyroforic...

Code of Federal Regulations, 2012 CFR

2012-10-01

... (flammable solid) or Class 5 (oxidizing) materials shall be contained entirely within the body of the motor.... Special care shall also be taken in the loading of any motor vehicle with Class 4 (flammable solid) or... 49 Transportation 2 2012-10-01 2012-10-01 false Class 4 (flammable solid) materials, Class 5...

76 FR 46329 - Notice of Issuance of Renewed Materials License No. SNM-2504; Department of Energy; Fort St...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-02

... Materials License No. SNM-2504; Department of Energy; Fort St. Vrain Independent Spent Fuel Storage... INFORMATION CONTACT: Christopher Staab, Project Manager, Division of Spent Fuel Storage and Transportation... issued renewed Materials License No. SNM-2504 to the Department of Energy (DOE) for the receipt...

Course and Curriculum Improvement Materials: Mathematics, Science, Social Sciences - Elementary, Intermediate, Secondary.

ERIC Educational Resources Information Center

National Science Foundation, Washington, DC.

This is a list of curriculum improvement materials produced by major course and curriculum projects supported by the National Science Foundation's Division of Pre-College Education in Science. The materials are grouped by educational level (elementary, intermediate, and secondary) and within each level by broad discipline groupings (mathematics,…

78 FR 42805 - Nixon Presidential Historical Materials: Opening of Materials

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-17

... Library in Yorba Linda. The newly released tapes will also be available on August 21, 2013 on the Web at... Nixon Presidential Historical Materials by the Richard Nixon Presidential Library and Museum, a division... required by law, including the PRMPA. DATES: The Richard Nixon Presidential Library and Museum intends to...

IFLA General Conference, 1984. Special Libraries Division. Section on Geography and Map Libraries. Papers.

ERIC Educational Resources Information Center

International Federation of Library Associations, The Hague (Netherlands).

This document comprises two papers on geography and map libraries and cartographic materials which were presented at the 1984 IFLA general conference. "Cartographic Materials as a Resource for National and Regional Planning and Development," by E. Hans van de Waal (Utrecht), addresses the importance of cartographic materials for…

49 CFR 19.6 - Availability of material referenced in this part.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Availability of material referenced in this part... ORGANIZATIONS General § 19.6 Availability of material referenced in this part. (a) Copies of Federal Transit... Division at (202) 366-4865. (b) Copies of Federal Aviation Administration (FAA) documents identified in...

49 CFR 19.6 - Availability of material referenced in this part.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 1 2012-10-01 2012-10-01 false Availability of material referenced in this part... ORGANIZATIONS General § 19.6 Availability of material referenced in this part. (a) Copies of Federal Transit... Division at (202) 366-4865. (b) Copies of Federal Aviation Administration (FAA) documents identified in...

49 CFR 19.6 - Availability of material referenced in this part.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 1 2013-10-01 2013-10-01 false Availability of material referenced in this part... ORGANIZATIONS General § 19.6 Availability of material referenced in this part. (a) Copies of Federal Transit... Division at (202) 366-4865. (b) Copies of Federal Aviation Administration (FAA) documents identified in...

49 CFR 19.6 - Availability of material referenced in this part.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 1 2014-10-01 2014-10-01 false Availability of material referenced in this part... ORGANIZATIONS General § 19.6 Availability of material referenced in this part. (a) Copies of Federal Transit... Division at (202) 366-4865. (b) Copies of Federal Aviation Administration (FAA) documents identified in...

49 CFR 19.6 - Availability of material referenced in this part.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 1 2011-10-01 2011-10-01 false Availability of material referenced in this part... ORGANIZATIONS General § 19.6 Availability of material referenced in this part. (a) Copies of Federal Transit... Division at (202) 366-4865. (b) Copies of Federal Aviation Administration (FAA) documents identified in...

Microfluidic circuit designs for performing fluidic manipulations that reduce the number of pumping sources and fluid reservoirs

DOEpatents

Jacobson, Stephen C [Knoxville, TN; Ramsey, J Michael [Knoxville, TN

2001-01-01

A microfabricated device and method for proportioning and mixing biological or chemical materials by pressure- or vacuum-driven flow is disclosed. The microfabricated device mixes a plurality of materials in volumetric proportions controlled by the flow resistances of tributary reagent channels through which the materials are transported. The microchip includes two or more tributary reagent channels combining at one or more junctions to form one or more mixing channels. By varying the geometries of the channels (length, cross section, etc.), a plurality of reagent materials can be mixed at a junction such that the proportions of the reagent materials in the mixing channel depend on a ratio of the channel geometries and material properties. Such an approach facilitates flow division on the microchip without relying on techniques external to the microchip. Microchannel designs that provide the necessary flow division to accomplish valving operations using a minimum of pressure or vacuum sources are also described. In addition, microchannel designs that accomplish fluidic operation utilizing a minimal number of fluidic reservoirs are disclosed.

Assessing Learning Outcomes in Middle-Division Classical Mechanics: The Colorado Classical Mechanics and Math Methods Instrument

ERIC Educational Resources Information Center

Caballero, Marcos D.; Doughty, Leanne; Turnbull, Anna M.; Pepper, Rachel E.; Pollock, Steven J.

2017-01-01

Reliable and validated assessments of introductory physics have been instrumental in driving curricular and pedagogical reforms that lead to improved student learning. As part of an effort to systematically improve our sophomore-level classical mechanics and math methods course (CM 1) at CU Boulder, we have developed a tool to assess student…

A Survey of Approaches Used in Teaching Reading in Early Childhood Classes in Dagoretti and Westlands Divisions, Nairobi County, Kenya

ERIC Educational Resources Information Center

Marima, Esther Wairimu

2016-01-01

Reading proficiency has been identified as one of the most reliable indicators of whether a learner will attain the competence needed to achieve academic success and contribute actively to society. Research findings in Kenyan primary and secondary schools reveal inadequate reading skills among the students. There are different approaches in…

NTRE extended life feasibility assessment

NASA Technical Reports Server (NTRS)

1993-01-01

Results of a feasibility analysis of a long life, reusable nuclear thermal rocket engine are presented in text and graph form. Two engine/reactor concepts are addressed: the Particle Bed Reactor (PBR) design and the Commonwealth of Independent States (CIS) concept. Engine design, integration, reliability, and safety are addressed by various members of the NTRE team from Aerojet Propulsion Division, Energopool (Russia), and Babcock & Wilcox.

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Computational Study of Excited-State Phenomena in Energy Materials Center for X-ray Optics MSD Facilities Ion Facilities and Centers Staff Center for X-ray Optics Patrick Naulleau Director 510-486-4529 2-432 PNaulleau

Publications - RI 94-25 | Alaska Division of Geological & Geophysical

Science.gov Websites

-materials map of the Anchorage C-7 NW Quadrangle, Alaska, scale 1:25,000 (1.4 M) Digital Geospatial Data Digital Geospatial Data Anchorage C-7 NW Derivative materials Data File Format File Size Info Download

Publications - RI 94-26 | Alaska Division of Geological & Geophysical

Science.gov Websites

-materials map of the Anchorage C-8 NE Quadrangle, Alaska, scale 1:25,000 (3.8 M) Digital Geospatial Data Digital Geospatial Data Anchorage C-8 NE Derivative materials Data File Format File Size Info Download

Publications - RI 94-27 | Alaska Division of Geological & Geophysical

Science.gov Websites

-materials map of the Anchorage C-8 NW Quadrangle, Alaska, scale 1:25,000 (676.0 M) Digital Geospatial Data Digital Geospatial Data Anchorage C-8 NW Derivative materials Data File Format File Size Info Download

Publications - RI 94-24 | Alaska Division of Geological & Geophysical

Science.gov Websites

-materials map of the Anchorage C-7 NE Quadrangle, Alaska, scale 1:25,000 (2.4 M) Digital Geospatial Data Digital Geospatial Data Anchorage C-7 NE Derivative materials Data File Format File Size Info Download

DETERMINATION OF SORPTION PARAMETERS FOR 36 VOC/MATERIAL COMBINATIONS

EPA Science Inventory

EPA's Air Pollution Prevention and Control Division is currently investigating sorptive interactions (sink effects) of volatile organic compounds and semi-volatile organic compounds when exposed to common indoor surface materials. The objective is to recommend the best sink mode...

Division of energy biosciences: Annual report and summaries of FY 1995 activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-04-01

The mission of the Division of Energy Biosciences is to support research that advances the fundamental knowledge necessary for the future development of biotechnologies related to the Department of Energy`s mission. The departmental civilian objectives include effective and efficient energy production, energy conservation, environmental restoration, and waste management. The Energy Biosciences program emphasizes research in the microbiological and plant sciences, as these understudied areas offer numerous scientific opportunities to dramatically influence environmentally sensible energy production and conservation. The research supported is focused on the basic mechanisms affecting plant productivity, conversion of biomass and other organic materials into fuels and chemicalsmore » by microbial systems, and the ability of biological systems to replace energy-intensive or pollutant-producing processes. The Division also addresses the increasing number of new opportunities arising at the interface of biology with other basic energy-related sciences such as biosynthesis of novel materials and the influence of soil organisms on geological processes.« less

Astrium Technological Roadmaps for the Next Generation of Launchers Challenges

NASA Astrophysics Data System (ADS)

Larnac, Guy

2014-06-01

Main requirement on Ariane 6 are robustness, overall ownership cost and environmental impacts. To be able to meet these requirements it's mandatory to modify our usual way of working and to think the development and qualification of technologies differently. Airbus Defence and Space in the domain of materials, technologies and structures proposes a vision which address these points declined at different level:- Selection of key metallic and composite technologies to reduce drastically the cost of manufacturing,- Implementation of robust and economical way of assembly, promoting adhesive bonding and innovative technologies- Introducing virtual testing approach coupled with advanced methods and process simulation- Introduction of in-line monitoring to reduce cost of control- Implementation of the design for environment methodology with life cycle analysis to support the choice of technologies and materials- Development of EADS common materials to get benefice of aeronautic supply chain and communalitiesTo be efficient it seems evident and mandatory to develop all these approaches in an integrated and coordinated way. Advanced technologies and methodologies are supported by a strong network of collaboration enabling the integration of upstream ideas and concepts. This network is not only focused on low TRL level. Within EADS divisions intensive collaboration is deployed in order to get synergies. On the other side it's also mandatory for reliability and obsolescence issues to take care and master the supply chain.Additive layer manufacturing and thermoplastic based composite are directly concerned by this problematic. We present how, in the domain of materials and structures, aeronautic materials are considered first and how the mechanism of common qualification shared within EADS is now developed.This vision is being implemented within Airbus Defence and Space, described and reported through roadmaps. These roadmaps are the core of Airbus defence and Space strategies for the incoming years.

Nanoscale deformation measurements for reliability assessment of material interfaces

NASA Astrophysics Data System (ADS)

Keller, Jürgen; Gollhardt, Astrid; Vogel, Dietmar; Michel, Bernd

2006-03-01

With the development and application of micro/nano electronic mechanical systems (MEMS, NEMS) for a variety of market segments new reliability issues will arise. The understanding of material interfaces is the key for a successful design for reliability of MEMS/NEMS and sensor systems. Furthermore in the field of BIOMEMS newly developed advanced materials and well known engineering materials are combined despite of fully developed reliability concepts for such devices and components. In addition the increasing interface-to volume ratio in highly integrated systems and nanoparticle filled materials are challenges for experimental reliability evaluation. New strategies for reliability assessment on the submicron scale are essential to fulfil the needs of future devices. In this paper a nanoscale resolution experimental method for the measurement of thermo-mechanical deformation at material interfaces is introduced. The determination of displacement fields is based on scanning probe microscopy (SPM) data. In-situ SPM scans of the analyzed object (i.e. material interface) are carried out at different thermo-mechanical load states. The obtained images are compared by grayscale cross correlation algorithms. This allows the tracking of local image patterns of the analyzed surface structure. The measurement results are full-field displacement fields with nanometer resolution. With the obtained data the mixed mode type of loading at material interfaces can be analyzed with highest resolution for future needs in micro system and nanotechnology.

Characterization of the Microstructures of Various Materials.

DTIC Science & Technology

1984-04-01

has been reviewed and is approved for publication. CHARLES R. UNDERWOOD Manager, Characterization Facility Structural Metals Branch Metals & Ceramics ...Division FOR THE COMMANDER GAIL E. EICHELMAN Chief, Structural Metals Branch Metals & Ceramics Division "If your address has changed, if you wish to...Electroplating Set-up, (b) P&W RSR185 Ni-Ni Plate , (c) Powder Distribution in 3-mill Disk. 12 2 Schematic Representation of Voltage-Current Characteristics for

Publications - PDF 95-33D | Alaska Division of Geological & Geophysical

Science.gov Websites

D-1, C-1, and part of the B-1 quadrangles, east-central Alaska Authors: Pinney, D.S., Clough, J.G ., Reifenstuhl, R.R., and Liss, S.A., 1995, Derivative geologic materials map of the Charley River D-1, C-1, and part of the B-1 quadrangles, east-central Alaska: Alaska Division of Geological & Geophysical

The National Shipbuilding Research Program: Producibility Cost Reductions through Alternative Materials and Processes

DTIC Science & Technology

1999-03-01

steel; -60F - 250 F; nonflammable acrylic mod- ified methyl - methacrylate Hernon MI React 761; Act 63 two component unprimed steel/primed/ painted trowel... MSD ) of the University of Michigan Transportation Institute (UMTRI), the Shipyards Division of Avondale Industries, and Damilic Corporation, to...classification society requirements. This research was conducted by the research team of the Marine Systems Division ( MSD ) of the University of Michigan

Chemical Technology Division, Annual technical report, 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-03-01

Highlights of the Chemical Technology (CMT) Division`s activities during 1991 are presented. In this period, CMT conducted research and development in the following areas: (1) electrochemical technology, including advanced batteries and fuel cells; (2) technology for fluidized-bed combustion and coal-fired magnetohydrodynamics; (3) methods for treatment of hazardous and mixed hazardous/radioactive waste; (4) the reaction of nuclear waste glass and spent fuel under conditions expected for an unsaturated repository; (5) processes for separating and recovering transuranic elements from nuclear waste streams; (6) recovery processes for discharged fuel and the uranium blanket in the Integral Fast Reactor (IFR); (7) processes for removalmore » of actinides in spent fuel from commercial water-cooled nuclear reactors and burnup in IFRs; and (8) physical chemistry of selected materials in environments simulating those of fission and fusion energy systems. The Division also conducts basic research in catalytic chemistry associated with molecular energy resources; chemistry of superconducting oxides and other materials of interest with technological application; interfacial processes of importance to corrosion science, catalysis, and high-temperature superconductivity; and the geochemical processes involved in water-rock interactions occurring in active hydrothermal systems. In addition, the Analytical Chemistry Laboratory in CMT provides a broad range of analytical chemistry support services to the technical programs at Argonne National Laboratory (ANL).« less

Belousov Zhabotinsky Autonomic Hydrogel Composites: Regulating Waves via Asymmetry (Postprint)

DTIC Science & Technology

2016-09-23

distribution unlimited. © 2016 AMERICAN ASSOCIATION FOR THE ADVANCEMENT OF SCIENCE (STINFO COPY) AIR FORCE RESEARCH LABORATORY MATERIALS AND...MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSORING/MONITORING AGENCY ACRONYM(S) Air Force Research Laboratory Materials and Manufacturing...EARCH ART I C L EPHYS I CAL SC I ENCEFunctional Materials Division, Materials and Manufacturing Directorate, Air Force Re- search Laboratory, 2179 12th

First NASA Workshop on Wiring for Space Applications

NASA Technical Reports Server (NTRS)

Hammond, Ahmad (Compiler); Stavnes, Mark W. (Compiler)

1994-01-01

This document contains the proceedings of the First NASA Workshop on Wiring for Space Applications held at NASA Lewis Research Center in Cleveland, OH, July 23-24, 1991. The workshop was sponsored by NASA Headquarters Code QE Office of Safety and Mission Quality, Technical Standards Division and hosted by the NASA Lewis Research Center, Power Technology Division, Electrical Components and Systems Branch. The workshop addressed key technology issues in the field of electrical power wiring for space applications. Speakers from government, industry and academia presented and discussed topics on arc tracking phenomena, wiring applications and requirements, and new candidate insulation materials and constructions. Presentation materials provided by the various speakers are included in this document.

Scientific and Technical Information Output of the Langley Research Center, for calendar year 1976

NASA Technical Reports Server (NTRS)

1976-01-01

Documents listed include NASA Technical Reports, Technical Notes, Technical Memorandums, Special Publications, Contractor Reports, journal articles, and technical presentations made at Society meetings. NASA formal reports listed are those that were mailed and distributed to the ultimate user. The material presented here is listed first by Division and then under the following headings: (a) Formal Reports, (b) Contractor Reports, (c) Articles and Meeting Presentations, and (d) High Number Technical Memorandums (High TMX's). Under each heading, the material cited authors in alphabetical order. If a report has more than one author and these authors are from different Divisions, the report is listed only once, under the senior author's name.

FWP executive summaries: basic energy sciences materials sciences and engineering program (SNL/NM).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Samara, George A.; Simmons, Jerry A.

2006-07-01

This report presents an Executive Summary of the various elements of the Materials Sciences and Engineering Program which is funded by the Division of Materials Sciences and Engineering, Office of Basic Energy Sciences, U.S. Department of Energy at Sandia National Laboratories, New Mexico. A general programmatic overview is also presented.

Research of Flammability of Fireproof Materials in Ship Safety

NASA Astrophysics Data System (ADS)

Jiang, Yizhou; Han, Duanfeng; Zhang, Ziwei

2017-09-01

This paper analyzes the classification, performance and application of ship fireproof and heat insulating materials, and describes the test standard and performance evaluation criteria of the non-combustibility, low flame-spread characteristics and smoke and toxicity of marine fireproof materials in detail. So the paper has certain reference value and guidance significance for the selection of heat insulating materials with fire divisions and the use of flammable materials on board in accordance with requirements.

78 FR 43263 - Paperless Hazard Communications Pilot Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-19

... Research Division (PHH-23), Pipeline and Hazardous Materials Safety Administration, 1200 New Jersey Avenue... materials by air, highway, rail, and water) to test the feasibility and then evaluate both the feasibility... times and locations.'' On September 12, 2001, the Research and Special Programs Administration (the...

Oleanna Math Program Materials.

ERIC Educational Resources Information Center

Coole, Walter A.

This document is a collection of course outlines, syllabi, and test materials designed for several high school level and lower division mathematics courses taught in an auto-tutorial learning laboratory at Skagit Valley College (Washington). The courses included are: Pre-Algebra, Basic Algebra, Plan Geometry, Intermediate Algebra, Probability and…

The Korean War: An ERIC/ChESS Sample.

ERIC Educational Resources Information Center

Pinhey, Laura A.

2000-01-01

Provides a list of teaching materials and general background documents about the Korean War from the ERIC database. Offers directions for obtaining the full text of materials about the division of South and North Korea, the geography of Korea, and South Korea's economic development. (CMK)

Princeton Plasma Physics Laboratory: Annual report, October 1, 1986--September 30, 1987

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1987-01-01

This report contains papers on the following topics: Principle Parameters Achieved in Experimental Devices (FY87); Tokamak Fusion Test Reactor; Princeton Beta Experiment-Modification; S-1 Spheromak; Current-Drive Experiment; X-Ray Laser Studies; Theoretical Division; Tokamak Modeling; Compact Ignition Tokamak; Engineering Department; Project Planning and Safety Office; Quality Assurance and Reliability; Administrative Operations; and PPPL Patent Invention Disclosures (FY87).

Reliability of Powertrain Components Exposed to Extreme Tribological Environments

DTIC Science & Technology

2010-08-17

Tribological Environments, Fenske et al. UNCLASSIFIED: Dist A. Approved for public release 2010 NDIA GROUND VEHICLE SYSTEMS ENGINEERING AND...TRIBOLOGICAL ENVIRONMENTS G. R. Fenske , O. O. Ajayi, R. A. Erck, C. Lorenzo-Martin, and Ashley Masoner Energy Systems Division Argonne National...Tribological Environments, Fenske et al. UNCLASSIFIED: Dist A. Approved for public release presented below summarize a series of tests that was performed

Engineering, technical, and management support services

NASA Technical Reports Server (NTRS)

1994-01-01

This report summarizes by task the engineering, technical, and management support services provided by Vitro Corporation to NASA Headquarters Office of Safety, Reliability, Maintainability, and Quality Assurance (now called Office of Safety and Mission Assurance (OSMA)) (Code Q) under Contract Number NASW-4311 from the period February 10, 1994. Each task summary includes significant Vitro accomplishments, conclusions, and recommendations for future efforts in each of the divisions within OSMA.

Educational transformation in upper-division physics: The Science Education Initiative model, outcomes, and lessons learned

NASA Astrophysics Data System (ADS)

Chasteen, Stephanie V.; Wilcox, Bethany; Caballero, Marcos D.; Perkins, Katherine K.; Pollock, Steven J.; Wieman, Carl E.

2015-12-01

[This paper is part of the Focused Collection on Upper Division Physics Courses.] In response to the need for a scalable, institutionally supported model of educational change, the Science Education Initiative (SEI) was created as an experiment in transforming course materials and faculty practices at two institutions—University of Colorado Boulder (CU) and University of British Columbia. We find that this departmentally focused model of change, which includes an explicit focus on course transformation as supported by a discipline-based postdoctoral education specialist, was generally effective in impacting courses and faculty across the institution. In CU's Department of Physics, the SEI effort focused primarily on upper-division courses, creating high-quality course materials, approaches, and assessments, and demonstrating an impact on student learning. We argue that the SEI implementation in the CU Physics Department, as compared to that in other departments, achieved more extensive impacts on specific course materials, and high-quality assessments, due to guidance by the physics education research group—but with more limited impact on the departmental faculty as a whole. We review the process and progress of the SEI Physics at CU and reflect on lessons learned in the CU Physics Department in particular. These results are useful in considering both institutional and faculty-led models of change and course transformation.

Impact Properties of Metal Fan Containment Materials Being Evaluated for the High-Speed Civil Transport (HSCT)

NASA Technical Reports Server (NTRS)

1996-01-01

Under the Enabling Propulsion Materials (EPM) program - a partnership between NASA, Pratt & Whitney, and GE Aircraft Engines - the Materials and Structures Divisions of the NASA Lewis Research Center are involved in developing a fan-containment system for the High-Speed Civil Transport (HSCT). The program calls for a baseline system to be designed by the end of 1995, with subsequent testing of innovative concepts. Five metal candidate materials are currently being evaluated for the baseline system in the Structures Division's Ballistic Impact Facility. This facility was developed to provide the EPM program with cost-efficient and timely impact test data. At the facility, material specimens are impacted at speeds up to 350 m/sec by projectiles of various sizes and shapes to assess the specimens' ability to absorb energy and withstand impact. The tests can be conducted at either room or elevated temperatures. Posttest metallographic analysis is conducted to improve understanding of the failure modes. A dynamic finite element program is used to simulate the events and both guide the testing as well as aid in designing the fan-containment system.

Optimization of Adaptive Intraply Hybrid Fiber Composites with Reliability Considerations

NASA Technical Reports Server (NTRS)

Shiao, Michael C.; Chamis, Christos C.

1994-01-01

The reliability with bounded distribution parameters (mean, standard deviation) was maximized and the reliability-based cost was minimized for adaptive intra-ply hybrid fiber composites by using a probabilistic method. The probabilistic method accounts for all naturally occurring uncertainties including those in constituent material properties, fabrication variables, structure geometry, and control-related parameters. Probabilistic sensitivity factors were computed and used in the optimization procedures. For actuated change in the angle of attack of an airfoil-like composite shell structure with an adaptive torque plate, the reliability was maximized to 0.9999 probability, with constraints on the mean and standard deviation of the actuation material volume ratio (percentage of actuation composite material in a ply) and the actuation strain coefficient. The reliability-based cost was minimized for an airfoil-like composite shell structure with an adaptive skin and a mean actuation material volume ratio as the design parameter. At a O.9-mean actuation material volume ratio, the minimum cost was obtained.

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The Coal and Electric Data and Renewables Division; Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), Department of Energy prepares the EPM. This publication provides monthly statistics at the State, Census division, and U.S. levels for net generation, fossil fuel consumption and stocks, quantity and quality of fossil fuels, cost of fossil fuels, electricity retail sales, associated revenue, and average revenue per kilowatthour of electricity sold. In addition, data on net generation, fuel consumption, fuel stocks, quantity and cost of fossil fuels are also displayed for the North American Electric Reliability Council (NERC) regions. The EIAmore » publishes statistics in the EPM on net generation by energy source; consumption, stocks, quantity, quality, and cost of fossil fuels; and capability of new generating units by company and plant.« less

Twelve Scientific Specialists of the Peenemuende Team

NASA Technical Reports Server (NTRS)

2004-01-01

Twelve scientific specialists of the Peenemuende team at the front of Building 4488, Redstone Arsenal, Huntsville, Alabama. They led the Army's space efforts at ABMA before transfer of the team to National Aeronautic and Space Administration (NASA), George C. Marshall Space Flight Center (MSFC). (Left to right) Dr. Ernst Stuhlinger, Director, Research Projects Office; Dr. Helmut Hoelzer, Director, Computation Laboratory: Karl L. Heimburg, Director, Test Laboratory; Dr. Ernst Geissler, Director, Aeroballistics Laboratory; Erich W. Neubert, Director, Systems Analysis Reliability Laboratory; Dr. Walter Haeussermarn, Director, Guidance and Control Laboratory; Dr. Wernher von Braun, Director Development Operations Division; William A. Mrazek, Director, Structures and Mechanics Laboratory; Hans Hueter, Director, System Support Equipment Laboratory;Eberhard Rees, Deputy Director, Development Operations Division; Dr. Kurt Debus, Director Missile Firing Laboratory; Hans H. Maus, Director, Fabrication and Assembly Engineering Laboratory

Origin of Marshall Space Flight Center (MSFC)

NASA Image and Video Library

2004-04-15

Twelve scientific specialists of the Peenemuende team at the front of Building 4488, Redstone Arsenal, Huntsville, Alabama. They led the Army's space efforts at ABMA before transfer of the team to National Aeronautic and Space Administration (NASA), George C. Marshall Space Flight Center (MSFC). (Left to right) Dr. Ernst Stuhlinger, Director, Research Projects Office; Dr. Helmut Hoelzer, Director, Computation Laboratory: Karl L. Heimburg, Director, Test Laboratory; Dr. Ernst Geissler, Director, Aeroballistics Laboratory; Erich W. Neubert, Director, Systems Analysis Reliability Laboratory; Dr. Walter Haeussermarn, Director, Guidance and Control Laboratory; Dr. Wernher von Braun, Director Development Operations Division; William A. Mrazek, Director, Structures and Mechanics Laboratory; Hans Hueter, Director, System Support Equipment Laboratory;Eberhard Rees, Deputy Director, Development Operations Division; Dr. Kurt Debus, Director Missile Firing Laboratory; Hans H. Maus, Director, Fabrication and Assembly Engineering Laboratory

Annual ADP planning document

NASA Technical Reports Server (NTRS)

Mogilevsky, M.

1973-01-01

The Category A computer systems at KSC (Al and A2) which perform scientific and business/administrative operations are described. This data division is responsible for scientific requirements supporting Saturn, Atlas/Centaur, Titan/Centaur, Titan III, and Delta vehicles, and includes realtime functions, Apollo-Soyuz Test Project (ASTP), and the Space Shuttle. The work is performed chiefly on the GEL-635 (Al) system located in the Central Instrumentation Facility (CIF). The Al system can perform computations and process data in three modes: (1) real-time critical mode; (2) real-time batch mode; and (3) batch mode. The Division's IBM-360/50 (A2) system, also at the CIF, performs business/administrative data processing such as personnel, procurement, reliability, financial management and payroll, real-time inventory management, GSE accounting, preventive maintenance, and integrated launch vehicle modification status.

(1) The Relationship of Protein Expression and Cell Division, (2) 3D Imaging of Cells Using Digital Holography, and (3) General Chemistry Enrollment at University of Michigan

ERIC Educational Resources Information Center

Matz, Rebecca L.

2012-01-01

Chapter 1: The role of cell division in protein expression is important to understand in order to guide the development of better nonviral gene delivery materials that can transport DNA to the nucleus with high efficiency for a variety of cell types, particularly when nondividing cells are targets of gene therapy. We evaluated the relationship…

Experimental and Computational Studies of Molecular and Lattice Symmetries of Energetic Materials at High Pressure

DTIC Science & Technology

2002-01-01

Prescribed by ANSI Std Z39-18 Research and Technology Department Dynamics and Diagnostics Division, Static High- Pressure Group Overall Research...Department Dynamics and Diagnostics Division, Static High- Pressure Group Impact of this Basic Research • This research generates phase and density...Static High- Pressure Group Experimental Methodology Use Diamond Anvil Cells (DAC) with coil Heaters (HDAC) to achieve • High pressures (P) to 10 GPa

Fighting Divisions

DTIC Science & Technology

1945-12-01

secure several passes in the Vosges Mountains. It hadn’t been committed to battle long before it learned a severe lesson in what war can be like at its...for the first time enough material on every one of our divisions to give the average citizen a brief idea of where each has been and what each has...considered both the advisability and desirability of immediately releasing accounts of impressive battle achievements to Ameri- can citizens at home so

An Overview: NASA LeRC Structures Programs

NASA Technical Reports Server (NTRS)

Zaretsky, Erwin V.

1998-01-01

A workshop on National Structures Programs was held, jointly sponsored by the AIAA Structures Technical Committee, the University of Virginia's Center for Advanced Computational Technology and NASA. The Objectives of the Workshop were to: provide a forum for discussion of current Government-sponsored programs in the structures area; identify high potential research areas for future aerospace systems; and initiate suitable interaction mechanisms with the managers of structures programs. The presentations covered structures programs at NASA, DOD (AFOSR, ONR, ARO and DARPA), and DOE. This publication is the presentation of the Structures and Acoustics Division of the NASA Lewis Research Center. The Structures and Acoustics Division has its genesis dating back to 1943. It is responsible for NASA research related to rotating structures and structural hot sections of both airbreathing and rocket engines. The work of the division encompasses but is not limited to aeroelasticity, structural life prediction and reliability, fatigue and fracture, mechanical components such as bearings, gears, and seals, and aeroacoustics. These programs are discussed and the names of responsible individuals are provided for future reference.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeff Neaton

Jan. 22, 2010: Host Alice Egan of Berkeley Lab's Materials Sciences Division interviews scientists about their lives and work in language everyone can understand. Her guest Berkeley Lab's MIke Crommie.

Functional redundancy of division specific penicillin-binding proteins in Bacillus subtilis.

PubMed

Sassine, Jad; Xu, Meizhu; Sidiq, Karzan R; Emmins, Robyn; Errington, Jeff; Daniel, Richard A

2017-10-01

Bacterial cell division involves the dynamic assembly of a diverse set of proteins that coordinate the invagination of the cell membrane and synthesis of cell wall material to create the new cell poles of the separated daughter cells. Penicillin-binding protein PBP 2B is a key cell division protein in Bacillus subtilis proposed to have a specific catalytic role in septal wall synthesis. Unexpectedly, we find that a catalytically inactive mutant of PBP 2B supports cell division, but in this background the normally dispensable PBP 3 becomes essential. Phenotypic analysis of pbpC mutants (encoding PBP 3) shows that PBP 2B has a crucial structural role in assembly of the division complex, independent of catalysis, and that its biochemical activity in septum formation can be provided by PBP 3. Bioinformatic analysis revealed a close sequence relationship between PBP 3 and Staphylococcus aureus PBP 2A, which is responsible for methicillin resistance. These findings suggest that mechanisms for rescuing cell division when the biochemical activity of PBP 2B is perturbed evolved prior to the clinical use of β-lactams. © 2017 The Authors. Molecular Microbiology published by John Wiley & Sons Ltd.

Skin Cancer Education Materials: Selected Annotations.

ERIC Educational Resources Information Center

National Cancer Inst. (NIH), Bethesda, MD.

This annotated bibliography presents 85 entries on a variety of approaches to cancer education. The entries are grouped under three broad headings, two of which contain smaller sub-divisions. The first heading, Public Education, contains prevention and general information, and non-print materials. The second heading, Professional Education,…

33 CFR 209.340 - Laboratory investigations and materials testing.

Code of Federal Regulations, 2010 CFR

2010-07-01

... hydraulic laboratories, and to the Inter-Agency Sedimentation Project. (c) References. (1) AR 37-20. (2) AR... ordinary business channels. (3) Performance of the work will not interfere with provisions of services... with the same procedures as apply to Division Materials Laboratories. (3) Inter-Agency Sedimentation...

33 CFR 209.340 - Laboratory investigations and materials testing.

Code of Federal Regulations, 2011 CFR

2011-07-01

... hydraulic laboratories, and to the Inter-Agency Sedimentation Project. (c) References. (1) AR 37-20. (2) AR... ordinary business channels. (3) Performance of the work will not interfere with provisions of services... with the same procedures as apply to Division Materials Laboratories. (3) Inter-Agency Sedimentation...

Software Development Processes Applied to Computational Icing Simulation

NASA Technical Reports Server (NTRS)

Levinson, Laurie H.; Potapezuk, Mark G.; Mellor, Pamela A.

1999-01-01

The development of computational icing simulation methods is making the transition form the research to common place use in design and certification efforts. As such, standards of code management, design validation, and documentation must be adjusted to accommodate the increased expectations of the user community with respect to accuracy, reliability, capability, and usability. This paper discusses these concepts with regard to current and future icing simulation code development efforts as implemented by the Icing Branch of the NASA Lewis Research Center in collaboration with the NASA Lewis Engineering Design and Analysis Division. With the application of the techniques outlined in this paper, the LEWICE ice accretion code has become a more stable and reliable software product.

Advanced Code-Division Multiplexers for Superconducting Detector Arrays

NASA Astrophysics Data System (ADS)

Irwin, K. D.; Cho, H. M.; Doriese, W. B.; Fowler, J. W.; Hilton, G. C.; Niemack, M. D.; Reintsema, C. D.; Schmidt, D. R.; Ullom, J. N.; Vale, L. R.

2012-06-01

Multiplexers based on the modulation of superconducting quantum interference devices are now regularly used in multi-kilopixel arrays of superconducting detectors for astrophysics, cosmology, and materials analysis. Over the next decade, much larger arrays will be needed. These larger arrays require new modulation techniques and compact multiplexer elements that fit within each pixel. We present a new in-focal-plane code-division multiplexer that provides multiplexing elements with the required scalability. This code-division multiplexer uses compact lithographic modulation elements that simultaneously multiplex both signal outputs and superconducting transition-edge sensor (TES) detector bias voltages. It eliminates the shunt resistor used to voltage bias TES detectors, greatly reduces power dissipation, allows different dc bias voltages for each TES, and makes all elements sufficiently compact to fit inside the detector pixel area. These in-focal plane code-division multiplexers can be combined with multi-GHz readout based on superconducting microresonators to scale to even larger arrays.

A brief overview of computational structures technology related activities at NASA Lewis Research Center

NASA Technical Reports Server (NTRS)

Hopkins, Dale A.

1992-01-01

The presentation gives a partial overview of research and development underway in the Structures Division of LeRC, which collectively is referred to as the Computational Structures Technology Program. The activities in the program are diverse and encompass four major categories: (1) composite materials and structures; (2) probabilistic analysis and reliability; (3) design optimization and expert systems; and (4) computational methods and simulation. The approach of the program is comprehensive and entails exploration of fundamental theories of structural mechanics to accurately represent the complex physics governing engine structural performance, formulation, and implementation of computational techniques and integrated simulation strategies to provide accurate and efficient solutions of the governing theoretical models by exploiting the emerging advances in computer technology, and validation and verification through numerical and experimental tests to establish confidence and define the qualities and limitations of the resulting theoretical models and computational solutions. The program comprises both in-house and sponsored research activities. The remainder of the presentation provides a sample of activities to illustrate the breadth and depth of the program and to demonstrate the accomplishments and benefits that have resulted.

Berkeley Lab - Materials Sciences Division

Science.gov Websites

; Finance Templates Travel One-Stop Acknowledging MSD Support Human Resources Facilities & Space Planning Procurement and Property Proposals & Finance Templates Travel Facilities & Space Planning

49 CFR 173.4a - Excepted quantities.

Code of Federal Regulations, 2012 CFR

2012-10-01

... ice), and lithium batteries and cells. (c) Inner packaging limits. The maximum quantity of hazardous materials in each inner packaging is limited to: (1) For toxic material with a Division 6.1 primary or... excepted quantities must meet the following: (1) Each inner receptacle must be constructed of plastic, or...

75 FR 2163 - Constellation Energy; Notice of Docketing of Special Nuclear Material License SNM-2505 Amendment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-14

... NUCLEAR REGULATORY COMMISSION [Docket No. 72-8; NRC-2010-0011] Constellation Energy; Notice of... Independent Spent Fuel Storage Installation AGENCY: Nuclear Regulatory Commission. ACTION: Notice of license..., Division of Spent Fuel Storage and Transportation, Office of Nuclear Material Safety and Safeguards, U.S...

Evaluation of National Geographic School Publishing Nonfiction Literacy Materials. Summary Report.

ERIC Educational Resources Information Center

Metcalf, Kim K.; Smith, Carl B.; Legan, Natalie A.

During the 2001-02 academic year, a purposive, national evaluation was undertaken of "Windows on Literacy" and "Reading Expeditions," two new school-based programs produced by the School Publishing Division of the National Geographic Society (NGS). The evaluation sought to determine the efficacy of the new materials for…

Engineered nano materials and the U.S. Environmental Protection Agency: Research at the Western Ecology Division in Oregon, USA

EPA Science Inventory

Engineered nanoparticles represent a unique hazard to human health and the environment because their inherent characteristics differ significantly from commonly used chemicals and bulk forms of materials. The U.S. Environmental Protection Agency (EPA) is responsible for protecti...

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Ramamoorthy Ramesh The Metals Society Bardeen Prize in Electronic Materials Rob Ritchie Elected as a Foreign into the earth Rob Ritchie Elected Foreign Member of the Royal Swedish Academy of Engineering Sciences PECASE (Presidential Early Career Award for Scientists and Engineers) Eli Yablonovitch Elected as Foreign

78 FR 3429 - Proposed Data Collections Submitted for Public Comment and Recommendations

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-16

... Disease Educational Messages and Materials for the Division of Blood Disorders (0920-0915, Expiration 01... sickle cell disease. To develop valuable messages and materials, CDC will conduct formative focus groups... remote, rural areas. Based on the findings from the formative focus groups, CDC will develop and test...

78 FR 27391 - Agency Forms Undergoing Paperwork Reduction Act Review

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-10

... Materials for the Division of Blood Disorders (0920-0915, Expired 01/31/2013)--Reinstatement--National... messages and materials, CDC will conduct formative focus groups with people with SCD across the country... the formative focus groups, CDC will develop and test draft messages. A total of 10 focus groups will...

Chicanos: A Checklist of Current Materials, No. 2, July-December 1985.

ERIC Educational Resources Information Center

Guerena, Salvador, Comp.; Gonzalez, Raquel Quiroz, Comp.

This bibliography of 148 new titles in the Coleccion Tloque Nahuaque contains materials for and about Hispanic Americans, particularly Mexican Americans. The largest subject divisions are literature with 24 titles, bilingual education with 18, and history with 15. Other subject areas include agricultural labor, anthropology, art, bibliographies,…

Perceived facial changes of Class II Division 1 patients with convex profiles after functional orthopedic treatment followed by fixed orthodontic appliances.

PubMed

Tsiouli, Kleopatra; Topouzelis, Nikolaos; Papadopoulos, Moschos A; Gkantidis, Nikolaos

2017-07-01

The aim of this research was to investigate the perceived facial changes in Class II Division 1 patients with convex profiles after functional orthopedic treatment followed by fixed orthodontic appliances. Pretreatment and posttreatment profile photographs of 12 Class II Division 1 patients treated with activators, 12 Class II Division 1 patients treated with Twin-block appliances, and 12 controls with normal profiles treated without functional appliances were presented in pairs to 10 orthodontists, 10 patients, 10 parents, and 10 laypersons. The raters assessed changes in facial appearance on a visual analog scale. Two-way multivariate analysis of variance was used to evaluate differences among group ratings. Intrarater reliability was strong in most cases (intraclass correlation coefficients, >0.7). The internal consistency of the assessments was high (alpha, >0.87), both within and between groups. The raters consistently perceived more positive changes in the Class II Division 1 groups compared with the control group. However, this difference hardly exceeded 1/10th of the total visual analog scale length in its highest value and was mostly evident in the lower face and chin. No significant differences were found between the activator and the Twin-block groups. Although the raters perceived improvements of the facial profiles after functional orthopedic treatment followed by fixed orthodontic appliances, these were quite limited. Thus, orthodontists should be tentative when predicting significant improvement of a patient's profile with this treatment option. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Installation Restoration Program. Phase 1. Records Search Wake Island Airfield

DTIC Science & Technology

1984-09-01

serviced transient Air Force aircraft at Wake Island. Detachments of the 6486th Air Base Wing (predecessor organization *of the 15th Air Base Wing...following groups: " o Base Operations o Transportation Division o Civil Engineering Division . Air Force facilities were located east of the 1700...since these materials were shipped to the base on barges. The contrac- tors also took waste oil from the Air . Force for use in their vehicles and

Principles and Application of Magnetic Rubber Testing for Crack Detection in High-Strength Steel Components: I. Active-Field Inspection

DTIC Science & Technology

2014-12-01

Historically, MRT found its most extensive application in the inspection of critical high-strength steel components of the F-111 aircraft to...Steve Burke is Group Leader Acoustic Material Systems within Maritime Division and Task Leader for AIR 07/101 Assessment and Control of Aircraft ...Maritime Division. He has previously led research programs in advanced electromagnetic and ultrasonic NDE for aircraft applications. Geoff has BSc and BE

Industrial Technology Modernization Program. Project 20. Consolidation and Automation of Material and Tool Storage. Phase 2

DTIC Science & Technology

1987-06-15

GENERAL DYNAMICS FORT WORTH DIVISION INDUSTRIAL TECHNOLOGY00 N MODERNIZATION PROGRAM Phase 2 Final Project Report DT C JUNO 7 1989J1K PROJECT 20...CLASSIFICATION O THIS PAGE All other editions are obsolete. unclassified Honeywell JUNE 15, 1987 GENERAL DYNAMICS FORT WORTH DIVISION INDUSTRIAL ...SYSTEMIEQUIPMENT/MACHINING SPECIFICATIONS 33 9 VENDOR/ INDUSTRY ANALYSIS FINDING 39 10 MIS REQUIREMENTS/IMPROVEMENTS 45 11 COST BENEFIT ANALYSIS 48 12 IMPLEMENTATION

Evaluation of the Military Functional Assessment Program: Inter rater Reliability of Task Scores

DTIC Science & Technology

2017-09-19

return-to-duty. Performance on the tasks is rated by a non-commissioned officer (NCO), occupational therapist, physical therapist, and mental health ...and additional ratings are provided on a subset of the tasks by an occupational therapist (OT), physical therapist (PT), and mental health (MH...3National Intrepid Center of Excellence United States Army Aeromedical Research Laboratory Aircrew Health and Performance Division September 2017

Analysis of the Reliable STING Early Warning System.

DTIC Science & Technology

1982-03-01

verr much appreciated. II .. . . . . . . . . . iV, , . . .l . . al I ll I III I I I III - 7 --7 ,,- ..11! I. INTRODUCTION A. BACKGROUND The U.S. Army is...information to a variety of elements ranging from the division staff to de ~loyed maneuver units, this study will focus on the air defense information...aircraft type . TABLE I Example Track Report ELEMENTS OF INFORMATION EXAMPLE IDENTIFICATION .................... HOSTILE TRACK DESIGNATOR

Overview of the SAE G-11 RMSL (Reliability, Maintainability, Supportability, and Logistics) Division Activities and Technical Projects

NASA Technical Reports Server (NTRS)

Singhal, Surendra N.

2003-01-01

The SAE G-11 RMSL (Reliability, Maintainability, Supportability, and Logistics) Division activities include identification and fulfillment of joint industry, government, and academia needs for development and implementation of RMSL technologies. Four Projects in the Probabilistic Methods area and two in the area of RMSL have been identified. These are: (1) Evaluation of Probabilistic Technology - progress has been made toward the selection of probabilistic application cases. Future effort will focus on assessment of multiple probabilistic softwares in solving selected engineering problems using probabilistic methods. Relevance to Industry & Government - Case studies of typical problems encountering uncertainties, results of solutions to these problems run by different codes, and recommendations on which code is applicable for what problems; (2) Probabilistic Input Preparation - progress has been made in identifying problem cases such as those with no data, little data and sufficient data. Future effort will focus on developing guidelines for preparing input for probabilistic analysis, especially with no or little data. Relevance to Industry & Government - Too often, we get bogged down thinking we need a lot of data before we can quantify uncertainties. Not True. There are ways to do credible probabilistic analysis with little data; (3) Probabilistic Reliability - probabilistic reliability literature search has been completed along with what differentiates it from statistical reliability. Work on computation of reliability based on quantification of uncertainties in primitive variables is in progress. Relevance to Industry & Government - Correct reliability computations both at the component and system level are needed so one can design an item based on its expected usage and life span; (4) Real World Applications of Probabilistic Methods (PM) - A draft of volume 1 comprising aerospace applications has been released. Volume 2, a compilation of real world applications of probabilistic methods with essential information demonstrating application type and timehost savings by the use of probabilistic methods for generic applications is in progress. Relevance to Industry & Government - Too often, we say, 'The Proof is in the Pudding'. With help from many contributors, we hope to produce such a document. Problem is - not too many people are coming forward due to proprietary nature. So, we are asking to document only minimum information including problem description, what method used, did it result in any savings, and how much?; (5) Software Reliability - software reliability concept, program, implementation, guidelines, and standards are being documented. Relevance to Industry & Government - software reliability is a complex issue that must be understood & addressed in all facets of business in industry, government, and other institutions. We address issues, concepts, ways to implement solutions, and guidelines for maximizing software reliability; (6) Maintainability Standards - maintainability/serviceability industry standard/guidelines and industry best practices and methodologies used in performing maintainability/ serviceability tasks are being documented. Relevance to Industry & Government - Any industry or government process, project, and/or tool must be maintained and serviced to realize the life and performance it was designed for. We address issues and develop guidelines for optimum performance & life.

The Effect of Alloy Composition and Processing on the Structure and Properties of I/M Al-Li-X Alloys

DTIC Science & Technology

1990-07-01

ORGANIZATION Department ot Materials Scienci (N aplicable) University of Virginia U. S. Army Research Office 6c. ADDRESS (City, State, and ZIP Code) 7b...27709 Attention: Dr. Andrew Crowson, Program Officer Materials Science Division Submitted by: E. A. Starke Earnest Oglesby Professor of Materials ...Science and Dean G. J. Shiflet Professor of Materials Science Report No. UVA/525140/MS91/101 July 1990 DTIC ELECTFE SAUG3 1190 I DEPARTMENT OF MATERIALS

Solid Insulated Switchgear and Investigation of its Mechanical and Electrical Reliability

NASA Astrophysics Data System (ADS)

Sato, Junichi; Kinoshita, Susumu; Sakaguchi, Osamu; Miyagawa, Masaru; Shimizu, Toshio; Homma, Mitsutaka

SF6 gas is applied widely to medium voltage switchgear because of its high insulation reliability and down-sizing ability. However, SF6 gas was placed on the list of greenhouse gases under the Kyoto Protocol in 1997. Since then, the investigation and development concerning SF6-free or less has carried out activity. Therefore, we paid attention to the solid material which has higher dielectric strength than SF6, and we have newly developed solid insulated switchgear (SIS) achieved by molding all main circuit. A new epoxy casting material is applied, which contains a great deal of spherical silica and a small amount of rubber particles. This new material has the high mechanical strength, high thermal resistance, high toughness, and also high dielectric strength because of directly molding the vacuum bottle, down-sizing and reliability. This paper describes about the technology of a new epoxy casting material which achieves the SIS. In addition, the mechanical and electrical reliability test of SIS applied a new epoxy resin are carried out, and effectiveness of the development material and the mechanical and electrical reliability of SIS are verified.

Computing Reliabilities Of Ceramic Components Subject To Fracture

NASA Technical Reports Server (NTRS)

Nemeth, N. N.; Gyekenyesi, J. P.; Manderscheid, J. M.

1992-01-01

CARES calculates fast-fracture reliability or failure probability of macroscopically isotropic ceramic components. Program uses results from commercial structural-analysis program (MSC/NASTRAN or ANSYS) to evaluate reliability of component in presence of inherent surface- and/or volume-type flaws. Computes measure of reliability by use of finite-element mathematical model applicable to multiple materials in sense model made function of statistical characterizations of many ceramic materials. Reliability analysis uses element stress, temperature, area, and volume outputs, obtained from two-dimensional shell and three-dimensional solid isoparametric or axisymmetric finite elements. Written in FORTRAN 77.

12 CFR 1102.30 - Rules of evidence.

Code of Federal Regulations, 2010 CFR

2010-01-01

... in this section, relevant, material and reliable evidence that is not unduly repetitive is admissible... relevant, material, reliable and not unduly repetitive. (b) Stipulations. Any party may stipulate in...

12 CFR 1102.30 - Rules of evidence.

Code of Federal Regulations, 2011 CFR

2011-01-01

... in this section, relevant, material and reliable evidence that is not unduly repetitive is admissible... relevant, material, reliable and not unduly repetitive. (b) Stipulations. Any party may stipulate in...

75 FR 70031 - Antitrust Division

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-16

...) operate a branding program based upon distinctive trademarks to create high customer awareness of, demand... or subcontract a branding program; (vii) create printed and/or electronic materials for distribution...

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Postdoc Forum Research Highlights Awards Publications Database Events Calendar Newsletter Archive People Database Events Calendar Newsletter Archive Send us your research highlights. Reserch Highlight Template

Assessing learning outcomes in middle-division classical mechanics: The Colorado Classical Mechanics and Math Methods Instrument

NASA Astrophysics Data System (ADS)

Caballero, Marcos D.; Doughty, Leanne; Turnbull, Anna M.; Pepper, Rachel E.; Pollock, Steven J.

2017-06-01

Reliable and validated assessments of introductory physics have been instrumental in driving curricular and pedagogical reforms that lead to improved student learning. As part of an effort to systematically improve our sophomore-level classical mechanics and math methods course (CM 1) at CU Boulder, we have developed a tool to assess student learning of CM 1 concepts in the upper division. The Colorado Classical Mechanics and Math Methods Instrument (CCMI) builds on faculty consensus learning goals and systematic observations of student difficulties. The result is a 9-question open-ended post test that probes student learning in the first half of a two-semester classical mechanics and math methods sequence. In this paper, we describe the design and development of this instrument, its validation, and measurements made in classes at CU Boulder and elsewhere.

Division of Energy Biosciences annual report and summaries of FY 1996 activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-04-01

The mission of the Division of Energy Biosciences is to support research that advances the fundamental knowledge necessary for the future development of biotechnologies related to the Department of Energy`s mission. The departmental civilian objectives include effective and efficient energy production, energy conservation, environmental restoration, and waste management. The Energy Biosciences program emphasizes research in the microbiological and plant sciences, as these understudied areas offer numerous scientific opportunities to dramatically influence environmentally sensible energy production and conservation. The research supported is focused on the basic mechanism affecting plant productivity, conversion of biomass and other organic materials into fuels and chemicalsmore » by microbial systems, and the ability of biological systems to replace energy-intensive or pollutant-producing processes. The Division also addresses the increasing number of new opportunities arising at the interface of biology with other basic energy-related sciences such as biosynthesis of novel materials and the influence of soil organisms on geological processes. This report gives summaries on 225 projects on photosynthesis, membrane or ion transport, plant metabolism and biosynthesis, carbohydrate metabolism lipid metabolism, plant growth and development, plant genetic regulation and genetic mechanisms, plant cell wall development, lignin-polysaccharide breakdown, nitrogen fixation and plant-microbial symbiosis, mechanism for plant adaptation, fermentative microbial metabolism, one and two carbon microbial metabolism, extremophilic microbes, microbial respiration, nutrition and metal metabolism, and materials biosynthesis.« less

Effects of using multi-vide ruler kit in the acquisition of numeracy skills among PROTIM students

NASA Astrophysics Data System (ADS)

Arumugan, Hemalatha A./P.; Obeng, Sharifah Nasriah Wan; Talib, Corrienna Abdul; Bunyamin, Muhammad Abdul Hadi; Ali, Marlina; Ibrahim, Norhasniza; Zawadzki, Rainer

2017-08-01

One effective way to teach arithmetic more interestingly and make it easier to learn is through the use of instructional materials. These can help students master certain mathematical skills, particularly multiplication and division, often considered difficult amongst primary school pupils. Nevertheless, the insufficiency of appropriate instructional materials causes difficulty in understanding how to use the proper technique or apply the concept, especially in multiplication. With this in mind, this study investigated whether the innovative and creative instructional material designed to assist and enhance numeracy skills, namely the Multi-vide Ruler kit, could increase students' ability in solving multiplication and division questions and whether it affected their interest in solving numeracy problems. Participants in this study included ten PROTIM (Program Tiga M [Three M Program] - membaca [reading], menulis [writing] dan mengira [calculate]) students, 9-10 years old, who had difficulties in reading, writing and arithmetic. In order to get appropriate support for qualitative research, a pre and post-test containing ten basic mathematical operations, was implemented together with the Multi-vide Ruler Kit. The findings of the qualitative case study, with the pre and post-tests, showed significant differences in their achievement and interest in two-digit multiplication and division operations. The results suggest that this approach could improve PROTIM student's ability to solve basic mathematical operations. What was most encouraging was the increase in students' interest in solving numeracy problems.

An evaluation of pediatric dental patient education materials using contemporary health literacy measures.

PubMed

Kang, Edith; Fields, Henry W; Cornett, Sandy; Beck, F Michael

2005-01-01

The purpose of this study was to determine the appropriateness of nationally available dental information materials according to the suitability assessment of materials (SAM) method. Clinically related, professionally produced patient dental health education materials (N=22) provided by the American Academy of Pediatric Dentistry (AAPD) were evaluated using the SAM method that had previously been judged valid and reliable. A rater was trained by an experienced health literacy evaluator to establish validity. The rater then rated all materials for 5 categories of assessment (content, literacy demand, graphics, layout and typography, and learning stimulation/motivation) and an overall assessment, and repeated 5 materials to establish intrarater reliability. When compared to the experienced rater, the validity was K=0.43. The reliability was established for all ratings as K=0.52. The consistently weakest categories were content, graphics, and learning stimulation, while reading level as part of literacy demand was often not suitable. The overall suitability of the AAPD materials was generally classified as superior. Reliable and valid evaluation of available dental patient information materials can be accomplished. The materials were largely superior. There is great variability within the categories of evaluation. The categories of content, graphics, and learning stimulation require attention and could raise the overall quality of the materials.

In Conversation with Jeff Neaton

ScienceCinema

Jeff Neaton

2017-12-09

Jan. 22, 2010: Host Alice Egan of Berkeley Lab's Materials Sciences Division interviews scientists about their lives and work in language everyone can understand. Her guest Berkeley Lab's MIke Crommie.

Berkeley Lab - Materials Sciences Division

Science.gov Websites

MSD Support Human Resources Facilities & Space Planning Procurement and Property Proposals & Planning Procurement and Property Proposals & Finance Templates Travel Procurement and Property This

Berkeley Lab - Materials Sciences Division

Science.gov Websites

; Finance Templates Travel One-Stop Acknowledging MSD Support Human Resources Facilities & Space Planning Procurement and Property Proposals & Finance Templates Travel Travel This page has been moved

49 CFR 173.124 - Class 4, Divisions 4.1, 4.2 and 4.3-Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... exothermic decomposition even without participation of oxygen (air). A material is excluded from this... external ignition source, can ignite within five (5) minutes after coming in contact with air when tested... material that through a process where the gradual reaction of that substance with oxygen (in air) generates...

78 FR 41853 - Safety Advisory Guidance: Heating Rail Tank Cars To Prepare Hazardous Material for Unloading or...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-12

... rail tank car due to chemical self-reaction and expansion of the toluene diisocyanate matter wastes. On...: Cheryl West Freeman, Division of Engineering and Research, Pipeline and Hazardous Materials Safety... catastrophically ruptured at a transfer station at the BASF Corporation chemical facility in Freeport, Texas. The...

49 CFR 177.848 - Segregation of hazardous materials.

Code of Federal Regulations, 2010 CFR

2010-10-01

... materials 4.3 X X X X O X O Oxidizers 5.1 A X X X X O O X O Organic peroxides 5.2 X X X X O X O Poisonous...”, ammonium nitrate (UN 1942) and ammonium nitrate fertilizer may be loaded or stored with Division 1.1...

Berkeley Lab - Materials Sciences Division

Science.gov Websites

demonstrated a way to make it work. New Discovery Could Improve Organic Solar Cell Performance MSD's Center for lead to gains in efficiency for organic solar cells Rob Ritchie featured in Nature Communications Discover Material Ideal for Smart Photovoltaic Windows ▲ New Discovery Could Improve Organic Solar Cell

49 CFR 174.110 - Car magazine.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 2 2012-10-01 2012-10-01 false Car magazine. 174.110 Section 174.110...) Materials § 174.110 Car magazine. When specially authorized by the carrier, Division 1.1 or 1.2 (explosive) materials in quantity not exceeding 68 kg (150 pounds) may be carried in construction or repair cars if the...

49 CFR 174.110 - Car magazine.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 2 2013-10-01 2013-10-01 false Car magazine. 174.110 Section 174.110...) Materials § 174.110 Car magazine. When specially authorized by the carrier, Division 1.1 or 1.2 (explosive) materials in quantity not exceeding 68 kg (150 pounds) may be carried in construction or repair cars if the...

49 CFR 174.110 - Car magazine.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Car magazine. 174.110 Section 174.110...) Materials § 174.110 Car magazine. When specially authorized by the carrier, Division 1.1 or 1.2 (explosive) materials in quantity not exceeding 68 kg (150 pounds) may be carried in construction or repair cars if the...

49 CFR 174.110 - Car magazine.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false Car magazine. 174.110 Section 174.110...) Materials § 174.110 Car magazine. When specially authorized by the carrier, Division 1.1 or 1.2 (explosive) materials in quantity not exceeding 68 kg (150 pounds) may be carried in construction or repair cars if the...

49 CFR 174.110 - Car magazine.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 2 2014-10-01 2014-10-01 false Car magazine. 174.110 Section 174.110...) Materials § 174.110 Car magazine. When specially authorized by the carrier, Division 1.1 or 1.2 (explosive) materials in quantity not exceeding 68 kg (150 pounds) may be carried in construction or repair cars if the...

Cell Biology: Narrowing the Great Divide.

PubMed

Shaw, Sidney L

2017-02-20

Construction of the cell plate during plant cell division requires the precise insertion of materials around the circumferentially growing phragmoplast. New work shows that two kinesin-4 motor proteins act to shorten the domain of overlapping microtubules at the phragmoplast perimeter, limiting the site of material deposition. Copyright © 2017 Elsevier Ltd. All rights reserved.

49 CFR 173.124 - Class 4, Divisions 4.1, 4.2 and 4.3-Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... material that through a process where the gradual reaction of that substance with oxygen (in air) generates..., which are wetted with sufficient water, alcohol, or plasticizer to suppress explosive properties; and... exothermic decomposition even without participation of oxygen (air). A material is excluded from this...

36 CFR 701.2 - Acquisition of Library material by non-purchase means.

Code of Federal Regulations, 2010 CFR

2010-07-01

... policy of the Library of Congress to foster the enrichment of its collections through gifts of materials within the terms of the Library's acquisitions policies. In implementing this policy, division chiefs and... accompanied by a signed Agreement of Deposit. (2) It is the policy of the Library of Congress to accept...

Monograph - The Numerical Integration of Ordinary Differential Equations.

ERIC Educational Resources Information Center

Hull, T. E.

The materials presented in this monograph are intended to be included in a course on ordinary differential equations at the upper division level in a college mathematics program. These materials provide an introduction to the numerical integration of ordinary differential equations, and they can be used to supplement a regular text on this…

Chicanos: A Checklist of Current Materials. Nos. 1-2, January-December, 1987.

ERIC Educational Resources Information Center

Guerena, Salvador, Comp.; Gonzalez, Raquel Quiroz, Comp.

This bibliography of 369 new titles in the Coleccion Tloque Nahuaque contains materials for and about Hispanic Americans, particularly Mexican Americans. The largest subject divisions are literature with 70 titles, history with 61, economics with 44, and education with 27. Other subject areas include animal husbandry, anthropology, art, arts and…

49 CFR 174.204 - Tank car delivery of gases, including cryogenic liquids.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., including cryogenic liquids. (a) A tank car containing Class 2 (gases) material may not be unloaded unless... Division 2.1 (flammable gas) material that is a cryogenic liquid; or (ii) A tank car, except for a DOT-106A... ammonia; hydrogen chloride, refrigerated liquid; hydrocarbon gas, liquefied; or liquefied petroleum gas...

49 CFR 174.204 - Tank car delivery of gases, including cryogenic liquids.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., including cryogenic liquids. (a) A tank car containing Class 2 (gases) material may not be unloaded unless... Division 2.1 (flammable gas) material that is a cryogenic liquid; or (ii) A tank car, except for a DOT-106A... ammonia; hydrogen chloride, refrigerated liquid; hydrocarbon gas, liquefied; or liquefied petroleum gas...

49 CFR 174.204 - Tank car delivery of gases, including cryogenic liquids.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., including cryogenic liquids. (a) A tank car containing Class 2 (gases) material may not be unloaded unless... Division 2.1 (flammable gas) material that is a cryogenic liquid; or (ii) A tank car, except for a DOT-106A... ammonia; hydrogen chloride, refrigerated liquid; hydrocarbon gas, liquefied; or liquefied petroleum gas...

49 CFR 174.204 - Tank car delivery of gases, including cryogenic liquids.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., including cryogenic liquids. (a) A tank car containing Class 2 (gases) material may not be unloaded unless... Division 2.1 (flammable gas) material that is a cryogenic liquid; or (ii) A tank car, except for a DOT-106A... ammonia; hydrogen chloride, refrigerated liquid; hydrocarbon gas, liquefied; or liquefied petroleum gas...

49 CFR 174.204 - Tank car delivery of gases, including cryogenic liquids.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., including cryogenic liquids. (a) A tank car containing Class 2 (gases) material may not be unloaded unless... Division 2.1 (flammable gas) material that is a cryogenic liquid; or (ii) A tank car, except for a DOT-106A... ammonia; hydrogen chloride, refrigerated liquid; hydrocarbon gas, liquefied; or liquefied petroleum gas...

49 CFR 172.402 - Additional labeling requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 30, 2001, such as, a label without the hazard class or division number displayed in the lower corner... this section); and (2)For other than Class 1 or Class 2 materials (for subsidiary labeling requirements for Class 1 or Class 2 materials see paragraph (e) or paragraphs (f) and (g), respectively, of this...

Proceedings of the first switch tube advanced technology meeting held at EG G, Salem, Massachusetts, May 23, 1990

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shuman, A.; Beavis, L.

Early in 1990, J. A. Wilder, Supervisor of Sandia National Laboratories (SNLA), Division 2565 requested that a meeting of the scientists and engineers responsible for developing and producing switch tubes be set up to discuss in a semi-formal way the science and technology of switch tubes. Programmatic and administrative issues were specifically exempted from the discussions. L. Beavis, Division 7471, SNL and A. Shuman, EG G, Salem were made responsible for organizing a program including the materials and processes of switch tubes. The purpose of the Switch Tube Advanced Technology meeting was to allow personnel from Allied Signal Kansas Citymore » Division (AS/KCD); EG G, Salem and Sandia National Laboratories (SNL) to discuss a variety of issues involved in the development and production of switch tubes. It was intended that the formal and informal discussions would allow a better understanding of the production problems by material and process engineers and of the materials and processes by production engineers. This program consisted of formal presentations on May 23 and informal discussions on May 24. The topics chosen for formal presentation were suggested by the people of AS/KCD, EG G, Salem, and SNL involved with the design, development and production of switch tubes. The topics selected were generic. They were not directed to any specific switch tube but rather to all switch tubes in production and development. This document includes summaries of the material presented at the formal presentation on May 23.« less

Reliability of Triaxial Accelerometry for Measuring Load in Men's Collegiate Ice Hockey.

PubMed

Van Iterson, Erik H; Fitzgerald, John S; Dietz, Calvin C; Snyder, Eric M; Peterson, Ben J

2017-05-01

Van Iterson, EH, Fitzgerald, JS, Dietz, CC, Snyder, EM, and Peterson, BJ. Reliability of triaxial accelerometry for measuring load in men's collegiate ice hockey. J Strength Cond Res 31(5): 1305-1312, 2017-Wearable microsensor technology incorporating triaxial accelerometry is used to quantify an index of mechanical stress associated with sport-specific movements termed PlayerLoad. The test-retest reliability of PlayerLoad in the environmental setting of ice hockey is unknown. The primary aim of this study was to quantify the test-retest reliability of PlayerLoad in ice hockey players during performance of tasks simulating game conditions. Division I collegiate male ice hockey players (N = 8) wore Catapult Optimeye S5 monitors during repeat performance of 9 ice hockey tasks simulating game conditions. Ordered ice hockey tasks during repeated bouts included acceleration (forward or backward), 60% top-speed, top-speed (forward or backward), repeated shift circuit, ice coasting, slap shot, and bench sitting. Coefficient of variation (CV), intraclass correlation coefficient (ICC), and minimum difference (MD) were used to assess PlayerLoad reliability. Test-retest CVs and ICCs of PlayerLoad were as follows: 8.6% and 0.54 for forward acceleration, 13.8% and 0.78 for backward acceleration, 2.2% and 0.96 for 60% top-speed, 7.5% and 0.79 for forward top-speed, 2.8% and 0.96 for backward top-speed, 26.6% and 0.95 for repeated shift test, 3.9% and 0.68 for slap shot, 3.7% and 0.98 for coasting, and 4.1% and 0.98 for bench sitting, respectively. Raw differences between bouts were not significant for ice hockey tasks (p > 0.05). For each task, between-bout raw differences were lower vs. MD: 0.06 vs. 0.35 (forward acceleration), 0.07 vs. 0.36 (backward acceleration), 0.00 vs. 0.06 (60% top-speed), 0.03 vs. 0.20 (forward top-speed), 0.02 vs. 0.09 (backward top-speed), 0.18 vs. 0.64 (repeated shift test), 0.02 vs. 0.10 (slap shot), 0.00 vs. 0.10 (coasting), and 0.01 vs. 0.11 (bench sitting), respectively. These data suggest that PlayerLoad demonstrates moderate-to-large test-retest reliability in the environmental setting of male Division I collegiate ice hockey. Without previously testing reliability, these data are important as PlayerLoad is routinely quantified in male collegiate ice hockey to assess on ice physical activity.

Materials sciences programs: Fiscal year 1994

NASA Astrophysics Data System (ADS)

1995-04-01

The Division of Materials Sciences is located within the DOE in the Office of Basic Energy Sciences. The Division of Materials Sciences is responsible for basic research and research facilities in strategic materials science topics of critical importance to the mission of the Department and its Strategic Plan. Materials Science is an enabling technology. The performance parameters, economics, environmental acceptability and safety of all energy generation, conversion, transmission and conservation technologies are limited by the properties and behavior of materials. The Materials Sciences programs develop scientific understanding of the synergistic relationship amongst the synthesis, processing, structure, properties, behavior, performance and other characteristics of materials. Emphasis is placed on the development of the capability to discover technologically, economically, and environmentally desirable new materials and processes, and the instruments and national user facilities necessary for achieving such progress. Materials Sciences sub-fields include physical metallurgy, ceramics, polymers, solid state and condensed matter physics, materials chemistry, surface science and related disciplines where the emphasis is on the science of materials. This report includes program descriptions for 458 research programs including 216 at 14 DOE National Laboratories, 242 research grants (233 for universities), and 9 Small Business Innovation Research (SBIR) Grants. The report is divided into eight sections. Section A contains all Laboratory projects, Section B has all contract research projects, Section C has projects funded under the SBIR Program, Section D describes the Center of Excellence for the Synthesis and Processing of Advanced Materials and E has information on major user facilities. F contains descriptions of other user facilities; G, a summary of funding levels; and H, indices characterizing research projects.

Materials sciences programs, fiscal year 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-04-01

The Division of Materials Sciences is located within the DOE in the Office of Basic Energy Sciences. The Division of Materials Sciences is responsible for basic research and research facilities in strategic materials science topics of critical importance to the mission of the Department and its Strategic Plan. Materials Science is an enabling technology. The performance parameters, economics, environmental acceptability and safety of all energy generation, conversion, transmission and conservation technologies are limited by the properties and behavior of materials. The Materials Sciences programs develop scientific understanding of the synergistic relationship amongst the synthesis, processing, structure, properties, behavior, performance andmore » other characteristics of materials. Emphasis is placed on the development of the capability to discover technologically, economically, and environmentally desirable new materials and processes, and the instruments and national user facilities necessary for achieving such progress. Materials Sciences sub-fields include physical metallurgy, ceramics, polymers, solid state and condensed matter physics, materials chemistry, surface science and related disciplines where the emphasis is on the science of materials. This report includes program descriptions for 458 research programs including 216 at 14 DOE National Laboratories, 242 research grants (233 for universities), and 9 Small Business Innovation Research (SBIR) Grants. The report is divided into eight sections. Section A contains all Laboratory projects, Section B has all contract research projects, Section C has projects funded under the SBIR Program, Section D describes the Center of Excellence for the Synthesis and Processing of Advanced Materials and E has information on major user facilities. F contains descriptions of other user facilities; G, a summary of funding levels; and H, indices characterizing research projects.« less

Composing, Analyzing and Validating Software Models

NASA Astrophysics Data System (ADS)

Sheldon, Frederick T.

1998-10-01

This research has been conducted at the Computational Sciences Division of the Information Sciences Directorate at Ames Research Center (Automated Software Engineering Grp). The principle work this summer has been to review and refine the agenda that were carried forward from last summer. Formal specifications provide good support for designing a functionally correct system, however they are weak at incorporating non-functional performance requirements (like reliability). Techniques which utilize stochastic Petri nets (SPNs) are good for evaluating the performance and reliability for a system, but they may be too abstract and cumbersome from the stand point of specifying and evaluating functional behavior. Therefore, one major objective of this research is to provide an integrated approach to assist the user in specifying both functionality (qualitative: mutual exclusion and synchronization) and performance requirements (quantitative: reliability and execution deadlines). In this way, the merits of a powerful modeling technique for performability analysis (using SPNs) can be combined with a well-defined formal specification language. In doing so, we can come closer to providing a formal approach to designing a functionally correct system that meets reliability and performance goals.

Composing, Analyzing and Validating Software Models

NASA Technical Reports Server (NTRS)

Sheldon, Frederick T.

1998-01-01

This research has been conducted at the Computational Sciences Division of the Information Sciences Directorate at Ames Research Center (Automated Software Engineering Grp). The principle work this summer has been to review and refine the agenda that were carried forward from last summer. Formal specifications provide good support for designing a functionally correct system, however they are weak at incorporating non-functional performance requirements (like reliability). Techniques which utilize stochastic Petri nets (SPNs) are good for evaluating the performance and reliability for a system, but they may be too abstract and cumbersome from the stand point of specifying and evaluating functional behavior. Therefore, one major objective of this research is to provide an integrated approach to assist the user in specifying both functionality (qualitative: mutual exclusion and synchronization) and performance requirements (quantitative: reliability and execution deadlines). In this way, the merits of a powerful modeling technique for performability analysis (using SPNs) can be combined with a well-defined formal specification language. In doing so, we can come closer to providing a formal approach to designing a functionally correct system that meets reliability and performance goals.

Needs assessment for nondestructive testing and materials characterization for improved reliability in structural ceramics for heat engines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, D.R.; McClung, R.W.; Janney, M.A.

1987-08-01

A needs assessment was performed for nondestructive testing and materials characterization to achieve improved reliability in ceramic materials for heat engine applications. Raw materials, green state bodies, and sintered ceramics were considered. The overall approach taken to improve reliability of structural ceramics requires key inspections throughout the fabrication flowsheet, including raw materials, greed state, and dense parts. The applications of nondestructive inspection and characterization techniques to ceramic powders and other raw materials, green ceramics, and sintered ceramics are discussed. The current state of inspection technology is reviewed for all identified attributes and stages of a generalized flowsheet for advanced structuralmore » ceramics, and research and development requirements are identified and listed in priority order. 164 refs., 3 figs.« less

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Emergency Diversity and Inclusion Committee Members Lab Contacts Resources & Operations Acknowledging ; Finance Templates Travel One-Stop Personnel Resources Committees In Case of Emergency Looking for MSD0010

In Conversation with Mike Crommie

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mike Crommie

2010-02-16

Dec. 9 2009: Host Alice Egan of Berkeley Lab's Materials Sciences Division interviews scientists about their lives and work in language everyone can understand. Her guest is Berkeley Lab's Mike Crommie.

In Conversation with Mike Crommie

ScienceCinema

Mike Crommie

2017-12-09

Dec. 9 2009: Host Alice Egan of Berkeley Lab's Materials Sciences Division interviews scientists about their lives and work in language everyone can understand. Her guest is Berkeley Lab's Mike Crommie.

16-channel DWDM based on 1D defect mode nonlinear photonic crystal

NASA Astrophysics Data System (ADS)

Kalhan, Abhishek; Sharma, Sanjeev; Kumar, Arun

2018-05-01

We propose a sixteen-channel Dense Wavelength Division Multiplexer (DWDM), using the 1-D defect mode nonlinear photonic crystal which is a function of intensity as well as wavelength. Here, we consider an alternate layer of two semiconductor materials in which we found the bandgap of materials when defect layer is introduced then 16-channel dense wavelength division multiplexer is obtained within bandgap. From the theoretical analysis, we can achieve average quality factor of 7800.4, the uniform spectral line-width of 0.2 nm, crosstalk of -31.4 dB, central wavelength changes 0.07 nm/(1GW/cm2) and 100% transmission efficiency. Thus, Sixteen-channel DWDM has very high quality factor, low crosstalk, near 100% power transmission efficiency and small channel spacing (1.44 nm).

Use of Programmable Logic Controllers to Automate Control and Monitoring of U.S. Army Wastewater Treatment Systems

DTIC Science & Technology

1991-07-01

transmitter, usually reliable over extended periods (i.e., several months). Vendors: Bindicator Inc. Endress and Hauser Instruments Port Huron, MI 48061...Inc. MicroSwitch Division Michigan City, IN 46360 Honeywell (219/872- 𔃻. 11) Dayton, Ohio 45424 (513/237-4075) Endress & Hauser Instruments Greenwood...Honeywell (312/355-3055) Dayton, Ohio 45424 (513/237-4075) Endress & Hauser Instruments Greenwood, IN 46143 Omega Engineering Inc. (317/535-7138

National Socialist Ideology: Impact on Strategy and Operational Art

DTIC Science & Technology

2013-04-15

Another challenge to the army was the growth of the Waffen -SS within the Wehrmacht to ensure a politically and ideological reliable force committed...with the proper zeal to fight the struggle with Bolshevism.50 The Waffen -SS divisions achieved a higher level of motorization and mechanization...than their army counterparts and by 1943 the Waffen -SS represented five percent of the Wehrmacht’s fighting strength of 9,730,000 and more than more

Lewis Structures Technology, 1988. Volume 1: Structural Dynamics

NASA Technical Reports Server (NTRS)

1988-01-01

The specific purpose of the symposium was to familiarize the engineering structures community with the depth and range of research performed by the Structures Division of the Lewis Research Center and its academic and industrial partners. Sessions covered vibration control, fracture mechanics, ceramic component reliability, parallel computing, nondestructive testing, dynamical systems, fatigue and damage, wind turbines, hot section technology, structural mechanics codes, computational methods for dynamics, structural optimization, and applications of structural dynamics.

An Open Avionics and Software Architecture to Support Future NASA Exploration Missions

NASA Technical Reports Server (NTRS)

Schlesinger, Adam

2017-01-01

The presentation describes an avionics and software architecture that has been developed through NASAs Advanced Exploration Systems (AES) division. The architecture is open-source, highly reliable with fault tolerance, and utilizes standard capabilities and interfaces, which are scalable and customizable to support future exploration missions. Specific focus areas of discussion will include command and data handling, software, human interfaces, communication and wireless systems, and systems engineering and integration.

Metrics of Software Quality.

DTIC Science & Technology

1980-11-01

Systems: A Raytheon Project History", RADC-TR-77-188, Final Technical Report, June 1977. 4. IBM Federal Systems Division, "Statistical Prediction of...147, June 1979. 4. W. D. Brooks, R. W. Motley, "Analysis of Discrete Software Reliability Models", IBM Corp., RADC-TR-80-84, RADC, New York, April 1980...J. C. King of IBM (Reference 9) and Lori A. Clark (Reference 10) of the University of Massachusetts. Programs, so exercised must be augmented so they

Training Guide for Observation and Interviewing in Marine Corps Task Analysis. Training Manual 3

DTIC Science & Technology

1975-08-01

McGraw- Hill Book Co., 1954. This is a comprehensive text that treats theory and sta- tistical operations in psychological testing . Chapter 14 deals...with reliability and validity of measures. -44- Reliabilitv and Validity (cont’d.) Cronbach, L., ESSENTIALS OF PSYCHOLOGICAL TESTING , 2nd ed., New...Commandant of the Marine Corps (Code RD) And Monitored By Personnel and Training Research Programs Psychological Sciences Division Office of Naval

Greater Philadelphia Bioinformatics Alliance (GPBA) 3rd Annual Retreat 2005

DTIC Science & Technology

2005-11-01

Using Probabilistic Network Reliability. Genome Res. 14:1170-1175 [27] Batagelj , V. and Mrvar , A. (1998). Pajek: Program for large network analysis...and Neural Computation, Division of Informatics, Centre for Cognitive Science, University of Edinburgh, Scotland, April 1996 . www.anc.ed.ac.uk/-mjo...research center in the College of Engineering, and one of the foremost academic research centers in its field. From 1996 to 1998 he was the Founding

Evaluation of potential emission spectra for the reliable classification of fluorescently coded materials

NASA Astrophysics Data System (ADS)

Brunner, Siegfried; Kargel, Christian

2011-06-01

The conservation and efficient use of natural and especially strategic resources like oil and water have become global issues, which increasingly initiate environmental and political activities for comprehensive recycling programs. To effectively reutilize oil-based materials necessary in many industrial fields (e.g. chemical and pharmaceutical industry, automotive, packaging), appropriate methods for a fast and highly reliable automated material identification are required. One non-contacting, color- and shape-independent new technique that eliminates the shortcomings of existing methods is to label materials like plastics with certain combinations of fluorescent markers ("optical codes", "optical fingerprints") incorporated during manufacture. Since time-resolved measurements are complex (and expensive), fluorescent markers must be designed that possess unique spectral signatures. The number of identifiable materials increases with the number of fluorescent markers that can be reliably distinguished within the limited wavelength band available. In this article we shall investigate the reliable detection and classification of fluorescent markers with specific fluorescence emission spectra. These simulated spectra are modeled based on realistic fluorescence spectra acquired from material samples using a modern VNIR spectral imaging system. In order to maximize the number of materials that can be reliably identified, we evaluate the performance of 8 classification algorithms based on different spectral similarity measures. The results help guide the design of appropriate fluorescent markers, optical sensors and the overall measurement system.

Interim reliability-evaluation program: analysis of the Browns Ferry, Unit 1, nuclear plant. Appendix B - system descriptions and fault trees

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mays, S.E.; Poloski, J.P.; Sullivan, W.H.

1982-07-01

This report describes a risk study of the Browns Ferry, Unit 1, nuclear plant. The study is one of four such studies sponsored by the NRC Office of Research, Division of Risk Assessment, as part of its Interim Reliability Evaluation Program (IREP), Phase II. This report is contained in four volumes: a main report and three appendixes. Appendix B provides a description of Browns Ferry, Unit 1, plant systems and the failure evaluation of those systems as they apply to accidents at Browns Ferry. Information is presented concerning front-line system fault analysis; support system fault analysis; human error models andmore » probabilities; and generic control circuit analyses.« less

Split D Differential Probe Model Validation Using an Impedance Analyzer (Preprint)

DTIC Science & Technology

2014-02-01

AIR FORCE RESEARCH LABORATORY MATERIALS AND MANUFACTURING DIRECTORATE WRIGHT-PATTERSON AIR FORCE BASE, OH 45433-7750 AIR FORCE MATERIEL COMMAND... manufacture , use, or sell any patented invention that may relate to them. This report was cleared for public release by the USAF 88th Air Base Wing (88...Materials Division Materials and Manufacturing Directorate This report is published in the interest of scientific and technical information

49 CFR 173.13 - Exceptions for Class 3, Divisions 4.1, 4.2, 4.3, 5.1, 6.1, and Classes 8 and 9 materials.

Code of Federal Regulations, 2011 CFR

2011-10-01

... material must be placed in a tightly closed glass, plastic or metal inner packaging with a maximum capacity... placed in a hermetically sealed barrier bag which is impervious to the lading. (v) The intermediate... hazardous material must be placed in a tightly closed glass, plastic or metal inner packaging. The net...

49 CFR 173.13 - Exceptions for Class 3, Divisions 4.1, 4.2, 4.3, 5.1, 6.1, and Classes 8 and 9 materials.

Code of Federal Regulations, 2013 CFR

2013-10-01

... material must be placed in a tightly closed glass, plastic or metal inner packaging with a maximum capacity... placed in a hermetically sealed barrier bag which is impervious to the lading. (v) The intermediate... hazardous material must be placed in a tightly closed glass, plastic or metal inner packaging. The net...

49 CFR 173.13 - Exceptions for Class 3, Divisions 4.1, 4.2, 4.3, 5.1, 6.1, and Classes 8 and 9 materials.

Code of Federal Regulations, 2014 CFR

2014-10-01

... material must be placed in a tightly closed glass, plastic or metal inner packaging with a maximum capacity... placed in a hermetically sealed barrier bag which is impervious to the lading. (v) The intermediate... hazardous material must be placed in a tightly closed glass, plastic or metal inner packaging. The net...

49 CFR 173.13 - Exceptions for Class 3, Divisions 4.1, 4.2, 4.3, 5.1, 6.1, and Classes 8 and 9 materials.

Code of Federal Regulations, 2012 CFR

2012-10-01

... material must be placed in a tightly closed glass, plastic or metal inner packaging with a maximum capacity... placed in a hermetically sealed barrier bag which is impervious to the lading. (v) The intermediate... hazardous material must be placed in a tightly closed glass, plastic or metal inner packaging. The net...

49 CFR 173.13 - Exceptions for Class 3, Divisions 4.1, 4.2, 4.3, 5.1, 6.1, and Classes 8 and 9 materials.

Code of Federal Regulations, 2010 CFR

2010-10-01

... material must be placed in a tightly closed glass, plastic or metal inner packaging with a maximum capacity... placed in a hermetically sealed barrier bag which is impervious to the lading. (v) The intermediate... hazardous material must be placed in a tightly closed glass, plastic or metal inner packaging. The net...

Final Report of the Ad Hoc Subcommittee on Subject Analysis of African and Asian Materials. Subject Analysis Committee, Cataloging and Classification Section, Resources and Technical Services Division, ALA.

ERIC Educational Resources Information Center

Zuckerman, Arline; And Others

Six general recommendations reflect the findings from this final report on subject analysis of African and Asian library materials: (1) more specificity of headings, especially subdivisions and unique terms, are needed; (2) more attention should be given to Asian and African materials, using available expertise; (3) efforts to eliminate offensive…

High Strength Steel Welding Research

DTIC Science & Technology

2005-05-27

E.S.K. Menon, and M.G. Hall, "Sympathetic Nucleation: An Overview," Materials Science and Engineering B, Solid State Materials for Advanced Technology ...GTAW of Titanium Using Flux-cored Wire with Magnesium Fluoride Kook-soo Bang’, Greg Chirieleison 2, and Stephen Liu 2 1 Division of Advanced Materials...O CHAPTER I O INTRODUCTION * The application of advanced high strength low alloy (HSLA) steels has been * limited by the availability of suitable

Detection of climate signal in dendrochronological data analysis: a comparison of tree-ring standardization methods

NASA Astrophysics Data System (ADS)

Helama, S.; Lindholm, M.; Timonen, M.; Eronen, M.

2004-12-01

Tree-ring standardization methods were compared. Traditional methods along with the recently introduced approaches of regional curve standardization (RCS) and power-transformation (PT) were included. The difficulty in removing non-climatic variation (noise) while simultaneously preserving the low-frequency variability in the tree-ring series was emphasized. The potential risk of obtaining inflated index values was analysed by comparing methods to extract tree-ring indices from the standardization curve. The material for the tree-ring series, previously used in several palaeoclimate predictions, came from living and dead wood of high-latitude Scots pine in northernmost Europe. This material provided a useful example of a long composite tree-ring chronology with the typical strengths and weaknesses of such data, particularly in the context of standardization. PT stabilized the heteroscedastic variation in the original tree-ring series more efficiently than any other standardization practice expected to preserve the low-frequency variability. RCS showed great potential in preserving variability in tree-ring series at centennial time scales; however, this method requires a homogeneous sample for reliable signal estimation. It is not recommended to derive indices by subtraction without first stabilizing the variance in the case of series of forest-limit tree-ring data. Index calculation by division did not seem to produce inflated chronology values for the past one and a half centuries of the chronology (where mean sample cambial age is high). On the other hand, potential bias of high RCS chronology values was observed during the period of anomalously low mean sample cambial age. An alternative technique for chronology construction was proposed based on series age decomposition, where indices in the young vigorously behaving part of each series are extracted from the curve by division and in the mature part by subtraction. Because of their specific nature, the dendrochronological data here should not be generalized to all tree-ring records. The examples presented should be used as guidelines for detecting potential sources of bias and as illustrations of the usefulness of tree-ring records as palaeoclimate indicators.

Ceramic Technology for Advanced Heat Engines Project. Semiannual progress report, October 1984-March 1985

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1985-09-01

A five-year project plan was developed with extensive input from private industry. The objective of the project is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applicationsmore » in these engines.« less

Ceramic technology for advanced heat engines project: Semiannual progress report for April through September 1986

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1987-03-01

An assessment of needs was completed, and a five-year project plan was developed with extensive input from private industry. Objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barriermore » and wear applications in these engines.« less

Innovative Materials for Aircraft Morphing

NASA Technical Reports Server (NTRS)

Simpson, J. O.; Wise, S. A.; Bryant, R. G.; Cano, R. J.; Gates, T. S.; Hinkley, J. A.; Rogowski, R. S.; Whitley, K. S.

1997-01-01

Reported herein is an overview of the research being conducted within the Materials Division at NASA Langley Research Center on the development of smart material technologies for advanced airframe systems. The research is a part of the Aircraft Morphing Program which is a new six-year research program to develop smart components for self-adaptive airframe systems. The fundamental areas of materials research within the program are computational materials; advanced piezoelectric materials; advanced fiber optic sensing techniques; and fabrication of integrated composite structures. This paper presents a portion of the ongoing research in each of these areas of materials research.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Craig, D.F.

The division was formed in 1946 at the suggestion of Dr. Eugene P. Wigner to attack the problem of the distortion of graphite in the early reactors due to exposure to reactor neutrons, and the consequent radiation damage. It was called the Metallurgy Division and assembled the metallurgical and solid state physics activities of the time which were not directly related to nuclear weapons production. William A. Johnson, a Westinghouse employee, was named Division Director in 1946. In 1949 he was replaced by John H Frye Jr. when the Division consisted of 45 people. He was director during most ofmore » what is called the Reactor Project Years until 1973 and his retirement. During this period the Division evolved into three organizational areas: basic research, applied research in nuclear reactor materials, and reactor programs directly related to a specific reactor(s) being designed or built. The Division (Metals and Ceramics) consisted of 204 staff members in 1973 when James R. Weir, Jr., became Director. This was the period of the oil embargo, the formation of the Energy Research and Development Administration (ERDA) by combining the Atomic Energy Commission (AEC) with the Office of Coal Research, and subsequent formation of the Department of Energy (DOE). The diversification process continued when James O. Stiegler became Director in 1984, partially as a result of the pressure of legislation encouraging the national laboratories to work with U.S. industries on their problems. During that time the Division staff grew from 265 to 330. Douglas F. Craig became Director in 1992.« less

Some services of the Time and Frequency Division of the National Bureau of Standards

NASA Technical Reports Server (NTRS)

Barnes, J. A.

1973-01-01

The Time and Frequency Division of the National Bureau of Standards (NBS) provides several services to the general public. The radio broadcasts of WWV, WWVH, and WWVB supply reliable, unambiguous time signals to many users. The NBS telephone time-of-day service attracts several hundreds of thousands of calls each year. Periodically, the NBS provides courses on specific topics relating to time and frequency technology. In addition to numerous technical papers published each year, the NBS has prepared the first volume of a comprehensive monograph on time and frequency. The results of research in the Time and Frequency Division of the NBS have had significant impact. An active TV time system capable of serving most of the U.S. currently awaits a ruling by the FCC on a petition filed last year on behalf of the NBS by the Department of Commerce. Three more recent developments are: (1) a TV frequency comparator (patent applied for); (2) a method to perform an independent (absolute) frequency evaluation of commercial cesium beam oscillators; and (3) a method of removing one source of frequency drift in commercial cesium beam oscillators.

On a logical basis for division of responsibilities in statistical practice

NASA Technical Reports Server (NTRS)

Deming, W. Edwards

1966-01-01

The purpose of this paper is to explain principles for division of responsibilities between the statistician and the people that he works with, and reasons why this division of responsibilities is important -- that is, how it improves the performance of both statistician and expert in subject-matter. The aim is to find and illustrate principles of practice by which statisticians may make effective use of their knowledge of theory. The specialist in statistical methods may find himself applying the same basic theory in a dozen different fields in a week, rotating through the same projects the next week. Or, he may work day after day primarily in a single substantive field. Either way, he requires rules of practice. A statement of statistical reliability should present any information that might help the reader to form his own opinion concerning the validity of conclusions likely to be drawn from the results. The aim of a statistical report is to protect the client from seeing merely what he would like to see; to protect him from losses that could come from misuse of results. A further aim is to forestall unwarranted claims of accuracy that the client's public might otherwise accept.

Real-time sonoelastography using an external reference material: test-retest reliability of healthy Achilles tendons.

PubMed

Schneebeli, Alessandro; Del Grande, Filippo; Vincenzo, Gabriele; Cescon, Corrado; Clijsen, Ron; Biordi, Fulvio; Barbero, Marco

2016-08-01

To establish the test-retest reliability of sonoelastography (SE) on healthy Achilles tendons in contracted and relaxed states using an external reference system. Forty-eight Achilles tendons from 24 healthy volunteers were assessed using ultrasound and real-time SE with an external reference material. Tendons were analyzed under relaxed and contracted conditions. Strain ratios between the tendons and the reference material were calculated. The intraclass correlation coefficient (ICC2.k) and Bland-Altman plot were used to assess test-retest reliability. The reliability of SE measurements under relaxed conditions ranged from high to very high, with an ICC2.k of 0.84 (95 % CI: 0.64-0.92) for reference material, 0.91 (95 % CI: 0.83-0.95) for Achilles tendons and 0.95 (95 % CI: 0.91-0.97) for Kager fat pads (KFP). The ICC2.k value for skin was 0.30 (95 % CI: -0.26 to 0.61). Reliability for measurements in the contracted state ranged from high to very high, with an ICC2.k of 0.93 (95 % CI: 0.87-0.96) for reference material, 0.72 (95 % CI: 0.50-0.84) for skin, 0.93 (95 % CI: 0.87-0.96) for Achilles tendons, and 0.81 (95 % CI: 0.66-0.89) for KFP. Reliability of the strain ratio (tendon/reference) under relaxed conditions was high with an ICC2.k of 0.87 (95 % CI: 0.75-0.93), and in the contracted state, it was very high with an ICC2.k of 0.94 (95 % CI: 0.90-0.97). Sonoelastography using an external reference material is a reliable and simple technique for the assessment of the elasticity of healthy Achilles tendons. The use of an external material as a reference, along with strain ratios, could provide a quantitative measure of elasticity.

The SsgA-like proteins in actinomycetes: small proteins up to a big task

PubMed Central

Traag, Bjørn A.

2008-01-01

Several unique protein families have been identified that play a role in the control of developmental cell division in streptomycetes. The SsgA-like proteins or SALPs, of which streptomycetes typically have at least five paralogues, control specific steps of sporulation-specific cell division in streptomycetes, affecting cell wall-related events such as septum localization and synthesis, thickening of the spore wall and autolytic spore separation. The expression level of SsgA, the best studied SALP, has a rather dramatic effect on septation and on hyphal morphology, which is not only of relevance for our understanding of (developmental) cell division but has also been succesfully applied in industrial fermentation, to improve growth and production of filamentous actinomycetes. Recent observations suggest that SsgB most likely is the archetypal SALP, with only SsgB orthologues occurring in all morphologically complex actinomycetes. Here we review 10 years of research on the SsgA-like proteins in actinomycetes and discuss the most interesting regulatory, functional, phylogenetic and applied aspects of this relatively unknown protein family. Electronic supplementary material The online version of this article (doi:10.1007/s10482-008-9225-3) contains supplementary material, which is available to authorized users. PMID:18273689

Clean-Burning Diesel Engines.

DTIC Science & Technology

1986-03-01

Dietzmann L.R. Smith Engines, Emissions, and Vehicle Research Division Southwest Research Institute San Antonio, Texas Prepared for Belvoir Fuels and...replacing the currently used electric forklift with diesel engine-powered forklifts in handling hazardous materials. Electric -powered forklifts have no...diesel engines considered as potential candidates for forklift vehicles used to handle hazardous materials. The first program was conducted to

Facilitating Adoption of an Interactive E-Textbook among University Students in a Large, Introductory Biology Course

ERIC Educational Resources Information Center

Van Horne, Sam; Henze, Marisa; Schuh, Kathy L.; Colvin, Carolyn; Russell, Jae-Eun

2017-01-01

E-textbooks are more prevalent in college courses, but much recent research still shows that students prefer paper textbooks and have difficulty regulating their learning with digital course materials. Still, college instructors--especially in lower-division STEM courses--often adopt digital course materials with e-textbooks that include a variety…

49 CFR 385.402 - What definitions are used in this subpart?

Code of Federal Regulations, 2014 CFR

2014-10-01

... used to transport hazardous materials. Liquefied natural gas (LNG) means a Division 2.1 liquefied natural gas material that is transported in a liquid state with a methane content of 85 percent or more... 49 Transportation 5 2014-10-01 2014-10-01 false What definitions are used in this subpart? 385.402...

49 CFR 385.402 - What definitions are used in this subpart?

Code of Federal Regulations, 2012 CFR

2012-10-01

... used to transport hazardous materials. Liquefied natural gas (LNG) means a Division 2.1 liquefied natural gas material that is transported in a liquid state with a methane content of 85 percent or more... 49 Transportation 5 2012-10-01 2012-10-01 false What definitions are used in this subpart? 385.402...

49 CFR 385.402 - What definitions are used in this subpart?

Code of Federal Regulations, 2013 CFR

2013-10-01

... used to transport hazardous materials. Liquefied natural gas (LNG) means a Division 2.1 liquefied natural gas material that is transported in a liquid state with a methane content of 85 percent or more... 49 Transportation 5 2013-10-01 2013-10-01 false What definitions are used in this subpart? 385.402...

49 CFR 385.402 - What definitions are used in this subpart?

Code of Federal Regulations, 2011 CFR

2011-10-01

... used to transport hazardous materials. Liquefied natural gas (LNG) means a Division 2.1 liquefied natural gas material that is transported in a liquid state with a methane content of 85 percent or more... 49 Transportation 5 2011-10-01 2011-10-01 false What definitions are used in this subpart? 385.402...

78 FR 43270 - Office of Hazardous Materials Safety; Notice of Application for Special Permits

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-19

..., 3--Cargo vessel, 4--Cargo aircraft only, 5--Passenger-carrying aircraft. DATES: Comments must be... INFORMATION CONTACT: Copies of the applications are available for inspection in the Records Center, East.... transportation in commerce of not more than 5 grams of Division 1.4C materials in a special shipping container...

49 CFR 173.127 - Class 5, Division 5.1-Definition and assignment of packing groups.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Packing Group II, any material which exhibits a mean pressure rise time less than or equal to the pressure... Packing Group I are not met. (iii) Packing Group III, any material which exhibits a mean pressure rise... packing groups. 173.127 Section 173.127 Transportation Other Regulations Relating to Transportation...

49 CFR 173.127 - Class 5, Division 5.1-Definition and assignment of packing groups.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Packing Group II, any material which exhibits a mean pressure rise time less than or equal to the pressure... Packing Group I are not met. (iii) Packing Group III, any material which exhibits a mean pressure rise... packing groups. 173.127 Section 173.127 Transportation Other Regulations Relating to Transportation...

Bilingual Instructional Materials Dissemination Project. Report I: A Follow-Up Survey of SEDL Product Adopters.

ERIC Educational Resources Information Center

Butler, Jacqueline; McGinty, John

The Southwest Evaluation and Research Division conducted a survey of 165 purchasers of bilingual instructional materials produced by SEDL to determine which information channels predominate in the curriculum adoption-decision process. The findings of this survey may be useful in the selection of the most efficient ways to communicate information…

Probabilistic Finite Element Analysis & Design Optimization for Structural Designs

NASA Astrophysics Data System (ADS)

Deivanayagam, Arumugam

This study focuses on implementing probabilistic nature of material properties (Kevlar® 49) to the existing deterministic finite element analysis (FEA) of fabric based engine containment system through Monte Carlo simulations (MCS) and implementation of probabilistic analysis in engineering designs through Reliability Based Design Optimization (RBDO). First, the emphasis is on experimental data analysis focusing on probabilistic distribution models which characterize the randomness associated with the experimental data. The material properties of Kevlar® 49 are modeled using experimental data analysis and implemented along with an existing spiral modeling scheme (SMS) and user defined constitutive model (UMAT) for fabric based engine containment simulations in LS-DYNA. MCS of the model are performed to observe the failure pattern and exit velocities of the models. Then the solutions are compared with NASA experimental tests and deterministic results. MCS with probabilistic material data give a good prospective on results rather than a single deterministic simulation results. The next part of research is to implement the probabilistic material properties in engineering designs. The main aim of structural design is to obtain optimal solutions. In any case, in a deterministic optimization problem even though the structures are cost effective, it becomes highly unreliable if the uncertainty that may be associated with the system (material properties, loading etc.) is not represented or considered in the solution process. Reliable and optimal solution can be obtained by performing reliability optimization along with the deterministic optimization, which is RBDO. In RBDO problem formulation, in addition to structural performance constraints, reliability constraints are also considered. This part of research starts with introduction to reliability analysis such as first order reliability analysis, second order reliability analysis followed by simulation technique that are performed to obtain probability of failure and reliability of structures. Next, decoupled RBDO procedure is proposed with a new reliability analysis formulation with sensitivity analysis, which is performed to remove the highly reliable constraints in the RBDO, thereby reducing the computational time and function evaluations. Followed by implementation of the reliability analysis concepts and RBDO in finite element 2D truss problems and a planar beam problem are presented and discussed.

Some karyological observations on plants grown in space

NASA Technical Reports Server (NTRS)

Krikorian, A. D.; Oconnor, S. A.

1982-01-01

Experiments were conducted to assess whether cell division in a plant root would be affected by prolonged exposure to microgravity. Root materials from sunflower, oat, and mung bean plants grown on STS-2 and STS-3 were utilized for the experiments. It is found that all oat, sunflower, and mung seedlings showed a reduced number of cells in division as they went through their first cell division cycle on earth when compared to their ground controls. A significant number of oat, mung, and sunflower plantlets exhibited random root orientation and the lack of strictly orthotropic growth of their shoot systems in the flight samples. In addition, it is found that the mung roots were apparently least affected in terms of their cytology despite the fact that their roots were often randomly oriented.

Security analysis of orthogonal-frequency-division-multiplexing-based continuous-variable quantum key distribution with imperfect modulation

NASA Astrophysics Data System (ADS)

Zhang, Hang; Mao, Yu; Huang, Duan; Li, Jiawei; Zhang, Ling; Guo, Ying

2018-05-01

We introduce a reliable scheme for continuous-variable quantum key distribution (CV-QKD) by using orthogonal frequency division multiplexing (OFDM). As a spectrally efficient multiplexing technique, OFDM allows a large number of closely spaced orthogonal subcarrier signals used to carry data on several parallel data streams or channels. We place emphasis on modulator impairments which would inevitably arise in the OFDM system and analyze how these impairments affect the OFDM-based CV-QKD system. Moreover, we also evaluate the security in the asymptotic limit and the Pirandola-Laurenza-Ottaviani-Banchi upper bound. Results indicate that although the emergence of imperfect modulation would bring about a slight decrease in the secret key bit rate of each subcarrier, the multiplexing technique combined with CV-QKD results in a desirable improvement on the total secret key bit rate which can raise the numerical value about an order of magnitude.

Research on Separation of Three Powers Architecture for Trusted OS

NASA Astrophysics Data System (ADS)

Li, Yu; Zhao, Yong; Xin, Siyuan

The privilege in the operating system (OS) often results in the break of confidentiality and integrity of the system. To solve this problem, several security mechanisms are proposed, such as Role-based Access Control, Separation of Duty. However, these mechanisms can not eliminate the privilege in OS kernel layer. This paper proposes a Separation of Three Powers Architecture (STPA). The authorizations in OS are divided into three parts: System Management Subsystem (SMS), Security Management Subsystem (SEMS) and Audit Subsystem (AS). Mutual support and mutual checks and balances which are the design principles of STPA eliminate the administrator in the kernel layer. Furthermore, the paper gives the formal description for authorization division using the graph theory. Finally, the implementation of STPA is given. Proved by experiments, the Separation of Three Powers Architecture we proposed can provide reliable protection for the OS through authorization division.

Wide-field high-speed space-division multiplexing optical coherence tomography using an integrated photonic device

PubMed Central

Huang, Yongyang; Badar, Mudabbir; Nitkowski, Arthur; Weinroth, Aaron; Tansu, Nelson; Zhou, Chao

2017-01-01

Space-division multiplexing optical coherence tomography (SDM-OCT) is a recently developed parallel OCT imaging method in order to achieve multi-fold speed improvement. However, the assembly of fiber optics components used in the first prototype system was labor-intensive and susceptible to errors. Here, we demonstrate a high-speed SDM-OCT system using an integrated photonic chip that can be reliably manufactured with high precisions and low per-unit cost. A three-layer cascade of 1 × 2 splitters was integrated in the photonic chip to split the incident light into 8 parallel imaging channels with ~3.7 mm optical delay in air between each channel. High-speed imaging (~1s/volume) of porcine eyes ex vivo and wide-field imaging (~18.0 × 14.3 mm2) of human fingers in vivo were demonstrated with the chip-based SDM-OCT system. PMID:28856055

Skin Stem Cell Hypotheses and Long Term Clone Survival – Explored Using Agent-based Modelling

PubMed Central

Li, X.; Upadhyay, A. K.; Bullock, A. J.; Dicolandrea, T.; Xu, J.; Binder, R. L.; Robinson, M. K.; Finlay, D. R.; Mills, K. J.; Bascom, C. C.; Kelling, C. K.; Isfort, R. J.; Haycock, J. W.; MacNeil, S.; Smallwood, R. H.

2013-01-01

Epithelial renewal in skin is achieved by the constant turnover and differentiation of keratinocytes. Three popular hypotheses have been proposed to explain basal keratinocyte regeneration and epidermal homeostasis: 1) asymmetric division (stem-transit amplifying cell); 2) populational asymmetry (progenitor cell with stochastic fate); and 3) populational asymmetry with stem cells. In this study, we investigated lineage dynamics using these hypotheses with a 3D agent-based model of the epidermis. The model simulated the growth and maintenance of the epidermis over three years. The offspring of each proliferative cell was traced. While all lineages were preserved in asymmetric division, the vast majority were lost when assuming populational asymmetry. The third hypothesis provided the most reliable mechanism for self-renewal by preserving genetic heterogeneity in quiescent stem cells, and also inherent mechanisms for skin ageing and the accumulation of genetic mutation. PMID:23712735

Skin stem cell hypotheses and long term clone survival--explored using agent-based modelling.

PubMed

Li, X; Upadhyay, A K; Bullock, A J; Dicolandrea, T; Xu, J; Binder, R L; Robinson, M K; Finlay, D R; Mills, K J; Bascom, C C; Kelling, C K; Isfort, R J; Haycock, J W; MacNeil, S; Smallwood, R H

2013-01-01

Epithelial renewal in skin is achieved by the constant turnover and differentiation of keratinocytes. Three popular hypotheses have been proposed to explain basal keratinocyte regeneration and epidermal homeostasis: 1) asymmetric division (stem-transit amplifying cell); 2) populational asymmetry (progenitor cell with stochastic fate); and 3) populational asymmetry with stem cells. In this study, we investigated lineage dynamics using these hypotheses with a 3D agent-based model of the epidermis. The model simulated the growth and maintenance of the epidermis over three years. The offspring of each proliferative cell was traced. While all lineages were preserved in asymmetric division, the vast majority were lost when assuming populational asymmetry. The third hypothesis provided the most reliable mechanism for self-renewal by preserving genetic heterogeneity in quiescent stem cells, and also inherent mechanisms for skin ageing and the accumulation of genetic mutation.

Publications - SR 59 | Alaska Division of Geological & Geophysical Surveys

Science.gov Websites

Peninsula; Alaska, State of; Antimony; Arsenic; Arsenopyrite; Barite; Base Metals; Big Delta; Bismuth Materials; Copper; Core Drilling; Council; Crushed Gravel; Crushed Rock; Delta Junction; Diamond Drilling

7 CFR 295.6 - Public inspection and copying.

Code of Federal Regulations, 2011 CFR

2011-01-01

... inspection and copying. 5 U.S.C. 552(a)(2) requires that certain informational materials be made available... Records Management Officer, Information Technology Division, 3101 Park Center Drive, Alexandria, VA 22302...

Understanding the Reliability of Solder Joints Used in Advanced Structural and Electronics Applications: Part 2 - Reliability Performance.

DOE PAGES

Vianco, Paul T.

2017-03-01

Whether structural or electronic, all solder joints must provide the necessary level of reliability for the application. The Part 1 report examined the effects of filler metal properties and the soldering process on joint reliability. Filler metal solderability and mechanical properties, as well as the extents of base material dissolution and interface reaction that occur during the soldering process, were shown to affect reliability performance. The continuation of this discussion is presented in this Part 2 report, which highlights those factors that directly affect solder joint reliability. There is the growth of an intermetallic compound (IMC) reaction layer at themore » solder/base material interface by means of solid-state diffusion processes. In terms of mechanical response by the solder joint, fatigue remains as the foremost concern for long-term performance. Thermal mechanical fatigue (TMF), a form of low-cycle fatigue (LCF), occurs when temperature cycling is combined with mismatched values of the coefficient of thermal expansion (CTE) between materials comprising the solder joint “system.” Vibration environments give rise to high-cycle fatigue (HCF) degradation. Although accelerated aging studies provide valuable empirical data, too many variants of filler metals, base materials, joint geometries, and service environments are forcing design engineers to embrace computational modeling to predict the long-term reliability of solder joints.« less

Evaluation of ceramics for stator application: Gas turbine engine report

NASA Technical Reports Server (NTRS)

Trela, W.; Havstad, P. H.

1978-01-01

Current ceramic materials, component fabrication processes, and reliability prediction capability for ceramic stators in an automotive gas turbine engine environment are assessed. Simulated engine duty cycle testing of stators conducted at temperatures up to 1093 C is discussed. Materials evaluated are SiC and Si3N4 fabricated from two near-net-shape processes: slip casting and injection molding. Stators for durability cycle evaluation and test specimens for material property characterization, and reliability prediction model prepared to predict stator performance in the simulated engine environment are considered. The status and description of the work performed for the reliability prediction modeling, stator fabrication, material property characterization, and ceramic stator evaluation efforts are reported.

Theoretical and perceived balance of power inside Spanish public hospitals

PubMed Central

2001-01-01

Background The hierarchical pyramid inside Spanish public hospitals was radically changed by the Health Reform Law promulgated in 1986. According to it, the manpower of the hospitals was divided into three divisions (Medical, Nursing, General Services/Administration), which from then on occupied the same level, only subject to the general manager. Ten years after the implementation of the law, the present study was designed in order to investigate if the legal changes had indeed produced a real change in the balance of power inside the hospitals, as perceived by the different workers within them. Materials and Methods A questionnaire was administered to 1,027 workers from four different public hospitals (two university-based and two district hospitals). The participants belonged to all divisions, and to all three operative levels (staff, supervisory and managerial) within them. The questionnaire inquired about the perceived power inside each division and hierarchical level, as well as about that of the other divisions and hierarchical levels. Results Every division attributed the least power to itself. The Nursing and the Administrative division attributed the highest power to the physicians, and these attributed the highest power to the General Services/Administrative division. All hierarchical levels (including the formal top of the pyramid) attributed significantly more power to the other than to them. Conclusions More than ten years after the implementation of the new law, the majority of workers still perceive that the real power within the hospitals is held by the physicians (whereas these feel that it has shifted to the administrators). No division or hierarchical level believes it holds any significant degree of power, and this carries with it the danger of also not accepting any responsibility. PMID:11574049

Pathognomonic features of Angle's Class II division 2 malocclusion: A comparative cephalometric and arch width study

PubMed Central

Prasad, Singamsetty E.R.V.; Indukuri, Ravikishore Reddy; Singh, Rupesh; Nooney, Anitha; Palagiri, Firoz Babu; Narayana, Veera

2014-01-01

Background: A thorough knowledge of the salient features of malocclusion helps the clinician in arriving at a proper diagnosis and treatment plan, and also to predict the prognosis, prior to the onset of treatment process. Among the four classes of Angle's classification of malocclusion, Class II division 2 occurs with the least frequency. There is still continuing debate in the literature whether the Class II division 2 patients ascribe the pathognomonic skeletal and dental features. Aim of the study: The aim of this study is to describe the unique features of Angle's Class II division 2 malocclusion to differentiate it from Angle's Class II division 1 malocclusion. Materials and Methods: A total of 582 pre-treatment records (study models and cephalograms), with the age of patients ranging from 15 to 22 years, were obtained from the hospital records of Vishnu Dental College, Bhimavaram and Geetam's Dental College, Visakhapatnam. Out of these, 11 pre-treatment records were excluded because of lack of clarity. In the rest of the sample, 283 were Class II division 1 and 288 were Class II division 2. The lateral cephalograms were analyzed by using digiceph and the arch width analysis was done based on the anatomical points described by Staley et al. and Sergl et al. Results: An intergroup evaluation was done by using unpaired Student's “t” test. The skeletal vertical parameters, dental parameters, and the maxillary arch width parameters revealed a statistically significant difference between the two groups of malocclusion. Conclusion: Angle's Class II division 2 malocclusion has a pronounced horizontal growth pattern with decreased lower anterior facial height, retroclined upper anteriors, and significantly increased maxillary arch width parameters. PMID:25558449

Application of electron paramagnetic resonance imaging to the characterization of the Ultem(R) exposed to 1 MeV electrons. Correlation of radical density data to tiger code calculations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suleman, N.K.

1994-12-01

A major long-term goal of the Materials Division at the NASA Langley Research Center is the characterization of new high-performance materials that have potential applications in the aircraft industry, and in space. The materials used for space applications are often subjected to a harsh and potentially damaging radiation environment. The present study constitutes the application of a novel technique to obtain reliable data for ascertaining the molecular basis for the resilience and durability of materials that have been exposed to simulated space radiations. The radiations of greatest concern are energetic electrons and protons, as well as galactic cosmic rays. Presently,more » the effects of such radiation on matter are not understood in their entirety. It is clear however, that electron radiation causes ionization and homolytic bond rupture, resulting in the formation of paramagnetic spin centers in the polymer matrices of the structural materials. Since the detection and structure elucidation of paramagnetic species are most readily accomplished using Electron Paramagnetic Resonance (EPR) Spectroscopy, the NASA LaRC EPR system was brought back on-line during the 1991 ASEE term. The subsequent 1992 ASEE term was devoted to the adaptation of the EPR core system to meet the requirements for EPR Imaging (EPRI), which provides detailed information on the spatial distribution of paramagnetic species in bulk media. The present (1994) ASEE term was devoted to the calibration of this EPR Imaging system, as well as to the application of this technology to study the effects of electron irradiation on Ultem(exp R), a high performance polymer which is a candidate for applications in aerospace. The Ultem was exposed to a dose of 2.4 x 10(exp 9) Rads (1-MeV energy/electron) at the LaRC electron accelerator facility. Subsequently, the exposed specimens were stored in liquid nitrogen, until immediately prior to analyses by EPRI.« less

Airborne Navigation Remote Map Reader Evaluation.

DTIC Science & Technology

1986-03-01

EVALUATION ( James C. Byrd Intergrated Controls/Displays Branch SAvionics Systems Division Directorate of Avionics Engineering SMarch 1986 Final Report...Resolution 15 3.2 Accuracy 15 3.3 Symbology 15 3.4 Video Standard 18 3.5 Simulator Control Box 18 3.6 Software 18 3.7 Display Performance 21 3.8 Reliability 24...can be selected depending on the detail required and will automatically be presented at his present position. .The French RMR uses a Flying Spot Scanner

46 CFR 164.120-3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Commandant (CG-ENG-4), Attn: Lifesaving and Fire Safety Division, U.S. Coast Guard Stop 7509, 2703 Martin...: SPECIFICATIONS AND APPROVAL MATERIALS Fire Retardant Resins for Lifeboats and Rescue Boats § 164.120-3...

46 CFR 164.120-3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Commandant (CG-ENG-4), Attn: Lifesaving and Fire Safety Division, U.S. Coast Guard Stop 7509, 2703 Martin...: SPECIFICATIONS AND APPROVAL MATERIALS Fire Retardant Resins for Lifeboats and Rescue Boats § 164.120-3...

National Program for Inspection of Non-Federal Dams. Williams Pond Dam (CT 00551), Thames River Basin, Lebanon, Connecticut. Phase I Inspection Program.

DTIC Science & Technology

1978-10-01

GRA&I UnTucea B WILLIAMS POND DAM ~~1Z~ CT 00551 _ Distribution/ Availabilit Y Codes Avail and/or Dis~tj pecialS RIVER BASIN ~lIILEBANON, COXNNECTICUT...Inspection Report. Alternatives to these recommendations r 1 would include reducing the Williams Pond water levels during expected periods of intense storm...Materials Branch Engi’neering Division FRED J. VNS. Jr., Member Chief, De ’ggn Branch Engineering Division SAUL COOPER, -r Chief, Water Control Branch

Mathematics and Statistics Research Department progress report, period ending June 30, 1982

DOE Office of Scientific and Technical Information (OSTI.GOV)

Denson, M.V.; Funderlic, R.E.; Gosslee, D.G.

1982-08-01

This report is the twenty-fifth in the series of progress reports of the Mathematics and Statistics Research Department of the Computer Sciences Division, Union Carbide Corporation Nuclear Division (UCC-ND). Part A records research progress in analysis of large data sets, biometrics research, computational statistics, materials science applications, moving boundary problems, numerical linear algebra, and risk analysis. Collaboration and consulting with others throughout the UCC-ND complex are recorded in Part B. Included are sections on biology, chemistry, energy, engineering, environmental sciences, health and safety, materials science, safeguards, surveys, and the waste storage program. Part C summarizes the various educational activities inmore » which the staff was engaged. Part D lists the presentations of research results, and Part E records the staff's other professional activities during the report period.« less

Mathematics and statistics research department. Progress report, period ending June 30, 1981

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lever, W.E.; Kane, V.E.; Scott, D.S.

1981-09-01

This report is the twenty-fourth in the series of progress reports of the Mathematics and Statistics Research Department of the Computer Sciences Division, Union Carbide Corporation - Nuclear Division (UCC-ND). Part A records research progress in biometrics research, materials science applications, model evaluation, moving boundary problems, multivariate analysis, numerical linear algebra, risk analysis, and complementary areas. Collaboration and consulting with others throughout the UCC-ND complex are recorded in Part B. Included are sections on biology and health sciences, chemistry, energy, engineering, environmental sciences, health and safety research, materials sciences, safeguards, surveys, and uranium resource evaluation. Part C summarizes the variousmore » educational activities in which the staff was engaged. Part D lists the presentations of research results, and Part E records the staff's other professional activities during the report period.« less

Futurepath: The Story of Research and Technology at NASA Lewis Research Center. Structures for Flight Propulsion, ARC Sprayed Monotape, National Aero-Space Plane

NASA Technical Reports Server (NTRS)

1989-01-01

The story of research and technology at NASA Lewis Research Center's Structures Division is presented. The job and designs of the Structures Division needed for flight propulsion is described including structural mechanics, structural dynamics, fatigue, and fracture. The video briefly explains why properties of metals used in structural mechanics need to be tested. Examples of tests and simulations used in structural dynamics (bodies in motion) are briefly described. Destructive and non-destructive fatigue/fracture analysis is also described. The arc sprayed monotape (a composite material) is explained, as are the programs in which monotape plays a roll. Finally, the National Aero-Space Plane (NASP or x-30) is introduced, including the material development and metal matrix as well as how NASP will reduce costs for NASA.

Reliable WDM multicast in optical burst-switched networks

NASA Astrophysics Data System (ADS)

Jeong, Myoungki; Qiao, Chunming; Xiong, Yijun

2000-09-01

IN this paper,l we present a reliable WDM (Wavelength-Division Multiplexing) multicast protocol in optical burst-switched (OBS) networks. Since the burst dropping (loss) probability may be potentially high in a heavily loaded OBS backbone network, reliable multicast protocols that have developed for IP networks at the transport (or application) layer may incur heavy overheads such as a large number of duplicate retransmissions. In addition, it may take a longer time for an end host to detect and then recover from burst dropping (loss) occurred at the WDM layer. For efficiency reasons, we propose burst loss recovery within the OBS backbone (i.e., at the WDM link layer). The proposed protocol requires two additional functions to be performed by the WDM switch controller: subcasting and maintaining burst states, when the WDM switch has more than one downstream on the WDM multicast tree. We show that these additional functions are simple to implement and the overhead associated with them is manageable.

A Bayesian approach to reliability and confidence

NASA Technical Reports Server (NTRS)

Barnes, Ron

1989-01-01

The historical evolution of NASA's interest in quantitative measures of reliability assessment is outlined. The introduction of some quantitative methodologies into the Vehicle Reliability Branch of the Safety, Reliability and Quality Assurance (SR and QA) Division at Johnson Space Center (JSC) was noted along with the development of the Extended Orbiter Duration--Weakest Link study which will utilize quantitative tools for a Bayesian statistical analysis. Extending the earlier work of NASA sponsor, Richard Heydorn, researchers were able to produce a consistent Bayesian estimate for the reliability of a component and hence by a simple extension for a system of components in some cases where the rate of failure is not constant but varies over time. Mechanical systems in general have this property since the reliability usually decreases markedly as the parts degrade over time. While they have been able to reduce the Bayesian estimator to a simple closed form for a large class of such systems, the form for the most general case needs to be attacked by the computer. Once a table is generated for this form, researchers will have a numerical form for the general solution. With this, the corresponding probability statements about the reliability of a system can be made in the most general setting. Note that the utilization of uniform Bayesian priors represents a worst case scenario in the sense that as researchers incorporate more expert opinion into the model, they will be able to improve the strength of the probability calculations.

Reliable contact fabrication on nanostructured Bi2Te3-based thermoelectric materials.

PubMed

Feng, Shien-Ping; Chang, Ya-Huei; Yang, Jian; Poudel, Bed; Yu, Bo; Ren, Zhifeng; Chen, Gang

2013-05-14

A cost-effective and reliable Ni-Au contact on nanostructured Bi2Te3-based alloys for a solar thermoelectric generator (STEG) is reported. The use of MPS SAMs creates a strong covalent binding and more nucleation sites with even distribution for electroplating contact electrodes on nanostructured thermoelectric materials. A reliable high-performance flat-panel STEG can be obtained by using this new method.

Transient Reliability of Ceramic Structures For Heat Engine Applications

NASA Technical Reports Server (NTRS)

Nemeth, Noel N.; Jadaan, Osama M.

2002-01-01

The objectives of this report was to develop a methodology to predict the time-dependent reliability (probability of failure) of brittle material components subjected to transient thermomechanical loading, taking into account the change in material response with time. This methodology for computing the transient reliability in ceramic components subjected to fluctuation thermomechanical loading was developed, assuming SCG (Slow Crack Growth) as the delayed mode of failure. It takes into account the effect of varying Weibull modulus and materials with time. It was also coded into a beta version of NASA's CARES/Life code, and an example demonstrating its viability was presented.

Transportation of Hazardous Evidentiary Material.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Osborn, Douglas.

2005-06-01

This document describes the specimen and transportation containers currently available for use with hazardous and infectious materials. A detailed comparison of advantages, disadvantages, and costs of the different technologies is included. Short- and long-term recommendations are also provided.3 DraftDraftDraftExecutive SummaryThe Federal Bureau of Investigation's Hazardous Materials Response Unit currently has hazardous material transport containers for shipping 1-quart paint cans and small amounts of contaminated forensic evidence, but the containers may not be able to maintain their integrity under accident conditions or for some types of hazardous materials. This report provides guidance and recommendations on the availability of packages for themore » safe and secure transport of evidence consisting of or contaminated with hazardous chemicals or infectious materials. Only non-bulk containers were considered because these are appropriate for transport on small aircraft. This report will addresses packaging and transportation concerns for Hazardous Classes 3, 4, 5, 6, 8, and 9 materials. If the evidence is known or suspected of belonging to one of these Hazardous Classes, it must be packaged in accordance with the provisions of 49 CFR Part 173. The anthrax scare of several years ago, and less well publicized incidents involving unknown and uncharacterized substances, has required that suspicious substances be sent to appropriate analytical laboratories for analysis and characterization. Transportation of potentially hazardous or infectious material to an appropriate analytical laboratory requires transport containers that maintain both the biological and chemical integrity of the substance in question. As a rule, only relatively small quantities will be available for analysis. Appropriate transportation packaging is needed that will maintain the integrity of the substance, will not allow biological alteration, will not react chemically with the substance being shipped, and will otherwise maintain it as nearly as possible in its original condition.The recommendations provided are short-term solutions to the problems of shipping evidence, and have considered only currently commercially available containers. These containers may not be appropriate for all cases. Design, testing, and certification of new transportation containers would be necessary to provide a container appropriate for all cases.Table 1 provides a summary of the recommendations for each class of hazardous material.Table 1: Summary of RecommendationsContainerCost1-quart paint can with ArmlockTM seal ringLabelMaster(r)%242.90 eachHazard Class 3, 4, 5, 8, or 9 Small ContainersTC Hazardous Material Transport ContainerCurrently in Use4 DraftDraftDraftTable 1: Summary of Recommendations (continued)ContainerCost55-gallon open or closed-head steel drumsAll-Pak, Inc.%2458.28 - %2473.62 eachHazard Class 3, 4, 5, 8, or 9 Large Containers95-gallon poly overpack LabelMaster(r)%24194.50 each1-liter glass container with plastic coatingLabelMaster(r)%243.35 - %243.70 eachHazard Class 6 Division 6.1 Poisonous by Inhalation (PIH) Small ContainersTC Hazardous Material Transport ContainerCurrently in Use20 to 55-gallon PIH overpacksLabelMaster(r)%24142.50 - %24170.50 eachHazard Class 6 Division 6.1 Poisonous by Inhalation (PIH) Large Containers65 to 95-gallon poly overpacksLabelMaster(r)%24163.30 - %24194.50 each1-liter transparent containerCurrently in UseHazard Class 6 Division 6.2 Infectious Material Small ContainersInfectious Substance ShipperSource Packaging of NE, Inc.%24336.00 eachNone Commercially AvailableN/AHazard Class 6 Division 6.2 Infectious Material Large ContainersNone Commercially Available N/A5« less

Reliability of Scores Obtained from Self-, Peer-, and Teacher-Assessments on Teaching Materials Prepared by Teacher Candidates

ERIC Educational Resources Information Center

Nalbantoglu Yilmaz, Funda

2017-01-01

This study aims to determine the reliability of scores obtained from self-, peer-, and teacher-assessments in terms of teaching materials prepared by teacher candidates. The study group of this research constitutes 56 teacher candidates. In the scope of research, teacher candidates were asked to develop teaching material related to their study.…

Time-Variant Reliability Analysis for Rubber O-Ring Seal Considering Both Material Degradation and Random Load

PubMed Central

Liao, Baopeng; Yan, Meichen; Zhang, Weifang; Zhou, Kun

2017-01-01

Due to the increase in working hours, the reliability of rubber O-ring seals used in hydraulic systems of transfer machines will change. While traditional methods can only analyze one of the material properties or seal properties, the failure of the O-ring is caused by these two factors together. In this paper, two factors are mainly analyzed: the degradation of material properties and load randomization by processing technology. Firstly, the two factors are defined in terms of material failure and seal failure, before the experimental methods of rubber materials are studied. Following this, the time-variant material properties through experiments and load distribution by monitoring the processing can be obtained. Thirdly, compressive stress and contact stress have been calculated, which was combined with the reliability model to acquire the time-variant reliability for the O-ring. Finally, the life prediction and effect of oil pressure were discussed, then compared with the actual situation. The results show a lifetime of 12 months for the O-ring calculated in this paper, and compared with the replacement records from the maintenance workshop, the result is credible. PMID:29053597

Learning Peace (and Conflict): The Role of Primary Learning Materials in Peacebuilding in Post-War Afghanistan, South Sudan and Sri Lanka

ERIC Educational Resources Information Center

Vanner, Catherine; Akseer, Spogmai; Kovinthan, Thursica

2017-01-01

Post-war education is usually considered a positive contributor to peacebuilding; however, it can also reinforce divisive perspectives. Textbooks and learning materials can be instrumental in maintaining or exacerbating existing inequalities. This paper uses case study literature reviews of Afghanistan, South Sudan and Sri Lanka to explore the…