Science and worldviews in the marxist tradition

NASA Astrophysics Data System (ADS)

Skordoulis, C. D.

2008-06-01

This paper is about the relationship between Marxism, Science and Worldviews. In Section I, the paper gives a descriptive definition of the scientific viewpoint based on a materialist ontology, a realist epistemology, and the recognition that science is a social activity. The paper shows in Section II that there are currents in contemporary Marxism which relate favourably to science. In Section III, the paper examines Marx's encounter with Natural Philosophy and Materialism by analysing the influence of Epicurus on Marx. Section IV examines Marx's positive attitude towards natural science. Section V discusses the relation between science and ideology and proposes a scheme to defend the thesis that science establishes a conceptual autonomy from the forms of social consciousness existing in the social formation. Finally Section VI examines the historical infusion of Marxism into the Western scientific community in the 1930s, and the positions adopted by Marxists when they have considered science education.

50th Anniversary Celebration: 46th Sagamore Army Materials Research Conference on Advances and Needs in Multi-Spectral Transparent Materials Technology

DTIC Science & Technology

2008-09-01

68 (4), 883–887. Li, C-W.; Yamanishi, J. Ceram. Eng. Sci. Proc. 1989, 10, 632–645. Li, J.-G.; Ikegami , T .; Lee, J.-H.; Mori, T .; J. Am. Ceram. Soc...and Opening Remarks Dr. Allen Grum Associate Director for Science and Technology (S& T ), ARL The Impact of Research on Soldier Protection Ms. Jill...Crystal Systems, Dr. Chandra Khattak 3. MSI, Dr. Les Bowen 4. TA& T , Dr. Larry Fehrenbacher 5. CeraNova, Dr. Marina Pascucci Session IV

Foreign Trip Report MATGEN-IV Sep 24- Oct 26, 2007

DOE Office of Scientific and Technical Information (OSTI.GOV)

de Caro, M S

2007-10-30

Gen-IV activities in France, Japan and US focus on the development of new structural materials for Gen-IV nuclear reactors. Oxide dispersion strengthened (ODS) F/M steels have raised considerable interest in nuclear applications. Promising collaborations can be established seeking fundamental knowledge of relevant Gen-IV ODS steel properties (see attached travel report on MATGEN- IV 'Materials for Generation IV Nuclear Reactors'). Major highlights refer to results on future Ferritic/Martensitic steel cladding candidates (relevant to Gen-IV materials properties for LFR Materials Program) and on thermodynamic and mechanic behavior of metallic FeCr binary alloys, base matrix for future candidate steels (for the LLNL-LDRD projectmore » on Critical Issues on Materials for Gen-IV Reactors).« less

High Strength Steel Weldment Reliability: Weld Metal Hydrogen Trapping.

DTIC Science & Technology

1998-02-01

Reliability : Weld Metal Hydrogen Trapping submitted to : United States Army Research Office Materials Science Division P.O. Box 12211 Research Triangle...Conf. Proc. of Welding and Related Technologies for the XXIth Century, November 1998, Kiev, Ukraine : "Hydrogen Assisted Cracking in...appendices (see appendix IV). Next TTCP workshop will be held from 6th to 8th October 1998, at CANMET , Ottawa, Ontario, Canada. 20 III. Figures 18

Tuning the ferroelectric-to-paraelectric transition temperature and dipole orientation of group-IV monochalcogenide monolayers

NASA Astrophysics Data System (ADS)

Barraza-Lopez, Salvador; Kaloni, Thaneshwor P.; Poudel, Shiva P.; Kumar, Pradeep

2018-01-01

Coordination-related, two-dimensional (2D) structural phase transitions are a fascinating facet of two-dimensional materials with structural degeneracies. Nevertheless, a unified theoretical account of these transitions remains absent, and the following points are established through ab initio molecular dynamics and 2D discrete clock models here: Group-IV monochalcogenide (GeSe, SnSe, SnTe,...) monolayers have four degenerate structural ground states, and a phase transition from a threefold coordinated onto a fivefold coordinated structure takes place at finite temperature. On unstrained samples, this phase transition requires lattice parameters to evolve freely. A fundamental energy scale J permits understanding this transition, and numerical results indicate a transition temperature Tc of about 1.41 J . Numerical data provides a relation among the experimental (rhombic) parameter 〈Δ α 〉 [Chang et al., Science 353, 274 (2016), 10.1126/science.aad8609] and T of the form 〈Δ α 〉 =Δ α (T =0 ) (1-T /Tc)β , with a critical exponent β ≃1 /3 that coincides with experiment. It is also shown that 〈Δ α 〉 is temperature independent in another theoretical work [Fei et al., Phys. Rev. Lett. 117, 097601 (2016), 10.1103/PhysRevLett.117.097601], and thus incompatible with experiment. Tc and the orientation of the in-plane intrinsic electric dipole can be controlled by moderate uniaxial tensile strain, and a modified discrete clock model describes the transition on strained samples qualitatively. An analysis of out-of-plane fluctuations and a discussion of the need for van der Waals corrections to describe these materials are given too. These results provide an experimentally compatible framework to understand structural phase transitions in 2D materials and their effects on material properties.

Analysis of Cadmium in Undissolved Anode Materials of Mark-IV Electrorefiner

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tae-Sic Yoo; Guy L. Fredrickson; DeeEarl Vaden

2013-10-01

The Mark-IV electrorefiner (Mk-IV ER) contains an electrolyte/molten cadmium system for refining uranium electrochemically. Typically, the anode of the Mk-IV ER consists of the chopped sodium-bonded metallic driver fuels, which have been primarily U-10Zr binary fuels. Chemical analysis of the residual anode materials after electrorefining indicates that a small amount of cadmium is removed from the Mk-IV ER along with the undissolved anode materials. Investigation of chemical analysis data indicates that the amount of cadmium in the undissolved anode materials is strongly correlated with the anode rotation speeds and the residence time of the anode in the Mk-IV ER. Discussionsmore » are given to explain the prescribed correlation.« less

Analysis of cadmium in undissolved anode materials of Mark-IV electro-refiner

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoo, Tae-Sic; Fredrickson, G.L.; Vaden, D.

2013-07-01

The Mark-IV electro-refiner (Mk-IV ER) is a unit process in the FCF (Fuel Conditioning Facility), which is primarily assigned to treating the used driver fuels. Mk-IV ER contains an electrolyte/molten cadmium system for refining uranium electrochemically. Typically, the anode of the Mk-IV ER consists of the chopped sodium-bonded metallic driver fuels, which have been primarily U-10Zr binary fuels. Chemical analysis of the residual anode materials after electrorefining indicates that a small amount of cadmium is removed from the Mk-IV ER along with the undissolved anode materials. Investigation of chemical analysis data indicates that the amount of cadmium in the undissolvedmore » anode materials is strongly correlated with the anode rotation speeds and the residence time of the anode in the Mk-IV ER. Discussions are given to explain the prescribed correlation. (authors)« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Belinsky, S. A.; Hoover, M. D.; Bradley, P. L.

This document from the Inhalation Toxicology Research Institute includes annual reports in the following general areas: (I) Aerosol Technology and Characterization of Airborne Materials; (II) Deposition, transport, and clearance of inhaled Toxicants; (III) Metabolism and Markers of Inhaled Toxicants; (IV) Carcinogenic Responses to Toxicants; (V) Mechanisms of carcinogenic response to Toxicants; (VI) Non carcinogenic responses to inhaled toxicants; (VII) Mechanisms of noncarcinogenic Responses to Inhaled Toxicants; (VIII) The application of Mathematical Modeling to Risk Estimates. 9 appendices are also included. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

A Comparison of Two Methods Used for Ranking Task Exposure Levels Using Simulated Multi-Task Data

DTIC Science & Technology

1999-12-17

OF OKLAHOMA HEALTH SCIENCES CENTER GRADUATE COLLEGE A COMPARISON OF TWO METHODS USED FOR RANKING TASK EXPOSURE LEVELS USING SIMULATED MULTI-TASK...COSTANTINO Oklahoma City, Oklahoma 1999 ^ooo wx °^ A COMPARISON OF TWO METHODS USED FOR RANKING TASK EXPOSURE LEVELS USING SIMULATED MULTI-TASK DATA... METHODS AND MATERIALS 9 TV. RESULTS 14 V. DISCUSSION AND CONCLUSION 28 LIST OF REFERENCES 31 APPENDICES 33 Appendix A JJ -in Appendix B Dl IV

Synthesis, structure, and optoelectronic properties of II-IV-V 2 materials

DOE PAGES

Martinez, Aaron D.; Fioretti, Angela N.; Toberer, Eric S.; ...

2017-03-07

II-IV-V 2 materials offer the promise of enhanced functionality in optoelectronic devices due to their rich ternary chemistry. In this review, we consider the potential for new optoelectronic devices based on nitride, phosphide, and arsenide II-IV-V 2 materials. As ternary analogs to the III-V materials, these compounds share many of the attractive features that have made the III-Vs the basis of modern optoelectronic devices (e.g. high mobility, strong optical absorption). Control of cation order parameter in the II-IV-V 2 materials can produce significant changes in optoelectronic properties at fixed chemical composition, including decoupling band gap from lattice parameter. Recent progressmore » has begun to resolve outstanding questions concerning the structure, dopability, and optical properties of the II-IV-V 2 materials. Furthermore, remaining research challenges include growth optimization and integration into heterostructures and devices.« less

Materials science education: ion beam modification and analysis of materials

NASA Astrophysics Data System (ADS)

Zimmerman, Robert; Muntele, Claudiu; Ila, Daryush

2012-08-01

The Center for Irradiation of Materials (CIM) at Alabama A&M University (http://cim.aamu.edu) was established in 1990 to serve the University in its research, education and services to the need of the local community and industry. CIM irradiation capabilities are oriented around two tandem-type ion accelerators with seven beam lines providing high-resolution Rutherford backscattering spectrometry, MeV focus ion beam, high-energy ion implantation and irradiation damage studies, particle-induced X-ray emission, particle-induced gamma emission and ion-induced nuclear reaction analysis in addition to fully automated ion channeling. One of the two tandem ion accelerators is designed to produce high-flux ion beam for MeV ion implantation and ion irradiation damage studies. The facility is well equipped with a variety of surface analysis systems, such as SEM, ESCA, as well as scanning micro-Raman analysis, UV-VIS Spectrometry, luminescence spectroscopy, thermal conductivity, electrical conductivity, IV/CV systems, mechanical test systems, AFM, FTIR, voltammetry analysis as well as low-energy implanters, ion beam-assisted deposition and MBE systems. In this presentation, we will demonstrate how the facility is used in material science education, as well as providing services to university, government and industry researches.

78 FR 18374 - Promoting Economic Efficiency in Spectrum Use: WSRD SSG Workshop IV

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-26

... NATIONAL SCIENCE FOUNDATION Promoting Economic Efficiency in Spectrum Use: WSRD SSG Workshop IV... important next step, the economic and policy research that is needed to promote an efficient and shared spectrum environment. Submitted by the National Science Foundation for the National Coordination Office...

[Ag2M(Te2O5)2]SO4 (M = CeIV or ThIV): A New Purely Inorganic d/f-Heterometallic Cationic Material.

PubMed

Poe, Todd N; White, Frankie D; Proust, Vanessa; Villa, Eric M; Polinski, Matthew J

2018-05-07

Two new isotypic d/f-heterometallic purely inorganic cationic materials, [Ag 2 M(Te 2 O 5 ) 2 ]SO 4 (M = Ce IV or Th IV ), were synthesized using the metal oxides (MO 2 and TeO 2 ), silver nitrate, and sulfuric acid under mild hydrothermal conditions. The prepared materials were characterized via single-crystal X-ray diffraction, which revealed that the materials possess a 3D framework of corner-sharing Te 2 O 5 2- units. The tellurite framework creates four unique pores, three of which are occupied by the M IV and Ag I metal centers. The tellurite network, metal coordination, and total charge yield a cationic framework, which is charge-balanced by electrostatically bound sulfate anions residing in the largest of the four framework pores. These materials also possess Ag I in a ligand-imposed linear geometry.

Transferable tight-binding model for strained group IV and III-V materials and heterostructures

NASA Astrophysics Data System (ADS)

Tan, Yaohua; Povolotskyi, Michael; Kubis, Tillmann; Boykin, Timothy B.; Klimeck, Gerhard

2016-07-01

It is critical to capture the effect due to strain and material interface for device level transistor modeling. We introduce a transferable s p3d5s* tight-binding model with nearest-neighbor interactions for arbitrarily strained group IV and III-V materials. The tight-binding model is parametrized with respect to hybrid functional (HSE06) calculations for varieties of strained systems. The tight-binding calculations of ultrasmall superlattices formed by group IV and group III-V materials show good agreement with the corresponding HSE06 calculations. The application of the tight-binding model to superlattices demonstrates that the transferable tight-binding model with nearest-neighbor interactions can be obtained for group IV and III-V materials.

Material-specific retroactive interference effects of the Wechsler Adult Intelligence Scale-Fourth Edition on the Wechsler Memory Scale-Fourth Edition in a nonclinical sample.

PubMed

Ingram, Nicolette S; Diakoumakos, Jessica V; Sinclair, Erin R; Crowe, Simon F

2016-01-01

This study investigated proactive and retroactive interference effects between the Wechsler Memory Scale-Fourth Edition (WMS-IV) using the flexible approach, and the Wechsler Adult Intelligence Scale-Fourth Edition (WAIS-IV). One hundred and eighty nonclinical participants were assigned to a four (visual interference, verbal interference, visual and verbal interference, vs. no interference) by two (retroactive vs. proactive) between-subjects design. The administration order of the tests was counterbalanced (i.e., administration of the WAIS-IV prior to the WMS-IV, and the WAIS-IV administered during the delay interval of the WMS-IV). The WAIS-IV produced significant retroactive interference effects on the WMS-IV; however, no proactive interference effect was observed. The retroactive interference effect was dependent on material specificity. The results indicate that material presented within the delay of the WMS-IV can have a significant effect on subsequent delayed recall. Clinicians should carefully consider the effects associated with carry-over effects of these tests when using them in combination.

Postsynthesis Modification of a Metallosalen-Containing Metal-Organic Framework for Selective Th(IV)/Ln(III) Separation.

PubMed

Guo, Xiang-Guang; Qiu, Sen; Chen, Xiuting; Gong, Yu; Sun, Xiaoqi

2017-10-16

An uncoordinated salen-containing metal-organic framework (MOF) obtained through postsynthesis removal of Mn(III) ions from a metallosalen-containing MOF material has been used for selective separation of Th(IV) ion from Ln(III) ions in methanol solutions for the first time. This material exhibited an adsorption capacity of 46.345 mg of Th/g. The separation factors (β) of Th(IV)/La(III), Th(IV)/Eu(III), and Th(IV)/Lu(III) were 10.7, 16.4, and 10.3, respectively.

Direct Bandgap Group IV Materials

DTIC Science & Technology

2016-01-21

devices. In this project, we have accomplished (a) direct bandgap group IV materials of GeSn, (b) GeSn-based planar light - emitting diode operated at near...devices of planar light emitting diode , detector and laser ” 6/12/2015 PI and Co-PI information: - Name of Principal Investigators: Prof. H. H. Cheng...IV materials of GeSn, (b) GeSn-based planar light - emitting diode operated at near infrared with direct emission, and (c) the first planar

Synthesis of organically templated nanoporous tin (II/IV) phosphate for radionuclide and metal sequestration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wellman, Dawn M.; Mattigod, Shas V.; Parker, Kent E.

2006-03-20

Nanoporous tin (II/IV) phosphate materials, with spherical morphology, have been synthesized using cetyltrimethylammonium chloride (CH3(CH2)15N(CH3)3Cl) as the surfactant. The structure of the material is stable at 500°C; however, partial oxidation of the material occurs with redox conversion of Sn2+ to Sn4+, resulting in a mixed Sn(II)/ Sn(IV) material. Preliminary batch contact studies were conducted to assess the effectiveness of nanoporous tin phosphate, NP-SnPO, in sequestering redox sensitive metals and radionuclides, technetium(VII), neptunium(V), thorium(IV), and a toxic metal, chromium(VI), from aqueous matrices. Results indicate tin (II) phosphate removed > 95% of all contaminants investigated from solution.

Incorporating Inquiry into Upper-Level Undergraduate Homework Assignments: The Mini-Journal

NASA Astrophysics Data System (ADS)

Whittington, Alan; Speck, Angela; Witzig, Stephen; Abell, Sandra

2010-05-01

The US National Science Education Standards (2000) state that science should be taught through inquiry. The five essential features of classroom inquiry are that the leaner (i) engages in scientifically oriented questions, (ii) gives priority to evidence in responding to questions, (iii) formulates explanations from evidence, (iv) connects explanations to scientific knowledge, and (v) communicates and justifies explanations. One difficulty in achieving this vision at the university level lies in the common perception that inquiry be fully open and unstructured, and that its implementation will be impractical due to time and material constraints. In an NSF-funded project, "CUES: Connecting Undergraduates to the Enterprise of Science," faculty developed new inquiry-based laboratory curriculum materials using a "mini-journal" approach, which is designed as an alternative to the cookbook laboratory and represents the way that scientists do science. Here we adapt this approach to a homework assignment in an upper-level Planetary Science class, and show that inquiry is achievable in this setting. Traditional homeworks in this class consisted of problem sets requiring algebraic manipulation, computation, and in most cases an appraisal of the result Longer questions are broken down into chunks worth 1 to 4 points. In contrast, the mini-journal is a short article that is modeled in the way that scientists do and report science. It includes a title, abstract, introduction (with clear statement of the problem to be tackled), a description of the methods, results (presented as both tables and graphs), a discussion (with suggestions for future work) and a list of cited work. Students devise their research questions and hypothesis from the paper based on a logical next step in the investigation. Guiding questions in the discussion can assist the students ("it would be interesting to evaluate the effect of ..."). Students submit their own minijournal, using the same journal-style format. A detailed grading rubric was supplied with the mini-journal, with credit given for formatting, accuracy of calculation, and quality of intepretation and discussion. In the examples we present, research is conducted via spreadsheet modeling, where the students develop their own spreadsheets. The key differences between the old and new formats include (i) the active participation of the students in defining the problem that they will pursue, (ii) the open-ended nature of the inquiry, such that students need to recognize when they have enough information to answer their question, (iii) presentation of results in graphical and tabular formats, and (iv) a written discussion of their findings. Based on detailed student and instructor feedback, our conclusions are: (i) Limited inquiry is achievable in upper-level science homework assignments, and is transferable to other topics and classes (ii) Students experience discomfort on being presented with an open-ended assignment, but like the freedom to define their own homework problem (iii) Students recognize that the reading, writing and critical thinking skills employed in the minijournal format increase their understanding (iv) Students suggest a combination of minijournal and traditional homework formats in this class, or replacing midterm exams with minijournals (v) Student written comments are far more useful than Likert scale responses in assessing instructional techniques and effectiveness

Plumbing Specialist IV & V, 3-23. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

These military-developed curriculum materials consist of a course description, course chart, plan of instruction, lesson plans, study guides, and workbooks for use in training plumbing specialists IV and V. Covered in the course blocks are fixtures and appurtenances and utility equipment. Block IV on fixtures and appurtenances deals with…

Atomic-order thermal nitridation of group IV semiconductors for ultra-large-scale integration

NASA Astrophysics Data System (ADS)

Murota, Junichi; Le Thanh, Vinh

2015-03-01

One of the main requirements for ultra-large-scale integration (ULSI) is atomic-order control of process technology. Our concept of atomically controlled processing for group IV semiconductors is based on atomic-order surface reaction control in Si-based CVD epitaxial growth. On the atomic-order surface nitridation of a few nm-thick Ge/about 4 nm-thick Si0.5Ge0.5/Si(100) by NH3, it is found that N atoms diffuse through nm-order thick Ge layer into Si0.5Ge0.5/Si(100) substrate and form Si nitride, even at 500 °C. By subsequent H2 heat treatment, although N atomic amount in Ge layer is reduced drastically, the reduction of the Si nitride is slight. It is suggested that N diffusion in Ge layer is suppressed by the formation of Si nitride and that Ge/atomic-order N layer/Si1-xGex/Si (100) heterostructure is formed. These results demonstrate the capability of CVD technology for atomically controlled nitridation of group IV semiconductors for ultra-large-scale integration. Invited talk at the 7th International Workshop on Advanced Materials Science and Nanotechnology IWAMSN2014, 2-6 November, 2014, Ha Long, Vietnam.

Progress in Applied Surface, Interface and Thin Film Science 2015. Solar Renewable Energy News IV, November 23-26, 2015, Florence, Italy (SURFINT-SREN IV)

NASA Astrophysics Data System (ADS)

2017-02-01

The main goal of the conference is to contribute to new knowledge in surface, interface, ultra-thin films and very-thin films science of inorganic and organic materials by the most rapid interactive manner - by direct communication among scientists of corresponding research fields. The list of topics indicates that conference interests cover the development of basic theoretical physical and chemical principles and performance of surfaces-, thin films-, and interface-related procedures, and corresponding experimental research on atomic scale. Topical results are applied at development of new inventive industrial equipments needed for investigation of electrical, optical, and structural properties, and other parameters of atomic-size research objects. The conference range spreads, from physical point of view, from fundamental research done on sub-atomic and quantum level to production of devices built on new physical principles. The conference topics include also presentation of principally new devices in following fields: solar cells, liquid crystal displays, high-temperature superconductivity, and sensors. During the event, special attention will be given to evaluation of scientific and technical quality of works prepared by PhD students, to deep ecological meaning of solar cell energy production, and to exhibitions of companies.

A Joint Meeting of the US-Korea Workshop on Nanostructured Materials and Nanomanufacturing (5th) and the US-Korea Workshop on Nanoelectronics (3rd). Held in Los Angeles, California on August 8-9, 2006

DTIC Science & Technology

2007-09-10

ADJOURN 9 August 2006 (Wednesday) NANOMATERIALS - SESSION IV: (Sunset Village (SV) Delta Terrace B-3 House Lounge) Dr. Shih -Chi Liu (National Science...45 Prof. Fu- Kuo Chang (Stanford Univ.) "Nano-Reinforced Interface of Piezoeletric Sensors for Structural Health Monitoring" 09:10 Prof. Steven...Delta Terrace B- 4 House Lounge) Dr. Misoon Mah (Asian Office of Aerospace R&D), Moderator 08:10 Housekeeping 08:20 Prof. Hyun- Jung Shin (Kookmin

Agriculture on Mars: Soils for Plant Growth

NASA Technical Reports Server (NTRS)

Ming, D. W.

2016-01-01

Robotic rovers and landers have enabled the mineralogical, chemical, and physical characterization of loose, unconsolidated materials on the surface of Mars. Planetary scientists refer to the regolith material as "soil." NASA is currently planning to send humans to Mars in the mid 2030s. Early missions may rely on the use of onsite resources to enable exploration and self-sufficient outposts on Mars. The martian "soil" and surface environment contain all essential plant growth elements. The study of martian surface materials and how they might react as agricultural soils opens a new frontier for researchers in the soil science community. Other potential applications for surface "soils" include (i) sources for extraction of essential plant-growth nutrients, (ii) sources of O2, H2, CO2, and H2O, (iii) substrates for microbial populations in the degradation of wastes, and (iv) shielding materials surrounding outpost structures to protect humans, plants, and microorganisms from radiation. There are many challenges that will have to be addressed by soil scientists prior to human exploration over the next two decades.

[Forensic assessment of DSM-5 posttraumatic stress disorder: a commentary on the transition from DSM-IV-TR (I)].

PubMed

Stevens, A; Fabra, M

2013-12-01

In May 2013 the American Psychiatric Association (APA) has released the latest and fifth edition of the diagnostic and statistical manual of mental disorders (DSM-5). Like its predecessor, the DSM-IV-TR, it will have considerable impact on the science of Psychiatry. The DSM-5 describes - actually available in English - the present medical knowledge about mental disorders. In the short run, German medical science and scientific medicolegal expertises will continue to rely on the German version of the DSM-IV-TR, however, they will be difficult to defend without bearing in mind the changes that DSM-5 brings about. This report discusses the transition from DSM-IV-TR to DSM-5 with regard to posttraumatic stress disorder (PTSD) and provides suggestions, how the criteria might be evaluated.

JPRS Report, Science & Technology, USSR: Life Sciences

DTIC Science & Technology

1990-12-11

and duration of neutropenia . A specialized hospital treated 115 ARS patients with degrees of severity I-IV who were victims of the Cher- nobyl AES... neutropenia (less than 500 neutrophils per 1 ul). Five patients died between days 48 and 99, even after restoration of hemopoiesis. The infectious...radiation (15 to 34 days), duration of neutropenia with a cell count of 500 per 1 ul or less (6-22 days), severity of oropharyngeal syndrome (II-IV

Training Educators to Teach the Sun and Space Weather Using a Kit of Tools

NASA Astrophysics Data System (ADS)

Keesee, A. M.; Ensign, T.

2014-12-01

NASA provides a wealth of data from Heliospheric missions to the public, but educators face several challenges to using such data in the classroom. These include the knowledge of what is available and how to use it, a full understanding of the science concepts the data demonstrate, ability to obtain and maintain products to access data, and access to technology (such as computer labs) for anything other than testing. To surmount these challenges, the Educator Resource Center at the NASA Independent Validation and Verification (IV&V) Center in Fairmont, WV has developed an operational model that focuses on housing, maintaining, and lending out kits of necessary equipment along with training educators in the science concepts and use of kit materials. Following this model, we have developed a Sun and Space Weather kit and an educator professional development course that we have presented several times. The kit includes a classroom set of iPads utilized to access data from NASA missions and other sources as well as create video reports for project based outcomes, a set of telescopes for safe solar viewing, and materials to explore magnetic fields and the electromagnetic spectrum. We will present an overview of the training course, the kit materials, and lessons learned.

10 CFR 35.396 - Training for the parenteral administration of unsealed byproduct material requiring a written...

Code of Federal Regulations, 2013 CFR

2013-01-01

... radioactivity; (iv) Chemistry of byproduct material for medical use; and (v) Radiation biology; and (2) Has work...). The work experience must involve— (i) Ordering, receiving, and unpacking radioactive materials safely... meters; (iii) Calculating, measuring, and safely preparing patient or human research subject dosages; (iv...

10 CFR 35.396 - Training for the parenteral administration of unsealed byproduct material requiring a written...

Code of Federal Regulations, 2014 CFR

2014-01-01

... radioactivity; (iv) Chemistry of byproduct material for medical use; and (v) Radiation biology; and (2) Has work...). The work experience must involve— (i) Ordering, receiving, and unpacking radioactive materials safely... meters; (iii) Calculating, measuring, and safely preparing patient or human research subject dosages; (iv...

10 CFR 35.396 - Training for the parenteral administration of unsealed byproduct material requiring a written...

Code of Federal Regulations, 2012 CFR

2012-01-01

... radioactivity; (iv) Chemistry of byproduct material for medical use; and (v) Radiation biology; and (2) Has work...). The work experience must involve— (i) Ordering, receiving, and unpacking radioactive materials safely... meters; (iii) Calculating, measuring, and safely preparing patient or human research subject dosages; (iv...

10 CFR 35.396 - Training for the parenteral administration of unsealed byproduct material requiring a written...

Code of Federal Regulations, 2011 CFR

2011-01-01

... radioactivity; (iv) Chemistry of byproduct material for medical use; and (v) Radiation biology; and (2) Has work...). The work experience must involve— (i) Ordering, receiving, and unpacking radioactive materials safely... meters; (iii) Calculating, measuring, and safely preparing patient or human research subject dosages; (iv...

Indian Vacuum Society: The Indian Vacuum Society

NASA Astrophysics Data System (ADS)

Saha, T. K.

2008-03-01

The Indian Vacuum Society (IVS) was established in 1970. It has over 800 members including many from Industry and R & D Institutions spread throughout India. The society has an active chapter at Kolkata. The society was formed with the main aim to promote, encourage and develop the growth of Vacuum Science, Techniques and Applications in India. In order to achieve this aim it has conducted a number of short term courses at graduate and technician levels on vacuum science and technology on topics ranging from low vacuum to ultrahigh vacuum So far it has conducted 39 such courses at different parts of the country and imparted training to more than 1200 persons in the field. Some of these courses were in-plant training courses conducted on the premises of the establishment and designed to take care of the special needs of the establishment. IVS also regularly conducts national and international seminars and symposia on vacuum science and technology with special emphasis on some theme related to applications of vacuum. A large number of delegates from all over India take part in the deliberations of such seminars and symposia and present their work. IVS also arranges technical visits to different industries and research institutes. The society also helped in the UNESCO sponsored post-graduate level courses in vacuum science, technology and applications conducted by Mumbai University. The society has also designed a certificate and diploma course for graduate level students studying vacuum science and technology and has submitted a syllabus to the academic council of the University of Mumbai for their approval, we hope that some colleges affiliated to the university will start this course from the coming academic year. IVS extended its support in standardizing many of the vacuum instruments and played a vital role in helping to set up a Regional Testing Centre along with BARC. As part of the development of vacuum education, the society arranges the participation of expert members on the subject to deliver lectures and take part in devising courses in the universities. IVS publishes a quarterly called the `Bulletin of Indian Vacuum Society' since its inception, in which articles on vacuum and related topics are published. NIRVAT, news, announcements, and reports are the other features of the Bulletin. The articles in the Bulletin are internationally abstracted. The Bulletin is distributed free to all the members of the society. The society also publishes proceedings of national/international symposia and seminars, manuals, lecture notes etc. It has published a `Vacuum Directory' containing very useful information on vacuum technology. IVS has also set up its own website http://www.ivsnet.org in January 2002. The website contains information about IVS, list of members, list of EC members, events and news, abstracts of articles published in the `Bulletin of Indian Vacuum Society', utilities, announcements, reports, membership and other forms which can be completed online and also gives links to other vacuum societies. Our Society has been a member of the executive council of the International Union of Vacuum Science, Techniques and Applications (IUVSTA) and its various committees since 1970. In 1983 IVS conducted an International Symposium on Vacuum Technology and Nuclear Applications in BARC, Mumbai, under the sponsorship of IUVSTA. In 1987 IVS arranged the Triennial International Conference on Thin Films in New Delhi, where more than 200 foreign delegates participated. IVS also hosted the IUVSTA Executive Council Meeting along with the conference. The society organized yet again an International Conference on Vacuum Science and Technology and SRS Vacuum Systems at CAT, Indore in1995. IVS arranges the prestigious Professor Balakrishnan Memorial Lecture in memory of its founder vice-president. Leading scientists from India and abroad in the field are invited to deliver the talks. So far 23 lectures have been held in this series. IVS has instituted the `IVS- Professor D Y Phadke Memorial Prize' in memory of our founder president, the late Professor D Y Phadke at the University of Mumbai. The prize is given every year to the student ranked top in the MSc (PHY.) examination conducted by the university. The IVS Kolkata Chapter has established the Dr A S Divatia Memorial Trust with the objective of organizing the Dr A S Divatia Memorial Lecture and a seminar once a year and to set up a vacuum testing and calibration facility. IVS has instituted an award in memory of the late Shri C Ambasankaran, its past president and pioneer of vacuum technology in India. This award is given to one of the best papers presented in the national symposium conducted by IVS. One more best paper award `Smt. Shakuntalabai Vyawahare Memorial Prize' is established from a donation given by Shri Mohan R Vyawahare, a life member and a present EC member of the society, in memory of his mother. During the symposia, IVS felicitates two of its members, one from Industry and one from an R & D Institution for their lifetime contribution to vacuum science and technology. Dr A K Gupta, Ex BARC, Ex Generla Manager, IBP, Head, Energy Group, Shapoorji Pallonji & Co Ltd (Industry), and Dr S R Gowariker, Ex BARC, Ex Director, CSIO, Chandigarh, Director, Tolani Education Foundation (R & D) are being honoured this year. T K Saha Geneneral Secretary, IVS

The New Physics

NASA Astrophysics Data System (ADS)

Fraser, Gordon

2006-04-01

Introduction Gordon Fraser; Part I. Matter and the Universe: 1. Cosmology Wendy Freedman and Rocky Kolb; 2. Gravity Ronald Adler; 3. Astrophysics Arnon Dar; 4. Particles and the standard model Chris Quigg; 5. Superstrings Michael Green; Part II. Quantum Matter: 6. Atoms and photons Claude Cohen-Tannoudji and Jean Dalibard; 7. The quantum world of ultra-cold atoms Christopher Foot and William Phillips; 8. Superfluidity Henry Hall; 9. Quantum phase transitions Subir Sachdev; Part III. Quanta in Action: 10. Quantum entanglement Anton Zeilinger; 11. Quanta, ciphers and computers Artur Ekert; 12. Small-scale structure and nanoscience Yoseph Imry; Part IV. Calculation and Computation: 13. Nonlinearity Henry Abarbanel; 14. Complexity Antonio Politi; 15. Collaborative physics, e-science and the grid Tony Hey and Anne Trefethen; Part V. Science in Action: 16. Biophysics Cyrus Safinya; 17. Medical physics Nicolaj Pavel; 18. Physics and materials Robert Cahn; 19. Physics and society Ugo Amaldi.

The New Physics

NASA Astrophysics Data System (ADS)

Fraser, Gordon

2009-08-01

Introduction Gordon Fraser; Part I. Matter and the Universe: 1. Cosmology Wendy Freedman and Rocky Kolb; 2. Gravity Ronald Adler; 3. Astrophysics Arnon Dar; 4. Particles and the standard model Chris Quigg; 5. Superstrings Michael Green; Part II. Quantum Matter: 6. Atoms and photons Claude Cohen-Tannoudji and Jean Dalibard; 7. The quantum world of ultra-cold atoms Christopher Foot and William Phillips; 8. Superfluidity Henry Hall; 9. Quantum phase transitions Subir Sachdev; Part III. Quanta in Action: 10. Quantum entanglement Anton Zeilinger; 11. Quanta, ciphers and computers Artur Ekert; 12. Small-scale structure and nanoscience Yoseph Imry; Part IV. Calculation and Computation: 13. Nonlinearity Henry Abarbanel; 14. Complexity Antonio Politi; 15. Collaborative physics, e-science and the grid Tony Hey and Anne Trefethen; Part V. Science in Action: 16. Biophysics Cyrus Safinya; 17. Medical physics Nicolaj Pavel; 18. Physics and materials Robert Cahn; 19. Physics and society Ugo Amaldi.

International VLBI Service for Geodesy and Astrometry: General Meeting Proceedings

NASA Technical Reports Server (NTRS)

Vandenberg, Nancy R. (Editor); Baver, Karen D. (Editor)

2002-01-01

This volume contains the proceedings of the second General Meeting of the International VLBI Service for Geodesy and Astrometry (IVS), held in Tsukuba, Japan, February 4-7, 2002. The contents of this volume also appear on the IVS Web site at http://ivscc.gsfc.nasa.gov/publications/gm2002. The key-note of the second GM was prospectives for the future, in keeping with the re-organization of the IAG around the motivation of geodesy as 'an old science with a dynamic future' and noting that providing reference frames for Earth system science that are consistent over decades on the highest accuracy level will provide a challenging role for IVS. The goal of the meeting was to provide an interesting and informative program for a wide cross section of IVS members, including station operators, program managers, and analysts. This volume contains 72 papers and five abstracts of papers presented at the GM. The volume also includes reports about three splinter meetings held in conjunction with the GM: a mini-TOW (Technical Operations Workshop), the third IVS Analysis Workshop and a meeting of the analysis working group on geophysical modeling.

DECS tries out instructional materials on AIDS prevention education.

PubMed

1994-01-01

A national try-out of the newly developed print and non-print instructional materials on AIDS Education is being conducted by the Department of Education, Culture and Sports (DECS) this school year 1993-to 1994. To determine the effectiveness of these materials, various public and private schools in Region IV (Southern Tagalog), VII (Central Visayas) XI (Southern Mindanao) and National Capital Region (Metro, Manila) were chosen as try-out institutions. The AIDS education materials will be tried out in different subjects in some grade and year levels such as civics and culture (grade one); science and health (grades three and six); home economics and livelihood education (grade five); physical education, health and music (second year) and Pilipino Language (third year). The materials for the elementary level consist of posters, cut-out pictures, voice tapes, jingles, talking books and slides, while the secondary school level utilizes modules. For the tertiary level, a Resource Book on AIDS Prevention Education is used by the Teacher Training Institutions and the Non-Formal Education employs the Facilitator's Guide for Levels I-III. These materials will be tried out in both urban and rural schools, with control school and experimental school at each level. full text

Method of preparation of uranium nitride

DOEpatents

Kiplinger, Jaqueline Loetsch; Thomson, Robert Kenneth James

2013-07-09

Method for producing terminal uranium nitride complexes comprising providing a suitable starting material comprising uranium; oxidizing the starting material with a suitable oxidant to produce one or more uranium(IV)-azide complexes; and, sufficiently irradiating the uranium(IV)-azide complexes to produce the terminal uranium nitride complexes.

75 FR 5502 - Belarus Sanctions Regulations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-03

... to engage in public corruption, including by diverting or misusing Belarusian public assets or by... responsible for or has engaged in public corruption related to Belarus; (iv) to have materially assisted... responsible for or has engaged in public corruption related to Belarus; (iv) To have materially assisted...

Structural materials for Gen-IV nuclear reactors: Challenges and opportunities

NASA Astrophysics Data System (ADS)

Murty, K. L.; Charit, I.

2008-12-01

Generation-IV reactor design concepts envisioned thus far cater toward a common goal of providing safer, longer lasting, proliferation-resistant and economically viable nuclear power plants. The foremost consideration in the successful development and deployment of Gen-IV reactor systems is the performance and reliability issues involving structural materials for both in-core and out-of-core applications. The structural materials need to endure much higher temperatures, higher neutron doses and extremely corrosive environment, which are beyond the experience of the current nuclear power plants. Materials under active consideration for use in different reactor components include various ferritic/martensitic steels, austenitic stainless steels, nickel-base superalloys, ceramics, composites, etc. This paper presents a summary of various Gen-IV reactor concepts, with emphasis on the structural materials issues depending on the specific application areas. This paper also discusses the challenges involved in using the existing materials under both service and off-normal conditions. Tasks become increasingly complex due to the operation of various fundamental phenomena like radiation-induced segregation, radiation-enhanced diffusion, precipitation, interactions between impurity elements and radiation-produced defects, swelling, helium generation and so forth. Further, high temperature capability (e.g. creep properties) of these materials is a critical, performance-limiting factor. It is demonstrated that novel alloy and microstructural design approaches coupled with new materials processing and fabrication techniques may mitigate the challenges, and the optimum system performance may be achieved under much demanding conditions.

7 CFR 3405.11 - Content of a proposal.

Code of Federal Regulations, 2013 CFR

2013-01-01

... and agricultural sciences in the United States; and the plans for disseminating project results. The... the quality of higher education in the food and agricultural sciences. (iv) Products and results... agricultural sciences higher education in the United States. (2) Overall approach and cooperative linkages—(i...

7 CFR 3405.11 - Content of a proposal.

Code of Federal Regulations, 2014 CFR

2014-01-01

... and agricultural sciences in the United States; and the plans for disseminating project results. The... the quality of higher education in the food and agricultural sciences. (iv) Products and results... agricultural sciences higher education in the United States. (2) Overall approach and cooperative linkages—(i...

7 CFR 3405.11 - Content of a proposal.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and agricultural sciences in the United States; and the plans for disseminating project results. The... the quality of higher education in the food and agricultural sciences. (iv) Products and results... agricultural sciences higher education in the United States. (2) Overall approach and cooperative linkages—(i...

Queering high school biology textbooks

NASA Astrophysics Data System (ADS)

Snyder, Vicky L.; Broadway, Francis S.

2004-08-01

As teachers committed to educating all students, we need to learn more about how instructional materials shape representations of sexuality and gender. Through its insistent deconstruction of the norms that structure practice and belief, queer theory offers perspectives from which science educators can question assumptions embedded in textbooks. This article applies queer theory to analyze eight biology textbooks used in the United States. Specifically, we ask how biology textbooks address sexuality outside the heterosexual norm and if they propagate heteronormative attitudes. The textbooks examined offer deafening silences, antiseptic factoids, socially sanitized concepts, and politically correct binary-gendered illustrations. In these textbooks, the term homosexuality was used only in the context of AIDS where, along with iv drug users, they were identified as an affected group. The pervasive acceptance of heteronormative behavior privileges students that fit the heterosexual norm, and oppresses through omission and silence those who do not. We offer implications for practice to help science educators broaden their perspectives on the constructs of sexuality and gender to construct new ways of knowing and understanding differences in science classrooms and the natural world.

26 CFR 1.1321-1 - Involuntary liquidation of lifo inventories.

Code of Federal Regulations, 2011 CFR

2011-04-01

... shall be increased to the extent of such difference. Any deficiency in the income or excess profits tax... shortages; (iii) to material shortages resulting from priorities or allocations; (iv) to labor shortages; or... shortages; (iii) material shortages resulting from priorities or allocations; (iv) labor shortages; and (v...

7 CFR 3406.13 - Content of a teaching proposal.

Code of Federal Regulations, 2012 CFR

2012-01-01

... project will strengthen higher education in the food and agricultural sciences in the United States; a... higher education in the food and agricultural sciences. (iv) Products and results. Explain the kinds of results and products expected and their impact on strengthening food and agricultural sciences higher...

7 CFR 3406.13 - Content of a teaching proposal.

Code of Federal Regulations, 2011 CFR

2011-01-01

... project will strengthen higher education in the food and agricultural sciences in the United States; a... higher education in the food and agricultural sciences. (iv) Products and results. Explain the kinds of results and products expected and their impact on strengthening food and agricultural sciences higher...

7 CFR 3406.13 - Content of a teaching proposal.

Code of Federal Regulations, 2013 CFR

2013-01-01

... project will strengthen higher education in the food and agricultural sciences in the United States; a... higher education in the food and agricultural sciences. (iv) Products and results. Explain the kinds of results and products expected and their impact on strengthening food and agricultural sciences higher...

7 CFR 3406.13 - Content of a teaching proposal.

Code of Federal Regulations, 2014 CFR

2014-01-01

... project will strengthen higher education in the food and agricultural sciences in the United States; a... higher education in the food and agricultural sciences. (iv) Products and results. Explain the kinds of results and products expected and their impact on strengthening food and agricultural sciences higher...

PREFACE: Focus on Materials Nanoarchitectonics Focus on Materials Nanoarchitectonics

NASA Astrophysics Data System (ADS)

Aono, Masakazu

2011-08-01

On behalf of the International Center for Materials Nanoarchitectonics (MANA), I wish to express our gratitude for the publication of this special issue of Science and Technology of Advanced Materials (STAM), which highlights our recent research activities at MANA. In this preface, I would like to briefly describe the history and then outline the direction of research at MANA. In 2007, Japan's Ministry of Education, Culture, Sports, Science and Technology (MEXT) launched the World Premier International Research Center Initiative (WPI Program) to create several frontier research centers in Japan. The aim was to facilitate cutting-edge research by promoting the participation of leading scientists from around the world and by providing an attractive research environment. One of the six centers of the WPI Program is MANA, established at the National Institute for Materials Science (NIMS) in October 2007. The direction of research at MANA is symbolized by the term 'nanoarchitectonics', which is part of the name MANA. What is nanoarchitectonics? In the past quarter century, nanotechnology has made impressive advances and has become an important pillar in the development of new materials. However, to explore its full potential, nanotechnology needs to stay on the path of innovation. In particular, the conventional analytic view of nanotechnology must yield to a certain synthetic approach. This is conducive to creating new functions that can be exhibited by nanoscale structural units through mutual interactions, even though these functions are not present in the isolated units. We coined the term nanoarchitectonics (first used in the name of the 1st International Symposium on Nanoarchitectonics Using Suprainteractions (NASI-1), organized by the author and his colleagues at Tsukuba, Japan, in November 2000) to express this innovation of nanotechnology. More specifically, nanoarchitectonics is a technology system where the aim is arranging nanoscale structural units, which are a group of atoms or molecules or a nanoscale functional component, in an intended configuration that creates a novel functionality through mutual interactions among those units. Materials nanoarchitectonics targets two hierarchical classes of materials development: nanomaterial creation and nanosystem organization. MANA pursues the nanoarchitectonics concept described above on the basis of five key technologies: (i) controlled self-organization, (ii) chemical nanomanipulation, (iii) field-induced materials control, (iv) novel manipulations of atoms and molecules and (v) theoretical modeling and design. They are harnessed for scientific research organized into four fields: (i) nano-materials, (ii) nano-system, (iii) nano-green and (iv) nano-bio. In the nano-materials field, various novel nanoscale materials are created by utilizing unique synthetic techniques based on nanoarchitectonics, including soft-chemical, colloid and supramolecular processes. A typical example is the development of nanomaterials using soft-chemical nanosheet technology. In the nano-system field, researchers explore how nanoscale structural elements can produce novel functionalities through their mutual interactions and investigate how such novel functionalities can be materialized using nanoarchitectonics. One example is the development of a nanoscale system formed by atomic switches for the realization of inorganic neuromorphic circuits. The nano-green field develops new materials for electro- and photocatalysts, rechargeable batteries, solar and fuel cells, etc, which are necessary for the realization of a sustainable society. The nano-bio field sets its research direction towards material therapy and designs new materials for regenerative medicine. This special issue of STAM contains eleven papers that highlight the recent results obtained in the four research fields of MANA described above, although the main emphasis is placed on the nano-materials and nano-green fields. I hope that this special issue will introduce the research activities of MANA in the four years since its establishment and stimulate collaborations between MANA and other institutions around the world.

Survival Impact of Adjuvant Radiation Therapy in Masaoka Stage II to IV Thymomas: A Systematic Review and Meta-analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lim, Yu Jin; Kim, Eunji; Kim, Hak Jae, E-mail: khjae@snu.ac.kr

Purpose: To evaluate the survival impact of postoperative radiation therapy (PORT) in stage II to IV thymomas, using systematic review and meta-analysis. Methods and Materials: A database search was conducted with EMBASE, PubMed, Web of Science, Cochrane Library, and Ovid from inception to August 2015. Thymic carcinomas were excluded, and studies comparing overall survival (OS) with and without PORT in thymomas were included. The hazard ratios (HRs) of OS were extracted, and a random-effects model was used in the pooled analysis. Results: Seven retrospective series with a total of 1724 patients were included and analyzed. Almost all of the patients underwentmore » macroscopically complete resection, and thymoma histology was confirmed by the World Health Organization criteria. In the overall analysis of stage II to IV thymomas, OS was not altered with the receipt of PORT (HR 0.79, 95% confidence interval [CI] 0.58-1.08). Although PORT was not associated with survival difference in Masaoka stage II disease (HR 1.45, 95% CI 0.83-2.55), improved OS was observed with the addition of PORT in the discrete pooled analysis of stage III to IV (HR 0.63, 95% CI 0.40-0.99). Significant heterogeneity and publication bias were not found in the analyses. Conclusions: From the present meta-analysis of sole primary thymomas, we suggest the potential OS benefit of PORT in locally advanced tumors with macroscopically complete resection, but not in stage II disease. Further investigations with sufficient survival data are needed to establish detailed treatment indications.« less

The Possibility of a Contracting Science

DTIC Science & Technology

1986-12-01

SCIENCE 58 G. SUMMARY 59 IV. SOCIAL SCIENCE ISSUES 61 A. INTRODUCTION 61 B. EVOLUTION 62 C. BEHAVIORAL SCIENCE ISSUES 66 D. ACHIEVEMENTS OF SCIENCE 7 6 E...for this phase. The second phase involved the selection and examination of disciplines in the social science field that had gone 14 through or were...environmental abuses, promote health, education and scientific progress, assimilate 24 underprivileged groups into the mainstream of social life and so on

Liquid Metals as Plasma-facing Materials for Fusion Energy Systems: From Atoms to Tokamaks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stone, Howard A.; Koel, Bruce E.; Bernasek, Steven L.

The objective of our studies was to advance our fundamental understanding of liquid metals as plasma-facing materials for fusion energy systems, with a broad scope: from atoms to tokamaks. The flow of liquid metals offers solutions to significant problems of the plasma-facing materials for fusion energy systems. Candidate metals include lithium, tin, gallium, and their eutectic combinations. However, such liquid metal solutions can only be designed efficiently if a range of scientific and engineering issues are resolved that require advances in fundamental fluid dynamics, materials science and surface science. In our research we investigated a range of significant and timelymore » problems relevant to current and proposed engineering designs for fusion reactors, including high-heat flux configurations that are being considered by leading fusion energy groups world-wide. Using experimental and theoretical tools spanning atomistic to continuum descriptions of liquid metals, and bridging surface chemistry, wetting/dewetting and flow, our research has advanced the science and engineering of fusion energy materials and systems. Specifically, we developed a combined experimental and theoretical program to investigate flows of liquid metals in fusion-relevant geometries, including equilibrium and stability of thin-film flows, e.g. wetting and dewetting, effects of electromagnetic and thermocapillary fields on liquid metal thin-film flows, and how chemical interactions and the properties of the surface are influenced by impurities and in turn affect the surface wetting characteristics, the surface tension, and its gradients. Because high-heat flux configurations produce evaporation and sputtering, which forces rearrangement of the liquid, and any dewetting exposes the substrate to damage from the plasma, our studies addressed such evaporatively driven liquid flows and measured and simulated properties of the different bulk phases and material interfaces. The range of our studies included (i) quantum mechanical calculations that allow inclusion of many thousands of atoms for the characterization of the interface of liquid metals exposed to continuous bombardment by deuterium and tritium as expected in fusion, (ii) molecular dynamics studies of the phase behavior of liquid metals, which (a) utilize thermodynamic properties computed using our quantum mechanical calculations and (b) establish material and wetting properties of the liquid metals, including relevant eutectics, (iii) experimental investigations of the surface science of liquid metals, interacting both with the solid substrate as well as gaseous species, and (iv) fluid dynamical studies that incorporate the material and surface science results of (ii) and (iii) in order to characterize flow in capillary porous materials and the thin-film flow along curved boundaries, both of which are potentially major components of plasma-facing materials. The outcome of these integrated studies was new understanding that enables developing design rules useful for future developments of the plasma-facing components critical to the success of fusion energy systems.« less

Electronic and Thermal Properties of Puckered Orthorhombic Materials

NASA Astrophysics Data System (ADS)

Fei, Ruixiang

Puckered orthorhombic crystals, such as black phosphorus and group IV monochalcogenides, are attracting tremendous attention because of their new exotic properties, which are of great interests for fundamental science and novel applications. Unlike those well studied layered hexagonal materials such as graphene and transition metal dichalcogenides, the puckered orthorhombic crystals possess highly asymmetrical in-plane crystal structures. Understanding the unique properties emerginge from their low symmetries is an intriguing and useful process, which gives insight into experimental observation and sheds light on manipulating their properties. In this thesis, we study and predict various properties of orthorhombic materials by using appropriate theoretical techniques such as first-principles calculations, Monte-Carlo simulations, and k · p models. In the first part of the thesis, we deal with the anisotropic electric and thermal properties of a typical puckered orthorhombic crystal, black phosphorus. We first study the electric properties in monolayer and few-layer black phosphorus, where the unique, anisotropic electrical conductance is founded. Furthermore, we find that the anisotropy of the electrical conductance can be rotated by 90° through applying appropriate uniaxial or biaxial strain. Beyond electrical conductance, we, for the first time, predict that the thermal conductance of black phosphorus is also anisotropic and, particularly, the preferred conducting direction is perpendicular to the preferred electrical conducting direction. Within the reasonable estimation regime, the thermoelectric figure of merit (ZT) ultimately reaches 1 at room temperature using only moderate doping. The second part of this thesis focuses on the electronic polarization of non-centrosymmetric puckered materials-group IV monochalcogenide. We propose that monolayer group IV monochalcogenides are a new class of two-dimensional (2D) ferroelectric materials with spontaneous in-plane polarization. We have developed an effective mean-field method for Monte Carlo simulations to calculate the phase transition of ferroelectricity. Moreover, we point out that the piezoelectric effect of these monolayer materials is dramatically enhanced, and the piezoelectric coefficient is about two orders of magnitude larger than that of other 2D and bulk materials. In the last part of thesis, we study the topological phase transition in compressed black phosphorus. In this study, we use the k · p model to figure out the quantum phase transition of black phosphorus from a normal insulator to a Dirac nodal line semimetal. Via the low-energy effective Hamiltonian, a novel "pseudo-spin-orbit" coupling mechanism is proposed to explain such a phase transition in this material with the mirror symmetry. By first principles simulations, we predict that applying a moderate uniaxial or hydrostatic pressure (>0.6 GPa) on bulk or multilayer black phosphorus can diminish its bandgap and produce two-dimensional Dirac cones, which has been confirmed by recent experiments.

Post surgical pain management with poly(ortho esters).

PubMed

Barr, John; Woodburn, Kathryn W; Ng, Steven Y; Shen, Hui-Rong; Heller, Jorge

2002-10-16

Poly(ortho esters), POE, are synthetic bioerodible polymers that can be prepared as solid materials, or as viscous, injectable polymers. These materials have evolved through a number of families, and the latest member of this family, POE IV, is particularly well suited to drug delivery since latent acid is integrated into the polymer backbone, thereby, modulating surface erosion. POE IV predominantly undergoes surface erosion and is able to moderate drug release over periods from days to many months. One indication in which the POE IV polymer is currently being investigated is in sustained post-surgical pain management. The local anesthetic agent, mepivacaine, has been incorporated into a viscous, injectable POE IV and its potential to provide longer-acting anesthesia has been explored in non-clinical models.

Homeostatic Systems--Mechanisms for Survival. Science IV.

ERIC Educational Resources Information Center

Pfeiffer, Carl H.

The two student notebooks in this set provide the basic outline and assignments for the fourth and last year of a senior high school unified science program which builds on the technical third year course, Science IIIA (see SE 012 149). An introductory section considers the problems of survival inherent in living systems, matter-energy…

75 FR 20007 - Advisory Committee for Education and Human Resources; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

... Foundation's science, technology, engineering, and mathematics (STEM) education and human resources... Broadening Participation--Undergraduate Science, Technology, Engineering & Mathematics (STEM). III. Discussion of Graduate Education/Career Development Programs. IV. Collaborations with the Department of...

Staff | Computational Science | NREL

Science.gov Websites

develops and leads laboratory-wide efforts in high-performance computing and energy-efficient data centers Professional IV-High Perf Computing Jim.Albin@nrel.gov 303-275-4069 Ananthan, Shreyas Senior Scientist - High -Performance Algorithms and Modeling Shreyas.Ananthan@nrel.gov 303-275-4807 Bendl, Kurt IT Professional IV-High

HST/COS Far-ultraviolet Spectroscopic Analysis of U Geminorum Following a Wide Outburst

NASA Astrophysics Data System (ADS)

Godon, Patrick; Shara, Michael M.; Sion, Edward M.; Zurek, David

2017-12-01

We used the Cosmic Origins Spectrograph (COS) on the Hubble Space Telescope (HST) to obtain a series of four far-ultraviolet (FUV; 915-2148 Å) spectroscopic observations of the prototypical dwarf nova U Geminorum during its cooling following a two-week outburst. Our FUV spectral analysis of the data indicates that the white dwarf (WD) cools from a temperature of ˜41,500 K, 15 days after the peak of the outburst, to ˜36,250 K, 56 days after the peak of the outburst, assuming a massive WD (log(g) = 8.8) and a distance of 100.4 ± 3.7 pc. These results are self-consistent with a ˜1.1 M ⊙ WD with a 5000 ± 200 km radius. The spectra show absorption lines of H I, He II, C II III IV, N III IV, O VI, S IV, Si II III IV, Al III, Ar III, and Fe II, but no emission features. We find suprasolar abundances of nitrogen, confirming the anomalous high N/C ratio. The FUV light curve reveals a ±5% modulation with the orbital phase, showing dips near phases 0.25 and ˜0.75, where the spectra exhibit an increase in the depth of some absorption lines and in particular strong absorption lines from Si II, Al III, and Ar III. The phase dependence we observe is consistent with material overflowing the disk rim at the hot spot, reaching a maximum elevation near phase 0.75, falling back at smaller radii near phase 0.5 where it bounces off the disk surface, and again rising above the disk near phase ˜0.25. There is a large scatter in the absorption lines’ velocities, especially for the silicon lines, while the carbon lines seem to match more closely the orbital velocity of the WD. This indicates that many absorption lines are affected by—or form in—the overflowing stream material veiling the WD, making the analysis of the WD spectra more difficult. Based on observations made with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by AURA, Inc., under NASA contract NAS 5-26555.

PREFACE: International Symposium on Vacuum Science & Technology and its Application for Accelerators (IVS 2012)

NASA Astrophysics Data System (ADS)

Pandit, V. S.; Pal, Gautam

2012-11-01

The Indian Vacuum Society (IVS) was established in 1970 to promote vacuum science and technology in academic, industrial and R&D institutions in India. IVS is a member society of the International Union for Vacuum Science, Technique and Applications (IUVSTA). It has organized International and national symposia, short term courses and workshops on different aspects of Vacuum Science and Technology at regular intervals. So far 27 National symposia, 4 International Symposia and 47 courses have been organized at various locations in India. There has been an active participation from R&D establishments, universities and Indian industries during all these events. In view of the current global situation and emerging trends in vacuum technology, the executive committee of the IVS suggested to us that we organize an International Symposium at the Variable Energy Cyclotron Centre, Kolkata from 15-17 February 2012. At the Variable Energy Cyclotron Centre we have a large number of high vacuum systems used in the K130 Cyclotron and K500 Superconducting Cyclotron. Also a large cryogenic system using LHe plant is in operation for cryopanels and a superconducting magnet for K-500 Cyclotron. The main areas covered at the symposium were the production and measurement of vacuums, leak detection, design and development of large vacuum systems, vacuum metallurgy, vacuum materials and the application of high vacuums in cyclotrons, LINACS and other accelerators. This symposium provided an opportunity for interaction between active researchers and technologists and allowed them to review the current situation, report recent experimental results, share the available expertise and consider the future R&D efforts needed in this area. Keeping the industrial significance of vacuum technology in mind, an exhibition of the vacuum related equipment, accessories, products etc by various suppliers and manufactures was organized alongside the symposium. Participation by a large number of exhibitors clearly indicates that industry has advanced quite significantly. During the symposium, the Indian Vacuum Society honoured two distinguished personalities for their remarkable and significant contributions to the field of vacuum science and development of technology in the country. Awards were presented for both oral and poster papers during the symposium. A committee evaluated the scientific content and clarity of presentation of contributed papers. We believe that deliberations and discussions at the symposium will help gain a better understanding of the complicated and involved technology of vacuum science and be of benefit to scientists and technologists. Subimal Saha Convener Gautam Pal Co-Convener V S Pandit Secretary Surajit Pal Treasurer Conference photograph International Advisory Committee National Advisory Committee S BanerjeeDAE/IndiaR K Bhandari (Chairman)VECC Rockett AngusAVS/USAD L BandyopadhyayIVS A V Dadve CdrPfeiffer Vac /IndiaS B BhattIPR M Barma TIFR/IndiaK G BhushanBARC R K BhandariVECC/IndiaAlok ChakrabartiVECC R C BudhaniNPL, IndiaD P ChakravartyBARC Shekhar ChanderCEERI/IndiaTushar DesaiMumbai Univ S C ChetalIGCAR/IndiaR DeyVECC K L ChopraIIT Delhi/IndiaS C GadkariBARC Christian DayKIT/GermanyS K GuptaIUVSTA/India Kraemer DieterFAIR/GermanyShrikrishna GuptaBARC L M GantayatBARC/IndiaRajendra JatharAgilent Technologies R B GroverDAE, BARC/IndiaS N JoshiCEERI P D Gupta RRCAT/IndiaD KanjilalIUAC Szajman JakubVSA/AustraliaC MallikVECC R N JayarajNFC/IndiaS G MarkandeyaBRNS S KailasBARC/IndiaK C MittalBARC P K KawIPR/IndiaS NagarjunHHV Bangalore Lalit KumarMTRDC/IndiaK G M NairIGCAR Jean Larour Ecole/FranceGautam Pal (Co-convener)VECC Marminga LiaTRIUMF/CanadaSurajit Pal (Treasurer)VECC Shekhar MishraFermilab/USA V S Pandit (Secretary)VECC Ganapatirao MyneniJlab/USaR G PillayTIFR S V NarasaiahHHV/IndiaMohan PradeepNPL K RadhakrishnanISRO/IndiaY Ranga RaoVac Techniques A S Raja RaoIVS/IndiaR RanganathanSINP T RamasamiDST/IndiaSubimal Saha (Convener)VECC A K RayBARC/IndiaT K Saha BARC R Reid IUVSTA/UKVikrant SanglikarEdwards India Amit Roy IUAC/IndiaD SarkarVECC Milan SanyalSINP/IndiaY C SaxenaIPR V K SaraswantDRDO/IndiaS K ShuklaRRCAT E SchamilogluUNM/USAGurnam SinghRRCAT R K SinhaBARC/IndiaP SinghBARC P StrubinCERN/SwitzerlandA K SinhaIUC-DAEF T OkanoVSJ/JapanS K ThakurVECC Local Organizing Committee Dr R K BhandariShri Subimal Saha ChairmanCo-chairman Scientific ProgrammeReception & Registration 1. Dr V S Pandit, Convener1. Shri C Mallik, Convener 2. Dr K C Mittal2. Shri P Y Nabhiraj 3. Shri S K Gupta3. Shri Manas Dutta 4. Shri Gautam Pal4. Kum Ranjini Menon 5. Dr Arup Bandyopadhyay5. Shri Malay Kanti Dey 6. Shri Anjan Duttagupta6. Shri Samit Bandyopadhyay 7. Shri Chinmay Nandi7. Miss. Swantana Kumari 8. Shri Anindya Roy8. Smt Sudeshna Seth 9. Shri R C Yadav9. Shri Anirban De Transport & AccommodationPublication 1. Shri N V S V Prasad, Convener1. Shri Subimal Saha, Convener 2. Shri S K Thakur2. Dr V S Pandit 3. Shri Sumantra Bhattacharyya3. Shri C D Dutta 4. Shri Debjit Gupta4. Dr Tapas Bandyopadhyay 5. Shri S R Gupta5. Dr Vaishali Naik 6. Shri Jayanta Sur6. Shri Anirban De 7. Shri Sujit SahaCatering Auditorium 1. Dr Arup Bandyopadhyay, Convener 1. Shri Gautam Pal, Convener2. Shri Asis Polley 2. Shri Tamal Bhattacharyya3. Shri S. Chattopadhayay 3. Shri Tanmay Das4. Shri Debjit Gupta 4. Smt. Seema Bhattacharyya, SINP5. Shri Tanmay Das 5. Shri Susanta Chakroborti, SINP6. Shri R L Singh 6. Shri S C JenaFinance Exhibition/Souvenir1. Shri S Sambath, Convener 1. Shri R. Dey, Convener2. Dr Surajit Pal 2. Smt Seema Bhattacharyya, SINP3. Shri Asis Dey 3. Shri S K Thakur4. Shri V K Khare 4. Shri N DuttaCultural 5. Shri S K Pati1. Dr Alok Chakrabarti, Convener 6. Shri Yashwant Kumar2. Dr Vaishali Naik Website3. Shri Dirtha Sanyal 1. Shri Tapas Samanta, Convener4. Shri Suman Guha 2. Dr Surajit Pal 3. Shri Gaurav Saxena Indian Vacuum Society The Indian Vacuum Society (IVS) was established in 1970. It has over 900 members including many from Industry and R&D Institutions spread over the country. The society has an active chapter at Kolkata. The society was formed with the main aim to promote, encourage and develop the growth of Vacuum Science, Techniques and Applications in the country. In order to achieve this aim it has been conducting a number of short term courses at graduate and technician levels on vacuum science and technology on topics ranging from low vacuum to ultrahigh vacuum. So far it has conducted 47 such courses in different parts of the country and imparted training to more than 1500 people in the field. Some of these courses were in-plant training courses conducted on the premises of the establishment and designed to take care of the special needs of the establishment. Recently such a course was conducted at the Nuclear Fuel Complex, Hyderabad and Fundamentals of Vacuum Technology in general and Large Vacuum Furnaces, Vacuum Metallurgy in particular were the themes of the workshop. IVS also regularly conducts national and international seminars and symposia on vacuum science and technology with special emphasis on themes related to applications of vacuum. A large number of delegates from all over India take part in the deliberations of such seminars and symposia and present their work. IVS also arranges technical visits to different industries and research institutes. The society also helped in the UNESCO sponsored post-graduate level courses in vacuum science, technology and applications conducted by Mumbai University. IVS extended its support in standardizing many of the vacuum instruments and played a vital role in helping to set up a Regional Testing Centre along with BARC. As part of the development of vacuum education, the society arranges the participation of expert members on the subject to deliver lectures and take part in devising courses in the universities. IVS has published the 'Bulletin of Indian Vacuum Society' quarterly since its inception, in which articles on Vacuum and related topics are published. NIRVAT, news, announcements, and reports are the other features of the Bulletin. The articles in the Bulletin are internationally abstracted. The Bulletin is distributed free to all members of the society. The society also publishes the proceedings of National, International Symposia/Seminars, manuals, lecture notes etc. It has published 'Vacuum Directory' containing very useful information on vacuum technology and it is in the process of updating this. The IVS has also set up its own website (http://www.ivsnet.org) in January 2002. The website contains information about IVS, lists of EC members, events and news, abstracts of articles published in the Bulletin of Indian Vacuum Society, utilities, technical data, announcements, reports, membership and other forms including advertisements. Our Society is a member society of the International Union of Vacuum Science, Techniques and Applications (IUVSTA) and many IVS members are nominated in its various committees since 1970. In 1983, IVS conducted an International Symposium on Vacuum Technology and Nuclear Applications in BARC, Mumbai under the sponsorship of IUVSTA. In 1987, IVS arranged, the Triennial International Conference on Thin Films in New Delhi, where more than 200 foreign delegates participated. IVS also hosted the IUVSTA Executive Council Meeting along with the conference. The society organized yet again an International Conference on Vacuum Science and Technology (IVS-2007) during 28-30 November 2007 at TIFR, Colaba Camups, Mumbai. IVS organizes the prestigious Professor Balakrishnan Memorial Lecture in memory of its founder vice-president. Leading scientists in the field from India and abroad are invited to deliver the talk. So far 24 lectures have been held in this series. IVS has instituted the 'IVS- Professor D Y Phadke Memorial Prize' in memory of our founder President the late Professor D Y Phadke in the University of Mumbai. The prize is given every year to the top ranker in the MSc (Physics) examination conducted by the Mumbai University. IVS Kolkata Chapter has established the Dr A S Divatia Memorial Trust with the objective to organize the Dr A S Divatia Memorial Lecture and a seminar once a year and to set up a vacuum testing and calibration facility. IVS has instituted an award in memory of late Shri C. Ambasankaran, its past president and pioneer of vacuum technology in India. This award is given to one of the best papers presented in the national symposium conducted by IVS. One more best Poster award 'Smt Shakuntalabai Vyawahare Memorial Prize' is established from the donation given by Shri. Mohan R. Vyawahare, a life member, in memory of his mother. Recently, The IVS has decided to offer financial support to cover travel, registration fees and accommodation charges for a few selected students and participants (preferably IVS life members) for attending conferences in the country. Shrikrishna Gupta Gen. Secretary, IVS

Evaluation Report of the Busby School Title IV Program.

ERIC Educational Resources Information Center

Streiff, Paul R.

In the 1976-77 school year, the Title IV Program included 11 components: continuation of the Parent Advisory Committee; sponsorship of 4 community/school feasts centered around Title IV concerns; employment of classroom aides; development of cultural instructional objectives and materials; elementary school counselor to help meet the most serious…

Engaging local industry in the development of basic research infrastructure and instrumentation – The case of HIE-ISOLDE and ESS Scandinavia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fahlander, Claes, E-mail: claes.fahlander@nuclear.lu.se

Two world-class research facilities, the European Spallation Source, ESS, and the light-source facility MAX-IV, are being built in southern Sweden. They will primarily, when completed, be used for research in the fields of material sciences, life sciences, medicine and pharmacology. Their construction and the operation and maintenance of them for many years will create new business opportunities for companies in Europe in general and in Sweden, Denmark and Norway in particular in many different sectors. A project, CATE, Cluster for Accelerator Technology, was set up with the aim to strengthen the skills of companies in the Öresund-Kattegat-Skagerrak region in Scandinaviamore » in the field of accelerator technology such that they will become competitive and be able to take advantage of the potential of these two research facilities. CATE was strategically important and has helped to create partnerships between companies and new business opportunities in the region.« less

Structural and electronic properties of CdS/ZnS core/shell nanowires: A first-principles study

NASA Astrophysics Data System (ADS)

Kim, Hyo Seok; Kim, Yong-Hoon

2015-03-01

Carrying out density functional theory (DFT) calculation, we studied the relative effects of quantum confinement and strain on the electronic structures of II-IV semiconductor compounds with a large lattice-mismatch, CdS and ZnS, in the core/shell nanowire geometry. We considered different core radii and shell thickness of the CdS/ZnS core/shell nanowire, different surface facets, and various defects in the core/shell interface and surface regions. To properly describe the band level alignment at the core/shell boundary, we adopted the self-interaction correction (SIC)-DFT scheme. Implications of our findings in the context of device applications will be also discussed. This work was supported by the Basic Science Research Grant (No. 2012R1A1A2044793), Global Frontier Program (No. 2013-073298), and Nano-Material Technology Development Program (2012M3A7B4049888) of the National Research Foundation funded by the Ministry of Education, Science and Technology of Korea. Corresponding author

Engaging local industry in the development of basic research infrastructure and instrumentation - The case of HIE-ISOLDE and ESS Scandinavia

NASA Astrophysics Data System (ADS)

Fahlander, Claes

2016-07-01

Two world-class research facilities, the European Spallation Source, ESS, and the light-source facility MAX-IV, are being built in southern Sweden. They will primarily, when completed, be used for research in the fields of material sciences, life sciences, medicine and pharmacology. Their construction and the operation and maintenance of them for many years will create new business opportunities for companies in Europe in general and in Sweden, Denmark and Norway in particular in many different sectors. A project, CATE, Cluster for Accelerator Technology, was set up with the aim to strengthen the skills of companies in the Öresund-Kattegat-Skagerrak region in Scandinavia in the field of accelerator technology such that they will become competitive and be able to take advantage of the potential of these two research facilities. CATE was strategically important and has helped to create partnerships between companies and new business opportunities in the region.

Evaluation of Different Disinfactants on Dimensional Accuracy and Surface Quality of Type IV Gypsum Casts Retrieved from Elastomeric Impression Materials.

PubMed

Pal, P K; Kamble, Suresh S; Chaurasia, Ranjitkumar Rampratap; Chaurasia, Vishwajit Rampratap; Tiwari, Samarth; Bansal, Deepak

2014-06-01

The present study was done to evaluate the dimensional stability and surface quality of Type IV gypsum casts retrieved from disinfected elastomeric impression materials. In an in vitro study contaminated impression material with known bacterial species was disinfected with disinfectants followed by culturing the swab sample to assess reduction in level of bacterial colony. Changes in surface detail reproduction of impression were assessed fallowing disinfection. All the three disinfectants used in the study produced a 100% reduction in colony forming units of the test organisms. All the three disinfectants produced complete disinfection, and didn't cause any deterioration in surface detail reproduction. How to cite the article: Pal PK, Kamble SS, Chaurasia RR, Chaurasia VR, Tiwari S, Bansal D. Evaluation of dimensional stability and surface quality of type IV gypsum casts retrieved from disinfected elastomeric impression materials. J Int Oral Health 2014;6(3):77-81.

Science as a Way of Knowing IV--Developmental Biology. Proceedings of the Annual Meeting (Nashville, TN, December 27-30, 1986).

ERIC Educational Resources Information Center

Moore, John A.; And Others

1987-01-01

This fourth volume of the Science as a Way of Knowing project contains 12 papers given at a conference in 1986 which was cosponsored by a variety of scientific and science education organizations. The presentations include: (1) "Science as a Way of Knowing--Developmental Biology" (John A. Moore); (2) "Embryonic Induction"…

NATIONAL COASTAL CONDITION REPORT IV | Science ...

EPA Pesticide Factsheets

The National Coastal Condition Report IV (NCCR IV) is the fourth in a series of environmental assessments of U.S. coastal waters and the Great Lakes. The report includes assessments of all the nation’s estuaries in the contiguous 48 states and Puerto Rico, south-eastern Alaska, Hawaii, the U.S. Virgin Islands, Guam, and American Samoa. The NCCR IV presents four main types of data: (1) coastal monitoring data, (2) coastal ocean/ offshore monitoring data, (3) offshore fisheries data, and (4) assessment and advisory data (new to NCCR IV). The NCCR IV relies heavily on coastal monitoring data from EPA’s National Coastal Assessment (NCA) to assess coastal condition by evaluating five indicators of condition—water quality, sediment quality, benthic community condition, coastal habitat loss, and fish tissue contaminants. To assess and report on the condition of the nation's coastal resources

[Crops: Classifying, Selecting, Harvesting, Grading, and Packing.] Student Materials. V.A. III. [IV-B-1 through IV-B-2; IV-C-1 through IV-C-2].

ERIC Educational Resources Information Center

Texas A and M Univ., College Station. Vocational Instructional Services.

Part of a series of eight student learning modules in vocational agriculture, this booklet deals with crop-related activities. The first section is on harvesting methods and equipment. The following portions address the handling, grading, and packing of crops; and the classification and selection of fruits, vegetables, and ornamental plants. There…

Conformational space annealing scheme in the inverse design of functional materials

NASA Astrophysics Data System (ADS)

Kim, Sunghyun; Lee, In-Ho; Lee, Jooyoung; Oh, Young Jun; Chang, Kee Joo

2015-03-01

Recently, the so-called inverse method has drawn much attention, in which specific electronic properties are initially assigned and target materials are subsequently searched. In this work, we develop a new scheme for the inverse design of functional materials, in which the conformational space annealing (CSA) algorithm for global optimization is combined with first-principles density functional calculations. To implement the CSA, we need a series of ingredients, (i) an objective function to minimize, (ii) a 'distance' measure between two conformations, (iii) a local enthalpy minimizer of a given conformation, (iv) ways to combine two parent conformations to generate a daughter one, (v) a special conformation update scheme, and (vi) an annealing method in the 'distance' parameter axis. We show the results of applications for searching for Si crystals with direct band gaps and the lowest-enthalpy phase of boron at a finite pressure and discuss the efficiency of the present scheme. This work is supported by the National Research Foundation of Korea (NRF) under Grant No. NRF-2005-0093845 and by Samsung Science and Technology Foundation under Grant No. SSTFBA1401-08.

Missouri River, Gavins Point Dam - Lewis and Clark Lake, Nebraska and South Dakota, Embankment Criteria and Performance Report.

DTIC Science & Technology

1982-05-01

FOUNDATION PREPARATION. All areas upon which embankment material were placed, plus at least a 10-foot contiguous strip, were cleared of all brush, trees ...feet below the ground surface. Thin surface layers containing sod, humus , and other undesirable material were stripped and wasted. Depressions were...section consisting of the thick IV on 15R berm section and the thinner IV on 411 upper main embankment section. The speci - fications allowed the material

14 CFR 1214.304 - Process.

Code of Federal Regulations, 2010 CFR

2010-01-01

... conducted at the Johnson Space Center by certified examiners approved by the Director, Life Sciences... examination will be conducted at Johnson Space Center by certified examiners approved by the Director, Life Sciences Division, NASA Headquarters). (iv) Submitting its recommendations for payload specialists through...

14 CFR § 1214.304 - Process.

Code of Federal Regulations, 2014 CFR

2014-01-01

... conducted at the Johnson Space Center by certified examiners approved by the Director, Life Sciences... examination will be conducted at Johnson Space Center by certified examiners approved by the Director, Life Sciences Division, NASA Headquarters). (iv) Submitting its recommendations for payload specialists through...

14 CFR 1214.304 - Process.

Code of Federal Regulations, 2013 CFR

2013-01-01

... conducted at the Johnson Space Center by certified examiners approved by the Director, Life Sciences... examination will be conducted at Johnson Space Center by certified examiners approved by the Director, Life Sciences Division, NASA Headquarters). (iv) Submitting its recommendations for payload specialists through...

14 CFR 1214.304 - Process.

Code of Federal Regulations, 2011 CFR

2011-01-01

... conducted at the Johnson Space Center by certified examiners approved by the Director, Life Sciences... examination will be conducted at Johnson Space Center by certified examiners approved by the Director, Life Sciences Division, NASA Headquarters). (iv) Submitting its recommendations for payload specialists through...

14 CFR 1214.304 - Process.

Code of Federal Regulations, 2012 CFR

2012-01-01

... conducted at the Johnson Space Center by certified examiners approved by the Director, Life Sciences... examination will be conducted at Johnson Space Center by certified examiners approved by the Director, Life Sciences Division, NASA Headquarters). (iv) Submitting its recommendations for payload specialists through...

Abdominal 64-MDCT for suspected appendicitis: the use of oral and IV contrast material versus IV contrast material only.

PubMed

Anderson, Stephan W; Soto, Jorge A; Lucey, Brian C; Ozonoff, Al; Jordan, Jacqueline D; Ratevosian, Jirair; Ulrich, Andrew S; Rathlev, Niels K; Mitchell, Patricia M; Rebholz, Casey; Feldman, James A; Rhea, James T

2009-11-01

The objective of our study was to compare the diagnostic accuracy of IV contrast-enhanced 64-MDCT with and without the use of oral contrast material in diagnosing appendicitis in patients with abdominal pain. We conducted a randomized trial of a convenience sample of adult patients presenting to an urban academic emergency department with acute nontraumatic abdominal pain and clinical suspicion of appendicitis, diverticulitis, or small-bowel obstruction. Patients were enrolled between 8 am and 11 pm when research assistants were present. Consenting subjects were randomized into one of two groups: Group 1 subjects underwent 64-MDCT performed with oral and IV contrast media and group 2 subjects underwent 64-MDCT performed solely with IV contrast material. Three expert radiologists independently reviewed the CT examinations, evaluating for the presence of appendicitis. Each radiologist interpreted 202 examinations, ensuring that each examination was interpreted by two radiologists. Individual reader performance and a combined interpretation performance of the two readers assigned to each case were calculated. In cases of disagreement, the third reader was asked to deliver a tiebreaker interpretation to be used to calculate the combined reader performance. Final outcome was based on operative, clinical, and follow-up data. We compared radiologic diagnoses with clinical outcomes to calculate the diagnostic accuracy of CT in both groups. Of the 303 patients enrolled, 151 patients (50%) were randomized to group 1 and the remaining 152 (50%) were randomized to group 2. The combined reader performance for the diagnosis of appendicitis in group 1 was a sensitivity of 100% (95% CI, 76.8-100%) and specificity of 97.1% (95% CI, 92.7-99.2%). The performance in group 2 was a sensitivity of 100% (73.5-100%) and specificity of 97.1% (92.9-99.2%). Patients presenting with nontraumatic abdominal pain imaged using 64-MDCT with isotropic reformations had similar characteristics for the diagnosis of appendicitis when IV contrast material alone was used and when oral and IV contrast media were used.

40 CFR Appendix IV to Part 261 - Reserved

Code of Federal Regulations, 2010 CFR

2010-07-01

... AND LISTING OF HAZARDOUS WASTE Financial Requirements for Management of Excluded Hazardous Secondary Materials Wording of the instruments. Appendix IV to Part 261 [Reserved for Radioactive Waste Test Methods] ...

Collaborative Group Learning Approaches for Teaching Comparative Planetology

NASA Astrophysics Data System (ADS)

Slater, S. J.; Slater, T. F.

2013-12-01

Modern science education reform documents propose that the teaching of contemporary students should focus on doing science, rather than simply memorizing science. Duschl, Schweingruber, and Shouse (2007) eloquently argue for four science proficiencies for students. Students should: (i) Know, use, and interpret scientific explanations of the natural world; (ii) Generate and evaluate scientific evidence and explanations; (iii) Understand the nature and development of scientific knowledge; and (iv) Participate productively in scientific practices and discourse. In response, scholars with the CAPER Center for Astronomy & Physics Education Research are creating and field-tested two separate instructional approaches. The first of these is a series of computer-mediated, inquiry learning experiences for non-science majoring undergraduates based upon an inquiry-oriented teaching approach framed by the notions of backwards faded-scaffolding as an overarching theme for instruction. Backwards faded-scaffolding is a strategy where the conventional and rigidly linear scientific method is turned on its head and students are first taught how to create conclusions based on evidence, then how experimental design creates evidence, and only at the end introduces students to the most challenging part of inquiry - inventing scientifically appropriate questions. Planetary science databases and virtual environments used by students to conduct scientific investigations include the NASA and JPL Solar System Simulator and Eyes on the Solar System as well as the USGS Moon and Mars Global GIS Viewers. The second of these is known widely as a Lecture-Tutorial approach. Lecture-Tutorials are self-contained, collaborative group activities. The materials are designed specifically to be easily integrated into the lecture course and directly address the needs of busy and heavily-loaded teaching faculty for effective, student-centered, classroom-ready materials that do not require a drastic course revision for implementation. Students are asked to reason about difficult concepts, while working in pairs, and to discuss their ideas openly. Extensive evaluation results consistently suggest that both the backwards faded-scaffolding and the Lecture-Tutorials approaches are successful at engaging students in self-directed scientific discourse as measured by the Views on Scientific Inquiry (VOSI) as well as increasing their knowledge of science as measured by the Test Of Atronomy STandards (TOAST).

Towards a comprehensive and realistic risk evaluation of engineered nanomaterials in the urban water system

NASA Astrophysics Data System (ADS)

Duester, Lars; Burkhardt, Michael; Gutleb, Arno; Kaegi, Ralf; Macken, Ailbhe; Meermann, Björn; von der Kammer, Frank

2014-06-01

The European COoperation in Science and Technology (COST) Action ES1205 on the transfer of Engineered Nano materials from wastewater Treatment and stormwatEr to Rivers (ENTER) aims to create and to maintain a trans European network among scientists. This perspective article delivers a brief overview on the status quo at the beginning of the project by addressing the following aspects on engineered nano materials (ENMs) in the urban systems: i) ENMs that need to be considered on a European level; ii) uncertainties on production-volume estimations; iii) fate of selected ENMs during waste water transport and treatment; iv) analytical strategies for ENM analysis; v) ecotoxicity of ENMs, and vi) future needs. These six step stones deliver the derivation of the position of the ES1205 network at the beginning of the projects runtime, by defining six fundamental aspects that should be considered in future discussions on risk evaluation of ENMs in urban water systems.

Cleaning Puparia for Forensic Analysis.

PubMed

Higley, Leon G; Brosius, Tierney R; Reinhard, Karl J; Carter, David

2016-09-01

We tested procedures for removing adipocere from insect samples to allow identification. An acceptable procedure was determined: (i) Samples were sorted in petri dishes with 75% alcohol to remove any larvae, adult insects, or other soft-bodied material. (ii) Samples of up to 24 puparia were placed in a vial with 15 mL of 95% acetone, capped, and vortexed for a total of 30-90 sec in 10- to 15-sec bursts. This step removed large masses of adipocere or soil from specimen. (iii) Specimens were removed from acetone and placed in a vial of 15 mL of 2% potassium hydroxide (KOH) and vortexed in 10- to 15-sec bursts until all puparia appeared clean (with our samples this required a total of 60-120 sec). (iv) Specimens were removed from the 2% KOH, placed in 75% ethanol, and examined microscopically. (v) Material was stored in 75% ethanol for identification and long-term preservation. © 2016 American Academy of Forensic Sciences.

Thermoelectric materials and devices

NASA Technical Reports Server (NTRS)

Park, Yeonjoon (Inventor); Choi, Sang H. (Inventor); King, Glen C. (Inventor); Elliott, James R. (Inventor); Talcott, Noel A. (Inventor)

2011-01-01

New thermoelectric materials comprise highly [111]-oriented twinned group IV alloys on the basal plane of trigonal substrates, which exhibit a high thermoelectric figure of merit and good material performance, and devices made with these materials.

Weigh the pros and cons to ovarian reserve before stripping ovarian endometriomas prior to IVF/ICSI: A meta-analysis.

PubMed

Tao, Xin; Chen, Lei; Ge, Shuqi; Cai, Lisi

2017-01-01

To explore the effects of conservative surgery for endometriomas on ovarian responsiveness during assisted reproductive technology (ART) and provide reproductive and gynecological doctors with a more reliable reference program for the treatment of endometriomas. A literature search was performed by searching the PubMed, Embase, Cochrane Library, Web of Science and Science Direct databases. Studies with inter- and intra-patient comparisons of ovarian responses and oocyte quality between operated and unoperated ovaries and that met the inclusion criteria were retrieved, and the data from the outcome measures were extracted and pooled for this meta-analysis. Twenty-one published studies (2649 ART cycles) were included. The total amount of gonadotropin (Gn) used (inverse variance (IV):0.48; 95% confidence interval (CI): [0.13, 1.82], P = 0.0007) was significantly increased in the women with endometriomas who had a history of cystectomy. The estrogen (E) level on the day of hCG administration (IV: -0.29; 95% CI: [-0.41, -0.17], P<0.00001), the number of mature or dominant follicles (IV: -1.17; 95% CI: [-1.51, -0.82], P<0.00001) and the total number of oocytes retrieved (IV: -1.78; 95% CI: [-2.38, -1.17], P<0.00001) were significantly decreased in the women with endometriomas who had a history of cystectomy. The duration of stimulation (IV: 0.02; 95% CI: [-0.09, 0.13], P = 0.77), the total number of formed embryos (IV: -0.06; 95% CI: [-0.17, 0.04], P = 0.25), the pregnancy rate(IV:0.98;95%CI[0.82,1.18], P = 0.83) and the live birth rate(IV:0.93;95%CI[0.70,1.23], P = 0.61)were not statistically different between the two groups. Similar intra-patient results were found in the number of mature or dominant follicles (IV: -0.88; 95% CI: [-1.25, -0.52], P<0.00001) and the total number of oocytes retrieved (IV: -3.48; 95% CI: [-4.77, -2.19], P<0.00001). ART might be a better therapeutic method for ovarian endometrioma-related infertility than cystectomy.

Spectrophotometric Properties of E+A Galaxies in SDSS-IV MaNGA

NASA Astrophysics Data System (ADS)

Marinelli, Mariarosa; Dudley, Raymond; Edwards, Kay; Gonzalez, Andrea; Johnson, Amalya; Kerrison, Nicole; Melchert, Nancy; Ojanen, Winonah; Weaver, Olivia; Liu, Charles; SDSS-IV MaNGA

2018-01-01

Quenched post-starburst galaxies, or E+A galaxies, represent a unique and informative phase in the evolution of galaxies. We used a qualitative rubric-based methodology, informed by the literature, to manually select galaxies from the SDSS-IV IFU survey Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) using the single-fiber spectra from the Sloan Digital Sky Survey Data Release 8. Of the 2,812 galaxies observed so far in MaNGA, we found 39 galaxies meeting our criteria for E+A classification. Spectral energy distributions of these 39 galaxies from the far-UV to the mid-infrared demonstrate a heterogeneity in our sample emerging in the infrared, indicating many distinct paths to visually similar optical spectra. We used SDSS-IV MaNGA Pipe3D data products to analyze stellar population ages, and found that 34 galaxies exhibited stellar populations that were older at 1 effective radius than at the center of the galaxy. Given that our sample was manually chosen based on E+A markers in the single-fiber spectra aimed at the center of each galaxy, our E+A galaxies may have only experienced their significant starbursts in the central region, with a disk of quenched or quenching material further outward. This work was supported by grants AST-1460860 from the National Science Foundation and SDSS FAST/SSP-483 from the Alfred P. Sloan Foundation to the CUNY College of Staten Island.

Gen IV Materials Handbook Beta Release for Structural and Functional Evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Weiju; Luttrell, Claire

2006-09-12

Development of the Gen IV Materials Handbook is briefly summarized up to date. Current status of the Handbook website construction is described. The developed Handbook components and access control of the beta version are discussed for the present evaluation release. Detailed instructions and examples are given to provide guidance for evaluators to browse the constructed parts and use all the currently developed functionalities of the Handbook in evaluation.

Criteria for extending the operation periods of thermoelectric converters based on IV-VI compounds

NASA Astrophysics Data System (ADS)

Sadia, Yatir; Ohaion-Raz, Tsion; Ben-Yehuda, Ohad; Korngold, Meidad; Gelbstein, Yaniv

2016-09-01

The recent energy demands affected by the dilution of conventional energy resources and the growing awareness of environmental considerations, had positioned the research of renewable energy conversion methods in general and of thermoelectric direct conversion of thermal into electrical energies in particular, in the forefront of the currently active applicative sciences. IV-VI thermoelectric compounds (e.g. GeTe, PbTe and SnTe) and their alloys comprise some of the most efficient thermoelectric compositions ever reported. Yet a proper utilization of such materials in practical thermoelectric devices, still requires an overcoming the so-called technological "valley of death", including among others, transport properties' degradation, due to sublimation of volatile Te rich species, while being subjected to elevated temperatures for long periods of time. In an attempt to establish practical operation criteria for extending the operation periods of such thermoelectric converters, it is currently shown based on thermal gravimetric and metallurgical considerations that such harmful sublimation can be practically bridged over by limiting the maximal operating temperatures to the 410-430 °C range for GeTe rich alloys and to 510-530 °C for PbTe and SnTe rich alloys, depending of the thermoelectric leg's diameter.

The Law and Internal Armed Conflict: Past, Present and Future

DTIC Science & Technology

1999-04-01

monuments and works of art science ; (e) plunder of public or private property. 384 The article states that these listed violations are not the only...law of armed conflict; (iv) Intentionally directing attacks against buildings dedicated to religion, education, art , science or charitable purposes

Delayed Enhancement of Ascites After IV Contrast Material Administration at CT: Time Course and Clinical Correlation

PubMed Central

Benedetti, Nancy; Aslam, Rizwan; Wang, Zhen J.; Joe, Bonnie N.; Fu, Yanjun; Yee, Judy; Yeh, Benjamin M.

2010-01-01

OBJECTIVE The objective of our study was to determine the prevalence and clinical predictors of delayed contrast enhancement of ascites. MATERIALS AND METHODS In this retrospective study, 132 consecutive patients with ascites who underwent repeated abdominopelvic CT examinations performed within 7 days of each other were identified. These patients included 112 patients who received and 20 who did not receive IV contrast material at the initial CT examination. For each examination, we recorded the CT attenuation of the ascites. For the follow-up scan, the presence of delayed enhancement of ascites was defined as an increase in CT attenuation > 10 HU over baseline. The Fisher’s exact test, unpaired Student’s t test, and logistic regression were used to determine predictors of delayed enhancement of ascites. RESULTS A threshold increase in the attenuation of ascites by > 10 HU or more between the initial and follow-up CT examinations occurred only when IV contrast material was given with the initial examination. The increased attenuation was due to delayed contrast enhancement of ascites and occurred in 15 of the 112 patients (13%). Of the 16 patients scanned less than 1 day apart, 10 (63%) showed delayed enhancement of ascites. Delayed enhancement was not observed 3 or more days after IV contrast material administration. For each 1 mg/dL increase in serum creatinine level, the likelihood of delayed enhancement of ascites increased (odds ratio, 2.02; 95% CI, 1.11–3.69). Multivariate logistic regression showed that a short time interval between examinations (p < 0.001), increased serum creatinine level (p < 0.001), and presence of loculated ascites (p = < 0.01) were independent predictors of the magnitude of delayed enhancement of ascites. CONCLUSION Delayed contrast enhancement of ascites occurs commonly after recent prior IV contrast material administration and should not be mistaken for hemoperitoneum or proteinaceous fluid such as pus. PMID:19696286

40 CFR 211.210-2 - Labeling requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... constant); (ii) Ear cup volume or shape; (iii) Mounting of ear cup on head band; (iv) Ear cushion; (v... tension (spring constant); (ii) Mounting of plug on head band; (iii) Shape of plug; (iv) Material...

Criteria for choosing an intravenous infusion line intended for multidrug infusion in anaesthesia and intensive care units.

PubMed

Maiguy-Foinard, Aurélie; Genay, Stéphanie; Lannoy, Damien; Barthélémy, Christine; Lebuffe, Gilles; Debaene, Bertrand; Odou, Pascal; Décaudin, Bertrand

2017-02-01

The aims are to identify critical parameters influencing the drug mass flow rate of infusion delivery to patients during multidrug infusion and to discuss their clinical relevance. A review of literature was conducted in January 2016 using Medline, Google Scholar, ScienceDirect, Web of Science and Scopus online databases. References relating to the accuracy of fluid delivery via gravity-flow intravenous (IV) infusion systems and positive displacement pumps, components of IV administration sets, causes of flow rate variability, potential complications due to flow rate variability, IV therapies especially at low flow rates and drug compatibilities were considered relevant. Several parameters impact the delivery of drugs and fluids by IV infusion. Among them are the components of infusion systems that particularly influence the flow rate of medications and fluids being delivered. By their conception, they may generate significant start-up delays and flow rate variability. Performing multidrug infusion requires taking into account two main points: the common dead volume of drugs delivered simultaneously with potential consequences on the accuracy and amount of drug delivery and the prevention of drug incompatibilities and their clinical effects. To prevent the potentially serious effects of flow rate variability on patients, clinicians should receive instruction on the fluid dynamics of an IV administration set and so be able to take steps to minimise flow rate changes during IV therapy. Copyright © 2016 Société française d’anesthésie et de réanimation (Sfar). Published by Elsevier Masson SAS. All rights reserved.

Study of uranium oxidation states in geological material.

PubMed

Pidchenko, I; Salminen-Paatero, S; Rothe, J; Suksi, J

2013-10-01

A wet chemical method to determine uranium (U) oxidation states in geological material has been developed and tested. The problem faced in oxidation state determinations with wet chemical methods is that U redox state may change when extracted from the sample material, thereby leading to erroneous results. In order to quantify and monitor U redox behavior during the acidic extraction in the procedure, an analysis of added isotopic redox tracers, (236)U(VI) and (232)U(IV), and of variations in natural uranium isotope ratio ((234)U/(238)U) of indigenous U(IV) and U(VI) fractions was performed. Two sample materials with varying redox activity, U bearing rock and U-rich clayey lignite sediment, were used for the tests. The Fe(II)/Fe(III) redox-pair of the mineral phases was postulated as a potentially disturbing redox agent. The impact of Fe(III) on U was studied by reducing Fe(III) with ascorbic acid, which was added to the extraction solution. We observed that ascorbic acid protected most of the U from oxidation. The measured (234)U/(238)U ratio in U(IV) and U(VI) fractions in the sediment samples provided a unique tool to quantify U oxidation caused by Fe(III). Annealing (sample heating) to temperatures above 500 °C was supposed to heal ionizing radiation induced defects in the material that can disturb U redox state during extraction. Good agreement between two independent methods was obtained for DL-1a material: an average 38% of U(IV) determined by redox tracer corrected wet chemistry and 45% for XANES. Copyright © 2013 Elsevier Ltd. All rights reserved.

Law, evolution and the brain: applications and open questions.

PubMed Central

Jones, Owen D

2004-01-01

This paper discusses several issues at the intersection of law and brain science. It focuses principally on ways in which an improved understanding of how evolutionary processes affect brain function and human behaviour may improve law's ability to regulate behaviour. It explores sample uses of such 'evolutionary analysis in law' and also raises questions about how that analysis might be improved in the future. Among the discussed uses are: (i) clarifying cost-benefit analyses; (ii) providing theoretical foundation and potential predictive power; (iii) assessing comparative effectiveness of legal strategies; and (iv) revealing deep patterns in legal architecture. Throughout, the paper emphasizes the extent to which effective law requires: (i) building effective behavioural models; (ii) integrating life-science perspectives with social-science perspectives; (iii) considering the effects of brain biology on behaviours that law seeks to regulate; and (iv) examining the effects of evolutionary processes on brain design. PMID:15590611

Law, evolution and the brain: applications and open questions.

PubMed

Jones, Owen D

2004-11-29

This paper discusses several issues at the intersection of law and brain science. It focuses principally on ways in which an improved understanding of how evolutionary processes affect brain function and human behaviour may improve law's ability to regulate behaviour. It explores sample uses of such 'evolutionary analysis in law' and also raises questions about how that analysis might be improved in the future. Among the discussed uses are: (i) clarifying cost-benefit analyses; (ii) providing theoretical foundation and potential predictive power; (iii) assessing comparative effectiveness of legal strategies; and (iv) revealing deep patterns in legal architecture. Throughout, the paper emphasizes the extent to which effective law requires: (i) building effective behavioural models; (ii) integrating life-science perspectives with social-science perspectives; (iii) considering the effects of brain biology on behaviours that law seeks to regulate; and (iv) examining the effects of evolutionary processes on brain design.

Evidence of redshifts in the average solar line profiles of C IV and Si IV from OSO-8 observations

NASA Technical Reports Server (NTRS)

Roussel-Dupre, D.; Shine, R. A.

1982-01-01

Line profiles of C IV and Si V obtained by the Colorado spectrometer on OSO-8 are presented. It is shown that the mean profiles are redshifted with a magnitude varying from 6-20 km/s, and with a mean of 12 km/s. An apparent average downflow of material in the 50,000-100,000 K temperature range is measured. The redshifts are observed in the line center positions of spatially and temporally averaged profiles and are measured either relative to chromospheric Si I lines or from a comparison of sun center and limb profiles. The observations of 6-20 km/s redshifts place constraints on the mechanisms that dominate EUV line emission since it requires a strong weighting of the emission in regions of downward moving material, and since there is little evidence for corresponding upward moving materials in these lines.

76 FR 59247 - Environmental Impact Considerations, Food Additives, and Generally Recognized As Safe Substances...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-26

..., II, IV-B 212 [deg]F, 30 min emulsion of high or low fat. 2. Aqueous, high or low free III, IV-A, VII....... do 120 [deg]F, 30 min oil or fat. \\1\\ Heptane extractant not to be used on wax-lined containers. \\2..., 2011. Susan Bernard, Acting Director, Office of Regulations, Policy and Social Sciences, Center for...

Awareness of basic life support among staff and students in a dental school.

PubMed

Reddy, Sahithi; Doshi, Dolar; Reddy, Padma; Kulkarni, Suhas; Reddy, Srikanth

2013-05-01

To assess and compare the knowledge of basic life support (BLS) among third, fourth and fifth (III, IV and V) year Bachelor of Dental Surgery (BDS) clinical students, dental interns, postgraduate students and Bachelor of Dental Surgery (BDS) and Master of Dental Surgery (MDS) faculty of Panineeya Institute of Dental Sciences and Hospital, Hyderabad, India. A BLS questionnaire consisting of 22 questions was used to assess the levels of III, IV and V years BDS clinical students, dental interns, postgraduate students and BDS and MDS faculty of Panineeya Institute of Dental Sciences and Hospital, Hyderabad, India. Statistical Package for Social Sciences software (SPSS version 12.0) was used to analyze the statistical data. The p<0.05 was considered statistically significant. A total of 338 respondents took part in the study. When gender comparison was done with correct knowledge responses, statistically significant differences were noted for Q6, Q9, Q12, Q13, Q15 and Q17. For age groups and educational qualifications, significant difference was observed for all questions. It was noted that III, IV and V year undergraduate clinical students and half of interns had adequate knowledge when compared to postgraduate students (6.9%), BDS tutors (0.00%) and MDS staff (10.7%). The study concludes that there is a significant lack of knowledge among postgraduates students BDS and MDS faculty, regarding BLS when compared to III, IV and V year's clinical BDS students and dental interns. This study emphasizes the need for all health care professionals to regularly update the knowledge and skills regarding BLS.

PREFACE: International Symposium on `Vacuum Science and Technology' (IVS 2007)

NASA Astrophysics Data System (ADS)

Mittal, K. C.; Gupta, S. K.

2008-03-01

The Indian Vacuum Society (established in 1970) has organized a symposium every alternate year on various aspects of vacuum science and technology. There has been considerable participation from R & D establishments, universities and Indian industry in this event. In view of the current global scenario and emerging trends in vacuum technology, this year, the executive committee of IVS felt it appropriate to organize an international symposium at Tata Institute of Fundamental Research, Colaba, Mumbai 400 005 from 29-30 November 2007. This symposium provided a forum for exchange of information among vacuum scientists, technologists and industrialists on recent advances made in the areas of large vacuum systems, vacuum production, its measurement and applications in industry, and material processing in vacuum. Vacuum science and technology has made vital contributions in high tech areas like space, high energy particle accelerators, large plasma systems, electronics, thin films, melting and refining of metals, extraction and processing of advanced materials etc. The main areas covered in the symposium were the production and measurement of vacuums, leak detection, large vacuum systems, vacuum metallurgy, vacuum materials and processing inclusive of applications of vacuum in industry. Large vacuum systems for high energy particle accelerators, plasma devices and light sources are of special significance for this symposium. Vacuum evaporation, hard coatings, thin films, joining techniques, sintering, melting and heat treatment, furnaces and thermo dynamics are also covered in this symposium. There were eighteen invited talks from the best experts in the respective fields and more than one hundred contributed papers. This fact itself indicates the interest that has been generated amongst the scientists, technologists and industrialists in this field. In view of the industrial significance of the vacuum technology, an exhibition of vacuum and vacuum processing related equipments, accessories, products etc by different manufacturers and suppliers has been organized at the venue of the symposium hall for the benefit of the participants. The interest shown by the exhibitors reveals that the industry has come of age and the advances that have taken place over the years is quite significant. During the symposium, the Indian Vacuum Society felicitated two distinguished personalities who have contributed significantly for the development of vacuum science and technology in the country. The C AMBASANKARAN memorial and Smt SHAKUNTALABAI VYAWAHARE memorial Awards were also conferred on the two best contributed papers. A committee constituted by the Symposium Organizing Committee evaluated the relevance, scientific content, and clarity of presentation to decide the award winning papers. It is hoped that the discussion generated by the delegates at the symposium will help in a better understanding vacuum science and technology. K C Mittal Convener S K Gupta Co Convener International Advisory Committee Kakodkar, Anil DAE/India, Chairman Badve, Cdr A.V.(IN Retd.) Pfeiffer Vac India Banerjee, S. BARC/India Bhandari, R.K. BRNS/India Chander, Shekhar CEERI/India Chopra, K.L. IIT Delhi/India Day, Chris ITER Grover, R.B DAE,BARC/India Jakub, Szajman VSA/ Australia Jayaraj, R.N. NFC/India Kamath, H.S. BARC/India Kaw, P.K. IPR/India Kobayashi, M. VSJ/Japan Kumar, Lalit MTRDC, India Kumar, Vikram NPL., India Langley, Robert AVS, USA Larour, Jean Ecole/France Mendonsa, R.H. Lawrence and Mayo Myneni, Ganapatirao Jlab/USA Narsaiah, S.V. HHV Padamsee, Hasan Cornell/USA Pillay, R.G. TIFR Raj, Baldev IGCAR/India Raju, P.T. IVS/India Ramasami, T. DST/India Ray, A.K. BARC/India Reid, RJ IUVSTA/UK Roy, Amit IUAC/india Sahni, V.C. RRCAT, BARC/India Schamiloglu, E. UNM/USA Shankara, K.N. VSSC,ISRO/India Sinha, Bikash VEC,SINP/India Strubin, P. CERN/Switzerland Local Organizing Committee Ray, A.K. BARC (Chairman) Kailas, S. BARC, (Co Chairman) Chakravarty, D.P. BARC Chandrachoodan, P.P. BRNS Desai, Tushar Mumbai Univ. Dhamija, Lokesh BOC Edwards Dixit, Anand New Poona Ind. Gadkari, S.C. BARC Gantayet, L.M BARC Gupta, A.C. NPL Gupta, S.K. BARC (Co Convener) Handu, V.K. BARC Jathar, Rajendra Varian Joshi, S.N. CEERI Korgaonkar, A.V. IVS Kotaiah, S. CAT Kumar, Vijay BARC Matkar, A.W. BARC Mittal, K.C. BARC (Convener) Nema, P.K. BRNS Pandit, V.S. VEC Puranik, S.G. Ashwani Enterprises Puri, R.R. BARC Ranga Rao, Y. Vac. Techniques Sabharwal, Rajat Alcatel Sakhamuri, Prashant HHV Bangalore Sanyal, T. NFC Sarkar, S.K. TIFR Sarma, K.R. Atomic Vacuum Saxena, Y.C. IPR Sharma, B.P. BARC Shukla, S.K. RRCAT Singh, R.P. BARC Suri, A.K. BARC Suthar ,R.L. BARC Venugopa,l V. BARC Vyavahare, Mohan Ultimate Technologies Yakhmi, J.V. BARC

Advanced Photon Source Upgrade Project - Materials

ScienceCinema

Gibbson, Murray

2018-03-02

An upgrade to Advanced Photon Source announced by DOE - http://go.usa.gov/ivZ -- will help scientists break through bottlenecks in materials design in order to develop materials with desirable functions.

Biokinetics and effects of titania nano-material after inhalation and i.v. injection

NASA Astrophysics Data System (ADS)

Landsiedel, Robert; Fabian, Eric; Ma-Hock, Lan; Wiench, Karin; van Ravenzwaay, Bennard

2009-05-01

Within NanoSafe2 we developed a special inhalation model to investigate deposition of inhaled particles in the lung and the further distribution in the body after. Concurrently, the effects of the inhaled materials in the lung were examined. The results for nano-Titania were compared to results from inhalation studies with micron-sized (non-nano) Titania particles and to quartz particles (DQ12, known to be potent lung toxicants). To build a PBPK model for nano-Titania the tissue distribution of the material was also examined following intravenous (i.v.) administration.

Final Scientific/Technical Report – March 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Armstrong, Neal R.

The Center for Interface Science: Solar Electric Materials (CISSEM) was funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences (BES) from August 1, 2009 – December 31, 2014 under Award Number DE-SC0001084, as part of a broad set of Energy Frontier Research Centers (EFRCs) designed to underpin the development of economical energy conversion platforms for the 21st century. CISSEM successfully integrated the research groups of 19 principal investigators at The University of Arizona (the lead institution), the Georgia Institute of Technology, Princeton University, the University of Washington, and the National Renewable Energy Laboratory (NREL) into amore » coordinated and synergistic program, while also building a highly productive collaboration with the SLAC National Accelerator Laboratory. Our mission was to advance the understanding of interface science underlying solar energy conversion technologies based on organic and organic-inorganic hybrid materials – specifically in organic photovoltaic solar cells (OPVs); and to inspire, recruit and train future scientists and leaders in the basic science of solar electric energy conversion. CISSEM researchers focused on establishing a foundational understanding of the electronic properties of interfaces in area-scalable, thin-film photovoltaic platforms. Metal oxide interlayers used in OPVs to improve the efficiency of charge harvesting at electrodes was our central focus. A key feature of CISSEM research has been our ability to develop a comprehensive understanding of interfaces and interfacial processes at the atomic and molecular scales. This is a scientific foundation for thin-film photovoltaic technologies and our nation’s pursuit of lowering the costs of transforming the sun’s energy into electricity. Our efforts combined: i) theoretical modeling; ii) new materials development; iii) developing new measurement science approaches to characterize composition, molecular and supramolecular structure, band edge energies, electrical properties, and charge harvesting or injection; and iv) integrating our use-inspired new materials and enhanced knowledge of interfaces and interfacial processes into OPV platforms. The strengths of the characterization methodologies developed in CISSEM were recognized within the EFRC network, and were a major component of our interactions with other DOE-funded programs including EFRCs. CISSEM research has resulted in a legacy of 120+ peer-reviewed publications describing our basic science. Much of this highly collaborative research will now be built upon at CISSEM member institutions, with other extramural funding sources. Furthermore, the state-of-the-art facilities and expertise created for modern interface science, especially as they pertain to energy conversion and energy storage challenges, will ensure their broadest continued impact. DOE EFRC funding has positively impacted and enhanced the training and development of more than 140 graduate students, postdoctoral researchers and research scientists at the five CISSEM institutions, and students from three Colorado universities associated with NREL. Our legacy also includes these student, postdoctoral researcher and scientist alumni who have taken positions of impact and responsibility in technology industries, government agencies and academia in the U.S., Asia and Europe.« less

Computer Science Techniques Applied to Parallel Atomistic Simulation

NASA Astrophysics Data System (ADS)

Nakano, Aiichiro

1998-03-01

Recent developments in parallel processing technology and multiresolution numerical algorithms have established large-scale molecular dynamics (MD) simulations as a new research mode for studying materials phenomena such as fracture. However, this requires large system sizes and long simulated times. We have developed: i) Space-time multiresolution schemes; ii) fuzzy-clustering approach to hierarchical dynamics; iii) wavelet-based adaptive curvilinear-coordinate load balancing; iv) multilevel preconditioned conjugate gradient method; and v) spacefilling-curve-based data compression for parallel I/O. Using these techniques, million-atom parallel MD simulations are performed for the oxidation dynamics of nanocrystalline Al. The simulations take into account the effect of dynamic charge transfer between Al and O using the electronegativity equalization scheme. The resulting long-range Coulomb interaction is calculated efficiently with the fast multipole method. Results for temperature and charge distributions, residual stresses, bond lengths and bond angles, and diffusivities of Al and O will be presented. The oxidation of nanocrystalline Al is elucidated through immersive visualization in virtual environments. A unique dual-degree education program at Louisiana State University will also be discussed in which students can obtain a Ph.D. in Physics & Astronomy and a M.S. from the Department of Computer Science in five years. This program fosters interdisciplinary research activities for interfacing High Performance Computing and Communications with large-scale atomistic simulations of advanced materials. This work was supported by NSF (CAREER Program), ARO, PRF, and Louisiana LEQSF.

A new experimental material for modeling relief dynamics and interactions between tectonics and surface processes

NASA Astrophysics Data System (ADS)

Graveleau, F.; Hurtrez, J.-E.; Dominguez, S.; Malavieille, J.

2011-12-01

We developed a new granular material (MatIV) to study experimentally landscape evolution in active mountain belt piedmonts. Its composition and related physical properties have been determined using empirical criteria derived from the scaling of deformation, erosion-transport and sedimentation natural processes. MatIV is a water-saturated composite material made up with 4 granular components (silica powder, glass microbeads, plastic powder and graphite) whose physical, mechanical and erosion-related properties were measured with different laboratory tests. Mechanical measurements were made on a modified Hubbert-type direct shear apparatus. Erosion-related properties were determined using an experimental set-up that allows quantifying the erosion/sedimentation budget from tilted relaxation topographies. For MatIV, we also investigated the evolution of mean erosion rates and stream power erosion law exponents in 1D as a function of slope. Our results indicate that MatIV satisfies most of the defined criteria. It deforms brittlely according to the linear Mohr-Coulomb failure criterion and localizes deformation along discrete faults. Its erosion pattern is characterized by realistic hillslope and channelized processes (slope diffusion, mass wasting, channel incision). During transport, eroded particles are sorted depending on their density and shape, which results in stratified alluvial deposits displaying lateral facies variations. To evaluate the degree of similitude between model and nature, we used a new experimental device that combines accretionary wedge deformation mechanisms and surface runoff erosion processes. Results indicate that MatIV succeeded in producing detailed morphological and sedimentological features (drainage basin, channel network, terrace, syntectonic alluvial fan). Geometric, kinematic and dynamic similarity criteria have been investigated to compare precisely model to nature. Although scaling is incomplete, it yields particularly informative orders of magnitude. With all these characteristics, MatIV appears as a very promising material to investigate experimentally a wide range of scientific questions dealing with relief dynamics and interactions between tectonics, erosion and sedimentation processes.

Technical communication: new teaching model for practicing ultrasound-guided regional anesthesia techniques: no perishable food products!

PubMed

Liu, Yang; Glass, Nancy L; Power, Robert W

2010-04-01

There is a pronounced learning curve for the technique of ultrasound-guided regional anesthesia. Practicing with a simulator model has been shown to speed the acquisition of these skills for various ultrasound-guided procedures. However, commercial models for ultrasound-guided regional anesthesia may be too costly or not readily available. Models using turkey breasts or tofu blocks have the disadvantage of containing perishable food products that can be a source for infection. We describe an alternative inexpensive model that is made from nonperishable components readily available in the operating room. The materials required include 1 clean used 500-mL bag of IV fluids, a bottle of Premisorb (TYCO Healthcare Group, Mansfield, MA), and a piece of foam material approximately 0.3 cm in diameter and 5 cm in length trimmed from operating room foam pads. After filling the IV bag with tap water and inserting the foam into the IV bag from the outlet port of the IV bag, one-third of a bottle of Premisorb (approximately 15 g) is poured into the IV bag. The outlet port of the bag is then sealed by taping the rubber stopper that originally came with the bag. Premisorb, a solidifying agent frequently used to absorb irrigating fluids or blood in operating room suction canisters, produces a gel-like material in the IV bag. The foam inserted into the bag creates a relatively hyperechoic target. This gel-like substance in the bag will seal the holes created after multiple practice needle insertions, resulting in minimal leakage. The semitransparent nature of the gel allows the trainee to visualize the target directly and on the ultrasound screen. The model we describe is inexpensive and easy to make from materials readily available in the operating room with the advantages of being nonperishable, easy to carry, and reusable.

Fundamental Understanding of Crack Growth in Structural Components of Generation IV Supercritical Light Water Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Iouri I. Balachov; Takao Kobayashi; Francis Tanzella

2004-11-17

This work contributes to the design of safe and economical Generation-IV Super-Critical Water Reactors (SCWRs) by providing a basis for selecting structural materials to ensure the functionality of in-vessel components during the entire service life. During the second year of the project, we completed electrochemical characterization of the oxide film properties and investigation of crack initiation and propagation for candidate structural materials steels under supercritical conditions. We ranked candidate alloys against their susceptibility to environmentally assisted degradation based on the in situ data measure with an SRI-designed controlled distance electrochemistry (CDE) arrangement. A correlation between measurable oxide film properties andmore » susceptibility of austenitic steels to environmentally assisted degradation was observed experimentally. One of the major practical results of the present work is the experimentally proven ability of the economical CDE technique to supply in situ data for ranking candidate structural materials for Generation-IV SCRs. A potential use of the CDE arrangement developed ar SRI for building in situ sensors monitoring water chemistry in the heat transport circuit of Generation-IV SCWRs was evaluated and proved to be feasible.« less

Growth and applications of GeSn-related group-IV semiconductor materials

PubMed Central

Zaima, Shigeaki; Nakatsuka, Osamu; Taoka, Noriyuki; Kurosawa, Masashi; Takeuchi, Wakana; Sakashita, Mitsuo

2015-01-01

We review the technology of Ge1−xSnx-related group-IV semiconductor materials for developing Si-based nanoelectronics. Ge1−xSnx-related materials provide novel engineering of the crystal growth, strain structure, and energy band alignment for realising various applications not only in electronics, but also in optoelectronics. We introduce our recent achievements in the crystal growth of Ge1−xSnx-related material thin films and the studies of the electronic properties of thin films, metals/Ge1−xSnx, and insulators/Ge1−xSnx interfaces. We also review recent studies related to the crystal growth, energy band engineering, and device applications of Ge1−xSnx-related materials, as well as the reported performances of electronic devices using Ge1−xSnx related materials. PMID:27877818

Growth and applications of GeSn-related group-IV semiconductor materials.

PubMed

Zaima, Shigeaki; Nakatsuka, Osamu; Taoka, Noriyuki; Kurosawa, Masashi; Takeuchi, Wakana; Sakashita, Mitsuo

2015-08-01

We review the technology of Ge 1- x Sn x -related group-IV semiconductor materials for developing Si-based nanoelectronics. Ge 1- x Sn x -related materials provide novel engineering of the crystal growth, strain structure, and energy band alignment for realising various applications not only in electronics, but also in optoelectronics. We introduce our recent achievements in the crystal growth of Ge 1- x Sn x -related material thin films and the studies of the electronic properties of thin films, metals/Ge 1- x Sn x , and insulators/Ge 1- x Sn x interfaces. We also review recent studies related to the crystal growth, energy band engineering, and device applications of Ge 1- x Sn x -related materials, as well as the reported performances of electronic devices using Ge 1- x Sn x related materials.

Xiaowen Chen | NREL

Science.gov Websites

Xiaowen Chen Photo of Xiaowen Chen Xiaowen Chen Researcher IV-Chemical Engineering Xiaowen.Chen Education Ph.D., Chemical Engineering, University of Maine, 2009 M.S., Chemical Engineering, University of Maine, 2005 B.S., Chemical Engineering in Polymer Science and Technology, Nanjing University of Science

The Intersection of Identity, Culture and Science Engagement

ERIC Educational Resources Information Center

Strong, LaToya

2016-01-01

Ivã Gurgel, Mauricio Pietrocola, and Graciella Watanabe expand upon the existing literature, which links identity and science engagement. Specifically, the authors focus on ways in which the cultural identities of students relate to their engagement in physics. In doing so, Gurgel, Pietrocola, and Watanabe further build upon the idea that one's…

Validation Report for the Title IV-C Health Through Science Project, 1979-80.

ERIC Educational Resources Information Center

McLean, James E.; And Others

Three objectives were identified regarding the Health Through Science Project, a comprehensive K-12 health project designed to increase student knowledge and understanding of health topic. Topics composing the core curriculum of the project were nutrition, safety, family living skills, personal hygiene and health, and human reproduction. Upon full…

Emissivity of Candidate Materials for VHTR Applicationbs: Role of Oxidation and Surface Modification Treatments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sridharan, Kumar; Allen, Todd; Anderson, Mark

The Generation IV (GEN IV) Nuclear Energy Systems Initiative was instituted by the Department of Energy (DOE) with the goal of researching and developing technologies and materials necessary for various types of future reactors. These GEN IV reactors will employ advanced fuel cycles, passive safety systems, and other innovative systems, leading to significant differences between these future reactors and current water-cooled reactors. The leading candidate for the Next Generation Nuclear Plant (NGNP) to be built at Idaho National Lab (INL) in the United States is the Very High Temperature Reactor (VHTR). Due to the high operating temperatures of the VHTR,more » the Reactor Pressure Vessel (RPV) will partially rely on heat transfer by radiation for cooling. Heat expulsion by radiation will become all the more important during high temperature excursions during off-normal accident scenarios. Radiant power is dictated by emissivity, a material property. The NGNP Materials Research and Development Program Plan [1] has identified emissivity and the effects of high temperature oxide formation on emissivity as an area of research towards the development of the VHTR.« less

FY-16 Technology Gap Study Technical Report: Analysis of Undissolved Anode Materials of Mark-IV Electrorefiner

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoo, Tae-Sic; Vaden, DeeEarl; Westphal, Brian Robert

2016-01-01

The Experimental Breeder Reactor II (EBR-II) is a sodium cooled fast reactor developed at Argonne National Laboratory (ANL). The used fuels from the EBR-II are currently being treated in the Fuel Conditioning Facility (FCF) at the Idaho National Laboratory (INL). The Mark IV (Mk-IV) electrorefiner (ER) is a unit process in the FCF, which is primarily assigned to treating the used driver fuels. The stainless steel anode baskets hold the chopped spent driver fuel segments. During electrorefining, the anode baskets are immersed into the electrolyte and the used fuel is dissolved electrochemically. Perforated sides and bottoms allow the flow ofmore » the electrolyte into and out of the anode baskets. The steel cathode is also immersed into the electrolyte and collects the reduced products. The active metal contents in the used fuel (e.g., Cs, Sr, lanthanides, Pu, etc.) reacts with uranium cations in the electrolyte and progressively reports to the electrolyte. Noble metals are mostly retained in the cladding hulls. Varying quantities of zirconium are retained in the cladding hulls depending on the operational conditions of the Mk-IV ER. The undissolved anode materials are removed from the anode baskets and stored for subsequent metal waste form processing. These undissolved materials typically include undissolved fuels, stainless steel cladding, and adhering electrolyte. A couple of hulls are retrieved for chemical analysis and used for estimating the composition of the entire undissolved anode materials. The mass balance attempt based on this practice of estimating the undissolved anode materials has been a challenge due to inherently high sampling errors associated with heterogeneous undissolved material compositions. Responding to the prescribed challenge, this report investigates chemical analysis data as a whole and finds noticeable trends in the compositions of undissolved anode material samples with respect to the mass of the whole undissolved anode materials. Based upon this discovery, an empirical model is proposed.« less

Which One Is Better? Jigsaw II versus Jigsaw IV on the Subject of the Building Blocks of Matter and Atom

ERIC Educational Resources Information Center

Turkmen, Hakan; Buyukaltay, Didem

2015-01-01

In this study, the effect of using Jigsaw II and Jigsaw IV techniques on the subject of "Atoms-The Basic Unit of Matter" in science course of 6th grade on academic achievement was examined. Pre-test post-test control group research was used in the study. Study population is all secondary schools in Turgutlu district of Manisa province…

The Materials Data Facility: Data Services to Advance Materials Science Research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blaiszik, B.; Chard, K.; Pruyne, J.

2016-07-06

With increasingly strict data management requirements from funding agencies and institutions, expanding focus on the challenges of research replicability, and growing data sizes and heterogeneity, new data needs are emerging in the materials community. The materials data facility (MDF) operates two cloudhosted services, data publication and data discovery, with features to promote open data sharing, self-service data publication and curation, and encourage data reuse, layered with powerful data discovery tools. The data publication service simplifies the process of copying data to a secure storage location, assigning data a citable persistent identifier, and recording custom (e.g., material, technique, or instrument specific)andmore » automatically-extractedmetadata in a registrywhile the data discovery service will provide advanced search capabilities (e.g., faceting, free text range querying, and full text search) against the registered data and metadata. TheMDF services empower individual researchers, research projects, and institutions to (I) publish research datasets, regardless of size, from local storage, institutional data stores, or cloud storage, without involvement of thirdparty publishers; (II) build, share, and enforce extensible domain-specific custom metadata schemas; (III) interact with published data and metadata via representational state transfer (REST) application program interfaces (APIs) to facilitate automation, analysis, and feedback; and (IV) access a data discovery model that allows researchers to search, interrogate, and eventually build on existing published data. We describe MDF’s design, current status, and future plans.« less

The Materials Data Facility: Data Services to Advance Materials Science Research

NASA Astrophysics Data System (ADS)

Blaiszik, B.; Chard, K.; Pruyne, J.; Ananthakrishnan, R.; Tuecke, S.; Foster, I.

2016-08-01

With increasingly strict data management requirements from funding agencies and institutions, expanding focus on the challenges of research replicability, and growing data sizes and heterogeneity, new data needs are emerging in the materials community. The materials data facility (MDF) operates two cloud-hosted services, data publication and data discovery, with features to promote open data sharing, self-service data publication and curation, and encourage data reuse, layered with powerful data discovery tools. The data publication service simplifies the process of copying data to a secure storage location, assigning data a citable persistent identifier, and recording custom (e.g., material, technique, or instrument specific) and automatically-extracted metadata in a registry while the data discovery service will provide advanced search capabilities (e.g., faceting, free text range querying, and full text search) against the registered data and metadata. The MDF services empower individual researchers, research projects, and institutions to (I) publish research datasets, regardless of size, from local storage, institutional data stores, or cloud storage, without involvement of third-party publishers; (II) build, share, and enforce extensible domain-specific custom metadata schemas; (III) interact with published data and metadata via representational state transfer (REST) application program interfaces (APIs) to facilitate automation, analysis, and feedback; and (IV) access a data discovery model that allows researchers to search, interrogate, and eventually build on existing published data. We describe MDF's design, current status, and future plans.

Site Environmental Report for Calendar Year 2008. DOE Operations at The Boeing Company Santa Susana Field Laboratory, Area IV

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Ning; Rutherford, Phil; Amar, Ravnesh

2009-09-01

This Annual Site Environmental Report (ASER) for 2008 describes the environmental conditions related to work performed for the Department of Energy (DOE) at Area IV of Boeing’s Santa Susana Field Laboratory (SSFL). The Energy Technology Engineering Center (ETEC), a government-owned, company-operated test facility, was located in Area IV. The operations in Area IV included development, fabrication, and disassembly of nuclear reactors, reactor fuel, and other radioactive materials. Other activities in the area involved the operation of large-scale liquid metal facilities that were used for testing non-nuclear liquid metal fast breeder reactor components. All nuclear work was terminated in 1988; allmore » subsequent radiological work has been directed toward decontamination and decommissioning (D&D) of the former nuclear facilities and their associated sites. In May 2007, the D&D operations in Area IV were suspended by the DOE. The environmental monitoring programs were continued throughout the year. Results of the radiological monitoring program for the calendar year 2008 continue to indicate that there are no significant releases of radioactive material from Area IV of SSFL. All potential exposure pathways are sampled and/or monitored, including air, soil, surface water, groundwater, direct radiation, transfer of property (land, structures, waste), and recycling.« less

Analysis of Skylab IV fluid mechanic science demonstration

NASA Technical Reports Server (NTRS)

Klett, M. G.; Bourgeois, S. V.

1975-01-01

Several science demonstrations performed on Skylab III and IV were concerned with the behavior of fluid drops free floating in microgravity. These demonstrations, with large liquid drops, included the oscillation, rotation, impact and coalescence, and air injection into the drops. Rayleigh's analysis of the oscillation of spherical drops of a liquid predicts accurately the effect of size and surface tension on the frequency of vibrated water globules in the Skylab demonstration. However, damping occurred much faster than predicted by Lamb's or Scriven's analyses of the damping time for spherical drops. The impact demonstrations indicated that a minimum velocity is necessary to overcome surface forces and effect a coalescence, but a precise criterion for the coalescence of liquids in low g could not be determined.

50 CFR 679.24 - Gear limitations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... material that is brightly colored, UV-protected plastic tubing or 3/8 inch polyester line or material of an... tubing or 3/8 inch polyester line or material of an equivalent density. (iv) Snap gear streamer standard...

Extending the Use of Highly Porous and Functionalized MOFs to Th(IV) Capture.

PubMed

Zhang, Nan; Yuan, Li-Yong; Guo, Wen-Lu; Luo, Shi-Zhong; Chai, Zhi-Fang; Shi, Wei-Qun

2017-08-02

Thorium separation has recently become a hot topic because of the potential application of thorium as a future nuclear fuel, while metal-organic framework (MOF) materials have received much attention in the separation field due to their unique properties. Herein, a highly porous and stable MOF, UiO-66, and its carboxyl derivatives (UiO-66-COOH and UiO-66-(COOH) 2 ) were synthesized and explored for the first time for Th(IV) capture from a weak acidic solution. Although the introduction of carboxyl groups into UiO-66 leads to an obvious decrease in the surface area and pore volume, the adsorbability toward Th(IV) is greatly enhanced. At pH = 3.0, the saturated sorption capacity for Th(IV) into UiO-66-(COOH) 2 reached 350 mg/g, representing one of the largest values for Th(IV) capture by solid extraction. Moreover, the functionalized MOFs show fast sorption kinetics and desirable selectivity toward Th(IV) over a range of competing metal ions. A possible mechanism for the selective recognition of Th(IV) by these MOFs was explored on the basis of extended X-ray absorption fine structure and Fourier transform infrared analysis. It is concluded that UiO-66-COOH and UiO-66-(COOH) 2 sorb Th(IV) through the coordination of carboxyl anions in the pores of the MOFs, whereas in the case of UiO-66, both the precipitation and the exchange with the organic solvent contribute to the Th(IV) uptake. This study contributes to the assessment of the feasibility of MOFs applied in actinides separation and better understanding of actinides sorption behavior in this kind of hybrid porous solid materials.

Structural and thermochemical Aspects of (III-V)IV3 Material Assembly from First Principles

NASA Astrophysics Data System (ADS)

Chizmeshya, Andrew; Kouvetakis, John

2014-03-01

Alloys with (III-V)-(IV) compositions, including Si3(AlP), Si5-2y(AlP)y, Si3Al(As1-xNx), Si5-2yAl(P1-xNx)y and Ge5-2y(InP)y and have recently been synthesized as mono-crystalline films on Si substrates, using a synthesis route specifically designed to avoid phase separation between the III-V and IV constituents. Molecular ``building blocks'' containing group-V-centered III-V-IV3 cores, formed via interactions of group-III atoms and reactive silyly/germyl hydride precursors of desired composition (e.g, P(SiH3)3 , P(GeH3)3 , etc), assemble to form stable, covalent, diamond-like materials with the inherent tetrahedral symmetry and composition of the III-V-IV3 units. The resulting systems may provide access to a broad range of new semiconductor systems with extended optoelectronic properties, provided that the required molecular sources are available, the thermodynamic processes are viable, and the resulting alloy composition can be tuned to lattice-match the growth substrate. Molecular/solid-state simulations are used to identify promising synthetic pathways and guide the epitaxial creation of new (III-V)-(IV) materials. The thermodynamics of gas phase synthesis reactions, energetic stability of the alloys, and their epitaxial/chemical compatibility with the substrate are combined to form a global figure of merit. The latter corroborates the synthesis of known systems and predicts that formation of GaPSi3/Si(100), GaAsSi3/SiGe(100), AlPGe3/Ge(100) and InAsSi3/Ge(100) may also be favorable. Supported by NSF-DMR under SusChEM award #1309090.

The BALDER Beamline at the MAX IV Laboratory

NASA Astrophysics Data System (ADS)

Klementiev, K.; Norén, K.; Carlson, S.; Sigfridsson Clauss, K. G. V.; Persson, I.

2016-05-01

X-ray absorption spectroscopy (XAS) includes well-established methods to study the local structure around the absorbing element - extended X-ray absorption fine structure (EXAFS), and the effective oxidation number or to quantitatively determine the speciation of an element in a complex matrix - X-ray absorption near-edge structure (XANES). The increased brilliance and intensities available at the new generation of synchrotron light sources makes it possible to study, in-situ and in-operando, much more dilute systems with relevance for natural systems, as well as the micro-scale variability and dynamics of chemical reactions on the millisecond time-scale. The design of the BALDER beamline at the MAX IV Laboratory 3 GeV ring has focused on a high flux of photons in a wide energy range, 2.4-40 keV, where the K-edge is covered for the elements S to La, and the L 3-edge for all elements heavier than Sb. The overall design of the beamline will allow large flexibility in energy range, beam size and data collection time. The other focus of the beamline design is the possibility to perform multi-technique analyses on samples. Development of sample environment requires focus on implementation of auxiliary methods in such a way that techniques like Fourier transform infrared (FTIR) spectroscopy, UV-Raman spectroscopy, X-ray diffraction and/or mass spectrometry can be performed simultaneously as the XAS study. It will be a flexible system where different instruments can be plugged in and out depending on the needs for the particular investigation. Many research areas will benefit from the properties of the wiggler based light source and the capabilities to perform in-situ and in-operando measurements, for example environmental and geochemical sciences, nuclear chemistry, catalysis, materials sciences, and cultural heritage.

Hybrid bandgap engineering for super-hetero-epitaxial semiconductor materials, and products thereof

NASA Technical Reports Server (NTRS)

Park, Yeonjoon (Inventor); Choi, Sang H. (Inventor); King, Glen C. (Inventor); Elliott, James R. (Inventor)

2012-01-01

"Super-hetero-epitaxial" combinations comprise epitaxial growth of one material on a different material with different crystal structure. Compatible crystal structures may be identified using a "Tri-Unity" system. New bandgap engineering diagrams are provided for each class of combination, based on determination of hybrid lattice constants for the constituent materials in accordance with lattice-matching equations. Using known bandgap figures for previously tested materials, new materials with lattice constants that match desired substrates and have the desired bandgap properties may be formulated by reference to the diagrams and lattice matching equations. In one embodiment, this analysis makes it possible to formulate new super-hetero-epitaxial semiconductor systems, such as systems based on group IV alloys on c-plane LaF.sub.3; group IV alloys on c-plane langasite; Group III-V alloys on c-plane langasite; and group II-VI alloys on c-plane sapphire.

PM101: intravenous amiodarone formulation changes can improve medication safety.

PubMed

Souney, Paul F; Cooper, Warren D; Cushing, Daniel J

2010-03-01

Intravenous amiodarone (A-IV) is used to manage ventricular and atrial arrhythmias. The current formulation uses polysorbate 80 and benzyl alcohol to maintain amiodarone in solution, and these co-solvents are linked with clinically-important adverse events and pharmaceutical incompatibilities. PM101 is a recently FDA-approved intravenous formulation of amiodarone that uses a cyclodextrin to solubilize amiodarone. This review describes the clinical and pharmaceutical development of formulations of amiodarone for intravenous administration. The medical and pharmaceutical literature was searched for papers discussing A-IV, PM101 and their formulation components. Relevant literature was identified starting from 1948 to the present. The reader will learn about the important medical and pharmaceutical issues complicating A-IV administration, including an understanding of related hypotension and compatibility with commonly used infusion materials and how these issues may impact drug safety. PM101 has been developed to address several of these important issues. PM101 is a new formulation of A-IV that is stable in commonly used infusion materials and avoids co-solvent related toxicities.

Ultrathin inorganic molecular nanowire based on polyoxometalates

PubMed Central

Zhang, Zhenxin; Murayama, Toru; Sadakane, Masahiro; Ariga, Hiroko; Yasuda, Nobuhiro; Sakaguchi, Norihito; Asakura, Kiyotaka; Ueda, Wataru

2015-01-01

The development of metal oxide-based molecular wires is important for fundamental research and potential practical applications. However, examples of these materials are rare. Here we report an all-inorganic transition metal oxide molecular wire prepared by disassembly of larger crystals. The wires are comprised of molybdenum(VI) with either tellurium(IV) or selenium(IV): {(NH4)2[XMo6O21]}n (X=tellurium(IV) or selenium(IV)). The ultrathin molecular nanowires with widths of 1.2 nm grow to micrometre-scale crystals and are characterized by single-crystal X-ray analysis, Rietveld analysis, scanning electron microscopy, X-ray photoelectron spectroscopy, ultraviolet–visible spectroscopy, thermal analysis and elemental analysis. The crystals can be disassembled into individual molecular wires through cation exchange and subsequent ultrasound treatment, as visualized by atomic force microscopy and transmission electron microscopy. The ultrathin molecular wire-based material exhibits high activity as an acid catalyst, and the band gap of the molecular wire-based crystal is tunable by heat treatment. PMID:26139011

MSTD 2007 Publications and Patents

DOE Office of Scientific and Technical Information (OSTI.GOV)

King, W E

2008-04-01

The Materials Science and Technology Division (MSTD) supports the central scientific and technological missions of the Laboratory, and at the same time, executes world-class, fundamental research and novel technological development over a wide range of disciplines. Our organization is driven by the institutional needs in nuclear weapons stockpile science, high-energy-density science, nuclear reactor science, and energy and environment science and technology. We maintain expertise and capabilities in many diverse areas, including actinide science, electron microscopy, laser-materials interactions, materials theory, simulation and modeling, materials synthesis and processing, materials science under extreme conditions, ultrafast materials science, metallurgy, nanoscience and technology, nuclear fuelsmore » and energy security, optical materials science, and surface science. MSTD scientists play leadership roles in the scientific community in these key and emerging areas.« less

Overview of the US Fusion Materials Sciences Program

NASA Astrophysics Data System (ADS)

Zinkle, Steven

2004-11-01

The challenging fusion reactor environment (radiation, heat flux, chemical compatibility, thermo-mechanical stresses) requires utilization of advanced materials to fulfill the promise of fusion to provide safe, economical, and environmentally acceptable energy. This presentation reviews recent experimental and modeling highlights on structural materials for fusion energy. The materials requirements for fusion will be compared with other demanding technologies, including high temperature turbine components, proposed Generation IV fission reactors, and the current NASA space fission reactor project to explore the icy moons of Jupiter. A series of high-performance structural materials have been developed by fusion scientists over the past ten years with significantly improved properties compared to earlier materials. Recent advances in the development of high-performance ferritic/martensitic and bainitic steels, nanocomposited oxide dispersion strengthened ferritic steels, high-strength V alloys, improved-ductility Mo alloys, and radiation-resistant SiC composites will be reviewed. Multiscale modeling is providing important insight on radiation damage and plastic deformation mechanisms and fracture mechanics behavior. Electron microscope in-situ straining experiments are uncovering fundamental physical processes controlling deformation in irradiated metals. Fundamental modeling and experimental studies are determining the behavior of transmutant helium in metals, enabling design of materials with improved resistance to void swelling and helium embrittlement. Recent chemical compatibility tests have identified promising new candidates for magnetohydrodynamic insulators in lithium-cooled systems, and have established the basic compatibility of SiC with Pb-Li up to high temperature. Research on advanced joining techniques such as friction stir welding will be described. ITER materials research will be briefly summarized.

Effects of Vanadium Substitution on the Structure and Photocatalytic Behavior of ETS-10

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shough,A.; Doren, D.; Nash, M.

2007-01-01

A combination of experimental and computational methods has been used to investigate the effects of vanadium doping in ETS-10. Near edge X-ray absorption fine structure (NEXAFS) spectra reveal octahedrally coordinated V{sup IV} and V{sup V} species within V-doped ETS-10 materials, confirming substitution for Ti{sup IV} sites only. Computational models, using hybrid density functional theory/molecular mechanics (DFT/MM) methods, have been developed that contain varying concentrations of V{sup IV} and V{sup V} within the O-M-O (M = Ti, V) chain. Geometry optimizations indicate that V{sup V} substitution leads to larger changes in the local chain geometry than V{sup IV} substitution. Substitution energeticsmore » for V{sup IV} and V{sup V} in different sites have been calculated to determine preferred locations of the two species, suggesting that long chains of V{sup V} are not stable and demonstrating the need for both V{sup V} and V{sup IV} within V-substituted materials. Wavefunctions for systems with an electron added or removed are used to identify electron and hole trapping sites associated with the V{sup V} and V{sup IV} doping centers respectively. An increase in photocatalytic activity is predicted at low [V] due to improved charge separation. However photocatalytic activity is expected to decrease at high [V] due to increased carrier recombination. These results are consistent with recent experimental data.« less

Computational Investigation of Technetium(IV) Incorporation into Inverse Spinels: Magnetite (Fe 3 O 4 ) and Trevorite (NiFe 2 O 4 )

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Frances N.; Um, Wooyong; Taylor, Christopher D.

2016-05-17

Iron oxides and oxyhydroxides play an important role in minimizing the mobility of redox-sensitive elements in engineered and natural environments. For the radionuclide technetium-99 (Tc), these phases hold promise as primary hosts for increasing Tc loading into glass waste form matrices, or as secondary sinks during the long-term storage of nuclear materials. Recent experiments show that the inverse spinel, magnetite [Fe(II)Fe(III)2O4], can incorporate Tc(IV) into its octahedral sub-lattice, and in that same class of materials, trevorite [Ni(II)Fe(III)2O4] is also being investigated for its ability to host Tc(IV). However, questions remain regarding the most energetically favorable charge-compensation mechanism for Tc(IV) incorporationmore » in each structure, which will affect Tc behavior under changing waste processing or storage conditions. Here, quantum-mechanical methods were used to evaluate incorporation energies and optimized lattice bonding environments for three different, charge-balanced Tc(IV) incorporation mechanisms in magnetite and trevorite. In both cases, the removal of two octahedral Fe(II) or Ni(II) ions upon the addition of Tc(IV) to an octahedral site is the most stable mechanism, relative to the creation of octahedral Fe(III) defects or increasing octahedral Fe(II) content. Following hydration-energy corrections, Tc(IV) incorporation into magnetite is energetically favorable while an energy barrier exists for trevorite.« less

Defense Science and Technology Strategy

DTIC Science & Technology

1994-09-01

I 3 IV. The Science and Technology Program .................... 15 Advanced Concept Technology Demomstrations...product and process concepts that pcrmit us to tailor, modify, and optimize the manufactUriiig process; develop sensors a-t i~a Mcrials that will detect...It can be used during concept formulations to expand the range of technical, operational, and system alternatives evaluated. The technology can

General Science, Ninth Grade: Theme III and Theme IV. Student Laboratory Manual. Experimental.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Div. of Curriculum and Instruction.

This document is the student laboratory manual that was designed to accompany some of the experimental activities found in the teacher's guide to this general science course for ninth graders. It contains laboratory worksheets for lessons on such topics as: (1) soil; (2) hazardous waste; (3) wildlife refuges; (4) the water cycle; (5) water…

Performance Enhancement of the NPS Transient Electromagnetic Scattering Laboratory

DTIC Science & Technology

1991-09-01

MASTER OF SCIENCE IN ELECTRICAL ENGINEERING MASTER OF SCIENCE IN SYSTEMS ENGINEERING (ELECTRONIC WARFARE) from NAVAL POSTGRADUATE S OOL Author: JvAlo...Bresani Approved by: Michael A. Morgan, Thesis Advisor Jeffrey B. Knorr, Second Reader Michael A. Morgan, Chairman, Department of Electrical & Computer...SYSTEM REPRESENTATION ... .......... 13 B. MATHEMATICAL MODEL ......... ..... 15 C. TRANSIENT RESPONSE EVALUATION .. ......... . 17 IV. MEASUREMENT

Site Environmental Report for Calendar Year 2006. DOE Operations at The Boeing Company Santa Susana Field Laboratory, Area IV

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Ning; Rutherford, Phil

2007-09-01

This Annual Site Environmental Report (ASER) for 2006 describes the environmental conditions related to work performed for the Department of Energy (DOE) at Area IV of Boeing’s Santa Susana Field Laboratory (SSFL). In the past, the Energy Technology Engineering Center (ETEC), a government-owned, company-operated test facility, was located in Area IV. The operations in Area IV included development, fabrication, and disassembly of nuclear reactors, reactor fuel, and other radioactive materials. Other activities in the area involved the operation of large-scale liquid metal facilities that were used for testing non-nuclear liquid metal fast breeder components. All nuclear work was terminated inmore » 1988; all subsequent radiological work has been directed toward decontamination and decommissioning (D&D) of the former nuclear facilities and their associated sites. Closure of the liquid metal test facilities began in 1996. Results of the radiological monitoring program for the calendar year 2006 continue to indicate that there are no significant releases of radioactive material from Area IV of SSFL. All potential exposure pathways are sampled and/or monitored, including air, soil, surface water, groundwater, direct radiation, transfer of property (land, structures, waste), and recycling.« less

Critical Issues on Materials for Gen-IV Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Caro, M; Marian, J; Martinez, E

2009-02-27

Within the LDRD on 'Critical Issues on Materials for Gen-IV Reactors' basic thermodynamics of the Fe-Cr alloy and accurate atomistic modeling were used to help develop the capability to predict hardening, swelling and embrittlement using the paradigm of Multiscale Materials Modeling. Approaches at atomistic and mesoscale levels were linked to build-up the first steps in an integrated modeling platform that seeks to relate in a near-term effort dislocation dynamics to polycrystal plasticity. The requirements originated in the reactor systems under consideration today for future sources of nuclear energy. These requirements are beyond the present day performance of nuclear materials andmore » calls for the development of new, high temperature, radiation resistant materials. Fe-Cr alloys with 9-12% Cr content are the base matrix of advanced ferritic/martensitic (FM) steels envisaged as fuel cladding and structural components of Gen-IV reactors. Predictive tools are needed to calculate structural and mechanical properties of these steels. This project represents a contribution in that direction. The synergy between the continuous progress of parallel computing and the spectacular advances in the theoretical framework that describes materials have lead to a significant advance in our comprehension of materials properties and their mechanical behavior. We took this progress to our advantage and within this LDRD were able to provide a detailed physical understanding of iron-chromium alloys microstructural behavior. By combining ab-initio simulations, many-body interatomic potential development, and mesoscale dislocation dynamics we were able to describe their microstructure evolution. For the first time in the case of Fe-Cr alloys, atomistic and mesoscale were merged and the first steps taken towards incorporating ordering and precipitation effects into dislocation dynamics (DD) simulations. Molecular dynamics (MD) studies of the transport of self-interstitial, vacancy and point defect clusters in concentrated Fe-Cr alloys were performed for future diffusion data calculations. A recently developed parallel MC code with displacement allowed us to predict the evolution of the defect microstructures, local chemistry changes, grain boundary segregation and precipitation resulting from radiation enhanced diffusion. We showed that grain boundaries, dislocations and free surfaces are not preferential for alpha-prime precipitation, and explained experimental observations of short-range order (SRO) in Fe-rich FeCr alloys. Our atomistic studies of dislocation hardening allowed us to obtain dislocation mobility functions for BCC pure iron and Fe-Cr and determine for FCC metals the dislocation interaction with precipitates with a description to be used in Dislocation Dynamic (DD) codes. A Synchronous parallel Kinetic Monte Carlo code was developed and tested which promises to expand the range of applicability of kMC simulations. This LDRD furthered the limits of the available science on the thermodynamic and mechanic behavior of metallic alloys and extended the application of physically-based multiscale materials modeling to cases of severe temperature and neutron fluence conditions in advanced future nuclear reactors. The report is organized as follows: after a brief introduction, we present the research activities, and results obtained. We give recommendations on future LLNL activities that may contribute to the progress in this area, together with examples of possible research lines to be supported.« less

A Challenge for International Cooperation in Astronomy and Basic Space Science

NASA Astrophysics Data System (ADS)

Haubold, Hans

In 1990, the United Nations in cooperation with the European Space Agency initiated the organization of a series of annual Workshops on Basic Space Science for the benefit of astronomers and space scientists in (i) Asia and the Pacific, (ii) Latin America and the Caribbean, (iii) Africa, (iv) Western Asia, and (v) Europe. This article provides an update on accomplishments of three cycles of these workshops and their follow-up projects held for the five regions in (i) India (1991), Sri Lanka (1995), (ii) Costa Rica and Colombia (1992), Honduras (1997), (iii) Nigeria (1993), (iv) Egypt (1994), Jordan (1999), and (v) Germany (1996), France (2000). The workshop series is being considered unique and a model for the world-wide development of astronomy and space science. It has been organized based on the notion that astronomy has deep roots in virtually every human culture, that it helps to understand humanity's place in the vast scale of the Universe, and that it increases the knowledge of humanity about its origins and evolution.

Nanostructure characteristics of ferroics and bio-ferroics in relation to the design consideration of nano-sensing elements

NASA Astrophysics Data System (ADS)

Pal, Madhuparna

The shift of the epicenter in the field of science and technology to the nano-world has become evident over the past couple of decades with the emergence of areas likes nanoscience, nanotechnology, nano-biotechnology, etc. Though the size of the devices has decreased, the capability of devices has increased rendering it as 'multifunctional/smart' devices. However the design of smart devices using a single phase material has reached to its limit, hence to make further progress "smart materials" are required. Sensors/actuators are mostly fabricated with popular ferroic materials (ferroelectric/ ferromagnetic/ ferroelastic) or multiferroics (having more than one ferroic property). Multifunctionality can be the outcome of heterogeneous systems with cross-coupled properties, intrinsic as well as extrinsic, and hence modeling of smart materials with high figure of merit is also needed. Most ideas in smart sensing and actuation have been borrowed from the biological systems thus a step further is indeed to combine the engineering with the fundamental biological activities. Not only can we use multiferroic materials in artificial transplants, but we should also investigate ferroic activities in the biological samples. These fundamental issues, their possible solutions and their wide impact underlie the motivation of the current work in this thesis report. To achieve the ultimate goal, the steps outlined were followed: i. understanding the properties of sensing elements of inorganic and biomaterials at nanoscale level, ii. investigation of the multiferroicity, iii. modeling engineered material with better sensing capabilities iv. Finally exploiting the new concepts for device and biomedical applications. The findings of this thesis reports multiferroic behavior in a selected class of single crystals, thin films and bulk materials. Human nails and hair samples have been investigated for ferroelectricity and a comprehensive study concludes the presence of bio-ferroelectricity. Bio-ceramic for potential bone replacement has been characterized for its electrical properties and evidence has been given for its suitability. Initiation of modeling of material with high figure of merit for pyroelectric applications has been done which provides a platform to tailor its boundary conditions, interplay of interfaces to obtain meta-property. A broader impact of this thesis was to come forth with ideas to medical diagnostics and health monitoring combining and enhancing the understanding of multiferroics at macro to nano level, modeling of efficient heterogeneous material system, science of bio-materials and applications of bio-ceramics.

FinEstBeaMS - A wide-range Finnish-Estonian Beamline for Materials Science at the 1.5 GeV storage ring at the MAX IV Laboratory

NASA Astrophysics Data System (ADS)

Pärna, R.; Sankari, R.; Kukk, E.; Nõmmiste, E.; Valden, M.; Lastusaari, M.; Kooser, K.; Kokko, K.; Hirsimäki, M.; Urpelainen, S.; Turunen, P.; Kivimäki, A.; Pankratov, V.; Reisberg, L.; Hennies, F.; Tarawneh, H.; Nyholm, R.; Huttula, M.

2017-07-01

The FinEstBeaMS beamline is under construction at the 1.5 GeV storage ring of the MAX IV Laboratory at Lund, Sweden. It has been designed to cover an unusually wide energy range from ultraviolet (4.3 eV) to soft X-rays (1000 eV) but experiments will also be possible at the Mg and Al Kα energies. Instead of having two different insertion devices and optical schemes for low and high photon energy regions, we have based our design on a single long-period, elliptically polarizing undulator and a plane grating monochromator. This solution will provide very good conditions for planned experiments in the whole photon energy region. The beamline will have two branches: one will mainly be used to investigate free atoms, molecules and clusters with photoelectron/photoion coincidence spectroscopy as well as solids with photoluminescence spectroscopy whereas the other one will be dedicated to ultra-high vacuum studies of surfaces and interfaces, utilizing X-ray photoelectron spectroscopy and X-ray absorption spectroscopy. This paper focuses on the optical design of the beamline and general design concepts of the gas phase and solid state end stations.

SiP monolayers: New 2D structures of group IV-V compounds for visible-light photohydrolytic catalysts

NASA Astrophysics Data System (ADS)

Ma, Zhinan; Zhuang, Jibin; Zhang, Xu; Zhou, Zhen

2018-06-01

Because of graphene and phosphorene, two-dimensional (2D) layered materials of group IV and group V elements arouse great interest. However, group IV-V monolayers have not received due attention. In this work, three types of SiP monolayers were computationally designed to explore their electronic structure and optical properties. Computations confirm the stability of these monolayers, which are all indirect-bandgap semiconductors with bandgaps in the range 1.38-2.21 eV. The bandgaps straddle the redox potentials of water at pH = 0, indicating the potential of the monolayers for use as watersplitting photocatalysts. The computed optical properties demonstrate that certain monolayers of SiP 2D materials are absorbers of visible light and would serve as good candidates for optoelectronic devices.

Unique reversibility in extraction mechanism of U compared to solvent extraction for sorption of U(VI) and Pu(IV) by a novel solvent impregnated resin containing trialkyl phosphine oxide functionalized ionic liquid.

PubMed

Paramanik, M; Panja, S; Dhami, P S; Yadav, J S; Kaushik, C P; Ghosh, S K

2018-07-15

Novel Solvent Impregnated Resin (SIR) material was prepared by impregnating a trialkyl phosphine oxide functionalized ionic liquid (IL) into an inert polymeric material XAD-7. A series of SIR materials were prepared by varying the IL quantity. Sorption of both U(VI) and Pu(IV) were found to increase with increasing IL concentration in SIR up to an optimum IL concentration of 435 mg g -1 of SIR beyond which no effect of IL concentration was observed. A change of mechanism of sorption for U(VI) by SIR was observed in comparison to solvent extraction. The dependency of U(VI) sorption with nitric acid concentration showed a reverse trend compared to solvent extraction studies while for Pu(IV) the trend remained same as observed with solvent extraction. Sorption of both the radionuclides was found to follow pseudo second order mechanism and Langmuir adsorption isotherm. Distribution co-efficient measurements on IL impregnated SIR showed highly selective sorption of U(VI) and Pu(IV) over other trivalent f-elements and fission products from nitric acid medium. Copyright © 2018 Elsevier B.V. All rights reserved.

Spectroscopic characterization of zirconium(IV) and hafniumf(IV) gallate phthalocyanines in monolithic silica gels obtained by sol gel method

NASA Astrophysics Data System (ADS)

Gerasymchuk, Y. S.; Chernii, V. Ya.; Tomachynski, L. A.; Legendziewicz, J.; Radzki, St.

2005-07-01

The Zr(IV) and Hf(IV) phthalocyanines, with gallate as axial ligand coordinated to the central metal atom of phthalocyanine, were incorporated in silica gels during sol-gel process with using tetraethyl orthosilicate (TEOS) as precursor. The obtained mixed inorganic-organic composites were transparent and homogeneous. The absorption and emission properties of these materials in comparison with the spectra of the Zr(IV) and Hf(IV) phthalocyanines in various solvents were investigated. The spectra were correlated with various stage of the sol-gel process. It was established that in the gels concurrence of the monomer and dimer form is different in sol, alco-, hydro- and xerogels. The intensive 700-725 nm fluorescence emission upon relatively long-wavelength excitation and unusually large (about 45 nm) Stokes shift in the Q region, suggest that Zr(IV) and Hf(IV) phthalocyanines could be considered as photosensitizers in the PDT method (photodynamic therapy).

Comparison of Thermal Detector Arrays for Off-Axis THz Holography and Real-Time THz Imaging

PubMed Central

Hack, Erwin; Valzania, Lorenzo; Gäumann, Gregory; Shalaby, Mostafa; Hauri, Christoph P.; Zolliker, Peter

2016-01-01

In terahertz (THz) materials science, imaging by scanning prevails when low power THz sources are used. However, the application of array detectors operating with high power THz sources is increasingly reported. We compare the imaging properties of four different array detectors that are able to record THz radiation directly. Two micro-bolometer arrays are designed for infrared imaging in the 8–14 μm wavelength range, but are based on different absorber materials (i) vanadium oxide; (ii) amorphous silicon; (iii) a micro-bolometer array optimized for recording THz radiation based on silicon nitride; and (iv) a pyroelectric array detector for THz beam profile measurements. THz wavelengths of 96.5 μm, 118.8 μm, and 393.6 μm from a powerful far infrared laser were used to assess the technical performance in terms of signal to noise ratio, detector response and detectivity. The usefulness of the detectors for beam profiling and digital holography is assessed. Finally, the potential and limitation for real-time digital holography are discussed. PMID:26861341

Comparison of Thermal Detector Arrays for Off-Axis THz Holography and Real-Time THz Imaging.

PubMed

Hack, Erwin; Valzania, Lorenzo; Gäumann, Gregory; Shalaby, Mostafa; Hauri, Christoph P; Zolliker, Peter

2016-02-06

In terahertz (THz) materials science, imaging by scanning prevails when low power THz sources are used. However, the application of array detectors operating with high power THz sources is increasingly reported. We compare the imaging properties of four different array detectors that are able to record THz radiation directly. Two micro-bolometer arrays are designed for infrared imaging in the 8-14 μm wavelength range, but are based on different absorber materials (i) vanadium oxide; (ii) amorphous silicon; (iii) a micro-bolometer array optimized for recording THz radiation based on silicon nitride; and (iv) a pyroelectric array detector for THz beam profile measurements. THz wavelengths of 96.5 μm, 118.8 μm, and 393.6 μm from a powerful far infrared laser were used to assess the technical performance in terms of signal to noise ratio, detector response and detectivity. The usefulness of the detectors for beam profiling and digital holography is assessed. Finally, the potential and limitation for real-time digital holography are discussed.

Nanoscale Engineering of Heterostructured Anode Materials for Boosting Lithium-Ion Storage.

PubMed

Chen, Gen; Yan, Litao; Luo, Hongmei; Guo, Shaojun

2016-09-01

Rechargeable lithium-ion batteries (LIBs), as one of the most important electrochemical energy-storage devices, currently provide the dominant power source for a range of devices, including portable electronic devices and electric vehicles, due to their high energy and power densities. The interest in exploring new electrode materials for LIBs has been drastically increasing due to the surging demands for clean energy. However, the challenging issues essential to the development of electrode materials are their low lithium capacity, poor rate ability, and low cycling stability, which strongly limit their practical applications. Recent remarkable advances in material science and nanotechnology enable rational design of heterostructured nanomaterials with optimized composition and fine nanostructure, providing new opportunities for enhancing electrochemical performance. Here, the progress as to how to design new types of heterostructured anode materials for enhancing LIBs is reviewed, in the terms of capacity, rate ability, and cycling stability: i) carbon-nanomaterials-supported heterostructured anode materials; ii) conducting-polymer-coated electrode materials; iii) inorganic transition-metal compounds with core@shell structures; and iv) combined strategies to novel heterostructures. By applying different strategies, nanoscale heterostructured anode materials with reduced size, large surfaces area, enhanced electronic conductivity, structural stability, and fast electron and ion transport, are explored for boosting LIBs in terms of high capacity, long cycling lifespan, and high rate durability. Finally, the challenges and perspectives of future materials design for high-performance LIB anodes are considered. The strategies discussed here not only provide promising electrode materials for energy storage, but also offer opportunities in being extended for making a variety of novel heterostructured nanomaterials for practical renewable energy applications. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Site Environmental Report for Calendar Year 2009. DOE Operations at The Boeing Company Santa Susana Field Laboratory, Area IV

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Ning; Rutherford, Phil; Amar, Ravnesh

2010-09-01

This Annual Site Environmental Report (ASER) for 2009 describes the environmental conditions related to work performed for the Department of Energy (DOE) at Area IV of Boeing’s Santa Susana Field Laboratory (SSFL). The Energy Technology Engineering Center (ETEC), a government-owned, company-operated test facility, was located in Area IV. The operations in Area IV included development, fabrication, and disassembly of nuclear reactors, reactor fuel, and other radioactive materials. Other activities in the area involved the operation of large-scale liquid metal facilities that were used for testing non-nuclear liquid metal fast breeder reactor components. All nuclear work was terminated in 1988, andmore » all subsequent radiological work has been directed toward decontamination and decommissioning (D&D) of the former nuclear facilities and their associated sites. Liquid metal research and development ended in 2002. Since May 2007, the D&D operations in Area IV have been suspended by the DOE, but the environmental monitoring and characterization programs have continued. Results of the radiological monitoring program for the calendar year 2009 continue to indicate that there are no significant releases of radioactive material from Area IV of SSFL. All potential exposure pathways are sampled and/or monitored, including air, soil, surface water, groundwater, direct radiation, transfer of property (land, structures, waste), and recycling.« less

Site Environmental Report for Calendar Year 2011. DOE Operations at The Boeing Company Santa Susana Field Laboratory, Area IV

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Ning; Rutherford, Phil; Dassler, David

2012-09-01

This Annual Site Environmental Report (ASER) for 2011 describes the environmental conditions related to work performed for the Department of Energy (DOE) at Area IV of Boeing’s Santa Susana Field Laboratory (SSFL). The Energy Technology Engineering Center (ETEC), a government-owned, company-operated test facility, was located in Area IV. The operations in Area IV included development, fabrication, operation and disassembly of nuclear reactors, reactor fuel, and other radioactive materials. Other activities in the area involved the operation of large-scale liquid metal facilities that were used for testing non-nuclear liquid metal fast breeder reactor components. All nuclear work was terminated in 1988,more » and all subsequent radiological work has been directed toward environmental restoration and decontamination and decommissioning (D&D) of the former nuclear facilities and their associated sites. Liquid metal research and development ended in 2002. Since May 2007, the D&D operations in Area IV have been suspended by the DOE, but the environmental monitoring and characterization programs have continued. Results of the radiological monitoring program for the calendar year 2011 continue to indicate that there are no significant releases of radioactive material from Area IV of SSFL. All potential exposure pathways are sampled and/or monitored, including air, soil, surface water, groundwater, direct radiation, transfer of property (land, structures, waste), and recycling.« less

Site Environmental Report for Calendar Year 2010. DOE Operations at The Boeing Company Santa Susana Field Laboratory, Area IV

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Ning; Rutherford, Phil; Amar, Ravnesh

2011-09-01

This Annual Site Environmental Report (ASER) for 2010 describes the environmental conditions related to work performed for the Department of Energy (DOE) at Area IV of Boeing’s Santa Susana Field Laboratory (SSFL). The Energy Technology Engineering Center (ETEC), a government-owned, company-operated test facility, was located in Area IV. The operations in Area IV included development, fabrication, and disassembly of nuclear reactors, reactor fuel, and other radioactive materials. Other activities in the area involved the operation of large-scale liquid metal facilities that were used for testing non-nuclear liquid metal fast breeder reactor components. All nuclear work was terminated in 1988, andmore » all subsequent radiological work has been directed toward decontamination and decommissioning (D&D) of the former nuclear facilities and their associated sites. Liquid metal research and development ended in 2002. Since May 2007, the D&D operations in Area IV have been suspended by the DOE, but the environmental monitoring and characterization programs have continued. Results of the radiological monitoring program for the calendar year 2010 continue to indicate that there are no significant releases of radioactive material from Area IV of SSFL. All potential exposure pathways are sampled and/or monitored, including air, soil, surface water, groundwater, direct radiation, transfer of property (land, structures, waste), and recycling.« less

Site Environmental Report For Calendar Year 2012. DOE Operations at The Boeing Company Santa Susana Field Laboratory, Area IV

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Ning; Rutherford, Phil; Dassler, David

2013-09-01

This Annual Site Environmental Report (ASER) for 2012 describes the environmental conditions related to work performed for the Department of Energy (DOE) at Area IV of Boeing’s Santa Susana Field Laboratory (SSFL). The Energy Technology Engineering Center (ETEC), a government-owned, company-operated test facility, was located in Area IV. The operations in Area IV included development, fabrication, operation and disassembly of nuclear reactors, reactor fuel, and other radioactive materials. Other activities in the area involved the operation of large-scale liquid metal facilities that were used for testing non-nuclear liquid metal fast breeder reactor components. All nuclear work was terminated in 1988,more » and all subsequent radiological work has been directed toward environmental restoration and decontamination and decommissioning (D&D) of the former nuclear facilities and their associated sites. Liquid metal research and development ended in 2002. Since May 2007, the D&D operations in Area IV have been suspended by the DOE, but the environmental monitoring and characterization programs have continued. Results of the radiological monitoring program for the calendar year 2012 continue to indicate that there are no significant releases of radioactive material from Area IV of SSFL. All potential exposure pathways are sampled and/or monitored, including air, soil, surface water, groundwater, direct radiation, transfer of property (land, structures, waste), and recycling.« less

Experimental hydrophilic vinyl polysiloxane (VPS) impression materials incorporating a novel surfactant compared with commercial VPS.

PubMed

Ud Din, Shahab; Parker, Sandra; Braden, Michael; Tomlins, Pete; Patel, Mangala

2017-08-01

To formulate experimental hydrophilic (Exp) VPS impression materials incorporating a novel surfactant (Rhodasurf CET-2), and to compare their contact angles (CAs) with commercial materials, before/after disinfection. CAs were measured immediately after setting and after disinfection (1% NaOCl; 30min and 24h), together with their change whilst a droplet remained on the materials surface (over 10, 20, 30 60 and 120s), on three commercial (Aquasil Ultra-Monophase [Aq M], Elite HD-Monophase [Elt M], Extrude Medium-bodied [Extr M]) and four experimental (Exp I-IV) materials, using the Drop Shape Analysis 100 technique. The results were compared statistically. CAs of all experimental materials were within the range of those obtained for the commercial materials, with the exception of Exp-IV, which presented with the lowest CAs at the three time points. The control Exp-I was hydrophobic at all three time points (CAs ∼100+), as was Elite. Immediately after setting, Aq M had low CAs but these increased significantly after 30min of disinfection. After twenty four hours' disinfection CAs of all Exp/commercial VPS increased significantly compared to immediately after setting. The CAs of droplets left on the material (120s) decreased with time, even after disinfection, except for Exp-I. The novel surfactant Rhodasurf CET-2 in Exp-III and IV, is an effective surfactant, retaining a low CA after disinfection, compared with Igepal CO-530 in Aq M. Disinfecting VPS impression materials for more than 30min increases their surface CAs, and therefore prolonged disinfection periods should be avoided. Copyright © 2017 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

21 CFR 111.27 - What requirements apply to the equipment and utensils that you use?

Code of Federal Regulations, 2012 CFR

2012-04-01

... MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Equipment and Utensils § 111... contamination of components or dietary supplements with: (i) Lubricants; (ii) Fuel; (iii) Coolants; (iv) Metal... equipment or utensils contact components or dietary supplements; (iii) Made of nontoxic materials; (iv...

21 CFR 111.27 - What requirements apply to the equipment and utensils that you use?

Code of Federal Regulations, 2014 CFR

2014-04-01

... MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Equipment and Utensils § 111... contamination of components or dietary supplements with: (i) Lubricants; (ii) Fuel; (iii) Coolants; (iv) Metal... equipment or utensils contact components or dietary supplements; (iii) Made of nontoxic materials; (iv...

Hydrogen storage material and related processes

DOEpatents

Soloveichik, Grigorii Lev [Latham, NY; Andrus, Matthew John [Cape Canaveral, FL

2012-06-05

Disclosed herein is a composition comprising a complex hydride and a borohydride catalyst wherein the borohydride catalyst comprises a BH.sub.4 group, and a group IV metal, a group V metal, or a combination of a group IV and a group V metal. Also disclosed herein are methods of making the composition.

Hydrogen storage material and related processes

DOEpatents

Soloveichik; Grigorii Lev , Andrus; Matthew John

2010-07-13

Disclosed herein is a composition comprising a complex hydride and a borohydride catalyst wherein the borohydride catalyst comprises a BH.sub.4 group, and a group IV metal, a group V metal, or a combination of a group IV and a group V metal. Also disclosed herein are methods of making the composition.

Day Camp Manual: Program. Book IV.

ERIC Educational Resources Information Center

Babcock, William

Book IV in a 5-book day camp manual discusses the camp program. Section I describes the organization, definition, and elements essential to successful day camp programs. Section II, which addresses the benefits and special considerations of mass programs, includes rainy day contingencies, materials to have on hand, and activity suggestions.…

Horticulture III, IV, and V. Task Analyses. Competency-Based Education.

ERIC Educational Resources Information Center

Henrico County Public Schools, Glen Allen, VA. Virginia Vocational Curriculum Center.

This task analysis guide is intended to help teachers and administrators develop instructional materials and implement competency-based education in the horticulture program. Section 1 contains a validated task inventory for horticulture III, IV, and V. For each task, applicable information pertaining to performance and enabling objectives,…

33 CFR 385.26 - Project Implementation Reports.

Code of Federal Regulations, 2014 CFR

2014-07-01

... available science; (iii) Comply with all applicable Federal, State, and Tribal laws; (iv) Contain sufficient... boundary of regional computer models or projects whose effects cannot be captured in regional computer...

33 CFR 385.26 - Project Implementation Reports.

Code of Federal Regulations, 2011 CFR

2011-07-01

... available science; (iii) Comply with all applicable Federal, State, and Tribal laws; (iv) Contain sufficient... boundary of regional computer models or projects whose effects cannot be captured in regional computer...

33 CFR 385.26 - Project Implementation Reports.

Code of Federal Regulations, 2012 CFR

2012-07-01

... available science; (iii) Comply with all applicable Federal, State, and Tribal laws; (iv) Contain sufficient... boundary of regional computer models or projects whose effects cannot be captured in regional computer...

33 CFR 385.26 - Project Implementation Reports.

Code of Federal Regulations, 2013 CFR

2013-07-01

... available science; (iii) Comply with all applicable Federal, State, and Tribal laws; (iv) Contain sufficient... boundary of regional computer models or projects whose effects cannot be captured in regional computer...

Synthesis of refractory materials

DOEpatents

Holt, Joseph B.

1984-01-01

Refractory metal nitrides are synthesized during a self-propagating combustion process utilizing a solid source of nitrogren. For this purpose, a metal azide is employed, preferably NaN.sub.3. The azide is combusted with Mg or Ca, and a metal oxide is selected from Groups III-A, IV-A, III-B, IV-B, or a rare earth metal oxide. The mixture of azide, Ca or Mg and metal oxide is heated to the mixture's ignition temperature. At that temperature the mixture is ignited and undergoes self-sustaining combustion until the starter materials are exhausted, producing the metal nitride.

Synthesis of refractory materials

DOEpatents

Holt, J.B.

1983-08-16

Refractory metal nitrides are synthesized during a self-propagating combustion process utilizing a solid source of nitrogen. For this purpose, a metal azide is employed, preferably NaN/sub 3/. The azide is combusted with Mg or Ca, and a metal oxide is selected from Groups III-A, IV-A, III-B, IV-B, or a rare earth metal oxide. The mixture of azide, Ca or Mg and metal oxide is heated to the mixture's ignition temperature. At that temperature the mixture is ignited and undergoes self-sustaining combustion until the starter materials are exhausted, producing the metal nitride.

40 CFR 799.5115 - Chemical testing requirements for certain chemicals of interest to the Occupational Safety and...

Code of Federal Regulations, 2013 CFR

2013-07-01

... section (test substance), it is important to determine the rate of absorption of the test substance in... Sciences. 75:1094-1097. 1986. (ii) Bronaugh, R.L. and Stewart, R.F. Methods for In Vitro Percutaneous Absorption Studies IV: The Flow-Through Diffusion Cell. Journal of Pharmaceutical Sciences. 74:64-67. 1985...

40 CFR 799.5115 - Chemical testing requirements for certain chemicals of interest to the Occupational Safety and...

Code of Federal Regulations, 2014 CFR

2014-07-01

... section (test substance), it is important to determine the rate of absorption of the test substance in... Sciences. 75:1094-1097. 1986. (ii) Bronaugh, R.L. and Stewart, R.F. Methods for In Vitro Percutaneous Absorption Studies IV: The Flow-Through Diffusion Cell. Journal of Pharmaceutical Sciences. 74:64-67. 1985...

40 CFR 799.5115 - Chemical testing requirements for certain chemicals of interest to the Occupational Safety and...

Code of Federal Regulations, 2011 CFR

2011-07-01

... section (test substance), it is important to determine the rate of absorption of the test substance in... Sciences. 75:1094-1097. 1986. (ii) Bronaugh, R.L. and Stewart, R.F. Methods for In Vitro Percutaneous Absorption Studies IV: The Flow-Through Diffusion Cell. Journal of Pharmaceutical Sciences. 74:64-67. 1985...

40 CFR 799.5115 - Chemical testing requirements for certain chemicals of interest to the Occupational Safety and...

Code of Federal Regulations, 2012 CFR

2012-07-01

... section (test substance), it is important to determine the rate of absorption of the test substance in... Sciences. 75:1094-1097. 1986. (ii) Bronaugh, R.L. and Stewart, R.F. Methods for In Vitro Percutaneous Absorption Studies IV: The Flow-Through Diffusion Cell. Journal of Pharmaceutical Sciences. 74:64-67. 1985...

Materials Science Research Hardware for Application on the International Space Station: an Overview of Typical Hardware Requirements and Features

NASA Technical Reports Server (NTRS)

Schaefer, D. A.; Cobb, S.; Fiske, M. R.; Srinivas, R.

2000-01-01

NASA's Marshall Space Flight Center (MSFC) is the lead center for Materials Science Microgravity Research. The Materials Science Research Facility (MSRF) is a key development effort underway at MSFC. The MSRF will be the primary facility for microgravity materials science research on board the International Space Station (ISS) and will implement the NASA Materials Science Microgravity Research Program. It will operate in the U.S. Laboratory Module and support U. S. Microgravity Materials Science Investigations. This facility is being designed to maintain the momentum of the U.S. role in microgravity materials science and support NASA's Human Exploration and Development of Space (HEDS) Enterprise goals and objectives for Materials Science. The MSRF as currently envisioned will consist of three Materials Science Research Racks (MSRR), which will be deployed to the International Space Station (ISS) in phases, Each rack is being designed to accommodate various Experiment Modules, which comprise processing facilities for peer selected Materials Science experiments. Phased deployment will enable early opportunities for the U.S. and International Partners, and support the timely incorporation of technology updates to the Experiment Modules and sensor devices.

Interactive Materials In The Teaching Of Astronomy

NASA Astrophysics Data System (ADS)

Macêdo, J. A.; Voelzke, M. R.

2014-10-01

This study presents results of a survey conducted at the Federal Institution of Education, Science and Technology in the North of Minas Gerais (IFNMG), and aimed to investigate the potentialities of the use of interactive materials in the teaching of astronomy. An advanced training course with involved learning activities about basic concepts of astronomy was offered to thirty-two Licenciate students in Physics, Mathematics and Biological Science. The following steps were to be taken: i) analysis of the pedagogical projects (PPC) of the licenciates at the IFNMG, research locus of its Campus Januária; ii) analysis of students' preconceptions about astronomy and digital technologies, identified by the application of an initial questionnaire; iii) preparation of the course taking into account the students' previous knowledge; iv) application of the education proposal developed under part-time presence modality, using various interactive tools; v) application and analysis of the final questionnaire. The test was conducted with the qualitative and quantitative methodology, combined with a content analysis. The results indicated that in the IFNMG only the licenciate-course in physics includes astronomy content diluted in various subjects of the curriculum; the rates of students prior knowledge in relation to astronomy was low; an evidence of meaningful learning of the concepts related to astronomy, and of viability of resource use involving digital technologies in the Teaching of astronomy, which may contribute to the broadening of methodological options of future teachers and meet their training needs.

Design Guidelines and Criteria for User/Operator Transactions with Battlefield Automated Systems. Volume IV. Provisional Guidelines and Criteria

DTIC Science & Technology

1981-02-01

r’!3 JN 2 1982 Resarc Intitte orthe Behavioral and Social Sciences February 1981 Aagroiiied-jr Public release; distribution un’’m’teci. DISCLAIMER...ARMY RESEARCH INSTITUTE FOR THE BEHAVIORAL AND SOCIAL SCIENCES A Field Operating Agency under the Jurisdiction of the Deputy Chief of Staff for...of reports to: U.S. Army Research Institute for the Behavioral and Social Sciences, ATTN: PERI-TST, 5001 Eisenhower Avenue, Alexandria, Virginia 22333

Site Environmental Report for Calendar Year 2007. DOE Operations at The Boeing Company, Santa Susana Field Laboratory, Area IV

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Ning; Rutherford, Phil; Lenox, Art

2008-09-30

This Annual Site Environmental Report (ASER) for 2007 describes the environmental conditions related to work performed for the Department of Energy (DOE) at Area IV of Boeing’s Santa Susana Field Laboratory (SSFL). The Energy Technology Engineering Center (ETEC), a government-owned, company-operated test facility, was located in Area IV. The operations in Area IV included development, fabrication, and disassembly of nuclear reactors, reactor fuel, and other radioactive materials. Other activities in the area involved the operation of large-scale liquid metal facilities that were used for testing non-nuclear liquid metal fast breeder components. All nuclear work was terminated in 1988; all subsequentmore » radiological work has been directed toward decontamination and decommissioning (D&D) of the former nuclear facilities and their associated sites. In May 2007, the D&D operations in Area IV were suspended until DOE completes the SSFL Area IV Environmental Impact Statement (EIS). The environmental monitoring programs were continued throughout the year. Results of the radiological monitoring program for the calendar year 2007 continue to indicate that there are no significant releases of radioactive material from Area IV of SSFL. All potential exposure pathways are sampled and/or monitored, including air, soil, surface water, groundwater, direct radiation, transfer of property (land, structures, waste), and recycling. All radioactive wastes are processed for disposal at DOE disposal sites and/or other licensed sites approved by DOE for radioactive waste disposal. No liquid radioactive wastes were released into the environment in 2007.« less

The dependence of C IV broad absorption line properties on accompanying Si IV and Al III absorption: relating quasar-wind ionization levels, kinematics, and column densities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Filiz Ak, N.; Brandt, W. N.; Schneider, D. P.

2014-08-20

We consider how the profile and multi-year variability properties of a large sample of C IV Broad Absorption Line (BAL) troughs change when BALs from Si IV and/or Al III are present at corresponding velocities, indicating that the line of sight intercepts at least some lower ionization gas. We derive a number of observational results for C IV BALs separated according to the presence or absence of accompanying lower ionization transitions, including measurements of composite profile shapes, equivalent width (EW), characteristic velocities, composite variation profiles, and EW variability. We also measure the correlations between EW and fractional-EW variability for Cmore » IV, Si IV, and Al III. Our measurements reveal the basic correlated changes between ionization level, kinematics, and column density expected in accretion-disk wind models; e.g., lines of sight including lower ionization material generally show deeper and broader C IV troughs that have smaller minimum velocities and that are less variable. Many C IV BALs with no accompanying Si IV or Al III BALs may have only mild or no saturation.« less

2002 Microgravity Materials Science Conference

NASA Technical Reports Server (NTRS)

Gillies, Donald (Editor); Ramachandran, Narayanan (Editor); Murphy, Karen (Editor); McCauley, Dannah (Editor); Bennett, Nancy (Editor)

2003-01-01

The 2002 Microgravity Materials Science Conference was held June 25-26, 2002, at the Von Braun Center, Huntsville, Alabama. Organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Physical Sciences Research Division, NASA Headquarters, and hosted by NASA Marshall Space Flight Center and member institutions under the Cooperative Research in Biology and Materials Science (CORBAMS) agreement, the conference provided a forum to review the current research and activities in materials science, discuss the envisioned long-term goals, highlight new crosscutting research areas of particular interest to the Physical Sciences Research Division, and inform the materials science community of research opportunities in reduced gravity. An abstracts book was published and distributed at the conference to the approximately 240 people attending, who represented industry, academia, and other NASA Centers. This CD-ROM proceedings is comprised of the research reports submitted by the Principal Investigators in the Microgravity Materials Science program.

A Virtual Reality Framework to Optimize Design, Operation and Refueling of GEN-IV Reactors.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rizwan-uddin; Nick Karancevic; Stefano Markidis

2008-04-23

many GEN-IV candidate designs are currently under investigation. Technical issues related to material, safety and economics are being addressed at research laboratories, industry and in academia. After safety, economic feasibility is likely to be the most important crterion in the success of GEN-IV design(s). Lessons learned from the designers and operators of GEN-II (and GEN-III) reactors must play a vital role in achieving both safety and economic feasibility goals.

Criteria for extending the operation periods of thermoelectric converters based on IV-VI compounds

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sadia, Yatir, E-mail: yatttir@yahoo.com; Ohaion-Raz, Tsion; Ben-Yehuda, Ohad

The recent energy demands affected by the dilution of conventional energy resources and the growing awareness of environmental considerations, had positioned the research of renewable energy conversion methods in general and of thermoelectric direct conversion of thermal into electrical energies in particular, in the forefront of the currently active applicative sciences. IV-VI thermoelectric compounds (e.g. GeTe, PbTe and SnTe) and their alloys comprise some of the most efficient thermoelectric compositions ever reported. Yet a proper utilization of such materials in practical thermoelectric devices, still requires an overcoming the so-called technological “valley of death”, including among others, transport properties' degradation, duemore » to sublimation of volatile Te rich species, while being subjected to elevated temperatures for long periods of time. In an attempt to establish practical operation criteria for extending the operation periods of such thermoelectric converters, it is currently shown based on thermal gravimetric and metallurgical considerations that such harmful sublimation can be practically bridged over by limiting the maximal operating temperatures to the 410–430 °C range for GeTe rich alloys and to 510–530 °C for PbTe and SnTe rich alloys, depending of the thermoelectric leg's diameter. - Graphical abstract: Evaporation rate in the GeTe and PbTe system showing the measured evaporation rates and the maximal operating temperatures for different compositions. In addition, the microstructure after evaporation is shown for PbTe, TAGS-85, and doped Pb{sub 0.13}Ge{sub 087}Te. Display Omitted - Highlights: • Evaporation rates of GeTe and PbTe based thermoelectric compounds were determined. • A criterion for their maximum operating temperature was established. • The materials showed phase separations and off-stoichiometry compositions.« less

40 CFR 63.1105 - Transfer racks.

Code of Federal Regulations, 2014 CFR

2014-07-01

... manner as a material that fulfills the same function in that process; (ii) Transformed by chemical reaction into materials that are not HAP; (iii) Incorporated into a product; and/or (iv) Recovered. (4...

40 CFR 63.1105 - Transfer racks.

Code of Federal Regulations, 2011 CFR

2011-07-01

... manner as a material that fulfills the same function in that process; (ii) Transformed by chemical reaction into materials that are not HAP; (iii) Incorporated into a product; and/or (iv) Recovered. (4...

40 CFR 63.1105 - Transfer racks.

Code of Federal Regulations, 2012 CFR

2012-07-01

... manner as a material that fulfills the same function in that process; (ii) Transformed by chemical reaction into materials that are not HAP; (iii) Incorporated into a product; and/or (iv) Recovered. (4...

40 CFR 63.1105 - Transfer racks.

Code of Federal Regulations, 2013 CFR

2013-07-01

... manner as a material that fulfills the same function in that process; (ii) Transformed by chemical reaction into materials that are not HAP; (iii) Incorporated into a product; and/or (iv) Recovered. (4...

41 CFR 61-250.2 - What definitions apply to this part?

Code of Federal Regulations, 2013 CFR

2013-07-01

... institutes and junior colleges, or through equivalent on-the-job training. Includes: Computer programmers and... (medical, dental, electronic, physical science), and kindred workers. (iv) Sales means occupations engaging...

41 CFR 61-250.2 - What definitions apply to this part?

Code of Federal Regulations, 2010 CFR

2010-07-01

... institutes and junior colleges, or through equivalent on-the-job training. Includes: Computer programmers and... (medical, dental, electronic, physical science), and kindred workers. (iv) Sales means occupations engaging...

41 CFR 61-250.2 - What definitions apply to this part?

Code of Federal Regulations, 2014 CFR

2014-07-01

... institutes and junior colleges, or through equivalent on-the-job training. Includes: Computer programmers and... (medical, dental, electronic, physical science), and kindred workers. (iv) Sales means occupations engaging...

41 CFR 61-250.2 - What definitions apply to this part?

Code of Federal Regulations, 2012 CFR

2012-07-01

... institutes and junior colleges, or through equivalent on-the-job training. Includes: Computer programmers and... (medical, dental, electronic, physical science), and kindred workers. (iv) Sales means occupations engaging...

41 CFR 61-250.2 - What definitions apply to this part?

Code of Federal Regulations, 2011 CFR

2011-07-01

... institutes and junior colleges, or through equivalent on-the-job training. Includes: Computer programmers and... (medical, dental, electronic, physical science), and kindred workers. (iv) Sales means occupations engaging...

75 FR 26025 - Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-10

... information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available either... materials, as provided in 40 CFR part 2. IV. Renewable Fuel Standard (RFS2) Program Amendments EPA is taking...

Perspectives of Survivors on Military Suicide Decedents’ Life Stressors and Male Gender Role Stress using the Male Gender Role Stressor Inventory (MGRSI)

DTIC Science & Technology

2013-03-26

Inventory (MGRSI) by Arlie Graham Sterling IV Master’s Thesis submitted to the faculty of the Department of Medical and Clinical...Gender Role Stress using the Male Gender Role Stressor Inventory (MGRSI) Name of Candidate: A. Graham Sterling IV Department of Medical and...MGRSI) Name ofCandicbte: LT.JG Arlie Grnham Sterling JV, Master of Science in Medical and Clinical Psychology, Date: 03/26/20 lJ Tl IESIS /\\ND

Sandia National Laboratories: Exceptional Service in the National Interest

Science.gov Websites

Electromagnetics Engineering Science Geoscience Materials Science Nanodevices & Microsystems Radiation Effects Electromagnetics Engineering Science Geoscience Materials Science Nanodevices & Microsystems Radiation Effects Geoscience Materials Science Nanodevices & Microsystems Radiation Effects & High Energy Density

Intravenous Fluid Therapy Course for the Licensed Practical Nurse. Instructor Guide.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This curriculum guide provides materials for a 10-unit intravenous (IV) therapy course for licensed practical nurses. Units contain from one to nine lessons. The first unit provides an introduction and orientation to the course. Subsequent units concern documentation, anatomy and physiology as applied to IV therapy, fundamental aspects of fluid…

Christian Ethics. A Teacher Information Bulletin for Division IV.

ERIC Educational Resources Information Center

Saskatchewan Dept. of Education, Regina.

Listed are print and audiovisual materials that support the "Curriculum Guide for Division IV: Christian Ethics" intended for use in grades 10, 11, and 12. The course is designed to help students articulate, reflect upon, and understand what they believe and practice. Cited in this resource manual are textbooks, teacher's guides,…

Transferable tight binding model for strained group IV and III-V heterostructures

NASA Astrophysics Data System (ADS)

Tan, Yaohua; Povolotskyi, Micheal; Kubis, Tillmann; Boykin, Timothy; Klimeck, Gerhard

Modern semiconductor devices have reached critical device dimensions in the range of several nanometers. For reliable prediction of device performance, it is critical to have a numerical efficient model that are transferable to material interfaces. In this work, we present an empirical tight binding (ETB) model with transferable parameters for strained IV and III-V group semiconductors. The ETB model is numerically highly efficient as it make use of an orthogonal sp3d5s* basis set with nearest neighbor inter-atomic interactions. The ETB parameters are generated from HSE06 hybrid functional calculations. Band structures of strained group IV and III-V materials by ETB model are in good agreement with corresponding HSE06 calculations. Furthermore, the ETB model is applied to strained superlattices which consist of group IV and III-V elements. The ETB model turns out to be transferable to nano-scale hetero-structure. The ETB band structures agree with the corresponding HSE06 results in the whole Brillouin zone. The ETB band gaps of superlattices with common cations or common anions have discrepancies within 0.05eV.

Multivariate Analysis for Quantification of Plutonium(IV) in Nitric Acid Based on Absorption Spectra

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lines, Amanda M.; Adami, Susan R.; Sinkov, Sergey I.

Development of more effective, reliable, and fast methods for monitoring process streams is a growing opportunity for analytical applications. Many fields can benefit from on-line monitoring, including the nuclear fuel cycle where improved methods for monitoring radioactive materials will facilitate maintenance of proper safeguards and ensure safe and efficient processing of materials. On-line process monitoring with a focus on optical spectroscopy can provide a fast, non-destructive method for monitoring chemical species. However, identification and quantification of species can be hindered by the complexity of the solutions if bands overlap or show condition-dependent spectral features. Plutonium (IV) is one example ofmore » a species which displays significant spectral variation with changing nitric acid concentration. Single variate analysis (i.e. Beer’s Law) is difficult to apply to the quantification of Pu(IV) unless the nitric acid concentration is known and separate calibration curves have been made for all possible acid strengths. Multivariate, or chemometric, analysis is an approach that allows for the accurate quantification of Pu(IV) without a priori knowledge of nitric acid concentration.« less

Synthesis and fluorescent properties of poly(arylpyrazoline)'s for organic-electronics

NASA Astrophysics Data System (ADS)

Vandana, T.; Ramkumar, V.; Kannan, P.

2016-08-01

The present work focuses on the synthesis and characterization of poly(arylchalcone)'s (PCH I-IV) by reacting acetone with various dialdehydes for the first time at below ambient temperature followed by cyclization with phenylhydrazinehydrochloride to yield luminescent poly(arylpyrazoline)'s (PPY I-IV). The synthesized polymers were characterized by standard techniques such as, GPC, SEM, TGA, FT-IR, 1H NMR, UV-Vis absorption and fluorescence spectroscopy, and electrochemical studies by cyclic voltammetry analyses. The Pyrazoline group hooked with different aryl donors such as benzene, thiophene, carbazole, triphenylamine, thus results a series of blue and green emitting materials. The obtained optical bandgap energy of the polymers (PPY I-IV) were 2.53, 3.41, 3.07, 3.10 eV respectively, suggest that all the polymers belongs to semiconducting category. The solvent effect of polymers was thoroughly studied and explained by Lippert-Mataga equation. The polymers I & IV display large degree of intra-molecular charge transfer in excited state evidenced from solvatochromic shift on the emission spectra. The obtained results demonstrate that they are promising materials for organic electronics applications.

NASA Microgravity Materials Science Conference

NASA Technical Reports Server (NTRS)

Szofran, Frank R. (Compiler); McCauley, D. (Compiler); Walker, C. (Compiler)

1996-01-01

The Microgravity Materials Science Conference was held June 10-11, 1996 at the Von Braun Civic Center in Huntsville, AL. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Science and Applications Division at NASA Headquarters, and hosted by the NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the second NASA conference of this type in the microgravity materials science discipline. The microgravity science program sponsored approximately 80 investigations and 69 principal investigators in FY96, all of whom made oral or poster presentations at this conference. The conference's purpose was to inform the materials science community of research opportunities in reduced gravity in preparation for a NASA Research Announcement (NRA) scheduled for release in late 1996 by the Microgravity Science and Applications Division at NASA Headquarters. The conference was aimed at materials science researchers from academia, industry, and government. A tour of the MSFC microgravity research facilities was held on June 12, 1996. This volume is comprised of the research reports submitted by the principal investigators after the conference and presentations made by various NASA microgravity science managers.

Identification of dipeptidyl peptidase-IV inhibitory peptides from mare whey protein hydrolysates.

PubMed

Song, J J; Wang, Q; Du, M; Ji, X M; Mao, X Y

2017-09-01

Inhibition of dipeptidyl peptidase-IV (DPP-IV) activity is a promising strategy for treatment of type 2 diabetes. In the current study, DPP-IV inhibitory peptides were identified from mare whey protein hydrolysates obtained by papain. The results showed that all the mare whey protein hydrolysates obtained at various hydrolysis durations possessed more potent DPP-IV inhibitory activity compared with intact whey protein. The 4-h hydrolysates showed the greatest DPP-IV inhibitory activity with half-maximal inhibitory concentration of 0.18 mg/mL. The 2 novel peptides from 4-h hydrolysate fractions separated by successive chromatographic steps were characterized by liquid chromatography-electrospray ionization tandem mass spectrometry. The novel peptides Asn-Leu-Glu-Ile-Ile-Leu-Arg and Thr-Gln-Met-Val-Asp-Glu-Glu-Ile-Met-Glu-Lys-Phe-Arg, which corresponded to β-lactoglobulin 1 f(71-77) and β-lactoglobulin 1 f(143-155), demonstrated DPP-IV inhibitory activity with half-maximal inhibitory concentrations of 86.34 and 69.84 μM, respectively. The DPP-IV inhibitory activity of the 2 peptides was retained or even improved after simulated gastrointestinal digestion in vitro. Our findings indicate that mare whey protein-derived peptides may possess potential as functional food ingredients in the management of type 2 diabetes. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

5 CFR 1312.5 - Authority to classify.

Code of Federal Regulations, 2010 CFR

2010-01-01

... staff and relating to the national security of the United States: (1) Top Secret and below: (i) Deputy... International Affairs. (iv) Associate Director for Natural Resources, Energy and Science. (2) Secret and below...

36 CFR 73.9 - World Heritage criteria.

Code of Federal Regulations, 2014 CFR

2014-07-01

... history, including the record of life, significant on-going geological processes in the development of... science or conservation. (2) In addition to the criteria in paragraphs (c)(1)(i) through (c)(1)(iv) of...

36 CFR 73.9 - World Heritage criteria.

Code of Federal Regulations, 2012 CFR

2012-07-01

... history, including the record of life, significant on-going geological processes in the development of... science or conservation. (2) In addition to the criteria in paragraphs (c)(1)(i) through (c)(1)(iv) of...

In situ antimicrobial behavior of materials with copper-based additives in a hospital environment.

PubMed

Palza, Humberto; Nuñez, Mauricio; Bastías, Roberto; Delgado, Katherine

2018-06-01

Copper and its alloys are effective antimicrobial surface materials in the laboratory and in clinical trials. Copper has been used in the healthcare setting to reduce environmental contamination, and thus prevent healthcare-associated infections, complementing traditional protocols. The addition of copper nanoparticles to polymer/plastic matrices can also produce antimicrobial materials, as confirmed under laboratory conditions. However, there is a lack of studies validating the antimicrobial effects of these nanocomposite materials in clinical trials. To satisfy this issue, plastic waiting room chairs with embedded metal copper nanoparticles, and metal hospital IV pools coated with an organic paint with nanostructured zeolite/copper particles were produced and tested in a hospital environment. These prototypes were sampled once weekly for 10 weeks and the viable microorganisms were analysed and compared with the copper-free materials. In the waiting rooms, chairs with copper reduced by around 73% the total viable microorganisms present, showing activity regardless of the microorganism tested. Although there were only low levels of microorganisms in the IV pools installed in operating rooms because of rigorous hygiene protocols, samples with copper presented lower total viable microorganisms than unfilled materials. Some results did not have statistical significance because of the low load of microorganisms; however, during at least three weeks the IV pools with copper had reduced levels of microorganisms by a statistically significant 50%. These findings show for the first time the feasibility of utilizing the antimicrobial property of copper by adding nanosized fillers to other materials in a hospital environment. Copyright © 2018 Elsevier B.V. and International Society of Chemotherapy. All rights reserved.

An Examination of the Science Curriculum As It Reflects Social/Industrial Change: A Proposal for Curriculum Involving Social Interactions and Utilitarian Outcomes.

ERIC Educational Resources Information Center

Seale, Thomas Scott

Chapter I of this master's thesis examines aspects of the changing lifestyle that was inaugerated by the Industrial and Scientific Revolutions. Chapter II picks up the transition in general schooling that accompanied the revolutions. Chapter III traces the role of the evolving science curricula in this transition. Chapter IV presents proposals…

Bridging the Ends and Means of the Responsibility to Protect: An Opportunity for U.S. Leadership

DTIC Science & Technology

2012-06-01

territory; (ix) Intentionally directing attacks against buildings dedicated to religion, education, art , science or charitable purposes, historic...objects under the international law of armed conflict; (iv) Intentionally directing attacks against buildings dedicated to religion, education, art ... science or charitable purposes, historic monuments, hospitals and places where the sick and wounded are collected, provided they are not military

Mostly Plants. Individualized Biology Activities on: I. Investigating Bread Mold; II. Transpiration; III. Botany Project; IV. Collecting/Preserving/Identifying Leaves; [and] V. Student Science Laboratory Write-Ups.

ERIC Educational Resources Information Center

Gibson, Paul R.

Individualized biology activities for secondary students are presented in this teaching guide. The guide is divided into five sections: (1) investigating bread mold; (2) investigating transpiration; (3) completing a botany project; (4) collecting, preserving, and identifying leaves; and (5) writing up science laboratory investigations. The…

Content, format, gender and grade level differences in elementary students' ability to read science materials as measured by the cloze procedure

NASA Astrophysics Data System (ADS)

Williams, Richard L.; Yore, Larry D.

Present instructional trends in science indicate a need to reexamine a traditional concern in science education: the readability of science textbooks. An area of reading research not well documented is the effect of color, visuals, and page layout on readability of science materials. Using the cloze readability method, the present study explored the relationships between page format, grade level, sex, content, and elementary school students ability to read science material. Significant relationships were found between cloze scores and both grade level and content, and there was a significant interaction effect between grade and sex in favor of older males. No significant relationships could be attributed to page format and sex. In the area of science content, biological materials were most difficult in terms of readability followed by earth science and physical science. Grade level data indicated that grade five materials were more difficult for that level than either grade four or grade six materials were for students at each respective level. In eight of nine cases, the science text materials would be classified at or near the frustration level of readability. The implications for textbook writers and publishers are that science reading materials need to be produced with greater attention to readability and known design principles regarding visual supplements. The implication for teachers is that students need direct instruction in using visual materials to increase their learning from text material. Present visual materials appear to neither help nor hinder the student to gain information from text material.

Direct variable cost of the topical treatment of stages III and IV pressure injuries incurred in a public university hospital.

PubMed

Chacon, Julieta M F; Blanes, Leila; Borba, Luis G; Rocha, Luis R M; Ferreira, Lydia M

2017-05-01

to estimate the direct variable costs of the topical treatment of stages III and IV pressure injuries of hospitalized patients in a public university hospital, and assess the correlation between these costs and hospitalization time. Forty patients of both sexes who had been admitted to the São Paulo Hospital, São Paulo, SP, Brazil, from 2011 to 2012, with pressure injuries in the sacral, ischial or trochanteric region were included. The patients had a total of 57 pressure injuries in the selected regions, and the lesions were monitored daily until patient release, transfer or death. The quantities and types of materials, as well as the amount of professional labor time spent on each procedure and each patient were recorded. The unit costs of the materials and the hourly costs of the professional labor were obtained from the hospital's purchasing and human resources departments, respectively. Spearman's correlation coefficient and the Mann-Whitney and Kruskal-Wallis tests were used for the statistical analyses. The mean topical treatment costs for stages III and IV PIs were significantly different (US$ 854.82 versus US$ 1785.35; p = 0.004). The mean topical treatment cost of stages III and IV pressure injuries per patient was US$ 1426.37. The mean daily topical treatment cost per patient was US$ 40.83. There was a significant correlation between hospitalization time and the total costs of labor and materials (p < 0.05). There was no significant difference between hospitalization time periods for stages III and IV pressure injuries (40.80 days and 45.01 days, respectively; p = 0.834). The mean direct variable cost of the topical treatment for stages III and IV pressure injuries per patient in this public university hospital was US$ 1426.37. Copyright © 2016. Published by Elsevier Ltd.

75 FR 9001 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-26

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and... Science and Engineering Centers Program, Division of Materials Research, Room 1065, National Science...

75 FR 4876 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-29

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and... Science and Engineering Centers Program, Division of Materials Research, Room 1065, National Science...

[The use of operational criteria for evaluations of mental competency].

PubMed

Kocha, Hiroki

2013-01-01

Today, either the DSM-IV or the ICD-10 is generally used for forensic purposes, especially for evaluations of mental competency. The use of operational criteria, such as the DSM-IV, in forensic settings has some risks. Here, these risks, as well as the advantages of operational criteria and precautions for their use, are discussed. Compared with the DSM-IV, the ICD-10 is preferred because this tool is less likely to complicate evaluations of the mental status of a criminal at the time of the crime when sufficient information is not available to make a diagnosis. The evaluation consists of two steps. The first step, which is based on empirical science, is to provide a psychiatric diagnosis. The second step, which is based on normative science, is to allocate the diagnosis to one of four categories of a forensic frame of reference and to provide useful information for judicial members to make a judgment about the mental competency of the criminal. To standardize evaluations, the use of not only global standard criteria, but also a general rule for the judgment of mental competency within each allocated category is needed.

46 CFR 182.720 - Nonmetallic piping materials.

Code of Federal Regulations, 2013 CFR

2013-10-01

... braid; (iv) Flexible hose used for alcohol-gasoline blend fuels must meet the permeability requirements...) and (d) of this section. (b) Flexible nonmetallic materials (hose) may be used in vital and non-vital... gasoline or diesel fuel systems. Flexible nonmetallic materials (hose) may be used where permitted by...

46 CFR 182.720 - Nonmetallic piping materials.

Code of Federal Regulations, 2011 CFR

2011-10-01

... braid; (iv) Flexible hose used for alcohol-gasoline blend fuels must meet the permeability requirements...) and (d) of this section. (b) Flexible nonmetallic materials (hose) may be used in vital and non-vital... gasoline or diesel fuel systems. Flexible nonmetallic materials (hose) may be used where permitted by...

46 CFR 182.720 - Nonmetallic piping materials.

Code of Federal Regulations, 2012 CFR

2012-10-01

... braid; (iv) Flexible hose used for alcohol-gasoline blend fuels must meet the permeability requirements...) and (d) of this section. (b) Flexible nonmetallic materials (hose) may be used in vital and non-vital... gasoline or diesel fuel systems. Flexible nonmetallic materials (hose) may be used where permitted by...

46 CFR 182.720 - Nonmetallic piping materials.

Code of Federal Regulations, 2014 CFR

2014-10-01

... braid; (iv) Flexible hose used for alcohol-gasoline blend fuels must meet the permeability requirements...) and (d) of this section. (b) Flexible nonmetallic materials (hose) may be used in vital and non-vital... gasoline or diesel fuel systems. Flexible nonmetallic materials (hose) may be used where permitted by...

46 CFR 182.720 - Nonmetallic piping materials.

Code of Federal Regulations, 2010 CFR

2010-10-01

... braid; (iv) Flexible hose used for alcohol-gasoline blend fuels must meet the permeability requirements...) and (d) of this section. (b) Flexible nonmetallic materials (hose) may be used in vital and non-vital... gasoline or diesel fuel systems. Flexible nonmetallic materials (hose) may be used where permitted by...

Materials sciences programs: Fiscal year 1994

NASA Astrophysics Data System (ADS)

1995-04-01

The Division of Materials Sciences is located within the DOE in the Office of Basic Energy Sciences. The Division of Materials Sciences is responsible for basic research and research facilities in strategic materials science topics of critical importance to the mission of the Department and its Strategic Plan. Materials Science is an enabling technology. The performance parameters, economics, environmental acceptability and safety of all energy generation, conversion, transmission and conservation technologies are limited by the properties and behavior of materials. The Materials Sciences programs develop scientific understanding of the synergistic relationship amongst the synthesis, processing, structure, properties, behavior, performance and other characteristics of materials. Emphasis is placed on the development of the capability to discover technologically, economically, and environmentally desirable new materials and processes, and the instruments and national user facilities necessary for achieving such progress. Materials Sciences sub-fields include physical metallurgy, ceramics, polymers, solid state and condensed matter physics, materials chemistry, surface science and related disciplines where the emphasis is on the science of materials. This report includes program descriptions for 458 research programs including 216 at 14 DOE National Laboratories, 242 research grants (233 for universities), and 9 Small Business Innovation Research (SBIR) Grants. The report is divided into eight sections. Section A contains all Laboratory projects, Section B has all contract research projects, Section C has projects funded under the SBIR Program, Section D describes the Center of Excellence for the Synthesis and Processing of Advanced Materials and E has information on major user facilities. F contains descriptions of other user facilities; G, a summary of funding levels; and H, indices characterizing research projects.

Materials sciences programs, fiscal year 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-04-01

The Division of Materials Sciences is located within the DOE in the Office of Basic Energy Sciences. The Division of Materials Sciences is responsible for basic research and research facilities in strategic materials science topics of critical importance to the mission of the Department and its Strategic Plan. Materials Science is an enabling technology. The performance parameters, economics, environmental acceptability and safety of all energy generation, conversion, transmission and conservation technologies are limited by the properties and behavior of materials. The Materials Sciences programs develop scientific understanding of the synergistic relationship amongst the synthesis, processing, structure, properties, behavior, performance andmore » other characteristics of materials. Emphasis is placed on the development of the capability to discover technologically, economically, and environmentally desirable new materials and processes, and the instruments and national user facilities necessary for achieving such progress. Materials Sciences sub-fields include physical metallurgy, ceramics, polymers, solid state and condensed matter physics, materials chemistry, surface science and related disciplines where the emphasis is on the science of materials. This report includes program descriptions for 458 research programs including 216 at 14 DOE National Laboratories, 242 research grants (233 for universities), and 9 Small Business Innovation Research (SBIR) Grants. The report is divided into eight sections. Section A contains all Laboratory projects, Section B has all contract research projects, Section C has projects funded under the SBIR Program, Section D describes the Center of Excellence for the Synthesis and Processing of Advanced Materials and E has information on major user facilities. F contains descriptions of other user facilities; G, a summary of funding levels; and H, indices characterizing research projects.« less

Surface Chemistry of Nano-Structured Mixed Metal Oxide Films

DTIC Science & Technology

2012-12-11

surface chemical and catalytic properties of the films, and finally (iv) we also investigated some of these materials as electrodes for the photo-oxidation of water and as anode materials for lithium ion batteries .

Recent progress in GeSn growth and GeSn-based photonic devices

NASA Astrophysics Data System (ADS)

Zheng, Jun; Liu, Zhi; Xue, Chunlai; Li, Chuanbo; Zuo, Yuhua; Cheng, Buwen; Wang, Qiming

2018-06-01

The GeSn binary alloy is a new group IV material that exhibits a direct bandgap when the Sn content exceeds 6%. It shows great potential for laser use in optoelectronic integration circuits (OEIC) on account of its low light emission efficiency arising from the indirect bandgap characteristics of Si and Ge. The bandgap of GeSn can be tuned from 0.6 to 0 eV by varying the Sn content, thus making this alloy suitable for use in near-infrared and mid-infrared detectors. In this paper, the growth of the GeSn alloy is first reviewed. Subsequently, GeSn photodetectors, light emitting diodes, and lasers are discussed. The GeSn alloy presents a promising pathway for the monolithic integration of Si photonic circuits by the complementary metal–oxide–semiconductor (CMOS) technology. Project supported by the Beijing Natural Science Foundation (No. 4162063) and the Youth Innovation Promotion Association of CAS (No. 2015091).

How do microclimate factors affect the risk for superficial pressure ulcers: a mathematical modeling study.

PubMed

Gefen, Amit

2011-08-01

In this study, a mathematical model is developed for analyzing the effects of the microclimate on skin tolerance to superficial pressure ulcers (SPUs). The modeling identified the following factors as such that decrease the tolerance of skin to SPUs: (i) increase in the skin temperature, (ii) increase in the ambient temperature, (iii) increase in the relative humidity, (iv) increase in the skin-support (or skin-clothing-support) contact pressures, and (v) decrease in permeabilities of the materials contacting the skin or being close to it, e.g. the covering sheet of the support and clothing. The modeling is consistent with relevant empirical findings and clinical observations documented in the literature, explains them from a basic science aspect, and can be further developed for design of interventions, safer patient clothing and supports that consider the optimization of microclimate factors. Copyright © 2010 Tissue Viability Society. Published by Elsevier Ltd. All rights reserved.

Analytical Microscopy and Imaging Science | Materials Science | NREL

Science.gov Websites

Microanalysis (EPMA) for quantitative compositional analysis. It relies on wavelength-dispersive spectroscopy to Science group in NREL's Materials Science Center. Mowafak Al-Jassim Group Manager Dr. Al-Jassim manages the Analytical Microscopy and Imaging Science group with the Materials Science Center. Email | 303-384

Excitonic states and defect physics of two-dimensional group-IV monochalcogenides.

NASA Astrophysics Data System (ADS)

Gomes, Lidia; Carvalho, Alexandra; Trevisanutto, Paolo; Rodin, Aleksandr; Neto, Antonio

Layered group-IV monochalcogenides have become an important group of materials within the ever-growing family of two-dimensional crystals. Among the binary IV-VI compounds, SnS, SnSe, GeS, and GeSe form a subgroup with orthorhombic structure which has shown exciting particularities and has been considered of high potential for numerous application. We give a brief overview of some important properties of the 2D form of this group and focus on recent results addressing the excitonic properties and the impact of the introduction of point defects on their structures. Vacancies and oxygen defects are modeled using first principles calculations. Energetic and structural analysis of five different models for chemisorbed oxygen atoms, reveals a better resistance of these materials to oxidation if compared to their isostructural partner, phosphorene. We also discuss a parallel work where quasi-particle band structure and excitonic properties of GeS and GeSe monolayers are investigated through ab initio GW and Bethe-Salpeter equation calculations. Within the main results, we show that the optical spectra of both materials are dominated by excitonic effects, however, GeS presents a remarkably larger binding energy of 1 eV. NRF-CRP award Novel 2D materials with tailored properties: beyond graphene (R-144-000-295-281) 1.

Does intravenous contrast-enhanced computed tomography cause acute kidney injury? Protocol of a systematic review of the evidence

PubMed Central

2014-01-01

Background Contrast-induced acute kidney injury is a common cause of iatrogenic acute kidney injury (AKI). Most of the published estimates of AKI after contrast use originate from the cardiac catheterization literature despite contrast-enhanced computed tomography (CT) scans being the more common setting for contrast use. This systematic review aims to summarize the current evidence about (1)the risk of AKI following intravenous (IV) contrast-enhanced CT scans and(2) the risk of clinical outcomes (i.e. death, hospitalization and need for renal replacement therapy) due to IV contrast-enhanced CT scans. Methods/Design A systematic literature search for published studies will be performed using MEDLINE, EMBASE and The COCHRANE Library databases. Unpublished studies will be identified by searching through grey literature. No language restriction will be applied. The review will consider all studies that have examined the association between IV contrast media and AKI. To be selected, the study should include two arms: one group of exposed patients who received IV contrast material before CT scans and one group of unexposed group who did not receive contrast material before CT scans. Two authors will independently screen titles and abstracts obtained from electronic databases, extract data and will assess the quality of the studies selected using the Cochrane's ‘Risk of Bias’ assessment tool for randomized trials and the Newcastle-Ottawa Scale for observational studies. A random-effects meta-analysis will be performed if there is no remarkable heterogeneity between studies. Discussion This systematic review will provide synthesis of current evidence around the effect of IV contrast material on AKI and other clinical outcomes. Results will be helpful for making evidence-based recommendations and guidelines for clinical and radiologic settings. Systematic review registration PROSPERO CRD42013003799. PMID:25148933

Don Young | NREL

Science.gov Websites

Don Young Don Young Professional IV-ESH Don.Young@nrel.gov | 303-384-7144 Don Young is an EHS Professional at the NWTC. He received his B.S. from Colorado State University in Biological Science before

Especially for High School Teachers

NASA Astrophysics Data System (ADS)

Howell, J. Emory

1998-05-01

* Low-Cost Science Teaching Equipment for Visually Impaired Children, by. H.O. Gupta and Rakshpal Singh, p 610. * Synthesis of Exotic Soaps in the Chemistry Laboratory, by Otto Phanstiel IV, Eric Dueno, and Queenie Xianghong Wang, p 612.

Science in a Box. Magnets IV: Magnet Earth.

ERIC Educational Resources Information Center

Blizard, Elizabeth B.

1992-01-01

Presents low-cost learning activities to help teach elementary students about the earth's magnetic field. One project has students make a model of the earth's magnetic field. Another has them experiment with magnetism. (SM)

The Center for Nanophase Materials Sciences

DOE Office of Scientific and Technical Information (OSTI.GOV)

Christen, Hans; Ovchinnikova, Olga; Jesse, Stephen

2016-03-11

The Center for Nanophase Materials Sciences (CNMS) at Oak Ridge National Laboratory (ORNL) integrates nanoscale science with neutron science; synthesis science; and theory, modeling, and simulation. Operating as a national user facility, the CNMS supports a multidisciplinary environment for research to understand nanoscale materials and phenomena.

The Center for Nanophase Materials Sciences

ScienceCinema

Christen, Hans; Ovchinnikova, Olga; Jesse, Stephen; Mazumder, Baishakhi; Norred, Liz; Idrobo, Juan Carlos; Berlijn, Tom

2018-06-25

The Center for Nanophase Materials Sciences (CNMS) at Oak Ridge National Laboratory (ORNL) integrates nanoscale science with neutron science; synthesis science; and theory, modeling, and simulation. Operating as a national user facility, the CNMS supports a multidisciplinary environment for research to understand nanoscale materials and phenomena.

Optical Sensing And Imaging Opportunities

DTIC Science & Technology

2016-02-12

Functional Materials Workshops, supported by AFOSR.Potentially Useful New Research Areas.- Plasmonics - Infrared antennae- IV-VI (lead salt) Infrared Photo...Potentially Useful New Research Areas. - Plasmonics - Infrared antennae - IV-VI (lead salt) Infrared Photo Detectors and Focal Plane Arrays...Hexagonal Ferrite Thin Films for Q-Band Signal Processing Devices Plasmonics New techniques for transmitting optical signals through nano-scale

Collecting and Interpreting Qualitative Materials. Third Edition

ERIC Educational Resources Information Center

Denzin, Norman K., Ed.; Lincoln, Yvonna, Ed.

2007-01-01

This book is the third volume of the paperback versions of "The SAGE Handbook of Qualitative Research, Third Edition." This portion of the handbook considers the tasks of collecting, analyzing, and interpreting empirical materials, and comprises the Handbook's Parts IV ("Methods of Collecting and Analyzing Empirical Materials") and V ("The Art and…

10 CFR 20.2201 - Reports of theft or loss of licensed material.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Section 20.2201 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Reports... material involved; and (iv) Exposures of individuals to radiation, circumstances under which the exposures... material. (2) Reports must be made as follows: (i) For holders of an operating license for a nuclear power...

10 CFR 20.2201 - Reports of theft or loss of licensed material.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Section 20.2201 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Reports... material involved; and (iv) Exposures of individuals to radiation, circumstances under which the exposures... material. (2) Reports must be made as follows: (i) For holders of an operating license for a nuclear power...

10 CFR 20.2201 - Reports of theft or loss of licensed material.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Section 20.2201 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Reports... material involved; and (iv) Exposures of individuals to radiation, circumstances under which the exposures... material. (2) Reports must be made as follows: (i) For holders of an operating license for a nuclear power...

10 CFR 20.2201 - Reports of theft or loss of licensed material.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Section 20.2201 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Reports... material involved; and (iv) Exposures of individuals to radiation, circumstances under which the exposures... material. (2) Reports must be made as follows: (i) For holders of an operating license for a nuclear power...

10 CFR 20.2201 - Reports of theft or loss of licensed material.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Section 20.2201 Energy NUCLEAR REGULATORY COMMISSION STANDARDS FOR PROTECTION AGAINST RADIATION Reports... material involved; and (iv) Exposures of individuals to radiation, circumstances under which the exposures... material. (2) Reports must be made as follows: (i) For holders of an operating license for a nuclear power...

Materials @ LANL: Solutions for National Security Challenges

NASA Astrophysics Data System (ADS)

Teter, David

2012-10-01

Materials science activities impact many programmatic missions at LANL including nuclear weapons, nuclear energy, renewable energy, global security and nonproliferation. An overview of the LANL materials science strategy and examples of materials science programs will be presented. Major materials leadership areas are in materials dynamics, actinides and correlated electron materials, materials in radiation extremes, energetic materials, integrated nanomaterials and complex functional materials. Los Alamos is also planning a large-scale, signature science facility called MaRIE (Matter Radiation Interactions in Extremes) to address in-situ characterization of materials in dynamic and radiation environments using multiple high energy probes. An overview of this facility will also be presented.

Biological issues in materials science and engineering: Interdisciplinarity and the bio-materials paradigm

NASA Astrophysics Data System (ADS)

Murr, L. E.

2006-07-01

Biological systems and processes have had, and continue to have, important implications and applications in materials extraction, processing, and performance. This paper illustrates some interdisciplinary, biological issues in materials science and engineering. These include metal extraction involving bacterial catalysis, galvanic couples, bacterial-assisted corrosion and degradation of materials, biosorption and bioremediation of toxic and other heavy metals, metal and material implants and prostheses and related dental and medical biomaterials developments and applications, nanomaterials health benefits and toxicity issue, and biomimetics and biologically inspired materials developments. These and other examples provide compelling evidence and arguments for emphasizing biological sicences in materials science and engineering curricula and the implementation of a bio-materials paradigm to facilitate the emergence of innovative interdisciplinarity involving the biological sciences and materials sciences and engineering.

Materials Science & Engineering | Classification | College of Engineering &

Science.gov Websites

ChairMaterials Science and Engineering(414) 229-2668nidal@uwm.eduEng & Math Sciences E351 profile photo (414) 229-2615jhchen@uwm.eduEng & Math Sciences 1225 profile photo Benjamin Church, Ph.D.Associate ProfessorMaterials Science & Engineering(414) 229-2825church@uwm.eduEng & Math Sciences EMS 1175 profile

77 FR 61432 - Proposal Review for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-09

... NATIONAL SCIENCE FOUNDATION Proposal Review for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and... Director, Materials Research Science and Engineering Centers Program, Division of Materials Research, Room...

An Extensible NetLogo Model for Visualizing Message Routing Protocols

DTIC Science & Technology

2017-08-01

the hard sciences to the social sciences to computer-generated art. NetLogo represents the world as a set of...describe the model is shown here; for the supporting methods , refer to the source code. Approved for public release; distribution is unlimited. 4 iv...if ticks - last-inject > time-to-inject [inject] if run# > #runs [stop] end Next, we present some basic statistics collected for the

Detecting Target Data in Network Traffic

DTIC Science & Technology

2017-03-01

COMPUTER SCIENCE from the NAVAL POSTGRADUATE SCHOOL March 2017 Approved by: Michael McCarrin Thesis Co-Advisor Robert Beverly Thesis Co-Advisor Peter...Denning Chair, Department of Computer Science iii THIS PAGE INTENTIONALLY LEFT BLANK iv ABSTRACT Data exfiltration over a n etwork p oses a t hreat...phone. Further, Guri et al. were able to use these GSM frequencies to obtain information from a desktop computer by manipulating memory to produce GSM

A New Direction for the NASA Materials Science Research Using the International Space Station

NASA Technical Reports Server (NTRS)

Schlagheck, Ronald A.; Stinson, Thomas N. (Technical Monitor)

2002-01-01

In 2001 NASA created a fifth Strategic Enterprise, the Office of Biological and Physical Research (OBPR), to bring together physics, chemistry, biology, and engineering to foster interdisciplinary research. The Materials Science Program is one of five Microgravity Research disciplines within this new Enterprise's Division of Physical Sciences Research. The Materials Science Program will participate within this new enterprise structure in order to facilitate effective use of ISS facilities, target scientific and technology questions and transfer results for Earth benefits. The Materials Science research will use a low gravity environment for flight and ground-based research in crystallization, fundamental processing, properties characterization, and biomaterials in order to obtain fundamental understanding of various phenomena effects and relationships to the structures, processing, and properties of materials. Completion of the International Space Station's (ISS) first major assembly, during the past year, provides new opportunities for on-orbit research and scientific utilization. The Enterprise has recently completed an assessment of the science prioritization from which the future materials science ISS type payloads will be implemented. Science accommodations will support a variety of Materials Science payload hardware both in the US and international partner modules with emphasis on early use of Express Rack and Glovebox facilities. This paper addresses the current scope of the flight and ground investigator program. These investigators will use the various capabilities of the ISS lab facilities to achieve their research objectives. The type of research and classification of materials being studied will be addressed. This includes the recent emphasis being placed on radiation shielding, nanomaterials, propulsion materials, and biomaterials type research. The Materials Science Program will pursue a new, interdisciplinary approach, which contributes, to Human Space Flight Exploration research. The Materials Science Research Facility (MSRF) and other related American and International experiment modules will serve as the foundation for the flight research environment. A summary will explain the concept for materials science research processing capabilities aboard the ISS along with the various ground facilities necessary to support the program.

77 FR 61433 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-09

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and..., Program Director, Materials Research Science and Engineering Centers Program, Division of Materials...

77 FR 56236 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-12

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and... Director, Materials Research Science and Engineering Centers Program, Division of Materials Research, Room...

77 FR 6826 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-09

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and..., Program Director, Materials Research Science and Engineering Centers Program, Division of Materials...

77 FR 57162 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-17

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and... Director, Materials Research Science and Engineering Centers Program, Division of Materials Research, Room...

77 FR 14441 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-09

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and..., Materials Research Science and Engineering Centers Program, Division of Materials Research, Room 1065...

Applications of statistics to medical science, IV survival analysis.

PubMed

Watanabe, Hiroshi

2012-01-01

The fundamental principles of survival analysis are reviewed. In particular, the Kaplan-Meier method and a proportional hazard model are discussed. This work is the last part of a series in which medical statistics are surveyed.

The Political Role of Officers

DTIC Science & Technology

2015-06-12

fulfillment of the requirements for the degree MASTER OF MILITARY ART AND SCIENCE General Studies by BERTRAND EPSTEIN, MAJOR...other governmental agency. (References to this study should include the foregoing statement.) iv ABSTRACT THE POLITICAL ROLE OF OFFICERS, by

Technetium incorporation into goethite (α-FeOOH): An atomic-scale investigation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Frances N.; Taylor, Christopher D.; Um, Wooyong

2015-11-17

During the processing of low-activity radioactive waste to generate solid waste forms (e.g., glass), technetium-99 (Tc) is of concern because of its volatility. A variety of materials are under consideration to capture Tc from waste streams, including the iron oxyhydroxide, goethite (α-FeOOH), which was experimentally shown to sequester Tc(IV). This material could ultimately be incorporated into glass or other low-temperature waste form matrices. However, questions remain regarding the incorporation mechanism for Tc(IV) in goethite, which has implications for predicting the long-term stability of Tc in waste forms under changing conditions. Here, quantum-mechanical calculations were used to evaluate the energy ofmore » five different charge-compensated Tc(IV) incorporation scenarios in goethite. The two most stable incorporation mechanisms involve direct substitution of Tc(IV) onto Fe(III) lattice sites and charge balancing either by removing one nearby H+ (i.e., within 5 Å), or by creating an Fe(III) vacancy when substituting 3 Tc(IV) for 4 Fe(III), with the former being preferred over the latter relative to gas-phase ions. When corrections for hydrated references phases are applied, the Fe(III)-vacancy mechanism becomes more energetically competitive. Calculated incorporation energies and optimized bond-lengths are presented. Proton movement is observed to satisfy under-coordinated bonds surrounding vacancies in the goethite structure.« less

Novel N-substituted aminobenzamide scaffold derivatives targeting the dipeptidyl peptidase-IV enzyme.

PubMed

Al-Balas, Qosay A; Sowaileh, Munia F; Hassan, Mohammad A; Qandil, Amjad M; Alzoubi, Karem H; Mhaidat, Nizar M; Almaaytah, Ammar M; Khabour, Omar F

2014-01-01

The dipeptidyl peptidase-IV (DPP-IV) enzyme is considered a pivotal target for controlling normal blood sugar levels in the body. Incretins secreted in response to ingestion of meals enhance insulin release to the blood, and DPP-IV inactivates these incretins within a short period and stops their action. Inhibition of this enzyme escalates the action of incretins and induces more insulin to achieve better glucose control in diabetic patients. Thus, inhibition of this enzyme will lead to better control of blood sugar levels. In this study, computer-aided drug design was used to help establish a novel N-substituted aminobenzamide scaffold as a potential inhibitor of DPP-IV. CDOCKER software available from Discovery Studio 3.5 was used to evaluate a series of designed compounds and assess their mode of binding to the active site of the DPP-IV enzyme. The designed compounds were synthesized and tested against a DPP-IV enzyme kit provided by Enzo Life Sciences. The synthesized compounds were characterized using proton and carbon nuclear magnetic resonance, mass spectrometry, infrared spectroscopy, and determination of melting point. Sixty-nine novel compounds having an N-aminobenzamide scaffold were prepared, with full characterization. Ten of these compounds showed more in vitro activity against DPP-IV than the reference compounds, with the most active compounds scoring 38% activity at 100 μM concentration. The N-aminobenzamide scaffold was shown in this study to be a valid scaffold for inhibiting the DPP-IV enzyme. Continuing work could unravel more active compounds possessing the same scaffold.

New porphyrin-polyoxometalate hybrid materials: synthesis, characterization and investigation of catalytic activity in acetylation reactions.

PubMed

Araghi, Mehdi; Mirkhani, Valiollah; Moghadam, Majid; Tangestaninejad, Shahram; Mohammdpoor-Baltork, Iraj

2012-10-14

New hybrid complexes based on covalent interaction between 5,10,15,20-tetrakis(4-aminophenyl)porphyrinatozinc(II) and 5,10,15,20-tetrakis(4-aminophenyl)porphyrinatotin(IV) chloride, and a Lindqvist-type polyoxometalate, Mo(6)O(19)(2-), were prepared. These new porphyrin-polyoxometalate hybrid materials were characterized by (1)H NMR, FT IR and UV-Vis spectroscopic methods and cyclic voltammetry. These spectro- and electrochemical studies provided several spectral data for synthesis of these compounds. Cyclic voltammetry showed the influence of the polyoxometalate on the redox process of the porphyrin ring. The catalytic activity of tin(IV)porphyrin-hexamolybdate hybrid material was investigated in the acetylation of alcohols and phenols with acetic anhydride. The reusability of this catalyst was also investigated.

Mapping the Materials Genome through Combinatorial Informatics

NASA Astrophysics Data System (ADS)

Rajan, Krishna

2012-02-01

The recently announced White House Materials Genome Initiative provides an exciting challenge to the materials science community. To meet that challenge one needs to address a critical question, namely what is the materials genome? Some guide on how to the answer this question can be gained by recognizing that a ``gene'' is a carrier of information. In the biological sciences, discovering how to manipulate these genes has generated exciting discoveries in fundamental molecular biology as well as significant advances in biotechnology. Scaling that up to molecular, cellular length scales and beyond, has spawned from genomics, fields such as proteomics, metabolomics and essentially systems biology. The ``omics'' approach requires that one needs to discover and track these ``carriers of information'' and then correlate that information to predict behavior. A similar challenge lies in materials science, where there is a diverse array of modalities of materials ``discovery'' ranging from new materials chemistries and molecular arrangements with novel properties, to the development and design of new micro- and mesoscale structures. Hence to meaningfully adapt the spirit of ``genomics'' style research in materials science, we need to first identify and map the ``genes'' across different materials science applications On the experimental side, combinatorial experiments have opened a new approach to generate data in a high throughput manner, but without a clear way to link that to models, the full value of that data is not realized. Hence along with experimental and computational materials science, we need to add a ``third leg'' to our toolkit to make the ``Materials Genome'' a reality, the science of Materials Informatics. In this presentation we provide an overview of how information science coupled to materials science can in fact achieve the goal of mapping the ``Materials Genome''.

78 FR 11903 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-20

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site Visit review of the Materials Research Science and... Structures Materials Research Science and Engineering Center, by NSF Division of Materials Research (DMR...

A Bibliography of Navajo and Native American Teaching Materials = Dine K'eeji Naaltsoos Bee Nida'nitinigii. Revised Edition.

ERIC Educational Resources Information Center

McCarty, T. L., Comp.; And Others

A revised annotated bibliography of Navajo and Native American teaching materials published between 1910 and 1982 (most from 1970 to 1982), compiled as part of the Title IV-B Navajo Materials Development Project, lists resources for teachers of Navajo and other Native American students. Most citations are of written materials, although some…

17 CFR 230.167 - Communications in connection with certain registered offerings of asset-backed securities.

Code of Federal Regulations, 2011 CFR

2011-04-01

... § 230.415, ABS informational and computational material regarding such securities used after the... informational and computational material used in reliance on Securities Act Rule 167 (§ 230.167); and (iv) A...

17 CFR 230.167 - Communications in connection with certain registered offerings of asset-backed securities.

Code of Federal Regulations, 2013 CFR

2013-04-01

... § 230.415, ABS informational and computational material regarding such securities used after the... informational and computational material used in reliance on Securities Act Rule 167 (§ 230.167); and (iv) A...

17 CFR 230.167 - Communications in connection with certain registered offerings of asset-backed securities.

Code of Federal Regulations, 2012 CFR

2012-04-01

... § 230.415, ABS informational and computational material regarding such securities used after the... informational and computational material used in reliance on Securities Act Rule 167 (§ 230.167); and (iv) A...

17 CFR 230.167 - Communications in connection with certain registered offerings of asset-backed securities.

Code of Federal Regulations, 2014 CFR

2014-04-01

... § 230.415, ABS informational and computational material regarding such securities used after the... informational and computational material used in reliance on Securities Act Rule 167 (§ 230.167); and (iv) A...

Scientific Assessment of the Effects of Global Change on the United States: A Report of the Committee on Environment and Natural Resources, National Science and Technology Council

DTIC Science & Technology

2008-05-01

Combined heating and cooling 186 V.7.b Energy production and distribution 187 Fossil and nuclear energy 190 Renewable energy 191 Extreme events 193...Period’) and a relatively cold period (or ‘Little Ice Age ’) centered around 1700 are evident. (Figure IV.6 shows the aggregate results from several...warming leading out of ice ages (NRC, 2002). IV. Trends and Projections of Global Environmental Change 95 • Greenhouse warming and other human

Distribution of Collagen I, III, and IV and Laminin in the Human Liver during Prenatal Development.

PubMed

Jović, Marko; Nikolić, Ivan; Todorović, Vera; Petrović, Aleksandar; Petrović, Vladimir; Mojsilović, Marijola; Denčić, Tijana

2018-06-27

In the absence of systematized data on the extracellular matrix components during prenatal liver development, the present study aimed to investigate the time of appearance and distribution of collagen types I, III, and IV and laminin. The study material included embryonic and fetal livers, aged 7-37 weeks, categorized into 3 trimesters. The material was stained using hematoxylin-eosin and immunohistochemistry methods for the identification of collagen I, III, and IV and laminin. Collagen I was detected near the end of the first trimester in the capsules and walls of interlobular veins. As the liver matures, collagen I is increasingly abundant in the capsules, portal area connective tissues, arterial walls, interlobular veins, sinusoids, and central veins. Collagen III and collagen IV appear in the middle of the first trimester in the capsules, portal areas, and walls of central veins, as well as the sinusoids particularly. In trimesters 2 and 3, these collagens are increasingly present in all the structures, but collagen IV is also present in nerve fibers. Laminin is sporadically present adjacent to the sinusoids in trimester 1, while in trimesters 2 and 3 this protein commonly appears in the walls of arteries and interlobular veins, in the basal membrane of bile ducts, and in nerve fibers. The contents of collagen I, III, and IV increase during prenatal development in the liver capsule, arterial and vein walls, sinusoids, and portal area. Laminin expression is consistent with that of the collagens with the exception that, within lobules, laminin disappears with liver maturation. © 2018 S. Karger AG, Basel.

Power Pacs for Teaching Home Economics Related Science and Math.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Vocational Education.

This guide contains materials designed to assist teachers and students in home economics related courses with mastery of job-related mathematics, science, and behavioral science. The 40 Power Pacs are divided into mathematics (16 Power Pacs), science (15), and behavioral science (9). Each Power Pac contains teacher materials and student materials.…

University of Maryland MRSEC - Education: Resources

Science.gov Websites

. University of Maryland Materials Research Science and Engineering Center Home About Us Leadership Moments in MSE The Materials Science and Engineering Career Resources Center Materials Research Society Central Super Science Fair Projects: Ideas, Topics, & Experiments All Science Fair Projects Science

Structure and Thermal Behavior of CO2-IV at 18 GPa from 300-625 K

NASA Astrophysics Data System (ADS)

Palaich, S.; Tulk, C. A.; Molaison, J. J.; Makhluf, A. R.; Guthrie, M.; Kavner, A.; Manning, C. E.

2014-12-01

The study of the structure of solid CO2 at elevated pressures is important in condensed matter physics and material science, as well as geophysics—especially in understanding the structure of the interiors of planetary bodies. The high-pressure phases, including CO2-IV, and their stability between CO2-I (dry ice, the CO2 phase stable at ambient P,T) and polyhedrally bonded CO2-V are poorly characterized. Yoo et al. (2001, PRL, 86, 3) and Park et al. (2003, Phys Rev B, 68,1) concluded that the CO2 molecule is bent in phase IV, with C=O bond lengths of up to 1.3-1.5 Å, longer than the 1.168 Å in CO2-I. In contrast, Gorelli et al. (2004, PRL, 93, 20) and Datchi et al. (2009, PRL, 103, 18) inferred that the CO2 molecule in phase IV is linear, and the double-bond length is nearly identical to that of CO2-I. The studies also disagree on the structure of CO2-IV: tetragonal P41212, orthorhombic Pbcn and rhombohedral R-3c have all been reported. We performed neutron diffraction experiments at SNAP, Spallation Neutron Source, ORNL. The powder sample was pressurized to 18.0(2) GPa at ambient temperature in a panoramic DAC. The resistive heating system was then heated to 625 K. Temperature was adjusted to 525 K, 450 K, 375 K and 300 K to study the thermal expansion of CO2-IV and provide data for a P,T equation of state. At 18 GPa and 625 K the structure of CO2-IV is well indexed by the R-3c structure found by Datchi et al. (2009, PRL, 103, 18). The rhombohedral symmetry was retained as temperature was lowered through the proposed stability fields of both CO2-II and CO2-III to 300 K. Structure determination yielded aH = 8.532(6) Å, cH = 10.48(2) Å, V = 660.9(3) Å3, and ρ = 2.653 g cm-3 at 300 K and 18 GPa. Preliminary linear thermal expansion parameters using the Holland-Powell (1998, J Metamorph Geol, 16, 3) model range from 5.7(6) x 10-6 K-1 to 1.39(1) x 10-5 K-1 for the lattice planes indexed. A fit to the volume yields a thermal expansion of 3.530(2) x 10-5 K-1. These results indicate that CO2-IV is comprised of linear molecules, supporting the structure determined by Datchi et al. (2009). Furthermore, phases II and III were not observed, suggesting that these phases are metastable at these conditions. These insights help us to more fully understand the behavior of CO2 at high P,T in Earth and planetary bodies.

Information Security Program Regulation

DTIC Science & Technology

1986-06-01

above. When an alarmed area is used for the storage of Top Secret material, the physical barrier must be adequate to prevent (a) surreptitious removal ...IV-9 4-304 Removable ADP and Word Processing Storage Media ---------- IV-10 4-305 Documents Produced by ADP Equipment...with a removal or cancellation of the classification designation. 1-315 Declassification Event An event that eliminates the need for continued

Health Occupations Education I. Module No. IV-A to IV-F.

ERIC Educational Resources Information Center

Dunmeyer, Kathryn; And Others

This set of 6 modules on patient body mechanics is 1 of 11 sets in the Health Occupations Education I instructional package for the first year of a 2-year course of study. The materials are designed to prepare students through individualized instruction for entry-level job opportunities on health care teams in a variety of practice settings. Each…

Learn Japanese--Elementary School Text, Volume IV.

ERIC Educational Resources Information Center

Sato, Yaeko; And Others

Volume IV of this series is the second semester program for level two students. New materials are combined with some of the vocabulary and structural points introduced in the first three volumes to present a meaningful and interesting dialog for each lesson. (See ED 019 666, AL 001 718 and AL 001 743 for Volumes I, II, and III.) This text, a…

Materials Requirements for Advanced Energy Systems - New Fuels. Volume 3: Materials Research Needs in Advanced Energy Systems Using New Fuels

DTIC Science & Technology

1974-07-01

elec- Materials se: trode materials and associ- operational ated conductors. 2.5.1 General. H" (02) Materials resources Technoeconomic analysis - None...Advanced Energy Systems Using New Fnels VIII Correlation and Analysis of Materials Requirements IX Research Recommendations and Priorities The authois...of government and industrial organizal ions who gave us the benefit of their knowledge and experience. iv VIII CORRELATION ANU ANALYSIS OF MATERIALS

Site Environmental Report for Calendar Year 2004. DOE Operations at The Boeing Company Santa Susana Field Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Ning; Rutherford, Phil; Lee, Majelle

2005-09-01

This Annual Site Environmental Report (ASER) for 2004 describes the environmental conditions related to work performed for the Department of Energy (DOE) at Area IV of Boeing’s Santa Susana Field Laboratory (SSFL). In the past, the Energy Technology Engineering Center (ETEC), a government-owned, company-operated test facility, was located in Area IV. The operations in Area IV included development, fabrication, and disassembly of nuclear reactors, reactor fuel, and other radioactive materials. Other activities in the area involved the operation of large-scale liquid metal facilities that were used for testing non-nuclear liquid metal fast breeder components. All nuclear work was terminated inmore » 1988; all subsequent radiological work has been directed toward decontamination and decommissioning (D&D) of the former nuclear facilities and their associated sites. Closure of the liquid metal test facilities began in 1996. Results of the radiological monitoring program for the calendar year 2004 continue to indicate that there are no significant releases of radioactive material from Area IV of SSFL. All potential exposure pathways are sampled and/or monitored, including air, soil, surface water, groundwater, direct radiation, transfer of property (land, structures, waste), and recycling.« less

High performance preconcentration of inorganic Se species by dispersive micro-solid phase extraction with a nanosilica-ionic liquid hybrid material

NASA Astrophysics Data System (ADS)

Llaver, Mauricio; Coronado, Eduardo A.; Wuilloud, Rodolfo G.

2017-12-01

A highly sensitive and efficient dispersive micro-solid phase extraction (D-μ-SPE) method was developed for inorganic Se speciation analysis. A novel ionic liquid (IL)-nanomaterial hybrid consisting of 1-dodecyl-3-methylimidazolium bromide-functionalized nanosilica was used for the efficient retention of Se(IV) complexed with ammonium pyrrolidine dithiocarbamate, followed by elution with an ethyl acetate/Triton X-114 mixture and determination by electrothermal atomic absorption spectroscopy. The Se(VI) species was selectively determined by difference between total inorganic Se and Se(IV) after pre-reduction. The IL-nanomaterial hybrid was characterized by Fourier transform infrared spectroscopy and transmission electronic microscopy. Likewise, Se(IV) sorption capacity of the retention material and maximum amount of IL loaded on its surface were determined. Several factors concerning the functionalization, extraction and elution steps were optimized, yielding a 100% extraction efficiency for Se(IV) under optimal conditions. A limit of detection of 1.1 ng L- 1, a relative standard deviation of 5.7% and a 110-fold enhancement factor were obtained. The D-μ-SPE method was successfully applied to several water samples from different origins and compositions, including rain, tap, underground, river and sea.

40 CFR 63.4510 - What notifications must I submit?

Code of Federal Regulations, 2013 CFR

2013-07-01

... not need to submit copies of any test reports. (i) Mass fraction of organic HAP for one coating, for one thinner and/or other additive, and for one cleaning material. (ii) Mass fraction of coating solids... required. (iv) The amount of waste materials and the mass of organic HAP contained in the waste materials...

40 CFR 63.4510 - What notifications must I submit?

Code of Federal Regulations, 2011 CFR

2011-07-01

... not need to submit copies of any test reports. (i) Mass fraction of organic HAP for one coating, for one thinner and/or other additive, and for one cleaning material. (ii) Mass fraction of coating solids... required. (iv) The amount of waste materials and the mass of organic HAP contained in the waste materials...

40 CFR 63.4510 - What notifications must I submit?

Code of Federal Regulations, 2012 CFR

2012-07-01

... not need to submit copies of any test reports. (i) Mass fraction of organic HAP for one coating, for one thinner and/or other additive, and for one cleaning material. (ii) Mass fraction of coating solids... required. (iv) The amount of waste materials and the mass of organic HAP contained in the waste materials...

40 CFR 63.4510 - What notifications must I submit?

Code of Federal Regulations, 2014 CFR

2014-07-01

... not need to submit copies of any test reports. (i) Mass fraction of organic HAP for one coating, for one thinner and/or other additive, and for one cleaning material. (ii) Mass fraction of coating solids... required. (iv) The amount of waste materials and the mass of organic HAP contained in the waste materials...

National Aerospace Leadership Initiative - Phase 2

DTIC Science & Technology

2010-03-01

components) for turbine airfoils and larger sized components (e.g., combustor, augmenter, and nozzle applications). Substrate material properties ...material property impact to sensing, measurement and breakthrough detection. Establishment of CCAT’s Laser Applications Laboratory that includes next...generation and materials property (and component) validation. Task IV - Total Supply Chain Enterprise Effectiveness The competitiveness and

10 CFR 32.74 - Manufacture and distribution of sources or devices containing byproduct material for medical use.

Code of Federal Regulations, 2012 CFR

2012-01-01

... pertinent to an evaluation of its radiation safety, including: (i) The byproduct material contained, its... maintain its integrity under stresses likely to be encountered in normal use and accidents; (iv) For devices containing byproduct material, the radiation profile of a prototype device; (v) Details of quality...

10 CFR 32.74 - Manufacture and distribution of sources or devices containing byproduct material for medical use.

Code of Federal Regulations, 2011 CFR

2011-01-01

... pertinent to an evaluation of its radiation safety, including: (i) The byproduct material contained, its... maintain its integrity under stresses likely to be encountered in normal use and accidents; (iv) For devices containing byproduct material, the radiation profile of a prototype device; (v) Details of quality...

Fe II fluorescence and anomalous C IV doublet intensities in symbiotic novae

NASA Technical Reports Server (NTRS)

Michalitsianos, A. G.; Kafatos, M.; Meier, S. R.

1992-01-01

The variation of absolute intensities of Bowen-excited Fe II emission in the symbiotic stars RR Tel, RX Pup, and AG Peg is examined. The C IV doublet intensity ratios in RR Tel were not anomalous between 1979 and 1989, and the ratio had typical values within the optically thin range. The intensity of individual Fe II Bowen-excited lines is correlated with the C IV 1548.2 A flux, suggesting the presence of a foreground Fe II region in which fluorescent-excited material responds to flux variations of C IV 1548.2 A. In RX Pup the combined fluxes of Fe II Bowen-pumped lines can account for an appreciable fraction of the flux deficit in the C IV 1548.2 A line when the C IV doublet ratio is less than the optically thick limit of unity. The Fe II Bowen lines in RX Pup exhibit a velocity range from 0 to 80 km/s, where several strong Fe II emission lines correspond to deep absorption structure in the C IV 1548.2 A line profile. In AG Peg and C IV 1548.2 A flux deficit cannot be explained by Fe II fluorescent absorption alone when the C IV doublet ratio anomaly is at an extreme.

Transport and Transformation of Selenium and Other Constituents of Flue-Gas Desulfurization Wastewater in Water-Saturated Soil Materials.

PubMed

Galkaduwa, Madhubhashini B; Hettiarachchi, Ganga M; Kluitenberg, Gerard J; Hutchinson, Stacy L; Davis, Lawrence; Erickson, Larry E

2017-03-01

Constructed wetland treatment systems are used to remove selenium (Se) from flue-gas desulfurization (FGD) wastewater (WW). However, direct confirmation of the mechanism responsible for FGD WW Se retention in soil is lacking. A laboratory-based soil column study was performed to develop an evidence-based mechanism of Se retention and to study the behavior and the retention capacity of FGD WW constituents in water-saturated soil. A deoxygenated 1:1 mixture of FGD WW and raw water was delivered to the columns bottom-up at a flux of 1.68 cm d for 100 d. Some of the columns were flushed with the raw water at the same rate for an additional 100 d. Column effluent was analyzed for constituents of concern. Results showed a complete retention of FGD WW Se in the soil materials. Boron and fluorine were partially retained; however, sulfur, sodium, and chlorine retention was poor, agreeing with field observations. The FGD WW Se was retained in soil near the inlet end of the columns, indicating its limited mobility under reduced conditions. Sequential extraction procedure revealed that retained Se was mainly sequestered as stable/residual forms. Bulk- and micro-X-ray absorption near-edge structure spectroscopy confirmed that Se was mainly retained as reduced/stable species [Se(IV), organic Se, and Se(0)]. This study provides direct evidence for FGD WW Se retention in water-saturated soil via the transformation of oxidized Se into reduced/stable forms. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

Supporting students in developing literacy in science.

PubMed

Krajcik, Joseph S; Sutherland, LeeAnn M

2010-04-23

Reading, writing, and oral communication are critical literacy practices for participation in a global society. In the context of science inquiry, literacy practices support learners by enabling them to grapple with ideas, share their thoughts, enrich understanding, and solve problems. Here we suggest five instructional and curricular features that can support students in developing literacy in the context of science: (i) linking new ideas to prior knowledge and experiences, (ii) anchoring learning in questions that are meaningful in the lives of students, (iii) connecting multiple representations, (iv) providing opportunities for students to use science ideas, and (v) supporting students' engagement with the discourses of science. These five features will promote students' ability to read, write, and communicate about science so that they can engage in inquiry throughout their lives.

Materials Data Science: Current Status and Future Outlook

NASA Astrophysics Data System (ADS)

Kalidindi, Surya R.; De Graef, Marc

2015-07-01

The field of materials science and engineering is on the cusp of a digital data revolution. After reviewing the nature of data science and Big Data, we discuss the features of materials data that distinguish them from data in other fields. We introduce the concept of process-structure-property (PSP) linkages and illustrate how the determination of PSPs is one of the main objectives of materials data science. Then we review a selection of materials databases, as well as important aspects of materials data management, such as storage hardware, archiving strategies, and data access strategies. We introduce the emerging field of materials data analytics, which focuses on data-driven approaches to extract and curate materials knowledge from available data sets. The critical need for materials e-collaboration platforms is highlighted, and we conclude the article with a number of suggestions regarding the near-term future of the materials data science field.

[Applications of synthetic biology in materials science].

PubMed

Zhao, Tianxin; Zhong, Chao

2017-03-25

Materials are the basis for human being survival and social development. To keep abreast with the increasing needs from all aspects of human society, there are huge needs in the development of advanced materials as well as high-efficiency but low-cost manufacturing strategies that are both sustainable and tunable. Synthetic biology, a new engineering principle taking gene regulation and engineering design as the core, greatly promotes the development of life sciences. This discipline has also contributed to the development of material sciences and will continuously bring new ideas to future new material design. In this paper, we review recent advances in applications of synthetic biology in material sciences, with the focus on how synthetic biology could enable synthesis of new polymeric biomaterials and inorganic materials, phage display and directed evolution of proteins relevant to materials development, living functional materials, engineered bacteria-regulated artificial photosynthesis system as well as applications of gene circuits for material sciences.

PREFACE: Tsukuba International Conference on Materials Science 2013

NASA Astrophysics Data System (ADS)

Kijima, Masashi; Ohshima, Kenichi; Kojima, Seiji; Nagasaki, Yukio; Miyazaki, Shuichi; Kim, Hee Young; Kadowaki, Kazuo; Kashiwagi, Takanari; Nakamura, Junji; Yamamoto, Yohei; Goto, Hiromasa

2014-03-01

Tsukuba International Conference on Materials Science (TICMS) was held from 28th August to 6th September, 2013 for the celebration of 40th year anniversary of the University of Tsukuba. The conference was organized by the Division of Materials Science, in cooperation with the Graduate School of Pure and Applied Sciences, and Tsukuba Research Center for Interdisciplinary Materials Science. The purpose of the conference was to provide a unique forum for researchers and students working in various fields of materials science, which have been progressing so rapidly that no single society could cover. The conference consists of following seven workshops to cover various fields. The organizing committee believed that the conference gave all participants new insights into the widespread development of materials science and enhanced the circulation, among them, of information released at the conference. The organizers are grateful for the financial support from University of Tsukuba. This volume contains 25 selected papers from invited and contributed papers, all of which have been screened on the basis of the standard review process of the program committee. The editors express their thanks to those authors who contributed the papers published in this proceedings, which reflects the scientific value of the conference. Nov. 20, 2013 Seiji Kojima, Prof. Dr. Chair, Division of Materials Science Chair, Doctoral Program in Materials Science TICMS 2013 (http://www.ticonfms.tsukuba.ac.jp/) Workshop list The 13th Japan-Korea Joint Workshop on Materials Science Summer School of Biomaterials Science The Japan-Korea Joint Workshop on Shape Memory and Superelastic Technologies The 2nd Workshop on THz Radiation from Intrinsic Josephson Junctions The 3rd German-Japan Nanoworkshop TICMS and IWP Joint Workshop on Conjugated Polymers International Workshop on Science and Patents (IWP) 2013

The Usage of Recycle Materials for Science Practicum: Is There Any Effect on Science Process Skills?

ERIC Educational Resources Information Center

Prajoko, Setiyo; Amin, Mohamad; Rohman, Fatchur; Gipayana, Muhana

2017-01-01

This study aimed at determining the effect of recycle materials usage for science practicum on students' basic science process skills of the Open University, Surakarta. Recycle materials are the term used for the obtained materials and equipment from the students' environment by taking back the garbage or secondhand objects into goods or new…

NASA Microgravity Materials Science Conference

NASA Technical Reports Server (NTRS)

Gillies, D. C. (Compiler); McCauley, D. E. (Compiler)

1999-01-01

The Microgravity Materials Science Conference was held July 14-16, 1998 at the Von Braun Center in Huntsville, AL. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division at NASA Headquarters, and hosted by the NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications. It was the third NASA conference of this type in the microgravity materials science discipline. The microgravity science program sponsored approximately 125 investigations and 100 principal investigators in FY98, almost all of whom made oral or poster presentations at this conference. The conference's purpose was to inform the materials science community of research opportunities in reduced gravity in preparation for a NASA Research Announcement scheduled for release in late 1998 by the Microgravity Research Division at NASA Headquarters. The conference was aimed at materials science researchers from academia, industry, and government. A tour of the Marshall Space Flight Center microgravity research facilities was held on July 16, 1998. This volume is comprised of the research reports submitted by the principal investigators after the conference.

Silica-gel Particles Loaded with an Ionic Liquid for Separation of Zr(IV) Prior to Its Determination by ICP-OES.

PubMed

Marwani, Hadi M; Alsafrani, Amjad E; Asiri, Abdullah M; Rahman, Mohammed M

2016-06-29

A new ionic liquid loaded silica gel amine (SG-APTMS-N,N-EPANTf₂) was developed, as an adsorptive material, for selective adsorption and determination of zirconium, Zr(IV), without the need for a chelating intermediate. Based on a selectivity study, the SG-APTMS-N,N-EPANTf₂ phase showed a perfect selectivity towards Zr(IV) at pH 4 as compared to other metallic ions, including gold [Au(III)], copper [Cu(II)], cobalt [Co(II)], chromium [Cr(III)], lead [Pb(II)], selenium [Se(IV)] and mercury [Hg(II)] ions. The influence of pH, Zr(IV) concentration, contact time and interfering ions on SG-APTMS-N,N-EPANTf₂ uptake for Zr(IV) was evaluated. The presence of incorporated donor atoms in newly synthesized SG-APTMS-N,N-EPANTf₂ phase played a significant role in enhancing its uptake capacity of Zr(IV) by 78.64% in contrast to silica gel (activated). The equilibrium and kinetic information of Zr(IV) adsorption onto SG-APTMS-N,N-EPANTf₂ were best expressed by Langmuir and pseudo second-order kinetic models, respectively. General co-existing cations did not interfere with the extraction and detection of Zr(IV). Finally, the analytical efficiency of the newly developed method was also confirmed by implementing it for the determination of Zr(IV) in several water samples.

FWP executive summaries: basic energy sciences materials sciences and engineering program (SNL/NM).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Samara, George A.; Simmons, Jerry A.

2006-07-01

This report presents an Executive Summary of the various elements of the Materials Sciences and Engineering Program which is funded by the Division of Materials Sciences and Engineering, Office of Basic Energy Sciences, U.S. Department of Energy at Sandia National Laboratories, New Mexico. A general programmatic overview is also presented.

Performing both propensity score and instrumental variable analyses in observational studies often leads to discrepant results: a systematic review.

PubMed

Laborde-Castérot, Hervé; Agrinier, Nelly; Thilly, Nathalie

2015-10-01

Propensity score (PS) and instrumental variable (IV) are analytical techniques used to adjust for confounding in observational research. More and more, they seem to be used simultaneously in studies evaluating health interventions. The present review aimed to analyze the agreement between PS and IV results in medical research published to date. Review of all published observational studies that evaluated a clinical intervention using simultaneously PS and IV analyses, as identified in MEDLINE and Web of Science. Thirty-seven studies, most of them published during the previous 5 years, reported 55 comparisons between results from PS and IV analyses. There was a slight/fair agreement between the methods [Cohen's kappa coefficient = 0.21 (95% confidence interval: 0.00, 0.41)]. In 23 cases (42%), results were nonsignificant for one method and significant for the other, and IV analysis results were nonsignificant in most situations (87%). Discrepancies are frequent between PS and IV analyses and can be interpreted in various ways. This suggests that researchers should carefully consider their analytical choices, and readers should be cautious when interpreting results, until further studies clarify the respective roles of the two methods in observational comparative effectiveness research. Copyright © 2015 Elsevier Inc. All rights reserved.

Learning To Think, Learning To Learn: What the Science of Thinking and Learning Has To Offer Adult Education. NIFL Literacy Leader Fellowship, Program Reports, Volume IV, Number 1.

ERIC Educational Resources Information Center

Cromley, Jennifer

This book, developed for adult educators who teach or tutor reading in General Educational Development (GED) classrooms and for teacher trainers, contains 18 fact sheets on learning and thinking, each about 10 pages long. The following fact sheets are included: (1) Literature Is Not Science; (2) Making Connections; (3) Mental Models; (4) Thinking…

Implementing the Continued Fraction Algorithm on the Illiac IV.

DTIC Science & Technology

1980-01-01

Illinois University in 1975. Originally, the program was only capable of factoring numbers up to 30 decimal digits in length, but a number of improvements...Wunderlich F49620-79-C-O199 (, ) Mathematical Sciences Dept Northern ILlinois University _ 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM...ELEMENT. PROJECT, TASK AREA & WORK UNIT NUMBERS L rthern Illinois University 61102F 2304/A6 Mathematical Sciences Dept. DeKalb, IL 60115 II. CONTROLLING

FWP executive summaries, Basic Energy Sciences Materials Sciences Programs (SNL/NM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Samara, G.A.

1997-05-01

The BES Materials Sciences Program has the central theme of Scientifically Tailored Materials. The major objective of this program is to combine Sandia`s expertise and capabilities in the areas of solid state sciences, advanced atomic-level diagnostics and materials synthesis and processing science to produce new classes of tailored materials as well as to enhance the properties of existing materials for US energy applications and for critical defense needs. Current core research in this program includes the physics and chemistry of ceramics synthesis and processing, the use of energetic particles for the synthesis and study of materials, tailored surfaces and interfacesmore » for materials applications, chemical vapor deposition sciences, artificially-structured semiconductor materials science, advanced growth techniques for improved semiconductor structures, transport in unconventional solids, atomic-level science of interfacial adhesion, high-temperature superconductors, and the synthesis and processing of nano-size clusters for energy applications. In addition, the program includes the following three smaller efforts initiated in the past two years: (1) Wetting and Flow of Liquid Metals and Amorphous Ceramics at Solid Interfaces, (2) Field-Structured Anisotropic Composites, and (3) Composition-Modulated Semiconductor Structures for Photovoltaic and Optical Technologies. The latter is a joint effort with the National Renewable Energy Laboratory. Separate summaries are given of individual research areas.« less

Institute for Materials Science

Science.gov Websites

Search Site submit National Security Education Center Los Alamos National LaboratoryInstitute for Materials Science Incubate - Innovate - Integrate Los Alamos National Laboratory Institute for Materials educational center in NSEC focused on fostering the advancement of materials science at Los Alamos National

75 FR 18241 - Proposal Review Panel for Materials Research Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-09

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research Notice of Meeting In... Rieker, Program Director, Materials Research Science and Engineering Centers Program, Division of Materials Research, Room 1065, National Science Foundation, 4201 Wilson Boulevard, Arlington, VA 22230...

77 FR 20852 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-06

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In.... Thomas Rieker, Program Director, Materials Research Science and Engineering Centers Program, Division of Materials Research, Room 1065, National Science Foundation, 4201 Wilson Boulevard, Arlington, VA 22230...

Experimental magnetism research in Dhaka, Hanoi and Uppsala

NASA Astrophysics Data System (ADS)

Nordblad, Per

2015-04-01

Promoting basic science in developing countries is the aim of the International Science Program at Uppsala University, Sweden. This program, that some years ago celebrated its 50th anniversary, has been the main supporting agency of my more than 30 years of collaboration with research groups in Dhaka at Bangladesh University of Engineering and Technology and the Atomic Energy Commission, and research groups in Hanoi at the Vietnamese Academy of Science. Our common research on magnetism and magnetic materials has been built upon: (i) Longer visits (about half of their total PhD studies) by PhD students from Hanoi and Dhaka at Uppsala University that ends by PhD exams from their home Universities; (ii) short time visits (up to 2 months) by senior scientists to Uppsala for discussions and measurements; (iii) short visits by me and colleagues from Uppsala in Hanoi and Dhaka for discussions, workshops and conferences; (iv) mutual visits of scientists from Bangladesh and Vietnam to each other and neighboring countries (mostly India) for specific experiments and learning new methods and (v) some support for purchase of research equipment. The work with Dhaka and Hanoi and other countries has resulted in: development of internationally competitive research groups in Hanoi and Dhaka that independently publish in international journals, several PhDs that continue their work at the home institutes, numerous common publications in international scientific journals and not the least lasting professional and personal connections between scientists in Bangladesh, Vietnam, Thailand, Eritrea, India and Sweden.

Materials and Chemical Sciences Division annual report, 1987

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1988-07-01

Research programs from Lawrence Berkeley Laboratory in materials science, chemical science, nuclear science, fossil energy, energy storage, health and environmental sciences, program development funds, and work for others is briefly described. (CBS)

The implementation of integrated science teaching materials based socio-scientific issues to improve students scientific literacy for environmental pollution theme

NASA Astrophysics Data System (ADS)

Yenni, Rita; Hernani, Widodo, Ari

2017-05-01

The study aims to determine the increasing of students' science literacy skills on content aspects and competency of science by using Integrated Science teaching materials based Socio-scientific Issues (SSI) for environmental pollution theme. The method used in the study is quasi-experiment with nonequivalent pretest and posttest control group design. The students of experimental class used teaching materials based SSI, whereas the students of control class were still using the usual textbooks. The result of this study showed a significant difference between the value of N-gain of experimental class and control class, whichalso occurred in every indicator of content aspects and competency of science. This result indicates that using of Integrated Science teaching materials based SSI can improve content aspect and competency of science and can be used as teaching materials alternative in teaching of Integrated Science.

75 FR 39664 - Grant of Authority For Subzone Status Materials Science Technology, Inc. (Specialty Elastomers...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-12

... Status Materials Science Technology, Inc. (Specialty Elastomers and Fire Retardant Chemicals) Conroe... specialty elastomer manufacturing and distribution facility of Materials Science Technology, Inc., located... and distribution of specialty elastomers and fire retardant chemicals at the facility of Materials...

78 FR 11903 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-20

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site Visit review of the Materials Research Science and... Research Science and Engineering Centers Program, Division of Materials Research, Room 1065, National...

78 FR 39017 - Proposal Review Panel for Materials Research, Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-28

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research, Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and...: Part open. Contact Person: Dr. Chuck Bouldin, Program Director, Materials Research Science and...

77 FR 2095 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-13

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and... Person: Dr. Thomas Rieker, Program Director, Materials Research Science and Engineering Centers Program...

77 FR 25503 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-30

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and...: Dr. Sean L. Jones, Program Director, Materials Research Science and Engineering Centers Program...

77 FR 57161 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-17

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and... Research Science and Engineering Centers Program, Division of Materials Research, Room 1065, National...

78 FR 5505 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-25

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site Visit review of the Materials Research Science and.... Charles Bouldin, Program Director, Materials Research Science and Engineering Centers Program, Division of...

78 FR 40519 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-05

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and...: Part open Contact Person: Dr. Charles Ying, Program Director, Materials Research Science and...

[Maintenance of Pure Lines and Hybridization.] Student Materials. V.A. III. [IV-A-1 through IV-A-2].

ERIC Educational Resources Information Center

Texas A and M Univ., College Station. Vocational Instructional Services.

Part of a series of eight student learning modules in vocational agriculture, this booklet deals with plant reproduction. Topics covered include the pure line theory and its history, pure line selection, the effect of inbreeding on vitality, the definition of and reasons for hybridization in plants, and techniques for producing hybirds; a list of…

Taking a Population Census, Episode IV. Resource Material Development: Population Dynamics in Eighth Grade American History.

ERIC Educational Resources Information Center

Massialas, Byron G.; And Others

This is the fourth unit in a series that introduces population concepts into the eighth grade American history curriculum. (See SO 013 782 for an overview of the guide.) In Episode IV, the history topic is union under the Constitution. Objectives are to (1) help the student to examine the need for collecting information on the population during…

Optimizing tooth form with direct posterior composite restorations.

PubMed

Raghu, Ramya; Srinivasan, Raghu

2011-10-01

Advances in material sciences and technology have provided today's clinicians the strategies to transform the mechanistic approach of operative dentistry into a biologic philosophy. In the last three decades, composite resins have gone from being just an esthetically pleasing way of restoring Class III and Class IV cavities to become the universal material for both anterior and posterior situations as they closely mimic the natural esthetics while restoring the form of the human dentition. In order to enhance their success, clinicians have to rethink their protocol instead of applying the same restorative concepts and principles practiced with metallic restorations. Paralleling the evolution of posterior composite resin materials, cavity designs, restorative techniques and armamentarium have also developed rapidly to successfully employ composite resins in Class II situations. Most of the earlier problems with posterior composites such as poor wear resistance, polymerization shrinkage, postoperative sensitivity, predictable bonding to dentin, etc., have been overcome to a major extent. However, the clinically relevant aspect of achieving tight contacts in Class II situations has challenged clinicians the most. This paper reviews the evolution of techniques and recent developments in achieving predictable contacts with posterior composites. A Medline search was performed for articles on "direct posterior composite contacts." The keywords used were "contacts and contours of posterior composites." The reference list of each article was manually checked for additional articles of relevance.

Irradiation-Accelerated Corrosion of Reactor Core Materials. Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiao, Zhujie; Was, Gary; Bartels, David

2015-04-02

This project aims to understand how radiation accelerates corrosion of reactor core materials. The combination of high temperature, chemically aggressive coolants, a high radiation flux and mechanical stress poses a major challenge for the life extension of current light water reactors, as well as the success of most all GenIV concepts. Of these four drivers, the combination of radiation and corrosion places the most severe demands on materials, for which an understanding of the fundamental science is simply absent. Only a few experiments have been conducted to understand how corrosion occurs under irradiation, yet the limited data indicates that themore » effect is large; irradiation causes order of magnitude increases in corrosion rates. Without a firm understanding of the mechanisms by which radiation and corrosion interact in film formation, growth, breakdown and repair, the extension of the current LWR fleet beyond 60 years and the success of advanced nuclear energy systems are questionable. The proposed work will address the process of irradiation-accelerated corrosion that is important to all current and advanced reactor designs, but remains very poorly understood. An improved understanding of the role of irradiation in the corrosion process will provide the community with the tools to develop predictive models for in-reactor corrosion, and to address specific, important forms of corrosion such as irradiation assisted stress corrosion cracking.« less

High capacity nickel battery material doped with alkali metal cations

DOEpatents

Jackovitz, John F.; Pantier, Earl A.

1982-05-18

A high capacity battery material is made, consisting essentially of hydrated Ni(II) hydroxide, and about 5 wt. % to about 40 wt. % of Ni(IV) hydrated oxide interlayer doped with alkali metal cations selected from potassium, sodium and lithium cations.

Alkali slurry ozonation to produce a high capacity nickel battery material

DOEpatents

Jackovitz, John F.; Pantier, Earl A.

1984-11-06

A high capacity battery material is made, consisting essentially of hydrated Ni(II) hydroxide, and about 5 wt. % to about 40 wt. % of Ni(IV) hydrated oxide interlayer doped with alkali metal cations selected from potassium, sodium and lithium cations.

34 CFR 692.71 - What activities may be funded under the SLEAP Program?

Code of Federal Regulations, 2010 CFR

2010-07-01

... achievement; or (2) Wish to enter a program of study leading to a career in— (i) Information technology; (ii) Mathematics, computer science, or engineering; (iii) Teaching; or (iv) Other fields determined by the State to...

Thermally activated ("thermal") battery technology. Part IV. Anode materials

NASA Astrophysics Data System (ADS)

Guidotti, Ronald A.; Masset, Patrick J.

In this paper, the history of anode materials developed for use in thermally activated ("thermal") batteries is presented. The chemistries (phases) and electrochemical characteristics (discharge mechanisms) of these materials are described, along with general thermodynamic properties, where available. This paper is the last of a five-part series that presents a general review of thermal-battery technology.

Navajo Materials For Classroom Use: K-12 Curriculum Directory (Preliminary Edition).

ERIC Educational Resources Information Center

Johnson, Gene, Comp.; And Others

Compiled as part of Title IV-B Materials Development Project at Rough Rock Demonstration School, the bibliography attempts to address: (1) what Navajo-based materials already exist and are available; (2) where Navajo curriculum development is currently taking place; and (3) what needs exist at the present stage of Navajo curriculum development.…

The structural science of functional materials.

PubMed

Catlow, C Richard A

2018-01-01

The growing complexity of functional materials and the major challenges this poses to structural science are discussed. The diversity of structural materials science and the contributions that computation is making to the field are highlighted.

75 FR 18240 - Proposal Review Panel for Materials Research Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-09

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and.... Type of Meeting: Part-open. Contact Person: Thomas Rieker, Program Director, Materials Research Science...

77 FR 19362 - Proposal Review Panel for Materials Research, Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-30

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research, Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and...: Part open. Contact Person: Dr. Sean L. Jones, Program Director, Materials Research Science and...

78 FR 4464 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-22

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In accordance with the Federal Advisory Committee Act (Pub. L. 92- 463 as amended), the National Science..., Materials Research Science and Engineering Centers Program, Division of Materials Research, Room 1065...

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Synthesis Condensed Matter and Materials Physics Scattering and Instrumentation Science Centers Center for Berkeley Lab Berkeley Lab A-Z Index Phone Book Jobs Search DOE Search MSD Go MSD - Materials Sciences Division About Organization Contact Research Core Programs Materials Discovery, Design and

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stengl, Vaclav, E-mail: stengl@iic.cas.cz; Bludska, Jana; Oplustil, Frantisek

Highlights: {yields} New nano-dispersive materials for warfare agents decontamination. {yields} 95% decontamination activities for sulphur mustard. {yields} New materials base on titanium and manganese oxides. -- Abstract: Titanium(IV)-manganese(IV) nano-dispersed oxides were prepared by a homogeneous hydrolysis of potassium permanganate and titanium(IV) oxo-sulphate with 2-chloroacetamide. Synthesised samples were characterised using Brunauer-Emmett-Teller (BET) surface area and Barrett-Joiner-Halenda porosity (BJH), X-ray diffraction (XRD), infrared spectroscopy (IR), and scanning electron microscopy (SEM). These oxides were taken for an experimental evaluation of their reactivity with sulphur mustard (HD or bis(2-chloroethyl)sulphide) and soman (GD or (3,3'-dimethylbutan-2-yl)-methylphosphonofluoridate). Mn{sup 4+} content affects the decontamination activity; with increasing Mn{supmore » 4+} content the activity increases for sulphur mustard and decreases for soman. The best decontamination activities for sulphur mustard and soman were observed for samples TiMn{sub 3}7 with 18.6 wt.% Mn and TiMn{sub 5} with 2.1 wt.% Mn, respectively.« less

The effect of different surface treatments on the bond strength of a gingiva-colored indirect composite veneering material to three implant framework materials.

PubMed

Koizuka, Mai; Komine, Futoshi; Blatz, Markus B; Fushiki, Ryosuke; Taguchi, Kohei; Matsumura, Hideo

2013-09-01

To evaluate and compare the shear-bond strength of a gingiva-colored indirect composite material to three different implant framework materials (zirconia ceramics, gold alloy, and titanium), and to investigate the effect of surface pretreatment by air-particle abrasion and four priming agents. A gingiva-colored indirect composite (Ceramage) was bonded to three framework materials (n = 80): commercially pure titanium (CP- Ti ), ADA (American Dental Association)-type 4 casting gold alloy (Type IV), and zirconia ceramics (Zirconia) with or without airborne-particle abrasion. Before bonding, the surface of the specimens was treated using no (control) or one of four priming agents: Alloy Primer (ALP), Estenia Opaque Primer (EOP), Metal Link Primer (MLP), and V-Primer (VPR). Shear-bond strength was determined after 24-h wet storage. Data were analyzed using Steel-Dwass for multiple comparisons, and Mann-Whitney U-test (P = 0.05). For both CP- Ti and Zirconia substrates, three groups, ALP, EOP, and MLP, showed significantly higher bond strengths (P < 0.05) than the other groups with or without airborne-particle abrasion. For Type IV substrates, significantly higher bond strengths were obtained in ALP and MLP groups (P < 0.01) compared with the other groups with airborne-particle abrasion. Application of priming agents containing specific phosphoric ester groups significantly enhances the bond strength of a gingiva-colored composite material to commercially pure titanium and zirconia frameworks. Combined use of a thione monomer with a phosphoric monomer enhances the bond strengths to airborne-particle abraded type IV gold alloy. © 2012 John Wiley & Sons A/S.

New process for purifying high purity α1-antitrypsin from Cohn Fraction IV by chromatography: A promising method for the better utilization of plasma.

PubMed

Huangfu, Chaoji; Zhang, Jinchao; Ma, Yuyuan; Jia, Junting; Lv, Maomin; Zhao, Xiong; Zhang, Jingang

2017-03-01

α1-antitrypsin (AAT) is a 52kDa serine protease inhibitor that is abundant in plasma. It is synthesized mainly by hepatic cells, and widely used to treat patients with emphysema due to congenital deficiency of AAT. A new isolation method for the purification of AAT from Cohn Fraction IV (Cohn F IV) is described. Cohn F IV is usually discarded as a byproduct from Cohn process. Using Cohn F IV as starting material does not interfere with the production of other plasma proteins and the cost of purification could be reduced greatly. Parameters of each step during purification were optimized, 15% polyethyleneglycol (PEG) concentration and pH 5.2 for PEG precipitation, elution with 0.05M sodium acetate and pH 4.7 for ion-exchange chromatography, and two steps blue sepharose affinity chromatography were chosen for AAT purification. The final protein with purity of 98.17%, specific activity of 3893.29 IU/mg, and yield of 28.35%, was achieved. Western blotting was applied for qualitative identification of final product, which specifically reacted with goat anti-human AAT antibody. LC-ESI-MS/MS was also employed to confirm the final protein. High performance liquid chromatography was used to analyze the composition of purified protein suggesting that pure protein was achieved. The molecular weight of AAT is 51062.77Da which was identified by LC-MS-MS. The manufacturing process described here may make better use of human plasma with Cohn F IV as starting material. The simple process described in this study is simple and inexpensive, it has a potential value for large scale production. Copyright © 2017 Elsevier B.V. All rights reserved.

Gluteo-vaginal fistula after posterior intravaginal slingplasty: a case report.

PubMed

Grynberg, Michael; Teyssedre, Jacques; Staerman, Frederic

2009-07-01

In patients with posthysterectomy prolapse of the vaginal vault, the posterior intravaginal slingplasty (posterior IVS, Tyco Healthcare, USA) has been suggested as an alternative to traditional vaginal vault suspensions. The goal of this technique is to recreate the uterosacral ligaments and to reinforce the rectovaginal fascia with the use of prosthetic material. We report the case of a 53-year-old woman with a history of 27 months of perineal suppurative discharge after she underwent a vaginal vault prolapse and rectocele repair using a posterior IVS (Tyco Healthcare, USA). The IVS tape was reinforced by interposing a rectovaginal monofilament polypropylene mesh (Parietex, Sofradim, France). Imaging studies and surgical exploration confirmed infection of the IVS mesh with the formation of a gluteo-vaginal fistula while the rectovaginal mesh was intact.

77 FR 2095 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-13

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In... Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and... Material Science in Atlanta, Georgia. Type of Meeting: Partial Open. Contact Person: Dr. Sean L. Jones...

Berkeley Lab - Materials Sciences Division

Science.gov Websites

Computational Study of Excited-State Phenomena in Energy Materials Center for X-ray Optics MSD Facilities Ion and Materials Physics Scattering and Instrumentation Science Centers Center for Computational Study of Sciences Centers Center for Computational Study of Excited-State Phenomena in Energy Materials Center for X

Microgravity Materials Science Conference 2000. Volume 1

NASA Technical Reports Server (NTRS)

Ramachandran, Narayanan (Editor); Bennett, Nancy (Editor); McCauley, Dannah (Editor); Murphy, Karen (Editor); Poindexter, Samantha (Editor)

2001-01-01

This is Volume 1 of 3 of the 2000 Microgravity Material Science Conference that was held June 6-8 at the Von Braun Center, Huntsville, Alabama. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division (MRD) at NASA Headquarters, and hosted by NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the fourth NASA conference of this type in the microgravity materials science discipline. The microgravity science program sponsored approx. 200 investigators, all of whom made oral or poster presentations at this conference. In addition, posters and exhibits covering NASA microgravity facilities, advanced technology development projects sponsored by the NASA Microgravity Research Division at NASA Headquarters, and commercial interests were exhibited. The purpose of the conference was to inform the materials science community of research opportunities in reduced gravity and to highlight the Spring 2001 release of the NASA Research Announcement (NRA) to solicit proposals for future investigations. It also served to review the current research and activities in materials science, to discuss the envisioned long-term goals. and to highlight new crosscutting research areas of particular interest to MRD. The conference was aimed at materials science researchers from academia, industry, and government. A workshop on in situ resource utilization (ISRU) was held in conjunction with the conference with the goal of evaluating and prioritizing processing issues in Lunar and Martian type environments. The workshop participation included invited speakers and investigators currently funded in the material science program under the Human Exploration and Development of Space (HEDS) initiative. The conference featured a plenary session every day with an invited speaker that was followed by three parallel breakout sessions in subdisciplines. Attendance was close to 350 people. Posters were available for viewing during the conference and a dedicated poster session was held on the second day. Nanotechnology radiation shielding materials, Space Station science opportunities, biomaterials research, and outreach and educational aspects of the program were featured in the plenary talks. This volume, the first to be released on CD-ROM for materials science, is comprised of the research reports submitted by the Principal Investigators at the conference.

Microgravity Materials Science Conference 2000. Volume 3

NASA Technical Reports Server (NTRS)

Ramachandran, Narayanan; Bennett, Nancy; McCauley, Dannah; Murphy, Karen; Poindexter, Samantha

2001-01-01

This is Volume 3 of 3 of the 2000 Microgravity Materials Science Conference that was held June 6-8 at the Von Braun Center, Huntsville, Alabama. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division (MRD) at NASA Headquarters, and hosted by NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the fourth NASA conference of this type in the Microgravity materials science discipline. The microgravity science program sponsored 200 investigators, all of whom made oral or poster presentations at this conference- In addition, posters and exhibits covering NASA microgravity facilities, advanced technology development projects sponsored by the NASA Microgravity Research Division at NASA Headquarters, and commercial interests were exhibited. The purpose of the conference was to inform the materials science community of research opportunities in reduced gravity and to highlight the Spring 2001 release of the NASA Research Announcement (NRA) to solicit proposals for future investigations. It also served to review the current research and activities in material,, science, to discuss the envisioned long-term goals. and to highlight new crosscutting research areas of particular interest to MRD. The conference was aimed at materials science researchers from academia, industry, and government. A workshop on in situ resource utilization (ISRU) was held in conjunction with the conference with the goal of evaluating and prioritizing processing issues in Lunar and Martian type environments. The workshop participation included invited speakers and investigators currently funded in the material science program under the Human Exploration and Development of Space (HEDS) initiative. The conference featured a plenary session every day with an invited speaker that was followed by three parallel breakout sessions in subdisciplines. Attendance was close to 350 people, Posters were available for viewing during the conference and a dedicated poster session was held on the second day. Nanotechnology, radiation shielding materials, Space Station science opportunities, biomaterials research, and outreach and educational aspects of the program were featured in the plenary talks. This volume, the first to be released on CD-ROM for materials science, is comprised of the research reports submitted by the Principal Investigators at the conference.

Microgravity Materials Science Conference 2000. Volume 2

NASA Technical Reports Server (NTRS)

Ramachandran, Narayanan (Editor); Bennett, Nancy (Editor); McCauley, Dannah (Editor); Murphy, Karen (Editor); Poindexter, Samantha (Editor)

2001-01-01

This is Volume 2 of 3 of the 2000 Microgravity Materials Science Conference that was held June 6-8 at the Von Braun Center, Huntsville, Alabama. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division (MRD) at NASA Headquarters, and hosted by NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the fourth NASA conference of this type in the Microgravity materials science discipline. The microgravity science program sponsored approx. 200 investigators, all of whom made oral or poster presentations at this conference- In addition, posters and exhibits covering NASA microgravity facilities, advanced technology development projects sponsored by the NASA Microgravity Research Division at NASA Headquarters, and commercial interests were exhibited. The purpose of the conference %%,its to inform the materials science community of research opportunities in reduced gravity and to highlight the Spring 2001 release of the NASA Research Announcement (NRA) to solicit proposals for future investigations. It also served to review the current research and activities in material,, science, to discuss the envisioned long-term goals. and to highlight new crosscutting research areas of particular interest to MRD. The conference was aimed at materials science researchers from academia, industry, and government. A workshop on in situ resource utilization (ISRU) was held in conjunction with the conference with the goal of evaluating and prioritizing processing issues in Lunar and Martian type environments. The workshop participation included invited speakers and investigators currently funded in the material science program under the Human Exploration and Development of Space (HEDS) initiative. The conference featured a plenary session every day with an invited speaker that was followed by three parallel breakout sessions in subdisciplines. Attendance was close to 350 people, Posters were available for viewing during the conference and a dedicated poster session was held on the second day. Nanotechnology, radiation shielding materials, Space Station science opportunities, biomaterials research, and outreach and educational aspects of the program were featured in the plenary talks. This volume, the first to be released on CD-ROM for materials science, is comprised of the research reports submitted by the Principal Investigators at the conference.

Creating Orthographically Rectified Satellite Multi-Spectral Imagery with High Resolution Digital Elevation Model from LiDAR: A Tutorial

DTIC Science & Technology

2014-08-15

challenges. ERDC develops innovative solutions in civil and military engineering, geospatial sciences, water resources, and environmental sciences for...GRL TR-14-1 iv Abstract Orthoimages are used to produce image- map products for navigation and planning, and serve as source data for advanced...resulting mosaic covers a wider area and contains less visible seams, which makes the map easier to understand. RPC replace the actual sensor model while

Course and Curriculum Improvement Materials: Mathematics, Science, Social Sciences - Elementary, Intermediate, Secondary.

ERIC Educational Resources Information Center

National Science Foundation, Washington, DC.

This is a list of curriculum improvement materials produced by major course and curriculum projects supported by the National Science Foundation's Division of Pre-College Education in Science. The materials are grouped by educational level (elementary, intermediate, and secondary) and within each level by broad discipline groupings (mathematics,…

Trends in the Use of Supplementary Materials in Environmental Science Journals

ERIC Educational Resources Information Center

Kenyon, Jeremy; Sprague, Nancy R.

2014-01-01

Our research examined the use of supplementary materials in six environmental science disciplines: atmospheric sciences, biology, fisheries, forestry, geology, and plant sciences. Ten key journals were selected from each of these disciplines and the number of supplementary materials, such as data files or videos, in each issue was noted over a…

In vivo tissue response and durability of five novel synthetic polymers in a rabbit model.

PubMed

Sahin, E; Cingi, C; Eskiizmir, G; Altintoprak, N; Calli, A; Calli, C; Yilgör, I; Yilgör, E

2016-04-01

Alloplastic materials are frequently used in facial plastic surgeries such as rhinoplasty and nasal reconstruction. Unfortunately, the ideal alloplastic material has not been found. This experimental study evaluates the tissue response and durability of five novel polymers developed as an alloplastic material. In this experimental study involving a tertiary university hospital, six subcuticular pockets were formed at the back of 10 rabbits for the implantation of each polymer and sham group. Each pocket was excised with its adjacent tissue after three months, and collected for histopathological examination. Semi-quantitative examination including neovascularisation, inflammation, fibrosis, abscess formation, multinucleated foreign body giant cells was performed, and integrity of polymer was evaluated. A statistical comparison was performed. No statically significant difference was detected in neovascularisation, inflammation, fibrosis, abscess formation and multinucleated foreign body giant cells when a paired comparison between sham and polymer II, III and IV groups was performed individually. Nevertheless, the degree of fibrosis was less than sham group in polymer I (p = .027) and V (p = .018), although the other variables were almost similar. The integrity of polymers III (9 intact, 1 fragmented) and IV (8 intact, 2 absent) was better than the other polymers. These novel synthetic polymers could be considered as good candidates for clinical applicability. All polymers provided satisfactory results in terms of tissue response; however, fibrovascular integration was higher in polymers II, III and IV. In addition, the durability of polymer III and IV was better than the others. © Copyright by Società Italiana di Otorinolaringologia e Chirurgia Cervico-Facciale, Rome, Italy.

Influence of polyurethane resin dies on the fit and adaptation of full veneer crowns.

PubMed

Lillywhite, Graeme R R; Vohra, Fahim

2015-01-01

Polyurethane resin is a possible alternative to type IV dental stone for fabrication of indirect restorations however its dimensional accuracy is questionable. The aim was to investigate the dimensional accuracy of silica filled polyurethane resin die material by evaluating the marginal fit and adaptation of indirect gold castings. Experimental, in vitro study. Totally 40 copper plated replicas of a nickel chrome master die analogous to a veneer gold crown preparation were made and impressions recorded using polyvinylsiloxane material. Twenty impressions were poured in type IV dental stone (control group (Vel-mix, Kerr, UK) and the remaining (n = 20) in silica filled polyurethane die material (test group) (Alpha Die MF, CA, USA). Gold castings were fabricated for each die using standardized techniques. The castings were seated on their respective copper plated dies, embedded in resin and sectioned. The specimens were analyzed by measuring marginal opening and the area beneath the casting at a ×63 magnification and using image analysis software. Data were analyzed using a Student's t-test. No significant difference was observed between the experimental groups (P > 0.05). The mean marginal opening for type IV, dental stone and polyurethane resin, was 57 ± 22.6 μm and 63.47 ± 27.1 μm, respectively. Stone displayed a smaller area beneath the casting (31581 ± 16297 μm 2 ) as compared to polyurethane resin (35003 ± 23039 μm 2 ). The fit and adaptation of indirect gold castings made on polyurethane and type IV dental stone dies were comparable.

Luminescence of III-IV-V thin film alloys grown by metalorganic chemical vapor deposition

NASA Astrophysics Data System (ADS)

Jia, Roger; Zhu, Tony; Bulović, Vladimir; Fitzgerald, Eugene A.

2018-05-01

III-IV-V heterovalent alloys have the potential to satisfy the need for infrared bandgap materials that also have lattice constants near GaAs. In this work, significant room temperature photoluminescence is reported for the first time in high quality III-IV-V alloys grown by metalorganic chemical vapor deposition. Pronounced phase separation, a characteristic suspected to quench luminescence in the alloys in the past, was successfully inhibited by a modified growth process. Small scale composition fluctuations were observed in the alloys; higher growth temperatures resulted in fluctuations with a striated morphology, while lower growth temperatures resulted in fluctuations with a speckled morphology. The composition fluctuations cause bandgap narrowing in the alloys—measurements of various compositions of (GaAs)1-x(Ge2)x alloys reveal a maximum energy transition of 0.8 eV under 20% Ge composition rather than a continuously increasing transition with the decreasing Ge composition. Additionally, luminescence intensity decreased with the decreasing Ge composition. The alloys appear to act as a Ge-like solid penetrating a GaAs lattice, resulting in optical properties similar to those of Ge but with a direct-bandgap nature; a decrease in the Ge composition corresponds to a reduction in the light-emitting Ge-like material within the lattice. An energy transition larger than 0.8 eV was obtained through the addition of silicon to the (GaAs)1-x(Ge2)x alloy. The results indicate significant promise for III-IV-V alloys as potential materials for small bandgap optical devices with previously unachievable lattice constants.

21 CFR 1315.23 - Procedure for fixing individual manufacturing quotas.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) The economic and physical availability of raw materials for use in manufacturing and for inventory purposes, (iv) Yield and stability problems, (v) Potential disruptions to production (including possible... cycle and current inventory position. (iii) The economic and physical availability of raw materials for...

8 CFR 204.5 - Petitions for employment-based immigrants.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., date, and author of the material, and any necessary translation; (iv) Evidence of the alien's... scientific, scholarly, artistic, athletic, or business-related contributions of major significance in the... author of the material, and any necessary translation; (D) Evidence of the alien's participation, either...

Site Environmental Report for Calendar Year 2013. DOE Operations at The Boeing Company, Santa Susana Field Laboratory, Area IV

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2014-06-30

This Annual Site Environmental Report (ASER) for 2013 describes the environmental conditions related to work performed for the Department of Energy (DOE) at Area IV of the Santa Susana Field Laboratory (SSFL). The Energy Technology Engineering Center (ETEC), a government-owned, company-operated test facility, was located in Area IV. The operations in Area IV included development, fabrication, operation and disassembly of nuclear reactors, reactor fuel, and other radioactive materials. Other activities in the area involved the operation of large-scale liquid metal facilities that were used for testing non-nuclear liquid metal fast breeder reactor components. All nuclear work was terminated in 1988,more » and all subsequent radiological work has been directed toward environmental restoration and decontamination and decommissioning (D&D) of the former nuclear facilities and their associated sites. Liquid metal research and development ended in 2002. Since May 2007, the D&D operations in Area IV have been suspended by the DOE, but the environmental monitoring and characterization programs have continued. Results of the radiological monitoring program for the calendar year 2013 continue to indicate that there are no significant releases of radioactive material from Area IV of SSFL. All potential exposure pathways are sampled and/or monitored, including air, soil, surface water, groundwater, direct radiation, transfer of property (land, structures, waste), and recycling. Due to the suspension of D&D activities in Area IV, no effluents were released into the atmosphere during 2013. Therefore, the potential radiation dose to the general public through airborne release was zero. Similarly, the radiation dose to an offsite member of the public (maximally exposed individual) due to direct radiation from SSFL is indistinguishable from background. All radioactive wastes are processed for disposal at DOE disposal sites and/or other licensed sites approved by DOE for radioactive waste disposal. No liquid radioactive wastes were released into the environment in 2013.« less

Design Two-dimensional Materials with Superb Electronic and Optoelectronic Properties: The case of SiS

NASA Astrophysics Data System (ADS)

Wei, Su-Huai; Yang, Ji-Hui; Zhang, Yueyu; Yin, Wan-Jian; Gong, X. G.; Yakobson, Boris I.

Two-dimensional (2D) semiconductors have many unique electronic and optoelectronic properties that is suitable for novel device applications. Most of the current study are focused on group IV or transition metal chalcogenides. In this study, using atomic transmutation and global optimization methods, we identified two group IV-VI 2D materials, Pma2-SiS and silicene sulfide that can overcome shortcomings encountered in conventional 2D semiconducttord. Pma2-SiS is found to be both chemically, energetically, and thermally stable. Most importantly, Pma2-SiS has unique electronic and optoelectronic properties, including direct bandgaps suitable for solar cells, good mobility for nanoelectronics, good flexibility of property tuning by layer thickness and strain appliance, and good air stability as well. Therefore, Pma2-SiS is expected to be a very promising 2D material in the field of 2D electronics and optoelectronics. Silicene sulfide also shows similar properties. We believe that the designing principles and approaches used to identify these materials have great potential to accelerate future finding of new functional materials within the 2D families.

NASA/First Materials Science Research Rack (MSRR-1) Module Inserts Development for the International Space Station

NASA Technical Reports Server (NTRS)

Crouch, Myscha; Carswell, Bill; Farmer, Jeff; Rose, Fred; Tidwell, Paul

1999-01-01

The Material Science Research Rack 1 (MSRR-1) of the Material Science Research Facility (MSRF) contains an Experiment Module (EM) being developed collaboratively by NASA and the European Space Agency (ESA). This NASA/ESA EM will accommodate several different removable and replaceable Module Inserts (MIs) which are installed on orbit. Two of the NASA MIs being developed for specific material science investigations are described herein.

Point-contact electron tunneling into the high-Tc superconductor Y-Ba-Cu-O

NASA Astrophysics Data System (ADS)

Kirk, M. D.; Smith, D. P. E.; Mitzi, D. B.; Sun, J. Z.; Webb, D. J.

1987-06-01

Results are reported from a study of electron tunneling into bulk samples of the new high-Tc superconductor Y-Ba-Cu-O using point-contact tunneling. Based on a superconductive tunneling interpretation, the results show exceptionally large energy gaps in these materials (roughly 2Delta = 100 MeV), implying 2Delta/kBTc = about 13. Similar values were found for La-Sr-Cu-O. The structure in the I-V curves is also similar to that seen in La-Sr-Cu-O. From the asymmetries observed in the I-V characteristics, it is inferred that the natural tunneling barrier on this material is of the Schottky type.

Gen IV Materials Handbook Functionalities and Operation (4A) Handbook Version 4.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Weiju

2013-09-01

This document is prepared for navigation and operation of the Gen IV Materials Handbook, with architecture description and new user access initiation instructions. Development rationale and history of the Handbook is summarized. The major development aspects, architecture, and design principles of the Handbook are briefly introduced to provide an overview of its past evolution and future prospects. Detailed instructions are given with examples for navigating the constructed Handbook components and using the main functionalities. Procedures are provided in a step-by-step fashion for Data Upload Managers to upload reports and data files, as well as for new users to initiate Handbookmore » access.« less

Nanostructured SnSe: Synthesis, doping, and thermoelectric properties

NASA Astrophysics Data System (ADS)

Liu, Shuhao; Sun, Naikun; Liu, Mei; Sucharitakul, Sukrit; Gao, Xuan P. A.

2018-03-01

IV-VI monochalcogenide SnSe or SnS has recently been proposed as a promising two-dimensional (2D) material for valleytronics and thermoelectrics. We report the synthesis of SnSe nanoflakes and nanostructured thin films with chemical vapor deposition method and their thermoelectric properties. As grown SnSe nanostructures are found to be intrinsically p-type and the single SnSe nanoflake field effect transistor was fabricated. By Ag doping, the power factor of SnSe nanostructured thin films can be improved by up to one order of magnitude compared to the "intrinsic" as grown materials. Our work provides an initial step in the pursuit of IV-VI monochalcogenides as novel 2D semiconductors for electronics and thermoelectrics.

A New Direction for NASA Materials Science Research Using the International Space Station

NASA Technical Reports Server (NTRS)

Schlagheck, Ronald; Trach, Brian; Geveden, Rex D. (Technical Monitor)

2001-01-01

NASA recently created a fifth Strategic Enterprise, the Office of Biological and Physical Research (OBPR), to bring together physics, chemistry, biology, and engineering to foster interdisciplinary research. The Materials Science Program is one of five Microgravity Research disciplines within this new enterprise's Division of Physical Sciences Research. The Materials Science Program will participate within this new enterprise structure in order to facilitate effective use of ISS facilities, target scientific and technology questions and transfer scientific and technology results for Earth benefits. The Materials Science research will use a low gravity environment for flight and ground-based research in crystallization, fundamental processing, properties characterization, and biomaterials in order to obtain fundamental understanding of various phenomena effects and relationships to the structures, processing, and properties of materials. Completion of the International Space Station's (ISS) first major assembly, during the past year, provides new opportunities for on-orbit research and scientific utilization. Accommodations will support a variety of Materials Science payload hardware both in the US and international partner modules with emphasis on early use of Express Rack and Glovebox facilities. This paper addresses the current scope of the flight investigator program. These investigators will use the various capabilities of the ISS to achieve their research objectives. The type of research and classification of materials being studied will be addressed. This includes the recent emphasis being placed on nanomaterials and biomaterials type research. Materials Science Program will pursue a new, interdisciplinary approach, which contributes, to Human Space Flight Exploration research. The Materials Science Research Facility (MSRF) and other related American and International experiment modules will serve as the foundation for this research. Discussion will be included to explain the changing concept for materials science research processing capabilities aboard the ISS along with the various ground facilities necessary to support the program. Finally, the paper will address the initial utilization schedule and strategy for the various materials science payloads including their corresponding hardware.

76 FR 35015 - Certain Lighting Control Devices Including Dimmer Switches and Parts Thereof (IV); Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-15

..., Emeryville, CA 94608. Wenzhou Huir Electric Science & Technology Co. Ltd., Bridge East Wan- Ao, Qiatou... notice to the respondent, to find the facts to be as alleged in the complaint and this notice and to...

7 CFR 610.22 - State Technical Committee membership.

Code of Federal Regulations, 2011 CFR

2011-01-01

... variety of disciplines in soil, water, wetlands, plant, and wildlife sciences. The State Conservationist... resources agency; (iv) Department of agriculture; (v) Association of soil and water conservation districts; and (vi) Soil and water conservation agency; (8) Agricultural producers representing the variety of...

7 CFR 610.22 - State Technical Committee membership.

Code of Federal Regulations, 2012 CFR

2012-01-01

... variety of disciplines in soil, water, wetlands, plant, and wildlife sciences. The State Conservationist... resources agency; (iv) Department of agriculture; (v) Association of soil and water conservation districts; and (vi) Soil and water conservation agency; (8) Agricultural producers representing the variety of...

7 CFR 610.22 - State Technical Committee membership.

Code of Federal Regulations, 2013 CFR

2013-01-01

... variety of disciplines in soil, water, wetlands, plant, and wildlife sciences. The State Conservationist... resources agency; (iv) Department of agriculture; (v) Association of soil and water conservation districts; and (vi) Soil and water conservation agency; (8) Agricultural producers representing the variety of...

7 CFR 610.22 - State Technical Committee membership.

Code of Federal Regulations, 2010 CFR

2010-01-01

... variety of disciplines in soil, water, wetlands, plant, and wildlife sciences. The State Conservationist... resources agency; (iv) Department of agriculture; (v) Association of soil and water conservation districts; and (vi) Soil and water conservation agency; (8) Agricultural producers representing the variety of...

7 CFR 610.22 - State Technical Committee membership.

Code of Federal Regulations, 2014 CFR

2014-01-01

... variety of disciplines in soil, water, wetlands, plant, and wildlife sciences. The State Conservationist... resources agency; (iv) Department of agriculture; (v) Association of soil and water conservation districts; and (vi) Soil and water conservation agency; (8) Agricultural producers representing the variety of...

Ab Initio Molecular Dynamics of Uranium Incorporated in Goethite (α-FeOOH): Interpretation of X-ray Absorption Spectroscopy of Trace Polyvalent Metals.

PubMed

Kerisit, Sebastien; Bylaska, Eric J; Massey, Michael S; McBriarty, Martin E; Ilton, Eugene S

2016-11-21

Incorporation of economically or environmentally consequential polyvalent metals into iron (oxyhydr)oxides has applications in environmental chemistry, remediation, and materials science. A primary tool for characterizing the local coordination environment of such metals, and therefore building models to predict their behavior, is extended X-ray absorption fine structure spectroscopy (EXAFS). Accurate structural information can be lacking yet is required to constrain and inform data interpretation. In this regard, ab initio molecular dynamics (AIMD) was used to calculate the local coordination environment of minor amounts of U incorporated in the structure of goethite (α-FeOOH). U oxidation states (VI, V, and IV) and charge compensation schemes were varied. Simulated trajectories were used to calculate the U L III -edge EXAFS function and fit experimental EXAFS data for U incorporated into goethite under reducing conditions. Calculations that closely matched the U EXAFS of the well-characterized mineral uraninite (UO 2 ), and constrained the S 0 2 parameter to be 0.909, validated the approach. The results for the U-goethite system indicated that U(V) substituted for structural Fe(III) in octahedral uranate coordination. Charge balance was achieved by the loss of one structural proton coupled to addition of one electron into the solid (-1 H + , +1 e - ). The ability of AIMD to model higher energy states thermally accessible at room temperature is particularly relevant for protonated systems such as goethite, where proton transfers between adjacent octahedra had a dramatic effect on the calculated EXAFS. Vibrational effects as a function of temperature were also estimated using AIMD, allowing separate quantification of thermal and configurational disorder. In summary, coupling AIMD structural modeling and EXAFS experiments enables modeling of the redox behavior of polyvalent metals that are incorporated in conductive materials such as iron (oxyhydr)oxides, with applications over a broad swath of chemistry and materials science.

Ab Initio Molecular Dynamics of Uranium Incorporated in Goethite (α-FeOOH): Interpretation of X-ray Absorption Spectroscopy of Trace Polyvalent Metals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kerisit, Sebastien; Bylaska, Eric J.; Massey, Michael S.

2016-11-21

Incorporation of economically or environmentally consequential polyvalent metals into iron (oxyhydr)oxides has applications in environmental chemistry, remediation, and materials science. A primary tool for characterizing the local coordination environment of such metals, and therefore building models to predict their behavior, is extended X-ray absorption fine structure spectroscopy (EXAFS). Accurate structural information can be lacking, yet is required to constrain and inform data interpretation. In this regard, ab initio molecular dynamics (AIMD) was used to calculate the local coordination environment of minor amounts of U incorporated in the structure of goethite (α-FeOOH). U oxidation state (VI, V, and IV) and chargemore » compensation scheme (CCS) were varied. Simulated trajectories were used to calculate the U LIII-edge EXAFS function and fit experimental EXAFS data for U incorporated into goethite under reducing conditions. Calculations that closely matched the U EXAFS of the well-characterized mineral uraninite (UO2), and constrained the S02 parameter to be 0.909, validated the approach. The results for the U-goethite system indicated that U(V) substituted for structural Fe(III) in octahedral uranate coordination. Charge balance was achieved by the loss of one structural proton coupled to injection of one electron into the solid (–1 H+, + 1 e-). The ability of AIMD to model higher-energy states thermally accessible at room temperature is particularly relevant for protonated systems such as goethite, where proton transfers between adjacent octahedra had a dramatic effect on the calculated EXAFS. Vibrational effects as a function of temperature were also estimated using AIMD, allowing separate quantification of thermal and configurational disorder. In summary, coupling AIMD structural modeling and EXAFS experiments enables modeling of the redox behavior of polyvalent metals that are incorporated in conductive materials such as iron (oxyhydr)oxides, with applications over a broad swath of chemistry and materials science.« less

A Pilot Chemical and Physical Stability Study of Extemporaneously Compounded Levetiracetam Intravenous Solution.

PubMed

Raphael, Chenzira D; Zhao, Fang; Hughes, Susan E; Juba, Katherine M

2015-01-01

Levetiracetam is a commonly used antiepileptic medication for tumor-related epilepsy. However, the 100 mL intravenous (IV) infusion volume can be burdensome to imminently dying hospice patients. A reduced infusion volume would improve patient tolerability. The purpose of this study was to evaluate the stability of 1000 mg/25 mL (40 mg/mL) levetiracetam IV solution in sodium chloride 0.9%. We prepared levetiracetam 40 mg/mL IV solution and added it to polyvinyl chloride (PVC) bags, polyolefin bags, and polypropylene syringes. Triplicate samples of each product were stored at refrigeration (2-8°C) and analyzed on days 0, 1, 4, 7, and 14. Samples were subjected to visual inspection, pH measurement, and stability-indicating high-performance liquid chromatography (HPLC) analysis. Over the 2-week storage period, there was no significant change in visual appearance or pH for any of the stability samples. The HPLC results confirmed that all stability samples retained 94.2-101.3% of initial drug concentration and no degradation products or leachable material from the packaging materials were observed. We conclude that levetiracetam 1000 mg/25 mL IV solution in sodium chloride 0.9% is physically and chemically stable for up to 14 days under refrigeration in polypropylene syringes, PVC bags, and polyolefin bags.

Sandia National Laboratories: Research: Research Foundations: Radiation

Science.gov Websites

Effects and High Energy Density Science Sandia National Laboratories Exceptional service in the Engineering Science Geoscience Materials Science Nanodevices & Microsystems Radiation Effects & High Science Geoscience Materials Science Nanodevices and Microsystems Radiation Effects and High Energy

Sandia National Laboratories: Research: Research Foundations

Science.gov Websites

Materials Science Nanodevices & Microsystems Radiation Effects & High Energy Density Science Science Geoscience Materials Science Nanodevices and Microsystems Radiation Effects and High Energy Nanodevices and Microsystems Radiation Effects and High Energy Density Science Exceptional service in the

Pre-Service Science Teachers Views on STEM Materials and STEM Competition in Instructional Technologies and Material Development Course

ERIC Educational Resources Information Center

Cetin, Ali; Balta, Nuri

2017-01-01

This qualitative study was designed to introduce STEM (Science, Technology, Engineering, Mathematics) activities to preservice science teachers and identify their views about STEM materials. In this context, a competition was organized with 42 preservice science teachers (13 male- 29 female) who took Instructional Technologies and Material…

Teachers and Science Curriculum Materials: Where We Are and Where We Need to Go

ERIC Educational Resources Information Center

Davis, Elizabeth A.; Janssen, Fred J. J. M.; Van Driel, Jan H.

2016-01-01

Curriculum materials serve as a key conceptual tool for science teachers, and better understanding how science teachers use these tools could help to improve both curriculum design and theory related to teacher learning and decision-making. The authors review the literature on teachers and science curriculum materials. The review is organised…

To Kit or Not to Kit? Evaluating and Implementing Science Materials and Resources

ERIC Educational Resources Information Center

Schiller, Ellen; Melin, Jacque; Bair, Mary

2016-01-01

With the release of the "Next Generation Science Standards," many schools are reexamining the science materials they are using. Textbook companies and kit developers are eager to meet the demand for "NGSS"-aligned teaching materials. Teacher may have been asked to serve on a science curriculum committee, or to evaluate current…

Teacher-Made Tactile Science Materials with Critical and Creative Thinking Activities for Learners Including Those with Visual Impairments

ERIC Educational Resources Information Center

Teske, Jolene K.; Gray, Phyllis; Kuhn, Mason A.; Clausen, Courtney K.; Smith, Latisha L.; Alsubia, Sukainah A.; Ghayoorad, Maryam; Rule, Audrey C.; Schneider, Jean Suchsland

2014-01-01

Gifted students with visual impairments are twice exceptional learners and may not evidence their advanced science aptitudes without appropriate accommodations for learning science. However, effective tactile science teaching materials may be easily made. Recent research has shown that when tactile materials are used with "all" students…

Materials Science Experiment Module Accommodation within the Materials Science Research Rack (MSRR-1) on the International Space Station (ISS)

NASA Technical Reports Server (NTRS)

Higgins, D. B.; Jayroe, R. R.; McCarley, K. S.

2000-01-01

The Materials Science Research Rack I (MSRR-1) of the Materials Science Research Facility (MSRF) is a modular facility designed to accommodate two Experiment Modules (EM) simultaneously on board the International Space Station (ISS). One of these EMs will be the NASA/ESA EM being, developed collaboratively by NASA and the European Space Agency. The other EM position will be occupied by various multi-user EMs that will be exchanged in-orbit to accommodate a variety of materials science investigations. This paper discusses the resources, services, and allocations available to the EMs and briefly describes performance capabilities of the EMs currently planned for flight.

TOWARD THE DEVELOPMENT OF A CONSENSUS MATERIALS DATABASE FOR PRESSURE TECHNOLGY APPLICATIONS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swindeman, Robert W; Ren, Weiju

The ASME construction code books specify materials and fabrication procedures that are acceptable for pressure technology applications. However, with few exceptions, the materials properties provided in the ASME code books provide no statistics or other information pertaining to material variability. Such information is central to the prediction and prevention of failure events. Many sources of materials data exist that provide variability information but such sources do not necessarily represent a consensus of experts with respect to the reported trends that are represented. Such a need has been identified by the ASME Standards Technology, LLC and initial steps have been takenmore » to address these needs: however, these steps are limited to project-specific applications only, such as the joint DOE-ASME project on materials for Generation IV nuclear reactors. In contrast to light-water reactor technology, the experience base for the Generation IV nuclear reactors is somewhat lacking and heavy reliance must be placed on model development and predictive capability. The database for model development is being assembled and includes existing code alloys such as alloy 800H and 9Cr-1Mo-V steel. Ownership and use rights are potential barriers that must be addressed.« less

The Crystal and Molecular Structure of Acetatochlorobis(4-methylpyridine)oxovanadium (IV)

NASA Technical Reports Server (NTRS)

Schupp, John D.; Hepp, Aloysius F.; Duraj, Stan A.; Richman, Robert M.; Fanwick, Phillip E.; Hakimzadeh, Roshanak (Technical Monitor)

2001-01-01

The crystal and molecular structure of the title compound, VOCl(O2CCH3)(4-CH3C5H4N)2, has been determined by single-crystal x-ray diffraction. The material crystallizes in the space group P 1(bar) (#2) with a = 7.822(2), b = 8.023(l), c = 14.841(2) Angstroms, alpha = 99.73(l), beta = 91.41(l), and gamma = 117.13(l). The coordination geometry around the vanadium is a highly distorted octahedron. The molecule is remarkable for being a monomeric oxovanadium (IV) carboxylate. A generalized synthetic strategy is proposed for the preparation of oxovanadium (IV) monomers.

46 CFR 390.5 - Agreement vessels.

Code of Federal Regulations, 2010 CFR

2010-10-01

... water-borne carriage of men, materials, goods or wares between: (i) Two points in the United States; (ii..., Great Lakes, noncontiguous domestic, or short sea transportation trade. (iv) Engaged primarily in the water-borne carriage of men, materials, goods or wares; and (v) Designated in the agreement as a...

46 CFR 390.5 - Agreement vessels.

Code of Federal Regulations, 2012 CFR

2012-10-01

... water-borne carriage of men, materials, goods or wares between: (i) Two points in the United States; (ii..., Great Lakes, noncontiguous domestic, or short sea transportation trade. (iv) Engaged primarily in the water-borne carriage of men, materials, goods or wares; and (v) Designated in the agreement as a...

46 CFR 390.5 - Agreement vessels.

Code of Federal Regulations, 2013 CFR

2013-10-01

... water-borne carriage of men, materials, goods or wares between: (i) Two points in the United States; (ii..., Great Lakes, noncontiguous domestic, or short sea transportation trade. (iv) Engaged primarily in the water-borne carriage of men, materials, goods or wares; and (v) Designated in the agreement as a...

46 CFR 390.5 - Agreement vessels.

Code of Federal Regulations, 2014 CFR

2014-10-01

... water-borne carriage of men, materials, goods or wares between: (i) Two points in the United States; (ii..., Great Lakes, noncontiguous domestic, or short sea transportation trade. (iv) Engaged primarily in the water-borne carriage of men, materials, goods or wares; and (v) Designated in the agreement as a...

46 CFR 390.5 - Agreement vessels.

Code of Federal Regulations, 2011 CFR

2011-10-01

... water-borne carriage of men, materials, goods or wares between: (i) Two points in the United States; (ii..., Great Lakes, noncontiguous domestic, or short sea transportation trade. (iv) Engaged primarily in the water-borne carriage of men, materials, goods or wares; and (v) Designated in the agreement as a...

Core IV Materials for Metropolitan Agriculture/Horticulture Programs.

ERIC Educational Resources Information Center

Hemp, Paul; And Others

This core curriculum guide consists of materials for use in presenting a 13-unit vocational agriculture course geared toward high school students living in metropolitan areas. Addressed in the individual units of the course are the following topics: employment in agricultural occupations, supervised occupational experience, leadership in…

10 CFR 2.1003 - Availability of material.

Code of Federal Regulations, 2013 CFR

2013-01-01

... its license application for a geologic repository, the NRC shall make available no later than thirty... privilege in § 2.1006, graphic-oriented documentary material that includes raw data, computer runs, computer... discrepancies; (ii) Gauge, meter and computer settings; (iii) Probe locations; (iv) Logging intervals and rates...

10 CFR 2.1003 - Availability of material.

Code of Federal Regulations, 2014 CFR

2014-01-01

... its license application for a geologic repository, the NRC shall make available no later than thirty... privilege in § 2.1006, graphic-oriented documentary material that includes raw data, computer runs, computer... discrepancies; (ii) Gauge, meter and computer settings; (iii) Probe locations; (iv) Logging intervals and rates...

Fiscal Officer Training Workshop, 1997. Participant's Guide.

ERIC Educational Resources Information Center

Department of Education, Washington, DC.

Extensive workshop materials are presented in this 1997 training guide for fiscal officers, business officers, bursars, loan managers, and others who have responsibility for Title IV college student financial aid programs. Workbook type material is provided for nine workshop sessions that cover the following topics: (1) Institutional…

Revision to Planetary Protection Policy for Mars Missions

NASA Technical Reports Server (NTRS)

DeVincenzi, D. L.; Stabekis, P.; Barengoltz, J.; Morrison, David (Technical Monitor)

1994-01-01

Under existing COSPAR policy adopted in 1984, missions to Mars (landers, probes, and some orbiters) are designated as Category IV missions. As such, the procedures for implementing planetary protection requirements could include trajectory biasing, cleanrooms, bioload reduction, sterilization of hardware, and bioshields, i. e. requirements could be similar to Viking. However, in 1992, a U. S. National Academy of Sciences study recommended that controls on forward contamination of Mars be tied to specific mission objectives. The report recommended that Mars landers with life detection instruments be subject to at least Viking-level sterilization procedures for bioload reduction, while spacecraft (including orbiters) without life detection instruments be subject to at least Viking-level pre sterilization procedures for bioload reduction but need not be sterilized. In light of this, it is proposed that the current policy's Category IV missions and their planetary protection requirements be divided into two subcategories as follows: Category IV A, for missions comprising landers and probes without life detection experiments and some orbiters, which will meet a specified bioburden limit for exposed surfaces; Category IV B, for landers and probes with life detection experiments, which will require complete system sterilization. For Category IV A missions, bioburden specifications will be proposed and implementing procedures discussed. A resolution will be proposed to modify the existing COSPAR policy to reflect these changes. Similar specifications, procedures, and resolution for Category IV B missions will be the subject of a later study.

Strategic Research Directions In Microgravity Materials Science

NASA Technical Reports Server (NTRS)

Clinton, Raymond G., Jr.; Wargo, Michael J.; Marzwell, Neville L.; Sanders, Gerald; Schlagheck, Ron; Semmes, Ed; Bassler, Julie; Cook, Beth

2004-01-01

The Office of Biological and Physical Research (OBPR) is moving aggressively to align programs, projects, and products with the vision for space exploration. Research in advanced materials is a critical element in meeting exploration goals. Research in low gravity materials science in OBPR is being focused on top priority needs in support of exploration: 1) Space Radiation Shielding; 2) In Situ Resource Utilization; 3) In Situ Fabrication and Repair; 4) Materials Science for Spacecraft and Propulsion Systems; 5) Materials Science for Advanced Life Support Systems. Roles and responsibilities in low gravity materials research for exploration between OBPR and the Office of Exploration Systems are evolving.

Princeton University Materials Academy for underrepresented students

NASA Astrophysics Data System (ADS)

Steinberg, Daniel; Rodriguez Martinez, Sara; Cody, Linda

Summer 2016 gave underrepresented high school students from Trenton New Jersey the opportunity to learn materials science, sustainability and the physics and chemistry of energy storage from Princeton University professors. New efforts to place this curriculum online so that teachers across the United States can teach materials science as a tool to teach ``real'' interdisciplinary science and meet the new Next Generation Science Standards (NGSS). The Princeton University Materials Academy (PUMA) is an education outreach program for underrepresented high school students. It is part of the Princeton Center for Complex Materials (PCCM), a National Science Foundation (NSF) funded Materials Research Engineering and Science Center (MRSEC). PUMA has been serving the community of Trenton New Jersey which is only eight miles from the Princeton University campus. We reached over 250 students from 2003-2016 with many students repeating for multiple years. 100% of our PUMA students have graduated high school and 98% have gone on for college. This is compared with overall Trenton district graduation rate of 48% and a free and reduced lunch of 83%. We discuss initiatives to share the curriculum online to enhance the reach of PCCM' PUMA and to help teachers use materials science to meet NGSS and give their students opportunities to learn interdisciplinary science. MRSEC, NSF (DMR-1420541).

Research on Schools, Neighborhoods and Communities: Toward Civic Responsibility

ERIC Educational Resources Information Center

Tate, William F., IV, Ed.

2012-01-01

"Research on Schools, Neighborhoods, and Communities: Toward Civic Responsibility" focuses on research and theoretical developments related to the role of geography in education, human development, and health. William F. Tate IV, the Edward Mallinckrodt Distinguished University Professor in Arts & Sciences at Washington University in…

REVIEW IV: SCIENCE LINKING ENVIRONMENTAL CONTAMINANT EXPOSURES WITH FERTILITY AND REPRODUCTIVE HEALTH IMPACTS IN THE ADULT FEMALE

EPA Science Inventory

Design: Reviewed articles indexed in PubMed from 1999-2007 addressing environment and puberty, menstrual and ovarian function, fertility, and menopause. Results: The strongest evidence of environmental contaminant exposures interfering with healthy reproductive function in adu...

ASTRONAUTICS INFORMATION. ABSTRACTS, VOLUME IV, NO. 5. Abstracts 4,428- 4,521

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hardgrove, B.J.; Warren, F.L. comps.

1961-11-01

A bibliography on astronautics is presented covering the period of November 1961. The 93 references are on flight dynamics, vehicle technology, communications, guidance, control, manned flight, space medicine, and space science. Author, subject, and source indexes are included. (M.C.G.)

Nuffield Secondary Science, Theme 7, Using Materials.

ERIC Educational Resources Information Center

Blackledge, J.; And Others

Nuffield Secondary Science is a set of tested materials from which teachers can prepare courses for students in grades 9-11 (approximately) who do not intend to major in science. The materials are designed for British secondary schools but are adaptable for other countries. The Teachers' Guide to the entire set of materials is described in SE 015…

Elementary Students' Learning of Materials Science Practices through Instruction Based on Engineering Design Tasks

ERIC Educational Resources Information Center

Wendell, Kristen Bethke; Lee, Hee-Sun

2010-01-01

Materials science, which entails the practices of selecting, testing, and characterizing materials, is an important discipline within the study of matter. This paper examines how third grade students' materials science performance changes over the course of instruction based on an engineering design challenge. We conducted a case study of nine…

Advanced Risk Reduction Tool (ARRT) Special Case Study Report: Science and Engineering Technical Assessments (SETA) Program

NASA Technical Reports Server (NTRS)

Kirsch, Paul J.; Hayes, Jane; Zelinski, Lillian

2000-01-01

This special case study report presents the Science and Engineering Technical Assessments (SETA) team's findings for exploring the correlation between the underlying models of Advanced Risk Reduction Tool (ARRT) relative to how it identifies, estimates, and integrates Independent Verification & Validation (IV&V) activities. The special case study was conducted under the provisions of SETA Contract Task Order (CTO) 15 and the approved technical approach documented in the CTO-15 Modification #1 Task Project Plan.

Biomedical Science, Unit IV: The Nervous System in Health and Medicine. The Nervous System; Disorders of the Brain and Nervous System; Application of Computer Science to Diagnosis; Drugs and Pharmacology; The Human Senses; Electricity. Laboratory Manual. Revised Version, 1976.

ERIC Educational Resources Information Center

Biomedical Interdisciplinary Curriculum Project, Berkeley, CA.

Designed to accompany the student text on the nervous system, this manual presents laboratory activities dealing with concepts presented in the text. Thirty-seven activities are described. Four supplementary activities dealing with concepts in electricity are also included. Laboratory activities are divided into several parts, each part covering a…

Analysis of the United States Computer Emergency Readiness Team’s (U.S. CERT) EINSTEIN III Intrusion Detection System, and Its Impact on Privacy

DTIC Science & Technology

2013-03-01

Arlington, VA 22202–4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704–0188) Washington DC 20503. 1. AGENCY USE ONLY...University, 2004 Submitted in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE IN INFORMATION TECHNOLOGY MANAGEMENT...Fulp Second Reader Dr. Dan Boger Chair, Department of Information Sciences iv THIS PAGE INTENTIONALLY LEFT BLANK v ABSTRACT To secure

Student Assistance General Provisions; Federal Pell Grant Program; Academic Competitiveness Grant Program; and National Science and Mathematics Access to Retain Talent Grant Program. Final Rule. Federal Register, Part IV, Department of Education, 34 CFR Parts 668, 690, and 691

ERIC Educational Resources Information Center

National Archives and Records Administration, 2006

2006-01-01

The Secretary is adopting as final, with changes, interim final regulations in: 34 CFR part 691 for the Academic Competitiveness Grant (ACG) and National Science and Mathematics Access to Retain Talent Grant (National SMART Grant) programs; 34 CFR part 668 (Student Assistance General Provisions); and 34 CFR part 690 (Federal Pell Grant Program).…

Dynamics of a surge observed in the C IV and H alpha lines

NASA Technical Reports Server (NTRS)

Schmieder, B.; Mein, P.; Vial, J.-C.; Tandberg-Hanssen, E.

1983-01-01

Time sequences of a surge have been obtained in Active Region 2701 during a coordinated SMY program, on October 2nd, 1980, while the MSDP spectrograph operated in H-alpha at the Meudon Solar Tower and the UVSP spectrometer on SMM observed in the 1548 A C IV resonance line. The cold (H-alpha) and hot (C IV) material follow the same channel, and the event lasts about 10 min in both lines. A good correlation is found between H-alpha and C IV velocities; radial velocities along the surge are in the range 40-60 km/s in both cases. The observations are consistent with the hypothesis that a pressure gradient drives the surge. The H-alpha data seem to indicate the presence of a shock wave in the chromosphere, while the C IV quantities (velocities, accelerations) vary on a very short time scale. Their maxima occur at some locations which could be interpreted as 'pinched' zones.

Systematic review of "filling" procedures for lip augmentation regarding types of material, outcomes and complications.

PubMed

San Miguel Moragas, Joan; Reddy, Rajgopal R; Hernández Alfaro, Federico; Mommaerts, Maurice Y

2015-07-01

The ideal lip augmentation technique provides the longest period of efficacy, lowest complication rate, and best aesthetic results. A myriad of techniques have been described for lip augmentation, but the optimal approach has not yet been established. This systematic review with meta-regression will focus on the various filling procedures for lip augmentation (FPLA), with the goal of determining the optimal approach. A systematic search for all English, French, Spanish, German, Italian, Portuguese and Dutch language studies involving FPLA was performed using these databases: Elsevier Science Direct, PubMed, Highwire Press, Springer Standard Collection, SAGE, DOAJ, Sweetswise, Free E-Journals, Ovid Lippincott Williams & Wilkins, Willey Online Library Journals, and Cochrane Plus. The reference section of every study selected through this database search was subsequently examined to identify additional relevant studies. The database search yielded 29 studies. Nine more studies were retrieved from the reference sections of these 29 studies. The level of evidence ratings of these 38 studies were as follows: level Ib, four studies; level IIb, four studies; level IIIb, one study; and level IV, 29 studies. Ten studies were prospective. This systematic review sought to highlight all the quality data currently available regarding FPLA. Because of the considerable diversity of procedures, no definitive comparisons or conclusions were possible. Additional prospective studies and clinical trials are required to more conclusively determine the most appropriate approach for this procedure. IV. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Palladium-directed self-assembly of multi-titanium(IV)-porphyrin arrays on the substrate surface as sensitive ultrathin films for hydrogen peroxide sensing, photocurrent generation, and photochromism of viologen

NASA Astrophysics Data System (ADS)

He, Wen-Li; Fang, Fang; Ma, Dong-Mei; Chen, Meng; Qian, Dong-Jin; Liu, Minghua

2018-01-01

Multiporphyrin arrays are large, π-conjugated chromophores with high absorption efficiency and strong chemical stability that play an important role in supramolecular and advanced material sciences. Palladium-directed self-assembly of multiporphyrin array ultrathin films was achieved on substrate surfaces using oxo[5,10,15,20-tetra(4-pyridyl)porphyrinato]titanium (IV) complex [TiO(TPyP)] as a linker and sodium tetrachloropalladate (Na2PdCl4) as a connector. The Pd-TiOTPyP films as prepared were characterized by using UV-vis absorption and X-ray photoelectron spectroscopy, as well as by atomic force and scanning electron microscopy. The Soret absorption band of TiOTPyP was observed to red shift by 6 nm when the Pd-TiOTPyP multilayer-modified quartz substrate was immersed in an aqueous solution containing hydrogen peroxide. This was attributed to the formation of a TiO2TPyP monoperoxo complex. This oxidation reaction could be accelerated in an acidic solution. Furthermore, the immobilized Pd-TiOTPyP multilayers could act as light-harvesting units for photocurrent generation and photochromism of viologens, with strong stability, reproducibility, and recyclability. The photocurrent density could be enhanced in electrolyte solutions containing electron donors such as triethanolamine, or electron acceptors such as viologens. Finally, photoinduced reduction (photochromism) of viologens was investigated using the Pd-TiOTPyP multilayers as light sensitizers and EDTA as the electron donors.

Recycled material-based science instruments to support science education in rural area at Central Sulawesi District of Indonesia

NASA Astrophysics Data System (ADS)

Ali, M.; Supriyatman; Saehana, S.

2018-03-01

It has been successfully designing low cost of science experiment from recycled materials. The science instruments were produced to explain expansion concept and hydrostatic pressure inside the liquid. Science instruments were calibrated and then validated. It was also implemented in science learning.

Fostering Student Sense Making in Elementary Science Learning Environments: Elementary Teachers' Use of Science Curriculum Materials to Promote Explanation Construction

ERIC Educational Resources Information Center

Zangori, Laura; Forbes, Cory T.; Biggers, Mandy

2013-01-01

While research has shown that elementary (K-5) students are capable of engaging in the scientific practice of explanation construction, commonly-used elementary science curriculum materials may not always afford them opportunities to do so. As a result, elementary teachers must often adapt their science curriculum materials to better support…

The Effectiveness of Substituting Locally Available Materials in Teaching Chemistry in Nigeria: A Case for Science Education in Developing Countries

ERIC Educational Resources Information Center

DomNwachukwu, Nkechi S.; DomNwachukwu, Chinaka S.

2006-01-01

This article investigates the effectiveness of improvising locally available materials for teaching chemistry in Nigeria, as a case for a culture of improvisation for teaching the sciences in developing countries. The scarcity and cost of imported materials for teaching science has remained a major challenge to teaching sciences in developing…

Considerations of Alloy 617 Application in the Gen IV Nuclear Reactor Systems - Part II: Metallurgical Property Challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Weiju

2010-01-01

Alloy 617 is currently considered as a leading candidate material for high temperature components in the Gen IV Nuclear Reactor Systems. Because of the unprecedented severe working conditions beyond its commercial service experience required by the Gen IV systems, the alloy faces various challenges in both mechanical and metallurgical properties. Following a previous paper discussing the mechanical property challenges, this paper is focused on the challenges and issues in metallurgical properties of the alloy for the intended nuclear application. Considerations are given in details about its metallurgical stability and aging evolution, aging effects on mechanical properties, potential Co hazard, andmore » internal oxidation. Some research and development activities are suggested with discussions on viability to satisfy the Gen IV Nuclear Reactor System needs.« less

The contribution of Niels Daan to fisheries science: Changing the perspective from single-species to the ecosystem

NASA Astrophysics Data System (ADS)

Rijnsdorp, Adriaan D.; Dekker, Willem; Heessen, Henk J. L.

We describe the career of Professor Niels Daan at the governmental Netherlands Institute for Fisheries Research (RIVO) and analyse his role in the development of fisheries science, in the Netherlands as well as in the International Council for the Exploration of the Sea (ICES). Major contributions are (i) his research on the interactions between cod and its prey; (ii) the standardization, data base development and quality control of the ICES International Bottom Trawl Survey; (iii) his role as editor-in-chief of the ICES Journal of Marine Science; (iv) his role in stimulating new approaches and critically questioning the science behind the advice; (v) his often silent support to a wide group of young fisheries scientists.

40 CFR 49.126 - Rule for limiting fugitive particulate matter emissions.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., and other surfaces that can create airborne dust. (iii) Full or partial enclosure of materials... particulate matter from becoming airborne. (iv) Implementation of good housekeeping practices to avoid or minimize the accumulation of dusty materials that have the potential to become airborne, and the prompt...

A STUDY OF THE FEASIBILITY OF UTILIZING SOLID WASTES FOR BUILDING MATERIALS. PHASE III AND IV SUMMARY REPORTS

EPA Science Inventory

This report summarizes work to develop building materials containing inorganic and organic wastes and wastes-derived products. Attempts were made to produce full-scale products and qualify them for structural applications. Particle board panels were made of peanut hulls and wood ...

Air Conditioning and Refrigeration Book IV.

ERIC Educational Resources Information Center

Eckes, William; Fulkerson, Dan

This publication is the concluding text in a four-part curriculum for air conditioning and refrigeration. Materials in Book 4 are designed to complement theoretical and functional elements in Books 1-3. Instructional materials in this publication are written in terms of student performance using measurable objectives. The course includes six…

75 FR 44031 - Goldman, Sachs & Co., et al.; Notice of Application and Temporary Order

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-27

... International (``GSAMI''), Goldman Sachs Hedge Fund Strategies LLC (``GSHFS''), Commonwealth Annuity and Life... marketing materials used in connection with residential mortgage-related securities offerings by Goldman... marketing materials, (iv) where Goldman Sachs is the lead underwriter of an offering of residential mortgage...

GLOBE Mission Earth: The evaluation of the first year's implementation.

NASA Astrophysics Data System (ADS)

Adaktylou, N. E.; Hedley, M. L.; Darche, S.; Harris-Stefanakis, E.; Silberglitt, M. D.; Struble, J.; Bingham, P.; Czajkowski, K.

2017-12-01

Here we present the evaluation findings for the first year of implementation of the `Mission Earth' Program.`Mission Earth' proposes the systematic embedding of GLOBE (Global Learning and Observations to Benefit the Environment) resources and NASA assets into the curricula of schools along the K-12 continuum, leveraging existing partnerships and networks. The main goal of the program is to create developmentally appropriate, vertically-integrated K-12 materials and activities,, supported by high quality professional development and ongoing support, engaging teachers from all grades. Its team consists of 5 geographically distributed universities and research institutions that have developed a curriculum progression following research-based best practices, have conducted the year's trainings for selected cohorts of teachers. The evaluation is a continuous process over the program's five year duration to examine implementation and opportunities for improvement. A broad set of data collection tools include a diagnostic component (needs assessment for teachers, capacity assessment for the school environment) and an assessment of implementation component (surveys for teachers and trainers, pre- and post tests for students, classroom observations, teacher interviews, portfolios). The tools used are validated instruments or ones modified to serve the program needs. The patterns emerging from the data provided information on: i) the quality of the intervention as to its design and content, ii) the alignment with the needs of the participants, iii) the implementation phase, iii) changes in the content knowledge of the students and their attitudes toward science, iv) changes in the facility of teachers to teach science in their classrooms after the professional development and materials provided, v) challenges and facilitators of implementation. Based on findings the program evaluation identifies additions/adjustments to be adopted in the following year.

The influence of liberal political ideology on nursing science.

PubMed

Browne, A J

2001-06-01

Previous notions of science as impartial and value-neutral have been refuted by contemporary views of science as influenced by social, political and ideological values. By locating nursing science in the dominant political ideology of liberalism, the author examines how nursing knowledge is influenced by liberal philosophical assumptions. The central tenets of liberal political philosophy - individualism, egalitarianism, freedom, tolerance, neutrality, and a free-market economy - are primarily manifested in relation to: (i) the individualistic focus of our science; (ii) our view of society as essentially egalitarian and equitable; (iii) our preference for politically neutral knowledge development, and (iv) an economy of knowledge development that supports rather than challenges the status quo. I argue that exposing, rather than ignoring, the liberal ideological values inherent in nursing science will render these assumptions open to debate, stimulate ongoing development of critically oriented knowledge, and increase our capacity to influence the social, political and economic determinants of health.

A 37-mm Ceramic Gun Nozzle Stress Analysis

DTIC Science & Technology

2006-05-01

Figures iv List of Tables iv 1 . Introduction 1 2. Ceramic Nozzle Structure and Materials 1 3. Sequentially-Coupled and Fully-Coupled Thermal Stress...FEM Analysis 1 4. Ceramic Nozzle Thermal Stress Response 4 5. Ceramic Nozzle Dynamic FEM 7 6. Ceramic Nozzle Dynamic Responses and Discussions 8 7...candidate ceramics and the test fixture model components are listed in table 1 . 3. Sequentially-Coupled and Fully-Coupled Thermal Stress FEM Analysis

Hombres y Lugares. Que Bonito Es Leer, II. Libro IV. Guia Para el Maestro (Men and Places. How Nice Reading Is, II. Book IV. Teacher's Guide).

ERIC Educational Resources Information Center

Dissemination and Assessment Center for Bilingual Education, Austin, TX.

The teacher's guide, written in Spanish, and the reader and workbook of the same title, form the fourth level in a series of supplemental instructional materials designed for teaching reading in Spanish to second grade students. Following an introduction and a detailed list of objectives for each of the five to eight lessons per unit, there are…

Hombres y Lugares. Que Bonito Es Leer, II. Libro IV. Libro de Lectura (Men and Places. How Nice Reading Is, II. Book IV. Reading Book).

ERIC Educational Resources Information Center

Dissemination and Assessment Center for Bilingual Education, Austin, TX.

With the accompanying workbook and teacher's guide, this reader comprises the fourth and last level of a series of supplementary instructional materials for teaching reading in Spanish to second grade students. There are six stories, each from 8 to 14 pages in length, and one "corrido". All are written in Spanish. Black and white illustrations…

Magnetically modulated electroluminescence from hybrid organic/inorganic light-emitting diodes based on electron donor-acceptor exciplex blends

NASA Astrophysics Data System (ADS)

Pang, Zhiyong; Baniya, Sangita; Zhang, Chuang; Sun, Dali; Vardeny, Z. Valy

2016-03-01

We report room temperature magnetically modulated electroluminescence from a hybrid organic/inorganic light-emitting diode (h-OLED), in which an inorganic magnetic tunnel junction (MTJ) with large room temperature magnetoresistance is coupled to an N,N,N ',N '-Tetrakis(4-methoxyphenyl)benzidine (MeO-TPD): tris-[3-(3-pyridyl)mesityl]borane (3TPYMB) [D-A] based OLED that shows thermally activated delayed luminescence. The exciplex-based OLED provides two spin-mixing channels: upper energy channel of polaron pairs and lower energy channel of exciplexes. In operation, the large resistance mismatch between the MTJ and OLED components is suppressed due to the non-linear I-V characteristic of the OLED. This leads to enhanced giant magneto-electroluminescence (MEL) at room temperature. We measured MEL of ~ 75% at ambient conditions. Supported by SAMSUNG Global Research Outreach (GRO) program, and also by the NSF-Material Science & Engineering Center (MRSEC) program at the University of Utah (DMR-1121252).

Information and the Nature of Reality

NASA Astrophysics Data System (ADS)

Davies, Paul; Gregersen, Niels Henrik

2014-05-01

1. Introduction: does information matter?; Paul Davies and Niels Henrik Gregersen; Part I. History: 2. From matter to materialism and (almost) back Ernan McMullin; 3. Unsolved dilemmas: the concept of matter in the history of philosophy and in contemporary physics Philip Clayton; Part II. Physics: 4. Universe from bit Paul Davies; 5. The computational universe Seth Lloyd; 6. Minds and values in the quantum universe Henry Pierce Stapp; Part III. Biology: 7. The concept of information in biology John Maynard Smith; 8. Levels of information: Shannon-Bolzmann-Darwin Terrence W. Deacon; 9. Information and communication in living matter Bernd-Olaf Kuppers; 10. Semiotic freedom: an emerging force Jesper Hoffmeyer; 11. Care on earth: generating informed concern Holmes Rolston; Part IV. Philosophy and Theology: 12. The sciences of complexity - a new theological resource? Arthur Peacocke; 13. God as the ultimate informational principle Keith Ward; 14. Information, theology and the universe John F. Haught; 15. God, matter, and information: towards a Stoicizing Logos christology Niels Henrik Gregersen; 16. What is the 'spiritual body'? Michael Welker; Index.

Information and the Nature of Reality

NASA Astrophysics Data System (ADS)

Davies, Paul; Gregersen, Niels Henrik

2010-09-01

1. Introduction: does information matter?; Paul Davies and Niels Henrik Gregersen; Part I. History: 2. From matter to materialism and (almost) back Ernan McMullin; 3. Unsolved dilemmas: the concept of matter in the history of philosophy and in contemporary physics Philip Clayton; Part II. Physics: 4. Universe from bit Paul Davies; 5. The computational universe Seth Lloyd; 6. Minds and values in the quantum universe Henry Pierce Stapp; Part III. Biology: 7. The concept of information in biology John Maynard Smith; 8. Levels of information: Shannon-Bolzmann-Darwin Terrence W. Deacon; 9. Information and communication in living matter Bernd-Olaf Küppers; 10. Semiotic freedom: an emerging force Jesper Hoffmeyer; 11. Care on earth: generating informed concern Holmes Rolston; Part IV. Philosophy and Theology: 12. The sciences of complexity - a new theological resource? Arthur Peacocke; 13. God as the ultimate informational principle Keith Ward; 14. Information, theology and the universe John F. Haught; 15. God, matter, and information: towards a Stoicizing Logos christology Niels Henrik Gregersen; 16. What is the 'spiritual body'? Michael Welker; Index.

How cutting-edge technologies impact the design of electrochemical (bio)sensors for environmental analysis. A review.

PubMed

Arduini, Fabiana; Cinti, Stefano; Scognamiglio, Viviana; Moscone, Danila; Palleschi, Giuseppe

2017-03-22

Through the years, scientists have developed cutting-edge technologies to make (bio)sensors more convenient for environmental analytical purposes. Technological advancements in the fields of material science, rational design, microfluidics, and sensor printing, have radically shaped biosensor technology, which is even more evident in the continuous development of sensing systems for the monitoring of hazardous chemicals. These efforts will be crucial in solving some of the problems constraining biosensors to reach real environmental applications, such as continuous analyses in field by means of multi-analyte portable devices. This review (with 203 refs.) covers the progress between 2010 and 2015 in the field of technologies enabling biosensor applications in environmental analysis, including i) printing technology, ii) nanomaterial technology, iii) nanomotors, iv) biomimetic design, and (v) microfluidics. Next section describes futuristic cutting-edge technologies that are gaining momentum in recent years, which furnish highly innovative aspects to biosensing devices. Copyright © 2016 Elsevier B.V. All rights reserved.

Research Opportunities Supporting the Vision for Space Exploration from the Transformation of the Former Microgravity Materials Science Program

NASA Technical Reports Server (NTRS)

Clinton, R. G., Jr.; Szofran, Frank; Bassler, Julie A.; Schlagheck, Ronald A.; Cook, Mary Beth

2005-01-01

The Microgravity Materials Science Program established a strong research capability through partnerships between NASA and the scientific research community. With the announcement of the vision for space exploration, additional emphasis in strategic materials science areas was necessary. The President's Commission recognized that achieving its exploration objectives would require significant technical innovation, research, and development in focal areas defined as "enabling technologies." Among the 17 enabling technologies identified for initial focus were: advanced structures, advanced power and propulsion; closed-loop life support and habitability; extravehicular activity systems; autonomous systems and robotics; scientific data collection and analysis, biomedical risk mitigation; and planetary in situ resource utilization. Mission success may depend upon use of local resources to fabricate a replacement part to repair a critical system. Future propulsion systems will require materials with a wide range of mechanical, thermophysical, and thermochemical properties, many of them well beyond capabilities of today's materials systems. Materials challenges have also been identified by experts working to develop advanced life support systems. In responding to the vision for space exploration, the Microgravity Materials Science Program aggressively transformed its research portfolio and focused materials science areas of emphasis to include space radiation shielding; in situ fabrication and repair for life support systems; in situ resource utilization for life support consumables; and advanced materials for exploration, including materials science for space propulsion systems and for life support systems. The purpose of this paper is to inform the scientific community of these new research directions and opportunities to utilize their materials science expertise and capabilities to support the vision for space exploration.

Preparation of graphene oxide-manganese dioxide for highly efficient adsorption and separation of Th(IV)/U(VI).

PubMed

Pan, Ning; Li, Long; Ding, Jie; Li, Shengke; Wang, Ruibing; Jin, Yongdong; Wang, Xiangke; Xia, Chuanqin

2016-05-15

Manganese dioxide decorated graphene oxide (GOM) was prepared via fixation of crystallographic MnO2 (α, γ) on the surface of graphene oxide (GO) and was explored as an adsorbent material for simultaneous removal of thorium/uranium ions from aqueous solutions. In single component systems (Th(IV) or U(VI)), the α-GOM2 (the weight ratio of GO/α-MnO2 of 2) exhibited higher maximum adsorption capacities toward both Th(IV) (497.5mg/g) and U(VI) (185.2 mg/g) than those of GO. In the binary component system (Th(IV)/U(VI)), the saturated adsorption capacity of Th(IV) (408.8 mg/g)/U(VI) (66.8 mg/g) on α-GOM2 was also higher than those on GO. Based on the analysis of various data, it was proposed that the adsorption process may involve four types of molecular interactions including coordination, electrostatic interaction, cation-pi interaction, and Lewis acid-base interaction between Th(IV)/U(VI) and α-GOM2. Finally, the Th(IV)/U(VI) ions on α-GOM2 can be separated by a two-stage desorption process with Na2CO3/EDTA. Those results displayed that the α-GOM2 may be utilized as an potential adsorbent for removing and separating Th(IV)/U(VI) ions from aqueous solutions. Copyright © 2016 Elsevier B.V. All rights reserved.

Hong Kong secondary school students' attitudes towards science: a study of structural models and gender differences

NASA Astrophysics Data System (ADS)

Wan, Zhi Hong; Lee, John Chi Kin

2017-03-01

This study explored two under-researched areas on students' attitudes towards science, that is, the structural models representing these attitudes and the role played by school bands in moderating the gender differences in such attitudes. The participants were 360 ninth graders in Hong Kong from 3 school bands. The structural equation modelling method was adopted to compare four hypothetical models for students' attitudes towards science. Results reflect that (i) the data supported the three-factor structure of the behavioural domain of students' attitudes towards science; (ii) the four lower level dimensions of the attitudes towards science (i.e. value of science to society, self-concept in science, anxiety towards science and enjoyment of science) could be further integrated into broader categories; (iii) male students demonstrated significantly more positive attitudes towards science in five dimensions (i.e. self-concept in science, enjoyment in science, learning science in and outside the classroom and future participation) and (iv) school bands played a prominent moderating role in gender differences in students' attitudes towards science. Implications for studying and developing students' attitudes towards science are discussed in the paper.

Mapping of RBE-Weighted Doses Between HIMAC- and LEM-Based Treatment Planning Systems for Carbon Ion Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steinstraeter, Olaf, E-mail: o.steinstraeter@gsi.de; Gruen, Rebecca; Institut fuer Medizinische Physik und Strahlenschutz, TH-Mittelhessen, Giessen

2012-11-01

Purpose: A method was developed to convert clinically prescribed RBE (Relative Biological Effectiveness)-weighted doses from the approach used at the Heavy-Ion Medical Accelerator (HIMAC) at the National Institute of Radiological Science, Chiba, Japan, to the LEM (Local Effect Model)-based TReatment planning for Particles (TRiP98) approach used in the pilot project at the GSI Helmholtzzentrum, Darmstadt, and the Heidelberg Ion-Beam Therapy Center (HIT). Methods and Materials: The proposed conversion method is based on a simulation of the fixed spread-out Bragg peak (SOBP) depth dose profiles as used for the irradiation at HIMAC by LEM/TRiP98 and a recalculation of the resulting RBE-weightedmore » dose distribution. We present data according to the clinical studies conducted at GSI in the past decade (LEM I), as well as data used in current studies (refined LEM version: LEM IV). Results: We found conversion factors (RBE-weighted dose LEM/RBE-weighted dose HIMAC) reaching from 0.4 to 2.0 for prescribed carbon ion doses from 1 to 60 Gy (RBE) for SOBP extensions ranging from 20 to 120 mm according to the HIMAC approach. A conversion factor of 1.0 was found for approximately 5 Gy (RBE). The conversion factor decreases with increasing prescribed dose. Slightly smaller values for the LEM IV-based data set compared with LEM I were found. A significant dependence of the conversion factor from the SOBP width could be observed in particular for LEM IV, whereas the depth dependence was found to be small. Conclusions: For the interpretation and comparison of clinical trials performed at HIMAC and GSI/HIT, it is of extreme importance to consider these conversion factors because according to the various methods to determine the RBE-weighted dose, similar dose values might not necessarily be related to similar clinical outcomes.« less

Aircraft Environmental System Mechanic, 2-9. Block IV--Utility Systems and Flight Line Maintenance. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This publication contains a teaching guide and student instructional materials for conducting a high school or adult vocational education course to train persons to perform duties as an aircraft environmental systems mechanic. The instructional design for this course is self-paced and/or small group-paced. Instructor materials contained in the…

Overview of NASA's Microgravity Materials Science Program

NASA Technical Reports Server (NTRS)

Downey, James Patton

2012-01-01

The microgravity materials program was nearly eliminated in the middle of the aughts due to budget constraints. Hardware developments were eliminated. Some investigators with experiments that could be performed using ISS partner hardware received continued funding. Partnerships were established between US investigators and ESA science teams for several investigations. ESA conducted peer reviews on the proposals of various science teams as part of an ESA AO process. Assuming he or she was part of a science team that was selected by the ESA process, a US investigator would submit a proposal to NASA for grant funding to support their part of the science team effort. In a similar manner, a US materials investigator (Dr. Rohit Trivedi) is working as a part of a CNES selected science team. As funding began to increase another seven materials investigators were selected in 2010 through an NRA mechanism to perform research related to development of Materials Science Research Rack investigations. One of these has since been converted to a Glovebox investigation.

Barcelona Rocks, a mobile app to learn geology in your city

NASA Astrophysics Data System (ADS)

Geyer, Adelina; Cabrera, Lluis; Alias, Gemma; Aulinas, Meritxell; Becerra, Margarita; Casadellà, Jordi; Clotet, Roger; Delclós, Xavier; Fernández-Turiel, José-Luis; Tarragó, Marta; Travé, Anna

2016-04-01

Barcelona Rocks is an application for personal mobile devices suitable for secondary and high school students as well as the general public without a solid background in Earth Sciences. The main objective of this app is to teach Geology using as learning resource our city façades and pavements. Additionally, Barcelona Rocks provides a short explanation about the significance of the appearance of the different rock types at the different historical periods of the city. Although it has been designed as a playful learning resource for secondary school students, the level of knowledge also allows bringing some basic concepts and principles of Earth Sciences to the general public, irrespective of age. This app is intended to provide the degree of interactivity and entertainment required by the different individual users and aims to: (i) Explain the techniques and experiments that allow the user to identify the different rocks, as well as their genesis. (ii) Introduce geology to the youngest users in a more attractive and entertaining way, providing also some information regarding the use of the different ornamental rocks during the different historical periods of the city: roman, medieval, etc. (iii) Provide historical and architectural information of the selected buildings in order to improve the city's historical architectural knowledge of the users. (iv) Show the non-expert public the importance of their country's geology. (v) Develop of outreach and dissemination resources taking advantage of the versatile and potent mobile application format using also the content as support material for science courses, seminars, or social learning events. (vi) Encourage new generations of Earth Scientists (vii) Promote science and scientific culture of the society, integrating culture and innovation as essential for the emergence of new scientific and technological vocations, promoting critical thinking, understanding of the scientific method and the social interest in science, technology and innovation.

75 FR 60091 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-29

... Engineering Command, Armament Research, Development and Engineering Center (ARDEC); Correction AGENCY: Office... employees at the Army Research, Development and Engineering Command, Armament Research, Development and Engineering Center (ARDEC). Within that notice the descriptors for levels IV and V are incorrect under factor...

A "Canned" Computer Lab

ERIC Educational Resources Information Center

Dowling, John, Jr.

1972-01-01

Discusses the use of a set of computer programs (FORTRAN IV) in an introductory mechanics course for science majors. One laboratory activity is described for determining the coefficient of restitution of a glider on an air track. A student evaluation for the lab is included in the appendix. (Author/TS)

Preservice Elementary Teachers' Adaptation of Science Curriculum Materials for Inquiry-Based Elementary Science

ERIC Educational Resources Information Center

Forbes, Cory T.

2011-01-01

Curriculum materials are important resources with which teachers make pedagogical decisions about the design of science learning environments. To become well-started beginning elementary teachers capable of engaging their students in inquiry-based science, preservice elementary teachers need to learn to use science curriculum materials…

Administration of intravenous morphine for acute pain in the emergency department inflicts an economic burden in Europe

PubMed Central

Casamayor, Montserrat; Hennebert, Marc; Brazzi, Luca; Prosen, Gregor

2018-01-01

Background Acute pain is among the leading causes of referral to the emergency department (ED) in industrialized countries. Its management mainly depends on intensity. Moderate-to-severe pain is treated with intravenous (IV) administered opioids, of which morphine is the most commonly used in the ED. We have estimated the burden of IV administration of morphine in the five key European countries (EU5) using a micro-costing approach. Scope A structured literature review was conducted to identify clinical guidelines for acute pain management in EU5 and clinical studies conducted in the ED setting. The data identified in this literature review constituted the source for all model input parameters, which were clustered as analgesic (morphine), material used for IV morphine administration, nurse workforce time and management of morphine-related adverse events and IV-related complications. Findings The cost per patient of IV morphine administration in the ED ranges between €18.31 in Spain and €28.38 in Germany. If costs associated with the management of morphine-related adverse events and IV-related complications are also considered, the total costs amount to €121.13–€132.43. The main driver of those total costs is the management of IV-related complications (phlebitis, extravasation and IV prescription errors; 73% of all costs) followed by workforce time (14%). Conclusions IV morphine provides effective pain relief in the ED, but the costs associated with the IV administration inflict an economic burden on the respective national health services in EU5. An equally rapid-onset and efficacious analgesic that does not require IV administration could reduce this burden. PMID:29675049

Co-modification of amorphous-Ti(IV) hole cocatalyst and Ni(OH)2 electron cocatalyst for enhanced photocatalytic H2-production performance of TiO2

NASA Astrophysics Data System (ADS)

Wang, Ping; Lu, Yanggang; Wang, Xuefei; Yu, Huogen

2017-01-01

Highly efficient TiO2 photocatalysts co-modified by amorphous-Ti(IV) hole cocatalyst and Ni(OH)2 electron cocatalyst (referred to as Ni(OH)2-Ti(IV)/TiO2) were prepared by facile two-step process which was the initial formation of amorphous Ti(IV) on the TiO2 surface via hydrolysis method and the following formation of Ni(OH)2 via precipitation reaction. It was found that the Ni(OH)2-Ti(IV)/TiO2 showed obviously high hydrogen-production performance. When the amount of Ni(OH)2 and Ti(IV) was 1 wt% and 0.1 wt%, respectively, the hydrogen-production rate of the resultant Ni(OH)2-Ti(IV)/TiO2 reached 7280.04 μmol h-1 g-1, which was significantly higher than that of TiO2, Ti(IV)/TiO2 and Ni(OH)2/TiO2 by a factor of 215, 63 and 1.8, respectively. Moreover, it was found that Ni(OH)2-Ti(IV)/TiO2 photocatalyst preserved a steady and highly efficient H2-production performance during repeated tests and also exhibited a high transient photocurrent density. The enhanced hydrogen-production performance of Ni(OH)2-Ti(IV)/TiO2 can be attributed to the synergistic effect of Ti(IV) hole cocatalyst and Ni(OH)2 electron cocatalyst to simultaneously accelerate the interfacial transfer of photogenerated holes and electrons. The present surface modification of dual cocatalysts can be regarded as one of the ideal strategies for the preparation of highly efficient hydrogen-production materials in view of their abundance, low cost and facile method.

A comparative study to check fracture strength of provisional fixed partial dentures made of autopolymerizing polymethylmethacrylate resin reinforced with different materials: An in vitro study.

PubMed

Gupt, Parikshit; Nagpal, Archana; Samra, Rupandeep Kaur; Verma, Ramit; Kaur, Jasjeet; Abrol, Surbhi

2017-01-01

The purpose of the study was to evaluate the fracture strength of provisional fixed partial dentures made of autopolymerizing polymethylmethacrylate (PMMA) resin using different types of reinforcement materials to determine the best among them. Fifty samples were made (10 samples for each group) with autopolymerizing PMMA resin using reinforcement materials (stainless steel wire: looped and unlooped and glass fiber: loose and unidirectional) as 3-unit posterior bridge. The test specimens were divided into five groups depending on the reinforcing material as Group I, II, III, IV, and V; Group I: PMMA unreinforced (control group), Group II: PMMA reinforced with stainless steel wire (straight ends), Group III: PMMA reinforced with stainless steel wire (looped ends), Group IV: PMMA reinforced with unidirectional glass fibers, and Group V: PMMA reinforced with randomly distributed glass fibers. Universal testing machine was used to evaluate and compare the fracture strength of samples. Comparison of mean ultimate force and ultimate stress was done employing one-way analysis of variance and Tukey's post hoc tests. The highest and lowest mean ultimate force and mean ultimate stress were of Group IV and I, respectively. Tukey's post hoc honestly significant difference multiple comparison for mean ultimate force and stress shows the increase in strength to be statistically significant ( P < 0.05) except for the samples reinforced with randomly distributed glass fibers ( P > 0.05). Unidirectional glass fibers showed the maximum strength, which was comparable to mean values of both stainless steel wire groups. Low cost and easy technique of using stainless steel wire make it the material of choice over the unidirectional glass fiber for reinforcement in nonesthetic areas where high strength is required.

Sound velocity and compressibility for lunar rocks 17 and 46 and for glass spheres from the lunar soil.

PubMed

Schreiber, E; Anderson, O L; Sogat, N; Warren, N; Scholz, C

1970-01-30

Four experiments on lunar materials are reported: (i) resonance on glass spheres from the soil; (ii) compressibility of rock 10017; (iii) sound velocities of rocks 10046 and 10017; (iv) sound velocity of the lunar fines. The data overlap and are mutually consistent. The glass beads and rock 10017 have mechanical properties which correspond to terrestrial materials. Results of (iv) are consistent with low seismic travel times in the lunar maria. Results of analysis of the microbreccia (10046) agreed with the soil during the first pressure cycle, but after overpressure the rock changed, and it then resembled rock 10017. Three models of the lunar surface were constructed giving density and velocity profiles.

The efficacy of combined intra-articular and intravenous tranexamic acid for blood loss in primary total knee arthroplasty: A meta-analysis.

PubMed

Wang, Zhao; Shen, Xiaofei

2017-10-01

This meta-analysis aimed to illustrate the efficacy and safety of combined topical and intravenous (IV) tranexamic acid (TXA) for blood loss control in primary total knee arthroplasty (TKA) patients. In April 2017, a systematic computer-based search was conducted in PubMed, EMBASE, Web of Science, Cochrane Database of Systematic Reviews, and Google database. Data on patients prepared for TKA surgery in studies that compared combined topical and IV TXA versus placebo, topical, or IV TXA alone were retrieved. The primary endpoint was the need for transfusion, total blood loss, hemoglobin drop, and the occurrence of deep venous thrombosis (DVT), pulmonary embolism (PE), and the infection. After testing for publication bias and heterogeneity between studies, data were aggregated for random-effects models when necessary. Seven clinical studies were ultimately included in the meta-analysis. Compared with IV TXA and control group, combined TXA was associated with less need for transfusion, blood loss, and hemoglobin drop (P < .05). There was no significant difference between the combined TXA and topical TXA in terms of the need for transfusion, total blood loss, and hemoglobin drop (P > .05). There was no significant difference between the complications (DVT, PE, and infection) between the combined TXA, IV TXA, topical TXA, and control group. Current meta-analysis suggests that the combined IV and topical TXA was superior than IV TXA or control group. There is still need for more studies to identify whether combined TXA was superior than topical TXA alone.

Comparative Evaluation of Tensile Strength in Die Stone Incorporated with Sodium and Calcium Hypochlorite as Disinfectants: An in vitro Study.

PubMed

Pramodh, N R; Kumar, C N Vijay; Pradeep, M R; Naik, Ravi; Mahesh, C S; Kumari, Manju R

2017-12-01

The aim of this study was to evaluate the tensile strength of die stone incorporated with sodium and calcium hypochlorite as disinfectants. Two commercially available type IV die stone (Kalrock: Kalabhai Karson Pvt., Ltd and Pearlstone: Asian Chemicals) and two commercially available disinfectant solutions (sodium hypochlorite and calcium hypochlorite: Beachem Laboratory Chemical Private Limited, Chennai and Leo Chem Private Limited, Bengaluru) were used in this study, and the tensile strength was measured using Lloyd's Universal Testing Machine. The results show that incorporating the disinfecting solutions decreases the tensile strength of both products. The effect of decreasing tensile strength on type IV gypsum product is seen more in calcium hypochlorite when compared with sodium hypochlorite disinfecting solution, and the tensile strength of Kalrock specimens is higher than Pearlstone specimens after disinfecting with sodium hypochlorite and calcium hypochlorite solution. The statistical results also show significant results in all the groups when compared with the control group. The incorporation of sodium and calcium hypochlorite disinfecting solutions is not an encouraging method for both die materials as it reduces the tensile strength of type IV gypsum product. Tensile strength of Kalstone® die material is superior than Pearlstone® die material after mixing with sodium hypochlorite and calcium hypochlorite. According to the recommendations of Americans with Disability Act (ADA) and the Centers for Disease Control and Prevention, disinfecting the whole cast without or minimal changes in physical and mechanical properties was the motto of the study. The tensile strength in type IV gypsum product plays a most important role in retrieval of cast from impression, especially in narrow tooth preparation. This study reveals that incorporating method of disinfecting solutions is not recommended as it reduces the tensile strength.

Quantum Social Science

NASA Astrophysics Data System (ADS)

Haven, Emmanuel; Khrennikov, Andrei

2013-01-01

Preface; Part I. Physics Concepts in Social Science? A Discussion: 1. Classical, statistical and quantum mechanics: all in one; 2. Econophysics: statistical physics and social science; 3. Quantum social science: a non-mathematical motivation; Part II. Mathematics and Physics Preliminaries: 4. Vector calculus and other mathematical preliminaries; 5. Basic elements of quantum mechanics; 6. Basic elements of Bohmian mechanics; Part III. Quantum Probabilistic Effects in Psychology: Basic Questions and Answers: 7. A brief overview; 8. Interference effects in psychology - an introduction; 9. A quantum-like model of decision making; Part IV. Other Quantum Probabilistic Effects in Economics, Finance and Brain Sciences: 10. Financial/economic theory in crisis; 11. Bohmian mechanics in finance and economics; 12. The Bohm-Vigier Model and path simulation; 13. Other applications to economic/financial theory; 14. The neurophysiological sources of quantum-like processing in the brain; Conclusion; Glossary; Index.

Computational Materials Science | Materials Science | NREL

Science.gov Websites

of water splitting and fuel cells Nanoparticles for thermal storage New Materials for High-Capacity Theoretical Methodologies for Studying Complex Materials Contact Stephan Lany Staff Scientist Dr. Lany is a

MSRR Rack Materials Science Research Rack

NASA Technical Reports Server (NTRS)

Reagan, Shawn

2017-01-01

The Materials Science Research Rack (MSRR) is a research facility developed under a cooperative research agreement between NASA and the European Space Agency (ESA) for materials science investigations on the International Space Station (ISS). The MSRR is managed at the Marshall Space Flight Center (MSFC) in Huntsville, AL. The MSRR facility subsystems were manufactured by Teledyne Brown Engineering (TBE) and integrated with the ESA/EADS-Astrium developed Materials Science Laboratory (MSL) at the MSFC Space Station Integration and Test Facility (SSITF) as part of the Systems Development Operations Support (SDOS) contract. MSRR was launched on STS-128 in August 2009, and is currently installed in the U. S. Destiny Laboratory Module on the ISS. Materials science is an integral part of developing new, safer, stronger, more durable materials for use throughout everyday life. The goal of studying materials processing in space is to develop a better understanding of the chemical and physical mechanisms involved, and how they differ in the microgravity environment of space. To that end, the MSRR accommodates advanced investigations in the microgravity environment of the ISS for basic materials science research in areas such as solidification of metals and alloys. MSRR allows for the study of a variety of materials including metals, ceramics, semiconductor crystals, and glasses. Materials science research benefits from the microgravity environment of space, where the researcher can better isolate chemical and thermal properties of materials from the effects of gravity. With this knowledge, reliable predictions can be made about the conditions required on Earth to achieve improved materials. MSRR is a highly automated facility with a modular design capable of supporting multiple types of investigations. Currently the NASA-provided Rack Support Subsystem provides services (power, thermal control, vacuum access, and command and data handling) to the ESA developed Materials Science Laboratory (MSL) which accommodates interchangeable Furnace Inserts (FI). Two ESA-developed FIs are presently available on the ISS: the Low Gradient Furnace (LGF) and the Solidification and Quenching Furnace (SQF). Sample-Cartridge Assemblies (SCAs), each containing one or more material samples, are installed in the FI by the crew and can be processed at temperatures up to 1400 C. Once an SCA is installed, the experiment can be run by automatic command or science conducted via telemetry commands from the ground. This facility is available to support materials science investigations through programs such as the US National Laboratory, Technology Development, NASA Research Announcements, and others. TBE and MSFC are currently developing NASA Sample Cartridge Assemblies (SCA's) with a planned availability for launch in 2017.

Comparative evaluation of the efficacy of fluoride varnish and casein phosphopeptide – Amorphous calcium phosphate in reducing Streptococcus mutans counts in dental plaque of children: An in vivo study

PubMed Central

Chandak, Shweta; Bhondey, Ashish; Bhardwaj, Amit; Pimpale, Jitesh; Chandwani, Manisha

2016-01-01

Aim: To assess the comparative efficacy of fluoride varnish and casein phosphopeptide–amorphous calcium phosphate (CPP–ACP) complex visa viz. Streptococcus mutans in plaque, and thereby the role that these two agents could play in the prevention of dental caries. Materials and Methods: A cluster sample of 120 caries inactive individuals belonging to moderate and high caries risk group were selected from 3–5-year-old age group based on the criteria given by Krassee and were randomized to four groups, namely, fluoride varnish – Group I, CPP–ACP complex – Group II, mixture of CPP–ACP complex –Gourp III, and fluoride and routine oral hygiene procedures as control – Group IV. The results thus obtained were analyzed using Statistical Package for the Social Sciences (SPSS) version 16. Results: A statistically significant difference in the pre and post-application scores of S. mutans (P < 0.01) count was observed in all the groups with CPP–ACP plus fluoride group being the most proficient. Conclusion: Materials such as fluoride varnish, CPP–ACP, and CPP–ACP plus fluoride protects the tooth structure, preserving the integrity of primary dentition, with the most encouraging results being with CPP–ACP plus fluoride. PMID:27891308

‘Symbiotic’ semiconductors: unusual and counter-intuitive Ge/Si/O interactions

NASA Astrophysics Data System (ADS)

George, T.; Li, P. W.; Chen, K. H.; Peng, K. P.; Lai, W. T.

2017-03-01

Since the inception of the first transistors in the 1940s, the immense body of work on the Group IV semiconductors, Si and Ge, has spearheaded spectacular advances in modern integrated-circuit (IC) technology that has enabled a vast landscape of device applications in logic, memory, and computing. Although initially Si supplanted Ge as the material of choice for metal-oxide-semiconductor field-effect transistors, Ge-based devices are now breaking new ground. Widespread and innovative Ge-based applications exist in optoelectronics, communications, microelectro-mechanical systems, and energy harvesting/savings. On the fundamental, materials science front, while it is well known that Ge and Si are fully miscible in each other, the nature and extent of their attraction for each other has largely been unexplored. In this paper, we report a rather curious interplay between Ge and Si that occurs at high temperature (~900 °C) and that can be best described as ‘symbiotic’. Each element appears to facilitate reactions in the other which would otherwise not be possible. Oxygen intersititials also appear to play a major role in these reactions. Our experimental work has allowed us to classify four distinct regimes where these reactions occur. We describe these conditions and provide the necessary theoretical explanations for these results.

Materials inspired by mathematics.

PubMed

Kotani, Motoko; Ikeda, Susumu

2016-01-01

Our world is transforming into an interacting system of the physical world and the digital world. What will be the materials science in the new era? With the rising expectations of the rapid development of computers, information science and mathematical science including statistics and probability theory, 'data-driven materials design' has become a common term. There is knowledge and experience gained in the physical world in the form of know-how and recipes for the creation of material. An important key is how we establish vocabulary and grammar to translate them into the language of the digital world. In this article, we outline how materials science develops when it encounters mathematics, showing some emerging directions.

Optics & Materials Science & Technology (OMST) Organization at LLNL

ScienceCinema

Suratwala,; Tayyab,; Nguyen, Hoang; Bude, Jeff; Dylla-Spears, Rebecca

2018-06-13

The Optics and Materials Science & Technology (OMST) organization at Lawrence Livermore National Laboratory (LLNL) supplies optics, recycles optics, and performs the materials science and technology to advance optics and optical materials for high-power and high-energy lasers for a variety of missions. The organization is a core capability at LLNL. We have a strong partnership with many optical fabricators, universities and national laboratories to accomplish our goals. The organization has a long history of performing fundamental optical materials science, developing them into useful technologies, and transferring them into production both on-site and off-site. We are successfully continuing this same strategy today.

Optics & Materials Science & Technology (OMST) Organization at LLNL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suratwala,; Tayyab,; Nguyen, Hoang

The Optics and Materials Science & Technology (OMST) organization at Lawrence Livermore National Laboratory (LLNL) supplies optics, recycles optics, and performs the materials science and technology to advance optics and optical materials for high-power and high-energy lasers for a variety of missions. The organization is a core capability at LLNL. We have a strong partnership with many optical fabricators, universities and national laboratories to accomplish our goals. The organization has a long history of performing fundamental optical materials science, developing them into useful technologies, and transferring them into production both on-site and off-site. We are successfully continuing this same strategymore » today.« less

Intermediates in the reaction of substrate-free cytochrome P450cam with peroxy acetic acid.

PubMed

Schünemann, V; Jung, C; Trautwein, A X; Mandon, D; Weiss, R

2000-08-18

Freeze-quenched intermediates of substrate-free cytochrome 57Fe-P450(cam) in reaction with peroxy acetic acid as oxidizing agent have been characterized by EPR and Mossbauer spectroscopy. After 8 ms of reaction time the reaction mixture consists of approximately 90% of ferric low-spin iron with g-factors and hyperfine parameters of the starting material; the remaining approximately 10% are identified as a free radical (S' = 1/2) by its EPR and as an iron(IV) (S= 1) species by its Mossbauer signature. After 5 min of reaction time the intermediates have disappeared and the Mossbauer and EPR-spectra exhibit 100% of the starting material. We note that the spin-Hamiltonian analysis of the spectra of the 8 ms reactant clearly reveals that the two paramagnetic species, e.g. the ferryl (iron(IV)) species and the radical, are not exchanged coupled. This led to the conclusion that under the conditions used, peroxy acetic acid oxidized a tyrosine residue (probably Tyr-96) into a tyrosine radical (Tyr*-96), and the iron(III) center of substrate-free P450(cam) to iron(IV).

Sandia National Laboratories: Research: Research Foundations: Geoscience

Science.gov Websites

Materials Science Nanodevices & Microsystems Radiation Effects & High Energy Density Science Engineering Science Geoscience Materials Science Nanodevices and Microsystems Radiation Effects and High variety of scales, including mechanical, thermal, and chemical effects Improve the understanding of

U.S. Materials Science on the International Space Station: Status and Plans

NASA Technical Reports Server (NTRS)

Chiaramonte, Francis P.; Kelton, Kenneth F.; Matson, Douglas M.; Poirier, David R.; Trivedi, Rohit K.; Su, Ching-Hua; Volz, Martin P.; Voorhees, Peter W.

2010-01-01

This viewgraph presentation reviews the current status and NASA plans for materials science on the International Space Station. The contents include: 1) Investigations Launched in 2009; 2) DECLIC in an EXPRESS rack; 3) Dynamical Selection of Three-Dimensional Interface Patterns in Directional Solidification (DSIP); 4) Materials Science Research Rack (MSRR); 5) Materials Science Laboratory; 6) Comparison of Structure and Segregation in Alloys Directionally Solidified in Terrestrial and Microgravity Environments (MICAST/CETSOL); 7) Coarsening in Solid Liquid Mixtures 2 Reflight (CSLM 2R); 8) Crystal Growth Investigations; 9) Levitator Investigations; 10) Quasi Crystalline Undercooled Alloys for Space Investigation (QUASI); 11) The Role of Convection and Growth Competition in Phase Selection in Microgravity (LODESTARS); 12) Planned Additional Investigations; 13) SETA; 14) METCOMP; and 15) Materials Science NRA.

Summary Report of Defense Science Study Group 3, 1992-1993. Volume 1

DTIC Science & Technology

1994-12-01

Briefings • Introduction to the DSSG program • DoD--especially DE.. , E , ARPA, R&D programs of the military services, etc. I The Intelligence Community ...1-2 D. Mentors and Advisors ................................................................ 1-2 E . Alumni...IV-159 iii E . Lateral Wave Modifications for Electromagnetic Propagation

Framing of Transitional Pedagogic Practices in the Sciences: Enabling Access

ERIC Educational Resources Information Center

Ellery, Karen

2017-01-01

Educational literature shows that students from working-class backgrounds are significantly less likely to persist to completion in higher education than middle-class students. This paper draws theoretically and analytically on Bernstein's ([1990. "Class, Codes and Control, Volume IV: The Structuring of Pedagogic Discourse." London:…

Overview 2010 of ARL Program on Network Science for Human Decision Making

DTIC Science & Technology

2011-01-01

pressure and subliminal seduction; but always through a sequence of decisions, either conscious or not. Network characteristics cannot be deduced from the...Time, Communication , and the Nervous System”, in Norbert Wiener: Collected Works, Volume IV, pp.220-252, The MIT Press, Cambridge, MA (1985). 16. P

Applying ABC Analysis to the Navy’s Inventory Management System

DTIC Science & Technology

2014-09-01

degree of MASTER OF SCIENCE IN OPERATIONS RESEARCH from the NAVAL POSTGRADUATE SCHOOL September 2014 Author: Benjamin May...Chair, Department of Operations Research iv THIS PAGE INTENTIONALLY LEFT BLANK v ABSTRACT ABC Analysis is an inventory categorization technique...FUTURE RESEARCH ..................................................................................75  LIST OF REFERENCES

General Science, Ninth Grade: Theme III and Theme IV. Experimental.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Div. of Curriculum and Instruction.

This document was designed to help teachers provide ninth grade students in New York City with opportunities to learn about scientific processes as well as basic reasoning skills which underlie problem-solving processes in scientific and nonscientific disciplines. The first section of the guide, "The Environment," contains lessons which…

36 CFR 73.9 - World Heritage criteria.

Code of Federal Regulations, 2013 CFR

2013-07-01

... human creative genius; or (ii) Exhibit an important interchange of human values, over a span of time or... the most important and significant natural habitats for in-situ conservation of biological diversity... science or conservation. (2) In addition to the criteria in paragraphs (c)(1)(i) through (c)(1)(iv) of...

36 CFR 73.9 - World Heritage criteria.

Code of Federal Regulations, 2011 CFR

2011-07-01

... human creative genius; or (ii) Exhibit an important interchange of human values, over a span of time or... the most important and significant natural habitats for in-situ conservation of biological diversity... science or conservation. (2) In addition to the criteria in paragraphs (c)(1)(i) through (c)(1)(iv) of...

Community College Users' Report, Fall 1975.

ERIC Educational Resources Information Center

Zimmer, A. L., Ed.

This report was compiled from information supplied by instructors participating in the National Science Foundation's community college field test of PLATO IV--a computer-based system developed at the University of Illinois--during the fall semester of 1975. Represented here are the responses of instructors at five Illinois community colleges to…

21 CFR 520.2345e - Tetracycline oral liquid.

Code of Federal Regulations, 2012 CFR

2012-04-01

...) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.2345e Tetracycline oral... animals which are raised for food production; Federal law restricts this drug to use by or on the order of a licensed veterinarian. (iv) National Academy of Sciences/National Research Council (NAS/NRC...

21 CFR 520.2345e - Tetracycline oral liquid.

Code of Federal Regulations, 2013 CFR

2013-04-01

...) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.2345e Tetracycline oral... animals which are raised for food production; Federal law restricts this drug to use by or on the order of a licensed veterinarian. (iv) National Academy of Sciences/National Research Council (NAS/NRC...

21 CFR 520.2345e - Tetracycline oral liquid.

Code of Federal Regulations, 2014 CFR

2014-04-01

...) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.2345e Tetracycline oral... animals which are raised for food production; Federal law restricts this drug to use by or on the order of a licensed veterinarian. (iv) National Academy of Sciences/National Research Council (NAS/NRC...

Materials science tetrahedron--a useful tool for pharmaceutical research and development.

PubMed

Sun, Changquan Calvin

2009-05-01

The concept of materials science tetrahedron (MST) concisely depicts the inter-dependent relationship among the structure, properties, performance, and processing of a drug. Similar to its role in traditional materials science, MST encompasses the development in the emerging field of pharmaceutical materials science and forms a scientific foundation to the design and development of new drug products. Examples are given to demonstrate the applicability of MST to both pharmaceutical research and product development. It is proposed that a systematic implementation of MST can expedite the transformation of pharmaceutical product development from an art to a science. By following the principle of MST, integration of research among different laboratories can be attained. The pharmaceutical science community as a whole can conduct more efficient, collaborative, and coherent research.

Spray Drying as a Reliable Route to Produce Metastable Carbamazepine Form IV.

PubMed

Halliwell, Rebecca A; Bhardwaj, Rajni M; Brown, Cameron J; Briggs, Naomi E B; Dunn, Jaclyn; Robertson, John; Nordon, Alison; Florence, Alastair J

2017-07-01

Carbamazepine (CBZ) is an active pharmaceutical ingredient used in the treatment of epilepsy that can form at least 5 polymorphic forms. Metastable form IV was originally discovered from crystallization with polymer additives; however, it has not been observed from subsequent solvent-only crystallization efforts. This work reports the reproducible formation of phase pure crystalline form IV by spray drying of methanolic CBZ solution. Characterization of the material was carried out using diffraction, scanning electron microscopy, and differential scanning calorimetry. In situ Raman spectroscopy was used to monitor the spray-dried product during the spray drying process. This work demonstrates that spray drying provides a robust method for the production of form IV CBZ, and the combination of high supersaturation and rapid solid isolation from solution overcomes the apparent limitation of more traditional solution crystallization approaches to produce metastable crystalline forms. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Considerations of Alloy 617 Application in the Gen IV Nuclear Reactor Systems - Part I: Mechanical Property Challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Weiju

2010-01-01

Alloy 617 is currently considered as a leading candidate material for high temperature components in the Gen IV Nuclear Reactor Systems. Because of the unprecedented severe working conditions beyond its commercial service experience required by the Gen IV systems, the alloy faces various challenges in both mechanical and metallurgical properties. This paper, as Part I of the discussion, is focused on the challenges and issues in the mechanical properties of Alloy 617 for the intended nuclear application. Considerations are given in details in its mechanical property data scatter, low creep strength in the desired high temperature range, lack of longtermmore » creep curves, high loading rate dependency, and preponderant tertiary creep. Some research and development activities are suggested with discussions on their viability to satisfy the Gen IV Nuclear Reactor System needs in near future and in the long run.« less

Reversible Shape Memory Polymers and Composites: Synthesis, Modeling and Design

DTIC Science & Technology

2013-03-01

Polymer; and (iii) Development of a Shape Memory Assisted Self - Healing Polymer. Page 3 of 19 Mather/FA9550-09-1-0195 IV(i) Modeling and Model...0195 IV(iii) Development of a Shape Memory Assisted Self - Healing Polymer Erika D. Rodriguez, X. Luo, and P.T. Mather, “Linear and Crosslinked...Poly (ε- Caprolactone) Polymers for Shape Memory Assisted Self - Healing (SMASH),” ACS Applied Materials and Interfaces 3 152-161 (2011). Self

Environmentally Safe and Effective Processes for Paint Removal

DTIC Science & Technology

1995-04-01

Urea Formaldehyde 3.5 1.5 Type III Melamine Formaldehyde 4.0 1.5 Type IV Phenol Formaldehyde 3.5 1.5...Polyester 3.0 34 - 42 1.04 - 1.46 Type II Urea Formaldehyde 3.5 54 - 62 1.47- 1.54 Type III Melamine Formaldehyde 4.0 64- 72 1.47- 1.52 Type IV Phenol... Melamine Formaldehyde electronics industry and to remove coatings from fibreglass and composite materials. Melamine formaldehyde resin is produced

Research and education on fiber-based materials for nanofluidics at Clemson University

NASA Astrophysics Data System (ADS)

Kornev, Konstantin G.

2007-11-01

Advanced materials and the science and engineering related to their design, process, test and manufacture represents one of the fast growing sectors of the Materials Science and Engineering field. Awareness of existing process, performance, manufacturing or recycle-ability issues and limitations, often dictates the next generation of advances needed to improve existing or create new materials. To compete in this growing science and technology area, trained experts must possess strong academic skills in their discipline as well as advanced communication, networking and cultural teamwork experience. Clemson's School of Materials Science and Engineering (MSE), is continuing to expand our program to focus on unique capabilities which support local, regional and national needs in advanced materials. Specifically, MSE at Clemson is evolving to highlight intrinsic strengths in research and education areas related to optical materials, advanced fibers and composites (based on inorganic, organic and natural fibers), biomaterials and devices, and architectural and restoration material science (including the conservation and preservation of maritime structures). Additionally, we continue to invest in our expertise in materials design and fabrication, which has historically supported our well known programs in ceramics and textiles. In addition to a brief review of the School's forward-looking challenges to remain competitive among strong southeast regional materials science programs, this presentation will also highlight recent technical advances in fiber-based materials for nanofluidic applications. Specifically we will present recent results on design of fiber-based nanofluidics for sensor applications and we will discuss some physical phenomena associated with liquid transport at nanoscale.

Electronic Principles IV, 7-8. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This fourth of 10 blocks of student and teacher materials for a secondary/postsecondary level course in electronic principles comprises one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in a civilian setting. Prerequisites are the previous blocks. This block on…

40 CFR 63.4291 - What are my options for meeting the emission limits?

Code of Federal Regulations, 2011 CFR

2011-07-01

... option. (b) Slashing. You must use the compliant material option to demonstrate that the mass fraction of... dyeing/finishing affected source. (1) Compliant material option. Demonstrate that the mass fraction of... paragraphs (4)(i) through (iv) of this paragraph. (i) The fraction of organic HAP applied in your dyeing...

40 CFR 63.4291 - What are my options for meeting the emission limits?

Code of Federal Regulations, 2014 CFR

2014-07-01

... option. (b) Slashing. You must use the compliant material option to demonstrate that the mass fraction of... dyeing/finishing affected source. (1) Compliant material option. Demonstrate that the mass fraction of... paragraphs (4)(i) through (iv) of this paragraph. (i) The fraction of organic HAP applied in your dyeing...

40 CFR 63.4710 - What notifications must I submit?

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Mass fraction of organic HAP for one coating, for one thinner, and for one cleaning material. (ii) Volume fraction of coating solids for one coating. (iii) Density for one coating, one thinner, and one... is required. (iv) The amount of waste materials and the mass of organic HAP contained in the waste...

40 CFR 63.4710 - What notifications must I submit?

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Mass fraction of organic HAP for one coating, for one thinner, and for one cleaning material. (ii) Volume fraction of coating solids for one coating. (iii) Density for one coating, one thinner, and one... is required. (iv) The amount of waste materials and the mass of organic HAP contained in the waste...

40 CFR 63.4291 - What are my options for meeting the emission limits?

Code of Federal Regulations, 2013 CFR

2013-07-01

... option. (b) Slashing. You must use the compliant material option to demonstrate that the mass fraction of... dyeing/finishing affected source. (1) Compliant material option. Demonstrate that the mass fraction of... paragraphs (4)(i) through (iv) of this paragraph. (i) The fraction of organic HAP applied in your dyeing...

40 CFR 63.4291 - What are my options for meeting the emission limits?

Code of Federal Regulations, 2012 CFR

2012-07-01

... option. (b) Slashing. You must use the compliant material option to demonstrate that the mass fraction of... dyeing/finishing affected source. (1) Compliant material option. Demonstrate that the mass fraction of... paragraphs (4)(i) through (iv) of this paragraph. (i) The fraction of organic HAP applied in your dyeing...

40 CFR 63.4710 - What notifications must I submit?

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Mass fraction of organic HAP for one coating, for one thinner, and for one cleaning material. (ii) Volume fraction of coating solids for one coating. (iii) Density for one coating, one thinner, and one... is required. (iv) The amount of waste materials and the mass of organic HAP contained in the waste...

78 FR 45291 - Interpretive Guidance and Policy Statement Regarding Compliance With Certain Swap Regulations

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-26

... Section 2(i) A. Comments B. Statutory Analysis C. Principles of International Comity IV. Guidance A... Reporting ii. Swap Data Recordkeeping Relating to Complaints and Marketing and Sales Materials iii. Physical... Reporting 2. Swap Data Recordkeeping Relating to Complaints and Marketing and Sales Materials 3. Physical...

49 CFR 172.301 - General marking requirements for non-bulk packagings.

Code of Federal Regulations, 2010 CFR

2010-10-01

... container load, and the entire contents of the rail car, truck or freight container are shipped from one... or freight container containing only a single hazardous material in non-bulk packages must be marked... hazardous material is loaded at one loading facility; (iv) The transport vehicle or freight container...

10 CFR 30.15 - Certain items containing byproduct material.

Code of Federal Regulations, 2011 CFR

2011-01-01

... form of a foil and designed to protect life and property from fires. (8) Electron tubes: Provided, That... any other electron tube; (ii) 1 microcurie of cobalt-60; (iii) 5 microcuries of nickel-63; (iv) 30... provided further, That the levels of radiation from each electron tube containing byproduct material do not...

10 CFR 30.15 - Certain items containing byproduct material.

Code of Federal Regulations, 2012 CFR

2012-01-01

... form of a foil and designed to protect life and property from fires. (8) Electron tubes: Provided, That... any other electron tube; (ii) 1 microcurie of cobalt-60; (iii) 5 microcuries of nickel-63; (iv) 30... provided further, That the levels of radiation from each electron tube containing byproduct material do not...

7 CFR 1717.854 - Advance approval-100 percent private financing of distribution, subtransmission and headquarters...

Code of Federal Regulations, 2010 CFR

2010-01-01

... material findings and recommendations made in the most recent Loan Fund and Accounting Review; (iv... compliance, and management letter; (v) Resolved all outstanding material accounting issues with RUS; and (vi... restructuring agreement, or any other agreement with RUS. (d) Right of normal review reserved. RUS reserves the...

10 CFR 32.74 - Manufacture and distribution of sources or devices containing byproduct material for medical use.

Code of Federal Regulations, 2013 CFR

2013-01-01

... accidents; (iv) For devices containing byproduct material, the radiation profile of a prototype device; (v... source or device pertinent to an evaluation of its radiation safety, including: (i) The byproduct...) Instructions for handling and storing the source or device from the radiation safety standpoint; these...

10 CFR 32.74 - Manufacture and distribution of sources or devices containing byproduct material for medical use.

Code of Federal Regulations, 2014 CFR

2014-01-01

... accidents; (iv) For devices containing byproduct material, the radiation profile of a prototype device; (v... source or device pertinent to an evaluation of its radiation safety, including: (i) The byproduct...) Instructions for handling and storing the source or device from the radiation safety standpoint; these...

Si-Ge-Sn alloys with 1.0 eV gap for CPV multijunction solar cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roucka, Radek, E-mail: radek@translucentinc.com; Clark, Andrew; Landini, Barbara

2015-09-28

Si-Ge-Sn ternary group IV alloys offer an alternative to currently used 1.0 eV gap materials utilized in multijunction solar cells. The advantage of Si-Ge-Sn is the ability to vary both the bandgap and lattice parameter independently. We present current development in fabrication of Si-Ge-Sn alloys with gaps in the 1.0 eV range. Produced material exhibits excellent structural properties, which allow for integration with existing III-V photovoltaic cell concepts. Time dependent room temperature photoluminescence data demonstrate that these materials have long carrier lifetimes. Absorption tunable by compositional changes is observed. As a prototype device set utilizing the 1 eV Si-Ge-Sn junction,more » single junction Si-Ge-Sn device and triple junction device with Si-Ge-Sn subcell have been fabricated. The resulting I-V and external quantum efficiency data show that the Si-Ge-Sn junction is fully functional and the performance is comparable to other 1.0 eV gap materials currently used.« less

Current voltage perspective of an organic electronic device

NASA Astrophysics Data System (ADS)

Mukherjee, Ayash K.; Kumari, Nikita

2018-05-01

Nonlinearity in current (I) - voltage (V) measurement is a well-known attribute of two-terminal organic device, irrespective of the geometrical or structural arrangement of the device. Most of the existing theories that are developed for interpretation of I-V data, either focus current-voltage relationship of charge injection mechanism across the electrode-organic material interface or charge transport mechanism through the organic active material. On the contrary, both the mechanisms work in tandem charge conduction through the device. The transport mechanism is further complicated by incoherent scattering from scattering centres/charge traps that are located at the electrode-organic material interface and in the bulk of organic material. In the present communication, a collective expression has been formulated that comprises of all the transport mechanisms that are occurring at various locations of a planar organic device. The model has been fitted to experimental I-V data of Au/P3HT/Au device with excellent degree of agreement. Certain physical parameters such as the effective area of cross-section and resistance due to charge traps have been extracted from the fit.

Development of Contextual Mathematics teaching Material integrated related sciences and realistic for students grade xi senior high school

NASA Astrophysics Data System (ADS)

Helma, H.; Mirna, M.; Edizon, E.

2018-04-01

Mathematics is often applied in physics, chemistry, economics, engineering, and others. Besides that, mathematics is also used in everyday life. Learning mathematics in school should be associated with other sciences and everyday life. In this way, the learning of mathematics is more realstic, interesting, and meaningful. Needs analysis shows that required contextual mathematics teaching materials integrated related sciences and realistic on learning mathematics. The purpose of research is to produce a valid and practical contextual mathematics teaching material integrated related sciences and realistic. This research is development research. The result of this research is a valid and practical contextual mathematics teaching material integrated related sciences and realistic produced

Materials Knowledge Systems in Python - A Data Science Framework for Accelerated Development of Hierarchical Materials.

PubMed

Brough, David B; Wheeler, Daniel; Kalidindi, Surya R

2017-03-01

There is a critical need for customized analytics that take into account the stochastic nature of the internal structure of materials at multiple length scales in order to extract relevant and transferable knowledge. Data driven Process-Structure-Property (PSP) linkages provide systemic, modular and hierarchical framework for community driven curation of materials knowledge, and its transference to design and manufacturing experts. The Materials Knowledge Systems in Python project (PyMKS) is the first open source materials data science framework that can be used to create high value PSP linkages for hierarchical materials that can be leveraged by experts in materials science and engineering, manufacturing, machine learning and data science communities. This paper describes the main functions available from this repository, along with illustrations of how these can be accessed, utilized, and potentially further refined by the broader community of researchers.

Materials Science Research Rack Onboard the International Space Station

NASA Technical Reports Server (NTRS)

Reagan, Shawn E.; Lehman, John R.; Frazier, Natalie C.

2014-01-01

The Materials Science Research Rack (MSRR) is a highly automated facility developed in a joint venture/partnership between NASA and ESA center dot Allows for the study of a variety of materials including metals, ceramics, semiconductor crystals, and glasses onboard the International Space Station (ISS) center dot Multi-user facility for high temperature materials science research center dot Launched on STS-128 in August 2009, and is currently installed in the U.S. Destiny Laboratory Module ?Research goals center dot Provide means of studying materials processing in space to develop a better understanding of the chemical and physical mechanisms involved center dot Benefit materials science research via the microgravity environment of space where the researcher can better isolate the effects of gravity during solidification on the properties of materials center dot Use the knowledge gained from experiments to make reliable predictions about conditions required on Earth to achieve improved materials

Materials Knowledge Systems in Python - A Data Science Framework for Accelerated Development of Hierarchical Materials

PubMed Central

Brough, David B; Wheeler, Daniel; Kalidindi, Surya R.

2017-01-01

There is a critical need for customized analytics that take into account the stochastic nature of the internal structure of materials at multiple length scales in order to extract relevant and transferable knowledge. Data driven Process-Structure-Property (PSP) linkages provide systemic, modular and hierarchical framework for community driven curation of materials knowledge, and its transference to design and manufacturing experts. The Materials Knowledge Systems in Python project (PyMKS) is the first open source materials data science framework that can be used to create high value PSP linkages for hierarchical materials that can be leveraged by experts in materials science and engineering, manufacturing, machine learning and data science communities. This paper describes the main functions available from this repository, along with illustrations of how these can be accessed, utilized, and potentially further refined by the broader community of researchers. PMID:28690971

The Effect of Alloy Composition and Processing on the Structure and Properties of I/M Al-Li-X Alloys

DTIC Science & Technology

1990-07-01

ORGANIZATION Department ot Materials Scienci (N aplicable) University of Virginia U. S. Army Research Office 6c. ADDRESS (City, State, and ZIP Code) 7b...27709 Attention: Dr. Andrew Crowson, Program Officer Materials Science Division Submitted by: E. A. Starke Earnest Oglesby Professor of Materials ...Science and Dean G. J. Shiflet Professor of Materials Science Report No. UVA/525140/MS91/101 July 1990 DTIC ELECTFE SAUG3 1190 I DEPARTMENT OF MATERIALS

Science and Emerging Technology of 2D Atomic Layered Materials and Devices

DTIC Science & Technology

2017-09-09

AFRL-AFOSR-JP-TR-2017-0067 Science & Emerging Technology of 2D Atomic Layered Materials and Devices Angel Rubio UNIVERSIDAD DEL PAIS VASCO - EUSKAL...Emerging Technology of 2D Atomic Layered Materials and Devices 5a.  CONTRACT NUMBER 5b.  GRANT NUMBER FA2386-15-1-0006 5c.  PROGRAM ELEMENT NUMBER...reporting documents for AOARD project 144088, “2D Materials and Devices Beyond Graphene Science & Emerging Technology of 2D Atomic Layered Materials and

The NASA Materials Science Research Program - It's New Strategic Goals and Plans

NASA Technical Reports Server (NTRS)

Schlagheck, Ronald A.

2003-01-01

In 2001, the NASA created a separate science enterprise, the Office of Biological and Physical Research (OBPR), to perform strategical and fundamental research bringing together physics, chemistry, biology, and engineering to solve problems needed for future agency mission goals. The Materials Science Program is one of basic research disciplines within this new Enterprise's Division of Physical Sciences Research. The Materials Science Program participates to utilize effective use of International Space Station (ISS) experimental facilities, target new scientific and technology questions, and transfer results for Earth benefits. The program has recently pursued new investigative research in areas necessary to expand NASA knowledge base for exploration of the universe, some of which will need access to the microgravity of space. The program has a wide variety of traditional ground and flight based research related types of basic science related to materials crystallization, fundamental processing, and properties characterization in order to obtain basic understanding of various phenomena effects and relationships to the structures, processing, and properties of materials. A summary of the types and sources for this research is presented and those experiments planned for the space. Areas to help expand the science basis for NASA future missions are described. An overview of the program is given including the scope of the current and future NASA Research Announcements with emphasis on new materials science initiatives. A description of the planned flight experiments to be conducted on the International Space Station program along with the planned facility class Materials Science Research Rack (MSRR) and Microgravity Glovebox (MSG) type investigations.

Elementary Students' Learning of Materials Science Practices Through Instruction Based on Engineering Design Tasks

NASA Astrophysics Data System (ADS)

Wendell, Kristen Bethke; Lee, Hee-Sun

2010-12-01

Materials science, which entails the practices of selecting, testing, and characterizing materials, is an important discipline within the study of matter. This paper examines how third grade students' materials science performance changes over the course of instruction based on an engineering design challenge. We conducted a case study of nine students who participated in engineering design-based science instruction with the goal of constructing a stable, quiet, thermally comfortable model house. The learning outcome of materials science practices was assessed by clinical interviews conducted before and after the instruction, and the learning process was assessed by students' workbooks completed during the instruction. The interviews included two materials selection tasks for designing a sturdy stepstool and an insulated pet habitat. Results indicate that: (1) students significantly improved on both materials selection tasks, (2) their gains were significantly positively associated with the degree of completion of their workbooks, and (3) students who were highly engaged with the workbook's reflective record-keeping tasks showed the greatest improvement on the interviews. These findings suggest the important role workbooks can play in facilitating elementary students' learning of science through authentic activity such as engineering design.

Development of Probabilistic Rigid Pavement Design Methodologies for Military Airfields.

DTIC Science & Technology

1983-12-01

4A161102AT22, Task AO, Work Unit 009, "Methodology for Considering Material Variability in Pavement Design." OCE Project Monitor was Mr. S. S. Gillespie. The...PREFACE. .. ............................. VOLUME 1: STATE OF THE ART VARIABILITY OF AIRFIELD PAVEMENT MATERIALS VOLUME 11: MATHEMATICAL FORMULATION OF...VOLUME IV: PROBABILISTIC ANALYSIS OF RIGID AIRFIELD DESIGN BY ELASTIC LAYERED THEORY VOLUME I STATE OF THE ART VARIABILITY OF AIRFIELD PAVEMENT MATERIALS

Layer by Layer Growth of 2D Quantum Superlattices (NBIT III)

DTIC Science & Technology

2017-02-28

building quantum superlatticies using 2D materials as the building blocks. Specifically, we develop methods that allow i) large-scale growth of aligned...superlattice and heterostructures, iii) lateral and clean patterning of 2D materials for atomically-thin circuitry and iv) novel physical properties...high precision and flexibility beyond conventional methods. Moreover, it provides the solutions for current major barrier for 2D materials (e.g

U.S. Biodefense & Homeland Security: Toward Detection & Attribution

DTIC Science & Technology

2006-12-01

Agency (EPA) and FBI hazardous material teams worked side-by-side, searching 280 barrels containing 635 bags of quarantined mail that had been...hazardous material teams searched 280 barrels containing 635 bags of quarantined mail that had been seized as evidence. The final letter was addressed to...Chapter IV. He provided important research material and fresh ideas based on his expertise as Scientist-in-Residence of the Center for

Materials Research for Superconducting Machinery-IV

DTIC Science & Technology

1975-09-01

Mechanical properties of fabricated metal joints, including welding ( GTAW , EB, GMAW), brazing, and soldering from 4-300 K. Propertle» Include tensile...nickel alloys; a precipita- tion-hardening copper alloy; invar; nickel- chromium -iron alloys; stainless steels; and the composite materials boron...temperature; the first 4 K fatigue llT^t tou£me88 "udies on a nitrogen-strengthened chromium -nickel-manganese steel, which show this material has higher

Composition-spread Growth and the Robust Topological Surface State of Kondo Insulator SmB6 Thin Films

DTIC Science & Technology

2014-01-01

1,2 1 Center for Nanophysics & Advanced Materials , University of Maryland, College Park, Maryland 20742, USA 2 Department of physics, University of...Maryland, College Park, Maryland 20742, USA 3 Department of Mechanical Engineering and Materials Science, Duke University, Durham, NC 27708 4...Department of Materials Science and Engineering, University of Michigan, Ann Arbor, Michigan 48109, USA 5 Department of Materials Science & Engineering

77 FR 55863 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-11

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In accordance with the Federal Advisory Committee Act (Pub. L. 92- 463 as amended), the National Science Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and Engineering Center (MRSEC) at Princeton...

78 FR 30342 - Proposal Review Panel for Materials Research; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-22

... NATIONAL SCIENCE FOUNDATION Proposal Review Panel for Materials Research; Notice of Meeting In accordance with the Federal Advisory Committee Act (Pub. L. 92- 463 as amended), the National Science Foundation announces the following meeting: Name: Site visit review of the Materials Research Science and Engineering Center (MRSEC) at Duke Universit...

Materials Science and the Problem of Garbage

ERIC Educational Resources Information Center

McPherson, Heather

2016-01-01

Materials science--the science of stuff--has made our lives better by making it possible for manufacturers to supply us with products. Students have misconceptions about materials use. Many may think using bottled water, for example, is harmless because they recycle the plastic empties, but they fail to consider the resources and energy used to…

English Skills for Life Sciences: Problem Solving in Biology. Tutor Version [and] Student Version.

ERIC Educational Resources Information Center

California Univ., Los Angeles. Center for Language Education and Research.

This manual is part of a series of materials designed to reinforce essential concepts in physical science through interactive, language-sensitive, problem-solving exercises emphasizing cooperative learning. The materials are intended for limited-English-proficient (LEP) students in beginning physical science classes. The materials are for teams of…

Teachers' Use of Educative Curriculum Materials to Engage Students in Science Practices

ERIC Educational Resources Information Center

Arias, Anna Maria; Davis, Elizabeth A.; Marino, John-Carlos; Kademian, Sylvie M.; Palincsar, Annemarie Sullivan

2016-01-01

New reform documents underscore the importance of integrating science practices into the learning of science. This integration requires sophisticated teaching that does not often happen. Educative curriculum materials--materials explicitly designed to support teacher and student learning--have been posited as a way to support teachers to achieve…

New Directions in NASA's Materials Science Program

NASA Technical Reports Server (NTRS)

Gillies, Donald C.; Whitaker, Ann F. (Technical Monitor)

2001-01-01

Recently, NASA's Microgravity Research Division was re-aligned to match the Agency's increasing awareness of the importance of biological and nano-structural sciences. The Division has become the Physical Sciences Research section within the newly created Office of Biological and Physical Research. Within materials science and in the last few years, new programs aimed at biomaterials have been initiated. Results from these programs and also new research pertaining to materials for radiation protection will be discussed.

Learning Activities That Combine Science Magic Activities with the 5E Instructional Model to Influence Secondary-School Students' Attitudes to Science

ERIC Educational Resources Information Center

Lin, Jang-Long; Cheng, Meng-Fei; Chang, Ying-Chi; Li, Hsiao-Wen; Chang, Jih-Yuan; Lin, Deng-Min

2014-01-01

The purpose of this study was to investigate how learning materials based on Science Magic activities affect student attitudes to science. A quasi-experimental design was conducted to explore the combination of Science Magic with the 5E Instructional Model to develop learning materials for teaching a science unit about friction. The participants…

Models and Materials: Bridging Art and Science in the Secondary Curriculum

NASA Astrophysics Data System (ADS)

Pak, D.; Cavazos, L.

2006-12-01

Creating and sustaining student engagement in science is one challenge facing secondary teachers. The visual arts provide an alternative means of communicating scientific concepts to students who may not respond to traditional formats or identify themselves as interested in science. We have initiated a three-year teacher professional development program at U C Santa Barbara focused on bridging art and science in secondary curricula, to engage students underrepresented in science majors, including girls, English language learners and non-traditional learners. The three-year format provides the teams of teachers with the time and resources necessary to create innovative learning experiences for students that will enhance their understanding of both art and science content. Models and Materials brings together ten secondary art and science teachers from six Santa Barbara County schools. Of the five participating science teachers, three teach Earth Science and two teach Life Science. Art and science teachers from each school are teamed and challenged with the task of creating integrated curriculum projects that bring visual art concepts to the science classroom and science concepts to the art classroom. Models and Materials were selected as unifying themes; understanding the concept of models, their development and limitations, is a prominent goal in the California State Science and Art Standards. Similarly, the relationship between composition, structure and properties of materials is important to both art and science learning. The program began with a 2-week institute designed to highlight the natural links between art and science through presentations and activities by both artists and scientists, to inspire teachers to develop new ways to present models in their classrooms, and for the teacher teams to brainstorm ideas for curriculum projects. During the current school year, teachers will begin to integrate science and art and the themes of modeling and materials into their classrooms. Initial results indicate that the participating teachers developed a clearer understanding of the uses and limitations of models the classroom, better understanding of materials science, and strong initial ideas for integrated curricula.

Genetic algorithm prediction of two-dimensional group-IV dioxides for dielectrics

NASA Astrophysics Data System (ADS)

Singh, Arunima K.; Revard, Benjamin C.; Ramanathan, Rohit; Ashton, Michael; Tavazza, Francesca; Hennig, Richard G.

2017-04-01

Two-dimensional (2D) materials present a new class of materials whose structures and properties can differ from their bulk counterparts. We perform a genetic algorithm structure search using density-functional theory to identify low-energy structures of 2D group-IV dioxides A O2 (A =Si , Ge, Sn, Pb). We find that 2D SiO2 is most stable in the experimentally determined bi-tetrahedral structure, while 2D SnO2 and PbO2 are most stable in the 1 T structure. For 2D GeO2, the genetic algorithm finds a new low-energy 2D structure with monoclinic symmetry. Each system exhibits 2D structures with formation energies ranging from 26 to 151 meV/atom, below those of certain already synthesized 2D materials. The phonon spectra confirm their dynamic stability. Using the HSE06 hybrid functional, we determine that the 2D dioxides are insulators or semiconductors, with a direct band gap of 7.2 eV at Γ for 2D SiO2, and indirect band gaps of 4.8-2.7 eV for the other dioxides. To guide future applications of these 2D materials in nanoelectronic devices, we determine their band-edge alignment with graphene, phosphorene, and single-layer BN and MoS2. An assessment of the dielectric properties and electrochemical stability of the 2D group-IV dioxides shows that 2D GeO2 and SnO2 are particularly promising candidates for gate oxides and 2D SnO2 also as a protective layer in heterostructure nanoelectronic devices.

Quasi-appropriation of dialectical materialism: a critical reading of Marxism in Vygotskian approaches to cultural studies in science education

NASA Astrophysics Data System (ADS)

Rodrigues, André; Camillo, Juliano; Mattos, Cristiano

2014-09-01

In this review essay we examine five categories of dialectical materialism proposed by Paulo Lima Junior, Fernanda Ostermann, and Flavia Rezende in their study of the extent to which the articles published in Cultural Studies of Science Education, that use a Vygotskian approach, are committed to Marxism/dialectical materialism. By closely examining these categories ("thesis, antithesis and synthesis," "unity of analysis," "History," "revolution," "materialism") we expect to enrich the general discussion about the possible contributions of Marxism to science education. We perceive part of science education practice as orientating toward positivism, which reduces human beings—teachers, learners and researchers—to isolated individuals who construct knowledge by themselves. The very same approach aggravates the inner contradiction of the capitalist society demanding commitments from researchers to continually build innovative science education from human praxis. Nevertheless, it is necessary to situate ourselves beyond a formal commitment with dialectical materialism and hence reach the heart of this method. Besides understanding the researchers' commitments, we question the extent to which the respective research helps to radically refresh the current view on science, science education practice, and research in science education.

Village Science: A Resource Handbook for Rural Alaskan Teachers.

ERIC Educational Resources Information Center

Dick, Alan

A resource handbook for rural Alaskan teachers covers village science, to make basic science concepts relevant to the physical environment in villages. Material is intended for use as filler for weeks that come up short on science materials, to provide stimulation for students who cannot see the relevance of science in their lives, and to help…

First Materials Processing Test in the Science Operation Area (SOA) During STS-47 Spacelab-J Mission

NASA Technical Reports Server (NTRS)

1992-01-01

The science laboratory, Spacelab-J (SL-J), flown aboard the STS-47 flight was a joint venture between NASA and the National Space Development Agency of Japan (NASDA) utilizing a manned Spacelab module. The mission conducted 24 materials science and 20 life science experiments, of which 35 were sponsored by NASDA, 7 by NASA, and two collaborative efforts. Materials science investigations covered such fields as biotechnology, electronic materials, fluid dynamics and transport phenomena, glasses and ceramics, metals and alloys, and acceleration measurements. Life sciences included experiments on human health, cell separation and biology, developmental biology, animal and human physiology and behavior, space radiation, and biological rhythms. Test subjects included the crew, Japanese koi fish (carp), cultured animal and plant cells, chicken embryos, fruit flies, fungi and plant seeds, and frogs and frog eggs. Featured together in the Science Operation Area (SOA) are payload specialists' first Materials Processing Test during NASA/NASDA joint ground activities at the Huntsville Operations Support Center (HOSC) Spacelab Payload Operations Control Center (SL POCC) at Marshall Space Fight Center (MSFC).

First Materials Processing Test in the Science Operation Area (SOA) During STS-47 Spacelab-J Mission

NASA Technical Reports Server (NTRS)

1992-01-01

The science laboratory, Spacelab-J (SL-J), flown aboard the STS-47 flight was a joint venture between NASA and the National Space Development Agency of Japan (NASDA) utilizing a manned Spacelab module. The mission conducted 24 materials science and 20 life science experiments, of which 35 were sponsored by NASDA, 7 by NASA, and two collaborative efforts. Materials science investigations covered such fields as biotechnology, electronic materials, fluid dynamics and transport phenomena, glasses and ceramics, metals and alloys, and acceleration measurements. Life sciences included experiments on human health, cell separation and biology, developmental biology, animal and human physiology and behavior, space radiation, and biological rhythms. Test subjects included the crew, Japanese koi fish (carp), cultured animal and plant cells, chicken embryos, fruit flies, fungi and plant seeds, and frogs and frog eggs. Featured together in the Science Operation Area (SOA) are payload specialists' first Materials Processing Test during NASA/NASDA joint ground activities at the Huntsville Operations Support Center (HOSC) Spacelab Payload Operations Control Center (SL POCC) at Marshall Space Flight Center (MSFC).

Materials inspired by mathematics

PubMed Central

Kotani, Motoko; Ikeda, Susumu

2016-01-01

Abstract Our world is transforming into an interacting system of the physical world and the digital world. What will be the materials science in the new era? With the rising expectations of the rapid development of computers, information science and mathematical science including statistics and probability theory, ‘data-driven materials design’ has become a common term. There is knowledge and experience gained in the physical world in the form of know-how and recipes for the creation of material. An important key is how we establish vocabulary and grammar to translate them into the language of the digital world. In this article, we outline how materials science develops when it encounters mathematics, showing some emerging directions. PMID:27877877