USE OF CONTINUOUS NEPHELOMETER TO MEASURE PERSONAL EXPOSURE TO PARTICULATE MATTER DURING THE 1998 U.S. EPA BALTIMORE PANEL STUDY

EPA Science Inventory

Personal exposures to particulate matter (PM) have typically been measured using filter samplers worn by the participants in exposure studies. Personal filter samplers, however, are limited to providing average mass concentrations integrated over a 12- to 24-hour period due to ...

A bacterial bioreporter panel to assay the cytotoxicity of atmospheric particulate matter

NASA Astrophysics Data System (ADS)

Kessler, Nivi; Schauer, James J.; Yagur-Kroll, Sharon; Melamed, Sahar; Tirosh, Ofir; Belkin, Shimshon; Erel, Yigal

2012-12-01

Numerous studies have demonstrated that elevated concentrations of suspended atmospheric particulate matter (PM) are associated with adverse health effects. In order to minimize the adverse public health effects of atmospheric PM by exposure management, there is a need for a greater understanding of the toxic mechanisms and the components that are responsible for the toxic effects. The aim of this study was to utilize bioassay techniques to investigate these aspects. For this purpose a reporter panel of 9 genetically engineered bacterial (Escherichia coli) strains was composed. Each panel member was designed to report on a different stress condition with a measurable light signal produced by the luciferase enzyme. Toxic mechanisms and components were studied using six anthropogenic PM source samples, including two vehicle combustion particles, three coal fly ash (CFA) samples and an urban dust sample. The most prominent outcome of the panel exposure results were broad panel responses observed for two of the CFA samples, indicating oxidative stress, respiration inhibition and iron deficiency. These responses were relieved when the samples were treated with EDTA, a non-specific metal chelator, suggesting the involvement of metals in the observed effects. Bioavailability analysis of the samples suggests that chromium was related to the toxic responses induced by two of the CFA samples. Oxidative stress was also observed in several samples of ambient atmospheric aerosols and excess metal toxicity in an urban dust sample collected in a parking lot. The reporter panel approach, as demonstrated in this study, has the potential of providing novel insights as to the mechanisms of atmospheric PM toxicity. Furthermore, combining the panel's results with bioavailability data can enlighten about the role of different PM components in the observed toxicity.

RELATIONSHIP BETWEEN HVAC SYSTEM OPERATION, AIR EXCHANGE RATE, AND INDOOR-OUTDOOR PARTICULATE MATTER RATIOS

EPA Science Inventory

Measurements of duty cycle , the fraction of time the heating and cooling (HVAC) system was operating, were made in each participant's home during the spring season of the RTP Particulate Matter Panel Study. A miniature temperature sensor/data logger combination placed on the ...

Effects of Exposure Measurement on Particle Matter Epidemiology: A Simulation Using Data from a Panel Study in Baltimore MD

EPA Science Inventory

Ascertaining the true risk associated with exposure to particulate matter (PM) is difficult, given the fact that pollutant components are frequently correlated with each other and with other gaseous pollutants; relationships between ambient concentrations and personal exposures a...

Characteristics of a wind-actuated aerodynamic braking device for high-speed trains

NASA Astrophysics Data System (ADS)

Takami, H.; Maekawa, H.

2017-04-01

To shorten the stopping distance of the high speed trains in case of emergency, we developed a small-sized aerodynamic braking unit without use of the friction between a rail and a wheel. The developed device could actuate a pair of two drag panels with a travelling wind. However, after the drag panel fully opened, vibrational movements of the drag panel characterized by its slight flutter were repeated. In this study, to stabilize the opened panel, matters pertaining to the angle of attack with respect to the drag panel and pertaining to the arrangement of the two panels were examined by a wind tunnel experiment using a scale model. As a result, to stabilize the opened panel and to keep the good performance of the braking device, it is found out that an angle of attack of 75 to 80 degrees is suitable provided that the interval of the two panels is narrow enough.

AMBIENT PARTICULATE MATTER EXPOSURES: A COMPARISON OF SHEDS-PM EXPOSURE MODEL PREDICTIONS AND ESTIMATES DERIVED FROM MEASUREMENTS COLLECTED DURING NERL'S RTP PM PANEL STUDY

EPA Science Inventory

The US EPA National Exposure Research Laboratory (NERL) is currently refining and evaluating a population exposure model for particulate matter (PM), called the Stochastic Human Exposure and Dose Simulation (SHEDS-PM) model. The SHEDS-PM model estimates the population distribu...

75 FR 32763 - Science Advisory Board Staff Office; Notification of a Public Meeting of the Clean Air Scientific...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-09

...The Environmental Protection Agency (EPA) Science Advisory Board (SAB) Staff Office announces a public meeting on July 26-27, 2010 of the Clean Air Scientific Advisory Particulate Matter Review Panel (Panel) to review EPA's forthcoming Policy Assessment for the Review of Particulate Matter National Ambient Air Quality Standards-- Second External Review Draft (June 2010).

76 FR 11434 - Arbitration Panel Decision Under the Randolph-Sheppard Act

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-02

... not have the right to appeal a decision to award a contract to another vendor. However, the hearing... DEPARTMENT OF EDUCATION Arbitration Panel Decision Under the Randolph-Sheppard Act AGENCY..., on September 28, 2010, an arbitration panel rendered a decision in the matter of Calvette Brown v...

EXPOSURE ANALYSIS FROM PERSONAL AND AMBIENT AIR SAMPLING: RESULTS OF THE 1998 BALTIMORE STUDY

EPA Science Inventory

An integrated epidemiological-exposure panel study was conducted during July-August 1998 which focused upon establishing relationships between potential human exposures to particulate matter (PM) and related co-pollutants with detectable health effects. The study design incorpo...

Some reflections on the role of the Scientific Advisory Panel to the Marshall Islands nationwide radiological study.

PubMed

McEwan, A C; Simon, S L; Baverstock, K F; Trott, K R; Sankaranarayanan, K; Paretzke, H G

1997-07-01

As a consequence of the U.S. Atomic Weapons Testing Program in the Trust Territory of the Pacific, now the Republic of the Marshall Islands, numerous scientists have advised the Marshallese on matters of radiation and radioactive contamination. Some of the previous advice has appeared to vary or conflict resulting in consequent uncertainty for the people. In a new initiative in 1989, the RMI Government engaged a five member multi-disciplinary Scientific Advisory Panel to oversee the assessment of, and to advise on, the radiological status of the entire nation. The formation of the Panel was accompanied by the establishment of a Resident Scientist position, and ultimately a small scientific team and laboratory on Majuro. The nationwide radiological study was conducted using ground survey methods over the period 1990-1994. Tasks undertaken by the Panel included formulating reasonable objectives for the study and attempting to establish effective communication and understanding of issues with political leaders and RMI Government agencies and people, as well as advising on and monitoring the scientific integrity of the study itself. The attempt was also made to initiate investigations to address matters of concern that emerged. The problem was faced of providing not only technical guidance on radioactivity and radiation measurements, but also explaining the significance of measured values and concepts, such as risk and probability of health effects to a diverse but nontechnical audience, generally across cultural and language barriers. The experience of the Panel in providing advice and guidance to the Republic of the Marshall Islands, while unique in many ways, parallels the difficulties experienced elsewhere in communicating information about risks from radiation exposure.

The Effect of Economic Growth, Urbanization, and Industrialization on Fine Particulate Matter (PM2.5) Concentrations in China.

PubMed

Li, Guangdong; Fang, Chuanglin; Wang, Shaojian; Sun, Siao

2016-11-01

Rapid economic growth, industrialization, and urbanization in China have led to extremely severe air pollution that causes increasing negative effects on human health, visibility, and climate change. However, the influence mechanisms of these anthropogenic factors on fine particulate matter (PM 2.5 ) concentrations are poorly understood. In this study, we combined panel data and econometric methods to investigate the main anthropogenic factors that contribute to increasing PM 2.5 concentrations in China at the prefecture level from 1999 to 2011. The results showed that PM 2.5 concentrations and three anthropogenic factors were cointegrated. The panel Fully Modified Least Squares and panel Granger causality test results indicated that economic growth, industrialization, and urbanization increased PM 2.5 concentrations in the long run. The results implied that if China persists in its current development pattern, economic growth, industrialization and urbanization will inevitably lead to increased PM 2.5 emissions in the long term. Industrialization was the principal factor that affected PM 2.5 concentrations for the total panel, the industry-oriented panel and the service-oriented panel. PM 2.5 concentrations can be reduced at the cost of short-term economic growth and industrialization. However, reducing the urbanization level is not an efficient way to decrease PM 2.5 pollutions in the short term. The findings also suggest that a rapid reduction of PM 2.5 concentrations relying solely on adjusting these anthropogenic factors is difficult in a short-term for the heavily PM 2.5 -polluted panel. Moreover, the Chinese government will have to seek much broader policies that favor a decoupling of these coupling relationships.

Modeling Air Pollution Exposure Metrics for the Diabetes and Environment Panel Study (DEPS)

EPA Science Inventory

Air pollution health studies of fine particulate matter (PM) often use outdoor concentrations as exposure surrogates. To improve exposure assessments, we developed and evaluated an exposure model for individuals (EMI), which predicts five tiers of individual-level exposure metric...

Panel Discussion

NASA Astrophysics Data System (ADS)

Langer, James

1997-03-01

Panelists: Arthur Bienenstock, Stanford University Cherry Ann Murray, Lucent Technologies Venkatesh Narayanamurti, University of California-Santa Barbara Paul Peercy, SEMI-SEMATECH Robert Richardson, Cornell University James Roberto, Oak Ridge National Laboratory The Board on Physics and Astronomy is undertaking a series of reassessments of all branches of physics as the foundation of a new physics survey. As part of this project, a Committee on Condensed Matter and Materials Physics has been established under the leadership of Venkatesh Narayanamurti of the University of California-Santa Barbara. The committee has been working since June on a study that will include an illustrative recounting of major recent achievements; identification of new opportunities and challenges facing the field; and articulation-for leaders in government, industry, universities, and the public at large-of the important roles played by the field in modern society. An especially urgent issue is how to maintain the intellectual vitality of condensed matter and materials physics, and its contributions to the well-being of the United States, in an era of limited resources. The forum will feature a panel of materials researchers who are members of the Committee on Condensed Matter and Materials Physics. They will give a brief report on the status of the study and engage in a dialogue with the audience about issues facing the condensed matter and materials physics community. Broad community input is vital to the success of the study. Please come and make your voice heard!

INFLUENCE OF RESIDENTIAL HVAC DUTY CYCLE ON INDOOR AIR QUALITY

EPA Science Inventory

Measurements of duty cycle, the fraction of time the heating and cooling (HVAC) system was operating, were made in homes during the spring season of the RTP Particulate Matter Panel Study and the Tampa Asthmatic Children's Study. A temperature sensor/logger placed on an outlet...

75 FR 59697 - Hydrographic Services Review Panel Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-28

... Health, Columbia River and Northwest Regional navigation and hydrographic surveying, climate change and... Review Panel Meeting AGENCY: National Ocean Service, National Oceanic and Atmospheric Administration... for Oceans and Atmosphere on matters related to the responsibilities and authorities set forth in...

Modeling individual exposures to ambient PM2.5 in the diabetes and the environment panel study (DEPS)

EPA Science Inventory

Air pollution epidemiology studies of ambient fine particulate matter (PM2.5) often use outdoor concentrations as exposure surrogates, which can induce exposure error. The goal of this study was to improve ambient PM2.5 exposure assessments for a repeated measurements study with ...

OUTDOOR VS. HUMAN EXPOSURE: NERL PM EXPOSURE PANEL STUDIES

EPA Science Inventory

An association has been demonstrated between ambient particulate matter (PM 2.5 and PM 10) concentrations and human morbidity/mortality. However, little is known regarding the most important sources of PM exposure, interpersonal and intrapersonal variability in exposure, and the...

REAL-TIME PERSONAL NEPHELOMETER AND TIME ACTIVITY DATA FROM THE NERL RTP PM PANEL STUDY

EPA Science Inventory

A longitudinal particulate matter (PM) exposure study was conducted in the Research Triangle Park, NC, area between June 2000 and June 2001. Participants were selected from two groups of potentially susceptible sub-populations: a group of African-Americans living in an environm...

PM2.5 EXPOSURE CHANGES HEART RATE VARIABILITY (HRV) AND BLOOD PARAMETERS IN STATE HIGHWAY PATROL TROOPERS

EPA Science Inventory

Epidemiological studies show an association between ambient particulate matter PM and cardiovascular mortality. Panel and controlled exposure studies report PM-associated changes in HRV and blood factors involved in clotting and inflammation. We investigated the effects of in-veh...

POWER ANALYSIS OF LINEAR RELATIONSHIPS BETWEEN PERSONAL EXPOSURE AND INDOOR/OUTDOOR PM 2.5 CONCENTRATIONS AT BALTIMORE AND FRESNO

EPA Science Inventory

The National Exposure Research Laboratory is currently in the process of conducting panel studies to investigate personal exposure to particulate matter(PM). One of the primary goals of PM exposure studies is to establish mathematical relationships between personal exposure and...

THE ROLE OF SUBPOPULATION, DISEASE STATE, HOUSING, SEASON AND OTHER FACTORS UPON PERSONAL EXPOSURES TO PM OF AMBIENT ORIGIN

EPA Science Inventory

A series of longitudinal particulate matter (PM) and related co-pollutant human exposure panel field studies have recently been completed. Studies were conducted in Baltimore, Maryland (1997,1998) Fresno, California (1999) and Research Triangle Park, North Carolina (2002-2001)...

5 CFR 1201.174 - Enforcing the Special Panel decision.

Code of Federal Regulations, 2014 CFR

2014-01-01

.... 1201.174 Section 1201.174 Administrative Personnel MERIT SYSTEMS PROTECTION BOARD ORGANIZATION AND... Special Panel, will order the agency concerned to take any action appropriate to carry out the decision of... matter. These regulations are set out in subpart F of this part. ...

5 CFR 1201.174 - Enforcing the Special Panel decision.

Code of Federal Regulations, 2012 CFR

2012-01-01

.... 1201.174 Section 1201.174 Administrative Personnel MERIT SYSTEMS PROTECTION BOARD ORGANIZATION AND... Special Panel, will order the agency concerned to take any action appropriate to carry out the decision of... matter. These regulations are set out in subpart F of this part. ...

5 CFR 1201.174 - Enforcing the Special Panel decision.

Code of Federal Regulations, 2011 CFR

2011-01-01

.... 1201.174 Section 1201.174 Administrative Personnel MERIT SYSTEMS PROTECTION BOARD ORGANIZATION AND... Special Panel, will order the agency concerned to take any action appropriate to carry out the decision of... matter. These regulations are set out in subpart F of this part. ...

5 CFR 1201.174 - Enforcing the Special Panel decision.

Code of Federal Regulations, 2010 CFR

2010-01-01

.... 1201.174 Section 1201.174 Administrative Personnel MERIT SYSTEMS PROTECTION BOARD ORGANIZATION AND... Special Panel, will order the agency concerned to take any action appropriate to carry out the decision of... matter. These regulations are set out in subpart F of this part. ...

BAYESIAN HIERARCHICAL MODELING OF PERSONAL EXPOSURE TO PARTICULATE MATTER

EPA Science Inventory

In the US EPA's 1998 Baltimore Epidemiology-Exposure Panel Study, a group of 21 residents of a single building retirement community wore personal monitors recording personal fine particulate air pollution concentrations (PM_2.5) for 27 days, while other monitors recorde...

PM CONCENTRATIONS ASSOCIATED WITH PERSONAL ACTIVITIES BASED ON REAL-TIME PERSONAL NEPHELOMETRY DATA FROM THE NERL RTP PM PANEL STUDY

EPA Science Inventory

A longitudinal particulate matter (PM) exposure study sponsored by EPA's National Exposure Research Laboratory (NERL) was conducted in the Research Triangle Park, NC area between June 2000 and June 2001. Participants were selected from two groups of potentially susceptible sub-...

USE OF A CONTINUOUS NEPHELOMETER TO MEASURE PERSONAL EXPOSURE TO PARTICLES DURING THE U.S. EPA BALTIMORE AND FRESNO PANEL STUDIES

EPA Science Inventory

In population exposure studies, personal exposure to particulate matter (PM) is typically measured as a 12- to 24-hour integrated mass concentration. To better understand short-term variation in personal PM exposure, continuous (one-minute averaging time) nephelometers were wo...

16 CFR 1500.121 - Labeling requirements; prominence, placement, and conspicuousness.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., layout, or color with other printed matter on the label. This regulation contains the Commission's..., which bear(s) the labeling designed to be most prominently displayed, shown, presented, or examined... designed to be displayed for sale or, on display panels other than the principal display panel, in lines...

16 CFR § 1500.121 - Labeling requirements; prominence, placement, and conspicuousness.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., layout, or color with other printed matter on the label. This regulation contains the Commission's..., which bear(s) the labeling designed to be most prominently displayed, shown, presented, or examined... designed to be displayed for sale or, on display panels other than the principal display panel, in lines...

16 CFR 1500.121 - Labeling requirements; prominence, placement, and conspicuousness.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., layout, or color with other printed matter on the label. This regulation contains the Commission's..., which bear(s) the labeling designed to be most prominently displayed, shown, presented, or examined... designed to be displayed for sale or, on display panels other than the principal display panel, in lines...

16 CFR 1500.121 - Labeling requirements; prominence, placement, and conspicuousness.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., layout, or color with other printed matter on the label. This regulation contains the Commission's..., which bear(s) the labeling designed to be most prominently displayed, shown, presented, or examined... designed to be displayed for sale or, on display panels other than the principal display panel, in lines...

16 CFR 1500.121 - Labeling requirements; prominence, placement, and conspicuousness.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., layout, or color with other printed matter on the label. This regulation contains the Commission's..., which bear(s) the labeling designed to be most prominently displayed, shown, presented, or examined... designed to be displayed for sale or, on display panels other than the principal display panel, in lines...

21 CFR 860.125 - Consultation with panels.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Consultation with panels. 860.125 Section 860.125 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... importance and complexity of the subject matter involved and the time available for action. When time and...

21 CFR 860.125 - Consultation with panels.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Consultation with panels. 860.125 Section 860.125 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... importance and complexity of the subject matter involved and the time available for action. When time and...

Report of the Panel on Pre-Professional Training in the Agricultural Sciences.

ERIC Educational Resources Information Center

Commission on Undergraduate Education in the Biological Sciences, Washington, DC.

Summaries of the recommendations made by action committees established by the Panel on Pre-Professional Training in the Agricultural Sciences are made under the headings "Biological Subject Matter,""Mathematics," and "Physics." The action committees in Animal Sciences, Bioengineering, Food Sciences, Natural Resources, Plant and Soil Sciences, and…

IDENTIFICATION OF EMERGING SUB-POPULATIONS SUSCEPTIBLE TO ADVERSE HEALTH EFFECTS ASSOCIATED WITH AIR PARTICULATE EXPOSURE

EPA Science Inventory

The overall weight of evidence from panel, clinical, and toxicological studies has demonstrated the ability of ambient air particulate matter (PM) exposure to induce a variety of extra-pulmonary effects ranging from alterations in hematological parameters to cardiac function. Alt...

Exploring the Educational Needs of the Homeland Security Community

ERIC Educational Resources Information Center

France, Paul

2012-01-01

This study involved an evaluation of the subjective perspectives held by a panel of 16 homeland security subject matter experts to determine what the needs of the homeland security professional community are for educational programs. The researcher examined the knowledge, skills, and abilities deemed important in homeland security to determine…

Paneling "Matters" in Elementary Students' Graphic Narratives

ERIC Educational Resources Information Center

Pantaleo, Sylvia

2013-01-01

During a 10-week classroom-based study, 20 fourth grade students participated in a number of interdependent activities that focused on developing their visual meaning-making skills and competencies. As well as reading, responding in writing to and discussing a selection of picturebooks, graphic novels, and magazines, the students created graphic…

Educational Achievement of Immigrant Adolescents in Spain: Do Gender and Region of Origin Matter?

ERIC Educational Resources Information Center

Vaquera, Elizabeth; Kao, Grace

2012-01-01

This study explores the educational achievement of immigrant youth in Spain employing data from 3 waves of the Longitudinal Study of Families and Childhood (Panel de Families i Infancia), a representative sample of children in Catalonia first interviewed at ages 13-16 in 2006 (N = 2,710). Results suggest consistent disadvantage in achievement…

Selection of Journals for Index Medicus: A Historical Review

PubMed Central

Karel, Leonard

1967-01-01

From the inception of the first Index Medicus, published in 1879, to the present, the National Library of Medicine has been concerned with the quality of journals in the Index. The Library has, therefore, sought advice repeatedly on how best to maintain currency of the Index without sacrificing quality and subject matter balance. Responding to suggestions, the Library decided in June 1964 to base its selection of journals on recommendations made by a panel consisting primarily of extramural consultants widely regarded as specialists in the totality of biomedical literature. Beginning with its first meeting in September 1964, this panel has been fortified in its reviews by advice from subject matter specialists. The panel, by its own wishes, which bear the endorsement of the Board of Regents of the Library, will continue to rely heavily on such expert advice in future evaluations of journals. PMID:6072093

Children's Work and Schooling: Does Gender Matter? Evidence from the Peru LSMS Panel Data. Working Paper.

ERIC Educational Resources Information Center

Ilahi, Nadeem

Using panel data from Peru, this paper investigates the determinants of the allocation of boys' and girls' time to schooling, housework, and income-generating activities. Specifically, it explores whether sickness, employment of adult women, infrastructure, and female headship have different impacts on the time use of boys and girls. Girls mostly…

When Do Faculty Inputs Matter? A Panel Study of Racial/Ethnic Differences in Engineering Bachelor's Degree Production

ERIC Educational Resources Information Center

Ransom, Tafaya

2013-01-01

Science, technology, engineering and mathematics (STEM) fields are widely credited as the primary drivers of economic growth through innovation, with engineering universally identified as especially critical. Yet as other nations have strengthened their engineering talent pools, the United States has struggled to cultivate an engineering workforce…

77 FR 21556 - Don Pedro Hydroelectric Project: Turlock Irrigation District; Modesto Irrigation District...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-10

... studies. All local, state, and federal agencies, Indian tribes, and other interested parties are invited... written submissions as necessary to understand the matters in dispute. The Panel will limit all input that... Rate of Change; Request 7-- Evaluation of the Upper Tuolumne Habitats for Anadromous Fish; Request 8...

Developmental Patterns in Marital Satisfaction: Another Look at Covenant Marriage

ERIC Educational Resources Information Center

DeMaris, Alfred; Sanchez, Laura A.; Krivickas, Kristi

2012-01-01

This study investigated differences in the trajectory of marital satisfaction in the first 7 years between couples in covenant versus standard marriages. The authors analyzed data on 707 Louisiana marriages from the Marriage Matters Panel Survey of Newlywed Couples, 1998-2004, using multivariate longitudinal growth modeling. When the sample was…

Galactic Neighborhood and Laboratory Astrophysics

NASA Astrophysics Data System (ADS)

Wang, Q. D.

2011-05-01

The galactic neighborhood, extending from the Milky Way to redshifts of about 0.1, is our unique local laboratory for detailed study of galaxies and their interplay with the environment. Such study provides a foundation of knowledge for interpreting observations of more distant galaxies and their environment. The Astro 2010 Science Frontier Galactic Neighborhood Panel identified four key sci- entific questions: 1) What are the flows of matter and energy in the circumgalac- tic medium? 2) What controls the mass-energy-chemical cycles within galaxies? 3) What is the fossil record of galaxy assembly from first stars to present? 4) What are the connections between dark and luminous matter? These questions, essential to the understanding of galaxies as interconnected complexes, can be addressed most effectively and/or uniquely in the galactic neighborhood. The panel also highlighted the discovery potential of time-domain astronomy and astrometry with powerful new techniques and facilities to greatly advance our understanding of the precise connections among stars, galaxies, and newly dis- covered transient events. The relevant needs for laboratory astrophysics will be emphasized, especially in the context of supporting NASA missions.

Life Goals Matter to Happiness: A Revision of Set-Point Theory

ERIC Educational Resources Information Center

Headey, Bruce

2008-01-01

Using data from the long-running German Socio-Economic Panel Survey (SOEP), this paper provides evidence that life goals matter substantially to subjective well-being (SWB). Non-zero sum goals, which include commitment to family, friends and social and political involvement, promote life satisfaction. Zero sum goals, including commitment to career…

Jackpot? Gender Differences in the Effects of Lottery Wins on Separation

ERIC Educational Resources Information Center

Boertien, Diederik

2012-01-01

In this study, information on small to modest lottery wins from the British Household Panel Survey (N = 2,563) was used to investigate the effect of income on separation. The analysis demonstrated that money matters within relationships. Lottery wins temporarily reduced the odds of separation after men won. Men spent more on leisure and became…

SOURCE APPORTIONMENT OF INDOOR, OUTDOOR, AND PERSONAL PM2.5 IN SEATTLE, WASHINGTON, USING POSITIVE MATRIX FACTORIZATION

EPA Science Inventory

As part of a large exposure assessment and health effects panel study, 33 trace elements and light-absorbing carbon were measured on 24-hr particulate matter with an aero-dynamic diameter <2.5 um (PM2.5) fixed-site filter samples collected between September 26, 2000, and May 25, ...

Assessing the need for a new nationally representative household panel survey in the United States

PubMed Central

Moffitt, Robert; Schoeni, Robert F.; Brown, Charles; Chase-Lansdale, P. Lindsay; Couper, Mick P.; Diez-Roux, Ana V.; Hurst, Erik; Seltzer, Judith A.

2015-01-01

We introduce this special issue on the critical matter of whether the existing household panel surveys in the U.S. are adequate to address the important emerging social science and policy questions of the next few decades. We summarize the conference papers which address this issue in different domains. The papers detail many new and important emerging research questions but also identify key limitations in existing panels in addressing those questions. To address these limitations, we consider the advantages and disadvantages of initiating a new, general-purpose omnibus household panel in the U.S. We also discuss the particular benefits of starting new panels that have specific targeted domains such as child development, population health and health care. We also develop a list of valuable enhancements to existing panels which could address many of their limitations. PMID:26688609

78 FR 68102 - Atomic Safety and Licensing Board; In the Matter of Nuclear Innovation North America LLC (South...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-13

...] Atomic Safety and Licensing Board; In the Matter of Nuclear Innovation North America LLC (South Texas... Administrative Judges: Michael M. Gibson, Chairman, Dr. Gary S. Arnold, Dr. Randall J. Charbeneau. The Atomic... follows: Mail: Administrative Judge Michael M. Gibson, Atomic Safety and Licensing Board Panel, Mail Stop...

76 FR 44623 - Atomic Safety and Licensing Board; In the Matter of Nuclear Innovation North America LLC (South...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-26

...] Atomic Safety and Licensing Board; In the Matter of Nuclear Innovation North America LLC (South Texas..., Dr. Gary S. Arnold, Dr. Randall J. Charbeneau. The Atomic Safety and Licensing Board hereby gives... as follows: Mail: Administrative Judge Michael M. Gibson, Atomic Safety and Licensing Board Panel...

76 FR 69774 - Self-Regulatory Organizations; NYSE Amex LLC; Notice of Filing of Rule Change Proposing a One...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-09

... matters concerning its previously assigned RLP securities. RLP Requirements Under proposed NYSE Amex... determinations by the RLP Panel would constitute final action by the Exchange on the matter at issue. Retail...) (noting that dark pools and internalizing broker- dealers executed approximately 25.4% of share volume in...

76 FR 69788 - Self-Regulatory Organizations; New York Stock Exchange LLC; Notice of Filing of Rule Change...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-09

... would not be held responsible for any matters concerning its previously assigned RLP securities. RLP... determinations by the RLP Panel would constitute final action by the Exchange on the matter at issue. Retail..., 2010), 75 FR 3594 (January 21, 2010) (noting that dark pools and internalizing broker- dealers executed...

75 FR 2573 - Self-Regulatory Organizations; Notice of Filing and Immediate Effectiveness of Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-15

... matters concerning its previously assigned SLP securities upon termination of this 30-day period. Quoting... liquidity (e.g., reserve and dark orders), the 5% average quoting requirement can only be satisfied when an... determinations by the SLP Panel will constitute final action by the Exchange on the disputed matter. Regulatory...

Open scientific communication urged

NASA Astrophysics Data System (ADS)

Richman, Barbara T.

In a report released last week the National Academy of Sciences' Panel on Scientific Communication and National Security concluded that the ‘limited and uncertain benefits’ of controls on the dissemination of scientific and technological research are ‘outweighed by the importance of scientific progress, which open communication accelerates, to the overall welfare of the nation.’ The 18-member panel, chaired by Dale R. Corson, president emeritus of Cornell University, was created last spring (Eos, April 20, 1982, p. 241) to examine the delicate balance between open dissemination of scientific and technical information and the U.S. government's desire to protect scientific and technological achievements from being translated into military advantages for our political adversaries.The panel dealt almost exclusively with the relationship between the United States and the Soviet Union but noted that there are ‘clear problems in scientific communication and national security involving Third World countries.’ Further study of this matter is necessary.

Who Experiences Growth in News Media Literacy and Why Does It Matter? Examining Education, Individual Differences, and Democratic Outcomes

ERIC Educational Resources Information Center

Tully, Melissa; Vraga, Emily K.

2018-01-01

Developing news media literacy skills is recognized as an important part of becoming an informed citizen, but not enough research examines how growth in media literacy differs by individual characteristics. Using a panel study of undergraduate students, we examine which predispositions predict growth in news media literacy beliefs over the…

The flux of organic matter through a peatland ecosystem: The role of cellulose, lignin, and their control of the ecosystem oxidation state

NASA Astrophysics Data System (ADS)

Worrall, Fred; Moody, Catherine S.; Clay, Gareth D.; Burt, Tim P.; Rose, Rob

2017-07-01

This study used thermogravimetric analysis (TGA) to study the transit of organic C through a peatland ecosystem. The biomass, litter, peat soil profile, particulate organic matter (POM), and dissolved organic matter (DOM) fluxes were sampled from the Moor House National Nature Reserve, a peat-covered catchment in northern England where both the dry matter and carbon budget for the catchment were known. The study showed that although TGA traces showed distinct differences between organic matter reservoirs and fluxes, the traces could not readily be associated with particular functionalities or elemental properties. The TGA trace shows that polysaccharides are preferentially removed by humification and degradation with residual peat being dominated by lignin compositions. The DOM is derived from the degradation of lignin while the POM is derived from erosion of the peat profile. The carbon lost as gases (CO2 and CH4) was estimated to be composed of 92 to 95% polysaccharide carbon. The composition of the organic matter lost from the peat ecosystem means that the oxidative ratio (OR) of the ecosystem experienced by the atmosphere was between 0.96 and 0.99: currently, the Intergovernmental Panel on Climate Change uses an OR value of 1.1 for all ecosystems.

General dependencies and causality analysis of road traffic fatalities in OECD countries.

PubMed

Yaseen, Muhammad Rizwan; Ali, Qamar; Khan, Muhammad Tariq Iqbal

2018-05-07

The road traffic accidents were responsible for material and human loss which was equal to 2.8 to 5% of gross national product (GNP). However, literature does not explore the elasticity coefficients and nexus of road traffic fatalities with foreign direct investment, health expenditures, trade openness, mobile subscriptions, the number of researchers in R&D department, and environmental particulate matter. This study filled this research gap by exploring the nexus between road traffic fatalities, foreign direct investment, health expenditures, trade openness, mobile subscriptions, the number of researchers, and environmental particulate matter in Organization for Economic Cooperation and Development (OECD) countries by using panel data from 1995 to 2015. The panel Autoregressive Distributed Lag (ARDL) bound test was used for the detection of cointegration between the variables after checking the stationarity in selected variables with different panel unit root tests. Panel vector error correction model explored the causality of road traffic fatalities, foreign direct investment, PM2.5 in the environment, and trade openness in the long run. Road traffic fatalities showed short run bi-directional causality with foreign direct investment and health expenditures. The short run bi-directional causality was also observed between trade and foreign direct investment and cellular mobile subscriptions and foreign direct investment. The panel fully modified ordinary least square (FMOLS) and panel dynamic ordinary least square (DOLS) showed the 0.947% reduction in road fatalities for 1% increase in the health expenditures in OECD countries. The significant reduction in road fatalities was also observed due to 1% increase in trade openness and researchers in R&D, which implies the importance of trade and research for road safety. It is required to invest in the health sector for the safety of precious human lives like the hospitals with latest medical equipment and improvement in the emergency services in the country. The research and development activities should be enhanced especially for the health and transportation sectors. The trade of environment-friendly technology should be promoted for the protection of environment.

Content validation using an expert panel: assessment process for assistive technology adopted by farmers with disabilities.

PubMed

Mathew, S N; Field, W E; French, B F

2011-07-01

This article reports the use of an expert panel to perform content validation of an experimental assessment process for the safety of assistive technology (AT) adopted by farmers with disabilities. The validation process was conducted by a panel of six experts experienced in the subject matter, i.e., design, use, and assessment of AT for farmers with disabilities. The exercise included an evaluation session and two focus group sessions. The evaluation session consisted of using the assessment process under consideration by the panel to evaluate a set of nine ATs fabricated by a farmer on his farm site. The expert panel also participated in the focus group sessions conducted immediately before and after the evaluation session. The resulting data were analyzed using discursive analysis, and the results were incorporated into the final assessment process. The method and the results are presented with recommendations for the use of expert panels in research projects and validation of assessment tools.

Pantex Falling Man - Independent Review Panel Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bertolini, Louis; Brannon, Nathan; Olson, Jared

2014-11-01

Consolidated Nuclear Security (CNS) Pantex took the initiative to organize a Review Panel of subject matter experts to independently assess the adequacy of the Pantex Tripping Man Analysis methodology. The purpose of this report is to capture the details of the assessment including the scope, approach, results, and detailed Appendices. Along with the assessment of the analysis methodology, the panel evaluated the adequacy with which the methodology was applied as well as congruence with Department of Energy (DOE) standards 3009 and 3016. The approach included the review of relevant documentation, interactive discussion with Pantex staff, and the iterative process ofmore » evaluating critical lines of inquiry.« less

5 CFR 2635.604 - Disqualification while seeking employment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... in fact accomplish his disqualification by simply avoiding any involvement in matters affecting the... is employed by the National Science Foundation as a special Government employee to serve on a panel...

5 CFR 2635.604 - Disqualification while seeking employment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... in fact accomplish his disqualification by simply avoiding any involvement in matters affecting the... is employed by the National Science Foundation as a special Government employee to serve on a panel...

77 FR 64796 - Availability of Seats for the Monterey Bay National Marine Sanctuary Advisory Council

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-23

... the Conservation Representative, and the Business and Tourism Activity Panel (``BTAP'') co-chaired by the Business/Industry Representative and Tourism Representative, each dealing with matters concerning...

78 FR 4390 - Availability of Seats for the Monterey Bay National Marine Sanctuary Advisory Council

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-22

...'') chaired by the Conservation Representative, and the Business and Tourism Activity Panel (``BTAP'') co-chaired by the Business/Industry Representative and Tourism Representative, each dealing with matters...

78 FR 20093 - Extension of Application Period for Seats for the Monterey Bay National Marine Sanctuary Advisory...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-03

... Business and Tourism Activity Panel (``BTAP'') co-chaired by the Business/Industry Representative and Tourism Representative, each dealing with matters concerning research, education, conservation and human...

78 FR 14271 - Availability of Seats for the Monterey Bay National Marine Sanctuary Advisory Council

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-05

... Representative, and the Business and Tourism Activity Panel (``BTAP'') co-chaired by the Business/Industry Representative and Tourism Representative, each dealing with matters concerning research, education, conservation...

West Africa

Atmospheric Science Data Center

2013-04-16

... (MISR) illustrate the abundance of atmospheric particulate matter across the region. The left-hand panels are natural-color views from ... across the region is noticeable. The distinctive area of dark green vegetation (apparent below and left of image center) are situated in ...

KSC-2010-4506

NASA Image and Video Library

2010-08-27

CAPE CANAVERAL, Fla. -- In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, a technician releases the bolts on a panel that protected the Alpha Magnetic Spectrometer, or AMS, during shipment. The Air Force C-5M flight crew that delivered AMS to Kennedy's Shuttle Landing Facility left their signatures and good wishes for the success of the mission on the panel. AMS, a state-of-the-art particle physics detector, is designed to operate as an external module on the International Space Station. It will use the unique environment of space to study the universe and its origin by searching for dark matter. The STS-134 crew will fly AMS to the International Space Station aboard space shuttle Endeavour, targeted to launch Feb. 26, 2011. Photo credit: NASA/Frankie Martin

78 FR 23909 - Hydrographic Services Review Panel Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-23

... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration Hydrographic Services... (NOAA), Department of Commerce. ACTION: Notice of open meeting (via webinar and teleconference). SUMMARY... the Under Secretary of Commerce for Oceans and Atmosphere on matters related to the responsibilities...

Differential pulmonary and cardiac effects of pulmonary exposure to a panel of PM-associated metals

EPA Science Inventory

Biological mechanisms underlying the epidemiological association between exposure to particulate matter (PM) and increased risk of cardiovascular health effects are under investigation. Water soluble metals reaching systemic circulation following pulmonary exposure are likely exe...

77 FR 40384 - Advisory Panel for Integrative Activities; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-09

... because the Committee is reviewing proposal actions that will include privileged intellectual property and... public, these matters that are exempt under 5 U.S.C. 552b(c)(4) and (6) of the Government in the Sunshine...

5 CFR 9701.508 - Homeland Security Labor Relations Board.

Code of Federal Regulations, 2011 CFR

2011-01-01

... members, a three-person panel of the HSLRB) may decide a particular dispute involving a matter of first impression or a major policy. (2) In cases where the full HSLRB acts, a vote of the majority of the HSLRB (or...

5 CFR 9701.508 - Homeland Security Labor Relations Board.

Code of Federal Regulations, 2012 CFR

2012-01-01

... members, a three-person panel of the HSLRB) may decide a particular dispute involving a matter of first impression or a major policy. (2) In cases where the full HSLRB acts, a vote of the majority of the HSLRB (or...

5 CFR 9701.508 - Homeland Security Labor Relations Board.

Code of Federal Regulations, 2013 CFR

2013-01-01

... members, a three-person panel of the HSLRB) may decide a particular dispute involving a matter of first impression or a major policy. (2) In cases where the full HSLRB acts, a vote of the majority of the HSLRB (or...

5 CFR 9701.508 - Homeland Security Labor Relations Board.

Code of Federal Regulations, 2014 CFR

2014-01-01

... members, a three-person panel of the HSLRB) may decide a particular dispute involving a matter of first impression or a major policy. (2) In cases where the full HSLRB acts, a vote of the majority of the HSLRB (or...

Microbial colonization affects the efficiency of photovoltaic panels in a tropical environment.

PubMed

Shirakawa, Marcia A; Zilles, Roberto; Mocelin, Andre; Gaylarde, Christine C; Gorbushina, Anna; Heidrich, Gabriele; Giudice, Mauro C; Del Negro, Gilda M B; John, Vanderley M

2015-07-01

Sub-aerial biofilm (SAB) development on solar panels was studied in São Paulo. After 6, 12 and 18 months' exposure, photovoltaic panels were covered by increasing proportions of organic matter (42%, 53% and 58%, respectively). Fungi were an important component of these biofilms; very few phototrophs were found. Major microorganisms detected were melanised meristematic ascomycetes and pigmented bacterial genera Arthrobacter and Tetracoccus. While diverse algae, cyanobacteria and bacteria were identified in biofilms at 6 and 12 months, diversity at a later stage was reduced to that typical for SAB: the only fungal group detected in 18 month biofilm was the meristematic Dothideomycetes and the only phototrophs Ulothrix and Chlorella. Photovoltaic modules showed significant power reductions after 6, 12 (both 7%) and 18 (11%) months. The lack of difference in power reduction between 6 and 12 months reflects the dual nature of soiling, which can result from the deposition of particulates as well as from SAB fouling. Although 12-month old SAB demonstrated an almost 10-fold increase in fungal colonization and a higher organic content, the larger non-microbial particles (above 10 μm), which were important for efficiency reduction of lightly-biofilmed panels, were removed by high rainfall just before the 12-month sampling. Copyright © 2015 Elsevier Ltd. All rights reserved.

Galaxy Clusters

NASA Astrophysics Data System (ADS)

Miller, Christopher J. Miller

2012-03-01

There are many examples of clustering in astronomy. Stars in our own galaxy are often seen as being gravitationally bound into tight globular or open clusters. The Solar System's Trojan asteroids cluster at the gravitational Langrangian in front of Jupiter’s orbit. On the largest of scales, we find gravitationally bound clusters of galaxies, the Virgo cluster (in the constellation of Virgo at a distance of ˜50 million light years) being a prime nearby example. The Virgo cluster subtends an angle of nearly 8◦ on the sky and is known to contain over a thousand member galaxies. Galaxy clusters play an important role in our understanding of theUniverse. Clusters exist at peaks in the three-dimensional large-scale matter density field. Their sky (2D) locations are easy to detect in astronomical imaging data and their mean galaxy redshifts (redshift is related to the third spatial dimension: distance) are often better (spectroscopically) and cheaper (photometrically) when compared with the entire galaxy population in large sky surveys. Photometric redshift (z) [Photometric techniques use the broad band filter magnitudes of a galaxy to estimate the redshift. Spectroscopic techniques use the galaxy spectra and emission/absorption line features to measure the redshift] determinations of galaxies within clusters are accurate to better than delta_z = 0.05 [7] and when studied as a cluster population, the central galaxies form a line in color-magnitude space (called the the E/S0 ridgeline and visible in Figure 16.3) that contains galaxies with similar stellar populations [15]. The shape of this E/S0 ridgeline enables astronomers to measure the cluster redshift to within delta_z = 0.01 [23]. The most accurate cluster redshift determinations come from spectroscopy of the member galaxies, where only a fraction of the members need to be spectroscopically observed [25,42] to get an accurate redshift to the whole system. If light traces mass in the Universe, then the locations of galaxy clusters will be at locations of the peaks in the true underlying (mostly) dark matter density field. Kaiser (1984) [19] called this the high-peak model, which we demonstrate in Figure 16.1. We show a two-dimensional representation of a density field created by summing plane-waves with a predetermined power and with random wave-vector directions. In the left panel, we plot only the largest modes, where we see the density peaks (black) and valleys (white) in the combined field. In the right panel, we allow for smaller modes. You can see that the highest density peaks in the left panel contain smaller-scale, but still high-density peaks. These are the locations of future galaxy clusters. The bottom panel shows just these cluster-scale peaks. As you can see, the peaks themselves are clustered, and instead of just one large high-density peak in the original density field (see the left panel), the smaller modes show that six peaks are "born" within the broader, underlying large-scale density modes. This exemplifies the "bias" or amplified structure that is traced by galaxy clusters [19]. Clusters are rare, easy to find, and their member galaxies provide good distance estimates. In combination with their amplified clustering signal described above, galaxy clusters are considered an efficient and precise tracer of the large-scale matter density field in the Universe. Galaxy clusters can also be used to measure the baryon content of the Universe [43]. They can be used to identify gravitational lenses [38] and map the distribution of matter in clusters. The number and spatial distribution of galaxy clusters can be used to constrain cosmological parameters, like the fraction of the energy density in the Universe due to matter (Omega_matter) or the variation in the density field on fixed physical scales (sigma_8) [26,33]. The individual clusters act as “Island Universes” and as such are laboratories here we can study the evolution of the properties of the cluster, like the hot, gaseous intra-cluster medium or shapes, colors, and star-formation histories of the member galaxies [17].

Tracking Brain Development and Dimensional Psychiatric Symptoms in Children: A Longitudinal Population-Based Neuroimaging Study.

PubMed

Muetzel, Ryan L; Blanken, Laura M E; van der Ende, Jan; El Marroun, Hanan; Shaw, Philip; Sudre, Gustavo; van der Lugt, Aad; Jaddoe, Vincent W V; Verhulst, Frank C; Tiemeier, Henning; White, Tonya

2018-01-01

Psychiatric symptomatology during childhood predicts persistent mental illness later in life. While neuroimaging methodologies are routinely applied cross-sectionally to the study of child and adolescent psychopathology, the nature of the relationship between childhood symptoms and the underlying neurodevelopmental processes remains unclear. The authors used a prospective population-based cohort to delineate the longitudinal relationship between childhood psychiatric problems and brain development. A total of 845 children participated in the study. Psychiatric symptoms were measured with the parent-rated Child Behavior Checklist at ages 6 and 10. MRI data were collected at ages 8 and 10. Cross-lagged panel models and linear mixed-effects models were used to determine the associations between psychiatric symptom ratings and quantitative anatomic and white matter microstructural measures over time. Higher ratings for externalizing and internalizing symptoms at baseline predicted smaller increases in both subcortical gray matter volume and global fractional anisotropy over time. The reverse relationship did not hold; thus, baseline measures of gray matter and white matter were not significantly related to changes in symptom ratings over time. Children presenting with behavioral problems at an early age show differential subcortical and white matter development. Most neuroimaging models tend to explain brain differences observed in psychopathology as an underlying (causal) neurobiological substrate. However, the present work suggests that future neuroimaging studies showing effects that are pathogenic in nature should additionally explore the possibility of the downstream effects of psychopathology on the brain.

Exploring the impact of marital relationship on the mental health of children: Does parent-child relationship matter?

PubMed

Li, Chunkai; Jiang, Shan; Fan, Xiaoyan; Zhang, Qiunv

2018-04-01

This study aimed to examine the associations between marital relationships and parent-child relationships on children's mental health. Participants included 19,487 students from the 2013-2014 baseline China Education Panel Survey. Structural equation modeling was applied to analyze the data and results revealed that marital and parent-child relationships positively affected children's mental health. Parent-child relationship also played a mediating role between marital relationship and children's mental health. The unique contributions of this study and its theoretical and practical implications were discussed.

77 FR 14007 - Sunshine Act Meeting Notice

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-08

... DEFENSE NUCLEAR FACILITIES SAFETY BOARD Sunshine Act Meeting Notice Federal Register CITATION OF... THE MEETING: The Defense Nuclear Facilities Safety Board (Board) is expanding the matters to be.../ resolution of safety and technical issues across the defense nuclear facilities complex. Since this panel...

76 FR 45296 - In the Matter of Certain Flat Panel Display Devices, and Products Containing the Same; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-28

...-Hsin Road 2, Hsinchu Science Park, Hsinchu 30078, Taiwan. AU Optronics Corporation America, 1525... facts to be as alleged in the complaint and this notice and to enter an initial determination and a...

10 CFR 1.19 - Other committees, boards, and panels.

Code of Federal Regulations, 2011 CFR

2011-01-01

... of Nuclear Regulatory Research on important management matters in the direction of the Commission's... science, waste disposal and seismic and structural engineering. In performing its activities, the... information science and in managing records of the Commission's licensing process for the HLW repository. [52...

10 CFR 1.19 - Other committees, boards, and panels.

Code of Federal Regulations, 2013 CFR

2013-01-01

... of Nuclear Regulatory Research on important management matters in the direction of the Commission's... science, waste disposal and seismic and structural engineering. In performing its activities, the... information science and in managing records of the Commission's licensing process for the HLW repository. [52...

10 CFR 1.19 - Other committees, boards, and panels.

Code of Federal Regulations, 2010 CFR

2010-01-01

... of Nuclear Regulatory Research on important management matters in the direction of the Commission's... science, waste disposal and seismic and structural engineering. In performing its activities, the... information science and in managing records of the Commission's licensing process for the HLW repository. [52...

10 CFR 1.19 - Other committees, boards, and panels.

Code of Federal Regulations, 2012 CFR

2012-01-01

... of Nuclear Regulatory Research on important management matters in the direction of the Commission's... science, waste disposal and seismic and structural engineering. In performing its activities, the... information science and in managing records of the Commission's licensing process for the HLW repository. [52...

10 CFR 1.19 - Other committees, boards, and panels.

Code of Federal Regulations, 2014 CFR

2014-01-01

... of Nuclear Regulatory Research on important management matters in the direction of the Commission's... science, waste disposal and seismic and structural engineering. In performing its activities, the... information science and in managing records of the Commission's licensing process for the HLW repository. [52...

Acute decrease in HDL cholesterol associated with exposure to welding fumes.

PubMed

Rice, Mary Berlik; Cavallari, Jenn; Fang, Shona; Christiani, David

2011-01-01

To investigate acute changes in circulating lipids after exposure to relatively high levels of particulate matter through welding. Using a repeated measures panel study, lipid levels before and after welding and personal exposures to fine particulate matter (PM2.5) were measured in 36 male welders over 63 exposure and/or control days. There was a trend toward decrease in HDL (-2.3 mg/dL, P = 0.08) 18 hours after welding. This effect became significant (-2.6 mg/dL, P = 0.05) after adjustment for possible confounders. The effect was strongest (-4.3 mg/dL, P = 0.02) among welders who did not weld the day before the study. There were no significant changes in other lipids associated with welding or PM2.5 exposure. Welding exposure was associated with an acute decrease in circulating HDL, which may relate to the inflammatory and proatherosclerotic effects of fine particle exposure.

Association between pulmonary function and daily levels of sand dust particles assessed by light detection and ranging in schoolchildren in western Japan: A panel study.

PubMed

Watanabe, Masanari; Noma, Hisashi; Kurai, Jun; Kato, Kazuhiro; Sano, Hiroyuki; Tatsukawa, Toshiyuki; Nakazaki, Hirofumi; Yamasaki, Akira; Shimizu, Eiji

2016-01-01

An important aspect of sand dust emissions in association with respiratory disorders is the quantity of particulate matter. This is usually expressed as particulate matter less than 10 μm (PM10) and 2.5 μm (PM2.5). However, the composition of PM10 and PM2.5 varies. Light detection and ranging is used to monitor sand dust particles originating in East Asian deserts and distinguish them from air pollution aerosols. The objective of this study was to investigate the association between the daily levels of sand dust particles and pulmonary function in schoolchildren in western Japan. In this panel study, the peak expiratory flow (PEF) of 399 schoolchildren was measured daily from April to May 2012. A linear mixed model was used to estimate the association of PEF with the daily levels of sand dust particles, suspended particulate matter (SPM), and PM2.5. There was no association between the daily level of sand dust particles and air pollution aerosols, while both sand dust particles and air pollution aerosols had a significant association with SPM and PM2.5. An increment of 0.018 km(-1) in sand dust particles was significantly associated with a decrease in PEF (-3.62 L/min; 95% confidence interval, -4.66 to -2.59). An increase of 14.0 μg/m(3) in SPM and 10.7 μg/m(3) in PM2.5 led to a significant decrease of -2.16 L/min (-2.88 to -1.43) and -2.58 L/min (-3.59 to -1.57), respectively, in PEF. These results suggest that exposure to sand dust emission may relate to pulmonary dysfunction in children in East Asia. Copyright © 2015 The Authors. Production and hosting by Elsevier B.V. All rights reserved.

Method for contamination control and barrier apparatus with filter for containing waste materials that include dangerous particulate matter

DOEpatents

Pinson, Paul A.

1998-01-01

A container for hazardous waste materials that includes air or other gas carrying dangerous particulate matter has incorporated in barrier material, preferably in the form of a flexible sheet, one or more filters for the dangerous particulate matter sealably attached to such barrier material. The filter is preferably a HEPA type filter and is preferably chemically bonded to the barrier materials. The filter or filters are preferably flexibly bonded to the barrier material marginally and peripherally of the filter or marginally and peripherally of air or other gas outlet openings in the barrier material, which may be a plastic bag. The filter may be provided with a backing panel of barrier material having an opening or openings for the passage of air or other gas into the filter or filters. Such backing panel is bonded marginally and peripherally thereof to the barrier material or to both it and the filter or filters. A coupling or couplings for deflating and inflating the container may be incorporated. Confining a hazardous waste material in such a container, rapidly deflating the container and disposing of the container, constitutes one aspect of the method of the invention. The chemical bonding procedure for producing the container constitutes another aspect of the method of the invention.

Method for contamination control and barrier apparatus with filter for containing waste materials that include dangerous particulate matter

DOEpatents

Pinson, P.A.

1998-02-24

A container for hazardous waste materials that includes air or other gas carrying dangerous particulate matter has incorporated barrier material, preferably in the form of a flexible sheet, and one or more filters for the dangerous particulate matter sealably attached to such barrier material. The filter is preferably a HEPA type filter and is preferably chemically bonded to the barrier materials. The filter or filters are preferably flexibly bonded to the barrier material marginally and peripherally of the filter or marginally and peripherally of air or other gas outlet openings in the barrier material, which may be a plastic bag. The filter may be provided with a backing panel of barrier material having an opening or openings for the passage of air or other gas into the filter or filters. Such backing panel is bonded marginally and peripherally thereof to the barrier material or to both it and the filter or filters. A coupling or couplings for deflating and inflating the container may be incorporated. Confining a hazardous waste material in such a container, rapidly deflating the container and disposing of the container, constitutes one aspect of the method of the invention. The chemical bonding procedure for producing the container constitutes another aspect of the method of the invention. 3 figs.

78 FR 70072 - Meeting of the Military Compensation and Retirement Modernization Commission

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-22

... beneficiaries and other interested parties regarding pay, retirement, health benefits and quality of life... and education community representatives, and dining facilities, grocery and other quality of life... 12:30 p.m., Medical Services 3:00 p.m., Quality of Life Matters The Panel Testimony heard on both...

KSC-2010-4507

NASA Image and Video Library

2010-08-27

CAPE CANAVERAL, Fla. -- In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, technicians remove a side panel that protected the Alpha Magnetic Spectrometer, or AMS, during shipment. AMS, a state-of-the-art particle physics detector, is designed to operate as an external module on the International Space Station. It will use the unique environment of space to study the universe and its origin by searching for dark matter. The STS-134 crew will fly AMS to the International Space Station aboard space shuttle Endeavour, targeted to launch Feb. 26, 2011. Photo credit: NASA/Frankie Martin

Adult Social Capital and Track Placement of Ethnic Groups in Germany

ERIC Educational Resources Information Center

Cheng, Simon; Martin, Leslie; Werum, Regina E.

2007-01-01

The dictum that "context matters" notwithstanding, few researchers have focused on how social capital affects educational outcomes for ethnic groups outside of the United States. Using German Socioeconomic Panel (GSOEP) data, analyses highlight the group-specific effects of parental social capital on track placement among 11-16-year-old…

A Hospital's Contemporary Art Collection: Effects on Patient Mood, Stress, Comfort, and Expectations.

PubMed

Karnik, Meghana; Printz, Bellamy; Finkel, Jennifer

2014-01-01

It is not firmly established whether an art collection of diverse subject matter, media, and imagery in the hospital environment can play a significant role in mitigating the psychological stresses and physical pain associated with a hospital visit, or whether it improves patients' satisfaction with their care. The variety of contemporary art displayed in the institution investigated in this paper served as a case study to assess the qualitative and quantitative effects of such a collection on patient health and experience. We sought to assess whether the diversity in subject matter, imagery, and media would positively affect patient mood, comfort level, stress level, and expectation of visit. Previous research concluded that nature art (i.e., representational depictions of nature) has positive effects on patient health outcomes. Studies to date have assessed the effects of individual units of artwork rather than that of an art collection as a whole. A survey was sent to 4,376 members of an online Patient Panel, comprised of patients who volunteer to evaluate their experiences at Cleveland Clinic. For this study, Panel members were screened based on whether they had been to the Main Campus in the past 12 months. A majority of respondents noticed the artwork, had improved moods and stress levels due to the artwork, and reported that the art collection positively impacted their overall satisfaction and impression of the hospital. Our findings demonstrate that this particular collection has a significant effect on the patient experience and on self-reported mood, stress, comfort, and expectations. These results suggest that patients may respond positively to the diversity of the collection, and to other types of art in addition to nature art. Art, healing environments, hospital, patient-centered care, satisfaction, case study.

Oxidative Glial Cell Damage Associated with White Matter Lesions in the Aging Human Brain

PubMed Central

Al-Mashhadi, Sufana; Simpson, Julie E.; Heath, Paul R.; Dickman, Mark; Forster, Gillian; Matthews, Fiona E.; Brayne, Carol; Ince, Paul G.; Wharton, Stephen B.

2016-01-01

White matter lesions (WML) are common in brain aging and are associated with dementia. We aimed to investigate whether oxidative DNA damage and occur in WML and in apparently normal white matter in cases with lesions. Tissue from WML and control white matter from brains with lesions (controls lesional) and without lesions (controls non-lesional) were obtained, using post-mortem magnetic resonance imaging-guided sampling, from the Medical Research Council Cognitive Function and Ageing Study. Oxidative damage was assessed by immunohistochemistry to 8-hydroxy-2′-deoxoguanosine (8-OHdG) and Western blotting for malondialdehyde. DNA response was assessed by phosphorylated histone H2AX (γH2AX), p53, senescence markers and by quantitative Reverse transcription polymerase chain reaction (RT-PCR) panel for candidate DNA damage-associated genes. 8-OHdG was expressed in glia and endothelium, with increased expression in both WML and controls lesional compared with controls non-lesional (P < 0.001). γH2Ax showed a similar, although attenuated difference among groups (P = 0.03). Expression of senescence-associated β-galactosidase and p16 suggested induction of senescence mechanisms in glia. Oxidative DNA damage and a DNA damage response are features of WML pathogenesis and suggest candidate mechanisms for glial dysfunction. Their expression in apparently normal white matter in cases with WML suggests that white matter dysfunction is not restricted to lesions. The role of this field-effect lesion pathogenesis and cognitive impairment are areas to be defined. PMID:25311358

Air pollution and cardiovascular disease: a statement for healthcare professionals from the Expert Panel on Population and Prevention Science of the American Heart Association.

PubMed

Brook, Robert D; Franklin, Barry; Cascio, Wayne; Hong, Yuling; Howard, George; Lipsett, Michael; Luepker, Russell; Mittleman, Murray; Samet, Jonathan; Smith, Sidney C; Tager, Ira

2004-06-01

Air pollution is a heterogeneous, complex mixture of gases, liquids, and particulate matter. Epidemiological studies have demonstrated a consistent increased risk for cardiovascular events in relation to both short- and long-term exposure to present-day concentrations of ambient particulate matter. Several plausible mechanistic pathways have been described, including enhanced coagulation/thrombosis, a propensity for arrhythmias, acute arterial vasoconstriction, systemic inflammatory responses, and the chronic promotion of atherosclerosis. The purpose of this statement is to provide healthcare professionals and regulatory agencies with a comprehensive review of the literature on air pollution and cardiovascular disease. In addition, the implications of these findings in relation to public health and regulatory policies are addressed. Practical recommendations for healthcare providers and their patients are outlined. In the final section, suggestions for future research are made to address a number of remaining scientific questions.

Acute Decrease in HDL Cholesterol Associated With Exposure to Welding Fumes

PubMed Central

Rice, Mary Berlik; Cavallari, Jenn; Fang, Shona; Christiani, David

2011-01-01

Objective To investigate acute changes in circulating lipids after exposure to relatively high levels of particulate matter through welding. Methods Using a repeated measures panel study, lipid levels before and after welding and personal exposures to fine particulate matter (PM2.5) were measured in 36 male welders over 63 exposure and/or control days. Results There was a trend toward decrease in HDL (−2.3 mg/dL, P = 0.08) 18 hours after welding. This effect became significant (−2.6 mg/dL, P = 0.05) after adjustment for possible confounders. The effect was strongest (−4.3 mg/dL, P = 0.02) among welders who did not weld the day before the study. There were no significant changes in other lipids associated with welding or PM2.5 exposure. Conclusion Welding exposure was associated with an acute decrease in circulating HDL, which may relate to the inflammatory and proatherosclerotic effects of fine particle exposure. PMID:21187793

The measurement of disability weights for 18 prevalent acute poisoning conditions.

PubMed

Asadi, R; Afshari, R; Dadpour, B

2016-10-01

Disability weights (DWs) are used in disease burden studies, with the calculation of the weight of the disability as years lived with disability versus years of lost life accounting for mortalities. Currently, there is a single DW score available for poisoning, which is considered to be a single health state. This makes it difficult to evaluate the differing burdens of poisonings involving various substances/conditions in comparison with other health states in countries with different patterns of substance abuse. The aim of this study is therefore to estimate the DWs of 18 common poisonings based on the expert elicitation method. A panel of 10 medical clinicians who were familiar with the clinical aspects of different poisonings estimated the DWs of 50 health states by interpolating them on a calibrated Visual Analogue Scale. The DWs of some poisonings, such as alcohol, cannabis and heroin, had been estimated in previous studies and so were used to determine the external consistency of our panel. As a matter of routine, the DWs could vary on a scale between 0 (best health state) and 1 (worst health state). Statistical analysis showed that both the internal (Cronbach's α = 0.912) and external consistency of the panel were acceptable. The DWs for the different poisonings were estimated along a range from 0.830 for severe aluminium phosphide to 0.022 for mild benzodiazepine. Different poisonings should be weighted differently since they vary widely. Unfortunately, they are currently all weighted the same. © The Author(s) 2015.

The Research Triangle Park particulate matter panel study: PM mass concentration relationships

NASA Astrophysics Data System (ADS)

Williams, Ron; Suggs, Jack; Rea, Anne; Leovic, Kelly; Vette, Alan; Croghan, Carry; Sheldon, Linda; Rodes, Charles; Thornburg, Jonathan; Ejire, Ademola; Herbst, Margaret; Sanders, William

The US Environmental Protection Agency has recently performed the Research Triangle Park Particulate Matter Panel Study. This was a 1-year investigation of PM and related co-pollutants involving participants living within the RTP area of North Carolina. Primary goals were to characterize the relationships between ambient and residential PM measures to those obtained from personal exposure monitoring and estimate ambient source contributions to personal and indoor mass concentrations. A total of 38 participants living in 37 homes were involved in personal, residential indoor, residential outdoor and ambient PM 2.5 exposure monitoring. Participants were 30 non-smoking hypertensive African-Americans living in a low-moderate SES neighborhood (SE Raleigh, NC) and a cohort of eight individuals having implanted cardiac defibrillators (Chapel Hill, NC). Residential and ambient monitoring of PM 10 and PM 10-2.5 (coarse by differential) was also performed. The volunteers were monitored for seven consecutive days during each of four seasons (summer 2000, fall 2000, winter 2001, spring 2001). Individual PM 2.5 personal exposure concentrations ranged from 4 to 218 μg m -3 during the study. The highest personal exposures were determined to be the result of passive environmental tobacco exposures. Subsequently, ˜7% of the total number of personal exposure trials were excluded to minimize this pollutant's effect upon the overall analysis. Results indicated that a pooled data set (seasons, cohorts, residences, participants) was appropriate for investigation of the basic mass concentration relationships. Daily personal PM 2.5 mass concentrations were typically higher than their associated residential or ambient measurements (mean personal=23.0, indoor=19.1, outdoor=19.3, ambient=19.2 μg m -3). Mean personal PM 2.5 exposures were observed to be only moderately correlated to ambient PM 2.5 concentrations ( r=0.39).

How Much Do School Principals Matter When It Comes to Teacher Working Conditions?

ERIC Educational Resources Information Center

Burkhauser, Susan

2017-01-01

Teacher turnover is a challenge for U.S. public schools. Research suggests that teachers' perceptions of their school working conditions influence their leaving decisions. Related research suggests that principals may be in the best position to influence school working conditions. Using 4 years of panel data constructed from the North Carolina…

Report on the Conference on the Separating Serviceman Held at the National War College, 29-31 October 1969.

ERIC Educational Resources Information Center

Department of Defense, Washington, DC.

This conference enabled operators of training programs for separating servicemen to "talk shop" among themselves and with outside supporting agencies and organizations, both public and private. Panel discussions and speeches dealt with such matters as local administration of the TRANSITION Program; counseling and placement (including the…

29 CFR 2701.3 - Announcement of meetings.

Code of Federal Regulations, 2014 CFR

2014-07-01

... matter of a meeting, whether it is to be open or closed, and the name and phone number of the Commission... and docket numbers of the cases to be considered. The Commission shall also contact, by phone or mail... of the members of the Commission or a panel of three or more Commissioners determines by a recorded...

29 CFR 2701.3 - Announcement of meetings.

Code of Federal Regulations, 2011 CFR

2011-07-01

... matter of a meeting, whether it is to be open or closed, and the name and phone number of the Commission... and docket numbers of the cases to be considered. The Commission shall also contact, by phone or mail... of the members of the Commission or a panel of three or more Commissioners determines by a recorded...

29 CFR 2701.3 - Announcement of meetings.

Code of Federal Regulations, 2013 CFR

2013-07-01

... matter of a meeting, whether it is to be open or closed, and the name and phone number of the Commission... and docket numbers of the cases to be considered. The Commission shall also contact, by phone or mail... of the members of the Commission or a panel of three or more Commissioners determines by a recorded...

29 CFR 2701.3 - Announcement of meetings.

Code of Federal Regulations, 2012 CFR

2012-07-01

... matter of a meeting, whether it is to be open or closed, and the name and phone number of the Commission... and docket numbers of the cases to be considered. The Commission shall also contact, by phone or mail... of the members of the Commission or a panel of three or more Commissioners determines by a recorded...

Does Distance Determine Who Attends a University in Germany?

ERIC Educational Resources Information Center

Spiess, C. Katharina; Wrohlich, Katharina

2010-01-01

We analyze the role of distance to the nearest university in the demand for higher education in Germany. Distance could matter due to transaction costs or due to neighborhood effects. We use data from the German Socio-Economic Panel (SOEP) combined with a database on university postal codes to estimate a discrete choice model of the demand for…

75 FR 7452 - Notice of Partially Closed Meeting of the Chief of Naval Operations (CNO) Executive Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-19

... topics to be presented during the closed portion of the meeting are classified SECRET and SECRET//NOFORN... be kept secret in the interest of national defense. In addition, matters determined to be business sensitive (trade secrets and privileged commercial and financial information) are exempt from an open...

Physics in perspective. Volume 2, part A: The core subfields of physics

NASA Technical Reports Server (NTRS)

1972-01-01

Panel reports to the Survey Committee are presented to provide detailed technical background and documentation for committee findings, and to indicate the vitality and strength of the subfields of physics. Included are the core subfields of acoustics, optics, condensed matter, plasmas and fluids, atomic molecular and electron physics, nuclear physics, and elementary particle physics.

78 FR 56236 - Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Initial Review

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-12

... announced below concerns NIOSH Member Conflict Review, PA 07-318, initial review. In accordance with Section..., Management Analysis and Services Office, CDC, pursuant to Public Law 92-463. Matters To Be Discussed: The... to ``NIOSH Member Conflict Review, PA 07-318''. Contact Person for More Information: Nina Turner, Ph...

Effects of Airborne Particulate Matter on Respiratory Health in a Community near a Cement Factory in Chilanga, Zambia: Results from a Panel Study

PubMed Central

Nkhama, Emmy; Ndhlovu, Micky; Dvonch, J. Timothy; Lynam, Mary; Mentz, Graciela; Siziya, Seter; Voyi, Kuku

2017-01-01

We conducted a panel study to investigate seasonal variations in concentrations of airborne PM2.5 and PM10 and the effects on respiratory health in a community near a cement factory; in Chilanga; Zambia. A panel of 63 and 55 participants aged 21 to 59 years from a community located at the edge of the factory within 1 km and a control community located 18 km from the factory respectively; were followed up for three climatic seasons July 2015 to February 2016. Symptom diary questionnaires were completed and lung function measurements taken daily for 14 days in each of the three climatic seasons. Simultaneously, PM2.5 and PM10 concentrations in ambient air were monitored at a fixed site for each community. Mean seasonal concentrations of PM2.5 and PM10 ranged from 2.39–24.93 μg/m3 and 7.03–68.28 μg/m3 respectively in the exposed compared to the control community 1.69–6.03 μg/m3 and 2.26–8.86 μg/m3. The incident rates of reported respiratory symptoms were higher in the exposed compared to the control community: 46.3 vs. 13.8 for cough; 41.2 vs. 9.6 for phlegm; 49.0 vs.12.5 for nose; and 13.9 vs. 3.9 for wheeze per 100 person-days. There was a lower performance on all lung indices in the exposed community compared to the control; overall the mean FEV1 (forced expiratory volume in one second) and FVC (forced vital capacity) predicted percentage for the exposed was six and four percentage points lower than the control. Restriction of industrial emissions coupled with on-going monitoring and regulatory enforcement are needed to ensure that PM (airborne particulate matter) levels in the ambient air are kept within recommended levels to safeguard the respiratory health of nearby community residents. PMID:29113101

Mars Rover Concept Vehicle

NASA Image and Video Library

2017-06-05

The scientifically-themed Mars rover concept vehicle operates on an electric motor, powered by solar panels and a 700-volt battery. The rover separates in the middle with the front area designed for scouting and equipped with a radio and navigation provided by the Global Positioning System. The back section serves as a full laboratory which can disconnect for autonomous research. The "Summer of Mars" promotion is designed to provide guests with a better understanding of NASA's studies of the Red Planet. The builders of the rover, Parker Brothers Concepts of Port Canaveral, Florida, incorporated input into its design from NASA subject matter experts.

NASA Finds Direct Proof of Dark Matter

NASA Astrophysics Data System (ADS)

2006-08-01

Dark matter and normal matter have been wrenched apart by the tremendous collision of two large clusters of galaxies. The discovery, using NASA's Chandra X-ray Observatory and other telescopes, gives direct evidence for the existence of dark matter. "This is the most energetic cosmic event, besides the Big Bang, which we know about," said team member Maxim Markevitch of the Harvard-Smithsonian Center for Astrophysics in Cambridge, Mass. Lensing Illustration Gravitational Lensing Explanation These observations provide the strongest evidence yet that most of the matter in the universe is dark. Despite considerable evidence for dark matter, some scientists have proposed alternative theories for gravity where it is stronger on intergalactic scales than predicted by Newton and Einstein, removing the need for dark matter. However, such theories cannot explain the observed effects of this collision. "A universe that's dominated by dark stuff seems preposterous, so we wanted to test whether there were any basic flaws in our thinking," said Doug Clowe of the University of Arizona at Tucson, and leader of the study. "These results are direct proof that dark matter exists." Animation of Cluster Collision Animation of Cluster Collision In galaxy clusters, the normal matter, like the atoms that make up the stars, planets, and everything on Earth, is primarily in the form of hot gas and stars. The mass of the hot gas between the galaxies is far greater than the mass of the stars in all of the galaxies. This normal matter is bound in the cluster by the gravity of an even greater mass of dark matter. Without dark matter, which is invisible and can only be detected through its gravity, the fast-moving galaxies and the hot gas would quickly fly apart. The team was granted more than 100 hours on the Chandra telescope to observe the galaxy cluster 1E0657-56. The cluster is also known as the bullet cluster, because it contains a spectacular bullet-shaped cloud of hundred-million-degree gas. The X-ray image shows the bullet shape is due to a wind produced by the high-speed collision of a smaller cluster with a larger one. 4-Panel Illustrations of Cluster Collision 4-Panel Illustrations of Cluster Collision In addition to the Chandra observation, the Hubble Space Telescope, the European Southern Observatory's Very Large Telescope and the Magellan optical telescopes were used to determine the location of the mass in the clusters. This was done by measuring the effect of gravitational lensing, where gravity from the clusters distorts light from background galaxies as predicted by Einstein's theory of general relativity. The hot gas in this collision was slowed by a drag force, similar to air resistance. In contrast, the dark matter was not slowed by the impact, because it does not interact directly with itself or the gas except through gravity. This produced the separation of the dark and normal matter seen in the data. If hot gas was the most massive component in the clusters, as proposed by alternative gravity theories, such a separation would not have been seen. Instead, dark matter is required. Animation: Galaxy Cluster in Perspective Animation: Galaxy Cluster in Perspective "This is the type of result that future theories will have to take into account," said Sean Carroll, a cosmologist at the University of Chicago, who was not involved with the study. "As we move forward to understand the true nature of dark matter, this new result will be impossible to ignore." This result also gives scientists more confidence that the Newtonian gravity familiar on Earth and in the solar system also works on the huge scales of galaxy clusters. "We've closed this loophole about gravity, and we've come closer than ever to seeing this invisible matter," Clowe said. These results are being published in an upcoming issue of The Astrophysical Journal Letters. NASA's Marshall Space Flight Center, Huntsville, Ala., manages the Chandra program for the agency's Science Mission Directorate. The Smithsonian Astrophysical Observatory controls science and flight operations from the Chandra X-ray Center, Cambridge, Mass. Additional information and images can be found at: http://chandra.harvard.edu and http://chandra.nasa.gov

Oxidative Glial Cell Damage Associated with White Matter Lesions in the Aging Human Brain.

PubMed

Al-Mashhadi, Sufana; Simpson, Julie E; Heath, Paul R; Dickman, Mark; Forster, Gillian; Matthews, Fiona E; Brayne, Carol; Ince, Paul G; Wharton, Stephen B

2015-09-01

White matter lesions (WML) are common in brain aging and are associated with dementia. We aimed to investigate whether oxidative DNA damage and occur in WML and in apparently normal white matter in cases with lesions. Tissue from WML and control white matter from brains with lesions (controls lesional) and without lesions (controls non-lesional) were obtained, using post-mortem magnetic resonance imaging-guided sampling, from the Medical Research Council Cognitive Function and Ageing Study. Oxidative damage was assessed by immunohistochemistry to 8-hydroxy-2'-deoxoguanosine (8-OHdG) and Western blotting for malondialdehyde. DNA response was assessed by phosphorylated histone H2AX (γH2AX), p53, senescence markers and by quantitative Reverse transcription polymerase chain reaction (RT-PCR) panel for candidate DNA damage-associated genes. 8-OHdG was expressed in glia and endothelium, with increased expression in both WML and controls lesional compared with controls non-lesional (P < 0.001). γH2Ax showed a similar, although attenuated difference among groups (P = 0.03). Expression of senescence-associated β-galactosidase and p16 suggested induction of senescence mechanisms in glia. Oxidative DNA damage and a DNA damage response are features of WML pathogenesis and suggest candidate mechanisms for glial dysfunction. Their expression in apparently normal white matter in cases with WML suggests that white matter dysfunction is not restricted to lesions. The role of this field-effect lesion pathogenesis and cognitive impairment are areas to be defined. © 2014 The Authors. Brain Pathology published by John Wiley & Sons Ltd on behalf of International Society of Neuropathology.

Social connectedness and the transition from work to retirement.

PubMed

Lancee, Bram; Radl, Jonas

2012-07-01

Although there are numerous studies on the role of social connections in early working life, research that examines how social connectedness matters in the later stages of a career is scarce. The present study analyzes to what extent social connectedness affects the timing of the transition from work to retirement. We draw on data from the German Socioeconomic Panel Study (GSOEP) from the years 1985-2009 (N = 10,225), and we apply techniques of event history analysis. Social connectedness includes social gatherings with friends, relatives, and neighbors (informal participation) as well as engagement in voluntary and civic associations and local politics (formal participation). The findings demonstrate that social connectedness matters for the transition from work to retirement, but its impact depends on the type of participation. Whereas informal participation results in earlier retirement, formal participation delays labor force withdrawal. The findings suggest a trade-off between informal participation and work in later life, which leads people with frequent social contacts to opt for early retirement. By contrast, the fact that formal participation is associated with postponed retirement points to employment benefits of volunteering and civic engagement among older workers.

Astronomy and "Azulejo" Panels in Portuguese Jesuit Colleges

NASA Astrophysics Data System (ADS)

de Carvalho, Rosário Salema; Gessner, Samuel; Tirapicos, Luís

2015-05-01

In Portugal the Jesuits used tiles (azulejos) for parietal decoration of various areas of their colleges, especially in the second quarter of the 18th century. Various tile panels are still conserved in the important colleges of Lisbon and Évora. The iconographies address a variety of philosophical, historical and mathematical topics and scenes evoking the gentry's life; but they are to some extent illustrative of the subject matters taught by the different chairs. Astronomy is a major subject in the Aula da Esfera of the Santo Antão College in Lisbon, which was not destroyed during the great earthquake of 1755. In the Espirito Santo College in Évora there is also a hall preserved with astronomy and geometry topics. In this paper we will analyze the iconographical program for these parietal decorations in the context of the Jesuits' activities of teaching and practical astronomy. In particular, we will identify various printed sources from which the compositions on these panels derive.

Does Funding for HIV and Sexually Transmitted Disease Prevention Matter? Evidence from Panel Data

ERIC Educational Resources Information Center

Chesson, Harrell W.; Harrison, Paul; Scotton, Carol R.; Varghese, Beena

2005-01-01

Since the onset of the AIDS epidemic, the Centers for Disease Control and Prevention (CDC) has allocated several billion dollars for the prevention of HIV and other sexually transmitted diseases (STDs) in the United States. Using state-level data from 1981 to 1998, the authors found that greater amounts of prevention funding in a given year are…

The Politics of Parochiaid: An Analysis of the 1993 Report on the Roman Catholic Schools in New York State.

ERIC Educational Resources Information Center

Bauer, Norman J.

This paper explores the question of the use of public state funds to support Catholic or any other denominational, nonpublic school. Thomas Sobol, Commissioner of Education, asked the Blue Ribbon Panel to examine the following significant matters: (1) the stress on tradition and work-related economic values derived by graduates of Catholic…

Muscle mass decline, arterial stiffness, white matter hyperintensity, and cognitive impairment: Japan Shimanami Health Promoting Program study.

PubMed

Kohara, Katsuhiko; Okada, Yoko; Ochi, Masayuki; Ohara, Maya; Nagai, Tokihisa; Tabara, Yasuharu; Igase, Michiya

2017-08-01

There is a close association between frailty and cognitive impairment. However, the underlying contribution of sarcopenia to the development of cognitive impairment is unclear. We investigated the possible association between muscle mass decline and cognitive impairment in a cross-sectional study of 1518 subjects aged 55 years or above. We also evaluated arterial stiffness and white matter hyperintensities (WMHs) as possible underlying mechanisms for this association. Two sarcopenic indices were measured: thigh muscle cross-sectional area (CSA; calculated by computed tomography) and skeletal muscle mass (bioelectric impedance). Muscle mass decline was defined as either the bottom 10% or 20% of participants for each sex. Cognitive function was assessed using the Touch Panel-type Dementia Assessment Scale, and brachial-ankle pulse wave velocity was measured as an index of arterial stiffness. Both sarcopenic indices were modestly but significantly associated with brachial-ankle pulse wave velocity in male and female subjects. The presence of WMHs was significantly associated with low thigh muscle CSA in men and with low skeletal muscle mass in women. The Touch Panel-type Dementia Assessment Scale score was modestly but significantly and positively associated with thigh muscle CSA in men and skeletal muscle mass in women. Muscle mass decline in the bottom 10% of participants on both sarcopenic indices was significantly and independently related to cognitive impairment in women. Lower sarcopenic indices are significantly related to lower cognitive scores. Arterial stiffness and WMHs could account, at least in part, for this association. © 2017 The Authors. Journal of Cachexia, Sarcopenia and Muscle published by John Wiley & Sons Ltd on behalf of the Society on Sarcopenia, Cachexia and Wasting Disorders.

Substance Testing in the Fire Service: Making Public Safety a Matter of National Policy

DTIC Science & Technology

2014-03-01

25). Leshner (1999) submits that virtually every addictive substance—be it cocaine, marijuana , methamphetamine, heroin, or nicotine— appears to...safety sensitive. The DOT test panel tests for five classifications of drugs: amphetamines, cocaine, marijuana , opiates, and phencyclidine. When the...methods are laws, political/socio-cultural, pricing of services, and individual fire departments. Marijuana has been legalized in a number of states

From Ideas to Development: The Determinants of R&D and Patenting. OECD Economics Department Working Papers, No. 457

ERIC Educational Resources Information Center

Jaumotte, Florence; Pain, Nigel

2005-01-01

This paper uses panel regressions to investigate the effects of innovation policies and framework factors on business R&D intensity and patenting for a sample of 20 OECD countries over the period 1982- 2001. Both sets of factors are found to matter; the main determinants of innovativeness appear to be the availability of scientists and engineers,…

Federal Security Laboratory Governance Panels: Observations and Recommendations

DTIC Science & Technology

2013-01-01

operates under a sole-source, cost-plus-fixed-fee contract administered by the U.S. Navy’s Naval Sea Systems Command. There are currently 14 UARCs, 13... system of research organizations that support science and technology for U.S. national security. Within this system , the Departments of Defense, Energy...and Homeland Security support about 80 laboratories that focus predominantly on national security matters. These laboratories have different

Panel Discussion: Cover Crops Used at Vallonia Nursery, Indiana Division of Forestry

Treesearch

Robert Hawkins

2005-01-01

The use of cover crops is one essential step in management of nursery soils. Cover crops serve many different purposes within the soil. First, cover crops help in reducing erosion by stabilizing soil. Second, cover crops can be used as a visual guide to nutrient deficiencies in fields prior to sowing seedling crops. Most important, cover crops build organic matter,...

Particulate matter air pollution and respiratory symptoms in individuals having either asthma or chronic obstructive pulmonary disease: a European multicentre panel study.

PubMed

Karakatsani, Anna; Analitis, Antonis; Perifanou, Dimitra; Ayres, Jon G; Harrison, Roy M; Kotronarou, Anastasia; Kavouras, Ilias G; Pekkanen, Juha; Hämeri, Kaarle; Kos, Gerard Pa; de Hartog, Jeroen J; Hoek, Gerard; Katsouyanni, Klea

2012-10-05

Particulate matter air pollution has been associated with adverse health effects. The fraction of ambient particles that are mainly responsible for the observed health effects is still a matter of controversy. Better characterization of the health relevant particle fraction will have major implications for air quality policy since it will determine which sources should be controlled.The RUPIOH study, an EU-funded multicentre study, was designed to examine the distribution of various ambient particle metrics in four European cities (Amsterdam, Athens, Birmingham, Helsinki) and assess their health effects in participants with asthma or COPD, based on a detailed exposure assessment. In this paper the association of central site measurements with respiratory symptoms and restriction of activities is examined. At each centre a panel of participants with either asthma or COPD recorded respiratory symptoms and restriction of activities in a diary for six months. Exposure assessment included simultaneous measurements of coarse, fine and ultrafine particles at a central site. Data on gaseous pollutants were also collected. The associations of the 24-hour average concentrations of air pollution indices with the health outcomes were assessed in a hierarchical modelling approach. A city specific analysis controlling for potential confounders was followed by a meta-analysis to provide overall effect estimates. A 10 μg/m3 increase in previous day coarse particles concentrations was positively associated with most symptoms (an increase of 0.6 to 0.7% in average) and limitation in walking (OR= 1.076, 95% CI: 1.026-1.128). Same day, previous day and previous two days ozone concentrations were positively associated with cough (OR= 1.061, 95% CI: 1.013-1.111; OR= 1.049, 95% CI: 1.016-1.083 and OR= 1.059, 95% CI: 1.027-1.091, respectively). No consistent associations were observed between fine particle concentrations, nitrogen dioxide and respiratory health effects. As for particle number concentrations negative association (mostly non-significant at the nominal level) was observed with most symptoms whilst the positive association with limitation of activities did not reach the nominal level of significance. The observed associations with coarse particles are in agreement with the findings of toxicological studies. Together they suggest it is prudent to regulate also coarse particles in addition to fine particles.

Integrated environmental impact assessment: a Canadian example.

PubMed Central

Kwiatkowski, Roy E.; Ooi, Maria

2003-01-01

The Canadian federal process for environmental impact assessment (EIA) integrates health, social, and environmental aspects into either a screening, comprehensive study, or a review by a public panel, depending on the expected severity of potential adverse environmental effects. In this example, a Public Review Panel considered a proposed diamond mining project in Canada's northern territories, where 50% of the population are Aboriginals. The Panel specifically instructed the project proposer to determine how to incorporate traditional knowledge into the gathering of baseline information, preparing impact prediction, and planning mitigation and monitoring. Traditional knowledge is defined as the knowledge, innovations and practices of indigenous and/or local communities developed from experience gained over the centuries and adapted to local culture and environment. The mining company was asked to consider in its EIA: health, demographics, social and cultural patterns; services and infrastructure; local, regional and territorial economy; land and resource use; employment, education and training; government; and other matters. Cooperative efforts between government, industry and the community led to a project that coordinated the concerns of all interested stakeholders and the needs of present and future generations, thereby meeting the goals of sustainable development. The mitigation measures that were implemented take into account: income and social status, social support networks, education, employment and working conditions, physical environments, personal health practices and coping skills, and health services. PMID:12894328

KSC-2010-4508

NASA Image and Video Library

2010-08-27

CAPE CANAVERAL, Fla. -- In the Space Station Processing Facility at NASA's Kennedy Space Center in Florida, the protective panels that covered the Alpha Magnetic Spectrometer, or AMS, have been removed so that the technicians can begin preparing it for launch. AMS, a state-of-the-art particle physics detector, is designed to operate as an external module on the International Space Station. It will use the unique environment of space to study the universe and its origin by searching for dark matter. The STS-134 crew will fly AMS to the International Space Station aboard space shuttle Endeavour, targeted to launch Feb. 26, 2011. Photo credit: NASA/Frankie Martin

Mars Rover Concept Vehicle

NASA Image and Video Library

2017-06-05

The scientifically-themed Mars rover concept vehicle operates on an electric motor, powered by solar panels and a 700-volt battery. The back section opens and serves as a laboratory which can disconnect for autonomous research. While this exact rover is not expected to operate on Mars, one or more of its elements could make its way into a rover astronauts will drive on the Red Planet. The "Summer of Mars" promotion is designed to provide guests with a better understanding of NASA's studies of the Red Planet. The builders of the rover, Parker Brothers Concepts of Port Canaveral, Florida, incorporated input into its design from NASA subject matter experts.

Effects of vibratory microscreening on proximate composition and recovery of poultry processing wastewater particulate matter.

PubMed

Kiepper, B H; Merka, W C; Fletcher, D L

2008-12-01

Experiments were conducted to compare the effects of tertiary microscreen gap size on the proximate composition and rate of recovery of particulate matter from poultry processing wastewater (PPW). A high-speed vibratory screen was installed within the wastewater treatment area of a southeast US broiler slaughter plant after the existing primary and secondary mechanical rotary screens. Microscreen panels with nominal gap size openings of 212, 106 and 45mum were investigated. The particulate matter samples recovered were subjected to proximate analysis to determine percent moisture, fat, protein, crude fiber and ash. The average percent wet weight moisture (%WW) content for all samples was 79.1. The average percent dry matter (%DM) fat, protein, crude fiber and ash were 63.5, 17.5, 4.8 and 1.5, respectively. The mean concentration of total solids (TS) recovered from all microscreen runs was 668mg/L, which represents a potential additional daily offal recovery rate of 12.1metric tons (MT) per 3.78 million L (1.0 million gallons US) of PPW. There was no significant difference in the performance of the three microscreen gap sizes with regard to proximate composition or mass of particulate matter recovered.

Mediated Leader Effects: The Impact of Newspapers' Portrayal of Party Leadership on Electoral Support.

PubMed

Aaldering, Loes; van der Meer, Tom; Van der Brug, Wouter

2018-01-01

Conventional wisdom holds that party leaders matter in democratic elections. As very few voters have direct contact with party leaders, media are voters' primary source of information about these leaders and, thus, the likely origin of leader effects on party support. Our study focuses on these supposed electoral effects of the media coverage of party leaders. We examine the positive and negative effects of specific leadership images in Dutch newspapers on vote intentions. To this end, we combine an extensive automated content analysis of leadership images in the media with a panel data set, the Dutch 1Vandaag Opinion Panel (1VOP), consisting of more than fifty thousand unique respondents and 110 waves of interviews conducted between September 2006 and September 2012. The results confirm that media coverage of party leaders' character traits affects voters: Positive mediated leadership images increase support for the leader's party, while negative images decrease this support. However, this influence is not unconditional: During campaign periods, positive leadership images have a stronger effect, while negative images no longer have an impact on subsequent vote intentions.

Mediated Leader Effects: The Impact of Newspapers’ Portrayal of Party Leadership on Electoral Support

PubMed Central

Aaldering, Loes; van der Meer, Tom; Van der Brug, Wouter

2017-01-01

Conventional wisdom holds that party leaders matter in democratic elections. As very few voters have direct contact with party leaders, media are voters’ primary source of information about these leaders and, thus, the likely origin of leader effects on party support. Our study focuses on these supposed electoral effects of the media coverage of party leaders. We examine the positive and negative effects of specific leadership images in Dutch newspapers on vote intentions. To this end, we combine an extensive automated content analysis of leadership images in the media with a panel data set, the Dutch 1Vandaag Opinion Panel (1VOP), consisting of more than fifty thousand unique respondents and 110 waves of interviews conducted between September 2006 and September 2012. The results confirm that media coverage of party leaders’ character traits affects voters: Positive mediated leadership images increase support for the leader’s party, while negative images decrease this support. However, this influence is not unconditional: During campaign periods, positive leadership images have a stronger effect, while negative images no longer have an impact on subsequent vote intentions. PMID:29527251

Impact of salt reduction on biogenic amines, fatty acids, microbiota, texture and sensory profile in traditional blood dry-cured sausages.

PubMed

Laranjo, Marta; Gomes, Ana; Agulheiro-Santos, Ana Cristina; Potes, Maria Eduarda; Cabrita, Maria João; Garcia, Raquel; Rocha, João Miguel; Roseiro, Luísa Cristina; Fernandes, Maria José; Fraqueza, Maria João; Elias, Miguel

2017-03-01

Meat industry needs to reduce salt in their products due to health issues. The present study evaluated the effect of salt reduction from 6% to 3% in two Portuguese traditional blood dry-cured sausages. Physicochemical and microbiological parameters, biogenic amines, fatty acids and texture profiles and sensory panel evaluations were considered. Differences due to salt reduction were perceptible in a faint decline of water activity, which slightly favoured microbial growth. Total biogenic amines content ranged from 88.86 to 796.68mgkg -1 fresh matter, with higher amounts, particularly of cadaverine, histamine and tyramine, in low-salt products. Still, histamine and other vasoactive amines remained at low levels, thus not affecting consumers' health. Regarding fatty acids, no significant differences were observed due to salt. However, texture profile analysis revealed lower resilience and cohesiveness in low-salt products, although no textural changes were observed by the sensory panel. Nevertheless, low-salt sausages were clearly preferred by panellists. Copyright © 2016 Elsevier Ltd. All rights reserved.

Progress of the Enhanced Hanford Single Shell Tank (SST) Integrity Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Venetz, Theodore J.; Washenfelder, Dennis J.; Boomer, Kayle D.

2015-01-07

To improve the understanding of the single-shell tanks (SSTs) integrity, Washington River Protection Solutions, LLC (WRPS), the USDOE Hanford Site tank contractor, developed an enhanced Single-Shell Tank Integrity Project (SSTIP) in 2009. An expert panel on SST integrity, consisting of various subject matters experts in industry and academia, was created to provide recommendations supporting the development of the project. This panel developed 33 recommendations in four main areas of interest: structural integrity, liner degradation, leak integrity and prevention, and mitigation of contamination migration. In late 2010, seventeen of these recommendations were used to develop the basis for the M-45-10-1 Changemore » Package for the Hanford Federal Agreement and Compliance Order, which is also known as the Tri-Party Agreement.« less

Tackling reliability and construct validity: the systematic development of a qualitative protocol for skill and incident analysis.

PubMed

Savage, Trevor Nicholas; McIntosh, Andrew Stuart

2017-03-01

It is important to understand factors contributing to and directly causing sports injuries to improve the effectiveness and safety of sports skills. The characteristics of injury events must be evaluated and described meaningfully and reliably. However, many complex skills cannot be effectively investigated quantitatively because of ethical, technological and validity considerations. Increasingly, qualitative methods are being used to investigate human movement for research purposes, but there are concerns about reliability and measurement bias of such methods. Using the tackle in Rugby union as an example, we outline a systematic approach for developing a skill analysis protocol with a focus on improving objectivity, validity and reliability. Characteristics for analysis were selected using qualitative analysis and biomechanical theoretical models and epidemiological and coaching literature. An expert panel comprising subject matter experts provided feedback and the inter-rater reliability of the protocol was assessed using ten trained raters. The inter-rater reliability results were reviewed by the expert panel and the protocol was revised and assessed in a second inter-rater reliability study. Mean agreement in the second study improved and was comparable (52-90% agreement and ICC between 0.6 and 0.9) with other studies that have reported inter-rater reliability of qualitative analysis of human movement.

Lights, Camera: Learning! Findings from studies of video in formal and informal science education

NASA Astrophysics Data System (ADS)

Borland, J.

2013-12-01

As part of the panel, media researcher, Jennifer Borland, will highlight findings from a variety of studies of videos across the spectrum of formal to informal learning, including schools, museums, and in viewers homes. In her presentation, Borland will assert that the viewing context matters a great deal, but there are some general take-aways that can be extrapolated to the use of educational video in a variety of settings. Borland has served as an evaluator on several video-related projects funded by NASA and the the National Science Foundation including: Data Visualization videos and Space Shows developed by the American Museum of Natural History, DragonflyTV, Earth the Operators Manual, The Music Instinct and Time Team America.

A panel study of occupational exposure to fine particulate matter and changes in DNA methylation over a single workday and years worked in boilermaker welders

PubMed Central

2013-01-01

Background Exposure to pollutants including metals and particulate air pollution can alter DNA methylation. Yet little is known about intra-individual changes in DNA methylation over time in relationship to environmental exposures. Therefore, we evaluated the effects of acute- and chronic metal-rich PM2.5 exposures on DNA methylation. Methods Thirty-eight male boilermaker welders participated in a panel study for a total of 54 person days. Whole blood was collected prior to any welding activities (pre-shift) and immediately after the exposure period (post-shift). The percentage of methylated cytosines (%mC) in LINE-1, Alu, and inducible nitric oxide synthase gene (iNOS) were quantified using pyrosequencing. Personal PM2.5 (particulate matter with an aerodynamic diameter ≤ 2.5 μm) was measured over the work-shift. A questionnaire assessed job history and years worked as a boilermaker. Linear mixed models with repeated measures evaluated associations between DNA methylation, PM2.5 concentration (acute exposure), and years worked as a boilermaker (chronic exposure). Results PM2.5 exposure was associated with increased methylation in the promoter region of the iNOS gene (β = 0.25, SE: 0.11, p-value = 0.04). Additionally, the number of years worked as a boilermaker was associated with increased iNOS methylation (β = 0.03, SE: 0.01, p-value = 0.03). No associations were observed for Alu or LINE-1. Conclusions Acute and chronic exposure to PM2.5 generated from welding activities was associated with a modest change in DNA methylation of the iNOS gene. Future studies are needed to confirm this association and determine if the observed small increase in iNOS methylation are associated with changes in NO production or any adverse health effect. PMID:23758843

Recent versus chronic exposure to particulate matter air pollution in association with neurobehavioral performance in a panel study of primary schoolchildren.

PubMed

Saenen, Nelly D; Provost, Eline B; Viaene, Mineke K; Vanpoucke, Charlotte; Lefebvre, Wouter; Vrijens, Karen; Roels, Harry A; Nawrot, Tim S

2016-10-01

Children's neuropsychological abilities are in a developmental stage. Recent air pollution exposure and neurobehavioral performance are scarcely studied. In a panel study, we repeatedly administered to each child the following neurobehavioral tests: Stroop Test (selective attention) and Continuous Performance Test (sustained attention), Digit Span Forward and Backward Tests (short-term memory), and Digit-Symbol and Pattern Comparison Tests (visual information processing speed). At school, recent inside classroom particulate matter ≤2.5 or 10μm exposure (PM2.5, PM10) was monitored on each examination day. At the child's residence, recent (same day up to 2days before) and chronic (365days before examination) exposures to PM2.5, PM10 and black carbon (BC) were modeled. Repeated neurobehavioral test performances (n=894) of the children (n=310) reflected slower Stroop Test (p=0.05) and Digit-Symbol Test (p=0.01) performances with increasing recent inside classroom PM2.5 exposure. An interquartile range (IQR) increment in recent residential outdoor PM2.5 exposure was associated with an increase in average latency of 0.087s (SE: ±0.034; p=0.01) in the Pattern Comparison Test. Regarding chronic exposure at residence, an IQR increment of PM2.5 exposure was associated with slower performances in the Continuous Performance (9.45±3.47msec; p=0.007) and Stroop Tests (59.9±26.5msec; p=0.02). Similar results were obtained for PM10 exposure. In essence, we showed differential neurobehavioral changes robustly and adversely associated with recent or chronic ambient exposure to PM air pollution at residence, i.e., with recent exposure for visual information processing speed (Pattern Comparison Test) and with chronic exposure for sustained and selective attention. Copyright © 2016. Published by Elsevier Ltd.

Public participation in IRP process: A short note paper summarizing a panel session at the July 1994 summer power meeting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fisher, C.; Esteb, N.; Greene, E.R. Jr.

1996-11-01

Times are changing in the utility industry and public groups are taking a more active role in the Integrated Resource Planning Process by presenting their advice and consultation on matters of public concerns as evidenced by the following abstracts that summarize the panel session held during the 1994 Summer Power Meeting in San Francisco, California. Carol Fisher, ABB Systems Control, Automated Distribution Division, chaired the session; while Nancy Esteb of Pacificorp, Earl Greene, Jr. of Florida Power Corporation and Benjamin Hobbs of Case Western Reserve University were the panelists. Each panelist presented a different perspective on public participation in themore » IRP process with examples of how their companies developed and implemented this process. The papers summarize the individual presentations and discussions.« less

Executive Summary From the National Strength and Conditioning Association's Second Blue Ribbon Panel on Military Physical Readiness: Military Physical Performance Testing.

PubMed

Nindl, Bradley C; Alvar, Brent A; R Dudley, Jason; Favre, Mike W; Martin, Gerard J; Sharp, Marilyn A; Warr, Brad J; Stephenson, Mark D; Kraemer, William J

2015-11-01

The National Strength and Conditioning Association's tactical strength and conditioning program sponsored the second Blue Ribbon Panel on military physical readiness: military physical performance testing, April 18-19, 2013, Norfolk, VA. This meeting brought together a total of 20 subject matter experts (SMEs) from the U.S. Air Force, Army, Marine Corps, Navy, and academia representing practitioners, operators, researchers, and policy advisors to discuss the current state of physical performance testing across the Armed Services. The SME panel initially rated 9 common military tasks (jumping over obstacles, moving with agility, carrying heavy loads, dragging heavy loads, running long distances, moving quickly over short distances, climbing over obstacles, lifting heavy objects, loading equipment) by the degree to which health-related fitness components (e.g., aerobic fitness, muscular strength, muscular endurance, flexibility, and body composition) and skill-related fitness components (e.g., muscular power, agility, balance, coordination, speed, and reaction time) were required to accomplish these tasks. A scale from 1 to 10 (10 being highest) was used. Muscular strength, power, and endurance received the highest rating scores. Panel consensus concluded that (a) selected fitness components (particularly for skill-related fitness components) are currently not being assessed by the military; (b) field-expedient options to measure both health-based and skill-based fitness components are currently available; and (c) 95% of the panel concurred that all services should consider a tier II test focused on both health-related and skill-related fitness components based on occupational, functional, and tactical military performance requirements.

How relevant is environmental quality to per capita health expenditures? Empirical evidence from panel of developing countries.

PubMed

Yahaya, Adamu; Nor, Norashidah Mohamed; Habibullah, Muzafar Shah; Ghani, Judhiana Abd; Noor, Zaleha Mohd

2016-01-01

Developing countries have witnessed economic growth as their GDP keeps increasing steadily over the years. The growth led to higher energy consumption which eventually leads to increase in air pollutions that pose a danger to human health. People's healthcare demand, in turn, increase due to the changes in the socioeconomic life and improvement in the health technology. This study is an attempt to investigate the impact of environmental quality on per capital health expenditure in 125 developing countries within a panel cointegration framework from 1995 to 2012. We found out that a long-run relationship exists between per capita health expenditure and all explanatory variables as they were panel cointegrated. The explanatory variables were found to be statistically significant in explaining the per capita health expenditure. The result further revealed that CO2 has the highest explanatory power on the per capita health expenditure. The impact of the explanatory power of the variables is greater in the long-run compared to the short-run. Based on this result, we conclude that environmental quality is a powerful determinant of health expenditure in developing countries. Therefore, developing countries should as a matter of health care policy give provision of healthy air a priority via effective policy implementation on environmental management and control measures to lessen the pressure on health care expenditure. Moreover more environmental proxies with alternative methods should be considered in the future research.

Price responsiveness of demand for cigarettes: does rationality matter?

PubMed

Laporte, Audrey

2006-01-01

Meta-analysis is applied to aggregate-level studies that model the demand for cigarettes using static, myopic, or rational addiction frameworks in an attempt to synthesize key findings in the literature and to identify determinants of the variation in reported price elasticity estimates across studies. The results suggest that the rational addiction framework produces statistically similar estimates to the static framework but that studies that use the myopic framework tend to report more elastic price effects. Studies that applied panel data techniques or controlled for cross-border smuggling reported more elastic price elasticity estimates, whereas the use of instrumental variable techniques and time trends or time dummy variables produced less elastic estimates. The finding that myopic models produce different estimates than either of the other two model frameworks underscores that careful attention must be given to time series properties of the data.

Dying for a smoke: how much does differential mortality of smokers affect estimated life-course smoking prevalence?

PubMed

Christopoulou, Rebekka; Han, Jeffrey; Jaber, Ahmed; Lillard, Dean R

2011-01-01

An extensive literature uses reconstructed historical smoking rates by birth-cohort to inform anti-smoking policies. This paper examines whether and how these rates change when one adjusts for differential mortality of smokers and non-smokers. Using retrospectively reported data from the US (Panel Study of Income Dynamics, 1986, 1999, 2001, 2003, 2005), the UK (British Household Panel Survey, 1999, 2002), and Russia (Russian Longitudinal Monitoring Study, 2000), we generate life-course smoking prevalence rates by age-cohort. With cause-specific death rates from secondary sources and an improved method, we correct for differential mortality, and we test whether adjusted and unadjusted rates statistically differ. With US data (National Health Interview Survey, 1967-2004), we also compare contemporaneously measured smoking prevalence rates with the equivalent rates from retrospective data. We find that differential mortality matters only for men. For Russian men over age 70 and US and UK men over age 80 unadjusted smoking prevalence understates the true prevalence. The results using retrospective and contemporaneous data are similar. Differential mortality bias affects our understanding of smoking habits of old cohorts and, therefore, of inter-generational patterns of smoking. Unless one focuses on the young, policy recommendations based on unadjusted smoking rates may be misleading. Copyright © 2010 Elsevier Inc. All rights reserved.

The effects of air pollution on individual psychological distress.

PubMed

Sass, Victoria; Kravitz-Wirtz, Nicole; Karceski, Steven M; Hajat, Anjum; Crowder, Kyle; Takeuchi, David

2017-11-01

This study is the first of its kind to utilize longitudinal, nationally representative panel data from the United States to assess the relationship between exposure to air pollution and reports of psychological distress. Using annual-average measures of air pollution in respondents' census blocks of residence we find that over the period 1999-2011 particulate matter 2.5 is significantly associated with increased psychological distress; this association remains even after controlling for a robust set of demographic, socioeconomic, and health-related covariates. This study suggests that public health efforts to reduce the personal and societal costs of mental illness should consider addressing not only individual characteristics and factors in the social environment, but also underexplored facets of the physical environment such as air pollution. Copyright © 2017 Elsevier Ltd. All rights reserved.

Panel Discussion Vi: Cosmology

NASA Astrophysics Data System (ADS)

Anderson, E.; Dolgov, A.; Crothers, S.; Mitra, A.; Rubakov, V.; Zakharov, A.

2014-03-01

Questions to discuss: * To what extent are Dark Matter and Dark Energy necessary to explain the observed properties of the Universe? * Why are the Dark matter profiles so universal at the galactic scales? * Are there viable candidates of modified gravitational dynamics to exclude the dark components of Universe? * Do we have any perspectives to distinguish the Dark Energy from the cosmological constant? * Are there any certain indications for sterile neutrinos in the cosmos? * How does the Planck data change the view of inflation in the early Universe? What could be the origin of the inflaton plateau? So far, what else is interesting about the Planck data? * What are the nearest crucial points in cosmological observations? * Can we be more decisive discriminating between the anthropic principle, the superstringy landscape, fine tuning or dynamics as reasons for the cosmological coincidences?

The relationship between traffic-related air pollutants and cardiac autonomic function in a panel of healthy adults: a further analysis with existing data.

PubMed

Wu, Shaowei; Deng, Furong; Niu, Jie; Huang, Qinsheng; Liu, Youcheng; Guo, Xinbiao

2011-04-01

Epidemiological studies have linked particulate matter (PM) and carbon monoxide (CO) exposures with alterations in cardiac autonomic function as measured by heart rate variability (HRV) in populations. Recently, we reported association of several HRV indices with marked changes in particulate air pollution around the Beijing 2008 Olympic Games in a panel of healthy adults. We further investigated the cardiac effects of traffic-related air pollutants over wide exposure ranges with expanded data set in this panel of healthy adults. We obtained real-time data on nine taxi drivers' in-car exposures to PM ≤ 2.5 µm in aerodynamic diameter (PM₂.₅) and CO and on multiple HRV indices during a separate daily work shift in four study periods with dramatically changing air pollution levels around the Beijing 2008 Olympic Games. Mixed effect models and a less smoother method were used to investigate the associations of exposures with HRV indices. Results showed overall negative associations of traffic-related air pollutants with HRV indices across periods, as well as differences in period-specific and individual associations. After stratifying the individuals into two different response groups (positive/negative), cardiac effects of air pollutants became stronger within each group. Exposure-response modeling identified changed curvilinear relationships between air pollution exposures and HRV indices with threshold effects. Our results support the association of exposure to traffic-related air pollution with altered cardiac autonomic function in young healthy adults free of cardiovascular compromises. These results suggest a complicated mechanism that traffic-related air pollutants influence the cardiovascular system of healthy adults.

Supporting the Evaluation and Implementation of Musculoskeletal Models of Care: A Globally Informed Framework for Judging Readiness and Success.

PubMed

Briggs, Andrew M; Jordan, Joanne E; Jennings, Matthew; Speerin, Robyn; Bragge, Peter; Chua, Jason; Woolf, Anthony D; Slater, Helen

2017-04-01

To develop a globally informed framework to evaluate readiness for implementation and success after implementation of musculoskeletal models of care (MOCs). Three phases were undertaken: 1) a qualitative study with 27 Australian subject matter experts (SMEs) to develop a draft framework; 2) an eDelphi study with an international panel of 93 SMEs across 30 nations to evaluate face validity, and refine and establish consensus on the framework components; and 3) translation of the framework into a user-focused resource and evaluation of its acceptability with the eDelphi panel. A comprehensive evaluation framework was developed for judging the readiness and success of musculoskeletal MOCs. The framework consists of 9 domains, with each domain containing a number of themes underpinned by detailed elements. In the first Delphi round, scores of "partly agree" or "completely agree" with the draft framework ranged 96.7%-100%. In the second round, "essential" scores ranged 58.6%-98.9%, resulting in 14 of 34 themes being classified as essential. SMEs strongly agreed or agreed that the final framework was useful (98.8%), usable (95.1%), credible (100%) and appealing (93.9%). Overall, 96.3% strongly supported or supported the final structure of the framework as it was presented, while 100%, 96.3%, and 100% strongly supported or supported the content within the readiness, initiating implementation, and success streams, respectively. An empirically derived framework to evaluate the readiness and success of musculoskeletal MOCs was strongly supported by an international panel of SMEs. The framework provides an important internationally applicable benchmark for the development, implementation, and evaluation of musculoskeletal MOCs. © 2016, American College of Rheumatology.

Acute effects of particulate matter on respiratory diseases, symptoms and functions:. epidemiological results of the Austrian Project on Health Effects of Particulate Matter (AUPHEP)

NASA Astrophysics Data System (ADS)

Neuberger, Manfred; Schimek, Michael G.; Horak, Friedrich; Moshammer, Hanns; Kundi, Michael; Frischer, Thomas; Gomiscek, Bostjan; Puxbaum, Hans; Hauck, Helger; Auphep-Team

To examine hypotheses regarding health effects of particulate matter, we conducted time series studies in Austrian urban and rural areas. Of the pollutants measured, ambient PM 2.5 was most consistently associated with parameters of respiratory health. Time series studies applying semiparametric generalized additive models showed significant increases of respiratory hospital admissions (ICD 490-496) at age 65 and older. The early increase of 5.5% in Vienna at a lag of 2 days in males and of 5.6% per 10 μg/m 3 at a lag of 3 days in females was not observed in a nearby rural area. Another increase of respiratory admissions (mainly COPD) was observed after a lag of 10-11 days. A time series on a panel of 56 healthy preschool children showed a significant impact of the carbonaceous fraction of PM 2.5 on tidal breathing pattern assessed by inductive plethysmography. In repeated oscillometric measurements of respiratory resistance in 164 healthy elementary school children not only immediate responses to fine particulates were found but also latent ones, possibly indicating inflammatory changes in airways. It may be speculated that the improvements of urban air quality prevented measurable effects on respiratory mortality. More sensitive indicators, however, still show acute impairments of respiratory function and health in elderly and children which are associated with fine particulates and subfractions related to motor traffic.

Panel Discussion: Near Real Time Imagery Intelligence How Will We Do It?

NASA Astrophysics Data System (ADS)

Andraitis, Arthur A.; Crane, Alfred C.; Daniels, George; Graham, Johnny; LaGesse, Francis R.

1987-02-01

This afternoon's panel discussion will address near real time imagery and intelligence--how will we do it? Our moderator is Arthur Andraitis, a consultant in intelligence reconnaissance systems and international marketing. He was commissioned in the United States Air Force out of the University of Idaho, and entered the Air Force in 1955 where he became an Image Intelligence Officer serving in a variety of intelligence and reconnaisance related assignments, including two tours each in Asia and Europe supporting tactical theater and national level operations. He also suffered through two Pentagon tours--one as Branch Chief of the Imagery Branch for the Assistant Chief of Staff for Intelligence. He was the U. S. National Coordinator for two NATO intelligence and reconnaissance panels, and served several assignments in support of special operations, which included a year with the special forces in Viet Nam where he flew many missions in L-19s, 01 and assault helicopters. He has been an advisor on intelligence and reconnaissance matters to several foreign countries. In 1978 he retired from the United States Air Force, went to work for Itek, and then became an independent consultant in intelligence and reconaissance systems. I would like to introduce Art Andraitis.

Sensory quality and appropriateness of raw and boiled Jerusalem artichoke tubers (Helianthus tuberosus L.).

PubMed

Bach, Vibe; Kidmose, Ulla; Thybo, Anette K; Edelenbos, Merete

2013-03-30

The aim of the present study was to investigate the sensory attributes, dry matter and sugar content of five varieties of Jerusalem artichoke tubers and their relation to the appropriateness of the tubers for raw and boiled preparation. Sensory evaluation of raw and boiled Jerusalem artichoke tubers was performed by a trained sensory panel and a semi-trained consumer panel of 49 participants, who also evaluated the appropriateness of the tubers for raw and boiled preparation. The appropriateness of raw Jerusalem artichoke tubers was related to Jerusalem artichoke flavour, green nut flavour, sweetness and colour intensity, whereas the appropriateness of boiled tubers was related to celeriac aroma, sweet aroma, sweetness and colour intensity. In both preparations the variety Dwarf stood out from the others by being the least appropriate tuber. A few sensory attributes can be used as predictors of the appropriateness of Jerusalem artichoke tubers for raw and boiled consumption. Knowledge on the quality of raw and boiled Jerusalem artichoke tubers can be used to inform consumers on the right choice of raw material and thereby increase the consumption of the vegetable. © 2012 Society of Chemical Industry.

Efficient Mobility Summit: Transportation and the Future of Dynamic Mobility Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

2015-12-01

On October 27, 2015, The U.S. Department of Energy's National Renewable Energy Laboratory (NREL) brought together local and national thought leaders to discuss the convergence of connectivity, vehicle automation, and transportation infrastructure investments at the Future Energy Efficient Mobility Workshop. The half-day workshop was held in conjunction with the Colorado Department of Transportation's (CDOT) Transportation Matters Summit and featured four panel sessions that showcased perspectives on efficient mobility from federal and state agencies, automakers and their suppliers, transportation data providers, and freight companies. This summary provides highlights from the meeting's exchanges of ideas and existing applications. Transportation's (CDOT) Transportation Mattersmore » Summit and featured four panel sessions that showcased perspectives on efficient mobility from federal and state agencies, automakers and their suppliers, transportation data providers, and freight companies. This summary provides highlights from the meeting's exchanges of ideas and existing applications.« less

High efficiency proportional neutron detector with solid liner internal structures

DOEpatents

Kisner, Roger Allen; Holcomb, David Eugene; Brown, Gilbert M.

2014-08-05

A tube-style neutron detector, a panel-style neutron detector incorporating a plurality of tube-style neutron detectors, and a panel-style neutron detector including a plurality of anode wires are provided. A plurality of channels is provided in a neutron detector such that each channel has an inner surface of a coating layer including a neutron-absorbing material. A wire anode is provided at end of each channel so that electrons generated by a charged daughter particle generated by a neutron are collected to detect a neutron-matter interaction. Moderator units can be incorporated into a neutron detector to provide improved detection efficiencies and/or to determine neutron energy spectrum. Gas-based proportional response from the neutron detectors can be employed for special nuclear material (SNM) detection. This neutron detector can provide similar performance to .sup.3He-based detectors without requiring .sup.3He and without containing toxic, flammable, or high-pressure materials.

Lightweight composites for modular panelized construction

NASA Astrophysics Data System (ADS)

Vaidya, Amol S.

Rapid advances in construction materials technology have enabled civil engineers to achieve impressive gains in the safety, economy, and functionality of structures built to serve the common needs of society. Modular building systems is a fast-growing modern, form of construction gaining recognition for its increased efficiency and ability to apply modern technology to the needs of the market place. In the modular construction technique, a single structural panel can perform a number of functions such as providing thermal insulation, vibration damping, and structural strength. These multifunctional panels can be prefabricated in a manufacturing facility and then transferred to the construction site. A system that uses prefabricated panels for construction is called a "panelized construction system". This study focuses on the development of pre-cast, lightweight, multifunctional sandwich composite panels to be used for panelized construction. Two thermoplastic composite panels are proposed in this study, namely Composite Structural Insulated Panels (CSIPs) for exterior walls, floors and roofs, and Open Core Sandwich composite for multifunctional interior walls of a structure. Special manufacturing techniques are developed for manufacturing these panels. The structural behavior of these panels is analyzed based on various building design codes. Detailed descriptions of the design, cost analysis, manufacturing, finite element modeling and structural testing of these proposed panels are included in this study in the of form five peer-reviewed journal articles. The structural testing of the proposed panels involved in this study included flexural testing, axial compression testing, and low and high velocity impact testing. Based on the current study, the proposed CSIP wall and floor panels were found satisfactory, based on building design codes ASCE-7-05 and ACI-318-05. Joining techniques are proposed in this study for connecting the precast panels on the construction site. Keywords: Modular panelized construction, sandwich composites, composite structural insulated panels (CSIPs).

Determination of the speciation and bioavailability of samarium to Chlamydomonas reinhardtii in the presence of natural organic matter.

PubMed

Rowell, Justine-Anne; Fillion, Marc-Alexandre; Smith, Scott; Wilkinson, Kevin J

2018-06-01

As technological interest and environmental emissions of the rare earth elements increase, it is becoming more important to assess their potential environmental impact. Samarium (Sm) is a lanthanide of intermediate molar mass that is used in numerous high-technology applications including wind turbines, solar panels, and electric vehicles. The present study relates the speciation of Sm determined in the presence of natural organic matter (NOM) to its bioavailability to the unicellular green alga Chlamydomonas reinhardtii. The free ion concentration was determined using a cation exchange resin (ion exchange technique) in dynamic mode and compared with thermodynamic modeling. Short-term biouptake experiments were performed in the presence of 4 types of NOM: Suwannee River fulvic acids, Pahokee Peat fulvic acids, Suwannee River humic acids, and a Luther Marsh dissolved organic matter isolate (90-95% humic acids). It was clearly shown that even a small amount of NOM (0.5 mg C L -1 ) resulted in a significant decrease (10 times) in the Sm internalization fluxes. Furthermore, complexation with humic acids (and the corresponding reduction in Sm bioavailability) was stronger than that with fulvic acids. The results showed that the experimentally measured (free) Sm was a better predictor of Sm internalization than either the total concentrations or the free ion concentrations obtained using thermodynamic modeling. Environ Toxicol Chem 2018;37:1623-1631. © 2018 SETAC. © 2018 SETAC.

Refugee claimant's identity as cross-dresser must be considered in assessing adequacy of state protection.

PubMed

2008-07-01

On 11 December 2007, the Federal Court allowed Jose Hernandez's application for judicial review of a November 2006 decision by the Refugee Protection Division of the Immigration and Refugee Board, which found that the applicant was neither a Convention refugee nor a person in need of protection. Hernandez had requested that the Board's decision be set aside and the matter referred back to a newly constituted panel of the Board for re-determination.

JPRS Report, West Europe.

DTIC Science & Technology

1988-03-04

this point, only one dark spot remains: How and where to find the 3,600 billion lire that must go into the Defense budget for fiscal year 1988. "We... escudo " continues to divide the members of the panel. As a matter of fact, while 21.4 percent mention it as the factor that most positively...Demand ^y Exchange Rate 6^ 28,9% of the Escudo OUTUBRO 87 410/y^i Government’s i!^0 2S𔃽°yL Economic Policy Domestic "S?/^. Demand Cost

COP-compost: a software to study the degradation of organic pollutants in composts.

PubMed

Zhang, Y; Lashermes, G; Houot, S; Zhu, Y-G; Barriuso, E; Garnier, P

2014-02-01

Composting has been demonstrated to be effective in degrading organic pollutants (OP) whose behaviour depends on the composting conditions, the microbial populations activated and interactions with organic matters. The fate of OP during composting involves complex mechanisms and models can be helpful tools for educational and scientific purposes, as well as for industrialists who want to optimise the composting process for OP elimination. A COP-Compost model, which couples an organic carbon (OC) module and an organic pollutant (OP) module and which simulates the changes of organic matter, organic pollutants and the microbial activities during the composting process, has been proposed and calibrated for a first set of OP in a previous study. The objectives of the present work were (1) to introduce the COP-Compost model from its convenient interface to a potential panel of users, (2) to show the variety of OP that could be simulated, including the possibility of choosing between degradation through co-metabolism or specific metabolism and (3) to show the effect of the initial characteristics of organic matter quality and its microbial biomass on the simulated results of the OP dynamic. In the model, we assumed that the pollutants can be adsorbed on organic matter according to the biochemical quality of the OC and that the microorganisms can degrade the pollutants at the same time as they degrade OC (by co-metabolism). A composting experiment describing two different (14)C-labelled organic pollutants, simazine and pyrene, were chosen from the literature because the four OP fractions simulated in the model were measured during the study (the mineralised, soluble, sorbed and non-extractable fractions). Except for the mineralised fraction of simazine, a good agreement was achieved between the simulated and experimental results describing the evolution of the different organic fractions. For simazine, a specific biomass had to be added. To assess the relative importance of organic matter dynamics on the organic pollutants' behaviour, a sensitivity analysis was conducted. The sensitivity analysis demonstrated that the parameters associated with organic matter dynamics and its initial microbial biomass greatly influenced the evolution of all the OP fractions, although the initial biochemical quality of the OC did not have a significant impact on the OP evolution.

The Influence of Stressor Exposure and Psychosocial Resources on the Age-Anger Relationship.

PubMed

Brown, Robyn Lewis

2016-12-01

This study examined the processes linking age, stressor exposure, psychosocial coping resources, and two dimensions of anger proneness (i.e., experienced anger and expressed anger). Longitudinal change regression analysis of data from a two-wave community panel study including a sample of people aged 18 to 93 ( N = 1,473) is performed. Age is significantly associated with declines in both experienced anger and expressed anger over the 3-year study period. These associations are substantially mediated by the lower levels of chronic stressors and discrimination-related stressors experienced among older adults. In contrast, self-esteem amplifies the association between age and expressed anger. These findings clarify the circumstances in which age matters most for changes over time in the experience and expression of anger. They highlight how certain forms of stressor exposure and psychosocial resources are linked with anger proneness and in ways that vary by age.

[The short-term effects of particulate matter on lung function of college students in autumn and winter in Wuhan].

PubMed

Li, Jiao-yuan; Ma, Lu; Liu, Li-zhi; Zhou, Jie; He, Ming-quan; Shima, Masayuki; Tamura, Kenji

2013-02-01

To evaluate the effects of indoor and outdoor PM2.5 (fine particulate matter, particulate matter with an aerodynamic diameter ≤ 2.5 µm) on lung function of college students in autumn and winter in Wuhan. In this panel study, 37 college students (excluded subject of respiratory disease and smoking history) aged 19 - 21 were investigated by cluster sampling in a university in Wuhan. The follow-up study lasted for 28 days in total, including two study periods, Oct. 29 to Nov. 11, 2009 (autumn) and Dec. 23, 2009 to Jan.5, 2010 (winter), the peak expiratory flow (PEF) of the college students were measured daily in the morning and evening in the university. PM10 and PM2.5 were monitored indoors and outdoors. The effects of PM on lung function of college students were analyzed by using generalized estimating equation (GEE). Average daily concentrations of indoor, outdoor PM2.5 in autumn were (91.3 ± 43.7) and (104.2 ± 49.4) µg/m(3) respectively, while in winter the concentrations of indoor and outdoor PM2.5 were (110.6 ± 42.3) and (143.5 ± 51.2) µg/m(3). The single pollutant model showed that in winter, the evening PEF decrement was significantly associated with increasing outdoor PM2.5. With an increase of 10 µg/m(3) outdoor PM2.5, the PEF measured in the evening decreased 1.27 L/min (95%CI: 0.02 - 2.52 L/min, respectively). Meanwhile, the results showed that 2-days lagged outdoor PM2.5 was also significantly associated with morning PEF. An increase of 10 µg/m(3) 2-days lagged outdoor PM2.5 caused the decrease of 1.82 L/min (95%CI: -3.53 - -0.11 L/min) of PEF measured in the morning. Controlling the influence of gaseous pollutants and building the two pollutants models, the results indicated that no significant changes of PEF of students being exposed to PM2.5 on same day (lag 0) were observed. However, under consideration of SO2 effect, significant association between an increase of 10 µg/m(3) 2-days lagged outdoor PM2.5 and changes of morning PEF (-1.81 L/min, 95%CI: -3.51 - -0.11 L/min, P = 0.037) was found. The relationship between changes of concentrations and PEF was not observed in autumn in this study. In our panel study, exposure to outdoor PM2.5 is significantly associated with PEF among college students in winter, but not in autumn.

Association of Short-Term Exposure to Ambient Fine Particulate Matter with Skin Symptoms in Schoolchildren: A Panel Study in a Rural Area of Western Japan.

PubMed

Watanabe, Masanari; Noma, Hisashi; Kurai, Jun; Sano, Hiroyuki; Iwata, Kyoko; Hantan, Degejirihu; Tohda, Yuji; Shimizu, Eiji

2017-03-13

Numerous studies have unmasked the deleterious effects of particulate matter less than 2.5 μm (PM 2.5 ) on health. However, epidemiologic evidence focusing on the effects of PM 2.5 on skin health remains limited. An important aspect of Asian dust (AD) in relationship to health is the amount of PM 2.5 contained therein. Several studies have demonstrated that AD can aggravate skin symptoms. The current study aimed to investigate the effects of short-term exposure to PM 2.5 and AD particles on skin symptoms in schoolchildren. A total of 339 children recorded daily skin symptom scores during February 2015. Light detection and ranging were used to calculate AD particle size. Generalized estimating equation logistic regression analyses were used to estimate the associations among skin symptoms and the daily levels of PM 2.5 and AD particles. Increases in the levels of PM 2.5 and AD particles were not related to an increased risk of skin symptom events, with increases of 10.1 μg/m³ in PM 2.5 and 0.01 km -1 in AD particles changing odds ratios by 1.03 and 0.99, respectively. These results suggest that short-term exposure to PM 2.5 and AD does not impact skin symptoms in schoolchildren.

Predicting Consumer Effort in Finding and Paying for Health Care: Expert Interviews and Claims Data Analysis.

PubMed

Long, Sandra; Monsen, Karen A; Pieczkiewicz, David; Wolfson, Julian; Khairat, Saif

2017-10-12

For consumers to accept and use a health care information system, it must be easy to use, and the consumer must perceive it as being free from effort. Finding health care providers and paying for care are tasks that must be done to access treatment. These tasks require effort on the part of the consumer and can be frustrating when the goal of the consumer is primarily to receive treatments for better health. The aim of this study was to determine the factors that result in consumer effort when finding accessible health care. Having an understanding of these factors will help define requirements when designing health information systems. A panel of 12 subject matter experts was consulted and the data from 60 million medical claims were used to determine the factors contributing to effort. Approximately 60 million claims were processed by the health care insurance organization in a 12-month duration with the population defined. Over 292 million diagnoses from claims were used to validate the panel input. The results of the study showed that the number of people in the consumer's household, number of visits to providers outside the consumer's insurance network, number of adjusted and denied medical claims, and number of consumer inquiries are a proxy for the level of effort in finding and paying for care. The effort level, so measured and weighted per expert panel recommendations, differed by diagnosis. This study provides an understanding of how consumers must put forth effort when engaging with a health care system to access care. For higher satisfaction and acceptance results, health care payers ideally will design and develop systems that facilitate an understanding of how to avoid denied claims, educate on the payment of claims to avoid adjustments, and quickly find providers of affordable care. ©Sandra Long, Karen A. Monsen, David Pieczkiewicz, Julian Wolfson, Saif Khairat. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 12.10.2017.

Poverty dynamics in Germany: Evidence on the relationship between persistent poverty and health behavior.

PubMed

Aue, Katja; Roosen, Jutta; Jensen, Helen H

2016-03-01

Previous studies have found poverty to be related to lower levels of health due to poor health behavior such as unhealthy eating, smoking or less physical activity. Longer periods of poverty seem to be especially harmful for individual health behavior. Studies have shown that poverty has a dynamic character. Moreover, poverty is increasingly regarded as being a multidimensional construct and one that considers more aspects than income alone. Against this background this paper analyzes the relationship between health behavior and persistent spells of income poverty as well as a combined poverty indicator using data of the German Socio-Economic Panel (2000-2010). Next to cross-sectional logistic regression models we estimate fixed-effects models to analyze the effect of persistent poverty on dietary behavior, tobacco consumption, and physical activity. Cross-sectional results suggest that persistent poverty is related to poor health behavior, particularly regarding tobacco consumption and physical activity. Results also show that multidimensional and dynamic aspects of poverty matter. Complementary panel analyses reveal negative effects for the combined poverty indicator only for dietary behavior in the total sample. However, by analyzing the sample by gender we identify further effects of persistent poverty on health behavior. The analyses show that not only do individuals in poverty but also those in precarious situations show health-damaging behavior more often. Copyright © 2016 Elsevier Ltd. All rights reserved.

Impact-damaged graphite-thermoplastic trapezoidal-corrugation sandwich and semi-sandwich panels

NASA Technical Reports Server (NTRS)

Jegley, D.

1993-01-01

The results of a study of the effects of impact damage on compression-loaded trapezoidal-corrugation sandwich and semi-sandwich graphite-thermoplastic panels are presented. Sandwich panels with two identical face sheets and a trapezoidal corrugated core between them, and semi-sandwich panels with a corrugation attached to a single skin are considered in this study. Panels were designed, fabricated and tested. The panels were made using the manufacturing process of thermoforming, a less-commonly used technique for fabricating composite parts. Experimental results for unimpacted control panels and panels subjected to impact damage prior to loading are presented. Little work can be found in the literature about these configurations of thermoformed panels.

Exploratory sensory profiling of three culinary preparations of potatoes (Solanum tuberosum L.).

PubMed

Seefeldt, Helene F; Tønning, Erik; Thybo, Anette K

2011-01-15

A consumer-oriented description of potato quality with regard to culinary preparation could increase potato consumption. The aim of this study was to investigate the sensory attributes in 11 potato varieties grown at two locations and used for three culinary preparations. Sensory evaluation of the potatoes served either as boiled, oven-fried or mashed were performed using 15-19 descriptors for appearance, flavour and texture attributes. A principal component analysis revealed that 45% of the variation in the sensory data was related to variety differences, which was ascribed to variation in appearance, dry matter content and texture. Growing location also significantly affected appearance and texture. The sensory panel judged the sensory attributes 'yellowness', 'hardness', 'adhesiveness' and 'moistness' to be important quality descriptors in all three culinary preparations. Internal references showed the high reproducibility of the sensory evaluations. The potatoes grown in a sandy location had higher content of dry matter compared to those grown in a clay location, affecting the quality. This study showed that it was possible to do reliable and reproducible sensory profiles in a potato material with a large span in quality. Sensory information based on few attributes can be used to describe culinary quality of potato varieties. Copyright © 2010 Society of Chemical Industry.

Performance comparison of flat static and adjustable angle solar panels for sunny weather

NASA Astrophysics Data System (ADS)

Chua, Yaw Long; Yong, Yoon Kuang

2017-04-01

Nowadays solar panels are commonly used to collect sunlight so that it could convert solar energy into electrical energy. The power generated by the solar panels depends on the amount of sunlight collected on the solar panels. This paper presents a study that was carried out to study how changing the angle of the solar panels will impact the amount of electrical energy collected after conversion and the efficiencies of the solar panels. In this paper, the solar panels were placed at 30°, 35° and 40° angles throughout different days. The energy collected is then compared with energy collected by a flat static solar panel. It turns out that the solar panels with 40° angle performed best among the other angle solar panels.

Investigation of Chinese text entry performance for mobile display interfaces.

PubMed

Lin, Po-Hung

2015-01-01

This study examined the effects of panel type, frequency of use and arrangement of phonetic symbols on operation time, usability, visual fatigue and workload in text entry performance. Three types of panel (solid, touch and mixed), three types of frequency of use (low, medium and high) and two types of the arrangement of phonetic symbols (vertical and horizontal) were investigated through 30 college students in the experiment. The results indicated that panel type, frequency of use, arrangement of phonetic symbols and the interaction between panel type and frequency of use were significant factors on operation time. Panel type was also a significant factor on usability, and a touch panel and a solid panel showed better usability than a mixed panel. Furthermore, a touch panel showed good usability and the lowest workload and therefore it is recommended to use a touch panel with vertical phonetic arrangement in sending Chinese text messages. Practitioner Summary: This study found, from ergonomics considerations, that a touch panel showed good usability and it is recommended to use a touch panel with vertical phonetic arrangement in sending Chinese text messages. Mobile display manufacturers can use the results of this study as a reference for future keyboard design.

Use of Internet panels to conduct surveys.

PubMed

Hays, Ron D; Liu, Honghu; Kapteyn, Arie

2015-09-01

The use of Internet panels to collect survey data is increasing because it is cost-effective, enables access to large and diverse samples quickly, takes less time than traditional methods to obtain data for analysis, and the standardization of the data collection process makes studies easy to replicate. A variety of probability-based panels have been created, including Telepanel/CentERpanel, Knowledge Networks (now GFK KnowledgePanel), the American Life Panel, the Longitudinal Internet Studies for the Social Sciences panel, and the Understanding America Study panel. Despite the advantage of having a known denominator (sampling frame), the probability-based Internet panels often have low recruitment participation rates, and some have argued that there is little practical difference between opting out of a probability sample and opting into a nonprobability (convenience) Internet panel. This article provides an overview of both probability-based and convenience panels, discussing potential benefits and cautions for each method, and summarizing the approaches used to weight panel respondents in order to better represent the underlying population. Challenges of using Internet panel data are discussed, including false answers, careless responses, giving the same answer repeatedly, getting multiple surveys from the same respondent, and panelists being members of multiple panels. More is to be learned about Internet panels generally and about Web-based data collection, as well as how to evaluate data collected using mobile devices and social-media platforms.

Methodological approach to moving nutritional science evidence into practice.

PubMed

Crawford, Cindy; Teo, Lynn; Elfenbaum, Pamela; Enslein, Viviane; Deuster, Patricia A; Berry, Kevin

2017-06-01

The Metabolically Optimized Brain study explored nutritional science believed to be ready to place into practice to help improve US service members' cognitive performance and, thereby, optimize mission-readiness. A transparent, step-wise, research approach was used for informing evidence-based decisions among and for various, diverse stakeholders. A steering committee and subject-matter experts convened to devise the protocol and independent systematic reviews were performed to determine the quality of the evidence for nutritional science in 4 areas relevant to military populations: (1) caffeinated foods and beverages; (2) omega-3 polyunsaturated fatty acids; (3) plant-based foods and beverages or their phytochemical constituents; and (4) whole dietary patterns. A research expert panel was asked to then recommend future research directions and solutions likely to benefit warfighters. An implementation expert panel further considered how to apply sound nutritional science in a cost-effective manner. This article summarizes the methodological processes, high-level results, global research recommendations, and priorities for implementation. Specific results of the individual dietary interventions, as well as recommendations for moving this field of research and practice forward, are detailed throughout the current supplement. © The Author(s) 2017. Published by Oxford University Press on behalf of the International Life Sciences Institute. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Assessing Teachers' Comprehension of What Matters in Earth Science

NASA Astrophysics Data System (ADS)

Penuel, W. R.; Kreikemeier, P.; Venezky, D.; Blank, J. G.; Davatzes, A.; Davatzes, N.

2006-12-01

Curricular standards developed for individual U.S. States tell teachers what they should teach. Most sets of standards are too numerous to be taught in a single year, forcing teachers to make decisions about what to emphasize in their curriculum. Ideally, such decisions would be based on what matters most in Earth science, namely, the big ideas that anchor scientific inquiry in the field. A measure of teachers' ability to associate curriculum standards with fundamental concepts in Earth science would help K-12 program and curriculum developers to bridge gaps in teachers' knowledge in order to help teachers make better decisions about what is most important to teach and communicate big ideas to students. This paper presents preliminary results of an attempt to create and validate a measure of teachers' comprehension of what matters in three sub-disciplines of Earth science. This measure was created as part of an experimental study of teacher professional development in Earth science. It is a task that requires teachers to take their state's curriculum standards and identify which standards are necessary or supplemental to developing students' understanding of fundamental concepts in the target sub-disciplines. To develop the task, a team of assessment experts and educational researchers asked a panel of four Earth scientists to identify key concepts embedded within middle school standards for the state of Florida. The Earth science panel reached a consensus on which standards needed to be taught in order to develop understanding of those concepts; this was used as a basis for comparison with teacher responses. Preliminary analysis of the responses of 44 teachers who participated in a pilot validation study identified differences between teachers' and scientists' maps of standards to big ideas in the sub-disciplines. On average, teachers identified just under one-third of the connections seen by expert Earth scientists between the concepts and their state standards. Teachers with higher levels of agreement also had a higher percentage of standards identified that were "off-grade," meaning that they saw connections to standards that they were not themselves required to teach but that nonetheless were relevant to developing student understanding of a particular concept. This result is consistent with the premise that to make good decisions about what to teach, teachers need to be able to identify relevant standards from other grade levels that are connected to the big ideas of a discipline (Shulman, 1986, Educ. Res. 15:4-14).

Muon detector for the COSINE-100 experiment

NASA Astrophysics Data System (ADS)

Prihtiadi, H.; Adhikari, G.; Adhikari, P.; Barbosa de Souza, E.; Carlin, N.; Choi, S.; Choi, W. Q.; Djamal, M.; Ezeribe, A. C.; Ha, C.; Hahn, I. S.; Hubbard, A. J. F.; Jeon, E. J.; Jo, J. H.; Joo, H. W.; Kang, W.; Kang, W. G.; Kauer, M.; Kim, B. H.; Kim, H.; Kim, H. J.; Kim, K. W.; Kim, N. Y.; Kim, S. K.; Kim, Y. D.; Kim, Y. H.; Kudryavtsev, V. A.; Lee, H. S.; Lee, J.; Lee, J. Y.; Lee, M. H.; Leonard, D. S.; Lim, K. E.; Lynch, W. A.; Maruyama, R. H.; Mouton, F.; Olsen, S. L.; Park, H. K.; Park, H. S.; Park, J. S.; Park, K. S.; Pettus, W.; Pierpoint, Z. P.; Ra, S.; Rogers, F. R.; Rott, C.; Scarff, A.; Spooner, N. J. C.; Thompson, W. G.; Yang, L.; Yong, S. H.

2018-02-01

The COSINE-100 dark matter search experiment has started taking physics data with the goal of performing an independent measurement of the annual modulation signal observed by DAMA/LIBRA. A muon detector was constructed by using plastic scintillator panels in the outermost layer of the shield surrounding the COSINE-100 detector. It detects cosmic ray muons in order to understand the impact of the muon annual modulation on dark matter analysis. Assembly and initial performance tests of each module have been performed at a ground laboratory. The installation of the detector in the Yangyang Underground Laboratory (Y2L) was completed in the summer of 2016. Using three months of data, the muon underground flux was measured to be 328 ± 1(stat.)± 10(syst.) muons/m2/day. In this report, the assembly of the muon detector and the results from the analysis are presented.

Analysis of Particulate and Fiber Debris Samples Returned from the International Space Station

NASA Technical Reports Server (NTRS)

Perry, Jay L.; Coston, James E.

2014-01-01

During the period of International Space Station (ISS) Increments 30 and 31, crewmember reports cited differences in the cabin environment relating to particulate matter and fiber debris compared to earlier experience as well as allergic responses to the cabin environment. It was hypothesized that a change in the cabin atmosphere's suspended particulate matter load may be responsible for the reported situation. Samples were collected and returned to ground-based laboratories for assessment. Assessments included physical classification, optical microscopy and photographic analysis, and scanning electron microscopy (SEM) evaluation using energy dispersive X-ray spectrometry (EDS) methods. Particular points of interest for assessing the samples were for the presence of allergens, carbon dioxide removal assembly (CDRA) zeolite dust, and FGB panel fibers. The results from the physical classification, optical microscopy and photographic analysis, and SEM EDS analysis are presented and discussed.

Circulating adhesion molecules after short-term exposure to particulate matter among welders.

PubMed

Fang, S C; Eisen, E A; Cavallari, J M; Mittleman, M A; Christiani, D C

2010-01-01

Studies from several countries indicate that welders experience increased risk of mortality and morbidity from ischaemic heart disease. Although the underlying mechanisms are unclear, vascular responses to particulate matter contained in welding fumes may play a role. To investigate this, we studied the acute effects of welding fume exposure on the endothelial component of vascular function, as measured by circulating adhesion molecules involved in leukocyte adhesion (sICAM-1 and sVCAM-1) and coagulation (vWF). A panel of 26 male welders was studied repeatedly across a 6 h work-shift on a high exposure welding day and/or a low exposure non-welding day. Personal PM(2.5) exposure was measured throughout the work-shift. Blood samples were collected in the morning (baseline) prior to the exposure period, immediately after the exposure period, and the following morning. To account for the repeated measurements, we used linear mixed models to evaluate the effects of welding (binary) and PM(2.5) (continuous) exposure on each blood marker, adjusting for baseline blood marker concentration, smoking, age and time of day. Welding and PM(2.5) exposure were significantly associated with a decrease in sVCAM-1 in the afternoon and the following morning and an increase in vWF in the afternoon. The data suggest that welding and short-term occupational exposure to PM(2.5) may acutely affect the endothelial component of vascular function.

Energy consumption habits and human health nexus in Sub-Saharan Africa.

PubMed

Hanif, Imran

2018-05-22

This study explores the impact of fossil fuels consumption, solid fuels consumption for cooking purposes, economic growth, and carbon emissions on human health, with a key emphasis on the occurrence of tuberculosis and the high mortality rate in Sub-Saharan Africa. For its practical insights, the study develops a system Generalized Method of Moment (GMM) for a panel of 34 middle- and lower-middle-income countries from 1995 to 2015. The study adopts a flexible methodology to tackle endogeneity in the variables. The robust results report that the use of solid fuels (charcoal, peat, wood, wood pellets, crop residues) for cooking purposes and the consumption of fossil fuels (oil, coal, gas) are significantly increasing the occurrence of tuberculosis. In addition, the results highlight that the consumption of both solid fuels and fossil fuels has adverse affects on life expectancy by increasing the mortality rate in Sub-Saharan African countries. Results report that renewable energy sources like sun, wind, and water (all with potential to prevent households from direct exposure to particulate matters and harmful gases) as well as a rise in economic growth serve as helping factors to control the occurrence of tuberculosis and to decrease the mortality rate. Moreover, the use of renewable energy sources is serving to lessen emissions of carbon dioxide, nitrogen dioxides, and particulate matters, which can ultimately decrease the mortality rate and extend the life expectancy in Sub-Saharan Africa.

Regional variations in the health, environmental, and climate benefits of wind and solar generation

PubMed Central

Siler-Evans, Kyle; Azevedo, Inês Lima; Morgan, M. Granger; Apt, Jay

2013-01-01

When wind or solar energy displace conventional generation, the reduction in emissions varies dramatically across the United States. Although the Southwest has the greatest solar resource, a solar panel in New Jersey displaces significantly more sulfur dioxide, nitrogen oxides, and particulate matter than a panel in Arizona, resulting in 15 times more health and environmental benefits. A wind turbine in West Virginia displaces twice as much carbon dioxide as the same turbine in California. Depending on location, we estimate that the combined health, environmental, and climate benefits from wind or solar range from $10/MWh to $100/MWh, and the sites with the highest energy output do not yield the greatest social benefits in many cases. We estimate that the social benefits from existing wind farms are roughly 60% higher than the cost of the Production Tax Credit, an important federal subsidy for wind energy. However, that same investment could achieve greater health, environmental, and climate benefits if it were differentiated by region. PMID:23798431

Regional variations in the health, environmental, and climate benefits of wind and solar generation.

PubMed

Siler-Evans, Kyle; Azevedo, Inês Lima; Morgan, M Granger; Apt, Jay

2013-07-16

When wind or solar energy displace conventional generation, the reduction in emissions varies dramatically across the United States. Although the Southwest has the greatest solar resource, a solar panel in New Jersey displaces significantly more sulfur dioxide, nitrogen oxides, and particulate matter than a panel in Arizona, resulting in 15 times more health and environmental benefits. A wind turbine in West Virginia displaces twice as much carbon dioxide as the same turbine in California. Depending on location, we estimate that the combined health, environmental, and climate benefits from wind or solar range from $10/MWh to $100/MWh, and the sites with the highest energy output do not yield the greatest social benefits in many cases. We estimate that the social benefits from existing wind farms are roughly 60% higher than the cost of the Production Tax Credit, an important federal subsidy for wind energy. However, that same investment could achieve greater health, environmental, and climate benefits if it were differentiated by region.

The development of spinal cord anatomy.

PubMed

Pearce, J M S

2008-01-01

A panel illustrating spinal cord injury in The Dying Lioness in the British Museum dates to 650 BC. This paper outlines the subsequent progression of knowledge of the anatomy of the spinal cord. The animal dissections of Galen are considered because his deductions persisted through the Dark Ages until the late 18th century. Anatomy advanced gradually to yield discoveries of the complex tracts and grey matter elements of the cord and their functions. Amongst many distinguished exponents, the works of Blasius, Huber, Vicq d'Azyr and Stilling are emphasised. (c) 2008 S. Karger AG, Basel

75 FR 39212 - Establishment of Department of Defense Federal Advisory Committee; Independent Panel Review of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-08

... of the Navy. The Panel shall: a. Carry out a study of the policies and management and organizational... to fulfill the legal mission of the Department of the Navy. b. In carrying out the study, the Panel... purposes of the study. In carrying out its study the Panel may review, and incorporate as appropriate, the...

Developmental Patterns in Marital Satisfaction: Another Look at Covenant Marriage

PubMed Central

DeMaris, Alfred; Sanchez, Laura A.; Krivickas, Kristi

2012-01-01

This study investigated differences in the trajectory of marital satisfaction in the first seven years between couples in covenant vs. standard marriages. Data on 707 Louisiana marriages from the Marriage Matters Panel Survey of Newlywed Couples, 1998 – 2004, were analyzed using multivariate longitudinal growth modeling. Restricting the sample to couples who remained married over the duration of the study, a marginal benefit of covenant status was found for husbands. This effect was largely accounted for by covenant husbands’ more extensive exposure to premarital counseling. The linear decline in marital satisfaction over time that obtained for both husbands and wives was not, however, any different for covenants vs. standards. Couples characterized by more traditional attitudes toward gender roles were significantly less satisfied than others. High premarital risk factors, initial uncertainty about marrying the spouse, and the presence of preschool children in the household were all corrosive of marital satisfaction at any given time. PMID:23144502

Developmental Patterns in Marital Satisfaction: Another Look at Covenant Marriage.

PubMed

Demaris, Alfred; Sanchez, Laura A; Krivickas, Kristi

2012-10-01

This study investigated differences in the trajectory of marital satisfaction in the first seven years between couples in covenant vs. standard marriages. Data on 707 Louisiana marriages from the Marriage Matters Panel Survey of Newlywed Couples, 1998 - 2004, were analyzed using multivariate longitudinal growth modeling. Restricting the sample to couples who remained married over the duration of the study, a marginal benefit of covenant status was found for husbands. This effect was largely accounted for by covenant husbands' more extensive exposure to premarital counseling. The linear decline in marital satisfaction over time that obtained for both husbands and wives was not, however, any different for covenants vs. standards. Couples characterized by more traditional attitudes toward gender roles were significantly less satisfied than others. High premarital risk factors, initial uncertainty about marrying the spouse, and the presence of preschool children in the household were all corrosive of marital satisfaction at any given time.

Response of Composite Fuselage Sandwich Side Panels Subjected to Internal Pressure and Axial Tension

NASA Technical Reports Server (NTRS)

Rouse, Marshall; Ambur, Damodar R.; Dopker, Bernard; Shah, Bharat

1998-01-01

The results from an experimental and analytical study of two composite sandwich fuselage side panels for a transport aircraft are presented. Each panel has two window cutouts and three frames and utilizes a distinctly different structural concept. These panels have been evaluated with internal pressure loads that generate biaxial tension loading conditions. Design limit load and design ultimate load tests have been performed on both panels. One of the sandwich panels was tested with the middle frame removed to demonstrate the suitability of this two-frame design for supporting the prescribed biaxial loading conditions with twice the initial frame spacing of 20 inches. A damage tolerance study was conducted on the two-frame panel by cutting a notch in the panel that originates at the edge of a cutout and extends in the panel hoop direction through the window-belt area. This panel with a notch was tested in a combined-load condition to demonstrate the structural damage tolerance at the design limit load condition. Both the sandwich panel designs successfully satisfied all desired load requirements in the experimental part of the study, and experimental results from the two-frame panel with and without damage are fully explained by the analytical results. The results of this study suggest that there is potential for using sandwich structural concepts with greater than the usual 20-in. wide frame spacing to further reduce aircraft fuselage structural weight.

Inclusion of Population-specific Reference Panel from India to the 1000 Genomes Phase 3 Panel Improves Imputation Accuracy.

PubMed

Ahmad, Meraj; Sinha, Anubhav; Ghosh, Sreya; Kumar, Vikrant; Davila, Sonia; Yajnik, Chittaranjan S; Chandak, Giriraj R

2017-07-27

Imputation is a computational method based on the principle of haplotype sharing allowing enrichment of genome-wide association study datasets. It depends on the haplotype structure of the population and density of the genotype data. The 1000 Genomes Project led to the generation of imputation reference panels which have been used globally. However, recent studies have shown that population-specific panels provide better enrichment of genome-wide variants. We compared the imputation accuracy using 1000 Genomes phase 3 reference panel and a panel generated from genome-wide data on 407 individuals from Western India (WIP). The concordance of imputed variants was cross-checked with next-generation re-sequencing data on a subset of genomic regions. Further, using the genome-wide data from 1880 individuals, we demonstrate that WIP works better than the 1000 Genomes phase 3 panel and when merged with it, significantly improves the imputation accuracy throughout the minor allele frequency range. We also show that imputation using only South Asian component of the 1000 Genomes phase 3 panel works as good as the merged panel, making it computationally less intensive job. Thus, our study stresses that imputation accuracy using 1000 Genomes phase 3 panel can be further improved by including population-specific reference panels from South Asia.

Modeling individual exposures to ambient PM2.5 in the diabetes and the environment panel study (DEPS).

PubMed

Breen, Michael; Xu, Yadong; Schneider, Alexandra; Williams, Ronald; Devlin, Robert

2018-06-01

Air pollution epidemiology studies of ambient fine particulate matter (PM 2.5 ) often use outdoor concentrations as exposure surrogates, which can induce exposure error. The goal of this study was to improve ambient PM 2.5 exposure assessments for a repeated measurements study with 22 diabetic individuals in central North Carolina called the Diabetes and Environment Panel Study (DEPS) by applying the Exposure Model for Individuals (EMI), which predicts five tiers of individual-level exposure metrics for ambient PM 2.5 using outdoor concentrations, questionnaires, weather, and time-location information. Using EMI, we linked a mechanistic air exchange rate (AER) model to a mass-balance PM 2.5 infiltration model to predict residential AER (Tier 1), infiltration factors (F inf_home , Tier 2), indoor concentrations (C in , Tier 3), personal exposure factors (F pex , Tier 4), and personal exposures (E, Tier 5) for ambient PM 2.5 . We applied EMI to predict daily PM 2.5 exposure metrics (Tiers 1-5) for 174 participant-days across the 13 months of DEPS. Individual model predictions were compared to a subset of daily measurements of F pex and E (Tiers 4-5) from the DEPS participants. Model-predicted F pex and E corresponded well to daily measurements with a median difference of 14% and 23%; respectively. Daily model predictions for all 174 days showed considerable temporal and house-to-house variability of AER, F inf_home , and C in (Tiers 1-3), and person-to-person variability of F pex and E (Tiers 4-5). Our study demonstrates the capability of predicting individual-level ambient PM 2.5 exposure metrics for an epidemiological study, in support of improving risk estimation. Copyright © 2018. Published by Elsevier B.V.

Chemical constituents of fine particulate air pollution and pulmonary function in healthy adults: the Healthy Volunteer Natural Relocation study.

PubMed

Wu, Shaowei; Deng, Furong; Hao, Yu; Shima, Masayuki; Wang, Xin; Zheng, Chanjuan; Wei, Hongying; Lv, Haibo; Lu, Xiuling; Huang, Jing; Qin, Yu; Guo, Xinbiao

2013-09-15

The study examined the associations of 32 chemical constituents of particulate matter with an aerodynamic diameter ≤2.5 μm (PM₂.₅) with pulmonary function in a panel of 21 college students. Study subjects relocated from a suburban area to an urban area with changing ambient air pollution levels and contents in Beijing, China, and provided daily morning/evening peak expiratory flow (PEF) and forced expiratory volume in 1s (FEV₂₁) measurements over 6 months in three study periods. There were significant reductions in evening PEF and morning/evening FEV₂₁ associated with various air pollutants and PM₂.₅ constituents. Four PM₂.₅ constituents (copper, cadmium, arsenic and stannum) were found to be most consistently associated with the reductions in these pulmonary function measures. These findings provide clues for the respiratory effects of specific particulate chemical constituents in the context of urban air pollution. Copyright © 2013 Elsevier B.V. All rights reserved.

Is the Moderating Effect of Social Support on New Korean Mothers' Psychological Distress Contingent on Levels of Marital Quality?

PubMed

Park, Ki Tae

2018-03-01

This study examines how levels of marital quality change the effect of social support on postpartum psychological distress among new Korean mothers using the Panel Study on Korean Children (N = 1585). In accord with findings from previous studies, this study shows that low marital quality negatively affects new mothers' mental health, but that social support alleviates psychological distress independent of marital quality. The main finding of this research is that the moderating effect of social support is contingent on levels of marital quality. Aggregated social support moderates the effects of marital quality on new mothers' mental health only when the level of marital quality is low. Furthermore, each dimension of social support (emotional, informational, and instrumental) only has a moderating effect when marital quality is low. The findings highlight the fact that the moderating effect of social support varies with the individual context and so customized social support that fits individual needs matters for the mental health of new mothers.

Rural Panel Surveys in Developing Countries: A Selective Review

PubMed Central

Hao, Lingxin; Wang, Weidong; Xie, Guihua

2017-01-01

Rural panel surveys are the most appropriate means to provide data for studying the unprecedented rapid migration and urbanization currently taking place in China and other developing countries. To maximize heterogeneity in urbanization and development over the last three decades, we selected rural panel surveys from five Asian countries, including India, Indonesia, Nepal, Thailand, and China. This paper provides a selective review, focusing on their panel survey methodology, which is organized based on our proposed four basics of panel surveys – representativeness, retrospect-prospect, multilevel tracking, and temporality. We analyzed the strengths and weaknesses of the selected panel surveys to provide directions for designing future rural panel studies in China and elsewhere in the developing world. PMID:29201494

Lightweight panel study 2012: Perceptions and usage by North American wood products manufacturers

Treesearch

Urs Buehlmann; Matt Bumgardner; Karl D. Forth

2012-01-01

Lightweight panels (panels made of two thin panels on the outside and a lightweight material in the core) can offer enhanced performance, reduced material use, and new design opportunities over traditional types of panels. Opportunities exist for the adoption of lightweight panels by the secondary wood industry in North America, as 62 percent of respondents to a recent...

Variable interpretation of ultrasonograms may contribute to variation in the reported incidence of white matter damage between newborn intensive care units in New Zealand

PubMed Central

Harris, D L; Bloomfield, F H; Teele, R L; Harding, J E

2006-01-01

Background The incidence of cerebral white matter damage reported to the Australian and New Zealand Neonatal Network (ANZNN) varies between neonatal intensive care units (NICUs). Hypothesis Differences in the capture, storage, and interpretation of the cerebral ultrasound scans could account for some of this variation. Methods A total of 255 infants of birth weight <1500 g and gestation <32 weeks born between 1997 and 2002 and drawn equally from each of the six NICUs in New Zealand were randomly selected from the ANZNN database. Half had early cerebral ultrasound scans previously reported to ANZNN as normal, and half had scans reported as abnormal. The original scans were copied, anonymised, and independently read by a panel of three experts using a standardised method of reviewing and reporting. Results There was considerable variation between NICUs in methods of image capture, quality, and completeness of the scans. There was only moderate agreement between the reviewers' reports and the original reports to the ANZNN (κ 0.45–0.51) and between the reviewers (κ 0.54–0.64). The reviewers reported three to six times more white matter damage than had been reported to the ANZNN. Conclusion Some of the reported variation in white matter damage between NICUs may be due to differences in capture and interpretation of cerebral ultrasound scans. PMID:16159954

Future Defence Budget Constraints: Challenges and Opportunities (Contraintes futures sur les budgets de defense: Defis et opportunites)

DTIC Science & Technology

2016-12-01

collaborative effort is addressed by six Technical Panels who manage a wide range of scientific research activities, a Group specialising in modelling and...HFM Human Factors and Medicine Panel • IST Information Systems Technology Panel • NMSG NATO Modelling and Simulation Group • SAS System Analysis...and Studies Panel • SCI Systems Concepts and Integration Panel • SET Sensors and Electronics Technology Panel These Panels and Group are the

United States Metric Board. A Study of Metric Measurement and Legislation. Volume 1.

DTIC Science & Technology

1979-09-10

LEGAL ADVISORY PANEL A. Panel Membership VIII.I B. Role of the Panel VIII.2 IX. DATA COLLECTION METHODOLOGY A. Basic Research IX.I B. Computer...First, the Panel was involved in a review of the overall study design . Second, the Panel reviewed the various change mechanisms which were identified...collection methodology . • X summarizes the relevant experiences of Canada and Australia. MIOOLEBNX *NEARC CRNTE 1.3 II. THE UNITED STATES METRIC

Active control of turbulent boundary layer-induced sound transmission through the cavity-backed double panels

NASA Astrophysics Data System (ADS)

Caiazzo, A.; Alujević, N.; Pluymers, B.; Desmet, W.

2018-05-01

This paper presents a theoretical study of active control of turbulent boundary layer (TBL) induced sound transmission through the cavity-backed double panels. The aerodynamic model used is based on the Corcos wall pressure distribution. The structural-acoustic model encompasses a source panel (skin panel), coupled through an acoustic cavity to the radiating panel (trim panel). The radiating panel is backed by a larger acoustic enclosure (the back cavity). A feedback control unit is located inside the acoustic cavity between the two panels. It consists of a control force actuator and a sensor mounted at the actuator footprint on the radiating panel. The control actuator can react off the source panel. It is driven by an amplified velocity signal measured by the sensor. A fully coupled analytical structural-acoustic model is developed to study the effects of the active control on the sound transmission into the back cavity. The stability and performance of the active control system are firstly studied on a reduced order model. In the reduced order model only two fundamental modes of the fully coupled system are assumed. Secondly, a full order model is considered with a number of modes large enough to yield accurate simulation results up to 1000 Hz. It is shown that convincing reductions of the TBL-induced vibrations of the radiating panel and the sound pressure inside the back cavity can be expected. The reductions are more pronounced for a certain class of systems, which is characterised by the fundamental natural frequency of the skin panel larger than the fundamental natural frequency of the trim panel.

Cystic fibrosis carrier screening in a North American population.

PubMed

Zvereff, Val V; Faruki, Hawazin; Edwards, Marcia; Friedman, Kenneth J

2014-07-01

The aim of this study was to compare the mutation frequency distribution for a 32-mutation panel and a 69-mutation panel used for cystic fibrosis carrier screening. Further aims of the study were to examine the race-specific detection rates provided by both panels and to assess the performance of extended panels in large-scale, population-based cystic fibrosis carrier screening. Although genetic screening for the most common CFTR mutations allows detection of nearly 90% of cystic fibrosis carriers, the large number of other mutations, and their distribution within different ethnic groups, limits the utility of general population screening. Patients referred for cystic fibrosis screening from January 2005 through December 2010 were tested using either a 32-mutation panel (n = 1,601,308 individuals) or a 69-mutation panel (n = 109,830). The carrier frequencies observed for the 69-mutation panel study population (1/36) and Caucasian (1/27) and African-American individuals (1/79) agree well with published cystic fibrosis carrier frequencies; however, a higher carrier frequency was observed for Hispanic-American individuals (1/48) using the 69-mutation panel as compared with the 32-mutation panel (1/69). The 69-mutation panel detected ~20% more mutations than the 32-mutation panel for both African-American and Hispanic-American individuals. Expanded panels using race-specific variants can improve cystic fibrosis carrier detection rates within specific populations. However, it is important that the pathogenicity and the relative frequency of these variants are confirmed.

When Does Money Matter Most? Examining the Association between Income and Life Satisfaction over the Life Course

PubMed Central

Cheung, Felix; Lucas, Richard E.

2015-01-01

Previous research shows that the correlation between income and life satisfaction is small to medium in size. We hypothesized that income may mean different things to people at different ages, and therefore, that the association between income and life satisfaction may vary at different points in the life course. We tested this hypothesis in three nationally representative panel studies. Multilevel modeling techniques were used to test whether age moderated both the within- and between-person associations. Consistent with past research, we found that individuals who earned more on average and individuals who earned more over time reported higher levels of life satisfaction. Importantly, these effects were strongest for midlife individuals (those in their 30s–50s) compared to individuals who were younger or older. PMID:25621741

Experimental Study of the Bending Properties and Deformation Analysis of Web-Reinforced Composite Sandwich Floor Slabs with Four Simply Supported Edges.

PubMed

Qi, Yujun; Fang, Hai; Liu, Weiqing

2016-01-01

Web-reinforced composite sandwich panels exhibit good mechanical properties in one-way bending, but few studies have investigated their flexural behavior and deformation calculation methods under conditions of four simply supported edges. This paper studies the bending performance of and deformation calculation methods for two-way web-reinforced composite sandwich panels with different web spacing and heights. Polyurethane foam, two-way orthogonal glass-fiber woven cloth and unsaturated resin were used as raw materials in this study. Vacuum infusion molding was used to prepare an ordinary composite sandwich panel and 5 web-reinforced composite sandwich panels with different spacing and web heights. The panels were subjected to two-way panel bending tests with simple support for all four edges. The mechanical properties of these sandwich panels during the elastic stage were determined by applying uniformly distributed loads. The non-linear mechanical characteristics and failure modes were obtained under centrally concentrated loading. Finally, simulations of the sandwich panels, which used the mechanical model established herein, were used to deduce the formulae for the deflection deformation for this type of sandwich panel. The experimental results show that webs can significantly improve the limit bearing capacity and flexural rigidity of sandwich panels, with smaller web spacing producing a stronger effect. When the web spacing is 75 mm, the limit bearing capacity is 4.63 times that of an ordinary sandwich panel. The deduced deflection calculation formulae provide values that agree well with the measurements (maximum error <15%). The results that are obtained herein can provide a foundation for the structural design of this type of panel.

Experimental Study of the Bending Properties and Deformation Analysis of Web-Reinforced Composite Sandwich Floor Slabs with Four Simply Supported Edges

PubMed Central

Qi, Yujun; Fang, Hai; Liu, Weiqing

2016-01-01

Web-reinforced composite sandwich panels exhibit good mechanical properties in one-way bending, but few studies have investigated their flexural behavior and deformation calculation methods under conditions of four simply supported edges. This paper studies the bending performance of and deformation calculation methods for two-way web-reinforced composite sandwich panels with different web spacing and heights. Polyurethane foam, two-way orthogonal glass-fiber woven cloth and unsaturated resin were used as raw materials in this study. Vacuum infusion molding was used to prepare an ordinary composite sandwich panel and 5 web-reinforced composite sandwich panels with different spacing and web heights. The panels were subjected to two-way panel bending tests with simple support for all four edges. The mechanical properties of these sandwich panels during the elastic stage were determined by applying uniformly distributed loads. The non-linear mechanical characteristics and failure modes were obtained under centrally concentrated loading. Finally, simulations of the sandwich panels, which used the mechanical model established herein, were used to deduce the formulae for the deflection deformation for this type of sandwich panel. The experimental results show that webs can significantly improve the limit bearing capacity and flexural rigidity of sandwich panels, with smaller web spacing producing a stronger effect. When the web spacing is 75 mm, the limit bearing capacity is 4.63 times that of an ordinary sandwich panel. The deduced deflection calculation formulae provide values that agree well with the measurements (maximum error <15%). The results that are obtained herein can provide a foundation for the structural design of this type of panel. PMID:26871435

The Influence of Model Complexity on the Impact Response of a Shuttle Leading-Edge Panel Finite Element Simulation

NASA Technical Reports Server (NTRS)

Jones, Lisa E. (Technical Monitor); Stockwell, Alan E.

2005-01-01

LS-DYNA simulations were conducted to study the influence of model complexity on the response of a typical Reinforced Carbon-Carbon (RCC) panel to a foam impact at a location approximately midway between the ribs. A structural model comprised of Panels 10, 11, and TSeal 11 was chosen as the baseline model for the study. A simulation was conducted with foam striking Panel 10 at Location 4 at an alpha angle of 10 degrees, with an impact velocity of 1000 ft/sec. A second simulation was conducted after removing Panel 11 from the model, and a third simulation was conducted after removing both Panel 11 and T-Seal 11. All three simulations showed approximately the same response for Panel 10, and the simplified simulation model containing only Panel 10 was shown to be significantly less expensive to execute than the other two more complex models.

Wild immunology assessed by multidimensional mass cytometry.

PubMed

Japp, Alberto Sada; Hoffmann, Kerstin; Schlickeiser, Stephan; Glauben, Rainer; Nikolaou, Christos; Maecker, Holden T; Braun, Julian; Matzmohr, Nadine; Sawitzki, Birgit; Siegmund, Britta; Radbruch, Andreas; Volk, Hans-Dieter; Frentsch, Marco; Kunkel, Desiree; Thiel, Andreas

2017-01-01

A great part of our knowledge on mammalian immunology has been established in laboratory settings. The use of inbred mouse strains enabled controlled studies of immune cell and molecule functions in defined settings. These studies were usually performed in specific-pathogen free (SPF) environments providing standardized conditions. In contrast, mammalians including humans living in their natural habitat are continuously facing pathogen encounters throughout their life. The influences of environmental conditions on the signatures of the immune system and on experimental outcomes are yet not well defined. Thus, the transferability of results obtained in current experimental systems to the physiological human situation has always been a matter of debate. Studies elucidating the diversity of "wild immunology" imprintings in detail and comparing it with those of "clean" lab mice are sparse. Here, we applied multidimensional mass cytometry to dissect phenotypic and functional differences between distinct groups of laboratory and pet shop mice as a source for "wild mice". For this purpose, we developed a 31-antibody panel for murine leukocyte subsets identification and a 35-antibody panel assessing various cytokines. Established murine leukocyte populations were easily identified and diverse immune signatures indicative of numerous pathogen encounters were classified particularly in pet shop mice and to a lesser extent in quarantine and non-SPF mice as compared to SPF mice. In addition, unsupervised analysis identified distinct clusters that associated strongly with the degree of pathogenic priming, including increased frequencies of activated NK cells and antigen-experienced B- and T-cell subsets. Our study unravels the complexity of immune signatures altered under physiological pathogen challenges and highlights the importance of carefully adapting laboratory settings for immunological studies in mice, including drug and therapy testing. © 2016 International Society for Advancement of Cytometry. © 2016 International Society for Advancement of Cytometry.

Efficiency of geometric designs of flexible solar panels: mathematical simulation

NASA Astrophysics Data System (ADS)

Marciniak, Malgorzata; Hassebo, Yasser; Enriquez-Torres, Delfino; Serey-Roman, Maria Ignacia

2017-09-01

The purpose of this study is to analyze various surfaces of flexible solar panels and compare them to the traditional at panels mathematically. We evaluated the efficiency based on the integral formulas that involve flux. We performed calculations for flat panels with different positions, a cylindrical panel, conical panels with various opening angles and segments of a spherical panel. Our results indicate that the best efficiency per unit area belongs to particular segments of spherically-shaped panels. In addition, we calculated the optimal opening angle of a cone-shaped panel that maximizes the annual accumulation of the sun radiation per unit area. The considered shapes are presented below with a suggestion for connections of the cells.

A combined reference panel from the 1000 Genomes and UK10K projects improved rare variant imputation in European and Chinese samples

PubMed Central

Chou, Wen-Chi; Zheng, Hou-Feng; Cheng, Chia-Ho; Yan, Han; Wang, Li; Han, Fang; Richards, J. Brent; Karasik, David; Kiel, Douglas P.; Hsu, Yi-Hsiang

2016-01-01

Imputation using the 1000 Genomes haplotype reference panel has been widely adapted to estimate genotypes in genome wide association studies. To evaluate imputation quality with a relatively larger reference panel and a reference panel composed of different ethnic populations, we conducted imputations in the Framingham Heart Study and the North Chinese Study using a combined reference panel from the 1000 Genomes (N = 1,092) and UK10K (N = 3,781) projects. For rare variants with 0.01% < MAF ≤ 0.5%, imputation in the Framingham Heart Study with the combined reference panel increased well-imputed genotypes (with imputation quality score ≥0.4) from 62.9% to 76.1% when compared to imputation with the 1000 Genomes. For the North Chinese samples, imputation of rare variants with 0.01% < MAF ≤ 0.5% with the combined reference panel increased well-imputed genotypes by from 49.8% to 61.8%. The predominant European ancestry of the UK10K and the combined reference panels may explain why there was less of an increase in imputation success in the North Chinese samples. Our results underscore the importance and potential of larger reference panels to impute rare variants, while recognizing that increasing ethnic specific variants in reference panels may result in better imputation for genotypes in some ethnic groups. PMID:28004816

Experimental study of efficiency of solar panel by phase change material cooling

NASA Astrophysics Data System (ADS)

Wei, Nicholas Tan Jian; Nan, Wong Jian; Guiping, Cheng

2017-07-01

The dependence of efficiency of photovoltaic panels on their temperature during operation is a major concern for developers and users. In this paper, a phase change material (PCM) cooling system was designed for a 60W mono-crystalline solar panel. Tealights candle was selected as the cooling medium. The solar irradiance was recorded using Kipp & Zonen CMP3 pyranometer and Meteon data logger. Temperature distribution on the surface of solar panel, output voltage and output current of solar panel were measured. The average irradiance throughout data collection was found to be 705W/m2 and highest irradiance was 1100 W/m2. The average solar panel temperature was 43.6°C and a maximum temperature of 53°C was at the center of solar panel. Results showed that average power output and efficiency of the solar panel were 44.4W and 15%, respectively. It was found that the higher the solar irradiance, the lower the efficiency of solar panel and the higher the temperature and power output of solar panel. This is due to the fact that high irradiance results in high power input and high solar panel temperature. But high PV panel temperature reduces its power output. Therefore, the increase of power input outweighs that of power output, which leads to the decrease of efficiency of solar panel with the increase of solar irradiance. Compared with solar panel without cooling, the power output and efficiency of solar panel did not increase with PCM cooling. It indicates that Tealights candle as PCM cooling is not efficient in improving the efficiency of solar panel in this study.

ISPAN (Interactive Stiffened Panel Analysis): A tool for quick concept evaluation and design trade studies

NASA Technical Reports Server (NTRS)

Hairr, John W.; Dorris, William J.; Ingram, J. Edward; Shah, Bharat M.

1993-01-01

Interactive Stiffened Panel Analysis (ISPAN) modules, written in FORTRAN, were developed to provide an easy to use tool for creating finite element models of composite material stiffened panels. The modules allow the user to interactively construct, solve and post-process finite element models of four general types of structural panel configurations using only the panel dimensions and properties as input data. Linear, buckling and post-buckling solution capability is provided. This interactive input allows rapid model generation and solution by non finite element users. The results of a parametric study of a blade stiffened panel are presented to demonstrate the usefulness of the ISPAN modules. Also, a non-linear analysis of a test panel was conducted and the results compared to measured data and previous correlation analysis.

PMARC - PANEL METHOD AMES RESEARCH CENTER

NASA Technical Reports Server (NTRS)

Ashby, D. L.

1994-01-01

Panel methods are moderate cost tools for solving a wide range of engineering problems. PMARC (Panel Method Ames Research Center) is a potential flow panel code that numerically predicts flow fields around complex three-dimensional geometries. PMARC's predecessor was a panel code named VSAERO which was developed for NASA by Analytical Methods, Inc. PMARC is a new program with many additional subroutines and a well-documented code suitable for powered-lift aerodynamic predictions. The program's open architecture facilitates modifications or additions of new features. Another improvement is the adjustable size code which allows for an optimum match between the computer hardware available to the user and the size of the problem being solved. PMARC can be resized (the maximum number of panels can be changed) in a matter of minutes. Several other state-of-the-art PMARC features include internal flow modeling for ducts and wind tunnel test sections, simple jet plume modeling essential for the analysis and design of powered-lift aircraft, and a time-stepping wake model which allows the study of both steady and unsteady motions. PMARC is a low-order panel method, which means the singularities are distributed with constant strength over each panel. In many cases low-order methods can provide nearly the same accuracy as higher order methods (where the singularities are allowed to vary linearly or quadratically over each panel). Low-order methods have the advantage of a shorter computation time and do not require exact matching between panels. The flow problem is solved by assuming that the body is at rest in a moving flow field. The body is modeled as a closed surface which divides space into two regions -- one region contains the flow field of interest and the other contains a fictitious flow. External flow problems, such as a wing in a uniform stream, have the external region as the flow field of interest and the internal flow as the fictitious flow. This arrangement is reversed for internal flow problems where the internal region contains the flow field of interest and the external flow field is fictitious. In either case it is assumed that the velocity potentials in both regions satisfy Laplace's equation. PMARC has extensive geometry modeling capabilities for handling complex, three-dimensional surfaces. As with all panel methods, the geometry must be modeled by a set of panels. For convenience, the geometry is usually subdivided into several pieces and modeled with sets of panels called patches. A patch may be folded over on itself so that opposing sides of the patch form a common line. For example, wings are normally modeled with a folded patch to form the trailing edge of the wing. PMARC also has the capability to automatically generate a closing tip patch. In the case of a wing, a tip patch could be generated to close off the wing's third side. PMARC has a simple jet model for simulating a jet plume in a crossflow. The jet plume shape, trajectory, and entrainment velocities are computed using the Adler/Baron jet in crossflow code. This information is then passed back to PMARC. The wake model in PMARC is a time-stepping wake model. The wake is convected downstream from the wake separation line by the local velocity flowfield. With each time step, a new row of wake panels is added to the wake at the wake separation line. PMARC also allows an initial wake to be specified if desired, or, as a third option, no wakes need be modeled. The effective presentation of results for aerodynamics problems requires the generation of report-quality graphics. PMAPP (ARC-12751), the Panel Method Aerodynamic Plotting Program, (Sterling Software), was written for scientists at NASA's Ames Research Center to plot the aerodynamic analysis results (flow data) from PMARC. PMAPP is an interactive, color-capable graphics program for the DEC VAX or MicroVAX running VMS. It was designed to work with a variety of terminal types and hardcopy devices. PMAPP is available separately from COSMIC. PMARC was written in standard FORTRAN77 using adjustable size arrays throughout the code. Redimensioning PMARC will change the amount of disk space and memory the code requires to be able to run; however, due to its memory requirements, this program does not readily lend itself to implementation on MS-DOS based machines. The program was implemented on an Apple Macintosh (using 2.5 MB of memory) and tested on a VAX/VMS computer. The program is available on a 3.5 inch Macintosh format diskette (standard media) or in VAX BACKUP format on TK50 tape cartridge or 9-track magnetic tape. PMARC was developed in 1989.

Summary of typical parameters that affect sound transmission through general aviation aircraft structures

NASA Technical Reports Server (NTRS)

Grosveld, F.; Navaneethan, R.; Roskam, J.

1981-01-01

This paper presents results of a systematic experimental investigation of parameters which affect sound transmission through general aviation structures. Parameters studied include angle of sound incidence, panel curvature, panel stresses, and edge conditions for bare panels; pane thickness, spacing, inclination of window panes, and depressurization for dual pane windows; densities of hard foam and sound absorption materials, air gaps, and trim panel thickness for multilayered panels. Based on the study, some promising methods for reducing interior noise in general aviation airplanes are discussed.

EXAMINING EVIDENCE IN U.S. PAYER COVERAGE POLICIES FOR MULTI-GENE PANELS AND SEQUENCING TESTS

PubMed Central

Chambers, James D.; Saret, Cayla J.; Anderson, Jordan E.; Deverka, Patricia A.; Douglas, Michael P.; Phillips, Kathryn A.

2017-01-01

Objectives The aim of this study was to examine the evidence payers cited in their coverage policies for multi-gene panels and sequencing tests (panels), and to compare these findings with the evidence payers cited in their coverage policies for other types of medical interventions. Methods We used the University of California at San Francisco TRANSPERS Payer Coverage Registry to identify coverage policies for panels issued by five of the largest US private payers. We reviewed each policy and categorized the evidence cited within as: clinical studies, systematic reviews, technology assessments, cost-effectiveness analyses (CEAs), budget impact studies, and clinical guidelines. We compared the evidence cited in these coverage policies for panels with the evidence cited in policies for other intervention types (pharmaceuticals, medical devices, diagnostic tests and imaging, and surgical interventions) as reported in a previous study. Results Fifty-five coverage policies for panels were included. On average, payers cited clinical guidelines in 84 percent of their coverage policies (range, 73–100 percent), clinical studies in 69 percent (50–87 percent), technology assessments 47 percent (33–86 percent), systematic reviews or meta-analyses 31 percent (7–71 percent), and CEAs 5 percent (0–7 percent). No payers cited budget impact studies in their policies. Payers less often cited clinical studies, systematic reviews, technology assessments, and CEAs in their coverage policies for panels than in their policies for other intervention types. Payers cited clinical guidelines in a comparable proportion of policies for panels and other technology types. Conclusions Payers in our sample less often cited clinical studies and other evidence types in their coverage policies for panels than they did in their coverage policies for other types of medical interventions. PMID:29065945

EXAMINING EVIDENCE IN U.S. PAYER COVERAGE POLICIES FOR MULTI-GENE PANELS AND SEQUENCING TESTS.

PubMed

Chambers, James D; Saret, Cayla J; Anderson, Jordan E; Deverka, Patricia A; Douglas, Michael P; Phillips, Kathryn A

2017-01-01

The aim of this study was to examine the evidence payers cited in their coverage policies for multi-gene panels and sequencing tests (panels), and to compare these findings with the evidence payers cited in their coverage policies for other types of medical interventions. We used the University of California at San Francisco TRANSPERS Payer Coverage Registry to identify coverage policies for panels issued by five of the largest US private payers. We reviewed each policy and categorized the evidence cited within as: clinical studies, systematic reviews, technology assessments, cost-effectiveness analyses (CEAs), budget impact studies, and clinical guidelines. We compared the evidence cited in these coverage policies for panels with the evidence cited in policies for other intervention types (pharmaceuticals, medical devices, diagnostic tests and imaging, and surgical interventions) as reported in a previous study. Fifty-five coverage policies for panels were included. On average, payers cited clinical guidelines in 84 percent of their coverage policies (range, 73-100 percent), clinical studies in 69 percent (50-87 percent), technology assessments 47 percent (33-86 percent), systematic reviews or meta-analyses 31 percent (7-71 percent), and CEAs 5 percent (0-7 percent). No payers cited budget impact studies in their policies. Payers less often cited clinical studies, systematic reviews, technology assessments, and CEAs in their coverage policies for panels than in their policies for other intervention types. Payers cited clinical guidelines in a comparable proportion of policies for panels and other technology types. Payers in our sample less often cited clinical studies and other evidence types in their coverage policies for panels than they did in their coverage policies for other types of medical interventions.

Exit, Voice, and Suffering: Do Couples Adapt to Changing Employment Patterns?

ERIC Educational Resources Information Center

Gershuny, Jonathan; Bittman, Michael; Brice, John

2005-01-01

What is the long-term effect of the emerging predominance of the dual-earner family? This study uses data from 3 national household panel surveys-the British Household Panel Survey (N= 16,044), the German Socioeconomic Panel (N= 14,164), and the U.S. Panel Study of Income Dynamics (N= 7,423)which provide, for the first time, clear and direct…

Fabrication and evaluation of superplastically formed/weld-brazed corrugated compression panels with beaded webs

NASA Technical Reports Server (NTRS)

Royster, D. M.; Davis, R. C.; Shinn, J. M., Jr.; Bales, T. T.; Wiant, H. R.

1985-01-01

A study was made to investigate the feasibility of superplastically forming corrugated panels with beaded webs and to demonstrate the structural integrity of these panels by testing. The test panels in the study consist of superplastically formed titanium alloy Ti-6Al-4V half-hat elements that are joined by weld-brazing to titanium alloy Ti-6Al-4V caps to form either single-corrugation compression panels or multiple-corrugation compression panels. Stretching and subsequent thinning of the titanium sheet during superplastic forming is reduced by approximately 35 percent with a shallow half-hat die concept instead of a deep die concept and results in a more uniform thickness across the beaded webs. The complete panels are tested in end compression at room temperature and the results compared with analysis. The heavily loaded panels failed at loads approaching the yield strength of the titanium material. At maximum load, the caps wrinkled locally accompanied with separation of the weld-braze joint in the wrinkle. None of the panels tested, however, failed catastrophically in the weld-braze joint. Experimental test results are in good agreement with structural analysis of the panels.

Individual health and the visibility of village economic inequality: Longitudinal evidence from native Amazonians in Bolivia.

PubMed

Undurraga, Eduardo A; Nica, Veronica; Zhang, Rebecca; Mensah, Irene C; Godoy, Ricardo A

2016-12-01

Mounting evidence suggests that income inequality is associated with worse individual health. But does the visibility of inequality matter? Using data from a horticultural-foraging society of native Amazonians in Bolivia (Tsimane'), we examined whether village inequality in resources and behaviors with greater cultural visibility is more likely to bear a negative association with health than village inequality in less conspicuous resources. We draw on a nine-year annual panel (2002-2010) from 13 Tsimane' villages for our main analysis, and an additional survey to gauge the cultural visibility of resources. We measured inequality using the Gini coefficient. We tested the robustness of our results using a shorter two-year annual panel (2008-2009) in another 40 Tsimane' villages and an additional measure of inequality (coefficient of variation, CV). Behaviors with low cultural visibility (e.g., household farm area planted with staples) were less likely to be associated with individual health, compared to more conspicuous behaviors (e.g., expenditures in durable goods, consumption of domesticated animals). We find some evidence that property rights and access to resources matter, with inequality of privately-owned resources showing a larger effect on health. More inequality was associated with improved perceived health - maybe due to improved health prospects from increasing wealth - and worse anthropometric indicators. For example, a unit increase in the Gini coefficient of expenditures in durable goods was associated with 0.24 fewer episodes of stress and a six percentage-point lower probability of reporting illness. A one-point increase in the CV of village inequality in meat consumption was associated with a 4 and 3 percentage-point lower probability of reporting illness and being in bed due to illness, and a 0.05 SD decrease in age-sex standardized arm-muscle area. In small-scale, rural societies at the periphery of market economies, nominal economic inequality in resources bore an association with individual health, but did not necessarily harm perceived health. Economic inequalities in small-scale societies apparently matter, but a thick cultural tapestry of reciprocity norms and kinship ties makes their effects less predictable than in industrial societies. Copyright © 2016 Elsevier B.V. All rights reserved.

Characterization of Dust on Solar Devices in Southern Nevada =

NASA Astrophysics Data System (ADS)

Sylva, Jason R.

Dust can impact the efficiency of solar energy collection devices, and in some arid environments, dust can reduce solar energy efficiency up to 30%. Reducing the impact of dust is therefore critical in the expansion of solar technology throughout regions where solar energy is utilized. Characterization of suspended and settled particulate matter can assist in developing strategies for dust mitigation. With the characterization of suspended and settled particulate in remote, rural, and urban environments, more informed decisions can be made regarding the selection of coating material on solar panels as well as developing cleaning and maintenance procedures. Particulate matter that deposits on a solar surface can potentially interact with solar radiation, precipitation, or even directly with the surface material itself. These interactions could lead to the formation of coatings that reduce/block radiation and/or degrade the integrity of the surface. When you extrapolate these possibilities to a larger scale preliminary characterization of dust will play a vital role when planning the construction of a solar energy facility. A variety of sampling techniques were employed to obtain particulate matter for characterization. These included direct collection of particulates from solar surfaces: via vacuum and wipe sample collection on panels, tacky dot adhesive slides and plain slides that were exposed at different intervals, desert vugs that are natural particulate collectors, as well as high volume air sampling for collection of suspended particulates. High volume air sampling was performed using glass fiber filters and 2 micron stainless steel screens. Direct collection of settled particulates was performed by sampling from solar surfaces, vugs, and by collection on exposed glass surfaces. Collection onto glass surfaces was achieved by setting up a plain microscope slide, tacky dot slides, and panes of glass. The sampling methodology allowed for the collection of samples for analyses using various analytical methods that included Raman microspectroscopy, pyrolysis gas chromatography mass spectrometry, ion chromatography and inductively coupled plasma mass spectrometry. These various methods allow for identification of organic and inorganic components as well the mineral distribution of suspended and settled particulate material. None None None None None

Individual health and the visibility of village economic inequality: Longitudinal evidence from native Amazonians in Bolivia

PubMed Central

Undurraga, Eduardo A.; Nica, Veronica; Zhang, Rebecca; Mensah, Irene C.; Godoy, Ricardo A.

2016-01-01

Mounting evidence suggests that income inequality is associated with worse individual health. But does the visibility of inequality matter? Using data from a horticultural-foraging society of native Amazonians in Bolivia (Tsimane’), we examined whether village inequality in resources and behaviors with greater cultural visibility are more likely to bear a negative association with health than village inequality in less conspicuous resources. We draw on a nine-year annual panel (2002–2010) from 13 Tsimane’ villages for our main analysis, and an additional survey to gauge the cultural visibility of resources. We measured inequality using the Gini coefficient. We tested the robustness of our results using a shorter two-year annual panel (2008–2009) in another 40 Tsimane’ villages and another measure of inequality (coefficient of variation, CV). Behaviors with low cultural visibility (e.g., household farm area planted with staples) were less likely to be associated with individual health, compared to more conspicuous behaviors (e.g., expenditures in durable goods, consumption of domesticated animals). We find some evidence that property rights and access to resources matter, with inequality of privately-owned resources showing a larger effect on health. More inequality was associated with improved perceived health – maybe due to improved health prospects from increasing wealth – and worse anthropometric indicators. For example, a unit increase in the Gini coefficient of expenditures in durable goods was associated with 0.24 fewer episodes of stress and a six percentage-point lower probability of reporting illness. A one-point increase in the CV of village inequality in meat consumption was associated with a 4 and 3 percentage-point lower probability of reporting illness and being in bed due to illness, and a 0.05 SD decrease in age-sex standardized arm-muscle area. In small-scale, rural societies at the periphery of market economies, nominal economic inequality in resources bore an association with individual health, but did not necessarily harm perceived health. Economic inequalities in small-scale societies apparently matter, but a thick cultural tapestry of reciprocity norms and kinship ties makes their effects less predictable than in industrial societies. PMID:27398876

Does the Timing of Food Stamp Distribution Matter? A Panel-Data Analysis of Monthly Purchasing Patterns of US Households.

PubMed

Castellari, Elena; Cotti, Chad; Gordanier, John; Ozturk, Orgul

2017-11-01

In this paper, we examine the relationship between the timing of food stamp receipt and purchasing patterns. We combine data on state distribution dates of food stamps with scanner data on a panel of households purchases tracked between 2004 and 2011. We find that purchases of a variety of goods are meaningfully higher on receipt days, consistent with previous work that suggests that recipients are very impatient. Additionally, and importantly, estimates indicate that when food stamp receipt days fall on weekends, total monthly purchases within the same households are affected. In particular, monthly purchases of beer are higher when food stamps are distributed on a weekend rather than in months where benefits are distributed on weekdays. For these households, total beer purchases are between 4 and 5% higher in those months. Among households ineligible for food stamps, no effect is identified. These results demonstrate that the 'day-of-the-week' of SNAP treatment may have important impacts on household purchase habits. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Developing a competency framework for U.S. state food and feed testing laboratory personnel.

PubMed

Kaml, Craig; Weiss, Christopher C; Dezendorf, Paul; Ishida, Maria; Rice, Daniel H; Klein, Ron; Salfinger, Yvonne

2014-01-01

A competency-based training curriculum framework for U.S. state food and feed testing laboratories personnel is being developed by the International Food Protection Training Institute (IFPTI) and three partners. The framework will help laboratories catalog existing training courses/modules, identify training gaps, inform training curricula, and create career-spanning professional development learning paths, ensuring consistent performance expectations and increasing confidence in shared test results. Ultimately, the framework will aid laboratories in meeting the requirements of ISO/IEC 17025 (2005) international accreditation and the U.S. Food Safety Modernization Act (U.S. Public Law 111-353). In collaboration with the Association of Food and Drug Officials, the Association of Public Health Laboratories, and the Association of American Feed Control Officials, IFPTI is carrying out the project in two phases. In 2013, an expert panel of seven subject matter experts developed competency and curriculum frameworks for five professional levels (entry, mid-level, expert, supervisor/manager, and senior administration) across four competency domains (technical, communication, programmatic, and leadership) including approximately 80 competencies. In 2014 the expert panel will elicit feedback from peers and finalize the framework.

Physico-chemical characterisation of glass soiling in rural, urban and industrial environments.

PubMed

Lombardo, T; Chabas, A; Verney-Carron, A; Cachier, H; Triquet, S; Darchy, S

2014-01-01

Glass materials are broadly used in the built environment (windows, facades, roofs, museum showcases, and solar panels) due to their optical (transparency) and thermal properties. Their interaction with the multiphase atmospheric medium results in a more or less pronounced transparency loss called soiling. This phenomenon leads to a loss of amenity of artefacts; consequently, high cleaning costs have to be supported by public and private entities. Complete understanding of the nature of surface deposit appears thus extremely important for addressing strategies to control it. The present research is based on the sheltered exposure, in different environments, of durable glass panels during 1 year. At these different locations, airborne pollutant concentrations have also been monitored. Three environments have been investigated: rural (R), urban (U) and industrial (I). Results show that the mass of the deposit and the optical impairment of the glass (haze) are too spread to allow discriminating between different environments. However, the analyses of soluble species and particulate organic matter allow identifying factors responsible for soiling and highlighted the reactivity of deposit to relative humidity which favours post-deposit evolution.

Evaluation of a Composite Sandwich Fuselage Side Panel with Damage and Subjected to Internal Pressure

NASA Technical Reports Server (NTRS)

Rouse, Marshall; Ambur, Damodar R.; Bodine, Jerry; Dopker, Bernhard

1997-01-01

The results from an experimental and analytical study of a composite sandwich fuselage side panel for a transport aircraft are presented. The panel has two window cutouts and three frames, and has been evaluated with internal pressure loads that generate biaxial tension loading conditions. Design limit load and design ultimate load tests have been performed on the graphite-epoxy sandwich panel with the middle frame removed to demonstrate the suitability of this two-frame design for supporting the prescribed biaxial loading conditions with twice the initial frame spacing of 20 inches. The two-frame panel was damaged by cutting a notch that originates at the edge of a cutout and extends in the panel hoop direction through the window-belt area. This panel with a notch was tested in a combined-load condition to demonstrate the structural damage tolerance at the design limit load condition. The two panel configurations successfully satisfied all design load requirements in the experimental part of the study, and the three-frame and two-frame panel responses are fully explained by the analysis results. The results of this study suggest that there is potential for using sandwich structural concepts with greater than the usual 20-in.-wide frame spacing to further reduce aircraft fuselage structural weight.

Acute effects of PM2.5 on lung function parameters in schoolchildren in Nanjing, China: a panel study.

PubMed

Xu, Dandan; Zhang, Yi; Zhou, Lian; Li, Tiantian

2018-03-17

The association between exposure to ambient particulate matter (PM) and reduced lung function parameters has been reported in many works. However, few studies have been conducted in developing countries with high levels of air pollution like China, and little attention has been paid to the acute effects of short-term exposure to air pollution on lung function. The study design consisted of a panel comprising 86 children from the same school in Nanjing, China. Four measurements of lung function were performed. A mixed-effects regression model with study participant as a random effect was used to investigate the relationship between PM 2.5 and lung function. An increase in the current day, 1-day and 2-day moving average PM 2.5 concentration was associated with decreases in lung function indicators. The greatest effect of PM 2.5 on lung function was detected at 1-day moving average PM 2.5 exposure. An increase of 10 μg/m 3 in the 1-day moving average PM 2.5 concentration was associated with a 23.22 mL decrease (95% CI: 13.19, 33.25) in Forced Vital Capacity (FVC), a 18.93 mL decrease (95% CI: 9.34, 28.52) in 1-s Forced Expiratory Volume (FEV 1 ), a 29.38 mL/s decrease (95% CI: -0.40, 59.15) in Peak Expiratory Flow (PEF), and a 27.21 mL/s decrease (95% CI: 8.38, 46.04) in forced expiratory flow 25-75% (FEF 25-75% ). The effects of PM 2.5 on lung function had significant lag effects. After an air pollution event, the health effects last for several days and we still need to pay attention to health protection.

The associations between ambient air pollution and adult respiratory mortality in 32 major Chinese cities, 2006-2010.

PubMed

Zhou, Maigeng; He, Guojun; Liu, Yunning; Yin, Peng; Li, Yichong; Kan, Haidong; Fan, Maorong; Xue, An; Fan, Maoyong

2015-02-01

China has experienced increasingly severe levels of air pollution in the past decades, yet studies on the health effects of air pollution in China at a national study level, remain limited. This study assess the sub-chronic effect of ambient air pollution on respiratory mortality in the 32 largest Chinese cities. We employ two-way fixed effects panel data analysis and monthly air pollution and mortality panel data. We estimate associations between monthly respiratory mortality and air pollution; pollution is defined as particulate matter with aerodynamic diameter <10μm. We adjust for city characteristics, seasonality (monthly effects), and weather conditions (precipitation and temperature). We examine the associations between monthly injury mortality and air pollution to check for robustness. The results show positive and statistically significant associations of air pollution with respiratory mortality. During the study period (2006-2010) a 10μg/m(3) increase in monthly PM10 concentration is associated with a 1.05% (95% CI, 0.08-2.04%) increase in adult respiratory mortality rate. The air pollution effect is the most salient in northern cities (with central heating system) during the cold season (October-April); a 10μg/m(3) increase in monthly PM10 concentrations is associated with a 1.62% (95% CI, 0.22-3.46%) increase in the elderly respiratory mortality rate. There is no statistically significant association between the young adult respiratory mortality and air pollution. The elderly respiratory mortality rate in China is positively and statistically significantly associated with air pollution. The effect is largest in northern cities during cold months when coal is burned for heating. Copyright © 2014 Elsevier Inc. All rights reserved.

A Study of Damage Tolerance in Curved Composite Panels.

DTIC Science & Technology

1988-03-01

A198 617 A STUDY OF DAMAGE TOLERANCE IN CURVED COMPOSITE PANELS 1/2 I CNO O NGNERN BLNuE Hl(U) Ala FORCE INST OF TECH &IRIGHT-PATTERSON APR ON...OAL B PEAU OF STANOARDS- -T - % r . P.4 .% FILE CC R CDV OF DTIC MAR3 11988 *grr A STUDY OF DAMAGE TOLERANCE IN CURVED COMPOSITE PANELS THESIS...AFIT/GA/AA/88-.3 0 A STUDY OF DAMAGE TOLERANCE IN CURVED COMPOSITE PANELS THESIS - Brendan L. Wilder Captain, USAF S*2822 $$$*fltf$$*2*f$1fltf

Climate Change, Soils, and Human Health

NASA Astrophysics Data System (ADS)

Brevik, Eric C.

2013-04-01

According to the Intergovernmental Panel on Climate Change, global temperatures are expected to increase 1.1 to 6.4 degrees C during the 21st century and precipitation patterns will be altered by climate change (IPCC, 2007). Soils are intricately linked to the atmospheric/climate system through the carbon, nitrogen, and hydrologic cycles. Altered climate will, therefore, have an effect on soil processes and properties. Studies into the effects of climate change on soil processes and properties are still incomplete, but have revealed that climate change will impact soil organic matter dynamics including soil organisms and the multiple soil properties that are tied to organic matter, soil water, and soil erosion. The exact direction and magnitude of those impacts will be dependent on the amount of change in atmospheric gases, temperature, and precipitation amounts and patterns. Recent studies give reason to believe at least some soils may become net sources of atmospheric carbon as temperatures rise; this is particularly true of high latitude regions with permanently frozen soils. Soil erosion by both wind and water is also likely to increase. These soil changes will lead to both direct and indirect impacts on human health. Possible indirect impacts include temperature extremes, food safety and air quality issues, increased and/or expanded disease incidences, and occupational health issues. Potential direct impacts include decreased food security and increased atmospheric dust levels. However, there are still many things we need to know more about. How climate change will affect the nitrogen cycle and, in turn, how the nitrogen cycle will affect carbon sequestration in soils is a major research need, as is a better understanding of soil water-CO2 level-temperature relationships. Knowledge of the response of plants to elevated atmospheric CO2 given limitations in nutrients like nitrogen and phosphorus and how that affects soil organic matter dynamics is a critical need. There is also a great need for a better understanding of how soil organisms will respond to climate change because those organisms are incredibly important in a number of soil processes, including the carbon and nitrogen cycles. All of these questions are important in trying to understand human health impacts. More information on climate change, soils, and human health issues can be found in Brevik (2012). References Brevik, E.C. 2012. Climate change, soils, and human health. In: E.C. Brevik and L. Burgess (Eds). Soils and human health. CRC Press, Boca Raton, FL. in press. IPCC. 2007. Summary for policymakers. pp. 1-18. In S. Solomon, D. Qin, M. Manning, Z. Chen, M. Marquis, K.B. Averyt, M.Tignor and H.L. Miller (eds). Climate change 2007: the physical science basis. Contribution of Working Group I to the Fourth Assessment Report of the Intergovernmental Panel on Climate Change. Cambridge University Press, Cambridge, UK.

Composite panel development at JPL

NASA Technical Reports Server (NTRS)

Mcelroy, Paul; Helms, Rich

1988-01-01

Parametric computer studies can be use in a cost effective manner to determine optimized composite mirror panel designs. An InterDisciplinary computer Model (IDM) was created to aid in the development of high precision reflector panels for LDR. The materials properties, thermal responses, structural geometries, and radio/optical precision are synergistically analyzed for specific panel designs. Promising panels designs are fabricated and tested so that comparison with panel test results can be used to verify performance prediction models and accommodate design refinement. The iterative approach of computer design and model refinement with performance testing and materials optimization has shown good results for LDR panels.

Combined-load buckling behavior of metal-matrix composite sandwich panels under different thermal environments

NASA Technical Reports Server (NTRS)

Ko, William L.; Jackson, Raymond H.

1991-01-01

Combined compressive and shear buckling analysis was conducted on flat rectangular sandwich panels with the consideration of transverse shear effects of the core. The sandwich panel is fabricated with titanium honeycomb core and laminated metal matrix composite face sheets. The results show that the square panel has the highest combined load buckling strength, and that the buckling strength decreases sharply with the increases of both temperature and panel aspect ratio. The effect of layup (fiber orientation) on the buckling strength of the panels was studied in detail. The metal matrix composite sandwich panel was much more efficient than the sandwich panel with nonreinforced face sheets and had the same specific weight.

Simplified Calculation Model and Experimental Study of Latticed Concrete-Gypsum Composite Panels

PubMed Central

Jiang, Nan; Ma, Shaochun

2015-01-01

In order to address the performance complexity of the various constituent materials of (dense-column) latticed concrete-gypsum composite panels and the difficulty in the determination of the various elastic constants, this paper presented a detailed structural analysis of the (dense-column) latticed concrete-gypsum composite panel and proposed a feasible technical solution to simplified calculation. In conformity with mechanical rules, a typical panel element was selected and divided into two homogenous composite sub-elements and a secondary homogenous element, respectively for solution, thus establishing an equivalence of the composite panel to a simple homogenous panel and obtaining the effective formulas for calculating the various elastic constants. Finally, the calculation results and the experimental results were compared, which revealed that the calculation method was correct and reliable and could meet the calculation needs of practical engineering and provide a theoretical basis for simplified calculation for studies on composite panel elements and structures as well as a reference for calculations of other panels. PMID:28793631

Simplified Calculation Model and Experimental Study of Latticed Concrete-Gypsum Composite Panels.

PubMed

Jiang, Nan; Ma, Shaochun

2015-10-27

In order to address the performance complexity of the various constituent materials of (dense-column) latticed concrete-gypsum composite panels and the difficulty in the determination of the various elastic constants, this paper presented a detailed structural analysis of the (dense-column) latticed concrete-gypsum composite panel and proposed a feasible technical solution to simplified calculation. In conformity with mechanical rules, a typical panel element was selected and divided into two homogenous composite sub-elements and a secondary homogenous element, respectively for solution, thus establishing an equivalence of the composite panel to a simple homogenous panel and obtaining the effective formulas for calculating the various elastic constants. Finally, the calculation results and the experimental results were compared, which revealed that the calculation method was correct and reliable and could meet the calculation needs of practical engineering and provide a theoretical basis for simplified calculation for studies on composite panel elements and structures as well as a reference for calculations of other panels.

Mitochondrial Genetic Background Modifies the Relationship between Traffic-Related Air Pollution Exposure and Systemic Biomarkers of Inflammation

PubMed Central

Wittkopp, Sharine; Staimer, Norbert; Tjoa, Thomas; Gillen, Daniel; Daher, Nancy; Shafer, Martin; Schauer, James J.; Sioutas, Constantinos; Delfino, Ralph J.

2013-01-01

Background Mitochondria are the main source of reactive oxygen species (ROS). Human mitochondrial haplogroups are linked to differences in ROS production and oxidative-stress induced inflammation that may influence disease pathogenesis, including coronary artery disease (CAD). We previously showed that traffic-related air pollutants were associated with biomarkers of systemic inflammation in a cohort panel of subjects with CAD in the Los Angeles air basin. Objective We tested whether air pollutant exposure-associated inflammation was stronger in mitochondrial haplogroup H than U (high versus low ROS production) in this panel (38 subjects and 417 observations). Methods Inflammation biomarkers were measured weekly in each subject (≤12 weeks), including interleukin-6 (IL-6), tumor necrosis factor-α (TNF-α), C-reactive protein, interleukin-6 soluble receptor and tumor necrosis factor-soluble receptor II. We determined haplogroup by restriction fragment length polymorphism analysis. Air pollutants included nitrogen oxides (NOx), carbon monoxide (CO), organic carbon, elemental and black carbon (EC, BC); and particulate matter mass, three size fractions (<0.25 µm, 0.25–2.5 µm, and 2.5–10 µm in aerodynamic diameter). Particulate matter extracts were analyzed for organic compounds, including polycyclic aromatic hydrocarbons (PAH), and in vitro oxidative potential of aqueous extracts. Associations between exposures and biomarkers, stratified by haplogroup, were analyzed by mixed-effects models. Results IL-6 and TNF-α were associated with traffic-related air pollutants (BC, CO, NOx and PAH), and with mass and oxidative potential of quasi-ultrafine particles <0.25 µm. These associations were stronger for haplogroup H than haplogroup U. Conclusions Results suggest that mitochondrial haplogroup U is a novel protective factor for air pollution-related systemic inflammation in this small group of subjects. PMID:23717615

Observed Home Dampness and Mold Are Associated with Sustained Spikes in Personal Exposure to Particulate Matter Less than 10 μm in Diameter in Exacerbation-Prone Children with Asthma.

PubMed

Dutmer, Cullen M; Schiltz, Allison M; Freeman, Kristy L; Christie, Matthew J; Cerna, Juana A; Cho, Seung-Hyun; Chartier, Ryan T; Thornburg, Jonathan W; Hamlington, Katharine L; Crooks, James L; Fingerlin, Tasha E; Schwartz, David A; Liu, Andrew H

2018-04-01

Home dampness and mold are associated with asthma severity and exacerbations, but little is known about the nature of these exposures in at-risk children. To test the hypothesis that observed dampness, water damage, and mold in the home are associated with higher exposure to particulate matter less than 10 μm in diameter in a cohort of at-risk children with asthma. We performed a pilot study in 8- to 16-year-old children with exacerbation-prone asthma (n = 29; Denver Asthma Panel Study). Exposure to particulate matter less than 10 μm in diameter was measured over ∼72 hours with personal wearable monitors (MicroPEM [RTI International] and iTrack Micro GPS tracker) and stationary bedroom-located monitors (PEM, MSP Corporation). Mean percentage personal monitored time was 93% (95% confidence interval, 90-96%). Mean and spikes of real-time exposure to particulate matter less than 10 μm in diameter were calculated and, for personal monitored samples, partitioned into exposure while at home, school, or other locations. We defined a sustained spike exposure as a continuous period of 20 minutes or longer during which levels were greater than 50 μg/μL over the participant's minimum levels, using a 2-minute moving average of the particulate matter measurements. Mold and dampness were assessed by detailed home inspection. Visible water damage/moisture/mold and mold/mildew were common in the homes of exacerbation-prone children: bathroom, 60% and 46%; basement, 30% and 34%; kitchen, 22% and 39%; living room, 20% and 2%; bedroom, 12% and 2%; and other rooms, 21% and 7%, respectively. Personal and bedroom filter-based levels of particulate matter less than 10 μm in diameter were associated with home cumulative measures of water damage/moisture/mold (personal r 2  = 0.13, P = 0.02; bedroom r 2  = 0.19, P = 0.006; analysis of variance) and mold/mildew (personal r 2  = 0.11, P = 0.04; bedroom r 2  = 0.18, P = 0.008). Real-time integrated particulate matter less than 10 μm in diameter during sustained spike exposures that occurred when participants were home (normalized by total duration of sustained spike exposures) was associated with cumulative drips/leaks/wet areas (r 2  = 0.27; P = 0.004), mold/mildew (r 2  = 0.15; P = 0.04), and water damage/moisture/mold (r 2  = 0.14; P = 0.04). Other measures of exposure to particulate matter less than 10 μm in diameter from personal or stationary monitors were not associated with home dampness or mold indicators. Although mold exposure was not directly quantified in the respirable aerosol in this study, observations of home dampness and mold were associated with sustained spikes in respirable particulate matter less than 10 μm in diameter that was measured by wearable real-time monitors. In our cohort of at-risk children, this finding could imply that mold may exert respiratory health effects via sustained spikes in exposure and help to guide future studies and interventions to reduce these spikes and improve asthma outcomes.

Reliability of stiffened structural panels: Two examples

NASA Technical Reports Server (NTRS)

Stroud, W. Jefferson; Davis, D. Dale, Jr.; Maring, Lise D.; Krishnamurthy, Thiagaraja; Elishakoff, Isaac

1992-01-01

The reliability of two graphite-epoxy stiffened panels that contain uncertainties is examined. For one panel, the effect of an overall bow-type initial imperfection is studied. The size of the bow is assumed to be a random variable. The failure mode is buckling. The benefits of quality control are explored by using truncated distributions. For the other panel, the effect of uncertainties in a strain-based failure criterion is studied. The allowable strains are assumed to be random variables. A geometrically nonlinear analysis is used to calculate a detailed strain distribution near an elliptical access hole in a wing panel that was tested to failure. Calculated strains are used to predict failure. Results are compared with the experimental failure load of the panel.

Postbuckling behavior of axially compressed graphite-epoxy cylindrical panels with circular holes

NASA Technical Reports Server (NTRS)

Knight, N. F., Jr.; Starnes, J. H., Jr.

1984-01-01

The results of an experimental and analytical study of the effects of circular holes on the postbuckling behavior of graphite-epoxy cylindrical panels loaded in axial compression are presented. The STAGSC-1 general shell analysis computer code is used to determine the buckling and postbuckling response of the panels. The loaded, curved ends of the specimens were clamped by fixtures and the unloaded, straight edges were simply supported by knife-edge restraints. The panels are loaded by uniform end shortening to several times the end shortening at buckling. The unstable equilibrium path of the postbuckling response is obtained analytically by using a method based on controlling an equilibrium-path-arc-length parameter instead of the traditional load parameter. The effects of hole diameter, panel radius, and panel thickness on postbuckling response are considered in the study. Experimental results are compared with the analytical results and the failure characteristics of the graphite-epoxy panels are described.

75 FR 1589 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-12

... Census Coverage Measurement Recall Bias Panel Study has been added. Two previous notices were published... Reinterview, and Recall Bias Panel Study. OMB Control Number: None. Form Number(s): All data will be collected... different PI enumerator. In addition to the CCM PI Operation, CCM will conduct a Recall Bias Panel Study...

75 FR 7469 - Panel Member List for Hydropower Licensing Study Dispute Resolution; Notice Extending Filing Date...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-19

... List for Hydropower Licensing Study Dispute Resolution; Notice Extending Filing Date for Applications for Panel Member List for Hydropower Licensing Study Dispute Resolution February 4, 2010. On October... on a list of resource experts willing to serve as a third panel member in the Commission's hydropower...

Study of the damping characteristics of general aviation aircraft panels and development of computer programs to calculate the effectiveness of interior noise control treatment, part 1

NASA Technical Reports Server (NTRS)

Navaneethan, R.; Hunt, J.; Quayle, B.

1982-01-01

Tests were carried out on 20 inch x 20 inch panels at different test conditions using free-free panels, clamped panels, and panels as installed in the KU-FRL acoustic test facility. Tests with free-free panels verified the basic equipment set-up and test procedure. They also provided a basis for comparison. The results indicate that the effect of installed panels is to increase the damping ratio at the same frequency. However, a direct comparison is not possible, as the fundamental frequency of a free-free panel differs from the resonance frequency of the panel when installed. The damping values of panels installed in the test facility are closer to the damping values obtained with fixed-fixed panels. Effects of damping tape, stiffeners, and bonded and riveted edged conditions were also investigated. Progress in the development of a simple interior noise level control program is reported.

Development of a Bayesian Belief Network Runway Incursion Model

NASA Technical Reports Server (NTRS)

Green, Lawrence L.

2014-01-01

In a previous paper, a statistical analysis of runway incursion (RI) events was conducted to ascertain their relevance to the top ten Technical Challenges (TC) of the National Aeronautics and Space Administration (NASA) Aviation Safety Program (AvSP). The study revealed connections to perhaps several of the AvSP top ten TC. That data also identified several primary causes and contributing factors for RI events that served as the basis for developing a system-level Bayesian Belief Network (BBN) model for RI events. The system-level BBN model will allow NASA to generically model the causes of RI events and to assess the effectiveness of technology products being developed under NASA funding. These products are intended to reduce the frequency of RI events in particular, and to improve runway safety in general. The development, structure and assessment of that BBN for RI events by a Subject Matter Expert panel are documented in this paper.

THE LONG-TERM DYNAMICS OF RACIAL/ETHNIC INEQUALITY IN NEIGHBORHOOD AIR POLLUTION EXPOSURE, 1990-2009.

PubMed

Kravitz-Wirtz, Nicole; Crowder, Kyle; Hajat, Anjum; Sass, Victoria

2016-01-01

Research examining racial/ethnic disparities in pollution exposure often relies on cross-sectional data. These analyses are largely insensitive to exposure trends and rarely account for broader contextual dynamics. To provide a more comprehensive assessment of racial-environmental inequality over time, we combine the 1990 to 2009 waves of the Panel Study of Income Dynamics (PSID) with spatially- and temporally-resolved measures of nitrogen dioxide (NO 2 ) and particulate matter (PM 2.5 and PM 10 ) in respondents' neighborhoods, as well as census data on the characteristics of respondents' metropolitan areas. Results based on multilevel repeated measures models indicate that Blacks and Latinos are, on average, more likely to be exposed to higher levels of NO 2 , PM 2.5 , and PM 10 than Whites. Despite nationwide declines in levels of pollution over time, racial and ethnic disparities persist and cannot be fully explained by individual-, household-, or metropolitan-level factors.

Sleeping money: investigating the huge surpluses of social health insurance in China.

PubMed

Liu, JunQiang; Chen, Tao

2013-12-01

The spreading of social health insurance (SHI) worldwide poses challenges for fledging public administrators. Inefficiency, misuse and even corruption threaten the stewardship of those newly established health funds. This article examines a tricky situation faced by China's largest SHI program: the basic health insurance (BHI) scheme for urban employees. BHI accumulated a 406 billion yuan surplus by 2009, although the reimbursement level was still low. Using a provincial level panel database, we find that the huge BHI surpluses are related to the (temporarily) decreasing dependency ratio, the steady growth of average wages, the extension of BHI coverage, and progress in social insurance agency building. The financial situations of local governments and risk pooling level also matter. Besides, medical savings accounts result in about one third of BHI surpluses. Although these findings are not causal, lessons drawn from this study can help to improve the governance and performance of SHI programs in developing countries.

Family Income and Child Cognitive and Noncognitive Development in Australia: Does Money Matter?

PubMed

Khanam, Rasheda; Nghiem, Son

2016-06-01

This article investigates whether family income affects children's cognitive and noncognitive development by exploiting comprehensive information from the Longitudinal Study of Australian Children. We include variables that represent parental investment, parental stress, and neighborhood characteristics to examine if these factors mediate the effects of income. Using dynamic panel data, we find that family income is significantly associated with children's cognitive skills but not with noncognitive skills. Mother's education, parent's physical and mental health, parenting styles, child's own health, and presence of both biological parents are the most important factors for children's noncognitive development. For cognitive development, income as well as parents' education, child's birth weight, and number of books that children have at home are highly significant factors. We also find strong evidence to support the skill formation theory that children's previous cognitive and noncognitive outcomes are significantly related to their current outcomes.

Evolution of an Implementation-Ready Interprofessional Pain Assessment Reference Model

PubMed Central

Collins, Sarah A; Bavuso, Karen; Swenson, Mary; Suchecki, Christine; Mar, Perry; Rocha, Roberto A.

2017-01-01

Standards to increase consistency of comprehensive pain assessments are important for safety, quality, and analytics activities, including meeting Joint Commission requirements and learning the best management strategies and interventions for the current prescription Opioid epidemic. In this study we describe the development and validation of a Pain Assessment Reference Model ready for implementation on EHR forms and flowsheets. Our process resulted in 5 successive revisions of the reference model, which more than doubled the number of data elements to 47. The organization of the model evolved during validation sessions with panels totaling 48 subject matter experts (SMEs) to include 9 sets of data elements, with one set recommended as a minimal data set. The reference model also evolved when implemented into EHR forms and flowsheets, indicating specifications such as cascading logic that are important to inform secondary use of data. PMID:29854125

Improved imputation accuracy of rare and low-frequency variants using population-specific high-coverage WGS-based imputation reference panel.

PubMed

Mitt, Mario; Kals, Mart; Pärn, Kalle; Gabriel, Stacey B; Lander, Eric S; Palotie, Aarno; Ripatti, Samuli; Morris, Andrew P; Metspalu, Andres; Esko, Tõnu; Mägi, Reedik; Palta, Priit

2017-06-01

Genetic imputation is a cost-efficient way to improve the power and resolution of genome-wide association (GWA) studies. Current publicly accessible imputation reference panels accurately predict genotypes for common variants with minor allele frequency (MAF)≥5% and low-frequency variants (0.5≤MAF<5%) across diverse populations, but the imputation of rare variation (MAF<0.5%) is still rather limited. In the current study, we evaluate imputation accuracy achieved with reference panels from diverse populations with a population-specific high-coverage (30 ×) whole-genome sequencing (WGS) based reference panel, comprising of 2244 Estonian individuals (0.25% of adult Estonians). Although the Estonian-specific panel contains fewer haplotypes and variants, the imputation confidence and accuracy of imputed low-frequency and rare variants was significantly higher. The results indicate the utility of population-specific reference panels for human genetic studies.

Improved imputation accuracy of rare and low-frequency variants using population-specific high-coverage WGS-based imputation reference panel

PubMed Central

Mitt, Mario; Kals, Mart; Pärn, Kalle; Gabriel, Stacey B; Lander, Eric S; Palotie, Aarno; Ripatti, Samuli; Morris, Andrew P; Metspalu, Andres; Esko, Tõnu; Mägi, Reedik; Palta, Priit

2017-01-01

Genetic imputation is a cost-efficient way to improve the power and resolution of genome-wide association (GWA) studies. Current publicly accessible imputation reference panels accurately predict genotypes for common variants with minor allele frequency (MAF)≥5% and low-frequency variants (0.5≤MAF<5%) across diverse populations, but the imputation of rare variation (MAF<0.5%) is still rather limited. In the current study, we evaluate imputation accuracy achieved with reference panels from diverse populations with a population-specific high-coverage (30 ×) whole-genome sequencing (WGS) based reference panel, comprising of 2244 Estonian individuals (0.25% of adult Estonians). Although the Estonian-specific panel contains fewer haplotypes and variants, the imputation confidence and accuracy of imputed low-frequency and rare variants was significantly higher. The results indicate the utility of population-specific reference panels for human genetic studies. PMID:28401899

Beeswax as phase change material to improve solar panel’s performance

NASA Astrophysics Data System (ADS)

Thaib, R.; Rizal, S.; Riza, M.; Mahlia, T. M. I.; Rizal, T. A.

2018-02-01

One of the main obstacles faced during the operation of photovoltaic (PV) panels was overheating due to excessive solar radiation and high ambient temperatures. In this research, investigates the use of beeswax phase change materials (PCM) to maintain the temperature of the panels close to ambient. Solar panels used in this study has 839 mm length, 537 mm wide, and 50 mm thick, with maximum output power at 50 W. During the study, there were two solar panels was evaluated, one without phase change material while the other one was using beeswax phase change material. Solar panels were mounted at 15° slope. Variables observed was the temperature of solar panel’s surface, output voltage and current that produced by PV panels, wind speed around solar panels, and solar radiation. The observation was started at 07:00 am and ended at 06:00 pm. The research shows that maximum temperature of solar panels surface without phase change material is ranging between 46-49 °C, and electrical efficiency is about 7.2-8.8%. Meanwhile, for solar panels with beeswax phase change material, the maximum temperature solar panels surface is relatively low ranging between 33-34 °C, and its electrical efficiency seems to increase about 9.1-9.3%.

Analytical and experimental study of structurally efficient composite hat-stiffened panels loaded in axial compression

NASA Technical Reports Server (NTRS)

Williams, J. G.; Mikulus, M. M., Jr.

1976-01-01

Structural efficiency studies were made to determine the weight saving potential of graphite/epoxy composite structures for compression panel applications. Minimum weight hat-stiffened and open corrugation configurations were synthesized using a nonlinear mathematical programming technique. Selected configurations were built and tested to study local and Euler buckling characteristics. Test results for 23 panels critical in local buckling and six panels critical in Euler buckling are compared with analytical results obtained using the BUCLASP-2 branched plate buckling program. A weight efficiency comparison is made between composite and aluminum compression panels using metal test data generated by the NACA. Theoretical studies indicate that potential weight savings of up to 50% are possible for composite hat-stiffened panels when compared with similar aluminum designs. Weight savings of 32% to 42% were experimentally achieved. Experience suggests that most of the theoretical weight saving potential is available if design deficiencies are eliminated and strict fabrication control is exercised.

Effect of boundary conditions and panel geometry on the response of laminated panels subjected to transverse pressure loads

NASA Technical Reports Server (NTRS)

Jegley, Dawn C.

1993-01-01

The behavior of thin laminated flat and curved panels subjected to transverse pressure and inplane loads is considered. The effects of panel geometry, boundary conditions and laminate stacking sequence on the response of panels subjected to transverse pressure loads up to 12.4 N/sq cm is presented. The response of thin laminated panels is evaluated analytically and selected results are compared with test data. A parametric study of the deformation and strain responses of panels with radius of curvature ranging from 20 to 305 cm is presented. The combination of inplane tensile and pressure loads is also considered.

Numerical simulation of wind loads on solar panels

NASA Astrophysics Data System (ADS)

Su, Kao-Chun; Chung, Kung-Ming; Hsu, Shu-Tsung

2018-05-01

Solar panels mounted on the roof of a building or ground are often vulnerable to strong wind loads. This study aims to investigate wind loads on solar panels using computational fluid dynamic (CFD). The results show good agreement with wind tunnel data, e.g. the streamwise distribution of mean surface pressure coefficient of a solar panel. Wind uplift for solar panels with four aspect ratios is evaluated. The effect of inclined angle and clearance (or height) of a solar panel is addressed. It is found that wind uplift of a solar panel increases when there is an increase in inclined angle and the clearance above ground shows an opposite effect.

Assessment of a Solar Cell Panel Spatial Arrangement Influence on Electricity Generation

NASA Astrophysics Data System (ADS)

Anisimov, I. A.; Burakova, L. N.; Burakova, A. D.; Burakova, O. D.

2017-05-01

The research evaluates the impact of the spatial arrangement of solar cell panels on the amount of electricity generated (power generated by solar cell panel) in Tyumen. Dependences of the power generated by the solar panel on the time of day, air temperature, weather conditions and the spatial arrangement are studied. Formulas for the calculation of the solar cell panel inclination angle which provides electricity to urban infrastructure are offered. Based on the data in the future, changing of inclination angle of solar cell panel will be confirmed experimentally during the year in Tyumen, and recommendations for installing solar cell panels in urban infrastructure will be developed.

Configuration and Sizing of a Test Fixture for Panels Under Combined Loads

NASA Technical Reports Server (NTRS)

Lovejoy, Andrew E.

2006-01-01

Future air and space structures are expected to utilize composite panels that are subjected to combined mechanical loads, such as bi-axial compression/tension, shear and pressure. Therefore, the ability to accurately predict the buckling and strength failures of such panels is important. While computational analysis can provide tremendous insight into panel response, experimental results are necessary to verify predicted performances of these panels to judge the accuracy of computational methods. However, application of combined loads is an extremely difficult task due to the complex test fixtures and set-up required. Presented herein is a comparison of several test set-ups capable of testing panels under combined loads. Configurations compared include a D-box, a segmented cylinder and a single panel set-up. The study primarily focuses on the preliminary sizing of a single panel test configuration capable of testing flat panels under combined in-plane mechanical loads. This single panel set-up appears to be best suited to the testing of both strength critical and buckling critical panels. Required actuator loads and strokes are provided for various square, flat panels.

Personality Measurement and Assessment in Large Panel Surveys*

PubMed Central

Roberts, Brent; Jackson, Joshua J.; Duckworth, Angela L.; Von Culin, Katherine

2013-01-01

Personality tests are being added to large panel studies with increasing regularity, such as the Health and Retirement Study (HRS). To facilitate the inclusion and interpretation of these tests, we provide some general background on personality psychology, personality assessment, and the validity of personality tests. In this review, we provide background on definitions of personality, the strengths and weaknesses of the self-report approaches to personality testing typically used in large panel studies, and the validity of personality tests for three outcomes: genetics, income, and health. We conclude with recommendations on how to improve personality assessment in future panel studies. PMID:23503719

Image quality and radiation dose on digital chest imaging: comparison of amorphous silicon and amorphous selenium flat-panel systems.

PubMed

Bacher, Klaus; Smeets, Peter; Vereecken, Ludo; De Hauwere, An; Duyck, Philippe; De Man, Robert; Verstraete, Koenraad; Thierens, Hubert

2006-09-01

The aim of this study was to compare the image quality and radiation dose in chest imaging using an amorphous silicon flat-panel detector system and an amorphous selenium flat-panel detector system. In addition, the low-contrast performance of both systems with standard and low radiation doses was compared. In two groups of 100 patients each, digital chest radiographs were acquired with either an amorphous silicon or an amorphous selenium flat-panel system. The effective dose of the examination was measured using thermoluminescent dosimeters placed in an anthropomorphic Rando phantom. The image quality of the digital chest radiographs was assessed by five experienced radiologists using the European Guidelines on Quality Criteria for Diagnostic Radiographic Images. In addition, a contrast-detail phantom study was set up to assess the low-contrast performance of both systems at different radiation dose levels. Differences between the two groups were tested for significance using the two-tailed Mann-Whitney test. The amorphous silicon flat-panel system allowed an important and significant reduction in effective dose in comparison with the amorphous selenium flat-panel system (p < 0.0001) for both the posteroanterior and lateral views. In addition, clinical image quality analysis showed that the dose reduction was not detrimental to image quality. Compared with the amorphous selenium flat-panel detector system, the amorphous silicon flat-panel detector system performed significantly better in the low-contrast phantom study, with phantom entrance dose values of up to 135 muGy. Chest radiographs can be acquired with a significantly lower patient radiation dose using an amorphous silicon flat-panel system than using an amorphous selenium flat-panel system, thereby producing images that are equal or even superior in quality to those of the amorphous selenium flat-panel detector system.

A Systematic Review and Meta-analysis of the Diagnostic Accuracy of Prostate Health Index and 4-Kallikrein Panel Score in Predicting Overall and High-grade Prostate Cancer.

PubMed

Russo, Giorgio Ivan; Regis, Federica; Castelli, Tommaso; Favilla, Vincenzo; Privitera, Salvatore; Giardina, Raimondo; Cimino, Sebastiano; Morgia, Giuseppe

2017-08-01

Markers for prostate cancer (PCa) have progressed over recent years. In particular, the prostate health index (PHI) and the 4-kallikrein (4K) panel have been demonstrated to improve the diagnosis of PCa. We aimed to review the diagnostic accuracy of PHI and the 4K panel for PCa detection. We performed a systematic literature search of PubMed, EMBASE, Cochrane, and Academic One File databases until July 2016. We included diagnostic accuracy studies that used PHI or 4K panel for the diagnosis of PCa or high-grade PCa. The methodological quality was assessed using the Quality Assessment of Diagnostic Accuracy Studies (QUADAS-2) tool. Twenty-eight studies including 16,762 patients have been included for the analysis. The pooled data showed a sensitivity of 0.89 and 0.74 for PHI and 4K panel, respectively, for PCa detection and a pooled specificity of 0.34 and 0.60 for PHI and 4K panel, respectively. The derived area under the curve (AUC) from the hierarchical summary receiver operating characteristic (HSROC) showed an accuracy of 0.76 and 0.72 for PHI and 4K panel respectively. For high-grade PCa detection, the pooled sensitivity was 0.93 and 0.87 for PHI and 4K panel, respectively, whereas the pooled specificity was 0.34 and 0.61 for PHI and 4K panel, respectively. The derived AUC from the HSROC showed an accuracy of 0.82 and 0.81 for PHI and 4K panel, respectively. Both PHI and the 4K panel provided good diagnostic accuracy in detecting overall and high-grade PCa. Copyright © 2016 Elsevier Inc. All rights reserved.

Simulating Halos with the Caterpillar Project

NASA Astrophysics Data System (ADS)

Kohler, Susanna

2016-04-01

The Caterpillar Project is a beautiful series of high-resolution cosmological simulations. The goal of this project is to examine the evolution of dark-matter halos like the Milky Ways, to learn about how galaxies like ours formed. This immense computational project is still in progress, but the Caterpillar team is already providing a look at some of its first results.Lessons from Dark-Matter HalosWhy simulate the dark-matter halos of galaxies? Observationally, the formation history of our galaxy is encoded in galactic fossil record clues, like the tidal debris from disrupted satellite galaxies in the outer reaches of our galaxy, or chemical abundance patterns throughout our galactic disk and stellar halo.But to interpret this information in a way that lets us learn about our galaxys history, we need to first test galaxy formation and evolution scenarios via cosmological simulations. Then we can compare the end result of these simulations to what we observe today.This figure illustrates the difference that mass resolution makes. In the left panel, the mass resolution is 1.5*10^7 solar masses per particle. In the right panel, the mass resolution is 3*10^4 solar masses per particle [Griffen et al. 2016]A Computational ChallengeDue to how computationally expensive such simulations are, previous N-body simulations of the growth of Milky-Way-like halos have consisted of only one or a few halos each. But in order to establish a statistical understanding of how galaxy halos form and find out whether the Milky Ways halo is typical or unusual! it is necessary to simulate a larger number of halos.In addition, in order to accurately follow the formation and evolution of substructure within the dark-matter halos, these simulations must be able to resolve the smallest dwarf galaxies, which are around a million solar masses. This requires an extremely high mass resolution, which adds to the computational expense of the simulation.First OutcomesThese are the challenges faced by the Caterpillar Project, detailed in a recently published paper led by Brendan Griffen (Massachusetts Institute of Technology). The Caterpillar Project was designed to simulate 70 Milky-Way-size halos (quadrupling the total number of halos that have been simulated in the past!) at a high mass resolution (10,000 solar masses per particle) and time resolution (5 Myr per snapshot). The project is extremely computationally intense, requiring 14 million CPU hours and 700 TB of data storage!Mass evolution of the first 24 Caterpillar halos (selected to be Milky-Way-size at z=0). The inset panel shows the mass evolution normalized by the halo mass at z=0, demonstrating the highly varied evolution these different halos undergo. [Griffen et al. 2016]In this first study, the Griffen and collaboratorsshow the end states for the first 24 halos of the project, evolved from a large redshift to today (z=0). They use these initialresults to demonstrate the integrity of their data and the utility of their methods, which include new halo-finding techniques that recover more substructure within each halo.The first results from the Caterpillar Project are already enough to show clear general trends, such as the highly variable paths the different halos take as they merge, accrete, and evolve, as well as how different their ends states can be. Statistically examining the evolution of these halos is an importantnext step in providinginsight intothe origin and evolution of the Milky Way, and helping us to understand how our galaxy differs from other galaxies of similar mass. Keep an eye out for future results from this project!BonusCheck out this video (make sure to watch in HD!) of how the first 24 Milky-Way-like halos from the Caterpillar simulations form. Seeingthese halos evolve simultaneously is an awesome way to identifythe similarities and differences between them.CitationBrendan F. Griffen et al 2016 ApJ 818 10. doi:10.3847/0004-637X/818/1/10

The relationship between air pollution, fossil fuel energy consumption, and water resources in the panel of selected Asia-Pacific countries.

PubMed

Rafindadi, Abdulkadir Abdulrashid; Yusof, Zarinah; Zaman, Khalid; Kyophilavong, Phouphet; Akhmat, Ghulam

2014-10-01

The objective of the study is to examine the relationship between air pollution, fossil fuel energy consumption, water resources, and natural resource rents in the panel of selected Asia-Pacific countries, over a period of 1975-2012. The study includes number of variables in the model for robust analysis. The results of cross-sectional analysis show that there is a significant relationship between air pollution, energy consumption, and water productivity in the individual countries of Asia-Pacific. However, the results of each country vary according to the time invariant shocks. For this purpose, the study employed the panel least square technique which includes the panel least square regression, panel fixed effect regression, and panel two-stage least square regression. In general, all the panel tests indicate that there is a significant and positive relationship between air pollution, energy consumption, and water resources in the region. The fossil fuel energy consumption has a major dominating impact on the changes in the air pollution in the region.

Response problems in a vacation panel study

Treesearch

Christine A. Vogt; Susan I. Stewart

2001-01-01

This paper investigates response problems encountered in a panel study of travel behavior. Though the overall response rate to the three-wave panel study was acceptable (over 60%), three types of response problems were encountered: refusal, non-response, and attrition. In a follow-up phone survey, a sample of individuals from each problem response group was questioned...

Prevalence of financial conflicts of interest among panel members producing clinical practice guidelines in Canada and United States: cross sectional study.

PubMed

Neuman, Jennifer; Korenstein, Deborah; Ross, Joseph S; Keyhani, Salomeh

2011-10-11

To determine the prevalence of financial conflicts of interest among members of panels producing clinical practice guidelines on screening, treatment, or both for hyperlipidaemia or diabetes. Cross sectional study. Relevant guidelines published by national organisations in the United States and Canada between 2000 and 2010. Members of guideline panels. Prevalence of financial conflicts of interest among members of guideline panels and chairs of panels. Fourteen guidelines met our search criteria, of which five had no accompanying declaration of conflicts of interest by panel members. 288 panel members had participated in the guideline development process. Among the 288 panel members, 138 (48%) reported conflicts of interest at the time of the publication of the guideline and 150 (52%) either stated that they had no such conflicts or did not have an opportunity to declare any. Among 73 panellists who formally declared no conflicts, 8 (11%) were found to have one or more. Twelve of the 14 guideline panels evaluated identified chairs, among whom six had financial conflicts of interest. Overall, 150 (52%) panel members had conflicts, of which 138 were declared and 12 were undeclared. Panel members from government sponsored guidelines were less likely to have conflicts of interest compared with guidelines sponsored by non-government sources (15/92 (16%) v 135/196 (69%); P<0.001). The prevalence of financial conflicts of interest and their under-reporting by members of panels producing clinical practice guidelines on hyperlipidaemia or diabetes was high, and a relatively high proportion of guidelines did not have public disclosure of conflicts of interest. Organisations that produce guidelines should minimise conflicts of interest among panel members to ensure the credibility and evidence based nature of the guidelines' content.

Panels of HIV-1 Subtype C Env Reference Strains for Standardized Neutralization Assessments

DOE PAGES

Hraber, Peter; Rademeyer, Cecilia; Williamson, Carolyn; ...

2017-07-26

In the search for effective immunologic interventions to prevent and treat HIV-1 infection, standardized reference reagents are a cost-effective way to maintain robustness and reproducibility among immunological assays. To support planned and ongoing studies where clade C predominates, here we describe three virus panels, chosen from 200 well-characterized clade C envelope (Env)-pseudotyped viruses from early infection. All 200 Envs were expressed as a single round of replication pseudoviruses and were tested to quantify neutralization titers by 16 broadly neutralizing antibodies (bnAbs) and sera from 30 subjects with chronic clade C infections. We selected large panels of 50 and 100 Envsmore » either to characterize cross-reactive breadth for sera identified as having potent neutralization activity based on initial screening or to evaluate neutralization magnitude-breadth distributions of newly isolated antibodies. We identified these panels by downselection after hierarchical clustering of bnAb neutralization titers. The resulting panels represent the diversity of neutralization profiles throughout the range of virus sensitivities identified in the original panel of 200 viruses. A small 12-Env panel was chosen to screen sera from vaccine trials or natural-infection studies for neutralization responses. We considered panels selected by previously described methods but favored a computationally informed method that enabled selection of viruses representing diverse neutralization sensitivity patterns, given that we do nota prioriknow what the neutralization-response profile of vaccine sera will be relative to that of sera from infected individuals. The resulting 12-Env panel complements existing panels. Use of standardized panels enables direct comparisons of data from different trials and study sites testing HIV-1 clade C-specific products. HIV-1 group M includes nine clades and many recombinants. Clade C is the most common lineage, responsible for roughly half of current HIV-1 infections, and is a focus for vaccine design and testing. Standard reference reagents, particularly virus panels to study neutralization by antibodies, are crucial for developing cost-effective and yet rigorous and reproducible assays against diverse examples of this variable virus. We developed clade C-specific panels for use as standardized reagents to monitor complex polyclonal sera for neutralization activity and to characterize the potency and breadth of cross-reactive neutralization by monoclonal antibodies, whether engineered or isolated from infected individuals. We chose from 200 southern African, clade C envelope-pseudotyped viruses with neutralization titers against 16 broadly neutralizing antibodies and 30 sera from chronic clade C infections. We selected panels to represent the diversity of bnAb neutralization profiles and Env neutralization sensitivities. Finally, use of standard virus panels can facilitate comparison of results across studies and sites.« less

Panels of HIV-1 Subtype C Env Reference Strains for Standardized Neutralization Assessments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hraber, Peter; Rademeyer, Cecilia; Williamson, Carolyn

In the search for effective immunologic interventions to prevent and treat HIV-1 infection, standardized reference reagents are a cost-effective way to maintain robustness and reproducibility among immunological assays. To support planned and ongoing studies where clade C predominates, here we describe three virus panels, chosen from 200 well-characterized clade C envelope (Env)-pseudotyped viruses from early infection. All 200 Envs were expressed as a single round of replication pseudoviruses and were tested to quantify neutralization titers by 16 broadly neutralizing antibodies (bnAbs) and sera from 30 subjects with chronic clade C infections. We selected large panels of 50 and 100 Envsmore » either to characterize cross-reactive breadth for sera identified as having potent neutralization activity based on initial screening or to evaluate neutralization magnitude-breadth distributions of newly isolated antibodies. We identified these panels by downselection after hierarchical clustering of bnAb neutralization titers. The resulting panels represent the diversity of neutralization profiles throughout the range of virus sensitivities identified in the original panel of 200 viruses. A small 12-Env panel was chosen to screen sera from vaccine trials or natural-infection studies for neutralization responses. We considered panels selected by previously described methods but favored a computationally informed method that enabled selection of viruses representing diverse neutralization sensitivity patterns, given that we do nota prioriknow what the neutralization-response profile of vaccine sera will be relative to that of sera from infected individuals. The resulting 12-Env panel complements existing panels. Use of standardized panels enables direct comparisons of data from different trials and study sites testing HIV-1 clade C-specific products. HIV-1 group M includes nine clades and many recombinants. Clade C is the most common lineage, responsible for roughly half of current HIV-1 infections, and is a focus for vaccine design and testing. Standard reference reagents, particularly virus panels to study neutralization by antibodies, are crucial for developing cost-effective and yet rigorous and reproducible assays against diverse examples of this variable virus. We developed clade C-specific panels for use as standardized reagents to monitor complex polyclonal sera for neutralization activity and to characterize the potency and breadth of cross-reactive neutralization by monoclonal antibodies, whether engineered or isolated from infected individuals. We chose from 200 southern African, clade C envelope-pseudotyped viruses with neutralization titers against 16 broadly neutralizing antibodies and 30 sera from chronic clade C infections. We selected panels to represent the diversity of bnAb neutralization profiles and Env neutralization sensitivities. Finally, use of standard virus panels can facilitate comparison of results across studies and sites.« less

Analysis and Tests of Reinforced Carbon-Epoxy/Foam-Core Sandwich Panels with Cutouts

NASA Technical Reports Server (NTRS)

Baker, Donald J.; Rogers, Charles

1996-01-01

The results of a study of a low-cost structurally efficient minimum-gage shear-panel design that can be used in light helicopters are presented. The shear-panel design is based on an integrally stiffened syntactic-foam stabilized-skin with an all-bias-ply tape construction for stabilized-skin concept with an all-bias-ply tape construction for the skins. This sandwich concept is an economical way to increase the panel bending stiffness weight penalty. The panels considered in the study were designed to be buckling resistant up to 100 lbs/in. of shear load and to have an ultimate strength of 300 lbs/in. The panel concept uses unidirectional carbon-epoxy tape on a syntactic adhesive as a stiffener that is co-cured with the skin and is an effective concept for improving panel buckling strength. The panel concept also uses pultruded carbon-epoxy rods embedded in a syntactic adhesive and over-wrapped with a bias-ply carbon-epoxy tape to form a reinforcing beam which is an effective method for redistributing load around rectangular cutout. The buckling strength of the reinforced panels is 83 to 90 percent of the predicted buckling strength based on a linear buckling analysis. The maximum experimental deflection exceeds the maximum deflection predicted by a nonlinear analysis by approximately one panel thickness. The failure strength of the reinforced panels was two and a half to seven times of the buckling strength. This efficient shear-panel design concept exceeds the required ultimate strength requirement of 300 lbs/in by more than 100 percent.

A panel study of airborne particulate matter concentration and impaired cardiopulmonary function in young adults by two different exposure measurement

NASA Astrophysics Data System (ADS)

Hu, Li-Wen; Qian, Zhengmin (Min); Bloom, Michael S.; Nelson, Erik J.; Liu, Echu; Han, Bin; Zhang, Nan; Liu, Yimin; Ma, Huimin; Chen, Duo-Hong; Yang, Bo-Yi; Zeng, Xiao-Wen; Chen, Wen; Komppula, Mika; Leskinen, Ari; Hirvonen, Maija-Riitta; Roponen, Marjut; Jalava, Pasi; Bai, Zhipeng; Dong, Guang-Hui

2018-05-01

This study sought to clarify the correlation of individual exposure measurements and PM2.5 measurements collected at regulatory monitoring sites in short-term panel study settings. To achieve this goal, 30 young, healthy adult participants were assigned to three groups with 4 samplers in each group to collect individual exposures during four weekends in March 2016. Participants also completed cardiopulmonary function tests during the same periods. For comparison, ambient air pollution data were obtained from the Air Pollution Surveillance Network in Guangzhou, China. The 8-h ambient pollutant averages and group sampler concentrations were used as separate indicators of air pollution exposure. Results showed that the 8-h mean concentration of personal PM2.5 exposure was 65.09 ± 22.18 μg/m3, which was 24.34 μg/m3 statistically higher than the ambient concentrations over the same period (p < 0.05). However, these concentrations were strongly correlated (Spearman's r = 0.937, p < 0.01). Separate mixed-effect models were fit for ambient and personal exposures to estimate their associations with cardiopulmonary outcomes. Higher PM2.5 and PM10 exposures were related to lower lung function of maximal mid-expiratory flow (MMEF). A 10 μg/m3 higher PM was associated with 0.11 L/S to 0.52 L/S lower MMEF. No effects on cardiovascular function were found. In conclusion, personal PM2.5 exposure might be higher than ambient concentrations. Young, healthy adults in urban areas may experience reduced lung function (lower MMEF), even after just 8 h of exposure to PM2.5 and PM10.

Effects of Asian dust on daily cough occurrence in patients with chronic cough: A panel study

NASA Astrophysics Data System (ADS)

Higashi, Tomomi; Kambayashi, Yasuhiro; Ohkura, Noriyuki; Fujimura, Masaki; Nakai, Satoshi; Honda, Yasushi; Saijoh, Kiyofumi; Hayakawa, Kazuichi; Kobayashi, Fumihisa; Michigami, Yoshimasa; Olando, Anyenda Enoch; Hitomi, Yoshiaki; Nakamura, Hiroyuki

2014-08-01

Asian dust, known as kosa in Japanese, is a major public health concern. In this panel study, we evaluated the effects of exposure to kosa on daily cough occurrence. The study subjects were 86 patients being treated for asthma, cough variant asthma, or atopic cough in Kanazawa University Hospital from January 2011 to June 2011. Daily mean concentrations of kosa and spherical particles were obtained from light detection and ranging (LIDAR) measurements, and were categorized from Grade 1 (0 μg/m3) to 5 (over 100 μg/m3). The association between kosa and cough was analyzed by logistic regression with a generalized estimating equation. Kosa effects on cough were seen for all Grades with potential time lag effect. Particularly at Lag 0 (the day of exposure), a dose-response relationship was observed: the odds ratios for Grades 2, 3, 4, and 5 above the referent (Grade 1) were 1.111 (95% confidence interval (CI): 0.995-1.239), 1.171 (95% CI: 1.006-1.363), 1.357 (95% CI: 1.029-1.788), and 1.414 (95% CI: 0.983-2.036), respectively. Among the patients without asthma, the association was higher: the odds ratios for Grades 2, 3, 4 and 5 were 1.223 (95% CI: 0.999-1.497), 1.309 (95% CI: 0.987-1.737), 1.738 (95% CI: 1.029-2.935) and 2.403 (95% CI: 1.158-4.985), respectively. These associations remained after adjusting for the concentration of spherical particles or particulate matter with an aerodynamic diameter of less than 2.5 μm (PM2.5). Our findings demonstrate that kosa is an environmental factor which induces cough in a dose-response relationship.

Reprint of: Effects of Asian dust on daily cough occurrence in patients with chronic cough: A panel study

NASA Astrophysics Data System (ADS)

Higashi, Tomomi; Kambayashi, Yasuhiro; Ohkura, Noriyuki; Fujimura, Masaki; Nakai, Satoshi; Honda, Yasushi; Saijoh, Kiyofumi; Hayakawa, Kazuichi; Kobayashi, Fumihisa; Michigami, Yoshimasa; Olando, Anyenda Enoch; Hitomi, Yoshiaki; Nakamura, Hiroyuki

2014-11-01

Asian dust, known as kosa in Japanese, is a major public health concern. In this panel study, we evaluated the effects of exposure to kosa on daily cough occurrence. The study subjects were 86 patients being treated for asthma, cough variant asthma, or atopic cough in Kanazawa University Hospital from January 2011 to June 2011. Daily mean concentrations of kosa and spherical particles were obtained from light detection and ranging (LIDAR) measurements, and were categorized from Grade 1 (0 μg/m3) to 5 (over 100 μg/m3). The association between kosa and cough was analyzed by logistic regression with a generalized estimating equation. Kosa effects on cough were seen for all Grades with potential time lag effect. Particularly at Lag 0 (the day of exposure), a dose-response relationship was observed: the odds ratios for Grades 2, 3, 4, and 5 above the referent (Grade 1) were 1.111 (95% confidence interval (CI): 0.995-1.239), 1.171 (95% CI: 1.006-1.363), 1.357 (95% CI: 1.029-1.788), and 1.414 (95% CI: 0.983-2.036), respectively. Among the patients without asthma, the association was higher: the odds ratios for Grades 2, 3, 4 and 5 were 1.223 (95% CI: 0.999-1.497), 1.309 (95% CI: 0.987-1.737), 1.738 (95% CI: 1.029-2.935) and 2.403 (95% CI: 1.158-4.985), respectively. These associations remained after adjusting for the concentration of spherical particles or particulate matter with an aerodynamic diameter of less than 2.5 μm (PM2.5). Our findings demonstrate that kosa is an environmental factor which induces cough in a dose-response relationship.

The Impact of Air Pollution, Including Asian Sand Dust, on Respiratory Symptoms and Health-related Quality of Life in Outpatients With Chronic Respiratory Disease in Korea: A Panel Study.

PubMed

Nakao, Motoyuki; Ishihara, Yoko; Kim, Cheol-Hong; Hyun, In-Gyu

2018-05-01

Air pollution is a growing concern in Korea because of transboundary air pollution from mainland China. A panel study was conducted to clarify the effects of air pollution on respiratory symptoms and health-related quality of life (HR-QoL) in outpatients with and without chronic obstructive pulmonary disease (COPD) in Korea. Patients filled out a questionnaire including self-reported HR-QoL in February and were followed up in May and July. The study was conducted from 2013 to 2015, with different participants each year. Air quality parameters were applied in a generalized estimating equation as independent variables to predict factors affecting HR-QoL. Lower physical fitness scores were associated with Asian sand dust events. Daily activity scores were worse when there were high concentrations of particulate matter (PM) less than 10 μm in diameter (PM 10 ). Lower social functioning scores were associated with high PM less than 2.5 μm in diameter and nitrogen dioxide (NO 2 ) concentrations. High NO 2 concentrations also showed a significant association with mental health scores. Weather-related cough was prevalent when PM 10 , NO 2 , or ozone (O 3 ) concentrations were high, regardless of COPD severity. High PM 10 concentrations were associated with worsened wheezing, particularly in COPD patients. The results suggest that PM, NO 2 , and O 3 cause respiratory symptoms leading to HR-QoL deterioration. While some adverse effects of air pollution appeared to occur regardless of COPD, others occurred more often and more intensely in COPD patients. The public sector, therefore, needs to consider tailoring air pollution countermeasures to people with different conditions to minimize adverse health effects.

A Mesh Refinement Study on the Impact Response of a Shuttle Leading-Edge Panel Finite Element Simulation

NASA Technical Reports Server (NTRS)

Fasanella, Edwin L.; Jackson, Karen E.; Lyle, Karen H.; Spellman, Regina L.

2006-01-01

A study was performed to examine the influence of varying mesh density on an LS-DYNA simulation of a rectangular-shaped foam projectile impacting the space shuttle leading edge Panel 6. The shuttle leading-edge panels are fabricated of reinforced carbon-carbon (RCC) material. During the study, nine cases were executed with all possible combinations of coarse, baseline, and fine meshes of the foam and panel. For each simulation, the same material properties and impact conditions were specified and only the mesh density was varied. In the baseline model, the shell elements representing the RCC panel are approximately 0.2-in. on edge, whereas the foam elements are about 0.5-in. on edge. The element nominal edge-length for the baseline panel was halved to create a fine panel (0.1-in. edge length) mesh and doubled to create a coarse panel (0.4-in. edge length) mesh. In addition, the element nominal edge-length of the baseline foam projectile was halved (0.25-in. edge length) to create a fine foam mesh and doubled (1.0-in. edge length) to create a coarse foam mesh. The initial impact velocity of the foam was 775 ft/s. The simulations were executed in LS-DYNA for 6 ms of simulation time. Contour plots of resultant panel displacement and effective stress in the foam were compared at four discrete time intervals. Also, time-history responses of internal and kinetic energy of the panel, kinetic and hourglass energy of the foam, and resultant contact force were plotted to determine the influence of mesh density.

The Dynamic Interplay among Maternal Empathy, Quality of Mother-Adolescent Relationship, and Adolescent Antisocial Behaviors: New Insights from a Six-Wave Longitudinal Multi-Informant Study

PubMed Central

Crocetti, Elisabetta; Moscatelli, Silvia; Van der Graaff, Jolien; Keijsers, Loes; van Lier, Pol; Koot, Hans M.; Rubini, Monica; Meeus, Wim; Branje, Susan

2016-01-01

Adolescents’ behavior is often a matter of concern, given their increased likelihood of enacting antisocial behaviors, which cause disruptions in the social order and are potentially harmful for the adolescents themselves and for the people around them. In this six-wave longitudinal study we sought to examine the interplay among maternal empathy, multiple indicators of mother-adolescent relationship quality (i.e., balanced relatedness, conflict, and support), and adolescent antisocial behaviors rated both by adolescents and their mothers. Participants for the current study were 497 Dutch adolescents (56.9% males) followed from age 13 to 18, and their mothers. A series of cross-lagged panel models revealed reciprocal associations between maternal empathy and mother-adolescent relationship quality and between mother-adolescent relationship quality and adolescent antisocial behaviors. Interestingly, we also found some indirect effects of adolescent antisocial behaviors on maternal empathy mediated by mother-adolescent relationship quality. Overall, this study further highlights a process of reciprocal influences within mother-adolescent dyads. PMID:26990191

Mineral Resources and the Environment.

ERIC Educational Resources Information Center

National Academy of Sciences, Washington, DC.

This report presents the findings and recommendations of panels created by the Committee on Mineral Resources and the Environment (COMRATE) to study four topic areas of mineral resources and the environment. The topic areas studied by the panels were: technology, supply, the environment, and demand. Section I, the report of the technology panel,…

Does capitation matter? Impacts on access, use, and quality.

PubMed

Zuvekas, Samuel H; Hill, Steven C

2004-01-01

Provider capitation may constrain costs, but it also may reduce access and quality of care. We examine the impacts of capitating the usual source of care of enrollees in health maintenance organizations (HMOs). We account for the endogeneity of capitation and other characteristics using generalized methods of moments (GMM) estimation on a sample from the Medical Expenditure Panel Survey for 1996 and 1997. Being organized as a group/staff HMO generally has stronger impact on access and quality than capitation. Capitation by itself may increase access to consumers' usual sources of care, improve primary preventive care, and reduce coordination, but estimates with GMM were not statistically significant.

Proceedings of the Conference on Coal Use for California

NASA Technical Reports Server (NTRS)

1978-01-01

The papers, statements, and panel session transcriptions that resulted from the conference are presented. The conference brought together approximately 400 specialists, students, interest groups and general public for the examination of technological, institutional, and social issues surrounding coal use for California and the identification of attendant constraints, impediments, advantages, and target opportunities. The expertise of the participants cover a wide range of subject matter that includes systems examination of coal opportunities, energy demand forecasting, environmental aspects of coal use, coal supply and transport, viewpoint of neighboring states, air pollution control, direct firing, coal gasification and liquefaction technologies, economics of coal use, and the regulatory system.

Acoustic testing of high temperature panels

NASA Technical Reports Server (NTRS)

Leatherwood, Jack D.; Clevenson, Sherman A.; Powell, Clemans A.; Daniels, Edward F.

1990-01-01

Results are presented of a series of thermal-acoustic tests conducted on the NASA Langley Research Center Thermal-Acoustic Test Apparatus to (1) investigate techniques for obtaining strain measurements on metallic and carbon-carbon materials at elevated temperature; (2) document the dynamic strain response characteristics of several superalloy honeycomb thermal protection system panels at elevated temperatures of up to 1200 F; and (3) determine the strain response and sonic fatigue behavior of four carbon-carbon panels at both ambient and elevated temperatures. A second study tested four carbon-carbon panels to document panel dynamic response characteristics at ambient and elevated temperature, determine time to failure and faliure modes, and collect continuous strain data up to panel failure. Strain data are presented from both types of panels, and problems encountered in obtaining reliable strain data on the carbon-carbon panels are described. The failure modes of the carbon-carbon panels are examined.

An evaluation of indoor and outdoor biological particulate matter

NASA Astrophysics Data System (ADS)

Menetrez, M. Y.; Foarde, K. K.; Esch, R. K.; Schwartz, T. D.; Dean, T. R.; Hays, M. D.; Cho, S. H.; Betancourt, D. A.; Moore, S. A.

The incidences of allergies, allergic diseases and asthma are increasing world wide. Global climate change is likely to impact plants and animals, as well as microorganisms. The World Health Organization, U.S. Environmental Protection Agency, U.S. Department of Agriculture, U.S. Department of Health and Human Services, and the Intergovernmental Panel on Climate Change cite increased allergic reactions due to climate change as a growing concern. Monitoring of indoor and ambient particulate matter (PM) and the characterization of the content for biological aerosol concentrations has not been extensively performed. Samples from urban and rural North Carolina (NC), and Denver (CO), were collected and analyzed as the goal of this research. A study of PM 10 (<10 μm in aerodynamic diameter) and PM 2.5 (<2.5 μm in aerodynamic diameter) fractions of ambient bioaerosols was undertaken for a six month period to evaluate the potential for long-term concentrations. These airborne bioaerosols can induce irritational, allergic, infectious, and chemical responses in exposed individuals. Three separate sites were monitored, samples were collected and analyzed for mass and biological content (endotoxins, (1,3)-β- D-glucan and protein). Concentrations of these bioaerosols were reported as a function of PM size fraction, mass and volume of air sampled. The results indicated that higher concentrations of biologicals were present in PM 10 than were present in PM 2.5, except when near-roadway conditions existed. This study provides the characterization of ambient bioaerosol concentrations in a variety of areas and conditions.

Do Social Networks Improve Chinese Adults’ Subjective Well-being?

PubMed Central

Lei, Xiaoyan; Shen, Yan; Smith, James P.; Zhou, Guangsu

2015-01-01

This paper studies relationships between social networks, health and subjective well-being (SWB) using nationally representative data of the Chinese Population—the Chinese Family Panel Studies (CFPS). Our data contain SWB indicators in two widely used variants—happiness and life-satisfaction. Social network variables used include kinship relationships measured by marital status, family size, and having a genealogy; ties with friends/relatives/neighbors measured by holiday visitation, frequency of contacts, and whether and value gifts given and received; total number and time spent in social activities, and engagement in organizations including the communist party, religious groups, and other types. We find that giving and receiving gifts has a larger impact on SWB than either just giving or receiving them. Similarly the number of friends is more important than number of relatives, and marriage is associated with higher levels of SWB. Time spent in social activities and varieties of activities both matter for SWB but varieties matter more. Participation in organizations is associated with higher SWB across such diverse groups as being a member of the communist party or a religious organization. China represents an interesting test since it is simultaneously a traditional society with long-established norms about appropriate social networks and a rapidly changing society due to substantial economic and demographic changes. We find that it is better to both give and receive, to engage in more types of social activities, and that participation in groups all improve well-being of Chinese people. PMID:26644993

3D Modelling of Urban Terrain (Modelisation 3D de milieu urbain)

DTIC Science & Technology

2011-09-01

Panel • IST Information Systems Technology Panel • NMSG NATO Modelling and Simulation Group • SAS System Analysis and Studies Panel • SCI... Systems Concepts and Integration Panel • SET Sensors and Electronics Technology Panel These bodies are made up of national representatives as well as...of a part of it may be made for individual use only. The approval of the RTA Information Management Systems Branch is required for more than one

Heat pipe thermal conditioning panel

NASA Technical Reports Server (NTRS)

Saaski, E. W.; Loose, J. D.; Mccoy, K. E.

1974-01-01

Thermal control of electronic hardware and experiments on future space vehicles is critical to proper functioning and long life. Thermal conditioning panels (cold plates) are a baseline control technique in current conceptual studies. Heat generating components mounted on the panels are typically cooled by fluid flowing through integral channels within the panel. However, replacing the pumped fluid coolant loop within the panel with heat pipes offers attractive advantages in weight, reliability, and installation. This report describes the development and fabrication of two large 0.76 x 0.76 m heat pipe thermal conditioning panels to verify performance and establish the design concept.

Optimization of composite sandwich cover panels subjected to compressive loadings

NASA Technical Reports Server (NTRS)

Cruz, Juan R.

1991-01-01

An analysis and design method is presented for the design of composite sandwich cover panels that includes transverse shear effects and damage tolerance considerations. This method is incorporated into an optimization program called SANDOP (SANDwich OPtimization). SANDOP is used in the present study to design optimized composite sandwich cover panels for transport aircraft wing applications as a demonstration of its capabilities. The results of this design study indicate that optimized composite sandwich cover panels have approximately the same structural efficiency as stiffened composite cover panels designed to identical constraints. Results indicate that inplane stiffness requirements have a large effect on the weight of these composite sandwich cover panels at higher load levels. Increasing the maximum allowable strain and the upper percentage limit of the 0 degree and plus or minus 45 degree plies can yield significant weight savings. The results show that the structural efficiency of these optimized composite sandwich cover panels is relatively insensitive to changes in core density.

Study of noise reduction characteristics of double-wall panels

NASA Technical Reports Server (NTRS)

Navaneethan, R.; Quayle, B.; Stevenson, S.; Graham, M.

1983-01-01

The noise reduction characteristics of general aviation type, flat, double-wall structures were investigated. The experimental study was carried out on 20-by-20 inch panels with an exposed area of 18 by 18 inches. A frequency range from 20 to 5000 Hz was covered. The experimental results, in general, follow the expected trends. At low frequencies the double-wall structures are no better than the single-wall structures. However, for depths normally used in the general aviation industry, the double-wall panels are very attractive. The graphite-spoxy skin panels have higher noise reduction at very low frequencies ( 100 Hz) than the Kevlar skin panels. But the aluminum panels have higher noise reduction in the high frequency region, due to their greater mass. Use of fiberglass insulation is not effective in the low frequency region, and at times it is even negative. But the insulation is effective in the high-frequency region. The theoretical model for predicting the transmission loss of these multilayered panels is also discussed.

Study of noise reduction characteristics of double-wall panels

NASA Astrophysics Data System (ADS)

Navaneethan, R.; Quayle, B.; Stevenson, S.; Graham, M.

1983-05-01

The noise reduction characteristics of general aviation type, flat, double-wall structures were investigated. The experimental study was carried out on 20-by-20 inch panels with an exposed area of 18 by 18 inches. A frequency range from 20 to 5000 Hz was covered. The experimental results, in general, follow the expected trends. At low frequencies the double-wall structures are no better than the single-wall structures. However, for depths normally used in the general aviation industry, the double-wall panels are very attractive. The graphite-spoxy skin panels have higher noise reduction at very low frequencies ( 100 Hz) than the Kevlar skin panels. But the aluminum panels have higher noise reduction in the high frequency region, due to their greater mass. Use of fiberglass insulation is not effective in the low frequency region, and at times it is even negative. But the insulation is effective in the high-frequency region. The theoretical model for predicting the transmission loss of these multilayered panels is also discussed.

Aerospace Safety Advisory Panel

NASA Technical Reports Server (NTRS)

1993-01-01

The Aerospace Safety Advisory Panel (ASAP) provided oversight on the safety aspects of many NASA programs. In addition, ASAP undertook three special studies. At the request of the Administrator, the panel assessed the requirements for an assured crew return vehicle (ACRV) for the space station and reviewed the organization of the safety and mission quality function within NASA. At the behest of Congress, the panel formed an independent, ad hoc working group to examine the safety and reliability of the space shuttle main engine. Section 2 presents findings and recommendations. Section 3 consists of information in support of these findings and recommendations. Appendices A, B, C, and D, respectively, cover the panel membership, the NASA response to the findings and recommendations in the March 1992 report, a chronology of the panel's activities during the reporting period, and the entire ACRV study report.

Design of a DNA panel for genomic studies in Russian cattle breeds

USDA-ARS?s Scientific Manuscript database

A panel of 96 DNA samples (Russian Cattle Genomic Diversity Panel 1.0 or RCGDP 1.0) characterizing the breadth of genetic diversity in popular Russian cattle breeds was designed. The panel contains from four to eight animals from each of 11 dairy and six dairy-meat and meat breeds. The main criterio...

Buckling Behavior of Compression-Loaded Quasi-Isotropic Curved Panels with a Circular Cutout

NASA Technical Reports Server (NTRS)

Hilburger, Mark W.; Britt, Vicki O.; Nemeth, Michael P.

1999-01-01

Results from a numerical and experimental study of the response of compression-loaded quasi-isotropic curved panels with a centrally located circular cutout are presented. The numerical results were obtained by using a geometrically nonlinear finite element analysis code. The effects of cutout size, panel curvature and initial geo- metric imperfections on the overall response of compression-loaded panels are described. In addition, results are presented from a numerical parametric study that indicate the effects of elastic circumferential edge restraints on the prebuckling and buckling response of a selected panel and these numerical results are compared to experimentally measured results. These restraints are used to identify the effects of circumferential edge restraints that are introduced by the test fixture that was used in the present study. It is shown that circumferential edge restraints can introduce substantial nonlinear prebuckling deformations into shallow compression-loaded curved panels that can results in a significant increase in buckling load.

The effects of design details on cost and weight of fuselage structures

NASA Technical Reports Server (NTRS)

Swanson, G. D.; Metschan, S. L.; Morris, M. R.; Kassapoglou, C.

1993-01-01

Crown panel design studies showing the relationship between panel size, cost, weight, and aircraft configuration are compared to aluminum design configurations. The effects of a stiffened sandwich design concept are also discussed. This paper summarizes the effect of a design cost model in assessing the cost and weight relationships for fuselage crown panel designs. Studies were performed using data from existing aircraft to assess the effects of different design variables on the cost and weight of transport fuselage crown panel design. Results show a strong influence of load levels, panel size, and material choices on the cost and weight of specific designs. A design tool being developed under the NASA ACT program is used in the study to assess these issues. The effects of panel configuration comparing postbuckled and buckle resistant stiffened laminated structure is compared to a stiffened sandwich concept. Results suggest some potential economy with stiffened sandwich designs for compression dominated structure with relatively high load levels.

Size Effects in Impact Damage of Composite Sandwich Panels

NASA Technical Reports Server (NTRS)

Dobyns, Alan; Jackson, Wade

2003-01-01

Panel size has a large effect on the impact response and resultant damage level of honeycomb sandwich panels. It has been observed during impact testing that panels of the same design but different panel sizes will show large differences in damage when impacted with the same impact energy. To study this effect, a test program was conducted with instrumented impact testing of three different sizes of sandwich panels to obtain data on panel response and residual damage. In concert with the test program. a closed form analysis method was developed that incorporates the effects of damage on the impact response. This analysis method will predict both the impact response and the residual damage of a simply-supported sandwich panel impacted at any position on the panel. The damage is incorporated by the use of an experimental load-indentation curve obtained for the face-sheet/honeycomb and indentor combination under study. This curve inherently includes the damage response and can be obtained quasi-statically from a rigidly-backed specimen or a specimen with any support conditions. Good correlation has been obtained between the test data and the analysis results for the maximum force and residual indentation. The predictions can be improved by using a dynamic indentation curve. Analyses have also been done using the MSC/DYTRAN finite element code.

Using rice genome-wide association studies to identify DNA markers for marker-assisted selection

USDA-ARS?s Scientific Manuscript database

Rice association mapping panels are collections of rice (Oryza sativa L.) accessions developed for genome-wide association (GWA) studies. One of these panels, the Rice Diversity Panel 1 (RDP1) was phenotyped by various research groups for several traits of interest, and more recently, genotyped with...

Teachers' Remarks on Interactive Whiteboard with LCD Panel Technology

ERIC Educational Resources Information Center

Koçak, Ömer; Gülcü, Aslan

2013-01-01

This study investigated the opinions of teachers about using interactive whiteboards with an LCD panel that was installed in classrooms within the FATIH educational project. The study was conducted at six high schools in which installation of interactive whiteboards with an LCD panel in classrooms was completed and teachers who received training…

Life cycle impacts of North American wood panel Manufacturing

Treesearch

Richard Bergman; D. Kaestner; A. M. Taylor

2016-01-01

Manufacturing building products such as wood panels impacts the environment, including contributing to climate change. This study is a compilation of four studies quantifying these impacts using the life cycle assessment (LCA) method on five wood-based panel products made in North America during 2012. LCA is an internationally accepted and standardized method for...

Utilization of waste of chicken feathers and waste of cardboard as the material of acoustic panel maker

NASA Astrophysics Data System (ADS)

Ansarullah; Rahim, Ramli; Kusno, Asniawaty; Baharuddin; Jamala, Nurul

2018-03-01

In The existence of chicken fur is a waste of chicken slaughterhouse Which is produced daily and still not widely used. Likewise cartons everywhere we can see its being because its function is so great in all human activities In the fulfillment of the need for storage and packaging of goods for human purposes such as electronic goods, commodity, Because it has a relatively large thickness of paper. Several studies have proven that Quill and cardboard can be used for acoustic materials. This study aims to identify the potential of chicken fur and cardboard to be created as panel materials Which acts as an acoustic panel. . This study uses an experimental method by combining two materials, Including waste Quill and carton waste by performing several stages in the formation of panels, Such as the selection of chicken fur material and cardboard cleaning process, drying process, enumeration process, panel modeling process. The result of this research is acoustic panel model with size 20x20cm2 with thickness 9 and 18 mm, The study also produced a Ø9,8 cm diameter-shaped panel model with 1.5cm, 2.5cm, and 5cm thickness for use in testing absorption coefficients using impedance tubes.

Study of noise reduction characteristics of composite fiber-reinforced panels, interior panel configurations, and the application of the tuned damper concept

NASA Technical Reports Server (NTRS)

Lameris, J.; Stevenson, S.; Streeter, B.

1982-01-01

The application of fiber reinforced composite materials, such as graphite epoxy and Kevlar, for secondary or primary structures developing in the commercial airplane industry was investigated. A composite panel program was initiated to study the effects of some of the parameters that affect noise reduction of these panels. The fiber materials and the ply orientation were chosen to be variables in the test program. It was found that increasing the damping characteristics of a structural panel will reduce the vibration amplitudes at resonant frequencies with attendant reductions in sound reduction. Test results for a dynamic absorber, a tuned damper, are presented and evaluated.

Proposed minimal panel of antibodies for cost-effectiveness and accuracy in acute leukemias immunophenotyping: Prospective study at a tertiary care center.

PubMed

Singh, Neha; Pati, Hara Prasad P; Tyagi, Seema; Deka, Roopam; Sharma, Rahul; Saxena, Renu

2016-07-01

Flowcytometry has an essential role in the diagnosis and classification of acute leukemias. However, there exists a great degree of inter-laboratory variability on issues like panel selection, antibody combinations, gating strategies, fluorochromes, and clonal selection. The primary aim of this study was to derive a minimal panel of antibodies and evaluate its diagnostic usefulness in acute leukemias by flowcytometry by using the detailed immune-phenotype of different lineage-specific or non-specific markers. This prospective observational study involved 400 newly diagnosed cases of acute leukemias. Bone marrow aspirate samples were subjected to morphological evaluation, cytogenetics and flow cytometric immunophenotyping. A minimal panel of eight antibodies comprising of CD45/CD34/CD19/MPO/cytoCD3/CD64/CD117/CD79a was derived by applying different permutations and combinations with a diagnostic yield of 97.5%. The minimal panel was further validated by testing in an independent cohort of patients with similar demographic characteristics, where it showed a high diagnostic yield of 98% in comparison with the screening panels proposed by other recently published studies. It may be concluded that the diagnostic performance of the eight antibody panel is better than most other panels used across the different laboratories in terms of yield, number of antibodies used and the scientific approach used to derive and validate the results and so henceforth may be applied in any setting with limited resources for better diagnostic accuracy.

Proceedings of the 9th U.S.-Japan natural resources panel for earthquake research

USGS Publications Warehouse

Detweiler, Shane T.; Ellsworth, William L.

2015-01-01

The Panel strongly urges that the appropriate agencies in the U.S. and Japan that are represented on this panel work together with the academic sector to support and coordinate scientific work in these areas of cooperation. The Panel recognizes the importance of promoting the exchange of scientific personnel, exchange of data, and fundamental studies to advance progress in earthquake research. The U.S. and Japan should promote these exchanges throughout the world. The Panel endorses continuation of these activities.

77 FR 28889 - Center for Scientific Review; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-16

... Panel; RFA Panel: System Science and Health in the Behavioral and Social Sciences. Date: June 6-7, 2012... Special Emphasis Panel; Pilot and Feasibility Clinical Research Studies in Digestive Diseases and...

Noise transmission from a curved panel into a cylindrical enclosure: analysis of structural acoustic coupling.

PubMed

Henry, J K; Clark, R L

2001-04-01

Much of the research on sound transmission through the aircraft fuselage into the interior of aircraft has considered coupling of the entire cylinder to the acoustic modes of the enclosure. Yet, much of the work on structural acoustic control of sound radiation has focused on reducing sound radiation from individual panels into an acoustic space. Research by the authors seeks to bridge this gap by considering the transmission of sound from individual panels on the fuselage to the interior of the aircraft. As part of this research, an analytical model of a curved panel, with attached piezoelectric actuators, subjected to a static pressure load was previously developed. In the present work, the analytical model is extended to consider the coupling of a curved panel to the interior acoustics of a rigid-walled cylinder. Insight gained from an accurate analytical model of the dynamics of the noise transmission from the curved panels of the fuselage into the cylindrical enclosure of an aircraft is essential to the development of feedback control systems for the control of stochastic inputs, such as turbulent boundary layer excitation. The criteria for maximal structural acoustic coupling between the modes of the curved panel and the modes of the cylindrical enclosure are studied. For panels with aspect ratios typical of those found in aircraft, results indicate that predominately axial structural modes couple most efficiently to the acoustic modes of the enclosure. The effects of the position of the curved panel on the cylinder are also studied. Structural acoustic coupling is found to not be significantly affected by varying panel position. The impact of the findings of this study on structural acoustic control design is discussed.

Expert panels as a reference standard in orthodontic research: An assessment of published methods and reporting.

PubMed

Lempesi, Evangelia; Toulia, Electra; Pandis, Nikolaos

2017-04-01

The aim of this study was to investigate the expert panel methodology applied in orthodontics and its reporting quality. Additionally, the relationship between the reporting quality and a range of variables was explored. PubMed was searched for orthodontic studies in which the final diagnosis or assessment was made by 2 or more experts published up to March 16, 2015. Reporting quality assessment was conducted using an established modified checklist. The relationship between potential predictors and the total score was assessed using univariable linear regression. We identified 237 studies with a mean score of 9.97 (SD, 1.12) out of a maximum of 15. Critical information about panel methodology was missing in all studies. The panel composition differed substantially across studies, ranging from 2 to 646 panel members, with large variations in the expertise represented. Only 17 studies (7.2%) reported sample size calculations to justify the panel size. Panel members were partly blinded in 65 (27.4%) studies. Most studies failed to report which statistic was used to compute intrarater (65.8%) and interrater (66.2%) agreements. Journal type (nonorthodontic: β, 0.23; 95% CI, -0.07 to 0.54 compared with orthodontic), publication year (β, 0; 95% CI, -0.02 to 0.02 for each additional year), number of authors (1-3: β, 0.30; 95% CI, -0.13 to 0.74 compared with at least 6; 4-5: β, 0.18; 95% CI, -0.29 to 0.33 compared with at least 6), and number of centers involved (single: β, 0.20; 95% CI, -0.14 to 0.54 compared with multicenter) were not significant predictors of improved reporting. Studies published in Asia and Australia had significantly lower scores compared with those published in Europe (β, -0.54; 95% CI, -0.92 to -0.17). Formal guidelines on methodology and reporting of studies involving expert panels are required. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Media Panel: A Presentation of a Program. Report No. 4

ERIC Educational Resources Information Center

Rosengren, Karl Erik; Windahl, Swen

Media Panel is a research program directed toward media habits, causes and effects of TV use among children and adolescents, and viewer/media interaction in general. Results of this longitudinal study from 1970 to the present are presented in three sections focusing on the early work of the group, the preschool panel, and the primary school panel.…

Technical feasibility of structual flakeboard made from mixed hardwoods and cypress from northern florida

Treesearch

Todd F. Shupe; Chung-Yun Hse; Eddie W. Price

2001-01-01

Homogeneous and 3-layer flakeboard panels were fabricated from mixed hardwood species and baldcypress grown in northern Florida. All panels yielded adequate bending strength and stiffness and dimensional stability. For the homogeneous panels, the study indicates that only one panel condition, i.e., 5.5 percent resin content (RC) and 45 pcf, yielded internal bond (IB)...

Study of noise reduction characteristics of multilayered panels and dual pane windows with Helmholtz resonators

NASA Technical Reports Server (NTRS)

Navaneethan, R.

1981-01-01

The experimental noise attenuation characteristics of flat, general aviation type, multilayered panels are discussed. Experimental results of stiffened panels, damping tape, honeycomb materials and sound absorption materials are presented. Single degree of freedom theoretical models were developed for sandwich type panels with both shear resistant and non-shear resistant core material. The concept of Helmholtz resonators used in conjunction with dual panel windows in increasing the noise reduction around a small range of frequency was tested. It is concluded that the stiffening of the panels either by stiffeners or by sandwich construction increases the low frequency noise reduction.

Study of advanced composite structural design concepts for an arrow wing supersonic cruise configuration

NASA Technical Reports Server (NTRS)

Turner, M. J.; Grande, D. L.

1978-01-01

Based on estimated graphite and boron fiber properties, allowable stresses and strains were established for advanced composite materials. Stiffened panel and conventional sandwich panel concepts were designed and analyzed, using graphite/polyimide and boron/polyimide materials. The conventional sandwich panel was elected as the structural concept for the modified wing structure. Upper and lower surface panels of the arrow wing structure were then redesigned, using high strength graphite/polyimide sandwich panels, retaining the titanium spars and ribs from the prior study. The ATLAS integrated analysis and design system was used for stress analysis and automated resizing of surface panels. Flutter analysis of the hybrid structure showed a significant decrease in flutter speed relative to the titanium wing design. The flutter speed was increased to that of the titanium design by selective increase in laminate thickness and by using graphite fibers with properties intermediate between high strength and high modulus values.

Light Matters (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)

ScienceCinema

Atwater, Harry (Director, Light-Material Interactions in Energy Conversion (LMI), California Institute of Technology); LMI Staff

2017-12-09

'Light Matters' was submitted by the Center for Light-Material Interactions in Energy Conversion (LMI) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. This video was selected as one of five winners by a distinguished panel of judges for its 'striking photography and visual impact'. LMI, an EFRC directed by Harry Atwater at the California Institute of Technology is a partnership of scientists from three institutions: CalTech (lead), University of California, Berkeley, and the University of Illinois at Urbana-Champaign. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. The mission of Light-Material Interactions in Energy Conversion is 'to tailor the morphology, complex dielectric structure, and electronic properties of matter to sculpt the flow of sunlight, enabling light conversion to electrical and chemical energy with unprecedented efficiency.' Research topics are: catalysis (imines hydrocarbons), solar photovoltaic, solar fuels, photonic, solid state lighting, metamaterial, optics, phonons, thermal conductivity, solar electrodes, photsynthesis, CO{sub 2} (convert), greenhouse gas, and matter by design.

Diffusion tensor imaging profiles reveal specific neural tract distortion in normal pressure hydrocephalus

PubMed Central

Pena, Alonso; Price, Stephen J.; Czosnyka, Marek; Czosnyka, Zofia; DeVito, Elise E.; Housden, Charlotte R.; Sahakian, Barbara J.; Pickard, John D.

2017-01-01

Background The pathogenesis of normal pressure hydrocephalus (NPH) remains unclear which limits both early diagnosis and prognostication. The responsiveness to intervention of differing, complex and concurrent injury patterns on imaging have not been well-characterized. We used diffusion tensor imaging (DTI) to explore the topography and reversibility of white matter injury in NPH pre- and early after shunting. Methods Twenty-five participants (sixteen NPH patients and nine healthy controls) underwent DTI, pre-operatively and at two weeks post-intervention in patients. We interrogated 40 datasets to generate a full panel of DTI measures and corroborated findings with plots of isotropy (p) vs. anisotropy (q). Results Concurrent examination of DTI measures revealed distinct profiles for NPH patients vs. controls. PQ plots demonstrated that patterns of injury occupied discrete white matter districts. DTI profiles for different white matter tracts showed changes consistent with i) predominant transependymal diffusion with stretch/ compression, ii) oedema with or without stretch/ compression and iii) predominant stretch/ compression. Findings were specific to individual tracts and dependent upon their proximity to the ventricles. At two weeks post-intervention, there was a 6·7% drop in axial diffusivity (p = 0·022) in the posterior limb of the internal capsule, compatible with improvement in stretch/ compression, that preceded any discernible changes in clinical outcome. On PQ plots, the trajectories of the posterior limb of the internal capsule and inferior longitudinal fasciculus suggested attempted ‘round trips’. i.e. return to normality. Conclusion DTI profiling with p:q correlation may offer a non-invasive biomarker of the characteristics of potentially reversible white matter injury. PMID:28817574

Diffusion tensor imaging profiles reveal specific neural tract distortion in normal pressure hydrocephalus.

PubMed

Keong, Nicole C; Pena, Alonso; Price, Stephen J; Czosnyka, Marek; Czosnyka, Zofia; DeVito, Elise E; Housden, Charlotte R; Sahakian, Barbara J; Pickard, John D

2017-01-01

The pathogenesis of normal pressure hydrocephalus (NPH) remains unclear which limits both early diagnosis and prognostication. The responsiveness to intervention of differing, complex and concurrent injury patterns on imaging have not been well-characterized. We used diffusion tensor imaging (DTI) to explore the topography and reversibility of white matter injury in NPH pre- and early after shunting. Twenty-five participants (sixteen NPH patients and nine healthy controls) underwent DTI, pre-operatively and at two weeks post-intervention in patients. We interrogated 40 datasets to generate a full panel of DTI measures and corroborated findings with plots of isotropy (p) vs. anisotropy (q). Concurrent examination of DTI measures revealed distinct profiles for NPH patients vs. controls. PQ plots demonstrated that patterns of injury occupied discrete white matter districts. DTI profiles for different white matter tracts showed changes consistent with i) predominant transependymal diffusion with stretch/ compression, ii) oedema with or without stretch/ compression and iii) predominant stretch/ compression. Findings were specific to individual tracts and dependent upon their proximity to the ventricles. At two weeks post-intervention, there was a 6·7% drop in axial diffusivity (p = 0·022) in the posterior limb of the internal capsule, compatible with improvement in stretch/ compression, that preceded any discernible changes in clinical outcome. On PQ plots, the trajectories of the posterior limb of the internal capsule and inferior longitudinal fasciculus suggested attempted 'round trips'. i.e. return to normality. DTI profiling with p:q correlation may offer a non-invasive biomarker of the characteristics of potentially reversible white matter injury.

Modal analysis and acoustic transmission through offset-core honeycomb sandwich panels

NASA Astrophysics Data System (ADS)

Mathias, Adam Dustin

The work presented in this thesis is motivated by an earlier research that showed that double, offset-core honeycomb sandwich panels increased thermal resistance and, hence, decreased heat transfer through the panels. This result lead to the hypothesis that these panels could be used for acoustic insulation. Using commercial finite element modeling software, COMSOL Multiphysics, the acoustical properties, specifically the transmission loss across a variety of offset-core honeycomb sandwich panels, is studied for the case of a plane acoustic wave impacting the panel at normal incidence. The transmission loss results are compared with those of single-core honeycomb panels with the same cell sizes. The fundamental frequencies of the panels are also computed in an attempt to better understand the vibrational modes of these particular sandwich-structured panels. To ensure that the finite element analysis software is adequate for the task at hand, two relevant benchmark problems are solved and compared with theory. Results from these benchmark results compared well to those obtained from theory. Transmission loss results from the offset-core honeycomb sandwich panels show increased transmission loss, especially for large cell honeycombs when compared to single-core honeycomb panels.

Primary Care Physician Panel Size and Quality of Care: A Population-Based Study in Ontario, Canada.

PubMed

Dahrouge, Simone; Hogg, William; Younger, Jaime; Muggah, Elizabeth; Russell, Grant; Glazier, Richard H

2016-01-01

The purpose of this study was to determine the relationship between the number of patients under a primary care physician's care (panel size) and primary care quality indicators. We conducted a cross-sectional, population-based study of fee-for-service and capitated interprofessional and non-interprofessional primary health care practices in Ontario, Canada between April 2008 and March 2010, encompassing 4,195 physicians with panel sizes ≥1,200 serving 8.3 million patients. Data was extracted from multiple linked, health-related administrative databases and covered 16 quality indicators spanning 5 dimensions of care: access, continuity, comprehensiveness, and evidence-based indicators of cancer screening and chronic disease management. The likelihood of being up-to-date on cervical, colorectal, and breast cancer screening showed relative decreases of 7.9% (P <.001), 5.9% (P = .01), and 4.6% (P <.001), respectively, with increasing panel size (from 1,200 to 3,900). Eight chronic care indicators (4 medication-based and 4 screening-based) showed no significant association with panel size. The likelihood of individuals with a new diagnosis of congestive heart failure having an echocardiogram, however, increased by a relative 8.1% (P <.001) with higher panel size. Increasing panel size was also associated with a 10.8% relative increase in hospitalization rates for ambulatory-care-sensitive conditions (P = .04) and a 10.8% decrease in non-urgent emergency department visits (P = .004). Continuity was highest with medium panel sizes (P <.001), and comprehensiveness had a small decrease (P = .03) with increasing panel size. Increasing panel size was associated with small decreases in cancer screening, continuity, and comprehensiveness, but showed no consistent relationships with chronic disease management or access indicators. We found no panel size threshold above which quality of care suffered. © 2016 Annals of Family Medicine, Inc.

The effect of ICT on CO2 emissions in emerging economies: does the level of income matters?

PubMed

Danish; Khan, Noheed; Baloch, Muhammad Awais; Saud, Shah; Fatima, Tehreem

2018-05-31

In the modern era of globalization, the rapid increase in information and telecommunication technologies (ICTs) contributes in various sectors of an economy; however, the environmental consequences of ICTs cannot be ignored. Therefore, the study investigates the nexus between ICTs, economic growth, financial development, and environmental quality in emerging economies. The novel feature of the study is that the interaction term of ICT is introduced with economic growth and financial development. The empirical findings of the study are based on panel mean group (MG) and augmented mean group (AMG) estimation methods from 1990 to 2015. The following empirical results are established: first the ICTs significantly affect CO 2 emissions. Second, the moderating effect of ICT and financial development stimulate the level of CO 2 emissions. Third, economic growth contributes CO 2 emission; however, the interaction between ICT and GDP mitigates the level of pollution. Policy thresholds with the R&D in ICT sector are required to mitigate the level of CO 2 emission. Introduction of green ICTs projects in the financial sector is a better choice to improve the energy efficiency.

Active structural acoustic control of noise transmission through double panel systems

NASA Astrophysics Data System (ADS)

Carneal, James P.; Fuller, Chris R.

1995-04-01

A preliminary parametric study of active control of sound transmission through double panel systems has been experimentally performed. The technique used is the active structural acoustic control (ASAC) approach where control inputs, in the form of piezoelectric actuators, were applied to the structure while the radiated pressure field was minimized. Results indicate the application of control inputs to the radiating panel resulted in greater transmission loss due to its direct effect on the nature of the structural-acoustic coupling between the radiating panel and the receiving chamber. Increased control performance was seen in a double panel system consisting of a stiffer radiating panel with a lower modal density. As expected, more effective control of a radiating panel excited on-resonance is achieved over one excited off-resonance. In general, the results validate the ASAC approach for double panel systems and demonstrate that it is possible to take advantage of double panel behavior to enhance control performance, although it is clear that further research must be done to understand the physics involved.

The response of cylindrical panels fabricated from symmetrically and unsymmetrically laminated composite materials

NASA Technical Reports Server (NTRS)

Carper, D. M.; Johnson, E. R.; Hyer, M. W.

1983-01-01

Equations are developed which govern the deflection response of long cylindrical panels subjected to a line load. The line load is directed toward the center of curvature of the panel, is located at an arbitrary point along the arc length of the panel, and is included at an arbitrary angle relative to the radial direction. Only the geometrically linear problem is considered and the spatial dependence in the problem is reduced to one independent variable, specifically, the arc length along the panel. The problem is thus solvable in closed form. Both symmetrically laminated and the less common unsymmetrically laminated simply supported panels are studied. The unsymmetrically laminated case was considered because the natural shape of an unsymmetric laminate is cylindrical. Results are presented which show the influence of the location and inclination of the line load on panel deflection. Shallow and deep panels are considered. Both the symmetric and unsymmetric panels exhibit similar behavior, the unsymmetric configurations being less stiff. Limited experimental results are presented.

Axial Compression Behavior of a New Type of Prefabricated Concrete Sandwich Wall Panel

NASA Astrophysics Data System (ADS)

Qun, Xie; Shuai, Wang; Chun, Liu

2018-03-01

A novel type of prefabricated concrete sandwich wall panel which could be used as a load-bearing structural element in buildings has been presented in this paper. Compared with the traditional sandwich panels, there are several typical characteristics for this wall system, including core columns confined by spiral stirrup along the cross-section of panel with 600mm spacing, precast foamed concrete block between two structural layers as internal insulation part, and a three-dimensional (3D) steel wire skeleton in each layer which is composed of two vertical steel wire meshes connected by horizontally short steel bar. All steel segments in the panel are automatically prefabricated in factory and then are assembled to form steel system in site. In order to investigate the structural behavior of this wall panel, two full-scale panels have been experimentally studied under axial compressive load. The test results show that the wall panel presents good load-bearing capacity and integral stiffness without out-of-plane flexural failure. Compared to the panel with planar steel wire mesh in concrete layer, the panel with 3D steel wire skeleton presents higher strength and better rigidity even in the condition of same steel ratio in panels which verifies that the 3D steel skeleton could greatly enhance the structural behavior of sandwich panel.

Acute changes in pulse pressure in relation to constituents of particulate air pollution in elderly persons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacobs, Lotte; Buczynska, Anna; Walgraeve, Christophe

An increased pulse pressure (difference between systolic and diastolic blood pressure) suggests aortic stiffening. The objective of this study was to examine the acute effects of both particulate matter (PM) mass and composition on blood pressure, among elderly persons. We carried out a panel study in persons living in elderly homes in Antwerp, Belgium. We recruited 88 non-smoking persons, 70% women with a mean age of 83 years (standard deviation: 5.2). Blood pressure was measured and a blood sample was collected on two time points, which were chosen so that there was an exposure contrast in ambient PM exposure. Themore » elemental content of the collected indoor and outdoor PM{sub 2.5} (particulate matter with an aerodynamic diameter <2.5 {mu}m) mass concentration was measured. Oxygenated polycyclic aromatic hydrocarbons (oxy-PAHs) on outdoor PM{sub 10} (particulate matter with an aerodynamic diameter <10 {mu}m) were measured. Each interquartile range increase of 20.8 {mu}g/m Superscript-Three in 24-h mean outdoor PM{sub 2.5} was associated with an increase in pulse pressure of 4.0 mmHg (95% confidence interval: 1.8-6.2), in persons taking antihypertensive medication (n=57), but not in persons not using antihypertensive medication (n=31) (p for interaction: 0.02). Vanadium, iron and nickel contents of PM{sub 2.5} were significantly associated with systolic blood pressure and pulse pressure, among persons on antihypertensive medication. Similar results were found for indoor concentrations. Of the oxy-PAHs, chrysene-5,6-dione and benzo[a]pyrene-3,6-dione were significantly associated with increases in systolic blood pressure and pulse pressure. In elderly, pulse pressure was positively associated with acute increases in outdoor and indoor air pollution, among persons taking antihypertensive medication. These results might form a mechanistic pathway linking air pollution as a trigger of cardiovascular events.« less

Inward Leakage Variability between Respirator Fit Test Panels – Part I. Deterministic Approach

PubMed Central

Zhuang, Ziqing; Liu, Yuewei; Coffey, Christopher C.; Miller, Colleen; Szalajda, Jonathan

2015-01-01

Inter-panel variability has never been investigated. The objective of this study was to determine the variability between different anthropometric panels used to determine the inward leakage (IL) of N95 filtering facepiece respirators (FFRs) and elastomeric half-mask respirators (EHRs). A total of 144 subjects, who were both experienced and non-experienced N95 FFR users, were recruited. Five N95 FFRs and five N95 EHRs were randomly selected from among those models tested previously in our laboratory. The PortaCount Pro+ (without N95-Companion) was used to measure IL of the ambient particles with a detectable size range of 0.02 to 1 μm. The Occupational Safety and Health Administration standard fit test exercises were used for this study. IL test were performed for each subject using each of the 10 respirators. Each respirator/subject combination was tested in duplicate, resulting in a total 20 IL tests for each subject. Three 35-member panels were randomly selected without replacement from the 144 study subjects stratified by the National Institute for Occupational Safety and Health bivariate panel cell for conducting statistical analyses. The geometric mean (GM) IL values for all 10 studied respirators were not significantly different among the three randomly selected 35-member panels. Passing rate was not significantly different among the three panels for all respirators combined or by each model. This was true for all IL pass/fail levels of 1%, 2%, and 5%. Using 26 or more subjects to pass the IL test, all three panels had consistent passing/failing results for pass/fail levels of 1% and 5%. Some disagreement was observed for the 2% pass/fail level. Inter-panel variability exists, but it is small relative to the other sources of variation in fit testing data. The concern about inter-panel variability and other types of variability can be alleviated by properly selecting: pass/fail level (IL 1–5%); panel size (e.g., 25 or 35); and minimum number of subjects required to pass (e.g., 26 of 35 or 23 of 35). PMID:26011282

Structural efficiency study of composite wing rib structures

NASA Technical Reports Server (NTRS)

Swanson, Gary D.; Gurdal, Zafer; Starnes, James H., Jr.

1988-01-01

A series of short stiffened panel designs which may be applied to a preliminary design assessment of an aircraft wing rib is presented. The computer program PASCO is used as the primary design and analysis tool to assess the structural efficiency and geometry of a tailored corrugated panel, a corrugated panel with a continuous laminate, a hat stiffened panel, a blade stiffened panel, and an unstiffened flat plate. To correct some of the shortcomings in the PASCO analysis when shear is present, a two step iterative process using the computer program VICON is used. The loadings considered include combinations of axial compression, shear, and lateral pressure. The loading ranges considered are broad enough such that the designs presented may be applied to other stiffened panel applications. An assessment is made of laminate variations, increased spacing, and nonoptimum geometric variations, including a beaded panel, on the design of the panels.

Damage Characteristics and Residual Strength of Composite Sandwich Panels Impacted with and Without Compression Loading

NASA Technical Reports Server (NTRS)

McGowan, David M.; Ambur, Damodar R.

1998-01-01

The results of an experimental study of the impact damage characteristics and residual strength of composite sandwich panels impacted with and without a compression loading are presented. Results of impact damage screening tests conducted to identify the impact-energy levels at which damage initiates and at which barely visible impact damage occurs in the impacted facesheet are discussed. Parametric effects studied in these tests include the impactor diameter, dropped-weight versus airgun-launched impactors, and the effect of the location of the impact site with respect to the panel boundaries. Residual strength results of panels tested in compression after impact are presented and compared with results of panels that are subjected to a compressive preload prior to being impacted.

Composite panels made with biofiber or office wastepaper bonded with thermoplastic and/or thermosetting resin

Treesearch

James H. Muehl; Andrzej M. Krzysik; Poo Chow

2004-01-01

The purpose of this study was to evaluate two groups of composite panels made from two types of underutilized natural fiber sources, kenaf bast fiber and office wastepaper, for their suitability in composite panels. All panels were made with 5% thermosetting phenol-formaldehyde (PF) resin and 1.5% wax. Also, an additional 10% polypropylene (PP) thermoplastic resin was...

Comparing Dropout Predictors for Two State-Level Panels Using Grade 6 and Grade 8 Data

ERIC Educational Resources Information Center

Franklin, Bobby J.; Trouard, Stephen B.

2016-01-01

The purpose of this study was to examine the effectiveness of dropout predictors across time. Two state-level high school graduation panels were selected to begin with the seventh and ninth grades but end at the same time. The first panel (seventh grade) contained 29,554 students and used sixth grade predictors. The second panel (ninth grade)…

Self-transcendence and depression among AIDS Memorial Quilt panel makers.

PubMed

Kausch, Kurt D; Amer, Kim

2007-06-01

Self-transcendence is a process that can help individuals reestablish well-being after experiencing a significant, life-altering event. In this study, we sought to identify the relationship between self-transcendence and depression in individuals who lost loved ones to HIV/AIDS and to describe and compare self-transcendence, self-transcendence variables of acceptance and spirituality, and depression among bereaved individuals who created AIDS Memorial Quilt panels with those who did not. The findings support Reed's self-transcendence theory, with inverse correlations between self-transcendence and depression obtained from both the total group and the panel makers. Significant differences were also found between certain self-transcendence variables and depression among the study participants related to gender and ethnicity. In addition, thematic analysis of panel maker interviews revealed five themes: Quilt panel making provides validation, Quilt panel making creates a living memory, liberating acceptance of loss, community of survivors, and connection to a higher power. These findings assist in understanding the complexities of the grief process and support the usefulness of Quilt panel making as an intervention for coping with grief related to HIV/AIDS.

Effects of Tangential Edge Constraints on the Postbuckling Behavior of Flat and Curved Panels Subjected to Thermal and Mechanical Loads

NASA Technical Reports Server (NTRS)

Lin, W.; Librescu, L.; Nemeth, M. P.; Starnes, J. H. , Jr.

1994-01-01

A parametric study of the effects of tangential edge constraints on the postbuckling response of flat and shallow curved panels subjected to thermal and mechanical loads is presented. The mechanical loads investigated are uniform compressive edge loads and transverse lateral pressure. The temperature fields considered are associated with spatially nonuniform heating over the panels, and a linear through-the-thickness temperature gradient. The structural model is based on a higher-order transverse-shear-deformation theory of shallow shells that incorporates the effects of geometric nonlinearities, initial geometric imperfections, and tangential edge motion constraints. Results are presented for three-layer sandwich panels made from transversely isotropic materials. Simply supported panels are considered in which the tangential motion of the unloaded edges is either unrestrained, partially restrained, or fully restrained. These results focus on the effects of the tangential edge restraint on the postbuckling response. The results of this study indicate that tangentially restraining the edges of a curved panel can make the panel insensitive to initial geometric imperfections in some cases.

Optimization of composite sandwich cover panels subjected to compressive loadings

NASA Technical Reports Server (NTRS)

Cruz, Juan R.

1991-01-01

An analysis and design method is presented for the design of composite sandwich cover panels that include the transverse shear effects and damage tolerance considerations. This method is incorporated into a sandwich optimization computer program entitled SANDOP. As a demonstration of its capabilities, SANDOP is used in the present study to design optimized composite sandwich cover panels for for transport aircraft wing applications. The results of this design study indicate that optimized composite sandwich cover panels have approximately the same structural efficiency as stiffened composite cover panels designed to satisfy individual constraints. The results also indicate that inplane stiffness requirements have a large effect on the weight of these composite sandwich cover panels at higher load levels. Increasing the maximum allowable strain and the upper percentage limit of the 0 degree and +/- 45 degree plies can yield significant weight savings. The results show that the structural efficiency of these optimized composite sandwich cover panels is relatively insensitive to changes in core density. Thus, core density should be chosen by criteria other than minimum weight (e.g., damage tolerance, ease of manufacture, etc.).

Design and development of polyphenylene oxide foam as a reusable internal insulation for LH2 tanks, phase 2

NASA Technical Reports Server (NTRS)

1972-01-01

PPO form was tested for mechanical strength, for the effects of 100 thermal cycles from 450 K (359 F) to 21 K (-423 F) and for gas flow resistance characteristics. PPO foam panels were investigated for density variations, methods for joining panels were studied and panel joint thermal test specimens were fabricated. The range of foam panel thickness under investigation was extended to include 7 mm (0.3 in) and 70 mm (2.8 in) panels which also were tested for thermal performance.

Essaying a Pseudo-Panel Approach: Studies on Education, Women, and Income Inequality in Thailand

ERIC Educational Resources Information Center

Warunsiri, Sasiwimon

2010-01-01

This dissertation is composed of three studies on Thai labor markets using a pseudo-panel data set: The first chapter estimates the rate of return to education in Thailand, while treating the endogeneity bias common to estimates from data on individuals. Pseudo-panel data are constructed from repeated cross sections of Labor Force Surveys…

Literature review on use of nonwood plant fibers for building materials and panels

Treesearch

John A. Youngquist; Brent E. English; Roger C. Scharmer; Poo Chow; Steven R. Shook

1994-01-01

The research studies included in this review focus on the use of nonwood plant fibers for building materials and panels. Studies address (1) methods for efficiently producing building materials and panels from nonwood plant fibers; (2) treatment of fibers prior to board production; (3) process variables, such as press time and temperature, press pressure, and type of...

Demographic and Psychological Predictors of Panel Attrition: Evidence from the New Zealand Attitudes and Values Study

PubMed Central

Satherley, Nicole; Milojev, Petar; Greaves, Lara M.; Huang, Yanshu; Osborne, Danny; Bulbulia, Joseph; Sibley, Chris G.

2015-01-01

This study examines attrition rates over the first four years of the New Zealand Attitudes and Values Study, a longitudinal national panel sample of New Zealand adults. We report the base rate and covariates for the following four distinct classes of respondents: explicit withdrawals, lost respondents, intermittent respondents and constant respondents. A multinomial logistic regression examined an extensive range of demographic and socio-psychological covariates (among them the Big-Six personality traits) associated with membership in these classes (N = 5,814). Results indicated that men, Māori and Asian peoples were less likely to be constant respondents. Conscientiousness and Honesty-Humility were also positively associated with membership in the constant respondent class. Notably, the effect sizes for the socio-psychological covariates of panel attrition tended to match or exceed those of standard demographic covariates. This investigation broadens the focus of research on panel attrition beyond demographics by including a comprehensive set of socio-psychological covariates. Our findings show that core psychological covariates convey important information about panel attrition, and are practically important to the management of longitudinal panel samples like the New Zealand Attitudes and Values Study. PMID:25793746

Executive dysfunction assessed by Clock-Drawing Test in older non-demented subjects with metabolic syndrome is not mediated by white matter lesions.

PubMed

Viscogliosi, Giovanni; Chiriac, Iulia Maria; Andreozzi, Paola; Ettorre, Evaristo

2015-10-01

Metabolic syndrome (MetS) has been associated with greater occurrence of white matter hyperintensities (WMH). It remains uncertain whether MetS as a construct is associated with poorer cognitive performances. This study explores whether MetS is associated with poorer performances in global and domain-specific cognitive tests in older non-demented subjects independently of its individual components, WMH severity and other variables. MetS was diagnosed according to the National Cholesterol Education Program Adult Treatment Panel III definition. Brain magnetic resonance studies (1.5T) were performed. Deep and periventricular WMH were graded using the Fazekas scale. Subjects underwent the Mini-Mental State Examination, the Babcock Short Story Recall test and the Clock-Drawing Test (CDT). Eighty community-dwellers aged 67-91 years were studied. Subjects with MetS (n = 35) had more severe WMH, and poorer performances on the CDT (P = 0.003) and the Babcock Short Story Recall test (P = 0.027). After multiple adjustment, MetS was inversely associated with CDT scores (B = -1.285; 95% confidence interval = -1.996--0.575; P = 0.001) but not with episodic memory. Results were not affected by WMH severity. Interestingly, none of the individual components of MetS predicted poorer cognitive performances. Impairment in executive functions assessed by CDT may represent an early and specific sign of cognitive decline in older individuals with MetS. Future longitudinal studies are needed to better establish the predictive role of MetS on dementia and to demonstrate the possibility of dementia prevention by targeting MetS. © 2015 The Authors. Psychiatry and Clinical Neurosciences © 2015 Japanese Society of Psychiatry and Neurology.

Effects of personal air pollution exposure on asthma symptoms, lung function and airway inflammation.

PubMed

Chambers, L; Finch, J; Edwards, K; Jeanjean, A; Leigh, R; Gonem, S

2018-03-11

There is evidence that air pollution increases the risk of asthma hospitalizations and healthcare utilization, but the effects on day-to-day asthma control are not fully understood. We undertook a prospective single-centre panel study to test the hypothesis that personal air pollution exposure is associated with asthma symptoms, lung function and airway inflammation. Thirty-two patients with a clinical diagnosis of asthma were provided with a personal air pollution monitor (Cairclip NO 2 /O 3 ) which was kept on or around their person throughout the 12-week follow-up period. Ambient levels of NO 2 and particulate matter were modelled based upon satellite imaging data. Directly measured ozone, NO 2 and particulate matter levels were obtained from a monitoring station in central Leicester. Participants made daily electronic records of asthma symptoms, peak expiratory flow and exhaled nitric oxide. Spirometry and asthma symptom questionnaires were completed at fortnightly study visits. Data were analysed using linear mixed effects models and cross-correlation. Cairclip exposure data were of good quality with clear evidence of diurnal variability and a missing data rate of approximately 20%. We were unable to detect consistent relationships between personal air pollution exposure and clinical outcomes in the group as a whole. In an exploratory subgroup analysis, total oxidant exposure was associated with increased daytime symptoms in women but not men. We did not find compelling evidence that air pollution exposure impacts on day-to-day clinical control in an unselected asthma population, but further studies are required in larger populations with higher exposure levels. Women may be more susceptible than men to the effects of air pollution, an observation which requires confirmation in future studies. © 2018 John Wiley & Sons Ltd.

A general panel sizing computer code and its application to composite structural panels

NASA Technical Reports Server (NTRS)

Anderson, M. S.; Stroud, W. J.

1978-01-01

A computer code for obtaining the dimensions of optimum (least mass) stiffened composite structural panels is described. The procedure, which is based on nonlinear mathematical programming and a rigorous buckling analysis, is applicable to general cross sections under general loading conditions causing buckling. A simplified method of accounting for bow-type imperfections is also included. Design studies in the form of structural efficiency charts for axial compression loading are made with the code for blade and hat stiffened panels. The effects on panel mass of imperfections, material strength limitations, and panel stiffness requirements are also examined. Comparisons with previously published experimental data show that accounting for imperfections improves correlation between theory and experiment.

Panel cutting method: new approach to generate panels on a hull in Rankine source potential approximation

NASA Astrophysics Data System (ADS)

Choi, Hee-Jong; Chun, Ho-Hwan; Park, Il-Ryong; Kim, Jin

2011-12-01

In the present study, a new hull panel generation algorithm, namely panel cutting method, was developed to predict flow phenomena around a ship using the Rankine source potential based panel method, where the iterative method was used to satisfy the nonlinear free surface condition and the trim and sinkage of the ship was taken into account. Numerical computations were performed to investigate the validity of the proposed hull panel generation algorithm for Series 60 (CB=0.60) hull and KRISO container ship (KCS), a container ship designed by Maritime and Ocean Engineering Research Institute (MOERI). The computational results were validated by comparing with the existing experimental data.

Estudio de la influencia de la refrigeracion con aire de forma natural e inducida en el comportamiento de instalaciones fotovoltaicas

NASA Astrophysics Data System (ADS)

Mazon Hernandez, Rocio

The aim is to analyse the negative influence of high panel temperatures on electrical production when they are placed on steel roofs of industrial buildings and greenhouse roofs. Different configurations have been tested in order to allow cooling of photovoltaic panels to decrease panel temperature and improve electrical performance. To research this problem two experimental facilities have been built. The first facility includes two panels fixed on a structure. A panel is integrated on a parallel steel plate which does not allow sufficient cooling. Between both surfaces, there is an open air channel in which an air flow is created by the chimney effect thus cooling the panel by natural convection or inducing air, using a fan, by forced convection. The other panel has not any plate underneath it and is used as a referent. The electrical behaviour of the integrated panel has been studied for different air gaps and induced velocities, being also compared with the reference panel. An experimental model was developed to establish correlations which allow determine the panel temperature depending on the influential variables on the cooling ability. This research also analyses the data of a working solar plant, with the same panel model, obtaining the correlations between electrical variables and panel temperature. A comparison with the electrical behaviour in the experimental facility and the solar plant is also presented. The second experimental facility is a replica of a photovoltaic greenhouse. It consists of four photovoltaic panels placed on the plastic roof, providing an open and divergent channel between both surfaces thus creating an air flow by natural convection. This research studies the effect of high temperatures within the greenhouse which is transferred by the roof and thus affects the electrical production. In addition, two air gaps were used and the effect of adding insulating material to the plastic roof was studied. The electrical variables of the panels are analysed to compare and select the best configuration. The presented research provides a deep knowledge of how they work as well as information and results for an improvement in future designs of building integrated photovoltaic systems. Este estudio se centra en analizar la influencia negativa de la temperatura en la produccion electrica de paneles fotovoltaicos al estar emplazados sobre cubierta de acero, como sucede en naves industriales y sobre un invernadero. Se estudian diferentes configuraciones que permitan refrigerar los paneles, reduciendo su temperatura y mejorar su rendimiento. Para abordar este problema, se han construido dos instalaciones experimentales, fieles a plantas solares en funcionamiento. Una instalacion engloba dos paneles fotovoltaicos sobre estructura fija al suelo. Uno de los paneles esta integrado sobre una superficie paralela y metalica. Entre ambas superficies existe un espacio que posibilita circular aire, permitiendo refrigerar el panel por conveccion natural, o conveccion forzada impulsando el aire con un ventilador. El otro panel, libre por su cara posterior y se ha considerado de referencia. Se ha estudiado el comportamiento del panel integrado sobre cubierta para diferentes secciones de aire y velocidades inducidas, comparandolo con el panel de referencia. Se ha desarrollado un modelo experimental que nos permite determinar la temperatura del panel en funcion de las variables que influyen en su refrigeracion. Adicionalmente, se han analizado los datos de una planta solar en funcionamiento, con paneles de igual caracteristicas, obteniendo correlaciones entre la temperatura del panel y las variables electricas y comparandolos con las obtenidas en la instalacion experimental. La segunda instalacion experimental reproduce parte de una instalacion solar sobre un invernadero, formada por cuatro paneles fotovoltaicos colocados sobre el plastico del invernadero, existiendo un canal divergente entre ambas superficies. Se estudia la influencia de las altas temperaturas en el interior del invernadero sobre la produccion electrica de los paneles, decido a la transferencia de calor del interior del invernadero. Ademas, se han ensayado dos separaciones diferentes y para cada una se ha comparado con la misma, utilizando un aislante sobre la cubierta. El estudio realizado sobre ambas instalaciones ha proporcionado un conocimiento profundo del funcionamiento de cada una de ellas, asi como informacion valida para una mejora de futuros disenos de instalaciones fotovoltaicas sobre cubiertas.

Is solvent/detergent plasma better than standard fresh-frozen plasma? A systematic review and an expert consensus document

PubMed Central

Marietta, Marco; Franchini, Massimo; Bindi, M. Lucia; Picardi, Francesco; Ruggeri, Matteo; De Silvestro, Giustina

2016-01-01

Background Only a few studies have compared solvent/detergent plasma (SD-plasma) to standard fresh-frozen plasma (FFP) in terms of efficacy and safety. Materials and methods A systematic review was performed in order to develop a consensus document on the use of SD-plasma. Moreover, a pharmacoeconomic study was performed in order to assess whether the use of SD-plasma can be cost-effective with respect to the use of FFP. A multidisciplinary panel used the systematic review and the GRADE methodology to develop evidence-based recommendations on this topic. Results Based on moderate to very low quality evidence, the panel developed the following consensus statements: (i) the panel suggested that SD-plasma is safer than FFP; (ii) the panel could not express for or against a greater efficacy of SD-plasma as compared to FFP; (iii) the panel suggested that in patients undergoing liver transplantation SD-plasma can be preferred over FFP; (iv) the panel suggested that SD-plasma can be preferred over FFP in patients with thrombotic thrombocytopenic purpura undergoing plasma-exchange procedures; (v) the panel could not recommend for or against preferring SD-plasma over FFP in critical care patients; and (vi) the panel suggested that the use of SD-plasma can be cost-effective with respect to the use of FFP. Discussion Data from additional randomised studies are needed to establish more definitive guidelines on the use of SD-plasma. PMID:27136429

Postbuckling delamination of a stiffened composite panel using finite element methods

NASA Technical Reports Server (NTRS)

Natsiavas, S.; Babcock, C. D.; Knauss, W. G.

1987-01-01

A combined numerical and experimental study is carried out for the postbuckling behavior of a stiffened composite panel. The panel is rectangular and is subjected to static in-plane compression on two opposite edges to the collapse level. Nonlinear (large deflection) plate theory is employed, together with an experimentally based failure criterion. It is found that the stiffened composite panel can exhibit significant postbuckling strength.

Assessment of Intelligent Tutoring Systems Technologies and Opportunities (Evaluation et opportunites des technologies des systemes de tutorat intelligents)

DTIC Science & Technology

2018-01-01

His research designs adaptive systems for online content, by integrating research in psychology and education, human- ANNEX A − INTELLIGENT TUTORING...related scientific activities that include systems engineering, operational research and analysis, synthesis, integration and validation of knowledge...System Analysis and Studies Panel • SCI Systems Concepts and Integration Panel • SET Sensors and Electronics Technology Panel These Panels and Group

Experimental Study on Composite Light-weight Microporous Concrete Cladding Panels

NASA Astrophysics Data System (ADS)

Lida, Tian; Dongyan, Wang; Kang, Liu

2018-03-01

A new type of composite light-weight microporous concrete cladding panel was developed, with the compound function of retaining and heat preservation. Two specimens of the new cladding panel and connection detailing were made for out-of-plane bending experiment. The results indicate that the new cladding panel and its connection detailing are of sufficient stiffness, bearing capacity and deformability under wind load and out-of-plane seismic action.

Effects of Blank Curvature and Tool Conditions on the Spring Back of Thin Sheet Panel Formed through Local Embossing and Edge L-Bending

NASA Astrophysics Data System (ADS)

Park, Keecheol; Park, Jongyoun; Nam, Jaebok

2011-08-01

Due to the application of thinner sheet steels, the stamped panels in the forming process, generally, are severely distorted. The wavy shape of embossed panel finally converted to residual stress embedded in the panel at final forming (edge L-bending) and it is known as the cause of twisting and oil canning of spring backed panel. Another important source of stamped shape deviation is the curvature of blank. The effects of blank curvature on the shape defects (panel curvature and twisting) after stamping were investigated from defective panel analysis, model experiment and stamping simulation. And the effect of tool conditions (BHF and bead height change) on spring backed shape of real TV bottom chassis were studied. The initial curvature of blank was remained in the flat area of stamped panels as width directional curvature. It converted from length direction curvature of blank. The curvature of initial blank reduced the wavy shape after local emboss forming, but twisting after edge L-bending was increased at large blank curvature cases. The effects of emboss forming conditions, the forming heights and blank holding force were studied and it was found that the wavy shape of stamped sheet was rapidly changed although the forming conditions altered very small amount.

Heart rate variability and DNA methylation levels are altered after short-term metal fume exposure among occupational welders: a repeated-measures panel study.

PubMed

Fan, Tianteng; Fang, Shona C; Cavallari, Jennifer M; Barnett, Ian J; Wang, Zhaoxi; Su, Li; Byun, Hyang-Min; Lin, Xihong; Baccarelli, Andrea A; Christiani, David C

2014-12-16

In occupational settings, boilermakers are exposed to high levels of metallic fine particulate matter (PM2.5) generated during the welding process. The effect of welding PM2.5 on heart rate variability (HRV) has been described, but the relationship between PM2.5, DNA methylation, and HRV is not known. In this repeated-measures panel study, we recorded resting HRV and measured DNA methylation levels in transposable elements Alu and long interspersed nuclear element-1 (LINE-1) in peripheral blood leukocytes under ambient conditions (pre-shift) and right after a welding task (post-shift) among 66 welders. We also monitored personal PM2.5 level in the ambient environment and during the welding procedure. The concentration of welding PM2.5 was significantly higher than background levels in the union hall (0.43 mg/m3 vs. 0.11 mg/m3, p < 0.0001). The natural log of transformed power in the high frequency range (ln HF) had a significantly negative association with PM2.5 exposure (β = -0.76, p = 0.035). pNN10 and pNN20 also had a negative association with PM2.5 exposure (β = -0.16%, p = 0.006 and β = -0.13%, p = 0.030, respectively). PM2.5 was positively associated with LINE-1 methylation [β = 0.79%, 5-methylcytosince (%mC), p = 0.013]; adjusted for covariates. LINE-1 methylation did not show an independent association with HRV. Acute decline of HRV was observed following exposure to welding PM2.5 and evidence for an epigenetic response of transposable elements to short-term exposure to high-level metal-rich particulates was reported.

Disability, participation, and subjective wellbeing among older couples

PubMed Central

Freedman, Vicki A.; Stafford, Frank; Schwarz, Norbert; Conrad, Frederick; Cornman, Jennifer C.

2012-01-01

This paper investigates the link between disability and subjective wellbeing, using data from the 2009 Disability and Use of Time supplement to the Panel Study of Income Dynamics, the longest running national panel study in the United States. Disability is construed broadly to include both the presence of any physical, cognitive, or sensory impairment or activity limitation and also the severity of underlying impairments. Subjective wellbeing is measured using two distinct approaches: reports of life satisfaction and of moment-to-moment wellbeing—both positive and negative—on the previous day. The latter, collected through 24-h time diaries, also offers for the first time the ability to explore the role of participation in particular kinds of activities linking disability to subjective wellbeing. The analytic sample included married persons ages 60 and older and their spouses (n = 751 married individuals) who completed 1498 diaries. Several new findings emerged: no matter what the measure of wellbeing, older married adults with disability report worse subjective wellbeing than those without, and neither different demographic and socioeconomic profiles nor differences in participation fully account for these disparities. Influences of disability on global life satisfaction and episodic reports of happiness were relatively small and of comparable size. However, notably sizeable differences were identified in the cumulative number of pleasant minutes experienced yesterday by disability status - on the order of 71 fewer minutes on average for those with a disability of average severity. Differences appear to be more strongly linked to somatic symptoms of pain and feeling tired than to differential intensity of experiencing happiness, sadness, frustration, or worry. We also found limited support for the notion that participation partially mediates the relationship between disability and global, but not episodic, subjective wellbeing. PMID:22226156

Can natural variation in grain P concentrations be exploited in rice breeding to lower fertilizer requirements?

PubMed

Wang, Fanmiao; King, James Douglas Morrison; Rose, Terry; Kretzschmar, Tobias; Wissuwa, Matthias

2017-01-01

Agricultural usage of phosphorus (P) is largely driven by the amount of P removed from fields in harvested plant matter as offtake needs to be balanced by P fertilizer application. Reducing P concentration in grains is a way to decrease P offtake and reduce P fertilizer requirements or soil P mining where insufficient P is applied. Our objective was to assesses the genotypic variation for grain P concentration present within the rice gene pool and resolve to what extent it is affected by environment (P supply) or associated with genetic factors. About 2-fold variation in grain P concentrations were detected in two rice diversity panels, however, environmental effects were stronger than genotype effects. Genome wide association studies identified several putative loci associated with grain P concentrations. In most cases this was caused by minor haplotype associations with high grain P concentrations while associations with reduced P concentrations were identified on chromosomes 1, 6, 8, 11 and 12. Only the latter type of locus is of interest in breeding for reduced P concentrations and the most promising locus was at 20.7 Mb on chromosome 8, where a rare haplotype that was absent from all modern varieties studied reduced grain P concentration by 9.3%. This and all other loci were not consistently detected across environments or association panels, confirming that genetic effects were small compared to effects of environment. We conclude that the genetic effects detected were not sufficiently large or consistent to be of utility in plant breeding. Instead breeding efforts may have to rely on small to medium effect mutants already identified and attempt to achieve a more pronounced reduction in grain P concentration through the introgression of these mutants into a single genetic background.

Can natural variation in grain P concentrations be exploited in rice breeding to lower fertilizer requirements?

PubMed Central

Wang, Fanmiao; King, James Douglas Morrison; Rose, Terry; Kretzschmar, Tobias

2017-01-01

Agricultural usage of phosphorus (P) is largely driven by the amount of P removed from fields in harvested plant matter as offtake needs to be balanced by P fertilizer application. Reducing P concentration in grains is a way to decrease P offtake and reduce P fertilizer requirements or soil P mining where insufficient P is applied. Our objective was to assesses the genotypic variation for grain P concentration present within the rice gene pool and resolve to what extent it is affected by environment (P supply) or associated with genetic factors. About 2-fold variation in grain P concentrations were detected in two rice diversity panels, however, environmental effects were stronger than genotype effects. Genome wide association studies identified several putative loci associated with grain P concentrations. In most cases this was caused by minor haplotype associations with high grain P concentrations while associations with reduced P concentrations were identified on chromosomes 1, 6, 8, 11 and 12. Only the latter type of locus is of interest in breeding for reduced P concentrations and the most promising locus was at 20.7 Mb on chromosome 8, where a rare haplotype that was absent from all modern varieties studied reduced grain P concentration by 9.3%. This and all other loci were not consistently detected across environments or association panels, confirming that genetic effects were small compared to effects of environment. We conclude that the genetic effects detected were not sufficiently large or consistent to be of utility in plant breeding. Instead breeding efforts may have to rely on small to medium effect mutants already identified and attempt to achieve a more pronounced reduction in grain P concentration through the introgression of these mutants into a single genetic background. PMID:28651022

Structural efficiency studies of corrugated compression panels with curved caps and beaded webs

NASA Technical Reports Server (NTRS)

Davis, R. C.; Mills, C. T.; Prabhakaran, R.; Jackson, L. R.

1984-01-01

Curved cross-sectional elements are employed in structural concepts for minimum-mass compression panels. Corrugated panel concepts with curved caps and beaded webs are optimized by using a nonlinear mathematical programming procedure and a rigorous buckling analysis. These panel geometries are shown to have superior structural efficiencies compared with known concepts published in the literature. Fabrication of these efficient corrugation concepts became possible by advances made in the art of superplastically forming of metals. Results of the mass optimization studies of the concepts are presented as structural efficiency charts for axial compression.

Active magnetic compensation composed of shielding panels.

PubMed

Kato, K; Yamazaki, K; Sato, T; Haga, A; Okitsu, T; Muramatsu, K; Ueda, T; Kobayashi, K; Yoshizawa, M

2004-11-30

Magnetically shielded rooms (MSRs) with materials of high permeability and active shield systems have been used to shield magnetic noise for biomagnetic measurements up to now. However, these techniques have various disadvantages. Therefore, we have developed a new shielding system composed of shielding panels using an active compensation technique. In this study, we evaluated the shielding performance of several unit panels attached together. Numerical and experimental approaches indicated that the shielding factor of a cubic model composed of 24 panels was 17 for uniform fields, and 7 for disturbances due to car movement. Furthermore, the compensation space is larger than that of an ordinary active system using large coils rather than panels. Moreover, the new active compensation system has the important advantage that panels of any shape can be assembled for occasional use because the unit panels are small and light.

Multi-objective optimal design of sandwich panels using a genetic algorithm

NASA Astrophysics Data System (ADS)

Xu, Xiaomei; Jiang, Yiping; Pueh Lee, Heow

2017-10-01

In this study, an optimization problem concerning sandwich panels is investigated by simultaneously considering the two objectives of minimizing the panel mass and maximizing the sound insulation performance. First of all, the acoustic model of sandwich panels is discussed, which provides a foundation to model the acoustic objective function. Then the optimization problem is formulated as a bi-objective programming model, and a solution algorithm based on the non-dominated sorting genetic algorithm II (NSGA-II) is provided to solve the proposed model. Finally, taking an example of a sandwich panel that is expected to be used as an automotive roof panel, numerical experiments are carried out to verify the effectiveness of the proposed model and solution algorithm. Numerical results demonstrate in detail how the core material, geometric constraints and mechanical constraints impact the optimal designs of sandwich panels.

Practical Applications of a Space Station

NASA Technical Reports Server (NTRS)

1984-01-01

The potential uses of a special station for civil and commercial applications is examined. Five panels of experts representing user-oriented communities, and a sixth panel which dealth with system design considerations, based their studies on the assumption that the station would be a large platform, capable of housing a wide array of diverse instruments, and could be either manned or unmanned. The Earth's Resources Panel dealt with applications of remote sensing for resource assessment. The Earth's Environment Panel dealt with the Earth's atmosphere and its impact on society. The Ocean Operations Panel looked at both science and applications. The Satellite Communications Panel assessed the potential role of a space station in the evolution of commercial telecommunication services up to the year 2000. The Materials Science and Engineering panel focused on the utility of a space station environment for materials processing.

Theoretical prediction on corrugated sandwich panels under bending loads

NASA Astrophysics Data System (ADS)

Shu, Chengfu; Hou, Shujuan

2018-05-01

In this paper, an aluminum corrugated sandwich panel with triangular core under bending loads was investigated. Firstly, the equivalent material parameters of the triangular corrugated core layer, which could be considered as an orthotropic panel, were obtained by using Castigliano's theorem and equivalent homogeneous model. Secondly, contributions of the corrugated core layer and two face panels were both considered to compute the equivalent material parameters of the whole structure through the classical lamination theory, and these equivalent material parameters were compared with finite element analysis solutions. Then, based on the Mindlin orthotropic plate theory, this study obtain the closed-form solutions of the displacement for a corrugated sandwich panel under bending loads in specified boundary conditions, and parameters study and comparison by the finite element method were executed simultaneously.

My Brother’s Keeper National Lab Week

NASA Image and Video Library

2016-03-02

Harold (Russ) McAmis demonstrates machinery inside NASA Kennedy Space Center’s Prototype Lab for students in the My Brother’s Keeper program. The Florida spaceport is one of six NASA centers that participated in My Brother’s Keeper National Lab Week. The event is a nationwide effort to bring youth from underrepresented communities into federal labs and centers for hands-on activities, tours and inspirational speakers. Sixty students from the nearby cities of Orlando and Sanford visited Kennedy, where they toured the Vehicle Assembly Building, the Space Station Processing Facility and the center’s innovative Swamp Works Labs. The students also had a chance to meet and ask questions of a panel of subject matter experts from across Kennedy.

Heterogeneity and Risk Sharing in Village Economies*

PubMed Central

Chiappori, Pierre-André; Samphantharak, Krislert; Schulhofer-Wohl, Sam; Townsend, Robert M.

2013-01-01

We show how to use panel data on household consumption to directly estimate households’ risk preferences. Specifically, we measure heterogeneity in risk aversion among households in Thai villages using a full risk-sharing model, which we then test allowing for this heterogeneity. There is substantial, statistically significant heterogeneity in estimated risk preferences. Full insurance cannot be rejected. As the risk sharing, as-if-complete-markets theory might predict, estimated risk preferences are unrelated to wealth or other characteristics. The heterogeneity matters for policy: Although the average household would benefit from eliminating village-level risk, less-risk-averse households who are paid to absorb that risk would be worse off by several percent of household consumption. PMID:24932226

The Tsimane' Amazonian Panel Study (TAPS): Nine years (2002-2010) of annual data available to the public.

PubMed

Leonard, William R; Reyes-García, Victoria; Tanner, Susan; Rosinger, Asher; Schultz, Alan; Vadez, Vincent; Zhang, Rebecca; Godoy, Ricardo

2015-12-01

This brief communication contains a description of the 2002-2010 annual panel collected by the Tsimane' Amazonian Panel Study team. The study took place among the Tsimane', a native Amazonian society of forager-horticulturalists. The team tracked a wide range of socio-economic and anthropometric variables from all residents (633 adults ≥16 years; 820 children) in 13 villages along the Maniqui River, Department of Beni. The panel is ideally suited to examine how market exposure and modernization affect the well-being of a highly autarkic population and to examine human growth in a non-Western rural setting. Copyright © 2015 Elsevier B.V. All rights reserved.

Sound transmission through a double panel structure periodically coupled with vibration insulators

NASA Astrophysics Data System (ADS)

Legault, Julien; Atalla, Noureddine

2010-07-01

In this paper, sound transmission through an aircraft sidewall representative double panel structure is investigated theoretically and parametric and validation studies are conducted. The studied configuration is composed of a trim panel (receiver side panel) attached to a ribbed skin panel (source side panel) with periodically spaced resilient mounts. The structure is considered infinite in order to use space harmonic expansion. The partition is also assumed planar for simplicity. The model allows for a 3D incident field and the panels can be metallic and/or composite. A four-pole formulation is employed for modeling of the mounts and the absorption provided by the fiberglass that fills the cavity between the leaves is addressed with an equivalent fluid model. The investigation of mount stiffness, damping and spacing show that properly designed mounts can increase the TL significantly (up to 20 dB of difference between rigid and resilient mounts). However, they can create undesirable resonances resulting from their interaction with the panels. The influence of cavity absorption is also studied and results illustrate the fact that it is not worth investing in a highly absorbent fiber if the structure-borne transmission path is not adequately insulated, and likewise that it is not worth investing in highly resilient mounts without sufficient cavity absorption. Moreover, the investigation of panel damping confirms that when structure-borne transmission is present, raising skin damping can increase the TL even below coincidence, but that on average, greater improvements are achieved by raising trim damping. Finally, comparison between the periodic model and finite element simulations for structure-borne transmission shows that the average level of transmitted energy is well reproduced with the periodic approach. However, the modes are only captured approximately due to the assumption of an infinite structure.

The Influence of Mesh Density on the Impact Response of a Shuttle Leading-Edge Panel Finite Element Simulation

NASA Technical Reports Server (NTRS)

Jackson, Karen E.; Fasanella, Edwin L.; Lyle, Karen H.; Spellman, Regina L.

2004-01-01

A study was performed to examine the influence of varying mesh density on an LS-DYNA simulation of a rectangular-shaped foam projectile impacting the space shuttle leading edge Panel 6. The shuttle leading-edge panels are fabricated of reinforced carbon-carbon (RCC) material. During the study, nine cases were executed with all possible combinations of coarse, baseline, and fine meshes of the foam and panel. For each simulation, the same material properties and impact conditions were specified and only the mesh density was varied. In the baseline model, the shell elements representing the RCC panel are approximately 0.2-in. on edge, whereas the foam elements are about 0.5-in. on edge. The element nominal edge-length for the baseline panel was halved to create a fine panel (0.1-in. edge length) mesh and doubled to create a coarse panel (0.4-in. edge length) mesh. In addition, the element nominal edge-length of the baseline foam projectile was halved (0.25-in. edge length) to create a fine foam mesh and doubled (1.0- in. edge length) to create a coarse foam mesh. The initial impact velocity of the foam was 775 ft/s. The simulations were executed in LS-DYNA version 960 for 6 ms of simulation time. Contour plots of resultant panel displacement and effective stress in the foam were compared at five discrete time intervals. Also, time-history responses of internal and kinetic energy of the panel, kinetic and hourglass energy of the foam, and resultant contact force were plotted to determine the influence of mesh density. As a final comparison, the model with a fine panel and fine foam mesh was executed with slightly different material properties for the RCC. For this model, the average degraded properties of the RCC were replaced with the maximum degraded properties. Similar comparisons of panel and foam responses were made for the average and maximum degraded models.

Study on a novel panel support concept for radio telescopes with active surface

NASA Astrophysics Data System (ADS)

Yang, Dehua; Zhou, Guohua; Okoh, Daniel; Li, Guoping; Cheng, Jingquan

2010-07-01

Generally, panels of radio telescopes are mainly shaped in trapezoid and each is supported/positioned by four adjustors beneath its vertexes. Such configuration of panel supporting system is essentially hyper-static, and the panel is overconstrained from a kinematic point of view. When the panel is to be adjusted and/or actuated, it will suffer stress from its adjusters and hence its shape is to be distorted. This situation is not desirable for high precision panels, such as glass based panels especially used for sub-millimeter and shorter wavelength telescopes with active optics/active panel technology. This paper began with a general overview of panel patterns and panel supports of existing radio telescopes. Thereby, we proposed a preferable master-slave active surface concept for triangular and/or hexagonal panel pattern. In addition, we carry out panel error sensitivity analysis for all the 6 degrees of freedom (DOF) of a panel to identify what DOFs are most sensitive for an active surface. And afterwards, based on the error sensitivity analysis, we suggested an innovative parallel-series concept hexapod well fitted for an active panel to correct for all of its 6 rigid errors. A demonstration active surface using the master-slave concept and the hexapod manifested a great save in cost, where only 486 precision actuators are needed for 438 panels, which is 37% of those actuators needed by classic segmented mirror active optics. Further, we put forward a swaying-arm based design concept for the related connecting joints between panels, which ensures that all the panels attached on to it free from over-constraints when they are positioned and/or actuated. Principle and performance of the swaying-arm connecting mechanism are elaborated before a practical cablemesh based prototype active surface is presented with comprehensive finite element analysis and simulation.

Development of fire-resistant wood structural panels

NASA Technical Reports Server (NTRS)

Vaughan, T. W.; Etzold, R.

1977-01-01

Structural panels made with Xylok 210 resin as the binder had a burn-through resistance at least equal to the structural panels made with Kerimid 500. Therefore, because of its comparative ease of handling, Xylok 210 was selected as the resin binder to provide the baseline panel for the study of a means of improving the flame-spread resistance of the structural panels. The final resin-filler system consisted of Xylok 210 binder with the addition of ammonium oxalate and ammonium phosphate to the strands of the surface layers, using 24% of each salt based upon the air-dry weight of the strands. This system resulted in a panel with a flame-spread code of about 60, a Class 2 classification. A standard phenolic based structural panel had a flame-spread greater than 200 for laboratory prepared panels. The burn-through tests indicated an average burn-through time of 588 seconds for the specimens made with the final system. This compares to an average burn-through time of 287 seconds for the standard phenolic base structural specimen. One full-size panel was made with the final system.

A panel of ancestry informative markers to estimate and correct potential effects of population stratification in Han Chinese.

PubMed

Qin, Pengfei; Li, Zhiqiang; Jin, Wenfei; Lu, Dongsheng; Lou, Haiyi; Shen, Jiawei; Jin, Li; Shi, Yongyong; Xu, Shuhua

2014-02-01

Population stratification acts as a confounding factor in genetic association studies and may lead to false-positive or false-negative results. Previous studies have analyzed the genetic substructures in Han Chinese population, the largest ethnic group in the world comprising ∼20% of the global human population. In this study, we examined 5540 Han Chinese individuals with about 1 million single-nucleotide polymorphisms (SNPs) and screened a panel of ancestry informative markers (AIMs) to facilitate the discerning and controlling of population structure in future association studies on Han Chinese. Based on genome-wide data, we first confirmed our previous observation of the north-south differentiation in Han Chinese population. Second, we developed a panel of 150 validated SNP AIMs to determine the northern or southern origin of each Han Chinese individual. We further evaluated the performance of our AIMs panel in association studies in simulation analysis. Our results showed that this AIMs panel had sufficient power to discern and control population stratification in Han Chinese, which could significantly reduce false-positive rates in both genome-wide association studies (GWAS) and candidate gene association studies (CGAS). We suggest this AIMs panel be genotyped and used to control and correct population stratification in the study design or data analysis of future association studies, especially in CGAS which is the most popular approach to validate previous reports on genetic associations of diseases in post-GWAS era.

Radiated Sound Power from a Curved Honeycomb Panel

NASA Technical Reports Server (NTRS)

Robinson, Jay H.; Buehrle, Ralph D.; Klos, Jacob; Grosveld, Ferdinand W.

2003-01-01

The validation of finite element and boundary element model for the vibro-acoustic response of a curved honeycomb core composite aircraft panel is completed. The finite element and boundary element models were previously validated separately. This validation process was hampered significantly by the method in which the panel was installed in the test facility. The fixture used was made primarily of fiberboard and the panel was held in a groove in the fiberboard by a compression fitting made of plastic tubing. The validated model is intended to be used to evaluate noise reduction concepts from both an experimental and analytic basis simultaneously. An initial parametric study of the influence of core thickness on the radiated sound power from this panel, using this numerical model was subsequently conducted. This study was significantly influenced by the presence of strong boundary condition effects but indicated that the radiated sound power from this panel was insensitive to core thickness primarily due to the offsetting effects of added mass and added stiffness in the frequency range investigated.

Nondestructive evaluation and characterization of damage and repair to continuous-fiber ceramic composite panels.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sun, J. G.; Petrak, D. R.; Pillai, T. A. K.

1998-04-01

Continuous fiber ceramic matrix composites are currently being developed for a variety of high-temperature applications. Because of the high costs of making these components, minor damage incurred during manufacturing or operation must be rewired in order to extend the life of the components. In this study, five ceramic-grade Nicalon{trademark} fiber/SiNC-matrix composite panels were intentionally damaged with a pendulum-type impactor during an impact test. The damaged panels were then repaired at Dow Corning Corporation. Three nondestructive evaluation (NDE) methods were used to study the characteristics of the panels after the damage and again after the panels were repaired. The NDE methodsmore » were X-ray radiography, infrared thermal imaging, and air-coupled ultrasound. The results showed that the impact test induced various types of damage in the panels. The NDE data that were obtained by the three NDE methods were correlated with each other.« less

Selection bias of Internet panel surveys: a comparison with a paper-based survey and national governmental statistics in Japan.

PubMed

Tsuboi, Satoshi; Yoshida, Honami; Ae, Ryusuke; Kojo, Takao; Nakamura, Yosikazu; Kitamura, Kunio

2015-03-01

To investigate the selection bias of an Internet panel survey organized by a commercial company. A descriptive study was conducted. The authors compared the characteristics of the Internet panel survey with a national paper-based survey and with national governmental statistics in Japan. The participants in the Internet panel survey were composed of more women, were older, and resided in large cities. Regardless of age and sex, the prevalence of highly educated people in the Internet panel survey was higher than in the paper-based survey and the national statistics. In men, the prevalence of heavy drinkers among the 30- to 49-year-old population and of habitual smokers among the 20- to 49-year-old population in the Internet panel survey was lower than what was found in the national statistics. The estimated characteristics of commercial Internet panel surveys were quite different from the national statistical data. In a commercial Internet panel survey, selection bias should not be underestimated. © 2012 APJPH.

Solar panel thermal cycling testing by solar simulation and infrared radiation methods

NASA Technical Reports Server (NTRS)

Nuss, H. E.

1980-01-01

For the solar panels of the European Space Agency (ESA) satellites OTS/MAROTS and ECS/MARECS the thermal cycling tests were performed by using solar simulation methods. The performance data of two different solar simulators used and the thermal test results are described. The solar simulation thermal cycling tests for the ECS/MARECS solar panels were carried out with the aid of a rotatable multipanel test rig by which simultaneous testing of three solar panels was possible. As an alternative thermal test method, the capability of an infrared radiation method was studied and infrared simulation tests for the ultralight panel and the INTELSAT 5 solar panels were performed. The setup and the characteristics of the infrared radiation unit using a quartz lamp array of approx. 15 sq and LN2-cooled shutter and the thermal test results are presented. The irradiation uniformity, the solar panel temperature distribution, temperature changing rates for both test methods are compared. Results indicate the infrared simulation is an effective solar panel thermal testing method.

Boundary element analyses for sound transmission loss of panels.

PubMed

Zhou, Ran; Crocker, Malcolm J

2010-02-01

The sound transmission characteristics of an aluminum panel and two composite sandwich panels were investigated by using two boundary element analyses. The effect of air loading on the structural behavior of the panels is included in one boundary element analysis, by using a light-fluid approximation for the eigenmode series to evaluate the structural response. In the other boundary element analysis, the air loading is treated as an added mass. The effect of the modal energy loss factor on the sound transmission loss of the panels was investigated. Both boundary element analyses were used to study the sound transmission loss of symmetric sandwich panels excited by a random incidence acoustic field. A classical wave impedance analysis was also used to make sound transmission loss predictions for the two foam-filled honeycomb sandwich panels. Comparisons between predictions of sound transmission loss for the two foam-filled honeycomb sandwich panels excited by a random incidence acoustic field obtained from the wave impedance analysis, the two boundary element analyses, and experimental measurements are presented.

Using Panel Vendors for Recruitment Into a Web-Based Family Prevention Program: Methodological Considerations.

PubMed

Wang-Schweig, Meme; Miller, Brenda A; Buller, David B; Byrnes, Hilary F; Bourdeau, Beth; Rogers, Veronica

2017-01-01

Use of online panel vendors in research has grown over the past decade. Panel vendors are organizations that recruit participants into a panel to take part in web-based surveys and match panelists to a target audience for data collection. We used two panel vendors to recruit families ( N = 411) with a 16- to 17-year-old teen to participate in a randomized control trial (RCT) of an online family-based program to prevent underage drinking and risky sexual behaviors. Our article addresses the following research questions: (1) How well do panel vendors provide a sample of families who meet our inclusion criteria to participate in a RCT? (2) How well do panel vendors provide a sample of families who reflect the characteristics of the general population? and (3) Does the choice of vendor influence the characteristics of families that we engage in research? Despite the screening techniques used by the panel vendors to identify families who met our inclusion criteria, 23.8% were found ineligible when research staff verified their eligibility by direct telephone contact. Compared to the general U.S. population, our sample had more Whites and more families with higher education levels. Finally, across the two panel vendors, there were no significant differences in the characteristics of families, except for mean age. The online environment provides opportunities for new methods to recruit participants in research studies. However, innovative recruitment methods need careful study to ensure the quality of their samples.

Dimensional stability of curved panels with cocured stiffeners and cobonded frames

NASA Technical Reports Server (NTRS)

Mabson, G. E.; Flynn, B. W.; Swanson, G. D.; Lundquist, R. C.; Rupp, P. L.

1993-01-01

Closed form and finite element analyses are presented for axial direction and transverse direction dimensional stability of skin/stringer panels. Several sensitivity studies are presented to illustrate the influence of various design parameters on the dimensional stability of these panels. Panel geometry, material properties (stiffness and coefficient of thermal expansion), restraint conditions and local details, such as resin fillets, all combine to influence dimensional stability, residual and assembly forces.

Performance comparison of single axis tracking and 40° solar panels for sunny weather

NASA Astrophysics Data System (ADS)

Chua, Yaw Long; Yong, Yoon Kuang; Koh, Yit Yan

2017-09-01

The rapid increment in human population and economy growth had led to the rise of the energy demand globally. With the rapid diminishing fossil fuels based energy sources, renewable energy sources had been introduced due to its unlimited availability especially solar energy which is a sustainable and reliable energy. This research was conducted to study and compare the efficiency of the single axis tracking solar panel with a 40° inclined angle solar panel in sunny weather condition. The results indicated that the output generated by the solar panel was directly affected by the angle which the solar panel facing the sun. In terms of performance the single axis tracking solar panel emerged to be more efficient with greater energy generated.

Behavior of sandwich panels subjected to bending fatigue, axial compression loading and in-plane bending

NASA Astrophysics Data System (ADS)

Mathieson, Haley Aaron

This thesis investigates experimentally and analytically the structural performance of sandwich panels composed of glass fibre reinforced polymer (GFRP) skins and a soft polyurethane foam core, with or without thin GFRP ribs connecting skins. The study includes three main components: (a) out-of-plane bending fatigue, (b) axial compression loading, and (c) in-plane bending of sandwich beams. Fatigue studies included 28 specimens and looked into establishing service life (S-N) curves of sandwich panels without ribs, governed by soft core shear failure and also ribbed panels governed by failure at the rib-skin junction. Additionally, the study compared fatigue life curves of sandwich panels loaded under fully reversed bending conditions (R=-1) with panels cyclically loaded in one direction only (R=0) and established the stiffness degradation characteristics throughout their fatigue life. Mathematical models expressing fatigue life and stiffness degradation curves were calibrated and expanded forms for various loading ratios were developed. Approximate fatigue thresholds of 37% and 23% were determined for non-ribbed panels loaded at R=0 and -1, respectively. Digital imaging techniques showed significant shear contribution significantly (90%) to deflections if no ribs used. Axial loading work included 51 specimens and examined the behavior of panels of various lengths (slenderness ratios), skin thicknesses, and also panels of similar length with various rib configurations. Observed failure modes governing were global buckling, skin wrinkling or skin crushing. In-plane bending involved testing 18 sandwich beams of various shear span-to-depth ratios and skin thicknesses, which failed by skin wrinkling at the compression side. The analytical modeling components of axially loaded panels include; a simple design-oriented analytical failure model and a robust non-linear model capable of predicting the full load-displacement response of axially loaded slender sandwich panels, accounting for P-Delta effects, inherent out-of-straightness profile of any shape at initial conditions, and the excessive shear deformation of soft core and its effect on buckling capacity. Another model was developed to predict the load-deflection response and failure modes of in-plane loaded sandwich beams. After successful verification of the models using experimental results, comprehensive parametric studies were carried out using these models to cover parameters beyond the limitations of the experimental program.

Supporting public involvement in interview and other panels: a systematic review.

PubMed

Baxter, Susan; Clowes, Mark; Muir, Delia; Baird, Wendy; Broadway-Parkinson, Andrea; Bennett, Carole

2017-10-01

Members of the public are increasingly being invited to become members of a variety of different panels and boards. This study aimed to systematically search the literature to identify studies relating to support or training provided to members of the public who are asked to be members of an interview panel. A systematic search for published and unpublished studies was carried out from June to September 2015. The search methods included electronic database searching, reference list screening, citation searching and scrutinizing online sources. We included studies of any design including published and unpublished documents which outlined preparation or guidance relating to public participants who were members of interview panels or representatives on other types of panels or committees. Results were synthesised via narrative methods. Thirty-six documents were included in the review. Scrutiny of this literature highlighted ten areas which require consideration when including members of the public on interview panels: financial resources; clarity of role; role in the interview process; role in evaluation; training; orientation/induction; information needs; terminology; support; and other public representative needs such as timing, accessibility and support with information technology. The results of the review emphasize a range of elements that need to be fully considered when planning the involvement of public participants on interview panels. It highlights potential issues relating to the degree of involvement of public representatives in evaluating/grading decisions and the need for preparation and on-going support. © 2016 The Authors. Health Expectations Published by John Wiley & Sons Ltd.

Passive wall cooling panel with phase change material as a cooling agent

NASA Astrophysics Data System (ADS)

Majid, Masni A.; Tajudin, Rasyidah Ahmad; Salleh, Norhafizah; Hamid, Noor Azlina Abd

2017-11-01

The study was carried out to the determine performance of passive wall cooling panels by using Phase Change Materials as a cooling agent. This passive cooling system used cooling agent as natural energy storage without using any HVAC system. Eight full scale passive wall cooling panels were developed with the size 1500 mm (L) × 500 mm (W) × 100 mm (T). The cooling agent such as glycerine were filled in the tube with horizontal and vertical arrangement. The passive wall cooling panels were casting by using foamed concrete with density between 1200 kg/m3 - 1500 kg/m3. The passive wall cooling panels were tested in a small house and the differences of indoor and outdoor temperature was recorded. Passive wall cooling panels with glycerine as cooling agent in vertical arrangement showed the best performance with dropped of indoor air temperature within 3°C compared to outdoor air temperature. The lowest indoor air temperature recorded was 25°C from passive wall cooling panels with glycerine in vertical arrangement. From this study, the passive wall cooling system could be applied as it was environmental friendly and less maintenance.

Heat Conductivity Resistance of Concrete Wall Panel by Water Flowing in Different Orientations of Internal PVC pipe

NASA Astrophysics Data System (ADS)

Umi, N. N.; Norazman, M. N.; Daud, N. M.; Yusof, M. A.; Yahya, M. A.; Othman, M.

2018-04-01

Green building technology and sustainability development is current focus in the world nowadays. In Malaysia and most tropical countries the maximum temperature recorded typically at 35°C. Air-conditioning system has become a necessity in occupied buildings, thereby increasing the cost of electric consumption. The aim of this study is to find out the solution in minimizing heat transfer from the external environment and intentions towards going green. In this study, the experimental work includes testing three types of concrete wall panels. The main heat intervention material in this research is 2 inch diameter Polyvinyl Chloride (PVC) pipe embedded at the center of the concrete wall panel, while the EPS foam beads were added to the cement content in the concrete mix forming the outer layer of the wall panel. Water from the rainwater harvesting system is regulated in the PVC pipe to intervene with the heat conductivity through the wall panel. Results from the experimental works show that the internal surface temperature of these heat resistance wall panels is to 3□C lower than control wall panel from plain interlocking bricks.

Optimal angle of polycrystalline silicon solar panels placed in a building using the ant colony optimization algorithm

NASA Astrophysics Data System (ADS)

Saouane, I.; Chaker, A.; Zaidi, B.; Shekhar, C.

2017-03-01

This paper describes the mathematical model used to determine the amount of solar radiation received on an inclined solar photovoltaic panel. The optimum slope angles for each month, season, and year have also been calculated for a solar photovoltaic panel. The optimization of the procedure to maximize the solar energy collected by the solar panel by varying the tilt angle is also presented. As a first step, the global solar radiation on the horizontal surface of a thermal photovoltaic panel during clear sky is estimated. Thereafter, the Muneer model, which provides the most accurate estimation of the total solar radiation at a given geographical point has been used to determine the optimum collector slope. Also, the Ant Colony Optimization (ACO) algorithm was applied to obtain the optimum tilt angle settings for PV collector to improve the PV collector efficiency. The results show good agreement between calculated and predicted results. Additionally, this paper presents studies carried out on the polycrystalline silicon solar panels for electrical energy generation in the city of Ghardaia. The electrical energy generation has been studied as a function of amount of irradiation received and the angle of optimum orientation of the solar panels.

78 FR 55253 - Notification of Public Teleconference of the Hydraulic Fracturing Research Advisory Panel

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-10

... research described in ORD's Study of the Potential Impacts of Hydraulic Fracturing on Drinking Water... Hydraulic Fracturing Research Advisory Panel AGENCY: Environmental Protection Agency (EPA). ACTION: Notice... public teleconference of the Hydraulic Fracturing Research Advisory Panel to receive written and oral...

New method to determine the total carbonyl functional group content in extractable particulate organic matter by tandem mass spectrometry.

PubMed

Dron, J; Zheng, W; Marchand, N; Wortham, H

2008-08-01

A functional group analysis method was developed to determine the quantitative content of carbonyl functional groups in atmospheric particulate organic matter (POM) using constant neutral loss scanning-tandem mass spectrometry (CNLS-MS/MS). The neutral loss method consists in monitoring the loss of a neutral fragment produced by the fragmentation of a precursor ion in a collision cell. The only ions detected are the daughter ions resulting from the loss of the neutral fragment under study. Then, scanning the loss of a neutral fragment characteristic of a functional group enables the selective detection of the compounds bearing the chemical function under study within a complex mixture. The selective detection of carbonyl functional groups was achieved after derivatization with pentafluorophenylhydrazine (PFPH) by monitoring the neutral loss of C(6)F(5)N (181 amu), which was characteristic of a large panel of derivatized carbonyl compounds. The method was tested on 25 reference mixtures of different composition, all containing 24 carbonyl compounds at randomly determined concentrations. The repeatability and calibration tests were satisfying as they resulted in a relative standard deviation below 5% and a linear range between 0.01 and 0.65 mM with a calculated detection limit of 0.0035 mM. Also, the relative deviation induced by changing the composition of the mixture while keeping the total concentration of carbonyl functional groups constant was less than 20%. These reliability experiments demonstrate the high robustness of the developed procedure for accurate carbonyl functional group measurement, which was applied to atmospheric POM samples. Copyright (c) 2008 John Wiley & Sons, Ltd.

Initial development of high-accuracy CFRP panel for DATE5 antenna

NASA Astrophysics Data System (ADS)

Qian, Yuan; Lou, Zheng; Hao, Xufeng; Zhu, Jing; Cheng, Jingquan; Wang, Hairen; Zuo, Yingxi; Yang, Ji

2016-07-01

DATE5 antenna, which is a 5m telescope for terahertz exploration, will be sited at Dome A, Antarctica. It is necessary to keep high surface accuracy of the primary reflector panels so that high observing efficiency can be achieved. In antenna field, carbon fiber reinforced composite (CFRP) sandwich panels are widely used as these panels are light in weight, high in strength, low in thermal expansion, and cheap in mass fabrication. In DATE5 project, CFRP panels are important panel candidates. In the design study phase, a CFRP prototype panel of 1-meter size is initially developed for the verification purpose. This paper introduces the material arrangement in the sandwich panel, measured performance of this testing sandwich structure samples, and together with the panel forming process. For anti-icing in the South Pole region, a special CFRP heating film is embedded in the front skin of sandwich panel. The properties of some types of basic building materials are tested. Base on the results, the deformation of prototype panel with different sandwich structures and skin layers are simulated and a best structural concept is selected. The panel mold used is a high accuracy one with a surface rms error of 1.4 μm. Prototype panels are replicated from the mold. Room temperature curing resin is used to reduce the thermal deformation in the resin transfer process. In the curing, vacuum negative pressure technology is also used to increase the volume content of carbon fiber. After the measurement of the three coordinate measure machine (CMM), a prototype CFRP panel of 5.1 μm rms surface error is developed initially.

Effect of panel shape of soccer ball on its flight characteristics

PubMed Central

Hong, Sungchan; Asai, Takeshi

2014-01-01

Soccer balls are typically constructed from 32 pentagonal and hexagonal panels. Recently, however, newer balls named Cafusa, Teamgeist 2, and Jabulani were respectively produced from 32, 14, and 8 panels with shapes and designs dramatically different from those of conventional balls. The newest type of ball, named Brazuca, was produced from six panels and will be used in the 2014 FIFA World Cup in Brazil. There have, however, been few studies on the aerodynamic properties of balls constructed from different numbers and shapes of panels. Hence, we used wind tunnel tests and a kick-robot to examine the relationship between the panel shape and orientation of modern soccer balls and their aerodynamic and flight characteristics. We observed a correlation between the wind tunnel test results and the actual ball trajectories, and also clarified how the panel characteristics affected the flight of the ball, which enabled prediction of the trajectory. PMID:24875291

Effect of panel shape of soccer ball on its flight characteristics

NASA Astrophysics Data System (ADS)

Hong, Sungchan; Asai, Takeshi

2014-05-01

Soccer balls are typically constructed from 32 pentagonal and hexagonal panels. Recently, however, newer balls named Cafusa, Teamgeist 2, and Jabulani were respectively produced from 32, 14, and 8 panels with shapes and designs dramatically different from those of conventional balls. The newest type of ball, named Brazuca, was produced from six panels and will be used in the 2014 FIFA World Cup in Brazil. There have, however, been few studies on the aerodynamic properties of balls constructed from different numbers and shapes of panels. Hence, we used wind tunnel tests and a kick-robot to examine the relationship between the panel shape and orientation of modern soccer balls and their aerodynamic and flight characteristics. We observed a correlation between the wind tunnel test results and the actual ball trajectories, and also clarified how the panel characteristics affected the flight of the ball, which enabled prediction of the trajectory.

Will the leading firm continue to dominate the market in the Taiwan notebook industry?

NASA Astrophysics Data System (ADS)

Chu, Hsiao-Ping; Yeh, Ming-Liang; Sher, Peter J.; Chiu, Yi-Chia

2007-09-01

This study investigates whether the market share leader in the notebook industry in Taiwan is likely to maintain its dominant position. Market share data are used to investigate the intensity of competitiveness in the industry, and data on the gap in market shares are employed to elucidate the dominance of the leading firm in Taiwan's notebook industry during the 1998-2004 period. The newly developed Panel SURADF tests advanced by Breuer et al. [Misleading inferences from panel unit root tests with an illustration from purchasing power parity, Rev. Int. Econ. 9 (3) (2001) 482-493] are employed to determine whether the market share gap is stationary or not. Unlike other panel-based unit root tests which are joint tests of a unit root for all members of a panel and are incapable of determining the mix of I(0) and I(1) series in a panel setting, the Panel SURADF tests have the advantage of being able to investigate a separate unit root null hypothesis for each individual panel member and are, therefore, able to identify how many and which series in a panel are stationary processes. The empirical results from several panel-based unit root tests substantiate that the market shares of the firms studied here are non-stationary, indicating that Taiwan's notebook industry is highly competitive; however, Breuer et al.'s [12] Panel SURADF tests unequivocally show that only Compal is stationary with respect to market share gap. In terms of sales volume, Compal is the second largest firm in the notebook industry in Taiwan, and the results indicate that it alone has the opportunity to become the market share leader in the notebook industry.

Selection of population controls for a Salmonella case-control study in the UK using a market research panel and web-survey provides time and resource savings.

PubMed

Mook, P; Kanagarajah, S; Maguire, H; Adak, G K; Dabrera, G; Waldram, A; Freeman, R; Charlett, A; Oliver, I

2016-04-01

Timely recruitment of population controls in infectious disease outbreak investigations is challenging. We evaluated the timeliness and cost of using a market research panel as a sampling frame for recruiting controls in a case-control study during an outbreak of Salmonella Mikawasima in the UK in 2013. We deployed a web-survey by email to targeted members of a market research panel (panel controls) in parallel to the outbreak control team interviewing randomly selected public health staff by telephone and completing paper-based questionnaires (staff controls). Recruitment and completion of exposure history web-surveys for panel controls (n = 123) took 14 h compared to 15 days for staff controls (n = 82). The average staff-time cost per questionnaire for staff controls was £13·13 compared to an invoiced cost of £3·60 per panel control. Differences in the distribution of some exposures existed between these control groups but case-control studies using each group found that illness was associated with consumption of chicken outside of the home and chicken from local butchers. Recruiting market research panel controls offers time and resource savings. More rapid investigations would enable more prompt implementation of control measures. We recommend that this method of recruiting controls is considered in future investigations and assessed further to better understand strengths and limitations.

Computational and experimental studies of microvascular void features for passive-adaptation of structural panel dynamic properties

NASA Astrophysics Data System (ADS)

Sears, Nicholas C.; Harne, Ryan L.

2018-01-01

The performance, integrity, and safety of built-up structural systems are critical to their effective employment in diverse engineering applications. In conflict with these goals, harmonic or random excitations of structural panels may promote large amplitude oscillations that are particularly harmful when excitation energies are concentrated around natural frequencies. This contributes to fatigue concerns, performance degradation, and failure. While studies have considered active or passive damping treatments that adapt material characteristics and configurations for structural control, it remains to be understood how vibration properties of structural panels may be tailored via internal material transitions. Motivated to fill this knowledge gap, this research explores an idea of adapting the static and dynamic material distribution of panels through embedded microvascular channels and strategically placed voids that permit the internal movement of fluids within the panels for structural dynamic control. Finite element model and experimental investigations probe how redistributing material in the form of microscale voids influences the global vibration modes and natural frequencies of structural panels. Through parameter studies, the relationships among void shape, number, size, and location are quantified towards their contribution to the changing structural dynamics. For the panel composition and boundary conditions considered in this report, the findings reveal that transferring material between strategically placed voids may result in eigenfrequency changes as great as 10.0, 5.0, and 7.4% for the first, second, and third modes, respectively.

Study of low-velocity impact response of sandwich panels with shear-thickening gel cores

NASA Astrophysics Data System (ADS)

Wang, Yunpeng; Gong, Xinglong; Xuan, Shouhu

2018-06-01

The low-velocity impact response of sandwich panels with shear-thickening gel cores was studied. The impact tests indicated that the sandwich panels with shear-thickening gel cores showed excellent properties of energy dissipation and stress distribution. In comparison to the similar sandwich panels with chloroprene rubber cores and ethylene-propylene-diene monomer cores, the shear-thickening gel cores led to the obviously smaller contact forces and the larger energy absorptions. Numerical modelling with finite element analysis was used to investigate the stress distribution of the sandwich panels with shear-thickening gel cores and the results agreed well with the experimental results. Because of the unique mechanical property of the shear-thickening gel, the concentrated stress on the front facesheets were distributed to larger areas on the back facesheets and the peak stresses were reduced greatly.

Quantitative study of sniffer leak rate and pressure drop leak rate of liquid nitrogen panels of SST-1 tokamak

NASA Astrophysics Data System (ADS)

Pathan, F. S.; Khan, Z.; Semwal, P.; Raval, D. C.; Joshi, K. S.; Thankey, P. L.; Dhanani, K. R.

2008-05-01

Steady State Super-conducting (SST-1) Tokamak is in commissioning stage at Institute for Plasma Research. Vacuum chamber of SST-1 Tokamak consists of 1) Vacuum vessel, an ultra high vacuum (UHV) chamber, 2) Cryostat, a high vacuum (HV) chamber. Cryostat encloses the liquid helium cooled super-conducting magnets (TF and PF), which require the thermal radiation protection against room temperature. Liquid nitrogen (LN2) cooled panels are used to provide thermal shield around super-conducting magnets. During operation, LN2 panels will be under pressurized condition and its surrounding (cryostat) will be at high vacuum. Hence, LN2 panels must have very low leak rate. This paper describes an experiment to study the behaviour of the leaks in LN2 panels during sniffer test and pressure drop test using helium gas.

Genotype Imputation for Latinos Using the HapMap and 1000 Genomes Project Reference Panels.

PubMed

Gao, Xiaoyi; Haritunians, Talin; Marjoram, Paul; McKean-Cowdin, Roberta; Torres, Mina; Taylor, Kent D; Rotter, Jerome I; Gauderman, William J; Varma, Rohit

2012-01-01

Genotype imputation is a vital tool in genome-wide association studies (GWAS) and meta-analyses of multiple GWAS results. Imputation enables researchers to increase genomic coverage and to pool data generated using different genotyping platforms. HapMap samples are often employed as the reference panel. More recently, the 1000 Genomes Project resource is becoming the primary source for reference panels. Multiple GWAS and meta-analyses are targeting Latinos, the most populous, and fastest growing minority group in the US. However, genotype imputation resources for Latinos are rather limited compared to individuals of European ancestry at present, largely because of the lack of good reference data. One choice of reference panel for Latinos is one derived from the population of Mexican individuals in Los Angeles contained in the HapMap Phase 3 project and the 1000 Genomes Project. However, a detailed evaluation of the quality of the imputed genotypes derived from the public reference panels has not yet been reported. Using simulation studies, the Illumina OmniExpress GWAS data from the Los Angles Latino Eye Study and the MACH software package, we evaluated the accuracy of genotype imputation in Latinos. Our results show that the 1000 Genomes Project AMR + CEU + YRI reference panel provides the highest imputation accuracy for Latinos, and that also including Asian samples in the panel can reduce imputation accuracy. We also provide the imputation accuracy for each autosomal chromosome using the 1000 Genomes Project panel for Latinos. Our results serve as a guide to future imputation based analysis in Latinos.

Information and communication technology

NASA Technical Reports Server (NTRS)

Edelson, Burton I.; Pelton, Joseph N.; Bostian, Charles W.; Brandon, William T.; Chan, Vincent W. S.; Hager, E. Paul; Helm, Neil R.; Jennings, Raymond D.; Kwan, Robert K.; Mahle, Christoph E.

1994-01-01

NASA and the National Science Foundation (NSF) commissioned a panel of U.S. experts to study the international status of satellite communications systems and technology. The study covers emerging systems concepts, applications, services, and the attendant technologies. The panel members traveled to Europe, Japan, and Russia to gather information firsthand. They visited 17 sites in Europe, 20 in Japan, and 4 in Russia. These included major manufacturers, government organizations, service providers, and associated research and development facilities. The panel's report was reviewed by the sites visited, by the panel, and by representatives of U.S. industry. The report details the information collected and compares it to U.S. activities.

Satellite communications systems and technology. Executive Summary

NASA Technical Reports Server (NTRS)

Edelson, Burton I.; Pelton, Joseph N.; Bostian, Charles W.; Brandon, William T.; Chan, Vincent W. S.; Hager, E. Paul; Helm, Neil R.; Jennings, Raymond D.; Kwan, Robert; Mahle, Christoph E.

1993-01-01

NASA and the National Science Foundation (NSF) commissioned a panel of US experts to study the international status of satellite communications systems and technology. The study covers emerging systems concepts, applications, services, and the attendant technologies. The panel members travelled to Europe, Japan, and Russia to gather information first-hand. They visited 17 sites in Europe, 20 sites in Japan, and four in Russia. These included major manufacturers, government organizations, service providers, and associated R&D facilities. The panel's report was reviewed by the sites visited, by the panel, and by representatives of US industry. The report details the information collected and compares it to US activities.

Corrosion protection of aluminum alloys in contact with other metals

NASA Technical Reports Server (NTRS)

Kuster, C. A.

1969-01-01

Study establishes the quality of chemical and galvanized protection afforded by anodized and aldozided coatings applied to test panels of various aluminum alloys. The test panels, placed in firm contact with panels of titanium alloys, were subjected to salt spray tests and visually examined for corrosion effect.

Laboratory study of PCB transport from primary sources to settled dust

EPA Science Inventory

Transport of house dust and Arizona Test Dust on polychlorinated biphenyl (PCB)-containing panels and PCB-free panels was investigated in a 30-m3 stainless steel chamber. The PCB-containing panels were aluminum sheets coated with a PCB-spiked, oil-based primer or two-part polysul...

Noise transmission by viscoelastic sandwich panels

NASA Technical Reports Server (NTRS)

Vaicaitis, R.

1977-01-01

An analytical study on low frequency noise transmission into rectangular enclosures by viscoelastic sandwich panels is presented. Soft compressible cores with dilatational modes and hard incompressible cores with dilatational modes neglected are considered as limiting cases of core stiffness. It is reported that these panels can effect significant noise reduction.

Effect of Carbon Nanotubes Upon Emissions From Cutting and Sanding Carbon Fiber-Epoxy Composites

PubMed Central

Heitbrink, William A.; Lo, Li-Ming

2015-01-01

Carbon nanotubes (CNTs) are being incorporated into structural composites to enhance material strength. During fabrication or repair activities, machining nanocomposites may release CNTs into the workplace air. An experimental study was conducted to evaluate the emissions generated by cutting and sanding on three types of epoxy-composite panels: Panel A containing graphite fibers, Panel B containing graphite fibers and carbon-based mat, and Panel C containing graphite fibers, carbon-based mat, and multi-walled CNTs. Aerosol sampling was conducted with direct-reading instruments, and filter samples were collected for measuring elemental carbon (EC) and fiber concentrations. Our study results showed that cutting Panel C with a band saw did not generate detectable emissions of fibers inspected by transmission electron microscopy but did increase the particle mass, number, and EC emission concentrations by 20% to 80% compared to Panels A and B. Sanding operation performed on two Panel C resulted in fiber emission rates of 1.9×108 and 2.8×106 fibers per second (f/s), while no free aerosol fibers were detected from sanding Panels A and B containing no CNTs. These free CNT fibers may be a health concern. However, the analysis of particle and EC concentrations from these same samples cannot clearly indicate the presence of CNTs, because extraneous aerosol generation from machining the composite epoxy material increased the mass concentrations of the EC. PMID:26478716

Prediction and Measurement of the Vibration and Acoustic Radiation of Panels Subjected to Acoustic Loading

NASA Technical Reports Server (NTRS)

Turner, Travis L.; Rizzi, Stephen A.

1995-01-01

Interior noise and sonic fatigue are important issues in the development and design of advanced subsonic and supersonic aircraft. Conventional aircraft typically employ passive treatments, such as constrained layer damping and acoustic absorption materials, to reduce the structural response and resulting acoustic levels in the aircraft interior. These techniques require significant addition of mass and only attenuate relatively high frequency noise transmitted through the fuselage. Although structural acoustic coupling is in general very important in the study of aircraft fuselage interior noise, analysis of noise transmission through a panel supported in an infinite rigid baffle (separating two semi-infinite acoustic domains) can be useful in evaluating the effects of active/adaptive materials, complex loading, etc. Recent work has been aimed at developing adaptive and/or active methods of controlling the structural acoustic response of panels to reduce the transmitted noise1. A finite element formulation was recently developed to study the dynamic response of shape memory alloy (SMA) hybrid composite panels (conventional composite panel with embedded SMA fibers) subject to combined acoustic and thermal loads2. Further analysis has been performed to predict the far-field acoustic radiation using the finite element dynamic panel response prediction3. The purpose of the present work is to validate the panel vibration and acoustic radiation prediction methods with baseline experimental results obtained from an isotropic panel, without the effect of SMA.

Effect of Boundary Conditions on the Back Face Deformations of Flat UHMWPE Panels

DTIC Science & Technology

2014-12-01

Zhang [2] carried out a numerical study of the effects of clamping type and clamping pressure on the ballistic performance of woven Kevlar , and found...effects of composite size were also studied. Singletary [5] studied the effects of boundary conditions and panel sizes on V50 for Kevlar KM2 fabric. The...on the BFD in flat UHMWPE panels. UHMWPE possesses high tenacity and high strength compared to Kevlar , as a result of which it is the material of

Does endorsement of physical discipline matter? Assessing moderating influences on the maternal and child psychological correlates of physical discipline in African American families.

PubMed

McLoyd, Vonnie C; Kaplan, Rachel; Hardaway, Cecily R; Wood, Dana

2007-06-01

Using longitudinal data from a subsample of 890 African American families in the Child Development Supplement of the Panel Study of Income Dynamics, this study examined whether maternal endorsement of physical discipline moderates the link between (a) maternal psychological distress and spanking frequency and (b) spanking frequency and child depressive symptoms. As predicted, physical discipline administered by nonendorsing mothers was more strongly linked to maternal psychological distress than physical discipline administered by endorsing mothers. Also in keeping with the authors' hypothesis, the relation between spanking frequency and child-reported depressive symptoms was stronger for children of nonendorsing mothers than for children of endorsing mothers. In particular, the positive relation between physical discipline and children's depressive symptoms was significant only for children of nonendorsing mothers. These findings suggest that within-group variation in African American mothers' attitudes about physical discipline partially regulates the conditions under which these mothers use physical discipline and the probability that physical discipline contributes to depressive symptoms in children. Conclusions and implications for future research are discussed.

Hypervelocity impact effects on solar cells

NASA Technical Reports Server (NTRS)

Rose, M. Frank

1993-01-01

One of the space hazards of concern is the problem of natural matter and space debris impacting spacecraft. This phenomena has been studied since the early sixties and a methodology has been established to determine the relative abundance of meteoroids as a function of mass. As the mass decreases, the probability of suffering collisions increases, resulting in a constant bombardment from particles in the sub-micron range. The composition of this 'cosmic dust' is primarily Fe, Ni, Al, Mg, Na, Ca, Cr, H, O, and Mn. In addition to mechanical damage, impact velocities greater than 5 k m/sec can produce shock induced ionization effects with resultant surface charging and complex chemical interactions. The upper limit of the velocity distribution for these particles is on the order of 70 km/sec. The purpose of this work was to subject samples from solar power arrays to debris flux typical of what would be encountered in space, and measure the degradation of the panels after impact.

Pilot study of high-performance air filtration for classroom applications.

PubMed

Polidori, A; Fine, P M; White, V; Kwon, P S

2013-06-01

A study was conducted to investigate the effectiveness of three air purification systems in reducing the exposure of children to air contaminants inside nine classrooms of three Southern California schools. Continuous and integrated measurements were conducted to monitor the indoor and outdoor concentrations of ultrafine particles (UFPs), fine and coarse particulate matter (PM2.5 and PM10 , respectively), black carbon (BC), and volatile organic compounds. An heating, ventilating, and air conditioning (HVAC)-based high-performance panel filter (HP-PF), a register-based air purifier (RS), and a stand-alone air cleaning system (SA) were tested alone and in different combinations for their ability to remove the monitored pollutants. The combination of a RS and a HP-PF was the most effective solution for lowering the indoor concentrations of BC, UFPs, and PM2.5 , with study average reductions between 87% and 96%. When using the HP-PF alone, reductions close to 90% were also achieved. In all cases, air quality conditions were improved substantially with respect to the corresponding baseline (preexisting) conditions. Data on the performance of the gas-absorbing media included in the RS and SA unit were inconclusive, and their effectiveness, lifetime, costs, and benefits must be further assessed before conclusions and recommendations can be made. The installation of effective air filtration devices in classrooms may be an important mitigation measure to help reduce the exposure of school children to indoor pollutants of outdoor origin including ultrafine particles and diesel particulate matter, especially at schools located near highly trafficked freeways, refineries, and other important sources of air toxics. Published 2012. This article is a US Government work and is in the public domain in the USA.

Sound-proof Sandwich Panel Design via Metamaterial Concept

NASA Astrophysics Data System (ADS)

Sui, Ni

Sandwich panels consisting of hollow core cells and two face-sheets bonded on both sides have been widely used as lightweight and strong structures in practical engineering applications, but with poor acoustic performance especially at low frequency regime. Basic sound-proof methods for the sandwich panel design are spontaneously categorized as sound insulation and sound absorption. Motivated by metamaterial concept, this dissertation presents two sandwich panel designs without sacrificing weight or size penalty: A lightweight yet sound-proof honeycomb acoustic metamateiral can be used as core material for honeycomb sandwich panels to block sound and break the mass law to realize minimum sound transmission; the other sandwich panel design is based on coupled Helmholtz resonators and can achieve perfect sound absorption without sound reflection. Based on the honeycomb sandwich panel, the mechanical properties of the honeycomb core structure were studied first. By incorporating a thin membrane on top of each honeycomb core, the traditional honeycomb core turns into honeycomb acoustic metamaterial. The basic theory for such kind of membrane-type acoustic metamaterial is demonstrated by a lumped model with infinite periodic oscillator system, and the negative dynamic effective mass density for clamped membrane is analyzed under the membrane resonance condition. Evanescent wave mode caused by negative dynamic effective mass density and impedance methods are utilized to interpret the physical phenomenon of honeycomb acoustic metamaterials at resonance. The honeycomb metamaterials can extraordinarily improve low-frequency sound transmission loss below the first resonant frequency of the membrane. The property of the membrane, the tension of the membrane and the numbers of attached membranes can impact the sound transmission loss, which are observed by numerical simulations and validated by experiments. The sandwich panel which incorporates the honeycomb metamateiral as the core material maintains the mechanical property and yields a sound transmission loss that is consistently greater than 50 dB at low frequencies. Furthermore, the absorption property of the proposed honeycomb sandwich panel was experimentally studied. The honeycomb sandwich panel shows an excellent sound absorbing performance at high frequencies by using reinforced glass fiber without adding too much mass. The effect of the panel size and the stiffness of the grid-like frame effect of the honeycomb sandwich structures on sound transmission are discussed lastly. For the second sound-proof sandwich panel design, each unit cell of the sandwich panel is replaced by a Helmholtz resonator by perforating a small hole on the top face sheet. A perfect sound absorber sandwich panel with coupled Helmholtz resonators is proposed by two types: single identical Helmholtz resonator in each unit cell and dual Helmholtz resonators with different orifices, arranged in each cell arranged periodically. The soundproof sandwich panel is modelled as a panel embedded in rigid panel and assumed as a semiinfinite space with hard boundary condition. The net/mutual impedance model is first proposed and derived by solving Kirchhoff-Helmholtz integral by using the Green's function. The thermal-viscous energy dissipation at the thermal boundary layer dominates the total energy consumed. Two types of perfect sound absorber sandwich panel are designed in the last part. Two theoretical methods: the average energy and the equivalent surface impedance method are used to predict sound absorption performance. The geometry for perfect sound absorber sandwich panel at a target frequency can be obtained when the all the Helmholtz resonators are at resonance and the surface impedance of the sandwich panel matches the air impedance. The bandwidth for the identical sandwich panel mainly depends on the neck radius. The absorptive property of the dual Helmholtz resonators type of sandwich panel is studied by investigating the coupling effects between HRs. The theoretical results can be verified by numerical simulations through finite element method. The absorption bandwidth can be tuned by incorporating more HRs in each unit cell. Both sound-proof sandwich panel designs possess extraordinary acoustic performance for noise reduction at low frequency range with sub-wavelength structures. The sound absorber panel design can also achieve broadband sound attenuation at low frequencies.

Acute effects of air pollutants on pulmonary function among students: a panel study in an isolated island.

PubMed

Yoda, Yoshiko; Takagi, Hiroshi; Wakamatsu, Junko; Ito, Takeshi; Nakatsubo, Ryouhei; Horie, Yosuke; Hiraki, Takatoshi; Shima, Masayuki

2017-04-04

Many epidemiological studies on the health effects of air pollutants have been carried out in regions with major sources such as factories and automobiles. However, the health effects of air pollutants in regions without major sources remain unclear. This study investigated the acute effects of ambient air pollution on pulmonary function among healthy students in an isolated island without major artificial sources of air pollutants. A panel study was conducted of 43 healthy subjects who attended a school in an isolated island in the Seto Inland Sea, Japan. We measured the forced expiratory volume in 1 s (FEV 1 ) and peak expiratory flow (PEF) every morning for about 1 month in May 2014. Ambient concentrations of particulate matter ≤ 2.5 μm in diameter (PM 2.5 ), particulate matter between 2.5 and 10 μm in diameter (PM 10-2.5 ), black carbon (BC), ozone (O 3 ), and nitrogen dioxide (NO 2 ) were measured. The associations between the concentrations of air pollutants and pulmonary function were analyzed using mixed-effects models. A decrease in FEV 1 was significantly associated with BC concentrations (-27.28 mL [95%confidence interval (CI):-54.10,-0.46] for an interquartile range (IQR) increase of 0.23 μg/m 3 ). The decrease in PEF was significantly associated with indoor O 3 concentrations (-8.03 L/min [95% CI:-13.02,-3.03] for an IQR increase of 11 ppb). Among subjects with a history of allergy, an increase in PM 2.5 concentrations was significantly associated with low FEV 1 . In subjects with a history of asthma, an inverse association between the indoor O 3 concentration and pulmonary function was observed. Our results demonstrate that increases in BC and O 3 concentrations have acute effects on the pulmonary function among students in an isolated island without major artificial sources of air pollutants.

Changes in Body Weight and Psychotropic Drugs: A Systematic Synthesis of the Literature

PubMed Central

Dent, Robert; Blackmore, Angelique; Peterson, Joan; Habib, Rami; Kay, Gary Peter; Gervais, Alan; Taylor, Valerie; Wells, George

2012-01-01

Introduction Psychotropic medication use is associated with weight gain. While there are studies and reviews comparing weight gain for psychotropics within some classes, clinicians frequently use drugs from different classes to treat psychiatric disorders. Objective To undertake a systematic review of all classes of psychotropics to provide an all encompassing evidence-based tool that would allow clinicians to determine the risks of weight gain in making both intra-class and interclass choices of psychotropics. Methodology and Results We developed a novel hierarchical search strategy that made use of systematic reviews that were already available. When such evidence was not available we went on to evaluate randomly controlled trials, followed by cohort and other clinical trials, narrative reviews, and, where necessary, clinical opinion and anecdotal evidence. The data from the publication with the highest level of evidence based on our hierarchical classification was presented. Recommendations from an expert panel supplemented the evidence used to rank these drugs within their respective classes. Approximately 9500 articles were identified in our literature search of which 666 citations were retrieved. We were able to rank most of the psychotropics based on the available evidence and recommendations from subject matter experts. There were few discrepancies between published evidence and the expert panel in ranking these drugs. Conclusion Potential for weight gain is an important consideration in choice of any psychotropic. This tool will help clinicians select psychotropics on a case-by-case basis in order to minimize the impact of weight gain when making both intra-class and interclass choices. PMID:22719834

Temperature, traffic-related air pollution, and heart rate variability in a panel of healthy adults.

PubMed

Wu, Shaowei; Deng, Furong; Liu, Youcheng; Shima, Masayuki; Niu, Jie; Huang, Qinsheng; Guo, Xinbiao

2013-01-01

Both ambient temperature and air pollution have been associated with alterations in cardiac autonomic function, but the responsive patterns associated with temperature exposure and the interactive effects of temperature and air pollution remain largely unclear. We investigated the associations between personal temperature exposure and cardiac autonomic function as reflected by heart rate variability (HRV) in a panel of 14 healthy taxi drivers in the context of traffic-related air pollution. We collected real-time data on study subjects' in-car exposures to temperature and traffic-related air pollutants including particulate matter with an aerodynamic diameter ≤2.5 μm (PM(2.5)) and carbon monoxide (CO) and HRV indices during work time (8:30-21:00) on 48 sampling days in the warm season (May-September) and cold season (October-March). We applied mixed-effects models and loess models adjusting for potential confounders to examine the associations between temperature and HRV indices. We found nonlinear relationships between temperature and HRV indices in both the warm and cold seasons. Linear regression stratified by temperature levels showed that increasing temperature levels were associated with declines in standard deviation of normal-to-normal intervals over different temperature strata and increases in low-frequency power and low-frequency:high-frequency ratio in higher temperature range (>25 °C). PM(2.5) and CO modified these associations to various extents. Temperature was associated with alterations in cardiac autonomic function in healthy adults in the context of traffic-related air pollution. Copyright © 2012 Elsevier Inc. All rights reserved.

Task force on management and prevention of Acinetobacter baumannii infections in the ICU.

PubMed

Garnacho-Montero, José; Dimopoulos, George; Poulakou, Garyphallia; Akova, Murat; Cisneros, José Miguel; De Waele, Jan; Petrosillo, Nicola; Seifert, Harald; Timsit, Jean François; Vila, Jordi; Zahar, Jean-Ralph; Bassetti, Matteo

2015-12-01

Acinetobacter baumannii constitutes a dreadful problem in many ICUs worldwide. The very limited therapeutic options available for these organisms are a matter of great concern. No specific guidelines exist addressing the prevention and management of A. baumannii infections in the critical care setting. Clinical microbiologists, infectious disease specialists and intensive care physicians were invited by the Chair of the Infection Section of the ESICM to participate in a multidisciplinary expert panel. After the selection of clinically relevant questions, this document provides recommendations about the use of microbiological techniques for identification of A. baumannii in clinical laboratories, antibiotic therapy for severe infections and recommendations to control this pathogen in outbreaks and endemic situations. Evidence supporting each statement was graded according to the European Society of Clinical Microbiology and Infection Diseases (ESCMID) grading system. Empirical coverage of A. baumannii is recommended in severe infections (severe sepsis or septic shock) occurring during an A. baumannii outbreak, in an endemic setting, or in a previously colonized patient. For these cases, a polymyxin is suggested as part of the empirical treatment in cases of a high suspicion of a carbapenem-resistant (CR) A. baumannii strain. An institutional program including staff education, promotion of hand hygiene, strict contact and isolation precautions, environmental cleaning, targeted active surveillance, and antimicrobial stewardship should be instituted and maintained to combat outbreaks and endemic situations. Specific recommendations about prevention and management of A. baumannii infections in the ICU were elaborated by this multidisciplinary panel. The paucity of randomized controlled trials is noteworthy, so these recommendations are mainly based on observational studies and pharmacodynamics modeling.

Temperature and initial curvature effects in low-density panel flutter

NASA Technical Reports Server (NTRS)

Resende, Hugo B.

1992-01-01

The panel flutter phenomenon is studied assuming free-molecule flow. This kind of analysis is relevant in the case of hypersonic flight vehicles traveling at high altitudes, especially in the leeward portion of the vehicle. In these conditions the aerodynamic shear can be expected to be considerably larger than the pressure at a given point, so that the effects of such a loading are incorporated into the structural model. Both the pressure and shear loadings are functions of the panel temperature, which can lead to great variations on the location of the stability boundaries for parametric studies. Different locations can, however, be 'collapsed' onto one another by using as ordinate an appropriately normalized dynamic pressure parameter. This procedure works better for higher values of the panel temperature for a fixed undisturbed flow temperature. Finally, the behavior of the system is studied when the panel has some initial curvature. This leads to the conclusion that it may be unrealistic to try to distinguish between a parabolic or sinusoidal initial shape.

Effects of eccentricities and lateral pressure on the design of stiffened compression panels

NASA Technical Reports Server (NTRS)

Giles, G. L.; Anderson, M. S.

1972-01-01

An analysis for determining the effects of eccentricities and lateral pressure on the design of stiffened compression panels is presented. The four types of panel stiffeners considered are integral, zee, integral zee, and integral tee. Mass-strength curves, which give the mass of the panel necessary to carry a specified load, are given along with related design equations needed to calculate the cross-sectional dimensions of the minimum-mass-stiffened panel. The results of the study indicate that the proportions of the panels are geometrically similar to the proportions of panels designed for no eccentricity or lateral pressure, but no cross-sectional dimensions are greater, resulting in significantly increased mass. The analytical minimum-mass designs of zee-stiffened panels are compared with designs from experimentally derived charts. An assumed eccentricity of 0.001 times the length of the panel is used to correlate the analytical and experimental data. Good correlation between the experimentally derived and the analytical curves is obtained for the range of loading where materials yield governs the design. At lower loads the mass given by the analytical curve using this assumed eccentricity is greater than that given by the experimental results.

Nonlinear flutter analysis of composite panels

NASA Astrophysics Data System (ADS)

An, Xiaomin; Wang, Yan

2018-05-01

Nonlinear panel flutter is an interesting subject of fluid-structure interaction. In this paper, nonlinear flutter characteristics of curved composite panels are studied in very low supersonic flow. The composite panel with geometric nonlinearity is modeled by a nonlinear finite element method; and the responses are computed by the nonlinear Newmark algorithm. An unsteady aerodynamic solver, which contains a flux splitting scheme and dual time marching technology, is employed in calculating the unsteady pressure of the motion of the panel. Based on a half-step staggered coupled solution, the aeroelastic responses of two composite panels with different radius of R = 5 and R = 2.5 are computed and compared with each other at different dynamic pressure for Ma = 1.05. The nonlinear flutter characteristics comprising limited cycle oscillations and chaos are analyzed and discussed.

Structural Stability of a Stiffened Aluminum Fuselage Panel Subjected to Combined Mechanical and Internal Pressure Loads

NASA Technical Reports Server (NTRS)

Rouse, Marshall; Young, Richard D.; Gehrki, Ralph R.

2003-01-01

Results from an experimental and analytical study of a curved stiffened aluminum panel subjected to combined mechanical and internal pressure loads are presented. The panel loading conditions were simulated using a D-box test fixture. Analytical buckling load results calculated from a finite element analysis are presented and compared to experimental results. Buckling results presented indicate that the buckling load of the fuselage panel is significantly influenced by internal pressure loading. The experimental results suggest that the stress distribution is uniform in the panel prior to buckling. Nonlinear finite element analysis results correlates well with experimental results up to buckling.

Development of aircraft lavatory compartments with improved fire resistance characteristics. Phase 2: Sandwich panel resin system development

NASA Technical Reports Server (NTRS)

Anderson, R. A.; Arnold, D. B.; Johnson, G. A.

1979-01-01

A NASA-funded program is described which aims to develop a resin system for use in the construction of lavatory wall panels, sidewall panels, and ceiling panels possessing flammability, smoke and gas emission, and toxicity (FS&T) characteristics superior to the existing epoxy resin. Candidate resins studied were phenolic, polyimide, and bismaleimide. Based on the results of a series of FS&T as well as mechanical and aesthetic property tests, a phenolic resin was chosen as the superior material. Material and process specifications covering the phenolic resin based materials were prepared and a method of rating sandwich panel performance was developed.

Design, testing, and damage tolerance study of bonded stiffened composite wing cover panels

NASA Technical Reports Server (NTRS)

Madan, Ram C.; Sutton, Jason O.

1988-01-01

Results are presented from the application of damage tolerance criteria for composite panels to multistringer composite wing cover panels developed under NASA's Composite Transport Wing Technology Development contract. This conceptual wing design integrated aeroelastic stiffness constraints with an enhanced damage tolerance material system, in order to yield optimized producibility and structural performance. Damage tolerance was demonstrated in a test program using full-sized cover panel subcomponents; panel skins were impacted at midbay between stiffeners, directly over a stiffener, and over the stiffener flange edge. None of the impacts produced visible damage. NASTRAN analyses were performed to simulate NDI-detected invisible damage.

Study of double wall panels for use in propeller driven aircraft

NASA Technical Reports Server (NTRS)

Atwal, M.; Bernhard, R.

1984-01-01

Propeller driven aircraft have exhibited high levels of interior noise. Most absorption materials are not effective at low frequencies where maximum noise levels occur. Two panels separated by an air gap are suggested as an alternative means of noise attenuation. This design produces an impedance mismatch where a sound wave travels backwards to the source. The higher the impedance, the higher the reflected soundwave intensity. Two aluminum panels with helium in between and two panels with one being perforated were investigated. Helium increases the transmission loss because of a greater impedance mismatch than air. The transmission loss of the unperforated panel is higher throughout the frequency range tested.

Study of double wall panels for use in propeller driven aircraft

NASA Astrophysics Data System (ADS)

Atwal, M.; Bernhard, R.

1984-05-01

Propeller driven aircraft have exhibited high levels of interior noise. Most absorption materials are not effective at low frequencies where maximum noise levels occur. Two panels separated by an air gap are suggested as an alternative means of noise attenuation. This design produces an impedance mismatch where a sound wave travels backwards to the source. The higher the impedance, the higher the reflected soundwave intensity. Two aluminum panels with helium in between and two panels with one being perforated were investigated. Helium increases the transmission loss because of a greater impedance mismatch than air. The transmission loss of the unperforated panel is higher throughout the frequency range tested.

Sound transmission analysis of partially treated MR fluid-based sandwich panels using finite element method

NASA Astrophysics Data System (ADS)

Hemmatian, M.; Sedaghati, R.

2017-04-01

This study aims at developing a finite element model to predict the sound transmission loss (STL) of a multilayer panel partially treated with a Magnetorheological (MR) fluid core layer. MR fluids are smart materials with promising controllable rheological characteristics in which the application of an external magnetic field instantly changes their rheological properties. Partial treatment of sandwich panels with MR fluid core layer provides an opportunity to change stiffness and damping of the structure without significantly increasing the mass. The STL of a finite sandwich panel partially treated with MR fluid is modeled using the finite element (FE) method. Circular sandwich panels with clamped boundary condition and elastic face sheets in which the core layer is segmented circumferentially is considered. The MR fluid core layer is considered as a viscoelastic material with complex shear modulus with the magnetic field and frequency dependent storage and loss moduli. Neglecting the effect of the panel's vibration on the pressure forcing function, the work done by the acoustic pressure is expressed as a function of the blocked pressure in order to calculate the force vector in the equation of the motion of the panel. The governing finite element equation of motion of the MR sandwich panel is then developed to predict the transverse vibration of the panel which can then be utilized to obtain the radiated sound using Green's function. The developed model is used to conduct a systematic parametric study on the effect of different locations of MR fluid treatment on the natural frequencies and the STL.

Variable-intercept panel model for deformation zoning of a super-high arch dam.

PubMed

Shi, Zhongwen; Gu, Chongshi; Qin, Dong

2016-01-01

This study determines dam deformation similarity indexes based on an analysis of deformation zoning features and panel data clustering theory, with comprehensive consideration to the actual deformation law of super-high arch dams and the spatial-temporal features of dam deformation. Measurement methods of these indexes are studied. Based on the established deformation similarity criteria, the principle used to determine the number of dam deformation zones is constructed through entropy weight method. This study proposes the deformation zoning method for super-high arch dams and the implementation steps, analyzes the effect of special influencing factors of different dam zones on the deformation, introduces dummy variables that represent the special effect of dam deformation, and establishes a variable-intercept panel model for deformation zoning of super-high arch dams. Based on different patterns of the special effect in the variable-intercept panel model, two panel analysis models were established to monitor fixed and random effects of dam deformation. Hausman test method of model selection and model effectiveness assessment method are discussed. Finally, the effectiveness of established models is verified through a case study.

Sound transmission loss of composite sandwich panels

NASA Astrophysics Data System (ADS)

Zhou, Ran

Light composite sandwich panels are increasingly used in automobiles, ships and aircraft, because of the advantages they offer of high strength-to-weight ratios. However, the acoustical properties of these light and stiff structures can be less desirable than those of equivalent metal panels. These undesirable properties can lead to high interior noise levels. A number of researchers have studied the acoustical properties of honeycomb and foam sandwich panels. Not much work, however, has been carried out on foam-filled honeycomb sandwich panels. In this dissertation, governing equations for the forced vibration of asymmetric sandwich panels are developed. An analytical expression for modal densities of symmetric sandwich panels is derived from a sixth-order governing equation. A boundary element analysis model for the sound transmission loss of symmetric sandwich panels is proposed. Measurements of the modal density, total loss factor, radiation loss factor, and sound transmission loss of foam-filled honeycomb sandwich panels with different configurations and thicknesses are presented. Comparisons between the predicted sound transmission loss values obtained from wave impedance analysis, statistical energy analysis, boundary element analysis, and experimental values are presented. The wave impedance analysis model provides accurate predictions of sound transmission loss for the thin foam-filled honeycomb sandwich panels at frequencies above their first resonance frequencies. The predictions from the statistical energy analysis model are in better agreement with the experimental transmission loss values of the sandwich panels when the measured radiation loss factor values near coincidence are used instead of the theoretical values for single-layer panels. The proposed boundary element analysis model provides more accurate predictions of sound transmission loss for the thick foam-filled honeycomb sandwich panels than either the wave impedance analysis model or the statistical energy analysis model.

Fatigue flaw growth behavior in stiffened and unstiffened panels loaded in biaxial tension

NASA Technical Reports Server (NTRS)

Beck, E. J.

1973-01-01

The effect was investigated of biaxial loading on the flaw growth rate of 2219-T87 aluminum alloy that would be typical of Space Shuttle cryogenic tankage design. The stress distribution and stress concentration factors for several integrally stiffened panels under various loading conditions were obtained. The flaw growth behavior of both stiffened and unstiffened panels under biaxial loading conditions was determined. The effect of a complex stress state was studied by introducing flaws in fillet areas of biaxially loaded stiffened panels.

Slewing control experiment for a flexible panel

NASA Technical Reports Server (NTRS)

Juang, Jer-Nan

1987-01-01

Technology areas are identified in which better analytical and/or experimental methods are needed to adequately and accurately control the dynamic responses of multibody space platforms such as the space station. A generic space station solar panel is used to experimentally evaluate current control technologies. Active suppression of solar panel vibrations induced by large angle maneuvers is studied with a torque actuator at the root of the solar panel. These active suppression tests will identify the hardware requirements and adequacy of various controller designs.

Comparative analysis of heat dissipation panels for a hybrid cooling system integrated in buildings

NASA Astrophysics Data System (ADS)

Zuazua-Ros, A.; Ramos, JC; Martín-Gómez, C.; Gómez-Acebo, Tomás; Pisano, A.

2018-05-01

The use of cooling panels as heat dissipation elements integrated in buildings has been previously investigated by the authors. Those elements would be connected to the condenser and would dissipate the heat in a passive form. Following the research, this study analyses and compares the thermal performance of two heat dissipation panels as part of a hybrid cooling system. Both panels were experimentally tested under different variables, thus having nine scenarios for each panel. Additionally, an already validated model was applied. The empirical results show a considerable difference between the cooling capacity among them, doubling the daily average ratio in one scenario. The heat dissipation ratios vary between 106 and 227 W/m2 in the first case and 140 and 413 W/m2 in the second. Regarding the model applicability, the average error for each panel was 4.0% and 8.5%. The bond between the metal sheet and the pipes of the panels has proven to be the main parameter to assure the highest heat dissipation potential of each panel.

Low cost fabrication of ablative heat shields

NASA Technical Reports Server (NTRS)

Cecka, A. M.; Schofield, W. C.

1972-01-01

A material and process study was performed using subscale panels in an attempt to reduce the cost of fabricating ablative heat shield panels. Although no improvements were made in the material formulation, a significant improvement was obtained in the processing methods compared to those employed in the previous work. The principal feature of the new method is the press filling and curing of the ablation material in a single step with the bonding and curing of the face sheet. This method was chosen to replace the hand troweling and autoclave curing procedure used previously. Double-curvature panels of the same size as the flat panels were fabricated to investigate fabrication problems. It was determined that the same materials and processes used for flat panels can be used to produce the curved panels. A design with severe curvatures consisting of radii of 24 x 48 inches was employed for evaluation. Ten low-density and ten high-density panels were fabricated. With the exception of difficulties related to short run non-optimum tooling, excellent panel filling and density uniformity were obtained.

Optimal Design and Damage Tolerance Verification of an Isogrid Structure for Helicopter Application

NASA Technical Reports Server (NTRS)

Baker, Donald J.; Fudge, Jack; Ambur, Damodar R.; Kassapoglou, Christos

2003-01-01

A composite isogrid panel design for application to a rotorcraft fuselage is presented. An optimum panel design for the lower fuselage of the rotorcraft that is subjected to combined in-plane compression and shear loads was generated using a design tool that utilizes a smeared-stiffener theory in conjunction with a genetic algorithm. A design feature was introduced along the edges of the panel that facilitates introduction of loads into the isogrid panel without producing undesirable local bending gradients. A low-cost manufacturing method for the isogrid panel that incorporates these design details is also presented. Axial compression tests were conducted on the undamaged and low-speed impact damaged panels to demonstrate the damage tolerance of this isogrid panel. A combined loading test fixture was designed and utilized that allowed simultaneous application of compression and shear loads to the test specimen. Results from finite element analyses are presented for the isogrid panel designs and these results are compared with experimental results. This study illustrates the isogrid concept to be a viable candidate for application to the helicopter lower fuselage structure.

A study of the structural-acoustic response and interior noise levels of fuselage structures

NASA Technical Reports Server (NTRS)

Koval, L. R.

1978-01-01

Models of both flat and curved fuselage panels were tested for their sound transmission characteristics. The effect of external air flow on transmission loss was simulated in a subsonic wind-tunnel. By numerically evaluating the known equations for field-incidence transmission loss of single-walled panels in a computer program, a comparison of the theory with the test results was made. As a further extension to aircraft fuselage simulation, equations for the field-incidence transmission loss of a double-walled panel were derived. Flow is shown to provide a small increase in transmission loss for a flat panel. Curvature is shown to increase transmission loss for low frequencies, while also providing a sharp decrease in transmission loss at the ring frequency of the cylindrical panel. The field-incidence transmission loss of a double-walled panel was found to be approximately twice that for a single-walled panel, with the addition of dips in the transmission loss at the air gap resonances and at the critical frequency of the internal panel.

Space Shuttle Orbiter Wing-Leading-Edge Panel Thermo-Mechanical Analysis for Entry Conditions

NASA Technical Reports Server (NTRS)

Knight, Norman F., Jr.; Song, Kyongchan; Raju, Ivatury S.

2010-01-01

Linear elastic, thermo-mechanical stress analyses of the Space Shuttle Orbiter wing-leading-edge panels is presented for entry heating conditions. The wing-leading-edge panels are made from reinforced carbon-carbon and serve as a part of the overall thermal protection system. Three-dimensional finite element models are described for three configurations: integrated configuration, an independent single-panel configuration, and a local lower-apex joggle segment. Entry temperature conditions are imposed and the through-the-thickness response is examined. From the integrated model, it was concluded that individual panels can be analyzed independently since minimal interaction between adjacent components occurred. From the independent single-panel model, it was concluded that increased through-the-thickness stress levels developed all along the chord of a panel s slip-side joggle region, and hence isolated local joggle sections will exhibit the same trend. From the local joggle models, it was concluded that two-dimensional plane-strain models can be used to study the influence of subsurface defects along the slip-side joggle region of these panels.

Effect of bow-type initial imperfection on reliability of minimum-weight, stiffened structural panels

NASA Technical Reports Server (NTRS)

Stroud, W. Jefferson; Krishnamurthy, Thiagaraja; Sykes, Nancy P.; Elishakoff, Isaac

1993-01-01

Computations were performed to determine the effect of an overall bow-type imperfection on the reliability of structural panels under combined compression and shear loadings. A panel's reliability is the probability that it will perform the intended function - in this case, carry a given load without buckling or exceeding in-plane strain allowables. For a panel loaded in compression, a small initial bow can cause large bending stresses that reduce both the buckling load and the load at which strain allowables are exceeded; hence, the bow reduces the reliability of the panel. In this report, analytical studies on two stiffened panels quantified that effect. The bow is in the shape of a half-sine wave along the length of the panel. The size e of the bow at panel midlength is taken to be the single random variable. Several probability density distributions for e are examined to determine the sensitivity of the reliability to details of the bow statistics. In addition, the effects of quality control are explored with truncated distributions.

Improved imputation accuracy in Hispanic/Latino populations with larger and more diverse reference panels: applications in the Hispanic Community Health Study/Study of Latinos (HCHS/SOL)

PubMed Central

Nelson, Sarah C.; Stilp, Adrienne M.; Papanicolaou, George J.; Taylor, Kent D.; Rotter, Jerome I.; Thornton, Timothy A.; Laurie, Cathy C.

2016-01-01

Imputation is commonly used in genome-wide association studies to expand the set of genetic variants available for analysis. Larger and more diverse reference panels, such as the final Phase 3 of the 1000 Genomes Project, hold promise for improving imputation accuracy in genetically diverse populations such as Hispanics/Latinos in the USA. Here, we sought to empirically evaluate imputation accuracy when imputing to a 1000 Genomes Phase 3 versus a Phase 1 reference, using participants from the Hispanic Community Health Study/Study of Latinos. Our assessments included calculating the correlation between imputed and observed allelic dosage in a subset of samples genotyped on a supplemental array. We observed that the Phase 3 reference yielded higher accuracy at rare variants, but that the two reference panels were comparable at common variants. At a sample level, the Phase 3 reference improved imputation accuracy in Hispanic/Latino samples from the Caribbean more than for Mainland samples, which we attribute primarily to the additional reference panel samples available in Phase 3. We conclude that a 1000 Genomes Project Phase 3 reference panel can yield improved imputation accuracy compared with Phase 1, particularly for rare variants and for samples of certain genetic ancestry compositions. Our findings can inform imputation design for other genome-wide association studies of participants with diverse ancestries, especially as larger and more diverse reference panels continue to become available. PMID:27346520

High-accuracy optical extensometer based on coordinate transform in two-dimensional digital image correlation

NASA Astrophysics Data System (ADS)

Lv, Zeqian; Xu, Xiaohai; Yan, Tianhao; Cai, Yulong; Su, Yong; Zhang, Qingchuan

2018-01-01

In the measurement of plate specimens, traditional two-dimensional (2D) digital image correlation (DIC) is challenged by two aspects: (1) the slant optical axis (misalignment of the optical camera axis and the object surface) and (2) out-of-plane motions (including translations and rotations) of the specimens. There are measurement errors in the results measured by 2D DIC, especially when the out-of-plane motions are big enough. To solve this problem, a novel compensation method has been proposed to correct the unsatisfactory results. The proposed compensation method consists of three main parts: 1) a pre-calibration step is used to determine the intrinsic parameters and lens distortions; 2) a compensation panel (a rigid panel with several markers located at known positions) is mounted to the specimen to track the specimen's motion so that the relative coordinate transformation between the compensation panel and the 2D DIC setup can be calculated using the coordinate transform algorithm; 3) three-dimensional world coordinates of measuring points on the specimen can be reconstructed via the coordinate transform algorithm and used to calculate deformations. Simulations have been carried out to validate the proposed compensation method. Results come out that when the extensometer length is 400 pixels, the strain accuracy reaches 10 με no matter out-of-plane translations (less than 1/200 of the object distance) nor out-of-plane rotations (rotation angle less than 5°) occur. The proposed compensation method leads to good results even when the out-of-plane translation reaches several percents of the object distance or the out-of-plane rotation angle reaches tens of degrees. The proposed compensation method has been applied in tensile experiments to obtain high-accuracy results as well.

Sound absorption study on acoustic panel from kapok fiber and egg tray

NASA Astrophysics Data System (ADS)

Kaamin, Masiri; Mahir, Nurul Syazwani Mohd; Kadir, Aslila Abd; Hamid, Nor Baizura; Mokhtar, Mardiha; Ngadiman, Norhayati

2017-12-01

Noise also known as a sound, especially one that is loud or unpleasant or that causes disruption. The level of noise can be reduced by using sound absorption panel. Currently, the market produces sound absorption panel, which use synthetic fibers that can cause harmful effects to the health of consumers. An awareness of using natural fibers from natural materials gets attention of some parties to use it as a sound absorbing material. Therefore, this study was conducted to investigate the potential of sound absorption panel using egg trays and kapok fibers. The test involved in this study was impedance tube test which aims to get sound absorption coefficient (SAC). The results showed that there was good sound absorption at low frequency from 0 Hz up to 900 Hz where the maximum absorption coefficient was 0.950 while the maximum absorption at high frequencies was 0.799. Through the noise reduction coefficient (NRC), the material produced NRC of 0.57 indicates that the materials are very absorbing. In addition, the reverberation room test was carried out to get the value of reverberation time (RT) in unit seconds. Overall this panel showed good results at low frequencies between 0 Hz up to 1500 Hz. In that range of frequency, the maximum reverberation time for the panel was 3.784 seconds compared to the maximum reverberation time for an empty room was 5.798 seconds. This study indicated that kapok fiber and egg tray as the material of absorption panel has a potential as environmental and cheap products in absorbing sound at low frequency.

Genotoxicity Expert Panel review: weight of evidence evaluation of the genotoxicity of glyphosate, glyphosate-based formulations, and aminomethylphosphonic acid.

PubMed

Brusick, David; Aardema, Marilyn; Kier, Larry; Kirkland, David; Williams, Gary

2016-09-01

In 2015, the International Agency for Research on Cancer (IARC) published a monograph concluding there was strong evidence for genotoxicity of glyphosate and glyphosate formulations and moderate evidence for genotoxicity of the metabolite aminomethylphosphonic acid (AMPA). These conclusions contradicted earlier extensive reviews supporting the lack of genotoxicity of glyphosate and glyphosate formulations. The IARC Monograph concluded there was strong evidence of induction of oxidative stress by glyphosate, glyphosate formulations, and AMPA. The Expert Panel reviewed the genotoxicity and oxidative stress data considered in the IARC Monograph, together with other available data not considered by IARC. The Expert Panel defined and used a weight of evidence (WoE) approach that included ranking of studies and endpoints by the strength of their linkage to events associated with carcinogenic mechanisms. Importantly, the Expert Panel concluded that there was sufficient information available from a very large number of regulatory genotoxicity studies that should have been considered by IARC. The WoE approach, the inclusion of all relevant regulatory studies, and some differences in interpretation of individual studies led to significantly different conclusions by the Expert Panel compared with the IARC Monograph. The Expert Panel concluded that glyphosate, glyphosate formulations, and AMPA do not pose a genotoxic hazard and the data do not support the IARC Monograph genotoxicity evaluation. With respect to carcinogenicity classification and mechanism, the Expert Panel concluded that evidence relating to an oxidative stress mechanism of carcinogenicity was largely unconvincing and that the data profiles were not consistent with the characteristics of genotoxic carcinogens.

Hypersonic panel flutter in a rarefied atmosphere

NASA Technical Reports Server (NTRS)

Resende, Hugo B.

1993-01-01

Panel flutter is a form of dynamic aeroelastic instability resulting from the interaction between motion of an aircraft structural panel and the aerodynamic loads exerted on that panel by air flowing past one of the faces. It differs from lifting surface flutter in the sense that it is not usually catastrophic, the panel's motion being limited by nonlinear membrane stresses produced by the transverse displacement. Above some critical airflow condition, the linear instability grows to a limit cycle . The present investigation studies panel flutter in an aerodynamic regime known as 'free molecule flow', wherein intermolecular collisions can be neglected and loads are caused by interactions between individual molecules and the bounding surface. After collision with the panel, molecules may be reflected specularly or reemitted in diffuse fashion. Two parameters characterize this process: the 'momentum accommodation coefficient', which is the fraction of the specularly reflected molecules; and the ratio between the panel temperature and that of the free airstream. This model is relevant to the case of hypersonic flight vehicles traveling at very high altitudes and especially for panels oriented parallel to the airstream or in the vehicle's lee. Under these conditions the aerodynamic shear stress turns out to be considerably larger than the surface pressures, and shear effects must be included in the model. This is accomplished by means of distributed longitudinal and bending loads. The former can cause the panel to buckle. In the example of a simply-supported panel, it turns out that the second mode of free vibration tends to dominate the flutter solution, which is carried out by a Galerkin analysis. Several parametric studies are presented. They include the effects of (1) temperature ratio; (2) momentum accommodation coefficient; (3) spring parameters, which are associated with how the panel is connected to adjacent structures; (4) a parameter which relates compressive end load to its value which would cause classical column buckling; (5) a parameter proportional to the pressure differential between the front and back faces; and (6) initial curvature. The research is completed by an investigation into the possibility of accounting for molecular collisions, which proves to be infeasible given the speeds of current mainframe supercomputers.

Experimental vibroacoustic testing of plane panels using synthesized random pressure fields.

PubMed

Robin, Olivier; Berry, Alain; Moreau, Stéphane

2014-06-01

The experimental reproduction of random pressure fields on a plane panel and corresponding induced vibrations is studied. An open-loop reproduction strategy is proposed that uses the synthetic array concept, for which a small array element is moved to create a large array by post-processing. Three possible approaches are suggested to define the complex amplitudes to be imposed to the reproduction sources distributed on a virtual plane facing the panel to be tested. Using a single acoustic monopole, a scanning laser vibrometer and a baffled simply supported aluminum panel, experimental vibroacoustic indicators such as the Transmission Loss for Diffuse Acoustic Field, high-speed subsonic and supersonic Turbulent Boundary Layer excitations are obtained. Comparisons with simulation results obtained using a commercial software show that the Transmission Loss estimation is possible under both excitations. Moreover and as a complement to frequency domain indicators, the vibroacoustic behavior of the panel can be studied in the wave number domain.

75 FR 69685 - National Institute of Diabetes and Digestive and Kidney Diseases; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-15

... Diabetes and Digestive and Kidney Diseases; Notice of Closed Meetings Pursuant to section 10(d) of the... Diabetes and Digestive and Kidney Diseases Special Emphasis Panel; Special Emphasis Panel for R01... Diabetes and Digestive and Kidney Diseases Special Emphasis Panel; Liver Ancillary Studies. Date: December...

Environmental Performance of North American Wood Panel Manufacturing

Treesearch

R. Bergman; D. Kaestner; A. Taylor

2015-01-01

Manufacturing building products such as wood panels has environmental impacts, including contributions to climate change. This paper is a compilation of four studies quantifying these impacts using the life-cycle assessment (LCA) method on five wood-based panel products made in North America during 2012. LCA is an internationally accepted and standardized method for...

Mechanical and physical properties of agro-based fiberboard

Treesearch

S. Lee; T.F. Shupe; C.Y. Hse

2006-01-01

In order to better utilize agricultural fibers as an alternative resource for composite panels, several variables were investigated to improve mechanical and physical properties of agm-based fiberboard. This study focused on the effect of fiber morphology, slenderness ratios (UD), and fiber mixing combinations on panel properties. The panel construction types were also...

Development and validation of a low-density SNP panel related to prolificacy in sheep

USDA-ARS?s Scientific Manuscript database

High-density SNP panels (e.g., 50,000 and 600,000 markers) have been used in exploratory population genetic studies with commercial and minor breeds of sheep. However, routine genetic diversity evaluations of large numbers of samples with large panels are in general cost-prohibitive for gene banks. ...

Thermal Performance of Precast Concrete Sandwich Panel (PCSP) Design for Sustainable Built Environment

NASA Astrophysics Data System (ADS)

Ern, Peniel Ang Soon; Ling, Lim Mei; Kasim, Narimah; Hamid, Zuhairi Abd; Masrom, Md Asrul Nasid Bin

2017-10-01

Malaysia’s awareness of performance criteria in construction industry towards a sustainable built environment with the use of precast concrete sandwich panel (PCSP) system is applied in the building’s wall to study the structural behaviour. However, very limited studies are conducted on the thermal insulation of exterior and interior panels in PCSP design. In hot countries such as Malaysia, proper designs of panel are important to obtain better thermal insulation for building. This study is based on thermal performance of precast concrete sandwich panel design for sustainable built environment in Malaysia. In this research, three full specimens, which are control specimen (C), foamed concrete (FC) panels and concrete panels with added palm oil fuel ash (FC+ POFA), where FC and FC+POFA sandwiched with gypsum board (G) were produced to investigate their thermal performance. Temperature difference of exterior and interior surface of specimen was used as indicators of thermal-insulating performance of PCSP design. Heat transfer test by halogen lamp was carried out on three specimens where the exterior surface of specimens was exposed to the halogen lamp. The temperature reading of exterior and interior surface for three specimens were recorded with the help of thermocouple. Other factors also studied the workability, compressive strength and axial compressive strength of the specimens. This study has shown that FC + POFA specimen has the strength nearer to normal specimen (C + FC specimen). Meanwhile, the heat transfer results show that the FC+POFA has better thermal insulation performance compared to C and FC specimens with the highest temperature difference, 3.4°C compared to other specimens. The results from this research are useful to be implemented in construction due to its benefits such as reduction of energy consumption in air-conditioning, reduction of construction periods and eco-friendly materials.

Experimental and Theoretical Analysis of Sound Absorption Properties of Finely Perforated Wooden Panels.

PubMed

Song, Boqi; Peng, Limin; Fu, Feng; Liu, Meihong; Zhang, Houjiang

2016-11-22

Perforated wooden panels are typically utilized as a resonant sound absorbing material in indoor noise control. In this paper, the absorption properties of wooden panels perforated with tiny holes of 1-3 mm diameter were studied both experimentally and theoretically. The Maa-MPP (micro perforated panels) model and the Maa-Flex model were applied to predict the absorption regularities of finely perforated wooden panels. A relative impedance comparison and full-factorial experiments were carried out to verify the feasibility of the theoretical models. The results showed that the Maa-Flex model obtained good agreement with measured results. Control experiments and measurements of dynamic mechanical properties were carried out to investigate the influence of the wood characteristics. In this study, absorption properties were enhanced by sound-induced vibration. The relationship between the dynamic mechanical properties and the panel mass-spring vibration absorption was revealed. While the absorption effects of wood porous structure were not found, they were demonstrated theoretically by using acoustic wave propagation in a simplified circular pipe with a suddenly changed cross-section model. This work provides experimental and theoretical guidance for perforation parameter design.

Optimization of Blended Wing Body Composite Panels Using Both NASTRAN and Genetic Algorithm

NASA Technical Reports Server (NTRS)

Lovejoy, Andrew E.

2006-01-01

The blended wing body (BWB) is a concept that has been investigated for improving the performance of transport aircraft. A trade study was conducted by evaluating four regions from a BWB design characterized by three fuselage bays and a 400,000 lb. gross take-off weight (GTW). This report describes the structural optimization of these regions via computational analysis and compares them to the baseline designs of the same construction. The identified regions were simplified for use in the optimization. The regions were represented by flat panels having appropriate classical boundary conditions and uniform force resultants along the panel edges. Panel-edge tractions and internal pressure values applied during the study were those determined by nonlinear NASTRAN analyses. Only one load case was considered in the optimization analysis for each panel region. Optimization was accomplished using both NASTRAN solution 200 and Genetic Algorithm (GA), with constraints imposed on stress, buckling, and minimum thicknesses. The NASTRAN optimization analyses often resulted in infeasible solutions due to violation of the constraints, whereas the GA enforced satisfaction of the constraints and, therefore, always ensured a feasible solution. However, both optimization methods encountered difficulties when the number of design variables was increased. In general, the optimized panels weighed less than the comparable baseline panels.

Predicting the soiling of modern glass in urban environments: A new physically-based model

NASA Astrophysics Data System (ADS)

Alfaro, S. C.; Chabas, A.; Lombardo, T.; Verney-Carron, A.; Ausset, P.

2012-12-01

This study revisits the measurements of the MULTI-ASSESS and Long Term Soiling programs for understanding physically, and modeling, the processes controlling the soiling of modern glass in polluted conditions. The results show a strong correlation between the size distribution of particles and the evolution of the mass deposited at the surface of the glass. Over observation periods covering more than 2 years, the mass deposition on glass panels sheltered from the rain is observed to accelerate regularly with time at the sites closest to the sources of particulate matter (Roadside sites). At these sites the deposit is also richer in coarse (supermicron) mineral particles than at more distant (Urban Background and Suburban) sites, where the contribution of submicron particles (among which a significant fraction of particulate organic matter) is larger. This size and compositional segregation probably explains that the mass accumulation tends to slow down with time and finally saturate after an estimated duration of more than 10 years at the Suburban sites. The analysis of the correlation between the measured accumulated mass and haze shows that the haze-creating mass efficiency of the deposit decreases progressively as the density of particles increases on the glass panels. This is interpreted as being a consequence of the increasing influence of multiple scattering. A steady-state is eventually obtained when layers of closely packed particles are formed, which occurs for surface masses of the order of a few tens of μg cm-2. After this stage is reached, the haze increases linearly with further mass deposition at a pace conditioned by the size-distribution of the deposit. The parameterization of the evolution of the deposited mass with time, and of the correlation linking this mass to the haze allows proposing a new physically-based model able to predict the development of the haze on sheltered glass. Finally, a comparison of the model predictions with the independent measurements performed at the experimental sites of the AERO program shows that the model is able to simulate correctly the development of the haze at a variety of urban sites ranging from the Suburban to Roadside categories. This predictive tool should help developing conservation strategies adapted to the real environmental conditions of the historical and modern buildings.

The Study of Stability of Compression-loaded Multispan Composite Panel Upon Failure of elements Binding it to Panel Supports

NASA Technical Reports Server (NTRS)

Zamula, G. N.; Ierusalimsky, K. M.; Fomin, V. P.; Grishin, V. I.; Kalmykova, G. S.

1999-01-01

The present document is a final technical report under the NCC-1-233 research program (dated September 15, 1998; see Appendix 5) carried out within co-operation between United States'NASA Langley RC and Russia's Goskomoboronprom in aeronautics, and continues similar programs, NCCW-73, NCC-1-233 and NCCW 1-233 accomplished in 1996, 1997, and 1998, respectively. The report provides results of "The study of stability of compression-loaded multispan composite panels upon failure of elements binding it to panel supports"; these comply with requirements established at TsAGI on 24 March 1998 and at NASA on 15 September 1998.

Sound transmission through lined, composite panel structures: Transversely isotropic poro-elastic model

NASA Astrophysics Data System (ADS)

Kim, Jeong-Woo

A joint experimental and analytical investigation of the sound transmission loss (STL) and two-dimensional free wave propagation in composite sandwich panels is presented here. An existing panel, a Nomex honeycomb sandwich panel, was studied in detail. For the purpose of understanding the typical behavior of sandwich panels, a composite structure comprising two aluminum sheets with a relatively soft, poro-elastic foam core was also constructed and studied. The cores of both panels were modeled using an anisotropic (transversely isotropic) poro-elastic material theory. Several estimation methods were used to obtain the material properties of the honeycomb core and the skin plates to be used in the numerical calculations. Appropriate values selected from among the estimates were used in the STL and free wave propagation models. The prediction model was then verified in two ways: first, the calculated wave speeds and STL of a single poro-elastic layer were numerically verified by comparison with the predictions of a previously developed isotropic model. Secondly, to physically validate the transversely isotropic model, the measured STL and the phase speeds of the sandwich panels were compared with their predicted values. To analyze the actual treatment of a fuselage structure, multi-layered configurations, including a honeycomb panel and several layers such as air gaps, acoustic blankets and membrane partitions, were formulated. Then, to find the optimal solution for improving the sound barrier performance of an actual fuselage system, air layer depth and glass fiber lining effects were investigated by using these multi-layer models. By using the free wave propagation model, the first anti-symmetric and symmetric modes of the sandwich panels were characterized to allow the identification of the coincidence frequencies of the sandwich panel. The behavior of the STL could then be clearly explained by comparison with the free wave propagation solutions. By performing a parameter study based both on the STL and free wave propagation speeds, the mass, stiffness and damping-controlled regions of the STL were identified. The structural factors that can be adjusted to improve STL performance were also identified.

Tilted membrane panel: A new module concept to maximize the impact of air bubbles for membrane fouling control in microalgae harvesting.

PubMed

Eliseus, A; Bilad, M R; Nordin, N A H M; Putra, Z A; Wirzal, M D H

2017-10-01

Microalgae harvesting using membrane technology is challenging because of its high fouling propensity. As an established fouling mitigation technique, efficacy of air bubbles can be improved by maximizing the impact of shear-rates in scouring foulant. In this study, it is achieved by tilting the membrane panel. We investigate the effect of tilting angle, switching period as well as aeration rate during microalgal broth filtration. Results show that higher tilting angles (up to 20°) improve permeability of up to 2.7 times of the vertical panel. In addition, operating a one-sided panel is better than a two-sided panel, in which the later involved switching mode. One-sided membrane panel only require a half of area, yet its performance is comparable with of a large-scale module. This tilted panel can lead to significant membrane cost reductions and eventually improves the competitiveness of membrane technology for microalgae harvesting application. Copyright © 2017 Elsevier Ltd. All rights reserved.

Description of Panel Method Code ANTARES

NASA Technical Reports Server (NTRS)

Ulbrich, Norbert; George, Mike (Technical Monitor)

2000-01-01

Panel method code ANTARES was developed to compute wall interference corrections in a rectangular wind tunnel. The code uses point doublets to represent blockage effects and line doublets to represent lifting effects of a wind tunnel model. Subsonic compressibility effects are modeled by applying the Prandtl-Glauert transformation. The closed wall, open jet, or perforated wall boundary condition may be assigned to a wall panel centroid. The tunnel walls can be represented by using up to 8000 panels. The accuracy of panel method code ANTARES was successfully investigated by comparing solutions for the closed wall and open jet boundary condition with corresponding Method of Images solutions. Fourier transform solutions of a two-dimensional wind tunnel flow field were used to check the application of the perforated wall boundary condition. Studies showed that the accuracy of panel method code ANTARES can be improved by increasing the total number of wall panels in the circumferential direction. It was also shown that the accuracy decreases with increasing free-stream Mach number of the wind tunnel flow field.

The method of neutron imaging as a tool for the study of the dynamics of water movement in wet aramid-based ballistic body armour panels

NASA Astrophysics Data System (ADS)

Reifler, Felix A.; Lehmann, Eberhard H.; Frei, Gabriel; May, Hans; Rossi, René

2006-07-01

A new non-destructive method based on neutron imaging (neutron radiography) to determine the exact water content in aramid-based soft body armour panels is presented. While investigating the ballistic resistance of aramid-based body armour panels under a wet condition, it is important to precisely determine their water content and its chronological development. Using the presented method, the influence of water amount and location on impact testing as well as its time dependence was shown. In the ballistic panels used, spreading of water strongly depended on the kind of quilting. Very fast water migration could be observed when the panels were held vertically. Some first results regarding the water distribution in wet panels immediately after the impact are presented. On the basis of the presented results, requirements for a standard for testing the performance of ballistic panels in the wet state are deduced.

An efficient model for coupling structural vibrations with acoustic radiation

NASA Technical Reports Server (NTRS)

Frendi, Abdelkader; Maestrello, Lucio; Ting, LU

1993-01-01

The scattering of an incident wave by a flexible panel is studied. The panel vibration is governed by the nonlinear plate equations while the loading on the panel, which is the pressure difference across the panel, depends on the reflected and transmitted waves. Two models are used to calculate this structural-acoustic interaction problem. One solves the three dimensional nonlinear Euler equations for the flow-field coupled with the plate equations (the fully coupled model). The second uses the linear wave equation for the acoustic field and expresses the load as a double integral involving the panel oscillation (the decoupled model). The panel oscillation governed by a system of integro-differential equations is solved numerically and the acoustic field is then defined by an explicit formula. Numerical results are obtained using the two models for linear and nonlinear panel vibrations. The predictions given by these two models are in good agreement but the computational time needed for the 'fully coupled model' is 60 times longer than that for 'the decoupled model'.

Study of advanced composite structural design concepts for an arrow wing supersonic cruise configuration, task 3

NASA Technical Reports Server (NTRS)

1978-01-01

A structural design study was conducted to assess the relative merits of structural concepts using advanced composite materials for an advanced supersonic aircraft cruising at Mach 2.7. The configuration and structural arrangement developed during Task I and II of the study, was used as the baseline configuration. Allowable stresses and strains were established for boron and advanced graphite fibers based on projected fiber properties available in the next decade. Structural concepts were designed and analyzed using graphite polyimide and boron polyimide, applied to stiffened panels and conventional sandwich panels. The conventional sandwich panels were selected as the structural concept to be used on the wing structure. The upper and lower surface panels of the Task I arrow wing were redesigned using high-strength graphite polyimide sandwich panels over the titanium spars and ribs. The ATLAS computer system was used as the basis for stress analysis and resizing the surface panels using the loads from the Task II study, without adjustment for change in aeroelastic deformation. The flutter analysis indicated a decrease in the flutter speed compared to the baseline titanium wing design. The flutter analysis indicated a decrease in the flutter speed compared to the baseline titanium wing design. The flutter speed was increased to that of the titanium wing, with a weight penalty less than that of the metallic airplane.

Minimum prick test panel for adult patients with asthma and rhinitis in Ankara, Turkey.

PubMed

Comert, Sule; Demir, A Ugur; Karakaya, Gul; Kalyoncu, A Fuat

2014-05-01

Determination of the number and type of allergens needed to be tested in epidemiological studies is important in order to identify most of the sensitized subjects with a cost-effective approach. This study aimed to investigate the minimum skin prick test panel for the identification of at least 95% of the sensitized subjects with symptoms of asthma and/or allergic rhinitis (AR) in Ankara, Turkey. Skin prick test results of 7492 patients who were referred to our outpatient clinic with clinical symptoms of asthma and/or AR between 1991 and 2005 were evaluated retrospectively. Seven allergens were tested in all and 13 allergens in 4202 patients. The allergen group needed for detection of 95% of the sensitized subjects was determined for both the 7 and 13 allergen panels. The study protocol was approved by the local ethics committee of Hacettepe University. The atopy prevalences in the whole study population and in 4202 patients tested with the 13 allergen panel were calculated as 32.2% and 42.6%, respectively. Three allergens (Phleum pratense, Dermatophagoides pteronyssinus and Artemisia vulgaris) within the 7 allergen panel were adequate for the identification of at least 95% of the sensitized subjects. Olea europae was added to the previous three allergens when the 13 allergen panel was applied. Three to four allergens are sufficient for identification at least 95% of sensitized subjects with asthma and/or AR in Ankara, Turkey.

[The impact of ambient fine particulate matter on the blood pressure of an urban population in Shanghai, China: a panel study].

PubMed

Xu, W X; Chen, R J; Kan, H D

2016-08-06

To investigate the impact of particulate matter 2.5 (PM2.5) on the blood pressure of urban residents in Shanghai, China. A panel study was conducted from May 27(th) to June 5(th) 2014 in a cohort of 30 adults in an urban community. Participants were 50-80 years old, had lived in the community for at least 5 years, and had a good health status. Key exclusion criteria were current smoking, smoking during the last 3 years, passive smoking, alcohol consumption, and severe cardiopulmonary disease. A total of 28 participants were eligible. Information on demographic characteristics, including of age, sex, height, weight, education, income and chronic comorbidities were collected. Participants were requested to have six weekly blood pressure measurements. Real-time concentrations of PM2.5 and gaseous pollutants were obtained from a nearby air quality monitor during 40 d. Pearson correlation was applied to analyze the correlation between PM2.5 and SO2, NO2, CO and O3. Linear mixed models were applied to analyze the association between PM2.5 and blood pressure, after controlling for time-related trends, day of the week, mean temperature, relative humidity and individual characteristics. The mean systolic and diastolic blood pressure was (124.0±15.0) mmHg (1 mmHg=0.133 kPa) and (74.0±7.7) mmHg, respectively. At 24 h before blood pressure measurement, the mean PM2.5, SO2, NO2, O3 and CO concentration were (8.3±4.9), (46.6±12.9) , (79.2±27.4) μg/m(3) and (0.8±0.2) mg/m(3). The Pearson correlation coefficient R, between PM2.5 and O3, SO2, NO2 and CO was 0.79, 0.59, 0.34 and 0.45, respectively, with corresponding P-values of <0.001, 0.006, 0.012 and 0.009, respectively. The significant correlation between PM2.5 and systolic blood pressure occurred at lag 1 day, was strongest at lag 3 day, but attenuated thereafter. A 10 μg/m(3) increase in 3-day average concentrations of PM2.5 was associated with changes of 1.86 (95%CI: 0.62-3.09) mmHg in systolic blood pressure and -0.05 (95%CI: 0.59-0.50) mmHg in diastolic blood pressure. Short-term exposure to PM2.5 may significantly elevate the systolic blood pressure of urban residents in Shanghai.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anggoro, Didi Dwi, E-mail: anggorophd@gmail.com; Kristiana, Nunung, E-mail: nuna.c631@gmail.com

Ballistic protection equipment, such as a bulletproof vest, is a soldier’s most important means of preserving life and survivability in extreme combat conditions. The bulletproof vests are designed to protect the user’s chest from injury without disturbing the ability to perform his duties. Aromatic polyamide or aramid fibers known under the trade name Kevlar, Trawon and so is synthetic fiber materials commonly used in the manufacture of bulletproof vests. This synthetic fibers have high tensile strength and ductility. Kevlar is expensive and imported material. In this study, will introduce local natural raw materials, ramie fiber (Boehmeria nivea) which is cheapermore » and environmentally friendly. It has enough tenacity and tensile strength as a bulletproof vest. This experiment uses two panels, there are Panel A as front surface of Panel B. Panel A is a combination of ramie and epoxide matrix, while panel B is only ramie. From several variations of experimental combinations between Panel A and Panel B, optimal combination obtained with 16 layers of panel A and 31-34 layers of panel B which is able to protect againts cal. 7.65 mm × 17 mm (.32 ACP) bullet fired through pistol .32 Pindad from a distance of 20 meters. Panel with a size of 20 cm × 20 cm has a total thickness between 12,922 to13,745 mm and a total weight between 506,26 to 520,926gram. Scanning electron microscopy (SEM) observations indicated that the porosity and surface area of the ramie fiber is smooth, fiber surfaces showed topography with micropores. SEM also showed well-arranged structure of fibers bonding. Energy Dispersive X-ray (EDX) analysis indicated 100 % carbon contents in ramie fiber. Test result indicates that panel from composite ramie-epoxide can reach the level 1of International Standard of NIJ - 010104. Compared to panel from polyester fiber, the panel from composite ramie-epoxide (0,50-0,52 kg) is lighter weight than panel polyester fiber (1,642 kg)« less

Combination of natural fiber Boehmeria nivea (ramie) with matrix epoxide for bullet proof vest body armor

NASA Astrophysics Data System (ADS)

Anggoro, Didi Dwi; Kristiana, Nunung

2015-12-01

Ballistic protection equipment, such as a bulletproof vest, is a soldier's most important means of preserving life and survivability in extreme combat conditions. The bulletproof vests are designed to protect the user's chest from injury without disturbing the ability to perform his duties. Aromatic polyamide or aramid fibers known under the trade name Kevlar, Trawon and so is synthetic fiber materials commonly used in the manufacture of bulletproof vests. This synthetic fibers have high tensile strength and ductility. Kevlar is expensive and imported material. In this study, will introduce local natural raw materials, ramie fiber (Boehmeria nivea) which is cheaper and environmentally friendly. It has enough tenacity and tensile strength as a bulletproof vest. This experiment uses two panels, there are Panel A as front surface of Panel B. Panel A is a combination of ramie and epoxide matrix, while panel B is only ramie. From several variations of experimental combinations between Panel A and Panel B, optimal combination obtained with 16 layers of panel A and 31-34 layers of panel B which is able to protect againts cal. 7.65 mm × 17 mm (.32 ACP) bullet fired through pistol .32 Pindad from a distance of 20 meters. Panel with a size of 20 cm × 20 cm has a total thickness between 12,922 to13,745 mm and a total weight between 506,26 to 520,926gram. Scanning electron microscopy (SEM) observations indicated that the porosity and surface area of the ramie fiber is smooth, fiber surfaces showed topography with micropores. SEM also showed well-arranged structure of fibers bonding. Energy Dispersive X-ray (EDX) analysis indicated 100 % carbon contents in ramie fiber. Test result indicates that panel from composite ramie-epoxide can reach the level 1of International Standard of NIJ - 010104. Compared to panel from polyester fiber, the panel from composite ramie-epoxide (0,50-0,52 kg) is lighter weight than panel polyester fiber (1,642 kg).

Analysis of Wind Forces on Roof-Top Solar Panel

NASA Astrophysics Data System (ADS)

Panta, Yogendra; Kudav, Ganesh

2011-03-01

Structural loads on solar panels include forces due to high wind, gravity, thermal expansion, and earthquakes. International Building Code (IBC) and the American Society of Civil Engineers are two commonly used approaches in solar industries to address wind loads. Minimum Design Loads for Buildings and Other Structures (ASCE 7-02) can be used to calculate wind uplift loads on roof-mounted solar panels. The present study is primarily focused on 2D and 3D modeling with steady, and turbulent flow over an inclined solar panel on the flat based roof to predict the wind forces for designing wind management system. For the numerical simulation, 3-D incompressible flow with the standard k- ɛ was adopted and commercial CFD software ANSYS FLUENT was used. Results were then validated with wind tunnel experiments with a good agreement. Solar panels with various aspect ratios for various high wind speeds and angle of attacks were modeled and simulated in order to predict the wind loads in various scenarios. The present study concluded to reduce the strong wind uplift by designing a guide plate or a deflector before the panel. Acknowledgments to Northern States Metal Inc., OH (GK & YP) and School of Graduate Studies of YSU for RP & URC 2009-2010 (YP).

Does inequality in health impede economic growth?

PubMed

Grimm, Michael

2011-01-01

This paper investigates the effects of inequality in health on economic growth in low and middle income countries. The empirical part of the paper uses an original cross-national panel data set covering 62 low and middle income countries over the period 1985 to 2007. I find a substantial and relatively robust negative effect of health inequality on income levels and income growth controlling for life expectancy, country and time fixed-effects and a large number of other effects that have been shown to matter for growth. The effect also holds if health inequality is instrumented to circumvent a potential problem of reverse causality. Hence, reducing inequality in the access to health care and to health-related information can make a substantial contribution to economic growth.

My Brother’s Keeper National Lab Week

NASA Image and Video Library

2016-03-02

Students in the My Brother’s Keeper program line the railings of an observation deck overlooking the Granular Mechanics and Regolith Operations Lab at NASA’s Kennedy Space Center in Florida. The spaceport is one of six NASA centers that participated in My Brother’s Keeper National Lab Week. The event is a nationwide effort to bring youth from underrepresented communities into federal labs and centers for hands-on activities, tours and inspirational speakers. Sixty students from the nearby cities of Orlando and Sanford visited Kennedy, where they toured the Vehicle Assembly Building, the Space Station Processing Facility and the center’s innovative Swamp Works Labs. The students also had a chance to meet and ask questions of a panel of subject matter experts from across Kennedy.

Quantum Sensing for High Energy Physics

DOE Office of Scientific and Technical Information (OSTI.GOV)

van Bibber, Karl; Boshier, Malcolm; Demarteau, Marcel

The Coordinating Panel for Advanced Detectors (CPAD) of the APS Division of Particles and Fields organized a first workshop on Quantum Sensing for High Energy Physics (HEP) in early December 2017 at Argonne National Laboratory. Participants from universities and national labs were drawn from the intersecting fields of Quantum Information Science (QIS), high energy physics, atomic, molecular and optical physics, condensed matter physics, nuclear physics and materials science. Quantum-enabled science and technology has seen rapid technical advances and growing national interest and investments over the last few years. The goal of the workshop was to bring the various communities togethermore » to investigate pathways to integrate the expertise of these two disciplines to accelerate the mutual advancement of scientific progress.« less

My Brother’s Keeper National Lab Week

NASA Image and Video Library

2016-03-02

Students in the My Brother’s Keeper program get an inside look at NASA Kennedy Space Center’s iconic Vehicle Assembly Building from the transfer aisle. The Florida spaceport is one of six NASA centers that participated in My Brother’s Keeper National Lab Week. The event is a nationwide effort to bring youth from underrepresented communities into federal labs and centers for hands-on activities, tours and inspirational speakers. Sixty students from the nearby cities of Orlando and Sanford visited Kennedy, where they toured the Vehicle Assembly Building, the Space Station Processing Facility and the center’s innovative Swamp Works Labs. The students also had a chance to meet and ask questions of a panel of subject matter experts from across Kennedy.

My Brother’s Keeper National Lab Week

NASA Image and Video Library

2016-03-02

Students in the My Brother’s Keeper program try out some of the machinery inside the Prototype Lab at NASA’s Kennedy Space Center. The Florida spaceport is one of six NASA centers that participated in My Brother’s Keeper National Lab Week. The event is a nationwide effort to bring youth from underrepresented communities into federal labs and centers for hands-on activities, tours and inspirational speakers. Sixty students from the nearby cities of Orlando and Sanford visited Kennedy, where they toured the Vehicle Assembly Building, the Space Station Processing Facility and the center’s innovative Swamp Works Labs. The students also had a chance to meet and ask questions of a panel of subject matter experts from across Kennedy.

My Brother’s Keeper National Lab Week

NASA Image and Video Library

2016-03-02

Mike Lane demonstrates a 3D scanner inside the NASA Kennedy Space Center Prototype Lab for students in the My Brother’s Keeper program. The Florida spaceport is one of six NASA centers that participated in My Brother’s Keeper National Lab Week. The event is a nationwide effort to bring youth from underrepresented communities into federal labs and centers for hands-on activities, tours and inspirational speakers. Sixty students from the nearby cities of Orlando and Sanford visited Kennedy, where they toured the Vehicle Assembly Building, the Space Station Processing Facility and the center’s innovative Swamp Works Labs. The students also had a chance to meet and ask questions of a panel of subject matter experts from across Kennedy.

My Brother’s Keeper National Lab Week

NASA Image and Video Library

2016-03-02

Jose Nunez of NASA Kennedy Space Center’s Exploration Research and Technology Programs talks to students in the My Brother’s Keeper program outside the Florida spaceport’s Swamp Works Lab. Kennedy is one of six NASA centers that participated in My Brother’s Keeper National Lab Week. The event is a nationwide effort to bring youth from underrepresented communities into federal labs and centers for hands-on activities, tours and inspirational speakers. Sixty students from the nearby cities of Orlando and Sanford visited Kennedy, where they toured the Vehicle Assembly Building, the Space Station Processing Facility and the center’s innovative Swamp Works Labs. The students also had a chance to meet and ask questions of a panel of subject matter experts from across Kennedy.

Brain Health: The Importance of Recognizing Cognitive Impairment: An IAGG Consensus Conference

PubMed Central

Morley, John E.; Morris, John C.; Berg-Weger, Marla; Borson, Soo; Carpenter, Brian D.; del Campo, Natalia; Dubois, Bruno; Fargo, Keith; Fitten, L. Jaime; Flaherty, Joseph H.; Ganguli, Mary; Grossberg, George T.; Malmstrom, Theodore K.; Petersen, Ronald D.; Rodriguez, Carroll; Saykin, Andrew J.; Scheltens, Philip; Tangalos, Eric G.; Verghese, Joe; Wilcock, Gordon; Winblad, Bengt; Woo, Jean; Vellas, Bruno

2016-01-01

Cognitive impairment creates significant challenges for patients, their families and friends, and clinicians who provide their health care. Early recognition allows for diagnosis and appropriate treatment, education, psychosocial support, and engagement in shared decision-making regarding life planning, health care, involvement in research, and financial matters. An IAGG-GARN consensus panel examined the importance of early recognition of impaired cognitive health. Their major conclusion was that case-finding by physicians and health professionals is an important step toward enhancing brain health for aging populations throughout the world. This conclusion is in keeping with the position of the United States’ Centers for Medicare and Medicaid Services that reimburses for detection of cognitive impairment as part the of Medicare Annual Wellness Visit and with the international call for early detection of cognitive impairment as a patient’s right. The panel agreed on the following specific findings: (1) validated screening tests are available that take 3 to 7 minutes to administer; (2) a combination of patient- and informant-based screens is the most appropriate approach for identifying early cognitive impairment; (3) early cognitive impairment may have treatable components; and (4) emerging data support a combination of medical and lifestyle interventions as a potential way to delay or reduce cognitive decline. PMID:26315321

Application of the Kohonen artificial neural network in the identification of proteinaceous binders in samples of panel painting using gas chromatography-mass spectrometry.

PubMed

Lletí, R; Sarabia, L A; Ortiz, M C; Todeschini, R; Colombini, M P

2003-03-01

Historically, three types of proteinaceous matter--casein, egg and animal glue--were used as binders for pigments or as adhesives in easel and wall painting. The relative percentage content of alanine, glycine, valine, leucine, isoleucine, serine, tyrosine, phenylalanine, aspartic acid, glutamic acid, lysine, methionine, proline and hydroxyproline, as determined by GC-MS, is used for binder identification. In this paper we analyse the viability of a multivariate modelling using Kohonen's neural network to characterise the wood adhesive in 16 old samples from Italian panel paintings of the 12-16th centuries. As a training set we use the amino acid composition of 141 samples contributed by the Opificio delle Pietre Dure of Florence (Cultural Heritage Ministry, Italy). Of the 141 samples, 113 were used to train the Kohonen neural network and the remaining 28 as the evaluation set. A specificity and sensitivity of 100% was achieved in training and 92-100% in prediction depending on the assignation criteria employed. The neural network thus trained and evaluated was applied to the old samples, achieving identification of all of them. In addition, the map obtained for each amino acid provides relevant information as to its importance in the characterisation of the sample.

Open-Mode Debonding Analysis of Curved Sandwich Panels Subjected to Heating and Cryogenic Cooling on Opposite Faces

NASA Technical Reports Server (NTRS)

Ko, William L.

1999-01-01

Increasing use of curved sandwich panels as aerospace structure components makes it vital to fully understand their thermostructural behavior and identify key factors affecting the open-mode debonding failure. Open-mode debonding analysis is performed on a family of curved honeycomb-core sandwich panels with different radii of curvature. The curved sandwich panels are either simply supported or clamped, and are subjected to uniform heating on the convex side and uniform cryogenic cooling on the concave side. The finite-element method was used to study the effects of panel curvature and boundary condition on the open-mode stress (radial tensile stress) and displacement fields in the curved sandwich panels. The critical stress point, where potential debonding failure could initiate, was found to be at the midspan (or outer span) of the inner bonding interface between the sandwich core and face sheet on the concave side, depending on the boundary condition and panel curvature. Open-mode stress increases with increasing panel curvature, reaching a maximum value at certain high curvature, and then decreases slightly as the panel curvature continues to increase and approach that of quarter circle. Changing the boundary condition from simply supported to clamped reduces the magnitudes of open-mode stresses and the associated sandwich core depth stretching.

A Feasibility Study on Using an Internet-Panel Survey to Measure Perceptions of E-cigarettes in 3 Metropolitan Areas, 2015.

PubMed

Miller, Eric A; Berman, Lewis; Atienza, Audie; Middleton, Deirdre; Iachan, Ronaldo; Tortora, Robert; Boyle, John

Internet-panel surveys are emerging as a means to quickly and cost-effectively collect health data, and because of their large memberships, they could be used for community-level surveys. To determine the feasibility of using an internet-panel survey to quickly provide community-level data, we conducted a pilot test of a health survey in 3 US metropolitan areas. We conducted internet-panel surveys in Cleveland, Ohio; New York, New York; and Seattle, Washington, in 2015. Slightly more than 500 people responded to the survey in each city. We compared weighted unadjusted prevalence estimates from the internet-panel data with estimates from the 2014 Health Information National Trends Survey (HINTS) for the following question in each survey: "Compared to smoking cigarettes, would you say that electronic cigarettes are…much less harmful, less harmful, just as harmful, more harmful, much more harmful, or I've never heard of electronic cigarettes." We used multivariable logistic regression to compare associations of respondents' demographic and health characteristics with perceived harm from e-cigarettes. The prevalence of the perception that e-cigarettes are less harmful than smoking cigarettes ranged from 35.9% to 39.9% in the internet-panel sites and was 43.0% in HINTS. Most patterns of beliefs and respondent characteristics in the internet-panel data were consistent with patterns in HINTS. We found inconsistent patterns between internet-panel sites and HINTS by race/ethnicity and education. This feasibility study found that internet-panel surveys could quickly produce community-level data for targeted public health interventions and evaluation, but they may be limited in producing estimates among subgroups.

Display Techniques for Advanced Crew Stations (DTACS). Phase 1. Display Techniques Study.

DTIC Science & Technology

1984-03-01

26 3.1.3 Off Screen Displays .. ................... 27 3.1.4 Flat Panel Displays. .. ................. 27 3.2 FORMAT REQUIREMENTS...Head-Up Display ....... .................... ... 96 4.5.2 Display Panel .... ................. 98 4.5.3 RGB Calligraphic Display ................ 99...117 3.4 VOICE WARNING/RESPONSE TECHNOLOGY .............. . i.117 5.5 TOUCH PANEL TECHNOLOGY ..... ................ ... 118 5.6

A Note on Improving Process Efficiency in Panel Surveys with Paradata

ERIC Educational Resources Information Center

Kreuter, Frauke; Müller, Gerrit

2015-01-01

Call scheduling is a challenge for surveys around the world. Unlike cross-sectional surveys, panel surveys can use information from prior waves to enhance call-scheduling algorithms. Past observational studies showed the benefit of calling panel cases at times that had been successful in the past. This article is the first to experimentally assign…

Panel Conditioning in a Longitudinal Study of Adolescents' Substance Use: Evidence from an Experiment

ERIC Educational Resources Information Center

Torche, Florencia; Warren, John Robert; Halpern-Manners, Andrew; Valenzuela, Eduardo

2012-01-01

Panel surveys are widely used in sociology to examine life-course trajectories and to assess causal effects. However, when using panel data researchers usually assume that the act of measuring respondents' attitudes and behaviors has no effect on the attributes being measured or on the accuracy of reports about those attributes. Evidence from…

Citizen Review Panels for Child Protective Services: A National Profile

ERIC Educational Resources Information Center

Jones, Blake L.; Royse, David

2008-01-01

Citizen Review Panels (CRPs) for Child Protective Services are groups of citizen-volunteers throughout the United States who are federally mandated to evaluate local and state child protection systems. This study presents a profile of 332 CRP members in 20 states with regards to their demographic information, length of time on the panel, and …

Multipurpose panel, phase 1, study report. [display utilizing multiplexing and digital techniques

NASA Technical Reports Server (NTRS)

Parkin, W.

1975-01-01

The feasibility of a multipurpose panel which provides a programmable electronic display for changeable panel nomenclature, multiplexes similar indicator display signals to the signal display, and demultiplexes command signals is examined. Topics discussed include: electronic display technology, miniaturized electronic and memory devices, and data management systems which employ digital address and multiplexing.

Predicting bending stiffness of randomly oriented hybrid panels

Treesearch

Laura Moya; William T.Y. Tze; Jerrold E. Winandy

2010-01-01

This study was conducted to develop a simple model to predict the bending modulus of elasticity (MOE) of randomly oriented hybrid panels. The modeling process involved three modules: the behavior of a single layer was computed by applying micromechanics equations, layer properties were adjusted for densification effects, and the entire panel was modeled as a three-...

Setting up an Online Panel Representative of the General Population: The German Internet Panel

ERIC Educational Resources Information Center

Blom, Annelies G.; Gathmann, Christina; Krieger, Ulrich

2015-01-01

This article looks into the processes and outcomes of setting up and maintaining a probability-based longitudinal online survey, which is recruited face-to-face and representative of both the online and the offline population aged 16-75 in Germany. This German Internet Panel studies political and economic attitudes and reform preferences through…

Analysis of the Final Report of the Fundamental Science Review: A Blueprint for Research, A Call for Action

ERIC Educational Resources Information Center

Canadian Association of University Teachers, 2017

2017-01-01

Canadian Association of University Teachers (CAUT) welcomes the report of the Advisory Panel on Federal Support for Fundamental Science "the Panel". It is a thoughtful and comprehensive study that correctly diagnoses problems that have plagued basic science for over a decade. The Panel's recommendations, if implemented, will chart a…

76 FR 10039 - National Institute of Diabetes and Digestive and Kidney Diseases; Notice of Closed Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-23

... Diabetes and Digestive and Kidney Diseases Special Emphasis Panel; Chronic Pelvic Pain Clinical Study. Date... Digestive and Kidney Diseases Special Emphasis Panel; Ulcerative Colitis Clinical Trials. Date: March 29... Diseases Special Emphasis Panel; Urology Clinical Trials. Date: March 30, 2011. Time: 2:30 p.m. to 3:30 p.m...

--No Title--

Science.gov Websites

;,Helvetica,sans-serif;font-weight:400}.nav-tabs,.panel-group .panel-heading>.panel-title{font {background-image:url({{f:1031}})}.panel-group .panel{margin-bottom:12px}.panel-group .panel+.panel{margin-top :1px}.panel-group .panel,.panel-group .panel-heading{border-radius:1px}.panel-group .panel:first-child

--No Title--

Science.gov Websites

}.panel-group .panel-heading>.panel-title{font-family:'Roboto','Helvetica Neue',Helvetica,Arial,sans /images/icon_plus_blue.svg)}.panel-group .panel{margin-bottom:12px}.panel-group .panel + .panel{margin-top :1px}.panel-group .panel,.panel-group .panel-heading{border-radius:1px}.panel-group .panel:first-child

An ancestry informative marker set for determining continental origin: validation and extension using human genome diversity panels

PubMed Central

Nassir, Rami; Kosoy, Roman; Tian, Chao; White, Phoebe A; Butler, Lesley M; Silva, Gabriel; Kittles, Rick; Alarcon-Riquelme, Marta E; Gregersen, Peter K; Belmont, John W; De La Vega, Francisco M; Seldin, Michael F

2009-01-01

Background Case-control genetic studies of complex human diseases can be confounded by population stratification. This issue can be addressed using panels of ancestry informative markers (AIMs) that can provide substantial population substructure information. Previously, we described a panel of 128 SNP AIMs that were designed as a tool for ascertaining the origins of subjects from Europe, Sub-Saharan Africa, Americas, and East Asia. Results In this study, genotypes from Human Genome Diversity Panel populations were used to further evaluate a 93 SNP AIM panel, a subset of the 128 AIMS set, for distinguishing continental origins. Using both model-based and relatively model-independent methods, we here confirm the ability of this AIM set to distinguish diverse population groups that were not previously evaluated. This study included multiple population groups from Oceana, South Asia, East Asia, Sub-Saharan Africa, North and South America, and Europe. In addition, the 93 AIM set provides population substructure information that can, for example, distinguish Arab and Ashkenazi from Northern European population groups and Pygmy from other Sub-Saharan African population groups. Conclusion These data provide additional support for using the 93 AIM set to efficiently identify continental subject groups for genetic studies, to identify study population outliers, and to control for admixture in association studies. PMID:19630973

Emerged/Emerging Disruptive Technologies (E2DT) (Technologies de rupture apparues/emergentes (E2DT)). Proceedings of the RTO Information Systems Technology Panel (IST) Symposium held in Madrid, Spain on 7-8 May 2011

DTIC Science & Technology

2011-05-01

with the potential to impact future military Information Systems. The second is to explore and identify innovative applications of these emerging or...NATO) BP 25, F-92201 Neuilly- sur -Seine Cedex, France RTO-MP-IST-099 Approved for Public release, distribution unlimited. Supporting documents are...Analysis and Studies Panel • SCI Systems Concepts and Integration Panel • SET Sensors and Electronics Technology Panel These bodies are made up of

Optmization and Fabrication Studies in the Development of Structurally Integrated Thermal Protection System Technology

NASA Technical Reports Server (NTRS)

Stephens, Craig A.

2009-01-01

NASA HYP M&S is pursuing the development of SITPS: 1) Working with HYP MDAO to formulate methodology to incorporate SITPS into hypersonic vehicle design trades. 2) SITPS-0 to SITPS-1 (FY10): a) Manufacturing development and weight reduction (5.8 to 3.1 lb(sub m)/sq ft); b) Structural testing to mature SITPS model. 3) SITPS-2 (FY11): a) Focus on panel closeout, panel-to-panel load transfer, and panel curvature. 4) Extend fabrication technology to include alternate cores and insulations (FY12).

IMPROVING EXPOSURE ASSESSMENT IN DISINFECTION BYPRODUCTS (DBP) EPIDEMIOLOGIC STUDIES

EPA Science Inventory

In 1997, an EPA expert panel was convened to evaluate epidemiologic studies of adverse reproductive or developmental outcomes that may be associated with drinking water DBPs. The panel recommended that further efforts be made in an existing cohort study, headed by Dr. Waller and ...

Environmental durability of electroplated black chromium

NASA Technical Reports Server (NTRS)

Lowery, J. R.

1981-01-01

A study was undertaken to determine the durability of nickel-black chromium plated aluminum in an outdoor rural industrial, and seacoast environment. Test panels were exposed to these environments for 60, 36, and 13 months, respectively. The results of this study showed that no significant optical degradation occurred from exposure to either of these environments, although a considerable amount of corrosion occurred on the panels exposed to the seacoast environment. The rural and industrial atmosphere produced only a slight amount of corrosion on test panels.

International Solar Cycle Studies (ISCS), "Solar Energy Flux Study: from the interior to the outer layer" — Working Group 1 report

NASA Astrophysics Data System (ADS)

Pap, Judit; Fröhlich, Claus

The purpose of this report is to describe the research activities and plans of Working Group 1: "Solar Energy Flux Study: From the Interior to the Outer Layer" of the International Solar Cycle Study (ISCS), which is an international research organization operating under the auspices of the Scientific Committee on Solar-Terrestrial Physics (SCOSTEP). As part of the report, we also summarize the status of the measurements and results on the solar energy flux variations. The main objective of ISCS's Working Group 1 is to coordinate and support comprehensive international research of the variations in the solar energy flux during the rising portion and maximum of solar cycle 23. The research activities of ISCS's Working Group 1 will concentrate on the following tasks: (1) to measure and study the variations in the solar radiative and mass output and solar activity indices during the solar activity cycle, (2) to understand why the solar radiative and mass output and the solar activity indices vary during the solar cycle, and (3) to study the role of solar variability in solar-terrestrial changes and its contribution to global change. ISCS WG1 "Solar Energy Flux Study: From the Interior to the Outer Layer" has been divided into three panels: •| Panel 1: Variations in Total and Spectral Irradiance from Infrared to Far UV. Panel leaders: Martin Anklin of the Physikalisch-Meteorologishes Observatorium Davos, Switzerland (total irradiance), Gerard Thuillier of the Service d'Aeronomie-CNRS, Verrieres, France (visible and infrared), and Linton Floyd of the Naval Research Laboratory, Washington, DC, USA (ultraviolet). •| Panel 2: Variations in EUV, X-ray and Particle Fluxes. Panel leaders: Gerhard Schmidtke of Fraunhofer IPM, Freiburg, Germany and W. Kent Tobiska of FDC/Jet Propulsion Laboratory, Pasadena, CA, USA (EUV/XUV), and David Winningham of the Southwest Research Institute, San Antonio, TX, USA (particles). •| Panel 3: Solar Indices, Cosmogenic Isotopes, Solar-Stellar Relations. Panel leaders: Gary Chapman of the San Fernando Observatory, CSUN, Northridge, CA, USA (solar indices), Juerg Beer of Institute for Environmental Science and Technology, Dübendorf, Switzerland (cosmogenic isotopes), and Sallie Baliunas of the Harvard Smithsonian Center for Astrophysics, Cambridge, MA, USA (solar-stellar relations). The first two panels concentrate on solar energy flux measurements, whereas the third panel concentrates on solar indices and alternative ways to model and predict irradiance variations at various wavelengths and their terrestrial/climate effects. Working Group 1 of ISCS has supported and adopted the "Thermospheric-Ionospheric Geospheric Research (TIGER)" program as part of ISCS/WG1/Panel 2. The main objectives of TIGER are to measure, model, and interpret solar EUV/UV and particle fluxes and to study and model their effect on the Earth's thermosphere and ionosphere (see details by Schmidtke et al., 2001, this volume). This approach links ISCS/WG1 activities directly with studies of our space environment.

Role of highway traffic on spatial and temporal distributions of air pollutants in a Swiss Alpine valley.

PubMed

Ducret-Stich, Regina E; Tsai, Ming-Yi; Ragettli, Martina S; Ineichen, Alex; Kuenzli, Nino; Phuleria, Harish C

2013-07-01

Traffic-related air pollutants show high spatial variability near roads, posing a challenge to adequately assess exposures. Recent modeling approaches (e.g. dispersion models, land-use regression (LUR) models) have addressed this but mostly in urban areas where traffic is abundant. In contrast, our study area was located in a rural Swiss Alpine valley crossed by the main North-south transit highway of Switzerland. We conducted an extensive measurement campaign collecting continuous nitrogen dioxide (NO₂), particulate number concentrations (PN), daily respirable particulate matter (PM10), elemental carbon (EC) and organic carbon (OC) at one background, one highway and seven mobile stations from November 2007 to June 2009. Using these measurements, we built a hybrid model to predict daily outdoor NO₂ concentrations at residences of children participating in an asthma panel study. With the exception of OC, daily variations of the pollutants followed the temporal trends of heavy-duty traffic counts on the highway. In contrast, variations of weekly/seasonal means were strongly determined by meteorological conditions, e.g., winter inversion episodes. For pollutants related to primary exhaust emissions (i.e. NO₂, EC and PN) local spatial variation strongly depended on proximity to the highway. Pollutant concentrations decayed to background levels within 150 to 200 m from the highway. Two separate daily NO₂ prediction models were built using LUR approaches with (a) short-term traffic and weather data (model 1) and (b) subsequent addition of daily background NO₂ to previous model (model 2). Models 1 and 2 explained 70% and 91% of the variability in outdoor NO₂ concentrations, respectively. The biweekly averaged predictions from the final model 2 agreed very well with the independent biweekly integrated passive measurements taken at thirteen homes and nine community sites (validation R(2)=0.74). The excellent spatio-temporal performance of our model provides a very promising basis for the health effect assessment of the panel study. Copyright © 2013 Elsevier B.V. All rights reserved.

Finite Element Modeling of the Buckling Response of Sandwich Panels

NASA Technical Reports Server (NTRS)

Rose, Cheryl A.; Moore, David F.; Knight, Norman F., Jr.; Rankin, Charles C.

2002-01-01

A comparative study of different modeling approaches for predicting sandwich panel buckling response is described. The study considers sandwich panels with anisotropic face sheets and a very thick core. Results from conventional analytical solutions for sandwich panel overall buckling and face-sheet-wrinkling type modes are compared with solutions obtained using different finite element modeling approaches. Finite element solutions are obtained using layered shell element models, with and without transverse shear flexibility, layered shell/solid element models, with shell elements for the face sheets and solid elements for the core, and sandwich models using a recently developed specialty sandwich element. Convergence characteristics of the shell/solid and sandwich element modeling approaches with respect to in-plane and through-the-thickness discretization, are demonstrated. Results of the study indicate that the specialty sandwich element provides an accurate and effective modeling approach for predicting both overall and localized sandwich panel buckling response. Furthermore, results indicate that anisotropy of the face sheets, along with the ratio of principle elastic moduli, affect the buckling response and these effects may not be represented accurately by analytical solutions. Modeling recommendations are also provided.

Study on The Effectiveness of Egg Tray and Coir Fibre as A Sound Absorber

NASA Astrophysics Data System (ADS)

Kaamin, Masiri; Farah Atiqah Ahmad, Nor; Ngadiman, Norhayati; Kadir, Aslila Abdul; Razali, Siti Nooraiin Mohd; Mokhtar, Mardiha; Sahat, Suhaila

2018-03-01

Sound or noise pollution has become one major issues to the community especially those who lived in the urban areas. It does affect the activity of human life. This excessive noise is mainly caused by machines, traffic, motor vehicles and also any unwanted sounds that coming from outside and even from the inside of the building. Such as a loud music. Therefore, the installation of sound absorption panel is one way to reduce the noise pollution inside a building. The selected material must be a porous and hollow in order to absorb high frequency sound. This study was conducted to evaluate the potential of egg tray and coir fibre as a sound absorption panel. The coir fibre has a good coefficient value which make it suitable as a sound absorption material and can replace the traditional material; syntactic and wooden material. The combination of pyramid shape of egg tray can provide a large surface for uniform sound reflection. This study was conducted by using a panel with size 1 m x 1 m with a thickness of 6 mm. This panel consist of egg tray layer, coir fibre layer and a fabric as a wrapping for the aesthetic value. Room reverberation test has been carried to find the loss of reverberation time (RT). Result shows that, a reverberation time reading is on low frequency, which is 125 Hz to 1600 Hz. Within these frequencies, this panel can shorten the reverberation time of 5.63s to 3.60s. Hence, from this study, it can be concluded that the selected materials have the potential as a good sound absorption panel. The comparison is made with the previous research that used egg tray and kapok as a sound absorption panel.

Buckling and postbuckling of composite panels with cutouts subjected to combined edge shear and temperature change

NASA Technical Reports Server (NTRS)

Noor, Ahmed K.; Kim, Yong H.

1995-01-01

The results of a detailed study of the buckling and postbuckling responses of composite panels with central circular cutouts are presented. The panels are subjected to combined edge shear and temperature change. The panels are discretized by using a two-field degenerate solid element with each of the displacement components having a linear variation throughout the thickness of the panel. The fundamental unknowns consist of the average mechanical strains through the thickness and the displacement components. The effects of geometric nonlinearities and laminated anisotropic material behavior are included. The stability boundary, postbuckling response and the hierarchical sensitivity coefficients are evaluated. The hierarchical sensitivity coefficients measure the sensitivity of the buckling and postbuckling responses to variations in the panel stiffnesses, and the material properties of both the individual layers and the constituents (fibers and matrix). Numerical results are presented for composite panels with central circular cutouts subjected to combined edge shear and temperature change, showing the effects of variations in the hole diameter, laminate stacking sequence and fiber orientation, on the stability boundary and postbuckling response and their sensitivity to changes in the various panel parameters.

Modeling Microalgae Productivity in Industrial-Scale Vertical Flat Panel Photobioreactors.

PubMed

Endres, Christian H; Roth, Arne; Brück, Thomas B

2018-05-01

Potentially achievable biomass yields are a decisive performance indicator for the economic viability of mass cultivation of microalgae. In this study, a computer model has been developed and applied to estimate the productivity of microalgae for large-scale outdoor cultivation in vertical flat panel photobioreactors. Algae growth is determined based on simulations of the reactor temperature and light distribution. Site-specific weather and irradiation data are used for annual yield estimations in six climate zones. Shading and reflections between opposing panels and between panels and the ground are dynamically computed based on the reactor geometry and the position of the sun. The results indicate that thin panels (≤0.05 m) are best suited for the assumed cell density of 2 g L -1 and that reactor panels should face in north-south direction. Panel spacings of 0.4-0.75 m at a panel height of 1 m appear most suitable for commercial applications. Under these preconditions, yields of around 10 kg m -2 a -1 are possible for most locations in the U.S. Only in hot climates significantly lower yields have to be expected, as extreme reactor temperatures limit overall productivity.

Damage Tolerance of Pre-Stressed Composite Panels Under Impact Loads

NASA Astrophysics Data System (ADS)

Johnson, Alastair F.; Toso-Pentecôte, Nathalie; Schueler, Dominik

2014-02-01

An experimental test campaign studied the structural integrity of carbon fibre/epoxy panels preloaded in tension or compression then subjected to gas gun impact tests causing significant damage. The test programme used representative composite aircraft fuselage panels composed of aerospace carbon fibre toughened epoxy prepreg laminates. Preload levels in tension were representative of design limit loads for fuselage panels of this size, and maximum compression preloads were in the post-buckle region. Two main impact scenarios were considered: notch damage from a 12 mm steel cube projectile, at velocities in the range 93-136 m/s; blunt impact damage from 25 mm diameter glass balls, at velocities 64-86 m/s. The combined influence of preload and impact damage on panel residual strengths was measured and results analysed in the context of damage tolerance requirements for composite aircraft panels. The tests showed structural integrity well above design limit loads for composite panels preloaded in tension and compression with visible notch impact damage from hard body impact tests. However, blunt impact tests on buckled compression loaded panels caused large delamination damage regions which lowered plate bending stiffness and reduced significantly compression strengths in buckling.

Composite panels based on woven sandwich-fabric preforms

NASA Astrophysics Data System (ADS)

van Vuure, Aart Willem

A new type of sandwich material was investigated, based on woven sandwich-fabric preforms. Because of the integrally woven nature of the sandwich-fabric the skin-core debonding resistance of panels and structures based on the preform is very high. As the sandwich-fabrics are produced by a large scale textile weaving process (velvet weaving or distance weaving) and already a preform of a sandwich is available, the cost of the final panel or structure can potentially stay limited. Most attention in this work is focussed on the mechanical performance of sandwich-fabric panels. The high skin-core debonding resistance was verified and also indications were found of a good damage tolerance. Both unfoamed and foamed panels were evaluated and compared with existing sandwich panels. Microstructural parameters investigated for unfoamed cores are pile length, pile density, woven pile angles, degree of pile stretching, tilt angles of the piles induced during panel production and resin content and distribution. For foamed panels it is especially the foam density which has an important influence. There appears to be a synergistic effect between piles and foam in the sandwich core, leading to very acceptable mechanical properties. For panels for (semi) structural applications, foaming is almost indispensable once the panel thickness is higher than about 15 mm. To understand the behaviour of foamed panels, attention was paid to the modelling of the mechanics of pure foam. The foam microstructure was modelled with the model of an anisotropic tetrakaidecahedron. The mechanical properties of unfoamed panels were modelled with the help of finite elements. A detailed geometrical description of the core layout was made which was incorporated into a preprocessing program for a finite element code. Attention is paid to the production of panels based on the woven preforms. A newly developed Adhesive Foil Stretching process was investigated. Also the foaming of panels was studied. A lot of attention was paid to a special application in the field of structural damping, where sandwich-fabric panels could be used as spacer in a constrained layer application. The vibrations and damping were modelled with the help of finite elements.

Foam composite structures. [for fire retardant airframe materials

NASA Technical Reports Server (NTRS)

Delano, C. B.; Milligan, R. J.

1976-01-01

The need to include fire resistant foams into state of the art aircraft interior paneling to increase passenger safety in aircraft fires was studied. Present efforts were directed toward mechanical and fire testing of panels with foam inclusions. Skinned foam filled honeycomb and PBI structural foams were the two constructions investigated with attention being directed toward weight/performance/cost trade-off. All of the new panels demonstrated improved performance in fire and some were lighter weight but not as strong as the presently used paneling. Continued efforts should result in improved paneling for passenger safety. In particular the simple partial filling (fire side) of state-of-the-art honeycomb with fire resistant foams with little sacrifice in weight would result in panels with increased fire resistance. More important may be the retarded rate of toxic gas evolution in the fire due to the protection of the honeycomb by the foam.

Design concerns of room and pillar retreat panels

PubMed Central

Klemetti, Ted M.; Sears, Morgan M.; Tulu, Ihsan B.

2017-01-01

Why do some room and pillar retreat panels encounter abnormal conditions? What factors deserve the most consideration during the planning and execution phases of mining and what can be done to mitigate those abnormal conditions when they are encountered? To help answer these questions, and to determine some of the relevant factors influencing the conditions of room and pillar (R & P) retreat mining entries, four consecutive R & P retreat panels were evaluated. This evaluation was intended to reinforce the influence of topographic changes, depth of cover, multiple-seam interactions, geological conditions, and mining geometry. This paper details observations were made in four consecutive R & P retreat panels and the data were collected from an instrumentation site during retreat mining. The primary focus was on the differences observed among the four panels and within the panels themselves. The instrumentation study was initially planned to evaluate the interactions between primary and secondary support, but produced rather interesting results relating to the loading encountered under the current mining conditions. In addition to the observation and instrumentation, numerical modeling was performed to evaluate the stress conditions. Both the LaModel 3.0 and Rocscience Phase 2 programs were used to evaluate these four panels. The results of both models indicated a drastic reduction in the vertical stresses experienced in these panels due to the full extraction mining in overlying seams when compared to the full overburden load. Both models showed a higher level of stress associated with the outside entries of the panels. These results agree quite well with the observations and instrumentation studies performed at the mine. These efforts provided two overarching conclusions concerning R & P retreat mine planning and execution. The first was that there are four areas that should not be overlooked during R & P retreat mining: topographic relief, multiple-seam stress relief, stress concentrations near the gob edge, and geologic changes in the immediate roof. The second is that in order to successfully retreat an R & P panel, a three-phased approach to the design and analysis of the panel should be conducted: the planning phase, evaluation phase, and monitoring phase. PMID:28626598

Nonlinear Analysis and Post-Test Correlation for a Curved PRSEUS Panel

NASA Technical Reports Server (NTRS)

Gould, Kevin; Lovejoy, Andrew E.; Jegley, Dawn; Neal, Albert L.; Linton, Kim, A.; Bergan, Andrew C.; Bakuckas, John G., Jr.

2013-01-01

The Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) concept, developed by The Boeing Company, has been extensively studied as part of the National Aeronautics and Space Administration's (NASA s) Environmentally Responsible Aviation (ERA) Program. The PRSEUS concept provides a light-weight alternative to aluminum or traditional composite design concepts and is applicable to traditional-shaped fuselage barrels and wings, as well as advanced configurations such as a hybrid wing body or truss braced wings. Therefore, NASA, the Federal Aviation Administration (FAA) and The Boeing Company partnered in an effort to assess the performance and damage arrestments capabilities of a PRSEUS concept panel using a full-scale curved panel in the FAA Full-Scale Aircraft Structural Test Evaluation and Research (FASTER) facility. Testing was conducted in the FASTER facility by subjecting the panel to axial tension loads applied to the ends of the panel, internal pressure, and combined axial tension and internal pressure loadings. Additionally, reactive hoop loads were applied to the skin and frames of the panel along its edges. The panel successfully supported the required design loads in the pristine condition and with a severed stiffener. The panel also demonstrated that the PRSEUS concept could arrest the progression of damage including crack arrestment and crack turning. This paper presents the nonlinear post-test analysis and correlation with test results for the curved PRSEUS panel. It is shown that nonlinear analysis can accurately calculate the behavior of a PRSEUS panel under tension, pressure and combined loading conditions.

Environmental and occupational particulate matter exposures and ectopic heart beats in welders

PubMed Central

Cavallari, Jennifer M.; Fang, Shona C.; Eisen, Ellen A.; Mittleman, Murray A.; Christiani, David C.

2016-01-01

Objectives Links between arrhythmias and particulate matter exposures have been found among sensitive populations. We examined the relationship between personal PM2.5 (particulate matter ≤ 2.5μm aerodynamic diameter) exposures and ectopy in a panel study of healthy welders. Methods Simultaneous ambulatory electrocardiogram (ECG) and personal PM2.5 exposure monitoring with DustTrak™ Aerosol Monitor was performed on 72 males during work and non-work periods for 5–90 hours (median 40 hours). ECGs were summarized hourly for supraventricular ectopy (SVE) and ventricular ectopy (VE). PM2.5 exposures both work and non-work periods were averaged hourly with lags from 0- to 7-hours. Generalized linear mixed-effects models with a random participant intercept were used to examine the relationship between PM2.5 exposure and the odds of SVE or VE. Sensitivity analyses were performed to assess whether relationships differed by work period and current smokers. Results Participants had a mean(SD) age of 38(11) years and were monitored over 2,993 person-hours. The number of hourly ectopic events was highly skewed with mean(sd) of 14(69) VE and 1(4) SVE. We found marginally significant increases in VE with PM2.5 exposures in the 6th and 7th hour lags, yet no association with SVE. For every 100μg/m3 increase in 6th hour lagged PM2.5, the adjusted OR(95% CI) for VE was 1.03(1.00, 1.05). Results persisted in work or non-work exposure periods and non-smokers had increased odds of VE associated with PM2.5 as compared to smokers. Conclusions A small increase in the odds of ventricular ectopy with short term PM2.5 exposure was observed among relatively healthy men with environmental and occupational exposures. PMID:27052768

Localized cortical chronic traumatic encephalopathy pathology after single, severe axonal injury in human brain.

PubMed

Shively, Sharon B; Edgerton, Sarah L; Iacono, Diego; Purohit, Dushyant P; Qu, Bao-Xi; Haroutunian, Vahram; Davis, Kenneth L; Diaz-Arrastia, Ramon; Perl, Daniel P

2017-03-01

Chronic traumatic encephalopathy (CTE) is a neurodegenerative disease associated with repetitive mild impact traumatic brain injury from contact sports. Recently, a consensus panel defined the pathognomonic lesion for CTE as accumulations of abnormally hyperphosphorylated tau (p-tau) in neurons (neurofibrillary tangles), astrocytes and cell processes distributed around small blood vessels at sulcal depths in irregular patterns within the cortex. The pathophysiological mechanism for this lesion is unknown. Moreover, a subset of CTE cases harbors cortical β-amyloid plaques. In this study, we analyzed postmortem brain tissues from five institutionalized patients with schizophrenia and history of surgical leucotomy with subsequent survival of at least another 40 years. Because leucotomy involves severing axons bilaterally in prefrontal cortex, this surgical procedure represents a human model of single traumatic brain injury with severe axonal damage and no external impact. We examined cortical tissues at the leucotomy site and at both prefrontal cortex rostral and frontal cortex caudal to the leucotomy site. For comparison, we analyzed brain tissues at equivalent neuroanatomical sites from non-leucotomized patients with schizophrenia, matched in age and gender. All five leucotomy cases revealed severe white matter damage with dense astrogliosis at the axotomy site and also neurofibrillary tangles and p-tau immunoreactive neurites in the overlying gray matter. Four cases displayed p-tau immunoreactivity in neurons, astrocytes and cell processes encompassing blood vessels at cortical sulcal depths in irregular patterns, similar to CTE. The three cases with apolipoprotein E ε4 haplotype showed scattered β-amyloid plaques in the overlying gray matter, but not the two cases with apolipoprotein E ε3/3 genotype. Brain tissue samples from prefrontal cortex rostral and frontal cortex caudal to the leucotomy site, and all cortical samples from the non-leucotomized patients, showed minimal p-tau and β-amyloid pathology. These findings suggest that chronic axonal damage contributes to the unique pathology of CTE over time.

Creep Behavior of Structural Insulated Panels (SIPS): Results from a Pilot Study

Treesearch

Dwight McDonald; Marshall Begel; C. Adam Senalik; Robert Ross; Thomas D. Skaggs; Borjen Yeh; Thomas Williamson

2014-01-01

Structural insulated panels (SIPs) have been recognized as construction materials in the International Residential Code (IRC) since 2009. Although most SIPs are used in wall applications, they can also be used as roof or floor panels that are subjected to long-term transverse loading, for which SIP creep performance may be critical in design. However, limited...

Returns to Education in Sri Lanka: A Pseudo-Panel Approach

ERIC Educational Resources Information Center

Himaz, Rozana; Aturupane, Harsha

2016-01-01

This study employs a pseudo-panel approach to estimate the returns to education among income earners in Sri Lanka. Pseudo-panel data are constructed from nine repeated cross sections of Sri Lanka's Labor Force Survey data from 1997 to 2008, for workers born during 1953-1974. The results show that for males, one extra year of education increases…

Collecting Panel Data in Developing Countries: Does It Make Sense? Living Standards Measurement Study Working Paper No. 23.

ERIC Educational Resources Information Center

Ashenfelter, Orley; And Others

There is no difference in principle between developing and developed countries in deciding whether it is desirable to collect panel data. However, there are many relevant circumstantial differences in developing countries. A number of aspects of the collection and use of panel data from developing country households are reviewed. Sampling issues…

Consumer and manufacturer perceptions of hardwood panels made from character-marked lumber

Treesearch

D. Nicholls; M. Bumgardner; V. Barber

2010-01-01

Hardwood panels made from edge-glued material are a versatile product that could be within the reach of many smaller wood products firms. However, products would need to be accepted throughout the supply chain for this opportunity to be achieved. This study evaluated preferences of consumers and manufacturers towards edge-glued panels from Alaskan red alder and paper...

The Use of a Nonprobability Internet Panel to Monitor Sexual and Reproductive Health in the General Population

ERIC Educational Resources Information Center

Legleye, Stéphane; Charrance, Géraldine; Razafindratsima, Nicolas; Bajos, Nathalie; Bohet, Aline; Moreau, Caroline

2018-01-01

Background: Reliability of nonprobability online volunteer panels for epidemiological purposes has rarely been studied. Objectives: To assess the quality of a questionnaire on sexual and reproductive health (SRH) administered in a nonprobability Web panel and in a random telephone survey (n = 8,992; n = 8,437, age 16-49 years). Especially, we were…

Energy transmission through a double-wall curved stiffened panel using Green's theorem

NASA Astrophysics Data System (ADS)

Ghosh, Subha; Bhattacharya, Partha

2015-04-01

It is a common practice in aerospace and automobile industries to use double wall panels as fuselage skins or in window panels to improve acoustic insulation. However, the scientific community is yet to develop a reliable prediction method for a suitable vibro-acoustic model for sound transmission through a curved double-wall panel. In this quest, the present work tries to delve into the modeling of energy transmission through a double-wall curved panel. Subsequently the radiation of sound power into the free field from the curved panel in the low to mid frequency range is also studied. In the developed model to simulate a stiffened aircraft fuselage configuration, the outer wall is provided with longitudinal stiffeners. A modal expansion theory based on Green's theorem is implemented to model the energy transmission through an acoustically coupled double-wall curved panel. An elemental radiator approach is implemented to calculate the radiated energy from the curved surface in to the free field. The developed model is first validated with various numerical models available. It has been observed in the present study that the radius of curvature of the surface has a prominent effect on the behavior of radiated sound power into the free field. Effect of the thickness of the air gap between the two curved surfaces on the sound power radiation has also been noted.

Application of water flowing PVC pipe and EPS foam bead as insulation for wall panel

NASA Astrophysics Data System (ADS)

Ali, Umi Nadiah; Nor, Norazman Mohamad; Yusuf, Mohammed Alias; Othman, Maidiana; Yahya, Muhamad Azani

2018-02-01

Malaysia located in tropical climate which have a typical temperature range between 21 °C to 36 °C. Due to this, air-conditioning system for buildings become a necessity to provide comfort to occupants. In order to reduce the energy consumption of the air-conditioning system, the transmission of heat from outdoor to indoor space should be kept as minimum as possible. This article discuss about a technology to resist heat transfer through concrete wall panel using a hybrid method. In this research, PVC pipe was embedded at the center of concrete wall panel while the EPS foam beads were added about 1% of the cement content in the concrete mix forming the outer layer of the wall panel. Water is regulated in the PVC pipe from the rainwater harvesting system. The aim of this study is to minimize heat transfer from the external environment into the building. Internal building temperature which indicated in BS EN ISO 7730 or ASHRAE Standard 55 where the comfort indoor thermal is below 25°C during the daytime. Study observed that the internal surface temperature of heat resistance wall panel is up to 3°C lower than control wall panel. Therefore, we can conclude that application of heat resistance wall panel can lead to lower interior building temperature.

A research program to reduce interior noise in general aviation airplanes: Investigation of the characteristics of an acoustic panel test facility

NASA Technical Reports Server (NTRS)

Grosveld, F.; Vanaken, J.

1978-01-01

Sound pressure levels in the test facility were studied that are caused by varying: (1) microphone positions; (2) equalizer setting; and (3) panel clamping forces. Measurements were done by using a Beranek tube or this Beranek tube in combinations with an extension tube and a special test section. In all configurations tests were executed with and without a test panel installed. The influence of the speaker back panel and the back panel of the Beranek tube on the sound pressure levels inside the test tube were also investigated. It is shown that the definition of noise reduction is more useful in relation to this test facility than transmission loss.

Study of the application of superplastically formed and diffusion bonded (SPF/DB) titanium structure to laminar flow control (LFC) wing design

NASA Technical Reports Server (NTRS)

Mcquilkin, F. T.

1979-01-01

Eighteen design concepts for a LFC wing cover, using various SPF/DB approaches, were developed. After evaluation of producibility, compatibility with LFC requirements, structural efficiency and fatigue requirements, three candidates were selected for fabrication of demonstration panels. Included were both sandwich and stiffened semi-sandwich panels with slotted and perforated surfaces. Subsequent to the evaluation of the three demonstration panels, one concept was selected for fabrication of a 0.3 x 1.0 meter (12 x 42 inch) feasibility panel. It was a stiffened, semi-sandwich panel with a slotted surface, designed to meet the requirements of the upper wing cover at the maximum wing bending moment of the baseline configuration.

Investigation on Wall Panel Sandwiched With Lightweight Concrete

NASA Astrophysics Data System (ADS)

Lakshmikandhan, K. N.; Harshavardhan, B. S.; Prabakar, J.; Saibabu, S.

2017-08-01

The rapid population growth and urbanization have made a massive demand for the shelter and construction materials. Masonry walls are the major component in the housing sector and it has brittle characteristics and exhibit poor performance against the uncertain loads. Further, the structure requires heavier sections for carrying the dead weight of masonry walls. The present investigations are carried out to develop a simple, lightweight and cost effective technology for replacing the existing wall systems. The lightweight concrete is developed for the construction of sandwich wall panel. The EPS (Expanded Polystyrene) beads of 3 mm diameter size are mixed with concrete and developed a lightweight concrete with a density 9 kN/m3. The lightweight sandwich panel is cast with a lightweight concrete inner core and ferrocement outer skins. This lightweight wall panel is tested for in-plane compression loading. A nonlinear finite element analysis with damaged plasticity model is carried out with both material and geometrical nonlinearities. The experimental and analytical results were compared. The finite element study predicted the ultimate load carrying capacity of the sandwich panel with reasonable accuracy. The present study showed that the lightweight concrete is well suitable for the lightweight sandwich wall panels.

A study on metallic thermal protection system panel for Reusable Launch Vehicle

NASA Astrophysics Data System (ADS)

Caogen, Yao; Hongjun, Lü; Zhonghua, Jia; Xinchao, Jia; Yan, Lu; Haigang, Li

2008-07-01

A Ni-based superalloy honeycomb thermal protection system (TPS) panel has been fabricated. And a curved Ni-based superalloy honeycomb sandwich has also been fabricated. The preliminary thermal insulation results of a fabricated Ni-based superalloy honeycomb TPS panel (the areal density of this panel is 6.7 kg /m2 and total height is 32 mm) indicate that the maximum temperature of the lower surfaces of the panel is lower than 150∘ C when the temperature of outer surface is held at 650∘ C for 30 min. The flatwise tensile strength and compressive properties of a fabricated Ni-based superalloy honeycomb sandwich coupon was studied at room temperature. A multilayered coating has been developed on the surface of the superalloy honeycomb TPS panel for environmental protection and thermal control. The oxidation weight-change results show that the weight change of the Ni-based superalloy honeycomb sandwich with the oxidation resistant coating is extremely small at 1100∘ C in air for 10 h. The emittance layer of the multilayered coating imparts an emittance in excess of 0.85 during exposure at 850∘ C, which was at least 14% greater than that of the substrate with oxidation resistant alone.

A theoretical study of passive control of duct noise using panels of varying compliance.

PubMed

Huang, L

2001-06-01

It is theoretically demonstrated that, in a duct, a substantial amount of sound energy can be transferred to flexural waves on a finite wall panel when the upstream portion of the panel is made to couple strongly with sound. The flexural wave then loses its energy either through radiating reflection sound waves or by internal friction. The effectiveness of the energy transfer and damping is greatly enhanced if the panel has a gradually decreasing in vacuo wave speed, which, in this study, is achieved by using a tapered membrane under tension. A high noise attenuation rate is possible with the usual viscoelastic materials such as rubber. The transmission loss has a broadband spectrum, and it offers an alternative to conventional duct lining where a smooth air passage is desired and nonacoustical considerations, such as chemical contamination or cost of operation maintenance, are important. Another advantage of the tapered panel is that, at very low frequencies, typically 5% of the first cut-on frequency of the duct, sound reflection occurs over the entire panel length. This supplements the inevitable drop in sound absorption coefficient, and a high transmission loss may still be obtained at very low frequencies.

Experimental and Theoretical Analysis of Sound Absorption Properties of Finely Perforated Wooden Panels

PubMed Central

Song, Boqi; Peng, Limin; Fu, Feng; Liu, Meihong; Zhang, Houjiang

2016-01-01

Perforated wooden panels are typically utilized as a resonant sound absorbing material in indoor noise control. In this paper, the absorption properties of wooden panels perforated with tiny holes of 1–3 mm diameter were studied both experimentally and theoretically. The Maa-MPP (micro perforated panels) model and the Maa-Flex model were applied to predict the absorption regularities of finely perforated wooden panels. A relative impedance comparison and full-factorial experiments were carried out to verify the feasibility of the theoretical models. The results showed that the Maa-Flex model obtained good agreement with measured results. Control experiments and measurements of dynamic mechanical properties were carried out to investigate the influence of the wood characteristics. In this study, absorption properties were enhanced by sound-induced vibration. The relationship between the dynamic mechanical properties and the panel mass-spring vibration absorption was revealed. While the absorption effects of wood porous structure were not found, they were demonstrated theoretically by using acoustic wave propagation in a simplified circular pipe with a suddenly changed cross-section model. This work provides experimental and theoretical guidance for perforation parameter design. PMID:28774063

A modelling approach for the vibroacoustic behaviour of aluminium extrusions used in railway vehicles

NASA Astrophysics Data System (ADS)

Xie, G.; Thompson, D. J.; Jones, C. J. C.

2006-06-01

Modern railway vehicles are often constructed from double walled aluminium extrusions, which give a stiff, light construction. However, the acoustic performance of such panels is less satisfactory, with the airborne sound transmission being considerably worse than the mass law for the equivalent simple panel. To compensate for this, vehicle manufacturers are forced to add treatments such as damping layers, absorptive layers and floating floors. Moreover, a model for extruded panels that is both simple and reliable is required to assist in the early stages of design. An statistical energy analysis (SEA) model to predict the vibroacoustic behaviour of aluminium extrusions is presented here. An extruded panel is represented by a single global mode subsystem and three subsystems representing local modes of the various strips which occur for frequencies typically above 500 Hz. An approximate model for the modal density of extruded panels is developed and this is verified using an FE model. The coupling between global and local modes is approximated with the coupling between a travelling global wave and uncorrelated local waves. This model enables the response difference across the panels to be predicted. For the coupling with air, the average radiation efficiency of a baffled extruded panel is modelled in terms of the contributions from global and local modes. Experimental studies of a sample extruded panel have also been carried out. The vibration of an extruded panel under mechanical excitation is measured for various force positions and the vibration distribution over the panel is obtained in detail. The radiation efficiencies of a free extruded panel have also been measured. The complete SEA model of a panel is finally used to predict the response of the extruded panel under mechanical and acoustic excitations. Especially for mechanical excitation, the proposed SEA model gives a good prediction compared with the measurement results.

Determination of Oriented Strandboard properties from a three-dimensional density distribution using the finite element method

NASA Astrophysics Data System (ADS)

Tackie, Alan Derek Nii

Computer modeling of Oriented Strand Board (OSB) properties has gained widespread attention with numerous models created to better understand OBS behavior. Recent models allow researchers to observe multiple variables such as changes in moisture content, density and resin effects on panel performance. Thickness-swell variation influences panel durability and often has adverse effects on a structural panel's bending stiffness. The prediction of out-of-plane swell under changing moisture conditions was, therefore, the essence for developing a model in this research. The finite element model accounted for both vertical and horizontal density variations, the three-dimensional (3D) density variation of the board. The density variation, resulting from manufacturing processes, affects the uniformity of thickness-swell in OSB and is often exacerbated by continuous sorption of moisture that leads to potentially damaging internal stresses in the panel. The overall thickness-swell (the cumulative swell from non-uniform horizontal density profile, panel swell from free water, and spring-back from panel compression) was addressed through the finite element model in this research. The pursued goals in this study were, first and foremost, the development of a robust and comprehensive finite element model which integrated several component studies to investigate the effects of moisture variation on the out-of-plane thickness-swell of OSB panels, and second, the extension of the developed model to predict panel stiffness. It is hoped that this paper will encourage researchers to adopt the 3D density distribution approach as a viable approach to analyzing the physical and mechanical properties of OSB.

Probabilistic Structural Evaluation of Uncertainties in Radiator Sandwich Panel Design

NASA Technical Reports Server (NTRS)

Kuguoglu, Latife; Ludwiczak, Damian

2006-01-01

The Jupiter Icy Moons Orbiter (JIMO) Space System is part of the NASA's Prometheus Program. As part of the JIMO engineering team at NASA Glenn Research Center, the structural design of the JIMO Heat Rejection Subsystem (HRS) is evaluated. An initial goal of this study was to perform sensitivity analyses to determine the relative importance of the input variables on the structural responses of the radiator panel. The desire was to let the sensitivity analysis information identify the important parameters. The probabilistic analysis methods illustrated here support this objective. The probabilistic structural performance evaluation of a HRS radiator sandwich panel was performed. The radiator panel structural performance was assessed in the presence of uncertainties in the loading, fabrication process variables, and material properties. The stress and displacement contours of the deterministic structural analysis at mean probability was performed and results presented. It is followed by a probabilistic evaluation to determine the effect of the primitive variables on the radiator panel structural performance. Based on uncertainties in material properties, structural geometry and loading, the results of the displacement and stress analysis are used as an input file for the probabilistic analysis of the panel. The sensitivity of the structural responses, such as maximum displacement and maximum tensile and compressive stresses of the facesheet in x and y directions and maximum VonMises stresses of the tube, to the loading and design variables is determined under the boundary condition where all edges of the radiator panel are pinned. Based on this study, design critical material and geometric parameters of the considered sandwich panel are identified.

Mean reversion in the current account of forty-eight african countries: Evidence from the Panel SURADF test

NASA Astrophysics Data System (ADS)

Chu, Hsiao-Ping; Chang, Tsangyao; Chang, Hsu-Ling; Su, Chi-Wei; Yuan, Young

2007-10-01

Here, the Panel seemingly unrelated regressions augmented Dickey-Fuller test (SURADF) test, first introduced and advanced by Breuer et al. [Misleading inferences from panel unit-root tests with an illustration from purchasing power parity, Rev. Int. Econ. 9(3) (2001) 482-493], is used to investigate the mean-reverting behavior of the current account of 48 African countries during the 1980-2004 periods. The empirical results from numerous panel-based unit root tests, conducted earlier, indicated that the current account of each of these countries is stationary; however, when Breuer et al.'s (2001) Panel SURADF test is conducted, it is found that a unit root exists in the current account of 11 of the countries studied. These results have one extremely important policy implication for the 48 African countries studied: the current account deficit of most is sustainable, and thus signifying that those nations should have no incentive to default on their international debt.

Robust estimation procedure in panel data model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shariff, Nurul Sima Mohamad; Hamzah, Nor Aishah

2014-06-19

The panel data modeling has received a great attention in econometric research recently. This is due to the availability of data sources and the interest to study cross sections of individuals observed over time. However, the problems may arise in modeling the panel in the presence of cross sectional dependence and outliers. Even though there are few methods that take into consideration the presence of cross sectional dependence in the panel, the methods may provide inconsistent parameter estimates and inferences when outliers occur in the panel. As such, an alternative method that is robust to outliers and cross sectional dependencemore » is introduced in this paper. The properties and construction of the confidence interval for the parameter estimates are also considered in this paper. The robustness of the procedure is investigated and comparisons are made to the existing method via simulation studies. Our results have shown that robust approach is able to produce an accurate and reliable parameter estimates under the condition considered.« less

Nonlinear panel flutter in a rarefied atmosphere - Aerodynamic shear stress effects

NASA Technical Reports Server (NTRS)

Resende, Hugo B.

1991-01-01

The panel flutter phenomenon is studied assuming free-molecule flow. This kind of analysis is relevant in the case of hypersonic flight vehicles traveling at high altitudes, especially in the leeward portion of the vehicle. In these conditions the aerodynamic shear can be expected to be considerably larger than the pressure at a given point, so that the effects of such a loading are incorporated into the structural model. This is accomplished by introducing distributed longitudinal and bending moment loads. The former can lead to buckling of the panel, with the second mode in the case of a simply-supported panel playing a important role, and becoming the dominant mode in the solution. The presence of equivalent springs in the longitudinal direction at the panel's ends also becomes of relative importance, even for the evaluation of the linear flutter parameter. Finally, the behavior of the system is studied in the presence of applied compressive forces, that is, classical buckling.

Regression analysis of mixed recurrent-event and panel-count data

PubMed Central

Zhu, Liang; Tong, Xinwei; Sun, Jianguo; Chen, Manhua; Srivastava, Deo Kumar; Leisenring, Wendy; Robison, Leslie L.

2014-01-01

In event history studies concerning recurrent events, two types of data have been extensively discussed. One is recurrent-event data (Cook and Lawless, 2007. The Analysis of Recurrent Event Data. New York: Springer), and the other is panel-count data (Zhao and others, 2010. Nonparametric inference based on panel-count data. Test 20, 1–42). In the former case, all study subjects are monitored continuously; thus, complete information is available for the underlying recurrent-event processes of interest. In the latter case, study subjects are monitored periodically; thus, only incomplete information is available for the processes of interest. In reality, however, a third type of data could occur in which some study subjects are monitored continuously, but others are monitored periodically. When this occurs, we have mixed recurrent-event and panel-count data. This paper discusses regression analysis of such mixed data and presents two estimation procedures for the problem. One is a maximum likelihood estimation procedure, and the other is an estimating equation procedure. The asymptotic properties of both resulting estimators of regression parameters are established. Also, the methods are applied to a set of mixed recurrent-event and panel-count data that arose from a Childhood Cancer Survivor Study and motivated this investigation. PMID:24648408

Postbuckling behavior of graphite-epoxy panels

NASA Technical Reports Server (NTRS)

Starnes, J. H., Jr.; Dickson, J. N.; Rouse, M.

1984-01-01

Structurally efficient fuselage panels are often designed to allow buckling to occur at applied loads below ultimate. Interest in applying graphite-epoxy materials to fuselage primary structure led to several studies of the post-buckling behavior of graphite-epoxy structural components. Studies of the postbuckling behavior of flat and curved, unstiffened and stiffened graphite-epoxy panels loaded in compression and shear were summarized. The response and failure characteristics of specimens studied experimentally were described, and analytical and experimental results were compared. The specimens tested in the studies described were fabricated from commercially available 0.005-inch-thick unidirectional graphite-fiber tapes preimpregnated with 350 F cure thermosetting epoxy resins.